An interactive local flattening operator to support digital investigations on artwork surfaces.

PubMed

Pietroni, Nico; Massimiliano, Corsini; Cignoni, Paolo; Scopigno, Roberto

2011-12-01

Analyzing either high-frequency shape detail or any other 2D fields (scalar or vector) embedded over a 3D geometry is a complex task, since detaching the detail from the overall shape can be tricky. An alternative approach is to move to the 2D space, resolving shape reasoning to easier image processing techniques. In this paper we propose a novel framework for the analysis of 2D information distributed over 3D geometry, based on a locally smooth parametrization technique that allows us to treat local 3D data in terms of image content. The proposed approach has been implemented as a sketch-based system that allows to design with a few gestures a set of (possibly overlapping) parameterizations of rectangular portions of the surface. We demonstrate that, due to the locality of the parametrization, the distortion is under an acceptable threshold, while discontinuities can be avoided since the parametrized geometry is always homeomorphic to a disk. We show the effectiveness of the proposed technique to solve specific Cultural Heritage (CH) tasks: the analysis of chisel marks over the surface of a unfinished sculpture and the local comparison of multiple photographs mapped over the surface of an artwork. For this very difficult task, we believe that our framework and the corresponding tool are the first steps toward a computer-based shape reasoning system, able to support CH scholars with a medium they are more used to. © 2011 IEEE

Diana Al-Hadid: Identity and Heritage

ERIC Educational Resources Information Center

Jungerberg, Tom; Smith, Anna; Borsh, Colleen

2012-01-01

Diana Al-Hadid's sculptures reflect the many locations, cultures, histories, and mythologies that have shaped her as an artist. In large-scale works which have the appearance of architectural ruins, Al-Hadid employs imagery drawn from many diverse interests including science and technology, history, and literature. She also incorporates images and…

Multi-Source 3d Models Supporting Ultrasonic Test to Investigate AN Egyptian Sculpture of the Archaeological Museum in Bologna

NASA Astrophysics Data System (ADS)

Di Pietra, V.; Donadio, E.; Picchi, D.; Sambuelli, L.; Spanò, A.

2017-02-01

The paper presents the workflow and the results of an ultrasonic 3D investigation and a 3D survey application aimed at the assessment of the internal integrity of an ancient sculpture. The work aimed at highlighting the ability of methods devoted to the 3D geometry acquisition of small objects when applied to diagnosis performed by geophysical investigation. In particular, two methods widely applied for small objects modelling are considered and compared, the digital Photogrammetry with the Structure from Motion (SFM) technique and hand-held 3D scanners. The study concludes with the aim to enhance the final graphical representation of the tomographic results and to subject the obtained results to a quantitative analysis. The survey is applied to the Egyptian naophorous statue of Amenmes and Reshpu, which dates to the reign of Ramses II (1279-1213 BC) or later and is now preserved in the Civic Archaeological Museum in Bologna. In order to evaluate the internal persistency of fractures and visible damages, a 3D Ultrasonic Tomographic Imaging (UTI) test has been performed and a multi-sensor survey (image and range based) was conducted, in order to evaluate the locations of the source and receiver points as accurate as possible The presented test allowed to evaluate the material characteristics, its porosity and degradation state, which particularly affect the lower part of the statue. More in general, the project demonstrated how solution coming from the field of 3D modelling of Cultural Heritage allow the application of 3D ultrasonic tomography also on objects with complex shapes, in addition to the improved representation of the obtained results.

Review of the research on “structural bionic” method of large sculpture

NASA Astrophysics Data System (ADS)

Yin, Jiang; Yang, Wenchang

2017-09-01

This paper presented the basic concept of bionic sculpture and summarized the application status of “structural bionic”theory in large bionic sculpture field. Introduced the development trend and challenges of large bionic sculpture and pointed out that the sculpture's “structural bionic” can bring higher mechanical performance of the new structure and system, The evaluation method and structure design for large bionic sculpture are urgently needed.Finally prospected the market of the large bionic sculpture.

An Old Dog and New Tricks

ERIC Educational Resources Information Center

Hinshaw, Craig

2011-01-01

Glass as an art form is anything but new. Three thousand years ago the Egyptians were molding glass beads and shaping elegant glass perfume bottles. In this article, the author describes how his students created sun catchers inspired by the beauty of Notre Dame's stained glass windows and the intrigue of Dale Chihuly's sculptures. (Contains 1…

Digitally-Assisted Stone Carving of a Relief Sculpture for the Parliament Buildings National Historic Site of Canada

NASA Astrophysics Data System (ADS)

Hayes, J.; Fai, S.; Kretz, S.; Ouimet, C.; White, P.

2015-08-01

The emerging field of digital fabrication is a process where three-dimensional datasets can be directly transferred to fabrication equipment to create models or even 1:1 building elements. In this paper, we will discuss the results of a collaboration between the Carleton Immersive Media Studio (CIMS), the Dominion Sculptor of Canada, and the Heritage Conservation Directorate (HCD) of Public Works and Government Services Canada (PWGSC), that utilizes digital fabrication technologies in the development of a digitally-assisted stone carving process. The collaboration couples the distinguished skill of the Dominion Sculptor with the latest digital acquisition and digital fabrication technologies for the reconstruction of a deteriorated stone bas-relief on the façade of the East Block building of the Parliament Buildings National Historic Site of Canada. The intention of the research is to establish a workflow of hybrid digital/analogue methodologies from acquisition through rehabilitation and ultimately to the fabrication of stone elements.

MicroEcos: Micro-Scale Explorations of Large-Scale Late Pleistocene Ecosystems

NASA Astrophysics Data System (ADS)

Gellis, B. S.

2017-12-01

Pollen data can inform the reconstruction of early-floral environments by providing data for artistic representations of what early-terrestrial ecosystems looked like, and how existing terrestrial landscapes have evolved. For example, what did the Bighorn Basin look like when large ice sheets covered modern Canada, the Yellowstone Plateau had an ice cap, and the Bighorn Mountains were mantled with alpine glaciers? MicroEcos is an immersive, multimedia project that aims to strengthen human-nature connections through the understanding and appreciation of biological ecosystems. Collected pollen data elucidates flora that are visible in the fossil record - associated with the Late-Pleistocene - and have been illustrated and described in botanical literature. It aims to make scientific data accessible and interesting to all audiences through a series of interactive-digital sculptures, large-scale photography and field-based videography. While this project is driven by scientific data, it is rooted in deeply artistic and outreach-based practices, which include broad artistic practices, e.g.: digital design, illustration, photography, video and sound design. Using 3D modeling and printing technology MicroEcos centers around a series of 3D-printed models of the Last Canyon rock shelter on the Wyoming and Montana border, Little Windy Hill pond site in Wyoming's Medicine Bow National Forest, and Natural Trap Cave site in Wyoming's Big Horn Basin. These digital, interactive-3D sculpture provide audiences with glimpses of three-dimensional Late-Pleistocene environments, and helps create dialogue of how grass, sagebrush, and spruce based ecosystems form. To help audiences better contextualize how MicroEcos bridges notions of time, space, and place, modern photography and videography of the Last Canyon, Little Windy Hill and Natural Trap Cave sites surround these 3D-digital reconstructions.

Origin and implications of non-radial Imbrium Sculpture on the Moon.

PubMed

Schultz, Peter H; Crawford, David A

2016-07-21

Rimmed grooves, lineations and elongate craters around Mare Imbrium shape much of the nearside Moon. This pattern was coined the Imbrium Sculpture, and it was originally argued that it must have been formed by a giant oblique (~30°) impact, a conclusion echoed by later studies. Some investigators, however, noticed that many elements of the Imbrium Sculpture are not radial to Imbrium, thereby implicating an endogenic or structural origin. Here we use these non-radial trends to conclude that the Imbrium impactor was a proto-planet (half the diameter of Vesta), once part of a population of large proto-planets in the asteroid belt. Such independent constraints on the sizes of the Imbrium and other basin-forming impactors markedly increase estimates for the mass in the asteroid belt before depletion caused by the orbital migration of Jupiter and Saturn. Moreover, laboratory impact experiments, shock physics codes and the groove widths indicate that multiple fragments (up to 2% of the initial diameter) from each oblique basin-forming impactor, such as the one that formed Imbrium, should have survived planetary collisions and contributed to the heavy impact bombardment between 4.3 and 3.8 billion years ago.

Origin and implications of non-radial Imbrium Sculpture on the Moon

NASA Astrophysics Data System (ADS)

Schultz, Peter H.; Crawford, David A.

2016-07-01

Rimmed grooves, lineations and elongate craters around Mare Imbrium shape much of the nearside Moon. This pattern was coined the Imbrium Sculpture, and it was originally argued that it must have been formed by a giant oblique (~30°) impact, a conclusion echoed by later studies. Some investigators, however, noticed that many elements of the Imbrium Sculpture are not radial to Imbrium, thereby implicating an endogenic or structural origin. Here we use these non-radial trends to conclude that the Imbrium impactor was a proto-planet (half the diameter of Vesta), once part of a population of large proto-planets in the asteroid belt. Such independent constraints on the sizes of the Imbrium and other basin-forming impactors markedly increase estimates for the mass in the asteroid belt before depletion caused by the orbital migration of Jupiter and Saturn. Moreover, laboratory impact experiments, shock physics codes and the groove widths indicate that multiple fragments (up to 2% of the initial diameter) from each oblique basin-forming impactor, such as the one that formed Imbrium, should have survived planetary collisions and contributed to the heavy impact bombardment between 4.3 and 3.8 billion years ago.

Change Ringing - communicating climate change through contemporary classical music

NASA Astrophysics Data System (ADS)

Kapur, Ravi; Osborn, Laurence; Shenai, Peter

2016-04-01

Change Ringing is a collaborative artwork by artist Peter Shenai and composer Laurence Osborn that forms around a playable sculpture and a large-scale composition. The sculpture incorporates a set of six bronze bells designed and cast by artist Peter Shenai. Their shapes are mathematically derived from graphic statistical representations of summer temperatures at seventeen-year intervals over the course of the twentieth century. Arranged according to the chronology of their corresponding data sets and struck in order, the bells voice a series of inharmonic spectra that communicate sonically the story of climate change during the twentieth century. This series forms the basis for Laurence Osborn's twenty-five minute composition, scored for string orchestra and the bells themselves. In Change Ringing, an artwork that combines music, sculpture, performance, and ritual, we want to move audiences and, in doing so, facilitate their engagement with ideas that are highly relevant today. We believe that the medium of musically organized sound, so often wrongly dismissed as "abstract" and non-referential, can be a more than adequate reflection of lived human experience in the 21st Century, and we work in the hope that Change Ringing will connect with contemporary audiences on the most fundamental level.

Nanofinishing of freeform/sculptured surfaces: state-of-the-art

NASA Astrophysics Data System (ADS)

Nagdeve, Leeladhar; Jain, V. K.; Ramkumar, J.

2018-06-01

Freeform surfaces are being used in a multiplicity of applications in different kinds of industries related to Bio-medical (Bio-implants), micro channels in micro fluidics, automotives, turbine blades, impellers of artificial heart pumps, automobiles etc. Different parts in these industries need nano-level surface finish as their functional inevitability. It is very difficult and challenging to achieve high level of surface finish, especially on the components having freeform (or sculptured) surfaces, complex shapes, and 3-D features. Surface finish is a significant factor, which affects life and functionality of a product. Many traditional and advanced finishing processes have been developed for finishing of freeform/sculptured surfaces but still it has not been possible to achieve uniform nano level surface finish specially in case of freeform surfaces. To overcome the limitations of the existing nanofinishing processes, researchers are developing new processes for uniform nanofinishing of freeform surfaces. In this article, an attempt has been made to review different nanofinishing processes employed for freeform surfaces useful in different types of applications. In addition, experimental work, theoretical analysis and existing challenges of the finishing processes have been identified to fill the research gap.

The Virtual Steel Sculpture--Limit State Analyses and Applications of Steel Connections

ERIC Educational Resources Information Center

Chou, Karen C.; Moaveni, Saeed; Sapp, James D.

2017-01-01

The integrity of a structural system depends on the strength of materials, shape of the individual member and the elements used to hold the members together. In most undergraduate civil engineering curricula, a structural steel and/or reinforced concrete design course is required. Usually, the main focus of these courses is on member selection…

Matisse + a Math Connection

ERIC Educational Resources Information Center

Swope, Darcy M.

2009-01-01

It is no wonder that works of art by Henri Matisse appeal to children, as his work has been said to "invite participation." His use of shape, color, design, and composition make his creations stand apart from others. By sharing examples of his line drawings, paintings, sculptures, and paper cutouts, children gain the sense that making art can be a…

Analysis of a Brazilian baroque sculpture using Raman spectroscopy and FT-IR

NASA Astrophysics Data System (ADS)

Freitas, Renato P.; Ribeiro, Iohanna M.; Calza, Cristiane; Oliveira, Ana L.; Felix, Valter S.; Ferreira, Douglas S.; Pimenta, André R.; Pereira, Ronaldo V.; Pereira, Marcelo O.; Lopes, Ricardo T.

2016-02-01

In this study, samples were taken from the sculpture of Our Lady of Sorrows and analyzed by Raman spectroscopy and FT-IR. This sculpture has been dated to the early eighteenth century. Samples were also examined using optical microscopy and Energy Dispersive Spectroscopy (EDS). Based on chemical analysis, the pigments vermilion [HgS], massicot [PbO] and azurite [Cu3(CO3)2(OH)2] were found in the sculpture polychrome. The results indicate that the green polychrome of the sculpture's mantle comes from the blending of massicot and azurite. Because the literature reports that the mantle of the Our Lady of Sorrows sculpture is blue, the mixing of these pigments results from a production error. The results also indicate the presence of Au in the sculpture, which indicates the originality of the piece. The results from this study helped restorers to choose the appropriate procedures for intervening in the sculpture and contributed to the knowledge about the manufacturing process of Brazilian baroque sculptures.

Art Education: Sculpture Metallic Formations I.

ERIC Educational Resources Information Center

Dubocq, Edward R.

A course in sculptural art in the areas of welding, brazing and soldering is presented. The objective of the course is to introduce the student to these aspects of metal sculpture. Course content includes techniques in metal sculpture. (CK)

Two new species of Tardigrada (Eutardigrada: Ramazzottiidae, Macrobiotidae) from the supralittoral zone of the Atlantic Iberian Peninsula rocky shores.

PubMed

Fontoura, Paulo; Rubal, Marcos; Veiga, Puri

2017-05-10

Two new species of Eutardigrada were found in supralittoral lichens, growing on rocky shores at two localities of the Western Atlantic coast of the Iberian Peninsula. Ramazzottius littoreus sp. nov., found in San Cibrao (North of Spain), has the dorsal cuticle sculptured with small tubercles and claws with accessory points similar to R. oberhaeuseri. It can be distinguished from all the other known Ramazzottius species with the same type of cuticular sculpture by the dotted egg shell and the peculiar reticulation visible at the bulbous base of egg processes. Macrobiotus halophilus sp. nov., found in Cascais (Centre of Portugal), belongs to the Macrobiotus hufelandi group. The slightly wrinkled egg shell and egg processes in the shape of inverted chalice with dentate distal disc, identifies it as a member of the Macrobiotus persimilis subgroup. The new dioecious species differs from the six other species of the M. persimilis subgroup by a unique combination of some characters (small and very sparse circular cuticular pores, granulation on legs I-III and dentate lunules on legs IV), by measurements of some structures (claws and buccal apparatus), and by the number, dimension and shape of egg processes.

Restitution of Sculptural Groups Using 3D Scanners

PubMed Central

Merchán, Pilar; Salamanca, Santiago; Adán, Antonio

2011-01-01

Imagine for a moment that you have to solve a 3D jigsaw of which you have lost several pieces. You have also lost the original box-top showing the final picture, and as if that were not enough, some of the pieces you do have may belong to some other jigsaw. This is in essence the sort of challenge that we faced in the novel project that we shall be describing in this paper. The final aim of the project was, with the help of 3D scanners, to digitalize and reconstruct multi-piece classical sculptures. Particularly, we tackle the restitution of the so-called “Aeneas Group”, a famous iconographic reference during the Roman Empire. We have undertaken this ambitious project in collaboration with the research department of the Spanish National Museum of Roman Art (MNAR). This paper summarizes the real problems that arose and had to be solved, the innovations, and the main results of the work that we have carried out over these recent years. PMID:22164088

Origin and implications of non-radial Imbrium Sculpture on the Moon

DOE PAGES

Schultz, Peter H.; Crawford, David A.

2016-07-20

Rimmed grooves, lineations and elongate craters around Mare Imbrium shape much of the nearside Moon. This pattern was coined the Imbrium Sculpture 1, and it was originally argued that it must have been formed by a giant oblique (~30°) impact, a conclusion echoed by later studies 2. Some investigators, however, noticed that many elements of the Imbrium Sculpture are not radial to Imbrium, thereby implicating an endogenic or structural origin 3, 4. Here we use these non-radial trends to conclude that the Imbrium impactor was a proto-planet (half the diameter of Vesta), once part of a population of large proto-planetsmore » in the asteroid belt. Such independent constraints on the sizes of the Imbrium and other basin-forming impactors markedly increase estimates for the mass in the asteroid belt before depletion caused by the orbital migration of Jupiter and Saturn 5. Furthermore, laboratory impact experiments, shock physics codes and the groove widths indicate that multiple fragments (up to 2% of the initial diameter) from each oblique basin-forming impactor, such as the one that formed Imbrium, should have survived planetary collisions and contributed to the heavy impact bombardment between 4.3 and 3.8 billion years ago.« less

Balloon Sculpture

ERIC Educational Resources Information Center

Warwick, James F.

1976-01-01

For the adventurous teacher and student there is an alternative to the often messy mixing, pouring, casting, cutting, scoring and sanding of plaster of Paris for casting or sculptural projects. Balloon sculpture, devised, designed and shown here by a sculptor/teacher, is an eye appealing sculptural form and holds a strong interest for students.…

37 CFR 202.10 - Pictorial, graphic, and sculptural works.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sculptural works. 202.10 Section 202.10 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF... Pictorial, graphic, and sculptural works. (a) In order to be acceptable as a pictorial, graphic, or sculptural work, the work must embody some creative authorship in its delineation or form. The registrability...

Activity Sculptures: Exploring the Impact of Physical Visualizations on Running Activity.

PubMed

Stusak, Simon; Tabard, Aurélien; Sauka, Franziska; Khot, Rohit Ashok; Butz, Andreas

2014-12-01

Data sculptures are a promising type of visualizations in which data is given a physical form. In the past, they have mostly been used for artistic, communicative or educational purposes, and designers of data sculptures argue that in such situations, physical visualizations can be more enriching than pixel-based visualizations. We present the design of Activity Sculptures: data sculptures of running activity. In a three-week field study we investigated the impact of the sculptures on 14 participants' running activity, the personal and social behaviors generated by the sculptures, as well as participants' experiences when receiving these individual physical tokens generated from the specific data of their runs. The physical rewards generated curiosity and personal experimentation but also social dynamics such as discussion on runs or envy/competition. We argue that such passive (or calm) visualizations can complement nudging and other mechanisms of persuasion with a more playful and reflective look at ones' activity.

A Virtual Steel Sculpture for Structural Engineering Education: Development and Initial Findings

ERIC Educational Resources Information Center

Dib, Hazar Nicholas; Adamo-Villani, Nicoletta

2016-01-01

We describe the development and evaluation of a virtual steel sculpture for engineering education. A good connection design requires the engineer to have a solid understanding of the mechanics and steel behavior. To help students better understand various connection types, many schools have acquired steel sculptures. A steel sculpture is a…

Art and science: geodesy in materials science.

PubMed

Kroto, Harold

2010-09-01

A 3-dimensional model based on a molecular structural recipe having some unique and unexpected shape characteristics is demonstrated. The project was originally initiated to satisfy the aesthetic creative impulse to build a 3-dimensional model or sculpture. Further scientific investigation explained some important nanoscale structural observations that had been seen many years beforehand and mistakenly explained. This is a rare example of artistic creativity resulting in a key scientific advance.

Thirty years since diffuse sound reflection by maximum length

NASA Astrophysics Data System (ADS)

Cox, Trevor J.; D'Antonio, Peter

2005-09-01

This year celebrates the 30th anniversary of Schroeder's seminal paper on sound scattering from maximum length sequences. This paper, along with Schroeder's subsequent publication on quadratic residue diffusers, broke new ground, because they contained simple recipes for designing diffusers with known acoustic performance. So, what has happened in the intervening years? As with most areas of engineering, the room acoustic diffuser has been greatly influenced by the rise of digital computing technologies. Numerical methods have become much more powerful, and this has enabled predictions of surface scattering to greater accuracy and for larger scale surfaces than previously possible. Architecture has also gone through a revolution where the forms of buildings have become more extreme and sculptural. Acoustic diffuser designs have had to keep pace with this to produce shapes and forms that are desirable to architects. To achieve this, design methodologies have moved away from Schroeder's simple equations to brute force optimization algorithms. This paper will look back at the past development of the modern diffuser, explaining how the principles of diffuser design have been devised and revised over the decades. The paper will also look at the present state-of-the art, and dreams for the future.

John Rogers: "Checkers Up at the Farm."

ERIC Educational Resources Information Center

Zeller, Terry

1987-01-01

Based on John Rogers' 1887 painted plaster sculpture called "Checkers Up at the Farm," this lesson seeks to introduce primary-level students to the idea of sculpture in the round and how sculpture can communicate ideas, emotions, and values. (JDH)

The thinker: opposing directionality of lighting bias within sculptural artwork

PubMed Central

Sedgewick, Jennifer R.; Weiers, Bradley; Stewart, Aaron; Elias, Lorin J.

2015-01-01

Individuals tend to perceive the direction of light to come from above and slightly from the left; it has been speculated that this phenomenon is also producing similar lighting preferences within 2-dimensional artworks (e.g., paintings, advertisements). The purpose of the present study was to address if lighting bias was present in the 3-dimensional medium of sculpture by implementing a virtual art gallery lighting paradigm. Thirty-nine participants completed a computer task that consisted of 48 galleries each containing one sculpture (24 original sculptures, 24 mirror-reversed) which was surrounded by eight lights (above/below, left/right, front/back). Participants would select one light source to illuminate the sculpture in a manner they perceived to be the most aesthetically pleasing. The results indicated a significant preference for lights positioned from above and from the right, a finding that is contradictory to previous lighting bias research examining artworks. An interpretation for the rightward bias applies the perceptual concept of subjective lighting equality. Objects illuminated from the left typically appear brighter in comparison to right-side lighting; in sculpture, however, increased luminosity can reduce the sculptural detail, and may have been compensated via right-side lighting choices within the lighting task. PMID:25999840

Abstract Sculptures: Wire and Plaster Cloth Creations.

ERIC Educational Resources Information Center

Hiller, Peter

2001-01-01

Presents a three-dimensional art project for middle-school students in which they create sculptures of plaster cloth and wire. The introduction explains that they learn about Alexander Calder, a master of using wire in art. Discusses how to make the sculptures. (CMK)

Handedness, Hinduism and sculpture: searching for evidence of lateralisation.

PubMed

Bhushan, Braj; Rai Sapru, Shikha

2008-07-01

The majority of people throughout the world show extreme preference for the right hand. We studied lateral bias depicted in ancient Indian sculptures dating between the 7th and 9th centuries ad. A total of 288 sculptures were selected from various excavation sites/museums and the frequencies were computed on 13 different criteria in order to see the preferential bias for hand depicted in sculptures of male and female figures. The findings are discussed in the light of Hindu mythology and rituals.

One Decade/Four Articles.

ERIC Educational Resources Information Center

Boosahda, Emily; And Others

1985-01-01

Four teaching strategies are described. Secondary students do pop art sculptural forms emulating aspects of the forms of George Segal and Duane Hanson, do a sculpture of an everyday object, and create their own room-sized works. Elementary students do a sculpture in the style of Marisol. (RM)

Local shape of pictorial relief

PubMed Central

Koenderink, Jan; van Doorn, Andrea; Wagemans, Johan

2014-01-01

How is pictorial relief represented in visual awareness? Certainly not as a “depth map,” but perhaps as a map of local surface attitudes (Koenderink & van Doorn, 1995). Here we consider the possibility that observers might instead, or concurrently, represent local surface shape, a geometrical invariant with respect to motions. Observers judge local surface shape, in a picture of a piece of sculpture, on a five-point categorical scale. Categories are cap–ridge–saddle–rut–cup–flat, where “flat” denotes the absence of shape. We find that observers readily perform such a task, with full resolution of a shape index scale (cap–ridge–saddle–rut–cup), and with excellent self-consistency over days. There exist remarkable inter-observer differences. Over a group of 10 naive observers we find that the dispersion of judgments peaks at the saddle category. There may be a relation of this finding to the history of the topic—Alberti's (1827) omission of the saddle category in his purportedly exhaustive catalog of local surface shapes. PMID:25469225

Optimization of digitization procedures in cultural heritage preservation

NASA Astrophysics Data System (ADS)

Martínez, Bea; Mitjà, Carles; Escofet, Jaume

2013-11-01

The digitization of both volumetric and flat objects is the nowadays-preferred method in order to preserve cultural heritage items. High quality digital files obtained from photographic plates, films and prints, paintings, drawings, gravures, fabrics and sculptures, allows not only for a wider diffusion and on line transmission, but also for the preservation of the original items from future handling. Early digitization procedures used scanners for flat opaque or translucent objects and camera only for volumetric or flat highly texturized materials. The technical obsolescence of the high-end scanners and the improvement achieved by professional cameras has result in a wide use of cameras with digital back to digitize any kind of cultural heritage item. Since the lens, the digital back, the software controlling the camera and the digital image processing provide a wide range of possibilities, there is necessary to standardize the methods used in the reproduction work leading to preserve as high as possible the original item properties. This work presents an overview about methods used for camera system characterization, as well as the best procedures in order to identify and counteract the effect of the lens residual aberrations, sensor aliasing, image illumination, color management and image optimization by means of parametric image processing. As a corollary, the work shows some examples of reproduction workflow applied to the digitization of valuable art pieces and glass plate photographic black and white negatives.

Virtual Steel Connection Sculpture--Student Learning Assessment

ERIC Educational Resources Information Center

Chou, Karen C.; Moaveni, Saeed; Drane, Denise

2016-01-01

A Virtual Steel Connection Sculpture was developed through a grant from the National Science Foundation. The Virtual Sculpture is an interactive tool that shows students and anyone interested in connections how steel members are connected. This tool is created to complement students' steel design courses. The features of this educational tool,…

Chihuly-Inspired Balloon Sculptures

ERIC Educational Resources Information Center

Morice, Erin

2009-01-01

When the glass artist Dale Chihuly exhibited his work at the Missouri Botanical Garden, the author took a class of fourth-grade students to view the artist's extraordinary sculptures. Just as the author predicted, the students were in awe of Chihuly's organic three-dimensional sculptures. Before taking the field trip to the Missouri Botanical…

Mathematical String Sculptures: A Case Study in Computationally-Enhanced Mathematical Crafts

ERIC Educational Resources Information Center

Eisenberg, Michael

2007-01-01

Mathematical string sculptures constitute an extremely beautiful realm of mathematical crafts. This snapshot begins with a description of a marvelous (and no longer manufactured) toy called Space Spider, which provided a framework with which children could experiment with string sculptures. Using a computer-controlled laser cutter to create frames…

Optical filters for linearly polarized light using sculptured nematic thin flim of TiO2

NASA Astrophysics Data System (ADS)

Muhammad, Zahir; Wali, Faiz; Rehman, Zia ur

2018-05-01

A study of optical filters using sculptured nematic thin films is presented in this article. A central 90◦ twist-defect between two sculptured nematic thin films (SNTFs) sections transmit light of same polarization state and reflect other in the spectral Bragg regime. The SNTFs reflect light of both linearly polarized states in the Bragg regime if the amplitude of modulation of vapor incident angle is increased. A twist-defect in a tilt-modulated sculptured nematic thin films as a result produces bandpass or ultra-narrow bandpass filter depending upon the thickness of the SNTFs. However, both the bandpass or/and ultra-narrow bandpass filters can make polarization-insensitive Bragg mirrors by the appropriate modulation of the tilted 2D nanostructures of a given sculptured nematic thin films. Moreover, it is also observed that the sculptured nematic thin films are very tolerant of the structural defects if the amplitude of modulating vapor incident angle of the structural nano-materials is sufficiently large. Similarly, we observed the affect of incident angles on Bragg filters.

Does skull morphology constrain bone ornamentation? A morphometric analysis in the Crocodylia.

PubMed

Clarac, F; Souter, T; Cubo, J; de Buffrénil, V; Brochu, C; Cornette, R

2016-08-01

Previous quantitative assessments of the crocodylians' dermal bone ornamentation (this ornamentation consists of pits and ridges) has shown that bone sculpture results in a gain in area that differs between anatomical regions: it tends to be higher on the skull table than on the snout. Therefore, a comparative phylogenetic analysis within 17 adult crocodylian specimens representative of the morphological diversity of the 24 extant species has been performed, in order to test if the gain in area due to ornamentation depends on the skull morphology, i.e. shape and size. Quantitative assessment of skull size and shape through geometric morphometrics, and of skull ornamentation through surface analyses, produced a dataset that was analyzed using phylogenetic least-squares regression. The analyses reveal that none of the variables that quantify ornamentation, be they on the snout or the skull table, is correlated with the size of the specimens. Conversely, there is more disparity in the relationships between skull conformations (longirostrine vs. brevirostrine) and ornamentation. Indeed, both parameters GApit (i.e. pit depth and shape) and OArelat (i.e. relative area of the pit set) are negatively correlated with snout elongation, whereas none of the values quantifying ornamentation on the skull table is correlated with skull conformation. It can be concluded that bone sculpture on the snout is influenced by different developmental constrains than on the skull table and is sensible to differences in the local growth 'context' (allometric processes) prevailing in distinct skull parts. Whatever the functional role of bone ornamentation on the skull, if any, it seems to be restricted to some anatomical regions at least for the longirostrine forms that tend to lose ornamentation on the snout. © 2016 Anatomical Society.

Multicutter machining of compound parametric surfaces

NASA Astrophysics Data System (ADS)

Hatna, Abdelmadjid; Grieve, R. J.; Broomhead, P.

2000-10-01

Parametric free forms are used in industries as disparate as footwear, toys, sporting goods, ceramics, digital content creation, and conceptual design. Optimizing tool path patterns and minimizing the total machining time is a primordial issue in numerically controlled (NC) machining of free form surfaces. We demonstrate in the present work that multi-cutter machining can achieve as much as 60% reduction in total machining time for compound sculptured surfaces. The given approach is based upon the pre-processing as opposed to the usual post-processing of surfaces for the detection and removal of interference followed by precise tracking of unmachined areas.

Public Sculpture: America's Legacy. America Past and Present. Study Guide.

ERIC Educational Resources Information Center

Powe, Faye; Carter, Richard, Ed.

This guide presents public sculpture as an effective instructional tool, with the primary emphasis on works contributing to a sense of national or community identity. Sculptures are introduced according to the chronology of persons or events commemorated. The 10 lessons focus on United States history from the Civil War to the present. Unit 1:…

Modern and Contemporary Cultural Heritage Documentation and Knowledge by Surveying and its Representation

NASA Astrophysics Data System (ADS)

Balletti, C.; Costa, M.; Guerra, F.; Martinello, F.; Vernier, P.

2018-05-01

Conservation of modern and contemporary cultural heritage, which goes from design objects, to architecture, to cities and territories, is certainly a current topic and in the development phase as it is underway - in the same modernity - a process of systematic replacement of architectural elements, outcome of solutions then experimental, which today are reproduced with contemporary materials, analogous in the appearance, but intimately different especially in the technological content.The paper describes the particular case of La Tour de Meudon, better known as The Tower, (1966) by André Bloc, a contemporary architect of Le Corbusier, founder of L'Architecture d'aujourd'hui, who created his habitable sculptures. All his works mark the evolution of geometric abstraction to the free form, and they are still admirable testimonies of a journey that led him from architecture to architecture. His Architecture and his sculpture intertwine, opening the plastic unity of form in physical space-time. The survey is a fundamental moment for the knowledge of these hybrid architectures, where the structural component is hidden by its evident plasticity, as if it were a large sculpture with abstract and overlapping geometric shapes.Survey isn't only an analysis of geometries: it is instrumental to the other structural and material analyses since it provides a metric and topological basis on which to spatially locate the phenomena being studied. The integrated survey of the building (laser scanning, photogrammetry, topography) has allowed to document his project, contributing to the to definition of the actual construction characteristics and ascertain both the material consistency and the state of conservation.

25 CFR 309.20 - What are examples of sculpture, carving, and pipes that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of sculpture, carving, and pipes that are Indian products? 309.20 Section 309.20 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.20 What are examples of sculpture, carving...

37 CFR 253.8 - Terms and rates of royalty payments for the use of published pictorial, graphic, and sculptural...

Code of Federal Regulations, 2010 CFR

2010-07-01

... payments for the use of published pictorial, graphic, and sculptural works. 253.8 Section 253.8 Patents... BROADCASTING § 253.8 Terms and rates of royalty payments for the use of published pictorial, graphic, and sculptural works. (a) Scope. This section establishes rates and terms for the use of published pictorial...

37 CFR 381.8 - Terms and rates of royalty payments for the use of published pictorial, graphic, and sculptural...

Code of Federal Regulations, 2010 CFR

2010-07-01

... payments for the use of published pictorial, graphic, and sculptural works. 381.8 Section 381.8 Patents... Terms and rates of royalty payments for the use of published pictorial, graphic, and sculptural works. (a) Scope. This section establishes rates and terms for the use of published pictorial, graphic, and...

25 CFR 309.20 - What are examples of sculpture, carving, and pipes that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of sculpture, carving, and pipes that are Indian products? 309.20 Section 309.20 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.20 What are examples of sculpture, carving...

A Semi-Automatic Image-Based Close Range 3D Modeling Pipeline Using a Multi-Camera Configuration

PubMed Central

Rau, Jiann-Yeou; Yeh, Po-Chia

2012-01-01

The generation of photo-realistic 3D models is an important task for digital recording of cultural heritage objects. This study proposes an image-based 3D modeling pipeline which takes advantage of a multi-camera configuration and multi-image matching technique that does not require any markers on or around the object. Multiple digital single lens reflex (DSLR) cameras are adopted and fixed with invariant relative orientations. Instead of photo-triangulation after image acquisition, calibration is performed to estimate the exterior orientation parameters of the multi-camera configuration which can be processed fully automatically using coded targets. The calibrated orientation parameters of all cameras are applied to images taken using the same camera configuration. This means that when performing multi-image matching for surface point cloud generation, the orientation parameters will remain the same as the calibrated results, even when the target has changed. Base on this invariant character, the whole 3D modeling pipeline can be performed completely automatically, once the whole system has been calibrated and the software was seamlessly integrated. Several experiments were conducted to prove the feasibility of the proposed system. Images observed include that of a human being, eight Buddhist statues, and a stone sculpture. The results for the stone sculpture, obtained with several multi-camera configurations were compared with a reference model acquired by an ATOS-I 2M active scanner. The best result has an absolute accuracy of 0.26 mm and a relative accuracy of 1:17,333. It demonstrates the feasibility of the proposed low-cost image-based 3D modeling pipeline and its applicability to a large quantity of antiques stored in a museum. PMID:23112656

A semi-automatic image-based close range 3D modeling pipeline using a multi-camera configuration.

PubMed

Rau, Jiann-Yeou; Yeh, Po-Chia

2012-01-01

The generation of photo-realistic 3D models is an important task for digital recording of cultural heritage objects. This study proposes an image-based 3D modeling pipeline which takes advantage of a multi-camera configuration and multi-image matching technique that does not require any markers on or around the object. Multiple digital single lens reflex (DSLR) cameras are adopted and fixed with invariant relative orientations. Instead of photo-triangulation after image acquisition, calibration is performed to estimate the exterior orientation parameters of the multi-camera configuration which can be processed fully automatically using coded targets. The calibrated orientation parameters of all cameras are applied to images taken using the same camera configuration. This means that when performing multi-image matching for surface point cloud generation, the orientation parameters will remain the same as the calibrated results, even when the target has changed. Base on this invariant character, the whole 3D modeling pipeline can be performed completely automatically, once the whole system has been calibrated and the software was seamlessly integrated. Several experiments were conducted to prove the feasibility of the proposed system. Images observed include that of a human being, eight Buddhist statues, and a stone sculpture. The results for the stone sculpture, obtained with several multi-camera configurations were compared with a reference model acquired by an ATOS-I 2M active scanner. The best result has an absolute accuracy of 0.26 mm and a relative accuracy of 1:17,333. It demonstrates the feasibility of the proposed low-cost image-based 3D modeling pipeline and its applicability to a large quantity of antiques stored in a museum.

A new species of Lataxiena Jousseaume, 1883 (Gastropoda: Muricidae) from the East and South China Seas

NASA Astrophysics Data System (ADS)

Zhang, Suping; Zhang, Shuqian

2015-03-01

A new muricid gastropod species, Lataxiena lutescena sp. nov., is described and illustrated. The new species was recognized during reidentification of the Muricidae collection in the Marine Biological Museum, Chinese Academy of Sciences, Qingdao. The specimens of the new species were collected from the East and South China Seas off Fujian, Guangdong, and Hainan Provinces. Lataxiena lutescena sp. nov. is similar to Lataxiena blosvillei (Deshayes, 1832) in general shape, but can be distinguished from the latter by the shell sculpture and radular characteristics. Lataxiena lutescena sp. nov. also resembles Lataxiena bombayana (Melvill, 1893), but differs from that species in the shell shape and anal notches and in lacking short spines on the shell.

Children and Youth in Mexico Toward the 21st Century. Fulbright-Hays Summer Seminar Abroad Project.

ERIC Educational Resources Information Center

Wiggins, Rose C.

This paper consists of two art curriculum units: (1) mural painting; and (2) sculpture. In the mural painting unit, students analyze and critique works done by Diego Rivera and create a mural using the fresco technique. In the sculpture unit, students create a piece of sculpture that combines influences of past and/or present-day Mexican sculpture…

D Visualization for Virtual Museum Development

NASA Astrophysics Data System (ADS)

Skamantzari, M.; Georgopoulos, A.

2016-06-01

The interest in the development of virtual museums is nowadays rising rapidly. During the last decades there have been numerous efforts concerning the 3D digitization of cultural heritage and the development of virtual museums, digital libraries and serious games. The realistic result has always been the main concern and a real challenge when it comes to 3D modelling of monuments, artifacts and especially sculptures. This paper implements, investigates and evaluates the results of the photogrammetric methods and 3D surveys that were used for the development of a virtual museum. Moreover, the decisions, the actions, the methodology and the main elements that this kind of application should include and take into consideration are described and analysed. It is believed that the outcomes of this application will be useful to researchers who are planning to develop and further improve the attempts made on virtual museums and mass production of 3D models.

Two-Stage Processing of Aesthetic Information in the Human Brain Revealed by Neural Adaptation Paradigm.

PubMed

Iwasaki, Miho; Noguchi, Yasuki; Kakigi, Ryusuke

2018-06-07

Some researchers in aesthetics assume visual features related to aesthetic perception (e.g. golden ratio and symmetry) commonly embedded in masterpieces. If this is true, an intriguing hypothesis is that the human brain has neural circuitry specialized for the processing of visual beauty. We presently tested this hypothesis by combining a neuroimaging technique with the repetition suppression (RS) paradigm. Subjects (non-experts in art) viewed two images of sculptures sequentially presented. Some sculptures obeyed the golden ratio (canonical images), while the golden proportion were impaired in other sculptures (deformed images). We found that the occipito-temporal cortex in the right hemisphere showed the RS when a canonical sculpture (e.g. Venus de Milo) was repeatedly presented, but not when its deformed version was repeated. Furthermore, the right parietal cortex showed the RS to the canonical proportion even when two sculptures had different identities (e.g. Venus de Milo as the first stimulus and David di Michelangelo as the second), indicating that this region encodes the golden ratio as an abstract rule shared by different sculptures. Those results suggest two separate stages of neural processing for aesthetic information (one in the occipito-temporal and another in the parietal regions) that are hierarchically arranged in the human brain.

A nudge in a healthier direction: How environmental cues help restrained eaters pursue their weight-control goal.

PubMed

Stämpfli, Aline E; Stöckli, Sabrina; Brunner, Thomas A

2017-03-01

Losing weight is a goal for many people, but it is hard to pursue. However, dieting cues in the environment hold promise for improving individuals' eating behavior. For example, exposure to thin, human-like sculptures by the artist Alberto Giacometti has been found to promote healthy snack choices at a vending machine. Whether health- or weight-related processes drive such effects has not yet been determined. However, a detailed understanding of the content-related drivers of environmental cues' effects provides the first indications regarding a cue's possible use. Therefore, two laboratory studies were conducted. They examined the Giacometti sculptures' effects on unhealthy and healthy food intake (Study 1) and on the completion of weight- and health-related fragmented words (Study 2). Study 1 indicated that the sculptures are weight-related by showing that they reduced food intake independent of food healthiness. Furthermore, the "Giacometti effect" was moderated by restrained eating. Restrained eaters, who are known for their weight-control goal, ate less after having been exposed to the thin sculptures. The results of Study 2 pointed in the same direction. Restrained eaters completed more weight-related words after being exposed to the sculptures. Overall, these studies suggest that the thin sculptures are primarily weight-related cues and particularly helpful for restrained eaters. Environmental weight-control cues such as the Giacometti sculptures could act as a counterforce to our obesogenic environment and help restrained eaters pursue their weight-control goal. In this way, they could nudge food decisions in a healthier direction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Eremobiotus ginevrae sp. nov. and Paramacrobiotus pius sp. nov., two new species of Eutardigrada.

PubMed

Lisi, Oscar; Binda, Maria Grazia; Pilato, Giovanni

2016-04-14

Two new eutardigrade species are described: Eremobiotus ginevrae sp. nov. and Paramacrobiotus pius sp. nov. The first is similar to Eremobiotus alicatai (Binda, 1969) but differs in the claw shape and dimensions. It has been found in Sicily, Israel and Russia. The second species, belonging to the richtersi group, is currently found exclusively in Sicily. It has a smooth cuticle, three macroplacoids and a microplacoid, eggs with reticulated trunco-conical processes with small terminal thorns; the egg-shell is areolated and the areolae are clearly sculptured.

Screen-Cage Ion Plating Of Silver On Polycrystalline Alumina

NASA Technical Reports Server (NTRS)

Spalvins, Talivaldis; Sliney, Harold E.; Deadmore, Daniel L.

1995-01-01

Screen-cage ion plating (SCIP) cost-effective technique offering high throwing power for deposition of adherent metal films on ceramic substrates. Applies silver films to complexly shaped substrates of polycrystalline alumina. Silver adheres tenaciously and reduces friction. SCIP holds promise for applying lubricating soft metallic films to high-temperature ceramic components of advanced combustion engines. Other potential uses include coating substrates with metal for protection against corrosion, depositing electrical conductors on dielectric substrates, making optically reflective or electrically or thermally conductive surface layers, and applying decorative metal coats to ceramic trophies or sculptures.

A New Technique for Preserving the Form of Artificially Inflated Endophalli of Bees.

PubMed

Dutra, A L; Oliveira, R

2017-04-01

We present a simple technique for keeping the form of artificially expanded endophalli in bees (Hymenoptera). Endophalli were inflated using the introduction of low melting-point agarose from a syringe inserted in the anterior opening of the metasoma. Under refrigeration, the endophalli kept their expanded shape for up to three days allowing the description of structure, morphometric analyses, and examination of the external sculpturing of the cuticle under scanning electron microscope. The technique provides new possibilities for the study of functional morphology, sexual selection, and reconstruction of bee phylogeny.

From Another World.

ERIC Educational Resources Information Center

Farris, Cynthia Cox

2002-01-01

Describes an art activity where children create imaginary character sculptures using clay. Discusses how the students created their creatures after first drawing their ideas and then painting their sculptures. (CMK)

[Achene morphology cluster analysis of Taraxacum F. H. Wigg. from northeast China and molecule systematics evidence determined by SRAP].

PubMed

Li, Hai-juan; Zhao, Xin; Jia, Qing-fei; Li, Tian-lai; Ning, Wei

2012-08-01

The achenes morphological and micro-morphological characteristics of six species of genus Taraxacum from northeastern China as well as SRAP cluster analysis were observed for their classification evidences. The achenes were observed by microscope and EPMA. Cluster analysis was given on the basis of the size, shape, cone proportion, color and surface sculpture of achenes. The Taraxacum inter-species achene shape characteristic difference is obvious, particularly spinulose distribution and size, achene color and achene size; with the Taraxacum plant achene shape the cluster method T. antungense Kitag. and the T. urbanum Kitag. should combine for the identical kind; the achene morphology cluster analysis and the SRAP tagged molecule systematics's cluster result retrieves in the table with "the Chinese flora". The class group to divide the result is consistent. Taraxacum plant achene shape characteristic stable conservative, may carry on the inter-species division and the sibship analysis according to the achene shape characteristic combination difference; the achene morphology cluster analysis as well as the SRAP tagged molecule systematics confirmation support dandelion classification result of "the Chinese flora".

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultz, Peter H.; Crawford, David A.

Rimmed grooves, lineations and elongate craters around Mare Imbrium shape much of the nearside Moon. This pattern was coined the Imbrium Sculpture 1, and it was originally argued that it must have been formed by a giant oblique (~30°) impact, a conclusion echoed by later studies 2. Some investigators, however, noticed that many elements of the Imbrium Sculpture are not radial to Imbrium, thereby implicating an endogenic or structural origin 3, 4. Here we use these non-radial trends to conclude that the Imbrium impactor was a proto-planet (half the diameter of Vesta), once part of a population of large proto-planetsmore » in the asteroid belt. Such independent constraints on the sizes of the Imbrium and other basin-forming impactors markedly increase estimates for the mass in the asteroid belt before depletion caused by the orbital migration of Jupiter and Saturn 5. Furthermore, laboratory impact experiments, shock physics codes and the groove widths indicate that multiple fragments (up to 2% of the initial diameter) from each oblique basin-forming impactor, such as the one that formed Imbrium, should have survived planetary collisions and contributed to the heavy impact bombardment between 4.3 and 3.8 billion years ago.« less

Burrowing behaviour of robotic bivalves with synthetic morphologies.

PubMed

Germann, D P; Carbajal, J P

2013-12-01

Several bivalve species burrow into sandy sediments to reach their living position. There are many hypotheses concerning the functional morphology of the bivalve shell for burrowing. Observational studies are limited and often qualitative and should be complemented by a synthetic approach mimicking the burrowing process using a robotic emulation. In this paper we present a simple mechatronic set-up to mimic the burrowing behaviour of bivalves. As environment we used water and quartz sand contained in a glass tank. Bivalve shells were mathematically modelled on the computer and then materialized using a 3D printer. The burrowing motion of the shells was induced by two external linear motors. Preliminary experiments did not expose any artefacts introduced to the burrowing process by the set-up. We tested effects of shell size, shape and surface sculpturing on the burrowing performance. Neither the typical bivalve shape nor surface sculpture did have a clear positive effect on burrowing depth in the performed experiments. We argue that the presented method is a valid and promising approach to investigate the functional morphology of bivalve shells and should be improved and extended in future studies. In contrast to the observation of living bivalves, our approach offers complete control over the parameters defining shell morphology and motion pattern. The technical set-up allows the systematic variation of all parameters to quantify their effects. The major drawback of the built set-up was that the reliability and significance of the results was limited by the lack of an optimal technique to standardize the sediment state before experiments.

13. WEST END, LOOKING NE, PHILADELPHIA ZOO LION SCULPTURE IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. WEST END, LOOKING NE, PHILADELPHIA ZOO LION SCULPTURE IN FOREGROUND. - Connecting Railway, Schuylkill River Bridge, Spanning Schuylkill River, north of Girard Avenue Bridge, Philadelphia, Philadelphia County, PA

Inspection of a Medieval Wood Sculpture Using Computer Tomography

NASA Astrophysics Data System (ADS)

Kapitany, K.; Somogyi, A.; Barsi, A.

2016-06-01

Computer tomography (CT) is an excellent technique for obtaining accurate 3D information about the human body. It allows to visualize the organs, bones and blood vessels, furthermore it enables to diagnose anomalies and diseases. Its spatial reconstruction capability supports other interesting applications, such as inspecting different, even valuable objects like ancient sculptures. Current paper presents a methodology of evaluating CT and video imagery through the example of investigating a wood Madonna with infant Jesus sculpture from the 14th century. The developed techniques extract the outer boundary of the statue, which has been triangulated to derive the surface model. The interior of the sculpture has also been revealed: the iron bolts and rivets as well as the woodworm holes can be mapped. By merging the interior and outer data (geometry and texture) interesting visualizations (perspective views, sections etc.) have been created.

Allergic contact dermatitis from sculptured acrylic nails: special presentation with an airborne pattern

PubMed Central

Maio, Paula; Carvalho, Rodrigo; Amaro, Cristina; Santos, Raquel; Cardoso, Jorge

2012-01-01

Methylmethacrylate was first reported in 1941 as a cause of contact dermatitis. Since then, occupational contact allergies to acrylates in dentistry, orthopedic surgery, printing industry and industry have been reported, but few reports are found in the literature as a consequence of the contact with sculptured artificial acrylic nails which are increasingly popular. We describe here 3 patients with contact allergy to acrylates in artificial sculptured nails. Patch tests were performed with the Portuguese baseline series of contact allergens and an extended series of acrylates were applied. In particular, we tested three female patients with allergic contact dermatitis from sculptured acrylic nails. Two of these patients were both customers and also technical nail beauticians. Two patients developed periungual eczema; one presented only with face and eyelid dermatitis had no other lesions. The tests showed positive reaction to 2-hydroxyethylmethacrylate (2-HEMA) and 2-hydroxypropylmethacrylate (2-HPMA) in all the three patients. Our cases demonstrate the variety of clinical presentations of allergic contact dermatitis from acrylic sculptured nails. They show the need to warn patients of persistent and sometimes permanent side effects of these products. They also emphasize the importance of cosmetic ingredient labeling. PMID:25386316

Detail view of basrelief sculpture in tympanum at south wall ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view of bas-relief sculpture in tympanum at south wall of east entrance loggia, with scale stick - National Zoological Park, Elephant House, 3001 Connecticut Avenue NW, Washington, District of Columbia, DC

Detail view of basrelief sculpture in tympanum at south wall ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view of bas-relief sculpture in tympanum at south wall of west entrance loggia, with scale stick - National Zoological Park, Elephant House, 3001 Connecticut Avenue NW, Washington, District of Columbia, DC

Sculpture, general view looking to the seated lions, probably from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Sculpture, general view looking to the seated lions, probably from the American Bungalow - National Park Seminary, Bounded by Capitol Beltway (I-495), Linden Lane, Woodstove Avenue, & Smith Drive, Silver Spring, Montgomery County, MD

Ferrocement Playground Sculpture.

ERIC Educational Resources Information Center

Ridenour, Marcella; Garozzo, Louis

1979-01-01

Ferrocement, a mixture of portland cement, fine sand, and wire mesh, provides an inexpensive medium for creative playground equipment. The steps involved in building a ferrocement playground sculpture are described, and a bibliography for additional information is provided. (JMF)

Palaearctic species of the Spathius exarator species group (Hymenoptera: Braconidae: Doryctinae) with entirely sculptured mesopleuron.

PubMed

Belokobylskij, Sergey A; Samartsev, Konstantin G

2014-12-24

The Palaearctic species of the S. exarator species group of the genus Spathius Nees with entirely sculptured mesopleuron are discussed. Four new species, Spathius austriacus sp. nov., S. intercontinentalis sp. nov., S. pseudodentatus sp. nov., and S. sculptipleurum sp. nov., are described and illustrated. Spathius curvicaudis Ratzeburg, 1944 treated here as junior synonym of S. erythrocephalus Wesmael, 1838 (syn. nov.) The key for determination of the Palaearctic species of this group with constantly or temporary sculptured mesopleuron is provided. 

Drop shape visualization and contact angle measurement on curved surfaces.

PubMed

Guilizzoni, Manfredo

2011-12-01

The shape and contact angles of drops on curved surfaces is experimentally investigated. Image processing, spline fitting and numerical integration are used to extract the drop contour in a number of cross-sections. The three-dimensional surfaces which describe the surface-air and drop-air interfaces can be visualized and a simple procedure to determine the equilibrium contact angle starting from measurements on curved surfaces is proposed. Contact angles on flat surfaces serve as a reference term and a procedure to measure them is proposed. Such procedure is not as accurate as the axisymmetric drop shape analysis algorithms, but it has the advantage of requiring only a side view of the drop-surface couple and no further information. It can therefore be used also for fluids with unknown surface tension and there is no need to measure the drop volume. Examples of application of the proposed techniques for distilled water drops on gemstones confirm that they can be useful for drop shape analysis and contact angle measurement on three-dimensional sculptured surfaces. Copyright © 2011 Elsevier Inc. All rights reserved.

Effects of sculpture based art therapy in dementia patients-A pilot study.

PubMed

Seifert, Kathrin; Spottke, Annika; Fliessbach, Klaus

2017-11-01

Art and art therapy open up interesting possibilities for dementia patients. However, it has not been evaluated scientifically so far, whether the art of sculpting has any benefits. In this non-randomized pilot study with twelve participants, we investigated the feasibility and acceptance of sculptural activity in patients with dementia and the effects on their well-being. A questionnaire was custom-designed to investigate five key aspects of well-being: mental state and concentration, corporeal memory, self-reliance, self-esteem and physicality. Remarkable improvements were seen in several subscales in the sculptural activity group, but not the control group: Mental state and concentration (nine of thirteen key aspects), self-reliance (four of five), self-esteem (one of one) and physicality (two of two). The results of this pilot study indicate the multidimensional effects of sculptural activity on patients living with dementia. The field would benefit greatly from further research.

Esthetic and cosmetic dermatology.

PubMed

Wollina, Uwe; Goldman, Alberto; Berger, Uwe; Abdel-Naser, Mohammed Badawy

2008-01-01

The field of esthetic and cosmetic dermatology has gained remarkable interest all over the world. The major advantage of recent years is the high scientific levels of the most significant new developments in techniques and pharmacotherapy and other nonsurgical approaches. The present paper reviews selected fields of interest under this view. Sexual hormones are involved in the aging process of men and women. Skin function, in particular the epidermal barrier, is affected by a loss of endocrine activity. Hormone replacement therapy has only recently been introduced in treatment of aging males. This is an area of gender-medicine in dermatology with a strong well-aging attempt. Botulinum toxin therapy for hyperfunctional lines has become not only well-established but evidence-based medicine on its highest level. Recent advantages were gained in objective evaluation and monitoring the effect. Digital imaging techniques with various facets have been introduced to assess the achievements of treatment in the most objective way. This may become an example for other techniques as peeling, laser therapy, or radiofrequency in esthetic and cosmetic dermatology. Botulinum toxin has become a valuable tool for brow lifts. Details of the technique are discussed. Cellulite is a strongly female gender-related condition. During the past decades numerous treatments had been recommended but only recently a more critical scientific approach led to improvements in therapy of this common and disfiguring condition. Three major approaches are developed: (a) skin loosing with techniques such as subcision, (b) skin tightening with radiofrequency and other approaches, and (c) improving circulation in blood and lymphatic microvasculature using both physical treatments and pharmacotherapy. The last two chapters are devoted to body sculpturing by lipotransfer and lipolysis. Lipotransfer for facial or body sculpturing has a history of about 100 years. Nevertheless, recently the role of adult stem cells in adipose tissue has gained much interest. By optimizing the harvesting, storage, and transplantation of adipose tissue, remarkable long-standing results have been obtained. Here the present authors will focus on midface contouring, where lipotransfer competes with dermal fillers. Lipolysis is another effective tool in body sculpturing. The present authors will focus on recent advances in laser-assisted lipolysis for delicate body sculpturing in the submental region but also for gynecomastia abdominal region, flanks, and hips. In conclusion, esthetic and cosmetic dermatology has become a scientific-based subspeciality of dermatology with evidence-based treatments and a great variety of high-tech approaches to provide more effective, more selective, and safer therapeutic options.

Analysis of sculptures using XRF and X-ray radiography

NASA Astrophysics Data System (ADS)

Calza, C.; Oliveira, D. F.; Freitas, R. P.; Rocha, H. S.; Nascimento, J. R.; Lopes, R. T.

2015-11-01

This work reports the analysis of two sacred images on polychrome wood using X-ray Radiography and Energy Dispersive X-Ray Fluorescence. The first case is the analysis of a sculpture portraying Saint Sebastian, the patron saint of Rio de Janeiro, which is considered the second most ancient sacred image of Brazil. This sculpture was made in Portugal and was transported to Brazil by Estácio Sá, founder of the city of Rio de Janeiro, in 1565. Nowadays, it is located on the main altar of the Church of Capuchin Friars. The second case is the analysis of a sculpture representing Our Lady of Conception, which is located in the D. João VI Museum (EBA/UFRJ, Rio de Janeiro). The objective of these analyses was to evaluate the general conditions of the sculptures, identifying possible problems and internal damages, areas that revealed signs of previous retouchings and the materials and pigments employed by the artists, in order to assist its restoration procedures. EDXRF measurements were carried out with a portable system, developed at the Nuclear Instrumentation Laboratory, consisting of a Si-PIN XR-100CR detector from Amptek and an Oxford TF3005 X-ray tube with W anode. An X-ray source, a CR System GE CR50P and IP detectors were used to perform the radiographs. The XRF analysis of the sculptures identified the original pigments in both cases and the radiographic images revealed details of the manufacture; restored regions; extensive use of lead white; presence of cracks on the wood; use of nails and spikes, etc.

Sculpture, cast iron lamps at northeast corner of Stephen Sitter ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Sculpture, cast iron lamps at northeast corner of Stephen Sitter Avenue and Forney road, with scale - National Park Seminary, Bounded by Capitol Beltway (I-495), Linden Lane, Woodstove Avenue, & Smith Drive, Silver Spring, Montgomery County, MD

Sky Sculpture.

ERIC Educational Resources Information Center

Woody, Howard

1980-01-01

Described is a five-day workshop in the new environmental art form of sky sculpture, which was presented at Wingfield High School in Jackson, Mississippi. Included are daily activities and the design considerations faced by students when planning their balloon creations for flight. (SJL)

Aluminum and Young Artists.

ERIC Educational Resources Information Center

Anderson, Thomas

1980-01-01

The author suggests a variety of ways in which aluminum and aluminum foil can be used in elementary and junior high art classes: relief drawing and rubbing; printing; repousse; sculpture; mobiles; foil sculpture; and three dimensional design. Sources of aluminum supplies are suggested. (SJL)

Sculpture, perspective view looking to pair of lions positioned at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Sculpture, perspective view looking to pair of lions positioned at top of stairs leading down into the Glen - National Park Seminary, Bounded by Capitol Beltway (I-495), Linden Lane, Woodstove Avenue, & Smith Drive, Silver Spring, Montgomery County, MD

Sculpture, detail view of cast iron lamps, with scale (note: ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Sculpture, detail view of cast iron lamps, with scale (note: "'J.L. Mott, Ironworks, NY" stamp on the base) - National Park Seminary, Bounded by Capitol Beltway (I-495), Linden Lane, Woodstove Avenue, & Smith Drive, Silver Spring, Montgomery County, MD

Specificity of Esthetic Experience for Artworks: An fMRI Study

PubMed Central

Di Dio, Cinzia; Canessa, Nicola; Cappa, Stefano F.; Rizzolatti, Giacomo

2011-01-01

In a previous functional magnetic resonance imaging (fMRI) study, where we investigated the neural correlates of esthetic experience, we found that observing canonical sculptures, relative to sculptures whose proportions had been modified, produced the activation of a network that included the lateral occipital gyrus, precuneus, prefrontal areas, and, most interestingly, the right anterior insula. We interpreted this latter activation as the neural signature underpinning hedonic response during esthetic experience. With the aim of exploring whether this specific hedonic response is also present during the observation of non-art biological stimuli, in the present fMRI study we compared the activations associated with viewing masterpieces of classical sculpture with those produced by the observation of pictures of young athletes. The two stimulus-categories were matched on various factors, including body postures, proportion, and expressed dynamism. The stimuli were presented in two conditions: observation and esthetic judgment. The two stimulus-categories produced a rather similar global activation pattern. Direct comparisons between sculpture and real-body images revealed, however, relevant differences, among which the activation of right antero-dorsal insula during sculptures viewing only. Along with our previous data, this finding suggests that the hedonic state associated with activation of right dorsal anterior insula underpins esthetic experience for artworks. PMID:22121344

Homer: The Blind Bard

ERIC Educational Resources Information Center

Doorley, Rachelle; King, Judith

2005-01-01

This article describes notable cultural, historical, and artistic elements emanating from sculptures originating in ancient Greece. The "blind bard" and its connection to the legendary Greek poet, Homer; Homer's impact on literary history; trends among Roman sculptures; and Roman replication of Greek art are described. Questions to…

Sculpture, standing Lion, with scale (note: not in original location, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Sculpture, standing Lion, with scale (note: not in original location, now placed at the south side of Building No. 188) - National Park Seminary, Bounded by Capitol Beltway (I-495), Linden Lane, Woodstove Avenue, & Smith Drive, Silver Spring, Montgomery County, MD

28. THE UNICORN LADY, PHOTOGRAPH OF SCULPTURE NOW LOCATED JUST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. THE UNICORN LADY, PHOTOGRAPH OF SCULPTURE NOW LOCATED JUST NORTH OF THE MUSIC ROOM, DUMBARTON OAKS MANSION; FORMERLY LOCATED WITHIN THE PARK, NEAR THE ANIMAL CEMETERY 1990 - Dumbarton Oaks Park, Thirty-second & R Streets Northwest, Washington, District of Columbia, DC

Cone Heads

ERIC Educational Resources Information Center

Coy, Mary

2005-01-01

The author, a middle school art teacher, describes a sculpture project lesson involving Cone Heads (sculptures made from cardboard cones). Discussion of caricatures with exaggerated facial features and interesting profiles helped students understand that the more expressive the face, the better. This project took approximately four to five…

Using Soft Sculpture Microfossils and Other Crafted Models to Teach Geoscience

NASA Astrophysics Data System (ADS)

Spinak, N. R.

2017-12-01

For the past 5 years, the International Ocean Discovery Program (IODP) has been using the author's sewn models of microfossils to help learners understand the shapes and design of these tiny fossils. These tactile objects make the study of ancient underwater life more tangible. Multiple studies have shown that interactive models can help many learners understand science. The Montessori and Waldorf education programs are based in large part on earlier insights into meeting these needs. The act of drawing has been an essential part of medical education. The STEAM (Science, Technology, Engineering, Arts and Math) movement has advocated for STEM supporters to recognize the inseparability of science and art. This presentation describes how the author's knitted or sewn models of microfossils incorporate art and design into geoscience education. The geoscience research and art processes used in developing and creating these educational soft sculptures will be described. In multiple entry points to science study, specific reciprocal benefits to boundary crossing among the arts and sciences for those who have primary talents in a particular area of study will be discussed. Geoscience education can benefit from using art and craft items such as models. Many websites now offer soft sculptures for biology study such as organs and germs (e.g. (https://www.giantmicrobes.com/us/main/nasty-germs). The Wortheim project involving community and crochet is another approach (http://crochetcoralreef.org/). These tactile artifacts give learners an entry-level experience with biology. Three dimensional models are multisensory. The enlarged manipulative microfossil models invite learners to make comparisons and gain insights when microscopes are not available or appropriate for the audience. Adding the physical involvement of creating a microfossil yourself increases the multi-sensory experience even further. Learning craft skills extends the cross-cutting concepts of the NGSS to a mutual relationship between science and art.

Instructional Resources: Issues in Public Sculpture.

ERIC Educational Resources Information Center

Hill, Julie Lasater; And Others

1988-01-01

Presents four lesson plans for teaching K-12 students about public sculpture and contemporary sculptors. Highlights the following works: "Playscapes" by Isamu Noguchi, "The Dallas Piece" by Henry Moore, "Old Glory" by Mark di Suvero, and "Face of the Earth" by Vito Acconci. Includes background information on…

3. SOUTH ELEVATION OF SECURITY GATE. SAPLING SCULPTURES ON EITHER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. SOUTH ELEVATION OF SECURITY GATE. SAPLING SCULPTURES ON EITHER SIDE OF GATE WERE ADDED BY A LOCAL ARTIST IN AUGUST 1998. - Loring Air Force Base, Alert Area, Southeastern portion of base, east of southern end of runway, Limestone, Aroostook County, ME

Sculpture Sketches in Bloom

ERIC Educational Resources Information Center

DiJulio, Betsy

2009-01-01

The best artistic challenges open students' eyes, hearts, and minds by combining both formal and conceptual concerns. In this article, the author describes a project inspired by a temporary exhibition of African Shona sculpture entitled "Mutambo! (Celebrate!)" at the Norfolk Botanical Gardens in Norfolk, Virginia. (Contains 2 online…

Art Experiences for Young Children with Severe Visual Imapairments: Report from the Field.

ERIC Educational Resources Information Center

Swenson, Anna M.

1987-01-01

Ten guidelines are offered for providing art experiences for blind young children include adding sound, smell, or taste whenever possible. Suggested activities include making styrofoam-toothpick sculptures, box sculptures, tape and feather collages, torn paper collages, and fingerpaintings. (DB)

Atomic Oxygen Cleaning of Unpainted Plaster Sculptures

NASA Technical Reports Server (NTRS)

Banks, Bruce A.; Miller, Sharon K.

2017-01-01

Atomic oxygen erosion of polymers has been found to be a threat to spacecraft in low Earth orbit. As a result ground facilities have been developed to identify coatings to protect polymers such as used for solar array blankets. As a result of extensive laboratory testing, it was discovered that soot and other organic contamination on paintings could be readily removed by atomic oxygen interactions with minimal damage to the artwork. No method, other than dusting, has been found to be effective in the cleaning of unpainted plaster sculptures This presentation discusses the atomic oxygen interaction processes and how effective they are for cleaning soot damaged unpainted plaster sculptures.

Digital 3D facial reconstruction of George Washington

NASA Astrophysics Data System (ADS)

Razdan, Anshuman; Schwartz, Jeff; Tocheri, Mathew; Hansford, Dianne

2006-02-01

PRISM is a focal point of interdisciplinary research in geometric modeling, computer graphics and visualization at Arizona State University. Many projects in the last ten years have involved laser scanning, geometric modeling and feature extraction from such data as archaeological vessels, bones, human faces, etc. This paper gives a brief overview of a recently completed project on the 3D reconstruction of George Washington (GW). The project brought together forensic anthropologists, digital artists and computer scientists in the 3D digital reconstruction of GW at 57, 45 and 19 including detailed heads and bodies. Although many other scanning projects such as the Michelangelo project have successfully captured fine details via laser scanning, our project took it a step further, i.e. to predict what that individual (in the sculpture) might have looked like both in later and earlier years, specifically the process to account for reverse aging. Our base data was GWs face mask at Morgan Library and Hudons bust of GW at Mount Vernon, both done when GW was 53. Additionally, we scanned the statue at the Capitol in Richmond, VA; various dentures, and other items. Other measurements came from clothing and even portraits of GW. The digital GWs were then milled in high density foam for a studio to complete the work. These will be unveiled at the opening of the new education center at Mt Vernon in fall 2006.

Taking Another Look: Sensuous, Consistent Form.

ERIC Educational Resources Information Center

Townley, Mary Ross

1983-01-01

There is a natural progression from making single objects to creating sculpture. By modeling the forms of objects like funnels and light bulbs, students become aware of the quality of curves and the edges of angles. Sculptural form in architecture can be understood as consistency in the forms. (CS)

The Educational Worth of Zimbabwean Stone Sculpture.

ERIC Educational Resources Information Center

Moyo, Daniel

A study analyzed the worth of one traditional craft, Zimbabwean stone sculpture, in terms of its educational and employment values. The study was prompted by general attitudes that tend to equate "good" education with education that is modeled on Western industrial technology, whereas traditional education, which includes crafts…

Treasured Texas Theaters

ERIC Educational Resources Information Center

Horton, Anita

2012-01-01

Dallas artist Jon Flaming's deep love of Texas is evident in his paintings and sculpture. Although he has created one sculptural Texas theater, his work primarily showcases old Texas barbershops, vacant homes, and gas stations. In this article, the author describes how her students, inspired by Flaming's works, created three-dimensional historical…

Transformation & Metamorphosis

ERIC Educational Resources Information Center

Lott, Debra

2009-01-01

The sculptures of Canadian artist Brian Jungen are a great inspiration for a lesson on creating new forms. Jungen transforms found objects into unique creations without fully concealing their original form or purpose. Frank Stella's sculpture series, including "K.132,2007" made of stainless steel and spray paint, is another great example of…

75 FR 66419 - Culturally Significant Objects Imported for Exhibition Determinations: “Object of Devotion...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-28

... DEPARTMENT OF STATE [Public Notice 7217] Culturally Significant Objects Imported for Exhibition Determinations: ``Object of Devotion: Medieval English Alabaster Sculpture From the Victoria and Albert Museum... Devotion: Medieval English Alabaster Sculpture from the Victoria and Albert Museum,'' imported from abroad...

A Concrete Mainstreaming Experience: Cementing Relations through Art.

ERIC Educational Resources Information Center

Heller, Jeffry

1983-01-01

Two artists skilled in creating concrete sculpture worked with special and regular education elementary students in planning and building a concrete sculpture of a jungle. The shared experience not only resulted in a functional piece of art but also in improved staff and student relations. (CL)

A Methodological Study of Family Cohesion and Adaptability.

ERIC Educational Resources Information Center

Russell, Candyce S.

1980-01-01

Assessed the validity of four separate instruments: SIMFAM; an adaptation of the Bowerman and Bahr Identification Scale; the Moos Family Environment Scale; and the Kvebaek Family Sculpture Test. Data support the Family Sculpture Test as a useful tool for measuring family cohesion but not adaptability. (Author)

Corrigendum to "Co-occurrence of linear and circular dichroism in chiral sculptured ZrO2 thin films" [Opt. Mater. 75 (January 2018) 319-324

NASA Astrophysics Data System (ADS)

Muhammad, Zahir; Wali, Faiz; Song, Li

2018-05-01

The authors regret .

Life-Size Sculptural Heads: A Lesson in Three-Dimensional Design.

ERIC Educational Resources Information Center

Gamble, Harriet

2003-01-01

Presents a lesson in which students created three-dimensional self-portraits, using papier-mache, clay, and plaster, designed to develop their modeling skills as they learn about art history. Discusses how the students created their sculptures, offering detailed directions on creating the three-dimensional heads. (CMK)

In the Style of Henry Moore

ERIC Educational Resources Information Center

Hinshaw, Craig

2010-01-01

In this article, the author describes an art project inspired by Henry Moore's sculptures. This project consists of two activities. In the first activity, students select, sand and stain a wood block that would become a base for their plaster sculpture. This activity would keep the students independently engaged (classroom management) while the…

Linking Sculpture to Core Subjects.

ERIC Educational Resources Information Center

Khilnani, Sharda; Culhane, Douglas

1995-01-01

This article describes a cooperative project between a teacher and sculptor to link sculpture with academic subjects within a self-contained class for 13-year-old students with learning disabilities. The nine-week project focused on biological habitats and included the construction of three-dimensional habitats on pieces of wood. (DB)

Sculpture: Creative Designs with Modern Materials (Tentative Course Outline).

ERIC Educational Resources Information Center

Dubocq, Edward R.

This document reports on a course in comprehension and application of various techniques of sculpture and collage, using a contemporary point of view. Students will work with contemporary materials such as wood, metals, plaster, plastics, styrofoam, and many other cardboard basic materials suitable for creative design products. This unit will…

75 FR 3272 - Culturally Significant Objects Imported for Exhibition Determinations: “The Sacred Made Real...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-20

... DEPARTMENT OF STATE [Public Notice 6876] Culturally Significant Objects Imported for Exhibition Determinations: ``The Sacred Made Real: Spanish Painting and Sculpture 1600-1700'' SUMMARY: Notice is hereby... objects to be included in the exhibition ``The Sacred Made Real: Spanish Painting and Sculpture 1600-1700...

Oaxacan Folk-Art Animals

ERIC Educational Resources Information Center

Fortune, Tracy

2010-01-01

In this article, the author describes a papier-mache unit inspired by whimsical animal sculptures created by artisans from the Oaxaca (pronounced Wah-Haw-Ka) region in southern Mexico. While the actual Mexican sculptures are carved from wood, the papier-mache medium is easier to work with and requires fewer tools. Most middle schoolers love…

The Eco-Sculpture Assignment: Using Art to Scaffold Metacognition

ERIC Educational Resources Information Center

Polegato, Rosemary

2014-01-01

The Eco-Sculpture Assignment demonstrates that art may be used as a conduit to scaffold metacognition in marketing courses. Theoretical underpinnings are drawn from the literature on pedagogy used in general, marketing, and art education contexts. The assignment is described in detail, followed by examples of learner response that illustrate…

Investigation of FPGA-Based Real-Time Adaptive Digital Pulse Shaping for High-Count-Rate Applications

NASA Astrophysics Data System (ADS)

Saxena, Shefali; Hawari, Ayman I.

2017-07-01

Digital signal processing techniques have been widely used in radiation spectrometry to provide improved stability and performance with compact physical size over the traditional analog signal processing. In this paper, field-programmable gate array (FPGA)-based adaptive digital pulse shaping techniques are investigated for real-time signal processing. National Instruments (NI) NI 5761 14-bit, 250-MS/s adaptor module is used for digitizing high-purity germanium (HPGe) detector's preamplifier pulses. Digital pulse processing algorithms are implemented on the NI PXIe-7975R reconfigurable FPGA (Kintex-7) using the LabVIEW FPGA module. Based on the time separation between successive input pulses, the adaptive shaping algorithm selects the optimum shaping parameters (rise time and flattop time of trapezoid-shaping filter) for each incoming signal. A digital Sallen-Key low-pass filter is implemented to enhance signal-to-noise ratio and reduce baseline drifting in trapezoid shaping. A recursive trapezoid-shaping filter algorithm is employed for pole-zero compensation of exponentially decayed (with two-decay constants) preamplifier pulses of an HPGe detector. It allows extraction of pulse height information at the beginning of each pulse, thereby reducing the pulse pileup and increasing throughput. The algorithms for RC-CR2 timing filter, baseline restoration, pile-up rejection, and pulse height determination are digitally implemented for radiation spectroscopy. Traditionally, at high-count-rate conditions, a shorter shaping time is preferred to achieve high throughput, which deteriorates energy resolution. In this paper, experimental results are presented for varying count-rate and pulse shaping conditions. Using adaptive shaping, increased throughput is accepted while preserving the energy resolution observed using the longer shaping times.

Food that Fools the Eye

ERIC Educational Resources Information Center

Serre, Camille M.

2009-01-01

Toilet-paper food sculpture is an integral part of the art curriculum at Silver Creek Middle School in Sellersburg, Indiana. The author describes techniques on how to create realistic food sculptures using toilet paper, water, and tempera paint. Students of all ages and skill levels enjoy this project because everyone relates to food and a sense…

Ode to Moore

ERIC Educational Resources Information Center

Wilbert, Nancy Corrigan

2011-01-01

Best known for his monumental abstract sculptures of reclining figures, Henry Moore's forms are generally pierced or have a hollow space within them. Some say that these "organic undulating forms" are reminiscent of the landscape of his home in Yorkshire, England. Moore was a giant in the world of sculpture and his large cast bronzes and marble…

The Pinch Pot Technique and Raku.

ERIC Educational Resources Information Center

Demery, Marie

Since the 16th century, the small Japanese raku tea bowl has reflected the merged cultural influences of art, religion, and other countries on the art of Japanese pottery. Artistically, the bowl is a combination of ceramics (pinching) and sculpture (carving). The dictates of the Zen Buddhist tea masters determine its sculptural process and steps,…

Sculpture, view looking to pair of lions, positioned at top ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Sculpture, view looking to pair of lions, positioned at top of stairs leading down into the Glen from DeWitt Circle, just north of the American Bungalow (note: Windmill in background) - National Park Seminary, Bounded by Capitol Beltway (I-495), Linden Lane, Woodstove Avenue, & Smith Drive, Silver Spring, Montgomery County, MD

The Book as a Sculptural Object

ERIC Educational Resources Information Center

Wagner, Thomas

2004-01-01

Although the craft and art of bookmaking has a rich history, artworks about books are relatively new. The author teaches in a school that has an international population where a variety of languages and cultures flourish. He took this opportunity to develop a ceramic unit that combined sculptural design, the history of bookmaking, and traditional…

Joys and Mysteries: An Interview with Debra W. Fritts.

ERIC Educational Resources Information Center

Gamble, Harriet

2002-01-01

Presents an interview with Debra W. Fritts, a ceramic artist who created handbuilt terra-cotta sculptures. Focuses on topics, such as her childhood, her beginning interests in art, her teaching, her growth as an artist, and the techniques she uses when creating her sculptures. Includes directions for a rattle project. (CMK)

Sculptural Ideas with Sketches and Maquettes. Teaching Art with Art.

ERIC Educational Resources Information Center

Hubbard, Guy

2000-01-01

Discusses the use of sketches and maquettes (idea models usually made of clay) as a preparatory method for a final artwork. Suggests ways to teach students about the importance of planning an artwork. Discusses the sketches and maquettes of sculptural pieces by Henry Moore, Constantin Brancusi, and Antoine Pevsner. (CMK)

Archaeometric characterization and provenance determination of sculptures and architectural elements from Gerasa, Jordan

NASA Astrophysics Data System (ADS)

Al-Bashaireh, Khaled

2018-02-01

This study aims at the identification of the provenance of white marble sculptures and architectural elements uncovered from the archaeological site of Gerasa and neighboring areas, north Jordan. Most of the marbles are probably of the Roman or Byzantine periods. Optical microscopy, X-ray diffraction, and mass spectrometry were used to investigate petrographic, mineralogical and isotopic characteristics of the samples, respectively. Analytical results were compared with the main reference databases of known Mediterranean marble quarries exploited in antiquity. The collected data show that the most likely main sources of the sculptures were the Greek marble quarries of Paros-2 (Lakkoi), Penteli (Mount Pentelikon, Attica), and Thasos-3 (Thasos Island, Cape Vathy, Aliki); the Asia Minor marble quarries of Proconessus-1 (Marmara) and Aphrodisias (Aphrodisias); and the Italian quarry of Carrara (Apuan Alps). Similarly, the Asia Minor quarries of the fine-grained Docimium (Afyon) and the coarse-grained Proconessus-1 (Marmara) and Thasos-3 are the most likely sources of the architectural elements. The results agree with published data on the wide use of these marbles for sculpture and architectural elements.

Graphical User Interface in Art

NASA Astrophysics Data System (ADS)

Gwilt, Ian

This essay discusses the use of the Graphical User Interface (GUI) as a site of creative practice. By creatively repositioning the GUI as a work of art it is possible to challenge our understanding and expectations of the conventional computer interface wherein the icons and navigational architecture of the GUI no longer function as a technological tool. These artistic recontextualizations are often used to question our engagement with technology and to highlight the pivotal place that the domestic computer has taken in our everyday social, cultural and (increasingly), creative domains. Through these works the media specificity of the screen-based GUI can broken by dramatic changes in scale, form and configuration. This can be seen through the work of new media artists who have re-imagined the GUI in a number of creative forms both, within the digital, as image, animation, net and interactive art, and in the analogue, as print, painting, sculpture, installation and performative event. Furthermore as a creative work, the GUI can also be utilized as a visual way-finder to explore the relationship between the dynamic potentials of the digital and the concretized qualities of the material artifact.

Enlargement and sculpturing of a small and deformed glans.

PubMed

Perovic, Savra; Radojicic, Zoran I; Djordjevic, Miroslav Lj; Vukadinovic, Vojkan V

2003-10-01

We present 2 techniques of enhancement and sculpturing of a small and/or deformed glans. The small glans in primary or re-do hypospadias repair was enhanced by longitudinal double-faced island flaps incorporated onto the ventral side of the glans between the glans wings. The deformed glans, of small or normal size (with normal urethra or well functioning neourethra), was enlarged and sculptured by injection of hydrogel. Between May 1997 and March 2002, 27 patients underwent glans enhancement and sculpturing. Small deformed glans occurred after failed hypospadias repair in 10 patients, penile trauma in 3, hemangioma sclerozation in 2, primary hypospadias in 8 and normally developed penile body in 4. A double-faced island flap was performed in 14 patients, glans was enhanced by hydrogel injection in 9 and both procedures were performed in 4. Mean followup was 34 months for the double-faced flap technique 17 months for hydrogel injection. Satisfactory enlargement and esthetic appearance were achieved in 13 of the 14 patients who underwent the double-faced flap technique and 1 required surgical correction. Of the 9 patients who underwent either single or multistage hydrogel injection 8 had good results and 1 required partial removal of hydrogel after hypercorrection. The combination of these 2 techniques provided satisfactory results in all 4 cases. Enlargement and sculpturing of a small deformed glans are challenging and difficult. A double-faced island flap and/or injection of hydrogel resolves this problem satisfactorily.

DOSAGE DES ELEMENTS EN TRACE DES CALCAIRES AU SERVICE DE L'ARCHEOLOGIE

DOE Office of Scientific and Technical Information (OSTI.GOV)

BLANC,A.; HOLMES,L.; HARBOTTLE,G.

1998-05-01

Numerous quarries in the Lutetian limestone formations of the Paris Basin provided stone for the building and the decoration of monuments from antiquity to the present. To determine the origin of stone used for masonry and sculptures in these monuments, a team of geologists and archaeologists has investigated 300 quarries and collected 2,300 samples. Petrographic and paleontologic examination of thin sections allows geologists to distinguish Lutetian limestones from Jurassic and Cretaceous limestones. Geologists also seek to formulate hypotheses regarding the origin of Lutetian limestones used for building and sculpture in the Paris region. In the search for the sources ofmore » building and sculptural stone, the analytical methods of geologists are limited because often several quarries produce the same lithofacies. A new tool is now available, however, to attack questions of provenance raised by art historians. Because limestones from different sources have distinctive patterns of trace-element concentrations, compositional analysis by neutron activation allows them to compare building or sculptural stone from one monument with stone from quarries or other monuments. This analytical method subjects a powdered limestone sample to standard neutron activation analysis procedures at Brookhaven National Laboratory. With the help of computer programs, the compositional fingerprints of Lutetian limestones can be determined and stored in a database. The limestone database contains data for approximately 2,100 samples from monuments, sculptures and quarries. It is particularly rich in samples from the Paris Basin.« less

The Golden Beauty: Brain Response to Classical and Renaissance Sculptures

PubMed Central

Di Dio, Cinzia; Macaluso, Emiliano; Rizzolatti, Giacomo

2007-01-01

Is there an objective, biological basis for the experience of beauty in art? Or is aesthetic experience entirely subjective? Using fMRI technique, we addressed this question by presenting viewers, naïve to art criticism, with images of masterpieces of Classical and Renaissance sculpture. Employing proportion as the independent variable, we produced two sets of stimuli: one composed of images of original sculptures; the other of a modified version of the same images. The stimuli were presented in three conditions: observation, aesthetic judgment, and proportion judgment. In the observation condition, the viewers were required to observe the images with the same mind-set as if they were in a museum. In the other two conditions they were required to give an aesthetic or proportion judgment on the same images. Two types of analyses were carried out: one which contrasted brain response to the canonical and the modified sculptures, and one which contrasted beautiful vs. ugly sculptures as judged by each volunteer. The most striking result was that the observation of original sculptures, relative to the modified ones, produced activation of the right insula as well as of some lateral and medial cortical areas (lateral occipital gyrus, precuneus and prefrontal areas). The activation of the insula was particularly strong during the observation condition. Most interestingly, when volunteers were required to give an overt aesthetic judgment, the images judged as beautiful selectively activated the right amygdala, relative to those judged as ugly. We conclude that, in observers naïve to art criticism, the sense of beauty is mediated by two non-mutually exclusive processes: one based on a joint activation of sets of cortical neurons, triggered by parameters intrinsic to the stimuli, and the insula (objective beauty); the other based on the activation of the amygdala, driven by one's own emotional experiences (subjective beauty). PMID:18030335

108th Convention of the American Psychological Association. Washington, DC, August 4-8, 2000

PubMed

2000-04-01

Washington, DC--the nation's capital--celebrates a history rich in diversity and character. One of the most popular cities for sightseeing, Washington contains countless points of interest for its visitors. The world's largest museum complex, the Smithsonian Institution, invites you to explore exhibits that highlight the scientific, cultural, political, and technological developments of the United States and its people. Visit the home to original pieces of the American heritage, such as the Declaration of Independence, the Constitution, and the Bill of Rights, that have helped to shape the way we live today. The art lovers among you will delight in the seven major art galleries. See the modern art and sculpture of the Hirshhorn Museum and the newly opened Sculpture Garden; the Sackler Gallery's collection of Asian art; and the only museum devoted to the art and culture of Africa, the National Museum of African Art. In Washington, there is music in the air, from the Kennedy Center's many stages and the clubs of Georgetown and Adams Morgan to the military bands that give concerts on the Mall. Whatever your culinary desire, be it authentic Texas chili or the finest Asian cuisine, you'll find it at one of the city's internationally famous eateries. What a perfect place for APA to convene its first annual convention of the new millennium!

Tardigrades from Peru (South America), with descriptions of three new species of Parachela.

PubMed

Kaczmarek, Lukasz; Cytan, Joanna; Zawierucha, Krzysztof; Diduszko, Dawid; Michalczyk, Lukasz

2014-04-17

In four samples of mosses and mosses mixed with lichens collected in the Peruvian region of Cusco, 344 tardigrades, 78 free-laid eggs and six simplexes were found. In total, nine species were identified: Cornechiniscus lobatus, Echiniscus dariae, E. ollantaytamboensis, Isohypsibius condorcanquii sp. nov., Macrobiotus pisacensis sp. nov., Milnesium krzysztofi, Minibiotus intermedius, Paramacrobiotus intii sp. nov. and Pseudechiniscus ramazzottii ramazzottii. Isohypsibius condorcanquii sp. nov. is most similar to I. baldii, but differs mainly by the absence of ventral sculpture, the presence of the oral cavity armature, a different macroplacoid length sequence and a different shape of macroplacoids. The new species also differs from other congeners by a different dorsal sculpture, the absence of cuticular bars under the claws and the absence of eyes. Macrobiotus pisacensis sp. nov. differs from the most similar M. ariekammensis and M. kirghizicus by a different oral cavity armature, the presence of cuticular pores, details of egg morphology and some morphometric characters of both animals and eggs. Paramacrobiotus intii sp. nov. differs from most similar species of the genus by a different type of the oral cavity armature, details of egg morphology and some morphometric characters of both animals and eggs. In addition, we briefly discuss the tardigrade fauna of Peru, and propose a simple and economic system of describing relative lengths of pharyngeal macroplacoids. The system is especially useful in interspecific comparisons and differential diagnoses.

Complex photonic lattices embedded with tailored intrinsic defects by a dynamically reconfigurable single step interferometric approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xavier, Jolly, E-mail: jolly.xavierp@physics.iitd.ac.in; Joseph, Joby, E-mail: joby@physics.iitd.ac.in

2014-02-24

We report sculptured diverse photonic lattices simultaneously embedded with intrinsic defects of tunable type, number, shape as well as position by a single-step dynamically reconfigurable fabrication approach based on a programmable phase spatial light modulator-assisted interference lithography. The presented results on controlled formation of intrinsic defects in periodic as well as transversely quasicrystallographic lattices, irrespective and independent of their designed lattice geometry, portray the flexibility and versatility of the approach. The defect-formation in photonic lattices is also experimentally analyzed. Further, we also demonstrate the feasibility of fabrication of such defects-embedded photonic lattices in a photoresist, aiming concrete integrated photonic applications.

Plaster Casts after Antique Sculpture: Their Role in the Elevation of Public Taste and in American Art Instruction.

ERIC Educational Resources Information Center

McNutt, James K.

1990-01-01

Examines the social, ideological, and cultural forces in colonial United States when plaster casts of Grecian and Roman sculpture were introduced. Describes how they were used in U.S. public schools and art museums to transmit the cultural heritage at the end of the nineteenth century. (KM)

What a Relief: Using Paper Relief Sculpture to Teach Topographic Map Skills

ERIC Educational Resources Information Center

Price, Kelly

2005-01-01

While the struggle persists in science classes to help students visualize in three dimensions, art classes are creating unique sculptures out of paper that produce three-dimensional displays from two-dimensional resources. The translation of paper relief sculpting from the art classroom to the science classroom adds dimension to the teaching of…

Separateness Representations in a Sculpting Task: Revealing Maternal Subjective Experience

ERIC Educational Resources Information Center

Bat Or, Michal

2015-01-01

This study explored mothers' separateness representations via a clay sculpting task assigned to 24 mothers of preschool children aged 21 months to 4 years. Each participant created a clay sculpture of herself and her child, followed by a semi-structured interview about the sculpting experience and the meaning of the sculpture. Qualitative analyses…

From Postmodernism to Milk Cartons: Junk Art Sculptures and Pre-Service Teachers' Philosophies of Schooling

ERIC Educational Resources Information Center

McDermott, Morna

2008-01-01

This essay focuses of an arts-informed inquiry performed by sixteen pre-service teachers who created sculptures to explore their teaching philosophies. Through this creative process changes occurred in their assumptions and expectations about what is of value in teaching and relationships between themselves, their students, and the community. The…

Chronologies in wood and resin: AMS 14C dating of pre-Hispanic Caribbean Wood Sculpture

Treesearch

Joanna Ostapkowicz; Christopher Bronk-Ramsey; Fiona Brock; Tom Higham; Alex C. Wiedenhoeft; Erika Ribechini; Jeannette J. Lucejko; Samuel Wilson

2012-01-01

This paper establishes a chronological framework for selected pieces of Caribbean (Tafno/Lucayan) wooden sculpture, enabling previously ahistoric artefacts to fit back into the wider corpus of pre-colonial material culture. Seventy-two 14C AMS determinations from 56 artefacts held in museum collections are reported, including 32 ceremonial

Study of Italian Renaissance sculptures using an external beam nuclear microprobe

NASA Astrophysics Data System (ADS)

Zucchiatti, A.; Bouquillon, A.; Moignard, B.; Salomon, J.; Gaborit, J. R.

2000-03-01

The use of an extracted proton micro-beam for the PIXE analysis of glazes is discussed in the context of the growing interest in the creation of an analytical database on Italian Renaissance glazed terracotta sculptures. Some results concerning the frieze of an altarpiece of the Louvre museum, featuring white angels and cherubs heads, are presented.

American Sculpture and the Library of Congress

ERIC Educational Resources Information Center

Somma, Thomas P.

2010-01-01

The Thomas Jefferson Building of the Library of Congress is one of the more significant public structures in American architecture, due for the most part to its wealth and quality of decoration, including an extensive sculptural program executed in 1894-97. The architects entrusted the program to a committee of three prominent sculptors, J. Q. A.…

The Joy of Creating Virtual Mathematical Sculptures.

ERIC Educational Resources Information Center

Chuan, Jen-chung

The process of turning symbols into a mathematical sculpture has never been easier. A copy of Maple V release five and a Web browser configured with a VRML plug-in such as the Cosmo Player is necessary to do these activities. Maple V furnishes the computing environment with the capability of allowing for concentration on the mathematical…

Thin-section microscopy of decayed crystalline marble from the garden sculptures of Schoenbrunn Palace in Vienna

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, J.; Beseler, S.; Sterflinger, K.

2007-11-15

Sterzing marble, a crystalline white marble used in the late-Baroque garden sculptures of Schoenbrunn Palace in Vienna, was studied by means of thin-section and scanning electron microscopy in order to obtain a better understanding of its surface decay caused by atmospheric weathering. Following the classification of distinct phenomena of deterioration by visual on-site inspection, the microstructural features including surface erosion, micro-cracking, soiling, black crust formation, and microbiological infestation are exemplified by microscopical images and are briefly discussed. The results proved useful for evaluating and understanding the various types of marble decay for creating a safer basis for establishing the proceduralmore » principles aimed at conservation and maintenance of the sculptures.« less

Fun with Falling Man

ERIC Educational Resources Information Center

Mosley, Clay R.

2009-01-01

A shiny human figure turned into a car or a jet--what kid (or kid at heart) wouldn't enjoy these images? The author found that showing his students these shiny human sculptures by artist Ernest Trova (1927-2009) was a great place to start an exciting sculpture project with his fourth-grade students. In the 1960s, Ernest Trova created a painting of…

Dress Fashion in Feminist and Child Rights Campaigns in Ghanaian Public Sculptures of the 1990s

ERIC Educational Resources Information Center

Essel, Osuanyi Quaicoo; Opoku-Mensah, Isaac

2017-01-01

This article examines how dress fashion in outdoor sculptures of the 1990s in the Accra cityscape accentuated feminist activism, sensitised child right campaigns, and encouraged girl-child education in support of governmental efforts and activism of civil society organisations in Ghana. It gives attention to how dress fashion of the time was used…

Photographer: NASA Ames On 20 December 1989, Ames buried a time capsule and unveiled a sculpture at

NASA Technical Reports Server (NTRS)

1989-01-01

Photographer: NASA Ames On 20 December 1989, Ames buried a time capsule and unveiled a sculpture at the spot where, fifty years earlier, Russel Robinson had turned the first spade of dirt for the Ames construction shack: Robinson (left) Ames Director Dale Compton (center) and Ames Deputy Director Sy Syvertson (right)

"Lesbians are not women": feminine and lesbian sensibilities in Harmony Hammond's late-1970s sculpture.

PubMed

Thompson, Margo Hobbs

2008-01-01

Harmony Hammond's wrapped fabric sculptures are placed in context of the theories of gender and sexuality that circulated among lesbian and straight feminists at the time they were made, the late 1970s. Hammond has cited in particular Monique Wittig's novels, such as The Lesbian Body, and her essays including "The Straight Mind" where Wittig concludes that the lesbian is not a woman. The critique to which Wittig's lesbian separatism has been subjected by Judith Butler in her consideration of the appeal and limitations of essentialism also applies to Hammond's art. Hammond's use of vaginal imagery was instrumental to visualizing a lesbian sensibility, but the proposition of such a sensibility established a new problematic: a new essential category. The article concludes that because Hammond's work was produced in the context of a complex set of discourses, lesbian, feminist, and aesthetic, it resisted reduction to a singular meaning. Her sculptures avoided the pitfall of substituting one essence for another, lesbian for feminine sensibility, but activated both. The sculptures effectively queered vaginal imagery: When Hammond used vaginal imagery to represent lesbian sensibility, she subverted the equation of sex and gender and the essentialist notion of feminine sensibility.

Petrographic characterization and provenance determination of the white marbles used in the Roman sculptures of Forum Sempronii (Fossombrone, Marche, Italy)

NASA Astrophysics Data System (ADS)

Antonelli, Fabrizio; Columbu, Stefano; Lezzerini, Marco; Miriello, Domenico

2014-06-01

The Roman municipium of Forum Sempronii (Fossombrone, Marche) was located along the `Via Consolare Flaminia', in the stretch of road where it ran along the final sector of the valley of the River Metauro ( Mataurus). The ancient colony of Forum Sempronii, which is cited by Strabo, Pliny, and Ptolemy, was found in the second century BC, probably on the site of an earlier community and its activity continued until the end of the fifth century AD. During ancient and more recent archaeological excavations, many fragments of coloured stones and marbles, and some white marble sculptures have been unearthed. In this paper, we report the results of the provenance identification of the white marbles used for the sculptures found in the archaeological site of Forum Sempronii and now displayed at the local archaeological museum. The determination of the source origin of the white marbles used for the sculptures has been established by mineralogical-petrographic and geochemical analyses. Microscopic study of thin sections together with carbon and oxygen stable isotope ratios indicate that more than one type of white marbles was used: Pentelikon, Lunense, and Thasian.

The Sculptured Hills of the Taurus Highlands: Implications for the relative age of Serenitatis, basin chronologies and the cratering history of the Moon

USGS Publications Warehouse

Spudis, P.D.; Wilhelms, D.E.; Robinson, M.S.

2011-01-01

New images from the Lunar Reconnaissance Orbiter Camera show the distribution and geological relations of the Sculptured Hills, a geological unit widespread in the highlands between the Serenitatis and Crisium basins. The Sculptured Hills shows knobby, undulating, radially textured, and plains-like morphologies and in many places is indistinguishable from the similarly knobby Alpes Formation, a facies of ejecta from the Imbrium basin. The new LROC image data show that the Sculptured Hills in the Taurus highlands is Imbrium ejecta and not directly related to the formation of the Serenitatis basin. This occurrence and the geological relations of this unit suggests that the Apollo 17 impact melts may not be not samples of the Serenitatis basin-forming impact, leaving their provenance undetermined and origin unexplained. If the Apollo 17 melt rocks are Serenitatis impact melt, up to half of the basin and large crater population of the Moon was created within a 30 Ma interval around 3.8 Ga in a global impact "cataclysm." Either interpretation significantly changes our view of the impact process and history of the Earth-Moon system. Copyright 2011 by the American Geophysical Union.

Characterization of three types of silicon solar cells for SEPS Deep Space Mission. Volume 3: Current-voltage characteristics of spectrolab sculptured BSR/P+ (K7), BSR/P+ (K6.5) and BSR (K4.5) cells as a function of temperature and intensity

NASA Technical Reports Server (NTRS)

Whitaker, A. F.; Little, S. A.; Wooden, V. A.; Carter, D. E.; Cothren, B. E.; Torstenson, C. A.

1980-01-01

Three types of high performance silicon solar cells, sculptured BSR/P+(K7), BSR/P+(K6.5) and BSR(K4.5) manufactured by Spectrolab were evaluated for their low temperature and low intensity performance. Sixteen cells of each type were subjected to 11 temperatures and 9 intensities. The sculptured BSR/P+(K7) cells provided the greatest maximum power output both at 1 AU and at LTLI conditions. The average efficiencies of this cell were 14.4 percent at 1 SC/+25 deg C and 18.5 percent at 0.086 SC/-100 deg C.

The Lateral Occipital Complex shows no net response to object familiarity.

PubMed

Margalit, Eshed; Shah, Manan P; Tjan, Bosco S; Biederman, Irving; Keller, Brenton; Brenner, Rorry

2016-09-01

In 1995, Malach et al. discovered an area whose fMRI BOLD response was greater when viewing intact, familiar objects than when viewing their scrambled versions (resembling texture). Since then hundreds of studies have explored this late visual region termed the Lateral Occipital Complex (LOC), which is now known to be critical for shape perception (James, Culham, Humphrey, Milner, & Goodale, 2003). Malach et al. (1995) discounted a role of familiarity by showing that "abstract" Henry Moore sculptures, unfamiliar to the subjects, also activated this region. This characterization of LOC as a region that responds to shape independently of familiarity has been accepted but never tested with control of the same low-level features. We assessed LOC's response to objects that had identical parts in two different arrangements, one familiar and the other novel. Malach was correct: There is no net effect of familiarity in LOC. However, a multivoxel correlation analysis showed that LOC does distinguish familiar from novel objects.

Health hazard evaluation report HETA 90-048-2253, Haute Nails, Norman, Oklahoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almaguer, D.; Blade, L.M.

In response to a request from the owner/operator of the Haute Nails Salon, Norman, Oklahoma, an evaluation was undertaken of possible chemical exposures from the use of nail sculpturing products. Haute Nails was an artificial nail sculpturing and tanning salon employing two full time nail sculpturers and four part time receptionists. The company was located on the first floor of a two story brick building. Long term general area air sampling was conducted for volatile organic chemicals, formaldehyde, and methacrylates; personal breathing zone air sampling was conducted for methacrylates. Ethyl-methacrylate concentrations in long term samples ranged from 10.3 to 14.1more » mg/cu m. Breathing zone concentrations of ethyl-methacrylate were 128 mg/cu m for a 7 minute sample and 78.9 mg/cu m for a 14 minute sample during nail sculpturing. Carbon-dioxide measurements exceeded the recommended level of 1000 parts per million. The authors conclude that there were no overexposures to ethyl-methylacrylate during the evaluation. The heating and air conditioning system did not provide for the mechanical exchange of outside air and no exhaust fans were located in the area served by the system. The authors recommend that an outside air supply duct be added to the present system.« less

14. LION SCULPTURE, AT THE PHILADELPHIA MUSEUM OF ART, MOVED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. LION SCULPTURE, AT THE PHILADELPHIA MUSEUM OF ART, MOVED FROM MERCHANTS' EXCHANGE, WHERE IT RESTED ON THE STAIR WALL OF SIDE ENTRANCE STAIRS. (A REPLACEMENT LION HAS BEEN PLACED IN THE ORIGINAL SITE, AS DID ANOTHER REPLACEMENT IN THE OTHER SIDE OF THE BUILDING. FOR THIS LATTER REPLACEMENT SEE PA-1028-15). A VIEW OF THE MUSEUM IS IN THE BACKGROUND - Philadelphia Exchange Company, 143 South Third Street, Philadelphia, Philadelphia County, PA

a Target Aware Texture Mapping for Sculpture Heritage Modeling

NASA Astrophysics Data System (ADS)

Yang, C.; Zhang, F.; Huang, X.; Li, D.; Zhu, Y.

2017-08-01

In this paper, we proposed a target aware image to model registration method using silhouette as the matching clues. The target sculpture object in natural environment can be automatically detected from image with complex background with assistant of 3D geometric data. Then the silhouette can be automatically extracted and applied in image to model matching. Due to the user don't need to deliberately draw target area, the time consumption for precisely image to model matching operation can be greatly reduced. To enhance the function of this method, we also improved the silhouette matching algorithm to support conditional silhouette matching. Two experiments using a stone lion sculpture of Ming Dynasty and a potable relic in museum are given to evaluate the method we proposed. The method we proposed in this paper is extended and developed into a mature software applied in many culture heritage documentation projects.

High Rise Building: The Mega Sculpture Made Of Steel, Concrete and Glass

NASA Astrophysics Data System (ADS)

Stefańska, Alicja; Załuski, Daniel

2017-10-01

High rise building has transformed from providing not only the expansion of floor space but functioning as mega sculpture in the city. The shift away from economic efficiency driven need is only expected to grow in the future. Based on literature studies; after analysing planning documents and case studies, it was examined whether the presumption that gaining the maximum amount of usable area is the only driving factor; or if the need for the creation of an image for the city provided a supplementary reason. The results showed that forming high rise buildings as three-dimensional sculptures is influenced not only by aesthetics, but also marketing. Visual distinction in the city skyline is economically beneficial for investors gaining not only functionality but art, enriching the cultural landscape. Organizing architectural competitions, public debates and following the latest art trends is therefore possible due to large budgets of such projects.

[Obesity in sculptures of the paleolithic era].

PubMed

Józsa, László

2008-12-07

In this paper I present 100 neolithic figurines (97 female and 3 male) made of ivory, mammuth bone, limestone and other substances. The sculptures were found on the Eurasian continent, from the Pirenees to Lake Baikal and the river Amur. More than half (57.3%) of the idols show various types of female obesity. However, they are named ironically "Venus"-es. The figurines are described and speculation underlying the reason for such depictions and their uses are presented.

Dwarfism in art.

PubMed

Limon, Janusz

2015-01-01

Throughout the history of mankind the birth of a child with congenital malformation raised anxiety and torment, along with attempts to explain its origins. It is possible to find relics of such events in prehistoric rock drawings and primitive sculptures, in numerous art pieces produced through the centuries up to modern sculptures, paintings and drawings. The aim of the present article is to show how dwarfs were portrayed in a variety of art forms at different moments in the history of our world.

Air pollutant intrusion into the Wieliczka Salt Mine

USGS Publications Warehouse

Salmon, L.G.; Cass, G.R.; Kozlowski, R.; Hejda, A.; Spiker, E. C.; Bates, A.L.

1996-01-01

The Wieliczka Salt Mine World Cultural Heritage Site contains many rock salt sculptures that are threatened by water vapor condensation from the mine ventilation air. Gaseous and particulate air pollutant concentrations have been measured both outdoors and within the Wieliczka Salt Mine, along with pollutant deposition fluxes to surfaces within the mine. One purpose of these measurements was to determine whether or not low deliquescence point ionic materials (e.g., NH4NO3) are accumulating on surfaces to an extent that would exacerbate the water vapor condensation problems in the mine. It was found that pollutant gases including SO2 and HNO3 present in outdoor air are removed rapidly and almost completely from the air within the mine by deposition to surfaces. Sulfur isotope analyses confirm the accumulation of air pollutant-derived sulfur in liquid dripping from surfaces within the mine. Particle deposition onto interior surfaces in the mine is apparent, with resulting soiling of some of those sculptures that have been carved from translucent rock salt. Water accumulation by salt sculpture surfaces was studied both experimentally and by approximate thermodynamic calculations. Both approaches suggest that the pollutant deposits on the sculpture surfaces lower the relative humidity (RH) at which a substantial amount of liquid water will accumulate by 1% to several percent. The extraordinarily low SO2 concentrations within the mine may explain the apparent success of a respiratory sanatorium located deep within the mine.

The microbial community characteristics of ancient painted sculptures in Maijishan Grottoes, China

PubMed Central

He, Dongpeng; Gu, Ji-Dong; Feng, Huyuan; Chen, Tuo; Liu, Guangxiu; An, Lizhe

2017-01-01

In this study, a culture-independent Illumina MiSeq sequencing strategy was applied to investigate the microbial communities colonizing the ancient painted sculptures of the Maijishan Grottoes, a famous World Cultural Heritage site listed by UNESCO in China. Four mixed samples were collected from Cave 4–4 of the Maijishan Grottoes, the so-called Upper Seven Buddha Pavilion, which was built during the Northern Zhou Dynasty (557-581AD). The 16/18S rRNA gene-based sequences revealed a rich bacterial diversity and a relatively low fungal abundance, including the bacterial groups Actinobacteria, Acidobacteria, Bacteroidetes, Cyanobacteria, Chloroflexi, Firmicutes, Proteobacteria and Verrucomicrobia and the fungal groups Ascomycota, Basidiomycota and Chytridiomycota. Among them, the bacteria genera of Pseudonocardia and Rubrobacter and unclassified fungi in the order of Capnodiales were dominant. The relative abundance of Pseudonocardia in the painted layer samples was higher than that in the dust sample, while Cyanobacteria dominated in the dust sample. Many of them have been discovered at other cultural heritage sites and associated with the biodeterioration of cultural relics. The presence and activity of these pioneering microorganisms may lead to an unexpected deterioration of the painted sculptures that are preserved in this heritage site. Thus, proper management strategies and potential risk monitoring should be used in the Maijishan Grottoes to improve the conservation of these precious painted sculptures. PMID:28678844

Communication media and the dead: from the Stone Age to Facebook.

PubMed

Walter, Tony

2015-07-03

This article argues as follows: (i) The presence of the dead within a society depends in part on available communication technologies, specifically speech, stone, sculpture, writing, printing, photography and phonography (including the mass media), and most recently the internet. (ii) Each communication technology affords possibilities for the dead to construct and legitimate particular social groups and institutions - from the oral construction of kinship, to the megalithic legitimation of the territorial rights of chiefdoms, to the written word's construction of world religions and nations, to the photographic and phonographic construction of celebrity-based neo-tribalism, and to the digital reconstruction of family and friendship. (iii) Historically, concerns about the dead have on a number of occasions aided the development of new communication technologies - the causal connection between the two can go both ways. The argument is based primarily on critical synthesis of existing research literature.

Communication media and the dead: from the Stone Age to Facebook

PubMed Central

Walter, Tony

2015-01-01

Abstract This article argues as follows: (i) The presence of the dead within a society depends in part on available communication technologies, specifically speech, stone, sculpture, writing, printing, photography and phonography (including the mass media), and most recently the internet. (ii) Each communication technology affords possibilities for the dead to construct and legitimate particular social groups and institutions – from the oral construction of kinship, to the megalithic legitimation of the territorial rights of chiefdoms, to the written word’s construction of world religions and nations, to the photographic and phonographic construction of celebrity-based neo-tribalism, and to the digital reconstruction of family and friendship. (iii) Historically, concerns about the dead have on a number of occasions aided the development of new communication technologies – the causal connection between the two can go both ways. The argument is based primarily on critical synthesis of existing research literature. PMID:26549977

Cartography of irregularly shaped satellites

NASA Technical Reports Server (NTRS)

Batson, R. M.; Edwards, Kathleen

1987-01-01

Irregularly shaped satellites, such as Phobos and Amalthea, do not lend themselves to mapping by conventional methods because mathematical projections of their surfaces fail to convey an accurate visual impression of the landforms, and because large and irregular scale changes make their features difficult to measure on maps. A digital mapping technique has therefore been developed by which maps are compiled from digital topographic and spacecraft image files. The digital file is geometrically transformed as desired for human viewing, either on video screens or on hard copy. Digital files of this kind consist of digital images superimposed on another digital file representing the three-dimensional form of a body.

Facial rejuvenation starts in the midface: three-dimensional volumetric facial rejuvenation has beneficial effects on nontreated neighboring esthetic units.

PubMed

Wollina, Uwe

2016-03-01

Facial aging is a major indication for minimal invasive esthetic procedures. Dermal fillers are a cornerstone in the approach for facial sculpturing. But where to start? Our concept is midfacial volume restoration in first place. This will result in a healthy and youthful appearance creating a facial V-shape. But midfacial filler injection does not only improve the malar area. It has also beneficial effects on neighboring esthetic units. We report on such improvements in periocular and nasolabial region, upper lips and perioral tissue, and the jaw line and discuss anatomical background. We hypothesize that midfacial deep filler injections also may activate subdermal white adipose tissue stem cells contributing to longer lasting rejuvenation. © 2015 Wiley Periodicals, Inc.

Automated CAD design for sculptured airfoil surfaces

NASA Astrophysics Data System (ADS)

Murphy, S. D.; Yeagley, S. R.

1990-11-01

The design of tightly tolerated sculptured surfaces such as those for airfoils requires a significant design effort in order to machine the tools to create these surfaces. Because of the quantity of numerical data required to describe the airfoil surfaces, a CAD approach is required. Although this approach will result in productivity gains, much larger gains can be achieved by automating the design process. This paper discusses an application which resulted in an eightfold improvement in productivity by automating the design process on the CAD system.

Treasures ... of black wood, brilliantly polished : five examples of Taino sculpture from the tenth-sixteenth century Caribbean.

Treesearch

Joanna Ostapkowicz; Alex Wiedenhoeft; Christopher Bronk Ramsey; Erika Ribechini; Samuel Wilson; Fiona Brock; Tom Higham

2011-01-01

Five wooden sculptures from the pre-contact Caribbean, long held in museum collections, are here dated and given a context for the first time. The examples studied were made from dense Guaiacum wood, carved, polished and inlaid with shell fastened with resin. Dating the heartwood, sapwood and resins takes key examples of ‘Classic’ Ta´ýno art back to the tenth century...

Manhattan Solar Cannon

NASA Astrophysics Data System (ADS)

Treffers, Richard R.; Loisos, George; Ubbelohde, Susan; Douglas, Susanna; Pintos, Eduardo; Mulherin, James; Pasley, David

2015-01-01

We describe a 2.4 m hexagonal solar collector atop a Manhattan office building used for a solar / arts project. The collector uses an afocal design to concentrate the sunlight into a 0.6 m diameter beam which is directed by mirrors into a 80 m long fiber optic sculpture which descends an interior stairwell. The collector is fully steerable and follows the sun each day robotically. The control system and the optical design of the collector as well as the fiber optic sculpture will be discussed.

PIXE and /μ-PIXE analysis of glazes from terracotta sculptures of the della Robbia workshop

NASA Astrophysics Data System (ADS)

Zucchiatti, Alessandro; Bouquillon, Anne; Giancarlo Lanterna; Lucarelli, Franco; Mandò, Pier Andrea; Prati, Paolo; Salomon, Joseph; Vaccari, Maria Grazia

2002-04-01

A series of PIXE analyses has been performed on glazes from terracotta sculptures of the Italian Renaissance and on reference standards. The problems related to the investigation of such heterogeneous materials are discussed and the experimental uncertainties are evaluated, for each element, from the PIXE analysis of standard glasses. Some examples from artefacts coming from Italian collections are given. This research has been conducted in the framework of the COST-G1 European action.

Effect of magneto rheological damper on tool vibration during hard turning

NASA Astrophysics Data System (ADS)

Paul, P. Sam; Varadarajan, A. S.

2012-12-01

Recently, the concept of hard turning has gained considerable attention in metal cutting as it can apparently replace the traditional process cycle of turning, heat treating, and finish grinding for assembly of hard wear resistant steel parts. The present investigation aims at developing a magneto rheological (MR) fluid damper for suppressing tool vibration and promoting better cutting performance during hard turning. The magneto rheological Fluid acts as a viscoelastic spring with non-linear vibration characteristics that are controlled by the composition of the magneto rheological fluid, the shape of the plunger and the electric parameters of the magnetizing field. Cutting experiments were conducted to arrive at a set of electrical, compositional and shape parameters that can suppress tool vibration and promote better cutting performance during turning of AISI 4340 steel of 46 HRC with minimal fluid application using hard metal insert with sculptured rake face. It was observed that the use of MR fluid damper reduces tool vibration and improves the cutting performance effectively. Also commercialization of this idea holds promise to the metal cutting industry.

Obsidianus lapis rugosity and hardness determination: fibre laser craftsmanship

NASA Astrophysics Data System (ADS)

Aguilar-Morales, A. I.; Velazquez-Gonzalez, J. S.; Marrujo-García, S.; Reyes-Sanchez, J. I.; Alvarez-Chávez, J. A.

2014-05-01

Obsidianus lapis is a volcanic rock that has been worked into tools for cutting or weaponry by Teotihuacan people for hundreds of years. Currently it is used in jewelry or for house decorative items such as elaborated sculptures. From the physico-chemical properties point of view, obsidianus lapis is considered a glass as its composition is 80% silicon dioxide. In México there are different kinds of obsidianus lapis according to its colour: rainbow, black, brown, red, silver, golden and snowflake. The traditional grinding process for working with obsidianus lapis includes fixed grinders and sandpaper for the polishing process, where the craftsman grinds the rock manually obtaining a variety of shapes. Laser processing of natural stones is a relatively new topic. We propose the use of an Yb3+-doped fibre laser for cutting and ablating obsidianus lapis into spherical, rectangular and oval shapes. By means of a theoretical analysis of roughness and hardness, which affect the different surfaces and final shapes, and considering the changes in material temperature during laser interaction, this work will focus on parameter determination such as: laser fluence, incidence angle, laser average power and peak pulse energy, from the proposed Q-switched fibre laser design. Full optical, hardness and rugosity, initial and final, characterization will be included in the presentation.

Buddha from space - An ancient object of art made of a Chinga iron meteorite fragment

NASA Astrophysics Data System (ADS)

Buchner, Elmar; Schmieder, Martin; Kurat, Gero; Brandstńtter, Franz; Kramar, Utz; Ntaflos, Theo; Kröchert, Jörg

2012-09-01

The fall of meteorites has been interpreted as divine messages by multitudinous cultures since prehistoric times, and meteorites are still adored as heavenly bodies. Stony meteorites were used to carve birds and other works of art; jewelry and knifes were produced of meteoritic iron for instance by the Inuit society. We here present an approximately 10.6 kg Buddhist sculpture (the “iron man”) made of an iron meteorite, which represents a particularity in religious art and meteorite science. The specific contents of the crucial main (Fe, Ni, Co) and trace (Cr, Ga, Ge) elements indicate an ataxitic iron meteorite with high Ni contents (approximately 16 wt%) and Co (approximately 0.6 wt%) that was used to produce the artifact. In addition, the platinum group elements (PGEs), as well as the internal PGE ratios, exhibit a meteoritic signature. The geochemical data of the meteorite generally match the element values known from fragments of the Chinga ataxite (ungrouped iron) meteorite strewn field discovered in 1913. The provenance of the meteorite as well as of the piece of art strongly points to the border region of eastern Siberia and Mongolia, accordingly. The sculpture possibly portrays the Buddhist god Vaiśravana and might originate in the Bon culture of the eleventh century. However, the ethnological and art historical details of the “iron man” sculpture, as well as the timing of the sculpturing, currently remain speculative.

Digital pulse processing and electronic noise analysis for improving energy resolutions in planar TlBr detectors

NASA Astrophysics Data System (ADS)

Tada, Tsutomu; Hitomi, Keitaro; Tanaka, Tomonobu; Wu, Yan; Kim, Seong-Yun; Yamazaki, Hiromichi; Ishii, Keizo

2011-05-01

Digital pulse processing and electronic noise analysis are proposed for improving energy resolution in planar thallium bromide (TlBr) detectors. An energy resolution of 5.8% FWHM at 662 keV was obtained from a 0.5 mm thick planar TlBr detector at room temperature using a digitizer with a sampling rate of 100 MS/s and 8 bit resolution. The electronic noise in the detector-preamplifier system was measured as a function of pulse shaping time in order to investigate the optimum shaping time for the detector. The depth of interaction (DOI) in TlBr detectors for incident gamma-rays was determined by taking the ratio of pulse heights for fast-shaped to slow-shaped signals. FWHM energy resolution of the detector was improved from 5.8% to 4.2% by implementing depth correction and by using the obtained optimum shaping time.

Milnesium berladnicorum sp. n. (Eutardigrada, Apochela, Milnesiidae), a new species of water bear from Romania.

PubMed

Ciobanu, Daniel Adrian; Zawierucha, Krzysztof; Moglan, Ioan; Kaczmarek, Lukasz

2014-01-01

In a lichen sample collected from a tree in Bârlad town (Vaslui County, Romania), a new tardigrade species belonging to the genus Milnesium (granulatum group) was found. Milnesium berladnicorum sp. n. is most similar (in the type of dorsal sculpture) to Milnesium beasleyi Kaczmarek et al., 2012 but differs from it mainly by having a different claw configuration and some morphometric characters. Additionally, the new species differs from other congeners of the granulatum group by the different type of dorsal sculpture, claw configuration and some morphometric characters.

Symmetry and scale orient Min protein patterns in shaped bacterial sculptures

NASA Astrophysics Data System (ADS)

Wu, Fabai; van Schie, Bas G. C.; Keymer, Juan E.; Dekker, Cees

2015-08-01

The boundary of a cell defines the shape and scale of its subcellular organization. However, the effects of the cell's spatial boundaries as well as the geometry sensing and scale adaptation of intracellular molecular networks remain largely unexplored. Here, we show that living bacterial cells can be ‘sculpted’ into defined shapes, such as squares and rectangles, which are used to explore the spatial adaptation of Min proteins that oscillate pole-to-pole in rod-shaped Escherichia coli to assist cell division. In a wide geometric parameter space, ranging from 2 × 1 × 1 to 11 × 6 × 1 μm3, Min proteins exhibit versatile oscillation patterns, sustaining rotational, longitudinal, diagonal, stripe and even transversal modes. These patterns are found to directly capture the symmetry and scale of the cell boundary, and the Min concentration gradients scale with the cell size within a characteristic length range of 3-6 μm. Numerical simulations reveal that local microscopic Turing kinetics of Min proteins can yield global symmetry selection, gradient scaling and an adaptive range, when and only when facilitated by the three-dimensional confinement of the cell boundary. These findings cannot be explained by previous geometry-sensing models based on the longest distance, membrane area or curvature, and reveal that spatial boundaries can facilitate simple molecular interactions to result in far more versatile functions than previously understood.

The combination of digital surface scanners and cone beam computed tomography technology for guided implant surgery using 3Shape implant studio software: a case history report.

PubMed

Lanis, Alejandro; Álvarez Del Canto, Orlando

2015-01-01

The incorporation of virtual engineering into dentistry and the digitization of information are providing new perspectives and innovative alternatives for dental treatment modalities. The use of digital surface scanners with surgical planning software allows for the combination of the radiographic, prosthetic, surgical, and laboratory fields under a common virtual scenario, permitting complete digital treatment planning. In this article, the authors present a clinical case in which a guided implant surgery was performed based on a complete digital surgical plan combining the information from a cone beam computed tomography scan and the virtual simulation obtained from the 3Shape TRIOS intraoral surface scanner. The information was imported to and combined in the 3Shape Implant Studio software for guided implant surgery planning. A surgical guide was obtained by a 3D printer, and the surgical procedure was done using the Biohorizons Guided Surgery Kit and its protocol.

The fabrication and hydrophobic property of micro-nano patterned surface on magnesium alloy using combined sparking sculpture and etching route

NASA Astrophysics Data System (ADS)

Wu, Yunfeng; Wang, Yaming; Liu, Hao; Liu, Yan; Guo, Lixin; Jia, Dechang; Ouyang, Jiahu; Zhou, Yu

2016-12-01

Magnesium alloy with micro-nano structure roughness surface, can serve as the loading reservoirs of medicine capsule and industrial lubricating oil, or mimic 'lotus leaf' hydrophobic surface, having the potential applications in medical implants, automobile, aerospace and electronic products, etc. Herein, we propose a novel strategy to design a micro-nano structure roughness surface on magnesium alloy using combined microarc sparking sculpture and etching in CrO3 aqueous solution. A hydrophobic surface (as an applied example) was further fabricated by chemical decorating on the obtained patterned magnesium alloy surface to enhance the corrosion resistance. The results show that the combined micro-nano structure of 7-9 μm diameter big pores insetting with nano-scale fine pores was duplicated after etched the sparking sculptured 'over growth' oxide regions towards the magnesium substrate. The micro-nano structure surface was chemically decorated using AgNO3 and stearic acid, which enables the contact angle increased from 60° to 146.8°. The increasing contact angle is mainly attributed to the micro-nano structure and the chemical composition. The hydrophobic surface of magnesium alloy improved the corrosion potential from -1.521 V of the bare magnesium to -1.274 V. Generally, the sparking sculpture and then etching route demonstrates a low-cost, high-efficacy method to fabricate a micro-nano structure hydrophobic surface on magnesium alloy. Furthermore, our research on the creating of micro-nano structure roughness surface and the hydrophobic treatment can be easily extended to the other metal materials.

Ecology and identification of environmental fungi and metabolic processes involved in the biodeterioration of Brazilian soapstone historical monuments.

PubMed

Boniek, D; de Castro Mendes, I; Paiva, C A O; de Paula Lana, U G; Dos Santos, A F B; de Resende Stoianoff, M A

2017-11-01

This study aimed to evaluate the action of organic acids produced by the fungal population associated with the biodeterioration process of the Twelve Prophets of Aleijadinho, a set of soapstone sculptures in Congonhas, state of Minas Gerais, Brazil. For this, samples of fungi were obtained from the surface of each of the 12 outdoor stone sculptures that comprise the set of Prophets. The identification of the colonizing filamentous fungi was performed by classical microbiology and molecular methods. Some species of filamentous fungi-dependent cultivation were detected, and the presence of species Aspergillus versicolor, Curvularia lunata, Epicoccum nigrum, Penicillium citrinum and Pseudocercospora norchiensis indicated a connection with the excretion of organic acids. The acids produced by each of these fungal species were analysed quantitatively by chromatographic methods, revealing potential biodeterioration by the action of acidic metabolites excreted in the stone. Minas Gerais, Brazil, is vulnerable to the activities of mineral extraction industries, posing an imminent risk to United Nations Educational, Scientific and Cultural Organization (UNESCO) recognized cities, e.g. Congonhas. Many of these municipalities hold many soapstone religious sculptures and historical monuments. Consequently, soapstone is susceptible to filamentous fungi attack causing irreversible biodeterioration. Despite the concern related to nondestructive sampling of 18th century sculptures, in this study, we have discussed the factors that lead to biodeterioration of soapstone due to organic acid excretion by the fungi that damage the stone, thereby providing an insight in conserving and preserving the soapstone monuments. © 2017 The Society for Applied Microbiology.

Virtues of Giambologna from Grimaldi Chapel Archaeometric Characterisation Part II: `Artistic' and Natural Patinas

NASA Astrophysics Data System (ADS)

Bongiorno, Valeria; Grosso, Pamela; Piccardo, Paolo; Magnani, Lauro G.; Carnasciali, Maria M.

2016-08-01

The scientific investigation on metal artwork is meant to expand the knowledge regarding the technical skills developed by artists in sculpture manufacturing. Moreover, all the gathered data support the speculation about the motivations behind the choices of certain material or a specific casting and/or finishing method (e.g., aesthetic, economic or technical reasons, or both) and give fundamental information for planning adequate restoration interventions. The subject of this study is the Virtues sculptural group made at the end of the XVI century by Giambologna to decorate the Grimaldi Chapel in the church of San Francesco di Castelletto (Genoa, Italy). Six life-size statues depicting Charity, Justice, Hope, Fortitude, Faith, and Temperance (i.e., the artwork discussed in this article); seven bas-reliefs; and six winged representations of putti are what remains of the original monumental project. Different micro-invasive analytical techniques (scanning electron microscopy and energy dispersive x-ray spectroscopy, SEM-EDS; micro-Raman Spectroscopy, μRS; gas chromatography-mass spectrometry, GC-MS) were applied to determine the chemical nature and the state of conservation of the "artistic" and natural patinas visible on the Virtues surfaces. Some patination tests were performed taking into account the collected analytical data and the indications provided by the scientific literature and the historical documents. The combination of the results obtained through the scientific investigations and the experimental work allowed for supposing the materials and the patination technique selected by the artist to adorn the sculptures and providing indications for the correct conservation of the six sculptures.

XRF, μ-XRD and μ-spectroscopic techniques for revealing the composition and structure of paint layers on polychrome sculptures after multiple restorations.

PubMed

Franquelo, M L; Duran, A; Castaing, J; Arquillo, D; Perez-Rodriguez, J L

2012-01-30

This paper presents the novel application of recently developed analytical techniques to the study of paint layers on sculptures that have been restored/repainted several times across centuries. Analyses were performed using portable XRF, μ-XRD and μ-Raman instruments. Other techniques, such as optical microscopy, SEM-EDX and μ-FTIR, were also used. Pigments and other materials including vermilion, minium, red lac, ivory black, lead white, barium white, zinc white (zincite), titanium white (rutile and anatase), lithopone, gold and brass were detected. Pigments from both ancient and modern times were found due to the different restorations/repaintings carried out. μ-Raman was very useful to characterise some pigments that were difficult to determine by μ-XRD. In some cases, pigments identification was only possible by combining results from the different analytical techniques used in this work. This work is the first article devoted to the study of sculpture cross-section samples using laboratory-made μ-XRD systems. Copyright © 2011 Elsevier B.V. All rights reserved.

Fabrication of TEOS/PDMS/F127 hybrid coating materials for conservation of historic stone sculptures

NASA Astrophysics Data System (ADS)

Liu, Yurong; Liu, Jia

2016-08-01

The present work was aimed to develop a new kind of stone conservation materials (TEOS/PDMS/F127 hybrid coating) by a facile sol-gel method for the protection of decayed sandstones of Chongqing Dazu stone sculptures in China. The hydrophobic property, surface morphology, water vapor permeability, ultraviolet aging resistance and mechanical properties were measured to evaluate the effectiveness of TEOS/PDMS/F127 hybrid coating as a stone conservation material. The results showed that the addition of hydroxyl-terminated polydimethylsiloxane (PDMS-OH) contributed to improve the hydrophobic properties and incorporation of PEO-PPO-PEO (F127) surfactant resulted in the formation of superficial protrusions with micro- and nanoscopic structures and overall alteration of surface morphology and roughness, thus preventing the coating materials from cracking. After treatment with TEOS/PDMS/F127 hybrid coating materials, the ultraviolet aging resistance and mechanical properties of stone were also improved without the obvious effects on the breathability and color of the stone, indicating promising applications of TEOS/PDMS/F127 hybrid coating materials for conservation of historic stone sculptures.

Pursuing Mirror Image Reconstruction in Unilateral Microtia: Customizing Auricular Framework by Application of Three-Dimensional Imaging and Three-Dimensional Printing.

PubMed

Chen, Hsin-Yu; Ng, Li-Shia; Chang, Chun-Shin; Lu, Ting-Chen; Chen, Ning-Hung; Chen, Zung-Chung

2017-06-01

Advances in three-dimensional imaging and three-dimensional printing technology have expanded the frontier of presurgical design for microtia reconstruction from two-dimensional curved lines to three-dimensional perspectives. This study presents an algorithm for combining three-dimensional surface imaging, computer-assisted design, and three-dimensional printing to create patient-specific auricular frameworks in unilateral microtia reconstruction. Between January of 2015 and January of 2016, six patients with unilateral microtia were enrolled. The average age of the patients was 7.6 years. A three-dimensional image of the patient's head was captured by 3dMDcranial, and virtual sculpture carried out using Geomagic Freeform software and a Touch X Haptic device for fabrication of the auricular template. Each template was tailored according to the patient's unique auricular morphology. The final construct was mirrored onto the defective side and printed out with biocompatible acrylic material. During the surgery, the prefabricated customized template served as a three-dimensional guide for surgical simulation and sculpture of the MEDPOR framework. Average follow-up was 10.3 months. Symmetric and good aesthetic results with regard to auricular shape, projection, and orientation were obtained. One case with severe implant exposure was salvaged with free temporoparietal fascia transfer and skin grafting. The combination of three-dimensional imaging and manufacturing technology with the malleability of MEDPOR has surpassed existing limitations resulting from the use of autologous materials and the ambiguity of two-dimensional planning. This approach allows surgeons to customize the auricular framework in a highly precise and sophisticated manner, taking a big step closer to the goal of mirror-image reconstruction for unilateral microtia patients. Therapeutic, IV.

A Minimal Path Searching Approach for Active Shape Model (ASM)-based Segmentation of the Lung.

PubMed

Guo, Shengwen; Fei, Baowei

2009-03-27

We are developing a minimal path searching method for active shape model (ASM)-based segmentation for detection of lung boundaries on digital radiographs. With the conventional ASM method, the position and shape parameters of the model points are iteratively refined and the target points are updated by the least Mahalanobis distance criterion. We propose an improved searching strategy that extends the searching points in a fan-shape region instead of along the normal direction. A minimal path (MP) deformable model is applied to drive the searching procedure. A statistical shape prior model is incorporated into the segmentation. In order to keep the smoothness of the shape, a smooth constraint is employed to the deformable model. To quantitatively assess the ASM-MP segmentation, we compare the automatic segmentation with manual segmentation for 72 lung digitized radiographs. The distance error between the ASM-MP and manual segmentation is 1.75 ± 0.33 pixels, while the error is 1.99 ± 0.45 pixels for the ASM. Our results demonstrate that our ASM-MP method can accurately segment the lung on digital radiographs.

A minimal path searching approach for active shape model (ASM)-based segmentation of the lung

NASA Astrophysics Data System (ADS)

Guo, Shengwen; Fei, Baowei

2009-02-01

We are developing a minimal path searching method for active shape model (ASM)-based segmentation for detection of lung boundaries on digital radiographs. With the conventional ASM method, the position and shape parameters of the model points are iteratively refined and the target points are updated by the least Mahalanobis distance criterion. We propose an improved searching strategy that extends the searching points in a fan-shape region instead of along the normal direction. A minimal path (MP) deformable model is applied to drive the searching procedure. A statistical shape prior model is incorporated into the segmentation. In order to keep the smoothness of the shape, a smooth constraint is employed to the deformable model. To quantitatively assess the ASM-MP segmentation, we compare the automatic segmentation with manual segmentation for 72 lung digitized radiographs. The distance error between the ASM-MP and manual segmentation is 1.75 +/- 0.33 pixels, while the error is 1.99 +/- 0.45 pixels for the ASM. Our results demonstrate that our ASM-MP method can accurately segment the lung on digital radiographs.

A Minimal Path Searching Approach for Active Shape Model (ASM)-based Segmentation of the Lung

PubMed Central

Guo, Shengwen; Fei, Baowei

2013-01-01

We are developing a minimal path searching method for active shape model (ASM)-based segmentation for detection of lung boundaries on digital radiographs. With the conventional ASM method, the position and shape parameters of the model points are iteratively refined and the target points are updated by the least Mahalanobis distance criterion. We propose an improved searching strategy that extends the searching points in a fan-shape region instead of along the normal direction. A minimal path (MP) deformable model is applied to drive the searching procedure. A statistical shape prior model is incorporated into the segmentation. In order to keep the smoothness of the shape, a smooth constraint is employed to the deformable model. To quantitatively assess the ASM-MP segmentation, we compare the automatic segmentation with manual segmentation for 72 lung digitized radiographs. The distance error between the ASM-MP and manual segmentation is 1.75 ± 0.33 pixels, while the error is 1.99 ± 0.45 pixels for the ASM. Our results demonstrate that our ASM-MP method can accurately segment the lung on digital radiographs. PMID:24386531

Optical-to-Tactile Translator

NASA Technical Reports Server (NTRS)

Langevin, Maurice L. (Inventor); Moynihan, Philip I. (Inventor)

2000-01-01

An optical-to-tactile translator provides an aid for the visually impaired by translating a near-field scene to a tactile signal corresponding to said near-field scene. An optical sensor using a plurality of active pixel sensors (APS) converts the optical image within the near-field scene to a digital signal. The digital signal is then processed by a microprocessor and a simple shape signal is generated based on the digital signal. The shape signal is then communicated to a tactile transmitter where the shape signal is converted into a tactile signal using a series of contacts. The shape signal may be an outline of the significant shapes determined in the near-field scene, or the shape signal may comprise a simple symbolic representation of common items encountered repeatedly. The user is thus made aware of the unseen near-field scene, including potential obstacles and dangers, through a series of tactile contacts. In a preferred embodiment, a range determining device such as those commonly found on auto-focusing cameras is included to limit the distance that the optical sensor interprets the near-field scene.

Milnesium berladnicorum sp. n. (Eutardigrada, Apochela, Milnesiidae), a new species of water bear from Romania

PubMed Central

Ciobanu, Daniel Adrian; Zawierucha, Krzysztof; Moglan, Ioan; Kaczmarek, Łukasz

2014-01-01

Abstract In a lichen sample collected from a tree in Bârlad town (Vaslui County, Romania), a new tardigrade species belonging to the genus Milnesium (granulatum group) was found. Milnesium berladnicorum sp. n. is most similar (in the type of dorsal sculpture) to Milnesium beasleyi Kaczmarek et al., 2012 but differs from it mainly by having a different claw configuration and some morphometric characters. Additionally, the new species differs from other congeners of the granulatum group by the different type of dorsal sculpture, claw configuration and some morphometric characters. PMID:25147467

The use of linear programming techniques to design optimal digital filters for pulse shaping and channel equalization

NASA Technical Reports Server (NTRS)

Houts, R. C.; Burlage, D. W.

1972-01-01

A time domain technique is developed to design finite-duration impulse response digital filters using linear programming. Two related applications of this technique in data transmission systems are considered. The first is the design of pulse shaping digital filters to generate or detect signaling waveforms transmitted over bandlimited channels that are assumed to have ideal low pass or bandpass characteristics. The second is the design of digital filters to be used as preset equalizers in cascade with channels that have known impulse response characteristics. Example designs are presented which illustrate that excellent waveforms can be generated with frequency-sampling filters and the ease with which digital transversal filters can be designed for preset equalization.

Digital pulse shape discrimination.

PubMed

Miller, L F; Preston, J; Pozzi, S; Flaska, M; Neal, J

2007-01-01

Pulse-shape discrimination (PSD) has been utilised for about 40 years as a method to obtain estimates for dose in mixed neutron and photon fields. Digitizers that operate close to GHz are currently available at a reasonable cost, and they can be used to directly sample signals from photomultiplier tubes. This permits one to perform digital PSD rather than the traditional, and well-established, analogoue techniques. One issue that complicates PSD for neutrons in mixed fields is that the light output characteristics of typical scintillators available for PSD, such as BC501A, vary as a function of energy deposited in the detector. This behaviour is more easily accommodated with digital processing of signals than with analogoue signal processing. Results illustrate the effectiveness of digital PSD.

Compton suppression in BEGe detectors by digital pulse shape analysis.

PubMed

Mi, Yu-Hao; Ma, Hao; Zeng, Zhi; Cheng, Jian-Ping; Li, Jun-Li; Zhang, Hui

2017-03-01

A new method of pulse shape discrimination (PSD) for BEGe detectors is developed to suppress Compton-continuum by digital pulse shape analysis (PSA), which helps reduce the Compton background level in gamma ray spectrometry. A decision parameter related to the rise time of a pulse shape was presented. The method was verified by experiments using 60 Co and 137 Cs sources. The result indicated that the 60 Co Peak to Compton ratio and the Cs-Peak to Co-Compton ratio could be improved by more than two and three times, respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.

Rugosity and hardness determination in obsidianus lapis for the design of an Yb3+-doped fiber laser

NASA Astrophysics Data System (ADS)

Alvarez-Chavez, J. A.; Aguilar-Morales, A. I.; Perez-Sanchez, G. G.; Morales-Ramirez, A. J.

2015-01-01

Obsidianus lapis is a volcanic rock that has been worked into tools for cutting or weaponry by Teotihuacan people for hundreds of years. Currently, it is used in jewelry or for house decorative items such as elaborated sculptures. From the physico-chemical properties point of view, obsidianus lapis is considered a glass as its composition is 80% silicon dioxide. In México, there are different kinds of obsidianus lapis which are classified according to its colour: rainbow, black, brown, red, silver, golden and snowflake. The traditional grinding process for working with obsidianus lapis includes fixed grinders and sandpaper for the polishing process, where the craftsman grinds the rock manually for obtaining a variety of shapes. Laser processing of natural stones is a relatively new area. We propose the use of an Yb3+-doped fibre laser for cutting and ablating obsidianus lapis into spherical, rectangular and oval shapes. By means of a theoretical analysis of roughness and hardness, which affect the different surfaces and final shapes, and by considering the changes in material temperature during laser interaction, this work will focus on parameter determination such as: laser fluence, incidence angle, laser average power and peak pulse energy, from the proposed Q-switched fibre laser design. Full optical, hardness and rugosity, initial and final characterization will be included in the presentation.

Phylogenetic reconstruction and shell evolution of the Diplommatinidae (Gastropoda: Caenogastropoda).

PubMed

Webster, Nicole B; Van Dooren, Tom J M; Schilthuizen, Menno

2012-06-01

The fascinating and often unlikely shell shapes in the terrestrial micromollusc family Diplommatinidae (Gastropoda: Caenogastropoda) provide a particularly attractive set of multiple morphological traits to investigate evolutionary patterns of shape variation. Here, a molecular phylogenetic reconstruction, based on five genes and 2700 bp, was undertaken for this family, integrated with ancestral state reconstruction and phylogenetic PCA of discrete and quantitative traits, respectively. We found strong support for the Diplommatininae as a monophyletic group, separating the Cochlostomatidae into a separate family. Five main clades appear within the Diplommatininae, corresponding with both coiling direction and biogeographic patterns. A Belau clade (A) with highly diverse (but always sinistral) morphology comprised Hungerfordia, Palaina, and some Diplommatina. Arinia (dextral) and Opisthostoma (sinistroid) are sister groups in clade B. Clade C and D solely contain sinistral Diplommatina that are robust and little ornamented (clade C) or slender and sculptured (clade D). Clade E is dextral but biogeographically diverse with species from all sampled regions save the Caroline Islands. Adelopoma, Diplommatina, Palaina, and Hungerfordia require revision to allow taxonomy to reflect phylogeny, whereas Opisthostoma is clearly monophyletic. Ancestral state reconstruction suggests a sinistral origin for the Diplommatinidae, with three reversals to dextrality. Copyright © 2012 Elsevier Inc. All rights reserved.

A new fabrication technique for complex refractive micro-optical systems

NASA Astrophysics Data System (ADS)

Tormen, Massimo; Carpentiero, Alessandro; Ferrari, Enrico; Cabrini, Stefano; Cojoc, Dan; Di Fabrizio, Enzo

2006-01-01

We present a new method that allows to fabricate structures with tightly controlled three-dimensional profiles in the 10 nm to 100 μm scale range. This consists of a sequence of lithographic steps such as Electron Beam (EB) or Focused Ion Beam (FIB) lithography, alternated with isotropic wet etching processes performed on a quartz substrate. Morphological characterization by SEM and AFM shows that 3D structures with very accurate shape control and nanometer scale surface roughness can be realized. Quartz templates have been employed as complex system of micromirrors after metal coating of the patterned surface or used as stamps in nanoimprint, hot embossing or casting processes to shape complex plastic elements. Compared to other 3D micro and nanostructuring methods, in which a hard material is directly "sculptured" by energetic beams, our technique requires a much less intensive use of expensive lithographic equipments, for comparable volumes of structured material, resulting in dramatic increase of throughput. Refractive micro-optical elements have been fabricated and characterized in transmission and reflection modes with white and monochromatic light. The elements produce a distribution of sharp focal spots and lines in the three dimensional space, opening the route for applications of image reconstruction based on refractive optics.

Recent progress of obliquely deposited thin films for industrial applications

NASA Astrophysics Data System (ADS)

Suzuki, Motofumi; Itoh, Tadayoshi; Taga, Yasunori

1999-06-01

More than 10 years ago, birefringent films of metal oxides were formed by oblique vapor deposition and investigated with a view of their application to optical retardation plates. The retardation function of the films was explained in terms of the birefringence caused by the characteristic anisotropic nanostructure inside the films. These films are now classified in the genre of the so-called sculptured thin films. However, the birefringent films thus prepared are not yet industrialized even now due to the crucial lack of the durability and the yield of products. In this review paper, we describe the present status of application process of the retardation films to the information systems such as compact disc and digital versatile disc devices with a special emphasis on the uniformity of retardation properties in a large area and the stability of the optical properties of the obliquely deposited thin films. Finally, further challenges for wide application of the obliquely deposited thin films are also discussed.

Simultaneous acquisition of 3D shape and deformation by combination of interferometric and correlation-based laser speckle metrology.

PubMed

Dekiff, Markus; Berssenbrügge, Philipp; Kemper, Björn; Denz, Cornelia; Dirksen, Dieter

2015-12-01

A metrology system combining three laser speckle measurement techniques for simultaneous determination of 3D shape and micro- and macroscopic deformations is presented. While microscopic deformations are determined by a combination of Digital Holographic Interferometry (DHI) and Digital Speckle Photography (DSP), macroscopic 3D shape, position and deformation are retrieved by photogrammetry based on digital image correlation of a projected laser speckle pattern. The photogrammetrically obtained data extend the measurement range of the DHI-DSP system and also increase the accuracy of the calculation of the sensitivity vector. Furthermore, a precise assignment of microscopic displacements to the object's macroscopic shape for enhanced visualization is achieved. The approach allows for fast measurements with a simple setup. Key parameters of the system are optimized, and its precision and measurement range are demonstrated. As application examples, the deformation of a mandible model and the shrinkage of dental impression material are measured.

The ozone-like syndrome in durum wheat (Triticum durum Desf.): Mechanisms underlying the different symptomatic responses of two sensitive cultivars.

PubMed

Picchi, Valentina; Monga, Robert; Marzuoli, Riccardo; Gerosa, Giacomo; Faoro, Franco

2017-03-01

Colombo and Sculptur are two modern durum wheat cultivars that, in previous studies, proved to be very sensitive to ozone injury in terms of eco-physiological parameters and significant grain yield loss. Nevertheless, their response regarding leaf visible symptoms was very different; Sculptur showed almost no symptoms, even after several weeks of ozone exposure, whereas Colombo showed in a few weeks typical ozone-like symptoms (chlorotic/necrotic spots). The mechanisms underlying this different response has been studied with a biochemical and microscopical approach. Plants were grown in Open-Top Chambers (OTCs) and exposed to charcoal filtered and ozone enriched air. Flag leaves were analyzed at two phenological stages (pre- and post-anthesis). At pre-anthesis the ascorbate pool was significantly lower in Colombo, which also underwent an increase in the oxidized glutathione content and abundant H 2 O 2 deposition in mesophyll cells around the substomatal chamber. No or scarce H 2 O 2 was found at both phenological stages in ozone exposed leaf tissues of Sculptur, where stomata appeared often closed. In this cultivar, transmission electron microscopy showed that chloroplasts in apparently undamaged mesophyll cells were slightly swollen and presented numerous plastoglobuli, as a result of a mild oxidative stress. These results suggest that Sculptur leaves remains symptomless as a consequence of the higher content of constitutive ascorbate pool and the synergistic effect of stomata closure. Instead, Colombo shows chlorotic/necrotic symptoms because of the lower ROS (Reactive Oxygen Species) scavenging capacity and the less efficient stomata closure that lead to severe damages of groups of the mesophyll cells, however leaving the surrounding photosynthetic tissue functional. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Morphological variation in glochidia shells of six species of Elliptio from Gulf of Mexico and Atlantic Coast drainages in the southeastern United States

USGS Publications Warehouse

O'Brien, C. A.; Williams, J.D.; Hoggarth, M.A.

2003-01-01

The genus Elliptio, with 36 currently recognized species, is the largest genus in the family Unionidae in North America. The genus is represented by two species, Elliptio crassidens and E. dilatata, in the Interior Basin and 34 species in drainages of the eastern Gulf of Mexico and Atlantic Coast. The paucity and variation of conchological characters in the genus Elliptio makes it extremely difficult to define species and determine relationships. We examined glochidia from six species of Elliptio in an effort to determine if there are useful characteristics for species level identification and/or characters for identification of species groups. Elliptio species were selected to represent different morphological groups from four drainages in the southeastern United States. The glochidia from E. crassidens, E. dariensis, E. hopetonensis, E. icterina, E. shepardiana, and E. mcmichaeli were qualitatively compared, using scanning electron microscopy, with each other and with descriptions of these and other Elliptio glochidia described in the literature. Two groups were identified. The crassidens group, including E. crassidens, E. dariensis, and E. mcmichaeli, had subtriangular glochidia with a triangular styliform hook extending from the ventral margin of the valve and rough exterior valve sculpturing. Adults of this group had wrinkled or corrugated sculpturing on the posterior slope of the shell. The complanata group, including E. hopetonensis, E. icterina, and E. shepardiana, had subelliptical glochidia with a broad flange extending the entire ventral margin and loose-looped exterior valve sculpturing. Adults of this group lack sculpturing on the posterior slope of the shell. Differences in glochidial morphometrics were found, however, additional work is needed to determine if they are reliable for species level identification.

Nondestructive insights into composition of the sculpture of Egyptian Queen Nefertiti with CT.

PubMed

Huppertz, Alexander; Wildung, Dietrich; Kemp, Barry J; Nentwig, Tanja; Asbach, Patrick; Rasche, Franz Maximilian; Hamm, Bernd

2009-04-01

To assess the conservation status of, to gain information on the creation of, and to provide surface reformations of the core and the surface of the bust of the pharaoh-queen Nefertiti, considered to be one of the greatest treasures of ancient Egyptian art, with computed tomography (CT). Multisection CT was performed with 0.6-mm section thickness. Two- and three-dimensional reformations were made to depict the core and the surface separately. The stucco layer on the face and the ears was very thin, a maximum of 1-2 mm thick. The rear part of the reconstructed crown showed two thick stucco layers of different attenuation values, indicating that a multistep process was used to create the sculpture. Within the stucco, a great number of air-equivalent hypoattenuating areas, filamentous fissures parallel to the surface, and an inhomogeneous bonding between the layers were delineated. Nefertiti's inner face was not anonymous, but rather delicately sculpted by the royal sculptor Thutmose. The comparison to the outer face revealed differences, including the angles of the eyelids, creases around the corners of the mouth on the limestone surface, and a slight bump on the ridge of the nose. According to the beauty ideals of the Amarna period, the differences had positive and negative effects and can be read as signs of individualization of the sculpture. The potential material-related weaknesses of the sculpture that were revealed at imaging necessitate careful handling, with the avoidance of any focal pressure and shearing forces in the crown and the shoulders. CT imaging revealed construction techniques in Nefertiti's bust that had implications for conservation, as well as for an understanding of the artistic methods used in the creation of this masterpiece of art of the 18th dynasty.

Morphology and systematic position of Cingula tumidula G.O. Sars, 1878 Gastropoda: Rissoidae).

PubMed

Nekhaev, Ivan O

2016-11-03

Rissoidae is a family of small to minute marine gastropods distributed worldwide. The generic composition of the family was revised by Ponder (1984) based on characters of external morphology and internal anatomy. However, species level taxonomy within the family is still based mainly on conchological characters, which are less informative and usually not sufficient for resolving the systematic relationships of species. Northern Atlantic representatives of the family were revised by Warén (1974; 1996) and Bouchet & Warén (1993) based on shape and sculpture of both proto- and teleoconch, and were suggested to be members of several genera, widely distributed in boreal or even tropical Atlantic environments. These include Alvania Risso, 1826; Onoba H. & A. Adams, 1852; Obtusella Cossmann, 1921 and a few more. However, it was recently demonstrated that some these genera are not monophyletic (Criscione et al. 2016).

Ice sculpture in the Martian outflow channels

NASA Technical Reports Server (NTRS)

Lucchitta, B. K.

1982-01-01

Viking Orbiter and terrestrial satellite images are examined at similar resolution to compare features of the Martian outflow channels with features produced by the movement of ice on earth, and many resemblances are found. These include the anastomoses, sinuosities, and U-shaped cross profiles of valleys; hanging valleys; linear scour marks on valley walls; grooves and ridges on valley floors; and the streamlining of bedrock highs. Attention is given to the question whether ice could have moved in the Martian environment. It is envisaged that springs or small catastrophic outbursts discharged fluids from structural outlets or chaotic terrains. These fluids built icings that may have grown into substantial masses and eventually flowed like glaciers down preexisting valleys. An alternative is that the fluids formed rivers or floods that in turn formed ice jams and consolidated into icy masses in places where obstacles blocked their flow.

Virtual auditorium concepts for exhibition halls

NASA Astrophysics Data System (ADS)

Evans, Jack; Himmel, Chad; Knight, Sarah

2002-11-01

Many communities lack good performance facilities for symphonic music, opera, dramatic and musical arts, but have basic convention, exhibition or assembly spaces. It should be possible to develop performance space environments within large multipurpose facilities that will accommodate production and presentation of dramatic arts. Concepts for moderate-cost, temporary enhancements that transform boxy spaces into more intimate, acoustically articulated venues will be presented. Acoustical criteria and design parameters will be discussed in the context of creating a virtual auditorium within the building envelope. Physical, economic, and logistical limitations affect implementation. Sound reinforcement system augmentation can supplement the room conversion. Acceptable control of reflection patterns, reverberation, and to some extent, ambient noise, may be achieved with an array of nonpermanent reflector and absorber elements. These elements can sculpture an enclosure to approach the shape and acoustic characteristics of an auditorium. Plan and section illustrations will be included.

Barucynips panamensis, a new genus and species of oak gallwasps (Hymenoptera, Cynipidae, Cynipini) from Panama, and description of one new species of  Coffeikokkos

PubMed Central

Medianero, Enrique; Nieves-Aldrey, José Luis

2013-01-01

Abstract Barucynips panamensis Medianero & Nieves-Aldrey, a new genus and species of oak gallwasps (Hymenoptera: Cynipidae: Cynipini), is described from adults reared from galls on Quercus bumelioides in Panama. The new genus is taxonomically close to the recently described Coffeikokkos from Costa Rica, but differs from it and all of the described genera of Cynipini, by the shape and setation of the projecting part of the ventral spine of the hypopygium and by the sculpture of the propodeum. A new species of Coffeikokkos is also described from the same area, the Volcán Barú in Panama. Diagnostic characters, gall description, distribution, and biological data of the new genus and the two new species are given. The new genus is the first genus of oak gallwasps of the tribe Cynipini described in Panama. PMID:23794822

Particle identification using digital pulse shape discrimination in a nTD silicon detector with a 1 GHz sampling digitizer

NASA Astrophysics Data System (ADS)

Mahata, K.; Shrivastava, A.; Gore, J. A.; Pandit, S. K.; Parkar, V. V.; Ramachandran, K.; Kumar, A.; Gupta, S.; Patale, P.

2018-06-01

In beam test experiments have been carried out for particle identification using digital pulse shape analysis in a 500 μm thick Neutron Transmutation Doped (nTD) silicon detector with an indigenously developed FPGA based 12 bit resolution, 1 GHz sampling digitizer. The nTD Si detector was used in a low-field injection setup to detect light heavy-ions produced in reactions of ∼ 5 MeV/A 7Li and 12C beams on different targets. Pulse height, rise time and current maximum have been obtained from the digitized charge output of a high bandwidth charge and current sensitive pre-amplifier. Good isotopic separation have been achieved using only the digitized charge output in case of light heavy-ions. The setup can be used for charged particle spectroscopy in nuclear reactions involving light heavy-ions around the Coulomb barrier energies.

Troiage Aesthetics

NASA Astrophysics Data System (ADS)

Brown, Sheldon

As the world around us is transformed into digitally enabled forms and processes, aesthetic strategies are required that articulate this underlying condition. A method for doing so involves a formal and conceptual strategy that is derived from collage, montage and assemblage. This triple "age" is termed "troiage", and it uses a style of computational apparency which articulates the edges of our current representational forms and processes as the semantic elements of culture. Each of these component aesthetics has previously had an important effect upon different areas of contemporary art and culture. Collage in painting, montage in film, assemblage in sculpture and architecture, are recombined via algorithmic methods, forefronting the structure of the algorithmic itself. The dynamic of the aesthetic is put into play by examining binary relationships such as: nature/culture, personal/public, U.S/Mexico, freedom/coercion, mediation/experience, etc. Through this process, the pervasiveness of common algorithmic approaches across cultural and social operations is revealed. This aesthetic is used in the project "The Scalable City" in which a virtual urban landscape is created by users interacting with data taken from the physical world in the form of different photographic techniques. This data is transformed by algorithmic methods which have previously been unfamiliar to the types of data that they are utilizing. The Scalable City project creates works across many media; such as prints, procedural animations, digital cinema and interactive 3D computer graphic installations.

An online detection system for aggregate sizes and shapes based on digital image processing

NASA Astrophysics Data System (ADS)

Yang, Jianhong; Chen, Sijia

2017-02-01

Traditional aggregate size measuring methods are time-consuming, taxing, and do not deliver online measurements. A new online detection system for determining aggregate size and shape based on a digital camera with a charge-coupled device, and subsequent digital image processing, have been developed to overcome these problems. The system captures images of aggregates while falling and flat lying. Using these data, the particle size and shape distribution can be obtained in real time. Here, we calibrate this method using standard globules. Our experiments show that the maximum particle size distribution error was only 3 wt%, while the maximum particle shape distribution error was only 2 wt% for data derived from falling aggregates, having good dispersion. In contrast, the data for flat-lying aggregates had a maximum particle size distribution error of 12 wt%, and a maximum particle shape distribution error of 10 wt%; their accuracy was clearly lower than for falling aggregates. However, they performed well for single-graded aggregates, and did not require a dispersion device. Our system is low-cost and easy to install. It can successfully achieve online detection of aggregate size and shape with good reliability, and it has great potential for aggregate quality assurance.

Review and comparison of non-conventional imaging systems for three-dimensional digitization of transparent objects

NASA Astrophysics Data System (ADS)

Mériaudeau, Fabrice; Rantoson, Rindra; Fofi, David; Stolz, Christophe

2012-04-01

Fashion and design greatly influence the conception of manufactured products which now exhibit complex forms and shapes. Two-dimensional quality control procedures (e.g., shape, textures, colors, and 2D geometry) are progressively being replaced by 3D inspection methods (e.g., 3D geometry, colors, and texture on the 3D shape) therefore requiring a digitization of the object surface. Three dimensional surface acquisition is a topic which has been studied to a large extent, and a significant number of techniques for acquiring 3D shapes has been proposed, leading to a wide range of commercial solutions available on the market. These systems cover a wide range from micro-scale objects such as shape from focus and shape from defocus techniques, to several meter sized objects (time of flight technique). Nevertheless, the use of such systems still encounters difficulties when dealing with non-diffuse (non Lambertian) surfaces as is the case for transparent, semi-transparent, or highly reflective materials (e.g., glass, crystals, plastics, and shiny metals). We review and compare various systems and approaches which were recently developed for 3D digitization of transparent objects.

Flexible circuits with integrated switches for robotic shape sensing

NASA Astrophysics Data System (ADS)

Harnett, C. K.

2016-05-01

Digital switches are commonly used for detecting surface contact and limb-position limits in robotics. The typical momentary-contact digital switch is a mechanical device made from metal springs, designed to connect with a rigid printed circuit board (PCB). However, flexible printed circuits are taking over from the rigid PCB in robotics because the circuits can bend while carrying signals and power through moving joints. This project is motivated by a previous work where an array of surface-mount momentary contact switches on a flexible circuit acted as an all-digital shape sensor compatible with the power resources of energy harvesting systems. Without a rigid segment, the smallest commercially-available surface-mount switches would detach from the flexible circuit after several bending cycles, sometimes violently. This report describes a low-cost, conductive fiber based method to integrate electromechanical switches into flexible circuits and other soft, bendable materials. Because the switches are digital (on/off), they differ from commercially-available continuous-valued bend/flex sensors. No amplification or analog-to-digital conversion is needed to read the signal, but the tradeoff is that the digital switches only give a threshold curvature value. Boundary conditions on the edges of the flexible circuit are key to setting the threshold curvature value for switching. This presentation will discuss threshold-setting, size scaling of the design, automation for inserting a digital switch into the flexible circuit fabrication process, and methods for reconstructing a shape from an array of digital switch states.

G-38, G-39 and G-40: Art in space, a divergent exploration

NASA Technical Reports Server (NTRS)

Mcshane, J. W.

1986-01-01

The results of the Get Away Special (GAS) Arts-Science payload G-38, processed in orbit on board the Space Shuttle Challenger during mission 41-G STS 17, October 5 to 13, l984 are explained. The payload G-38 was created as a unified Arts-Science payload that simultaneously explored the process of vapor deposition in the vacuum and weightlessness of the shuttle environment and created a series of space sculptures utilizing this process. The purpose of the experiment was to test the sputter deposition process in space and to create five subtle spherical sculptures with metallic coatings of gold, silver, platinum and chrome.

Pigment identification on ``Pietà'' of Barletta, example of Renaissance Apulian sculpture: A Raman microscopy study

NASA Astrophysics Data System (ADS)

Marano, D.; Catalano, I. M.; Monno, A.

2006-08-01

A study of the original painting layer of the "Pietà" of Barletta, a polychrome statue, important example of Renaissance Apulian sculpture, was performed by μ-Raman spectroscopy. Vermilion was identified in the original layer of the blood drops on Jesus knee. Lazurite was identified as the original blue pigment on Our Lady's veil and lace, currently a yellow ochre-like color. The use of lazurite demonstrates the historical-artistic importance of this polychrome statue, and supports the hypothesis that this artwork was probably commissioned by Our Lady's devotees to itinerant artists inspired by the more precious Vesperbilder model.

Vapor and liquid optical monitoring with sculptured Bragg microcavities

NASA Astrophysics Data System (ADS)

Oliva-Ramirez, Manuel; Gil-Rostra, Jorge; López-Santos, Maria Carmen; González-Elipe, Agustín R.; Yubero, Francisco

2017-10-01

Sculptured porous Bragg microcavities (BMs) formed by the successive stacking of columnar SiO2 and TiO2 thin films with a zig-zag columnar microstructure are prepared by glancing angle deposition. These BMs act as wavelength-dependent optical retarders. This optical behavior is attributed to a self-structuration of the stacked layers involving the lateral association of nanocolumns in the direction perpendicular to the main flux of particles during the multilayer film growth, as observed by focused ion beam scanning electron microscopy. The retardance of these optically active BMs can be modulated by dynamic infiltration of their open porosity with vapors, liquids, or solutions with different refractive indices. The tunable birefringence of these nanostructured photonic systems has been successfully simulated with a simple model that assumes that each layer within the BMs stack has uniaxial birefringence. The sculptured BMs have been incorporated as microfluidic chips for optical transduction for label-free vapor and liquid sensing. Several examples of the detection performance of these chips, working either in reflection or transmission configuration, for the optical monitoring of vapor and liquids of different refractive indices and aqueous solutions of glucose flowing through the microfluidic chips are described.

Correlation between pollen morphology and pollination mechanisms in the Hydrocharitaceae.

PubMed

Tanaka, Norio; Uehara, Koichi; Murata, Jin

2004-08-01

The pollen morphology of 11 genera and 11 species of the Hydrocharitaceae and one species of the Najadaceae was studied using scanning and transmission electron microscopies, and the exine structures and sculptures are discussed in relation to pollination mechanisms and the molecular phylogeny. The pollen grains of the Hydrocharitaceae are spherical, inaperturate, and form monads or tetrads, while those of the Najadaceae are elliptical, inaperturate, and form monads. The entomophilous genera Egeria, Blyxa, Ottelia, Stratiotes, and Hydrocharis share pollen grains that have projections like spines or bacula. The anemophilous genus Limnobium has reticulate pollen grains. The hypohydrophilous genera Thalassia and Najas are characterized by pollen grains with reduced exine structures. The pollen-epihydrophilous genera Elodea and Hydrilla have tightly arranged small spinous pollen grains, and the male flower-epihydrophilous genera Enhalus and Vallisneria have reduced reticulate or gemmate exines. Character state reconstruction of the exine structures and sculptures using a molecular phylogenetic tree suggests that variation in the exine is generally correlated with the pollination mechanism; the selective pressures acting on the pollination mechanisms have reduced the exine structure in hypohydrophilous plants and resulted in various exine sculptures that are adapted to the different pollination mechanisms in entomophilous, anemophilous, and pollen-epihydrophilous plants.

Interlocked by nanoscale sculpturing: pure aluminum copper contacts (Conference Presentation)

NASA Astrophysics Data System (ADS)

Gerngross-Baytekin, Melike; Gerngross, Mark Daniel; Carstensen, Jürgen; Adelung, Rainer

2017-06-01

Connecting metals reliable with different corrosion potential is a well-known challenge. An extreme example are copper aluminum contacts. Galvanic corrosion occurs if the two different metals are in contact with each other and an electrolyte, the aluminum becomes susceptible to corrosion under current flow. Usually, antioxidant pastes containing metals are employed but create difficulties e.g. for fatigue resistant power electronic connections. The recently described process of nanoscale sculpturing [1] offers an alternative. Usually, if the surface of metals like aluminium are prepared they are just arbitrary cuts through the bulk. There is no optimization of the surface grain structure towards stability at all. Neither the crystalline facets in the grains are in their most stable orientation nor is the protective oxide shell the most stable one. The nanoscale sculpturing approach is carving out the most stable grains and planes by chemical or electrochemical treatment. The decisive trick is that the chemistry is targeting towards the instable oxide and not the metal. Aluminium sample surfaces including alloys like AA575 exhibit afterwards single crystalline surface facets covered with nanoscale stable oxide films. Galvanically deposited copper forms extremely reliable interlocked connections on top, even allowing for soldering on top of their surface.

Digital Culture, and the Viewing/Participating Pre-Service Teacher: (Re)envisioning Theatre Teacher Training for a Social Media Culture

ERIC Educational Resources Information Center

Jensen, Amy

2012-01-01

This paper explores how our "digital world" shapes the ways that young people want to be engaged and how those desires subsequently shape academic theatre spaces. The paper uses artefacts developed in a university classroom to demonstrate that pre-service theatre educators can create educational materials that interrogate and deploy multiple media…

Shape and 3D acoustically induced vibrations of the human eardrum characterized by digital holography

NASA Astrophysics Data System (ADS)

Khaleghi, Morteza; Furlong, Cosme; Cheng, Jeffrey Tao; Rosowski, John J.

2014-07-01

The eardrum or Tympanic Membrane (TM) transfers acoustic energy from the ear canal (at the external ear) into mechanical motions of the ossicles (at the middle ear). The acousto-mechanical-transformer behavior of the TM is determined by its shape and mechanical properties. For a better understanding of hearing mysteries, full-field-of-view techniques are required to quantify shape, nanometer-scale sound-induced displacement, and mechanical properties of the TM in 3D. In this paper, full-field-of-view, three-dimensional shape and sound-induced displacement of the surface of the TM are obtained by the methods of multiple wavelengths and multiple sensitivity vectors with lensless digital holography. Using our developed digital holographic systems, unique 3D information such as, shape (with micrometer resolution), 3D acoustically-induced displacement (with nanometer resolution), full strain tensor (with nano-strain resolution), 3D phase of motion, and 3D directional cosines of the displacement vectors can be obtained in full-field-ofview with a spatial resolution of about 3 million points on the surface of the TM and a temporal resolution of 15 Hz.

Geometrical modeling of complete dental shapes by using panoramic X-ray, digital mouth data and anatomical templates.

PubMed

Barone, Sandro; Paoli, Alessandro; Razionale, Armando Viviano

2015-07-01

In the field of orthodontic planning, the creation of a complete digital dental model to simulate and predict treatments is of utmost importance. Nowadays, orthodontists use panoramic radiographs (PAN) and dental crown representations obtained by optical scanning. However, these data do not contain any 3D information regarding tooth root geometries. A reliable orthodontic treatment should instead take into account entire geometrical models of dental shapes in order to better predict tooth movements. This paper presents a methodology to create complete 3D patient dental anatomies by combining digital mouth models and panoramic radiographs. The modeling process is based on using crown surfaces, reconstructed by optical scanning, and root geometries, obtained by adapting anatomical CAD templates over patient specific information extracted from radiographic data. The radiographic process is virtually replicated on crown digital geometries through the Discrete Radon Transform (DRT). The resulting virtual PAN image is used to integrate the actual radiographic data and the digital mouth model. This procedure provides the root references on the 3D digital crown models, which guide a shape adjustment of the dental CAD templates. The entire geometrical models are finally created by merging dental crowns, captured by optical scanning, and root geometries, obtained from the CAD templates. Copyright © 2015 Elsevier Ltd. All rights reserved.

Consistency, precision, and accuracy of optical and electromagnetic shape-capturing systems for digital measurement of residual-limb anthropometrics of persons with transtibial amputation.

PubMed

Geil, Mark D

2007-01-01

Computer-aided design (CAD) and computer-aided manufacturing systems have been adapted for specific use in prosthetics, providing practitioners with a means to digitally capture the shape of a patient's limb, modify the socket model using software, and automatically manufacture either a positive model to be used in the fabrication of a socket or the socket itself. The digital shape captured is a three-dimensional (3-D) model from which standard anthropometric measures can be easily obtained. This study recorded six common anthropometric dimensions from CAD shape files of three foam positive models of the residual limbs of persons with transtibial amputations. Two systems were used to obtain 3-D models of the residual limb, a noncontact optical system and a contact-based electromagnetic field system, and both experienced practitioners and prosthetics students conducted measurements. Measurements were consistent; the mean range (difference of maximum and minimum) across all measurements was 0.96 cm. Both systems provided similar results, and both groups used the systems consistently. Students were slightly more consistent than practitioners but not to a clinically significant degree. Results also compared favorably with traditional measurement, with differences versus hand measurements about 5 mm. These results suggest the routine use of digital shape capture for collection of patient volume information.

Digital Citizenship District-Wide: Examining the Organizational Evolution of an Initiative

ERIC Educational Resources Information Center

Monterosa, Vanessa M.

2017-01-01

District leaders play a pivotal role in shaping federally-mandated policies that impact how digital citizenship curriculum is developed and implemented in schools. Yet, for many school leaders, teaching about digital participation may appear as a daunting and unfamiliar practice. In fact, most educators do not participate in digital communities,…

Digital Media, Technologies and Scholarship: Some Shapes of eResearch in Educational Inquiry

ERIC Educational Resources Information Center

Markauskaite, Lina

2010-01-01

This paper discusses some recent developments in digital media, research technologies and scholarly practices that are known under the umbrella term of "eResearch". Drawing on conceptual ideas of digital materialism, epistemic artefacts and epistemic tools, this paper discusses how the digital inscription of knowledge and knowing could…

Neutron/ γ-ray digital pulse shape discrimination with organic scintillators

NASA Astrophysics Data System (ADS)

Kaschuck, Y.; Esposito, B.

2005-10-01

Neutrons and γ-rays produce light pulses with different shapes when interacting with organic scintillators. This property is commonly used to distinguish between neutrons (n) and γ-rays ( γ) in mixed n/ γ fields as those encountered in radiation physics experiments. Although analog electronic pulse shape discrimination (PSD) modules have been successfully used for many years, they do not allow data reprocessing and are limited in count rate capability (typically up to 200 kHz). The performance of a n/ γ digital pulse shape discrimination (DPSD) system by means of a commercial 12-bit 200 MSamples/s transient recorder card is investigated here. Three organic scintillators have been studied: stilbene, NE213 and anthracene. The charge comparison method has been used to obtain simultaneous n/ γ discrimination and pulse height analysis. The importance of DPSD for high-intensity radiation field measurements and its advantages with respect to analog PSD are discussed. Based on post-experiment simulations with acquired data, the requirements for fast digitizers to provide DPSD with organic scintillators are also analyzed.

Morphogenic designer--an efficient tool to digitally design tooth forms.

PubMed

Hajtó, J; Marinescu, C; Silva, N R F A

2014-01-01

Different digital software tools are available today for the purpose of designing anatomically correct anterior and posterior restorations. The current concepts present weaknesses, which can be potentially addressed by more advanced modeling tools, such as the ones already available in professional CAD (Computer Aided Design) graphical software. This study describes the morphogenic designer (MGD) as an efficient and easy method for digitally designing tooth forms for the anterior and posterior dentition. Anterior and posterior tooth forms were selected from a collection of digitalized natural teeth and subjectively assessed as "average". The models in the form of STL files were filtered, cleaned, idealized, and re-meshed to match the specifications of the software used. The shapes were then imported as wavefront ".obj" model into Modo 701, software built for modeling, texturing, visualization, and animation. In order to create a parametric design system, intentional interactive deformations were performed on the average tooth shapes and then further defined as morph targets. By combining various such parameters, several tooth shapes were formed virtually and their images presented. MGD proved to be a versatile and powerful tool for the purpose of esthetic and functional digital crown designs.

A comparison of 3 wound measurement techniques: effects of pressure ulcer size and shape.

PubMed

Bilgin, Mehtap; Güneş, Ulkü Yapucu

2013-01-01

The aim of this study was to examine the levels of agreement among 3 techniques used in wound measurement comparing more spherical versus irregularly shaped wounds. The design of this study is evaluative research. Sixty-five consecutive patients with 80 pressure ulcers of various sizes referred from a university hospital in Izmir, Turkey, were evaluated. The 80 pressure ulcers identified on the 65 participants were divided into 2 groups based on pressure ulcer shape and wound surface area. Twenty-four of the 80 ulcers (30%) were characterized as irregularly shaped and greater than 10 cm. Fifty-six were regularly shaped (approximating a circle) and less than 10 cm. Pressure ulcer areas were measured using 3 techniques: measurement with a ruler (wound area was calculated by measuring and multiplying the greatest length by the greatest width perpendicular to the greatest length), wound tracing using graduated acetate paper, and digital planimetry. The level of agreement among the techniques was explored using the intraclass correlation coefficient (ICC). Strong agreement was observed among the techniques when assessing small, more regularly shaped wounds (ICC = 0.95). Modest agreement was achieved when measuring larger, irregularly shaped wounds (ICC = 0.70). Each of these techniques is adequate for measuring surface areas of smaller wounds with an approximately circular shape. Measurement of pressure ulcer area via the ruler method tended to overestimate surface area in larger and more irregularly shaped wounds when compared to acetate and digital planimetry. We recommend digital planimetry or acetate tracing for measurement of larger and more irregularly shaped pressure ulcers in the clinical setting.

Remote interferometry by digital holography for shape control

NASA Astrophysics Data System (ADS)

Baumbach, Torsten; Osten, Wolfgang; Falldorf, Claas; Jueptner, Werner P. O.

2002-06-01

Modern production requires more and more effective methods for the inspection and quality control at the production place. Outsourcing and globalization result in possible large distances between co-operating partners. This may cause serious problems with respect to the just-in-time exchange of information and the response to possible violations of quality standards. Consequently new challenges arise for optical measurement techniques especially in the field of industrial shape control. A possible solution for these problems can be delivered by a technique that stores optically the full 3D information of the objects to be compared and where the data can be transported over large distances. In this paper we describe the progress in implementing a new technique for the direct comparison of the shape and deformation of two objects with different microstructure where it is not necessary that both samples are located at the same place. This is done by creating a coherent mask for the illumination of the sample object. The coherent mask is created by Digital Holography to enable the instant access to the complete optical information of the master object at any wanted place. The transmission of the digital master holograms to this place can be done via digital telecommunication networks. The comparison can be done in a digital or analogue way. Both methods result in a disappearance of the object shape and the appearance of the shape or deformation difference between the two objects only. The analogue reconstruction of the holograms with a liquid crystal spatial light modulator can be done by using the light modulator as an intensity modulator or as an phase modulator. The reconstruction technique and the space bandwidth of the light modulator will influence the quality of the result. Therefore the paper describes the progress in applying modern spatial light modulators and digital cameras for the effective storage and optical reconstruction of coherent masks.

A DSP equipped digitizer for online analysis of nuclear detector signals

NASA Astrophysics Data System (ADS)

Pasquali, G.; Ciaranfi, R.; Bardelli, L.; Bini, M.; Boiano, A.; Giannelli, F.; Ordine, A.; Poggi, G.

2007-01-01

In the framework of the NUCL-EX collaboration, a DSP equipped fast digitizer has been implemented and it has now reached the production stage. Each sampling channel is implemented on a separate daughter-board to be plugged on a VME mother-board. Each channel features a 12-bit, 125 MSamples/s ADC and a Digital Signal Processor (DSP) for online analysis of detector signals. A few algorithms have been written and successfully tested on detectors of different types (scintillators, solid-state, gas-filled), implementing pulse shape discrimination, constant fraction timing, semi-Gaussian shaping, gated integration.

General purpose pulse shape analysis for fast scintillators implemented in digital readout electronics

NASA Astrophysics Data System (ADS)

Asztalos, Stephen J.; Hennig, Wolfgang; Warburton, William K.

2016-01-01

Pulse shape discrimination applied to certain fast scintillators is usually performed offline. In sufficiently high-event rate environments data transfer and storage become problematic, which suggests a different analysis approach. In response, we have implemented a general purpose pulse shape analysis algorithm in the XIA Pixie-500 and Pixie-500 Express digital spectrometers. In this implementation waveforms are processed in real time, reducing the pulse characteristics to a few pulse shape analysis parameters and eliminating time-consuming waveform transfer and storage. We discuss implementation of these features, their advantages, necessary trade-offs and performance. Measurements from bench top and experimental setups using fast scintillators and XIA processors are presented.

Dental students' self-assessment of operative preparations using CAD/CAM: a preliminary analysis.

PubMed

Mays, Keith A; Levine, Eric

2014-12-01

The Commission on Dental Accreditation (CODA)'s accreditation standards for dental schools state that "graduates must demonstrate the ability to self-assess." Therefore, dental schools have developed preclinical and clinical self-assessment (SA) protocols aimed at fostering a reflective process. This study comparing students' visual SA with students' digital SA and with faculty assessment was designed to test the hypothesis that higher agreement would occur when utilizing a digital evaluation. Twenty-five first-year dental students at one dental school participated by preparing a mesial occlusal preparation on tooth #30 and performing both types of SAs. A faculty evaluation was then performed both visually and digitally using the same evaluation criteria. The Kappa statistic was used to measure agreement between evaluators. The results showed statistically significant moderate agreement between the faculty visual and faculty digital modes of evaluation for occlusal shape (K=0.507, p=0.002), proximal shape (K=0.564, p=0.001), orientation (K=0.425, p=0.001), and definition (K=0.480, p=0.001). There was slight to poor agreement between the student visual and faculty visual assessment, except for preparation orientation occlusal shape (K=0.164, p=0.022), proximal shape (K=-0.227, p=0.032), orientation (K=0.253, p=0.041), and definition (K=-0.027, p=0.824). This study showed that the students had challenges in self-assessing even when using CAD/CAM and the digital assessment did not improve the amount of student/faculty agreement.

Allergic contact dermatitis to acrylates in disposable blue diathermy pads.

PubMed Central

Sidhu, S. K.; Shaw, S.

1999-01-01

We report 2 cases of elicitation of allergic contact dermatitis to acrylates from disposable blue diathermy pads used on patients who underwent routine surgery. Their reactions were severe, and took approximately 5 weeks to resolve. Both patients gave a prior history of finger tip dermatitis following the use of artificial sculptured acrylic nails, which is a common, but poorly reported, cause of acrylate allergy. Patch testing subsequently confirmed allergies to multiple acrylates present in both the conducting gel of disposable blue diathermy pads, and artificial sculptured acrylic nails. We advocate careful history taking prior to surgery to avoid unnecessary exposure to acrylates in patients already sensitized. Images Figure 1 Figure 2 PMID:10364952

Analysis of medieval limestone sculpture from southwestern France and the Paris Basin by NAA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, L.; Harbottle, G.

1994-12-31

Compositional characterization of limestone from sources known to medieval craftsmen and from the monuments they built can be used in conjunction with stylistic and iconographic criteria to infer geographic origin of sculptures that have lost their histories. Limestone from 47 quarrying locations in France and from numerous medieval monuments have been subjected to neutron activation analysis (NAA) to form the nucleus of the Brookhaven Limestone Database. Even though the method and techniques of NAA are well established, this paper briefly summarizes the parameters and experimental conditions useful for determining those concentration variables for which limestone from different sources exhibits significantmore » and reproducible differences.« less

Shaping Our World: Digital Storytelling and the Authoring of Society

ERIC Educational Resources Information Center

Brzoska, Karen Lynn

2009-01-01

Globalization, networked societies, and a knowledge-based economy engender increasing reliance on digital communication technologies for the dissemination of information and ideas (Castells, Fernandez-Ardevol, Qiu & Sey, 2006). While the technological revolution has broadened access this digital domain, participants often adopt the passive…

In search of Leonardo: computer-based facial image analysis of Renaissance artworks for identifying Leonardo as subject

NASA Astrophysics Data System (ADS)

Tyler, Christopher W.; Smith, William A. P.; Stork, David G.

2012-03-01

One of the enduring mysteries in the history of the Renaissance is the adult appearance of the archetypical "Renaissance Man," Leonardo da Vinci. His only acknowledged self-portrait is from an advanced age, and various candidate images of younger men are difficult to assess given the absence of documentary evidence. One clue about Leonardo's appearance comes from the remark of the contemporary historian, Vasari, that the sculpture of David by Leonardo's master, Andrea del Verrocchio, was based on the appearance of Leonardo when he was an apprentice. Taking a cue from this statement, we suggest that the more mature sculpture of St. Thomas, also by Verrocchio, might also have been a portrait of Leonardo. We tested the possibility Leonardo was the subject for Verrocchio's sculpture by a novel computational technique for the comparison of three-dimensional facial configurations. Based on quantitative measures of similarities, we also assess whether another pair of candidate two-dimensional images are plausibly attributable as being portraits of Leonardo as a young adult. Our results are consistent with the claim Leonardo is indeed the subject in these works, but we need comparisons with images in a larger corpora of candidate artworks before our results achieve statistical significance.

[Aphasia and artistic creation].

PubMed

Kornyey, E

1977-01-01

An artist active drawing and waterpainting, most prominent in sculpture, suffered an apopleptic insult at 66 years of age. Right hemiparesis and severe motor aphasia remained but this with rare unexpected and sometimes rather complicated productions in spoken, and also in written language in spite of modest progress in writing exercise. His behaviour witnessed of the memory of remote and complicated stored material. Some months after the insult he resumed his artistic activity using his left hand and continued it principally in the same manner as before his illness. His drawing and water-painting displayed some uncertainty of lines and sometimes coarseness of the stain spots. His pieces of sculpture regained the quality of his earlier works, as proven already by the first statue he made after the insult. While it is generally accepted that the motor aphasia does not essentially affect the artistic production, even of high quality, in painting, this is the first instance which proves that the same holds true for sculpture. In this case the mechanisms inciting the finest innervation on the side of the cortical center of the left hand, can work with promptness. In motor aphasia the mechanisms indispensable for the correct realisation of the function are affected without a final extinction of the function itself. Motor asphasia is an instrumental disorder not necessarily accompanied by disturbances of the intelligence.

Teaching Language and Culture in a Digital Age

ERIC Educational Resources Information Center

Chamberlin-Quinlisk, Carla

2012-01-01

This article examines part of the complex relationship between linguistic and cultural diversity and the digital technologies that shape our social worlds. In particular, the author explores how digital media cultivate ideas about language practice in multicultural communities and simultaneously serve as a pedagogical tool for discussing…

An Exploratory Study on the Digital Identity Formation of Korean University EFL Learners

ERIC Educational Resources Information Center

Lee, Jang Ho; Kim, Heyoung

2014-01-01

The present study aims to sketch the contours of new media ecology for Korean university students as well as to examine how these learners shape and negotiate their digital identity by using social networking services and digital devices. It also investigates their use of digital media for learning English as a foreign language (EFL). In total,…

Heritage stones and their deterioration in rock-cut monuments in India

NASA Astrophysics Data System (ADS)

Sharma, Vinod K.

2017-04-01

India is dotted with thousands of rock- cut monuments of considerable antiquity having artwork of global importance. It is evident from the location of many of these monuments that knowledge of viable selection of site, geotechnical considerations and amenability to sculptures' chisel was vital for construction of rock-cut monuments and sculptures. These rock-cut structures also represent significant achievements of geotechnical and structural engineering and craftsmanship of contemporary period. The paper deals with some of the sites where natural rock-mass exposures were used to hew the monuments and highlight the deterioration owing to geological and climatic conditions. The Kailash temple in Ellora and Ajanta rock-cut caves are among the greatest architectural feats which owe their grandeur to amenability and consistency of basalt of Deccan Volcanic Province from which it is hewn. The Kailash Temple was created through a single, huge top-down excavation 100 feet deep down into the volcanic basaltic cliff rock. These ancient rock cut structures are amazing achievements of structural engineering and craftsmanship. The lava flows are nearly horizontal, competent rock medium facilitated the chiseling for the sculptures. The deterioration of these basalts are seen where the amygdule, vesicles and opening in rock discontinuity had the medium of construction or excavation. The monolithic rock- cut monuments of Mahabalipuram temples are constructed in the form of rathas or chriot and adjoining caves by excavating solid charnockite/granites. The large rock exposures are excavated and cut to perfection with wall decorations and sculptured art. The charnockites are the strongest and the most durable rock, yet quite amenable to fine dressing. These monolithic monuments in charnockite and are cut out of the hillock. The 7th Century monuments now exhibit somewhat rough surface probably due to weathering effect of salt laden winds from the sea side and alteration of feldspars. The Rock shelters of Bhimbetka, a World Heritage Site, are located within Vindhyan sandstone, yielded primitive tools and decorative rock paintings.The rock-cut caves in twin hills Udayagiri and Khandagiri , contain carvings sculptured in coarse grained grey to buff coloured sandstone of Gondwana group of rocks. The Badami cave temples constructed out of escarpment of the hill in sandstone represent some of the earliest known examples of Hindu temples. Utilizing in situ rock exposures, natural rocks and landscape of Deccan basalts, granites of peninsular shield, sandstones and limestone for rock cut architecture in India, thus, holds varied examples of rock-cut architectures.

Three Essays on Digital Evolution

ERIC Educational Resources Information Center

Zhang, Zhewei

2016-01-01

Digital products are rapidly shaping our world into a ubiquitous computing world. Because of its unique characteristics, digital artifacts are generative and highly evolving through the recombination of existing elements as well as by the invention of new elements. In this thesis, I first propose an evolutionary view to examine how digital…

An Exhibit for Touching.

ERIC Educational Resources Information Center

Hunt, Susan

1979-01-01

An exhibit designed for visually handicapped persons presented by the Kalamazoo (Michigan) Institute of Art included bronze sculptures and oil paintings from the institute's permanent collection. (CL)

Comparison of 3d Reconstruction Services and Terrestrial Laser Scanning for Cultural Heritage Documentation

NASA Astrophysics Data System (ADS)

Rasztovits, S.; Dorninger, P.

2013-07-01

Terrestrial Laser Scanning (TLS) is an established method to reconstruct the geometrical surface of given objects. Current systems allow for fast and efficient determination of 3D models with high accuracy and richness in detail. Alternatively, 3D reconstruction services are using images to reconstruct the surface of an object. While the instrumental expenses for laser scanning systems are high, upcoming free software services as well as open source software packages enable the generation of 3D models using digital consumer cameras. In addition, processing TLS data still requires an experienced user while recent web-services operate completely automatically. An indisputable advantage of image based 3D modeling is its implicit capability for model texturing. However, the achievable accuracy and resolution of the 3D models is lower than those of laser scanning data. Within this contribution, we investigate the results of automated web-services for image based 3D model generation with respect to a TLS reference model. For this, a copper sculpture was acquired using a laser scanner and using image series of different digital cameras. Two different webservices, namely Arc3D and AutoDesk 123D Catch were used to process the image data. The geometric accuracy was compared for the entire model and for some highly structured details. The results are presented and interpreted based on difference models. Finally, an economical comparison of the generation of the models is given considering the interactive and processing time costs.

3D imaging acquisition, modeling, and prototyping for facial defects reconstruction

NASA Astrophysics Data System (ADS)

Sansoni, Giovanna; Trebeschi, Marco; Cavagnini, Gianluca; Gastaldi, Giorgio

2009-01-01

A novel approach that combines optical three-dimensional imaging, reverse engineering (RE) and rapid prototyping (RP) for mold production in the prosthetic reconstruction of facial prostheses is presented. A commercial laser-stripe digitizer is used to perform the multiview acquisition of the patient's face; the point clouds are aligned and merged in order to obtain a polygonal model, which is then edited to sculpture the virtual prothesis. Two physical models of both the deformed face and the 'repaired' face are obtained: they differ only in the defect zone. Depending on the material used for the actual prosthesis, the two prototypes can be used either to directly cast the final prosthesis or to fabricate the positive wax pattern. Two case studies are presented, referring to prostetic reconstructions of an eye and of a nose. The results demonstrate the advantages over conventional techniques as well as the improvements with respect to known automated manufacturing techniques in the mold construction. The proposed method results into decreased patient's disconfort, reduced dependence on the anaplasthologist skill, increased repeatability and efficiency of the whole process.

3D workflow for HDR image capture of projection systems and objects for CAVE virtual environments authoring with wireless touch-sensitive devices

NASA Astrophysics Data System (ADS)

Prusten, Mark J.; McIntyre, Michelle; Landis, Marvin

2006-02-01

A 3D workflow pipeline is presented for High Dynamic Range (HDR) image capture of projected scenes or objects for presentation in CAVE virtual environments. The methods of HDR digital photography of environments vs. objects are reviewed. Samples of both types of virtual authoring being the actual CAVE environment and a sculpture are shown. A series of software tools are incorporated into a pipeline called CAVEPIPE, allowing for high-resolution objects and scenes to be composited together in natural illumination environments [1] and presented in our CAVE virtual reality environment. We also present a way to enhance the user interface for CAVE environments. The traditional methods of controlling the navigation through virtual environments include: glove, HUD's and 3D mouse devices. By integrating a wireless network that includes both WiFi (IEEE 802.11b/g) and Bluetooth (IEEE 802.15.1) protocols the non-graphical input control device can be eliminated. Therefore wireless devices can be added that would include: PDA's, Smart Phones, TabletPC's, Portable Gaming consoles, and PocketPC's.

A wave superposition method formulated in digital acoustic space

NASA Astrophysics Data System (ADS)

Hwang, Yong-Sin

In this thesis, a new formulation of the Wave Superposition method is proposed wherein the conventional mesh approach is replaced by a simple 3-D digital work space that easily accommodates shape optimization for minimizing or maximizing radiation efficiency. As sound quality is in demand in almost all product designs and also because of fierce competition between product manufacturers, faster and accurate computational method for shape optimization is always desired. Because the conventional Wave Superposition method relies solely on mesh geometry, it cannot accommodate fast shape changes in the design stage of a consumer product or machinery, where many iterations of shape changes are required. Since the use of a mesh hinders easy shape changes, a new approach for representing geometry is introduced by constructing a uniform lattice in a 3-D digital work space. A voxel (a portmanteau, a new word made from combining the sound and meaning, of the words, volumetric and pixel) is essentially a volume element defined by the uniform lattice, and does not require separate connectivity information as a mesh element does. In the presented method, geometry is represented with voxels that can easily adapt to shape changes, therefore it is more suitable for shape optimization. The new method was validated by computing radiated sound power of structures of simple and complex geometries and complex mode shapes. It was shown that matching volume velocity is a key component to an accurate analysis. A sensitivity study showed that it required at least 6 elements per acoustic wavelength, and a complexity study showed a minimal reduction in computational time.

Non-exhibition of Bragg phenomenon by chevronic sculptured thin films

NASA Astrophysics Data System (ADS)

Vepachedu, Vikas; McAtee, Patrick D.; Lakhtakia, Akhlesh

2017-08-01

The unit cell of a chevronic sculptured thin film (ChevSTF) comprises two identical columnar thin films (CTFs) except that the nanocolumns of the first are oriented at an angle Χ and nanocolumns of the second are oriented at an angle π - χ with respect to the interface of the two CTFs. A ChevSTF containing 10 unit cells was fabricated and its planewave reflectance and transmittance spectrums of this ChevSTF were measured. Despite its structural periodicity, the ChevSTF did not exhibit the Bragg phenomenon. Theoretical calculations with the CTFs modeled as biaxial dielectric materials indicated that the Bragg phenomenon would not be manifested for normal and near-normal incidence, but vestigial manifestation was possible for sufficiently oblique incidence.

Digital and optical shape representation and pattern recognition; Proceedings of the Meeting, Orlando, FL, Apr. 4-6, 1988

NASA Technical Reports Server (NTRS)

Juday, Richard D. (Editor)

1988-01-01

The present conference discusses topics in pattern-recognition correlator architectures, digital stereo systems, geometric image transformations and their applications, topics in pattern recognition, filter algorithms, object detection and classification, shape representation techniques, and model-based object recognition methods. Attention is given to edge-enhancement preprocessing using liquid crystal TVs, massively-parallel optical data base management, three-dimensional sensing with polar exponential sensor arrays, the optical processing of imaging spectrometer data, hybrid associative memories and metric data models, the representation of shape primitives in neural networks, and the Monte Carlo estimation of moment invariants for pattern recognition.

Shaping Laguerre-Gaussian laser modes with binary gratings using a digital micromirror device.

PubMed

Lerner, Vitaly; Shwa, David; Drori, Yehonathan; Katz, Nadav

2012-12-01

Laguerre-Gaussian (LG) beams are used in many research fields, including microscopy, laser cavity modes, and optical tweezing. We developed a holographic method to generate pure LG modes (amplitude and phase) with a binary amplitude-only digital micromirror device (DMD) as an alternative to the commonly used phase-only spatial light modulator. The advantages of such a DMD include very high frame rates, low cost, and high damage thresholds. We have shown that the propagating shaped beams are self-similar and their phase fronts are of helical shape as demanded. We estimate the purity of the resultant beams to be above 94%.

3D Laser System

NASA Image and Video Library

2015-09-16

NASA Glenn's Icing Research Tunnel 3D Laser System used for digitizing ice shapes created in the wind tunnel. The ice shapes are later utilized for characterization, analysis, and software development.

An Atlas of Academic Practice in Digital Times

ERIC Educational Resources Information Center

Decuypere, Mathias; Simons, Maarten

2014-01-01

In the current literature on the university it is generally accepted that processes of digitization play an important role regarding both the daily functioning of the university as an institution and the academics that give shape to it. This article contributes to our understanding of the role that digitization plays in contemporary academic…

Shaping the Curriculum: The Power of a Library's Digital Resources

ERIC Educational Resources Information Center

Kirkwood, Patricia

2011-01-01

Researchers were the first adopters of digital resources available through the library. Online journals and databases make finding research articles much easier than when this author started as a librarian more than 20 years ago. Speedier interlibrary loan due to digital delivery means research materials are never far away. Making it easier for…

Diagrams of Europeanization: European Education Governance in the Digital Age

ERIC Educational Resources Information Center

Decuypere, Mathias

2016-01-01

European education governance is increasingly affected by and effectuated through digital means. This article presents an analysis of the way in which Europe is increasingly deploying digital technologies, and more specifically websites, in order to shape and communicate its education policies. Drawing on the notion of the diagram as the…

A Historical Perspective on Student Affairs Professionals' Use of Digital Technology

ERIC Educational Resources Information Center

Cabellon, Edmund T.; Payne-Kirchmeier, Julie

2016-01-01

This chapter provides a historical perspective of student affairs professionals' use of digital and social technologies in their work on college campuses. The purpose of the chapter is to describe how digital technology tools have evolved since 2005, demonstrate how student affairs technology shifted and changed during this time, and shape student…

Development of a digital method for neutron/gamma-ray discrimination based on matched filtering

NASA Astrophysics Data System (ADS)

Korolczuk, S.; Linczuk, M.; Romaniuk, R.; Zychor, I.

2016-09-01

Neutron/gamma-ray discrimination is crucial for measurements with detectors sensitive to both neutron and gamma-ray radiation. Different techniques to discriminate between neutrons and gamma-rays based on pulse shape analysis are widely used in many applications, e.g., homeland security, radiation dosimetry, environmental monitoring, fusion experiments, nuclear spectroscopy. A common requirement is to improve a radiation detection level with a high detection reliability. Modern electronic components, such as high speed analog to digital converters and powerful programmable digital circuits for signal processing, allow us to develop a fully digital measurement system. With this solution it is possible to optimize digital signal processing algorithms without changing any electronic components in an acquisition signal path. We report on results obtained with a digital acquisition system DNG@NCBJ designed at the National Centre for Nuclear Research. A 2'' × 2'' EJ309 liquid scintillator was used to register mixed neutron and gamma-ray radiation from PuBe sources. A dedicated algorithm for pulse shape discrimination, based on real-time filtering, was developed and implemented in hardware.

Wetting and elasto-plasticity based sculpture of liquid marbles.

PubMed

Liu, Jianlin; Zuo, Pingcheng

2016-02-01

As an emerging material with exotic properties, liquid marble holds great potential for such areas as microfluidics, stimuli-responsive sensors, micro-chemical reactors, micro-bioreactors, energy harvesting devices, and mechanical structures. In this study, we mainly concentrate on the mechanical behaviors, such as elasto-plasticity of liquid marble with the decrease of liquid volume. The contact radius with the substrate and Young's contact angle of liquid marble are both measured with the change of water volume, and those of a water droplet are compared. The mechanism for the different responses for liquid marble and water droplet is clarified according to the mechanics analysis. Moreover, it is found that liquid marble can behave like an elasto-plastic material when the particle surface density is big enough. Based upon this fact, liquid marble can be sculpted to all kinds of special shapes as expected. These investigations may cast new light on how to engineer multifunctional materials and devices, which are beneficial to microprinting and micromachining.

Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers

NASA Astrophysics Data System (ADS)

Mao, Yiqi; Yu, Kai; Isakov, Michael S.; Wu, Jiangtao; Dunn, Martin L.; Jerry Qi, H.

2015-09-01

Folding is ubiquitous in nature with examples ranging from the formation of cellular components to winged insects. It finds technological applications including packaging of solar cells and space structures, deployable biomedical devices, and self-assembling robots and airbags. Here we demonstrate sequential self-folding structures realized by thermal activation of spatially-variable patterns that are 3D printed with digital shape memory polymers, which are digital materials with different shape memory behaviors. The time-dependent behavior of each polymer allows the temporal sequencing of activation when the structure is subjected to a uniform temperature. This is demonstrated via a series of 3D printed structures that respond rapidly to a thermal stimulus, and self-fold to specified shapes in controlled shape changing sequences. Measurements of the spatial and temporal nature of self-folding structures are in good agreement with the companion finite element simulations. A simplified reduced-order model is also developed to rapidly and accurately describe the self-folding physics. An important aspect of self-folding is the management of self-collisions, where different portions of the folding structure contact and then block further folding. A metric is developed to predict collisions and is used together with the reduced-order model to design self-folding structures that lock themselves into stable desired configurations.

Time-resolved gamma spectroscopy of single events

NASA Astrophysics Data System (ADS)

Wolszczak, W.; Dorenbos, P.

2018-04-01

In this article we present a method of characterizing scintillating materials by digitization of each individual scintillation pulse followed by digital signal processing. With this technique it is possible to measure the pulse shape and the energy of an absorbed gamma photon on an event-by-event basis. In contrast to time-correlated single photon counting technique, the digital approach provides a faster measurement, an active noise suppression, and enables characterization of scintillation pulses simultaneously in two domains: time and energy. We applied this method to study the pulse shape change of a CsI(Tl) scintillator with energy of gamma excitation. We confirmed previously published results and revealed new details of the phenomenon.

Pulse-shape discrimination of the new plastic scintillators in neutron-gamma mixed field using fast digitizer card

NASA Astrophysics Data System (ADS)

Jančář, A.; Kopecký, Z.; Dressler, J.; Veškrna, M.; Matěj, Z.; Granja, C.; Solar, M.

2015-11-01

Recently invented plastic scintillator EJ-299-33 enables pulse-shape discrimination (PSD) and thus measurement of neutron and photon spectra in mixed fields. In this work we compare the PSD properties of EJ-299-33 plastic and the well-known NE-213 liquid scintillator in monoenergetic neutron fields generated by the Van de Graaff accelerator using the 3H(d, n)4He reaction. Pulses from the scintillators are processed by a newly developed digital measuring system employing the fast digitizer card. This card contains two AD converters connected to the measuring computer via 10 Gbps optical ethernet. The converters operate with a resolution of 12 bits and have two differential inputs with a sampling frequency 1 GHz. The resulting digital channels with different gains are merged into one composite channel with a higher digital resolution in a wide dynamic range of energies. Neutron signals are fully discriminated from gamma signals. Results are presented.

The Creation of Space Vector Models of Buildings From RPAS Photogrammetry Data

NASA Astrophysics Data System (ADS)

Trhan, Ondrej

2017-06-01

The results of Remote Piloted Aircraft System (RPAS) photogrammetry are digital surface models and orthophotos. The main problem of the digital surface models obtained is that buildings are not perpendicular and the shape of roofs is deformed. The task of this paper is to obtain a more accurate digital surface model using building reconstructions. The paper discusses the problem of obtaining and approximating building footprints, reconstructing the final spatial vector digital building model, and modifying the buildings on the digital surface model.

Shape-Reprogrammable Polymers: Encoding, Erasing, and Re-Encoding (Postprint)

DTIC Science & Technology

2014-11-01

printing , is a layer-by-layer technology for producing 3D objects directly from a digital model. While 3D printing allows the fabrication of increasingly...one linear shape-translation processes often increase rapidly with shape complexity. Additive manufacturing, also called three-dimensional ( 3D

Artificial dexterous hand

NASA Technical Reports Server (NTRS)

Lee, Sukhan (Inventor)

1990-01-01

An artificial dexterous hand is provided for conformally engaging and manipulating objects. The hand includes an articulated digit which is connected to an engagement sub-assembly and has a first shape adaption mechanism associated with it. The digit has a digit base and first and second phalanges. The digit base is operatively interconnected to the first phalange by a base joint having a base pulley. The phalanges are operatively interconnected by a separate first phalange joint having a first phalange pulley. The engagement sub-assembly includes a tendon, which is received by the base pulley and by the first phalange pulley, and an actuation device for selectively tensioning the tendon. The first shape adaption mechanism is responsive to and receives the tendon. It is also situated between the base joint and the first phalange joint and is connected to the first phalange. Upon actuation by the actuation device, the phalanges are caused to pivot relative to the base joint and the second phalange is caused to pivot relative to the first phalange. At the same time, the first shape adaption mechanism controls the sequence of the aforementioned pivoting of the phalanges through application of braking force to the tendon.

Real-Time, Digital Pulse-Shape Discrimination in Non-Hazardous Fast Liquid Scintillation Detectors: Prospects for Safety and Security

NASA Astrophysics Data System (ADS)

Joyce, Malcolm J.; Aspinall, Michael D.; Cave, Francis D.; Lavietes, Anthony D.

2012-08-01

Pulse-shape discrimination (PSD) in fast, organic scintillation detectors is a long-established technique used to separate neutrons and γ rays in mixed radiation fields. In the analogue domain the method can achieve separation in real time, but all knowledge of the pulses themselves is lost thereby preventing the possibility of any post- or repeated analysis. Also, it is typically reliant on electronic systems that are largely obsolete and which require significant experience to set up. In the digital domain, PSD is often more flexible but significant post-processing has usually been necessary to obtain neutron/γ-ray separation. Moreover, the scintillation media on which the technique relies usually have a low flashpoint and are thus deemed hazardous. This complicates the ease with which they are used in industrial applications. In this paper, results obtained with a new portable digital pulse-shape discrimination instrument are described. This instrument provides real-time, digital neutron/γ-ray separation whilst preserving the synchronization with the time-of-arrival for each event, and realizing throughputs of 3 × 106 events per second. Furthermore, this system has been tested with a scintillation medium that is non-flammable and not hazardous.

Derivation of planetary topography using multi-image shape-from-shading

USGS Publications Warehouse

Lohse, V.; Heipke, C.; Kirk, R.L.

2006-01-01

In many cases, the derivation of high-resolution digital terrain models (DTMs) from planetary surfaces using conventional digital image matching is a problem. The matching methods need at least one stereo pair of images with sufficient texture. However, many space missions provide only a few stereo images and planetary surfaces often possess insufficient texture. This paper describes a method for the generation of high-resolution DTMs from planetary surfaces, which has the potential to overcome the described problem. The suggested method, developed by our group, is based on shape-from-shading using an arbitrary number of digital optical images, and is termed "multi-image shape-from-shading" (MI-SFS). The paper contains an explanation of the theory of MI-SFS, followed by a presentation of current results, which were obtained using images from NASA's lunar mission Clementine, and constitute the first practical application with our method using extraterrestrial imagery. The lunar surface is reconstructed under the assumption of different kinds of reflectance models (e.g. Lommel-Seeliger and Lambert). The represented results show that the derivation of a high-resolution DTM of real digital planetary images by means of MI-SFS is feasible. ?? 2006 Elsevier Ltd. All rights reserved.

Improvement of the energy resolution via an optimized digital signal processing in GERDA Phase I

NASA Astrophysics Data System (ADS)

Agostini, M.; Allardt, M.; Bakalyarov, A. M.; Balata, M.; Barabanov, I.; Barros, N.; Baudis, L.; Bauer, C.; Becerici-Schmidt, N.; Bellotti, E.; Belogurov, S.; Belyaev, S. T.; Benato, G.; Bettini, A.; Bezrukov, L.; Bode, T.; Borowicz, D.; Brudanin, V.; Brugnera, R.; Budjáš, D.; Caldwell, A.; Cattadori, C.; Chernogorov, A.; D'Andrea, V.; Demidova, E. V.; Vacri, A. di; Domula, A.; Doroshkevich, E.; Egorov, V.; Falkenstein, R.; Fedorova, O.; Freund, K.; Frodyma, N.; Gangapshev, A.; Garfagnini, A.; Grabmayr, P.; Gurentsov, V.; Gusev, K.; Hegai, A.; Heisel, M.; Hemmer, S.; Heusser, G.; Hofmann, W.; Hult, M.; Inzhechik, L. V.; Janicskó Csáthy, J.; Jochum, J.; Junker, M.; Kazalov, V.; Kihm, T.; Kirpichnikov, I. V.; Kirsch, A.; Klimenko, A.; Knöpfle, K. T.; Kochetov, O.; Kornoukhov, V. N.; Kuzminov, V. V.; Laubenstein, ********************M.; Lazzaro, A.; Lebedev, V. I.; Lehnert, B.; Liao, H. Y.; Lindner, M.; Lippi, I.; Lubashevskiy, A.; Lubsandorzhiev, B.; Lutter, G.; Macolino, C.; Majorovits, B.; Maneschg, W.; Medinaceli, E.; Misiaszek, M.; Moseev, P.; Nemchenok, I.; Palioselitis, D.; Panas, K.; Pandola, L.; Pelczar, K.; Pullia, A.; Riboldi, S.; Rumyantseva, N.; Sada, C.; Salathe, M.; Schmitt, C.; Schneider, B.; Schönert, S.; Schreiner, J.; Schütz, A.-K.; Schulz, O.; Schwingenheuer, B.; Selivanenko, O.; Shirchenko, M.; Simgen, H.; Smolnikov, A.; Stanco, L.; Stepaniuk, M.; Ur, C. A.; Vanhoefer, L.; Vasenko, A. A.; Veresnikova, A.; von Sturm, K.; Wagner, V.; Walter, M.; Wegmann, A.; Wester, T.; Wilsenach, H.; Wojcik, M.; Yanovich, E.; Zavarise, P.; Zhitnikov, I.; Zhukov, S. V.; Zinatulina, D.; Zuber, K.; Zuzel, G.

2015-06-01

An optimized digital shaping filter has been developed for the Gerda experiment which searches for neutrinoless double beta decay in Ge. The Gerda Phase I energy calibration data have been reprocessed and an average improvement of 0.3 keV in energy resolution (FWHM) corresponding to 10 % at the value for decay in Ge is obtained. This is possible thanks to the enhanced low-frequency noise rejection of this Zero Area Cusp (ZAC) signal shaping filter.

Analogue step-by-step DC component eliminator for 24-hour PPG signal monitoring.

PubMed

Pilt, Kristjan; Meigas, Kalju; Lass, Jaanus; Rosmann, Mart; Kaik, Jüri

2007-01-01

For applications where PPG signal AC component needs to be measured without disturbances in its shape and recorded digitally with high digitalization accuracy, the step-by-step DC component eliminator is developed. This paper describes step-by-step DC component eliminator, which is utilized with analogue comparator and operational amplifier. It allows to record PPG signal without disturbances in its shape in 24-hours PPG signal monitoring system. The experiments with PPG signal have been carried out.

19 CFR 12.104 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... because of its distinctive characteristics, comparative rarity, or its contribution to the knowledge of... designs and manufactured articles decorated by hand); (ii) Original works of statuary art and sculpture in...

19 CFR 12.104 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... because of its distinctive characteristics, comparative rarity, or its contribution to the knowledge of... designs and manufactured articles decorated by hand); (ii) Original works of statuary art and sculpture in...

19 CFR 12.104 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... because of its distinctive characteristics, comparative rarity, or its contribution to the knowledge of... designs and manufactured articles decorated by hand); (ii) Original works of statuary art and sculpture in...

19 CFR 12.104 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... because of its distinctive characteristics, comparative rarity, or its contribution to the knowledge of... designs and manufactured articles decorated by hand); (ii) Original works of statuary art and sculpture in...

19 CFR 12.104 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... because of its distinctive characteristics, comparative rarity, or its contribution to the knowledge of... designs and manufactured articles decorated by hand); (ii) Original works of statuary art and sculpture in...

Center for Creative Studies, Detroit

ERIC Educational Resources Information Center

AIA Journal, 1976

1976-01-01

One of the ten buildings chosen to receive 1976 AIA honor awards, the arts center houses the departments of sculpture, painting, graphics, advertising art, photography, and industrial design. (Author/MLF)

Capturing the Surface Texture and Shape of Pollen: A Comparison of Microscopy Techniques

PubMed Central

Sivaguru, Mayandi; Mander, Luke; Fried, Glenn; Punyasena, Surangi W.

2012-01-01

Research on the comparative morphology of pollen grains depends crucially on the application of appropriate microscopy techniques. Information on the performance of microscopy techniques can be used to inform that choice. We compared the ability of several microscopy techniques to provide information on the shape and surface texture of three pollen types with differing morphologies. These techniques are: widefield, apotome, confocal and two-photon microscopy (reflected light techniques), and brightfield and differential interference contrast microscopy (DIC) (transmitted light techniques). We also provide a first view of pollen using super-resolution microscopy. The three pollen types used to contrast the performance of each technique are: Croton hirtus (Euphorbiaceae), Mabea occidentalis (Euphorbiaceae) and Agropyron repens (Poaceae). No single microscopy technique provided an adequate picture of both the shape and surface texture of any of the three pollen types investigated here. The wavelength of incident light, photon-collection ability of the optical technique, signal-to-noise ratio, and the thickness and light absorption characteristics of the exine profoundly affect the recovery of morphological information by a given optical microscopy technique. Reflected light techniques, particularly confocal and two-photon microscopy, best capture pollen shape but provide limited information on very fine surface texture. In contrast, transmitted light techniques, particularly differential interference contrast microscopy, can resolve very fine surface texture but provide limited information on shape. Texture comprising sculptural elements that are spaced near the diffraction limit of light (∼250 nm; NDL) presents an acute challenge to optical microscopy. Super-resolution structured illumination microscopy provides data on the NDL texture of A. repens that is more comparable to textural data from scanning electron microscopy than any other optical microscopy technique investigated here. Maximizing the recovery of morphological information from pollen grains should lead to more robust classifications, and an increase in the taxonomic precision with which ancient vegetation can be reconstructed. PMID:22720050

Normalisation in Flux: Teachers' and Learners' Digital Literacy in the Japanese University Context

ERIC Educational Resources Information Center

Bieri, Thomas E.; Elliott, Darren

2017-01-01

Although subsequent research suggests a more nuanced reality, Prensky's (2001) concept of the digital native remains a compelling and influential metaphor, continuing to shape thinking in education and beyond. This paper addresses self-reported digital literacy of 54 teachers and 477 learners in Japanese tertiary education. An online survey was…

Digital Doctorates? An Exploratory Study of PhD Candidates' Use of Online Tools

ERIC Educational Resources Information Center

Dowling, Robyn; Wilson, Michael

2017-01-01

Online environments are transforming learning, including doctoral education. Yet the ways in which the PhD experience is shaped and transformed through these digital modes of engagement is seldom addressed, and not systematically understood. In this article, we explore PhD students' perceptions and use of digital tools. Drawing on the results of…

Should You? May You? Can You? Factors in Selecting Rare Books and Special Collections for Digitization

ERIC Educational Resources Information Center

Gertz, Janet

2013-01-01

Selection for digitization is about more than which items to scan. Selection is what shapes the online collections that are built by libraries, archives, historical societies, and other cultural heritage institutions. By selecting well, institutions can concentrate on the parts of their collections that are best suited to digitization, that make…

Shaping the Values of Youth: Sunday School Books in 19th Century America

Science.gov Websites

develop accessible digital/electronic collections, unfortunately, not all are. The MSU Libraries are able to provide remediated, accessible versions of digital/electronic library documents to library users

It's in the Bag!

ERIC Educational Resources Information Center

Renfro, Nancy

1983-01-01

Thirteen ideas for using paper bags for class art activities are given. Directions for making bag barracudas, bionic bags, bigfoot bags, bag sculptures, bag beads, and body bag superstars are included. (PP)

CAD/CAM transtibial prosthetic sockets from central fabrication facilities: How accurate are they?

PubMed Central

Sanders, Joan E.; Rogers, Ellen L.; Sorenson, Elizabeth A.; Lee, Gregory S.; Abrahamson, Daniel C.

2014-01-01

This research compares transtibial prosthetic sockets made by central fabrication facilities with their corresponding American Academy of Orthotists and Prosthetists (AAOP) electronic shape files and assesses the central fabrication process. We ordered three different socket shapes from each of 10 manufacturers. Then we digitized the sockets using a very accurate custom mechanical digitizer. Results showed that quality varied considerably among the different manufacturers. Four of the companies consistently made sockets within +/−1.1% volume (approximately 1 sock ply) of the AAOP electronic shape file, while six other companies did not. Six of the companies showed consistent undersizing or oversizing in their sockets, which suggests a consistent calibration or manufacturing error. Other companies showed inconsistent sizing or shape distortion, a difficult problem that represents a most challenging limitation for central fabrication facilities. PMID:18247236

Application of comparative digital holography for distant shape control

NASA Astrophysics Data System (ADS)

Baumbach, Torsten; Osten, Wolfgang; von Kopylow, Christoph; Juptner, Werner P. O.

2004-09-01

The comparison of two objects is of great importance in the industrial production process. Especially comparing the shape is of particular interest for maintaining calibration tools or controlling the tolerance in the deviation between a sample and a master. Outsourcing and globalization of production places can result in large distances between co-operating partners and might cause problems for maintaining quality standards. Consequently new challenges arise for optical measurement techniques especially in the field of industrial shape control. In this paper we describe the progress of implementing a novel technique for comparing directly two objects with different microstructure. The technique is based on the combination of comparative holography and digital holography. Comparing the objects can be done in two ways. One is the digital comparison in the computer and the other way is by using the analogue reconstruction of a master hologram with a spatial light modulator (SLM) as coherent mask for illuminating the test object. Since this mask is stored digitally it can be transmitted via telecommunication networks and this enables the access to the full optical information of the master object at any place wanted. Beside the basic principle of comparative digital holography (CDH), we will show in this paper the set-up for doing the analogue comparison of two objects with increased sensitivity in comparison to former measurements and the calibration of the SLM that is used for the experiments. We will give examples for the digital and the analogue comparison of objects including a verification of our results by another optical measurement technique.

Agreement in the determination of preformed wire shape templates on plaster models and customized digital arch form diagrams on digital models.

PubMed

Camardella, Leonardo Tavares; Sá, Maiara da Silva Bezerra; Guimarães, Luciana Campos; Vilella, Beatriz de Souza; Vilella, Oswaldo de Vasconcellos

2018-03-01

The aim of this study was to verify the accuracy of preformed wire shape templates on plaster models and those of customized digital arch form diagrams on digital models. Twenty pairs of dental plaster models were randomly selected from the archives of the Department of Orthodontics of Federal Fluminense University, Niterói, Rio de Janeiro, Brazil. All plaster model samples were scanned in a plaster model scanner to create the respective digital models. Three examiners defined the arch form on the mandibular arch of these models by selecting the ideal preformed wire shape template on each plaster model or by making a customized digital arch form on the digital models using a digital arch form customization tool. These 2 arch forms were superimposed by the best-fit method. The greatest differences in the 6 regions on the superimposed arches were evaluated. Each examiner presented a descriptive analysis with the means, standard deviation, and minimum and maximum intervals of the differences on the superimpositions. Intraclass correlation coefficient and paired t tests were used to evaluate the accuracy of the superimpositions. Among the 6 regions analyzed in the superimpositions, the largest differences in the anterior and premolar regions were considered clinically insignificant, whereas the largest differences in the right molar region, especially the second molar area, were considered clinically significant by all 3 examiners. The intraclass correlation coefficients showed a weak correlation in the premolar region and moderate correlations in the anterior and molar regions. The paired t test showed statistically significant differences in the left anterior and premolar regions. The superimpositions between the arch forms on plaster and digital models were considered accurate, and the differences were not clinically significant, with the exception of the second molar area. Despite the favorable results, the requirement of correcting some software problems may hamper the transition from plaster to digital models. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Online Farsi digit recognition using their upper half structure

NASA Astrophysics Data System (ADS)

Ghods, Vahid; Sohrabi, Mohammad Karim

2015-03-01

In this paper, we investigated the efficiency of upper half Farsi numerical digit structure. In other words, half of data (upper half of the digit shapes) was exploited for the recognition of Farsi numerical digits. This method can be used for both offline and online recognition. Half of data is more effective in speed process, data transfer and in this application accuracy. Hidden Markov model (HMM) was used to classify online Farsi digits. Evaluation was performed by TMU dataset. This dataset contains more than 1200 samples of online handwritten Farsi digits. The proposed method yielded more accuracy in recognition rate.

[Precision of digital impressions with TRIOS under simulated intraoral impression taking conditions].

PubMed

Yang, Xin; Sun, Yi-fei; Tian, Lei; Si, Wen-jie; Feng, Hai-lan; Liu, Yi-hong

2015-02-18

To evaluate the precision of digital impressions taken under simulated clinical impression taking conditions with TRIOS and to compare with the precision of extraoral digitalizations. Six #14-#17 epoxy resin dentitions with extracted #16 tooth preparations embedded were made. For each artificial dentition, (1)a silicone rubber impression was taken with individual tray, poured with type IV plaster,and digitalized with 3Shape D700 model scanner for 10 times; (2) fastened to a dental simulator, 10 digital impressions for each were taken with 3Shape TRIOS intraoral scanner. To assess the precision, best-fit algorithm and 3D comparison were conducted between repeated scan models pairwise by Geomagic Qualify 12.0, exported as averaged errors (AE) and color-coded diagrams. Non-parametric analysis was performed to compare the precisions of digital impressions and model images. The color-coded diagrams were used to show the deviations distributions. The mean of AE for digital impressions was 7.058 281 μm, which was greater than that of 4.092 363 μm for the model images (P<0.05). However, the means and medians of AE for digital impressions were no more than 10 μm, which meant that the consistency between the digital impressions was good. The deviations distribution was uniform in the model images,while nonuniform in the digital impressions with greater deviations lay mainly around the shoulders and interproximal surfaces. Digital impressions with TRIOS are of good precision and up to the clinical standard. Shoulders and interproximal surfaces scanning are more difficult.

Evaluation of the accuracy of 7 digital scanners: An in vitro analysis based on 3-dimensional comparisons.

PubMed

Renne, Walter; Ludlow, Mark; Fryml, John; Schurch, Zach; Mennito, Anthony; Kessler, Ray; Lauer, Abigail

2017-07-01

As digital impressions become more common and more digital impression systems are released onto the market, it is essential to systematically and objectively evaluate their accuracy. The purpose of this in vitro study was to evaluate and compare the trueness and precision of 6 intraoral scanners and 1 laboratory scanner in both sextant and complete-arch scenarios. Furthermore, time of scanning was evaluated and correlated with trueness and precision. A custom complete-arch model was fabricated with a refractive index similar to that of tooth structure. Seven digital impression systems were used to scan the custom model for both posterior sextant and complete arch scenarios. Analysis was performed using 3-dimensional metrology software to measure discrepancies between the master model and experimental casts. Of the intraoral scanners, the Planscan was found to have the best trueness and precision while the 3Shape Trios was found to have the poorest for sextant scanning (P<.001). The order of trueness for complete arch scanning was as follows: 3Shape D800 >iTero >3Shape TRIOS 3 >Carestream 3500 >Planscan >CEREC Omnicam >CEREC Bluecam. The order of precision for complete-arch scanning was as follows: CS3500 >iTero >3Shape D800 >3Shape TRIOS 3 >CEREC Omnicam >Planscan >CEREC Bluecam. For the secondary outcome evaluating the effect time has on trueness and precision, the complete- arch scan time was highly correlated with both trueness (r=0.771) and precision (r=0.771). For sextant scanning, the Planscan was found to be the most precise and true scanner. For complete-arch scanning, the 3Shape Trios was found to have the best balance of speed and accuracy. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

The Impact of Digital Tools on Student Writing and How Writing Is Taught in Schools

ERIC Educational Resources Information Center

Purcell, Kristen; Buchanan, Judy; Friedrich, Linda

2013-01-01

A survey of 2,462 Advanced Placement (AP) and National Writing Project (NWP) teachers finds that digital technologies are shaping student writing in myriad ways and have also become helpful tools for teaching writing to middle and high school students. These teachers see the internet and digital technologies such as social networking sites, cell…

The Digital Natives Are Restless: Inspiring a New Generation of Learners

ERIC Educational Resources Information Center

Rudi, Alan

2012-01-01

The current crop of "digital natives"--kids born into a world of modern technology--has been immersed in a world of video games, computers, digital music players, and cell phones from an early age. Shaped by the Internet, Google searches, and instant messaging, they can't imagine life without technology. Theirs is a vastly different world from…

Socio-Semiotic Patterns in Digital Meaning-Making: Semiotic Choice as Indicator of Communicative Experience

ERIC Educational Resources Information Center

Sofkova Hashemi, Sylvana

2017-01-01

Access to digital technology in the classroom enables the composition and organization of ideas on screen with a variety of semiotic systems of different modes and media. This study explores patterns of communication and preference of design in digital meaning-making of twelve 7-8 years old students. Meanings were shaped in complex uses and…

A pulse-shape discrimination method for improving Gamma-ray spectrometry based on a new digital shaping filter

NASA Astrophysics Data System (ADS)

Qin, Zhang-jian; Chen, Chuan; Luo, Jun-song; Xie, Xing-hong; Ge, Liang-quan; Wu, Qi-fan

2018-04-01

It is a usual practice for improving spectrum quality by the mean of designing a good shaping filter to improve signal-noise ratio in development of nuclear spectroscopy. Another method is proposed in the paper based on discriminating pulse-shape and discarding the bad pulse whose shape is distorted as a result of abnormal noise, unusual ballistic deficit or bad pulse pile-up. An Exponentially Decaying Pulse (EDP) generated in nuclear particle detectors can be transformed into a Mexican Hat Wavelet Pulse (MHWP) and the derivation process of the transform is given. After the transform is performed, the baseline drift is removed in the new MHWP. Moreover, the MHWP-shape can be discriminated with the three parameters: the time difference between the two minima of the MHWP, and the two ratios which are from the amplitude of the two minima respectively divided by the amplitude of the maximum in the MHWP. A new type of nuclear spectroscopy was implemented based on the new digital shaping filter and the Gamma-ray spectra were acquired with a variety of pulse-shape discrimination levels. It had manifested that the energy resolution and the peak-Compton ratio were both improved after the pulse-shape discrimination method was used.

Shape priors for segmentation of the cervix region within uterine cervix images

NASA Astrophysics Data System (ADS)

Lotenberg, Shelly; Gordon, Shiri; Greenspan, Hayit

2008-03-01

The work focuses on a unique medical repository of digital Uterine Cervix images ("Cervigrams") collected by the National Cancer Institute (NCI), National Institute of Health, in longitudinal multi-year studies. NCI together with the National Library of Medicine is developing a unique web-based database of the digitized cervix images to study the evolution of lesions related to cervical cancer. Tools are needed for the automated analysis of the cervigram content to support the cancer research. In recent works, a multi-stage automated system for segmenting and labeling regions of medical and anatomical interest within the cervigrams was developed. The current paper concentrates on incorporating prior-shape information in the cervix region segmentation task. In accordance with the fact that human experts mark the cervix region as circular or elliptical, two shape models (and corresponding methods) are suggested. The shape models are embedded within an active contour framework that relies on image features. Experiments indicate that incorporation of the prior shape information augments previous results.

The generation and use of numerical shape models for irregular Solar System objects

NASA Technical Reports Server (NTRS)

Simonelli, Damon P.; Thomas, Peter C.; Carcich, Brian T.; Veverka, Joseph

1993-01-01

We describe a procedure that allows the efficient generation of numerical shape models for irregular Solar System objects, where a numerical model is simply a table of evenly spaced body-centered latitudes and longitudes and their associated radii. This modeling technique uses a combination of data from limbs, terminators, and control points, and produces shape models that have some important advantages over analytical shape models. Accurate numerical shape models make it feasible to study irregular objects with a wide range of standard scientific analysis techniques. These applications include the determination of moments of inertia and surface gravity, the mapping of surface locations and structural orientations, photometric measurement and analysis, the reprojection and mosaicking of digital images, and the generation of albedo maps. The capabilities of our modeling procedure are illustrated through the development of an accurate numerical shape model for Phobos and the production of a global, high-resolution, high-pass-filtered digital image mosaic of this Martian moon. Other irregular objects that have been modeled, or are being modeled, include the asteroid Gaspra and the satellites Deimos, Amalthea, Epimetheus, Janus, Hyperion, and Proteus.

Selective microenvironmental effects play a role in shaping genetic diversity and structure in a Phaseolus vulgaris L. landrace: implications for on-farm conservation.

PubMed

Tiranti, B; Negri, V

2007-12-01

Little is known about the organization of landrace diversity and about the forces that shape and maintain within- and among-landrace population diversity. However, this knowledge is essential for conservation and breeding activities. The first aim of this study was to obtain some insight into how variation has been sculptured within a cultivated environment and to identify the loci that potentially underlie selective effects by using a Phaseolus vulgaris L. landrace case study whose natural and human environment and morpho-physiological traits are known in detail. The second aim of this study was to define an appropriate on-farm conservation strategy which can serve as a model for other populations. The farmers' populations of this threatened landrace were examined with 28 single sequence repeat molecular markers. The landrace appears to be a genetically structured population in which substantial diversity is maintained at the subpopulation level (62% of the total variance). Evidence of locus-specific selective effects was obtained for five of the 13 loci-differentiating subpopulations. Their role is discussed. Our data suggest that a complex interaction of factors (differential microenvironmental selection pressures by farmers and by biotic and abiotic conditions, migration rate and drift) explains the observed pattern of diversity. Appropriate on-farm conservation of a structured landrace requires the maintenance of the entire population.

Let Them Eat Faux Cake

ERIC Educational Resources Information Center

Peace, Suze

2012-01-01

In this article, students create a "faux" cake sculpture. It is a three-dimensional artwork made of paper, colored with markers, and decorated with old marker caps and polystyrene packing peanuts for icing swirls.

Digital pulse-shape analysis with a TRACE early silicon prototype

NASA Astrophysics Data System (ADS)

Mengoni, D.; Dueñas, J. A.; Assié, M.; Boiano, C.; John, P. R.; Aliaga, R. J.; Beaumel, D.; Capra, S.; Gadea, A.; Gonzáles, V.; Gottardo, A.; Grassi, L.; Herrero-Bosch, V.; Houdy, T.; Martel, I.; Parkar, V. V.; Perez-Vidal, R.; Pullia, A.; Sanchis, E.; Triossi, A.; Valiente Dobón, J. J.

2014-11-01

A highly segmented silicon-pad detector prototype has been tested to explore the performance of the digital pulse shape analysis in the discrimination of the particles reaching the silicon detector. For the first time a 200 μm thin silicon detector, grown using an ordinary floating zone technique, has been shown to exhibit a level discrimination thanks to the fine segmentation. Light-charged particles down to few MeV have been separated, including their punch-through. A coaxial HPGe detector in time coincidence has further confirmed the quality of the particle discrimination.

Dynamic characteristics of a wind turbine blade using 3D digital image correlation

NASA Astrophysics Data System (ADS)

Baqersad, Javad; Carr, Jennifer; Lundstrom, Troy; Niezrecki, Christopher; Avitabile, Peter; Slattery, Micheal

2012-04-01

Digital image correlation (DIC) has been becoming increasingly popular as a means to perform structural health monitoring because of its full-field, non-contacting measurement ability. In this paper, 3D DIC techniques are used to identify the mode shapes of a wind turbine blade. The blade containing a handful of optical targets is excited at different frequencies using a shaker as well as a pluck test. The response is recorded using two PHOTRON™ high speed cameras. Time domain data is transferred to the frequency domain to extract mode shapes and natural frequencies using an Operational Modal Approach. A finite element model of the blade is also used to compare the mode shapes. Furthermore, a modal hammer impact test is performed using a more conventional approach with an accelerometer. A comparison of mode shapes from the photogrammetric, finite element, and impact test approaches are presented to show the accuracy of the DIC measurement approach.

Evaluation of bovine hemimandible morphology by means of elliptic Fourier descriptors.

PubMed

Parés-Casanova, Pere M

2014-01-01

The aim of this research was to compare size (area) and shape variations of bovine hemimandibles according to age. Digital photographs were obtained for 34 hemimandibles belonging to different European breeds of cattle. The specimens were classified according to age, as determined by molar eruption: b months ("young", M1 erupting, n = 8), 10 months ("immature", M2 erupting, n = 9) and over 24 months ("adult", M3 fully erupted, n = 17). Captured images were then digitally analysed based on elliptic Fourier descriptors, which mathematically characterise the area and shape. Hemimandibular areas only showed significant differences between the adults (2752.3 cm2 +/- 250.4) and young subjects (2373.8 cm2 +/- 300.2). The areas for each age group were not linked to linear shape modifications, which was the same for all age groups. So, bovine hemimandibular form change is mainly related to size changes. Shape variability is centred on the condylar ramus.

Sexual dimorphism in foramen magnum dimensions in the South Indian population: A digital submentovertex radiographic study.

PubMed

Raikar, Neha Ajit; Meundi, Manasa A; David, Chaya M; Rao, Mahesh Dathu; Jogigowda, Sanjay Chikkarasinakere

2016-01-01

Personal identification is a vital arena of forensic investigation, facilitating the search for missing persons. This process of identification is eased by the determination of age, sex, and ethnicity. In situations where there are fragmented and mutilated skeletal remains, sex determination is relatively difficult, and it becomes important to establish the accuracy of individual bones. This study aims to evaluate sexual dimorphism in foramen magnum (FM) dimensions in the South Indian population using digital submentovertex (SMV) radiograph. 150 individuals (75 males and 75 females) were subjected to digital SMV radiography. FM in the resultant image was assessed for longitudinal and transverse diameters, circumference, and area. Also, one particular shape was assigned to each image based on the classification of Chethan et al . of FM shapes. Three qualified oral radiologists performed all the measurements twice within an interval of 10 days. The values obtained for all four parameters were statistically significant and higher in males than in females. The most common morphology of FM was an egg shape while hexagonal was the least common morphology. Circumference was the best indicator of sex followed by area, transverse diameter, and longitudinal diameter. Having achieved a high accuracy of 67.3% with digital SMV radiograph makes it a reliable and reproducible alternative to dry skulls for sex determination.

Noise-shaping gradient descent-based online adaptation algorithms for digital calibration of analog circuits.

PubMed

Chakrabartty, Shantanu; Shaga, Ravi K; Aono, Kenji

2013-04-01

Analog circuits that are calibrated using digital-to-analog converters (DACs) use a digital signal processor-based algorithm for real-time adaptation and programming of system parameters. In this paper, we first show that this conventional framework for adaptation yields suboptimal calibration properties because of artifacts introduced by quantization noise. We then propose a novel online stochastic optimization algorithm called noise-shaping or ΣΔ gradient descent, which can shape the quantization noise out of the frequency regions spanning the parameter adaptation trajectories. As a result, the proposed algorithms demonstrate superior parameter search properties compared to floating-point gradient methods and better convergence properties than conventional quantized gradient-methods. In the second part of this paper, we apply the ΣΔ gradient descent algorithm to two examples of real-time digital calibration: 1) balancing and tracking of bias currents, and 2) frequency calibration of a band-pass Gm-C biquad filter biased in weak inversion. For each of these examples, the circuits have been prototyped in a 0.5-μm complementary metal-oxide-semiconductor process, and we demonstrate that the proposed algorithm is able to find the optimal solution even in the presence of spurious local minima, which are introduced by the nonlinear and non-monotonic response of calibration DACs.

Reproducibility of the index of orthognathic functional treatment need scores derived from plaster study casts and their three-dimensional digital equivalents: a pilot study.

PubMed

McCrory, Emma; McGuinness, Niall Jp; Ulhaq, Aman

2018-06-01

To determine the reproducibility of Index of Orthognathic Functional Treatment Need (IOFTN) scores derived from plaster casts and their three-dimensional (3D) digital equivalents. Pilot study, prospective analytical. UK hospital orthodontic department. Thirty casts and their digital equivalents, representing the pre-treatment malocclusions of patients requiring orthodontic-orthognathic surgical treatment, were scored by four clinicians using IOFTN. Casts were scanned using a 3Shape digital scanner and 3D models produced using OrthoAnalyzer TM (3Shape Ltd, Copenhagen, Denmark). Examiners independently determined the IOFTN scores for the casts and digital models, to test their inter- and intra-operator reliability using weighted Kappa scores. Intra-operator agreement with IOFTN major categories (1-5: treatment need) was very good for plaster casts (0.83-0.98) and good-very good for digital models (0.78-0.83). Inter-operator agreement was moderate-very good for casts (0.58-0.82) and good-very good for digital models (0.65-0.92). Intra-operator agreement with IOFTN sub-categories (1-14: feature of malocclusion) was good-very good for casts (0.70-0.97) and digital models (0.80-0.94). Inter-operator agreement was moderate-good for casts (0.53-0.77); and moderate-very good for the digital models (0.58-0.90). Digital models are an acceptable alternative to plaster casts for examining the malocclusion of patients requiring combined orthodontic-orthognathic surgical treatment and determining treatment need.

Art for Engineers

ERIC Educational Resources Information Center

Miller, Paul F., Jr.

1971-01-01

Describes a two-semester sequence of a senior elective art class. Emphasized is the discovering and experiencing of the primary esthetic, intrinsic values of a self-imposed, limited medium, such as collage, welded sculpture, or oil painting. (TS)

Potential Hazards of Plastics Used in Sculpture

ERIC Educational Resources Information Center

Siedlecke, Jerome T.

1972-01-01

This paper discusses the thermoplastic and thermosetting resins presently being used by the artist, and the potential for exposure to the toxic chemicals and other hazards during the development of his creative work. (Author)

Plant a Planetary Pennant, and Other Art Projects

ERIC Educational Resources Information Center

Wilcox, Claudia; and others

1970-01-01

Art projects discussed include the creation of outer space flags, painting with wool, making ceramics and sculptures from inexpensive ingredients, constructing cardboard rockets, costume design, and reed representations of flowers and insects. (DB)

The museum of unnatural form: a visual and tactile experience of fractals.

PubMed

Della-Bosca, D; Taylor, R P

2009-01-01

A remarkable computer technology is revolutionizing the world of design, allowing intricate patterns to be created with mathematical precision and then 'printed' as physical objects. Contour crafting is a fabrication process capable of assembling physical structures the sizes of houses, firing the imagination of a new generation of architects and artists (Khoshnevisat, 2008). Daniel Della-Bosca has jumped at this opportunity to create the 'Museum of Unnatural Form' at Griffith University. Della-Bosca's museum is populated with fractals sculptures - his own versions of nature's complex objects - that have been printed with the new technology. His sculptures bridge the historical divide in fractal studies between the abstract images of mathematics and the physical objects of Nature (Mandelbrot, 1982). Four of his fractal images will be featured on the cover of NDPLS in 2009.

Identifying the material of original and restored parts of a 14^{th} century alabaster annunciation group through stable isotopes

NASA Astrophysics Data System (ADS)

Kloppmann, Wolfram; Leroux, Lise; Le Pogam, Pierre-Yves; Bromblet, Philippe

2017-04-01

The origin of raw materials for sculpture is often obscure before the 17th century due to the scarcity of written sources. Identifying this origin provides hints to economic exchanges but also, potentially, allows for attributing sculptures to a specific context of creation (regional workshops, artists). Another challenge for art historians is the identification of restorations and their potential chronology. We present an example of a 14th century group of two statues, made of gypsum alabaster, representing an annunciation group, with the Virgin Mary and the angel Gabriel. Their original position was a near Troyes in the eastern Paris Basin, they are now separated being conserved at the Louvre Museum (Virgin Mary) and the Cleveland Museum of Art (Gabriel). Our multi-isotope study revealed the common origin of the material used for both sculptures, their isotope fingerprints being identical within the analytical error. These fingerprints are highly specific and point to an origin in a historical gypsum and alabaster quarry in the northern part of Provence, France, first mentioned at the end of the 13th century. We were also able to identify an unknown restoration of lower part of the Virgin Mary statue with an optically undistinguishable material, using Tuscan alabaster, most likely in the 19th century. This underlines the potential and usefulness of independent geochemical evidence to underpin stylistic hypotheses on grouping of individual artworks, historical economic relationships between regions and on past restoration activities.

Characteristics of Nd:YAG sculptured contact probes after prolonged laser application.

PubMed

Barroso, E G; Haklin, M F; Staren, E D

1995-01-01

This study analyzed the functional and structural characteristics of cone, hemisphere, and modified sculptured contact fibers (1,000 microns) after 1 hour of continuous Nd:YAG laser application. Continuous laser application was performed on live porcine tissue using 20 watts of power. The fiber's appearance under a microscope as well as the power output was recorded after 0, 5, 10, 20, 30, 45, and 60 minutes of continuous laser application. (N = 3 for each fiber). At time 0, all fibers transmitted from 49 to 56% of the initial 20 watts (W); power transmission decreased to less than 9% relative power transmission after 20 minutes and then plateaued. The fibers exhibited severe distortion and carbonization of the surface where laser had been applied with evidence of quartz melting and shattering after only 10 minutes. By 30 minutes of laser application, all three fibers were fractured and essentially indistinguishable from one another; moreover, the fibers exhibited similar power transmission, and cutting and coagulation activity, as determined by a panel of independent, double-blinded surgeons. These data lead us to conclude that 1) Nd:YAG contact laser effects result from thermal heating of the fiber tip with subsequent tissue injury, 2) the unique structural configuration of the fiber's sculptured tip are lost after several minutes of laser application without appreciable change in functional integrity, and 3) fibers may be manually fractured allowing for multiple uses without significant sacrifice of power transmission or surgical utility.

Black and red granites in the Egyptian Antiquity Museum of Turin. A minero-petrographic and provenance study.

NASA Astrophysics Data System (ADS)

Serra, M.; Borghi, A.; Vaggelli, G.; D'Amicone, E.; Vigna, L.

2009-04-01

The University of Turin, in cooperation with the Egyptian Antiquity Museum, has recently undertaken several projects aimed at developing a scientific approach to the analysis of ancient Egyptian finds. In particular, a straightforward project to investigate the stony handcrafts preserved in the statuary rooms started in 2006 to obtain their systematic petrographic classification and their possible geological sources. The main intent of the project was to understand the provenance of the materials used in Pharaonic period, setting the base for the identification of the ancient quarry sites and for a correct interpretation of the extraction and working techniques, in order to provide fundamental information about economical and social development of Egyptian civilization through historical times. The choice to focus attention on black and red granites came from the statement of the percentage relevance (40 of the 54 sculptures actually exposed) of these materials in the statuary rooms. Moreover, especially for black granites, the need of detailed minero-petrographic analysis arose from the difficulty in making a macroscopic classification of the fine-grained dark-coloured rock varieties. Therefore, five black granite statues, belonging to the Drovetti collection were sampled in a micro-invasive way: three sculptures of goddess Sekhmet (cat. 260, 251, 247), the statue of Ramses II (cat. 1380) and the statue of goddess Hathor (cat. 694). The choice to analyse even three of the twenty-one statues of goddess Sekhmet (cat. 247, cat. 251, cat. 260), originally located in the same Egyptian temple but ichnographically different, derived from the need of answering the archaeological questions about their provenance. On the other hand, the opportunity of studying the fine-grained black rocks used for the sculptures of goddess Hathor (cat. 694) and of Ramses II in Majesty (cat. 1380), symbol of the Egyptian museum of Turin, provided the opportunity to analyse and classify the materials used for two of the best known masterpieces of Egyptian art. As regards to red granites, it has been observed that most of the exposed sculptures were made of rocks closely akin to Aswan granite. Just in one case, the Ram headed sphinx (cat. 836), macroscopic differences in colour index, grain size and isoorientation of feldspar phenocrysts, suggested a different provenance of the source material and determined the choice of picking up a small fragment for minero-petrographic analysis. The sample collected from the sarcophagus of Nefertari (suppl. 5153) during the recent restoration of the sculpture, was analysed in order to test the accuracy of the results, as the provenance of the material used for its realization was already certain. Petrographic observations and chemical analysis were undertaken by a scanning electron microscope equipped with an energy-dispersive spectrometer. Minero-petrographic data primarily showed that all samples vary in composition from granite (red granites) to granodiorite and tonalite (black granites). The main sialic phases are represented by plagioclase (albite to oligoclase), alkali-feldspar (microcline) and quartz, while femic phases are amphibole (green horneblende) and biotite (Fe- to Mg-biotite), always coexisting in variable relative percentages. Minor amount of apatite (≈ 1 wt.%), magnetite, ilmenite, often associated to sphene, zircon, pyrite and allanite also occur. The identification of some compositional markers in all samples suggested a common provenance for all the rocks used for the sculptures. Thus, it was supposed that they could all have been quarried in the famous district of Aswan, well known at least since Dynastic period. This provenance hypothesis was confirmed by geological literature and archeological evidences, considering the relative proximity of Aswan quarries to Nile river and to the key centres of power in the New Kingdom. Therefore, several geological samples were collected in Aswan area, in order to perform a minero - petrographical and geochemical comparison with the rocks of the statues. According to the petrographic and minero-chemical results, it was possible to define the provenance of the granitoids used for the realization of the sculptures and finally to highlight the importance of an archaeometric approach to historical and archaeological problems.

Digital pulse processing in Mössbauer spectroscopy

NASA Astrophysics Data System (ADS)

Veiga, A.; Grunfeld, C. M.

2014-04-01

In this work we present some advances towards full digitization of the detection subsystem of a Mössbauer transmission spectrometer. We show how, using adequate instrumentation, preamplifier output of a proportional counter can be digitized with no deterioration in spectrum quality, avoiding the need of a shaping amplifier. A pipelined architecture is proposed for a digital processor, which constitutes a versatile platform for the development of pulse processing techniques. Requirements for minimization of the analog processing are considered and experimental results are presented.

The Content Dimension of Educational Technology: How Does It Work for Education in Europe?

ERIC Educational Resources Information Center

Cernochova, Miroslava

2012-01-01

The aim of this article is to present a concept of digital content emphasizing its new shape and ways to be developed and shared on Web 2.0 principles. Due to recent EU initiatives, a great number of digital materials, resources, and services for education have been designed and produced in recent years. Digital content from materials such as…

Digital Rise-Time Discrimination of Pulses from the Tigress Integrated Plunger Silicon PIN Diode Wall

NASA Astrophysics Data System (ADS)

Voss, P.; Henderson, R.; Andreoiu, C.; Ashley, R.; Ball, G. C.; Bender, P. C.; Chester, A.; Cross, D. S.; Drake, T. E.; Garnsworthy, A. B.; Hackman, G.; Ketelhut, S.; Krücken, R.; Miller, D.; Rajabali, M. M.; Starosta, K.; Svensson, C. E.; Tardiff, E.; Unsworth, C.; Wang, Z.-M.

Electromagnetic transition rate measurements play an important role in characterizing the evolution of nuclear structure with increasing proton-neutron asymmetry. At TRIUMF, the TIGRESS Integrated Plunger device and its suite of ancillary detector systems have been implemented for charged-particle tagging and light-ion identification in coincidence with gamma-ray spectroscopy for Doppler-shift lifetime studies and low-energy Coulomb excitation measurements. Digital pulse-shape analysis of signals from these ancillary detectors for particle identification improves the signal-to-noise ratio of gamma-ray energy spectra. Here, we illustrate the reaction-channel selectivity achieved by utilizing digital rise-time discrimination of waveforms from alpha particles and carbon ions detected with silicon PIN diodes, thereby enhancing gamma-ray line-shape signatures for precision lifetime studies.

References and benchmarks for pore-scale flow simulated using micro-CT images of porous media and digital rocks

NASA Astrophysics Data System (ADS)

Saxena, Nishank; Hofmann, Ronny; Alpak, Faruk O.; Berg, Steffen; Dietderich, Jesse; Agarwal, Umang; Tandon, Kunj; Hunter, Sander; Freeman, Justin; Wilson, Ove Bjorn

2017-11-01

We generate a novel reference dataset to quantify the impact of numerical solvers, boundary conditions, and simulation platforms. We consider a variety of microstructures ranging from idealized pipes to digital rocks. Pore throats of the digital rocks considered are large enough to be well resolved with state-of-the-art micro-computerized tomography technology. Permeability is computed using multiple numerical engines, 12 in total, including, Lattice-Boltzmann, computational fluid dynamics, voxel based, fast semi-analytical, and known empirical models. Thus, we provide a measure of uncertainty associated with flow computations of digital media. Moreover, the reference and standards dataset generated is the first of its kind and can be used to test and improve new fluid flow algorithms. We find that there is an overall good agreement between solvers for idealized cross-section shape pipes. As expected, the disagreement increases with increase in complexity of the pore space. Numerical solutions for pipes with sinusoidal variation of cross section show larger variability compared to pipes of constant cross-section shapes. We notice relatively larger variability in computed permeability of digital rocks with coefficient of variation (of up to 25%) in computed values between various solvers. Still, these differences are small given other subsurface uncertainties. The observed differences between solvers can be attributed to several causes including, differences in boundary conditions, numerical convergence criteria, and parameterization of fundamental physics equations. Solvers that perform additional meshing of irregular pore shapes require an additional step in practical workflows which involves skill and can introduce further uncertainty. Computation times for digital rocks vary from minutes to several days depending on the algorithm and available computational resources. We find that more stringent convergence criteria can improve solver accuracy but at the expense of longer computation time.

Discriminant Analysis of Defective and Non-Defective Field Pea (Pisum sativum L.) into Broad Market Grades Based on Digital Image Features.

PubMed

McDonald, Linda S; Panozzo, Joseph F; Salisbury, Phillip A; Ford, Rebecca

2016-01-01

Field peas (Pisum sativum L.) are generally traded based on seed appearance, which subjectively defines broad market-grades. In this study, we developed an objective Linear Discriminant Analysis (LDA) model to classify market grades of field peas based on seed colour, shape and size traits extracted from digital images. Seeds were imaged in a high-throughput system consisting of a camera and laser positioned over a conveyor belt. Six colour intensity digital images were captured (under 405, 470, 530, 590, 660 and 850nm light) for each seed, and surface height was measured at each pixel by laser. Colour, shape and size traits were compiled across all seed in each sample to determine the median trait values. Defective and non-defective seed samples were used to calibrate and validate the model. Colour components were sufficient to correctly classify all non-defective seed samples into correct market grades. Defective samples required a combination of colour, shape and size traits to achieve 87% and 77% accuracy in market grade classification of calibration and validation sample-sets respectively. Following these results, we used the same colour, shape and size traits to develop an LDA model which correctly classified over 97% of all validation samples as defective or non-defective.

Discriminant Analysis of Defective and Non-Defective Field Pea (Pisum sativum L.) into Broad Market Grades Based on Digital Image Features

PubMed Central

McDonald, Linda S.; Panozzo, Joseph F.; Salisbury, Phillip A.; Ford, Rebecca

2016-01-01

Field peas (Pisum sativum L.) are generally traded based on seed appearance, which subjectively defines broad market-grades. In this study, we developed an objective Linear Discriminant Analysis (LDA) model to classify market grades of field peas based on seed colour, shape and size traits extracted from digital images. Seeds were imaged in a high-throughput system consisting of a camera and laser positioned over a conveyor belt. Six colour intensity digital images were captured (under 405, 470, 530, 590, 660 and 850nm light) for each seed, and surface height was measured at each pixel by laser. Colour, shape and size traits were compiled across all seed in each sample to determine the median trait values. Defective and non-defective seed samples were used to calibrate and validate the model. Colour components were sufficient to correctly classify all non-defective seed samples into correct market grades. Defective samples required a combination of colour, shape and size traits to achieve 87% and 77% accuracy in market grade classification of calibration and validation sample-sets respectively. Following these results, we used the same colour, shape and size traits to develop an LDA model which correctly classified over 97% of all validation samples as defective or non-defective. PMID:27176469

A Tactile Stimulator for Studying Passive Shape Perception

PubMed Central

Lane, John W.; Fitzgerald, Paul J.; Yau, Jeffrey M.; Pembeci, Izzet; Hsiao, Steven S.

2009-01-01

We describe a computer-controlled tactile stimulator for use in human psychophysical and monkey neurophysiological studies of 3-D shape perception. The stimulator is constructed primarily of commercially available parts, as well as a few custom-built pieces for which we will supply diagrams upon request. There are two components to the stimulator: a tactile component and a hand positioner component. The tactile component consists of multiple stimulating units that move about in a Cartesian plane above the restrained hand. Each stimulating unit contains a servo-controlled linear motor with an attached small rotary stepper motor, allowing arbitrary stimulus shapes to contact the skin through vibration, static indentation, or scanning. The hand positioner component modifies the conformation of the restrained hand through a set of mechanical linkages under motorized control. The present design controls the amount of spread between digits two and three, the spread between digits four and three, and the degree to which digit three is flexed or extended, thereby simulating different conformations of the hand in contact with objects. This design is easily modified to suit the needs of the experimenter. Because the two components of the stimulator are independently controlled, the stimulator allows for parametric study of the mechanoreceptive and proprioceptive contributions to 3-D tactile shape perception. PMID:19800916

Algorithmic psychometrics and the scalable subject.

PubMed

Stark, Luke

2018-04-01

Recent public controversies, ranging from the 2014 Facebook 'emotional contagion' study to psychographic data profiling by Cambridge Analytica in the 2016 American presidential election, Brexit referendum and elsewhere, signal watershed moments in which the intersecting trajectories of psychology and computer science have become matters of public concern. The entangled history of these two fields grounds the application of applied psychological techniques to digital technologies, and an investment in applying calculability to human subjectivity. Today, a quantifiable psychological subject position has been translated, via 'big data' sets and algorithmic analysis, into a model subject amenable to classification through digital media platforms. I term this position the 'scalable subject', arguing it has been shaped and made legible by algorithmic psychometrics - a broad set of affordances in digital platforms shaped by psychology and the behavioral sciences. In describing the contours of this 'scalable subject', this paper highlights the urgent need for renewed attention from STS scholars on the psy sciences, and on a computational politics attentive to psychology, emotional expression, and sociality via digital media.

78 FR 19564 - Notice of Meeting of the Cultural Property Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

... the Imposition of Import Restrictions on Categories of Archaeological Material from the Paleolithic Period Through the Tang Dynasty and Monumental Sculpture and Wall Art At Least 250 Years Old (``MOU...

Fiber Fantasy World.

ERIC Educational Resources Information Center

Malsam, Margaret

1980-01-01

Under the guidance of an artist-in-residence, students at Stuckey Elementary transformed a corner of their library/media center into a fantasy reading nook with soft sculpture fabric landscapes, and foam furniture designed to look like clouds. (Author/SJL)

Plaster-Wrap Dragons

ERIC Educational Resources Information Center

Vance, Shelly

2012-01-01

In this article, the author describes how her students constructed a three-dimensional sculpture of a dragon using plaster wrap and other materials. The dragons were formed from modest means--using only a toilet-paper tube, newsprint, tape and wire.

36. NORTH AND EAST SIDES OF MAIN STAIR HALL SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. NORTH AND EAST SIDES OF MAIN STAIR HALL SHOWING STAIRWAY, NORTH SCULPTURE PANEL, AND CEILING VAULT; LOOKING NORTHEAST (Harms & Wieskamp) - Dairy Industry Building, Iowa State University campus, Ames, Story County, IA

Moving Along: Sporting Clay.

ERIC Educational Resources Information Center

Hiller, Peter

2002-01-01

Presents a junior high school student art project where three-dimensional art sculptures of surfing, snow boarding, or dirt biking were created. Discusses how the students created their three-dimensional works of art using a clay-slab technique. (CMK)

The Role of the Expressive Arts in Therapy.

ERIC Educational Resources Information Center

Creadick, Theo Alcott

1985-01-01

Components of the expressive arts approach to therapy for disabled students are briefly described in terms of music, movement and dance, sculpture, sandplay, drawing and painting, journal writing, poetry, playwriting, puppetry, and drama. (CL)

A Plastic Menagerie

ERIC Educational Resources Information Center

Hadley, Mary Jane

2010-01-01

Bobble heads had become quite popular, depicting all sorts of sports figures, animals, and even presidents. In this article, the author describes how her fourth graders made bobble head sculptures out of empty plastic drink bottles. (Contains 1 online resource.)

Multiwavelength digital holography for polishing tool shape measurement

NASA Astrophysics Data System (ADS)

Lédl, Vít.; Psota, Pavel; Václavík, Jan; Doleček, Roman; Vojtíšek, Petr

2013-09-01

Classical mechano-chemical polishing is still a valuable technique, which gives unbeatable results for some types of optical surfaces. For example, optics for high power lasers requires minimized subsurface damage, very high cosmetic quality, and low mid spatial frequency error. One can hardly achieve this with use of subaperture polishing. The shape of the polishing tool plays a crucial role in achieving the required form of the optical surface. Often the shape of the polishing tool or pad is not known precisely enough during the manufacturing process. The tool shape is usually premachined and later is changed during the polishing procedure. An experienced worker could estimate the shape of the tool indirectly from the shape of the polished element, and that is why he can achieve the required shape in few reasonably long iterative steps. Therefore the lack of the exact tool shape knowledge is tolerated. Sometimes, this indirect method is not feasible even if small parts are considered. Moreover, if processes on machines like planetary (continuous) polishers are considered, the incorrect shape of the polishing pad could extend the polishing times extremely. Every iteration step takes hours. Even worse, polished piece could be wasted if the pad has a poor shape. The ability of the tool shape determination would be very valuable in those types of lengthy processes. It was our primary motivation to develop a contactless measurement method for large diffusive surfaces and demonstrate its usability. The proposed method is based on application of multiwavelength digital holographic interferometry with phase shift.

Shaping non-diffracting beams with a digital micromirror device

NASA Astrophysics Data System (ADS)

Ren, Yu-Xuan; Fang, Zhao-Xiang; Lu, Rong-De

2016-02-01

The micromechanical digital micromirror device (DMD) performs as a spatial light modulator to shape the light wavefront. Different from the liquid crystal devices, which use the birefringence to modulate the light wave, the DMD regulates the wavefront through an amplitude modulation with the digitally controlled mirrors switched on and off. The advantages of such device are the fast speed, polarization insensitivity, and the broadband modulation ability. The fast switching ability for the DMD not only enables the shaping of static light mode, but also could dynamically compensate for the wavefront distortion due to scattering medium. We have employed such device to create the higher order modes, including the Laguerre-Gaussian, Hermite-Gaussian, as well as Mathieu modes. There exists another kind of beam with shape-preservation against propagation, and self-healing against obstacles. Representative modes are the Bessel modes, Airy modes, and the Pearcey modes. Since the DMD modulates the light intensity, a series of algorithms are developed to calculate proper amplitude hologram for shaping the light. The quasi-continuous gray scale images could imitate the continuous amplitude hologram, while the binary amplitude modulation is another means to create the modulation pattern for a steady light field. We demonstrate the generation of the non-diffracting beams with the binary amplitude modulation via the DMD, and successfully created the non-diffracting Bessel beam, Airy beam, and the Pearcey beam. We have characterized the non-diffracting modes through propagation measurements as well as the self-healing measurements.

Isochromatic photoelasticity fringe patterns of PMMA in various shapes and stress applications

NASA Astrophysics Data System (ADS)

Manjit, Y.; Limpichaipanit, A.; Ngamjarurojana, A.

2018-03-01

The research focuses on isochromatic photoelastic fringe patterns in solid materials by using reflection mode in dark field polariscope. The optical setup consists of light source, polarizers, quarter wave plates, 577 nm optical pass filter, compensator and digital camera system. The fringe patterns were produced on the sample and fractional / integer number of fringe order was observed using Babinet compensator and digital camera system. The samples were circular and rectangular shape of PMMA coated with silver spray and compressed by hydraulic system at the top and the bottom. The results of the isochromatic fringe pattern were analyzed in horizontal and vertical positions. It was found that force and the number of isochromatic photoelastic fringe order depended on shape of sample, which reflects stress distribution behavior.

Qualitative skeletal correlates of wing shape in extant birds (Aves: Neoaves).

PubMed

Hieronymus, Tobin L

2015-02-27

Among living fliers (birds, bats, and insects), birds display relatively high aspect ratios, a dimensionless shape variable that distinguishes long and narrow vs. short and broad wings. Increasing aspect ratio results in a functional tradeoff between low induced drag (efficient cruise) and increased wing inertia (difficult takeoff). Given the wide scope of its functional effects, the pattern of aspect ratio evolution is an important factor that contributes to the substantial ecological and phylogenetic diversity of living birds. However, because the feathers that define the wingtip (and hence wingspan and aspect ratio) often do not fossilize, resolution in the pattern of avian wing shape evolution is obscured by missing information. Here I use a comparative approach to investigate the relationship between skeletal proxies of flight feather attachment and wing shape. An accessory lobe of the internal index process of digit II-1, a bony correlate of distal primary attachment, shows weak but statistically significant relationships to aspect ratio and mass independent of other skeletal morphology. The dorsal phalangeal fossae of digit II-1, which house distal primaries VIII and IX, also show a trend of increased prominence with higher aspect ratio. Quill knobs on the ulna are examined concurrently, but do not show consistent signal with respect to wing shape. Although quill knobs are cited as skeletal correlates of flight performance in birds, their relationship to wing shape is inconsistent among extant taxa, and may reflect diverging selection pressures acting on a conserved architecture. In contrast, correlates of distal primary feather attachment on the major digit show convergent responses to increasing aspect ratio. In light of the diversity of musculoskeletal and integumentary mophology that underlies wing shape in different avian clades, it is unlikely that a single skeletal feature will show consistent predictive power across Neoaves. Confident inference of wing shape in basal ornithurine birds will require multiple lines of evidence, together with an understanding of clade-specific evolutionary trends within the crown.

3D Printing of Shape Memory Polymers for Flexible Electronic Devices.

PubMed

Zarek, Matt; Layani, Michael; Cooperstein, Ido; Sachyani, Ela; Cohn, Daniel; Magdassi, Shlomo

2016-06-01

The formation of 3D objects composed of shape memory polymers for flexible electronics is described. Layer-by-layer photopolymerization of methacrylated semicrystalline molten macromonomers by a 3D digital light processing printer enables rapid fabrication of complex objects and imparts shape memory functionality for electrical circuits. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Central fabrication: Carved positive assessment

PubMed Central

Sanders, Joan E; Severance, Michael R; Myers, Timothy R; Ciol, Marcia A

2015-01-01

In this research we investigated the degree of error during the carving phase of central fabrication of prosthetic sockets for people with limb amputation. Three different model shapes were ordered from each of ten central fabrication companies. Using an accurate custom mechanical digitizer and alignment algorithm, we digitized the models and then compared the model shapes with the electronic file shapes. Results showed that 24 of the 30 models had volumes larger than the electronic file shapes while 24 had volumes that were smaller. 29 of the 30 models were oversized at the proximal aspect of the tibial tuberosity and undersized at the patellar tendon and popliteal areas. This error would result in a socket that had less tibial tubercle relief than intended in addition to a larger anterior-posterior dimension than desired. Comparison of the model shapes with socket shapes assessed for nine of the companies in a previous study showed that for five of the companies the sockets were relatively undersized over the tibial crest and fibular head. The results indicate that the socket the prosthetist receives will not always fit as planned, and that errors in the carving process are a source of the discrepancies. PMID:21515893

The School Mummy.

ERIC Educational Resources Information Center

Parent, Ronald G.

1983-01-01

To introduce a secondary school sculpture class to art history, the students created a modern version of an Egyptian mummy of Pariscraft. The mummy was painted in traditional Egyptian colors, but the symbols represented the high school where it was produced. (IS)

North exterior elevation of Pope Quadrangle. Note the bas relief ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

North exterior elevation of Pope Quadrangle. Note the bas relief sculpture over the doorway, which includes the school motto, Aspirando et Perseverando. - Avon Old Farms School, 500 Avon Old Farms Road, Avon, Hartford County, CT

Knight Time.

ERIC Educational Resources Information Center

Stonyk, Richard

1998-01-01

Integrates a lesson on medieval European history with a class art project. Describes how students studied heraldry to design their own coat of arms and produce a relief sculpture shield depicting these arms. Lists materials needed and outlines the process of construction. (DSK)

Dying Star Creates Fantasy-like Sculpture of Gas and Dust

NASA Image and Video Library

2004-09-09

This detailed view of NGC 6543, the Cat Eye Nebula, from NASA Hubble Space Telescope includes intricate structures, including concentric gas shells, jets of high-speed gas, and unusual shock-induced knots of gas.

Discovery of multi-ring basins - Gestalt perception in planetary science

NASA Technical Reports Server (NTRS)

Hartmann, W. K.

1981-01-01

Early selenographers resolved individual structural components of multi-ring basin systems but missed the underlying large-scale multi-ring basin patterns. The recognition of multi-ring basins as a general class of planetary features can be divided into five steps. Gilbert (1893) took a first step in recognizing radial 'sculpture' around the Imbrium basin system. Several writers through the 1940's rediscovered the radial sculpture and extended this concept by describing concentric rings around several circular maria. Some reminiscences are given about the fourth step - discovery of the Orientale basin and other basin systems by rectified lunar photography at the University of Arizona in 1961-62. Multi-ring basins remained a lunar phenomenon until the fifth step - discovery of similar systems of features on other planets, such as Mars (1972), Mercury (1974), and possibly Callisto and Ganymede (1979). This sequence is an example of gestalt recognition whose implications for scientific research are discussed.

Recursive Algorithms for Real-Time Digital CR-RCn Pulse Shaping

NASA Astrophysics Data System (ADS)

Nakhostin, M.

2011-10-01

This paper reports on recursive algorithms for real-time implementation of CR-(RC)n filters in digital nuclear spectroscopy systems. The algorithms are derived by calculating the Z-transfer function of the filters for filter orders up to n=4 . The performances of the filters are compared with the performance of the conventional digital trapezoidal filter using a noise generator which separately generates pure series, 1/f and parallel noise. The results of our study enable one to select the optimum digital filter for different noise and rate conditions.

Digital Networked Information Society and Public Health: Problems and Promises of Networked Health Communication of Lay Publics.

PubMed

Kim, Jeong-Nam

2018-01-01

This special issue of Health Communication compiles 10 articles to laud the promise and yet confront the problems in the digital networked information society related to public health. We present this anthology of symphony and cacophony of lay individuals' communicative actions in a digital networked information society. The collection of problems and promise of the new digital world may be a cornerstone joining two worlds-pre- and postdigital network society-and we hope this special issue will help better shape our future states of public health.

Biometric identification of capillariid eggs from archaeological sites in Patagonia.

PubMed

Taglioretti, V; Fugassa, M H; Beltrame, M O; Sardella, N H

2014-06-01

Numerous eggs of capillariid nematodes have been found in coprolites from a wide range of hosts and in raptor pellets in archaeological samples from Patagonia. The structure and sculpture of the eggshell of these nematodes and their biometry are commonly used for identification. The aim of this study was to determine whether eggs of the genus Calodium with similar morphology, found in different archaeological samples from Patagonia, belong to the same species. For this purpose, capillariid eggs (N= 843) with thick walls and radial striations were studied by permutational multivariate analysis of variance (PERMANOVA). Eggs exhibiting similar shape and structure also showed similar biometry, regardless of the zoological origin of coprolites (P= 0.84), host diet (P= 0.19), character of the archaeological sites (P= 0.67) and chronology (P= 0.66). Thus, they were attributed to the same species. We suggest that an unidentified zoonotic species of the genus Calodium occurred in the digestive tract of a wide range of hosts in Patagonia during the Holocene and that both human and animal populations were exposed to this parasite during the Holocene in the study area.

Subgeneric division of the genus Orcula Held 1837 with remarks on Romanian orculid data (Gastropoda, Pulmonata, Orculidae)

PubMed Central

Páll-Gergely, Barna; Deli, Tamás; Irikov, Atanas; Harl, Josef

2013-01-01

Abstract The genital anatomy of Orcula jetschini (Romania), Orcula zilchi (Bulgaria), and Orcula wagneri (Albania) is described. Based on anatomical features (morphology of the penial caecum) shell characters (sculpture and shape) and unpublished molecular data the genus Orcula is subdivided into three subgenera. Orcula zilchi was classified within the monotypic subgenus Orcula (Hausdorfia) subgen. n.; Orcula jetschini, Orcula wagneri, and Orcula schmidtii were classified to Orcula (Illyriobanatica) subgen. n. (type species: Pupa schmidtii) whereas the other Orcula species remain in the nominotypical subgenus. Orcula (Hausdorfia) is known from South-Eastern Bulgaria and North-Western Turkey, Orcula (Illyriobanatica) inhabits Western Romania, North-Western Greece, Albania, Macedonia, Kosovo, and Montenegro. The nine species of Orcula (Orcula) are known mainly from the Alps and the Western Carpathians (from Eastern France to Eastern Hungary and Slovakia). The occurrence of only one Orcula species namely Orcula jetschini is verified from Romania. Available information suggests that data on the Romanian occurrence of Orcula dolium and Orcula gularis were based on wrongly identified specimens. Sphyradium dobrogicum (=Orcula dobrogica) is considered as a synonym of Sphyradium doliolum. PMID:23794893

Radioanalytical Chemistry for Automated Nuclear Waste Process Monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Devol, Timothy A.

2005-06-01

Comparison of different pulse shape discrimination methods was performed under two different experimental conditions and the best method was identified. Beta/gamma discrimination of 90Sr/90Y and 137Cs was performed using a phoswich detector made of BC400 (2.5 cm OD x 1.2 cm) and BGO (2.5 cm O.D. x 2.5 cm ) scintillators. Alpha/gamma discrimination of 210Po and 137Cs was performed using a CsI:Tl (2.8 x 1.4 x 1.4 cm3) scintillation crystal. The pulse waveforms were digitized with a DGF-4c (X-Ray Instrumentation Associates) and analyzed offline with IGOR Pro software (Wavemetrics, Inc.). The four pulse shape discrimination methods that were compared include:more » rise time discrimination, digital constant fraction discrimination, charge ratio, and constant time discrimination (CTD) methods. The CTD method is the ratio of the pulse height at a particular time after the beginning of the pulse to the time at the maximum pulse height. The charge comparison method resulted in a Figure of Merit (FoM) of 3.3 (9.9 % spillover) and 3.7 (0.033 % spillover) for the phoswich and the CsI:Tl scintillator setups, respectively. The CTD method resulted in a FoM of 3.9 (9.2 % spillover) and 3.2 (0.25 % spillover), respectively. Inverting the pulse shape data typically resulted in a significantly higher FoM than conventional methods, but there was no reduction in % spillover values. This outcome illustrates that the FoM may not be a good scheme for the quantification of a system to perform pulse shape discrimination. Comparison of several pulse shape discrimination (PSD) methods was performed as a means to compare traditional analog and digital PSD methods on the same scintillation pulses. The X-ray Instrumentation Associates DGF-4C (40 Msps, 14-bit) was used to digitize waveforms from a CsI:Tl crystal and BC400/BGO phoswich detector.« less

Children's Media Culture in the New Millennium: Mapping the Digital Landscape.

ERIC Educational Resources Information Center

Montgomery, Kathryn C.

2000-01-01

Describes technological, demographic, and market forces shaping the new digital media culture and the various Web sites being created for children and teens, explaining how heavily-promoted commercial sites overshadow educational sites. Discusses efforts to create safe Internet zones for children. Recommends actions to promote development of a…

Mapping Languaging in Digital Spaces: Literacy Practices at Borderlands

ERIC Educational Resources Information Center

Dahlberg, Giulia Messina; Bagga-Gupta, Sangeeta

2016-01-01

The study presented in this article explores the ways in which discursive-technologies shape interaction in "digitally-mediated" educational settings in terms of affordances and constraints for the participants. Our multi-scale sociocultural-dialogical analysis of the interactional order in the online sessions of an "Italian for…

The Benslimane's Artistic Model for Leg Beauty.

PubMed

Benslimane, Fahd

2012-08-01

In 2000, the author started observing legs considered to be attractive. The goal was to have an ideal aesthetic model and compare the disparity between this model and a patient's reality. This could prove helpful during leg sculpturing to get closer to this ideal. Postoperatively, the result could then be compared to the ideal curves of the model legs and any remaining deviations from the ideal curves could be pointed out and eventually corrected in a second session. The lack of anthropometric studies of legs from the knee to the ankle led the author to select and study attractive legs to find out the common denominators of their beauty. The study consisted in analyzing the features that make legs look attractive. The legs of models in magazines were scanned and inserted into a PowerPoint program. The legs of live models, Barbie dolls, and athletes were photographed. Artistic drawings by Leonardo da Vinci were reviewed and Greek sculptures studied. Sculptures from the National Archaeological Museum of Athens were photographed and included in the PowerPoint program. This study shows that the first criterion for beautiful legs is the straightness of the leg column. Not a single attractive leg was found to deviate from the vertical, and each was in absolute continuity with the thigh. The second criterion is the similarity of curve distribution and progression from knee to ankle. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors at www.springer.com/00266.

Individual risk factors for carpal tunnel syndrome: an evaluation of body mass index, wrist index and hand anthropometric measurements.

PubMed

Boz, Cavit; Ozmenoglu, Mehmet; Altunayoglu, Vildan; Velioglu, Sibel; Alioglu, Zekeriya

2004-09-01

In this study we aimed to identify the role of the body mass index (BMI), wrist index and hand anthropometric measures as risk factors for carpal tunnel syndrome (CTS) in both genders. Based on clinical and electrophysiologic diagnostic criteria, 154 female and 44 male CTS patients, as well as 150 female and 44 male age-matched control subjects, were selected. BMI, wrist index, hand shape index, digit index and hand length/height ratio were compared between the CTS patients and the control subjects for each gender separately. Mean BMI was found to be a significant risk factor for CTS in both genders. The wrist index was found to be higher in female (P < 0.001) and in male (P = 0.034) CTS groups than in the respective control groups. Logistic regression analysis revealed the wrist index to be an independent risk factor in females, but not in males. Shape and digit indices were significantly higher in female CTS patients than in corresponding control subjects, and regression analysis showed the shape and digit indices to be independent risk factors for CTS. In the male CTS group, the shape and digit indices did not significantly differ from their controls. Differences in the hand length/height ratio were not statistically significant in female and male CTS patients compared to their controls and it was not found to be an independent risk factor for CTS. Our study confirmed BMI as an independent risk factor for CTS in both genders. Hand and wrist anthropometrics were found to be independent risk factors for CTS in females, but not in males.

Sanguibacter gelidistatuariae sp. nov., a novel psychrotolerant anaerobe from an ice sculpture in Antarctica, and emendation of descriptions of the family Sanguibacteraceae, the genus Sanguibacter and species S. antarcticus, S. inulinus, S. kedieii, S. marinus, S. soli and S. suarezii.

PubMed

Pikuta, Elena V; Lyu, Zhe; Williams, Melissa D; Patel, Nisha B; Liu, Yuchen; Hoover, Richard B; Busse, Hans-Jürgen; Lawson, Paul A; Whitman, William B

2017-05-01

A novel psychrotolerant bacterium, strain ISLP-3T, was isolated from a sample of naturally formed ice sculpture on the shore of Lake Podprudnoye in Antarctica. Cells were motile, stained Gram-positive, non-spore-forming, straight or slightly curved rods with the shape of a baseball bat. The new isolate was facultatively anaerobic and catalase-positive. Growth occurred at 3-35 °C with an optimum at 22-24 °C, 0-2 % (w/v) NaCl with an optimum at 0.3 % and pH 6.2-9.5 with an optimum at pH 7.5. Strain ISLP-3T grew on several carbon sources, with the best growth on cellobiose. The isolate possessed ureolytic activity but growth was inhibited by urea. The strain was sensitive to: ampicillin, gentamycin, kanamycin rifampicin, tetracycline and chloramphenicol. Major fatty acids were: anteiso-C15 : 0, iso-C16 : 0, C16 : 0, C14 : 0 and iso-C15 : 0. The predominant menaquinone was MK-9(H4). The genomic G+C content was 69.5 mol%. The 16S rRNA gene showed 99 % sequence similarity to that of Sanguibacter suarezii ST-26T, but their recA genes shared ≤91 % sequence similarity, suggesting that this new isolate represents a novel species within the genus Sanguibacter. This conclusion was supported by average nucleotide identity, which was ≤91 % to the most closely related strain. The name Sanguibacter gelidistatuariae sp. nov. is proposed for the novel species with the type strain ISLP-3T=ATCC TSD-17T=DSM 100501T=JCM 30887T). The complete genome draft sequence of ISLP-3T was deposited under IMG OID 2657245272. Emendments to the descriptions of related taxa have been made based on experimental data from our comparative analysis.

View in the Woodrow Wilson Plaza (along the building's 13th ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View in the Woodrow Wilson Plaza (along the building's 13th Street side) looking to Martin Puryear's "Bearing Witness" sculpture - Ronald Reagan Building and International Trade Center, 1300 Pennsylvania Avenue, NW, Washington, District of Columbia, DC

Sculptures of Ordinary People.

ERIC Educational Resources Information Center

Hubbard, Guy

2000-01-01

Discusses the presence of ordinary people in art. Features four sculptors and examples of their work: (1) "Janitor" by Duane Hanson; (2) "The Red Light" by George Segal; (3) "The Sodbuster" by Luis A. Jimenez; and (4) "The Driller" by Mahonri Young. (CMK)

A triple-crystal phoswich detector with digital pulse shape discrimination for alpha/beta/gamma spectroscopy

NASA Astrophysics Data System (ADS)

White, Travis L.; Miller, William H.

1999-02-01

Researchers at the University of Missouri - Columbia have developed a three-crystal phoswich detector coupled to a digital pulse shape discrimination system for use in alpha/beta/gamma spectroscopy. Phoswich detectors use a sandwich of scintillators viewed by a single photomultiplier tube to simultaneously detect multiple types of radiation. Separation of radiation types is based upon pulse shape difference among the phosphors, which has historically been performed with analog circuitry. The system uses a GaGe CompuScope 1012, 12 bit, 10 MHz computer-based oscilloscope that digitally captures the pulses from a phoswich detector and subsequently performs pulse shape discrimination with cross-correlation analysis. The detector, based partially on previous phoswich designs by Usuda et al., uses a 10 mg/cm 2 thick layer of ZnS(Ag) for alpha detection, followed by a 0.254 cm CaF 2(Eu) crystal for beta detection, all backed by a 2.54 cm NaI(Tl) crystal for gamma detection. Individual energy spectra and count rate information for all three radiation types are displayed and updated periodically. The system shows excellent charged particle discrimination with an accuracy of greater than 99%. Future development will include a large area beta probe with gamma-ray discrimination, systems for low-energy photon detection (e.g. Bremsstrahlung or keV-range photon emissions), and other health physics instrumentation.

Raised Relief Mars Globe Brings the Red Planet Closer

NASA Technical Reports Server (NTRS)

2006-01-01

The Mars Globe 20x is the first digitally produced raised relief globe to be sold at retail establishments. The rises and dips of the Martian landscape have been multiplied by 20 to make the shapes more noticeable to human touch and sight. They make this globe, with its over 1 million elevation points, a visually stunning introduction to the planet. Spectrum 3D used the NASA digital land elevation data to aim lasers that then shaped and defined the master globe s surface. Subsequent copies were then made by creating a master globe mold. The molded copies are hand finished by workers who remove errant edges or lines that may appear on the raw globes and then paint the surfaces. The result is a globe that measures in at 18 inches in diameter, roughly 1:15,729,473 scale of the actual planet. The exaggerated raised relief is like having a 3-D digital microscope for planetary shapes. This makes the landmarks easier to learn and understand, as it provides easy visuals for orientation. People have a natural propensity for understanding 3-D shapes more easily than numbers or words. The 3-D globes appeal to both the kinetic and visual learning aspects of the brain, making it easy for people to readily memorize the landmarks and to make a mental model that they will remember for a long time.

Automated measurement of human body shape and curvature using computer vision

NASA Astrophysics Data System (ADS)

Pearson, Jeremy D.; Hobson, Clifford A.; Dangerfield, Peter H.

1993-06-01

A system to measure the surface shape of the human body has been constructed. The system uses a fringe pattern generated by projection of multi-stripe structured light. The optical methodology used is fully described and the algorithms used to process acquired digital images are outlined. The system has been applied to the measurement of the shape of the human back in scoliosis.

Varieties of paw and digit movement during spontaneous food handling in rats: postures, bimanual coordination, preferences, and the effect of forelimb cortex lesions.

PubMed

Whishaw, I Q; Coles, B L

1996-05-01

This study describes how rats use their paws and digits when handling a wide range of foodstuffs, including food pellets, grapes, sunflower seeds, shelled and unshelled peanuts, and different sized pastas, etc. Analysis of videorecordings show that the rats display digit postures that include variations in the spacing of the digits, differences in the relative use of different digits, and interlimb differences in paw and digit posture. The rats also display limb preferences in that one paw is used in a supporting function while the other rotates, flips, or pushes the food as is required by the shape of the item. There is a significant correlation between the paw used for manipulation and food items of similar shape but no correlation between the limb used for manipulation and that used for skilled reaching. Small unilateral lesions to the forepaw area of somatic sensorimotor cortex produced impairments in use of the paw contralateral to the lesions. These results: (1) reveal a surprising complexity in the way in which rats use their paws and digits in manipulating food; (2) show that rats have limb preferences in spontaneous food handling; and (3) show that manipulatory dexterity is dependent upon the integrity of the forelimb area of motor cortex. The results are discussed in relation to the evolution of motor skill, the use of rats for investigating questions of motor system organization, neural plasticity, and recovery of function after brain damage.

Measurements using orthodontic analysis software on digital models obtained by 3D scans of plaster casts : Intrarater reliability and validity.

PubMed

Czarnota, Judith; Hey, Jeremias; Fuhrmann, Robert

2016-01-01

The purpose of this work was to determine the reliability and validity of measurements performed on digital models with a desktop scanner and analysis software in comparison with measurements performed manually on conventional plaster casts. A total of 20 pairs of plaster casts reflecting the intraoral conditions of 20 fully dentate individuals were digitized using a three-dimensional scanner (D700; 3Shape). A series of defined parameters were measured both on the resultant digital models with analysis software (Ortho Analyzer; 3Shape) and on the original plaster casts with a digital caliper (Digimatic CD-15DCX; Mitutoyo). Both measurement series were repeated twice and analyzed for intrarater reliability based on intraclass correlation coefficients (ICCs). The results from the digital models were evaluated for their validity against the casts by calculating mean-value differences and associated 95 % limits of agreement (Bland-Altman method). Statistically significant differences were identified via a paired t test. Significant differences were obtained for 16 of 24 tooth-width measurements, for 2 of 5 sites of contact-point displacement in the mandibular anterior segment, for overbite, for maxillary intermolar distance, for Little's irregularity index, and for the summation indices of maxillary and mandibular incisor width. Overall, however, both the mean differences between the results obtained on the digital models versus on the plaster casts and the dispersion ranges associated with these differences suggest that the deviations incurred by the digital measuring technique are not clinically significant. Digital models are adequately reproducible and valid to be employed for routine measurements in orthodontic practice.

MADCAT Aircraft Wings Optimize Their Shape For Efficient Flight

NASA Image and Video Library

2016-11-09

The Mission Adaptive Digital Composites Aerostructures Technology (MADCAT) project is designing an aircraft wing that can change its shape to adapt to changing flight conditions. Constructed of lightweight lattice structures made of carbon fiber materials, the goal is to reduce drag, leading to more efficient airplanes.

Fertile organs and in situ spores of a new dipteridaceous fern Hausmannia sinensis from the Jurassic of northern China.

PubMed

Wang, Yongdong; Zhang, Hong

2010-01-22

As a representative fossil member of the dipteridaceous fern, genus Hausmannia was reported worldwide from the Mesozoic strata; however, little is known about the fertile structures, including sporangia and in situ spores, of this genus. In this study, a new species Hausmannia sinensis was identified from the Middle Jurassic of Nei Mongol (Inner Mongolia), northern China. The specimens are compressions and are well preserved with details of sporangia and in situ spores. The leaf laminae are broadly fan-shaped, with an almost entire margin. Primary and lateral veins dichotomously branch to form square or polygonal meshes. Each ultimate mesh bears one to two circular sori of 0.4 mm in diameter. Sori are exindusiate; each sorus contains three to six round to ovoid sporangia. The annulus is developed and oblique, with stomial region present in proximal position. Spores are trilete, circular to oval in shape. Both proximal and distal surfaces are covered with baculate to subverrucate sculptures. Spores range from 20 to 30 microm in diameter (average 28 microm), and are comparable to the dispersed genera Baculatisporites Thomas and Pflug and Apiculatisporis Potonié and Kremp. Hausmannia sinensis represents the first compression species of genus Hausmannia form Eurasia, which shows the combination of well-preserved sori, sporangia, annuli and in situ spore characters, and is therefore helpful for further understanding the diversity and evolution of the Dipteridaceae fern lineage through time.

Fertile organs and in situ spores of a new dipteridaceous fern Hausmannia sinensis from the Jurassic of northern China

PubMed Central

Wang, Yongdong; Zhang, Hong

2010-01-01

As a representative fossil member of the dipteridaceous fern, genus Hausmannia was reported worldwide from the Mesozoic strata; however, little is known about the fertile structures, including sporangia and in situ spores, of this genus. In this study, a new species Hausmannia sinensis was identified from the Middle Jurassic of Nei Mongol (Inner Mongolia), northern China. The specimens are compressions and are well preserved with details of sporangia and in situ spores. The leaf laminae are broadly fan-shaped, with an almost entire margin. Primary and lateral veins dichotomously branch to form square or polygonal meshes. Each ultimate mesh bears one to two circular sori of 0.4 mm in diameter. Sori are exindusiate; each sorus contains three to six round to ovoid sporangia. The annulus is developed and oblique, with stomial region present in proximal position. Spores are trilete, circular to oval in shape. Both proximal and distal surfaces are covered with baculate to subverrucate sculptures. Spores range from 20 to 30 μm in diameter (average 28 μm), and are comparable to the dispersed genera Baculatisporites Thomas and Pflug and Apiculatisporis Potonié and Kremp. Hausmannia sinensis represents the first compression species of genus Hausmannia form Eurasia, which shows the combination of well-preserved sori, sporangia, annuli and in situ spore characters, and is therefore helpful for further understanding the diversity and evolution of the Dipteridaceae fern lineage through time. PMID:19364738

A Methodology to Teach Advanced A/D Converters, Combining Digital Signal Processing and Microelectronics Perspectives

ERIC Educational Resources Information Center

Quintans, C.; Colmenar, A.; Castro, M.; Moure, M. J.; Mandado, E.

2010-01-01

ADCs (analog-to-digital converters), especially Pipeline and Sigma-Delta converters, are designed using complex architectures in order to increase their sampling rate and/or resolution. Consequently, the learning of ADC devices also encompasses complex concepts such as multistage synchronization, latency, oversampling, modulation, noise shaping,…

Effects of Message Interactivity upon Relational Maintenance Strategy in Digital Communications between Organizations and the Public

ERIC Educational Resources Information Center

Liu, Zhan-Qing

2012-01-01

Digital communication between organizations and the public is strategically important in shaping mutual understanding and long term relationship. The primary focus of this project was to investigate the relationship between message interactivity and relational maintenance strategy in the email communication process on organization websites. At…

Shaping perfect optical vortex with amplitude modulated using a digital micro-mirror device

NASA Astrophysics Data System (ADS)

Zhang, Chonglei; Min, Changjun; Yuan, X.-C.

2016-12-01

We propose a technique to generate of perfect optical vortex (POV) via Fourier transformation of Bessel-Gauss (BG) beams through encoding of the amplitude of the optical field with binary amplitude digital micro-mirrors device (DMD). Furthermore, we confirm the correct phase patterns of the POV with the method of Mach-Zehnder interferometer. Our approach to generate the POV has the advantages that rapidly switch among the different modes, wide spectral regions and high energy tolerance. Since the POV possess propagation properties that not shape-invariant, we therefore suppose that our proposed approach will find potential applications in optical microscopy, optical fabrication, and optical communication.

Superfast 3D shape measurement of a flapping flight process with motion based segmentation

NASA Astrophysics Data System (ADS)

Li, Beiwen

2018-02-01

Flapping flight has drawn interests from different fields including biology, aerodynamics and robotics. For such research, the digital fringe projection technology using defocused binary image projection has superfast (e.g. several kHz) measurement capabilities with digital-micromirror-device, yet its measurement quality is still subject to the motion of flapping flight. This research proposes a novel computational framework for dynamic 3D shape measurement of a flapping flight process. The fast and slow motion parts are separately reconstructed with Fourier transform and phase shifting. Experiments demonstrate its success by measuring a flapping wing robot (image acquisition rate: 5000 Hz; flapping speed: 25 cycles/second).

A practical introduction to skeletons for the plant sciences1

PubMed Central

Bucksch, Alexander

2014-01-01

Before the availability of digital photography resulting from the invention of charged couple devices in 1969, the measurement of plant architecture was a manual process either on the plant itself or on traditional photographs. The introduction of cheap digital imaging devices for the consumer market enabled the wide use of digital images to capture the shape of plant networks such as roots, tree crowns, or leaf venation. Plant networks contain geometric traits that can establish links to genetic or physiological characteristics, support plant breeding efforts, drive evolutionary studies, or serve as input to plant growth simulations. Typically, traits are encoded in shape descriptors that are computed from imaging data. Skeletons are one class of shape descriptors that are used to describe the hierarchies and extent of branching and looping plant networks. While the mathematical understanding of skeletons is well developed, their application within the plant sciences remains challenging because the quality of the measurement depends partly on the interpretation of the skeleton. This article is meant to bridge the skeletonization literature in the plant sciences and related technical fields by discussing best practices for deriving diameters and approximating branching hierarchies in a plant network. PMID:25202645

Shaping electromagnetic waves using software-automatically-designed metasurfaces.

PubMed

Zhang, Qian; Wan, Xiang; Liu, Shuo; Yuan Yin, Jia; Zhang, Lei; Jun Cui, Tie

2017-06-15

We present a fully digital procedure of designing reflective coding metasurfaces to shape reflected electromagnetic waves. The design procedure is completely automatic, controlled by a personal computer. In details, the macro coding units of metasurface are automatically divided into several types (e.g. two types for 1-bit coding, four types for 2-bit coding, etc.), and each type of the macro coding units is formed by discretely random arrangement of micro coding units. By combining an optimization algorithm and commercial electromagnetic software, the digital patterns of the macro coding units are optimized to possess constant phase difference for the reflected waves. The apertures of the designed reflective metasurfaces are formed by arranging the macro coding units with certain coding sequence. To experimentally verify the performance, a coding metasurface is fabricated by automatically designing two digital 1-bit unit cells, which are arranged in array to constitute a periodic coding metasurface to generate the required four-beam radiations with specific directions. Two complicated functional metasurfaces with circularly- and elliptically-shaped radiation beams are realized by automatically designing 4-bit macro coding units, showing excellent performance of the automatic designs by software. The proposed method provides a smart tool to realize various functional devices and systems automatically.

Developing Images on Clay . . . A New Approach.

ERIC Educational Resources Information Center

Gamble, Harriet

1999-01-01

Presents a ceramics activity for beginning art students inspired by a workshop given by artist David Stabley, who combines unique sculptural forms with colorful, nontraditional decorating approaches. Students make plates or tiles that tell a story about their world. Includes instructions. (CMK)

78 FR 19565 - Notice of Proposal To Extend the Memorandum of Understanding Between the Government of the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

... From the Paleolithic Period Through the Tang Dynasty and Monumental Sculpture and Wall Art At Least 250... the Imposition of Import Restrictions on Categories of Archaeological Material from the Paleolithic...

Outrageous Owls

ERIC Educational Resources Information Center

Walkup, Nancy

2007-01-01

The author's encounter with a live owl and her purchase of a Peruvian folk art gourd inspired a new interdisciplinary experience for the author's fourth grade students. In this article, she describes how her students explored owls through clay sculpture. (Contains 2 resources and 1 online resource.)

Voyvengo

ERIC Educational Resources Information Center

Noriega, Chon A.

2012-01-01

Born in 1933, Rafael Ferrer has encountered, engaged, and challenged art movements that define the twentieth century, including European surrealism, American post-minimalism, and Latino neo-expressionism. He has worked in sculpture, drawing, and painting, and also with assemblage, collage, actions, and installation. His prolific and wide-ranging…

Digital fluxgate magnetometer: design notes

NASA Astrophysics Data System (ADS)

Belyayev, Serhiy; Ivchenko, Nickolay

2015-12-01

We presented an approach to understanding the performance of a fully digital fluxgate magnetometer. All elements of the design are important for the performance of the instrument, and the presence of the digital feed-back loop introduces certain peculiarities affecting the noise and dynamic performance of the instrument. Ultimately, the quantisation noise of the digital to analogue converter is found to dominate the noise of the current design, although noise shaping alleviates its effect to some extent. An example of magnetometer measurements on board a sounding rocket is presented, and ways to further improve the performance of the instrument are discussed.

Digital Media Use in Families: Theories and Strategies for Intervention.

PubMed

Dalope, Kristin A; Woods, Leonard J

2018-04-01

Family dynamics are increasingly being influenced by digital media. Three frameworks are described to help clinicians to understand and respond to this influence. First, a social-ecological framework shows how media has both a direct and indirect impact on individuals, relationships, communities, and society. Next, family systems theory is introduced to demonstrate digital media-related interactions within families. Finally, a developmental framework explores the role of digital media in shaping parenting. These theories are then integrated into practical strategies that clinicians can use, including recommendations and resources from the American Academy of Pediatrics. Copyright © 2017 Elsevier Inc. All rights reserved.

Automatic Topography Using High Precision Digital Moire Methods

NASA Astrophysics Data System (ADS)

Yatagai, T.; Idesawa, M.; Saito, S.

1983-07-01

Three types of moire topographic methods using digital techniques are proposed. Deformed gratings obtained by projecting a reference grating onto an object under test are subjected to digital analysis. The electronic analysis procedures of deformed gratings described here enable us to distinguish between depression and elevation of the object, so that automatic measurement of 3-D shapes and automatic moire fringe interpolation are performed. Based on the digital moire methods, we have developed a practical measurement system, with a linear photodiode array on a micro-stage as a scanning image sensor. Examples of fringe analysis in medical applications are presented.

Shape matters: Lifecycle of cooperative patches promotes cooperation in bulky populations

PubMed Central

Misevic, Dusan; Frénoy, Antoine; Lindner, Ariel B; Taddei, François

2015-01-01

Natural cooperative systems take many forms, ranging from one-dimensional cyanobacteria arrays to fractal-like biofilms. We use in silico experimental systems to study a previously overlooked factor in the evolution of cooperation, physical shape of the population. We compare the emergence and maintenance of cooperation in populations of digital organisms that inhabit bulky (100 × 100 cells) or slender (4 × 2500) toroidal grids. Although more isolated subpopulations of secretors in a slender population could be expected to favor cooperation, we find the opposite: secretion evolves to higher levels in bulky populations. We identify the mechanistic explanation for the shape effect by analyzing the lifecycle and dynamics of cooperator patches, from their emergence and growth, to invasion by noncooperators and extinction. Because they are constrained by the population shape, the cooperator patches expand less in slender than in bulky populations, leading to fewer cooperators, less public good secretion, and generally lower cooperation. The patch dynamics and mechanisms of shape effect are robust across several digital cooperation systems and independent of the underlying basis for cooperation (public good secretion or a cooperation game). Our results urge for a greater consideration of population shape in the study of the evolution of cooperation across experimental and modeling systems. PMID:25639379

Multi-shape active composites by 3D printing of digital shape memory polymers

NASA Astrophysics Data System (ADS)

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L.; Qi, H. Jerry

2016-04-01

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers - digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.

Multi-shape active composites by 3D printing of digital shape memory polymers.

PubMed

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L; Qi, H Jerry

2016-04-13

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers - digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.

Multi-shape active composites by 3D printing of digital shape memory polymers

PubMed Central

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L.; Qi, H. Jerry

2016-01-01

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers – digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications. PMID:27071543

Sex determination by three-dimensional geometric morphometrics of craniofacial form.

PubMed

Chovalopoulou, Maria-Eleni; Valakos, Efstratios D; Manolis, Sotiris K

The purpose of the present study is to define which regions of the cranium, the upper-face, the orbits and the nasal are the most sexually dimorphic, by using three-dimensional geometric morphometric methods, and investigate the effectiveness of this method in determining sex from the shape of these regions. The study sample consisted of 176 crania of known sex (94 males, 82 females) belonging to individuals who lived in Greece during the 20(th) century. The three-dimensional co-ordinates of 31 ecto-cranial landmarks were digitized using a MicroScribe 3DX contact digitizer. Goodall's F-test was performed in order to compare statistical differences in shape between males and females. Generalized Procrustes Analysis (GPA) was used to obtain size and shape variables for statistical analysis. Shape, Size and Form analyses were carried out by logistic regression and discriminant function analysis. The results indicate that there are shape differences between the sexes in the upper-face and the orbits. The highest shape classification rate was obtained from the upper-face region. The centroid size of the caraniofacial and the orbital regions was smaller in females than males. Moreover, it was found that size is significant for sexual dimorphism in the upper-face region. As anticipated, the classification accuracy improves when both size and shape are combined. The findings presented here constitute a firm basis upon which further research can be conducted.

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications.

PubMed

Pérez Sanjurjo, Javier; Prefasi, Enrique; Buffa, Cesare; Gaggl, Richard

2017-06-07

The use of MEMS sensors has been increasing in recent years. To cover all the applications, many different readout circuits are needed. To reduce the cost and time to market, a generic capacitance-to-digital converter (CDC) seems to be the logical next step. This work presents a configurable CDC designed for capacitive MEMS sensors. The sensor is built with a bridge of MEMS, where some of them function with pressure. Then, the capacitive to digital conversion is realized using two steps. First, a switched-capacitor (SC) preamplifier is used to make the capacitive to voltage (C-V) conversion. Second, a self-oscillated noise-shaping integrating dual-slope (DS) converter is used to digitize this magnitude. The proposed converter uses time instead of amplitude resolution to generate a multibit digital output stream. In addition it performs noise shaping of the quantization error to reduce measurement time. This article shows the effectiveness of this method by measurements performed on a prototype, designed and fabricated using standard 0.13 µm CMOS technology. Experimental measurements show that the CDC achieves a resolution of 17 bits, with an effective area of 0.317 mm², which means a pressure resolution of 1 Pa, while consuming 146 µA from a 1.5 V power supply.

3D digitization methods based on laser excitation and active triangulation: a comparison

NASA Astrophysics Data System (ADS)

Aubreton, Olivier; Mériaudeau, Fabrice; Truchetet, Frédéric

2016-04-01

3D reconstruction of surfaces is an important topic in computer vision and corresponds to a large field of applications: industrial inspection, reverse engineering, object recognition, biometry, archeology… Because of the large varieties of applications, one can find in the literature a lot of approaches which can be classified into two families: passive and active [1]. Certainly because of their reliability, active approaches, using imaging system with an additional controlled light source, seem to be the most commonly used in the industrial field. In this domain, the 3D digitization approach based on active 3D triangulation has had important developments during the last ten years [2] and seems to be mature today if considering the important number of systems proposed by manufacturers. Unfortunately, the performances of active 3D scanners depend on the optical properties of the surface to digitize. As an example, on Fig 1.a, a 3D shape with a diffuse surface has been digitized with Comet V scanner (Steinbichler). The 3D reconstruction is presented on Fig 1.b. The same experiment was carried out on a similar object (same shape) but presenting a specular surface (Fig 1.c and Fig 1.d) ; it can clearly be observed, that the specularity influences of the performance of the digitization.

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications

PubMed Central

Pérez Sanjurjo, Javier; Prefasi, Enrique; Buffa, Cesare; Gaggl, Richard

2017-01-01

The use of MEMS sensors has been increasing in recent years. To cover all the applications, many different readout circuits are needed. To reduce the cost and time to market, a generic capacitance-to-digital converter (CDC) seems to be the logical next step. This work presents a configurable CDC designed for capacitive MEMS sensors. The sensor is built with a bridge of MEMS, where some of them function with pressure. Then, the capacitive to digital conversion is realized using two steps. First, a switched-capacitor (SC) preamplifier is used to make the capacitive to voltage (C-V) conversion. Second, a self-oscillated noise-shaping integrating dual-slope (DS) converter is used to digitize this magnitude. The proposed converter uses time instead of amplitude resolution to generate a multibit digital output stream. In addition it performs noise shaping of the quantization error to reduce measurement time. This article shows the effectiveness of this method by measurements performed on a prototype, designed and fabricated using standard 0.13 µm CMOS technology. Experimental measurements show that the CDC achieves a resolution of 17 bits, with an effective area of 0.317 mm2, which means a pressure resolution of 1 Pa, while consuming 146 µA from a 1.5 V power supply. PMID:28590425

Comparison of linear measurements and analyses taken from plaster models and three-dimensional images.

PubMed

Porto, Betina Grehs; Porto, Thiago Soares; Silva, Monica Barros; Grehs, Renésio Armindo; Pinto, Ary dos Santos; Bhandi, Shilpa H; Tonetto, Mateus Rodrigues; Bandéca, Matheus Coelho; dos Santos-Pinto, Lourdes Aparecida Martins

2014-11-01

Digital models are an alternative for carrying out analyses and devising treatment plans in orthodontics. The objective of this study was to evaluate the accuracy and the reproducibility of measurements of tooth sizes, interdental distances and analyses of occlusion using plaster models and their digital images. Thirty pairs of plaster models were chosen at random, and the digital images of each plaster model were obtained using a laser scanner (3Shape R-700, 3Shape A/S). With the plaster models, the measurements were taken using a caliper (Mitutoyo Digimatic(®), Mitutoyo (UK) Ltd) and the MicroScribe (MS) 3DX (Immersion, San Jose, Calif). For the digital images, the measurement tools used were those from the O3d software (Widialabs, Brazil). The data obtained were compared statistically using the Dahlberg formula, analysis of variance and the Tukey test (p < 0.05). The majority of the measurements, obtained using the caliper and O3d were identical, and both were significantly different from those obtained using the MS. Intra-examiner agreement was lowest when using the MS. The results demonstrated that the accuracy and reproducibility of the tooth measurements and analyses from the plaster models using the caliper and from the digital models using O3d software were identical.

Size, shape and flow characterization of ground wood chip and ground wood pellet particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rezaei, Hamid; Lim, C. Jim; Lau, Anthony

Size, shape and density of biomass particles influence their transportation, fluidization, rates of drying and thermal decomposition. Pelleting wood particles increases the particle density and reduces the variability of physical properties among biomass particles. In this study, pine chips prepared for pulping and commercially produced pine pellets were ground in a hammer mill using grinder screens of 3.2, 6.3, 12.7 and 25.4mmperforations. Pellets consumed about 7 times lower specific grinding energy than chips to produce the same size of particles. Grinding pellets produced the smaller particles with narrower size distribution than grinding chips. Derived shape factors in digital image analysismore » showed that chip particles were rectangular and had the aspect ratios about one third of pellet particles. Pellet particles were more circular shape. The mechanical sieving underestimated the actual particle size and did not represent the size of particles correctly. Instead, digital imaging is preferred. Angle of repose and compressibility tests represented the flow properties of ground particles. Pellet particles made a less compacted bulk, had lower cohesion and did flow easier in a pile of particles. In conclusion, particle shape affected the flow properties more than particle size« less

Size, shape and flow characterization of ground wood chip and ground wood pellet particles

DOE PAGES

Rezaei, Hamid; Lim, C. Jim; Lau, Anthony; ...

2016-07-11

Size, shape and density of biomass particles influence their transportation, fluidization, rates of drying and thermal decomposition. Pelleting wood particles increases the particle density and reduces the variability of physical properties among biomass particles. In this study, pine chips prepared for pulping and commercially produced pine pellets were ground in a hammer mill using grinder screens of 3.2, 6.3, 12.7 and 25.4mmperforations. Pellets consumed about 7 times lower specific grinding energy than chips to produce the same size of particles. Grinding pellets produced the smaller particles with narrower size distribution than grinding chips. Derived shape factors in digital image analysismore » showed that chip particles were rectangular and had the aspect ratios about one third of pellet particles. Pellet particles were more circular shape. The mechanical sieving underestimated the actual particle size and did not represent the size of particles correctly. Instead, digital imaging is preferred. Angle of repose and compressibility tests represented the flow properties of ground particles. Pellet particles made a less compacted bulk, had lower cohesion and did flow easier in a pile of particles. In conclusion, particle shape affected the flow properties more than particle size« less

Transcultural Responses to Aesthetic and Therapeutic Experience: An Ethological Approach.

ERIC Educational Resources Information Center

Henley, David R.

1994-01-01

Focuses on group dynamics of multiethnic peoples interacting with installation sculpture by Jean Dubuffet. Identifies those dynamics that become activated when responding to an aesthetic stimulus. Considers resulting behaviors within ethological/phenomenological framework and applied to practice of art therapy. (NB)

Detail view on one of the pedimented pavilions on Fifteenth ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view on one of the pedimented pavilions on Fifteenth Street; James E. Fraser's sculpture depicts the work of fisherman - United States Department of Commerce, Bounded by Fourteenth, Fifteenth, and E streets and Constitution Avenue, Washington, District of Columbia, DC

Theoretical Limits of Lunar Vision Aided Navigation with Inertial Navigation System

DTIC Science & Technology

2015-03-26

camera model. Light reflected or projected from objects in the scene of the outside world is taken in by the aperture (or opening) shaped as a double...model’s analog aspects with an analog-to-digital interface converting raw images of the outside world scene into digital information a computer can use to...Figure 2.7. Digital Image Coordinate System. Used with permission [30]. Angular Field of View. The angular field of view is the angle of the world scene

Dying star creates sculpture of gas and dust

NASA Astrophysics Data System (ADS)

2004-09-01

Sculpture of gas and dust hi-res Size hi-res: 125 Kb Credits: ESA, NASA, HEIC and The Hubble Heritage Team (STScI/AURA) Dying star creates sculpture of gas and dust The so-called Cat's Eye Nebula, formally catalogued NGC 6543 and seen here in this detailed view from the NASA/ESA Hubble Space Telescope, is one of the most complex planetary nebulae ever seen in space. A planetary nebula forms when Sun-like stars gently eject their outer gaseous layers to form bright nebulae with amazing twisted shapes. Hubble first revealed NGC 6543's surprisingly intricate structures including concentric gas shells, jets of high-speed gas and unusual shock-induced knots of gas in 1994. This new image, taken with Hubble's Advanced Camera for Surveys (ACS), reveals the full beauty of a bull's-eye pattern of eleven or more concentric rings, or shells, around the Cat’s Eye. Each ‘ring’ is actually the edge of a spherical bubble seen projected onto the sky - which is why it appears bright along its outer edge. High resolution version (JPG format) 125 Kb High resolution version (TIFF format) 2569 Kb Acknowledgment: R. Corradi (Isaac Newton Group of Telescopes, Spain) and Z. Tsvetanov (NASA). Sculpture of gas and dust hi-res Size hi-res: 287 Kb Credits: Nordic Optical Telescope and Romano Corradi (Isaac Newton Group of Telescopes, Spain) Dying star creates sculpture of gas and dust An enormous but extremely faint halo of gaseous material surrounds the Cat’s Eye Nebula and is over three light-years across. Some planetary nebulae been found to have halos like this one, likely formed of material ejected during earlier active episodes in the star's evolution - most likely some 50 000 to 90 000 years ago. This image was taken by Romano Corradi with the Nordic Optical Telescope on La Palma in the Canary Islands. The image is constructed from two narrow-band exposures showing oxygen atoms (1800 seconds, in blue) and nitrogen atoms (1800 seconds, in red). High resolution version (JPG format) 287 Kb High resolution version (TIFF format) 4674 Kb Although the rings may be the key to explaining the final ‘gasp’ of the dying central star, the mystery behind the Cat’s Eye Nebula’s nested ‘Russian doll’ structure remains largely unsolved. The so-called Cat's Eye Nebula, formally catalogued NGC 6543 and seen here in this detailed view from the NASA/ESA Hubble Space Telescope, is one of the most complex planetary nebulae ever seen in space. A planetary nebula forms when Sun-like stars gently eject their outer gaseous layers to form bright nebulae with amazing twisted shapes. Hubble first revealed NGC 6543's surprisingly intricate structures including concentric gas shells, jets of high-speed gas and unusual shock-induced knots of gas in 1994. This new image, taken with Hubble's Advanced Camera for Surveys (ACS), reveals the full beauty of a bull's-eye pattern of eleven or more concentric rings, or shells, around the Cat’s Eye. Each ‘ring’ is actually the edge of a spherical bubble seen projected onto the sky - which is why it appears bright along its outer edge. Observations suggest that the star ejected its mass in a series of pulses at 1500-year intervals. These convulsions created dust shells that each contains as much mass as all of the planets in our Solar System combined (but still only one-percent of the Sun's mass). These concentric shells make a layered onion-skin structure around the dying star. The view from Hubble is like seeing an onion cut in half, where each layer of skin is discernible. Until recently, it was thought that shells around planetary nebulae were a rare phenomenon. However, Romano Corradi (Isaac Newton Group of Telescopes, Spain) and collaborators, in a paper published in the European journal Astronomy & Astrophysics in April 2004, have instead shown that the formation of these rings is likely to be the rule rather than the exception. The bull's-eye patterns seen around planetary nebulae come as a surprise to astronomers because they had no expectation of episodes of mass loss at the end of stellar lives that repeat every 1500 years or so. Several explanations have been proposed, including cycles of magnetic activity somewhat similar to our own Sun's sunspot cycle, the action of companion stars orbiting around the dying star, and stellar pulsations. Another school of thought is that the material is ejected smoothly from the star, and the rings are created later on due to formation of waves in the outflowing material. It will take further observations and more theoretical studies to decide between these and other possible explanations. Approximately 1000 years ago the pattern of mass loss suddenly changed, and the Cat's Eye Nebula itself started forming inside the dusty shells. It has been expanding ever since, as can be seen by comparing Hubble images taken in 1994, 1997, 2000 and 2002. But what has caused this dramatic change? Many aspects of the process that leads a star to lose its gaseous envelope are poorly known, and the study of planetary nebulae is one of the few ways to recover information about the last few thousand years in the life of a Sun-like star. Notes for editors: The group of astronomers involved in the April 2004, Astronomy & Astrophysics paper are: R.L.M. Corradi (Isaac Newton Group of Telescopes, Spain), P. Sanchez-Blazquez (Universidad Complutense, Spain), G. Mellema (Foundation for Research in Astronomy, The Netherlands), C. Giammanco (Instituto de Astrofisica de Canarias, Spain) and H.E. Schwarz (Cerro Tololo Inter-American Observatory, Chile). The Hubble Space Telescope is a project of international co-operation between ESA and NASA.

Sandscape - engaging people in Met Office science through sand sculpture

NASA Astrophysics Data System (ADS)

Liggins, Felicity; Dowell, Ellen; Wardley, Jamie; Jamieson, Claire

2017-04-01

In 2015, the Met Office's award-winning outreach programme, designed to inspire the next generation of scientists and engineers, delivered one of its most ambitious and creative activities to date. It explored how scientists and artists can come together to create an engaging experience for young people and families. This activity was called Sandscape. Sandscape is an interactive sand sculpture workshop exploring how weather and climate affect our health. Budding sand sculptors are shown how to fashion elaborate structures from sand and water - creating a landscape with bridges, skyscrapers, forests and factories. As they work, participants are encouraged by the scientists delivering the activity to reflect on what makes a healthy city, considering how the natural and built environments influence air quality and circulation and how this impacts our health. Topics discussed include urban heat islands, air pollution and dispersion modelling, pollen forecasting and predicting the wind-borne spread of animal diseases. Each hour long workshop culminates in a dramatic demonstration that uses dry ice to represent clean air circulating from mountains, along rivers and into cities. Here we present an overview of Sandscape, identify the strengths and challenges of such a collaborative, innovative and playful approach to public engagement and share the results of our evaluation. Sandscape was originally supported by the Met Office and the Wellcome Trust, and produced by Einstein's Garden in collaboration with the Met Office, scientists from the University of Exeter and sand sculptors from Sand in Your Eye. It was first presented in Einstein's Garden at Green Man festival 2015, an independent music and arts festival held annually in Wales, and has since been invited to run at the 2015 Bournemouth Arts By the Sea Festival and Teignmouth's TRAIL Sculpture Festival in the summer of 2016.

Art and dystonia.

PubMed

Garcia-Ruiz, Pedro J; Slawek, Jaroslaw; Sitek, Emilia J; Martinez Castrillo, Juan Carlos

2015-09-15

Dystonia has a recent history in medicine. Focal dystonia was described in the 19th century by classic authors including Gowers, whilst generalized dystonia was described at the turn of the century. However, it is possible to find precise descriptions of dystonia in art, centuries before the medical definition. We have reviewed several pieces of art (sculpture, painting and literature) across the history that might represent descriptions of dystonia, from ancient period to nowadays. In classic times, the first reference to abnormal postures can be tracked back to the new Empire of Egypt (equinus foot), not to mention some recently described examples of dystonia from the Moche sculptures in Peru or Veracruz culture from Mexico. In Middle Ages it is possible to find many examples of sculptures in European cathedrals representing peasants with dramatic, presumably dystonic postures that coexist with amputation of limbs. This unique combination of dystonia and limb amputation probably represents ergotism. The painters Brueghel, Ribera and Velazquez also represented figures with postures likely to be dystonic. Literature is also a source of precise pre-neurological descriptions, especially during the 19th century. In David Copperfield, Dickens depicts characters with generalized dystonia (Uriah Heep), cervical dystonia (Mr. Sharp) and spasmodic dysphonia (Mr Creakle). Finally, even in modern Art (19th and 20th centuries), there are dramatic descriptions of abnormal postures that are likely to be dystonic, such as painful cervical dystonia (Brancusi), cervical dystonia with sensory trick (Modigliani) and upper limb dystonia (Wyspianski). However some postures presented in works of art may simply be a form of artistic expression and only bear unintentional resemblance to the dystonic postures. Art may be a source of neurological information, and that includes primary and secondary dystonia. Copyright © 2015 Elsevier B.V. All rights reserved.

Human and Machine Entanglement in the Digital Archive: Academic Libraries and Socio-Technical Change

ERIC Educational Resources Information Center

Manoff, Marlene

2015-01-01

This essay urges a broadening of the discourse of library and information science (LIS) to address the convergence of forces shaping the information environment. It proposes adopting a model from the field of science studies that acknowledges the interdependence and coevolution of social, cultural, and material phenomena. Digital archives and…

Moving across Physical and Online Spaces: A Case Study in a Blended Primary Classroom

ERIC Educational Resources Information Center

Thibaut, Patricia; Curwood, Jen Scott; Carvalho, Lucila; Simpson, Alyson

2015-01-01

With the introduction of digital tools and online connectivity in primary schools, the shape of teaching and learning is shifting beyond the physical classroom. Drawing on the architecture of productive learning networks framework, we examine the affordances and limitations of an upper primary learning network and focus on how the digital and…

In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions.

PubMed

Ender, Andreas; Attin, Thomas; Mehl, Albert

2016-03-01

Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; digitized scannable vinylsiloxanether, VSES-D; and irreversible hydrocolloid, ALG) and 7 digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; Lava COS, LAV; Lava True Definition Scanner, T-Def; 3Shape Trios, TRI; and 3Shape Trios Color, TRC) techniques. Impressions were made 3 times each in 5 participants (N=15). The impressions were then compared within and between the test groups. The cast surfaces were measured point-to-point using the signed nearest neighbor method. Precision was calculated from the (90%-10%)/2 percentile value. The precision ranged from 12.3 μm (VSE) to 167.2 μm (ALG), with the highest precision in the VSE and VSES groups. The deviation pattern varied distinctly according to the impression method. Conventional impressions showed the highest accuracy across the complete dental arch in all groups, except for the ALG group. Conventional and digital impression methods differ significantly in the complete-arch accuracy. Digital impression systems had higher local deviations within the complete arch cast; however, they achieve equal and higher precision than some conventional impression materials. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

A Novel Methodology to Validate the Accuracy of Extraoral Dental Scanners and Digital Articulation Systems.

PubMed

Ellakwa, A; Elnajar, S; Littlefair, D; Sara, G

2018-05-03

The aim of the current study is to develop a novel method to investigate the accuracy of 3D scanners and digital articulation systems. An upper and a lower poured stone model were created by taking impression of fully dentate male (fifty years old) participant. Titanium spheres were added to the models to allow for an easily recognisable geometric shape for measurement after scanning and digital articulation. Measurements were obtained using a Coordinate Measuring Machine to record volumetric error, articulation error and clinical effect error. Three scanners were compared, including the Imetric 3D iScan d104i, Shining 3D AutoScan-DS100 and 3Shape D800, as well as their respective digital articulation software packages. Stoneglass Industries PDC digital articulation system was also applied to the Imetric scans for comparison with the CMM measurements. All the scans displayed low volumetric error (p⟩0.05), indicating that the scanners themselves had a minor contribution to the articulation and clinical effect errors. The PDC digital articulation system was found to deliver the lowest average errors, with good repeatability of results. The new measuring technique in the current study was able to assess the scanning and articulation accuracy of the four systems investigated. The PDC digital articulation system using Imetric scans was recommended as it displayed the lowest articulation error and clinical effect error with good repeatability. The low errors from the PDC system may have been due to its use of a 3D axis for alignment rather than the use of a best fit. Copyright© 2018 Dennis Barber Ltd.

Shaping Networked Theatre: Experience Architectures, Behaviours and Creative Pedagogies

ERIC Educational Resources Information Center

Sutton, Paul

2012-01-01

Since 2006 the UK based applied theatre company C&T has been using its experience and expertise in mixing drama, learning and digital media to create a new online utility for shaping collaborative educational drama experiences. C&T describes this practice as "Networked Theatre". This article describes both the motivations for…

3D digital headform models of Australian cyclists.

PubMed

Ellena, Thierry; Skals, Sebastian; Subic, Aleksandar; Mustafa, Helmy; Pang, Toh Yen

2017-03-01

Traditional 1D anthropometric data have been the primary source of information used by ergonomists for the dimensioning of head and facial gear. Although these data are simple to use and understand, they only provide univariate measures of key dimensions. 3D anthropometric data, however, describe the complete shape characteristics of the head surface, but are complicated to interpret due to the abundance of information they contain. Consequently, current headform standards based on 1D measurements may not adequately represent the actual head shape variations of the intended user groups. The purpose of this study was to introduce a set of new digital headform models representative of the adult cyclists' community in Australia. Four models were generated based on an Australian 3D anthropometric database of head shapes and a modified hierarchical clustering algorithm. Considerable shape differences were identified between our models and the current headforms from the Australian standard. We conclude that the design of head and facial gear based on current standards might not be favorable for optimal fitting results. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sculpting Ceramic Heads.

ERIC Educational Resources Information Center

Sapiro, Maurice

1983-01-01

Clay sculpture is difficult to produce because of the requirements of kiln firing. The problems can be overcome by modeling the original manikin head and making a plaster mold, pressing molding slabs of clay into the plaster mold to form the hollow clay armature, and sculpting on the armature. (IS)

Rock Art: Connecting to the Past.

ERIC Educational Resources Information Center

Knipe, Marianne

2001-01-01

Presents an activity for fourth-grade students in which they learn about ancient art and create their own authentic-looking rock sculptures with pictograms, or painted images. Explains how the students create their own rocks and then paint a pictograph on the rocks with brown paint. (CMK)

ARC-2010-ACD10-0047-002

NASA Image and Video Library

2010-03-09

ARC Sculpture by Peter Gutkin 'Nice Ice in New York' circa 1970's. This sculputre was donated to Ames Research Center by the artist. Peter Gutkin has designed special interiors, exhibits, and display furniture for Ames since 1979. He currently maintains an office in San Francisco, CA.

Forms of Soft Sculpture

ERIC Educational Resources Information Center

Tucker, Dorothy

1978-01-01

For the past several years, students at Madison Senior High School in San Diego have responded to the tactile texture and draping quality of soft materials. They experimented enthusiastically with three-dimensional forms made out of foam rubber. Here is the result of their efforts and experimentation. (Author/RK)

24 CFR 570.201 - Basic eligible activities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... provided for in § 570.207(a)(1).) In undertaking such activities, design features and improvements which... design features, and similar treatments intended to enhance the aesthetic quality of facilities and improvements receiving CDBG assistance, such as decorative pavements, railings, sculptures, pools of water and...

24 CFR 570.201 - Basic eligible activities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... provided for in § 570.207(a)(1).) In undertaking such activities, design features and improvements which... design features, and similar treatments intended to enhance the aesthetic quality of facilities and improvements receiving CDBG assistance, such as decorative pavements, railings, sculptures, pools of water and...

24 CFR 570.201 - Basic eligible activities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... provided for in § 570.207(a)(1).) In undertaking such activities, design features and improvements which... design features, and similar treatments intended to enhance the aesthetic quality of facilities and improvements receiving CDBG assistance, such as decorative pavements, railings, sculptures, pools of water and...

24 CFR 570.201 - Basic eligible activities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... provided for in § 570.207(a)(1).) In undertaking such activities, design features and improvements which... design features, and similar treatments intended to enhance the aesthetic quality of facilities and improvements receiving CDBG assistance, such as decorative pavements, railings, sculptures, pools of water and...

24 CFR 570.201 - Basic eligible activities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... provided for in § 570.207(a)(1).) In undertaking such activities, design features and improvements which... design features, and similar treatments intended to enhance the aesthetic quality of facilities and improvements receiving CDBG assistance, such as decorative pavements, railings, sculptures, pools of water and...

Exhibitions in Sight.

ERIC Educational Resources Information Center

Wasserman, Burton

1978-01-01

Early in the eighteenth century, Pompeii was discovered, a city that had been hidden for sixteen centuries by volcanic lava. There is a traveling exhibition of the sculptures, friezes, mosaics, and paintings being shown around the United States. Described is the history and contents of "Pompeii--A.D. 79." (RK)

Marching Monsters: Sculpture in Motion.

ERIC Educational Resources Information Center

Wolfe, George

1984-01-01

With a grant from the National Endowment for the Arts, teenage art club members made a 20-foot float called "Bad Seed," which they entered in a parade spoofing the Mardi Gras. It had a purple volcano drooling chartreuse lava while giving birth to a huge dragon. (RM)

Celebrating the Familiar: An Interview with Betty Spindler.

ERIC Educational Resources Information Center

Gamble, Harriet

2001-01-01

Presents an interview with ceramic artist, Betty Spindler, who overcame a learning disability and earned associate and bachelor degrees in art. Explains that she creates ceramic sculptures of fruits, vegetables, sandwiches, and other everyday items. Presents a project where children create their own fruit. (CMK)

Dream Spots and Thinking Rocks: Places for Contemplation.

ERIC Educational Resources Information Center

Zingher, Gary

1996-01-01

Presents examples from children's literature that illustrate types of special "thinking/dream spots." Suggests the following activities: creating a dream place in the library media center, describing or drawing a dream spot, designing a meditation room, making a sculpture garden, and writing monologs. (AEF)

How Many Chips off the Old Block?

ERIC Educational Resources Information Center

Koehler, Michael H.

2013-01-01

Students analyze a photograph to solve mathematical questions related to the images captured in the photograph. This month, photographs of a massive sculpture near the National Mall in Washington, D.C., provide opportunities for counting problems, generalizing from a pattern, and fitting a quadratic to data.

Chairs with Flair

ERIC Educational Resources Information Center

White, Carla Sabatino

2005-01-01

In the art lesson described in this article, students explore the arts of architecture, design, painting, and sculpture within four time periods: early colonial (1500-1700), late colonial (1700-1776), the quest for independence (1776-1860), and industrialization and growth (1860-1900). Through class discussion, readings, and slide presentations,…

Q&A: Cosmic gardener

NASA Astrophysics Data System (ADS)

Hoffman, Jascha

2011-05-01

Charles Jencks designs landscapes and sculptures to convey concepts in astronomy, biology and mathematics -- notably at CERN, Europe's particle-physics lab near Geneva, Switzerland, and in his Garden of Cosmic Speculation near Dumfries in Scotland, UK. On the launch of his new book, he discusses green architecture and metaphor.

Time-Resolved Photoluminescence Spectroscopy and Imaging: New Approaches to the Analysis of Cultural Heritage and Its Degradation

PubMed Central

Nevin, Austin; Cesaratto, Anna; Bellei, Sara; D'Andrea, Cosimo; Toniolo, Lucia; Valentini, Gianluca; Comelli, Daniela

2014-01-01

Applications of time-resolved photoluminescence spectroscopy (TRPL) and fluorescence lifetime imaging (FLIM) to the analysis of cultural heritage are presented. Examples range from historic wall paintings and stone sculptures to 20th century iconic design objects. A detailed description of the instrumentation developed and employed for analysis in the laboratory or in situ is given. Both instruments rely on a pulsed laser source coupled to a gated detection system, but differ in the type of information they provide. Applications of FLIM to the analysis of model samples and for the in-situ monitoring of works of art range from the analysis of organic materials and pigments in wall paintings, the detection of trace organic substances on stone sculptures, to the mapping of luminescence in late 19th century paintings. TRPL and FLIM are employed as sensors for the detection of the degradation of design objects made in plastic. Applications and avenues for future research are suggested. PMID:24699285

Non-invasive dendrochronology of late-medieval objects in Oslo: refinement of a technique and discoveries

NASA Astrophysics Data System (ADS)

Daly, Aoife; Streeton, Noëlle L. W.

2017-06-01

A technique for non-invasive dendrochronological analysis of oak was developed for archaeological material, using an industrial CT scanner. Since 2013, this experience has been extended within the scope of the research project `After the Black Death: Painting and Polychrome Sculpture in Norway'. The source material for the project is a collection of late-medieval winged altarpieces, shrines, polychrome sculpture, and fragments from Norwegian churches, which are owned by the Museum of Cultural History, University of Oslo. The majority cannot be sampled, and many are too large to fit into the CT scanner. For these reasons, a combined approach was adopted, utilizing CT scanning where possible, but preceded by an `exposed-wood' imaging technique. Both non-invasive techniques have yielded reliable results, and CT scanning has confirmed the reliability of the imaging technique alone. This paper presents the analytical methods, along with results from two of the 13 objects under investigation. Results for reliable dates and provenances provide new foundations for historical interpretations.

Digital Electronics for Nuclear Physics Experiments

NASA Astrophysics Data System (ADS)

Skulski, Wojtek; Hunter, David; Druszkiewicz, Eryk; Khaitan, Dev Ashish; Yin, Jun; Wolfs, Frank; SkuTek Instrumentation Team; Department of Physics; Astronomy, University of Rochester Team

2015-10-01

Future detectors in nuclear physics will use signal sampling as one of primary techniques of data acquisition. Using the digitized waveforms, the electronics can select events based on pulse shape, total energy, multiplicity, and the hit pattern. The DAQ for the LZ Dark Matter detector, now under development in Rochester, is a good example of the power of digital signal processing. This system, designed around 32-channel, FPGA-based, digital signal processors collects data from more than one thousand channels. The solutions developed for this DAQ can be applied to nuclear physics experiments. Supported by the Department of Energy Office of Science under Grant DE-SC0009543.

Bandwidth Efficient Wireless Digital Modem Developed

NASA Technical Reports Server (NTRS)

Kifle, Muli

1999-01-01

NASA Lewis Research Center has developed a digital approach for broadcasting highfidelity audio (nearly compact disk (CD) quality sound) in the commercial frequencymodulated (FM) broadcast band. This digital approach provides a means of achieving high data transmission rates with low hardware complexity--including low mass, size, and power consumption. Lewis has completed the design and prototype development of a bandwidth-efficient digital modem (modulator and demodulator) that uses a spectrally efficient modulation scheme: 16-ary rectangular quadrature amplitude modulation, or 16- ary QAM. The digital implementation is based strictly on inexpensive, commercial off-theshelf digital signal processing (DSP) hardware to perform up and down conversions and pulse shaping. The digital modem transmits data at rates up to 76 kilobits per second (kbps), which is almost 3 times faster than standard 28.8-kbps telephone modems. In addition, the modem offers improved power and spectral performance, flexible operation, and low-cost implementation.

Digital Storytelling in a Place-Based Composition Course

ERIC Educational Resources Information Center

Chisholm, James S.; Trent, Brandie

2014-01-01

Although the study of place in the fields of composition and education has a long and compelling history, the concept has taken on increased importance in today's digital landscape. As perceptions of places shift, we're challenged to understand how and which places shape who we are. Due to its potential power to leverage student choice,…

Shaping Youth Discourse about Technology: Technological Colonization, Manifest Destiny, and the Frontier Myth in Facebook's Public Pedagogy

ERIC Educational Resources Information Center

Freishtat, Richard L.; Sandlin, Jennifer A.

2010-01-01

As youths spend more time engaged in social media and informal learning experiences online, they interact with the public pedagogy of technological spaces. The public pedagogy of technological spaces, specifically Facebook, functions to create a "habitus" for the way youths act and respond in digital discourses and digital culture. This article…

Processing and Memory of Color, Contour, and Pattern Found in Computer Digitized Color Pictures for Elementary Children.

ERIC Educational Resources Information Center

Marschalek, Douglas G.

1988-01-01

Describes study of children in grades one, three, and five that examined their active processing and short term memory (STM) of color, contour, and interior pattern of shapes found in computer digitized pictures. Age-related differences are examined, and the role of processing visual information in the learning process is discussed. (12…

Digital Devices and Teaching the Whole Student: Developing and Validating an Instrument to Measure Educators' Attitudes and Beliefs

ERIC Educational Resources Information Center

Cho, Vincent; Littenberg-Tobias, Joshua

2016-01-01

Even as digital devices (e.g., tablets, smart phones, laptops) have become increasingly ubiquitous in schools, concerns have also been raised that such devices might hinder students' social, emotional, and personal development. Educators' perspectives on such matters could shape the success or failure of 1:1 technology initiatives. Thus, there is…

Digital pulse shape discrimination methods for n-γ separation in an EJ-301 liquid scintillation detector

NASA Astrophysics Data System (ADS)

Wan, Bo; Zhang, Xue-Ying; Chen, Liang; Ge, Hong-Lin; Ma, Fei; Zhang, Hong-Bin; Ju, Yong-Qin; Zhang, Yan-Bin; Li, Yan-Yan; Xu, Xiao-Wei

2015-11-01

A digital pulse shape discrimination system based on a programmable module NI-5772 has been established and tested with an EJ-301 liquid scintillation detector. The module was operated by running programs developed in LabVIEW, with a sampling frequency up to 1.6 GS/s. Standard gamma sources 22Na, 137Cs and 60Co were used to calibrate the EJ-301 liquid scintillation detector, and the gamma response function was obtained. Digital algorithms for the charge comparison method and zero-crossing method have been developed. The experimental results show that both digital signal processing (DSP) algorithms can discriminate neutrons from γ-rays. Moreover, the zero-crossing method shows better n-γ discrimination at 80 keVee and lower, whereas the charge comparison method gives better results at higher thresholds. In addition, the figure-of-merit (FOM) for detectors of two different dimensions were extracted at 9 energy thresholds, and it was found that the smaller detector presented better n-γ separation for fission neutrons. Supported by National Natural Science Foundation of China (91226107, 11305229) and the Strategic Priority Research Program of the Chinese Academy of Sciences (XDA03030300)

31. Photocopy of map. Insert from Master Plan Notes Prepared ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. Photocopy of map. Insert from Master Plan Notes Prepared by Environmental Planning and Design, Pittsburgh, Pa. Original at Missouri Botanical Garden. 1972 MASTER PLAN 32. 'THE TREE,' SCULPTURE BY ALEXANDER CALDER, 1966 - Missouri Botanical Garden, 2345 Tower Grove Avenue, Saint Louis, Independent City, MO

Teaching Flowers: A Photo Essay

ERIC Educational Resources Information Center

Hewson, Federico

2017-01-01

"Teaching Flowers" reflects on humanity's deep connections to horticulture by gathering varied thoughts from seminal writers in the field. In addition, this visual article draws attention to labor issues within the U.S. floral industry by documenting the author's exploration of flowers as social sculpture in New York City.

Teaching with Mark Dion

ERIC Educational Resources Information Center

Fusaro, Joe

2011-01-01

Mark Dion creates sculptures, installations, and interactive environments that sometimes seem contrary to what one expects from visual artists. Remarkable curiosity cabinets and carefully arranged artifacts from specific places and time periods make up a large part of his work. His work does not neatly fit into traditional lessons about elements…

Visual Arts and Academic Achievement

ERIC Educational Resources Information Center

Gibson, Marcia A.; Larson, Meredith A.

2007-01-01

The focus on academic performance testing in elementary schools has caused a decrease in student experience in the arts. Visual arts (drawing, painting, sculpture, and collage) have been minimized in elementary schools. Without exposure to the special avenues of cognitive development and personal expression nurtured by visual arts, students are…

Redefining the Tools of Art Therapy

ERIC Educational Resources Information Center

Thong, Sairalyn Ansano

2007-01-01

The premise of this paper is that computer-generated art is a valid therapeutic modality for empowering clients and fostering the therapeutic alliance. The author presents traditional art making methods (drawing, painting, photography, collage, and sculpture) combined or enhanced with photopaint programs and 3D computer modeling and animation…

Building Whales in Sand and Mind.

ERIC Educational Resources Information Center

Warner, Carolyn

1980-01-01

Describes two-week summer workshops on evolution, adaptation, and behavior of whales, conducted for children by Cold Spring Harbor Whaling Museum (New York), and culminating in creation of life-size sand sculptures of whales. Provides selected list of periodicals, teaching materials, identification guides, records, and societies devoted to whales…

History through Art and Architecture: Ancient Greek Architecture [and] Ancient Greek Sculpture. Teacher's Manual.

ERIC Educational Resources Information Center

Campbell, Ann

This document consists of two teaching manuals designed to accompany a commercially-available "multicultural, interdisciplinary video program," consisting of four still videotape programs (72 minutes, 226 frames), one teaching poster, and these two manuals. "Teacher's Manual: Ancient Greek Architecture" covers: "Ancient…

Close view of one of the pedimented pavilions on Fifteenth ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Close view of one of the pedimented pavilions on Fifteenth Street; the sculpture by James E. Fraser entitled "Mining" is set into the pediment - United States Department of Commerce, Bounded by Fourteenth, Fifteenth, and E streets and Constitution Avenue, Washington, District of Columbia, DC

Representing the Self in Sculpture

ERIC Educational Resources Information Center

Nelken, Miranda

2011-01-01

Deborah Rael-Buckley creates stunning figurative self-portraits in clay that layer "personal, cultural, historical, and biological imagery" in a narrative style. Her work provides an exciting challenge in three-dimensional self-portraits for eighth graders. In this article, the author suggests some exercises to get students brainstorming visual…

A Survey of European Robotics Research.

DTIC Science & Technology

1984-01-27

laboratory had an ASEA est in robotics began with kinetic robot, several machines for automatic sculpture design. He was looking at the forging, and an LSI 11...developed several tools which Davies had constructed two- and three- eased the programming of the ASEA robot. degrees-of-freedom hydraulic manipula

Shaping Crystal-Crystal Phase Transitions

NASA Astrophysics Data System (ADS)

Du, Xiyu; van Anders, Greg; Dshemuchadse, Julia; Glotzer, Sharon

Previous computational and experimental studies have shown self-assembled structure depends strongly on building block shape. New synthesis techniques have led to building blocks with reconfigurable shape and it has been demonstrated that building block reconfiguration can induce bulk structural reconfiguration. However, we do not understand systematically how this transition happens as a function of building block shape. Using a recently developed ``digital alchemy'' framework, we study the thermodynamics of shape-driven crystal-crystal transitions. We find examples of shape-driven bulk reconfiguration that are accompanied by first-order phase transitions, and bulk reconfiguration that occurs without any thermodynamic phase transition. Our results suggest that for well-chosen shapes and structures, there exist facile means of bulk reconfiguration, and that shape-driven bulk reconfiguration provides a viable mechanism for developing functional materials.

How digital design shapes political participation: A natural experiment with social information

PubMed Central

John, Peter; Margetts, Helen; Yasseri, Taha

2018-01-01

Political behaviour increasingly takes place on digital platforms, where people are presented with a range of social information—real-time feedback about the behaviour of peers and reference groups—which can stimulate (or depress) participation. This social information is hypothesized to impact the distribution of political activity, stimulating participation in mobilizations that are increasing in popularity, and depressing participation in those that appear to be less popular, leading to a non-normal distribution. Changes to these platforms can generate natural experiments allowing for an estimate of the impact of different kinds of social information on participation. This paper tests the hypothesis that social information shapes the distribution of political mobilizations by examining the introduction of trending information to the homepage of the UK government petition platform. The introduction of the trending feature did not increase the overall number of signatures per day, but the distribution of signatures across petitions changed significantly—the most popular petitions gained more signatures at the expense of those with fewer signatories. We further find significant differences between petitions trending at different ranks on the homepage. This evidence suggests that the ubiquity of trending information on digital platforms is introducing instability into political markets, as has been shown for cultural markets. As well as highlighting the importance of digital design in shaping political behaviour, the findings suggest that a non-negligible group of individuals visit the homepage of the site looking for petitions to sign, without having decided the issues they wish to support in advance. These ‘aimless petitioners’ are particularly susceptible to changes in social information. PMID:29702664

How digital design shapes political participation: A natural experiment with social information.

PubMed

Hale, Scott A; John, Peter; Margetts, Helen; Yasseri, Taha

2018-01-01

Political behaviour increasingly takes place on digital platforms, where people are presented with a range of social information-real-time feedback about the behaviour of peers and reference groups-which can stimulate (or depress) participation. This social information is hypothesized to impact the distribution of political activity, stimulating participation in mobilizations that are increasing in popularity, and depressing participation in those that appear to be less popular, leading to a non-normal distribution. Changes to these platforms can generate natural experiments allowing for an estimate of the impact of different kinds of social information on participation. This paper tests the hypothesis that social information shapes the distribution of political mobilizations by examining the introduction of trending information to the homepage of the UK government petition platform. The introduction of the trending feature did not increase the overall number of signatures per day, but the distribution of signatures across petitions changed significantly-the most popular petitions gained more signatures at the expense of those with fewer signatories. We further find significant differences between petitions trending at different ranks on the homepage. This evidence suggests that the ubiquity of trending information on digital platforms is introducing instability into political markets, as has been shown for cultural markets. As well as highlighting the importance of digital design in shaping political behaviour, the findings suggest that a non-negligible group of individuals visit the homepage of the site looking for petitions to sign, without having decided the issues they wish to support in advance. These 'aimless petitioners' are particularly susceptible to changes in social information.

Digital holographic microscopy applied to measurement of a flow in a T-shaped micromixer

NASA Astrophysics Data System (ADS)

Ooms, T. A.; Lindken, R.; Westerweel, J.

2009-12-01

In this paper, we describe measurements of a three-dimensional (3D) flow in a T-shaped micromixer by means of digital holographic microscopy. Imaging tracer particles in a microscopic flow with conventional microscopy is accompanied by a small depth-of-field, which hinders true volumetric flow measurements. In holographic microscopy, the depth of the measurement domain does not have this limitation because any desired image plane can be reconstructed after recording. Our digital holographic microscope (DHM) consists of a conventional in-line recording system with an added magnifying optical element. The measured flow velocity and the calculated vorticity illustrate four streamwise vortices in the micromixer outflow channel. Because the investigated flow is stationary and strongly 3D, the DHM performance (i.e. accuracy and resolution) can be precisely investigated. The obtained Dynamic spatial range and Dynamic velocity range are larger than 20 and 30, respectively. High-speed multiple-frame measurements illustrate the capability to simultaneously track about 80 particles in a volumetric measurement domain.

Tuning the Thermochemical Properties of Oxonol Dyes for Digital Versatile Disc Recordable: Reduction of Thermal Interference in High-Speed Recording

NASA Astrophysics Data System (ADS)

Morishima, Shin-Ichi; Wariishi, Koji; Mikoshiba, Hisashi; Inagaki, Yoshio; Shibata, Michihiro; Hashimoto, Hirokazu; Kubo, Hiroshi

To reduce thermal interference between adjacent recording marks on a recordable digital versatile disc, we examined the thermochemical behavior of oxonol dyes for digital versatile disc recordable (DVD-R). We found that oxonol dyes with Meldrum's acid skeleton exhibited an abrupt reduction in weight with increasing temperature without generating excessive heat that is the fundamental cause of thermal interference. DVD-R with the oxonol dyes suppressed fluctuation in the shapes of recorded marks, thereby attaining compatibility with high-speed recording.

A first experience with digital complete overdentures.

PubMed

Bajunaid, Salwa Omar

2016-07-01

The development of computer-aided design/computer-aided manufacturing systems for dentistry in the 1980s resulted in the successful fabrication of crowns, fixed dental prostheses, and superstructures for both natural teeth and dental implants. Today, this technology is available for constructing digitally designed and milled, completely removable dental prostheses. The procedure uses clinical and laboratory protocols that allow fabrication of completely removable prostheses within two clinical appointments. The aim of this clinical report is to present the author's first experience with digital complete overdentures, the practicality of this technology, and patient feedback. Compared with conventional overdentures, the fit of the digital prostheses was improved because the cameo and flanges of the prostheses were nicely shaped and rolled, and this enhanced their stability and retention. Occlusion was also excellent. However, aesthetics in terms of the alignment, shape, and size of the maxillary overdenture teeth were inacceptable. Despite some of the drawbacks identified in our study, the use of removable digital dentures does provide excellent adaptation of the denture base and requires fewer clinic visits. We anticipate that the unsatisfactory aesthetic outcomes presented in this report can be corrected with more experience. We also believe that acquiring an in-house scanning machine would be beneficial. We highly recommend including this technique in dental school curriculums at both the undergraduate and graduate levels in order to keep students and residents up to date on the latest technology available.

Digital holographic measurements of shape and 3D sound-induced displacements of Tympanic Membrane

PubMed Central

Lu, Weina; Dobrev, Ivo; Cheng, Jeffrey Tao; Furlong, Cosme; Rosowski, John J

2014-01-01

Acoustically-induced vibrations of the Tympanic Membrane (TM) play a primary role in the hearing process, in that these motions are the initial mechanical response of the ear to airborne sound. Characterization of the shape and 3D displacement patterns of the TM is a crucial step to a better understanding of the complicated mechanics of sound reception by the ear. In this paper, shape and sound-induced 3D displacements of the TM in cadaveric chinchillas are measured by a lensless Dual-Wavelength Digital Holography system (DWDHS). The DWDHS consists of Laser Delivery (LD), Optical Head (OH), and Computing Platform (CP) subsystems. Shape measurements are performed in double-exposure mode and with the use of two wavelengths of a tunable laser while nanometer-scale displacements are measured along a single sensitivity direction and with a constant wavelength. In order to extract the three principal components of displacement in full-field-of-view, and taking into consideration the anatomical dimensions of the TM, we combine principles of thin-shell theory together with both, displacement measurements along the single sensitivity vector and TM surface shape. To computationally test this approach, Finite Element Methods (FEM) are applied to the study of artificial geometries. PMID:24790255

Digital holographic measurements of shape and three-dimensional sound-induced displacements of tympanic membrane

NASA Astrophysics Data System (ADS)

Khaleghi, Morteza; Lu, Weina; Dobrev, Ivo; Cheng, Jeffrey Tao; Furlong, Cosme; Rosowski, John J.

2013-10-01

Acoustically induced vibrations of the tympanic membrane (TM) play a primary role in the hearing process, in that these motions are the initial mechanical response of the ear to airborne sound. Characterization of the shape and three-dimensional (3-D) displacement patterns of the TM is a crucial step to a better understanding of the complicated mechanics of sound reception by the ear. Sound-induced 3-D displacements of the TM are estimated from shape and one-dimensional displacements measured in cadaveric chinchillas using a lensless dual-wavelength digital holography system (DWDHS). The DWDHS consists of laser delivery, optical head, and computing platform subsystems. Shape measurements are performed in double-exposure mode with the use of two wavelengths of a tunable laser, while nanometer-scale displacements are measured along a single sensitivity direction with a constant wavelength. Taking into consideration the geometrical and dimensional constrains imposed by the anatomy of the TM, we combine principles of thin-shell theory together with displacement measurements along a single sensitivity vector and TM surface shape to extract the three principal components of displacement in the full-field-of-view. We test, validate, and identify limitations of this approach via the application of finite element method to artificial geometries.

Sex determination by three-dimensional geometric morphometrics of the palate and cranial base.

PubMed

Chovalopoulou, Maria-Eleni; Valakos, Efstratios D; Manolis, Sotiris K

2013-01-01

The purpose of this study is to assess sexual dimorphism in the palate and base of adult crania using three-dimensional geometric morphometric methods. The study sample consisted of 176 crania of known sex (94 males, 82 females) belonging to individuals who lived during the 20th century in Greece. The three-dimensional co-ordinates of 30 ectocranial landmarks were digitized using a MicroScribe 3DX contact digitizer. Generalized Procrustes Analysis (GPA) was used to obtain size and shape variables for statistical analysis. Three discriminant function analyses were carried out: (1) using PC scores from Procrustes shape space, (2) centroid size alone, and (3) PC scores of GPA residuals which includes InCS for analysis in Procrustes form space. Results indicate that there are shape differences between sexes. In males, the palate is deepest and more elongated; the cranial base is shortened. Sex-specific shape differences for the cross-validated data give better classification results in the cranial base (77.2%) compared with the palate (68.9%). Size alone yielded better results for cranial base (82%) in opposition to palate (63.1%). As anticipated, the classification accuracy improves when both size and shape are combined (90.4% for cranial base, and 74.8% for palate).

Distractor objects affect fingers' angular distances but not fingers' shaping during grasping.

PubMed

Ansuini, Caterina; Tognin, Veronica; Turella, Luca; Castiello, Umberto

2007-04-01

The aim of the present study was to determine whether and how hand shaping was affected by the presence of a distractor object adjacent to the to-be-grasped object. Twenty subjects were requested to reach towards and grasp a 'convex' or a 'concave' object in the presence or absence of a distractor object either of the same or different shape than the target object. Flexion/extension at the metacarpal-phalangeal (MCP) and proximal interphalangeal joints of all digits, and abduction angle between digits were measured by resistive sensors embedded in a glove. The results indicate robust interference effects at the level of reach duration and the extent of fingers' abduction angles together with changes at the level of a single joint for the thumb. No distractor effects on individual fingers' joints except for the MCP of the middle and little fingers were found. These findings suggest that the presence of distractor object affects hand shaping in terms of fingers' abduction angles, but not at the level of 'shape dependent' fingers' angular excursions. Furthermore, they support the importance of the thumb for the guidance of selective reach-to-grasp movements. We discuss these results in the context of current theories proposed to explain the object selection processes underlying the control of hand action.

The Cucurbits of Mediterranean Antiquity: Identification of Taxa from Ancient Images and Descriptions

PubMed Central

Janick, Jules; Paris, Harry S.; Parrish, David C.

2007-01-01

Background A critical analysis was made of cucurbit descriptions in Dioscorides' De Materia Medica, Columella's De Re Rustica and Pliny's Historia Naturalis, works on medicine, agriculture and natural science of the 1st century ce, as well as the Mishna and Tosefta, compilations of rabbinic law derived from the same time period together with cucurbit images dating from antiquity including paintings, mosaics and sculpture. The goal was to identify taxonomically the Mediterranean cucurbits at the time of the Roman Empire. Findings By ancient times, long-fruited forms of Cucumis melo (melon) and Lagenaria siceraria (bottle gourd) were selected, cultivated and used as vegetables around the Mediterranean and, in addition, bottle-shaped fruits of L. siceraria were employed as vessels. Citrullus lanatus (watermelons) and round-fruited forms of Cucumis melo (melons) were also consumed, but less commonly. A number of cucurbit species, including Bryonia alba, B. dioica, Citrullus colocynthis and Ecballium elaterium, were employed for medicinal purposes. No unequivocal evidence was found to suggest the presence of Cucumis sativus (cucumber) in the Mediterranean area during this era. The cucumis of Columella and Pliny was not cucumber, as commonly translated, but Cucumis melo subsp. melo Flexuosus Group (snake melon or vegetable melon). PMID:17932073

Adapting line integral convolution for fabricating artistic virtual environment

NASA Astrophysics Data System (ADS)

Lee, Jiunn-Shyan; Wang, Chung-Ming

2003-04-01

Vector field occurs not only extensively in scientific applications but also in treasured art such as sculptures and paintings. Artist depicts our natural environment stressing valued directional feature besides color and shape information. Line integral convolution (LIC), developed for imaging vector field in scientific visualization, has potential of producing directional image. In this paper we present several techniques of exploring LIC techniques to generate impressionistic images forming artistic virtual environment. We take advantage of directional information given by a photograph, and incorporate many investigations to the work including non-photorealistic shading technique and statistical detail control. In particular, the non-photorealistic shading technique blends cool and warm colors into the photograph to imitate artists painting convention. Besides, we adopt statistical technique controlling integral length according to image variance to preserve details. Furthermore, we also propose method for generating a series of mip-maps, which revealing constant strokes under multi-resolution viewing and achieving frame coherence in an interactive walkthrough system. The experimental results show merits of emulating satisfyingly and computing efficiently, as a consequence, relying on the proposed technique successfully fabricates a wide category of non-photorealistic rendering (NPR) application such as interactive virtual environment with artistic perception.

The Importance of Creativity in Family Therapy: A Preliminary Consideration.

ERIC Educational Resources Information Center

Carson, David K.

1999-01-01

Looks at the importance of creativity in the context of family therapy. Examines creative techniques such as family sculpturing, family art therapy, puppetry, family drawings, and psychodrama. Focuses on the concept of creativity in prominent theories of counseling (i.e., humanistic, Gestalt, cognitive psychology) and the relation of divergent…

Casey Doyle: Artist at Play

ERIC Educational Resources Information Center

Sanders, James H., III; Doyle, Casey

2008-01-01

The article discusses the work of Casey Doyle, and the narrative metaphors and personal explorations that inform his sculptures and how, for his undergraduate thesis, he selected a body of work whose central theme explores his identity as a gay man, informing his relationships with family, friends and society. (Contains 5 figures.)

Rinse, Reuse and Scream

ERIC Educational Resources Information Center

Sutley, Jane

2009-01-01

The author of this article describes how her eighth grade art students heighten their awareness of differences between their public self and their inner self by: manipulating water bottles to create sculptural self-portraits; constructing armatures of the generic person in "The Scream" by Edward Munch; finding and collecting examples of images and…

Finding Meaning in the Details

ERIC Educational Resources Information Center

Boyle, Sharon McKittrick

2011-01-01

In this article, the author describes an art project inspired by the work of the Canadian artist, Calvin Nicholls, who makes amazing low-relief sculptures from archival paper. Student works include owls in flight, a hawk, a kingfisher, a rat on a chain, a moth, and other creatures. (Contains 1 online resource.)

Using Quenching to Detect Corrosion on Sculptural Metalwork: A Real-World Application of Fluorescence Spectroscopy

ERIC Educational Resources Information Center

Hensen, Cory; Clare, Tami Lasseter; Barbera, Jack

2018-01-01

Fluorescence spectroscopy experiments are a frequently taught as part of upper-division teaching laboratories. To expose undergraduate students to an applied fluorescence technique, a corrosion detection method, using quenching, was adapted from authentic research for an instrumental analysis laboratory. In the experiment, students acquire…

Got Sheetrock?

ERIC Educational Resources Information Center

Sheehan, Diane B.

2005-01-01

The author of this article, an art teacher, describes a high school studio lesson about sculptural reliefs using Sheetrock. She describes how students can work with and prepare Sheetrock and how they can create a design and transfer it onto the dry Sheetrock plaster. Making repairs to the surface, coloring and finishing, and the tools required are…

The Holocaust Memorial Sculpture Project: An Artist's Tale

ERIC Educational Resources Information Center

Houlihan, Elena Hiatt

2005-01-01

This article describes a school residency project which balloons in complexity, difficulty and meaning--making the incomprehensible tangible. The project had started in the spring of 1996, when the social studies teacher of Community Day School in Pittsburgh, Pennsylvania, Mr. Bill Walter, wanted the students to understand the enormity of the…

Modeling in Ceramic Clay

ERIC Educational Resources Information Center

Miller, Louis J.

1976-01-01

Modeling is an additive process of building up a sculpture with some plastic material like clay. It affords the student an opportunity to work in three dimensions, a creative relief from the general two-dimensional drawing and design activities that occupy a large segment of time in the art curriculum. (Author/RK)

Concealed/Revealed

ERIC Educational Resources Information Center

Parsons, Kate

2005-01-01

This article deals with a cross-cultural, interdisciplinary approach to sculpture in a practice-based PhD. The research centred on context in relationship to the Giriama Commemorative Grave Posts of Kenya and my art practice in the UK. This heuristic investigation culminated in the construction of wall and floor fragments relating to vernacular…

A Case for Advanced Skills and Employability in Higher Education.

ERIC Educational Resources Information Center

Holmes, Alison; Miller, Stuart

2000-01-01

Case Studies to Advance Skills and Employability is a project designed to introduce a vocational dimension into academic curriculum. Key employability skills are developed as students work on real-life case situations in such areas as public sculpture, waste management, human organizations, and environmental issues. (SK)

From Iconic to Lingual: Interpreting Visual Statements.

ERIC Educational Resources Information Center

Curtiss, Deborah

In this age of proliferating visual communications, there is a permissiveness in subject matter, content, and meaning that is exhilarating, yet overwhelming to interpret in a meaningful or consensual way. By recognizing visual statements, whether a piece of sculpture, an advertisement, a video, or a building, as communication, one can approach…

Welcome to Minnesota

ERIC Educational Resources Information Center

Nelson, Dawn

2011-01-01

There is more than snow in Minnesota: Summer brings the Aquatennial with sandcastle competitions, milk-carton-boat races and a torchlight parade, and the St. Paul Winter Carnival has ice carving and snow sculptures and another torchlight parade. But natives and visitors alike note that their favorite season is autumn, which in Minnesota brings…

Surgical correction of the cauliflower ear.

PubMed

Vogelin, E; Grobbelaar, A O; Chana, J S; Gault, D T

1998-07-01

The cauliflower ear presents a challenge to the surgeon. Patients complain of discomfort and appearance. Three patients were treated surgically via a posterior approach to remove the hardened segment and re-sculpture a leaf of cartilage left in place. An acceptable cosmetic result was achieved and all patients are currently pain free.

Polyhedral Sculpture: The Path from Computational Artifact to Real-World Mathematical Object.

ERIC Educational Resources Information Center

Eisenberg, Michael; Nishioka, Ann

Mathematics educators often despair at math's austere, "abstract" reputation. This paper describes recent work in developing an application named "HyperGami," which is designed to integrate both the abstract and"real-world" aspects of mathematics by allowing children to design and construct polyhedral models and…

Spotlight on Young Children and the Creative Arts

ERIC Educational Resources Information Center

Koralek, Derry

2005-01-01

The creative arts--including music, movement, dramatic play, puppetry, painting, sculpture, and drawing--are a crucial part of early childhood. Not only do the arts allow children to express themselves, but creative activity can enhance development of children's skills in literacy, science, math, social studies, and more. This engaging collection…

PLANNING AN ART ROOM.

ERIC Educational Resources Information Center

KROEGER, GARY

THIS GUIDE IS INTENDED TO PROVIDE SUGGESTIONS IN PLANNING ART FACILITIES FOR ELEMENTARY AND SECONDARY SCHOOLS. AREAS PROVIDED FOR ARE (1) DRAWING AND PAINTING, (2) GRAPHIC ARTS, (3) GENERAL CRAFTS, (4) MODELING, AND (5) SCULPTURING. WORK CENTERS CAN BE PLANNED IN RELATION TO TRAFFIC FLOW. AT JUNIOR HIGH LEVEL, 24 STUDENTS ARE BEST ACCOMMODATED FOR…

Sculpturing new muscle phenotypes

NASA Technical Reports Server (NTRS)

Babij, P.; Booth, F. W.

1988-01-01

Changes in the pattern of muscle activity are followed by new patterns of protein synthesis, both in the contractile elements and in the enzymes of energy metabolism. Although the signal transducers have not been identified, techniques of molecular biology have clearly shown that the adaptive responses are the regulated consequence of differential gene expression.

Art and Psychopathology: The Message of Outsider Art.

ERIC Educational Resources Information Center

Esman, Aaron H.

1988-01-01

The relationship between art and mental illness is examined in the untrained "outsider artist," one whose style, though highly idiosyncratic, conforms to certain formal criteria and is usually initiated at a time of intense psychic crisis. Photographs and discussions of the paintings and sculptures of psychotic artists are presented. (JW)

[The representation of physical pain in art and the Greek escultural group of the Laocoonte].

PubMed

Roqué, M H; Ruival, C; Roqué, C M

2006-01-01

It makes reference to the symptoms and signs of external pain and internal man suffering, masterly represented on marble by greek sculptors of Ancient Greece. A demonstration of the importance of literature and sculpture as an humanistic complement for teaching History of Medicine.

Packing Products: Polystyrene vs. Cornstarch

ERIC Educational Resources Information Center

Starr, Suzanne

2009-01-01

Packing materials such as polystyrene take thousands of years to decompose, whereas packing peanuts made from cornstarch, which some companies are now using, can serve the same purpose, but dissolve in water. The author illustrates this point to her class one rainy day using the sculptures students made from polystyrene and with the cornstarch…

Computer Art--A New Tool in Advertising Graphics.

ERIC Educational Resources Information Center

Wassmuth, Birgit L.

Using computers to produce art began with scientists, mathematicians, and individuals with strong technical backgrounds who used the graphic material as visualizations of data in technical fields. People are using computer art in advertising, as well as in painting; sculpture; music; textile, product, industrial, and interior design; architecture;…

The From Scratch Rhythm Workbook. Revised Edition.

ERIC Educational Resources Information Center

Dadson, Philip; McGlashan, Don

Since its formation in 1974, the renowned performing group, "From Scratch," has developed a distinctive style of music using sophisticated rhythmic language and unique sculptural instruments. The group's experiences have been transformed into the exercises and game forms presented in this workbook. The hands-on workbook uses a body-based…

Three-Dimensional Printing: A Journey in Visualization

ERIC Educational Resources Information Center

Poetzel, Adam; Muskin, Joseph; Munroe, Anne; Russell, Craig

2012-01-01

Imagine high school students glued to computer screens--not playing video games but applying their mathematical knowledge of functions to the design of three-dimensional sculptures. Imagine these students engaging in rich discourse as they transform functions of their choosing to design unique creations. Now, imagine these students using…

Perseus Project: Interactive Teaching and Research Tools for Ancient Greek Civilization.

ERIC Educational Resources Information Center

Crane, Gregory; Harward, V. Judson

1987-01-01

Describes the Perseus Project, an educational program utilizing computer technology to study ancient Greek civilization. Including approximately 10 percent of all ancient literature and visual information on architecture, sculpture, ceramics, topography, and archaeology, the project spans a range of disciplines. States that Perseus fuels student…

Art is for All; Arts and Crafts for Less Able Children.

ERIC Educational Resources Information Center

Lindsay, Zaidee

Art activities for educationally subnormal children are presented in the areas of painting, carving, printing, paper construction, mosaics, collages, paper and wire sculpture, embroidery, and a puppet theatre. Seventy-two illustrations provide examples of students' work for each area; suggestions for teachers are included. (RD)

Anterior dental aesthetics: dentofacial perspective.

PubMed

Ahmad, I

2005-07-23

The purpose of this series is to convey the principles governing our aesthetic senses. Usually meaning visual perception, aesthetics is not merely limited to the ocular apparatus. The concept of aesthetics encompasses both the time-arts such as music, theatre, literature and film, as well as space-arts such as paintings, sculpture and architecture.

Anterior dental aesthetics: Dental perspective.

PubMed

Ahmad, I

2005-08-13

The purpose of this series is to convey the principles governing our aesthetic senses. Usually meaning visual perception, aesthetics is not merely limited to the ocular apparatus. The concept of aesthetics encompasses both the time-arts such as music, theatre, literature and film, as well as space-arts such as paintings, sculpture and architecture.

Anterior dental aesthetics: gingival perspective.

PubMed

Ahmad, I

2005-08-27

The purpose of this series is to convey the principles governing our aesthetic senses. Usually meaning visual perception, aesthetics is not merely limited to the ocular apparatus. The concept of aesthetics encompasses both the time-arts such as music, theatre, literature and film, as well as space-arts such as paintings, sculpture and architecture.

Anterior dental aesthetics: historical perspective.

PubMed

Ahmad, I

2005-06-25

The purpose of this series is to convey the principles governing our aesthetic senses. Usually meaning visual perception, aesthetics is not merely limited to the ocular apparatus. The concept of aesthetics encompasses both the time - arts such as music, theatre, literature and film, as well as space - arts such as paintings, sculpture and architecture.

Anterior dental aesthetics: facial perspective.

PubMed

Ahmad, I

2005-07-09

The purpose of this series is to convey the principles governing our aesthetic senses. Usually meaning visual perception, aesthetics is not merely limited to the ocular apparatus. The concept of aesthetics encompasses both the time-arts such as music, theatre, literature and film, as well as space-arts such as paintings, sculpture and architecture.

Clay Houses

ERIC Educational Resources Information Center

Pedro, Cathy

2011-01-01

In this article, the author describes a project designed for fourth-graders that involves making clay relief sculptures of houses. Knowing the clay houses will become a family heirloom makes this lesson even more worth the time. It takes three classes to plan and form the clay, and another two to underglaze and glaze the final products.

An Arts Activities Approach: Counseling the Gifted, Creative, and Talented.

ERIC Educational Resources Information Center

Kenny, Adele

1987-01-01

The visual arts can be employed as a counseling vehicle for gifted, creative, and talented students. Color, image proportion, subject matter, and texture in student art facilitate assessment and guidance. Craft, drawing, painting, photography, printing, design, and sculpture activities which could help in this process are briefly described. (CB)

Brian Honyouti: Send in the Clowns

ERIC Educational Resources Information Center

Pearlstone, Zena

2012-01-01

Hopi Brian Honyouti's "clown" sculptures stem from his personal and political views and comment on commercialism, big business, greed, over indulgence, and irresponsible and sexual behavior. This essay explores the meaning of these carvings to Honyouti, to Hopiit, and to the buying public, as well as their relationship to "tithu," the carved…

19 CFR 12.109 - Seizure and forfeiture.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Seizure and forfeiture. 12.109 Section 12.109 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE... § 12.109 Seizure and forfeiture. (a) Whenever any pre-Columbian monumental or architectural sculpture...

The Ins and Outs of Relief Casting.

ERIC Educational Resources Information Center

Greene, Yvonne

2000-01-01

Describes a unit on clay casting that introduces students to relief sculpture. The unit takes three 45 to 50 minute class periods three weeks apart. Discusses each class session in detail: (1) creating the casting; (2) turning out and rinsing the casting; and (3) enriching the surface with color. (CMK)

Pythagoras' Canvas

ERIC Educational Resources Information Center

Musto, Garrod

2009-01-01

This article seeks to provide an insight into little known numerical methods for deriving meaning from ancient sacred texts to give an understanding of some of the symbolism contained in the wonderful artwork and sculptures of Venetian artist Tobia Rava. The author describes how he used Rava's artwork to inspire a multi-faceted mathematics…

Teaching Art with Art: Grotesque Visions.

ERIC Educational Resources Information Center

Hubbard, Guy

2001-01-01

Discusses a type of visual art called grotesque art and includes four different examples of grotesque art: (1) the painting "Head of Medusa" by Peter Paul Rubens; (2) Rangda, the widow witch from Bali (Indonesia); (3) totem poles; and (4) grotesque sculptures from the Cathedral of Notre Dame (Paris, France). (CMK)

Middle Level Learning Volume 49

ERIC Educational Resources Information Center

Lapham, Steven S.; Reader, David; Houting, Beth A. Twiss; Moloshok, Rachel

2014-01-01

This article presents two lessons. The first one is "Carved in Stone: The Preamble to the Constitution" by Steven S. Lapham. In 1937, the Works Progress Administration (WPA) commissioned artist Lenore Thomas to create some sculptures for the planned community of Greenbelt, Maryland. Part of her work consisted of bas-relief friezes on the…

Monkey Business

ERIC Educational Resources Information Center

Blackwood, Christine Horvatis

2012-01-01

A ballerina, a gladiator, a camper, a baseball player, a surfer, and a shopper; these are just a few of the amazing monkeys that the author's seventh graders created from papier-mache. This project provided an opportunity for students to express themselves through the creation of sculptural characters based on their own interests, hobbies, and…

What Gets Your Goat? Art across the Curriculum.

ERIC Educational Resources Information Center

Sartorius, Tara Cady

2000-01-01

Features Elayne Goodman's mixed-media sculpture "The Goat Castle in Natchez," which is dedicated to a whodunnit murder mystery in Mississippi. Provides historical background of the murder and information on Goodman's life. Includes activities in history and social science, mathematics, science, language arts, visual arts, and economics and social…

CREATIVE ACTIVITIES FOR EVERY SCHOOL.

ERIC Educational Resources Information Center

WALSH, ROSALIA

SUGGESTIONS FOR CREATIVE ACTIVITIES IN THE ELEMENTARY GRADES ARE PRESENTED. THE SUBJECTS OUTLINED ARE CREATIVE ART, CREATIVE DRAMA, CREATIVE THINKING, CREATIVE WRITING AND CREATIVE MATH. UNDER EACH HEADING ACTIVITIES AND THE MATERIALS NEEDED WERE LISTED. AN EXAMPLE OF AN ACTIVITY IN CREATIVE ART IS BOX SCULPTURE, THE MATERIALS NEEDED WERE AN…

Humanities in the High School Classroom.

ERIC Educational Resources Information Center

Stawski, Conrad

A humanities course that teaches an appreciation of tradition and culture through the visual arts includes consideration of contemporary art as well as classic paintings and sculpture. Study of Leonardo DaVinci's "Last Supper" provides an exercise in the intellectual approach to religious painting, while the portrait of Mona Lisa by the same…

Sublime Science

ERIC Educational Resources Information Center

Girod, Mark

2007-01-01

One of the shortcomings in most efforts to integrate art and science is that many people have a shallow understanding of art, which inevitably leads to shallow connections between art and science. Coloring drawings of planets, building sculptures of volcanoes, and decorating scientific diagrams are fine activities, but they do not link science and…

Spatiotemporal distribution of location and object effects in reach-to-grasp kinematics

PubMed Central

Rouse, Adam G.

2015-01-01

In reaching to grasp an object, the arm transports the hand to the intended location as the hand shapes to grasp the object. Prior studies that tracked arm endpoint and grip aperture have shown that reaching and grasping, while proceeding in parallel, are interdependent to some degree. Other studies of reaching and grasping that have examined the joint angles of all five digits as the hand shapes to grasp various objects have not tracked the joint angles of the arm as well. We, therefore, examined 22 joint angles from the shoulder to the five digits as monkeys reached, grasped, and manipulated in a task that dissociated location and object. We quantified the extent to which each angle varied depending on location, on object, and on their interaction, all as a function of time. Although joint angles varied depending on both location and object beginning early in the movement, an early phase of location effects in joint angles from the shoulder to the digits was followed by a later phase in which object effects predominated at all joint angles distal to the shoulder. Interaction effects were relatively small throughout the reach-to-grasp. Whereas reach trajectory was influenced substantially by the object, grasp shape was comparatively invariant to location. Our observations suggest that neural control of reach-to-grasp may occur largely in two sequential phases: the first determining the location to which the arm transports the hand, and the second shaping the entire upper extremity to grasp and manipulate the object. PMID:26445870

Digital computer program DF1758 fully coupled natural frequencies and mode shapes of a helicopter rotor blade

NASA Technical Reports Server (NTRS)

Bennett, R. L.

1975-01-01

The analytical techniques and computer program developed in the fully-coupled rotor vibration study are described. The rotor blade natural frequency and mode shape analysis was implemented in a digital computer program designated DF1758. The program computes collective, cyclic, and scissor modes for a single blade within a specified range of frequency for specified values of rotor RPM and collective angle. The analysis includes effects of blade twist, cg offset from reference axis, and shear center offset from reference axis. Coupled inplane, out-of-plane, and torsional vibrations are considered. Normalized displacements, shear forces and moments may be printed out and Calcomp plots of natural frequencies as a function of rotor RPM may be produced.

Implementing transmission eigenchannels of disordered media by a binary-control digital micromirror device

NASA Astrophysics Data System (ADS)

Kim, Donggyu; Choi, Wonjun; Kim, Moonseok; Moon, Jungho; Seo, Keumyoung; Ju, Sanghyun; Choi, Wonshik

2014-11-01

We report a method for measuring the transmission matrix of a disordered medium using a binary-control of a digital micromirror device (DMD). With knowledge of the measured transmission matrix, we identified the transmission eigenchannels of the medium. We then used binary control of the DMD to shape the wavefront of incident waves and to experimentally couple light to individual eigenchannels. When the wave was coupled to the eigenchannel with the largest eigenvalue, in particular, we were able to achieve about two times more energy transmission than the mean transmittance of the medium. Our study provides an elaborated use of the DMD as a high-speed wavefront shaping device for controlling the multiple scattering of waves in highly scattering media.

Fast neutron flux analyzer with real-time digital pulse shape discrimination

NASA Astrophysics Data System (ADS)

Ivanova, A. A.; Zubarev, P. V.; Ivanenko, S. V.; Khilchenko, A. D.; Kotelnikov, A. I.; Polosatkin, S. V.; Puryga, E. A.; Shvyrev, V. G.; Sulyaev, Yu. S.

2016-08-01

Investigation of subthermonuclear plasma confinement and heating in magnetic fusion devices such as GOL-3 and GDT at the Budker Institute (Novosibirsk, Russia) requires sophisticated equipment for neutron-, gamma- diagnostics and upgrading data acquisition systems with online data processing. Measurement of fast neutron flux with stilbene scintillation detectors raised the problem of discrimination of the neutrons (n) from background cosmic particles (muons) and neutron-induced gamma rays (γ). This paper describes a fast neutron flux analyzer with real-time digital pulse-shape discrimination (DPSD) algorithm FPGA-implemented for the GOL-3 and GDT devices. This analyzer was tested and calibrated with the help of 137Cs and 252Cf radiation sources. The Figures of Merit (FOM) calculated for different energy cuts are presented.

A real-time n/γ digital pulse shape discriminator based on FPGA.

PubMed

Li, Shiping; Xu, Xiufeng; Cao, Hongrui; Yuan, Guoliang; Yang, Qingwei; Yin, Zejie

2013-02-01

A FPGA-based real-time digital pulse shape discriminator has been employed to distinguish between neutrons (n) and gammas (γ) in the Neutron Flux Monitor (NFM) for International Thermonuclear Experimental Reactor (ITER). The discriminator takes advantages of the Field Programmable Gate Array (FPGA) parallel and pipeline process capabilities to carry out the real-time sifting of neutrons in n/γ mixed radiation fields, and uses the rise time and amplitude inspection techniques simultaneously as the discrimination algorithm to observe good n/γ separation. Some experimental results have been presented which show that this discriminator can realize the anticipated goals of NFM perfectly with its excellent discrimination quality and zero dead time. Copyright © 2012 Elsevier Ltd. All rights reserved.

Improvement of the energy resolution via an optimized digital signal processing in GERDA Phase I

DOE PAGES

Agostini, M.; Allardt, M.; Bakalyarov, A. M.; ...

2015-06-09

An optimized digital shaping filter has been developed for the Gerda experiment which searches for neutrinoless double beta decay inmore » $$^{76}$$Ge. The Gerda Phase I energy calibration data have been reprocessed and an average improvement of 0.3 keV in energy resolution (FWHM) corresponding to 10% at the $Q$ value for $$0\

The New Digital Shoreline: How Web 2.0 and Millennials Are Revolutionizing Higher Education

ERIC Educational Resources Information Center

McHaney, Roger

2011-01-01

Two seismic forces beyond our control--the advent of Web 2.0 and the inexorable influx of tech-savvy Millennials on campus--are shaping what Roger McHaney calls "The New Digital Shoreline" of higher education. Failure to chart its contours, and adapt, poses a major threat to higher education as we know it. These forces demand that we as educators…

Digital Dividend Aware Business Models for the Creative Industries: Challenges and Opportunities in EU Markets

NASA Astrophysics Data System (ADS)

Cossiavelou, Vassiliki

EU counties have a historically unique opportunity to enable their creative industries to promote the knowledge societies, applying new business models to their media content and networks markets, that are digital dividend (DD) aware. This new extra-media gatekeeping factor could shape new alliances and co operations among the member states and the global media markets, as well.

Local and Total Density Measurements in Ice Shapes

NASA Technical Reports Server (NTRS)

Vargas, Mario; Broughton, Howard; Sims, James J.; Bleeze, Brian; Gaines, Vatanna

2005-01-01

Preliminary measurements of local and total densities inside ice shapes were obtained from ice shapes grown in the NASA Glenn Research Tunnel for a range of glaze ice, rime ice, and mixed phase ice conditions on a NACA 0012 airfoil at 0 angle of attack. The ice shapes were removed from the airfoil and a slice of ice 3 mm thick was obtained using a microtome. The resulting samples were then x-rayed to obtain a micro-radiography, the film was digitized, and image processing techniques were used to extract the local and total density values.

Coherent ultra dense wavelength division multiplexing passive optical networks

NASA Astrophysics Data System (ADS)

Shahpari, Ali; Ferreira, Ricardo; Ribeiro, Vitor; Sousa, Artur; Ziaie, Somayeh; Tavares, Ana; Vujicic, Zoran; Guiomar, Fernando P.; Reis, Jacklyn D.; Pinto, Armando N.; Teixeira, António

2015-12-01

In this paper, we firstly review the progress in ultra-dense wavelength division multiplexing passive optical network (UDWDM-PON), by making use of the key attributes of this technology in the context of optical access and metro networks. Besides the inherit properties of coherent technology, we explore different modulation formats and pulse shaping. The performance is experimentally demonstrated through a 12 × 10 Gb/s bidirectional UDWDM-PON over hybrid 80 km standard single mode fiber (SSMF) and optical wireless link. High density, 6.25 GHz grid, Nyquist shaped 16-ary quadrature amplitude modulation (16QAM) and digital frequency shifting are some of the properties exploited together in the tests. Also, bidirectional transmission in fiber, relevant in the context, is analyzed in terms of nonlinear and back-reflection effects on receiver sensitivity. In addition, as a basis for the discussion on market readiness, we experimentally demonstrate real-time detection of a Nyquist-shaped quaternary phase-shift keying (QPSK) signal using simple 8-bit digital signal processing (DSP) on a field-programmable gate array (FPGA).

Adaptive array antenna for satellite cellular and direct broadcast communications

NASA Technical Reports Server (NTRS)

Horton, Charles R.; Abend, Kenneth

1993-01-01

Adaptive phased-array antennas provide cost-effective implementation of large, light weight apertures with high directivity and precise beamshape control. Adaptive self-calibration allows for relaxation of all mechanical tolerances across the aperture and electrical component tolerances, providing high performance with a low-cost, lightweight array, even in the presence of large physical distortions. Beam-shape is programmable and adaptable to changes in technical and operational requirements. Adaptive digital beam-forming eliminates uplink contention by allowing a single electronically steerable antenna to service a large number of receivers with beams which adaptively focus on one source while eliminating interference from others. A large, adaptively calibrated and fully programmable aperture can also provide precise beam shape control for power-efficient direct broadcast from space. Advanced adaptive digital beamforming technologies are described for: (1) electronic compensation of aperture distortion, (2) multiple receiver adaptive space-time processing, and (3) downlink beam-shape control. Cost considerations for space-based array applications are also discussed.

Fully reconfigurable photonic microwave transversal filter based on digital micromirror device and continuous-wave, incoherent supercontinuum source.

PubMed

Lee, Ju Han; Chang, You Min; Han, Young-Geun; Lee, Sang Bae; Chung, Hae Yang

2007-08-01

The combined use of a programmable, digital micromirror device (DMD) and an ultrabroadband, cw, incoherent supercontinuum (SC) source is experimentally demonstrated to fully explore various aspects on the reconfiguration of a microwave filter transfer function by creating a range of multiwavelength optical filter shapes. Owing to both the unique characteristic of the DMD that an arbitrary optical filter shape can be readily produced and the ultrabroad bandwidth of the cw SC source that is 3 times larger than that of Er-amplified spontaneous emission, a multiwavelength optical beam pattern can be generated with a large number of wavelength filter taps apodized by an arbitrary amplitude window. Therefore various types of high-quality microwave filter can be readily achieved through the spectrum slicing-based photonic microwave transversal filter scheme. The experimental demonstration is performed in three aspects: the tuning of a filter resonance bandwidth at a fixed resonance frequency, filter resonance frequency tuning at a fixed resonance frequency, and flexible microwave filter shape reconstruction.

Improved pulse shape discrimination in EJ-301 liquid scintillators

NASA Astrophysics Data System (ADS)

Lang, R. F.; Masson, D.; Pienaar, J.; Röttger, S.

2017-06-01

Digital pulse shape discrimination has become readily available to distinguish nuclear recoil and electronic recoil events in scintillation detectors. We evaluate digital implementations of pulse shape discrimination algorithms discussed in the literature, namely the Charge Comparison Method, Pulse-Gradient Analysis, Fourier Series and Standard Event Fitting. In addition, we present a novel algorithm based on a Laplace Transform. Instead of comparing the performance of these algorithms based on a single Figure of Merit, we evaluate them as a function of recoil energy. Specifically, using commercial EJ-301 liquid scintillators, we examined both the resulting acceptance of nuclear recoils at a given rejection level of electronic recoils, as well as the purity of the selected nuclear recoil event samples. We find that both a Standard Event fit and a Laplace Transform can be used to significantly improve the discrimination capabilities over the whole considered energy range of 0 - 800keVee . Furthermore, we show that the Charge Comparison Method performs poorly in accurately identifying nuclear recoils.

Single-shot color fringe projection for three-dimensional shape measurement of objects with discontinuities.

PubMed

Dai, Meiling; Yang, Fujun; He, Xiaoyuan

2012-04-20

A simple but effective fringe projection profilometry is proposed to measure 3D shape by using one snapshot color sinusoidal fringe pattern. One color fringe pattern encoded with a sinusoidal fringe (as red component) and one uniform intensity pattern (as blue component) is projected by a digital video projector, and the deformed fringe pattern is recorded by a color CCD camera. The captured color fringe pattern is separated into its RGB components and division operation is applied to red and blue channels to reduce the variable reflection intensity. Shape information of the tested object is decoded by applying an arcsine algorithm on the normalized fringe pattern with subpixel resolution. In the case of fringe discontinuities caused by height steps, or spatially isolated surfaces, the separated blue component is binarized and used for correcting the phase demodulation. A simple and robust method is also introduced to compensate for nonlinear intensity response of the digital video projector. The experimental results demonstrate the validity of the proposed method.

High frequency mode shapes characterisation using Digital Image Correlation and phase-based motion magnification

NASA Astrophysics Data System (ADS)

Molina-Viedma, A. J.; Felipe-Sesé, L.; López-Alba, E.; Díaz, F.

2018-03-01

High speed video cameras provide valuable information in dynamic events. Mechanical characterisation has been improved by the interpretation of the behaviour in slow-motion visualisations. In modal analysis, videos contribute to the evaluation of mode shapes but, generally, the motion is too subtle to be interpreted. In latest years, image treatment algorithms have been developed to generate a magnified version of the motion that could be interpreted by naked eye. Nevertheless, optical techniques such as Digital Image Correlation (DIC) are able to provide quantitative information of the motion with higher sensitivity than naked eye. For vibration analysis, mode shapes characterisation is one of the most interesting DIC performances. Full-field measurements provide higher spatial density than classical instrumentations or Scanning Laser Doppler Vibrometry. However, the accurateness of DIC is reduced at high frequencies as a consequence of the low displacements and hence it is habitually employed in low frequency spectra. In the current work, the combination of DIC and motion magnification is explored in order to provide numerical information in magnified videos and perform DIC mode shapes characterisation at unprecedented high frequencies through increasing the amplitude of displacements.

A Sub-Sampling Approach for Data Acquisition in Gamma Ray Emission Tomography

NASA Astrophysics Data System (ADS)

Fysikopoulos, Eleftherios; Kopsinis, Yannis; Georgiou, Maria; Loudos, George

2016-06-01

State of the art data acquisition systems for small animal imaging gamma ray detectors often rely on free running Analog to Digital Converters (ADCs) and high density Field Programmable Gate Arrays (FPGA) devices for digital signal processing. In this work, a sub-sampling acquisition approach, which exploits a priori information regarding the shape of the obtained detector pulses is proposed. Output pulses shape depends on the response of the scintillation crystal, photodetector's properties and amplifier/shaper operation. Using these known characteristics of the detector pulses prior to digitization, one can model the voltage pulse derived from the shaper (a low-pass filter, last in the front-end electronics chain), in order to reduce the desirable sampling rate of ADCs. Fitting with a small number of measurements, pulse shape estimation is then feasible. In particular, the proposed sub-sampling acquisition approach relies on a bi-exponential modeling of the pulse shape. We show that the properties of the pulse that are relevant for Single Photon Emission Computed Tomography (SPECT) event detection (i.e., position and energy) can be calculated by collecting just a small fraction of the number of samples usually collected in data acquisition systems used so far. Compared to the standard digitization process, the proposed sub-sampling approach allows the use of free running ADCs with sampling rate reduced by a factor of 5. Two small detectors consisting of Cerium doped Gadolinium Aluminum Gallium Garnet (Gd3Al2Ga3O12 : Ce or GAGG:Ce) pixelated arrays (array elements: 2 × 2 × 5 mm3 and 1 × 1 × 10 mm3 respectively) coupled to a Position Sensitive Photomultiplier Tube (PSPMT) were used for experimental evaluation. The two detectors were used to obtain raw images and energy histograms under 140 keV and 661.7 keV irradiation respectively. The sub-sampling acquisition technique (10 MHz sampling rate) was compared with a standard acquisition method (52 MHz sampling rate), in terms of energy resolution and image signal to noise ratio for both gamma ray energies. The Levenberg-Marquardt (LM) non-linear least-squares algorithm was used, in post processing, in order to fit the acquired data with the proposed model. The results showed that analog pulses prior to digitization are being estimated with high accuracy after fitting with the bi-exponential model.

Alpha-gamma pulse-shape discrimination in Gd3Al2Ga3O12 (GAGG):Ce3+ crystal scintillator using shape indicator

NASA Astrophysics Data System (ADS)

Tamagawa, Yoichi; Inukai, Yuji; Ogawa, Izumi; Kobayashi, Masaaki

2015-09-01

The pulse-shape discrimination (PSD) in a GAGG single-crystal scintillator was studied by using a shape indicator (SI) parameter of the optimal digital filter method. SI is one of the most useful PSD methods that use typical pulse shapes. Excellent discrimination between 0.662 MeV γ-rays and 5.48 MeV α-rays was achieved. For a cut at SI=0.0056, 99.95% of the γ-rays and only 0.22% of the α-rays were retained. Selection of background events (γ and α) in the GAGG scintillator was achieved by using the PSD method.

In vivo precision of conventional and digital methods for obtaining quadrant dental impressions.

PubMed

Ender, Andreas; Zimmermann, Moritz; Attin, Thomas; Mehl, Albert

2016-09-01

Quadrant impressions are commonly used as alternative to full-arch impressions. Digital impression systems provide the ability to take these impressions very quickly; however, few studies have investigated the accuracy of the technique in vivo. The aim of this study is to assess the precision of digital quadrant impressions in vivo in comparison to conventional impression techniques. Impressions were obtained via two conventional (metal full-arch tray, CI, and triple tray, T-Tray) and seven digital impression systems (Lava True Definition Scanner, T-Def; Lava Chairside Oral Scanner, COS; Cadent iTero, ITE; 3Shape Trios, TRI; 3Shape Trios Color, TRC; CEREC Bluecam, Software 4.0, BC4.0; CEREC Bluecam, Software 4.2, BC4.2; and CEREC Omnicam, OC). Impressions were taken three times for each of five subjects (n = 15). The impressions were then superimposed within the test groups. Differences from model surfaces were measured using a normal surface distance method. Precision was calculated using the Perc90_10 value. The values for all test groups were statistically compared. The precision ranged from 18.8 (CI) to 58.5 μm (T-Tray), with the highest precision in the CI, T-Def, BC4.0, TRC, and TRI groups. The deviation pattern varied distinctly depending on the impression method. Impression systems with single-shot capture exhibited greater deviations at the tooth surface whereas high-frame rate impression systems differed more in gingival areas. Triple tray impressions displayed higher local deviation at the occlusal contact areas of upper and lower jaw. Digital quadrant impression methods achieve a level of precision, comparable to conventional impression techniques. However, there are significant differences in terms of absolute values and deviation pattern. With all tested digital impression systems, time efficient capturing of quadrant impressions is possible. The clinical precision of digital quadrant impression models is sufficient to cover a broad variety of restorative indications. Yet the precision differs significantly between the digital impression systems.

A tunable digital ishihara plate for pre-school aged children.

PubMed

Gambino, Orazio; Minafo, Ester; Pirrone, Roberto; Ardizzone, Edoardo

2016-08-01

Colors play a fundamental role for children, both in the everyday life and in education. They recognize the surrounding world, and play games making a large use of colors. They learn letters and numbers by means of colors. As a consequence, early diagnosis of color blindness is an crucial to support an individual affected by this visual perception alteration at the initial phase of his/her life. The diagnosis of red-green color deficiencies (protanopia or deuteranopia) is commonly accomplished by means of the Ishihara test, which consists of plates showing dots with different sizes where some of them compose numbers within a gamut of colors while the ones composing the background have different colors. In this paper, a web application written in javascript is presented, that implements a digital Ishihara-like test for pre-school aged children. Instead numbers or letters, It can transform any binary image representing animal shapes, or any other child-friendly shape, into an Ishihara-like image. This digital plate is not static. The operator can increment the dot density to improve the quality of the shape contour and the entire plate can be redrawn with different dot sizes/colors chosen randomly according to the color pattern of the test. Separate controls for brightness and saturation are implemented to calibrate the chromatic aspect of the background and foreground dots.

Spectrally resolved digital holography using a white light LED

NASA Astrophysics Data System (ADS)

Claus, D.; Pedrini, G.; Buchta, D.; Osten, W.

2017-06-01

This paper introduces the concept of spectrally resolved digital holography. The measurement principle and the analysis of the data will be discussed in detail. The usefulness of spectrally resolved digital holography is demonstrated for colour imaging and optical metrology with regards to the recovery of modulus information and phase information, respectively. The phase information will be used to measure the shape of an object via the application of the dual wavelength method. Based on the large degree of data available, multiple speckle de-correlated dual wavelength phase maps can be obtained, which when averaged result in a signal to noise ratio improvement.

In-Orbit Performance of the Digital Electronics for the X-Ray Microcalorimeter Onboard the Hitomi Satellite

NASA Astrophysics Data System (ADS)

Tsujimoto, M.; Tashiro, M. S.; Ishisaki, Y.; Yamada, S.; Seta, H.; Mitsuda, K.; Boyce, K. R.; Eckart, M. E.; Kilbourne, C. A.; Leutenegger, M. A.; Porter, F. S.; Kelley, R. L.

2018-03-01

The pulse shape processor is the onboard digital electronics unit of the X-ray microcalorimeter instrument—the soft X-ray spectrometer—onboard the Hitomi satellite. It processes X-ray events using the optimum filtering with limited resources. It was operated for 36 days in orbit continuously without issues and met the requirement of processing a 150 s^{-1} event rate during the observation of bright sources. Here, we present the results obtained in orbit, focusing on its performance as the onboard digital signal processing unit of an X-ray microcalorimeter.

Methods in Astronomical Image Processing

NASA Astrophysics Data System (ADS)

Jörsäter, S.

A Brief Introductory Note History of Astronomical Imaging Astronomical Image Data Images in Various Formats Digitized Image Data Digital Image Data Philosophy of Astronomical Image Processing Properties of Digital Astronomical Images Human Image Processing Astronomical vs. Computer Science Image Processing Basic Tools of Astronomical Image Processing Display Applications Calibration of Intensity Scales Calibration of Length Scales Image Re-shaping Feature Enhancement Noise Suppression Noise and Error Analysis Image Processing Packages: Design of AIPS and MIDAS AIPS MIDAS Reduction of CCD Data Bias Subtraction Clipping Preflash Subtraction Dark Subtraction Flat Fielding Sky Subtraction Extinction Correction Deconvolution Methods Rebinning/Combining Summary and Prospects for the Future

The Double Edged Sword: A Brief Comparison of IT and Internet Development in Malaysia and Some Few Neighboring Countries in the Context of Digital Divide.

ERIC Educational Resources Information Center

Samad, Ramli Abdul

This paper shows that, although a digital divide exists between developed and developing countries, the development of information technology (IT) and the Internet has had a profound political, social, and economic impact on developing countries. IT and the Internet revolution are shaping the world into new polarized entities due to the uneven…

Digital Holographic Interferometry and Speckle Correlation

NASA Astrophysics Data System (ADS)

Yamaguchi, Ichirou

2010-04-01

Relations and combinations between holographic interferometry and speckle correlation in contouring by phase-shifting digital holography are discussed. Three-dimensional distributions of correlations of the complex amplitudes and intensities before and after the laser wavelength shift are calculated in numerical simulations where a rough surface is modeled with random numbers. Fringe localization related to speckle displacement as well as speckle suppression in phase analysis are demonstrated for general surface shape and recording conditions.

Gross morphology and ultrastructure of salivary glands of the mute cicada Karenia caelatata Distant (Hemiptera: Cicadoidea).

PubMed

Zhong, Hai-ying; Wei, Cong; Zhang, Ya-lin

2013-02-01

Salivary glands of the cicada Karenia caelatata Distant were investigated using light microscopy and transmission electron microscopy. The salivary glands are paired structures and consist of principal glands and accessory glands. The principal gland is subdivided into anterior lobe and posterior lobe; the former contains about 34-39 long digitate lobules, while the latter contains approximately 30-33 long digitate lobules and 13-22 short digitate lobules. These short digitate lobules, about one fifth or sixth as long as the long digitate lobules, locate at the base of the long digitate lobules of posterior lobe. All of these digitate lobules vary in size, disposition, length and shape. The anterior lobe and the posterior lobe are connected by an anterior-posterior duct. Two efferent salivary ducts, which connect with the posterior lobe, fuse to form a common duct. The accessory gland is composed of three parts: a greatly tortuous and folded accessory salivary tube, a circlet of gular gland constituting of several acini of the same size, and a non-collapsible accessory salivary duct. The digitate lobules and gular glands possess secretory cells containing abundant secretory granules vary in size, shape, and electron density, as might indicate different materials are synthesized in different secretory regions. The anterior-posterior duct lines with a player of cuticular lining, and cells beneath the cuticular lining lack of basal infoldings, as suggests the duct serves just to transport secretions. The accessory salivary duct is lined with cuticular lining; cells of the duct have well developed basal infoldings associated with abundant mitochondria, as probably suggests the duct is a reabsorptive region of ions. The cells of the accessory salivary tube possess deep basal infoldings and well developed apical dense microvilli, indicating the cells of the tube are secretory in function. Concentric lamellar structures and a peculiar structure with abundant membrane-bound vesicles and secretory granules are observed for the first time, but their derivation and function remain unclear. The morphology and ultrastructure differences observed in the principal glands and accessory gland of the salivary glands of K. caelatata indicate that the sheath saliva was secreted by the principal glands, and the watery saliva was secreted by the accessory salivary glands. Rod-shaped microorganisms are found in the salivary glands (i.e., accessory salivary duct, gular gland, and long digitate lobule of salivary glands) for the first time, and their identity, function, and relationship to microorganisms residing in the salivary glands and/or other parts of alimentary canal of other cicadas need to be investigated further. Copyright © 2012 Elsevier Ltd. All rights reserved.

Improved grid-noise removal in single-frame digital moiré 3D shape measurement

NASA Astrophysics Data System (ADS)

Mohammadi, Fatemeh; Kofman, Jonathan

2016-11-01

A single-frame grid-noise removal technique was developed for application in single-frame digital-moiré 3D shape measurement. The ability of the stationary wavelet transform (SWT) to prevent oscillation artifacts near discontinuities, and the ability of the Fourier transform (FFT) applied to wavelet coefficients to separate grid-noise from useful image information, were combined in a new technique, SWT-FFT, to remove grid-noise from moiré-pattern images generated by digital moiré. In comparison to previous grid-noise removal techniques in moiré, SWT-FFT avoids the requirement for mechanical translation of optical components and capture of multiple frames, to enable single-frame moiré-based measurement. Experiments using FFT, Discrete Wavelet Transform (DWT), DWT-FFT, and SWT-FFT were performed on moiré-pattern images containing grid noise, generated by digital moiré, for several test objects. SWT-FFT had the best performance in removing high-frequency grid-noise, both straight and curved lines, minimizing artifacts, and preserving the moiré pattern without blurring and degradation. SWT-FFT also had the lowest noise amplitude in the reconstructed height and lowest roughness index for all test objects, indicating best grid-noise removal in comparison to the other techniques.

A Stone or a Sculpture? It Is All in Your Perception

ERIC Educational Resources Information Center

Naresh, Nirmala

2015-01-01

Workplace mathematics, a subgroup of research on everyday mathematics and ethnomathematics documents the mathematical activities of both adults and children outside school settings. In this paper, I document the mental mathematical activities of a group of bus conductors in Chennai, India. I draw into the research areas of mental computation and…

Cultural Symbolism behind the Architectural Design of Mounds Park All-Nations Magnet School.

ERIC Educational Resources Information Center

Pewewardy, Cornell; May, Paul G.

1992-01-01

The architectural design of Mounds Park All-Nations Magnet School (St. Paul, Minnesota) incorporates cultural symbols representing the Native American worldview and Medicine Wheel Circle beliefs, as well as design elements from aboriginal housing styles, and colors and sculptured elements that reinforce the relationship of nature to building. (SV)

Reflections on the Evolving Triad Tutorial in a Postgraduate Art Studio

ERIC Educational Resources Information Center

Tripp, Sarah

2016-01-01

This article traces the evolution of the "triad tutorial". The triad model, predominantly used in the training of counsellors and psychotherapists, was originally combined with the art school tutorial model in the context of the Edinburgh Sculpture Workshop to enhance critical discourse between studio holders. The resulting hybrid, the…