Human life support during interplanetary travel and domicile. II - Generic Modular Flow Schematic modeling

NASA Technical Reports Server (NTRS)

Farral, Joseph F.; Seshan, P. K.; Rohatgi, Naresh K.

1991-01-01

This paper describes the Generic Modular Flow Schematic (GMFS) architecture capable of encompassing all functional elements of a physical/chemical life support system (LSS). The GMFS can be implemented to synthesize, model, analyze, and quantitatively compare many configurations of LSSs, from a simple, completely open-loop to a very complex closed-loop. The GMFS model is coded in ASPEN, a state-of-the-art chemical process simulation program, to accurately compute the material, heat, and power flow quantities for every stream in each of the subsystem functional elements (SFEs) in the chosen configuration of a life support system. The GMFS approach integrates the various SFEs and subsystems in a hierarchical and modular fashion facilitating rapid substitutions and reconfiguration of a life support system. The comprehensive ASPEN material and energy balance output is transferred to a systems and technology assessment spreadsheet for rigorous system analysis and trade studies.

The United States Army Medical Department Journal. July - September 2011

DTIC Science & Technology

2011-09-01

compliance. Figure 1. Functional schematic of the flow path and treatment stages of the water treatment plant. Basin 5  Basin  4  Basin  3  Basin 2...that hindered optimal performance of the WTP. They were the flocculation treatment process and flow distribution through the WTP. Flocculation...designed to simulate the WTP at a flow of 1.5 MGD (the flow through the WTP at the time of jar testing). Jar test samples were collected after

Electrokinetic Microactuator Arrays for Control of Vehicles

DTIC Science & Technology

2002-08-01

programmable logic array (PLA) content in each unit cell....................46 Chapter 4 4.1 Schematic showing electroosmotic flow induced by an...control situations involved in propulsion systems, spanning from con- trol of mixing in advanced gas turbine combustors, to active control of surge and... electroosmotic flow, shown schematically in Fig. 4.1, results when an electric field is applied to a liquid electrolyte in contact with a charged solid

Turbine Fuels from Tar Sands Bitumen and Heavy Oil. Phase I. Preliminary Process Analysis.

DTIC Science & Technology

1985-04-09

OIL RESERVOIRS OF THE UNITED STATES Resource: Oil -in-Place State Field Name (County) (Million Bbls.) Arkansas Smackover Old (Union) 1,6U0 California...Flow Schematic for Gas Oil Feed Hydrotreater 94 14 Summary of Case Studies for Processing Bitumen from New Mexico 95 15 Summary of Case Studies for...Naphtha Hydrotreating Process Estimates 112 14 Gas Oil Hydrocracking Process Estimates 113 l! Gas Oil Hydrotreating Process Estimate 114 16 Fluid

Gender Schematic Development within the Family Context.

ERIC Educational Resources Information Center

Sokal, Laura; Seifert, Kelvin; Piotrowski, Caroline

Organizing the world into masculine and feminine categories is a process called "gender schematicity." High gender schematicity has been linked with children's inclination to self-select out of certain learning opportunities that they deem gender-inappropriate. This study examined gender schematicity among kindergartners and…

(abstract) Generic Modeling of a Life Support System for Process Technology Comparisons

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support systems and process technology options for a Lunar Base and a Mars Exploration Mission.

The Effect of Functional Flow Diagrams on the Technical System Understanding of Apprentice Aircraft Maintenance Mechanics.

ERIC Educational Resources Information Center

Johnson, Scott D.; Satchwell, Richard E.

A quasiexperimental study involved 18 male students enrolled in an aircraft systems course at the University of Illinois. The control group of 10 students studied 39 schematic diagrams of aircraft systems. The treatment group of eight students studied the same schematic diagrams plus conceptual diagrams of the systems. Otherwise, the instruction…

Integrating Lean Exploration Loops Into Healthcare Facility Design.

PubMed

Johnson, Kendra; M Mazur, Lukasz; Chadwick, Janet; Pooya, Pegah; Amos, Alison; McCreery, John

2017-04-01

To explore how Lean can add value during the schematic phase of design through providing additional resources and support to project leadership and the architectural design team. This case study-based research took place at one large academic hospital during design efforts of surgical tower to house 19 operating rooms (ORs) and support spaces including pre- and post-op, central processing and distribution, and materials management. Surgical services project leadership asked for Lean practitioners' support during the design process. Lean Exploration Loops (LELs) were conducted to generate evidence to support stakeholders, as they made important decisions about the new building design. The analyses conducted during LELs during the schematic phase were primarily conducted using express workouts (EWOs) and were focused on the flow of patients, staff, and family throughout the pavilion. LELs resulted in recommendations for key design features (e.g., number of pre- and post-op bays per OR floor, location of doors, scrub sinks, stretcher alcoves, equipment storage, and sterile core areas). Two-sided pre- and post-op bays with an inner clinical workspace and an outer patient transport corridor were recommended. Communicating elevator and a centrally located stairwell for staff to alleviate stress on the main bank of elevators at peak usage times were also suggested. We found Lean tools and methods to be of most value during schematic phase when focused on detailed process and layout analysis, while acknowledging the usefulness of focused EWOs to generate the evidence needed for the decision-making.

Sensitivity Analysis of Algan/GAN High Electron Mobility Transistors to Process Variation

DTIC Science & Technology

2008-02-01

delivery system gas panel including both hydride and alkyl delivery modules and the vent/valve configurations [14...Reactor Gas Delivery Systems A basic schematic diagram of an MOCVD reactor delivery gas panel is shown in Figure 13. The reactor gas delivery...system, or gas panel , consists of a network of stainless steel tubing, automatic valves and electronic mass flow controllers (MFC). There are separate

Using Functional Flow Diagrams to Enhance Technical Systems Understanding.

ERIC Educational Resources Information Center

Satchwell, Richard E.

1997-01-01

A treatment group of 20 aviation students used training manuals that presented functional flow diagrams before schematic diagrams. Comparison of data from 10 controls on a card-sort task showed that functional flow diagrams enhanced understanding of technical systems. (SK)

Introduction to Design and Analysis of High Speed Pumps

DTIC Science & Technology

2006-11-01

for public release, distribution unlimited 13 . SUPPLEMENTARY NOTES See also ADM002051., The original document contains color images. 14. ABSTRACT 15...fluctuations in the pump and the installation, vibration and noise). Figure ( 13 ) presents schematically, for a meridional section in a radial flow pump...impeller. Figure (14) illustrates what can be observed in different types of pumps when recirculation is present. Figure 13 : Schematic Illustration

Schematic driven silicon photonics design

NASA Astrophysics Data System (ADS)

Chrostowski, Lukas; Lu, Zeqin; Flückiger, Jonas; Pond, James; Klein, Jackson; Wang, Xu; Li, Sarah; Tai, Wei; Hsu, En Yao; Kim, Chan; Ferguson, John; Cone, Chris

2016-03-01

Electronic circuit designers commonly start their design process with a schematic, namely an abstract representation of the physical circuit. In integrated photonics on the other hand, it is very common for the design to begin at the physical component level. In order to build large integrated photonic systems, it is crucial to design using a schematic-driven approach. This includes simulations based on schematics, schematic-driven layout, layout versus schematic verification, and post-layout simulations. This paper describes such a design framework implemented using Mentor Graphics and Lumerical Solutions design tools. In addition, we describe challenges in silicon photonics related to manufacturing, and how these can be taken into account in simulations and how these impact circuit performance.

Computations of Chaotic Flows in Micromixers

DTIC Science & Technology

2005-01-01

2005 2. REPORT TYPE 3. DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Computations of Chaotic Flows in Micromixers 5a. CONTRACT...Std Z39-18 215simulation, computing, and modeling 2005 NRL Review Computations of Chaotic Flows In Micromixers FIGURE 6 Schematic of staggered

40 CFR 60.697 - Recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... be kept. (i) Detailed schematics, and piping and instrumentation diagrams. (ii) The dates and... flow and volatile organic compound content under varying liquid level conditions (dynamic and static... vent stream composition, constituent concentrations, flow rate, relative humidity, and temperature. The...

40 CFR 60.697 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... specifications shall be kept. (i) Detailed schematics, and piping and instrumentation diagrams. (ii) The dates..., including flow and volatile organic compound content under varying liquid level conditions (dynamic and... vent stream composition, constituent concentrations, flow rate, relative humidity, and temperature. The...

40 CFR 60.697 - Recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... be kept. (i) Detailed schematics, and piping and instrumentation diagrams. (ii) The dates and... flow and volatile organic compound content under varying liquid level conditions (dynamic and static... vent stream composition, constituent concentrations, flow rate, relative humidity, and temperature. The...

Pendeo-Epitaxy Process Optimization of GaN for Novel Devices Applications

DTIC Science & Technology

2008-04-01

uses the metal organic chemical vapor deposition (MOCVD) technique that commonly requires ammonia (NH3) and trimethyl gallium ( TMG ) as precursors...GaN are the growth temperature, the ammonia to TMG flow rate ratio (V:III ratio), the chamber pressure and the time to coalescence (Nam et al., 1998...1100, and (d) 1120 oC. (e) A schematic of the side wall crystallography at different growth temperatures. It is known that the ammonia to TMG

Reducing Electroosmotic Flow Enables DNA Separations in Ultrathin Channels.

DTIC Science & Technology

1998-08-01

Chemical structure of DNA bases 2 Figure 1-2: Schematic diagram of DNA base pairing 5 Figure 1-3: Schematic diagram of the capillary and the...hydrogen atoms near one of the Figure 1-1: A. Chemical structure of the DNA backbone. B. Chemical structure of DNA bases . The DNA backbone consists...of pentose sugar (deoxyribose) held together by phosphodiester bonds. The DNA bases that are derivatives of purine are adenine (A) and guanine (G

Generic Modeling of a Life Support System for Process Technology Comparison

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support system and process technology options for a Lunar Base with a crew size of 4 and mission lengths of 90 and 600 days. System configurations to minimize the life support system weight and power are explored.

Microcalorimetric Study of the Aging Reactions of Atomized Magnesium Powder

DTIC Science & Technology

1992-02-20

Cutaway View of the Thermometrics /LKB Model 2277 Microcalorimeter . ............ . 3 Figure 2. Schematic Diagram of the Gas Flow Ampoule System...approximately 3.5-4.0 grams) were used to simulate degradation in a non-airtight containerized storage environment. EXPERIMEN4TAL A Thermometrics /LKB Model...View of the Thermometrics /LUB Model 2277 Microcalorimeter V CAAV1Za QA3 1J4LR AT T,. Fge.chao the Gs Flowi I II - I I Apu I I ! Figure 2. Schematic

Living in the Real World: So You Want to Build a Building? Dancing with Architects and Other Developmental Experiences--Part 3: Designing the Building.

ERIC Educational Resources Information Center

Greenman, Jim

1992-01-01

The process of designing a child care center is described. This process includes the conceptual and schematic design, schematic pricing, design development, and construction documents. Overall design criteria, and interior program components, are discussed. (LB)

40 CFR 264.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

...., temperatures, flow rates, or vent stream organic compounds and concentrations) that represent the conditions... the estimated or design flow rate and organic content of each vent stream and define the acceptable..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

40 CFR 264.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

...., temperatures, flow rates, or vent stream organic compounds and concentrations) that represent the conditions... the estimated or design flow rate and organic content of each vent stream and define the acceptable..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

40 CFR 264.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

...., temperatures, flow rates, or vent stream organic compounds and concentrations) that represent the conditions... the estimated or design flow rate and organic content of each vent stream and define the acceptable..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

40 CFR 265.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

...., temperatures, flow rates or vent stream organic compounds and concentrations) that represent the conditions... -include the estimated or design flow rate and organic content of each vent stream and define the..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

40 CFR 265.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

...., temperatures, flow rates or vent stream organic compounds and concentrations) that represent the conditions... -include the estimated or design flow rate and organic content of each vent stream and define the..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

40 CFR 264.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

...., temperatures, flow rates, or vent stream organic compounds and concentrations) that represent the conditions... the estimated or design flow rate and organic content of each vent stream and define the acceptable..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

40 CFR 265.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

...., temperatures, flow rates or vent stream organic compounds and concentrations) that represent the conditions... -include the estimated or design flow rate and organic content of each vent stream and define the..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

40 CFR 265.1035 - Recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

...., temperatures, flow rates or vent stream organic compounds and concentrations) that represent the conditions... -include the estimated or design flow rate and organic content of each vent stream and define the..., drawings, schematics, and piping and instrumentation diagrams based on the appropriate sections of “APTI...

Event-related potentials when identifying or color-naming threatening schematic stimuli in spider phobic and non-phobic individuals

PubMed Central

Kolassa, Iris-Tatjana; Musial, Frauke; Kolassa, Stephan; Miltner, Wolfgang HR

2006-01-01

Background Previous studies revealed increased parietal late positive potentials (LPPs) in response to spider pictures in spider phobic individuals. This study searched for basic features of fear-relevant stimuli by investigating whether schematic spider images are sufficient to evoke differential behavioral as well as differential early and late ERP responses in spider phobic, social phobic (as a clinical control group), and non-phobic control participants. Methods Behavioral and electrophysiological correlates of the processing of schematic spider and flower images were investigated while participants performed a color (emotional Stroop) and an object identification task. Stimuli were schematic pictures of spiders and flowers matched with respect to constituting visual elements. Results Consistent with previous studies using photographic spider pictures, spider phobic persons showed enhanced LPPs when identifying schematic spiders compared to schematic flowers. In addition, spider phobic individuals showed generally faster responses than the control groups. This effect was interpreted as evidence for an increased general behavioral hypervigilance in this anxiety disorder group. Furthermore, both phobic groups showed enhanced P100 amplitudes compared to controls, which was interpreted as evidence for an increased (cortical) hypervigilance for incoming stimuli in phobic patients in general. Finally, all groups showed faster identification of and larger N170 amplitudes in response to schematic spider than flower pictures. This may reflect either a general advantage for fear-relevant compared to neutral stimuli, or might be due to a higher level of expertise in processing schematic spiders as compared to the more artificially looking flower stimuli. Conclusion Results suggest that schematic spiders are sufficient to prompt differential responses in spider-fearful and spider-non-fearful persons in late ERP components. Early ERP components, on the other hand, seem to be modified by anxiety status per se, which is consistent with recent theories on general hypervigilance in the anxiety disorder spectrum. PMID:16981991

Event-related potentials when identifying or color-naming threatening schematic stimuli in spider phobic and non-phobic individuals.

PubMed

Kolassa, Iris-Tatjana; Musial, Frauke; Kolassa, Stephan; Miltner, Wolfgang H R

2006-09-18

Previous studies revealed increased parietal late positive potentials (LPPs) in response to spider pictures in spider phobic individuals. This study searched for basic features of fear-relevant stimuli by investigating whether schematic spider images are sufficient to evoke differential behavioral as well as differential early and late ERP responses in spider phobic, social phobic (as a clinical control group), and non-phobic control participants. Behavioral and electrophysiological correlates of the processing of schematic spider and flower images were investigated while participants performed a color (emotional Stroop) and an object identification task. Stimuli were schematic pictures of spiders and flowers matched with respect to constituting visual elements. Consistent with previous studies using photographic spider pictures, spider phobic persons showed enhanced LPPs when identifying schematic spiders compared to schematic flowers. In addition, spider phobic individuals showed generally faster responses than the control groups. This effect was interpreted as evidence for an increased general behavioral hypervigilance in this anxiety disorder group. Furthermore, both phobic groups showed enhanced P100 amplitudes compared to controls, which was interpreted as evidence for an increased (cortical) hypervigilance for incoming stimuli in phobic patients in general. Finally, all groups showed faster identification of and larger N170 amplitudes in response to schematic spider than flower pictures. This may reflect either a general advantage for fear-relevant compared to neutral stimuli, or might be due to a higher level of expertise in processing schematic spiders as compared to the more artificially looking flower stimuli. Results suggest that schematic spiders are sufficient to prompt differential responses in spider-fearful and spider-non-fearful persons in late ERP components. Early ERP components, on the other hand, seem to be modified by anxiety status per se, which is consistent with recent theories on general hypervigilance in the anxiety disorder spectrum.

What’s the Gist? The influence of schemas on the neural correlates underlying true and false memories

PubMed Central

Webb, Christina E.; Turney, Indira C.; Dennis, Nancy A.

2017-01-01

The current study used a novel scene paradigm to investigate the role of encoding schemas on memory. Specifically, the study examined the influence of a strong encoding schema on retrieval of both schematic and non-schematic information, as well as false memories for information associated with the schema. Additionally, the separate roles of recollection and familiarity in both veridical and false memory retrieval were examined. The study identified several novel results. First, while many common neural regions mediated both schematic and non-schematic retrieval success, schematic recollection exhibited greater activation in visual cortex and hippocampus, regions commonly shown to mediate detailed retrieval. More effortful cognitive control regions in the prefrontal and parietal cortices, on the other hand, supported non-schematic recollection, while lateral temporal cortices supported familiarity-based retrieval of non-schematic items. Second, both true and false recollection, as well as familiarity, were mediated by activity in left middle temporal gyrus, a region associated with semantic processing and retrieval of schematic gist. Moreover, activity in this region was greater for both false recollection and false familiarity, suggesting a greater reliance on lateral temporal cortices for retrieval of illusory memories, irrespective of memory strength. Consistent with previous false memory studies, visual cortex showed increased activity for true compared to false recollection, suggesting that visual cortices are critical for distinguishing between previously viewed targets and related lures at retrieval. Additionally, the absence of common visual activity between true and false retrieval suggests that, unlike previous studies utilizing visual stimuli, when false memories are predicated on schematic gist and not perceptual overlap, there is little reliance on visual processes during false memory retrieval. Finally, the medial temporal lobe exhibited an interesting dissociation, showing greater activity for true compared to false recollection, as well as for false compared to true familiarity. These results provided an indication as to how different types of items are retrieved when studied within a highly schematic context. Results both replicate and extend previous true and false memory findings, supporting the Fuzzy Trace Theory. PMID:27697593

What's the gist? The influence of schemas on the neural correlates underlying true and false memories.

PubMed

Webb, Christina E; Turney, Indira C; Dennis, Nancy A

2016-12-01

The current study used a novel scene paradigm to investigate the role of encoding schemas on memory. Specifically, the study examined the influence of a strong encoding schema on retrieval of both schematic and non-schematic information, as well as false memories for information associated with the schema. Additionally, the separate roles of recollection and familiarity in both veridical and false memory retrieval were examined. The study identified several novel results. First, while many common neural regions mediated both schematic and non-schematic retrieval success, schematic recollection exhibited greater activation in visual cortex and hippocampus, regions commonly shown to mediate detailed retrieval. More effortful cognitive control regions in the prefrontal and parietal cortices, on the other hand, supported non-schematic recollection, while lateral temporal cortices supported familiarity-based retrieval of non-schematic items. Second, both true and false recollection, as well as familiarity, were mediated by activity in left middle temporal gyrus, a region associated with semantic processing and retrieval of schematic gist. Moreover, activity in this region was greater for both false recollection and false familiarity, suggesting a greater reliance on lateral temporal cortices for retrieval of illusory memories, irrespective of memory strength. Consistent with previous false memory studies, visual cortex showed increased activity for true compared to false recollection, suggesting that visual cortices are critical for distinguishing between previously viewed targets and related lures at retrieval. Additionally, the absence of common visual activity between true and false retrieval suggests that, unlike previous studies utilizing visual stimuli, when false memories are predicated on schematic gist and not perceptual overlap, there is little reliance on visual processes during false memory retrieval. Finally, the medial temporal lobe exhibited an interesting dissociation, showing greater activity for true compared to false recollection, as well as for false compared to true familiarity. These results provided an indication as to how different types of items are retrieved when studied within a highly schematic context. Results both replicate and extend previous true and false memory findings, supporting the Fuzzy Trace Theory. Copyright © 2016 Elsevier Ltd. All rights reserved.

Schematization and Sentence Processing by Foreign Language Learners: A Reading-Time Experiment and a Stimulated-Recall Analysis

ERIC Educational Resources Information Center

Tode, Tomoko

2012-01-01

This article examines how learners of English as a foreign language process reduced relative clauses (RRCs) from the perspective of usage-based language learning, which posits that language knowledge forms a hierarchy from item-based knowledge consisting only of entrenched frequent exemplars to more advanced schematized knowledge. Twenty-eight…

Visualization of Buried Marte Vallis Channels

NASA Image and Video Library

2013-03-07

This illustration schematically shows where the Shallow Radar instrument on NASA Mars Reconnaissance Orbiter detected flood channels that had been buried by lava flows in the Elysium Planitia region of Mars.

Ultrahigh-Strength Magnesium Alloys for the Future Force: A Final Report on the 5-Year Mission Program, 2009-2013

DTIC Science & Technology

2014-01-01

discoloration of the deposit once it was outside the direct line of the spray nozzle and the flow of inert carrier gas . This oxidation is very likely to be a...24 Figure 23. Schematic of the active liquid nitrogen cooling plate used in an attempt to minimize grain growth that occurs during processing... gas temperature of (A) 200 °C, (B) 250 °C, (C) 300 °C, (D) 350 °C, and (E) 400 °C. .................29 Figure 28. Representative micrographs for cold

Qualification of the T2 wind tunnel in cryogenic operation. A: Thermal field, preliminary study of a schematic model

NASA Technical Reports Server (NTRS)

Dor, J. B.; Mignosi, A.; Plazanet, M.

1984-01-01

The T2 wind tunnel is described. The process of generating a cyrogenic gust using the example of a test made at very low temperature is presented. Detailed results of tests on temperatures for flow in the settling chamber, the interior walls of the system, and the metal casing are given. The transverse temperature distribution in the settling chamber and working section, and of the thermal gradients in the walls, are given as a function of the temperature level of the test.

The Effect of Conceptual Diagrams on Aviation Mechanics' Technical Systems Understanding.

ERIC Educational Resources Information Center

Satchwell, Richard E.; Johnson, Scott D.

A quasi-experimental study explored the effect of functional flow diagrams on technical system understanding. An individualized field training package which contained schematic diagrams that illustrated an aircraft's electrical system was complimented with functional flow diagrams. In a 4-week treatment, a control group of 10 students enrolled in…

Exploring Verbal, Visual and Schematic Learners' Static and Dynamic Mental Images of Scientific Species and Processes in Relation to Their Spatial Ability

ERIC Educational Resources Information Center

Al-Balushi, Sulaiman M.; Coll, Richard Kevin

2013-01-01

The current study compared different learners' static and dynamic mental images of unseen scientific species and processes in relation to their spatial ability. Learners were classified into verbal, visual and schematic. Dynamic images were classified into: appearing/disappearing, linear-movement, and rotation. Two types of scientific entities and…

Environmental Control Systems

NASA Technical Reports Server (NTRS)

Rosenbush, F. M.

1982-01-01

Materials illustrating a presentation on environment control systems for electric flight systems are presented. Schematics and flow diagrams of fresh air source and air conditioning systems, and vapor cycle and air cycle parts lists are presented.

30 CFR 250.292 - What must the DWOP contain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... description and schematic of the typical wellbore, casing, and completion; (b) Structural design, fabrication... systems that constitute all or part of a single project development covered by the DWOP; (j) Flow...

The Effects of Sampling Probe Design and Sampling Techniques on Aerosol Measurements

DTIC Science & Technology

1975-05-01

Schematic of Extraction and Sampling System 39 16. Filter Housing 40 17. Theoretical Isokinetic Flow Requirements of the EPA Sampling...from the flow parameters based on a zero-error assumption at isokinetic sampling conditions. Isokinetic , or equal velocity sampling, was...prior to testing the probes. It was also used to measure the flow field adjacent to the probe inlets to determine the isokinetic condition of the

An Electroacoustic Hearing Protector Simulator That Accurately Predicts Pressure Levels in the Ear Based on Standard Performance Metrics

DTIC Science & Technology

2013-08-01

earplug and earmuff showing HPD simulator elements for energy flow paths...unprotected or protected ear traditionally start with analysis of energy flow through schematic diagrams based on electroacoustic (EA) analogies between...Schröter, 1983; Schröter and Pösselt, 1986; Shaw and Thiessen, 1958, 1962; Zwislocki, 1957). The analysis method tracks energy flow through fluid and

Geothermal Systems for School.

ERIC Educational Resources Information Center

Dinse, David H.

1998-01-01

Describes an award-winning school heating and cooling system in which two energy-efficient technologies, variable-flow pumping and geothermal heat pumps, were combined. The basic system schematic and annual energy use and cost savings statistics are provided. (GR)

Printed Circuit Board Design (PCB) with HDL Designer

NASA Technical Reports Server (NTRS)

Winkert, Thomas K.; LaFourcade, Teresa

2004-01-01

Contents include the following: PCB design with HDL designer, design process and schematic capture - symbols and diagrams: 1. Motivation: time savings, money savings, simplicity. 2. Approach: use single tool PCB for FPGA design, more FPGA designs than PCB designers. 3. Use HDL designer for schematic capture.

Summary of the ultrafiltration, reverse osmosis, and adsorbents project

NASA Astrophysics Data System (ADS)

Colvin, C. M.; Roberts, R. C.; Williams, M. K.

1983-01-01

The design for a medium size (40 gal/min) ultrafiltration (UF) membrane unit includes a schematic diagram, capital and operating costs, a list and discussion of the radioisotopes tested and the results achieved, operating parameters, and characteristics of the available membrane configurations. The plant design for a reverse osmosis (RO) membrane unit includes a conceptual diagram, specifications for a RO unit producing 40 gal/min of permeated product, a list of radioisotopes tested on RO units and the rejections achieved, a discussion of the principal of RO, a discussion of the upper limits of cation and anion concentrations (there are no lower limits), a discussion of membrane configurations and porosities, a discussion of factors affecting membranes, a section on calculating the membrane area needed for a particular application, and capital and operating cost calculations. The design for an ion exchange pilot plant includes a schematic diagram; flow, resin, and column specifications; impurity limits; and operating and capital costs. A short theoretical discussion and process description are also included. The design retains flexibility so that application to a specific stream can be determined.

Health-Promoting School Indicators: Schematic Models from Students

ERIC Educational Resources Information Center

Gabhainn, Saoirse Nic; Sixsmith, Jane; Delaney, Ellen-Nora; Moore, Miriam; Inchley, Jo; O'Higgins, Siobhan

2007-01-01

Purpose: The purpose of this paper is to outline a three-stage process for engaging with students to develop school level indicators of health in sequential class groups students first generated, then categorised indicators and finally developed schematic representations of their analyses. There is a political and practical need to develop…

Human life support during interplanetary travel and domicile. IV - Mars expedition technology trade study

NASA Technical Reports Server (NTRS)

Rohatgi, Naresh K.; Ferrall, Joseph F.; Seshan, P. K.

1991-01-01

Results of trading processing technologies in a closed-loop configuration, in terms of power and weight for the Mars Expedition Mission, are presented. The technologies were traded and compared to a baseline set for functional elements that include CO2 removal, H2O electrolysis, potable H2O cleanup, and hygiene H2O cleanup. These technologies were selected from those being considered for Space Station Freedom and represent only chemical/physical technologies. Attention is given to the technology trade calculation scheme, technology data and selection, the generic modular flow schematic, and life support system specifications.

Interpretative bias in spider phobia: Perception and information processing of ambiguous schematic stimuli.

PubMed

Haberkamp, Anke; Schmidt, Filipp

2015-09-01

This study investigates the interpretative bias in spider phobia with respect to rapid visuomotor processing. We compared perception, evaluation, and visuomotor processing of ambiguous schematic stimuli between spider-fearful and control participants. Stimuli were produced by gradually morphing schematic flowers into spiders. Participants rated these stimuli related to their perceptual appearance and to their feelings of valence, disgust, and arousal. Also, they responded to the same stimuli within a response priming paradigm that measures rapid motor activation. Spider-fearful individuals showed an interpretative bias (i.e., ambiguous stimuli were perceived as more similar to spiders) and rated spider-like stimuli as more unpleasant, disgusting, and arousing. However, we observed no differences between spider-fearful and control participants in priming effects for ambiguous stimuli. For non-ambiguous stimuli, we observed a similar enhancement for phobic pictures as has been reported previously for natural images. We discuss our findings with respect to the visual representation of morphed stimuli and to perceptual learning processes. Copyright © 2015 Elsevier B.V. All rights reserved.

Controllable growth of shaped graphene domains by atmospheric pressure chemical vapour deposition

NASA Astrophysics Data System (ADS)

Fan, Lili; Li, Zhen; Li, Xiao; Wang, Kunlin; Zhong, Minlin; Wei, Jinquan; Wu, Dehai; Zhu, Hongwei

2011-12-01

Graphene domains in different shapes have been grown on copper substrates via atmospheric pressure chemical vapour deposition by controlling the growth process parameters. Under stabilized conditions, graphene domains tend to be six-fold symmetric hexagons under low flow rate methane with some domains in an irregular hexagonal shape. After further varying the growth duration, methane flow rate, and temperature, graphene domains have developed shapes from hexagon to shovel and dendrite. Two connecting modes, through overlap and merging of adjacent graphene domains, are proposed.Graphene domains in different shapes have been grown on copper substrates via atmospheric pressure chemical vapour deposition by controlling the growth process parameters. Under stabilized conditions, graphene domains tend to be six-fold symmetric hexagons under low flow rate methane with some domains in an irregular hexagonal shape. After further varying the growth duration, methane flow rate, and temperature, graphene domains have developed shapes from hexagon to shovel and dendrite. Two connecting modes, through overlap and merging of adjacent graphene domains, are proposed. Electronic supplementary information (ESI) available: Schematics of CVD setups for graphene growth, Raman spectra and SEM images. See DOI: 10.1039/c1nr11480h

Treatment of Chlorinated Aliphatic Contamination of Groundwater by Horizontal Recirculation Wells and by Constructed Vertical Flow Wetlands

DTIC Science & Technology

2002-03-01

groundwater laden with contaminants. Once the contaminated water is at the surface, it must be treated for contaminant destruction, generally by...treatment walls only work under very specific hydrogeologic conditions (relatively shallow water table, no seasonal fluctuations in groundwater flow...GCWs Elevation Schematic Water Table Contaminated Groundwater Contaminated Groundwater Treated Groundwater Treated Groundwater Reactive Porous Medium

Materials Research for Advanced Inertial Instrumentation; Task 3: Rare Earth Magnetic Material Technology as Related to Gyro Torquers and Motors.

DTIC Science & Technology

1981-12-01

POWDER FEED S PRAY STREAM POWER INPUT - COOLING GAS I WATER DEPOSIT SUBSTRATEI 10/77 12404 REV A 1/78 Figure 13. Schematic sketch of spray process .( 14...as-HIPed condition ...... 26 13 Schematic sketch of spray process ........... ........ 3 14 X-ray diffraction patterns on deposits formed from (A) 42.0...Br values to be low. When the alloy powder is magnetically aligned and cold isostatically compacted followed by densificaton by lIPing, there is

US/CIS integrated NTRE

NASA Astrophysics Data System (ADS)

Bulman, M. J.; Culver, D. W.; McIlwain, M. C.; Rochow, Richard; D'Yakov, E. K.; Smetannikov, V. P.

1993-06-01

The paper describes the Nuclear Thermal Energy (NTRE) engine, developed by taking advantage of mature fuel technology developed in the former Soviet Union, thus shortening the development schedule of this engine for moon and Mars explorations. The near-term NTRE engine has a number of features that provide safety, mission performance, cost, and risk benefits. These include: (1) high-temperature long-life CIS fuel, (2) high-pressure recuperated expander cycle, (3) assured restart, (4) long-life cooled nozzle with thin inner wall, (5) long-life turbopumps, (6) heat radiation and electrical power generation, and (7) component integration synergy. Diagrams of the reactor core, the recuperated bottoming cycle flow schematic, and the recuperated bottoming cycle engine schematic are presented.

Study of the Effects of Centrifugal Instabilities on Flow in a 40 to 1 Aspect Ratio Rectangular Curved Channel, for Dean Numbers from 35 to Fully Turbulent Conditions

DTIC Science & Technology

1990-12-01

is constructed from stainless steel hypodermic tubing with inner and outer diameters of 0.203 mm and 0.406 mm. The five tubes were first joined by...for all channels is 256 kHz. A schematic diagram of the measurement process [Ref. 25] is given in Figure 78, and is also described below. The analog...and smoke rake. Combustion takes place inside a 40.64 cm long, 6.27 cm inside diameter (2.5 inch schedule 40) steel pipe. Inside this chamber, smoke is

Compatibility Assessment Tool

NASA Technical Reports Server (NTRS)

Egbert, James Allen

2016-01-01

In support of ground system development for the Space Launch System (SLS), engineers are tasked with building immense engineering models of extreme complexity. The various systems require rigorous analysis of pneumatics, hydraulic, cryogenic, and hypergolic systems. There are certain standards that each of these systems must meet, in the form of pressure vessel system (PVS) certification reports. These reports can be hundreds of pages long, and require many hours to compile. Traditionally, each component is analyzed individually, often utilizing hand calculations in the design process. The objective of this opportunity is to perform these analyses in an integrated fashion with the parametric CADCAE environment. This allows for systems to be analyzed on an assembly level in a semi-automated fashion, which greatly improves accuracy and efficiency. To accomplish this, component specific parameters were stored in the Windchill database to individual Creo Parametric models based on spec control drawings. These parameters were then accessed by using the Prime Analysis within Creo Parametric. MathCAD Prime spreadsheets were created that automatically extracted these parameters, performed calculations, and generated reports. The reports described component compatibility based on local conditions such as pressure, temperature, density, and flow rates. The reports also determined component pairing compatibility, such as properly sizing relief valves with regulators. The reports stored the input conditions that were used to determine compatibility to increase traceability of component selection. The desired workflow for using this tool would begin with a Creo Schematics diagram of a PVS system. This schematic would store local conditions and locations of components. The schematic would then populate an assembly within Creo Parametric, using Windchill database parts. These parts would have their attributes already assigned, and the MathCAD spreadsheets could begin running through database parts to determine which components would be suited for specific locations within the assembly. This eliminates a significant amount of time from the design process, and makes initial analysis assessments more accurate. Each component that would be checked for a location within the assembly would generate a report, showing whether the component was compatible. These reports could be used to generate the PVS report without the need to perform the same analysis multiple times. This process also has the potential to be expanded upon to further automate PVS reports. The integration of software codes or macros could be used to automatically check through hundreds of parts for each location on the schematic. If the software could recognize which type of component would be necessary for each location, it is possible that simply starting the macro could completely choose all the components needed for the schematic, and in turn the system. This would save many hours of work initially selecting components, which could end up saving money. Overall, this process helps to automate initial component selections for PVS systems to fit local design specifications. These selections will automatically generate reports showing how the design criteria are met by the specific component that was chosen. These reports will contribute to easier compilation of the PVS certification reports, which currently take a great amount of time and effort to produce.

Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study. Volume 3: Engine data summary

NASA Technical Reports Server (NTRS)

1981-01-01

The engine operating characteristics were examined. Inlet pressure effects, tank pressurization effects, steady-state specific impulse, and the steady-state cycle were studied. The propellant flow schematic and operating sequence are presented. Engine hardware drawings are included.

Impact of Schematic Designs on the Cognition of Underground Tube Maps

NASA Astrophysics Data System (ADS)

Liu, Zheng; Li, Zhilin

2016-06-01

Schematic maps have been popularly employed to represent transport networks, particularly underground tube lines (or metro lines), since its adoption by the Official London Underground in early 1930s. Such maps employ straightened lines along horizontal, vertical and diagonal directions. Recently, some researchers started to argue that the distortion in such a schematization may cause big distortion and some new designs are proposed. This project aims to make a comparative analysis of such a schematic design with a new design proposed by Mark Noad in 2011, which makes use of lines along 30º and 60º directions instead of the 45º direction. Tasks have been designed for evaluating the effect of schematic designs on route planning by travellers. The participant was asked to choose the route s/he would take among two or three possible route options and then read the name of the selected transfer station. Eye-tracking technique has been employed to track the map recognition process. Total travel time is used as criterion for effectiveness; completion time and mental work cost are used for efficiency evaluation. It has been found that (1) the design of map style has significant impact on users' travel decision making, especially map distance and transfer station symbol designs, and (2) the design style of a schematic map will have great impact on the effectiveness and efficiency of map recognition.

Chemical Weapons Treaty Technologies Reference Collection - 1997 Supplement

DTIC Science & Technology

1999-11-01

INFRARED SPECTROSCOPY (FTIR). EDGEWOOD...102034 CB-102751 CB-102954 CB-103165 FIRST REVIEW CONFERENCE CB-103294 FLOW SCHEMATICS CB-103106 FOURIER TRANSFORM INFRARED SPECTROSCOPY CB... INFRARED SPECTROSCOPY CB-100365 CB-101343 CB-102248 CB-102715 CB-102759 CB-102768 CB-102805 CB-102880 INFRARED SPECTROSCOPY (Continued)

Water Treatment Pilot Plant Design Manual: Low Flow Conventional/Direct Filtration Water Treatment Plant for Drinking Water Treatment Studies

EPA Science Inventory

This manual highlights the project constraints and concerns, and includes detailed design calculations and system schematics. The plant is based on engineering design principles and practices, previous pilot plant design experiences, and professional experiences and may serve as ...

Analytical Studies of the Lift and Roll Stability of a Ram Air Cushion Vehicle

DOT National Transportation Integrated Search

1972-12-01

A ram air cushion vehicle (a type of ram wing) is described schematically and compared with a conventional air cushion vehicle design. The nonlinear equations for the flow in the cushion region are derived. A review is made of the most recent literat...

Education Catching Up with Science: Preparing Students for Three-Dimensional Literacy in Cell Biology

PubMed Central

Kramer, IJsbrand M.; Dahmani, Hassen-Reda; Delouche, Pamina; Bidabe, Marissa; Schneeberger, Patricia

2012-01-01

The large number of experimentally determined molecular structures has led to the development of a new semiotic system in the life sciences, with increasing use of accurate molecular representations. To determine how this change impacts students’ learning, we incorporated image tests into our introductory cell biology course. Groups of students used a single text dealing with signal transduction, which was supplemented with images made in one of three iconographic styles. Typically, we employed realistic renderings, using computer-generated Protein Data Bank (PDB) structures; realistic-schematic renderings, using shapes inspired by PDB structures; or schematic renderings, using simple geometric shapes to represent cellular components. The control group received a list of keywords. When students were asked to draw and describe the process in their own style and to reply to multiple-choice questions, the three iconographic approaches equally improved the overall outcome of the tests (relative to keywords). Students found the three approaches equally useful but, when asked to select a preferred style, they largely favored a realistic-schematic style. When students were asked to annotate “raw” realistic images, both keywords and schematic representations failed to prepare them for this task. We conclude that supplementary images facilitate the comprehension process and despite their visual clutter, realistic representations do not hinder learning in an introductory course. PMID:23222839

Education catching up with science: preparing students for three-dimensional literacy in cell biology.

PubMed

Kramer, Ijsbrand M; Dahmani, Hassen-Reda; Delouche, Pamina; Bidabe, Marissa; Schneeberger, Patricia

2012-01-01

The large number of experimentally determined molecular structures has led to the development of a new semiotic system in the life sciences, with increasing use of accurate molecular representations. To determine how this change impacts students' learning, we incorporated image tests into our introductory cell biology course. Groups of students used a single text dealing with signal transduction, which was supplemented with images made in one of three iconographic styles. Typically, we employed realistic renderings, using computer-generated Protein Data Bank (PDB) structures; realistic-schematic renderings, using shapes inspired by PDB structures; or schematic renderings, using simple geometric shapes to represent cellular components. The control group received a list of keywords. When students were asked to draw and describe the process in their own style and to reply to multiple-choice questions, the three iconographic approaches equally improved the overall outcome of the tests (relative to keywords). Students found the three approaches equally useful but, when asked to select a preferred style, they largely favored a realistic-schematic style. When students were asked to annotate "raw" realistic images, both keywords and schematic representations failed to prepare them for this task. We conclude that supplementary images facilitate the comprehension process and despite their visual clutter, realistic representations do not hinder learning in an introductory course.

Molecular Diagnostics for the Study of Hypersonic Flows

DTIC Science & Technology

2000-04-01

between the at the F4 high-enthalpy wind tunnel [21]. Figure 5 electrodes. The fast electrons exit the anode disk shows the image acquired 90 ms after...Discharge Figure 5 Typical F4 run, flow at 90 ms , Grounded Electrode convection imaged 5 jis after beam emission. Figure 4 Schematic diagram of the...accounts for the classical phenomena like absorption and Figure 6 Velocity profile at 90 ms for run of refraction. X(2) is the second-order

Closed Loop Control and Turbulent Flows

DTIC Science & Technology

2005-10-01

10 2.9 A schematic diagram of the PIV setup. The PIV controller synchronizes the firing of the lasers and camera...is 16 ms. Consequently, the frequency scaling factor, f*, is 62 Hz. Twin Nd:YAG PIv Back Laser , measurement tressur I5 area tank Water’SuppIly Laser ...YAG twin 532-nm laser was used to illuminate the flow field, and 8-bit gTay-scale images were captured using a 1360 by 1024-pixel resolution camera

Nonlinear response of dense colloidal suspensions under oscillatory shear: mode-coupling theory and Fourier transform rheology experiments.

PubMed

Brader, J M; Siebenbürger, M; Ballauff, M; Reinheimer, K; Wilhelm, M; Frey, S J; Weysser, F; Fuchs, M

2010-12-01

Using a combination of theory, experiment, and simulation we investigate the nonlinear response of dense colloidal suspensions to large amplitude oscillatory shear flow. The time-dependent stress response is calculated using a recently developed schematic mode-coupling-type theory describing colloidal suspensions under externally applied flow. For finite strain amplitudes the theory generates a nonlinear response, characterized by significant higher harmonic contributions. An important feature of the theory is the prediction of an ideal glass transition at sufficiently strong coupling, which is accompanied by the discontinuous appearance of a dynamic yield stress. For the oscillatory shear flow under consideration we find that the yield stress plays an important role in determining the nonlinearity of the time-dependent stress response. Our theoretical findings are strongly supported by both large amplitude oscillatory experiments (with Fourier transform rheology analysis) on suspensions of thermosensitive core-shell particles dispersed in water and Brownian dynamics simulations performed on a two-dimensional binary hard-disk mixture. In particular, theory predicts nontrivial values of the exponents governing the final decay of the storage and loss moduli as a function of strain amplitude which are in good agreement with both simulation and experiment. A consistent set of parameters in the presented schematic model achieves to jointly describe linear moduli, nonlinear flow curves, and large amplitude oscillatory spectroscopy.

A novel visual hardware behavioral language

NASA Technical Reports Server (NTRS)

Li, Xueqin; Cheng, H. D.

1992-01-01

Most hardware behavioral languages just use texts to describe the behavior of the desired hardware design. This is inconvenient for VLSI designers who enjoy using the schematic approach. The proposed visual hardware behavioral language has the ability to graphically express design information using visual parallel models (blocks), visual sequential models (processes) and visual data flow graphs (which consist of primitive operational icons, control icons, and Data and Synchro links). Thus, the proposed visual hardware behavioral language can not only specify hardware concurrent and sequential functionality, but can also visually expose parallelism, sequentiality, and disjointness (mutually exclusive operations) for the hardware designers. That would make the hardware designers capture the design ideas easily and explicitly using this visual hardware behavioral language.

Mathematical Modeling Of Life-Support Systems

NASA Technical Reports Server (NTRS)

Seshan, Panchalam K.; Ganapathi, Balasubramanian; Jan, Darrell L.; Ferrall, Joseph F.; Rohatgi, Naresh K.

1994-01-01

Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

Early-Emerging Cognitive Vulnerability to Depression and the Serotonin Transporter Promoter Region Polymorphism

PubMed Central

Hayden, Elizabeth P.; Dougherty, Lea R.; Maloney, Bryan; Olino, Thomas M.; Sheikh, Haroon; Durbin, C. Emily; Nurnberger, John I.; Lahiri, Debomoy K.; Klein, Daniel N.

2009-01-01

Background Serotonin transporter promoter (5-HTTLPR) genotype appears to increase risk for depression in the context of stressful life events. However, the effects of this genotype on measures of stress sensitivity are poorly understood. Therefore, this study examined whether 5-HTTLPR genotype was associated with negative information processing biases in early childhood. Method Thirty-nine unselected seven-year-old children completed a negative mood induction procedure and a self-referent encoding task designed to measure positive and negative schematic processing. Children were also genotyped for the 5-HTTLPR gene. Results Children who were homozygous for the short allele of the 5-HTTLPR gene showed greater negative schematic processing following a negative mood prime than those with other genotypes. 5-HTTLPR genotype was not significantly associated with positive schematic processing. Limitations The sample size for this study was small. We did not analyze more recently reported variants of the 5-HTTLPR long alleles. Conclusions 5-HTTLPR genotype is associated with negative information processing styles following a negative mood prime in a nonclinical sample of young children. Such cognitive styles are thought to be activated in response to stressful life events, leading to depressive symptoms; thus, cognitive styles may index the “stress-sensitivity” conferred by this genotype. PMID:17804080

30 CFR 75.1103-5 - Automatic fire warning devices; actions and response.

Code of Federal Regulations, 2010 CFR

2010-07-01

... level reaches 10 parts per million above the established ambient level at any sensor location, automatic fire sensor and warning device systems shall provide an effective warning signal at the following... endangered and (ii) A map or schematic that shows the locations of sensors, and the intended air flow...

Investigation of Performance Improvements Including Application of Inlet Guide Vanes to a Cross-flow Fan

DTIC Science & Technology

2009-09-01

25 Figure 17. IGV Cut Out from Fluid Domain...Figure 22. Installed IGVS as Viewed from the CFF Inlet.................................................30 Figure 23. Schematic of Turbine Test Rig (TTR...44 Figure 28. Close In View of Velocity Vector Plot Near IGVS for 6IGV Model..............45 Figure 29

40 CFR 86.309-79 - Sampling and analytical system; schematic drawing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... subpart. Chemical dryers are not an acceptable method of removing the water. Water removal by condensation is acceptable. Means other than condensation may be used only with prior approval from the... subpart. (10) Dryer. Dryers D1 and D2 to remove the water from the bypass flows to prevent condensation in...

40 CFR 86.309-79 - Sampling and analytical system; schematic drawing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... subpart. Chemical dryers are not an acceptable method of removing the water. Water removal by condensation is acceptable. Means other than condensation may be used only with prior approval from the... subpart. (10) Dryer. Dryers D1 and D2 to remove the water from the bypass flows to prevent condensation in...

Land Treatment Research and Development Program, Synthesis of Research Results,

DTIC Science & Technology

1983-08-01

at Pack Forest, Washington .......... 22 8. Infiltration test and the relationship between cumulative water uptake and tim e...the chemistry of phos- phorus in land treatment ..................................... 37 18. Schematic diagram of the compartmental water flow model...39 19. Comparison between predicted and measured water content in slow rate soils .................................................. 39 20

33 CFR 159.57 - Installation, operation, and maintenance instructions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... complete parts list. (5) A schematic diagram showing the relative location of each part. (6) A wiring diagram. (7) A description of the service that may be performed by the user without coming into contact with sewage or chemicals. (8) Average and peak capacity of the device for the flow rate, volume, or...

33 CFR 159.57 - Installation, operation, and maintenance instructions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... complete parts list. (5) A schematic diagram showing the relative location of each part. (6) A wiring diagram. (7) A description of the service that may be performed by the user without coming into contact with sewage or chemicals. (8) Average and peak capacity of the device for the flow rate, volume, or...

33 CFR 159.57 - Installation, operation, and maintenance instructions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... complete parts list. (5) A schematic diagram showing the relative location of each part. (6) A wiring diagram. (7) A description of the service that may be performed by the user without coming into contact with sewage or chemicals. (8) Average and peak capacity of the device for the flow rate, volume, or...

False recall is reduced by damage to the ventromedial prefrontal cortex: implications for understanding the neural correlates of schematic memory.

PubMed

Warren, David E; Jones, Samuel H; Duff, Melissa C; Tranel, Daniel

2014-05-28

Schematic memory, or contextual knowledge derived from experience (Bartlett, 1932), benefits memory function by enhancing retention and speeding learning of related information (Bransford and Johnson, 1972; Tse et al., 2007). However, schematic memory can also promote memory errors, producing false memories. One demonstration is the "false memory effect" of the Deese-Roediger-McDermott (DRM) paradigm (Roediger and McDermott, 1995): studying words that fit a common schema (e.g., cold, blizzard, winter) often produces memory for a nonstudied word (e.g., snow). We propose that frontal lobe regions that contribute to complex decision-making processes by weighting various alternatives, such as ventromedial prefrontal cortex (vmPFC), may also contribute to memory processes by weighting the influence of schematic knowledge. We investigated the role of human vmPFC in false memory by combining a neuropsychological approach with the DRM task. Patients with vmPFC lesions (n = 7) and healthy comparison participants (n = 14) studied word lists that excluded a common associate (the critical item). Recall and recognition tests revealed expected high levels of false recall and recognition of critical items by healthy participants. In contrast, vmPFC patients showed consistently reduced false recall, with significantly fewer intrusions of critical items. False recognition was also marginally reduced among vmPFC patients. Our findings suggest that vmPFC increases the influence of schematically congruent memories, a contribution that may be related to the role of the vmPFC in decision making. These novel neuropsychological results highlight a role for the vmPFC as part of a memory network including the medial temporal lobes and hippocampus (Andrews-Hanna et al., 2010). Copyright © 2014 the authors 0270-6474/14/347677-06$15.00/0.

False Recall Is Reduced by Damage to the Ventromedial Prefrontal Cortex: Implications for Understanding the Neural Correlates of Schematic Memory

PubMed Central

Jones, Samuel H.; Duff, Melissa C.; Tranel, Daniel

2014-01-01

Schematic memory, or contextual knowledge derived from experience (Bartlett, 1932), benefits memory function by enhancing retention and speeding learning of related information (Bransford and Johnson, 1972; Tse et al., 2007). However, schematic memory can also promote memory errors, producing false memories. One demonstration is the “false memory effect” of the Deese–Roediger–McDermott (DRM) paradigm (Roediger and McDermott, 1995): studying words that fit a common schema (e.g., cold, blizzard, winter) often produces memory for a nonstudied word (e.g., snow). We propose that frontal lobe regions that contribute to complex decision-making processes by weighting various alternatives, such as ventromedial prefrontal cortex (vmPFC), may also contribute to memory processes by weighting the influence of schematic knowledge. We investigated the role of human vmPFC in false memory by combining a neuropsychological approach with the DRM task. Patients with vmPFC lesions (n = 7) and healthy comparison participants (n = 14) studied word lists that excluded a common associate (the critical item). Recall and recognition tests revealed expected high levels of false recall and recognition of critical items by healthy participants. In contrast, vmPFC patients showed consistently reduced false recall, with significantly fewer intrusions of critical items. False recognition was also marginally reduced among vmPFC patients. Our findings suggest that vmPFC increases the influence of schematically congruent memories, a contribution that may be related to the role of the vmPFC in decision making. These novel neuropsychological results highlight a role for the vmPFC as part of a memory network including the medial temporal lobes and hippocampus (Andrews-Hanna et al., 2010). PMID:24872571

Updating schematic emotional facial expressions in working memory: Response bias and sensitivity.

PubMed

Tamm, Gerly; Kreegipuu, Kairi; Harro, Jaanus; Cowan, Nelson

2017-01-01

It is unclear if positive, negative, or neutral emotional expressions have an advantage in short-term recognition. Moreover, it is unclear from previous studies of working memory for emotional faces whether effects of emotions comprise response bias or sensitivity. The aim of this study was to compare how schematic emotional expressions (sad, angry, scheming, happy, and neutral) are discriminated and recognized in an updating task (2-back recognition) in a representative sample of birth cohort of young adults. Schematic facial expressions allow control of identity processing, which is separate from expression processing, and have been used extensively in attention research but not much, until now, in working memory research. We found that expressions with a U-curved mouth (i.e., upwardly curved), namely happy and scheming expressions, favoured a bias towards recognition (i.e., towards indicating that the probe and the stimulus in working memory are the same). Other effects of emotional expression were considerably smaller (1-2% of the variance explained)) compared to a large proportion of variance that was explained by the physical similarity of items being compared. We suggest that the nature of the stimuli plays a role in this. The present application of signal detection methodology with emotional, schematic faces in a working memory procedure requiring fast comparisons helps to resolve important contradictions that have emerged in the emotional perception literature. Copyright © 2016 Elsevier B.V. All rights reserved.

Schematic knowledge changes what judgments of learning predict in a source memory task.

PubMed

Konopka, Agnieszka E; Benjamin, Aaron S

2009-01-01

Source monitoring can be influenced by information that is external to the study context, such as beliefs and general knowledge (Johnson, Hashtroudi, & Lindsay, 1993). We investigated the extent to which metamnemonic judgments predict memory for items and sources when schematic information about the sources is or is not provided at encoding. Participants made judgments of learning (JOLs) to statements presented by two speakers and were informed of the occupation of each speaker either before or after the encoding session. Replicating earlier work, prior knowledge decreased participants' tendency to erroneously attribute statements to schematically consistent but episodically incorrect speakers. The origin of this effect can be understood by examining the relationship between JOLs and performance: JOLs were equally predictive of item and source memory in the absence of prior knowledge, but were exclusively predictive of source memory when participants knew of the relationship between speakers and statements during study. Background knowledge determines the information that people solicit in service of metamnemonic judgments, suggesting that these judgments reflect control processes during encoding that reduce schematic errors.

Standalone engine simulator (SAES), Engine Dynamics simulator (EDS) Xerox Sigma 5 interface hardware manual

NASA Technical Reports Server (NTRS)

Kirshten, P. M.; Black, S.; Pearson, R.

1979-01-01

The ESS-EDS and EDS-Sigma interfaces within the standalone engine simulator are described. The operation of these interfaces, including the definition and use of special function signals and data flow paths within them during data transfers, is presented along with detailed schematics and circuit layouts of the described equipment.

Mathematical Fluid Dynamics of Plasma Flow Control Over High Speed Wings

DTIC Science & Technology

2009-02-01

decreased voltage; e= 8, d= 1 mm. electrode u fe ^mmm^^n/* Fyd electrode Fig. 23 Schematics of momentum and heat source distributions for...For a>25°, the influence of DBD on the vortex breakdown is not so clear, because the breakdown point is very close to the wing apex in all three

Quantification of absolute blood velocity using LDA

NASA Astrophysics Data System (ADS)

Borozdova, M. A.; Fedosov, I. V.; Tuchin, V. V.

2018-04-01

We developed novel schematics of a Laser Doppler anemometer where measuring volume is comparable with the red blood cell (RBC) size and a small period of interference fringes improves device resolution. The technique was used to estimate Doppler frequency shift at flow velocity measurements. It has been shown that technique is applicable for measurements in whole blood.

30 CFR 250.528 - What must I include in my casing pressure request?

Code of Federal Regulations, 2013 CFR

2013-07-01

... calculated MAWOPs; (h) All casing/riser pre-bleed down pressures; (i) Shut-in tubing pressure; (j) Flowing tubing pressure; (k) Date and the calculated daily production rate during last well test (oil, gas, basic...); (m) Well type (dry tree, hybrid, or subsea); (n) Date of diagnostic test; (o) Well schematic; (p...

30 CFR 250.527 - What must I include in my casing pressure request?

Code of Federal Regulations, 2012 CFR

2012-07-01

... calculated MAWOPs; (h) All casing/riser pre-bleed down pressures; (i) Shut-in tubing pressure; (j) Flowing tubing pressure; (k) Date and the calculated daily production rate during last well test (oil, gas, basic...); (m) Well type (dry tree, hybrid, or subsea); (n) Date of diagnostic test; (o) Well schematic; (p...

30 CFR 250.528 - What must I include in my casing pressure request?

Code of Federal Regulations, 2014 CFR

2014-07-01

... calculated MAWOPs; (h) All casing/riser pre-bleed down pressures; (i) Shut-in tubing pressure; (j) Flowing tubing pressure; (k) Date and the calculated daily production rate during last well test (oil, gas, basic...); (m) Well type (dry tree, hybrid, or subsea); (n) Date of diagnostic test; (o) Well schematic; (p...

Refrigeration generation using expander-generator units

NASA Astrophysics Data System (ADS)

Klimenko, A. V.; Agababov, V. S.; Koryagin, A. V.; Baidakova, Yu. O.

2016-05-01

The problems of using the expander-generator unit (EGU) to generate refrigeration, along with electricity were considered. It is shown that, on the level of the temperatures of refrigeration flows using the EGU, one can provide the refrigeration supply of the different consumers: ventilation and air conditioning plants and industrial refrigerators and freezers. The analysis of influence of process parameters on the cooling power of the EGU, which depends on the parameters of the gas expansion process in the expander and temperatures of cooled environment, was carried out. The schematic diagram of refrigeration generation plant based on EGU is presented. The features and advantages of EGU to generate refrigeration compared with thermotransformer of steam compressive and absorption types were shown, namely: there is no need to use the energy generated by burning fuel to operate the EGU; beneficial use of the heat delivered to gas from the flow being cooled in equipment operating on gas; energy production along with refrigeration generation, which makes it possible to create, using EGU, the trigeneration plants without using the energy power equipment. It is shown that the level of the temperatures of refrigeration flows, which can be obtained by using the EGU on existing technological decompression stations of the transported gas, allows providing the refrigeration supply of various consumers. The information that the refrigeration capacity of an expander-generator unit not only depends on the parameters of the process of expansion of gas flowing in the expander (flow rate, temperatures and pressures at the inlet and outlet) but it is also determined by the temperature needed for a consumer and the initial temperature of the flow of the refrigeration-carrier being cooled. The conclusion was made that the expander-generator units can be used to create trigeneration plants both at major power plants and at small energy.

Attentional focus during exposure in spider phobia: The effect of valence and schematicity of a partial distractor.

PubMed

Dethier, Vincent; Philippot, Pierre

2017-06-01

This study examines the impact of partial distractor valence and schematicity (i.e., their relation to fear representation) on exposure efficacy. One hundred forty-one spider phobics were exposed to spider pictures and asked, in a between-subjects experimental design, to form mental images of words that were fear related (to spiders) and negative (schematic negative), fear unrelated and negative (non-schematic negative) or fear unrelated and positive (non-schematic positive). Multilevel measures of anxiety were performed at pre-exposure, post-exposure and 6 days' follow-up. Results show that both of the negative condition groups displayed similar results on all outcome variables and systematically differed from the positive condition group. While the latter group displayed a stronger decline in distress during exposure itself, the other groups showed greater exposure benefits: a stronger decline in emotional and avoidance responses and skin conductance responses from pre- to post-exposure and more approach behaviours when confronted with a real spider. The critical feature of distraction thus seems not to be the fact of being distracted from the phobic stimulus, but rather the fact of performing emotional avoidance by distracting oneself from negative affect. The results highlight that the acceptance of aversive emotional states is a critical active process in successful exposure. Copyright © 2017 Elsevier Ltd. All rights reserved.

Flow Cytometry with Gold Nanoparticles and their Clusters as scattering Contrast Agents: FDTD Simulation of Light-Cell Interaction

PubMed Central

Tanev, Stoyan; Sun, Wenbo; Pond, James; Tuchin, Valery V.; Zharov, Vladimir P.

2010-01-01

The formulation of the Finite-Difference Time-Domain (FDTD) approach is presented in the framework of its potential applications to in vivo flow cytometry based on light scattering. The consideration is focused on comparison of light scattering by a single biological cell alone in controlled refractive index matching conditions and by cells labeled by gold nanoparticles. The optical schematics including phase contrast (OPCM) microscopy as a prospective modality for in vivo flow cytometry is also analyzed. The validation of the FDTD approach for the simulation of flow cytometry may open a new avenue in the development of advanced cytometric techniques based on scattering effects from nanoscale targets. PMID:19670359

A Three Dimensional Model of the Plasma Flow and Magnetic Fields in the Dayside Ionosphere of Venus.

DTIC Science & Technology

1982-03-01

and for his astute sug- gestions during the course of this research. Under his guidance, I have gained insights into physics which not only helped me...Magnetic Field Strength 148 References 152 ii LIST OF FIGURES Figure Title Page 2-1 Coordinate system 11 2-2 Velocity profiles 16 2-3 Magnetic prime...meridian current 32 system 2-4 Flux-rope schematic 37 3-1 Model regions and radial flow- 46 lines 3-2 Distortion of the IMF resulting 47 from

A Hybrid Kinetic Model of Asymmetric Thin Current Sheets with Sheared Flows in a Collisionless Plasma

DTIC Science & Technology

2010-12-27

z are aligned with those of the usual Geocentric Sun - Earth (aSE) coordinates. In this frame, +x points from the Earth to the Sun , +y points out of...current sheet (box) in the solar wind. x, y, and z are aligned with the aSE coordinates, with +X pointing from the Earth toward the Sun , +y out of the...account the exact ion orbits and such properties as the anisotropic and nondiagonal pressure tensor and sheared ion flows. Figure 1a shows a schematic

Thermal Control System Automation Project (TCSAP)

NASA Technical Reports Server (NTRS)

Boyer, Roger L.

1991-01-01

Information is given in viewgraph form on the Space Station Freedom (SSF) Thermal Control System Automation Project (TCSAP). Topics covered include the assembly of the External Thermal Control System (ETCS); the ETCS functional schematic; the baseline Fault Detection, Isolation, and Recovery (FDIR), including the development of a knowledge based system (KBS) for application of rule based reasoning to the SSF ETCS; TCSAP software architecture; the High Fidelity Simulator architecture; the TCSAP Runtime Object Database (RODB) data flow; KBS functional architecture and logic flow; TCSAP growth and evolution; and TCSAP relationships.

The Argon Geochronology Experiment (AGE)

NASA Technical Reports Server (NTRS)

Swindle, T. D.; Bode, R.; Fennema, A.; Chutjian, A.; MacAskill, J. A.; Darrach, M. R.; Clegg, S. M.; Wiens, R. C.; Cremers, D.

2006-01-01

This viewgraph presentation reviews the Argon Geochronology Experiment (AGE). Potassium-Argon dating is shown along with cosmic ray dating exposure. The contents include a flow diagram of the Argon Geochronology Experiment, and schematic diagrams of the mass spectrometer vacuum system, sample manipulation mechanism, mineral heater oven, and the quadrupole ion trap mass spectrometer. The Laser-Induced Breakdown Spectroscopy (LIBS) Operation with elemental abundances is also described.

Cognitive Structures in Vocational Information Processing and Decision Making.

ERIC Educational Resources Information Center

Nevill, Dorothy D.; And Others

1986-01-01

Tested the assumptions that the structural features of vocational schemas affect vocational information processing and career self-efficacy. Results indicated that effective vocational information processing was facilitated by well-integrated systems that processed information along fewer dimensions. The importance of schematic organization on the…

An open Markov chain scheme model for a credit consumption portfolio fed by ARIMA and SARMA processes

NASA Astrophysics Data System (ADS)

Esquível, Manuel L.; Fernandes, José Moniz; Guerreiro, Gracinda R.

2016-06-01

We introduce a schematic formalism for the time evolution of a random population entering some set of classes and such that each member of the population evolves among these classes according to a scheme based on a Markov chain model. We consider that the flow of incoming members is modeled by a time series and we detail the time series structure of the elements in each of the classes. We present a practical application to data from a credit portfolio of a Cape Verdian bank; after modeling the entering population in two different ways - namely as an ARIMA process and as a deterministic sigmoid type trend plus a SARMA process for the residues - we simulate the behavior of the population and compare the results. We get that the second method is more accurate in describing the behavior of the populations when compared to the observed values in a direct simulation of the Markov chain.

Antimnemonic effects of schemas in young and older adults

PubMed Central

Badham, Stephen P.; Maylor, Elizabeth A.

2016-01-01

Schema-consistent material that is aligned with an individual’s knowledge and experience is typically more memorable than abstract material. This effect is often more extreme in older adults and schema use can alleviate age deficits in memory. In three experiments, young and older adults completed memory tasks where the availability of schematic information was manipulated. Specifying nonobvious relations between to-be-remembered word pairs paradoxically hindered memory (Experiment 1). Highlighting relations within mixed lists of related and unrelated word pairs had no effect on memory for those pairs (Experiment 2). This occurred even though related word pairs were recalled better than unrelated word pairs, particularly for older adults. Revealing a schematic context in a memory task with abstract image segments also hindered memory performance, particularly for older adults (Experiment 3). The data show that processing schematic information can come with costs that offset mnemonic benefits associated with schema-consistent stimuli. PMID:25980799

Recognition of schematic facial displays of emotion in parents of children with autism.

PubMed

Palermo, Mark T; Pasqualetti, Patrizio; Barbati, Giulia; Intelligente, Fabio; Rossini, Paolo Maria

2006-07-01

Performance on an emotional labeling task in response to schematic facial patterns representing five basic emotions without the concurrent presentation of a verbal category was investigated in 40 parents of children with autism and 40 matched controls. 'Autism fathers' performed worse than 'autism mothers', who performed worse than controls in decoding displays representing sadness or disgust. This indicates the need to include facial expression decoding tasks in genetic research of autism. In addition, emotional expression interactions between parents and their children with autism, particularly through play, where affect and prosody are 'physiologically' exaggerated, may stimulate development of social competence. Future studies could benefit from a combination of stimuli including photographs and schematic drawings, with and without associated verbal categories. This may allow the subdivision of patients and relatives on the basis of the amount of information needed to understand and process social-emotionally relevant information.

Experiment to determine properties of packed particle beds and regenerators at cryogenic temperatures

NASA Technical Reports Server (NTRS)

Barclay, J. A.; Overton, W. C., Jr.; Stewart, W. F.; Sarangi, S.

1984-01-01

Studies related to the development of magnetic refrigeration and heat pump systems in temperature ranges from 4 K to ambient temperature and above have been conducted, taking into account the testing of the properties of packed-particle beds and regenerators at cryogenic temperatures as low as 4 K as an essential part of these studies. The present paper provides a description of the developed experimental apparatus and presents the results of recent measurements on packed-particle beds in the liquid helium and liquid nitrogen temperature ranges. Attention is given to a schematic of the apparatus and the data acquisition system, the various modes of gas flow, a schematic of a typical test bed with thermocouple positions, the calculation of transient heat transfer rates at different positions in the bed, the governing equations, and the procedures used for solving these equations.

Dual-Mode Combustion

NASA Technical Reports Server (NTRS)

Goyne, Christopher P.; McDaniel, James C.

2002-01-01

The Department of Mechanical and Aerospace Engineering at the University of Virginia has conducted an investigation of the mixing and combustion processes in a hydrogen fueled dual-mode scramjet combustor. The experiment essentially consisted of the "direct connect" continuous operation of a Mach 2 rectangular combustor with a single unswept ramp fuel injector. The stagnation enthalpy of the test flow simulated a flight Mach number of 5. Measurements were obtained using conventional wall instrumentation and laser based diagnostics. These diagnostics included, pressure and wall temperature measurements, Fuel Plume Imaging (FPI) and Particle Image Velocimetry (PIV). A schematic of the combustor configuration and a summary of the measurements obtained are presented. The experimental work at UVa was parallel by Computational Fluid Dynamics (CFD) work at NASA Langley. The numerical and experiment results are compared in this document.

Browsing schematics: Query-filtered graphs with context nodes

NASA Technical Reports Server (NTRS)

Ciccarelli, Eugene C.; Nardi, Bonnie A.

1988-01-01

The early results of a research project to create tools for building interfaces to intelligent systems on the NASA Space Station are reported. One such tool is the Schematic Browser which helps users engaged in engineering problem solving find and select schematics from among a large set. Users query for schematics with certain components, and the Schematic Browser presents a graph whose nodes represent the schematics with those components. The query greatly reduces the number of choices presented to the user, filtering the graph to a manageable size. Users can reformulate and refine the query serially until they locate the schematics of interest. To help users maintain orientation as they navigate a large body of data, the graph also includes nodes that are not matches but provide global and local context for the matching nodes. Context nodes include landmarks, ancestors, siblings, children and previous matches.

Unsteady and Three-Dimensional Flow in Turbomachines

DTIC Science & Technology

1999-12-01

designers must mitigate possible blade vibrations in the turbomachinery stages. The cyclical stresses associated with blade vibration can rapidly accrue... vibrational instability. In particular, the focus is upon developing a rational methodology towards "flutter clearance" that is, towards ensuring...model of the rotor that considers a single mode of vibration for each blade, as schematically represented in Fig. 4.2a. Under a coordinate

Theory, Computation and Experiment on Criticality and Stability of Vortices Separating from Edges

DTIC Science & Technology

2016-08-15

aerospace engineering research. These include dynamic stall in wind turbines and helicopter rotors, and flapping-wing vehicle (micro-air vehicle) design...and Robinson, M., “Blade Three-Dimensional Dynamic Stall Response to Wind Turbine Operating Condition,” Journal of Solar Energy Engineering , Vol...Snapshots of TEV shedding in vortex ring representation. . . . . . . . . . . . . . . . 57 7.3 Schematic description of separated tip flow model

Controllable Liquid Artificial Dielectric S-Band Phase Shifters

DTIC Science & Technology

1975-02-01

RVOS’TAT 114 Ih 1,0. IE F LONT TUBIOG SYSTEM uo Figure 4-1. Flow Sytem Schematic for Ku-Bland Cell 35 investigations of the effects of fMow on permitviity...of the effort spent *a the pb&*-i abithir bIa been deted to this facet of Pbhe fovestignton uslig the sep abm in nFigure 7-10. bumina!tios were made

The oblique impingement of an axisymmetric jet. [flow characteristics of jet flow over flat plates

NASA Technical Reports Server (NTRS)

Foss, J. F.; Kleis, S. J.

1976-01-01

The mechanics of the oblique impingement of an axisymmetric jet on a plane surface are examined in detail. The stagnation point is discussed. A schematic drawing of the problem and coordinate system used to describe the flow field are given. The kinematic features of the flow above the plate are examined in the context of the conservation of mass, the vorticity of the jet, and the vorticity introduced by the jetplate interaction. The dynamic features of the flow are examined in terms of the surface pressure distribution and the cause-effect relationships which exist between the pressure and velocity/vorticity distributions. Flow calculations performed are given. The investigation is relevant to the flow resulting from the interaction of the propulsion jet with the main airfoil (STOL aircraft), and is appropriate to an over- or under- wing configuration.

Thermochemical Users Facility | Bioenergy | NREL

Science.gov Websites

collaborate on research and development efforts or to use our equipment to test their materials and processes NREL's thermochemical process integration, scale-up, and piloting research. Schematic diagram of NRELs about NREL's thermochemical process integration, scale-up, and piloting research. Thermochemical

More About Arc-Welding Process for Making Carbon Nanotubes

NASA Technical Reports Server (NTRS)

Benavides, Jeanette M.; Leidecker, Henning

2005-01-01

High-quality batches of carbon nanotubes are produced at relatively low cost in a modified atmospheric-pressure electric-arc welding process that does not include the use of metal catalysts. What would normally be a welding rod and a weldment are replaced by an amorphous carbon anode rod and a wider, hollow graphite cathode rod. Both electrodes are water-cooled. The cathode is immersed in ice water to about 0.5 cm from the surface. The system is shielded from air by flowing helium during arcing. As the anode is consumed during arcing at 20 to 25 A, it is lowered to maintain it at an approximately constant distance above the cathode. The process causes carbon nanotubes to form on the lowest 5 cm of the anode. The arcing process is continued until the anode has been lowered to a specified height. The nanotube-containing material is then harvested. The additional information contained in the instant report consists mostly of illustrations of carbon nanotubes and a schematic diagram of the arc-welding setup, as modified for the production of carbon nanotubes.

Flow cytometry with gold nanoparticles and their clusters as scattering contrast agents: FDTD simulation of light-cell interaction.

PubMed

Tanev, Stoyan; Sun, Wenbo; Pond, James; Tuchin, Valery V; Zharov, Vladimir P

2009-09-01

The formulation of the finite-difference time-domain (FDTD) approach is presented in the framework of its potential applications to in-vivo flow cytometry based on light scattering. The consideration is focused on comparison of light scattering by a single biological cell alone in controlled refractive-index matching conditions and by cells labeled by gold nanoparticles. The optical schematics including phase contrast (OPCM) microscopy as a prospective modality for in-vivo flow cytometry is also analyzed. The validation of the FDTD approach for the simulation of flow cytometry may open up a new avenue in the development of advanced cytometric techniques based on scattering effects from nanoscale targets. 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Membrane Pump for Synthetic Muscle Actuation

DTIC Science & Technology

2009-09-28

FIG. 3 is a schematic representation of an embodiment of a muscle equipped to use electroosmotic flow in accordance with the present invention...water through the membrane to the cathode. This movement of water across the membrane during the application of current is called electroosmotic ...current and a 120 V AC source, again with an appropriate electronics package to control voltage and current. Preferably, the power source 316 can be

Spectrophotometers for plutonium monitoring in HB-line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lascola, R. J.; O'Rourke, P. E.; Kyser, E. A.

2016-02-12

This report describes the equipment, control software, calibrations for total plutonium and plutonium oxidation state, and qualification studies for the instrument. It also provides a detailed description of the uncertainty analysis, which includes source terms associated with plutonium calibration standards, instrument drift, and inter-instrument variability. Also included are work instructions for instrument, flow cell, and optical fiber setup, work instructions for routine maintenance, and drawings and schematic diagrams.

Extended behavioural device modelling and circuit simulation with Qucs-S

NASA Astrophysics Data System (ADS)

Brinson, M. E.; Kuznetsov, V.

2018-03-01

Current trends in circuit simulation suggest a growing interest in open source software that allows access to more than one simulation engine while simultaneously supporting schematic drawing tools, behavioural Verilog-A and XSPICE component modelling, and output data post-processing. This article introduces a number of new features recently implemented in the 'Quite universal circuit simulator - SPICE variant' (Qucs-S), including structure and fundamental schematic capture algorithms, at the same time highlighting their use in behavioural semiconductor device modelling. Particular importance is placed on the interaction between Qucs-S schematics, equation-defined devices, SPICE B behavioural sources and hardware description language (HDL) scripts. The multi-simulator version of Qucs is a freely available tool that offers extended modelling and simulation features compared to those provided by legacy circuit simulators. The performance of a number of Qucs-S modelling extensions are demonstrated with a GaN HEMT compact device model and data obtained from tests using the Qucs-S/Ngspice/Xyce ©/SPICE OPUS multi-engine circuit simulator.

Platform-independent method for computer aided schematic drawings

DOEpatents

Vell, Jeffrey L [Slingerlands, NY; Siganporia, Darius M [Clifton Park, NY; Levy, Arthur J [Fort Lauderdale, FL

2012-02-14

A CAD/CAM method is disclosed for a computer system to capture and interchange schematic drawing and associated design information. The schematic drawing and design information are stored in an extensible, platform-independent format.

Creative PDB`s (parts databases)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cote, T.J.

1998-12-31

PDB component property entries and creative picklists can make the schematic entry process and downstream tools such as BOM generation more useful. This presentation will show how creative PDB`s can enhance the design process. Examples of PDB entries developed at Los Alamos National Laboratory will be discussed.

Finding a face in the crowd: testing the anger superiority effect in Asperger Syndrome.

PubMed

Ashwin, Chris; Wheelwright, Sally; Baron-Cohen, Simon

2006-06-01

Social threat captures attention and is processed rapidly and efficiently, with many lines of research showing involvement of the amygdala. Visual search paradigms looking at social threat have shown angry faces 'pop-out' in a crowd, compared to happy faces. Autism and Asperger Syndrome (AS) are neurodevelopmental conditions characterised by social deficits, abnormal face processing, and amygdala dysfunction. We tested adults with high-functioning autism (HFA) and AS using a facial visual search paradigm with schematic neutral and emotional faces. We found, contrary to predictions, that people with HFA/AS performed similarly to controls in many conditions. However, the effect was reduced in the HFA/AS group when using widely varying crowd sizes and when faces were inverted, suggesting a difference in face-processing style may be evident even with simple schematic faces. We conclude there are intact threat detection mechanisms in AS, under simple and predictable conditions, but that like other face-perception tasks, the visual search of threat faces task reveals atypical face-processing in HFA/AS.

Technologies for ECLSS Evolution

NASA Technical Reports Server (NTRS)

Diamant, Bryce L.

1990-01-01

Viewgraphs and discussion on technologies for Environmental Control and Life Support System (ECLSS) evolution are presented. Topics covered include: atmosphere revitalization including CO2 removal, CO2 reduction, O2 generation, and trace contaminant control; water recovery and management including urine processing, hygiene water processing, and potable water processing; and waste management. ECLSS technology schematics, process diagrams, and fluid interfaces are included.

Molecular Ecology of Bacterial Populations in Environmental Hazardous Chemical Control

DTIC Science & Technology

1991-11-30

Reactor Figure 1. A schematic drawing of the bioreactor system for on-line studies of naphthalene degradation and light production by bioluminescent...the bioluminescent monitoring section. The reactor system consisted of a L. H. Fermentation Series 500 continuous flow bioreactor with a 1 L glass... studied the expression of the upper pathway operon of NAH7. Light induction in response to naphthalene in the strain HK44 was comparable in both

Calibration of Knollenberg FSSP Light-Scattering Counters for Measurement of Cloud Droplets

DTIC Science & Technology

1981-12-01

1979. 93. Kennedy, Bruce W., Arthur Kinghorn, and B. R. Hixon, "Engineering Flight Tests of Range Meteorological Sounding System Radiosonde," ASL-TR...spore particles (some of which are shown in figure 6)... 22 A-I. Schematic of the FSSP-100 optical system ........................... 27 A-2. FSSP...atmospheric cloud. (This device is manufactured by Particle Measurement Systems , Boulder, Colorado.) As droplets flow through an illumi- nated volume

NASA Bioreactor Schematic

NASA Technical Reports Server (NTRS)

2001-01-01

The schematic depicts the major elements and flow patterns inside the NASA Bioreactor system. Waste and fresh medium are contained in plastic bags placed side-by-side so the waste bag fills as the fresh medium bag is depleted. The compliance vessel contains a bladder to accommodate pressure transients that might damage the system. A peristolic pump moves fluid by squeezing the plastic tubing, thus avoiding potential contamination. The work is sponsored by NASA's Office of Biological and Physical Research. The bioreactor is managed by the Biotechnology Cell Science Program at NASA's Johnson Space Center (JSC). NASA-sponsored bioreactor research has been instrumental in helping scientists to better understand normal and cancerous tissue development. In cooperation with the medical community, the bioreactor design is being used to prepare better models of human colon, prostate, breast and ovarian tumors. Cartilage, bone marrow, heart muscle, skeletal muscle, pancreatic islet cells, liver and kidney are just a few of the normal tissues being cultured in rotating bioreactors by investigators.

The Development of Innovative Climates in Educational Organizations.

ERIC Educational Resources Information Center

Miles, Matthew B.

The actualization of educational improvements in school systems necessitates an innovative climate. A schematic diagram shows seven functions as constituting the planning and inventing process for educational improvement. Of these seven functions, four are developmental and adaptation processes, and three provide for the routinization of building…

Trade-off Assessment of Simplified Routing Models for Short-Term Hydropower Reservoir Optimization

NASA Astrophysics Data System (ADS)

Issao Kuwajima, Julio; Schwanenberg, Dirk; Alvardo Montero, Rodolfo; Mainardi Fan, Fernando; Assis dos Reis, Alberto

2014-05-01

Short-term reservoir optimization, also referred to as model predictive control, integrates model-based forecasts and optimization algorithms to meet multiple management objectives such as water supply, navigation, hydroelectricity generation, environmental obligations and flood protection. It is a valuable decision support tool to handle water-stress conditions or flooding events, and supports decision makers to minimize their impact. If the reservoir management includes downstream control, for example for mitigation flood damages in inundation areas downstream of the operated dam, the flow routing between the dam and the downstream inundation area is of major importance. The unsteady open channel flow in river reaches can be described by the one-dimensional Saint-Venant equations. However, owing to the mathematical complexity of those equations, some simplifications may be required to speed up the computation within the optimization procedure. Another strategy to limit the model runtime is a schematization on a course computational grid. In particular the last measure can introduce significant numerical diffusion into the solution. This is a major drawback, in particular if the reservoir release has steep gradients which we often find in hydropower reservoirs. In this work, four different routing models are assessed concerning their implementation in the predictive control of the Três Marias Reservoir located at the Upper River São Francisco in Brazil: i) a fully dynamic model using the software package SOBEK; ii) a semi-distributed rainfall-runoff model with Muskingum-Cunge routing for the flow reaches of interest, the MGB-IPH (Modelo Hidrológico de Grandes Bacias - Instituto de Pesquisas Hidráulicas); iii) a reservoir routing approach; and iv) a diffusive wave model. The last two models are implemented in the RTC-Tool toolbox. The overall model accuracy between the simplified models in RTC-Tools (iii, iv) and the more sophisticated SOBEK model (i) are comparable, and a lower performance was assessed for the MGB model (ii). Whereas the SOBEK model is able to propagate sharp discharge gradient downstream, the diffusive wave model is damping these gradients significantly due to the course spatial schematization. In the reservoir routing model, which is also schematized on a course grid, we counteract this drawback by modeling parts of the river reach by advection. This results in an excellent ratio between model accuracy / robustness and computational effort making it the approach of choice from the predictive control perspective.

Synthetic Biology: A Unifying View and Review Using Analog Circuits.

PubMed

Teo, Jonathan J Y; Woo, Sung Sik; Sarpeshkar, Rahul

2015-08-01

We review the field of synthetic biology from an analog circuits and analog computation perspective, focusing on circuits that have been built in living cells. This perspective is well suited to pictorially, symbolically, and quantitatively representing the nonlinear, dynamic, and stochastic (noisy) ordinary and partial differential equations that rigorously describe the molecular circuits of synthetic biology. This perspective enables us to construct a canonical analog circuit schematic that helps unify and review the operation of many fundamental circuits that have been built in synthetic biology at the DNA, RNA, protein, and small-molecule levels over nearly two decades. We review 17 circuits in the literature as particular examples of feedforward and feedback analog circuits that arise from special topological cases of the canonical analog circuit schematic. Digital circuit operation of these circuits represents a special case of saturated analog circuit behavior and is automatically incorporated as well. Many issues that have prevented synthetic biology from scaling are naturally represented in analog circuit schematics. Furthermore, the deep similarity between the Boltzmann thermodynamic equations that describe noisy electronic current flow in subthreshold transistors and noisy molecular flux in biochemical reactions has helped map analog circuit motifs in electronics to analog circuit motifs in cells and vice versa via a `cytomorphic' approach. Thus, a body of knowledge in analog electronic circuit design, analysis, simulation, and implementation may also be useful in the robust and efficient design of molecular circuits in synthetic biology, helping it to scale to more complex circuits in the future.

Differential effects of an adult observer's presence on sex-typed play behavior: A comparison between gender-schematic and gender-aschematic preschool children.

PubMed

Wilansky-Traynor, Pamela; Lobel, Thalma E

2008-08-01

The present study examined the differential effect of an adult observer's presence on the sex-typed play behavior of gender schematic and aschematic preschoolers. A total of 116 Israeli preschoolers (M age = 64.9 months) participated in the study. Children were classified as either gender schematic or aschematic based upon responses to a computerized measure of different sex stereotype components. Children's play behavior with gender typical and atypical, attractive and unattractive, toys was videotaped. An observer was present for half the children's play and absent for the other half's play. Observation status affected the aschematic, but not the schematic, children's play with gender typical toys. For example, observed aschematic boys spent a greater percent of time playing with the unattractive masculine toys compared to unobserved aschematic boys. This difference was not apparent for schematic boys. Additionally, a difference found for schematic boys was not apparent in schematic girls, i.e., when unobserved, schematic boys tended to spend a greater percent of time playing with the unattractive masculine toy than aschematic boys. Further, some differences were found for unattractive, and not attractive, toys. For instance, observed aschematic boys spent a greater percent of time playing with the unattractive masculine toy than did the unobserved aschematic boys. This gap was not found for the attractive masculine toy. Results are discussed with reference to the accessibility and complexity of gender schemas.

Schematic Patterns of Causal Evidence.

ERIC Educational Resources Information Center

Rholes, William S.; Walters, Jackie

1982-01-01

The study was to determine when the patterns of causal evidence proposed by Orvis, Cunningham and Kelly (1975) begin to function as schemata in the attributional process. One hundred forty-four subjects took part in the study. (RH)

Preliminary Design Phases, Part of Indoor Air Quality Design Tools for Schools

EPA Pesticide Factsheets

The typical design process for schools begins with programming and selection of the architectural-engineering team. It then proceeds through schematic design, design development, contract documents, construction, commissioning and occupancy.

Lymphatic Regeneration Within Porous VEGF-C Hydrogels for Secondary Lymphedema

DTIC Science & Technology

2004-07-01

A Lymphedema, however, strictly occurs when A B C swelling is due to a failure of lymph drainage in circumstances in which capillary filtration is not...increased. Figure 1: Schematic representation of Secondary Lymphedema. A) Normal lymphatic flow from the hand to the Thoracic duct (arrow). B ...of in vitro Proliferation and migration Assays of LEC in a Bodin chamber at 7 days. A) Ang-2 concentration of 0.22 jig/ml, B ) Ang-2 concentration of

High Efficiency Variable Speed Versatile Power Air Conditioning System for Military Vehicles

DTIC Science & Technology

2013-08-01

MOBILITY (P&M) MINI-SYMPOSIUM AUGUST 21-22, 2013 - TROY , MICHIGAN High efficiency variable speed versatile power air conditioning system for...power draw was measured using a calibrated Watt meter. The schematic of the setup is shown in Figure 5 and the setup is shown in Figure 6. Figure...Rocky Research environmental chamber. Cooling Capacity was directly measured in Btu/hr or Watts via measuring the Air flow velocity and the air

Cavitation and Wake Structure of Unsteady Tip Vortex Flows

DTIC Science & Technology

1992-12-10

wake structure generated by three-dimensional lifting surfaces. No longer can the wake be modeled as a simple horseshoe vortex structure with the tip...first initiates. -13- Z Strtn vortex "~Bound vortex "’ ; b Wake 2 Figure 1.5 Far-Field Horseshoe Model of a Finite Wing This figure shows a finite wing...Figure 1.11 Simplified Illustration of Wake Structure Behind an Oscillating Wing This schematic shows a simplified model of the trailing vortex

Active Control of Forebody Vortices on a schematic Aircraft Model

DTIC Science & Technology

2001-06-01

coeffi- The system comprised two miniature soleniod on/off cient (C, = 0.0013) was sufficient to reliably switch pneumatic valves to control the flow to...method and time-average rolling moment, pitching moment, and normal force. Nomenclature T duration a valve is open during the alternating blow- b wing...reasonably high reduced frequency of the valves , and the tubes that delivered the air to the (* =0.16). Having established that the forebody vor- nozzles

Quartz Crystal Microbalance Based System for High-Sensitivity Differential Sputter Yield Measurements (Preprint)

DTIC Science & Technology

2009-08-20

at low ion energies require appropriate ion sources. For example, past work using QCM sensors employed a magnetron as an ion source 32,33 . The...and for data logging. Detailed discussion of the QCM sensor is provided in Section IID. Figure 1. Schematic diagram of the experimental set-up...mass flow rate of 0.5 sccm. The PBN was biased negatively relative to ground potential. D. QCM Sensor and Temperature Control In deposition mode

Cognitive Consequences of the Negative Self.

ERIC Educational Resources Information Center

Wurf, Elissa; Markus, Hazel

Research on self-concept has usually focused on neutral or positive personality characteristics. To determine if negative beliefs about the self have schematic properities, 55 college students, assigned to one of four groups (shy schematics, shy aschematics, independent schematics, independent aschematics), based on a prescreening self-rating on…

Schematic displays for the Space Shuttle Orbiter multifunction cathode-ray-tube display system

NASA Technical Reports Server (NTRS)

Weiss, W.

1979-01-01

A standardized procedure for developing cathode ray tube displayed schematic diagrams. The displaying of Spacelab information on the space shuttle orbiter multifunction cathode ray tube display system is used to illustrate this procedure. Schematic displays with the equivalent tabular displays are compared.

Guidelines for the Development of Procedural Schematics for Research.

ERIC Educational Resources Information Center

Dolim, Michael P.

To aid the student or researcher in the development of an effective procedural schematic (a graphic description of a research plan showing the steps needed to reach a stated objective), guidelines are presented under three topic headings: Compositional elements, taxonomy of research terms, and examples of procedural schematics. An introduction…

Application of image processing on struvite recovery from swine wastewater by using the fluidized bed.

PubMed

Ye, Zhi-Long; Deng, Yujun; Ye, Xin; Lou, Yaoyin; Chen, Shaohua

2018-01-01

Fluidized granulation is one of the common methods used in wastewater treatment and resource recovery with harvesting millimeter-scale large particles. Presently, effective methods are lacking to measure the fluidized granules ranging from micro- to millimeter scales, with the consequence of ineffectively controlling and optimizing the granulation process. In this work, recovering struvite (MgNH 4 PO 4 ·6H 2 O) from swine wastewater by using a fluidized bed was taken as an example. Image processing was applied to analyze the properties of different types of struvite granules, including morphology, particle size distribution, number density and mass concentration. Four stages of the struvite crystal evolution were therefore defined: aggregation, aggregate compaction, cluster-agglomerating and coating growth. These stages could occur simultaneously or sequentially. Up-flow rates of 30-80 mm/s in the fluidized bed sustained 600-876 g/L granular solids. Results revealed that the coating-growth granules were formed with compact aggregates or cluster-agglomerating granules as the nuclei. The growth rates for the different types of particles, including population growth, mass increase and particle size enlargement, were determined. In final, a schematic illustration for struvite granulation process is also presented.

Humidity Measurements: A Psychrometer Suitable for On-Line Data Acquisition.

ERIC Educational Resources Information Center

Caporaloni, Marina; Ambrosini, Roberto

1992-01-01

Explains the typical design, operation, and calibration of a traditional psychrometer. Presents the method utilized for this class project with design considerations, calibration techniques, remote data sensing schematic, and specifics of the implementation process. (JJK)

Developmental and Individual Differences in Preschoolers' Recognition Memories: The Influences of Gender Schematization and Verbal Labeling of Information.

ERIC Educational Resources Information Center

Levy, Gary D.

1989-01-01

Examines developmental and individual differences in the effects of gender schematization on young children's memories for gender-typed information, and investigates the interactive effects of children's age, gender schematization, and verbal labeling of information on preschoolers' memories for gender typed information. (JS)

Schematic driven layout of Reed Solomon encoders

NASA Technical Reports Server (NTRS)

Arave, Kari; Canaris, John; Miles, Lowell; Whitaker, Sterling

1992-01-01

Two Reed Solomon error correcting encoders are presented. Schematic driven layout tools were used to create the encoder layouts. Special consideration had to be given to the architecture and logic to provide scalability of the encoder designs. Knowledge gained from these projects was used to create a more flexible schematic driven layout system.

P and W propulsion systems studies results/status

NASA Technical Reports Server (NTRS)

Smith, Martin G., Jr.; Champagne, George A.

1992-01-01

The topics covered include the following: Pratt and Whitney (P&W) propulsion systems studies - NASA funded efforts to date; P&W engine concepts; P&W combustor focus - rich burn quick quench (RBQQ) concept; mixer ejector nozzle concept - large flow entrainment reduces jet noise; technology impact on NO(x) emissions - mature RBQQ combustor reduces NO(x) up to 85 percent; technology impact on sideline noise characteristics of Mach 2.4 turbine bypass engines (TBE's) - 600 lb/sec airflow size; technology impact on takeoff gross weight (TOGW) - provides up to 12 percent TOGW reduction; HSCT quiet engine concepts; TBE inlet valve/ejector nozzle concept schematic; mixed flow turbofan study; and exhaust nozzle conceptual design.

Study of cryogenic propellant systems for loading the space shuttle

NASA Technical Reports Server (NTRS)

Voth, R. O.; Steward, W. G.; Hall, W. J.

1974-01-01

Computer programs were written to model the liquid oxygen loading system for the space shuttle. The programs allow selection of input data through graphic displays which schematically depict the part of the system being modeled. The computed output is also displayed in the form of graphs and printed messages. Any one of six computation options may be selected. The first four of these pertain to thermal stresses, pressure surges, cooldown times, flow rates and pressures during cooldown. Options five and six deal with possible water hammer effects due to closing of valves, steady flow and transient response to changes in operating conditions after cooldown. Procedures are given for operation of the graphic display unit and minicomputer.

A novel boundary layer sensor utilizing domain switching in ferroelectric liquid crystals

NASA Technical Reports Server (NTRS)

Parmar, D. S.

1991-01-01

This paper describes the design and the principles of operation of a novel sensor for the optical detection of a shear stress field induced by air or gas flow on a rigid surface. The detection relies on the effects of shear-induced optical switching in ferroelectric liquid crystals. It is shown that the method overcomes many of the limitations of similar measuring techniques including those using cholesteric liquid crystals. The present method offers a preferred alternative for flow visualization and skin friction measurements in wind-tunnel experiments on laminar boundary layer transition investigations. A theoretical model for the optical response to shear stress is presented together with a schematic diagram of the experimental setup.

Effects of the "Beauty Is Good" Stereotype on Children's Information Processing.

ERIC Educational Resources Information Center

Ramsey, Jennifer L.; Langlois, Judith H.

2002-01-01

Two studies examined schematic information processing as a function of attractiveness stereotyping among 3- to 7- year-olds. Found that children made more errors identifying female characters with stereotype-inconsistent traits but either did just the opposite with male characters or had no difference in errors with male characters. Findings pose…

Semiconductors: In Situ Processing of Photovoltaic Devices

NASA Technical Reports Server (NTRS)

Curreri, Peter A.

1998-01-01

The possible processing of semiconductor photovoltaic devices is discussed. The requirements for lunar PV cells is reviewed, and the key challenges involved in their manufacturing are investigated. A schematic diagram of a passivated emitter and rear cell (PERC) is presented. The possible fabrication of large photovoltaic arrays in space from lunar materials is also discussed.

College of DuPage Planning Process: College of DuPage Planning, the Foundation for Decision Making.

ERIC Educational Resources Information Center

College of DuPage, Glen Ellyn, IL. Office of Research and Planning.

At College of DuPage (CD), in Glen Ellyn, Illinois, institutional planning is a multi-level, on-going process involving continuous college-wide input. The nine schematic levels in the CD planning process are interconnected and progress from global and broad-based issues, answering such questions as why the college exists, to concrete levels…

[Fiat Lux. May be no more true in cytometry! Go to mass and spectrum but still stay classic].

PubMed

Idziorek, Thierry; Cazareth, Julie; Blanc, Catherine; Jouy, Nathalie; Bourdely, Pierre; Corneau, Aurélien

2018-05-01

The last decade has been an era of accelerated technological progress for flow cytometry. New technologies have been developed such as mass cytometry in which standard fluorochromes have been replaced by lanthanide-based non-radioactive metals and by spectral cytometry that measures the complete fluorescence spectrum. In this review, we schematically describe conventional, mass and spectral cytometry and present the plus and minus of each technology. © 2018 médecine/sciences – Inserm.

Effects of Compression, Staging, and Braid Angle on Braided Rope Seal Performance

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M.; Dunlap, Patrick H.; Adams, Michael L.

2006-01-01

This viewgraph presentation describes the effects of compression, staging and braid angle on braided rope seals. The contents include: 1) Test Fixture Schematics; 2) Comparison of Hybrid Seal Braid Architecture; 3) Residual Interference After Compression Cycling; 4) Effect of Compression, Braid, and Staging on Seal Flow; 5) Effect of Staging on Seal Pressure Drop; 6) Three Stag Seal Durability; 7) P&W Turbine Vane Seal Requirements; and 8) Next Generation Fighter F-22 P&W F119 Engines.

Information storage at the molecular level - The design of a molecular shift register memory

NASA Technical Reports Server (NTRS)

Beratan, David N.; Onuchic, Jose Nelson; Hopfield, J. J.

1989-01-01

The control of electron transfer rates is discussed and a molecular shift register memory at the molecular level is described. The memory elements are made up of molecules which can exist in either an oxidized or reduced state and the bits can be shifted between the cells with photoinduced electron transfer reactions. The device integrates designed molecules onto a VLSI substrate. A control structure to modify the flow of information along a shift register is indicated schematically.

Destruction of Energetic Materials in Supercritical Water

DTIC Science & Technology

2002-06-25

PHASE BEHAVIOR UNDER HYDROTHERMAL PROCESSING CONDITIONS...172 E. MODELING TOOLS FOR SOLVATION FREE ENERGIES IN HYDROTHERMAL SYSTEMS...potential equations of state of hydrothermal solutions. Figure 25 shows a schematic of the transient grating experiment. In this experiment, two laser

16 CFR Figure 3 to Subpart A of... - Flooring Radiant Tester Schematic Side Elevation

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Flooring Radiant Tester Schematic Side Elevation 3 Figure 3 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1209, Subpt. A, Fig. 3 Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side...

16 CFR Figure 3 to Subpart A of... - Flooring Radiant Tester Schematic Side Elevation

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Flooring Radiant Tester Schematic Side Elevation 3 Figure 3 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1209, Subpt. A, Fig. 3 Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side...

16 CFR Figure 3 to Subpart A of... - Flooring Radiant Tester Schematic Side Elevation

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Flooring Radiant Tester Schematic Side Elevation 3 Figure 3 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1209, Subpt. A, Fig. 3 Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side...

16 CFR Figure 3 to Subpart A of... - Flooring Radiant Tester Schematic Side Elevation

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Flooring Radiant Tester Schematic Side Elevation 3 Figure 3 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1209, Subpt. A, Fig. 3 Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side...

16 CFR Figure 3 to Subpart A of... - Flooring Radiant Tester Schematic Side Elevation

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Flooring Radiant Tester Schematic Side Elevation 3 Figure 3 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 1209, Subpt. A, Fig. 3 Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side...

Experimental investigation of shock-cell noise reduction for dual-stream nozzles in simulated flight comprehensive data report. Volume 1: Test nozzles and acoustic data

NASA Technical Reports Server (NTRS)

Yamamoto, K.; Janardan, B. A.; Brausch, J. F.; Hoerst, D. J.; Price, A. O.

1984-01-01

Parameters which contribute to supersonic jet shock noise were investigated for the purpose of determining means to reduce such noise generation to acceptable levels. Six dual-stream test nozzles with varying flow passage and plug closure designs were evaluated under simulated flight conditions in an anechoic chamber. All nozzles had combined convergent-divergent or convergent flow passages. Acoustic behavior as a function of nozzle flow passage geometry was measured. The acoustic data consist primarily of 1/3 octave band sound pressure levels and overall sound pressure levels. Detailed schematics and geometric characteristics of the six scale model nozzle configurations and acoustic test point definitions are presented. Tabulation of aerodynamic test conditions and a computer listing of the measured acoustic data are displayed.

The Packing and Jamming of Real Polymer Chains

NASA Astrophysics Data System (ADS)

Xue, Gi; Teng, Chao

2010-03-01

Jamming make a hope to unifying theme for granular materials, glasses and threshold behavior in materials. Here we experimentally prepared a real polymer (polystyrene, PS) with various packing density which was described by inter-segment distances (r) detected by NMR. We cold-pressed PS powder at 20 ^oC (with shearing) and then released the pressure. We found that a transparent pellet with high modulus was formed. PS is usually manufactured by a hot-melting process at 180 ^oC. The rigidity and transparency of our cold-pressed pellet and its accuracy of the form are testimony that the PS powder once flowed under cold compression to take the shape of its container. This shear-induced melting is exactly what is expected within the jamming picture. By measuring r and the applied pressure σ under which the polymer chain starts to flow, we drew a schematic jamming phase diagram. The σ-r curve for a real polymer is convex at r < 0.5 nm, while it becomes concave as r is larger than 1 nm. It is the van der Waals attraction that acts as a confining pressure on segments, and makes the σ-r curve convex on the very short scales.

Nonlinear generation of large-scale magnetic fields in forced spherical shell dynamos

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livermore, P. W.; Hughes, D. W.; Tobias, S. M.

2010-03-15

In an earlier paper [P. W. Livermore, D. W. Hughes, and S. M. Tobias, ''The role of helicity and stretching in forced kinematic dynamos in a spherical shell'', Phys. Fluids 19, 057101 (2007)], we considered the kinematic dynamo action resulting from a forced helical flow in a spherical shell. Although mean field electrodynamics suggests that the resulting magnetic field should have a significant mean (axisymmetric) component, we found no evidence for this; the dynamo action was distinctly small scale. Here we extend our investigation into the nonlinear regime in which the magnetic field reacts back on the velocity via themore » Lorentz force. Our main result is somewhat surprising, namely, that nonlinear effects lead to a considerable change in the structure of the magnetic field, its final state having a significant mean component. By investigating the dominant flow-field interactions, we isolate the dynamo mechanism and show schematically how the generation process differs between the kinematic and nonlinear regimes. In addition, we are able to calculate some components of the transport coefficient {alpha} and thus discuss our results within the context of mean field electrodynamics.« less

Finite spaces and schemes

NASA Astrophysics Data System (ADS)

Sancho de Salas, Fernando

2017-12-01

A ringed finite space is a ringed space whose underlying topological space is finite. The category of ringed finite spaces contains, fully faithfully, the category of finite topological spaces and the category of affine schemes. Any ringed space, endowed with a finite open covering, produces a ringed finite space. We introduce the notions of schematic finite space and schematic morphism, showing that they behave, with respect to quasi-coherence, like schemes and morphisms of schemes do. Finally, we construct a fully faithful and essentially surjective functor from a localization of a full subcategory of the category of schematic finite spaces and schematic morphisms to the category of quasi-compact and quasi-separated schemes.

Fuels and Lubricants Influence on Turbine Engine Design and Performance

DTIC Science & Technology

1974-08-01

Temperatures, Mission A. 30 16. Misrion A Interceptor ECS SchemaLiu. 32 17. GEl4/FLiTE-2A Fuel Delivery System Schematic. 34 18. GE14 /FLITE-2A Oil Sump...Layout Drawing. 36 19. G0E4/FL,I’LE-2A LubriaLiui SysLem Schematic. 37 20. GEl4/FLITE-2A Fluid Power System Schematic. 41 21. GE14 /FLITE-2A Fluid Syqtem...Schematic. 1 35 63. GEI4/FI,ITE-2B ThermaL Profiles, MIL-L-27502. 140 64. GE14 /FLIT.-2B Thermal Profiles, 500’ F E’ster. 141 .ix 7 LIST OF ILUWSTRAT LON

Combustion behaviors of GO2/GH2 swirl-coaxial injector using non-intrusive optical diagnostics

NASA Astrophysics Data System (ADS)

GuoBiao, Cai; Jian, Dai; Yang, Zhang; NanJia, Yu

2016-06-01

This research evaluates the combustion behaviors of a single-element, swirl-coaxial injector in an atmospheric combustion chamber with gaseous oxygen and gaseous hydrogen (GO2/GH2) as the propellants. A brief simulated flow field schematic comparison between a shear-coaxial injector and the swirl-coaxial injector reveals the distribution characteristics of the temperature field and streamline patterns. Advanced optical diagnostics, i.e., OH planar laser-induced fluorescence and high-speed imaging, are simultaneously employed to determine the OH radical spatial distribution and flame fluctuations, respectively. The present study focuses on the flame structures under varying O/F mixing ratios and center oxygen swirl intensities. The combined use of several image-processing methods aimed at OH instantaneous images, including time-averaged, root-mean-square, and gradient transformation, provides detailed information regarding the distribution of the flow field. The results indicate that the shear layers anchored on the oxygen injector lip are the main zones of chemical heat release and that the O/F mixing ratio significantly affects the flame shape. Furthermore, with high-speed imaging, an intuitionistic ignition process and several consecutive steady-state images reveal that lean conditions make it easy to drive the combustion instabilities and that the center swirl intensity has a moderate influence on the flame oscillation strength. The results of this study provide a visualized analysis for future optimal swirl-coaxial injector designs.

Three-Dimensional Simulations of Tearing and Intermittency in Coronal Jets

NASA Technical Reports Server (NTRS)

Wyper, P. F.; DeVore, C. R.; Karpen, J. T.; Lynch, B. J.

2016-01-01

Observations of coronal jets increasingly suggest that local fragmentation and intermittency play an important role in the dynamics of these events. In this work we investigate this fragmentation in high-resolution simulations of jets in the closed-field corona. We study two realizations of the embedded-bipole model, whereby impulsive helical out flows are driven by reconnection between twisted and untwisted field across the domed fan plane of a magnetic null. We find that the reconnection region fragments following the onset of a tearing-like instability, producing multiple magnetic null points and flux-rope structures within the current layer. The flux ropes formed within the weak- field region in the center of the current layer are associated with \\blobs" of density enhancement that become filamentary threads as the flux ropes are ejected from the layer, whereupon new flux ropes form behind them. This repeated formation and ejection of flux ropes provides a natural explanation for the intermittent out flows, bright blobs of emission, and filamentary structure observed in some jets. Additional observational signatures of this process are discussed. Essentially all jet models invoke reconnection between regions of locally closed and locally open field as the jet-generation mechanism. Therefore, we suggest that this repeated tearing process should occur at the separatrix surface between the two flux systems in all jets. A schematic picture of tearing-mediated jet reconnection in three dimensions is outlined.

The Effect of Process Writing Activities on the Writing Skills of Prospective Turkish Teachers

ERIC Educational Resources Information Center

Dilidüzgün, Sükran

2013-01-01

Problem statement: Writing an essay is a most difficult creative work and consequently requires detailed instruction. There are in fact two types of instruction that contribute to the development of writing skills: Reading activities analysing texts in content and schematic structure to find out how they are composed and process writing…

A systems analysis of ward rounds in plastic surgery at a single center

PubMed Central

2017-01-01

Introduction: Ward rounds permeate health care delivery worldwide and form an important daily activity within all hospitals. In this study, the daily morning ward round in plastic surgery was examined from a teleological and systems point of view. Methods: Data were gathered from the following sources to inform the systems analysis: patient interviews, staff interviews, direct observations of the ward round on multiple occasions, and through process mapping. Results: To better understand the ward and its layout, a schematic of it was developed. Following observations of the ward round and the way in which decisions are made on it, an IDEF0 map was developed. Three patients were invited to take part in the study. Three members of staff were interviewed. The overarching themes from the interviews related to aspects of communication which this paper details. Conclusions: This small-scale study demonstrates how the ward round as a process can be assessed, including product quality, process quality, the measurement and management of capacity, the role of standardization, the role and significance of bottlenecks, the key information flows, including the role of feedback, and the motivation and incentives of system participants and ideas for improvement generated. PMID:29177228

Radiation Effects in Dual Heat Sinks for Cooling of Concentrated Photovoltaics

DTIC Science & Technology

2016-06-01

Schematic of a Concentrated Photovoltaic System . Source: [4]..................2 Figure 2. Temperature-Efficiency Curves of Select Solar Cells. Adapted from...in contrast to conventional systems . Conventional photovoltaics simply have incident solar radiation impinge on a semiconductor, CPV uses magnifying...reduce system cost. Figure 1 shows a concept schematic of a basic CPV system . Figure 1. Schematic of a Concentrated Photovoltaic System . Source

Optical Materials Characterization, Final Technical Report February 1, 1978-September 30, 1978

DTIC Science & Technology

1979-02-01

FIGURES PAGE Figure 1. (a) Schematic of spectrometer used for visible region refractometry . (b) Schematic of spectrometer used for non-,visible...region refractometry . Symbols: A = source, B = divided circle, C = prism table, D = collimator, E = telescope, F = collimating mirror, G = movable... refractometry . (b) Schematic of spectrometer used for non- visible region refractometry . Symbols: A = source, B = divided circle, C = prism table

Cross-Cultural Invariance in Story Recall.

ERIC Educational Resources Information Center

Mandler, Jean M.; And Others

1980-01-01

Compares data on recall of stories by Liberian nonschooled children, nonliterate adults, nonschooled literate adults and schooled literate adults to similar data on American children and adults. Results indicate a universality of certain kinds of schematic organization and their control of memorial processes. (CM)

Feasibility Study of the Geotextile Waste Filtration Unit.

DTIC Science & Technology

2000-02-10

Treatment Module 3-32 Figure 3-20. THE SCHEMATIC OF THE MOVING BED BIOFILM REACTOR ( MBBR ) 3൪ Figure 4-1. The Original Distributed Concept for WFUs...Moving Bed Biofilm Reactor ( MBBR ) process appears to be one of the most feasible processes available to meet Force Provider liquid waste stream...Moving Bed Biofilm Reactor ( MBBR ) process was then examined.31 In this system, both activated sludge and fixed-film processes occur in a bioreactor

Experimental and Theoretical Study on Cavitation Inception and Bubbly Flow Dynamics. Part 1. Design, Development and Operation of a Cavitation Susceptibility Meter. Part 2. Linearized Dynamics of Bubbly and Cavitating Flows with Bubble Dynamics Effects.

DTIC Science & Technology

1987-05-01

condition at the wall: v( x , y,.)/Uo = dri/dx results in the following bound- ary condition for R( x , y): 3 (OR) 2 1 [2S _ q] d2r (1 0) y X2 ; -PGo __ 2P d...i - X - 30 bar (downward triangles) for T = 20 *C (water temperature) and Dt = 1 mm (throat diameter). Figure 2.9. Bubble detection length L! necessary...diffuser of the venturi of Fig. 2.14 without incurring in laminar separation as a function of the distance x from the diffuser inlet. Figure 3.1. Schematic

Study of cryogenic propellant systems for loading the space shuttle. Part 2: Hydrogen systems

NASA Technical Reports Server (NTRS)

Steward, W. G.

1975-01-01

Computer simulation studies of liquid hydrogen fill and vent systems for the space shuttle are studied. The computer programs calculate maximum and minimum permissible flow rates during cooldown as limited by thermal stress considerations, fill line cooldown time, pressure drop, flow rates, vapor content, vent line pressure drop and vent line discharge temperature. The input data for these programs are selected through graphic displays which schematically depict the part of the system being analyzed. The computed output is also displayed in the form of printed messages and graphs. Digital readouts of graph coordinates may also be obtained. Procedures are given for operation of the graphic display unit and the associated minicomputer and timesharing computer.

Longitudinal Laminar Flow Between Cylinders Arranged in Regular Array

NASA Technical Reports Server (NTRS)

Sparrow, E. M.; Loeffler, A. L., Jr.

1959-01-01

The increasing complexity of heat transfer and process situations which involve fluid flow has demanded the frequent use of flow passages of unusual geometrical configuration. The present investigation is concerned with one such novel configuration, namely the longitudinal flow between solid cylindrical rods which are arranged in regular array. A schematic diagram of the situation under study. The rods may be located either in triangular or square array. The flow will be taken to be laminar and fully developed. The aim of this analysis is to determine the pressure drop, shear stress, and velocity-distribution characteristics of the system. The starting point of this study is the basic law of momentum conservation. The resulting differential equation has been solved in an approximate, but almost exact, manner by the use of truncated trigonometric series. Results are obtained over a wide range of porosity values for both the triangular and square arrays. Heat transfer has not been considered. The configuration under investigation has potential application in compact heat exchangers for nuclear reactors and other situations. Further the results should also be of interest in the theory of flow through unconsolidated porous beds (ia, 9a). The only related analytical work known to the authors is that of Emersleben (S), who considered only the square array. His rather involved solution, based on complex zeta functions, appears to be valid only at high porosities. Experiments covering a porosity range of 0.093 to 0.984 have been made by Sullivan (4) using parallel-oriented fibers, most of the tests being for fibers in random array. These previous investigations will be compared with the present theory in a later section.

The study of thermal processes in control systems of heat consumption of buildings

NASA Astrophysics Data System (ADS)

Tsynaeva, E.; A, Tsynaeva

2017-11-01

The article discusses the main thermal processes in the automated control systems for heat consumption (ACSHC) of buildings, schematic diagrams of these systems, mathematical models used for description of thermal processes in ACSHC. Conducted verification represented by mathematical models. It was found that the efficiency of the operation of ACSHC depend from the external and internal factors. Numerical study of dynamic modes of operation of ACSHC.

Endurance of high molecular weight carboxymethyl cellulose in corrosive environments

NASA Astrophysics Data System (ADS)

Murodov, M. M.; Rahmanberdiev, G. R.; Khalikov, M. M.; Egamberdiev, E. A.; Negmatova, K. C.; Saidov, M. M.; Mahmudova, N.

2012-07-01

Lignin obtained from the waste cooking liquor, formed after soda pulping process, is used as an inhibitor of NaCMC thermo oxidative degradation in presence of in extreme conditions during drilling oil wells. In this paper the schematic process of obtaining NaCMC by the principle of "monoapparat" on the basis of cellulose produced by non-wood cellulose materials is presented.

Guidelines for Energy-Efficient Sustainable Schools.

ERIC Educational Resources Information Center

Nicklas, Michael; Bailey, Gary; Rosemain, Pascale; Olin, Samuel

These guidelines present optional strategies to be considered in designing schools to be more energy efficient and sustainable. The guidelines are organized by the following design and construction process: site selection; selection of A & E design team; programming and goal setting; schematic design; design development; construction…

Using Conversation MOPs in Natural Language Interfaces.

ERIC Educational Resources Information Center

Turner, Elise H.; Cullingford, Richard E.

1989-01-01

Explores a method of combining convention and intention by representing conversation structure with conversation MOPs (schematic structures that store conversation rules as generalized episodes associated with goals the episodes achieved). Discusses how conversation MOPs process the opening portion of a dialogue in an interactive advice-giving…

NASA Glenn Research Center, Propulsion Systems Laboratory: Plan to Measure Engine Core Flow Water Vapor Content

NASA Technical Reports Server (NTRS)

Oliver, Michael

2014-01-01

This presentation will be made at the 92nd AIAA Turbine Engine Testing Working Group (TETWoG), a semi-annual technical meeting of turbine engine testing professionals. The objective is to describe an effort by NASA to measure the water vapor content on the core airflow in a full scale turbine engine ice crystal icing test and to open a discussion with colleagues how to accurately conduct the measurement based on any previous collective experience with the procedure, instruments and nature of engine icing testing within the group. The presentation lays out the schematics of the location in the flow path from which the sample will be drawn, the plumbing to get it from the engine flow path to the sensor and several different water vapor measurement technologies that will be used: Tunable diode laser and infrared spectroscopy.

Characterization of a Laser-Generated Perturbation in High-Speed Flow for Receptivity Studies

DTIC Science & Technology

2014-01-01

to trip the boundary layer. Figure 1. Schematic of the Boeing/AFOSR Mach-6 Quiet Tunnel (BAM6QT) The BAM6QT is a Ludwieg tube with a double- burst ...reduced to a 4-mm beam diameter by an aperture. Although the PIV-400 is a double- pulse laser, only the first pulse is used to generate perturbations in the...also both seeded, and pulse at 10 Hz, with a pulse width of about 7 ns. 2. Forming Optics The laser-generated perturbation is created by focusing a

High-Reynolds Number Viscous Flow Simulations on Embedded-Boundary Cartesian Grids

DTIC Science & Technology

2016-05-05

d ) 2 χ ≥ 0 −cw1 ( ν̃d ) 2 otherwise (6) 2 DISTRIBUTION A: Distribution approved for public release. with νt = ν̃fv1 and the usual definitions of fw...1 The wall function is coupled to the underlying Cartesian grid through its endpoints. This is illustrated schematically in Fig. 2 . At the wall it is...by interpolation from the Cartesian grid . This eliminates the problem of uτ → 0 , since this works in physical coordinates and not plus coordinates. We

A New Finite Element Supersonic Kernel Function Method in Lifting Surface Theory. Volume 2. User’s Manual

DTIC Science & Technology

1976-04-01

node. A schematic flow chart of the program is shown i& Fig. 1. Description of Variables BETA COEF IANGLE 1BUF ICHECK IMAX INFO JMAX KMAX ß...MAXINT DEL IMAX JMAX XLAMDA NMODE NP NELEM ICHECK Mach number Reduced frequency Mesh spacing as measured by the length of the side of the...Number of nodes Number of elements Option parameter used to check the mesh correctness. For ICHECK = 1, a quick run is performed to print out the

Intelligent Software for System Design and Documentation

NASA Technical Reports Server (NTRS)

2002-01-01

In an effort to develop a real-time, on-line database system that tracks documentation changes in NASA's propulsion test facilities, engineers at Stennis Space Center teamed with ECT International of Brookfield, WI, through the NASA Dual-Use Development Program to create the External Data Program and Hyperlink Add-on Modules for the promis*e software. Promis*e is ECT's top-of-the-line intelligent software for control system design and documentation. With promis*e the user can make use of the automated design process to quickly generate control system schematics, panel layouts, bills of material, wire lists, terminal plans and more. NASA and its testing contractors currently use promis*e to create the drawings and schematics at the E2 Cell 2 test stand located at Stennis Space Center.

Design and implementation of GaAs HBT circuits with ACME

NASA Technical Reports Server (NTRS)

Hutchings, Brad L.; Carter, Tony M.

1993-01-01

GaAs HBT circuits offer high performance (5-20 GHz) and radiation hardness (500 Mrad) that is attractive for space applications. ACME is a CAD tool specifically developed for HBT circuits. ACME implements a novel physical schematic-capture design technique where designers simultaneously view the structure and physical organization of a circuit. ACME's design interface is similar to schematic capture; however, unlike conventional schematic capture, designers can directly control the physical placement of both function and interconnect at the schematic level. In addition, ACME provides design-time parasitic extraction, complex wire models, and extensions to Multi-Chip Modules (MCM's). A GaAs HBT gate-array and semi-custom circuits have been developed with ACME; several circuits have been fabricated and found to be fully functional .

Βiocolloid and colloid transport through water-saturated columns packed with glass beads: Effect of gravity

NASA Astrophysics Data System (ADS)

Chrysikopoulos, C. V.; Syngouna, V. I.

2013-12-01

The role of gravitational force on biocolloid and colloid transport in water-saturated columns packed with glass beads was investigated. Transport experiments were performed with biocolloids (bacteriophages: ΦΧ174, MS2) and colloids (clays: kaolinite KGa-1b, montmorillonite STx-1b). The packed columns were placed in various orientations (horizontal, vertical, and diagonal) and a steady flow rate of Q=1.5 mL/min was applied in both up-flow and down-flow modes. All experiments were conducted under electrostatically unfavorable conditions. The experimental data were fitted with a newly developed, analytical, one dimensional, colloid transport model, accounting for gravity effects. The results revealed that flow direction has a significant influence on particle deposition. The rate of particle deposition was shown to be greater for up-flow than for down-flow direction, suggesting that gravity was a significant driving force for biocolloid and colloid deposition. Schematic illustration of a packed column with up-flow velocity having orientation (-i) with respect to gravity. The gravity vector components are: g(i)= g(-z) sinβ i, and g(-j)= -g(-z) cosβ j. Experimental setup showing the various column arrangements: (a) horizontal, (b) diagonal, and (c) vertical.

Microstructural Characterization of HSLA-100 GMA-Weldments

DTIC Science & Technology

1987-09-01

Intermeiate Oxygen Regime ----------- 66 D.) Schematic CCT Diagram - --------------- 66 9 ACKNOWLEDGEMENTS I wish to express my appreciation to my thesis...have been observed in this research [review Figures 31 (a), (b) and 35 (a)]. Figure 38 (d) shows a schematic CCT diagram reported by Glover (Ref. 5) and...Regime B.) High Ox. gen Regime C. )Interme late Oxygen Regime D.1 Schematic CCT Diagram 66 LIST OF REFERENCES 1. Anderson, T.L., Hyatt J A West, J.C

Jack Rabbit Pretest Data For TATB Based IHE Model Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, M M; Strand, O T; Bosson, S T

The Jack Rabbit Pretest series consisted of 5 focused hydrodynamic experiments, 2021E PT3, PT4, PT5, PT6, and PT7. They were fired in March and April of 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory, Livermore, California. These experiments measured dead-zone formation and impulse gradients created during the detonation of TATB based insensitive high explosive. This document contains reference data tables for all 5 experiments. These data tables include: (1) Measured laser velocimetry of the experiment diagnostic plate (2) Computed diagnostic plate profile contours through velocity integration (3) Computed center axis pressures through velocity differentiation. All timesmore » are in microseconds, referenced from detonator circuit current start. All dimensions are in millimeters. Schematic axi-symmetric cross sections are shown for each experiment. These schematics detail the materials used and dimensions of the experiment and component parts. This should allow anyone wanting to evaluate their TATB based insensitive high explosive detonation model against experiment. These data are particularly relevant in examining reactive flow detonation model prediction in computational simulation of dead-zone formation and resulting impulse gradients produced by detonating TATB based explosive.« less

Helmet Exhalation Capture System (HECS) Sizing Evaluation for an Advanced Space Suit Portable Life Support System

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Waguespack, Glenn M.; Paul, Thomas H.; Conger, Bruce C.

2008-01-01

As part of NASA s initiative to develop an advanced portable life support system (PLSS), a baseline schematic has been chosen that includes gaseous oxygen in a closed circuit ventilation configuration. Supply oxygen enters the suit at the back of the helmet and return gases pass over the astronaut s body to be extracted at the astronaut s wrists and ankles through the liquid cooling and ventilation garment (LCVG). The extracted gases are then treated using a rapid cycling amine (RCA) system for carbon dioxide and water removal and activated carbon for trace gas removal before being mixed with makeup oxygen and reintroduced into the helmet. Thermal control is provided by a suit water membrane evaporator (SWME). As an extension of the original schematic development, NASA evaluated several Helmet Exhalation Capture System (HECS) configurations as alternatives to the baseline. The HECS configurations incorporate the use of full contact masks or non-contact masks to reduce flow requirements within the PLSS ventilation subsystem. The primary scope of this study was to compare the alternatives based on mass and volume considerations; however other design issues were also briefly investigated. This paper summarizes the results of this sizing analysis task.

Media Stereotypes Analysis in the Classroom at the Student Audience

ERIC Educational Resources Information Center

Fedorov, Alexander

2015-01-01

Media Stereotypes Analysis is the identification and analysis of stereotypical images of people, ideas, events, stories, themes and etc. in media texts. Media stereotype reflects the well-established attitudes towards a particular object, it is schematic averaged, familiar, stable representation of genres, social processes/events, ideas, people,…

40 CFR 65.163 - Other records.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Detailed schematics, design specifications of the control device, and piping and instrumentation diagrams... FEDERAL AIR RULE Closed Vent Systems, Control Devices, and Routing to a Fuel Gas System or a Process § 65... bypass lines that could divert a vent stream away from the control device and to the atmosphere, the...

Thin Refractory Films on Fused Silica Crucibles

DTIC Science & Technology

1988-07-01

9 4.1.4 Iridium 11 4.1.5 Boron Nitride (BN) 11 4.2 Adherence Testing 13 4.3 Metallography 13 5.0 Conclusions and Recommendations 16 Accession For...Chamber 4 2. Schematic of Crucible Coating Apparatus (SiC, NbN, and TiB 2) 6 3. Schematic of CVD Apparatus for Iridium 7 4. Schematic of Apparatus for...ultrahigh-purity coatings of silicon carbide (SiC), niobium nitride (NbN), titanium diboride (TiB2), iridium , and boron nitride (BN) onto the interior

Schematic of Sample Analysis at Mars SAM Instrument

NASA Image and Video Library

2011-01-18

This schematic illustration for NASA Mars Science Laboratory Sample Analysis at Mars SAM instrument shows major components of the microwave-oven-size instrument, which will examine samples of Martian rocks, soil and atmosphere.

In Process Measurement of Hydrogen in Welding

DTIC Science & Technology

1986-09-01

Specimen Geometry.........40 Figure 4.8 GTAW Diffusible Hydrogen Specimen Geometry .......... 40 Figure 4.9 Schematic of Specimen Outgassing Container for... GTAW ) and gas metal arc welding (GMAW) have the lowest potentials for hydrogen pickup, while -. the flux-cored arc welding (FCAW) and submerged arc...wire during welding which is the major source of hydrogen in GMAW and GTAW . Although the FCAW process was originally considered an intrinsi- cally low

Neural Schematics as a unified formal graphical representation of large-scale Neural Network Structures.

PubMed

Ehrlich, Matthias; Schüffny, René

2013-01-01

One of the major outcomes of neuroscientific research are models of Neural Network Structures (NNSs). Descriptions of these models usually consist of a non-standardized mixture of text, figures, and other means of visual information communication in print media. However, as neuroscience is an interdisciplinary domain by nature, a standardized way of consistently representing models of NNSs is required. While generic descriptions of such models in textual form have recently been developed, a formalized way of schematically expressing them does not exist to date. Hence, in this paper we present Neural Schematics as a concept inspired by similar approaches from other disciplines for a generic two dimensional representation of said structures. After introducing NNSs in general, a set of current visualizations of models of NNSs is reviewed and analyzed for what information they convey and how their elements are rendered. This analysis then allows for the definition of general items and symbols to consistently represent these models as Neural Schematics on a two dimensional plane. We will illustrate the possibilities an agreed upon standard can yield on sampled diagrams transformed into Neural Schematics and an example application for the design and modeling of large-scale NNSs.

Schematic representation of case study research designs.

PubMed

Rosenberg, John P; Yates, Patsy M

2007-11-01

The paper is a report of a study to demonstrate how the use of schematics can provide procedural clarity and promote rigour in the conduct of case study research. Case study research is a methodologically flexible approach to research design that focuses on a particular case - whether an individual, a collective or a phenomenon of interest. It is known as the 'study of the particular' for its thorough investigation of particular, real-life situations and is gaining increased attention in nursing and social research. However, the methodological flexibility it offers can leave the novice researcher uncertain of suitable procedural steps required to ensure methodological rigour. This article provides a real example of a case study research design that utilizes schematic representation drawn from a doctoral study of the integration of health promotion principles and practices into a palliative care organization. The issues discussed are: (1) the definition and application of case study research design; (2) the application of schematics in research; (3) the procedural steps and their contribution to the maintenance of rigour; and (4) the benefits and risks of schematics in case study research. The inclusion of visual representations of design with accompanying explanatory text is recommended in reporting case study research methods.

Subsurface flow and vegetation patterns in tidal environments

NASA Astrophysics Data System (ADS)

Ursino, Nadia; Silvestri, Sonia; Marani, Marco

2004-05-01

Tidal environments are characterized by a complex interplay of hydrological, geomorphic, and biological processes, and their understanding and modeling thus require the explicit description of both their biotic and abiotic components. In particular, the presence and spatial distribution of salt marsh vegetation (a key factor in the stabilization of the surface soil) have been suggested to be related to topographic factors and to soil moisture patterns, but a general, process-based comprehension of this relationship has not yet been achieved. The present paper describes a finite element model of saturated-unsaturated subsurface flow in a schematic salt marsh, driven by tidal fluctuations and evapotranspiration. The conditions leading to the establishment of preferentially aerated subsurface zones are studied, and inferences regarding the development and spatial distribution of salt marsh vegetation are drawn, with important implications for the overall ecogeomorphological dynamics of tidal environments. Our results show that subsurface water flow in the marsh induces complex water table dynamics, even when the tidal forcing has a simple sinusoidal form. The definition of a space-dependent aeration time is then proposed to characterize root aeration. The model shows that salt marsh subsurface flow depends on the distance from the nearest creek or channel and that the subsurface water movement near tidal creeks is both vertical and horizontal, while farther from creeks, it is primarily vertical. Moreover, the study shows that if the soil saturated conductivity is relatively low (10-6 m s-1, values quite common in salt marsh areas), a persistently unsaturated zone is present below the soil surface even after the tide has flooded the marsh; this provides evidence of the presence of an aerated layer allowing a prolonged presence of oxygen for aerobic root respiration. The results further show that plant transpiration increases the extent and persistence of the aerated layer, thereby introducing a strong positive feedback: Pioneer plants on marsh edges have the effect of increasing soil oxygen availability, thus creating the conditions for the further development of other plant communities.

An evaluation of Computational Fluid dynamics model for flood risk analysis

NASA Astrophysics Data System (ADS)

Di Francesco, Silvia; Biscarini, Chiara; Montesarchio, Valeria

2014-05-01

This work presents an analysis of the hydrological-hydraulic engineering requisites for Risk evaluation and efficient flood damage reduction plans. Most of the research efforts have been dedicated to the scientific and technical aspects of risk assessment, providing estimates of possible alternatives and of the risk associated. In the decision making process for mitigation plan, the contribute of scientist is crucial, due to the fact that Risk-Damage analysis is based on evaluation of flow field ,of Hydraulic Risk and on economical and societal considerations. The present paper will focus on the first part of process, the mathematical modelling of flood events which is the base for all further considerations. The evaluation of potential catastrophic damage consequent to a flood event and in particular to dam failure requires modelling of the flood with sufficient detail so to capture the spatial and temporal evolutions of the event, as well of the velocity field. Thus, the selection of an appropriate mathematical model to correctly simulate flood routing is an essential step. In this work we present the application of two 3D Computational fluid dynamics models to a synthetic and real case study in order to evaluate the correct evolution of flow field and the associated flood Risk . The first model is based on a opensource CFD platform called openFoam. Water flow is schematized with a classical continuum approach based on Navier-Stokes equation coupled with Volume of fluid (VOF) method to take in account the multiphase character of river bottom-water- air systems. The second model instead is based on the Lattice Boltzmann method, an innovative numerical fluid dynamics scheme based on Boltzmann's kinetic equation that represents the flow dynamics at the macroscopic level by incorporating a microscopic kinetic approach. Fluid is seen as composed by particles that can move and collide among them. Simulation results from both models are promising and congruent to experimental results available in literature, thought the LBM model requires less computational effort respect to the NS one.

Online Parameterization of Lumped Thermal Dynamics in Cylindrical Lithium Ion Batteries for Core Temperature Estimation and Health Monitoring

DTIC Science & Technology

2012-01-01

Experiments have been conducted to validate the de- signed parameterization scheme. A 2.3Ah A123TM 26650 LiFePO4 /graphite battery is cycled with a BitrodeTM...management strategy. The type of battery used in the experiment ( LiFePO4 26650) is different from the one in Fig. 3. Schematics of the Flow Chamber [23...of a cylindrical lifepo4 /graphite lithium-ion battery,” Journal of Power Sources, vol. 195, pp. 2961–2968, 2010. [9] C. W. Park and A. K. Jaura

CMT for biomedical and other applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spanne, P.

This session includes two presentations describing applications for x-ray tomography using synchrotron radiation for biomedical uses and fluid flow modeling, and outlines advantages for using monoenergetic x-rays. Contrast mechanisms are briefly described and several graphs of absorbed doses and scattering of x-rays are included. Also presented are schematic diagrams of computerized tomographic instrumentation with camera head. A brief description of goals for a real time tomographic system and expected improvements to the system are described. Color photomicrographs of the Berea Sandstone and human bone are provided, as well as a 3-D microtomographic reconstruction of a human vertebra sample.

Introduction to the Portable Life Support Schematic and Technology Development Components

NASA Technical Reports Server (NTRS)

Conger, Bruce

2008-01-01

Conger presented the operations and functions of the baseline Constellation Program (CxP) Portable Life Support System (PLSS) schematic and key development technologies. He explained the functional descriptions of the schematic components in the fluid systems of the PLSS for multiple operational scenarios. PLSS subsystems include the oxygen subsystem, the ventilation subsystem, and the thermal subsystem. He also presented the operational PLSS modes: Nominal EVA mode, Umbilical - no recharge mode, Umbilical - with recharge mode, BENDS mode, BUDDY mode, Secondary oxygen mode, and the PLSS-removed umbilical mode.

Strategies for Perceiving Facial Expressions in Adults with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Walsh, Jennifer A.; Vida, Mark D.; Rutherford, M. D.

2014-01-01

Rutherford and McIntosh (J Autism Dev Disord 37:187-196, 2007) demonstrated that individuals with autism spectrum disorder (ASD) are more tolerant than controls of exaggerated schematic facial expressions, suggesting that they may use an alternative strategy when processing emotional expressions. The current study was designed to test this finding…

Development of a Model for Some Aspects of University Policy. Technical Report.

ERIC Educational Resources Information Center

Goossens, J. L. M.; And Others

A method to calculate the need for academic staff per faculty, based on educational programs and numbers of students, is described which is based on quantitative relations between programs, student enrollment, and total budget. The model is described schematically and presented in a mathematical form adapted to computer processing. Its application…

Affordances Perspective and Grammaticalization: Incorporation of Language, Environment and Users in the Model of Semantic Paths

ERIC Educational Resources Information Center

Andrason, Alexander; Visser, Marianna

2015-01-01

The present paper demonstrates that insights from the affordances perspective can contribute to developing a more comprehensive model of grammaticalization. The authors argue that the grammaticalization process is afforded differently depending on the values of three contributing parameters: the factor (schematized as a qualitative-quantitative…

Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

NASA Technical Reports Server (NTRS)

Schoenfeld, Michael

2009-01-01

A detailed description of the Nuclear Thermal Rocket Element Environmental Simulator (NTREES) is presented. The contents include: 1) Design Requirements; 2) NTREES Layout; 3) Data Acquisition and Control System Schematics; 4) NTREES System Schematic; and 5) NTREES Setup.

In vivo plant flow cytometry: A first proof-of-concept

PubMed Central

Nedosekin, Dmitry A.; Khodakovskaya, Mariya V.; Biris, Alexandru S.; Wang, Daoyuan; Xu, Yang; Villagarcia, Hector; Galanzha, Ekaterina I.; Zharov, Vladimir P.

2011-01-01

In vivo flow cytometry has facilitated advances in the ultrasensitive detection of tumor cells, bacteria, nanoparticles, dyes, and other normal and abnormal objects directly in blood and lymph circulatory systems. Here, we propose in vivo plant flow cytometry for the real-time noninvasive study of nanomaterial transport in xylem and phloem plant vascular systems. As a proof of this concept, we demonstrate in vivo real-time photoacoustic monitoring of quantum dot-carbon nanotube conjugate uptake and uptake by roots and spreading through stem to leaves in a tomato plant. In addition, in vivo scanning cytometry using multimodal photoacoustic, photothermal, and fluorescent detection schematics provided multiplex detection and identification of nanoparticles accumulated in plant leaves in the presence of intensive absorption, scattering, and autofluorescent backgrounds. The use of a portable fiber-based photoacoustic flow cytometer for studies of plant vasculature was demonstrated. These integrated cytometry modalities using both endogenous and exogenous contrast agents have a potential to open new avenues of in vivo study of the nutrients, products of photosynthesis and metabolism, nanoparticles, infectious agents, and other objects transported through plant vasculature. PMID:21905208

[Healthcare value chain: a model for the Brazilian healthcare system].

PubMed

Pedroso, Marcelo Caldeira; Malik, Ana Maria

2012-10-01

This article presents a model of the healthcare value chain which consists of a schematic representation of the Brazilian healthcare system. The proposed model is adapted for the Brazilian reality and has the scope and flexibility for use in academic activities and analysis of the healthcare sector in Brazil. It places emphasis on three components: the main activities of the value chain, grouped in vertical and horizontal links; the mission of each link and the main value chain flows. The proposed model consists of six vertical and three horizontal links, amounting to nine. These are: knowledge development; supply of products and technologies; healthcare services; financial intermediation; healthcare financing; healthcare consumption; regulation; distribution of healthcare products; and complementary and support services. Four flows can be used to analyze the value chain: knowledge and innovation; products and services; financial; and information.

Statistical significance test for transition matrices of atmospheric Markov chains

NASA Technical Reports Server (NTRS)

Vautard, Robert; Mo, Kingtse C.; Ghil, Michael

1990-01-01

Low-frequency variability of large-scale atmospheric dynamics can be represented schematically by a Markov chain of multiple flow regimes. This Markov chain contains useful information for the long-range forecaster, provided that the statistical significance of the associated transition matrix can be reliably tested. Monte Carlo simulation yields a very reliable significance test for the elements of this matrix. The results of this test agree with previously used empirical formulae when each cluster of maps identified as a distinct flow regime is sufficiently large and when they all contain a comparable number of maps. Monte Carlo simulation provides a more reliable way to test the statistical significance of transitions to and from small clusters. It can determine the most likely transitions, as well as the most unlikely ones, with a prescribed level of statistical significance.

A proposed origin of the Olympus Mons escarpment. [Martian volcanic feature

NASA Technical Reports Server (NTRS)

King, J. S.; Riehle, J. R.

1974-01-01

Olympus Mons (Nix Olympica) on Mars is delimited by a unique steep, nearly circular scarp. A pyroclastic model is proposed for the construct's origin. It is postulated that the Olympus Mons plateau is constructed predominantly of numerous ash-flow tuffs which were erupted from central sources over an extended period of time. Lava flows may be intercalated with the tuffs. A schematic radial profile incorporating the inferred compaction zones for an ash sheet is proposed. Following emplacement, eolian (and possibly fluvial) erosion and abrasion during dust storms would act on the ash sheets. Interior portions of the sheets would spall and slump following eolian erosion, generating steep, relatively smooth boundary scarps. The scarp would be circular due to symmetrical distribution of compaction zones. The model implies further that the Olympus Mons plateau rests on a more resistant rock substrate.

Schematic for efficient computation of GC, GC3, and AT3 bias spectra of genome

PubMed Central

Rizvi, Ahsan Z; Venu Gopal, T; Bhattacharya, C

2012-01-01

Selection of synonymous codons for an amino acid is biased in protein translation process. This biased selection causes repetition of synonymous codons in structural parts of genome that stands for high N/3 peaks in DNA spectrum. Period-3 spectral property is utilized here to produce a 3-phase network model based on polyphase filterbank concepts for derivation of codon bias spectra (CBS). Modification of parameters in this model can produce GC, GC3, and AT3 bias spectra. Complete schematic in LabVIEW platform is presented here for efficient and parallel computation of GC, GC3, and AT3 bias spectra of genomes alongwith results of CBS patterns. We have performed the correlation coefficient analysis of GC, GC3, and AT3 bias spectra with codon bias patterns of CBS for biological and statistical significance of this model. PMID:22368390

Schematic for efficient computation of GC, GC3, and AT3 bias spectra of genome.

PubMed

Rizvi, Ahsan Z; Venu Gopal, T; Bhattacharya, C

2012-01-01

Selection of synonymous codons for an amino acid is biased in protein translation process. This biased selection causes repetition of synonymous codons in structural parts of genome that stands for high N/3 peaks in DNA spectrum. Period-3 spectral property is utilized here to produce a 3-phase network model based on polyphase filterbank concepts for derivation of codon bias spectra (CBS). Modification of parameters in this model can produce GC, GC3, and AT3 bias spectra. Complete schematic in LabVIEW platform is presented here for efficient and parallel computation of GC, GC3, and AT3 bias spectra of genomes alongwith results of CBS patterns. We have performed the correlation coefficient analysis of GC, GC3, and AT3 bias spectra with codon bias patterns of CBS for biological and statistical significance of this model.

30 CFR 252.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analyses, laboratory... geophysical information. Interpreted geological information means knowledge, often in the form of schematic... geological information. Interpreted geophysical information means knowledge, often in the form of schematic...

30 CFR 250.105 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., identification of lithologic and fossil content, core analysis, laboratory analyses of physical and chemical... form of schematic cross sections, 3-dimensional representations, and maps, developed by determining the... means geophysical knowledge, often in the form of schematic cross sections, 3-dimensional...

30 CFR 550.105 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., identification of lithologic and fossil content, core analysis, laboratory analyses of physical and chemical... form of schematic cross sections, 3-dimensional representations, and maps, developed by determining the... means geophysical knowledge, often in the form of schematic cross sections, 3-dimensional...

30 CFR 250.105 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analysis, laboratory... means geological knowledge, often in the form of schematic cross sections, 3-dimensional representations... information. Interpreted geophysical information means geophysical knowledge, often in the form of schematic...

30 CFR 550.105 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., identification of lithologic and fossil content, core analysis, laboratory analyses of physical and chemical... form of schematic cross sections, 3-dimensional representations, and maps, developed by determining the... means geophysical knowledge, often in the form of schematic cross sections, 3-dimensional...

30 CFR 552.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analyses, laboratory... geophysical information. Interpreted geological information means knowledge, often in the form of schematic... geological information. Interpreted geophysical information means knowledge, often in the form of schematic...

30 CFR 552.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analyses, laboratory... geophysical information. Interpreted geological information means knowledge, often in the form of schematic... geological information. Interpreted geophysical information means knowledge, often in the form of schematic...

30 CFR 550.105 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., identification of lithologic and fossil content, core analysis, laboratory analyses of physical and chemical... form of schematic cross sections, 3-dimensional representations, and maps, developed by determining the... means geophysical knowledge, often in the form of schematic cross sections, 3-dimensional...

30 CFR 552.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analyses, laboratory... geophysical information. Interpreted geological information means knowledge, often in the form of schematic... geological information. Interpreted geophysical information means knowledge, often in the form of schematic...

30 CFR 252.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analyses, laboratory... geophysical information. Interpreted geological information means knowledge, often in the form of schematic... geological information. Interpreted geophysical information means knowledge, often in the form of schematic...

30 CFR 250.105 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analysis, laboratory... form of schematic cross sections, 3-dimensional representations, and maps, developed by determining the... means geophysical knowledge, often in the form of schematic cross sections, 3-dimensional...

30 CFR 252.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analyses, laboratory... geophysical information. Interpreted geological information means knowledge, often in the form of schematic... geological information. Interpreted geophysical information means knowledge, often in the form of schematic...

Attachment and the processing of social information across the life span: theory and evidence.

PubMed

Dykas, Matthew J; Cassidy, Jude

2011-01-01

Researchers have used J. Bowlby's (1969/1982, 1973, 1980, 1988) attachment theory frequently as a basis for examining whether experiences in close personal relationships relate to the processing of social information across childhood, adolescence, and adulthood. We present an integrative life-span-encompassing theoretical model to explain the patterns of results that have emerged from these studies. The central proposition is that individuals who possess secure experience-based internal working models of attachment will process--in a relatively open manner--a broad range of positive and negative attachment-relevant social information. Moreover, secure individuals will draw on their positive attachment-related knowledge to process this information in a positively biased schematic way. In contrast, individuals who possess insecure internal working models of attachment will process attachment-relevant social information in one of two ways, depending on whether the information could cause the individual psychological pain. If processing the information is likely to lead to psychological pain, insecure individuals will defensively exclude this information from further processing. If, however, the information is unlikely to lead to psychological pain, then insecure individuals will process this information in a negatively biased schematic fashion that is congruent with their negative attachment-related experiences. In a comprehensive literature review, we describe studies that illustrate these patterns of attachment-related information processing from childhood to adulthood. This review focuses on studies that have examined specific components (e.g., attention and memory) and broader aspects (e.g., attributions) of social information processing. We also provide general conclusions and suggestions for future research.

30 CFR 250.105 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analysis, laboratory.... Interpreted geological information means geological knowledge, often in the form of schematic cross sections... knowledge, often in the form of schematic cross sections, 3-dimensional representations, and maps, developed...

30 CFR 250.105 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... include, but is not limited to, identification of lithologic and fossil content, core analysis, laboratory.... Interpreted geological information means geological knowledge, often in the form of schematic cross sections... knowledge, often in the form of schematic cross sections, 3-dimensional representations, and maps, developed...

Thermochemical Process Integration, Scale-Up, and Piloting Publications |

Science.gov Websites

-Economic Assessment of Ex Situ Catalytic Fast Pyrolysis of Biomass: A Fixed Bed Reactor Implementation Scenario for Future Feasibility, Topics in Catalysis Image of a schematic of hot gas filter and ex situ Research Pathways with In Situ and Ex Situ Upgrading of Fast Pyrolysis Vapors, NREL Technical Report Image

Three-Month-Olds' Visual Preference for Faces and Its Underlying Visual Processing Mechanisms

ERIC Educational Resources Information Center

Turati, C.; Valenza, E.; Leo, I.; Simion, F.

2005-01-01

This study was aimed at investigating the face preference phenomenon and its underlying mechanisms at 3 months of age. Using an eye-tracker apparatus, Experiment 1 demonstrated that 3-month-olds prefer natural face images to unnatural ones, replicating and extending previous evidence obtained with schematic facelike stimuli. Experiments 2 and 3…

An Activity to Teach Students about Schematic Processing

ERIC Educational Resources Information Center

Isbell, Linda M.; Tyler, James M.; Burns, Kathleen C.

2007-01-01

We designed a classroom activity to foster students' understanding of what schemas are and how they function. We used a video of the instructor as an infant to illustrate how schemas influence gender stereotyping. Before the video, we told students that the baby was either a boy or a girl. After the video, students rated whether the baby would…

Models of Individual Trajectories in Computer-Assisted Instruction for Deaf Students. Technical Report No. 214.

ERIC Educational Resources Information Center

Suppes, P.; And Others

From some simple and schematic assumptions about information processing, a stochastic differential equation is derived for the motion of a student through a computer-assisted elementary mathematics curriculum. The mathematics strands curriculum of the Institute for Mathematical Studies in the Social Sciences is used to test: (1) the theory and (2)…

33 CFR 150.15 - What must the operations manual include?

Code of Federal Regulations, 2014 CFR

2014-07-01

... structure and systems. The operator must include schematics of all applicable systems. Schematics must show the location of valves, gauges, system working pressure, relief settings, monitoring systems, and other pertinent information. (d) Communications system. A description of a comprehensive communications...

33 CFR 150.15 - What must the operations manual include?

Code of Federal Regulations, 2013 CFR

2013-07-01

... structure and systems. The operator must include schematics of all applicable systems. Schematics must show the location of valves, gauges, system working pressure, relief settings, monitoring systems, and other pertinent information. (d) Communications system. A description of a comprehensive communications...

Micromechanical Sensor for the Spectral Decomposition of Acoustic Signals

DTIC Science & Technology

2012-02-01

8 Figure 2.2: Reverse Ballistic Air Gun ................................................................................. 9 Figure 2.3: A MEMS...Schematic of the Sensor including Sensor-to-Sensor Parasitic .................... 177 Figure 5.9: Schematic of Laser Machined Sensor...178 Figure 5.10: Laser Machined Sensor Mode 1

Back to the Future: Past and Future Era-Based Schematic Support and Associative Memory for Prices in Younger and Older Adults

PubMed Central

Castel, Alan D.; McGillivray, Shannon; Worden, Kendell M.

2014-01-01

Older adults typically display various associative memory deficits, but these deficits can be reduced when conditions allow for the use of prior knowledge or schematic support. To determine how era-specific schematic support and future simulation might influence associative memory, we examined how younger and older adults remember prices from the past as well as the future. Younger and older adults were asked to imagine the past or future, and then studied items and prices from approximately 40 years ago (market value prices from the 1970s) or 40 years in the future. In Experiment 1, all items were common items (e.g., movie ticket, coffee) and the associated prices reflected the era in question, whereas in Experiment 2, some item-price pairs were specific to the time period (e.g., typewriter, robot maid), to test different degrees of schematic support. After studying the pairs, participants were shown each item and asked to recall the associated price. In both experiments, older adults showed similar performance as younger adults in the past condition for the common items, whereas age-related differences were greater in the future condition and for the era-specific items. The findings suggest that in order for schematic support to be effective, recent (and not simply remote) experience is needed in order to enhance memory. Thus, whereas older adults can benefit from “turning back the clock,” younger adults better remember future-oriented information compared with older adults, outlining age-related similarities and differences in associative memory and the efficient use of past and future-based schematic support. PMID:24128073

Back to the future: past and future era-based schematic support and associative memory for prices in younger and older adults.

PubMed

Castel, Alan D; McGillivray, Shannon; Worden, Kendell M

2013-12-01

Older adults typically display various associative memory deficits, but these deficits can be reduced when conditions allow for the use of prior knowledge or schematic support. To determine how era-specific schematic support and future simulation might influence associative memory, we examined how younger and older adults remember prices from the past as well as the future. Younger and older adults were asked to imagine the past or future, and then studied items and prices from approximately 40 years ago (market value prices from the 1970s) or 40 years in the future. In Experiment 1, all items were common items (e.g., movie ticket, coffee) and the associated prices reflected the era in question, whereas in Experiment 2, some item-price pairs were specific to the time period (e.g., typewriter, robot maid), to test different degrees of schematic support. After studying the pairs, participants were shown each item and asked to recall the associated price. In both experiments, older adults showed similar performance as younger adults in the past condition for the common items, whereas age-related differences were greater in the future condition and for the era-specific items. The findings suggest that in order for schematic support to be effective, recent (and not simply remote) experience is needed in order to enhance memory. Thus, whereas older adults can benefit from "turning back the clock," younger adults better remember future-oriented information compared with older adults, outlining age-related similarities and differences in associative memory and the efficient use of past and future-based schematic support. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Materials Research for Advanced Inertial Instrumentation. Task 3. Rare Earth Magnetic Material Technology as Related to Gyro Torquers and Motors.

DTIC Science & Technology

1980-12-01

spray process ...... ............... .. 40 9 Etched microstructures of as-received alloys ................ 42 10 Microstructures of as...Figure 8. Schematic sketch of spray process . 40 4.5 Results and Discussion 4.5.1 Alloy Procurement The desired compositions of the deposits (after... deposited samples...................... 44 11 As- Sprayed x-ray patterns obtained on two deposits made with 34 wt % Sm and one with 30 wt % Sm powders

Corrosion Screening of EV31A Magnesium and Other Magnesium Alloys using Laboratory-Based Accelerated Corrosion and Electro-Chemical Methods

DTIC Science & Technology

2014-07-01

corrosion studies (16). A schematic of the SWAP process and example of the powder produced is included in figure 4. This alloy contains amounts of Al ...advanced powder -based alloy and ZAXE1711 (both from Japan) were produced using a Spinning Water Atomization Process (SWAP) to yield powder particles with...and ZAXE1711 Mg alloy powders and (b) morphology of coarse Mg alloy powder prepared by SWAP

International Assessment of Research and Development in Catalysis by Nanostructured Materials

DTIC Science & Technology

2009-01-01

beam was parallel to the [011] zone axis of Cu (Hansen et al . 2002). Renu Sharma 51 Redox Process Ceria-based oxides are commonly used as supports for... deposition of Al (OH)6Mo6O18 3- on the Al2O3 surface....................................................... 336 D.51. Schematic illustration of the...materials with unique properties at the ITQ in Valencia, Spain. Also, the Center for Microchemical Process Systems at KAIST in Korea makes extensive use

40 CFR 86.884-9 - Smoke measurement system.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Schematic drawing. The Figure I84-1 is a schematic drawing of the optical system of the light extinction... the exhaust from the test site. (2) Smokemeter (light extinction meter)—continuous recording, full...) Light extinction meters employing substantially identical measurement principles and producing...

30 CFR 252.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... fossil content, core analyses, laboratory analyses of physical and chemical properties, logs or charts of... geological information means knowledge, often in the form of schematic cross sections and maps, developed by... geophysical information means knowledge, often in the form of schematic cross sections and maps, developed by...

Application of two-dimensional binary fingerprinting methods for the design of selective Tankyrase I inhibitors.

PubMed

Muddukrishna, B S; Pai, Vasudev; Lobo, Richard; Pai, Aravinda

2017-11-22

In the present study, five important binary fingerprinting techniques were used to model novel flavones for the selective inhibition of Tankyrase I. From the fingerprints used: the fingerprint atom pairs resulted in a statistically significant 2D QSAR model using a kernel-based partial least square regression method. This model indicates that the presence of electron-donating groups positively contributes to activity, whereas the presence of electron withdrawing groups negatively contributes to activity. This model could be used to develop more potent as well as selective analogues for the inhibition of Tankyrase I. Schematic representation of 2D QSAR work flow.

Extension of Viscoplasticity Based on Overstress to Capture the Effects of Prior Aging on the Time Dependent Deformation Behavior of a High-Temperature Polymer: Experiments and Modeling

DTIC Science & Technology

2008-10-01

the standard model characterization procedure is based on creep and recovery tests, where loading and unloading occurs at a fast rate of 1.0 MPa/s...σ − g[ǫ] and on d̊g[ǫ] dǫ = E, where g̊ is defined as the equilibrium stress g[ ] for extremely fast loading. For this case, the stress-strain curves...Strain S tr es s Strain Rate Slow Strain Rate Medium Strain Rate Fast Plastic Flow Fully Established Figure 2.10: Stress Strain Curve Schematic

Central receiver solar thermal power system, Phase 1. CDRL item 2. Pilot plant preliminary design report. Volume VI. Electrical power generation and master control subsystems and balance of plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hallet, Jr., R. W.; Gervais, R. L.

1977-10-01

The requirements, performance, and subsystem configuration for both the Commercial and Pilot Plant electrical power generation subsystems (EPGS) and balance of plants are presented. The EPGS for both the Commercial Plant and Pilot Plant make use of conventional, proven equipment consistent with good power plant design practices in order to minimize risk and maximize reliability. The basic EPGS cycle selected is a regenerative cycle that uses a single automatic admission, condensing, tandem-compound double-flow turbine. Specifications, performance data, drawings, and schematics are included. (WHK)

The Effects of Realism in Learning with Dynamic Visualizations

ERIC Educational Resources Information Center

Scheiter, Katharina; Gerjets, Peter; Huk, Thomas; Imhof, Birgit; Kammerer, Yvonne

2009-01-01

Two experiments are reported that investigated the relative effectiveness of a realistic dynamic visualization as opposed to a schematic visualization for learning about cell replication (mitosis). In Experiment 1, 37 university students watched either realistic or schematic visualizations. Students' subjective task demands ratings as well as…

Hybrid Organic-Inorganic Films Grown Using Molecular Layer Deposition

DTIC Science & Technology

2011-03-01

shown that zincone films based on DEZ and hydroquinone (HQ) have displayed some conductivity when alloyed with ZnO ALD films [35]. The schematic...11 Schematic showing the two-step reaction sequence for AB zincone MLD growth using diethylzinc (DEZ) and hydroquinone (HQ). The hybrid organic

Differentiating true and false schematic memories in older adults.

PubMed

Webb, Christina E; Dennis, Nancy A

2018-02-06

While schemas aid memory for schematically related information, the gist induced by the schema can also lead to high rates of false memories, especially in older adults. The neural mechanisms that support and differentiate true and false memories in aging are not well understood. The current study sought to clarify this, using a novel scene paradigm to investigate the role of schemas on true and false memories in older adults. Healthy older adults encoded schematic scenes (e.g., bathroom). At retrieval, participants were tested on their memory for both schematic and non-schematic targets and lures while fMRI data was collected. Results indicate that true memories were supported by the typical retrieval network, and activity in this network was greater for true than false memories. Schema specific retrieval was supported by mPFC, extending this common finding to aging. While no region differentiated false memories compared to correct rejections, results showed that individual differences in false memory rates were associated with variability in neural activity. The findings underscore the importance of elucidating the neural basis of cognition within older adults, as well as the specific contribution of individual differences to the neural basis of memory errors in aging. © The Author(s) 2018. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Children's and Adults' Recall of Sex-Stereotyped Toy Pictures: Effects of Presentation and Memory Task

ERIC Educational Resources Information Center

Cherney, Isabelle D.

2005-01-01

Gender schema theories predict a memory bias toward sex-congruent information. The present study examined how presentation of stimuli and encoding conditions influence gender schematic processing in children and adults. One hundred and sixty 5- to 13-year olds and adult males and females viewed 36 sex-stereotyped toy pictures that were presented…

Current Trends in Ubiquitous Biosensing

DTIC Science & Technology

2013-08-01

fundamental advances have been made in the synergistic combination of research in the fields of microfluidics and optics, coined “optofluidics” [24-26...microfabrication and clean-room techniques for the development of microfluidic devices [27]. Advances in the rapid fabrication of nano- and microfluidic ...Transduction Microfluidic Processing Sample Introduction Optofluidics Enabled Bio-Sensing A B C Figure 4: (A) Schematic diagram of optofluidic tomography

Properties of Organic Matrix Short Fiber Composites

DTIC Science & Technology

1982-02-01

reinforced SMC composites ( Owens Corning Fiberglas System) ............... ........................ ... 37 4 Schematic of process used to manufacture XMC...71 Vi F, viii. TLST OF TABLES TABLEPAE 1 Material formulations and densitius of SMC materials (PPG-PPG Industries, OFC- Owens Corning Fiberglas) (refs...Composite Materials, 14 (April 1980) , 142-154. 16 ,. Table 1. Material formulations and densities of SMC materials. (PPG-PPG Industries, OFC- Owens

Estimating Nitrogen Loading in the Wabash River Subwatershed Using a GIS Schematic Processing Network in Support of Sustainable Watershed Management Planning

EPA Science Inventory

The Wabash River is a tributary of the Ohio River. This river system consists of headwaters and small streams, medium river reaches in the upper Wabash watershed, and large river reaches in the lower Wabash watershed. A large part of the river system is situated in agricultural a...

Schematizing and Processing Informational Texts with Mind Maps in Fifth and Sixth Grade

ERIC Educational Resources Information Center

Merchie, Emmelien; Van Keer, Hilde

2013-01-01

From the age of 11-13, children start to spend increasingly more time on learning from texts. The need arises to support them in dealing with this text information and engaging them in self-regulated learning (SRL). This study is embedded within the cognitive component of SRL and focuses on mind mapping as a promising organizational learning…

An examination of flame shape related to convection heat transfer in deep-fuel beds

Treesearch

Kara M. Yedinak; Jack D. Cohen; Jason M. Forthofer; Mark A. Finney

2010-01-01

Fire spread through a fuel bed produces an observable curved combustion interface. This shape has been schematically represented largely without consideration for fire spread processes. The shape and dynamics of the flame profile within the fuel bed likely reflect the mechanisms of heat transfer necessary for the pre-heating and ignition of the fuel during fire spread....

Language, Perception, and the Schematic Representation of Spatial Relations

ERIC Educational Resources Information Center

Amorapanth, Prin; Kranjec, Alexander; Bromberger, Bianca; Lehet, Matthew; Widick, Page; Woods, Adam J.; Kimberg, Daniel Y.; Chatterjee, Anjan

2012-01-01

Schemas are abstract nonverbal representations that parsimoniously depict spatial relations. Despite their ubiquitous use in maps and diagrams, little is known about their neural instantiation. We sought to determine the extent to which schematic representations are neurally distinguished from language on the one hand, and from rich perceptual…

Signs, Symbols and Schemas: Understanding Meaning in a Child's Drawings

ERIC Educational Resources Information Center

Deguara, Jo; Nutbrown, Cathy

2018-01-01

This paper examines the schematic underpinnings in the drawings of a four-year-old girl, Thea. The paper reviews literature on graphic representations, signs and meaning-making before discussing schematic "form" in children's drawings, the theoretical background for the study. The paper discusses ethical issues and methodological…

Magnetogama: an open schematic magnetometer

NASA Astrophysics Data System (ADS)

Wahyudi; Khakhim, Nurul; Kuntoro, Tri; Mardiatno, Djati; Rakhman, Afif; Setyo Handaru, Anas; Akhmad Mufaqih, Adien; Marwan Irnaka, Theodosius

2017-09-01

Magnetogama is an open schematic hand-assembled fluxgate magnetometer. Compared to another magnetometer, Magnetogama has more benefit concerning its price and its ease of use. Practically Magnetogama can be utilized either in land or attached to an unmanned aerial vehicle (UAV). Magnetogama was designed to give open access to a cheap and accurate alternative to magnetometer sensor. Therefore it can be used as a standard design which is directly applicable to the low-budget company or education purposes. Schematic, code and several verification tests were presented in this article ensuring its reproducibility. Magnetogama has been tested with two kind of tests: a comparison with two nearest observatories at Learmonth (LRM) and Kakadu (KDU) and the response of magnetic substance.

Recognition of Schematic Facial Displays of Emotion in Parents of Children with Autism

ERIC Educational Resources Information Center

Palermo, Mark T.; Pasqualetti, Patrizio; Barbati, Giulia; Intelligente, Fabio; Rossini, Paolo Maria

2006-01-01

Performance on an emotional labeling task in response to schematic facial patterns representing five basic emotions without the concurrent presentation of a verbal category was investigated in 40 parents of children with autism and 40 matched controls. "Autism fathers" performed worse than "autism mothers," who performed worse than controls in…

Students' Individual Schematization Pathways--Empirical Reconstructions for the Case of Part-of-Part Determination for Fractions

ERIC Educational Resources Information Center

Glade, Matthias; Prediger, Susanne

2017-01-01

According to the design principle of progressive schematization, learning trajectories towards procedural rules can be organized as independent discoveries when the learning arrangement invites the students first to develop models for mathematical concepts and model-based informal strategies; then to explore the strategies and to discover pattern…

Realistic versus Schematic Interactive Visualizations for Learning Surveying Practices: A Comparative Study

ERIC Educational Resources Information Center

Dib, Hazar; Adamo-Villani, Nicoletta; Garver, Stephen

2014-01-01

Many benefits have been claimed for visualizations, a general assumption being that learning is facilitated. However, several researchers argue that little is known about the cognitive value of graphical representations, be they schematic visualizations, such as diagrams or more realistic, such as virtual reality. The study reported in the paper…

Presenting Lexical Bundles for Explicit Noticing with Schematic Linguistic Representation

ERIC Educational Resources Information Center

Thomson, Haidee Elizabeth

2016-01-01

Lexical bundles are essential for fluency, but their incompleteness is a stumbling block for learners. In this study, two presentation methods to increase awareness of lexical bundles through explicit noticing are explored and compared with incidental exposure. The three conditions in this study were as follows: noticing with schematic linguistic…

Solar Schematic

NASA Technical Reports Server (NTRS)

1979-01-01

The home shown at right is specially designed to accommodate solar heating units; it has roof planes in four directions, allowing placement of solar collectors for best exposure to the sun. Plans (bottom) and complete working blueprints for the solar-heated house are being marketed by Home Building Plan Service, Portland, Oregon. The company also offers an inexpensive schematic (center) showing how a homeowner only moderately skilled in the use of tools can build his own solar energy system, applicable to new or existing structures. The schematic is based upon the design of a low-cost solar home heating system built and tested by NASA's Langley Research Center; used to supplement a warm-air heating system, it can save the homeowner about 40 percent of his annual heating bill for a modest investment in materials and components. Home Building Plan Service saved considerable research time by obtaining a NASA technical report which details the Langley work. The resulting schematic includes construction plans and simplified explanations of solar heat collection, collectors and other components, passive heat factors, domestic hot water supply and how to work with local heating engineers.

The role of appearance schematicity in the internalization of media appearance ideals: A panel study of preadolescents.

PubMed

Rousseau, Ann; Gamble, Hilary; Eggermont, Steven

2017-10-01

Individuals who are more strongly invested in their appearance, appearance schematics, have a tendency to engage in appearance-related comparison. Appearance schematicity consists of two components. The self-evaluative component concerns the degree to which appearance is central to self-worth, referred to as dysfunctional appearance beliefs. Motivational salience refers to the engagement in behaviors designed to enhance appearance, such as body surveillance. Based on a three-wave panel survey of 973 Flemish preadolescents (M age  = 11.15, SD = 1.13) we found that the motivational and self-evaluative components had a different impact on media internalization. For preadolescents who engaged in more body surveillance, watching television resulted in more media internalization. For preadolescents who had fewer dysfunctional appearance beliefs, watching television resulted in more media internalization. These findings suggest that appearance schematicity is an important susceptibility variable in the relationship between TV-exposure and media internalization, and emphasize the importance of investigating individual dispositions beyond gender differences. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Visual verification and analysis of cluster detection for molecular dynamics.

PubMed

Grottel, Sebastian; Reina, Guido; Vrabec, Jadran; Ertl, Thomas

2007-01-01

A current research topic in molecular thermodynamics is the condensation of vapor to liquid and the investigation of this process at the molecular level. Condensation is found in many physical phenomena, e.g. the formation of atmospheric clouds or the processes inside steam turbines, where a detailed knowledge of the dynamics of condensation processes will help to optimize energy efficiency and avoid problems with droplets of macroscopic size. The key properties of these processes are the nucleation rate and the critical cluster size. For the calculation of these properties it is essential to make use of a meaningful definition of molecular clusters, which currently is a not completely resolved issue. In this paper a framework capable of interactively visualizing molecular datasets of such nucleation simulations is presented, with an emphasis on the detected molecular clusters. To check the quality of the results of the cluster detection, our framework introduces the concept of flow groups to highlight potential cluster evolution over time which is not detected by the employed algorithm. To confirm the findings of the visual analysis, we coupled the rendering view with a schematic view of the clusters' evolution. This allows to rapidly assess the quality of the molecular cluster detection algorithm and to identify locations in the simulation data in space as well as in time where the cluster detection fails. Thus, thermodynamics researchers can eliminate weaknesses in their cluster detection algorithms. Several examples for the effective and efficient usage of our tool are presented.

Historical evolution of a micro-tidal lagoon simulated by a 2-D schematic model

NASA Astrophysics Data System (ADS)

Bonaldo, D.; Di Silvio, G.

2013-11-01

Coastal transitional environments such as estuaries, coastal inlets and tidal lagoons are the result of the interaction of several exogenous forcing factors (e.g. tidal regime, local wind and wave climate, sea-level rise, sediment supply) many of which are, in principle, variable in time over historical and geological timescales. Besides the natural variability of the external constraints, human interventions in some components of the system can either directly or indirectly affect long-term sediment dynamics in the whole system. In this paper the evolution of a schematic tidal basin, with non-uniform sediments and subject to geological and anthropogenic processes, is reproduced by means of a two dimensional morphodynamic model and qualitatively compared to the events which historically took place in the Venice Lagoon during the last four centuries; the trend for the next 200 years is also investigated. In particular, the effect on both morphology and bottom composition of river diversion, jetty construction, human-induced subsidence and channel dredging are presented and discussed.

Analysis of In-Canyon Flow Characterisitcs in step-up street canyons

NASA Astrophysics Data System (ADS)

PARK, S.; Kim, J.; Choi, W.; Pardyjak, E.

2017-12-01

Flow characteristics in strep-up street canyons were investigated focusing on in-canyon region. To see the effects of the building geometry, two building height ratios [ratio of the upwind (Hu) to downwind building heights (Hd) = 0.33, 0.6] were considered and eight building length ratios [ratio of the cross-wind building length (L) to street-canyon width (S) from 0.5 to 4 with the increment of 0.5] were systematically changed. For the model validation, the simulated results were compared with the wind- tunnel data measured for Hu/Hd = 0.33, 0.6 and L/S = 1, 2, 3, and 4. In the CFD model simulations, the corner vortices at the downwind side near the ground level and the recirculation zones above the downwind buildings had the relatively small extents, compared with those in the wind-tunnel experiments. However, the CFD model reproduced the main flow features such as the street-canyon vortices, circulations above the building roof, and the positions of the stagnation points on the downwind building walls in the wind-tunnel experiments reasonably well. By further analyzing the three-dimensional flow structures based on the numerical results simulated in the step-up street canyons, we schematically suggested the flow characteristics with different building-height and building-length ratios.

Application of 3-Dimensional Printing Technology to Construct an Eye Model for Fundus Viewing Study

PubMed Central

Li, Xinhua; Gao, Zhishan; Yuan, Dongqing; Liu, Qinghuai

2014-01-01

Objective To construct a life-sized eye model using the three-dimensional (3D) printing technology for fundus viewing study of the viewing system. Methods We devised our schematic model eye based on Navarro's eye and redesigned some parameters because of the change of the corneal material and the implantation of intraocular lenses (IOLs). Optical performance of our schematic model eye was compared with Navarro's schematic eye and other two reported physical model eyes using the ZEMAX optical design software. With computer aided design (CAD) software, we designed the 3D digital model of the main structure of the physical model eye, which was used for three-dimensional (3D) printing. Together with the main printed structure, polymethyl methacrylate(PMMA) aspherical cornea, variable iris, and IOLs were assembled to a physical eye model. Angle scale bars were glued from posterior to periphery of the retina. Then we fabricated other three physical models with different states of ammetropia. Optical parameters of these physical eye models were measured to verify the 3D printing accuracy. Results In on-axis calculations, our schematic model eye possessed similar size of spot diagram compared with Navarro's and Bakaraju's model eye, much smaller than Arianpour's model eye. Moreover, the spherical aberration of our schematic eye was much less than other three model eyes. While in off- axis simulation, it possessed a bit higher coma and similar astigmatism, field curvature and distortion. The MTF curves showed that all the model eyes diminished in resolution with increasing field of view, and the diminished tendency of resolution of our physical eye model was similar to the Navarro's eye. The measured parameters of our eye models with different status of ametropia were in line with the theoretical value. Conclusions The schematic eye model we designed can well simulate the optical performance of the human eye, and the fabricated physical one can be used as a tool in fundus range viewing research. PMID:25393277

Application of 3-dimensional printing technology to construct an eye model for fundus viewing study.

PubMed

Xie, Ping; Hu, Zizhong; Zhang, Xiaojun; Li, Xinhua; Gao, Zhishan; Yuan, Dongqing; Liu, Qinghuai

2014-01-01

To construct a life-sized eye model using the three-dimensional (3D) printing technology for fundus viewing study of the viewing system. We devised our schematic model eye based on Navarro's eye and redesigned some parameters because of the change of the corneal material and the implantation of intraocular lenses (IOLs). Optical performance of our schematic model eye was compared with Navarro's schematic eye and other two reported physical model eyes using the ZEMAX optical design software. With computer aided design (CAD) software, we designed the 3D digital model of the main structure of the physical model eye, which was used for three-dimensional (3D) printing. Together with the main printed structure, polymethyl methacrylate(PMMA) aspherical cornea, variable iris, and IOLs were assembled to a physical eye model. Angle scale bars were glued from posterior to periphery of the retina. Then we fabricated other three physical models with different states of ammetropia. Optical parameters of these physical eye models were measured to verify the 3D printing accuracy. In on-axis calculations, our schematic model eye possessed similar size of spot diagram compared with Navarro's and Bakaraju's model eye, much smaller than Arianpour's model eye. Moreover, the spherical aberration of our schematic eye was much less than other three model eyes. While in off- axis simulation, it possessed a bit higher coma and similar astigmatism, field curvature and distortion. The MTF curves showed that all the model eyes diminished in resolution with increasing field of view, and the diminished tendency of resolution of our physical eye model was similar to the Navarro's eye. The measured parameters of our eye models with different status of ametropia were in line with the theoretical value. The schematic eye model we designed can well simulate the optical performance of the human eye, and the fabricated physical one can be used as a tool in fundus range viewing research.

Prevalence of refractive errors in the Slovak population calculated using the Gullstrand schematic eye model.

PubMed

Popov, I; Valašková, J; Štefaničková, J; Krásnik, V

2017-01-01

A substantial part of the population suffers from some kind of refractive errors. It is envisaged that their prevalence may change with the development of society. The aim of this study is to determine the prevalence of refractive errors using calculations based on the Gullstrand schematic eye model. We used the Gullstrand schematic eye model to calculate refraction retrospectively. Refraction was presented as the need for glasses correction at a vertex distance of 12 mm. The necessary data was obtained using the optical biometer Lenstar LS900. Data which could not be obtained due to the limitations of the device was substituted by theoretical data from the Gullstrand schematic eye model. Only analyses from the right eyes were presented. The data was interpreted using descriptive statistics, Pearson correlation and t-test. The statistical tests were conducted at a level of significance of 5%. Our sample included 1663 patients (665 male, 998 female) within the age range of 19 to 96 years. Average age was 70.8 ± 9.53 years. Average refraction of the eye was 2.73 ± 2.13D (males 2.49 ± 2.34, females 2.90 ± 2.76). The mean absolute error from emmetropia was 3.01 ± 1.58 (males 2.83 ± 2.95, females 3.25 ± 3.35). 89.06% of the sample was hyperopic, 6.61% was myopic and 4.33% emmetropic. We did not find any correlation between refraction and age. Females were more hyperopic than males. We did not find any statistically significant hypermetopic shift of refraction with age. According to our estimation, the calculations of refractive errors using the Gullstrand schematic eye model showed a significant hypermetropic shift of more than +2D. Our results could be used in future for comparing the prevalence of refractive errors using same methods we used.Key words: refractive errors, refraction, Gullstrand schematic eye model, population, emmetropia.

MATLAB/Simulink Framework for Modeling Complex Coolant Flow Configurations of Advanced Automotive Thermal Management Systems: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Titov, Eugene; Lustbader, Jason; Leighton, Daniel

The National Renewable Energy Laboratory's (NREL's) CoolSim MATLAB/Simulink modeling framework was extended by including a newly developed coolant loop solution method aimed at reducing the simulation effort for arbitrarily complex thermal management systems. The new approach does not require the user to identify specific coolant loops and their flow. The user only needs to connect the fluid network elements in a manner consistent with the desired schematic. Using the new solution method, a model of NREL's advanced combined coolant loop system for electric vehicles was created that reflected the test system architecture. This system was built using components provided bymore » the MAHLE Group and included both air conditioning and heat pump modes. Validation with test bench data and verification with the previous solution method were performed for 10 operating points spanning a range of ambient temperatures between -2 degrees C and 43 degrees C. The largest root mean square difference between pressure, temperature, energy and mass flow rate data and simulation results was less than 7%.« less

MATLAB/Simulink Framework for Modeling Complex Coolant Flow Configurations of Advanced Automotive Thermal Management Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Titov, Gene; Lustbader, Jason; Leighton, Daniel

The National Renewable Energy Laboratory's (NREL's) CoolSim MATLAB/Simulink modeling framework was extended by including a newly developed coolant loop solution method aimed at reducing the simulation effort for arbitrarily complex thermal management systems. The new approach does not require the user to identify specific coolant loops and their flow. The user only needs to connect the fluid network elements in a manner consistent with the desired schematic. Using the new solution method, a model of NREL's advanced combined coolant loop system for electric vehicles was created that reflected the test system architecture. This system was built using components provided bymore » the MAHLE Group and included both air conditioning and heat pump modes. Validation with test bench data and verification with the previous solution method were performed for 10 operating points spanning a range of ambient temperatures between -2 degrees C and 43 degrees C. The largest root mean square difference between pressure, temperature, energy and mass flow rate data and simulation results was less than 7%.« less

Ceramic Fiber Coatings Development and Demonstration

DTIC Science & Technology

1993-05-28

from polycar- bosilane polymer . The fiber is mostly amorphous with some microcrystalline beta- SiC . A typical elemental composition (wt %) is 57... preceramic polymers yielded improvements mainly for oxide coatings and proved particularly promising for low cost processing. A schematic for this...deposition. COMPOSITE FABRICATION AND EVALUATION Coated fiber tows were infiltrated with Si 3N4 matrix by chemical vapor deposition in order to study

Design and fabrication of a CCD camera for use with relay optics in solar X-ray astronomy

NASA Technical Reports Server (NTRS)

1984-01-01

Configured as a subsystem of a sounding rocket experiment, a camera system was designed to record and transmit an X-ray image focused on a charge coupled device. The camera consists of a X-ray sensitive detector and the electronics for processing and transmitting image data. The design and operation of the camera are described. Schematics are included.

Proceedings of the 1983 Scientific Conference on Obscuration and Aerosol Research

DTIC Science & Technology

1984-07-01

Aerosol Measurement Spheroids Laser Pulses Target Signatures Optical Pulses Pulse Propagation Clouds Laser Radiation Transport Analysis...Schematic diagram of apparatus used to make ATR measurements . (a) Top view of components. Solid line is path of laser radiation, broken line is path of...fabricated to measure the extinction properties of these materials for CO2 laser radiation. The selection process and preparation of the

Reconfigurable Cellular Photonic Crystal Arrays (RCPA)

DTIC Science & Technology

2013-03-01

signal processing based on reconfigurable integrated optics devices. This technology has the potential to revolutionize the design circle of optical...Accomplishments III.A. Design and fabrication of an accumulation-mode modulator Figure 1(a) shows the schematic of a compact resonator on the double-Si... integration of silicon nitride on silicon-on-insulator platform to enhance the arsenal of photonic circuit designers . The coherent integration of

The Wernicke area

PubMed Central

2015-01-01

The term “Wernicke's area” is most often used as an anatomical label for the gyri forming the lower posterior left sylvian fissure. Although traditionally this region was held to support language comprehension, modern imaging and neuropsychological studies converge on the conclusion that this region plays a much larger role in speech production. This evidence is briefly reviewed, and a simple schematic model of posterior cortical language processing is described. PMID:26567270

Schematic interactions with many degeneracies

NASA Astrophysics Data System (ADS)

Kingan, Arun; Quinonez, Michael; Zamick, Larry

In previous works, we examined the spectra for systems of two protons and two neutrons, in a single j shell calculation, by obtaining matrix elements from experiment. More recently, we considered the schematic interactions in the same model space. We continue in this vein here. The present work and the former can be regarded as two bookends on a bookshelf.

X-ray Sensitive Material

DTIC Science & Technology

2015-12-01

The research resulted in a composite material that holds a quasi-permanent electric charge and rapidly discharges the electric charge upon X-ray...quasi-permanent electric charge and rapidly discharge the electric charge upon X-ray exposure. The composite material combined the properties of an...9 7. Schematic of Circuit for Recording Sample’s Capacitor Discharge ............... 12 8. Schematic of Circuit for

Active Noise and Vibration Control Literature Survey: Controller Technologies

DTIC Science & Technology

1999-11-01

5.4 Schematic Flowchart of System Identification [Soderstrom, 1989] ................. 5. 7 Measurement System (open-loop...approaches: measurement systems and transfer functions identification [Norton, 1986]. The following figure illustrates the general flowchart ...data SCI Figure 5.3. Schematic flowchart of system identification [Soderstrom, 1989] 5.7 The first type of identification {see Figure 5.4) uses open

Comparative Study of the Effectiveness of Three Learning Environments: Hyper-Realistic Virtual Simulations, Traditional Schematic Simulations and Traditional Laboratory

ERIC Educational Resources Information Center

Martinez, Guadalupe; Naranjo, Francisco L.; Perez, Angel L.; Suero, Maria Isabel; Pardo, Pedro J.

2011-01-01

This study compared the educational effects of computer simulations developed in a hyper-realistic virtual environment with the educational effects of either traditional schematic simulations or a traditional optics laboratory. The virtual environment was constructed on the basis of Java applets complemented with a photorealistic visual output.…

Influences of Source-Item Contingency and Schematic Knowledge on Source Monitoring: Tests of the Probability-Matching Account

ERIC Educational Resources Information Center

Bayen, Ute J.; Kuhlmann, Beatrice G.

2011-01-01

The authors investigated conditions under which judgments in source-monitoring tasks are influenced by prior schematic knowledge. According to a probability-matching account of source guessing (Spaniol & Bayen, 2002), when people do not remember the source of information, they match source-guessing probabilities to the perceived contingency…

Proposed Schematics for an Advanced Development Lunar Portable Life Support System

NASA Technical Reports Server (NTRS)

Conger, Bruce; Chullen, Cinda; Barnes, Bruce; Leavitt, Greg

2010-01-01

The latest development of the NASA space suit is an integrated assembly made up of primarily a Pressure Garment System (PGS) and a Portable Life Support System (PLSS). The PLSS is further composed of an oxygen (O2) subsystem, a ventilation subsystem, and a thermal subsystem. This paper baselines a detailed schematic of the PLSS to provide a basis for current and future PLSS development efforts. Both context diagrams and detailed schematics describe the hardware components and overall functions for all three of the PLSS subsystems. The various modes of operations for the PLSS are also presented. A comparison of the proposed PLSS to the Apollo and Shuttle PLSS designs is presented, highlighting several anticipated improvements over the historical PLSS architectures.

Multi-kilowatt modularized spacecraft power processing system development

NASA Technical Reports Server (NTRS)

Andrews, R. E.; Hayden, J. H.; Hedges, R. T.; Rehmann, D. W.

1975-01-01

A review of existing information pertaining to spacecraft power processing systems and equipment was accomplished with a view towards applicability to the modularization of multi-kilowatt power processors. Power requirements for future spacecraft were determined from the NASA mission model-shuttle systems payload data study which provided the limits for modular power equipment capabilities. Three power processing systems were compared to evaluation criteria to select the system best suited for modularity. The shunt regulated direct energy transfer system was selected by this analysis for a conceptual design effort which produced equipment specifications, schematics, envelope drawings, and power module configurations.

Photoacoustic-fluorescence in vitro flow cytometry for quantification of absorption, scattering and fluorescence properties of the cells

NASA Astrophysics Data System (ADS)

Nedosekin, D. A.; Sarimollaoglu, M.; Foster, S.; Galanzha, E. I.; Zharov, V. P.

2013-03-01

Fluorescence flow cytometry is a well-established analytical tool that provides quantification of multiple biological parameters of cells at molecular levels, including their functional states, morphology, composition, proliferation, and protein expression. However, only the fluorescence and scattering parameters of the cells or labels are available for detection. Cell pigmentation, presence of non-fluorescent dyes or nanoparticles cannot be reliably quantified. Herewith, we present a novel photoacoustic (PA) flow cytometry design for simple integration of absorbance measurements into schematics of conventional in vitro flow cytometers. The integrated system allow simultaneous measurements of light absorbance, scattering and of multicolor fluorescence from single cells in the flow at rates up to 2 m/s. We compared various combinations of excitation laser sources for multicolor detection, including simultaneous excitation of PA and fluorescence using a single 500 kHz pulsed nanosecond laser. Multichannel detection scheme allows simultaneous detection of up to 8 labels, including 4 fluorescent tags and 4 PA colors. In vitro PA-fluorescence flow cytometer was used for studies of nanoparticles uptake and for the analysis of cell line pigmentation, including genetically encoded melanin expression in breast cancer cell line. We demonstrate that this system can be used for direct nanotoxicity studies with simultaneous quantification of nanoparticles content and assessment of cell viability using a conventional fluorescent apoptosis assays.

Hot deformation behaviors and processing maps of B{sub 4}C/Al6061 neutron absorber composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Yu-Li

In this study, the hot deformation behaviors of 30 wt.% B{sub 4}C/Al6061 neutron absorber composites (NACs) have been investigated by conducting isothermal compression tests at temperatures ranging from 653 K to 803 K and strain rates from 0.01 to 10 s{sup −1}. It was found that, during hot compression, the B{sub 4}C/Al6061 NACs exhibited a steady flow characteristic which can be expressed by the Zener-Hollomon parameter as a hyperbolic-sine function of flow stress. High average activation energy (185.62 kJ/mol) of B{sub 4}C/Al6061 NACs is noted in current study owing to the high content of B{sub 4}C particle. The optimum hotmore » working conditions for B{sub 4}C/Al6061 NACs are found to be 760–803 K/0.01–0.05 s{sup −1} based on processing map and microstructure evolution. Typical material instabilities are thought to be attributed to void formation, adiabatic shear bands (ASB), particle debonding, and matrix cracking. Finally, the effect of the plastic deformation zones (PDZs) on the microstructure evolution in this 30 wt.% B{sub 4}C/Al6061 composite is found to be very important. - Highlights: •The hot deformation behavior of the 30 wt.% B{sub 4}C/Al6061 NACs was first analyzed. •The 3D efficiency map and the instability map are developed. •The optimum hot working conditions were identified and validated by SEM and TEM. •The hot deformation schematic diagram of 30 wt.% B{sub 4}C/Al6061 NACs is developed.« less

A Close Loop Low-Power and High Speed 130 nm CMOS Sample and Hold Circuit Based on Switched Capacitor for ADC Module

NASA Astrophysics Data System (ADS)

Nasir, Z.; Ruslan, S. H.

2017-08-01

A sample and hold (S/H) block is typically used as an analogue to digital interface in the analogue to digital converter (ADC) system. Since ADC is widely used in processing signals, the power consumption of the ADC must be lowered to conserve energy. Therefore the S/H circuit must be of a low powered too. Sampling phase and hold phase are the two phases of the operation cycle of the S/H circuit. Switched capacitor (SC) techniques have been developed in order to allow the integration on a single silicon chip of both digital and analogue functions. By controlling switches around the SC, the SC circuit works by passing charge into and out of a capacitor. SC circuits are suitable for on chip implementations because they replace a resistor with switches and capacitors. In this research, a closed-loop sample and hold circuit based on SC is designed and simulated with Cadence EDA tools. The schematic, layout, and simulation of the circuit is done using generic Silterra 130 nm technology file. All the analysis is done using Virtuoso Analog Design Environment. Layout and schematic are drawn using Virtuoso Schematic Editor and Virtuoso Layout Editor, Calibre is used for post layout simulation. The closed loop S/H circuit based on SC is successfully designed and able to sample and hold the analogue input waveform. The power consumption of the circuit is 0.919 mW and the propagation delay is 64.96 ps.

Semiotic Activity of Young Children in Play: The Construction and Use of Schematic Representations.

ERIC Educational Resources Information Center

van Oers, Bert

1994-01-01

Examined four- through six-year olds' ability to diagram the configuration of a toy railway set they had assembled and to reconstruct the railway based on drawings. Found that motivation had a significant influence on the accuracy of drawings. Results suggest that semiotic activity with the help of schematic representations or drawings is in the…

16 CFR Figure 4 to Subpart A of... - Flooring Radiant Panel Tester Schematic Low Flux End, Elevation

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Flooring Radiant Panel Tester Schematic Low Flux End, Elevation 4 Figure 4 to Subpart A of Part 1209 Commercial Practices CONSUMER PRODUCT SAFETY... Standard Pt. 1209, Subpt. A, Fig. 4 Figure 4 to Subpart A of Part 1209—Flooring Radiant Panel Tester...

Perceptual Grouping, Not Emotion, Accounts for Search Asymmetries with Schematic Faces

ERIC Educational Resources Information Center

Becker, Stefanie I.; Horstmann, Gernot; Remington, Roger W.

2011-01-01

Several different explanations have been proposed to account for the search asymmetry (SA) for angry schematic faces (i.e., the fact that an angry face target among friendly faces can be found faster than vice versa). The present study critically tested the perceptual grouping account, (a) that the SA is not due to emotional factors, but to…

Teaching High School Students with Learning Disabilities to Use Model Drawing Strategy to Solve Fraction and Percentage Word Problems

ERIC Educational Resources Information Center

Dennis, Minyi Shih; Knight, Jacqueline; Jerman, Olga

2016-01-01

This article describes how to teach fraction and percentage word problems using a model-drawing strategy. This cognitive strategy places emphasis on explicitly teaching students how to draw a schematic diagram to represent the qualitative relations described in the problem, and how to formulate the solution based on the schematic diagram. The…

Assembly and Design Miniaturization of Floating Spacecraft Simulator and Its Magnetic Docking Interface

DTIC Science & Technology

2016-09-01

Lithium Ion Battery Pack. Source: [13]. .....................................................................................16 Figure 17. BB-04SR...reducing friction. Figure 5. FSS Pneumatic Schematic Figure 6 illustrates the electrical schematic of the FSS. Two lithium - ion batteries ...D. MAJOR COMPONENTS FOR ELECTRICAL SYSTEM 1. Portable Battery Two rechargeable smart lithium ion battery packs (see Figure 16) are used to power

Teaching Addition and Subtraction Operations with Schematic Place-Value Learning Aids & the Impact on Arithmetic Competency

ERIC Educational Resources Information Center

Kyriakidou-Christofidou, Athina

2016-01-01

The present mixed-methods quasi-experimental study (embedding a case study and a mixed factorial within-between ANOVA test), conducted in a private English school in Limassol, Cyprus, investigated how the use of the schematic learning aids (researcher-made color-coded flash-cards and grids) influence year-2 children's ability to read, write and…

Implantable physiologic controller for left ventricular assist devices with telemetry capability.

PubMed

Asgari, Siavash S; Bonde, Pramod

2014-01-01

Rotary type left ventricular assist devices have mitigated the problem of durability associated with earlier pulsatile pumps and demonstrated improved survival. However, the compromise is the loss of pulsatility due to continuous flow and retained percutaneous driveline leading to increased mortality and morbidity. Lack of pulsatility is implicated in increased gastrointestinal bleeding, aortic incompetence, and diastolic hypertension. We present a novel, wirelessly powered, ultra-compact, implantable physiologic controller capable of running a left ventricular assist device in a pulsatile mode with wireless power delivery. The schematic of our system was laid out on a circuit board to wirelessly receive power and run a left ventricular assist device with required safety and backup measures. We have embedded an antenna and wireless network for telemetry. Multiple signal processing steps and controlling algorithm were incorporated. The controller was tested in in vitro and in vivo experiments. The controller drove left ventricular assist devices continuously for 2 weeks in an in vitro setup and in vivo without any failure. Our controller is more power efficient than the current Food and Drug Administration-approved left ventricular assist device controllers. When used with electrocardiography synchronization, the controller allowed on-demand customization of operation with instantaneous flow and revolutions per minute changes, resulting in a pulsatile flow with adjustable pulse pressure. Our test results prove the system to be remarkably safe, accurate, and efficient. The unique combination of wireless powering and small footprint makes this system an ideal totally implantable physiologic left ventricular assist device system. Copyright © 2014 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

MEMORY FOR POETRY: MORE THAN MEANING?

PubMed

Atchley, Rachel M; Hare, Mary L

The assumption has become that memory for words' sound patterns, or form, is rapidly lost in comparison to content. Memory for form is also assumed to be verbatim rather than schematic. Oral story-telling traditions suggest otherwise. The present experiment investigated if form can be remembered schematically in spoken poetry, a context in which form is important. We also explored if sleep could help preserve memory for form. We tested whether alliterative sound patterns could cue memory for poetry lines both immediately and after a delay of 12 hours that did or did not include sleep. Twelve alliterative poetry lines were modified into same alliteration, different alliteration, and no alliteration paraphrases. We predicted that memory for original poetry lines would be less accurate after 12 hours, same alliteration paraphrases would be falsely recognized as originals more often after 12 hours, and that the no-sleep group would make more errors. Different alliteration and no alliteration paraphrases were not expected to share this effect due to schematically different sound patterns. Our data support these hypotheses and provide evidence that memory for form is schematic in nature, retained in contexts in which form matters, and that sleep may help preserve memory for sound patterns.

MEMORY FOR POETRY: MORE THAN MEANING?

PubMed Central

Atchley, Rachel M.; Hare, Mary L.

2015-01-01

The assumption has become that memory for words’ sound patterns, or form, is rapidly lost in comparison to content. Memory for form is also assumed to be verbatim rather than schematic. Oral story-telling traditions suggest otherwise. The present experiment investigated if form can be remembered schematically in spoken poetry, a context in which form is important. We also explored if sleep could help preserve memory for form. We tested whether alliterative sound patterns could cue memory for poetry lines both immediately and after a delay of 12 hours that did or did not include sleep. Twelve alliterative poetry lines were modified into same alliteration, different alliteration, and no alliteration paraphrases. We predicted that memory for original poetry lines would be less accurate after 12 hours, same alliteration paraphrases would be falsely recognized as originals more often after 12 hours, and that the no-sleep group would make more errors. Different alliteration and no alliteration paraphrases were not expected to share this effect due to schematically different sound patterns. Our data support these hypotheses and provide evidence that memory for form is schematic in nature, retained in contexts in which form matters, and that sleep may help preserve memory for sound patterns. PMID:26401226

Ten Triangles around Cavernous Sinus for Surgical Approach, Described by Schematic Diagram and Three Dimensional Models with the Sectioned Images.

PubMed

Chung, Beom Sun; Ahn, Young Hwan; Park, Jin Seo

2016-09-01

For the surgical approach to lesions around the cavernous sinus (CS), triangular spaces around CS have been devised. However, educational materials for learning the triangles were insufficient. The purpose of this study is to present educational materials about the triangles, consisting of a schematic diagram and 3-dimensional (3D) models with sectioned images. To achieve the purposes, other studies were analyzed to establish new definitions and names of the triangular spaces. Learning materials including schematic diagrams and 3D models with cadaver's sectioned images were manufactured. Our new definition was attested by observing the sectioned images and 3D models. The triangles and the four representative surgical approaches were stereoscopically indicated on the 3D models. All materials of this study were put into Portable Document Format file and were distributed freely at our homepage (anatomy.dongguk.ac.kr/triangles). By using our schematic diagram and the 3D models with sectioned images, ten triangles and the related structures could be understood and observed accurately. We expect that our data will contribute to anatomy education, surgery training, and radiologic understanding of the triangles and related structures.

Peroxene Demonstration Performance and Cost Evaluation.

DTIC Science & Technology

1998-04-02

It continuously produced treated effluent approaching drinking water standards before the granular activated carbon (GAC) unit processes, which...Chemistry 63 6.6 Steady State 64 6.7 Future Concept of Operations 65 6.8 Color Development 65 6.9 Optimization 65 6.10 Granular Activated Carbon 66...peroxide to add to the Peroxone system 16 8. Equipment schematic for water sampling 17 9. The treated water 17 10. Three GAC tanks, sodium

Rural Schools Prototype Analysis. Volume II: Methodology. An Example Process of Identifying Determinants, Selecting Options, & Developing Schematic Designs.

ERIC Educational Resources Information Center

Construction Systems Management, Inc., Anchorage, AK.

Volume II of a 3-volume report demonstrates the use of Design Determinants and Options (presented in Volume I) in the planning and design of small rural Alaskan secondary schools. Section I, a checklist for gathering site-specific information to be used as a data base for facility design, is organized in the same format as Volume I, which can be…

Optimal Robust Matching of Engine Models to Test Data

DTIC Science & Technology

2009-02-28

Monte Carlo process 19 Figure 7: Flowchart of SVD Calculations 22 Figure 8: Schematic Diagram of NPSS Engine Model Components 24 Figure 9: PW2037...System Simulation ( NPSS ). NPSS is an object-oriented modeling environment widely used throughout industry and the USAF. With NPSS , the engine is...34 modifiers are available for adjusting the component representations. The scripting language in NPSS allowed for easy implementation of each solution

Autoignition Chemistry of Surrogate Fuel Components in an Engine Environment

DTIC Science & Technology

2015-08-21

compression ratio (CR) on the auto - ignition of decane. Crank angle resolved cylinder pressure data was acquired and analyzed using an engine heat...schematic shown in Fig. 1, consists of a modified CFR (Cooperative Fuel Research) engine coupled to a dynamometer. In practical compression 2 ignition ...engines, auto - ignition occurs in the premixed spray envelope that forms during the fuel injection process. To focus on this regime without the

Development of control system of coating of rod hydraulic cylinders

NASA Astrophysics Data System (ADS)

Aizhambaeva, S. Zh; Maximova, A. V.

2018-01-01

In this article, requirements to materials of hydraulic cylinders and methods of eliminating the main factors affecting the quality of the applied coatings rod hydraulic cylinders. The chromium plating process - one of ways of increase of anti-friction properties of coatings rods, stability to the wear and corrosion. The article gives description of differences of the stand-speed chromium plating process from other types of chromium plating that determines a conclusion about cutting time of chromium plating process. Conducting the analysis of technological equipment suggested addressing the modernization of high-speed chromium plating processes by automation and mechanization. Control system developed by design of schematic block diagram of a modernized and stand-speed chromium plating process.

Inner-outer interactions in a turbulent boundary layer overlying complex roughness

NASA Astrophysics Data System (ADS)

Pathikonda, Gokul; Christensen, Kenneth T.

2017-04-01

Hot-wire measurements were performed in a zero-pressure-gradient turbulent boundary layer overlying both a smooth and a rough wall for the purpose of investigating the details of inner-outer flow interactions. The roughness considered embodies a broad range of topographical scales arranged in an irregular manner and reflects the topographical complexity often encountered in practical flow systems. Single-probe point-wise measurements with a traversing probe were made at two different regions of the rough-wall flow, which was previously shown to be heterogeneous in the spanwise direction, to investigate the distribution of streamwise turbulent kinetic energy and large scale-small scale interactions. In addition, two-probe simultaneous measurements were conducted enabling investigation of inner-outer interactions, wherein the large scales were independently sampled in the outer layer. Roughness-induced changes to the near-wall behavior were investigated, particularly by contrasting the amplitude and frequency modulation effects of inner-outer interactions in the rough-wall flow with well-established smooth-wall flow phenomena. It was observed that the rough-wall flow exhibits both amplitude and frequency modulation features close to the wall in a manner very similar to smooth-wall flow, though the correlated nature of these effects was found to be more intense in the rough-wall flow. In particular, frequency modulation was found to illuminate these enhanced modulation effects in the rough-wall flow. The two-probe measurements helped in evaluating the suitability of the interaction-schematic recently proposed by Baars et al., Exp. Fluids 56, 1 (2015), 10.1007/s00348-014-1876-4 for rough-wall flows. This model was found to be suitable for the rough-wall flow considered herein, and it was found that frequency modulation is a "cleaner" measure of the inner-outer modulation interactions for this rough-wall flow.

Schematic and realistic biological motion identification in children with high-functioning autism spectrum disorder

PubMed Central

Wright, Kristyn; Kelley, Elizabeth; Poulin-Dubois, Diane

2014-01-01

Research investigating biological motion perception in children with ASD has revealed conflicting findings concerning whether impairments in biological motion perception exist. The current study investigated how children with high-functioning ASD (HF-ASD) performed on two tasks of biological motion identification: a novel schematic motion identification task and a point-light biological motion identification task. Twenty-two HFASD children were matched with 21 TD children on gender, non-verbal mental, and chronological, age (M years = 6.72). On both tasks, HF-ASD children performed with similar accuracy as TD children. Across groups, children performed better on animate than on inanimate trials of both tasks. These findings suggest that HF-ASD children's identification of both realistic and schematic biological motion identification is unimpaired. PMID:25395988

Capturing the Initiation and Spatial Variability of Runoff on Soils Affected by Wildfire

NASA Astrophysics Data System (ADS)

Martin, D. A.; Wickert, A. D.; Moody, J. A.

2011-12-01

Rainfall after wildfire often leads to intense runoff and erosion, since fire removes ground cover that impedes overland flow and water is unable to efficiently infiltrate into the fire-affected soils. In order to understand the relation between rainfall, infiltration, and runoff, we modified a camera to be triggered by a rain gage to take time-lapse photographs of the ground surface every 10 seconds until the rain stops. This camera allows us to observe directly the patterns of ground surface ponding, the initiation of overland flow, and erosion/deposition during single rainfall events. The camera was deployed on a hillslope (average slope = 23 degrees) that was severely burned by the 2010 Fourmile Canyon Fire near Boulder, Colorado. The camera's field of view is approximately 3 m2. We integrate the photographs with rainfall and overland flow measurements to determine thresholds for the initiation of overland flow and erosion. We have recorded the spatial variability of wetted patches of ground and the connection of these patches together to initiate overland flow. To date we have recorded images for rain storms with 30-minute maximum intensities ranging from 5 mm/h (our threshold to trigger continuous photographs) to 32 mm/h. In the near future we will update the camera's control system to 1) include a clock to enable time-lapse photographs at a lower frequency in addition to the event-triggered images, and 2) to add a radio to allow the camera to be triggered remotely. Radio communication will provide a means of starting the camera in response to non-local events, allowing us to capture images or video of flash flood surge fronts and debris flows, and to synchronize the operations of multiple cameras in the field. Schematics and instructions to build this camera station, which can be used to take either photos or video, are open-source licensed and are available online at http://instaar.colorado.edu/~wickert/atvis. It is our hope that this tool can be used by other researchers to better understand processes in burned watersheds and other sensitive areas that are likely to respond rapidly to rainfall.

Wideband spectrum analysis of ultra-high frequency radio-wave signals due to advanced one-phonon non-collinear anomalous light scattering.

PubMed

Shcherbakov, Alexandre S; Arellanes, Adan Omar

2017-04-20

We present a principally new acousto-optical cell providing an advanced wideband spectrum analysis of ultra-high frequency radio-wave signals. For the first time, we apply a recently developed approach with the tilt angle to a one-phonon non-collinear anomalous light scattering. In contrast to earlier cases, now one can exploit a regime with the fixed optical wavelength for processing a great number of acoustic frequencies simultaneously in the linear regime. The chosen rutile-crystal combines a moderate acoustic velocity with low acoustic attenuation and allows us wide-band data processing within GHz-frequency acoustic waves. We have created and experimentally tested a 6-cm aperture rutile-made acousto-optical cell providing the central frequency 2.0 GHz, frequency bandwidth ∼0.52  GHz with the frequency resolution about 68.3 kHz, and ∼7620 resolvable spots. A similar cell permits designing an advanced ultra-high-frequency arm within a recently developed multi-band radio-wave acousto-optical spectrometer for astrophysical studies. This spectrometer is intended to operate with a few parallel optical arms for processing the multi-frequency data flows within astrophysical observations. Keeping all the instrument's advantages of the previous schematic arrangement, now one can create the highest-frequency arm using the developed rutile-based acousto-optical cell. It permits optimizing the performances inherent in that arm via regulation of both the central frequency and the frequency bandwidth for spectrum analysis.

Balloon Borne Ultraviolet Spectrometer.

DTIC Science & Technology

1978-12-28

n.c.aaary ond lden lfy by block numb.r) ultraviolet ground support equipment (GSE) spectrometers flight electronics instrumentation balloons \\ solar ...Assembly 4 Fig. 3 Solar Balloon Experiment Ass ’y 7 Fig. 4 Mechanical Interface , UV Spectrometer 8 Fig . 5 Spectrometer Body Assemb ly 10 Fig. 6...Diagram, GSE )bnitor 48 Selector and Battery Charger Fig. 25 Schematic Diagram, GSE Serial to 49 Parallel Data Converter Fig. 26 Schematic Diagram

Risk Assessment and Mapping of Fecal Contamination in the Ohio River Basin

NASA Astrophysics Data System (ADS)

Cabezas, A.; Morehead, D.; Teklitz, A.; Yeghiazarian, L.

2014-12-01

Decisions in many problems in engineering planning are invariably made under conditions of uncertainty imposed by the inherent randomness of natural phenomena. Water quality is one such problem. For example, the leading cause of surface-water impairment in the US is fecal microbial contamination, which can potentially trigger massive outbreaks of gastrointestinal disease. It is well known that the difficulty in prediction of water contamination is rooted in the stochastic variability of microbes in the environment, and in the complexity of environmental systems.To address these issues, we employ a risk-based design format to compute the variability in microbial concentrations and the probability of exceeding the E. Coli target in the Ohio River Basin (ORB). This probability is then mapped onto the basin's stream network within the ArcGIS environment. We demonstrate how spatial risk maps can be used in support of watershed management decisions, in particular in the assessment of best management practices for reduction of E. Coli load in surface water. The modeling environment selected for the analysis is the Schematic Processor (SP), a suite of geoprocessing ArcGIS tools. SP operates on a schematic, link-and-node network model of the watershed. The National Hydrography Dataset (NHD) is used as the basis for this representation, as it provides the stream network, lakes, and catchment definitions. Given the schematic network of the watershed, SP adds the capability to perform mathematical computations along the links and at the nodes. This enables modeling fate and transport of any entity over the network. Data from various sources have been integrated for this analysis. Catchment boundaries, lake locations, the stream network and flow data have been retrieved from the NHDPlus. Land use data come from the National Land Cover Database (NLCD), and microbial observations data from the Ohio River Sanitation Committee. The latter dataset is a result of a 2003-2007 longitudinal study. Samples for E. coli analysis were collected approximately every five miles along the entire length of the Ohio River, with additional samples collected at the mouths of over 125 direct tributaries to the Ohio River.

Tritium Management Loop Design Status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rader, Jordan D.; Felde, David K.; McFarlane, Joanna

This report summarizes physical, chemical, and engineering analyses that have been done to support the development of a test loop to study tritium migration in 2LiF-BeF2 salts. The loop will operate under turbulent flow and a schematic of the apparatus has been used to develop a model in Mathcad to suggest flow parameters that should be targeted in loop operation. The introduction of tritium into the loop has been discussed as well as various means to capture or divert the tritium from egress through a test assembly. Permeation was calculated starting with a Modelica model for a transport through amore » nickel window into a vacuum, and modifying it for a FLiBe system with an argon sweep gas on the downstream side of the permeation interface. Results suggest that tritium removal with a simple tubular permeation device will occur readily. Although this system is idealized, it suggests that rapid measurement capability in the loop may be necessary to study and understand tritium removal from the system.« less

Characteristics of an axisymmetric sudden expansion flow

NASA Technical Reports Server (NTRS)

Stevenson, W. H.; Thompson, H. D.

1985-01-01

A two-color, two component Laser Doppler Velocimeter (LDV) system operating in forward scatter has been developed in order to make simultaneous measurements of the axial and radial velocity components in an axisymmetric sudden expansion flow with and without combustion. The LDV system includes Bragg cell modulators in the four beam paths to allow a net frequency shift of 5MHz in both the green and blue beams. This permits an unambiguous measurement of negative velocities and also eliminates incomplete signal bias. The green beam probe volume has a waist diameter of 0.200 mm and is approximately 2mm long. The blue beam has a probe volume waist of 0.250 mm and is approximately 1 mm long. The scattered light from the probe volume is separated so that approximately 80% of each color passes to its respective photomultiplier tube by using a dichroic filter. Narrow bandpass filters are used to further filter unwanted signals before they are detected. A schematic diagram of the LDV system is shown.

Independent Orbiter Assessment (IOA): Analysis of the active thermal control subsystem

NASA Technical Reports Server (NTRS)

Sinclair, S. K.; Parkman, W. E.

1987-01-01

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical (PCIs) items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results corresponding to the Orbiter Active Thermal Control Subsystem (ATCS) are documented. The major purpose of the ATCS is to remove the heat, generated during normal Shuttle operations from the Orbiter systems and subsystems. The four major components of the ATCS contributing to the heat removal are: Freon Coolant Loops; Radiator and Flow Control Assembly; Flash Evaporator System; and Ammonia Boiler System. In order to perform the analysis, the IOA process utilized available ATCS hardware drawings and schematics for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. Of the 310 failure modes analyzed, 101 were determined to be PCIs.

Research and development studies for MHD/coal power flow train components. Part II. Diagnostics and instrumentation MHD channel combutor. Progres report. [Flow calculations for combustors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bloom, M.H.; Lederman, S.; Sforza, P.

1980-01-01

This is Part II of the Technical Progress Report on Tasks II-IV of the subject contract. It deals sequentially with Diagnostics and Instrumentation, the MHD Channel and the Combustor. During this period, a significant effort has gone into establishing a schematic design of a laser diagnostic system which can be applied to the flow-train of the MHD system, and to acquiring, assembling and shaking down a laboratory set-up upon which a prototype can be based. With further reference to the MHD Channel, a model analysis has been initiated of the two-dimensional MHD boundary layer between two electrodes in the limitmore » of small magnetic Reynolds numbers with negligible effect of the flow on the applied magnetic field. An objective of this model study is the assessment of variations in initial conditions on the boundary layer behavior. Finally, the problem of combustion modeling has been studied on an initial basis. The open reports on this subject depict a high degree of empiricism, centering attention on global behavior mainly. A quasi-one-dimensional model code has been set-up to check some of the existing estimates. Also a code for equilibrium combustion has been activated.« less

The Melting of Natural Snowflakes Suspended in a Vertical Wind Tunnel.

DTIC Science & Technology

1982-06-01

during the melting process is also recorded by cameras A newly developed valve controls the airflow in the chamber while ma n ining the air conditions...12 3.2. Position of Camera System within the Coldroom ..... ... 14 3.3. Schematic Illustration of the Photographic System . . . 15 3.4...apparatus satisfying the majority of the above mentioned criteria. As the snowflake fell into the apparatus, it would pass a camera /stroboscope arrangement

Electronic Devices with Rubidium Barrier Film and Process for Making Same

DTIC Science & Technology

1998-08-20

barrier film is comprised of a plurality of contiguous monolayers, while FIG. 7B shows another embodiment of the 20 invention where the barrier film is... plurality of contiguous monolayers in which different monolayers thereof are formed of different types of metal atoms. -10- FIG. 8 is a schematic...system directed toward the substrate 26. A diffusion barrier precursor compound effusion cell, for example a barium fluoride, strontium fluoride or the

Penetration Mechanics of Composites

DTIC Science & Technology

1992-04-01

distribution for tensile strength of hollow virgin filaments, based on 128 tests (source: Owens / Corning Fiberglas Corp). 14 1.2 Schematic of split Hopkinson...These were supplied by Owens / Corning Fiberglas Corporation, Granville, Ohio in two forms: 463AA750 (750 yd/lb) roving tow and G150 (1500 yd/lb...penetration of 12.7-mm thick (25-ply) GRP. Targets were fabricated by Owens Corning Fiberglas (OCF) by a licensed process designated HJ1. This complies

The CRREL Instrumented Vehicle: Hardware and Software.

DTIC Science & Technology

1983-01-01

rear axle torque are meas- ured. The vehicle is equipped for front-wheel, rear-wheel or four-wheel drive. A dual brake system allows front-, rear- or...four-wheel braking . A minicomputer- based data acquisition system is installed in the vehicle to control data gather ing and to process the data. The...o..o...o 4 4. Dual brake system control valves . ........ 5 5. Schematic of modified brake system ...... .... st 5 6. Air-shock-absorber regulator

The Wernicke area: Modern evidence and a reinterpretation.

PubMed

Binder, Jeffrey R

2015-12-15

The term "Wernicke's area" is most often used as an anatomical label for the gyri forming the lower posterior left sylvian fissure. Although traditionally this region was held to support language comprehension, modern imaging and neuropsychological studies converge on the conclusion that this region plays a much larger role in speech production. This evidence is briefly reviewed, and a simple schematic model of posterior cortical language processing is described. © 2015 American Academy of Neurology.

Advanced EMU Portable Life Support System (PLSS) and Shuttle/ISS EMU Schematics, a Comparison

NASA Technical Reports Server (NTRS)

Campbell, Colin

2012-01-01

In order to be able to adapt to differing vehicle interfaces such as suitport and airlock, adjust to varying vehicle pressure schedules, tolerate lower quality working fluids, and adapt to differing suit architectures as dictated by a range of mission architectures, the next generation space suit requires more adaptability and robustness over that of the current Shuttle/ISS Extra-vehicular Mobility Unit (EMU). While some features have been added to facilitate interfaces to differing vehicle and suit architectures, the key performance gains have been made via incorporation of new technologies such as the variable pressure regulators, Rapid Cycle Amine swing-bed, and Suit Water Membrane Evaporator. This paper performs a comparison between the Shuttle/ISS EMU PLSS schematic and the Advanced EMU PLSS schematic complete with a discussion for each difference.

Misreporting signs of child abuse: the role of decision-making and outcome information.

PubMed

Lindholm, Torun; Sjöberg, Rickard L; Memon, Amina

2014-02-01

Two studies provided evidence that a decision to report an ambiguous case of child abuse affected subsequent memory of the case information, such that participants falsely recognized details that were not presented in the original information, but that are schematically associated with child abuse. Moreover, post-decision information that the child had later died from abuse influenced the memory reports of participants who had chosen not to report the case, increasing their reports of false schema-consistent details. This suggests that false decision-consistent memories are primarily due to sense-making, schematic processing rather than the motivation to justify the decision. The present findings points to an important mechanism by which decision information can become distorted in retrospect, and emphasize the difficulties of improving future decision-making by contemplating past decisions. The results also indicate that decisions may generate false memories in the apparent absence of external suggestion or misleading information. Implications for decision-making theory, and applied practices are discussed. © 2013 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

A network thermodynamic two-port element to represent the coupled flow of salt and current. Improved alternative for the equivalent circuit.

PubMed Central

Mikulecky, D C

1979-01-01

A two-port for coupled salt and current flow is created by using the network thermodynamic approach in the same manner as that for coupled solute and volume flow (Mikulecky et al., 1977b; Mikulecky, 1977). This electrochemical two-port has distinct advantages over the equivalent circuit representation and overcomes difficulties pointed out by Finkelstein and Mauro (1963). The electrochemical two-port is used to produce a schematic diagram of the coupled flows through a tissue. The network is superimposable on the tissue morphology and preserves the physical qualities of the flows and forces in each part of an organized structure (e.g., an epithelium). The topological properties are manipulated independently from the constitutive (flow-force) relations. The constitutive relations are chosen from a number of alternatives depending on the detail and rigor desired. With the topology and constitutive parameters specified, the steady-state behavior is simulated with a network simulation program. By using capacitance to represent the filling and depletion of compartments, as well as the traditional electrical capacitances, time-dependent behavior is also simulated. Nonlinear effects arising from the integration of equations describing local behavior (e.g., the Nernst-Planck equations) are dealt with explicitly. The network thermodynamic approach provides a simple, straightforward method for representing a system diagrammatically and then simulating the system's behavior from the diagram with a minimum of mathematical manipulation. PMID:262391

Description and field analysis of a coupled ground-water/surface-water flow model (MODFLOW/BRANCH) with modifications for structures and wetlands in southern Dade County, Florida

USGS Publications Warehouse

Swain, E.D.; Howie, Barbara; Dixon, Joann

1996-01-01

A coupled surface-water model (BRANCH) and ground-water model (MODFLOW) model were tested to simulate the interacting wetlands/surface-water/ ground-water system of southern Dade County. Several options created for the MODFLOW ground- ground-water model were used in representing this field situation. The primary option is the MODBRANCH interfacing software, which allows leakage to be accounted for between the MODFLOW ground-water model and the BRANCH dynamic model for simulation of flow in an interconnected network of open channels. A modification to an existing software routine, which is referred to as BCF2, allows cells in MODFLOW to rewet when dry--a requirement in representing the seasonal wetlands in Dade County. A companion to BCF2 is the modified evapotranspiration routine EVT2. The EVT2 routine changes the cells where evapotranspiration occurs, depending on which cells are wet. The Streamlink package represents direct connections between the canals and wetlands at locations where canals open directly into overland flow. Within the BRANCH model, the capability to represent the numerous hydraulic structures, gated spillways, gated culverts, and pumps was added. The application of these modifications to model surface-water/ground-water interactions in southern Dade County demonstrated the usefulness of the coupled MODFLOW/BRANCH model. Ground-water and surface-water flows are both simulated with dynamic models. Flow exchange between models, intermittent wetting and drying, evapotranspiration, and hydraulic structure operations are all represented appropriately. Comparison was made with a simulation using the RIV1 package instead of MODBRANCH to represent the canals. RIV1 represents the canals by user-defined stages, and computes leakage to the aquifer. Greater accuracy in reproducing measured ground- water heads was achieved with MODBRANCH, which also computes dynamic flow conditions in the canals, unlike RIV1. The surface-water integrated flow and transport two-dimensional model (SWIFT2D) was also applied to the southeastern coastal wetlands for comparison with the wetlands flow approximation made in MODFLOW. MODFLOW simulates the wetlands as a highly conductive upper layer of the aquifer, whereas SWIFT2D solves the hydrodynamic equations. Comparison in this limited test demonstrated no specific advantage for either method of representation. However, much additional testing on a wider variety of geometric and hydraulic situations, such as in areas with greater tidal or other dynamic forcing effects, is needed to make definite conclusions. A submodel of the existing southern Dade County model schematization was used to examine water-delivery alternatives proposed by the U.S. Army Corps of Engineers. For this application, the coupled MODFLOW/BRANCH model was used as a design tool. A new canal and several pumps to be tested to maintain lower water levels in a residential area (while water levels in the Everglades are raised) were added to the model schematization. The pumps were assumed to have infinite supply capacity in the model so that their maximum pumping rates during the simulation could be used to determine pump sizes.

Memory Transformation Enhances Reinforcement Learning in Dynamic Environments.

PubMed

Santoro, Adam; Frankland, Paul W; Richards, Blake A

2016-11-30

Over the course of systems consolidation, there is a switch from a reliance on detailed episodic memories to generalized schematic memories. This switch is sometimes referred to as "memory transformation." Here we demonstrate a previously unappreciated benefit of memory transformation, namely, its ability to enhance reinforcement learning in a dynamic environment. We developed a neural network that is trained to find rewards in a foraging task where reward locations are continuously changing. The network can use memories for specific locations (episodic memories) and statistical patterns of locations (schematic memories) to guide its search. We find that switching from an episodic to a schematic strategy over time leads to enhanced performance due to the tendency for the reward location to be highly correlated with itself in the short-term, but regress to a stable distribution in the long-term. We also show that the statistics of the environment determine the optimal utilization of both types of memory. Our work recasts the theoretical question of why memory transformation occurs, shifting the focus from the avoidance of memory interference toward the enhancement of reinforcement learning across multiple timescales. As time passes, memories transform from a highly detailed state to a more gist-like state, in a process called "memory transformation." Theories of memory transformation speak to its advantages in terms of reducing memory interference, increasing memory robustness, and building models of the environment. However, the role of memory transformation from the perspective of an agent that continuously acts and receives reward in its environment is not well explored. In this work, we demonstrate a view of memory transformation that defines it as a way of optimizing behavior across multiple timescales. Copyright © 2016 the authors 0270-6474/16/3612228-15$15.00/0.

Coordinating Communities and Building Governance in the Development of Schematic and Semantic Standards: the Key to Solving Global Earth and Space Science Challenges in the 21st Century.

NASA Astrophysics Data System (ADS)

Wyborn, L. A.

2007-12-01

The Information Age in Science is being driven partly by the data deluge as exponentially growing volumes of data are being generated by research. Such large volumes of data cannot be effectively processed by humans and efficient and timely processing by computers requires development of specific machine readable formats. Further, as key challenges in earth and space sciences, such as climate change, hazard prediction and sustainable development resources require a cross disciplinary approach, data from various domains will need to be integrated from globally distributed sources also via machine to machine formats. However, it is becoming increasingly apparent that the existing standards can be very domain specific and most existing data transfer formats require human intervention. Where groups from different communities do try combine data across the domain/discipline boundaries much time is spent reformatting and reorganizing the data and it is conservatively estimated that this can take 80% of a project's time and resources. Four different types of standards are required for machine to machine interaction: systems, syntactic, schematic and semantic. Standards at the systems (WMS, WFS, etc) and at the syntactic level (GML, Observation and Measurement, SensorML) are being developed through international standards bodies such as ISO, OGC, W3C, IEEE etc. In contrast standards at the schematic level (e.g., GeoSciML, LandslidesML, WaterML, QuakeML) and at the semantic level (ie ontologies and vocabularies) are currently developing rapidly, in a very uncoordinated way and with little governance. As the size of the community that can machine read each others data depends on the size of the community that has developed the schematic or semantic standards, it is essential that to achieve global integration of earth and space science data, the required standards need to be developed through international collaboration using accepted standard proceedures. Once developed the standards also require some form of governance to maintain and then extend the standard as the science evolves to meet new challenges. A standard that does have some governance is GeoSciML, a data transfer standard for geoscience map data. GeoSciML is currently being developed by a consortium of 7 countries under the auspices of the Commission for the Management of and Application of Geoscience Information (CGI), a commission of the International Union of Geological Sciences. Perhaps other `ML' or ontology and vocabulary development `teams' need to look to their international domain specific specialty societies for endorsement and governance. But the issue goes beyond Earth and Space Sciences, as increasingly cross and intra disciplinary science requires machine to machine interaction with other science disciplines such as physics, chemistry and astronomy. For example, for geochemistry do we develop GeochemistryML or do we extend the existing Chemical Markup Language? Again, the question is who will provide the coordination of the development of the required schematic and semantic standards that underpin machine to machine global integration of science data. Is this a role for ICSU or CODATA or who? In order to address this issue, Geoscience Australia and CSIRO established the Solid Earth and Environmental Grid Community website to enable communities to `advertise' standards development and to provide a community TWIKI where standards can be developed in a globally `open' environment.

Microterminal/Microfiche System for Computer-Based Instruction: Hardware and Software Development.

DTIC Science & Technology

1980-10-01

Circuit Description and Schematic of Adaptor Module 57 Appendix C Circuit Description The schematics for circuitry used in the microfiche viewer and the...composed of four major components and associated interfaces. The major components are (a) mirroterminal. (Is) microfiche reader. (0) memory module , and (d...sensing of the position of the platen containing the microfiche so that frame locations can be verified by the microterminal software. The memory module is

Expanding the KATE toolbox

NASA Technical Reports Server (NTRS)

Thomas, Stan J.

1993-01-01

KATE (Knowledge-based Autonomous Test Engineer) is a model-based software system developed in the Artificial Intelligence Laboratory at the Kennedy Space Center for monitoring, fault detection, and control of launch vehicles and ground support systems. In order to bring KATE to the level of performance, functionality, and integratability needed for firing room applications, efforts are underway to implement KATE in the C++ programming language using an X-windows interface. Two programs which were designed and added to the collection of tools which comprise the KATE toolbox are described. The first tool, called the schematic viewer, gives the KATE user the capability to view digitized schematic drawings in the KATE environment. The second tool, called the model editor, gives the KATE model builder a tool for creating and editing knowledge base files. Design and implementation issues having to do with these two tools are discussed. It will be useful to anyone maintaining or extending either the schematic viewer or the model editor.

Laser-Based Measurements of OH, Temperature, and Water Vapor Concentration in a Hydrocarbon-Fueled Scramjet (POSTPRINT)

DTIC Science & Technology

2008-07-01

hours. The detector signals are post-processed with a software lock-in amplifier to recover the WMS-1f and WMS-2f signals. The TDLAS sensor utilizes...Figure 6. Schematic of TDLAS sensor for temperature and water vapor concentration. Fiber Diode lasers Grating Fiber Detectors Demultiplexer Multiplexer...within the combustor. Tunable diode laser- based absorption spectroscopy ( TDLAS ) is used to measure water vapor concentration and static temperature near

BRCA1 Regulation of Estrogen Signaling in the Breast

DTIC Science & Technology

2007-05-01

PAGE and processed by immunoblot analysis with antibodies specific for GAL4- DBD or ER as indicated by arrows. Note that differences in the relative...derivative 1–150 (N terminus). Schematic diagrams of ER and DBC-1 indicate fragments used in binding reactions. AF-1, Activation function 1; DBD , DNA...solved by SDS-10% PAGE. Proteins were analyzed by im- munoblot using antibodies against GAL4- DBD (RK5C1; Santa Cruz Biotechnology, Santa Cruz, CA

Microfabricating 3D Structures by Laser Origami

DTIC Science & Technology

2011-11-09

10.1117/2.1201111.003952 Microfabricating 3D structures by laser origami Alberto Piqué, Scott Mathews, Andrew Birnbaum, and Nicholas Charipar A new...folding known as origami allows the transformation of flat patterns into 3D shapes. A similar approach can be used to generate 3D structures com...materials Figure 1. (A–C) Schematic illustrating the steps in the laser origami process and (D) a resulting folded out-of-plane 3D structure. that can

LANDSAT-D flight segment operations manual, volume 1

NASA Technical Reports Server (NTRS)

Varhola, J.

1982-01-01

Hardware, systems, and subsystems for the multimission modular spacecraft used for LANDSAT 4 are described and depicted in block diagrams and schematics. Components discussed include the modular attitude control system; the communication and data handling subsystem; the narrowband tape recorder; the on-board computer; the propulsion module subsystem; the signal conditioning and control unit; the modular power subsystem; the solar array drive and power transmission assembly; the power distribution unit; the digital processing unit; and the wideband communication subsystem.

Insight from simulations of single-well injection-withdrawal tracer tests on simple and complex fractures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsang, C.-F.; Doughty, C.

2009-08-06

The single-well injection withdrawal (SWIW) test, a tracer test utilizing only one well, is proposed as a useful contribution to site characterization of fractured rock, as well as providing parameters relevant to tracer diffusion and sorption. The usual conceptual model of flow and solute transport through fractured rock with low matrix permeability involves solute advection and dispersion through a fracture network coupled with diffusion and sorption into the surrounding rock matrix. Unlike two-well tracer tests, results of SWIW tests are ideally independent of advective heterogeneity, channeling and flow dimension, and, instead, focus on diffusive and sorptive characteristics of tracer (solute)more » transport. Thus, they can be used specifically to study such characteristics and evaluate the diffusive parameters associated with tracer transport through fractured media. We conduct simulations of SWIW tests on simple and complex fracture models, the latter being defined as having two subfractures with altered rock blocks in between and gouge material in their apertures. Using parameters from the Aspo site in Sweden, we calculate and study SWIW tracer breakthrough curves (BTCs) from a test involving four days of injection and then withdrawal. By examining the peak concentration C{sub pk} of the SWIW BTCs for a variety of parameters, we confirm that C{sub pk} is largely insensitive to the fracture advective flow properties, in particular to permeability heterogeneity over the fracture plane or to subdividing the flow into two subfractures in the third dimension orthogonal to the fracture plane. The peak arrival time t{sub pk} is not a function of fracture or rock properties, but is controlled by the time schedule of the SWIW test. The study shows that the SWIW test is useful for the study of tracer diffusion-sorption processes, including the effect of the so-called flow-wetted surface (FWS) of the fracture. Calculations with schematic models with different FWS values are conducted and the possibility of direct in situ measurement of FWS with SWIW tests is demonstrated.« less

Blobel and Sabatini's "Beautiful Idea": Visual Representations of the Conception and Refinement of the Signal Hypothesis.

PubMed

LaBonte, Michelle Lynne

2017-11-01

In 1971, Günter Blobel and David Sabatini proposed a novel and quite speculative schematic model to describe how proteins might reach the proper cellular location. According to their proposal, proteins destined to be secreted from the cell contain a "signal" to direct their release. Despite the fact that Blobel and Sabatini presented their signal hypothesis as a "beautiful idea" not grounded in experimental evidence, they received criticism from other scientists who opposed such speculation. Following the publication of the 1971 model, Blobel persisted in conducting experiments and revising the model to incorporate new data. In fact, over the period of 1975-1984, Blobel and colleagues published five subsequent schematic models of the signal hypothesis, each revised based on new laboratory evidence. I propose that the original 1971 model can be viewed as an epistemic creation. Additionally, analysis of the subsequent schematic diagrams over the period of 1975-1984 allows one to track Blobel's changing conception of an epistemic object over time. Furthermore, the entire series of schematic diagrams presented by Blobel from 1971 to 1984 allow one to visualize the initial conception and subsequent reworking of a scientific theory. In 1999, Blobel was awarded the Nobel Prize in Physiology or Medicine for his work on the signal hypothesis, which was ultimately supported by experimental evidence gathered after the speculative model was published.

A fluorometric lateral flow assay for visual detection of nucleic acids using a digital camera readout.

PubMed

Magiati, Maria; Sevastou, Areti; Kalogianni, Despina P

2018-06-04

A fluorometric lateral flow assay has been developed for the detection of nucleic acids. The fluorophores phycoerythrin (PE) and fluorescein isothiocyanate (FITC) were used as labels, while a common digital camera and a colored vinyl-sheet, acting as a cut-off optical filter, are used for fluorescence imaging. After DNA amplification by polymerase chain reaction (PCR), the biotinylated PCR product is hybridized to its complementary probe that carries a poly(dA) tail at 3΄ edge and then applied to the lateral flow strip. The hybrids are captured to the test zone of the strip by immobilized poly(dT) sequences and detected by streptavidin-fluorescein and streptavidin-phycoerythrin conjugates, through streptavidin-biotin interaction. The assay is widely applicable, simple, cost-effective, and offers a large multiplexing potential. Its performance is comparable to assays based on the use of streptavidin-gold nanoparticles conjugates. As low as 7.8 fmol of a ssDNA and 12.5 fmol of an amplified dsDNA target were detectable. Graphical abstract Schematic presentation of a fluorometric lateral flow assay based on fluorescein and phycoerythrin fluorescent labels for the detection of single-stranded (ssDNA) and double-stranded DNA (dsDNA) sequences and using a digital camera readout. SA: streptavidin, BSA: Bovine Serum Albumin, B: biotin, FITC: fluorescein isothiocyanate, PE: phycoerythrin, TZ: test zone, CZ: control zone.

The Effects of Cereals and Legumes on Iron Availability.

DTIC Science & Technology

1982-06-01

vegetable protein FIGURE S Schematic diagam of the changes in the composition of soy beans as a result of processing. (Courtesy of L. Schutte) 24 (3) Moist...is influenced much more iron is absorbed by iron-deficient subjects and more than is heme iron by the composition of the diet less by those who are...from composite meals has been validated Rasmussen, 1981). Another precaution that must be in a number of ways (Hallberg, 1981a). As mentioned taken

Conceptual schematic for capture of biomethane released from hydroelectric power facilities.

PubMed

Kikuchi, R; Amaral, P Bingre do

2008-09-01

Though dam-related biomethane was identified in the 1960s, its capture has not been sufficiently discussed. Captured biomethane could be burned to produce energy, and the burning of biomethane turns the carbon in it into CO(2) that is far less potent as a greenhouse gas; this paper therefore aims to technically discuss the capture/use of dam-related biomethane. A great amount of bubbles would be formed by the rapid drop in water pressure (i.e. cavitation) after turbine passage, so it is proposed to capture methane-bearing bubbles by means of a flow tube for adjusting residence time and hydrophilic screens for trapping these bubbles. The results from the performed calculation show that biomethane can be trapped in a yield of 60%.

Conceptual Design of an In-Space Cryogenic Fluid Management Facility

NASA Technical Reports Server (NTRS)

Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

1981-01-01

The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is presented. The proposed facility consisting of a supply tank, receiver tank, pressurization system, instrumentation, and supporting hardware, is described. The experimental objectives, the receiver tank to be modeled, and constraints imposed on the design by the space shuttle, Spacelab, and scaling requirements, are described. The conceptual design, including the general configurations, flow schematics, insulation systems, instrumentation requirements, and internal tank configurations for the supply tank and the receiver tank, is described. Thermal, structural, fluid, and safety and reliability aspects of the facility are analyzed. The facility development plan, including schedule and cost estimates for the facility, is presented. A program work breakdown structure and master program schedule for a seven year program are included.

Schematic baryon models, their tight binding description and their microwave realization

NASA Astrophysics Data System (ADS)

Sadurní, E.; Franco-Villafañe, J. A.; Kuhl, U.; Mortessagne, F.; Seligman, T. H.

2013-12-01

A schematic model for baryon excitations is presented in terms of a symmetric Dirac gyroscope, a relativistic model solvable in closed form, that reduces to a rotor in the non-relativistic limit. The model is then mapped on a nearest neighbour tight binding model. In its simplest one-dimensional form this model yields a finite equidistant spectrum. This is experimentally implemented as a chain of dielectric resonators under conditions where their coupling is evanescent and a good agreement with the prediction is achieved.

An Evaluation of the Service Failure of Aluminum Nose Cones Using Four Test Techniques.

DTIC Science & Technology

1987-03-01

13 LIST OF ILLUSTRATIONS 1. Schematic of nose cone. 14 2. Subsize Charpy specimen. 15 3. Simulation test fixture. 16 4. Force displacement plot from...Figure 1. Schematic of nose cone. 14 LD 0.06 03-a 0.30L IL 1.602 Figure 2. Subsize Charpy specimen. i5 RAM DISPLACEMENT COLLART WV Ualz APPLIED FORCE...between threaded and tapered regions. In all, four measurements were made on each nose cone. The two material property measurements were made using Charpy

Effect of Load History on Fatigue Life.

DTIC Science & Technology

1980-06-01

emission 166 6.4.4 Edge replication 176 6.4.5 Stiffness monitoring 177 6.4.6 Temperature monitoring 179 6.5 Selection of NDI Techniques for Tasks II and III...composites of T300/5208 and T300/934 in room temperature, laboratory at R = 0.0 139 66 Schematic of acoustic emission event 151 67 Schematic diagram of...acoustic emission system 152 68 Cross section in the 00 direction of a coupon loaded statically to 60% of the Average Ultimate Tensile Strength 158

Mechanical verification of a schematic Byzantine clock synchronization algorithm

NASA Technical Reports Server (NTRS)

Shankar, Natarajan

1991-01-01

Schneider generalizes a number of protocols for Byzantine fault tolerant clock synchronization and presents a uniform proof for their correctness. The authors present a machine checked proof of this schematic protocol that revises some of the details in Schneider's original analysis. The verification was carried out with the EHDM system developed at the SRI Computer Science Laboratory. The mechanically checked proofs include the verification that the egocentric mean function used in Lamport and Melliar-Smith's Interactive Convergence Algorithm satisfies the requirements of Schneider's protocol.

Subacute Effects of Inhaled Jet Fuel-A (JET A) on Airway and Immune Function in Rats

DTIC Science & Technology

2012-07-16

the source of the oil used in its manufacture. This study used fuel provided by five of the major oil companies ( blend POSF-4658, Chevron, Shell Oil... using a Hastings (Model 40) monitor. The chamber system schematic is depicted in Figure 4. Figure 4. Schematic of exposure control system...were used due to concerns that the air control animals (Group 2) might be unintentionally exposed to background levels of Jet A. Group 2 was exposed

Schematic designs for penetration seals for a reference repository in bedded salt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelsall, P.C.; Case, J.B.; Meyer, D.

1982-11-01

The isolation of radioactive wastes in geologic repositories requires that man-made penetrations such as shafts, tunnels, or boreholes are adequately sealed. This report describes schematic seal designs for a repository in bedded salt referenced to the straitigraphy of southeastern New Mexico. The designs are presented for extensive peer review and will be updated as site-specific conceptual designs when a site for a repository in salt has been selected. The principal material used in the seal system is crushed salt obtained from excavating the repository. It is anticipated that crushed salt will consolidate as the repository rooms creep close to themore » degree that mechanical and hydrologic properties will eventually match those of undisturbed, intact salt. For southeastern New Mexico salt, analyses indicate that this process will require approximately 1000 years for a seal located at the base of one of the repository shafts (where there is little increase in temperature due to waste emplacement) and approximately 400 years for a seal located in an access tunnel within the repository. Bulkheads composed of contrete or salt bricks are also included in the seal system as components which will have low permeability during the period required for salt consolidation.« less

Space Shuttle critical function audit

NASA Technical Reports Server (NTRS)

Sacks, Ivan J.; Dipol, John; Su, Paul

1990-01-01

A large fault-tolerance model of the main propulsion system of the US space shuttle has been developed. This model is being used to identify single components and pairs of components that will cause loss of shuttle critical functions. In addition, this model is the basis for risk quantification of the shuttle. The process used to develop and analyze the model is digraph matrix analysis (DMA). The DMA modeling and analysis process is accessed via a graphics-based computer user interface. This interface provides coupled display of the integrated system schematics, the digraph models, the component database, and the results of the fault tolerance and risk analyses.

Numerical modelling of fine-grained sediments remobilization in heavily polluted streams. Case study: Elbe and Bílina River, Czech Republic.

NASA Astrophysics Data System (ADS)

Kaiglová, Jana; Langhammer, Jakub; Jiřinec, Petr; Janský, Bohumír; Chalupová, Dagmar

2014-05-01

The study aimed to estimate remobilization of channel and riparian cohesive sediment of streams, heavily polluted by industrial emmissions. There were analyzed four stream stretches in Czech Republic: (1) Elbe River from Usti nad Labem to the boundary with Germany; (2) Bílina river, draining industrial and mining areas of Northwest Bohemia; (3) Midstream reach of Czech Elbe by the confluence with Vltava river, affected by chemical industry and (4) fluvial lakes in the riparian zone of Czech Elbe river downstream of Pardubice burdened by old loads from heavy chemical industry. Sediments of clay and silt character bedded in the riparian water-courses are regarded heavily polluted by wide range of toxic matters. In the sediment samples, there were found elevated concentrations of persistent organic matters (DDT, PCB, HCH, Fluoranthen), Heavy metals (Hg, As, Cd), and others. The pollution in sediment is resulting from the unregulated heavy industrial production in the area in the second half of 20th century during the socialistic regime in Czech republic that still play an important role in Elbe river water quality. The main goal of the study was to evaluate the risk of remobilization of polluted sediments by the assessment of discharge (values and return periods), initiating remobilization of sediment from the river bed. The modeling stems on basic assumption, that once the sediment is elevated from the bed, it could be transported far downstream in the form of suspended load. The evaluation was made on the basis of numerical hydrodynamic calculation coupled with sediment transport model. The MIKE by DHI modelling software with different levels of schematization was used according the flow conditions and available data sources. For 50 km stretch of Bílina river the 1D schematization (MIKE 11) was selected as the discharges driving remobilization were expected within the extent of channel capacity due to the stream regulation. For the lower and middle course of Elbe river and the riparian sediment evaluation the 2D schematization (MIKE 21 C) was selected. It enabled to distinguish flow characteristics in the zone with complicated hydrodynamic conditions. The risk of remobilization of fine-grained sediments was evaluated in order to define a threshold discharge value after that the spreading of pollution can be expected. The major contribution of the study, realized in the framework of international iniciative ELSA was the identification of threshold values for potential remobilization of sediment burdened by old loads in different environments. These threshold values are important information for identification and mitigation of risks related with old loads and hydrological extremes. From methodological point of view the study verified validity of applied distinct approaches for fine-grained sediment remobilization assessment and identified limits for their application. Key words: sediment, remobilization, old loads, modelling, hydrodynamics, Elbe river

Titanium Hydroxide - a Volatile Species at High Temperature

NASA Technical Reports Server (NTRS)

Nguyen, QuynhGiao N.

2010-01-01

An alternative method of low-temperature plasma functionalization of carbon nanotubes provides for the simultaneous attachment of molecular groups of multiple (typically two or three) different species or different mixtures of species to carbon nanotubes at different locations within the same apparatus. This method is based on similar principles, and involves the use of mostly the same basic apparatus, as those of the methods described in "Low-Temperature Plasma Functionalization of Carbon Nanotubes" (ARC-14661-1), NASA Tech Briefs, Vol. 28, No. 5 (May 2004), page 45. The figure schematically depicts the basic apparatus used in the aforementioned method, with emphasis on features that distinguish the present alternative method from the other. In this method, one exploits the fact that the composition of the deposition plasma changes as the plasma flows from its source in the precursor chamber toward the nanotubes in the target chamber. As a result, carbon nanotubes mounted in the target chamber at different flow distances (d1, d2, d3 . . .) from the precursor chamber become functionalized with different species or different mixtures of species.

Influences of Source - Item Contingency and Schematic Knowledge on Source Monitoring: Tests of the Probability-Matching Account

PubMed Central

Bayen, Ute J.; Kuhlmann, Beatrice G.

2010-01-01

The authors investigated conditions under which judgments in source-monitoring tasks are influenced by prior schematic knowledge. According to a probability-matching account of source guessing (Spaniol & Bayen, 2002), when people do not remember the source of information, they match source guessing probabilities to the perceived contingency between sources and item types. When they do not have a representation of a contingency, they base their guesses on prior schematic knowledge. The authors provide support for this account in two experiments with sources presenting information that was expected for one source and somewhat unexpected for another. Schema-relevant information about the sources was provided at the time of encoding. When contingency perception was impeded by dividing attention, participants showed schema-based guessing (Experiment 1). Manipulating source - item contingency also affected guessing (Experiment 2). When this contingency was schema-inconsistent, it superseded schema-based expectations and led to schema-inconsistent guessing. PMID:21603251

Incremental Query Rewriting with Resolution

NASA Astrophysics Data System (ADS)

Riazanov, Alexandre; Aragão, Marcelo A. T.

We address the problem of semantic querying of relational databases (RDB) modulo knowledge bases using very expressive knowledge representation formalisms, such as full first-order logic or its various fragments. We propose to use a resolution-based first-order logic (FOL) reasoner for computing schematic answers to deductive queries, with the subsequent translation of these schematic answers to SQL queries which are evaluated using a conventional relational DBMS. We call our method incremental query rewriting, because an original semantic query is rewritten into a (potentially infinite) series of SQL queries. In this chapter, we outline the main idea of our technique - using abstractions of databases and constrained clauses for deriving schematic answers, and provide completeness and soundness proofs to justify the applicability of this technique to the case of resolution for FOL without equality. The proposed method can be directly used with regular RDBs, including legacy databases. Moreover, we propose it as a potential basis for an efficient Web-scale semantic search technology.

NASA/American Cancer Society High-Resolution Flow Cytometry Project-I

NASA Technical Reports Server (NTRS)

Thomas, R. A.; Krishan, A.; Robinson, D. M.; Sams, C.; Costa, F.

2001-01-01

BACKGROUND: The NASA/American Cancer Society (ACS) flow cytometer can simultaneously analyze the electronic nuclear volume (ENV) and DNA content of cells. This study describes the schematics, resolution, reproducibility, and sensitivity of biological standards analyzed on this unit. METHODS: Calibrated beads and biological standards (lymphocytes, trout erythrocytes [TRBC], calf thymocytes, and tumor cells) were analyzed for ENV versus DNA content. Parallel data (forward scatter versus DNA) from a conventional flow cytometer were obtained. RESULTS: ENV linearity studies yielded an R value of 0.999. TRBC had a coefficient of variation (CV) of 1.18 +/- 0.13. DNA indexes as low as 1.02 were detectable. DNA content of lymphocytes from 42 females was 1.9% greater than that for 60 males, with a noninstrumental variability in total DNA content of 0.5%. The ENV/DNA ratio was constant in 15 normal human tissue samples, but differed in the four animal species tested. The ENV/DNA ratio for a hypodiploid breast carcinoma was 2.3 times greater than that for normal breast tissue. CONCLUSIONS: The high-resolution ENV versus DNA analyses are highly reliable, sensitive, and can be used for the detection of near-diploid tumor cells that are difficult to identify with conventional cytometers. ENV/DNA ratio may be a useful parameter for detection of aneuploid populations.

Integrated Reconfigurable Aperture, Digital Beam Forming, and Software GPS Receiver for UAV Navigation

DTIC Science & Technology

2007-12-11

Implemented both carrier and code phase tracking loop for performance evaluation of a minimum power beam forming algorithm and null steering algorithm...4 Antennal Antenna2 Antenna K RF RF RF ct, Ct~2 ChKx1 X2 ....... Xk A W ~ ~ =Z, x W ,=1 Fig. 5. Schematics of a K-element antenna array spatial...adaptive processor Antennal Antenna K A N-i V/ ( Vil= .i= VK Fig. 6. Schematics of a K-element antenna array space-time adaptive processor Two additional

Integrated fountain effect pump device for fluid management at low gravity

NASA Technical Reports Server (NTRS)

Yuan, S. W. K.; Frank, D. J.

1988-01-01

A new device for fluid management at low gravity is described. The system is basically the same as the enclosed capillary device using screens, in which the screens along the gallery channels are replaced by porous plugs which are responsible for both the fluid retention and pumping of He II; in this device, no downstream pump is needed. The plugs in contact with liquid He on both sides act as a fountain-effect pumps (FEPs), while plugs exposed to vapor on one side behave as vapor-liquid phase separators (VLPSs). The total net rate of He II transfer into the receiving tank equals the mass flow rate through the FEP plugs minus the liquid loss from the VLPS plugs. The results of the performance analysis of this integrated FEP device are presented together with its schematic diagram.

Lexicons, contexts, events, and images: commentary on Elman (2009) from the perspective of dual coding theory.

PubMed

Paivio, Allan; Sadoski, Mark

2011-01-01

Elman (2009) proposed that the traditional role of the mental lexicon in language processing can largely be replaced by a theoretical model of schematic event knowledge founded on dynamic context-dependent variables. We evaluate Elman's approach and propose an alternative view, based on dual coding theory and evidence that modality-specific cognitive representations contribute strongly to word meaning and language performance across diverse contexts which also have effects predictable from dual coding theory. Copyright © 2010 Cognitive Science Society, Inc.

Toward broadband mechanical spectroscopy.

PubMed

Hecksher, Tina; Torchinsky, Darius H; Klieber, Christoph; Johnson, Jeremy A; Dyre, Jeppe C; Nelson, Keith A

2017-08-15

Diverse material classes exhibit qualitatively similar behavior when made viscous upon cooling toward the glass transition, suggesting a common theoretical basis. We used seven different measurement methods to determine the mechanical relaxation kinetics of a prototype molecular glass former over a temporal range of 13 decades and over a temperature range spanning liquid to glassy states. The data conform to time-temperature superposition for the main (alpha) process and to a scaling relation of schematic mode-coupling theory. The broadband mechanical measurements demonstrated have fundamental and practical applications in polymer science, geophysics, multifunctional materials, and other areas.

Development of a Tabletop Model for the Generation of Amorphous/ Microcrystalline Metal Powders

DTIC Science & Technology

1980-04-30

Voltage Characteristics for Wetting (si) and Non-wetting (AZ 4.5% Cu ) EHD Spray 2-57 28 Schematic of the Process of Electrohydrodynamic Droplet...Microscope Image of a Deposit , Fine Powders and "Matrix" Film of Fe-Ni-B-P Metallic Glass Alloy Produced by the EHD Technique 3-9 45 Selected Area...Transmission Electron Microscope Image of a Deposit , Fine Powders and "Matrix" Film of Fe-Ni-B-P Metallic Glass Alloy Produced by the EHD Technique 3-11 xi

Joint Services Electronics Program: Basic Research in Electronics (JSEP) at the University of Texas at Austin. Appendix.

DTIC Science & Technology

1986-12-31

applications in tration on the temperature response, an effect also found the processing of Si and III-V compound semiconductors in silicon by Seidel et al. (5...Dannefaer, B. Hogg, and D. Kerr, "Defect Characterization in V. Ckil mo and Cofmment Gallium Arsenide By Positron Annihilation ," in Thirteenth We...unnecessary In "A ’I.I %’ S. 4 Brower et l. A schematic of the experimental arrangement emplSyed for application of the homodyne spectroscopy technique to

The Effects of Pain Intensity on Goal Schemas and Goal Pursuit: A Daily Diary Study

PubMed Central

Karoly, Paul; Okun, Morris A.; Enders, Craig; Tennen, Howard

2014-01-01

Objective Although the adverse effects of chronic pain on work productivity and daily life pursuits are clear, the within-person dynamics of pain, goal cognition, and engagement in work-related and lifestyle goals remain uncharted. This study investigated the impact of pain intensity (assessed on three occasions each day) and goal-related schematic thinking (ratings of importance, planning, and goal pursuit opportunities, assessed only in the morning) on afternoon and evening work and lifestyle goal pursuit. Methods A community sample of working adults with chronic pain (N =131) were screened and interviewed about their work and lifestyle goals and completed a 21-day telephonic diary. Hierarchical linear modeling was used to estimate within-person and between-person effects. Results At the within-person level, morning pain intensity was inversely related to schematic cognition concerning work and lifestyle goals, whereas, at the between-person level, morning pain intensity varied positively with schematic thinking about work goals as well with afternoon life-style goal pursuit. At both the between- and within- analytic levels, morning goal schemas were positively associated with the pursuit of each type of goal in the afternoon and again in the evening. Moreover, positive carry-over effects of morning goal schemas on next day afternoon goal pursuit were observed. Conclusions Whereas morning pain intensity exhibited inconsistent effects across analytic levels, morning goal-related schematic thinking consistently predicted goal pursuit across analytic levels, type of goal, and time of day. These findings have implications for treatment and prevention of pain’s potentially deleterious effects on workplace and lifestyle goals. PMID:25180547

A high-resolution global-scale groundwater model

NASA Astrophysics Data System (ADS)

de Graaf, I. E. M.; Sutanudjaja, E. H.; van Beek, L. P. H.; Bierkens, M. F. P.

2015-02-01

Groundwater is the world's largest accessible source of fresh water. It plays a vital role in satisfying basic needs for drinking water, agriculture and industrial activities. During times of drought groundwater sustains baseflow to rivers and wetlands, thereby supporting ecosystems. Most global-scale hydrological models (GHMs) do not include a groundwater flow component, mainly due to lack of geohydrological data at the global scale. For the simulation of lateral flow and groundwater head dynamics, a realistic physical representation of the groundwater system is needed, especially for GHMs that run at finer resolutions. In this study we present a global-scale groundwater model (run at 6' resolution) using MODFLOW to construct an equilibrium water table at its natural state as the result of long-term climatic forcing. The used aquifer schematization and properties are based on available global data sets of lithology and transmissivities combined with the estimated thickness of an upper, unconfined aquifer. This model is forced with outputs from the land-surface PCRaster Global Water Balance (PCR-GLOBWB) model, specifically net recharge and surface water levels. A sensitivity analysis, in which the model was run with various parameter settings, showed that variation in saturated conductivity has the largest impact on the groundwater levels simulated. Validation with observed groundwater heads showed that groundwater heads are reasonably well simulated for many regions of the world, especially for sediment basins (R2 = 0.95). The simulated regional-scale groundwater patterns and flow paths demonstrate the relevance of lateral groundwater flow in GHMs. Inter-basin groundwater flows can be a significant part of a basin's water budget and help to sustain river baseflows, especially during droughts. Also, water availability of larger aquifer systems can be positively affected by additional recharge from inter-basin groundwater flows.

Development of a preliminary design of a method to measure the effectiveness of virus exclusion during water process reclamation at zero-G

NASA Technical Reports Server (NTRS)

Fraser, A. S.; Wells, A. F.; Tenoso, H. J.; Linnecke, C. B.

1976-01-01

Organon Diagnostics has developed, under NASA sponsorship, a monitoring system to test the capability of a water recovery system to reject the passage of viruses into the recovered water. In this system, a non-pathogenic marker virus, bacteriophage F2, is fed into the process stream before the recovery unit and the reclaimed water is assayed for its presence. An engineering preliminary design has been performed as a parallel effort to the laboratory development of the marker virus test system. Engineering schematics and drawings present a preliminary instrument design of a fully functional laboratory prototype capable of zero-G operation.

Impoverished descriptions of familiar routes in three cases of hippocampal/medial temporal lobe amnesia.

PubMed

Herdman, Katherine A; Calarco, Navona; Moscovitch, Morris; Hirshhorn, Marnie; Rosenbaum, R Shayna

2015-10-01

Recent research has challenged classic theories of hippocampal function in spatial memory with findings that the hippocampus may be necessary for detailed representations of environments learned long ago, but not for remembering the gist or schematic aspects that are sufficient for navigating within those environments (Rosenbaum et al., 2000; Rosenbaum, Winocur, Binns, & Moscovitch, 2012). We aimed to probe further distinctions between detailed and schematic representations of familiar environments in three cases of hippocampal/medial temporal lobe (MTL) amnesia by testing them on a route description task and mental navigation tasks that assess the identity and location of landmarks, and distances and directions between them. The amnesic cases could describe basic directions along known, imagined routes, estimate distance and direction between well-known landmarks, and produce sketch maps with accurate layouts, suggestive of intact schematic representations. However, findings that their route descriptions lack richness of detail, along with impoverished sketch maps and poor landmark recognition, substantiates previous findings that detailed representations are hippocampus-dependent. Copyright © 2015 Elsevier Ltd. All rights reserved.

Understanding of anesthesia machine function is enhanced with a transparent reality simulation.

PubMed

Fischler, Ira S; Kaschub, Cynthia E; Lizdas, David E; Lampotang, Samsun

2008-01-01

Photorealistic simulations may provide efficient transfer of certain skills to the real system, but by being opaque may fail to encourage deeper learning of the structure and function of the system. Schematic simulations that are more abstract, with less visual fidelity but make system structure and function transparent, may enhance deeper learning and optimize retention and transfer of learning. We compared learning effectiveness of these 2 modes of externalizing the output of a common simulation engine (the Virtual Anesthesia Machine, VAM) that models machine function and dynamics and responds in real time to user interventions such as changes in gas flow or ventilation. Undergraduate students (n = 39) and medical students (n = 35) were given a single, 1-hour guided learning session with either a Transparent or an Opaque version of the VAM simulation. The following day, the learners' knowledge of machine components, function, and dynamics was tested. The Transparent-VAM groups scored higher than the Opaque-VAM groups on a set of multiple-choice questions concerning conceptual knowledge about anesthesia machines (P = 0.009), provided better and more complete explanations of component function (P = 0.003), and were more accurate in remembering and inferring cause-and-effect dynamics of the machine and relations among components (P = 0.003). Although the medical students outperformed undergraduates on all measures, a similar pattern of benefits for the Transparent VAM was observed for these 2 groups. Schematic simulations that transparently allow learners to visualize, and explore, underlying system dynamics and relations among components may provide a more effective mental model for certain systems. This may lead to a deeper understanding of how the system works, and therefore, we believe, how to detect and respond to potentially adverse situations.

A seismic analysis for masonry constructions: The different schematization methods of masonry walls

NASA Astrophysics Data System (ADS)

Olivito, Renato. S.; Codispoti, Rosamaria; Scuro, Carmelo

2017-11-01

Seismic analysis of masonry structures is usually analyzed through the use of structural calculation software based on equivalent frames method or to macro-elements method. In these approaches, the masonry walls are divided into vertical elements, masonry walls, and horizontal elements, so-called spandrel elements, interconnected by rigid nodes. The aim of this work is to make a critical comparison between different schematization methods of masonry wall underlining the structural importance of the spandrel elements. In order to implement the methods, two different structural calculation software were used and an existing masonry building has been examined.

Influence of dielectric barrier discharge treatment on mechanical and dyeing properties of wool

NASA Astrophysics Data System (ADS)

Rahul, NAVIK; Sameera, SHAFI; Md Miskatul, ALAM; Md Amjad, FAROOQ; Lina, LIN; Yingjie, CAI

2018-06-01

Physical and chemical properties of wool surface significantly affect the absorbency, rate of dye bath exhaustion and fixation of the industrial dyes. Hence, surface modification is a necessary operation prior to coloration process in wool wet processing industries. Plasma treatment is an effective alternative for physiochemical modification of wool surface. However, optimum processing parameters to get the expected modification are still under investigation, hence this technology is still under development in the wool wet processing industries. Therefore, in this paper, treatment parameters with the help of simple dielectric barrier discharge plasma reactor and air as a plasma gas, which could be a promising combination for treatment of wool substrate at industrial scale were schematically studied, and their influence on the water absorbency, mechanical, and dyeing properties of twill woven wool fabric samples are reported. It is expected that the results will assist to the wool coloration industries to improve the dyeing processes.

Complex Networks in Psychological Models

NASA Astrophysics Data System (ADS)

Wedemann, R. S.; Carvalho, L. S. A. V. D.; Donangelo, R.

We develop schematic, self-organizing, neural-network models to describe mechanisms associated with mental processes, by a neurocomputational substrate. These models are examples of real world complex networks with interesting general topological structures. Considering dopaminergic signal-to-noise neuronal modulation in the central nervous system, we propose neural network models to explain development of cortical map structure and dynamics of memory access, and unify different mental processes into a single neurocomputational substrate. Based on our neural network models, neurotic behavior may be understood as an associative memory process in the brain, and the linguistic, symbolic associative process involved in psychoanalytic working-through can be mapped onto a corresponding process of reconfiguration of the neural network. The models are illustrated through computer simulations, where we varied dopaminergic modulation and observed the self-organizing emergent patterns at the resulting semantic map, interpreting them as different manifestations of mental functioning, from psychotic through to normal and neurotic behavior, and creativity.

Automatization of hydrodynamic modelling in a Floreon+ system

NASA Astrophysics Data System (ADS)

Ronovsky, Ales; Kuchar, Stepan; Podhoranyi, Michal; Vojtek, David

2017-07-01

The paper describes fully automatized hydrodynamic modelling as a part of the Floreon+ system. The main purpose of hydrodynamic modelling in the disaster management is to provide an accurate overview of the hydrological situation in a given river catchment. Automatization of the process as a web service could provide us with immediate data based on extreme weather conditions, such as heavy rainfall, without the intervention of an expert. Such a service can be used by non scientific users such as fire-fighter operators or representatives of a military service organizing evacuation during floods or river dam breaks. The paper describes the whole process beginning with a definition of a schematization necessary for hydrodynamic model, gathering of necessary data and its processing for a simulation, the model itself and post processing of a result and visualization on a web service. The process is demonstrated on a real data collected during floods in our Moravian-Silesian region in 2010.

Dissociation between recognition and detection advantage for facial expressions: a meta-analysis.

PubMed

Nummenmaa, Lauri; Calvo, Manuel G

2015-04-01

Happy facial expressions are recognized faster and more accurately than other expressions in categorization tasks, whereas detection in visual search tasks is widely believed to be faster for angry than happy faces. We used meta-analytic techniques for resolving this categorization versus detection advantage discrepancy for positive versus negative facial expressions. Effect sizes were computed on the basis of the r statistic for a total of 34 recognition studies with 3,561 participants and 37 visual search studies with 2,455 participants, yielding a total of 41 effect sizes for recognition accuracy, 25 for recognition speed, and 125 for visual search speed. Random effects meta-analysis was conducted to estimate effect sizes at population level. For recognition tasks, an advantage in recognition accuracy and speed for happy expressions was found for all stimulus types. In contrast, for visual search tasks, moderator analysis revealed that a happy face detection advantage was restricted to photographic faces, whereas a clear angry face advantage was found for schematic and "smiley" faces. Robust detection advantage for nonhappy faces was observed even when stimulus emotionality was distorted by inversion or rearrangement of the facial features, suggesting that visual features primarily drive the search. We conclude that the recognition advantage for happy faces is a genuine phenomenon related to processing of facial expression category and affective valence. In contrast, detection advantages toward either happy (photographic stimuli) or nonhappy (schematic) faces is contingent on visual stimulus features rather than facial expression, and may not involve categorical or affective processing. (c) 2015 APA, all rights reserved).

Inventory and comparative evaluation of seabed mapping, classification and modeling activities in the Northwest Atlantic, USA to support regional ocean planning

NASA Astrophysics Data System (ADS)

Shumchenia, Emily J.; Guarinello, Marisa L.; Carey, Drew A.; Lipsky, Andrew; Greene, Jennifer; Mayer, Larry; Nixon, Matthew E.; Weber, John

2015-06-01

Efforts are in motion globally to address coastal and marine management needs through spatial planning and concomitant seabed habitat mapping. Contrasting strategies are often evident in these processes among local, regional, national and international scientific approaches and policy needs. In answer to such contrasts among its member states, the United States Northeast Regional Ocean Council formed a Habitat Working Group to conduct a regional inventory and comparative evaluation of seabed characterization, classification, and modeling activities in New England. The goals of this effort were to advance regional understanding of ocean habitats and identify opportunities for collaboration. Working closely with the Habitat Working Group, we organized and led the inventory and comparative analysis with a focus on providing processes and tools that can be used by scientists and managers, updated and adapted for future use, and applied in other ocean management regions throughout the world. Visual schematics were a critical component of the comparative analysis and aided discussion among scientists and managers. Regional consensus was reached on a common habitat classification scheme (U.S. Coastal and Marine Ecological Classification Standard) for regional seabed maps. Results and schematics were presented at a region-wide workshop where further steps were taken to initiate collaboration among projects. The workshop culminated in an agreement on a set of future seabed mapping goals for the region. The work presented here may serve as an example to other ocean planning regions in the U.S., Europe or elsewhere seeking to integrate a variety of seabed characterization, classification and modeling activities.

Microgravity

NASA Image and Video Library

2001-06-01

The schematic depicts the major elements and flow patterns inside the NASA Bioreactor system. Waste and fresh medium are contained in plastic bags placed side-by-side so the waste bag fills as the fresh medium bag is depleted. The compliance vessel contains a bladder to accommodate pressure transients that might damage the system. A peristolic pump moves fluid by squeezing the plastic tubing, thus avoiding potential contamination. The work is sponsored by NASA's Office of Biological and Physical Research. The bioreactor is managed by the Biotechnology Cell Science Program at NASA's Johnson Space Center (JSC). NASA-sponsored bioreactor research has been instrumental in helping scientists to better understand normal and cancerous tissue development. In cooperation with the medical community, the bioreactor design is being used to prepare better models of human colon, prostate, breast and ovarian tumors. Cartilage, bone marrow, heart muscle, skeletal muscle, pancreatic islet cells, liver and kidney are just a few of the normal tissues being cultured in rotating bioreactors by investigators.

Ethiopia's Grand Renaissance Dam: Implications for Downstream Riparian Countries

NASA Astrophysics Data System (ADS)

Zhang, Y.; Block, P. J.; Hammond, M.; King, A.

2013-12-01

Ethiopia has begun seriously developing their significant hydropower potential by launching construction of the Grand Ethiopian Renaissance Dam (GERD) on the Blue Nile River to facilitate local and regional growth. Although this has required substantial planning on Ethiopia's part, no policy dictating the reservoir filling rate strategy has been publicly issued. This filling stage will have clear implications on downstream flows in Sudan and Egypt, complicated by evaporative losses, climate variability, and climate change. In this study, various filling policies and future climate states are simultaneously explored to infer potential streamflow reductions at Lake Nasser, providing regional decision-makers with a set of plausible, justifiable, and comparable outcomes. Schematic of the model framework Box plots of 2017-2032 percent change in annual average streamflow at Lake Nasser for each filling policy constructed from the 100 time-series and weighted precipitation changes. All values are relative to the no dam policy and no changes to future precipitation.

Transferring vertically aligned carbon nanotubes onto a polymeric substrate using a hot embossing technique for microfluidic applications.

PubMed

Mathur, A; Roy, S S; McLaughlin, J A

2010-07-06

We explored the hot embossing method for transferring vertically aligned carbon nanotubes (CNTs) into microfluidic channels, fabricated on poly-methyl-methacrylate (PMMA). Patterned and unpatterned CNTs were synthesized by microwave plasma-enhanced chemical vapour deposition on silicon to work as a stamp. For hot embossing, 115 degrees C and 1 kN force for 2 min were found to be the most suitable parameters for the complete transfer of aligned CNTs on the PMMA microchannel. Raman and SEM studies were used to analyse the microstructure of CNTs before and after hot embossing. The PMMA microparticles with dimensions (approx. 10 microm in diameter) similar to red blood cells were successfully filtered using laminar flow through these microfluidic channels. Finally, a microfluidic-based point-of-care device for blood filtration and detection of bio-molecules is drawn schematically.

Transferring vertically aligned carbon nanotubes onto a polymeric substrate using a hot embossing technique for microfluidic applications

PubMed Central

Mathur, A.; Roy, S. S.; McLaughlin, J. A.

2010-01-01

We explored the hot embossing method for transferring vertically aligned carbon nanotubes (CNTs) into microfluidic channels, fabricated on poly-methyl-methacrylate (PMMA). Patterned and unpatterned CNTs were synthesized by microwave plasma-enhanced chemical vapour deposition on silicon to work as a stamp. For hot embossing, 115°C and 1 kN force for 2 min were found to be the most suitable parameters for the complete transfer of aligned CNTs on the PMMA microchannel. Raman and SEM studies were used to analyse the microstructure of CNTs before and after hot embossing. The PMMA microparticles with dimensions (approx. 10 µm in diameter) similar to red blood cells were successfully filtered using laminar flow through these microfluidic channels. Finally, a microfluidic-based point-of-care device for blood filtration and detection of bio-molecules is drawn schematically. PMID:20147316

Average dimension and magnetic structure of the distant Venus magnetotail

NASA Technical Reports Server (NTRS)

Saunders, M. A.; Russell, C. T.

1986-01-01

The first major statistical investigation of the far wake of an unmagnetized object embedded in the solar wind is reported. The investigation is based on Pioneer Venus Orbiter magnetometer data from 70 crossings of the Venus wake at altitudes between 5 and 11 Venus radii during reasonably steady IMF conditions. It is found that Venus has a well-developed-tail, flaring with altitude and possibly broader in the direction parallel to the IMF cross-flow component. Tail lobe field polarities and the direction of the cross-tail field are consistent with tail accretion from the solar wind. Average values for the cross-tail field (2 nT) and the distant tail flux (3 MWb) indicate that most distant tail field lines close across the center of the tail and are not rooted in the Venus ionosphere. The findings are illustrated in a three-dimensional schematic.

Multiple source heat pump

DOEpatents

Ecker, Amir L.

1983-01-01

A heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating a fluid in heat exchange relationship with a refrigerant fluid, at least three refrigerant heat exchangers, one for effecting heat exchange with the fluid, a second for effecting heat exchange with a heat exchange fluid, and a third for effecting heat exchange with ambient air; a compressor for compressing the refrigerant; at least one throttling valve connected at the inlet side of a heat exchanger in which liquid refrigerant is vaporized; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circuit and pump for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and directional flow of refrigerant therethrough for selecting a particular mode of operation. Also disclosed are a variety of embodiments, modes of operation, and schematics therefor.

Applications of space-electrophoresis in medicine. [for cellular separations in molecular biology

NASA Technical Reports Server (NTRS)

Bier, M.

1976-01-01

The nature of electrophoresis is reviewed and potential advances realizable in the field of biology and medicine from a space electrophoresis facility are examined. The ground-based applications of electrophoresis: (1) characterization of an ionized species; (2) determination of the quantitative composition of a complex mixture; and (3) isolation of the components of a mixture, separation achieved on the basis of the difference in transport rates is reviewed. The electrophoresis of living cells is considered, touching upon the following areas: the separation of T and B lymphocytes; the genetic influence on mouse lymphocyte mobilities; the abnormal production of specific and monoclonal immunoproteins; and the study of cancer. Schematic diagrams are presented of three types of electrophoresis apparatus: the column assembly for the static electrophoresis experiment on the Apollo-Soyuz mission, the continuous flow apparatus used in the same mission and a miniaturized electrophoresis apparatus.

Validation of structural analysis methods using the in-house liner cyclic rigs

NASA Technical Reports Server (NTRS)

Thompson, R. L.

1982-01-01

Test conditions and variables to be considered in each of the test rigs and test configurations, and also used in the validation of the structural predictive theories and tools, include: thermal and mechanical load histories (simulating an engine mission cycle; different boundary conditions; specimens and components of different dimensions and geometries; different materials; various cooling schemes and cooling hole configurations; several advanced burner liner structural design concepts; and the simulation of hot streaks. Based on these test conditions and test variables, the test matrices for each rig and configurations can be established to verify the predictive tools over as wide a range of test conditions as possible using the simplest possible tests. A flow chart for the thermal/structural analysis of a burner liner and how the analysis relates to the tests is shown schematically. The chart shows that several nonlinear constitutive theories are to be evaluated.

Control strategy of an electrically actuated morphing flap for the next generation green regional aircraft

NASA Astrophysics Data System (ADS)

Arena, Maurizio; Noviello, Maria Chiara; Rea, Francesco; Amoroso, Francesco; Pecora, Rosario

2018-03-01

The design and application of adaptive devices are currently ambitious targets in the field of aviation research addressed at new generation aircraft. The development of intelligent structures involves aspects of multidisciplinary nature: the combination of compact architectures, embedded electrical systems and smart materials, allows for developing a highly innovative device. The paper aims to present the control system design of an innovative morphing flap tailored for the next generation regional aircraft, within Clean Sky 2 - Airgreen 2 European Research Scenario. A distributed system of electromechanical actuators (EMAs) has been sized to enable up to three operating modes of a structure arranged in four blocks along the chord-wise direction: •overall camber-morphing; •upwards/downwards deflection and twisting of the final tip segment. A state-of-art feedback logic based on a decentralized control strategy for shape control is outlined, including the results of dynamic stability analysis based on the blocks rational schematization within Matlab/Simulink® environment. Such study has been performed implementing a state-space model, considering also design parameters as the torsional stiffness and damping of the actuation chain. The design process is flowing towards an increasingly "robotized" system, which can be externally controlled to perform certain operations. Future developments will be the control laws implementation as well as the functionality test on a real flap prototype.

System Testing of Ground Cooling System Components

NASA Technical Reports Server (NTRS)

Ensey, Tyler Steven

2014-01-01

This internship focused primarily upon software unit testing of Ground Cooling System (GCS) components, one of the three types of tests (unit, integrated, and COTS/regression) utilized in software verification. Unit tests are used to test the software of necessary components before it is implemented into the hardware. A unit test determines that the control data, usage procedures, and operating procedures of a particular component are tested to determine if the program is fit for use. Three different files are used to make and complete an efficient unit test. These files include the following: Model Test file (.mdl), Simulink SystemTest (.test), and autotest (.m). The Model Test file includes the component that is being tested with the appropriate Discrete Physical Interface (DPI) for testing. The Simulink SystemTest is a program used to test all of the requirements of the component. The autotest tests that the component passes Model Advisor and System Testing, and puts the results into proper files. Once unit testing is completed on the GCS components they can then be implemented into the GCS Schematic and the software of the GCS model as a whole can be tested using integrated testing. Unit testing is a critical part of software verification; it allows for the testing of more basic components before a model of higher fidelity is tested, making the process of testing flow in an orderly manner.

Design of fast signal processing readout front-end electronics implemented in CMOS 40 nm technology

NASA Astrophysics Data System (ADS)

Kleczek, Rafal

2016-12-01

The author presents considerations on the design of fast readout front-end electronics implemented in a CMOS 40 nm technology with an emphasis on the system dead time, noise performance and power dissipation. The designed processing channel consists of a charge sensitive amplifier with different feedback types (Krummenacher, resistive and constant current blocks), a threshold setting block, a discriminator and a counter with logic circuitry. The results of schematic and post-layout simulations with randomly generated input pulses in a time domain according to the Poisson distribution are presented and analyzed. Dead time below 20 ns is possible while keeping noise ENC ≈ 90 e- for a detector capacitance CDET = 160 fF.

Electro-optic architecture for servicing sensors and actuators in advanced aircraft propulsion systems

NASA Technical Reports Server (NTRS)

Poppel, G. L.; Glasheen, W. M.

1989-01-01

A detailed design of a fiber optic propulsion control system, integrating favored sensors and electro-optics architecture is presented. Layouts, schematics, and sensor lists describe an advanced fighter engine system model. Components and attributes of candidate fiber optic sensors are identified, and evaluation criteria are used in a trade study resulting in favored sensors for each measurand. System architectural ground rules were applied to accomplish an electro-optics architecture for the favored sensors. A key result was a considerable reduction in signal conductors. Drawings, schematics, specifications, and printed circuit board layouts describe the detailed system design, including application of a planar optical waveguide interface.

Origin, development, and evolution of butterfly eyespots.

PubMed

Monteiro, Antónia

2015-01-07

This article reviews the latest developments in our understanding of the origin, development, and evolution of nymphalid butterfly eyespots. Recent contributions to this field include insights into the evolutionary and developmental origin of eyespots and their ancestral deployment on the wing, the evolution of eyespot number and eyespot sexual dimorphism, and the identification of genes affecting eyespot development and black pigmentation. I also compare features of old and more recently proposed models of eyespot development and propose a schematic for the genetic regulatory architecture of eyespots. Using this schematic I propose two hypotheses for why we observe limits to morphological diversity across these serially homologous traits.

Brueckner G -matrix approach for neutron-proton pairing correlations in the deformed BCS approach

NASA Astrophysics Data System (ADS)

Ha, Eunja; Cheoun, Myung-Ki; Šimkovic, F.

2015-10-01

Ground states of even-even Ge isotopes with mass number A =64 -76 have been studied in the deformed Bardeen-Cooper-Schrieffer (BCS) theory by taking neutron-proton (n p ) pairing correlations as well as neutron-neutron (n n ) and proton-proton (p p ) pairing correlations. The n p pairing has two different modes J =0 ,T =1 (isotriplet) and J =1 ,T =0 (isosinglet). In this work, the Brueckner G matrix, based on the CD-Bonn potential, has been exploited to reduce the ambiguity regarding nucleon-nucleon interactions inside nuclei compared to the results by a simple schematic phenomenological force. We found that the G matrix plays important roles to obtain reasonable descriptions of even-even nuclei compared to the schematic force. The n p pairing strength has been shown to have a clear correlation with quadrupole deformation parameter β2 for the isotopes, and affects the smearing of the Fermi surfaces of not only N =Z nuclei but also N ≠Z nuclei. In particular, the coexistence of the like particle (n n and p p ) and the n p pairing modes was found to become more salient by the G -matrix approach than by the schematic force approach.

Alkaline solution absorption of carbon dioxide method and apparatus

DOEpatents

Hobbs, D.T.

1991-01-01

Disclosed is a method for measuring the concentration of hydroxides (or pH) in alkaline solutions, using the tendency of hydroxides to adsorb CO{sub 2}. The method comprises passing CO{sub 2} over the surface of an alkaline solution in a remote tank before and after measurements of the CO{sub 2} concentration. Comparison of the measurements yields the adsorption fraction from which the hydroxide concentration can be calculated using a correlation of hydroxide or pH to adsorption fraction. A schematic is given of a process system according to a preferred embodiment of the invention. 2 figs.

Strain Engineering of Epitaxially Transferred, Ultrathin Layers of III-V Semiconductor on Insulator

DTIC Science & Technology

2011-01-01

The structure of the source wafer is shown schematically in Fig. 2a, with both InAs and AlGaSb layers coherently strained to the GaSb 001...is due to the surface plasmon-LO phonon FIG. 2. Color online a The structure of GaSb /AlGaSb/InAs source wafer with an assumed strain state for...insulator layers obtained from an epitaxial transfer process is studied. The as-grown InAs epilayer 10–20 nm thick on the GaSb /AlGaSb source wafer has the

A combined histological and MRI brain atlas of the common marmoset monkey, Callithrix jacchus.

PubMed

Newman, John D; Kenkel, William M; Aronoff, Emily C; Bock, Nicholas A; Zametkin, Molly R; Silva, Afonso C

2009-12-11

The common marmoset, Callithrix jacchus, is of growing importance for research in neuroscience and related fields. In the present work, we describe a combined histological and magnetic resonance imaging (MRI) atlas constructed from the brains of two adult female marmosets. Histological sections were processed from Nissl staining and digitized to produce an atlas in a large format that facilitates visualization of structures with significant detail. Naming of identifiable brain structures was performed utilizing current terminology. The histological sections and a simplified schematic atlas are available online at http://udn.nichd.nih.gov/brainatlas_home.html.

3-D Flow Visualization with a Light-field Camera

NASA Astrophysics Data System (ADS)

Thurow, B.

2012-12-01

Light-field cameras have received attention recently due to their ability to acquire photographs that can be computationally refocused after they have been acquired. In this work, we describe the development of a light-field camera system for 3D visualization of turbulent flows. The camera developed in our lab, also known as a plenoptic camera, uses an array of microlenses mounted next to an image sensor to resolve both the position and angle of light rays incident upon the camera. For flow visualization, the flow field is seeded with small particles that follow the fluid's motion and are imaged using the camera and a pulsed light source. The tomographic MART algorithm is then applied to the light-field data in order to reconstruct a 3D volume of the instantaneous particle field. 3D, 3C velocity vectors are then determined from a pair of 3D particle fields using conventional cross-correlation algorithms. As an illustration of the concept, 3D/3C velocity measurements of a turbulent boundary layer produced on the wall of a conventional wind tunnel are presented. Future experiments are planned to use the camera to study the influence of wall permeability on the 3-D structure of the turbulent boundary layer.Schematic illustrating the concept of a plenoptic camera where each pixel represents both the position and angle of light rays entering the camera. This information can be used to computationally refocus an image after it has been acquired. Instantaneous 3D velocity field of a turbulent boundary layer determined using light-field data captured by a plenoptic camera.

A Fuzzy Control System for Reducing Urban Runoff by a Stormwater Storage Tank

NASA Astrophysics Data System (ADS)

Zhang, P.; Cai, Y.; Wang, J.

2017-12-01

Stormwater storage tank (SST) is a popular low impact development technology for reducing stormwater runoff in the construction of sponge city. Most researches on SST were mainly the design, pollutants removal effect, and operation assessment. While there were few researches on the automatic control of SST for reducing peak flow. In this paper, fuzzy control was introduced into the peak control of SST to improve the efficiency of reducing stormawter runoff. Firstly, the design of SST was investigated. A catchment area and return period were assumed, a SST model was manufactured, and then the storage capacity of the SST was verified. Secondly, the control parameters of the SST based on reducing stormwater runoff was analyzed, and a schematic diagram of real-time control (RTC) system based on peak control SST was established. Finally, fuzzy control system of a double input (flow and water level) and double output (inlet and outlet valve) was designed. The results showed that 1) under the different return periods (one year, three years, five years), the SST had the effect of delayed peak control and storage by increasing the detention time, 2) rainfall, pipeline flow, the influent time and the water level in the SST could be used as RTC parameters, and 3) the response curves of flow velocity and water level fluctuated very little and reached equilibrium in a short time. The combination of online monitoring and fuzzy control was feasible to control the SST automatically. This paper provides a theoretical reference for reducing stormwater runoff and improving the operation efficiency of SST.

Incremental retinal-defocus theory of myopia development--schematic analysis and computer simulation.

PubMed

Hung, George K; Ciuffreda, Kenneth J

2007-07-01

Previous theories of myopia development involved subtle and complex processes such as the sensing and analyzing of chromatic aberration, spherical aberration, spatial gradient of blur, or spatial frequency content of the retinal image, but they have not been able to explain satisfactorily the diverse experimental results reported in the literature. On the other hand, our newly proposed incremental retinal-defocus theory (IRDT) has been able to explain all of these results. This theory is based on a relatively simple and direct mechanism for the regulation of ocular growth. It states that a time-averaged decrease in retinal-image defocus area decreases the rate of release of retinal neuromodulators, which decreases the rate of retinal proteoglycan synthesis with an associated decrease in scleral structural integrity. This increases the rate of scleral growth, and in turn the eye's axial length, which leads to myopia. Our schematic analysis has provided a clear explanation for the eye's ability to grow in the appropriate direction under a wide range of experimental conditions. In addition, the theory has been able to explain how repeated cycles of nearwork-induced transient myopia leads to repeated periods of decreased retinal-image defocus, whose cumulative effect over an extended period of time results in an increase in axial growth that leads to permanent myopia. Thus, this unifying theory forms the basis for understanding the underlying retinal and scleral mechanisms of myopia development.

Ribbons characterize magnetohydrodynamic magnetic fields better than lines: a lesson from dynamo theory

NASA Astrophysics Data System (ADS)

Blackman, Eric G.; Hubbard, Alexander

2014-08-01

Blackman and Brandenburg argued that magnetic helicity conservation in dynamo theory can in principle be captured by diagrams of mean field dynamos when the magnetic fields are represented by ribbons or tubes, but not by lines. Here, we present such a schematic ribbon diagram for the α2 dynamo that tracks magnetic helicity and provides distinct scales of large-scale magnetic helicity, small-scale magnetic helicity, and kinetic helicity involved in the process. This also motivates our construction of a new `2.5 scale' minimalist generalization of the helicity-evolving equations for the α2 dynamo that separately allows for these three distinct length-scales while keeping only two dynamical equations. We solve these equations and, as in previous studies, find that the large-scale field first grows at a rate independent of the magnetic Reynolds number RM before quenching to an RM-dependent regime. But we also show that the larger the ratio of the wavenumber where the small-scale current helicity resides to that of the forcing scale, the earlier the non-linear dynamo quenching occurs, and the weaker the large-scale field is at the turnoff from linear growth. The harmony between the theory and the schematic diagram exemplifies a general lesson that magnetic fields in magnetohydrodynamic are better visualized as two-dimensional ribbons (or pairs of lines) rather than single lines.

Utilizing OODB schema modeling for vocabulary management.

PubMed Central

Gu, H.; Cimino, J. J.; Halper, M.; Geller, J.; Perl, Y.

1996-01-01

Comprehension of complex controlled vocabularies is often difficult. We present a method, facilitated by an object-oriented database, for depicting such a vocabulary (the Medical Entities Dictionary (MED) from the Columbia-Presbyterian Medical Center) in a schematic way which uses a sparse inheritance network of area classes. The resulting Object Oriented Health Vocabulary repository (OOHVR) allows visualization of the 43,000 MED concepts as 90 area classes. This view has provided valuable information to those responsible with maintaining the MED. As a result, the MED organization has been improved and some previously-unrecognized errors and inconsistencies have been removed. We believe that this schematic approach allows improved comprehension of the gestalt of large controlled medical vocabulary. PMID:8947671

CO2 storage capacity estimates from fluid dynamics (Invited)

NASA Astrophysics Data System (ADS)

Juanes, R.; MacMinn, C. W.; Szulczewski, M.

2009-12-01

We study a sharp-interface mathematical model for the post-injection migration of a plume of CO2 in a deep saline aquifer under the influence of natural groundwater flow, aquifer slope, gravity override, and capillary trapping. The model leads to a nonlinear advection-diffusion equation, where the diffusive term describes the upward spreading of the CO2 against the caprock. We find that the advective terms dominate the flow dynamics even for moderate gravity override. We solve the model analytically in the hyperbolic limit, accounting rigorously for the injection period—using the true end-of-injection plume shape as an initial condition. We extend the model by incorporating the effect of CO2 dissolution into the brine, which—we find—is dominated by convective mixing. This mechanism enters the model as a nonlinear sink term. From a linear stability analysis, we propose a simple estimate of the convective dissolution flux. We then obtain semi-analytic estimates of the maximum plume migration distance and migration time for complete trapping. Our analytical model can be used to estimate the storage capacity (from capillary and dissolution trapping) at the geologic basin scale, and we apply the model to various target formations in the United States. Schematic of the migration of a CO2 plume at the geologic basin scale. During injection, the CO2 forms a plume that is subject to gravity override. At the end of the injection, all the CO2 is mobile. During the post-injection period, the CO2 migrates updip and also driven by regional groundwater flow. At the back end of the plume, where water displaces CO2, the plume leaves a wake or residual CO2 due to capillary trapping. At the bottom of the moving plume, CO2 dissolves into the brine—a process dominated by convective mixing. These two mechanisms—capillary trapping and convective dissolution—reduce the size of the mobile plume as it migrates. In this communication, we present an analytical model that predicts the migration distance and time for complete trapping. This is used to estimate storage capacity of geologic formations at the basin scale.

In Situ Fabrication Technologies: Meeting the Challenge for Exploration

NASA Technical Reports Server (NTRS)

Howard, Richard W.

2005-01-01

A viewgraph presentation on Lunar and Martian in situ fabrication technologies meeting the challenges for exploration is shown. The topics include: 1) Exploration Vision; 2) Vision Requirements Early in the Program; 3) Vision Requirements Today; 4) Why is ISFR Technology Needed? 5) ISFR and In Situ Resource Utilization (ISRU); 6) Fabrication Feedstock Considerations; 7) Planetary Resource Primer; 8) Average Chemical Element Abundances in Lunar Soil; 9) Chemical Elements in Aerospace Engineering Materials; 10) Schematic of Raw Regolith Processing into Constituent Components; 11) Iron, Aluminum, and Basalt Processing from Separated Elements and Compounds; 12) Space Power Systems; 13) Power Source Applicability; 14) Fabrication Systems Technologies; 15) Repair and Nondestructive Evaluation (NDE); and 16) Habitat Structures. A development overview of Lunar and Martian repair and nondestructive evaluation is also presented.

Global scale groundwater flow model

NASA Astrophysics Data System (ADS)

Sutanudjaja, Edwin; de Graaf, Inge; van Beek, Ludovicus; Bierkens, Marc

2013-04-01

As the world's largest accessible source of freshwater, groundwater plays vital role in satisfying the basic needs of human society. It serves as a primary source of drinking water and supplies water for agricultural and industrial activities. During times of drought, groundwater sustains water flows in streams, rivers, lakes and wetlands, and thus supports ecosystem habitat and biodiversity, while its large natural storage provides a buffer against water shortages. Yet, the current generation of global scale hydrological models does not include a groundwater flow component that is a crucial part of the hydrological cycle and allows the simulation of groundwater head dynamics. In this study we present a steady-state MODFLOW (McDonald and Harbaugh, 1988) groundwater model on the global scale at 5 arc-minutes resolution. Aquifer schematization and properties of this groundwater model were developed from available global lithological model (e.g. Dürr et al., 2005; Gleeson et al., 2010; Hartmann and Moorsdorff, in press). We force the groundwtaer model with the output from the large-scale hydrological model PCR-GLOBWB (van Beek et al., 2011), specifically the long term net groundwater recharge and average surface water levels derived from routed channel discharge. We validated calculated groundwater heads and depths with available head observations, from different regions, including the North and South America and Western Europe. Our results show that it is feasible to build a relatively simple global scale groundwater model using existing information, and estimate water table depths within acceptable accuracy in many parts of the world.

Effect of the prosthetic mitral valve on vortex dynamics and turbulence of the left ventricular flow

NASA Astrophysics Data System (ADS)

Querzoli, G.; Fortini, S.; Cenedese, A.

2010-04-01

Mechanical heart valves implanted in mitral position have a great effect on the ventricular flow. Changes include alteration of the dynamics of the vortical structures generated during the diastole and the onset of turbulence, possibly affecting the efficiency of the heart pump or causing blood cell damage. Modifications to the hemodynamics in the left ventricle, when the inflow through the mitral orifice is altered, were investigated in vitro using a silicone rubber, flexible ventricle model. Velocity fields were measured in space and time by means of an image analysis technique: feature tracking. Three series of experiments were performed: one with a top hat inflow velocity profile (schematically resembling physiological conditions), and two with mechanical prosthetic valves of different design, mounted in mitral position—one monoleaflet and the other bileaflet. In each series of runs, two different cardiac outputs have been examined by changing the stroke volume. The flow was investigated in terms of phase averaged velocity field and second order moments of turbulent fluctuations. Results show that the modifications in the transmitral flow change deeply the interaction between the coherent structures generated during the first phase of the diastole and the incoming jet during the second diastolic phase. Top hat inflow gives the coherent structures which are optimal, among the compared cases, for the systolic function. The flow generated by the bileaflet valve preserves most of the beneficial features of the top hat inflow, whereas the monoleaflet valve generates a strong jet which discourages the permanence of large coherent structures at the end of the diastole. Moreover, the average shear rate magnitudes induced by the smoother flow pattern of the case of top hat inflow are nearly halved in comparison with the values measured with the mechanical valves. Finally, analysis of the turbulence statistics shows that the monoleaflet valves yield higher turbulence intensity in comparison with the bileaflet and, with top hat inflow, there is not a complete transition to turbulence.

The effect of growth temperature variation on partially bismuth filled carbon nanotubes synthesis using a soft semi-metallic template.

PubMed

Sahoo, R K; Jacob, C

2014-06-01

The dewetting of a low melting point metal thin film deposited on silicon substrates was studied. The experimental results suggest that the change in the growth temperature affects the nanostructures that form. Based on the experimental results, the temperature which yielded the smallest features for the growth of nanotubes is determined. The mechanism by which these nano-templates become an efficient seeds for the growth of the carbon nanotubes is discussed. The partial bismuth filling inside the CNTs was optimized. Based on the results, a schematic growth model for better understanding of the process parameters has also been proposed.

Proposed Space Flight Experiment Hardware

NASA Technical Reports Server (NTRS)

2003-01-01

The primary thrust for this plan is to develop design tools and fundamental understanding that are timely and consistent with the goal of the various exploration initiatives. The plan will utilize ISS facilities, such as the Fluids Integrated Rack (FIR) and the Microgravity Science Glovebox (MSG). A preliminary flow schematic of Two-Phase Flow Facility (T(phi)FFy) which would utilize FIR is shown in Figure 3. MSG can be utilized to use the Boiling eXperiment Facility (BXF) and Contact Line Dynamics Experiment (CLiDE) Facility. The T(phi)FFy system would have multiple test sections whereby different configurations of heat exchangers could be used to study boiling and condensation phenomena. The test sections would be instrumented for pressure drop, void fraction, heat fluxes, temperatures, high-speed imaging and other diagnostics. Besides a high-speed data acquisition system with a large data storage capability, telemetry could be used to update control and test parameters and download limited amounts of data. In addition, there would be multiple accumulators that could be used to investigate system stability and fluid management issues. The system could accommodate adiabatic tests through either the space station nitrogen supply or have an experiment-specific compressor to pressurize a sufficient amount of air or other non-condensable gas for reuse as the supply bottle is depleted.

Matter-wave teleportation via cavity-field trans-pads

NASA Astrophysics Data System (ADS)

Ul-Islam, Rameez; Awais Haider, Syed; Abbas, Tasawar; Ikram, Manzoor

2016-10-01

We propose experimentally feasible schematics to teleport one of the major attributes of matter—i.e. atomic motion in the momentum space—with the assistance of Bragg regime atom-cavity field interactions. In this context, the procedure for teleportation of a superposition of the external momentum of a neutral atom along with its atomic momentum Bell state is described in detail. The protocol is then generalized to cover the teleportation of any high-dimensional entangled state. Such schematics based on a hybrid system—i.e. atoms and photons—may solve a long standing problem by efficiently closing both the detection as well as locality loopholes simultaneously for Bell’s inequality testing, an option not available with either photons or atoms alone.

Coastal Wind and Turbulence Observations during the Morning and Evening Transitions over Tropical Terrain

DOE PAGES

Jensen, Derek D.; Price, Timothy A.; Nadeau, Daniel F.; ...

2017-12-15

Data collected during a multiyear, wind-resource assessment over a multi-land-use coastal environment in Belize are used to study the development and decay of wind and turbulence through the morning and evening transitions. Observations were made on three tall masts, forming an inland transect of approximately 5 km. The wind distribution is found to be bimodal and governed by synoptic scales, with onshore and offshore flow regimes. The behavior between the coastal and inland sites is found to be very similar when the flow is directed offshore; for onshore flow, stark differences occur. The mean wind speed at the coastal sitemore » is approximately 20% greater than the most inland site and is nearly constant throughout the diurnal cycle. Furthermore, for both flow regimes, the influence of the land–sea breeze circulation is inconsequential relative to the large-scale synoptic forcing. Composite time series are used to study the evolution of sensible heat flux and turbulence kinetic energy (TKE) throughout the morning and evening transitions. The TKE budget reveals that at the coastal site mechanical production of TKE is much more important than buoyant production. This allows for the unexpected case in which TKE increases through the ET despite the decrease of buoyant TKE production. Multiresolution flux decomposition is used to further study this phenomenon as well as the evolution of the sensible heat flux at differing time scales. We present an idealized schematic to illustrate the timing and structure of the morning and evening transitions for an inland site and a coastal site that are subjected to similar synoptic forcing.« less

Coastal Wind and Turbulence Observations during the Morning and Evening Transitions over Tropical Terrain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jensen, Derek D.; Price, Timothy A.; Nadeau, Daniel F.

Data collected during a multiyear, wind-resource assessment over a multi-land-use coastal environment in Belize are used to study the development and decay of wind and turbulence through the morning and evening transitions. Observations were made on three tall masts, forming an inland transect of approximately 5 km. The wind distribution is found to be bimodal and governed by synoptic scales, with onshore and offshore flow regimes. The behavior between the coastal and inland sites is found to be very similar when the flow is directed offshore; for onshore flow, stark differences occur. The mean wind speed at the coastal sitemore » is approximately 20% greater than the most inland site and is nearly constant throughout the diurnal cycle. Furthermore, for both flow regimes, the influence of the land–sea breeze circulation is inconsequential relative to the large-scale synoptic forcing. Composite time series are used to study the evolution of sensible heat flux and turbulence kinetic energy (TKE) throughout the morning and evening transitions. The TKE budget reveals that at the coastal site mechanical production of TKE is much more important than buoyant production. This allows for the unexpected case in which TKE increases through the ET despite the decrease of buoyant TKE production. Multiresolution flux decomposition is used to further study this phenomenon as well as the evolution of the sensible heat flux at differing time scales. We present an idealized schematic to illustrate the timing and structure of the morning and evening transitions for an inland site and a coastal site that are subjected to similar synoptic forcing.« less

Inventory Control.

ERIC Educational Resources Information Center

Byrum, David L., Ed.

1984-01-01

Describes an electronic thermometer using a precision temperature sensor (includes detailed schematic of circuits) and inexpensive ring holders for round-bottomed flasks. Also describes a method for reducing funnel breakage. (JN)

Develop a Model Component

NASA Technical Reports Server (NTRS)

Ensey, Tyler S.

2013-01-01

During my internship at NASA, I was a model developer for Ground Support Equipment (GSE). The purpose of a model developer is to develop and unit test model component libraries (fluid, electrical, gas, etc.). The models are designed to simulate software for GSE (Ground Special Power, Crew Access Arm, Cryo, Fire and Leak Detection System, Environmental Control System (ECS), etc. .) before they are implemented into hardware. These models support verifying local control and remote software for End-Item Software Under Test (SUT). The model simulates the physical behavior (function, state, limits and 110) of each end-item and it's dependencies as defined in the Subsystem Interface Table, Software Requirements & Design Specification (SRDS), Ground Integrated Schematic (GIS), and System Mechanical Schematic.(SMS). The software of each specific model component is simulated through MATLAB's Simulink program. The intensiv model development life cycle is a.s follows: Identify source documents; identify model scope; update schedule; preliminary design review; develop model requirements; update model.. scope; update schedule; detailed design review; create/modify library component; implement library components reference; implement subsystem components; develop a test script; run the test script; develop users guide; send model out for peer review; the model is sent out for verifictionlvalidation; if there is empirical data, a validation data package is generated; if there is not empirical data, a verification package is generated; the test results are then reviewed; and finally, the user. requests accreditation, and a statement of accreditation is prepared. Once each component model is reviewed and approved, they are intertwined together into one integrated model. This integrated model is then tested itself, through a test script and autotest, so that it can be concluded that all models work conjointly, for a single purpose. The component I was assigned, specifically, was a fluid component, a discrete pressure switch. The switch takes a fluid pressure input, and if the pressure is greater than a designated cutoff pressure, the switch would stop fluid flow.

Development of the Functional Flow Block Diagram for the J-2X Rocket Engine System

NASA Technical Reports Server (NTRS)

White, Thomas; Stoller, Sandra L.; Greene, WIlliam D.; Christenson, Rick L.; Bowen, Barry C.

2007-01-01

The J-2X program calls for the upgrade of the Apollo-era Rocketdyne J-2 engine to higher power levels, using new materials and manufacturing techniques, and with more restrictive safety and reliability requirements than prior human-rated engines in NASA history. Such requirements demand a comprehensive systems engineering effort to ensure success. Pratt & Whitney Rocketdyne system engineers performed a functional analysis of the engine to establish the functional architecture. J-2X functions were captured in six major operational blocks. Each block was divided into sub-blocks or states. In each sub-block, functions necessary to perform each state were determined. A functional engine schematic consistent with the fidelity of the system model was defined for this analysis. The blocks, sub-blocks, and functions were sequentially numbered to differentiate the states in which the function were performed and to indicate the sequence of events. The Engine System was functionally partitioned, to provide separate and unique functional operators. Establishing unique functional operators as work output of the System Architecture process is novel in Liquid Propulsion Engine design. Each functional operator was described such that its unique functionality was identified. The decomposed functions were then allocated to the functional operators both of which were the inputs to the subsystem or component performance specifications. PWR also used a novel approach to identify and map the engine functional requirements to customer-specified functions. The final result was a comprehensive Functional Flow Block Diagram (FFBD) for the J-2X Engine System, decomposed to the component level and mapped to all functional requirements. This FFBD greatly facilitates component specification development, providing a well-defined trade space for functional trades at the subsystem and component level. It also provides a framework for function-based failure modes and effects analysis (FMEA), and a rigorous baseline for the functional architecture.

Selective Functionalization of Carbon Nanotubes: Part II

NASA Technical Reports Server (NTRS)

Meyyappan, Meyya; Khare, Bishun

2010-01-01

An alternative method of low-temperature plasma functionalization of carbon nanotubes provides for the simultaneous attachment of molecular groups of multiple (typically two or three) different species or different mixtures of species to carbon nanotubes at different locations within the same apparatus. This method is based on similar principles, and involves the use of mostly the same basic apparatus, as those of the methods described in "Low-Temperature Plasma Functionalization of Carbon Nanotubes" (ARC-14661-1), NASA Tech Briefs, Vol. 28, No. 5 (May 2004), page 45. The figure schematically depicts the basic apparatus used in the aforementioned method, with emphasis on features that distinguish the present alternative method from the other. In this method, one exploits the fact that the composition of the deposition plasma changes as the plasma flows from its source in the precursor chamber toward the nanotubes in the target chamber. As a result, carbon nanotubes mounted in the target chamber at different flow distances (d1, d2, d3 . . .) from the precursor chamber become functionalized with different species or different mixtures of species. In one series of experiments to demonstrate this method, N2 was used as the precursor gas. After the functionalization process, the carbon nanotubes from three different positions in the target chamber were examined by Fourier-transform infrared spectroscopy to identify the molecular groups that had become attached. On carbon nanotubes from d1 = 1 cm, the attached molecular groups were found to be predominantly C-N and C=N. On carbon nanotubes from d2 = 2.5 cm, the attached molecular groups were found to be predominantly C-(NH)2 and/or C=NH2. (The H2 was believed to originate as residual hydrogen present in the nanotubes.) On carbon nanotubes from d3 = 7 cm no functionalization could be detected - perhaps, it was conjectured, because this distance is downstream of the plasma source, all of the free ions and free radicals of the plasma had recombined into molecules.

A new model for the blown film process

NASA Astrophysics Data System (ADS)

Demay, Yves; Clamond, Didier

2011-11-01

Polymer films are generally manufactured by film blowing. In this process the polymer (a polyethylene for example) is molten in a screw extruder and forced into a tubular die (typical dimensions are several decimeters in diameter and about one mm in thickness). At extrusion, it forms a liquid tube which is simultaneously drawn in the vertical direction by nip rolls, inflated by an internal pressure and cooled by external air rings. Typical dimensions of the bubble at take up are 1 m or more in diameter and several 10 μm in thickness. From a mechanical point of view, it is an extensional thin layer flow. Readers not familiar with this process will find easily pictures and schematic descriptions with a web research using keywords blown film extrusion. In order to simplify, it is assumed that the temperature profile is known and that the molten polymer behaves as a Newtonian fluid. This crude rheological behavior allows to capture qualitatively an important part of observed phenomena. The classical model introduced by Pearson and Petrie in 1970 is based on three hypothesis: the polymer flow in air is steady and axisymmetric and the film is thin. It uses a tangent frame affixed to the membrane to describe kinematics and to compute stress and strain tensors. In this model the balance equations are written using a stretching force and a curvature equation. It results in a nonlinear system of differential equations for velocity, thickness, radius and stress components according to distance z to extrusion. Solution is then computed using a tedious shooting method to determine force and internal pressure. For stability reasons this system of equations is solved from take up to extrusion. In this Note we derive also balance equations according to a curvilinear abscissa s. It allows us to derive a coupled system of equations for velocity and geometry according to radius r. This strategy which is classically used to determine surfaces of revolution with given mean curvature is rather disconcerting to compute a stretching flow in z direction. However it leads to a model constituted of two coupled equations: Velocity is then solution of a Dirichlet boundary value problem of order two easily solved using a finite elements method; The profile curve of the bubble is solution of a highly nonlinear differential equation of order one leading to a singular integral. Internal pressure appears as a parameter allowing to impose an additional boundary condition. Despite the fact that the computation of the solution remains technical, this new model seems more natural from a mathematical point of view as it leads, on the one hand, to an elliptic equation to compute velocity, and on the other hand, to an equation of a classical type in differential geometry to determine the generatrix.

Flowing Plasma Interaction with an Electric Sail Tether Element

NASA Technical Reports Server (NTRS)

Schneider, Todd; Vaughn, Jason; Wright, Kenneth; Anderson, Allen; Stone, Nobie

2017-01-01

Harnessing the power of the solar wind, an Electric Sail, or E-sail, is a relatively new concept that promises to deliver high speed propellant-less propulsion. The electric sail is an invention made in 2006 at the Kumpula Space Centre in Finland by Pekka Janhunen [Janhunen and Sandroos, 2007]. At its core, an electric sail utilizes multiple positively biased tethers which exchange momentum with solar wind protons via the repelling electric field established around each tether, in other words, by reflecting the solar wind protons. Recognizing the solar wind is a plasma, the effective repelling area of each tether is increased significantly by the formation a plasma sheath around each tether. Fig. 1 shows schematically a spacecraft employing an electric sail. The positive voltage bias (greater than10kV) applied to each tether naturally results in electron collection. Therefore, the electric sail concept necessarily includes an electron source (electron gun) to return collected electrons to space and maintain the positive bias of the tether system.

Building HVAC control knowledge data schema – Towards a unified representation of control system knowledge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yan; Treado, Stephen J.; Messner, John I.

Building control systems for Heating, Ventilation, and Air Conditioning (HVAC) play a key role in realizing the functionality and operation of building systems and components. Building Control Knowledge (BCK) is the logic and algorithms embedded throughout building control system. There are different methods to represent the BCK. These methods differ in the selection of BCK representing elements and the format of those elements. There is a lack of standard data schema, for storing, retrieving, and reusing structured BCK. In this study, a modular data schema is created for BCK representation. The data schema contains eleven representing elements, i.e., control modulemore » name, operation mode, system schematic, control flow diagram, data point, alarm, parameter, control sequence, function, and programming code. Each element is defined with specific attributes. This data schema is evaluated through a case study demonstration. The demonstration shows a new way to represent the BCK with standard formats.« less

Development of an oximeter for neurology

NASA Astrophysics Data System (ADS)

Aleinik, A.; Serikbekova, Z.; Zhukova, N.; Zhukova, I.; Nikitina, M.

2016-06-01

Cerebral desaturation can occur during surgery manipulation, whereas other parameters vary insignificantly. Prolonged intervals of cerebral anoxia can cause serious damage to the nervous system. Commonly used method for measurement of cerebral blood flow uses invasive catheters. Other techniques include single photon emission computed tomography (SPECT), positron emission tomography (PET), magnetic resonance imaging (MRI). Tomographic methods frequently use isotope administration, that may result in anaphylactic reactions to contrast media and associated nerve diseases. Moreover, the high cost and the need for continuous monitoring make it difficult to apply these techniques in clinical practice. Cerebral oximetry is a method for measuring oxygen saturation using infrared spectrometry. Moreover reflection pulse oximetry can detect sudden changes in sympathetic tone. For this purpose the reflectance pulse oximeter for use in neurology is developed. Reflectance oximeter has a definite advantage as it can be used to measure oxygen saturation in any part of the body. Preliminary results indicate that the device has a good resolution and high reliability. Modern applied schematics have improved device characteristics compared with existing ones.

CF6 jet engine performance deterioration results

NASA Technical Reports Server (NTRS)

Lewis, R. J.; Humerickhouse, C. E.; Paas, J. E.

1978-01-01

The use of the performance baseline from the flight planning manual as a reference to measure changes in cruise fuel flow rates was discussed. For the CF6-6D engine, the introduction of design changes for performance and durability reasons was seen to introduce an average increment relative to this baseline of 3.2% WFM increase at Nl, 2.5% Fn increase at Nl, 0.8% specific fuel consumption (SFC) increase at Fn, and 7 C EGT increase at Nl, while maintaining sufficient SFC margin of the delivered airplane. The effect of revenue service deterioration and performance restoration relative to the reference was shown to be an adder on top of these design effects. A schematic of typical CF6-6D performance through revenue service and airline maintenance is presented in terms of percent cruise SFC relative to an airline datum point (average level upon entering revenue service). The typical changes in SFC margin are shown for airline revenue service through for installations and refurbishments.

A review of the hydrogeologic-geochemical model for Cerro Prieto

USGS Publications Warehouse

Lippmann, M.J.; Truesdell, A.H.; Halfman-Dooley, S. E.; Mañónm, A.

1991-01-01

With continued exploitation of the Cerro Prieto, Mexico, geothermal field, there is increasing evidence that the hydrogeologic model developed by Halfman and co-workers presents the basic features controlling the movement of geothermal fluids in the system. In mid-1987 the total installed capacity at Cerro Prieto reached 620 MWc, requiring a large rate of fluid production (more than 10,500 tonnes/hr of a brine-steam mixture; August 1988). This significant mass extraction has led to changes in reservoir thermodynamic conditions and in the chemistry of the produced fluids. Pressure drawdown has caused an increase in cold water recharge in the southern and western edges of the field, and local and general reservoir boiling in parts of the geothermal system. After reviewing the hydrogeologic and geochemical models of Cerro Prieto, the exploitation-induced cold water recharge and reservoir boiling (and plugging) observed in different areas of the field, are discussed and interpreted on the basis of these models and schematic flow models that describe the hydrogeology. ?? 1991.

Space station freedom resource nodes internal thermal control system

NASA Technical Reports Server (NTRS)

Merhoff, Paul; Dellinger, Brent; Taggert, Shawn; Cornwell, John

1993-01-01

This paper presents an overview of the design and operation of the internal thermal control system (ITCS) developed for Space Station Freedom by the NASA-Johnson Space Center and McDonnell Douglas Aerospace to provide cooling for the resource nodes, airlock, and pressurized logistics modules. The ITCS collects, transports and rejects waste heat from these modules by a dual-loop, single-phase water cooling system. ITCS performance, cooling, and flow rate requirements are presented. An ITCS fluid schematic is shown and an overview of the current baseline system design and its operation is presented. Assembly sequence of the ITCS is explained as its configuration develops from Man Tended Capability (MTC), for which node 2 alone is cooled, to Permanently Manned Capability (PMC) where the airlock, a pressurized logistics module, and node 1 are cooled, in addition to node 2. A SINDA/FLUINT math model of the ITCS is described, and results of analyses for an MTC and a PMC case are shown and discussed.

NEONATAL VISUAL INFORMATION PROCESSING IN COCAINE-EXPOSED AND NON-EXPOSED INFANTS

PubMed Central

Singer, Lynn T.; Arendt, Robert; Fagan, Joseph; Minnes, Sonia; Salvator, Ann; Bolek, Tina; Becker, Michael

2014-01-01

This study investigated early neonatal visual preferences in 267 poly drug exposed neonates (131 cocaine-exposed and 136 non-cocaine exposed) whose drug exposure was documented through interviews and urine and meconium drug screens. Infants were given four visual recognition memory tasks comparing looking time to familiarized stimuli of lattices and rectangular shapes to novel stimuli of a schematic face and curved hourglass and bull’s eye forms. Cocaine-exposed infants performed more poorly, after consideration of confounding factors, with a relationship of severity of cocaine exposure to lower novelty score found for both self-report and biologic measures of exposure, Findings support theories which link prenatal cocaine exposure to deficits in information processing entailing attentional and arousal organizational systems. Neonatal visual discrimination and attention tasks should be further explored as potentially sensitive behavioral indicators of teratologic effects. PMID:25717215

Study of inelastic processes in Li+-Ar, K+-Ar, and Na+-He collisions in the energy range 0.5-10 keV

NASA Astrophysics Data System (ADS)

Lomsadze, Ramaz A.; Gochitashvili, Malkhaz R.; Kezerashvili, Roman Ya; Schulz, Michael

2017-11-01

Absolute cross sections are measured for charge-exchange, ionization, and excitation processes within the same experimental setup for the Li{}+-Ar, K{}+-Ar, and Na{}+-He collisions in the ion energy range of 0.5-10 keV. The results of the measurements and schematic correlation diagrams are used to analyze and determine the mechanisms for these processes. The experimental results show that the charge-exchange processes occur with high probabilities and electrons are predominantly captured in ground states. The contributions of various partial inelastic channels to the total ionization cross section are estimated, and a primary mechanism for the process is identified. In addition, the energy-loss spectrum is applied in order to estimate the relative contribution of different inelastic channels, and to determine the mechanisms for the ionization and for some excitation processes of Ar resonance lines for the {{{K}}}+-Ar collision system. The excitation cross sections for the helium and for the sodium doublet lines for the Na{}+-He collision system both reveal some unexpected features. A mechanism to explain this observation is suggested.

All God's Chillun Got a Mama and a Papa?

ERIC Educational Resources Information Center

Hollander, Willard F.

1972-01-01

Describes alternate methods of schematically representing genetic lines of descent, and illustrates the different patterns obtained with random mating, line breeding, parthanogentic males, cloning, and grafting. (AL)

The autistic child's appraisal of expressions of emotion: a further study.

PubMed

Hobson, R P

1986-09-01

Autistic and matched non-autistic retarded children were selected for their ability to recognize the correspondence between schematic drawings and videotaped scenes involving people. The subjects of both groups were able to choose schematic drawings of gestures for a person's gestures of emotion enacted on videotape. However, the autistic children were significantly impaired in choosing which of the drawings of gestures should 'go with' videotaped vocalizations and facial expressions characteristic of four emotional states. The results were found to be consistent with results from a previous, related study in which the same subjects had chosen drawn or photographed faces to indicate their judgements of the same videotapes of emotional expression. It is suggested that these findings reflect an important aspect of autistic children's social disability.

Regional anatomy of the pedunculopontine nucleus: relevance for deep brain stimulation.

PubMed

Fournier-Gosselin, Marie-Pierre; Lipsman, Nir; Saint-Cyr, Jean A; Hamani, Clement; Lozano, Andres M

2013-09-01

The pedunculopontine nucleus (PPN) is currently being investigated as a potential deep brain stimulation target to improve gait and posture in Parkinson's disease. This review examines the complex anatomy of the PPN region and suggests a functional mapping of the surrounding nuclei and fiber tracts that may serve as a guide to a more accurate placement of electrodes while avoiding potentially adverse effects. The relationships of the PPN were examined in different human brain atlases. Schematic representations of those structures in the vicinity of the PPN were generated and correlated with their potential stimulation effects. By providing a functional map and representative schematics of the PPN region, we hope to optimize the placement of deep brain stimulation electrodes, thereby maximizing safety and clinical efficacy. © 2013 International Parkinson and Movement Disorder Society.

Biological Motion Primes the Animate/Inanimate Distinction in Infancy

PubMed Central

Poulin-Dubois, Diane; Crivello, Cristina; Wright, Kristyn

2015-01-01

Given that biological motion is both detected and preferred early in life, we tested the hypothesis that biological motion might be instrumental to infants’ differentiation of animate and inanimate categories. Infants were primed with either point-light displays of realistic biological motion, random motion, or schematic biological motion of an unfamiliar shape. After being habituated to these displays, 12-month-old infants categorized animals and vehicles as well as furniture and vehicles with the sequential touching task. The findings indicated that infants primed with point-light displays of realistic biological motion showed better categorization of animates than those exposed to random or schematic biological motion. These results suggest that human biological motion might be one of the motion cues that provide the building blocks for infants’ concept of animacy. PMID:25659077

Analyses of kinetic glass transition in short-range attractive colloids based on time-convolutionless mode-coupling theory.

PubMed

Narumi, Takayuki; Tokuyama, Michio

2017-03-01

For short-range attractive colloids, the phase diagram of the kinetic glass transition is studied by time-convolutionless mode-coupling theory (TMCT). Using numerical calculations, TMCT is shown to recover all the remarkable features predicted by the mode-coupling theory for attractive colloids: the glass-liquid-glass reentrant, the glass-glass transition, and the higher-order singularities. It is also demonstrated through the comparisons with the results of molecular dynamics for the binary attractive colloids that TMCT improves the critical values of the volume fraction. In addition, a schematic model of three control parameters is investigated analytically. It is thus confirmed that TMCT can describe the glass-glass transition and higher-order singularities even in such a schematic model.

Holistic versus monomeric strategies for hydrological modelling of human-modified hydrosystems

NASA Astrophysics Data System (ADS)

Nalbantis, I.; Efstratiadis, A.; Rozos, E.; Kopsiafti, M.; Koutsoyiannis, D.

2011-03-01

The modelling of human-modified basins that are inadequately measured constitutes a challenge for hydrological science. Often, models for such systems are detailed and hydraulics-based for only one part of the system while for other parts oversimplified models or rough assumptions are used. This is typically a bottom-up approach, which seeks to exploit knowledge of hydrological processes at the micro-scale at some components of the system. Also, it is a monomeric approach in two ways: first, essential interactions among system components may be poorly represented or even omitted; second, differences in the level of detail of process representation can lead to uncontrolled errors. Additionally, the calibration procedure merely accounts for the reproduction of the observed responses using typical fitting criteria. The paper aims to raise some critical issues, regarding the entire modelling approach for such hydrosystems. For this, two alternative modelling strategies are examined that reflect two modelling approaches or philosophies: a dominant bottom-up approach, which is also monomeric and, very often, based on output information, and a top-down and holistic approach based on generalized information. Critical options are examined, which codify the differences between the two strategies: the representation of surface, groundwater and water management processes, the schematization and parameterization concepts and the parameter estimation methodology. The first strategy is based on stand-alone models for surface and groundwater processes and for water management, which are employed sequentially. For each model, a different (detailed or coarse) parameterization is used, which is dictated by the hydrosystem schematization. The second strategy involves model integration for all processes, parsimonious parameterization and hybrid manual-automatic parameter optimization based on multiple objectives. A test case is examined in a hydrosystem in Greece with high complexities, such as extended surface-groundwater interactions, ill-defined boundaries, sinks to the sea and anthropogenic intervention with unmeasured abstractions both from surface water and aquifers. Criteria for comparison are the physical consistency of parameters, the reproduction of runoff hydrographs at multiple sites within the studied basin, the likelihood of uncontrolled model outputs, the required amount of computational effort and the performance within a stochastic simulation setting. Our work allows for investigating the deterioration of model performance in cases where no balanced attention is paid to all components of human-modified hydrosystems and the related information. Also, sources of errors are identified and their combined effect are evaluated.

46 CFR 62.20-1 - Plans for approval.

Code of Federal Regulations, 2013 CFR

2013-10-01

... console, panel, and enclosure layouts. (3) Schematic or logic diagrams including functional relationships... features. (6) A description of built-in test features and diagnostics. (7) Design Verification and Periodic...

46 CFR 62.20-1 - Plans for approval.

Code of Federal Regulations, 2011 CFR

2011-10-01

... console, panel, and enclosure layouts. (3) Schematic or logic diagrams including functional relationships... features. (6) A description of built-in test features and diagnostics. (7) Design Verification and Periodic...

46 CFR 62.20-1 - Plans for approval.

Code of Federal Regulations, 2010 CFR

2010-10-01

... console, panel, and enclosure layouts. (3) Schematic or logic diagrams including functional relationships... features. (6) A description of built-in test features and diagnostics. (7) Design Verification and Periodic...

46 CFR 62.20-1 - Plans for approval.

Code of Federal Regulations, 2012 CFR

2012-10-01

... console, panel, and enclosure layouts. (3) Schematic or logic diagrams including functional relationships... features. (6) A description of built-in test features and diagnostics. (7) Design Verification and Periodic...

46 CFR 62.20-1 - Plans for approval.

Code of Federal Regulations, 2014 CFR

2014-10-01

... console, panel, and enclosure layouts. (3) Schematic or logic diagrams including functional relationships... programmable features. (6) A description of built-in test features and diagnostics. (7) Design Verification and...

Weather satellite picture receiving stations, APT digital scan converter

NASA Technical Reports Server (NTRS)

Vermillion, C. H.; Kamowski, J. C.

1975-01-01

The automatic picture transmission digital scan converter is used at ground stations to convert signals received from scanning radiometers to data compatible with ground equipment designed to receive signals from vidicons aboard operational meteorological satellites. Information necessary to understand the circuit theory, functional operation, general construction and calibration of the converter is provided. Brief and detailed descriptions of each of the individual circuits are included, accompanied by a schematic diagram contained at the end of each circuit description. Listings of integral parts and testing equipment required as well as an overall wiring diagram are included. This unit will enable the user to readily accept and process weather photographs from the operational meteorological satellites.

Development of a method for fabricating metallic matrix composite shapes by a continuous mechanical process

NASA Technical Reports Server (NTRS)

Divecha, A. P.; Karmarkar, S. D.; Pawar, P. G.

1973-01-01

The continuing efforts in upscaling to produce larger diameter Al/B tubes are described. While the basic methodology remains unchanged, the larger volume of acrylic binder material and its removal by dissolution in toluene had to be performed by dynamic scrubbing. Similarly, the boron and MCF continuous length requirements increased when a 6 foot long by 7 inches wide mat was needed. These modifications and associated problems are described fully with schematics. Also included are seven experiments conducted to prepare larger tubes. The thermal profile, drawing speeds, and furnace positions in the draw bench bay are presented along with metallographic evidence of composite cross sections.

Liquid Rocket Propulsion for Atmospheric Flight in the Proposed ARES Mars Scout Mission

NASA Technical Reports Server (NTRS)

Kuhl, Christopher A.; Wright, Henry S.; Hunter, Craig A.; Guernsey, Carl S.; Colozza, Anthony J.

2004-01-01

Flying above the Mars Southern Highlands, an airplane will traverse over the terrain of Mars while conducting unique science measurements of the atmosphere, surface, and interior. This paper describes an overview of the ARES (Aerial Regional-scale Environmental Survey) mission with an emphasis on airplane propulsion needs. The process for selecting a propulsion system for the ARES airplane is also included. Details of the propulsion system, including system schematics, hardware and performance are provided. The airplane has a 6.25 m wingspan with a total mass of 149 kg and is propelled by a bi-propellant liquid rocket system capable of carrying roughly 48 kg of MMH/MON3 propellant.

Integration, design, and construction of a CELSS breadboard facility for bioregenerative life support system research

NASA Technical Reports Server (NTRS)

Prince, R.; Knott, W.; Buchanan, Paul

1987-01-01

Design criteria for the Biomass Production Chamber (BPC), preliminary operating procedures, and requirements for the future development of the Controlled Ecological Life Support System (CELSS) are discussed. CELSS, which uses a bioregenerative system, includes the following three major units: (1) a biomass production component to grow plants under controlled conditions; (2) food processing components to derive maximum edible content from all plant parts; and (3) waste management components to recover and recycle all solids, liquids, and gases necessary to support life. The current status of the CELSS breadboard facility is reviewed; a block diagram of a simplified version of CELSS and schematic diagrams of the BPS are included.

Construction and testing of a Scanning Laser Radar (SLR), phase 2

NASA Technical Reports Server (NTRS)

Flom, T.; Coombes, H. D.

1971-01-01

The scanning laser radar overall system is described. Block diagrams and photographs of the hardware are included with the system description. Detailed descriptions of all the subsystems that make up the scanning laser radar system are included. Block diagrams, photographs, and detailed optical and electronic schematics are used to help describe such subsystem hardware as the laser, beam steerer, receiver optics and detector, control and processing electronics, visual data displays, and the equipment used on the target. Tests were performed on the scanning laser radar to determine its acquisition and tracking performance and to determine its range and angle accuracies while tracking a moving target. The tests and test results are described.

Determining Level of Service for Multilane Median Opening Zone

NASA Astrophysics Data System (ADS)

Ali, Paydar; Johnnie, Ben-Edigbe

2017-08-01

The road system is a capital-intensive investment, requiring thorough schematic framework and funding. Roads are built to provide an intrinsic quality of service which satisfies the road users. Roads that provide good services are expected to deliver operational performance that is consistent with their design specifications. Level of service and cumulative percentile speed distribution methods have been used in previous studies to estimate the quality of multilane highway service. Whilst the level of service approach relies on speed/flow curve, the cumulative percentile speed distribution is based solely speed. These estimation methods were used in studies carried out in Johor Malaysia. The aim of the studies is to ascertain the extent of speed reduction caused by midblock U-turn facilities as well as verify which estimation method is more reliable. At selected sites, road segments for both directional flows were divided into free-flow and midblock zones. Traffic volume, speed and vehicle type data for each zone were collected continuously for six weeks. Both estimation methods confirmed that speed reduction would be caused by midblock u-turn facilities. However level of service methods suggested that the quality of service would improve from level F to E or D at midblock zone in spite of speed reduction. Level of service was responding to traffic volume reduction at midblock u-turn facility not travel speed reduction. The studies concluded that since level of service was more responsive to traffic volume reduction than travel speed, it cannot be solely relied upon when assessing the quality of multilane highway service.

Experimental Investigation of a Model of a Two-Stage Turboblower

NASA Technical Reports Server (NTRS)

Dovjik, s.; Polikovsky, W.

1943-01-01

In the present paper an investigation is made of two stages of a multistage turboblower having a vaneless diffuser behind the impeller and guide vanes at the inlet to the nest stage. The method employed was that of investigating the performance of the successive elements of the blower (the impeller, vaneless diffuser, ets.) whereby the kinematics of the flow through the blower could be followed and the pressure at the different points computed. The character of the flow and the physical significance of the loss coefficients could thereby be determined so as to secure the best agreement of the computed with the actual performance of the blower. Since the tests were carried out for various delivery volumes, the dependence of the coefficients on a number of factors (angle of attack, velocities, etc.) could be obtained. The distribution of the losses that occur during the transformation of dynamic pressure at the impeller exit into static pressure could be found and likewise the range within which the friction coefficient varies in the vaneless diffuser. With the aid of factors having a certain physical significance, the centrifugal blower could be computed on the basis of a more or less schematical consideration of the phenomena occuring during the air flow through it, and the use of arbitrary factors and recourse to the geometrical similtude law thus avoided. The present investigation largely summarizes all the previous work af the CHI Blower Section on the different elements of a centrifugal blower. Some considerations on the analysis of model test data for application to full-scale are presented in the appendix.

Impact of methane flow through deformable lake sediments on atmospheric release

NASA Astrophysics Data System (ADS)

Scandella, B.; Juanes, R.

2010-12-01

Methane is a potent greenhouse gas that is generated geothermally and biologically in lake and ocean sediments. Free gas bubbles may escape oxidative traps and contribute more to the atmospheric source than dissolved methane, but the details of the methane release depend on the interactions between the multiple fluid phases and the deformable porous medium. We present a model and supporting laboratory experiments of methane release through “breathing” dynamic flow conduits that open in response to drops in the hydrostatic load on lake sediments, which has been validated against a high-resolution record of free gas flux and hydrostatic pressure in Upper Mystic Lake, MA. In contrast to previous linear elastic fracture mechanics analysis of gassy sediments, the evolution of gas transport in a deformable compliant sediment is presented within the framework of multiphase poroplasticity. Experiments address how strongly the mode and rate of gas flow, captured by our model, impacts the size of bubbles released into the water column. A bubble's size in turn determines how efficiently it transports methane to the atmosphere, and integrating this effect will be critical to improving estimates of the atmospheric methane source from lakes. Cross-sectional schematic of lake sediments showing two venting sites: one open at left and one closed at right. The vertical release of gas bubbles (red) at the open venting site creates a local pressure drop, which drives both bubble formation from the methane-rich pore water (higher concentrations shaded darker red) and lateral advection of dissolved methane (purple arrows). Even as bubbles in the open site escape, those at the closed site remain trapped.

Central Control Room in the Engine Research Building

NASA Image and Video Library

1968-11-21

Operators in the Engine Research Building’s Central Control Room at the National Aeronautics and Space Administration (NASA) Lewis Research Center. The massive 4.25-acre Engine Research Building contains dozens of test cells, test stands, and altitude chambers. A powerful a collection of compressors and exhausters located in the central portion of the basement provides process air and exhaust for these test areas. This system is connected to similar process air systems in the laboratory’s other large test facilities. The Central Control Room coordinates this activity and communicates with the local utilities. The panels on the wall contain schematics with indicator lights and instrumentation for the atmospheric exhaust, altitude exhaust, refrigerated air, and process air systems. The process air equipment included twelve exhausters, four compressors, refrigeration system, cooling water, and an exhaust system. The operators in the control room kept in contact with engineers running the process air system and those conducting the tests in the test cells. The operators also coordinated with the local power companies to make sure enough electricity was available to operate the powerful compressors and exhausters.

Evaluation of Precast Portland Cement Concrete Panels for Airfield Pavement Repairs

DTIC Science & Technology

2015-05-01

3 1.3 Research approach ...Figure 1.1. Research approach schematic. ................................................................................................ 4 Figure 2.1...220 Figure D.10. Locations of HWD tests pre-repair and posttest

The Altitude Laboratory for the Test of Aircraft Engines

NASA Technical Reports Server (NTRS)

Dickinson, H C; Boutell, H G

1920-01-01

Report presents descriptions, schematics, and photographs of the altitude laboratory for the testing of aircraft engines constructed at the Bureau of Standards for the National Advisory Committee for Aeronautics.

Facial affect processing in social anxiety disorder with early onset: evidence of an intensity amplification bias.

PubMed

Schwab, Daniela; Schienle, Anne

2018-06-01

The present event-related potential (ERP) study investigated for the first time whether children with early-onset social anxiety disorder (SAD) process affective facial expressions of varying intensities differently than non-anxious controls. Participants were 15 SAD patients and 15 non-anxious controls (mean age of 9 years). They were presented with schematic faces displaying anger and happiness at four intensity levels (25%, 50%, 75%, and 100%), as well as with neutral faces. ERPs in early and later time windows (P100, N170, late positivity [LP]), as well as affective ratings (valence and arousal) for the faces, were recorded. SAD patients rated the faces as generally more arousing, regardless of the type of emotion and intensity. Moreover, they displayed enhanced right-parietal LP (350-650 ms). Both arousal ratings and LP reflect stimulus intensity. Therefore, this study provides first evidence of an intensity amplification bias in pediatric SAD during facial affect processing.

ERP correlates of attentional processing in spider fear: evidence of threat-specific hypervigilance.

PubMed

Venetacci, Rebecca; Johnstone, Amber; Kirkby, Kenneth C; Matthews, Allison

2018-05-01

Attentional bias towards threat can be demonstrated by enhanced processing of threat-related targets and/or greater interference when threat-related distractors are present. These effects are argued to reflect processing within the orienting and executive control networks of the brain respectively. This study investigated behavioural (RT) and electrophysiological correlates of early selective attention and top-down attentional control among females with high (n = 16) or low (n = 16) spider fear (Mean age = 22 years). Participants completed a novel flanker go/nogo task in which a central schematic flower or spider stimulus was flanked by either congruent or incongruent distractors. Participants responded to green stimuli (go trials) and withheld response to yellow stimuli (nogo trials). High fear participants demonstrated significantly shorter reaction times and greater P1 amplitude to spider targets, suggesting specific hypervigilance towards threat-relevant stimuli. In contrast to predictions, there was little evidence for behavioural interference effects or differences in N2 amplitude when distractor stimuli were threat-relevant.

Research and development for Onboard Navigation (ONAV) ground based expert/trainer system: ONAV entry expert system code

NASA Technical Reports Server (NTRS)

Bochsler, Daniel C.

1988-01-01

A complete listing is given of the expert system rules for the Entry phase of the Onboard Navigation (ONAV) Ground Based Expert Trainer System for aircraft/space shuttle navigation. These source listings appear in the same format as utilized and required by the C Language Integrated Production System (CLIPS) expert system shell which is the basis for the ONAV entry system. A schematic overview is given of how the rules are organized. These groups result from a partitioning of the rules according to the overall function which a given set of rules performs. This partitioning was established and maintained according to that established in the knowledge specification document. In addition, four other groups of rules are specified. The four groups (control flow, operator inputs, output management, and data tables) perform functions that affect all the other functional rule groups. As the name implies, control flow ensures that the rule groups are executed in the order required for proper operation; operator input rules control the introduction into the CLIPS fact base of various kinds of data required by the expert system; output management rules control the updating of the ONAV expert system user display screen during execution of the system; and data tables are static information utilized by many different rule sets gathered in one convenient place.

Continuous Liquid-Sample Introduction for Bunsen Burner Atomic Emission Spectrometry.

ERIC Educational Resources Information Center

Smith, Gregory D.; And Others

1995-01-01

Describes a laboratory-constructed atomic emission spectrometer with modular instrumentation components and a simple Bunsen burner atomizer with continuous sample introduction. A schematic diagram and sample data are provided. (DDR)

Ice pack heat sink subsystem - phase 1, volume 2

NASA Technical Reports Server (NTRS)

Roebelen, G. J., Jr.

1973-01-01

The design, development, and test of a functional laboratory model ice pack heat sink subsystem are discussed. Operating instructions to include mechanical and electrical schematics, maintenance instructions, and equipment specifications are presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fried, Jack

The TSPM receives and processes ASIC signals and transmits processed data over to the PC using an Ethernet cable. The data is given a location and a time stamp. This is the heart of the device as it gathers and stamps the timing and location of events on each of the ASICs. The five files for the TSPM are needed to manufacture Pet scanners that are based on the RatCAP (Rat Conscious Animal PET). They include a TSPM schematic, a raw data file to build the RatCAP TSPM, an output file that along with the assay file is used bymore » an assembly house to build the RatCAP TSPM, an assay file that provides the part list and XY location for the components that go on the RatCAP TSPM, firmware that includes the source code to program the FPGA, and a realized program on the TSPM based on the firmware.« less

Low pressure hand made PVD system for high crystalline metal thin film preparation in micro-nanometer scale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosikhin, Ahmad, E-mail: a.rosikhin86@yahoo.co.id; Hidayat, Aulia Fikri; Marimpul, Rinaldo

High crystalline metal thin film preparation in application both for catalyst substrate or electrode in any electronic devices always to be considered in material functional material research and development. As a substrate catalyst, this metal take a role as guidance for material growth in order to resulted in proper surface structure although at the end it will be removed via etching process. Meanwhile as electrodes, it will dragging charges to be collected inside. This brief discussion will elaborate general fundamental principle of physical vapor deposition (PVD) system for metal thin film preparation in micro-nanometer scale. The influence of thermodynamic parametersmore » and metal characteristic such as melting point and particle size will be elucidated. Physical description of deposition process in the chamber can be simplified by schematic evaporation phenomena which is supported by experimental measurement such as SEM and XRD.« less

Automated Monitoring with a BSP Fault-Detection Test

NASA Technical Reports Server (NTRS)

Bickford, Randall L.; Herzog, James P.

2003-01-01

The figure schematically illustrates a method and procedure for automated monitoring of an asset, as well as a hardware- and-software system that implements the method and procedure. As used here, asset could signify an industrial process, power plant, medical instrument, aircraft, or any of a variety of other systems that generate electronic signals (e.g., sensor outputs). In automated monitoring, the signals are digitized and then processed in order to detect faults and otherwise monitor operational status and integrity of the monitored asset. The major distinguishing feature of the present method is that the fault-detection function is implemented by use of a Bayesian sequential probability (BSP) technique. This technique is superior to other techniques for automated monitoring because it affords sensitivity, not only to disturbances in the mean values, but also to very subtle changes in the statistical characteristics (variance, skewness, and bias) of the monitored signals.

Assertiveness process of Iranian nurse leaders: a grounded theory study.

PubMed

Mahmoudirad, Gholamhossein; Ahmadi, Fazlollah; Vanaki, Zohreh; Hajizadeh, Ebrahim

2009-06-01

The purpose of this study was to explore the assertiveness process in Iranian nursing leaders. A qualitative design based on the grounded theory approach was used to collect and analyze the assertiveness experiences of 12 nurse managers working in four hospitals in Iran. Purposeful and theoretical sampling methods were employed for the data collection and selection of the participants, and semistructured interviews were held. During the data analysis, 17 categories emerged and these were categorized into three themes: "task generation", "assertiveness behavior", and "executive agents". From the participants' experiences, assertiveness theory emerged as being fundamental to the development of a schematic model describing nursing leadership behaviors. From another aspect, religious beliefs also played a fundamental role in Iranian nursing leadership assertiveness. It was concluded that bringing a change in the current support from top managers and improving self-learning are required in order to enhance the assertiveness of the nursing leaders in Iran.

Schematic drawings of facial expressions for emotion recognition and interpretation by preschool-aged children.

PubMed

MacDonald, P M; Kirkpatrick, S W; Sullivan, L A

1996-11-01

Schematic drawings of facial expressions were evaluated as a possible assessment tool for research on emotion recognition and interpretation involving young children. A subset of Ekman and Friesen's (1976) Pictures of Facial Affect was used as the standard for comparison. Preschool children (N = 138) were shown drawing and photographs in two context conditions for six emotions (anger, disgust, fear, happiness, sadness, and surprise). The overall correlation between accuracy for the photographs and drawings was .677. A significant difference was found for the stimulus condition (photographs vs. drawings) but not for the administration condition (label-based vs. context-based). Children were significantly more accurate in interpreting drawings than photographs and tended to be more accurate in identifying facial expressions in the label-based administration condition for both photographs and drawings than in the context-based administration condition.

Schematic diagram of light path in Wide Field Planetary Camera 2

NASA Image and Video Library

1993-03-15

S93-33258 (15 Mar 1993) --- An optical schematic diagram of one of the four channels of the Wide Field\\Planetary Camera-2 (WF\\PC-2) shows the path taken by beams from the Hubble Space Telescope (HST) before an image is formed at the camera's charge-coupled devices. A team of NASA astronauts will pay a visit to the HST later this year, carrying with them the new WF/PC-2 to replace the one currently on the HST. The Jet Propulsion Laboratory in Pasadena, California has been working on the replacement system for several months. See NASA photo S93-33257 for a close-up view of tiny articulating mirrors designed to realign incoming light in order to make certain the beams fall precisely in the middle of the secondary mirrors.

The Importance of Being Interpreted: Grounded Words and Children’s Relational Reasoning

PubMed Central

Son, Ji Y.; Smith, Linda B.; Goldstone, Robert L.; Leslie, Michelle

2012-01-01

Although young children typically have trouble reasoning relationally, they are aided by the presence of “relational” words (e.g., Gentner and Rattermann, 1991). They also reason well about commonly experienced event structures (e.g., Fivush, 1984). To explore what makes a word “relational” and therefore helpful in relational reasoning, we hypothesized that these words activate well-understood event structures. Furthermore, the activated schema must be open enough (without too much specificity) that it can be applied analogically to novel problems. Four experiments examine this hypothesis by exploring: how training with a label influence the schematic interpretation of a scene, what kinds of scenes are conducive to schematic interpretation, and whether children must figure out the interpretation themselves to benefit from the act of interpreting a scene as an event. Experiment 1 shows the superiority of schema-evoking words over words that do not connect to schematized experiences. Experiments 2 and 3 further reveal that these words must be applied to perceptual instances that require cognitive effort to connect to a label rather than unrelated or concretely related instances in order to draw attention to relational structure. Experiment 4 provides evidence that even when children do not work out an interpretation for themselves, just the act of interpreting an ambiguous scene is potent for relational generalization. The present results suggest that relational words (and in particular their meanings) are created from the act of interpreting a perceptual situation in the context of a word. PMID:22408628

The attention schema theory: a mechanistic account of subjective awareness

PubMed Central

Graziano, Michael S. A.; Webb, Taylor W.

2015-01-01

We recently proposed the attention schema theory, a novel way to explain the brain basis of subjective awareness in a mechanistic and scientifically testable manner. The theory begins with attention, the process by which signals compete for the brain’s limited computing resources. This internal signal competition is partly under a bottom–up influence and partly under top–down control. We propose that the top–down control of attention is improved when the brain has access to a simplified model of attention itself. The brain therefore constructs a schematic model of the process of attention, the ‘attention schema,’ in much the same way that it constructs a schematic model of the body, the ‘body schema.’ The content of this internal model leads a brain to conclude that it has a subjective experience. One advantage of this theory is that it explains how awareness and attention can sometimes become dissociated; the brain’s internal models are never perfect, and sometimes a model becomes dissociated from the object being modeled. A second advantage of this theory is that it explains how we can be aware of both internal and external events. The brain can apply attention to many types of information including external sensory information and internal information about emotions and cognitive states. If awareness is a model of attention, then this model should pertain to the same domains of information to which attention pertains. A third advantage of this theory is that it provides testable predictions. If awareness is the internal model of attention, used to help control attention, then without awareness, attention should still be possible but should suffer deficits in control. In this article, we review the existing literature on the relationship between attention and awareness, and suggest that at least some of the predictions of the theory are borne out by the evidence. PMID:25954242

Sensory, Cognitive, and Sensorimotor Learning Effects in Recognition Memory for Music.

PubMed

Mathias, Brian; Tillmann, Barbara; Palmer, Caroline

2016-08-01

Recent research suggests that perception and action are strongly interrelated and that motor experience may aid memory recognition. We investigated the role of motor experience in auditory memory recognition processes by musicians using behavioral, ERP, and neural source current density measures. Skilled pianists learned one set of novel melodies by producing them and another set by perception only. Pianists then completed an auditory memory recognition test during which the previously learned melodies were presented with or without an out-of-key pitch alteration while the EEG was recorded. Pianists indicated whether each melody was altered from or identical to one of the original melodies. Altered pitches elicited a larger N2 ERP component than original pitches, and pitches within previously produced melodies elicited a larger N2 than pitches in previously perceived melodies. Cortical motor planning regions were more strongly activated within the time frame of the N2 following altered pitches in previously produced melodies compared with previously perceived melodies, and larger N2 amplitudes were associated with greater detection accuracy following production learning than perception learning. Early sensory (N1) and later cognitive (P3a) components elicited by pitch alterations correlated with predictions of sensory echoic and schematic tonality models, respectively, but only for the perception learning condition, suggesting that production experience alters the extent to which performers rely on sensory and tonal recognition cues. These findings provide evidence for distinct time courses of sensory, schematic, and motoric influences within the same recognition task and suggest that learned auditory-motor associations influence responses to out-of-key pitches.

Signals from the Cosmos.

ERIC Educational Resources Information Center

Lichtman, Jeffrey M.

1991-01-01

Introduces the basics of radio astronomy and describes how to assemble several simple systems for receiving radio signals from the cosmos. Includes schematics, parts lists, working drawings, and contact information for radio astronomy suppliers. (11 references) (Author/JJK)

How Do We Recognize a Fault When We See One?

ERIC Educational Resources Information Center

Rogers, Ralph David

1991-01-01

Describes activities to help students see discontinuities as faults. Students collect data, manipulate data, and use the data to formulate explanations. Schematic diagrams help students with the conceptual component of thinking. (PR)

Automated analysis of blood pressure measurements (Korotkov sound)

NASA Technical Reports Server (NTRS)

Golden, D. P.; Hoffler, G. W.; Wolthuis, R. A.

1972-01-01

Automatic system for noninvasive measurements of arterial blood pressure is described. System uses Korotkov sound processor logic ratios to identify Korotkov sounds. Schematic diagram of system is provided to show components and method of operation.

Installation package for a solar heating system

NASA Technical Reports Server (NTRS)

1978-01-01

Installation information is given for a solar heating system installed in Concho Indian School at El Reno, Oklahoma. This package includes a system Operation and Maintenance Manual, hardware brochures, schematics, system operating modes and drawings.

The CICT Earth Science Systems Analysis Model

NASA Technical Reports Server (NTRS)

Pell, Barney; Coughlan, Joe; Biegel, Bryan; Stevens, Ken; Hansson, Othar; Hayes, Jordan

2004-01-01

Contents include the following: Computing Information and Communications Technology (CICT) Systems Analysis. Our modeling approach: a 3-part schematic investment model of technology change, impact assessment and prioritization. A whirlwind tour of our model. Lessons learned.

How Things Work: Metal Locators and Related Devices.

ERIC Educational Resources Information Center

Crane, H. Richard, Ed.

1984-01-01

Describes a simple form of metal detector, discussing the principles of signal generation, and the detection and discrimination of induced eddy current signals from the located objects. Includes a rough schematic of the detector. (JM)

Multisensor Instrument for Real-Time Biological Monitoring

NASA Technical Reports Server (NTRS)

Zhang, Sean (Zhanxiang); Xu, Guoda; Qiu, Wei; Lin, Freddie

2004-01-01

The figure schematically depicts an instrumentation system, called a fiber optic-based integration system (FOBIS), that is undergoing development to enable real-time monitoring of fluid cell cultures, bioprocess flows, and the like. The FOBIS design combines a micro flow cytometer (MFC), a microphotometer (MP), and a fluorescence-spectrum- or binding-force-measuring micro-sensor (MS) in a single instrument that is capable of measuring multiple biological parameters simultaneously or sequentially. The fiber-optic-based integration system is so named because the MFC, the MP, and the MS are integrated into a single optical system that is coupled to light sources and photometric equipment via optical fibers. The optical coupling components also include a wavelength-division multiplexer and diffractive optical elements. The FOBIS includes a laserdiode- and fiber-optic-based optical trapping subsystem (optical tweezers ) with microphotometric and micro-sensing capabilities for noninvasive confinement and optical measurement of relevant parameters of a single cell or other particle. Some of the measurement techniques implemented together by the FOBIS have long been used separately to obtain basic understanding of the optical properties of individual cells and other organisms, the optical properties of populations of organisms, and the interrelationships among these properties, physiology of the organisms, and physical processes that govern the media that surround the organisms. For example, flow cytometry yields information on numerical concentrations, cross-sectional areas, and types of cells or other particles. Micro-sensing can be used to measure pH and concentrations of oxygen, carbon dioxide, glucose, metabolites, calcium, and antigens in a cell-culture fluid, thereby providing feedback that can be helpful in improving control over a bioprocess. Microphotometry (including measurements of scattering and fluorescence) can yield further information about optically trapped individual particles. In addition to the multifunctionality not previously available in a single biological monitoring system, the FOBIS offers advantages of low mass, sensitivity, accuracy, portability, low cost, compactness (the overall dimensions of the fully developed FOBIS sensor head are expected to be less than 1 by 1 by 2 cm), and immunity to electromagnetic interference at suboptical frequencies. FOBIS could be useful in a variety of laboratory and field settings in such diverse endeavors as medical, veterinary, and general biological research; medical and veterinary diagnosis monitoring of industrial bioprocesses; and analysis of biological contaminants in air, water, and food.

Saturation-dependent solute dispersivity in porous media: Pore-scale processes

NASA Astrophysics Data System (ADS)

Raoof, A.; Hassanizadeh, S. M.

2013-04-01

It is known that in variably saturated porous media, dispersion coefficient depends on Darcy velocity and water saturation. In one-dimensional flow, it is commonly assumed that the dispersion coefficient is a linear function of velocity. The coefficient of proportionality, called the dispersivity, is considered to depend on saturation. However, there is not much known about its dependence on saturation. In this study, we investigate, using a pore network model, how the longitudinal dispersivity varies nonlinearly with saturation. We schematize the porous medium as a network of pore bodies and pore throats with finite volumes. The pore space is modeled using the multidirectional pore-network concept, which allows for a distribution of pore coordination numbers. This topological property together with the distribution of pore sizes are used to mimic the microstructure of real porous media. The dispersivity is calculated by solving the mass balance equations for solute concentration in all network elements and averaging the concentrations over a large number of pores. We have introduced a new formulation of solute transport within pore space, where we account for different compartments of residual water within drained pores. This formulation makes it possible to capture the effect of limited mixing due to partial filling of the pores under variably saturated conditions. We found that dispersivity increases with the decrease in saturation, it reaches a maximum value, and then decreases with further decrease in saturation. To show the capability of our formulation to properly capture the effect of saturation on solute dispersion, we applied it to model the results of a reported experimental study.

The Life Cycle Application of Intelligent Software Modeling for the First Materials Science Research Rack

NASA Technical Reports Server (NTRS)

Rice, Amanda; Parris, Frank; Nerren, Philip

2000-01-01

Marshall Space Flight Center (MSFC) has been funding development of intelligent software models to benefit payload ground operations for nearly a decade. Experience gained from simulator development and real-time monitoring and control is being applied to engineering design, testing, and operation of the First Material Science Research Rack (MSRR-1). MSRR-1 is the first rack in a suite of three racks comprising the Materials Science Research Facility (MSRF) which will operate on the International Space Station (ISS). The MSRF will accommodate advanced microgravity investigations in areas such as the fields of solidification of metals and alloys, thermo-physical properties of polymers, crystal growth studies of semiconductor materials, and research in ceramics and glasses. The MSRR-1 is a joint venture between NASA and the European Space Agency (ESA) to study the behavior of different materials during high temperature processing in a low gravity environment. The planned MSRR-1 mission duration is five (5) years on-orbit and the total design life is ten (IO) years. The MSRR-1 launch is scheduled on the third Utilization Flight (UF-3) to ISS, currently in February of 2003). The objective of MSRR-1 is to provide an early capability on the ISS to conduct material science, materials technology, and space product research investigations in microgravity. It will provide a modular, multi-user facility for microgravity research in materials crystal growth and solidification. An intelligent software model of MSRR-1 is under development and will serve multiple purposes to support the engineering analysis, testing, training, and operational phases of the MSRR-1 life cycle development. The G2 real-time expert system software environment developed by Gensym Corporation was selected as the intelligent system shell for this development work based on past experience gained and the effectiveness of the programming environment. Our approach of multi- uses of the simulation model and its intuitive graphics capabilities is providing a concurrent engineering environment for rapid prototyping and development. Operational schematics of the MSRR-1 electrical, thermal control, vacuum access, and gas supply systems, and furnace inserts are represented graphically in the environment. Logic to represent first order engineering calculations is coded into the knowledge base to simulate the operational behavior of the MSRR-1 systems. An example of engineering data provided includes electrical currents, voltages, operational power, temperatures, thermal fluid flow rates. pressures, and component status indications. These type of data are calculated and displayed at appropriate instrumentation points, and the schematics are animated to reflect the simulated operational status of the MSRR-1. The software control functions are also simulated to represent appropriate operational behavior based on automated control and response to commands received by the crew or ground controllers. The first benefit of this simulation environment is being realized in the high fidelity engineering analysis results from the electrical power system G2 model. Secondly, the MSRR-1 simulation model will be embedded with a hardware mock-up of the MSRR-1 to provide crew training on MSRR-1 integrated payload operations. G2 gateway code will output the simulated instrumentation values, termed as telemetry, in a flight-like data stream so that the crew has realistic and accurate simulated MSRR-1 data on the flight displays which will be designed for crew use. The simulation will also respond appropriately to crew or ground initiated commands, which will be part of normal facility operations. A third use of the G2 model is being planned; the MSRR-1 simulation will be integrated with additional software code as part of the test configuration of the primary onboard computer, or Master Controller, for MSRR-1. We will take advantage of the G2 capability to simulate the flight like data stream to test flight software responses and behavior. A fourth use of the G2 model will be to train the Ground Support Personnel that will monitor the MSRR-1 systems and payloads while they are operating aboard the ISS. The intuitive, schematic based environment will provide an excellent foundation for personnel to understand the integrated configuration and operation of the MSRR-1, and the anticipated telemetry feedback based on operational modes of the equipment. Expert monitoring features will be enhanced to provide a smart monitoring environment for the operators. These features include: (1) Animated, intuitive schematic-based displays which reflect telemetry values, (1) Real-time plotting of simulated or incoming sensor values, (3) High/Low exception monitoring for analog data, (4) Expected state monitoring for discrete data, (5) Data trending, (6) Automated malfunction procedure execution to diagnose problems, (7) Look ahead capability to planned MSRR-1 activities in the onboard timeline. And finally, the logic to calculate telemetry values will be deactivated, and the same environment will interface to the incoming data for the real-time telemetry stream to schematically represent the onboard hardware configuration. G2 will be the foundation for the real-time monitoring and control environment. In summary, our MSRR-1 simulation model spans many elements of the life cycle development of this project: Engineering Analysis, Test and Checkout, Training of Crew and Ground Personnel, and Real-time monitoring and control. By utilizing the unique features afforded by an expert system development environment, we have been able to synergize a powerful tool capable of addressing our project needs at every phase of project development.

Rumination, experiential avoidance, and dysfunctional thinking in eating disorders

PubMed Central

Rawal, Adhip; Park, Rebecca J.; Williams, J. Mark G.

2010-01-01

The majority of research in eating disorders (ED) has investigated the content of disorder-specific thoughts, while few studies have addressed underlying cognitive-affective processes. A better understanding of processes underpinning ED may have important implications for treatment development. Two studies were conducted that investigated levels of rumination, beliefs about rumination, experiential avoidance, and aspects of schematic thinking in individuals with eating pathology. The latter was assessed with a newly designed ED-Sentence Completion Task (ED-SCT). Study 1 (N = 177) examined relations between ED psychopathology and these variables in a student population. Extending this, Study 2 (N = 26) assessed differences between patients with anorexia nervosa and healthy control participants. The results showed that ED psychopathology was related to disorder-specific cognitions, experiential avoidance as well as ruminative brooding but not reflection. A follow-up of anorexia nervosa patients indicated that changes in ED psychopathology were associated with changes in dysfunctional attitudes and maladaptive cognitive-affective processes. These findings highlight cognitive processes that may play an important role in the maintenance of eating pathology. PMID:20598670

Independent Orbiter Assessment (IOA): Analysis of the pyrotechnics subsystem

NASA Technical Reports Server (NTRS)

Robinson, W. W.

1988-01-01

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Orbiter Pyrotechnics hardware. The IOA analysis process utilized available pyrotechnics hardware drawings and schematics for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode.

Investigation of the Static and Dynamic Characteristics for a Wafer-Fused C-band VCSEL in the Mode of the Optical-Electric Converter

NASA Astrophysics Data System (ADS)

Belkin, M. E.

2018-01-01

The results of an experimental study for a long wavelength vertical cavity surface-emitting laser of a wafer-fused construction as an effective resonant cavity enhanced photodetector of analog optical signals are described. The device is of interest for a number of promising microwave photonics applications and for creation of a low-cost photoreceiver in a high-speed fiber optics telecommunication system with dense wavelength division multiplexing. The schematic of the testbed, the original technique allowing to calculate the passband of the built-in optical cavity, and the results of measuring dark current, current responsivity, amplitude- and phase-frequency characteristics during the process of photo-detection are demonstrated.

DC motor proportional control system for orthotic devices

NASA Technical Reports Server (NTRS)

Blaise, H. T.; Allen, J. R.

1972-01-01

Multi-channel proportional control system for operation of dc motors for use with externally-powered orthotic arm braces is described. Components of circuitry and principles of operation are described. Schematic diagram of control circuit is provided.

30 CFR 250.1617 - Application for permit to drill.

Code of Federal Regulations, 2010 CFR

2010-07-01

... BOP equipment, (ii) A schematic drawing of the diverter system to be used (plan and elevation views... survey program for directionally drilled wells; (9) An H2S Contingency Plan, if applicable, and if not...

Through the eyes of the Informationist: Identifying information needs of the Breast Imaging Service at a tertiary medical center specializing in cancer.

PubMed

DeRosa, Antonio P; Gibson, Donna S; Morris, Elizabeth A

2017-09-01

The information services offered by Embedded Librarians over the years have led to the more modern-and domain knowledge-specific-role of the Informationist. A 10-point questionnaire was developed and used to interview 12 attending physicians and three fellows chosen at random. The participants are either on the research track (n = 3) or the clinical track (n = 9). A two-part schematic was also created to capture more detailed feedback about the information needs and information-seeking behavior of clinicians regarding patient care (clinical) and research activities. Bibliographic management tool use and time-related factors were also captured in the interviews and written schematics. The role of the Informationist is an emerging, yet valuable one to assigned clinical groups. Clinician's knowledge-base, current awareness, productivity, and evidence-based care can be improved by use of Informationist services.

Schematic representation of residue-based protein context-dependent data: an application to transmembrane proteins.

PubMed

Campagne, F; Weinstein, H

1999-01-01

An algorithmic method for drawing residue-based schematic diagrams of proteins on a 2D page is presented and illustrated. The method allows the creation of rendering engines dedicated to a given family of sequences, or fold. The initial implementation provides an engine that can produce a 2D diagram representing secondary structure for any transmembrane protein sequence. We present the details of the strategy for automating the drawing of these diagrams. The most important part of this strategy is the development of an algorithm for laying out residues of a loop that connects to arbitrary points of a 2D plane. As implemented, this algorithm is suitable for real-time modification of the loop layout. This work is of interest for the representation and analysis of data from (1) protein databases, (2) mutagenesis results, or (3) various kinds of protein context-dependent annotations or data.

A scheme of pedagogical problems solving in kinematic to observe toulmin argumentation feasibility

NASA Astrophysics Data System (ADS)

Manurung, Sondang R.; Rustaman, Nuryani Y.; Siregar, Nelson

2013-09-01

The purpose of this study is to determine the students' ability to map out the problem solving. This paper would show a schematic template map used to analyze the students' tasks in performing problem solving pedagogically. Scheme of problem solving map of student was undertaken based on Toulmin Argumentation Pattern (TAP) argumentative discourse. The samples of this study were three work-sheets of physics education students who represented the upper, middle and lower levels of class in one LPTK in Medan. The instrument of this study was an essay test in kinematics topic. The data analyses were performed with schematic template map in order to know the students' ability in mapping the problem solving. The results showed that the student in the Upper level of class followed the appropriate direction pattern, while two others students could not followed the pattern exactly.

The Interactive Origin and the Aesthetic Modelling of Image-Schemas and Primary Metaphors.

PubMed

Martínez, Isabel C; Español, Silvia A; Pérez, Diana I

2018-06-02

According to the theory of conceptual metaphor, image-schemas and primary metaphors are preconceptual structures configured in human cognition, based on sensory-motor environmental activity. Focusing on the way both non-conceptual structures are embedded in early social interaction, we provide empirical evidence for the interactive and intersubjective ontogenesis of image-schemas and primary metaphors. We present the results of a multimodal image-schematic microanalysis of three interactive infant-directed performances (the composition of movement, touch, speech, and vocalization that adults produce for-and-with the infants). The microanalyses show that adults aesthetically highlight the image-schematic structures embedded in the multimodal composition of the performance, and that primary metaphors are also lived as embedded in these inter-enactive experiences. The findings allow corroborating that the psychological domains of cognition and affection are not in rivalry or conflict but rather intertwined in meaningful experiences.

Program Helps In Analysis Of Failures

NASA Technical Reports Server (NTRS)

Stevenson, R. W.; Austin, M. E.; Miller, J. G.

1993-01-01

Failure Environment Analysis Tool (FEAT) computer program developed to enable people to see and better understand effects of failures in system. User selects failures from either engineering schematic diagrams or digraph-model graphics, and effects or potential causes of failures highlighted in color on same schematic-diagram or digraph representation. Uses digraph models to answer two questions: What will happen to system if set of failure events occurs? and What are possible causes of set of selected failures? Helps design reviewers understand exactly what redundancies built into system and where there is need to protect weak parts of system or remove them by redesign. Program also useful in operations, where it helps identify causes of failure after they occur. FEAT reduces costs of evaluation of designs, training, and learning how failures propagate through system. Written using Macintosh Programmers Workshop C v3.1. Can be linked with CLIPS 5.0 (MSC-21927, available from COSMIC).

Robust position estimation of a mobile vehicle

NASA Astrophysics Data System (ADS)

Conan, Vania; Boulanger, Pierre; Elgazzar, Shadia

1994-11-01

The ability to estimate the position of a mobile vehicle is a key task for navigation over large distances in complex indoor environments such as nuclear power plants. Schematics of the plants are available, but they are incomplete, as real settings contain many objects, such as pipes, cables or furniture, that mask part of the model. The position estimation method described in this paper matches 3-D data with a simple schematic of a plant. It is basically independent of odometry information and viewpoint, robust to noisy data and spurious points and largely insensitive to occlusions. The method is based on a hypothesis/verification paradigm and its complexity is polynomial; it runs in (Omicron) (m4n4), where m represents the number of model patches and n the number of scene patches. Heuristics are presented to speed up the algorithm. Results on real 3-D data show good behavior even when the scene is very occluded.

Manned Mars Explorer project: Guidelines for a manned mission to the vicinity of Mars using Phobos as a staging outpost; schematic vehicle designs considering chemical and nuclear electric propulsion

NASA Technical Reports Server (NTRS)

Nolan, Sean; Neubek, Deb; Baxmann, C. J.

1988-01-01

The Manned Mars Explorer (MME) project responds to the fundamental problems of sending human beings to Mars in a mission scenario and schematic vehicle designs. The mission scenario targets an opposition class Venus inbound swingby for its trajectory with concentration on Phobos and/or Deimos as a staging base for initial and future Mars vicinity operations. Optional vehicles are presented as a comparison using nuclear electric power/propulsion technology. A Manned Planetary Vehicle and Crew Command Vehicle are used to accomplish the targeted mission. The Manned Planetary Vehicle utilizes the mature technology of chemical propulsion combined with an advanced aerobrake, tether and pressurized environment system. The Crew Command Vehicle is the workhorse of the mission performing many different functions including a manned Mars landing, and Phobos rendezvous.

Ultra-Pure Water and Extremophilic Bacteria interactions with Germanium Surfaces

NASA Astrophysics Data System (ADS)

Sah, Vasu R.

Supported by a consortium of semiconductor industry sponsors, an international "TIE" project among 5 National Science Foundation (NSF) Industry/university Cooperative Research Centers discovered that a particular extremophilic microbe, Pseudomonas syzygii, persists in the UltraPure Water (UPW) supplies of chip fabrication facilities (FABs) and can bio-corrode germanium wafers to produce microbe-encased optically transparent crystals. Considered as potentially functional "biochips", this investigation explored mechanisms for the efficient and deliberate production of such microbe-germania adducts as a step toward later testing of their properties as sensors or switches in bioelectronic or biophotonic circuits. Recirculating UPW (Ultra-Pure Water) and other purified water, laminar-flow loops were developed across 50X20x1mm germanium (Ge) prisms, followed by subsequent examination of the prism surfaces using Multiple Attenuated Internal Reflection InfraRed (MAIR-IR) spectroscopy, Contact Potential measurements, Differential Interference Contrast Light Microscopy (DICLM), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Analysis (EDS), and Electron Spectroscopy for Chemical Analysis (ESCA; XPS). P. syzygii cultures originally obtained from a working FAB at University of Arizona were successfully grown on R2A minimal nutrient media. They were found to be identical to the microbes in stored UPW from the same facility, such microbes routinely capable of nucleation and entrapment within GeO2 crystals on the Ge flow surfaces. Optimum flow rates and exposure times were 1 ml/minute (3.2 s-1 shear rate) for 4 days at room temperature, producing densest crystal arrays at the prism central zones 2-3 cm from the flow inlets. Other flow rates and exposure times have higher shear rate which induces a different nucleation mechanism and saturation of crystal formation. Nucleation events began with square and circular oxide deposits surrounding active attached bacteria, presumably in response to diffusing or spreading metabolic products. They germinated into amorphous germania moats around square crystalline growths incorporating bacteria in the ring centers, sometimes in multiples. Further distances of UPW flow along the prism faces showed both amorphous phase dissolution and crystal "ripening", followed by some crystal shedding and downstream secondary collections of crystal clusters. Microscopic viewing allowed micromanipulator-directed fine wire contacts with individual crystals to assess their electrical characteristics, with limited data due to the ceramic-like refractory properties of the germania crystals. A schematic is presented for the events of nucleation and crystal growth observed, offering the interpretation that Ge oxidation to GeO2 occurs from UV-dissociated water corroding the Ge surface while releasing protons that can drive the metabolic processes keeping the extremophilic organisms alive. It is likely that other extremophilic microorganisms can be similarly entrapped within semiconductor crystals. Further work is now required to discriminate between nucleation by microbial exudates and by the microbial surfaces directly, and to interrogate the crystals grown with advanced electronic and biophotonic probes.

Predictive displays for a process-control schematic interface.

PubMed

Yin, Shanqing; Wickens, Christopher D; Helander, Martin; Laberge, Jason C

2015-02-01

Our objective was to examine the extent to which increasing precision of predictive (rate of change) information in process control will improve performance on a simulated process-control task. Predictive displays have been found to be useful in process control (as well as aviation and maritime industries). However, authors of prior research have not examined the extent to which predictive value is increased by increasing predictor resolution, nor has such research tied potential improvements to changes in process control strategy. Fifty nonprofessional participants each controlled a simulated chemical mixture process (honey mixer simulation) that simulated the operations found in process control. Participants in each of five groups controlled with either no predictor or a predictor ranging in the resolution of prediction of the process. Increasing detail resolution generally increased the benefit of prediction over the control condition although not monotonically so. The best overall performance, combining quality and predictive ability, was obtained by the display of intermediate resolution. The two displays with the lowest resolution were clearly inferior. Predictors with higher resolution are of value but may trade off enhanced sensitivity to variable change (lower-resolution discrete state predictor) with smoother control action (higher-resolution continuous predictors). The research provides guidelines to the process-control industry regarding displays that can most improve operator performance.

CASE/A - COMPUTER AIDED SYSTEM ENGINEERING AND ANALYSIS, ECLSS/ATCS SERIES

NASA Technical Reports Server (NTRS)

Bacskay, A.

1994-01-01

Design and analysis of Environmental Control and Life Support Systems (ECLSS) and Active Thermal Control Systems (ATCS) for spacecraft missions requires powerful software that is flexible and responsive to the demands of particular projects. CASE/A is an interactive trade study and analysis tool designed to increase productivity during all phases of systems engineering. The graphics-based command-driven package provides a user-friendly environment in which the engineer can analyze the performance and interface characteristics of an ECLS/ATC system. The package is useful during all phases of a spacecraft design program, from initial conceptual design trade studies to the actual flight, including pre-flight prediction and in-flight anomaly analysis. The CASE/A program consists of three fundamental parts: 1) the schematic management system, 2) the database management system, and 3) the simulation control and execution system. The schematic management system allows the user to graphically construct a system model by arranging icons representing system components and connecting the components with physical fluid streams. Version 4.1 contains 51 fully coded and documented default component routines. New components can be added by the user through the "blackbox" component option. The database management system supports the storage and manipulation of component data, output data, and solution control data through interactive edit screens. The simulation control and execution system initiates and controls the iterative solution process, displaying time status and any necessary diagnostic messages. In addition to these primary functions, the program provides three other important functional areas: 1) model output management, 2) system utility commands, and 3) user operations logic capacity. The model output management system provides tabular and graphical output capability. Complete fluid constituent mass fraction and properties data (mass flow, pressure, temperature, specific heat, density, and viscosity) is generated at user-selected output intervals and stored for reference. The Integrated Plot Utility (IPU) provides plotting capability for all data output. System utility commands are provided to enable the user to operate more efficiently in the CASE/A environment. The user is able to customize a simulation through optional operations FORTRAN logic. This user-developed code is compiled and linked with a CASE/A model and enables the user to control and timeline component operating parameters during various phases of the iterative solution process. CASE/A provides for transient tracking of the flow stream constituents and determination of their thermodynamic state throughout an ECLSS/ATCS simulation, performing heat transfer, chemical reaction, mass/energy balance, and system pressure drop analysis based on user-specified operating conditions. The program tracks each constituent through all combination and decomposition states while maintaining a mass and energy balance on the overall system. This allows rapid assessment of ECLSS designs, the impact of alternate technologies, and impacts due to changes in metabolic forcing functions, consumables usage, and system control considerations. CASE/A is written in FORTRAN 77 for the DEC VAX/VMS computer series, and requires 12Mb of disk storage and a minimum paging file quota of 20,000 pages. The program operates on the Tektronix 4014 graphics standard and VT100 text standard. The program requires a Tektronix 4014 or later graphics terminal, third party composite graphics/text terminal, or personal computer loaded with appropriate VT100/TEK 4014 emulator software. The use of composite terminals or personal computers with popular emulation software is recommended for enhanced CASE/A operations and general ease of use. The program is available on an unlabeled 9-track 6250 BPI DEC VAX BACKUP format magnetic tape. CASE/A development began in 1985 under contract to NASA/Marshall Space Flight Center. The latest version (4.1) was released in 1990. Tektronix and TEK 4014 are trademarks of Tektronix, Inc. VT100 is a trademark of Digital Equipment Corporation.

Thermionic combustor application to combined gas and steam turbine power plants

NASA Astrophysics Data System (ADS)

Miskolczy, G.; Wang, C. C.; Lieb, D. P.; Margulies, A. E.; Fusegni, L. J.; Lovell, B. J.

A design for the insertion of thermionic converters into the wall of a conventional combustor to produce electricity in a topping cycle is described, and a study for applications in gas and steam generators of 70 and 30 MW is evaluated for engineering and economic feasibility. Waste heat from the thermionic elements is used to preheat the combustor air; the heat absorbed by the elements plus further quenching of the exhaust gases with ammonia is projected to reduce NO(x) emissions to acceptable levels. Schematics, flow diagrams, and components of a computer model for cost projections are provided. It was found that temperatures around the emitters must be maintained above 1,600 K, with maximum efficiency and allowable temperature at 1,800 K, while collectors generate maximally at 950 K, with a corresponding work function of 1.5 eV. Cost sensitive studies indicate an installed price of $475/kW for the topping cycle, with improvements in thermionic converter characteristics bringing the cost to $375/kW at a busbar figure of 500 mills/kWh.

Temperature field measurement research in high-speed diesel engine using laser induced fluorescence technology

NASA Astrophysics Data System (ADS)

Liu, Yongfeng; Zhang, You-tong; Gou, Chenhua; Tian, Hongsen

2008-12-01

Temperature laser- induced- fluorescence (LIF) 2-D imaging measurements using a new multi-spectral detection strategy are reported for high pressure flames in high-speed diesel engine. Schematic of the experimental set-up is outlined and the experimental data on the diesel engine is summarized. Experiment injection system is a third generation Bosch high-pressure common rail featuring a maximum pressure of 160 MPa. The injector is equipped with a six-hole nozzle, where each hole has a diameter of 0.124 mm. and slightly offset (by 1.0 mm) to the center of the cylinder axis to allow a better cooling of the narrow bridge between the exhaust valves. The measurement system includes a blower, which supplied the intake flow rate, and a prototype single-valve direct injection diesel engine head modified to lay down the swirled-type injector. 14-bit digital CCD cameras are employed to achieve a greater level of accuracy in comparison to the results of previous measurements. The temperature field spatial distributions in the cylinder for different crank angle degrees are carried out in a single direct-injection diesel engine.

2D temperature field measurement in a direct-injection engine using LIF technology

NASA Astrophysics Data System (ADS)

Liu, Yongfeng; Tian, Hongsen; Yang, Jianwei; Sun, Jianmin; Zhu, Aihua

2011-12-01

A new multi-spectral detection strategy for temperature laser- induced- fluorescence (LIF) 2-D imaging measurements is reported for high pressure flames in high-speed diesel engine. Schematic of the experimental set-up is outlined and the experimental data on the diesel engine is summarized. Experiment injection system is a third generation Bosch high-pressure common rail featuring a maximum pressure of 160MPa. The injector is equipped with a six-hole nozzle, where each hole has a diameter of 0.124 mm. and slightly offset to the center of the cylinder axis to allow a better cooling of the narrow bridge between the exhaust valves. The measurement system includes a blower, which supplied the intake flow rate, and a prototype single-valve direct injection diesel engine head modified to lay down the swirled-type injector. 14-bit digital CCD cameras are employed to achieve a greater level of accuracy in comparison to the results of previous measurements. The temperature field spatial distributions in the cylinder for different crank angle degrees are carried out in a single direct-injection diesel engine.

Laboratory tests on heat treatment of ballast water using engine waste heat.

PubMed

Balaji, Rajoo; Lee Siang, Hing; Yaakob, Omar; Koh, Kho King; Adnan, Faizul Amri Bin; Ismail, Nasrudin Bin; Ahmad, Badruzzaman Bin; Ismail, Mohd Arif Bin; Wan Nik, W B

2018-05-01

Waste heat recovery from shipboard machineries could be a potential source for heat treatment of ballast water. Similar to a shipboard schematic arrangement, a laboratory-scale engine-heat exchanger set-up harvesting waste heat from jacket water and exhaust gases was erected to test the level of species' mortalities. Mortalities were also assessed under experimental conditions for cultured and natural plankton communities at laboratory level. Effect of pump impellers on species' mortalities were also tested. Exposures between 60°C and 70°C for 60 sec resulted in 80-100% mortalities. Mortalities due to pump impeller effects were observed in the range of 70-100% for zooplankton. On the laboratory-scale arrangement, >95% mortalities of phytoplankton, zooplankton and bacteria were recorded. It was demonstrated that the temperature of tropical sea waters used as secondary coolant can be raised to cause species' mortalities, employing engine exhaust gases. The results also indicated that pump impeller effects will enhance species' mortalities. The limitations of the shipboard application of this method would be the large ballast volumes, flow rates and time for treatment.

Flight evaluation of pneumatic forebody vortex control in post-stall flight

NASA Technical Reports Server (NTRS)

Walchli, Lawrence A.

1994-01-01

The following topics are discussed: (1) X-29 description; Vortex Flow Control (VFC) technology description; (3) X-29 VFC wind tunnel results (forebody only); (4) X-29 VFC wind tunnel results (full configuration yawing moment); (5) X-29 VFC wind tunnel results (full configuration C(sub n) with sideslip); (6) X-29VFC wind tunnel results (full configuration pitching moment); (7) VFC optimized nozzle details; (8) X-29 forebody nozzle configuration; (9) X-29 VFC system stored gas schematic; (10) X-29 VFC system stored gas installation; (11) VFC effectiveness at zero sideslip; (12) VFC effectiveness at 35 AOA with sideslip; (13) 'VFC Roll' at 40 AOA; (14) Effects of VFC on wing rock; (15) Integrated controls C(sub n) prediction; (16) Proposed F-15 with lateral control laws with active VFC; (17) Simulated F-15 roll performance with active VFC; (18) Simulated F-15 spin recovery with active VFC; (19) Test team restructuring; (20) testbed selection; (21) Simulation for risk reduction; (22) Benefits of high pressure system; and (23) Advanced weapon system integration.

Developing of Watershed Radionuclide Transport Model DHSVM-R as Modification and Extension of Distributed Hydrological and Sediment Dynamics Model DHSVM

NASA Astrophysics Data System (ADS)

Zheleznyak, M.; Kivva, S.; Onda, Y.; Nanba, K.; Wakiyama, Y.; Konoplev, A.

2015-12-01

The reliable modeling tools for prediction wash - off radionuclides from watersheds are needed as for assessment the consequences of accidental and industrial releases of radionuclides, as for soil erosion studies using the radioactive tracers. The distributed model of radionuclide transport through watershed in exchangeable and nonexchangeable forms in solute and with sediments was developed and validated for small Chernobyl watersheds in 90th within EU SPARTACUS project (van der Perk et al., 1996). New tendency is coupling of radionuclide transport models and the widely validated hydrological distributed models. To develop radionuclide transport model DHSVM-R the open source Distributed Hydrology Soil Vegetation Model -DHSVM http://www.hydro.washington.edu/Lettenmaier/Models/DHSVM was modified and extended. The main changes provided in the hydrological and sediment transport modules of DHSVM are as follows: Morel-Seytoux infiltration model is added; four-directions schematization for the model's cells flows (D4) is replaced by D8 approach; the finite-difference schemes for solution of kinematic wave equations for overland water flow, stream net flow, and sediment transport are replaced by new computationally efficient scheme. New radionuclide transport module, coupled with hydrological and sediment transport modules, continues SPARTACUS's approach, - it describes radionuclide wash-off from watershed and transport via stream network in soluble phase and on suspended sediments. The hydrological module of DHSVM-R was calibrated and validated for the watersheds of Ukrainian Carpathian mountains and for the subwatersheds of Niida river flowing 137Cs in solute and with suspended sediments to Pacific Ocean at 30 km north of the Fukushima Daiichi NPP. The modules of radionuclide and sediment transport were calibrated and validated versus experimental data for USLE experimental plots in Fukushima Prefecture and versus monitoring data collected in Niida watershed. The role of sediment transport in radionuclide wash-off from mountain and lowland watersheds is analyzed in comparison of modeling results for Chernobyl and Fukushima watersheds.

The circulation in the Levantine Basin as inferred from in-situ data and numerical modelling (1995-2013)

NASA Astrophysics Data System (ADS)

Zodiatis, George; Radhakrishnan, Hari; Lardner, Robin; Hayes, Daniel; Gertman, Isaac; Menna, Milena; Poulain, Pierre-Marie

2014-05-01

The general anticlockwise circulation along the coastline of the Eastern Mediterranean Levantine Basin was first proposed by Nielsen in 1912. Half a century later the schematic of the circulation in the area was enriched with sub-basin flow structures. In late 1980s, a more detailed picture of the circulation composed of eddies, gyres and coastal-offshore jets was defined during the POEM cruises. In 2005, Millot and Taupier-Letage have used SST satellite imagery to argue for a simpler pattern similar to the one proposed almost a century ago. During the last decade, renewed in-situ multi-platforms investigations under the framework of CYBO, CYCLOPS, NEMED, GROOM, HaiSec and PERSEUS projects, as well the development of the operational ocean forecasts and hindcasts in the framework of the MFS, ECOOP, MERSEA and MyOcean projects, have made possible to obtain an improved, higher spatial and temporal resolution picture of the circulation in the area. After some years of scientific disputes on the circulation pattern of the region, the new in-situ data sets and the operational numerical simulations confirm the relevant POEM results. The existing POM-based Cyprus Coastal Ocean Forecasting System (CYCOFOS), downscaling the MyOcean MFS, has been providing operational forecasts in the Eastern Mediterranean Levantine Basin region since early 2002. Recently, Radhakrishnan et al. (2012) parallelized the CYCOFOS hydrodynamic flow model using MPI to improve the accuracy of predictions while reducing the computational time. The parallel flow model is capable of modeling the Eastern Mediterranean Levantine Basin flow at a resolution of 500 m. The model was run in hindcast mode during which the innovations were computed using the historical data collected using gliders and cruises. Then, DD-OceanVar (D'Amore et al., 2013), a data assimilation tool based on 3DVAR developed by CMCC was used to compute the temperature and salinity field corrections. Numerical modeling results after the data assimilation will be presented.

On the hydrological-hydraulic modelling of hillslope dry-stone walls

NASA Astrophysics Data System (ADS)

Perlotto, Chiara; Michelini, Tamara; D'Agostino, Vincenzo

2015-04-01

Terraces are among the most evident human signatures on the landscape as they cover large cultivated territories of the Earth. The importance of dry-stone walls to realize bench terraces has always played a key role in the management of the agricultural hilly/mountain areas. These works are generally built to allow tractors and ploughs to operate under acceptable conditions, to make human work in the slopes easy and comfortable, and to promote irrigation. Few studies in literature are available on rainfall-runoff transformation and flood risk mitigation in terrace areas. Then, research results in this field are still scarce. Bench terraces reduce the terrain slope and the length of the overland flow, quantitatively controlling the runoff flow velocity, facilitating the drainage and thus leading to a reduction of soil erosion. As to the hydrological response, a terraced slope should result in a reduction in the peak runoff at the toe of hillslope and in a delay in the passage of the peak flows. This fact occurs mainly due to the change of the original land topography. The goal of this study is highlighting the benefit in terms of runoff reduction, which is provided by sequence of dry-stone walls under different space arrangements along the hillslope. In particular, the FLO-2D model was recursively applied to a schematic hillslope simulating both the local variations of the hydrological soil characteristics and the morphological stepped profile of the bench terraces. The simulations have been carried out by varying the main parameters underlying the design of the terrace system (spacing, height and number of terraces). The results have shown an interesting clear linkage between the peak-discharge reduction of the overland flows and the area extent, which is consolidated by means of the dry-stone walls. The modelling outcomes well support and inform design criteria, cost-benefit analysis and the assessment of the functionality level of this historical consolidation system.

Electro-Mechanical Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This electromechanical technician curriculum covers the following general areas: (1) basic soldering; (2) reading diagrams and following schematics; and (3) repairing circuitry and mechanics common to major appliances, vending machines, amusement equipment, and small office machines. The manual includes the following sections: (1) course…

Harnessing Macroscopic Forces in Catalysis

DTIC Science & Technology

2009-11-09

Figure 1. Schematic representation of biasing reaction selectivity via mechanocatalysis. A catalyst, “ mcat ”, is embedded in an elastomeric support...Deformation of the elastomeric support transfers mechanical stress to mcat . Under stress-free conditions, mcat catalyzes the transformation of reactant

Possible form of vacuum deformation by heavy particles

NASA Technical Reports Server (NTRS)

Mackenzie, R.; Wilczek, F.; Zee, A.

1984-01-01

The possibility is discussed that the lowest-energy state for certain quantum numbers involves a Higgs field polarized into a skyrmion-type configuration. In some models a new type of vacuum instability arises. Phenomenological consequences are indicated schematically.

30 CFR 251.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... fossil content, core analyses, laboratory analyses of physical and chemical properties, well logs or... geological information means knowledge, often in the form of schematic cross sections, 3-dimensional... form of seismic cross sections, 3-dimensional representations, and maps, developed by determining the...

30 CFR 251.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... fossil content, core analyses, laboratory analyses of physical and chemical properties, well logs or... geological information means knowledge, often in the form of schematic cross sections, 3-dimensional... form of seismic cross sections, 3-dimensional representations, and maps, developed by determining the...

30 CFR 551.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... been analyzed. Analysis may include, but is not limited to, identification of lithologic and fossil... the form of schematic cross sections, 3-dimensional representations, and maps, developed by.... Interpreted geophysical information means knowledge, often in the form of seismic cross sections, 3...

30 CFR 551.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... been analyzed. Analysis may include, but is not limited to, identification of lithologic and fossil... the form of schematic cross sections, 3-dimensional representations, and maps, developed by.... Interpreted geophysical information means knowledge, often in the form of seismic cross sections, 3...

30 CFR 251.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... fossil content, core analyses, laboratory analyses of physical and chemical properties, well logs or... geological information means knowledge, often in the form of schematic cross sections, 3-dimensional... form of seismic cross sections, 3-dimensional representations, and maps, developed by determining the...

30 CFR 551.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... been analyzed. Analysis may include, but is not limited to, identification of lithologic and fossil... the form of schematic cross sections, 3-dimensional representations, and maps, developed by.... Interpreted geophysical information means knowledge, often in the form of seismic cross sections, 3...

Drafting. Advanced Print Reading--Electrical.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem.

This document is a workbook for drafting students learning advanced print reading for electricity applications. The workbook contains seven units covering the following material: architectural working drawings; architectural symbols and dimensions; basic architectural electrical symbols; wiring symbols; riser diagrams; schematic diagrams; and…

Wobbly Planet Orbital Schematic Illustration

NASA Image and Video Library

2014-02-04

This illustration shows the unusual orbit of planet Kepler-413b around a close pair of orange and red dwarf stars. The planet 66-day orbit is tilted 2.5 degrees with respect to the plane of the binary stars orbit.

BOPACE 3-D addendum: The Boeing plastic analysis capabilities for 3-dimensional solids using isoparametric finite elements

NASA Technical Reports Server (NTRS)

Vos, R. G.; Straayer, J. W.

1975-01-01

Modifications and additions incorporated into the BOPACE 3-D program are described. Updates to the program input data formats, error messages, file usage, size limitations, and overlay schematic are included.

A system for aerodynamic design and analysis of supersonic aircraft. Part 3: Computer program description

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

1980-01-01

The computer program documentation for the design and analysis of supersonic configurations is presented. Schematics and block diagrams of the major program structure, together with subroutine descriptions for each module are included.

Redundancy approaches in bubble domain memories

NASA Technical Reports Server (NTRS)

Almasi, G. S.; Schuster, S. E.

1972-01-01

Fabrication of integrated circuit chips to compensate for faulty memory elements is discussed. Procedure for testing chips to determine extent of redundancy and faults is described. Mathematical model to define operation is presented. Schematic circuit diagram of test equipment is provided.

Development in attention functions and social processing: Evidence from the Attention Network Test.

PubMed

Federico, Francesca; Marotta, Andrea; Martella, Diana; Casagrande, Maria

2017-06-01

According to the attention network approach, attention is best understood in terms of three functionally and neuroanatomically distinct networks - alerting, orienting, and executive attention. Recent findings showed that social information influences the efficiency of these networks in adults. Using some social and non-social variants of the Attentional Network Test (ANT), this study was aimed to evaluate the development of the three attention networks in childhood, also assessing the development of the ability to manage social or non-social conflicting information. Sixty-six children (three groups of 6, 8, and 10 years of age) performed three variants of the original ANT, using fish, schematic, or real faces looking to the left or right as target and flanker stimuli. Results showed an improvement from 6 to 8 and 10 years of age in reaction time (RT) and accuracy, together with an improvement of executive control and a decrement in alerting. These developmental changes were not unique to social stimuli, and no differences were observed between social and no-social variants of the ANT. However, independently from the age of the children, a real face positively affected the executive control (as indexed by RTs) as compared to both a schematic face and a fish. Findings of this study suggest that attentional networks are still developing from 6 to 10 years of age and underline the importance of face information in modulating the efficiency of executive control. Statement of contribution What is already known? Younger children made more errors and slower reaction times (RTs) than older children, in line with the majority of the past selective attention studies. Younger children showed both greater conflict and alerting effect than older children. The prediction that younger children would display larger interference effects than older children was supported. What does this study add? Extending the findings observed in adults and children, independently from their age, demonstrated greater cognitive interference (i.e., slower RTs and higher percentage of errors to incongruent relative to congruent conditions) when fish and schematic faces were presented than when photographs of real faces were used as stimuli. Like adults, children have a greater ability in the control of social information as compared to non-social information. These results seem to indicate that the ability to handle social conflicts proceeds in parallel with the ability to manage non-social conflicting information. © 2016 The British Psychological Society.

Satellite-based Monotoring of mitiple natural disasters in Mongolian socio-ecological system

NASA Astrophysics Data System (ADS)

Kang, Sinkyu

2016-04-01

In this presentation, a conceptual mechanisms how multiple natural hazards (i.e. drought, dust storm, land degradation, and Dzud) in Mongolia are linked with each other and how satellite earth observation (EO) data can be utilized to analyze cause-and results relations and to predict the natural hazards. Massive loss of livestock and wildlife animal during winter seasons (dzud) is an endemic climatic disaster in the Central Asia grasslands but the mechanisms are not well understood yet. Recent national-wide sever Dzud occurred during 2009-2010 winter in Mongolia. Whereas, high stocking rate of livestock may give negative effects on sustainable use of pastureland. Dzud is a natural mechanism reducing grazing pressure when stocking rate is high enough to cause the negative effect. Both Dzud and land degradation were directly linked with drought phenomena, which is associated with dust storm occurrence because those conditions can cause sparse vegetation and increase of sensible heat generating strong vertical wind. At a lower level of administration (i.e., soum), stepwise multiple regression analysis was conducted to find significant factors of inter-annual livestock change. For a period from 2003 to 2010, various datasets were prepared from national census and satellite data (summer and winter temperature and precipitation, and summer dryness and vegetation index, NDVI). As results, linear regression models were successfully produced at 70% of soums studied. Summer and winter variables appeared equally important in controlling livestock dynamics. Single-factor models were predominant. The primary factor of each soum showed certain regional patterns incident well with climate severity and foraging resource availability (e.g. temperature in north, dryness in south, and NDVI in middle). Our results indicate that Mongolian pastoral livelihood is highly vulnerable to extreme variability of endemic regional climate factors and hence, there are still rooms for enhancing socio-ecological adaptive capacity such as herder's preparedness and governance. We illustrate the seasonal climate-vegetation-livestock interactions with a simplified schematic mechanism model. Our schematic model refined it to give better process-oriented relationships among key variables. Seasonal temperature and precipitation are the primary forcing variables to determine vegetation growth and livestock accessibility to food resources and dryness. Summer standing biomass and winter dry biomass (i.e. residue) were separated and associated with seasonal livestock foraging, respectively. By its mechanistic nature, the schematic model can be applied to test statistical significance of factors associated with annual livestock change or to provide logical grounds on developing a dynamic numerical model in future.