Staphylococcus haemolyticus as an Important Hospital Pathogen and Carrier of Methicillin Resistance Genes

PubMed Central

Barros, E. M.; Ceotto, H.; Bastos, M. C. F.; dos Santos, K. R. N.

2012-01-01

Phenotypic and molecular methods were used to characterize the antibiotic resistance of 64 clinical isolates of Staphylococcus haemolyticus. By PCR of the mecA gene, 87% were found to be methicillin resistant. Approximately 55% harbored staphylococcal cassette chromosome mec element (SCCmec) type V, and only one SCCmec type IV. Many isolates (75%) displayed multiresistance, and pulsotype analysis showed a high diversity. PMID:21976766

Staphylococcal cassette chromosome mec characterization of methicillin-resistant Staphylococcus aureus strains isolated at the military hospital of Constantine/Algeria.

PubMed

Ouchenane, Z; Agabou, A; Smati, F; Rolain, J-M; Raoult, D

2013-12-01

Staphylococcal cassette chromosome mec is a genetic mobile element that carries the gene mecA mediating the methicillin resistance in staphylococci. The aim of this study is to type the Staphylococcal cassette chromosome mec (SCCmec) in 64 non-redundant methicillin-resistant Staphylococcus aureus (MRSA) strains recovered at the military hospital of Constantine (Algeria) between 2005 and 2007. Methicillin resistance was detected by oxacillin and cefoxitin discs and PBP2a test, and then confirmed by mecA PCR. The SCCmec complex types were determined by real time PCR. The analysis showed that 50 isolates were hospital acquired (HA-MRSA) and 14 were community-acquired (CA-MRSA). SCCmec type IV and V (traditionally attributed to CA-MRSA) were harbored by both HA-MRSA and CA-MRSA, while SCCmec type I, II and III were not recorded. These findings motivate more investigations to be carried on HA-MRSA in our hospital and other national health care centers. Copyright © 2013. Published by Elsevier SAS.

Characterization of Staphylococcus aureus faecal isolates associated with food-borne disease in Korea.

PubMed

Shin, E; Hong, H; Park, J; Oh, Y; Jung, J; Lee, Y

2016-07-01

To characterize Staphylococcus aureus faecal isolates from people suspected to be infected with food poisoning by using antimicrobial susceptibility testing and molecular techniques. A total of 340 Staph. aureus isolates from 6226 people suspected to be infected with food poisoning were identified and characterized by biochemical methods, antimicrobial susceptibility testing and PCR. Samples were obtained from January 2006 to December 2008 from the National Notifiable Diseases Surveillance System at the Research Institute of Public Health and Environment in Seoul Metropolitan, Korea. All strains carried at least one of the eight staphylococcal enterotoxin (se) genes tested and a total of 27 se profiles were produced; the most frequent se profile was seg-sei and the next was sea. Among the total isolates, 36 methicillin-resistant Staphylococcus aureus (MRSAs) isolates were further analysed by multilocus sequence typing (MLST), Staphylococcal cassette chromosome mec (SCCmec) typing, pulsed-field gel electrophoresis (PFGE) and PCR detection for pvl. ST72-SCCmec type IV was the most predominant clone (27 isolates, 75%) followed by ST1-SCCmec type IV (five isolates, 13·8%), ST20-SCCmec type IV (one isolate, 2·8%), ST493-SCCmec type IV (one isolate, 2·8%), ST903-SCCmec type IV (one isolate, 2·8%) and ST5-SCCmec type II (one isolate, 2·8%). By PFGE typing, MRSAs isolated during the same period were grouped together although they were isolated from different regions. None of MRSAs had PVL gene and nine MRSAs were multidrug resistant. Analysis of MRSAs by MLST, SCCmec typing, PFGE and pvl detection showed that the majority of strain associated with food-borne diseases belonged to a Korean community-acquired (CA) MRSA clone with ST72-SCCmec type IV-PVL negative-SEG/SEI and its variations while one strain was hospital-acquired (HA) MRSA. CA-MRSA clone which possessed ST72-SCCmec type IV-PVL negative-SEG/SEI was spread most commonly among MRSAs that were associated with food-borne diseases. This is the first report of ST903 strain in Korea. © 2016 The Society for Applied Microbiology.

Comparative Genotypes, Staphylococcal Cassette Chromosome mec (SCCmec) Genes and Antimicrobial Resistance amongst Staphylococcus epidermidis and Staphylococcus haemolyticus Isolates from Infections in Humans and Companion Animals.

PubMed

McManus, Brenda A; Coleman, David C; Deasy, Emily C; Brennan, Gráinne I; O' Connell, Brian; Monecke, Stefan; Ehricht, Ralf; Leggett, Bernadette; Leonard, Nola; Shore, Anna C

2015-01-01

This study compares the characteristics of Staphylococcus epidermidis (SE) and Staphylococcus haemolyticus (SH) isolates from epidemiologically unrelated infections in humans (Hu) (28 SE-Hu; 8 SH-Hu) and companion animals (CpA) (12 SE-CpA; 13 SH-CpA). All isolates underwent antimicrobial susceptibility testing, multilocus sequence typing and DNA microarray profiling to detect antimicrobial resistance and SCCmec-associated genes. All methicillin-resistant (MR) isolates (33/40 SE, 20/21 SH) underwent dru and mecA allele typing. Isolates were predominantly assigned to sequence types (STs) within a single clonal complex (CC2, SE, 84.8%; CC1, SH, 95.2%). SCCmec IV predominated among MRSE with ST2-MRSE-IVc common to both Hu (40.9%) and CpA (54.5%). Identical mecA alleles and nontypeable dru types (dts) were identified in one ST2-MRSE-IVc Hu and CpA isolate, however, all mecA alleles and 2/4 dts detected among 18 ST2-MRSE-IVc isolates were closely related, sharing >96.5% DNA sequence homology. Although only one ST-SCCmec type combination (ST1 with a non-typeable [NT] SCCmec NT9 [class C mec and ccrB4]) was common to four MRSH-Hu and one MRSH-CpA, all MRSH isolates were closely related based on similar STs, SCCmec genes (V/VT or components thereof), mecA alleles and dts. Overall, 39.6% of MR isolates harbored NT SCCmec elements, and ACME was more common amongst MRSE and CpA isolates. Multidrug resistance (MDR) was detected among 96.7% of isolates but they differed in the prevalence of specific macrolide, aminoglycoside and trimethoprim resistance genes amongst SE and SH isolates. Ciprofloxacin, rifampicin, chloramphenicol [fexA, cat-pC221], tetracycline [tet(K)], aminoglycosides [aadD, aphA3] and fusidic acid [fusB] resistance was significantly more common amongst CpA isolates. SE and SH isolates causing infections in Hu and CpA hosts belong predominantly to STs within a single lineage, harboring similar but variable SCCmec genes, mecA alleles and dts. Host and staphylococcal species-specific characteristics were identified in relation to antimicrobial resistance genes and phenotypes, SCCmec and ACME.

Comparative Genotypes, Staphylococcal Cassette Chromosome mec (SCCmec) Genes and Antimicrobial Resistance amongst Staphylococcus epidermidis and Staphylococcus haemolyticus Isolates from Infections in Humans and Companion Animals

PubMed Central

McManus, Brenda A.; Coleman, David C.; Deasy, Emily C.; Brennan, Gráinne I.; O’ Connell, Brian; Monecke, Stefan; Ehricht, Ralf; Leggett, Bernadette; Leonard, Nola; Shore, Anna C.

2015-01-01

This study compares the characteristics of Staphylococcus epidermidis (SE) and Staphylococcus haemolyticus (SH) isolates from epidemiologically unrelated infections in humans (Hu) (28 SE-Hu; 8 SH-Hu) and companion animals (CpA) (12 SE-CpA; 13 SH-CpA). All isolates underwent antimicrobial susceptibility testing, multilocus sequence typing and DNA microarray profiling to detect antimicrobial resistance and SCCmec-associated genes. All methicillin-resistant (MR) isolates (33/40 SE, 20/21 SH) underwent dru and mecA allele typing. Isolates were predominantly assigned to sequence types (STs) within a single clonal complex (CC2, SE, 84.8%; CC1, SH, 95.2%). SCCmec IV predominated among MRSE with ST2-MRSE-IVc common to both Hu (40.9%) and CpA (54.5%). Identical mecA alleles and nontypeable dru types (dts) were identified in one ST2-MRSE-IVc Hu and CpA isolate, however, all mecA alleles and 2/4 dts detected among 18 ST2-MRSE-IVc isolates were closely related, sharing >96.5% DNA sequence homology. Although only one ST-SCCmec type combination (ST1 with a non-typeable [NT] SCCmec NT9 [class C mec and ccrB4]) was common to four MRSH-Hu and one MRSH-CpA, all MRSH isolates were closely related based on similar STs, SCCmec genes (V/VT or components thereof), mecA alleles and dts. Overall, 39.6% of MR isolates harbored NT SCCmec elements, and ACME was more common amongst MRSE and CpA isolates. Multidrug resistance (MDR) was detected among 96.7% of isolates but they differed in the prevalence of specific macrolide, aminoglycoside and trimethoprim resistance genes amongst SE and SH isolates. Ciprofloxacin, rifampicin, chloramphenicol [fexA, cat-pC221], tetracycline [tet(K)], aminoglycosides [aadD, aphA3] and fusidic acid [fusB] resistance was significantly more common amongst CpA isolates. SE and SH isolates causing infections in Hu and CpA hosts belong predominantly to STs within a single lineage, harboring similar but variable SCCmec genes, mecA alleles and dts. Host and staphylococcal species-specific characteristics were identified in relation to antimicrobial resistance genes and phenotypes, SCCmec and ACME. PMID:26379051

Impact of psm-mec in the mobile genetic element on the clinical characteristics and outcome of SCCmec-II methicillin-resistant Staphylococcus aureus bacteraemia in Japan.

PubMed

Aoyagi, T; Kaito, C; Sekimizu, K; Omae, Y; Saito, Y; Mao, H; Inomata, S; Hatta, M; Endo, S; Kanamori, H; Gu, Y; Tokuda, K; Yano, H; Kitagawa, M; Kaku, M

2014-09-01

Over-expression of alpha-phenol-soluble modulins (PSMs) results in high virulence of community-associated methicillin-resistant Staphylococcus aureus (MRSA). The psm-mec gene, located in the mobile genetic element SCCmec-II, suppresses PSMαs production. Fifty-two patients with MRSA bacteraemia were enrolled. MRSA isolates were evaluated with regard to the psm-mec gene sequence, bacterial virulence, and the minimum inhibitory concentration (MIC) of vancomycin and teicoplanin. Fifty-one MRSA isolates were classified as SCCmec-II, and 10 had one point mutation in the psm-mec promoter. We compared clinical characteristics and outcomes between mutant MRSA and wild-type MRSA. Production of PSMα3 in mutant MRSA was significantly increased, but biofilm formation was suppressed. Wild-type MRSA caused more catheter-related bloodstream infections (30/41 vs. 3/10, p 0.0028), whereas mutant MRSA formed more deep abscesses (4/10 vs. 3/41, p 0.035). Bacteraemia caused by mutant MRSA was associated with reduced 30-day mortality (1/10 vs. 13/41, p 0.25), although this difference was not significant. The MIC90 of teicoplanin was higher for wild-type MRSA (1.5 mg/L vs. 1 mg/L), but the MIC of vancomycin was not different between the two groups. The 30-day mortality of MRSA with a high MIC of teicoplanin (≥1.5 mg/L) was higher than that of strains with a lower MIC (≤0.75 mg/L) (6/10 vs. 6/33, p 0.017). Mutation of the psm-mec promoter contributes to virulence of SCCmec-II MRSA, and the product of psm-mec may determine the clinical characteristics of bacteraemia caused by SCCmec-II MRSA, but it does not affect mortality. © 2014 The Authors Clinical Microbiology and Infection © 2014 European Society of Clinical Microbiology and Infectious Diseases.

High prevalence of mec complex C and ccrC is independent of SCCmec type V in Staphylococcus haemolyticus.

PubMed

Bouchami, O; Ben Hassen, A; de Lencastre, H; Miragaia, M

2012-04-01

Staphylococcus haemolyticus is one of the most clinically relevant coagulase-negative staphylococci (CoNS), particularly in immunocompromised patients; however, little is known regarding its molecular epidemiology. In this work, we characterized the genetic background and the SCCmec region of 36 methicillin-resistant S. haemolyticus (MRSHae) and 10 methicillin-susceptible S. haemolyticus (MSSHae) collected from neutropenic patients in Tunisia between 2002 and 2004. The molecular characterization of MRSHae by pulsed-field gel electrophoresis (PFGE) showed that the great majority of the isolates (77.8%) belonged to only four types. SCCmec typing by polymerase chain reaction (PCR) and Southern hybridization showed that isolates belonging to each PFGE type could carry either one or two SCCmec types. SCCmec V was the most common, but mec complex C was frequently associated to ccr allotypes other than ccrC. The mec complex class C was predominant in MRSHae (47%) and ccrC was predominant among both methicillin-resistant and -susceptible isolates (31 and 50%, respectively). Interestingly, one half (50%) of the MRSHae isolates analyzed lacked the known ccr complexes (ccrAB and ccrC), although they carried the mecA. Conversely, all MSSHae carrying a ccrC complex were multidrug-resistant, although they lack the mecA. The results suggest that ccrC and mec complex C are frequent and may exist autonomously and independently of SCCmec type V in S. haemolyticus. Moreover, the data obtained suggest that small chromosomal rearrangements promoting the loss or structural variation of mec and ccr complex appear to occur frequently, which probably provide S. haemolyticus with a specialized means for SCCmec trapping and/or diversification.

USA300-related methicillin-resistant Staphylococcus aureus clone is the predominant cause of community and hospital MRSA infections in Colombian children.

PubMed

Márquez-Ortiz, Ricaurte Alejandro; Álvarez-Olmos, Martha I; Escobar Pérez, Javier Antonio; Leal, Aura Lucia; Castro, Betsy Esperanza; Mariño, Ana Cristina; Barrero, Esther Rocio; Mujica, Sandra Celina; Gaines, Sebastián; Vanegas, Natasha

2014-08-01

Community-genotype methicillin-resistant Staphylococcus aureus (CG-MRSA) isolates are known to be more virulent and clinically aggressive in children. The goal of the present study was characterize the molecular epidemiology of MRSA isolates causing infections in Colombian children. An observational and prospective study was conducted between April 2009 and June 2011 at 15 hospitals in Bogotá, Colombia. A detailed epidemiological profile was made of 162 children infected with MRSA. The isolates were subjected to antimicrobial susceptibility testing, molecular characterization including 21 virulence genes, SCCmec, spa and agr typing, multilocus sequence typing (MLST), and pulsed-field gel electrophoresis (PFGE). Among all isolates included in the study, 85.8% were obtained from patients whose infectious process was initiated in the community; of these, 69,8% occurred in patients without healthcare-associated risk factors. The molecular characterization of the isolates showed a high proportion (95.1%) containing a community-genotype profile with a high prevalence of SCCmec type IV, PVL-positives, and also related to CC8. Most CG-MRSA isolates (143, 92.9%) were genetically related to the pandemic clone USA300, differing by the presence of SCCmec IVc and the absence of the arginine catabolic mobile element (ACME). An increase in the frequency of CG-MRSA infections has been reported worldwide. In this study we found that almost all MRSA infections in our pediatric population were caused by community-genotype isolates, supporting the success of the CG-MRSA clones. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Staphylococcus xylosus Isolate with a New mecC Allotype

PubMed Central

Harrison, Ewan M.; Paterson, Gavin K.; Holden, Matthew T. G.; Morgan, Fiona J. E.; Larsen, Anders Rhod; Petersen, Andreas; Leroy, Sabine; De Vliegher, Sarne; Perreten, Vincent; Fox, Lawrence K.; Lam, Theo J. G. M.; Sampimon, Otlis C.; Zadoks, Ruth N.; Peacock, Sharon J.; Parkhill, Julian

2013-01-01

Recently, a novel variant of mecA known as mecC (mecALGA251) was identified in Staphylococcus aureus isolates from both humans and animals. In this study, we identified a Staphylococcus xylosus isolate that harbors a new allotype of the mecC gene, mecC1. Whole-genome sequencing revealed that mecC1 forms part of a class E mec complex (mecI-mecR1-mecC1-blaZ) located at the orfX locus as part of a likely staphylococcal cassette chromosome mec element (SCCmec) remnant, which also contains a number of other genes present on the type XI SCCmec. PMID:23274660

Inhibition of Exotoxin Production by Mobile Genetic Element SCCmec-Encoded psm-mec RNA Is Conserved in Staphylococcal Species

PubMed Central

Saito, Yuki; Mao, Han; Sekimizu, Kazuhisa; Kaito, Chikara

2014-01-01

Staphylococcal species acquire antibiotic resistance by incorporating the mobile-genetic element SCCmec. We previously found that SCCmec-encoded psm-mec RNA suppresses exotoxin production as a regulatory RNA, and the psm-mec translation product increases biofilm formation in Staphylococcus aureus. Here, we examined whether the regulatory role of psm-mec on host bacterial virulence properties is conserved among other staphylococcal species, S. epidermidis and S. haemolyticus, both of which are important causes of nosocomial infections. In S. epidermidis, introduction of psm-mec decreased the production of cytolytic toxins called phenol-soluble modulins (PSMs) and increased biofilm formation. Introduction of psm-mec with a stop-codon mutation that did not express PSM-mec protein but did express psm-mec RNA also decreased PSM production, but did not increase biofilm formation. Thus, the psm-mec RNA inhibits PSM production, whereas the PSM-mec protein increases biofilm formation in S. epidermidis. In S. haemolyticus, introduction of psm-mec decreased PSM production, but did not affect biofilm formation. The mutated psm-mec with a stop-codon also caused the same effect. Thus, the psm-mec RNA also inhibits PSM production in S. haemolyticus. These findings suggest that the inhibitory role of psm-mec RNA on exotoxin production is conserved among staphylococcal species, although the stimulating effect of the psm-mec gene on biofilm formation is not conserved. PMID:24926994

[Molecular epidemiology of methicillin-resistant Staphylococcus aureus isolates with toxic shock syndrome toxin and staphylococcal enterotoxin C genes].

PubMed

Kim, Jae Seok; Kim, Han Sung; Song, Wonkeun; Cho, Hyoun Chan; Lee, Kyu Man; Kim, Eui Chong

2007-04-01

Many methicillin-resistant Staphylococcus aureus (MRSA) isolates in Korea possess a specific profile of staphylococcal enterotoxins in that the toxic shock syndrome toxin gene (tst) coexists with the staphylococcal enterotoxin C gene (sec). Because the analysis of staphylococcal cassette chromosome mec (SCCmec), a mobile genetic element mecA gene encoding methicillin resistance, showed that majority of these are SCCmec type II, these MRSA isolates with tst and sec may be genetically related with each other. This study was performed to investigate the genetic relatedness of tstand sec-harboring MRSA strains isolated in Korea by using pulsed-field gel electrophoresis (PFGE). A total of 59 strains of MRSA isolates of SCCmec type II possessing tst and sec were selected for PFGE and phylogenetic analyses. These isolates were collected from 13 health care facilities during nationwide surveillance of antimicrobial resistance in 2002. The 59 MRSA isolates were clustered into 11 PFGE types, including one major group of 26 strains (44.1%) isolated from 7 healthcare facilities. Seven PFGE types contained 2 or more isolates each, comprising 55 isolates in total. Most of SCCmec type II MRSA isolates containing tst and sec showed closely related PFGE patterns. Moreover, MRSA isolates collected from different healthcare facilities showed identical PFGE patterns. These findings suggested a clonal spread of MRSA strains possessing tst and sec in Korean hospitals.

Methicillin-resistant Staphylococcus aureus isolates with SCCmec type V and spa types t437 or t1081 associated to discordant susceptibility results between oxacillin and cefoxitin, Central Taiwan.

PubMed

Ho, Cheng-Mao; Lin, Chien-Yu; Ho, Mao-Wang; Lin, Hsiao-Chuan; Chen, Chao-Jung; Lin, Lee-Chung; Lu, Jang-Jih

2016-12-01

Staphylococcus aureus isolates with discordant susceptibility results between oxacillin and cefoxitin obtained using automated microbiology systems are infrequently observed. From April 2013 to December 2014, 1956 methicillin-resistant S. aureus (MRSA) and 1761 methicillin-susceptible S. aureus isolates were obtained from different patients. Forty isolates (1.1% and 2% in case of S. aureus and MRSA, respectively) with discordant susceptibility results (oxacillin susceptible and cefoxitin resistant) and carrying mecA gene were obtained. Except 2 SCCmec type IV isolates, 38 MRSA isolates were all SCCmec type V (V T or non-V T ), which were further divided into V T (n=22) and non-V T (n=16). The most common spa type in V T and non-V T isolates were t437 (n=19) and t1081 (n=13), respectively. Only 55% of patients received effective antimicrobial agents; 2 mortalities were not attributable to MRSA infection. Using standard agar dilution, 17 MRSA isolates (0.46% and 0.87% in case of S. aureus and MRSA, respectively) had oxacillin MIC in the susceptible ranges (oxacillin-susceptible MRSA [OS-MRSA]); all carried SCCmec type V (V T , n=8; non-V T , n=9). The most common spa-MLST types of OS-MRSA in V T and non-V T were t437-ST59 (n=4) and t1081-ST45 (n=7), respectively. Concomitant testing by both cefoxitin- and oxacillin-based methods is a practical strategy for OS-MRSA detection in the clinical laboratories. Continuous monitoring of OS-MRSA isolates is necessary to elucidate their impact in clinical infectious diseases. Copyright © 2016 Elsevier Inc. All rights reserved.

Continued expansion of USA300-like methicillin-resistant Staphylococcus aureus (MRSA) among hospitalized patients in the United States.

PubMed

Tickler, Isabella A; Goering, Richard V; Mediavilla, Jose R; Kreiswirth, Barry N; Tenover, Fred C

2017-08-01

We characterized spa types, SCCmec types, and antimicrobial resistance patterns of 516 methicillin-resistant Staphylococcus aureus (MRSA) isolates, collected between 2011 and 2014 from nares and blood cultures of United States patients. Among nares isolates, 45 spa types were observed; 29.9% were t002/SCCmec II and 30.9% were t008/SCCmec IV. Among blood isolates, 40 spa types were identified; 24.4% were t002/SCCmec II and 39.9% were type t008/SCCmec IV. Compared to data from our 2009-2010 survey, the percentage of t008/SCCmec IV isolates from nares increased significantly (20.4%-30.9%; P=0.004) while the percentage from positive blood cultures remained similar (39.2% versus 39.9%; P=0.921). There were also significant changes in the overall antimicrobial resistance patterns observed, including the decrease of the clindamycin, erythromycin, levofloxacin and moxifloxacin multidrug resistance pattern, likely the result of t002/SCCmec II strains being displaced by t008/SCCmec IV strains. Rates of high-level mupirocin resistance did not change significantly from our past study (4.1% compared to 4.7%; P=0.758) but an increase in low-level resistance, particularly among t002/SCCmec II isolates, was observed. Copyright © 2017 Elsevier Inc. All rights reserved.

Inferring a Population Structure for Staphylococcus epidermidis from Multilocus Sequence Typing Data▿

PubMed Central

Miragaia, M.; Thomas, J. C.; Couto, I.; Enright, M. C.; de Lencastre, H.

2007-01-01

Despite its importance as a human pathogen, information on population structure and global epidemiology of Staphylococcus epidermidis is scarce and the relative importance of the mechanisms contributing to clonal diversification is unknown. In this study, we addressed these issues by analyzing a representative collection of S. epidermidis isolates from diverse geographic and clinical origins using multilocus sequence typing (MLST). Additionally, we characterized the mobile element (SCCmec) carrying the genetic determinant of methicillin resistance. The 217 S. epidermidis isolates from our collection were split by MLST into 74 types, suggesting a high level of genetic diversity. Analysis of MLST data using the eBURST algorithm revealed the existence of nine epidemic clonal lineages that were disseminated worldwide. One single clonal lineage (clonal complex 2) comprised 74% of the isolates, whereas the remaining isolates were clustered into 8 minor clonal lineages and 13 singletons. According to our evolutionary model, SCCmec was acquired at least 56 times by S. epidermidis. Although geographic dissemination of S. epidermidis strains and the value of the index of association between the alleles, 0.2898 (P < 0.05), support the clonality of S. epidermidis species, examination of the sequence changes at MLST loci during clonal diversification showed that recombination gives rise to new alleles approximately twice as frequently as point mutations. We suggest that S. epidermidis has a population with an epidemic structure, in which nine clones have emerged upon a recombining background and evolved quickly through frequent transfer of genetic mobile elements, including SCCmec. PMID:17220222

Analysis of Staphylococcal cassette chromosome mec in Staphylococcus haemolyticus and Staphylococcus sciuri: identification of a novel ccr gene complex with a newly identified ccrA allotype (ccrA7).

PubMed

Urushibara, Noriko; Paul, Shyamal Kumar; Hossain, Mohammad Akram; Kawaguchiya, Mitsuyo; Kobayashi, Nobumichi

2011-06-01

Methicillin resistance in staphylococci is conferred by the acquisition in its chromosome of the mecA gene, which is located on a mobile genetic element called staphylococcal cassette chromosome mec (SCCmec). Genetic type of SCCmec is defined by combination of mec gene complex class and cassette chromosome recombinase gene (ccr) allotype. In this study, we analyzed genetic diversity of the SCCmec in 11 Staphylococcus haemolyticus strains and a Staphylococcus sciuri strain, which were recently isolated from clinical specimens in Bangladesh. Among these strains, only two S. haemolyticus strains were proved to have the known types of SCCmec, that is, SCCmec V (class C2 mec-ccrC) and VII (class C1 mec-ccrC). Five S. haemolyticus strains were assigned two unique mec-ccr gene complexes combination; that is, class C1 mec-ccrA4B4 (four isolates) and class A mec-ccrC (one isolate). In the remaining four S. haemolyticus strains with class C1 mec, no known ccr allotypes could be detected. A single S. sciuri strain with class A mec complex carried a ccrA gene belonging to a novel allotype designated ccrA7, together with ccrB3. The ccrA7 gene in the S. sciuri strain showed 61.7%-82.7% sequence identity to the ccrA gene sequences published so far, and 75.3% identity to ccrA3, which is a component of the type 3 ccr complex (ccrA3-ccrB3) in methicillin-resistant Staphylococcus aureus. The results of the present study indicated that mec gene complex and ccr genes in coagulase-negative staphylococci are highly divergent, and distinct from those of common methicillin-resistant S. aureus. Identification of the novel ccrA7 allotype combined with ccrB3 suggested an occurrence of recombination between different ccr complexes in nature.

Characterisation of virulence genes in methicillin susceptible and resistant Staphylococcus aureus isolates from a paediatric population in a university hospital of Medellín, Colombia.

PubMed

Jiménez, Judy Natalia; Ocampo, Ana María; Vanegas, Johanna Marcela; Rodríguez, Erika Andrea; Garcés, Carlos Guillermo; Patiño, Luz Adriana; Ospina, Sigifredo; Correa, Margarita María

2011-12-01

Virulence and antibiotic resistance are significant determinants of the types of infections caused by Staphylococcus aureus and paediatric groups remain among the most commonly affected populations. The goal of this study was to characterise virulence genes of methicillin-susceptible S. aureus (MSSA) and methicillin-resistant S. aureus (MRSA) strains isolated from a paediatric population of a Colombian University Hospital during 2009. Sixty MSSA and MRSA isolates were obtained from paediatric patients between zero-14 years. We identified the genes encoding virulence factors, which included Panton-Valentine leucocidine (PVL), staphylococcal enterotoxins A-E, exfoliative toxins A and B and toxic shock syndrome toxin 1. Typing of the staphylococcal chromosome cassette mec (SCCmec) was performed in MRSA strains. The virulence genes were more diverse and frequent in MSSA than in MRSA isolates (83% vs. 73%). MRSA strains harboured SCCmec types IVc (60%), I (30%), IVa (7%) and V (3%). SCCmec type IVc isolates frequently carried the PVL encoding genes and harboured virulence determinants resembling susceptible strains while SCCmec type I isolates were often negative. PVL was not exclusive to skin and soft tissue infections. As previously suggested, these differences in the distribution of virulence factor genes may be due to the fitness cost associated with methicillin resistance.

Genetic diversity of methicillin resistant Staphylococcus aureus strains isolated from burn patients in Iran: ST239-SCCmec III/t037 emerges as the major clone.

PubMed

Goudarzi, Mehdi; Bahramian, Mahnaz; Satarzadeh Tabrizi, Mahboobeh; Udo, Edet E; Figueiredo, Agnes Marie Sá; Fazeli, Maryam; Goudarzi, Hossein

2017-04-01

Methicillin-resistant Staphylococcus aureus (MRSA) as a major cause of infection in health care, hospital and community settings is a global health concern. The purpose of this study was to determine the antibiotic susceptibility pattern and distribution of circulating molecular types of MRSA in a burn hospital in Tehran, the capital of Iran. During a 10-month study period, 106 Staphylococcus aureus isolates were assessed. Isolates were subjected to susceptibility testing using the disk diffusion method and Polymerase Chain Reaction (PCR) for detection of mecA, fem and nuc genes. The presence of PVL and tst encoding genes were determined by PCR method. All the MRSA isolates were genotyped by multilocus sequence typing (MLST), spa typing, SCCmec typing and agr typing. The presence of mecA gene was confirmed in all the Staphylococcus aureus isolates. Antimicrobial susceptibility testing revealed a high resistance rate (90.6%) to ampicillin, tetracycline, and erythromycin. The rates of resistance to remaining antibiotics tested varied between 18.9% and 84.9%. The high- level of resistance to mupirocin was confirmed in 19.8% of MRSA strains isolated from burn patients. Multi-drug resistance was observed in 90.6% of isolates. Sixteen of the 106 MRSA isolates (15.1%) harbored PVL-encoding genes. The majority of our MRSA strains carried SCCmec III (71.7%). ST239-SCCmec III/t037 (34%) was the most common genotype followed by ST239-SCCmec III/t030 (24.5%), ST15-SCCmec IV/t084 (15.1%), ST22-SCCmec IV/t790 (13.2%), and ST239-SCCmec III/t631 (13.2%). Mupirocin resistant MRSA isolates belonged to ST15-SCCmec IV/t084 (40%), ST22-SCCmec IV/t790 (23.3%), ST239-SCCmec III/t631 (20%), and ST239-SCCmec III/t030 (16.7%) clones. The results showed that genetically diverse strains of MRSA are circulating in our burn hospitals with relatively high prevalence of ST239-SCCmec III/t037 clone. The findings support the need for regular surveillance of MRSA to determine the distribution of existing MRSA clones and to detect the emergence of new MRSA clones. Copyright © 2017 Elsevier Ltd. All rights reserved.

Occurrence and molecular characteristics of methicillin-resistant Staphylococcus aureus and methicillin-resistant Staphylococcus pseudintermedius in an academic veterinary hospital.

PubMed

Ishihara, Kanako; Shimokubo, Natsumi; Sakagami, Akie; Ueno, Hiroshi; Muramatsu, Yasukazu; Kadosawa, Tsuyoshi; Yanagisawa, Chie; Hanaki, Hideaki; Nakajima, Chie; Suzuki, Yasuhiko; Tamura, Yutaka

2010-08-01

Recently, methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-resistant Staphylococcus pseudintermedius (MRSP) have been increasingly isolated from veterinarians and companion animals. With a view to preventing the spread of MRSA and MRSP, we evaluated the occurrence and molecular characteristics of each in a veterinary college. MRSA and MRSP were isolated from nasal samples from veterinarians, staff members, and veterinary students affiliated with a veterinary hospital. Using stepwise logistic regression, we identified two factors associated with MRSA carriage: (i) contact with an identified animal MRSA case (odds ratio [OR], 6.9; 95% confidence interval [95% CI], 2.2 to 21.6) and (ii) being an employee (OR, 6.2; 95% CI, 2.0 to 19.4). The majority of MRSA isolates obtained from individuals affiliated with the veterinary hospital and dog patients harbored spa type t002 and a type II staphylococcal cassette chromosome mec (SCCmec), similar to the hospital-acquired MRSA isolates in Japan. MRSA isolates harboring spa type t008 and a type IV SCCmec were obtained from one veterinarian on three different sampling occasions and also from dog patients. MRSA carriers can also be a source of MRSA infection in animals. The majority of MRSP isolates (85.2%) carried hybrid SCCmec type II-III, and almost all the remaining MRSP isolates (11.1%) carried SCCmec type V. MRSA and MRSP were also isolated from environmental samples collected from the veterinary hospital (5.1% and 6.4%, respectively). The application of certain disinfection procedures is important for the prevention of nosocomial infection, and MRSA and MRSP infection control strategies should be adopted in veterinary medical practice.

Evaluation of repetitive element polymerase chain reaction for surveillance of methicillin-resistant Staphylococcus aureus at a large academic medical center and community hospitals.

PubMed

Wang, Shu-Hua; Stevenson, Kurt B; Hines, Lisa; Mediavilla, José R; Khan, Yosef; Soni, Ruchi; Dutch, Wendy; Brandt, Eric; Bannerman, Tammy; Kreiswirth, Barry N; Pancholi, Preeti

2015-01-01

Repetitive element polymerase chain reaction (rep-PCR) typing has been used for methicillin-resistant Staphylococcus aureus (MRSA) strain characterization. The goal of this study was to determine if a rapid commercial rep-PCR system, DiversiLab™ (DL; bioMérieux, Durham, NC, USA), could be used for MRSA surveillance at a large medical center and community hospitals. A total of 1286 MRSA isolates genotyped by the DL system were distributed into 84 distinct rep-PCR patterns: 737/1286 (57%) were clustered into 6 major rep-PCR patterns. A subset of 220 isolates was further typed by pulsed-field gel electrophoresis (PFGE), spa typing, and SCCmec typing. The 220 isolates were distributed into 80 rep-PCR patterns, 94 PFGE pulsotypes, 27 spa, and 3 SCCmec types. The DL rep-PCR system is sufficient for surveillance, but the DL system alone cannot be used to compare data to other institutions until a standardized nomenclature is established and the DL MRSA reference library is expanded. Copyright © 2015 Elsevier Inc. All rights reserved.

Fine typing of methicillin-resistant Staphylococcus aureus isolates using direct repeat unit and staphylococcal interspersed repeat unit typing methods.

PubMed

Ho, Cheng-Mao; Ho, Mao-Wang; Li, Chi-Yuan; Lu, Jang-Jih

2015-08-01

Methicillin-resistant Staphylococcus aureus (MRSA) typing is an important epidemiologic tool for monitoring trends and preventing outbreaks. However, the efficiency of various MRSA typing methods for each SCCmec MRSA isolate is rarely evaluated. A total of 157 MRSA isolates from four different regions in Taiwan were typed with five different molecular methods, including SCCmec typing, multilocus sequence typing (MLST), spa typing, mec-associated direct repeat unit (dru) copy number determination, and staphylococcal interspersed repeat unit (SIRU) profiling. There were four SCCmec types, eight MLST types, 15 spa types, 11 dru types, and 31 SIRU profiles. The most common type determined by each molecular typing method was SCCmec III (115 isolates, 73.2%), ST239 (99 isolates, 63.1%), t037 (107 isolates, 68.2%), 14 dru copies (76 isolates, 48.4%), and SIRU profile 3013722 (102 isolates, 65%), respectively. When using the combination of MLST, spa typing, and dru copy number, ST5-t002-4 (n = 8), ST239-t037-14 (n = 68), ST59-t437-9 (n = 9), and ST59-t437-11 (n = 6) were found to be the most common types of SCCmec types II (n = 9), III (n = 115), IV (n = 21), and VT (n = 11) isolates, respectively. SCCmec type III isolates were further classified into 11 dru types. Of the 21 SCCmec type IV isolates, 14 SIRU profiles were found. Seven SIRU patterns were observed in the 11 SCCmec type VT isolates. Different typing methods showed a similar Hunter-Gaston discrimination index among the 157 MRSA isolates. However, dru and SIRU typing methods had a better discriminatory power for SCCmec type III and SCCmec types IV and VT isolates, respectively, suggesting that dru and SIRU can be used to further type these isolates. Copyright © 2013. Published by Elsevier B.V.

Emergence of community-acquired methicillin-resistant Staphylococcus aureus in an Iranian referral paediatric hospital.

PubMed

Mamishi, S; Mahmoudi, S; Bahador, A; Matini, H; Movahedi, Z; Sadeghi, R H; Pourakbari, B

2015-01-01

The epidemiology of methicillin-resistant Staphylococcus aureus (MRSA) in hospitals has been changed in recent years due to the arrival of community-associated MRSA (CA-MRSA) strains into healthcare settings. The aim of this study is to investigate the distribution of staphylococcal cassette chromosome mec (SCCmec) type V as well as SCCmec IV subtypes, which have been associated with community-acquired infection among healthcare-associated MRSA (HA-MRSA) isolates. Antimicrobial susceptibility, SCCmec type, spa type and the presence of Panton-Valentine leukocidin (PVL) genes were determined for all HA-MRSA isolates in an Iranian referral hospital. In this study of 48 HA-MRSA isolates, 13 (27%), three (6.2%), five (10.4%) and one (2%) belonged to SCCmec subtypes IVa, IVb, IVc and IVd, respectively. Only two isolates (4.2%) belonged to SCCmec types V Notably, one isolate was found to harbour concurrent SCCmec subtypes IVb and IVd. MRSA containing SCCmec subtype IVb, IVc and IVd as well as type V isolates were all susceptible to chloramphenicol, clindamycin and rifampicin, while the sensitivity to these antibiotics was lower among MRSA containing SCCmec subtype IVa. The most frequently observed spa ttype was t037, accounting for 88% (22/25). Three other spa type was t002, t1816 and t4478. Large reservoirs of MRSA containing type IV subtypes and type V now exist in patients in this Iranian hospital. Therefore, effective infection control management in order to control the spread of CA-MRSA is highly recommended.

Molecular and phenotypic characteristics of methicillin-resistant Staphylococcus aureus isolated from hospitalized patients.

PubMed

de Oliveira, Caio Ferreira; Morey, Alexandre Tadachi; Santos, Jussevania Pereira; Gomes, Ludmila Vilela Pereira; Cardoso, Juscélio Donizete; Pinge-Filho, Phileno; Perugini, Márcia Regina Eches; Yamauchi, Lucy Megumi; Yamada-Ogatta, Sueli Fumie

2015-07-30

Methicillin-resistant Staphylococcus aureus (MRSA) is one of the leading causes of infections acquired in both community and hospital settings. In this study, MRSA isolated from different sources of hospitalized patients was characterized by molecular and phenotypic methods. A total of 123 S. aureus isolates were characterized according to their genetic relatedness by repetitive element sequence based-PCR (REP-PCR), in vitro antimicrobial susceptibility profile, SCCmec typing and presence of seven virulence factor-encoding genes. REP-PCR fingerprinting showed low relatedness between the isolates, and the predominance of one specific lineage or clonal group was not observed. All isolates were susceptible to teicoplanin and linezolide. All isolates were resistant to cefoxitin and penicillin, and the majority were also resistant to one or more other antimicrobials. Fifty isolates (41.7%) were intermediately resistant to vancomycin. Most isolates harbored SCCmec type II (53.7%), followed by type I (22.8%), type IV (8.1%) and type III (1.6%). All isolates harbored at least two virulence factor-encoding genes, and the prevalence was as follows: coa, 100%; icaA, 100%; hla, 13.0%; hlb, 91.1%, hld, 91.1%; lukS-PV and lukF-PV, 2.4%; and tst, 34.1%. A positive association with the presence of hla and SCCmec type II, and tst and SCCmec type I was observed. This study showed the high virulence potential of multidrug-resistant MRSA circulating in a teaching hospital. A high prevalence of MRSA showing intermediate vancomycin resistance was also observed, indicating the urgent need to improve strategies for controlling the use of antimicrobials for appropriate management of S. aureus infections.

[Differentiation of spa types and staphylococcal cassette chromosome mec (SCCmec) in clinical methicillin-resistant Staphylococcus aureus isolated in medical sites of Gdańsk region].

PubMed

Kasprzyk, Joanna; Piechowicz, Lidia; Wiśniewska, Katarzyna; Dziewit, Łukasz; Bronk, Marek; Świeć, Krystyna

2015-01-01

Methicillin-resistant Staphylococcus aureus bacteria are one of the key etiological factors of hospital-acquired and community-acquired infections. MRSA strains have an ability of causing a broad spectrum infections: from a relatively mild skin infections to severe life-threatening systemic infections. They are characterized by multi-drug resistance, virulence of a number of factors, may clonally spread within the hospitals and between hospitals. The study embraced a number of 75 isolates of MRSA isolated from patients of 7 medical sites of the Gdansk region within the period of six months (June to December 2013). Strains have derived from various clinical materials, both of hospitalized patients (n=59) and outpatient (n=16). The isolates were tested for the susceptibility to antimicrobial agents accordance with the guidelines EUCAST. To estimate of the variability of occurrence of S. aureus clones used were standard spa gene, consisting in the amplified polymorphic region of the X gene encoding the protein A gene (spa). After receiving the results, a spa types were identified using international database Ridom Spa Server (www.spaserver.ridom.de). To determine the polymorphism cassette carrying the inecA gene from MRSA strains, used typing five major chromosomal cassette SCCmec (I-V) by multiplex PCR. MRSA population genetic analysis carried out on the basis of typing SCCmec cassettes and spa gene has showed a predominance of strains with SCCmec type II casette (46.7%) and SCCmec IV casette (38.7%). Less frequently detected were strains containing SCCmec I cassette (12.0%) and SCCmec III cassette (2.6%). Spa typing revealed the presence of 13 gene types in MRSA. The most frequently observed spa types were: t151 (24.0%), t003 (16.0%) in strains of the SCCmec II cassette and t437 (16.0%) and t008 (14.8%) in the isolates with SCCmec cassette IV, whereas staphylococcus with the type of spa t011 (12.0%) had SCCmec cassette I. In our population most frequent strains cassette SCCmec II (46.7%), in most representing types of spa t151 (51.4%) and t003 (34.3%), generally resistant not only to β-lactam antibiotics, but as erythromycin, clindamycin and norfloxacin (82.8%), the more frequently they were isolated from patients than a hospital outpatient centers. The strains SCCmec IV that represent the majority of outpatient centers (68.8%), the most represented type t437 (41.4%) and often occurred in hospital centers.

Mobile genetic element-encoded cytolysin connects virulence to methicillin resistance in MRSA.

PubMed

Queck, Shu Y; Khan, Burhan A; Wang, Rong; Bach, Thanh-Huy L; Kretschmer, Dorothee; Chen, Liang; Kreiswirth, Barry N; Peschel, Andreas; Deleo, Frank R; Otto, Michael

2009-07-01

Bacterial virulence and antibiotic resistance have a significant influence on disease severity and treatment options during bacterial infections. Frequently, the underlying genetic determinants are encoded on mobile genetic elements (MGEs). In the leading human pathogen Staphylococcus aureus, MGEs that contain antibiotic resistance genes commonly do not contain genes for virulence determinants. The phenol-soluble modulins (PSMs) are staphylococcal cytolytic toxins with a crucial role in immune evasion. While all known PSMs are core genome-encoded, we here describe a previously unidentified psm gene, psm-mec, within the staphylococcal methicillin resistance-encoding MGE SCCmec. PSM-mec was strongly expressed in many strains and showed the physico-chemical, pro-inflammatory, and cytolytic characteristics typical of PSMs. Notably, in an S. aureus strain with low production of core genome-encoded PSMs, expression of PSM-mec had a significant impact on immune evasion and disease. In addition to providing high-level resistance to methicillin, acquisition of SCCmec elements encoding PSM-mec by horizontal gene transfer may therefore contribute to staphylococcal virulence by substituting for the lack of expression of core genome-encoded PSMs. Thus, our study reveals a previously unknown role of methicillin resistance clusters in staphylococcal pathogenesis and shows that important virulence and antibiotic resistance determinants may be combined in staphylococcal MGEs.

Distribution of the ACME-arcA gene among methicillin-resistant Staphylococcus aureus from England and Wales.

PubMed

Ellington, Matthew J; Yearwood, Lianne; Ganner, Mark; East, Claire; Kearns, Angela M

2008-01-01

The ST8-SCCmecIVa (USA300) methicillin-resistant Staphylococcus aureus (MRSA) clone can harbour the arginine catabolic mobile element (ACME). The arc gene cluster within the ACME may function as a virulence or strain survival factor. We determined the distribution of the ACME-associated arcA gene among genetically diverse MRSA from around England and Wales. MRSA isolates (n = 203) of diverse genetic types, referred to the England and Wales Staphylococcus reference laboratory, were tested for the presence of the ACME-arcA gene. ACME-arcA-positive isolates were characterized by toxin gene profiling, PFGE and spa sequence typing. MICs of a range of antimicrobials were also determined. The ACME-arcA gene was detected in 17 isolates. Twelve were related to known ST8-MRSA-SCCmecIVa isolates of the USA300 lineage by pulsotype and were resistant to oxacillin, with variable ciprofloxacin and erythromycin resistance. Outside the USA300 lineage, four of the remaining five ACME-arcA isolates were closely related ST97-MRSA-SCCmecV, Panton-Valentine leucocidin (PVL)-negative, resistant to oxacillin and variously resistant to erythromycin, ciprofloxacin, clindamycin, gentamicin, tetracycline and fusidic acid. The remaining isolate was ST1, PVL-positive and resistant to fusidic acid as well as oxacillin. Thirteen out of the 17 isolates were associated with skin and soft tissue infections. The detection of ACME-arcA in diverse MRSA types highlights the mobility of the elements encoding ACME-arcA genes. The diversity of strain types and resistance profiles among ACME-arcA-encoding MRSA is a cause for public-health concern and demands continued surveillance and close monitoring.

Methicillin-resistant Staphylococcus aureus carriage among veterinary staff and dogs in private veterinary clinics in Hokkaido, Japan.

PubMed

Ishihara, Kanako; Saito, Mieko; Shimokubo, Natsumi; Muramatsu, Yasukazu; Maetani, Shigeki; Tamura, Yutaka

2014-03-01

To explore the prevalence and molecular characteristics of methicillin-resistant Staphylococcus aureus (MRSA) in veterinary medical practices, MRSA carriage was tested among 96 veterinarians (Vets), 70 veterinary technicians (VTs) and 292 dogs with which they had contact at 71 private veterinary clinics (VCs) in Hokkaido, Japan. MRSA isolates were obtained from 22 Vets [22.9%] and 7 VTs [10%]. The prevalence of MRSA among Vets was as high as that found in an academic veterinary hospital in our previous study. In contrast, only two blood donor dogs and one dog with liver disease (1.0%, 3/292) yielded MRSA. All MRSA-positive dogs were reared or treated in different VCs, in each of which at least one veterinary staff member carrying MRSA worked. Sequence types (ST) identified by multilocus sequence typing, spa types, and SCCmec types for canine MRSA isolates (ST5-spa t002-SCCmec II [from two dogs] or ST30-spa t021-SCCmec IV [from a dog]) were concordant with those from veterinary staff members in the same clinics as the MRSA-positive dogs, with which they had potentially had contact. Most MRSA isolates from veterinary staff were the same genotype (SCCmec type II and spa type t002) as a major hospital-acquired MRSA clone in Japan. The remaining MRSA was the same genotypes as domestic and foreign community-associated MRSA. Measures against MRSA infection should be provided in private VCs. © 2014 The Societies and Wiley Publishing Asia Pty Ltd.

Predominance of Three Closely Related Methicillin-Resistant Staphylococcus aureus Clones Carrying a Unique ccrC-Positive SCCmec type III and the Emergence of spa t304 and t690 SCCmec type IV pvl+ MRSA Isolates in Kinta Valley, Malaysia.

PubMed

Ho, Wai-Yew; Choo, Quok-Cheong; Chew, Choy-Hoong

2017-03-01

We investigated the epidemiology and clonality of 175 nonrepetitive methicillin-resistant Staphylococcus aureus (MRSA) isolates from clinical specimens collected between 2011 and 2012 in Kinta Valley in Malaysia. Molecular tools such as polymerase chain reaction, pulsed-field gel electrophoresis, and staphylococcal protein A (spa) typing were used. Our study revealed the predominance of three closely related ermA + SCCmec type III pulsotypes belonging to spa type t037 (Brazilian-Hungarian clone), which were deficient in the locus F, but positive for the ccrC gene in majority (65.7%) of the MRSA infections in this region. The first evidence of SCCmec type II MRSA in the country, belonging to spa type t2460, was also noted. Although the carriage of pvl gene was uncommon (8.6%) and mostly confined to either SCCmec type IV or SCCmec type V isolates, most of these isolates belonged to spa types t345 or t657, which are associated with the Bengal-Bay CA-MRSA clone. Interestingly, spa t304 and t690 SCCmec type IV pvl + were also detected among the MRSA isolates. Data from this study show the rise of uncommon clones among MRSA isolates in Malaysia.

Prevalence of methicillin-resistant Staphylococcus aureus (MRSA) infection and the molecular characteristics of MRSA bacteraemia over a two-year period in a tertiary teaching hospital in Malaysia.

PubMed

Sit, Pik San; Teh, Cindy Shuan Ju; Idris, Nuryana; Sam, I-Ching; Syed Omar, Sharifah Faridah; Sulaiman, Helmi; Thong, Kwai Lin; Kamarulzaman, Adeeba; Ponnampalavanar, Sasheela

2017-04-13

Methicillin-resistant Staphylococcus aureus (MRSA) is an established pathogen that causes hospital- and community-acquired infections worldwide. The prevalence rate of MRSA infections were reported to be the highest in Asia. As there is limited epidemiological study being done in Malaysia, this study aimed to determine the prevalence of MRSA infection and the molecular characteristics of MRSA bacteraemia. Two hundred and nine MRSA strains from year 2011 to 2012 were collected from a tertiary teaching hospital in Malaysia. The strains were characterized by antimicrobial susceptibility testing, staphylococcal cassette chromosome mec (SCCmec) typing, detection of Panton-Valentine leukocidin (PVL) gene, multilocus sequence typing (MLST) and pulsed-field gel electrophoresis (PFGE). Patient's demographic and clinical data were collected and correlated with molecular data by statistical analysis. Male gender and patient >50 years of age (p < 0.0001) were significantly associated with the increased risk of MRSA acquisition. Fifty-nine percent of MRSA strains were HA-MRSA that carried SCCmec type II, III, IV and V while 31% were CA-MRSA strains with SCCmec III, IV and V. The prevalence of PVL gene among 2011 MRSA strains was 5.3% and no PVL gene was detected in 2012 MRSA strains. All of the strains were sensitive to vancomycin. However, vancomycin MIC creep phenomenon was demonstrated by the increased number of MRSA strains with MIC ≥1.5 μg/mL (p = 0.008) between 2011 and 2012. Skin disease (p = 0.034) and SCCmec type III (p = 0.0001) were found to be significantly associated with high vancomycin MIC. Forty-four percent of MRSA strains from blood, were further subtyped by MLST and PFGE. Most of the bacteraemia cases were primary bacteraemia and the common comorbidities were diabetes, hypertension and chronic kidney disease. The predominant pulsotype was pulsotype C exhibited by SCCmec III-ST239. This is a first study in Malaysia that reported the occurrence of MRSA clones such as SCCmec V-ST5, untypeable-ST508, SCCmec IV-ST1 and SCCmec IV-ST1137. SCCmec type III remained predominant among the MRSA strains in this hospital. The occurrence of SCCmec IV and V among hospital strains and the presence of SCCmec III in CA-MRSA strains are increasing. MRSA strains causing bacteraemia over the two-year study period were found to be genetically diverse.

Comparison of biofilm formation between major clonal lineages of methicillin resistant Staphylococcus aureus.

PubMed

Vanhommerig, Evelyn; Moons, Pieter; Pirici, Daniel; Lammens, Christine; Hernalsteens, Jean-Pierre; De Greve, Henri; Kumar-Singh, Samir; Goossens, Herman; Malhotra-Kumar, Surbhi

2014-01-01

Epidemic methicillin-resistant S. aureus (MRSA) clones cause infections in both hospital and community settings. As a biofilm phenotype further facilitates evasion of the host immune system and antibiotics, we compared the biofilm-forming capacities of various MRSA clones. Seventy-six MRSA classified into 13 clones (USA300, EMRSA-15, Hungarian/Brazilian etc.), and isolated from infections or from carriers were studied for biofilm formation under static and dynamic conditions. Static biofilms in microtitre plates were quantified colorimetrically. Dynamic biofilms (Bioflux 200, Fluxion, USA) were studied by confocal laser-scanning and time-lapse microscopy, and the total volume occupied by live/dead bacteria quantified by Volocity 5.4.1 (Improvision, UK). MRSA harbouring SCCmec IV produced significantly more biomass under static conditions than SCCmec I-III (P = 0.003), and those harbouring SCCmec II significantly less than those harbouring SCCmec I or III (P<0.001). In the dynamic model, SCCmec I-III harbouring MRSA were significantly better biofilm formers than SCCmec IV (P = 0.036). Only 16 strains successfully formed biofilms under both conditions, of which 13 harboured SCCmec IV and included all tested USA300 strains (n = 3). However, USA300 demonstrated remarkably lower percentages of cell-occupied space (6.6%) compared to the other clones (EMRSA-15 = 19.0%) under dynamic conditions. Time-lapse microscopy of dynamic biofilms demonstrated that USA300 formed long viscoelastic tethers that stretched far from the point of attachment, while EMRSA-15 consisted of micro-colonies attached densely to the surface. MRSA harbouring SCCmec types IV and I-III demonstrate distinct biofilm forming capacities, possibly owing to their adaptation to the community and hospital settings, respectively. USA300 demonstrated abundant biofilm formation under both conditions, which probably confers a competitive advantage, contributing to its remarkable success as a pathogen.

Comparison of spa Types, SCCmec Types and Antimicrobial Resistance Profiles of MRSA Isolated from Turkeys at Farm, Slaughter and from Retail Meat Indicates Transmission along the Production Chain

PubMed Central

Vossenkuhl, Birgit; Brandt, Jörgen; Fetsch, Alexandra; Käsbohrer, Annemarie; Kraushaar, Britta; Alt, Katja; Tenhagen, Bernd-Alois

2014-01-01

The prevalence of MRSA in the turkey meat production chain in Germany was estimated within the national monitoring for zoonotic agents in 2010. In total 22/112 (19.6%) dust samples from turkey farms, 235/359 (65.5%) swabs from turkey carcasses after slaughter and 147/460 (32.0%) turkey meat samples at retail were tested positive for MRSA. The specific distributions of spa types, SCCmec types and antimicrobial resistance profiles of MRSA isolated from these three different origins were compared using chi square statistics and the proportional similarity index (Czekanowski index). No significant differences between spa types, SCCmec types and antimicrobial resistance profiles of MRSA from different steps of the German turkey meat production chain were observed using Chi-Square test statistics. The Czekanowski index which can obtain values between 0 (no similarity) and 1 (perfect agreement) was consistently high (0.79–0.86) for the distribution of spa types and SCCmec types between the different processing stages indicating high degrees of similarity. The comparison of antimicrobial resistance profiles between the different process steps revealed the lowest Czekanowski index values (0.42–0.56). However, the Czekanowski index values were substantially higher than the index when isolates from the turkey meat production chain were compared to isolates from wild boar meat (0.13–0.19), an example of a separated population of MRSA used as control group. This result indicates that the proposed statistical method is valid to detect existing differences in the distribution of the tested characteristics of MRSA. The degree of similarity in the distribution of spa types, SCCmec types and antimicrobial resistance profiles between MRSA isolates from different process stages of turkey meat production may reflect MRSA transmission along the chain. PMID:24788143

Clinical and Microbiological Characteristics of Heteroresistant and Vancomycin-Intermediate Staphylococcus aureus from Bloodstream Infections in a Brazilian Teaching Hospital

PubMed Central

da Costa, Thaina Miranda; Morgado, Priscylla Guimarães Migueres; Cavalcante, Fernanda Sampaio; Damasco, Andreia Paredes; Nouér, Simone Aranha; dos Santos, Kátia Regina Netto

2016-01-01

This study analyzed clinical and microbiological characteristics of heteroresistant (hVISA) and vancomycin-intermediate Staphylococcus aureus (VISA) from bloodstream infections (BSI) in a Brazilian teaching hospital, between 2011 and 2013. Minimum inhibitory concentrations (MIC) of antimicrobials were determined by broth microdilution method and SCCmec was detected by PCR. Isolates with a vancomycin MIC ≥ 2mg/L were cultured on BHI agar with 3, 4 or 6 mg/L (BHIa3, BHIa4 or BHIa6) of vancomycin and BHIa4 with casein (BHIa4ca). Macromethod Etest® and Etest® Glicopeptides Resistance Detection were also used. VISA and hVISA isolates were confirmed by the population analysis profile then typed by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing. Medical data from the patients were obtained from their medical records. Among 110 consecutive isolates, 31 (28%) were MRSA and carried the SCCmec type II (15 isolates) or IV (16 isolates). Vancomycin MIC50 and MIC90 were 1 and 2 mg/L, respectively. MRSA isolates had increased non-susceptibility to daptomycin (p = 0.0003). Six (5%) isolates were VISA, four of which were MRSA, three SCCmec type II/USA100/ST5 and one type IV/USA800/ST3192. One MRSA SCCmec II isolate grew on agar BHIa3, BHIa4 and BHIa4ca, and it was confirmed as hVISA. Among the six VISA isolates, five (83%) grew on BHIa3 and three (50%) on BHI4ca. Four of the six VISA isolates and the one hVISA isolate were from patients who had undergone dialysis. Thus, a possible dissemination of the SCCmec II/USA100/ST5 lineage may have occurred in the hospital comprising the VISA, hVISA and daptomycin non-susceptible S. aureus Brazilian isolates from health care associated bloodstream infections. PMID:27575698

Clinical and Microbiological Characteristics of Heteroresistant and Vancomycin-Intermediate Staphylococcus aureus from Bloodstream Infections in a Brazilian Teaching Hospital.

PubMed

da Costa, Thaina Miranda; Morgado, Priscylla Guimarães Migueres; Cavalcante, Fernanda Sampaio; Damasco, Andreia Paredes; Nouér, Simone Aranha; Dos Santos, Kátia Regina Netto

2016-01-01

This study analyzed clinical and microbiological characteristics of heteroresistant (hVISA) and vancomycin-intermediate Staphylococcus aureus (VISA) from bloodstream infections (BSI) in a Brazilian teaching hospital, between 2011 and 2013. Minimum inhibitory concentrations (MIC) of antimicrobials were determined by broth microdilution method and SCCmec was detected by PCR. Isolates with a vancomycin MIC ≥ 2mg/L were cultured on BHI agar with 3, 4 or 6 mg/L (BHIa3, BHIa4 or BHIa6) of vancomycin and BHIa4 with casein (BHIa4ca). Macromethod Etest® and Etest® Glicopeptides Resistance Detection were also used. VISA and hVISA isolates were confirmed by the population analysis profile then typed by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing. Medical data from the patients were obtained from their medical records. Among 110 consecutive isolates, 31 (28%) were MRSA and carried the SCCmec type II (15 isolates) or IV (16 isolates). Vancomycin MIC50 and MIC90 were 1 and 2 mg/L, respectively. MRSA isolates had increased non-susceptibility to daptomycin (p = 0.0003). Six (5%) isolates were VISA, four of which were MRSA, three SCCmec type II/USA100/ST5 and one type IV/USA800/ST3192. One MRSA SCCmec II isolate grew on agar BHIa3, BHIa4 and BHIa4ca, and it was confirmed as hVISA. Among the six VISA isolates, five (83%) grew on BHIa3 and three (50%) on BHI4ca. Four of the six VISA isolates and the one hVISA isolate were from patients who had undergone dialysis. Thus, a possible dissemination of the SCCmec II/USA100/ST5 lineage may have occurred in the hospital comprising the VISA, hVISA and daptomycin non-susceptible S. aureus Brazilian isolates from health care associated bloodstream infections.

Determining the prevalence of SCCmec polymorphism, virulence and antibiotic resistance genes among methicillin-resistant Staphylococcus aureus (MRSA) isolates collected from selected hospitals in west of Iran.

PubMed

Taherikalani, Morovat; Mohammadzad, Mohammad Reza; Soroush, Setareh; Maleki, Mohammad Hossein; Azizi-Jalilian, Farid; Pakzad, Iraj; Sadeghifard, Nourkhoda; Asadollahi, Parisa; Emaneini, Mohammad; Monjezi, Aazam; Alikhani, Mohammad Yousef

2016-04-01

Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most important pathogens worldwide and compared to other staphylococcal species that are associated with higher mortality rate. A total of 500 Staphylococcus spp. was collected from selected hospitals in Ilam, Kermanshah, Khorram Abad and Hamadan cities and, via phenotypic and genotypic methods, was assessed to find MRSA. The presence or absence of prevalent antibiotic resistance genes and virulence genes was evaluated among MRSA isolates, using polymerase chain reaction (PCR) method, and then the SCCmec typing of these isolates was assayed by multiplex PCR. A total of 372 (74.4%) Stapylococcus spp. isolates were identified as S. aureus, among which 200 (53.8%) possessed the mecA gene and were distinguished as MRSA. All of MRSA isolates contained blaZ gene. The frequency of ermA and ermC genes among erythromycin-resistant MRSA isolates was 21.6% and 66.7%, respectively. The frequency of the virulence genes eta, hla and sea among MRSA isolates was 10%, 80.5% and 100%, respectively. SCCmec type IV accounted for 30.6% of the MRSA isolates and SCCmec type III, SCCmec type II and SCCmec type I accounted for 30%, 22% and 17.5% of the isolates, respectively. The antibiotic resistance genes and the virulence genes of blaZ, hla, sea, eta and ermC had high frequencies among the MRSA isolates. This study showed that the antibiotic resistance genes had higher frequencies among SCCmec types I and IV, which confirms the previous reports in this field.

Trend in vancomycin susceptibility and correlation with molecular characteristics of methicillin-resistant Staphylococcus aureus causing invasive infections in Taiwan: results from the Tigecycline in vitro Surveillance in Taiwan (TIST) study, 2006-2010.

PubMed

Tsao, Shin-Ming; Wang, Wei-Yao; Ko, Wen-Chien; Huang, Cheng-Hua; Lu, Chin-Te; Chuang, Yin-Ching; Liu, Chia-Ying; Liao, Chun-Hsing; Chen, Yao-Shen; Liu, Yung-Ching; Chen, Wei-Yu; Jang, Tsrang-Neng; Lin, Hsiu-Chen; Chen, Chih-Ming; Shi, Zhi-Yuan; Pan, Sung-Ching; Yang, Jia-Ling; Kung, Hsiang-Chi; Liu, Chun-Eng; Cheng, Yu-Jen; Liu, Jien-Wei; Sun, Wu; Wang, Lih-Shinn; Yu, Kwok-Woon; Chiang, Ping-Cherng; Lee, Ming-Hsun; Lee, Chun-Ming; Hsu, Gwo-Jong; Chen, Yen-Hsu; Lu, Po-Liang; Thomas, Chang-Yao Tsao; Hsueh, Po-Ren

2014-10-01

This study was intended to investigate the trend in vancomycin susceptibility and correlation with molecular characteristics of methicillin-resistant Staphylococcus aureus (MRSA) causing invasive infections. A total of 670 MRSA isolates were collected from patients with invasive infections as part of bacterial collection in the Tigecycline in vitro Surveillance in Taiwan (TIST) from 2006 to 2010. MICs of the isolates to vancomycin were determined using the agar dilution method. Characteristics of staphylococcal cassette chromosome mec (SCCmec), mec-associated hypervariable region (dru), and accessory gene regulator (agr) of the isolates were identified by polymerase chain reaction methods. MRSA isolates with SCCmec types I, II, and III were molecularly defined as hospital-associated MRSA (HA-MRSA), and those with SCCmec types IV, V, and VT were assigned as community-associated MRSA (CA-MRSA). All but 1 MRSA isolates exhibited vancomycin MICs ≤1 mg/L. A declining trend in vancomycin MICs among MRSA isolates was noted, which was associated with the decline in proportion of HA-MRSA. The percentage of CA-MRSA increased from 25.6% in 2006 to 46.0% in 2010. An increase in the geometric mean of vancomycin MICs was found in MRSA with particular molecular types such as SCCmec types II and III, agr groups I and II, and dru10-14. A significant correlation among particular molecular types was found, including SCCmecII-agr group II-dru4, SCCmecIII-agr group I-dru11-14, SCCmecIV-agr group II-dru9, and SCCmecVT-agr group I-dru9 and dru11. There was no vancomycin creep among MRSA isolates, and the declining trend of vancomycin MIC against MRSA was attributed to the increasing prevalence of CA-MRSA over time. Copyright © 2014 Elsevier Inc. All rights reserved.

Whole-genome comparison of meticillin-resistant Staphylococcus aureus CC22 SCCmecIV from people and their in-contact pets.

PubMed

Loeffler, Anette; McCarthy, Alex; Lloyd, David H; Musilová, Eva; Pfeiffer, Dirk U; Lindsay, Jodi A

2013-10-01

Meticillin-resistant Staphylococcus aureus (MRSA) infections remain important medical and veterinary challenges. The MRSA isolated from dogs and cats typically belong to dominant hospital-associated clones, in the UK mostly EMRSA-15 (CC22 SCCmecIV), suggesting original human-to-animal transmission. Nevertheless, little is known about host-specific genetic variation within the same S. aureus lineage. To identify host-specific variation amongst MRSA CC22 SCCmecIV by comparing isolates from pets with those from in-contact humans using whole-genome microarray. Six pairs of MRSA CC22 SCCmecIV from human carriers (owners and veterinary staff) and their respective infected in-contact pets were compared using a 62-strain whole-genome S. aureus microarray (SAM-62). The presence of putative host-specific genes was subsequently determined in a larger number of human (n = 47) and pet isolates (n = 93) by PCR screening. Variation in mobile genetic elements (MGEs) occurred frequently and appeared largely independent of host and in-contact pair. A plasmid (SAP078A) encoding heavy-metal resistance genes (arsR, arsA, cadA, cadC, mco and copB) was found in three of six human and none of six animal isolates. However, only two of four resistance genes were associated with human hosts (P = 0.015 for arsA and cadA). The variation found amongst MGEs highlights that genetic adaptation in MRSA continues. However, host-specific MGEs were not detected, which supports the hypothesis that pets may not be natural hosts of MRSA CC22 and emphasizes that rigorous hygiene measures are critical to prevent contamination and infection of dogs and cats. The host specificity of individual heavy-metal resistance genes warrants further investigation into different selection pressures in humans and animals. © 2013 ESVD and ACVD.

Characterization of Livestock-Associated Methicillin-Resistant Staphylococcus aureus CC398 and mecC-positive CC130 from Zoo Animals in the United Kingdom.

PubMed

Bortolami, Alessio; Verin, Ranieri; Chantrey, Julian; Corrò, Michela; Ashpole, Ian; Lopez, Javier; Timofte, Dorina

2017-10-01

Little is known about the characteristics and diseases associated with methicillin-resistant Staphylococcus aureus (MRSA) in nondomestic animals. Four presumptive MRSA isolates, obtained from clinical (n = 3) and surveillance specimens (n = 1) from dwarf (Helogale parvula) and yellow mongooses (Cynictis penicillata) from a United Kingdom zoo, were analyzed by PCR for detection of mecA and mecC-mediated methicillin resistance, and virulence genes. Isolates were genotyped by multilocus sequence typing (MLST) and staphylococcal cassette chromosome mec (SCCmec) and spa sequence typing. Three isolates, obtained from the dwarf mongooses, carried mecA, tetK, and fexA resistance and virulence genes (icaA, icaD, and sec) and were typed to SCCmec IVa, spa type t899, and clonal complex (CC) 398. The fourth MRSA isolate, obtained from the femoral bone marrow of a yellow mongoose showing postmortem findings consistent with septicemia, carried mecC and was oxacillin/cefoxitin susceptible, when tested at 37°C but showed a characteristic MRSA susceptibility profile at 25°C ± 2°C. Furthermore, this isolate exhibited a different genetic background (SCCmecXI/t843/CC130) and had biofilm-associated genes (bap, icaA, and icaD) and tetK tetracycline resistance genes. This work describes the first isolation of livestock-associated MRSA CC398 from two zoo mongoose species where it was associated with both clinical disease and colonization, and the first isolation of mecC MRSA from a zoo species in the United Kingdom. Both reports highlight the potential for zoo species to act as reservoirs for these zoonotic agents.

Detection of mecC-Positive Staphylococcus aureus (CC130-MRSA-XI) in Diseased European Hedgehogs (Erinaceus europaeus) in Sweden

PubMed Central

Monecke, Stefan; Gavier-Widen, Dolores; Mattsson, Roland; Rangstrup-Christensen, Lena; Lazaris, Alexandros; Coleman, David C.; Shore, Anna C.; Ehricht, Ralf

2013-01-01

Recently, a novel mec gene conferring beta-lactam resistance in Staphylococcus aureus has been discovered. This gene, mecC, is situated on a SCCmec XI element that has to date been identified in clonal complexes 49, 130, 425, 599 and 1943. Some of the currently known isolates have been identified from animals. This, and observations of mecA alleles that do not confer beta-lactam resistance, indicate that mec genes might have a reservoir in Staphylococcus species from animals. Thus it is important also to screen wildlife isolates for mec genes. Here, we describe mecC-positive Staphylococcus aureus (ST130-MRSA-XI) and the lesions related to the infection in two diseased free-ranging European hedgehogs (Erinaceus europaeus). One was found dead in 2003 in central Sweden, and suffered from S. aureus septicaemia. The other one, found on the island of Gotland in the Baltic Sea in 2011, showed a severe dermatitis and was euthanised. ST130-MRSA-XI isolates were isolated from lesions from both hedgehogs and were essentially identical to previously described isolates from humans. Both isolates carried the complete SCCmec XI element. They lacked the lukF-PV/lukS-PV and lukM/lukF-P83 genes, but harboured a gene for an exfoliative toxin homologue previously described from Staphylococcus hyicus, Staphylococcus pseudintermedius and other S. aureus of the CC130 lineage. To the best of our knowledge, these are the first reported cases of CC130-MRSA-XI in hedgehogs. Given that one of the samples was taken as early as 2003, this was the earliest detection of this strain and of mecC in Sweden. This and several other recent observations suggest that CC130 might be a zoonotic lineage of S. aureus and that SCCmec XI/mecC may have originated from animal pathogens. PMID:23776626

Detection of mecC-positive Staphylococcus aureus (CC130-MRSA-XI) in diseased European hedgehogs (Erinaceus europaeus) in Sweden.

PubMed

Monecke, Stefan; Gavier-Widen, Dolores; Mattsson, Roland; Rangstrup-Christensen, Lena; Lazaris, Alexandros; Coleman, David C; Shore, Anna C; Ehricht, Ralf

2013-01-01

Recently, a novel mec gene conferring beta-lactam resistance in Staphylococcus aureus has been discovered. This gene, mecC, is situated on a SCCmec XI element that has to date been identified in clonal complexes 49, 130, 425, 599 and 1943. Some of the currently known isolates have been identified from animals. This, and observations of mecA alleles that do not confer beta-lactam resistance, indicate that mec genes might have a reservoir in Staphylococcus species from animals. Thus it is important also to screen wildlife isolates for mec genes. Here, we describe mecC-positive Staphylococcus aureus (ST130-MRSA-XI) and the lesions related to the infection in two diseased free-ranging European hedgehogs (Erinaceus europaeus). One was found dead in 2003 in central Sweden, and suffered from S. aureus septicaemia. The other one, found on the island of Gotland in the Baltic Sea in 2011, showed a severe dermatitis and was euthanised. ST130-MRSA-XI isolates were isolated from lesions from both hedgehogs and were essentially identical to previously described isolates from humans. Both isolates carried the complete SCCmec XI element. They lacked the lukF-PV/lukS-PV and lukM/lukF-P83 genes, but harboured a gene for an exfoliative toxin homologue previously described from Staphylococcus hyicus, Staphylococcus pseudintermedius and other S. aureus of the CC130 lineage. To the best of our knowledge, these are the first reported cases of CC130-MRSA-XI in hedgehogs. Given that one of the samples was taken as early as 2003, this was the earliest detection of this strain and of mecC in Sweden. This and several other recent observations suggest that CC130 might be a zoonotic lineage of S. aureus and that SCCmec XI/mecC may have originated from animal pathogens.

Distribution and regulation of the mobile genetic element-encoded phenol-soluble modulin PSM-mec in methicillin-resistant Staphylococcus aureus.

PubMed

Chatterjee, Som S; Chen, Liang; Joo, Hwang-Soo; Cheung, Gordon Y C; Kreiswirth, Barry N; Otto, Michael

2011-01-01

The phenol-soluble modulin PSM-mec is the only known staphylococcal toxin that is encoded on a mobile antibiotic resistance determinant, namely the staphylococcal cassette chromosome (SCC) element mec encoding resistance to methicillin. Here we show that the psm-mec gene is found frequently among methicillin-resistant Staphylococcus aureus (MRSA) strains of SCCmec types II, III, and VIII, and is a conserved part of the class A mec gene complex. Controlled expression of AgrA versus RNAIII in agr mutants of all 3 psm-mec-positive SCCmec types demonstrated that expression of psm-mec, which is highly variable, is controlled by AgrA in an RNAIII-independent manner. Furthermore, psm-mec isogenic deletion mutants showed only minor changes in PSMα peptide production and unchanged (or, as previously described, diminished) virulence compared to the corresponding wild-type strains in a mouse model of skin infection. This indicates that the recently reported regulatory impact of the psm-mec locus on MRSA virulence, which is opposite to that of the PSM-mec peptide and likely mediated by a regulatory RNA, is minor when analyzed in the original strain background. Our study gives new insight in the distribution, regulation, and role in virulence of the PSM-mec peptide and the psm-mec gene locus.

Evaluation of antimicrobial susceptibilities and virulence factors of Staphylococcus aureus strains isolated from community-acquired and health-care associated pediatric infections.

PubMed

Karbuz, Adem; Karahan, Zeynep Ceren; Aldemir-Kocabaş, Bilge; Tekeli, Alper; Özdemir, Halil; Güriz, Haluk; Gökdemir, Refik; İnce, Erdal; Çiftçi, Ergin

2017-01-01

Karbuz A, Karahan ZC, Aldemir-Kocabaş B, Tekeli A, Özdemir H, Güriz H, Gökdemir R, İnce E, Çiftçi E. Evaluation of antimicrobial susceptibilities and virulence factors of Staphylococcus aureus strains isolated from community-acquired and health-care associated pediatric infections. Turk J Pediatr 2017; 59: 395-403. The aim of this study was to investigate the enterotoxins and Panton-Valentine leukocidin (PVL) gene as virulence factor, identification if antimicrobial sensitivity patterns, agr (accessory gene regulator) types and sequence types and in resistant cases to obtain SCCmec (staphylococcal cassette chromosome mec) gene types which will be helpful to decide empirical therapy and future health politics for S. aureus species. Total of 150 isolates of S. aureus were isolated from the cultures of the child patients in January 2011 and December 2012. In this study, the penicillin resistance was observed as 93.8%. PVL and mecA was detected positive in 8.7% and in 6% of all S. aureus strains, respectively. Two MRSA (methicillin resistant S.aureus) strains were detected as SCCmec type III and SCCmec type V and five MRSA strains were detected as SCCmec type IV. SET-I and SET-G were the most common detected enterotoxins. In both community-associated and healthcare-associated MRSA strains, agr type 1 was detected most commonly. The most common sequence types were ST737 in 13 patients than ST22 in eight patients and ST121 in six patients. This study highlights a necessity to review the cause of small changes in the structural genes in order to determine whether it is a cause or outcome; community-acquired and healthcare associated strains overlap.

A Field Guide to Pandemic, Epidemic and Sporadic Clones of Methicillin-Resistant Staphylococcus aureus

PubMed Central

Monecke, Stefan; Coombs, Geoffrey; Shore, Anna C.; Coleman, David C.; Akpaka, Patrick; Borg, Michael; Chow, Henry; Ip, Margaret; Jatzwauk, Lutz; Jonas, Daniel; Kadlec, Kristina; Kearns, Angela; Laurent, Frederic; O'Brien, Frances G.; Pearson, Julie; Ruppelt, Antje; Schwarz, Stefan; Scicluna, Elizabeth; Slickers, Peter; Tan, Hui-Leen; Weber, Stefan; Ehricht, Ralf

2011-01-01

In recent years, methicillin-resistant Staphylococcus aureus (MRSA) have become a truly global challenge. In addition to the long-known healthcare-associated clones, novel strains have also emerged outside of the hospital settings, in the community as well as in livestock. The emergence and spread of virulent clones expressing Panton-Valentine leukocidin (PVL) is an additional cause for concern. In order to provide an overview of pandemic, epidemic and sporadic strains, more than 3,000 clinical and veterinary isolates of MRSA mainly from Germany, the United Kingdom, Ireland, France, Malta, Abu Dhabi, Hong Kong, Australia, Trinidad & Tobago as well as some reference strains from the United States have been genotyped by DNA microarray analysis. This technique allowed the assignment of the MRSA isolates to 34 distinct lineages which can be clearly defined based on non-mobile genes. The results were in accordance with data from multilocus sequence typing. More than 100 different strains were distinguished based on affiliation to these lineages, SCCmec type and the presence or absence of PVL. These strains are described here mainly with regard to clinically relevant antimicrobial resistance- and virulence-associated markers, but also in relation to epidemiology and geographic distribution. The findings of the study show a high level of biodiversity among MRSA, especially among strains harbouring SCCmec IV and V elements. The data also indicate a high rate of genetic recombination in MRSA involving SCC elements, bacteriophages or other mobile genetic elements and large-scale chromosomal replacements. PMID:21494333

Complete Genome Sequence of Staphylococcus aureus XN108, an ST239-MRSA-SCCmec III Strain with Intermediate Vancomycin Resistance Isolated in Mainland China

PubMed Central

Zhang, Xia; Xu, Xiaomeng; Yuan, Wenchang; Hu, Qiwen; Shang, Weilong; Hu, Xiaomei

2014-01-01

ST239-MRSA-SCCmec III (ST239, sequence type 239; MRSA, methicillin-resistant Staphylococcus aureus; SCCmec III, staphylococcal cassette chromosome mec type III) is the most predominant clone of hospital-acquired methicillin-resistant S. aureus in mainland China. We report here the complete genome sequence of XN108, the first vancomycin-intermediate S. aureus strain isolated from a steam-burned patient with a wound infection. PMID:25059856

The association between Staphylococcus aureus nasal colonization and symptomatic infection in children in Korea where ST72 is the major genotype: A prospective observational study.

PubMed

Kang, Sunghan; Lee, Jina; Kim, Mina

2017-08-01

This study was performed to investigate the concordance in terms of molecular characteristics and antimicrobial susceptibility between colonizing and clinical Staphylococcus aureus isolates obtained from children in Korea, where ST72 is the major genotype.This was a prospective observational descriptive study of culture-confirmed S aureus infections obtained from children ≤18 years old admitted to Asan Medical Center Children's Hospital in Seoul, Korea, from March 2014 to April 2015. Molecular studies including multilocus sequence typing (MLST), SCCmec typing, polymerase chain reaction amplification of the Panton-Valentine leukocidin (PVL) genes, and antibiotic susceptibility tests were performed on S aureus isolates obtained from nares and clinical specimens.During the study period, 126 clinically significant S aureus infections were identified. Nasal swab cultures were made from 113 of the 126 children, and 46.0% (52/113) showed S aureus colonization. The overall concordance between colonizing and clinical isolates by methicillin susceptibility was 94.2% (49/52); all 3 discordant cases were HA-MSSA cases with nasal MRSA. Among the 37 pairs of colonizing and clinical S aureus isolates included in the genotyping analysis, ST72-SCCmec type IV was the most prevalent clone and the PVL genes were positive in 2 patients. Among the 31 pairs of healthcare-associated cases, concordance rates by methicillin susceptibility and sequence type (ST) were 90.3% (28/31) and 84% (26/31), respectively. For the 6 pairs of community-associated (CA) S aureus including 3 CA-MRSA cases, 100% concordance was observed by methicillin susceptibility and ST.The concordance between isolates obtained from children who required medical services was relatively high in Korean children where ST72-SCCmec type IV is the predominant clone as the colonizer and the pathogen. It is suggested that decolonization and continuous care to prevent transmission could be effective in managing and preventing both HA- and CA-SA infections in our setting.

Characterization of a complex context containing mecA but lacking genes encoding cassette chromosome recombinases in Staphylococcus haemolyticus

PubMed Central

2013-01-01

Background Methicillin resistance determinant mecA is generally transferred by SCCmec elements. However, the mecA gene might not be carried by a SCCmec in a Staphylococcus haemolyticus clinical isolate, WCH1, as no cassette chromosome recombinase genes were detected. Therefore, the genetic context of mecA in WCH1 was investigated. Results A 40-kb region containing mecA was obtained from WCH1, bounded by orfX at one end and several orfs of S. haemolyticus core chromosome at the other. This 40-kb region was very complex in structure with multiple genetic components that appeared to have different origins. For instance, the 3.7-kb structure adjacent to orfX was almost identical to that on the chromosome of Staphylococcus epidermidis RP62a but was absent from S. haemolyticus JCSC1435. Terminal inverted repeats of SCC were found but no ccr genes could be detected. mecA was bracketed by two copies of IS431, which was flanked by 8-bp direct target repeat sequence (DR). Conclusions The presence of 8-bp DR suggests that the two copies of IS431 might have formed a composite transposon for mobilizing mecA. This finding is of significance as multiple copies of IS431 are commonly present in the contexts of mecA, which might have the potential to form various composite transposons that could mediate the mobilization of mecA. This study also provides an explanation for the absence of ccr in some staphylococci isolates carrying mecA. PMID:23521926

Characterization of a complex context containing mecA but lacking genes encoding cassette chromosome recombinases in Staphylococcus haemolyticus.

PubMed

Zong, Zhiyong

2013-03-22

Methicillin resistance determinant mecA is generally transferred by SCCmec elements. However, the mecA gene might not be carried by a SCCmec in a Staphylococcus haemolyticus clinical isolate, WCH1, as no cassette chromosome recombinase genes were detected. Therefore, the genetic context of mecA in WCH1 was investigated. A 40-kb region containing mecA was obtained from WCH1, bounded by orfX at one end and several orfs of S. haemolyticus core chromosome at the other. This 40-kb region was very complex in structure with multiple genetic components that appeared to have different origins. For instance, the 3.7-kb structure adjacent to orfX was almost identical to that on the chromosome of Staphylococcus epidermidis RP62a but was absent from S. haemolyticus JCSC1435. Terminal inverted repeats of SCC were found but no ccr genes could be detected. mecA was bracketed by two copies of IS431, which was flanked by 8-bp direct target repeat sequence (DR). The presence of 8-bp DR suggests that the two copies of IS431 might have formed a composite transposon for mobilizing mecA. This finding is of significance as multiple copies of IS431 are commonly present in the contexts of mecA, which might have the potential to form various composite transposons that could mediate the mobilization of mecA. This study also provides an explanation for the absence of ccr in some staphylococci isolates carrying mecA.

Diversity of staphylococcal cassette chromosome mec structures in methicillin-resistant Staphylococcus epidermidis and Staphylococcus haemolyticus strains among outpatients from four countries.

PubMed

Ruppé, Etienne; Barbier, François; Mesli, Yasmine; Maiga, Aminata; Cojocaru, Radu; Benkhalfat, Mokhtar; Benchouk, Samia; Hassaine, Hafida; Maiga, Ibrahim; Diallo, Amadou; Koumaré, Abdel Karim; Ouattara, Kalilou; Soumaré, Sambou; Dufourcq, Jean-Baptiste; Nareth, Chhor; Sarthou, Jean-Louis; Andremont, Antoine; Ruimy, Raymond

2009-02-01

In staphylococci, methicillin (meticillin) resistance (MR) is mediated by the acquisition of the mecA gene, which is carried on the size and composition variable staphylococcal cassette chromosome mec (SCCmec). MR has been extensively studied in Staphylococcus aureus, but little is known about MR coagulase-negative staphylococci (MR-CoNS). Here, we describe the diversity of SCCmec structures in MR-CoNS from outpatients living in countries with contrasting environments: Algeria, Mali, Moldova, and Cambodia. Their MR-CoNS nasal carriage rates were 29, 17, 11, and 31%, respectively. Ninety-six MR-CoNS strains, comprising 75 (78%) Staphylococcus epidermidis strains, 19 (20%) Staphylococcus haemolyticus strains, 1 (1%) Staphylococcus hominis strain, and 1 (1%) Staphylococcus cohnii strain, were analyzed. Eighteen different SCCmec types were observed, with 28 identified as type IV (29%), 25 as type V (26%), and 1 as type III (1%). Fifteen strains (44%) were untypeable for their SCCmec. Thirty-four percent of MR-CoNS strains contained multiple ccr copies. Type IV and V SCCmec were preferentially associated with S. epidermidis and S. haemolyticus, respectively. MR-CoNS constitute a widespread and highly diversified MR reservoir in the community.

Complete Circular Genome Sequence of Successful ST8/SCCmecIV Community-Associated Methicillin-Resistant Staphylococcus aureus (OC8) in Russia: One-Megabase Genomic Inversion, IS256’s Spread, and Evolution of Russia ST8-IV

PubMed Central

Wan, Tsai-Wen; Higuchi, Wataru; Hung, Wei-Chun; Reva, Ivan V.; Singur, Olga A.; Gostev, Vladimir V.; Sidorenko, Sergey V.; Peryanova, Olga V.; Salmina, Alla B.; Reva, Galina V.; Teng, Lee-Jene; Yamamoto, Tatsuo

2016-01-01

ST8/SCCmecIV community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) has been a common threat, with large USA300 epidemics in the United States. The global geographical structure of ST8/SCCmecIV has not yet been fully elucidated. We herein determined the complete circular genome sequence of ST8/SCCmecIVc strain OC8 from Siberian Russia. We found that 36.0% of the genome was inverted relative to USA300. Two IS256, oppositely oriented, at IS256-enriched hot spots were implicated with the one-megabase genomic inversion (MbIN) and vSaβ split. The behavior of IS256 was flexible: its insertion site (att) sequences on the genome and junction sequences of extrachromosomal circular DNA were all divergent, albeit with fixed sizes. A similar multi-IS256 system was detected, even in prevalent ST239 healthcare-associated MRSA in Russia, suggesting IS256’s strong transmission potential and advantage in evolution. Regarding epidemiology, all ST8/SCCmecIVc strains from European, Siberian, and Far Eastern Russia, examined had MbIN, and geographical expansion accompanied divergent spa types and resistance to fluoroquinolones, chloramphenicol, and often rifampicin. Russia ST8/SCCmecIVc has been associated with life-threatening infections such as pneumonia and sepsis in both community and hospital settings. Regarding virulence, the OC8 genome carried a series of toxin and immune evasion genes, a truncated giant surface protein gene, and IS256 insertion adjacent to a pan-regulatory gene. These results suggest that unique single ST8/spa1(t008)/SCCmecIVc CA-MRSA (clade, Russia ST8-IVc) emerged in Russia, and this was followed by large geographical expansion, with MbIN as an epidemiological marker, and fluoroquinolone resistance, multiple virulence factors, and possibly a multi-IS256 system as selective advantages. PMID:27741255

Complete Circular Genome Sequence of Successful ST8/SCCmecIV Community-Associated Methicillin-Resistant Staphylococcus aureus (OC8) in Russia: One-Megabase Genomic Inversion, IS256's Spread, and Evolution of Russia ST8-IV.

PubMed

Wan, Tsai-Wen; Khokhlova, Olga E; Iwao, Yasuhisa; Higuchi, Wataru; Hung, Wei-Chun; Reva, Ivan V; Singur, Olga A; Gostev, Vladimir V; Sidorenko, Sergey V; Peryanova, Olga V; Salmina, Alla B; Reva, Galina V; Teng, Lee-Jene; Yamamoto, Tatsuo

2016-01-01

ST8/SCCmecIV community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) has been a common threat, with large USA300 epidemics in the United States. The global geographical structure of ST8/SCCmecIV has not yet been fully elucidated. We herein determined the complete circular genome sequence of ST8/SCCmecIVc strain OC8 from Siberian Russia. We found that 36.0% of the genome was inverted relative to USA300. Two IS256, oppositely oriented, at IS256-enriched hot spots were implicated with the one-megabase genomic inversion (MbIN) and vSaβ split. The behavior of IS256 was flexible: its insertion site (att) sequences on the genome and junction sequences of extrachromosomal circular DNA were all divergent, albeit with fixed sizes. A similar multi-IS256 system was detected, even in prevalent ST239 healthcare-associated MRSA in Russia, suggesting IS256's strong transmission potential and advantage in evolution. Regarding epidemiology, all ST8/SCCmecIVc strains from European, Siberian, and Far Eastern Russia, examined had MbIN, and geographical expansion accompanied divergent spa types and resistance to fluoroquinolones, chloramphenicol, and often rifampicin. Russia ST8/SCCmecIVc has been associated with life-threatening infections such as pneumonia and sepsis in both community and hospital settings. Regarding virulence, the OC8 genome carried a series of toxin and immune evasion genes, a truncated giant surface protein gene, and IS256 insertion adjacent to a pan-regulatory gene. These results suggest that unique single ST8/spa1(t008)/SCCmecIVc CA-MRSA (clade, Russia ST8-IVc) emerged in Russia, and this was followed by large geographical expansion, with MbIN as an epidemiological marker, and fluoroquinolone resistance, multiple virulence factors, and possibly a multi-IS256 system as selective advantages.

Identification of Major Sequence Types among Multidrug-Resistant Staphylococcus epidermidis Strains Isolated from Infected Eyes and Healthy Conjunctiva

PubMed Central

Jena, Smrutiti; Panda, Sasmita; Nayak, Kinshuk C.; Singh, Durg V.

2017-01-01

We examined the presence of virulence and antibiotic resistance genes, SCCmec types and determined the genomic diversity among ocular S. epidermidis isolates (patients-23, healthy controls-29). PCR determined the presence of antibiotic resistance genes, virulence genes and SCCmec types among all isolates. MLST and PFGE determined the genomic relatedness among them. All isolates of S. epidermidis showed resistance to at least one class of antibiotics of which 48 isolates were multidrug resistant and carried ARGs. Thirty-five isolates were methicillin resistant and carried mecA gene. Majority of the isolates were resistant to fluoroquinolones and showed mutation in gyrA, parC, and parE genes, however, few isolates showed additional novel mutations in parC gene. Of the MRSE strains, 17 strains carried SCCmec type IV, four type V, two type II, and two UT4. Seven strains carried novel combination of ccr complex and SCCmercury element, not reported earlier. All the S. epidermidis strains harbored icaA and icaD genes, 47 carried ACME operon, and 50 contained IS256. A noteworthy finding was the presence of ST179 among 43% of infected eye isolates an observation rarely reported among S. epidermidis. PFGE and MLST analysis showed genomic diversity among them. Statistical analysis suggests that few healthy conjunctiva isolates had characteristics similar to infected eye isolates. S. epidermidis strains carrying mecA gene are multidrug resistant, virulent and diverse irrespective of sources of isolation. IS256 cannot be used as marker to differentiate isolates of infected eye from healthy conjunctiva. PMID:28824564

Genetic and phenotypic characterization of methicillin-resistant staphylococci isolated from veterinary hospitals in South Korea.

PubMed

Moon, Bo Youn; Youn, Jung-Ho; Shin, Sook; Hwang, Sun Young; Park, Yong Ho

2012-05-01

Staphylococci were isolated from veterinary staff, hospitalized animals, and medical equipment from 2 major tertiary veterinary hospitals in South Korea to investigate antimicrobial resistance and genetic relatedness. The detection rate for staphylococci was 55.2% (111/201 samples), and 11 species were identified among the collected staphylococcal strains. The most prevalent species were Staphylococcus pseudintermedius (52/111, 46.8%), Staphylococcus epidermidis (21/111, 18.9%), and Staphylococcus aureus (19/111, 17.1%). The methicillin-resistance rates of staphylococci isolated from veterinary staff and medical equipment were higher than those from hospitalized animals. The genotype of methicillin-resistant S. aureus (MRSA) strains in the current study was sequence type (ST)72-SCCmec IVc-t324, which is similar to the genotype of prevalent MRSA strains in human beings and food animals in South Korea. Among the mecA-positive S. pseudintermedius isolates, SCCmec V was most prevalent in strains originating from both veterinary staff and hospitalized animals. SCCmec IVa was detected in methicillin-resistant S. epidermidis, whereas SCCmec IVc was found in other methicillin-resistant, coagulase-negative staphylococci. The SCCmec typing, antimicrobial susceptibility tests, and pulsed field gel electrophoresis results showed that methicillin-resistant staphylococci dissemination between hospitalized animals and veterinary staff is possible in South Korean veterinary hospitals.

Distribution and characterization of methicillin-resistant Staphylococcus aureus (MRSA) at the small animal hospital, faculty of veterinary medicine, Chiang Mai University, Thailand.

PubMed

Patchanee, Prapas; Tadee, Pakpoom; Ingkaninan, Pimlada; Tankaew, Pallop; Hoet, Armando E; Chupia, Vena

2014-03-01

Of 416 samples taken from veterinary staff (n = 30), dogs (n = 356) and various environmental sites (n = 30) at the Small Animal Hospital, Faculty of Veterinary Medicine, Chiang Mai University, Thailand, 13 samples contained methicillin-resistant Staphylococcus aureus (MRSA), of which 1 (SCCmec type II) came from veterinarian, 9 (SCCmec types I, III, IVa, V and untypeable) from dogs, and 3 (SCCmec types I, III, and IVb) from environmental samples. The MRSA isolates were 100% susceptible to vancomycin (100%), 69% to cephazolin and 62% to gentamicin, but were up to 92% resistant to tetracycline group, 69% to trimethoprim-sulfamethoxazoles and 62% to ceftriaxone. In addition, all MRSA isolates showed multidrug resistance. As the MRSA isolates from the veterinary staff and dogs were of different SCCmec types, this suggests there were no cross-infections. However, environmental contamination appears to have come from dogs, and appropriate hygienic practices should be introduced to solve this problem.

Zinc Resistance within Swine-Associated Methicillin-Resistant Staphylococcus aureus Isolates in the United States Is Associated with Multilocus Sequence Type Lineage

PubMed Central

Hau, Samantha J.; Frana, Timothy; Sun, Jisun; Davies, Peter R.

2017-01-01

ABSTRACT Zinc resistance in livestock-associated methicillin-resistant Staphylococcus aureus (LA-MRSA) sequence type 398 (ST398) is primarily mediated by the czrC gene colocated with the mecA gene, encoding methicillin resistance, within the type V staphylococcal cassette chromosome mec (SCCmec) element. Because czrC and mecA are located within the same mobile genetic element, it has been suggested that the use of zinc in feed as an antidiarrheal agent has the potential to contribute to the emergence and spread of methicillin-resistant S. aureus (MRSA) in swine, through increased selection pressure to maintain the SCCmec element in isolates obtained from pigs. In this study, we report the prevalence of the czrC gene and phenotypic zinc resistance in U.S. swine-associated LA-MRSA ST5 isolates, MRSA ST5 isolates from humans with no swine contact, and U.S. swine-associated LA-MRSA ST398 isolates. We demonstrated that the prevalence of zinc resistance in U.S. swine-associated LA-MRSA ST5 isolates was significantly lower than the prevalence of zinc resistance in MRSA ST5 isolates from humans with no swine contact and swine-associated LA-MRSA ST398 isolates, as well as prevalences from previous reports describing zinc resistance in other LA-MRSA ST398 isolates. Collectively, our data suggest that selection pressure associated with zinc supplementation in feed is unlikely to have played a significant role in the emergence of LA-MRSA ST5 in the U.S. swine population. Additionally, our data indicate that zinc resistance is associated with the multilocus sequence type lineage, suggesting a potential link between the genetic lineage and the carriage of resistance determinants. IMPORTANCE Our data suggest that coselection thought to be associated with the use of zinc in feed as an antimicrobial agent is not playing a role in the emergence of livestock-associated methicillin-resistant Staphylococcus aureus (LA-MRSA) ST5 in the U.S. swine population. Additionally, our data indicate that zinc resistance is more associated with the multilocus sequence type lineage, suggesting a potential link between the genetic lineage and the carriage of resistance markers. This information is important for public health professionals, veterinarians, producers, and consumers. PMID:28526788

An Improved MLVF Method and Its Comparison with Traditional MLVF, spa Typing, MLST/SCCmec and PFGE for the Typing of Methicillin-Resistant Staphylococcus aureus

PubMed Central

Du, Xue-Fei; Xiao, Meng; Liang, Hong-Yan; Sun, Zhe; Jiang, Yue-Hong; Chen, Guo-Yu; Meng, Xiao-Yu; Zou, Gui-Ling; Zhang, Li; Liu, Ya-Li; Zhang, Hui; Sun, Hong-Li; Jiang, Xiao-Feng; Xu, Ying-Chun

2014-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) has become an important nosocomial pathogen, causing considerable morbidity and mortality. During the last 20 years, a variety of genotyping methods have been introduced for screening the prevalence of MRSA. In this study, we developed and evaluated an improved approach capillary gel electrophoresis based multilocus variable-number tandem-repeat fingerprinting (CGE/MLVF) for rapid MRSA typing. A total of 42 well-characterized strains and 116 non-repetitive clinical MRSA isolates collected from six hospitals in northeast China between 2009 and 2010 were tested. The results obtained by CGE/MLVF against clinical isolates were compared with traditional MLVF, spa typing, Multilocus sequence typing/staphylococcal cassette chromosome mec (MLST/SCCmec) and pulse field gel electrophoresis (PFGE). The discriminatory power estimated by Simpson’s index of diversity was 0.855 (28 types), 0.855 (28 patterns), 0.623 (11 types), 0.517 (8 types) and 0.854 (28 patterns) for CGE/MLVF, traditional MLVF, spa typing, MLST/SCCmec and PFGE, respectively. All methods tested showed a satisfied concordance in clonal complex level calculated by adjusted Rand’s coefficient. CGE/MLVF showed better reproducibility and accuracy than traditional MLVF and PFGE methods. In addition, the CGE/MLVF has potential to produce portable results. In conclusion, CGE/MLVF is a rapid and easy to use MRSA typing method with lower cost, good reproducibility and high discriminatory power for monitoring the outbreak and clonal spread of MRSA isolates. PMID:24406728

Differences in clinical and molecular characteristics of skin and soft tissue methicillin-resistant Staphylococcus aureus isolates between two hospitals in Northern California.

PubMed

Bhattacharya, Debika; Carleton, Heather; Tsai, Chiaojung J; Baron, Ellen Jo; Perdreau-Remington, Françoise

2007-06-01

Community-onset methicillin-resistant Staphylococcus aureus (CO-MRSA) skin and soft tissue infections (SSTI) are associated with SCCmec IV and Panton-Valentine leukocidin (PVL) genes. CO-MRSA epidemiologic studies suggest that genotypic variation exists within one geographic region. We compared MRSA genotypes and demographic and clinical characteristics of patients with CO-MRSA SSTI between two regional medical centers. We also examined factors associated with SCCmec IV and PVL carriage. A total of 279 MRSA SSTI isolates from 2000 to 2002 at San Francisco General Hospital (SFGH) and Stanford University Hospital (SUH) were genotyped by pulsed-field gel electrophoresis and PCR for SCCmec and PVL genes. Medical records were reviewed for clinical characteristics. Ninety-three percent and 69% of MRSA SSTI were caused by CO-MRSA at SFGH and SUH, respectively. Patients with CO-MRSA SSTI at SFGH were more likely to be nonwhite, younger, homeless, and have no previous exposure to health care (P < 0.01). SFGH CO-MRSA strains were more likely to carry SCCmec type IV and PVL genes (90% and 55%, respectively) than SUH strains (29% and 16%, respectively). In multivariate analyses, nonwhite ethnicity was associated with both SCCmec type IV and PVL carriage (odds ratio [OR] of 2.65 and 95% confidence interval [CI] of 1.19 to 5.95 and OR of 1.94 and 95% CI of 1.03 to 3.65, respectively). ST8:USA300:IV became the dominant clone at SFGH, but not at SUH, by 2002. Despite geographic proximity, CO-MRSA SSTI exhibited differing SCCmec types, PVL carriage, and clonal dynamics. CO-MRSA SSTI at SUH were more likely to represent feral isolates of nosocomial origin. Clinicians should assess for nosocomial and community risk factors, realizing that different populations with CO-MRSA SSTI may require separate antimicrobial strategies.

Staphylococcus aureus toxin gene hitchhikes on a transferable antibiotic resistance element.

PubMed

Otto, Michael

2010-01-01

Virulence and antibiotic resistance of the dangerous human pathogen Staphylococcus aureus are to large extent determined by the acquisition of mobile genetic elements (MGEs). Up to now, these elements were known to comprise either resistance or virulence determinants, but not a mixture of the two. Queck et al. now found a cytolysin gene of the phenol-soluble modulin (PSM) family within SCCmec elements, which contain methicillin resistance genes and are largely responsible for the spread of methicillin-resistant S. aureus (MRSA). The novel gene, called psm-mec, had a significant impact on virulence in MRSA strains that do not produce high levels of genome-encoded PSMs. This first example of a combination of toxin and resistance genes on one staphylococcal MGE shows that such bundling is possible and may lead to an even faster acquisition of toxin and resistance genes by S. aureus and other staphylococcal pathogens.

Characterisation of methicillin-resistant Staphylococcus aureus clinical isolates from animals in New Zealand, 2012-2013, and subclinical colonisation in dogs and cats in Auckland.

PubMed

Karkaba, A; Benschop, J; Hill, K E; Grinberg, A

2017-03-01

To characterise methicillin-resistant Staphylococcus aureus (MRSA) isolates from infection sites in animals in New Zealand and assess the prevalence of subclinical MRSA colonisation in dogs and cats attending veterinary clinics in Auckland. MRSA isolates from clinical specimens obtained by the main New Zealand veterinary diagnostic laboratories between June 2012 and June 2013, were genotypically characterised by DNA microarray hybridisation analysis and spa typing. In addition, nasal or perineal skin swabs collected from a cross-sectional sample of dogs (n=361) and cats (n=225) attending 29 veterinary clinics in Auckland during the same period were analysed for MRSA by culture. Eight MRSA clinical isolates were submitted for characterisation by the participating laboratories. The isolates originated from five dogs, including two isolates from the same dog, one foal, and one isolate had no identification of the source. The strain-types identified were AK3 (ST-5 SCCmecIV t045; n=1), USA500 (ST8 SCCmecIV t064; n=1), WSPP (ST30 SCCmecIV t019; n=1), Rhine Hesse (ST5 SCCmecII t002; n=2), and EMRSA-15 (ST22 SCCmecIV t032; n=3). No MRSA were isolated from 586 cultured swabs. Methicillin-susceptible S. aureus were detected in 9/257 (3.5%) swabs and non-aureus staphylococci in 22/257 (8.5%) swabs. The estimated true MRSA subclinical colonisation prevalence was 0%, with an upper 95% CI boundary of 1.9% for cats and 1.4% for dogs. The modest number of MRSA isolates submitted for this study by the participating laboratories suggests clinical MRSA infection in animals in New Zealand continues to be sporadic. The wide variety of strain-types found mirrored the evolving strain-type diversity observed in humans. We cannot rule out bias due to the non-random sampling of dogs and cats, but the apparent colonisation prevalence of 0% was consistent with the low prevalence of subclinical colonisation in humans in New Zealand. These similarities indicate the epidemiology of animal and human MRSA infections are linked. In the last decade, the prevalence of human MRSA infections in New Zealand has steadily increased. This is the second published study of MRSA in animals in New Zealand. The results indicate clinical MRSA infection in animals remains sporadic, but the diversification of the strain-types may pose new therapeutic challenges to veterinarians, due to their diverse resistome.

Livestock-associated Methicillin-Resistant Staphylococcus aureus Sequence Type 398 in Humans, Canada

PubMed Central

Golding, George R.; Bryden, Louis; Levett, Paul N.; McDonald, Ryan R.; Wong, Alice; Wylie, John; Graham, Morag R.; Tyler, Shaun; Van Domselaar, Gary; Simor, Andrew E.; Gravel, Denise

2010-01-01

Rates of colonization with livestock-associated methicillin-resistant Staphylococcus aureus (MRSA) sequence type 398 have been high for pigs and pig farmers in Canada, but prevalence rates for the general human population are unknown. In this study, 5 LA-MRSA isolates, 4 of which were obtained from skin and soft tissue infections, were identified from 3,687 tested MRSA isolates from persons in Manitoba and Saskatchewan, Canada. Further molecular characterization determined that these isolates all contained staphylococcal cassette chromosome (SCC) mecV, were negative for Panton-Valentine leukocidin, and were closely related by macrorestriction analysis with the restriction enzyme Cfr91. The complete DNA sequence of the SCCmec region from the isolate showed a novel subtype of SCCmecV harboring clustered regularly interspaced short palindromic repeats and associated genes. Although prevalence of livestock-associated MRSA seems to be low for the general population in Canada, recent emergence of infections resulting from this strain is of public health concern. PMID:20350371

A simplified multiplex PCR assay for fast and easy discrimination of globally distributed staphylococcal cassette chromosome mec types in meticillin-resistant Staphylococcus aureus.

PubMed

Ghaznavi-Rad, Ehsanollah; Nor Shamsudin, Mariana; Sekawi, Zamberi; van Belkum, Alex; Neela, Vasanthakumari

2010-10-01

A multiplex PCR assay was developed for the identification of major types and subtypes of staphylococcal cassette chromosome mec (SCCmec) in meticillin-resistant Staphylococcus aureus (MRSA) strains. The method uses a novel 9 valent multiplex PCR plus two primer pairs for S. aureus identification and detection of meticillin resistance. All 389 clinical MRSA isolates from Malaysia and 18 European isolates from the Harmony collection harbouring different SCCmec types that we tested were correctly characterized by our PCR assay. SCCmec type III and V were by far the most common types among both hospital- and community-acquired Malaysian MRSA isolates, with an apparent emergence of MRSA harbouring the IVh type.

High frequency of methicillin-resistant Staphylococcus aureus (MRSA) with SCCmec type III and spa type t030 in Karaj's teaching hospitals, Iran.

PubMed

Bayat, Bahareh; Zade, Masoumeh Hallaj; Mansouri, Samaneh; Kalantar, Enayat; Kabir, Kourosh; Zahmatkesh, Ehsan; Sepehr, Mohammad Noori; Naseri, Mohammmad Hassan; Darban-Sarokhalil, Davood

2017-09-01

Methicillin-resistant Staphylococcus aureus (MRSA) has been one of the most important antibiotic-resistant pathogen in many parts of the world over the past decades. This cross-sectional study was conducted to investigate MRSA isolated between July 2013 and July 2014 in Karaj, Iran. All tested isolates were collected in teaching hospitals from personnel, patients, and surfaces and each MRSA was analyzed by SCCmec and spa typing. Antibiotic susceptibility testing was accomplished by disk diffusion method. Out of 49 MRSA isolates from the Karaj's teaching hospitals, 82%, 10%, and 6% of the isolates were SCCmec types III, II, and I, respectively. The main spa type in this study was spa t030 with frequency as high as 75.5% from intensive care unit (ICU) of the hospitals and high rate of resistance to rifampicin (53%) was found in MRSA isolates. In conclusion, high frequency of spa t030 with SCCmec type III and MRSA phenotype illustrated circulating of one of the antibiotic-resistant strains in ICU of Karaj's teaching hospitals and emphasizes the need for ongoing molecular surveillance, antibiotic susceptibility monitoring, and infection control.

Evidence for a purifying selection acting on the β-lactamase locus in epidemic clones of methicillin-resistant Staphylococcus aureus.

PubMed

Milheiriço, Catarina; Portelinha, Ana; Krippahl, Ludwig; de Lencastre, Hermínia; Oliveira, Duarte C

2011-04-15

The β-lactamase (bla) locus, which confers resistance to penicillins only, may control the transcription of mecA, the central element of methicillin resistance, which is embedded in a polymorphic heterelogous chromosomal cassette (the SCCmec element). In order to assess the eventual correlation between bla allotypes and genetic lineages, SCCmec types and/or β-lactam resistance phenotypes, the allelic variation on the bla locus was evaluated in a representative collection of 54 international epidemic methicillin-resistant Staphylococcus aureus (MRSA) clinical strains and, for comparative purposes, also in 24 diverse methicillin-susceptible S. aureus (MSSA) strains. Internal fragments of blaZ (the β-lactamase structural gene) were sequenced for all strains. A subset of strains, representative of blaZ allotypes, was further characterized by sequencing of internal fragments of the blaZ transcriptional regulators, blaI and blaR1. Thirteen allotypes for blaZ, nine for blaI and 12 for blaR1 were found. In a total of 121 unique single-nucleotide polymorphisms (SNP) detected, no frameshift mutations were identified and only one nonsense mutation within blaZ was found in a MRSA strain. On average, blaZ alleles were more polymorphic among MSSA than in MRSA (14.7 vs 11.4 SNP/allele). Overall, blaR1 was the most polymorphic gene with an average of 24.8 SNP/allele. No correlation could be established between bla allotypes and genetic lineages, SCCmec types and/or β-lactam resistance phenotypes. In order to estimate the selection pressure acting on the bla locus, the average dN/dS values were computed. In the three genes and in both collections dN/dS ratios were significantly below 1. The data strongly suggests the existence of a purifying selection to maintain the bla locus fully functional even on MRSA strains. Although, this is in agreement with the notion that in most clinical MRSA strains mecA gene is under the control of the bla regulatory genes, these findings also suggest that the apparently redundant function of blaZ gene for the MRSA resistant phenotype is still important for these strains. In addition, the data shows that the sensor-inducer blaR1 is the primary target for the accumulation of mutations in the bla locus, presumably to modulate the response to the presence of β-lactam antibiotic.

Distribution of the ACME-arcA gene among meticillin-resistant Staphylococcus haemolyticus and identification of a novel ccr allotype in ACME-arcA-positive isolates.

PubMed

Pi, Borui; Yu, Meihong; Chen, Yagang; Yu, Yunsong; Li, Lanjuan

2009-06-01

The aim of this study was to investigate the prevalence and characteristics of ACME (arginine catabolic mobile element)-arcA-positive isolates among meticillin-resistant Staphylococcus haemolyticus (MRSH). ACME-arcA, native arcA and SCCmec elements were detected by PCR. Susceptibilities to 10 antimicrobial agents were compared between ACME-arcA-positive and -negative isolates by chi-square test. PFGE was used to investigate the clonal relatedness of ACME-arcA-positive isolates. The phylogenetic relationships of ACME-arcA and native arcA were analysed using the neighbour-joining methods of mega software. A total of 42 (47.7 %) of 88 isolates distributed in 13 PFGE types were positive for the ACME-arcA gene. There were no significant differences in antimicrobial susceptibility between ACME-arcA-positive and -negative isolates. A novel ccr allotype (ccrAB(SHP)) was identified in ACME-arcA-positive isolates. Among 42 ACME-arcA-positive isolates: 8 isolates harboured SCCmec V, 8 isolates harboured class C1 mec complex and ccrAB(SHP); 22 isolates harbouring class C1 mec complex and 4 isolates harbouring class C2 mec complex were negative for all known ccr allotypes. The ACME-arcA-positive isolates were first found in MRSH with high prevalence and clonal diversity, which suggests a mobility of ACME within MRSH. The results from this study revealed that MRSH is likely to be one of the potential reservoirs of ACME for Staphylococcus aureus.

Diversity of staphylococcal cassette chromosome mec elements in nosocomial multiresistant Staphylococcus haemolyticus isolates.

PubMed

Szczuka, Ewa; Krajewska, Magdalena; Lijewska, Dagmara; Bosacka, Karolina; Kaznowski, Adam

2016-11-01

Staphylococcus haemolyticus is the second, most frequently isolated coagulase-negative staphyloccus (CoNS) from patients with hospital-acquired infections, and it is usually resistant to methicillin and other semisynthetic penicillins. The purpose of this study was to characterize staphylococcal cassette chromosome mec (SCCmec) elements and assess the in-vitro activity of antibiotics against 60 S. haemolyticus strains recovered from hospitalized patients. All these strains expressed methicillin resistance and carried a mecA gene. Moreover, all strains possessed a multiresistant phenotype, i.e., exhibited resistance to more than three classes of antibiotics. Eleven strains (18 %) harbored the SCCmec type V, containing ccrC and mec complex C. Three isolates harboring the ccrC gene did not contain a known mec complex. One strain positive for mec complex C was not typeable for ccr. This suggests that ccrC and mec complex C may exist autonomously. Only four strains carried mec complex B, whereas none of the S. haemolyticus harboured mec complex A. A new combination, which is mec complex B-ccrAB ship , was found in S. haemolitycus. The ccrAB ship was also identified in two strains of S. haemolitycus in which the mec gene complex was not identified. The results of the present study indicate that in S. haemolyticus the mec gene complex and the ccr genes are highly divergent. However, ccr sequence analysis does not allow the identification of a new allotype, based on a cut-off value of 85 % identity. The ccr genes in the S. haemolitycus strain showed ≥96 % sequence identity to the ccrAB2 genes.

Origin and Evolution of European Community-Acquired Methicillin-Resistant Staphylococcus aureus

PubMed Central

Wirth, Thierry; Andersen, Paal S.; Skov, Robert L.; De Grassi, Anna; Simões, Patricia Martins; Tristan, Anne; Petersen, Andreas; Aziz, Maliha; Kiil, Kristoffer; Cirković, Ivana; Udo, Edet E.; del Campo, Rosa; Vuopio-Varkila, Jaana; Ahmad, Norazah; Tokajian, Sima; Peters, Georg; Schaumburg, Frieder; Olsson-Liljequist, Barbro; Givskov, Michael; Driebe, Elizabeth E.; Vigh, Henrik E.; Shittu, Adebayo; Ramdani-Bougessa, Nadjia; Rasigade, Jean-Philippe; Price, Lance B.; Vandenesch, Francois; Larsen, Anders R.; Laurent, Frederic

2014-01-01

ABSTRACT Community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) was recognized in Europe and worldwide in the late 1990s. Within a decade, several genetically and geographically distinct CA-MRSA lineages carrying the small SCCmec type IV and V genetic elements and the Panton-Valentine leukocidin (PVL) emerged around the world. In Europe, the predominant CA-MRSA strain belongs to clonal complex 80 (CC80) and is resistant to kanamycin/amikacin and fusidic acid. CC80 was first reported in 1993 but was relatively rare until the late 1990s. It has since been identified throughout North Africa, the Middle East, and Europe, with recent sporadic reports in sub-Saharan Africa. While strongly associated with skin and soft tissue infections, it is rarely found among asymptomatic carriers. Methicillin-sensitive S. aureus (MSSA) CC80 strains are extremely rare except in sub-Saharan Africa. In the current study, we applied whole-genome sequencing to a global collection of both MSSA and MRSA CC80 isolates. Phylogenetic analyses strongly suggest that the European epidemic CA-MRSA lineage is derived from a PVL-positive MSSA ancestor from sub-Saharan Africa. Moreover, the tree topology suggests a single acquisition of both the SCCmec element and a plasmid encoding the fusidic acid resistance determinant. Four canonical SNPs distinguish the derived CA-MRSA lineage and include a nonsynonymous mutation in accessory gene regulator C (agrC). These changes were associated with a star-like expansion into Europe, the Middle East, and North Africa in the early 1990s, including multiple cases of cross-continent imports likely driven by human migrations. PMID:25161186

Susceptibility Profile of Staphylococcus epidermidis and Staphylococcus haemolyticus Isolated from Blood Cultures to Vancomycin and Novel Antimicrobial Drugs over a Period of 12 Years.

PubMed

Pinheiro, Luiza; Brito, Carla Ivo; Pereira, Valéria Cataneli; Oliveira, Adilson; Bartolomeu, Ariane Rocha; Camargo, Carlos Henrique; Cunha, Maria Lourdes Ribeiro Souza

2016-06-01

The aim of this study was to evaluate the antimicrobial susceptibility profile of 85 Staphylococcus epidermidis and 84 Staphylococcus haemolyticus strains isolated from blood cultures to oxacillin, vancomycin, tigecycline, linezolid, daptomycin, and quinupristin/dalfopristin over a period of 12 years. S. epidermidis and S. haemolyticus isolated from blood cultures of inpatients, attended at a teaching hospital, were analyzed for the presence of the mecA gene and by SCCmec typing. The minimum inhibitory concentration (MIC) values of tigecycline, linezolid, daptomycin, quinupristin/dalfopristin, and vancomycin were determined. Isolates exhibiting vancomycin MICs of ≥2 μg/ml were typed by pulsed-field gel electrophoresis (PFGE). The rate of mecA positivity was 92.9% and 100% in S. epidermidis and S. haemolyticus, respectively. The most frequent SCCmec types were type III (53.2%) in S. epidermidis and type I (32.1%) in S. haemolyticus. All isolates were susceptible to linezolid and daptomycin, but 7.1% of S. haemolyticus and 2.3% of S. epidermidis isolates were resistant to tigecycline, and 1.2% each of S. haemolyticus and S. epidermidis were resistant and intermediately resistant to quinupristin/dalfopristin, respectively. S. epidermidis exhibited higher vancomycin MICs (40% with MIC of ≥2 μg/ml). Clonal typing of strains with vancomycin MIC of ≥2 μg/ml revealed the presence of different PFGE types of S. epidermidis and S. haemolyticus over a period of up to 4 years (2002-2004, 2005-2008, 2006-2009, 2010-2011). Despite the observation of a high prevalence of mecA, the clinical strains were fully susceptible to vancomycin and to the new drugs linezolid, daptomycin, tigecycline, and quinupristin/dalfopristin. The PFGE types with vancomycin MIC of ≥2 μg/ml exhibited a great diversity of SCCmec cassettes, demonstrating that S. epidermidis and S. haemolyticus may easily acquire these resistance-conferring genetic elements.

Methicillin-resistant Staphylococcus aureus nasal carriage between healthy students of medical and nonmedical universities.

PubMed

Abroo, Soleiman; Hosseini Jazani, Nima; Sharifi, Yaeghob

2017-07-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a challenge for public health, and community-acquired (CA) infections seem to be increasing among people in different areas. A total of 700 healthy student volunteers residing in dormitories of universities in Urmia, Iran, were enrolled in this study. After identification of the isolates, antibiotic susceptibility, presence of mecA and pvl genes, and staphylococcal cassette chromosome mec (SCCmec) typing were evaluated. Nasal screening identified 137 (19.6%) carriers of S aureus, and 18 (13.14%) were MRSA isolates. The antimicrobial susceptibility patterns of isolates revealed high resistance to penicillin (93.4%). All isolates were sensitive to vancomycin. The SCCmec typing showed that most MRSA strains belonged to SCCmec type IV (n = 14; 77.8%). Only 1 (5.56%) MRSA isolates carried the pvl gene. Our findings revealed the relatively high frequency of S aureus nasal carriers and the advent of multidrug resistance among these isolates. Most MRSA isolates were SCCmec type IV; the transfer of such MRSA strains from carriers to other individuals in crowded living conditions such as dormitories can act as a risk factor for outbreak of CA MRSA and is a serious threat for the study groups. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Determination of staphylococcal exotoxins, SCCmec types, and genetic relatedness of Staphylococcus intermedius group isolates from veterinary staff, companion animals, and hospital environments in Korea

PubMed Central

Youn, Jung-Ho; Ahn, Kuk Ju; Lim, Suk-Kyung

2011-01-01

The Staphylococcus (S.) intermedius group (SIG) has been a main research subject in recent years. S. pseudintermedius causes pyoderma and otitis in companion animals as well as foodborne diseases. To prevent SIG-associated infection and disease outbreaks, identification of both staphylococcal exotoxins and staphylococcal cassette chromosome mec (SCCmec) types among SIG isolates may be helpful. In this study, it was found that a single isolate (one out of 178 SIG isolates examined) harbored the canine enterotoxin SEC gene. However, the S. intermedius exfoliative toxin gene was found in 166 SIG isolates although the S. aureus-derived exfoliative toxin genes, such as eta, etb and etd, were not detected. SCCmec typing resulted in classifying one isolate as SCCmec type IV, 41 isolates as type V (including three S. intermedius isolates), and 10 isolates as non-classifiable. Genetic relatedness of all S. pseudintermedius isolates recovered from veterinary staff, companion animals, and hospital environments was determined by pulsed-field gel electrophoresis. Strains having the same band patterns were detected in S. pseudintermedius isolates collected at 13 and 18 months, suggesting possible colonization and/or expansion of a specific S. pseudintermedius strain in a veterinary hospital. PMID:21897094

Determination of staphylococcal exotoxins, SCCmec types, and genetic relatedness of Staphylococcus intermedius group isolates from veterinary staff, companion animals, and hospital environments in Korea.

PubMed

Youn, Jung-Ho; Koo, Hye Cheong; Ahn, Kuk Ju; Lim, Suk-Kyung; Park, Yong Ho

2011-09-01

The Staphylococcus (S.) intermedius group (SIG) has been a main research subject in recent years. S. pseudintermedius causes pyoderma and otitis in companion animals as well as foodborne diseases. To prevent SIG-associated infection and disease outbreaks, identification of both staphylococcal exotoxins and staphylococcal cassette chromosome mec (SCCmec) types among SIG isolates may be helpful. In this study, it was found that a single isolate (one out of 178 SIG isolates examined) harbored the canine enterotoxin SEC gene. However, the S. intermedius exfoliative toxin gene was found in 166 SIG isolates although the S. aureus-derived exfoliative toxin genes, such as eta, etb and etd, were not detected. SCCmec typing resulted in classifying one isolate as SCCmec type IV, 41 isolates as type V (including three S. intermedius isolates), and 10 isolates as non-classifiable. Genetic relatedness of all S. pseudintermedius isolates recovered from veterinary staff, companion animals, and hospital environments was determined by pulsed-field gel electrophoresis. Strains having the same band patterns were detected in S. pseudintermedius isolates collected at 13 and 18 months, suggesting possible colonization and/or expansion of a specific S. pseudintermedius strain in a veterinary hospital.

Characterization of Staphylococcus aureus Isolated from Food Products in Western Algeria.

PubMed

Chaalal, Wafaa; Chaalal, Nadia; Bourafa, Nadjette; Kihal, Mebrouk; Diene, Seydina M; Rolain, Jean-Marc

2018-03-15

The current study aimed to characterize Staphylococcus aureus isolates from foodstuffs collected from western Algeria. A total of 153 S. aureus isolates from various raw and processed foods were obtained and identified using matrix-assisted laser desorption and ionization time-of-flight mass spectrometry. Isolates were characterized by antimicrobial susceptibility testing and toxin gene detection. Methicillin-resistant Staphylococcus aureus (MRSA) isolates were identified by detection of the mecA gene and characterized by staphylococcal cassette chromosome mec (SCCmec) typing. We found that 30.9% (153/495) of food samples were contaminated with S. aureus. Thirty-three (21.5%) S. aureus isolates were identified as MRSA, and 16.9% (26/153) carried the mecA gene. Three SCCmec types were identified of which type IV was the most common (69.2%) followed by type V (15.3%) and type II (7.6%). Two MRSA isolates were not typable with SCCmec typing. None of the examined isolates harbored mecC. Furthermore, 14.3% (22/153) of the isolates were toxigenic S. aureus. The cytotoxin gene pvl was detected in 11.1% of the S. aureus isolates. This gene was more commonly detected (76.4%) in MRSA isolates than in methicillin-suceptible Staphylococcus aureus (MSSA) isolates. The tsst-1 gene coding for toxic shock syndrome toxin was isolated rarely (3.2%) and only in MSSA isolates. According to disk diffusion test results, 70 isolates were resistant to only one antimicrobial drug, and 51 (33.3%) isolates were multidrug resistant. Other 32 isolates were susceptible to all antibiotics. Our study highlights, for the first time, a high prevalence of multidrug-resistant S. aureus isolates carrying pvl or tsst-1 found in food products in Algeria. The risk of MRSA transmission through the food chain cannot be disregarded, particularly in uncooked foods.

Genetic shifts in methicillin-resistant Staphylococcus aureus epidemic clones and toxin gene profiles in Japan: comparative analysis among pre-epidemic, epidemic and post-epidemic phases.

PubMed

Osaka, Shunsuke; Okuzumi, Katsuko; Koide, Shota; Tamai, Kiyoko; Sato, Tomoaki; Tanimoto, Koichi; Tomita, Haruyoshi; Suzuki, Masahiro; Nagano, Yukiko; Shibayama, Keigo; Arakawa, Yoshichika; Nagano, Noriyuki

2018-03-01

The decline in methicillin-resistant Staphylococcus aureus (MRSA) isolation rates has become a general observation worldwide, including Japan. We hypothesized that some genetic shift in MRSA might cause this phenomenon, and therefore we investigated the genetic profiles among MRSA clinical isolates obtained from three different epidemic phases in Japan. A total of 353 MRSA isolates were selected from 202 medical facilities in 1990 (pre-epidemic phase), 2004 (epidemic phase) and 2016 (post-epidemic phase). Molecular typing was performed by PCR detection of 22 genes using the polymerase chain reaction (PCR)-based ORF typing (POT) system, including an additional eight genes including small genomic islets and seven toxin genes. Isolates with a POT1 of score 93, identified as presumed clonal complex (pCC)5-staphylococcal cassette chromosome mec (SCCmec) type II including ST5-SCCmec type II New York/Japan clone, represented the major epidemic MRSA lineage in 1990 and 2004. In 2016, however, a marked decrease in isolates with a POT1 score of 93, along with changes in the epidemiology of toxin genes carried, was noted, where the carriers of tst genes including the tst-sec combination were markedly reduced, and those possessing the seb gene alone were markedly increased. Rather, isolates with a POT1 score of 106, including pCC1 or pCC8 among the isolates with SCCmec type IV, which often links to community-associated MRSA, were predominant. Interestingly, the pCC1 and pCC8 lineages were related to sea and tst-sec carriage, respectively. Over time, a transition in MRSA genetic profiles from a POT1 score of 93 in 1990 and 2004 to 106 in 2014 was found in Japan.

Prospective Multicenter Study of Community-Associated Skin and Skin Structure Infections due to Methicillin-Resistant Staphylococcus aureus in Buenos Aires, Argentina

PubMed Central

López Furst, María José; de Vedia, Lautaro; Fernández, Silvina; Gardella, Noella; Ganaha, María Cristina; Prieto, Sergio; Carbone, Edith; Lista, Nicolás; Rotryng, Flavio; Morera, Graciana I.; Mollerach, Marta; Stryjewski, Martín E.

2013-01-01

Background Community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) is now the most common cause of skin and skin structure infections (SSSI) in several world regions. In Argentina prospective, multicenter clinical studies have only been conducted in pediatric populations. Objective Primary: describe the prevalence, clinical and demographic characteristics of adult patients with community acquired SSSI due to MRSA; secondary: molecular evaluation of CA-MRSA strains. Patients with MRSA were compared to those without MRSA. Materials and Methods Prospective, observational, multicenter, epidemiologic study, with molecular analysis, conducted at 19 sites in Argentina (18 in Buenos Aires) between March 2010 and October 2011. Patients were included if they were ≥14 years, were diagnosed with SSSI, a culture was obtained, and there had no significant healthcare contact identified. A logistic regression model was used to identify factors associated with CA-MRSA. Pulse field types, SCCmec, and PVL status were also determined. Results A total of 311 patients were included. CA-MRSA was isolated in 70% (218/311) of patients. Clinical variables independently associated with CA-MRSA were: presence of purulent lesion (OR 3.29; 95%CI 1.67, 6.49) and age <50 years (OR 2.39; 95%CI 1.22, 4.70). The vast majority of CA-MRSA strains causing SSSI carried PVL genes (95%) and were SCCmec type IV. The sequence type CA-MRSA ST30 spa t019 was the predominant clone. Conclusions CA-MRSA is now the most common cause of SSSI in our adult patients without healthcare contact. ST30, SCCmec IV, PVL+, spa t019 is the predominant clone in Buenos Aires, Argentina. PMID:24324543

Prevalence, Virulence Genes, Antimicrobial Susceptibility, and Genetic Diversity of Staphylococcus aureus from Retail Aquatic Products in China

PubMed Central

Rong, Dongli; Wu, Qingping; Xu, Mingfang; Zhang, Jumei; Yu, Shubo

2017-01-01

Staphylococcus aureus is an important food-borne opportunistic pathogen that frequently causes severe blood and tissue infections or even fatal illnesses. Although S. aureus has been extensively studied in livestock and poultry foods in China, limited information has been reported in aquatic products. Accordingly, in this study, we aimed to characterize S. aureus in aquatic products purchased from retail markets in China. In total, 320 aquatic food samples were collected from 32 provincial capitals in China. The results showed that 119 samples (37.2%, 119/320) were positive for S. aureus by both qualitative and quantitative analyses. The contamination levels of 78.2% of samples ranged from 0.3 to 10 MPN/g, and six samples exceeded 110 MPN/g. A total of 119 S. aureus isolates from positive samples were selected to evaluate virulence factors, antibiotic resistance, and molecular characteristics. All S. aureus isolates were evaluated for the presence of 11 virulence genes by multiplex polymerase chain reaction, and α-hemolysin (hlα, 84.9%), fibronectin-binding protein A (fnbA, 79.0%), S. aureus enterotoxin E (see, 53.8%), and Panton-Valentine leucocidin (pvl, 50.4%) were identified as the major genes. These genes formed 56 different profiles, with the major profile identified as pvl-hlα-fnbA (28.6%). The antimicrobial susceptibility of all isolates was analyzed through the disk diffusion method, and the results showed high resistance to β-lactams, macrolides and tetracyclines, but susceptibility to linezolid and vancomycin. In addition, 26 sequence types (STs) were obtained via multilocus sequence typing, including seven novel STs, among which ST1 (20.2%), ST15 (18.5%), and ST188 (13.4%) were the most common STs. All the isolates were mecC negative, but nine isolates carrying mecA were evaluated by staphylococcal cassette chromosome mec (SCCmec) typing, all of which were SCCmecIII or SCCmecIV types. Isolates of SCCmecIII showed a high prevalence and were multidrug resistant. Our results showed that aquatic products could be a vehicle for transmission of virulence genes and multidrug-resistant S. aureus, representing a potential public health risk. The STs identified in this study indicated the genetic diversity of S. aureus, thereby providing important basic data for the dissemination of S. aureus in aquatic products. PMID:28473827

Surveillance of Methicillin-Resistant Staphylococcus aureus in a Pediatric Hospital in Mexico City during a 7-Year Period (1997 to 2003): Clonal Evolution and Impact of Infection Control

PubMed Central

Velazquez-Meza, M. E.; Aires de Sousa, M.; Echaniz-Aviles, G.; Solórzano-Santos, F.; Miranda-Novales, G.; Silva-Sanchez, J.; de Lencastre, H.

2004-01-01

Between 1997 and 2000 a single multidrug-susceptible methicillin-resistant Staphylococcus aureus clone, M (sequence type 30 [ST30]-staphylococcal cassette chromosome mec [SCCmec] type IV), was present in a pediatric hospital in Mexico City, Mexico. In 2001 the international multidrug-resistant New York-Japan clone (ST5-SCCmec type II) was introduced into the hospital, completely replacing clone M by 2002. PMID:15297554

Molecular characterization of nasal methicillin resistant Staphylococcus aureus isolates from workers of an automaker company in southeast Iran.

PubMed

Sobhanipoor, Mohammad Hossein; Ahmadrajabi, Roya; Karmostaji, Afsaneh; Saffari, Fereshteh

2017-10-01

Colonization of methicillin resistant Staphylococccus aureus (MRSA) can occur more commonly in healthy people who live in close together or are in close physical contact with each other. Having knowledge about the molecular characteristics of these strains provides considerable discernment into the epidemiology of this important microorganism. A total of 806 nasal swabs were collected from healthy workers of an automaker company in the southeast of Iran and were analyzed to detect MRSA isolates. Multilocus sequence typing (MLST), spa typing, and detection of staphylococcal cassette chromosome mec (SCCmec) were performed. The presence of genes encoding Panton-Valentine Leukocidin (PVL) and Arginine Catabolic Mobile Element (ACME) were also investigated. Carriage rate of S. aureus was 20%. Among 10 identified MRSA, no acme was found while high prevalence of pvl (60%) was of great concern. Seven different spa types including five new ones were identified. The most frequent sequence type was the novel one; ST 3373 (n = 3), followed by each of ST22, ST88, ST859 (n = 2) and ST1955 (n = 1). MRSA isolates were clustered into two main clonal complexes; CC22 (n = 6) and CC88 (n = 4). Low genetic diversity with the dominance of CC22, SCCmecIV was found. Distribution of previously found hospital-associated MRSA was demonstrated among our isolates. © 2017 APMIS. Published by John Wiley & Sons Ltd.

Staphylococcal SCCmec elements encode an active MCM-like helicase and thus may be replicative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mir-Sanchis, Ignacio; Roman, Christina A.; Misiura, Agnieszka

2016-08-29

Methicillin-resistant Staphylococcus aureus (MRSA) is a public-health threat worldwide. Although the mobile genomic island responsible for this phenotype, staphylococcal cassette chromosome (SCC), has been thought to be nonreplicative, we predicted DNA-replication-related functions for some of the conserved proteins encoded by SCC. We show that one of these, Cch, is homologous to the self-loading initiator helicases of an unrelated family of genomic islands, that it is an active 3'-to-5' helicase and that the adjacent ORF encodes a single-stranded DNA–binding protein. Our 2.9-Å crystal structure of intact Cch shows that it forms a hexameric ring. Cch, like the archaeal and eukaryotic MCM-familymore » replicative helicases, belongs to the pre–sensor II insert clade of AAA+ ATPases. Additionally, we found that SCC elements are part of a broader family of mobile elements, all of which encode a replication initiator upstream of their recombinases. Replication after excision would enhance the efficiency of horizontal gene transfer.« less

Cost-Effectiveness and Efficacy of spa, SCCmec, and PVL Genotyping of Methicillin-Resistant Staphylococcus aureus as Compared to Pulsed-Field Gel Electrophoresis

PubMed Central

Li, Vincent; Chui, Linda; Louie, Lisa; Simor, Andrew; Golding, George R.; Louie, Marie

2013-01-01

Pulsed-field gel electrophoresis (PFGE) is a valuable molecular typing assay used for methicillin-resistant Staphylococcus aureus (MRSA) surveillance and genotyping. However, there are several limitations associated with PFGE. In Alberta, Canada, the significant increase in the number of MRSA isolates submitted to the Provincial Laboratory for Public Health (ProvLab) for PFGE typing led to the need for an alternative genotyping method. In this study, we describe the transition from PFGE to Staphylococcus protein A (spa), Staphylococcal cassette chromosome (SCCmec), and Panton-Valentine leukocidin (PVL) typing. A total of 1915 clinical MRSA isolates collected from 2005 to 2009 were used to develop and validate an algorithm for assigning PFGE epidemic types using spa, SCCmec, and PVL typing and the resulting data was used to populate a new Alberta MRSA typing database. An additional 12620 clinical MRSA isolates collected from 2010 to 2012 as part of ongoing routine molecular testing at ProvLab were characterized using the new typing algorithm and the Alberta MRSA typing database. Switching to spa, SCCmec, and PVL from PFGE typing substantially reduced hands-on and turn-around times while maintaining historical PFGE epidemic type designations. This led to an approximate $77,000 reduction in costs from 2010 to 2012. PFGE typing is still required for a small subset of MRSA isolates that have spa types that are rare, novel, or associated with more than one PFGE epidemic type. PMID:24244440

The human clone ST22 SCCmec IV methicillin-resistant Staphylococcus aureus isolated from swine herds and wild primates in Nepal: is man the common source?

PubMed

Roberts, Marilyn C; Joshi, Prabhu Raj; Greninger, Alexander L; Melendez, Daira; Paudel, Saroj; Acharya, Mahesh; Bimali, Nabin Kishor; Koju, Narayan P; No, David; Chalise, Mukesh; Kyes, Randall C

2018-05-01

Swine nasal samples [n = 282] were collected from 12 randomly selected farms around Kathmandu, Nepal, from healthy animals. In addition, wild monkey (Macaca mulatta) saliva samples [n = 59] were collected near temples areas in Kathmandu using a non-invasive sampling technique. All samples were processed for MRSA using standardized selective media and conventional biochemical tests. MRSA verification was done and isolates characterized by SCCmec, multilocus sequence typing, whole genome sequencing [WGS] and antibiotic susceptibilities. Six (2.1%) swine MRSA were isolated from five of the different swine herds tested, five were ST22 type IV and one ST88 type V. Four (6.8%) macaques MRSA were isolated, with three ST22 SCCmec type IV and one ST239 type III. WGS sequencing showed that the eight ciprofloxacin resistant ST22 isolates carried gyrA mutation [S84L]. Six isolates carried the erm(C) genes, five isolates carried aacC-aphD genes and four isolates carried blaZ genes. The swine linezolid resistant ST22 did not carry any known acquired linezolid resistance genes but had a mutation in ribosomal protein L22 [A29V] and an insertion in L4 [68KG69], both previously associated with linezolid resistance. Multiple virulence factors were also identified. This is the first time MRSA ST22 SCCmec IV has been isolated from livestock or primates.

Molecular epidemiology of community-onset methicillin-resistant Staphylococcus aureus infections in Israel.

PubMed

Biber, A; Parizade, M; Taran, D; Jaber, H; Berla, E; Rubin, C; Rahav, G; Glikman, D; Regev-Yochay, G

2015-08-01

Data on community-associated (CA) methicillin-resistant Staphylococcus aureus (MRSA) in Israel are scarce. The objective of this study was to characterize the major CA-MRSA clones in Israel. All clinical MRSA isolates detected in the community during a period of 2.5 years (2011-2013) from individuals insured by a major health maintenance organization in Israel were collected, with additional data from medical records. Antibiotic susceptibility patterns and staphylococcal chromosomal cassette mec (SCCmec) typing were determined. SCCmec IV and V isolates were further typed by pulsed-field gel electrophoresis (PFGE), spa typing, and detection of a panel of toxin genes. MRSA were detected in 280 patients, mostly from skin infections. Patients with SCCmec IV (n = 120, 43 %) were younger (p < 0.0001) and reported less contact with healthcare facilities. Almost all isolates were trimethoprim-sulfamethoxazole susceptible (98 %). spa-CC032, a typical nosocomial MRSA clone, accounted for 28 % of SCCmec IV. The two major CA-MRSA clones were t008 USA300 (13 %) and t991 (10 %); t991 was isolated mainly from children (75 %), was Panton-Valentine leukocidin (PVL) negative but eta-positive, and was typically susceptible to most antibiotic groups. PVL-positive strains (n = 31) included mainly USA300 (52 %) and t019 (13 %). While multiple genetic lineages were evident among community-onset MRSA in Israel, approximately 20 % are typical CA-MRSA clones, mainly USA300 and a local clone, t991.

SCCmecFinder, a Web-Based Tool for Typing of Staphylococcal Cassette Chromosome mec in Staphylococcus aureus Using Whole-Genome Sequence Data.

PubMed

Kaya, Hülya; Hasman, Henrik; Larsen, Jesper; Stegger, Marc; Johannesen, Thor Bech; Allesøe, Rosa Lundbye; Lemvigh, Camilla Koldbæk; Aarestrup, Frank Møller; Lund, Ole; Larsen, Anders Rhod

2018-01-01

Typing of methicillin-resistant Staphylococcus aureus (MRSA) is important in infection control and surveillance. The current nomenclature of MRSA includes the genetic background of the S. aureus strain determined by multilocus sequence typing (MLST) or equivalent methods like spa typing and typing of the mobile genetic element staphylococcal cassette chromosome mec (SCC mec ), which carries the mecA or mecC gene. Whereas MLST and spa typing are relatively simple, typing of SCC mec is less trivial because of its heterogeneity. Whole-genome sequencing (WGS) provides the essential data for typing of the genetic background and SCC mec , but so far, no bioinformatic tools for SCC mec typing have been available. Here, we report the development and evaluation of SCC mec Finder for characterization of the SCC mec element from S. aureus WGS data. SCC mec Finder is able to identify all SCC mec element types, designated I to XIII, with subtyping of SCC mec types IV (2B) and V (5C2). SCC mec elements are characterized by two different gene prediction approaches to achieve correct annotation, a Basic Local Alignment Search Tool (BLAST)-based approach and a k -mer-based approach. Evaluation of SCC mec Finder by using a diverse collection of clinical isolates ( n = 93) showed a high typeability level of 96.7%, which increased to 98.9% upon modification of the default settings. In conclusion, SCC mec Finder can be an alternative to more laborious SCC mec typing methods and is freely available at https://cge.cbs.dtu.dk/services/SCCmecFinder. IMPORTANCE SCC mec in MRSA is acknowledged to be of importance not only because it contains the mecA or mecC gene but also for staphylococcal adaptation to different environments, e.g., in hospitals, the community, and livestock. Typing of SCC mec by PCR techniques has, because of its heterogeneity, been challenging, and whole-genome sequencing has only partially solved this since no good bioinformatic tools have been available. In this article, we describe the development of a new bioinformatic tool, SCC mec Finder, that includes most of the needs for infection control professionals and researchers regarding the interpretation of SCC mec elements. The software detects all of the SCC mec elements accepted by the International Working Group on the Classification of Staphylococcal Cassette Chromosome Elements, and users will be prompted if diverging and potential new elements are uploaded. Furthermore, SCC mec Finder will be curated and updated as new elements are found and it is easy to use and freely accessible.

Molecular characteristics of clinical methicillin-resistant Staphylococcus pseudintermedius harboring arginine catabolic mobile element (ACME) from dogs and cats.

PubMed

Yang, Ching; Wan, Min-Tao; Lauderdale, Tsai-Ling; Yeh, Kuang-Sheng; Chen, Charles; Hsiao, Yun-Hsia; Chou, Chin-Cheng

2017-06-01

This study aimed to investigate the presence of arginine catabolic mobile element (ACME) and its associated molecular characteristics in methicillin-resistant Staphylococcus pseudintermedius (MRSP). Among the 72 S. pseudintermedius recovered from various infection sites of dogs and cats, 52 (72.2%) were MRSP. ACME-arcA was detected commonly (69.2%) in these MRSP isolates, and was more frequently detected in those from the skin than from other body sites (P=0.047). There was a wide genetic diversity among the ACME-arcA-positive MRSP isolates, which comprised three SCCmec types (II-III, III and V) and 15 dru types with two predominant clusters (9a and 11a). Most MRSP isolates were multidrug-resistant. Since S. pseudintermedius could serve as a reservoir of ACME, further research on this putative virulence factor is recommended. Copyright © 2017 Elsevier Ltd. All rights reserved.

High prevalence of methicillin-resistant Staphylococcus aureus (MRSA) carrying the mecC gene in a semi-extensive red deer (Cervus elaphus hispanicus) farm in Southern Spain.

PubMed

Gómez, Paula; Lozano, Carmen; González-Barrio, David; Zarazaga, Myriam; Ruiz-Fons, Francisco; Torres, Carmen

2015-06-12

The objective was to determine the prevalence of Staphylococcus aureus nasal carriage in red deer of a semi-extensive farm and in humans in contact with the estate animals, and to characterize obtained isolates. Nasal swabs of 65 deer and 15 humans were seeded on mannitol-salt-agar and oxacillin-resistance-screening-agar-base. Isolates were identified by microbiological and molecular methods. Antimicrobial susceptibility profile was determined for 16 antibiotics by disk-diffusion and the presence of eight antibiotic resistance genes, seven virulence genes and genes of immune-evasion-cluster (IEC) was analyzed by PCR. S. aureus was typed by PFGE-SmaI, spa, agr, SCCmec and MLST. Isolates were detected in 16 deer (24.6%). Eleven S. aureus isolates were methicillin-resistant (MRSA), and five were methicillin-susceptible (MSSA). All MRSA harbored mecC gene and were agr-III/SCCmecXI/ST1945 (four spa-t843 and seven spa-t1535). All mecC-MRSA carried blaZ-SCCmecXI and etd2, were IEC-type-E, and belonged to the same PFGE pattern. The five MSSA were typed as spa-t2420/agr-I/ST133. Regarding humans, S. aureus was recovered from six samples (40%). The isolates were MSSA and were typed as spa-t002/agr-II, spa-t012/agr-III or spa-t822/agr-III and showed different IEC types (A, B, D and F). blaZ and erm(A) genes were detected, as well as cna and tst genes. As conclusion, red deer analyzed in this study are frequent carriers of mecC-MRSA CC130 (16.9%), they are characterized by few resistance and virulence determinants, and by the presence of IEC type-E. Deer could be a source of mecC-MRSA which could potentially be transmitted to other animals, or even to humans. Copyright © 2015 Elsevier B.V. All rights reserved.

Environmental methicillin-resistant Staphylococcus aureus in a veterinary teaching hospital during a nonoutbreak period.

PubMed

Hoet, Armando E; Johnson, Amanda; Nava-Hoet, Rocio C; Bateman, Shane; Hillier, Andrew; Dyce, John; Gebreyes, Wondwossen A; Wittum, Thomas E

2011-06-01

Concurrent to reports of zoonotic and nosocomial transmission of methicillin-resistant Staphylococcus aureus (MRSA) in veterinary settings, recent evidence indicates that the environment in veterinary hospitals may be a potential source of MRSA. The present report is a cross-sectional study to determine the prevalence of MRSA on specific human and animal contact surfaces at a large veterinary hospital during a nonoutbreak period. A total of 156 samples were collected using Swiffers(®) or premoistened swabs from the small animal, equine, and food animal sections. MRSA was isolated and identified by pre-enrichment culture and standard microbiology procedures, including growth on Mueller-Hinton agar supplemented with NaCl and oxacillin, and by detection of the mecA gene. Staphylococcal chromosome cassette mec (SCCmec) typing and pulsed-field gel electrophoresis profile were also determined. MRSA was detected in 12% (19/157) of the hospital environments sampled. The prevalence of MRSA in the small animal, equine, and food animal areas were 16%, 4%, and 0%, respectively. Sixteen of the MRSA isolates from the small animal section were classified as USA100, SCCmec type II, two of which had pulsed-field gel electrophoresis pattern that does not conform to any known type. The one isolate obtained from the equine section was classified as USA500, SCCmec type IV. The molecular epidemiological analysis revealed a very diverse population of MRSA isolates circulating in the hospital; however, in some instances, multiple locations/surfaces, not directly associated, had the same MRSA clone. No significant difference was observed between animal and human contact surfaces in regard to prevalence and type of isolates. Surfaces touched by multiple people (doors) and patients (carts) were frequently contaminated with MRSA. The results from this study indicate that MRSA is present in the environment even during nonoutbreak periods. This study also identified specific surfaces in a veterinary environment that need to be targeted when designing and executing infection control programs.

Environmental Methicillin-Resistant Staphylococcus aureus in a Veterinary Teaching Hospital During a Nonoutbreak Period

PubMed Central

Johnson, Amanda; Nava-Hoet, Rocio C.; Bateman, Shane; Hillier, Andrew; Dyce, John; Gebreyes, Wondwossen A.; Wittum, Thomas E.

2011-01-01

Abstract Concurrent to reports of zoonotic and nosocomial transmission of methicillin-resistant Staphylococcus aureus (MRSA) in veterinary settings, recent evidence indicates that the environment in veterinary hospitals may be a potential source of MRSA. The present report is a cross-sectional study to determine the prevalence of MRSA on specific human and animal contact surfaces at a large veterinary hospital during a nonoutbreak period. A total of 156 samples were collected using Swiffers® or premoistened swabs from the small animal, equine, and food animal sections. MRSA was isolated and identified by pre-enrichment culture and standard microbiology procedures, including growth on Mueller-Hinton agar supplemented with NaCl and oxacillin, and by detection of the mecA gene. Staphylococcal chromosome cassette mec (SCCmec) typing and pulsed-field gel electrophoresis profile were also determined. MRSA was detected in 12% (19/157) of the hospital environments sampled. The prevalence of MRSA in the small animal, equine, and food animal areas were 16%, 4%, and 0%, respectively. Sixteen of the MRSA isolates from the small animal section were classified as USA100, SCCmec type II, two of which had pulsed-field gel electrophoresis pattern that does not conform to any known type. The one isolate obtained from the equine section was classified as USA500, SCCmec type IV. The molecular epidemiological analysis revealed a very diverse population of MRSA isolates circulating in the hospital; however, in some instances, multiple locations/surfaces, not directly associated, had the same MRSA clone. No significant difference was observed between animal and human contact surfaces in regard to prevalence and type of isolates. Surfaces touched by multiple people (doors) and patients (carts) were frequently contaminated with MRSA. The results from this study indicate that MRSA is present in the environment even during nonoutbreak periods. This study also identified specific surfaces in a veterinary environment that need to be targeted when designing and executing infection control programs. PMID:21417926

Molecular investigation of Staphylococcus aureus isolated from the patients, personnel, air and environment of an ICU in a hospital in Tehran.

PubMed

Mirzaii, Mehdi; Emaneini, Mohammad; Jabalameli, Fereshteh; Halimi, Shahnaz; Taherikalani, Morovat

2015-01-01

The aim of this study was to determine the prevalence and characteristics of Staphylococcus aureus isolates from the patients, staff, air and environments of an ICU in a hospital in Tehran. During this study, 37 S. aureus isolates were collected and analyzed via the spa typing method. Of the 37 S. aureus isolates, 35 (94%) were methicillin resistant (MRSA), 28 (76%) were identified as SCCmec types III or IIIA, four (10%) were identified as SCCmec types I or IA and three (8%) were identified a SCCmec type IV. All of the MRSA isolates were resistant to oxacillin and contained mecA. The isolates were all spa typed and found to comprise 11 spa types, including t7688, t7689, and t7789, which have not previously been reported. The spa type t7688 was isolated from the hands of two ICU personnel. The spa type t7689 was observed among five isolates from the air and the environment. The spa type t7789 was observed among three isolates from the patients, ventilators and the air. The majority of the isolates (43%) belonged to spa types t030 and t037. Our results revealed that MRSA strains that were isolated from the air, the environment of the ICU and the patients who were colonized or infected with MRSA often exhibited the same spa and SCCmec types. These results also reveal that the isolates from the patients and environment were usually indistinguishable. Copyright © 2014 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Change in genotype of methicillin-resistant Staphylococcus aureus (MRSA) affects the antibiogram of hospital-acquired MRSA.

PubMed

Harada, Dai; Nakaminami, Hidemasa; Miyajima, Eri; Sugiyama, Taku; Sasai, Nao; Kitamura, Yoshinobu; Tamura, Taku; Kawakubo, Takashi; Noguchi, Norihisa

2018-07-01

Recently, the dissemination of community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) into hospitals has frequently been reported worldwide. Hospital-acquired MRSA (HA-MRSA) strains exhibit high-level resistance to multiple antimicrobial agents, whereas CA-MRSA strains are usually susceptible to non-β-lactams. Thus, it is predicted that the antibiogram of the HA-MRSA population would change along with the change in genotype of MRSA. Here, we investigated the changes in the MRSA population along with the MRSA antibiogram in a hospital between 2010 and 2016. Staphylococcal cassette chromosome (SCC) mec typing showed that the predominant HA-MRSA strains in the hospital dramatically changed from SCCmec type II, which is the major type of HA-MRSA, to SCCmec type IV, which is the major type of CA-MRSA. Multilocus sequence typing revealed that the predominant SCCmec type IV strain was a clonal complex (CC) 8 clone, which is mainly found among CA-MRSA. Furthermore, the CC1-SCCmec type IV (CC1-IV) clone significantly increased. Both the CC8-IV and CC1-IV clones exhibited high antimicrobial susceptibility. The antibiogram change of the HA-MRSA population was consistent with the antimicrobial susceptibilities and increased prevalence of the CC8-IV and CC1-IV clones. Our data reveal that the change in the genotypes of MRSA strains could impact the antibiogram of HA-MRSA population. Copyright © 2018 Japanese Society of Chemotherapy and The Japanese Association for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Genome comparisons of two Taiwanese community-associated methicillin-resistant Staphylococcus aureus ST59 clones support the multi-origin theory of CA-MRSA.

PubMed

Feng, Ye; Chen, Hsiu-Ling; Chen, Chih-Jung; Chen, Chyi-Liang; Chiu, Cheng-Hsun

2017-10-01

Sequence type (ST) 59 is an epidemic lineage of community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) in Asia. Two ST59 clones are prevalent in Taiwan: the Taiwan clone (TW) causes severe infections, whereas the Asian-Pacific clone (AP) is usually commensal. In this study, we sequenced the genome and transcriptome of the representative strains of these two clones and found their differences to focus on three mobile genetic elements: TW carries SCCmec Type V T , Panton-Valentine leucocidin (PVL)-encoding prophage ΦSa2, whereas AP carries SCCmec Type IV and staphylokinase (SAK)-encoding prophage ΦSa3. The anti-virulent role of SAK was confirmed using murine skin and bloodstream infection models. ΦSa3 usually integrates into the hlb gene, but in AP was found to be integrated at the genomic island νSaβ. The mutation of the attB site "TGTATCCAAACTGG" to "TGTATCCGAATTGG" led to a failure in the integration of ΦSa3 in hlb, prompting atypical integration at other sites. The sak gene possessed remarkably different patterns of distribution among the different STs of S. aureus. We conclude that the atypical integration of ΦSa3 may help S. aureus adapt to the human host habitat and that the subsequent loss of ΦSa3 contributes toward the development of a virulent CA-MRSA lineage for wider horizontal transmission. Copyright © 2017 Elsevier B.V. All rights reserved.

Prevalence of vancomycin-intermediate Staphylococcus aureus (VISA) and heterogeneous VISA among methicillin-resistant S. aureus with high vancomycin minimal inhibitory concentrations in Taiwan: A multicenter surveillance study, 2012-2013.

PubMed

Huang, Sung-Hsi; Chen, Yee-Chun; Chuang, Yin-Ching; Chiu, Sheng-Kang; Fung, Chang-Phone; Lu, Po-Liang; Wang, Lih-Shinn; Wu, Tsu-Lan; Wang, Jann-Tay

2016-10-01

Intermediate-resistance and heteroresistance to vancomycin in methicillin-resistant Staphylococcus aureus (MRSA) is reported worldwide. A surveillance study in 2003 showed that the prevalence rates of vancomycin-intermediate S. aureus (VISA) and heterogeneous VISA (hVISA) in Taiwan were 0.2% and 0.7%, respectively. This study aimed to investigate the updated prevalence of VISA and hVISA in Taiwan. MRSA isolates from sterile sites with minimal inhibitory concentrations (MICs) of 1 μg/mL or more to vancomycin were collected from 15 participating hospitals in Taiwan. Enrolled MRSA isolates were submitted to antimicrobial susceptibility testing, staphylococcal cassette chromosome mec (SCCmec) element typing, and multilocus sequence typing. Isolates with vancomycin MIC of 1 μg/mL or 2 μg/mL were screened for vancomycin heterogeneous resistance by Etest glycopeptide-resistance detection (GRD). Those with positive GRD screening results were then analyzed by modified population analysis profiling-area under the curve method for confirmation of vancomycin heteroresistance. Between 2012 and 2013, a total of 622 MRSA isolates from sterile sites with vancomycin MIC of 1 μg/mL or more were studied. The prevalence rates of hVISA and VISA among these isolates were 10.0% and 2.7%, respectively. The hVISA prevalence increased significantly compared to that in 2003. Compared with vancomycin-susceptible S. aureus, hVISA and VISA isolates were less susceptible to ciprofloxacin, clindamycin, daptomycin, gentamicin, rifampin, and trimethoprim/sulfamethoxazole, and are thus, more likely to have SCCmec II or III element. A twofold increase in either vancomycin or teicoplanin MIC doubled the probability of being hVISA. Growing hVISA prevalence was highly suspected. Longitudinal surveillance of this phenomenon and monitoring of its clinical impact are necessary. Copyright © 2015. Published by Elsevier B.V.

Multiple-locus variable number of tandem repeats fingerprinting (MLVF) and virulence factor analysis of methicillin resistant Staphylococcus aureus SCCmec type III.

PubMed

Emaneini, Mohammad; Jabalameli, Leila; Iman-Eini, Hossein; Aligholi, Marzieh; Ghasemi, Amir; Nakhjavani, Farrokh Akbari; Taherikalani, Morovat; Khoramian, Babak; Asadollahi, Parisa; Jabalameli, Fereshteh

2011-01-01

Methicillin resistant Staphylococcus aureus (MRSA), particularly strains with type III staphylococcal cassette chromosome mec (SCCmec), represent a serious human pathogen in Tehran, Iran. The disease-causing capability depends on their ability to produce a wide variety of virulent factors. The prevalence of exotoxin genes and multiple-locus variable number of tandem repeats fingerprinting (MLVF) profile among MRSA isolates, from patients in Tehran, was evaluated by PCR and Multiplex-PCR. The MLVF typing of 144 MRSA isolates with type III SCCmec produced 5 different MLVF types. Generally, 97.2% (140/144) of all the isolates were positive for at least one of the tested exotoxin genes. The most prevalent genes were hld, found in 87.5% (126/144) of the isolates followed by lukE-lukD and hla found in 72.9% (105/144) and 70.1% (101/144) of the isolates, respectively. The tst gene, belonging to MLVF types I, IV and V, was found among three of the isolates from blood and wound samples. The sea gene was detected in 58.3% (84/144) of the isolates and the sed and see genes were found in one isolate with MLVF type V. The coexistence of genes was observed in the 87.5% (126/144) of the isolates. The rate of coexistence of hld with lukE-lukD, hla with lukE-lukD and sea with lukE-lukD were 66.7% (96/144), 44.4% (64/144) and 44.4% (64/144), respectively. The present study demonstrated that MRSA strains with type III SCCmec show different MLVF patterns and exotoxin profiles.

Methicillin-Resistant Staphylococcus aureus Ocular Infection in Taiwan

PubMed Central

Kang, Yu-Chuan; Hsiao, Ching-Hsi; Yeh, Lung-Kun; Ma, David H.K.; Chen, Phil Y.F.; Lin, Hsin-Chiung; Tan, Hsin-Yuan; Chen, Hung-Chi; Chen, Shin-Yi; Huang, Yhu-Chering

2015-01-01

Abstract Methicillin-resistant Staphylococcus aureus (MRSA) infection is an important public health issue. This observational study aimed to characterize clinical features, antibiotic susceptibility, and genotypes of ocular infections caused by MRSA based on the clinical and molecular definitions of community-associated (CA) and healthcare-associated (HA) strains. Fifty-nine patients with culture-proven S aureus ocular infection were enrolled from January 1, 2010 to December 31, 2011 at Chang Gung Memorial Hospital, Taiwan. Antibiotic susceptibility was verified using disk diffusion/E test. For characterization, staphylococcal cassette chromosome mec (SCCmec), pulsed-field gel electrophoresis (PFGE), multilocus sequence type (MLST), and Panton–Valentine leukocidin (PVL) gene, were performed. MRSA isolates from the patients with HA factors were classified as clinically defined HA-MRSA, and those carrying SCCmec type I to III as molecularly defined HA-MRSA. Thirty-four patients with MRSA ocular infection were identified. The most common clone of CA-MRSA and HA-MRSA isolates was ST59/PFGE type D/SCCmec IV,VT/PVL (+) (n = 12) and CC 239/PFGE type A/SCCmec III, IIIA/PVL(−) (n = 10), respectively. All the 11 patients with molecularly defined HA-MRSA infections and 50% of the 22 patients with molecularly defined CA-MRSA infections were found to have HA factors (P = .005). CA-MRSA tended to cause lid infections, whereas HA-MRSA tended to cause corneal infections. Contrary to HA-MRSA isolates, nearly all the CA-MRSA isolates were susceptible to trimethoprim/sulfamethoxazole and fluoroquinolones under either clinical or molecular classifications. In Taiwan, CA-MRSA isolates exhibited considerably higher susceptibility to fluoroquinolones when compared with HA-MRSA isolates. A strong correlation was observed between the HA factors and molecularly defined HA-MRSA isolates. PMID:26496268

Molecular characteristics of methicillin-resistant Staphylococcus aureus (MRSA) strains isolated from patients with bacteremia based on MLST, SCCmec, spa, and agr locus types analysis.

PubMed

Goudarzi, Mehdi; Seyedjavadi, Sima Sadat; Nasiri, Mohammad Javad; Goudarzi, Hossein; Sajadi Nia, Raheleh; Dabiri, Hossein

2017-03-01

The widespread emergence of methicillin resistant Staphylococcus aureus, as a common cause of nosocomial infections, is becoming a serious concern in global public health. The objective of the present study was to investigate antimicrobial susceptibility pattern, frequency of virulence genes and molecular characteristics of methicillin-resistant Staphylococcus aureus strains isolated from patients with bacteremia. A total of 128 methicillin-resistant Staphylococcus aureus isolates were collected during February 2015 to January 2016. In vitro antimicrobial susceptibility of the isolates was assessed using the disk diffusion method. Conventional PCR was performed for the detection of adhesion (can, bbp, ebp, fnbB, fnbA, clfB, clfA) and toxin (etb, eta, pvl, tst) encoding genes, determining the agr type, SCCmec, MLST and spa typing of the isolates. All the methicillin-resistant Staphylococcus aureus isolates were found to be sensitive to linezolid, teicoplanin, and vancomycin. Resistance to the tested antibiotics varied from 97.7% for penicillin to 24.2% for mupirocin. The rate of multi drug resistance (MDR) in the present study was 97.7%. The most commonly detected toxin and adhesion genes were tst (58.6%), and clfB (100%), respectively. The majority of SCCmec III isolates were found in agr group I while SCCmec IV and II isolates were distributed among agr group III. Multilocus Sequence Typing (MLST) of the MRSA isolates showed five different sequence types: ST239 (43%), ST22 (39.8%), ST585 (10.9%), ST45 (3.9%) and ST240 (2.3%). All of the pvl positive strains belonged to ST22-SCCmec IV/t790 clone and were MDR. Among different 7 spa types, the most common were t790 (27.3%), t037 (21.9%), and t030 (14.1%). spa types t016, t924 and spa type t383 were reported for the first time from Asia and Iran, respectively. It was shown that spa types circulating in the studied hospitals varied which support the need to perform future surveillance studies in order to understand methicillin-resistant Staphylococcus aureus distribution and thus more effective infection control. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Molecular Epidemiology of the Highly Virulent ST93 Australian Community Staphylococcus aureus Strain

PubMed Central

Coombs, Geoffrey W.; Goering, Richard V.; Chua, Kyra Y. L.; Monecke, Stefan; Howden, Benjamin P.; Stinear, Timothy P.; Ehricht, Ralf; O’Brien, Frances G.; Christiansen, Keryn J.

2012-01-01

In Australia the PVL - positive ST93-IV [2B], colloquially known as “Queensland CA-MRSA” has become the dominant CA-MRSA clone. First described in the early 2000s, ST93-IV [2B] is associated with skin and severe invasive infections including necrotizing pneumonia. A singleton by multilocus sequence typing (MLST) eBURST analysis ST93 is distinct from other S aureus clones. To determine if the increased prevalence of ST93-IV [2B] is due to the widespread transmission of a single strain of ST93-IV [2B] the genetic relatedness of 58 S. aureus ST93 isolated throughout Australia over an extended period were studied in detail using a variety of molecular methods including pulsed-field gel electrophoresis, spa typing, MLST, microarray DNA, SCCmec typing and dru typing. Identification of the phage harbouring the lukS-PV/lukF-PV Panton Valentine leucocidin genes, detection of allelic variations in lukS-PV/lukF-PV, and quantification of LukF-PV expression was also performed. Although ST93-IV [2B] is known to have an apparent enhanced clinical virulence, the isolates harboured few known virulence determinants. All PVL-positive isolates carried the PVL-encoding phage ΦSa2USA and the lukS-PV/lukF-PV genes had the same R variant SNP profile. The isolates produced similar expression levels of LukF-PV. Although multiple rearrangements of the spa sequence have occurred, the core genome in ST93 is very stable. The emergence of ST93-MRSA is due to independent acquisitions of different dru-defined type IV and type V SCCmec elements in several spa-defined ST93-MSSA backgrounds. Rearrangement of the spa sequence in ST93-MRSA has subsequently occurred in some of these strains. Although multiple ST93-MRSA strains were characterised, little genetic diversity was identified for most isolates, with PVL-positive ST93-IVa [2B]-t202-dt10 predominant across Australia. Whether ST93-IVa [2B] t202-dt10 arose from one PVL-positive ST93-MSSA-t202, or by independent acquisitions of SCCmec-IVa [2B]-dt10 into multiple PVL-positive ST93-MSSA-t202 strains is not known. PMID:22900085

Antimicrobial susceptibilities and population structure of Staphylococcus epidermidis associated with ovine mastitis.

PubMed

Onni, Toniangelo; Sanna, Giovanna; Larsen, Jesper; Tola, Sebastiana

2011-02-24

Intramammary infections are a serious problem for dairy sheep farms, and Staphylococcus epidermidis is one of the main etiological agents of ovine mastitis. In this work, 131 S. epidermidis isolates, collected from 2201 dairy Sarda sheep belonging to 14 flocks with high somatic cell count scores, were studied. The flocks were located in diverse geographical areas of Sardinia, Italy. The aim of study was to assess the susceptibility of isolates to 13 antimicrobial agents, many of which are frequently used in mastitis therapy. Oxacillin was used for detecting methicillin-resistant S. epidermidis (MRSE) by disk diffusion test. Thirty-eight percent of the isolates (n=50) were resistant to penicillin, 7.6% (n=10) were resistant to tetracycline, and 2.3% (n=3) were resistant to both penicillin and tetracycline (PTRSE). Two isolates were resistant to five antimicrobials including methicillin. Analysis of staphylococcal cassette chromosome mec (SCCmec) elements showed that both MRSE isolates harbored SCCmec type IVa. Based on pulsed-field gel electrophoresis (PFGE) typing by SmaI macrorestriction, S. epidermidis isolates were grouped into four clusters at 75% similarity level. The two multi-drug resistant MRSE isolates displayed distinct PFGE patters. This study indicates that S. epidermidis isolates from sheep milk samples may accumulate resistance markers for different antimicrobial agents. Furthermore, the occurrence of PTRSE and MRSE suggests to adopt adequate hygienic measures when handling animals with intramammary infections, in order to prevent spreading PTRSE and MRSE strains to humans through direct contact and/or consumption of contaminated food. Copyright © 2010 Elsevier B.V. All rights reserved.

Increase of genetic diversity and clonal replacement of epidemic methicillin-resistant Staphylococcus aureus strains in South-East Austria.

PubMed

Zarfel, Gernot; Luxner, Josefa; Folli, Bettina; Leitner, Eva; Feierl, Gebhard; Kittinger, Clemens; Grisold, Andrea

2016-07-01

Spa-typing and microarray techniques were used to study epidemiological changes in methicillin-resistant Staphylococcus aureus (MRSA) in South-East Austria. The population structure of 327 MRSA isolated between 2002 and 2012 was investigated. MRSA was assigned to 58 different spa types and 14 different MLST CC (multilocus sequence type clonal complexes); in particular, between 2007 and 2012, an increasing diversity in MRSA clones could be observed. The most abundant clonal complex was CC5. On the respective SCCmec cassettes, the CC5 isolates differed clearly within this decade and CC5/SCCmecI, the South German MRSA, predominant in 2002, was replaced by CC5/SCCmecII, the Rhine-Hesse MRSA in 2012. Whereas in many European countries MLST CC22-MRSA (EMRSA 15, the Barnim epidemic MRSA) is predominant, this clone occurred in Austria nearly 10 years later than in neighbouring countries. CC45, the Berlin EMRSA, epidemic in Germany, was only sporadically found in South-East Austria. The Irish ST8-MRSA-II represented by spa-type t190 was frequently found in 2002 and 2007, but disappeared in 2012. Our results demonstrate clonal replacement of MRSA clones within the last years in Austria. Ongoing surveillance is warranted for detection of changes within the MRSA population. © FEMS 2016.

Antimicrobial Resistance and Molecular Characteristics of Methicillin-Resistant Staphylococcus aureus Isolates from Child Patients of High-Risk Wards in Shenzhen, China.

PubMed

Qin, Yang; Wen, Feiqiu; Zheng, Yuejie; Zhao, Ruizhen; Hu, Qinghua; Zhang, Renli

2017-09-25

Methicillin-resistant Staphylococcus aureus (MRSA) strains are responsible for high rates of mortality and thus pose a substantial burden to public health worldwide. Here, we investigated the antimicrobial susceptibility and molecular characteristics of MRSA isolated from child patients at Shenzhen Children's Hospital. We characterized 140 MRSA strains through antimicrobial susceptibility testing. We further performed spa typing, multilocus sequence typing (MLST), staphylococcal cassette chromosome mec (SCCmec) analysis, pvl gene analysis, and pulsed-field gel electrophoresis (PFGE). The analyzed MRSA strains were found to be sensitive to most non-β-lactam antimicrobial agents. Sequence type (ST) 59 was found to be the most common MLST lineage (54.3%). Most MRSA isolates belonged to the SCCmec IV (64.3%) and V (22.8%) types. The MRSA-ST59-SCCmec IV-t437 clone was the most predominant strain that infected 28.6% of all patients studied. Moreover, 50.7% of MRSA isolates were found to be pvl-positive. We report preliminary data on the prevalence and distribution of MRSA genotypes in Shenzhen Children's Hospital. We characterized MRSA colonization dynamics in child patients in China, and our findings can serve as the basis for the development of strategies to prevent MRSA infection and transmission.

Current methodologies on genotyping for nosocomial pathogen methicillin-resistant Staphylococcus aureus (MRSA).

PubMed

Miao, Jian; Chen, Lequn; Wang, Jingwen; Wang, Wenxin; Chen, Dingqiang; Li, Lin; Li, Bing; Deng, Yang; Xu, Zhenbo

2017-06-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a common pathogen in hospitals and the community. As the rapid spread and wide distribution of antimicrobial resistance (such as MRSA), treatment for infectious diseases caused by microorganisms has become a vital threat. Thus, early identification and genotyping are essential for further therapeutic treatment and the control of rapid expansion of MRSA. In combination with applications and data feedbacks, this review focused on the currently available molecular-based assays on their utility and performance for rapid typing of MRSA, especially on effective molecular-based methods. Besides, a common mobile element SCCmec and prevalence of HA-MRSA, LA-MRSA and CA-MRSA were introduced in this review in order to provide a more complete profile of MRSA. Copyright © 2017 Elsevier Ltd. All rights reserved.

Molecular epidemiology of coagulase-negative bloodstream isolates: detection of Staphylococcus epidermidis ST2, ST7 and linezolid-resistant ST23.

PubMed

Martínez-Meléndez, Adrián; Morfín-Otero, Rayo; Villarreal-Treviño, Licet; Camacho-Ortíz, Adrián; González-González, Gloria; Llaca-Díaz, Jorge; Rodríguez-Noriega, Eduardo; Garza-González, Elvira

2016-01-01

The mechanisms contributing to persistence of coagulase-negative staphylococci are diverse; to better understanding of their dynamics, the characterization of nosocomial isolates is needed. Our aim was to characterize phenotypic and molecular characteristics of Staphylococcus epidermidis and Staphylococcus haemolyticus human blood isolates from two tertiary care hospitals in Mexico, the Hospital Universitario in Monterrey and the Hospital Civil in Guadalajara. Antimicrobial susceptibility was determined. Biofilm formation was assessed by crystal violet staining. Detection of the ica operon and Staphylococcal Cassette Chromosome mec typing were performed by PCR. Clonal relatedness was determined by Pulsed-fiel gel electrophoresis and Multi locus sequence typing. Methicillin-resistance was 85.5% and 93.2% for S. epidermidis and S. haemolyticus, respectively. Both species showed resistance >70% to norfloxacin, clindamycin, levofloxacin, trimethoprim/sulfamethoxazole, and erythromycin. Three S. epidermidis and two S. haemolyticus isolates were linezolid-resistant (one isolate of each species was cfr+). Most isolates of both species were strong biofilm producers (92.8% of S. epidermidis and 72.9% of S. haemolyticus). The ica operon was amplified in 36 (43.4%) S. epidermidis isolates. SCCmec type IV was found in 47.2% of the S. epidermidis isolates and SCCmec type V in 14.5% of S. haemolyticus isolates. No clonal relatedness was found in either species. Resistance to clindamycin, levofloxacin, erythromycin, oxacillin, and cefoxitin was associated with biofilm production for both species (p<0.05). A G2576T mutation in 23S rRNA gene was detected in an S. haemolyticus linezolid-resistant isolate. All linezolid-resistant S. epidermidis isolates belonged to ST23; isolate with SCCmec type IV belonged to ST7, and isolate with SCCmec type III belonged to ST2. This is the first report of ST7 in Mexico. There was a high genetic diversity in both species, though both species shared characteristics that may contibute to virulence. Copyright © 2016 Elsevier Editora Ltda. All rights reserved.

Spreading of genes encoding enterotoxins, haemolysins, adhesin and biofilm among methicillin resistant Staphylococcus aureus strains with staphylococcal cassette chromosome mec type IIIA isolated from burn patients.

PubMed

Motallebi, Mitra; Jabalameli, Fereshteh; Asadollahi, Kheirollah; Taherikalani, Morovat; Emaneini, Mohammad

2016-08-01

The emergence of antibiotic-resistant Staphylococcus aureus in particular methicillin-resistant S. aureus (MRSA) is an important concern in burn medical centers either in Iran or worldwide. A total of 128 S. aureus isolates were collected from wound infection of burn patients during June 2013 to June 2014. Multiplex-polymerase chain reaction (MPCR) assay was performed for the characterization of the staphylococcal cassette chromosome mec (SCCmec). Genes encoding virulence factors and biofilm were targeted by PCR. Of 128 S. aureus isolates, 77 (60.1%) isolates were MRSA. Fifty four (70.1%) isolates were identified as SCCmec type IIIA. The most frequently detected toxin genes among MRSA isolates with SCCmec type IIIA were sea (64.1%) and hla (51.8%). The rate of coexistence of sea with hla and sea with hla and hlb was 37% and12.9%, respectively. The sec, eta, tst, pvl, hla and hlb genes were not detected in any of the MRSA isolates. The most prevalent genes encoding biofilm was eno, found in 61.1% of isolates, followed by fib and icaA found in 48.1% and 38.8% of the isolates, respectively. The rate of coexistence of fib + eno + icaA + icaD and fib + eno was 20.3% and 9.2%, respectively. The ebps gene was not detected in any of the isolates. In conclusion, our study indicated that the sea, hla, fib and icaA were most frequent genes encoding virulence factors among MRSA with SCCmec type IIIA isolated from burn wound infection. Moreover, the results of this study shows that the rate of coexistence of genes encoding different virulence factor were high. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Livestock-Associated, Multidrug-Resistant, Methicillin-Resistant Staphylococcus aureus Clonal Complex 97 Lineage Spreading in Dairy Cattle and Pigs in Italy

PubMed Central

Feltrin, Fabiola; Alba, Patricia; Kraushaar, Britta; Ianzano, Angela; Argudín, María Angeles; Di Matteo, Paola; Porrero, María Concepción; Aarestrup, Frank M.; Butaye, Patrick; Franco, Alessia

2015-01-01

Pandemic methicillin-resistant Staphylococcus aureus (MRSA) clonal complex 97 (CC97) lineages originated from livestock-to-human host jumps. In recent years, CC97 has become one of the major MRSA lineages detected in Italian farmed animals. The aim of this study was to characterize and analyze differences in MRSA and methicillin-susceptible S. aureus (MSSA) mainly of swine and bovine origins. Forty-seven CC97 isolates, 35 MRSA isolates, and 6 MSSA isolates from different Italian pig and cattle holdings; 5 pig MRSA isolates from Germany; and 1 human MSSA isolate from Spain were characterized by macrorestriction pulsed-field gel electrophoresis (PFGE) analysis, multilocus sequence typing (MLST), spa typing, staphylococcal cassette chromosome mec (SCCmec) typing, and antimicrobial resistance pattern analysis. Virulence and resistance genes were investigated by PCR and microarray analysis. Most of the isolates were of SCCmec type V (SCCmec V), except for two German MRSA isolates (SCCmec III). Five main clusters were identified by PFGE, with the German isolates (clusters I and II) showing 60.5% similarity with the Italian isolates, most of which (68.1%) grouped into cluster V. All CC97 isolates were Panton-Valentine leukocidin (PVL) negative, and a few (n = 7) tested positive for sak or scn. All MRSA isolates were multidrug resistant (MDR), and the main features were erm(B)- or erm(C)-mediated (n = 18) macrolide-lincosamide-streptogramin B resistance, vga(A)-mediated (n = 37) pleuromutilin resistance, fluoroquinolone resistance (n = 33), tet(K) in 32/37 tet(M)-positive isolates, and blaZ in almost all MRSA isolates. Few host-associated differences were detected among CC97 MRSA isolates: their extensive MDR nature in both pigs and dairy cattle may be a consequence of a spillback from pigs of a MRSA lineage that originated in cattle as MSSA and needs further investigation. Measures should be implemented at the farm level to prevent spillover to humans in intensive farming areas. PMID:26590279

Community-acquired necrotizing pneumonia caused by methicillin-resistant Staphylococcus aureus ST30-SCCmecIVc-spat019-PVL positive in San Antonio de Areco, Argentina.

PubMed

Fernandez, Silvina; Murzicato, Sofía; Sandoval, Orlando; Fernández-Canigia, Liliana; Mollerach, Marta

2015-01-01

Community-acquired methicillin-resistant Staphylococcus aureus is the first cause of skin and soft tissue infections, but can also produce severe diseases such as bacteremia, osteomyelitis and necrotizing pneumonia. Some S. aureus lineages have been described in cases of necrotizing pneumonia worldwide, usually in young, previously healthy patients. In this work, we describe a fatal case of necrotizing pneumonia due to community-acquired methicillin-resistant S. aureus clone ST30-SCCmecIVc-spat019-PVL positive in an immunocompetent adult patient. Copyright © 2014 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

Chromosomal Targeting by the Type III-A CRISPR-Cas System Can Reshape Genomes in Staphylococcus aureus

PubMed Central

Guan, Jing; Wang, Wanying

2017-01-01

ABSTRACT CRISPR-Cas (clustered regularly interspaced short palindromic repeat [CRISPR]-CRISPR-associated protein [Cas]) systems can provide protection against invading genetic elements by using CRISPR RNAs (crRNAs) as a guide to locate and degrade the target DNA. CRISPR-Cas systems have been classified into two classes and five types according to the content of cas genes. Previous studies have indicated that CRISPR-Cas systems can avoid viral infection and block plasmid transfer. Here we show that chromosomal targeting by the Staphylococcus aureus type III-A CRISPR-Cas system can drive large-scale genome deletion and alteration within integrated staphylococcal cassette chromosome mec (SCCmec). The targeting activity of the CRISPR-Cas system is associated with the complementarity between crRNAs and protospacers, and 10- to 13-nucleotide truncations of spacers partially block CRISPR attack and more than 13-nucleotide truncation can fully abolish targeting, suggesting that a minimal length is required to license cleavage. Avoiding base pairings in the upstream region of protospacers is also necessary for CRISPR targeting. Successive trinucleotide complementarity between the 5′ tag of crRNAs and protospacers can disrupt targeting. Our findings reveal that type III-A CRISPR-Cas systems can modulate bacterial genome stability and may serve as a high-efficiency tool for deleting resistance or virulence genes in bacteria. IMPORTANCE Staphylococcus aureus is a pathogen that can cause a wide range of infections in humans. Studies have suggested that CRISPR-Cas systems can drive the loss of integrated mobile genetic elements (MGEs) by chromosomal targeting. Here we demonstrate that CRISPR-mediated cleavage contributes to the partial deletion of integrated SCCmec in methicillin-resistant S. aureus (MRSA), which provides a strategy for the treatment of MRSA infections. The spacer within artificial CRISPR arrays should contain more than 25 nucleotides for immunity, and consecutive trinucleotide pairings between a selected target and the 5′ tag of crRNA can block targeting. These findings add to our understanding of the molecular mechanisms of the type III-A CRISPR-Cas system and provide a novel strategy for the exploitation of engineered CRISPR immunity against integrated MGEs in bacteria for clinical and industrial applications. PMID:29152580

Detection of Epidemic USA300 Community-Associated Methicillin-Resistant Staphylococcus aureus Strains by Use of a Single Allele-Specific PCR Assay Targeting a Novel Polymorphism of Staphylococcus aureus pbp3

PubMed Central

Chadwick, Sean G.; Prasad, Aditya; Smith, W. Lamar; Mordechai, Eli; Adelson, Martin E.

2013-01-01

In recent years, the dramatic increase in community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) infections has become a significant health care challenge. Early detection of CA-MRSA is important because of its increased virulence associated with the arginine catabolic mobile element (ACME), Panton-Valentine leukocidin (PVL), and other toxins that may contribute to disease severity. In particular, the USA300 epidemic clone has emerged and now represents the cause of as much as 98% of CA-MRSA skin and soft tissue infections in the United States. Current diagnostic assays used to identify CA-MRSA strains are based on complex multiplex PCRs targeting the staphylococcal cassette chromosome mec (SCCmec) DNA junction, a multitude of genes, and noncoding DNA fragments or on a number of lengthy sequence-typing methods. Here, two nucleotide polymorphisms, G88A and G2047A, that were found to be in strict linkage disequilibrium in the S. aureus penicillin-binding protein 3 (pbp3) gene were also found to be highly associated with the USA300 clone of CA-MRSA. Clinical isolates that contained this pbp3 allele were also positive for the presence of SCCmec type IV, the ACME, and the PVL toxin gene and matched the t008 or t121 molecular spa types, which are associated specifically with the USA300 CA-MRSA clone. A single allele-specific PCR targeting the G88A polymorphism was developed and was found to be 100% sensitive and specific for the detection of USA300 CA-MRSA and 91.5% sensitive and 100% specific for the detection of all CA-MRSA isolates in this study. PMID:23698534

Dissemination of Methicillin-Resistant Staphylococcus aureus (MRSA), USA300 Sequence Type 8 Lineage in Latin-America

PubMed Central

Reyes, Jinnethe; Rincón, Sandra; Díaz, Lorena; Panesso, Diana; Contreras, Germán A.; Zurita, Jeannete; Carrillo, Carlos; Rizzi, Adele; Guzmán, Manuel; Adachi, Javier; Chowdhury, Shahreen; Murray, Barbara E.; Arias, Cesar A.

2009-01-01

Background Methicillin-resistant Staphylococus aureus (MRSA) is an important nosocomial and community-associated (CA) pathogen. Recently, a variant of the MRSA USA300 clone emerged and disseminated in South-America causing important clinical problems. Methods S. aureus isolates were prospectively collected (2006 to 2008) from 32 tertiary hospitals in Colombia, Ecuador, Peru, and Venezuela. MRSA isolates were subjected to antimicrobial susceptibility testing, pulsed field gel electrophoresis (PFGE), and categorized as healthcare-associated (HA)-like or CA-like clones based on genotypic characteristics and detection of genes encoding the Panton-Valentine leukocidin (PVL) and staphylococcal cassette mec (SCCmec) IV. Additionally, MLST of representative isolates of each major CA-MRSA pulsotype, and detection of USA300-associated toxins and the arcA gene were performed in all isolates categorized as CA-MRSA. Results A total of 1570 S. aureus were included; 651 were MRSA (41%), with the highest rates of MRSA isolation in Peru (62%), and lowest in Venezuela (26%) and 71%, 27%, and 2% were classified as HA-like, CA-like, and non-CA/HA-like clones, respectively. Only 9 MRSA isolates were confirmed to have reduced susceptibility to glycopeptides (GISA phenotype). The most common pulsotype (designated ComA) amongst the CA-like MRSA strains was found in 96% of isolates with the majority (81%) having ≤6 bands difference with the USA300-0114 strain. Representative isolates of this clone were ST8 but, unlike the USA300-0114 strain, they harbored a different SCCmec IV subtype and lacked arcA (an indicator of the arginine catabolic mobile element (ACME)). Conclusion A variant CA-MRSA USA300 clone has now become established in South America and, in some countries, is endemic in hospital settings. PMID:19911971

Origin, evolution, and global transmission of community-acquired Staphylococcus aureus ST8

PubMed Central

Strauß, Lena; Alabi, Abraham; Breurec, Sebastien; Coombs, Geoffrey; Egyir, Beverly; Larsen, Anders Rhod; Laurent, Frederic; Monecke, Stefan; Peters, Georg; Skov, Robert; Strommenger, Birgit; Schaumburg, Frieder

2017-01-01

USA300 is a pandemic clonal lineage of hypervirulent, community-acquired, methicillin-resistant Staphylococcus aureus (CA-MRSA) with specific molecular characteristics. Despite its high clinical relevance, the evolutionary origin of USA300 remained unclear. We used comparative genomics of 224 temporal and spatial diverse S. aureus isolates of multilocus sequence type (ST) 8 to reconstruct the molecular evolution and global dissemination of ST8, including USA300. Analyses of core SNP diversity and accessory genome variations showed that the ancestor of all ST8 S. aureus most likely emerged in Central Europe in the mid-19th century. From here, ST8 was exported to North America in the early 20th century and progressively acquired the USA300 characteristics Panton–Valentine leukocidin (PVL), SCCmec IVa, the arginine catabolic mobile element (ACME), and a specific mutation in capsular polysaccharide gene cap5E. Although the PVL-encoding phage ϕSa2USA was introduced into the ST8 background only once, various SCCmec types were introduced to ST8 at different times and places. Starting from North America, USA300 spread globally, including Africa. African USA300 isolates have aberrant spa-types (t112, t121) and form a monophyletic group within the clade of North American USA300. Large parts of ST8 methicillin-susceptible S. aureus (MSSA) isolated in Africa represent a symplesiomorphic group of ST8 (i.e., a group representing the characteristics of the ancestor), which are rarely found in other world regions. Isolates previously discussed as USA300 ancestors, including USA500 and a “historic” CA-MRSA from Western Australia, were shown to be only distantly related to recent USA300 clones. PMID:29158405

[Characterization of methicillin- and linezolid-resistant Staphylococcus epidermidis and S. haemolyticus strains in a Spanish hospital].

PubMed

Lozano, Carmen; Aspiroz, Carmen; Gómez-Sanz, Elena; Tirado, Gabriel; Fortuño, Blanca; Zarazaga, Myriam; Torres, Carmen

2013-03-01

Linezolid resistance is mainly due to mutations in the 23S rRNA target. The aim of this study was to characterize linezolid and methicillin resistant Staphylococcus epidermidis (SE-LM(R)) and S. haemolyticus (SH-LM(R)) strains detected in a Spanish hospital. SE-LM(R) and SH-LM(R) strains obtained in the period June 2009-August 2011 in a second level hospital were recorded along with the epidemiological characteristics of the patients. These strains were typed, and their resistance, phenotype, genotype and the factors determining their virulence were analysed. Linezolid resistance was explained by the presence of G2603T mutation (23S rRNA) and aminoacid changes in L3 and L4 ribosomal proteins. The 25 SE-LM(R) strains belonged to sequence type ST2, presented SCCmec typeIII, and two different PFGE patterns. The two SH-LM(R) strains showed non-typeable SCCmec. SE-LM(R) strains harboured the resistance genes aac(6')-aph(2"), and dfrS1. SH-LM(R) strains contained these genes and the gene erm(C). No lincomycin resistance mechanism was identified in SE-LM(R) strains regardless of showing lincomycin resistance and diminished susceptibility to clindamycin. Linezolid resistance is of concern in hospitals, and requires continued vigilance. Several linezolid resistance mechanisms (mutation in 23S RNAr and amino acid changes in L3 and L4) were identified in this study. Copyright © 2012 Elsevier España, S.L. All rights reserved.

Spread of Epidemic MRSA-ST5-IV Clone Encoding PVL as a Major Cause of Community Onset Staphylococcal Infections in Argentinean Children

PubMed Central

Sola, Claudia; Egea, Ana L.; Moyano, Alejandro J.; Garnero, Analia; Kevric, Ines; Culasso, Catalina; Vindel, Ana; Lopardo, Horacio; Bocco, José L.

2012-01-01

Background Community-associated methicillin-resistant Staphylococcus aureus-(CA-MRSA) strains have emerged in Argentina. We investigated the clinical and molecular evolution of community-onset MRSA infections (CO-MRSA) in children of Córdoba, Argentina, 2005–2008. Additionally, data from 2007 were compared with the epidemiology of these infections in other regions of the country. Methodology/Principal Findings Two datasets were used: i) lab-based prospective surveillance of CA-MRSA isolates from 3 Córdoba pediatric hospitals-(CBAH1-H3) in 2007–2008 (compared to previously published data of 2005) and ii) a sampling of CO-MRSA from a study involving both, healthcare-associated community-onset-(HACO) infections in children with risk-factors for healthcare-associated infections-(HRFs), and CA-MRSA infections in patients without HRFs detected in multiple centers of Argentina in 2007. Molecular typing was performed on the CA-MRSA-(n: 99) isolates from the CBAH1-H3-dataset and on the HACO-MRSA-(n: 51) and CA-MRSA-(n: 213) isolates from other regions. Between 2005–2008, the annual proportion of CA-MRSA/CA-S. aureus in Córdoba hospitals increased from 25% to 49%, P<0.01. Total CA-MRSA infections increased 3.6 fold-(5.1 to 18.6 cases/100,000 annual-visits, P<0.0001), associated with an important increase of invasive CA-MRSA infections-(8.5 fold). In all regions analyzed, a single genotype prevailed in both CA-MRSA (82%) and HACO-MRSA(57%), which showed pulsed-field-gel electrophoresis-(PFGE)-type-“I”, sequence-type-5-(ST5), SCCmec-type-IVa, spa-t311, and was positive for PVL. The second clone, pulsotype-N/ST30/CC30/SCCmecIVc/t019/PVL+, accounted for 11.5% of total CA-MRSA infections. Importantly, the first 4 isolates of Argentina belonging to South American-USA300 clone-(USA300/ST8/CC8/SCCmecIVc/t008/PVL+/ACME−) were detected. We also demonstrated that a HA-MRSA clone-(pulsotype-C/ST100/CC5) caused 2% and 10% of CA-MRSA and HACO-MRSA infections respectively and was associated with a SCCmec type closely related to SCCmecIV(2B&5). Conclusions/Significance The dissemination of epidemic MRSA clone, ST5-IV-PVL+ was the main cause of increasing staphylococcal community-onset infections in Argentinean children (2003–2008), conversely to other countries. The predominance of this clone, which has capacity to express the h-VISA phenotype, in healthcare-associated community-onset cases suggests that it has infiltrated into hospital-settings. PMID:22291965

Retrospective study of necrotizing fasciitis and characterization of its associated Methicillin-resistant Staphylococcus aureus in Taiwan

PubMed Central

2011-01-01

Background Methicillin-resistant Staphylococcus aureus (MRSA) has emerged as a prevalent pathogen of necrotizing fasciitis (NF) in Taiwan. A four-year NF cases and clinical and genetic differences between hospital acquired (HA)- and community-acquired (CA)-MRSA infection and isolates were investigated. Methods A retrospective study of 247 NF cases in 2004-2008 and antimicrobial susceptibilities, staphylococcal chromosomal cassette mec (SCCmec) types, pulsed field gel electrophoresis (PFGE) patterns, virulence factors, and multilocus sequence typing (MLST) of 16 NF-associated MRSA in 2008 were also evaluated. Results In 247 cases, 42 microbial species were identified. S. aureus was the major prevalent pathogen and MRSA accounted for 19.8% of NF cases. Most patients had many coexisting medical conditions, including diabetes mellitus, followed by hypertension, chronic azotemia and chronic hepatic disease in order of decreasing prevalence. Patients with MRSA infection tended to have more severe clinical outcomes in terms of amputation rate (p < 0.05) and reconstruction rate (p = 0.001) than those with methicillin-sensitive S. aureus or non-S. aureus infection. NF patients infected by HA-MRSA had a significantly higher amputation rate, comorbidity, C-reactive protein level, and involvement of lower extremity than those infected by CA-MRSA. In addition to over 90% of MRSA resistant to erythromycin and clindamycin, HA-MRSA was more resistant than CA-MRSA to trimethoprim-sulfamethoxazole (45.8% vs. 4%). ST59/pulsotype C/SCCmec IV and ST239/pulsotype A/SCCmec III isolates were the most prevalent CA- and HA-MRSA, respectively in 16 isolates obtained in 2008. In contrast to the gene for γ-hemolysin found in all MRSA, the gene for Panton-Valentine leukocidin was only identified in ST59 MRSA isolates. Other three virulence factors TSST-1, ETA, and ETB were occasionally identified in MRSA isolates tested. Conclusion NF patients with MRSA infection, especially HA-MRSA infection, had more severe clinical outcomes than those infected by other microbial. The prevalent NF-associated MRSA clones in Taiwan differed distinctly from the most predominant NF-associated USA300 CA-MRSA clone in the USA. Initial empiric antimicrobials with a broad coverage for MRSA should be considered in the treatment of NF patients in an endemic area. PMID:22040231

Retrospective study of necrotizing fasciitis and characterization of its associated methicillin-resistant Staphylococcus aureus in Taiwan.

PubMed

Changchien, Chih-Hsuan; Chen, Ying-Ying; Chen, Shu-Wun; Chen, Wan-Lin; Tsay, Jwu-Guh; Chu, Chishih

2011-10-31

Methicillin-resistant Staphylococcus aureus (MRSA) has emerged as a prevalent pathogen of necrotizing fasciitis (NF) in Taiwan. A four-year NF cases and clinical and genetic differences between hospital acquired (HA)- and community-acquired (CA)-MRSA infection and isolates were investigated. A retrospective study of 247 NF cases in 2004-2008 and antimicrobial susceptibilities, staphylococcal chromosomal cassette mec (SCCmec) types, pulsed field gel electrophoresis (PFGE) patterns, virulence factors, and multilocus sequence typing (MLST) of 16 NF-associated MRSA in 2008 were also evaluated. In 247 cases, 42 microbial species were identified. S. aureus was the major prevalent pathogen and MRSA accounted for 19.8% of NF cases. Most patients had many coexisting medical conditions, including diabetes mellitus, followed by hypertension, chronic azotemia and chronic hepatic disease in order of decreasing prevalence. Patients with MRSA infection tended to have more severe clinical outcomes in terms of amputation rate (p < 0.05) and reconstruction rate (p = 0.001) than those with methicillin-sensitive S. aureus or non-S. aureus infection. NF patients infected by HA-MRSA had a significantly higher amputation rate, comorbidity, C-reactive protein level, and involvement of lower extremity than those infected by CA-MRSA. In addition to over 90% of MRSA resistant to erythromycin and clindamycin, HA-MRSA was more resistant than CA-MRSA to trimethoprim-sulfamethoxazole (45.8% vs. 4%). ST59/pulsotype C/SCCmec IV and ST239/pulsotype A/SCCmec III isolates were the most prevalent CA- and HA-MRSA, respectively in 16 isolates obtained in 2008. In contrast to the gene for γ-hemolysin found in all MRSA, the gene for Panton-Valentine leukocidin was only identified in ST59 MRSA isolates. Other three virulence factors TSST-1, ETA, and ETB were occasionally identified in MRSA isolates tested. NF patients with MRSA infection, especially HA-MRSA infection, had more severe clinical outcomes than those infected by other microbial. The prevalent NF-associated MRSA clones in Taiwan differed distinctly from the most predominant NF-associated USA300 CA-MRSA clone in the USA. Initial empiric antimicrobials with a broad coverage for MRSA should be considered in the treatment of NF patients in an endemic area.

Methicillin-resistant Staphylococcus aureus in hospitalized patients from the Bolivian Chaco.

PubMed

Bartoloni, Alessandro; Riccobono, Eleonora; Magnelli, Donata; Villagran, Ana Liz; Di Maggio, Tiziana; Mantella, Antonia; Sennati, Samanta; Revollo, Carmen; Strohmeyer, Marianne; Giani, Tommaso; Pallecchi, Lucia; Rossolini, Gian Maria

2015-01-01

Information is lacking on the methicillin-resistant Staphylococcus aureus (MRSA) clonal lineages circulating in Bolivia. We investigated the prevalence and molecular epidemiology of S. aureus colonization in hospitalized patients from the Bolivian Chaco, and compared their features with those of the few clinical isolates available from that setting. S. aureus nasal/inguinal colonization was investigated in 280 inpatients from eight hospitals in two point prevalence surveys (2012, n=90; 2013, n=190). Molecular characterization included genotyping (spa typing, multilocus sequence typing, and pulsed-field gel electrophoresis), detection of virulence genes, and SCCmec typing. Forty-one inpatients (14.6%) were S. aureus nasal/inguinal carriers, of whom five were colonized by MRSA (1.8%). MRSA isolates mostly belonged to spa-type t701, harboured SCCmec IVc, and were negative for Panton-Valentine leukocidin (PVL) genes. However, a USA300-related isolate was also detected, which showed the characteristics of the USA300 Latin American variant (USA300-LV; i.e., ST8, spa-type t008, SCCmec IVc, presence of PVL genes, absence of arcA). Notably, all the available MRSA clinical isolates (n=5, collected during 2011-2013) were also identified as USA300-LV. Overall, MRSA colonization in inpatients from the Bolivian Chaco was low. However, USA300-LV-related isolates were detected in colonization and infections, emphasizing the importance of implementing control measures to limit their further dissemination in this resource-limited area. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Methicillin-resistant Staphylococcus aureus in public transportation vehicles (buses): another piece to the epidemiologic puzzle.

PubMed

Lutz, Jonathan K; van Balen, Joany; Crawford, John Mac; Wilkins, John R; Lee, Jiyoung; Nava-Hoet, Rocio C; Hoet, Armando E

2014-12-01

Little is known about the occurrence and epidemiology of methicillin-resistant Staphylococcus aureus (MRSA) in public transportation in the United States. This research sought to determine the background prevalence and phenotypic and genotypic characteristics of MRSA strains circulating on buses from a large, metropolitan transportation agency. Electrostatic wipes were used to collect 237 surface samples from 40 buses randomly selected from July-October 2010. Six samples were collected from each bus immediately postservice and before any cleaning and disinfection. Positive isolates were analyzed for antibiotic resistance, staphylococcal cassette chromosome mec (SCCmec) type, and pulsed-field gel electrophoresis; and potential epidemiologic factors were examined. Of the buses, 68% (27/40) were contaminated with S aureus, and 63% (25/40) were contaminated with MRSA. Seats and seat rails were the surfaces most frequently contaminated, followed by the back door and stanchions. Most (62.9%) of the MRSA isolates were classified as community-associated MRSA clones (SCCmec type IV), and 22.9% were health care-associated MRSA clones (SCCmec type II). Of the MRSA strains, 65% (5/20) were multidrug resistant. MRSA was frequently isolated from commonly touched surfaces in buses serving both hospital and community routes. Phenotypic and genotypic analysis demonstrated that buses may be effective mixing vessels for MRSA strains of both community and health care-associated origin. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

High proportions of Staphylococcus epidermidis in dental caries harbor multiple classes of antibiotics resistance, significantly increase inflammatory interleukins in dental pulps.

PubMed

Devang Divakar, Darshan; Muzaheed; Aldeyab, Sultan Salem; Alfawaz, Sara A; AlKheraif, Abdulaziz Abdullah; Ahmed Khan, Aftab

2017-08-01

Staphylococcus epidermidis is one of most prevalent in dental caries or dental pulp which has the capability of horizontal genetic transfer between different bacterial species in the oropharynx, suggesting that it may evolve with the dissemination of resistant determinants, This study was performed to molecularly characterize and differentiate S. epidermidis isolated from dental caries and healthy individual. Also, two important cytokines in inflammation were assayed caused due to S. epidermidis of health and dental caries sources. Dental caries strains were more resistant with high MIC 50 and MIC 90 value. These isolates also showed the presence of mecA gene and another virulence gene i. e sea and seb comparatively more than healthy individual isolates. SCCmec types, III and IV was more prevalent in dental caries isolates where an as healthy individual was more non-typable. Additionally, the quantity of IL-1β and IL-8 caused due to dental caries isolates was seen more which indicate dental caries isolates are able to induce. This study showed that S. epidermidis a normal flora of oropharyngeal are more diverse to those strains which cause dental caries. S. epidermidis owns a prodigious genetic plasticity that permits to obtain, lose or regulate genetic elements that provide compensations to improve its colonization in the host. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Review of Staphylococcal Cassette Chromosome mec (SCCmec) Types in Coagulase-Negative Staphylococci (CoNS) Species.

PubMed

Saber, Huda; Jasni, Azmiza Syawani; Jamaluddin, Tengku Zetty Maztura Tengku; Ibrahim, Rosni

2017-10-01

Coagulase-negative staphylococci (CoNS) are considered low pathogenic organisms. However, they are progressively causing more serious infections with time because they have adapted well to various antibiotics owing to their ability to form biofilms. Few studies have been conducted on CoNS in both, hospital and community-acquired settings, especially in Malaysia. Thus, it is important to study their species and gene distributions. A mobile genetic element, staphylococcal cassette chromosome mec (SCC mec ), plays an important role in staphylococci pathogenesis. Among CoNS, SCC mec has been studied less frequently than Staphylococcus aureus (coagulase-positive staphylococci). A recent study (8) conducted in Malaysia successfully detected SCC mec type I to VIII as well as several new combination patterns in CoNS species, particularly Staphylococcus epidermidis . However, data are still limited, and further research is warranted. This paper provides a review on SCC mec types among CoNS species.

New patterns of methicillin-resistant Staphylococcus aureus (MRSA) clones, community-associated MRSA genotypes behave like healthcare-associated MRSA genotypes within hospitals, Argentina.

PubMed

Egea, Ana L; Gagetti, Paula; Lamberghini, Ricardo; Faccone, Diego; Lucero, Celeste; Vindel, Ana; Tosoroni, Dario; Garnero, Analía; Saka, Hector A; Galas, Marcelo; Bocco, José L; Corso, Alejandra; Sola, Claudia

2014-11-01

Methicillin-resistant Staphylococcus aureus (MRSA) burden is increasing worldwide in hospitals [healthcare-associated (HA)-MRSA] and in communities [community-associated (CA)-MRSA]. However, the impact of CA-MRSA within hospitals remains limited, particularly in Latin America. A countrywide representative survey of S. aureus infections was performed in Argentina by analyzing 591 clinical isolates from 66 hospitals in a prospective cross-sectional, multicenter study (Nov-2009). This work involved healthcare-onset infections-(HAHO, >48 hospitalization hours) and community-onset (CO) infections [including both, infections (HACO) in patients with healthcare-associated risk-factors (HRFs) and infections (CACO) in those without HRFs]. MRSA strains were genetically typed as CA-MRSA and HA-MRSA genotypes (CA-MRSAG and HA-MRSAG) by SCCmec- and spa-typing, PFGE, MLST and virulence genes profile by PCR. Considering all isolates, 63% were from CO-infections and 55% were MRSA [39% CA-MRSAG and 16% HA-MRSAG]. A significantly higher MRSA proportion among CO- than HAHO-S. aureus infections was detected (58% vs 49%); mainly in children (62% vs 43%). The CA-MRSAG/HA-MRSAG have accounted for 16%/33% of HAHO-, 39%/13% of HACO- and 60.5%/0% of CACO-infections. Regarding the epidemiological associations identified in multivariate models for patients with healthcare-onset CA-MRSAG infections, CA-MRSAG behave like HA-MRSAG within hospitals but children were the highest risk group for healthcare-onset CA-MRSAG infections. Most CA-MRSAG belonged to two major clones: PFGE-type N-ST30-SCCmecIVc-t019-PVL(+) and PFGE-type I-ST5-IV-SCCmecIVa-t311-PVL(+) (45% each). The ST5-IV-PVL(+)/ST30-IV-PVL(+) clones have caused 31%/33% of all infections, 20%/4% of HAHO-, 43%/23% of HACO- and 35%/60% of CACO- infections, with significant differences by age groups (children/adults) and geographical regions. Importantly, an isolate belonging to USA300-0114-(ST8-SCCmecIVa-spat008-PVL(+)-ACME(+)) was detected for the first time in Argentina. Most of HA-MRSAG (66%) were related to the Cordobes/Chilean clone-(PFGE-type A-ST5-SCCmecI-t149) causing 18% of all infections (47% of HAHO- and 13% of HACO-infections). Results strongly suggest that the CA-MRSA clone ST5-IV-PVL(+) has begun to spread within hospitals, replacing the traditional Cordobes/Chilean-HA-MRSA clone ST5-I-PVL(-), mainly in children. Importantly, a growing MRSA reservoir in the community was associated with spreading of two CA-MRSA clones: ST5-IV-PVL(+), mainly in children with HRFs, and ST30-IV-PVL(+) in adults without HRFs. This is the first nationwide study in Argentina providing information about the molecular and clinical epidemiology of CA-MRSA, particularly within hospitals, which is essential for designing effective control measures in this country and worldwide. Copyright © 2014 Elsevier GmbH. All rights reserved.

A very early-branching Staphylococcus aureus lineage lacking the carotenoid pigment staphyloxanthin.

PubMed

Holt, Deborah C; Holden, Matthew T G; Tong, Steven Y C; Castillo-Ramirez, Santiago; Clarke, Louise; Quail, Michael A; Currie, Bart J; Parkhill, Julian; Bentley, Stephen D; Feil, Edward J; Giffard, Philip M

2011-01-01

Here we discuss the evolution of the northern Australian Staphylococcus aureus isolate MSHR1132 genome. MSHR1132 belongs to the divergent clonal complex 75 lineage. The average nucleotide divergence between orthologous genes in MSHR1132 and typical S. aureus is approximately sevenfold greater than the maximum divergence observed in this species to date. MSHR1132 has a small accessory genome, which includes the well-characterized genomic islands, νSAα and νSaβ, suggesting that these elements were acquired well before the expansion of the typical S. aureus population. Other mobile elements show mosaic structure (the prophage ϕSa3) or evidence of recent acquisition from a typical S. aureus lineage (SCCmec, ICE6013 and plasmid pMSHR1132). There are two differences in gene repertoire compared with typical S. aureus that may be significant clues as to the genetic basis underlying the successful emergence of S. aureus as a pathogen. First, MSHR1132 lacks the genes for production of staphyloxanthin, the carotenoid pigment that confers upon S. aureus its characteristic golden color and protects against oxidative stress. The lack of pigment was demonstrated in 126 of 126 CC75 isolates. Second, a mobile clustered regularly interspaced short palindromic repeat (CRISPR) element is inserted into orfX of MSHR1132. Although common in other staphylococcal species, these elements are very rare within S. aureus and may impact accessory genome acquisition. The CRISPR spacer sequences reveal a history of attempted invasion by known S. aureus mobile elements. There is a case for the creation of a new taxon to accommodate this and related isolates.

The emerging ST8 methicillin-resistant Staphylococcus aureus clone in the community in Japan: associated infections, genetic diversity, and comparative genomics.

PubMed

Iwao, Yasuhisa; Ishii, Rumiko; Tomita, Yusuke; Shibuya, Yasuhiro; Takano, Tomomi; Hung, Wei-chun; Higuchi, Wataru; Isobe, Hirokazu; Nishiyama, Akihito; Yano, Mio; Matsumoto, Tetsuya; Ogata, Kikuyo; Okubo, Takeshi; Khokhlova, Olga; Ho, Pak-leung; Yamamoto, Tatsuo

2015-07-01

Community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) has become a major concern worldwide. In the United States, ST8 CA-MRSA with SCCmecIVa (USA300) has been predominant, affecting the entire United States. In this study, we investigated Japanese ST8 CA-MRSA with new SCCmecIV1 (designated ST8 CA-MRSA/J), which has emerged in Japan since 2003. Regarding community spread and infections, ST8 CA-MRSA/J spread in 16.2-34.4% as a major genotype in the community in Japan, and was associated with skin and soft tissue infections (SSTIs), colitis, and invasive infections (sepsis, epidural abscesses, and necrotizing pneumonia), including influenza prodrome cases and athlete infections, similar to USA300. It spread to even public transport and Hong Kong through a Japanese family. Regarding genetic diversity, ST8 CA-MRSA/J included ST and spa variants and was classified into at least three pulsed-field gel electrophoresis types, ST8 Jα to γ. Of those, ST8 Jβ was associated with severe invasive infections. As for genomics, ST8 CA-MRSA/J showed high similarities to USA300, but with marked diversity in accessory genes; e.g., ST8 CA-MRSA/J possessed enhanced cytolytic peptide genes of CA-MRSA, but lacked the Panton-Valentine leukocidin phage and arginine catabolic mobile element, unlike USA300. The unique features of ST8 CA-MRSA/J included a novel mosaic SaPI (designated SaPIj50) carrying the toxic shock syndrome toxin-1 gene with high expression; the evolution included salvage (through recombination) of hospital-acquired MRSA virulence. The data suggest that ST8 CA-MRSA/J has become a successful native clone in Japan, in association with not only SSTIs but also severe invasive infections (posing a threat), requiring attention.

The emerging ST8 methicillin-resistant Staphylococcus aureus clone in the community in Japan: associated infections, genetic diversity, and comparative genomics.

PubMed

Iwao, Yasuhisa; Ishii, Rumiko; Tomita, Yusuke; Shibuya, Yasuhiro; Takano, Tomomi; Hung, Wei-Chun; Higuchi, Wataru; Isobe, Hirokazu; Nishiyama, Akihito; Yano, Mio; Matsumoto, Tetsuya; Ogata, Kikuyo; Okubo, Takeshi; Khokhlova, Olga; Ho, Pak-Leung; Yamamoto, Tatsuo

2012-04-01

Community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) has become a major concern worldwide. In the United States, ST8 CA-MRSA with SCCmecIVa (USA300) has been predominant, affecting the entire United States. In this study, we investigated Japanese ST8 CA-MRSA with new SCCmecIVl (designated ST8 CA-MRSA/J), which has emerged in Japan since 2003. Regarding community spread and infections, ST8 CA-MRSA/J spread in 16.2-34.4% as a major genotype in the community in Japan, and was associated with skin and soft tissue infections (SSTIs), colitis, and invasive infections (sepsis, epidural abscesses, and necrotizing pneumonia), including influenza prodrome cases and athlete infections, similar to USA300. It spread to even public transport and Hong Kong through a Japanese family. Regarding genetic diversity, ST8 CA-MRSA/J included ST and spa variants and was classified into at least three pulsed-field gel electrophoresis types, ST8 Jα to γ. Of those, ST8 Jβ was associated with severe invasive infections. As for genomics, ST8 CA-MRSA/J showed high similarities to USA300, but with marked diversity in accessory genes; e.g., ST8 CA-MRSA/J possessed enhanced cytolytic peptide genes of CA-MRSA, but lacked the Panton-Valentine leukocidin phage and arginine catabolic mobile element, unlike USA300. The unique features of ST8 CA-MRSA/J included a novel mosaic SaPI (designated SaPIj50) carrying the toxic shock syndrome toxin-1 gene with high expression; the evolution included salvage (through recombination) of hospital-acquired MRSA virulence. The data suggest that ST8 CA-MRSA/J has become a successful native clone in Japan, in association with not only SSTIs but also severe invasive infections (posing a threat), requiring attention.

Identification of novel mazEF/pemIK family toxin-antitoxin loci and their distribution in the Staphylococcus genus.

PubMed

Bukowski, Michal; Hyz, Karolina; Janczak, Monika; Hydzik, Marcin; Dubin, Grzegorz; Wladyka, Benedykt

2017-10-18

The versatile roles of toxin-antitoxin (TA) systems in bacterial physiology and pathogenesis have been investigated for more than three decades. Diverse TA loci in Bacteria and Archaea have been identified in genome-wide studies. The advent of massive parallel sequencing has substantially expanded the number of known bacterial genomic sequences over the last 5 years. In staphylococci, this has translated into an impressive increase from a few tens to a several thousands of available genomes, which has allowed us for the re-evalution of prior conclusions. In this study, we analysed the distribution of mazEF/pemIK family TA system operons in available staphylococcal genomes and their prevalence in mobile genetic elements. 10 novel m azEF/pemIK homologues were identified, each with a corresponding toxin that plays a potentially different and undetermined physiological role. A detailed characterisation of these TA systems would be exceptionally useful. Of particular interest are those associated with an SCCmec mobile genetic element (responsible for multidrug resistance transmission) or representing the joint horizontal transfer of TA systems and determinants of vancomycin resistance from enterococci. The involvement of TA systems in maintaining mobile genetic elements and the associations between novel mazEF/pemIK loci and those which carry drug resistance genes highlight their potential medical importance.

Screening and characterization of Staphylococcus aureus from ophthalmology clinic surfaces: a proposed surveillance tool

PubMed Central

Reem, Rachel E.; Van Balen, Joany; Hoet, Armando E.; Cebulla, Colleen M.

2014-01-01

Purpose To screen environmental surfaces of an outpatient ophthalmic clinic for methicillin-susceptible and methicillin-resistant Staphylococcus aureus (MSSA and MRSA); to identify the most commonly contaminated surfaces; and to phenotype and genotype all collected isolates Design A single institution, one-year prospective environmental study Methods Commonly touched surfaces from examination rooms and common areas were targeted and sampled on a quarterly basis for one year. Samples were collected using electrostatic cloths and swabs. S. aureus was isolated using non-selective and selective media. Morphological characteristics and standard biological testing were used to confirm staphylococcal species. S. aureus isolates were phenotypically (Kirby-Bauer method) and genotypically characterized (mecA confirmation, SCCmec typing and pulsed-field gel electrophoresis). Dendrogram analysis was used to establish genetic relatedness between the isolates. Results Of 112 total samples, 27 (24%) and 5 (4%) were MSSA- and MRSA-positive, respectively. Both community-associated (SCCmec IV, USA300) and hospital-associated (SCCmec II, USA100) MRSA isolates were found. No single surface remained consistently positive with the same isolate over time and molecular analysis demonstrated high levels of diversity among isolates. Doorknobs, slit-lamp head/chinrests, and computer keyboards were frequently contaminated. Conclusions The proposed surveillance protocol successfully allowed the detection of both MSSA and MRSA contaminating important high-touch surfaces in a representative ophthalmology clinic. Frequently contaminated surfaces must be targeted for routine cleaning and disinfection as a there is a constant introduction of clones over time. Hence, other clinics may consider implementing and adapting surveillance tools, as the one here described, to help them control these important nosocomial pathogens. PMID:24412125

Prevalence and characterisation of Staphylococcus aureus causing community-acquired skin and soft tissue infections on Java and Bali, Indonesia.

PubMed

Santosaningsih, Dewi; Santoso, Sanarto; Setijowati, Nanik; Rasyid, Harun A; Budayanti, Nyoman S; Suata, Ketut; Widhyatmoko, Dicky B; Purwono, Priyo B; Kuntaman, Kuntaman; Damayanti, Damayanti; Prakoeswa, Cita R S; Laurens, Mitchell; van Nierop, Josephine W I; Nanninga, Geraldine L; Oudenes, Neline; de Regt, Michelle; Snijders, Susan V; Verbrugh, Henri A; Severin, Juliëtte A

2018-01-01

To define the role of Staphylococcus aureus in community settings among patients with skin and soft tissue infections (SSTI) in Indonesia. Staphylococcus aureus were cultured from anterior nares, throat and wounds of 567 ambulatory patients presenting with SSTI. The mecA gene and genes encoding Panton-Valentine leukocidin (PVL; lukF-PV and lukS-PV) and exfoliative toxin (ET; eta and etb) were determined by PCR. Clonal relatedness among methicillin-resistant S. aureus (MRSA) and PVL-positive S. aureus was analysed using multilocus variable-number tandem-repeat analysis (MLVA) typing, and multilocus sequence typing (MLST) for a subset of isolates. Staphylococcal cassette chromosome mec (SCCmec) was determined for all MRSA isolates. Moreover, determinants for S. aureus SSTI, and PVL/ET-positive vs PVL/ET-negative S. aureus were assessed. Staphylococcus aureus were isolated from SSTI wounds of 257 (45.3%) patients, eight (3.1%) of these were MRSA. Genes encoding PVL and ETs were detected in 21.8% and 17.5% of methicillin-susceptible S. aureus (MSSA), respectively. PVL-positive MRSA was not detected. Nasopharyngeal S. aureus carriage was an independent determinant for S. aureus SSTI (odds ratio [OR] 1.8). Primary skin infection (OR 5.4) and previous antibiotic therapy (OR 3.5) were associated with PVL-positive MSSA. Primary skin infection (OR 2.2) was the only factor associated with ET-positive MSSA. MLVA typing revealed two more prevalent MSSA clusters. One ST1-MRSA-SCCmec type IV isolate and a cluster of ST239-MRSA-SCCmec type III were found. Community-acquired SSTI in Indonesia was frequently caused by PVL-positive MSSA, and the hospital-associated ST239-MRSA may have spread from the hospital into the community. © 2017 John Wiley & Sons Ltd.

Genotyping of methicillin-resistant Staphylococcus aureus (MRSA) isolated from milk and dairy products in South Italy.

PubMed

Basanisi, M G; La Bella, G; Nobili, G; Franconieri, I; La Salandra, G

2017-04-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a pathogen emerging in hospitals as well as community and livestock. MRSA is a significant and costly public health concern because it may enter the human food chain and contaminate milk and dairy products causing foodborne illness. This study aimed to determine the occurrence and the characteristics of MRSA isolated from 3760 samples of milk and dairy products in a previous survey conducted in southern Italy during 2008-2014. Overall out of 484 S. aureus strains isolated, 40 (8.3%) were MRSA and were characterized by spa-typing, Multi-Locus Sequence Typing, SCCmec typing, Staphylococcal enterotoxins (SEs) genes, Panton-Valentine Leukocidin (PVL) genes and ability to form biofilm. The most frequently recovered STs were ST152 (t355-67.5%), followed by ST398 (t899, t108-25%), ST1 (t127-5%) and ST5 (t688-2.5%). All isolates harboured the SCCmec type V (92.5%) or IVa (25%). In one isolate (2.5%), ST398/t899, the SCCmec resulted not detected. Three isolates (7.5%) carried one or more enterotoxin encoding genes (one strain had seg, sei, sem, sen and seo genes; two strains had seh gene). The 50% of isolated strains harboured PVL-encoding genes. Molecular analysis for icaA and icaD genes showed: 72.5% icaA and icaD positive, 25% only icaD gene and one icaA and icaD negative. The detection of MRSA in food of animal origin is a potential health hazard, thus it is necessary monitoring of food-producing animals and improving hygiene standards in food practices in order to reduce the microbiological risk to minimum. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

A common variant of staphylococcal cassette chromosome mec type IVa in isolates from Copenhagen, Denmark, is not detected by the BD GeneOhm methicillin-resistant Staphylococcus aureus assay.

PubMed

Bartels, Mette Damkjaer; Boye, Kit; Rohde, Susanne Mie; Larsen, Anders Rhod; Torfs, Herbert; Bouchy, Peggy; Skov, Robert; Westh, Henrik

2009-05-01

Rapid tests for detection of methicillin-resistant Staphylococcus aureus (MRSA) carriage are important to limit the transmission of MRSA in the health care setting. We evaluated the performance of the BD GeneOhm MRSA real-time PCR assay using a diverse collection of MRSA isolates, mainly from Copenhagen, Denmark, but also including international isolates, e.g., USA100-1100. Pure cultures of 349 MRSA isolates representing variants of staphylococcal cassette chromosome mec (SCCmec) types I to V and 103 different staphylococcal protein A (spa) types were tested. In addition, 53 methicillin-susceptible Staphylococcus aureus isolates were included as negative controls. Forty-four MRSA isolates were undetectable; of these, 95% harbored SCCmec type IVa, and these included the most-common clone in Copenhagen, spa t024-sequence type 8-IVa. The false-negative MRSA isolates were tested with new primers (analyte-specific reagent [ASR] BD GeneOhm MRSA assay) supplied by Becton Dickinson (BD). The ASR BD GeneOhm MRSA assay detected 42 of the 44 isolates that were false negative in the BD GeneOhm MRSA assay. Combining the BD GeneOhm MRSA assay with the ASR BD GeneOhm MRSA assay greatly improved the results, with only two MRSA isolates being false negative. The BD GeneOhm MRSA assay alone is not adequate for MRSA detection in Copenhagen, Denmark, as more than one-third of our MRSA isolates would not be detected. We recommend that the BD GeneOhm MRSA assay be evaluated against the local MRSA diversity before being established as a standard assay, and due to the constant evolution of SCCmec cassettes, a continuous global surveillance is advisable in order to update the assay as necessary.

Livestock-Associated Methicillin Resistant and Methicillin Susceptible Staphylococcus aureus Sequence Type (CC)1 in European Farmed Animals: High Genetic Relatedness of Isolates from Italian Cattle Herds and Humans.

PubMed

Alba, Patricia; Feltrin, Fabiola; Cordaro, Gessica; Porrero, María Concepción; Kraushaar, Britta; Argudín, María Angeles; Nykäsenoja, Suvi; Monaco, Monica; Stegger, Marc; Aarestrup, Frank M; Butaye, Patrick; Franco, Alessia; Battisti, Antonio

2015-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) Sequence Type (ST)1, Clonal Complex(CC)1, SCCmec V is one of the major Livestock-Associated (LA-) lineages in pig farming industry in Italy and is associated with pigs in other European countries. Recently, it has been increasingly detected in Italian dairy cattle herds. The aim of this study was to analyse the differences between ST1 MRSA and methicillin-susceptible S. aureus (MSSA) from cattle and pig herds in Italy and Europe and human isolates. Sixty-tree animal isolates from different holdings and 20 human isolates were characterized by pulsed-field gel electrophoresis (PFGE), spa-typing, SCCmec typing, and by micro-array analysis for several virulence, antimicrobial resistance, and strain/host-specific marker genes. Three major PFGE clusters were detected. The bovine isolates shared a high (≥90% to 100%) similarity with human isolates and carried the same SCCmec type IVa. They often showed genetic features typical of human adaptation or present in human-associated CC1: Immune evasion cluster (IEC) genes sak and scn, or sea; sat and aphA3-mediated aminoglycoside resistance. Contrary, typical markers of porcine origin in Italy and Spain, like erm(A) mediated macrolide-lincosamide-streptograminB, and of vga(A)-mediated pleuromutilin resistance were always absent in human and bovine isolates. Most of ST(CC)1 MRSA from dairy cattle were multidrug-resistant and contained virulence and immunomodulatory genes associated with full capability of colonizing humans. As such, these strains may represent a greater human hazard than the porcine strains. The zoonotic capacity of CC1 LA-MRSA from livestock must be taken seriously and measures should be implemented at farm-level to prevent spill-over.

Prevalence of Staphylococcus aureus and Methicillin-Resistant Staphylococcus aureus in Retail Ready-to-Eat Foods in China

PubMed Central

Yang, Xiaojuan; Zhang, Jumei; Yu, Shubo; Wu, Qingping; Guo, Weipeng; Huang, Jiahui; Cai, Shuzhen

2016-01-01

Staphylococcus aureus, particularly methicillin-resistant S.aureus (MRSA), is a life-threatening pathogen in humans, and its presence in food is a public health concern. MRSA has been identified in foods in China, but little information is available regarding MRSA in ready-to-eat (RTE) foods. We aimed to investigate the prevalence of S. aureus and MRSA in Chinese retail RTE foods. All isolated S. aureus were tested for antimicrobial susceptibility, and MRSA isolates were further characterized by multilocus sequence typing (MLST) and staphylococcal cassette chromosome mec (SCCmec) typing. Of the 550 RTE foods collected from 2011 to 2014, 69 (12.5%) were positive for S. aureus. Contamination levels were mostly in the range of 0.3–10 most probable number (MPN)/g, with five samples exceeding 10 MPN/g. Of the 69 S. aureus isolates, seven were identified as MRSA by cefoxitin disc diffusion test. Six isolates were mecA-positive, while no mecC-positive isolates were identified. In total, 75.8% (47/62) of the methicillin-susceptible S. aureus isolates and all of the MRSA isolates were resistant to three or more antibiotics. Amongst the MRSA isolates, four were identified as community-acquired strains (ST59-MRSA-IVa (n = 2), ST338-MRSA-V, ST1-MRSA-V), while one was a livestock-associated strain (ST9, harboring an unreported SCCmec type 2C2). One novel sequence type was identified (ST3239), the SCCmec gene of which could not be typed. Overall, our findings showed that Chinese retail RTE foods are likely vehicles for transmission of multidrug-resistant S. aureus and MRSA lineages. This is a serious public health risk and highlights the need to implement good hygiene practices. PMID:27375562

Spreading of β-lactam resistance gene (mecA) and methicillin-resistant Staphylococcus aureus through municipal and swine slaughterhouse wastewaters.

PubMed

Wan, Min Tao; Chou, Chin Cheng

2014-11-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a potential zoonotic agent. Municipal wastewater treatment plants (WWTPs) can be reservoirs for MRSA dissemination. It is unclear, however, whether MRSA and its β-lactam resistance gene (mecA) can be spread from WWTPs that treat the wastewater of swine auction markets. The aims of the study were to compare (1) the abundance of the mecA gene in one municipal (M-) and one swine (S-) WWTP and (2) the genotypic and phenotypic characteristics of MRSA isolates from these two types of WWTPs. The concentrations of mecA gene from 96 wastewater samples were quantified using real-time quantitative polymerase chain reaction (real-time qPCR). One hundred and thirteen MRSA isolates were recovered and were characterized by antimicrobial susceptibility testing, minimum inhibitory concentrations (MICs), and staphylococcal cassette chromosome mec (SCCmec) typing. The mecA gene could be detected in all the wastewater samples. A high abundance of recovered mecA gene (2.6 × 10(1) to 1.9 × 10(4) gene copies μg(-1) of total DNA) in swine slaughterhouse wastewater implied a correspondingly high transferring/receiving potential. All MRSA isolates were multidrug resistant (MDR) and showed high MICs to different antimicrobials. The M-WWTP MRSA isolates harbored SCCmec II-IV and VII, whereas those from the S-WWTP harbored SCCmec V and IX. In conclusion, wastewater from swine slaughterhouses can make these slaughterhouses potential hotspots for the dissemination of mecA gene and MRSA, and the high MICs of MRSA from both WWTP origins may pose a health risk not only to workers but also to the general public. Copyright © 2014 Elsevier Ltd. All rights reserved.

Community-associated and healthcare-associated methicillin-resistant Staphylococcus aureus virulence toward Caenorhabditis elegans compared.

PubMed

Day, Shandra R; Moore, Christopher M; Kundzins, John R; Sifri, Costi D

2012-11-15

Community-associated (CA) methicillin-resistant Staphylococcus aureus (MRSA) strains have emerged as major human pathogens. CA-MRSA virulence appears to be distinct from healthcare-associated (HA) MRSA with several factors [α-hemolysin (Hla), Panton-Valentine leukocidin (PVL), α-type phenol soluble modulins (PSMα) and SCCmec IV] postulated to enhance virulence or fitness. Using the Caenorhabditis elegans infection model, we compared the virulence of clinical and laboratory isolates of CA-MRSA and HA-MRSA and explored the contribution of CA-MRSA associated virulence factors to nematode killing. All CA-MRSA strains were highly pathogenic to nematodes, while HA-MRSA strains demonstrated variable nematode killing. Nematode killing by isogenic mutants of hla or the loci for PVL, PSMα, PSMβ, PSMδ or SCCmec IV was not different than the parental strains. These results demonstrate that CA-MRSA is highly virulent, shows some strains of HA-MRSA are equally virulent toward nematodes and suggests CA-MRSA virulence in C. elegans is not linked to a single virulence factor.

Community-associated and healthcare-associated methicillin-resistant Staphylococcus aureus virulence toward Caenorhabditis elegans compared

PubMed Central

Day, Shandra R.; Moore, Christopher M.; Kundzins, John R.; Sifri, Costi D.

2012-01-01

Community-associated (CA) methicillin-resistant Staphylococcus aureus (MRSA) strains have emerged as major human pathogens. CA-MRSA virulence appears to be distinct from healthcare-associated (HA) MRSA with several factors [α-hemolysin (Hla), Panton-Valentine leukocidin (PVL), α-type phenol soluble modulins (PSMα) and SCCmec IV] postulated to enhance virulence or fitness. Using the Caenorhabditis elegans infection model, we compared the virulence of clinical and laboratory isolates of CA-MRSA and HA-MRSA and explored the contribution of CA-MRSA associated virulence factors to nematode killing. All CA-MRSA strains were highly pathogenic to nematodes, while HA-MRSA strains demonstrated variable nematode killing. Nematode killing by isogenic mutants of hla or the loci for PVL, PSMα, PSMβ, PSMδ or SCCmec IV was not different than the parental strains. These results demonstrate that CA-MRSA is highly virulent, shows some strains of HA-MRSA are equally virulent toward nematodes and suggests CA-MRSA virulence in C. elegans is not linked to a single virulence factor. PMID:23076331

Modulation of mecA Gene Expression by Essential Oil from Salvia sclarea and Synergism with Oxacillin in Methicillin Resistant Staphylococcus epidermidis Carrying Different Types of Staphylococcal Chromosomal Cassette mec

PubMed Central

Chovanová, Romana; Mikulášová, Mária; Vaverková, Štefánia

2016-01-01

The essential oil (EO) from Salvia sclarea was shown to increase the susceptibility of methicillin resistant Staphylococcus epidermidis (MRSE) isolates to oxacillin. The purpose of this study was to investigate the effect of EO from S. sclarea on expression of mecA gene of MRSE carrying different types of staphylococcal chromosomal cassette (SCCmec) and to evaluate potential synergistic effect of EO with oxacillin. Using real-time PCR we found that EO alone inhibited the expression of the resistant genes mecA, mecR1, and mecI and blaZ, blaR1, and blaI. The use of the combination of EO with oxacillin resulted in significantly inhibited expression of mecA gene in all tested strains with different types of SCCmec. Using time-kill assay and checkerboard assay we confirmed synergistic effect of EO from S. sclarea and oxacillin in MRSE. PMID:26880926

mec-associated dru typing in the epidemiological analysis of ST239 MRSA in Malaysia.

PubMed

Ghaznavi-Rad, E; Goering, R V; Nor Shamsudin, M; Weng, P L; Sekawi, Z; Tavakol, M; van Belkum, A; Neela, V

2011-11-01

The usefulness of mec-associated dru typing in the epidemiological analysis of methicillin-resistant Staphylococcus aureus (MRSA) isolated in Malaysia was investigated and compared with pulsed-field gel electrophoresis (PFGE), multilocus sequence typing (MLST), and spa and SCCmec typing. The isolates studied included all MRSA types in Malaysia. Multilocus sequence type ST188 and ST1 isolates were highly clonal by all typing methods. However, the dru typing of ST239 isolates produced the clearest discrimination between SCCmec IIIa and III isolates, yielding more subtypes than any other method. Evaluation of the discriminatory power for each method identified dru typing and PFGE as the most discriminatory, with Simpson's index of diversity (SID) values over 89%, including an isolate which was non-typeable by spa, but dru-typed as dt13j. The discriminatory ability of dru typing, especially with closely related MRSA ST239 strains (e.g., Brazilian and Hungarian), underscores its utility as a tool for the epidemiological investigation of MRSA.

Discriminatory Indices of Typing Methods for Epidemiologic Analysis of Contemporary Staphylococcus aureus Strains.

PubMed

Rodriguez, Marcela; Hogan, Patrick G; Satola, Sarah W; Crispell, Emily; Wylie, Todd; Gao, Hongyu; Sodergren, Erica; Weinstock, George M; Burnham, Carey-Ann D; Fritz, Stephanie A

2015-09-01

Historically, a number of typing methods have been evaluated for Staphylococcus aureus strain characterization. The emergence of contemporary strains of community-associated S. aureus, and the ensuing epidemic with a predominant strain type (USA300), necessitates re-evaluation of the discriminatory power of these typing methods for discerning molecular epidemiology and transmission dynamics, essential to investigations of hospital and community outbreaks. We compared the discriminatory index of 5 typing methods for contemporary S. aureus strain characterization. Children presenting to St. Louis Children's Hospital and community pediatric practices in St. Louis, Missouri (MO), with community-associated S. aureus infections were enrolled. Repetitive sequence-based PCR (repPCR), pulsed-field gel electrophoresis (PFGE), multilocus sequence typing (MLST), staphylococcal protein A (spa), and staphylococcal cassette chromosome (SCC) mec typing were performed on 200 S. aureus isolates. The discriminatory index of each method was calculated using the standard formula for this metric, where a value of 1 is highly discriminatory and a value of 0 is not discriminatory. Overall, we identified 26 distinct strain types by repPCR, 17 strain types by PFGE, 30 strain types by MLST, 68 strain types by spa typing, and 5 strain types by SCCmec typing. RepPCR had the highest discriminatory index (D) of all methods (D = 0.88), followed by spa typing (D = 0.87), MLST (D = 0.84), PFGE (D = 0.76), and SCCmec typing (D = 0.60). The method with the highest D among MRSA isolates was repPCR (D = 0.64) followed by spa typing (D = 0.45) and MLST (D = 0.44). The method with the highest D among MSSA isolates was spa typing (D = 0.98), followed by MLST (D = 0.93), repPCR (D = 0.92), and PFGE (D = 0.89). Among isolates designated USA300 by PFGE, repPCR was most discriminatory, with 10 distinct strain types identified (D = 0.63). We identified 45 MRSA isolates which were classified as identical by PFGE, MLST, spa typing, and SCCmec typing (USA300, ST8, t008, SCCmec IV, respectively); within this collection, there were 5 distinct strain types identified by repPCR. The typing methods yielded comparable discriminatory power for S. aureus characterization overall; when discriminating among USA300 isolates, repPCR retained the highest discriminatory power. This property is advantageous for investigations conducted in the era of contemporary S. aureus infections.

Discriminatory Indices of Typing Methods for Epidemiologic Analysis of Contemporary Staphylococcus aureus Strains

PubMed Central

Rodriguez, Marcela; Hogan, Patrick G.; Satola, Sarah W.; Crispell, Emily; Wylie, Todd; Gao, Hongyu; Sodergren, Erica; Weinstock, George M.; Burnham, Carey-Ann D.; Fritz, Stephanie A.

2015-01-01

Abstract Historically, a number of typing methods have been evaluated for Staphylococcus aureus strain characterization. The emergence of contemporary strains of community-associated S. aureus, and the ensuing epidemic with a predominant strain type (USA300), necessitates re-evaluation of the discriminatory power of these typing methods for discerning molecular epidemiology and transmission dynamics, essential to investigations of hospital and community outbreaks. We compared the discriminatory index of 5 typing methods for contemporary S. aureus strain characterization. Children presenting to St. Louis Children's Hospital and community pediatric practices in St. Louis, Missouri (MO), with community-associated S. aureus infections were enrolled. Repetitive sequence-based PCR (repPCR), pulsed-field gel electrophoresis (PFGE), multilocus sequence typing (MLST), staphylococcal protein A (spa), and staphylococcal cassette chromosome (SCC) mec typing were performed on 200 S. aureus isolates. The discriminatory index of each method was calculated using the standard formula for this metric, where a value of 1 is highly discriminatory and a value of 0 is not discriminatory. Overall, we identified 26 distinct strain types by repPCR, 17 strain types by PFGE, 30 strain types by MLST, 68 strain types by spa typing, and 5 strain types by SCCmec typing. RepPCR had the highest discriminatory index (D) of all methods (D = 0.88), followed by spa typing (D = 0.87), MLST (D = 0.84), PFGE (D = 0.76), and SCCmec typing (D = 0.60). The method with the highest D among MRSA isolates was repPCR (D = 0.64) followed by spa typing (D = 0.45) and MLST (D = 0.44). The method with the highest D among MSSA isolates was spa typing (D = 0.98), followed by MLST (D = 0.93), repPCR (D = 0.92), and PFGE (D = 0.89). Among isolates designated USA300 by PFGE, repPCR was most discriminatory, with 10 distinct strain types identified (D = 0.63). We identified 45 MRSA isolates which were classified as identical by PFGE, MLST, spa typing, and SCCmec typing (USA300, ST8, t008, SCCmec IV, respectively); within this collection, there were 5 distinct strain types identified by repPCR. The typing methods yielded comparable discriminatory power for S. aureus characterization overall; when discriminating among USA300 isolates, repPCR retained the highest discriminatory power. This property is advantageous for investigations conducted in the era of contemporary S. aureus infections. PMID:26376402

Environmental Staphylococcus aureus contamination in a Tunisian hospital.

PubMed

Gharsa, Haythem; Dziri, Raoudha; Klibi, Naouel; Chairat, Sarra; Lozano, Carmen; Torres, Carmen; Bellaaj, Ridha; Slama, Karim Ben

2016-12-01

One hundred hospital environment samples were obtained in 2012 in a Tunisian hospital and tested for Staphylococcus aureus recovery. Antimicrobial resistance profile and virulence gene content were determined. Multilocus-sequence-typing (MLST), spa-typing, agr-typing and SmaI-pulsed-field gel electrophoresis (PFGE) were performed. Two methicillin-resistant S. aureus (MRSA) isolates typed as: ST247-t052-SCCmecI-agrI were recovered from the intensive care unit (ICU). Ten samples contained methicillin-susceptible S. aureus (MSSA) and these samples were collected in different services, highlighting the presence of the tst gene encoding the toxic shock syndrome toxin as well as the lukED, hla, hlb, hld and hlg v virulence genes in some of the isolates. In conclusion, we have shown that the hospital environment could be a reservoir contributing to dissemination of virulent S. aureus and MRSA.

Human-to-Dog Transmission of Methicillin-Resistant Staphylococcus aureus

PubMed Central

Wolfhagen, Maurice J.H.M.; Heck, Max E.O.C.; Wannet, Wim J.B.; Fluit, Ad C.

2004-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) was cultured from the nose of a healthy dog whose owner was colonized with MRSA while she worked in a Dutch nursing home. Pulsed-field gel electrophoresis and typing of the staphylococcal chromosome cassette mec (SCCmec) region showed that both MRSA strains were identical. PMID:15663871

Surveillance of methicillin-resistant Staphylococcus aureus causing nosocomial infections in five medical centers of Monterrey, Nuevo León, México from 2005-2009.

PubMed

Velazquez-Meza, Maria Elena; Hernández-Salgado, Margarita; Contreras-Cordero, Juan F; Pérez-Cortes, Patricia; Villarreal-Treviño, Licet

2013-10-01

Staphylococcus aureus is a principal cause of human bacterial infection worldwide. The dissemination of antibiotic resistance among S. aureus strains is very import in the treatment of Staphylococcal infections. We undertook this study to identify methicillin-resistant Staphylococcus aureus (MRSA) clones responsible for nosocomial infection in five medical centers in Monterrey, Nuevo León (N.L.), México from 2005-2009. One hundred ninety MRSA strains collected from 2005-2009 from five hospitals affiliated with the Instituto Mexicano del Seguro Social (IMSS) in Monterrey, N.L., México were characterized by antimicrobial susceptibility, pulsed field gel electrophoresis (PFGE) and Staphylococcal Cassette Chromosome mec (SCCmec) typing. Only one clone was present in the five hospitals (clone C); this clone is strongly associated with the New York-Japan clone (SCCmec II) with a broad resistance profile. This study clearly documented the high ability for dissemination and the persistence of the New York-Japan clone in these centers. Copyright © 2013 IMSS. Published by Elsevier Inc. All rights reserved.

High diversity of Staphylococcus aureus and Staphylococcus pseudintermedius lineages and toxigenic traits in healthy pet-owning household members. Underestimating normal household contact?

PubMed

Gómez-Sanz, Elena; Torres, Carmen; Lozano, Carmen; Zarazaga, Myriam

2013-01-01

Forty-three unrelated pet-owning households were screened in Spain to study the Staphylococcus aureus and Staphylococcus pseudintermedius nasal carriage, their genetic lineages and virulence traits. Sixty-seven healthy owners and 66 healthy pets were investigated. Isolates characterization was performed and potential interspecies transmission was assessed. S. aureus was present in 51.2% of households studied while S. pseudintermedius in 30.2%. Twenty-eight owners (41.8%) carried S. aureus: one methicillin-resistant S. aureus (MRSA) [t5173-ST8-SCCmecIVa] and 27 methicillin-susceptible S. aureus (MSSA). Three owners (4.5%) were colonized by methicillin-susceptible S. pseudintermedius (MSSP). Fifteen pets (22.7%) carried S. pseudintermedius: two methicillin-resistant S. pseudintermedius (MRSP) [ST71-SCCmecII/III; ST92-SCCmecV] and 13 MSSP; in addition, 8 pets (12.1%) presented MSSA. High diversity of spa and sequence types (STs) was detected. Typical livestock-associated S. aureus lineages (CC398, CC9) were observed in humans and/or companion animals and hospital and/or community-acquired S. aureus lineages (CC45, CC121, CC5, CC8) were detected among pets. Almost 40% of S. pseudintermedius were multidrug-resistant. S. aureus isolates harboured a remarkable high number of virulence genes. The expA gene was detected in 3 S. pseudintermedius isolates. Identical strains from both owners and their pets were identified in 5 households (11.6%): (a) four MSSA (t073-ST45/CC45, t159-ST121/CC121, t209-ST109/CC9, t021-ST1654([new])/singleton) and (b) one multidrug-resistant MSSP (ST142([new])). Highly clonally diverse and toxigenic S. aureus and S. pseudintermedius are common colonizers of healthy humans and pets. The presence of these bacterial species, virulence genes, and interspecies transmission detected, points out to consider pet ownership as a risk factor to acquire, maintain and spread, potential pathogenic bacteria. Copyright © 2012 Elsevier Ltd. All rights reserved.

Methicillin-resistant Staphylococcus aureus nasal carriage among primary school-aged children from Jordan: prevalence, antibiotic resistance and molecular characteristics.

PubMed

Alzoubi, Hamed M; Aqel, Amin A; Al-Sarayreh, Sameeh A; Al-Zayadneh, Enas

2014-12-01

Colonization with methicillin-resistant Staphylococcus aureus (MRSA) increases the risk for subsequent infections with an increased mortality and morbidity. Children were suggested to be a major asymptomatic reservoir for community-associated (CA) MRSA with an ability to quickly spread the MRSA within community. Therefore, the availability of epidemiological and antibiotic susceptibility data of CA-MRSA will be useful for the infection control and management policies. This study aimed to assess the nasal carriage, molecular characteristics and antibiotic susceptibility of MRSA in primary school-aged children from Jordan. A total of 210 nasal swabs were collected from children aged 6-11 years. Isolated MRSA and its SCCmec typing, Spa type and PVL (Panton-Valentine Leukociden) toxin were identified following culture, biochemical and PCR. Antibiogram was determined by the disc diffusion method. The prevalence of CA-MRSA was 7.1%. Allergic rhinitis and recent antibiotic exposure were the only significant risk factors for MRSA nasal carriage among children. Resistance to erythromycin, trimethoprim-sulfamethoxazole and tetracycline was 33.4, 20 and 13.4%, respectively. All isolates were susceptible to the remaining non-β-lactam antibiotics used in this study, in particular linezolid and mupirocin. All MRSA isolates were SCCmec type IV and PVL toxin negative and the majority were Spa type t223. This is the first study to assess the MRSA prevalence among children aged 6-11 years in Jordan. The prevalence in community children is within the range compared with other studies in other countries. The antibiogram, SCCmec and Spa types of the isolated MRSA are much similar to what was found previously in Jordan. However, all isolates were PVL toxin negative. The study recommends increasing the public awareness of MRSA and the proper antibiotics dispensing. Future studies to follow-up on the changing epidemiology of the CA-MRSA in Jordan are also recommended.

Colonization of butchers with livestock-associated methicillin-resistant Staphylococcus aureus.

PubMed

Boost, M; Ho, J; Guardabassi, L; O'Donoghue, M

2013-12-01

Reports have documented colonization of swine in Europe, North America and more recently in China with livestock-associated methicillin-resistant Staphylococcus aureus (LA-MRSA). Contamination of pig farmers, veterinarians and abattoir workers with these strains has been observed. However, although contamination levels of 10% of retail pork were reported from the Netherlands and Canada, there are limited data of contamination rates of workers handling raw meat. We investigated the rates of MRSA contamination of local butchers working in wet markets, where recently slaughtered pigs are cut up. Nasal swabs collected from 300 pork butchers at markets throughout Hong Kong were enriched in brain heart infusion broth with 5% salt and cultured on MRSASelect(®) . Isolates were confirmed as Staphylococcus aureus and susceptibility testing performed. The presence of mecA was confirmed, SCCmec and spa type determined and relatedness investigated by PFGE. Subjects completed a questionnaire on MRSA carriage risk factors. Seventeen samples (5.6%) yielded MRSA, 15 harbouring SCCmec IVb. Ten strains were t899 (CC9), previously reported from local pig carcasses. Five strains were healthcare associated: SCCmec type II, t701(CC6), colonizing two subjects at the same establishment, and single isolates of t008 (CC8), t002 (CC5) and t123 (CC45). The remaining isolates were t359 (CC97), previously reported from buffaloes, and t375 (CC5), reported from bovine milk. None of these butchers reported recent hospitalization or a healthcare worker in the family. Two had recently received antibiotics, one for a skin infection. Four reported wound infections within the last year. All were exposed to meat for >9 h per day. Carriage of MRSA was higher in butchers than in the general community. Although five strains were probably of healthcare origin, the high incidence of t899 (CC9) suggests that cross-contamination from pork occurs frequently. Washing of hands after touching raw pork is advised. © 2012 Blackwell Verlag GmbH.

Biofilm Formation and Its Relationship with the Molecular Characteristics of Food-Related Methicillin-Resistant Staphylococcus aureus (MRSA).

PubMed

Vergara, Alberto; Normanno, Giovanni; Di Ciccio, Pierluigi; Pedonese, Francesca; Nuvoloni, Roberta; Parisi, Antonio; Santagada, Gianfranco; Colagiorgi, Angelo; Zanardi, Emanuela; Ghidini, Sergio; Ianieri, Adriana

2017-10-01

The capability to produce biofilm is an important persistence and dissemination mechanism of some foodborne bacteria. This paper investigates the relationship between some molecular characteristics (SCCmec, ST, spa-type, agr-type, cna, sarA, icaA, icaD, clfA, fnbA, fnbB, hla, hlb) of 22 food-related methicillin-resistant Staphylococcus aureus (MRSA) strains and their ability to form biofilm on stainless steel and polystyrene. Five (22.7%, 5/22) strains were able to synthesize biofilm on polystyrene, and one of these (4.5%, 1/22) strains was also able to synthesize biofilm on stainless steel. The largest amount of biofilm was formed on polystyrene by 2 MRSA strains isolated from cows' milk, thus raising concern about the dairy industry. The majority of MRSA biofilm producers carried SCCmec type IVa, suggesting that the presence of SCCmecIVa and/or agr type III could be related to the ability to form biofilm. In conclusion, in order to achieve an acceptable level of food safety, Good Hygiene Practices should be strictly implemented along the food chain to reduce the risk of colonization and dissemination of MRSA biofilm-producing strains in the food industry. In this study, some assayed isolates of food-related MRSA demonstrated the capacity to form biofilm. Biofilm formation differed according to surface characteristics and MRSA strains. A relationship was observed between some molecular characteristics and the ability to form biofilms. Few studies have investigated the ability of MRSA to form biofilms, and the majority of these studies have investigated clinical aspects. This work was performed to investigate whether or not there is a difference between MRSA food isolates and MRSA clinical isolates in their ability to form biofilm. These initial findings could provide information that will contribute to a better understanding of these aspects. © 2017 Institute of Food Technologists®.

High prevalence of EMRSA-15 in Portuguese public buses: a worrisome finding.

PubMed

Simões, Roméo Rocha; Aires-de-Sousa, Marta; Conceição, Teresa; Antunes, Filipa; da Costa, Paulo Martins; de Lencastre, Hermínia

2011-03-02

The nosocomial prevalence of methicillin resistant Staphylococcus aureus (MRSA) in Portugal remains one of the highest in Europe and is currently around 50%. Transmission of S. aureus, including MRSA, occurs principally by direct human-to-human skin contact. However, S. aureus can survive for long periods on inanimate objects, which may represent an important reservoir for dissemination as well. Between May 2009 and February 2010, handrails of 85 public urban buses circulating in Oporto, Portugal, were screened for the occurrence of MRSA. Twenty-two (26%) buses showed MRSA contamination. The molecular characterization of a total of 55 MRSA, by pulsed-field gel electrophoresis (PFGE), staphylococcal cassette chromosome (SCC) mec typing, spa typing, and multilocus sequence typing (MLST), clustered the isolates into three clonal types. However, the overwhelming majority (n = 50; 91%) of the isolates belonged to a single clone (PFGE A, spa types t747, t032, t025 or t020, ST22, SCCmec type IVh) that exhibits the characteristics of the pandemic EMRSA-15, currently the major lineage circulating in Portuguese hospitals, namely in the Oporto region. Two additional clones were found but in much lower numbers: (i) PFGE B, ST5, spa type t002, SCCmec IVa (n = 3), and (ii) PFGE C, spa type t008, ST8, SCCmec IVa (n = 2). None of the 55 isolates was PVL positive. Public buses in Oporto seem to be an important reservoir of MRSA of nosocomial origin, providing evidence that the major hospital-associated MRSA clone in Portugal is escaping from the primary ecological niche of hospitals to the community environment. Infection control measures are urgently warranted to limit the spread of EMRSA-15 to the general population and future studies are required to assess the eventual increase of MRSA in the Portuguese community, which so far remains low.

Closely related methicillin-resistant Staphylococcus aureus isolates from retail meat, cows with mastitis, and humans in Japan.

PubMed

Sato, Tomomi; Usui, Masaru; Konishi, Noriko; Kai, Akemi; Matsui, Hidehito; Hanaki, Hideaki; Tamura, Yutaka

2017-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a pervasive healthcare-acquired (HA) pathogen with recent emergence as a community-acquired (CA) pathogen. To elucidate whether meat mediates MRSA transmission between animals and humans in Japan, this study examined MRSA isolates from retail meat (n = 8), cows with mastitis (n = 7), and humans (HA-MRSA = 46 and CA-MRSA = 54) by molecular typing, virulence gene analyses, and antimicrobial susceptibility testing. MRSA isolates from retail meat were classified into sequence type (ST) 8/spa type t1767 (n = 4), ST8/t4133 (n = 1), ST59/t3385 (n = 1), ST88/t375 (n = 1), and ST509/t375 (n = 1). All seven MRSA isolates from cows with mastitis were ST8/t1767. 46 HA-MRSA were clonal complex (CC) 5, divided into t002 (n = 30), t045 (n = 12), and t7455 (n = 4). 54 CA-MRSA were classified into 6 different CCs: CC1 (n = 14), CC5 (n = 7), CC8 (n = 29), CC45 (n = 1), CC89 (n = 1), CC509 (n = 1), and into 16 different spa types including newly identified t17177, t17193, and t17194. The majority were CC8/t1767 (n = 16). CC of one CA-MRSA isolate (spa type t1767) was not classified. Among 41 CC8 MRSA (five from meat, seven from cows with mastitis, and 29 CA-MRSA), 14 ST8/SCCmec IVl isolates (three from meat, one from a cow with mastitis, and 10 CA-MRSA) had identical pulsed-field gel electrophoresis patterns and similar spa type (t1767, t4133, and t17177), and were typed as CA-MRSA/J (ST8/SCCmec IVl, positive for sec + sel + tst but negative for Panton-Valentine leukocidin and the arginine catabolic mobile element). These results suggest that there is a transmission cycle of CA-MRSA/J among meat, cows, and humans in Japan, although it is unclear whether the origin is cow.

Closely related methicillin-resistant Staphylococcus aureus isolates from retail meat, cows with mastitis, and humans in Japan

PubMed Central

Konishi, Noriko; Kai, Akemi; Matsui, Hidehito; Hanaki, Hideaki

2017-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a pervasive healthcare-acquired (HA) pathogen with recent emergence as a community-acquired (CA) pathogen. To elucidate whether meat mediates MRSA transmission between animals and humans in Japan, this study examined MRSA isolates from retail meat (n = 8), cows with mastitis (n = 7), and humans (HA-MRSA = 46 and CA-MRSA = 54) by molecular typing, virulence gene analyses, and antimicrobial susceptibility testing. MRSA isolates from retail meat were classified into sequence type (ST) 8/spa type t1767 (n = 4), ST8/t4133 (n = 1), ST59/t3385 (n = 1), ST88/t375 (n = 1), and ST509/t375 (n = 1). All seven MRSA isolates from cows with mastitis were ST8/t1767. 46 HA-MRSA were clonal complex (CC) 5, divided into t002 (n = 30), t045 (n = 12), and t7455 (n = 4). 54 CA-MRSA were classified into 6 different CCs: CC1 (n = 14), CC5 (n = 7), CC8 (n = 29), CC45 (n = 1), CC89 (n = 1), CC509 (n = 1), and into 16 different spa types including newly identified t17177, t17193, and t17194. The majority were CC8/t1767 (n = 16). CC of one CA-MRSA isolate (spa type t1767) was not classified. Among 41 CC8 MRSA (five from meat, seven from cows with mastitis, and 29 CA-MRSA), 14 ST8/SCCmec IVl isolates (three from meat, one from a cow with mastitis, and 10 CA-MRSA) had identical pulsed-field gel electrophoresis patterns and similar spa type (t1767, t4133, and t17177), and were typed as CA-MRSA/J (ST8/SCCmec IVl, positive for sec + sel + tst but negative for Panton–Valentine leukocidin and the arginine catabolic mobile element). These results suggest that there is a transmission cycle of CA-MRSA/J among meat, cows, and humans in Japan, although it is unclear whether the origin is cow. PMID:29084288

The Plasmin-Sensitive Protein Pls in Methicillin-Resistant Staphylococcus aureus (MRSA) Is a Glycoprotein.

PubMed

Bleiziffer, Isabelle; Eikmeier, Julian; Pohlentz, Gottfried; McAulay, Kathryn; Xia, Guoqing; Hussain, Muzaffar; Peschel, Andreas; Foster, Simon; Peters, Georg; Heilmann, Christine

2017-01-01

Most bacterial glycoproteins identified to date are virulence factors of pathogenic bacteria, i.e. adhesins and invasins. However, the impact of protein glycosylation on the major human pathogen Staphylococcus aureus remains incompletely understood. To study protein glycosylation in staphylococci, we analyzed lysostaphin lysates of methicillin-resistant Staphylococcus aureus (MRSA) strains by SDS-PAGE and subsequent periodic acid-Schiff's staining. We detected four (>300, ∼250, ∼165, and ∼120 kDa) and two (>300 and ∼175 kDa) glycosylated surface proteins with strain COL and strain 1061, respectively. The ∼250, ∼165, and ∼175 kDa proteins were identified as plasmin-sensitive protein (Pls) by mass spectrometry. Previously, Pls has been demonstrated to be a virulence factor in a mouse septic arthritis model. The pls gene is encoded by the staphylococcal cassette chromosome (SCC)mec type I in MRSA that also encodes the methicillin resistance-conferring mecA and further genes. In a search for glycosyltransferases, we identified two open reading frames encoded downstream of pls on the SCCmec element, which we termed gtfC and gtfD. Expression and deletion analysis revealed that both gtfC and gtfD mediate glycosylation of Pls. Additionally, the recently reported glycosyltransferases SdgA and SdgB are involved in Pls glycosylation. Glycosylation occurs at serine residues in the Pls SD-repeat region and modifying carbohydrates are N-acetylhexosaminyl residues. Functional characterization revealed that Pls can confer increased biofilm formation, which seems to involve two distinct mechanisms. The first mechanism depends on glycosylation of the SD-repeat region by GtfC/GtfD and probably also involves eDNA, while the second seems to be independent of glycosylation as well as eDNA and may involve the centrally located G5 domains. Other previously known Pls properties are not related to the sugar modifications. In conclusion, Pls is a glycoprotein and Pls glycosyl residues can stimulate biofilm formation. Thus, sugar modifications may represent promising new targets for novel therapeutic or prophylactic measures against life-threatening S. aureus infections.

Comparison of ESBL – And AmpC Producing Enterobacteriaceae and Methicillin-Resistant Staphylococcus aureus (MRSA) Isolated from Migratory and Resident Population of Rooks (Corvus frugilegus) in Austria

PubMed Central

Mehinagic, Kemal; Rosengarten, Renate; Hoelzl, Franz; Knauer, Felix; Walzer, Chris

2013-01-01

In order to test whether rooks (Corvus frugilegus) represent good indicators for the potential circulation of antibiotics in their native habitat, two populations with different migratory behavior were tested for the presence of beta-lactamase producing Enterobacteriaceae and methicillin-resistant Staphylococcus aureus (MRSA). In all, 54 and 102 samples of fresh feces of a migratory and a resident population were investigated. A total of 24 and 3 cefotaxime-resistant enterobacterial isolates were obtained from the migratory and resident population, respectively. In these isolates CTX-M-1 (n = 15), CTX-M-3 (n = 3), and CTX-M-15 (n = 3) genes were detected. TEM-1 and OXA-1 were associated with CTX-M in 3 and 2 isolates, respectively. In two E. coli isolates CMY-2 could be detected, where from one isolate displayed an overexpression of chromosomal AmpC as well. Among E. coli isolates the most common phylogenetic group was A (n = 11) and ST1683 (n = 5). In one E. coli of B2-ST131 the rfbO25b locus was detected. Three Enterobacter isolates were stably derepressed AmpC-producers. In five samples of the migratory population, PVL positive MRSA could be isolated. Two isolates were typed SCCmec IVa, spa type t127, and ST1. Three isolates carried a SCCmec type IVc, with spa type t852 and ST22. The highly significant difference of the occurrence of antibiotic resistance between the migratory population from eastern Europe compared to resident population in our study indicates that rooks may be good indicator species for the evaluation of environmental contamination with antibiotic resistant bacteria, especially due to their ecology, foraging behavior and differing migratory behavior. PMID:24391878

Presence, Distribution, and Molecular Epidemiology of Methicillin-Resistant Staphylococcus aureus in a Small Animal Teaching Hospital: A Year-Long Active Surveillance Targeting Dogs and Their Environment

PubMed Central

van Balen, Joany; Kelley, Christina; Nava-Hoet, Rocio C.; Bateman, Shane; Hillier, Andrew; Dyce, Jonathan; Wittum, Thomas E.

2013-01-01

Abstract Methicillin-resistant Staphylococcus aureus (MRSA) is known to be present in small animal veterinary clinical environments. However, a better understanding of the ecology and dynamics of MRSA in these environments is necessary for the development of effective infectious disease prevention and control programs. To achieve this goal, a yearlong active MRSA surveillance program was established at The Ohio State University (OSU) Veterinary Medical Center to describe the spatial and molecular epidemiology of this bacterium in the small animal hospital. Antimicrobial susceptibility testing, staphylococcal chromosomal cassette mec (SCCmec) typing, pulsed-field gel electrophoresis (PFGE) typing, and dendrogram analysis were used to characterize and analyze the 81 environmental and 37 canine-origin MRSA isolates obtained during monthly sampling events. Overall, 13.5% of surfaces were contaminated with MRSA at 1 or more sampling times throughout the year. The majority of the environmental and canine isolates were SCCmec type II (93.8% and 86.5%, respectively) and USA100 (90.1% and 86.5%, respectively). By PFGE analysis, these isolates were found to be closely related, which reflects a low diversity of MRSA strains circulating in the hospital. For 5 consecutive months, 1 unique pulsotype was the most prevalent across the medical services and was recovered from a variety of surfaces and hospital locations. Carts/gurneys, doors, and examination tables/floors were the most frequently contaminated surfaces. Some surfaces maintained the same pulsotypes for 3 consecutive months. Molecular analysis found that incoming MRSA-positive dogs were capable of introducing a new pulsotype into the hospital environment during the surveillance period. Our results suggest that once a MRSA strain is introduced into the hospital environment, it can be maintained and spread for extended periods of time. These findings can aid in the development of biosecurity and biocontainment protocols aimed at reducing environmental contamination and potential exposures to MRSA in veterinary hospital staff, clients, and patients. PMID:23473216

Staphylococcus aureus nasal carriage among outpatients attending primary health care centers: a comparative study of two cities in Saudi Arabia and Egypt.

PubMed

Abou Shady, Hala M; Bakr, Alaa Eldin A; Hashad, Mahmoud E; Alzohairy, Mohammad A

2015-01-01

Epidemiological and molecular data on community acquired methicillin resistant Staphylococcus aureus (CA-MRSA) are still scarce in both Egypt and Saudi Arabia. There is almost no data regarding methicillin resistant Staphylococcus aureus (MRSA) prevalence in both countries. This study was conducted to investigate the prevalence and molecular epidemiology of S. aureus and MRSA nasal carriage among outpatients attending primary health care centers in two big cities in both countries. A total of 206 nasal swabs were obtained, 103 swabs from each country. S. aureus isolates were characterized by antibiotic susceptibility, presence of mecA and PVL genes, SCCmec-typing and spa typing, the corresponding Multi locus sequence typing clonal complex was assigned for each spa type based on Ridom StaphType database. MRSA was detected in 32% of the Egyptian outpatients while it was found in 25% of the Saudi Arabian outpatients. All MRSA isolates belonged to SCCmec type V and IVa, where some isolates in Saudi Arabia remained nontypeable. Surprisingly PVL(+) isolates were low in frequency: 15% of MRSA Egyptian isolates and 12% of MRSA isolates in Saudi Arabia. Two novel spa types were detected t11839 in Egypt, and t11841 in Saudi Arabia. We found 8 spa types among 20 isolates from Egypt, and 12 spa types out of 15 isolates from Saudi Arabia. Only two spa types t008 and t223 coexisted in both countries. Four clonal complexes (CC5, CC8, CC22, and CC80) were identified in both Egypt and Saudi Arabia. However, the data collected lacked a representation of isolates from different parts of each country as only one health center from each country was included, it still partially illustrates the CA-MRSA situation in both countries. In conclusion a set of control measures is required to prevent further increase in MRSA prevalence. Copyright © 2014 Elsevier Editora Ltda. All rights reserved.

Presence, distribution, and molecular epidemiology of methicillin-resistant Staphylococcus aureus in a small animal teaching hospital: a year-long active surveillance targeting dogs and their environment.

PubMed

van Balen, Joany; Kelley, Christina; Nava-Hoet, Rocio C; Bateman, Shane; Hillier, Andrew; Dyce, Jonathan; Wittum, Thomas E; Hoet, Armando E

2013-05-01

Methicillin-resistant Staphylococcus aureus (MRSA) is known to be present in small animal veterinary clinical environments. However, a better understanding of the ecology and dynamics of MRSA in these environments is necessary for the development of effective infectious disease prevention and control programs. To achieve this goal, a yearlong active MRSA surveillance program was established at The Ohio State University (OSU) Veterinary Medical Center to describe the spatial and molecular epidemiology of this bacterium in the small animal hospital. Antimicrobial susceptibility testing, staphylococcal chromosomal cassette mec (SCCmec) typing, pulsed-field gel electrophoresis (PFGE) typing, and dendrogram analysis were used to characterize and analyze the 81 environmental and 37 canine-origin MRSA isolates obtained during monthly sampling events. Overall, 13.5% of surfaces were contaminated with MRSA at 1 or more sampling times throughout the year. The majority of the environmental and canine isolates were SCCmec type II (93.8% and 86.5%, respectively) and USA100 (90.1% and 86.5%, respectively). By PFGE analysis, these isolates were found to be closely related, which reflects a low diversity of MRSA strains circulating in the hospital. For 5 consecutive months, 1 unique pulsotype was the most prevalent across the medical services and was recovered from a variety of surfaces and hospital locations. Carts/gurneys, doors, and examination tables/floors were the most frequently contaminated surfaces. Some surfaces maintained the same pulsotypes for 3 consecutive months. Molecular analysis found that incoming MRSA-positive dogs were capable of introducing a new pulsotype into the hospital environment during the surveillance period. Our results suggest that once a MRSA strain is introduced into the hospital environment, it can be maintained and spread for extended periods of time. These findings can aid in the development of biosecurity and biocontainment protocols aimed at reducing environmental contamination and potential exposures to MRSA in veterinary hospital staff, clients, and patients.

Vancomycin modifies the expression of the agr system in multidrug-resistant Staphylococcus aureus clinical isolates

PubMed Central

Cázares-Domínguez, Vicenta; Ochoa, Sara A.; Cruz-Córdova, Ariadnna; Rodea, Gerardo E.; Escalona, Gerardo; Olivares, Alma L.; Olivares-Trejo, José de Jesús; Velázquez-Guadarrama, Norma; Xicohtencatl-Cortes, Juan

2015-01-01

Staphylococcus aureus is an opportunistic pathogen that colonizes human hosts and causes a wide variety of diseases. Two interacting regulatory systems called agr (accessory gene regulator) and sar (staphylococcal accessory regulator) are involved in the regulation of virulence factors. The aim of this study was to evaluate the effect of vancomycin on hld and spa gene expression during the exponential and post-exponential growth phases in multidrug-resistant (MDR) S. aureus. Methods: Antibiotic susceptibility was evaluated by the standard microdilution method. The phylogenetic profile was obtained by pulsed-field gel electrophoresis (PFGE). Polymorphisms of agr and SCCmec (staphylococcal cassette chromosome mec) were analyzed by multiplex polymerase chain reaction (PCR). The expression levels of hld and spa were analyzed by reverse transcription-PCR. An enzyme-linked immunosorbent assay (ELISA) was performed to detect protein A, and biofilm formation was analyzed via crystal violet staining. Results: In total, 60.60% (20/33) of S. aureus clinical isolates were MDR. Half (10/20) of the MDR S. aureus isolates were distributed in subcluster 10, with >90% similarity among them. In the isolates of this subcluster, a high prevalence (100%) for the agrII and the cassette SCCmec II polymorphisms was found. Our data showed significant increases in hld expression during the post-exponential phase in the presence and absence of vancomycin. Significant increases in spa expression, protein A production and biofilm formation were observed during the post-exponential phase when the MDR S. aureus isolates were challenged with vancomycin. Conclusion: The polymorphism agrII, which is associated with nosocomial isolates, was the most prevalent polymorphism in MDR S. aureus. Additionally, under our study conditions, vancomycin modified hld and spa expression in these clinical isolates. Therefore, vancomycin may regulate alternative systems that jointly participate in the regulation of these virulence factors. PMID:25999924

Complete Genome Sequence of the MRSA Isolate HC1335 from ST239 Lineage Displaying a Truncated AgrC Histidine Kinase Receptor

PubMed Central

Botelho, Ana M. N.; Costa, Maiana O. C.; Beltrame, Cristiana O.; Ferreira, Fabienne A.; Lima, Nicholas C. B.; Costa, Bruno S. S.; de Morais, Guilherme L.; Souza, Rangel C.; Almeida, Luiz G. P.; Vasconcelos, Ana T. R.; Nicolás, Marisa F.; Figueiredo, Agnes M. S.

2016-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is still one of the most important hospital pathogen globally. The multiresistant isolates of the ST239-SCCmecIII lineage are spread over large geographic regions, colonizing and infecting hospital patients in virtually all continents. The balance between fitness (adaptability) and virulence potential is likely to represent an important issue in the clonal shift dynamics leading the success of some specific MRSA clones over another. The accessory gene regulator (agr) is the master quorum sensing system of staphylococci playing a role in the global regulation of key virulence factors. Consequently, agr inactivation in S. aureus may represent a significant mechanism of genetic variability in the adaptation of this healthcare-associated pathogen. We report here the complete genome sequence of the methicillin-resistant S. aureus, isolate HC1335, a variant of the ST239 lineage, which presents a natural insertion of an IS256 transposase element in the agrC gene encoding AgrC histidine kinase receptor. PMID:27635055

MRSA Causing Infections in Hospitals in Greater Metropolitan New York: Major Shift in the Dominant Clonal Type between 1996 and 2014.

PubMed

Pardos de la Gandara, Maria; Curry, Marie; Berger, Judith; Burstein, David; Della-Latta, Phyllis; Kopetz, Virgina; Quale, John; Spitzer, Eric; Tan, Rexie; Urban, Carl; Wang, Guiqing; Whittier, Susan; de Lencastre, Herminia; Tomasz, Alexander

2016-01-01

A surveillance study in 1996 identified the USA100 clone (ST5/SCCmecII)-also known as the "New York/Japan" clone-as the most prevalent MRSA causing infections in 12 New York City hospitals. Here we update the epidemiology of MRSA in seven of the same hospitals eighteen years later in 2013/14. Most of the current MRSA isolates (78 of 121) belonged to the MRSA clone USA300 (CC8/SCCmecIV) but the USA100 clone-dominant in the 1996 survey-still remained the second most frequent MRSA (25 of the 121 isolates) causing 32% of blood stream infections. The USA300 clone was most common in skin and soft tissue infections (SSTIs) and was associated with 84.5% of SSTIs compared to 5% caused by the USA100 clone. Our data indicate that by 2013/14, the USA300 clone replaced the New York/Japan clone as the most frequent cause of MRSA infections in hospitals in Metropolitan New York. In parallel with this shift in the clonal type of MRSA, there was also a striking change in the types of MRSA infections from 1996 to 2014.

A methicillin-resistant Staphylococcus aureus (MRSA) Sequence Type 8, spa type t11469 causing infection and colonizing horses in Italy.

PubMed

Carfora, Virginia; Caprioli, Andrea; Grossi, Ilaria; Pepe, Marco; Alba, Patricia; Lorenzetti, Serena; Amoruso, Roberta; Sorbara, Luigi; Franco, Alessia; Battisti, Antonio

2016-06-01

A Methicillin-resistantStaphylococcus aureus(MRSA) was isolated in Italy from a pathological sample of a mare presenting chronic purulent sinusitis and that had undergone frontal-sinus surgery three months before. Humans, horses, dogs and environmental samples were subsequently collected at the mare's stable and at the Veterinary Hospital, where the mare was operated/hospitalized, and screened for the presence of MRSA that was detected from other horses and from the environment at both sites. All the MRSA isolates belonged to clonal complex (CC)8, ST8-t11469-SCCmec-IVa, and showed similar phenotypic and genetic multidrug resistance patterns and macrorestriction-pulsed-field gel electrophoresis profiles. The only MRSA detected from humans was a CC1, ST1-t127-SCCmec-IVa. This paper represents the first report of a clinical MRSA infection in a horse in Italy. This study also supports the opinion that improper use of antibiotics and hospitalization/surgery can represent risk factors for MRSA colonization/infection in horses, and that the environment is among important sources for exposure. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Origin and evolution of European community-acquired methicillin-resistant Staphylococcus aureus.

PubMed

Stegger, Marc; Wirth, Thierry; Andersen, Paal S; Skov, Robert L; De Grassi, Anna; Simões, Patricia Martins; Tristan, Anne; Petersen, Andreas; Aziz, Maliha; Kiil, Kristoffer; Cirković, Ivana; Udo, Edet E; del Campo, Rosa; Vuopio-Varkila, Jaana; Ahmad, Norazah; Tokajian, Sima; Peters, Georg; Schaumburg, Frieder; Olsson-Liljequist, Barbro; Givskov, Michael; Driebe, Elizabeth E; Vigh, Henrik E; Shittu, Adebayo; Ramdani-Bougessa, Nadjia; Rasigade, Jean-Philippe; Price, Lance B; Vandenesch, Francois; Larsen, Anders R; Laurent, Frederic

2014-08-26

Community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) was recognized in Europe and worldwide in the late 1990s. Within a decade, several genetically and geographically distinct CA-MRSA lineages carrying the small SCCmec type IV and V genetic elements and the Panton-Valentine leukocidin (PVL) emerged around the world. In Europe, the predominant CA-MRSA strain belongs to clonal complex 80 (CC80) and is resistant to kanamycin/amikacin and fusidic acid. CC80 was first reported in 1993 but was relatively rare until the late 1990s. It has since been identified throughout North Africa, the Middle East, and Europe, with recent sporadic reports in sub-Saharan Africa. While strongly associated with skin and soft tissue infections, it is rarely found among asymptomatic carriers. Methicillin-sensitive S. aureus (MSSA) CC80 strains are extremely rare except in sub-Saharan Africa. In the current study, we applied whole-genome sequencing to a global collection of both MSSA and MRSA CC80 isolates. Phylogenetic analyses strongly suggest that the European epidemic CA-MRSA lineage is derived from a PVL-positive MSSA ancestor from sub-Saharan Africa. Moreover, the tree topology suggests a single acquisition of both the SCCmec element and a plasmid encoding the fusidic acid resistance determinant. Four canonical SNPs distinguish the derived CA-MRSA lineage and include a nonsynonymous mutation in accessory gene regulator C (agrC). These changes were associated with a star-like expansion into Europe, the Middle East, and North Africa in the early 1990s, including multiple cases of cross-continent imports likely driven by human migrations. With increasing levels of CA-MRSA reported from most parts of the Western world, there is a great interest in understanding the origin and factors associated with the emergence of these epidemic lineages. To trace the origin, evolution, and dissemination pattern of the European CA-MRSA clone (CC80), we sequenced a global collection of strains of the S. aureus CC80 lineage. Our study determined that a single descendant of a PVL-positive methicillin-sensitive ancestor circulating in sub-Saharan Africa rose to become the dominant CA-MRSA clone in Europe, the Middle East, and North Africa. In the transition from a methicillin-susceptible lineage to a successful CA-MRSA clone, it simultaneously became resistant to fusidic acid, a widely used antibiotic for skin and soft tissue infections, thus demonstrating the importance of antibiotic selection in the success of this clone. This finding furthermore highlights the significance of horizontal gene acquisitions and underscores the combined importance of these factors for the success of CA-MRSA. Copyright © 2014 Stegger et al.

Molecular and Phenotypic Characterization of Staphylococcus epidermidis Isolates from Healthy Conjunctiva and a Comparative Analysis with Isolates from Ocular Infection

PubMed Central

Flores-Páez, Luis A.; Zenteno, Juan C.; Alcántar-Curiel, María D.; Vargas-Mendoza, Carlos F.; Rodríguez-Martínez, Sandra; Cancino-Diaz, Mario E.; Jan-Roblero, Janet; Cancino-Diaz, Juan C.

2015-01-01

Staphylococcus epidermidis is a common commensal of healthy conjunctiva and it can cause endophthalmitis, however its presence in conjunctivitis, keratitis and blepharitis is unknown. Molecular genotyping of S. epidermidis from healthy conjunctiva could provide information about the origin of the strains that infect the eye. In this paper two collections of S. epidermidis were used: one from ocular infection (n = 62), and another from healthy conjunctiva (n = 45). All isolates were genotyped by pulsed field gel electrophoresis (PFGE), multilocus sequence typing (MLST), staphylococcal cassette chromosome mec (SCCmec), detection of the genes icaA, icaD, IS256 and polymorphism type of agr locus. The phenotypic data included biofilm production and antibiotic resistance. The results displayed 61 PFGE types from 107 isolates and they were highly discriminatory. MLST analysis generated a total of 25 STs, of which 11 STs were distributed among the ocular infection isolates and lineage ST2 was the most frequent (48.4%), while 14 STs were present in the healthy conjunctiva isolates and lineage ST5 was the most abundant (24.4%). By means of a principal coordinates analysis (PCoA) and a discriminant analysis (DA) it was found that ocular infection isolates had as discriminant markers agr III or agr II, SCCmec V or SCCmec I, mecA gene, resistance to tobramycin, positive biofilm, and IS256+. In contrast to the healthy conjunctiva isolates, the discriminating markers were agr I, and resistance to chloramphenicol, ciprofloxacin, gatifloxacin and oxacillin. The discriminant biomarkers of ocular infection were examined in healthy conjunctiva isolates, and it was found that 3 healthy conjunctiva isolates [two with ST2 and another with ST9] (3/45, 6.66%) had similar genotypic and phenotypic characteristics to ocular infection isolates, therefore a small population from healthy conjunctiva could cause an ocular infection. These data suggest that the healthy conjunctiva isolates do not, in almost all cases, infect the eye due to their large genotypic and phenotypic difference with the ocular infection isolates. PMID:26275056

Activity of Ceftaroline and Epidemiologic Trends in Staphylococcus aureus Isolates Collected from 43 Medical Centers in the United States in 2009▿

PubMed Central

Richter, Sandra S.; Heilmann, Kristopher P.; Dohrn, Cassie L.; Riahi, Fathollah; Costello, Andrew J.; Kroeger, Jennifer S.; Biek, Donald; Critchley, Ian A.; Diekema, Daniel J.; Doern, Gary V.

2011-01-01

A Staphylococcus aureus surveillance program was initiated in the United States to examine the in vitro activity of ceftaroline and epidemiologic trends. Susceptibility testing by Clinical and Laboratory Standards Institute broth microdilution was performed on 4,210 clinically significant isolates collected in 2009 from 43 medical centers. All isolates were screened for mecA by PCR and evaluated by pulsed-field gel electrophoresis. Methicillin-resistant S. aureus (MRSA) were analyzed for Panton-Valentine leukocidin (PVL) genes and the staphylococcal cassette chromosome mec (SCCmec) type. All isolates had ceftaroline MICs of ≤2 μg/ml with an MIC50 of 0.5 and an MIC90 of 1 μg/ml. The overall resistance rates, expressed as the percentages of isolates that were intermediate and resistant (or nonsusceptible), were as follows: ceftaroline, 1.0%; clindamycin, 30.2% (17.4% MIC ≥ 4 μg/ml; 12.8% inducible); daptomycin, 0.2%; erythromycin, 65.5%; levofloxacin, 39.9%; linezolid, 0.02%; oxacillin, 53.4%; tetracycline, 4.4%; tigecycline, 0%; trimethoprim-sulfamethoxazole, 1.6%; vancomycin, 0%; and high-level mupirocin, 2.2%. The mecA PCR was positive for 53.4% of the isolates. The ceftaroline MIC90s were 0.25 μg/ml for methicillin-susceptible S. aureus and 1 μg/ml for MRSA. Among the 2,247 MRSA isolates, 51% were USA300 (96.9% PVL positive, 99.7% SCCmec type IV) and 17% were USA100 (93.4% SCCmec type II). The resistance rates for the 1,137 USA300 MRSA isolates were as follows: erythromycin, 90.9%; levofloxacin, 49.1%; clindamycin, 7.6% (6.2% MIC ≥ 4 μg/ml; 1.4% inducible); tetracycline, 3.3%; trimethoprim-sulfamethoxazole, 0.8%; high-level mupirocin, 2.7%; daptomycin, 0.4%; and ceftaroline and linezolid, 0%. USA300 is the dominant clone causing MRSA infections in the United States. Ceftaroline demonstrated potent in vitro activity against recent S. aureus clinical isolates, including MRSA, daptomycin-nonsusceptible, and linezolid-resistant strains. PMID:21709080

Comparison of Genotypes and Enterotoxin Genes Between Staphylococcus aureus Isolates from Blood and Nasal Colonizers in a Korean Hospital

PubMed Central

Peck, Kyong Ran; Baek, Jin Yang; Song, Jae-Hoon

2009-01-01

In this study, we investigated the genetic background of 70 Staphylococcus aureus isolates (36 methicillin-resistant S. aureus [MRSA] and 34 methicillin-susceptible S. aureus [MSSA]) obtained from blood at a Korean tertiary-care hospital, using spa typing, multilocus sequence typing, and SCCmec typing. In addition, the prevalence of enterotoxin (sea, seb, sec, sed, see, seg, seh, sei, and sek), tst, and pvl genes among the samples was assessed via polymerase chain reaction, and the results were compared with those of 95 isolates of S. aureus obtained from nasal swabs. All MRSA isolates from blood, except one, belonged to three major clones: sequence type (ST)5-MRSA-II, ST72-MRSA-II (or IVA), and ST239-MRSA-III, among which ST5-MRSA-II was the predominant clone. The prevalence of enterotoxin genes in the S. aureus isolates obtained from blood differed significantly from those from the nasal swabs for the sea, seb, sec, and seh gene. In particular, the seb and sec genes were detected exclusively in the MRSA isolates of ST5 or spa-CC002, thereby suggesting the co-adaptation of virulence genes with the genetic background and their contribution to biological fitness. PMID:19654937

Mannitol-negative methicillin-resistant Staphylococcus aureus from nasal swab specimens in Brazil.

PubMed

dos Santos, Danielle Caldeira Martins; da Costa, Thaina Miranda; Rabello, Renata Fernandes; Alves, Fábio Aguiar; de Mondino, Silvia Susana Bona

2015-06-01

The isolation of mannitol-negative methicillin-resistant Staphylococcus aureus from nasal swabs is reported. Among the 59 isolates, 9 (15%) isolates were mannitol-negative; all of these isolates were categorized as staphylococcal cassette chromosome mec (SCCmec) type IVa. This report emphasizes that mannitol fermentation on mannitol salt agar should not be used as the sole criterion when screening nasal swab specimens for S. aureus.

Genotypic Diversity of Methicillin-Resistant Staphylococcus aureus Isolates in Korean Hospitals

PubMed Central

Soo Ko, Kwan; Kim, Yeon-Sook; Song, Jae-Hoon; Yeom, Joon-Sup; Lee, Hyuck; Jung, Sook-In; Jeong, Doo-Ryun; Kim, Shin-Woo; Chang, Hyun-Ha; Ki, Hyun Kyun; Moon, Chisook; Oh, Won Sup; Peck, Kyong Ran; Lee, Nam Yong

2005-01-01

Ninety-six methicillin-resistant Staphylococcus aureus (MRSA) isolates from eight Korean hospitals were analyzed by multilocus sequence typing, SCCmec typing, and spa typing. The predominant genotype was ST5-MRSA-II of clonal complex 5, which was found in 36 isolates from six hospitals, but ST239-MRSA-III was also common. Overall, results showed a notable genotypic diversity of MRSA strains circulating in Korean hospitals. PMID:16048991

Genotypic diversity of methicillin-resistant Staphylococcus aureus isolates in Korean hospitals.

PubMed

Soo Ko, Kwan; Kim, Yeon-Sook; Song, Jae-Hoon; Yeom, Joon-Sup; Lee, Hyuck; Jung, Sook-In; Jeong, Doo-Ryun; Kim, Shin-Woo; Chang, Hyun-Ha; Ki, Hyun Kyun; Moon, Chisook; Oh, Won Sup; Peck, Kyong Ran; Lee, Nam Yong

2005-08-01

Ninety-six methicillin-resistant Staphylococcus aureus (MRSA) isolates from eight Korean hospitals were analyzed by multilocus sequence typing, SCCmec typing, and spa typing. The predominant genotype was ST5-MRSA-II of clonal complex 5, which was found in 36 isolates from six hospitals, but ST239-MRSA-III was also common. Overall, results showed a notable genotypic diversity of MRSA strains circulating in Korean hospitals.

Linezolid-resistant Staphylococcus haemolyticus and Staphylococcus hominis: single and double mutations at the domain V of 23S rRNA among isolates from a Rio de Janeiro hospital.

PubMed

Chamon, Raiane Cardoso; Iorio, Natalia Lopes Pontes; Cavalcante, Fernanda Sampaio; Teodoro, Cristiane R S; de Oliveira, Ana Paula Chaves; Maia, Fernanda; dos Santos, Kátia Regina Netto

2014-12-01

In this work, the molecular and phenotypic antimicrobial resistance and clonal diversity of 10 linezolid-resistant Staphylococcus spp. isolates were investigated. The 7 Staphylococcus haemolyticus isolates presented Staphylococcal cassete chromosome mec (SCCmec) V and belonged to the same pulsed-field gel electrophoresis pulsotype. Their MICs for oxacillin, vancomycin, and linezolid were ≥ 256 μg/mL, 1-4 μg/mL, and 8-16 μg/mL, respectively. The 3 S. hominis presented MIC values 32 to >256 μg/mL, 2-4 μg/mL, and 12-24 μg/mL, and all carried the nontypeable SCCmec (ccr1 + mecA class) and belonged to 2 different genotypes. The cfr gene was not found, but the mutation G2603T was detected in S. haemolyticus and C2190T and G2603T in Staphylococcus hominis in 23S rRNA. This study demonstrates the spread of a linezolid-resistant S. haemolyticus genotype and, for the first time, describes the mutation C2190T among S. hominis isolates with a double mutation in Brazil. Copyright © 2014 Elsevier Inc. All rights reserved.

Low prevalence of methicillin-resistant Staphylococcus aureus nasal carriage in urban and rural community settings in Bolivia and Peru.

PubMed

Bartoloni, Alessandro; Pallecchi, Lucia; Fernandez, Connie; Mantella, Antonia; Riccobono, Eleonora; Magnelli, Donata; Mannini, Dario; Strohmeyer, Marianne; Bartalesi, Filippo; Segundo, Higinio; Monasterio, Joaquin; Rodriguez, Hugo; Cabezas, César; Gotuzzo, Eduardo; Rossolini, Gian Maria

2013-05-01

To investigate the prevalence of methicillin-resistant Staphylococcus aureus (MRSA) nasal carriage in rural and urban community settings of Bolivia and Peru. MRSA nasal carriage was investigated in 585 individuals living in rural and urban areas of Bolivia and Peru (one urban area, one small rural village, and two native communities, one of which was highly isolated). MRSA isolates were subjected to molecular analysis for the detection of virulence genes, characterization of the staphylococcal cassette chromosome mec (SCCmec), and genotyping (multilocus sequence typing (MLST) and pulsed-field gel electrophoresis (PFGE)). An overall very low prevalence of MRSA nasal carriage was observed (0.5%), with MRSA carriers being detected only in a small rural village of the Bolivian Chaco. The three MRSA isolates showed the characteristics of community-associated MRSA (being susceptible to all non-beta-lactam antibiotics and harboring the SCCmec type IV), were clonally related, and belonged to ST1649. This study provides an insight into the epidemiology of MRSA in community settings of Bolivia and Peru. Reliable, time-saving, and low-cost methods should be implemented to encourage continued surveillance of MRSA dissemination in resource-limited countries. Copyright © 2012 International Society for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Diversity of methicillin-resistant Staphylococcus aureus (MRSA) isolated from Austrian ruminants and New World camelids.

PubMed

Schauer, B; Krametter-Frötscher, R; Knauer, F; Ehricht, R; Monecke, S; Feßler, A T; Schwarz, S; Grunert, T; Spergser, J; Loncaric, I

2018-02-01

The aim of this study was to determine the prevalence, the antimicrobial resistance patterns and the genetic diversity of methicillin-resistant Staphylococcus aureus (MRSA) from Austrian ruminants and New World camelids that were treated at the University of Veterinary Medicine, Vienna. Between April 2014 and January 2017, 723 nasal swabs originating from ruminants and New World camelids were examined. MRSA isolates were characterized by mecA/mecA1/mecC PCRs and by DNA microarray analysis. They were genotyped by spa typing, dru typing, MLST and MLVA. Glycopolymer fingerprinting by FTIR spectroscopy was also performed. Antimicrobial susceptibility testing was conducted by agar disk diffusion. Twelve MRSA isolates were mecA-positive, whereas three were mecC-positive. The MRSA isolates carried five different SCCmec elements, and belonged to three sequence types (ST45, ST130, ST398). The MRSA isolates displayed seven different resistance phenotypes. The present study describes for the first time mecC-carrying MRSA isolates originating from domesticated animals in Austria. More systematic studies are needed to unravel the role of ruminants and New World camelids as reservoirs for MRSA as a potential risk for zooanthropogenic transmission. Copyright © 2018 Elsevier B.V. All rights reserved.

Molecular Typing and Virulence Characteristic of Methicillin-Resistant Staphylococcus Aureus Isolates from Pediatric Patients in Bucaramanga, Colombia

PubMed Central

Machuca, Mayra Alejandra; Sosa, Luis Miguel; González, Clara Isabel

2013-01-01

Background Staphylococcus aureus is among the most common global nosocomial pathogens. The emergence and spread of methicillin-resistant Staphylococcus aureus (MRSA) is a public health problem worldwide that causes nosocomial and community infections. The goals of this study were to establish the clonal complexes (CC) of the isolates of MRSA obtained from pediatric patients in a university hospital in Colombia and to investigate its molecular characteristics based on the virulence genes and the genes of staphylococcal toxins and adhesins. Methods A total of 53 MRSA isolates from pediatric patients with local or systemic infections were collected. The MRSA isolates were typed based on the SCCmec, MLST, spa and agr genes. The molecular characterization included the detection of Panton-Valentine Leukocidin, superantigenic and exfoliative toxins, and adhesin genes. The correlation between the molecular types identified and the profile of virulence factors was determined for all isolates. Results Four CC were identified, including CC8, CC5, CC80 and CC78. The ST8-MRSA-IVc-agrI was the predominant clone among the isolates, followed by the ST5-MRSA-I-agrII and ST5-MRSA-IVc-agrII clones. Twelve spa types were identified, of which t10796 and t10799 were new repeat sequences. The isolates were carriers of toxin genes, and hlg (100%), sek (92%) and pvl (88%) were the most frequent. Ten toxin gene profiles were observed, and the most frequent were seq-sek-hlg (22.6%), sek-hlg (22.6%), seb-seq-sek-hlg (18.9%) and seb-sek-hlg (15.1%). The adhesion genes were present in most of the MRSA isolates, including the following: clf-A (89%), clf-B (87%), fnb-A (83%) and ica (83%). The majority of the strains carried SCCmec-IVc and were identified as causing nosocomial infection. No significant association between a molecular type and the virulence factors was found. Conclusion Four major MRSA clone complexes were identified among the isolates. ST8-MRSA-IVc-agrI pvl+ (USA300-LV) was the most frequent, confirming the presence of community-associated MRSA in Colombian hospitals. PMID:24058415

Epidemiology and molecular characterization of methicillin-resistant Staphylococcus aureus nasal carriage isolates from bovines

PubMed Central

2014-01-01

Background Staphylococcus aureus is a common bacterium usually found on skin and mucous membranes of warm blooded animals. Resistance in S. aureus has been increasingly reported though depending on the clonal lineage. Indeed, while hospital acquired (HA)-methicillin resistant S. aureus (MRSA) are typically multi-resistant, community associated (CA)-MRSA are by large more susceptible to many antibiotics. Although S. aureus isolated from animals are often susceptible to most antibiotics, multi-resistant livestock associated (LA)-MRSA have been recovered from bovine mastitis. In this study, we investigated the prevalence and types of MRSA present in the nose of healthy bovines of different age groups and rearing practices. Since no validated methods for MRSA isolation from nasal swabs were available, we compared two isolation methods. Molecular characterization was performed by means of spa-typing, MLST, SCCmec typing and microarray analysis for the detection of antimicrobial resistance and virulence genes. Results MRSA between herd prevalence in bovines was estimated at 19.8%. There was a marked difference between rearing practices with 9.9%, 10.2% and 46.1% of the dairy, beef and veal calve farms respectively being MRSA positive. No significant difference was observed between both isolation methods tested. Most isolates were ST398 spa type t011 or closely related spa types. Few ST239 spa type t037 and t388 and ST8 spa type t121 were also found. SCCmec types carried by these strains were mainly type IV(2B), IV(2B&5) and type V. Type III and non-typeable SCCmec were recovered to a lesser extent. All isolates were multi-resistant to at least two antimicrobials in addition to the expected cefoxitin and penicillin resistance, with an average of resistance to 9.5 different antimicrobials. Isolates selected for microarray analysis carried a broad range of antimicrobial resistance and virulence genes. Conclusion MRSA were mainly present in veal farms, compared to the lower prevalence in dairy or beef farms. Multi-resistance in these strains was high. Though mainly CC398 spa t011 was found, the genetic diversity was higher than what was found for pigs in Belgium. CC8 strains, a typically human lineage but also recently found also in association with bovines, has been retrieved here also. PMID:25011427

The first case report of non-nosocomial healthcare-associated infective endocarditis due to methicillin-resistant Staphylococcus aureus USA400 in Rio de Janeiro, Brazil.

PubMed

Damasco, P V; Cavalcante, F S; Chamon, R C; Ferreira, D C; Rioja, S S; Potsch, M V; Pastura, M P; Marques, V D; Castier, M B; Marques, E A; Santos, K R N

2013-08-01

Staphylococcus aureus is the main causal pathogen of infective endocarditis (IE), which may have distinct origins, namely, community, nosocomial, or non-nosocomial healthcare-associated (NNHCA). We report the first case of NNHCA-IE caused by methicillin-resistant S. aureus strain USA400/SCCmec IV in which the combination therapy of rifampin and vancomycin had a favorable outcome for the patient.

Methicillin-resistant Staphylococcus aureus from dental school clinic surfaces and students.

PubMed

Roberts, Marilyn C; Soge, Olusegun O; Horst, Jeremy A; Ly, Kiet A; Milgrom, Peter

2011-10-01

Methicillin-resistant Staphylococcus aureus (MRSA) isolated from frequently touched dental school clinic surfaces were compared with MRSA isolated nasal cultures of dental students. Sixty-one dental students and 95 environmental surfaces from 7 clinics were sampled using SANICULT (Starplex Scientific Inc, Etobicoke, Ontario, Canada) swabs. Antimicrobial susceptibility testing was performed, and pulsed-field gel electrophoresis analysis, the mecA gene, multilocus sequence type, and SCCmec type were determined by polymerase chain reaction and sequencing. Thirteen (21%) dental students and 8 (8.4%) surfaces were MRSA positive. Three MRSA strains were SCCmec type IV, whereas 3 were nontypeable isolates and Panton-Valentine leukocidin positive (PVL+), and none were USA300. One surface and 1 student isolate shared the same multilocus sequence type ST 8 and were 75% related. Two groups of students carried the same MRSA strains. The MRSA-positive samples were from 4 of 7 dental clinics. In addition, 21% of the dental students carried MRSA, which is > 10 times higher than the general public and twice as frequent as in other university students. This is the first study to characterize MRSA from dental clinic surfaces and dental students and suggests that both may be reservoirs for MRSA. Further studies are needed to verify this premise. Copyright © 2011 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Genetic Variation among Staphylococcus aureus Strains from Bovine Milk and Their Relevance to Methicillin-Resistant Isolates from Humans ▿

PubMed Central

Hata, Eiji; Katsuda, Ken; Kobayashi, Hideki; Uchida, Ikuo; Tanaka, Kiyoshi; Eguchi, Masashi

2010-01-01

In genetic analysis of bovine Staphylococcus aureus isolates that are recognized as an important pathogenic bacterium in bovine mastitis, multilocus sequence typing (MLST) showed strong correlation to the results of pulsed-field gel electrophoresis, coa PCR-restriction fragment length polymorphism (RFLP), spa typing, and the coagulase serotyping method. According to MLST results, strains derived from sequence type 97 (ST97) and ST705 were suggested as not only dominant bovine S. aureus lineages in Japan but also pandemic bovine S. aureus lineages. Although both lineages seem to be distantly related to each other by phylogenetic analysis, both had common characteristics, i.e., lukM/lukF′-PV and coagulase serotype VI. These characteristics were very rare among minor bovine strains and human strains and may contribute to the host specificity of these lineages. Four methicillin-resistant S. aureus (MRSA) isolates were first confirmed from bovine milk in Japan; these isolates showed geno- and serotypes that were identical or similar to those of human MRSA isolates in Japan (ST5, staphylococcal cassette chromosome mec type II [SCCmec II], Spa type t002 or t375, and coagulase serotype II, and ST89, SCCmec IIIa, Spa type t5266, and coagulase serotype I). ST5 and ST89 are uncommon among bovine isolates in the world, whereas these STs are common among human MRSA isolates in Japan. PMID:20392913

Prevalence and characterization of methicillin-resistant Staphylococcus aureus carrying mecA or mecC and methicillin-susceptible Staphylococcus aureus in dairy sheep farms in central Italy.

PubMed

Giacinti, G; Carfora, V; Caprioli, A; Sagrafoli, D; Marri, N; Giangolini, G; Amoruso, R; Iurescia, M; Stravino, F; Dottarelli, S; Feltrin, F; Franco, A; Amatiste, S; Battisti, A

2017-10-01

Between January and May 2012, a total of 286 bulk tank milk samples from dairy sheep farms located in central Italy were tested for the presence of Staphylococcus aureus. One hundred fifty-three samples were positive for S. aureus (53.5%), with an average count of 2.53 log cfu/mL. A total of 679 S. aureus colonies were screened for methicillin resistance by the cefoxitin disk diffusion test, and 104 selected cefoxitin-susceptible isolates were also tested for their susceptibility to other antimicrobials representative of the most relevant classes active against Staphylococcus spp. by using the Kirby-Bauer disk diffusion method. Two methicillin-resistant Staphylococcus aureus (MRSA) isolates, carrying respectively the mecA and the mecC genes, were detected in 2 samples from 2 different farms (prevalence 0.7%). The mecA-positive MRSA isolate was blaZ positive, belonged to spa type t127, sequence type (ST)1, clonal complex (CC)1, carried a staphylococcal cassette chromosome mec (SCCmec) type IVa, and was phenotypically resistant to all the β-lactams tested and to erythromycin, streptomycin, kanamycin, and tetracycline. The mecC-positive MRSA isolate was negative for the chromosomally or plasmid-associated blaZ gene but positive for the blaZ allotype associated with SCCmec XI (blaZ-SCCmecXI), belonged to spa type 843, ST(CC)130, carried a SCCmec type XI, and was resistant only to β-lactams. Both MRSA were negative for the presence of specific immune-evasion and virulence genes such as those coding for the Panton-Valentine leucocidin, the toxic shock syndrome toxin 1, and the immune evasion cluster genes. Regarding the presence of the major S. aureus enterotoxin genes, the mecC-positive MRSA tested negative, whereas the ST (CC)1 mecA-positive MRSA harbored the seh gene. Among the 104 methicillin-susceptible S. aureus isolates examined for antimicrobial susceptibility, 63 (60.58%) were susceptible to all the antimicrobials tested, and 41 (39.42%) were resistant to at least 1 antimicrobial. In particular, 23 isolates (22.12%) were resistant to tetracycline, 16 (15.38%) to sulfonomides, 14 (13.46%) to trimethoprim and sulfamethoxazole, and 9 (8.65%) to ampicillin, whereas only 1 isolate was resistant to both fluoroquinolones and aminoglycosides. The high prevalence of S. aureus found in bulk tank milk samples and the isolation of MRSA, although at a low prevalence, underlines the importance of adopting control measures against S. aureus in dairy sheep farms to minimize the risks for animal and public health. Moreover, this study represents the first report of mecC-positive MRSA isolation in Italy and would confirm that, among livestock animals, sheep might act as a mecC-MRSA reservoir. Although this lineage seems to be rare in dairy sheep (0.35% of farms tested), because mecC-positive MRSA are difficult to detect by diagnostic routine methods employed for mecA-positive livestock-associated MRSA, diagnostic laboratories should be aware of the importance of searching for the mecC gene in all the mecA-negative S. aureus isolates displaying resistance to oxacillin, cefoxitin, or both. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Short communication: Characterization of methicillin-resistant Staphylococcus aureus isolated from raw milk fresh cheese in Colombia.

PubMed

Herrera, Fanny C; García-López, María-Luisa; Santos, Jesús A

2016-10-01

The aim of this study was the characterization of a collection of 8 methicillin-resistant Staphylococcus aureus (MRSA) isolates, obtained from samples of fresh cheese (Doble Crema) produced from raw cow milk in small dairies in Colombia. All the isolates harbored the mecA and Panton-Valentine leukocidin (PVL) genes, presented with SCCmec type IV, and belonged to multilocus sequence type 8 and spa type 024. Seven isolates presented 3 closely related pulsed-field gel electrophoresis profiles. Three of them carried the staphylococcal enterotoxin B gene. The isolates were resistant to cefoxitin, oxacillin, penicillin, and ampicillin and susceptible to all non-β-lactams antibiotics tested, with minimum inhibitory concentration values for oxacillin of 4 to 8mg/L. The isolates belonged to the community-acquired MRSA group, suggesting a human source of contamination. The risk of human infection by MRSA via contaminated foods is considered low, but contaminated food commodities can contribute to the worldwide dissemination of clones of community-acquired MRSA. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Frequent isolation of methicillin resistant Staphylococcus aureus (MRSA) ST398 among healthy pigs in Portugal.

PubMed

Conceição, Teresa; de Lencastre, Hermínia; Aires-de-Sousa, Marta

2017-01-01

Although livestock-associated ST398 methicillin-resistant Staphylococcus aureus (MRSA) has been widely reported in different geographic regions, MRSA carriage studies among healthy pigs in Portugal are very limited. In total, 101 swine nasal samples from two Portuguese farms were screened for MRSA. In addition five swine workers (including one veterinary and one engineer) and four household members were nasally screened. The isolates were characterized by spa typing, SCCmec typing and MLST. All isolates were tested for antimicrobial susceptibility, presence of mecA and mecC genes, and virulence determinants. MRSA prevalence in swine was 99% (100/101), 80% (4/5) in swine workers and 25% (1/4) in household members. All isolates belonged to ST398 distributed over two spa types-t011 (57%) and t108 (42%). SCCmec type V was present in most of the isolates (n = 95; 82%) while 21 isolates amplified the mecA gene only and were classified as nontypeable. The majority of the isolates were resistant to tetracycline (100%), clindamycin (97%), erythromycin (96%), chloramphenicol (84%) and gentamycin (69%). Notably, 12% showed resistance to quinupristin-dalfopristin (MICs 3-8 μg/mL). Beta-hemolysin (81%) and gamma-hemolysin (74%) were the unique virulence determinants detected. None of the isolates harboured PVL or mecC gene. This study showed a massive occurrence of ST398-MRSA in two independent swine farms, highlighting its establishment among healthy pigs in Portugal.

Diversity of methicillin-resistant Staphylococcus aureus CC22-MRSA-IV from Saudi Arabia and the Gulf region.

PubMed

Senok, Abiola; Somily, Ali; Raji, Adeola; Gawlik, Darius; Al-Shahrani, Fatimah; Baqi, Shehla; Boswihi, Samar; Skakni, Leila; Udo, Edet E; Weber, Stefan; Ehricht, Ralf; Monecke, Stefan

2016-10-01

CC22-MRSA-IV, UK-EMRSA-15/Barnim EMRSA, is a common and pandemic strain of methicillin-resistant Staphylococcus aureus (MRSA) that has been found mainly in Western Europe, but also in other parts of the world including some Gulf countries. One suspected case of an infection with this strain in a patient who was admitted to the surgical unit in Riyadh, Kingdom of Saudi Arabia (KSA) was investigated in order to check whether this strain has reached KSA. Besides the index isolate, 46 additional isolates of CC22-MRSA-IV from patients from KSA, Abu Dhabi, Kuwait, and Germany (patients with a history of travel in the Middle East), were characterized by microarray hybridization. The study revealed a regional presence of as many as six distinct 'strains' of CC22-MRSA-IV that could be distinguished based on carriage of SCCmec IV subtypes and virulence factors. No true UK-EMRSA-15/Barnim EMRSA was identified in Riyadh; all suspected isolates from Riyadh were assigned to other, albeit related strains. However, this strain was identified in Abu Dhabi and Kuwait. CC22-MRSA-IV from KSA could be linked to other epidemic strains from the Middle East and possibly India, rather than to the Western European UK-EMRSA-15/Barnim EMRSA. High-resolution typing methods, including SCCmec subtyping, might help to differentiate related epidemic strains and to monitor routes of transmission. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

High Prevalence of Multidrug-Resistant Community-Acquired Methicillin-Resistant Staphylococcus aureus at the Largest Veterinary Teaching Hospital in Costa Rica.

PubMed

Rojas, Irene; Barquero-Calvo, Elías; van Balen, Joany C; Rojas, Norman; Muñoz-Vargas, Lohendy; Hoet, Armando E

2017-09-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a pathogen associated with severe infections in companion animals present in the community, and it is diagnosed in animals admitted to veterinary hospitals. However, reports that describe the circulation of MRSA in animal populations and veterinary settings in Latin America are scarce. Therefore, the objective of this study was to determine the prevalence and investigate the molecular epidemiology of MRSA in the environment of the largest veterinary teaching hospital in Costa Rica. Preselected contact surfaces were sampled twice within a 6-week period. Antimicrobial resistance, SCCmec type, Panton-Valentine leukocidin screening, USA type, and clonality were assessed in all recovered isolates. Overall, MRSA was isolated from 26.5% (27/102) of the surfaces sampled, with doors, desks, and examination tables most frequently contaminated. Molecular analysis demonstrated a variety of surfaces from different sections of the hospital contaminated by three highly related clones/pulsotypes. All, but one of the isolates were characterized as multidrug-resistant SCCmec type IV-USA700, a strain sporadically described in other countries and often classified as community acquired. The detection and frequency of this unique strain in this veterinary setting suggest Costa Rica has a distinctive MRSA ecology when compared with other countries/regions. The high level of environmental contamination highlights the necessity to establish and enforce standard cleaning and disinfection protocols to minimize further spread of this pathogen and reduce the risk of nosocomial and/or occupational transmission of MRSA.

Healthcare- and Community-Associated Methicillin-Resistant Staphylococcus aureus (MRSA) and Fatal Pneumonia with Pediatric Deaths in Krasnoyarsk, Siberian Russia: Unique MRSA's Multiple Virulence Factors, Genome, and Stepwise Evolution

PubMed Central

Khokhlova, Olga E.; Hung, Wei-Chun; Wan, Tsai-Wen; Iwao, Yasuhisa; Takano, Tomomi; Higuchi, Wataru; Yachenko, Svetlana V.; Teplyakova, Olga V.; Kamshilova, Vera V.; Kotlovsky, Yuri V.; Nishiyama, Akihito; Reva, Ivan V.; Sidorenko, Sergey V.; Peryanova, Olga V.; Reva, Galina V.; Teng, Lee-Jene; Salmina, Alla B.; Yamamoto, Tatsuo

2015-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a common multidrug-resistant (MDR) pathogen. We herein discussed MRSA and its infections in Krasnoyarsk, Siberian Russia between 2007 and 2011. The incidence of MRSA in 3,662 subjects was 22.0% and 2.9% for healthcare- and community-associated MRSA (HA- and CA-MRSA), respectively. The 15-day mortality rates for MRSA hospital- and community-acquired pneumonia (HAP and CAP) were 6.5% and 50%, respectively. MRSA CAP cases included pediatric deaths; of the MRSA pneumonia episodes available, ≥27.3% were associated with bacteremia. Most cases of HA-MRSA examined exhibited ST239/spa3(t037)/SCCmecIII.1.1.2 (designated as ST239Kras), while all CA-MRSA cases examined were ST8/spa1(t008)/SCCmecIV.3.1.1(IVc) (designated as ST8Kras). ST239Kras and ST8Kras strongly expressed cytolytic peptide (phenol-soluble modulin α, PSMα; and δ-hemolysin, Hld) genes, similar to CA-MRSA. ST239Kras pneumonia may have been attributed to a unique set of multiple virulence factors (MVFs): toxic shock syndrome toxin-1 (TSST-1), elevated PSMα/Hld expression, α-hemolysin, the staphylococcal enterotoxin SEK/SEQ, the immune evasion factor SCIN/SAK, and collagen adhesin. Regarding ST8Kras, SEA was included in MVFs, some of which were common to ST239Kras. The ST239Kras (strain OC3) genome contained: a completely unique phage, φSa7-like (W), with no att repetition; S. aureus pathogenicity island SaPI2R, the first TSST-1 gene-positive (tst +) SaPI in the ST239 lineage; and a super copy of IS256 (≥22 copies/genome). ST239Kras carried the Brazilian SCCmecIII.1.1.2 and United Kingdom-type tst. ST239Kras and ST8Kras were MDR, with the same levofloxacin resistance mutations; small, but transmissible chloramphenicol resistance plasmids spread widely enough to not be ignored. These results suggest that novel MDR and MVF+ HA- and CA-MRSA (ST239Kras and ST8Kras) emerged in Siberian Russia (Krasnoyarsk) associated with fatal pneumonia, and also with ST239Kras, a new (Siberian Russian) clade of the ST239 lineage, which was created through stepwise evolution during its potential transmission route of Brazil-Europe-Russia/Krasnoyarsk, thereby selective advantages from unique MVFs and the MDR. PMID:26047024

Clinical and molecular epidemiology of community-acquired methicillin-resistant Staphylococcus aureus infections among children with risk factors for health care-associated infection: 2001-2003.

PubMed

Zaoutis, Theoklis E; Toltzis, Philip; Chu, Jaclyn; Abrams, Tara; Dul, Michael; Kim, Jason; McGowan, Karin L; Coffin, Susan E

2006-04-01

Methicillin-resistant Staphylococcus aureus (MRSA) has recently emerged as a common cause of infection in children in many parts of the world. The epidemiology of community-acquired MRSA (CA-MRSA) among healthy children has been recently described. However, little is known about CA-MRSA in children with underlying medical conditions. To compare the clinical and molecular epidemiology of CA-MRSA in children with and without risk factors for health care-associated infections (RF-HAI). We conducted a 3-year retrospective cohort study of children with CA-MRSA infection. RF-HAI, including hospitalization within the past year, indwelling medical devices or chronic medical condition, were identified by chart review. Genetic relatedness of CA-MRSA strains was assessed by pulsed field gel electrophoresis. Polymerase chain reaction was used to detect Panton-Valentine leukocidin and determine staphylococcal chromosomal cassette carrying the mecA methicillin-resistant gene (SCCmec) type. We identified 446 episodes of community-acquired S. aureus infections, of which 134 (30%) were caused by MRSA. During the 3-year study period, the proportion of S. aureus infections caused by MRSA rose from 15% (12 of 80) to 40% (93 of 235) (P < 0.001) with the increase noted predominately in children with skin and soft tissue infections. RF-HAI were identified in 56 (42%) patients with CA-MRSA. Among subjects with CA-MRSA, children with RF-HAI were more likely to have had an invasive infection than healthy children (32% versus 5%; P < 0.001). CA-MRSA isolates from children with RF-HAI were similar to those without RF-HAI; all laboratory-retained CA-MRSA isolates harbored the SCCmec type IV cassette, and almost all isolates were susceptible to trimethoprim-sulfamethoxazole and clindamycin. However, pulsed field gel electrophoresis revealed greater molecular diversity among CA-MRSA isolates recovered from children with RF-HAI compared with those from otherwise healthy children (P = 0.001). Additionally CA-MRSA isolates from children with RF-HAI were less likely to contain sequences for Panton-Valentine leukocidin (P < 0.001) and more likely to be resistant to 3 or more classes of antibiotics (P = 0.033). CA-MRSA strains recovered from children with RF-HAI were phenotypically similar to those recovered from healthy children The absence of SCCmec type II or III MRSA among children with RF-HAI suggests that CA-MRSA strains might have become endemic within pediatric health care facilities.

Carriage frequency, phenotypic, and genotypic characteristics of methicillin-resistant Staphylococcus aureus isolated from dental health-care personnel, patients, and environment.

PubMed

Khairalla, Ahmed S; Wasfi, Reham; Ashour, Hossam M

2017-08-07

There is limited data on methicillin-resistant Staphylococcus aureus (MRSA) carriage in dental clinics. 1300 specimens from patients, health personnel, and environmental surfaces of a dental clinic in Egypt were tested for MRSA. Antibiotic susceptibility, biofilm formation, Staphylococcal protein A (spa) typing, SCCmec typing, and PCR-based assays were used to detect mecA, mecC, vanA, Panton-Valentine Leukocidin toxin (PVL), and toxic shock syndrome toxin-1 (tst) genes. Among 34 mecA-positive MRSA isolates, five (14.7%) were PVL-positive, seventeen (50%) were tst-positive, ten (29.4%) were vanA-positive, while none harboured mecC. MRSA hand carriage rates in patients, nurses, and dentists were 9.8%, 6.6%, and 5%. The respective nasal colonization rates were 11.1%, 6.7%, and 9.7%. 1.3% of the environmental isolates were MRSA-positive. Strong and moderate biofilm-forming isolates represented 23.5% and 29.4% of MRSA isolates. 24 MRSA isolates (70.6%) were multi-resistant and 18 (52.9%) harboured SCCmec IV. Among eight spa types, t223 (26.5%), t267 (23.5%), and t14339 (23.5%) were predominant. We noted an alarming genetic relatedness between 7 (20.6%) MRSA isolates and the epidemic EMRSA-15 clone, as well as a combined occurrence of tst and PVL in 3 (8.8%) isolates. Results suggest high MRSA pathogenicity in dental wards highlighting the need for more efficient surveillance/infection control strategies.

Molecular characterisation of methicillin-resistant Staphylococcus aureus (MRSA) isolated at a large referral hospital in Zambia.

PubMed

Samutela, Mulemba Tillika; Kalonda, Annie; Mwansa, James; Lukwesa-Musyani, Chileshe; Mwaba, John; Mumbula, Enoch Mulowa; Mwenya, Darlington; Simulundu, Edgar; Kwenda, Geoffrey

2017-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is globally recognized as an important public health problem. Whereas comprehensive molecular typing data of MRSA strains is available, particularly in Europe, North America and Australia, similar information is very limited in sub-Saharan Africa including Zambia. In this study, thirty two clinical isolates of Staphylococcus aureus , collected at a large referral hospital in Lusaka, Zambia between June 2009 and December 2012 were analysed by Staphylococcal cassette chromosome mec (SCCmec), Staphylococcus protein A gene typing (spa) and detection of the Panton-Valentine Leukocidin genes (pvl) . Three SCC mec types were identified namely SCC mec type IV (65.6%), SCCmec type III (21.9%), SCC mec type I (3.1%). Nine point four percent (9.4%) of the isolates were untypable. Five spa types, which included a novel type, were detected and the most prevalent spa type was t064 (40.6%). Other spa types included spa types t2104 (31.3%), t355 (3.1%) and t1257 (21.9%). The pvl genes were detected in 3 out of 32 isolates. These molecular typing data indicated that the MRSA strains collected in Lusaka were diverse. Although the source of these MRSA was not established, these results stress the need for assessing infection prevention and control procedures at this health-care facility in order to curtail possible nosocomial infections. Furthermore, country-wide surveillance of MRSA in both the community and health-care facilities is recommended for infection prevention and control. To our knowledge, this represents the first study to characterise MRSA using molecular tools in Zambia.

High Prevalence of Multidrug-Resistant Community-Acquired Methicillin-Resistant Staphylococcus aureus at the Largest Veterinary Teaching Hospital in Costa Rica

PubMed Central

Rojas, Irene; Barquero-Calvo, Elías; van Balen, Joany C.; Rojas, Norman; Muñoz-Vargas, Lohendy

2017-01-01

Abstract Methicillin-resistant Staphylococcus aureus (MRSA) is a pathogen associated with severe infections in companion animals present in the community, and it is diagnosed in animals admitted to veterinary hospitals. However, reports that describe the circulation of MRSA in animal populations and veterinary settings in Latin America are scarce. Therefore, the objective of this study was to determine the prevalence and investigate the molecular epidemiology of MRSA in the environment of the largest veterinary teaching hospital in Costa Rica. Preselected contact surfaces were sampled twice within a 6-week period. Antimicrobial resistance, SCCmec type, Panton-Valentine leukocidin screening, USA type, and clonality were assessed in all recovered isolates. Overall, MRSA was isolated from 26.5% (27/102) of the surfaces sampled, with doors, desks, and examination tables most frequently contaminated. Molecular analysis demonstrated a variety of surfaces from different sections of the hospital contaminated by three highly related clones/pulsotypes. All, but one of the isolates were characterized as multidrug-resistant SCCmec type IV-USA700, a strain sporadically described in other countries and often classified as community acquired. The detection and frequency of this unique strain in this veterinary setting suggest Costa Rica has a distinctive MRSA ecology when compared with other countries/regions. The high level of environmental contamination highlights the necessity to establish and enforce standard cleaning and disinfection protocols to minimize further spread of this pathogen and reduce the risk of nosocomial and/or occupational transmission of MRSA. PMID:28816638

Meticillin-resistant Staphylococcus aureus with a novel mecA homologue in human and bovine populations in the UK and Denmark: a descriptive study

PubMed Central

García-Álvarez, Laura; Holden, Matthew TG; Lindsay, Heather; Webb, Cerian R; Brown, Derek FJ; Curran, Martin D; Walpole, Enid; Brooks, Karen; Pickard, Derek J; Teale, Christopher; Parkhill, Julian; Bentley, Stephen D; Edwards, Giles F; Girvan, E Kirsty; Kearns, Angela M; Pichon, Bruno; Hill, Robert LR; Larsen, Anders Rhod; Skov, Robert L; Peacock, Sharon J; Maskell, Duncan J; Holmes, Mark A

2011-01-01

Summary Background Animals can act as a reservoir and source for the emergence of novel meticillin-resistant Staphylococcus aureus (MRSA) clones in human beings. Here, we report the discovery of a strain of S aureus (LGA251) isolated from bulk milk that was phenotypically resistant to meticillin but tested negative for the mecA gene and a preliminary investigation of the extent to which such strains are present in bovine and human populations. Methods Isolates of bovine MRSA were obtained from the Veterinary Laboratories Agency in the UK, and isolates of human MRSA were obtained from diagnostic or reference laboratories (two in the UK and one in Denmark). From these collections, we searched for mecA PCR-negative bovine and human S aureus isolates showing phenotypic meticillin resistance. We used whole-genome sequencing to establish the genetic basis for the observed antibiotic resistance. Findings A divergent mecA homologue (mecALGA251) was discovered in the LGA251 genome located in a novel staphylococcal cassette chromosome mec element, designated type-XI SCCmec. The mecALGA251 was 70% identical to S aureus mecA homologues and was initially detected in 15 S aureus isolates from dairy cattle in England. These isolates were from three different multilocus sequence type lineages (CC130, CC705, and ST425); spa type t843 (associated with CC130) was identified in 60% of bovine isolates. When human mecA-negative MRSA isolates were tested, the mecALGA251 homologue was identified in 12 of 16 isolates from Scotland, 15 of 26 from England, and 24 of 32 from Denmark. As in cows, t843 was the most common spa type detected in human beings. Interpretation Although routine culture and antimicrobial susceptibility testing will identify S aureus isolates with this novel mecA homologue as meticillin resistant, present confirmatory methods will not identify them as MRSA. New diagnostic guidelines for the detection of MRSA should consider the inclusion of tests for mecALGA251. Funding Department for Environment, Food and Rural Affairs, Higher Education Funding Council for England, Isaac Newton Trust (University of Cambridge), and the Wellcome Trust. PMID:21641281

A horizontally gene transferred copper resistance locus confers hyper‐resistance to antibacterial copper toxicity and enables survival of community acquired methicillin resistant Staphylococcus aureus USA300 in macrophages

PubMed Central

Purves, Joanne; Thomas, Jamie; Riboldi, Gustavo P.; Zapotoczna, Marta; Tarrant, Emma; Andrew, Peter W.; Londoño, Alejandra; Planet, Paul J.; Geoghegan, Joan A.; Waldron, Kevin J.

2018-01-01

Summary Excess copper is highly toxic and forms part of the host innate immune system's antibacterial arsenal, accumulating at sites of infection and acting within macrophages to kill engulfed pathogens. We show for the first time that a novel, horizontally gene transferred copper resistance locus (copXL), uniquely associated with the SCCmec elements of the highly virulent, epidemic, community acquired methicillin resistant Staphylococcus aureus (CA‐MRSA) USA300, confers copper hyper‐resistance. These genes are additional to existing core genome copper resistance mechanisms, and are not found in typical S. aureus lineages, but are increasingly identified in emerging pathogenic isolates. Our data show that CopX, a putative P1B‐3‐ATPase efflux transporter, and CopL, a novel lipoprotein, confer copper hyper‐resistance compared to typical S. aureus strains. The copXL genes form an operon that is tightly repressed in low copper environments by the copper regulator CsoR. Significantly, CopX and CopL are important for S. aureus USA300 intracellular survival within macrophages. Therefore, the emergence of new S. aureus clones with the copXL locus has significant implications for public health because these genes confer increased resistance to antibacterial copper toxicity, enhancing bacterial fitness by altering S. aureus interaction with innate immunity. PMID:29521441

Antimicrobial resistance and virulence genes profiling of methicillin-resistant Staphylococcus aureus isolates in a burn center: A 5-year study.

PubMed

Jiang, Bei; Yin, Supeng; You, Bo; Gong, Yali; Huang, Guangtao; Yang, Zichen; Zhang, Yulong; Chen, Yu; Chen, Jing; Yuan, Zhiqiang; Hu, Xiaomei; Peng, Yizhi

2018-01-01

Methicillin-resistant S. aureus (MRSA) has attracted more and more attention in recent years, especially in burn medical centers. Here we conducted a 5-year period study to evaluate the MRSA infection in our burn center. The staphylococcal chromosomal cassette mec (SCCmec) typing, antimicrobials susceptibility and virulence profiles were also performed among the MRSA isolates. Of the 259 S. aureus isolates, 239 (92.28%) isolates were identified as MRSA. A decreased trend of MRSA isolation rate over time was found (P = 0.0063). Majority of MRSA isolates in our center belonged to SCCmec type III (230/239, 96.23%). Antimicrobials susceptibility tests of the MRSA isolates revealed significantly decreased resistance to clindamycin (P = 0.0183), and increased resistance to chloramphenicol (P = 0.0020) and minocycline (P < 0.0001) over time. Trimethoprim/sulfamethoxazole, clindamycin, vancomycin, teicoplanin and linezolid were suggested to be good choice for MRSA infection in our center. Virulence factors profiling showed that most of MRSA isolates in our center carried the virulence factor pattern of cna-clfA-clfB-eno-fib-icaA-icaD-sea-psmα-lukED-hlg-hlgv-hla-hld (214/239, 89.54%). In conclusion, our study suggests that MRSA infection is serious in our burn center, but presented decreased trend over time. Most of MRSA isolates in our center presented the same virulence factor profile. More attention should be attached to nosocomial infection in burn medical center. Antimicrobials susceptibility changing over time was observed. Antimicrobials susceptibility monitoring is necessary and helps to select appropriate drugs against MRSA infections. Copyright © 2017. Published by Elsevier Ltd.

A Prospective Cohort Multicenter Study of Molecular Epidemiology and Phylogenomics of Staphylococcus aureus Bacteremia in Nine Latin American Countries

PubMed Central

Reyes, Jinnethe; Carvajal, Lina Paola; Rincon, Sandra; Diaz, Lorena; Panesso, Diana; Ibarra, Gabriel; Rios, Rafael; Munita, Jose M.; Salles, Mauro J.; Alvarez-Moreno, Carlos; Labarca, Jaime; Garcia, Coralith; Luna, Carlos M.; Mejia-Villatoro, Carlos; Zurita, Jeannete; Guzman-Blanco, Manuel; Rodriguez-Noriega, Eduardo; Narechania, Apurva; Rojas, Laura J.; Planet, Paul J.; Weinstock, George M.; Gotuzzo, Eduardo; Seas, Carlos

2017-01-01

ABSTRACT Staphylococcus aureus is an important pathogen causing a spectrum of diseases ranging from mild skin and soft tissue infections to life-threatening conditions. Bloodstream infections are particularly important, and the treatment approach is complicated by the presence of methicillin-resistant S. aureus (MRSA) isolates. The emergence of new genetic lineages of MRSA has occurred in Latin America (LA) with the rise and dissemination of the community-associated USA300 Latin American variant (USA300-LV). Here, we prospectively characterized bloodstream MRSA recovered from selected hospitals in 9 Latin American countries. All isolates were typed by pulsed-field gel electrophoresis (PFGE) and subjected to antibiotic susceptibility testing. Whole-genome sequencing was performed on 96 MRSA representatives. MRSA represented 45% of all (1,185 S. aureus) isolates. The majority of MRSA isolates belonged to clonal cluster (CC) 5. In Colombia and Ecuador, most isolates (≥72%) belonged to the USA300-LV lineage (CC8). Phylogenetic reconstructions indicated that MRSA isolates from participating hospitals belonged to three major clades. Clade A grouped isolates with sequence type 5 (ST5), ST105, and ST1011 (mostly staphylococcal chromosomal cassette mec [SCCmec] I and II). Clade B included ST8, ST88, ST97, and ST72 strains (SCCmec IV, subtypes a, b, and c/E), and clade C grouped mostly Argentinian MRSA belonging to ST30. In summary, CC5 MRSA was prevalent in bloodstream infections in LA with the exception of Colombia and Ecuador, where USA300-LV is now the dominant lineage. Clonal replacement appears to be a common phenomenon, and continuous surveillance is crucial to identify changes in the molecular epidemiology of MRSA. PMID:28760895

Methicillin-Resistant Staphylococcus aureus (MRSA) Detected at Four U.S. Wastewater Treatment Plants

PubMed Central

Goldstein, Rachel E. Rosenberg; Micallef, Shirley A.; Gibbs, Shawn G.; Davis, Johnnie A.; He, Xin; George, Ashish; Kleinfelter, Lara M.; Schreiber, Nicole A.; Mukherjee, Sampa; Joseph, Sam W.

2012-01-01

Background: The incidence of community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) infections is increasing in the United States, and it is possible that municipal wastewater could be a reservoir of this microorganism. To date, no U.S. studies have evaluated the occurrence of MRSA in wastewater. Objective: We examined the occurrence of MRSA and methicillin-susceptible S. aureus (MSSA) at U.S. wastewater treatment plants. Methods: We collected wastewater samples from two Mid-Atlantic and two Midwest wastewater treatment plants between October 2009 and October 2010. Samples were analyzed for MRSA and MSSA using membrane filtration. Isolates were confirmed using biochemical tests and PCR (polymerase chain reaction). Antimicrobial susceptibility testing was performed by Sensititre® microbroth dilution. Staphylococcal cassette chromosome mec (SCCmec) typing, Panton-Valentine leucocidin (PVL) screening, and pulsed field gel electrophoresis (PFGE) were performed to further characterize the strains. Data were analyzed by two-sample proportion tests and analysis of variance. Results: We detected MRSA (n = 240) and MSSA (n = 119) in 22 of 44 (50%) and 24 of 44 (55%) wastewater samples, respectively. The odds of samples being MRSA-positive decreased as treatment progressed: 10 of 12 (83%) influent samples were MRSA-positive, while only one of 12 (8%) effluent samples was MRSA-positive. Ninety-three percent and 29% of unique MRSA and MSSA isolates, respectively, were multidrug resistant. SCCmec types II and IV, the pvl gene, and USA types 100, 300, and 700 (PFGE strain types commonly found in the United States) were identified among the MRSA isolates. Conclusions: Our findings raise potential public health concerns for wastewater treatment plant workers and individuals exposed to reclaimed wastewater. Because of increasing use of reclaimed wastewater, further study is needed to evaluate the risk of exposure to antibiotic-resistant bacteria in treated wastewater. PMID:23124279

Community-acquired methicillin-resistant Staphylococcus aureus: community transmission, pathogenesis, and drug resistance.

PubMed

Yamamoto, Tatsuo; Nishiyama, Akihito; Takano, Tomomi; Yabe, Shizuka; Higuchi, Wataru; Razvina, Olga; Shi, Da

2010-08-01

Methicillin-resistant Staphylococcus aureus (MRSA) is able to persist not only in hospitals (with a high level of antimicrobial agent use) but also in the community (with a low level of antimicrobial agent use). The former is called hospital-acquired MRSA (HA-MRSA) and the latter community-acquired MRSA (CA-MRSA). It is believed MRSA clones are generated from S. aureus through insertion of the staphylococcal cassette chromosome mec (SCCmec), and outbreaks occur as they spread. Several worldwide and regional clones have been identified, and their epidemiological, clinical, and genetic characteristics have been described. CA-MRSA is likely able to survive in the community because of suitable SCCmec types (type IV or V), a clone-specific colonization/infection nature, toxin profiles (including Pantone-Valentine leucocidin, PVL), and narrow drug resistance patterns. CA-MRSA infections are generally seen in healthy children or young athletes, with unexpected cases of diseases, and also in elderly inpatients, occasionally surprising clinicians used to HA-MRSA infections. CA-MRSA spreads within families and close-contact groups or even through public transport, demonstrating transmission cores. Re-infection (including multifocal infection) frequently occurs, if the cores are not sought out and properly eradicated. Recently, attention has been given to CA-MRSA (USA300), which originated in the US, and is growing as HA-MRSA and also as a worldwide clone. CA-MRSA infection in influenza season has increasingly been noted as well. MRSA is also found in farm and companion animals, and has occasionally transferred to humans. As such, the epidemiological, clinical, and genetic behavior of CA-MRSA, a growing threat, is focused on in this study.

Contamination of public transports by Staphylococcus aureus and its carriage by biomedical students: point-prevalence, related risk factors and molecular characterization of methicillin-resistant strains.

PubMed

Mendes, Â; Martins da Costa, P; Rego, D; Beça, N; Alves, C; Moreira, T; Conceição, T; Aires-de-Sousa, M

2015-08-01

To analyse the contamination of public transports by Staphylococcus aureus and assess its carriage by biomedical students, focussing on the point-prevalence, related risk factors and molecular characterization of methicillin-resistant strains. Cross-sectional survey. Methicillin-resistant S. aureus (MRSA) and methicillin-sensitive S. aureus (MSSA) isolated from handrails of buses (n = 112) and trains (n = 79) circulating in Porto and from nasal swabs of local university students (n = 475) were quantified, characterized by molecular typing methods and related to possible risk factors. The MRSA prevalence in buses (16.1%) was not significantly different from trains (8.9%). There was also no identifiable association between the counts of MSSA and MRSA in buses and trains and the number of travellers in each sampling day, specific routes (including those passing by main hospitals) or other risk factors. Of the students, 37.1% carried S. aureus, and having a part-time job or smoking were found to be risk factors for carriage. EMRSA-15 (ST22-SCCmecIVh) was the prevalent MRSA clonal lineage, found not only in the buses (n = 14) and trains (n = 2) but also in the single MRSA-carrier among the students. The characteristics of the community-associated Southwest Pacific MRSA clone were found in a single ST30-IVa isolate, which may suggest a recent SCCmec acquisition by an MSSA background in the community. The spread of EMRSA-15, a common hospital-associated lineage, among different public transports and as a nasal coloniser is of concern and warrants adequate public health control measures. Copyright © 2015 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Clinical features and molecular characteristics of childhood community-associated methicillin-resistant Staphylococcus aureus infection in a medical center in northern Taiwan, 2012.

PubMed

Wang, Hong-Kai; Huang, Chun-Yen; Huang, Yhu-Chering

2017-07-05

Since first reported in 2002, the rate of methicillin-resistant Staphylococcus aureus (MRSA) among childhood community-associated (CA) S. aureus infection in Taiwan increased significantly up to 2005. There have been no reports on this issue since then. We prospectively collected clinical S. aureus isolates from the patients <19 years of age in a university-affiliated hospital in 2012. Only first isolate from each patient was included. The medical records were retrospectively reviewed and the patients were classified as CA or healthcare-associated (HA) by the standard epidemiologic criteria. Isolates as CA-MRSA were further characterized by pulsed-field gel electrophoresis, staphylococcal cassette chromosome (SCCmec) typing, and multilocus sequence typing. A total of 409 S. aureus isolates were included, and 260 (63.6%) were MRSA. The proportion of MRSA among all S. aureus isolates in 2012 increased significantly (p < 0.001) compared to that in 2004-2005. Of the 181 CA-MRSA isolates, 86.2% were identified from pus or wound. Nine pulsotypes were identified with two major types (type D, 119 (65.7%); type C, 27 (14.9%). Most of the isolates carried either SCCmec IV (66 isolates, 36%) or V T (112 isolates, 62%). 128 isolates (71%) carried Panton-Valentine leukocidin (PVL) genes. Clonal complex (CC) 59 accounted for 146 isolates (80.7%) of two major pulsotypes, CC45 for 19 isolates, ST30 for 6 isolates and ST8 (USA 300) for 4 isolates. In addition to penicillin (100%), most isolates were resistant to erythromycin (81%) and clindamycin (79.3%). Around two-thirds of childhood community-associated S. aureus infections in northern Taiwan were MRSA. Though CC59 is still the prevalent community clone, several new clones emerged in northern Taiwan.

Foods from black market at EU border as a neglected route of potential methicillin-resistant Staphylococcus aureus transmission.

PubMed

Oniciuc, Elena-Alexandra; Ariza-Miguel, Jaime; Bolocan, Andrei-Sorin; Diez-Valcarce, Marta; Rovira, Jordi; Hernández, Marta; Fernández-Natal, Isabel; Nicolau, Anca Ioana; Rodríguez-Lázaro, David

2015-09-16

The illegal entrance of foods to EU through black markets at the EU borders can constitute a neglected route of dissemination of foodborne pathogens, and in particular of methicillin-resistant Staphylococcus aureus (MRSA). In this study, we have assessed the presence of MRSA in foods sold in a black market at an EU border (the southeast part of Romania, on the border with Republic of Moldavia). We performed a search for MRSA among 200 food samples collected from 2012 to 2013. All S. aureus were studied by pulsed-field gel electrophoresis (PFGE) and antimicrobial susceptibility testing. MRSA isolates were further characterized by multilocus sequence typing (MLST) and SCCmec typing, and tested for the presence of Panton-Valentine leukocidin (PVL) virulence factors. Overall, 32 S. aureus isolates were recovered from 16 food samples (8%). One isolate detected in a pork lard sample was MRSA (0.5%). PFGE with the restriction enzyme SmaI revealed 12 genotypes among the 32 S. aureus isolates. The MRSA isolate belonged to sequence type 398, harbored SCCmec type V, tested negative for the presence of the PVL genes and was resistant to ciprofloxacin, tetracycline and cefazolin, besides all β-lactams. Among 31 methicillin-sensitive S. aureus (MSSA), 29% were resistant to penicillin, 9.7% to tetracycline and 3.2% to ciprofloxacin. In conclusion, in this study we report the presence of livestock-associated MRSA in foods sold in a black market at an EU border: ST398-MRSA-V. These results confirm the potential role of food in the dissemination of MRSA lineages among population, and the potential role of illegally introduced food to EU in the prevalence and evolution of MRSA clones in the community. Copyright © 2014 Elsevier B.V. All rights reserved.

Characterization of Ocular Methicillin-Resistant Staphylococcus epidermidis Isolates Belonging Predominantly to Clonal Complex 2 Subcluster II

PubMed Central

Hofling-Lima, Ana Luisa; Pignatari, Antonio C. C.

2014-01-01

Staphylococcus epidermidis is an abundant member of the microbiota of the human skin and wet mucosa, which is commonly associated with sight-threatening infections in eyes with predisposing factors. Ocular S. epidermidis has become notorious because of its capability to form biofilms on different ocular devices and due to the evolving rates of antimicrobial resistance. In this study, the molecular epidemiology of 30 ocular methicillin-resistant S. epidermidis (MRSE) isolates was assessed using multilocus sequence typing (MLST). Antimicrobial resistance, accessory gene-regulator and staphylococcal cassette chromosome mec (SCCmec) types, biofilm formation, and the occurrence of biofilm-associated genes were correlated with MLST clonal complexes. Sequence types (STs) frequently found in the hospital setting were rarely found in our collection. Overall, 12 different STs were detected with a predominance of ST59 (30%), ST5 and ST6 (13.3% each). Most of the isolates (93.3%) belonged to the clonal complex 2 (CC2) and grouped mainly within subcluster CC2-II (92.9%). Isolates grouped within this subcluster were frequently biofilm producers (92.3%) with a higher occurrence of the aap (84.5%) and bhp (46.1%) genes compared to icaA (19.2%). SCCmec type IV (53.8%) was predominant within CC2-II strains, while 38.4% were nontypeable. In addition, CC2-II strains were frequently multidrug resistant (80.7%) and demonstrated to be particularly resistant to ciprofloxacin (80.8%), ofloxacin (77%), azithromycin (61.5%), and gentamicin (57.7%). Our findings demonstrate the predominance of a particular MRSE cluster causing ocular infections, which was associated with high rates of antimicrobial resistance and particularly the carriage of biofilm-related genes coding for proteinaceous factors implicated in biofilm accumulation. PMID:24523473

Antimicrobial resistance and population structure of Staphylococcus epidermidis recovered from animals and humans.

PubMed

Argudín, M Angeles; Vanderhaeghen, Wannes; Vandendriessche, Stien; Vandecandelaere, Ilse; André, François-Xavier; Denis, Olivier; Coenye, Tom; Butaye, Patrick

2015-07-09

While Staphylococcus epidermidis, as part of the commensal flora, is a well-known human opportunistic pathogen, only little is known about the genetic relatedness of S. epidermidis carriage isolates from animal and human origin. This study aimed to compare S. epidermidis recovered from livestock, livestock-farmers and humans associated with the hospital environment. A total of 193 S. epidermidis isolates from three populations [animals (n=33), farmers (n=86) and hospital-associated (n=74)] were characterized by broth microdilution antimicrobial susceptibility testing, staphylococcal cassette chromosome mec (SCCmec) typing, pulsed field gel electrophoresis (PFGE) and multilocus sequence typing (MLST). The overall S. epidermidis nasal colonization rate was low in animals (1-9%) but high among farmers (75%). High levels of multi-resistance were found in all populations. Tetracycline resistance was high in animal and farmer isolates; resistance to erythromycin, clindamycin and trimethoprim was high in animal and hospital-associated isolates. Methicillin-resistant S. epidermidis - MRSE isolates were found in all collections, with 22 (67%) MRSE in animals, 44 (51%) MRSE in farmers and 42 (57%) MRSE associated with the hospital-setting. Known SCCmec types and variants were detected in 79% of MRSE; the rest were non-typeable cassettes. In total 79 PFGE-types were found, of which 22 were shared between livestock, farmers and the hospital settings. Clonal complex 2 was predominant in all three populations and most STs corresponded to types previously observed in community and nosocomial S. epidermidis populations. S. epidermidis isolates from livestock, farmers and hospital-setting showed a high level of diversity, but some clones can be found in humans as well as in animals. Copyright © 2015 Elsevier B.V. All rights reserved.

Molecular characteristics of methicillin-resistant Staphylococcus aureus nasal carriage from hospitalized patients and medical staff in Isfahan, Iran.

PubMed

Moshtagheian, S; Halaji, M; Sedaghat, H; Shahin, M; Esfahani, B N; Havaei, S R; Havaei, S A

2018-01-01

Nasal carriage of methicillin-resistant Staphylococcus aureus (MRSA) has been accounted as one of the main risk factors for the development of complicated nosocomial infections. The present study aimed to determine nasal carriage rate, antimicrobial susceptibility pattern and molecular characteristics of MRSA isolates. This cross-sectional study was performed within 6 months period from July 2015 at 3 hospitals of Isfahan, Iran. Totally, 326 nasal samples were collected by cotton sterile swab from the nasal cavity of participants. Standard microbiological methods were used for identification S. aurues and MRSA isolates. Antibiotic susceptibility pattern was determined by the disc diffusion method according to the CLSI recommendation. Determination of SCCmec typing, agr groups, and virulence genes were performed by PCR method. Overall, 23.6% of cases were S. aureus carriers including, 23.4% (25/107) of HCWs and 23.7% (52/219) of patients. The rate of MRSA nasal carriages among patients was found to be 51.9% and 16% in HCWs. The highest levels of resistance among MRSA isolates were against ampicillin (93.5%) and tetracycline (83.4%); while, the most effective antibiotics were vancomycin and co-trimoxazole with 100% and 71%, susceptibility. The presence of hla and pvl genes was detected in 80.6% and 3.2% of MRSA isolates, respectively. SCCmec types I, III, IV and V were found in 16.1%, 25.8%, 25.8%, and 16.1% of isolates, respectively. Moreover, agr group I was the predominant type with 43.3. Our results showed a high rate of MRSA colonization in hospitalized patients which remains a significant healthcare problem in our region.

Impact of Molecular Epidemiology and Reduced Susceptibility to Glycopeptides and Daptomycin on Outcomes of Patients with Methicillin-Resistant Staphylococcus aureus Bacteremia

PubMed Central

Lee, Hao-Yuan; Chen, Chyi-Liang; Liu, Shu-Ying; Yan, Yu-Shan; Chang, Chee-Jen; Chiu, Cheng-Hsun

2015-01-01

Background Methicillin-resistant Staphylococcus aureus (MRSA) bacteremia was associated with high mortality, but the risk factors associated with mortality remain controversial. Methods A retrospective cohort study was designed. All patients with MRSA bacteremia admitted were screened and collected for their clinical presentations and laboratory characteristics. Minimum inhibitory concentration (MIC) and staphylococcal cassette chromosome mec (SCCmec) type of bacterial isolates were determined. Risk factors for mortality were analyzed. Results Most MRSA isolates from the 189 enrolled patients showed reduced susceptibility to antibiotics, including MIC of vancomycin ≥ 1.5 mg/L (79.9%), teicoplanin ≥ 2 mg/L (86.2%), daptomycin ≥ 0.38 mg/L (73.0%) and linezolid ≥ 1.5 mg/L (64.0%). MRSA with vancomycin MIC ≥ 1.5 mg/L and inappropriate initial therapy were the two most important risk factors for mortality (both P < 0.05; odds ratio = 7.88 and 6.78). Hospital-associated MRSA (HA-MRSA), carrying SCCmec type I, II, or III, was associated with reduced susceptibility to vancomycin, teicoplanin or daptomycin and also with higher attributable mortality (all P < 0.05). Creeping vancomycin MIC was linked to higher MIC of teicoplanin and daptomycin (both P < 0.001), but not linezolid (P = 0.759). Conclusions Giving empirical broad-spectrum antibiotics for at least 5 days to treat catheter-related infections, pneumonia, soft tissue infection and other infections was the most important risk factor for acquiring subsequent HA-MRSA infection. Choice of effective anti-MRSA agents for treating MRSA bacteremia should be based on MIC of vancomycin, teicoplanin and daptomycin. Initiation of an effective anti-MRSA agent without elevated MIC in 2 days is crucial for reducing mortality. PMID:26295150

Shifts in the Clonal Distribution of Methicillin-Resistant Staphylococcus aureus in Kuwait Hospitals: 1992-2010

PubMed Central

Boswihi, Samar S.; Udo, Edet E.; Al-Sweih, Noura

2016-01-01

Background As the epidemiology of methicillin-resistant Staphylococcus aureus (MRSA) is constantly changing globally, determining the prevailing MRSA clones in a local healthcare facility is important for better management of infections. This study investigated clonal composition and distribution of MRSA isolates in Kuwait’s hospitals using a combination of molecular typing methods. Materials and Methods In total, 400 non-repeat MRSA isolates were obtained between 1992 and 2010 in 13 public hospitals and were characterized using antibiogram, SCCmec typing, spa typing, and multilocus-sequence typing. Clonal assignment and detection of virulence factors and antibiotic resistance genes were performed by DNA microarray. Results The isolates were resistant to kanamycin (74.2%), erythromycin (69.5%), tetracycline (66.7%), gentamicin (61%), ciprofloxacin, (61%), fusidic acid (53.5%), clindamycin (41.5%), high-level mupirocin resistance (5.2%) and carried aphA3, aacA-aphD, ermA, ermC, mupA, tetK, tetM, fusC and far1. Molecular typing revealed 31 different MRSA clones consisting of ST239-MRSA-III (52.2%), ST22-MRSA-IV (9.2%), ST80-MRSA-IV (7.5%), ST5-MRSA-II/IV/V/VI (6.5%), ST30-MRSA-IV (3.5%), ST241-MRSA-III (2.7%), ST6-MRSA-IV (2.2%), ST36-MRSA-II (2%) and ST772-MRSA-V (1.75%). The isolates differed in the carriage of genes for enterotoxins, Panton–Valentine leukocidin (PVL), toxic shock syndrome toxin (tst-1), arginine catabolic mobile element (ACME) and exfoliative toxins. The number of clones increased from one (ST239-III-t037) in 1992 to 30 in 2010 including ST8-IV-t008 [PVL+] [ACME+] (USA300), ST772-V (Bengal Bay clone) and ST2816 identified for the first time in Kuwait. Conclusion The study revealed that the MRSA isolates belonged to diverse clones that changed in numbers and diversity overtime. Although ST239-MRSA-III, a healthcare-associated clone remained the dominant MRSA clone overtime, the newly emerged clones consisted mostly of community-associated. PMID:27631623

Comparative analysis of the virulence characteristics of epidemic methicillin-resistant Staphylococcus aureus (MRSA) strains isolated from Chinese children: ST59 MRSA highly expresses core gene-encoded toxin.

PubMed

Li, Shipeng; Sun, Jing; Zhang, Jianzhong; Li, Xiangmei; Tao, Xiaoxia; Wang, Lijuan; Sun, Mingjiao; Liu, Yingchao; Li, Juan; Qiao, Yanhong; Yu, Sangjie; Yao, Kaihu; Yang, Yonghong; Shen, Xuzhuang

2014-02-01

This study aims to investigate the prevalence of a novel cell wall-anchored protein gene, sasX, and to obtain information on the genetic basis for the pathogenic potential of the MRSA strains isolated from Chinese children. The molecular and virulence characteristics of the clinical strains were analyzed. Twenty-two sequence types (STs) were obtained, with six epidemic clones ST59, ST239, ST1, ST910, ST88, and ST338 accounting for 35.8, 22, 6.6, 6.6, 5.3, and 4.1% respectively. The expression levels of hla, psmα, and RNAIII were higher in ST59 than in other STs (p < 0.05). The sasX gene was detected in 26 (10.7%) MRSA isolates. ST239-MRSA-SCCmecIII-t037 (61.5%) was the predominant sasX-positive MRSA clone. The expressions of PSMα and RNAIII were higher in sasX-positive ST239 isolates than in sasX-negative ST239 ones (p < 0.01). Notably, the percentage of invasive infection in infections caused by sasX-positive ST239 MRSA was higher than that by sasX-negative ST239 MRSA (p = 0.008). This study indicated that ST59 was the predominant clone in the MRSA isolates obtained from Chinese children and might have stronger pathogenic potential. The prevalence of the sasX gene in the MRSA isolates from children was relatively low. Furthermore, the sasX gene might be related to the expressions of PSMα and RNAIII and infection invasiveness. © 2013 APMIS Published by John Wiley & Sons Ltd.

Genomic characterization of coagulase-negative staphylococci including methicillin-resistant Staphylococcus sciuri causing bovine mastitis.

PubMed

Khazandi, Manouchehr; Al-Farha, Abd Al-Bar; Coombs, Geoffrey W; O'Dea, Mark; Pang, Stanley; Trott, Darren J; Aviles, Ricardo R; Hemmatzadeh, Farhid; Venter, Henrietta; Ogunniyi, Abiodun D; Hoare, Andrew; Abraham, Sam; Petrovski, Kiro R

2018-06-01

Methicillin-resistant coagulase-negative staphylococci (MRCoNS) have recently emerged as a significant cause of bovine mastitis worldwide. Here we describe the isolation of MRCoNS from cases of bovine mastitis from a single dairy farm in Australia. Fourteen CoNS isolates were identified as MRCoNS on the basis of having an oxacillin MIC of ≥0.5 μg/mL. The isolates were speciated as S. chromogenes (n = 1) S. fleurettii (n = 1), S. haemolyticus (n = 2), S. sciuri (n = 5), S. simulans (n = 1) S. succinus (n = 2) and S. xylosus (n = 2). Five of the isolates (S. fleuretti, S. haemolyticus S. sciuri and two S. succinus) were mecA-positive. We also detected a previously described S. sciuri mecA homolog in four oxacillin-resistant S. sciuri isolates. The remainder of the putative MRCoNS did not contain any mecA-related resistance determinants in their genomes. Comparative genomic analysis of three previously published S. sciuri isolates, from humans, a squirrel and a cereal crop (rice), and a representative isolate from our study demonstrated clustering and a high degree of genetic homogeneity (>95%), suggesting S. sciuri has low host specificity. In conclusion, CoNS, in particular S. sciuri, may act as a reservoir for SCCmec elements that can easily be spread between different host species by direct cross-infection. Copyright © 2018 Elsevier B.V. All rights reserved.

Distribution of methicillin-resistant coagulase-positive staphylococci (MRCoPS) in a surgical unit and cystotomy operation sites in a veterinary teaching hospital

PubMed Central

FUNGWITHAYA, Punpichaya; BRIKSHAVANA, Pasakorn; CHANCHAITHONG, Pattrarat; PRAPASARAKUL, Nuvee

2016-01-01

This study aimed to investigate the spread of methicillin-resistant coagulase-positive staphylococci (MRCoPS) among veterinary staff, hand-touch sites and surgical tissue during cystotomy operations on cats and dogs that were patients, and to analyze the genetic relatedness and antimicrobial resistance profiles of the isolates. Human and environmental samples were obtained from the nasal passageways of 12 surgeons and veterinary assistants and from 29 hand-touch sites of instruments in operative units and subjected to bacterial isolation and enumeration. Swab samples were collected in triplicate from 29 dogs and three cats at the site of incision, from the incision area, from the peritoneum during surgery and from the peritoneum before suture. MRCoPS were identified by mecA gene detection and characterized by their antibiogram profile, SCCmec type and pulsed-field gel electrophoresis. Twenty-four staphylococci were isolated, derived from one veterinary assistant, 12 operating room floor areas and hand-touch sites, three dogs and one cat. Methicillin-resistant S. pseudintermedius (MRSP) was found on an electric clipper and rebreathing circuits in the operating room. Three dogs were positive for MRSP during surgery, and one methicillin-resistant S. aureus (MRSA) was detected in a cat. All MRCoPS were resistant to doxycycline, erythromycin, clindamycin and enrofloxacin, but no patients developed surgical site infections. According to their genotypic patterns, the clones obtained from the environment and human sources differed from the animal clones. Despite intensive hygienic management, a variety of MRCoPS clones were present within the surgical unit and during surgery. PMID:27990009

Distribution of methicillin-resistant coagulase-positive staphylococci (MRCoPS) in a surgical unit and cystotomy operation sites in a veterinary teaching hospital.

PubMed

Fungwithaya, Punpichaya; Brikshavana, Pasakorn; Chanchaithong, Pattrarat; Prapasarakul, Nuvee

2017-02-28

This study aimed to investigate the spread of methicillin-resistant coagulase-positive staphylococci (MRCoPS) among veterinary staff, hand-touch sites and surgical tissue during cystotomy operations on cats and dogs that were patients, and to analyze the genetic relatedness and antimicrobial resistance profiles of the isolates. Human and environmental samples were obtained from the nasal passageways of 12 surgeons and veterinary assistants and from 29 hand-touch sites of instruments in operative units and subjected to bacterial isolation and enumeration. Swab samples were collected in triplicate from 29 dogs and three cats at the site of incision, from the incision area, from the peritoneum during surgery and from the peritoneum before suture. MRCoPS were identified by mecA gene detection and characterized by their antibiogram profile, SCCmec type and pulsed-field gel electrophoresis. Twenty-four staphylococci were isolated, derived from one veterinary assistant, 12 operating room floor areas and hand-touch sites, three dogs and one cat. Methicillin-resistant S. pseudintermedius (MRSP) was found on an electric clipper and rebreathing circuits in the operating room. Three dogs were positive for MRSP during surgery, and one methicillin-resistant S. aureus (MRSA) was detected in a cat. All MRCoPS were resistant to doxycycline, erythromycin, clindamycin and enrofloxacin, but no patients developed surgical site infections. According to their genotypic patterns, the clones obtained from the environment and human sources differed from the animal clones. Despite intensive hygienic management, a variety of MRCoPS clones were present within the surgical unit and during surgery.

Molecular epidemiology of coagulase-negative Staphylococcus carriage in neonates admitted to an intensive care unit in Brazil

PubMed Central

2013-01-01

Background Nasal colonization with coagulase-negative Staphylococcus (CoNS) has been described as a risk factor for subsequent systemic infection. In this study, we evaluated the genetic profile of CoNS isolates colonizing the nares of children admitted to a neonatal intensive care unit (NICU). Methods We assessed CoNS carriage at admittance and discharge among newborns admitted to a NICU from July 2007 through May 2008 in one of the major municipalities of Brazil. Isolates were screened on mannitol salt agar and tryptic soy broth and tested for susceptibility to antimicrobials using the disc diffusion method. Polymerase chain reaction (PCR) was used to determine the species, the presence of the mecA gene, and to perform SCCmec typing. S. epidermidis and S. haemolyticus isolated from the same child at both admission and discharge were characterized by PFGE. Results Among 429 neonates admitted to the NICU, 392 (91.4%) had nasal swabs collected at both admission and discharge. The incidence of CoNS during the hospitalization period was 55.9% (95% confidence interval [CI]: 50.9-60.7). The most frequently isolated species were S. haemolyticus (38.3%) and S.epidermidis (38.0%). Multidrug resistance (MDR) was detected in 2.2% and 29.9% of the CoNS isolates, respectively at admittance and discharge (p = 0.053). The mecA gene was more prevalent among strains isolated at discharge (83.6%) than those isolated at admission (60%); overall, SCCmec type I was isolated most frequently. The length of hospitalization was associated with colonization by MDR isolates (p < 0.005). Great genetic diversity was observed among S. epidermidis and S. haemolyticus. Conclusions NICU represents an environment of risk for colonization by MDR CoNS. Neonates admitted to the NICU can become a reservoir of CoNS strains with the potential to spread MDR strains into the community. PMID:24308773

Analysis of Pathogen and Host Factors Related to Clinical Outcomes in Patients with Hospital-Acquired Pneumonia Due to Methicillin-Resistant Staphylococcus aureus

PubMed Central

Haque, Nadia Z.; Arshad, Samia; Peyrani, Paula; Ford, Kimbal D.; Perri, Mary B.; Jacobsen, Gordon; Reyes, Katherine; Scerpella, Ernesto G.; Ramirez, Julio A.

2012-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a major cause of nosocomial pneumonia. To characterize pathogen-derived and host-related factors in intensive care unit (ICU) patients with MRSA pneumonia, we evaluated the Improving Medicine through Pathway Assessment of Critical Therapy in Hospital-Acquired Pneumonia (IMPACT-HAP) database. We performed multivariate regression analyses of 28-day mortality and clinical response using univariate analysis variables at a P level of <0.25. In isolates from 251 patients, the most common molecular characteristics were USA100 (55.0%) and USA300 (23.9%), SCCmec types II (64.1%) and IV (33.1%), and agr I (36.7%) and II (61.8%). Panton-Valentine leukocidin (PVL) was present in 21.9%, and vancomycin heteroresistance was present in 15.9%. Mortality occurred in 37.1% of patients; factors in the univariate analysis were age, APACHE II score, AIDS, cardiac disease, vascular disease, diabetes, SCCmec type II, PVL negativity, and higher vancomycin MIC (all P values were <0.05). In multivariate analysis, independent predictors were APACHE II score (odds ratio [OR], 1.090; 95% confidence interval [CI], 1.041 to 1.141; P < 0.001) and age (OR, 1.024; 95% CI, 1.003 to 1.046; P = 0.02). Clinical failure occurred in 36.8% of 201 evaluable patients; the only independent predictor was APACHE II score (OR, 1.082; 95% CI, 1.031 to 1.136; P = 0.002). In summary, APACHE II score (mortality, clinical failure) and age (mortality) were the only independent predictors, which is consistent with severity of illness in ICU patients with MRSA pneumonia. Interestingly, our univariate findings suggest that both pathogen and host factors influence outcomes. As the epidemiology of MRSA pneumonia continues to evolve, both pathogen- and host-related factors should be considered when describing epidemiological trends and outcomes of therapeutic interventions. PMID:22337980

Interspecies spread of Staphylococcus aureus clones among companion animals and human close contacts in a veterinary teaching hospital. A cross-sectional study in Greece.

PubMed

Drougka, Eleanna; Foka, Antigoni; Koutinas, Christos K; Jelastopulu, Eleni; Giormezis, Nikolaos; Farmaki, Ourania; Sarrou, Styliani; Anastassiou, Evangelos D; Petinaki, Efthimia; Spiliopoulou, Iris

2016-04-01

Staphylococcus aureus and methicillin-resistant S. aureus (MRSA) prevalence among companion animals and veterinary personnel (VP) was investigated. Strains' molecular characteristics were evaluated in order to assess S. aureus transmission. Specimens (224) from colonized and infected sites of 102 animals (92 dogs, 10 cats) and 18 VP were collected during 2012 and 2013. Antibiotic susceptibility was performed by the disk diffusion method and Etest. mecA, mecC, tst (toxic shock syndrome toxin) and lukF/lukS-PV (Panton-Valentine leukocidin, PVL) genes were investigated by PCR. Genotypes were identified by Multi Locus Sequence Typing (MLST), Staphylococcal Cassette Chromosome mec (SCCmec), accessory gene regulator group (agr), spa and Pulsed Field Gel Electrophoresis (PFGE). S. aureus prevalence among pets and VP was 36.3% (37/102) and 38.9% (7/18), respectively. Younger companion animals, those living in rural areas, having a disease upon admission or Coagulase-negative staphylococci co-carriage showed significantly higher prevalence of S. aureus isolation (p<0.05). Twenty-six pets and five VP carried PVL-positive S. aureus. In total, 60 S. aureus strains were recovered (53 from pets, seven from VP) of which 16 were MRSA (26.7%), 12 mecA- and four mecC-positive. MRSA showed higher resistance rates against other antimicrobials as compared to methicillin-susceptible ones. Strains were classified by MLST in 13 STs, with the predominance of ST80 and ST15. In MRSA, SCCmec types II, IV and XI were identified. The most frequent spa types were t5559 and t7558. Fifty-six strains were classified into 15 PFGE types. Comparison of genetic markers shows that identical or very similar strains disseminate among animals and VP. Companion animals harbor PVL-positive clones constituting a possible source for transmission to humans. Copyright © 2016 Elsevier B.V. All rights reserved.

Staphylococcus aureus carriage in older populations in community residential care homes: Prevalence and molecular characterization of MRSA isolates.

PubMed

Galán-Sánchez, Fátima; Pérez-Eslava, Maria; Machuca, Jesús; Trujillo-Soto, Teresa; Arca-Suarez, Jorge; Rodríguez-Iglesias, Manuel

2018-06-20

The epidemiology of S. aureus depends on conditions in specific populations. Few studies of S. aureus colonization in the older population have been performed in Spain. The aim of this study was to determine the prevalence of methicillin-resistant S. aureus (MRSA) colonization and its molecular epidemiological characteristics in an institutionalized population in community residential care homes in Cadiz, Spain. A cross-sectional epidemiological study was conducted in three residential care homes for older people. Axilla and nostril samples were tested. Identification of S. aureus and antimicrobial susceptibility testing were by MALDI-TOF and MicroScan panels. MRSA strains were subjected to SCCmec typing, multilocus sequence typing (MLST) and pulsed-field gel electrophoresis (PFGE). The presence of Panton-Valentine leukocidin (PVL) genes was determined by PCR in all S. aureus strains. A total of 293 residents were included. Fifty-one residents (17.4%) were colonized with methicillin-sensitive S. aureus (MSSA) and 11 (3.8%) with MRSA. Resistance to at least two aminoglycosides was observed in 25.4% of MSSA and 90.9% and of MRSA isolates, and resistance to levofloxacin in 80.3% of MSSA and 100% of MRSA isolates. SCCmecIV was detected in all isolates and all except one (ST-125) were ST-8. None of the S. aureus isolates were positive for PVL. A low rate of S. aureus carriage was detected and the prevalence of MRSA was very low. ST8-MRSA-IVc was the dominant clone, and only one strain belonged to ST125-MRSA-IVc. We found MRSA transmission within the residential care homes and a very high rate of quinolone resistance in MSSA and MRSA. Copyright © 2018 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

First international spread and dissemination of the virulent Queensland community-associated methicillin-resistant Staphylococcus aureus strain.

PubMed

Ellington, M J; Ganner, M; Warner, M; Boakes, E; Cookson, B D; Hill, R L; Kearns, A M

2010-07-01

We report the first international spread and dissemination of ST93-SCCmecIV (Queensland clone) methicillin-resistant Staphylococcus aureus (MRSA), previously identified in communities and hospitals in Australia. Ten highly genetically related MRSA isolates and one methicillin-susceptible S. aureus (MSSA) isolate were identified in England between 2005 and June 2008. The demography and clinical features were typical for community-associated-MRSA. One female with MRSA infection died from necrotizing pneumonia. Travel between Australia and the UK, and some onward transmission, suggested that both importation and clonal dissemination of this strain had occurred, albeit to a small extent. Nosocomial transmission was not detected, but we remain vigilant for further importations and/or spread.

An outbreak of post-partum breast abscesses in Mumbai, India caused by ST22-MRSA-IV: genetic characteristics and epidemiological implications

PubMed Central

MANOHARAN, A.; ZHANG, L.; POOJARY, A.; BHANDARKAR, L.; KOPPIKAR, G.; ROBINSON, D. A.

2012-01-01

SUMMARY A cluster of methicillin-resistant Staphylococcus aureus (MRSA) breast abscesses in women who had given birth at a hospital in Mumbai, India was investigated retrospectively. Nineteen of twenty cases were caused by a single clone: pvl-positive, spa type 648 (Ridom t852), ccrB:dru subtype 3:0, ST22-MRSA-IV. Despite the presence of pvl and SCCmec type IV, which are common genetic markers among community-associated MRSA, this outbreak was caused by a healthcare-associated, community-onset MRSA that was common in the hospital environment. Thus, infection control practices may have an important role in limiting the spread of this virulent clone. PMID:22475374

Rapid containment of nosocomial transmission of a rare community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) clone, responsible for the Staphylococcal Scalded Skin Syndrome (SSSS).

PubMed

Lamanna, Onofrio; Bongiorno, Dafne; Bertoncello, Lisa; Grandesso, Stefano; Mazzucato, Sandra; Pozzan, Giovanni Battista; Cutrone, Mario; Chirico, Michela; Baesso, Flavia; Brugnaro, Pierluigi; Cafiso, Viviana; Stefani, Stefania; Campanile, Floriana

2017-01-06

The aims of this study were to identify the source and the transmission pathway for a Staphylococcal Scalded Skin Syndrome (SSSS) outbreak in a maternity setting in Italy over 2 months, during 2014; to implement appropriate control measures in order to prevent the epidemic spread within the maternity ward; and to identify the Methicillin-Resistant Staphylococcus aureus (MRSA) epidemic clone. Epidemiological and microbiological investigations, based on phenotyping and genotyping methods, were performed. All neonates involved in the outbreak underwent clinical and microbiological investigations to detect the cause of illness. Parents and healthcare workers were screened for Staphylococcus aureus to identify asymptomatic carriers. The SSSS outbreak was due to the cross-transmission of a rare clone of ST5-CA-MRSA-SCCmecV-spa type t311, exfoliative toxin A-producer, isolated from three neonates, one mother (from her nose and from dermatological lesions due to pre-existing hand eczema) and from a nurse (colonized in her nose by this microorganism). The epidemiological and microbiological investigation confirmed these as two potential carriers. A rapid containment of these infections was obtained only after implementation of robust swabbing of mothers and healthcare workers. The use of molecular methodologies for typing was able to identify all carriers and to trace the transmission.

Dynamic of nasal colonization by methicillin-resistant Staphylococcus aureus ST398 and ST1 after mupirocin treatment in a family in close contact with pigs.

PubMed

Lozano, Carmen; Aspiroz, Carmen; Lasarte, Juan J; Gómez-Sanz, Elena; Zarazaga, Myriam; Torres, Carmen

2011-01-01

Nasal colonization by methicillin-resistant Staphylococcus aureus (MRSA) was evaluated after a mupirocin treatment in a family previously colonized by MRSA sequence type ST398 and ST1, who lived close to a pig farm. Eight nasal samples were swabbed from each of the four family members on different moments after mupirocin treatment. The efficacy of treatment was low in those family members who worked in the farm, and higher in the remaining two family members with sporadic contact with pigs. In addition, nasal and skin swabs from randomly selected pigs of the farm were taken. MRSA were detected in 33% of pigs tested. All MRSA isolates obtained were characterized by Staphylococcal-Cassette-Chromosome mec (SCCmec) determination, Multilocus-Sequence-Typing (MLST), spa- and agr-typing, Pulsed-field-gel-electrophoresis (PFGE), antimicrobial susceptibility, detection of antimicrobial resistance genes, and toxin gene profiling. Spa-types t011, t1255 and t1197 were detected in humans and animals, with indistinguishable PFGE patterns, suggesting animal to human MRSA transmission. Each spa-type was ascribed to a specific pulsotype. Spa-types t127 and t108 were only detected in MRSA isolates obtained from humans, and t012 only in those from animals. MRSA ST1-t127 isolates and some ST398-t011 and ST398-t1197 isolates presented a multiantimicrobial-resistance phenotype. None of them harbored lukF/lukS, tst, eta and etb virulence genes. This study showed that the efficacy of nasal MRSA decolonization in healthy people with very close contact with pigs is especially low. Copyright © 2010 Elsevier Ltd. All rights reserved.

Major and trace element concentrations in samples from 72275 and 72255. [chemical composition of lunar rocks

NASA Technical Reports Server (NTRS)

Haskin, L. A.; Blanchard, D. P.; Korotev, R.; Jacobs, J. W.; Brannon, J. A.; Herrmann, A. G.

1974-01-01

Analytical data have been obtained for Co, Sc, Hf, Zn, Cr, Ga, Rb, Cs, Ni, major elements, and rare earth elements in eight samples from boulder 1. The data for trace elements were obtained by radiochemical neutron activation analysis. Major elements, except Na and Mn, were obtained by atomic absorption spectral photometry. Values for Na and Mn were obtained by neutron activation analysis of the same powder that was later dissolved to provide the atomic absorption analyses.

The epidemiology of Staphylococcus aureus carriage in patients attending inner city sexually transmitted infections and community clinics in Calgary, Canada.

PubMed

Ugarte Torres, Alejandra; Chu, Angel; Read, Ron; MacDonald, Judy; Gregson, Daniel; Louie, Thomas; Delongchamp, Johanna; Ward, Linda; McClure, Joann; Zhang, Kunyan; Conly, John

2017-01-01

Although the nares represent the most common carriage site for traditional hospital-associated strains of Staphylococcus aureus (SA), the predominant site of carriage of SA in the community is less certain. We conducted a cross-sectional study in 285 patients attending sexually transmitted diseases and inner-city clinics to evaluate the prevalence, body site colonisation and risk factors associated with carriage of methicillin susceptible SA (MSSA). All isolates were characterized by pulsed field gel electrophoresis, staphylococcal cassette chromosome mec, staphylococcal protein A and multilocus sequence typing. The prevalence of colonisation with SA was 57.5% (164/285); 162 (56.8%) participants were colonized with MSSA, and 4 (1.4%) with methicillin-resistant SA (MRSA), 2 of them were co-colonised with both MRSA and MSSA. The most common sites of colonisation were the throat (73.1%), nares (65.2%) and interdigital web spaces of the hand (21.3%). Three out of 4 MRSA isolates were USA300-MRSA strains. Twelve MSSA isolates were closely related to the USA300 CA-MRSA. We identified sexual behaviours such as having more than 6 heterosexual sexual partners in the last 6 months and trimming pubic hair to be independently associated with MSSA colonisation, and more specifically practicing oral sex as a risk factor for throat colonisation. There is a high prevalence of MSSA carriage in this population, with a low prevalence of MRSA. The throat was the most common site of carriage and sexual behaviours were found to be risk factors for MSSA colonisation. Close strain relatedness of MSSA and USA300-MRSA isolates suggests either gain or loss of the SCCmec element, respectively.

MRSA clonal complex 22 strains harboring toxic shock syndrome toxin (TSST-1) are endemic in the primary hospital in Gaza, Palestine.

PubMed

Al Laham, Nahed; Mediavilla, José R; Chen, Liang; Abdelateef, Nahed; Elamreen, Farid Abu; Ginocchio, Christine C; Pierard, Denis; Becker, Karsten; Kreiswirth, Barry N

2015-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is an important pathogen in both community and healthcare-related settings worldwide. Current knowledge regarding the epidemiology of S. aureus and MRSA in Gaza is based on a single community-based carriage study. Here we describe a cross-sectional analysis of 215 clinical isolates collected from Al-Shifa Hospital in Gaza during 2008 and 2012. All isolates were characterized by spa typing, SCCmec typing, and detection of genes encoding Panton-Valentine leukocidin (PVL) and toxic shock syndrome toxin (TSST-1). Representative genotypes were also subjected to multilocus sequence typing (MLST). Antibiotic susceptibility testing was performed using VITEK2 and MicroScan. MRSA represented 56.3% of all S. aureus strains, and increased in frequency from 2008 (54.8%) to 2012 (58.4%). Aside from beta-lactams, resistance was observed to tetracycline, erythromycin, clindamycin, gentamicin, and fluoroquinolones. Molecular typing identified 35 spa types representing 17 MLST clonal complexes (CC), with spa 998 (Ridom t223, CC22) and spa 70 (Ridom t044, CC80) being the most prevalent. SCCmec types I, III, IV, V and VI were identified among MRSA isolates, while type II was not detected. PVL genes (lukF/S-PV) were detected in 40.0% of all isolates, while the TSST-1 gene (tst) was detected in 27.4% of all isolates, with surprisingly high frequency within CC22 (70.4%). Both PVL and TSST-1 genes were found in several isolates from 2012. Molecular typing of clinical isolates from Gaza hospitals revealed unusually high prevalence of TSST-1 genes among CC22 MRSA, which is noteworthy given a recent community study describing widespread carriage of a CC22 MRSA clone known as the 'Gaza strain'. While the latter did not address TSST-1, tst-positive spa 998 (Ridom t223) has been detected in several neighboring countries, and described as endemic in an Italian NICU, suggesting international spread of a 'Middle Eastern variant' of pandemic CC22 strain EMRSA-15.

Genotypes and oxacillin resistance of Staphylococcus aureus from chicken and chicken meat in Poland.

PubMed

Krupa, P; Bystroń, J; Bania, J; Podkowik, M; Empel, J; Mroczkowska, A

2014-12-01

The genotypes and oxacillin resistance of 263 Staphylococcus aureus isolates cultured from chicken cloacae (n = 138) and chicken meat (n = 125) was analyzed. Fifteen spa types were determined in the studied S. aureus population. Among 5 staphylococcal protein A gene (spa) types detected in S. aureus from chicken, t002, t3478, and t13620 were the most frequent. Staphylococcus aureus isolates from meat were assigned to 14 spa types. Among them, the genotypes t002, t056, t091, t3478, and t13620 were dominant. Except for 4 chicken S. aureus isolates belonging to CC398, the remaining 134 isolates were clustered into multilocus sequence clonal complex (CC) 5. Most of meat-derived isolates were assigned to CC5, CC7, and CC15, and to the newly described spa-CC12954 complex belonging to CC1. Except for t011 (CC398), all other spa types found among chicken isolates were also present in isolates from meat. Four S. aureus isolated from chicken and one from meat were identified as methicillin-resistant S. aureus (MRSA) with oxacillin minimum inhibitory concentrations from 16 to 64 μg/mL. All MRSA were assigned to spa types belonging to ST398, and included 4 animal spa t011 SCCmecV isolates and 1 meat-derived spa t899, SCCmecIV isolate. Borderline oxacillin-resistant S. aureus (BORSA) isolates, shown to grow on plates containing 2 to 3 μg/mL of oxacillin, were found within S. aureus isolates from chicken (3 isolates) and from meat (19 isolates). The spa t091 and t084 dominated among BORSA from chicken meat, whereas t548 and t002 were found within animal BORSA. We report for the first time the presence of MRSA in chicken in Poland. We demonstrate that MRSA CC398 could be found in chicken meat indicating potential of introduction of animal-associated genotypes into the food chain. We also report for the first time the possibility of transmission of BORSA isolates from chicken to meat. ©2014 Poultry Science Association Inc.

Large outbreak caused by methicillin resistant Staphylococcus pseudintermedius ST71 in a Finnish Veterinary Teaching Hospital--from outbreak control to outbreak prevention.

PubMed

Grönthal, Thomas; Moodley, Arshnee; Nykäsenoja, Suvi; Junnila, Jouni; Guardabassi, Luca; Thomson, Katariina; Rantala, Merja

2014-01-01

The purpose of this study was to describe a nosocomial outbreak caused by methicillin resistant Staphylococcus pseudintermedius (MRSP) ST71 SCCmec II-III in dogs and cats at the Veterinary Teaching Hospital of the University of Helsinki in November 2010 - January 2012, and to determine the risk factors for acquiring MRSP. In addition, measures to control the outbreak and current policy for MRSP prevention are presented. Data of patients were collected from the hospital patient record software. MRSP surveillance data were acquired from the laboratory information system. Risk factors for MRSP acquisition were analyzed from 55 cases and 213 controls using multivariable logistic regression in a case-control study design. Forty-seven MRSP isolates were analyzed by pulsed field gel electrophoresis and three were further analyzed with multi-locus sequence and SCCmec typing. Sixty-three MRSP cases were identified, including 27 infections. MRSPs from the cases shared a specific multi-drug resistant antibiogram and PFGE-pattern indicated clonal spread. Four risk factors were identified; skin lesion (OR = 6.2; CI95% 2.3-17.0, P = 0.0003), antimicrobial treatment (OR = 3.8, CI95% 1.0-13.9, P = 0.0442), cumulative number of days in the intensive care unit (OR = 1.3, CI95% 1.1-1.6, P = 0.0007) or in the surgery ward (OR = 1.1, CI95% 1.0-1.3, P = 0.0401). Tracing and screening of contact patients, enhanced hand hygiene, cohorting and barrier nursing, as well as cleaning and disinfection were used to control the outbreak. To avoid future outbreaks and spread of MRSP a search-and-isolate policy was implemented. Currently nearly all new MRSP findings are detected in screening targeted to risk patients on admission. Multidrug resistant MRSP is capable of causing a large outbreak difficult to control. Skin lesions, antimicrobial treatment and prolonged hospital stay increase the probability of acquiring MRSP. Rigorous control measures were needed to control the outbreak. We recommend the implementation of a search-and-isolate policy to reduce the burden of MRSP.

Prevalence and characterization of methicillin-resistant Staphylococcus aureus isolates from retail meat and humans in Georgia.

PubMed

Jackson, Charlene R; Davis, Johnnie A; Barrett, John B

2013-04-01

There is increasing interest in the presence of Staphylococcus aureus, specifically methicillin-resistant S. aureus (MRSA), on retail meat products. In this study, staphylococci were isolated from retail pork and retail beef in Georgia, and MRSA from the products was compared to human MRSA from the same geographic area using broth microdilution antimicrobial susceptibility testing, multilocus sequence typing (MLST), spa typing, SCCmec typing, and pulsed-field gel electrophoresis (PFGE). S. aureus was isolated from 45% (45/100) of pork products and 63% (63/100) of beef products; mecA was detected in S. aureus from both pork (3/100; 3%) and beef (4/100; 4%). Fifty percent (50/100) of human S. aureus also contained mecA. Multidrug resistance was detected among MRSA from all sources. All MRSA (n = 57) was SCCmec type IV, and nine different spa types were present among the isolates (t002, t008, t012, t024, t179, t337, t548, t681, and t1062). Four sequence types (ST5, ST8, ST9, and ST30) were detected using MLST; the majority of MRSA isolates belonged to ST8, followed by ST5. One retail beef MRSA isolate belonged to ST8, while the remaining three were ST5. In retail pork MRSA, ST5, ST9, and ST30 were observed. The majority of human MRSA isolates belonged to ST8. Thirty-seven MRSA isolates, one of which was a retail beef MRSA isolate, were pvl(+). Using PFGE, MLST, and spa typing, three retail beef MRSA isolates were found to be identical in PFGE pattern, ST, and spa type to two human clonal MRSA isolates (USA100 and USA300). One additional retail beef MRSA isolate had a PFGE pattern similar to that of a human MRSA isolate, whereas none of the retail pork MRSA isolates had PFGE patterns similar to those of human MRSA isolates. These data suggest that the retail beef samples were contaminated by a human source, possibly during processing of the meat, and may present a source of MRSA for consumers and others who handle raw meat.

Prevalence and Characterization of Methicillin-Resistant Staphylococcus aureus Isolates from Retail Meat and Humans in Georgia

PubMed Central

Davis, Johnnie A.; Barrett, John B.

2013-01-01

There is increasing interest in the presence of Staphylococcus aureus, specifically methicillin-resistant S. aureus (MRSA), on retail meat products. In this study, staphylococci were isolated from retail pork and retail beef in Georgia, and MRSA from the products was compared to human MRSA from the same geographic area using broth microdilution antimicrobial susceptibility testing, multilocus sequence typing (MLST), spa typing, SCCmec typing, and pulsed-field gel electrophoresis (PFGE). S. aureus was isolated from 45% (45/100) of pork products and 63% (63/100) of beef products; mecA was detected in S. aureus from both pork (3/100; 3%) and beef (4/100; 4%). Fifty percent (50/100) of human S. aureus also contained mecA. Multidrug resistance was detected among MRSA from all sources. All MRSA (n = 57) was SCCmec type IV, and nine different spa types were present among the isolates (t002, t008, t012, t024, t179, t337, t548, t681, and t1062). Four sequence types (ST5, ST8, ST9, and ST30) were detected using MLST; the majority of MRSA isolates belonged to ST8, followed by ST5. One retail beef MRSA isolate belonged to ST8, while the remaining three were ST5. In retail pork MRSA, ST5, ST9, and ST30 were observed. The majority of human MRSA isolates belonged to ST8. Thirty-seven MRSA isolates, one of which was a retail beef MRSA isolate, were pvl+. Using PFGE, MLST, and spa typing, three retail beef MRSA isolates were found to be identical in PFGE pattern, ST, and spa type to two human clonal MRSA isolates (USA100 and USA300). One additional retail beef MRSA isolate had a PFGE pattern similar to that of a human MRSA isolate, whereas none of the retail pork MRSA isolates had PFGE patterns similar to those of human MRSA isolates. These data suggest that the retail beef samples were contaminated by a human source, possibly during processing of the meat, and may present a source of MRSA for consumers and others who handle raw meat. PMID:23363837

A persistent antimicrobial resistance pattern and limited methicillin-resistance-associated genotype in a short-term Staphylococcus aureus carriage isolated from a student population.

PubMed

Mat Azis, Norhidayah; Pung, Hui P; Abdul Rachman, Abdul R; Amin Nordin, Syafinaz; Sarchio, Seri N E; Suhaili, Zarizal; Mohd Desa, Mohd N

The aim of the present study was to assess and compare the antimicrobial susceptibility pattern against a panel of antibiotics and molecular and methicillin resistance-associated genotypes of 120 carriage S. aureus isolates previously isolated from a student population at two isolation events within a one-month interval. The antibiotic susceptibility of isolates was determined using the Kirby-Bauer disc-diffusion method (cefoxitin by Etest). The MRSA was screened using polymerase chain reaction for the presence of the mecA gene. The mecA-positive isolates were subjected to staphylococcal cassette chromosome (SCC) mec typing, multilocus sequence typing (MLST) and eBURST analysis. All isolates were characterized for the presence of the Panton-Valentine leukocidin (PVL) gene, an enterobacterial repetitive intergenic consensus-polymerase chain reaction (ERIC-PCR) pattern and the spa type. For the two occasions where S. aureus was isolated, the highest frequency of resistance was observed for penicillin (70% and 65%, respectively), with a lower rate against erythromycin and tetracycline (<12%). All isolates were susceptible to ciprofloxacin and gentamycin. As for methicillin resistance, eight isolates had minimum inhibitory concentrations (MIC) of resistant categories, but 10 isolates (8.33%) were positive for the mecA gene. The mecA-positive isolates belonged to SCCmec types I (n=9) and V (n=1). MLST was resolved for only three MRSAs, ST508 (n=1), ST88 (n=1) and ST96 (n=1). The results of the eBURST analysis showed that the MRSA isolates analyzed in the present study were potentially related to MRSA identified in other countries. Approximately half of the persistent S. aureus carriers harbored S. aureus of a similar spa type in the respective individuals during both isolation events. A persistent antimicrobial pattern and limited distinct MRSAs were observed over the short study period. The latter frequently exhibited SCCmec type I, commonly associated with hospital-acquired (HA) characteristics, but further delineation is needed to justify the origins of these bacteria. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

The Emergence and Spread of Multiple Livestock-Associated Clonal Complex 398 Methicillin-Resistant and Methicillin-Susceptible Staphylococcus aureus Strains among Animals and Humans in the Republic of Ireland, 2010–2014

PubMed Central

Brennan, Gráinne I.; Abbott, Yvonne; Burns, Aisling; Leonard, Finola; McManus, Brenda A.; O’Connell, Brian; Coleman, David C.; Shore, Anna C.

2016-01-01

Clonal complex (CC) 398 methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-susceptible S. aureus (MSSA) are associated with carriage and infection among animals and humans but only a single case of CC398 MRSA has been reported in the Republic of Ireland (ROI). The present study investigated the molecular epidemiology of CC398 MRSA (n = 22) and MSSA (n = 10) from animals and humans in the ROI from 2010–2014. Isolates underwent antimicrobial susceptibility testing, spa typing, DNA microarray profiling and PCR for CC398-associated resistance genes. All MRSA underwent SCCmec IV or V subtyping. Four distinct CC398-MRSA incidents were identified from (i) a man in a nursing home (spa type t011-SCCmec IVa, immune evasion complex (IEC) negative), (ii) a horse and veterinarian who had recently travelled to Belgium (t011-IVa, IEC positive), (iii) pigs (n = 9) and farm workers (n = 9) on two farms, one which had been restocked with German gilts and the other which was a finisher farm (t034-VT, IEC negative, 3/9 pigs; t011- VT, IEC negative, 6/9 pigs & 9/9 farm workers), and (iv) a child who had worked on a pig farm in the UK (t034-VT, IEC negative). Isolates also carried different combinations of multiple resistance genes including erm(A), erm(B), tet(K), tet(M) & tet(L), fexA, spc, dfrG, dfrK aacA-aphD and aadD further highlighting the presence of multiple CC398-MRSA strains. CC398 MSSA were recovered from pigs (n = 8) and humans (n = 2). CC398 MSSA transmission was identified among pigs but zoonotic transmission was not detected with animal and human isolates exhibiting clade-specific traits. This study highlights the importation and zoonotic spread of CC398 MRSA in the ROI and the spread of CC398 MSSA among pigs. Increased surveillance is warranted to prevent further CC398 MRSA importation and spread in a country that was considered CC398 MRSA free. PMID:26886749

First Outbreak with MRSA in a Danish Neonatal Intensive Care Unit: Risk Factors and Control Procedures

PubMed Central

Ramsing, Benedicte Grenness Utke; Arpi, Magnus; Andersen, Erik Arthur; Knabe, Niels; Mogensen, Dorthe; Buhl, Dorte; Westh, Henrik; Østergaard, Christian

2013-01-01

Introduction The purpose of the study was to describe demographic and clinical characteristics and outbreak handling of a large methicillin-resistant Staphylococcus aureus (MRSA) outbreak in a neonatal intensive care unit (NICU) in Denmark June 25th–August 8th 2008, and to identify risk factors for MRSA transmission. Methods Data were collected retrospectively from medical records and the Danish Neobase database. All MRSA isolates obtained from neonates, relatives and NICU health care workers (HCW) as well as environmental cultures were typed. Results During the 46 day outbreak period, 102 neonates were admitted to the two neonatal wards. Ninety-nine neonates were subsequently sampled, and 32 neonates (32%) from 25 families were colonized with MRSA (spa-type t127, SCCmec V, PVL negative). Thirteen family members from 11 of those families (44%) and two of 161 HCWs (1%) were colonized with the same MRSA. No one was infected. Five environmental cultures were MRSA positive. In a multiple logistic regression analysis, nasal Continuous Positive Airway Pressure (nCPAP) treatment (p = 0.006) and Caesarean section (p = 0.016) were independent risk factors for MRSA acquisition, whereas days of exposure to MRSA was a risk factors in the unadjusted analysis (p = 0.04). Conclusions MRSA transmission occurs with high frequency in the NICU during hospitalization with unidentified MRSA neonates. Caesarean section and nCPAP treatment were identified as risk factors for MRSA colonization. The MRSA outbreak was controlled through infection control procedures. PMID:23825581

Plasmid-Encoded Transferable mecB-Mediated Methicillin Resistance in Staphylococcus aureus

PubMed Central

van Alen, Sarah; Idelevich, Evgeny A.; Schleimer, Nina; Seggewiß, Jochen; Mellmann, Alexander; Kaspar, Ursula; Peters, Georg

2018-01-01

During cefoxitin-based nasal screening, phenotypically categorized methicillin-resistant Staphylococcus aureus (MRSA) was isolated and tested negative for the presence of the mecA and mecC genes as well as for the SCCmec-orfX junction region. The isolate was found to carry a mecB gene previously described for Macrococcus caseolyticus but not for staphylococcal species. The gene is flanked by β-lactam regulatory genes similar to mecR, mecI, and blaZ and is part of an 84.6-kb multidrug-resistance plasmid that harbors genes encoding additional resistances to aminoglycosides (aacA-aphD, aphA, and aadK) as well as macrolides (ermB) and tetracyclines (tetS). This further plasmidborne β-lactam resistance mechanism harbors the putative risk of acceleration or reacceleration of MRSA spread, resulting in broad ineffectiveness of β-lactams as a main therapeutic application against staphylococcal infections. PMID:29350135

Spatial Convergence of Three Dimensional Turbulent Flows

NASA Technical Reports Server (NTRS)

Park, Michael A.; Anderson, W. Kyle

2016-01-01

Finite-volume and finite-element schemes, both implemented within the FUN3D flow solver, are evaluated for several test cases described on the Turbulence-Modeling Resource (TMR) web site. The cases include subsonic flow over a hemisphere cylinder, subsonic flow over a swept bump configuration, and supersonic flow in a square duct. The finite- volume and finite-element schemes are both used to obtain solutions for the first two cases, whereas only the finite-volume scheme is used for the supersonic duct. For the hemisphere cylinder, finite-element solutions obtained on tetrahedral meshes are compared with finite- volume solutions on mixed-element meshes. For the swept bump, finite-volume solutions have been obtained for both hexahedral and tetrahedral meshes and are compared with finite-element solutions obtained on tetrahedral meshes. For the hemisphere cylinder and the swept bump, solutions are obtained on a series of meshes with varying grid density and comparisons are made between drag coefficients, pressure distributions, velocity profiles, and profiles of the turbulence working variable. The square duct shows small variation due to element type or the spatial accuracy of turbulence model convection. It is demonstrated that the finite-element scheme on tetrahedral meshes yields similar accuracy as the finite- volume scheme on mixed-element and hexahedral grids, and demonstrates less sensitivity to the mesh topology (biased tetrahedral grids) than the finite-volume scheme.

[Spread of genetically related methicillin-susceptible Staphylococcus aureus belonging to CC45, in healthy nasal carriers in Child Day Care Centers of Medellin, Colombia].

PubMed

Rodríguez-Tamayo, Erika Andrea; Ruiz-Cadavid, Alejandra; Sánchez-González, Leidy Maritza; García-Valencia, Natalia; Jiménez-Quiceno, Judy Natalia

2016-03-01

Colonization plays a major role in the epidemiology and pathogenesis of Staphylococcus aureus infections. The child population is one of the most susceptible to colonization; however, community and children studies are limited in Colombia. To assess the clonal relationship of S.aureus strains isolated from colonized children in eight day care centers (DCCs) from Medellin and to determine the presence of epidemiological characteristics in these populations. An observational cross-sectional study was conducted on a sample of 200 children aged from 6 months to 5 years attending eight DCCs in Medellin, Colombia, during 2011. Nasal samples were collected from each nostril. The isolates species and methicillin resistance were molecularly confirmed using nuc and mec genes. Genotypic analysis included SCCmec typing, spa typing, PFGE and MLST. Epidemiological information was obtained from the parents and analyzed using the statistics program SPSS 21.0 RESULTS: The colonization frequency in DCCs ranged from 16.7% (n=3) to 53.6% (n=15). Genetically related isolates were identified inside four DCCs. Half (50%) of the isolates were grouped in 3 clusters, which belonged to the clonal complexes CC45, CC30, and CC121. Molecular typing of isolates from colonized children and comparison among DCCs showed the spread of colonizing strains inside DCCs in Medellin; predominantly the CC45 clone, a successful child colonizer. Copyright © 2015 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

High incidence of oxacillin-susceptible mecA-positive Staphylococcus aureus (OS-MRSA) associated with bovine mastitis in China.

PubMed

Pu, WanXia; Su, Yang; Li, JianXi; Li, ChunHui; Yang, ZhiQiang; Deng, HaiPing; Ni, ChunXia

2014-01-01

Staphylococcus aureus is a main cause of bovine mastitis and a major pathogen affecting human health. The emergence and spread of methicillin-resistant Staphylococcus aureus (MRSA) has become a significant concern for both animal health and public health. This study investigated the incidence of MRSA in milk samples collected from dairy cows with clinical mastitis and characterized the MRSA isolates using antimicrobial susceptibility tests and genetic typing methods. In total, 103 S. aureus isolates were obtained from dairy farms in 4 different provinces in China, including Gansu, Shanghai, Sichuan, and Guizhou. Antimicrobial susceptibility testing of these isolates revealed that the resistance rates to penicillin and sulfamethoxazole were high, while the resistance rates to ciprofloxacin and vancomycin were low. Among the 103 isolates, 49 (47.6%) were found to be mecA-positive, indicating the high incidence of MRSA. However, 37 of the 49 mecA-positive isolates were susceptible to oxacillin as determined by antimicrobial susceptibility assays and were thus classified as oxacillin-susceptible mecA-positive S. aureus (OS-MRSA). These isolates could be misclassified as methicillin susceptible Staphylococcus aureus (MSSA) if genetic detection of mecA was not performed. Molecular characterization of selected mecA-positive isolates showed that they were all negative with Panton-Valentine leukocidin (PVL), but belonged to different spa types and SCCmec types. These results indicate that OS-MRSA is common in bovine mastitis in China and underscore the need for genetic methods (in addition to phenotypic tests) to accurately identify MRSA.

Analysis of Typing Methods for Epidemiological Surveillance of both Methicillin-Resistant and Methicillin-Susceptible Staphylococcus aureus Strains▿ †

PubMed Central

Faria, Nuno A.; Carrico, João A.; Oliveira, Duarte C.; Ramirez, Mário; de Lencastre, Hermínia

2008-01-01

Sequence-based methods for typing Staphylococcus aureus, such as multilocus sequence typing (MLST) and spa typing, have increased interlaboratory reproducibility, portability, and speed in obtaining results, but pulsed-field gel electrophoresis (PFGE), remains the method of choice in many laboratories due to the extensive experience with this methodology and the large body of data accumulated using the technique. Comparisons between typing methods have been overwhelmingly based on a qualitative assessment of the overall agreement of results and the relative discriminatory indexes. In this study, we quantitatively assess the congruence of the major typing methods for S. aureus, using a diverse collection of 198 S. aureus strains previously characterized by PFGE, spa typing, MLST, and, in the case of methicillin-resistant S. aureus (MRSA), SCCmec typing in order to establish the quantitative congruence between the typing methods. The results of most typing methods agree in that MRSA and methicillin-susceptible S. aureus (MSSA) differ in terms of diversity of genetic backgrounds, with MSSA being more diverse. Our results show that spa typing has a very good predictive power over the clonal relationships defined by eBURST, while PFGE is less accurate for that purpose but nevertheless provides better typeability and discriminatory power. The combination of PFGE and spa typing provided even better results. Based on these observations, we suggest the use of the conjugation of spa typing and PFGE typing for epidemiological surveillance studies, since this combination provides the ability to infer long-term relationships while maintaining the discriminatory power and typeability needed in short-term studies. PMID:17989188

Detection and Characterization of Staphylococcus aureus and Methicillin-Resistant S. aureus in Foods Confiscated in EU Borders

PubMed Central

Rodríguez-Lázaro, David; Oniciuc, Elena-Alexandra; García, Patricia G.; Gallego, David; Fernández-Natal, Isabel; Dominguez-Gil, Marta; Eiros-Bouza, José M.; Wagner, Martin; Nicolau, Anca I.; Hernández, Marta

2017-01-01

The aim of the study was to evaluate the potential role of the illegal entry of food in UE in the Methicillin-resistant S. aureus (MRSA) spread. We studied the prevalence and characteristics of Staphylococcus aureus and MRSA isolated from foods of animal origin confiscated from passengers on flights from 45 non-EU countries from 2012 to 2015 by the Border Authorities at Bilbao International Airport (Spain) and Vienna International Airport (Austria), as well as foods from open markets close to EU land borders. Of 868 food samples tested (diverse meat samples including antelope, duck, guinea pig, pork, rodents, turkey, dairy products, and eggs), 136 (15.7%) were positive for S. aureus and 26 (3.0%) for MRSA. All MRSA strains were mecA-positive. The prevalence of S. aureus-positive dairy samples among food confiscated at Bilbao International Airport was 64.6%, and this airport also had the highest value (11.8%) for MRSA-positive samples. The predominant sequence type was ST5 (30.8%), followed by ST8, ST1649, ST1, and other lineages were found to a lesser extent (ST7, ST22, ST72, ST97, and ST398). Six isolates tested positive for luk-PVL genes (SCCmec IV subtypes IVc and IVe). Enterotoxin profiling revealed that 19 MRSA strains were enterotoxigenic, harboring one or more se genes. The MRSA isolates positive for luk-PVL genes were not enterotoxigenic, and none of the isolates tested positive for enterotoxin E. We found 14 resistance profiles, and more than 69% of the MRSA isolates were resistant to three or more types of antimicrobial agents. This finding reveals both the wide diversity of the antimicrobial resistance found in the strains and the capacity to resist not only to beta-lactam drugs. One MRSA strain showed unusual characteristics: it was oxacillin-susceptible, harbored SCCmec V, and was positive for sed, seg, and sej but negative for PVL virulence factors. This study shows the presence of enterotoxigenic HA-, CA-, and LA-MRSA in foods illegally entering the EU, and highlights illegal importation of food as route of enterotoxigenic MRSA spread. Uncontrolled entry of food stuffs into the EU can be a relevant neglected route of MRSA dissemination. PMID:28785245

Methicillin-resistant Staphylococcus aureus (MRSA) is associated with low within-herd prevalence of intra-mammary infections in dairy cows: Genotyping of isolates.

PubMed

Luini, M; Cremonesi, P; Magro, G; Bianchini, V; Minozzi, G; Castiglioni, B; Piccinini, R

2015-08-05

Staphylococcus aureus is one of the most common mastitis-causing pathogens worldwide. In the last decade, livestock-associated methicillin-resistant S. aureus (LA-MRSA) infections have been described in several species, included the bovines. Hence, this paper investigates the diffusion of MRSA within Italian dairy herds; the strains were further characterized using a DNA microarray, which detects 330 different sequences, including the methicillin-resistance genes mecA and mecC and SCCmec typing. The analysis of overall patterns allows the assignment to Clonal Complexes (CC). Overall 163 S. aureus isolates, collected from quarter milk samples in 61 herds, were tested. MRSA strains were further processed using spa typing. Fifteen strains (9.2%), isolated in 9 herds (14.75%), carried mecA, but none harboured mecC. MRSA detection was significantly associated (P<0.011) with a within-herd prevalence of S. aureus intra-mammary infections (IMI) ≤5%. Ten MRSA strains were assigned to CC398, the remaining ones to CC97 (n=2), CC1 (n=2) or CC8 (n=1). In 3 herds, MRSA and MSSA co-existed: CC97-MRSA with CC398-MSSA, CC1-MRSA with CC8-MSSA and CC398-MRSA with CC126-MSSA. The results of spa typing showed an overall similar profile of the strains belonging to the same CC: t127-CC1, t1730-CC97, t899 in 8 out of 10 CC398. In the remaining 2 isolates a new spa type, t14644, was identified. The single CC8 was a t3092. The SCCmec cassettes were classified as type IV, type V or type IV/V composite. All or most strains harboured the genes encoding the β-lactamase operon and the tetracycline resistance. Streptogramin resistance gene was related to CC398. Enterotoxin and leukocidin genes were carried only by CC1, CC8 and CC97-MRSA. The persistence of MRSA clones characterized by broader host range, in epidemiologically unrelated areas and in dairy herds with low prevalence of S. aureus IMI, might enhance the risk for adaptation to human species. Copyright © 2015 Elsevier B.V. All rights reserved.

Large Outbreak Caused by Methicillin Resistant Staphylococcus pseudintermedius ST71 in a Finnish Veterinary Teaching Hospital – From Outbreak Control to Outbreak Prevention

PubMed Central

Grönthal, Thomas; Moodley, Arshnee; Nykäsenoja, Suvi; Junnila, Jouni; Guardabassi, Luca; Thomson, Katariina; Rantala, Merja

2014-01-01

Introduction The purpose of this study was to describe a nosocomial outbreak caused by methicillin resistant Staphylococcus pseudintermedius (MRSP) ST71 SCCmec II-III in dogs and cats at the Veterinary Teaching Hospital of the University of Helsinki in November 2010 – January 2012, and to determine the risk factors for acquiring MRSP. In addition, measures to control the outbreak and current policy for MRSP prevention are presented. Methods Data of patients were collected from the hospital patient record software. MRSP surveillance data were acquired from the laboratory information system. Risk factors for MRSP acquisition were analyzed from 55 cases and 213 controls using multivariable logistic regression in a case-control study design. Forty-seven MRSP isolates were analyzed by pulsed field gel electrophoresis and three were further analyzed with multi-locus sequence and SCCmec typing. Results Sixty-three MRSP cases were identified, including 27 infections. MRSPs from the cases shared a specific multi-drug resistant antibiogram and PFGE-pattern indicated clonal spread. Four risk factors were identified; skin lesion (OR = 6.2; CI95% 2.3–17.0, P = 0.0003), antimicrobial treatment (OR = 3.8, CI95% 1.0–13.9, P = 0.0442), cumulative number of days in the intensive care unit (OR = 1.3, CI95% 1.1–1.6, P = 0.0007) or in the surgery ward (OR = 1.1, CI95% 1.0–1.3, P = 0.0401). Tracing and screening of contact patients, enhanced hand hygiene, cohorting and barrier nursing, as well as cleaning and disinfection were used to control the outbreak. To avoid future outbreaks and spread of MRSP a search-and-isolate policy was implemented. Currently nearly all new MRSP findings are detected in screening targeted to risk patients on admission. Conclusion Multidrug resistant MRSP is capable of causing a large outbreak difficult to control. Skin lesions, antimicrobial treatment and prolonged hospital stay increase the probability of acquiring MRSP. Rigorous control measures were needed to control the outbreak. We recommend the implementation of a search-and-isolate policy to reduce the burden of MRSP. PMID:25333798

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1989-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1987-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Presence of the optrA Gene in Methicillin-Resistant Staphylococcus sciuri of Porcine Origin.

PubMed

Fan, Run; Li, Dexi; Wang, Yang; He, Tao; Feßler, Andrea T; Schwarz, Stefan; Wu, Congming

2016-12-01

A total of 57 methicillin-resistant Staphylococcus aureus (MRSA) isolates and 475 methicillin-resistant coagulase-negative staphylococci (MRCoNS) collected from pigs in the Guangdong province of China in 2014 were investigated for the presence of the novel oxazolidinone-phenicol resistance gene optrA The optrA gene was detected in 6.9% (n = 33) of the MRCoNS, all of which were Staphylococcus sciuri isolates, but in none of the MRSA isolates. Five optrA-carrying methicillin-resistant (MR) S. sciuri isolates also harbored the multiresistance gene cfr Pulsed-field gel electrophoresis (PFGE) and dru typing of the 33 optrA-carrying MR S. sciuri isolates revealed 25 patterns and 5 sequence types, respectively. S1 nuclease PFGE and Southern blotting confirmed that optrA was located in the chromosomal DNAs of 29 isolates, including 1 cfr-positive isolate. The remaining four isolates harbored a ∼35-kb pWo28-3-like plasmid on which optrA and cfr were located together with other resistance genes, as confirmed by sequence analysis. Six different types of genetic environments (types I to VI) of the chromosome-borne optrA genes were identified; these types had the optrA gene and its transcriptional regulator araC in common. Tn558 was found to be associated with araC-optrA in types II to VI. The optrA gene in types II and III was found in close proximity to the ccr gene complex of the respective staphylococcal cassette chromosome mec element (SCCmec). Since oxazolidinones are last-resort antimicrobial agents for the control of serious infections caused by methicillin-resistant staphylococci in humans, the location of the optrA gene close to the ccr complex is an alarming observation. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

Cloning and occurrence of czrC, a gene conferring cadmium and zinc resistance in methicillin-resistant Staphylococcus aureus CC398 isolates.

PubMed

Cavaco, L M; Hasman, H; Stegger, M; Andersen, P S; Skov, R; Fluit, A C; Ito, T; Aarestrup, F M

2010-09-01

We recently reported a phenotypic association between reduced susceptibility to zinc and methicillin resistance in Staphylococcus aureus CC398 isolates from Danish swine (F. M. Aarestrup, L. M. Cavaco, and H. Hasman, Vet. Microbiol. 142:455-457, 2009). The aim of this study was to identify the genetic determinant causing zinc resistance in CC398 and examine its prevalence in isolates of animal and human origin. Based on the sequence of the staphylococcal cassette chromosome mec (SCCmec) element from methicillin-resistant S. aureus (MRSA) CC398 strain SO385, a putative metal resistance gene was identified in strain 171 and cloned in S. aureus RN4220. Furthermore, 81 MRSA and 48 methicillin-susceptible S. aureus (MSSA) strains, isolated from pigs (31 and 28) and from humans (50 and 20) in Denmark, were tested for susceptibility to zinc chloride and for the presence of a putative resistance determinant, czrC, by PCR. The cloning of czrC confirmed that the zinc chloride and cadmium acetate MICs for isogenic constructs carrying this gene were increased compared to those for S. aureus RN4220. No difference in susceptibility to sodium arsenate, copper sulfate, or silver nitrate was observed. Seventy-four percent (n = 23) of the animal isolates and 48% (n = 24) of the human MRSA isolates of CC398 were resistant to zinc chloride and positive for czrC. All 48 MSSA strains from both human and pig origins were found to be susceptible to zinc chloride and negative for czrC. Our findings showed that czrC is encoding zinc and cadmium resistance in CC398 MRSA isolates, and that it is widespread both in humans and animals. Thus, resistance to heavy metals such as zinc and cadmium may play a role in the coselection of methicillin resistance in S. aureus.

Combination of Alpha-Melanocyte Stimulating Hormone with Conventional Antibiotics against Methicillin Resistant Staphylococcus aureus

PubMed Central

Singh, Madhuri; Gadepalli, Ravisekhar; Dhawan, Benu; Mukhopadhyay, Kasturi

2013-01-01

Our previous studies revealed that alpha-melanocyte stimulating hormone (α-MSH) is strongly active against Staphylococcus aureus (S. aureus) including methicillin resistant S. aureus (MRSA). Killing due to α-MSH occurred by perturbation of the bacterial membrane. In the present study, we investigated the in vitro synergistic potential of α-MSH with five selected conventional antibiotics viz., oxacillin (OX), ciprofloxacin (CF), tetracycline (TC), gentamicin (GM) and rifampicin (RF) against a clinical MRSA strain which carried a type III staphylococcal cassette chromosome mec (SCCmec) element and belonged to the sequence type (ST) 239. The strain was found to be highly resistant to OX (minimum inhibitory concentration (MIC) = 1024 µg/ml) as well as to other selected antimicrobial agents including α-MSH. The possibility of the existence of intracellular target sites of α-MSH was evaluated by examining the DNA, RNA and protein synthesis pathways. We observed a synergistic potential of α-MSH with GM, CF and TC. Remarkably, the supplementation of α-MSH with GM, CF and TC resulted in ≥64-, 8- and 4-fold reductions in their minimum bactericidal concentrations (MBCs), respectively. Apart from membrane perturbation, in this study we found that α-MSH inhibited ∼53% and ∼47% DNA and protein synthesis, respectively, but not RNA synthesis. Thus, the mechanistic analogy between α-MSH and CF or GM or TC appears to be the reason for the observed synergy between them. In contrast, α-MSH did not act synergistically with RF which may be due to its inability to inhibit RNA synthesis (<10%). Nevertheless, the combination of α-MSH with RF and OX showed an enhanced killing by ∼45% and ∼70%, respectively, perhaps due to the membrane disrupting properties of α-MSH. The synergistic activity of α-MSH with antibiotics is encouraging, and promises to restore the lost potency of discarded antibiotics. PMID:24040081

Finite element analysis of structural engineering problems using a viscoplastic model incorporating two back stresses

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R.

1993-01-01

The feasibility of a viscoplastic model incorporating two back stresses and a drag strength is investigated for performing nonlinear finite element analyses of structural engineering problems. To demonstrate suitability for nonlinear structural analyses, the model is implemented into a finite element program and analyses for several uniaxial and multiaxial problems are performed. Good agreement is shown between the results obtained using the finite element implementation and those obtained experimentally. The advantages of using advanced viscoplastic models for performing nonlinear finite element analyses of structural components are indicated.

Method and system for processing optical elements using magnetorheological finishing

DOEpatents

Menapace, Joseph Arthur; Schaffers, Kathleen Irene; Bayramian, Andrew James; Molander, William A

2012-09-18

A method of finishing an optical element includes mounting the optical element in an optical mount having a plurality of fiducials overlapping with the optical element and obtaining a first metrology map for the optical element and the plurality of fiducials. The method also includes obtaining a second metrology map for the optical element without the plurality of fiducials, forming a difference map between the first metrology map and the second metrology map, and aligning the first metrology map and the second metrology map. The method further includes placing mathematical fiducials onto the second metrology map using the difference map to form a third metrology map and associating the third metrology map to the optical element. Moreover, the method includes mounting the optical element in the fixture in an MRF tool, positioning the optical element in the fixture; removing the plurality of fiducials, and finishing the optical element.

Development and applications of a flat triangular element for thin laminated shells

NASA Astrophysics Data System (ADS)

Mohan, P.

Finite element analysis of thin laminated shells using a three-noded flat triangular shell element is presented. The flat shell element is obtained by combining the Discrete Kirchhoff Theory (DKT) plate bending element and a membrane element similar to the Allman element, but derived from the Linear Strain Triangular (LST) element. The major drawback of the DKT plate bending element is that the transverse displacement is not explicitly defined within the interior of the element. In the present research, free vibration analysis is performed both by using a lumped mass matrix and a so called consistent mass matrix, obtained by borrowing shape functions from an existing element, in order to compare the performance of the two methods. Several numerical examples are solved to demonstrate the accuracy of the formulation for both small and large rotation analysis of laminated plates and shells. The results are compared with those available in the existing literature and those obtained using the commercial finite element package ABAQUS and are found to be in good agreement. The element is employed for two main applications involving large flexible structures. The first application is the control of thermal deformations of a spherical mirror segment, which is a segment of a multi-segmented primary mirror used in a space telescope. The feasibility of controlling the surface distortions of the mirror segment due to arbitrary thermal fields, using discrete and distributed actuators, is studied. The second application is the analysis of an inflatable structure, being considered by the US Army for housing vehicles and personnel. The updated Lagrangian formulation of the flat shell element has been developed primarily for the nonlinear analysis of the tent structure, since such a structure is expected to undergo large deformations and rotations under the action of environmental loads like the wind and snow loads. The follower effects of the pressure load have been included in the updated Lagrangian formulation of the flat shell element and have been validated using standard examples in the literature involving deformation-dependent pressure loads. The element can be used to obtain the nonlinear response of the tent structure under wind and snow loads. (Abstract shortened by UMI.)

Natural frequencies of thin rectangular plates clamped on contour using the Finite Element Method

NASA Astrophysics Data System (ADS)

(Barboni Haţiegan, L.; Haţiegan, C.; Gillich, G. R.; Hamat, C. O.; Vasile, O.; Stroia, M. D.

2018-01-01

This paper presents the determining of natural frequencies of plates without and with damages using the finite element method of SolidWorks program. The first thirty natural frequencies obtained for thin rectangular rectangular plates clamped on contour without and with central damages a for different dimensions. The relative variation of natural frequency was determined and the obtained results by the finite element method (FEM) respectively relative variation of natural frequency, were graphically represented according to their vibration natural modes. Finally, the obtained results were compared.

Geometrically nonlinear analysis of layered composite plates and shells

NASA Technical Reports Server (NTRS)

Chao, W. C.; Reddy, J. N.

1983-01-01

A degenerated three dimensional finite element, based on the incremental total Lagrangian formulation of a three dimensional layered anisotropic medium was developed. Its use in the geometrically nonlinear, static and dynamic, analysis of layered composite plates and shells is demonstrated. A two dimenisonal finite element based on the Sanders shell theory with the von Karman (nonlinear) strains was developed. It is shown that the deflections obtained by the 2D shell element deviate from those obtained by the more accurate 3D element for deep shells. The 3D degenerated element can be used to model general shells that are not necessarily doubly curved. The 3D degenerated element is computationally more demanding than the 2D shell theory element for a given problem. It is found that the 3D element is an efficient element for the analysis of layered composite plates and shells undergoing large displacements and transient motion.

Limitless Analytic Elements

NASA Astrophysics Data System (ADS)

Strack, O. D. L.

2018-02-01

We present equations for new limitless analytic line elements. These elements possess a virtually unlimited number of degrees of freedom. We apply these new limitless analytic elements to head-specified boundaries and to problems with inhomogeneities in hydraulic conductivity. Applications of these new analytic elements to practical problems involving head-specified boundaries require the solution of a very large number of equations. To make the new elements useful in practice, an efficient iterative scheme is required. We present an improved version of the scheme presented by Bandilla et al. (2007), based on the application of Cauchy integrals. The limitless analytic elements are useful when modeling strings of elements, rivers for example, where local conditions are difficult to model, e.g., when a well is close to a river. The solution of such problems is facilitated by increasing the order of the elements to obtain a good solution. This makes it unnecessary to resort to dividing the element in question into many smaller elements to obtain a satisfactory solution.

An investigation of vancomycin minimum inhibitory concentration creep among methicillin-resistant Staphylococcus aureus strains isolated from pediatric patients and healthy children in Northern Taiwan.

PubMed

Chang, Chia-Ning; Lo, Wen-Tsung; Chan, Ming-Chin; Yu, Ching-Mei; Wang, Chih-Chien

2017-06-01

The phenomenon of vancomycin minimum inhibitory concentration (MIC) creep is an increasingly serious problem in the treatment of methicillin-resistant Staphylococcus aureus (MRSA) infections. In this study, we investigated the vancomycin and daptomycin MIC values of MRSA strains isolated from pediatric patients and MRSA colonized healthy children. Then, we assessed whether there was evidence of clonal dissemination for strains with an MIC to vancomycin of ≥ 1.5 μg/mL. We collected clinical MRSA isolates from pediatric patients and from healthy children colonized with MRSA during 2008-2012 at a tertiary medical center in northern Taiwan and obtained vancomycin and daptomycin MIC values using the Etest method. Pulse-field gel electrophoresis (PFGE) and staphylococcal cassette chromosome (SCCmec) typing were used to assess clonal dissemination for strains with an MIC to vancomycin of ≥ 1.5 μg/mL. A total 195 MRSA strains were included in this study; 87 were isolated patients with a clinical MRSA infection, and the other 108 strains from nasally colonized healthy children. Vancomycin MIC≥1.5 μg/mL was seen in more clinical isolates (60/87, 69%) than colonized isolates (32/108, 29.6%), p < 0.001. The PFGE typing of both strains revealed multiple pulsotypes. Vancomycin MIC creeps existed in both clinical MRSA isolates and colonized MRSA strains. Great diversity of PFGE typing was in both strains collected. There was no association between the clinical and colonized MRSA isolates with vancomycin MIC creep. Copyright © 2016. Published by Elsevier B.V.

Genome-wide analysis of the regulatory function mediated by the small regulatory psm-mec RNA of methicillin-resistant Staphylococcus aureus.

PubMed

Cheung, Gordon Y C; Villaruz, Amer E; Joo, Hwang-Soo; Duong, Anthony C; Yeh, Anthony J; Nguyen, Thuan H; Sturdevant, Daniel E; Queck, S Y; Otto, M

2014-07-01

Several methicillin resistance (SCCmec) clusters characteristic of hospital-associated methicillin-resistant Staphylococcus aureus (MRSA) strains harbor the psm-mec locus. In addition to encoding the cytolysin, phenol-soluble modulin (PSM)-mec, this locus has been attributed gene regulatory functions. Here we employed genome-wide transcriptional profiling to define the regulatory function of the psm-mec locus. The immune evasion factor protein A emerged as the primary conserved and strongly regulated target of psm-mec, an effect we show is mediated by the psm-mec RNA. Furthermore, the psm-mec locus exerted regulatory effects that were more moderate in extent. For example, expression of PSM-mec limited expression of mecA, thereby decreasing methicillin resistance. Our study shows that the psm-mec locus has a rare dual regulatory RNA and encoded cytolysin function. Furthermore, our findings reveal a specific mechanism underscoring the recently emerging concept that S. aureus strains balance pronounced virulence and high expression of antibiotic resistance. Published by Elsevier GmbH.

On conforming mixed finite element methods for incompressible viscous flow problems

NASA Technical Reports Server (NTRS)

Gunzburger, M. D; Nicolaides, R. A.; Peterson, J. S.

1982-01-01

The application of conforming mixed finite element methods to obtain approximate solutions of linearized Navier-Stokes equations is examined. Attention is given to the convergence rates of various finite element approximations of the pressure and the velocity field. The optimality of the convergence rates are addressed in terms of comparisons of the approximation convergence to a smooth solution in relation to the best approximation available for the finite element space used. Consideration is also devoted to techniques for efficient use of a Gaussian elimination algorithm to obtain a solution to a system of linear algebraic equations derived by finite element discretizations of linear partial differential equations.

Modelling of charged satellite motion in Earth's gravitational and magnetic fields

NASA Astrophysics Data System (ADS)

Abd El-Bar, S. E.; Abd El-Salam, F. A.

2018-05-01

In this work Lagrange's planetary equations for a charged satellite subjected to the Earth's gravitational and magnetic force fields are solved. The Earth's gravity, and magnetic and electric force components are obtained and expressed in terms of orbital elements. The variational equations of orbit with the considered model in Keplerian elements are derived. The solution of the problem in a fully analytical way is obtained. The temporal rate of changes of the orbital elements of the spacecraft are integrated via Lagrange's planetary equations and integrals of the normalized Keplerian motion obtained by Ahmed (Astron. J. 107(5):1900, 1994).

Attitude Control of Flexible Structures.

DTIC Science & Technology

1990-09-01

arm has been determined experimentally and compared with analytical * predictions obtained by using the GIFTS finite element analysis program. The...frequencies of the flexible arm have been determined experimentally and compared with analytical predictiens obtained by using the GIFTS finite element...exception of the first mode. Table V shows the difference between the frequencies obtained from the GIFTS program and the experimental values. TABLE

Methicillin-resistant and methicillin-susceptible Staphylococcus aureus in dairy sheep and in-contact humans: An intra-farm study.

PubMed

Carfora, V; Giacinti, G; Sagrafoli, D; Marri, N; Giangolini, G; Alba, P; Feltrin, F; Sorbara, L; Amoruso, R; Caprioli, A; Amatiste, S; Battisti, A

2016-06-01

Staphylococcus aureus is involved in a wide variety of diseases in humans and animals, and it is considered one of the most significant etiological agents of intramammary infection in dairy ruminants, causing both clinical and subclinical infections. In this study, the intra-farm prevalence and circulation of methicillin-resistant S. aureus (MRSA) and methicillin-susceptible S. aureus (MSSA) were investigated on an Italian dairy sheep farm previously identified as MRSA-positive by testing bulk tank milk (first isolation in 2012). Human samples (nasal swabs, hand skin samples, and oropharyngeal swabs) from 3 persons working in close contact with the animals were also collected, and the genetic characteristics and relatedness of the MRSA isolates from human and animal sources within the farm were investigated. After 2yr from the first isolation, we confirmed the presence of the same multidrug-resistant strain of MRSA sequence type (ST)1, clonal complex (CC)1, spa type t127, staphylococcal cassette chromosome mec (SCCmec) type IVa, showing identical pulsed field gel electrophoresis (PFGE) and resistance profiles at the farm level in bulk tank milk. Methicillin-resistant S. aureus isolates were detected in 2 out of 556 (0.34%) individual milk samples, whereas MSSA isolates were detected in 10 samples (1.8%). The MRSA were further isolated from udder skin samples from the 2 animals that were MRSA-positive in milk and in 2 of the 3 examined farm personnel. All MRSA isolates from both ovine and human samples belonged to ST(CC)1, spa type t127, SCCmec type IVa, with some isolates from animals harboring genes considered markers of human adaptation. In contrast, all MSSA isolates belonged to ruminant-associated CC130, ST700, spa type t528. Analysis by PFGE performed on selected MRSA isolates of human and animal origin identified 2 closely related (96.3% similarity) pulsotypes, displaying only minimal differences in gene profiles (e.g., presence of the immune evasion cluster genes). Although we observed low MRSA intra-farm prevalence, our findings highlight the importance of considering the possible zoonotic potential of CC1 livestock-associated MRSA, in view of the ability to persist over years at the farm level. Biosecurity measures and good hygiene practices could be useful to prevent MRSA spread at the farm level and to minimize exposure in the community and in categories related to farm animal industry (e.g., veterinarians, farmers, and farm workers). Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Composite Spectrometer Prisms

NASA Technical Reports Server (NTRS)

Breckinridge, J. B.; Page, N. A.; Rodgers, J. M.

1985-01-01

Efficient linear dispersive element for spectrometer instruments achieved using several different glasses in multiple-element prism. Good results obtained in both two-and three-element prisms using variety of different glass materials.

Investigations of Multiple Swirl-Venturi Fuel Injector Concepts: Recent Experimental Optical Measurement Results for 1-Point, 7-Point, and 9-Point Configurations

NASA Technical Reports Server (NTRS)

Hicks, Yolanda R.; Anderson, Robert C.; Tedder, Sarah A.; Tacina, Kathleen M.

2015-01-01

This paper presents results obtained during testing in optically-accessible, JP8-fueled, flame tube combustors using swirl-venturi lean direct injection (LDI) research hardware. The baseline LDI geometry has 9 fuel/air mixers arranged in a 3 x 3 array within a square chamber. 2-D results from this 9-element array are compared to results obtained in a cylindrical combustor using a 7-element array and a single element. In each case, the baseline element size remains the same. The effect of air swirler angle, and element arrangement on the presence of a central recirculation zone are presented. Only the highest swirl number air swirler produced a central recirculation zone for the single element swirl-venturi LDI and the 9-element LDI, but that same swirler did not produce a central recirculation zone for the 7-element LDI, possibly because of strong interactions due to element spacing within the array.

Methicillin-resistant Staphylococcus aureus (MRSA) in slaughtered pigs and abattoir workers in Italy.

PubMed

Normanno, Giovanni; Dambrosio, Angela; Lorusso, Vanessa; Samoilis, Georgios; Di Taranto, Pietro; Parisi, Antonio

2015-10-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a pathogen present in the hospital environment (HA-MRSA), in the community (CA-MRSA) and in livestock, including pigs (LA-MRSA). MRSA may enter the human food chain during slaughtering and may infect humans coming into direct contact with pigs or pork products. This study aimed to determine the prevalence and characteristics of MRSA isolated from pigs and workers at industrial abattoirs in southern Italy. A total of 215 pig nasal swabs were screened for the presence of MRSA using PCR. An MRSA isolate was detected from each mecA/nuc PCR-positive sample and characterized by spa-typing, Multi-Locus Sequence Typing, SCC-mec and Panton-Valentine Leukocidin (PVL), and also tested for the production of staphylococcal enterotoxins (SEs). Eighty-one MRSA isolates (37.6%) were obtained from the 215 pig nasal swabs; 37 of these isolates were further characterized, and showed 18 different spa-types and 8 different STs. The most frequently recovered STs were ST398 (CC398-t034, t011, t899, t1939 - 43.2%) followed by ST8 (CC8-t008, t064, t2953, t5270 - 24.3%) and ST1 (CC1-t127, t174, t2207 - 10.8%). Nine MRSA isolates were obtained from the 113 human swabs; the isolates showed 5 different spa-types and 5 different STs, including the novel ST2794 (t159). The most representative STs recovered were ST1 (CC1-t127) and ST398 (CC398-t034) (33.3%). None of the MRSA isolates showed the ability to produce SEs and PVL and all resulted resistant to two or more classes of antimicrobials. This study shows the great genetic diversity of MRSA strains in slaughtered pigs and in abattoir employees in Italy, and clearly demonstrates the need for improved hygiene standards to reduce the risk of occupational and food-borne infection linked to the handling/consumption of raw pork containing MRSA. Copyright © 2015 Elsevier Ltd. All rights reserved.

Finite element modeling of frictionally restrained composite interfaces

NASA Technical Reports Server (NTRS)

Ballarini, Roberto; Ahmed, Shamim

1989-01-01

The use of special interface finite elements to model frictional restraint in composite interfaces is described. These elements simulate Coulomb friction at the interface, and are incorporated into a standard finite element analysis of a two-dimensional isolated fiber pullout test. Various interfacial characteristics, such as the distribution of stresses at the interface, the extent of slip and delamination, load diffusion from fiber to matrix, and the amount of fiber extraction or depression are studied for different friction coefficients. The results are compared to those obtained analytically using a singular integral equation approach, and those obtained by assuming a constant interface shear strength. The usefulness of these elements in micromechanical modeling of fiber-reinforced composite materials is highlighted.

Stress-intensity factors for small surface and corner cracks in plates

NASA Technical Reports Server (NTRS)

Raju, I. S.; Atluri, S. N.; Newman, J. C., Jr.

1988-01-01

Three-dimensional finite-element and finite-alternating methods were used to obtain the stress-intensity factors for small surface and corner cracked plates subjected to remote tension and bending loads. The crack-depth-to-crack-length ratios (a/c) ranged from 0.2 to 1 and the crack-depth-to-plate-thickness ratios (a/t) ranged from 0.05 to 0.2. The performance of the finite-element alternating method was studied on these crack configurations. A study of the computational effort involved in the finite-element alternating method showed that several crack configurations could be analyzed with a single rectangular mesh idealization, whereas the conventional finite-element method requires a different mesh for each configuration. The stress-intensity factors obtained with the finite-element-alternating method agreed well (within 5 percent) with those calculated from the finite-element method with singularity elements.

Finite Element Modeling of the Buckling Response of Sandwich Panels

NASA Technical Reports Server (NTRS)

Rose, Cheryl A.; Moore, David F.; Knight, Norman F., Jr.; Rankin, Charles C.

2002-01-01

A comparative study of different modeling approaches for predicting sandwich panel buckling response is described. The study considers sandwich panels with anisotropic face sheets and a very thick core. Results from conventional analytical solutions for sandwich panel overall buckling and face-sheet-wrinkling type modes are compared with solutions obtained using different finite element modeling approaches. Finite element solutions are obtained using layered shell element models, with and without transverse shear flexibility, layered shell/solid element models, with shell elements for the face sheets and solid elements for the core, and sandwich models using a recently developed specialty sandwich element. Convergence characteristics of the shell/solid and sandwich element modeling approaches with respect to in-plane and through-the-thickness discretization, are demonstrated. Results of the study indicate that the specialty sandwich element provides an accurate and effective modeling approach for predicting both overall and localized sandwich panel buckling response. Furthermore, results indicate that anisotropy of the face sheets, along with the ratio of principle elastic moduli, affect the buckling response and these effects may not be represented accurately by analytical solutions. Modeling recommendations are also provided.

Array feed synthesis for correction of reflector distortion and Vernier Beamsteering

NASA Technical Reports Server (NTRS)

Blank, S. J.; Imbriale, W. A.

1986-01-01

An algorithmic procedure for the synthesis of planar array feeds for paraboloidal reflectors is described which simultaneously provides electronic correction of systematic reflector surface distortions as well as a Vernier electronic beamsteering capability. Simple rules of thumb for the optimum choice of planar array feed configuration (i.e., number and type of elements) are derived from a parametric study made using the synthesis procedure. A number of f/D ratios and distortion models were examined that are typical of large paraboloidal reflectors. Numerical results are presented showing that, for the range of distortion models considered, good on-axis gain restoration can be achieved with as few as seven elements. For beamsteering to +/- 1 beamwidth (BW), 19 elements are required. For arrays with either 7 or 19 elements, the results indicate that the use of high-aperture-efficiency elements (e.g., disk-on-rod and short backfire) in the array yields higher system gain than can be obtained with elements having lower aperture efficiency (e.g., open-ended waveguides). With 37 elements, excellent gain and beamsteering performance to +/- 1.5 BW are obtained independent of the assumed effective aperture of the array element. An approximate expression is derived for the focal-plane field distribution of the distorted reflector. Contour plots of the focal-plane fields are also presented for various distortion and beam scan angle cases. The results obtained show the effectiveness of the array feed approach.

A finite element analysis of viscoelastically damped sandwich plates

NASA Astrophysics Data System (ADS)

Ma, B.-A.; He, J.-F.

1992-01-01

A finite element analysis associated with an asymptotic solution method for the harmonic flexural vibration of viscoelastically damped unsymmetrical sandwich plates is given. The element formulation is based on generalization of the discrete Kirchhoff theory (DKT) element formulation. The results obtained with the first order approximation of the asymptotic solution presented here are the same as those obtained by means of the modal strain energy (MSE) method. By taking more terms of the asymptotic solution, with successive calculations and use of the Padé approximants method, accuracy can be improved. The finite element computation has been verified by comparison with an analytical exact solution for rectangular plates with simply supported edges. Results for the same plates with clamped edges are also presented.

Successful sulfur recovery in low sulfurate compounds obtained from the zinc industry: Evaporation-condensation method.

PubMed

Suárez-Gómez, Sergio Luis; Sánchez, Maria Luisa; Blanco, Francisco; Ayala, Julia; de Cos Juez, Francisco Javier

2017-08-15

The improvement of an evaporation-condensation method allows for successful recovery of elemental sulfur from sulfide concentrates from the zinc industry. Elemental sulfur can be obtained with this method in samples with a low (60%) sulfur content. The effects of heating temperature between 150°C and 250°C and heating time up to 120min on the recovery of sulfur are also studied. Elemental sulfur obtained in this way is of high purity and therefore, there is no need for further purification. The treatment of these industrial residues would help removing sulfur from the environment. Copyright © 2017 Elsevier B.V. All rights reserved.

Combined fast multipole-QR compression technique for solving electrically small to large structures for broadband applications

NASA Technical Reports Server (NTRS)

Jandhyala, Vikram (Inventor); Chowdhury, Indranil (Inventor)

2011-01-01

An approach that efficiently solves for a desired parameter of a system or device that can include both electrically large fast multipole method (FMM) elements, and electrically small QR elements. The system or device is setup as an oct-tree structure that can include regions of both the FMM type and the QR type. An iterative solver is then used to determine a first matrix vector product for any electrically large elements, and a second matrix vector product for any electrically small elements that are included in the structure. These matrix vector products for the electrically large elements and the electrically small elements are combined, and a net delta for a combination of the matrix vector products is determined. The iteration continues until a net delta is obtained that is within predefined limits. The matrix vector products that were last obtained are used to solve for the desired parameter.

Nonlinear earthquake analysis of reinforced concrete frames with fiber and Bernoulli-Euler beam-column element.

PubMed

Karaton, Muhammet

2014-01-01

A beam-column element based on the Euler-Bernoulli beam theory is researched for nonlinear dynamic analysis of reinforced concrete (RC) structural element. Stiffness matrix of this element is obtained by using rigidity method. A solution technique that included nonlinear dynamic substructure procedure is developed for dynamic analyses of RC frames. A predicted-corrected form of the Bossak-α method is applied for dynamic integration scheme. A comparison of experimental data of a RC column element with numerical results, obtained from proposed solution technique, is studied for verification the numerical solutions. Furthermore, nonlinear cyclic analysis results of a portal reinforced concrete frame are achieved for comparing the proposed solution technique with Fibre element, based on flexibility method. However, seismic damage analyses of an 8-story RC frame structure with soft-story are investigated for cases of lumped/distributed mass and load. Damage region, propagation, and intensities according to both approaches are researched.

Lumped element filters for electronic warfare systems

NASA Astrophysics Data System (ADS)

Morgan, D.; Ragland, R.

1986-02-01

Increasing demands which future generations of electronic warfare (EW) systems are to satisfy include a reduction in the size of the equipment. The present paper is concerned with lumped element filters which can make a significant contribution to the downsizing of advanced EW systems. Lumped element filter design makes it possible to obtain very small package sizes by utilizing classical low frequency inductive and capacitive components which are small compared to the size of a wavelength. Cost-effective, temperature-stable devices can be obtained on the basis of new design techniques. Attention is given to aspects of design flexibility, an interdigital filter equivalent circuit diagram, conditions for which the use of lumped element filters can be recommended, construction techniques, a design example, and questions regarding the application of lumped element filters to EW processing systems.

A New Expanded Mixed Element Method for Convection-Dominated Sobolev Equation

PubMed Central

Wang, Jinfeng; Li, Hong; Fang, Zhichao

2014-01-01

We propose and analyze a new expanded mixed element method, whose gradient belongs to the simple square integrable space instead of the classical H(div; Ω) space of Chen's expanded mixed element method. We study the new expanded mixed element method for convection-dominated Sobolev equation, prove the existence and uniqueness for finite element solution, and introduce a new expanded mixed projection. We derive the optimal a priori error estimates in L 2-norm for the scalar unknown u and a priori error estimates in (L 2)2-norm for its gradient λ and its flux σ. Moreover, we obtain the optimal a priori error estimates in H 1-norm for the scalar unknown u. Finally, we obtained some numerical results to illustrate efficiency of the new method. PMID:24701153

Novel quadrilateral elements based on explicit Hermite polynomials for bending of Kirchhoff-Love plates

NASA Astrophysics Data System (ADS)

Beheshti, Alireza

2018-03-01

The contribution addresses the finite element analysis of bending of plates given the Kirchhoff-Love model. To analyze the static deformation of plates with different loadings and geometries, the principle of virtual work is used to extract the weak form. Following deriving the strain field, stresses and resultants may be obtained. For constructing four-node quadrilateral plate elements, the Hermite polynomials defined with respect to the variables in the parent space are applied explicitly. Based on the approximated field of displacement, the stiffness matrix and the load vector in the finite element method are obtained. To demonstrate the performance of the subparametric 4-node plate elements, some known, classical examples in structural mechanics are solved and there are comparisons with the analytical solutions available in the literature.

Effect of joint spacing and joint dip on the stress distribution around tunnels using different numerical methods

NASA Astrophysics Data System (ADS)

Nikadat, Nooraddin; Fatehi Marji, Mohammad; Rahmannejad, Reza; Yarahmadi Bafghi, Alireza

2016-11-01

Different conditions may affect the stability of tunnels by the geometry (spacing and orientation) of joints in the surrounded rock mass. In this study, by comparing the results obtained by the three novel numerical methods i.e. finite element method (Phase2), discrete element method (UDEC) and indirect boundary element method (TFSDDM), the effects of joint spacing and joint dips on the stress distribution around rock tunnels are numerically studied. These comparisons indicate the validity of the stress analyses around circular rock tunnels. These analyses also reveal that for a semi-continuous environment, boundary element method gives more accurate results compared to the results of finite element and distinct element methods. In the indirect boundary element method, the displacements due to joints of different spacing and dips are estimated by using displacement discontinuity (DD) formulations and the total stress distribution around the tunnel are obtained by using fictitious stress (FS) formulations.

Static behavior of the weld in the joint of the steel support element using experiment and numerical modeling

NASA Astrophysics Data System (ADS)

Krejsa, M.; Brozovsky, J.; Mikolasek, D.; Parenica, P.; Koubova, L.

2018-04-01

The paper is focused on the numerical modeling of welded steel bearing elements using commercial software system ANSYS, which is based on the finite element method - FEM. It is important to check and compare the results of FEM analysis with the results of physical verification test, in which the real behavior of the bearing element can be observed. The results of the comparison can be used for calibration of the computational model. The article deals with the physical test of steel supporting elements, whose main purpose is obtaining of material, geometry and strength characteristics of the fillet and butt welds including heat affected zone in the basic material of welded steel bearing element. The pressure test was performed during the experiment, wherein the total load value and the corresponding deformation of the specimens under the load was monitored. Obtained data were used for the calibration of numerical models of test samples and they are necessary for further stress and strain analysis of steel supporting elements.

Role of the Euclidean signature in lattice calculations of quasidistributions and other nonlocal matrix elements

NASA Astrophysics Data System (ADS)

Briceño, Raúl A.; Hansen, Maxwell T.; Monahan, Christopher J.

2017-07-01

Lattice quantum chromodynamics (QCD) provides the only known systematic, nonperturbative method for first-principles calculations of nucleon structure. However, for quantities such as light-front parton distribution functions (PDFs) and generalized parton distributions (GPDs), the restriction to Euclidean time prevents direct calculation of the desired observable. Recently, progress has been made in relating these quantities to matrix elements of spatially nonlocal, zero-time operators, referred to as quasidistributions. Still, even for these time-independent matrix elements, potential subtleties have been identified in the role of the Euclidean signature. In this work, we investigate the analytic behavior of spatially nonlocal correlation functions and demonstrate that the matrix elements obtained from Euclidean lattice QCD are identical to those obtained using the Lehmann-Symanzik-Zimmermann reduction formula in Minkowski space. After arguing the equivalence on general grounds, we also show that it holds in a perturbative calculation, where special care is needed to identify the lattice prediction. Finally we present a proof of the uniqueness of the matrix elements obtained from Minkowski and Euclidean correlation functions to all order in perturbation theory.

Role of the Euclidean signature in lattice calculations of quasidistributions and other nonlocal matrix elements

DOE PAGES

Briceno, Raul A.; Hansen, Maxwell T.; Monahan, Christopher J.

2017-07-11

Lattice quantum chromodynamics (QCD) provides the only known systematic, nonperturbative method for first-principles calculations of nucleon structure. However, for quantities such as light-front parton distribution functions (PDFs) and generalized parton distributions (GPDs), the restriction to Euclidean time prevents direct calculation of the desired observable. Recently, progress has been made in relating these quantities to matrix elements of spatially nonlocal, zero-time operators, referred to as quasidistributions. Still, even for these time-independent matrix elements, potential subtleties have been identified in the role of the Euclidean signature. In this work, we investigate the analytic behavior of spatially nonlocal correlation functions and demonstrate thatmore » the matrix elements obtained from Euclidean lattice QCD are identical to those obtained using the Lehmann-Symanzik-Zimmermann reduction formula in Minkowski space. After arguing the equivalence on general grounds, we also show that it holds in a perturbative calculation, where special care is needed to identify the lattice prediction. Lastly, we present a proof of the uniqueness of the matrix elements obtained from Minkowski and Euclidean correlation functions to all order in perturbation theory.« less

Assessment of the leaching of metallic elements in the technology of solidification in aqueous solution.

PubMed

Rossetti, V Alunno; Di Palma, L; Medici, F

2002-01-01

Results are presented of experiments performed to optimize the solidification/stabilization system for metallic elements in aqueous solution. This system involves mixing cement and a solution of metallic elements in a conventional mixer: the paste thus obtained is transferred drop by drop into a recipient filled with an aqueous solution of NaOH at 20% by weight, in which it solidifies immediately. The separate use of chloride solutions of Li+, Cr3+, Pb2+ and Zn2+ makes it possible to obtain granules displaying various levels of compressive strength. Three different inertization matrices were used in the experiments, the first consisting solely of Portland cement, the second of Portland cement and a superplasticizer additive, and the third of Portland cement partially replaced with silica-fume and superplasticizer. The results of the tests performed showed a very low level of leaching into the alkaline solidification solution for Cr3+, the quantity leached being under 2% as against higher levels for the other metallic elements. For all the considered elements, the best results were obtained by using silica-fume in the inertization matrix.

Three-dimensional ceramic molding process based on microstereolithography for the production of piezoelectric energy harvesters

NASA Astrophysics Data System (ADS)

Maruo, Shoji; Sugiyama, Kenji; Daicho, Yuya; Monri, Kensaku

2014-03-01

A three-dimensional (3-D) molding process using a master polymer mold produced by microstereolithography has been developed for the production of piezoelectric ceramic elements. In this method, ceramic slurry is injected into a 3-D polymer mold via a centrifugal casting process. The polymer master mold is thermally decomposed so that complex 3-D piezoelectric ceramic elements can be produced. As an example of 3-D piezoelectric ceramic elements, we produced a spiral piezoelectric element that can convert multidirectional loads into a voltage. It was confirmed that a prototype of the spiral piezoelectric element could generate a voltage by applying a load in both parallel and lateral directions in relation to the helical axis. The power output of 123 pW was obtained by applying the maximum load of 2.8N at 2 Hz along the helical axis. In addition, to improve the performance of power generation, we utilized a two-step sintering process to obtain dense piezoelectric elements. As a result, we obtained a sintering body with relative density of 92.8%. Piezoelectric constant d31 of the sintered body attained to -40.0 pC/N. Furthermore we analyzed the open-circuit voltage of the spiral piezoelectric element using COMSOL multiphysics. As a result, it was found that use of patterned electrodes according to the surface potential distribution of the spiral piezoelectric element had a potential to provide high output voltage that was 20 times larger than that of uniform electrodes.

Array feed synthesis for correction of reflector distortion and Vernier beamsteering

NASA Technical Reports Server (NTRS)

Blank, Stephen J.; Imbriale, William A.

1988-01-01

An algorithmic procedure for the synthesis of planar array feeds for paraboloidal reflectors is described which simultaneously provides electronic correction of systematic reflector surface distortions as well as a Vernier electronic beamsteering capability. Simple rules of thumb for the optimum chioce of planar array feed configuration (i.e., the number and type of elements) are derived from a parametric study made using the synthesis procedure. A number of f/D ratios and distortion models were examined that are typical of large paraboloidal reflectors. Numerical results are presented showing that, for the range of distortion models considered, good on-axis gain restoration can be achieved with as few as seven elements. For beamsteering to +/- 1 beamwidth (BW), 19 elements are required. For arrays with either 7 or 19 elements, the results indicate that the use of high-aperture-efficiency elements (e.g., disk-on-rod and short backfire) in the array yields higher system gain than can be obtained with elements having lower aperture efficiency (e.g., open-ended waveguides). With 37 elements, excellent gain and beamsteering performance to +/- 1.5 BW are obtained independent of the assumed effective aperture of the array element. An approximate expression is derived for the focal-plane field distribution of the distorted reflector. Contour plots of the focal-plane fields are also presented for various distortion and beam scan angle cases. The results obtained show the effectiveness of the array feed approach.

Effect of bleaching gel in Ca, P and Zn content in tooth enamel evaluated by μ-EDXRF

NASA Astrophysics Data System (ADS)

Godinho, J.; Silveira, J.; Mata, A.; Carvalho, M. L.; Pessanha, S.

2014-10-01

The purpose of this in vitro study is to assess whether the elemental content of P, Ca and Zn in tooth enamel is altered when bleaching the teeth with bleaching gel. In order to perform this evaluation, sound vestibular surfaces of six anterior healthy teeth, extracted for periodontal or orthodontic reasons were used. Cuts were made in order to obtain 8 × 2 mm samples. Samples were then treated with the bleaching product (Opalescence PF 10%) accordingly to manufacturer instructions and stocked in artificial saliva between each application. The elemental content of each sample, before and after treatment was obtained by a portable micro Energy Dispersive X-ray Spectrometry (μ-EDXRF), making use of a polycapillary optic to obtain a focal spot of 100 μm for Fe-Kα. Quantitative calculations were obtained by WinAXIL compare mode method, using four standard reference materials. The obtained results show that no significant statistic differences were observed for the studied elements.

The C-patch - A small microstrip element

NASA Astrophysics Data System (ADS)

Kossiavas, G.; Papiernik, A.; Boisset, J. P.; Sauvan, M.

1989-02-01

A radiating element operating in the UHF and L-bands is presented. The element has dimensions smaller than those of conventional square or circular elements. For this type of antenna, good matching is obtained with a coaxial feed, and the omnidirectional radiation pattern is achieved using linear polarization. The bandwidth, however, remains somewhat narrow.

Characterizing the Effect of Shock on Isotopic Ages I: Ferroan Anorthosite Major Elements

NASA Technical Reports Server (NTRS)

Edmunson, J.; Cohen, B. A.; Spilde, M. N.

2009-01-01

A study underway at Marshall Space Flight Center is further characterizing the effects of shock on isotopic ages. The study was inspired by the work of L. Nyquist et al. [1, 2], but goes beyond their work by investigating the spatial distribution of elements in lunar ferroan anorthosites (FANs) and magnesium-suite (Mg-suite) rocks in order to understand the processes that may influence the radioisotope ages obtained on early lunar samples. This paper discusses the first data set (major elements) obtained on FANs 62236 and 67075.

Transient analysis using conical shell elements

NASA Technical Reports Server (NTRS)

Yang, J. C. S.; Goeller, J. E.; Messick, W. T.

1973-01-01

The use of the NASTRAN conical shell element in static, eigenvalue, and direct transient analyses is demonstrated. The results of a NASTRAN static solution of an externally pressurized ring-stiffened cylinder agree well with a theoretical discontinuity analysis. Good agreement is also obtained between the NASTRAN direct transient response of a uniform cylinder to a dynamic end load and one-dimensional solutions obtained using a method of characteristics stress wave code and a standing wave solution. Finally, a NASTRAN eigenvalue analysis is performed on a hydroballistic model idealized with conical shell elements.

Improvement of graphite crystal analyzer for light elements on X-ray fluorescence holography measurement

NASA Astrophysics Data System (ADS)

Happo, Naohisa; Hada, Takuma; Kubota, Atsushi; Ebisu, Yoshihiro; Hosokawa, Shinya; Kimura, Koji; Tajiri, Hiroo; Matsushita, Tomohiro; Hayashi, Kouichi

2018-05-01

Using a graphite crystal analyzer, focused monochromatic fluorescent X-rays can be obtained on an X-ray fluorescence holography (XFH) measurement. To measure the holograms of elements lighter than Ti, we improved a cylindrical-type crystal analyzer and constructed a small C-shaped analyzer. Using the constructed C-shaped analyzer, a Ca Kα hologram of a fluorite single crystal was obtained, from which we reconstructed a clear atomic image. The XFH measurements for the K, Ca, and Sc elements become possible using the presently constructed analyzer.

Elemental accumulation in lichen transplants in the neighborhood of thermal power stations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freitas, M.C.; Reis, M.A.; Alves, L.C.

1996-12-31

Lichens are known to be good monitors of air pollution because they easily absorb the chemical elements from air particles. Therefore, the exposure of clean lichens to a polluted region will result in an accumulation of elements emitted by the pollution sources in the lichens. In this work, samples of the lichen Parmelia sulcata were collected from olive tree stems and in a very clean area to gauge pollution. The goal is to obtain a quantitative relation between results obtained via lichens and via airborne particles.

A weak Galerkin generalized multiscale finite element method

DOE PAGES

Mu, Lin; Wang, Junping; Ye, Xiu

2016-03-31

In this study, we propose a general framework for weak Galerkin generalized multiscale (WG-GMS) finite element method for the elliptic problems with rapidly oscillating or high contrast coefficients. This general WG-GMS method features in high order accuracy on general meshes and can work with multiscale basis derived by different numerical schemes. A special case is studied under this WG-GMS framework in which the multiscale basis functions are obtained by solving local problem with the weak Galerkin finite element method. Convergence analysis and numerical experiments are obtained for the special case.

A weak Galerkin generalized multiscale finite element method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mu, Lin; Wang, Junping; Ye, Xiu

In this study, we propose a general framework for weak Galerkin generalized multiscale (WG-GMS) finite element method for the elliptic problems with rapidly oscillating or high contrast coefficients. This general WG-GMS method features in high order accuracy on general meshes and can work with multiscale basis derived by different numerical schemes. A special case is studied under this WG-GMS framework in which the multiscale basis functions are obtained by solving local problem with the weak Galerkin finite element method. Convergence analysis and numerical experiments are obtained for the special case.

Solar photospheric and coronal abundances from solar energetic particle measurements. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Breneman, H.

1985-01-01

Observations of solar energetic particles (SEP) from 22 solar flares in the 1977 to 1982 time period are reported. SEP abundances were obtained for all elements with 3 approximately less than Z approximately less than 30 except Li, Be, B, F, Sc, v, Co and Cu for which upper limits were obtained. Statistically meaningful abundances of several rare elements (P, Cl, K, Ti, and Mn) were determined for the first time, and the average abundance of the more abundant elements were determined with improved precision.

Epidemiology of Staphylococcus aureus harboring the mecA or Panton-Valentine leukocidin genes in hospitals in Java and Bali, Indonesia.

PubMed

Santosaningsih, Dewi; Santoso, Sanarto; Budayanti, Nyoman S; Kuntaman, Kuntaman; Lestari, Endang S; Farida, Helmia; Hapsari, Rebriarina; Hadi, Purnomo; Winarto, Winarto; Milheiriço, Catarina; Maquelin, Kees; Willemse-Erix, Diana; van Belkum, Alex; Severin, Juliëtte A; Verbrugh, Henri A

2014-04-01

Data of Staphylococcus aureus carriage in Indonesian hospitals are scarce. Therefore, the epidemiology of S. aureus among surgery patients in three academic hospitals in Indonesia was studied. In total, 366 of 1,502 (24.4%) patients carried S. aureus. The methicillin-resistant S. aureus (MRSA) carriage rate was 4.3%, whereas 1.5% of the patients carried Panton-Valentine leukocidin (PVL)-positive methicillin-sensitive S. aureus (MSSA). Semarang and Malang city (odds ratio [OR] 9.4 and OR 9.0), being male (OR 2.4), hospitalization for more than 5 days (OR 11.708), and antibiotic therapy during hospitalization (OR 2.6) were independent determinants for MRSA carriage, whereas prior hospitalization (OR 2.5) was the only one risk factor for PVL-positive MSSA carriage. Typing of MRSA strains by Raman spectroscopy showed three large clusters assigned type 21, 24, and 38, all corresponding to ST239-MRSA-SCCmec type III. In conclusion, MRSA and PVL-positive MSSA are present among patients in surgical wards in Indonesian academic hospitals.

A fatal infection caused by sequence type 398 methicillin-resistant Staphylococcus aureus carrying the Panton-Valentine leukocidin gene: A case report in Japan.

PubMed

Koyama, Hiroshi; Sanui, Masamitsu; Saga, Tomoo; Harada, Sohei; Ishii, Yoshikazu; Tateda, Kazuhiro; Lefor, Alan Kawarai

2015-07-01

Methicillin-resistant Staphylococcus aureus (MRSA) has now been recognized as a common pathogen in the community. Sequence type (ST) 398 MRSA is generally considered as an emerging zoonotic agent spreading among livestock and personnel who have direct contact with animals, mainly in Europe. A 37-year-old Chinese woman receiving steroid therapy for systemic lupus erythematosus with general fatigue and myalgia was brought to the emergency department in critical condition. Her condition deteriorated despite aggressive management and she died on day 7. Her blood culture revealed ST398 MRSA-SCCmec V with Panton-Valentine Leukocidin (PVL) gene. This is the first case report of a fatal infection caused by this lineage. According to the results of molecular analyses, the isolate from this particular patient's blood was genetically close to a lineage detected in China, and is less likely to be related to an animal-associated lineage. Copyright © 2015 Japanese Society of Chemotherapy and The Japanese Association for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Epidemiology of Staphylococcus aureus Harboring the mecA or Panton-Valentine Leukocidin Genes in Hospitals in Java and Bali, Indonesia

PubMed Central

Santosaningsih, Dewi; Santoso, Sanarto; Budayanti, Nyoman S.; Kuntaman, Kuntaman; Lestari, Endang S.; Farida, Helmia; Hapsari, Rebriarina; Hadi, Purnomo; Winarto, Winarto; Milheiriço, Catarina; Maquelin, Kees; Willemse-Erix, Diana; van Belkum, Alex; Severin, Juliëtte A.; Verbrugh, Henri A.

2014-01-01

Data of Staphylococcus aureus carriage in Indonesian hospitals are scarce. Therefore, the epidemiology of S. aureus among surgery patients in three academic hospitals in Indonesia was studied. In total, 366 of 1,502 (24.4%) patients carried S. aureus. The methicillin-resistant S. aureus (MRSA) carriage rate was 4.3%, whereas 1.5% of the patients carried Panton-Valentine leukocidin (PVL)-positive methicillin-sensitive S. aureus (MSSA). Semarang and Malang city (odds ratio [OR] 9.4 and OR 9.0), being male (OR 2.4), hospitalization for more than 5 days (OR 11.708), and antibiotic therapy during hospitalization (OR 2.6) were independent determinants for MRSA carriage, whereas prior hospitalization (OR 2.5) was the only one risk factor for PVL-positive MSSA carriage. Typing of MRSA strains by Raman spectroscopy showed three large clusters assigned type 21, 24, and 38, all corresponding to ST239-MRSA-SCCmec type III. In conclusion, MRSA and PVL-positive MSSA are present among patients in surgical wards in Indonesian academic hospitals. PMID:24567320

Low occurrence of the new species Staphylococcus argenteus in a Staphylococcus aureus collection of human isolates from Belgium.

PubMed

Argudín, M A; Dodémont, M; Vandendriessche, S; Rottiers, S; Tribes, C; Roisin, S; de Mendonça, R; Nonhoff, C; Deplano, A; Denis, O

2016-06-01

Staphylococcus argenteus is a novel Staphylococcus species closely related to Staphylococcus aureus that has been recently described. In this study, we investigated the proportion and the characteristics of S. argenteus recovered from humans in Belgium. S. aureus. human isolates collected in Belgium from 2006 to 2015 (n = 1,903) were retrospectively characterised via the presence of non-pigmented colonies on chocolate agar, spa typing and rpoB sequencing to determine if some of them were in fact S. argenteus. Out of 73 strains non-pigmented on chocolate plates, 3 isolates (0.16 %) showed rpoB sequences, in addition to spa and sequence types (ST2250/t5787, ST2250/t6675, ST3240/t6675), related to S. argenteus. Two of them were methicillin-resistant, harbouring a SCCmec type IV. The three S. argenteus isolates carried genes (sak, scn) of the immune evasion cluster. This first Belgian nationwide analysis showed a low occurrence of S. argenteus. Further studies should be conducted to identify the distribution range and the clinical impact of this new species.

47 CFR 51.501 - Scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.501 Scope. (a) The rules in this subpart apply to the pricing of network elements, interconnection, and methods of obtaining access to unbundled elements, including physical collocation and virtual...

Contamination of public buses with MRSA in Lisbon, Portugal: a possible transmission route of major MRSA clones within the community.

PubMed

Conceição, Teresa; Diamantino, Fernanda; Coelho, Céline; de Lencastre, Hermínia; Aires-de-Sousa, Marta

2013-01-01

In a previous study we have shown that public buses in Oporto, the second largest city in Portugal, were highly contaminated with MRSA. Here we describe the results of a similar study performed in another urban area of Portugal-Lisbon, the capital. Between May 2011 and May 2012, hand touched surfaces of 199 public buses in Lisbon were screened for MRSA contamination. Subsequently, the hands of 575 passengers who frequently use these bus lines were also screened. All hand carriers of MRSA were further screened for nasal carriage. The isolates were characterized by PFGE, staphylococcal cassette chromosome (SCC) mec typing, spa typing, MLST and were tested for the presence of mecA, Panton-Valentine leukocidin and arginine catabolic mobile element genes. MRSA contamination was shown in 72 buses (36.2%). The majority of the isolates belonged to three major clones: Clone A was identified as EMRSA-15 defined by pattern PFGE A, spa types t2357/t747/t025/t379/t910, ST22, and SCCmec IVh (n = 21; 29%). Clone B was the New York/Japan clone characterized by PFGE B-t002/t10682-ST5-II (n = 15; 21%). Clone C included isolates with characteristics of the international community-acquired USA300 or related clones, PFGE C-t008-ST8-IVa/IVc/IVg/IVnt/VI (n = 19; 26%). The first two clones are currently the two major lineages circulating in Portuguese hospitals. The hands of 15 individuals were contaminated with MRSA belonging to the nosocomial clones A or B. Eleven of these individuals were not nasal carriers of MRSA and all but one had travelled by public transportation, namely by bus, prior to sampling. In conclusion, public buses in two major cities in Portugal are often contaminated with MRSA representing clones dominant in hospitals in the particular geographic area. MRSA contamination of public transport and the transfer of the bacteria to the hands of passengers may represent a route through which hospital-acquired MRSA clones may spread to the community.

A comparison of the techniques of PIXE, PIGE and INAA by reference to the elemental analysis of porcine brain samples

NASA Astrophysics Data System (ADS)

Stedman, J. D.; Spyrou, N. M.

1994-12-01

The trace element concentrations in porcine brain samples as determined by particle-induced X-ray emission (PIXE) analysis, instrumental neutron activation analysis (INAA) and particle-induced gamma-ray emission (PIGE) analysis are compared. The matrix composition was determined by Rutherford backscattering (RBS). Al, Si, P, S, Cl, K, Ca, Mn, Fe and Cd were determined by PIXE analysis Na, K, Sc, Fe, Co, Zn, As, Br, Rb, and Cs by INAA and Na, Mg and Fe by PIGE analysis. The bulk elements C, N, O, Na Cl and S were found by RBS analysis. Elemental concentrations are obtained using the comparator method of analysis rather than an absolute method, the validity which is examined by comparing the elemental concentrations obtained in porcine brain using two separate certified reference materials.

Equivalent Circuit Parameter Calculation of Interior Permanent Magnet Motor Involving Iron Loss Resistance Using Finite Element Method

NASA Astrophysics Data System (ADS)

Yamazaki, Katsumi

In this paper, we propose a method to calculate the equivalent circuit parameters of interior permanent magnet motors including iron loss resistance using the finite element method. First, the finite element analysis considering harmonics and magnetic saturation is carried out to obtain time variations of magnetic fields in the stator and the rotor core. Second, the iron losses of the stator and the rotor are calculated from the results of the finite element analysis with the considerations of harmonic eddy current losses and the minor hysteresis losses of the core. As a result, we obtain the equivalent circuit parameters i.e. the d-q axis inductance and the iron loss resistance as functions of operating condition of the motor. The proposed method is applied to an interior permanent magnet motor to calculate the characteristics based on the equivalent circuit obtained by the proposed method. The calculated results are compared with the experimental results to verify the accuracy.

Structural Equation Modelling of Multiple Facet Data: Extending Models for Multitrait-Multimethod Data

ERIC Educational Resources Information Center

Bechger, Timo M.; Maris, Gunter

2004-01-01

This paper is about the structural equation modelling of quantitative measures that are obtained from a multiple facet design. A facet is simply a set consisting of a finite number of elements. It is assumed that measures are obtained by combining each element of each facet. Methods and traits are two such facets, and a multitrait-multimethod…

Mechanical behaviour of pressed and sintered CP Ti and Ti-6Al-7Nb alloy obtained from master alloy addition powder.

PubMed

Bolzoni, L; Weissgaerber, T; Kieback, B; Ruiz-Navas, E M; Gordo, E

2013-04-01

The Ti-6Al-7Nb alloy was obtained using the blending elemental approach with a master alloy and elemental titanium powders. Both the elemental titanium and the Ti-6Al-7Nb powders were characterised using X-ray diffraction, differential thermal analysis and dilatometry. The powders were processed using the conventional powder metallurgy route that includes uniaxial pressing and sintering. The trend of the relative density with the sintering temperature and the microstructural evolution of the materials sintered at different temperatures were analysed using scanning electron microscopy and X-ray diffraction. A minimum sintering temperature of 1200°C has to be used to ensure the homogenisation of the alloying elements and to obtain a pore structure composed of spherical pores. The sintered samples achieve relative density values that are typical for powder metallurgy titanium and no intermetallic phases were detected. Mechanical properties comparable to those specified for wrought Ti-6Al-7Nb medical devices are normally obtained. Therefore, the produced materials are promising candidates for load bearing applications as implant materials. Copyright © 2013 Elsevier Ltd. All rights reserved.

Analysis of the soil reinforcement by using geotextile on the pile of Medan - Kualanamu of highway project (STA 35 + 901) with the finite element method

NASA Astrophysics Data System (ADS)

Puji Hastuty, Ika; Roesyanto; Manulang, Agave

2018-02-01

Consolidation is the process of discharge of water from the soil through pore cavity. Poor subgrade condition which is in the form of plates, is necessary to be repaired so that the subgrade will be able to support the load of construction. One method used as soil improvement is by geotextile. The type of geotextile used on the road construction project (STA 35 + 901) Medan Kualanamu freeway is PP woven polypropleen geotextile. This study aims to determine the magnitude of the settlement, horizontal deformation, tensile strength of geotextile by using finite element method that affect the length of time the land decline to reach 90% consolidation or in other words does not decrease again or is considered zero. The results obtained from the calculation of this study obtained a decrease that occurred using geotextile with finite element method of 0.45 m, the horizontal deformation obtained by using the most extreme elemental method with geotextile was 0.08 m while the horizontal deformation occurring with no geotextile was 0.09 m and the tensile stress obtained by the geotextile tensile stress calculation was 19.51 KN/m2.

Selected Trace Element Concentrations in Peat Used for Cosmetic Production - A Case Study from Southern Poland

NASA Astrophysics Data System (ADS)

Glina, Bartłomiej

2016-12-01

The aim of the study was to assess the concentration of selected trace elements in organic soils used as a source to obtain a unique peat extract for cosmetics production. Peat material for laboratory analysis were collected from fen peatland located in the Prosna River Valley (Borek village). Studied peatland is managed by "Torf Corporation" company as a source of material to obtain peat extract for cosmetics production. In the collected soil samples (four soil profiles) Zn, Cu and Pb concentrations were determined by using atomic absorption spectrometer SpectraAA 220 (Varian), after acid digestion. Obtained results showed that the highest concentrations of selected trace elements were recorded in the surface horizons of organic soils. This fact might be the results of Prosna river flooding or air deposition. Howevere, according to the new Polish regulations (Ordinance of the Minister for Environment 01.09.2016 - the way of conducting contamination assessment of the earth surface), the content of trace elements in the examined soils was greatly belowe the permissible limit for areas from group IV (mine lands). Thus, described soils are proper to obtain peat extract used as a component in cosmetic production.

Trace elements in unconventional animals: A 40-year experience.

PubMed

Carpenè, Emilio; Andreani, Giulia; Isani, Gloria

2017-09-01

The role of trace elements in animal health has attracted increasing interest in recent years. The essentiality and toxicity of these elements have been extensively investigated in humans, laboratory animal models and partially in domestic animals, whereas little is known about trace element metabolism in most living organisms. Forty years ago our research started on Cd metabolism in molluscs, thereafter expanding to Zn, Cu, and Fe metabolism in many unconventional animal species of veterinary interest. This review summarizes the main results obtained over this long period of time: some of the findings are original and have not been published to date. They are discussed in more detail and compared with data obtained in conventional animals, including man. Copyright © 2017 Elsevier GmbH. All rights reserved.

Setting up virgin stress conditions in discrete element models.

PubMed

Rojek, J; Karlis, G F; Malinowski, L J; Beer, G

2013-03-01

In the present work, a methodology for setting up virgin stress conditions in discrete element models is proposed. The developed algorithm is applicable to discrete or coupled discrete/continuum modeling of underground excavation employing the discrete element method (DEM). Since the DEM works with contact forces rather than stresses there is a need for the conversion of pre-excavation stresses to contact forces for the DEM model. Different possibilities of setting up virgin stress conditions in the DEM model are reviewed and critically assessed. Finally, a new method to obtain a discrete element model with contact forces equivalent to given macroscopic virgin stresses is proposed. The test examples presented show that good results may be obtained regardless of the shape of the DEM domain.

Setting up virgin stress conditions in discrete element models

PubMed Central

Rojek, J.; Karlis, G.F.; Malinowski, L.J.; Beer, G.

2013-01-01

In the present work, a methodology for setting up virgin stress conditions in discrete element models is proposed. The developed algorithm is applicable to discrete or coupled discrete/continuum modeling of underground excavation employing the discrete element method (DEM). Since the DEM works with contact forces rather than stresses there is a need for the conversion of pre-excavation stresses to contact forces for the DEM model. Different possibilities of setting up virgin stress conditions in the DEM model are reviewed and critically assessed. Finally, a new method to obtain a discrete element model with contact forces equivalent to given macroscopic virgin stresses is proposed. The test examples presented show that good results may be obtained regardless of the shape of the DEM domain. PMID:27087731

24 CFR 234.26 - Project requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... mortgagor obtains a title insurance policy that reflects the condominium regime. (2) The mortgagor has good...) Convert common elements into additional units or limited common elements; (3) Withdraw land from the condominium; (4) Use easements through the common elements for the purpose of making improvements within the...

24 CFR 234.26 - Project requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... mortgagor obtains a title insurance policy that reflects the condominium regime. (2) The mortgagor has good...) Convert common elements into additional units or limited common elements; (3) Withdraw land from the condominium; (4) Use easements through the common elements for the purpose of making improvements within the...

Membrane triangles with corner drilling freedoms. II - The ANDES element

NASA Technical Reports Server (NTRS)

Felippa, Carlos A.; Militello, Carmelo

1992-01-01

This is the second article in a three-part series on the construction of 3-node, 9-dof membrane elements with normal-to-its-plane rotational freedoms (the so-called drilling freedoms) using parametrized variational principles. In this part, one such element is derived within the context of the assumed natural deviatoric strain (ANDES) formulation. The higher-order strains are obtained by constructing three parallel-to-sides pure-bending modes from which natural strains are obtained at the corner points and interpolated over the element. To attain rank sufficiency, an additional higher-order 'torsional' mode, corresponding to equal hierarchical rotations at each corner with all other motions precluded, is incorporated. The resulting formulation has five free parameters. When these parameters are optimized against pure bending by energy balance methods, the resulting element is found to coalesce with the optimal EFF element derived in Part I. Numerical integration as a strain filtering device is found to play a key role in this achievement.

Nonlinear Earthquake Analysis of Reinforced Concrete Frames with Fiber and Bernoulli-Euler Beam-Column Element

PubMed Central

Karaton, Muhammet

2014-01-01

A beam-column element based on the Euler-Bernoulli beam theory is researched for nonlinear dynamic analysis of reinforced concrete (RC) structural element. Stiffness matrix of this element is obtained by using rigidity method. A solution technique that included nonlinear dynamic substructure procedure is developed for dynamic analyses of RC frames. A predicted-corrected form of the Bossak-α method is applied for dynamic integration scheme. A comparison of experimental data of a RC column element with numerical results, obtained from proposed solution technique, is studied for verification the numerical solutions. Furthermore, nonlinear cyclic analysis results of a portal reinforced concrete frame are achieved for comparing the proposed solution technique with Fibre element, based on flexibility method. However, seismic damage analyses of an 8-story RC frame structure with soft-story are investigated for cases of lumped/distributed mass and load. Damage region, propagation, and intensities according to both approaches are researched. PMID:24578667

A simple and efficient shear-flexible plate bending element

NASA Technical Reports Server (NTRS)

Chaudhuri, Reaz A.

1987-01-01

A shear-flexible triangular element formulation, which utilizes an assumed quadratic displacement potential energy approach and is numerically integrated using Gauss quadrature, is presented. The Reissner/Mindlin hypothesis of constant cross-sectional warping is directly applied to the three-dimensional elasticity theory to obtain a moderately thick-plate theory or constant shear-angle theory (CST), wherein the middle surface is no longer considered to be the reference surface and the two rotations are replaced by the two in-plane displacements as nodal variables. The resulting finite-element possesses 18 degrees of freedom (DOF). Numerical results are obtained for two different numerical integration schemes and a wide range of meshes and span-to-thickness ratios. These, when compared with available exact, series or finite-element solutions, demonstrate accuracy and rapid convergence characteristics of the present element. This is especially true in the case of thin to very thin plates, when the present element, used in conjunction with the reduced integration scheme, outperforms its counterpart, based on discrete Kirchhoff constraint theory (DKT).

The L sub 1 finite element method for pure convection problems

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan

1991-01-01

The least squares (L sub 2) finite element method is introduced for 2-D steady state pure convection problems with smooth solutions. It is proven that the L sub 2 method has the same stability estimate as the original equation, i.e., the L sub 2 method has better control of the streamline derivative. Numerical convergence rates are given to show that the L sub 2 method is almost optimal. This L sub 2 method was then used as a framework to develop an iteratively reweighted L sub 2 finite element method to obtain a least absolute residual (L sub 1) solution for problems with discontinuous solutions. This L sub 1 finite element method produces a nonoscillatory, nondiffusive and highly accurate numerical solution that has a sharp discontinuity in one element on both coarse and fine meshes. A robust reweighting strategy was also devised to obtain the L sub 1 solution in a few iterations. A number of examples solved by using triangle and bilinear elements are presented.

Determination of apparent coupling factors for adhesive bonded acrylic plates using SEAL approach

NASA Astrophysics Data System (ADS)

Pankaj, Achuthan. C.; Shivaprasad, M. V.; Murigendrappa, S. M.

2018-04-01

Apparent coupling loss factors (CLF) and velocity responses has been computed for two lap joined adhesive bonded plates using finite element and experimental statistical energy analysis like approach. A finite element model of the plates has been created using ANSYS software. The statistical energy parameters have been computed using the velocity responses obtained from a harmonic forced excitation analysis. Experiments have been carried out for two different cases of adhesive bonded joints and the results have been compared with the apparent coupling factors and velocity responses obtained from finite element analysis. The results obtained from the studies signify the importance of modeling of adhesive bonded joints in computation of the apparent coupling factors and its further use in computation of energies and velocity responses using statistical energy analysis like approach.

Influence of Finite Element Software on Energy Release Rates Computed Using the Virtual Crack Closure Technique

NASA Technical Reports Server (NTRS)

Krueger, Ronald; Goetze, Dirk; Ransom, Jonathon (Technical Monitor)

2006-01-01

Strain energy release rates were computed along straight delamination fronts of Double Cantilever Beam, End-Notched Flexure and Single Leg Bending specimens using the Virtual Crack Closure Technique (VCCT). Th e results were based on finite element analyses using ABAQUS# and ANSYS# and were calculated from the finite element results using the same post-processing routine to assure a consistent procedure. Mixed-mode strain energy release rates obtained from post-processing finite elem ent results were in good agreement for all element types used and all specimens modeled. Compared to previous studies, the models made of s olid twenty-node hexahedral elements and solid eight-node incompatible mode elements yielded excellent results. For both codes, models made of standard brick elements and elements with reduced integration did not correctly capture the distribution of the energy release rate acr oss the width of the specimens for the models chosen. The results suggested that element types with similar formulation yield matching results independent of the finite element software used. For comparison, m ixed-mode strain energy release rates were also calculated within ABAQUS#/Standard using the VCCT for ABAQUS# add on. For all specimens mod eled, mixed-mode strain energy release rates obtained from ABAQUS# finite element results using post-processing were almost identical to re sults calculated using the VCCT for ABAQUS# add on.

[Measurement of the status of trace elements in cattle using liver biopsy samples].

PubMed

Ouweltjes, W; de Zeeuw, A C; Moen, A; Counotte, G H M

2007-02-01

Serum, plasma, or urine samples are usually used for the measurement of the trace elements copper; zinc, iron, selenium, because these samples are easy to obtain; however; these samples are not always appropriate. For example, it is not possible to measure molybdenum, the major antagonist of copper; in blood or urine. Therefore measurement of trace elements in liver tissue is considered the gold standard. For the assessment of selenium the method of choice remains determination of glutathion peroxidase in erythrocytes and for the assessment of magnesium determination of magnesium in urine. We determined the accuracy and repeatability of measuring trace elements in liver biopsies and whole liver homogenates. The levels of trace elements measured were similar in both preparations (92% agreement). Liver biopsy in live animals is a relatively simple procedure but not common in The Netherlands. Reference levels of trace elements, classified as too low, low, adequate, high, and too high, were established on the basis of our research and information in the literature. In a second study we investigated the practical aspects of obtaining liver tissue samples and their use. Samples were collected from cattle on a commercial dairy farm. Liver biopsy provided additional information to that obtained from serum and urine samples. We prepared a biopsy protocol and a test package, which we tested on 14 farms where an imbalance of trace minerals was suspected. Biopsy samples taken from 4 to 6 animals revealed extreme levels of trace elements.

The Motion of Magnetic Elements in and around Sunspot Penumbrae

NASA Astrophysics Data System (ADS)

Grigor'ev, V. M.; Ermakova, L. V.

2018-01-01

Structural magnetic elements observed in sunspot penumbrae are employed as indicators of motions occurring in and around penumbrae. The analysis presented here is base on SDO/HMI continuum images and magnetograms of the line-of-sight field obtained for the active region NOAA 11117. In a first approximation, the penumbral magnetic fields can be considered alternating spines and interspine filaments. In the plane of the sky, spines are thin radial elements with higher field strengths and lower magnetic-field inclinations compared with those in surrounding areas. It is confirmed that spines first appear as protrusions of the umbra magnetic fields visible in magnetograms, and then develop simultaneously with the growth of the penumbra. The departure of magnetic elements from penumbrae as a result of the detachment of the ends of spines begin 1-1.5 h after the spine formation. Inmature penumbrae, magnetic elements emerge fairly often, and the departure of groups of field elements sometimes generates structures resembling moving ribbons. The velocities of magnetic elements that have separated from spines are a factor of two to three lower than those of elements that have separated from inter-spine filaments. The results obtained agree well with an "uncombed" model for the penumbral magnetic fields.

Trace Element Mapping of a Biological Specimen by a Full-Field X-ray Fluorescence Imaging Microscope with a Wolter Mirror

NASA Astrophysics Data System (ADS)

Hoshino, Masato; Yamada, Norimitsu; Ishino, Toyoaki; Namiki, Takashi; Watanabe, Norio; Aoki, Sadao

2007-01-01

A full-field X-ray fluorescence imaging microscope with a Wolter mirror was applied to the element mapping of alfalfa seeds. The X-ray fluorescence microscope was built at the Photon Factory BL3C2 (KEK). X-ray fluorescence images of several growing stages of the alfalfa seeds were obtained. X-ray fluorescence energy spectra were measured with either a solid state detector or a CCD photon counting method. The element distributions of iron and zinc which were included in the seeds were obtained using a photon counting method.

Polarization transfer NMR imaging

DOEpatents

Sillerud, Laurel O.; van Hulsteyn, David B.

1990-01-01

A nuclear magnetic resonance (NMR) image is obtained with spatial information modulated by chemical information. The modulation is obtained through polarization transfer from a first element representing the desired chemical, or functional, information, which is covalently bonded and spin-spin coupled with a second element effective to provide the imaging data. First and second rf pulses are provided at first and second frequencies for exciting the imaging and functional elements, with imaging gradients applied therebetween to spatially separate the nuclei response for imaging. The second rf pulse is applied at a time after the first pulse which is the inverse of the spin coupling constant to select the transfer element nuclei which are spin coupled to the functional element nuclei for imaging. In a particular application, compounds such as glucose, lactate, or lactose, can be labeled with .sup.13 C and metabolic processes involving the compounds can be imaged with the sensitivity of .sup.1 H and the selectivity of .sup.13 C.

Elemental analysis of scorpion venoms.

PubMed

Al-Asmari, AbdulRahman K; Kunnathodi, Faisal; Al Saadon, Khalid; Idris, Mohammed M

2016-01-01

Scorpion venom is a rich source of biomolecules, which can perturb physiological activity of the host on envenomation and may also have a therapeutic potential. Scorpion venoms produced by the columnar cells of venom gland are complex mixture of mucopolysaccharides, neurotoxic peptides and other components. This study was aimed at cataloguing the elemental composition of venoms obtained from medically important scorpions found in the Arabian peninsula. The global elemental composition of the crude venom obtained from Androctonus bicolor, Androctonus crassicauda and Leiurus quinquestriatus scorpions were estimated using ICP-MS analyzer. The study catalogued several chemical elements present in the scorpion venom using ICP-MS total quant analysis and quantitation of nine elements exclusively using appropriate standards. Fifteen chemical elements including sodium, potassium and calcium were found abundantly in the scorpion venom at PPM concentrations. Thirty six chemical elements of different mass ranges were detected in the venom at PPB level. Quantitative analysis of the venoms revealed copper to be the most abundant element in Androctonus sp. venom but at lower level in Leiurus quinquestriatus venom; whereas zinc and manganese was found at higher levels in Leiurus sp. venom but at lower level in Androctonus sp. venom. These data and the concentrations of other different elements present in the various venoms are likely to increase our understanding of the mechanisms of venom activity and their pharmacological potentials.

NASA five-ball fatigue tester: Over 20 years of research

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.; Parker, R. J.; Anderson, W. J.

1981-01-01

Studies were conducted to determine the effect on rolling-element fatigue life of contact angle, material hardness, chemistry, heat treatment and processing, lubricant type and chemistry, elastohydrodynamic film thickness, deformation and wear, vacuum, and temperature as well as Hertzian and residual stresses. Correlation was established between the results obtained using the five-ball tester and those obtained with full scale rolling-element bearings.

Uncertainty Measurement for Trace Element Analysis of Uranium and Plutonium Samples by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallimore, David L.

2012-06-13

The measurement uncertainty estimatino associated with trace element analysis of impurities in U and Pu was evaluated using the Guide to the Expression of Uncertainty Measurement (GUM). I this evalution the uncertainty sources were identified and standard uncertainties for the components were categorized as either Type A or B. The combined standard uncertainty was calculated and a coverage factor k = 2 was applied to obtain the expanded uncertainty, U. The ICP-AES and ICP-MS methods used were deveoped for the multi-element analysis of U and Pu samples. A typical analytical run consists of standards, process blanks, samples, matrix spiked samples,more » post digestion spiked samples and independent calibration verification standards. The uncertainty estimation was performed on U and Pu samples that have been analyzed previously as part of the U and Pu Sample Exchange Programs. Control chart results and data from the U and Pu metal exchange programs were combined with the GUM into a concentration dependent estimate of the expanded uncertainty. Comparison of trace element uncertainties obtained using this model was compared to those obtained for trace element results as part of the Exchange programs. This process was completed for all trace elements that were determined to be above the detection limit for the U and Pu samples.« less

The interaction of genotype and environment determines variation in the maize kernal ionome

USDA-ARS?s Scientific Manuscript database

Plants obtain soil-resident elements that support growth and metabolism via water-mediated flow due to transpiration and active transport processes. The availability of elements in the environment can interact with the genetic capacity of the organism to modulate element uptake through plastic adapt...

Rockfall exposures in Montserrat mountain

NASA Astrophysics Data System (ADS)

Fontquerni Gorchs, Sara; Vilaplana Fernández, Joan Manuel; Guinau Sellés, Marta; Jesús Royán Cordero, Manuel

2015-04-01

This study shows the developed methodology to analyze the exposure level on a 1:25000 scale, and the results obtained by applying it to an important part of the Monataña de Montserrat Natural Park for vehicles with and without considering their occupants. The development of this proposal is part of an ongoing study which focuses more in-depth in the analysis of the rockfall risk exposure in different scales and in different natural and social contexts. This research project applies a methodology to evaluate the rockfall exposure level based on the product of the frequency of occurrence of the event by an exposure function of the vulnerable level on a 1:25,000 scale although the scale used for the study was 1:10,000. The proposed methodology to calculate the exposure level is based on six phases: 1- Identification, classification and inventory of every element potentially under risk. 2- Zoning of the frequency of occurrence of the event in the studied area. 3- Design of the exposure function for each studied element. 4- Obtaining the Exposure index, it can be defined as the product of the frequency of occurrence by the exposure function of the vulnerable element through SIG analysis obtained with ArcGis software (ESRI) 5- Obtaining exposure level by grouping into categories the numerical values of the exposure index. 6- Production of the exposition zoning map. The different types of vulnerable elements considered in the totality of the study are: Vehicles in motion, people in vehicles in motion, people on paths, permanent elements and people in buildings. Each defined typology contains all elements with same characteristics and an exposure function has been designed for each of them. For the exposure calculation, two groups of elements have been considered; firstly the group of elements with no people involved and afterwards same group of elements but with people involved. This is a first comprehensive and synthetic work about rockfall exposure on the Montserrat Mountain. It is important to mention that the exposure level calculation has been obtained from natural hazard data do not protected by defense works. Results of this work enable us to consider best strategies to reduce rockfalls risk in the PNMM. It is clear that, apart from the required structural defense works, some of them already made, implementation of strategies not involving structural defense is, in the medium and long term, the best policy to mitigate the risk. In the PNMM case, rethinking of mobility and traffic management on the mountain access would be definitely helpful to achieve a minimized geological risk.

New triangular and quadrilateral plate-bending finite elements

NASA Technical Reports Server (NTRS)

Narayanaswami, R.

1974-01-01

A nonconforming plate-bending finite element of triangular shape and associated quadrilateral elements are developed. The transverse displacement is approximated within the element by a quintic polynomial. The formulation takes into account the effects of transverse shear deformation. Results of the static and dynamic analysis of a square plate, with edges simply supported or clamped, are compared with exact solutions. Good accuracy is obtained in all calculations.

Reachable Sets for Multiple Asteroid Sample Return Missions

DTIC Science & Technology

2005-12-01

reduce the number of feasible asteroid targets. Reachable sets are defined in a reduced classical orbital element space. The boundary of this...Reachable sets are defined in a reduced classical orbital element space. The boundary of this reduced space is obtained by extremizing a family of...aliasing problems. Other coordinate elements , such as equinoctial elements , can provide a set of singularity-free slowly changing variables, but

All-electron and relativistic pseudopotential studies for the group 1 element polarizabilities from K to element 119.

PubMed

Lim, Ivan S; Schwerdtfeger, Peter; Metz, Bernhard; Stoll, Hermann

2005-03-08

Two-component and scalar relativistic energy-consistent pseudopotentials for the group 1 elements from K to element 119 are presented using nine electrons for the valence space definition. The accuracy of such an approximation is discussed for dipole polarizabilities and ionization potentials obtained at the coupled-cluster level as compared to experimental and all-electron Douglas-Kroll results.

NETWORK SYNTHESIS OF CASCADED THRESHOLD ELEMENTS.

DTIC Science & Technology

A threshold function is a switching function which can be stimulated by a single, simplified, idealized neuron, or threshold element. In this report... threshold functions are examined in the context of abstract set theory and linear algebra for the purpose of obtaining practical synthesis procedures...for networks of threshold elements. A procedure is described by which, for any given switching function, a cascade network of these elements can be

High frequency of methicillin-susceptible and methicillin-resistant Staphylococcus aureus in children under 1 year old with skin and soft tissue infections.

PubMed

Salazar-Ospina, Lorena; Jiménez, Judy Natalia

2017-09-21

Staphylococcus aureus is responsible for a large number of infections in pediatric population; however, information about the behavior of such infections in this population is limited. The aim of the study was to describe the clinical, epidemiological, and molecular characteristics of infections caused by methicillin-susceptible and resistant S. aureus (MSSA-MRSA) in a pediatric population. A cross-sectional descriptive study in patients from birth to 14 years of age from three high-complexity institutions was conducted (2008-2010). All patients infected with methicillin-resistant S. aureus and a representative sample of patients infected with methicillin-susceptible S. aureus were included. Clinical and epidemiological information was obtained from medical records and molecular characterization included spa typing, pulsed-field gel electrophoresis (PFGE), and multilocus sequence typing (MLST). In addition, staphylococcal cassette chromosome mec (SCCmec) and virulence factor genes were detected. A total of 182 patients, 65 with methicillin-susceptible S. aureus infections and 117 with methicillin-resistant S. aureus infections, were included in the study; 41.4% of the patients being under 1 year. The most frequent infections were of the skin and soft tissues. Backgrounds such as having stayed in day care centers and previous use of antibiotics were more common in patients with methicillin-resistant S. aureus infections (p≤0.05). Sixteen clonal complexes were identified and methicillin-susceptible S. aureus strains were more diverse. The most common cassette was staphylococcal cassette chromosomemec IVc (70.8%), which was linked to Panton-Valentine leukocidin (pvl). In contrast with other locations, a prevalence of infections in children under 1 year of age in the city could be observed; this emphasizes the importance of epidemiological knowledge at the local level. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

'Prevalence and antimicrobial susceptibility of Listeria monocytogenes and methicillin-resistant Staphylococcus aureus strains from raw meat and meat products in Zaria, Nigeria.

PubMed

Ndahi, M D; Kwaga, J K P; Bello, M; Kabir, J; Umoh, V J; Yakubu, S E; Nok, A J

2014-03-01

The bacterial genera Listeria and Staphylococcus have been frequently isolated from food products and are responsible for a number of animal and human diseases. The aim of the study was to simultaneously isolate and characterize L. monocytogenes and Staphylococcus species from 300 samples of raw meat and meat products, to determine the susceptibility of the organisms to commonly used antimicrobial agents and to determine the presence of haemolysin A (hyl) virulence gene in L. monocytogenes and staphylococcal cassette chromosome mecA (SCCmec) gene in the Staph. aureus isolates using PCR. Of the 85 Listeria isolates tested, 12 L. monocytogenes were identified and tested for their sensitivity to 14 antimicrobial agents. All the 12 isolates (100%) were resistant to nine antimicrobial agents, but however sensitive to gentamicin. Only one isolate was found to harbour the hylA gene. Twenty-nine isolates were confirmed as Staph. aureus by the Microbact 12S identification system and were all presumptively identified as methicillin-resistant Staph. aureus species using oxacillin-resistant Staph. aureus basal medium (ORSAB). The 29 Staph. aureus isolates were tested for their sensitivity to 16 antimicrobial agents, and 11 were resistant to methicillin. None of the 11 Staph. aureus isolates harboured the methicillin resistance, mecA gene. Listeria monocytogenes and Staphylococcus aureus are important agents of foodborne diseases. Occurrence of these infectious agents was established in meat and meat products in Zaria, Nigeria. Majority of isolates obtained from this study, displayed multidrug resistance to commonly used antimicrobial agents, including methicillin resistance among the Staph. aureus isolates. The potential virulence of L. monocytogenes found in ready-to-eat food was documented by the carriage of hly A gene by one of the isolates. A different mechanism of methicillin resistance or different homologue of mec A gene may be circulating among Nigerian isolates. © 2013 The Society for Applied Microbiology.

Molecular epidemiology of MRSA in 13 ICUs from eight European countries.

PubMed

Hetem, D J; Derde, L P G; Empel, J; Mroczkowska, A; Orczykowska-Kotyna, M; Kozińska, A; Hryniewicz, W; Goossens, H; Bonten, M J M

2016-01-01

The European epidemiology of MRSA is changing with the emergence of community-associated MRSA (CA-MRSA) and livestock-associated MRSA (LA-MRSA). In this study, we investigated the molecular epidemiology of MRSA during 2 years in 13 ICUs in France, Greece, Italy, Latvia, Luxemburg, Portugal, Slovenia and Spain. Surveillance cultures for MRSA from nose and wounds were obtained on admission and twice weekly from all patients admitted to an ICU for ≥3 days. The first MRSA isolate per patient was genotyped in a central laboratory by MLST, spa typing, agr typing and SCCmec (sub)typing. Risk factors for patients with an unknown history of MRSA colonization were identified. Overall, 14 390 ICU patients were screened, of whom 8519 stayed in an ICU for ≥3 days. Overall MRSA admission prevalence was 3.9% and ranged from 1.0% to 7.0% for individual ICUs. Overall MRSA acquisition rate was 2.5/1000 patient days at risk and ranged from 0.2 to 8/1000 patient days at risk per ICU. In total, 557 putative MRSA isolates were submitted to the central laboratory for typing, of which 511 (92%) were confirmed as MRSA. Each country had a distinct epidemiology, with ST8-IVc (UK-EMRSA-2/-6, USA500) being most prevalent, especially in France and Spain, and detected in ICUs in five of eight countries. Seventeen (3%) and three (<1%) isolates were categorized as CA-MRSA and LA-MRSA, respectively. Risk factors for MRSA carriage on ICU admission were age >70 years and hospitalization within 1 year prior to ICU admission. The molecular epidemiology of MRSA in 13 European ICUs in eight countries was homogeneous within, but heterogeneous between, countries. CA-MRSA and LA-MRSA genotypes and Panton-Valentine leucocidin-producing isolates were detected sporadically. © The Author 2015. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Determination of major elements by wavelength-dispersive X-ray fluorescence spectrometry and trace elements by inductively coupled plasma mass spectrometry in igneous rocks from the same fused sample (110 mg)

NASA Astrophysics Data System (ADS)

Amosova, Alena A.; Panteeva, Svetlana V.; Chubarov, Victor M.; Finkelshtein, Alexandr L.

2016-08-01

The fusion technique is proposed for simultaneous determination of 35 elements from the same sample. Only 110 mg of rock sample was used to obtain fused glasses for quantitative determination of 10 major elements by wavelength dispersive X-ray fluorescence analysis, 16 rare earth elements and some other trace elements by inductively coupled plasma mass spectrometry analysis. Fusion was performed with 1.1 g of lithium metaborate and LiBr solution as the releasing agent in platinum crucible in electric furnace at 1100 °C. The certified reference materials of ultramafic, mafic, intermediate and felsic igneous rocks have been applied to obtain the calibration curves for rock-forming oxides (Na2O, MgO, Al2O3, SiO2, P2O5, K2O, CaO, TiO2, MnO, Fe2O3) and some trace elements (Ba, Sr, Zr) determination by X-ray fluorescence analysis. The repeatability does not exceed the allowable standard deviation for a wide range of concentrations. In the most cases the relative standard deviation was less than 5%. Obtained glasses were utilized for the further determination of rare earth (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) and some other (Ba, Sr, Zr, Rb, Cs, Y, Nb, Hf, Ta, Th and U) trace elements by inductively coupled plasma mass spectrometry analysis with the same certified reference materials employed. The results could mostly be accepted as satisfactory. The proposed procedure essentially reduces the expenses in comparison with separate sample preparation for inductively coupled plasma mass spectrometry and X-ray fluorescence analysis.

Analysis of Composite Skin-Stiffener Debond Specimens Using a Shell/3D Modeling Technique and Submodeling

NASA Technical Reports Server (NTRS)

OBrien, T. Kevin (Technical Monitor); Krueger, Ronald; Minguet, Pierre J.

2004-01-01

The application of a shell/3D modeling technique for the simulation of skin/stringer debond in a specimen subjected to tension and three-point bending was studied. The global structure was modeled with shell elements. A local three-dimensional model, extending to about three specimen thicknesses on either side of the delamination front was used to model the details of the damaged section. Computed total strain energy release rates and mixed-mode ratios obtained from shell/3D simulations were in good agreement with results obtained from full solid models. The good correlation of the results demonstrated the effectiveness of the shell/3D modeling technique for the investigation of skin/stiffener separation due to delamination in the adherents. In addition, the application of the submodeling technique for the simulation of skin/stringer debond was also studied. Global models made of shell elements and solid elements were studied. Solid elements were used for local submodels, which extended between three and six specimen thicknesses on either side of the delamination front to model the details of the damaged section. Computed total strain energy release rates and mixed-mode ratios obtained from the simulations using the submodeling technique were not in agreement with results obtained from full solid models.

QACD: A method for the quantitative assessment of compositional distribution in geologic materials

NASA Astrophysics Data System (ADS)

Loocke, M. P.; Lissenberg, J. C. J.; MacLeod, C. J.

2017-12-01

In order to fully understand the petrogenetic history of a rock, it is critical to obtain a thorough characterization of the chemical and textural relationships of its mineral constituents. Element mapping combines the microanalytical techniques that allow for the analysis of major- and minor elements at high spatial resolutions (e.g., electron microbeam analysis) with 2D mapping of samples in order to provide unprecedented detail regarding the growth histories and compositional distributions of minerals within a sample. We present a method for the acquisition and processing of large area X-ray element maps obtained by energy-dispersive X-ray spectrometer (EDS) to produce a quantitative assessment of compositional distribution (QACD) of mineral populations within geologic materials. By optimizing the conditions at which the EDS X-ray element maps are acquired, we are able to obtain full thin section quantitative element maps for most major elements in relatively short amounts of time. Such maps can be used to not only accurately identify all phases and calculate mineral modes for a sample (e.g., a petrographic thin section), but, critically, enable a complete quantitative assessment of their compositions. The QACD method has been incorporated into a python-based, easy-to-use graphical user interface (GUI) called Quack. The Quack software facilitates the generation of mineral modes, element and molar ratio maps and the quantification of full-sample compositional distributions. The open-source nature of the Quack software provides a versatile platform which can be easily adapted and modified to suit the needs of the user.

Groups of homeomorphisms of the line. Criteria for the existence of invariant and projectively invariant measures in terms of the commutator subgroup

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beklaryan, L A

2014-12-31

Existence criteria for invariant and projectively invariant measures are obtained for a group G of homeomorphisms of the line. These criteria are formulated in terms of the commutator subgroup [G,G]. For the special (but very important) case of groups of homeomorphisms of the line containing a freely acting element we obtain a criterion for the existence of a projectively invariant measure in the form of the absence of a special subgroup with two generators in which one of the generating elements is a freely acting element. Bibliography: 20 titles.

Scaled boundary finite element simulation and modeling of the mechanical behavior of cracked nanographene sheets

NASA Astrophysics Data System (ADS)

Honarmand, M.; Moradi, M.

2018-06-01

In this paper, by using scaled boundary finite element method (SBFM), a perfect nanographene sheet or cracked ones were simulated for the first time. In this analysis, the atomic carbon bonds were modeled by simple bar elements with circular cross-sections. Despite of molecular dynamics (MD), the results obtained from SBFM analysis are quite acceptable for zero degree cracks. For all angles except zero, Griffith criterion can be applied for the relation between critical stress and crack length. Finally, despite the simplifications used in nanographene analysis, obtained results can simulate the mechanical behavior with high accuracy compared with experimental and MD ones.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Briceno, Raul A.; Hansen, Maxwell T.; Monahan, Christopher J.

Lattice quantum chromodynamics (QCD) provides the only known systematic, nonperturbative method for first-principles calculations of nucleon structure. However, for quantities such as light-front parton distribution functions (PDFs) and generalized parton distributions (GPDs), the restriction to Euclidean time prevents direct calculation of the desired observable. Recently, progress has been made in relating these quantities to matrix elements of spatially nonlocal, zero-time operators, referred to as quasidistributions. Still, even for these time-independent matrix elements, potential subtleties have been identified in the role of the Euclidean signature. In this work, we investigate the analytic behavior of spatially nonlocal correlation functions and demonstrate thatmore » the matrix elements obtained from Euclidean lattice QCD are identical to those obtained using the Lehmann-Symanzik-Zimmermann reduction formula in Minkowski space. After arguing the equivalence on general grounds, we also show that it holds in a perturbative calculation, where special care is needed to identify the lattice prediction. Lastly, we present a proof of the uniqueness of the matrix elements obtained from Minkowski and Euclidean correlation functions to all order in perturbation theory.« less

Influence of adding strong-carbide-formation elements multiply on particle-reinforced Fe-matrix composite layer produced by laser cladding

NASA Astrophysics Data System (ADS)

Ma, Mingxing; Liu, Wenjin; Zhong, Minlin; Zhang, Hongjun; Zhang, Weiming

2005-01-01

In the research hotspot of particle reinforced metal-matrix composite layer produced by laser cladding, in-situ reinforced particles obtained by adding strong-carbide-formation elements into cladding power have been attracting more attention for their unique advantage. The research has demonstrated that when adding strong-carbide-formation elements-Ti into the cladding powder of the Fe-C-Si-B separately, by optimizing the composition, better cladding coating with the characters of better strength and toughness, higher wear resistance and free of cracks. When the microstructure of cladding coating is hypoeutectic microstructure, its comprehensive performance is best. The research discovered that, compositely adding the strong-carbide-formation elements like Ti+V, Ti+Zr or V+Zr into the cladding coating is able to improve its comprehensive capability. All the cladding coatings obtained are hypoeutectic microstructure. The cladding coatings have a great deal of particulates, and its average microhardness reaches HV0.2700-1400. The research also discovered that the cladding coating obtained is of less cracking after adding the Ti+Zr.

Error analysis of finite element method for Poisson–Nernst–Planck equations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Yuzhou; Sun, Pengtao; Zheng, Bin

A priori error estimates of finite element method for time-dependent Poisson-Nernst-Planck equations are studied in this work. We obtain the optimal error estimates in L∞(H1) and L2(H1) norms, and suboptimal error estimates in L∞(L2) norm, with linear element, and optimal error estimates in L∞(L2) norm with quadratic or higher-order element, for both semi- and fully discrete finite element approximations. Numerical experiments are also given to validate the theoretical results.

Complementary use of ion beam elastic backscattering and recoil detection analysis for the precise determination of the composition of thin films made of light elements

NASA Astrophysics Data System (ADS)

Climent-Font, A.; Cervera, M.; Hernández, M. J.; Muñoz-Martín, A.; Piqueras, J.

2008-04-01

Rutherford backscattering spectrometry (RBS) is a well known powerful technique to obtain depth profiles of the constituent elements in a thin film deposited on a substrate made of lighter elements. In its standard use the probing beam is typically 2 MeV He. Its capabilities to obtain precise composition profiles are severely diminished when the overlaying film is made of elements lighter than the substrate. In this situation the analysis of the energy of the recoiled element from the sample in the elastic scattering event, the ERDA technique may be advantageous. For the detection of light elements it is also possible to use beams at specific energies producing elastic resonances with these light elements to be analyzed, with a much higher scattering cross sections than the Rutherford values. This technique may be called non-RBS. In this work we report on the complementary use of ERDA with a 30 MeV Cl beam and non-RBS with 1756 keV H ions to characterize thin films made of boron, carbon and nitrogen (BCN) deposited on Si substrates.

Investigation of the Influence of Selected Soil and Plant Properties from Sakarya, Turkey, on the Bioavailability of Trace Elements by Applying an In Vitro Digestion Model.

PubMed

Altundag, Huseyin; Albayrak, Sinem; Dundar, Mustafa S; Tuzen, Mustafa; Soylak, Mustafa

2015-11-01

The main aim of this study was an investigation of the influence of selected soil and plant properties on the bioaccessibility of trace elements and hence their potential impacts on human health in urban environments. Two artificial digestion models were used to determine trace element levels passing from soil and plants to man for bioavailability study. Soil and plant samples were collected from various regions of the province of Sakarya, Turkey. Digestive process is started by addition of soil and plant samples to an artificial digestion model based on human physiology. Bioavailability % values are obtained from the ratio of the amount of element passing to human digestion to element content of soil and plants. According to bioavailability % results, element levels passing from soil samples to human digestion were B = Cr = Cu = Fe = Pb = Li < Al < Ni < Co < Ba < Mn < Sr < Cd < Na < Zn < Tl, while element levels passing from plant samples to human digestion were Cu = Fe = Ni = Pb = Tl = Na = Li < Co < Al < Sr < Ba < Mn < Cd < Cr < Zn < B. It was checked whether the results obtained reached harmful levels to human health by examining the literature.

Green and Fast Laser Fusion Technique for Bulk Silicate Rock Analysis by Laser Ablation-Inductively Coupled Plasma Mass Spectrometry.

PubMed

Zhang, Chenxi; Hu, Zhaochu; Zhang, Wen; Liu, Yongsheng; Zong, Keqing; Li, Ming; Chen, Haihong; Hu, Shenghong

2016-10-18

Sample preparation of whole-rock powders is the major limitation for their accurate and precise elemental analysis by laser ablation inductively-coupled plasma mass spectrometry (ICPMS). In this study, a green, efficient, and simplified fusion technique using a high energy infrared laser was developed for major and trace elemental analysis. Fusion takes only tens of milliseconds for each sample. Compared to the pressed pellet sample preparation, the analytical precision of the developed laser fusion technique is higher by an order of magnitude for most elements in granodiorite GSP-2. Analytical results obtained for five USGS reference materials (ranging from mafic to intermediate to felsic) using the laser fusion technique generally agree with recommended values with discrepancies of less than 10% for most elements. However, high losses (20-70%) of highly volatile elements (Zn and Pb) and the transition metal Cu are observed. The achieved precision is within 5% for major elements and within 15% for most trace elements. Direct laser fusion of rock powders is a green and notably simple method to obtain homogeneous samples, which will significantly accelerate the application of laser ablation ICPMS for whole-rock sample analysis.

Nonlinear dynamic modeling of surface defects in rolling element bearing systems

NASA Astrophysics Data System (ADS)

Rafsanjani, Ahmad; Abbasion, Saeed; Farshidianfar, Anoushiravan; Moeenfard, Hamid

2009-01-01

In this paper an analytical model is proposed to study the nonlinear dynamic behavior of rolling element bearing systems including surface defects. Various surface defects due to local imperfections on raceways and rolling elements are introduced to the proposed model. The contact force of each rolling element described according to nonlinear Hertzian contact deformation and the effect of internal radial clearance has been taken into account. Mathematical expressions were derived for inner race, outer race and rolling element local defects. To overcome the strong nonlinearity of the governing equations of motion, a modified Newmark time integration technique was used to solve the equations of motion numerically. The results were obtained in the form of time series, frequency responses and phase trajectories. The validity of the proposed model verified by comparison of frequency components of the system response with those obtained from experiments. The classical Floquet theory has been applied to the proposed model to investigate the linear stability of the defective bearing rotor systems as the parameters of the system changes. The peak-to-peak frequency response of the system for each case is obtained and the basic routes to periodic, quasi-periodic and chaotic motions for different internal radial clearances are determined. The current study provides a powerful tool for design and health monitoring of machine systems.

Towards the stabilization of the low density elements in topology optimization with large deformation

NASA Astrophysics Data System (ADS)

Lahuerta, Ricardo Doll; Simões, Eduardo T.; Campello, Eduardo M. B.; Pimenta, Paulo M.; Silva, Emilio C. N.

2013-10-01

This work addresses the treatment of lower density regions of structures undergoing large deformations during the design process by the topology optimization method (TOM) based on the finite element method. During the design process the nonlinear elastic behavior of the structure is based on exact kinematics. The material model applied in the TOM is based on the solid isotropic microstructure with penalization approach. No void elements are deleted and all internal forces of the nodes surrounding the void elements are considered during the nonlinear equilibrium solution. The distribution of design variables is solved through the method of moving asymptotes, in which the sensitivity of the objective function is obtained directly. In addition, a continuation function and a nonlinear projection function are invoked to obtain a checkerboard free and mesh independent design. 2D examples with both plane strain and plane stress conditions hypothesis are presented and compared. The problem of instability is overcome by adopting a polyconvex constitutive model in conjunction with a suggested relaxation function to stabilize the excessive distorted elements. The exact tangent stiffness matrix is used. The optimal topology results are compared to the results obtained by using the classical Saint Venant-Kirchhoff constitutive law, and strong differences are found.

Representation of the Coulomb Matrix Elements by Means of Appell Hypergeometric Function F 2

NASA Astrophysics Data System (ADS)

Bentalha, Zine el abidine

2018-06-01

Exact analytical representation for the Coulomb matrix elements by means of Appell's double series F 2 is derived. The finite sum obtained for the Appell function F 2 allows us to evaluate explicitly the matrix elements of the two-body Coulomb interaction in the lowest Landau level. An application requiring the matrix elements of Coulomb potential in quantum Hall effect regime is presented.

Refinement of Out of Circularity and Thickness Measurements of a Cylinder for Finite Element Analysis

DTIC Science & Technology

2016-09-01

UNCLASSIFIED UNCLASSIFIED Refinement of Out of Circularity and Thickness Measurements of a Cylinder for Finite Element Analysis...significant effect on the collapse strength and must be accurately represented in finite element analysis to obtain accurate results. Often it is necessary...to interpolate measurements from a relatively coarse grid to a refined finite element model and methods that have wide general acceptance are

Advanced solid elements for sheet metal forming simulation

NASA Astrophysics Data System (ADS)

Mataix, Vicente; Rossi, Riccardo; Oñate, Eugenio; Flores, Fernando G.

2016-08-01

The solid-shells are an attractive kind of element for the simulation of forming processes, due to the fact that any kind of generic 3D constitutive law can be employed without any additional hypothesis. The present work consists in the improvement of a triangular prism solid-shell originally developed by Flores[2, 3]. The solid-shell can be used in the analysis of thin/thick shell, undergoing large deformations. The element is formulated in total Lagrangian formulation, and employs the neighbour (adjacent) elements to perform a local patch to enrich the displacement field. In the original formulation a modified right Cauchy-Green deformation tensor (C) is obtained; in the present work a modified deformation gradient (F) is obtained, which allows to generalise the methodology and allows to employ the Pull-Back and Push-Forwards operations. The element is based in three modifications: (a) a classical assumed strain approach for transverse shear strains (b) an assumed strain approach for the in-plane components using information from neighbour elements and (c) an averaging of the volumetric strain over the element. The objective is to use this type of elements for the simulation of shells avoiding transverse shear locking, improving the membrane behaviour of the in-plane triangle and to handle quasi-incompressible materials or materials with isochoric plastic flow.

Adaptive finite element methods for two-dimensional problems in computational fracture mechanics

NASA Technical Reports Server (NTRS)

Min, J. B.; Bass, J. M.; Spradley, L. W.

1994-01-01

Some recent results obtained using solution-adaptive finite element methods in two-dimensional problems in linear elastic fracture mechanics are presented. The focus is on the basic issue of adaptive finite element methods for validating the new methodology by computing demonstration problems and comparing the stress intensity factors to analytical results.

Determining e-Portfolio Elements in Learning Process Using Fuzzy Delphi Analysis

ERIC Educational Resources Information Center

Mohamad, Syamsul Nor Azlan; Embi, Mohamad Amin; Nordin, Norazah

2015-01-01

The present article introduces the Fuzzy Delphi method results obtained in the study on determining e-Portfolio elements in learning process for art and design context. This method bases on qualified experts that assure the validity of the collected information. In particular, the confirmation of elements is based on experts' opinion and…

What Are the 50 Cent Euro Coins Made of?

ERIC Educational Resources Information Center

Peralta, Luis; Farinha, Ana Catarina; Rego, Florbela

2008-01-01

X-ray fluorescence is a non-destructive technique that allows elemental composition analysis. In this paper we describe a prescription to obtain the elemental composition of homogeneous coins, like 50 cent Euro coins, and how to get the quantitative proportions of each element with the help of Monte Carlo simulation. Undergraduate students can…

A Novel Polygonal Finite Element Method: Virtual Node Method

NASA Astrophysics Data System (ADS)

Tang, X. H.; Zheng, C.; Zhang, J. H.

2010-05-01

Polygonal finite element method (PFEM), which can construct shape functions on polygonal elements, provides greater flexibility in mesh generation. However, the non-polynomial form of traditional PFEM, such as Wachspress method and Mean Value method, leads to inexact numerical integration. Since the integration technique for non-polynomial functions is immature. To overcome this shortcoming, a great number of integration points have to be used to obtain sufficiently exact results, which increases computational cost. In this paper, a novel polygonal finite element method is proposed and called as virtual node method (VNM). The features of present method can be list as: (1) It is a PFEM with polynomial form. Thereby, Hammer integral and Gauss integral can be naturally used to obtain exact numerical integration; (2) Shape functions of VNM satisfy all the requirements of finite element method. To test the performance of VNM, intensive numerical tests are carried out. It found that, in standard patch test, VNM can achieve significantly better results than Wachspress method and Mean Value method. Moreover, it is observed that VNM can achieve better results than triangular 3-node elements in the accuracy test.

Quality and Trace Element Profile of Tunisian Olive Oils Obtained from Plants Irrigated with Treated Wastewater

PubMed Central

Benincasa, Cinzia; Gharsallaoui, Mariem; Perri, Enzo; Briccoli Bati, Caterina; Ayadi, Mohamed; Khlif, Moncen; Gabsi, Slimane

2012-01-01

In the present work the use of treated wastewater (TWW) to irrigate olive plants was monitored. This type of water is characterized by high salinity and retains a substantial amount of trace elements, organic and metallic compounds that can be transferred into the soil and into the plants and fruits. In order to evaluate the impact of TWW on the overall quality of the oils, the time of contact of the olives with the soil has been taken into account. Multi-element data were obtained using ICP-MS. Nineteen elements (Li, B, Na, Mg, Al, K, Ca, Sc, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Mo, Ba and La) were submitted for statistical analysis. Using analysis of variance, linear discriminant analysis and principal component analysis it was possible to differentiate between oils produced from different batches of olives whose plants received different types of water. Also, the results showed that there was correlation between the elemental and mineral composition of the water used to irrigate the olive plots and the elemental and mineral composition of the oils. PMID:22654625

Metal(loid) accumulation in aquatic plants of a mining area: Potential for water quality biomonitoring and biogeochemical prospecting.

PubMed

Favas, Paulo J C; Pratas, João; Rodrigues, Nelson; D'Souza, Rohan; Varun, Mayank; Paul, Manoj S

2018-03-01

Aquatic bryophytes can accumulate extremely high levels of chemical elements because of their unique morphology and physiology which is markedly different from vascular plants. Four aquatic mosses-Fontinalis squamosa, Brachythecium rivulare, Platyhypnidium riparioides, Thamnobryum alopecurum-and a freshwater red alga Lemanea fluviatilis along with water samples from the streams of Góis mine region in Central Portugal were analyzed for 46 elements. Despite being below detection levels in the water samples, the elements Zr, V, Cr, Mo, Ru, Os, Rh, Ir, Pt, Ag, Ge and Bi were obtained in the plant samples. The moss T. alopecurum had the highest mean concentrations of 19 elements followed by B. rivulare (15 elements). Maximum accumulation of Rb, Ta and Au, however, was seen in the alga L. fluviatilis. Bioconcentration factors > 10 6 were obtained for a few metals. The investigation confirms that aquatic bryophytes can be suitable for water quality biomonitoring and biogeochemical prospecting in fresh water bodies owing to their high accumulative capacity of multi-elements from their aquatic ambient. Copyright © 2017 Elsevier Ltd. All rights reserved.

Application of finite element substructuring to composite micromechanics. M.S. Thesis - Akron Univ., May 1984

NASA Technical Reports Server (NTRS)

Caruso, J. J.

1984-01-01

Finite element substructuring is used to predict unidirectional fiber composite hygral (moisture), thermal, and mechanical properties. COSMIC NASTRAN and MSC/NASTRAN are used to perform the finite element analysis. The results obtained from the finite element model are compared with those obtained from the simplified composite micromechanics equations. A unidirectional composite structure made of boron/HM-epoxy, S-glass/IMHS-epoxy and AS/IMHS-epoxy are studied. The finite element analysis is performed using three dimensional isoparametric brick elements and two distinct models. The first model consists of a single cell (one fiber surrounded by matrix) to form a square. The second model uses the single cell and substructuring to form a nine cell square array. To compare computer time and results with the nine cell superelement model, another nine cell model is constructed using conventional mesh generation techniques. An independent computer program consisting of the simplified micromechanics equation is developed to predict the hygral, thermal, and mechanical properties for this comparison. The results indicate that advanced techniques can be used advantageously for fiber composite micromechanics.

Triangular prismatic solid-shell element with generalised deformation description

NASA Astrophysics Data System (ADS)

Mataix, Vicente; Flores, Fernando G.; Rossi, Riccardo; Oñate, Eugenio

2018-01-01

The solid-shells are an attractive kind of element for the simulation of f orming processes, due to the fact that any kind of generic 3D constitutive law can be employed without any kind of additional modification, besides the thermomechanic problem is formulated without additional assumptions. Additionally, this type of element allows the three-dimensional description of the deformable body, thus contact on both sides of the element can be treated easily. The present work consists in the development of a triangular prism element as a solid-shell, for the analysis of thin/thick shell, undergoing large deformations. The element is formulated in total Lagrangian formulation, and employs the neighbour (adjacent) elements to perform a local patch to enrich the displacement field. In the original formulation by Flores, a modified right Cauchy-Green deformation tensor (?) is obtained; in the present work a modified deformation gradient (?) is obtained, which allows to generalise the methodology and allows to employ a wide range of constitutive laws. The element is based in three modifications: (a) a classical assumed strain approach for transverse shear strains (b) an assumed strain approach for the in-plane components using information from neighbour elements and (c) an averaging of the volumetric strain over the element. The objective is to use this type of elements for the simulation of shells avoiding transverse shear locking, improving the membrane behaviour of the in-plane triangle and to handle quasi-incompressible materials or materials with isochoric plastic flow. Some examples have been evaluated to show the good performance of the element and results.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, William H., E-mail: millerwh@berkeley.edu; Cotton, Stephen J., E-mail: StephenJCotton47@gmail.com

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory—e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer values of themore » action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states—and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, William H.; Cotton, Stephen J.

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory - e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer valuesmore » of the action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states - and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.« less

Direct tests of micro channel plates as the active element of a new shower maximum detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronzhin, A.; Los, S.; Ramberg, E.

2015-05-22

We continue the study of micro channel plates (MCP) as the active element of a shower maximum (SM) detector. We present below test beam results obtained with MCPs detecting directly secondary particles of an electromagnetic shower. The MCP efficiency to shower particles is close to 100%. Furthermore, the time resolution obtained for this new type of the SM detector is at the level of 40 ps.

Homogenization of periodic bi-isotropic composite materials

NASA Astrophysics Data System (ADS)

Ouchetto, Ouail; Essakhi, Brahim

2018-07-01

In this paper, we present a new method for homogenizing the bi-periodic materials with bi-isotropic components phases. The presented method is a numerical method based on the finite element method to compute the local electromagnetic properties. The homogenized constitutive parameters are expressed as a function of the macroscopic electromagnetic properties which are obtained from the local properties. The obtained results are compared to Unfolding Finite Element Method and Maxwell-Garnett formulas.

Finite element solution of optimal control problems with inequality constraints

NASA Technical Reports Server (NTRS)

Bless, Robert R.; Hodges, Dewey H.

1990-01-01

A finite-element method based on a weak Hamiltonian form of the necessary conditions is summarized for optimal control problems. Very crude shape functions (so simple that element numerical quadrature is not necessary) can be used to develop an efficient procedure for obtaining candidate solutions (i.e., those which satisfy all the necessary conditions) even for highly nonlinear problems. An extension of the formulation allowing for discontinuities in the states and derivatives of the states is given. A theory that includes control inequality constraints is fully developed. An advanced launch vehicle (ALV) model is presented. The model involves staging and control constraints, thus demonstrating the full power of the weak formulation to date. Numerical results are presented along with total elapsed computer time required to obtain the results. The speed and accuracy in obtaining the results make this method a strong candidate for a real-time guidance algorithm.

Design of an ultrasonic micro-array for near field sensing during retinal microsurgery.

PubMed

Clarke, Clyde; Etienne-Cummings, Ralph

2006-01-01

A method for obtaining the optimal and specific sensor parameters for a tool-tip mountable ultrasonic transducer micro-array is presented. The ultrasonic transducer array sensor parameters, such as frequency of operation, element size, inter-element spacing, number of elements and transducer geometry are obtained using a quadratic programming method to obtain a maximum directivity while being constrained to a total array size of 4 mm2 and the required resolution for retinal imaging. The technique is used to design a uniformly spaced NxN transducer array that is capable of resolving structures in the retina that are as small as 2 microm from a distance of 100 microm. The resultant 37x37 array of 16 microm transducers with 26 microm spacing will be realized as a Capacitive Micromachined Ultrasonic Transducer (CMUT) array and used for imaging and robotic guidance during retinal microsurgery.

Dynamics of a 4x6-Meter Thin Film Elliptical Inflated Membrane for Space Applications

NASA Technical Reports Server (NTRS)

Casiano, Matthew J.; Hamidzadeh, Hamid R.; Tinker, Michael L.; McConnaughey, Paul R. (Technical Monitor)

2002-01-01

Dynamic characterization of a thin film inflatable elliptical structure is described in detail. A two-step finite element modeling approach in MSC/NASTRAN is utilized, consisting of (1) a nonlinear static pressurization procedure used to obtain the updated stiffness matrix, and (2) a modal "restart" eigen solution that uses the modified stiffness matrix. Unique problems encountered in modeling of this large Hexameter lightweight inflatable arc identified, including considerable difficulty in obtaining convergence in the nonlinear finite element pressurization solution. It was found that the extremely thin polyimide film material (.001 in or 1 mil) presents tremendous problems in obtaining a converged solution when internal pressure loading is applied. Approaches utilized to overcome these difficulties are described. Comparison of finite element predictions for frequency and mode shapes of the inflated structure with closed-form solutions for a flat pre-tensioned membrane indicate reasonable agreement.

Total elemental composition of soils contaminated with wastewater irrigation by combining IBA techniques

NASA Astrophysics Data System (ADS)

Huerta, L.; Contreras-Valadez, R.; Palacios-Mayorga, S.; Miranda, J.; Calva-Vasquez, G.

2002-04-01

The purpose of this work was to obtain the total elemental composition of agricultural soils irrigated with well water and wastewater. The studied area is located in the Valle del Mezquital in Hidalgo State, Mexico. The studied soils were collected, every two months during one year. Particle induced X-ray emission (PIXE), Rutherford backscattering spectrometry (RBS) and nuclear reaction analysis (NRA) were applied for elemental analysis. PIXE analyses gave elemental contents of major and trace elements (Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Rb, Sr, Y, Zr, and Pb). Total concentrations of Na, Mg, C, N and O were obtained by RBS and NRA. PIXE analyses were carried out with 2 MeV proton beams, RBS with 2 MeV helium ions, while NRA was applied with a 1.2 MeV deuterium beam. Results indicated that heavy metal total concentrations exceed the critical soil total concentrations according to environmental regulations.

Modeling of Structural-Acoustic Interaction Using Coupled FE/BE Method and Control of Interior Acoustic Pressure Using Piezoelectric Actuators

NASA Technical Reports Server (NTRS)

Mei, Chuh; Shi, Yacheng

1997-01-01

A coupled finite element (FE) and boundary element (BE) approach is presented to model full coupled structural/acoustic/piezoelectric systems. The dual reciprocity boundary element method is used so that the natural frequencies and mode shapes of the coupled system can be obtained, and to extend this approach to time dependent problems. The boundary element method is applied to interior acoustic domains, and the results are very accurate when compared with limited exact solutions. Structural-acoustic problems are then analyzed with the coupled finite element/boundary element method, where the finite element method models the structural domain and the boundary element method models the acoustic domain. Results for a system consisting of an isotropic panel and a cubic cavity are in good agreement with exact solutions and experiment data. The response of a composite panel backed cavity is then obtained. The results show that the mass and stiffness of piezoelectric layers have to be considered. The coupled finite element and boundary element equations are transformed into modal coordinates, which is more convenient for transient excitation. Several transient problems are solved based on this formulation. Two control designs, a linear quadratic regulator (LQR) and a feedforward controller, are applied to reduce the acoustic pressure inside the cavity based on the equations in modal coordinates. The results indicate that both controllers can reduce the interior acoustic pressure and the plate deflection.

The applications of a commercial gas/liquid separator coupled with an inductively coupled plasma mass spectrometer

PubMed Central

Hitchen, Peter; Hutton, Robert; Tye, Christopher

1992-01-01

A commercially available hydride generator, with a novel membrane gas-liquid separator, has been coupled to a new ICPMS instrument which itself features many unique design considerations. Little or no optimization of the mass spectrometer or ionization source was required to obtain excellent analytical data; and a variety of matrices have been analysed. The elements As and Se are usually used to demonstrate the effectiveness of a hydride generation system, and these are of particular importance, bearing in mind potential Ar molecular overlaps with isotopes of interest. The flexibility of the hydride generation ICP-MS system is highlighted, with the inclusion of analytical figures of merit for the elements Sn, Sb, Ge and Hg, as well as As and Se. Data obtained by ‘standard’ pneumatic nebulization on the ICP-MS is compared with that obtained with the hydride generator for all of the elements. Improvements of between 50 and 100 times were gained in measurements of three sigma detection limits for all elements in the determinations, including Hg. Measurements were made on several isotopes for particular elements, and the data is included for the purposes of comparison. Stabilities of between 1 and 2.5% were obtained for 0.5 ppb solutions over 10 min measurement periods, all data is presented without using an internal standard. Finally, analytical data from seawater standards, spiked with low levels of As and Se and calibrated against aqueous standards, demonstrate excellent recoveries. This is of particular interest bearing in mind the well-documented molecular interferences from high chloride matrices on As and Se analysis. PMID:18924920

A general algorithm using finite element method for aerodynamic configurations at low speeds

NASA Technical Reports Server (NTRS)

Balasubramanian, R.

1975-01-01

A finite element algorithm for numerical simulation of two-dimensional, incompressible, viscous flows was developed. The Navier-Stokes equations are suitably modelled to facilitate direct solution for the essential flow parameters. A leap-frog time differencing and Galerkin minimization of these model equations yields the finite element algorithm. The finite elements are triangular with bicubic shape functions approximating the solution space. The finite element matrices are unsymmetrically banded to facilitate savings in storage. An unsymmetric L-U decomposition is performed on the finite element matrices to obtain the solution for the boundary value problem.

A Survey of Uncontrolled Satellite reentry and Impact Prediction

DTIC Science & Technology

1993-09-23

NORAD produces " element sets " which are mean values of the orbital elements that have been obtained by removing the periodic orbital variations in a...Final Element Set --a listing of the final orbit parameters. The eccentricity and mean motion data from the listing were used in the investigation...yielded altitude and orbital elements as a function of time. Computer run results for these simulations were extremely long and therefore the decision was

Solution-adaptive finite element method in computational fracture mechanics

NASA Technical Reports Server (NTRS)

Min, J. B.; Bass, J. M.; Spradley, L. W.

1993-01-01

Some recent results obtained using solution-adaptive finite element method in linear elastic two-dimensional fracture mechanics problems are presented. The focus is on the basic issue of adaptive finite element method for validating the applications of new methodology to fracture mechanics problems by computing demonstration problems and comparing the stress intensity factors to analytical results.

Microstrip antenna arrays with parasitic elements

NASA Technical Reports Server (NTRS)

Lee, Kai-Fong

1996-01-01

This research was concerned with using parasitic elements to improve the bandwidth, gain and axial ratio characteristics of microstrip antennas and arrays. Significant improvements in these characteristics were obtained using stacked and coplanar parasitic elements. Details of the results are described in a total of 16 journal and 17 conference papers. These are listed in Section four of this report.

The negative ions of strontium and barium

NASA Astrophysics Data System (ADS)

Garwan, M. A.; Kilius, L. R.; Litherland, A. E.; Nadeau, M.-J.; Zhao, X.-L.

1990-12-01

Recent theoretical calculations have predicted a tendency toward higher electron affinities for heavier alkaline elements. Experimental evidence has been obtained for the existence of strontium and barium negative ions created from pure elements in a caesium sputter ion source. Accelerator mass spectrometric techniques were employed to resolve the above elemental negative ions from the interfering molecular species.

MODERATOR ELEMENTS FOR UNIFORM POWER NUCLEAR REACTOR

DOEpatents

Balent, R.

1963-03-12

This patent describes a method of obtaining a flatter flux and more uniform power generation across the core of a nuclear reactor. The method comprises using moderator elements having differing moderating strength. The elements have an increasing amount of the better moderating material as a function of radial and/or axial distance from the reactor core center. (AEC)

Simply scan--optical methods for elemental carbon measurement in diesel exhaust particulate.

PubMed

Forder, James A

2014-08-01

This article describes a performance assessment of three optical methods, a Magee Scientific OT21 Transmissometer, a Hach-Lange Microcolor II difference gloss meter, and a combination of an office scanner with Adobe Photoshop software. The optical methods measure filter staining as a proxy for elemental carbon in diesel exhaust particulate (DEP) exposure assessment and the suitability of each as a replacement for the existing Bosch meter optical method. Filters loaded with DEP were produced from air in a non-coal mine and the exhaust gases from a mobile crane. These were measured with each apparatus and then by combustion to obtain a reference elemental carbon value. The results from each apparatus were then plotted against both the Bosch number and reference elemental carbon values. The equations of the best fit lines for these plots were derived, and these gave functions for elemental carbon and Bosch number from the output of each new optical method. For each optical method, the range of DEP loadings which can be measured has been determined, and conversion equations for elemental carbon and Bosch number have been obtained. All three optical methods studied will effectively quantify blackness as a measure of elemental carbon. Of these the Magee Scientific OT21 transmissometer has the best performance. The Microcolor II and scanner/photoshop methods will in addition allow conversion to Bosch number which may be useful if historical Bosch data are available and functions for this are described. The scanner/photoshop method demonstrates a technique to obtain measurements of DEP exposure without the need to purchase specialized instrumentation. © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Interacting Winds in Eclipsing Symbiotic Systems - The Case Study of EG Andromedae

NASA Astrophysics Data System (ADS)

Calabrò, Emanuele

2014-03-01

We report the mathematical representation of the so called eccentric eclipse model, whose numerical solutions can be used to obtain the physical parameters of a quiescent eclipsing symbiotic system. Indeed the nebular region produced by the collision of the stellar winds should be shifted to the orbital axis because of the orbital motion of the system. This mechanism is not negligible, and it led us to modify the classical concept of an eclipse. The orbital elements obtained from spectroscopy and photometry of the symbiotic EG Andromedae were used to test the eccentric eclipse model. Consistent values for the unknown orbital elements of this symbiotic were obtained. The physical parameters are in agreement with those obtained by means of other simulations for this system.

Singularity embedding method in potential flow calculations

NASA Technical Reports Server (NTRS)

Jou, W. H.; Huynh, H.

1982-01-01

The so-called H-type mesh is used in a finite-element (or finite-volume) calculation of the potential flow past an airfoil. Due to coordinate singularity at the leading edge, a special singular trial function is used for the elements neighboring the leading edge. The results using the special singular elements are compared to those using the regular elements. It is found that the unreasonable pressure distribution obtained by the latter is removed by the embedding of the singular element. Suggestions to extend the present method to transonic cases are given.

A mixed shear flexible finite element for the analysis of laminated plates

NASA Technical Reports Server (NTRS)

Putcha, N. S.; Reddy, J. N.

1984-01-01

A mixed shear flexible finite element based on the Hencky-Mindlin type shear deformation theory of laminated plates is presented and their behavior in bending is investigated. The element consists of three displacements, two rotations, and three moments as the generalized degrees of freedom per node. The numerical convergence and accuracy characteristics of the element are investigated by comparing the finite element solutions with the exact solutions. The present study shows that reduced-order integration of the stiffness coefficients due to shear is necessary to obtain accurate results for thin plates.

Artificial neural networks applied to quantitative elemental analysis of organic material using PIXE

NASA Astrophysics Data System (ADS)

Correa, R.; Chesta, M. A.; Morales, J. R.; Dinator, M. I.; Requena, I.; Vila, I.

2006-08-01

An artificial neural network (ANN) has been trained with real-sample PIXE (particle X-ray induced emission) spectra of organic substances. Following the training stage ANN was applied to a subset of similar samples thus obtaining the elemental concentrations in muscle, liver and gills of Cyprinus carpio. Concentrations obtained with the ANN method are in full agreement with results from one standard analytical procedure, showing the high potentiality of ANN in PIXE quantitative analyses.

Staphylococcus haemolyticus - an emerging threat in the twilight of the antibiotics age.

PubMed

Czekaj, Tomasz; Ciszewski, Marcin; Szewczyk, Eligia M

2015-11-01

Staphylococcus haemolyticus is one of the most frequent aetiological factors of staphylococcal infections. This species seems to lack the important virulence attributes described in other staphylococci. However, studies have shown that the presence of various enzymes, cytolysins and surface substances affects the virulence of S. haemolyticus. Nevertheless, none of them has been identified as crucial and determinative. Despite this, S. haemolyticus is, after Staphylococcus epidermidis, the second most frequently isolated coagulase-negative staphylococcus from clinical cases, notably from blood infections, including sepsis. This raises the question of what is the reason for the increasing clinical significance of S. haemolyticus? The most important factor might be the ability to acquire multiresistance against available antimicrobial agents, even glycopeptides. The unusual genome plasticity of S. haemolyticus strains manifested by a large number of insertion sequences and identified SNPs might contribute to its acquisition of antibiotic resistance. Interspecies transfer of SCCmec cassettes suggests that S. haemolyticus might also be the reservoir of resistance genes for other staphylococci, including Staphylococcus aureus. Taking into consideration the great adaptability and the ability to survive in the hospital environment, especially on medical devices, S. haemolyticus becomes a crucial factor in nosocomial infections caused by multiresistant staphylococci.

Metro system in Guangzhou as a hazardous reservoir of methicillin-resistant Staphylococci: findings from a point-prevalence molecular epidemiologic study.

PubMed

Peng, Yang; Ou, Qianting; Lin, Dongxin; Xu, Ping; Li, Ying; Ye, Xiaohua; Zhou, Junli; Yao, Zhenjiang

2015-10-29

Staphylococci are common causes of healthcare-associated and community-associated infections. However, limited data are available on the prevalence, phenotypes and molecular characteristics of Staphylococci in metro system around the world. 320 surface samples were collected from the Guangzhou metro system to isolate and characterize Staphylococci strains. Of the samples, 75.6% (242/320) were contaminated with Staphylococci. The Staphylococci isolates, especially the methicillin resistant isolates, were resistance to most of the antibiotics, with 79.8% (193/242) classified as multidrug resistant (MDR) strains. 8 strains of methicillin-resistant Staphylococcus aureus (MRSA) carried a range of staphylococcal cassette chromosome mec (SCCmec) types [I (1), II (3), III (2) and NT (2)]. Staphylococcus aureus isolates were classified into several ST types and showed possible cross transmissions of strains from various sources. All MRSA strains were positive for the qac gene, and only one methicillin-susceptible Staphylococci aureus (MSSA) strain was positive for the Panton-Valentine leukocidin (PVL) genes. This study demonstrated that environmental surfaces in the Guangzhou metro system may be a hazardous reservoir for transmission of Staphylococci to passengers. The resistance to antibiotics and disinfectants observed among isolates was also noteworthy.

Antibacterial and synergy of berberines with antibacterial agents against clinical multi-drug resistant isolates of methicillin-resistant Staphylococcus aureus (MRSA).

PubMed

Zuo, Guo-Ying; Li, Yang; Han, Jun; Wang, Gen-Chun; Zhang, Yun-Ling; Bian, Zhong-Qi

2012-08-29

Antibacterial activity of berberine (Ber) and 8-acetonyl-dihydroberberine (A-Ber) alone and combined uses with antibacterial agents ampicillin (AMP), azithromycin (AZM), cefazolin (CFZ) and levofloxacin (LEV) was studied on 10 clinical isolates of SCCmec III type methicillin-resistant Staphylococcus aureus (MRSA). Susceptibility to each agent alone was tested using a broth microdilution method and the chequerboard and time-kill tests for the combined evaluations, respectively. The alone MICs/MBCs (μg/mL) ranges were 32-128/64-256 (Ber) and 32-128/128-512 (A-Ber). Significant synergies were observed for the Ber (A-Ber)/AZM and Ber (A-Ber)/LEV combinations against 90% of the tested MRSA strains, with fractional inhibitory concentration indices (FICIs) values ranged from 0.188 to 0.500. An additivity result was also observed for the Ber/AZM combination by time-kill curves. These results demonstrated for the first time that Ber and A-Ber enhanced the in vitro inhibitory efficacy of AZM and LEV to a same extent, which had potential for further investigation in combinatory therapeutic applications of patients infected with MRSA.

Basic Operating Mode | Materials Science | NREL

Science.gov Websites

indium diselenide thin film, showing elemental maps of copper (left) and indium (right). CuInSe2 thin film. Cu and In elemental maps obtained by EDS. In its basic operating mode, scanning electron

Trace element analysis by PIXE in several biomedical fields

NASA Astrophysics Data System (ADS)

Weber, G.; Robaye, G.; Bartsch, P.; Collignon, A.; Beguin, Y.; Roelandts, I.; Delbrouck, J. M.

1984-04-01

Since 1980 in the University of Liége trace element analysis by PIXE has been developed in several directions, among these: the elemental composition of lung parenchyma, hilar lymph nodes, blood content in hematological disorders and renal insufficiency. The content in trace elements of lung tumor and surrounding tissue is measured and compared to similar content previously obtained on unselected patients of comparable ages. The normalization of the bromine deficiency observed in hemodialized patients is achieved by using a dialyzing bath doped with NaBr in order to obtain a normal bromine level of 5.7 μg/ml. The content of Cu, Zn, Br and Se in blood serum from more than 100 patients suffering from malignant hemopathy has been measured. The results are compared with a reference group. These oligoelements have also been measured sequentially for patients under intensive chemotherapy in acute myeloid leukemia.

Response of hot element flush wall gauges in oscillating laminar flow

NASA Technical Reports Server (NTRS)

Giddings, T. A.; Cook, W. J.

1986-01-01

The time dependent response characteristics of flush-mounted hot element gauges used as instruments to measure wall shear stress in unsteady periodic air flows were investigated. The study was initiated because anomalous results were obtained from the gauges in oscillating turbulent flows for the phase relation of the wall shear stress variation, indicating possible gauge response problems. Flat plate laminar oscillating turbulent flows characterized by a mean free stream velocity with a superposed sinusoidal variation were performed. Laminar rather than turbulent flows were studied, because a numerical solution for the phase angle between the free stream velocity and the wall shear stress variation that is known to be correct can be obtained. The focus is on comparing the phase angle indicated by the hot element gauges with corresponding numerical prediction for the phase angle, since agreement would indicate that the hot element gauges faithfully follow the true wall shear stress variation.

Autonomous orbital navigation using Kepler's equation

NASA Technical Reports Server (NTRS)

Boltz, F. W.

1974-01-01

A simple method of determining the six elements of elliptic satellite orbits has been developed for use aboard manned and unmanned spacecraft orbiting the earth, moon, or any planet. The system requires the use of a horizon sensor or other device for determining the local vertical, a precision clock or timing device, and Apollo-type navigation equipment including an inertial measurement unit (IMU), a digital computer, and a coupling data unit. The three elements defining the in-plane motion are obtained from simultaneous measurements of central angle traversed around the planet and elapsed flight time using a linearization of Kepler's equation about a reference orbit. It is shown how Kalman filter theory may also be used to determine the in-plane orbital elements. The three elements defining the orbit orientation are obtained from position angles in celestial coordinates derived from the IMU with the spacecraft vertically oriented after alignment of the IMU to a known inertial coordinate frame.

Connecting micro dynamics and population distributions in system dynamics models

PubMed Central

Rahmandad, Hazhir; Chen, Hsin-Jen; Xue, Hong; Wang, Youfa

2014-01-01

Researchers use system dynamics models to capture the mean behavior of groups of indistinguishable population elements (e.g., people) aggregated in stock variables. Yet, many modeling problems require capturing the heterogeneity across elements with respect to some attribute(s) (e.g., body weight). This paper presents a new method to connect the micro-level dynamics associated with elements in a population with the macro-level population distribution along an attribute of interest without the need to explicitly model every element. We apply the proposed method to model the distribution of Body Mass Index and its changes over time in a sample population of American women obtained from the U.S. National Health and Nutrition Examination Survey. Comparing the results with those obtained from an individual-based model that captures the same phenomena shows that our proposed method delivers accurate results with less computation than the individual-based model. PMID:25620842

Numerical Study of the Effect of Presence of Geometric Singularities on the Mechanical Behavior of Laminated Plates

NASA Astrophysics Data System (ADS)

Khechai, Abdelhak; Tati, Abdelouahab; Guettala, Abdelhamid

2017-05-01

In this paper, an effort is made to understand the effects of geometric singularities on the load bearing capacity and stress distribution in thin laminated plates. Composite plates with variously shaped cutouts are frequently used in both modern and classical aerospace, mechanical and civil engineering structures. Finite element investigation is undertaken to show the effect of geometric singularities on stress distribution. In this study, the stress concentration factors (SCFs) in cross-and-angle-ply laminated as well as in isotropic plates subjected to uniaxial loading are studied using a quadrilateral finite element of four nodes with thirty-two degrees-of-freedom per element. The varying parameters such as the cutout shape and hole sizes (a/b) are considered. The numerical results obtained by the present element are compared favorably with those obtained using the finite element software Freefem++ and the analytic findings published in literature, which demonstrates the accuracy of the present element. Freefem++ is open source software based on the finite element method, which could be helpful to study and improving the analyses of the stress distribution in composite plates with cutouts. The Freefem++ and the quadrilateral finite element formulations will be given in the beginning of this paper. Finally, to show the effect of the fiber orientation angle and anisotropic modulus ratio on the (SCF), number of figures are given for various ratio (a/b).

A triangular prism solid and shell interactive mapping element for electromagnetic sheet metal forming process

NASA Astrophysics Data System (ADS)

Cui, Xiangyang; Li, She; Feng, Hui; Li, Guangyao

2017-05-01

In this paper, a novel triangular prism solid and shell interactive mapping element is proposed to solve the coupled magnetic-mechanical formulation in electromagnetic sheet metal forming process. A linear six-node "Triprism" element is firstly proposed for transient eddy current analysis in electromagnetic field. In present "Triprism" element, shape functions are given explicitly, and a cell-wise gradient smoothing operation is used to obtain the gradient matrices without evaluating derivatives of shape functions. In mechanical field analysis, a shear locking free triangular shell element is employed in internal force computation, and a data mapping method is developed to transfer the Lorentz force on solid into the external forces suffered by shell structure for dynamic elasto-plasticity deformation analysis. Based on the deformed triangular shell structure, a "Triprism" element generation rule is established for updated electromagnetic analysis, which means inter-transformation of meshes between the coupled fields can be performed automatically. In addition, the dynamic moving mesh is adopted for air mesh updating based on the deformation of sheet metal. A benchmark problem is carried out for confirming the accuracy of the proposed "Triprism" element in predicting flux density in electromagnetic field. Solutions of several EMF problems obtained by present work are compared with experiment results and those of traditional method, which are showing excellent performances of present interactive mapping element.

Critical Elements in Fly Ash from the Combustion of Bituminous Coal in Major Polish Power Plants

NASA Astrophysics Data System (ADS)

Bielowicz, Barbara; Botor, Dariusz; Misiak, Jacek; Wagner, Marian

2018-03-01

The concentration of critical elements, including such REE as Fe, Co, W, Zn, Cr, Ni, V, Mn, Ti, Ag, Ga, Ta, Sr, Li, and Cu, in the so-called fly ash obtained from the 9 Polish power plants and 1 thermal power station has been determined. The obtained values, compared with the global average concentration in bituminous coal ash and sedimentary rocks (Clarke values), have shown that the enrichment of fly ash in the specified elements takes place in only a few bituminous coal processing sites in Poland. The enrichment factor (EF) is only slightly higher (the same order of magnitude) than the Clarke values. The enrichment factor in relation to the Clarke value in the Earth's crust reached values above 10 in all of the examined ashes for the following elements: Cr, Ni, V, W, and, in some ash samples, also Cu and Zn. The obtained values are low, only slightly higher than the global average concentrations in sedimentary rocks and bituminous coal ashes. The ferromagnetic grains (microspheres) found in bituminous coal fly ashes seem to be the most economically prospective in recovery of selected critical elements. The microanalysis has shown that iron cenospheres and plerospheres in fly ash contain, in addition to enamel and iron oxides (magnetite and hematite), iron spinels enriched in Co, Cr, Cu, Mn, Ni, W, and Zn.

Static analysis of rectifier cabinet for nuclear power generating stations based on finite element method

NASA Astrophysics Data System (ADS)

Yin, Qiang; Chen, Tian-jin; Li, Wei-yang; Xiong, Ze-cheng; Ma, Rui

2017-09-01

In order to obtain the deformation map and equivalent stress distribution of rectifier cabinet for nuclear power generating stations, the quality distribution of structure and electrical are described, the tensile bond strengths of the rings are checked, and the finite element model of cabinet is set up by ANSYS. The transport conditions of the hoisting state and fork loading state are analyzed. The deformation map and equivalent stress distribution are obtained. The attentive problems are put forward. It is a reference for analysis method and the obtained results for the transport of rectifier cabinet for nuclear power generating stations.

The decline of soil due to the pile of highway project Medan-Kualanamu (STA 35 + 901) with the finite element method

NASA Astrophysics Data System (ADS)

Hastuty, I. P.; Roesyanto; Sihite, A. B.

2018-02-01

Consolidation is the process of discharge of water from the ground through the pore cavity. Consolidation occurs in soft soil or unstable soil that allows an improvement in order to make the soil more stable. The method of using Prefabricated Vertical Drain (PVD) is one way to improve unstable soils. PVD works like a sand column that can drain water vertically. This study aims to determine the decrease, pore water pressure and soil consolidation rate with Prefabricated Vertical Drain (PVD) and without PVD analytically and using finite element method that affect the duration of soil decline to reach 90% consolidation or in other words soil does not decline anymore. Based on the analytical calculation, the decrease obtained is equal to 0.47 m meanwhile the result of calculation using finite element method is 0.45 m. The consolidation rate obtained from analytical calculation is 19 days with PVD and 115 days without PVD. The consolidation rate obtained from finite element method is 63 days with PVD and 110 days without PVD. And the pore water pressure is 0.92 KN/m2.

Experimental and numerical investigation of strain rate effect on low cycle fatigue behaviour of AA 5754 alloy

NASA Astrophysics Data System (ADS)

Kumar, P.; Singh, A.

2018-04-01

The present study deals with evaluation of low cycle fatigue (LCF) behavior of aluminum alloy 5754 (AA 5754) at different strain rates. This alloy has magnesium (Mg) as main alloying element (Al-Mg alloy) which makes this alloy suitable for Marines and Cryogenics applications. The testing procedure and specimen preparation are guided by ASTM E606 standard. The tests are performed at 0.5% strain amplitude with three different strain rates i.e. 0.5×10-3 sec-1, 1×10-3 sec-1 and 2×10-3 sec-1 thus the frequency of tests vary accordingly. The experimental results show that there is significant decrease in the fatigue life with the increase in strain rate. LCF behavior of AA 5754 is also simulated at different strain rates by finite element method. Chaboche kinematic hardening cyclic plasticity model is used for simulating the hardening behavior of the material. Axisymmetric finite element model is created to reduce the computational cost of the simulation. The material coefficients used for “Chaboche Model” are determined by experimentally obtained stabilized hysteresis loop. The results obtained from finite element simulation are compared with those obtained through LCF experiments.

Measurement of trace elements in tree rings using the PIXE method

NASA Astrophysics Data System (ADS)

Aoki, Toru; Katayama, Yukio; Kagawa, Akira; Koh, Susumu; Yoshida, Kohji

1998-03-01

Standard materials were prepared in order to calculate element concentrations in tree samples using the particle induced X-ray emission (PIXE) method. Five standard solutions (1) Ti, Fe, Cu, As, Rb, Sr; (2) Ca, V, Co, Zn, As, Rb; (3) Ti, Mn, Ni, As, Sr; (4) K, Mn, Co, As, Rb, Sr; and (5) Ca, Mn, Cu, As, Rb, Sr, were added to filter papers. The dried filter papers were used as standard samples. Pellets of Pepperbush leaves (National Institute for Environmental Studies (NIES)) and Peach leaves (National Institute of Standards and Technology (NIST)) were used as references. The peak counts of Ca, Mn, Cu, Zn, Rb, and Sr in samples taken from a kaki ( Diospros kaki Thunb.) were measured and the concentrations (ppm) of the elements were calculated using the yield curve obtained from the standard filter papers. The concentrations of Mn, Zn, Rb, and Ca were compared with the data obtained from a separate INAA analysis. Concentrations of Mn, Zn, and Ca obtained by both methods were almost the same, but the concentrations of Rb differed slightly. The amounts of trace elements in samples taken from a sugi ( Cryptomeria japonica D. Don) were also measured.

A high-order 3-D spectral-element method for the forward modelling and inversion of gravimetric data—Application to the western Pyrenees

NASA Astrophysics Data System (ADS)

Martin, Roland; Chevrot, Sébastien; Komatitsch, Dimitri; Seoane, Lucia; Spangenberg, Hannah; Wang, Yi; Dufréchou, Grégory; Bonvalot, Sylvain; Bruinsma, Sean

2017-04-01

We image the internal density structure of the Pyrenees by inverting gravity data using an a priori density model derived by scaling a Vp model obtained by full waveform inversion of teleseismic P-waves. Gravity anomalies are computed via a 3-D high-order finite-element integration in the same high-order spectral-element grid as the one used to solve the wave equation and thus to obtain the velocity model. The curvature of the Earth and surface topography are taken into account in order to obtain a density model as accurate as possible. The method is validated through comparisons with exact semi-analytical solutions. We show that the spectral-element method drastically accelerates the computations when compared to other more classical methods. Different scaling relations between compressional velocity and density are tested, and the Nafe-Drake relation is the one that leads to the best agreement between computed and observed gravity anomalies. Gravity data inversion is then performed and the results allow us to put more constraints on the density structure of the shallow crust and on the deep architecture of the mountain range.

Advances in three-dimensional field analysis and evaluation of performance parameters of electrical machines

NASA Astrophysics Data System (ADS)

Sivasubramaniam, Kiruba

This thesis makes advances in three dimensional finite element analysis of electrical machines and the quantification of their parameters and performance. The principal objectives of the thesis are: (1)the development of a stable and accurate method of nonlinear three-dimensional field computation and application to electrical machinery and devices; and (2)improvement in the accuracy of determination of performance parameters, particularly forces and torque computed from finite elements. Contributions are made in two general areas: a more efficient formulation for three dimensional finite element analysis which saves time and improves accuracy, and new post-processing techniques to calculate flux density values from a given finite element solution. A novel three-dimensional magnetostatic solution based on a modified scalar potential method is implemented. This method has significant advantages over the traditional total scalar, reduced scalar or vector potential methods. The new method is applied to a 3D geometry of an iron core inductor and a permanent magnet motor. The results obtained are compared with those obtained from traditional methods, in terms of accuracy and speed of computation. A technique which has been observed to improve force computation in two dimensional analysis using a local solution of Laplace's equation in the airgap of machines is investigated and a similar method is implemented in the three dimensional analysis of electromagnetic devices. A new integral formulation to improve force calculation from a smoother flux-density profile is also explored and implemented. Comparisons are made and conclusions drawn as to how much improvement is obtained and at what cost. This thesis also demonstrates the use of finite element analysis to analyze torque ripples due to rotor eccentricity in permanent magnet BLDC motors. A new method for analyzing torque harmonics based on data obtained from a time stepping finite element analysis of the machine is explored and implemented.

Crack Turning and Arrest Mechanisms for Integral Structure

NASA Technical Reports Server (NTRS)

Pettit, Richard; Ingraffea, Anthony

1999-01-01

In the course of several years of research efforts to predict crack turning and flapping in aircraft fuselage structures and other problems related to crack turning, the 2nd order maximum tangential stress theory has been identified as the theory most capable of predicting the observed test results. This theory requires knowledge of a material specific characteristic length, and also a computation of the stress intensity factors and the T-stress, or second order term in the asymptotic stress field in the vicinity of the crack tip. A characteristic length, r(sub c), is proposed for ductile materials pertaining to the onset of plastic instability, as opposed to the void spacing theories espoused by previous investigators. For the plane stress case, an approximate estimate of r(sub c), is obtained from the asymptotic field for strain hardening materials given by Hutchinson, Rice and Rosengren (HRR). A previous study using of high order finite element methods to calculate T-stresses by contour integrals resulted in extremely high accuracy values obtained for selected test specimen geometries, and a theoretical error estimation parameter was defined. In the present study, it is shown that a large portion of the error in finite element computations of both K and T are systematic, and can be corrected after the initial solution if the finite element implementation utilizes a similar crack tip discretization scheme for all problems. This scheme is applied for two-dimensional problems to a both a p-version finite element code, showing that sufficiently accurate values of both K(sub I) and T can be obtained with fairly low order elements if correction is used. T-stress correction coefficients are also developed for the singular crack tip rosette utilized in the adaptive mesh finite element code FRANC2D, and shown to reduce the error in the computed T-stress significantly. Stress intensity factor correction was not attempted for FRANC2D because it employs a highly accurate quarter-point scheme to obtain stress intensity factors.

Element sensitive reconstruction of nanostructured surfaces with finite elements and grazing incidence soft X-ray fluorescence.

PubMed

Soltwisch, Victor; Hönicke, Philipp; Kayser, Yves; Eilbracht, Janis; Probst, Jürgen; Scholze, Frank; Beckhoff, Burkhard

2018-03-29

The geometry of a Si3N4 lamellar grating was investigated experimentally with reference-free grazing-incidence X-ray fluorescence analysis. While simple layered systems are usually treated with the matrix formalism to determine the X-ray standing-wave field, this approach fails for laterally structured surfaces. Maxwell solvers based on finite elements are often used to model electrical field strengths for any 2D or 3D structures in the optical spectral range. We show that this approach can also be applied in the field of X-rays. The electrical field distribution obtained with the Maxwell solver can subsequently be used to calculate the fluorescence intensities in full analogy to the X-ray standing-wave field obtained by the matrix formalism. Only the effective 1D integration for the layer system has to be replaced by a 2D integration of the finite elements, taking into account the local excitation conditions. We will show that this approach is capable of reconstructing the geometric line shape of a structured surface with high elemental sensitivity. This combination of GIXRF and finite-element simulations paves the way for a versatile characterization of nanoscale-structured surfaces.

Analytical validation of an explicit finite element model of a rolling element bearing with a localised line spall

NASA Astrophysics Data System (ADS)

Singh, Sarabjeet; Howard, Carl Q.; Hansen, Colin H.; Köpke, Uwe G.

2018-03-01

In this paper, numerically modelled vibration response of a rolling element bearing with a localised outer raceway line spall is presented. The results were obtained from a finite element (FE) model of the defective bearing solved using an explicit dynamics FE software package, LS-DYNA. Time domain vibration signals of the bearing obtained directly from the FE modelling were processed further to estimate time-frequency and frequency domain results, such as spectrogram and power spectrum, using standard signal processing techniques pertinent to the vibration-based monitoring of rolling element bearings. A logical approach to analyses of the numerically modelled results was developed with an aim to presenting the analytical validation of the modelled results. While the time and frequency domain analyses of the results show that the FE model generates accurate bearing kinematics and defect frequencies, the time-frequency analysis highlights the simulation of distinct low- and high-frequency characteristic vibration signals associated with the unloading and reloading of the rolling elements as they move in and out of the defect, respectively. Favourable agreement of the numerical and analytical results demonstrates the validation of the results from the explicit FE modelling of the bearing.

ANALYTICAL ELEMENT MODELING OF COASTAL AQUIFERS

EPA Science Inventory

Four topics were studied concerning the modeling of groundwater flow in coastal aquifers with analytic elements: (1) practical experience was obtained by constructing a groundwater model of the shallow aquifers below the Delmarva Peninsula USA using the commercial program MVAEM; ...

Anisotropic Resistivity Forward Modelling Using Automatic Generated Higher-order Finite Element Codes

NASA Astrophysics Data System (ADS)

Wang, W.; Liu, J.

2016-12-01

Forward modelling is the general way to obtain responses of geoelectrical structures. Field investigators might find it useful for planning surveys and choosing optimal electrode configurations with respect to their targets. During the past few decades much effort has been put into the development of numerical forward codes, such as integral equation method, finite difference method and finite element method. Nowadays, most researchers prefer the finite element method (FEM) for its flexible meshing scheme, which can handle models with complex geometry. Resistivity Modelling with commercial sofewares such as ANSYS and COMSOL is convenient, but like working with a black box. Modifying the existed codes or developing new codes is somehow a long period. We present a new way to obtain resistivity forward modelling codes quickly, which is based on the commercial sofeware FEPG (Finite element Program Generator). Just with several demanding scripts, FEPG could generate FORTRAN program framework which can easily be altered to adjust our targets. By supposing the electric potential is quadratic in each element of a two-layer model, we obtain quite accurate results with errors less than 1%, while more than 5% errors could appear by linear FE codes. The anisotropic half-space model is supposed to concern vertical distributed fractures. The measured apparent resistivities along the fractures are bigger than results from its orthogonal direction, which are opposite of the true resistivities. Interpretation could be misunderstood if this anisotropic paradox is ignored. The technique we used can obtain scientific codes in a short time. The generated powerful FORTRAN codes could reach accurate results by higher-order assumption and can handle anisotropy to make better interpretations. The method we used could be expand easily to other domain where FE codes are needed.

A Global Interpolation Function (GIF) boundary element code for viscous flows

NASA Technical Reports Server (NTRS)

Reddy, D. R.; Lafe, O.; Cheng, A. H-D.

1995-01-01

Using global interpolation functions (GIF's), boundary element solutions are obtained for two- and three-dimensional viscous flows. The solution is obtained in the form of a boundary integral plus a series of global basis functions. The unknown coefficients of the GIF's are determined to ensure the satisfaction of the governing equations at selected collocation points. The values of the coefficients involved in the boundary integral equations are determined by enforcing the boundary conditions. Both primitive variable and vorticity-velocity formulations are examined.

Analysis of Piezoelectric Actuator for Vibration Control of Composite plate

NASA Astrophysics Data System (ADS)

Gomaa, Ahmed R.; Hai, Huang

2017-07-01

Vibration analysis is studied numerically in this paper for a simply supported composite plate subjected to external loadings. Vibrations are controlled by using piezoelectric patches. Finite element method (ANSYS) is used for obtaining finite element model of the smart plate structure, a layered composite plate is manufactured experimentally and tested to obtain the structure mechanical properties. Different piezoelectric patch areas and different applied gain voltage effects on vibration attenuation is studied. The numerical solution is compared with the experimental work, a good agreement achieved.

Determination of trace elements in epiphytic lichens from Bandar Baru Bangi, Selangor using INAA method

NASA Astrophysics Data System (ADS)

Khairudin, Nurshafiq Ezam; Siong, Khoo Kok; Siong, Wee Boon

2014-02-01

Lichens have been used as effective biomonitors of atmospheric pollutants as they can take up nutrients and pollutants directly from the atmosphere. In this study, trace element contents in epiphytic lichens were determined using INAA method. Samples were collected from 7 sampling locations around Bandar Baru Bangi, Selangor. The elements detected were As (1.73+0.85 mg/kg), Ce (3.65+1.91 mg/kg), Co (0.29+0.12 mg/kg), Cr (5.92+3.54 mg/kg), Cs (0.92+0.25 mg/kg), Eu (0.03+0.02 mg/kg), Fe (1280+760 mg/kg), Hf (0.37+0.18 mg/kg), La (1.52+0.89 mg/kg), Rb (27.7+4.8 mg/kg), Sc (0.33+0.19 mg/kg), Sm (0.28+0.16 mg/kg), Th (1.21+0.62 mg/kg) and Zn (116+27 mg/kg). Comparisons were then made between the elemental concentrations obtained and the baseline data from literature. Results showed that most of the elements were within the concentration range of the baseline data. Enrichment factors (EF) of the trace element in lichens showed that most of the elements were within the range of the baseline data except for As which was found to be slightly enriched (EF: 13.2 - 28.5). Regression analysis indicated significant correlation (p<0.05) with Sc for most of the elements which signifies crustal input except for Cs and Rb. The poor correlations of Cs and Rb with Sc may be due to the mobility of these elements. In summary, trace element data obtained using INAA were very useful and demonstrated that lichens were suitable biomonitors for identifying potential trace element pollutants in ambient air around the sampling area.

Membrane triangles with corner drilling freedoms. I - The EFF element

NASA Technical Reports Server (NTRS)

Alvin, Ken; De La Fuente, Horacio M.; Haugen, Bjorn; Felippa, Carlos A.

1992-01-01

The formulation of 3-node 9-DOF membrane elements with normal-to-element-plane rotations (drilling freedoms) is examined in the context of parametrized variational principles. In particular, attention is given to the application of the extended free formulation (EFF) to the construction of a triangular membrane element with drilling freedoms that initially has complete quadratic polynomial expansions in each displacement component. The main advantage of the EFF over the free formulation triangle is that an explicit form is obtained for the higher-order stiffness.

Exploring the Reduction of Fuel Consumption for Ship-to-Shore Connectors of the Marine Expeditionary Brigade

DTIC Science & Technology

2013-12-01

include the Command Element (CE), the Aviation Combat Element (ACE), the Ground Combat Element ( GCE ), and the Combat Service Support Element (CSSE) (from...35 Figure 9. The upper level functional architecture for EW12 shows the three primary functions of F1-Assemble the Seabase, F2...Function F2-Perform Assault is decomposed to obtain the lower level specific functions. From this decomposition, the sub-function of F2.2- Gain Entry

Automation Tools for Finite Element Analysis of Adhesively Bonded Joints

NASA Technical Reports Server (NTRS)

Tahmasebi, Farhad; Brodeur, Stephen J. (Technical Monitor)

2002-01-01

This article presents two new automation creation tools that obtain stresses and strains (Shear and peel) in adhesively bonded joints. For a given adhesively bonded joint Finite Element model, in which the adhesive is characterised using springs, these automation tools read the corresponding input and output files, use the spring forces and deformations to obtain the adhesive stresses and strains, sort the stresses and strains in descending order, and generate plot files for 3D visualisation of the stress and strain fields. Grids (nodes) and elements can be numbered in any order that is convenient for the user. Using the automation tools, trade-off studies, which are needed for design of adhesively bonded joints, can be performed very quickly.

Determination of trace elements in metals and alloys by atomic-absorption spectroscopy using an induction-heated graphite well furnace as atom source.

PubMed

Headridge, J B; Smith, D R

1972-07-01

An induction-heated graphite furnace, coupled to a Unicam SP 90 atomic-absorption spectrometer, is described for the direct determination of trace elements in metals and alloys. The furnace is capable of operation at temperatures up to 2400 degrees , and has been used to obtain calibration graphs for the determination of ppm quantities of bismuth in lead-base alloys, cast irons and stainless steels, and for the determination of cadmium at the ppm level in zinc-base alloys. Milligram samples of the alloys were atomized directly. Calibration graphs for the determination of the elements in solutions were obtained for comparison. The accuracy and precision of the determination are presented and discussed.

Residual life and strength estimates of aircraft structural components with MSD/MED

NASA Technical Reports Server (NTRS)

Singh, Ripudaman; Park, Jai H.; Atluri, Satya N.

1994-01-01

Economic and safe operation of the flight vehicles flying beyond their initial design life calls for an in-depth structural integrity evaluation of all components with potential for catastrophic damages. Fuselage panels with cracked skin and/or stiffening elements is one such example. A three level analytical approach is developed to analyze the pressurized fuselage stiffened shell panels with damaged skin or stiffening elements. A global finite element analysis is first carried out to obtain the load flow pattern through the damaged panel. As an intermediate step, the damaged zone is treated as a spatially three-dimensional structure modeled by plate and shell finite elements, with all the neighboring elements that can alter the stress state at the crack tip. This is followed by the Schwartz-Neumann alternating method for local analysis to obtain the relevant crack tip parameters that govern the onset of fracture and the crack growth. The methodology developed is generic in nature and aims at handling a large fraction of problem areas identified by the Industry Committee on Wide-Spread Fatigue Damage.

Trace elements: implications for nursing.

PubMed

Hayter, J

1980-01-01

Although most were unknown a few years ago, present evidence indicates that at least 25 trace elements have some pertinence to health. Unlike vitamins, they cannot be synthesized. Some trace elements are now considered important only because of their harmful effects but traces of them may be essential. Zinc is especially important during puberty, pregnancy and menopause and is related to protein metabolism. Both fluoride and cadmium accumulate in the body year after year. Cadmium is positively correlated with several chronic diseases, especially hypertension. It is obtained from smoking and drinking soft water. Silicon, generally associated with silicosis, may be necessary for healthy bone and connective tissue. Chromium, believed to be the glucose tolerance factor, is obtained from brewer's yeast, spices, and whole wheat products. Copper deficiency may be implicated in a wide range of cardiovascular and blood related disorders. Either marginal deficiencies or slight excesses of most trace elements are harmful. Nurses should instruct patients to avoid highly refined foods, fad diets, or synthetic and fabricated foods. A well balanced and varied diet is the best safeguard against trace element excesses or deficiencies.

Evaluation of the finite element software ABAQUS for biomechanical modelling of biphasic tissues.

PubMed

Wu, J Z; Herzog, W; Epstein, M

1998-02-01

The biphasic cartilage model proposed by Mow et al. (1980) has proven successful to capture the essential mechanical features of articular cartilage. In order to analyse the joint contact mechanics in real, anatomical joints, the cartilage model needs to be implemented into a suitable finite element code to approximate the irregular surface geometries of such joints. However, systematic and extensive evaluation of the capacity of commercial software for modelling the contact mechanics with biphasic cartilage layers has not been made. This research was aimed at evaluating the commercial finite element software ABAQUS for analysing biphasic soft tissues. The solutions obtained using ABAQUS were compared with those obtained using other finite element models and analytical solutions for three numerical tests: an unconfined indentation test, a test with the contact of a spherical cartilage surface with a rigid plate, and an axi-symmetric joint contact test. It was concluded that the biphasic cartilage model can be implemented into the commercial finite element software ABAQUS to analyse practical joint contact problems with biphasic articular cartilage layers.

The 'North American shale composite' - Its compilation, major and trace element characteristics

NASA Technical Reports Server (NTRS)

Gromet, L. P.; Dymek, R. F.; Haskin, L. A.; Korotev, R. L.

1984-01-01

North American shale composite (NASC) major element composition and compilation are presented, together with rare earth element (REE) redeterminations obtained by high precision analytical methods. The major element composition of the NASC compares closely with other average shale compositions, and significant portions of the REE and some other trace elements are contained in minor phases. The uneven REE distribution in NASC powder appears to yield the heterogeneity in analyzed aliquants. REE distributions of detrital sediments may to some extent be dependent on their minor mineral assemblages and the sedimentological factors controlling these assemblages.

Dynamic characterization, monitoring and control of rotating flexible beam-mass structures via piezo-embedded techniques

NASA Technical Reports Server (NTRS)

Lai, Steven H.-Y.

1992-01-01

A variational principle and a finite element discretization technique were used to derive the dynamic equations for a high speed rotating flexible beam-mass system embedded with piezo-electric materials. The dynamic equation thus obtained allows the development of finite element models which accommodate both the original structural element and the piezoelectric element. The solutions of finite element models provide system dynamics needed to design a sensing system. The characterization of gyroscopic effect and damping capacity of smart rotating devices are addressed. Several simulation examples are presented to validate the analytical solution.

Project Summary. ANALYTICAL ELEMENT MODELING OF COASTAL AQUIFERS

EPA Science Inventory

Four topics were studied concerning the modeling of groundwater flow in coastal aquifers with analytic elements: (1) practical experience was obtained by constructing a groundwater model of the shallow aquifers below the Delmarva Peninsula USA using the commercial program MVAEM; ...

Case study of rotating sonar sensor application in unmanned automated guided vehicle

NASA Astrophysics Data System (ADS)

Chandak, Pravin; Cao, Ming; Hall, Ernest L.

2001-10-01

A single rotating sonar element is used with a restricted angle of sweep to obtain readings to develop a range map for the unobstructed path of an autonomous guided vehicle (AGV). A Polaroid ultrasound transducer element is mounted on a micromotor with an encoder feedback. The motion of this motor is controlled using a Galil DMC 1000 motion control board. The encoder is interfaced with the DMC 1000 board using an intermediate IMC 1100 break-out board. By adjusting the parameters of the Polaroid element, it is possible to obtain range readings at known angles with respect to the center of the robot. The readings are mapped to obtain a range map of the unobstructed path in front of the robot. The idea can be extended to a 360 degree mapping by changing the assembly level programming on the Galil Motion control board. Such a system would be compact and reliable over a range of environments and AGV applications.

Red giants and yellow stragglers in the young open cluster NGC 2447

NASA Astrophysics Data System (ADS)

da Silveira, M. D.; Pereira, C. B.; Drake, N. A.

2018-06-01

In this work we analysed, using high-resolution spectroscopy, a sample of 12 single and 4 spectroscopic binary stars of the open cluster NGC 2447. For the single stars, we obtained atmospheric parameters and chemical abundances of Li, C, N, O, Na, Mg, Al, Ca, Si, Ti, Ni, Cr, Y, Zr, La, Ce, Nd, Eu. Rotational velocities were obtained for all the stars. The abundances of the light elements and Eu and the rotational velocities were derived using spectral synthesis technique. We obtained a mean metallicity of [Fe/H] = -0.17 ± 0.05. We found that the abundances of all elements are similar to field giants and/or giants of open clusters, even for the s-process elements, which are enhanced as in other young open clusters. We show that the spectroscopic binaries NGC 2447-26, 38, and 42 are yellow-straggler stars, of which the primary is a giant star and the secondary a main-sequence A-type star.

Failure modes of single and multi-bolted joint in the pultruded fiber reinforced polymer composite members

NASA Astrophysics Data System (ADS)

Kim, S. Y.; Yoo, J. H.; Kim, H. K.; Shin, K. Y.; Yoon, S. J.

2018-06-01

In this paper, we discussed the structural behavior of bolted lap-joint connections in pultruded FRP structural members. Especially, bolted connections in pultruded FRP members are investigated for their failure modes and strength. Specimens with single and multiple bolt-holes are tested in tension under bolt-loading conditions. All of the specimens are instrumented with strain gages and the load-strain responses are monitored. The failed specimens are examined for the cracks and failure patterns. The purpose of this paper is to predict the failure strength by using the ratio of the results obtained by the experiment and the finite element analysis. In the study, several tests are conducted to determine the mechanical properties of pultruded FRP materials before the main experiment. The results are used in the finite element analysis for single and multiple bolted lap-joint specimens. The results obtained by the experiment are compared with the results obtained by the finite element analysis.

Water impact analysis of space shuttle solid rocket motor by the finite element method

NASA Technical Reports Server (NTRS)

Buyukozturk, O.; Hibbitt, H. D.; Sorensen, E. P.

1974-01-01

Preliminary analysis showed that the doubly curved triangular shell elements were too stiff for these shell structures. The doubly curved quadrilateral shell elements were found to give much improved results. A total of six load cases were analyzed in this study. The load cases were either those resulting from a static test using reaction straps to simulate the drop conditions or under assumed hydrodynamic conditions resulting from a drop test. The latter hydrodynamic conditions were obtained through an emperical fit of available data. Results obtained from a linear analysis were found to be consistent with results obtained elsewhere with NASTRAN and BOSOR. The nonlinear analysis showed that the originally assumed loads would result in failure of the shell structures. The nonlinear analysis also showed that it was useful to apply internal pressure as a stabilizing influence on collapse. A final analysis with an updated estimate of load conditions resulted in linear behavior up to full load.

Component mode synthesis and large deflection vibration of complex structures. Volume 3: Multiple-mode nonlinear free and forced vibrations of beams using finite element method

NASA Technical Reports Server (NTRS)

Mei, Chuh; Shen, Mo-How

1987-01-01

Multiple-mode nonlinear forced vibration of a beam was analyzed by the finite element method. Inplane (longitudinal) displacement and inertia (IDI) are considered in the formulation. By combining the finite element method and nonlinear theory, more realistic models of structural response are obtained more easily and faster.

The accuracy of the Gaussian-and-finite-element-Coulomb (GFC) method for the calculation of Coulomb integrals.

PubMed

Przybytek, Michal; Helgaker, Trygve

2013-08-07

We analyze the accuracy of the Coulomb energy calculated using the Gaussian-and-finite-element-Coulomb (GFC) method. In this approach, the electrostatic potential associated with the molecular electronic density is obtained by solving the Poisson equation and then used to calculate matrix elements of the Coulomb operator. The molecular electrostatic potential is expanded in a mixed Gaussian-finite-element (GF) basis set consisting of Gaussian functions of s symmetry centered on the nuclei (with exponents obtained from a full optimization of the atomic potentials generated by the atomic densities from symmetry-averaged restricted open-shell Hartree-Fock theory) and shape functions defined on uniform finite elements. The quality of the GF basis is controlled by means of a small set of parameters; for a given width of the finite elements d, the highest accuracy is achieved at smallest computational cost when tricubic (n = 3) elements are used in combination with two (γ(H) = 2) and eight (γ(1st) = 8) Gaussians on hydrogen and first-row atoms, respectively, with exponents greater than a given threshold (αmin (G)=0.5). The error in the calculated Coulomb energy divided by the number of atoms in the system depends on the system type but is independent of the system size or the orbital basis set, vanishing approximately like d(4) with decreasing d. If the boundary conditions for the Poisson equation are calculated in an approximate way, the GFC method may lose its variational character when the finite elements are too small; with larger elements, it is less sensitive to inaccuracies in the boundary values. As it is possible to obtain accurate boundary conditions in linear time, the overall scaling of the GFC method for large systems is governed by another computational step-namely, the generation of the three-center overlap integrals with three Gaussian orbitals. The most unfavorable (nearly quadratic) scaling is observed for compact, truly three-dimensional systems; however, this scaling can be reduced to linear by introducing more effective techniques for recognizing significant three-center overlap distributions.

Fast elemental screening of soil and sediment profiles using small-spot energy-dispersive X-ray fluorescence: application to mining sediments geochemistry.

PubMed

Gonzalez-Fernandez, Oscar; Queralt, Ignacio

2010-09-01

Elemental analysis of different sediment cores originating from the Cartagena-La Union mining district in Spain was carried out by means of a programmable small-spot energy-dispersive X-ray fluorescence (EDXRF) spectrometer to study the distribution of heavy metals along soil profiles. Cores were obtained from upstream sediments of a mining creek, from the lowland sedimentation plain, and from a mining landfill dump (tailings pile). A programmable two-dimensional (2D) stage and a focal spot resolution of 600 μm allow us to obtain complete core mapping. Geochemical results were verified using a more powerful wavelength-dispersion X-ray fluorescence (WDXRF) technique. The data obtained was processed in order to study the statistical correlations within the elemental compositions. The results obtained allow us to observe the differential in-depth distribution of heavy metals among the sampled zones. Dump site cores exhibit a homogeneous distribution of heavy metals, whereas the alluvial plain core shows accumulation of heavy metals in the upper part. This approach can be useful for the fast screening of heavy metals in depositional environments around mining sites.

Correlations of trace elements in breast human tissues: Evaluation of spatial distribution using μ-XRF

NASA Astrophysics Data System (ADS)

Silva, Marina Piacenti da; Silva, Deisy Mara da; Ribeiro-Silva, Alfredo; Poletti, Martin Eduardo

2012-05-01

The aim of this work is to investigate microscopic correlations between trace elements in breast human tissues. A synchrotron X-ray fluorescence microprobe system (μ-XRF) was used to obtain two-dimensional distribution of trace element Ca, Fe, Cu and Zn in normal (6 samples) and malignant (14 samples) breast tissues. The experiment was performed in X-ray Fluorescence beam line at Laboratório Nacional de Luz Síncrotron (LNLS), Campinas, Brazil. The white microbeam was generated with a fine conical capillary with a 20 μm output diameter. The samples were supported on a XYZ table. An optical microscope with motorized zoom was used for sample positioning and choice the area to be scanned. Automatic two-dimensional scans were programmed and performed with steps of 30 μm in each direction (x, y) on the selected area. The fluorescence signals were recorded using a Si(Li) detector, positioned at 90 degrees with respect to the incident beam, with a collection time of 10 s per point. The elemental maps obtained from each sample were overlap to observe correlation between trace elements. Qualitative results showed that the pairs of elements Ca-Zn and Fe-Cu could to be correlated in malignant breast tissues. Quantitative results, achieved by Spearman correlation tests, indicate that there is a spatial correlation between these pairs of elements (p < 0.001) suggesting the importance of these elements in metabolic processes associated with the development of the tumor.

Simulation Analysis of Tilted Polyhedron-Shaped Thermoelectric Elements

NASA Astrophysics Data System (ADS)

Meng, Xiangning; Suzuki, Ryosuke O.

2015-06-01

The generation of thermoelectricity is considered a promising approach to harness the waste heat generated in industries, automobiles, gas fields, and other man-made processes. The waste heat can be converted to electricity via a thermoelectric (TE) generator. In this light, the generator performance depends on the geometric configuration of its constituent elements as well as their material properties. Our previous work reported TE behaviors for modules consisting of parallelogram-shaped elements, because elements with tilted laminate structures provide increased mechanical stability and efficient heat-transferring ability from the hot surface to the cold surface. Here, we study TE elements in the shape of a polyhedron that is obtained by mechanically truncating the edges of a parallelogram element in order to further enhance the generator performance and reduce TE material usage. The TE performance of the modules consisting of these polyhedron elements is numerically simulated by using the finite-volume method. The output power, voltage, and current of the polyhedral TE module are greater than those of the parallelogram-element module. The polyhedron shape positively affects heat transfer and the flow of electric charges in the light of increasing the efficiency of conversion from heat to electricity. By varying the shape of the truncated portions, we determine the optimal shape that enables homogeneous heat flux distribution and slow diffusion of thermal energy to obtain the better efficiency of conversion of heat into electricity. We believe that the findings of our study can significantly contribute to the design policy in TE generation.

Elemental profiling of Noah's Ark shell (Arca noae, Linnaeus, 1758) by plasma optical spectrometry and chemometric tools.

PubMed

Kobelja, Kristina; Nemet, Ivan; Župan, Ivan; Čulin, Jelena; Rončević, Sanda

2016-12-01

Determination of metal content in biominerals provides essential information with respect to relations between biomineralization processes and environmental status. Mussels are species that have a great potential as bio-marker species and therefore, they are in the focus of numerous biomineralization and ecological studies. In this study, elemental profile of mussel shell of Noah's Ark (Arca noe, Linnaeus, 1758), which inhabit eastern Adriatic Sea was obtained by determination of seventeen elements content using inductively coupled plasma optical emission spectrometry (ICP-OES). Shell samples were collected from marine protected area and from marine shipping route in eastern Adriatic Sea. The accuracy of applied analytical procedure based on microwave decomposition of shell samples was tested by use of reference materials of limestone and by matrix-matched standards. By aid of chemometric methods, the elemental profile along with variability of elements content of shell was obtained. The impact of different environment on elements content was established by use of multivariate statistical PCA method. Discernment between two groups of samples was manifested. Among results of main, minor and trace elements content, the last one which denoted to Cd, Co, Cu, Pb, and Mn was expressed as principal distinctive feature of shell samples collected from different sampling sites. Elemental profiling of mussel shell Noah's Ark provides novel insight in species status as well as in environmental status on the observed locations. Copyright © 2016 Elsevier GmbH. All rights reserved.

Impact of screw configuration on the particle size distribution of granules produced by twin screw granulation.

PubMed

Vercruysse, J; Burggraeve, A; Fonteyne, M; Cappuyns, P; Delaet, U; Van Assche, I; De Beer, T; Remon, J P; Vervaet, C

2015-02-01

Twin screw granulation (TSG) has been reported by different research groups as an attractive technology for continuous wet granulation. However, in contrast to fluidized bed granulation, granules produced via this technique typically have a wide and multimodal particle size distribution (PSD), resulting in suboptimal flow properties. The aim of the current study was to evaluate the impact of granulator screw configuration on the PSD of granules produced by TSG. Experiments were performed using a 25 mm co-rotating twin screw granulator, being part of the ConsiGma™-25 system (a fully continuous from-powder-to-tablet manufacturing line from GEA Pharma Systems). Besides the screw elements conventionally used for TSG (conveying and kneading elements), alternative designs of screw elements (tooth-mixing-elements (TME), screw mixing elements (SME) and cutters) were investigated using an α-lactose monohydrate formulation granulated with distilled water. Granulation with only conveying elements resulted in wide and multimodal PSD. Using kneading elements, the width of the PSD could be partially narrowed and the liquid distribution was more homogeneous. However, still a significant fraction of oversized agglomerates was obtained. Implementing additional kneading elements or cutters in the final section of the screw configuration was not beneficial. Furthermore, granulation with only TME or SME had limited impact on the width of the PSD. Promising results were obtained by combining kneading elements with SME, as for these configurations the PSD was narrower and shifted to the size fractions suitable for tableting. Copyright © 2015 Elsevier B.V. All rights reserved.

Assessment of serum trace elements and electrolytes in children with childhood and atypical autism.

PubMed

Skalny, Anatoly V; Simashkova, Natalia V; Klyushnik, Tatiana P; Grabeklis, Andrei R; Radysh, Ivan V; Skalnaya, Margarita G; Nikonorov, Alexandr A; Tinkov, Alexey A

2017-09-01

The existing data demonstrate a significant interrelation between ASD and essential and toxic trace elements status of the organism. However, data on trace element homeostasis in particular ASD forms are insufficient. Therefore, the objective of the present study was to assess the level of trace elements and electrolytes in serum of children with childhood and atypical autism. A total of 48 children with ASD (24 with childhood and 24 with atypical autism) and age- and sex-adjusted controls were examined. Serum trace elements and electrolytes were assessed using inductively-coupled plasma mass spectrometry. The obtained data demonstrate that children with ASD unspecified are characterized by significantly lower Ni, Cr, and Se levels as compared to the age- and sex-matched controls. At the same time, significantly decreased serum Ni and Se concentrations were detected in patients with childhood autism. In turn, children with atypical autism were characterized by more variable serum trace element spectrum. In particular, atypical autism is associated with lower serum Al, As, Ni, Cr, Mn, and Se levels in comparison to the control values. Moreover, Al and Mn concentration in this group was also lower than that in childhood autism patients. Generally, the obtained data demonstrate lower levels of both essential and toxic trace elements in atypical autism group, being indicative of profound alteration of trace elements metabolism. However, further detailed metabolic studies are required to reveal critical differences in metabolic pathways being responsible for difference in trace element status and clinical course of the disease. Copyright © 2016 Elsevier GmbH. All rights reserved.

Design, development and use of the finite element machine

NASA Technical Reports Server (NTRS)

Adams, L. M.; Voigt, R. C.

1983-01-01

Some of the considerations that went into the design of the Finite Element Machine, a research asynchronous parallel computer are described. The present status of the system is also discussed along with some indication of the type of results that were obtained.

Plant macro- and micronutrient minerals

USDA-ARS?s Scientific Manuscript database

All plants must obtain a number of inorganic mineral elements from their environment to ensure successful growth and development of both vegetative and reproductive tissues. A total of fourteen mineral nutrients are considered to be essential. Several other elements have been shown to have beneficia...

Numerical Analysis of Stress Concentration in Isotropic and Laminated Plates with Inclined Elliptical Holes

NASA Astrophysics Data System (ADS)

Khechai, Abdelhak; Tati, Abdelouahab; Belarbi, Mohamed Ouejdi; Guettala, Abdelhamid

2018-03-01

The design of high-performance composite structures frequently includes discontinuities to reduce the weight and fastener holes for joining. Understanding the behavior of perforated laminates is necessary for structural design. In the current work, stress concentrations taking place in laminated and isotropic plates subjected to tensile load are investigated. The stress concentrations are obtained using a recent quadrilateral finite element of four nodes with 32 DOFs. The present finite element (PE) is a combination of two finite elements. The first finite element is a linear isoparametric membrane element and the second is a high precision Hermitian element. One of the essential objectives of the current investigation is to confirm the capability and efficiency of the PE for stress determination in perforated laminates. Different geometric parameters, such as the cutout form, sizes and cutout orientations, which have a considerable effect on the stress values, are studied. Using the present finite element formulation, the obtained results are found to be in good agreement with the analytical findings, which validates the capability and the efficiency of the proposed formulation. Finally, to understand the material parameters effect such as the orientation of fibers and degree of orthotropy ratio on the stress values, many figures are presented using different ellipse major to minor axis ratio. The stress concentration values are considerably affected by increasing the orientation angle of the fibers and degree of orthotropy.

Detection of Matrix Elements and Trace Impurities in Cu(In, Ga)Se2 Photovoltaic Absorbers Using Surface Analytical Techniques.

PubMed

Kim, Min Jung; Lee, Jihye; Kim, Seon Hee; Kim, Haidong; Lee, Kang-Bong; Lee, Yeonhee

2015-10-01

Chalcopyrite Cu(In, Ga)Se2 (CIGS) thin films are well known as the next-generation solar cell materials notable for their high absorption coefficient for solar radiation, suitable band gap, and ability for deposition on flexible substrate materials, allowing the production of highly flexible and lightweight solar panels. To improve solar cell performances, a quantitative and depth-resolved elemental analysis of photovoltaic thin films is much needed. In this study, Cu(In, Ga)Se2 thin films were prepared on molybdenum back contacts deposited on soda-lime glass substrates via three-stage evaporation. Surface analyses via AES and SIMS were used to characterize the CIGS thin films and compare their depth profiles. We determined the average concentration of the matrix elements, Cu, In, Ga, and Se, using ICP-AES, XRF, and EPMA. We also obtained depth profiling results using TOF-SIMS, magnetic sector SIMS and AES, and APT, a sub-nanometer resolution characterization technique that enables three-dimensional elemental mapping. The SIMS technique, with its high detection limit and ability to obtain the profiles of elements in parallel, is a powerful tool for monitoring trace elements in CIGS thin films. To identify impurities in a CIGS layer, the distribution of trace elements was also observed according to depth by SIMS and APT.

Quantification of rare earth elements using laser-induced breakdown spectroscopy

DOE PAGES

Martin, Madhavi; Martin, Rodger C.; Allman, Steve; ...

2015-10-21

In this paper, a study of the optical emission as a function of concentration of laser-ablated yttrium (Y) and of six rare earth elements, europium (Eu), gadolinium (Gd), lanthanum (La), praseodymium (Pr), neodymium (Nd), and samarium (Sm), has been evaluated using the laser-induced breakdown spectroscopy (LIBS) technique. Statistical methodology using multivariate analysis has been used to obtain the sampling errors, coefficient of regression, calibration, and cross-validation of measurements as they relate to the LIBS analysis in graphite-matrix pellets that were doped with elements at several concentrations. Each element (in oxide form) was mixed in the graphite matrix in percentages rangingmore » from 1% to 50% by weight and the LIBS spectra obtained for each composition as well as for pure oxide samples. Finally, a single pellet was mixed with all the elements in equal oxide masses to determine if we can identify the elemental peaks in a mixed pellet. This dataset is relevant for future application to studies of fission product content and distribution in irradiated nuclear fuels. These results demonstrate that LIBS technique is inherently well suited for the future challenge of in situ analysis of nuclear materials. Finally, these studies also show that LIBS spectral analysis using statistical methodology can provide quantitative results and suggest an approach in future to the far more challenging multielemental analysis of ~ 20 primary elements in high-burnup nuclear reactor fuel.« less

Ultimate Load Behaviour of Reinforced Concrete Beam with Corroded Reinforcement

NASA Astrophysics Data System (ADS)

Kanchana Devi, A.; Ramajaneyulu, K.; Sundarkumar, S.; Ramesh, G.; Bharat Kumar, B. H.; Krishna Moorthy, T. S.

2017-12-01

Corrosion of reinforcement reduces the load carrying capacity, energy dissipation and ductility of Reinforced Concrete (RC) members. In the present study, reinforcements of RC beam are subjected to 10, 25, and 30% corrosion and the respective RC beams are tested to evaluate their ultimate load behaviour. A huge drop in energy dissipation capacity of the RC beam is observed beyond the corrosion level of 10%. Further, nonlinear finite element analysis is employed to assess the load-displacement behaviour and ultimate load of RC beam. The corrosion induced damage to the reinforcement is represented in the finite element model by modifying its mechanical properties based on the results reported in the literature. The resultant load versus displacement curves of reinforced concrete beams are obtained. Good correlation is observed between the finite element analysis results and that obtained from experimental investigation on the control beam. The experimental results are also compared with the finite element analysis results for RC beams with corroded reinforcement. In order to understand the effect of corrosion on the mechanical properties of reinforcement, the corroded reinforcements are modelled in nonlinear finite element analysis by (i) reducing the area of reinforcement alone (ii) by reducing both area and mechanical properties and (iii) reducing the mechanical properties without reducing the area of steel as reported in literature. The results obtained for the beam with corroded reinforcement confirms reduction in yield stress and ultimate stress of the reinforcement steel.

Effect of Microscopic Damage Events on Static and Ballistic Impact Strength of Triaxial Braid Composites

NASA Technical Reports Server (NTRS)

Littell, Justin D.; Binienda, Wieslaw K.; Arnold, William A.; Roberts, Gary D.; Goldberg, Robert K.

2010-01-01

The reliability of impact simulations for aircraft components made with triaxial-braided carbon-fiber composites is currently limited by inadequate material property data and lack of validated material models for analysis. Methods to characterize the material properties used in the analytical models from a systematically obtained set of test data are also lacking. A macroscopic finite element based analytical model to analyze the impact response of these materials has been developed. The stiffness and strength properties utilized in the material model are obtained from a set of quasi-static in-plane tension, compression and shear coupon level tests. Full-field optical strain measurement techniques are applied in the testing, and the results are used to help in characterizing the model. The unit cell of the braided composite is modeled as a series of shell elements, where each element is modeled as a laminated composite. The braided architecture can thus be approximated within the analytical model. The transient dynamic finite element code LS-DYNA is utilized to conduct the finite element simulations, and an internal LS-DYNA constitutive model is utilized in the analysis. Methods to obtain the stiffness and strength properties required by the constitutive model from the available test data are developed. Simulations of quasi-static coupon tests and impact tests of a represented braided composite are conducted. Overall, the developed method shows promise, but improvements that are needed in test and analysis methods for better predictive capability are examined.

Electronic coupling matrix elements from charge constrained density functional theory calculations using a plane wave basis set

NASA Astrophysics Data System (ADS)

Oberhofer, Harald; Blumberger, Jochen

2010-12-01

We present a plane wave basis set implementation for the calculation of electronic coupling matrix elements of electron transfer reactions within the framework of constrained density functional theory (CDFT). Following the work of Wu and Van Voorhis [J. Chem. Phys. 125, 164105 (2006)], the diabatic wavefunctions are approximated by the Kohn-Sham determinants obtained from CDFT calculations, and the coupling matrix element calculated by an efficient integration scheme. Our results for intermolecular electron transfer in small systems agree very well with high-level ab initio calculations based on generalized Mulliken-Hush theory, and with previous local basis set CDFT calculations. The effect of thermal fluctuations on the coupling matrix element is demonstrated for intramolecular electron transfer in the tetrathiafulvalene-diquinone (Q-TTF-Q-) anion. Sampling the electronic coupling along density functional based molecular dynamics trajectories, we find that thermal fluctuations, in particular the slow bending motion of the molecule, can lead to changes in the instantaneous electron transfer rate by more than an order of magnitude. The thermal average, ( {< {| {H_ab } |^2 } > } )^{1/2} = 6.7 {mH}, is significantly higher than the value obtained for the minimum energy structure, | {H_ab } | = 3.8 {mH}. While CDFT in combination with generalized gradient approximation (GGA) functionals describes the intermolecular electron transfer in the studied systems well, exact exchange is required for Q-TTF-Q- in order to obtain coupling matrix elements in agreement with experiment (3.9 mH). The implementation presented opens up the possibility to compute electronic coupling matrix elements for extended systems where donor, acceptor, and the environment are treated at the quantum mechanical (QM) level.

A Small Range Six-Axis Accelerometer Designed with High Sensitivity DCB Elastic Element

PubMed Central

Sun, Zhibo; Liu, Jinhao; Yu, Chunzhan; Zheng, Yili

2016-01-01

This paper describes a small range six-axis accelerometer (the measurement range of the sensor is ±g) with high sensitivity DCB (Double Cantilever Beam) elastic element. This sensor is developed based on a parallel mechanism because of the reliability. The accuracy of sensors is affected by its sensitivity characteristics. To improve the sensitivity, a DCB structure is applied as the elastic element. Through dynamic analysis, the dynamic model of the accelerometer is established using the Lagrange equation, and the mass matrix and stiffness matrix are obtained by a partial derivative calculation and a conservative congruence transformation, respectively. By simplifying the structure of the accelerometer, a model of the free vibration is achieved, and the parameters of the sensor are designed based on the model. Through stiffness analysis of the DCB structure, the deflection curve of the beam is calculated. Compared with the result obtained using a finite element analysis simulation in ANSYS Workbench, the coincidence rate of the maximum deflection is 89.0% along the x-axis, 88.3% along the y-axis and 87.5% along the z-axis. Through strain analysis of the DCB elastic element, the sensitivity of the beam is obtained. According to the experimental result, the accuracy of the theoretical analysis is found to be 90.4% along the x-axis, 74.9% along the y-axis and 78.9% along the z-axis. The measurement errors of linear accelerations ax, ay and az in the experiments are 2.6%, 0.6% and 1.31%, respectively. The experiments prove that accelerometer with DCB elastic element performs great sensitive and precision characteristics. PMID:27657089

Ion Beam Analyses Of Bark And Wood In Environmental Studies

NASA Astrophysics Data System (ADS)

Lill, J.-O.; Saarela, K.-E.; Harju, L.; Rajander, J.; Lindroos, A.; Heselius, S.-J.

2011-06-01

A large number of wood and bark samples have been analysed utilizing particle-induced X-ray emission (PIXE) and particle-induced gamma-ray emission (PIGE) techniques. Samples of common tree species like Scots Pine, Norway Spruce and birch were collected from a large number of sites in Southern and Southwestern Finland. Some of the samples were from a heavily polluted area in the vicinity of a copper-nickel smelter. The samples were dry ashed at 550 °C for the removal of the organic matrix in order to increase the analytical sensitivity of the method. The sensitivity was enhanced by a factor of 50 for wood and slightly less for bark. The ashed samples were pressed into pellets and irradiated as thick targets with a millimetre-sized proton beam. By including the ashing procedure in the method, the statistical dispersion due to elemental heterogeneities in wood material could be reduced. As a by-product, information about the elemental composition of ashes was obtained. By comparing the concentration of an element in bark ash to the concentration in wood ash of the same tree useful information from environmental point of view was obtained. The obtained ratio of the ashes was used to distinguish between elemental contributions from anthropogenic atmospheric sources and natural geochemical sources, like soil and bedrock.

Plants as indicators of urban air pollution (ozone and trace elements) in Pisa, Italy.

PubMed

Nali, Cristina; Crocicchi, Lara; Lorenzini, Giacomo

2004-07-01

A biennial integrated survey, based on the use of vascular plants for the bioindication of the effects of tropospheric ozone, was performed in the area of Pisa (Tuscany, Central Italy). It also investigated the distribution of selected trace elements in plants and the data were compared with those obtained from the use of passive samplers, automatic analysers of ozone and lichen biodiversity. Photochemically produced ozone proved to be present during the warm season, with maximum hourly means surpassing 100 ppb: the use of supersensitive tobacco Bel-W3 confirmed the value of detailed, cost-effective, monitoring surveys. Trials with clover clones demonstrate that sensitive plants undergo severe biomass reduction in the current ozone regime. The mean NC-S (clover clone sensitive to ozone):NC-R (resistant) biomass ratio ranged from 0.7 (in 1999) to 0.5 (in 2000). The economic impact of these reductions deserves attention. The data obtained using passive ozone samplers exceeded those obtained using an automatic analyser. The mapping of epiphytic lichen biodiversity was not related to the geographical ozone distribution as can be seen from the tobacco's response. Lettuce plants grown under standardized conditions were used positively as bioaccumulators of trace elements: Pb was abundantly recovered, but a large portion of this element was removed by washing.

Water-quality, bed-sediment, and biological data (October 1993 through September 1994) and statistical summaries of data for streams in the Upper Clark Fork basin, Montana

USGS Publications Warehouse

Lambing, J.H.; Hornberger, Michelle I.; Axtmann, E.V.; Dodge, K.A.

1995-01-01

Water, bed sediment, and biota were sampled in streams from Butte to below Missoula as part of a program to characterize aquatic resources in the upper Clark Fork basin of western Montana. Water- quality data were obtained periodically at 16 stations during October 1993 through September 1994 (water year 1994); daily suspended-sediment data were obtained at six of these stations. Bed-sediment and biological data were obtained at 11 stations in August 1994. Sampling stations were located on the Clark Fork and major tributaries. The primary constituents analyzed were trace elements associated with mine tailings from historical mining and smelting activities. Water-quality data include concentrations of major ions, trace elements, and suspended sediment in samples collected periodically during water year 1994. Daily values of streamflow, suspended-sediment concentration, and suspended- sediment discharge are given for six stations. Bed- sediment data include trace-element concentrations in the fine and bulk fractions. Biological data include trace-element concentrations in whole-body tissue of aquatic benthic insects. Quality-assurance data are reported for analytical results of water, bed sediment, and biota. Statistical summaries of bed sediment, and biological data are provided for the period of record at each station since 1985.

Compliant Robot Wrist

NASA Technical Reports Server (NTRS)

Voellmer, George

1992-01-01

Compliant element for robot wrist accepts small displacements in one direction only (to first approximation). Three such elements combined to obtain translational compliance along three orthogonal directions, without rotational compliance along any of them. Element is double-blade flexure joint in which two sheets of spring steel attached between opposing blocks, forming rectangle. Blocks moved parallel to each other in one direction only. Sheets act as double cantilever beams deforming in S-shape, keeping blocks parallel.

Elemental mapping of biofortified wheat grains using micro X-ray fluorescence

NASA Astrophysics Data System (ADS)

Ramos, I.; Pataco, I. M.; Mourinho, M. P.; Lidon, F.; Reboredo, F.; Pessoa, M. F.; Carvalho, M. L.; Santos, J. P.; Guerra, M.

2016-06-01

Micro X-ray fluorescence has been used to obtain elemental maps of biofortified wheat grains. Two varieties of wheat were used in the study, Triticum aestivum L. and Triticum durum desf. Two treatments, with different nutrient concentration, were applied to the plants during the whole plant growth cycle. From the obtained elemental maps it was possible to extract information regarding the plant's physiological processes under the biofortification procedures. Both macro and micronutrients were mapped, providing useful insight into the posterior food processing mechanisms of this biofortified staple food. We have also shown that these kind of studies can now be performed with laboratory benchtop apparatus, rather than using synchrotron radiation, increasing the overall attractiveness of micro X-ray fluorescence in the study of highly heterogeneous biological samples.

Simulation of surface hardening in the deep rolling process by means of an axial symmetric nodal averaged finite element

NASA Astrophysics Data System (ADS)

Morrev, P. G.; Gordon, V. A.

2018-03-01

Surface hardening by deep rolling can be considered as the axial symmetric problem in some special events (namely, when large R and small r radii of the deforming roller meet the requirement R>> r). An axisymmetric nodal averaged stabilized finite element is formulated. The formulation is based on a variational principle with a penalty (stabilizing) item in order to involve large elastic-plastic strain and near to incompressible materials. The deep rolling process for a steel rod is analyzed. Axial residual stress, yield stress, and Odkvist’s parameter are calculated. The residual stress is compared with the data obtained by other authors using a three-dimensional statement of the problem. The results obtained demonstrate essential advantages of the newly developed finite element.

Multielement analysis and antioxidant capacity of Merlot wine clones developed in Montenegro.

PubMed

Đorđević, Neda O; Pejin, Boris; Novaković, Miroslav M; Stanković, Dalibor M; Mutić, Jelena J; Pajović, Snežana B; Tešević, Vele V

2018-02-01

The overall aim of this paper was to compare the multielement composition and antioxidant capacity of two Montenegrin Merlot wines obtained from specific vine clones (VCR1 and VCR 101) along with commercial Merlot wine throughout the consecutive vintages in 2010 and 2011. Elemental composition was analysed using inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS). Additionally, antioxidant capacity was assessed by cyclic voltammetry. VCR 1 wine from 2011 stood out for its elemental composition. On the other hand, antioxidant capacity of VCR 101 wines was the highest one for the both vintages. According to the experimental data obtained, all three wines are good source of essential elements and products with a significant antioxidant activity and specific geographical origin.

Heat transfer monitoring by means of the hot wire technique and finite element analysis software.

PubMed

Hernández Wong, J; Suarez, V; Guarachi, J; Calderón, A; Rojas-Trigos, J B; Juárez, A G; Marín, E

2014-01-01

It is reported the study of the radial heat transfer in a homogeneous and isotropic substance with a heat linear source in its axial axis. For this purpose, the hot wire characterization technique has been used, in order to obtain the temperature distribution as a function of radial distance from the axial axis and time exposure. Also, the solution of the transient heat transport equation for this problem was obtained under appropriate boundary conditions, by means of finite element technique. A comparison between experimental, conventional theoretical model and numerical simulated results is done to demonstrate the utility of the finite element analysis simulation methodology in the investigation of the thermal response of substances. Copyright © 2013 Elsevier Ltd. All rights reserved.

Determination of Nonlinear Stiffness Coefficients for Finite Element Models with Application to the Random Vibration Problem

NASA Technical Reports Server (NTRS)

Muravyov, Alexander A.

1999-01-01

In this paper, a method for obtaining nonlinear stiffness coefficients in modal coordinates for geometrically nonlinear finite-element models is developed. The method requires application of a finite-element program with a geometrically non- linear static capability. The MSC/NASTRAN code is employed for this purpose. The equations of motion of a MDOF system are formulated in modal coordinates. A set of linear eigenvectors is used to approximate the solution of the nonlinear problem. The random vibration problem of the MDOF nonlinear system is then considered. The solutions obtained by application of two different versions of a stochastic linearization technique are compared with linear and exact (analytical) solutions in terms of root-mean-square (RMS) displacements and strains for a beam structure.

Inelastic behavior of structural components

NASA Technical Reports Server (NTRS)

Hussain, N.; Khozeimeh, K.; Toridis, T. G.

1980-01-01

A more accurate procedure was developed for the determination of the inelastic behavior of structural components. The actual stress-strain curve for the mathematical of the structure was utilized to generate the force-deformation relationships for the structural elements, rather than using simplified models such as elastic-plastic, bilinear and trilinear approximations. relationships were generated for beam elements with various types of cross sections. In the generational of these curves, stress or load reversals, kinematic hardening and hysteretic behavior were taken into account. Intersections between loading and unloading branches were determined through an iterative process. Using the inelastic properties obtained, the plastic static response of some simple structural systems composed of beam elements was computed. Results were compared with known solutions, indicating a considerable improvement over response predictions obtained by means of simplified approximations used in previous investigations.

[Comparative study on five pretreatment methods for ICP-OES determination of mineral elements in Rosa rugosa].

PubMed

Zhao, Ning; Yang, Bin; Duan, Yu-Cen; Lei, Ran

2011-08-01

Abstract Five different pretreatment methods, including dry ashing and microwave digestion with four acid systems (HNO3 + H2O2, HNO3 + H2O2 + HF, HNO3 + HClO4 and HNO3 + HClO4 + HF), were employed for digestion of the samples of Rosa rugosa. Nine major and trace elements were determined using ICP-OES method. The addition standard recovery rates indicate that, with the system of HNO3 + HClO4, better results can be obtained for most of the determined elements. With this method, except for Fe, the recovery rates are in the range of 95.4%-104.6%. For Fe, higher recovery rate (99%) was obtained with HNO3 + H2O2 + HF system.

Modeling and Design of a Full-Scale Rotor Blade with Embedded Piezocomposite Actuators

NASA Astrophysics Data System (ADS)

Kovalovs, A.; Barkanov, E.; Ruchevskis, S.; Wesolowski, M.

2017-05-01

An optimization methodology for the design of a full-scale rotor blade with an active twist in order to enhance its ability to reduce vibrations and noise is presented. It is based on a 3D finite-element model, the planning of experiments, and the response surface technique to obtain high piezoelectric actuation forces and displacements with a minimum actuator weight and energy applied. To investigate an active twist of the helicopter rotor blade, a structural static analysis using a 3D finite-element model was carried out. Optimum results were obtained at two possible applications of macrofiber composite actuators. The torsion angle found from the finite-element simulation of helicopter rotor blades was successfully validated by its experimental values, which confirmed the modeling accuracy.

Variational approach to probabilistic finite elements

NASA Technical Reports Server (NTRS)

Belytschko, T.; Liu, W. K.; Mani, A.; Besterfield, G.

1991-01-01

Probabilistic finite element methods (PFEM), synthesizing the power of finite element methods with second-moment techniques, are formulated for various classes of problems in structural and solid mechanics. Time-invariant random materials, geometric properties and loads are incorporated in terms of their fundamental statistics viz. second-moments. Analogous to the discretization of the displacement field in finite element methods, the random fields are also discretized. Preserving the conceptual simplicity, the response moments are calculated with minimal computations. By incorporating certain computational techniques, these methods are shown to be capable of handling large systems with many sources of uncertainties. By construction, these methods are applicable when the scale of randomness is not very large and when the probabilistic density functions have decaying tails. The accuracy and efficiency of these methods, along with their limitations, are demonstrated by various applications. Results obtained are compared with those of Monte Carlo simulation and it is shown that good accuracy can be obtained for both linear and nonlinear problems. The methods are amenable to implementation in deterministic FEM based computer codes.

Variational approach to probabilistic finite elements

NASA Astrophysics Data System (ADS)

Belytschko, T.; Liu, W. K.; Mani, A.; Besterfield, G.

1991-08-01

Probabilistic finite element methods (PFEM), synthesizing the power of finite element methods with second-moment techniques, are formulated for various classes of problems in structural and solid mechanics. Time-invariant random materials, geometric properties and loads are incorporated in terms of their fundamental statistics viz. second-moments. Analogous to the discretization of the displacement field in finite element methods, the random fields are also discretized. Preserving the conceptual simplicity, the response moments are calculated with minimal computations. By incorporating certain computational techniques, these methods are shown to be capable of handling large systems with many sources of uncertainties. By construction, these methods are applicable when the scale of randomness is not very large and when the probabilistic density functions have decaying tails. The accuracy and efficiency of these methods, along with their limitations, are demonstrated by various applications. Results obtained are compared with those of Monte Carlo simulation and it is shown that good accuracy can be obtained for both linear and nonlinear problems. The methods are amenable to implementation in deterministic FEM based computer codes.

Variational approach to probabilistic finite elements

NASA Technical Reports Server (NTRS)

Belytschko, T.; Liu, W. K.; Mani, A.; Besterfield, G.

1987-01-01

Probabilistic finite element method (PFEM), synthesizing the power of finite element methods with second-moment techniques, are formulated for various classes of problems in structural and solid mechanics. Time-invariant random materials, geometric properties, and loads are incorporated in terms of their fundamental statistics viz. second-moments. Analogous to the discretization of the displacement field in finite element methods, the random fields are also discretized. Preserving the conceptual simplicity, the response moments are calculated with minimal computations. By incorporating certain computational techniques, these methods are shown to be capable of handling large systems with many sources of uncertainties. By construction, these methods are applicable when the scale of randomness is not very large and when the probabilistic density functions have decaying tails. The accuracy and efficiency of these methods, along with their limitations, are demonstrated by various applications. Results obtained are compared with those of Monte Carlo simulation and it is shown that good accuracy can be obtained for both linear and nonlinear problems. The methods are amenable to implementation in deterministic FEM based computer codes.

Effects of washing on mineral composition of leaf samples of Lycium andersonii

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wallace, A.; Romney, E.M.; Hunter, R.B.

1982-07-01

Leaves of Lycium andersonii A. Gray from 20 different shrubs from the northern Mojave Desert were collected. Half of each sample was washed in 1/10 N HCl followed with deionized water before analysis in triplicate by optical emission spectrometry, and the other half was analyzed unwashed. Washed samples contained 12, 35, 33, 40, 55, 47, 57, 8, 8, 9, and 20 percent, respectivey, less calcium, zinc, copper, iron, aluminum, silicon, titanium, strontium, barium, lithium, and lead than did unwashed leaves. The losses probably exceed contamination for some elements, because the results differed in some respects from those obtained for citrus.more » Statisticaly significant differences were not obtained for other elements analyzed. Even though 40 to 57 percent of the iron, aluminum, silicon, and titanium was washed from the leaves, cluster analyses grouped the four elements into a common cluster whether or not the leaves had been washed. Washing resulted in a lower coefficient of variation for some of the elements compared with unwashed leaves.« less

Strength Calculation of Inclined Sections of Reinforced Concrete Elements under Transverse Bending

NASA Astrophysics Data System (ADS)

Filatov, V. B.

2017-11-01

The authors propose a design model to determine the strength of inclined sections of bent reinforced concrete elements without shear reinforcement for the action of transverse force taking into account the aggregate interlock forces in the inclined crack. The calculated dependences to find out the components of forces acting in an inclined section are presented. The calculated dependences are obtained from the consideration of equilibrium conditions of the block over the inclined crack. A comparative analysis of the experimental values of the failure loads of the inclined section and the theoretical values obtained for the proposed dependencies and normative calculation methods is performed. It is shown that the proposed design model makes it possible to take into account the effect the longitudinal reinforcement percentage has on the inclined section strength, the element cross section height without the introduction of empirical coefficients which contributes to an increase in the structural safety of design solutions including the safety of high-strength concrete elements.

Nucleosynthesis: Stellar and Solar Abundances and Atomic Data

NASA Technical Reports Server (NTRS)

Cowan, John J.; Lawler, James E.; Sneden, Christopher; DenHartog, E. A.; Collier, Jason; Dodge, Homer L.

2006-01-01

Abundance observations indicate the presence of often surprisingly large amounts of neutron capture (i.e., s- and r-process) elements in old Galactic halo and globular cluster stars. These observations provide insight into the nature of the earliest generations of stars in the Galaxy the progenitors of the halo stars responsible for neutron-capture synthesis. Comparisons of abundance trends can be used to understand the chemical evolution of the Galaxy and the nature of heavy element nucleosynthesis. In addition age determinations, based upon long-lived radioactive nuclei abundances, can now be obtained. These stellar abundance determinations depend critically upon atomic data. Improved laboratory transition probabilities have been recently obtained for a number of elements. These new gf values have been used to greatly refine the abundances of neutron-capture elemental abundances in the solar photosphere and in very metal-poor Galactic halo stars. The newly determined stellar abundances are surprisingly consistent with a (relative) Solar System r-process pattern, and are also consistent with abundance predictions expected from such neutron-capture nucleosynthesis.

Computationally Efficient Modeling and Simulation of Large Scale Systems

NASA Technical Reports Server (NTRS)

Jain, Jitesh (Inventor); Koh, Cheng-Kok (Inventor); Balakrishnan, Vankataramanan (Inventor); Cauley, Stephen F (Inventor); Li, Hong (Inventor)

2014-01-01

A system for simulating operation of a VLSI interconnect structure having capacitive and inductive coupling between nodes thereof, including a processor, and a memory, the processor configured to perform obtaining a matrix X and a matrix Y containing different combinations of passive circuit element values for the interconnect structure, the element values for each matrix including inductance L and inverse capacitance P, obtaining an adjacency matrix A associated with the interconnect structure, storing the matrices X, Y, and A in the memory, and performing numerical integration to solve first and second equations.

The holistic analysis of gamma-ray spectra in instrumental neutron activation analysis

NASA Astrophysics Data System (ADS)

Blaauw, Menno

1994-12-01

A method for the interpretation of γ-ray spectra as obtained in INAA using linear least squares techniques is described. Results obtained using this technique and the traditional method previously in use at IRI are compared. It is concluded that the method presented performs better with respect to the number of detected elements, the resolution of interferences and the estimation of the accuracies of the reported element concentrations. It is also concluded that the technique is robust enough to obviate the deconvolution of multiplets.

Quality assessment of two- and three-dimensional unstructured meshes and validation of an upwind Euler flow solver

NASA Technical Reports Server (NTRS)

Woodard, Paul R.; Batina, John T.; Yang, Henry T. Y.

1992-01-01

Quality assessment procedures are described for two-dimensional unstructured meshes. The procedures include measurement of minimum angles, element aspect ratios, stretching, and element skewness. Meshes about the ONERA M6 wing and the Boeing 747 transport configuration are generated using an advancing front method grid generation package of programs. Solutions of Euler's equations for these meshes are obtained at low angle-of-attack, transonic conditions. Results for these cases, obtained as part of a validation study demonstrate accuracy of an implicit upwind Euler solution algorithm.

The Age of the First Nucleosynthesis in the Galaxy

NASA Astrophysics Data System (ADS)

Cayrel, R.; Hill, V.; Spite, M.; Spite, F.; François, P.; Depagne, E.; Nordström, B.; Andersen, J.; Plez, B.; Barbuy, B.; Beers, T.; Bonifacio, P.; Molaro, P.; Primas, F.

The observation of extremely metal-poor stars makes possible to obtain the epoch of formation of the first elements produced by massive supernovae, or hypernovae. The classical way of obtaining stellar ages (isochrone fitting) is unfortunately not applicable at present, as the distances of these stars are not known with enough accuracy. Dating by decay of radio-elements is another path, which has been renewed by the observation of uranium in the yellow giant CS 31082-001. We discuss the prospects opened by this discovery, and recent theoretical works triggered by this new opportunity.

Biological half-life of gaseous elemental iodine deposited onto rice grains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uchida, S.; Muramatsu, Y.; Sumiya, M.

In order to obtain the biological half-life (Tb) of iodine deposited on rough rice grains, rice plants of four different growing stages--heading, milky, dough, and yellow ripe--were exposed to elemental gaseous iodine. After the exposure, the rough rice samples were collected at different intervals and analyzed for iodine to estimate the value of Tb. The average value of Tb obtained by the experiments at the dough and yellow ripe stages was about 200 d. This value is considerably larger than those for pasture grass and leafy vegetables.

Axisymmetric solid elements by a rational hybrid stress method

NASA Technical Reports Server (NTRS)

Tian, Z.; Pian, T. H. H.

1985-01-01

Four-node axisymmetric solid elements are derived by a new version of hybrid method for which the assumed stresses are expressed in complete polynomials in natural coordinates. The stress equilibrium conditions are introduced through the use of additional displacements as Lagrange multipliers. A rational procedure is to choose the displacement terms such that the resulting strains are also of complete polynomials of the same order. Example problems all indicate that elements obtained by this procedure lead to better results in displacements and stresses than that by other finite elements.

Elemental mapping of biological samples using a scanning proton microprobe

NASA Astrophysics Data System (ADS)

Watt, F.; Grime, G. W.

1988-03-01

Elemental mapping using a scanning proton microprobe (SPM) can be a powerful technique for probing trace elements in biology, allowing complex interfaces to be studied in detail, identifying contamination and artefacts present in the specimen, and in certain circumstances obtaining indirect chemical information. Examples used to illustrate the advantages of the technique include the elemental mapping of growing pollen tubes, honey bee brain section, a mouse macrophage cell, human liver section exhibiting primary biliary cirrhosis, and the attack by a mildew fungus on a pea leaf.

Evaluation of the use of a singularity element in finite element analysis of center-cracked plates

NASA Technical Reports Server (NTRS)

Mendelson, A.; Gross, B.; Srawley, J., E.

1972-01-01

Two different methods are applied to the analyses of finite width linear elastic plates with central cracks. Both methods give displacements as a primary part of the solution. One method makes use of Fourier transforms. The second method employs a coarse mesh of triangular second-order finite elements in conjunction with a single singularity element subjected to appropriate additional constraints. The displacements obtained by these two methods are in very good agreement. The results suggest considerable potential for the use of a cracked element for related crack problems, particularly in connection with the extension to nonlinear material behavior.

In-situ measurement system

DOEpatents

Lord, David E.

1983-01-01

A multipurpose in situ underground measurement system comprising a plurality of long electrical resistance elements in the form of rigid reinforcing bars, each having an open loop "hairpin" configuration of shorter length than the other resistance elements. The resistance elements are arranged in pairs in a unitized structure, and grouted in place in the underground volume. The electrical resistance of each element and the difference in electrical resistance of the paired elements are obtained, which difference values may be used in analytical methods involving resistance as a function of temperature. A scanner sequentially connects the resistance-measuring apparatus to each individual pair of elements. A source of heating current is also selectively connectable for heating the elements to an initial predetermined temperature prior to electrical resistance measurements when used as an anemometer.

Communication: Wigner functions in action-angle variables, Bohr-Sommerfeld quantization, the Heisenberg correspondence principle, and a symmetrical quasi-classical approach to the full electronic density matrix

DOE PAGES

Miller, William H.; Cotton, Stephen J.

2016-08-28

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory - e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer valuesmore » of the action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states - and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.« less

Communication: Wigner functions in action-angle variables, Bohr-Sommerfeld quantization, the Heisenberg correspondence principle, and a symmetrical quasi-classical approach to the full electronic density matrix.

PubMed

Miller, William H; Cotton, Stephen J

2016-08-28

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory-e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer values of the action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states-and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.

Modeling and Accuracy Assessment for 3D-VIRTUAL Reconstruction in Cultural Heritage Using Low-Cost Photogrammetry: Surveying of the "santa MARÍA Azogue" Church's Front

NASA Astrophysics Data System (ADS)

Robleda Prieto, G.; Pérez Ramos, A.

2015-02-01

Sometimes it could be difficult to represent "on paper" an architectural idea, a solution, a detail or a newly created element, depending on the complexity what it want be conveyed through its graphical representation but it may be even harder to represent the existing reality. (a building, a detail,...), at least with an acceptable degree of definition and accuracy. As a solution to this hypothetical problem, this paper try to show a methodology to collect measure data by combining different methods or techniques, to obtain the characteristic geometry of architectonic elements, especially in those highly decorated and/or complex geometry, as well as to assess the accuracy of the results obtained, but in an accuracy level enough and not very expensive costs. In addition, we can obtain a 3D recovery model that allows us a strong support, beyond point clouds obtained through another more expensive methods as using laser scanner, to obtain orthoimages. This methodology was used in the study case of the 3D-virtual reconstruction of a main medieval church façade because of the geometrical complexity in many elements as the existing main doorway with archivolts and many details, as well as the rose window located above it so it's inaccessible due to the height.

Four-Element Composite Triangular Dielectric Resonator Antenna Using Li2O-1.94MgO-0.02Al2O3-P2O5 Ceramic for Wideband Applications

NASA Astrophysics Data System (ADS)

Kumari, Preeti; Tripathi, Pankaj; Sahu, B.; Singh, S. P.; Kumar, Devendra

2018-05-01

A simulation and fabrication study of a coaxial probe-fed four-element composite triangular dielectric resonator antenna (TDRA) using low loss Li2O-1.94MgO-0.02Al2O3-P2O5 (LMAP) ceramic and Teflon. LMAP ceramic was carried out and the ceramic was synthesized using a solid-state sintering route. The phase, microstructure and microwave dielectric properties of LMAP were investigated using x-ray diffraction pattern, scanning electron microscopy and a network analyzer. A coaxial probe-fed four-element composite TDRA was designed and fabricated using LMAP as one section of each composite element of the proposed antenna. Each triangular element of the proposed dielectric resonator antenna (DRA) consists of two sections of different dielectric constant materials. The inner triangular section touching the coaxial probe at one of its corners is made of the LMAP ceramic (ɛ r = 6.2) while othe uter section is made of Teflon (ɛ r = 2.1). Four triangular DRA elements are excited bya centrally located 50-Ω coaxial probe. The parametric study of the proposed antenna was performed through simulation using Ansys High Frequency Structure Simulator software by varying the dimensions and dielectric constants of both sections of each triangular element of the TDRA to optimize the results for obtaining a wideband antenna. The simulated resonant frequency of 9.30 GHz with a percentage bandwidth of 61.65% for the proposed antenna is obtained within its operating frequency range of 7.82-14.8 GHz. Monopole-like radiation patterns with low cross-polarization levels and a peak gain of 5.63 dB are obtained for the proposed antenna through simulation. The antenna prototype having optimized dimensions has also been fabricated. The experimental resonant frequency of 9.10 GHz with a percentage bandwidth of 66.09% is obtained within its operating frequency range of 7.70-15.30 GHz. It is found that the simulation results for the proposed antenna are in close agreement with the measured data. The proposed antenna can potentially be used in broadcast base stations, radar and satellite communications.

Constructing a sequence of palaeoDEMs to obtain erosion rates in a drainage basin.N

NASA Astrophysics Data System (ADS)

Castelltort, F. Xavier; Carles Balasch, J.; Cirés, Jordi; Colombo, Ferran

2017-04-01

DEMs made in a present-day drainage basin, considering it as a geomorphic unit, represent the end result of a landscape evolution. This process has had to follow a model of erosion. Trying to establish a conceptual erosion model in landscape evolution represents the first difficulty in constructing a sequence of palaeoDEMs. But if one is able to do it, the result will be easier and believable. The next step to do is to make a catalogue of base level types present in the drainage basin. The list has to include elements with determinate position and elevation (x, y, z) from the centre of the basin until hillslopes. A list of base level types may contain fluvial terrace remnants, erosive surfaces, palaeosols, alluvial covers of glacis, alluvial fans, rockfalls, landslides and scree zones. It is very important to know the spatial and temporal relations between the elements of the list, even if they are disconnected by erosion processes. Relative chronologies have to be set for all elements of the catalogue, and as far as possible absolute chronologies. To do it,it is essential to have established first the spatial relations between them, including those elements that are gone. Moreover, it is also essential to have adapted all the elements to the conceptual erosion model proposed. In this step, it has to be kept in mind that erosion rates can be very different in determinate areas within the same geomorphic unit. Erosion processes are focused in specific zones while other areas are maintained in stability. A good technique to construct a palaeoDEM is to start making, by hand, a map of contour lines. At this point, it is valuable to use the elements' catalogue. The use of those elements belonging to the same palaeosurface will result in a map. Several maps can be obtained from a catalogue. Contour maps can be gridded into a 3D surface by means of a specific application and a set of surfaces will be obtained. Algebraic operations can be done with palaeoDEMs obtaining positive or negative volumes corresponding to processes of erosion or aggradation. A case study of the application of palaeoDEMs is presented in the process of homoclinal shifting that is the origin of the strike valley of La Plana de Vic in the NE of Iberian Peninsula.

Modelling and performance analysis of four and eight element TCAS

NASA Technical Reports Server (NTRS)

Sampath, K. S.; Rojas, R. G.; Burnside, W. D.

1990-01-01

This semi-annual report describes the work performed during the period September 1989 through March 1990. The first section presents a description of the effect of the engines of the Boeing 737-200 on the performance of a bottom mounted eight-element traffic alert and collision avoidance system (TCAS). The second section deals exclusively with a four element TCAS antenna. The model obtained to simulate the four element TCAS and new algorithms developed for studying its performance are described. The effect of location on its performance when mounted on top of a Boeing 737-200 operating at 1060 MHz is discussed. It was found that the four element TCAS generally does not perform as well as the eight element TCAS III.

Modeling the Elastic and Damping Properties of the Multilayered Torsion Bar-Blade Structure of Rotors of Light Helicopters of the New Generation. 1. Finite-Element Approximation of the Torsion Bar

NASA Astrophysics Data System (ADS)

Paimushin, V. N.; Shishkin, V. M.

2015-11-01

A prismatic semiquadratic element with a nonclassical approximation of its displacements is suggested for modeling the composite and soft layers of a torsion bar and multilayered plate-rod structures. The stiffness, weight, damping, and geometric stiffness matrices of the above-mentioned element are obtained. Expressions for computing stresses in the finite element under the action of static loads and vibrations in the resonance zone are presented. Test examples confirming the validity of the element suggested are given. An example of finite element determination of the dynamic response of a multilayered torsion bar in the resonant mode is considered.

3D Higher Order Modeling in the BEM/FEM Hybrid Formulation

NASA Technical Reports Server (NTRS)

Fink, P. W.; Wilton, D. R.

2000-01-01

Higher order divergence- and curl-conforming bases have been shown to provide significant benefits, in both convergence rate and accuracy, in the 2D hybrid finite element/boundary element formulation (P. Fink and D. Wilton, National Radio Science Meeting, Boulder, CO, Jan. 2000). A critical issue in achieving the potential for accuracy of the approach is the accurate evaluation of all matrix elements. These involve products of high order polynomials and, in some instances, singular Green's functions. In the 2D formulation, the use of a generalized Gaussian quadrature method was found to greatly facilitate the computation and to improve the accuracy of the boundary integral equation self-terms. In this paper, a 3D, hybrid electric field formulation employing higher order bases and higher order elements is presented. The improvements in convergence rate and accuracy, compared to those resulting from lower order modeling, are established. Techniques developed to facilitate the computation of the boundary integral self-terms are also shown to improve the accuracy of these terms. Finally, simple preconditioning techniques are used in conjunction with iterative solution procedures to solve the resulting linear system efficiently. In order to handle the boundary integral singularities in the 3D formulation, the parent element- either a triangle or rectangle-is subdivided into a set of sub-triangles with a common vertex at the singularity. The contribution to the integral from each of the sub-triangles is computed using the Duffy transformation to remove the singularity. This method is shown to greatly facilitate t'pe self-term computation when the bases are of higher order. In addition, the sub-triangles can be further divided to achieve near arbitrary accuracy in the self-term computation. An efficient method for subdividing the parent element is presented. The accuracy obtained using higher order bases is compared to that obtained using lower order bases when the number of unknowns is approximately equal. Also, convergence rates obtained using higher order bases are compared to those obtained with lower order bases for selected sample

Elemental mapping in a contemporary miniature by full-field X-ray fluorescence imaging with gaseous detector vs. scanning X-ray fluorescence imaging with polycapillary optics

NASA Astrophysics Data System (ADS)

Silva, A. L. M.; Cirino, S.; Carvalho, M. L.; Manso, M.; Pessanha, S.; Azevedo, C. D. R.; Carramate, L. F. N. D.; Santos, J. P.; Guerra, M.; Veloso, J. F. C. A.

2017-03-01

Energy dispersive X-ray imaging can be used in several research fields and industrial applications. Elemental mapping through energy dispersive X-ray imaging technique has become a promising method to obtain positional distribution of specific elements in a non-destructive way. To obtain the elemental distribution of a sample it is necessary to use instruments capable of providing a precise positioning together with a good energy resolution. Polycapillary beams together with silicon drift chamber detectors are used in several commercial systems and are considered state-of-the-art spectrometers, however they are usually very costly. A new concept of large energy dispersive X-ray imaging systems based on gaseous radiation detectors emerged in the last years enabling a promising 2D elemental detection at a very reduced price. The main goal of this work is to analyze a contemporary Indian miniature with both X-ray fluorescence imaging systems, the one based on a gaseous detector 2D-THCOBRA and the state-of-the-art spectrometer M4 Tornado, from Bruker. The performance of both systems is compared and evaluated in the context of the sample's analysis.

Non-malignant thyroid disease after exposure to radioactive elements during nuclear explosion: a neglected issue.

PubMed

Wiwanitkit, Viroj

2012-01-01

Recent nuclear explosion in Japan led to a great concern regarding its detrimental effects on health. As obtained data imply the increased risk of thyroid cancer, the prevention is widely suggested. Also the adverse effect of leaked radioactive elements can lead to non-malignant thyroid disease, which is neglected. In this article, non-malignant thyroid disease after exposure to radioactive elements during nuclear explosion was reviewed and discussed.

Isogeometric Analysis of Nearly Incompressible Large Strain Plasticity

DTIC Science & Technology

2011-11-01

can see that the deformation is too localized in the first layer of elements and that it is difficult to obtain an accurate solution. How - ever, we...elements produced accurate displace- ments and stresses in all cases. An initial applica- tion to a problem of plasticity was presented but the subject...other hand, stress distributions, in the form of contour plots, are the most revealing measure of element performance. We also determine that the

Predictions of the residue cross-sections for the elements Z = 113 and Z = 114

NASA Astrophysics Data System (ADS)

Bouriquet, B.; Abe, Y.; Kosenko, G.

2004-10-01

A good reproduction of experimental excitation functions is obtained for the 1 n reactions producing the elements with Z = 108, 110, 111 and 112 by the combined usage of the two-step model for fusion and the statistical decay code KEWPIE. Furthermore, the model provides reliable predictions of productions of the elements with Z = 113 and Z = 114 which will be a useful guide for plannings of experiments.

Development and application of a technique for reducing airframe finite element models for dynamics analysis

NASA Technical Reports Server (NTRS)

Hashemi-Kia, Mostafa; Toossi, Mostafa

1990-01-01

A computational procedure for the reduction of large finite element models was developed. This procedure is used to obtain a significantly reduced model while retaining the essential global dynamic characteristics of the full-size model. This reduction procedure is applied to the airframe finite element model of AH-64A Attack Helicopter. The resulting reduced model is then validated by application to a vibration reduction study.

Fabrication of amplitude-phase type diffractive optical elements in aluminium films

NASA Astrophysics Data System (ADS)

Fomchenkov, S. A.; Butt, M. A.

2017-11-01

In the course of studies have been conducted a method of forming the phase diffractive optical elements (DOEs) by direct laser writing in thin films of aluminum. The quality of the aluminum films were investigated depending on the parameters of magnetron sputtering process. Moreover, the parameters of the laser writing process in thin films of aluminum were optimized. The structure of phase diffractive optical elements was obtained by the proposed method.

Using laser micro mass spectrometry with the LAMMA-1000 instrument for monitoring relative elemental concentrations in vitrinite

USGS Publications Warehouse

Morelli, J.J.; Hercules, D.M.; Lyons, P.C.; Palmer, C.A.; Fletcher, J.D.

1988-01-01

The variation in relative elemental concentrations among a series of coal macerals belonging to the vitrinite maceral group was determined using laser micro mass spectrometry (LAMMS). Variations in Ba, Cr, Ga, Sr, Ti, and V concentrations among the coals were determined using the LAMM A-1000 instrument. LAMMS analysis is not limited to these elements; their selection illustrates the application of the technique. Ba, Cr, Ga, Sr, Ti, and V have minimal site-to-site variance in the vitrinite macerals of the studied coals as measured by LAMMS. The LAMMS data were compared with bulk elemental data obtained by instrumental neutron activation analysis (INAA) and D. C. arc optical emission spectroscopy (DCAS) in order to determine the reliability of the LAMMS data. The complex nature of the ionization phenomena in LAMMS and the lack of standards characterized on a microscale makes obtaining quantitative elemental data within the ionization microvolume difficult; however, we demonstrate that the relative variation of an element among vitrinites from different coal beds in the eastern United States can be observed using LAMMS in a "bulk" mode by accumulating signal intensities over several microareas of each vitrinite. Our studies indicate gross changes (greater than a factor of 2 to 5 depending on the element) can be monitored when the elemental concentration is significantly above the detection limit. "Bulk" mode analysis was conducted to evaluate the accuracy of future elemental LAMMS microanalyses. The primary advantage of LAMMS is the inherent spatial resolution, ~ 20 ??m for coal. Two different vitrite bands in the Lower Bakerstown coal bed (CLB-1) were analyzed. The analysis did not establish any certain concentration differences in Ba, Cr, Ga, Sr, Ti, and V between the two bands. ?? 1988 Springer-Verlag.

Rolling-Element Fatigue Testing and Data Analysis - A Tutorial

NASA Technical Reports Server (NTRS)

Vlcek, Brian L.; Zaretsky, Erwin V.

2011-01-01

In order to rank bearing materials, lubricants and other design variables using rolling-element bench type fatigue testing of bearing components and full-scale rolling-element bearing tests, the investigator needs to be cognizant of the variables that affect rolling-element fatigue life and be able to maintain and control them within an acceptable experimental tolerance. Once these variables are controlled, the number of tests and the test conditions must be specified to assure reasonable statistical certainty of the final results. There is a reasonable correlation between the results from elemental test rigs with those results obtained with full-scale bearings. Using the statistical methods of W. Weibull and L. Johnson, the minimum number of tests required can be determined. This paper brings together and discusses the technical aspects of rolling-element fatigue testing and data analysis as well as making recommendations to assure quality and reliable testing of rolling-element specimens and full-scale rolling-element bearings.

Sequential patterns of essential trace elements composition in Gracilaria verrucosa and its generated products

NASA Astrophysics Data System (ADS)

Izzati, Munifatul; Haryanti, Sri; Parman, Sarjana

2018-05-01

Gracilaria widely known as a source of essential trace elements. However this red seaweeds also has great potential for being developed into commercial products. This study examined the sequential pattern of essential trace elements composition in fresh Gracilaria verrucosa and a selection of its generated products, nemely extracted agar, Gracilaria salt and Gracilaria residue. The sample was collected from a brackish water pond, located in north part Semarang, Central Java. The collected sample was then dried under the sun, and subsequently processed into aformentioned generated products. The Gracilaria salt was obtain by soaking the sun dried Gracilaria overnight in fresh water overnight. The resulted salt solution was then boiled leaving crystal salt. Extracted agar was obtained with alkali agar extraction method. The rest of remaining material was considered as Gracilaria residue. The entire process was repeated 3 times. The compositin of trace elements was examined using ICP-MS Spectrometry. Collected data was then analyzed by ANOVA single factor. Resulting sequential pattern of its essential trace elements composition was compared. A regular table salt was used as controls. Resuts from this study revealed that Gracilaria verrucosa and its all generated products all have similarly patterned the composition of essential trace elements, where Mn>Zn>Cu>Mo. Additionally this pattern is similar to different subspecies of Gracilaria from different location and and different season. However, Gracilaria salt has distinctly different pattern of sequential essential trace elements composition compared to table salt.

Obtaining Approximate Values of Exterior Orientation Elements of Multi-Intersection Images Using Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Li, X.; Li, S. W.

2012-07-01

In this paper, an efficient global optimization algorithm in the field of artificial intelligence, named Particle Swarm Optimization (PSO), is introduced into close range photogrammetric data processing. PSO can be applied to obtain the approximate values of exterior orientation elements under the condition that multi-intersection photography and a small portable plane control frame are used. PSO, put forward by an American social psychologist J. Kennedy and an electrical engineer R.C. Eberhart, is a stochastic global optimization method based on swarm intelligence, which was inspired by social behavior of bird flocking or fish schooling. The strategy of obtaining the approximate values of exterior orientation elements using PSO is as follows: in terms of image coordinate observed values and space coordinates of few control points, the equations of calculating the image coordinate residual errors can be given. The sum of absolute value of each image coordinate is minimized to be the objective function. The difference between image coordinate observed value and the image coordinate computed through collinear condition equation is defined as the image coordinate residual error. Firstly a gross area of exterior orientation elements is given, and then the adjustment of other parameters is made to get the particles fly in the gross area. After iterative computation for certain times, the satisfied approximate values of exterior orientation elements are obtained. By doing so, the procedures like positioning and measuring space control points in close range photogrammetry can be avoided. Obviously, this method can improve the surveying efficiency greatly and at the same time can decrease the surveying cost. And during such a process, only one small portable control frame with a couple of control points is employed, and there are no strict requirements for the space distribution of control points. In order to verify the effectiveness of this algorithm, two experiments are carried out. In the first experiment, images of a standard grid board are taken according to multi-intersection photography using digital camera. Three points or six points which are located on the left-down corner of the standard grid are regarded as control points respectively, and the exterior orientation elements of each image are computed through PSO, and compared with these elements computed through bundle adjustment. In the second experiment, the exterior orientation elements obtained from the first experiment are used as approximate values in bundle adjustment and then the space coordinates of other grid points on the board can be computed. The coordinate difference of grid points between these computed space coordinates and their known coordinates can be used to compute the accuracy. The point accuracy computed in above experiments are ±0.76mm and ±0.43mm respectively. The above experiments prove the effectiveness of PSO used in close range photogrammetry to compute approximate values of exterior orientation elements, and the algorithm can meet the requirement of higher accuracy. In short, PSO can get better results in a faster, cheaper way compared with other surveying methods in close range photogrammetry.

A novel automotive headlight system based on digital micro-mirror devices and diffractive optical elements

NASA Astrophysics Data System (ADS)

Su, Ping; Song, Yuming; Ma, Jianshe

2018-01-01

The DMD (Digital Micro-mirror Device) has the advantages of high refresh rate and high diffraction efficiency, and these make it become an ideal loader of multiple modes illumination. DOEs (Diffractive Optical Element) have the advantages of high degree of freedom, light weight, easy to copy, low cost etc., and can be used to reduce the weight, complexity, cost of optical system. A novel automotive headlamp system using DMD as the light distribution element and a DOE as the light field modulation device is proposed in this paper. The pure phase DOE is obtained by the GS algorithm using Rayleigh-Sommerfeld diffraction integral model. Based on the standard automotive headlamp light intensity distribution in the target plane, the amplitude distribution of DMD is obtained by numerical simulation, and the grayscale diagram loaded on the DMD can be obtained accordingly. Finally, according to simulation result, the light intensity distribution in the target plane is proportional to the national standard, hence verifies the validity of the novel system. The novel illumination system proposed in this paper provides a reliable hardware platform for the intelligent headlamps.

Spin-1 Particles and Perturbative QCD

NASA Astrophysics Data System (ADS)

de Melo, J. P. B. C.; Frederico, T.; Ji, Chueng-Ryong

2018-07-01

Due to the angular condition in the light-front dynamics (LFD), the extraction of the electromagnetic form factors for spin-1 particles can be uniquely determined taking into account implicitly non-valence and/or the zero-mode contributions to the matrix elements of the electromagnetic current. No matter which matrix elements of the electromagnetic current is used to extract the electromagnetic form factors, the same unique result is obtained. As physical observables, the electromagnetic form factors obtained from matrix elements of the current in LFD must be equal to those obtained in the instant form calculations. Recently, the Babar collaboration (Phys Rev D 78:071103, 2008) has analyzed the reaction e^+ + e^-→ ρ ^+ + ρ ^- at √{s}=10.58 GeV to measure the cross section as well as the ratios of the helicity amplitudes F_{λ 'λ }. We present our recent analysis of the Babar data for the rho meson considering the angular condition in LFD to put a stringent test on the onset of asymptotic perturbative QCD and predict the energy regime where the subleading contributions are still considerable.

Chemical resolution of Pu+ from U+ and Am+ using a band-pass reaction cell inductively coupled plasma mass spectrometer.

PubMed

Tanner, Scott D; Li, Chunsheng; Vais, Vladimir; Baranov, Vladimir I; Bandura, Dmitry R

2004-06-01

Determination of the concentration and distribution of the Pu and Am isotopes is hindered by the isobaric overlaps between the elements themselves and U, generally requiring time-consuming chemical separation of the elements. A method is described in which chemical resolution of the elemental ions is obtained through ion-molecule reactions in a reaction cell of an ICPMS instrument. The reactions of "natural" U(+), (242)Pu(+), and (243)Am(+) with ethylene, carbon dioxide, and nitric oxide are reported. Since the net sensitivities to the isotopes of an element are similar, chemical resolution is inferred when one isobaric element reacts rapidly with a given gas and the isobar (or in this instance surrogate isotope) is unreactive or slowly reactive. Chemical resolution of the m/z 238 isotopes of U and Pu can be obtained using ethylene as a reaction gas, but little improvement in the resolution of the m/z 239 isobars is obtained. However, high efficiency of reaction of U(+) and UH(+) with CO(2), and nonreaction of Pu(+), allows the sub-ppt determination of (239)Pu, (240)Pu, and (242)Pu (single ppt for (238)Pu) in the presence of 7 orders of magnitude excess U matrix without prior chemical separation. Similarly, oxidation of Pu(+) by NO, and nonreaction of Am(+), permit chemical resolution of the isobars of Pu and Am over 2-3 orders of magnitude relative concentration. The method provides the potential for analysis of the actinides with reduced sample matrix separation.

SU-F-207-05: Excess Heat Corrections in a Prototype Calorimeter for Direct Realization of CT Absorbed Dose to Phantom

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen-Mayer, H; Tosh, R

2015-06-15

Purpose: To reconcile air kerma and calorimetry measurements in a prototype calorimeter for obtaining absorbed dose in diagnostic CT beams. While corrections for thermal artifacts are routine and generally small in calorimetry of radiotherapy beams, large differences in relative stopping powers of calorimeter materials at the lower energies typical of CT beams greatly magnify their effects. Work-to-date on the problem attempts to reconcile laboratory measurements with modeling output from Monte Carlo and finite-element analysis of heat transfer. Methods: Small thermistor beads were embedded in a polystyrene (PS) core element of 1 cm diameter, which was inserted into a cylindrical HDPEmore » phantom of 30 cm diameter and subjected to radiation in a diagnostic CT x-ray imaging system. Resistance changes in the thermistors due to radiation heating were monitored via lock-in amplifier. Multiple 3-second exposures were recorded at 8 different dose-rates from the CT system, and least-squares fits to experimental data were compared to an expected thermal response obtained by finite-element analysis incorporating source terms based on semi-empirical modeling and Monte Carlo simulation. Results: Experimental waveforms exhibited large thermal artifacts with fast time constants, associated with excess heat in wires and glass, and smaller steps attributable to radiation heating of the core material. Preliminary finite-element analysis follows the transient component of the signal qualitatively, but predicts a slower decay of temperature spikes. This was supplemented by non-linear least-squares fits incorporating semi-empirical formulae for heat transfer, which were used to obtain dose-to-PS in reasonable agreement with the output of Monte Carlo calculations that converts air kerma to absorbed dose. Conclusion: Discrepancies between the finite-element analysis and our experimental data testify to the very significant heat transfer correction required for absorbed dose calorimetry of diagnostic CT beams. The results obtained here are being used to refine both simulations and design of calorimeter core components.« less

Structural Modeling of a Five-Meter Thin Film Inflatable Antenna/Concentrator With Rigidized Support Struts

NASA Technical Reports Server (NTRS)

Smalley, Kurt B.; Tinker, Michael L.

2001-01-01

Dynamic characterization of a non-rigidized thin film inflatable antenna/solar concentrator structure with rigidized composite support struts is described in detail. A two-step finite element modeling approach in MSC/NASTRAN is utilized, consisting of: (1) a nonlinear static pressurization procedure used to obtain the updated stiffness matrix, and (2) a modal "restart" eigen solution that uses the modified stiffness matrix. Unique problems encountered in modeling of this large 5-m lightweight inflatable are identified, including considerable difficulty in obtaining convergence in the nonlinear pressurization solution. It was found that the extremely thin polyimide film material (.001 in or I mil) presents tremendous problems in obtaining a converged solution when internal pressure loading is applied. It was concluded that the ratios of film thickness to other geometric dimensions such as torus cross-sectional and ring diameter and lenticular diameter are the critical parameters for convergence of the pressurization procedure. Comparison of finite element predictions for frequency and mode shapes with experimental results indicated reasonable agreement considering the complexity of the structure, the film-to-air interaction, and the nonlinear material properties of the film. It was also concluded that analysis should be done using different finite element to codes to determine if a more robust and stable solution can be obtained.

In situ measurement system

DOEpatents

Lord, D.E.

1980-11-24

A multipurpose in situ underground measurement system comprising a plurality of long electrical resistance elements in the form of rigid reinforcing bars, each having an open loop hairpin configuration of shorter length than the other resistance elements. The resistance elements are arranged in pairs in a unitized structure, and grouted in place in the underground volume. Measurement means are provided for obtaining for each pair the electrical resistance of each element and the difference in electrical resistance of the paired elements, which difference values may be used in analytical methods involving resistance as a function of temperature. A scanner means sequentially connects the resistance-measuring apparatus to each individual pair of elements. A source of heating current is also selectively connectable for heating the elements to an initial predetermined temperature prior to electrical resistance measurements when used as an anemometer.

Transient analysis of 1D inhomogeneous media by dynamic inhomogeneous finite element method

NASA Astrophysics Data System (ADS)

Yang, Zailin; Wang, Yao; Hei, Baoping

2013-12-01

The dynamic inhomogeneous finite element method is studied for use in the transient analysis of onedimensional inhomogeneous media. The general formula of the inhomogeneous consistent mass matrix is established based on the shape function. In order to research the advantages of this method, it is compared with the general finite element method. A linear bar element is chosen for the discretization tests of material parameters with two fictitious distributions. And, a numerical example is solved to observe the differences in the results between these two methods. Some characteristics of the dynamic inhomogeneous finite element method that demonstrate its advantages are obtained through comparison with the general finite element method. It is found that the method can be used to solve elastic wave motion problems with a large element scale and a large number of iteration steps.

Trace Elements Characteristic Based on ICP-AES and the Correlation of Flavonoids from Sparganii rhizoma.

PubMed

Wang, Xinsheng; Wu, Yanfang; Wu, Chengying; Wu, Qinan; Niu, Qingshan

2018-04-01

The aim of the present work was to investigate the trace elements and the correlation with flavonoids from Sparganii rhizoma. The ICP-AES and ultraviolet-visible spectroscopy were employed to analyze trace elements and flavonoids. The concentrations of trace elements and flavonoids were calculated using standard curve. The content of flavonoids was expressed as rutin equivalents. The cluster analysis was applied to evaluate geographical features of S. rhizoma from different geographical regions. The correlation analysis was used to obtain the relationship between the trace elements and flavonoids. The results indicated that the 15 trace elements were measured and the K, Ca, Mg, Na, Mn, Al, Cu, and Zn are rich in Sparganii rhizome. The different producing regions samples were classified into four groups. There was a weak relationship between trace elements and flavonoids.

42 CFR 420.304 - Procedures for obtaining access to books, documents, and records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Procedures for obtaining access to books, documents... Books, Documents, and Records of Subcontractors § 420.304 Procedures for obtaining access to books... following elements: (1) Reasonable identification of the books, documents, and records to which access is...

Direct tests of a pixelated microchannel plate as the active element of a shower maximum detector

DOE PAGES

Apresyan, A.; Los, S.; Pena, C.; ...

2016-05-07

One possibility to make a fast and radiation resistant shower maximum detector is to use a secondary emitter as an active element. We report our studies of microchannel plate photomultipliers (MCPs) as the active element of a shower-maximum detector. We present test beam results obtained using Photonis XP85011 to detect secondary particles of an electromagnetic shower. We focus on the use of the multiple pixels on the Photonis MCP in order to find a transverse two-dimensional shower distribution. A spatial resolution of 0.8 mm was obtained with an 8 GeV electron beam. As a result, a method for measuring themore » arrival time resolution for electromagnetic showers is presented, and we show that time resolution better than 40 ps can be achieved.« less

Direct tests of a pixelated microchannel plate as the active element of a shower maximum detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Apresyan, A.; Los, S.; Pena, C.

One possibility to make a fast and radiation resistant shower maximum detector is to use a secondary emitter as an active element. We report our studies of microchannel plate photomultipliers (MCPs) as the active element of a shower-maximum detector. We present test beam results obtained using Photonis XP85011 to detect secondary particles of an electromagnetic shower. We focus on the use of the multiple pixels on the Photonis MCP in order to find a transverse two-dimensional shower distribution. A spatial resolution of 0.8 mm was obtained with an 8 GeV electron beam. As a result, a method for measuring themore » arrival time resolution for electromagnetic showers is presented, and we show that time resolution better than 40 ps can be achieved.« less

Static shape control for adaptive wings

NASA Astrophysics Data System (ADS)

Austin, Fred; Rossi, Michael J.; van Nostrand, William; Knowles, Gareth; Jameson, Antony

1994-09-01

A theoretical method was developed and experimentally validated, to control the static shape of flexible structures by employing internal translational actuators. A finite element model of the structure, without the actuators present, is employed to obtain the multiple-input, multiple-output control-system gain matrices for actuator-load control as well as actuator-displacement control. The method is applied to the quasistatic problem of maintaining an optimum-wing cross section during various transonic-cruise flight conditions to obtain significant reductions in the shock-induced drag. Only small, potentially achievable, adaptive modifications to the profile are required. The adaptive-wing concept employs actuators as truss elements of active ribs to reshape the wing cross section by deforming the structure. Finite element analyses of an adaptive-rib model verify the controlled-structure theory. Experiments on the model were conducted, and arbitrarily selected deformed shapes were accurately achieved.

Performance characteristics of LOX-H2, tangential-entry, swirl-coaxial, rocket injectors

NASA Technical Reports Server (NTRS)

Howell, Doug; Petersen, Eric; Clark, Jim

1993-01-01

Development of a high performing swirl-coaxial injector requires an understanding of fundamental performance characteristics. This paper addresses the findings of studies on cold flow atomic characterizations which provided information on the influence of fluid properties and element operating conditions on the produced droplet sprays. These findings are applied to actual rocket conditions. The performance characteristics of swirl-coaxial injection elements under multi-element hot-fire conditions were obtained by analysis of combustion performance data from three separate test series. The injection elements are described and test results are analyzed using multi-variable linear regression. A direct comparison of test results indicated that reduced fuel injection velocity improved injection element performance through improved propellant mixing.

Elemental analysis with external-beam PIXE

NASA Astrophysics Data System (ADS)

Lin, E. K.; Wang, C. W.; Teng, P. K.; Huang, Y. M.; Chen, C. Y.

1992-05-01

A beamline system and experimental setup has been established for elemental analysis using PIXE with an external beam. Experiments for the study of the elemental composition of ancient Chinese potsherds (the Min and Ching ages) were performed. Continuum X-ray spectra from the samples bombarded by 3 MeV protons have been measured with a Si(Li) detector. From the analysis of PIXE data, the concentration of the main elements (Al, Si, K, and Ca) and of more than ten trace elements in the matrices and glazed surfaces were determined. Results for two different potsherds are presented, and those obtained from the glaze colorants are compared with the results of measurements on a Ching blue-and-white porcelain vase.

Characterization of methicillin-resistant Staphylococcus spp. isolated from dogs in Korea.

PubMed

Jang, Yunho; Bae, Dong hwa; Cho, Jae-Keun; Bahk, Gyung Jin; Lim, Suk-Kyung; Lee, Young Ju

2014-11-01

Staphylococci were isolated from dogs in animal hospitals, animal shelters, and the Daegu PET EXPO to investigate the characteristics of circulating methicillin-resistant Staphylococcal (MRS) strains in companion animals in Korea. A total of 36/157 isolates were classified as MRS, and subdivided as follows: 1 methicillin-resistant Staphylococcus aureus (MRSA), 4 methicillin-resistant Staphylococcus epidermidis, 2 methicillin-resistant Staphylococcus haemolyticus, and 29 MRS spp. Among the 36 MRS isolates tested, 100% were resistant to oxacillin and penicillin, and at least 50% were resistant to sulfamethoxazole/trimethoprim (69.4%), erythromycin (63.9%), tetracycline (58.3%), cefoxitin (55.6%), clindamycin (50.0%) or pirlimycin (50.0%). Additionally, 34/36 MRS isolates (94.4%) were mecA positive, 15 of which were further classified as SCCmec type V, 6 isolates as type I, 4 isolates as type IIIb, 1 isolate as type IVa, 1 isolate as type IV, with 7 isolates being non-classifiable. The results of multilocus sequence typing and spa typing for the one MRSA strain were ST 72 (1-4-1-8-4-4-3) and spa t148. Our results provide evidence that companion animals like dogs may be MRS carriers, and that continued surveillance of MRS in companion animals is required to prevent increased incidences in humans.

Enterotoxin gene profile of methicillin-resistant Staphylococcus pseudintermedius isolates from dogs, humans and the environment.

PubMed

Phumthanakorn, Nathita; Fungwithaya, Punpichaya; Chanchaithong, Pattrarat; Prapasarakul, Nuvee

2018-06-01

This study aimed to detect and identify staphylococcal enterotoxin (SE) genes in methicillin-resistant Staphylococcus pseudintermedius (MRSP) strains from different sources, and to investigate the relationship between their sequence types (STs) and SE gene patterns. The profiles of 17 SE genes in 93 MRSP strains isolated from dogs (n=43), humans (n=18) and the environment (n=32) were detected by PCR. Multilocus sequence typing (MLST), SCCmec typing and pulsed-field gel electrophoresis (PFGE) were used to analyse the clonal relatedness between the molecular type and SE gene profiles.Results/Key findings. The human MRSP strains harboured the greatest number of SE genes (12/17; sea, sec, seg, sei, sek, sel, sem, sen, seo, sep, seq and tst-1) compared to those from dogs (5/17; sec, sel, sem, seq and tst-1) and environmental sources (3/17; sec, seq and tst-1). Using MLST and PFGE, different SE gene profiles were found within the same clonal type. We show that isolates of MRSP vary in their virulence gene profiles, depending on the source from which they have been isolated. This insight should encourage the development of appropriate monitoring and mitigation strategies to reduce the transmission of MRSP in veterinary hospitals and households.

Investigation of deformation of elements of three-dimensional reinforced concrete structures located in the soil, interacting with each other through rubber gaskets

NASA Astrophysics Data System (ADS)

Berezhnoi, D. V.; Balafendieva, I. S.; Sachenkov, A. A.; Sekaeva, L. R.

2017-06-01

In work the technique of calculation of elements of three-dimensional reinforced concrete substructures located in a soil, interacting with each other through rubber linings is realized. To describe the interaction of deformable structures with the ground, special “semi-infinite” finite elements are used. A technique has been implemented that allows one to describe the contact interaction of three-dimensional structures by means of a special contact finite element with specific properties. The obtained numerical results are compared with the experimental data, their good agreement is noted.

Manufacturing processes for fabricating graphite/PMR 15 polyimide structural elements

NASA Technical Reports Server (NTRS)

Sheppard, C. H.; Hoggatt, J. T.; Symonds, W. A.

1979-01-01

Investigations were conducted to obtain commercially available graphite/PMR-15 polyimide prepreg, develop an autoclave manufacturing process, and demonstrate the process by manufacturing structural elements. Controls were established on polymer, prepreg, composite fabrication, and quality assurance, Successful material quality control and processes were demonstrated by fabricating major structural elements including flat laminates, hat sections, I beam sections, honeycomb sandwich structures, and molded graphite reinforced fittings. Successful fabrication of structural elements and simulated section of the space shuttle aft body flap shows that the graphite/PMR-15 polyimide system and the developed processes are ready for further evaluation in flight test hardware.

Injector element characterization methodology

NASA Technical Reports Server (NTRS)

Cox, George B., Jr.

1988-01-01

Characterization of liquid rocket engine injector elements is an important part of the development process for rocket engine combustion devices. Modern nonintrusive instrumentation for flow velocity and spray droplet size measurement, and automated, computer-controlled test facilities allow rapid, low-cost evaluation of injector element performance and behavior. Application of these methods in rocket engine development, paralleling their use in gas turbine engine development, will reduce rocket engine development cost and risk. The Alternate Turbopump (ATP) Hot Gas Systems (HGS) preburner injector elements were characterized using such methods, and the methodology and some of the results obtained will be shown.

Influence of alloying elements on friction and wear of copper

NASA Technical Reports Server (NTRS)

Buckley, D. H.

1972-01-01

The friction and wear characteristics were determined for copper binary alloys containing 10 atomic percent aluminum, silicon, indium, and tin. A ternary alloy containing 10 atomic percent aluminum and 5 atomic percent silicon was also examined. The effectiveness of each of the alloying elements aluminum and silicon were very effective in reducing friction. Silicon, however, also reduced wear appreciably. With lubrication, silicon, indium, and tin were all effective alloying elements in reducing friction and wear from values obtained for copper. Silicon was the most effective single element in reducing friction and wear in dry sliding and with lubrication.

Boundary element analysis of post-tensioned slabs

NASA Astrophysics Data System (ADS)

Rashed, Youssef F.

2015-06-01

In this paper, the boundary element method is applied to carry out the structural analysis of post-tensioned flat slabs. The shear-deformable plate-bending model is employed. The effect of the pre-stressing cables is taken into account via the equivalent load method. The formulation is automated using a computer program, which uses quadratic boundary elements. Verification samples are presented, and finally a practical application is analyzed where results are compared against those obtained from the finite element method. The proposed method is efficient in terms of computer storage and processing time as well as the ease in data input and modifications.

Multi-element analysis of emeralds and associated rocks by k(o) neutron activation analysis

PubMed

Acharya; Mondal; Burte; Nair; Reddy; Reddy; Reddy; Manohar

2000-12-01

Multi-element analysis was carried out in natural emeralds, their associated rocks and one sample of beryl obtained from Rajasthan, India. The concentrations of 21 elements were assayed by Instrumental Neutron Activation Analysis using the k0 method (k0 INAA method) and high-resolution gamma ray spectrometry. The data reveal the segregation of some elements from associated (trapped and host) rocks to the mineral beryl forming the gemstones. A reference rock standard of the US Geological Survey (USGS BCR-1) was also analysed as a control of the method.

Spacecraft Pointing and Position Control,

DTIC Science & Technology

1981-11-01

GEOSTATIONARY ELEMENTS As the classical set of Keplerian elements (a,e,i,a,Q, M ) is inappropriate for geosta- tionary orbits because the angular...instead of E., the set E + AE (34) - a - -LP(t 0 is obtained. Since the orbital element vector has to be computed for each measurement time, a simple orbit ...depends on the stiffness terms effected by kinematic coupling with the orbit rate 0o and the set gain K The x-component of the disturbance torque, this

The Chemical Composition of the Active Stars

NASA Astrophysics Data System (ADS)

Glazunova, L. V.

The comparison of the results of the studies of the active stars' chemical composition obtained by different authors has been performed. It was concluded that the difference between the abundances of some elements in active and inactive stars becomes significant (> 3σ) only for the active stars with high chromospheric activity (lgR'HK > -4). This is the case primarily for the light elements, namely Li, Na and Al, as well as heavy elements with Z > 30.

Rare earth element recycling from waste nickel-metal hydride batteries.

PubMed

Yang, Xiuli; Zhang, Junwei; Fang, Xihui

2014-08-30

With an increase in number of waste nickel-metal hydride batteries, and because of the importance of rare earth elements, the recycling of rare earth elements is becoming increasingly important. In this paper, we investigate the effects of temperature, hydrochloric acid concentration, and leaching time to optimize leaching conditions and determine leach kinetics. The results indicate that an increase in temperature, hydrochloric acid concentration, and leaching time enhance the leaching rate of rare earth elements. A maximum rare earth elements recovery of 95.16% was achieved at optimal leaching conditions of 70°C, solid/liquid ratio of 1:10, 20% hydrochloric acid concentration, -74μm particle size, and 100min leaching time. The experimental data were best fitted by a chemical reaction-controlled model. The activation energy was 43.98kJ/mol and the reaction order for hydrochloric acid concentration was 0.64. The kinetic equation for the leaching process was found to be: 1-(1-x)(1/3)=A/ρr0[HCl](0.64)exp-439,8008.314Tt. After leaching and filtration, by adding saturated oxalic solution to the filtrate, rare earth element oxalates were obtained. After removing impurities by adding ammonia, filtering, washing with dilute hydrochloric acid, and calcining at 810°C, a final product of 99% pure rare earth oxides was obtained. Copyright © 2014 Elsevier B.V. All rights reserved.

Quality assessment of two- and three-dimensional unstructured meshes and validation of an upwind Euler flow solver

NASA Technical Reports Server (NTRS)

Woodard, Paul R.; Yang, Henry T. Y.; Batina, John T.

1992-01-01

Quality assessment procedures are described for two-dimensional and three-dimensional unstructured meshes. The procedures include measurement of minimum angles, element aspect ratios, stretching, and element skewness. Meshes about the ONERA M6 wing and the Boeing 747 transport configuration are generated using an advancing front method grid generation package of programs. Solutions of Euler's equations for these meshes are obtained at low angle-of-attack, transonic conditions. Results for these cases, obtained as part of a validation study demonstrate the accuracy of an implicit upwind Euler solution algorithm.

Rigorous Electromagnetic Analysis of the Focusing Action of Refractive Cylindrical Microlens

NASA Astrophysics Data System (ADS)

Liu, Juan; Gu, Ben-Yuan; Dong, Bi-Zhen; Yang, Guo-Zhen

The focusing action of refractive cylindrical microlens is investigated based on the rigorous electromagnetic theory with the use of the boundary element method. The focusing behaviors of these refractive microlenses with continuous and multilevel surface-envelope are characterized in terms of total electric-field patterns, the electric-field intensity distributions on the focal plane, and their diffractive efficiencies at the focal spots. The obtained results are also compared with the ones obtained by Kirchhoff's scalar diffraction theory. The present numerical and graphical results may provide useful information for the analysis and design of refractive elements in micro-optics.

Decameter-wave radio observations of Jupiter during the 1977 apparition

NASA Technical Reports Server (NTRS)

Alexander, J. K.; Kaiser, M. L.; Thieman, J. R.; Vaughan, S. S.

1978-01-01

A catalog of observations of Jupiter's sporadic decameter wavelength radio emissions obtained with the Goddard Space Flight Center Jupiter Monitor Network between June 1977 and May 1978 is presented. Data were collected using the Goddard Space Flight Center station in Greenbelt, MD. and at facilities installed at Orroral Valley (Canberra), Australia and the Nancay Radio Observatory in France. Observations were obtained daily at frequencies of 16.7 and 22.2 MHz using five-element Yagi antennas at each end of a two-element interferometer. Plots of the two dimensional emission occurrence probability distribution are given.

Predictive capability of average Stokes polarimetry for simulation of phase multilevel elements onto LCoS devices.

PubMed

Martínez, Francisco J; Márquez, Andrés; Gallego, Sergi; Ortuño, Manuel; Francés, Jorge; Pascual, Inmaculada; Beléndez, Augusto

2015-02-20

Parallel-aligned (PA) liquid-crystal on silicon (LCoS) microdisplays are especially appealing in a wide range of spatial light modulation applications since they enable phase-only operation. Recently we proposed a novel polarimetric method, based on Stokes polarimetry, enabling the characterization of their linear retardance and the magnitude of their associated phase fluctuations or flicker, exhibited by many LCoS devices. In this work we apply the calibrated values obtained with this technique to show their capability to predict the performance of spatially varying phase multilevel elements displayed onto the PA-LCoS device. Specifically we address a series of multilevel phase blazed gratings. We analyze both their average diffraction efficiency ("static" analysis) and its associated time fluctuation ("dynamic" analysis). Two different electrical configuration files with different degrees of flicker are applied in order to evaluate the actual influence of flicker on the expected performance of the diffractive optical elements addressed. We obtain a good agreement between simulation and experiment, thus demonstrating the predictive capability of the calibration provided by the average Stokes polarimetric technique. Additionally, it is obtained that for electrical configurations with less than 30° amplitude for the flicker retardance, they may not influence the performance of the blazed gratings. In general, we demonstrate that the influence of flicker greatly diminishes when the number of quantization levels in the optical element increases.

Water-quality, bed-sediment, and biological data (October 1992 through September 1993) and statistical summaries of water-quality data (March 1985 through September 1993) for streams in the upper Clark Fork basin, Montana

USGS Publications Warehouse

Lambing, John H.

1994-01-01

Water, bed sediment, and biota were sampled in streams from Butte to below Missoula as part of a program to characterize aquatic resources in the upper Clark Fork basin of western Montana. Water-quality data were obtained periodically at 16 stations during October 1992 through September 1993 (water year 1993); daily suspended-sediment data were obtained at six of these stations. Bed-sediment and biological data were obtained at 11 stations in August 1993. Sampling stations were located on the Clark Fork and major tributaries. The primary constituents analyzed were trace elements associated with mine tailings from historic mining and smelting activities. Water-quality data include concentra- tions of major ions, trace elements, and suspended sediment in samples collected periodically during water year 1993. A statistical summary of water- quality data is provided for the period of record at each station since 1985. Daily values of streamflow, suspended-sediment concentration, and suspended-sediment discharge are given for six stations. Bed-sediment data include trace- element concentrations in the fine and bulk fractions. Biological data include trace-element concentrations in whole-body tissue of aquatic benthic insects. Quality-assurance data are reported for analytical results of water, bed sediment, and biota.

Quantitative X-ray mapping, scatter diagrams and the generation of correction maps to obtain more information about your material

NASA Astrophysics Data System (ADS)

Wuhrer, R.; Moran, K.

2014-03-01

Quantitative X-ray mapping with silicon drift detectors and multi-EDS detector systems have become an invaluable analysis technique and one of the most useful methods of X-ray microanalysis today. The time to perform an X-ray map has reduced considerably with the ability to map minor and trace elements very accurately due to the larger detector area and higher count rate detectors. Live X-ray imaging can now be performed with a significant amount of data collected in a matter of minutes. A great deal of information can be obtained from X-ray maps. This includes; elemental relationship or scatter diagram creation, elemental ratio mapping, chemical phase mapping (CPM) and quantitative X-ray maps. In obtaining quantitative x-ray maps, we are able to easily generate atomic number (Z), absorption (A), fluorescence (F), theoretical back scatter coefficient (η), and quantitative total maps from each pixel in the image. This allows us to generate an image corresponding to each factor (for each element present). These images allow the user to predict and verify where they are likely to have problems in our images, and are especially helpful to look at possible interface artefacts. The post-processing techniques to improve the quantitation of X-ray map data and the development of post processing techniques for improved characterisation are covered in this paper.

Application of the Finite Element Method to Rotary Wing Aeroelasticity

NASA Technical Reports Server (NTRS)

Straub, F. K.; Friedmann, P. P.

1982-01-01

A finite element method for the spatial discretization of the dynamic equations of equilibrium governing rotary-wing aeroelastic problems is presented. Formulation of the finite element equations is based on weighted Galerkin residuals. This Galerkin finite element method reduces algebraic manipulative labor significantly, when compared to the application of the global Galerkin method in similar problems. The coupled flap-lag aeroelastic stability boundaries of hingeless helicopter rotor blades in hover are calculated. The linearized dynamic equations are reduced to the standard eigenvalue problem from which the aeroelastic stability boundaries are obtained. The convergence properties of the Galerkin finite element method are studied numerically by refining the discretization process. Results indicate that four or five elements suffice to capture the dynamics of the blade with the same accuracy as the global Galerkin method.