High Resolution Quaternary Seismic Stratigraphy of the New York Bight Continental Shelf

USGS Publications Warehouse

Schwab, William C.; Denny, J.F.; Foster, D.S.; Lotto, L.L.; Allison, M.A.; Uchupi, E.; Swift, B.A.; Danforth, W.W.; Thieler, E.R.; Butman, Bradford

2003-01-01

A principal focus for the U.S. Geological Survey (USGS) Coastal and Marine Geology Program (marine.usgs.gov) is regional reconnaissance mapping of inner-continental shelf areas, with initial emphasis on heavily used areas of the sea floor near major population centers. The objectives are to develop a detailed regional synthesis of the sea-floor geology in order to provide information for a wide range of management decisions and to form a basis for further investigations of marine geological processes. In 1995, the USGS, in cooperation with the U.S. Army Corps of Engineers (USACOE), New York District, began to generate reconnaissance maps of the continental shelf seaward of the New York - New Jersey metropolitan area. This mapping encompassed the New York Bight inner-continental shelf, one of the most heavily trafficked and exploited coastal regions in the United States. Contiguous areas of the Hudson Shelf Valley, the largest physiographic feature on this segment of the continental shelf, also were mapped as part of a USGS study of contaminated sediments (Buchholtz ten Brink and others, 1994; 1996). The goal of the reconnaissance mapping was to provide a regional synthesis of the sea-floor geology in the New York Bight area, including: (a) a description of sea-floor morphology; (b) a map of sea-floor sedimentary lithotypes; (c) the geometry and structure of the Cretaceous strata and Quaternary deposits; and (d) the geologic history of the region. Pursuing the course of this mapping effort, we obtained sidescan-sonar images of 100 % of the sea floor in the study area. Initial interpretations of these sidescan data were presented by Schwab and others, (1997a, 1997b, 2000a). High-resolution seismic-reflection profiles collected along each sidescan-sonar line used multiple acoustic sources (e.g., watergun, CHIRP, Geopulse). Multibeam swath-bathymetry data also were obtained for a portion of the study area (Butman and others, 1998;). In this report, we present a series of structural and sediment isopach maps and interpretations of the Quaternary evolution of the inner-continental shelf off the New York - New Jersey metropolitan area based on subbottom, sidescan-sonar, and multibeam-bathymetric data.

The Sea-Floor Mapping Facility at the U.S. Geological Survey Woods Hole Field Center, Woods Hole, Massachusetts

USGS Publications Warehouse

Deusser, Rebecca E.; Schwab, William C.; Denny, Jane F.

2002-01-01

Researchers of the sea-floor mapping facility at the U.S. Geological Survey (USGS) Woods Hole Field Center in Woods Hole, Mass., use state-of-the-art technology to produce accurate geologic maps of the sea floor. In addition to basic bathymetry and morphology, sea-floor maps may contain information about the distribution of sand resources, patterns of coastal erosion, pathways of pollutant transport, and geologic controls on marine biological habitats. The maps may also show areas of human impacts, such as disturbance by bottom fishing and pollution caused by offshore waste disposal. The maps provide a framework for scientific research and provide critical information to decisionmakers who oversee resources in the coastal ocean.

Mapping the Gulf of Maine with side-scan sonar: A new bottom-type classification for complex seafloors

USGS Publications Warehouse

Barnhardt, W.A.; Kelley, J.T.; Dickson, S.M.; Belknap, D.F.

1998-01-01

The bedrock-framed seafloor in the northwestern Gulf of Maine is characterized by extreme changes in bathymetric relief and covered with a wide variety of surficial materials. Traditional methods of mapping cannot accurately represent the great heterogeneity of such a glaciated region. A new mapping scheme for complex seafloors, based primarily on the interpretation of side-scan sonar imagery, utilizes four easily recognized units: rock, gravel, sand and mud. In many places, however, the seafloor exhibits a complicated mixture or extremely 'patchy' distribution of the four basic units, which are too small to map individually. Twelve composite units, each a two-component mixture of the basic units, were established to represent this patchiness at a small scale (1:100,000). Using a geographic information system, these and all other available data (seismic profiles, grab samples, submersible dives and cores) were referenced to a common geographic base, superimposed on bathymetric contours and then integrated into surficial geologic maps of the regional inner continental shelf. This digital representation of the seafloor comprises a multidimensional, interactive model complete with explicit attributes (depth, bottom type) that allow for detailed analysis of marine environments.

California State Waters Map Series: offshore of Santa Barbara, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Golden, Nadine E.; Phillips, Eleyne L.; Ritchie, Andrew C.; Greene, H. Gary; Krigsman, Lisa M.; Kvitek, Rikk G.; Dieter, Bryan E.; Endris, Charles A.; Seitz, Gordon G.; Sliter, Ray W.; Erdey, Mercedes D.; Gutierrez, Carlos I.; Wong, Florence L.; Yoklavich, Mary M.; Draut, Amy E.; Hart, Patrick E.; Conrad, James E.; Cochran, Susan A.; Johnson, Samuel Y.; Cochran, Susan A.

2013-01-01

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Santa Barbara map area lies within the central Santa Barbara Channel region of the Southern California Bight. This geologically complex region forms a major biogeographic transition zone, separating the cold-temperate Oregonian province north of Point Conception from the warm-temperate California province to the south. The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and geodetic studies indicate that the region is presently undergoing north-south shortening. Uplift rates (as much as 2.2 mm/yr) that are based on studies of onland marine terraces provide further evidence of significant shortening. The city of Santa Barbara, the main coastal population center in the map area, is part of a contiguous urban area that extends from Carpinteria to Goleta. This urban area was developed on the coalescing alluvial surfaces, uplifted marine terraces, and low hills that lie south of the east-west-trending Santa Ynez Mountains. Several beaches line the actively utilized Santa Barbara coastal zone, including Arroyo Burro Beach Park, Leadbetter Beach, East Beach, and “Butterfly Beach.” There are ongoing coastal erosion problems associated with both development and natural processes; between 1933–1934 and 1998, cliff erosion in the map area occurred at rates of about 0.1 to 1 m/yr, the largest amount (63 m) occurring at Arroyo Burro in the western part of the map area. In addition, development of the Santa Barbara Harbor, which began in 1928, lead to shoaling west of the harbor as the initial breakwater trapped sand, as well as to coastal erosion east of the harbor. Since 1959, annual harbor dredging has mitigated at least some of the downcoast erosion problems. The Offshore of Santa Barbara map area lies in the central part of the Santa Barbara littoral cell, which is characterized by littoral drift to the east-southeast. Drift rates have been estimated to be about 400,000 tons/yr at Santa Barbara Harbor. Sediment supply to the western and central parts of the littoral cell, including the map area, is largely from relatively small transverse coastal watersheds. Within the map area, these coastal watersheds include (from east to west) San Ysidro Creek, Oak Creek, Montecito Creek, Sycamore Creek, Mission Creek, Arroyo Burro, and Atascadero Creek. The Ventura and Santa Clara Rivers, the mouths of which are about 40 to 50 km southeast of Santa Barbara, are much larger sediment sources. Still farther east, eastward-moving sediment in the littoral cell is trapped by Hueneme and Mugu Canyons and then transported to the deep-water Santa Monica Basin. The offshore part of the map area consists of a relatively flat and shallow continental shelf, which dips gently seaward (about 0.4° to 0.8°) so that water depths at the 3-nautical-mile limit of California’s State Waters are about 45 m in the east and about 75 m in the west. This part of the Santa Barbara Channel is relatively well protected from large Pacific swells from the north and northwest by Point Conception and from the south and southwest by offshore islands and banks. The shelf is underlain by variable amounts of upper Quaternary shelf, estuarine, and fluvial sediments deposited as sea level fluctuated in the late Pleistocene. Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft sediment and isolated areas of rocky habitat that support kelp-forest communities nearshore and rocky-reef communities in deep water. The potential marine benthic habitat types mapped in the Offshore of Santa Barbara map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats, which lie within the Shelf (continental shelf) megahabitat, range from soft, unconsolidated sediment to hard sedimentary bedrock. This heterogeneous seafloor provides promising habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms.

A 1.4-Billion Pixel Map of the Seafloor: BOEM's Mission to Visualize Dynamic Geology and Identify Natural Seep Sites in the Gulf of Mexico

NASA Astrophysics Data System (ADS)

Kramer, K.; Shedd, W. W.

2017-12-01

In May, 2017, the U.S. Department of the Interior's Bureau of Ocean Energy Management (BOEM) published a high-resolution seafloor map of the northern Gulf of Mexico region. The new map, derived from 3-D seismic surveys, provides the scientific community with enhanced resolution and reveals previously undiscovered and poorly resolved geologic features of the continental slope, salt minibasin province, abyssal plain, Mississippi Fan, and the Florida Shelf and Escarpment. It becomes an even more powerful scientific tool when paired with BOEM's public database of 35,000 seafloor features, identifying natural hydrocarbon seeps, hard grounds, mud volcanoes, sediment flows, pockmarks, slumps, and many others. BOEM has mapped the Gulf of Mexico seafloor since 1998 in a regulatory mission to identify natural oil and gas seeps and protect the coral and chemosynthetic communities growing at those sites. The nineteen-year mapping effort, still ongoing, resulted in the creation of the 1.4-billion pixel map and the seafloor features database. With these tools and continual collaboration with academia, professional scientific institutions, and the offshore energy industry, BOEM will continue to incorporate new data to update and expand these two resources on a regular basis. They can be downloaded for free from BOEM's website at https://www.boem.gov/Gulf-of-Mexico-Deepwater-Bathymetry/ and https://www.boem.gov/Seismic-Water-Bottom-Anomalies-Map-Gallery/.

Industry Contributions to Seafloor Mapping: Building Partnerships for Collecting, Sharing, and Compiling Data

NASA Astrophysics Data System (ADS)

Brumley, K. J.; Mitchell, G. A.; Millar, D.; Saade, E. J.; Gharib, J. J.

2017-12-01

In an effort to map the remaining 85% of the worlds seafloor, The Nippon Foundation and GEBCO have launched Seabed 2030 to provide high-resolution bathymetry for all ocean waters by the year 2030. This ambitious effort will require sharing of bathymetric information to build a global baseline bathymetry database. Multibeam echosounder (MBES) data is a promising source of data for Seabed 2030. These data benefit multiple users which includes not only bathymetric information, but also valuable backscatter data, useful for determining seafloor characteristics), as well as water column data, which can be used to explore other aspects of the marine environment and potentially help constrain some of the ocean's methane flux estimates. Fugro provides global survey services for clients in the oil and gas, telecommunications, infrastructure industries, and state and federal agencies. With a global fleet of survey vessels and autonomous vehicles equipped with state-of-the-art MBES systems, Fugro has performed some of the world's largest offshore surveys over the past several years mapping close to 1,000,000 km2 of seafloor per year with high-resolution MBES data using multi-vessel operational models and new methods for merging datasets from different multibeam sonar systems. Although most of these data are proprietary, Fugro is working with clients in the private-sector to make data available to the Seabed 2030 project at a decimated resolution of 100 m. The company is also contributing the MBES data acquired during transits to survey locations. Fugro has also partnered with Shell Ocean Discovery XPRIZE to support development of new rapid, unmanned, high-resolution ocean mapping technologies that can benefit understanding of the world's oceans. Collaborative approaches such as these are helping to establish a new standard for other industry contributions, and to facilitate a new outlook for data sharing among the public and private sectors. Recognizing the importance of an open-sourced global bathymetric dataset, we will discuss our initial efforts to contribute to the Seabed 2030 program from an industry perspective, share new techniques in survey operations for surveying large areas of the seafloor, and show geologic discoveries from various recent very large-scale MBES surveys.

Repeat mapping surveys capture changes in seafloor morphology after a well-documented sediment gravity flow event in Monterey Canyon

NASA Astrophysics Data System (ADS)

Lundsten, E. M.; Caress, D. W.; Thomas, H. J.; Anderson, K.; Paull, C. K.; Maier, K. L.; Gwiazda, R.

2016-12-01

Monitoring the passage of sediment gravity flows as they move through the axis of a submarine canyon, and documenting turbidite deposits as well as the associated changes in seafloor morphology are goals of an on-going multi-institution effort called the Coordinated Canyon Experiment (CCE). The CCE consists of an array of moorings and sensors deployed on the Monterey Canyon floor, offshore California, to monitor the passage of sediment-laden flows. In addition, as part of the CCE, detailed multibeam bathymetric surveys of the floor of Monterey Canyon were repeatedly conducted with a mapping AUV (Autonomous Underwater Vehicle) at two sites. The AUV carried a high-resolution multibeam echosounder head (vertical precision of 0.15 m and horizontal resolution of 1.0 m). An inertial navigation system combined with a Doppler Velocity Logger allowed the AUV to fly pre-programmed grids at 3 knots while maintaining an altitude of 50 m above the seafloor to obtain a nominal line spacing of 130 m. The shallower site covered the axial channel between 250 and 550 m water depth and the deeper site between 1300 and 1850 m water depth. Recurring crescent-shaped bedforms, the origin of which is a topic of considerable debate, are present in both areas. Both areas were surveyed five times between October 2015 and March 2016. A particularly large gravity flow passed along more than 50 km of Monterey Canyon on January 15, 2016 and was sufficiently energetic to displace 9 of 13 moorings. One large instrument frame weighing 800 kgs moved 4.5 km down canyon and a mooring anchored with a railroad wheel moved 7.8 km down canyon. AUV mapping efforts successfully captured the seafloor morphology in detail before and after this large event. This poster is intended to show the effect of this event on the seafloor morphology and how features such as crescent-shape bedforms change in response to an event of known magnitude and duration.

California State Waters Map Series: offshore of Carpinteria, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Golden, Nadine E.; Phillips, Eleyne L.; Ritchie, Andrew C.; Kvitek, Rikk G.; Greene, H. Gary; Endris, Charles A.; Seitz, Gordon G.; Sliter, Ray W.; Erdey, Mercedes D.; Wong, Florence L.; Gutierrez, Carlos I.; Krigsman, Lisa M.; Draut, Amy E.; Hart, Patrick E.; Johnson, Samuel Y.; Cochran, Susan A.

2013-01-01

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Carpinteria map area lies within the central Santa Barbara Channel region of the Southern California Bight. This geologically complex region forms a major biogeographic transition zone, separating the cold-temperate Oregonian province north of Point Conception from the warm-temperate California province to the south. The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and the region is presently undergoing north-south shortening. The small city of Carpinteria is the most significant onshore cultural center in the map area; the smaller town of Summerland lies west of Carpinteria. These communities rest on a relatively flat coastal piedmont that is surrounded on the north, east, and west by hilly relief on the flanks of the Santa Ynez Mountains. El Estero, a salt marsh on the coast west of Carpinteria, is an ecologically important coastal estuary. Southeast of Carpinteria, the coastal zone is narrow strip containing highway and railway transportation corridors and a few small residential clusters. Rincon Point is a well-known world-class surf break, and Rincon Island, constructed for oil and gas production, lies offshore of Punta Gorda. The steep bluffs backing the coastal strip are geologically unstable, and coastal erosion problems are ongoing in the map area; most notably, landslides in 2005 struck the small coastal community of La Conchita, engulfing houses and killing ten people. The Offshore of Carpinteria map area lies in the central part of the Santa Barbara littoral cell, whose littoral drift is to the east-southeast. Drift rates have been estimated to be about 400,000 tons/yr at Santa Barbara Harbor (about 15 km west of Carpinteria). At the east end of the littoral cell, eastward-moving sediment is trapped by Hueneme and Mugu Canyons and then transported to the deep-water Santa Monica Basin. Sediment supply to the western and central part of the littoral cell is largely from relatively small transverse coastal watersheds, which have an estimated cumulative annual sediment flux of 640,000 tons/yr. The much larger Ventura and Santa Clara Rivers, the mouths of which are about 25 to 30 km southeast of Carpinteria, yield an estimated 3.4 million tons of sediment annually, the coarser sediment load generally moving southeast, down the coast, and the finer sediment load moving both upcoast and offshore. The offshore part of the map area consists of a relatively flat and shallow continental shelf, which dips so gently (about 0.4° to 0.5°) that water depths at the 3-nautical-mile limit of California’s State Waters are 40 to 45 m. This part of the Santa Barbara Channel is relatively well protected from large Pacific swells from the north and northwest by Point Conception and from the south and southwest by offshore islands and banks. Fair-weather wave base is typically shallower than 20-m water depth, but winter storms are capable of resuspending fine-grained sediments in 30 m of water, and so shelf sediments in the map area probably are remobilized on an annual basis. The shelf is underlain by variable amounts of upper Quaternary shelf, estuarine, and fluvial sediments that thicken to the south. Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft sediment and isolated areas of rocky habitat that support kelp-forest communities nearshore and rocky-reef communities in deep water. The potential marine benthic habitat types mapped in the Offshore of Carpinteria map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie within the Shelf (continental shelf) megahabitat, dominated by a flat seafloor and substrates formed from deposition of fluvial and marine sediment during sea-level rise. This fairly homogeneous seafloor provides promising habitat for groundfish, crabs, shrimp, and other marine benthic organisms. The only significant interruptions to this homogeneous habitat type are the exposures of hard, irregular, and hummocky sedimentary bedrock and coarse-grained sediment where potential habitats for rockfish and related species exist.

California State Waters Map Series--Offshore of Ventura, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Golden, Nadine E.; Phillips, Eleyne L.; Ritchie, Andrew C.; Kvitek, Rikk G.; Greene, H. Gary; Krigsman, Lisa M.; Endris, Charles A.; Seitz, Gordon G.; Gutierrez, Carlos I.; Sliter, Ray W.; Erdey, Mercedes D.; Wong, Florence L.; Yoklavich, Mary M.; Draut, Amy E.; Hart, Patrick E.; Johnson, Samuel Y.; Cochran, Susan A.

2013-01-01

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Ventura map area lies within the Santa Barbara Channel region of the Southern California Bight. This geologically complex region forms a major biogeographic transition zone, separating the cold-temperate Oregonian province north of Point Conception from the warm-temperate California province to the south. The map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges, and the region is presently undergoing north-south shortening. The city of Ventura is the major cultural center in the map area. The Ventura River cuts through Ventura, draining the Santa Ynez Mountains and the coastal hills north of Ventura. Northwest of Ventura, the coastal zone is a narrow strip containing highway and railway transportation corridors and a few small residential clusters. Rincon Island, an island constructed for oil and gas production, lies offshore of Punta Gorda. Southeast of Ventura, the coastal zone consists of the mouth and broad, alluvial plains of the Santa Clara River, and the region is characterized by urban and agricultural development. Ventura Harbor sits just north of the mouth of the Santa Clara River, in an area formerly occupied by lagoons and marshes. The Offshore of Ventura map area lies in the eastern part of the Santa Barbara littoral cell, whose littoral drift is to the east-southeast. Drift rates of about 700,000 to 1,150,000 tons/yr have been reported at Ventura Harbor. At the east end of the littoral cell, eastward-moving sediment is trapped by Hueneme and Mugu Canyons and then transported into the deep-water Santa Monica Basin. The largest sediment source to this littoral cell (and the largest in all of southern California) is the Santa Clara River, which has an estimated annual sediment flux of 3.1 million tons. In addition, the Ventura River yields about 270,000 tons of sediment annually. Despite the large local sediment supply, coastal erosion problems are ongoing in the map area. Riprap, revetments, and seawalls variably protect the coast within and north of Ventura. The offshore part of the map area mainly consists of relatively flat, shallow continental shelf, which dips so gently (about 0.2° to 0.4°) that water depths at the 3-nautical-mile limit of California’s State Waters are just 20 to 40 m. This part of the Santa Barbara Channel is relatively well protected from large Pacific swells from the north and west by Point Conception and the Channel Islands; long-period swells affecting the area are mainly from the south-southwest. Fair-weather wave base is typically shallower than 20-m water depth, but winter storms are capable of resuspending fine-grained sediments in 30 m of water, and so shelf sediments in the map area probably are remobilized on an annual basis. The shelf is underlain by tens of meters of interbedded upper Quaternary shelf, estuarine, and fluvial sediments deposited as sea level fluctuated up and down in the last several hundred thousand years. Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft sediment and isolated areas of rocky habitat that support kelp-forest communities nearshore and rocky-reef communities in deep water. The potential marine benthic habitat types mapped in the Offshore of Ventura map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie within the Shelf (continental shelf) megahabitat, dominated by a flat seafloor and substrates formed from deposition of fluvial and marine sediment during sea-level rise. This flat, fairly homogeneous seafloor, composed primarily of unconsolidated sand and mud and local deposits of gravel, cobbles, and pebbles, provides promising habitat for groundfish, crabs, shrimp, and other marine benthic organisms. The only significant interruptions to this homogeneous habitat type are exposures of hard, irregular sedimentary bedrock and coarse-grained sediment where potential habitats for rockfish and related species exist.

California State Waters Map Series: offshore of San Gregorio, California

USGS Publications Warehouse

Cochrane, Guy R.; Dartnell, Peter; Greene, H. Gary; Watt, Janet T.; Golden, Nadine E.; Endris, Charles A.; Phillips, Eleyne L.; Hartwell, Stephen R.; Johnson, Samuel Y.; Kvitek, Rikk G.; Erdey, Mercedes D.; Bretz, Carrie K.; Manson, Michael W.; Sliter, Ray W.; Ross, Stephanie L.; Dieter, Bryan E.; Chin, John L.; Cochran, Susan A.; Cochrane, Guy R.; Cochran, Susan A.

2014-01-01

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California's State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of San Gregorio map area is located in northern California, on the Pacific coast of the San Francisco Peninsula about 50 kilometers south of the Golden Gate. The map area lies offshore of the Santa Cruz Mountains, part of the northwest-trending Coast Ranges that run roughly parallel to the San Andreas Fault Zone. The Santa Cruz Mountains lie between the San Andreas Fault Zone and the San Gregorio Fault system. The nearest significant onshore cultural centers in the map area are San Gregorio and Pescadero, both unincorporated communities with populations well under 1,000. Both communities are situated inland of state beaches that share their names. No harbor facilities are within the Offshore of San Gregorio map area. The hilly coastal area is virtually undeveloped grazing land for sheep and cattle. The coastal geomorphology is controlled by late Pleistocene and Holocene slip in the San Gregorio Fault system. A westward bend in the San Andreas Fault Zone, southeast of the map area, coupled with right-lateral movement along the San Gregorio Fault system have caused regional folding and uplift. The coastal area consists of high coastal bluffs and vertical sea cliffs. Coastal promontories in the northern and southern parts of the map area are the result of right-lateral motion on strands of the San Gregorio Fault system. In the south, headlands near Pescadero Point have been uplifted by motion along the west strand of the San Gregorio Fault (also called the Frijoles Fault), which separates rocks of the Pigeon Point Formation south of the fault from rocks of the Purisima Formation north of the fault. The regional uplift in this map area has caused relatively shallow water depths within California's State Waters and, thus, little accommodation space for sediment accumulation. Sediment is observed offshore in the central part of the map area, in the shelter of the headlands north of the east strand of the San Gregorio Fault (also called the Coastways Fault) around Miramontes Point (about 5 km north of the map area) and also on the outer half of the California's State Waters shelf in the south where depths exceed 40 m. Sediment in the outer shelf of California's State Waters is rippled, indicating some mobility. The Offshore of San Gregorio map area lies within the cold-temperate biogeographic zone that is called either the "Oregonian province" or the "northern California ecoregion." This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, an eastern limb of the North Pacific subtropical gyre that flows from Oregon to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 350 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off of central California has experienced a warming over the last 50 years that is driving an ecosystem shift away from the productive subarctic regime towards a depopulated subtropical environment. Seafloor habitats in the Offshore of San Gregorio map area, which lies within the Shelf (continental shelf) megahabitat, range from significant rocky outcrops that support kelp-forest communities nearshore to rocky-reef communities in deep water. Biological productivity resulting from coastal upwelling supports diverse populations of sea birds such as Sooty Shearwater, Western Gull, Common Murre, Cassin's Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of "bull kelp," which is well adapted for high wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

Acoustic mapping of the regional seafloor geology in and around Hawaiian ocean dredged-material disposal sites

USGS Publications Warehouse

Torresan, Michael E.; Gardner, James V.

2000-01-01

During January and February 1998 the U.S. Geological Survey Coastal and Marine Geology Team (USGS) conducted regional high-resolution multibeam mapping surveys of the area surrounding EPA-designated ocean disposal sites located offshore of the Hawaiian Islands of Oahu, Kauai, Maui, and Hawaii. The sites are all located within 5 nautical miles of shore on insular shelves or slopes. Regional maps were required of areas much larger than the disposal sites themselves to assess both the regional seafloor geology and the immediate vicinity of the disposal sites. The purpose of the disposal site surveys was to delimit the extent of disposal material by producing detailed bathymetric and backscatter maps of the seafloor with a ± 1 m spatial accuracy and <1% depth error. The advantage of using multibeam over conventional towed, single-beam sidescan sonar is that the multibeam data are accurately georeferenced for precise location of all imaged features. The multibeam produces a coregistered acoustic-backscatter map that is often required to locate individual disposal deposits. These data were collected by the USGS as part of its regional seafloor mapping and in support of ocean disposal site monitoring studies conducted in cooperation with the US Environmental Protection Agency (EPA) and the US Army Corps of Engineers (COE).

Geological sampling data and benthic biota classification: Buzzards Bay and Vineyard Sound, Massachusetts

USGS Publications Warehouse

Ackerman, Seth D.; Pappal, Adrienne L.; Huntley, Emily C.; Blackwood, Dann S.; Schwab, William C.

2015-01-01

Sea-floor sample collection is an important component of a statewide cooperative mapping effort between the U.S. Geological Survey (USGS) and the Massachusetts Office of Coastal Zone Management (CZM). Sediment grab samples, bottom photographs, and video transects were collected within Vineyard Sound and Buzzards Bay in 2010 aboard the research vesselConnecticut. This report contains sample data and related information, including analyses of surficial-sediment grab samples, locations and images of sea-floor photography, survey lines along which sea-floor video was collected, and a classification of benthic biota observed in sea-floor photographs and based on the Coastal and Marine Ecological Classification Standard (CMECS). These sample data and analyses information are used to verify interpretations of geophysical data and are an essential part of geologic maps of the sea floor. These data also provide a valuable inventory of benthic habitat and resources. Geographic information system (GIS) data, maps, and interpretations, produced through the USGS and CZM mapping cooperative, are intended to aid efforts to manage coastal and marine resources and to provide baseline information for research focused on coastal evolution and environmental change.

Seafloor morphology of the continental slope in front the Petacalco Bay and its tsunamigenic relationship at the Mexican sector of the Middle American subduction zone

NASA Astrophysics Data System (ADS)

Mortera-Gutierrez, C. A.; Bandy, W. L.; Millan-Motolinia, C.; Ponce-Nuñez, F.; Ortega-Ramirez, J.

2014-12-01

The recent occurrence of offshore, large, earthquake ruptures in the western limit of the Guerrero Seismic Gap and the scattered data of seafloor morphology of the continental slope along this sector at the Mexican Mid American subduction zone have encouraged the UNAM marine geophysical group to initiate a mapping program at the Guerrero margin, from the shelf break to the Middle American Trench. The main objective of this initiative is to have a complete cover of the seafloor morphology of the Guerrero slope as the background data for comparative studies of the seafloor deformation in case of future offshore earthquake ruptures in this region. At he first stage of this initiative, we have mapped the continental slope in front the Petacalco Bay, west of the Guerrero Seismic Gap, where three important large earthquakes occurred and caused great damages in Mexico City: Petatlán earthquake (Mw=7.6) at 1979, Michoacán earthquake (Mw=8.1) and its aftershock (Mw=7.9) at 1985. Geophysical results of two campaigns carry in 2012 (MAMRIV12) and 2013 (BABPET13) on board the BO EL PUMA are presented which include multibeam data and subbottom profiles. These data sets cover an area between 101°W and 103°W, and from the shelf-slope break to the trench. The multibeam chart shows details of the hydrological erosion induced by many submarine cannons at the upper slope, whereas the seafloor relief in the lower slope is dominated by tectonic structures. The subbottom profiles and the seafloor morphology evidence zones of big slumps and faults. For first time the Rio Balsas submarine cannon is completed chart, reaching the trench basin. The river course is deflected, possibly by shear faulting. There are slump sites near the trench that probably one is associated to the 1925 tsunami at Zihuatanejo, Guerrero. The 1985 Michoacán aftershock was accompany by a small Tsunami. At that time, the lack of morphology data in this slope inhibited further studies of seafloor-deformation and its tsunamigenic relationship. Funding providing by UNAM-DGAPA-PAPIIT grants: IN115613 and IN115513

Bathymetry and Acoustic Backscatter: Northern Santa Barbara Channel, Southern California

USGS Publications Warehouse

Dartnell, Pete; Finlayson, David; Conrad, Jamie; Cochrane, Guy; Johnson, Samuel

2010-01-01

In the summer of 2008, as part of the California Seafloor Mapping Program (CSMP) the U.S. Geological Survey, Coastal and Marine Geology mapped a nearshore region of the northern Santa Barbara Channel in Southern California (fig 1). The CSMP is a cooperative partnership between Federal and State agencies, Universities, and Industry to create a comprehensive coastal/marine geologic and habitat basemap series to support the Marine Life Protection Act (MLPA) inititive. The program is supported by the California Ocean Protection Council and the California Coastal Conservancy. The 2008 mapping collected high resolution bathymetry and acoustic backscatter data using a bathymetric side scan system within State waters from about the 10-m isobath out over 3-nautical miles. This Open-File Report provides these data in a number of different formats, as well as a summary of the mapping mission, maps of bathymetry and backscatter, and FGDC metadata.

Seafloor habitat mapping of the New York Bight incorporating sidescan sonar data

USGS Publications Warehouse

Lathrop, R.G.; Cole, M.; Senyk, N.; Butman, B.

2006-01-01

The efficacy of using sidescan sonar imagery, image classification algorithms and geographic information system (GIS) techniques to characterize the seafloor bottom of the New York Bight were assessed. The resulting seafloor bottom type map was compared with fish trawl survey data to determine whether there were any discernable habitat associations. An unsupervised classification with 20 spectral classes was produced using the sidescan sonar imagery, bathymetry and secondarily derived spatial heterogeneity to characterize homogenous regions within the study area. The spectral classes, geologic interpretations of the study region, bathymetry and a bottom landform index were used to produce a seafloor bottom type map of 9 different bottom types. Examination of sediment sample data by bottom type indicated that each bottom type class had a distinct composition of sediments. Analysis of adult summer flounder, Paralichthys dentatus, and adult silver hake, Merluccius bilinearis, presence/absence data from trawl surveys did not show evidence of strong associations between the species distributions and seafloor bottom type. However, the absence of strong habitat associations may be more attributable to the coarse scale and geographic uncertainty of the trawl sampling data than conclusive evidence that no habitat associations exist for these two species. ?? 2006 Elsevier Ltd. All rights reserved.

Global patterns and predictions of seafloor biomass using random forests.

PubMed

Wei, Chih-Lin; Rowe, Gilbert T; Escobar-Briones, Elva; Boetius, Antje; Soltwedel, Thomas; Caley, M Julian; Soliman, Yousria; Huettmann, Falk; Qu, Fangyuan; Yu, Zishan; Pitcher, C Roland; Haedrich, Richard L; Wicksten, Mary K; Rex, Michael A; Baguley, Jeffrey G; Sharma, Jyotsna; Danovaro, Roberto; MacDonald, Ian R; Nunnally, Clifton C; Deming, Jody W; Montagna, Paul; Lévesque, Mélanie; Weslawski, Jan Marcin; Wlodarska-Kowalczuk, Maria; Ingole, Baban S; Bett, Brian J; Billett, David S M; Yool, Andrew; Bluhm, Bodil A; Iken, Katrin; Narayanaswamy, Bhavani E

2010-12-30

A comprehensive seafloor biomass and abundance database has been constructed from 24 oceanographic institutions worldwide within the Census of Marine Life (CoML) field projects. The machine-learning algorithm, Random Forests, was employed to model and predict seafloor standing stocks from surface primary production, water-column integrated and export particulate organic matter (POM), seafloor relief, and bottom water properties. The predictive models explain 63% to 88% of stock variance among the major size groups. Individual and composite maps of predicted global seafloor biomass and abundance are generated for bacteria, meiofauna, macrofauna, and megafauna (invertebrates and fishes). Patterns of benthic standing stocks were positive functions of surface primary production and delivery of the particulate organic carbon (POC) flux to the seafloor. At a regional scale, the census maps illustrate that integrated biomass is highest at the poles, on continental margins associated with coastal upwelling and with broad zones associated with equatorial divergence. Lowest values are consistently encountered on the central abyssal plains of major ocean basins The shift of biomass dominance groups with depth is shown to be affected by the decrease in average body size rather than abundance, presumably due to decrease in quantity and quality of food supply. This biomass census and associated maps are vital components of mechanistic deep-sea food web models and global carbon cycling, and as such provide fundamental information that can be incorporated into evidence-based management.

Global Patterns and Predictions of Seafloor Biomass Using Random Forests

PubMed Central

Wei, Chih-Lin; Rowe, Gilbert T.; Escobar-Briones, Elva; Boetius, Antje; Soltwedel, Thomas; Caley, M. Julian; Soliman, Yousria; Huettmann, Falk; Qu, Fangyuan; Yu, Zishan; Pitcher, C. Roland; Haedrich, Richard L.; Wicksten, Mary K.; Rex, Michael A.; Baguley, Jeffrey G.; Sharma, Jyotsna; Danovaro, Roberto; MacDonald, Ian R.; Nunnally, Clifton C.; Deming, Jody W.; Montagna, Paul; Lévesque, Mélanie; Weslawski, Jan Marcin; Wlodarska-Kowalczuk, Maria; Ingole, Baban S.; Bett, Brian J.; Billett, David S. M.; Yool, Andrew; Bluhm, Bodil A.; Iken, Katrin; Narayanaswamy, Bhavani E.

2010-01-01

A comprehensive seafloor biomass and abundance database has been constructed from 24 oceanographic institutions worldwide within the Census of Marine Life (CoML) field projects. The machine-learning algorithm, Random Forests, was employed to model and predict seafloor standing stocks from surface primary production, water-column integrated and export particulate organic matter (POM), seafloor relief, and bottom water properties. The predictive models explain 63% to 88% of stock variance among the major size groups. Individual and composite maps of predicted global seafloor biomass and abundance are generated for bacteria, meiofauna, macrofauna, and megafauna (invertebrates and fishes). Patterns of benthic standing stocks were positive functions of surface primary production and delivery of the particulate organic carbon (POC) flux to the seafloor. At a regional scale, the census maps illustrate that integrated biomass is highest at the poles, on continental margins associated with coastal upwelling and with broad zones associated with equatorial divergence. Lowest values are consistently encountered on the central abyssal plains of major ocean basins The shift of biomass dominance groups with depth is shown to be affected by the decrease in average body size rather than abundance, presumably due to decrease in quantity and quality of food supply. This biomass census and associated maps are vital components of mechanistic deep-sea food web models and global carbon cycling, and as such provide fundamental information that can be incorporated into evidence-based management. PMID:21209928

Particle Mass in Deep-Water Benthic Nepheloid Layers: a Global Synthesis

NASA Astrophysics Data System (ADS)

Mishonov, A. V.; Gardner, W. D.; Richardson, M. J.

2016-12-01

The mass of particles in benthic nepheloid layers in the deep ocean is mapped using profiles of beam attenuation coefficient obtained with transmissometers interfaced with CTDs during WOCE, SAVE, JGOFS, CLIVAR-Repeat Hydrography, and other programs during the last four decades using data from over 8000 profiles from >70 cruises. We map the maximum concentration of particle mass near the seafloor and integrate the particle mass throughout the benthic nepheloid layer. In the Atlantic Ocean particle mass is greater in areas where eddy kinetic energy is high in overlying waters. Areas of high bottom particle concentrations and integrated benthic nepheloid layer particle loads include the western North Atlantic beneath the Gulf Stream meanders and eddies, Argentine Basin, parts of the Southern Ocean and areas around South Africa. Particle concentrations are low in most of the Pacific and tropical and subtropical Atlantic away from margins. This synthesis is useful for GEOTRACES and other global programs where knowing particle distribution is critical for understanding trace metal absorption, sediment-water exchange and near-bottom processes. Additionally, our synthesis provides baseline data to identify where mining of metal-rich nodules and metal sulfides on the seafloor may impact the benthic environment.

Seep Detection using E/V Nautilus Integrated Seafloor Mapping and Remotely Operated Vehicles on the United States West Coast

NASA Astrophysics Data System (ADS)

Gee, L. J.; Raineault, N.; Kane, R.; Saunders, M.; Heffron, E.; Embley, R. W.; Merle, S. G.

2017-12-01

Exploration Vessel (E/V) Nautilus has been mapping the seafloor off the west coast of the United States, from Washington to California, for the past three years with a Kongsberg EM302 multibeam sonar. This system simultaneously collects bathymetry, seafloor and water column backscatter data, allowing an integrated approach to mapping to more completely characterize a region, and has identified over 1,000 seafloor seeps. Hydrographic multibeam sonars like the EM302 were designed for mapping the bathymetry. It is only in the last decade that major mapping projects included an integrated approach that utilizes the seabed and water column backscatter information in addition to the bathymetry. Nautilus mapping in the Eastern Pacific over the past three years has included a number of seep-specific expeditions, and utilized and adapted the preliminary mapping guidelines that have emerged from research. The likelihood of seep detection is affected by many factors: the environment: seabed geomorphology, surficial sediment, seep location/depth, regional oceanography and biology, the nature of the seeps themselves: size variation, varying flux, depth, and transience, the detection system: design of hydrographic multibeam sonars limits use for water column detection, the platform: variations in the vessel and operations such as noise, speed, and swath overlap. Nautilus integrated seafloor mapping provided multiple indicators of seep locations, but it remains difficult to assess the probability of seep detection. Even when seeps were detected, they have not always been located during ROV dives. However, the presence of associated features (methane hydrate and bacterial mats) serve as evidence of potential seep activity and reinforce the transient nature of the seeps. Not detecting a seep in the water column data does not necessarily indicate that there is not a seep at a given location, but with multiple passes over an area and by the use of other contextual data, an area may be classified as likely or unlikely to host seeps.

California State Waters Map Series: offshore of Half Moon Bay, California

USGS Publications Warehouse

Cochrane, Guy R.; Dartnell, Peter; Greene, H. Gary; Johnson, Samuel Y.; Golden, Nadine E.; Hartwell, Stephen R.; Dieter, Bryan E.; Manson, Michael W.; Sliter, Ray W.; Ross, Stephanie L.; Watt, Janet T.; Endris, Charles A.; Kvitek, Rikk G.; Phillips, Eleyne L.; Erdey, Mercedes D.; Chin, John L.; Bretz, Carrie K.

2014-01-01

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Half Moon Bay map area is located in northern California, on the Pacific coast of the San Francisco Peninsula about 40 kilometers south of the Golden Gate. The city of Half Moon Bay, which is situated on the east side of the Half Moon Bay embayment, is the nearest significant onshore cultural center in the map area, with a population of about 11,000. The Pillar Point Harbor at the north edge of Half Moon Bay offers a protected landing for boats and provides other marine infrastructure. The map area lies offshore of the Santa Cruz Mountains, part of the northwest-trending Coast Ranges that run roughly parallel to the San Andreas Fault Zone. The Santa Cruz Mountains lie between the San Andreas Fault Zone and the San Gregorio Fault system. The flat coastal area, which is the most recent of numerous marine terraces, was formed by wave erosion about 105 thousand years ago. The higher elevation of this same terrace west of the Half Moon Bay Airport is caused by uplift on the Seal Cove Fault, a splay of the San Gregorio Fault Zone. Although originally incised into the rising terrain horizontally, the ancient terrace surface has been gently folded into a northwest-plunging syncline by compression related to right-lateral strike-slip movement along the San Gregorio Fault Zone. The lowest elevation coincides with the deepest part of Half Moon Bay; the terrace surface rises both to the north and to the south. Uplift in this map area has resulted in relatively shallow water depths within California’s State Waters and, thus, little accommodation space for sediment accumulation. Sediment is observed in the shelter of Half Moon Bay and on the outer half of the California’s State Waters shelf. Sediment in the area is mobile, often forming dunes and sand waves. A westward bend in the San Andreas Fault Zone, southeast of the map area, coupled with right-lateral movement along the Seal Cove Fault, which comes ashore in Pillar Point Harbor, has resulted in the folding and uplifting of sedimentary rocks of the Purisima Formation in the offshore. Differential erosion of these folded and faulted layers of the Purisima Formation has exposed the parallel curved-rock ridges that are visible on the seafloor from the headland at Pillar Point. During the winter, strong North Pacific storms generate large, long-period waves that shoal and break over this bedrock reef at the world-famous surfing location known as Mavericks. The Offshore of Half Moon Bay map area lies within the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, an eastern limb of the North Pacific subtropical gyre that flows from Oregon to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 365 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off central California has experienced a warming over the last 50 years that is driving an ecosystem shift away from the productive subarctic regime towards a depopulated subtropical environment. Seafloor habitats in the Offshore of Half Moon Bay map area, which lies within the Shelf (continental shelf) megahabitat, range from significant rocky outcrops that support kelp-forest communities nearshore to rocky-reef communities in deep water. Biological productivity resulting from coastal upwelling supports populations of sea birds such as Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

Nearshore Hydroacoustic Seafloor Mapping In The German Bight (North Sea): Hydroacoustic Interpretation With And Without Classification

NASA Astrophysics Data System (ADS)

Hass, H. C.; Mielck, F.; Papenmeier, S.

2016-12-01

Nearshore habitats are in constant dynamic change. They need regular assessment and appropriate monitoring of areas of special interest. To accomplish this, hydroacoustic seabed characterization tools are applied to allow for cost-effective and efficient mapping of the seafloor. In this context single beam echosounders (SBES) systems provide a comprehensive view by analyzing the hardness and roughness characteristics of the seafloor. Interpolation between transect lines becomes necessary when gapless maps are needed. This study presents a simple method to process and visualize data recorded with RoxAnn (Sonavision, Edinburgh, UK) and similar SBES. Both, hardness and roughness data are merged to one combined parameter that receives a color code (RGB) according to the acoustic properties of the seafloor. This color information is then interpolated to obtain an area-wide map that provides unclassified and thus unbiased seabed information. The RGB color data can subsequently be used for classification and modeling purposes. Four surveys are shown from a morphologically complex nearshore area west of the island of Helgoland (SE North Sea). The area has complex textural and dynamic characteristics reaching from outcropping bedrock via sandy to muddy areas with mostly gradual transitions. RoxAnn data allow to discriminate all seafloor types that were suggested by ground-truth information (seafloor samples, video). The area appears to be fluctuating within certain limits. Sediment import (sand and fluid mud) paths can be reconstructed. Manually, six RoxAnn zones (RZ) were identified and left without hard boundaries to better match the seafloor types of the study site. The k-means fuzzy cluster analysis employed yields best results with 3 classes. We show that interpretations on the basis of largely non-classified, color-coded and interpolated data provide the best gain of information in the highest possible resolution. Classification with hard boundaries is necessary for stakeholders but may cause reduction of information important to science. It becomes apparent that the type of classification addressing stakeholder issues is not always compatible with scientific objectives.

E/V Nautilus Detection of Isolated Features in the Eastern Pacific Ocean: Newly Discovered Calderas and Methane Seeps

NASA Astrophysics Data System (ADS)

Raineault, N.; Irish, O.; Lubetkin, M.

2016-02-01

The E/V Nautilus mapped over 80,000 km2 of the seafloor in the Gulf of Mexico and Eastern Pacific Ocean during its 2015 expedition. The Nautilus used its Kongsberg EM302 multibeam system to map the seafloor prior to remotely operated vehicle (ROV) dives, both for scientific purposes (site selection) and navigational safety. The Nautilus also routinely maps during transits to identify previously un-mapped or unresolved seafloor features. During its transit from the Galapagos Islands to the California Borderland, the Nautilus mapped 44,695 km2 of seafloor. Isolated features on the seafloor and in the water-column, such as calderas and methane seeps, were detected during this data collection effort. Operating at a frequency of 30 kHz in waters ranging from 1000-5500 m, we discovered caldera features off the coast of Central America. Since seamounts are known hotspots of biodiversity, locating new ones may enrich our understanding of seamounts as "stepping stones" for species distribution and ocean current pathways. Satellite altimetry datasets prior to this data either did not discern these calderas or recognized the presence of a bathymetric high without great detail. This new multibeam bathymetry data, gridded at 50 m, gives a precise look at these seamounts that range in elevation from 350 to 1400 m from abyssal depth. The largest of the calderas is circular in shape and is 10,000 m in length and 5,000 m in width, with a distinct circular depression at the center of its highest point, 1,400 m above the surrounding abyssal depth. In the California Borderland region, located between San Diego and Los Angeles, four new seeps were discovered in water depths from 400-1,020 m. ROV exploration of these seeps revealed vent communities. Altogether, these discoveries reinforce how little we know about the global ocean, indicate the presence of isolated deep-sea ecosystems that support biologically diverse communities, and will impact our understanding of seafloor habitat.

Mapping the seafloor, with end users in mind

NASA Astrophysics Data System (ADS)

Lecours, V.

2017-12-01

In the last 25 years, as more seafloor data and user-friendly analysis tools have become available, the amount and diversity of applications making use of such data have considerably increased. While limitations in the utility of the data caused by the data collection and processing methods may be quite apparent to experts, such limitations may be less obvious to users with different background and expertise. For instance, it has been acknowledged many times in the literature that seafloor data are often treated as true representations of the seafloor rather that as models. This lack of understanding brings hidden dangers to unsuspecting end users misusing data, which may result in misleading outcomes/conclusions for different applications like marine geomorphology, marine habitat mapping, marine conservation, and management of marine resources. In this paper, I identify common practices of both data producers and users that can prevent a proper use of seafloor data. Using seafloor data from a variety of locations and sources, I demonstrate how the choice of soundings interpolator, elements of data quality, scale alterations, and backscatter representation can impact applications. I show how these elements propagate throughout analyses and directly influence outcomes, sometimes in predictable ways (e.g. in marine geomorphology) and sometimes in unpredictable ways (e.g. in marine habitat mapping). Regardless of the final use of seafloor data, better and more transparent error and uncertainty quantification and representation should be implemented at the data collection, processing, and analysis levels. Complete metadata should always be documented, with elements related to data provenance, survey, scale, error and uncertainty quantification, and any other information relevant to further use of seafloor data, in order to create a community of users aware of data quality and limitations. As the number of applications using seafloor data increases, some of the fundamental issues associated with the nature of the data are not being addressed quickly or broadly enough, increasing the risk of misuse. There is a need to reunite data collectors and users to fulfill the potential of seafloor data for different applications.

Distribution and Characteristics of Seafloor Seepage Features in the Active Margin Offshore of SW Taiwan

NASA Astrophysics Data System (ADS)

Chen, T. T.; Hsu, H. H.; Liu, C. S.; Su, C. C.; Paull, C. K.; Chen, Y. H.; Caress, D. W.; Gwiazda, R.; Lundsten, E. M.

2017-12-01

In the active margin offshore of southwest (SW) Taiwan, west-vergent imbricated thrusts, folds and dipping strata are the main structural features. This is also the area where gas hydrates are widely distributed beneath the seafloor. Fluids from deep strata may migrate upwards along porous dipping layers or faults and then vent out to form seafloor seepage features in many of the gas hydrate prospects. A joint survey was conducted in May 2017 using MBARI mapping AUV and miniROV to investigate the seafloor seepage features. Numerous comet-shaped depressions (CSD) are mapped along flanks of several anticlinal ridges, and four carbonate mounds around CSD are observed from the ultra-high-resolution (1-m lateral resolution) bathymetry data collected by AUV. Samples of the carbonate mounds were collected by the mini-ROV, and their mineral compositions contain dolomite and ankerite. The AUV collected chirp sonar profiles and previously collected surface ship multichannel seismic reflection profiles across these seafloor features show that potential fluid migration pathways connect free gas trapped below the base of gas hydrate stability zone and the seafloor in the vicinity of these features. Our study suggests that the CSD could be an indicator of seafloor seepage and may be distribution widely in the active margin setting.

First hyperspectral survey of the deep seafloor: DISCOL area, Peru Basin

NASA Astrophysics Data System (ADS)

Dumke, Ines; Nornes, Stein M.; Ludvigsen, Martin

2017-04-01

Conventional hyperspectral seafloor surveys using airborne or satellite platforms are typically limited to shallow coastal areas. This limitation is due to the requirement for illumination by sunlight, which does not penetrate into deeper waters. For hyperspectral studies in deeper marine environments, such as the deep sea, a close-range, sunlight-independent survey approach is therefore required. Here, we present the first hyperspectral data from the deep seafloor. The data were acquired in 4200 m water depth in the DISCOL (disturbance-recolonization) area in the Peru Basin (SW Pacific). This area is characterized by seafloor manganese nodules and recolonization by benthic fauna after a seafloor disturbance experiment conducted in 1989, and was revisited in 2015 by the JPI Oceans cruise SO-242. The acquisition setup consisted of a new Underwater Hyperspectral Imager (UHI) mounted on a remotely operated vehicle (ROV), which provided illumination of the seafloor. High spatial and spectral resolution were achieved by an ROV altitude of 1 m and recording of 112 spectral bands between 380 nm and 800 nm (4 nm resolution). Spectral classification was performed to classify manganese nodules and benthic fauna and map their distribution in the study area. The results demonstrate the high potential of underwater hyperspectral imaging in mapping and classifying seafloor deposits and habitats.

California State Waters Map Series — Offshore of Point Conception, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Hartwell, Stephen R.; Golden, Nadine E.; Kvitek, Rikk G.; Davenport, Clifton W.; Johnson, Samuel Y.; Cochran, Susan A.

2018-04-20

IntroductionIn 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology.The Offshore of Point Conception map area is in the westernmost part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and this region is presently undergoing north-south shortening. The offshore part of the map area lies south of the steep south and west flanks of the Santa Ynez Mountains. The crest of the range, which has a maximum elevation of about 340 m in the map area, lies about 5 km north and east of the arcuate shoreline.The onland part of the coastal zone is remote and sparsely populated. The road to Jalama Beach County Park provides the only public coastal access in the entire map area. North of this county park, the coastal zone is part of Vandenberg Air Force Base. South of Jalama Beach County Park, most of the coastal zone is part of the Cojo-Jalama Ranch, purchased by the Nature Conservancy in December 2017. A relatively small part of the coastal zone in the eastern part of the map area lies within the privately owned Hollister Ranch. The nearest significant commercial centers are Lompoc (population, about 42,000), about 10 km north of the map area, and Goleta (population, about 30,000), about 50 km east of the map area. The Union Pacific railroad tracks run west and northwest along the coast through the entire map area, within a few hundred meters of the shoreline. The map area has a long history of petroleum exploration, and the seafloor notably includes large asphalt mounds and pockmarks that result from petroleum seepage. Several offshore gas and oil fields were discovered, and some were developed, in and on the margin of California’s State Waters.Much of the shoreline in the Offshore of Point Conception map area is characterized by narrow beaches that have thin sediment cover above bedrock platforms, backed by low (10- to 20-m-high) cliffs that are capped by a coastal terrace. Beaches are subject to wave erosion during winter storms, followed by gradual sediment recovery or accretion in the late spring, summer, and fall months during the gentler wave climate. The map area lies in the west-central part of the Santa Barbara littoral cell, which is characterized by west-to-east transport of sediment from Point Arguello on the northwest to Hueneme and Mugu Canyons on the southeast. Sediment supply to the map area is mainly from relatively small coastal watersheds, including the Jalama Creek–Espada Creek drainage basin (about 63 km2), as well as Cañada del Jolloru, Black Canyon, Wood Canyon, Cañada del Cojo, and Barranca Honda. Coastal-watershed discharge and sediment load are highly variable, characterized by brief large events during major winter storms and long periods of low (or no) flow and minimal sediment load between storms. In recent (recorded) history, the majority of high-discharge, high-sediment-flux events have been associated with El Niño phases of the El Niño–Southern Oscillation climatic pattern.Following the coastline, the shelf bends to the north and northwest around Point Conception, and the trend of the shelf break changes from about 298° to 241° azimuth. Shelf width ranges from about 5 km south of Point Conception to about 11 km northwest of it; the slope ranges from about 1.0° to 1.2° to about 0.7° south and northwest of Point Conception, respectively. Southwest of Point Conception, the shelf break and upper slope are incised by a 600-m-wide, 20- to 30-m-deep, south-facing trough, one of five heads of the informally named Arguello submarine canyon.The map area is located at a major biogeographic transition zone between the east-west-trending Santa Barbara Channel region of the Southern California Bight and the northwest-trending central California coast. North of Point Conception, the coast is subjected to high wave exposure from the north, west, and south, as well as consistently strong upwelling that brings cold, nutrient-rich waters to the surface. Southeast of Point Conception, the Santa Barbara Channel is largely protected from strong north swells by Point Conception and from south swells by the Channel Islands; surface waters are warmer, and upwelling is weak and seasonal.Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft, unconsolidated sediment interspersed with isolated areas of rocky habitat that support kelp-forest communities in the nearshore and rocky-reef communities in deeper water. The potential marine benthic habitat types mapped in the Offshore of Point Conception map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats. The fairly homogeneous seafloor of sediment and low-relief bedrock provides characteristic habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms. Several areas of smooth sediment form nearshore terraces that have relatively steep, smooth fronts, which are attractive to groundfish. Below the steep shelf break, soft, unconsolidated sediment is interrupted by the heads of several submarine canyons, gullies, and rills, also good potential habitat for rockfish. The map area includes the large (58.3 km2) Point Conception State Marine Reserve.

Predicted seafloor facies of Central Santa Monica Bay, California

USGS Publications Warehouse

Dartnell, Peter; Gardner, James V.

2004-01-01

Summary -- Mapping surficial seafloor facies (sand, silt, muddy sand, rock, etc.) should be the first step in marine geological studies and is crucial when modeling sediment processes, pollution transport, deciphering tectonics, and defining benthic habitats. This report outlines an empirical technique that predicts the distribution of seafloor facies for a large area offshore Los Angeles, CA using high-resolution bathymetry and co-registered, calibrated backscatter from multibeam echosounders (MBES) correlated to ground-truth sediment samples. The technique uses a series of procedures that involve supervised classification and a hierarchical decision tree classification that are now available in advanced image-analysis software packages. Derivative variance images of both bathymetry and acoustic backscatter are calculated from the MBES data and then used in a hierarchical decision-tree framework to classify the MBES data into areas of rock, gravelly muddy sand, muddy sand, and mud. A quantitative accuracy assessment on the classification results is performed using ground-truth sediment samples. The predicted facies map is also ground-truthed using seafloor photographs and high-resolution sub-bottom seismic-reflection profiles. This Open-File Report contains the predicted seafloor facies map as a georeferenced TIFF image along with the multibeam bathymetry and acoustic backscatter data used in the study as well as an explanation of the empirical classification process.

Assessment of habitat representation across a network of marine protected areas with implications for the spatial design of monitoring.

PubMed

Young, Mary; Carr, Mark

2015-01-01

Networks of marine protected areas (MPAs) are being adopted globally to protect ecosystems and supplement fisheries management. The state of California recently implemented a coast-wide network of MPAs, a statewide seafloor mapping program, and ecological characterizations of species and ecosystems targeted for protection by the network. The main goals of this study were to use these data to evaluate how well seafloor features, as proxies for habitats, are represented and replicated across an MPA network and how well ecological surveys representatively sampled fish habitats inside MPAs and adjacent reference sites. Seafloor data were classified into broad substrate categories (rock and sediment) and finer scale geomorphic classifications standard to marine classification schemes using surface analyses (slope, ruggedness, etc.) done on the digital elevation model derived from multibeam bathymetry data. These classifications were then used to evaluate the representation and replication of seafloor structure within the MPAs and across the ecological surveys. Both the broad substrate categories and the finer scale geomorphic features were proportionately represented for many of the classes with deviations of 1-6% and 0-7%, respectively. Within MPAs, however, representation of seafloor features differed markedly from original estimates, with differences ranging up to 28%. Seafloor structure in the biological monitoring design had mismatches between sampling in the MPAs and their corresponding reference sites and some seafloor structure classes were missed entirely. The geomorphic variables derived from multibeam bathymetry data for these analyses are known determinants of the distribution and abundance of marine species and for coastal marine biodiversity. Thus, analyses like those performed in this study can be a valuable initial method of evaluating and predicting the conservation value of MPAs across a regional network.

Assessment of Habitat Representation across a Network of Marine Protected Areas with Implications for the Spatial Design of Monitoring

PubMed Central

Young, Mary; Carr, Mark

2015-01-01

Networks of marine protected areas (MPAs) are being adopted globally to protect ecosystems and supplement fisheries management. The state of California recently implemented a coast-wide network of MPAs, a statewide seafloor mapping program, and ecological characterizations of species and ecosystems targeted for protection by the network. The main goals of this study were to use these data to evaluate how well seafloor features, as proxies for habitats, are represented and replicated across an MPA network and how well ecological surveys representatively sampled fish habitats inside MPAs and adjacent reference sites. Seafloor data were classified into broad substrate categories (rock and sediment) and finer scale geomorphic classifications standard to marine classification schemes using surface analyses (slope, ruggedness, etc.) done on the digital elevation model derived from multibeam bathymetry data. These classifications were then used to evaluate the representation and replication of seafloor structure within the MPAs and across the ecological surveys. Both the broad substrate categories and the finer scale geomorphic features were proportionately represented for many of the classes with deviations of 1-6% and 0-7%, respectively. Within MPAs, however, representation of seafloor features differed markedly from original estimates, with differences ranging up to 28%. Seafloor structure in the biological monitoring design had mismatches between sampling in the MPAs and their corresponding reference sites and some seafloor structure classes were missed entirely. The geomorphic variables derived from multibeam bathymetry data for these analyses are known determinants of the distribution and abundance of marine species and for coastal marine biodiversity. Thus, analyses like those performed in this study can be a valuable initial method of evaluating and predicting the conservation value of MPAs across a regional network. PMID:25760858

Development of a Florida Coastal Mapping Program Through Local and Regional Coordination

NASA Astrophysics Data System (ADS)

Hapke, C. J.; Kramer, P. A.; Fetherston-Resch, E.; Baumstark, R.

2017-12-01

The State of Florida has the longest coastline in the contiguous United States (2,170 km). The coastal zone is heavily populated and contains 1,900 km of sandy beaches that support economically important recreation and tourism. Florida's waters also host important marine mineral resources, unique ecosystems, and the largest number of recreational boats and saltwater fishermen in the country. There is increasing need and demand for high resolution data of the coast and adjacent seafloor for resource and habitat mapping, understanding coastal vulnerability, evaluating performance of restoration projects, and many other coastal and marine spatial planning efforts. The Florida Coastal Mapping Program (FCMP), initiated in 2017 as a regional collaboration between four federal and three state agencies, has goals of establishing the priorities for high resolution seafloor mapping of Florida's coastal environment, and developing a strategy for leveraging funds to support mapping priorities set by stakeholders. We began by creating a comprehensive digital inventory of existing data (collected by government, the private sector, and academia) from 1 kilometer inland to the 200 meter isobath for a statewide geospatial database and gap analysis. Data types include coastal topography, bathymetry, and acoustic data such as sidescan sonar and subbottom profiles. Next, we will develop appropriate proposals and legislative budget requests in response to opportunities to collect priority data in high priority areas. Data collection will be undertaken by a combination of state and federal agencies. The FCMP effort will provide the critical baseline information that is required for characterizing changes to fragile ecosystems, assessing marine resources, and forecasting the impacts on coastal infrastructure and recreational beaches from future storms and sea-level rise.

Imaging Small-scale Seafloor and Sub-seafloor Tectonic Fabric Using Satellite Altimetry

NASA Astrophysics Data System (ADS)

Sandwell, D. T.; Müller, D.; Matthews, K. J.; Smith, W. H. F.

2017-12-01

Marine gravity anomalies derived from satellite radar altimetry now provide an unprecedented resolution of about 7 km for mapping small-scale seafloor and sub-seafloor tectonic fabric. These gravity maps are improving rapidly because three satellite altimeters are currently collecting data with dense track coverage: (1) CryoSat-2 has routinely collected altimetry data over ice, land, and ocean since July 2010. The satellite has a long 369-day repeat cycle resulting in an average ground track spacing of 3.5 km at the equator. To date it has completed more than 7 geodetic mappings of the ocean surface. (2) The SARAL AltiKa altimeter began a non-repeat orbit phase in July 2016. AltiKa has a new Ka-band instrument with a factor of 2 better range precision than all previous altimeters. (3) Jason-2 was placed in a geodetic orbit starting July 2017. It has lower inclination coverage to provide improved gravity recovery for N-S trending anomalies. These data combined with sparse soundings will provide a dramatic improvement in predicted bathymetry and thus help guide future deep ocean surveys. The most recent global marine gravity anomaly map based on these geodetic mission data with 2-pass retracking for optimal range precision has an accuracy that is 2-4 times better than the maps derived from Geosat and ERS-1. The new data reveal the detailed fabric of fracture zones, previously unmapped, now extinct oceanic microplates in the central Pacific, and fault networks buried beneath thick sediments along continental margins. By combining satellite altimetry with marine magnetic anomalies and seafloor age dates from rock samples we are able to pinpoint the geometry and age of major plate reorganizations, particularly the enigmatic 100 Ma event, which occurred during the Cretaceous Magnetic Superchron.

Mapping the seafloor geology offshore of Massachusetts

USGS Publications Warehouse

Barnhardt, Walter A.; Andrews, Brian D.

2006-01-01

Geologic and bathymetric maps help us understand the evolutionary history of the Massachusetts coast and the processes that have shaped it. The maps show the distribution of bottom types (for example, bedrock, gravel, sand, mud) and water depths over large areas of the seafloor. In turn, these two fundamental parameters largely determine the species of flora and fauna that inhabit a particular area. Knowledge of bottom types and water depths provides a framework for mapping benthic habitats and managing marine resources. The need for coastal–zone mapping to inform policy and management is widely recognized as critical for mitigating hazards, creating resource inventories, and tracking environmental changes (National Research Council, 2004; U.S. Commission on Ocean Policy, 2004).

Habitat diversity in the Northeastern Gulf of Mexico: Selected video clips from the Gulfstream Natural Gas Pipeline digital archive

USGS Publications Warehouse

Raabe, Ellen A.; D'Anjou, Robert; Pope, Domonique K.; Robbins, Lisa L.

2011-01-01

This project combines underwater video with maps and descriptions to illustrate diverse seafloor habitats from Tampa Bay, Florida, to Mobile Bay, Alabama. A swath of seafloor was surveyed with underwater video to 100 meters (m) water depth in 1999 and 2000 as part of the Gulfstream Natural Gas System Survey. The U.S. Geological Survey (USGS) in St. Petersburg, Florida, in cooperation with Eckerd College and the Florida Department of Environmental Protection (FDEP), produced an archive of analog-to-digital underwater movies. Representative clips of seafloor habitats were selected from hundreds of hours of underwater footage. The locations of video clips were mapped to show the distribution of habitat and habitat transitions. The numerous benthic habitats in the northeastern Gulf of Mexico play a vital role in the region's economy, providing essential resources for tourism, natural gas, recreational water sports (fishing, boating, scuba diving), materials, fresh food, energy, a source of sand for beach renourishment, and more. These submerged natural resources are important to the economy but are often invisible to the general public. This product provides a glimpse of the seafloor with sample underwater video, maps, and habitat descriptions. It was developed to depict the range and location of seafloor habitats in the region but is limited by depth and by the survey track. It should not be viewed as comprehensive, but rather as a point of departure for inquiries and appreciation of marine resources and seafloor habitats. Further information is provided in the Resources section.

Archive of Boomer Subbottom Data Collected During USGS Cruise SEAX 96004, New York Bight, 1 May - 9 June 1996

USGS Publications Warehouse

Hill, Jenna C.; Schwab, William C.; Foster, David S.

2000-01-01

Beginning in 1995, the USGS, in cooperation with the U.S Army Corps of Engineers (USACE), New York District, began a program to generate reconnaissance maps of the sea floor offshore of the New York-New Jersey metropolitan area, one of the most populated coastal regions of the United States. The goal of this mapping program is to provide a regional synthesis of the sea-floor environment, including a description of sedimentary environments, sediment texture, seafloor morphology, and geologic history to aid in understanding the impacts of anthropogenic activities, such as ocean dumping. This mapping effort differs from previous studies of this area by obtaining digital, sidescan sonar images that cover 100 percent of the sea floor.This investigation was motivated by the need to develop an environmentally acceptable solution for the disposal of dredged material from the New York - New Jersey Port, by the need to identify potential sources of sand for renourishment of the southern shore of Long island, and by the opportunity to develop a better understanding of the transport and long-term fate of contaminants by investigations of the present distribution of materials discharged into the New York Bight over the last 100+ years (Schwab and others, 1997). Data collected in 1996, USGS cruise SEAX 96004, augments data collected in 1995 with sidescan sonar and seismic reflection data collected within the New York Bight Apex region. This report is an archive of the boomer seismic reflection data collected in 1996.

Texture, Carbonate Content, and Preliminary Maps of Surficial Sediments of the Flower Garden Banks Area, Northwestern Gulf of Mexico Outer Shelf

USGS Publications Warehouse

Scanlon, Kathryn M.; Ackerman, Seth D.; Rozycki, Jill E.

2003-01-01

The purpose of this report is to release texture and carbonate content analyses of 107 seafloor sediments collected within and near the East and West Flower Garden Banks areas of the Sanctuary and to show relationships between these data and existing bathymetric data. The sediment data, in conjunction with previously collected geological, geophysical and biological data were used to construct a reconnaissance-scale map of the distribution of seafloor sediment types. This map will be useful for resource managers and can be used, with additional data, as a basis for future habitat mapping.

High-Resolution Underwater Mapping Using Side-Scan Sonar

PubMed Central

2016-01-01

The goal of this study is to generate high-resolution sea floor maps using a Side-Scan Sonar(SSS). This is achieved by explicitly taking into account the SSS operation as follows. First, the raw sensor data is corrected by means of a physics-based SSS model. Second, the data is projected to the sea-floor. The errors involved in this projection are thoroughfully analysed. Third, a probabilistic SSS model is defined and used to estimate the probability of each sea-floor region to be observed. This probabilistic information is then used to weight the contribution of each SSS measurement to the map. Because of these models, arbitrary map resolutions can be achieved, even beyond the sensor resolution. Finally, a geometric map building method is presented and combined with the probabilistic approach. The resulting map is composed of two layers. The echo intensity layer holds the most likely echo intensities at each point in the sea-floor. The probabilistic layer contains information about how confident can the user or the higher control layers be about the echo intensity layer data. Experimental results have been conducted in a large subsea region. PMID:26821379

Bathymetry & Geomorphology - A New Seafloor Mapping of the Israeli Exclusive Economic Zone

NASA Astrophysics Data System (ADS)

Tibor, G.; Hall, J. K.; Kanari, M.; Sade, R. A.; Sade, H.; Amit, G.; Gur-Arie, L.; Ketter, T.

2017-12-01

Recent extensive activities of oil and gas exploration and production companies in the Israeli Exclusive Economic Zone (EEZ) raised the need for an up-to-date baseline mapping of the seafloor to assist policy makers. The baseline mapping focused on bathymetry, geomorphology, geology, biodiversity, infauna and habitat in order to compile a sensitivity map for the Petroleum Commissioner in the Ministry of Energy in the bid for opening the sea to new natural gas and oil explorations. The Israeli EEZ covers an area of 25,950 sq. km. and reaches a maximum water depth of 2,100 m. It is located within the Levantine Basin, a zone of compression and strike-slip tectonics as Africa pushes into Eurasia. These forces operate on a half kilometer thick of Messinian evaporates and over a dozen kilometers of Pliocene and Pleistocene sediments to produce a complex seafloor morphology. The margin is cut by numerous slumps and canyons, while the basin is traversed by deep sea channels emptying into the moat around Eratosthenes Seamount farther north. The bathymetric and geomorphological mapping was done in three phases using Kongsberg and Elac multibeam sonars installed on different research vessels. The last phase (Aug.-Sept., 2016) covering depths from 1,400 to 2,100 m used the Kongsberg EM302 sonar installed on our new governmental research vessel Bat Galim. It has "state of the art" capabilities to map, sample and analyze the water column, seafloor and sub-bottom from water depths of 10m to 7,000 m. These mapping capabilities are unique in our region, the Eastern Mediterranean and the Red Sea, so we hope to promote research collaborations with our neighbors.

JAMSTEC multibeam surveys and submersible dives around the Hawaiian Islands: a collaborative Japan-USA exploration of Hawaii's deep seafloor

USGS Publications Warehouse

Robinson, Joel E.; Eakins, Barry W.; Kanamatsu, Toshiya; Naka, Jiro; Takahashi, Eiichi; Satake, Kenji; Smith, John R.; Clague, David A.; Yokose, Hisayoshi

2006-01-01

This database release, USGS Data Series 171, contains data collected during four Japan-USA collaborative cruises that characterize the seafloor around the Hawaiian Islands. The Japan Agency for Marine-Earth Science and Technology (JAMSTEC) sponsored cruises in 1998, 1999, 2001, and 2002, to build a greater understanding of the deep marine geology around the Hawaiian Islands. During these cruises, scientists surveyed over 600,000 square kilometers of the seafloor with a hull-mounted multibeam seafloor-mapping sonar system (SEA BEAM® 2112), observed the seafloor and collected samples using robotic and manned submersible dives, collected dredge and piston-core samples, and performed single-channel seismic surveys.

Geophysical Signatures of cold vents on the northern Cascadia margin

NASA Astrophysics Data System (ADS)

Riedel, M.; Paull, C. K.; Spence, G.; Hyndman, R. D.; Caress, D. W.; Thomas, H.; Lundsten, E.; Ussler, W.; Schwalenberg, K.

2009-12-01

The accretionary prism of the northern Cascadia margin is a classic gas hydrate research area. Ocean Drilling Program Leg 146 and Integrated Ocean Drilling Program (IODP) Expedition 311 documented that gas hydrate is widely distributed across the margin. In recent years an increased research focus has been on cold vents, where methane gas is actively released. Two recent expeditions funded by the Monterey Bay Aquarium Research Institute (MBARI) were conducted in the area of IODP Sites U1327 and U1328. An autonomous underwater vehicle (AUV) was used to map the seafloor bathymetry followed by dives with the ROV Doc Ricketts for ground truth information of various seafloor morphological features identified. The two cruises revealed many new seafloor features indicative of methane venting that were previously unknown. Bullseye Vent (BV) has been extensively studied using seismic imaging, piston coring, heat-flow, controlled-source EM, and deep drilling. BV is seismically defined by a circular wipe-out zone but the new AUV data show that BV is rather an elongated depression. BV is associated with a shoaling in the BSR, but lacks evidence for the existence of an underlying fault in the previous data. Although a massive gas-hydrate plug was encountered within the top 40 mbsf in the IODP holes, the ROV observations only revealed some platy methane derived carbonate outcrops at the outer-most rim of the depressions, a few beds of Vesicomya clams, and no observed gas vents, which together do not indicate that BV is especially active now. Further northeast of BV, but along the same trend, active gas venting was found associated with seafloor blistering and bacterial mats suggesting that there is an underlying fault system providing a fluid flow conduit. The newly discovered vent area has few seismic line crossings; however the available seismic data surprisingly are not associated with wipe-out zones. Another prominent fault-related gas vent also was investigated during the two MBARI expeditions in 2009 (Spinnaker Vent, SV). Seismic profiles over SV show blanking and a slight uplift of the BSR that underlies the vent-area. The seafloor morphological expressions (trending over ~400 m) are similar to the elongated series of depressions seen at BV, but SV overall appears more active and younger due to the presence of widespread chemosynthetic communities, methane bubbling, massive outcrops of methane-derived carbonate as well as seafloor gas-hydrate bearing mounds. The seafloor features at SV all follow a fault trend that is clearly seen on the AUV bathymetry map, as also suggested by the earlier seismic data. Together the new MBARI expeditions and previous studies show that the area investigated on the N. Cascadia margin is dominated by fluid escape features. At least 12 cold vents (7 with bubble-plumes) are now identified within an area of ~10 km2 making a re-evaluation of the methane hydrate and associated underlying fluid-flow regimes an important focus of future studies.

Using High-Resolution Swath Mapping Data and Other Underway Geophysical Measurements Collected during Transit Cruises of RV Isabu to Map Deep Sea Floor of the Pacific and Indian Oceans

NASA Astrophysics Data System (ADS)

Hong, G. H.; Lee, S. M.; Kim, D. J.; Lee, Y. H.; Kim, S. S.

2017-12-01

Detail images of the seafloor are often the first collection of clues that set one towards a path that leads to a new discovery. The mapping of unchartered seafloor is like exploring the surface of an unknown planet for the first time. The launch of new global-ocean-class RV Isabu operated by Korea Institute of Ocean Science and Technology (KIOST) in November 2016 has reinvigorated the ongoing open ocean research in Korea. The location of the KIOST research vessels can be found at http://www.kiost.net/. Here we present a new collaborative research and education program which utilizes onboard measurements taken during the transit cruises. The measurements include high-resolution swath mapping bathymetric data, underway geophysical measurements (3.5 kHz subbottom profile, sea surface gravity and magnetic field) which are gathered semi-automatically during a scientific operation. The acquisition of data alone is not sufficient for meaningful scientific knowledge as the initial measurements must be cleaned and processed during or after the cruise. As in any scientific endeavor, planning is important. Prior to the cruise, preliminary study will be carried out by carefully examining the previously collected data from various global databases. Whenever possible, a small offset will be made of the ship track lines crossing the region so that important new measurements can be obtained systematically over the years. We anticipate that the program will not only contribute to fill the gap in the high-resolution bathymetry in some part of the Indian Ocean and Pacific. The processed and analyzed data will be available to other scientific communities for further understanding via download from KIOST website.

California State Waters Map Series—Offshore of Santa Cruz, California

USGS Publications Warehouse

Cochrane, Guy R.; Dartnell, Peter; Johnson, Samuel Y.; Erdey, Mercedes D.; Golden, Nadine E.; Greene, H. Gary; Dieter, Bryan E.; Hartwell, Stephen R.; Ritchie, Andrew C.; Finlayson, David P.; Endris, Charles A.; Watt, Janet T.; Davenport, Clifton W.; Sliter, Ray W.; Maier, Katherine L.; Krigsman, Lisa M.; Cochrane, Guy R.; Cochran, Susan A.

2016-03-24

IntroductionIn 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology.The Offshore of Santa Cruz map area is located in central California, on the Pacific Coast about 98 km south of San Francisco. The city of Santa Cruz (population, about 63,000), the largest incorporated city in the map area and the county seat of Santa Cruz County, lies on uplifted marine terraces between the shoreline and the northwest-trending Santa Cruz Mountains, part of California’s Coast Ranges. All of California’s State Waters in the map area is part of the Monterey Bay National Marine Sanctuary.The map area is cut by an offshore section of the San Gregorio Fault Zone, and it lies about 20 kilometers southwest of the San Andreas Fault Zone. Regional folding and uplift along the coast has been attributed to a westward bend in the San Andreas Fault Zone and to right-lateral movement along the San Gregorio Fault Zone. Most of the coastal zone is characterized by low, rocky cliffs and sparse, small pocket beaches backed by low, terraced hills. Point Santa Cruz, which forms the north edge of Monterey Bay, provides protection for the beaches in the easternmost part of the map area by sheltering them from the predominantly northwesterly waves.The shelf in the map area is underlain by variable amounts (0 to 25 m) of upper Quaternary shelf, estuarine, and fluvial sediments deposited as sea level fluctuated in the late Pleistocene. The inner shelf is characterized by bedrock outcrops that have local thin sediment cover, the result of regional uplift, high wave energy, and limited sediment supply. The midshelf occupies part of an extensive, shore-parallel mud belt. The thickest sediment deposits, inferred to consist mainly of lowstand nearshore deposits, are found in the southeastern and northwestern parts of the map area.Coastal sediment transport in the map area is characterized by northwest-to-southeast littoral transport of sediment that is derived mainly from ephemeral streams in the Santa Cruz Mountains and also from local coastal-bluff erosion. During the last approximately 300 years, as much as 18 million cubic yards (14 million cubic meters) of sand-sized sediment has been eroded from the area between Año Nuevo Island and Point Año Nuevo and transported south; this mass of eroded sand is now enriching beaches in the map area. Sediment transport is within the Santa Cruz littoral cell, which terminates in the submarine Monterey Canyon.Benthic species observed in the Offshore of Santa Cruz map area are natives of the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, the eastern limb of the North Pacific subtropical gyre that flows from southern British Columbia to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 300 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off of central California has experienced a warming over the last 50 years that is driving an ecosystem shift away from the productive subarctic regime towards a depopulated subtropical environment.Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. The kelp beds are the northernmost known habitat for the population of southern sea otters. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

Repeat Mapping in the Lower Monterey Submarine Canyon Sheds Light on Morphological Change During Discrete Sediment Density Flow Events

NASA Astrophysics Data System (ADS)

Anderson, K.; Lundsten, E. M.; Caress, D. W.; Thomas, H. J.; Paull, C. K.; Maier, K. L.; Gales, J. A.; Gwiazda, R.; Talling, P.; Xu, J.; Parsons, D. R.

2017-12-01

The Coordinated Canyon Experiment (CCE), a multi-institutional collaboration effort, was designed to monitor the passage of sediment density flows along the axis of Monterey Canyon, offshore California, between 200 and 1850 m water depth. An array of moorings and sensors were deployed for three 6-month periods from October 2015 to April 2017. Aligned with the CCE deployments, repeat high-resolution multibeam bathymetric surveys of the Monterey Canyon floor were conducted with a mapping AUV (Autonomous Underwater Vehicle). The AUV carried a Reson 7125 multibeam echosounder (vertical precision of 0.15 m and horizontal resolution of 1.0 m). An inertial navigation system combined with a Doppler velocity logger allowed the AUV to fly pre-programmed grids at 3 knots, while maintaining an altitude of 50 m above the seafloor, to obtain a nominal line spacing of 130 m. The floor and lower flanks of the canyon between 200 to 540 m and 1350 to 1880 m water depths were mapped six times during the CCE. These repeat maps are subtracted to create bathymetry difference grids to show morphological change. Coupling the sensor observations with the bathymetric surveys, the CCE successfully documented sediment density flow events as well as the associated changes in seafloor morphology. Between repeat surveys, three sediment density flow events reached the lower canyon, extending to at least 1850 m water depth. On January 15, 2016, a particularly large density flow traveled more than 50 km down Monterey Canyon. Unlike in the upper canyon where this event caused wholesale reorganization of geomorphological features, changes to the lower canyon morphology involved a more moderate re-sculpting of the features. The effect of a sediment density flow of known magnitude and duration on the seafloor morphology has never been documented in a deep-sea setting before.

California State Waters Map Series: offshore of Coal Oil Point, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Golden, Nadine E.; Phillips, Eleyne L.; Ritchie, Andrew C.; Kvitek, Rikk G.; Dieter, Bryan E.; Conrad, James E.; Lorenson, T.D.; Krigsman, Lisa M.; Greene, H. Gary; Endris, Charles A.; Seitz, Gordon G.; Finlayson, David P.; Sliter, Ray W.; Wong, Florence L.; Erdey, Mercedes D.; Gutierrez, Carlos I.; Leifer, Ira; Yoklavich, Mary M.; Draut, Amy E.; Hart, Patrick E.; Hostettler, Frances D.; Peters, Kenneth E.; Kvenvolden, Keith A.; Rosenbauer, Robert J.; Fong, Grace; Johnson, Samuel Y.; Cochran, Susan A.

2014-01-01

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Coal Oil Point map area lies within the central Santa Barbara Channel region of the Southern California Bight. This geologically complex region forms a major biogeographic transition zone, separating the cold-temperate Oregonian province north of Point Conception from the warm-temperate California province to the south. The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and geodetic studies indicate that the region is presently undergoing north-south shortening. Uplift rates (as much as 2.0 mm/yr) that are based on studies of onland marine terraces provide further evidence of significant shortening. The cities of Goleta and Isla Vista, the main population centers in the map area, are in the western part of a contiguous urban area that extends eastward through Santa Barbara to Carpinteria. This urban area is on the south flank of the east-west-trending Santa Ynez Mountains, on coalescing alluvial fans and uplifted marine terraces underlain by folded and faulted Miocene bedrock. In the map area, the relatively low-relief, elevated coastal bajada narrows from about 2.5 km wide in the east to less than 500 m wide in the west. Several beaches line the actively utilized coastal zone, including Isla Vista County Park beach, Coal Oil Point Reserve, and Goleta Beach County Park. The beaches are subject to erosion each winter during storm-wave attack, and then they undergo gradual recovery or accretion during the more gentle wave climate of the late spring, summer, and fall months. The Offshore of Coal Oil Point map area lies in the central part of the Santa Barbara littoral cell, which is characterized by littoral drift to the east-southeast. Longshore drift rates have been reported to range from about 160,000 to 800,000 tons/yr, averaging 400,000 tons/yr. Sediment supply to the western and central parts of the littoral cell, including the map area, is largely from relatively small transverse coastal watersheds. Within the map area, these coastal watersheds include (from east to west) Las Llagas Canyon, Gato Canyon, Las Varas Canyon, Dos Pueblos Canyon, Eagle Canyon, Tecolote Canyon, Winchester Canyon, Ellwood Canyon, Glen Annie Canyon, and San Jose Creek. The Santa Ynez and Santa Maria Rivers, the mouths of which are about 100 to 140 km northwest of the map area, are not significant sediment sources because Point Conception and Point Arguello provide obstacles to downcoast sediment transport and also because much of their sediment load is trapped in dams. The Ventura and Santa Clara Rivers, the mouths of which are about 45 to 55 km southeast of the map area, are much larger sediment sources. Still farther east, eastward-moving sediment in the littoral cell is trapped by Hueneme and Mugu Canyons and then transported to the deep-water Santa Monica Basin. The offshore part of the map area consists of a relatively flat and shallow continental shelf, which dips gently seaward (about 0.8° to 1.0°) so that water depths at the shelf break, roughly coincident with the California’s State Waters limit, are about 90 m. This part of the Santa Barbara Channel is relatively well protected from large Pacific swells from the north and northwest by Point Conception and from the south and southwest by offshore islands and banks. The shelf is underlain by variable amounts of upper Quaternary marine and fluvial sediments deposited as sea level fluctuated in the late Pleistocene. The large (130 km2) Goleta landslide complex lies along the shelf break in the southern part of the map area. This compound slump complex may have been initiated more than 200,000 years ago, but it also includes three recent failures that may have been generated between 8,000 to 10,000 years ago. A local, 5- to 10-m-high tsunami may have been generated from these failure events. The map area has had a long history of hydrocarbon development, which began in 1928 with discovery of the Ellwood oil field. Subsequent discoveries in the offshore include South Ellwood offshore oil field, Coal Oil Point oil field, and Naples oil and gas field. Development of South Ellwood offshore field began in 1966 from platform “Holly,” the last platform to be installed in California’s State Waters. The area also is known for “the world’s most spectacular marine hydrocarbon seeps,” and large tar seeps are exposed on beaches east of the mouth of Goleta Slough. Offshore seeps adjacent to South Ellwood oil field release about 40 tons per day of methane and about 19 tons per day of ethane, propane, butane, and higher hydrocarbons. Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft sediment and isolated areas of rocky habitat that support kelp-forest communities nearshore and rocky-reef communities in deep water. The potential marine benthic habitat types mapped in the Offshore of Coal Oil Point map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats, which lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats, range from soft, unconsolidated sediment to hard sedimentary bedrock. This heterogeneous seafloor provides promising habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms.

Geology of the United States Seafloor: The View From GLORIA

NASA Astrophysics Data System (ADS)

Fulthorpe, Craig S.

When then-President Ronald Reagan signed into existence the 200-mile Exclusive Economic Zone (EEZ), the U.S. Geological Survey (USGS) was assigned the task of mapping this 13 million km2 area of seafloor, which exceeds the terrestrial area of the United States. Fortunately for scientists interested in the geology of continental margins, the USGS rose quickly to the challenge and took advantage of the unique opportunity offered by this political initiative. Mapping began in 1984, only a year after the proclamation.

MBARI Mapping AUV: A High-Resolution Deep Ocean Seafloor Mapping Capability

NASA Astrophysics Data System (ADS)

Caress, D. W.; Kirkwood, W. J.; Thomas, H.; McEwen, R.; Henthorn, R.; McGill, P.; Thompson, D.; Sibenac, M.; Jensen, S.; Shane, F.; Hamilton, A.

2005-05-01

The Monterey Bay Aquarium Research Institute (MBARI) is developing an autonomous seafloor mapping capability for deep ocean science applications. The MBARI Mapping AUV is a 0.53 m (21 in) diameter, 5.1 m (16.7 ft) long, Dorado-class vehicle designed to carry four mapping sonars. The primary sensor is a 200 kHz multibeam sonar producing swath bathymetry and sidescan. In addition, the vehicle carries 100 kHz and 410 kHz chirp sidescan sonars, and a 2-16 kHz sweep chirp subbottom profiler. Navigation and attitude data are obtained from an inertial navigation system (INS) incorporating a ring laser gyro and a 300 kHz Doppler velocity log (DVL). The vehicle also includes acoustic modem, ultra-short baseline navigation, and long-baseline navigation systems. The Mapping AUV is powered by 6 kWhr of Li-polymer batteries, providing expected mission duration of 12 hours at a typical speed of 1.5 m/s. All components of the vehicle are rated to 6000 m depth, allowing MBARI to conduct high-resolution mapping of the deep-ocean seafloor. The sonar package is also be mountable on ROV Ventana, allowing surveys at altitudes less than 20 m at topographically challenging sites. The vehicle was assembled and extensively tested during 2004; this year we are commencing operations for MBARI science projects while continuing the process of testing and integrating the complete suite of sensors and systems. MBARI is beginning to use this capability to observe the changing morphology of dynamic systems such as submarine canyons and active slumps, to map deep-water benthic habitats at resolutions comparable to ROV and submersible observations, to provide basemaps for ROV dives, and to provide high resolution bathymetry and subbottom profiles as part of a variety of projects requiring knowledge of the seafloor. We will present initial results from surveys in and around Monterey Canyon, including high resolution repeat surveys of four sites along the canyon axis.

A framework to quantify uncertainties of seafloor backscatter from swath mapping echosounders

NASA Astrophysics Data System (ADS)

Malik, Mashkoor; Lurton, Xavier; Mayer, Larry

2018-06-01

Multibeam echosounders (MBES) have become a widely used acoustic remote sensing tool to map and study the seafloor, providing co-located bathymetry and seafloor backscatter. Although the uncertainty associated with MBES-derived bathymetric data has been studied extensively, the question of backscatter uncertainty has been addressed only minimally and hinders the quantitative use of MBES seafloor backscatter. This paper explores approaches to identifying uncertainty sources associated with MBES-derived backscatter measurements. The major sources of uncertainty are catalogued and the magnitudes of their relative contributions to the backscatter uncertainty budget are evaluated. These major uncertainty sources include seafloor insonified area (1-3 dB), absorption coefficient (up to > 6 dB), random fluctuations in echo level (5.5 dB for a Rayleigh distribution), and sonar calibration (device dependent). The magnitudes of these uncertainty sources vary based on how these effects are compensated for during data acquisition and processing. Various cases (no compensation, partial compensation and full compensation) for seafloor insonified area, transmission losses and random fluctuations were modeled to estimate their uncertainties in different scenarios. Uncertainty related to the seafloor insonified area can be reduced significantly by accounting for seafloor slope during backscatter processing while transmission losses can be constrained by collecting full water column absorption coefficient profiles (temperature and salinity profiles). To reduce random fluctuations to below 1 dB, at least 20 samples are recommended to be used while computing mean values. The estimation of uncertainty in backscatter measurements is constrained by the fact that not all instrumental components are characterized and documented sufficiently for commercially available MBES. Further involvement from manufacturers in providing this essential information is critically required.

Repeat Mapping in Upper Monterey Canyon Captures the Effect of Sediment Transport Events of Known Magnitude and Duration on the Seafloor Morphology

NASA Astrophysics Data System (ADS)

Lundsten, E. M.; Anderson, K.; Caress, D. W.; Thomas, H. J.; Paull, C. K.; Maier, K. L.; Gwiazda, R.; Gales, J. A.; Talling, P.; Xu, J.; Parsons, D. R.

2017-12-01

As part of a multi-institution submarine canyon study, the Coordinated Canyon Experiment (CCE), high-resolution multibeam bathymetric surveys of the floor of Monterey Canyon, offshore California, were conducted to capture the changes in seafloor morphology directly related to the passage of sediment density flows documented during the study. The goals of this study were to monitor the passage of sediment density flows as they move through the axis of a submarine canyon in order to understand the velocity structure of these flows and to document the associated changes in seafloor morphology and the resultant deposits. The CCE consisted of an array of moorings and sensors deployed on the canyon floor during the 18-month period between October 2015 and April 2017. In addition, a mapping AUV (Autonomous Underwater Vehicle) repeatedly surveyed two sites along the canyon during the study. Differencing the repeat grids quantified the morphological changes directly related to specifically documented, individual flow events. The AUV carried a Reson 7125 multibeam echosounder (vertical precision of 0.15 m and horizontal resolution of 1.0 m). An inertial navigation system combined with a Doppler velocity logger allowed the AUV to fly pre-programmed grids at 3 knots while maintaining an altitude of 50 m above the seafloor and obtain a nominal line spacing of 130 m. The axial channel between 200 and 540 m water depth was surveyed six times. At least fifteen density flow events were captured by the array of CCE instruments within this AUV survey area. These events caused moorings as well as several large and small instruments to move down canyon significant distances at least 30 times. Difference grids show the canyon experienced erosion and deposition of up to +/- 3 m between surveys. The pair of surveys that straddle a sediment transport event on December 1, 2015 show the seafloor was altered only down to 420 m water depth, consistent with the observations on the CCE instrument array which showed the event dissipated at 400 m water depth. All difference grids show bathymetric changes are restricted to a very clearly defined 200 m wide swath along the axis of the canyon. This study highlights these changes in seafloor morphology in response to several sediment transport events of known extent, magnitude, and duration.

Archive of water gun subbottom data collected during USGS cruise SEAX 96004, New York Bight, 1 May - 9 June 1996

USGS Publications Warehouse

Hill, Jenna C.; Schwab, William C.; Foster, David S.

2000-01-01

Beginning in 1995, the USGS, in cooperation with the U.S Army Corps of Engineers (USACE), New York District, began a program to generate reconnaissance maps of the sea floor offshore of the New York-New Jersey metropolitan area, one of the most populated coastal regions of the United States. The goal of this mapping program is to provide a regional synthesis of the sea-floor environment, including a description of sedimentary environments, sediment texture, seafloor morphology, and geologic history to aid in understanding the impacts of anthropogenic activities, such as ocean dumping. This mapping effort differs from previous studies of this area by obtaining digital, sidescan sonar images that cover 100 percent of the sea floor.This investigation was motivated by the need to develop an environmentally acceptable solution for the disposal of dredged material from the New York - New Jersey Port, by the need to identify potential sources of sand for renourishment of the southern shore of Long island, and by the opportunity to develop a better understanding of the transport and long-term fate of contaminants by investigations of the present distribution of materials discharged into the New York Bight over the last 100+ years (Schwab and others, 1997). Data collected in 1996, USGS cruise SEAX 96004, augments data collected in 1995 with sidescan sonar and seismic reflection data collected within the New York Bight Apex region. This report is an archive of the water gun seismic reflection data collected in 1996.

Maps showing gas-hydrate distribution off the east coast of the United States

USGS Publications Warehouse

Dillon, William P.; Fehlhaber, Kristen L.; Coleman, Dwight F.; Lee, Myung W.; Hutchinson, Deborah R.

1995-01-01

These maps present the inferred distribution of natural-gas hydrate within the sediments of the eastern United States continental margin (Exclusive Economic Zone) in the offshore region from Georgia to New Jersey (fig. 1). The maps, which were created on the basis of seismic interpretations, represent the first attempt to map volume estimates for gas hydrate. Gas hydrate forms a large reservoir for methane in oceanic sediments. Therefore it potentially may represent a future source of energy and it may influence climate change because methane is a very effective greenhouse gas. Hydrate breakdown probably is a controlling factor for sea-floor landslides, and its presence has significant effect on the acoustic velocity of sea-floor sediments.

Mapping the Gaps: Building a pipeline for contributing and accessing crowdsourced bathymetry data

NASA Astrophysics Data System (ADS)

Rosenberg, A. M.; Jencks, J. H.; Robertson, E.; Reed, A.

2017-12-01

Both the Moon and Mars have been more comprehensively mapped than the Earth's oceans. Notably, less than 15% of the world's deep ocean and 50% of the world's coastal waters (<200m) have been measured directly. A knowledge of the depth and shape of the seafloor underpins the safe, sustainable, cost effective execution of almost every human activity that takes place at sea, yet most of the seafloor remains virtually unmapped, unobserved, and unexplored. Since 2014, the International Hydrographic Organization (IHO) has encouraged innovative supplementary data-gathering and data-maximizing initiatives to increase knowledge of the bathymetry of the seas, oceans and coastal waters including crowdsourced bathymetry (CSB). CSB can be used to identify areas where nautical charts are inadequate or applied to charts when the source and uncertainties of the data are well understood. The key to successful CSB efforts is volunteer observers who operate vessels-of-opportunity in places where charts are poor or where the seafloor is dynamic and hydrographic assets are not easily available. NOAA chairs the IHO CSB Working Group and hosts the IHO Data Centre for Digital Bathymetry (IHO DCDB) at NOAA's National Centers for Environmental Information (NCEI). NCEI has been working to enhance the infrastructure and interface of the DCDB to provide archiving, discovery, display and retrieval of CSB contributed from mariners around the world. NCEI, in partnership with NOAA's Office of Coast Survey and Rose Point Navigation Systems, established a citizen science pilot program in 2015 to harvest CSB from Electronic Navigation Systems. Today, data providers can submit xyz, csv, or geoJSON for automated ingest, while other formats can be accommodated with minimal system code changes. Like most marine geophysical datasets at NCEI, users can discover, filter, and request CSB data via a map viewer (https://maps.ngdc.noaa.gov/viewers/csb/). Now that the CSB pipeline has been established, NCEI has begun to plan future work that includes expanding the current infrastructure to account for increasing data volumes and implementing a point storage technology that would allow results to be dynamically generated and displayed through heat maps, while continuing to increase the number of data contributors to the IHO CSB initiative.

Mapping the EEZ

NASA Astrophysics Data System (ADS)

Richman, Barbara T.

A cooperative, multi-year program to map the largely uncharted Exclusive Economic Zone (EEZ), begun last month, has the potential for piggybacking scientific observations and research. On March 10, 1983, President Ronald Reagan proclaimed the mineral-rich zone as the area between the U.S. shoreline and 200 nautical miles outward. The United States has sovereign rights for exploration, exploitation, conservation, and management of all living and nonliving resources within the zone.The National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS) will cooperate in the project that will map an area nearly twice the area of U.S. land. USGS responsibilities include definition of seafloor geology and definition of geological processes and resources, including sand and gravel, placers, phosphorites, manganese nodules, cobalt crusts, and sulfides (Eos, March 20, 1984, p. 105). NOAA, meanwhile, will be surveying, mapping, analyzing resources, and managing fisheries.

Detailed surveys of the transform margin morphology in the Gulf of California

NASA Astrophysics Data System (ADS)

Anderson, K.; Lundsten, E.; Paull, C. K.; Caress, D. W.; Thomas, H.; Gwiazda, R.; Herguera, J.; McGann, M. L.; Edwards, B. D.; Hinojosa, A.; Mejia Mercado, B.; Sanchez, A.; Conlin, D.; Thompson, D.

2012-12-01

The Monterey Bay Aquarium Research Institute (MBARI) conducted detailed surveys of the seafloor morphology at nine representative sections of the North American - Pacific Plate boundary on the floor of the Gulf of California during a two-ship expedition in March and April 2012. One of the objectives of this program was to better understand how the fault is manifested on the seafloor and whether any secondary deformation adjacent to the fault can be observed. An autonomous underwater vehicle (AUV) provided detailed bathymetry of the seafloor, and a remotely operated vehicle (ROV) allowed ground-truth observations and sampling of the surveyed area. The AUV surveys provide high-resolution multibeam bathymetry with a vertical precision of 0.15 m, horizontal resolution of 1.0 and 2-10 kHz CHIRP seismic reflection profiles. Each of the surveys covered ~ 14 km2 areas and were spread out over 400 m, between water depths of 350 and 2800 m and separated by three seafloor spreading centers. The bathymetry shows the morphology of these fault zones in unprecedented detail. The maps allowed the active fault trace to be located so that it could be inspected and the seafloor sampled during ROV dives. The bathymetry from a representative survey on the southern side of the Guaymas Basin shows an obvious NW-SE lineation, only a few meters wide, formed by distinct scarps and/or troughs on the seafloor, and inferred to be the trace of the active fault. CHIRP profiles show offsets in reflecting horizons extend to the modern seafloor, further supporting the concept that these lineations are the trace of the active fault. This survey is unique in that an extensive section of the seafloor and near subsurface contains a wave-like fabric that only occurs on the North American side of the fault, with crests that run ~ E-W, characteristically ~ 3 m in amplitude and ~ 100 in wavelength. Ultimately, whether this fabric is a result of a depositional process or structural deformation associated with the regional tectonics is unclear. However, this was the only morphology observed that suggests secondary deformation.

High-resolution multibeam bathymetry of East and West Flower Gardens and Stetson Banks, Gulf of Mexico

USGS Publications Warehouse

Gardner, J.V.; Mayer, L.A.; Hughes, Clarke J.E.; Kleiner, A.

1998-01-01

The 1990s have seen rapid advances in seafloor mapping technology. Multibeam sonars are now capable of mapping a wide range of water depths with beams as narrow as 1??, and provide up to a 150?? swath. When these multibeam sonars are coupled with an extremely accurate vehicle motion sensor and very precise navigation, they are capable of producing unprecedented images of the seafloor. This technology was used in December 1997 to map the East and West Flower Gardens and Stetson Banks, Gulf of Mexico. The results from this survey provide the most accurate maps of these areas yet produced and reveal features at submeter resolution never mapped in these areas before. The digital data provide a database that should become the fundamental base maps for all subsequent work in this recently established National Marine Sanctuary.

What's New in the Ocean in Google Earth and Maps

NASA Astrophysics Data System (ADS)

Austin, J.; Sandwell, D. T.

2014-12-01

Jenifer Austin, Jamie Adams, Kurt Schwehr, Brian Sullivan, David Sandwell2, Walter Smith3, Vicki Ferrini4, and Barry Eakins5, 1 Google Inc., 1600 Amphitheatre Parkway, Mountain View, California, USA 2 University of California-San Diego, Scripps Institute of Oceanography, La Jolla, California ,USA3 NOAA Laboratory for Satellite Altimetry, College Park, Maryland, USA4 Lamont Doherty, Columbia University5 NOAAMore than two-thirds of Earth is covered by oceans. On the almost 6 year anniversary of launching an explorable ocean seafloor in Google Earth and Maps, we updated our global underwater terrain dataset in partnership with Lamont-Doherty at Columbia, the Scripps Institution of Oceanography, and NOAA. With this update to our ocean map, we'll reveal an additional 2% of the ocean in high resolution representing 2 years of work by Columbia, pulling in data from numerous institutions including the Campeche Escarpment in the Gulf of Mexico in partnership with Charlie Paul at MBARI and the Schmidt Ocean Institute. The Scripps Institution of Oceanography at UCSD has curated 30 years of data from more than 8,000 ship cruises and 135 different institutions to reveal 15 percent of the seafloor at 1 km resolution. In addition, explore new data from an automated pipeline built to make updates to our Ocean Map more scalable in partnership with NOAA's National Geophysical Data Center (link to http://www.ngdc.noaa.gov/mgg/bathymetry/) and the University of Colorado CIRES program (link to http://cires.colorado.edu/index.html).

Multisource multibeam backscatter data: developing a strategy for the production of benthic habitat maps using semi-automated seafloor classification methods

NASA Astrophysics Data System (ADS)

Lacharité, Myriam; Brown, Craig J.; Gazzola, Vicki

2018-06-01

The establishment of multibeam echosounders (MBES) as a mainstream tool in ocean mapping has facilitated integrative approaches towards nautical charting, benthic habitat mapping, and seafloor geotechnical surveys. The bathymetric and backscatter information generated by MBES enables marine scientists to present highly accurate bathymetric data with a spatial resolution closely matching that of terrestrial mapping, and can generate customized thematic seafloor maps to meet multiple ocean management needs. However, when a variety of MBES systems are used, the creation of objective habitat maps can be hindered by the lack of backscatter calibration, due for example, to system-specific settings, yielding relative rather than absolute values. Here, we describe an approach using object-based image analysis to combine 4 non-overlapping and uncalibrated (backscatter) MBES coverages to form a seamless habitat map on St. Anns Bank (Atlantic Canada), a marine protected area hosting a diversity of benthic habitats. The benthoscape map was produced by analysing each coverage independently with supervised classification (k-nearest neighbor) of image-objects based on a common suite of 7 benthoscapes (determined with 4214 ground-truthing photographs at 61 stations, and characterized with backscatter, bathymetry, and bathymetric position index). Manual re-classification based on uncertainty in membership values to individual classes—especially at the boundaries between coverages—was used to build the final benthoscape map. Given the costs and scarcity of MBES surveys in offshore marine ecosystems—particularly in large ecosystems in need of adequate conservation strategies, such as in Canadian waters—developing approaches to synthesize multiple datasets to meet management needs is warranted.

California State Waters Map Series—Offshore of Gaviota, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Hartwell, Stephen R.; Golden, Nadine E.; Kvitek, Rikk G.; Davenport, Clifton W.; Johnson, Samuel Y.; Cochran, Susan A.

2018-04-20

IntroductionIn 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology.The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and the region is presently undergoing north-south shortening. The offshore part of the map area lies south of the steep south flank of the Santa Ynez Mountains. The crest of the range, which has a maximum elevation of about 760 m in the map area, lies about 4 km north of the shoreline.Gaviota is an unincorporated community that has a sparse population (less than 100), and the coastal zone is largely open space that is locally used for cattle grazing. The Union Pacific railroad tracks extend westward along the coast through the entire map area, within a few hundred meters of the shoreline. Highway 101 crosses the eastern part of the map area, also along the coast, then turns north (inland) and travels through Cañada de la Gaviota and Gaviota Pass en route to Buellton. Gaviota State Park lies at the mouth of Cañada de la Gaviota. West of Gaviota, the onland coastal zone is occupied by the Hollister Ranch, a privately owned, gated community that has no public access.The map area has a long history of petroleum exploration and development. Several offshore gas fields were discovered and were developed by onshore directional drilling in the 1950s and 1960s. Three offshore petroleum platforms were installed in adjacent federal waters in 1976 (platform “Honda”) and 1989 (platforms “Heritage” and “Harmony”). Local offshore and onshore operations were serviced for more than a century by the Gaviota marine terminal, which is currently being decommissioned and will be abandoned in an intended transition to public open space. The Offshore of Gaviota map area lies within the western Santa Barbara Channel region of the Southern California Bight, and it is somewhat protected from large Pacific swells from the north and northwest by Point Conception and from south and southwest swells by offshore islands and banks. Much of the shoreline in the map area is characterized by narrow beaches that have thin sediment cover, backed by low (10- to 20-m-high) cliffs that are capped by a narrow coastal terrace. Beaches are subject to wave erosion during winter storms, followed by gradual sediment recovery or accretion in the late spring, summer, and fall months during the gentler wave climate.The map area lies in the western-central part of the Santa Barbara littoral cell, which is characterized by west-to-east transport of sediment from Point Arguello on the northwest to Hueneme and Mugu Canyons on the southeast. Sediment supply to the western and central part of the littoral cell is mainly from relatively small coastal watersheds. In the map area, sediment sources include Cañada de la Gaviota (52 km2), as well as Cañada de la Llegua, Arroyo el Bulito, Cañada de Santa Anita, Cañada de Alegria, Cañada del Agua Caliente, Cañada del Barro, Cañada del Leon, Cañada San Onofre, and many others. Coastal-watershed discharge and sediment load are highly variable, characterized by brief large events during major winter storms and long periods of low (or no) flow and minimal sediment load between storms. In recent (recorded) history, the majority of high-discharge, high-sediment-flux events have been associated with El Niño phases of the El Niño–Southern Oscillation climatic pattern.Shelf width in the Offshore of Gaviota map area ranges from about 4.3 to 4.7 km, and shelf slopes average about 1.0° to 1.2° but are highly variable because of the presence of the large Gaviota sediment bar. This bar extends southwestward for about 9 km from the mouth of Cañada de la Gaviota to the shelf break, is as wide as 2 km, and is by far the largest shore-attached sediment bar in the Santa Barbara Channel. The shelf is underlain by bedrock and variable amounts (0 to as much as 36 m in the Gaviota bar) of upper Quaternary sediments deposited as sea level fluctuated in the late Pleistocene. The trend of the shelf break changes from about 276° to 236° azimuth over a distance of about 12 km, and it ranges in depth from about 91 m to as shallow as 62 to 73 m where significant shelf-break and upper-slope failure and landsliding has apparently occurred. The shelf break in the western part of the map area is notably embayed by the heads of three large (150- to 300-m-wide) channels that have been referred to as “the Gaviota Canyons” or as “Drake Canyon,” “Sacate Canyon,” and “Alegria Canyon.”Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft, unconsolidated sediment interspersed with isolated areas of rocky habitat that support kelp-forest communities in the nearshore and rocky-reef communities in deeper water. The potential marine benthic habitat types mapped in the Offshore of Gaviota map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats. The fairly homogeneous seafloor of sediment and low-relief bedrock provides characteristic habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms. Several areas of smooth sediment form nearshore terraces that have relatively steep, smooth fronts, which may be attractive to groundfish. Below the steep shelf break, soft, unconsolidated sediment is interrupted by the heads of several submarine canyons and rills, some bedrock exposures, and small carbonate mounds associated with asphalt mounds and pockmarks, also good potential habitat for rockfish. The map area includes the relatively small (5.2 km2) Kashtayit State Marine Conservation Area, which largely occupies the inner part of the Gaviota sediment bar.

Mapping the Arctic: Online Undergraduate Education Using Scientific Research in International Policy

NASA Astrophysics Data System (ADS)

Reed, D. L.; Edwards, B. D.; Gibbons, H.

2011-12-01

Ocean science education has the opportunity to span traditional academic disciplines and undergraduate curricula because of its interdisciplinary approach to address contemporary issues on a global scale. Here we report one such opportunity, which involves the development of a virtual oceanographic expedition to map the seafloor in the Arctic Ocean for use in the online Global Studies program at San Jose State University. The U.S. Extended Continental Shelf Project provides an extensive online resource to follow the activities of the third joint U.S. and Canada expedition in the Arctic Ocean, the 2010 Extended Continental Shelf survey, involving the icebreakers USCGC Healy and CCGS Louis S. St-Laurent. In the virtual expedition, students join the work of scientists from the U.S. Geological Survey and the Canadian Geological Survey by working through 21 linked web pages that combine text, audio, video, animations and graphics to first learn about the U.N. Convention on the Law of the Sea (UNCLOS). Then, students gain insight into the complexity of science and policy interactions by relating the UNCLOS to issues in the Arctic Ocean, now increasingly accessible to exploration and development as a result of climate change. By participating on the virtual expedition, students learn the criteria contained in Article 76 of UNCLOS that are used to define the extended continental shelf and the scientific methods used to visualize the seafloor in three-dimensions. In addition to experiencing life at sea aboard a research vessel, at least virtually, students begin to interpret the meaning of seafloor features and the use of seafloor sediment samples to understand the application of ocean science to international issues, such as the implications of climate change, national sovereign rights as defined by the UNCLOS, and marine resources. The virtual expedition demonstrates that ocean science education can extend beyond traditional geoscience courses by taking advantage of emerging academic disciplines, contemporary global issues and new learning delivery systems.

Polar continental margins: Studies off East Greenland

NASA Astrophysics Data System (ADS)

Mienert, J.; Thiede, J.; Kenyon, N. H.; Hollender, F.-J.

The passive continental margin off east Greenland has been shaped by tectonic and sedimentary processes, and typical physiographic patterns have evolved over the past few million years under the influence of the late Cenozoic Northern Hemisphere glaciations. The Greenland ice shield has been particularly affected.GLORIA (Geological Long Range Inclined Asdic), the Institute of Oceanographic Sciences' (IOS) long-range, side-scan sonar, was used on a 1992 RV Livonia cruise to map large-scale changes in sedimentary patterns along the east Greenland continental margin. The overall objective of this research program was to determine the variety of large-scale seafloor processes to improve our understanding of the interaction between ice sheets, current regimes, and sedimentary processes. In cooperation with IOS and the RV Livonia, a high-quality set of seafloor data has been produced. GLORIA'S first survey of east Greenland's continental margin covered several 1000- × 50-km-wide swaths (Figure 1) and yielded an impressive sidescan sonar image of the complete Greenland Basin and margin (about 250,000 km2). A mosaic of the data was made at a scale of 1:375,000. The base map was prepared with a polar stereographic projection having a standard parallel of 71°.

Seafloor geology and benthic habitats, San Pedro Shelf, southern California

USGS Publications Warehouse

Wong, Florence L.; Dartnell, Peter; Edwards, Brian D.; Phillips, Eleyne L.

2012-01-01

Seafloor samples, videography, still photography, and real-time descriptions of geologic and biologic constituents at or near the seafloor of the San Pedro Shelf, southern California, advance the study of natural and man-made processes on this coastal area off the metropolitan Los Angeles area. Multibeam echo-sounder data collected by the U.S. Geological Survey in 1998 and 1999 guided sampling and camera work in 2004 resulting in a new seafloor character map that shows possible benthic habitats in much higher resolution (4- and 16-m pixels) than previously available. The seafloor is characterized by primarily muddy sand and sand with outcrops of Miocene and Pliocene bedrock along the Palos Verdes Fault Zone. Observed benthic populations indicate low abiotic complexity, low biotic complexity, and low biotic coverage. The data are provided for use in geographic information systems (GIS).

California State Waters Map Series: offshore of Pacifica, California

USGS Publications Warehouse

Edwards, Brian D.; Phillips, Eleyne L.; Dartnell, Peter; Greene, H. Gary; Bretz, Carrie K.; Kvitek, Rikk G.; Hartwell, Stephen R.; Johnson, Samuel Y.; Cochrane, Guy R.; Dieter, Bryan E.; Sliter, Ray W.; Ross, Stephanie L.; Golden, Nadine E.; Watt, Janet Tilden; Chinn, John L.; Erdey, Mercedes D.; Krigsman, Lisa M.; Manson, Michael W.; Endris, Charles A.; Cochran, Susan A.; Edwards, Brian D.

2015-01-01

The continental shelf in the map area is about 40 km wide, with water depths at the shelf break that range from about 80 to 120 m. Within California’s State Waters, the midshelf to inner shelf areas are characterized by a relatively flat, shallow (water depths of as much as 44 m) seafloor that dips gently (about 0.2° to 0.3°) westward. The seafloor is composed primarily of unconsolidated Holocene sediment (marine deposits), as well as some nearshore bedrock outcrops that consist primarily of rocks of the Tertiary Purisima Formation and also Cretaceous plutonic rocks (granite or granodiorite).

California State Waters Map Series: offshore of Refugio Beach, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Golden, Nadine E.; Phillips, Eleyne L.; Ritchie, Andrew C.; Krigsman, Lisa M.; Dieter, Bryan E.; Conrad, James E.; Greene, H. Gary; Seitz, Gordon G.; Endris, Charles A.; Sliter, Ray W.; Wong, Florence L.; Erdey, Mercedes D.; Gutierrez, Carlos I.; Yoklavich, Mary M.; East, Amy E.; Hart, Patrick E.; Johnson, Samuel Y.; Cochran, Susan A.

2015-01-01

Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft, unconsolidated sediment interspersed with isolated areas of rocky habitat that support kelp-forest communities nearshore and rocky-reef communities in deep water. The potential marine benthic habitat types mapped in the Offshore of Refugio Beach map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats, which lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats, primarily are composed of soft sediment interrupted by a few carbonate mounds. This homogeneous seafloor of sediment and low-relief bedrock provides promising habitat for groundfish, crabs, shrimp, and other marine benthic organisms.

A Shark's Eye View of the Ocean Floor: Integration of Oceanographic Research with Educational Outreach

NASA Astrophysics Data System (ADS)

Moser, K.; Harpp, K. S.; Ketchum, J. T.; Espinoza, E.; Penaherrera, C.; Banks, S.; Fornari, D. J.; Geist, D.; Mittelstaedt, E. L.; R/v Melville Mv1007 Flamingo Cruise Scientific Party

2010-12-01

We have developed an interdisciplinary outreach program in which students will use the geological findings of the recent R/V Melville MV1007 Cruise to answer important questions in the Galápagos Archipelago. The cruise surveyed the seafloor between the Galápagos Platform and the Galápagos Spreading Center. Data collected from this cruise include observations using remote mapping instruments (MR1 sidescan sonar, EM122 multibeam bathymetry, and towed digital camera), dredged rock samples, gravity data, and magnetic data. The primary goal of this expedition was to gain a better understanding of the magmatic and volcanic processes that form the Galápagos seamounts and islands as well as provide information about the interaction between mantle plumes and mid-ocean ridges. The designed outreach program is intended to improve the integration of education and research by making our recent research findings understandable to students and others outside the field. The final product is an interdisciplinary, web-based resource accessible to the general public but targeted specifically for high school students enrolled in earth science courses. This resource begins by using a series of hands-on exploratory exercises to teach students about the origin of the geological features in the study area, with a focus on seamounts and submarine volcanism. Fundamental geoscience skills addressed in the curricular materials include using latitude and longitude, reading geologic maps and interpreting images of the seafloor, and calculating seafloor spreading rates, among others. Through a sequence of increasingly sophisticated exercises grounded in Bloom’s Taxonomy of Learning, students practice their skills by interpreting bathymetric maps, exploring the distribution of submarine volcanism in the Galápagos, and investigating plume-ridge interaction. Students use these geological concepts to address important biological questions in the Galápagos, primarily the distribution of marine organisms around the seamounts. Ultimately, students develop hypotheses for how the seamounts formed and how they affect the ecosystem around them, with a focus on the sharks that inhabit these waters. One of the learning tools is a virtual flyover movie of the Galápagos seafloor from a shark’s eye view that integrates our new bathymetric data with the recently documented migratory paths of tagged sharks. A primary goal is to develop a blueprint for a versatile educational resource that encourages students to explore new research results and use them as a context for developing critical skills. Equally important, this project serves as a model for collaboration with local scientists and teachers to integrate educational efforts with new research results and for its interdisciplinary focus on issues of both global and local importance.

Characterization of Sedimentary Deposits Using usSEABED for Large-scale Mapping, Modeling and Research of U.S.Continental Margins

NASA Astrophysics Data System (ADS)

Williams, S. J.; Reid, J. A.; Arsenault, M. A.; Jenkins, C.

2006-12-01

Geologic maps of offshore areas containing detailed morphologic features and sediment character can serve many scientific and operational purposes. Such maps have been lacking, but recent computer technology and software to capture diverse marine data are offering promise. Continental margins, products of complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression, contain landforms which provide a variety of important functions: critical habitats for fish, ship navigation, national defense, and engineering activities (i.e., oil and gas platforms, pipeline and cable routes, wind-energy sites) and contain important sedimentary records. Some shelf areas also contain sedimentary deposits such as sand and gravel, regarded as potential aggregate resources for mitigating coastal erosion, reducing vulnerability to hazards, and restoring ecosystems. Because coastal and offshore areas are increasingly important, knowledge of the framework geology and marine processes is useful to many. Especially valuable are comprehensive and integrated digital databases based on data from original sources in the marine community. Products of interest are GIS maps containing thematic information such as seafloor physiography, geology, sediment character and texture, seafloor roughness, and geotechnical engineering properties. These map products are useful to scientists modeling nearshore and shelf processes as well as planners and managers. The USGS with partners is leading a Nation-wide program to gather a wide variety of extant marine geologic data into the usSEABED system (http://walrus.wr.usgs/usseabed). This provides a centralized, fully integrated digital database of marine geologic data collected over the past 50 years by USGS, other federal and state agencies, universities and private companies. To date, approximately 325,000 data points from the U.S. EEZ reside in usSEABED. The usSEABED, which combines a broad array of physical data and information (both analytical and descriptive) about the sea floor, including sediment textural, statistical, geochemical, geophysical, and compositional information, is available to the marine community through USGS Data Series publications. Three DS reports for the Atlantic (DS-118), Gulf of Mexico (DS-146) and Pacific(DS-182) were published in 2006 and reports for HI and AK are forthcoming. The use of usSEABED and derivative map products are part of ongoing USGS efforts to conduct regional assessments of potential marine sand and gravel resources, map benthic habitats, and support research in understanding seafloor character and mobility, transport processes and natural resources.

Satellite Derived Seafloor Bathymetry and Habitat Mapping on a Shallow Carbonate Platform: Campeche Bank, México.

NASA Astrophysics Data System (ADS)

Garza-Perez, J. R.; Rankey, E. C.; Rodriguez-Vázquez, R. A.; Naranjo-Garcia, M. J.

2017-12-01

Extensive and consistent high-resolution seafloor mapping is a difficult task involving important financial resources, intensive field work and careful planning; thus there is a paucity of this type of mapping products both in spatial distribution and through time. Remote sensed imagery has supported continuous mapping efforts elsewhere, but extensive seafloor mapping, even in shallow regions keeps being elusive. Challenges to this effort include cloud cover, surface sun-glint, and water turbidity caused by sediment resuspension and primary productivity. Nevertheless, using high-quality satellite imagery (Landsat-8 OLI -30x30m/pixel- and GeoEye-1 -2x2m/pixel) and rigorous pre-processing (atmospheric correction, de-glinting and water-column light extinction compensation), resulting data contribute towards the advancement of seafloor mapping. The Yucatan Peninsula in México is a carbonate ramp devoid of significant orographic features and surface water bodies. Its submerged portion is the Campeche Bank, gently sloping towards the Gulf of Mexico. The bottom features several distinct blankets composed by medium-fine sediment (dominated by pelecypods, gastropods, foraminifera, lithoclasts, calcareous peloids and algal nodules, Halimeda plaques and coralline algae fragments), and a reef unit with several bank-type coral reefs. Outside the coral reefs, biotic cover down to 20 m deep is dominated by macroalgae (red, brown, green), coralline and filamentous algae with sharp seasonal changes in abundance, from almost nil during north-winds (Oct. - Jan.) to high during dry (Feb.- May) and rainy seasons (Jun. - Sept.), with changes of dominance by algae groups between dry and rainy seasons. This bloom is favored by increases in sunlight and nutrients carried by the Caribbean current upwelling washing the Campeche Bank. Beyond 20 m depth, sandy plains dominate the seascape. Corals, octocorals, sponges and tunicates are spatially restricted to bottoms with thin layers of sediment where limestone pavement or low complexity outcrops provide grounds for sessile biota settlement. These areas provide refuge and have high fish abundance and biomass as well as biodiversity including several economic important species, and mapping products support the decision making process for fisheries management.

Sea-floor morphology and sedimentary environments in southern Narragansett Bay, Rhode Island

USGS Publications Warehouse

McMullen, Katherine Y.; Poppe, Lawrence J.; Blackwood, Dann S.; Nardi, Matthew J.; Andring, Matthew A.

2015-09-09

Multibeam echosounder data collected by the National Oceanic and Atmospheric Administration along with sediment samples and still and video photography of the sea floor collected by the U.S. Geological Survey were used to interpret sea-floor features and sedimentary environments in southern Narragansett Bay, Rhode Island, as part of a long-term effort to map the sea floor along the northeastern coast of the United States. Sea-floor features include rocky areas and scour depressions in high-energy environments characterized by erosion or nondeposition, and sand waves and megaripples in environments characterized by coarse-grained bedload transport. Two shipwrecks are also located in the study area. Much of the sea floor is relatively featureless within the resolution of the multibeam data; sedimentary environments in these areas are characterized by processes associated with sorting and reworking. This report releases bathymetric data from the multibeam echosounder, grain-size analyses of sediment samples, and photographs of the sea floor and interpretations of the sea-floor features and sedimentary environments. It provides base maps that can be used for resource management and studies of topics such as benthic ecology, contaminant inventories, and sediment transport.

Coastal Seabed Mapping with Hyperspectral and Lidar data

NASA Astrophysics Data System (ADS)

Taramelli, A.; Valentini, E.; Filipponi, F.; Cappucci, S.

2017-12-01

A synoptic view of the coastal seascape and its dynamics needs a quantitative ability to dissect different components over the complexity of the seafloor where a mixture of geo - biological facies determines geomorphological features and their coverage. The present study uses an analytical approach that takes advantage of a multidimensional model to integrate different data sources from airborne Hyperspectral and LiDAR remote sensing and in situ measurements to detect antropogenic features and ecological `tipping points' in coastal seafloors. The proposed approach has the ability to generate coastal seabed maps using: 1) a multidimensional dataset to account for radiometric and morphological properties of waters and the seafloor; 2) a field spectral library to assimilate the high environmental variability into the multidimensional model; 3) a final classification scheme to represent the spatial gradients in the seafloor. The spatial pattern of the response to anthropogenic forcing may be indistinguishable from patterns of natural variability. It is argued that this novel approach to define tipping points following anthropogenic impacts could be most valuable in the management of natural resources and the economic development of coastal areas worldwide. Examples are reported from different sites of the Mediterranean Sea, both from Marine Protected and un-Protected Areas.

Detailed seafloor habitat mapping to enhance marine-resource management

USGS Publications Warehouse

Zawada, David G.; Hart, Kristen M.

2010-01-01

Pictures of the seafloor capture important information about the sediments, exposed geologic features, submerged aquatic vegetation, and animals found in a given habitat. With the emergence of marine protected areas (MPAs) as a favored tactic for preserving coral reef resources, knowledge of essential habitat components is paramount to designing effective management strategies. Surprisingly, detailed information on seafloor habitat components is not available in many areas that are being considered for MPA designation or that are already designated as MPAs. A task of the U.S. Geological Survey Coral Reef Ecosystem STudies (USGS CREST) project is addressing this issue.

California State Waters Map Series—Monterey Canyon and vicinity, California

USGS Publications Warehouse

Dartnell, Peter; Maier, Katherine L.; Erdey, Mercedes D.; Dieter, Bryan E.; Golden, Nadine E.; Johnson, Samuel Y.; Hartwell, Stephen R.; Cochrane, Guy R.; Ritchie, Andrew C.; Finlayson, David P.; Kvitek, Rikk G.; Sliter, Ray W.; Greene, H. Gary; Davenport, Clifton W.; Endris, Charles A.; Krigsman, Lisa M.; Dartnell, Peter; Cochran, Susan A.

2016-06-10

IntroductionIn 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath bathymetry data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology.The Monterey Canyon and Vicinity map area lies within Monterey Bay in central California. Monterey Bay is one of the largest embayments along the west coast of the United States, spanning 36 km from its northern to southern tips (in Santa Cruz and Monterey, respectively) and 20 km along its central axis. Not only does it contain one of the broadest sections of continental shelf along California’s coast, it also contains Monterey Canyon, one of the largest and deepest submarine canyons in the world. Note that the California’s State Waters limit extends farther offshore between Santa Cruz and Monterey so that it encompasses all of Monterey Bay.The coastal area within the map area is lightly populated. The community of Moss Landing (population, 204) hosts the largest commercial fishing fleet in Monterey Bay in its harbor. The map area also includes parts of the cities of Marina (population, about 20,000) and Castroville (population, about 6,500). Fertile lowlands of the Salinas River and Pajaro River valleys largely occupy the inland part of the map area, and land use is primarily agricultural.The offshore part of the map area lies completely within the Monterey Bay National Marine Sanctuary. The map area also includes Portuguese Ledge and Soquel Canyon State Marine Conservation Areas. Designated conservation and (or) recreation areas in the onshore part of the map area include Salinas River National Wildlife Refuge, Elkhorn Slough State Marine Conservation Area, Elkhorn Slough State Marine Reserve, Moss Landing Wildlife Area, Zmudowski and Salinas River State Beaches, and Marina Dunes Preserve.Monterey Bay, a geologically complex area within a tectonically active continental margin, lies between two major, converging strike-slip faults. The northwest-striking San Andreas Fault lies about 34 km east of Monterey Bay; this section of the fault ruptured in both the 1989 M6.9 Loma Prieta earthquake and the 1906 M7.8 great California earthquake. The northwest-striking San Gregorio Fault crosses Monterey Canyon west of Monterey Bay. Between these two regional faults, strain is accommodated by the northwest-striking Monterey Bay Fault Zone. Deformation associated with these major regional faults and related structures has resulted in uplift of the Santa Cruz Mountains, as well as the granitic highlands of the Monterey peninsula.Monterey Canyon begins in the nearshore area directly offshore of Moss Landing and Elkhorn Slough, and it can be traced for more than 400 km seaward, out to water depths of more than 4,000 m. Within the map area, the canyon can be traced for about 42 km to a water depth of about 1,520 m. The head of the canyon consists of three branches that begin about 150 m offshore of Moss Landing Harbor. At 500 m offshore, the canyon is already 70 m deep and 750 m wide. Large sand waves, which have heights from 1 to 3 m and wavelengths of about 50 m, are present along the channel axis in the upper 4 km of the canyon.Soquel Canyon is the most prominent tributary of Monterey Canyon within the map area. The head of Soquel Canyon is isolated from coastal watersheds and, thus, is considered inactive as a conduit for coarse sediment transport.North and south of Monterey and Soquel Canyons, the relatively flat continental shelf contains only a few rocky outcrop exposures. Bedrock is covered largely by sediment derived from the Salinas and Pajaro Rivers. North of Monterey Canyon, the broad and flat continental shelf dips gently seaward, to water depths of about 95 m. To the south, the shelf also dips slightly, to water depths of as much as 150 m along the canyon edge.In the map area, Monterey Canyon splits the Santa Cruz littoral cell (north of the canyon) and the southern Monterey littoral cell (south of the canyon). It is estimated that about 400,000 m3/yr of sand on average enters Monterey Canyon from both of these littoral cells.In the Santa Cruz littoral cell, sand generally travels east and south. Sand is supplied through sea cliff erosion, as well as from the San Lorenzo River, the Pajaro River, and several other smaller coastal watersheds. About 152,911 m3/yr of sand is dredged from the entrance channel of the Santa Cruz Small Craft Harbor north of the map area and then placed on beaches to the east (downdrift) of it. This sand feeds the beaches in the southeastern reach of the Santa Cruz littoral cell and (or) is eventually trapped and lost by Monterey Canyon.The southern Monterey Bay littoral cell in the map area consists of two subcells. From the head of Monterey Canyon to the Salinas River, littoral drift is dominantly to the north; sand entering the ocean from the Salinas River either is deposited offshore or travels north in the littoral zone, nourishing the beaches until it is transported down Monterey Canyon. From south of the Salinas River to the southern extent of the map area, coastal sediment is moved mainly to the south; dune erosion is the only significant source of sand in this subcell.

Acoustic Seafloor Classification near the Duanqiao hydrothermal field at the Southwest Indian Ridge from Multibeam Backscatter Data

NASA Astrophysics Data System (ADS)

Wang, A.; Tao, C.; Xu, Y.; Zhang, G.; Liao, S.

2016-12-01

The inactive Duanqiao hydrothermal field is located on the 50.5°E SWIR axial high with a shallow depth of about 1700 meters. Seafloor morphology of the area surrounding the field is relatively flat, which exerts less influence on multibeam backscatter data than rugged terrains do. Therefore, it is an ideal experimental area to conduct seafloor classification utilizing multibeam sonar. This paper dealt with a backscatter analysis of Simrad EM120 multibeam sonar data, acquired during the Chinese DY115-34 cruise near the Duanqiao hydrothermal field, and comprehensively studied types and distribution characteristics of seafloor substrate by combining with visual interpretations and TV-Grab Samples. Firstly, a mosaic was built to analyze backscatter distribution after multibeam backscatter data were fully processed using Geocoder engine on CARIS HIPS&SIPS software. Prior information was gained by analyzing the link between the processed backscatter data and the visual interpretations of two deep-tow video survey lines. Among the two survey lines, one corresponds to sediment-dominated seafloor and the other corresponds to pillow basalt-dominated seafloor. Then, backscatter data of the mosaic were classified statistically to identify three types of seafloor: soft substrate, medium-hard substrate and hard substrate. Compared with visual interpretations and TV-Grab Samples, these three seafloor types were interpreted as sediment, breccia and pillow basalt, respectively. Finally, a seafloor classification map was generated. According to the results, we discovered two distinguished distribution characteristics of seafloor substrate: 1. there is a transition from pillow basalt-dominated seafloor to sediment-dominated seafloor away from the SWIR axis; 2. the Duanqiao hydrothermal field is mostly outcropped by pillow basalts and locally covered by breccias and sediments, the reason of which is probably that this field is a relatively recent volcanic area.

The tectonic fabric of the ocean basins

NASA Astrophysics Data System (ADS)

Matthews, Kara J.; Müller, R. Dietmar; Wessel, Paul; Whittaker, Joanne M.

2011-12-01

We present a global community data set of fracture zones (FZs), discordant zones, propagating ridges, V-shaped structures and extinct ridges, digitized from vertical gravity gradient (VGG) maps. We use a new semi-automatic FZ tracking program to test the precision of our hand-digitized traces and find a Mean Absolute Deviation of less than 3.4 km from the raw VGG minima that most clearly delineate each feature, and less than 5.4 km from the FZ location predicted by fitting model profiles to the VGG data that represent the morphology of the individual FZs. These offsets are small considering gravity data only provide an approximation for the underlying basement morphology. We further investigate the origin of non-FZ seafloor fabric by combining published abyssal hill heights computed from gravity anomalies with global half-spreading rates. A residual abyssal hill height grid, with spreading rate effects removed, combined with our interpreted tectonic fabric reveals several types of seafloor fabric distinct from typical abyssal hills. Where discordant zones do not overprint abyssal hill signals, residual abyssal hill height anomalies correspond to seafloor that accreted near mantle thermal anomalies or zones of melt-depletion. Our analysis reveals several areas where residual abyssal hill height anomalies reflect pseudo-faults and extinct ridges associated with ridge propagation and/or microplate formation in the southern Pacific Ocean.

Marine benthic habitat mapping of the West Arm, Glacier Bay National Park and Preserve, Alaska

USGS Publications Warehouse

Hodson, Timothy O.; Cochrane, Guy R.; Powell, Ross D.

2013-01-01

Seafloor geology and potential benthic habitats were mapped in West Arm, Glacier Bay National Park and Preserve, Alaska, using multibeam sonar, groundtruthed observations, and geological interpretations. The West Arm of Glacier Bay is a recently deglaciated fjord system under the influence of glacial and paraglacial marine processes. High glacially derived sediment and meltwater fluxes, slope instabilities, and variable bathymetry result in a highly dynamic estuarine environment and benthic ecosystem. We characterize the fjord seafloor and potential benthic habitats using the recently developed Coastal and Marine Ecological Classification Standard (CMECS) by the National Oceanic and Atmospheric Administration (NOAA) and NatureServe. Due to the high flux of glacially sourced fines, mud is the dominant substrate within the West Arm. Water-column characteristics are addressed using a combination of CTD and circulation model results. We also present sediment accumulation data derived from differential bathymetry. These data show the West Arm is divided into two contrasting environments: a dynamic upper fjord and a relatively static lower fjord. The results of these analyses serve as a test of the CMECS classification scheme and as a baseline for ongoing and future mapping efforts and correlations between seafloor substrate, benthic habitats, and glacimarine processes.

GEBCO-NF Alumni Team's entry for Shell Ocean Discovery XPRIZE. An innovative seafloor mapping system of an AUV integrated with the newly designed USV SEA-KIT.

NASA Astrophysics Data System (ADS)

Wigley, R. A.; Anderson, R.; Bazhenova, E.; Falconer, R. K. H.; Kearns, T.; Martin, T.; Minami, H.; Roperez, J.; Rosedee, A.; Ryzhov, I.; Sade, H.; Seeboruth, S.; Simpson, B.; Sumiyoshi, M.; Tinmouth, N.; Zarayskaya, Y.; Zwolak, K.

2017-12-01

The international team of Nippon Foundation/GEBCO Alumni was formed to compete in the Shell Ocean Discovery XPRIZE competition. The aim of the Team is to build an innovative seafloor mapping system, not only to successfully compete in the XPRIZE challenge, but also to make a step towards autonomously mapping the complex global seafloor at resolutions not achievable by standard surface mapping systems. This new technology is linked to goals of the recently announced Nippon Foundation-GEBCO Seabed 2030 Project, aiming in highest possible resolution bathymetric mapping of global World Ocean floor by 2030. The mapping system is composed of three main elements: an Unmanned Surface Vessel (USV), an Autonomous Underwater Vehicle (AUV) and an on-shore control station. A newly designed, USV, called SEA-KIT, was be built to interact with any AUV, acting as remote surface access to the deep ocean. The major function of the SEA-KIT in the system design is 1) the potential transportation of a commercially available AUV to and from the launch site to the survey site and 2) the deployment and recovery of the AUV. In further development stages, options for AUV charging and data transfer are considered. Additionally, the SEA-KIT will offer a positioning solution during AUV operations, utilizing an Ultra Short Base Line (USBL) acoustic system. The data acquisition platform (AUV) is equipped with a high-end technology interferometric sonar with synthetic aperture options, providing the possibility of collecting bathymetric data co-registered with seafloor object imagery. An automated data processing workflow is highly desirable due to the large amount of data collected during each mission. The processing workflow is being designed to be as autonomous as possible and an algorithm for automated data processing onboard are being considered to reduce the time of data processing and make a final products available as soon as possible after the completion of data collection. No human intervention on site is required for the operation of data collection using the integrated USV and AUV mapping system. The on-shore control station only plays a supervision role and is able to assess the USV performance, while AUV works autonomously, according to a previously set survey plan. This leads to lower-risk, less-effort deep ocean mapping.

Global seafloor geomorphic features map: applications for ocean conservation and management

NASA Astrophysics Data System (ADS)

Harris, P. T.; Macmillan-Lawler, M.; Rupp, J.; Baker, E.

2013-12-01

Seafloor geomorphology, mapped and measured by marine scientists, has proven to be a very useful physical attribute for ocean management because different geomorphic features (eg. submarine canyons, seamounts, spreading ridges, escarpments, plateaus, trenches etc.) are commonly associated with particular suites of habitats and biological communities. Although we now have better bathymetric datasets than ever before, there has been little effort to integrate these data to create an updated map of seabed geomorphic features or habitats. Currently the best available global seafloor geomorphic features map is over 30 years old. A new global seafloor geomorphic features map (GSGM) has been created based on the analysis and interpretation of the SRTM (Shuttle Radar Topography Mission) 30 arc-second (~1 km) global bathymetry grid. The new map includes global spatial data layers for 29 categories of geomorphic features, defined by the International Hydrographic Organisation. The new geomorphic features map will allow: 1) Characterization of bioregions in terms of their geomorphic content (eg. GOODS bioregions, Large Marine Ecosystems (LMEs), ecologically or biologically significant areas (EBSA)); 2) Prediction of the potential spatial distribution of vulnerable marine ecosystems (VME) and marine genetic resources (MGR; eg. associated with hydrothermal vent communities, shelf-incising submarine canyons and seamounts rising to a specified depth); and 3) Characterization of national marine jurisdictions in terms of their inventory of geomorphic features and their global representativeness of features. To demonstrate the utility of the GSGM, we have conducted an analysis of the geomorphic feature content of the current global inventory of marine protected areas (MPAs) to assess the extent to which features are currently represented. The analysis shows that many features have very low representation, for example fans and rises have less than 1 per cent of their total area inside existing protected areas. The ';best' represented features, trenches and troughs, have only 8.7 and 5.9 per cent respectively of their total area inside existing protected areas. Seamounts have only 2.8% of their area within existing MPAs. Diagram showing the hierarchy of geomorphic features mapped in the present study. Base layer features are the shelf, slope, abyss and hadal zones. The occurrence of some features is confined to one of the base layers, whereas the occurrence of other features is confined to two or more base layers, as illustrated by shading. Basins and sills are the only features that occur over all four base layers.

Overview of the Ridge 2000 Integrated Studies Sites

NASA Astrophysics Data System (ADS)

Fisher, C.

2005-12-01

The Ridge 2000 program is in its fourth year and fieldwork at each of the Integrated Studies Sites (ISS) is in full swing. Multidisciplinary monitoring continues at the EPR ISS with seismic, temperature, and current data being continuously recorded. Long-term fluid sampling programs aimed at furthering our understanding of temporal variations in the chemistry of high-temperature hydrothermal vents are continuing. In situ fluid chemistry monitors have been deployed for weeks, and longer deployments are planned as the technology matures. Nested within these monitoring studies are experiments addressing larval dispersal and changes in microbial and macrobiological communities. In early 2006, geodetic monitoring will begin, with an array of pressure gauges as well as a detailed compliance study. By early 2007, a 3-D multichannel seismic survey will have provided unprecedented details of the crustal structure at 9°50'N. Together these studies provide a strong framework for an interdisciplinary understanding of the links between the forces that produce a mid-ocean ridge spreading center and their manifestation on the seafloor. Fieldwork on the Endeavour segment of the Juan de Fuca ridge in 2005 also included a balance of monitoring, experimental, and sampling programs across a wide range of disciplines. Four interdisciplinary field programs were conducted to maintain and expand ongoing Ridge 2000 and proto-NEPTUNE experiments. These research programs continued development and testing in situ chemical and microbial sensors, conducted co-registered sampling of fluids, fauna, and chimney material, and recovered moorings that measured heat and chemical fluxes at the segment scale. High-resolution mapping was also completed at this site, which has been chosen for one of the two initial NEPTUNE Canada nodes to prepare the way for the collaborative, cabled observatory projects. The mapping cruise included 5 secondary school teachers as part of the REVEL outreach and education program. Live transmission of high-definition video from the seafloor to land stations provided an exciting preview of the potential of high-bandwidth communication with the seafloor. The first round of fieldwork at the East Lau Spreading Center ISS was completed in 2005. Building upon the two R2K-funded cruises in 2004, three cruises in 2005 sampled 7 hydrothermal vent sites. Four of these sites were discovered by the collaborative efforts of R2K scientists, working together across cruises, and one site by Japanese colleagues collaborating with R2K scientists in 2004. Another of the sites was discovered during the first R2K cruise of 2005. The SM2000 mounted on Jason II in 2005 was used to create fine-scale bathymetric maps of six of the sites and high-resolution imagery was collected for photomosaics of selected areas of hydrothermal activity within the sites. These maps and imagery guided even finer scale surveys, equipment deployments and sampling of basalt, hydrothermal deposits, vent fluids, microbial mats, and benthic organisms. Some of the fauna collected are still alive and under study in pressure vessels in R2K-supported laboratories. Results from these cruises have improved our understanding of this back-arc spreading center, "from mantle to microbe," and are invaluable for selection of the focus area, or bull's eye, for the next generation of integrated, interdisciplinary studies in this region.

Morphological characterization of coral reefs by combining lidar and MBES data: A case study from Yuanzhi Island, South China Sea

NASA Astrophysics Data System (ADS)

Zhang, Kai; Yang, Fanlin; Zhang, Hande; Su, Dianpeng; Li, QianQian

2017-06-01

The correlation between seafloor morphological features and biological complexity has been identified in numerous recent studies. This research focused on the potential for accurate characterization of coral reefs based on high-resolution bathymetry from multiple sources. A standard deviation (STD) based method for quantitatively characterizing terrain complexity was developed that includes robust estimation to correct for irregular bathymetry and a calibration for the depth-dependent variablity of measurement noise. Airborne lidar and shipborne sonar bathymetry measurements from Yuanzhi Island, South China Sea, were merged to generate seamless high-resolution coverage of coral bathymetry from the shoreline to deep water. The new algorithm was applied to the Yuanzhi Island surveys to generate maps of quantitive terrain complexity, which were then compared to in situ video observations of coral abundance. The terrain complexity parameter is significantly correlated with seafloor coral abundance, demonstrating the potential for accurately and efficiently mapping coral abundance through seafloor surveys, including combinations of surveys using different sensors.

Marine benthic habitat mapping of Muir Inlet, Glacier Bay National Park and Preserve, Alaska, with an evaluation of the Coastal and Marine Ecological Classification Standard III

USGS Publications Warehouse

Trusel, Luke D.; Cochrane, Guy R.; Etherington, Lisa L.; Powell, Ross D.; Mayer, Larry A.

2010-01-01

Seafloor geology and potential benthic habitats were mapped in Muir Inlet, Glacier Bay National Park and Preserve, Alaska, using multibeam sonar, ground-truth information, and geological interpretations. Muir Inlet is a recently deglaciated fjord that is under the influence of glacial and paraglacial marine processes. High glacially derived sediment and meltwater fluxes, slope instabilities, and variable bathymetry result in a highly dynamic estuarine environment and benthic ecosystem. We characterize the fjord seafloor and potential benthic habitats using the Coastal and Marine Ecological Classification Standard (CMECS) recently developed by the National Oceanic and Atmospheric Administration (NOAA) and NatureServe. Substrates within Muir Inlet are dominated by mud, derived from the high glacial debris flux. Water-column characteristics are derived from a combination of conductivity temperature depth (CTD) measurements and circulation-model results. We also present modern glaciomarine sediment accumulation data from quantitative differential bathymetry. These data show Muir Inlet is divided into two contrasting environments: a dynamic upper fjord and a relatively static lower fjord. The accompanying maps represent the first publicly available high-resolution bathymetric surveys of Muir Inlet. The results of these analyses serve as a test of the CMECS and as a baseline for continued mapping and correlations among seafloor substrate, benthic habitats, and glaciomarine processes.

Map of Distribution of Bottom Sediments on the Continental Shelf, Gulf of Alaska

USGS Publications Warehouse

Evans, Kevin R.; Carlson, Paul R.; Hampton, Monty A.; Marlow, Michael S.; Barnes, Peter W.

2000-01-01

Introduction The U.S. Geological Survey has a long history of exploring marine geology in the Gulf of Alaska. As part of a cooperative program with other federal and state agencies, the USGS is investigating the relations between ocean-floor geology and benthic marine biohabitats. This bottom sediment map, compiled from published literature will help marine biologists develop an understanding of sea-floor geology in relation to various biological habitats. The pattern of sea-floor sedimentation and bottom morphology in the Gulf of Alaska reflects a complex interplay of regional tectonism, glacial advances and retreats, oceanic and tidal currents, waves, storms, eustatic change, and gravity-driven processes. This map, based on numerous cruises during the period of 1970-1996, shows distribution of bottom sediments in areas of study on the continental shelf. The samples were collected with piston, box, and gravity corers, and grab samplers. The interpretations of sediment distribution are the products of sediment size analyses combined with interpretations of high-resolution seismic reflection profiles. The sea floor was separated into several areas as follows: Cook Inlet -- Hazards studies in this embayment emphasized sediment distribution, sediment dynamics, bedforms, shallow faults, and seafloor stability. Migrating mega-sandwaves, driven by strong tidal currents, influence seabed habitats and stability of the seafloor, especially near pipelines and drilling platforms. The coarseness of the bottom sediment reinforces the influence of the strong tidal currents on the seafloor habitats. Kodiak Shelf -- Tectonic framework studies demonstrate the development of an accretionary wedge as the Pacific Plate underthrusts the Alaskan landmass. Seismic data across the accretionary wedge reveal anomalies indicative of fluid/gas vent sites in this segment of the continental margin. Geologic hazards research shows that movement along numerous shallow faults poses a risk to sea floor structures. Sea-floor sediment on shallow banks is eroded by seasonal wave-generated currents. The winnowing action of the large storm waves results in concentrations of gravel over broad segments of the Kodiak shelf. Northeastern Gulf of Alaska -- Tectonic framework studies demonstrate that rocks of distant origin (Yakutat terrane) are currently attached to and moving with the Pacific Plate, as it collides with and is subducted beneath southern Alaska. This collision process has led to pronounced structural deformation of the continental margin and adjacent southern Alaska. Consequences include rapidly rising mountains and high fluvial and glacial sedimentation rates on the adjacent margin and ocean floor. The northeastern Gulf of Alaska shelf also has concentrations of winnowed (lag) gravel on Tarr Bank and on the outer shelf southeast of Yakutat Bay. Between Kayak Island and Yakutat Bay the outer shelf consists of pebbly mud (diamict). This diamict is a product of glacial marine sedimentation during the Pleistocene and is present today as a relict sediment. A prograding wedge of Holocene sediment consisting of nearshore sand grading seaward into clayey silt and silty clay covers the relict pebbly mud to mid-shelf and beyond. Shelf and slope channel systems transport glacially derived sediment across the continental margin into Surveyor Channel, an abyssal fan and channel system that reaches over 1,000 km to the Aleutian Trench.

Geo-hazard by sediment mass movements in submarine canyons

NASA Astrophysics Data System (ADS)

Ghaith, Afif; Fakhri, Milad; Ivaldi, Roberta; Ciavola, Paolo

2017-04-01

Submarine mass movements and their consequences are of major concern for coastal communities and infrastructures but also for the exploitation and the development of seafloor resources. Elevated awareness of the need for better understanding of the underwater mass movement is coupled with great advances in underwater mapping technologies over the past two decades. The seafloor in the Nahr Ibrahim and Saida regions (Lebanon) is characterized by deep canyons, reaching one thousand meters depths in proximity of the coast. Signs of submarine mass movement instability related to these canyons create a connection between shallow and deep water. The presence of these canyons in a tectonically active area generates a particular drained mechanism to the sediment in form of mass movement and slumping. Identification of potential areas where slope movements could be triggered requires data with high spatial resolution. Since this area is poorly explored, in the framework of an international project between Lebanese Navy, Lebanese National Center for Marine Sciences, University of Ferrara and Italian Hydrographic Institute, we analyse the morpho-bathymetric and sedimentological characters of the coastal and shelf sectors. Multibeam echosounder and sub-bottom profiler acoustic systems calibrated with ground truths (sediment grab and core samples) allow us to characterize the nature of seafloor and sub-seafloor with particular detail to the geotechnical properties of sediments and high resolution seismic stratigraphy of the shallow layers. The detection of particular undersea features provides detail maps which are in support to littoral morpho-dynamics, coastal transport and sediment budget. Multilayer hydro-oceanographic map, referring to the seafloor dynamics in connection with deep water environment and drainage system, in accordance to the International Hydrographic Standards and nautical supports, are produced. This high resolution multibeam bathymetry dataset, integrated by the sedimentological characters, will provide useful constraints to the potential natural hazards that may be caused by active tectonics in the offshore and a high coastal risk in a most populated region of Lebanon.

Geomorphology of the Southern Gulf of California Seafloor

NASA Astrophysics Data System (ADS)

Eakins, B. W.; Lonsdale, P. F.; Fletcher, J. M.; Ledesma, J. V.

2004-12-01

A Spring 2004 multibeam sonar survey defined the seafloor geomorphology of the southern part of Gulf of California and the intersection of the East Pacific Rise with the North American continent. Survey goals included mapping structural patterns formed during the rifting that opened the Gulf and identifying the spatial transition from continental rifting to seafloor spreading. Multibeam sonar imagery, augmented with archival data and a subaerial DEM of Mexico, illuminates the principal features of this boundary zone between obliquely diverging plates: (i) active and inactive oceanic risecrests within young oceanic basins that are rich in evidence for off-axis magmatic eruption and intrusion; (ii) transforms with pull-apart basins and transpressive ridges along shearing continental margins and within oceanic crust; (iii) orphaned blocks of continental crust detached from sheared and rifted continental margins; and (iv) young, still-extending continental margins dissected by submarine canyons that in many cases are deeply drowned river valleys. Many of the canyons are conduits for turbidity currents that feed deep-sea fans on oceanic and subsided continental crust, and channel sediment to spreading axes, thereby modifying the crustal accretion process. We present a series of detailed bathymetric and seafloor reflectivity maps of this MARGINS Rupturing Continental Lithosphere focus site illustrating geomorphologic features of the southern part of the Gulf, from Guaymas Basin to the Maria Magdalena Rise.

Mapping cold-water coral habitats at different scales within the Northern Ionian Sea (Central Mediterranean): an assessment of coral coverage and associated vulnerability.

PubMed

Savini, Alessandra; Vertino, Agostina; Marchese, Fabio; Beuck, Lydia; Freiwald, André

2014-01-01

In this study, we mapped the distribution of Cold-Water Coral (CWC) habitats on the northern Ionian Margin (Mediterranean Sea), with an emphasis on assessing coral coverage at various spatial scales over an area of 2,000 km(2) between 120 and 1,400 m of water depth. Our work made use of a set of data obtained from ship-based research surveys. Multi-scale seafloor mapping data, video inspections, and previous results from sediment samples were integrated and analyzed using Geographic Information System (GIS)-based tools. Results obtained from the application of spatial and textural analytical techniques to acoustic meso-scale maps (i.e. a Digital Terrain Model (DTM) of the seafloor at a 40 m grid cell size and associated terrain parameters) and large-scale maps (i.e. Side-Scan Sonar (SSS) mosaics of 1 m in resolution ground-truthed using underwater video observations) were integrated and revealed that, at the meso-scale level, the main morphological pattern (i.e. the aggregation of mound-like features) associated with CWC habitat occurrences was widespread over a total area of 600 km(2). Single coral mounds were isolated from the DTM and represented the geomorphic proxies used to model coral distributions within the investigated area. Coral mounds spanned a total area of 68 km(2) where different coral facies (characterized using video analyses and mapped on SSS mosaics) represent the dominant macro-habitat. We also mapped and classified anthropogenic threats that were identifiable within the examined videos, and, here, discuss their relationship to the mapped distribution of coral habitats and mounds. The combined results (from multi-scale habitat mapping and observations of the distribution of anthropogenic threats) provide the first quantitative assessment of CWC coverage for a Mediterranean province and document the relevant role of seafloor geomorphology in influencing habitat vulnerability to different types of human pressures.

California State Waters Map Series-Offshore of Point Reyes, California

USGS Publications Warehouse

Watt, Janet T.; Dartnell, Peter; Golden, Nadine E.; Greene, H. Gary; Erdey, Mercedes D.; Cochrane, Guy R.; Johnson, Samuel Y.; Hartwell, Stephen R.; Kvitek, Rikk G.; Manson, Michael W.; Endris, Charles A.; Dieter, Bryan E.; Sliter, Ray W.; Krigsman, Lisa M.; Lowe, Erik; Chinn, John L.; Watt, Janet T.; Cochran, Susan A.

2015-01-01

This publication about the Offshore of Point Reyes map area includes ten map sheets that contain explanatory text, in addition to this descriptive pamphlet and a data catalog of geographic information system (GIS) files. Sheets 1, 2, and 3 combine data from four different sonar surveys to generate comprehensive high-resolution bathymetry and acoustic-backscatter coverage of the map area. These data reveal a range of physiographic features (highlighted in the perspective views on sheet 4) such as the flat, sediment-covered seafloor in Drakes Bay, as well as abundant “scour depressions” on the Bodega Head–Tomales Point shelf (see sheet 9) and local, tectonically controlled bedrock uplifts. To validate geological and biological interpretations of the sonar data shown in sheets 1, 2, and 3, the U.S. Geological Survey towed a camera sled over specific offshore locations, collecting both video and photographic imagery; these “ground-truth” surveying data are summarized on sheet 6. Sheet 5 is a “seafloor character” map, which classifies the seafloor on the basis of depth, slope, rugosity (ruggedness), and backscatter intensity and which is further informed by the ground-truth-survey imagery. Sheet 7 is a map of “potential habitats,” which are delineated on the basis of substrate type, geomorphology, seafloor process, or other attributes that may provide a habitat for a specific species or assemblage of organisms. Sheet 8 compiles representative seismic-reflection profiles from the map area, providing information on the subsurface stratigraphy and structure of the map area. Sheet 9 shows the distribution and thickness of young sediment (deposited over the last about 21,000 years, during the most recent sea-level rise) in both the map area and the larger Salt Point to Drakes Bay region, interpreted on the basis of the seismic-reflection data, and it identifies the Offshore of Point Reyes map area as lying within the Bodega Head–Tomales Point shelf, Point Reyes bar, and Bolinas shelf domains. Sheet 10 is a geologic map that merges onshore geologic mapping (compiled from existing maps by the California Geological Survey) and new offshore geologic mapping that is based on integration of high-resolution bathymetry and backscatter imagery (sheets 1, 2, 3), seafloor-sediment and rock samples (Reid and others, 2006), digital camera and video imagery (sheet 6), and high-resolution seismic-reflection profiles (sheet 8), as well as aerial-photographic interpretation of nearshore areas. The information provided by the map sheets, pamphlet, and data catalog have a broad range of applications. High-resolution bathymetry, acoustic backscatter, ground-truth-surveying imagery, and habitat mapping all contribute to habitat characterization and ecosystem-based management by providing essential data for delineation of marine protected areas and ecosystem restoration. Many of the maps provide high-resolution baselines that will be critical for monitoring environmental change associated with climate change, coastal development, or other forcings. High-resolution bathymetry is a critical component for modeling coastal flooding caused by storms and tsunamis, as well as inundation associated with longer term sea-level rise. Seismic-reflection and bathymetric data help characterize earthquake and tsunami sources, critical for natural-hazard assessments of coastal zones. Information on sediment distribution and thickness is essential to the understanding of local and regional sediment transport, as well as the development of regional sediment-management plans. In addition, siting of any new offshore infrastructure (for example, pipelines, cables, or renewable-energy facilities) will depend on high-resolution mapping. Finally, this mapping will both stimulate and enable new scientific research and also raise public awareness of, and education about, coastal environments and issues.

New gravity map of the western Galicia margin: The Spanish exclusive economic zone project

NASA Astrophysics Data System (ADS)

Carbó, A.; Muñoz, A.; Druet, M.; Llanes, P.; Álvarez, J.

2004-12-01

Since 1995, the most intensive mapping of the seafloor off the Spanish coast has been carried out in the framework of the Spanish Exclusive Economic Zone Project (ZEEE). The main objectives of this project are to obtain improved multibeam bathymetric cartography of the areas off Spanish coastlines, and to perform a geophysical survey, well-suited with a 10-knot navigation velocity (some techniques requires lower navigation velocity). The geophysical survey includes gravity, geomagnetism, and low-penetration seismic techniques in order to infer the geological structure of the seafloor. Other oceanographic variables such as current, surface salinity, and temperature profiles, can be recorded without compromising this systematic survey effort.

New insights into the geodiversity of the southeast Indian Ocean seafloor revealed by Malaysia Airlines flight MH370 search data

NASA Astrophysics Data System (ADS)

Picard, K.; Brooke, B. B.; Harris, P. T.; Siwabessy, J. P. W.; Coffin, M. F.; Tran, M.; Spinoccia, M.; Weales, J.; Macmillan-Lawler, M.; Sullivan, J.

2017-12-01

A large multibeam echo sounder (MBES) dataset (710, 000 km2, inclusive of transit data) was acquired in the SE Indian Ocean to assist the search for Malaysia Airlines Flight 370 (MH370). Here, we present the results of a geomorphic analysis of this new data and compare with the Global Seafloor Geomorphic Features Map (GSFM) that is based on coarser resolution satellite-derived bathymetry data. The analyses show that abyssal plains and basins are significantly more rugged than their representation in the GSFM, with a 20% increase in the extent of hills and mountains. The new model also reveals four times more seamounts than presented in the GSFM, suggesting a greater number of these features than previously estimated for the broader region and indeed globally. This is important considering the potential ecological significance of these high-relief structures. Analyses of the new data also enabled knolls, fans, valleys, canyons, troughs and holes to be identified, doubling the number of discrete features mapped and revealing the true geodiversity of the deep ocean in this area. This high-resolution mapping of the seafloor also provides new insights into the geological evolution of the region, both in terms of structural, tectonic, and sedimentary processes. For example, sub-parallel ridges extend over approximately 20% of the area mapped and their form and alignment provide valuable insight into Southeast Indian Ridge seafloor spreading processes. Rifting is recorded along the Broken Ridge - Diamantina Escarpment, with rift blocks and well-bedded sedimentary bedrock exposures discernible down to 2,400 m water depth. Ocean floor sedimentary processes are represented in sediment mass transport features, especially along and north of Broken Ridge, and pockmarks (the finest-scale features mapped) south of Diamantina Trench. The new MBES data highlight the complexity of the search area and serve to demonstrate how little we know about the 85-90% of the ocean floor that has not been mapped with this technology. The availability of high-resolution and accurate maps of the ocean floor can clearly provide new insights into the Earth's geological evolution, modern ocean floor processes, and the location of sites that are likely to have relatively high biodiversity.

Mapping of the Seagrass Cover Along the Mediterranean Coast of Turkey Using Landsat 8 Oli Images

NASA Astrophysics Data System (ADS)

Bakirman, T.; Gumusay, M. U.; Tuney, I.

2016-06-01

Benthic habitat is defined as ecological environment where marine animals, plants and other organisms live in. Benthic habitat mapping is defined as plotting the distribution and extent of habitats to create a map with complete coverage of the seabed showing distinct boundaries separating adjacent habitats or the use of spatially continuous environmental data sets to represent and predict biological patterns on the seafloor. Seagrass is an essential endemic marine species that prevents coast erosion and regulates carbon dioxide absorption in both undersea and atmosphere. Fishing, mining, pollution and other human activities cause serious damage to seabed ecosystems and reduce benthic biodiversity. According to the latest studies, only 5-10% of the seafloor is mapped, therefore it is not possible to manage resources effectively, protect ecologically important areas. In this study, it is aimed to map seagrass cover using Landsat 8 OLI images in the northern part of Mediterranean coast of Turkey. After pre-processing (e.g. radiometric, atmospheric, water depth correction) of Landsat images, coverage maps are produced with supervised classification using in-situ data which are underwater photos and videos. Result maps and accuracy assessment are presented and discussed.

Long-range side scan sonar and geophysical survey of the Aleutian Basin

NASA Astrophysics Data System (ADS)

Carlson, P. R.; Cooper, , A. K.; Gardner, J. V.; Karl, H. A.; Marlow, M. S.; Stevenson, A. J.; Huggett, Q.; Kenyon, N. H.; Parson, L. M.

In 1983, President Ronald Reagan established the Exclusive Economic Zone, an area of 3.9 billion acres (˜1.6 billion hectares) that gives the United States exclusive rights to energy and mineral resources on and under the seafloor for a distance of 200 nautical miles (˜370 km) from its coastline and in its territorial seas [Rowland et al., 1983]. The U.S. Geological Survey established a program, EEZ-Scan, in spring 1984 to map this new undersea territory [Gardner, 1984; EEZ-Scan Group, 1985]. The results of the first field season of mapping the EEZ off the conterminous west coast of the United States have been published as an atlas [EEZ-Scan 84 Scientific Staff, 1986] that is the first volume of a series.

Teaching Plate Tectonic Concepts using GeoMapApp Learning Activities

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.; Kluge, S.

2012-12-01

GeoMapApp Learning Activities ( http://serc.carleton.edu/geomapapp/collection.html ) can help educators to expose undergraduate students to a range of earth science concepts using high-quality data sets in an easy-to-use map-based interface called GeoMapApp. GeoMapApp Learning Activities require students to interact with and analyse research-quality geoscience data as a means to explore and enhance their understanding of underlying content and concepts. Each activity is freely available through the SERC-Carleton web site and offers step-by-step student instructions and answer sheets. Also provided are annotated educator versions of the worksheets that include teaching tips, additional content and suggestions for further work. The activities can be used "off-the-shelf". Or, since the educator may require flexibility to tailor the activities, the documents are provided in Word format for easy modification. Examples of activities include one on the concept of seafloor spreading that requires students to analyse global seafloor crustal age data to calculate spreading rates in different ocean basins. Another activity has students explore hot spots using radiometric age dating of rocks along the Hawaiian-Emperor seamount chain. A third focusses upon the interactive use of contours and profiles to help students visualise 3-D topography on 2-D computer screens. A fourth activity provides a study of mass wasting as revealed through geomorphological evidence. The step-by-step instructions and guided inquiry approach reduce the need for teacher intervention whilst boosting the time that students can spend on productive exploration and learning. The activities can be used, for example, in a classroom lab with the educator present and as self-paced assignments in an out-of-class setting. GeoMapApp Learning Activities are funded through the NSF GeoEd program and are aimed at students in the introductory undergraduate, community college and high school levels. The activities are based upon GeoMapApp (http://www.geomapapp.org), a free map-based data exploration and visualisation tool that allows students to access a wide range of geoscience data in a virtual lab-like environment.

Swath sonar mapping of Earth's submarine plate boundaries

NASA Astrophysics Data System (ADS)

Carbotte, S. M.; Ferrini, V. L.; Celnick, M.; Nitsche, F. O.; Ryan, W. B. F.

2014-12-01

The recent loss of Malaysia Airlines flight MH370 in an area of the Indian Ocean where less than 5% of the seafloor is mapped with depth sounding data (Smith and Marks, EOS 2014) highlights the striking lack of detailed knowledge of the topography of the seabed for much of the worlds' oceans. Advances in swath sonar mapping technology over the past 30 years have led to dramatic improvements in our capability to map the seabed. However, the oceans are vast and only an estimated 10% of the seafloor has been mapped with these systems. Furthermore, the available coverage is highly heterogeneous and focused within areas of national strategic priority and community scientific interest. The major plate boundaries that encircle the globe, most of which are located in the submarine environment, have been a significant focus of marine geoscience research since the advent of swath sonar mapping. While the location of these plate boundaries are well defined from satellite-derived bathymetry, significant regions remain unmapped at the high-resolutions provided by swath sonars and that are needed to study active volcanic and tectonic plate boundary processes. Within the plate interiors, some fossil plate boundary zones, major hotspot volcanoes, and other volcanic provinces have been the focus of dedicated research programs. Away from these major tectonic structures, swath mapping coverage is limited to sparse ocean transit lines which often reveal previously unknown deep-sea channels and other little studied sedimentary structures not resolvable in existing low-resolution global compilations, highlighting the value of these data even in the tectonically quiet plate interiors. Here, we give an overview of multibeam swath sonar mapping of the major plate boundaries of the globe as extracted from public archives. Significant quantities of swath sonar data acquired from deep-sea regions are in restricted-access international archives. Open access to more of these data sets would enable global comparisons of plate boundary structures and processes and could facilitate a more coordinated approach to optimizing the future acquisition of these high-value data by the global research community.

Benthic habitat map of U.S. Coral Reef Task Force Faga‘alu Bay priority study area, Tutuila, American Samoa

USGS Publications Warehouse

Cochran, Susan A.; Gibbs, Ann E.; D'Antonio, Nicole L.; Storlazzi, Curt D.

2016-05-18

The coral reef in Faga‘alu Bay, Tutuila, American Samoa, has suffered numerous natural and anthropogenic stresses. Areas once dominated by live coral are now mostly rubble surfaces covered with turf or macroalgae. In an effort to improve the health and resilience of the coral reef system, the U.S. Coral Reef Task Force selected Faga‘alu Bay as a priority study area. To support these efforts, the U.S. Geological Survey mapped nearly 1 km2 of seafloor to depths of about 60 m. Unconsolidated sediment (predominantly sand) constitutes slightly greater than 50 percent of the seafloor in the mapped area; reef and other hardbottom potentially available for coral recruitment constitute nearly 50 percent of the mapped area. Of this potentially available hardbottom, only slightly greater than 37 percent is covered with at least 10 percent coral, which is fairly evenly distributed between the reef flat, fore reef, and offshore bank/shelf. 

Rediscovery and Exploration of Magic Mountain, Explorer Ridge, NE Pacific

NASA Astrophysics Data System (ADS)

Embley, R. W.

2002-12-01

A two-part exploration program at Explorer Ridge, the northernmost spreading segment of the NE Pacific spreading centers, was conducted in two phases during June to August of 2002. A robust hydrothermal system (Magic Mountain) was found in this area in the early 1980s by the Canadian PISCES IV submersible, but its dimensions and geologic relationships were not well determined due to limited dives and poor navigation. The first part of the 2002 exploration program utilized an EM300 multibeam sonar on T. G. Thompson, the autonomous vehicle ABE, and a CTD/rosette system to map the seafloor and conduct hydrothermal plume surveys. While ABE conducted detailed surveys in the area where the most intense hydrothermal plume was found on the initial CTD survey, the T. G. Thompson conducted additional multibeam surveys, CTD casts and CTD tow-yos on the other second order segments up to 60 km away. This increased the efficiency of the expedition by at least 30%. After 12 days on site, a multibeam map was completed of the entire segment, the spatial distribution and character of the hydrothermal plumes were mapped out and a section of seafloor measuring 2 x 5.5 km was mapped in detail with ABE. The ABE used two sonar systems, a previously proven Imagenex pencil beam sonar, and, for the first time, a multibeam sonar (SM2000). In addition to the high-resolution bathymetry (1 m grid-cell size resolution for the SM2000), ABE collected temperature, optical backscatter, eH redox potential, and magnetic field data. Using the CTD and ABE data, a major hydrothermal system was easily located on the seafloor during the second part of the exploration program using the ROPOS remotely operated vehicle. The Magic Mountain hydrothermal system is located almost entirely on the eastern constructional shoulder of the ridge eastward of the rim of the eastern boundary fault of the axial valley. This is in contrast to most other hydrothermal systems on intermediate rate spreading ridges, which are either centered within the neovolcanic zone or associated with a boundary fault. The active venting occurs over at least 400 m along axis and is mostly concentrated in clusters of high temperature chimneys, each about 50 m in diameter. Two of these clusters have a basal sulfide mound. There is obvious structural control of many of the vents - many lie along or in line with distinct fissures or small faults and the entire field appears to have developed within a shallow graben formed on the ridge flank. Most of the chimneys consist of relatively friable sulfates (barite/anhydrite) that vent clear fluid at up to about 290°C. Several larger active chimneys consist primarily of sulfide minerals that emit gray smoke with temperatures as high as 312§ C. Biologic communities were primarily associated with the more stable sulfide structures. The mixture of proven technology used from a capable surface vessel during the 2002 Explorer Ridge program, including a cutting edge deep AUV and a large ROV, provided the tools to explore a little-known site at a full range of scales in a short amount of time and collect invaluable samples for research. These initial data sets from the 2002 exploration program set the stage for more detailed studies of this unique hydrothermal system in the future.

Oceanography from satellites

NASA Technical Reports Server (NTRS)

Wilson, W. S.

1981-01-01

It is pointed out that oceanographers have benefited from the space program mainly through the increased efficiency it has brought to ship operations. For example, the Transit navigation system has enabled oceanographers to compile detailed maps of sea-floor properties and to more accurately locate moored subsurface instrumentation. General descriptions are given of instruments used in satellite observations (altimeter, color scanner, infrared radiometer, microwave radiometer, scatterometer, synthetic aperture radar). It is pointed out that because of the large volume of data that satellite instruments generate, the development of algorithms for converting the data into a form expressed in geophysical units has become especially important.

Use of acoustic classification of sidescan sonar data for mapping benthic habitat in the Northern Channel Islands, California

USGS Publications Warehouse

Cochrane, Guy R.; Lafferty, Kevin D.

2002-01-01

Highly reflective seafloor features imaged by sidescan sonar in nearshore waters off the Northern Channel Islands (California, USA) have been observed in subsequent submersible dives to be areas of thin sand covering bedrock. Adjacent areas of rocky seafloor, suitable as habitat for endangered species of abalone and rockfish, and encrusting organisms, cannot be differentiated from the areas of thin sand on the basis of acoustic backscatter (i.e. grey level) alone. We found second-order textural analysis of sidescan sonar data useful to differentiate the bottom types where data is not degraded by near-range distortion (caused by slant-range and ground-range corrections), and where data is not degraded by far-range signal attenuation. Hand editing based on submersible observations is necessary to completely convert the sidescan sonar image to a bottom character classification map suitable for habitat mapping.

Gas hydrate environmental monitoring program in the Ulleung Basin, East Sea of Korea

NASA Astrophysics Data System (ADS)

Ryu, Byong-Jae; Chun, Jong-Hwa; McLean, Scott

2013-04-01

As a part of the Korean National Gas Hydrate Program, the Korea Institute of Geoscience and Mineral Resources (KIGAM) has been planned and conducted the environmental monitoring program for the gas hydrate production test in the Ulleung Basin, East Sea of Korea in 2014. This program includes a baseline survey using a KIGAM Seafloor Observation System (KISOS) and R/V TAMHAE II of KIGAM, development of a KIGAM Seafloor Monitoring System (KIMOS), and seafloor monitoring on various potential hazards associated with the dissociated gas from gas hydrates during the production test. The KIGAM also plans to conduct the geophysical survey for determining the change of gas hydrate reservoirs and production-efficiency around the production well before and after the production test. During production test, release of gas dissociated from the gas hydrate to the water column, seafloor deformation, changes in chemical characteristics of bottom water, changes in seafloor turbidity, etc. will be monitored by using the various monitoring instruments. The KIMOS consists of a near-field observation array and a far-field array. The near-field array is constructed with four remote sensor platforms each, and cabled to the primary node. The far-field sensor array will consists of four autonomous instrument pods. A scientific Remotely Operated Vehicle (ROV) will be used to deploy the sensor arrays, and to connect the cables to each field instrument package and a primary node. A ROV will also be tasked to collect the water and/or gas samples, and to identify any gas (bubble) plumes from the seafloor using a high-frequency sector scanning sonar. Power to the near-field instrument packages will be supplied by battery units located on the seafloor near the primary node. Data obtained from the instruments on the near-field array will be logged and downloaded in-situ at the primary node, and transmitted real-time to the support vessel using a ROV. These data will also be transmitted real-time to the drilling vessel via satellite.

Towards the Complete Characterization of Marine-Terminating Glacier Outlet Systems

NASA Astrophysics Data System (ADS)

Mayer, L. A.; Jakobsson, M.; Mix, A. C.; Jerram, K.; Hogan, K.; Heffron, E.; Muenchow, A.

2016-12-01

The Petermann Glacier Experiment was aimed at understanding past variations in Petermann Glacier and their relationship to changes in climatic and oceanographic conditions. A critical component of the experiment was a comprehensive program conducted on the icebreaker Oden to map submarine glacial landforms, offering insight into past ice dynamics and establishing the overall geomorphological context of the region. Concurrent water-column mapping provided remarkable insight into modern glacial, oceanographic, and biological processes suggesting that a carefully designed experiment could provide a near-complete characterization of marine-terminating glacier outlet systems. Water-column mapping revealed seeps emanating from several seafloor regions. These features appeared along common depth zones and may represent fresh water emanating from a submerged aquifer; initial pore water analyses of cores also imply a fresh water flux into the fjord system. Water-column data also show a spatially consistent but variable distribution of a strong mid-water scattering layer, a biological response possibly tracing the inflow of Atlantic water into the fjord and enhanced by input from local outlet glaciers. The continuous nature of these acoustic records over 30 days offers a complete 4-D picture of the distribution of the scattering layer (and perhaps internal circulation patterns and water-mass interactions) with a spatial and temporal distribution far beyond that achievable by traditional oceanographic stations. Additional, higher-resolution water-column imaging around local outlet glaciers presents a clear picture of subglacial sediment-laden meltwater plumes. Thus in addition to the paleoceanographic information they provided, the acoustic systems deployed captured a 4D-view of many of the modern geological, oceanographic and ecological processes within and adjacent to the Petermann Glacier marine system. With the addition of seafloor and water-column sampling, long-term oceanographic moorings, a much more robust biological program (to understand what we are mapping in the water-column) and, the ability to extend our measurements under the ice sheet, we stand poised to truly characterize and hopefully understand the processes at work in front of marine-terminating outlet glaciers.

Quantifying Coseismic Normal Fault Rupture at the Seafloor: The 2004 Les Saintes Earthquake Along the Roseau Fault (French Antilles)

NASA Astrophysics Data System (ADS)

Olive, J. A. L.; Escartin, J.; Leclerc, F.; Garcia, R.; Gracias, N.; Odemar Science Party, T.

2016-12-01

While >70% of Earth's seismicity is submarine, almost all observations of earthquake-related ruptures and surface deformation are restricted to subaerial environments. Such observations are critical for understanding fault behavior and associated hazards (including tsunamis), but are not routinely conducted at the seafloor due to obvious constraints. During the 2013 ODEMAR cruise we used autonomous and remotely operated vehicles to map the Roseau normal Fault (Lesser Antilles), source of the 2004 Mw6.3 earthquake and associated tsunami (<3.5m run-up). These vehicles acquired acoustic (multibeam bathymetry) and optical data (video and electronic images) spanning from regional (>1 km) to outcrop (<1 m) scales. These high-resolution submarine observations, analogous to those routinely conducted subaerially, rely on advanced image and video processing techniques, such as mosaicking and structure-from-motion (SFM). We identify sub-vertical fault slip planes along the Roseau scarp, displaying coseismic deformation structures undoubtedly due to the 2004 event. First, video mosaicking allows us to identify the freshly exposed fault plane at the base of one of these scarps. A maximum vertical coseismic displacement of 0.9 m can be measured from the video-derived terrain models and the texture-mapped imagery, which have better resolution than any available acoustic systems (<10 cm). Second, seafloor photomosaics allow us to identify and map both additional sub-vertical fault scarps, and cracks and fissures at their base, recording hangingwall damage from the same event. These observations provide critical parameters to understand the seismic cycle and long-term seismic behavior of this submarine fault. Our work demonstrates the feasibility of extensive, high-resolution underwater surveys using underwater vehicles and novel imaging techniques, thereby opening new possibilities to study recent seafloor changes associated with tectonic, volcanic, or hydrothermal activity.

Quantifying Methane Flux from a Prominent Seafloor Crater with Water Column Imagery Filtering and Bubble Quantification Techniques

NASA Astrophysics Data System (ADS)

Mitchell, G. A.; Gharib, J. J.; Doolittle, D. F.

2015-12-01

Methane gas flux from the seafloor to atmosphere is an important variable for global carbon cycle and climate models, yet is poorly constrained. Methodologies used to estimate seafloor gas flux commonly employ a combination of acoustic and optical techniques. These techniques often use hull-mounted multibeam echosounders (MBES) to quickly ensonify large volumes of the water column for acoustic backscatter anomalies indicative of gas bubble plumes. Detection of these water column anomalies with a MBES provides information on the lateral distribution of the plumes, the midwater dimensions of the plumes, and their positions on the seafloor. Seafloor plume locations are targeted for visual investigations using a remotely operated vehicle (ROV) to determine bubble emission rates, venting behaviors, bubble sizes, and ascent velocities. Once these variables are measured in-situ, an extrapolation of gas flux is made over the survey area using the number of remotely-mapped flares. This methodology was applied to a geophysical survey conducted in 2013 over a large seafloor crater that developed in response to an oil well blowout in 1983 offshore Papua New Guinea. The site was investigated by multibeam and sidescan mapping, sub-bottom profiling, 2-D high-resolution multi-channel seismic reflection, and ROV video and coring operations. Numerous water column plumes were detected in the data suggesting vigorously active vents within and near the seafloor crater (Figure 1). This study uses dual-frequency MBES datasets (Reson 7125, 200/400 kHz) and ROV video imagery of the active hydrocarbon seeps to estimate total gas flux from the crater. Plumes of bubbles were extracted from the water column data using threshold filtering techniques. Analysis of video images of the seep emission sites within the crater provided estimates on bubble size, expulsion frequency, and ascent velocity. The average gas flux characteristics made from ROV video observations is extrapolated over the number of individual flares detected acoustically and extracted to estimate gas flux from the survey area. The gas flux estimate from the water column filtering and ROV observations yields a range of 2.2 - 6.6 mol CH4 / min.

3D movies for teaching seafloor bathymetry, plate tectonics, and ocean circulation in large undergraduate classes

NASA Astrophysics Data System (ADS)

Peterson, C. D.; Lisiecki, L. E.; Gebbie, G.; Hamann, B.; Kellogg, L. H.; Kreylos, O.; Kronenberger, M.; Spero, H. J.; Streletz, G. J.; Weber, C.

2015-12-01

Geologic problems and datasets are often 3D or 4D in nature, yet projected onto a 2D surface such as a piece of paper or a projection screen. Reducing the dimensionality of data forces the reader to "fill in" that collapsed dimension in their minds, creating a cognitive challenge for the reader, especially new learners. Scientists and students can visualize and manipulate 3D datasets using the virtual reality software developed for the immersive, real-time interactive 3D environment at the KeckCAVES at UC Davis. The 3DVisualizer software (Billen et al., 2008) can also operate on a desktop machine to produce interactive 3D maps of earthquake epicenter locations and 3D bathymetric maps of the seafloor. With 3D projections of seafloor bathymetry and ocean circulation proxy datasets in a virtual reality environment, we can create visualizations of carbon isotope (δ13C) records for academic research and to aid in demonstrating thermohaline circulation in the classroom. Additionally, 3D visualization of seafloor bathymetry allows students to see features of seafloor most people cannot observe first-hand. To enhance lessons on mid-ocean ridges and ocean basin genesis, we have created movies of seafloor bathymetry for a large-enrollment undergraduate-level class, Introduction to Oceanography. In the past four quarters, students have enjoyed watching 3D movies, and in the fall quarter (2015), we will assess how well 3D movies enhance learning. The class will be split into two groups, one who learns about the Mid-Atlantic Ridge from diagrams and lecture, and the other who learns with a supplemental 3D visualization. Both groups will be asked "what does the seafloor look like?" before and after the Mid-Atlantic Ridge lesson. Then the whole class will watch the 3D movie and respond to an additional question, "did the 3D visualization enhance your understanding of the Mid-Atlantic Ridge?" with the opportunity to further elaborate on the effectiveness of the visualization.

Geologic Seafloor Mapping Defines Extensive Paleochannel Network Offshore of the Delmarva Peninsula, U.S.A: Implications for Mid-Atlantic Bight Evolution since the Pliocene

NASA Astrophysics Data System (ADS)

Brothers, L. L.; Foster, D. S.; Pendleton, E. A.; Thieler, E. R.; Baldwin, W. E.; Sweeney, E. M.

2017-12-01

Nearly 10,000 km of geophysical data and seafloor grab samples along with photo and video data from more than 200 seafloor stations are used to interpret seafloor and shallow subsurface geology on the Delmarva Peninsula's inner continental shelf. These USGS data are supplemented with existing National Oceanic Atmospheric Administration hydrographic survey data and Bureau of Ocean Energy Management Wind Energy Area seismic reflection profile data to support one of the most data-rich and extensive inner continental shelf studies on the U.S. Atlantic coast. Using chirp, multi-channel boomer and sparker seismic reflection profile data, we map an extensive paleochannel network from 500 meters to 30 kilometers offshore of the modern Delmarva coastline. Fluvial erosional surfaces relating to six sea-level lowstands are identified at two-way travel times between 0.01 and 0.12 ms. Paleochannels exhibit up to 30 meters of relief and the discrete complexes can be >25 kilometers wide. Based on areal distribution, stratigraphic relationships and amino acid dating results from earlier borehole studies, we interpret the infilled channels as Late Tertiary and Quaternary courses of the Delaware, Susquehanna, Potomac and York Rivers. Our study generates a detailed illustration of major river systems' paleochannel frequency, distribution and geometry and provides new insight into how coastal river systems evolve in low-gradient passive margins.

How has the Long Island Sound Seafloor Changed Over Time?

NASA Astrophysics Data System (ADS)

Mayo, E. C.; Nitsche, F. O.

2016-12-01

The present Long Island Sound (LIS) was mainly shaped by the last glaciation and the sea level transgression that followed. Today the LIS is an important ecosystem that provides a critical habitat to numerous plant and animal species, and is important to the stability of several economies including fishing, boating, and tourism. Determining where erosion, transportation and deposition of sediment is occurring is important for sustainable development in and around the sound. Calculating the rate of change of the seafloor, identifying the hot spots where the most change is occurring, and determining which processes impact the scale of change are important for preserving the economy and ecology that depend on the sound. This is especially true as larger and more frequent storms comparable to hurricane Sandy are anticipated due to climate change. We used older bathymetric data (collected 1990-2001 by the National Oceanic and Atmospheric Administration) and compared those with the more recently collected LIS bathymetric data covering the same areas (collected 2012-2014 by a collaborative LIS mapping project with NOAA, the States of New York and Connecticut). Using Geographic Information Systems (GIS) we analyzed and mapped the differences between these two datasets to determine where and by how much the seafloor has changed. The results show observable changes in the LIS seafloor on the scale of 1-2 meters over this 10-20 year period. The scale and type of these changes varies across the sound. The rates of change observed depends on the area of the sound, as each area has different factors to account for that controls sediment movement. We present results from five areas of the sound that had data from 1990-2001 and 2012-2014 and that highlight different key processes that change the seafloor. Observed changes in tidal inlets are mostly controlled by existing morphology and near shore sediment transport. In areas with strong bottom currents the data show migrating sediment dunes on the seafloor that moved up to several meters per year.

Cruise report; RV Coastal Surveyor Cruise C1-99; multibeam mapping of the Long Beach, California continental shelf; April 12 through May 19, 1999

USGS Publications Warehouse

Gardner, James V.; Hughes-Clarke, John E.; Mayer, Larry A.

1999-01-01

The greater Los Angeles area of California is home to more than 10 million people. This large population puts increased pressure on the adjacent offshore continental shelf and margin with activities such as ocean disposal for dredged spoils, explosive disposal, waste-water outfall, and commercial fishing. The increased utilization of the shelf and margin in this area has generated accelerated multi-disciplinary research efforts in all aspects of the environment of the coastal zone. Prior to 1996 there were no highly accurate base maps of the continental shelf and slope upon which the research activities could be located and monitored. In 1996, the United States Geological Survey (USGS) Pacific Seafloor Mapping Project began to address this problem by mapping the Santa Monica shelf and margin (Fig. 1) using a state-of-the-art, high-resolution multibeam sonar system (Gardner, et al., 1996; 1999). Additional seafloor mapping in 1998 provided coverage of the continental margin from south of Newport to the proximal San Pedro Basin northwest of Palos Verdes Peninsula (Gardner, et al., 1998) (Fig. 1). The mapping of the seafloor in the greater Los Angeles continental shelf and margin was completed with a 30-day mapping of the Long Beach shelf in April and May 1999, the subject of this report. The objective of Cruise C-1-99-SC was to completely map the broad continental shelf from the eastern end of the Palos Verdes Peninsula to the narrow shelf south of Newport Beach, from the break in slope at about 120-m isobath to the inner shelf at about the 10-m isobath. Mapping the Long Beach shelf was jointly funded by the U.S. Geological Survey and the County of Orange (CA) Sanitation District and was conducted under a Cooperative Agreement with the Ocean Mapping Group from the University of New Brunswick (OMG/UNB). The OMG/UNB contracted with C&C Technologies, Inc. of Lafayette, LA for use of the RV Coastal Surveyor and the latest evolution of high-resolution multibeam sonars, a dual Kongsberg Simrad EM3000D.

Seafloor Topographic Analysis in Staged Ocean Resource Exploration

NASA Astrophysics Data System (ADS)

Ikeda, M.; Okawa, M.; Osawa, K.; Kadoshima, K.; Asakawa, E.; Sumi, T.

2017-12-01

J-MARES (Research and Development Partnership for Next Generation Technology of Marine Resources Survey, JAPAN) has been designing a low-expense and high-efficiency exploration system for seafloor hydrothermal massive sulfide deposits in "Cross-ministerial Strategic Innovation Promotion Program (SIP)" granted by the Cabinet Office, Government of Japan since 2014. We designed a method to focus mineral deposit prospective area in multi-stages (the regional survey, semi-detail survey and detail survey) by extracted topographic features of some well-known seafloor massive sulfide deposits from seafloor topographic analysis using seafloor topographic data acquired by the bathymetric survey. We applied this procedure to an area of interest more than 100km x 100km over Okinawa Trough, including some known seafloor massive sulfide deposits. In Addition, we tried to create a three-dimensional model of seafloor topography by SfM (Structure from Motion) technique using multiple image data of Chimney distributed around well-known seafloor massive sulfide deposit taken with Hi-Vision camera mounted on ROV in detail survey such as geophysical exploration. Topographic features of Chimney was extracted by measuring created three-dimensional model. As the result, it was possible to estimate shape of seafloor sulfide such as Chimney to be mined by three-dimensional model created from image data taken with camera mounted on ROV. In this presentation, we will discuss about focusing mineral deposit prospective area in multi-stages by seafloor topographic analysis using seafloor topographic data in exploration system for seafloor massive sulfide deposit and also discuss about three-dimensional model of seafloor topography created from seafloor image data taken with ROV.

High-resolution multibeam mapping and submersible surveys of topographic features in the northwestern Gulf of Mexico

USGS Publications Warehouse

Hickerson, E.L.; Schmahl, G.P.; Weaver, D.C.; Gardner, J.V.

2003-01-01

The Flower Garden Banks National Marine Sanctuary (FGBNMS) and the USGS Pacific Seafloor Mapping Project mapped about 2000 km2 of the northwestern Gulf of Mexico continental shelf during June 2002, using a Kongsberg Simrad EM1000 multibeam echosounder. Mapping focused on select topographic highs thave hae been idetnnfied as biological features warranting protection from oil and gas activities by the Minerals Management Service (MMS). The base maps will be used for all future ROV and submersible missions.

Advances in Shallow-Water, High-Resolution Seafloor Mapping: Integrating an Autonomous Surface Vessel (ASV) Into Nearshore Geophysical Studies

NASA Astrophysics Data System (ADS)

Denny, J. F.; O'Brien, T. F.; Bergeron, E.; Twichell, D.; Worley, C. R.; Danforth, W. W.; Andrews, B. A.; Irwin, B.

2006-12-01

The U.S. Geological Survey (USGS) has been heavily involved in geological mapping of the seafloor since the 1970s. Early mapping efforts such as GLORIA provided broad-scale imagery of deep waters (depths > 400 meters) within the Exclusive Economic Zone (EEZ). In the early 1990's, the USGS research emphasis shifted from deep- to shallow-water environments (inner continental shelf, nearshore, estuaries) to address pertinent coastal issues such as erosion, sediment availability, sediment transport, vulnerability of coastal areas to natural and anthropogenic hazards, and resource management. Geologic framework mapping in these shallow- water environments has provided valuable data used to 1) define modern sediment distribution and thickness, 2) determine underlying stratigraphic and structural controls on shoreline behavior, and 3) enable onshore-to- offshore geologic mapping within the coastal zone when coupled with subaerial techniques such as GPR and topographic LIDAR. Research in nearshore areas presents technological challenges due to the dynamics of the environment, high volume of data collected, and the geophysical limitations of operating in very shallow water. In 2004, the USGS, in collaboration with NOAA's Coastal Services Center, began a multi-year seafloor mapping effort to better define oyster habitats within Apalachicola Bay, Florida, a shallow water estuary along the northern Gulf of Mexico. The bay poses a technological challenge due to its shallow depths (< 4-m) and high turbidity that prohibits the use of bathymetric LIDAR. To address this extreme shallow water setting, the USGS incorporated an Autonomous Surface Vessel (ASV) into seafloor mapping operations, in June 2006. The ASV is configured with a chirp sub-bottom profiler (4 24 kHz), dual-frequency chirp sidescan-sonar (100/500 kHz), single-beam echosounder (235 kHz), and forward-looking digital camera, and will be used to delineate the distribution and thickness of surficial sediment, presence of oyster beds, and sea bed morphology in water depths less than 5-m. The ASV is a catamaran-based platform, 10 feet in length, 4 feet in width, and approximately 260 lbs in weight. The vehicle is operated remotely through a wireless modem network enabling real-time monitoring of data acquisition. The ASV is navigated using RTK, and heave, pitch and roll are recorded with onboard motion sensors. Additional sensors, such as ADCPs, can also be housed within the vehicle. The ASV is able to operate in previously inaccessible areas, and will not only augment existing shallow-water research capabilities, but will also improve our understanding of the geologic controls to modern beach behavior and coastal evolution.

Oregon OCS seafloor mapping: Selected lease blocks relevant to renewable energy

USGS Publications Warehouse

Cochrane, Guy R.; Hemery, Lenaïg G.; Henkel, Sarah K.

2017-05-23

In 2014 the U.S. Geological Survey (USGS) and the Bureau of Ocean Energy Management (BOEM) entered into Intra-agency agreement M13PG00037 to map an area of the Oregon Outer Continental Shelf (OCS) off of Coos Bay, Oregon, under consideration for development of a floating wind energy farm. The BOEM requires seafloor mapping and site characterization studies in order to evaluate the impact of seafloor and sub-seafloor conditions on the installation, operation, and structural integrity of proposed renewable energy projects, as well as to assess the potential effects of construction and operations on archaeological resources. The mission of the USGS is to provide geologic, topographic, and hydrologic information that contributes to the wise management of the Nation's natural resources and that promotes the health, safety, and well being of the people. This information consists of maps, databases, and descriptions and analyses of the water, energy, and mineral resources, land surface, underlying geologic structure, and dynamic processes of the earth.For the Oregon OCS study, the USGS acquired multibeam echo sounder and seafloor video data surrounding the proposed development site, which is 95 km2 in area and 15 miles offshore from Coos Bay. The development site had been surveyed by Solmar Hydro Inc. in 2013 under a contract with WindFloat Pacific. The USGS subsequently produced a bathymetry digital elevation model and a backscatter intensity grid that were merged with existing data collected by the contractor. The merged grids were published along with visual observations of benthic geo-habitat from the video data in an associated USGS data release (Cochrane and others, 2015).This report includes the results of analysis of the video data conducted by Oregon State University and the geo-habitat interpretation of the multibeam echo sounder (MBES) data conducted by the USGS. MBES data was published in Cochrane and others (2015). Interpretive data associated with this publication is published in Cochrane (2017). All the data is provided as geographic information system (GIS) files that contain both Esri ArcGIS geotiffs or shapefiles. For those who do not own the full suite of Esri GIS and mapping software, the data can be read using Esri ArcReader, a free viewer that is available at http://www.esri.com/software/arcgis/arcreader/index.html (last accessed August 29, 2016). Web services, which consist of standard implementations of ArcGIS representational state transfer (REST) Service and Open Geospatial Consortium (OGC) GIS web map service (WMS), also are available for all published GIS data. Web services were created using an ArcGIS service definition file, resulting in data layers that are symbolized as shown on the associated report figures. Both the ArcGIS REST Service and OGC WMS Service include all the individual GIS layers. Data layers are bundled together in a map-area web service; however, each layer can be symbolized and accessed individually after the web service is ingested into a desktop application or web map. Web services enable users to download and view data, as well as to easily add data to their own workflows, using any browser-enabled, standalone or mobile device.Though the surficial substrate is dominated by combinations of mud and sand substrate, a diverse assortment of geomorphologic features are related to geologic processes—one anticlinal ridge where bedrock is exposed, a slump and associated scarps, and pockmarks. Pockmarks are seen in the form of fields of small pockmarks, a lineation of large pockmarks with methanogenic carbonates, and areas of large pockmarks that have merged into larger variously shaped depressions. The slump appears to have originated at the pockmark lineation. Video-supervised numerical analysis of the MBES backscatter intensity data and vector ruggedness derived from the MBES bathymetry data was used to produce a substrate model called a seafloor character raster for the study area. The seafloor character raster consists of three substrate classes: soft-flat areas, hard-flat areas, and hard-rugged areas. A Coastal and Marine Ecological Classification Standard (CMECS) geoform and substrate map was also produced using depth, slope, and benthic position index classes to delineate geoform boundaries. Seven geoforms were identified in this process, including ridges, slump scars, slump deposits, basins, and pockmarks.Statistical analysis of the video data for correlations between substrate, depth, and invertebrate assemblages resulted in the identification of seven biomes: three hard-bottom biomes and four softbottom biomes. A similar analysis of vertebrate observations produces a similar set of biomes. The biome between-group dissimilarity was very high or high. Invertebrates alone represent most of the structure of the whole benthic community into different assemblages. A biotope map was generated using the seafloor character raster and the substrate and depth values of the biomes. Hard substrate biotopes were small in size and were located primarily on the ridge and in pockmarks along the pockmark lineation. The soft-bottom bitopes consisted of large contiguous areas delimited by isobaths.

Near-Seafloor Magnetic Exploration of Submarine Hydrothermal Systems in the Kermadec Arc

NASA Astrophysics Data System (ADS)

Caratori Tontini, F.; de Ronde, C. E. J.; Tivey, M.; Kinsey, J. C.

2014-12-01

Magnetic data can provide important information about hydrothermal systems because hydrothermal alteration can drastically reduce the magnetization of the host volcanic rocks. Near-seafloor data (≤70 m altitude) are required to map hydrothermal systems in detail; Autonomous Underwater Vehicles (AUVs) are the ideal platform to provide this level of resolution. Here, we show the results of high-resolution magnetic surveys by the ABE and Sentry AUVs for selected submarine volcanoes of the Kermadec arc. 3-D magnetization models derived from the inversion of magnetic data, when combined with high resolution seafloor bathymetry derived from multibeam surveys, provide important constraints on the subseafloor geometry of hydrothermal upflow zones and the structural control on the development of seafloor hydrothermal vent sites as well as being a tool for the discovery of previously unknown hydrothermal sites. Significant differences exist between the magnetic expressions of hydrothermal sites at caldera volcanoes ("donut" pattern) and cones ("Swiss cheese" pattern), respectively. Subseafloor 3-D magnetization models also highlight structural differences between focused and diffuse vent sites.

Seafloor studies of Mamala Bay, Honolulu, Hawaii

USGS Publications Warehouse

Torresan, Michael E.

No comprehensive study of the effects of disposal of dredge spoils has been conducted to determine if the environment has suffered. The U.S. Army Corps of Engineers (USACE) has regularly dredged the shipping channels of Honolulu Harbor and Pearl Harbor for commercial and military purposes. The 5-year frequency for new dredging activity has led to the formation of extensive offshore wide deposits of relatively coarse sediments being created in a sedimentary environment that naturally collects much finer-grained materials. At the same time, the rapid growth of Honolulu and its suburban region over the past 3 decades has added nutrient-enriched sewage outfall to the artificially-heavy sediment load. The combined effects of dredge-spoil disposal and contaminant loads are not well-documented, and are poorly understood. The U.S. Geological Survey (USGS) began a comprehensive study to characterize the seafloor of Mamala Bay.In 1993, the USGS initiated a program sponsored by the USACE and the U.S. Environmental Protection Agency that produced a detailed map of the seafloor, especially of the distribution of dredge spoils, and a preliminary analysis of the environmental effects of dredge-spoils disposal and the chemical effects of the introduction of nutrient-rich outfall. Part of the work would involve sediment sampling, biological testing, and evaluation. Of particular interest is tissue sampling and analysis of endemic shrimp to determine the rates of absorption of toxic elements, such as heavy metals, that are easily brought into the food chain.

Seafloor terrain analysis and geomorphology of the greater Los Angeles Margin and San Pedro Basin, Southern California

USGS Publications Warehouse

Dartnell, P.; Gardner, J.V.

2009-01-01

The seafloor off greater Los Angeles, California, has been extensively studied for the past century. Terrain analysis of recently compiled multibeam bathymetry reveals the detailed seafloor morphology along the Los Angeles Margin and San Pedro Basin. The terrain analysis uses the multibeam bathymetry to calculate two seafloor indices, a seafloor slope, and a Topographic Position Index. The derived grids along with depth are analyzed in a hierarchical, decision-tree classification to delineate six seafloor provinces-high-relief shelf, low-relief shelf, steep-basin slope, gentle-basin slope, gullies and canyons, and basins. Rock outcrops protrude in places above the generally smooth continental shelf. Gullies incise the steep-basin slopes, and some submarine canyons extend from the coastline to the basin floor. San Pedro Basin is separated from the Santa Monica Basin to the north by a ridge consisting of the Redondo Knoll and the Redondo Submarine Canyon delta. An 865-m-deep sill separates the two basins. Water depths of San Pedro Basin are ??100 m deeper than those in the San Diego Trough to the south, and three passes breach a ridge that separates the San Pedro Basin from the San Diego Trough. Information gained from this study can be used as base maps for such future studies as tectonic reconstructions, identifying sedimentary processes, tracking pollution transport, and defining benthic habitats. ?? 2009 The Geological Society of America.

Aerospace technology can be applied to exploration 'back on earth'. [offshore petroleum resources

NASA Technical Reports Server (NTRS)

Jaffe, L. D.

1977-01-01

Applications of aerospace technology to petroleum exploration are described. Attention is given to seismic reflection techniques, sea-floor mapping, remote geochemical sensing, improved drilling methods and down-hole acoustic concepts, such as down-hole seismic tomography. The seismic reflection techniques include monitoring of swept-frequency explosive or solid-propellant seismic sources, as well as aerial seismic surveys. Telemetry and processing of seismic data may also be performed through use of aerospace technology. Sea-floor sonor imaging and a computer-aided system of geologic analogies for petroleum exploration are also considered.

High-Resolution Seafloor Mapping at A Deep-Sea Methane Seep Field with an Autonomous Underwater Vehicle

NASA Astrophysics Data System (ADS)

Skarke, A. D.

2017-12-01

A growing body of research indicates that points of seafloor gas emission, known as cold-seeps, are a common feature along many continental margins. Results from recent exploration efforts show that benthic environments at cold-seeps are characterized by extensive authigenic carbonate crusts and complex chemosynthetic communities. The seafloor morphology and geophysical properties of these locations are heterogeneous and relatively complex due to the three-dimensional structure created by carbonate buildups and dense bivalve beds. Seeps are often found clustered and the spatial extent of associated seafloor crusts and beds can reach multiple square kilometers. Here, the results of a 1.25 km2 autonomous underwater vehicle (AUV) survey of a deep-sea methane seep field with 13 vents, at a nominal depth of 1400 m, located near Veatch Canyon on the US Atlantic margin are presented. Multibeam sonar, sidescan sonar, and a sub bottom profiler on the AUV were used to make high-resolution observations of seafloor bathymetry (resolution 1m2) as well as water column, seafloor, and subsurface acoustic backscatter intensity. Additionally, a downward oriented camera was used to collect seafloor imagery coincident with acoustic observations at select locations. Acoustic results indicated the location of discrete gas plumes as well as a continuous area of elevated seafloor roughness and backscatter intensity consistent with the presence of large scale authigenic rock outcrops and extensive mussel beds, which were visually confirmed with camera imagery. Additionally, a linear area of particularly elevated seafloor roughness and acoustic backscatter intensity that lies sub-parallel to an adjacent ridge was interpreted to be controlled by underlying geologic processes such as soft sediment faulting. Automated analysis of camera imagery and coincident acoustic backscatter and bathymetry data as well as derivative metrics (e.g. slope and rugosity) was used to segment and classify bed type (carbonate rock, sediment, mussel bed), yielding insight into geologic and ecological processes within the seep field study area.

Improved Detection and Mapping of Deepwater Hydrocarbon Seeps: Optimizing Acquisition and Processing Parameters for Marine Seep Hunting

NASA Astrophysics Data System (ADS)

Mitchell, G. A.; Orange, D.; Gharib, J. J.; Saade, E. J.; Joye, S. B.

2016-12-01

Marine seep hunting surveys are a current focus of hydrocarbon exploration due to recent advances in offshore geophysical and geochemical technologies. Hydrocarbon seeps are ephemeral, small, discrete, and often difficult to sample on the deep seafloor. Low to mid-frequency multibeam echosounders (MBES) are an ideal exploration tool to remotely locate and map seafloor features associated with seepage. Geophysical signatures from hydrocarbon seeps are evident in bathymetric datasets (fluid expulsion features), seafloor backscatter datasets (carbonate outcrops, gassy sediments, methane hydrate deposits), and midwater backscatter datasets (gas bubble and oil droplet plumes). Interpretation of these geophysical seep signatures in backscatter datasets is a fundamental component in seep hunting. Degradation of backscatter datasets resulting from environmental, geometric, and system noise can interfere with the detection and delineation of seeps. We present a backscatter intensity normalization method and a 2X acquisition technique that can enhance the geologic resolvability within backscatter datasets and assist in interpretation and characterization of seeps. We use GC600 in the Northern Gulf of Mexico as a seep calibration site for a Kongsberg EM302 30 kHz MBES prior to the start of the Gigante seep hunting survey. We analyze the results of a backscatter intensity normalization, assess the effectiveness of 2X seafloor coverage in resolving geologic features in backscatter data, and determine off-nadir detection limits of bubble plumes. GC600's location and robust venting make it a natural laboratory in which to study natural hydrocarbon seepage. The site has been the focus of several near-seafloor surveys as well as in-situ studies using advanced deepwater technologies analyzing fluid flux and composition. These datasets allow for ground-truthing of our remote backscatter measurements prior to commencing exploration within the frontier regions of the Southern Gulf of Mexico and Caribbean Sea. Our study shows that a comprehensive multibeam calibration involving bathymetric difference grids, a seafloor backscatter intensity normalization, a 2X acquisition survey technique, and processing with multiple processing packages can improve resolvability of seep features and interpretation.

The 2006 Pingtung Earthquake Doublet Triggered Seafloor Liquefaction: Revisiting the Evidence with Ultra-High-Resolution Seafloor Mapping

NASA Astrophysics Data System (ADS)

Su, C. C.; Chen, T. T.; Paull, C. K.; Gwiazda, R.; Chen, Y. H.; Lundsten, E. M.; Caress, D. W.; Hsu, H. H.; Liu, C. S.

2017-12-01

Since Heezen and Ewing's (1952) classic work on the 1929 Grand Banks earthquake, the damage of submarine cables have provided critical information on the nature of seafloor mass movements or sediment density flows. However, the understanding of the local conditions that lead to particular seafloor failures earthquakes trigger is still unclear. The Decemeber 26, 2006 Pingtung earthquake doublet which occurred offshore of Fangliao Township, southwestern Taiwan damaged 14 submarine cables between Gaoping slope to the northern terminus of the Manila Trench. Local fisherman reported disturbed waters at the head of the Fangliao submarine canyon, which lead to conjectures that eruptions of mud volcanoes which are common off the southwestern Taiwan. Geophysical survey were conducted to evaluate this area which revealed a series of faults, liquefied strata, pockmarks and acoustically transparent sediments with doming structures which may relate to the submarine groundwater discharge. Moreover, shipboard multi-beam bathymetric survey which was conducted at the east of Fangliao submarine canyon head shows over 10 km2 area with maximum depth around 40 m of seafloor subsidence after Pingtung earthquake. The north end of the subsidence is connected to the Fangliao submarine canyon where the first cable failed after Pingtung earthquake. The evidences suggests the earthquake triggered widespeard liquefaction and generated debris flows within Fangliao submarine canyon. In May 2017, an IONTU-MBARI Joint Survey Cruise (OR1-1163) was conducted on using MBARI Mapping AUV and miniROV to revisit the area where the cable damaged after Pingtung earthquake. From newly collected ultra-high-resolution (1-m lateral resolution) bathymetry data, the stair-stepped morphology is observed at the edge of canyon. The comet-shaped depressions are located along the main headwall of the seafloor failure. The new detailed bathymetry reveal details which suggest Fangliao submarine canyon head is preconditioned to failure. Submarine groundwater discharge from the Pingtung Plain and the southern tip of the Central Mountains is inferred to generate elevated pore pressures leaving the area susceptible to liquefaction and failure when triggered by earthquakes.

Sea-floor texture and physiographic zones of the inner continental shelf from Salisbury to Nahant, Massachusetts, including the Merrimack Embayment and Western Massachusetts Bay

USGS Publications Warehouse

Pendleton, Elizabeth E.; Barnhardt, Walter A.; Baldwin, Wayne E.; Foster, David S.; Schwab, William C.; Andrews, Brian D.; Ackerman, Seth D.

2015-10-26

A series of maps that describe the distribution and texture of sea-floor sediments and physiographic zones of Massachusetts State waters from Nahant to Salisbury, Massachusetts, including western Massachusetts Bay, have been produced by using high-resolution geophysical data (interferometric and multibeam swath bathymetry, lidar bathymetry, backscatter intensity, and seismic reflection profiles), sediment samples, and bottom photographs. These interpretations are intended to aid statewide efforts to inventory and manage coastal and marine resources, link with existing data interpretations, and provide information for research focused on coastal evolution and environmental change. Marine geologic mapping of the inner continental shelf of Massachusetts is a statewide cooperative effort of the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management.

New seafloor map of the Puerto Rico trench helps assess earthquake and tsunami hazards

NASA Astrophysics Data System (ADS)

Brink, Uri ten; Danforth, William; Polloni, Christopher; Andrews, Brian; Llanes, Pilar; Smith, Shepard; Parker, Eugene; Uozumi, Toshihiko

2004-09-01

The Puerto Rico Trench, the deepest part of the Atlantic Ocean, is located where the North American (NOAM) plate is subducting under the Caribbean plate (Figure l). The trench region may pose significant seismic and tsunami hazards to Puerto Rico and the U.S.Virgin Islands, where 4 million U.S. citizens reside. Widespread damage in Puerto Rico and Hispaniola from an earthquake in 1787 was estimated to be the result of a magnitude 8 earthquake north of the islands [McCann et al., 2004]. A tsunami killed 40 people in NW Puerto Rico following a magnitude 7.3 earthquake in 1918 [Mercado and McCann, 1998]. Large landslide escarpments have been mapped on the seafloor north of Puerto Rico [Mercado et al., 2002; Schwab et al., 1991],although their ages are unknown.

New seafloor map of the Puerto Rico Trench helps assess earthquake and tsunami hazards

USGS Publications Warehouse

ten Brink, Uri S.; Danforth, William; Polloni, Christopher; Andrews, Brian D.; Llanes Estrada, Pilar; Smith, Shepard; Parker, Eugene; Uozumi, Toshihiko

2004-01-01

The Puerto Rico Trench, the deepest part of the Atlantic Ocean, is located where the North American (NOAM) plate is subducting under the Caribbean plate (Figure l). The trench region may pose significant seismic and tsunami hazards to Puerto Rico and the U.S.Virgin Islands, where 4 million U.S. citizens reside. Widespread damage in Puerto Rico and Hispaniola from an earthquake in 1787 was estimated to be the result of a magnitude 8 earthquake north of the islands [McCann et al., 2004]. A tsunami killed 40 people in NW Puerto Rico following a magnitude 7.3 earthquake in 1918 [Mercado and McCann, 1998]. Large landslide escarpments have been mapped on the seafloor north of Puerto Rico [Mercado et al., 2002; Schwab et al., 1991],although their ages are unknown.

New High-Resolution Multibeam Mapping and Seismic Reflection Imaging of Mudflows on the Mississippi River Delta Front

NASA Astrophysics Data System (ADS)

Chaytor, J. D.; Baldwin, W. E.; Danforth, W. W.; Bentley, S. J.; Miner, M. D.; Damour, M.

2017-12-01

Mudflows (channelized and unconfined debris flows) on the Mississippi River Delta Front (MRDF) are a recognized hazard to oil and gas infrastructure in the shallow Gulf of Mexico. Preconditioning of the seafloor for failure results from high sedimentation rates coupled with slope over-steepening, under-consolidation, and abundant biogenic gas production. Cyclical loading of the seafloor by waves from passing major storms appears to be a primary trigger, but the role of smaller (more frequent) storms and background oceanographic processes are largely unconstrained. A pilot high-resolution seafloor mapping and seismic imaging study was carried out across portions of the MRDF aboard the R/V Point Sur from May 19-26, 2017, as part of a multi-agency/university effort to characterize mudflow hazards in the area. The primary objective of the cruise was to assess the suitability of seafloor mapping and shallow sub-surface imaging tools in the challenging environmental conditions found across delta fronts (e.g., variably-distributed water column stratification and wide-spread biogenic gas in the shallow sub-surface). More than 600 km of multibeam bathymetry/backscatter/water column data, 425 km of towed chirp data, and > 500 km of multi-channel seismic data (boomer/mini-sparker sources, 32-channel streamer) were collected. Varied mudflow (gully, lobe), pro-delta morphologies, and structural features, some of which have been surveyed more than once, were imaged in selected survey areas from Pass a Loutre to Southwest Pass. The present location of the SS Virginia, which has been moving with one of the mudflow lobes since it was sunk in 1942, was determined and found to be 60 m SW of its 2006 position, suggesting movement not linked to hurricane-induced wave triggering of mudflows. Preliminary versions these data were used to identify sediment sampling sites visited on a cruise in early June 2017 led by scientists from LSU and other university/agency partners.

Electromagnetic surveying of seafloor mounds in the northern Gulf of Mexico

USGS Publications Warehouse

Ellis, M.; Evans, R.L.; Hutchinson, D.; Hart, P.; Gardner, J.; Hagen, R.

2008-01-01

Seafloor controlled source electromagnetic data, probing the uppermost 30 m of seafloor sediments, have been collected with a towed magnetic dipole-dipole system across two seafloor mounds at approximately 1300 m water depth in the northern Gulf of Mexico. One of these mounds was the focus of??a recent gas hydrate research drilling program. Rather than the highly resistive response expected of massive gas hydrate within the confines of the mounds, the EM data are dominated by the effects of raised temperatures and pore fluid salinities that result in an electrically conductive seafloor. This structure suggests that fluid advection towards the seafloor is taking place beneath both mounds. Similar responses are seen at discrete locations away from the mounds in areas that might be associated with faults, further suggesting substantial shallow fluid circulation. Raised temperatures and salinities may inhibit gas hydrate formation at depth as has been suggested at other similar locations in the Gulf of Mexico. 

High-Resolution Geologic Mapping in the Eastern Manus Basin

NASA Astrophysics Data System (ADS)

Thal, J.; Bach, W.; Tivey, M.; Yoerger, D. R.

2011-12-01

AUV-based microbathymetry combined with ROV video data was used to create the first high-resolution geologic maps of two hydrothermal active areas in the eastern Manus Basin: North Su volcano and PACManus hydrothermal field on Pual Ridge. The data were recorded in 2006 and 2011 during the research cruises Magellan-06 operated by the Woods Hole Oceanographic Institution and BAMBUS (SO-216) operated by MARUM / University Bremen. High accuracy underwater navigation transponder-based and Posidonia systems allowed us to combine video data with bathymetry. The navigation on both cruises was very precise (m-scale) and navigation offsets were less than 10 m. We conducted detailed geologic mapping and sampling to identify the seafloor volcanic and hydrothermal features and created highly detailed maps that provide a comprehensive picture of the seafloor and vent distribution in the eastern Manus Basin. Several different types of dacite lava morphology were mapped, including pillow lava, lobate flows and massive block lava. We have compiled all available information on rock chemistry, fluid and temperature measurements, video data, bathymetry and navigation data into a GIS database. We find that, in contrast to the tectonic control on vent distribution at slow spreading mid-ocean ridges, the pathways of upwelling hydrothermal vent fluids at PACManus are dominated by volcanic features, such as lava domes and thick, massive block lava flows. Vent fields are developed preferentially along the margins of major flow units, probably because the cores of these units are impermeable to fluid flow, while the autobrecciated outer parts of the flows are not. In the North Su area, a comparison of seafloor maps from 2006 and 2011 reveals recent volcanic activity, which has strongly modified the bathymetry and hydrothermal vent distribution on the southern flank of the volcano. An ash cone with multiple small craters on the SW flank of the North-Su volcano that didn't exist in 2006 was mapped in 2011. Also, magmatic degassing was much more vigorous in 2011, with large accumulations of liquid sulfur (from disproportionation of magmatic SO2) as well as extensive bubbling of supercritical and liquid CO2.

Small Moves, NUI. Small Moves: Beginning to Investigate Biogeochemical Exchange From the Seafloor to the Exterior of an Ice-Covered Ocean

NASA Astrophysics Data System (ADS)

German, C. R.; Boetius, A.

2017-12-01

We present results from two recent cruises, using the new Nereid Under Ice (NUI) vehicle aboard the FS Polarstern, in which we investigated biogeochemical fluxes from the deep seafloor of the Gakkel Ridge, an ultraslow spreading ridge that spans the ice-covered Arctic Ocean, and the mechanisms by which biogeochemical signals might be transferred from within the underlying ocean to the overlying Arctic ice. The scientific advances for this work progress hand in hand with technological capability. During a first cruise in 2014, our NUI-based investigations focused on photosynthetically-driven biogeochemical cycling in the uppermost water column and how to study such processes using in situ sensing immediately at and beneath the rough topography of the overlying ice-cover. For that work we relied entirely upon human-in-the-loop control of the vehicle via a single optical fiber light tether than provided real-time monitoring and control of the vehicle as it ranged laterally out under the ice up to 1km distant from the ship, conducting physical, geochemical and biological surveys. Instrumentation used for that work included multibeam mapping and imaging (digital still photographs and HD video), in situ spectroscopy to study light transmission through the ice and biogeochemical mapping of the ocean water column using a combination of CTD sensing, fluorometry and an in situ nitrate analyzer. Returning to the Arctic in 2016 we extended our exploration modes with NUI further, investigating for seafloor fluid flow at a shallow setting on the flanks of the Gakkel Ridge where the seabed rises from >4000m to <600m depth. In AUV mode, NUI conducted water column sensing using CTD, optical backscatter and Eh sensors and seafloor surveys using high resolution multibeam bathymetry and stereoscopic seafloor imaging. In subsequent ROV operations, NUI was used to conduct detailed investigation of seabed biological communities. This included targeted sampling of individual organisms and ecosystems at precise locations at the seabed completely decoupled from the movement of the ship (horizontal displacements of 1km or more) at the ice-covered ocean surface. While the existing NUI vehicle does not map directly to model payloads for future SLS missions to Europa or Enceladus it does provide for important small moves in the right direction.

Human Activities on the Deep Seafloor in the North East Atlantic: An Assessment of Spatial Extent

PubMed Central

Benn, Angela R.; Weaver, Philip P.; Billet, David S. M.; van den Hove, Sybille; Murdock, Andrew P.; Doneghan, Gemma B.; Le Bas, Tim

2010-01-01

Background Environmental impacts of human activities on the deep seafloor are of increasing concern. While activities within waters shallower than 200 m have been the focus of previous assessments of anthropogenic impacts, no study has quantified the extent of individual activities or determined the relative severity of each type of impact in the deep sea. Methodology The OSPAR maritime area of the North East Atlantic was chosen for the study because it is considered to be one of the most heavily impacted by human activities. In addition, it was assumed data would be accessible and comprehensive. Using the available data we map and estimate the spatial extent of five major human activities in the North East Atlantic that impact the deep seafloor: submarine communication cables, marine scientific research, oil and gas industry, bottom trawling and the historical dumping of radioactive waste, munitions and chemical weapons. It was not possible to map military activities. The extent of each activity has been quantified for a single year, 2005. Principal Findings Human activities on the deep seafloor of the OSPAR area of the North Atlantic are significant but their footprints vary. Some activities have an immediate impact after which seafloor communities could re-establish, while others can continue to make an impact for many years and the impact could extend far beyond the physical disturbance. The spatial extent of waste disposal, telecommunication cables, the hydrocarbon industry and marine research activities is relatively small. The extent of bottom trawling is very significant and, even on the lowest possible estimates, is an order of magnitude greater than the total extent of all the other activities. Conclusions/Significance To meet future ecosystem-based management and governance objectives for the deep sea significant improvements are required in data collection and availability as well as a greater awareness of the relative impact of each human activity. PMID:20856885

Human activities on the deep seafloor in the North East Atlantic: an assessment of spatial extent.

PubMed

Benn, Angela R; Weaver, Philip P; Billet, David S M; van den Hove, Sybille; Murdock, Andrew P; Doneghan, Gemma B; Le Bas, Tim

2010-09-13

Environmental impacts of human activities on the deep seafloor are of increasing concern. While activities within waters shallower than 200 m have been the focus of previous assessments of anthropogenic impacts, no study has quantified the extent of individual activities or determined the relative severity of each type of impact in the deep sea. The OSPAR maritime area of the North East Atlantic was chosen for the study because it is considered to be one of the most heavily impacted by human activities. In addition, it was assumed data would be accessible and comprehensive. Using the available data we map and estimate the spatial extent of five major human activities in the North East Atlantic that impact the deep seafloor: submarine communication cables, marine scientific research, oil and gas industry, bottom trawling and the historical dumping of radioactive waste, munitions and chemical weapons. It was not possible to map military activities. The extent of each activity has been quantified for a single year, 2005. Human activities on the deep seafloor of the OSPAR area of the North Atlantic are significant but their footprints vary. Some activities have an immediate impact after which seafloor communities could re-establish, while others can continue to make an impact for many years and the impact could extend far beyond the physical disturbance. The spatial extent of waste disposal, telecommunication cables, the hydrocarbon industry and marine research activities is relatively small. The extent of bottom trawling is very significant and, even on the lowest possible estimates, is an order of magnitude greater than the total extent of all the other activities. To meet future ecosystem-based management and governance objectives for the deep sea significant improvements are required in data collection and availability as well as a greater awareness of the relative impact of each human activity.

Shallow Investigations of the Deep Seafloor: Quantitative Morphology in the Levant Basin, Eastern Mediterranean

NASA Astrophysics Data System (ADS)

Kanari, M.; Ketter, T.; Tibor, G.; Schattner, U.

2017-12-01

We aim to characterize the seafloor morphology and its shallow sub-surface structures and deformations in the deep part of the Levant basin (eastern Mediterranean) using recently acquired high-resolution shallow seismic reflection data and multibeam bathymetry, which allow quantitative analysis of morphology and structure. The Levant basin at the eastern Mediterranean is considered a passive continental margin, where most of the recent geological processes were related in literature to salt tectonics rooted at the Messinian deposits from 6Ma. We analyzed two sets of recently acquired high-resolution data from multibeam bathymetry and 3.5 kHz Chirp sub-bottom seismic reflection in the deep basin of the continental shelf offshore Israel (water depths up to 2100 m). Semi-automatic mapping of seafloor features and seismic data interpretation resulted in quantitative morphological analysis of the seafloor and its underlying sediment with penetration depth up to 60 m. The quantitative analysis and its interpretation are still in progress. Preliminary results reveal distinct morphologies of four major elements: channels, faults, folds and sediment waves, validated by seismic data. From the spatial distribution and orientation analyses of these phenomena, we identify two primary process types which dominate the formation of the seafloor in the Levant basin: structural and sedimentary. Characterization of the geological and geomorphological processes forming the seafloor helps to better understand the transport mechanisms and the relations between sediment transport and deposition in deep water and the shallower parts of the shelf and slope.

Seafloor video footage and still-frame grabs from U.S. Geological Survey cruises in Hawaiian nearshore waters

USGS Publications Warehouse

Gibbs, Ann E.; Cochran, Susan A.; Tierney, Peter W.

2013-01-01

Underwater video footage was collected in nearshore waters (<60-meter depth) off the Hawaiian Islands from 2002 to 2011 as part of the U.S. Geological Survey (USGS) Coastal and Marine Geology Program's Pacific Coral Reef Project, to improve seafloor characterization and for the development and ground-truthing of benthic-habitat maps. This report includes nearly 53 hours of digital underwater video footage collected during four USGS cruises and more than 10,200 still images extracted from the videos, including still frames from every 10 seconds along transect lines, and still frames showing both an overview and a near-bottom view from fixed stations. Environmental Systems Research Institute (ESRI) shapefiles of individual video and still-image locations, and Google Earth kml files with explanatory text and links to the video and still images, are included. This report documents the various camera systems and methods used to collect the videos, and the techniques and software used to convert the analog video tapes into digital data in order to process the images for optimum viewing and to extract the still images, along with a brief summary of each survey cruise.

Two different electrical properties can improve transoceanic cable-route mapping

USGS Publications Warehouse

Wynn, J.; McGinnis, T.

2001-01-01

Induced polarization (IP) measurements made in the marine environment were investigated to map and remotely characterize the top 6-10 meters of the seafloor. The continuous resistivity profiling with cone-penetrometer tests, providing important information to engineers planning transoceanic cable routes, was also described. The IP effect and resistivity were identified as the two electric properties to improve transoceanic cable-route mapping. The measurement of IP and resistivity was found to depend on electrical current.

A predictive numerical model for potential mapping of the gas hydrate stability zone in the Gulf of Cadiz

NASA Astrophysics Data System (ADS)

Leon, R.; Somoza, L.

2009-04-01

This comunication presents a computational model for mapping the regional 3D distribution in which seafloor gas hydrates would be stable, that is carried out in a Geographical Information System (GIS) environment. The construction of the model is comprised of three primary steps, namely (1) the construction of surfaces for the various variables based on available 3D data (seafloor temperature, geothermal gradient and depth-pressure); (2) the calculation of the gas function equilibrium functions for the various hydrocarbon compositions reported from hydrate and sediment samples; and (3) the calculation of the thickness of the hydrate stability zone. The solution is based on a transcendental function, which is solved iteratively in a GIS environment. The model has been applied in the northernmost continental slope of the Gulf of Cadiz, an area where an abundant supply for hydrate formation, such as extensive hydrocarbon seeps, diapirs and fault structures, is combined with deep undercurrents and a complex seafloor morphology. In the Gulf of Cadiz, model depicts the distribution of the base of the gas hydrate stability zone for both biogenic and thermogenic gas compositions, and explains the geometry and distribution of geological structures derived from gas venting in the Tasyo Field (Gulf of Cadiz) and the generation of BSR levels on the upper continental slope.

Shallow geology, sea-floor texture, and physiographic zones of Buzzards Bay, Massachusetts

USGS Publications Warehouse

Foster, David S.; Baldwin, Wayne E.; Barnhardt, Walter A.; Schwab, William C.; Ackerman, Seth D.; Andrews, Brian D.; Pendleton, Elizabeth A.

2015-01-07

Geologic, sediment texture, and physiographic zone maps characterize the sea floor of Buzzards Bay, Massachusetts. These maps were derived from interpretations of seismic-reflection profiles, high-resolution bathymetry, acoustic-backscatter intensity, bottom photographs, and surficial sediment samples. The interpretation of the seismic stratigraphy and mapping of glacial and Holocene marine units provided a foundation on which the surficial maps were created. This mapping is a result of a collaborative effort between the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management to characterize the surface and subsurface geologic framework offshore of Massachusetts.

Shallow geology, seafloor texture, and physiographic zones of the Inner Continental Shelf from Nahant to northern Cape Cod Bay, Massachusetts

USGS Publications Warehouse

Pendleton, Elizabeth A.; Baldwin, Wayne E.; Barnhardt, Walter A.; Ackerman, Seth D.; Foster, David S.; Andrews, Brian D.; Schwab, William C.

2013-01-01

The Massachusetts inner continental shelf between Nahant and northern Cape Cod Bay has been profoundly affected by the occupation and retreat of glacial ice sheets and relative sea-level change during the Quaternary. Marine geologic mapping of this area is a component of a statewide cooperative effort involving the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management. Interpretation of high-resolution geophysical data (interferometric and multibeam swath bathymetry, lidar, backscatter, and seismic reflection), sediment samples, and bottom photographs was used to produce a series of maps that describe the distribution and texture of seafloor sediments, shallow geologic framework, and physiographic zones of this inner-shelf region. These data and interpretations are intended to aid efforts to inventory and manage coastal and marine resources, and provide baseline information for research focused on coastal evolution and environmental change.

California State Waters Map Series: offshore of Bolinas, California

USGS Publications Warehouse

Cochrane, Guy R.; Dartnell, Peter; Johnson, Samuel Y.; Greene, H. Gary; Erdey, Mercedes D.; Golden, Nadine E.; Hartwell, Stephen R.; Manson, Michael W.; Sliter, Ray W.; Endris, Charles A.; Watt, Janet T.; Ross, Stephanie L.; Kvitek, Rikk G.; Phillips, Eleyne L.; Bruns, Terry R.; Chin, John L.; Cochrane, Guy R.; Cochran, Susan A.

2015-08-05

Seafloor habitats in the Offshore of Bolinas map area, which lies within the Shelf (continental shelf) megahabitat, range from, in the nearshore, sandy seafloor in the southeast and significant rocky outcrops that support kelp-forest communities in the northwest to, in deeper water, rocky-reef communities. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock in the northeast supports large forests of “bull kelp,” which is well adapted for high wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of greenling and rockfish.

New Explorer-class AUV Ready for Deep-water, High-resolution Habitat Mapping Studies

NASA Astrophysics Data System (ADS)

Potts, T. A.; Shepard, A.

2006-12-01

In 2002, a partnership was formed to design, construct, field test, and operate an Autonomous Underwater Vehicle (AUV) equipped to provide high-resolution (<1 m) maps of offshore seafloor habitats down to 2200 meters depth. An ISE Explorer-class AUV was constructed and equipped to conduct seafloor characterization via multi-beam EM2000 providing both bathymetry and backscatter. Three 10-day cruises will be conducted between August and November 2006 to put the vehicle through its paces and refine operating protocols. It is anticipated that the vehicle will log over 200 hours of bottom time and acquire over 30 GB of data at proposed marine protected area sites off North and South Carolina, Gray's Reef National Marine Sanctuary off Georgia, and at the Oculina Habitat Area of Particular Concern off the east coast of Florida. The AUV will begin supporting competitively reviewed science projects starting in 2007.

Towards a distributed infrastructure for research drilling in Europe

NASA Astrophysics Data System (ADS)

Mevel, C.; Gatliff, R.; Ludden, J.; Camoin, G.; Horsfield, B.; Kopf, A.

2012-04-01

The EC-funded project "Deep Sea and Sub-Seafloor Frontier" (DS3F) aims at developing seafloor and sub seafloor sampling strategies for enhanced understanding of deep-sea and sub seafloor processes by connecting marine research in life and geosciences, climate and environmental change, with socio-economic issues and policy building. DS3F has identified access to sub seafloor sampling and instrumentation as a key element of this approach. There is a strong expertise in Europe concerning direct access to the sub seafloor. Within the international program IODP (Integrated Ocean Drilling Program), ECORD (European Consortium for Ocean Research Drilling) has successfully developed the concept of mission specific platforms (MSPs), contracted on a project basis to drill in ice covered and shallow water areas. The ECORD Science Operator, lead by the British Geological Survey (BGS) has build a internationally recognized expertise in scientific ocean drilling, from coring in challenging environment, through down hole measurements and laboratory analysis to core curation and data management. MARUM, at the Bremen University in Germany, is one of the three IODP core repositories. Europe is also at the forefront of scientific seabed drills, with the MeBo developed by MARUM as well as the BGS seabed rocks drills. Europe also plays a important role in continental scientific drilling and the European component of ICDP (International Continental Scientific Drilling Program) is strengthening, with the recent addition of France and foreseen addition of UK. Oceanic and continental drilling have very similar scientific objectives. Moreover, they share not only common technologies, but also common data handling systems. To develop an integrated approach to technology development and usage, a move towards a a distributed infrastructure for research drilling in Europe has been initiated by these different groups. Built on existing research & operational groups across Europe, it will facilitate the sharing of technological and scientific expertise for the benefit of the science community. It will link with other relevant infrastructure initiatives such as EMSO (European Marine Seafloor Observatories). It will raise the profile of scientific drilling in Europe and hopefully lead to better funding opportunities.

Determination of the distribution of shallow-water seagrass and drift algae communities with acoustic seafloor discrimination.

PubMed

Riegl, B; Moyer, R P; Morris, L; Virnstein, R; Dodge, R E

2005-05-01

The spatial distribution of seagrass and algae communities can be difficult to determine in large, shallow lagoon systems where high turbidity prevents the use of optical methods like aerial photography or satellite imagery. Further complications can arise when algae are not permanently attached to the substratum and drift with tides and currents. A study using acoustic seafloor discrimination was conducted in the Indian River Lagoon (Florida, USA) to determine the extent of drift algae and seagrass. Acoustic surveys using the QTC View V system based on 50 and 200 kHz transducers were conducted near Sebastian Inlet. Results indicate that areas of seagrass can be identified, and are mixed with a high abundance of drift algae. Nearest-neighbor extrapolation was used to fill in spaces between survey lines and thus obtain spatially cohesive maps. These maps were then ground-truthed using data from towed video and compared using confusion matrices, The maps showed a high level of agreement (60%) with the actual distribution of algae, however some confusion existed between bare sand and algae as well as seagrass.

The shallow stratigraphy and sand resources offshore of the Mississippi Barrier Islands

USGS Publications Warehouse

Twichell, David; Pendleton, Elizabeth A.; Baldwin, Wayne; Foster, David; Flocks, James; Kelso, Kyle; DeWitt, Nancy; Pfeiffer, William; Forde, Arnell; Krick, Jason; Baehr, John

2011-01-01

Coastal Mississippi is protected by a series of barrier islands ranging in length from 10-25 kilometers that are less than 2 kilometers wide. The majority of these islands comprise the Gulf Islands National Seashore (GUIS), an ecologically diverse shoreline that provides habitat for wildlife including migratory birds and endangered animals. The majority of GUIS is submerged, and aquatic environments include dynamic tidal inlets, ebb-tide deltas, and seagrass beds. The islands are in a state of decline, with land areas severely reduced during the past century by storms, sea-level rise, and human alteration. Morton (2008) estimates that since the mid-1800s up to 64 percent of island surface area has been lost. Heavy damage was inflicted in 2005 by Hurricane Katrina, which passed by as a Category 3 storm and battered the islands with winds of more than 160 kilometers per hour and a storm surge up to 9 meters. Since 2007, the U.S. Geological Survey (USGS), in collaboration with the National Park Service, has been mapping the seafloor and substrate around the islands as part of the USGS Northern Gulf of Mexico Ecosystem Change and Hazard Susceptibility project. The purpose of these investigations is to characterize the near-surface stratigraphy and identify the influence it may have on island evolution and fate. In 2009, this effort provided the basis for a collaborative effort with the U.S. Army Corps of Engineers (USACE) to expand the investigation outside of GUIS boundaries as part of the Mississippi Coastal Improvement Project (MsCIP). The MsCIP program consists of structural, nonstructural, and environmental project elements to restore portions of coastal Mississippi and GUIS affected by storm impact. The project includes the placement of sand along the islands, both on the present beaches and within the littoral zone, to mitigate shoreline erosion and breaching. This action requires the location and assessment of offshore sand or sediment deposits that can provide suitable material for shoreline renourishment. The geophysical and sample information collected by the USGS during geologic investigations provides this information. As part of the MsCIP program, in March 2010 the USGS mapped approximately 300 square kilometers of seafloor around GUIS. Interferometric swath bathymetry, sidescan sonar, and Chirp sub-bottom profiling were used to characterize seafloor elevations, texture, and the underlying stratigraphy. On the basis of this information, potential sediment resources were identified. The most promising offshore deposits for beach restoration include shoals, lowstand valley fill, tidal delta deposits, abandoned barrier deposits, and dredge spoil. Of these, lowstand valley fill deposits and dredge spoil are less desirable; lowstand deposits are buried under a 2- to 4-meter blanket of mud, and dredge spoil volume is small. A relict tidal delta and submerged shoals are the most desirable deposits; the tidal delta contains a large volume of material still exposed on the seafloor, and parts of submerged shoals have modest volume and thin mud cover.

Monitoring Deformation Offshore Northern Chile Using a Seafloor Geodetic Network (GeoSEA)

NASA Astrophysics Data System (ADS)

Hannemann, K.; Lange, D.; Kopp, H.; Petersen, F.; Contreras-Reyes, E.

2016-12-01

The seafloor stores crucial information on sub-seafloor processes, including stress, elastic strain, and earthquake and tsunami generation. This information may be extracted through the emerging scientific field of seafloor geodesy. The target of the GeoSEA array (Geodetic Earthquake Observatory on the SEAfloor) is to measure deformation in mm-scale between instruments located in three target areas on the marine forearc and outer rise of the North Chilean subduction zone around 21°S. This segment of the Nazca-South American plate boundary has last ruptured in an earthquake in 1877 and was identified as a seismic gap prior to the 2014 Iquique/Pisagua earthquake (Mw=8.1). The southern portion of this segment is still unbroken. The GeoSEA network consists of autonomous seafloor transponders installed on 4 m high tripods. In December 2015, they were lowered to the seabed on the deep-sea cable of RV SONNE. The transponders measure acoustic distance, tilt, temperature and pressure for a period of 3.5 years. As additional component of the network, GeoSURF, a self-steering autonomous vehicle (wave glider), monitors system health and is able to upload data from the seafloor stations and to transfer it via satellite. We set up 3 subarrays with interstation distances of up to 2000 m. On the middle continental slope in 2300 m water depth, an array consisting of 8 transponders measures across crustal faults seen in AUV mapping. A second array of 5 stations located on the outer rise monitors extension across normal plate-bending faults. The deepest deployment in 5000 m water depth located on the lower continental slope with 10 stations is designed to measure diffuse strain build-up. We expect a precision of ± 4mm for each station pair. The data of 11 months will be downloaded in November 2015 during a cruise of RV Langseth and will reveal the deformation between the transponders located on the seafloor.

Resolving the Ripples (and a Mine): High-Resolution Multibeam Survey of Martha's Vineyard ONR Mine Burial Program Field Area

NASA Astrophysics Data System (ADS)

Mayer, L. A.; Raymond, R.; Glang, G.; Huff, L.

2002-12-01

In an effort to better understand the coastal processes responsible for the burial and exposure of small objects on the seafloor, the Office of Naval Research is sponsoring the Mine Burial Program. Among the field areas chosen for this program is the site of the Martha's Vineyard Coastal Observatory (MVCO), a permanent instrumented node in 12 m of water about 500 m off the southern shore of Martha?s Vineyard. In support of the ONR program, several site surveys of the MVCO area have been conducted (see Goff et al); here we report the result of the most recent of these surveys, a very high-resolution multibeam survey aimed at establishing a detailed base map for the region and providing a baseline from which subsequent surveys can measure seafloor change In late July we conducted a five day survey of an approximately 3 x 5 km area surrounding the MVCO node using a Reson 8125 focused multibeam sonar aboard the SAIC survey vessel Ocean Explorer. The 8125 is a newly developed multibeam sonar that operates at 455 kHz and uses dynamic focusing to compensate for the curvature of the wavefront in the near-field. By using a relatively long array, the system can achieve very high spatial resolution (0.5 degree beam width) and with the dynamic focusing, can operate in the near field. The real constraint on resolution using this system is the ability to position the soundings and thus three kinematic DGPS base stations were established on Martha?s Vineyard and three kinematic receivers were used on the survey vessel. The kinematic GPS positioning is also critical to the ability to do repeat surveys with an accuracy high enough to resolve small (less than 10 cm) seafloor changes. Also to aid in our ability to accurately position repeat surveys, divers jetted sonar reflectors into the seafloor to act as fiducials. A super high-resolution (4 m overlap) survey was conducted in a small area surrounding the MVCO node and mine burial sites, a slightly lower resolution survey (12 to 25 m overlap) in a box approximately 1 x 1 km surrounding the ?target box? and a lower resolution survey (25 to 40 m line overlap) in a 3 x 5 km region surrounding the 1 x 1 km box. The Reson 8125 produced approximately 1 gigabyte of data per hour. The bathymetric resolution we were able to achieve was beyond our expectations. The node site and all diver-emplaced reflectors were clearly identified Most amazingly, we are able to resolve fields of individual ripples that are less than 2 cm height. Of particular relevance to the mine burial program was our ability to resolve an instrumented mine that had been deployed earlier by NRL. This mine is buried in a scour depression and is only a few centimeters proud above the base of the depression.

In need of combined topography and bathymetry DEM

NASA Astrophysics Data System (ADS)

Kisimoto, K.; Hilde, T.

2003-04-01

In many geoscience applications, digital elevation models (DEMs) are now more commonly used at different scales and greater resolution due to the great advancement in computer technology. Increasing the accuracy/resolution of the model and the coverage of the terrain (global model) has been the goal of users as mapping technology has improved and computers get faster and cheaper. The ETOPO5 (5 arc minutes spatial resolution land and seafloor model), initially developed in 1988 by Margo Edwards, then at Washington University, St. Louis, MO, has been the only global terrain model for a long time, and it is now being replaced by three new topographic and bathymetric DEMs, i.e.; the ETOPO2 (2 arc minutes spatial resolution land and seafloor model), the GTOPO30 land model with a spatial resolution of 30 arc seconds (c.a. 1km at equator) and the 'GEBCO 1-MINUTE GLOBAL BATHYMETRIC GRID' ocean floor model with a spatial resolution of 1 arc minute (c.a. 2 km at equator). These DEMs are products of projects through which compilation and reprocessing of existing and/or new datasets were made to meet user's new requirements. These ongoing efforts are valuable and support should be continued to refine and update these DEMs. On the other hand, a different approach to create a global bathymetric (seafloor) database exists. A method to estimate the seafloor topography from satellite altimetry combined with existing ships' conventional sounding data was devised and a beautiful global seafloor database created and made public by W.H. Smith and D.T. Sandwell in 1997. The big advantage of this database is the uniformity of coverage, i.e. there is no large area where depths are missing. It has a spatial resolution of 2 arc minute. Another important effort is found in making regional, not global, seafloor databases with much finer resolutions in many countries. The Japan Hydrographic Department has compiled and released a 500m-grid topography database around Japan, J-EGG500, in 1999. Although the coverage of this database is only a small portion of the Earth, the database has been highly appreciated in the academic community, and accepted in surprise by the general public when the database was displayed in 3D imagery to show its quality. This database could be rather smoothly combined with the finer land DEM of 250m spatial resolution (Japan250m.grd, K. Kisimoto, 2000). One of the most important applications of this combined DEM of topography and bathymetry is tsunami modeling. Understanding of the coastal environment, management and development of the coastal region are other fields in need of these data. There is, however, an important issue to consider when we create a combined DEM of topography and bathymetry in finer resolutions. The problem arises from the discrepancy of the standard datum planes or reference levels used for topographic leveling and bathymetric sounding. Land topography (altitude) is defined by leveling from the single reference point determined by average mean sea level, in other words, land height is measured from the geoid. On the other hand, depth charts are made based on depth measured from locally determined reference sea surface level, and this value of sea surface level is taken from the long term average of the lowest tidal height. So, to create a combined DEM of topography and bathymetry in very fine scale, we need to avoid this inconsistency between height and depth across the coastal region. Height and depth should be physically continuous relative to a single reference datum across the coast within such new high resolution DEMs. (N.B. Coast line is not equal to 'altitude-zero line' nor 'depth-zero line'. It is defined locally as the long term average of the highest tide level.) All of this said, we still need a lot of work on the ocean side. Global coverage with detailed bathymetric mapping is still poor. Seafloor imaging and other geophysical measurements/experiments should be organized and conducted internationally and interdisciplinary ways more than ever. We always need greater technological advancement and application of this technology in marine sciences, and more enthusiastic minds of seagoing researchers as well. Recent seafloor mapping technology/quality both in bathymetry and imagery is very promising and even favorably compared with the terrain mapping. We discuss and present on recent achievement and needs on the seafloor mapping using several most up-to-date global- and regional- DEMs available for science community at the poster session.

Cascadia Gas Vent Distribution and Challenges to Quantify Margin-Wide Methane Fluxes

NASA Astrophysics Data System (ADS)

Scherwath, M.; Riedel, M.; Roemer, M.; Veloso, M.; Heesemann, M.; Spence, G.

2017-12-01

Gas venting along the Cascadia Margin has been mapped over decades with ship sonar and in recent years with permanent seafloor installations utilizing the seafloor observatories NEPTUNE of Ocean Networks Canada and the Cabled Array of the Ocean Observatories Initiative. We show the distribution of over 1000 vents, most on the shallow shelf. For a third of the vents we have estimated methane flow rates, ranging from 0.05 to 69 L/min, and extrapolate these results to a margin-wide methane flow estaimate of around 4 Mt/yr (at surface pressure and temperature) and a flux estimate of 0.05 kg yr-1 m-2. However, these estimates are based on several assumptions, e.g. bubble sizes or data coverage, providing large uncertainties. With continued research expeditions and potential seafloor calibration experiments, these data can be refined and improved in future years.

The Monterey Ocean Observing System Development Program

NASA Astrophysics Data System (ADS)

Chaffey, M.; Graybeal, J. B.; O'Reilly, T.; Ryan, J.

2004-12-01

The Monterey Bay Aquarium Research Institute (MBARI) has a major development program underway to design, build, test and apply technology suitable to deep ocean observatories. The Monterey Ocean Observing System (MOOS) program is designed to form a large-scale instrument network that provides generic interfaces, intelligent instrument support, data archiving and near-real-time interaction for observatory experiments. The MOOS mooring system is designed as a portable surface mooring based seafloor observatory that provides data and power connections to both seafloor and ocean surface instruments through a specialty anchor cable. The surface mooring collects solar and wind energy for powering instruments and transmits data to shore-side researchers using a satellite communications modem. The use of a high modulus anchor cable to reach seafloor instrument networks is a high-risk development effort that is critical for the overall success of the portable observatory concept. An aggressive field test program off the California coast is underway to improve anchor cable constructions as well as end-to-end test overall system design. The overall MOOS observatory systems view is presented and the results of our field tests completed to date are summarized.

Physical Conditions Associated with Widespread Seafloor Methane Discharge on the Northern US Atlantic Margin

NASA Astrophysics Data System (ADS)

Skarke, A. D.; Ruppel, C. D.; Brothers, D. S.

2014-12-01

Recent analysis of water column backscatter data and remotely operated vehicle (ROV) video imagery collected by NOAA Ship Okeanos Explorer between 2011 and 2013 revealed methane discharge from the seafloor at over 570 gas seep locations along the northern US Atlantic margin. To the best of our knowledge, such large-scale seepage has not previously been observed on a passive margin outside the Arctic or not spatially associated with a petroleum basin. This seepage has implications for the global carbon cycle, ocean chemistry (e.g., acidification), and in some cases, the climate system. Using data collected by Okeanos Explorer and NOAA's Deep Discoverer ROV, we combine water column backscatter data with video imagery and seafloor backscatter data to estimate gas flux and constrain the geoacoustic properties of the seabed at methane discharge sites. The total methane flux from the northern US Atlantic margin seeps is conservatively estimated at ~15-90 Mg y-1, based on observations of gas bubble volume, discharge rates, and discharge points per site. However, fewer than 1% of the identified seep sites have been inspected with a ROV, and this estimate is likely to be revised upward as the characteristics of the seeps are further constrained. Another important observation to emerge from our analysis is the lack of spatial correlation between seep sites and the ~5000 pockmarks mapped on the northern part of the US Atlantic margin. In this region, pockmarks, which are often easily identified by geophysical imaging of the seafloor, should not be considered potential target sites for finding undiscovered areas of seepage. Conversely, discrete patches of elevated relative seafloor acoustic backscatter amplitude do appear to be correlated with the spatial distribution of methane seeps, implying anomalous seafloor characteristic at seep loci. This finding is consistent with ROV video observations of authigenic carbonate outcrops and extensive chemosynthetic bivalve communities at seep sites, which create a seafloor substrate with higher acoustic impedance. This result suggests that seafloor acoustic reflectivity data, which are far more commonly collected and archived than water column backscatter data, might be used diagnostically to identify and constrain the distribution of seafloor locations of methane discharge.

Subsurface Implications of Spatially Variable Seafloor Character on the Atlantis Massif

NASA Astrophysics Data System (ADS)

Greene, J. A.; Tominaga, M.; Blackman, D. K.

2014-12-01

We documented and mapped the characteristics of the seafloor on the Atlantis Massif, an ocean core complex located at 30°N on the Mid-Atlantic Ridge. Our goal is to investigate the implications of these surficial features, particularly whether their spatial variations might reflect subsurface lithology and geological processes. We utilized data collected during the MARVEL 2000 cruise AT3-60, specifically Alvin videos and rock samples, Argo II digital still photos, and TOBI/DSL-120 side-scan sonar mosaic. The Alvin dives studied occurred over the Central Dome and Eastern Block, which is interpreted as the hanging wall to the detachment that unroofed the dome. We also studied two Argo II dives located over the Central Dome, one over the Eastern Block, and one over the Western Shoulder of the southern dome. The TOBI/DSL-120 side-scan sonar followed a widespread, looped track providing near total coverage of the massif. We classified the character of the seafloor based on imagery, the acoustic reflectivity, and the basic composition of rock samples. To aid in our classification, we merged Argo II still images to produce photo-mosaics displaying tens of meters long transects. We then classified the seafloor as unconsolidated sediment, lithified sediment (a carbonate crust or cap), exposed bedrock, or rubble. To obtain a broader understanding of the Atlantis Massif, we analyzed the distribution of these classes of seafloor. Over the Central Dome and Western Shoulder, we found most seafloor classes present in notable amounts, with many individual areas dominated by a particular type.

California State Waters Map Series—Offshore of Monterey, California

USGS Publications Warehouse

Johnson, Samuel Y.; Dartnell, Peter; Hartwell, Stephen R.; Cochrane, Guy R.; Golden, Nadine E.; Watt, Janet T.; Davenport, Clifton W.; Kvitek, Rikk G.; Erdey, Mercedes D.; Krigsman, Lisa M.; Sliter, Ray W.; Maier, Katherine L.; Johnson, Samuel Y.; Cochran, Susan A.

2016-08-18

IntroductionIn 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath bathymetry data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology.The Offshore of Monterey map area in central California is located on the Pacific Coast, about 120 km south of San Francisco. Incorporated cities in the map area include Seaside, Monterey, Marina, Pacific Grove, Carmel-by-the-Sea, and Sand City. The local economy receives significant resources from tourism, as well as from the Federal Government. Tourist attractions include the Monterey Bay Aquarium, Cannery Row, Fisherman’s Wharf, and the many golf courses near Pebble Beach, and the area serves as a gateway to the spectacular scenery and outdoor activities along the Big Sur coast to the south. Federal facilities include the Army’s Defense Language Institute, the Naval Postgraduate School, and the Fleet Numerical Meteorology and Oceanography Center (operated by the Navy). In 1994, Fort Ord army base, located between Seaside and Marina, was closed; much of former army base land now makes up the Fort Ord National Monument, managed by the U.S. Bureau of Land Management as part of the National Landscape Conservation System. In addition, part of the old Fort Ord is now occupied by California State University, Monterey Bay.The offshore part of the map area lies entirely within the Monterey Bay National Marine Sanctuary, one of the nation’s largest marine sanctuaries. State beaches and parks within the map area include Fort Ord Dunes State Park and the Marina, Monterey, and Asilomar State Beaches, as well as Carmel River State Beach, which includes the Carmel River Lagoon and Wetland Natural Preserve. The map area also includes all or part of several State Marine Protected Areas, including the Carmel Pinnacles, Asilomar, and Lovers Point–Julia Platt State Marine Reserves, as well as the Carmel Bay, Pacific Grove Marine Gardens, Edward F. Ricketts, and Portuguese Ledge State Marine Conservation Areas.The coastal zone in the map area is characterized by two distinct physiographies. From Marina to Monterey, sandy beaches are backed by a belt of sand dunes, as much as 30 to 40 m high and as wide as 8 km. The Salinas River supplies the sand for the beaches and dunes. Nearshore sediment transport is primarily to the south, in the southern Monterey littoral cell.Along the Monterey peninsula, which lies at the north end of the rugged Santa Lucia Range, coastal relief is very different. The peninsula is characterized largely by low marine terraces that formed mostly on hard and relatively stable granitic bedrock. Carmel Beach in Carmel-by-the-Sea is the longest continuous beach in this area; bedrock points and small pocket beaches characterize most of the rest of the peninsula. The Carmel River littoral cell extends along the coast from Point Pinos to Point Lobos (just south of the map area), including Carmel Beach; sediment transport is primarily to the south.The granitic rocks that crop out so prominently along the Monterey peninsula make up part of the Salinian block, a crustal terrane that in this area lies west of the San Andreas Fault and east of the San Gregorio Fault. The strike-slip San Andreas Fault Zone, which lies just 26 km east of the map area, is the most important structure within the Pacific–North American transform plate boundary. The San Gregorio Fault, a secondary fault within the distributed plate boundary, cuts through (and is roughly aligned with) Carmel Canyon, a submarine canyon in the southwest corner of the map area that is part of the Monterey Canyon system. The San Gregorio Fault Zone is part of a fault system that is present predominantly in the offshore for about 400 km, from Point Conception in the south (where it is known as the Hosgri Fault) to Bolinas and Point Reyes in the north.The offshore part of the map area primarily consists of relatively flat continental shelf, bounded on the west by the steep flanks of Carmel Canyon. Shelf width varies from 2 to 3 km in the southern part of the map area, near the mouth of Carmel Canyon, to 14 km in Monterey Bay. Bedrock beneath the shelf is overlain in many areas by variable amounts (0 to 16 m) of upper Quaternary shelf and nearshore sediments deposited as sea level fluctuated in the late Pleistocene. “Soft-induration,” unconsolidated sediment is the dominant (about 63 percent) habitat type on the continental shelf, followed by “hard-induration” rock and boulders (about 34 percent) and “mixed-induration” substrate (about 3 percent). At water depths of about 100 to 130 m, the shelf break approximates the shoreline during the sea-level lowstand of the Last Glacial Maximum, about 21,000 years ago.Carmel Canyon and other parts of the Monterey Canyon system in the map area extend from the shelf break to water depths that reach 1,600 m. Most of the extensive incision of the shelf break and canyon flanks probably occurred during repeated Quaternary sea-level lowstands. The relatively straight floor of Carmel Canyon notably is aligned with the San Gregorio Fault Zone. Mixed hard-soft substrate is the most common (about 51 percent) habitat type in Carmel Canyon; hard bedrock and soft, unconsolidated sediment cover about 40 percent and 9 percent of canyon habitat, respectively.This part of the central California coast is exposed to large North Pacific swells from the northwest throughout the year. Wave heights range from 2 to 10 m, the larger swells occurring from October to May. During El Niño–Southern Oscillation (ENSO) events, winter storms track farther south than they do in normal (non-ENSO) years, thereby impacting the map area more frequently and with waves of larger heights.Benthic species observed in the map area are natives of the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, the eastern limb of the North Pacific subtropical gyre that flows from southern British Columbia to Baja California.Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. An observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. The kelp beds are well-known habitat for the population of southern sea otters. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

Three High-Tech High Seniors Join the Alia Expedition to Samoa: Science and Science Education

NASA Astrophysics Data System (ADS)

English, B.; Delaney, R.; Staudigel, D.; Staudigel, H.; Koppers, A.; Hart, S.

2005-12-01

Three high school seniors from High Tech High (HTH) participated in the ALIA expedition that explored the Samoan hot spot track through seafloor mapping, rock sampling and the study of the water column above an active submarine volcano. The primary responsibility of the HTH participants focused on outreach and education, but they also were substantively involved in all scientific aspects of the cruise. Education and outreach activities included: maintaining the cruise website,the creation of ERESE digital library resources for earth science education, live video-conferences with students half a world away in San Diego, and offering tours of the Research Vessel Kilo Moana during an open house event organized with the Samoa Department of Eduation. At this occasion, the HTH seniors shared experiences and knowledge with the visiting Samoan elementary and high school students. Science involvement of the high school seniors included deck and laboratory work, by assisting with dredging, piston coring, rock cataloguing, casting CTDs, and computer programming. Three major computer programming efforts by the HTH seniors substantively supported the outreach activities and the science operations during ALIA. (1) The development of "CustomHTMLExport", a utility that allows for the export of photographs and their metadata into web pages and digital library collection. (2) The "CruiseWatch" featureson the ALIA website (http://earthref.org/ERESE/projects/ALIA/) that displays in near - real time key shipboard data such as the location on a map, geographic coordinates, ship speed, direction and wind speed and dredging data. (3) A dredge location simulator to predict the location of the dredge with respect to the ship and the seafloor which was made necessary for the safety of dredging due to the failure of pingers that normally are used to provide critical data for the location of the dredge with respect to the seafloor. The dredge location model is based a fluid dynamics approach and on a wide range of parameters that range from the bathymetry to the drag on the wire in the water. The latter was determined empirically from the wire angle during dynamic ship/winch operations. This model proved to be highly accurate, Our involvement with the ALIA expedition gave us some exciting perspectives on how scientific research is conducted at sea and the pleasure of having actually contributed to the expedition in terms of its science and outreach and education aspects. Our learning and science activities were shared with our peers at High Tech High as well as.

Importance of geology to fisheries management: Examples from the northeastern Gulf of Mexico

USGS Publications Warehouse

Scanlon, Kathryn M.; Koenig, C.C.; Coleman, F.C.; Miller, M.

2003-01-01

Seafloor mapping of shelf-edge habitats in the northeastern Gulf of Mexico demonstrates how sidescan-sonar imagery, seismic-reflection profiling, video data, geologic mapping, sediment sampling, and understanding the regional geologic history can enhance, support, and guide traditional fisheries research and management. New data from the Madison Swanson and Steamboat Lumps Marine Reserves reveal complex benthic habitats consisting of high-relief calcareous pinnacles, low-relief karstic hardbottom, rocky outcrops several kilometers in length, and variable thickness of fine-grained and apparently mobile coarse-grained sediments. Our data also show that certain fish alter the landscape by clearing sediment from hardbottom areas (e.g., red grouper Epinephelus morio) and by burrowing extensively in fine-grained sediment (e.g., tilefish Lopholatilus chamaeleonticeps). The seafloor imagery and geologic maps show that (a) sea level fluctuations played a dominant role in the development of the present-day regional geology, and (b) habitats (and benthic communities) are tied closely to geologic character. Understanding the geologic setting allowed for efficient and representative sampling of the biology. The geologic data can be used to set meaningful boundaries for fishery reserves and to help predict habitats in areas that are not well mapped. This interdisciplinary work added value to traditional research disciplines by providing management with integrated tools to make better decisions. 

Seismic, side-scan survey, diving, and coring data analyzed by a Macintosh II sup TM computer and inexpensive software provide answers to a possible offshore extension of landslides at Palos Verdes Peninsula, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dill, R.F.; Slosson, J.E.; McEachen, D.B.

1990-05-01

A Macintosh II{sup TM} computer and commercially available software were used to analyze and depict the topography, construct an isopach sediment thickness map, plot core positions, and locate the geology of an offshore area facing an active landslide on the southern side of Palos Verdes Peninsula California. Profile data from side scan sonar, 3.5 kHz, and Boomer subbottom, high-resolution seismic, diving, echo sounder traverses, and cores - all controlled with a mini Ranger II navigation system - were placed in MacGridzo{sup TM} and WingZ{sup TM} software programs. The computer-plotted data from seven sources were used to construct maps with overlaysmore » for evaluating the possibility of a shoreside landslide extending offshore. The poster session describes the offshore survey system and demonstrates the development of the computer data base, its placement into the MacGridzo{sup TM} gridding program, and transfer of gridded navigational locations to the WingZ{sup TM} data base and graphics program. Data will be manipulated to show how sea-floor features are enhanced and how isopach data were used to interpret the possibility of landslide displacement and Holocene sea level rise. The software permits rapid assessment of data using computerized overlays and a simple, inexpensive means of constructing and evaluating information in map form and the preparation of final written reports. This system could be useful in many other areas where seismic profiles, precision navigational locations, soundings, diver observations, and core provide a great volume of information that must be compared on regional plots to develop of field maps for geological evaluation and reports.« less

Seafloor bathymetry and gravity from the ALBACORE marine seismic experiment offshore southern California

NASA Astrophysics Data System (ADS)

Shintaku, N.; Weeraratne, D. S.; Kohler, M. D.

2010-12-01

Although the North America side of the plate boundary surrounding the southern California San Andreas fault region is well studied and instrumented, the Pacific side of this active tectonic boundary is poorly understood. In order to better understand this complex plate boundary offshore, its microplate structures, deformation, and the California Borderland formation, we have recently conducted the first stage of a marine seismic experiment (ALBACORE - Asthenospheric and Lithospheric Broadband Architecture from the California Offshore Region Experiment) deploying 34 ocean bottom seismometers offshore southern California in August 2010. We present preliminary data consisting of seafloor bathymetry and free air gravity collected from this experiment. We present high-resolution maps of bathymetry and gravity from the ALBACORE experiment compiled with previous ship track data obtained from the NGDC (National Geophysical Data Center) and the USGS. We use gravity data from Smith and Sandwell and study correlations with ship track bathymetry data for the features described below. We observe new seafloor geomorphological features far offshore and within the Borderland. Steep canyon walls which line the edges of the Murray fracture zone with possible volcanic flows along the canyon floor were mapped by multibeam bathymetry for the first time. Deep crevices juxtaposed with high edifices of intensely deformed plateaus indicate high strain deformation along the arcuate boundary of the Arguello microplate. Small volcanic seamounts are mapped which straddle the Ferrelo fault (Outer Borderland) and San Pedro fault (Inner Borderland), and appear to exhibit fracture and fault displacement of a portion of the volcanic centers in a left-lateral sense. A large landslide is also imaged extending approximately 6 miles in length and 3 miles in width in the Santa Cruz basin directly south of Santa Rosa Island. Deformation associated with capture of Arguello and Patton microplates by the Pacific plate is studied as well as deformation surrounding the Murray fracture zone near the California shore. Faults in the Borderland identified by improved sea floor mapping may indicate offshore earthquake sources.

User expectations for multibeam echo sounders backscatter strength data-looking back into the future

NASA Astrophysics Data System (ADS)

Lucieer, Vanessa; Roche, Marc; Degrendele, Koen; Malik, Mashkoor; Dolan, Margaret; Lamarche, Geoffroy

2018-06-01

With the ability of multibeam echo sounders (MBES) to measure backscatter strength (BS) as a function of true angle of insonification across the seafloor, came a new recognition of the potential of backscatter measurements to remotely characterize the properties of the seafloor. Advances in transducer design, digital electronics, signal processing capabilities, navigation, and graphic display devices, have improved the resolution and particularly the dynamic range available to sonar and processing software manufacturers. Alongside these improvements the expectations of what the data can deliver has also grown. In this paper, we identify these user-expectations and explore how MBES backscatter is utilized by different communities involved in marine seabed research at present, and the aspirations that these communities have for the data in the future. The results presented here are based on a user survey conducted by the GeoHab (Marine Geological and Biological Habitat Mapping) association. This paper summarises the different processing procedures employed to extract useful information from MBES backscatter data and the various intentions for which the user community collect the data. We show how a range of backscatter output products are generated from the different processing procedures, and how these results are taken up by different scientific disciplines, and also identify common constraints in handling MBES BS data. Finally, we outline our expectations for the future of this unique and important data source for seafloor mapping and characterisation.

Application of seismic interpretation in the development of Jerneh Field, Malay Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yusoff, Z.

1994-07-01

Development of the Jerneh gas field has been significantly aided by the use of 3-D and site survey seismic interpretations. The two aspects that have been of particular importance are identification of sea-floor and near-surface safety hazards for safe platform installation/development drilling and mapping of reservoirs/hydrocarbons within gas-productive sands of the Miocene groups B, D, and E. Choice of platform location as well as casing design require detailed analysis of sea-floor and near-surface safety hazards. At Jerneh, sea-floor pockmarks near-surface high amplitudes, distributary channels, and minor faults were recognized as potential operational safety hazards. The integration of conventional 3-D andmore » site survey seismic data enabled comprehensive understanding of the occurrence and distribution of potential hazards to platform installation and development well drilling. Three-dimensional seismic interpretation has been instrumental not only in the field structural definition but also in recognition of reservoir trends and hydrocarbon distribution. Additional gas reservoirs were identified by their DHI characteristics and subsequently confirmed by development wells. The innovative use of seismic attribute mapping techniques has been very important in defining both fluid and reservoir distribution in groups B and D. Integration of 3-D seismic data and well-log interpretations has helped in optimal field development, including the planning of well locations and drilling sequence.« less

Machine-learning classifiers applied to habitat and geological substrate mapping offshore South Carolina

NASA Astrophysics Data System (ADS)

White, S. M.; Maschmeyer, C.; Anderson, E.; Knapp, C. C.; Brantley, D.

2017-12-01

Offshore of northern South Carolina holds considerable potential for wind energy development. This study describes a method for comprehensive and efficient evaluation of the geological framework and archaeological artifacts in potential Bureau of Ocean Energy Management lease blocks located 12 km offshore Myrtle Beach, South Carolina. Identification of cultural artifacts and potential critical habitats on the seafloor is critical to support for lease blocks designation, but must be done primarily using sonar data with limited visual data. We used bathymetry and backscatter to create 6 m seafloor grids of slope, and gray-level co-occurrence matrices: homogeneity, entropy, and second-moment. Supervised automated classification using an adaptive neuro-fuzzy inference system (ANFIS) in Matlab scripts provided comprehensive evaluation of the seafloor in the study area. Coastal Carolina University collected EM3002 multibeam sonar from the R/V Coastal Explorer on multiple cruises in 2015-2016 in a 32 km by 9 km area. We processed the multibeam using QPS Qimera and Fledermaus Geocoder to produce bathymetric and backscatter datasets gridded at 0.5 m with estimated 0.1 m vertical resolution. During Fall 2016, Coastal Carolina University collected ground-referenced tow-camera imagery of 68 km in 4 different sites within the multibeam survey zone. We created a ground-reference bottom-type dataset with over 75,000 reference points from the imagery. We extracted slope, backscatter intensity, and the first principal component of backscatter textures to each point. We trained an adaptive neuro-fuzzy inference system (ANFIS) on 2,500 points representing three classes: soft-bottom, hard-bottom, and cultural artifact, 101 km2 is soft-bottom, 1.5 km2 is rocky outcrop or hard-bottom, and there were 3 locations of cultural artifacts. Our classification is > 88% accurate. The extent of human artifacts, such as sunken ships and artificial reefs, are under-represented by 60% in our classification as the classifier confused flat parts with relatively flat sand data. 100% of testing data representing rocky portions of the seafloor were correctly classified. The use of machine-learning classifiers to determine seafloor-type provides a new solution to habitat mapping and offshore engineering problems.

Volcanism, Iron, and Phytoplankton in the Heard and McDonald Islands Region, Southern Indian Ocean

NASA Astrophysics Data System (ADS)

Coffin, M. F.; Arculus, R. J.; Bowie, A. R.; Chase, Z.; Robertson, R.; Trull, T. W.; Heobi in2016 v01 Shipboard Party, T.

2016-12-01

Phytoplankton supply approximately half of the oxygen in Earth's atmosphere, and iron supply limits the growth of phytoplankton in the anemic Southern Ocean. Situated entirely within the Indian Ocean sector of the Southern Ocean are Australia's only active subaerial volcanoes, Heard and McDonald islands (HIMI) on the central Kerguelen Plateau, a large igneous province. Widespread fields of submarine volcanoes, some of which may be active, extend for distances of up to several hundred kilometers from the islands. The predominantly eastward-flowing Antarctic Circumpolar Current sweeps across the central Kerguelen Plateau, and extensive blooms of phytoplankton are observed on the Plateau down-current of HIMI. The goal of RV Investigator voyage IN2016_V01, conducted in January/February 2016, is to test the hypothesis that hydrothermal fluids, which cool active submarine volcanoes in the HIMI region, ascend from the seafloor and fertilise surface waters with iron, thereby enhancing biological productivity beginning with phytoplankton. Significant initial shipboard results include: Documentation, for the first time, of the role of active HIMI and nearby submarine volcanoes in supplying iron to the Southern Ocean. Nearshore waters had elevated dissolved iron levels. Although biomass was not correspondingly elevated, fluorescence induction data indicated highly productive resident phytoplankton. Discovery of >200 acoustic plumes emanating from the seafloor and ascending up to tens of meters into the water column near HIMI. Deep tow camera footage shows bubbles rising from the seafloor in an acoustic plume field north of Heard Island. Mapping 1,000 km2 of uncharted seafloor around HIMI. Submarine volcanic edifices punctuate the adjacent seafloor, and yielded iron-rich rocks similar to those found on HIMI, respectively. Acoustic plumes emanating from some of these features suggest active seafloor hydrothermal systems.

Sidescan sonar as a tool for detection of demersal fish habitats

USGS Publications Warehouse

Able, Kenneth W.; Twichell, David C.; Grimes, Churchill B.; Jones, R. S.

1987-01-01

Sidescan sonar can be an effective tool for the determination of the habitat distribution of commercially important species.  This technique has the advantage of rapidly mapping large areas of the seafloor.  Sidescan images (sonographs) may also help to identify appropriate fishing gears for different types of seafloor or areas to be avoided with certain types of gears.  During the early stages of exploration, verification of sidescan sonar sonographs is critical to successful identification of important habitats.  Tilefishes (Lopholatilus and Caulolatilus) are especially good target species because the construct large burrows in the seafloor or live around boulders, both of which are easily detectable on sonographs.  In some special circumstances the estimates of tilefish burrow densities from sonographs can be used to estimate standing stock. In many localities the burrow and boulder habitats of tilefish are shared with other commercially important species such as American lobsters, Homarus americanus; cusk, Brosme brosme; and ocean pout, Macrozoarces americanus.

Calibrating nadir striped artifacts in a multibeam backscatter image using the equal mean-variance fitting model

NASA Astrophysics Data System (ADS)

Yang, Fanlin; Zhao, Chunxia; Zhang, Kai; Feng, Chengkai; Ma, Yue

2017-07-01

Acoustic seafloor classification with multibeam backscatter measurements is an attractive approach for mapping seafloor properties over a large area. However, artifacts in the multibeam backscatter measurements prevent accurate characterization of the seafloor. In particular, the backscatter level is extremely strong and highly variable in the near-nadir region due to the specular echo phenomenon. Consequently, striped artifacts emerge in the backscatter image, which can degrade the classification accuracy. This study focuses on the striped artifacts in multibeam backscatter images. To this end, a calibration algorithm based on equal mean-variance fitting is developed. By fitting the local shape of the angular response curve, the striped artifacts are compressed and moved according to the relations between the mean and variance in the near-nadir and off-nadir region. The algorithm utilized the measured data of near-nadir region and retained the basic shape of the response curve. The experimental results verify the high performance of the proposed method.

Shallow geology, sea-floor texture, and physiographic zones of Vineyard and western Nantucket Sounds, Massachusetts

USGS Publications Warehouse

Baldwin, Wayne E.; Foster, David S.; Pendleton, Elizabeth A.; Barnhardt, Walter A.; Schwab, William C.; Andrews, Brian D.; Ackerman, Seth D.

2016-09-02

Geologic, sediment texture, and physiographic zone maps characterize the sea floor of Vineyard and western Nantucket Sounds, Massachusetts. These maps were derived from interpretations of seismic-reflection profiles, high-resolution bathymetry, acoustic-backscatter intensity, bottom photographs/video, and surficial sediment samples collected within the 494-square-kilometer study area. Interpretations of seismic stratigraphy and mapping of glacial and Holocene marine units provided a foundation on which the surficial maps were created. This mapping is a result of a collaborative effort between the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management to characterize the surface and subsurface geologic framework offshore of Massachusetts.

An open-water electrical geophysical tool for mapping sub-seafloor heavy placer minerals in 3D and migrating hydrocarbon plumes in 4D

USGS Publications Warehouse

Wynn, Jefferey C.; Urquhart, Scott; Williamson, Mike; Fleming, John B.

2011-01-01

A towed-streamer technology has been developed for mapping placer heavy minerals and dispersed hydrocarbon plumes in the open ocean. The approach uses induced polarization (IP), an electrical measurement that encompasses several different surface-reactive capacitive and electrochemical phenomena, and thus is ideally suited for mapping dispersed or disseminated targets. The application is operated at sea by towing active electrical geophysical streamers behind a ship; a wide area can be covered in three dimensions by folding tow-paths over each other in lawn-mower fashion. This technology has already been proven in laboratory and ocean settings to detect IP-reactive titanium- and rare-earth (REE) minerals such as ilmenite and monazite. By extension, minerals that weather and accumulate/concentrate by a similar mechanism, including gold, platinum, and diamonds, may be rapidly detected and mapped indirectly- even when dispersed and covered with thick, inert sediment. IP is also highly reactive to metal structures such as pipelines and cables. Currently, the only means for mapping an oil-spill plume is to park a large ship in the ocean and drop a sampling string over the side, requiring hours of time per sampling point. The samples must then be chemically analyzed, adding additional time and expense. We believe that an extension of the marine IP technology could also apply to rapidly mapping both seafloor- blanket and disseminated hydrocarbon plumes in the open ocean, as hydrocarbon droplets in conductive seawater are topologically equivalent to a metal-plates-and-dielectric capacitor. Because the effective capacitance would be frequency-dependent on droplet size, the approach we advocate holds the potential to not only map, but also to characterize the evolution and degradation of such a plume over time. In areas where offshore oil field development has been practiced for extended periods, making IP measurements from a towed streamer may be useful for locating buried - nd exposed pipelines, as well as pipeline leaks. We believe this technique will be a more cost-effective method than drop-sampling to map and monitor hydrocarbon plumes in open ocean settings. A marine induced polarization system was used successfully to map a 15 km × 45 km swath of the ocean floor off eastern South Africa with 3-meter sampling along 200-meter-separated profiles. The survey detected titanium-bearing sands up to 15 meters below the seafloor. From preliminary laboratory work it is apparent that we can extend this technology to monitor significant environmental problems including anthropogenic and industrial waste washed into sensitive estuaries and sounds during storm-water runoff episodes, and also to map and characterize dispersed oil plumes in the seawater column in three dimensions, as well as movement and dispersal of both over time.

GeoMapApp Learning Activities: Enabling the democratisation of geoscience learning

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.; Kluge, S.

2011-12-01

GeoMapApp Learning Activities (http://serc.carleton.edu/geomapapp) are step-by-step guided inquiry geoscience education activities that enable students to dictate the pace of learning. They can be used in the classroom or out of class, and their guided nature means that the requirement for teacher intervention is minimised which allows students to spend increased time analysing and understanding a broad range of geoscience data, content and concepts. Based upon GeoMapApp (http://www.geomapapp.org), a free, easy-to-use map-based data exploration and visualisation tool, each activity furnishes the educator with an efficient package of downloadable documents. This includes step-by-step student instructions and answer sheet; a teacher's edition annotated worksheet containing teaching tips, additional content and suggestions for further work; quizzes for use before and after the activity to assess learning; and a multimedia tutorial. The activities can be used by anyone at any time in any place with an internet connection. In essence, GeoMapApp Learning Activities provide students with cutting-edge technology, research-quality geoscience data sets, and inquiry-based learning in a virtual lab-like environment. Examples of activities so far created are student calculation and analysis of the rate of seafloor spreading, and present-day evidence on the seafloor for huge ancient landslides around the Hawaiian islands. The activities are designed primarily for students at the community college, high school and introductory undergraduate levels, exposing students to content and concepts typically found in those settings.

Surface mapping and drilling of extinct seafloor massive sulphide deposits (eSMS) from the TAG Hydrothermal Field, 26oN: A tale of two `Jaspers'

NASA Astrophysics Data System (ADS)

Stobbs, I. J.; Lusty, P.; Petersen, S.; Murton, B. J.

2017-12-01

Two extinct seafloor massive sulphide (eSMS) deposits within the TAG hydrothermal field, 26oN, mid-Atlantic ridge, were mapped and drilled: Southern Mound and the newly discovered `Rona Mound'. Surface mapping was undertaken by combining high definition video footage and high resolution bathymetry to interpret surface geological and geomorphological features. Drill core was recovered using the BGS RD2 robotic drilling rig. Surface mapping of the mounds revealed a superficial cover of carbonate and iron-oxyhydroxides sediments, observed to directly overly oxide coated sulphide material within fault scarps, which dissect the flanks of both mounds. Drilling at the summits of the mounds revealed similar stratigraphy to the mapping, with the addition of a coherent and dense layer of red-coloured silica-rich `jasper', up to 3m thick, underlying the sediments and overlying unoxidised massive sulphides. The jasper mineralogy is dominated by silica, with minor iron oxides and rare disseminated sulphides. It displays a range of complex textures including filamentous and dendritic iron oxides often coated in silica. Drill core samples show the material to be porous, but relatively impermeable. Strong and positive Eu (REE) anomalies indicates a hydrothermal origin with little evidence of a seawater signature (lack of negative Ce anomaly). Silica precipitation is associated with low temperature hydrothermal activity, chert and jasper materials are locally present within the nearby hydrothermally active TAG mound and are more widespread at low-temperature diffuse hydrothermal sites such as within the MESO field. We interpret the `jasper' layers to be a common product, formed during the waning, low temperature, stage of the hydrothermal cycle which may form an impermeable and resistant `cap' that protects the underlying massive sulphide ore body from oxidation and dissolution. The formation of a `jasper cap' could act automatically to preserve eSMS deposits when hydrothermal circulation ceases and is essential to preserving the resource potential of eSMS deposits. This `jasper' capping layer is important from an economic perspective, and reinforces the need for shallow sub-seafloor mapping as part of any deep-sea mineral exploration. This research received funding from the EC FP7 project Blue Mining (604500).

Bathymetry of the waters surrounding the Elizabeth Islands, Massachusetts

USGS Publications Warehouse

Pendleton, Elizabeth A.; Andrews, Brian D.; Ackerman, Seth D.; Twichell, Dave

2014-01-01

The Elizabeth Islands in Massachusetts that separate Vineyard Sound from Buzzards Bay are the remnants of a moraine (unconsolidated glacial sediment deposited at an ice sheet margin; Oldale and O’Hara, 1984). The most recent glacial ice retreat in this region occurred between 25,000 and 20,000 years ago, and the subsequent rise in sea level that followed deglaciation caused differences in the seafloor character between Buzzards Bay and Vineyard Sound. The relatively rough seafloor of Vineyard Sound reflects widespread exposure of glacial material. Shoals mark the location of recessional ice contact material, and deep channels illustrate where meltwater drainage incised glacial deposits. Following ice retreat from the Elizabeth Islands, a glacial lake formed across the mouth of Buzzards Bay, when the lake drained, it scoured two deep channels at the southern end of the bay. Sea level rise began to inundate Vineyard Sound and Buzzards Bay about 8,000 years ago and continues to modify the modern seafloor (Robb and Oldale, 1977). Fine-grained marine and estuarine sediments were deposited in the partially protected setting of Buzzards Bay. These deposits, up to 10 meters in thickness, buried the high-relief glacial landscape and created the generally smooth modern seafloor. In contrast, the Vineyard Sound of today experiences strong tidal currents, which largely prevent the deposition of fine-grained material and constantly rework the glacial sand and gravel within shoals. The seafloor of the sound largely reflects the contours of the ancient glaciated landscape that existed before sea level began to rise. The bathymetric data used to create the hillshaded relief image of the seafloor were collected by the U.S. Geological Survey (USGS) in cooperation with the Massachusetts Office of Coastal Zone Management and supplemented with National Oceanic and Atmospheric Administration hydrographic survey data. The map shows the detailed bathymetry of Buzzards Bay and Vineyard Sound with depth soundings shown on a 5-meter-per-pixel grid. Depths are coded by color where the deepest areas are in blue and the shallowest areas are in orange. The aerial photography for the Elizabeth Islands and Massachusetts mainland were obtained from the Massachusetts Office of Geographic Information. Data collected during this statewide cooperative project have been released in a series of USGS open-file reports. These publications and information regarding geologic mapping in Massachusetts can be obtained from the Coastal and Marine Geology Program’s Web site (http://woodshole.er.usgs.gov/project-pages/coastal_mass/).

Side-scan sonar and submersible observations: New techniques for gleaning more information from sea-floor outcrops

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kendall, J.; Hams, J.E.; Buck, S.P.

1990-05-01

Advances in high resolution side-scan sonar imaging technology are so effective at imaging sea-floor geology that they have greatly improved the efficiency of a bottom sampling program The traditional sea-floor geology methodology of shooting a high-resolution seismic survey and sampling along the seismic grid was considered successful if outcrops were sampled on 20% of the attempts. A submersible was used sparingly because of the inability to consistently locate sea-floor outcrops. Side-scan sonar images have increased the sampling success ratio to 70-95% and allow the cost-effective use of a submersible even in areas of sparse sea-floor outcrops. In offshore basins thismore » new technology has been used in consolidated and semiconsolidated rock terranes. When combined with observations from a two-man submersible, SCUBA traverses, seismic data, and traditional sea-floor bottom sampling techniques, enough data are provided to develop an integrated sea-floor geologic interpretation. On individual prospects, side-scan sonar has aided the establishment of critical dip in poor seismic data areas, located seeps and tar mounds, and determined erosional breaching of a prospect. Over a mature producing field, side-scan sonar has influenced the search for field extension by documenting the orientation and location of critical trapping cross faults. These relatively inexpensive techniques can provide critical data in any marine basin where rocks crop out on the sea floor.« less

Seismic structure of the crust and uppermost mantle of north America and adjacent oceanic basins: A synthesis

USGS Publications Warehouse

Chulick, G.S.; Mooney, W.D.

2002-01-01

We present a new set of contour maps of the seismic structure of North America and the surrounding ocean basins. These maps include the crustal thickness, whole-crustal average P-wave and S-wave velocity, and seismic velocity of the uppermost mantle, that is, Pn and Sn. We found the following: (1) The average thickness of the crust under North America is 36.7 km (standard deviation [s.d.] ??8.4 km), which is 2.5 km thinner than the world average of 39.2 km (s.d. ?? 8.5) for continental crust; (2) Histograms of whole-crustal P- and S-wave velocities for the North American crust are bimodal, with the lower peak occurring for crust without a high-velocity (6.9-7.3 km/sec) lower crustal layer; (3) Regions with anomalously high average crustal P-wave velocities correlate with Precambrian and Paleozoic orogens; low average crustal velocities are correlated with modern extensional regimes; (4) The average Pn velocity beneath North America is 8.03 km/sec (s.d. ?? 0.19 km/sec); (5) the well-known thin crust beneath the western United States extends into northwest Canada; (6) the average P-wave velocity of layer 3 of oceanic crust is 6.61 km/ sec (s.d. ?? 0.47 km/sec). However, the average crustal P-wave velocity under the eastern Pacific seafloor is higher than the western Atlantic seafloor due to the thicker sediment layer on the older Atlantic seafloor.

KIGAM Seafloor Observation System (KISOS) for the baseline study in monitoring of gas hydrate test production in the Ulleung Basin, Korea

NASA Astrophysics Data System (ADS)

Lee, Sung-rock; Chun, Jong-hwa

2013-04-01

For the baseline study in the monitoring gas hydrate test production in the Ulleung Basin, Korea Institute of Geoscience and Mineral Resources (KIGAM) has developed the KIGAM Seafloor Observation System (KISOS) for seafloor exploration using unmanned remotely operated vehicle connected with a ship by a cable. The KISOS consists of a transponder of an acoustic positioning system (USBL), a bottom finding pinger, still camera, video camera, water sampler, and measuring devices (methane, oxygen, CTD, and turbidity sensors) mounted on the unmanned ROV, and a sediment collecting device collecting sediment on the seafloor. It is very important to monitoring the environmental risks (gas leakage and production water/drilling mud discharge) which may be occurred during the gas hydrate test production drilling. The KISOS will be applied to solely conduct baseline study with the KIGAM seafloor monitoring system (KIMOS) of the Korean gas hydrate program in the future. The large scale of environmental monitoring program includes the environmental impact assessment such as seafloor disturbance and subsidence, detection of methane gas leakage around well and cold seep, methane bubbles and dissolved methane, change of marine environments, chemical factor variation of water column and seabed, diffusion of drilling mud and production water, and biological factors of biodiversity and marine habitats before and after drilling test well and nearby areas. The design of the baseline survey will be determined based on the result of SIMAP simulation in 2013. The baseline survey will be performed to provide the gas leakage and production water/drilling mud discharge before and after gas hydrate test production. The field data of the baseline study will be evaluated by the simulation and verification of SIMAP simulator in 2014. In the presentation, the authors would like introduce the configuration of KISOS and applicability to the seafloor observation for the gas hydrate test production in the Ulleung Basin. This work was financially supported by the the Ministry of Knowledge Economy(MKE) and Gas Hydrate R/D Organization(GHDO)

Similarities and Differences in the Distributions of Hydrothermal Venting and the Formation of Seafloor Massive Sulfide Deposits at the Tui Malila and Mariner Vent Fields, Valu Fa Ridge

NASA Astrophysics Data System (ADS)

Tivey, M. K.; Evans, G. N.; Ferrini, V. L.; Spierer, H.

2016-12-01

High-resolution bathymetric mapping and recovery and study of samples from precisely known locations relative to local tectonic and volcanic features provide insight into the formation of seafloor massive sulfide deposits. Additional insight comes from repeat mapping efforts in 2005 and 2016 that provide details of relations and changes that may have occurred over time. Located 21 km apart on the Valu Fa Ridge, the Tui Malila and Mariner vent fields exhibit contrasting vent fluid chemistry, mineral deposit composition, deposit morphology, and seafloor morphology. At the Tui Malila vent field, near-neutral pH fluids with low metal contents vent from Zn- and Ba-rich, but Cu-poor deposits. The highest temperature fluids are found near the intersection of two faults and between volcanic domes. In contrast, acidic, metal-rich hydrothermal fluids at the Mariner vent field vent from Cu-rich, Zn-poor deposits. No discernable faults are present. At both the Tui Malila and Mariner vent fields, intermediate temperature fluids were sampled emanating from barite-rich deposits. At the Tui Malila vent field, intermediate fluids vent from flange-dominated edifices that are located on brecciated lava flow that overlays one of the two faults. Intermediate fluids at the Mariner vent field vent from squat terrace-like edifices located peripheral (10-15 m) to high-temperature chimney edifices, and seafloor morphology is dominated by brecciated lava flows. Thermodynamic models of mixing between high-temperature hydrothermal fluids and seawater that consider subsurface deposition of sulfide minerals and iron oxyhydroxide were used to reproduce the chemistry of intermediate fluids. This study suggests that the porous, brecciated lavas characteristic of these two vent fields provide sites for subsurface mixing and contribute to mineral deposition, with the faults at the Tui Malila vent field providing a pathway for subsurface fluid flow.

Mid Ocean Ridge Processes at Very Low Melt Supply : Submersible Exploration of Smooth Ultramafic Seafloor at the Southwest Indian Ridge, 64 degree E

NASA Astrophysics Data System (ADS)

Cannat, M.; Agrinier, P.; Bickert, M.; Brunelli, D.; Hamelin, C.; Lecoeuvre, A.; Lie Onstad, S.; Maia, M.; Prampolini, M.; Rouméjon, S.; Vitale Brovarone, A.; Besançon, S.; Assaoui, E. M.

2017-12-01

Mid-ocean ridges are the Earth's most extensive and active volcanic chains. They are also, particularly at slow spreading rates, rift zones, where plate divergence is in part accommodated by faults. Large offset normal faults, also called detachments, are characteristic of slow-spreading ridges, where they account for the widespread emplacement of mantle-derived rocks at the seafloor. In most cases, these detachments occur together with ridge magmatism, with melt injection and faulting interacting to shape the newly formed oceanic lithosphere. Here, we seek to better understand these interactions and their effects on oceanic accretion by studying the end-member case of a ridge where magmatism is locally almost absent. The portion of the Southwest Indian ridge we are studying has an overal low melt supply, focused to discrete axial volcanoes, leaving almost zero melt to intervening sections of the axial valley. One of these nearly amagmatic section of the ridge, located at 64°E, has been the focus of several past cruises (sampling, mapping and seismic experiments). Here we report on the most recent cruise to the area (RV Pourquoi Pas? with ROV Victor; dec-jan 2017), during which we performed high resolution mapping, submersible exploration and sampling of the ultramafic seafloor and of sparse volcanic formations. Our findings are consistent with the flip-flop detachment hypothesis proposed for this area by Sauter et al. (Nature Geosciences, 2013; ultramafic seafloor forming in the footwall of successive detachment faults, each cutting into the footwall of the previous fault, with an opposite polarity). Our observations also document the extent and geometry of deformation in the footwall of a young axial detachment, the role of mass-wasting for the evolution of this detachment, and provide spectacular evidence for serpentinization-related hydrothermal circulation and for spatial links between faults and volcanic eruptions.

Applying machine learning to global surface ocean and seabed data to reveal the controls on the distribution of deep-sea sediments

NASA Astrophysics Data System (ADS)

Dutkiewicz, Adriana; Müller, Dietmar; O'Callaghan, Simon

2017-04-01

World's ocean basins contain a rich and nearly continuous record of environmental fluctuations preserved as different types of deep-sea sediments. The sediments represent the largest carbon sink on Earth and its largest geological deposit. Knowing the controls on the distribution of these sediments is essential for understanding the history of ocean-climate dynamics, including changes in sea-level and ocean circulation, as well as biological perturbations. Indeed, the bulk of deep-sea sediments comprises the remains of planktonic organisms that originate in the photic zone of the global ocean implying a strong connection between the seafloor and the sea surface. Machine-learning techniques are perfectly suited to unravelling these controls as they are able to handle large sets of spatial data and they often outperform traditional spatial analysis approaches. Using a support vector machine algorithm we recently created the first digital map of seafloor lithologies (Dutkiewicz et al., 2015) based on 14,400 surface samples. This map reveals significant deviations in distribution of deep-sea lithologies from hitherto hand-drawn maps based on far fewer data points. It also allows us to explore quantitatively, for the first time, the relationship between oceanographic parameters at the sea surface and lithologies on the seafloor. We subsequently coupled this global point sample dataset of 14,400 seafloor lithologies to bathymetry and oceanographic grids (sea-surface temperature, salinity, dissolved oxygen and dissolved inorganic nutrients) and applied a probabilistic Gaussian process classifier in an exhaustive combinatorial fashion (Dutkiewicz et al., 2016). We focused on five major lithologies (calcareous sediment, diatom ooze, radiolarian ooze, clay and lithogenous sediment) and used a computationally intensive five-fold cross-validation, withholding 20% of the data at each iteration, to assess the predictive performance of the machine learning method. We find that the occurrence of five major lithologies in the world's ocean can be predicted on the basis of just two or three parameters, notably sea-surface salinity and sea-surface temperature. These parameters control the growth and composition of plankton and specific salinities and temperatures are also associated with the influx of non-aerosol terrigenous material into the ocean. Bathymetry is an important parameter for discriminating the occurrence of calcareous sediment, clay and coarse lithogenous sediment from each other but it is not important for biosiliceous oozes. Consequently, radiolarian and diatom oozes are poor indicators of palaeo-depth. Contrary to widely held view, we find that calcareous and siliceous oozes are not linked to high surface productivity. Our analysis shows that small shifts in surface ocean conditions significantly affect the lithology of modern seafloor sediments on a global scale and that these relationships need to be incorporated into interpretations of the geological record of ocean basins. Dutkiewicz, A., Müller, R. D., O'Callaghan, S., and Jónasson, H., 2015, Census of seafloor sediments in the world's ocean: Geology, v. 43, no. 9, p. 795-798. Dutkiewicz, A., O'Callaghan, S., and Müller, R. D., 2016, Controls on the distribution of deep-sea sediments: Geochem. Geophys. Geosyst., v. 17, p. 1-24.

Mid-Shelf Hardground Fish Habitats off the Georgia Coast

NASA Astrophysics Data System (ADS)

Platt, M.; Sautter, L.

2016-02-01

Multibeam sonar data were collected off the Georgia coast aboard the R/V Savannah by the College of Charleston BEAMS Program in May 2015. Kongsberg EM2040C data were post-processed in CARIS HIPS and SIPS 9.0 to create bathymetric maps overlain with backscatter intensity. The mid-shelf focus sites lie at depths between 25 and 40 m, and include the northern edge of Gray's Reef National Marine Sanctuary. The study sites are known areas of abundant fish congregations, identified by the South Carolina Department of Natural Resources' Marine Resources Monitoring, Assessment, & Prediction (MARMAP) program. The regional mid-shelf seafloor morphology consists of sand ridges, rock outcrops, and incised meandering channels 1 to 3 m deep. Backscatter analysis was used to identify hardground structures that might provide habitat for a high diversity of vertebrates and invertebrates. Multiple hardground structures were found and characterized at these locations and will be targeted for further research and possible inclusion in the Georgia and South Carolina continental shelf Marine Protected Areas.

Seabed photographs, sediment texture analyses, and sun-illuminated sea floor topography in the Stellwagen Bank National Marine Sanctuary region off Boston, Massachusetts

USGS Publications Warehouse

Valentine, Page C.; Gallea, Leslie B.; Blackwood, Dann S.; Twomey, Erin R.

2010-01-01

The U.S. Geological Survey, in collaboration with National Oceanic and Atmospheric Administration's National Marine Sanctuary Program, conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary region from 1993 to 2004. The mapped area is approximately 3,700 km (1,100 nmi) in size and was subdivided into 18 quadrangles. An extensive series of sea-floor maps of the region based on multibeam sonar surveys has been published as paper maps and online in digital format (PDF, EPS, PS). In addition, 2,628 seabed-sediment samples were collected and analyzed and are in the usSEABED: Atlantic Coast Offshore Surficial Sediment Data Release. This report presents for viewing and downloading the more than 10,600 still seabed photographs that were acquired during the project. The digital images are provided in thumbnail, medium (1536 x 1024 pixels), and high (3071 x 2048) resolution. The images can be viewed by quadrangle on the U.S. Geological Survey Woods Hole Coastal and Marine Science Center's photograph database. Photograph metadata are embedded in each image in Exchangeable Image File Format and also provided in spreadsheet format. Published digital topographic maps and descriptive text for seabed features are included here for downloading and serve as context for the photographs. An interactive topographic map for each quadrangle shows locations of photograph stations, and each location is linked to the photograph database. This map also shows stations where seabed sediment was collected for texture analysis; the results of grain-size analysis and associated metadata are presented in spreadsheet format.

Geothermal Potential of the Siǧacik Gulf (Seferihisar) and Preliminary investigations with Seismic and Magnetic Surveys

NASA Astrophysics Data System (ADS)

Bakak, Özde; Özel, Erdeniz; Ergün, Mustafa

2015-04-01

The Aegean region, including both W. Turkey and Central Greece, is one of the world's most rapidly-deforming regions of continental crust and has a seismic rate is exceptional on a world scale. SW Turkey is one of the most rapidly extending regions in the world where the extension appears to have commenced in middle or late Miocene time. Paleomagnetic work in W Turkey and Aegean islands has revealed the horizontal rotation of some crustal blocks. In W Turkey clockwise rotation on Karaburun peninsula west of Izmir by 44° in the last few Ma is detected, and anticlockwise rotation of 37° for the Seferihisar region. The area of W Turkey and the Aegean islands has very strong geothermal gradient in the world scale. Sığacık Gulf is located on south of Karaburun Peninsula, and it is restricted by two important ridges as Karaburun and Seferihisar Ridges. Recent geological and geophysical studies suggested that this area is both E-W trending normal and NE-SW trending strike-slip faulting caused deformation. The Seferihisar earthquake series were occurred here during 17-20 October 2005. For investigation of geothermal potential and hot water outlets on the seafloor, shallow seismic and magnetic surveys are preferred, which were carried out onboard Dokuz Eylül-1 vessel belongs to Dokuz Eylül University, in 2011. Approximately 250km seismic reflection data was collected along 27 lines. During seismic method used Sparker system which has 1 channel and 12 hydrophone with 17 m long streamer, as a seismic source used SIG Seismic Marine ELC 80 (4 kV & 3.2 KV DC). Seismic data processing (band pass filter, bottom mute, top mute, true amplitude recovery, time migration) was made using Promax program in the Seismic Laboratory in the Institute of Marine Science and Technology. The basement topography map was prepared using Kingdom Suite program drawing seabed line on these sections. Sea floor topography changes between 30-120 m, and this increases towards Ikaria Basin. Penetration depth is maximum 90 meter from the seafloor. The seismic sections reveal both the lens structures represented as current accumulation areas, and deformation areas located in upper unit. At the same time, the marine magnetic survey was applied using SDM 4000 magnetometer of Shark Marine Technologies Company. The magnetic measurements were collected along the same seismic lines, and magnetic anomaly map shows the low magnetic anomaly value which is between -50nT and -90 nT, in east of Sığacık Gulf. In the light of shallow seismic and magnetic surveys, it is thought that the east of gulf may have geothermal activity on seafloor.

Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California

USGS Publications Warehouse

Wong, Florence L.; Phillips, Eleyne L.; Johnson, Samuel Y.; Sliter, Ray W.

2012-01-01

Models of the depth to the base of Last Glacial Maximum and sediment thickness over the base of Last Glacial Maximum for the eastern Santa Barbara Channel are a key part of the maps of shallow subsurface geology and structure for offshore Refugio to Hueneme Canyon, California, in the California State Waters Map Series. A satisfactory interpolation of the two datasets that accounted for regional geologic structure was developed using geographic information systems modeling and graphics software tools. Regional sediment volumes were determined from the model. Source data files suitable for geographic information systems mapping applications are provided.

A High-Speed Optical Modem Communication System for CORK Seafloor Observatories

NASA Astrophysics Data System (ADS)

Farr, N.; Tivey, M.; Ware, J.; Pontbriand, C.; Pelletier, L. P.

2014-12-01

High-speed communications underwater is an increasing requirement for data intensive seafloor sensors. Acoustic modems provide dependable long-range communications underwater, but data rates are limited to <57Kbps. Free-water optical modems (OMs) offer high data rate, 10Mbps communications over a range of 200 m - a distance for ROVs, AUVs or wire-lowered packages to communicate without the need to directly plug-in or retrieve the instrument. Over the past 4 years, we have demonstrated the functionality and utility of OM technology using a CORK borehole observatory as a test case. A CORK represents all of the basic components required for a seafloor observatory: a stable environment for long-term continuous measurements of earth and ocean phenomena, access to a unique environment below the seafloor and a standard communication interface. The CORK-OM features a high-bandwidth, low-latency optical system based on LED emitters and PMT receivers and an acoustic command and control system. OM tests established a communication link from 20 to 200 meters range at rates of 1, 5 and 10 Mbps with no bit errors. The seafloor OM was plugged into the CORK's existing underwater wet mateable connector and provided additional power to the CORK to boost the data rate to 1 Hz from the normal 1 minute sample period. To communicate with the seafloor CORK-OM, a number of different modalities were used. One method was an OM mounted to a CTD frame on a lowered wire from a ship with an SDSL link over the conducting wire. Other methods utilized OMs mounted to both ROV Jason and submersible Alvin. We deployed OMs at two CORKs in 2012 in the northeast pacific at sites 857D and 1025C. The CORKs were visited in 2013 by a vessel of opportunity to download data and were put into sleep mode. The CORKs were revisited in 2014, woken up and successfully interrogated for data. ALVIN retrieved the CORK-OMs for corrosion, biofouling and battery performance assessment. We also performed tests of a next generation OM using a deployed seafloor modem and AUV Sentry. A complete lambertian optical field was quantitatively mapped by Sentry and test data was successfully downloaded from 20 to 150 m slant range. The AUV modality demonstrates the capability of 'data-mule' operations to autonomously recover data from a seafloor observatory with minimal human intervention.

Geologic characteristics of benthic habitats in Glacier Bay, southeast Alaska

USGS Publications Warehouse

Harney, Jodi N.; Cochrane, Guy R.; Etherington, Lisa L.; Dartnell, Pete; Golden, Nadine E.; Chezar, Hank

2006-01-01

In April 2004, more than 40 hours of georeferenced submarine digital video was collected in water depths of 15-370 m in Glacier Bay to (1) ground-truth existing geophysical data (bathymetry and acoustic reflectance), (2) examine and record geologic characteristics of the sea floor, and (3) investigate the relation between substrate types and benthic communities, and (4) construct predictive maps of seafloor geomorphology and habitat distribution. Common substrates observed include rock, boulders, cobbles, rippled sand, bioturbated mud, and extensive beds of living horse mussels and scallops. Four principal sea-floor geomorphic types are distinguished by using video observations. Their distribution in lower and central Glacier Bay is predicted using a supervised, hierarchical decision-tree statistical classification of geophysical data.

Temporal Characterization of Hydrates System Dynamics beneath Seafloor Mounds. Integrating Time-Lapse Electrical Resistivity Methods and In Situ Observations of Multiple Oceanographic Parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutken, Carol; Macelloni, Leonardo; D'Emidio, Marco

This study was designed to investigate temporal variations in hydrate system dynamics by measuring changes in volumes of hydrate beneath hydrate-bearing mounds on the continental slope of the northern Gulf of Mexico, the landward extreme of hydrate occurrence in this region. Direct Current Resistivity (DCR) measurements were made contemporaneously with measurements of oceanographic parameters at Woolsey Mound, a carbonate-hydrate complex on the mid-continental slope, where formation and dissociation of hydrates are most vulnerable to variations in oceanographic parameters affected by climate change, and where changes in hydrate stability can readily translate to loss of seafloor stability, impacts to benthic ecosystems,more » and venting of greenhouse gases to the water-column, and eventually, the atmosphere. We focused our study on hydrate within seafloor mounds because the structurally-focused methane flux at these sites likely causes hydrate formation and dissociation processes to occur at higher rates than at sites where the methane flux is less concentrated and we wanted to maximize our chances of witnessing association/dissociation of hydrates. We selected a particularly well-studied hydrate-bearing seafloor mound near the landward extent of the hydrate stability zone, Woolsey Mound (MC118). This mid-slope site has been studied extensively and the project was able to leverage considerable resources from the team’s research experience at MC118. The site exhibits seafloor features associated with gas expulsion, hydrates have been documented at the seafloor, and changes in the outcropping hydrates have been documented, photographically, to have occurred over a period of months. We conducted observatory-based, in situ measurements to 1) characterize, geophysically, the sub-bottom distribution of hydrate and its temporal variability, and 2) contemporaneously record relevant environmental parameters (temperature, pressure, salinity, turbidity, bottom currents) to detect short-term changes within the hydrates system, identify relationships/impacts of local oceanographic parameters on the hydrates system, and improve our understanding of how seafloor instability is affected by hydrates-driven changes. A 2009 DCR survey of MC118 demonstrated that we could image resistivity anomalies to a depth of 75m below the seafloor in water depths of 1km. We reconfigured this system to operate autonomously on the seafloor in a pre-programmed mode, for periods of months. We designed and built a novel seafloor lander and deployment capability that would allow us to investigate the seafloor at potential deployment sites and deploy instruments only when conditions met our criteria. This lander held the DCR system, controlling computers, and battery power supply, as well as instruments to record oceanographic parameters. During the first of two cruises to the study site, we conducted resistivity surveying, selected a monitoring site, and deployed the instrumented lander and DCR, centered on what appeared to be the most active locations within the site, programmed to collect a DCR profile, weekly. After a 4.5-month residence on the seafloor, the team recovered all equipment. Unfortunately, several equipment failures occurred prior to recovery of the instrument packages. Prior to the failures, however, two resistivity profiles were collected together with oceanographic data. Results show, unequivocally, that significant changes can occur in both hydrate volume and distribution during time periods as brief as one week. Occurrences appear to be controlled by both deep and near-surface structure. Results have been integrated with seismic data from the area and show correspondence in space of hydrate and structures, including faults and gas chimneys.« less

Putting the Deep Biosphere and Gas Hydrates on the Map

ERIC Educational Resources Information Center

Sikorski, Janelle J.; Briggs, Brandon R.

2016-01-01

Microbial processes in the deep biosphere affect marine sediments, such as the formation of gas hydrate deposits. Gas hydrate deposits offer a large source of natural gas with the potential to augment energy reserves and affect climate and seafloor stability. Despite the significant interdependence between life and geology in the ocean, coverage…

Current Approaches to Improving Marine Geophysical Data Discovery and Access

NASA Astrophysics Data System (ADS)

Jencks, J. H.; Cartwright, J.; Varner, J. D.; Anderson, C.; Robertson, E.; McLean, S. J.

2016-02-01

Exploring, understanding, and managing the global oceans is a challenge when hydrographic maps are available for only 5% of the world's oceans, even less of which have been mapped geologically or to identify benthic habitats. Seafloor mapping is expensive and most government and academic budgets continue to tighten. The first step for any mapping program, before setting out to map uncharted waters, should be to identify if data currently exist in the area of interest. There are many reasons why this seemingly simple suggestion is not commonplace. While certain datasets are accessible online (e.g., NOAA's NCEI, EMODnet, IHO-DCDB), many are not. In some cases, data that are publicly available are difficult to discover and access. No single agency can successfully resolve the complex and pressing demands of ocean and coastal mapping and the associated data stewardship. NOAA partners with other federal agencies to provide an integrated approach to carry out a coordinated and comprehensive ocean and coastal mapping program. In order to maximize the return on their mapping investment, legacy and newly acquired data must be easily discoverable and readily accessible by numerous applications and formats now and well into the future. At NOAA's National Centers for Environmental Information (NCEI), resources are focused on ensuring the security and widespread availability of the Nation's scientific marine geophysical data through long-term stewardship. The public value of these data and products is maximized by streamlining data acquisition and processing operations, minimizing redundancies, facilitating discovery, and developing common standards to promote re-use. For its part, NCEI draws on a variety of software technologies and adheres to international standards to meet this challenge. The result is a geospatial framework built on spatially-enabled databases, standards-based web services, and International Standards Organization (ISO) metadata. In order to maximize effectiveness in ocean and coastal mapping, we must be sure that limited funding is not being used to collect data in areas where data already exist. By making data more accessible, NCEI extends the use of, and therefore the value of, these data. Working together, we can ensure that valuable data are made available to the broadest community.

Deep-tow geophysical survey above large exhumed mantle domains of the eastern Southwest Indian ridge

NASA Astrophysics Data System (ADS)

Bronner, A.; Munschy, M.; Sauter, D.; Carlut, J.; Searle, R.; Cannat, M.

2012-04-01

The recent discovery of a new type of seafloor, the "smooth seafloor", formed with no or very little volcanic activity along the easternmost part of the ultra-slow spreading Southwest Indian ridge (SWIR) shows an unexpected complexity in processes of generation of the oceanic lithosphere. There, detachment faulting is thought to be a mechanism for efficient exhumation of deep-seated mantle rocks. We present here a deep-tow geological-geophysical survey over smooth seafloor at the eastern SWIR (62-64°N) combining multibeam bathymetric data, magnetic data, geology mapping from sidescan sonar (TOBI) images and results from dredge sampling. We introduce a new type of calibration approach for deep-tow fluxgate magnetometer. We show that magnetic data can be corrected from the magnetic effect of the vehicle with no recourse to its attitude (pitch, roll and heading) but only using the 3 components recorded by the magnetometer and an approximation of the scalar intensity of the Earth magnetic field. The collected dredge samples as well as the sidescan sonar images confirm the presence of large areas of exhumed mantle-derived peridodites surrounded by a few volcanic constructions. We investigate the possibility that magnetic anomalies are either caused by serpentinized peridotites and/or magmatic intrusions. We show that the magnetic signature of the smooth seafloor is clearly weaker than the surrounding volcanic areas. Moreover, the calculated magnetization of a source layer as well as the comparison between deep-tow and sea-surface magnetic data argue for strong East-West variability in the distribution of the magnetized sources. This variability may result from fluid-rock interactions along the detachment faults as well as from the occurrence of small sized and thin volcanic patches and thus questions the seafloor spreading origin of the corresponding magnetic anomalies. Finally, we provide magnetic arguments, as calculation of block rotation or spreading asymmetry in order to better constrain tectonic mechanisms that occur during the formation of this peculiar seafloor.

Deep-tow magnetic survey above large exhumed mantle domains of the eastern Southwest Indian ridge

NASA Astrophysics Data System (ADS)

Bronner, A.; Munschy, M.; Carlut, J. H.; Searle, R. C.; Sauter, D.; Cannat, M.

2011-12-01

The recent discovery of a new type of seafloor, the "smooth seafloor", formed with no or very little volcanic activity along the ultra-slow spreading Southwest Indian ridge (SWIR) shows an unexpected complexity in processes of generation of the oceanic lithosphere. There, detachment faulting is thought to be a mechanism for efficient exhumation of deep-seated mantle rocks. We present here a deep-tow geological-geophysical survey over smooth seafloor at the eastern SWIR (62-64°N) combining magnetic data, geology mapping from side-scan sonar images and results from dredge sampling. We introduce a new type of calibration approach for deep-tow fluxgate magnetometer. We show that magnetic data can be corrected from the magnetic effect of the vehicle with no recourse to its attitude (pitch, roll and heading) but only using the 3 components recorded by the magnetometer and an approximation of the scalar intensity of the Earth magnetic field. The collected dredge samples as well as the side-scan images confirm the presence of large areas of exhumed mantle-derived peridodites surrounded by a few volcanic constructions. This allows us to hypothesis that magnetic anomalies are caused by serpentinized peridotites or magmatic intrusions. We show that the magnetic signature of the smooth seafloor is clearly weaker than the surrounding volcanic areas. Moreover, the calculated magnetization of a source layer as well as the comparison between deep-tow and sea-surface magnetic data argue for strong East-West variability in the distribution of the magnetized sources. This variability may results from fluid-rocks interaction along the detachment faults as well as from the repartition of the volcanic material and thus questions the seafloor spreading origin of the corresponding magnetic anomalies. Finally, we provide magnetic arguments, as calculation of block rotation or spreading asymmetry in order to better constrain tectonic mechanisms that occur during the formation of this peculiar seafloor.

Processing of SeaMARC swath sonar imagery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pratson, L.; Malinverno, A.; Edwards, M.

1990-05-01

Side-scan swath sonar systems have become an increasingly important means of mapping the sea floor. Two such systems are the deep-towed, high-resolution SeaMARC I sonar, which has a variable swath width of up to 5 km, and the shallow-towed, lower-resolution SeaMARC II sonar, which has a swath width of 10 km. The sea-floor imagery of acoustic backscatter output by the SeaMARC sonars is analogous to aerial photographs and airborne side-looking radar images of continental topography. Geologic interpretation of the sea-floor imagery is greatly facilitated by image processing. Image processing of the digital backscatter data involves removal of noise by medianmore » filtering, spatial filtering to remove sonar scans of anomalous intensity, across-track corrections to remove beam patterns caused by nonuniform response of the sonar transducers to changes in incident angle, and contrast enhancement by histogram equalization to maximize the available dynamic range. Correct geologic interpretation requires submarine structural fabrics to be displayed in their proper locations and orientations. Geographic projection of sea-floor imagery is achieved by merging the enhanced imagery with the sonar vehicle navigation and correcting for vehicle attitude. Co-registration of bathymetry with sonar imagery introduces sea-floor relief and permits the imagery to be displayed in three-dimensional perspectives, furthering the ability of the marine geologist to infer the processes shaping formerly hidden subsea terrains.« less

Shallow Methane Hydrates: Rates, Mechanisms of Formation and Environmental Significance.

NASA Astrophysics Data System (ADS)

Torres, M. E.; Trehu, A. M.

2005-05-01

Shallow gas hydrates have been identified at more than 20 locations worldwide, and are commonly associated with observations of bubble discharge at the seafloor. These deposits are host to active chemosynthetic communities and are likely to play a predominant role in energy, climate and carbon cycle issues associated with hydrate processes. Because seafloor gas hydrates are not in equilibrium with seawater, these deposits require a constant supply of methane to replace loss by continuous diffusion to bottom water. We will summarize evidence documenting that at the shallow deposits on Hydrate Ridge (OR) methane must be delivered in the free gas phase and present simple models used to infer formation rates, which are orders of magnitude higher than those for hydrates formed deeper in the sediment column (Torres et al., 2004). At Hydrate Ridge, methane gas is channeled from deep accretionary margin sequences to the gas hydrate stability zone (GHSZ) through a permeable layer that has been mapped seismically (Horizon A). High gas pressure in this horizon can drive gas through the GHSZ to the seafloor (Trehu et al., 2004). We will review current ideas that address mechanisms whereby gas migrates from Horizon A to the seafloor, including inhibition by capillary effects and the development of a high salinity front that can shift the hydrate stability field enough to allow for methane transport as a gas phase.

Overpressure, Flow Focusing, Compaction and Slope Stability on the continental slope: Insights from IODP Expedition 308

NASA Astrophysics Data System (ADS)

Flemings, P. B.

2010-12-01

Integrated Ocean Drilling Program Expepedition 308 used direct measurements of pore pressure, analysis of hydromechanical properties, and geological analysis to illuminate how sedimentation, flow focusing, overpressure, and slope stability couple beneath the seafloor on the deepwater continental slope in the Gulf of Mexico. We used pore pressure penetrometers to measure severe overpressures (60% of the difference between lithostatic stress and hydrostatic pressure) that extend from the seafloor for 100’s of meters. We ran uniaxial consolidation experiments on whole core and found that although permeability is relatively high near the seafloor, the sediments are highly compressible. As a result, the coefficient of consolidation (the hydraulic diffusivity) is remarkably constant over a large range of effective stresses. This behavior accounts for the high overpressure that begins near the seafloor and extends to depth. Forward modeling suggests that flow is driven laterally along a permeable unit called the Blue Unit. Calculations suggest that soon after deposition, lateral flow lowered the effective stress and triggered the submarine landslides that we observe. Later in the evolution of this system, overpressure may have pre-conditioned the slope to failure by earthquakes. Results from IODP Expedition 308 illustrate how pore pressure and sedimentation control the large-scale form of continental margins, how submarine landslides form, and provide strategies for designing stable drilling programs.

Multibeam Sonar Backscatter Data Acquisition and Processing: Guidelines and Recommendations from the GEOHAB Backscatter Working Group

NASA Astrophysics Data System (ADS)

Heffron, E.; Lurton, X.; Lamarche, G.; Brown, C.; Lucieer, V.; Rice, G.; Schimel, A.; Weber, T.

2015-12-01

Backscatter data acquired with multibeam sonars are now commonly used for the remote geological interpretation of the seabed. The systems hardware, software, and processing methods and tools have grown in numbers and improved over the years, yet many issues linger: there are no standard procedures for acquisition, poor or absent calibration, limited understanding and documentation of processing methods, etc. A workshop organized at the GeoHab (a community of geoscientists and biologists around the topic of marine habitat mapping) annual meeting in 2013 was dedicated to seafloor backscatter data from multibeam sonars and concluded that there was an overwhelming need for better coherence and agreement on the topics of acquisition, processing and interpretation of data. The GeoHab Backscatter Working Group (BSWG) was subsequently created with the purpose of documenting and synthetizing the state-of-the-art in sensors and techniques available today and proposing methods for best practice in the acquisition and processing of backscatter data. Two years later, the resulting document "Backscatter measurements by seafloor-mapping sonars: Guidelines and Recommendations" was completed1. The document provides: An introduction to backscatter measurements by seafloor-mapping sonars; A background on the physical principles of sonar backscatter; A discussion on users' needs from a wide spectrum of community end-users; A review on backscatter measurement; An analysis of best practices in data acquisition; A review of data processing principles with details on present software implementation; and finally A synthesis and key recommendations. This presentation reviews the BSWG mandate, structure, and development of this document. It details the various chapter contents, its recommendations to sonar manufacturers, operators, data processing software developers and end-users and its implication for the marine geology community. 1: Downloadable at https://www.niwa.co.nz/coasts-and-oceans/research-projects/backscatter-measurement-guidelines

Bathymetry, substrate and circulation in Westcott Bay, San Juan Islands, Washington

USGS Publications Warehouse

Grossman, Eric E.; Stevens, Andrew W.; Curran, Chris; Smith, Collin; Schwartz, Andrew

2007-01-01

Nearshore bathymetry, substrate type, and circulation patterns in Westcott Bay, San Juan Islands, Washington, were mapped using two acoustic sonar systems, video and direct sampling of seafloor sediments. The goal of the project was to characterize nearshore habitat and conditions influencing eelgrass (Z. marina) where extensive loss has occurred since 1995. A principal hypothesis for the loss of eelgrass is a recent decrease in light availability for eelgrass growth due to increase in turbidity associated with either an increase in fine sedimentation or biological productivity within the bay. To explore sources for this fine sediment and turbidity, a dual-frequency Biosonics sonar operating at 200 and 430 kHz was used to map seafloor depth, morphology and vegetation along 69 linear kilometers of the bay. The higher frequency 430 kHz system also provided information on particulate concentrations in the water column. A boat-mounted 600 kHz RDI Acoustic Doppler Current Profiler (ADCP) was used to map current velocity and direction and water column backscatter intensity along another 29 km, with select measurements made to characterize variations in circulation with tides. An underwater video camera was deployed to ground-truth acoustic data. Seventy one sediment samples were collected to quantify sediment grain size distributions across Westcott Bay. Sediment samples were analyzed for grain size at the Western Coastal and Marine Geology Team sediment laboratory in Menlo Park, Calif. These data reveal that the seafloor near the entrance to Westcott Bay is rocky with a complex morphology and covered with dense and diverse benthic vegetation. Current velocities were also measured to be highest at the entrance and along a deep channel extending 1 km into the bay. The substrate is increasingly comprised of finer sediments with distance into Westcott Bay where current velocities are lower. This report describes the data collected and preliminary findings of USGS Cruise B-6-07-PS conducted between May 31, 2007 and June 5, 2007.

Advances in detection of diffuse seafloor venting using structured light imaging.

NASA Astrophysics Data System (ADS)

Smart, C.; Roman, C.; Carey, S.

2016-12-01

Systematic, remote detection and high resolution mapping of low temperature diffuse hydrothermal venting is inefficient and not currently tractable using traditional remotely operated vehicle (ROV) mounted sensors. Preliminary results for hydrothermal vent detection using a structured light laser sensor were presented in 2011 and published in 2013 (Smart) with continual advancements occurring in the interim. As the structured light laser passes over active venting, the projected laser line effectively blurs due to the associated turbulence and density anomalies in the vent fluid. The degree laser disturbance is captured by a camera collecting images of the laser line at 20 Hz. Advancements in the detection of the laser and fluid interaction have included extensive normalization of the collected laser data and the implementation of a support vector machine algorithm to develop a classification routine. The image data collected over a hydrothermal vent field is then labeled as seafloor, bacteria or a location of venting. The results can then be correlated with stereo images, bathymetry and backscatter data. This sensor is a component of an ROV mounted imaging suite which also includes stereo cameras and a multibeam sonar system. Originally developed for bathymetric mapping, the structured light laser sensor, and other imaging suite components, are capable of creating visual and bathymetric maps with centimeter level resolution. Surveys are completed in a standard mowing the lawn pattern completing a 30m x 30m survey with centimeter level resolution in under an hour. Resulting co-registered data includes, multibeam and structured light laser bathymetry and backscatter, stereo images and vent detection. This system allows for efficient exploration of areas with diffuse and small point source hydrothermal venting increasing the effectiveness of scientific sampling and observation. Recent vent detection results collected during the 2013-2015 E/V Nautilus seasons will be presented. Smart, C. J. and Roman, C. and Carey, S. N. (2013) Detection of diffuse seafloor venting using structured light imaging, Geochemistry, Geophysics, Geosystems, 14, 4743-4757

Bringing cutting-edge Earth and ocean sciences to under-served and rural audiences through informal science education

NASA Astrophysics Data System (ADS)

Cooper, S. K.; Petronotis, K. E.; Ferraro, C.; Johnson, K. T. M.; Yarincik, K.

2017-12-01

The International Ocean Discovery Program (IODP) is an international marine research collaboration that explores Earth's history and dynamics using ocean-going research platforms to recover data recorded in seafloor sediments and rocks and to monitor subseafloor environments. The JOIDES Resolution is the flagship vessel of IODP and is operated by the National Science Foundation. It is an inspirational hook for STEM Earth and ocean topics for children and the general public of all ages, but is not easily accessible due to its international travels and infrequent U.S. port calls. In response, a consortium of partners has created the Pop-Up/Drill Down Science project. The multi-year project, funded by NSF's Advancing Informal Science Learning program, aims to bring the JR and its science to under-served and rural populations throughout the country. Consisting of an inflatable walk-through ship, a multi-media experience, a giant interactive seafloor map and a series of interactive exhibit kiosks, the exhibit, entitled, In Search of Earth's Secrets: A Pop-Up Science Encounter, will travel to 12 communities throughout the next four years. In each community, the project will partner with local institutions like public libraries and small museums as hosts and to train local Girl Scouts to serve as exhibit facilitators. By working with local communities to select events and venues for pop-up events, the project hopes to bring cutting edge Earth and ocean science in creative new ways to underserved populations and inspire diverse audiences to explore further. This presentation will provide details of the project's goals, objectives and development and provide avenues to become involved.

Sidescan sonar imagery and surficial geologic interpretation of the sea floor off Branford, Conneticut

USGS Publications Warehouse

Poppe, L.J.; Paskevich, V.F.; Moser, M.S.; DiGiacomo-Cohen, M. L.; Christman, E.B.

2004-01-01

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Environmental Protection (CT DEP), Figure 1 - Map of Study Areahas produced detailed geologic maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States. These studies have built upon cooperative research between the USGS and the State of Connecticut that was initiated in 1982. The current phase of this research program is directed toward studies of sea-floor sediment distribution, processes that control sediment distribution, nearshore environmental concerns, and the relation of benthic community structures to the sea-floor geology. Anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994). Detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help wisely manage resources in the future. Therefore, in a continuing effort to better understand Long Island Sound, we are constructing and interpreting sidescan sonar mosaics (complete-coverage acoustic images of the sea floor) within specific areas of special interest (Poppe and Polloni, 1998). The mosaic presented herein, which was produced during survey H11043 by NOAA 's Atlantic Hydrographic Branch, covers approximately 41.1 km2 of the sea floor in north-central Long Island Sound off Branford, Connecticut. Shell bed provides shelter for juvenille skate.The mosaic and its interpretation serve many purposes, including: (1) defining the geological variability of the sea floor, which is one of the primary controls of benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats and associated infaunal community structures; and (3) providing a detailed framework for future research, monitoring, and management activities. The sidescan sonar mosaic also serves as a base map for subsequent sedimentological, geochemical, and biological observations, because precise information on environmental setting is important for selection of sampling sites and for appropriate interpretation of point measurements.

Where to Go Next? Identifying Target Areas in the North Atlantic for Future Seafloor Mapping Initiatives

NASA Astrophysics Data System (ADS)

Woelfl, A. C.; Jencks, J.; Johnston, G.; Varner, J. D.; Devey, C. W.

2017-12-01

Human activities are rapidly expanding into the oceans, yet detailed bathymetric maps do not exist for most of the seafloor that would permit governments to formulate sensible usage rules. Changing this situation will require an enormous international mapping effort. To ensure that this effort is directed towards the regions most in need of mapping, we need to know which areas have already been mapped and which areas are potentially most interesting. Despite various mapping efforts in recent years, large parts of the Atlantic still lack detailed bathymetric information. To successfully plan for future mapping efforts to fill these gaps, knowledge of current data coverage is imperative to avoid duplication of effort. While certain datasets are publically available online (e.g. NOAA's NCEI, EMODnet, IHO-DCDB, LDEO's GMRT), many are not. However, with the limited information we do have at hand, the question remains, where should we map next? And what criteria should we take into account? In 2016, a study was taken on as part of the efforts of the International Atlantic Seabed Mapping Working Group (ASMIWG). The ASMIWG, established by the Tri-Partite Galway Statement Implementation Committee, was tasked to develop a cohesive seabed mapping strategy for the Atlantic Ocean. The aim of our study was to develop a reproducible process for identifying and evaluating potential target areas within the North Atlantic that represent suitable sites for future bathymetric surveys. The sites were selected by applying a GIS-based suitability analysis that included specific user group-based parameters of the marine environment. Furthermore, information regarding current data coverage were gathered to take into account in the selection process. The results reveal the suitability of sites within the North Atlantic based on the selected criteria. Three potential target sites should be seen as flexible suggestions for future mapping initiatives rather than a rigid, defined set of areas. This methodology can be adjusted to other areas of interest and can include a variety of parameters based on stakeholder interest. Further this work only included accessible and displayable information about multibeam data coverage and would certainly benefit from more easily available and discoverable data sets or at least from location information.

Historical bathymetry and bathymetric change in the Mississippi-Alabama coastal region, 1847-2009

USGS Publications Warehouse

Buster, Noreen A.; Morton, Robert A.

2011-01-01

Land loss and seafloor change around the Mississippi and Alabama (MS-AL) barrier islands are of great concern to the public and to local, state, and federal agencies. The islands provide wildlife protected areas and recreational land, and they serve as a natural first line of defense for the mainland against storm activity (index map on poster). Principal physical conditions that drive morphological seafloor and coastal change in this area include decreased sediment supply, sea-level rise, storms, and human activities (Otvos, 1970; Byrnes and others, 1991; Morton and others, 2004; Morton, 2008). Seafloor responses to the same processes can also affect the entire coastal zone. Sediment eroded from the barrier islands is entrained in the littoral system, where it is redistributed by alongshore currents. Wave and current activity is partially controlled by the profile of the seafloor, and this interdependency along with natural and anthropogenic influences has significant effects on nearshore environments. When a coastal system is altered by human activity such as dredging, as is the case of the MS-AL coastal region, the natural state and processes are altered, and alongshore sediment transport can be disrupted. As a result of deeply dredged channels, adjacent island migration is blocked, nearshore environments downdrift in the littoral system become sediment starved, and sedimentation around the channels is modified. Sediment deposition and erosion are reflected through seafloor evolution. In a rapidly changing coastal environment, understanding historically where and why changes are occurring is essential. To better assess the comprehensive dynamics of the MS-AL coastal zone, a 160-year evaluation of the bathymetry and bathymetric change of the region was conducted.

Deflection of natural oil droplets through the water column in deep-water environments: The case of the Lower Congo Basin

NASA Astrophysics Data System (ADS)

Jatiault, Romain; Dhont, Damien; Loncke, Lies; de Madron, Xavier Durrieu; Dubucq, Dominique; Channelliere, Claire; Bourrin, François

2018-06-01

Numerous recurrent seep sites were identified in the deep-water environment of the Lower Congo Basin from the analysis of an extensive dataset of satellite-based synthetic-aperture radar images. The integration of current data was used to link natural oil slicks with active seep-related seafloor features. Acoustic Doppler current profiler measurements across the water column provided an efficient means to evaluate the horizontal deflection of oil droplets rising through the water column. Eulerian propagation model based on a range of potential ascension velocities helped to approximate the path for rising oil plume through the water column using two complementary methods. The first method consisted in simulating the reversed trajectory of oil droplets between sea-surface oil slick locations observed during current measurements and seep-related seafloor features while considering a range of ascension velocities. The second method compared the spatial spreading of natural oil slicks from 21 years of satellite monitoring observations for water depths ranging from 1200 to 2700 m against the modeled deflections during the current measurement period. The mapped oil slick origins are restricted to a 2.5 km radius circle from associated seep-related seafloor features. The two methods converge towards a range of ascension velocities for oil droplets through the water column, estimated between 3 and 8 cm s-1. The low deflection values validate that the sub-vertical projection of the average surface area of oil slicks at the sea surface can be used to identify the origin of expelled hydrocarbon from the seafloor, which expresses as specific seafloor disturbances (i.e. pockmarks or mounds) known to expel fluids.

Seafloor Control on Sea Ice

NASA Technical Reports Server (NTRS)

Nghiem, S. V.; Clemente-Colon, P.; Rigor, I. G.; Hall, D. K.; Neumann, G.

2011-01-01

The seafloor has a profound role in Arctic sea ice formation and seasonal evolution. Ocean bathymetry controls the distribution and mixing of warm and cold waters, which may originate from different sources, thereby dictating the pattern of sea ice on the ocean surface. Sea ice dynamics, forced by surface winds, are also guided by seafloor features in preferential directions. Here, satellite mapping of sea ice together with buoy measurements are used to reveal the bathymetric control on sea ice growth and dynamics. Bathymetric effects on sea ice formation are clearly observed in the conformation between sea ice patterns and bathymetric characteristics in the peripheral seas. Beyond local features, bathymetric control appears over extensive ice-prone regions across the Arctic Ocean. The large-scale conformation between bathymetry and patterns of different synoptic sea ice classes, including seasonal and perennial sea ice, is identified. An implication of the bathymetric influence is that the maximum extent of the total sea ice cover is relatively stable, as observed by scatterometer data in the decade of the 2000s, while the minimum ice extent has decreased drastically. Because of the geologic control, the sea ice cover can expand only as far as it reaches the seashore, the continental shelf break, or other pronounced bathymetric features in the peripheral seas. Since the seafloor does not change significantly for decades or centuries, sea ice patterns can be recurrent around certain bathymetric features, which, once identified, may help improve short-term forecast and seasonal outlook of the sea ice cover. Moreover, the seafloor can indirectly influence cloud cover by its control on sea ice distribution, which differentially modulates the latent heat flux through ice covered and open water areas.

Near-field observations of an offshore Mw 6.0 earthquake from an integrated seafloor and subseafloor monitoring network at the Nankai Trough, southwest Japan

NASA Astrophysics Data System (ADS)

Wallace, L. M.; Araki, E.; Saffer, D.; Wang, X.; Roesner, A.; Kopf, A.; Nakanishi, A.; Power, W.; Kobayashi, R.; Kinoshita, C.; Toczko, S.; Kimura, T.; Machida, Y.; Carr, S.

2016-11-01

An Mw 6.0 earthquake struck 50 km offshore the Kii Peninsula of southwest Honshu, Japan on 1 April 2016. This earthquake occurred directly beneath a cabled offshore monitoring network at the Nankai Trough subduction zone and within 25-35 km of two borehole observatories installed as part of the International Ocean Discovery Program's NanTroSEIZE project. The earthquake's location close to the seafloor and subseafloor network offers a unique opportunity to evaluate dense seafloor geodetic and seismological data in the near field of a moderate-sized offshore earthquake. We use the offshore seismic network to locate the main shock and aftershocks, seafloor pressure sensors, and borehole observatory data to determine the detailed distribution of seafloor and subseafloor deformation, and seafloor pressure observations to model the resulting tsunami. Contractional strain estimated from formation pore pressure records in the borehole observatories (equivalent to 0.37 to 0.15 μstrain) provides a key to narrowing the possible range of fault plane solutions. Together, these data show that the rupture occurred on a landward dipping thrust fault at 9-10 km below the seafloor, most likely on the plate interface. Pore pressure changes recorded in one of the observatories also provide evidence for significant afterslip for at least a few days following the main shock. The earthquake and its aftershocks are located within the coseismic slip region of the 1944 Tonankai earthquake (Mw 8.0), and immediately downdip of swarms of very low frequency earthquakes in this region, illustrating the complex distribution of megathrust slip behavior at a dominantly locked seismogenic zone.

The North Atlantic Data Portal: A Current Approach To Improving Marine Geophysical Data Discovery And Access

NASA Astrophysics Data System (ADS)

Jencks, J. H.; Cartwright, J.; Varner, J. D.

2016-12-01

Exploring, understanding, and managing the global oceans are a challenge when hydrographic maps are available for only 5% of the world's oceans. Seafloor mapping is expensive and most government and academic budgets continue to tighten. The first step for any mapping program, before setting out to map uncharted waters, should be to identify if data currently exist in the area of interest. There are many reasons why this seemingly simple suggestion is easier said than done.While certain datasets are accessible online (e.g., NOAA's NCEI, EMODnet, IHO-DCDB), many are not. In some cases, data that are publicly available are difficult to discover and access. No single agency can successfully resolve the complex and pressing demands of ocean and coastal mapping and the associated data stewardship. The National Oceanic and Atmospheric Administration (NOAA) is an active participant in numerous campaign mapping projects whose goals are to carry out coordinated and comprehensive ocean mapping efforts. One of these international programs is an outcome of the Galway Statement on Atlantic Ocean Cooperation signed by the European Union, Canada, and the United States in 2013. At NOAA's National Centers for Environmental Information (NCEI), resources are focused on ensuring the security and widespread availability of the Nation's scientific marine geophysical data through long-term stewardship. NCEI draws on a variety of software technologies and adheres to international standards to meet this challenge. The result is a geospatial framework built on spatially-enabled databases, standards-based web services, and International Standards Organization (ISO) metadata. Through the use of industry standards, the services are constructed such that they can be combined and re-used in a variety of contexts. For example, users may leverage the services in desktop analysis tools, web applications created by the hosting organizations (e.g. the North Atlantic Data Portal), or in custom applications they develop themselves. In order to maximize the return on campaign mapping investments, legacy and newly acquired data must be easily discoverable and readily accessible by numerous applications and formats now and well into the future. Working together, we can ensure that valuable data are made available to the broadest community.

3D Marine MT Modeling for a Topographic Seafloor

NASA Astrophysics Data System (ADS)

Zhang, B., Sr.; Yin, C.; Ren, X.; Liu, Y.; Huang, X.; Liu, L.

2017-12-01

As an effective geophysical tool, marine magnetotelluric (MMT) exploration has been widely used in offshore oil and gas exploration. Accordingly, the MMT forward modelling has made big progress. However, most of the researches are focused on a flat seafloor. In this paper, we present a 3D finite-element (FE) algorithm for marine MT forward modelling based on unstructured grids that can accurately model the MMT responses for a topographic seafloor. The boundary value problem for the forward modelling is described by an Helmholtz equation together with the boundary conditions derived by assuming the electrical polarizations respectively along the x- and y-direction on the top surface of the modelling domain. Applying the Galerkin method to the boundary value problem and substituting the unstructured finite-element vector shape function into the equation, we derive the final large linear system for the two polarizations, from which the EM fields is obtained for the calculation of impedance apparent resistivities and phases. To verify the effectiveness of our algorithm, we compare our modelling results with those by Key's (2013) 2D marine MT open source code of Scripps Institution of Oceanography (Figure 1). From Figure 1, one sees that the two agree well, implying that our 3D modelling method based unstructured FE is an effective modelling tool for topographic seafloor. From the MMT modelling responses for other topographic seafloor models (not shown here), we further observe that 1) the apparent resistivities have a similar profile pattern to the topography at the seafloor; 2) at the edges of the topography, there exist sharp changes; 3) the seafloor topography may dominate the responses from the abnormal bodies under the seafloor. This paper is supported by Key Program of National Natural Science Foundation of China (41530320), China Natural Science Foundation for Young Scientists (41404093), and Key National Research Project of China (2016YFC0303100, 2017YFC0601900)

2000 Multibeam Sonar Survey of Crater Lake, Oregon - Data, GIS, Images, and Movies

USGS Publications Warehouse

Gardner, James V.; Dartnell, Peter

2001-01-01

In the summer of 2000, the U.S. Geological Survey, Pacific Seafloor Mapping Project in cooperation with the National Park Service, and the Center for Coastal and Ocean Mapping, University of New Hampshire used a state-of-the-art multibeam sonar system to collect high-resolution bathymetry and calibrated, co-registered acoustic backscatter to support both biological and geological research in the Crater Lake area. This interactive CD-ROM contains the multibeam bathymetry and acoustic backscatter data, along with an ESRI ArcExplorer project (and software), images, and movies.

Seawater capacitance – a promising proxy for mapping and characterizing drifting hydrocarbon plumes in the deep ocean

USGS Publications Warehouse

Wynn, Jeff; Fleming, John A.

2012-01-01

Hydrocarbons released into the deep ocean are an inevitable consequence of natural seep, seafloor drilling, and leaking wellhead-to-collection-point pipelines. The Macondo 252 (Deepwater Horizon) well blowout of 2010 was even larger than the Ixtoc event in the Gulf of Campeche in 1979. History suggests it will not be the last accidental release, as deepwater drilling expands to meet an ever-growing demand. For those who must respond to this kind of disaster, the first line of action should be to know what is going on. This includes knowing where an oil plume is at any given time, where and how fast it is moving, and how it is evolving or degrading. We have experimented in the laboratory with induced polarization as a method to track hydrocarbons in the seawater column and find that finely dispersed oil in seawater gives rise to a large distributed capacitance. From previous sea trials, we infer this could potentially be used to both map and characterize oil plumes, down to a ratio of less than 0.001 oil-to-seawater, drifting and evolving in the deep ocean. A side benefit demonstrated in some earlier sea trials is that this same approach in modified form can also map certain heavy placer minerals, as well as communication cables, pipelines, and wrecks buried beneath the seafloor.

Tectonic map of the Circum-Pacific region, Pacific basin sheet

USGS Publications Warehouse

Scheibner, E.; Moore, G.W.; Drummond, K.J.; Dalziel, Corvalan Q.J.; Moritani, T.; Teraoka, Y.; Sato, T.; Craddock, C.

2013-01-01

Circum-Pacific Map Project: The Circum-Pacific Map Project was a cooperative international effort designed to show the relationship of known energy and mineral resources to the major geologic features of the Pacific basin and surrounding continental areas. Available geologic, mineral, and energy-resource data are being complemented by new, project-developed data sets such as magnetic lineations, seafloor mineral deposits, and seafloor sediment. Earth scientists representing some 180 organizations from more than 40 Pacific-region countries are involved in this work. Six overlapping equal-area regional maps at a scale of 1:10,000,000 form the cartographic base for the project: the four Circum-Pacific Quadrants (Northwest, Southwest, Southeast, and Northeast), and the Antarctic and Arctic Sheets. There is also a Pacific Basin Sheet at a scale of 1:17,000,000. The Base Map Series and the Geographic Series (published from 1977 to 1990), the Plate-Tectonic Series (published in 1981 and 1982), the Geodynamic Series (published in 1984 and 1985), and the Geologic Series (published from 1984 to 1989) all include six map sheets. Other thematic map series in preparation include Mineral-Resources, Energy-Resources and Tectonic Maps. Altogether, more than 50 map sheets are planned. The maps were prepared cooperatively by the Circum-Pacific Council for Energy and Mineral Resources and the U.S. Geological Survey and are available from the Branch of Distribution, U. S. Geological Survey, Box 25286, Federal Center, Denver, Colorado 80225, U.S.A. The Circum-Pacific Map Project is organized under six panels of geoscientists representing national earth-science organizations, universities, and natural-resource companies. The six panels correspond to the basic map areas. Current panel chairmen are Tomoyuki Moritani (Northwest Quadrant), R. Wally Johnson (Southwest Quadrant), Ian W.D. Dalziel (Antarctic Region), vacant. (Southeast Quadrant), Kenneth J. Drummond (Northeast Quadrant), and George W. Moore (Arctic Region). Project coordination and final cartography was being carried out through the cooperation of the Office of the Chief Geologist of the U.S. Geological Survey, under the direction of General Chairman, George Gryc of Menlo Park, California. Project headquarters were located at 345 Middlefield Road, MS 952, Menlo Park, California 94025, U.S.A. The framework for the Circum-Pacific Map Project was developed in 1973 by a specially convened group of 12 North American geoscientists meeting in California. The project was officially launched at the First Circum-Pacific Conference on Energy and Mineral Resources, which met in Honolulu, Hawaii, in August 1974. Sponsors of the conference were the AAPG, Pacific Science Association (PSA), and the Coordinating Committee for Offshore Prospecting for Mineral Resources in Offshore Asian Areas (CCOP). The Circum-Pacific Map Project operates as an activity of the Circum-Pacific Council for Energy and Mineral Resources, a nonprofit organization that promotes cooperation among Circum-Pacific countries in the study of energy and mineral resources of the Pacific basin. Founded by Michel T. Halbouty in 1972, the Council also sponsors conferences, topical symposia, workshops and the Earth Science Series books. Tectonic Map Series: The tectonic maps distinguish areas of oceanic and continental crust. Symbols in red mark active plate boundaries, and colored patterns show tectonic units (volcanic or magmatic arcs, arc-trench gaps, and interarc basins) associated with active plate margins. Well-documented inactive plate boundaries are shown by symbols in black. The tectonic development of oceanic crust is shown by episodes of seafloor spreading. These correlate with the rift and drift sequences at passive continental margins and episodes of tectonic activity at active plate margins. The recognized episodes of seafloor spreading seem to reflect major changes in plate kinematics. Oceanic plateaus and other prominences of greater than normal oceanic crustal thickness such as hotspot traces are also shown. Colored areas on the continents show the ages of deformation and metamorphism of basement rocks and the emplacement of igneous rocks. Transitional tectonic (molassic) and reactivation basins are shown by a colored boundary, and if they are deformed, a colored horizontal line pattern indicates the age of deformation. Colored bands along basin boundaries indicate age of inception, and isopachs indicate thickness of platform strata on continental crust and cover on oceanic crust. Colored patterns at separated continental margins show the age of inception of rift and drift (breakup) sequences. Symbols mark folds and faults, and special symbols show volcanoes and other structural features. Affiliations are as of compilation of the data. This map was created in quadrants and then compiled together. They are the Northwest land, Northwest Marine (different compilers), Northeast, Southwest and Southeast, and parts in plate-boundary sections.

The USGS role in mapping the nation's submerged lands

USGS Publications Warehouse

Schwab, Bill; Haines, John

2004-01-01

The seabed provides habitat for a diverse marine life having commercial, recreational, and intrinsic value. The habitat value of the seabed is largely a function of the geological structure and related geological, biological, oceanologic, and geochemical processes. Of equal importance, the nation's submerged lands contain energy and mineral resources and are utilized for the siting of offshore infrastructure and waste disposal. Seabed character and processes influence the safety and viability of offshore operations. Seabed and subseabed characterization is a prerequisite for the assessment, protection, and utilization of both living and non-living marine resources. A comprehensive program to characterize and understand the nation's submerged lands requires scientific expertise in the fields of geology, biology, hydrography, and oceanography. The U.S. Geological Survey (USGS) has long experience as the Federal agency charged with conducting geologic research and mapping in both coastal and offshore regions. The USGS Coastal and Marine Geology Program (CMGP) leads the nation in expertise related to characterization of seabed and subseabed geology, geological processes, seabed dynamics, and (in collaboration with the National Oceanic and Atmospheric Administration (NOAA) and international partners) habitat geoscience. Numerous USGS studies show that sea-floor geology and processes determine the character and distribution of biological habitats, control coastal evolution, influence the coastal response to storm events and human alterations, and determine the occurrence and concentration of natural resources.

A Seafloor Microbial Biome Hosted within Incipient Ferromanganese Crusts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Templeton, Alexis S.; Knowles, A. S.; Eldridge, D. L.

2009-11-15

Unsedimented volcanic rocks exposed on the seafloor at ridge systems and Seamounts host complex, abundant and diverse microbial communities that are relatively cosmopolitan in distribution (Lysnes, Thorseth et al. 2004; Mason, Stingl et al. 2007; Santelli, Orcutt et al. 2008). The most commonly held hypothesis is that the energy released by the hydration, dissolution and oxidative alteration of volcanic glasses in seawater drives the formation of an ocean crust biosphere (Thorseth, Furnes et al. 1992; Fisk, Giovannoni et al. 1998; Furnes and Staudigel 1999). The combined thermodynamically favorable weathering reactions could theoretically support anywhere from 105 to 109 cells/gram ofmore » rock depending upon the metabolisms utilized and cellular growth rates and turnover (Bach and Edwards 2003; Santelli, Orcutt et al. 2008). Yet microbially-mediated basalt alteration and energy conservation has not been directly demonstrated on the seafloor. By using synchrotron-based x-ray microprobe mapping, x-ray absorption spectroscopy and high-resolution scanning and transmission electron microscopy observations of young volcanic glasses recovered from the outer flanks of Loihi Seamount, we intended to identify the initial rates and mechanisms of microbial basalt colonization and bioalteration. Instead, here we show that microbial biofilms are intimately associated with ferromanganese crusts precipitating onto basalt surfaces from cold seawater. Thus we hypothesize that microbial communities colonizing seafloor rocks are established and sustained by external inputs of potential energy sources, such as dissolved and particulate Fe(II), Mn(II) and organic matter, rather than rock dissolution.« less

Investigating Hydrocarbon Seep Environments with High-Resolution, Three-Dimensional Geographic Visualizations.

NASA Astrophysics Data System (ADS)

Doolittle, D. F.; Gharib, J. J.; Mitchell, G. A.

2015-12-01

Detailed photographic imagery and bathymetric maps of the seafloor acquired by deep submergence vehicles such as Autonomous Underwater Vehicles (AUV) and Remotely Operated Vehicles (ROV) are expanding how scientists and the public view and ultimately understand the seafloor and the processes that modify it. Several recently acquired optical and acoustic datasets, collected during ECOGIG (Ecosystem Impacts of Oil and Gas Inputs to the Gulf) and other Gulf of Mexico expeditions using the National Institute for Undersea Science Technology (NIUST) Eagle Ray, and Mola Mola AUVs, have been fused with lower resolution data to create unique three-dimensional geovisualizations. Included in these data are multi-scale and multi-resolution visualizations over hydrocarbon seeps and seep related features. Resolution of the data range from 10s of mm to 10s of m. When multi-resolution data is integrated into a single three-dimensional visual environment, new insights into seafloor and seep processes can be obtained from the intuitive nature of three-dimensional data exploration. We provide examples and demonstrate how integration of multibeam bathymetry, seafloor backscatter data, sub-bottom profiler data, textured photomosaics, and hull-mounted multibeam acoustic midwater imagery are made into a series a three-dimensional geovisualizations of actively seeping sites and associated chemosynthetic communities. From these combined and merged datasets, insights on seep community structure, morphology, ecology, fluid migration dynamics, and process geomorphology can be investigated from new spatial perspectives. Such datasets also promote valuable inter-comparisons of sensor resolution and performance.

Multi-angle backscatter classification and sub-bottom profiling for improved seafloor characterization

NASA Astrophysics Data System (ADS)

Alevizos, Evangelos; Snellen, Mirjam; Simons, Dick; Siemes, Kerstin; Greinert, Jens

2018-06-01

This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r2 > 0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings.

A Volterra series-based method for extracting target echoes in the seafloor mining environment.

PubMed

Zhao, Haiming; Ji, Yaqian; Hong, Yujiu; Hao, Qi; Ma, Liyong

2016-09-01

The purpose of this research was to evaluate the applicability of the Volterra adaptive method to predict the target echo of an ultrasonic signal in an underwater seafloor mining environment. There is growing interest in mining of seafloor minerals because they offer an alternative source of rare metals. Mining the minerals cause the seafloor sediments to be stirred up and suspended in sea water. In such an environment, the target signals used for seafloor mapping are unable to be detected because of the unavoidable presence of volume reverberation induced by the suspended sediments. The detection of target signals in reverberation is currently performed using a stochastic model (for example, the autoregressive (AR) model) based on the statistical characterisation of reverberation. However, we examined a new method of signal detection in volume reverberation based on the Volterra series by confirming that the reverberation is a chaotic signal and generated by a deterministic process. The advantage of this method over the stochastic model is that attributions of the specific physical process are considered in the signal detection problem. To test the Volterra series based method and its applicability to target signal detection in the volume reverberation environment derived from the seafloor mining process, we simulated the real-life conditions of seafloor mining in a water filled tank of dimensions of 5×3×1.8m. The bottom of the tank was covered with 10cm of an irregular sand layer under which 5cm of an irregular cobalt-rich crusts layer was placed. The bottom was interrogated by an acoustic wave generated as 16μs pulses of 500kHz frequency. This frequency is demonstrated to ensure a resolution on the order of one centimetre, which is adequate in exploration practice. Echo signals were collected with a data acquisition card (PCI 1714 UL, 12-bit). Detection of the target echo in these signals was performed by both the Volterra series based model and the AR model. The results obtained confirm that the Volterra series based method is more efficient in the detection of the signal in reverberation than the conventional AR model (the accuracy is 80% for the PIM-Volterra prediction model versus 40% for the AR model). Copyright © 2016 Elsevier B.V. All rights reserved.

USGS advances in integrated, high-resolution sea-floor mapping: inner continental shelf to estuaries

USGS Publications Warehouse

Denny, J.F.; Schwab, W.C.; Twichell, D.C.; O'Brien, T.F.; Danforth, W.W.; Foster, D.S.; Bergeron, E.; Worley, C.W.; Irwin, B.J.; Butman, B.; Valentine, P.C.; Baldwin, W.E.; Morton, R.A.; Thieler, E.R.; Nichols, D.R.; Andrews, B.D.

2007-01-01

The U.S. Geological Survey (USGS) has been involved in geological mapping of the sea floor for the past thirty years. Early geophysical and acoustic mapping efforts using GLORIA (Geologic LOng Range Inclined ASDIC) a long-range sidescan-sonar system, provided broad-scale imagery of deep waters within the U.S. Exclusive Economic Zone (EEZ). In the early 1990's, research emphasis shifted from deep- to shallow-water environments to address pertinent coastal research and resource management issues. Use of shallow-water, high-resolution geophysical systems has enhanced our understanding of the processes shaping shallow marine environments. However, research within these shallow-water environments continues to present technological challenges.

Evaluation of arctic multibeam sonar data quality using nadir crossover error analysis and compilation of a full-resolution data product

NASA Astrophysics Data System (ADS)

Flinders, Ashton F.; Mayer, Larry A.; Calder, Brian A.; Armstrong, Andrew A.

2014-05-01

We document a new high-resolution multibeam bathymetry compilation for the Canada Basin and Chukchi Borderland in the Arctic Ocean - United States Arctic Multibeam Compilation (USAMBC Version 1.0). The compilation preserves the highest native resolution of the bathymetric data, allowing for more detailed interpretation of seafloor morphology than has been previously possible. The compilation was created from multibeam bathymetry data available through openly accessible government and academic repositories. Much of the new data was collected during dedicated mapping cruises in support of the United States effort to map extended continental shelf regions beyond the 200 nm Exclusive Economic Zone. Data quality was evaluated using nadir-beam crossover-error statistics, making it possible to assess the precision of multibeam depth soundings collected from a wide range of vessels and sonar systems. Data were compiled into a single high-resolution grid through a vertical stacking method, preserving the highest quality data source in any specific grid cell. The crossover-error analysis and method of data compilation can be applied to other multi-source multibeam data sets, and is particularly useful for government agencies targeting extended continental shelf regions but with limited hydrographic capabilities. Both the gridded compilation and an easily distributed geospatial PDF map are freely available through the University of New Hampshire's Center for Coastal and Ocean Mapping (ccom.unh.edu/theme/law-sea). The geospatial pdf is a full resolution, small file-size product that supports interpretation of Arctic seafloor morphology without the need for specialized gridding/visualization software.

Qualitative and quantitative processing of side-scan sonar data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dwan, F.S.; Anderson, A.L.; Hilde, T.W.C.

1990-06-01

Modern side-scan sonar systems allow vast areas of seafloor to be rapidly imaged and quantitatively mapped in detail. The application of remote sensing image processing techniques can be used to correct for various distortions inherent in raw sonography. Corrections are possible for water column, slant-range, aspect ratio, speckle and striping noise, multiple returns, power drop-off, and for georeferencing. The final products reveal seafloor features and patterns that are geometrically correct, georeferenced, and have improved signal/noise ratio. These products can be merged with other georeferenced data bases for further database management and information extraction. In order to compare data collected bymore » different systems from a common area and to ground truth measurements and geoacoustic models, quantitative correction must be made for calibrated sonar system and bathymetry effects. Such data inversion must account for system source level, beam pattern, time-varying gain, processing gain, transmission loss, absorption, insonified area, and grazing angle effects. Seafloor classification can then be performed on the calculated back-scattering strength using Lambert's Law and regression analysis. Examples are given using both approaches: image analysis and inversion of data based on the sonar equation.« less

A Sea-Floor Mystery: Mapping Polarity Reversals. Crustal Evolution Education Project. Teacher's Guide [and] Student Investigation.

ERIC Educational Resources Information Center

Stoever, Edward C., Jr.

Crustal Evolution Education Project (CEEP) modules were designed to: (1) provide students with the methods and results of continuing investigations into the composition, history, and processes of the earth's crust and the application of this knowledge to man's activities and (2) to be used by teachers with little or no previous background in the…

Geologic evidence for onshore sediment transport from the inner continental shelf: Fire Island, New York

USGS Publications Warehouse

Schwab, William C.; Baldwin, Wayne E.; Hapke, Cheryl J.; Lentz, Erika E.; Gayes, Paul T.; Denny, Jane F.; List, Jeffrey H.; Warner, John C.

2013-01-01

Sediment budget analyses along the south shore of Fire Island, New York, have been conducted and debated in the scientific and coastal engineering literature for decades. It is well documented that a primary component of sediment transport in this system is directed alongshore from E to W, but discrepancies in volumetric sediment budget calculations remain. An additional quantity of sand, averaging about 200,000 m3/y is required to explain the growth of the western segment of the barrier island, a prograding spit. Littoral sediment derived from updrift erosion of the coast, addition of beach nourishment fill, and onshore transport of inner continental shelf, shoreface sediments, or both have all been proposed as potential sources of the additional sediment needed to balance the sediment budget deficit. Analysis of high-resolution seafloor mapping data collected in 2011, including seismic reflection profiles and inteferometric sonar acoustic backscatter and swath bathymetry; comparison with seafloor mapping data collected in 1996–1997; and shoreline change analysis from 1933 to 2011 support previous suggestions that the inner-shelf Holocene sedimentary deposit is a likely source to resolve this sediment budget discrepancy.

Lava Morphology Classification of a Fast-Spreading Ridge Using Deep-Towed Sonar Data: East Pacific Rise

NASA Astrophysics Data System (ADS)

Meyer, J.; White, S.

2005-05-01

Classification of lava morphology on a regional scale contributes to the understanding of the distribution and extent of lava flows at a mid-ocean ridge. Seafloor classification is essential to understand the regional undersea environment at midocean ridges. In this study, the development of a classification scheme is found to identify and extract textural patterns of different lava morphologies along the East Pacific Rise using DSL-120 side-scan and ARGO camera imagery. Application of an accurate image classification technique to side-scan sonar allows us to expand upon the locally available visual ground reference data to make the first comprehensive regional maps of small-scale lava morphology present at a mid-ocean ridge. The submarine lava morphologies focused upon in this study; sheet flows, lobate flows, and pillow flows; have unique textures. Several algorithms were applied to the sonar backscatter intensity images to produce multiple textural image layers useful in distinguishing the different lava morphologies. The intensity and spatially enhanced images were then combined and applied to a hybrid classification technique. The hybrid classification involves two integrated classifiers, a rule-based expert system classifier and a machine learning classifier. The complementary capabilities of the two integrated classifiers provided a higher accuracy of regional seafloor classification compared to using either classifier alone. Once trained, the hybrid classifier can then be applied to classify neighboring images with relative ease. This classification technique has been used to map the lava morphology distribution and infer spatial variability of lava effusion rates along two segments of the East Pacific Rise, 17 deg S and 9 deg N. Future use of this technique may also be useful for attaining temporal information. Repeated documentation of morphology classification in this dynamic environment can be compared to detect regional seafloor change.

Habitat characterization of the Vema Fracture Zone and Puerto Rico Trench

NASA Astrophysics Data System (ADS)

Devey, C. W.; Augustin, N.; Brandt, A.; Brenke, N.; Köhler, J.; Lins, L.; Schmidt, C.; Yeo, I. A.

2018-02-01

Although many of the regions on and close to the mid-ocean ridges have been extensively mapped and sampled, the abyssal intraplate regions remain essentially unsampled and unmapped, leaving huge gaps in our understanding of their geologic history and present activity. Prominent bathymetric features in these intraplate regions are fracture zones. Here we present bathymetric and sampling information from a transatlantic transect along the Vema Fracture Zone (ca. 11°N), covering crustal ages from 109 - 0 Ma on the African plate and 0-62 Ma on the South American plate. The Vema Fracture Zone is the intraplate trace of the active Vema Transform plate boundary, which offsets the present-day Mid-Atlantic Ridge by ca. 300 km left-laterally, juxtaposing zero-age crust with crust of 20 million years age. Our results show clear evidence of tectonic activity along most of the Fracture Zone, in most places likely associated with active fluid flow. Within the active Vema Transform at crustal ages of ca. 10 Ma we found clear indications of fluid flow both in the sediments and the overlying water column. This region is > 120 km from the nearest spreading axis and increases by almost an order of magnitude the maximum off-axis distance that active hydrothermal discharge has been found on the oceanic crust. Sampling of the igneous seafloor was possible at all crustal ages and the accretionary fabric imprinted on the plate during its production was prominent everywhere. Seafloor sediments show signs of extensive bioturbation. In one area, high concentrations of spherical Mn-nodules were also found and sampled. At the end of the transect we also mapped and sampled the Puerto Rico Trough, a > 8000 m-deep basin north of the Caribbean arc. Here the seafloor morphology is more complicated and strongly influenced by transpressive tectonics.

Sedimentary facies, geomorphic features and habitat distribution at the Hudson Canyon head from AUV multibeam data

NASA Astrophysics Data System (ADS)

Pierdomenico, Martina; Guida, Vincent G.; Macelloni, Leonardo; Chiocci, Francesco L.; Rona, Peter A.; Scranton, Mary I.; Asper, Vernon; Diercks, Arne

2015-11-01

Mapping of physical benthic habitats at the head of Hudson Canyon was performed by means of integrated analysis of acoustic data, video surveys and seafloor sampling. Acoustic mapping, performed using AUV-mounted multibeam sonar, provided ultra-high resolution bathymetric and backscatter imagery for the identification of geomorphological features and the characterization of surficial sediments. Habitat characterization in terms of seafloor texture and identification of benthic and demersal communities was accomplished by visual analysis of still photographs from underwater vehicles. Habitat classes were defined on the basis of the seafloor texture observed on photos and then compared with the geophysical data in order to associate habitats to acoustic classes and/or geomorphological features. This enabled us to infer habitat distribution on the basis of morpho-acoustic classes and extrapolate results over larger areas. Results from bottom trawling were used to determine the overall biodiversity within the identified habitats. Our analysis revealed a variety of topographic and sedimentological structures that provide a wide range of physical habitats. A variety of sandy and muddy substrates, gravel patches and mudstone outcrops host rich and varied faunal assemblages, including cold-water corals and sponge communities. Pockmark fields below 300 m depth suggest that methane-based chemosynthetic carbonate deposition may contributes to creation of specific benthic habitats. Hummocky terrain has been delineated along the canyon rims and associated with extensive, long-term burrowing activity by golden tilefish (Lopholatilus chamaeleonticeps). These results show the relationships of physical features to benthic habitat variation, support the notion of the area as a biodiversity hotspot and define essential habitats for planning of sustainable regional fisheries.

New Seafloor Map of the Puerto Rico Trench Helps Assess Earthquake and Tsunami Hazards

NASA Astrophysics Data System (ADS)

ten Brink, Uri; Danforth, William; Polloni, Christopher; Andrews, Brian; Llanes, Pilar; Smith, Shepard; Parker, Eugene; Uozumi, Toshihiko

2004-09-01

The Puerto Rico Trench, the deepest part of the Atlantic Ocean, is located where the North American (NOAM) plate is subducting under the Caribbean plate (Figure 1). The trench region may pose significant seismic and tsunami hazards to Puerto Rico and the U.S. Virgin Islands, where 4 million U.S. citizens reside. Widespread damage in Puerto Rico and Hispaniola from an earthquake in 1787 was estimated to be the result of a magnitude 8 earthquake north of the islands. A tsunami killed 40 people in NW Puerto Rico following a magnitude 7.3 earthquake in 1918. Large landslide escarpments have been mapped on the seafloor north of Puerto Rico, although their ages are unknown. The Puerto Rico Trench is atypical of oceanic trenches. Subduction is highly oblique (10°-20°) to the trench axis with a large component of left-lateral strike-slip motion. Similar convergence geometry is observed at the Challenger Deep in the Mariana Trench, the deepest point on Earth. In addition to its extremely deep seafloor, the Puerto Rico Trench is also characterized by the most negative free-air gravity anomaly on Earth, -380 mGal, located 50 km south of the trench, where water depth is 7950 m (Figure 2). A tilted carbonate platform provides evidence for extreme vertical tectonism in the region. This platform was horizontally deposited over Cretaceous to Paleocene arc rocks starting in the Late Oligocene. Then, at 3.5 Ma, the carbonate platform was tilted by 4° toward the trench over a time period of less than 40 kyr, such that its northern edge is at a depth of 4000 m and its reconstructed elevation on land in Puerto Rico is at +1300 m (Figures 1 and 2).

Seafloor mapping of the southeast Iberian margin (from Cabo de Palos to Cabo de Gata)

NASA Astrophysics Data System (ADS)

Lastras, Galderic; Leon, César; Elvira, Elena; Pascual, Laura; Muñoz, Araceli; de Cárdenas, Enrique; Acosta, Juan; Canals, Miquel

2014-05-01

We present the multibeam bathymetry and derived maps of the southeast Iberian margin from Cabo de Palos to Cabo de Gata, 37º35'N to 35º45'N and 2º10'W to 0º20'E, from the coastline down to the Algero-Balearic abyssal plain at depths exceeding 2600 m. The edition of of the maps is carried out within the Complementary Action VALORPLAT ("Scientific valorisation of multibeam bathymetry data from the Spanish continental shelf and slope"), funded by the Spanish Ministry of Economy and Competitivity. The multibeam bathymetry data of the slope and abyssal plain were obtained during different surveys in 2004, 2006 and 2007 on board R/V Vizconde de Eza with a Simrad EM300 multibeam echo-sounder as part of the CAPESME Project, a collaboration between the Spanish Institute of Oceanography (IEO) and General Secretariat of Fisheries (SGP), primarily aiming at creating maps of the fishing grounds of the Mediterranean continental margins of Spain. Multibeam bathymetry data from the continental shelf were obtained within the ESPACE project, also in a cooperative frame between IEO and SGP. The map series is constituted by a general map at 1:400,000 scale and 14 detailed maps at 1:75,000 scale, which include inset maps on slope gradients and seafloor nature (rock or sediment type), the later obtained with rock dredges and Shipeck sediment dredges. Both the detailed maps and the general map are available in paper print, and the whole collection is also distributed in an edited USB. The geological features displayed in the different maps include the continental shelf, with abundant geomorphic features indicative of past sea-level changes, the continental slope carved by the Palos, Tiñoso, Cartagena Este, Cartagena Oeste, Águilas, Almanzora, Alias, Garrucha and Gata submarine canyons, the Mazarrón, Palomares and Al-Mansour escarpments, the Abubácer, Maimonides and Yusuf ridges, the Águilas and Al-Mansour seamounts, and the Algero-Balearic abyssal plain where prominent halokinetic deformation structures have been observed. The edited maps are available from the MAGRAMA (Ministerio de Agricultura, Alimentación y Medio Ambiente) publication store (https://aplicaciones.magrama.es/tienda/index.jsp).

Observations of Seafloor Roughness in a Tidally Modulated Inlet

NASA Astrophysics Data System (ADS)

Lippmann, T. C.; Hunt, J.

2014-12-01

The vertical structure of shallow water flows are influenced by the presence of a bottom boundary layer, which spans the water column for long period waves or mean flows. The nature of the boundary is determined in part by the roughness elements that make up the seafloor, and includes sometimes complex undulations associated with regular and irregular shaped bedforms whose scales range several orders of magnitude from orbital wave ripples (10-1 m) to mega-ripples (100 m) and even larger features (101-103) such as sand waves, bars, and dunes. Modeling efforts often parameterize the effects of roughness elements on flow fields, depending on the complexity of the boundary layer formulations. The problem is exacerbated by the transient nature of bedforms and their large spatial extent and variability. This is particularly important in high flow areas with large sediment transport, such as tidally dominated sandy inlets like New River Inlet, NC. Quantification of small scale seafloor variability over large spatial areas requires the use of mobile platforms that can measure with fine scale (order cm) accuracy in wide swaths. The problem is difficult in shallow water where waves and currents are large, and water clarity is often limited. In this work, we present results from bathymetric surveys obtained with the Coastal Bathymetry Survey System, a personal watercraft equipped with a Imagenex multibeam acoustic echosounder and Applanix POS-MV 320 GPS-aided inertial measurement unit. This system is able to measure shallow water seafloor bathymetry and backscatter intensity with very fine scale (10-1 m) resolution and over relatively large scales (103 m) in the presence of high waves and currents. Wavenumber spectra show that the noise floor of the resolved multibeam bathymetry is on the order of 2.5 - 5 cm in amplitude, depending on water depths ranging 2 - 6 m, and about 30 cm in wavelength. Seafloor roughness elements are estimated from wavenumber spectra across the inlet from bathymetric maps of the seafloor obtained with 10-25 cm horizontal resolution. Implications of the effects of the bottom variability on the vertical structure of the currents will be discussed. This work was supported by ONR and NOAA.

GeoMapApp Learning Activities: A Virtual Lab Environment for Student-Centred Engagement with Geoscience Data

NASA Astrophysics Data System (ADS)

Kluge, S.; Goodwillie, A. M.

2012-12-01

As STEM learning requirements enter the mainstream, there is benefit to providing the tools necessary for students to engage with research-quality geoscience data in a cutting-edge, easy-to-use map-based interface. Funded with an NSF GeoEd award, GeoMapApp Learning Activities ( http://serc.carleton.edu/geomapapp/collection.html ) are being created to help in that endeavour. GeoMapApp Learning Activities offer step-by-step instructions within a guided inquiry approach that enables students to dictate the pace of learning. Based upon GeoMapApp (http://www.geomapapp.org), a free, easy-to-use map-based data exploration and visualisation tool, each activity furnishes the educator with an efficient package of downloadable documents. This includes step-by-step student instructions and answer sheet; an educator's annotated worksheet containing teaching tips, additional content and suggestions for further work; and, quizzes for use before and after the activity to assess learning. Examples of activities so far created involve calculation and analysis of the rate of seafloor spreading; compilation of present-day evidence for huge ancient landslides on the seafloor around the Hawaiian islands; a study of radiometrically-dated volcanic rocks to help understand the concept of hotspots; and, the optimisation of contours as a means to aid visualisation of 3-D data sets on a computer screen. The activities are designed for students at the introductory undergraduate, community college and high school levels, and present a virtual lab-like environment to expose students to content and concepts typically found in those educational settings. The activities can be used in the classroom or out of class, and their guided nature means that the requirement for teacher intervention is reduced thus allowing students to spend more time analysing and understanding geoscience data, content and concepts. Each activity is freely available through the SERC-Carleton web site.

The Crustal Magnetization Mapping in the Ocean Basin of the South China Sea and its Tectonic Implications

NASA Astrophysics Data System (ADS)

Guo, L.; Meng, X.

2015-12-01

The South China Sea (SCS), surrounded by the Eurasia, Pacific and India-Australia plates, was formed by the interaction of the three plates and the Cenozoic seafloor spreading. Magnetic data is the crucial data for understanding tectonic evolution and seafloor spreading model in the SCS. Magnetization intensity is related closely to rock type and tectonics. Through magnetization mapping, the distribution of apparent magnetization in the subsurface will be obtained, benefiting in lithologic classification and geological mapping. Due to strong remanence presented in the oceanic crust, magma and seamounts in the SCS, the magnetization directions are complex and heterogeneous, quite different from the modern geomagnetic field directions. However, the routine techniques for magnetization mapping are based on negligence of remanence. The normalized source strength (NSS), one quantity transformed from the magnetic anomalies, is insensitive to remanence and responds well to the true locations of magnetic sources. The magnetization mapping based on the NSS will effectively reduce effects of remanence, benefitting in better geological interpretation. Here, we assembled high-resolution total magnetic intensity (TMI) data around the ocean basin of the SCS, and then transformed them into the NSS. Then we did magnetization mapping based on the NSS to obtain the crustal magnetization distribution in the studied area. The results show that the magnetization distribution inside of each subbasin is relatively homogeneous, but that of eastern subbasin is mostly strong with amplitude of 0.2A/m~4.2A/m, while that of southwestern subbasin is weak with amplitude of 0.2A/m~1.1A/m. It implies that magnetic structure and tectonic features in the crust are discriminative between both subbasins, and the tectonic boundary between both subbasins is roughly ranges from the northeastern edge of the Zhongsha Islands running in the southeast direction to the northeastern edge of the Reed Bank.

Thriving reefs in the Baltic? Diversity and small-scale variability of hard-bottom assemblages along natural and anthropogenic gradients in the German Baltic Sea

NASA Astrophysics Data System (ADS)

Beisiegel, K.; Zettler, M. L.; Darr, A.; Schiele, K.; Schwarzer, K.; Richter, P.

2016-02-01

Since the vast majority of global seafloor habitats are characterized by soft sediments, hard substrata represent rarities hosting species and functional groups not found elsewhere. The same holds true for the enclosed and brackish Baltic Sea, where hard substrata occur patchy and infrequent. Subtidal low-relief terrains with homogenous mud and sand flats form the predominant benthic substrate and the associated infaunal communities are well described. In contrast, the diverse, primarily epibenthic assemblages on subtidal hard bottoms received far less attention. Since 2011 a team of geologists and biologists aims to map the subtidal habitats and biotopes. On joint cruises, geologists use side scan sonar to map the seafloor sediments while ground truthing is performed in collaboration with biologists. Biogenic concretions like mussel beds and hard structures of geogenic origin like stones and glacial boulders form the predominant hard substrata in the German Baltic Sea. These habitats are subsequently investigated using frame sampling by SCUBA diving, dredges or towed photo/video platforms. The type of hard substratum, salinity and light availability seem to be the most important natural factors that determine the epibenthic community composition. Identified geological substrata and biological communities are matched with biotopes of the HELCOM Underwater biotope and habitat classification system. Predictive modeling approaches are used to generate biotope specific distribution patterns, based on biological point samples, area-wide sediment distribution maps and measured/modeled environmental parameters. The resulting hard-bottom biotope maps, combining geological and biological information, complement the existing area-wide biotope map of soft sediment communities. The maps are important tools both for the scientific community to understand the functioning of marine ecosystems as well as for nature conservation, e.g. for the implementation of MPA management plans and for the development of monitoring concepts and the red list classification of biotopes.

MAREANO: The national seafloor mapping programme of Norway - providing new knowledge for making informed management decisions

NASA Astrophysics Data System (ADS)

Thorsnes, T.; Bjarnadóttir, L. R.

2017-12-01

MAREANO (Marine AREA database for NOrwegian waters) is a state funded programme that has been mapping the seabed in Norwegian waters since 2005. Core datasets include detailed bathymetric data, video transect data and physical samples of the seabed. Integrated knowledge of the geology, habitats and the environmental status of the seabed is gained from the combined datasets and all results are presented on www.mareano.no. The results from MAREANO serve as a baseline of scientific information for decision-makers and which is actively used by ocean management agencies. Since 2005 the programme has grown and matured a great deal. Funding has increased twentyfold (now about 13 mill. USD), and the size of seabed mapped is now tenfold (about 22000 km2 annually). With this expansion the programme has evolved a more complex structure, regulating its activities more strictly and adhering to long-term plans. During this time the number of products has also increased, and so has the need for reviewing and improving methods. In 2015 MAREANO prepared a comprehensive report which documented and evaluated current methods and reviewed sampling/mapping standards based on management needs. Whilst the methods adopted by MAREANO to date have largely proved effective, several recent advances in technology within the various fields of seabed mapping offer great potential for improvements. Since 2014 MAREANO has been testing out some of this new technology such as acquisition of seabed data with improved resolution and autonomy in data collection, using AUVs equipped with synthetic aperture sonar and ROVs with underwater hyperspectral-sensors. Recently, MAREANO scientists have also been exploring new, more automated methods for data interpretation, classification and modelling. Preliminary results are promising and these new methods are expected to help to streamline the map production workflow in the future, thereby reducing production costs, while making even better maps that are both reproducible and more statistically robust. With its vast experience within seafloor mapping, MAREANO strives to prioritize dissemination of results through multiple channels, nationally and internationally. Currently MAREANO is also reaching out to the global community through the MAREAGLO initiative in order to share the MAREANO method.

The Deep-Sea and Sub-Seafloor Frontier initiative - a key to link EC research and international scientific ocean drilling

NASA Astrophysics Data System (ADS)

Kopf, A.

2009-04-01

The Deep-Sea and Sub-Seafloor Frontiers project, DS3F, represents the continuation of the DSF roadmap towards the sustainable management of oceanic resources on a European scale. It will develop strategies for sub-seafloor sampling to contribute to a better understanding of deep-sea and sub-seafloor processes by connecting marine research in life and geosciences, climate and environmental change, as well as socio-economic issues and policy building. We propose to establish a long-lived research approach that considers (i) the need for a sustainable management of the ocean, and particularly the deep sea with enhanced activity (fishery, hydrocarbon exploration), (ii) the necessity to unravel deep-seated geological processes that drive seafloor ecosystems, and (iii) the value of seabed archives for the reconstruction of paleo-environmental conditions and the improved prediction of future climate change. Sub-seafloor drilling and sampling can provide two key components in understanding how deep-sea ecosystems function at present, and how they will respond to global change: (a) an inventory of present subsurface processes and biospheres, and their links to surface ecosystems, including seafloor observation and baseline studies, and (b) a high resolution archive of past variations in environmental conditions and biodiversity. For both components, an international effort is needed to share knowledge, methods and technologies, including mission-specific platforms to increase the efficiency, coverage and accuracy of sub-seafloor sampling and exploration. The deep biosphere has been discovered only within the past two decades and comprises the last major frontier for biological exploration. We lack fundamental knowledge of composition, diversity, distribution and metabolism in sub-seafloor biological communities at Earth's extremes, and their repercussions on seafloor ecosystems and life in the deep sea. There is equally an emerging need to shed light on geodynamic processes fuelling biological activity, and how such processes tie into the emission of geofuels and the formation of hydrocarbons and other resources. In addition, geodynamic processes may be cause natural hazards such as earthquake slip, submarine landslides, or tsunamis with a profound effect for humans and ecosystems. Their governing principles and potential triggers are poorly understood and often related to the sub-seafloor environment. In summary, the three main research areas in the Integrated Ocean Drilling Program (IODP; see Initial Science Plan www.iodp.org/isp/), i.e. geodynamics, climate and deep biosphere, as well as the goals of DS3F show a strong overlap and suggest an emerging need to join forces. This will result in the most efficient use of sub-seafloor sampling techniques and existing marine infrastructure to study the geosystem and its effects on biosphere and marine ecosystems. The DS3F initiative aims at providing a comprehensive "white paper" for a sustainable use of the oceans, an European Maritime Policy, and a strong link between European mission-specific drilling projects including IODP, IMAGES, ESF-EuroMARC and EC campaigns.

Intense gas bubble emissions in the Kerch seep area - A newly discovered high-flux seep site in the Black Sea

NASA Astrophysics Data System (ADS)

Römer, M.; Sahling, H.; Pape, T.; Bahr, A.; Feseker, T.; Wintersteller, P.; Bohrmann, G.

2012-04-01

More than 500 bubble-induced hydroacoustic anomalies (flares) were found in the water column above the seafloor in the study area comprising about 430 km2 at the Don-Kuban paleo-fan (Eastern Black Sea) by using ship mounted single beam and multibeam echosounders. Almost all flares originated from the seafloor above the gas hydrate stability zone (GHSZ), which in that region is located below ~700 m water depth. This observation confirms the sealing mechanism of gas hydrate, which impedes migration of free gas through the GHSZ and subsequent bubble emission from the seafloor. However, an intense seep site, called the "Kerch seep area" was discovered as an exception at 890 m water depth well within the GHSZ. In situ temperature measurements in shallow sediments indicate locally elevated temperatures probably caused by enhanced upward fluid flow. The base of the GHSZ in this region is generally situated at about 150 m below the seafloor. However, the local thermal anomalies result in a thinning of the gas hydrate occurrence zone to only a few meters below the seafloor and allow free gas to reach the seafloor. At sites where gas migrated into near-surface deposits, shallow gas hydrate deposits evolved and up-doming of overlying sediments led to the formation of mounds rising several meters from the surrounding seafloor. Further gas bubbles ascending from greater depth are accumulated below the gas hydrate layer at the base of the mound structures and migrate horizontally to their rims. At the mound edges gas bubbles either might form fresh gas hydrates and increase the extent of the mound structures by pushing up overlying sediments or escape at several sites into the water column. Two mounds were mapped in ultra-high resolution during dives with the autonomous underwater vehicle 'AUV MARUM SEAL 5000'. Several individual flares were detected in the Kerch seep area using hydroacoustic systems. Repeated surveys in that area conducted during three cruises within four years suggested that gas discharge varied spatially and temporally while the total number of flares remained rather constant. During seafloor inspections with MARUḾs remotely operated vehicle 'ROV QUEST 4000 m' gas bubble emission sites were investigated in detail. Gas bubbles collected during the ROV dives mainly consisted of methane predominantly of microbial origin. By analyzing the high-definition video material the gas flux from several bubble emission sites was calculated. In combination with the hydroacoustic results (flare distributions) it is estimated that about 2.2 - 87 × 106 mol CH4/yr are emitted from the seafloor at the Kerch seep area. Despite this high mass of methane injected into the hydrosphere, the peak of the highest flares at ~350 m water depth as revealed by echosounder recording suggest that the ascending methane completely dissolves in the water column and does not pass the sea-atmosphere boundary.

Mapping lava morphology of the Galapagos Spreading Center at 92°W: fuzzy logic provides a classification of high-resolution bathymetry and backscatter

NASA Astrophysics Data System (ADS)

McClinton, J. T.; White, S. M.; Sinton, J. M.; Rubin, K. H.; Bowles, J. A.

2010-12-01

Differences in axial lava morphology along the Galapagos Spreading Center (GSC) can indicate variations in magma supply and emplacement dynamics due to the influence of the adjacent Galapagos hot spot. Unfortunately, the ability to discriminate fine-scale lava morphology has historically been limited to observations of the small coverage areas of towed camera surveys and submersible operations. This research presents a neuro-fuzzy approach to automated seafloor classification using spatially coincident, high-resolution bathymetry and backscatter data. The classification method implements a Sugeno-type fuzzy inference system trained by a multi-layered adaptive neural network and is capable of rapidly classifying seafloor morphology based on attributes of surface geometry and texture. The system has been applied to the 92°W segment of the western GSC in order to quantify coverage areas and distributions of pillow, lobate, and sheet lava morphology. An accuracy assessment has been performed on the classification results. The resulting classified maps provide a high-resolution view of GSC axial morphology and indicate the study area terrain is approximately 40% pillow flows, 40% lobate and sheet flows, and 10% fissured or faulted area, with about 10% of the study area unclassifiable. Fine-scale features such as eruptive fissures, tumuli, and individual pillowed lava flow fronts are also visible. Although this system has been applied to lava morphology, its design and implementation are applicable to other undersea mapping applications.

High Resolution Seafloor Environmental Characterization of Methane Seeps in the Mississippi Canyon Near Atwater Valley 13/14, Gulf of Mexico.

NASA Astrophysics Data System (ADS)

Gardner, J. M.; Hagen, R.; Hart, P.; Czarnecki, M.; Nishimura, C.; Hutchinson, D. R.

2005-12-01

The purpose of this project was to conduct detailed surface mapping of one of the areas drilled by the Joint Industry Project with ChevronTexaco to understand gas hydrates in the Gulf of Mexico. The gently sloping, mostly flat floor of the Mississippi Canyon is interrupted by mounds and depressions that presumably reflect the complex geology and geohydrology related to turbidite deposition and pervasive salt tectonism. The seafloor mounds we mapped in this study occur in approximately 1300 water depth along the floor of the Mississippi Canyon in lease block areas Atwater Valley 13 and 14. High resolution sidescan sonar (100 kHz and 500 kHz) backscatter imagery, and chirp sub-bottom profiler data were collected using the DT1 deep-towed oceanographic mapping instrument, concentrating on the region directly adjacent to and surrounding two mounds identified as, mounds D and F, and in the region directly adjacent to and surrounding the mounds. The backscatter data have been mosaiced and normalized to provide information on the shape and extent of the mounds, the possible lateral extent of fauna, such as mussel and clam fields on the mounds, possible seep related flows and the occurrence of carbonate material. The extent of a mudflow can be mapped on the southeastern side of mound F. Previously collected bottom camera images have been used to ground-truth the backscatter information. Coincident with the collection of backscatter information was the collection of very high-resolution bathymetric data. Together, the backscatter and bathymetric data show extremely high-resolution detail about the shape, relief, and morphology of the mounds. This information, coupled with porewater chemistry and heatflow data form a coherent picture of possible mechanics for fluid venting and flora/fauna of the seeps in this region.

The Smallest R/V: A Small-scale Ocean Exploration Demonstration of Real-time Bathymetric Measurements

NASA Astrophysics Data System (ADS)

Howell, S. M.; Boston, B.; Maher, S. M.; Sleeper, J. D.; Togia, H.; Tree, J. P.

2014-12-01

In October 2013, graduate student members of the University of Hawaii Geophysical Society designed a small-scale model research vessel (R/V) that uses sonar to create 3D maps of a model seafloor in real-time. This pilot project was presented to the public at the School of Ocean and Earth Science and Technology's (SOEST) Biennial Open House weekend. An estimated 7,600 people attended the two-day event, including children and teachers from Hawaii's schools, home school students, community groups, families, and science enthusiasts. Our exhibit demonstrated real-time sonar mapping of a cardboard volcano using a toy size research vessel on a fixed 2D model ship track suspended above a model seafloor. Sound wave travel times were recorded using an unltrasonic emitter/receiver attached to an Arduino microcontroller platform, while the same system measured displacement along the ship track. This data was streamed through a USB connection to a PC running MatLab, where a 3D model was updated as the ship collected data. Our exhibit demonstrates the practical use of complicated concepts, like wave physics and data processing, in a way that even the youngest elementary students are able to understand. It provides an accessible avenue to learn about sonar mapping, and could easily be adapted to talk about bat and marine mammal echolocation by replacing the model ship and volcano. The exhibit received an overwhelmingly positive response from attendees, and has inspired the group to develop a more interactive model for future exhibitions, using multiple objects to be mapped that participants could arrange, and a more robust ship movement system that participants could operate.

Undergraduates Conducting Research Using High-Resolution Multibeam and Sidescan Sonar to Map and Characterize the Seabed: the BEAMS Program

NASA Astrophysics Data System (ADS)

Harris, M. S.; Sautter, L.

2017-12-01

The College of Charleston's BEnthic Acoustic Mapping and Survey (BEAMS) Program has just completed its 10th year of operation, and has proven to be remarkably effective at activating and maintaining undergraduate student interest in conducting research using sophisticated software, state-of-the-art instrumentation, enormous datasets, and significant experiential time. BEAMS students conduct research as part of a minimum 3-course sequence of marine geology-based content, marine geospatial software, and seafloor research courses. Over 140 students have completed the program, 56% of the graduated students remain active in the marine geospatial workforce or academic arenas. Forty-eight percent (48%) of those students are female. As undergraduates, students not only conduct independent research projects, but present their work at national conferences each year. Additionally, over 90 % of all "BEAMers" have been provided a 2-3 day at-sea experience on a dedicated BEAMS Program multibeam survey research cruise, and many students also volunteer as survey technicians aboard NOAA research vessels. Critical partnerships have developed with private industry to provide numerous collaborative opportunities and an employment/employer pipeline, as well as provision of software and hardware at many fiscal levels. Ongoing collaboration with the Marine Institute of Ireland and the National and Kapodistrian University of Athens has also provided valuable field opportunities and collaborative experiences. This talk will summarize the program while highlighting some of the key areas and topics investigated by students, including detailed geomorphologic studies of continental margins, submarine canyons, tectonic features and seamounts. Students also work with NOAA investigators to aid in the characterization of fish and deep coral habitats, and with BOEM researchers to study offshore windfield suitability and submerged cultural landscapes. Our sister program at the University of Washington will also be discussed, as will developing relationships with our international and private industry partners.

Sand waves at the mouth of San Francisco Bay, California

USGS Publications Warehouse

Barnard, Patrick L.; Hanes, Daniel M.; Kvitek, Rikk G.; Iampietro, Pat J.

2006-01-01

A multibeam bathymetric survey that produced unprecedented high resolution images of the mouth of San Francisco Bay was conducted in 2004 and 2005. The survey, performed over forty-four days by the Seafloor Mapping Lab at California State University, Monterey Bay, consisted of 1,138 track lines, 1.1 billion soundings, and covered an area of 154 km2 (60 mi2). The goals of this survey were to analyze sediment transport pathways at the mouth of San Francisco Bay and to calculate bathymetric change since the last survey was completed in 1956. The survey showed that significant bathymetric changes have occurred over the past 50 years. It also revealed that the study area contains sand waves that are among the largest and bedform morphologies that are among the most varied in the world. This set of five sheets shows views of the sand waves on the seafloor from different perspectives along with descriptive text.

Seafloor heterogeneity influences the biodiversity–ecosystem functioning relationships in the deep sea

PubMed Central

Zeppilli, Daniela; Pusceddu, Antonio; Trincardi, Fabio; Danovaro, Roberto

2016-01-01

Theoretical ecology predicts that heterogeneous habitats allow more species to co-exist in a given area. In the deep sea, biodiversity is positively linked with ecosystem functioning, suggesting that deep-seabed heterogeneity could influence ecosystem functions and the relationships between biodiversity and ecosystem functioning (BEF). To shed light on the BEF relationships in a heterogeneous deep seabed, we investigated variations in meiofaunal biodiversity, biomass and ecosystem efficiency within and among different seabed morphologies (e.g., furrows, erosional troughs, sediment waves and other depositional structures, landslide scars and deposits) in a narrow geo-morphologically articulated sector of the Adriatic Sea. We show that distinct seafloor morphologies are characterized by highly diverse nematode assemblages, whereas areas sharing similar seabed morphologies host similar nematode assemblages. BEF relationships are consistently positive across the entire region, but different seabed morphologies are characterised by different slope coefficients of the relationship. Our results suggest that seafloor heterogeneity, allowing diversified assemblages across different habitats, increases diversity and influence ecosystem processes at the regional scale, and BEF relationships at smaller spatial scales. We conclude that high-resolution seabed mapping and a detailed analysis of the species distribution at the habitat scale are crucial for improving management of goods and services delivered by deep-sea ecosystems. PMID:27211908

Mapping of Coral Reef Environment in the Arabian Gulf Using Multispectral Remote Sensing

NASA Astrophysics Data System (ADS)

Ben-Romdhane, H.; Marpu, P. R.; Ghedira, H.; Ouarda, T. B. M. J.

2016-06-01

Coral reefs of the Arabian Gulf are subject to several pressures, thus requiring conservation actions. Well-designed conservation plans involve efficient mapping and monitoring systems. Satellite remote sensing is a cost-effective tool for seafloor mapping at large scales. Multispectral remote sensing of coastal habitats, like those of the Arabian Gulf, presents a special challenge due to their complexity and heterogeneity. The present study evaluates the potential of multispectral sensor DubaiSat-2 in mapping benthic communities of United Arab Emirates. We propose to use a spectral-spatial method that includes multilevel segmentation, nonlinear feature analysis and ensemble learning methods. Support Vector Machine (SVM) is used for comparison of classification performances. Comparative data were derived from the habitat maps published by the Environment Agency-Abu Dhabi. The spectral-spatial method produced 96.41% mapping accuracy. SVM classification is assessed to be 94.17% accurate. The adaptation of these methods can help achieving well-designed coastal management plans in the region.

An acoustic backscatter thermometer for remotely mapping seafloor water temperature

NASA Astrophysics Data System (ADS)

Jackson, Darrell R.; Dworski, J. George

1992-01-01

A bottom-mounted, circularly scanning sonar operating at 40 kHz has been used to map changes in water sound speed over a circular region 150 m in diameter. If it is assumed that the salinity remains constant, the change in sound speed can be converted to a change in temperature. For the present system, the spatial resolution is 7.5 m and the temperature resolution is 0.05°C. The technique is based on comparison of successive sonar scans by means of a correlation algorithm. The algorithm is illustrated using data from the Sediment Transport Events on Slopes and Shelves (STRESS) experiment.

Deformation offshore Northern Chile monitored by a seafloor geodetic network (GeoSEA)

NASA Astrophysics Data System (ADS)

Hannemann, Katrin; Lange, Dietrich; Kopp, Heidrun; Petersen, Florian; Contreras-Reyes, Eduardo

2017-04-01

The Nazca-South American plate boundary around 21°S has last ruptured in an earthquake in 1877 and was identified as a seismic gap prior to the 2014 Iquique earthquake (Mw=8.1). The southern portion of this segment is still unbroken. The geodetic monitoring of the Chilean subduction zone is crucial to understand the deformation processes in this area. Most geodetic measurements rely on GPS and are therefore limited to onshore campaigns. In December 2015, we installed the GeoSEA (Geodetic Earthquake Observatory on the SEAfloor) array around 21°S of the Nazca-South American plate boundary with RV SONNE to extend the geodetic observations to the offshore areas. The GeoSEA array consists of autonomous acoustic seafloor transponders mounted on 4 m high tripods. These transponders are able to continuously measure the two-way travel time of acoustic signals between station pairs (baselines) and the properties of the sea water (sound speed, temperature and pressure) at each transponder. These measurements are used to retrieve the distances between the transponders and give insights into the deformation of the seafloor. At the Chilean subduction zone, we installed in total 23 transponders in 3 subarrays with interstation distances of up to 2500 m. On the middle continental slope in 2300 m water depth, an array consisting of 8 transponders measures across crustal faults seen in AUV mapping. A second array of 5 stations located on the outer rise monitors extension across normal plate-bending faults. The deepest deployment in 5000 m water depth located on the lower continental slope with 10 stations is designed to measure diffuse strain build-up. The transponders are intended to monitor the seafloor deformation for 3.5 years. In November 2016 during a cruise of RV Langseth, the first 11 months of data were successfully uploaded via an acoustic modem. Furthermore, an additional component of the network, GeoSURF, a self-steering autonomous vehicle (wave glider), was successfully used to monitor system health and to upload parts of the data from the seafloor stations. The first 11 months of data show a good signal quality and the baseline precision is ± 5 mm. The data reveals no deformation above the resolution limits of the individual distance measurements.

Three-dimensional shear wave velocity structure in the Atlantic upper mantle

NASA Astrophysics Data System (ADS)

James, Esther Kezia Candace

Oceanic lithosphere constitutes the upper boundary layer of the Earth's convecting mantle. Its structure and evolution provide a vital window on the dynamics of the mantle and important clues to how the motions of Earth's surface plates are coupled to convection in the mantle below. The three-dimensional shear-velocity structure of the upper mantle beneath the Atlantic Ocean is investigated to gain insight into processes that drive formation of oceanic lithosphere. Travel times are measured for approximately 10,000 fundamental-mode Rayleigh waves, in the period range 30-130 seconds, traversing the Atlantic basin. Paths with >30% of their length through continental upper mantle are excluded to maximize sensitivity to the oceanic upper mantle. The lateral distribution of Rayleigh wave phase velocity in the Atlantic upper mantle is explored with two approaches. One, phase velocity is allowed to vary only as a function of seafloor age. Two, a general two-dimensional parameterization is utilized in order to capture perturbations to age-dependent structure. Phase velocity shows a strong dependence on seafloor age, and removing age-dependent velocity from the 2-D maps highlights areas of anomalously low velocity, almost all of which are proximal to locations of hotspot volcanism. Depth-dependent variations in vertically-polarized shear velocity (Vsv) are determined with two sets of 3-D models: a layered model that requires constant VSV in each depth layer, and a splined model that allows VSV to vary continuously with depth. At shallow depths (˜75 km) the seismic structure shows the expected dependence on seafloor age. At greater depths (˜200 km) high-velocity lithosphere is found only beneath the oldest seafloor; velocity variations beneath younger seafloor may result from temperature or compositional variations within the asthenosphere. The age-dependent phase velocities are used to constrain temperature in the mantle and show that, in contrast to previous results for the Pacific, phase velocities for the Atlantic are not consistent with a half-space cooling model but are best explained by a plate-cooling model with thickness of 75 km and mantle temperature of 1400°C. Comparison with data such as basalt chemistry and seafloor elevation helps to separate thermal and compositional effects on shear velocity.

Marine habitat mapping, classification and monitoring in the coastal North Sea: Scientific vs. stakeholder interests

NASA Astrophysics Data System (ADS)

Hass, H. Christian; Mielck, Finn; Papenmeier, Svenja; Fiorentino, Dario

2016-04-01

Producing detailed maps of the seafloor that include both, water depth and simple textural characteristics has always been a challenge to scientists. In this context, marine habitat maps are an essential tool to comprehend the complexity, the spatial distribution and the ecological status of different seafloor types. The increasing need for more detail demands additional information on the texture of the sediment, bedforms and information on benthic sessile life. For long time, taking samples and videos/photographs followed by interpolation over larger distances was the only feasible way to gain information about sedimentary features such as grain-size distribution and bedforms. While ground truthing is still necessary, swath systems such as multibeam echo sounders (MBES) and sidescan sonars (SSS), as well as single beam acoustic ground discrimination systems (AGDS) became available to map the seafloor area-wide (MBES, SSS), fast and in great detail. Where area-wide measurements are impossible or unavailable point measurements are interpolated, classified and modeled. To keep pace with environmental change in the highly dynamic coastal areas of the North Sea (here: German Bight) monitoring that utilizes all of the mentioned techniques is a necessity. Since monitoring of larger areas is quite expensive, concepts for monitoring strategies were developed in scientific projects such as "WIMO" ("Scientific monitoring concepts for the German Bight, SE North Sea"). While instrumentation becomes better and better and interdisciplinary methods are being developed, the gap between basic scientific interests and stakeholder needs often seem to move in opposite directions. There are two main tendencies: the need to better understand nature systems (for theoretical purposes) and the one to simplify nature (for applied purposes). Science trends to resolve the most detail in highest precision employing soft gradients and/or fuzzy borders instead of crisp demarcations and classifications of habitats wherever this is suitable. At the same time e.g. the European authorities put much effort into the standardization of habitat classifications (e.g. EUNIS) which is essentially a massive reduction of the information content. While standardization is a necessary and important task aiming at aiding e.g. the public authorities in protecting and managing marine habitats, much information is lost on the way without actually knowing its role in explaining the natural system. In this study we show examples from various coastal areas of the North Sea concerning raw data, processed data, interpolated, modeled and classified data. We compare classifications and evaluate the information contents as well as the entropy change across the data processing stages.

Global equivalent magnetization of the oceanic lithosphere

NASA Astrophysics Data System (ADS)

Dyment, J.; Choi, Y.; Hamoudi, M.; Lesur, V.; Thebault, E.

2015-11-01

As a by-product of the construction of a new World Digital Magnetic Anomaly Map over oceanic areas, we use an original approach based on the global forward modeling of seafloor spreading magnetic anomalies and their comparison to the available marine magnetic data to derive the first map of the equivalent magnetization over the World's ocean. This map reveals consistent patterns related to the age of the oceanic lithosphere, the spreading rate at which it was formed, and the presence of mantle thermal anomalies which affects seafloor spreading and the resulting lithosphere. As for the age, the equivalent magnetization decreases significantly during the first 10-15 Myr after its formation, probably due to the alteration of crustal magnetic minerals under pervasive hydrothermal alteration, then increases regularly between 20 and 70 Ma, reflecting variations in the field strength or source effects such as the acquisition of a secondary magnetization. As for the spreading rate, the equivalent magnetization is twice as strong in areas formed at fast rate than in those formed at slow rate, with a threshold at ∼40 km/Myr, in agreement with an independent global analysis of the amplitude of Anomaly 25. This result, combined with those from the study of the anomalous skewness of marine magnetic anomalies, allows building a unified model for the magnetic structure of normal oceanic lithosphere as a function of spreading rate. Finally, specific areas affected by thermal mantle anomalies at the time of their formation exhibit peculiar equivalent magnetization signatures, such as the cold Australian-Antarctic Discordance, marked by a lower magnetization, and several hotspots, marked by a high magnetization.

The geology of Six Mile Reef, eastern Long Island Sound

USGS Publications Warehouse

Poppe, L.J.; Denny, J.F.; Williams, S.J.; Moser, M.S.; Forfinski, N.A.; Stewart, H.F.; Doran, E.F.

2007-01-01

Digital terrain models, which can be produced from multibeam bathymetric data, are ordered arrays of depths for a number of sea-floor positions sampled at regularly spaced intervals. These models provide valuable base maps for marine geological interpretations that help define the variability of the sea floor (one of the primary controls of benthic habitat diversity), improve our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats, and provide a detailed framework to guide and assist future research, monitoring, and management activities. The bathymetry interpreted herein was processed from data collected by National Oceanic and Atmospheric Administration vessels during hydrographic surveys H11361 and H11252. These surveys mapped roughly 156 km² of sea floor in the vicinity of Six Mile Reef, an area of eastern Long Island Sound where the sea floor is characterized by fields of large sand waves and an east-west decreasing gradient of bottom tidal-current speeds (fig. 1). Interpretations of the bathymetry are supplemented by concurrently collected seismic reflection data, as well as archived historic seismic profiles, sediment samples and bottom photography collected as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (fig. 2). The purpose of this digital report is 1) to provide the acoustic data layers produced during the above mentioned surveys, 2) to use them to describe the sea-floor character and bedform morphologies near Six Mile Reef, and 3) to relate these descriptions to ongoing processes and sedimentary environments.

Use of Seafloor Electromagnetic and Acoustic Backscatter Data for Seafloor Classification: An Example From Martha's Vineyard, Massachusetts.

NASA Astrophysics Data System (ADS)

Evans, R. L.; Kraft, B.; Mayer, L.

2006-12-01

Near surface offshore geophysical data allow sediment classification in coastal settings at high levels of spatial detail. We present data from offshore Martha's Vineyard, Massachusetts collected as part of the Office of Naval Researchś Mine Burial Prediction program. Seafloor electromagnetic data provide estimates of near surface porosity at approximately 10m intervals along each tow-line. In addition, the area has undergone repeat surveys with high resolution acoustic backscatter and bathymetry. In some locations, the geophysical data has been groundtruthed by grab sampling and coring. We examine the spatial variability in near surface sediment properties on the basis of the geophysical data. The EM data are particularly well suited to constructing semi-variograms to display length scales of variability. Preliminary examination does not show any obvious correlation between the EM data and acoustic backscatter, however, further processing of the backscatter is being carried out and so this result is tentative.

Project Report: Undergraduate Student Research Program (USRP)

NASA Technical Reports Server (NTRS)

Gavin, Patricia

2011-01-01

To better understand geochemical processes occurring on Europa's seafloor, we investigated the effects of varying Fe?content in the seafloor rock and varying temperature. Iron is important in such geochemical processes as the production of methane through serpentinization (e.g. Allen and Seyfried, 2003) and can be a nutrient for microbes (Russell and Hall, 2006; Park and Kim, 2001). It can also offer clues as to the state of differentiation of Europa's core/mantle. If Europa is fully differentiated and contains an iron core, we would expect there to be little iron in the mantle and ocean floor whereas a homogeneous Europa would have iron evenly dispersed throughout the ocean floor. Furthermore, the composition of the ocean is a result of water?rock interactions at the seafloor. This project investigated the effects of temperature on geochemical processes, comparing high temperature (> 250oC) hydrothermal vents (Kelley et al., 2001) to lower temperature (20oC) cold seeps (e.g. Orphan et al., 2002).

Scientific Literature Review on the Topic of Monitoring and Modeling Seabed Evolution Rates

DTIC Science & Technology

2014-11-01

measurement techniques Benthic sea-floor characterisation Coastal Mapping/LIDAR Biomass /benthic habitat Climatology XBeach Policy 1.2.2...http://ed.gdr.nrcan.gc.ca/index_e.php On online data base of “Measurements of biomass and productivity of seabed macrobenthic and megabenthic...unknown origin. At one site, long wavelength ripples are present in what is presumed to be sediment composed of broken shells , tidal velocities exceed

Seismic structure of the crust and uppermost mantle of South America and surrounding oceanic basins

USGS Publications Warehouse

Chulick, Gary S.; Detweiler, Shane; Mooney, Walter D.

2013-01-01

We present a new set of contour maps of the seismic structure of South America and the surrounding ocean basins. These maps include new data, helping to constrain crustal thickness, whole-crustal average P-wave and S-wave velocity, and the seismic velocity of the uppermost mantle (Pn and Sn). We find that: (1) The weighted average thickness of the crust under South America is 38.17 km (standard deviation, s.d. ±8.7 km), which is ∼1 km thinner than the global average of 39.2 km (s.d. ±8.5 km) for continental crust. (2) Histograms of whole-crustal P-wave velocities for the South American crust are bi-modal, with the lower peak occurring for crust that appears to be missing a high-velocity (6.9–7.3 km/s) lower crustal layer. (3) The average P-wave velocity of the crystalline crust (Pcc) is 6.47 km/s (s.d. ±0.25 km/s). This is essentially identical to the global average of 6.45 km/s. (4) The average Pn velocity beneath South America is 8.00 km/s (s.d. ±0.23 km/s), slightly lower than the global average of 8.07 km/s. (5) A region across northern Chile and northeast Argentina has anomalously low P- and S-wave velocities in the crust. Geographically, this corresponds to the shallowly-subducted portion of the Nazca plate (the Pampean flat slab first described by Isacks et al., 1968), which is also a region of crustal extension. (6) The thick crust of the Brazilian craton appears to extend into Venezuela and Colombia. (7) The crust in the Amazon basin and along the western edge of the Brazilian craton may be thinned by extension. (8) The average crustal P-wave velocity under the eastern Pacific seafloor is higher than under the western Atlantic seafloor, most likely due to the thicker sediment layer on the older Atlantic seafloor.

Hydroacoustic habitat mapping in Potter Cove (King George Island, Antarctica)

NASA Astrophysics Data System (ADS)

Hass, H. Christian; Wölfl, Anne-Cathrin; Kuhn, Gerhard; Jerosch, Kerstin; Scharf, Frauke; Abele, Doris

2016-04-01

Climate change increasingly affects the coastal areas off Antarctica. Strongest environmental response occurs in the transition zones that mediate between the polar and subpolar latitudes. Potter Cove, a minor fjord at the northern tip of the Antarctic Peninsula is significantly affected by rising temperatures and retreating ice sheets. Large amounts of turbid meltwaters affect both, the seafloor and the water column and cause stress for many biota. There is an increasing demand to monitor the ongoing change and to work out means for comparison with similar coastal ecosystems under pressure. Marine habitat maps provide information on the seafloor characteristics that allow to describe and evaluate the status of the recent coastal ecosystem and to predict its future development. We used a RoxAnn acoustic ground discrimination system, a sidescan sonar, grab samples (grain size and TOC) and underwater video footage to gain habitat information. Supervised and unsupervised classification routines (including fuzzy k-means clustering and LDA) were employed to calculate models ranging from two classes (soft bottom habitat, stone habitat) to 7 classes (including classes of rocks with and without macroalgae as well as classes of gravels, sands and silts). Including organic carbon in the database allowed to identify a carbon-depleted class proximal to the glacier front. Potter Cove reveals features that are related to the climate-controlled environmental change: very rough seafloor topography in a small basin close to the fjord head which was cleared by the retreating tidewater glacier through the past two decades. The increasing distance to the glacier down-fjord causes existing habitats to smooth and mature and new habitats to form. This process will change the terrestrial and marine face of Potter Cove until the ongoing climatic change stops or even reverses. It becomes apparent that the final interpretation of the results benefits significantly from the different discrimination and classification approaches.

The high resolution mapping of the Venice Lagoon tidal network

NASA Astrophysics Data System (ADS)

Madricardo, Fantina; Foglini, Federica; Kruss, Aleksandra; Bellafiore, Debora; Trincardi, Fabio

2017-04-01

One of the biggest challenges of the direct observation of the ocean is to achieve a high resolution mapping of its seafloor morphology and benthic habitats. So far, sonars have mapped just 0.05% of the ocean floor with less than ten-meter resolution. The recent efforts of the scientific community have been devoted towards the mapping of both Deep Ocean and very shallow coastal areas. Coastal and transitional environments in particular undergo strong morphological changes due to natural and anthropogenic pressure. Nowadays, only about 5% of the seafloor of these environments † have been mapped: the shallowness of these environments has prevented the use of underwater acoustics to reveal their morphological features. The recent technological development of multibeam echosounder systems, however, enables these instruments to achieve very high performances also in such shallow environments. In this work, we present results and case studies of an extensive multibeam survey carried out in the Lagoon of Venice in 2013. The Lagoon of Venice is the biggest lagoon in the Mediterranean Sea with a surface of about 550 km2 and with an average depth of about 1 m. In the last century, the morphological and ecological properties of the lagoon changed dramatically: the surface of the salt marshes was reduced by 60% and some parts of the lagoon are deepening with a net sediment flux exiting from the inlets. Moreover, major engineering interventions are currently ongoing at the inlets (MOSE project). These changes at the inlets could affect substantially the lagoon environment. To understand and monitor the future evolution of the Lagoon of Venice, ISMAR within the project RITMARE (a National Research Programme funded by the Italian Ministry of University and Research) carried out an extensive survey, involving a team of more than 25 scientists, to collect high resolution (0.5 m) bathymetry of key study areas such as the tidal inlets and channels. Following a broad multidisciplinary approach, bathymetric and backscatter intensity data are now employed for geomorphologic studies, habitat mapping and modelling of evolution trends of this highly dynamical and complex transitional environment.

Swath Bathymetry Surveys of the Monterey Bay Area from Point Ano Nuevo to Moss Landing, San Mateo, Santa Cruz, and Monterey Counties, California

USGS Publications Warehouse

Ritchie, Andrew C.; Finlayson, David P.; Logan, Joshua B.

2010-01-01

This report describes swath bathymetry and backscatter data acquired by the U.S. Geological Survey on the continental shelf within the Monterey Bay National Marine Sanctuary between Point A?o Nuevo and Moss Landing, in San Mateo, Santa Cruz, and Monterey Counties, Calif. The survey was done for the California Seafloor Mapping Program (CSMP), in field activities S-7-09-MB and S-10-09-MB, by the Western Coastal and Marine Geology (WCMG) Team of the U.S. Geological Survey (USGS). The data were aquired in two seperate surveys: (1) between August 13, 2009 and September 3, 2009, personnel from WCMG completed field activity S-7-09-MB, from Point A?o Nuevo south to Table Rock, as well as a block west of Soquel Canyon; (2) between October 12 and December 16, 2009, WCMG conducted field activity S-10-09-MB, surveying between Table Rock and Moss Landing.

High resolution shallow imaging of the mega-splay fault in the central Nankai Trough off Kumano

NASA Astrophysics Data System (ADS)

Ashi, J.

2012-12-01

Steep slopes are continuously developed at water depths between 2200 to 2800 m at the Nankai accretionary prism off Kumano. These slopes are interpreted to be surface expressions caused by the megasplay fault on seismic reflection profiles. The fault plane has been drilled at multiple depths below seafloor by IODP NanTroSEIZE project. Mud breccias only recognized at the hanging wall of the fault (Site C0004) by Xray CT scanner are interpreted be formed by strong ground shaking and the age of the shallowest event of mud breccia layers suggests deformation in 1944 Tonankai earthquake (Sakaguchi et al., 2011). Detailed structures around the fault have been examined by seismic reflection profiles including 3D experiments. Although the fault plane deeper than 100 m is well imaged, the structure shallower than 100 m is characterized by obscure sediment veneer suggesting no recent fault activity. Investigation of shallow deformation structures is significant for understanding of recent tectonic activity. Therefore, we carried out deep towed subbottom profile survey by ROV NSS (Navigable Sampling System) during Hakuho-maru KH-11-9 cruise. We introduced a chirp subbottom profiling system of EdgeTech DW-106 for high resolution mapping of shallow structures. ROV NSS also has capability to take a long core with a pinpoint accuracy. The subbottom profiler crossing the megasplay fault near Site C0004 exhibits a landward dipping reflector suggesting the fault plane. The shallowest depth of the reflector is about 10 m below seafloor and the strata above it shows reflectors parallel to the seafloor without any topographic undulation. The fault must have displaced the shallow formation because intense deformation indicated by mud breccia was restricted to near fault zone. Slumping or sliding probably modified the shallow formation after the faulting. The shallow deformations near the megasplay fault were well imaged at the fault scarp 20 km southwest of Site C0004. Although the fault plane itself is not recognized, displacements of sedimentary layers are observed along the fault up to 30 meter below the seafloor. Landward dip of the fault is estimated to be 30 degrees. Displacements of strata are about 3 m near the surface and about 5 m at 7 m below the seafloor suggesting accumulation of fault displacement. The structure more than 30 m below the seafloor is obscure due to decrease of acoustic signal. Active cold seep is expected in this site by high heat flow (Yamano et al., 2012) and many trails of Calyptogena detected by seafloor observations. These results are consistent with the shallow structures reveled by our subbottom profiling survey. References Sakaguchi, A. et al., Geology 39, 919-922, 2011. Yamano, M. et al., JpGU Meeting abstract, SSS38-P23, 2012

Investigating a dynamic gas hydrate system in disequilibrium in the Danube Delta, Black Sea

NASA Astrophysics Data System (ADS)

Hillman, Jess; Bialas, Joerg; Klaucke, Ingo; Feldman, Howard; Drexler, Tina

2017-04-01

Gas hydrates are known to be extensive across the Danube Delta, as indicated by the presence of bottom simulating reflections (BSRs). The shelf break in this region is characterised by several incised submarine canyons, the largest of which is the Viteaz Canyon, and numerous slope failures. BSRs often coincide with submarine landslides, and it has been proposed that hydrates may play a role in triggering, or facilitating such events. This study focuses on a seafloor canyon (the S2 Canyon) to the north-east of the main Viteaz Canyon, where geophysical survey data and sediment cores were acquired in 2014. Active venting from the seafloor is known to be occurring at this site as multiple flares were been imaged in the water column. The location of these flares coincides with a significant slope failure adjacent to the canyon, and some can be correlated to subsurface gas chimneys, indicating a complex 'plumbing system' of gas migration pathways. This site is of particular interest as the 'present-day' BSR imaged in seismic data is not at equilibrium with the present-day seafloor conditions. Using high resolution 2D seismic data, a P-cable 3D seismic volume and ocean bottom seismometer data we investigate potential gas migration pathways and the complex gas hydrate system in the vicinity of the S2 Canyon. In addition, we use stratigraphic interpretation based on regional 2D seismic lines to constrain the relative ages of the channel levee systems. Through detailed mapping of the BSR, possible paleo-seafloor surfaces and gas migration features we are able to provide estimates of equilibrium conditions for the hydrate system, and examine the controlling factors affecting gas migration pathways and hydrate formation. The results of this study provide new insight into a geologically complex setting with a dynamic hydrate system. Characterising the hydrate system here may help to explain why it is in disequilibrium with the present day seafloor, and provide a better understanding of any potential implications for slope stability in the future as the hydrate system moves towards equilibrium.

New Approaches to the Sea-Floor Mapping: Results From the GEBCO-NF Alumni Team's Technique Developments in Preparation to the Shell Ocean Discovery XPRIZE 2017.

NASA Astrophysics Data System (ADS)

Bazhenova, E.; Zarayskaya, Y.; Wigley, R. A.; Anderson, R.; Falconer, R. K. H.; Kearns, T.; Martin, T.; Minami, H.; Roperez, J.; Rosedee, A.; Sade, H.; Seeboruth, S.; Simpson, B.; Sumiyoshi, M.; Tinmouth, N.; Zwolak, K.

2017-12-01

In preparation for the XPRIZE 2017 Round 1, a new sea-floor mapping system has been assembled based on an Unmanned Surface Vessel (USV) coupled with an Autonomous Underwater Vehicle (AUV). USV operation allows reducing logistics costs, while the AUV provides enhanced maneuverability and high accuracy of stabilization for the mapping missions. The AUV is equipped with a high-resolution interferometric synthetic aperture sonar (HISAS) and a multibeam sonar (MBES), covering a wide bathymetry swath and the nadir, respectively. Typically operating at 20 to 40 m altitude, the HISAS is capable of providing SAS imagery with 4 x 4 cm resolution and bathymetry with 40 x 40 cm resolution throughout the swath. Smaller areas of interest (50 x 50 m) can be further examined using the Spot processing technique, to produce SAS imagery with 2 x 2 cm resolution and high- resolution SAS bathymetry with 5 x 5 cm resolution. This allows multi-aspect imaging and examination of seabed geological features at different scales. Advanced data post-processing can be performed to produce 3D images of objects and explore their structure using the shadow contrast and shape. Being an interferometric system, the HISAS collects data for both imagery and bathymetry in the same swath. This improves the robustness for SAS in areas with significant relief. In the standard survey mode, the HISAS can typically collect SAS data at 2.6 km2/hr over relatively flat ground. Another limiting factor to the HISAS data coverage and quality is the vehicle stability influenced by downslope and cross currents and the resulting vehicle's speed. From experience, the best coverage occurs at a vehicle speed of around 2 m/s. At slower speeds the vehicle starts to lose steerage leading to degradation of tracking and navigation performance, which harms the focusing algorithm that creates the SAS data. For the AUV mission planning in unknown areas or in case of highly variable conditions at the study site, MBES reconnaissance data can be acquired at higher altitudes prior to running the AUV close to the seabed. Additionally, the MBES is used to collect the acoustic bottom reflectivity (backscatter) data, which allows further sea-floor characterization and potentially description of sediment types and marine bottom habitats, such as coral reefs, deep sea hydrothermal vents etc.

The history of retreat dynamics of Petermann Glacier inferred from submarine glacial landforms

NASA Astrophysics Data System (ADS)

Jakobsson, M.; Hogan, K.; Mayer, L. A.; Mix, A. C.; Jerram, K.; Mohammad, R.; Stranne, C.; Eriksson, B.

2016-12-01

Preserved submarine glacial landforms produced at the base and margin of ice sheets and outlet glaciers comprise records of past ice dynamics complementary to modern glaciological process studies. The Petermann 2015 Expedition on the Swedish icebreaker Oden systematically mapped approximately 3100 km2 of the seafloor in Petermann Fjord and the adjacent Hall Basin of Nares Strait, northwest Greenland, with an EM122 (12 kHz) multibeam and SBP120 (2-7 kHz) chirp sub-bottom profiler. Complete, overlapping mapping coverage permitted compilation of a high-quality (15x15m) digital terrain model (DTM). In addition, the seafloor at the margin of one of the smaller outlet glaciers draining into the Petermann Fjord and selected shallow areas along the coast were mapped using a small survey boat (RV Skidbladner), equipped with an EM2040 (200-300 kHz) multibeam. High-resolution (2 x 2 m) DTMs were compiled from the RV Skidbladner surveys. The seafloor morphology of Petermann Fjord and adjacent Hall Basin is dominated by a stunning glacial landform record comprising the imprints of Petermann Glacier's retreat dynamics since the Last Glacial Maximum (LGM). The entrance to Petermann Fjord consists of a prominent bathymetric sill formed by a large well-develop grounding zone wedge that undoubtedly represents a stability point during the glacier's retreat history. The deepest entrance to the fjord is 443 m and located on the southern side of this grounding zone wedge. Outside of this grounding zone wedge in Hall Basin, less well developed grounding zones appears to be present. The landform assemblage in between the grounding zones, in particular the lack of retreat ridges, may signify a leap-frog behavior of the glacier's retreat; rapid break-up and disintegration of the outlet glacier causing retreat back to the next stability point dictated by the local bedrock geology. While numerous classical glacial landforms characteristic for fast flowing ice streams are identified, the multibeam bathymetry also reveals an enigmatic, toilet bowl-shaped features whose origin is still unclear. The collected data during the Petermann 2015 Expedition will among other things provide new insights into ice shelf-ocean interactions, essential to projecting future climate impacts on Greenland and global sea level changes.

Continental shelf GIS for the Monterey Bay National Marine Sanctuary

USGS Publications Warehouse

Wong, Florence L.; Eittreim, Stephen L.

2001-01-01

A marine sanctuary is an environment where the interests of science and society meet. Sanctuary managers need access to the best scientific data available that describe the environment and environmental processes in sanctuaries. Seafloor mapping and sampling in the Monterey Bay National Marine Sanctuary have revealed new details about the geology, morphology, and active geologic processes of this region. Data from sidescan sonar, multibeam sonar bathymetry, physical samples, and instrument moorings, are consolidated with new and existing maps in a geographic information system (GIS). The GIS provides researchers and policymakers a view of the relationship among data sets to assist science studies and to help with economic and social policy-making decisions regarding this protected environment.

The NOAA/PMEL Vents Program - 1983 to 2013: A History of Deep-Sea Volcanic and Hydrothermal Exploration and Research

NASA Astrophysics Data System (ADS)

Hammond, S. R.; Baker, E. T.; Embley, R. W.

2015-12-01

Inspiration for the Vents program arose from two serendipitous events: the discovery of seafloor spreading-center hydrothermal venting on the Galápagos Rift in 1977, and NOAA's deployment of the first US civilian research multibeam bathymetric sonar on the NOAA Ship Surveyor in 1979. Multibeam mapping in the NE Pacific revealed an unprecedented and revolutionary perspective of the Gorda and Juan de Fuca spreading centers, thus stimulating a successful exploration for volcanic and hydrothermal activity at numerous locations along both. After the 1986 discovery of the first "megaplume,", quickly recognized as the water column manifestation of a deep submarine volcanic eruption, the Vents program embarked on a multi-decadal effort to discover and understand local-, regional-, and, ultimately, global-scale physical, chemical, and biological ocean environmental impacts of submarine volcanism and hydrothermal venting. The Vents program made scores of scientific discoveries, many of which owed their success to the program's equally innovative and productive technological prowess. These discoveries were documented in hundreds of peer-reviewed papers by Vents researchers and their colleagues around the world. An emblematic success was the internationally recognized, first-ever detection, location, and study of an active deep volcanic eruption in 1993. To continue the Vents mission and further enhance its effectiveness in marine science and technology innovation, the program was reorganized in 2014 into two distinct, but closely linked, programs: Earth-Oceans Interactions and Acoustics. Both are currently engaged in expeditions and projects that maintain the Vents tradition of pioneering ocean exploration and research.

From the Seafloor to the Pool: Teaching Science in Idaho Using GIS and Lessons from the Undersea

NASA Astrophysics Data System (ADS)

Dodds, J.; Glickson, D.; Robigou, V.

2006-12-01

My selection for the NSF-funded 2005 REVEL* Project provided me an opportunity to become a member of the scientific team on an international, deep-sea research cruise in the N.E. Pacific Ocean. REVEL is a professional development program for K-12 teachers ready for the challenge of bringing discovery in the classroom and inquiry into science teaching and learning through the practice of oceanographic research. I was chosen to be aboard the R/V Thompson during the VISIONS '05, an interdisciplinary research cruise that used the Jason 2 remotely-operated vehicle and the autonomous vehicle ABE to collect co-registered geological, chemical, biological, and physical observations of the seafloor. In collaboration with scientists, I analyzed and interpreted high-resolution bathymetric data and dive observations collected in the Main Endeavour hydrothermal vent field of the Juan de Fuca Ridge. I will present the results obtained during Jason 2 dive 177, which visited several sites in the field. After analyzing the bathymetric data in ArcGIS, I used the ArcMap application to overlay the well-navigated dive 177. I precisely documented 15 hours of new geological observations, fluid and biology sampling, and instrument deployments and spatially associated them with the co-registered high-resolution bathymetric and morphologic data.This research project supports my exploration of spatial conceptualization in geography and geology. Although my students in Idaho do not have access to the sea, they can utilize the skills they gain from seafloor studies to collect data in our local environment, and make their own observations and interpretations of the landscape and its geological history. In addition, this work supports the mission of researchers, who need accurately-located, co-registered data sets to best plan integrative science to better understand the interaction between geological, chemical, physical and biological processes in deep-sea, remote, volcanic environments. During the research cruise, my 9th grade students in Twin Falls followed my work at sea via the web and through a live, high-definition broadcast from the ship to land. They studied seafloor hydrothermal systems in the classroom. When I returned to school, all students were ready to build their own ROVs. The semester-long project included planning their work, crafting their own questions, doing research on deep-sea technology, confronting unpredictable challenges and collaboratively solving problems as scientists would do for the success of a seagoing expedition. Their effort culminated in a community event, the ROV competition at the local YMCA pool. Several talented and experienced 9th students shared their knowledge of the deep-sea ecological environment and expertise in deep-sea technology with 4th graders. I am now combining my GIS expertise with experience of the deep-sea to foster students' interest in GIS and its applications to regional projects such as the water quality of their region. Students this year will investigate invasive species along Rock Creek, the same study area as their water quality project. They will use GIS software to map specific plant species that will be useful to the Twin Falls County Parks Department. Students will also continue to have opportunities to design, construct, and test ROVs after school. This will allow students from other classes and grade levels to participate in this learning-by-design project. * Research and Education: Volcanoes, Exploration, and Life http://www.visions05.washington.edu/

NOAA Office of Ocean Exploration and Research'sOkeanos Explorer Program 2014 Discoveries - U.S. Atlantic Continental Margin and Gulf of Mexico

NASA Astrophysics Data System (ADS)

Lobecker, E.; McKenna, L.; Sowers, D.; Elliott, K.; Kennedy, B.

2014-12-01

NOAA ShipOkeanos Explorer, the only U.S. federal vessel dedicated to global ocean exploration, made several important discoveries in U.S. waters of the North Atlantic Ocean and Gulf of Mexico during the 2014 field season. Based on input received from a broad group ofmarine scientists and resource managers, over 100,000 square kilometers of seafloor and associated water column were systematically explored using advanced mapping sonars. 39 ROV diveswere conducted, leading to new discoveries that will further ourunderstanding of biologic, geologic, and underwater-cultural heritage secrets hidden withinthe oceans. In the Atlantic, season highlights include completion of a multi-year submarine canyons mapping effort of the continental shelf break from North Carolina to the U.S.-Canada maritime border;new information on the ephemerality of recently discovered and geographically extensive cold water seeps; and continued exploration of the New England Seamount chain; and mapping of two potential historically significant World War II wreck sites. In the Gulf of Mexico, season highlights includecompletion of a multi-year mapping effort of the West Florida Escarpment providing new insight into submarine landslides and detachment zones;the discovery of at least two asphalt volcanoes, or 'tar lilies'; range extensions of deep-sea corals; discovery of two potential new species of crinoids; identification of at least 300 potential cold water seeps; and ROV exploration of three historically significant19th century shipwrecks. In both regions, high-resolution mapping led to new insight into the geological context in which deep sea corals develop,while ROV dives provided valuable observations of deep sea coral habitats and their associated organisms, and chemosynthetic habitats. All mapping and ROV data is freely available to the public in usable data formats and maintained in national geophysical and oceanographic data archives.

Using high-resolution multibeam bathymetry to identify seafloor surface rupture along the Palos Verdes fault complex in offshore Southern California

USGS Publications Warehouse

Marlow, M. S.; Gardner, J.V.; Normark, W.R.

2000-01-01

Recently acquired high-resolution multibeam bathymetric data reveal several linear traces that are the surficial expressions of seafloor rupture of Holocene faults on the upper continental slope southeast of the Palos Verdes Peninsula. High-resolution multichannel and boomer seismic-reflection profiles show that these linear ruptures are the surficial expressions of Holocene faults with vertical to steep dips. The most prominent fault on the multibeam bathymetry is about 10 km to the west of the mapped trace of the Palos Verdes fault and extends for at least 14 km between the shelf edge and the base of the continental slope. This fault is informally called the Avalon Knoll fault for the nearby geographic feature of that name. Seismic-reflection profiles show that the Avalon Knoll fault is part of a northwest-trending complex of faults and anticlinal uplifts that are evident as scarps and bathymetric highs on the multibeam bathymetry. This fault complex may extend onshore and contribute to the missing balance of Quaternary uplift determined for the Palos Verdes Hills and not accounted for by vertical uplift along the onshore Palos Verdes fault. We investigate the extent of the newly located offshore Avalon Knoll fault and use this mapped fault length to estimate likely minimum magnitudes for events along this fault.

Seafloor mapping and benthic habitat GIS for southern California, volume III

USGS Publications Warehouse

Cochrane, Guy R.; Golden, Nadine E.; Dartnell, Pete; Schroeder, Donna M.; Finlayson, David P.

2007-01-01

From August 8-27, 2005, more than 75 km of the continental shelf (Fig. 1) in water depths of 20-70m southeast of Santa Barbara, were surveyed during the USGS cruise S-1-05-SC (http://walrus.wr.usgs.gov/infobank/s/s105sc/html/s-1-05-sc.meta.html). Both Interferometric sonar and 14 hours of both vertical and oblique georeferenced submarine digital video were collected to (1) obtain geophysical data (bathymetry and acoustic reflectance), (2) examine and record geologic characteristics of the sea floor, and (3) construct maps of seafloor geomorphology and habitat distribution. Substrate distribution is predicted using a modified version of Cochrane and Lafferty (2002) video-supervised statistical classification of sonar data that includes derivatives of bathymetry data. Specific details of the methods can be found in the meatadata of the bathymetry data file. Substrates observed are predominantly sand with some rock. Rocky substrates were restricted primarily to an east-west trending bathymetric high 2,000 m north of oil platforms. This is an updated report (version 2.0) from the earlier 2007-1271 (version 1.0) open-file report. This updated report re-releases the data files in UTM, zone 11, WGS84 coordinates. Also, the bathymetry data has been corrected for a vertical offset discovered in the earlier 2007-1271 (version 1.0) report.

Surficial geology and benthic habitat of the German Bank seabed, Scotian Shelf, Canada

USGS Publications Warehouse

Todd, Brian J.; Kostylev, Vladimir E.

2011-01-01

To provide the scientific context for management of a newly opened scallop fishing ground, surficial geology and benthic habitats were mapped on German Bank on the southern Scotian Shelf off Atlantic Canada. To provide a seamless regional dataset, multibeam sonar surveys covered 5320 sqaure kilometres of the bank in water depths of 30–250 m and provided 5 m horizontal resolution bathymetry and backscatter strength. Geoscience data included high-resolution geophysical profiles (seismic reflection and sidescan sonar) and seabed sediment samples. Geological interpretation and is overlain in places by glacial and postglacial sediment. Biological data included seafloor video transects and photographs from which 127 taxa of visible megabenthos were identified. Trawl bycatch data were obtained from government annual research surveys. Statistical analysis of revealed that bedrock is exposed at the seafloor on much of German Bankthese two datasets and a suite of oceanographic environmental variables demonstrated that significantly different fauna exist on bedrock, glacial sediment and postglacial sediment.

Learning to Characterize Submarine Lava Flow Morphology at Seamounts and Spreading Centers using High Definition Video and Photomosaics

NASA Astrophysics Data System (ADS)

Fundis, A. T.; Sautter, L. R.; Kelley, D. S.; Delaney, J. R.; Kerr-Riess, M.; Denny, A. R.; Elend, M.

2010-12-01

In August, 2010 the UW ENLIGHTEN ’10 expedition provided ~140 hours of seafloor HD video footage at Axial Seamount, the most magmatically robust submarine volcano on the Juan de Fuca Ridge. During this expedition, direct imagery from an Insite Pacific HD camera mounted on the ROV Jason 2 was used to classify broad expanses of seafloor where high power (8 kw) and high bandwidth (10 Gb/s) fiber optic cable will be laid as part of the Regional Scale Nodes (RSN) component of the NSF funded Ocean Observatories Initiative. The cable will provide power and two-way, real-time communication to an array of >20 sensors deployed at the summit of the volcano and at active sites of hydrothermal venting to investigate how active processes within the volcano and at seafloor hot springs within the caldera are connected. In addition to HD imagery, over 10,000 overlapping photographs from a down-looking still camera were merged and co-registered to create high resolution photomosaics of two areas within Axial’s caldera. Thousands of additional images were taken to characterize the seafloor along proposed cable routes, allowing optimal routes to be planned well in advance of deployment. Lowest risk areas included those free of large collapse basins, steep flow fronts and fissures. Characterizing the modes of lava distribution across the seafloor is crucial to understanding the construction history of the upper oceanic crust at mid-ocean ridges. In part, reconstruction of crustal development and eruptive histories can be inferred from surface flow morphologies, which provide insights into lava emplacement dynamics and effusion rates of past eruptions. An online resource is under development that will educate students about lava flow morphologies through the use of HD video and still photographs. The objective of the LavaFlow exercise is to map out a proposed cable route across the Axial Seamount caldera. Students are first trained in appropriate terminology and background content to learn to recognize and identify various lava flow morphologies and volcanic features. They then conduct a virtual ROV Jason 2 dive using video and still photographs, and characterize the terrain. Their observations are supplemented by the integration of high resolution (1 m scale resolution) bathymetry collected with a RESON SeaBat 7125 sonar mounted on Jason 2 during ENLIGHTEN’10. Students visualize the bathymetry in 2D and 3D using CARIS HIPS 7.0 software. COVE (Collaborative Ocean Visualization Environment) geospatial software is then used to plan and map out an optimal cable route. The LavaFlow exercise allows students to employ the same technologies used by the RSN team for designing the Axial Seamount cabled observatory infrastructure. When completed in 2014, real-time HD imagery, geophysical, chemical and biological sensors will provide data in real-time from this site to educators throughout the US and globe via the Internet.

Glacimarine sedimentation in Petermann Fjord and Nares Strait, NW Greenland

NASA Astrophysics Data System (ADS)

Hogan, Kelly; Jakobsson, Martin; Mayer, Larry; Mix, Alan; Nielsen, Tove; Kamla, Elina; Reilly, Brendan; Heirman, Katrina An; Stranne, Christian; Mohammed, Rezwan; Eriksson, Bjorn; Jerram, Kevin

2017-04-01

Here we build on preliminary results from 6500 line-km of high-resolution chirp sub-bottom profiles (2-7 kHz) acquired in Petermann Fjord and Nares Strait during the Petermann 2015 Expedition of the Swedish icebreaker Oden. We map the unlithified sediment cover in Peterman Fjord, which consists of up to 3 conformable "drape" units and calculate volumes of this assumed "post-glacial" fill. In Nares Strait we have mapped sediment volumes in local basins just beyond the sill at the Petermann Fjord-mouth: do these sediments represent material flushed out from the grounding zone of Petermann Glacier when it was grounded at the sill? In this vein, and interestingly, some of the thickest sediments that we observe are found close to a grounding-zone wedge (GZW) in Nares Strait that represents a former grounding zone of ice retreating southwards through the strait. We also map conformable units across Nares Strait and consider the similarities between these and the sediment units in the fjord. Do the strong reflections between the units represent the same climatic, oceanographic or process-shift both inside and outside the fjord? We also aim to tie our new acoustic stratigraphy to sediment-core data (lithofacies, dates) and, therefore, to comment on the age of the mapped sediment units and present ideas on the glacimarine flux of material to the Petermann-Nares system. Primary sediment delivery to the seafloor in this environment is thought to be predominantly through sedimentation from meltwater plumes but also of iceberg-rafted debris (IRD). However, sediment redeposition by slope failures on a variety of scales also occurs and has focussed sediments into discrete basins where the seafloor is rugged. This work - which aims to relate past sediment, meltwater and iceberg fluxes to changes in climate - will help us to identify how the system has responded to a past global warming event, namely the last deglaciation. This is particularly relevant in light of the recent thinning and acceleration of NW Greenland's marine-terminating outlet glaciers.

Multi-Scale Approach for Predicting Fish Species Distributions across Coral Reef Seascapes

PubMed Central

Pittman, Simon J.; Brown, Kerry A.

2011-01-01

Two of the major limitations to effective management of coral reef ecosystems are a lack of information on the spatial distribution of marine species and a paucity of data on the interacting environmental variables that drive distributional patterns. Advances in marine remote sensing, together with the novel integration of landscape ecology and advanced niche modelling techniques provide an unprecedented opportunity to reliably model and map marine species distributions across many kilometres of coral reef ecosystems. We developed a multi-scale approach using three-dimensional seafloor morphology and across-shelf location to predict spatial distributions for five common Caribbean fish species. Seascape topography was quantified from high resolution bathymetry at five spatial scales (5–300 m radii) surrounding fish survey sites. Model performance and map accuracy was assessed for two high performing machine-learning algorithms: Boosted Regression Trees (BRT) and Maximum Entropy Species Distribution Modelling (MaxEnt). The three most important predictors were geographical location across the shelf, followed by a measure of topographic complexity. Predictor contribution differed among species, yet rarely changed across spatial scales. BRT provided ‘outstanding’ model predictions (AUC = >0.9) for three of five fish species. MaxEnt provided ‘outstanding’ model predictions for two of five species, with the remaining three models considered ‘excellent’ (AUC = 0.8–0.9). In contrast, MaxEnt spatial predictions were markedly more accurate (92% map accuracy) than BRT (68% map accuracy). We demonstrate that reliable spatial predictions for a range of key fish species can be achieved by modelling the interaction between the geographical location across the shelf and the topographic heterogeneity of seafloor structure. This multi-scale, analytic approach is an important new cost-effective tool to accurately delineate essential fish habitat and support conservation prioritization in marine protected area design, zoning in marine spatial planning, and ecosystem-based fisheries management. PMID:21637787

Multi-scale approach for predicting fish species distributions across coral reef seascapes.

PubMed

Pittman, Simon J; Brown, Kerry A

2011-01-01

Two of the major limitations to effective management of coral reef ecosystems are a lack of information on the spatial distribution of marine species and a paucity of data on the interacting environmental variables that drive distributional patterns. Advances in marine remote sensing, together with the novel integration of landscape ecology and advanced niche modelling techniques provide an unprecedented opportunity to reliably model and map marine species distributions across many kilometres of coral reef ecosystems. We developed a multi-scale approach using three-dimensional seafloor morphology and across-shelf location to predict spatial distributions for five common Caribbean fish species. Seascape topography was quantified from high resolution bathymetry at five spatial scales (5-300 m radii) surrounding fish survey sites. Model performance and map accuracy was assessed for two high performing machine-learning algorithms: Boosted Regression Trees (BRT) and Maximum Entropy Species Distribution Modelling (MaxEnt). The three most important predictors were geographical location across the shelf, followed by a measure of topographic complexity. Predictor contribution differed among species, yet rarely changed across spatial scales. BRT provided 'outstanding' model predictions (AUC = >0.9) for three of five fish species. MaxEnt provided 'outstanding' model predictions for two of five species, with the remaining three models considered 'excellent' (AUC = 0.8-0.9). In contrast, MaxEnt spatial predictions were markedly more accurate (92% map accuracy) than BRT (68% map accuracy). We demonstrate that reliable spatial predictions for a range of key fish species can be achieved by modelling the interaction between the geographical location across the shelf and the topographic heterogeneity of seafloor structure. This multi-scale, analytic approach is an important new cost-effective tool to accurately delineate essential fish habitat and support conservation prioritization in marine protected area design, zoning in marine spatial planning, and ecosystem-based fisheries management.

Application of a new genetic classification and semi-automated geomorphic mapping approach in the Perth submarine canyon, Australia

NASA Astrophysics Data System (ADS)

Picard, K.; Nanson, R.; Huang, Z.; Nichol, S.; McCulloch, M.

2017-12-01

The acquisition of high resolution marine geophysical data has intensified in recent years (e.g. multibeam echo-sounding, sub-bottom profiling). This progress provides the opportunity to classify and map the seafloor in greater detail, using new methods that preserve the links between processes and morphology. Geoscience Australia has developed a new genetic classification approach, nested within the Harris et al (2014) global seafloor mapping framework. The approach divides parent units into sub-features based on established classification schemes and feature descriptors defined by Bradwell et al. (2016: http://nora.nerc.ac.uk/), the International Hydrographic Organization (https://www.iho.int) and the Coastal Marine and Ecological Classification Standard (https://www.cmecscatalog.org). Owing to the ecological significance of submarine canyon systems in particular, much recent attention has focused on defining their variation in form and process, whereby they can be classified using a range of topographic metrics, fluvial dis/connection and shelf-incising status. The Perth Canyon is incised into the continental slope and shelf of southwest Australia, covering an area of >1500 km2 and extending from 4700 m water depth to the shelf break in 170 m. The canyon sits within a Marine Protected Area, incorporating a Marine National Park and Habitat Protection Zone in recognition of its benthic and pelagic biodiversity values. However, detailed information of the spatial patterns of the seabed habitats that influence this biodiversity is lacking. Here we use 20 m resolution bathymetry and acoustic backscatter data acquired in 2015 by the Schmidt Ocean Institute plus sub-bottom datasets and sediment samples collected Geoscience Australia in 2005 to apply the new geomorphic classification system to the Perth Canyon. This presentation will show the results of the geomorphic feature mapping of the canyon and its application to better defining potential benthic habitats.

A low-cost and reliable technique to monitor the spread of an invasive seagrass in the Caribbean Sea

NASA Astrophysics Data System (ADS)

Jobsis, D.; Wyllie-Echeverria, S.

2016-02-01

In 2002 the seagrass Halophila stipulacea was observed in Grenada in the Eastern Caribbean Sea. Since then this invasive species has spread northward through the Lesser Antilles and Leeward Islands into the US Virgin Islands. There are native Halophila species as well as other seagrass species in Eastern Caribbean therefore it is essential to accurately identify H. stipulacea before an invasion event is reported. Moreover, because the consequences of H. stipulaceapresence and spread are not known in many locations, after accurate identification is made it is also important to map patch expansion as a first step in process studies designed to determine impact. We now report a low-cost (<$1000) and reliable technique to produce species specific, geo-referenced maps that can be used to track invasion spread. System components are: a GoPro video camera placed inside underwater housing, a weighted towfish and a GPS tracking device. The camera, set in the time-lapse mode, is fixed to the towfish; Afterward using a series of straight line transects, our array is towed at low speeds while synched to GPS. The accuracy of an underwater video system is based on knowing the accurate position of seagrass on the seafloor during filming (Norris et al. 1997). After sampling images and their associated GPS coordinates are imported to a spreadsheet and coded such that H. stipulaceais related to a known position on the bottom. With this system we produce accurate maps that specifically identify H. stipulacea patches, regardless of water depth, on the seafloor. During our poster presentation we will show a series of images from 2015 sampling and display mapping results. Since the 2002 sighting in Grenada, H. stipulaceae has spread northward to nineteen Eastern Caribbean Islands (Williette et al 2014). Our technique will allow those charged with protecting natural resources to track the spread of this invasion and potentially provide an early warning system for islands nations not yet invaded.

­­­­High-Resolution Mapping of Kick`em Jenny Submarine Volcano and Associated Landslides

NASA Astrophysics Data System (ADS)

Ruchala, T. L.; Carey, S.; Hart, L.; Chen, M.; Scott, C.; Tominaga, M.; Dondin, F. J. Y.; Fujii, M.

2016-02-01

To understand the physical and geological processes that drive the volcanism and control the morphology of Kick`em Jenny (KEJ) volcano, the only active submarine volcano in the in the Lesser Antilles volcanic arc, we conducted near-source, high-resolution mapping of KEJ and its subsurface using the Remotely Operated Vehicle (ROV) Hercules during cruise NA054 of the E/V Nautilus (Sept.-Oct. 2014). Shipboard bathymetric data (EM302 system) and slope analysis maps were used to decipher the detailed seafloor morphology surrounding KEJ. Multiple generations of submarine landslides and canyons were observed, suggesting the area has been hosting dynamic sediment transport systems at multiple scales over time. Some of them might have been associated by past eruptions. Clear contacts between partially lithified carbonate sediments and volcanic formations were identified from ROV videos at the middle of the landslide slope face. Detailed observations of facies on these exposures provide constraints on the time intervals between landslide events along the western slope of KEJ. ROV video imagery also identified outcrops of columnar basalts located in the middle of the landslide deposits. These are similar in appearance to those observed in the KEJ crater during previous ROV dives, indicating a possible travel distance of volcanic materials from the crater region along landslide path. High-resolution photo mosaics, bathymetry, and magnetic data acquired by ROV Hercules were used to investigate geological processes and the possible volcanic source of landslide material within the KEJ crater. Mapping in the northwestern part of the crater floor revealed distinctive regions, including (i) microbial mats, (ii) active hydrothermal vent sites; (iii) landforms curved by channelized bottom current where seafloor is outcropped; and (iv) coarse scree the distribution of which may correlate with the distance from the crater rim. Near-bottom magnetic profiles show coherent magnetic signatures with correlatable high amplitude anomalies located in the middle of the KEJ crater.

A New Global Open Source Marine Hydrocarbon Emission Site Database

NASA Astrophysics Data System (ADS)

Onyia, E., Jr.; Wood, W. T.; Barnard, A.; Dada, T.; Qazzaz, M.; Lee, T. R.; Herrera, E.; Sager, W.

2017-12-01

Hydrocarbon emission sites (e.g. seeps) discharge large volumes of fluids and gases into the oceans that are not only important for biogeochemical budgets, but also support abundant chemosynthetic communities. Documenting the locations of modern emissions is a first step towards understanding and monitoring how they affect the global state of the seafloor and oceans. Currently, no global open source (i.e. non-proprietry) detailed maps of emissions sites are available. As a solution, we have created a database that is housed within an Excel spreadsheet and use the latest versions of Earthpoint and Google Earth for position coordinate conversions and data mapping, respectively. To date, approximately 1,000 data points have been collected from referenceable sources across the globe, and we are continualy expanding the dataset. Due to the variety of spatial extents encountered, to identify each site we used two different methods: 1) point (x, y, z) locations for individual sites and; 2) delineation of areas where sites are clustered. Certain well-known areas, such as the Gulf of Mexico and the Mediterranean Sea, have a greater abundance of information; whereas significantly less information is available in other regions due to the absence of emission sites, lack of data, or because the existing data is proprietary. Although the geographical extent of the data is currently restricted to regions where the most data is publicly available, as the database matures, we expect to have more complete coverage of the world's oceans. This database is an information resource that consolidates and organizes the existing literature on hydrocarbons released into the marine environment, thereby providing a comprehensive reference for future work. We expect that the availability of seafloor hydrocarbon emission maps will benefit scientific understanding of hydrocarbon rich areas as well as potentially aiding hydrocarbon exploration and environmental impact assessements.

A miniature research vessel: A small-scale ocean-exploration demonstration of geophysical methods

NASA Astrophysics Data System (ADS)

Howell, S. M.; Boston, B.; Sleeper, J. D.; Cameron, M. E.; Togia, H.; Anderson, A.; Sigurdardottir, T. D.; Tree, J. P.

2015-12-01

Graduate student members of the University of Hawaii Geophysical Society have designed a small-scale model research vessel (R/V) that uses sonar to create 3D maps of a model seafloor in real-time. A pilot project was presented to the public at the School of Ocean and Earth Science and Technology's (SOEST) Biennial Open House weekend in 2013 and, with financial support from the Society of Exploration Geophysicists and National Science Foundation, was developed into a full exhibit for the same event in 2015. Nearly 8,000 people attended the two-day event, including children and teachers from Hawaii's schools, home school students, community groups, families, and science enthusiasts. Our exhibit demonstrates real-time sonar mapping of a cardboard volcano using a toy size research vessel on a programmable 2-dimensional model ship track suspended above a model seafloor. Ship waypoints were wirelessly sent from a Windows Surface tablet to a large-touchscreen PC that controlled the exhibit. Sound wave travel times were recorded using an ultrasonic emitter/receiver attached to an Arduino microcontroller platform and streamed through a USB connection to the control PC running MatLab, where a 3D model was updated as the ship collected data. Our exhibit demonstrates the practical use of complicated concepts, like wave physics, survey design, and data processing in a way that the youngest elementary students are able to understand. It provides an accessible avenue to learn about sonar mapping, and could easily be adapted to talk about bat and marine mammal echolocation by replacing the model ship and volcano. The exhibit received an overwhelmingly positive response from attendees and incited discussions that covered a broad range of earth science topics.

Deformation associated to exhumation of serpentinized mantle rocks in a fossil Ocean Continent Transition: The Totalp unit in SE Switzerland

NASA Astrophysics Data System (ADS)

Picazo, S.; Manatschal, G.; Cannat, M.; Andréani, M.

2013-08-01

Although the exhumation of ultramafic rocks in slow and ultraslow spreading Mid-Ocean Ridges and Ocean Continent Transitions (OCTs) has been extensively investigated, the deformation processes related to mantle exhumation are poorly constrained. In this paper we present a new geological map and a section across the exhumed serpentinized peridotites of the Totalp unit near Davos (SE Switzerland), and we propose that the Totalp unit is formed by two Alpine thrust sheets. Geological mapping indicates local exposure of a paleo-seafloor that is formed by an exhumed detachment surface and serpentinized peridotites. The top of the exhumed mantle rocks is made of ophicalcites that resulted from the carbonation of serpentine under static conditions at the seafloor. The ophicalcites preserve depositional contacts with Upper Jurassic to Lower Cretaceous pelagic sediments (Bernoulli and Weissert, 1985). These sequences did not exceed prehnite-pumpellyite metamorphic facies conditions, and locally escaped Alpine deformation. Thin mylonitic shear zones as well as foliated amphibole-bearing ultramafic rocks have been mapped. The age of these rocks and the link with the final exhumation history are yet unknown but since amphibole-bearing ultramafic rocks can be found as clasts in cataclasites related to the detachment fault, they pre-date detachment faulting. Our petrostructural study of the exhumed serpentinized rocks also reveals a deformation gradient from cataclasis to gouge formation within 150 m in the footwall of the proposed paleo-detachment fault. This deformation postdates serpentinization. It involves a component of plastic deformation of serpentine in the most highly strained intervals that has suffered pronounced grain-size reduction and a polyphase cataclastic overprint.

Seafloor Eruptions Offer a Teachable Moment to Help SEAS Students Understand Important Geological and Ecological Processes

NASA Astrophysics Data System (ADS)

Goehring, L.; Williams, C. S.

2006-12-01

In education parlance, a teachable moment is an opportunity that arises when students are engaged and primed to learn, typically in response to some memorable event. Earthquakes, volcanic eruptions, even natural disasters, if meaningful to the student, often serve to catalyze intense learning. Recent eruptions at the East Pacific Rise offer a potential teachable moment for students and teachers involved with SEAS, a Ridge 2000 education outreach program. SEAS uses a combination of web-facilitated and teacher-directed activities to make the remote deep-sea environment and the process of science relevant and meaningful. SEAS is a web-based, inquiry-oriented education program for middle and high school students. It features the science associated with Ridge 2000 research. Since 2003, SEAS has focused on the integrated study site at the East Pacific Rise (EPR) to help students understand geological and ecological processes at mid-ocean ridges and hydrothermal vents. SEAS students study EPR bathymetry maps, images of lava formations, photomosaics of diffuse flow communities, succession in the Bio-Geo Transect, as well as current research conducted during spring cruises. In the Classroom to Sea Lab, students make direct comparisons between shallow-water mussels and vent mussels (from the EPR) to understand differences in feeding strategies. The recent eruptions and loss of seafloor fauna at this site offer the Ridge 2000 program the opportunity to help students better understand the ephemeral and episodic nature of ridge environments, as well as the realities and processes of science (particularly field science). In January 2007, the SEAS program will again sail with a Ridge 2000 research team, and will work with scientists to report findings through the SEAS website. The eruptions at the EPR covered much of the study site, and scientists' instruments and experiments, in fresh lava. We intend to highlight the recency and effect of the eruptions, using the students' anticipated response as a motivator to deepen their understanding of the environment. SEAS depends on the contributions of many scientists within the Ridge 2000 community, and serves as an outreach channel for the whole community. Scientists can help field student questions during the Ask-a- Scientist email forum, serve as Report Reviewers, be featured in Scientist Spotlights, and help develop new Classroom to Sea labs and curricular materials. In the next four years, SEAS will integrate with the international GLOBE education program (www.globe.gov), and help our community reach even more students and teachers, worldwide.

Integration of seafloor point data in usSEABED

USGS Publications Warehouse

Reid, Jane A.; Williams, S. Jeffress; Zimmermann, Mark; Jenkins, Chris; Golden, Nadine E.

2007-01-01

Sediments of the beach, nearshore, and continental shelves record a complex interplay of processes including wave energy and direction , currents, beach erosion or accretion, bluff or cliff retreat, fluvial input, sediment longshore and cross-shelf transport processes, contaminant content and transport, sediment sources and sinks, and others. In turn, sediments and rocks modify wave patterns, affect recreation and tourism, and provide habitat for fish, epifauna, and infauna. Character of the surficial seafloor also influences navigation, commercial and recreational fishing and gathering of other food sources, communication, piplines, national defense, and provides geologic resources including sand and gravel aggregates, minerals, and real or potential energy sources. The beaches, nearshore, and continental margins fall under overlapping levels of managerial responsibility between Federal, State, regional, and local government agencies and consortia. In addition, universities and other academic institutions investigate these places for pure or applied scientific reasons. Mapping is usually the first step in understanding any issue and is often comprised of remotely gathered geophysical data such as bathymetry and backscatter imagery, and groundtruthing; that is, the collection of physical and virtual samples to tie the remotely gathered data to reality. The physical samples are described and (or) carefully analyzed for grain-size information -- which records both the site's physical conditions and geologic past -- and commonly, for constituent components such as mineral and rock types (to determine onland sources and in situ chemical processes), carbonate and organic content and microfossils (for biological and oceanographic influences), and structure such as layering and bioturbation (for physical influences). The samples may also be subjected to physical tests such as comp[action analyses, liquefaction or plasticity limits, ans other parameters important when considering construction of offshore structures. In recent years, virtual sampling of the seafloor has become popular, through the use of towed video or photographic equipment and the addition of camera to oceanographic equipment such as corers and tripods. Before about ten years ago, most maps were made by hand. Recently, with the advent of desktop GIS packages, map making and resource analysis can be done nearly "on-the-fly" if geographically located data exist. While the problems of projection, scale, and resolution of digitized paper maps are commonly known amongst GIS-users, access to the original underlying point data allows for maps to be regenerated for digital use using statistically proven methods, provides increasing data density by including multiple studies, as well as allows the point data to be used in other ways than just mapping. These point data may be available in raw or refined or in worded descriptions. Raw data such as granulometric analyses can be manipulated through the use of known equations or empirical relationships to provide information about other parameters of the sediment, such as mean grainsize, sorting, erodability, or rugosity. If refined data are presented such as gravel, sand, and mud percentages, the parameter noted earlier may be estimated. In the case of worded descriptions, values for geologic terms can be assigned, for example, "fine sand" equate to 0.2 mm sized particles, to provide numeric terms for GIS or modeling purposes.

Acoustic communications for cabled seafloor observatories

NASA Astrophysics Data System (ADS)

Freitag, L.; Stojanovic, M.

2003-04-01

Cabled seafloor observatories will provide scientists with a continuous presence in both deep and shallow water. In the deep ocean, connecting sensors to seafloor nodes for power and data transfer will require cables and a highly-capable ROV, both of which are potentially expensive. For many applications where very high bandwidth is not required, and where a sensor is already designed to operate on battery power, the use of acoustic links should be considered. Acoustic links are particularly useful for large numbers of low-bandwidth sensors scattered over tens of square kilometers. Sensors used to monitor the chemistry and biology of vent fields are one example. Another important use for acoustic communication is monitoring of AUVs performing pre-programmed or adaptive sampling missions. A high data rate acoustic link with an AUV allows the observer on shore to direct the vehicle in real-time, providing for dynamic event response. Thus both fixed and mobile sensors motivate the development of observatory infrastructure that provides power-efficient, high bandwidth acoustic communication. A proposed system design that can provide the wireless infrastructure, and further examples of its use in networks such as NEPTUNE, are presented.

Active-passive data fusion algorithms for seafloor imaging and classification from CZMIL data

NASA Astrophysics Data System (ADS)

Park, Joong Yong; Ramnath, Vinod; Feygels, Viktor; Kim, Minsu; Mathur, Abhinav; Aitken, Jennifer; Tuell, Grady

2010-04-01

CZMIL will simultaneously acquire lidar and passive spectral data. These data will be fused to produce enhanced seafloor reflectance images from each sensor, and combined at a higher level to achieve seafloor classification. In the DPS software, the lidar data will first be processed to solve for depth, attenuation, and reflectance. The depth measurements will then be used to constrain the spectral optimization of the passive spectral data, and the resulting water column estimates will be used recursively to improve the estimates of seafloor reflectance from the lidar. Finally, the resulting seafloor reflectance cube will be combined with texture metrics estimated from the seafloor topography to produce classifications of the seafloor.

DeepSurveyCam--A Deep Ocean Optical Mapping System.

PubMed

Kwasnitschka, Tom; Köser, Kevin; Sticklus, Jan; Rothenbeck, Marcel; Weiß, Tim; Wenzlaff, Emanuel; Schoening, Timm; Triebe, Lars; Steinführer, Anja; Devey, Colin; Greinert, Jens

2016-01-28

Underwater photogrammetry and in particular systematic visual surveys of the deep sea are by far less developed than similar techniques on land or in space. The main challenges are the rough conditions with extremely high pressure, the accessibility of target areas (container and ship deployment of robust sensors, then diving for hours to the ocean floor), and the limitations of localization technologies (no GPS). The absence of natural light complicates energy budget considerations for deep diving flash-equipped drones. Refraction effects influence geometric image formation considerations with respect to field of view and focus, while attenuation and scattering degrade the radiometric image quality and limit the effective visibility. As an improvement on the stated issues, we present an AUV-based optical system intended for autonomous visual mapping of large areas of the seafloor (square kilometers) in up to 6000 m water depth. We compare it to existing systems and discuss tradeoffs such as resolution vs. mapped area and show results from a recent deployment with 90,000 mapped square meters of deep ocean floor.

An open-water electrical geophysical tool for mapping sub-seafloor heavy placer minerals in 3D and migrating hydrocarbon plumes in 4D

USGS Publications Warehouse

Wynn, J.; Williamson, M.; Urquhart, S.; Fleming, J.

2011-01-01

A towed-streamer technology has been developed for mapping placer heavy minerals and dispersed hydrocarbon plumes in the open ocean. The approach uses induced polarization (IP), an electrical measurement that encompasses several different surface-reactive capacitive and electrochemical phenomena, and thus is ideally suited for mapping dispersed or disseminated targets. The application is operated at sea by towing active electrical geophysical streamers behind a ship; a wide area can be covered in three dimensions by folding tow-paths over each other in lawn-mower fashion. This technology has already been proven in laboratory and ocean settings to detect IP-reactive titanium-and rare-earth (REE) minerals such as ilmenite and monazite. By extension, minerals that weather and accumulate/concentrate by a similar mechanism, including gold, platinum, and diamonds, may be rapidly detected and mapped indirectly even when dispersed and covered with thick, inert sediment. IP is also highly reactive to metal structures such as pipelines and cables. ?? 2011 MTS.

Recent Multidisciplinary Research Initiatives and IODP Drilling in the South China Sea

NASA Astrophysics Data System (ADS)

Lin, J.; Li, C. F.; Wang, P.; Kulhanek, D. K.

2016-12-01

The South China Sea (SCS) is the largest low-latitude marginal sea in the world. Its formation and evolution are linked to the complex continental-oceanic tectonic interaction of the Eurasian, Pacific, and Indo-Australian plates. Despite its relatively small size and short history, the SCS has undergone nearly a complete Wilson cycle from continental break-up to seafloor spreading to subduction, serving as a natural laboratory for studying the linkages between tectonic, volcanic, and oceanic processes. The last several years have witnessed significant progress in investigation of the SCS through comprehensive research programs using multidisciplinary approaches and enhanced international collaboration. The International Ocean Discovery Program (IODP) Expedition 349 drilled and cored five sites in the SCS in 2014. The expedition successfully obtained the first basaltic rock samples of the SCS relict spreading center, discovered large and frequent deep-sea turbidity events, and sampled multiple seamount volcaniclastic layers. In addition, high-resolution near-seafloor magnetic surveys were conducted in the SCS with survey lines passing near some of the IODP drilling sites. Together the IODP drilling and deep-tow magnetic survey results confirmed, for the first time, that the entire SCS basin might have stopped seafloor spreading at similar ages in early Miocene, providing important constraints on marginal sea geodynamic models. In 2007, IODP Expeditions 367 and 368 will drill the northern margin of the SCS to investigate the mechanisms of rifting to spreading processes. Meanwhile, major progress in studying the SCS processes has also been made through comprehensive multidisciplinary programs, for example, the eight-year-long "South China Sea Deep" initiative, which also supports and encourages strong international collaboration. This presentation will highlight the recent multidisciplinary research initiatives in investigation of the SCS and the important role of international collaboration.

Stochastic Mapping for Chemical Plume Source Localization With Application to Autonomous Hydrothermal Vent Discovery

DTIC Science & Technology

2007-02-01

rise froom the seafloor a buoyant hydrothermal plume will have expanded laterally fromn oil the order of a few centimeters at an...diameters of rise height [20]. Detections of buoyant plume effluent are likely when the vehicle passes near the plume centerline; however, the in...the vertical extent of the plume . I will refer to this figure, W0 = 0.1 m/s, subsequently as the "canonical rise rate" for buoyant hydrothermal plumes

Seismic-reflection surveys of the Blake Ridge, R/V Cape Hatteras, 1992 and 1995; data acquisition, navigation and processing

USGS Publications Warehouse

Taylor, Michael H.; Dillon, William P.; Anton, Christopher H.; Danforth, William W.

1999-01-01

As part of an ongoing study, seismic-reflection profiles were collected over the Blake Ridge in 1992 and 1995, in order to map the volume and distribution of methane hydrate. Faulting and seafloor instabilities appear to be related to methane hydrate processes at the Blake Ridge. Seismic profiles display a prominent collapse structure at the crest, which is inferred to have resulted from the mobilization of sediment that was associated with methane hydrate dissociation.

Using Research Data to Stimulate Critical Thinking in Undergraduate Geoscience Courses: Examples and Future Directions

NASA Astrophysics Data System (ADS)

Reed, D. L.; Moore, G. F.; Bangs, N. L.; Tobin, H.

2007-12-01

The results of major research initiatives, such as NSF-MARGINS, IODP and its predecessors DSDP and ODP, Ridge 2000, and NOAA's Ocean Explorer and Vents Programs provide a rich library of resources for inquiry-based learning in undergraduate classes in the geosciences. These materials are scalable for use in general education courses for the non-science major to upper division major and graduate courses, which are both content-rich and research-based. Examples of these materials include images and animations drawn from computer presentations at research workshops and audio/video clips from web sites, as well as data repositories, which can be accessed through GeoMapApp, a data exploration and visualization tool developed as part of the Marine Geoscience Data System by researchers at the LDEO (http://www.geomapapp.org/). Past efforts have focused on recreating sea-going research experiences by integrating and repurposing these data in web-based virtual environments to stimulate active student participation in laboratory settings and at a distance over the WWW. Virtual expeditions have been created based on multibeam mapping of the seafloor near the Golden Gate, bathymetric transects of the major ocean basins, subduction zone seismicity and related tsunamis, water column mapping and submersible dives at hydrothermal vents, and ocean drilling of deep-sea sediments to explore climate change. Students also make use of multichannel seismic data provided through the Marine Seismic Data Center of UTIG to study subduction zone processes at convergent plate boundaries. We will present the initial stages of development of a web-based virtual expedition for use in undergraduate classes, based on a recent 3-D seismic survey associated with the NanTroSEIZE program of NSF-MARGINS and IODP to study the properties of the plate boundary fault system in the upper limit of the seismogenic zone off Japan.

Very High Resolution Bathymetric Mapping at the Ridge 2000 Integrated Study Sites: Acquisition and Processing Protocols Developed During Recent Alvin Field Programs to the East Pacific Rise and Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Ferrini, V.; Fornari, D. J.; Shank, T.; Tivey, M.; Kelley, D. S.; Glickson, D.; Carbotte, S. M.; Howland, J.; Whitcomb, L. L.; Yoerger, D.

2004-12-01

Recent field programs at the East Pacific Rise and Juan de Fuca Ridge have resulted in the refinement of data processing protocols that enable the rapid creation of high-resolution (meter-scale) bathymetric maps from pencil-beam altimetric sonar data that are routinely collected during DSV Alvin dives. With the development of the appropriate processing tools, the Imagenex sonar, a permanent sensor on Alvin, can be used by a broad range of scientists permitting the analysis of various data sets within the context of high-quality bathymetric maps. The data processing protocol integrates depth data recorded with Alvin's Paroscientific pressure sensor with bathymetric soundings collected with an Imagenex 675 kHz articulating (scanning) sonar system, and high-resolution navigational data acquired with DVLNAV, which includes bottom lock Doppler sonar and long baseline (LBL) navigation. Together these data allow us, for the first time, to visualize portions of Ridge 2000 Integrated Study Sites (ISS) at 1-m vertical and horizontal resolution. These maps resolve morphological details of structures within the summit trough at scales that are relevant to biological communities (e.g. hydrothermal vents, lava pillars, trough walls), thus providing the important geologic context necessary to better understand spatial patterns associated with integrated biological-hydrothermal-geological processes. The Imagenex sonar is also a permanent sensor on the Jason2 ROV, which is also equipped with an SM2000 (200 kHz) near-bottom multibeam sonar. In the future, it is envisioned that near-bottom multibeam sonars will be standard sensors on all National Deep Submergence Facility (NDSF) vehicles. Streamlining data processing protocols makes these datasets more accessible to NDSF users and ensures broad compatibility between data formats among NDSF vehicle systems and allied vehicles (e.g. ABE). Establishing data processing protocols and software suites, routinely calibrating sensors (e.g. Paroscientific depth sensors), and ensuring good navigational benchmarks between various cruises to the Ridge 2000 ISS improves the capability and quality of rapidly produced high-resolution bathymetric maps enabling users to optimize their diving programs. This is especially important within the context of augmenting high-resolution bathymetric data collection in ISS areas (several cruises to the same area over multiple years) and investigating possible changes in seafloor topography, hydrothermal vent features and/or biological communities that are related to tectonic or volcanic events.

Global assessment of benthic nepheloid layers and linkage with upper ocean dynamics

NASA Astrophysics Data System (ADS)

Gardner, Wilford D.; Richardson, Mary Jo; Mishonov, Alexey V.

2018-01-01

Global maps of the maximum bottom concentration, thickness, and integrated particle mass in benthic nepheloid layers are published here to support collaborations to understand deep ocean sediment dynamics, linkage with upper ocean dynamics, and assessing the potential for scavenging of adsorption-prone elements near the deep ocean seafloor. Mapping the intensity of benthic particle concentrations from natural oceanic processes also provides a baseline that will aid in quantifying the industrial impact of current and future deep-sea mining. Benthic nepheloid layers have been mapped using 6,392 full-depth profiles made during 64 cruises using our transmissometers mounted on CTDs in multiple national/international programs including WOCE, SAVE, JGOFS, CLIVAR-Repeat Hydrography, and GO-SHIP during the last four decades. Intense benthic nepheloid layers are found in areas where eddy kinetic energy in overlying waters, mean kinetic energy 50 m above bottom (mab), and energy dissipation in the bottom boundary layer are near the highest values in the ocean. Areas of intense benthic nepheloid layers include the Western North Atlantic, Argentine Basin in the South Atlantic, parts of the Southern Ocean and areas around South Africa. Benthic nepheloid layers are weak or absent in most of the Pacific, Indian, and Atlantic basins away from continental margins. High surface eddy kinetic energy is associated with the Kuroshio Current east of Japan. Data south of the Kuroshio show weak nepheloid layers, but no transmissometer data exist beneath the Kuroshio, a deficiency that should be remedied to increase understanding of eddy dynamics in un-sampled and under-sampled oceanic areas.

High-resolution bathymetry as a primary exploration tool for seafloor massive sulfide deposits - lessons learned from exploration on the Mid-Atlantic and Juan de Fuca Ridges, and northern Lau Basin

NASA Astrophysics Data System (ADS)

Jamieson, J. W.; Clague, D. A.; Petersen, S.; Yeo, I. A.; Escartin, J.; Kwasnitschka, T.

2016-12-01

High-resolution, autonomous underwater vehicle (AUV)-derived multibeam bathymetry is increasingly being used as an exploration tool for delineating the size and extent of hydrothermal vent fields and associated seafloor massive sulfide deposits. However, because of the limited amount of seafloor that can be surveyed during a single dive, and the challenges associated with distinguishing hydrothermal chimneys and mounds from other volcanic and tectonic features using solely bathymetric data, AUV mapping surveys have largely been employed as a secondary exploration tool once hydrothermal sites have been discovered using other exploration methods such as plume, self-potential and TV surveys, or ROV and submersible dives. Visual ground-truthing is often required to attain an acceptable level of confidence in the hydrothermal origin of features identified in AUV-derived bathymetry. Here, we present examples of high-resolution bathymetric surveys of vent fields from a variety of tectonic environments, including slow- and intermediate-rate mid-ocean ridges, oceanic core complexes and back arc basins. Results illustrate the diversity of sulfide deposit morphologies, and the challenges associated with identifying hydrothermal features in different tectonic environments. We present a developing set of criteria that can be used to distinguish hydrothermal deposits in bathymetric data, and how AUV surveys can be used either on their own or in conjunction with other exploration techniques as a primary exploration tool.

A multi-frequency investigation of the influences of groundwater discharge on hydrocarbon emission and transport in the Baltic Sea

NASA Astrophysics Data System (ADS)

Weidner, E. F.; Jakobsson, M.; Nycander, J.; Mayer, L. A.

2017-12-01

In nearshore coastal regions submarine groundwater discharge is a major component of the hydro-geological cycle: transporting nutrients and pollutants to the ocean, producing up-welling currents through buoyancy effects, and acting as an erosional force at discharge sites. In nearshore regions where biogenic gas production is high, groundwater discharge could potentially act as a control on hydrocarbon emission and transport from the seafloor though the water-column. In the southern Stockholm Archipelago of the Baltic Sea, terraces and semi-circular depressions on shallow (<20 meters) seafloor have been linked to the discharge of ground water, traveling along the permeable layers in glacial clay deposits (Söderberg and Flodén 1995; Jakobsson et al., 2016). Sub-bottom profiles over the same region have identified widespread areas of subsurface blanking, commonly attributed to gas, as well as water-column seep features, both in spatial proximity to the groundwater discharge sites. High-resolution multibeam bathymetry and chirp sub-bottom profiles were combined with water-column data sets collected at multiple frequencies (300 kHz, 45-90 kHz, 160-260 kHz) to map the spatial distribution of seeps and investigate their relationship to localized groundwater discharge as determined by seafloor and subsurface morphology. The spatial extent of seep sites appears closely tied to regions of suspected groundwater discharge, suggesting direct or indirect controls on gas emission pathways. Additionally, seep morphology in the broadband data hints at the possibility of groundwater and gas flow mixing.

3D photo mosaicing of Tagiri shallow vent field by an autonomous underwater vehicle (3rd report) - Mosaicing method based on navigation data and visual features -

NASA Astrophysics Data System (ADS)

Maki, Toshihiro; Ura, Tamaki; Singh, Hanumant; Sakamaki, Takashi

Large-area seafloor imaging will bring significant benefits to various fields such as academics, resource survey, marine development, security, and search-and-rescue. The authors have proposed a navigation method of an autonomous underwater vehicle for seafloor imaging, and verified its performance through mapping tubeworm colonies with the area of 3,000 square meters using the AUV Tri-Dog 1 at Tagiri vent field, Kagoshima bay in Japan (Maki et al., 2008, 2009). This paper proposes a post-processing method to build a natural photo mosaic from a number of pictures taken by an underwater platform. The method firstly removes lens distortion, invariances of color and lighting from each image, and then ortho-rectification is performed based on camera pose and seafloor estimated by navigation data. The image alignment is based on both navigation data and visual characteristics, implemented as an expansion of the image based method (Pizarro et al., 2003). Using the two types of information realizes an image alignment that is consistent both globally and locally, as well as making the method applicable to data sets with little visual keys. The method was evaluated using a data set obtained by the AUV Tri-Dog 1 at the vent field in Sep. 2009. A seamless, uniformly illuminated photo mosaic covering the area of around 500 square meters was created from 391 pictures, which covers unique features of the field such as bacteria mats and tubeworm colonies.

Seafloor erosional processes offshore of the Chandeleur Islands, Louisiana

USGS Publications Warehouse

Twichell, David C.; Brock, John C.

2011-01-01

The Chandeleur Islands are a chain of barrier islands that lies along the eastern side of the modern Mississippi River Delta plain. The island chain is located near the seaward edge of the relict St. Bernard Delta, the part of the Mississippi Delta that formed between approximately 4,000 and 2,000 years before present and was later abandoned as sedimentation shifted southward. After abandonment of the St. Bernard Delta, deposits were reworked, and the sandy component was shaped into the Chandeleur Islands. With continued subsidence, the islands became separated from their original delta headland sources and presently are isolated from the mainland by the shallow Chandeleur Sound. Newly acquired geophysical data and vibracores provide an opportunity to better understand the processes that are shaping seafloor morphology (i.e., shape, geometry, and structure of the seafloor) on the inner shelf adjacent to the Chandeleur Islands. The inner shelf offshore of the Chandeleur Islands was mapped in 2006 and 2007 using swath bathymetry, sidescan sonar, and high-resolution seismic-reflection techniques. The detailed results of this study were published in December 2009 (Twichell and others, 2009) as part of a special issue of Geo-Marine Letters that documents early results from the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project. This study addresses questions and concerns related to limited sand resources along the Louisiana shelf and their implications to long-term relative sea-level rise and storm impacts.

Exploring the hidden shallows: extensive reef development and resilience within the turbid nearshore Great Barrier Reef

NASA Astrophysics Data System (ADS)

Morgan, Kyle; Perry, Chris; Smithers, Scott; Johnson, Jamie; Daniell, James

2016-04-01

Mean coral cover on Australia's Great Barrier Reef (GBR) has reportedly declined by over 15% during the last 30 years. Climate change events and outbreaks of coral disease have been major drivers of degradation, often exacerbating the stresses caused by localised human activities (e.g. elevated sediment and nutrient inputs). Here, however, in the first assessment of nearshore reef occurrence and ecology across meaningful spatial scales (15.5 sq km), we show that areas of the GBR shelf have exhibited strong intra-regional variability in coral resilience to declining water quality. Specifically, within the highly-turbid "mesophotic" nearshore (<10 m depth) of the central GBR, where terrigenous seafloor sediments are persistently resuspended by wave processes, coral cover averages 38% (twice that reported on mid- and outer-shelf reefs). Of the mapped area, 11% of the seafloor has distinct reef or coral community cover, a density comparable to that measured across the entire GBR shelf (9%). Identified coral taxa (21 genera) exhibited clear depth-stratification corresponding closely to light attenuation and seafloor topography. Reefs have accreted relatively rapidly during the late-Holocene (1.8-3.0 mm y-1) with rates of vertical reef growth influenced by intrinsic shifts in coral assemblages associated with reef development. Indeed, these shallow-water reefs may have similar potential as refugia from large-scale disturbance as their deep-water (>30 m) "mesophotic" equivalents, and also provide a basis from which to model future trajectories of reef growth within nearshore areas.

Seafloor age dependence of Rayleigh wave phase velocities in the Indian Ocean

NASA Astrophysics Data System (ADS)

Godfrey, Karen E.; Dalton, Colleen A.; Ritsema, Jeroen

2017-05-01

Variations in the phase velocity of fundamental-mode Rayleigh waves across the Indian Ocean are determined using two inversion approaches. First, variations in phase velocity as a function of seafloor age are estimated using a pure-path age-dependent inversion method. Second, a two-dimensional parameterization is used to solve for phase velocity within 1.25° × 1.25° grid cells. Rayleigh wave travel time delays have been measured between periods of 38 and 200 s. The number of measurements in the study area ranges between 4139 paths at a period of 200 s and 22,272 paths at a period of 40 s. At periods < 100 s, the phase velocity variations are strongly controlled by seafloor age and shown to be consistent with temperature variations predicted by the half-space-cooling model for a mantle potential temperature of 1400°C. The inferred thermal structure beneath the Indian Ocean is most similar to the structure of the Pacific upper mantle, where phase velocities can also be explained by a half-space-cooling model. The thermal structure is not consistent with that of the Atlantic upper mantle, which is best fit by a plate-cooling model and requires a thin plate. Removing age-dependent phase velocity from the 2-D maps of the Indian Ocean highlights anomalously high velocities at the Rodriguez Triple Junction and the Australian-Antarctic Discordance and anomalously low velocities immediately to the west of the Central Indian Ridge.

Are Eastern Basin (Ross Sea, Antarctica) Bathymetric Ridges Associated With the Last Glacial Maximum?

NASA Astrophysics Data System (ADS)

Chow, J. M.; Bart, P. J.

2005-05-01

Ross Sea (Antarctica) Eastern Basin bathymetric ridges have been interpreted to be ice stream divides created during the Last Glacial Maximum (LGM) advance of the Antarctic Ice Sheet based on radiocarbon dating of organic matter from near-seafloor sediments recovered in piston cores (Domack et al., 1999). Detailed seismic correlations and contour mapping show that there are at least five thick units outcropping in Eastern Basin. Four of these seismically-defined units can be correlated to age control at DSDP sites 270 and 272. In contrast to the near-seafloor sampling, the interiors of these units were initially assigned a Pliocene age based on a variety of microfossil biozones (Hayes and Frakes, 1975). Savage and Ciesielski (1983) determined that the youngest unit was deposited during the Coscinodiscus lentiginosus (since renamed Thalassiosira lentiginosa) diatom biozone (i.e., the unit formed sometime between 0.65 Ma to Recent timeframe). Thus, seafloor units in the area probably are of Quaternary age, but not necessarily LGM age. More recently, diatom biozonations for the Southern Ocean have been revised to provide more detailed biochronostratigraphic resolution (Zielinski and Gersonde, 2002; Zielinski et al., 2002). We are using the most recently-revised Southern Ocean diatom-zonation schemes to systematically evaluate ages of samples taken from the base of piston cores penetrating the five individual seismically-defined units in Eastern Basin. Using this sampling strategy, we increase the chances of penetrating through the Recent hemipelagic drape to sample the underlying seismically-defined units.

Investigation of shallow gas hydrate occurrence and gas seep activity on the Sakhalin continental slope, Russia

NASA Astrophysics Data System (ADS)

Jin, Young Keun; Baranov, Boris; Obzhirov, Anatoly; Salomatin, Alexander; Derkachev, Alexander; Hachikubo, Akihiro; Minami, Hrotsugu; Kuk Hong, Jong

2016-04-01

The Sakhalin continental slope has been a well-known gas hydrate area since the first finding of gas hydrate in 1980's. This area belongs to the southernmost glacial sea in the northern hemisphere where most of the area sea is covered by sea ice the winter season. Very high organic carbon content in the sediment, cold sea environment, and active tectonic regime in the Sakhalin slope provide a very favorable condition for occurring shallow gas hydrate accumulation and gas emission phenomena. Research expeditions under the framework of a Korean-Russian-Japanese long-term international collaboration projects (CHAOS, SSGH-I, SSGH-II projects) have been conducted to investigate gas hydrate occurrence and gas seepage activities on the Sakhalin continental slope, Russia from 2003 to 2015. During the expeditions, near-surface gas hydrate samples at more than 30 sites have been retrieved and hundreds of active gas seepage structures on the seafloor were newly registered by multidisciplinary surveys. The gas hydrates occurrence at the various water depths from about 300 m to 1000 m in the study area were accompanied by active gas seepage-related phenomena in the sub-bottom, on the seafloor, and in the water column: well-defined upward gas migration structures (gas chimney) imaged by high-resolution seismic, hydroacoustic anomalies of gas emissions (gas flares) detected by echosounders, seafloor high backscatter intensities (seepage structures) imaged by side-scan sonar and bathymetric structures (pockmarks and mounds) mapped by single/multi-beam surveys, and very shallow SMTZ (sulphate-methane transition zone) depths, strong microbial activities and high methane concentrations measured in sediment/seawater samples. The highlights of the expeditions are shallow gas hydrate occurrences around 300 m in the water depth which is nearly closed to the upper boundary of gas hydrate stability zone in the area and a 2,000 m-high gas flare emitted from the deep seafloor.

Electromagnetic imaging of seafloor massive sulfide deposits at the Central Indian Ridge

NASA Astrophysics Data System (ADS)

Müller, Hendrik; Schwalenberg, Katrin

2016-04-01

Electromagnetics is considered to become a key method to evaluate the spatial extent, composition, and inner structure of Seafloor Massive Sulfide (SMS) deposits that contain potentially high grades of polymetallic minerals - essential ingredients for the growing high-tech industry. On land, airborne or ground electromagnetic methods are established as standard geophysical tools for locating and mapping massive sulfide deposits. In contrast to terrestrial systems, marine EM instrumentation to locate the heterogeneous and often sediment covered ore deposits are still in their infancy. To accomplish EM imaging of such complex deep sea environments, the GOLDEN EYE deep sea profiler has been developed at the University of Bremen by contract of the BGR, based on experiences with the MARUM NERIDIS benthic EM Profiler. GOLDEN EYE lands on the seafloor or glides with well constrained ground distance and is entirely controlled from the vessel. The rigid, circular fiberglass platform of 3.5 m in diameter hosts a frequency domain EM inloop sensor with horizontal transmitter of 3.34 m diameter and coaxial receiver and bucking coils. Operation frequencies between 10 and 20,000 Hz can be combined and jointly inverted to resolve the resistivity structure of the topmost 10 to 15 meters below seafloor with high lateral and near-surface resolution. We will present the concept and development state of this deep sea electromagnetic profiler, and first results from a recent cruise to the Edmond hydrothermal vent field in 3 km water depth. Preliminary analysis of the new data reveal electric conductivity values of more than 10 S/m associated with active and inactive SMS deposits. Simultaneously collected DC magnetic data indicate a local positive magnetic anomaly associated with the active Edmond hydrothermal vent field while nearby fossil deposits are characterized by negative magnetic anomalies. First 1D inversion results provide insights into the vertical extend and overburden thickness of the SMS deposits.

Integration of the stratigraphic aspects of very large sea-floor databases using information processing

USGS Publications Warehouse

Jenkins, Clinton N.; Flocks, J.; Kulp, M.; ,

2006-01-01

Information-processing methods are described that integrate the stratigraphic aspects of large and diverse collections of sea-floor sample data. They efficiently convert common types of sea-floor data into database and GIS (geographical information system) tables, visual core logs, stratigraphic fence diagrams and sophisticated stratigraphic statistics. The input data are held in structured documents, essentially written core logs that are particularly efficient to create from raw input datasets. Techniques are described that permit efficient construction of regional databases consisting of hundreds of cores. The sedimentological observations in each core are located by their downhole depths (metres below sea floor - mbsf) and also by a verbal term that describes the sample 'situation' - a special fraction of the sediment or position in the core. The main processing creates a separate output event for each instance of top, bottom and situation, assigning top-base mbsf values from numeric or, where possible, from word-based relative locational information such as 'core catcher' in reference to sampler device, and recovery or penetration length. The processing outputs represent the sub-bottom as a sparse matrix of over 20 sediment properties of interest, such as grain size, porosity and colour. They can be plotted in a range of core-log programs including an in-built facility that better suits the requirements of sea-floor data. Finally, a suite of stratigraphic statistics are computed, including volumetric grades, overburdens, thicknesses and degrees of layering. ?? The Geological Society of London 2006.

High-resolution geologic mapping of the inner continental shelf: Boston Harbor and approaches, Massachusetts

USGS Publications Warehouse

Ackerman, Seth D.; Butman, Bradford; Barnhardt, Walter A.; Danforth, William W.; Crocker, James M.

2006-01-01

This report presents the surficial geologic framework data and information for the sea floor of Boston Harbor and Approaches, Massachusetts (fig. 1.1). This mapping was conducted as part of a cooperative program between the U.S. Geological Survey (USGS), the Massachusetts Office of Coastal Zone Management (CZM), and the National Oceanic and Atmospheric Administration (NOAA). The primary objective of this project was to provide sea floor geologic information and maps of Boston Harbor to aid resource management, scientific research, industry and the public. A secondary objective was to test the feasibility of using NOAA hydrographic survey data, normally collected to update navigation charts, to create maps of the sea floor suitable for geologic and habitat interpretations. Defining sea-floor geology is the first steps toward managing ocean resources and assessing environmental changes due to natural or human activity. The geophysical data for these maps were collected as part of hydrographic surveys carried out by NOAA in 2000 and 2001 (fig. 1.2). Bottom photographs, video, and samples of the sediments were collected in September 2004 to help in the interpretation of the geophysical data. Included in this report are high-resolution maps of the sea floor, at a scale of 1:25,000; the data used to create these maps in Geographic Information Systems (GIS) format; a GIS project; and a gallery of photographs of the sea floor. Companion maps of sea floor to the north Boston Harbor and Approaches are presented by Barnhardt and others (2006) and to the east by Butman and others (2003a,b,c). See Butman and others (2004) for a map of Massachusetts Bay at a scale of 1:125,000. The sections of this report are listed in the navigation bar along the left-hand margin of this page. Section 1 (this section) introduces the report. Section 2 presents the large-format map sheets. Section 3 describes data collection, processing, and analysis. Section 4 summarizes the geologic history of the region and discusses geomorphic and anthropogenic features within the study area. Section 4 also provides references that contain additional information about the region. Appendix 1 provides GIS layers of all the data collected in this study, Appendix 2 contains the grain size textural analyses of sediment samples, and Appendix 3 contains bottom photographs of the sea floor in JPG format.

Determination of grain-size characteristics from electromagnetic seabed mapping data: A NW Iberian shelf study

NASA Astrophysics Data System (ADS)

Baasch, Benjamin; Müller, Hendrik; von Dobeneck, Tilo; Oberle, Ferdinand K. J.

2017-05-01

The electric conductivity and magnetic susceptibility of sediments are fundamental parameters in environmental geophysics. Both can be derived from marine electromagnetic profiling, a novel, fast and non-invasive seafloor mapping technique. Here we present statistical evidence that electric conductivity and magnetic susceptibility can help to determine physical grain-size characteristics (size, sorting and mud content) of marine surficial sediments. Electromagnetic data acquired with the bottom-towed electromagnetic profiler MARUM NERIDIS III were analysed and compared with grain size data from 33 samples across the NW Iberian continental shelf. A negative correlation between mean grain size and conductivity (R=-0.79) as well as mean grain size and susceptibility (R=-0.78) was found. Simple and multiple linear regression analyses were carried out to predict mean grain size, mud content and the standard deviation of the grain-size distribution from conductivity and susceptibility. The comparison of both methods showed that multiple linear regression models predict the grain-size distribution characteristics better than the simple models. This exemplary study demonstrates that electromagnetic benthic profiling is capable to estimate mean grain size, sorting and mud content of marine surficial sediments at a very high significance level. Transfer functions can be calibrated using grains-size data from a few reference samples and extrapolated along shelf-wide survey lines. This study suggests that electromagnetic benthic profiling should play a larger role for coastal zone management, seafloor contamination and sediment provenance studies in worldwide continental shelf systems.

A novel approach for studying submarine faults: the FOCUS project (FOCUS = Fiber Optic Cable Use for Seafloor studies of earthquake hazard and deformation)

NASA Astrophysics Data System (ADS)

Gutscher, M. A.; Royer, J. Y.; Graindorge, D.; Murphy, S.; Klingelhoefer, F.; Cattaneo, A.; Barreca, G.; Quetel, L.; Petersen, F.; Riccobene, G.; Urlaub, M.; Krastel, S.; Gross, F.; Kopp, H.

2017-12-01

Two-thirds of the earth's surface is covered by water and thus largely inaccessible to modern networks of seismological instruments. A novel use of fiber optic cables could help improve hazard assessment and increase early warning capability. Laser reflectometry using BOTDR (Brillouin Optical Time Domain Reflectometry), commonly used for structural health monitoring of large-scale engineering structures (e.g. - bridges, dams, pipelines, etc.) can measure very small strains (< 1 mm) at very large distances (10 - 200 km). This technique has never been used to monitor deformation caused by active faults on the seafloor. The objective of the FOCUS project is to demonstrate that this technique can measure small (1 - 2 cm) displacements on a primary test site offshore Sicily where the recently mapped North Alfeo Fault crosses the Catania EMSO seafloor observatory, 28 km long fiber optic cable. Two other EMSO test sites with fiber optic cables, the 100 km long Capo Passero (SE Sicily) and the 2 km long cable off Molene Island (W France) will also be studied. Initial reflectometry tests were performed on these three cables using a Febus BOTDR interrogator in June and July 2017. Unexpectedly high dynamic noise levels (corresponding to strains of 200 - 500 mm/m) were observed on the Molene cable, likely due to the high-energy, shallow water, open ocean environment. The tests on the EMSO infrastructure in Sicily indicated low experimental noise levels (20 - 30 mm/m) out to a distance of 15 km. BOTDR observations will have to be calibrated by other independent measurements. Therefore, targeted marine geophysical surveys of the seafloor along the trace of the cable and faults are planned, with the use of seafloor geodetic instruments to quantify fault displacement. Once the BOTDR fault-monitoring technique has been tested, demonstrated and calibrated offshore Eastern Sicily, the goal is to expand it to other fiber optic cable networks, either existing research networks in earthquake hazard zones (Japan, Cascadia) or to the Mediterranean region through access to retired (decommissioned) telecommunication cables or development of dual-use cables (two of the anticipated outcomes of the FOCUS project). This represents a potentially tremendous breakthrough in seismology, tectonics and natural hazard early warning capability.

Understanding Mn-nodule distribution and evaluation of related deep-sea mining impacts using AUV-based hydroacoustic and optical data

NASA Astrophysics Data System (ADS)

Peukert, Anne; Schoening, Timm; Alevizos, Evangelos; Köser, Kevin; Kwasnitschka, Tom; Greinert, Jens

2018-04-01

In this study, ship- and autonomous underwater vehicle (AUV)-based multibeam data from the German ferromanganese-nodule (Mn-nodule) license area in the Clarion-Clipperton Zone (CCZ; eastern Pacific) are linked to ground-truth data from optical imaging. Photographs obtained by an AUV enable semi-quantitative assessments of nodule coverage at a spatial resolution in the range of meters. Together with high-resolution AUV bathymetry, this revealed a correlation of small-scale terrain variations ( < 5 m horizontally, < 1 m vertically) with nodule coverage. In the presented data set, increased nodule coverage could be correlated with slopes > 1.8° and concave terrain. On a more regional scale, factors such as the geological setting (existence of horst and graben structures, sediment thickness, outcropping basement) and influence of bottom currents seem to play an essential role for the spatial variation of nodule coverage and the related hard substrate habitat. AUV imagery was also successfully employed to map the distribution of resettled sediment following a disturbance and sediment cloud generation during a sampling deployment of an epibenthic sledge. Data from before and after the disturbance allow a direct assessment of the impact. Automated image processing analyzed the nodule coverage at the seafloor, revealing nodule blanketing by resettling of suspended sediment within 16 h after the disturbance. The visually detectable impact was spatially limited to a maximum of 100 m distance from the disturbance track, downstream of the bottom water current. A correlation with high-resolution AUV bathymetry reveals that the blanketing pattern varies in extent by tens of meters, strictly following the bathymetry, even in areas of only slightly undulating seafloor ( < 1 m vertical change). These results highlight the importance of detailed terrain knowledge when engaging in resource assessment studies for nodule abundance estimates and defining mineable areas. At the same time, it shows the importance of high-resolution mapping for detailed benthic habitat studies that show a heterogeneity at scales of 10 to 100 m. Terrain knowledge is also needed to determine the scale of the impact by seafloor sediment blanketing during mining operations.

3D Photo Mosaicing of Tagiri Shallow Vent Field by an Autonomous Underwater Vehicle

NASA Astrophysics Data System (ADS)

Maki, Toshihiro; Kondo, Hayato; Ura, Tamaki; Sakamaki, Takashi; Mizushima, Hayato; Yanagisawa, Masao

Although underwater visual observation is an ideal method for detailed survey of seafloors, it is currently a costly process that requires the use of Remotely Operated Vehicles (ROVs) or Human Occupied Vehicles (HOVs), and can cover only a limited area. This paper proposes an innovative method to navigate an autonomous underwater vehicle (AUV) to create both 2D and 3D photo mosaics of seafloors with high positioning accuracy without using any vision-based matching. The vehicle finds vertical pole-like acoustic reflectors to use as positioning landmarks using a profiling sonar based on a SLAM (Simultaneous Localization And Mapping) technique. These reflectors can be either artificial or natural objects, and so the method can be applied to shallow vent fields where conventional acoustic positioning is difficult, since bubble plumes can also be used as landmarks as well as artificial reflectors. Path-planning is performed in real-time based on the positions and types of landmarks so as to navigate safely and stably using landmarks of different types (artificial reflector or bubble plume) found at arbitrary times and locations. Terrain tracker switches control reference between depth and altitude from the seafloor based on a local map of hazardous area created in real-time using onboard perceptual sensors, in order to follow rugged terrains at an altitude of 1 to 2 meters, as this range is ideal for visual observation. The method was implemented in the AUV Tri-Dog 1 and experiments were carried out at Tagiri vent field, Kagoshima Bay in Japan. The AUV succeeded in fully autonomous observation for more than 160 minutes to create a photo mosaic with an area larger than 600 square meters, which revealed the spatial distribution of detailed features such as tube-worm colonies, bubble plumes and bacteria mats. A fine bathymetry of the same area was also created using a light-section ranging system mounted on the vehicle. Finally a 3 D representation of the environment was created by merging the visual and bathymetry data.

Geodynamics of the South China Sea

NASA Astrophysics Data System (ADS)

Sibuet, Jean-Claude; Yeh, Yi-Ching; Lee, Chao-Shing

2016-12-01

The beginning of seafloor spreading in the South China Sea (SCS) is now established from IODP drilling Leg 349 at 33 Ma. Chron 12 (32 Ma) is the oldest chron identified in the SCS. The nature of the crust of the northeastern part of the SCS located north of chron C12, where chrons 15 to 17 were previously identified, is not oceanic but thinned continental crust intruded by volcanic elongated features emplaced 17-22 Ma ago. Based on magnetic anomaly identifications, the end of the SCS spreading could be either 15.5, 20.5 Ma (Briais et al., 1993; Barckhausen et al., 2014) or something else. However, as post-spreading magmatic activity ( 13-3.5 Ma) largely masks the spreading fabric in particular near the axis of the east sub-basin, published locations of the axial magnetic anomaly (extinct spreading axis) and spreading rates are not reliable. A contoured map of the extremely dense set of magnetic data shows that a few magnetic lineations belonging to the magnetic seafloor spreading fabric are still preserved and parallel to the N055° bathymetric seafloor spreading trends identified on swath-bathymetric maps in the central part of the SCS, suggesting that the extinct ridge axis is N055° trending with potential N145° transform faults. Based on published swath-bathymetric data, oceanic domains with different seafloor spreading lineaments have been delimited (N055°, N075° and N085°) and provide important constraints used to propose a kinematic sketch of the SCS opening. As a consequence, the Zhongnan faults zone, located between the east and southeast sub-basins, acted as a major fracture zone system during the SCS opening, with horizontal offsets varying from 50 km to 140 km. The flow-line pattern defined from the seafloor spreading lineaments and the few identified FZs have been used to highlight conjugate segments of continental margins. During the first phases of opening of the SCS, from the fit of continents to chron C10 (30 Ma), the N175° extension observed in the Xisha trough and eventually south of the Macclesfield Bank extends to the Qui Nhon ridge, located along the eastern margin of Vietnam, in the southward prolongation of the Red River fault system. Normal faults curve toward the south with a horsetail geometry interpreted as evidence for a few tens of kilometers of dextral motion along the Qui Nhon ridge. Since chron 10 and until the end of SCS opening, the plate boundary located between the southern South China Sea (SSCS) and EU plates jumped westward several times from the location of the Ulugan fault near Palawan to the western limit of the southwest basin, explaining the progressive formation of the SCS from east to west and giving the characteristic V-shape of the SCS. The opening of the whole SCS is linked and occurred simultaneously with the northward subduction of the proto-SCS whose suture is located south of Palawan and extends westwards in north Borneo.

A new Concept for High Resolution Benthic Mapping and Data Aquisition: MANSIO-VIATOR

NASA Astrophysics Data System (ADS)

Flögel, S.

2015-12-01

Environmental conditions within sensitive seafloor ecosystems such as cold-seep provinces or cold-water coral reef communities vary temporally and spatially over a wide range of scales. Some of these are regularly monitored via short periods of intense shipborne activity or low resolution, fixed location studies by benthic lander systems. Long term measurements of larger areas and volumes are ususally coupled to costly infrastructure investments such as cabled observatories. In space exploration, a combination of fixed and mobile systems working together are commonly used, e.g. lander systems coupled to rovers, to tackle observational needs that are very similar to deep-sea data aquisition. The analogies between space and deep-sea research motivated the German Helmholtz Association to setup the joint research program ROBEX (Robotic Exploration under extreme conditions). The program objectives are to identify, develop and verify technological synergies between the robotic exploration of e.g. the moon and the deep-sea. Within ROBEX, the mobility of robots is a vital element for research missions due to valuable scientifice return potential from different sites as opposed to static landers. Within this context, we developed a new mobile crawler system (VIATOR, latin for traveller) and a fixed lander component for energy and data transfer (MANSIO, latin for housing/shelter). This innovative MANSIO-VIATOR system has been developed during the past 2.5 years. The caterpillar driven component is developed to conduct high resolution opitcal mapping and repeated monitoring of physical and biogeochemical parameters along transects. The system operates fully autonomously including navigational components such as camera and laser scanners, as well as marker based near-field navigation used in space technology. This new concept of data aquisition by a submarine crawler in combination with a fixed lander further opens up marine exploration possibilities.

Ocean bottom pressure observations near the source of the 2011 Tohoku earthquake

NASA Astrophysics Data System (ADS)

Inazu, D.; Hino, R.; Suzuki, S.; Osada, Y.; Ohta, Y.; Iinuma, T.; Tsushima, H.; Ito, Y.; Kido, M.; Fujimoto, H.

2011-12-01

A Mw9.0 earthquake occurred off Miyagi, northeast Japan, on 11 March 2011 (hereafter mainshock). An earthquake of M7.3, considered to be the largest foreshock of the mainshock, occurred on 9 March 2011 near the mainshock hypocenter. A suite of seismic and geodetic variations related to these earthquakes was observed by autonomous, ocean bottom pressure (OBP) gauges at multiple sites (4 sites at present) near the sources within a distance of about 100 km. This paper presents the OBP records with a focus on the earthquakes. Thanks to correcting tides, instrumental drifts, and non-tidal oceanic variations, we can detect OBP signals of tsunamis and vertical seafloor deformation of the order of centimeters with timescales of less than months. In the following we review the detected signals and how to correct the OBP data. The coseismic seafloor displacement and the tsunami accompanied by the mainshock were of the order of meters and large enough to be distinctly identified (Ito et al., 2011, GRL). Co- and post-seismic seafloor displacement and tsunami accompanied by the foreshock were of the order of centimeters which is difficult to be identified from the raw OBP records. The first evident pulses of these tsunamis in the deep sea have durations (periods) of ~20 minutes and ~10 minutes, for the mainshock and the foreshock, respectively. Amounts of seafloor vertical displacement due to post-mainshock deformation reached a few tens of centimeters in two months. It is worth noting that elevation and depression of seafloor were detected at rates of a couple of centimeters in a day after the largest foreshock. The seafloor displacement of centimeters between the largest foreshock and the mainshock can be reasonably identified after correcting non-tidal oceanic variations. The oceanic variations are simulated by a barotropic ocean model driven by atmospheric disturbances (Inazu et al., 2011, Ann. Rep. Earth Simulator Center 2011). The model enables residual OBP time series of non-tidal oceanic variations off Miyagi to be reduced by less than 2 cm. In order to accurately detect signals of centimeters, detiding had better be carefully done analyzing in-situ data rather than using existing ocean tide models such as NAO.99Jb and FES2004. A BAYTAP-G program was used in the present study. Instrumental drifts are modeled by a popularly used, linear and exponential form (Watts and Kontoyiannis, 1990, J. Atmos. Oceanic Tech.). Seismological interpretations of the detected OBP signals of the seafloor displacement and the tsunamis will be demonstrated in the separate papers presented in this meeting.

Australian sea-floor survey data, with images and expert annotations.

PubMed

Bewley, Michael; Friedman, Ariell; Ferrari, Renata; Hill, Nicole; Hovey, Renae; Barrett, Neville; Marzinelli, Ezequiel M; Pizarro, Oscar; Figueira, Will; Meyer, Lisa; Babcock, Russ; Bellchambers, Lynda; Byrne, Maria; Williams, Stefan B

2015-01-01

This Australian benthic data set (BENTHOZ-2015) consists of an expert-annotated set of georeferenced benthic images and associated sensor data, captured by an autonomous underwater vehicle (AUV) around Australia. This type of data is of interest to marine scientists studying benthic habitats and organisms. AUVs collect georeferenced images over an area with consistent illumination and altitude, and make it possible to generate broad scale, photo-realistic 3D maps. Marine scientists then typically spend several minutes on each of thousands of images, labeling substratum type and biota at a subset of points. Labels from four Australian research groups were combined using the CATAMI classification scheme, a hierarchical classification scheme based on taxonomy and morphology for scoring marine imagery. This data set consists of 407,968 expert labeled points from around the Australian coast, with associated images, geolocation and other sensor data. The robotic surveys that collected this data form part of Australia's Integrated Marine Observing System (IMOS) ongoing benthic monitoring program. There is reuse potential in marine science, robotics, and computer vision research.

Australian sea-floor survey data, with images and expert annotations

PubMed Central

Bewley, Michael; Friedman, Ariell; Ferrari, Renata; Hill, Nicole; Hovey, Renae; Barrett, Neville; Pizarro, Oscar; Figueira, Will; Meyer, Lisa; Babcock, Russ; Bellchambers, Lynda; Byrne, Maria; Williams, Stefan B.

2015-01-01

This Australian benthic data set (BENTHOZ-2015) consists of an expert-annotated set of georeferenced benthic images and associated sensor data, captured by an autonomous underwater vehicle (AUV) around Australia. This type of data is of interest to marine scientists studying benthic habitats and organisms. AUVs collect georeferenced images over an area with consistent illumination and altitude, and make it possible to generate broad scale, photo-realistic 3D maps. Marine scientists then typically spend several minutes on each of thousands of images, labeling substratum type and biota at a subset of points. Labels from four Australian research groups were combined using the CATAMI classification scheme, a hierarchical classification scheme based on taxonomy and morphology for scoring marine imagery. This data set consists of 407,968 expert labeled points from around the Australian coast, with associated images, geolocation and other sensor data. The robotic surveys that collected this data form part of Australia's Integrated Marine Observing System (IMOS) ongoing benthic monitoring program. There is reuse potential in marine science, robotics, and computer vision research. PMID:26528396

Australian sea-floor survey data, with images and expert annotations

NASA Astrophysics Data System (ADS)

Bewley, Michael; Friedman, Ariell; Ferrari, Renata; Hill, Nicole; Hovey, Renae; Barrett, Neville; Pizarro, Oscar; Figueira, Will; Meyer, Lisa; Babcock, Russ; Bellchambers, Lynda; Byrne, Maria; Williams, Stefan B.

2015-10-01

This Australian benthic data set (BENTHOZ-2015) consists of an expert-annotated set of georeferenced benthic images and associated sensor data, captured by an autonomous underwater vehicle (AUV) around Australia. This type of data is of interest to marine scientists studying benthic habitats and organisms. AUVs collect georeferenced images over an area with consistent illumination and altitude, and make it possible to generate broad scale, photo-realistic 3D maps. Marine scientists then typically spend several minutes on each of thousands of images, labeling substratum type and biota at a subset of points. Labels from four Australian research groups were combined using the CATAMI classification scheme, a hierarchical classification scheme based on taxonomy and morphology for scoring marine imagery. This data set consists of 407,968 expert labeled points from around the Australian coast, with associated images, geolocation and other sensor data. The robotic surveys that collected this data form part of Australia's Integrated Marine Observing System (IMOS) ongoing benthic monitoring program. There is reuse potential in marine science, robotics, and computer vision research.

Sea-floor morphology and sedimentary environments in western Block Island Sound, offshore of Fishers Island, New York

USGS Publications Warehouse

McMullen, Katherine Y.; Poppe, Lawrence J.; Danforth, William W.; Blackwood, Dann S.; Winner, William G.; Parker, Castle E.

2015-01-01

Multibeam-bathymetric and sidescan-sonar data, collected by the National Oceanic and Atmospheric Administration in a 114-square-kilometer area of Block Island Sound, southeast of Fishers Island, New York, are combined with sediment samples and bottom photography collected by the U.S. Geological Survey from 36 stations in this area in order to interpret sea-floor features and sedimentary environments. These interpretations and datasets provide base maps for studies on benthic ecology and resource management. The geologic features and sedimentary environments on the sea floor are products of the area’s glacial history and modern processes. These features include bedrock, drumlins, boulders, cobbles, large current-scoured bathymetric depressions, obstacle marks, and glaciolacustrine sediments found in high-energy sedimentary environments of erosion or nondeposition; and sand waves and megaripples in sedimentary environments characterized by coarse-grained bedload transport. Trawl marks are preserved in lower energy environments of sorting and reworking. This report releases the multibeam-bathymetric, sidescan-sonar, sediment, and photographic data and interpretations of the features and sedimentary environments in Block Island Sound, offshore Fishers Island.

The elusive character of discontinuous deep-water channels: New insights from Lucia Chica channel system, offshore California

USGS Publications Warehouse

Maier, K.L.; Fildani, A.; Paull, C.K.; Graham, S.A.; McHargue, T.R.; Caress, D.W.; McGann, M.

2011-01-01

New high-resolution autonomous underwater vehicle (AUV) seafloor images, with 1 m lateral resolution and 0.3 m vertical resolution, reveal unexpected seafloor rugosity and low-relief (<10 m), discontinuous conduits over ~70 km2. Continuous channel thalwegs were interpreted originally from lower-resolution images, but newly acquired AUV data indicate that a single sinuous channel fed a series of discontinuous lower-relief channels. These discontinuous channels were created by at least four avulsion events. Channel relief, defined as the height from the thalweg to the levee crest, controls avulsions and overall stratigraphic architecture of the depositional area. Flowstripped turbidity currents separated into and reactivated multiple channels to create a distributary pattern and developed discontinuous trains of cyclic scours and megaflutes, which may be erosional precursors to continuous channels. The diverse features now imaged in the Lucia Chica channel system (offshore California) are likely common in modern and ancient systems with similar overall morphologies, but have not been previously mapped with lower-resolution detection methods in any of these systems. ?? 2011 Geological Society of America.

The Devils Mountain Fault zone: An active Cascadia upper plate zone of deformation, Pacific Northwest of North America

NASA Astrophysics Data System (ADS)

Barrie, J. Vaughn; Greene, H. Gary

2018-02-01

The Devils Mountain Fault Zone (DMFZ) extends east to west from Washington State to just south of Victoria, British Columbia, in the northern Strait of Juan de Fuca of Canada and the USA. Recently collected geophysical data were used to map this fault zone in detail, which show the main fault trace, and associated primary and secondary (conjugate) strands, and extensive northeast-southwest oriented folding that occurs within a 6 km wide deformation zone. The fault zone has been active in the Holocene as seen in the offset and disrupted upper Quaternary strata, seafloor displacement, and deformation within sediment cores taken close to the seafloor expression of the faults. Data suggest that the present DMFZ and the re-activated Leech River Fault may be part of the same fault system. Based on the length and previously estimated slip rates of the fault zone in Washington State, the DMFZ appears to have the potential of producing a strong earthquake, perhaps as large as magnitude 7.5 or greater, within 2 km of the city of Victoria.

End of the chain? Rugosity and fine-scale bathymetry from existing underwater digital imagery using structure-from-motion (SfM) technology

USGS Publications Warehouse

Storlazzi, Curt; Dartnell, Peter; Hatcher, Gerry; Gibbs, Ann E.

2016-01-01

The rugosity or complexity of the seafloor has been shown to be an important ecological parameter for fish, algae, and corals. Historically, rugosity has been measured either using simple and subjective manual methods such as ‘chain-and-tape’ or complicated and expensive geophysical methods. Here, we demonstrate the application of structure-from-motion (SfM) photogrammetry to generate high-resolution, three-dimensional bathymetric models of a fringing reef from existing underwater video collected to characterize the seafloor. SfM techniques are capable of achieving spatial resolution that can be orders of magnitude greater than large-scale lidar and sonar mapping of coral reef ecosystems. The resulting data provide finer-scale measurements of bathymetry and rugosity that are more applicable to ecological studies of coral reefs than provided by the more expensive and time-consuming geophysical methods. Utilizing SfM techniques for characterizing the benthic habitat proved to be more effective and quantitatively powerful than conventional methods and thus might portend the end of the ‘chain-and-tape’ method for measuring benthic complexity.

MGDS: Free, on-line, cutting-edge tools to enable the democratisation of geoscience data

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.; Ryan, W. B.; O'Hara, S.; Ferrini, V.; Arko, R. A.; Coplan, J.; Chan, S.; Carbotte, S. M.; Nitsche, F. O.; Bonczkowski, J.; Morton, J. J.; Weissel, R.; Leung, A.

2010-12-01

The availability of user-friendly, effective cyber-information resources for accessing and manipulating geoscience data has grown rapidly in recent years. Based at Lamont-Doherty Earth Observatory the MGDS group has developed a number of free tools that have wide application across the geosciences for both educators and researchers. A simple web page (http://www.marine-geo.org/) allows users to search for and download many types of data by key word, geographical region, or published citation. The popular Create Maps and Grids function and the downloadable Google Earth-compatible KML files appeal to a wide user base. MGDS MediaBank galleries (http://media.marine-geo.org/) enable users to view and download compelling images that are purposefully selected for their educational value from NSF-funded field programs. GeoMapApp (http://www.geomapapp.org), a free map-based interactive tool that works on any machine, is increasingly being adopted across a broad suite of users from middle school students to university researchers. GeoMapApp allows users to plot, manipulate and present data in an intuitive geographical reference frame. GeoMapApp offers a convenient way to explore the wide range of built-in data sets, to quickly generate maps and images that aid visualisation and, when importing their own gridded and tabular data sets, to access the same rich built-in functionality. A user guide, short multi-media tutorials, and webinar are available on-line. The regularly-updated Global Multi-Resolution Topography (GMRT) Synthesis is used as the default GeoMapApp base map and is an increasingly popular means to rapidly create location maps. Additionally, the layer manager offers a fast way to overlay and compare multiple data sets and is augmented by the ability to alter layer transparency so that underlying layers become visible. Examples of GeoMapApp built-in data sets include high-resolution land topography and ocean floor bathymetry derived from satellite and multi-beam swath mapping systems - these can be profiled, shaded, and contoured; geo-registered geochemical sample analyses from the EarthChem database; plate boundary, earthquake and volcano catalogues; physical oceanography global and water column data; seafloor photos and Alvin dive video images; geological maps at various scales; and, high-quality coastline, lakes and rivers data. Customised data portals offer enhanced functionality for multi-channel seismic profiles, drill core logs, and earthquake animations. GeoMapApp is used in many MARGINS undergraduate-level off-the-shelf interactive learning activities called mini-lessons (http://serc.carleton.edu/margins/collection.html). Examples of educational applicability will be shown.

DISTINCTIVE FINE-SCALE MORPHOLOGY OF HYDRATE RIDGE

NASA Astrophysics Data System (ADS)

Conlin, D.; Paull, C. K.; Caress, D. W.; Thomas, H.; Ussler, W.; Lundsten, E.; Thompson, D.

2009-12-01

High-resolution multibeam bathymetry (vertical precision of 0.15 m and horizontal resolution of 1.0 m) collected using an autonomous underwater vehicle (AUV) reveals in unprecedented detail the fine-scale morphology of the ridge crests on Hydrate Ridge, offshore Oregon. An inertial navigation system combined with a doppler velocity sonar allowed the AUV to fly pre-programmed grids with 150 m line spacing at 3 knots while maintaining an altitude of 50 m above the bottom. The data were collected on two 17.5-hour-long dives, one covering a 4.3 x 1.9 km area on the southern crest of Hydrate Ridge (769 to 930 m water depths) and the other covering a 5.2 x 2 km area on the northern crest of Hydrate Ridge (584 to 985 m water depths). These surveys cover the seafloor associated with gas hydrate research boreholes at ODP Sites 891 and 1245 to 1250). The southern crest of Hydrate Ridge is an area being considered for a cable-connected seafloor observatory. The surface of southern Hydrate Ridge is generally smooth except for two approximately circular patches with maximum diameters of 350 m and 500 m associated with a distinctive hummocky topography. The geometric relationships indicate that the edges of these patches are surrounded with small apparently erosional scarps and thus the strata exposed within the patches are stratigraphically lower than the surrounding smooth seafloor. The fine scale-topography within these patches is characterized by a highly irregular surface formed by small, sometimes circular ~0.5 m deep pits, local highs and lows separated by ~0.5 high ledges that could be formed by irregularly eroded bedding surfaces. Similar shapes also occur at larger scales. For example, a previously described feature called the “pinnacle” is a ~15 m topographic high in the center of one of these hummocky patches. The surface of northern Hydrate Ridge has similar patches of hummocky topography. However, the patches are more numerous, associated with greater relief, elongated in a NE-SW direction, and up to 1400 m long. Again, these patches appear to consist of more resistant strata that have been exposed by erosion. One crater-like feature is roughly circular with a raised rim surrounding a 40 m deep depression that is 300 m in diameter. A ridge extends over 600 m to the SW from the SW flank of this depression. This ridge has a trough near its crest that suggests it is an open crack associated with seafloor expansion formed when seafloor was up-lifted to form the ridge. Previous ROV and manned submersible dives indicate that methane-derived carbonates, chemosynthetic biological communities and near seafloor gas hydrate occurrences are associated with the patches of seafloor we now know are characterized by the distinctive hummocky topography. Apparently, these distinctive textures and seafloor features are produced by processes which are focused at methane-rich seafloor sites; however, previously available survey tools have not had the resolution to adequately image these features.

Deep seafloor arrivals: an unexplained set of arrivals in long-range ocean acoustic propagation.

PubMed

Stephen, Ralph A; Bolmer, S Thompson; Dzieciuch, Matthew A; Worcester, Peter F; Andrew, Rex K; Buck, Linda J; Mercer, James A; Colosi, John A; Howe, Bruce M

2009-08-01

Receptions, from a ship-suspended source (in the band 50-100 Hz) to an ocean bottom seismometer (about 5000 m depth) and the deepest element on a vertical hydrophone array (about 750 m above the seafloor) that were acquired on the 2004 Long-Range Ocean Acoustic Propagation Experiment in the North Pacific Ocean, are described. The ranges varied from 50 to 3200 km. In addition to predicted ocean acoustic arrivals and deep shadow zone arrivals (leaking below turning points), "deep seafloor arrivals," that are dominant on the seafloor geophone but are absent or very weak on the hydrophone array, are observed. These deep seafloor arrivals are an unexplained set of arrivals in ocean acoustics possibly associated with seafloor interface waves.

Being There & Getting Back Again: Half a Century of Deep Ocean Research & Discovery with the Human Occupied Vehicle "Alvin"

NASA Astrophysics Data System (ADS)

German, C. R.; Fornari, D. J.; Fryer, P.; Girguis, P. R.; Humphris, S. E.; Kelley, D. S.; Tivey, M.; Van Dover, C. L.; Von Damm, K.

2012-12-01

In 2013, Alvin returns to service after significant observational and operational upgrades supported by the NSF, NAVSEA & NOAA. Here we review highlights of the first half-century of deep submergence science conducted by Alvin, describe some of the most significant improvements for the new submarine and discuss the importance of these new capabilities for 21st century ocean science and education. Alvin has a long history of scientific exploration, discovery and intervention at the deep seafloor: in pursuit of hypothesis-driven research and in response to human impacts. One of Alvin's earliest achievements, at the height of the Cold War, was to help locate & recover an H-bomb in the Mediterranean, while the last dives completed, just ahead of the current refit, were to investigate the impacts of the Deep Water Horizon oil spill. Alvin has excelled in supporting a range of Earth & Life Science programs including, in the late 1970s, first direct observations and sampling of deep-sea hydrothermal vents and the unusual fauna supported by microbial chemosynthesis. The 1980s saw expansion of Alvin's dive areas to newly discovered hot-springs in the Atlantic & NE Pacific, Alvin's first dives to the wreck of RMS Titanic and its longest excursions away from WHOI yet, via Loihi Seamount (Hawaii) to the Mariana Trench. The 1990s saw Alvin's first event-response dives to sites where volcanic eruptions had just occurred at the East Pacific Rise & Juan de Fuca Ridge while the 2000s saw Alvin discover novel off-axis venting at Lost City. Observations from these dives fundamentally changed our views of volcanic and microbial processes within young ocean crust and even the origins of life! In parallel, new deep submergence capabilities, including manipulative experiments & sensor development, relied heavily on testing using Alvin. Recently, new work has focused on ocean margins where fluid flow from the seafloor results in the release of hydrocarbons and other chemical species that can sustain chemosynthetic seep ecosystems comparable to, and sometimes sharing species with, hot vents. What will Alvin's next 50 years discover? During 2011-12, Alvin has undergone a transformation, including a larger personnel sphere with more & larger viewports to provide improved overlapping fields of view for the pilot & observers. The new Alvin will be certified for operations to 4500m depth initially, but the new sphere will be 6500m-rated and planned future upgrades will ultimately allow the vehicle to dive that deep, enabling human access to 98% of the global ocean floor. This will allow the study of processes and dynamics of Earth's largest ecosystem (the abyssal plains) as well as margin and ridge environments and the overlying water column. Meantime, the current upgrades to Alvin already include a suite of scientific enhancements including new HD video & still imaging, sophisticated data acquisition systems for seafloor observations and mapping, a new work platform with greater payload capacity and improved observer ergonomics. The new Alvin is poised to play important roles in core Earth and Life science programs and to serve large-scale programs such as the Ocean Observatory Initiative (OOI) and the International Ocean Discovery Program (IODP). It will continue to attract, engage and inspire a new generation of scientists & students to explore and study the largest ecosystem on Earth, just as it has done throughout its first half century.

High-resolution AUV-based near bottom magnetic surveys at Palinuro volcanic complex (Southern Tyrrhenian Sea)

NASA Astrophysics Data System (ADS)

Cocchi, L.; Plunkett, S.; Augustin, N.; Petersen, S.

2013-12-01

In this paper we present the preliminary results of new near bottom magnetic datasets collected during the recent POS442 cruise using the autonomous underwater vehicle (AUV) Abyss. The Southern Tyrrhenian basin is characterized by deep seafloor interspersed with huge volcanic seamounts (e.g Vavilov and Marsili and those associated to the Aeolian volcanic arc), which were formed during eastward roll back of the Apennine subduction system. These submarine edifices often are affected by significant hydrothermal activity and associated mineral deposits such as those observed at Marsili, Palinuro and Panarea. The western part of the Palinuro volcanic complex is characterized by a half rim of a caldera-like structure and hosts hydrothermal barite-pyrite deposits. Until recently, the full extent of the hydrothermal system remained poorly defined, as exploration has been limited to a few specific sites. In November 2012, a set of high resolution near seafloor geophysical surveys were carried out using GEOMAR's AUV Abyss to attempt to better define the hydrothermal mineralization at Palinuro. Five AUV dives were performed, mapping a total area of 3.7 km2 over the western part of Palinuro. Geomar's Abyss AUV (a Remus6000 class vehicle) was equipped with an Applied Physics Systems flux gate magnetometer, writing to a stand alone data logger, powered by the AUV's main batteries. The 5 dives were performed within the same area but with different primary geophysical sensors (multibeam, sidescan sonar, subbottom profiler), survey altitudes above seafloor (100m, 40m) and line spacing (150m, 100m, 20m). Magnetic data was collect on all five dives. At the beginning of each dive, the AUV performed a set of calibration manoeuvres, involving a 360 degree heading variation, a set of three upwards/downwards pitches, and three port and starboard yaws. This magnetic data reveals the magnetization features of the seafloor in unprecedented detail, highlighting a complex pattern mostly due to extensive hydrothermal alteration. In particular, the strongest hydrothermal alteration related magnetic anomaly appears to be centred on a NNE-SSW fault zone located along the eastern margin of the caldera rims. Multibeam and sidescan sonar co-collected in this area by the AUV have delineated a previously unknown large hydrothermal chimney field and likely sulphide mounds, which extend along and within the caldera rim. Near bottom investigation confirms prior interpretation of extensive hydrothermal alteration being responsible of local magnetization lows previously inferred by ship-borne magnetic investigation. Usually, magnetic anomalies due to hydrothermal alteration are spatially limited, and are slightly detectable from ship borne surveys. The results of this magnetic survey demonstrate how near bottom mapping can significantly improve the resolution of the magnetic anomalies associated with hydrothermal deposits, facilitating a more detailed interpretation for geological modelling.

Terrestrial subaqueous seafloor dunes: Possible analogs for Venus

USGS Publications Warehouse

Neakrase, Lynn D.V.; Klose, Martina; Titus, Timothy N.

2017-01-01

Dunes on Venus, first discovered with Magellan Synthetic Aperture Radar (SAR) in the early 1990s, have fueled discussions about the viability of Venusian dunes and aeolian grain transport. Confined to two locations on Venus, the existence of the interpreted dunes provides evidence that there could be transportable material being mobilized into aeolian bedforms at the surface. However, because of the high-pressure high-temperature surface conditions, laboratory analog studies are difficult to conduct and results are difficult to extrapolate to full-sized, aeolian bedforms. Field sites of desert dunes, which are well-studied on Earth and Mars, are not analogous to what is observed on Venus because of the differences in the fluid environments. One potentially underexplored possibility in planetary science for Venus-analog dune fields could be subaqueous, seafloor dune fields on Earth. Known to the marine geology communities since the early 1960s, seafloor dunes are rarely cited in planetary aeolian bedform literature, but could provide a necessary thick-atmosphere extension to the classically studied aeolian dune environment literature for thinner atmospheres. Through discussion of the similarity of the two environments, and examples of dunes and ripples cited in marine literature, we provide evidence that subaqueous seafloor dunes could serve as analogs for dunes on Venus. Furthermore, the evidence presented here demonstrates the usefulness of the marine literature for thick-atmosphere planetary environments and potentially for upcoming habitable worlds and oceanic environment research program opportunities. Such useful cross-disciplinary discussion of dune environments is applicable to many planetary environments (Earth, Mars, Venus, Titan, etc.) and potential future missions.

DeepSurveyCam—A Deep Ocean Optical Mapping System

PubMed Central

Kwasnitschka, Tom; Köser, Kevin; Sticklus, Jan; Rothenbeck, Marcel; Weiß, Tim; Wenzlaff, Emanuel; Schoening, Timm; Triebe, Lars; Steinführer, Anja; Devey, Colin; Greinert, Jens

2016-01-01

Underwater photogrammetry and in particular systematic visual surveys of the deep sea are by far less developed than similar techniques on land or in space. The main challenges are the rough conditions with extremely high pressure, the accessibility of target areas (container and ship deployment of robust sensors, then diving for hours to the ocean floor), and the limitations of localization technologies (no GPS). The absence of natural light complicates energy budget considerations for deep diving flash-equipped drones. Refraction effects influence geometric image formation considerations with respect to field of view and focus, while attenuation and scattering degrade the radiometric image quality and limit the effective visibility. As an improvement on the stated issues, we present an AUV-based optical system intended for autonomous visual mapping of large areas of the seafloor (square kilometers) in up to 6000 m water depth. We compare it to existing systems and discuss tradeoffs such as resolution vs. mapped area and show results from a recent deployment with 90,000 mapped square meters of deep ocean floor. PMID:26828495

High-resolution surveys for geohazards and shallow gas: NW Adriatic (Italy) and Iskenderun Bay (Turkey)

USGS Publications Warehouse

Orange, D.L.; Garcia-Garcia, Ana; McConnell, D.; Lorenson, T.; Fortier, G.; Trincardi, F.; Can, E.

2005-01-01

The need for quantifying and understanding the distribution of shallow gas is both of academic interest and of relevance to offshore facilities. The combination of seafloor mapping, subbottom profiling, and multi-channel seismic data can provide information on regions of possible shallow gas, where the gas impacts the acoustic properties of the host material and the seafloor. In this paper, we present two case studies - one academic and one industry - that evaluate the distribution of shallow gas in two field areas in the Mediterranean. In the first case study, geophysical data from Iskenderun Bay, southeastern Turkey, indicate the presence and distribution of shallow gas. Pockmarks on the seafloor are associated with acoustic wipeout in the shallow subbottom data. Although deeper seismic data do not show bright spots or other indicators of possible gas, instantaneous frequency analysis clearly shows laterally restricted anomalies indicating gas-rich zones. The interpretation of possible shallow gas resulted in moving a proposed drilling location to a nearby area characterized by fewer (but still present) shallow gas signatures. In the second case study, cores acquired in the Po Delta, Adriatic Sea, provide quantitative ground-truthing of shallow gas - as suggested by geophysical data - and provide minimum estimates of the percentage of gas in the subsurface. Cores targeted on anomalous subbottom data yielded up to 41,000 ppm methane; cores with anomalous gas content are associated with thick recent flood deposits which may effectively isolate reactive terrigenous organic matter from biologic and physical re-working. ?? Springer 2005.

Long-term fluid expulsion revealed by carbonate crusts and pockmarks connected to subsurface gas anomalies and palaeo-channels in the central North Sea

NASA Astrophysics Data System (ADS)

Chand, Shyam; Crémière, Antoine; Lepland, Aivo; Thorsnes, Terje; Brunstad, Harald; Stoddart, Daniel

2017-06-01

Gas seepage through the seafloor into the water column is inferred based on acoustic mapping, video observations and geochemical analyses at multiple locations in the Viking Graben and Utsira High areas of the central North Sea. Flares in the Viking Graben occur both inside and along the periphery of a submarine melt water channel where pockmarks (up to 500 m in diameter) and methane-derived carbonate crusts are found on the seafloor, indicating focussing of fluid flow in the vicinity of the channel. The flares can be related to gas accumulations close to the seafloor as well as in Quaternary and deeper strata, observed as high-amplitude reflections on seismic data. Many palaeo-channels, which act as accumulation zones, are observed in the subsurface of both the Viking Graben and Utsira High areas. The deeper origin of gas is partially supported by results of isotope analyses of headspace gas collected from sediment samples of the Viking Graben, which show a mixed microbial/thermogenic origin whereas isotope data on free seeping gas in the Viking Graben indicate a predominantly microbial origin. Based on these lines of evidence, a structure-controlled fluid flow model is proposed whereby hydrocarbons migrate in limited amount from deep thermogenic reservoirs along faults, and these deep fluids are strongly diluted by microbial methane. Moreover, the existence of subsurface pockmarks at several stratigraphic levels indicates long-term fluid flow, interpreted to be caused by gas hydrate destabilisation and stress-related high overpressures.

Morphology and distribution of seamounts surrounding Easter Island

USGS Publications Warehouse

Rappaport, Y.; Naar, D.F.; Barton, C.C.; Liu, Z.-J.; Hey, R.N.

1997-01-01

We investigate the morphology and distribution of a seamount population on a section of seafloor influenced by both superfast seafloor spreading and hotspot volcanism. The population under investigation is part of a broad chain of seamounts extending eastward from the East Pacific Rise, near Easter Island. In order to define the morphological variability of the seamounts, basal shape, cross-sectional area, volume, flatness, and flank slope are plotted against height for 383 seamounts with heights greater than 200 m, based on bathymetry data collected by GLORI-B and SeaBeam 2000, during three cruises onboard the R/V Melville in the spring of 1993. Nearly complete swath mapping coverage of the seamounts is available for the analysis of size and shape distribution. We quantitatively describe the seamount population of this active region, in which seamounts cover ???27% of the seafloor, and account for ???4.2% of the total crustal volume. Over 50% of the total volume (61,000 km3) of seamounts used in this study is made up by the 14 largest seamounts, and the remaining volume is made up by the 369 smaller seamounts (>200 m in height). Our analysis indicates there are at least two seamount populations in the Easter Island-Salas y Gomez Island (25??-29??S, 113??-104??W) study area. One population of seamounts is composed of short seamounts (1200 m), shield-like, pointy cones (flatness ???1200 m) originate exclusively from a hotspot source, but only a portion of the smaller volcanoes (

Sea-floor geology of Long Island Sound north of Duck Pond Point, New York

USGS Publications Warehouse

McMullen, K.Y.; Poppe, L.J.; Danforth, W.W.; Blackwood, D.S.; Schaer, J.D.; Glomb, K.A.; Doran, E.F.

2012-01-01

The U.S. Geological Survey, the National Oceanic and Atmospheric Administration (NOAA), and the Connecticut Department of Environmental Protection are mapping the sea floor in coastal areas of the northeastern United States. As part of the project, more than 100 square kilometers of multibeam-echosounder data, 23 sediment samples, bottom video, and 86 still photographs were obtained from an area in Long Island Sound north of Duck Pond Point, New York, in the study area of NOAA survey H11999. This report delineates the sediment types and sea-floor features found within this area in order to better understand the sea-floor processes occurring in this part of Long Island Sound. The sea floor in the study area is dominated by ubiquitous sand-wave fields and three northeast-southwest trending bathymetric depressions. Barchanoid and transverse sand waves, including sinusoidal, bifurcating, arced, and straight-crested morphologies, are variably present. Asymmetrical sand-wave profiles indicate a westward to southwestward direction of sediment transport in most of the study area; current ripples and megaripples on the stoss slopes of the sand waves indicate transport is ongoing. The majority of the sediment on the sea floor is sand, although bouldery, gravelly, and muddy sediments are also present. Gray, cohesive mud crops out on the walls of some of the scour depressions associated with the troughs of large sand waves. Clasts of the muddy sediment scattered on the sea floor around the depressions demonstrate the intensity of the scour and suggest erosion of the underlying distal deltaic sediments.

Geotechnical and Geoacoustic Investigation of Seafloor Sediments on Boston Harbor Approaches

DTIC Science & Technology

2017-01-25

Geoacoustic Investigation of Seafloor Sediments on Boston Harbor Approaches Andrei Abelev Marine Physics Branch Marine Geosciences Division Peter...LIMITATION OF ABSTRACT Geotechnical and Geoacoustic Investigation of Seafloor Sediments on Boston Harbor Approaches Andrei Abelev, Peter Herdic...sampling and analysis series for classification and characterization of the surficial seafloor sediment in the Boston Harbor approaches . 25-01-2017

Towards a common effort in mapping marine geohazard features in the Mediterranean Sea. An unavoidable tool for the "blue growth" and marine spatial planning.

NASA Astrophysics Data System (ADS)

Chiocci, F. L.; Gorini, C.; Ercilla, G.; Sakellariou, D.; Casalbore, D.; Ridente, D.

2017-12-01

46,000 km of densely settled coastlines characterise the Mediterranean Sea. The region connects three continents, where the population doubled in the last 20 years, and among which, trade, maritime transports and migratory fluxes have been increasing. Moreover, the Mediterranean is by far the world's largest tourist destination, attracting almost a third of international tourists and generating more than a quarter of tourism-related revenues worldwide. The Mediterranean area lays in a plate boundary zone highly active in terms of seismicity, volcanism and submarine geological processes that over recent time have repeatedly demonstrated to be able to generate catastrophic events.. As an example 98 tsunamis where recorded in the Mediterranean on historical times (on average one every century). This census do not encompasses small events, such as minor tsunamis generated by submarine landslides that can produce serious damage in the near field. In Stromboli volcanic island (Southern Tyrrhenian Sea) for instance, the frequency of such events accounts for 5 events over the last century Mapping the seafloor for geohazard assessment becomes, therefore, especially important for the sustainable development of the marine and coastal areas both economically and socially. The increasing amount of high resolution seafloor mapping data allows defining geohazard features such as volcanic vents, active faults, submarine landslide, canyon head migrating bedforms fluid expulsion structure with a detail able to highlight even locally dangerous situations. If the marine geoscience community will be able to build common standards to interpret and cartographically represent the marine geohazard features private industries and public agencies will benefit of an unvaluable tool which will help in better exploit the marine resource and/or preserve the marine and coastal environment. This contribution will present spectacular examples of marine geohazards from the Mediterranean Seas; the results of MAGIC (Marine Geohazards along the Italian Coasts) Project, and the aims of the EU-H2020 SHAREMED infrastructure, a possible new initiative that will involve the whole Mediterranean geoscience community to realize geohazard feature mapping (see figure), will be presented as well.

VISIONS At-Sea Telepresence (VAST): Educating in Real Time, Seafloor to Shore

NASA Astrophysics Data System (ADS)

Sautter, L. R.; Fundis, A. T.; Kelley, D. S.; Delaney, J. R.; McNichol, E.; Stoermer, M.; Glenn, S. M.

2012-12-01

The University of Washington (UW) has recently led the VISIONS 2011 and 2012 cruises aboard the R/V Thompson to Axial Seamount on the Juan de Fuca Ridge, part of the NSF Ocean Observatory Initiative. During each cruise the VISIONS At-Sea Telepresence, or VAST Program was piloted, consisting of several live 30-60 minute shipboard broadcasts highlighted by streaming live HD video from the ROV ROPOS documenting investigations of the seamount's hydrothermal vents and recent lava flows. Broadcasts also included short lectures and pre-taped documentaries and seafloor video narrated live by shipboard scientists and students. Pilot audiences at UW, the College of Charleston and Rutgers University included undergraduate marine geology, oceanography and education students, high school students, graduate students and teachers. Multiple public audiences were also recipients of VAST programming, and all broadcasts were viewable in standard definition to any web users. Question/answer interactivity via Twitter and Skype were promoted throughout the broadcasts. To supplement live broadcasts with additional content, a VAST Program website was created on UW's Interactive Oceans site, providing a wealth of hyperlinked online resources covering six program themes, as well as a college-level online laboratory exercise, "Characterizing Lava Flow Morphologies." The online resources are primarily suited to inform a high school and older audience, and thus serves to reach a vast audience. The VAST Program was very successful at engaging and educating both formal and informal audiences. Preliminary VAST results documented by user surveys will be presented.

Using DSDP/ODP/IODP core photographs and digital images in the classroom

NASA Astrophysics Data System (ADS)

Pereira, Hélder; Berenguer, Jean-Luc

2017-04-01

Since the late 1960's, several scientific ocean drilling programmes have been uncovering the history of the Earth hidden beneath the seafloor. The adventure began in 1968 with the Deep Sea Drilling Project (DSDP) and its special drill ship, the Glomar Challenger. The next stage was the Ocean Drilling Program (ODP) launched in 1985 with a new drill ship, the JOIDES Resolution. The exploration of the ocean seafloor continued, between 2003 and 2013, through the Integrated Ocean Drilling Program (IODP). During that time, in addition to the JOIDES Resolution, operated by the US, the scientists had at their service the Chikyu, operated by Japan, and Mission-Specific-Platforms, funded and implemented by the European Consortium for Ocean Research Drilling. Currently, scientific ocean drilling continues through the collaboration of scientists from 25 nations within the International Ocean Discovery Program (IODP). Over the last 50 years, the scientific ocean drilling expeditions conducted by these programmes have drilled and cored more than 3500 holes. The numerous sediment and rock samples recovered from the ocean floor have provided important insight on the active biological, chemical, and geological processes that have shaped the Earth over millions of years. During an expedition, once the 9.5-meter long cores arrive from the seafloor, the technicians label and cut them into 1.5-meter sections. Next, the shipboard scientists perform several analysis using non-destructive methods. Afterward, the technicians split the cores into two halves, the "working half", which scientists sample and use aboard the drilling platform, and the "archive half", which is kept in untouched condition after being visually described and photographed with a digital imaging system. The shipboard photographer also takes several close-up pictures of the archive-half core sections. This work presents some examples of how teachers can use DSDP/ODP/IODP core photographs and digital images, available through the Janus and LIMS online databases, to develop inquiry-based learning activities for secondary level students.

Seafloor Geodetic Monitoring of the Central Andean Subduction Zone: The Geosea Array

NASA Astrophysics Data System (ADS)

Kopp, H.; Lange, D.; Contreras Reyes, E.; Behrmann, J. H.; McGuire, J. J.; Flueh, E. R.

2014-12-01

Seafloor geodesy has been identified as one of the central tools in marine geosciences to monitor seafloor deformation at high resolution. To quantify strain accumulation and assess the resultant hazard potential we urgently need systems to resolve seafloor crustal deformation. The GeoSEA (Geodetic Earthquake Observatory on the Seafloor) array consists of a seafloor transponder network comprising a total of 35 units and a wave glider acting as a surface unit (GeoSURF) to ensure satellite correspondence, data transfer and monitor system health. For horizontal direct path measurements, the system utilizes acoustic ranging techniques with a ranging precision better than 15 mm and long term stability over 2 km distance. Vertical motion is obtained from pressure gauges. Integrated inclinometers monitor station settlement in two horizontal directions. Travel time between instruments and the local water sound velocity will be recorded autonomously subsea without system or human intervention for up to 3.5 years. Data from the autonomous network on the seafloor can be retrieved via the integrated high-speed acoustic telemetry link without recovering the seafloor units. In late 2015 GeoSEA will be installed on the Iquique segment of the South America - Nazca convergent plate boundary to monitor crustal deformation. The Iquique seismic gap experienced the 2014 Mw 8.1 Pisagua earthquake, which apparently occurred within a local locking minimum. It is thus crucial to better resolve resolve strain in the forearc between the mainland and the trench in order to improve our understanding of forearc deformation required for hazard assessment. Mobile autonomous seafloor arrays for continuous measurement of active seafloor deformation in hazard zones have the potential to lead to transformative discoveries of plate boundary/fault zone tectonic processes and address a novel element of marine geophysical research.

Estimating Global Seafloor Total Organic Carbon Using a Machine Learning Technique and Its Relevance to Methane Hydrates

NASA Astrophysics Data System (ADS)

Lee, T. R.; Wood, W. T.; Dale, J.

2017-12-01

Empirical and theoretical models of sub-seafloor organic matter transformation, degradation and methanogenesis require estimates of initial seafloor total organic carbon (TOC). This subsurface methane, under the appropriate geophysical and geochemical conditions may manifest as methane hydrate deposits. Despite the importance of seafloor TOC, actual observations of TOC in the world's oceans are sparse and large regions of the seafloor yet remain unmeasured. To provide an estimate in areas where observations are limited or non-existent, we have implemented interpolation techniques that rely on existing data sets. Recent geospatial analyses have provided accurate accounts of global geophysical and geochemical properties (e.g. crustal heat flow, seafloor biomass, porosity) through machine learning interpolation techniques. These techniques find correlations between the desired quantity (in this case TOC) and other quantities (predictors, e.g. bathymetry, distance from coast, etc.) that are more widely known. Predictions (with uncertainties) of seafloor TOC in regions lacking direct observations are made based on the correlations. Global distribution of seafloor TOC at 1 x 1 arc-degree resolution was estimated from a dataset of seafloor TOC compiled by Seiter et al. [2004] and a non-parametric (i.e. data-driven) machine learning algorithm, specifically k-nearest neighbors (KNN). Built-in predictor selection and a ten-fold validation technique generated statistically optimal estimates of seafloor TOC and uncertainties. In addition, inexperience was estimated. Inexperience is effectively the distance in parameter space to the single nearest neighbor, and it indicates geographic locations where future data collection would most benefit prediction accuracy. These improved geospatial estimates of TOC in data deficient areas will provide new constraints on methane production and subsequent methane hydrate accumulation.

First Discovery and Investigation of a High-Temperature Hydrothermal Vent Field on the Ultra- Slow Spreading Southwest Indian Ridge

NASA Astrophysics Data System (ADS)

Tao, C.; Lin, J.; Guo, S.; Chen, Y. J.; Wu, G.; Han, X.; German, C. R.; Yoerger, D. R.; Zhu, J.; Zhou, N.; Su, X.; Baker, E. T.; Party, S.

2007-12-01

Two recent cruises on board the Chinese research vessel Dayang Yihao have successfully investigated the first active hydrothermal vent field to be located along the ultraslow spreading Southwest Indian Ridge (SWIR) and collected hydrothermal sulfide deposit samples. The newly discovered hydrothermal vent field is located on the western end of a magmatically robust spreading segment immediately west of the Gallieni transform fault. Preliminary evidence of strong turbidity anomalies was first measured during a Nov. 2005 cruise on board Dayang Yihao (InterRidge News, vol. 15, pp. 33-34, 2006). Color video footages of the seafloor in the vent-field area were first obtained by a deep-towed video camera in February 2007 during DY115-19 Leg 1, when significant water column turbidity anomalies, noticeable temperature anomalies and methane anomalies were also measured. The vent field was then precisely located, mapped, and photographed in great detail in February- March 2007 during the DY115-19 Leg 2, using the autonomous underwater vehicle ABE of the Woods Hole Oceanographic Institution. A high-resolution bathymetric map, more than 5,000 near-bottom color photos, and several types of water column data were all obtained during three phases of ABE dives. Within the approximately 120-m-long by 100-m-wide hydrothermal field, three groups of active high-temperature vents were identified and color images of black smokers and associated biological communities were obtained from ABE, flying 5 m above the seafloor. Hydrothermal sulfide deposits were then successfully obtained using a TV-guided grab.

First Discovery and Investigation of a High-Temperature Hydrothermal Vent Field on the Ultra- Slow Spreading Southwest Indian Ridge

NASA Astrophysics Data System (ADS)

Tao, C.; Lin, J.; Guo, S.; Chen, Y. J.; Wu, G.; Han, X.; German, C. R.; Yoerger, D. R.; Zhu, J.; Zhou, N.; Su, X.; Baker, E. T.; Party, S.

2004-12-01

Two recent cruises on board the Chinese research vessel Dayang Yihao have successfully investigated the first active hydrothermal vent field to be located along the ultraslow spreading Southwest Indian Ridge (SWIR) and collected hydrothermal sulfide deposit samples. The newly discovered hydrothermal vent field is located on the western end of a magmatically robust spreading segment immediately west of the Gallieni transform fault. Preliminary evidence of strong turbidity anomalies was first measured during a Nov. 2005 cruise on board Dayang Yihao (InterRidge News, vol. 15, pp. 33-34, 2006). Color video footages of the seafloor in the vent-field area were first obtained by a deep-towed video camera in February 2007 during DY115-19 Leg 1, when significant water column turbidity anomalies, noticeable temperature anomalies and methane anomalies were also measured. The vent field was then precisely located, mapped, and photographed in great detail in February- March 2007 during the DY115-19 Leg 2, using the autonomous underwater vehicle ABE of the Woods Hole Oceanographic Institution. A high-resolution bathymetric map, more than 5,000 near-bottom color photos, and several types of water column data were all obtained during three phases of ABE dives. Within the approximately 120-m-long by 100-m-wide hydrothermal field, three groups of active high-temperature vents were identified and color images of black smokers and associated biological communities were obtained from ABE, flying 5 m above the seafloor. Hydrothermal sulfide deposits were then successfully obtained using a TV-guided grab.

Maps showing late Pleistocene and Holocene evolution of the South Texas continental shelf

USGS Publications Warehouse

Pyle, Carroll A.; Berryhill, Henry L.; Trippet, Anita R.

1979-01-01

Interpretation of acoustical profiles has provided insight into the late Quaternary geologic history of the Continental Shelf off South Texas. (See the geographic index map on sheet 1 for location of the area studied.) The profiles reveal the interplay of tectonism, sedimentation, and cyclic fluctuations of sea level in the building and geologic evolution of the continental terrace. The sequence of sediments studied extends to about 200 meters (m) beneath the sea-floor surface. Four seismic-stratigraphic units underlain by four prominent sound reflectors were identified and mapped. This geologic synthesis, for which the research was funded by the U.S. Bureau of Land Management (BLM), is but one aspect of a coordinated, multidisciplinary environmental study of the South Texas Outer Continental Shelf sponsored by BLM (Berryhill, 1976, 1977). The environmental studies are keyed to the leasing of Federal Outer Continental Shelf (OCS) lands for petroleum exploration and production. Their purpose is to provide the data development of petroleum resources on the OCS, as well as to provide the basis for predicting the impact of oil and gas exploration and production on the marine environment. Of primary concern is the recognition of geologic conditions that might be hazardous to structures placed on the sea floor. Geologic hazards relate directly to the potential for significant movement of the sea floor in the future. Judging sea-floor stability and recognizing geologic features that are potentially hazardous require an understanding of the recent geologic history of the area, which, in turn, entails determining the relative rates and interactions of sedimentation and tectonism through time. In addition to the primary objective, the synthesis provides knowledge about the magnitude and extent of sea-level fluctuations in the western Gulf of Mexico, and it provides a depositional facies model of possible use in appraising the resource potential of the more deeply buried sediments.

Most Detailed Direct Measurements Yet of Turbidity Currents in the Deep Ocean: Monterey Coordinated Canyon Experiment

NASA Astrophysics Data System (ADS)

Paull, C. K.; Anderson, K.; Barry, J. P.; Caress, D. W.; Chaffey, M. R.; Gales, J. A.; Gwiazda, R.; Kieft, B.; Lundsten, E. M.; Maier, K. L.; McCann, M. P.; McGann, M.; O'Reilly, T. C.; Parsons, D. R.; Rosenberger, K. J.; Sumner, E.; Talling, P. J.; Xu, J.

2016-12-01

Submarine sediment gravity flows (turbidity currents) are among the most important sediment transport processes on Earth, yet there are remarkably few direct measurements of these events in action. The ongoing multi-institution Coordinated Canyon Experiment (CCE) is providing detailed measurements of turbidity currents using multiple sensors and sediment traps deployed in the axis of Monterey Canyon, offshore California, in 6-month long deployments from October 2015 to April 2017 together with seafloor sampling and repeated mapping of seafloor morphology. No previous study has deployed such a dense array of sensors along a turbidity current pathway. Instrumentation includes: an array of 6 moorings carrying downward looking acoustic Doppler current profilers (ADCP) and sediment traps distributed along the canyon axis from 270 to 1,850 m water depth; a benthic instrument node at 1,840 m holding ADCPs of three different frequencies recording on a common time base, as well as salinity, temperature, and turbidity sensors; a McLane profiler at 1,830 m monitoring the lower 500 m of the water column; an array of benthic event detectors (smart boulders) that record their transport within the base of a flow; and precision triangulation beacons to assess creep within the canyon floor. Repeated mapping of the canyon floor at nested grid resolutions ranging from 1-m to 1-cm is being conducted to understand changes in canyon floor morphology. The first 6-month long deployment has been completed and 8 sediment transport events recorded. Seven of these events were restricted to <520 m water depths. However, on January 15th 2016 a sediment-laden turbidity flow ran out for >50 km from <279 m to >1,860 m water depth with an average velocity of 5.4 m/sec. Individual moorings and instruments moved down-canyon up to 7.8 km during this event. The novel instrument array and mapping tools have successfully recorded the down-canyon evolution of the powerful flow in spectacular detail.

California State Waters Map Series—Offshore of Pigeon Point, California

USGS Publications Warehouse

Cochrane, Guy R.; Watt, Janet T.; Dartnell, Peter; Greene, H. Gary; Erdey, Mercedes D.; Dieter, Bryan E.; Golden, Nadine E.; Johnson, Samuel Y.; Endris, Charles A.; Hartwell, Stephen R.; Kvitek, Rikk G.; Davenport, Clifton W.; Krigsman, Lisa M.; Ritchie, Andrew C.; Sliter, Ray W.; Finlayson, David P.; Maier, Katherine L.; Cochrane, Guy R.; Cochran, Susan A.

2015-12-15

Seafloor habitats in the Offshore of Pigeon Point map area lie within the Shelf (continental shelf) megahabitat. Significant rocky outcrops, which support kelp-forest communities in the nearshore and rocky-reef communities in deeper water, dominate the inner shelf waters. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

Oculina Bank: Sidescan sonar and sediment data from a deep-water coral reef habitat off east-central Florida

USGS Publications Warehouse

Scanlon, Kathryn M.; Briere, Peter R.; Koenig, Christopher C.

1999-01-01

The Experimental Oculina Research Reserve (EORR) is located along the shelf edge off east-central Florida in water depths of about 60 to 100 meters. It is about 7.5 km wide and 43 km long and encompasses numerous high-relief rocky pinnacles where Oculina varicosa, a fragile deep-water coral, grows. These coral reefs have historically been the sites of prolific grouper spawning aggregations and have supported a large variety of other reef fish (Gilmore and Jones, 1992). Serious decline of the fishery in the area prompted the establishment of the EORR.The data presented in this open-file report were collected as part of a cooperative project between the U.S. Geological Survey (USGS) Coastal and Marine Geology Program and the National Marine Fisheries Service (NMFS) of the National Oceanographic and Atmospheric Administration (NOAA). The project’s goal was to provide reconnaissance geologic maps of the Experimental Oculina Research Reserve and an unprotected control area north of the reserve to support the NMFS studies of grouper spawning aggregations. To accomplish this, we collected sidescan sonar data and sediment samples throughout both study areas and used video and observations from a manned submersible at selected sites. This report includes digital mosaics of the sidescan sonar data, tabulated sediment data, and interpretative maps of the seafloor geology. The video and submersible observations are not included in this report, but were used in the interpretation of the sidescan data.

SEAFLOOR MANIFESTATIONS OF GAS VENTING AND NEAR SEAFLOOR GAS HYDRATE OCCURRENCES

NASA Astrophysics Data System (ADS)

Paull, C. K.; Ussler, W.; Caress, D. W.; Thomas, H.; Lundsten, E.; Riedel, M.; Lapham, L.

2009-12-01

High-resolution multibeam bathymetry and chirp seismic profiles collected with an AUV complimented by ROV observations and sampling reveal the fine scale geomorphology and seafloor structures associated with gas venting and/or near subsurface gas hydrate accumulations along the Pacific North American continental margin. Sites from Santa Monica Basin, northern and southern Hydrate Ridge, Barkley Canyon, Bullseye Vent and three previously unexplored vent sites near Bullseye Vent have been recently investigated. The new AUV data allow the identification of features and seafloor textures that were previously undetected and reveal the impact of gas venting, gas hydrate development and related phenomena on the seafloor morphology. Distinct geomorphic characteristics are interpreted to represent different stages in the development and evolution of the seafloor in these areas. The more mature features include distinct (>10 m high) elevated features (e.g., Santa Monica Mounds and the Hydrate Ridge Pinnacle), widespread areas where methane-derived carbonates are exposed on the surrounding seafloor (e.g., both Hydrate Ridge sites, and an unnamed ridge north of Bullseye Vent), circular seafloor craters with diameters of 3 to 50 m that appear to be associated with missing sections of the original seafloor (e.g., Bullseye Vent, northern Hydrate Ridge, and an unnamed ridge north of Bullseye Vent). Smaller mound-like features (<10 m in diameter and 1-3 m higher than the surrounding seafloor occur at Barkley Canyon and a newly explored vent system called Spinnaker Vent 6 km NW of Bullseye vent. Solid lens of gas hydrate are occasionally exposed along fractures on the sides of these mounds and suggest that these are push-up features associated with gas hydrate growth within the near seafloor sediments. The existence of both extensive methane-derived carbonates and chemosynthetic biological communities characterized by Vesicomya clams and Lamellibrachia tubeworms (which are slow growing) indicate that methane venting has occurred for protracted periods of time at these sites. However, the youngest appearing features occur in a gulch ~1 km NE of Bullseye Vent. They are associated with more-subtle (2-3 m in diameter and ~0.5 m high) seafloor mounds, with their crests crossed with small cracks lined with white bacterial mats, lack exposed methane-derived carbonates, Vesicomya clams or Lamellibrachia tubeworms. ROV-collected vibracores (<1.5 cm long) obtained from these subtle mounds characteristically encountered a hard layer at 30-60 cm sub-bottom. Where this layer was penetrated, methane bubbles would spontaneously gush out the hole and continue to flow out for more than an hour. These observations suggest that these small mounds are young features which have considerable volumes of over-pressured gas trapped near the seafloor. Together these observations reveal the integrated effect that gas and/or gas hydrate occurrences can have on the seafloor. The existence of apparently over-pressured gas within ~1 m of the seafloor has intriguing implications as to the geo-hazard potential of such sites.

Evaluating the earliest traces of Archean sub-seafloor life by NanoSIMS

NASA Astrophysics Data System (ADS)

Mcloughlin, N.; Grosch, E. G.; Kilburn, M.; Wacey, D.

2012-12-01

The Paleoarchean sub-seafloor has been proposed as an environment for the emergence of life with titanite microtextures in pillow lavas argued to be the earliest traces of microbial micro-tunneling (Furnes et al. 2004). Here we use a nano-scale ion microprobe (NanoSIMS) to evaluate possible geochemical traces of life in 3.45 Ga pillow lavas of the Barberton Greenstone Belt, South Africa. We investigated both surface and drill core samples from the original "Biomarker" outcrop in the Hooggenoeg Fm. Pillow lava metavolcanic glass contain clusters of segmented microcrystalline titanite filaments, ~4μm across and <200μm in length. Their size, shape and distribution have been directly compared to those found in recent oceanic crust. Thus it has been argued that they are the mineralized remains of tunnels formed by microbes that etched volcanic glass in the Archean sub-seafloor (Furnes et al 2004; Banerjee et al. 2006). Elemental mapping by NanoSIMS was undertaken to investigate reports of enrichments in carbon (possibly also nitrogen) along the margins of the microtextures previously interpreted as decayed cellular remains. We mapped for 12C-, 26CN-, 32S- along with 16O-, 28Si-, 24Mg+,27Al+, 40Ca+, 48Ti+ and 56Fe+ in chlorite and quartz hosted examples. The 12C- or 26CN- linings were not found along the margins of the microtextures in neither the original, nor the drill core samples, despite NanoSIMS being a more sensitive and higher-spatial-resolution technique than earlier microprobe X-ray maps. The absence of organic linings in these samples excludes a key line of evidence previously used to support the biogenicity of the microtextures. Sulfur isotopes 32S and 34S were measured by NanoSIMS on two types of sulfide: i) small sulfides (1-15μm) intimately associated with the microtextures and; ii) larger sulfides (10-60μm) that cross-cut the microtextures and are disseminated near a quartz-carbonate vein. The sulfide inclusions in the microtextures have strongly depleted δ34SVCDT values of -39.8 to +3.2‰ (n= 32). The magnitude, range and spatial heterogeneity of these δ34S values are consistent with an early microbial origin (McLoughlin et al. 2012). In contrast, sulfides cross-cutting the microtextures related to later veining have positive δ34S of +6.7 to +18.0‰ (n=20). These data can be compared to magmatic sulfides (δ34S = +3±3‰), Archean seawater (δ34S ca. +5‰) and Archean sedimentary sulfides (δ34S = +8 to -23‰). We propose that the Hooggenoeg sulfides probably formed during early fluid-rock-microbe interaction involving sulfate-reducing microbes (c.f. Rouxel et al. 2008). The pillow lavas were then metamorphosed, the glass transformed to a greenschist facies assemblage and titanite growth encapsulated the microbial sulfides. In summary, the extreme sulfur isotope fractionations reported here independently point towards the potential involvement of microbes in the alteration of Archean volcanic glass. In situ sulfur isotope analysis of basalt-hosted sulfides may provide an alternative approach to investigating the existence of an Archean sub-seafloor biosphere that does not require the mineralization of early microbial microborings with organic linings.

In Situ Measurement of Sediment Properties and Relationship to Backscatter: An Example From the ONR Mine Burial Program, Martha's Vineyard Coastal Observatory

NASA Astrophysics Data System (ADS)

Kraft, B. J.; Mayer, L. A.; Simpkin, P.; Goff, J. A.; Schwab, B.; Jenkins, C.

2002-12-01

In support of the Office of Naval Research­Ýs Mine Burial Program (MBP), in situ acoustic and resistivity measurements were obtained using ISSAP (In situ Sound Speed and Attenuation Probe), a device developed and built by the Center for Coastal and Ocean Mapping. One of the field areas selected for the MBP experiments is the WHOI coastal observatory based off Martha's Vineyard. This area is an active natural laboratory that will provide an ideal environment for testing and observing mine migration and burial patterns due to temporal seabed processes. Seawater and surficial sediment measurements of compressional wave sound speed, attenuation, and resistivity were obtained at 87 station locations. ISSAP used four transducer probes that were arranged in a square pattern giving approximate acoustic path lengths of 30 cm and 20 cm and a maximum insertion depth of 15 cm. The transducers operated at a frequency of 65 kHz. Five acoustic paths were used; two long paths and three short paths. A ~15.4 ŸYs pulse was generated at a repetition rate of 30 Hz. The received signal was combined with the transmitter gate pulse to generate a composite signal that was sampled at a frequency of 5 MHz with a National Instruments PCI-6110E data acquisition board. Two resistivity probes were mounted on the ISSAP platform and positioned in locations selected to limit interference with the acoustic signals. Also mounted on the platform were a color video camera and light, and a Jasco Research UWINSTRU, which measured platform pitch and roll angles, heading, depth, and temperature. At each of the 87 stations, the ISSAP probe was lowered into seawater to a location ~6m above the seafloor. A measurement cycle was completed by transmitting 10 pulses on each of the five paths and repeating three times for a total of 150 measurements. Resistivity measurements were obtained from both probes following completion of the acoustic measurements. The ISSAP platform was then lowered into the seafloor where two acoustic and resistivity measurement cycles were completed in the sediment. Probe insertion was aided by the video signal which provided imagery of the seafloor. The instrument was removed from the sediment and a second seawater measurement cycle completed. Typically, a sequence of measurements (300 acoustic and 40 resistivity measurements in seawater and similarly in sediment) was completed in ~ 4 minutes. Recorded waveforms were processed for sound speed using two methods, cross-correlation and envelope detection. Sediment attenuation was estimated using the filter-correlation method of Courtney and Mayer. In conjunction with the MBP experiments, several surveys (sidescan, interferometric bathymetry, and multibeam) have been completed. The ability to predict quantitative acoustical and physical properties of sediments from remotely measured backscatter data will be examined.

Seafloor Age-Stacking Reveals No Evidence for Milankovitch Cycle Influence on Abyssal Hills at Intermediate, Fast and Super-Fast Spreading Rates

NASA Astrophysics Data System (ADS)

Goff, J.; Zahirovic, S.; Müller, D.

2017-12-01

Recently published spectral analyses of seafloor bathymetry concluded that abyssal hills, highly linear ridges that are formed along seafloor spreading centers, exhibit periodicities that correspond to Milankovitch cycles - variations in Earth's orbit that affect climate on periods of 23, 41 and 100 thousand years. These studies argue that this correspondence could be explained by modulation of volcanic output at the mid-ocean ridge due to lithostatic pressure variations associated with rising and falling sea level. If true, then the implications are substantial: mapping the topography of the seafloor with sonar could be used as a way to investigate past climate change. This "Milankovitch cycle" hypothesis predicts that the rise and fall of abyssal hills will be correlated to crustal age, which can be tested by stacking, or averaging, bathymetry as a function of age; stacking will enhance any age-dependent signal while suppressing random components, such as fault-generated topography. We apply age-stacking to data flanking the Southeast Indian Ridge ( 3.6 cm/yr half rate), northern East Pacific Rise ( 5.4 cm/yr half rate) and southern East Pacific Rise ( 7.8 cm/yr half rate), where multibeam bathymetric coverage is extensive on the ridge flanks. At the greatest precision possible given magnetic anomaly data coverage, we have revised digital crustal age models in these regions with updated axis and magnetic anomaly traces. We also utilize known 2nd-order spatial statistical properties of abyssal hills to predict the variability of the age-stack under the null hypothesis that abyssal hills are entirely random with respect to crustal age; the age-stacked profile is significantly different from zero only if it exceeds this expected variability by a large margin. Our results indicate, however, that the null hypothesis satisfactorily explains the age-stacking results in all three regions of study, thus providing no support for the Milankovitch cycle hypothesis. The random nature of abyssal hills is consistent with a primarily faulted origin. .

Seafloor features delineate Late Wisconsinan ice stream configurations in eastern Parry Channel, Canadian Arctic Archipelago

NASA Astrophysics Data System (ADS)

MacLean, B.; Blasco, S.; Bennett, R.; Lakeman, T.; Pieńkowski, A. J.; Furze, M. F. A.; Hughes Clarke, J.; Patton, E.

2017-03-01

Multibeam imagery and 3.5 kHz sub-bottom profiles acquired from CCGS Amundsen between 2003 and 2013 by ArcticNet and the Ocean Mapping Group at the University of New Brunswick provide information on seafloor features, geology, bathymetry and morphology in eastern Parry Channel and the adjoining large channels in the Canadian Arctic Archipelago. Together these include Peel Sound, Barrow Strait, Lancaster Sound, Wellington Channel, Prince Regent Inlet, Admiralty Inlet and Navy Board Inlet. Those data are in part complemented by high resolution single channel seismic reflection profiles acquired by the Geological Survey of Canada in the 1970s and 1980s and by sediment cores that provide chronological and depositional information. The occurrence and pattern of streamlined mega-scale ridge and groove lineations (MSGLs) indicate that these waterways were occupied by glacial ice streams in the past. Chronological information from marine and adjoining terrestrial areas suggests a long history of glacial events ranging in time from Early Pleistocene to Late Wisconsinan. Seafloor morphology and MSGL trends together with terrestrial ice flow patterns indicate that ice streams flowed into Barrow Strait from Peel Sound and Wellington Channel, and ice streams in Prince Regent, Admiralty and Navy Board inlets flowed northward into and eastward along Lancaster Sound. Recession of the ice stream westward along Parry Channel occurred ∼16 cal ka BP to 10.8 cal ka BP. Thick ice-contact sediments deposited by a late ice advance from Prince Regent Inlet constitute the seabed across a large area of western Lancaster Sound. Timing for that late ice advance appears to be bracketed between the 11.5 cal ka BP lift-off of the eastern Parry ice stream north of Prince Leopold Island and the ∼10.0 cal ka BP deglaciation of Prince Regent Inlet. Seafloor morphology and lineation trends suggest that ice delivered by the ice stream in Peel Sound was the westernmost tributary to the ice stream occupying Lancaster Sound during the late Wisconsinan glaciation. Bathymetric data and MSGLs indicate that the ice stream emanating from M'Clintock Channel flowed westward.

Estimation of interplate coupling along Nankai trough considering the block motion model based on onland GNSS and seafloor GPS/A observation data using MCMC method

NASA Astrophysics Data System (ADS)

Kimura, H.; Ito, T.; Tadokoro, K.

2017-12-01

Introduction In southwest Japan, Philippine sea plate is subducting under the overriding plate such as Amurian plate, and mega interplate earthquakes has occurred at about 100 years interval. There is no occurrence of mega interplate earthquakes in southwest Japan, although it has passed about 70 years since the last mega interplate earthquakes: 1944 and 1946 along Nankai trough, meaning that the strain has been accumulated at plate interface. Therefore, it is essential to reveal the interplate coupling more precisely for predicting or understanding the mechanism of next occurring mega interplate earthquake. Recently, seafloor geodetic observation revealed the detailed interplate coupling distribution in expected source region of Nankai trough earthquake (e.g., Yokota et al. [2016]). In this study, we estimated interplate coupling in southwest Japan, considering block motion model and using seafloor geodetic observation data as well as onland GNSS observation data, based on Markov Chain Monte Carlo (MCMC) method. Method Observed crustal deformation is assumed that sum of rigid block motion and elastic deformation due to coupling at block boundaries. We modeled this relationship as a non-linear inverse problem that the unknown parameters are Euler pole of each block and coupling at each subfault, and solved them simultaneously based on MCMC method. Input data we used in this study are 863 onland GNSS observation data and 24 seafloor GPS/A observation data. We made some block division models based on the map of active fault tracing and selected the best model based on Akaike's Information Criterion (AIC): that is consist of 12 blocks. Result We find that the interplate coupling along Nankai trough has heterogeneous spatial distribution, strong at the depth of 0 to 20km at off Tokai region, and 0 to 30km at off Shikoku region. Moreover, we find that observed crustal deformation at off Tokai region is well explained by elastic deformation due to subducting Izu Micro Plate. We will present more details of our result, and discuss about not only interplate coupling but also rigid block motion, elastic deformation due to inland fault coupling, and resolution of estimated parameters.

Linking seafloor volcanism to rising carbon dioxide after the last ice age: observations from the Gulf of California

NASA Astrophysics Data System (ADS)

Rafter, P. A.; Herguera, J. C.; Carriquiry, J. D.; Solomon, E. A.; Southon, J. R.

2017-12-01

Seafloor volcanism at ocean spreading centers may have played an important role in late Pleistocene glacial terminations by increasing the global inventory of the greenhouse gas carbon dioxide (CO2). Gulf of California geology and hydrography offer a unique opportunity to quantify this carbon contribution because CO2 from local seafloor volcanism will reduce/reverse the vertical gradient of seawater radiocarbon (14C). We reconstructed this surface-to-deep gradient by measuring the 14C content of seafloor- and surface-dwelling foraminifera and find several surface-deep 14C reversals during the most recent deglaciation—a 14C distribution that has no analog in the modern ocean. We interpret these observations as representing increased CO2 efflux from the seafloor during deglaciation, linking plate tectonics with the carbon cycle and global climate via enhanced seafloor volcanism.

Development of GPS/A Seafloor Geodetic Network Along Japan Trench and Onset of Its Operation

NASA Astrophysics Data System (ADS)

Kido, M.; Fujimoto, H.; Osada, Y.; Ohta, Y.; Yamamoto, J.; Tadokoro, K.; Okuda, T.; Watanabe, T.; Nagai, S.; Kenji, Y.

2012-12-01

The Tohoku-oki earthquake in 2011 revealed that an M9-class giant earthquake could occur even in the old subduction zone and that coseismic slip can reach its frontal wedge, where we considered no significant stress had been accumulated in. One of the leading figure of such finding is in situ seafloor geodetic measurement, such as GPS/A technique for horizontal displacement and pressure gauge for vertical displacement. Japan Coast Guard and Japanese university group had developed several GPS/A sites near the source region of the Tohoku-oki earthquake and detected quite large coseismic movements over 20 m in there. Displacement vectors observed these sites showed systematic variation, i.e., mainly confined in the off-Miyagi area and getting larger near the trench. However, subsequent post-seismic deformation shows inexplicable distribution. In order to elucidate this complex feature, MEXT Japan has decided to construct dense and widely-extended GPS/A network along Japan trench, including deep area (~6000m). We, Tohoku and Nagoya universities, have firstly developed high-powered seafloor transponders with an omnidirectional acoustic unit that works at 6000 m deep ocean and enable acoustic ranging over 13 km slant length. In addition, using high-energy density battery, its lifetime is expected 10 years with normal operation. Secondly, we examined the optimal distribution of GPS/A sites forming a network, taken pre-existing sites into consideration. The new network consists of 20 sites (roughly four transponders at a single site and 86 transponders in total). The distribution is dense near the area of complex post-seismic deformation and extended over 400 km to cover the adjacent area of the source region, in where induced earthquake may be expected. The largest obstacle to draw network plan is seafloor topography. Because a GPS/A site is a seafloor benchmark, its installation must be on flat and locally stable spot. Since a single GPS/A site consists of three or more transponders in an area extending roughly the same dimension of its depth, flat spot is quite limited especially near the trench. The positions of the 20 sites were carefully determined using a high-definition bathymetry map. We already have constructed two sites, one of which is 5500 m depth, and successfully obtained acoustic data. In September, we will install rest of the sites (18 sites) and begin initial campaign survey. The second campaign is planned in November. We will introduce details of the network and report updated result in the talk.

Use of New Commercial, Off-the-Shelf, High-Definition Structure Scanning Fathometer/Depth Finder For Coastal Current Survey Operations

NASA Astrophysics Data System (ADS)

Roggenstein, E. B.; Gray, G.

2013-12-01

The National Oceanic and Atmospheric Administration (NOAA) National Ocean Service (NOS) Center for Operational Oceanographic Products and Services (COOPS) manages three national observing system programs. These are the National Water level Observation Network (NWLON) (210 stations), the 23 NOAA/Physical Oceanographic Real-Time Systems (PORTS), and National Currents Observing Program (NCOP) (approximately 70 deployments/year). In support of its mission COOPS operates and maintains a number of small boats. During vessel operations, side-scan sonar data are at times needed to provide information about bottom structure for future work in the area. For example, potential hazards, obstructions, or bottom morphology features that have not been identified on localized charts for a given area could be used to inform decisions on planned installations. Side-scan sonar capability is also important when attempting to reacquire bottom mounts that fail to surface at the conclusion of a current meter survey. Structure mapping and side-scan capabilities have been added to recent consumer-level, commercial, off-the-shelf fathometers, generally intended for recreational, commercial fishing, and diving applications. We are proposing to investigate these systems' viability for meeting survey requirements. We assess their ability to provide a flexible alternative to research/commercial oceanographic level side-scan system at a significant cost savings. Such systems could provide important information to support scientific missions that require qualitative seafloor imagery.

OceanVideoLab: A Tool for Exploring Underwater Video

NASA Astrophysics Data System (ADS)

Ferrini, V. L.; Morton, J. J.; Wiener, C.

2016-02-01

Video imagery acquired with underwater vehicles is an essential tool for characterizing seafloor ecosystems and seafloor geology. It is a fundamental component of ocean exploration that facilitates real-time operations, augments multidisciplinary scientific research, and holds tremendous potential for public outreach and engagement. Acquiring, documenting, managing, preserving and providing access to large volumes of video acquired with underwater vehicles presents a variety of data stewardship challenges to the oceanographic community. As a result, only a fraction of underwater video content collected with research submersibles is documented, discoverable and/or viewable online. With more than 1 billion users, YouTube offers infrastructure that can be leveraged to help address some of the challenges associated with sharing underwater video with a broad global audience. Anyone can post content to YouTube, and some oceanographic organizations, such as the Schmidt Ocean Institute, have begun live-streaming video directly from underwater vehicles. OceanVideoLab (oceanvideolab.org) was developed to help improve access to underwater video through simple annotation, browse functionality, and integration with related environmental data. Any underwater video that is publicly accessible on YouTube can be registered with OceanVideoLab by simply providing a URL. It is strongly recommended that a navigational file also be supplied to enable geo-referencing of observations. Once a video is registered, it can be viewed and annotated using a simple user interface that integrates observations with vehicle navigation data if provided. This interface includes an interactive map and a list of previous annotations that allows users to jump to times of specific observations in the video. Future enhancements to OceanVideoLab will include the deployment of a search interface, the development of an application program interface (API) that will drive the search and enable querying of content by other systems/tools, the integration of related environmental data from complementary data systems (e.g. temperature, bathymetry), and the expansion of infrastructure to enable broad crowdsourcing of annotations.

High resolution near-bed observations in winter near Cape Hatteras, North Carolina

USGS Publications Warehouse

Martini, Marinna A.; Armstrong, Brandy N.; Warner, John C.

2010-01-01

The U.S. Geological Survey (USGS) Coastal and Marine Science Center in Woods Hole, Massachusetts, is leading an effort to understand the regional sediment dynamics along the coastline of North and South Carolina. As part of the Carolinas Coastal Change Processes Project, a geologic framework study in June of 2008 by the Woods Hole Coastal and Marine Science Center's Sea Floor Mapping Group focused on the seaward limit of Diamond Shoals and provided high resolution bathymetric data, surficial sediment characteristics, and subsurface geologic stratigraphy. These data also provided unprecedented guidance to identify deployment locations for tripods and moorings to investigate the processes that control sediment transport at Diamond Shoals. Equipment was deployed at three sites from early January, 2009 through early May, 2009: north and south of the shoals at 15 m depth, and at the tip at 24 m depth. Many strong storm systems were recorded during that time period. Mounted on the tripods were instruments to measure surface waves, pressure, current velocity, bottom turbulence, suspended-sediment profiles, and sea-floor sand-ripple bedforms. Many instruments were designed and programmed to sample in high resolution in time and space, as fast as 8 Hz hourly bursts and as small as 6 cm bin sizes in near bottom profiles. A second tripod at the north site also held a visual camera system and sonar imaging system which document seafloor bedforms. The region is known for its dynamics, and one of the tripods tipped over towards the end of the experiment. A preliminary look at the data suggests the region is characterized by high energy. Raw data from a burst recorded at the south site on Mar. 26th show instantaneous flow speed at 150 cm/s at 0.5 m above the seabed. This paper reports preliminary highlights of the observations, based on raw data, and lessons learned from a deployment of large tripod systems in such a dynamic location.

High resolution near-bed observations in winter near Cape Hatteras, North Carolina

USGS Publications Warehouse

Martini, M.; Armstrong, B.; Warner, J.C.

2009-01-01

The U.S. Geological Survey (USGS) Coastal and Marine Science Center in Woods Hole, Massachusetts, is leading an effort to understand the regional sediment dynamics along the coastline of North and South Carolina. As part of the Carolinas Coastal Change Processes Project, a geologic framework study in June of 2008 by the Woods Hole Coastal and Marine Science Center's Sea Floor Mapping Group focused on the seaward limit of Diamond Shoals and provided high resolution bathymetric data, surficial sediment characteristics, and subsurface geologic stratigraphy. These data also provided unprecedented guidance to identify deployment locations for tripods and moorings to investigate the processes that control sediment transport at Diamond Shoals. Equipment was deployed at three sites from early January, 2009 through early May, 2009: north and south of the shoals at 15 m depth, and at the tip at 24 m depth. Many strong storm systems were recorded during that time period. Mounted on the tripods were instruments to measure surface waves, pressure, current velocity, bottom turbulence, suspended-sediment profiles, and sea-floor sand-ripple bedforms. Many instruments were designed and programmed to sample in high resolution in time and space, as fast as 8 Hz hourly bursts and as small as 6 cm bin sizes in near bottom profiles. A second tripod at the north site also held a visual camera system and sonar imaging system which document seafloor bedforms. The region is known for its dynamics, and one of the tripods tipped over towards the end of the experiment. A preliminary look at the data suggests the region is characterized by high energy. Raw data from a burst recorded at the south site on Mar. 26th show instantaneous flow speed at 150 cm/s at 0.5 m above the seabed. This paper reports preliminary highlights of the observations, based on raw data, and lessons learned from a deployment of large tripod systems in such a dynamic location. ??2009 MTS.

Distinctive Geomorphology of Gas Venting and Near Seafloor Gas Hydrate-Bearing sites

NASA Astrophysics Data System (ADS)

Paull, C. K.; Caress, D. W.; Lundsten, E.; Anderson, K.; Gwiazda, R.; McGann, M. L.; Edwards, B. D.; Riedel, M.; Herguera, J.

2012-12-01

High-resolution multibeam bathymetry and chirp seismic-reflection profiles collected with an Autonomous Underwater Vehicle (AUV) complimented by Remotely Operated Vehicle (ROV) observations and sampling reveal the fine scale geomorphology associated with gas venting and/or near subsurface gas hydrate accumulations along the Pacific North American continental margin (Santa Monica Basin, Hydrate Ridge, Eel River, Barkley Canyon, and Bullseye Vent) and along the transform faults in the Gulf of California. At the 1 m multibeam grid resolution of the new data, distinctive features and textures that are undetectable at lower resolution, show the impact of gas venting, gas hydrate development, and related phenomena on the seafloor morphology. Together a suite of geomorphic characteristics illustrates different stages in the development of seafloor gas venting systems. The more mature and/or impacted areas are associated with widespread exposures of methane-derived carbonates, which form broken and irregular seafloor pavements with karst-like voids in between the cemented blocks. These mature areas also contain elevated features >10 m high and circular seafloor craters with diameters of 3-50 m that appear to be associated with missing sections of the original seafloor. Smaller mound-like features (<10 m in diameter and 1-3 m higher than the surrounding seafloor) occur at multiple sites. Solid lenses of gas hydrate are occasionally exposed along fractures on the sides of these mounds and suggest that these are push-up features associated with gas hydrate growth within the near seafloor sediments. The youngest appearing features are associated with more-subtle (<3 m in diameter and ~0.5 m high) seafloor mounds, the crests of which are crossed with small cracks lined with white bacterial mats. ROV-collected (<1.5 m long) cores obtained from these subtle mounds encountered a hard layer at 30-60 cm sub-bottom. When this layer was penetrated, methane bubbles gushed out and continued to flow out for over an hour. These observations indicate that these small mounds are young features that trap considerable volumes of gas near the seafloor. Together these observations reveal the integrated effect that gas and/or gas hydrate occurrences can have on the seafloor. The existence of gaseous methane within ~1 m of the seafloor has intriguing implications as to the geo-hazard potential of such sites.

Measurement of Seafloor Deformation in the Marine Sector of the Campi Flegrei Caldera (Italy)

NASA Astrophysics Data System (ADS)

Iannaccone, Giovanni; Guardato, Sergio; Donnarumma, Gian Paolo; De Martino, Prospero; Dolce, Mario; Macedonio, Giovanni; Chierici, Francesco; Beranzoli, Laura

2018-01-01

We present an assessment of vertical seafloor deformation in the shallow marine sector of the Campi Flegrei caldera (southern Italy) obtained from GPS and bottom pressure recorder (BPR) data, acquired over the period April 2016 to July 2017 in the Gulf of Pozzuoli by a new marine infrastructure, MEDUSA. This infrastructure consists of four fixed buoys with GPS receivers; each buoy is connected by cable to a seafloor multisensor module hosting a BPR. The measured maximum vertical uplift of the seafloor is about 4.2 ± 0.4 cm. The MEDUSA data were then compared to the expected vertical displacement in the marine sector according to a Mogi model point source computed using only GPS land measurements. The results show that a single point source model of deformation is able to explain both the GPS land and seafloor data. Moreover, we demonstrate that a network of permanent GPS buoys represents a powerful tool to measure the seafloor vertical deformation field in shallow water. The performance of this system is comparable to on-land high-precision GPS networks, marking a significant achievement and advance in seafloor geodesy and extending volcano monitoring capabilities to shallow offshore areas (up to 100 m depth). The GPS measurements of MEDUSA have also been used to confirm that the BPR data provide an independent measure of the seafloor vertical uplift in shallow water.

Geologic mapping on the deep seafloor: Reconstructing lava flow emplacement and eruptive history at the Galápagos Spreading Center

NASA Astrophysics Data System (ADS)

McClinton, J. T.; White, S.; Colman, A.; Sinton, J. M.; Bowles, J. A.

2012-12-01

The deep seafloor imposes significant difficulties on data collection that require the integration of multiple data sets and the implementation of unconventional geologic mapping techniques. We combine visual mapping of geological contacts by submersible with lava flow morphology maps and relative and absolute age constraints to create a spatiotemporal framework for examining submarine lava flow emplacement at the intermediate-spreading, hotspot-affected Galápagos Spreading Center (GSC). We mapped 18 lava flow fields, interpreted to be separate eruptive episodes, within two study areas at the GSC using visual observations of superposition, surface preservation and sediment cover from submersible and towed camera surveys, augmented by high-resolution sonar surveys and sample petrology [Colman et al., Effects of variable magma supply on mid-ocean ridge eruptions: Constraints from mapped lava flow fields along the Galápagos Spreading Center; 2012 G3]. We also mapped the lava flow morphology within the majority of these eruptive units using an automated, machine-learning classification method [McClinton et al., Neuro-fuzzy classification of submarine lava flow morphology; 2012 PE&RS]. The method combines detailed geometric, acoustic, and textural attributes derived from high-resolution sonar data with visual observations and a machine-learning algorithm to classify submarine lava flow morphology as pillows, lobates, or sheets. The resulting lava morphology maps are a valuable tool for interpreting patterns in the emplacement of submarine lava flows at a mid-ocean ridge (MOR). Within our study area at 92°W, where the GSC has a relatively high magma supply, high effusion rate sheet and lobate lavas are more abundant in the oldest mapped eruptive units, while the most recent eruptions mostly consist of low effusion rate pillow lavas. The older eruptions (roughly 400yrs BP by paleomagnetic intensity) extend up to 1km off axis via prominent channels and tubes, while the most recent eruptions (<100yrs BP by paleomagnetic intensity) are mainly on-axis pillow ridges and domes. These spatial and temporal trends suggest a gradual transition from low-relief, "paving" eruptions to relief-building, "constructional" eruptions. In our second study area at 95°W, where magma supply is lower, eruptions mostly consist of axial seamounts and irregularly shaped clusters of pillow mounds. Many have summit plateaus with inflated, partially collapsed lobate lavas suggesting variable effusion rates and topographic influence on lava flows. In addition, a relatively extensive (~9.5km2) flow field of inflated lobate and sheet lavas erupted from vents ~1km north of the ridge axis and flowed ~1km into the inner axial graben through channels and tubes, ponding against older structures and leaving prominent "bathtub rings" and collapse features. This eruption provides direct evidence that large, high effusion rate eruptions can occur in low magma supply settings at MORs.

Structure, Geochemistry, and Kinematics at the Slow-Spreading 16°30'N Region of the Mid-Atlantic Ridge

NASA Astrophysics Data System (ADS)

Urann, B.; Dick, H. J.; Smith, D. K.

2017-12-01

The 16°30'N region of the Mid-Atlantic Ridge is characterized by active detachment faulting and weakly magmatic crustal accretion, where abundant mantle peridotite is exposed on the seafloor along with pillow basalts, gabbro, and diabase. We present a comprehensive tectonic, petrologic, and geochemical analysis of this slow-spreading ridge section. We utilize the high density dredging from R/V Knorr in 2013 to structurally map the seafloor, in an attempt to understand crustal architecture and the interplay between ephemeral magmatism and crustal accretion. Geochemically, this region exposes some of the most refractory mantle yet found in the oceans, with olivine Mg# of 91 to 92, spatially consistent yet elevated chromian spinel Cr# of 45 to 60, and clinopyroxene ultra-depleted in rare earth elements. Such refractory mantle is at odds with anhydrous melting at a mid-ocean ridge setting at typical mantle potential temperatures, and is more characteristic of a hydrous melting regime. Our data suggests that portions of the Mid-Atlantic Ridge are underlain by highly refractory buoyant relict mantle, likely recycled from a previous hydrous melting event.

Arctic and N Atlantic Crustal Thickness and Oceanic Lithosphere Distribution from Gravity Inversion

NASA Astrophysics Data System (ADS)

Kusznir, Nick; Alvey, Andy

2014-05-01

The ocean basins of the Arctic and N. Atlantic formed during the Mesozoic and Cenozoic as a series of distinct ocean basins, both small and large, leading to a complex distribution of oceanic crust, thinned continental crust and rifted continental margins. The plate tectonic framework of this region was demonstrated by the pioneering work of Peter Ziegler in AAPG Memoir 43 " Evolution of the Arctic-North Atlantic and the Western Tethys" published in 1988. The spatial evolution of Arctic Ocean and N Atlantic ocean basin geometry and bathymetry are critical not only for hydrocarbon exploration but also for understanding regional palaeo-oceanography and ocean gateway connectivity, and its influence on global climate. Mapping crustal thickness and oceanic lithosphere distribution represents a substantial challenge for the Polar Regions. Using gravity anomaly inversion we have produced comprehensive maps of crustal thickness and oceanic lithosphere distribution for the Arctic and N Atlantic region, We determine Moho depth, crustal basement thickness, continental lithosphere thinning and ocean-continent transition location using a 3D spectral domain gravity inversion method, which incorporates a lithosphere thermal gravity anomaly correction (Chappell & Kusznir 2008). Gravity anomaly and bathymetry data used in the gravity inversion are from the NGA (U) Arctic Gravity Project and IBCAO respectively; sediment thickness is from a new regional compilation. The resulting maps of crustal thickness and continental lithosphere thinning factor are used to determine continent-ocean boundary location and the distribution of oceanic lithosphere. Crustal cross-sections using Moho depth from the gravity inversion allow continent-ocean transition structure to be determined and magmatic type (magma poor, "normal" or magma rich). Our gravity inversion predicts thin crust and high continental lithosphere thinning factors in the Eurasia, Canada, Makarov, Podvodnikov and Baffin Basins consistent with these basins being oceanic. Larger crustal thicknesses, in the range 20 - 30 km, are predicted for the Lomonosov, Alpha and Mendeleev Ridges. Crustal basement thicknesses of 10-15 km are predicted under the Laptev Sea which is interpreted as highly thinned continental crust formed at the eastward continuation of Eurasia Basin sea-floor spreading. Thin continental or oceanic crust of thickness 7 km or less is predicted under the North Chukchi Basin and has major implications for understanding the Mesozoic and Cenozoic plate tectonic history of the Siberian and Chukchi Amerasia Basin margins. Restoration of crustal thickness and continent-ocean boundary location from gravity inversion may be used to test and refine plate tectonic reconstructions. Using crustal thickness and continental lithosphere thinning factor maps with superimposed shaded-relief free-air gravity anomaly, we improve the determination of pre-breakup rifted margin conjugacy and sea-floor spreading trajectory within the Arctic and N Atlantic basins. By restoring crustal thickness & continental lithosphere thinning maps of the Eurasia Basin & NE Atlantic to their initial post-breakup configuration we show the geometry and segmentation of the rifted continental margins at their time of breakup, together with the location of highly-stretched failed breakup basins and rifted micro-continents. We interpret gravity inversion crustal thicknesses underneath Morris Jessop Rise & Yermak Plateau as continental crust which provided a barrier to the tectonic and palaeo-oceanic linkage between the Arctic & North Atlantic until the Oligocene. Before this time, we link the seafloor spreading within the Eurasia Basin to that in Baffin Bay.

Detecting deep sea hydrothermal vents with a split-beam echosounder

NASA Astrophysics Data System (ADS)

Gray, L. M.; Jerram, K.

2016-12-01

In May 2016, the NOAA Office of Exploration and Research exploration vessel, Okeanos Explorer, conducted a remotely operated vehicle (ROV) dive on a series of active `black smoker' hydrothermal vents at 3,300 m depth in the western Pacific Ocean near the Mariana Trench. The ROV system traversed 800 m along the seafloor and detected three distinct vent sites. The vent chimneys ranged in heights from 5 m to 30 m above the seafloor and vent fluid temperatures were measured as high as 337 °C. Immediately following the ROV dive, the Okeanos Explorer mapped the vent field with an 18 kHz split-beam echosounder traditionally used for fishery research and a 30 kHz multibeam echosounder with midwater capability. Six passes were made over the field, transiting at 4-5 knots on various headings. There was a clear and repeatable signal in the split-beam echogram from the venting but less obvious indication in the multibeam data. `Black smokers' have traditionally been detected using repeat conductivity-temperature-depth (CTD) `tow-yo' casts. Our field observations suggest an alternative, and potentially more efficient, method of detecting hydrothermal vent plumes within the beamwidth of the split-beam echosounder to inform ROV dive plans. Methods previously applied for locating marine gas seeps on the seafloor with split-beam echosounders can be applied to estimate the hydrothermal vent positions in this dataset and compared to the recorded ROV positions at each site. Additionally, assuming relatively stable venting and ambient conditions, the ROV position and CTD data recorded from the vehicles can be used to better understand the observed midwater acoustic backscatter signatures of the hydrothermal vent plumes.

New Constraints on the Age of the Opening of the South Atlantic Basin As Revealed By Recently Acquired Magnetic, Gravity and Seismic Reflection Data

NASA Astrophysics Data System (ADS)

Hall, S. A.; Bird, D. E.; Danque, H. A.; Grant, J. V.; McLean, D. J.; Towle, P. J.

2014-12-01

Detailed, high quality, marine total field magnetic data has been recently acquired over parts of the South Atlantic ocean off the southwestern margin of South Africa. These data display a pattern of well-defined, NW-SE striking linear magnetic anomalies along the margin that can be traced with confidence over distances > 150 km. The anomalies are interpreted to be M-series seafloor spreading anomalies M9 to M11, which are consistent with the initiation of seafloor spreading around 135 Ma (Late Valanginian). Corresponding M-series anomalies M9 and M10 have previously been reported for the conjugate South American margin offshore Argentina, however the presence of the M11 series SE of the Cape Lineament suggests an earlier opening of the southern South Atlantic basin than previously recognized. Breaks in the continuity of the linear anomaly pattern, observed in map view, have generally NE-SW trends and are considered sites of possible fracture zones. One such discontinuity, which we have termed the "Cape Lineament" (CL), marks a significant change in crustal character and Cretaceous depositional history, as revealed by gravity data and seismic reflection data respectively. Crust NW of CL appears to be characterized by greater thicknesses and the presence of seaward dipping reflectors (SDRs), whereas crust SE of CL has more "normal" oceanic thicknesses and SDRs that are either absent or more limited in areal extent. Although linear magnetic anomalies are observed both NW and SE of CL, anomalies to the SE display a better correlation with those predicted by our seafloor spreading model.

Seafloor change detection using multibeam echosounder backscatter: case study on the Belgian part of the North Sea

NASA Astrophysics Data System (ADS)

Montereale-Gavazzi, Giacomo; Roche, Marc; Lurton, Xavier; Degrendele, Koen; Terseleer, Nathan; Van Lancker, Vera

2018-06-01

To characterize seafloor substrate type, seabed mapping and particularly multibeam echosounding are increasingly used. Yet, the utilisation of repetitive MBES-borne backscatter surveys to monitor the environmental status of the seafloor remains limited. Often methodological frameworks are missing, and should comprise of a suite of change detection procedures, similarly to those developed in the terrestrial sciences. In this study, pre-, ensemble and post-classification approaches were tested on an eight km2 study site within a Habitat Directive Area in the Belgian part of the North Sea. In this area, gravel beds with epifaunal assemblages were observed. Flourishing of the fauna is constrained by overtopping with sand or increased turbidity levels, which could result from anthropogenic activities. Monitoring of the gravel to sand ratio was hence put forward as an indicator of good environmental status. Seven acoustic surveys were undertaken from 2004 to 2015. The methods allowed quantifying temporal trends and patterns of change of the main substrate classes identified in the study area; namely fine to medium homogenous sand, medium sand with bioclastic detritus and medium to coarse sand with gravel. Results indicated that by considering the entire study area and the entire time series, the gravel to sand ratio fluctuated, but was overall stable. Nonetheless, when only the biodiversity hotspots were considered, net losses and a gradual trend, indicative of potential smothering, was captured by ensemble and post-classification approaches respectively. Additionally, a two-dimensional morphological analysis, based on the bathymetric data, suggested a loss of profile complexity from 2004 to 2015. Causal relationships with natural and anthropogenic stressors are yet to be established. The methodologies presented and discussed are repeatable and can be applied to broad-scale geographical extents given that broad-scale time series datasets become available.

Incorporating Density Properties of MgSO4 Brines Into Icy World Ocean Simulations

NASA Astrophysics Data System (ADS)

Goodman, J. C.; Vance, S.

2011-12-01

The structure and flow of the subsurface oceans in icy worlds depends on the sources of buoyancy within these oceans. Buoyancy is determined by the equation of state, in which density is a nonlinear function of temperature, salinity, and pressure. Equations of state for terrestrial seawater (with Na and Cl as the principal dissolved species) are well-developed, but icy world oceans may contain a different balance of species, including Na, Mg, SO4, and NH4 (Kargel et al, 2000). Recent work by Vance and Brown (2011, pers. comm.) has mapped out the density and thermodynamic properties of MgSO4 brines under icy world conditions. We have developed code to incorporate this equation of state data for MgSO4 brines into two different ocean simulation models. First, we investigate a single-column convection model, which is able to find the equilibrium structure and heat transport of an icy world ocean. We explore the heat transport through the ocean subject to a variety of assumptions about ocean salinity and seafloor heat and salt flux. We resolve the paradox posed by Vance and Brown (2004): warm salty MgSO4 brine emitted by a seafloor hydrothermal system may be positively buoyant at the seafloor, but become negatively buoyant (sinking) at lower pressure. How does heat escape the ocean, if it cannot be transported by convection? Second, we add MgSO4 dynamics to a full 3-D time-dependent general circulation model (the MIT GCM), which is able to simulate both the global-scale circulation of the world's ocean and investigate the highly turbulent dynamics of buoyant hydrothermal systems. We ask, "Are buoyancy-driven flows in a MgSO4 brine ocean significantly different than similarly-driven flows in terrestrial seawater?"

Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York

USGS Publications Warehouse

McMullen, Katherine Y.; Poppe, Lawrence J.; Danforth, William W.; Blackwood, Dann S.; Clos, Andrew R.; Parker, Castle E.

2014-01-01

Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

Detailed seamount-scale studies of ferromanganese crusts reveal new insights into their formation and resource assessment.

NASA Astrophysics Data System (ADS)

Murton, B. J.; Lusty, P.; Yeo, I. A.; Howarth, S.

2017-12-01

The seafloor hosts abundant mineral deposits critical for low-carbon economies and emerging technologies. These include ferromanganese crusts (FeMnC) that grow on seamounts. While the broad distribution of FeMnC is known, local controls on growth, composition and formation are not. Here, we describe a detailed study of a gyot in the NE Atlantic (Tropic Seamount) that explores the controls, from the surface to the seafloor, exerted on FeMnC growth from current energy, surface productivity, sediment distribution, seafloor morphology, substrate lithology, sediments mobility and thickness, and seamount subsidence. During cruise JC142 (2016), we mapped the seamount with EM120 multibeam, mapped the 400km2 summit with AUV multibeam, sidescan sonar, sub-bottom profiler and 361,644 photographs. During 28 ROV dives we drilled 58 core and collected 344 individual rock samples. We found FeMnC at all depths, with the thickest (<20cm) located at the greatest depths (3000-4000m). The thinnest are on the summit plateau, with the centre and southern edge having the thickest sediment. FeMnC pavements form many different terraces on the summit. Frequent undercuts expose a calcareous substrate. Elsewhere, cobbles and pebbles form the nucleolus for crusts up to 10cm thick, with growth into the sediment. Many substrates are found to comprise semi-consolidated sediment. The presence of thick crusts at the base of the seamount contradicts accepted understanding of FeMnC deposition just below the oxygen minimum zone (OMZ). In areas on the eastern and western spurs, between 2500m and 1000m, where current energy is greatest, sessile fauna are most abundant. Dense coral debris at these locations appears to inhibit crust formation and coral and sponge `gardens' are frequent on near vertical cliffs. The observation that crusts have grown downwards into and over soft sediment is enigmatic since present understanding requires hard substrates to be exposed to seawater for crusts to grow, and any burial would inhibit such growth. Plume tracking shows reduction to background within 1000m. Our study challenges the view that ferromanganese crusts form at the base of the OMZ and grow upwards on solid substrates. Instead, we see an interplay between crust precipitation, the morphological evolution of the seamount, its hydrography and substrates.

Application of AUVs in the Exploration for and Characterization of Arc Volcano Seafloor Hydrothermal Systems

NASA Astrophysics Data System (ADS)

de Ronde, C. E. J.; Walker, S. L.; Caratori Tontini, F.; Baker, E. T.; Embley, R. W.; Yoerger, D.

2014-12-01

The application of Autonomous Underwater Vehicles (AUVs) in the search for, and characterization of, seafloor hydrothermal systems associated with arc volcanoes has provided important information at a scale relevant to the study of these systems. That is, 1-2 m resolution bathymetric mapping of the seafloor, when combined with high-resolution magnetic and water column measurements, enables the discharge of hydrothermal vent fluids to be coupled with geological and structural features, and inferred upflow zones. Optimum altitude for the AUVs is ~70 m ensuring high resolution coverage of the area, maximum exposure to hydrothermal venting, and efficency of survey. The Brothers caldera and Clark cone volcanoes of the Kermadec arc have been surveyed by ABE and Sentry. At Brothers, bathymetric mapping shows complex features on the caldera walls including embayment's, ridges extending orthogonal to the walls and the location of a dominant ring fault. Water column measurements made by light scattering, temperature, ORP and pH sensors confirmed the location of the known vent fields on the NW caldera wall and atop the two cones, and discovered a new field on the West caldera wall. Evidence for diffuse discharge was also seen on the rim of the NW caldera wall; conversely, there was little evidence for discharge over an inferred ancient vent site on the SE caldera wall. Magnetic measurements show a strong correlation between the boundaries of vent fields determined by water column measurements and observed from manned submersible and towed camera surveys, and donut-shaped zones of magnetic 'lows' that are focused along ring faults. A magnetic low was also observed to cover the SE caldera site. Similar surveys over the NW edifice of Clark volcano also show a strong correlation between active hydrothermal venting and magnetic lows. Here, the survey revealed a pattern resembling Swiss cheese of magnetic lows, indicating more widespread permeability. Moreover, the magnetic survey showed evidence for a highly magnetized ring structure ~350 m below the volcano summit considered to represent a buried (by continued growth of the cone) caldera rim. Zones of magnetic lows located inside the inferred caldera that are not associated with present-day venting are consistent with an earlier stage of hydrothermal activity.

Response to Comment on "Sensitivity of seafloor bathymetry to climate-driven fluctuations in mid-ocean ridge magma supply".

PubMed

Olive, J-A; Behn, M D; Ito, G; Buck, W R; Escartín, J; Howell, S

2016-07-15

Tolstoy reports the existence of a characteristic 100 thousand year (ky) period in the bathymetry of fast-spreading seafloor but does not argue that sea level change is a first-order control on seafloor morphology worldwide. Upon evaluating the overlap between tectonic and Milankovitch periodicities across spreading rates, we reemphasize that fast-spreading ridges are the best potential recorders of a sea level signature in seafloor bathymetry. Copyright © 2016, American Association for the Advancement of Science.

Pulsations, interpulsations, and sea-floor spreading.

NASA Technical Reports Server (NTRS)

Pessagno, E. A., Jr.

1973-01-01

It is postulated that worldwide transgressions (pulsations) and regressions (interpulsations) through the course of geologic time are related to the elevation and subsidence of oceanic ridge systems and to sea-floor spreading. Two multiple working hypotheses are advanced to explain major transgressions and regressions and the elevation and subsidence of oceanic ridge systems. One hypothesis interrelates the sea-floor spreading hypothesis to the hypothesis of sub-Mohorovicic serpentinization. The second hypothesis relates the sea-floor spreading hypothesis to a hypothesis involving thermal expansion and contraction.

K1-95-HW, cruise report 1995: preliminary results. Phase III: sediment chemistry and biological sampling survey

USGS Publications Warehouse

Torresan, M.E.; Hampton, M.A.; Barber, J.H.; Wong, F.L.

1995-01-01

Mamala Bay, off the south shore of the island of Oahu, has been used as a repository of dredged material primarily from Pearl and Honolulu Harbors for over a century. The U.S. Geological Survey, U.S. Army Corps of Engineers, and the U.S. Environmental Protection Agency are conducting an integrated study on the distribution and character of dredged materials as well as the effects of dredged material on the marine environment. A three phase study is providing information to evaluate the effects on seafloor substrate and the benthic fauna. The studies include geophysical profiling and imaging, bottom photography, sampling, chemical and physical analyses of sediment, and evaluations of the benthic population, population density, and adverse impacts to the benthic fauna. Phase 1, conducted in 1993, inventoried the seafloor via remote sensing. Sidescan sonar and subbottom profilers characterized the seafloor in and around the disposal sites, and the resulting products reveal the character and extent of the dredged material. These data were used to plan Phase 2 in 1994, a sampling program that employed subbottom profilers, video and still photography, and seafloor sampling to ground truth the sonar mosaic and identify the seafloor substrates responsible for the various acoustic signatures on the sonar images and subbottom profiles. Box coring provided the samples necessary to distinguish dredged material from native sediment, and for the chemical analyses used to determine contaminant concentrations. Phase 3 studies conducted in June of 1995 consisted of box core sampling for chemical and biological analyses. Specific studies include: infaunal taxonomy and population density, bioassay/bioaccumulation, sediment chemistry, and post-disposal resuspension and transport. The 1995 survey, conducted June 14 through 17, resulted in the collection of 39 box cores from 20 different stations. Multiple box cores were composited at 7 different locations occupied in 1994, to provide the material required for the 7 bioassay and bioaccumulation analyses currently underway (Figure 1). Seventeen of the 20 stations occupied provided the biological samples for the benthic infaunal identification and population density study conducted by Dr. Julie Brock of the University of Hawaii, and the sediment chemistry analyses conducted (and completed) by Quanterra Environmental Laboratories (Figure 1). Seven of the 20 stations occupied in 1995 were occupied in 1994, and provide the data for direct comparison of sediment chemistry at the same sites from two consecutive years. The sum total of the data collected from all three phases of the monitoring program will provide the U.S. Army Corps of Engineers and the U.S. Environmental Protection Agency with the information required to make informed decisions as to the management of the South Oahu disposal site in Mamala Bay.

Seafloor identification in sonar imagery via simulations of Helmholtz equations and discrete optimization

NASA Astrophysics Data System (ADS)

Engquist, Björn; Frederick, Christina; Huynh, Quyen; Zhou, Haomin

2017-06-01

We present a multiscale approach for identifying features in ocean beds by solving inverse problems in high frequency seafloor acoustics. The setting is based on Sound Navigation And Ranging (SONAR) imaging used in scientific, commercial, and military applications. The forward model incorporates multiscale simulations, by coupling Helmholtz equations and geometrical optics for a wide range of spatial scales in the seafloor geometry. This allows for detailed recovery of seafloor parameters including material type. Simulated backscattered data is generated using numerical microlocal analysis techniques. In order to lower the computational cost of the large-scale simulations in the inversion process, we take advantage of a pre-computed library of representative acoustic responses from various seafloor parameterizations.

Mapping of rock types using a joint approach by combining the multivariate statistics, self-organizing map and Bayesian neural networks: an example from IODP 323 site

NASA Astrophysics Data System (ADS)

Karmakar, Mampi; Maiti, Saumen; Singh, Amrita; Ojha, Maheswar; Maity, Bhabani Sankar

2017-07-01

Modeling and classification of the subsurface lithology is very important to understand the evolution of the earth system. However, precise classification and mapping of lithology using a single framework are difficult due to the complexity and the nonlinearity of the problem driven by limited core sample information. Here, we implement a joint approach by combining the unsupervised and the supervised methods in a single framework for better classification and mapping of rock types. In the unsupervised method, we use the principal component analysis (PCA), K-means cluster analysis (K-means), dendrogram analysis, Fuzzy C-means (FCM) cluster analysis and self-organizing map (SOM). In the supervised method, we use the Bayesian neural networks (BNN) optimized by the Hybrid Monte Carlo (HMC) (BNN-HMC) and the scaled conjugate gradient (SCG) (BNN-SCG) techniques. We use P-wave velocity, density, neutron porosity, resistivity and gamma ray logs of the well U1343E of the Integrated Ocean Drilling Program (IODP) Expedition 323 in the Bering Sea slope region. While the SOM algorithm allows us to visualize the clustering results in spatial domain, the combined classification schemes (supervised and unsupervised) uncover the different patterns of lithology such of as clayey-silt, diatom-silt and silty-clay from an un-cored section of the drilled hole. In addition, the BNN approach is capable of estimating uncertainty in the predictive modeling of three types of rocks over the entire lithology section at site U1343. Alternate succession of clayey-silt, diatom-silt and silty-clay may be representative of crustal inhomogeneity in general and thus could be a basis for detail study related to the productivity of methane gas in the oceans worldwide. Moreover, at the 530 m depth down below seafloor (DSF), the transition from Pliocene to Pleistocene could be linked to lithological alternation between the clayey-silt and the diatom-silt. The present results could provide the basis for the detailed study to get deeper insight into the Bering Sea' sediment deposition and sequence.

On-line Geoscience Data Resources for Today's Undergraduates

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.; Ryan, W.; Carbotte, S.; Melkonian, A.; Coplan, J.; Arko, R.; O'Hara, S.; Ferrini, V.; Leung, A.; Bonckzowski, J.

2008-12-01

Broadening the experience of undergraduates can be achieved by enabling free, unrestricted and convenient access to real scientific data. With funding from the U.S. National Science Foundation, the Marine Geoscience Data System (MGDS) (http://www.marine-geo.org/) serves as the integrated data portal for various NSF-funded projects and provides free public access and preservation to a wide variety of marine and terrestrial data including rock, fluid, biology and sediment samples information, underway geophysical data and multibeam bathymetry, water column and multi-channel seismics data. Users can easily view the locations of cruise tracks, sample and station locations against a backdrop of a multi-resolution global digital elevation model. A Search For Data web page rapidly extracts data holdings from the database and can be filtered on data and device type, field program ID, investigator name, geographical and date bounds. The data access experience is boosted by the MGDS use of standardised OGC-compliant Web Services to support uniform programmatic interfaces. GeoMapApp (http://www.geomapapp.org/), a free MGDS data visualization tool, supports map-based dynamic exploration of a broad suite of geosciences data. Built-in land and marine data sets include tectonic plate boundary compilations, DSDP/ODP core logs, earthquake events, seafloor photos, and submersible dive tracks. Seamless links take users to data held by external partner repositories including PetDB, UNAVCO, IRIS and NGDC. Users can generate custom maps and grids and import their own data sets and grids. A set of short, video-style on-line tutorials familiarises users step- by-step with GeoMapApp functionality (http://www.geomapapp.org/tutorials/). Virtual Ocean (http://www.virtualocean.org/) combines the functionality of GeoMapApp with a 3-D earth browser built using the NASA WorldWind API for a powerful new data resource. MGDS education involvement (http://www.marine-geo.org/, go to Education tab) includes the searchable Media Bank of images and video; KML files for viewing several MGDS data sets in Google Earth (tm); support in developing undergraduate- level teaching modules using NSF-MARGINS data. Examples of many of these data sets will be shown.

Ultrahigh-Resolution 3-Dimensional Seismic Imaging of Seeps from the Continental Slope of the Northern Gulf of Mexico: Subsurface, Seafloor and Into the Water Column

NASA Astrophysics Data System (ADS)

Brookshire, B. N., Jr.; Mattox, B. A.; Parish, A. E.; Burks, A. G.

2016-02-01

Utilizing recently advanced ultrahigh-resolution 3-dimensional (UHR3D) seismic tools we have imaged the seafloor geomorphology and associated subsurface aspects of seep related expulsion features along the continental slope of the northern Gulf of Mexico with unprecedented clarity and continuity. Over an area of approximately 400 km2, over 50 discrete features were identified and three general seafloor geomorphologies indicative of seep activity including mounds, depressions and bathymetrically complex features were quantitatively characterized. Moreover, areas of high seafloor reflectivity indicative of mineralization and areas of coherent seismic amplitude anomalies in the near-seafloor water column indicative of active gas expulsion were identified. In association with these features, shallow source gas accumulations and migration pathways based on salt related stratigraphic uplift and faulting were imaged. Shallow, bottom simulating reflectors (BSRs) interpreted to be free gas trapped under near seafloor gas hydrate accumulations were very clearly imaged.

Interplate locking derived from seafloor geodetic measurement at the shallow subduction zone of the northernmost Suruga Trough, Japan

NASA Astrophysics Data System (ADS)

Yasuda, K.; Tadokoro, K.; Ikuta, R.; Watanabe, T.; Nagai, S.; Sayanagi, K.

2013-12-01

Observation of seafloor crustal deformation is crucial for megathrust earthquake because most of the focal areas are located below seafloor. Seafloor crustal deformation can be observed GPS/Acoustic technique, and this technique has been carried out at subduction margins in Japan, e.g., Japan Trench, Suruga Trough, and Nankai Trough. At the present, the accuracy of seafloor positioning is one to several centimeters for each epoch. Velocity vectors at seafloor site are estimated through repeated observations. Co- and post- seismic slip distribution and interseismic deformation are estimated from results of seafloor geodetic measurement (e.g., Iinuma et al., 2012; Tadokoro et al., 2012). We repeatedly observed seafloor crustal deformations at two sites across the Suruga Trough from 2005 to investigate interplate locking condition at the focal area of the anticipated megathrust, Tokai, earthquake. We observed 12 and 16 times at an east site of the Suruga Trough (SNE) and at an west site of the Suruga Trough (SNW), respectively. We reinstalled seafloor benchmarks at both sites because of run out of batteries in 2012. We calculated and removed the bias between the old and new seafloor benchmarks. Furthermore, we evaluated two type of analysis. One is Fixed triangular configuration Analysis (FTA). When we determine the seafloor benchmark position, we fix the triangular configuration of seafloor units averaging all the measurements to improve trade-off relation between seafloor benchmark position and sound speed structure. Sound speed structure is assumed to be horizontal layered structure. The other one is Fixed Triangle and Gradient structure of sound speed structure (FTGA). We fixed triangular configuration same as FTA. Sound speed structure is assumed to have gradient structure. Comparing FTA with FTGA, the RMS of horizontal position analyzed through FTA is smaller than that through FTGA at SNE site. On the other hand, the RMS of horizontal position analyzed through FTA is larger than that through FTGA at SNW site. We estimated the displacement velocities with relative to the Amurian plate from the result of repeated observation. The estimated displacement velocity vectors at SNE and SNW are 42×8 mm/y to N94W direction and 46×13 mm/y to N77W direction, respectively. The directions are the same as those measured at the on-land GPS stations. The magnitudes of velocity vector indicate significant shortening by approximately 11 mm/y between SNW and on-land GPS stations at the western part of the Suruga Trough. We also calculated the theoretical surface deformation pattern to depict the interplate locking condition. These results show that the plate interface at the shallow zone of the northernmost Suruga trough is strongly locked.

Cartographic production for the Florida Shelf Habitat (FLaSH) map study: generation of surface grids, contours, and KMZ files

USGS Publications Warehouse

Robbins, Lisa L.; Hansen, Mark; Raabe, Ellen; Knorr, Paul O.; Browne, Joseph

2007-01-01

The Florida shelf represents a finite source of economic resources, including commercial and recreational fisheries, tourism, recreation, sand and gravel resources, phosphate, and freshwater reserves. Yet the basic information needed to locate resources, or to interpret and utilize existing data, comes from many sources, dates, and formats. A multi-agency effort is underway to coordinate and prioritize the compilation of suitable datasets for an integrated information system of Florida’s coastal and ocean resources. This report and the associated data files represent part of the effort to make data accessible and useable with computer-mapping systems, web-based technologies, and user-friendly visualization tools. Among the datasets compiled and developed are seafloor imagery, marine sediment data, and existing bathymetric data. A U.S. Geological Survey-sponsored workshop in January 2007 resulted in the establishment of mapping priorities for the state. Bathymetry was identified as a common priority among agencies and researchers. State-of-the-art computer-mapping techniques and data-processing tools were used to develop shelf-wide raster and vector data layers. Florida Shelf Habitat (FLaSH) Mapping Project (http://coastal.er.usgs.gov/flash) endeavors to locate available data, identify data gaps, synthesize existing information, and expand our understanding of geologic processes in our dynamic coastal and marine systems.

Supervised classification of continental shelf sediment off western Donegal, Ireland

NASA Astrophysics Data System (ADS)

Monteys, X.; Craven, K.; McCarron, S. G.

2017-12-01

Managing human impacts on marine ecosystems requires natural regions to be identified and mapped over a range of hierarchically nested scales. In recent years (2000-present) the Irish National Seabed Survey (INSS) and Integrated Mapping for the Sustainable Development of Ireland's Marine Resources programme (INFOMAR) (Geological Survey Ireland and Marine Institute collaborations) has provided unprecedented quantities of high quality data on Ireland's offshore territories. The increasing availability of large, detailed digital representations of these environments requires the application of objective and quantitative analyses. This study presents results of a new approach for sea floor sediment mapping based on an integrated analysis of INFOMAR multibeam bathymetric data (including the derivatives of slope and relative position), backscatter data (including derivatives of angular response analysis) and sediment groundtruthing over the continental shelf, west of Donegal. It applies a Geographic-Object-Based Image Analysis software package to provide a supervised classification of the surface sediment. This approach can provide a statistically robust, high resolution classification of the seafloor. Initial results display a differentiation of sediment classes and a reduction in artefacts from previously applied methodologies. These results indicate a methodology that could be used during physical habitat mapping and classification of marine environments.

Cold-seep habitat mapping: High-resolution spatial characterization of the Blake Ridge Diapir seep field

NASA Astrophysics Data System (ADS)

Wagner, Jamie K. S.; McEntee, Molly H.; Brothers, Laura L.; German, Christopher R.; Kaiser, Carl L.; Yoerger, Dana R.; Van Dover, Cindy Lee

2013-08-01

Relationships among seep community biomass, diversity, and physiographic controls such as underlying geology are not well understood. Previous efforts to constrain these relationships at the Blake Ridge Diapir were limited to observations from piloted deep-submergence vehicles. In August 2012, the autonomous underwater vehicle (AUV) Sentry collected geophysical and photographic data over a 0.131 km2 area at the Blake Ridge Diapir seeps. A nested survey approach was used that began with a regional or reconnaissance-style survey using sub-bottom mapping systems to locate and identify seeps and underlying conduits. This survey was followed by AUV-mounted sidescan sonar and multibeam echosounder systems mapping on a mesoscale to characterize the seabed physiography. At the most detailed survey level, digital photographic imaging was used to resolve sub-meter characteristics of the biology. Four pockmarks (25-70 m diameter) were documented, each supporting chemosynthetic communities. Concentric zonation of mussels and clams suggests the influence of chemical gradients on megafaunal distribution. Data collection and analytical techniques used here yield high-resolution habitat maps that can serve as baselines to constrain temporal evolution of seafloor seeps, and to inform ecological niche modeling and resource management.

Cold-seep habitat mapping: high-resolution spatial characterization of the Blake Ridge Diapir seep field

USGS Publications Warehouse

Wagner, Jamie K.S.; McEntee, Molly H.; Brothers, Laura L.; German, Christopher R.; Kaiser, Carl L.; Yoerger, Dana R.; Van Dover, Cindy Lee

2013-01-01

Relationships among seep community biomass, diversity, and physiographic controls such as underlying geology are not well understood. Previous efforts to constrain these relationships at the Blake Ridge Diapir were limited to observations from piloted deep-submergence vehicles. In August 2012, the autonomous underwater vehicle (AUV) Sentry collected geophysical and photographic data over a 0.131 km2 area at the Blake Ridge Diapir seeps. A nested survey approach was used that began with a regional or reconnaissance-style survey using sub-bottom mapping systems to locate and identify seeps and underlying conduits. This survey was followed by AUV-mounted sidescan sonar and multibeam echosounder systems mapping on a mesoscale to characterize the seabed physiography. At the most detailed survey level, digital photographic imaging was used to resolve sub-meter characteristics of the biology. Four pockmarks (25–70 m diameter) were documented, each supporting chemosynthetic communities. Concentric zonation of mussels and clams suggests the influence of chemical gradients on megafaunal distribution. Data collection and analytical techniques used here yield high-resolution habitat maps that can serve as baselines to constrain temporal evolution of seafloor seeps, and to inform ecological niche modeling and resource management.

Seafloor geomorphic manifestations of gas venting and shallow subbottom gas hydrate occurrences

USGS Publications Warehouse

Paull, C K; Caress, D W; Thomas, Hans; Lundsten, Eve M.; Anderson, Kayce; Gwiazda, Roberto; Riedel, M; McGann, Mary; Herguera, J C

2015-01-01

High-resolution multibeam bathymetry data collected with an autonomous underwater vehicle (AUV) complemented by compressed high-intensity radar pulse (Chirp) profiles and remotely operated vehicle (ROV) observations and sediment sampling reveal a distinctive rough topography associated with seafloor gas venting and/or near-subsurface gas hydrate accumulations. The surveys provide 1 m bathymetric grids of deep-water gas venting sites along the best-known gas venting areas along the Pacific margin of North America, which is an unprecedented level of resolution. Patches of conspicuously rough seafloor that are tens of meters to hundreds of meters across and occur on larger seafloor topographic highs characterize seepage areas. Some patches are composed of multiple depressions that range from 1 to 100 m in diameter and are commonly up to 10 m deeper than the adjacent seafloor. Elevated mounds with relief of >10 m and fractured surfaces suggest that seafloor expansion also occurs. Ground truth observations show that these areas contain broken pavements of methane-derived authigenic carbonates with intervening topographic lows. Patterns seen in Chirp profiles, ROV observations, and core data suggest that the rough topography is produced by a combination of diagenetic alteration, focused erosion, and inflation of the seafloor. This characteristic texture allows previously unknown gas venting areas to be identified within these surveys. A conceptual model for the evolution of these features suggests that these morphologies develop slowly over protracted periods of slow seepage and shows the impact of gas venting and gas hydrate development on the seafloor morphology.

SubductionGenerator: A program to build three-dimensional plate configurations

NASA Astrophysics Data System (ADS)

Jadamec, M. A.; Kreylos, O.; Billen, M. I.; Turcotte, D. L.; Knepley, M.

2016-12-01

Geologic, geochemical, and geophysical data from subduction zones indicate that a two-dimensional paradigm for plate tectonic boundaries is no longer adequate to explain the observations. Many open source software packages exist to simulate the viscous flow of the Earth, such as the dynamics of subduction. However, there are few open source programs that generate the three-dimensional model input. We present an open source software program, SubductionGenerator, that constructs the three-dimensional initial thermal structure and plate boundary structure. A 3D model mesh and tectonic configuration are constructed based on a user specified model domain, slab surface, seafloor age grid file, and shear zone surface. The initial 3D thermal structure for the plates and mantle within the model domain is then constructed using a series of libraries within the code that use a half-space cooling model, plate cooling model, and smoothing functions. The code maps the initial 3D thermal structure and the 3D plate interface onto the mesh nodes using a series of libraries including a k-d tree to increase efficiency. In this way, complicated geometries and multiple plates with variable thickness can be built onto a multi-resolution finite element mesh with a 3D thermal structure and 3D isotropic shear zones oriented at any angle with respect to the grid. SubductionGenerator is aimed at model set-ups more representative of the earth, which can be particularly challenging to construct. Examples include subduction zones where the physical attributes vary in space, such as slab dip and temperature, and overriding plate temperature and thickness. Thus, the program can been used to construct initial tectonic configurations for triple junctions and plate boundary corners.

The Importance of Chemosynthetic Communities and 'Seep-Hunting' to Deepwater Oil and Gas Exploration

NASA Astrophysics Data System (ADS)

McConnell, D.; Gharib, J. J.; Orange, D.; Henderson, J.; Danque, H.; Digby, A.

2007-12-01

Seafloor surveying techniques have often evolved as the industry's needs have evolved. Oil and gas exploration costs have escalated over the last several years, both as a result of increasing offshore overhead costs as well as the increased demand being met by offshore service-related companies. Consequently, more companies are prospecting using inexpensive techniques that rely on scientific expertise, such as seep-hunting, as a means of identifying reservoirs, and the past few years have seen several large-scale industrial deepwater surveys with locating hydrocarbon seeps as a primary goal. The identification of seeps is also a necessity for many pre-drilling operations, as many potential developers must conform to local regulations protecting chemosynthetic communities (eg MMS NTL 2000-G20 for Gulf of Mexico development). In addition to identifying chemosynthetic communities for permitting issues, as prospecting has moved into deeper water the ability to identify seep-related drilling hazards, such as hardgrounds or shallow gas (and hydrates) has also increased in importance. The specialized field of identifying seeps, and related chemosynthetics, hardgrounds, etc., is rapidly growing, aided by advances in mapping technology, such as multibeam backscatter and interferometry, among others. Today all of the geophysical data can be brought into a common interpretation environment providing multiple perspectives, different data overlays, and/or 3D visualizations. Using these techniques, high resolution multibeam and/or side-scan surveys rapidly cover large swaths of seafloor and identify potential seeps in real- time. These targets can then be examined geochemically with a coring program, potentially working simultaneously with the multibeam program. Modern USBL navigation can position a deepwater core in <10m diameter targets. Much of the geochemistry can be analyzed in near-real time at sea (eg headspace/interstitial gas, trace/minor/major ions in porefluids, etc; only isotopic analyses are restricted to better equipped research vessels). The advantages of integrating these data are considerable, and they can be obtained for a fraction of the cost of exploratory drilling or submersible operations. This presentation intends to outline the recent history of the industry's approach to seep-hunting, its increasing importance to oil prospectivity, and future trends in industrial applications and how this might affect academic study in this field (especially related to the advances in seep-hunting technology and software that are becoming industry-standards).

Virtual Vents: A Microbathymetrical Survey of the Niua South Hydrothermal Field, NE Lau Basin, Tonga

NASA Astrophysics Data System (ADS)

Kwasnitschka, T.; Köser, K.; Duda, A.; Jamieson, J. W.; Boschen, R.; Gartman, A.; Hannington, M. D.; Funganitao, C.

2016-12-01

At a diameter of 200 m, the 1100 m deep Niua South hydrothermal field (NE Lau Basin) was studied in an interdisciplinary approach during the SOI funded Virtual Vents cruise in March of 2016. On the grounds of a previously generated 50 cm resolution AUV multi beam map, the projects backbone is formed by a fully color textured, 5 cm resolution photogrammetrical 3D model. Several hundred smaller and about 15 chimneys larger than 3 m were surveyed including their basal mounds and surrounding environment interconnecting to each other. This model was populated through exhaustive geological, biological and fluid sampling as well as continuous Eh measurements, forming the basis for highly detailed geological structural and biological studies resulting in 3D maps of the entire field. At a reasonable effort, such surveys form the basis for repetitive time series analysis and have the potential of a new standard in seafloor monitoring.

Environmental siting suitability analysis for commercial scale ocean renewable energy: A southeast Florida case study

NASA Astrophysics Data System (ADS)

Mulcan, Amanda

This thesis aims to facilitate the siting and implementation of Florida Atlantic University Southeast National Marine Renewable Energy Center (FAU SNMREC) ocean current energy (OCE) projects offshore southeastern Florida through the analysis of benthic anchoring conditions. Specifically, a suitability analysis considering all presently available biologic and geologic datasets within the legal framework of OCE policy and regulation was done. OCE related literature sources were consulted to assign suitability levels to each dataset, ArcGIS interpolations generated seafloor substrate maps, and existing submarine cable pathways were considered for OCE power cables. The finalized suitability map highlights the eastern study area as most suitable for OCE siting due to its abundance of sand/sediment substrate, existing underwater cable route access, and minimal biologic presence. Higher resolution datasets are necessary to locate specific OCE development locales, better understand their benthic conditions, and minimize potentially negative OCE environmental impacts.

California State Waters map series—Offshore of Scott Creek, California

USGS Publications Warehouse

Cochrane, Guy R.; Dartnell, Peter; Johnson, Samuel Y.; Greene, H. Gary; Erdey, Mercedes D.; Dieter, Bryan E.; Golden, Nadine E.; Endris, Charles A.; Hartwell, Stephen R.; Kvitek, Rikk G.; Davenport, Clifton W.; Watt, Janet T.; Krigsman, Lisa M.; Ritchie, Andrew C.; Sliter, Ray W.; Finlayson, David P.; Maier, Katherine L.; Cochrane, Guy R.; Cochran, Susan A.

2015-11-16

Seafloor habitats in the Offshore of Scott Creek map area, which lie within the Shelf (continental shelf) megahabitat, range from significant rocky outcrops that support kelp-forest communities nearshore to rocky-reef communities in deeper water. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. The kelp beds are the northernmost known habitat for the population of southern sea otters. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

An Interdisciplinary Exploration of the Mariana Region with the NOAA ship Okeanos Explorer: Scientific Highlights from the April-July 2016 Expedition

NASA Astrophysics Data System (ADS)

Glickson, D.; Amon, D.; Pomponi, S. A.; Fryer, P. B.; Elliott, K.; Lobecker, E.; Cantwell, K. L.; Kelley, C.

2016-12-01

From April to July 2016, an interdisciplinary team of ship-based and shore-based scientists investigated the biology and geology of the Marianas region as part of the 3-year NOAA Campaign to Address the Pacific monument Science, Technology, and Ocean NEeds (CAPSTONE) using the telepresence-enabled NOAA ship Okeanos Explorer. The focus of the expedition was on the Marianas Trench Marine National Monument and the waters of the Commonwealth of the Northern Mariana Islands. A variety of habitats were explored, including deep-sea coral and sponge communities, bottom fisheries, mud volcanoes, hydrothermal vents, Prime Crust Zone seamounts, and the Trench subduction zone. The expedition successfully collected baseline information at 41 sites at depths from 240 to 6,000 m. High-resolution imagery was obtained along the dive tracks, both in the water column and on the seafloor. Over 130 biological and geologic samples were collected. Many of the organisms documented are likely to be new species or new records of occurrence, and dozens of observations were the first ever collected in situ. Almost 74,000 square kilometers of seafloor were mapped, greatly improving both coverage and resolution in the region. New geologic features were mapped and explored, including ridges and new lava flow fields. Public engagement was substantial, with over 3.1 million total views of the live streaming video/audio feeds. The telepresence paradigm was tested rigorously, with active participation from 100 scientists in five countries and at least nine time zones. The shore-based team provided strong scientific expertise, complementing and expanding the knowledge of the ship-based science leads.

Seafloor Characteristics and Bathymetric Change at Hunga Tonga-Hunga Ha'apai

NASA Astrophysics Data System (ADS)

Ferrini, V. L.; Spierer, H.; Peters, C.; Garvin, J. B.

2016-12-01

In April 2016, bathymetric mapping was conducted around the new island that formed in 2015 during a surtseyan style eruption at Hunga Tonga-Hunga Ha'apai in the Kingdom of Tonga. The new ship-based bathymetry and acoustic backscatter intensity data can be used to quantify morphologic details of the seafloor surrounding the new land. The new island, which stands 150m above sea level is nestled between two pre-existing islands located on the northern rim of the caldera of a large submarine volcano. The new bathymetry data reveal several cratered domes along the western and southern rims of the caldera, as well as what appear to be large consolidated blocks along the northwest rim of the caldera. In addition, an incised channel extends seaward from very close to the northern coast of new island and suggests a primary pathway for downslope movement during the formation of the island. The floor of the caldera is extremely flat at a water depth of -150 m. Pre-eruption bathymetric data were acquired along two survey lines during transits of a cruise in 2008. The spatial extent of these data is unfortunately limited but they allow quantitative bathymetric differencing over portions of the area mapped in 2016. Bathymetric change of as much as +35 m since 2008 is associated with volcanic domes along the western rim of the caldera. Smaller bathymetric changes are associated with the apparent downslope movement of consolidated blocks on the northwestern rim of the caldera. These data provide important clues about the submarine processes that took place during the eruption and complement ongoing studies of the subaerial portion of the island.

Seafloor in the Expanded Malaysia Airlines Flight MH370 Search Area

NASA Astrophysics Data System (ADS)

Smith, W. H. F.; Marks, K. M.; Beaman, R. J.

2014-12-01

Smith and Marks (Eos Trans. AGU, 95(21), 27 May 2014) illustrated a map of the seafloor in the Malaysia Airlines Flight MH370 search area. This map showed a bathymetric model that is constructed from a combination of available ship soundings and depths estimated from satellite altimetry. They noted that available depth measurements covered only 5% of their study region, and that very few of these measurements were collected using modern multibeam and navigation systems. Recently the MH370 search has been expanded along the "7th Arc" to encompass newly prioritized underwater search areas identified in an Australian Transport Safety Bureau report (AE-2014-054, 26 June 2014). While the new "Priority" search area is within the Eos article Fig. 1, the new "Wide" search area extends beyond the region evaluated in Eos. Additionally, multibeam data that were not incorporated in the bathymetric model have been made available to us after the Eos article was published. This presentation will update and extend the study published in Eos. We will present illustrations of the expanded region, sounding coverage, and tectonic features that are associated with steep topographic slopes. Our results include comparisons of multibeam survey depths and bathymetric model depths. The standard deviation of the differences is 182 m, with the greatest differences (exceeding 1000 m) over steep topographic slopes, and the smallest over low-relief ocean floor. This is consistent with differences found by Smith and Sandwell (JGR, 99(B11), 1994) between soundings and bathymetric predictions from altimetry. Such depth differences are common where bathymetric model constraints are sparse, which is typical of many of the world's oceans.

Advancing an In situ Laser Spectrometer for Carbon Isotope Analyses in the Deep Ocean

NASA Astrophysics Data System (ADS)

Michel, A.; Wankel, S. D.; Kapit, J.; Girguis, P. R.

2016-02-01

Development of in situ chemical sensors is critical for improving our understanding of deep-ocean biogeochemistry and recent advances in chemical sensors are already expanding the breadth and depth of deep sea/seafloor exploration and research. Although initially developed for high sensitivity measurements of atmospheric gases, laser-based spectroscopic sensors are now being developed for research in the deep sea by incorporating the use of semi-permeable membranes. Here we present on recent deep-sea deployments of an in situ laser-based analyzer of carbon isotopes of methane (δ13CH4), highlighting several advances including a new capability for also measuring δ13C of DIC or CO2 by incorporating a second laser and an in line acidification module. A bubble trapping approach was designed and implemented for the collection and analysis of both CH4 and CO2 from deep-sea bubbles. The newly advanced laser spectrometer was deployed at both Kick `Em Jenny volcano off of the island of Grenada and in a brine pool in the western Gulf of Mexico ("The Jacuzzi of Despair") using the E/V Nautilus and the ROV Hercules. At Kick `Em Jenny, seafloor measurements were made of both emanating fluids and bubbles from within and around the crater - revealing high levels of magmatic CO2 with minor amounts of CH4 and hydrogen sulfide. At the brine pool, spot measurements and depth profile measurements into the brine pool were made for chemical mapping, revealing fluids that were saturated with respect to methane. New technologies such as the laser spectrometer will enable us to obtain high resolution and near real-time, in situ chemical and isotopic data and to make geochemical maps over a range of spatial and temporal scales.

Mud Volcanism in a Canyon: Morphodynamic Evolution of the Active Venere Mud Volcano and Its Interplay With Squillace Canyon, Central Mediterranean

NASA Astrophysics Data System (ADS)

Loher, Markus; Ceramicola, Silvia; Wintersteller, Paul; Meinecke, Gerrit; Sahling, Heiko; Bohrmann, Gerhard

2018-02-01

Submarine mud volcanoes develop through the extrusion of methane-rich fluids and sediments onto the seafloor. The morphology of a mud volcano can record its extrusive history and processes of erosion and deformation affecting it. The study of offshore mud volcano dynamics is limited because only few have been mapped at resolutions that reveal their detailed surface structures. More importantly, rates and volumes of extruded sediment and methane are poorly constrained. The 100 m high twin cones of Venere mud volcano are situated at ˜1,600 m water depth within Squillace Canyon along the Ionian Calabrian margin, Mediterranean Sea. Seafloor bathymetry and backscatter data obtained by a ship-based system and an autonomous underwater vehicle (AUV) allow mapping of mudflow deposits of the mud volcano and bedforms in the surrounding canyon. Repeated surveying by AUV document active mud movement at the western summit in between 2014 and 2016. Through sediment coring and tephrochronology, ages of buried mudflow deposits are determined based on the sedimentation rate and the thickness of overlying hemipelagic sediments. An average extrusion rate of 27,000 m3/yr over the last ˜882 years is estimated. These results support a three-stage evolutionary model of Venere mud volcano since ˜4,000 years ago. It includes the onset of quiescence at the eastern cone (after ˜2,200 years ago), erosive events in Squillace Canyon (prior to ˜882 years ago), and mudflows from the eastern cone (since ˜882 years). This study reveals new interactions between a mud volcano and a canyon in the deep sea.

Mapping beneath the seafloor: AUV sub-bottom profilers, sediment thickness and resource potential

NASA Astrophysics Data System (ADS)

Yeo, I. A.; Vardy, M. E.; Holwell, D.; North, L.; Murton, B. J.

2017-12-01

Most AUV seafloor exploration focuses primarily on collecting high-resolution bathymetric and backscatter data in order to identify and map features of interest. Sub-bottom profiler data provides an essential third dimension that can illuminate not only the thickness of overlying sediment packets, but also the scale and tectonic setting of surface features. In this study we present results of high-resolution sub-bottom profiler surveys of Tropic Seamount, a 3000m tall, 40km wide, flat-topped gyot located 400km south of the Canary Islands. We show how the application of AUV derived sub-bottom profiler data can be used to assess the thickness and extent of ferromanganese crusts covering the summit and underlying thin pelagic sediment cover. Bespoke chirp signals at two altitudes were used to increase the likelihood of resolving thin (tens of cm) layers of crust. Drill cores were obtained from an ROV and used to constrain and calibrate the profiler data. The cores show variable crustal thicknesses of zero to 14 cm of FeMn crustal cover over a partially phosphoritised, vuggy, often poorly lithified limestone basement. Initial measurements of sound velocities suggest differences between the limestone basement and the crust of only a few hundred meters per second. Sub-cores, drilled from large samples collected during the cruise were analysed in the NOC Acoustic Pulse Tube and with X-Ray Computer Tomography to better understand how variations in lithology, crustal thickness, surface texture and internal structure affect the returning geoacoustic signal. We discuss the pros and cons of different surveying patterns, altitudes and chirps, the relative usefulness of sub-bottom profiler data in different environments, and the value added by sub-bottom profiler surveying as opposed to bathymetric surveying alone.

Exploring Pacific Seamounts through Telepresence Mapping on the NOAA Ship Okeanos Explorer

NASA Astrophysics Data System (ADS)

Lobecker, E.; Malik, M.; Sowers, D.; Kennedy, B. R.

2016-12-01

Telepresence utilizes modern computer networks and a high bandwidth satellite connection to enable remote users to participate virtually in ocean research and exploration cruises. NOAA's Office of Ocean Exploration and Research (OER) has been leveraging telepresence capabilities since the early 2000s. Through telepresence, remote users have provided support for operations planning and execution, troubleshooting hardware and software, and data interpretation during exploratory ocean mapping and remotely operated vehicle missions conducted by OER. The potential for this technology's application to immersive data acquisition and processing during mapping missions, however, has not yet been fully realized. We report the results of the application of telepresence to an 18-day 24 hour / day seafloor mapping expedition with the NOAA Ship Okeanos Explorer. The mapping team was split between shipboard and shore-based mission team members based at the Exploration Command Center at the University of New Hampshire. This cruise represented the third dedicated mapping cruise in a multi-year NOAA Campaign to Address the Pacific monument Science, Technology, and Ocean Needs (CAPSTONE). Cruise objectives included mapping several previously unmapped seamounts in the Wake Atoll Unit of the recently expanded Pacific Remote Islands Marine National Monument, and mapping of prominent seamount, ridge, and fracture zone features during transits. We discuss (1) expanded shore-based data processing of multiple sonar data streams leading to enhanced, rapid, initial site characterization, (2) remote access control of shipboard sonar data acquisition and processing computers, and (3) potential for broadening multidisciplinary applications of ocean mapping cruises including outreach, education, and communications efforts focused on expanding societal cognition and benefits of ocean exploration.

Seasonal seafloor oxygen dynamics on the Romanian Black Sea Shelf

NASA Astrophysics Data System (ADS)

Friedrich, Jana; Balan, Sorin; van Beusekom, Justus E.; Naderipour, Celine; Secrieru, Dan

2017-04-01

The Black Sea suffers from the combined effects of anthropogenic eutrophication, overfishing and climate forcing. As a result, its broad and shallow western shelf in particular has a history of ecosystem collapse during the 1970s to the mid-1990s, which followed a slow recovery since the late 1990s due to reduction in anthropogenic pressures. Because of eutrophication, increased oxygen consumption caused recurrent widespread seasonal seafloor hypoxia in a system that is already naturally prone to decrease in bottom water oxygen during summer. On the shelf, reduced bottom water ventilation is a strong natural driver for seafloor hypoxia, due to strong seasonal thermohaline stratification as a result of freshwater inflow from the large rivers Danube, Dniester and Dniepro. To understand the present seasonal dynamics of seafloor oxygen on the Romanian shelf, a seafloor mooring was deployed in 2010 and 2016 during summer and autumn, for three and six months, respectively. The mooring, consisting of an Aanderaa SEAGUARD sensor package attached to an acoustic release, was deployed in 30 m water depth in the Portita region - north of Constanta and south of the Danube River Mouths. The in-situ time series of seafloor oxygen, temperature, turbidity, salinity, and current velocities and directions, combined with CTD profiles, benthic oxygen consumption rates based on ex-situ incubations of sediment cores, and pelagic oxygen respiration rates provide a set of information that allows biological and hydrophysical controls on seafloor oxygen to be identified. We observed the built-up of the thermohaline stratification during late spring and early summer, accompanied by steady decrease in bottom water oxygen. Superimposed settling of particles to the seafloor eventually led to the formation of seafloor hypoxia in late summer. Anticyclonic currents resemble diurnal tidal cycles, albeit low in magnitude. The effects of a strong rainstorm and a Danube flood event in late September were visible in a short-term increase in bottom water oxygen. The autumn storm events over the Black Sea led to seafloor ventilation and stepwise increase of bottom water oxygen on the shelf, which continues during the stormy winter season.

An Autonomous, Low Cost Platform for Seafloor Geodetic Observations

NASA Astrophysics Data System (ADS)

Ericksen, T.; Foster, J. H.; Bingham, B. S.; Oshiro, J.

2015-12-01

The Pacific GPS Facility and the Field Robotics Laboratory at the University of Hawaii have developed an approach to significantly reduce the costs of accurately measuring short-term vertical motions of the seafloor and maintaining a continuous long-term record of seafloor pressure. Traditional ship-based methods of acquiring these measurements are often prohibitively expensive. Our goal has been to reduce the primary barrier preventing us from acquiring the observations we need to understand geodetic processes, and the hazards they present, at subduction zones, submarine volcanoes, and subsea landslides. To this end, we have designed a payload package for the University of Hawaii Wave Glider which incorporates an acoustic telemetry package, a dual frequency geodetic-grade Global Positioning System (GPS) receiver, meteorological sensors, processing computer, and cellular communications. The Wave Glider is able to interrogate high accuracy pressure sensors on the seafloor to maintain a near-continuous stream of ocean bottom pressure and temperature data. The Wave Glider also functions as an integral part of the seafloor geodetic observing system, recording accurate sea surface elevations and barometric pressure; direct measurements of two of the primary sources of seafloor pressure change. The seafloor geodetic monument seats a sensor capable of recording pressure, temperature, and sound velocity for a deployment duration of over 5 years with an acoustic modem for communications, and an integral acoustic release for recovery and replacement of batteries. The design of the geodetic monument allows for precise repositioning of the sensor to extend the pressure record beyond a single 5+ year deployment, and includes the capability to install a mobile pressure recorder for calibration of the linear drift of the continuous pressure sensor. We will present the results of our field tests and an assessment of our ability to determine cm-scale vertical seafloor motions by integrating our seafloor pressure measurements with the independent Wave Glider measurements of sea surface pressure and sea surface height. An overall summary of the performance and costs of making seafloor geodetic measurement with this system will be provided.

To the bottom of carbon processing at the seafloor: towards integration of geological, geochemical and ecological concepts (Vladimir Ivanovich Vernadsky Medal Lecture)

NASA Astrophysics Data System (ADS)

Middelburg, Jack J.

2017-04-01

Marine sediments are a habitat for organisms, govern the partitioning of material being buried or recycled, and act as filter for the paleorecord. Processes in the surface sediment layer determine whether carbon is recycled within the biosphere (short-term cycle) or transferred to the geosphere (long-term cycle) and as such it function as key interface in the System Earth. Scientists from various disciplines with their own interests, paradigms and techniques have studied this pivotal role of the seafloor in processing material deposited. Marine geologists and paleoceanographers study sediments with the primary aim to extract information on past environmental conditions using down-core measurements of substances delivered to the seafloor and that have survived the processing at the seafloor. Biogeochemists quantify the fate of material delivered, in particular how much of the material is eventually buried and when and in what form is the remaining recycled to the water column, because recycling of key nutrients (e.g. N, P, Si, Fe) sustain primary production. Organic geochemists investigate how organic matter delivered to the seafloor is degraded, transformed or preserved using changes in the composition at the molecular level. Ecologists focus on the organisms, i.e. the actors consuming, producing and transporting the material deposited. Although these disciplines often study the same material, e.g. organic matter delivered to the seafloor, they focus on different aspect ignoring key concepts, findings and approaches from other disciplines. For example, ecologists and biogeochemist studying carbon flow at the seafloor normally ignore detailed molecular information available from organic geochemistry. Bioturbation, particle transport and mixing at the seafloor, is often ignored by paleocanographers, and biogeochemists have developed advanced transport-reaction models in which the actors, the animals, mix the particles but do so without consuming organic matter, their food. Here I present existing views on organic carbon processing at the seafloor, discuss where they agree and disagree and aim to arrive at an integrated view of carbon processing at the seafloor that is consistent with recent views within the organic geochemical, sediment geochemical, ecological and microbiological communities.

Archive of Digital Boomer and CHIRP Seismic Reflection Data Collected During USGS Field Activity 08LCA03 in Lake Panasoffkee, Florida, May 2008

USGS Publications Warehouse

Harrison, Arnell S.; Dadisman, Shawn V.; McBride, W. Scott; Flocks, James G.; Wiese, Dana S.

2009-01-01

In May of 2008, the U.S. Geological Survey (USGS) conducted geophysical surveys in Lake Panasoffkee, located in central Florida, as part of the USGS Lakes and Coastal Aquifers (LCA) study. This report serves as an archive of unprocessed digital boomer and Compressed High Intensity Radar Pulse (CHIRP)* seismic reflection data, trackline maps, navigation files, Field Activity Collection System (FACS) logs, Geographic Information System (GIS) files, and formal Federal Geographic Data Committee (FGDC) metadata. Filtered and gained (a relative increase in signal amplitude) digital images of the seismic profiles and geospatially corrected interactive profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. *Due to poor data acquisition conditions associated with the lake bottom sediments, only two CHIRP tracklines were collected during this field activity. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU). Example SU processing scripts and USGS software for viewing the SEG-Y files (Zihlman, 1992) are provided. The USGS Florida Integrated Science Center (FISC) - St. Petersburg assigns a unique identifier to each cruise or field activity. For example, 08LCA03 tells us the data were collected in 2008 for the Lakes and Coastal Aquifers (LCA) study and the data were collected during the third field activity for that study in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The naming convention used for each seismic line is as follows: yye##a, where 'yy' are the last two digits of the year in which the data were collected, 'e' is a 1-letter abbreviation for the equipment type (for example, b for boomer and c for CHIRP), '##' is a 2-digit number representing a specific track, and 'a' is a letter representing the section of a line if recording was prematurely terminated or rerun for quality or acquisition problems. The boomer plate is an acoustic energy source that consists of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and, when discharged, emits a short acoustic pulse, or shot, which propagates through the water, sediment column, or rock beneath. The acoustic energy is reflected at density boundaries (such as the seafloor, sediment, or rock layers beneath the seafloor), detected by the receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2-D) vertical profile of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the boomer acquisition geometry. The EdgeTech SB-424 CHIRP system used for this survey has a vertical resolution of 4 - 8 cm, a penetration depth that is usually less than 2 m beneath the seafloor, and uses a signal of continuously varying frequency. The towfish is a sound source and receiver, which is typically towed 2 - 5 m above the seafloor. The acoustic energy is reflected at density boundaries (such as the seafloor or sediment layers beneath the seafloor), detected by a receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.125 s) and recorded for specific intervals of time (for example, 50 ms); the resulting profile is a two-dimensional vertical image of the shallow geologic structure beneath the ship track. Figure 2 displays the acquisition geometry for the CHIRP system. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics.

Automated sea floor extraction from underwater video

NASA Astrophysics Data System (ADS)

Kelly, Lauren; Rahmes, Mark; Stiver, James; McCluskey, Mike

2016-05-01

Ocean floor mapping using video is a method to simply and cost-effectively record large areas of the seafloor. Obtaining visual and elevation models has noteworthy applications in search and recovery missions. Hazards to navigation are abundant and pose a significant threat to the safety, effectiveness, and speed of naval operations and commercial vessels. This project's objective was to develop a workflow to automatically extract metadata from marine video and create image optical and elevation surface mosaics. Three developments made this possible. First, optical character recognition (OCR) by means of two-dimensional correlation, using a known character set, allowed for the capture of metadata from image files. Second, exploiting the image metadata (i.e., latitude, longitude, heading, camera angle, and depth readings) allowed for the determination of location and orientation of the image frame in mosaic. Image registration improved the accuracy of mosaicking. Finally, overlapping data allowed us to determine height information. A disparity map was created using the parallax from overlapping viewpoints of a given area and the relative height data was utilized to create a three-dimensional, textured elevation map.

BedMachine v3: Complete Bed Topography and Ocean Bathymetry Mapping of Greenland From Multibeam Echo Sounding Combined With Mass Conservation

NASA Astrophysics Data System (ADS)

Morlighem, M.; Williams, C. N.; Rignot, E.; An, L.; Arndt, J. E.; Bamber, J. L.; Catania, G.; Chauché, N.; Dowdeswell, J. A.; Dorschel, B.; Fenty, I.; Hogan, K.; Howat, I.; Hubbard, A.; Jakobsson, M.; Jordan, T. M.; Kjeldsen, K. K.; Millan, R.; Mayer, L.; Mouginot, J.; Noël, B. P. Y.; O'Cofaigh, C.; Palmer, S.; Rysgaard, S.; Seroussi, H.; Siegert, M. J.; Slabon, P.; Straneo, F.; van den Broeke, M. R.; Weinrebe, W.; Wood, M.; Zinglersen, K. B.

2017-11-01

Greenland's bed topography is a primary control on ice flow, grounding line migration, calving dynamics, and subglacial drainage. Moreover, fjord bathymetry regulates the penetration of warm Atlantic water (AW) that rapidly melts and undercuts Greenland's marine-terminating glaciers. Here we present a new compilation of Greenland bed topography that assimilates seafloor bathymetry and ice thickness data through a mass conservation approach. A new 150 m horizontal resolution bed topography/bathymetric map of Greenland is constructed with seamless transitions at the ice/ocean interface, yielding major improvements over previous data sets, particularly in the marine-terminating sectors of northwest and southeast Greenland. Our map reveals that the total sea level potential of the Greenland ice sheet is 7.42 ± 0.05 m, which is 7 cm greater than previous estimates. Furthermore, it explains recent calving front response of numerous outlet glaciers and reveals new pathways by which AW can access glaciers with marine-based basins, thereby highlighting sectors of Greenland that are most vulnerable to future oceanic forcing.

Mapping Subsea Permafrost Using Suface-Towed Electromagnetic Methods Near Prudhoe Bay, AK

NASA Astrophysics Data System (ADS)

Sherman, D.; Constable, S.

2017-12-01

We have developed a surface-towed electric dipole-dipole system capable of operating in shallow water and deployable from small boats. Our system uses electromagnetic energy from a modulated manmade source to interrogate the underlying resistivity structure of the seafloor. We used this system in the summers of 2014 and 2015 to map subsea ice-bonded permafrost on the Beaufort Shelf along 200 km of coastline, from Tigvariak Island to Harrison Bay. Permafrost is resistive and was found to be anisotropic, likely due to interbedded layers of frozen and unfrozen sediment. Maps of depth to permafrost and its thickness were produced and results compared to borehole logs in the area. We observed elevated resistivity values offshore the Sagavanirktok River outflow, supporting the idea that fresh groundwater flow has a preserving effect on submerged permafrost. This system provides a cost effective method that could be used to further quantify permafrost extent, provide a baseline for measurements of future degradation, answer questions about the relationship between coastal erosion rates and offshore permafrost, and provide observational constraints on pore water salinity to aid in permafrost modeling studies.

Assessing the Role of Seafloor Weathering in Global Geochemical Cycling

NASA Astrophysics Data System (ADS)

Farahat, N. X.; Abbot, D. S.; Archer, D. E.

2015-12-01

Low-temperature alteration of the basaltic upper oceanic crust, known as seafloor weathering, has been proposed as a mechanism for long-term climate regulation similar to the continental climate-weathering negative feedback. Despite this potentially far-reaching impact of seafloor weathering on habitable planet evolution, existing modeling frameworks do not include the full scope of alteration reactions or recent findings of convective flow dynamics. We present a coupled fluid dynamic and geochemical numerical model of low-temperature, off-axis hydrothermal activity. This model is designed to explore the the seafloor weathering flux of carbon to the oceanic crust and its responsiveness to climate fluctuations. The model's ability to reproduce the seafloor weathering environment is evaluated by constructing numerical simulations for comparison with two low-temperature hydrothermal systems: A transect east of the Juan de Fuca Ridge and the southern Costa Rica Rift flank. We explore the sensitivity of carbon uptake by seafloor weathering on climate and geology by varying deep ocean temperature, seawater dissolved inorganic carbon, continental weathering inputs, and basaltic host rock in a suite of numerical experiments.

Microbial Biogeochemistry of Seafloor Fluid Flow on Earth and Implications for Biological Potential on Enceladus

NASA Astrophysics Data System (ADS)

Huber, J. A.

2017-12-01

The interaction between liquid water and the rocky seafloor provides high potential for release of chemical energy, thus seafloor fluid flow is viewed an essential driver of subseafloor microbial life in Earth's oceans. Given predictions that Enceladus hosts a global-scale ocean underlain by a rocky seafloor, and new data suggesting on-going hydrothermal activity on Enceladus based on detection of hydrogen by Cassini, it is timely to investigate those subseafloor Earth analogs that may be informative when developing future missions to and interpreting mission data from Enceladus. Over the last 35 years, the breadth of seafloor fluid flow regimes that have been discovered and studied on Earth has expanded to include a wide spectrum of geological settings, geochemical characteristics, and microorganisms, including environments that were not previously known to exist, e.g. hydrogen-rich mafic systems, ridge-flank oxic systems, etc. This presentation will provide an overview of the latest and most exciting findings on the microbial biogeochemistry of seafloor fluid flow in Earth's oceans and place these findings in the context of biological potential for Enceladus.

Fluctuations in seafloor spreading predicted by tectonic reconstructions and mantle convection models

NASA Astrophysics Data System (ADS)

Coltice, Nicolas; Seton, Maria; Rolf, Tobias; Müller, R. Dietmar; Tackley, Paul J.

2013-04-01

The theory of plate tectonics theory has enabled possible the reconstruction of the ancient seafloor and paleogeography. Over 50 years of data collection and kinematic reconstruction efforts, plate models have improved significantly (Seton et al., 2012) although reconstructions of ancient seafloor are naturally limited by the limited preservation of of very old seafloor. It is challenging to reconstruct ancient ocean basins and associated plate boundaries for times earlier than 200 Ma, since seafloor of this age is not preserved. This means we can merely reconstruct only 5% of the history of the planet in this fashion. However, geodynamic models can now help evaluate how seafloor spreading may evolve over longer time periods, since recent developments of numerical models of mantle convection with pseudo-plasticity can generate long-term solutions that simulate a form of seafloor spreading (Moresi and Solomatov, 1998; Tackley, 2000a; Tackley, 2000b). The introduction of models of continental lithosphere further improves the quality of the predictions: the computed distribution of seafloor ages reproduces the consumption of young seafloor as observed on the present-day Earth (Coltice et al., 2012). The time-dependence of the production of new seafloor has long been debated and there is no consensus on how much it has varied in the past 150My, and how it could have fluctuated over longer time-scales. Using plate reconstructions, Parsons (1982) and Rowley (2002) proposed the area vs. age distribution of the seafloor could have experienced limited fluctuations in the past 150My while others suggest stronger variations would fit the observations equally well (Seton et al., 2009. Here we propose to investigate the global dynamics of seafloor spreading using state-of-the-art plate reconstructions and geodynamic models. We focus on the evolution of the distribution of seafloor ages because fundamental geophysical observations like mantle heat flow or sea level provide "ground-truth" for modeling this parameter. Both kinematic reconstructions and geodynamic models suggest the rate of production of new seafloor can vary by a factor of 3 over a Wilson cycle, with concomitant changes of the shape of the area vs. age distribution. Geodynamic models show seafloor production time-series contain fluctuations of time scales exceeding 500My that depend on the strength of the lithosphere and the amount of basal heating. References Coltice, N., Rolf, T., Tackley P.J., Labrosse, S., Dynamic causes of the relation between area and age of the ocean floor, Science 336, 335-338 (2012). Moresi, L., Solomatov, V., Mantle convection with a brittle lithosphere: Thoughts on the global tectonic style of the Earth and Venus, Geophys. J. 133, 669-682 (1998). Parsons, B., 1982, Causes and consequences of the relation between area and age of the ocean floor, J. of Geophys. Res. 87, 289-302 (1982). Rowley, D. B., History of Plate Creation 180 Ma to Present, Geol. Soc. of America Bull. 114, 927-933 (2002). Seton, M., Gaina, C., Müller, R.D., and Heine, C., Mid Cretaceous Seafloor Spreading Pulse: Fact or Fiction?, Geology, 37, 687-690 (2009). Seton, M., Müller, R.D., Zahirovic, S., Gaina, C., Torsvik, T.H., Shephard, G., Talsma, A., Gurnis, M., Turner, M., Maus, S., Chandler, M. (2012), Global continental and ocean basin reconstructions since 200 Ma, Earth Sci. Rev. 113, 212-270 (2012). Tackley, P.J., Self-consistent generation of tectonic plates in time-dependent, three-dimensional mantle convection simulations, part 1: Pseudoplastic yielding, Geoch. Geophys. Geosys. 1 (2000a). Tackley, P.J., Self-consistent generation of tectonic plates in time-dependent, three-dimensional mantle convection simulations, part 2: Strain weakening and asthenosphere, Geochem. Geophys. Geosys. 1, (2000b).

Global Multi-Resolution Topography (GMRT) Synthesis - Version 2.0

NASA Astrophysics Data System (ADS)

Ferrini, V.; Coplan, J.; Carbotte, S. M.; Ryan, W. B.; O'Hara, S.; Morton, J. J.

2010-12-01

The detailed morphology of the global ocean floor is poorly known, with most areas mapped only at low resolution using satellite-based measurements. Ship-based sonars provide data at resolution sufficient to quantify seafloor features related to the active processes of erosion, sediment flow, volcanism, and faulting. To date, these data have been collected in a small fraction of the global ocean (<10%). The Global Multi-Resolution Topography (GMRT) synthesis makes use of sonar data collected by scientists and institutions worldwide, merging them into a single continuously updated compilation of high-resolution seafloor topography. Several applications, including GeoMapApp (http://www.geomapapp.org) and Virtual Ocean (http://www.virtualocean.org), make use of the GMRT Synthesis and provide direct access to images and underlying gridded data. Source multibeam files included in the compilation can also accessed through custom functionality in GeoMapApp. The GMRT Synthesis began in 1992 as the Ridge Multibeam Synthesis. It was subsequently expanded to include bathymetry data from the Southern Ocean, and now includes data from throughout the global oceans. Our design strategy has been to make data available at the full native resolution of shipboard sonar systems, which historically has been ~100 m in the deep sea (Ryan et al., 2009). A new release of the GMRT Synthesis in Fall of 2010 includes several significant improvements over our initial strategy. In addition to increasing the number of cruises included in the compilation by over 25%, we have developed a new protocol for handling multibeam source data, which has improved the overall quality of the compilation. The new tileset also includes a discrete layer of sonar data in the public domain that are gridded to the full resolution of the sonar system, with data gridded 25 m in some areas. This discrete layer of sonar data has been provided to Google for integration into Google’s default ocean base map. NOAA coastal grids and numerous grids contributed by the international science community are also integrated into the GMRT Synthesis. Finally, terrestrial elevation data from NASA’s ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) global DEM, and the USGS National Elevation Dataset have been included in the synthesis, providing resolution of up to 10 m in some areas of the US.

The Challenge of High-resolution Mapping of Very Shallow Coastal Areas: Case Study of the Lagoon of Venice, Italy

NASA Astrophysics Data System (ADS)

Madricardo, F.; Foglini, F.; Kruss, A.; Bajo, M.; Campiani, E.; Ferrarin, C.; Fogarin, S.; Grande, V.; Janowski, L.; Keppel, E.; Leidi, E.; Lorenzetti, G.; Maicu, F.; Maselli, V.; Montereale Gavazzi, G.; Pellegrini, C.; Petrizzo, A.; Prampolini, M.; Remia, A.; Rizzetto, F.; Rovere, M.; Sarretta, A.; Sigovini, M.; Toso, C.; Zaggia, L.; Trincardi, F.

2017-12-01

Very shallow coastal environments are often highly urbanized with half of the world's population and 13 of the largest mega-cities located close to the coast. These environments undergo rapid morphological changes due to natural and anthropogenic pressure that will likely be enhanced in the near future by mean sea-level rise. Therefore, there is a strong need for high resolution seafloor mapping to monitor and protect shallow coastal areas. To date, only about 5% of their seafloor has been mapped: their shallowness has prevented so far the use of underwater acoustics to reveal their morphological features; their turbidity often hindered the efficient use of LIDAR technology, particularly in lagoons and estuaries. The recent technological development of multibeam echosounder systems, however, enables these instruments to achieve very high performances also in such shallow environments. In this work, we present the results of an extensive multibeam survey carried out in the Lagoon of Venice (Italy) in 2013. The Lagoon of Venice is the biggest lagoon in the Mediterranean Sea (surface area of about 550 km2, average depth of about 1 m) and it is a UNESCO World Cultural and Natural Heritage site together with the historical city of Venice which is currently endangered by relative sea-level rise. Major engineering works are ongoing at the lagoon inlets (MOSE project) to protect Venice from flood events. In the last century, the morphology and ecology of the lagoon changed dramatically: the extent of the salt marshes was reduced by 60% and some parts of the lagoon deepened by more than 1 m with a net sediment flux exiting from the inlets. To understand and monitor the future evolution of the Lagoon of Venice in view of the inlet modifications and mean sea-level rise, CNR-ISMAR within the project RITMARE (a National Research Programme funded by the Italian Ministry of University and Research) carried out an extensive survey, involving a team of more than 25 scientists, to collect high resolution (0.5 m) bathymetry of key study areas such as the tidal inlets and channels. Bathymetric and backscatter intensity data are now employed for geomorphologic studies, habitat mapping and modelling representing a paradigm of a broad multidisciplinary approach to monitor shallow coastal systems.

Large Aperture Acoustic Arrays in Support of Reverberation Studies

DTIC Science & Technology

1990-04-01

Acoustic Reverberation Special Research Program (SRP). Approach We propose the development of several acoustic arrays in preparation for a FY92 experiment...hydrophone array to measure the directional spectrum of seafloor scattered wavefields. Approach As part of the ONT-sponsored, 1987 SVLA experiment, we...scattered energy. Approach Two methods will be described by which vertical and horizontal acoustic arrays can be deployed together for making bottom

Nature of a cone-shaped subsurface feature below a large seafloor depression on the Chatham Rise, New Zealand

NASA Astrophysics Data System (ADS)

Waghorn, K. A.; Pecher, I. A.; Strachan, L. J.; Crutchley, G.; Coffin, R. B.; Rose, P. S.; Bialas, J.; Davy, B. W.; Kroeger, K.

2013-12-01

An area of extensive seafloor depressions occurs on the Southern Chatham Rise, New Zealand. The 2013 R/V Sonne SO-226 voyage aimed to investigate the formation and occurrences of these features and their possible relation to release of gas during glacial-interglacial cycles. The seafloor depressions occur in water depths of 500-1100m. This presentation focuses on a depression with a diameter of approximately 1km in a water depth of ~1000m. We present initial results from a high-resolution subsurface 3D seismic data cube collected across the seafloor depression. The data were collected using the P-Cable system, which has been developed specifically for imaging the shallow subsurface. The data shows an enigmatic conical-shaped feature underlying the seafloor depression with an area surrounding which has been initially interpreted as a giant gas chimney flow-zone. While geochemical results indicate no present day methane flux, the geophysical data shows a presence of blanking which may be associated with gas or gas hydrate close to the seafloor. We show first interpretations of the nature of this feature and its emplacement. Our preferred causes are either a volcanic cone or a mud diapir. We speculate that emplacement of this feature has been instrumental in forming the overlying seafloor depressions but are still evaluating the potential linkages.

Seafloor environments in the Long Island Sound estuarine system

USGS Publications Warehouse

Knebel, H.J.; Signell, R.P.; Rendigs, R. R.; Poppe, L.J.; List, J.H.

1999-01-01

Four categories of modern seafloor sedimentary environments have been identified and mapped across the large, glaciated, topographically complex Long Island Sound estuary by means of an extensive regional set of sidescan sonographs, bottom samples, and video-camera observations and supplemental marine-geologic and modeled physical-oceanographic data. (1) Environments of erosion or nondeposition contain sediments which range from boulder fields to gravelly coarse-to-medium sands and appear on the sonographs either as patterns with isolated reflections (caused by outcrops of glacial drift and bedrock) or as patterns of strong backscatter (caused by coarse lag deposits). Areas of erosion or nondeposition were found across the rugged seafloor at the eastern entrance of the Sound and atop bathymetric highs and within constricted depressions in other parts of the basin. (2) Environments of bedload transport contain mostly coarse-to-fine sand with only small amounts of mud and are depicted by sonograph patterns of sand ribbons and sand waves. Areas of bedload transport were found primarily in the eastern Sound where bottom currents have sculptured the surface of a Holocene marine delta and are moving these sediments toward the WSW into the estuary. (3) Environments of sediment sorting and reworking comprise variable amounts of fine sand and mud and are characterized either by patterns of moderate backscatter or by patterns with patches of moderate-to-weak backscatter that reflect a combination of erosion and deposition. Areas of sediment sorting and reworking were found around the periphery of the zone of bedload transport in the eastern Sound and along the southern nearshore margin. They also are located atop low knolls, on the flanks of shoal complexes, and within segments of the axial depression in the western Sound. (4) Environments of deposition are blanketed by muds and muddy fine sands that produce patterns of uniformly weak backscatter. Depositional areas occupy broad areas of the basin floor in the western part of the Sound. The regional distribution of seafloor environments reflects fundamental differences in marine-geologic conditions between the eastern and western parts of the Sound. In the funnel-shaped eastern part, a gradient of strong tidal currents coupled with the net nontidal (estuarine) bottom drift produce a westward progression of environments ranging from erosion or nondeposition at the narrow entrance to the Sound, through an extensive area of bedload transport, to a peripheral zone of sediment sorting. In the generally broader western part of the Sound, a weak tidal-current regime combined with the production of particle aggregates by biologic or chemical processes, cause large areas of deposition that are locally interrupted by a patchy distribution of various other environments where the bottom currents are enhanced by and interact with the seafloor topography.

Distribution of Recent Volcanism and Morphology of Volcanic Features in the GLIMPSE Study Area west of the East Pacific Rise

NASA Astrophysics Data System (ADS)

Scheirer, D.; Forsyth, D.; Harmon, N.; Duncan, R.

2003-12-01

The existence of seamounts and volcanic ridges west of the East Pacific Rise (EPR), perhaps associated with cross-grain gravity lineations, was initially revealed by detailed satellite altimetry. Multibeam bathymetry and sidescan reflectivity measurements made on board the R/V Melville in 2001 and 2002 as part of the GLIMPSE Experiment, plus additional data gathered on other cruises including those of the MELT Experiment, have allowed us to map the distribution of recent, off-axis volcanic activity west of the EPR and south of the Garrett Fracture Zone and to more precisely define the form of the volcanic features. The Southern Cross Seamount, Sojourn Ridge and Brown Ridge combine to form a linear feature nearly 500 km long, oriented perpendicular to the EPR about 80 km south of the Garrett FZ. Both the Sojourn and Brown ridges comprise several en echelon segments, each about 30 km long, linked together to form continuous topographic highs standing 2000 m or more above the surrounding seafloor. Side-scan data reveal reflective patches along the Brown Ridge at the eastern end of this feature that appear to be recent lava flows. Dredging of fresh basalts dated by Ar/Ar methods at about 0.3 Ma confirm this interpretation. The Southern Cross Seamount, at the western end of the chain, is the largest individual feature, standing more than 3.5 km above the surrounding seafloor and shoaling to depths less than 200 m below sealevel. The Hotu-Matua volcanic complex also extends for several hundred km, but is much more varied in its morphology. The western end has some very small, very linear ridges, flanked on the south by an extensive region of resurfaced, hummocky seafloor. This area is more reflective and presumably younger than the surrounding seafloor, but less reflective than the areas interpreted as recent flows. Roughly midway along this complex are the Hotu and Matua seamounts. Surrounding Matua is an extensive region of highly reflective, recent lava flows, some of which seem to have been dammed against pre-existing, small seamounts. Age dates in this area are highly variable, ranging from <0.6 to about 6 Ma, also suggesting a mixture of pre-existing and resurfaced seafloor. Reflective flows are scattered over a roughly linear region extending another 150 km to the east of Matua, sometimes associated with very small seamounts and sometimes appearing just to fill topographic lows. We find no evidence in the detailed bathymetry or sidescan in this region for any pre-existing tectonic features or cracks extending along the line of volcanic activity.

High-resolution seismic-reflection and marine-magnetic data from offshore central California--San Gregorio to Point Sur

USGS Publications Warehouse

Sliter, Ray W.; Johnson, Samuel Y.; Watt, Janet T.; Scheirer, Daniel S.; Allwardt, Parker; Triezenberg, Peter J.

2013-01-01

The U.S. Geological Survey collected high-resolution seismic-reflection data on four surveys (S-N1-09-MB, S-15-10-NC, S-06-11-MB, and S-04-12-MB) and marine-magnetic data on one survey (S-06-11-MB) between 2009 and 2012, offshore of central California between San Gregorio and Point Sur. This work was supported in part by the California Seafloor Mapping Program. The survey areas span about 120 km of California's coast (including Monterey Bay). Most data were collected aboard the U.S. Geological Survey R/V Parke Snavely. Cumulatively, approximately 1,410 km of single-channel seismic-reflection data were acquired, mainly using a SIG 2mille minisparker. About 44 km of data were collected simultaneously using an EdgeTech Chirp 512. Subbottom acoustic penetration spanned tens to several hundreds of meters, variable by location. Marine magnetic data were collected on approximately 460 km of track lines (mainly in southern Monterey Bay) using a Geometrics G882 cesium-vapor marine magnetometer. This report includes maps and navigation files of the surveyed transects, linked to Google Earth™ software, as well as digital data files showing images of each transect in SEG-Y and JPEG formats. The images of bedrock, sediment deposits, and tectonic structure provide geologic information that is essential to hazard assessment, regional sediment management, and coastal and marine spatial planning at Federal, State and local levels, as well as to future research on the geomorphic, sedimentary, tectonic, and climatic record of central California.

Error, Power, and Blind Sentinels: The Statistics of Seagrass Monitoring

PubMed Central

Schultz, Stewart T.; Kruschel, Claudia; Bakran-Petricioli, Tatjana; Petricioli, Donat

2015-01-01

We derive statistical properties of standard methods for monitoring of habitat cover worldwide, and criticize them in the context of mandated seagrass monitoring programs, as exemplified by Posidonia oceanica in the Mediterranean Sea. We report the novel result that cartographic methods with non-trivial classification errors are generally incapable of reliably detecting habitat cover losses less than about 30 to 50%, and the field labor required to increase their precision can be orders of magnitude higher than that required to estimate habitat loss directly in a field campaign. We derive a universal utility threshold of classification error in habitat maps that represents the minimum habitat map accuracy above which direct methods are superior. Widespread government reliance on blind-sentinel methods for monitoring seafloor can obscure the gradual and currently ongoing losses of benthic resources until the time has long passed for meaningful management intervention. We find two classes of methods with very high statistical power for detecting small habitat cover losses: 1) fixed-plot direct methods, which are over 100 times as efficient as direct random-plot methods in a variable habitat mosaic; and 2) remote methods with very low classification error such as geospatial underwater videography, which is an emerging, low-cost, non-destructive method for documenting small changes at millimeter visual resolution. General adoption of these methods and their further development will require a fundamental cultural change in conservation and management bodies towards the recognition and promotion of requirements of minimal statistical power and precision in the development of international goals for monitoring these valuable resources and the ecological services they provide. PMID:26367863

Fluid expulsion sites on the Cascadia accretionary prism: mapping diagenetic deposits with processed GLORIA imagery

USGS Publications Warehouse

Carson, Bobb; Seke, Erol; Paskevich, Valerie F.; Holmes, Mark L.

1994-01-01

Point-discharge fluid expulsion on accretionary prisms is commonly indicated by diagenetic deposition of calcium carbonate cements and gas hydrates in near-surface (<10 m below seafloor; mbsf) hemipelagic sediment. The contrasting clastic and diagenetic lithologies should be apparent in side scan images. However, sonar also responds to variations in bottom slope, so unprocessed images mix topographic and lithologic information. We have processed GLORIA imagery from the Oregon continental margin to remove topographic effects. A synthetic side scan image was created initially from Sea Beam bathymetric data and then was subtracted iteratively from the original GLORIA data until topographic features disappeared. The residual image contains high-amplitude backscattering that we attribute to diagenetic deposits associated with fluid discharge, based on submersible mapping, Ocean Drilling Program drilling, and collected samples. Diagenetic deposits are concentrated (1) near an out-of-sequence thrust fault on the second ridge landward of the base of the continental slope, (2) along zones characterized by deep-seated strikeslip faults that cut transversely across the margin, and (3) in undeformed Cascadia Basin deposits which overlie incipient thrust faults seaward of the toe of the prism. There is no evidence of diagenetic deposition associated with the frontal thrust that rises from the dècollement. If the dècollement is an important aquifer, apparently the fluids are passed either to the strike-slip faults which intersect the dècollement or to the incipient faults in Cascadia Basin for expulsion. Diagenetic deposits seaward of the prism toe probably consist dominantly of gas hydrates.

Hybrid optical acoustic seafloor mapping

NASA Astrophysics Data System (ADS)

Inglis, Gabrielle

The oceanographic research and industrial communities have a persistent demand for detailed three dimensional sea floor maps which convey both shape and texture. Such data products are used for archeology, geology, ship inspection, biology, and habitat classification. There are a variety of sensing modalities and processing techniques available to produce these maps and each have their own potential benefits and related challenges. Multibeam sonar and stereo vision are such two sensors with complementary strengths making them ideally suited for data fusion. Data fusion approaches however, have seen only limited application to underwater mapping and there are no established methods for creating hybrid, 3D reconstructions from two underwater sensing modalities. This thesis develops a processing pipeline to synthesize hybrid maps from multi-modal survey data. It is helpful to think of this processing pipeline as having two distinct phases: Navigation Refinement and Map Construction. This thesis extends existing work in underwater navigation refinement by incorporating methods which increase measurement consistency between both multibeam and camera. The result is a self consistent 3D point cloud comprised of camera and multibeam measurements. In map construction phase, a subset of the multi-modal point cloud retaining the best characteristics of each sensor is selected to be part of the final map. To quantify the desired traits of a map several characteristics of a useful map are distilled into specific criteria. The different ways that hybrid maps can address these criteria provides justification for producing them as an alternative to current methodologies. The processing pipeline implements multi-modal data fusion and outlier rejection with emphasis on different aspects of map fidelity. The resulting point cloud is evaluated in terms of how well it addresses the map criteria. The final hybrid maps retain the strengths of both sensors and show significant improvement over the single modality maps and naively assembled multi-modal maps.

Salt tectonics and shallow subseafloor fluid convection: Models of coupled fluid-heat-salt transport

USGS Publications Warehouse

Wilson, A.; Ruppel, C.

2007-01-01

Thermohaline convection associated with salt domes has the potential to drive significant fluid flow and mass and heat transport in continental margins, but previous studies of fluid flow associated with salt structures have focused on continental settings or deep flow systems of importance to petroleum exploration. Motivated by recent geophysical and geochemical observations that suggest a convective pattern to near-seafloor pore fluid flow in the northern Gulf of Mexico (GoMex), we devise numerical models that fully couple thermal and chemical processes to quantify the effects of salt geometry and seafloor relief on fluid flow beneath the seafloor. Steady-state models that ignore halite dissolution demonstrate that seafloor relief plays an important role in the evolution of shallow geothermal convection cells and that salt at depth can contribute a thermal component to this convection. The inclusion of faults causes significant, but highly localized, increases in flow rates at seafloor discharge zones. Transient models that include halite dissolution show the evolution of flow during brine formation from early salt-driven convection to later geothermal convection, characteristics of which are controlled by the interplay of seafloor relief and salt geometry. Predicted flow rates are on the order of a few millimeters per year or less for homogeneous sediments with a permeability of 10−15 m2, comparable to compaction-driven flow rates. Sediment permeabilities likely fall below 10−15 m2 at depth in the GoMex basin, but such thermohaline convection can drive pervasive mass transport across the seafloor, affecting sediment diagenesis in shallow sediments. In more permeable settings, such flow could affect methane hydrate stability, seafloor chemosynthetic communities, and the longevity of fluid seeps.

An Autonomous, Low Cost Platform for Seafloor Geodetic Observations

NASA Astrophysics Data System (ADS)

Ericksen, T.; Foster, J. H.; Bingham, B. S.; Oshiro, J.

2014-12-01

The Pacific GPS Facility and the Field Robotics Laboratory at the University of Hawaii have developed an approach to significantly reduce costs below ship based methods of accurately measuring short-term vertical motions of the seafloor and maintaining a continuous long-term record of seafloor pressure. Our goal has been to reduce the primary barrier preventing us from acquiring the observations we need to understand geodetic processes, and the hazards they present, at subduction zones, submarine volcanoes, and subsea landslides. To this end, we have designed a payload package for one of the University of Hawaii Wave Gliders which incorporates an acoustic telemetry package, a dual frequency geodetic-grade Global Positioning System (GPS) receiver, meteorological sensors, processing computer, and cellular communications. The Wave Glider will interrogate high accuracy pressure sensors on the seafloor to maintain a near-continuous stream of pressure and temperature data. The seafloor geodetic monument seats a sensor capable of recording pressure, temperature, and sound velocity for a deployment duration of over 5 years with an acoustic modem for communications, and an integral acoustic release for recovery and replacement of batteries. The design of the geodetic monument allows for precise repositioning of the sensor to extend the pressure record beyond a single 5+ year deployment, and includes the capability to install a mobile pressure recorder for calibration of the linear drift of the continuous pressure sensor. We will present the design of the Wave Glider payload and seafloor geodetic monument, as well as a discussion of nearshore and offshore field tests and operational procedures. An assessment of our ability to determine cm-scale vertical seafloor motions will be made by integrating the seafloor pressure measurements recovered during field testing with independent measurements of sea surface pressure and sea surface height made by the sea surface payload.

The First-ever Detection and Tracking of a Mid-Ocean Ridge Volcanic Eruption Using the Recently Completed, NSF-Funded, Submarine Fiber-Optic Network in the Juan de Fuca Region.

NASA Astrophysics Data System (ADS)

Delaney, J. R.

2015-12-01

The most scientifically diverse and technologically advanced component of the Ocean Observatories Initiative involves 900 km of electro-optical fiber, extending from Pacific City, OR, across active portions of the JDF tectonic plate, and upward into the overlying ocean. Completed in 2014, on time and under budget, this network enables real-time, high-bandwidth, 2-way communication with seafloor/water-column sensor arrays across: 1. the Cascadia accretionary prism, 2. the JdF spreading center, and, 3. portions of the overlying NE Pacific. Oceanographic processes in coastal environments, the California Current, and 400 km offshore, are captured by six remote-controlled, profiling moorings covering full-ocean depths. In August, 2015, all sections of cable, all six operational primary nodes, all 17 junction boxes, and 97% of all 146 instruments are transmitting data ashore to the Internet via the Pacific Northwest Gigapop (http://www.pnwgp.net/). All data are archived at the U of Washington, pending completion of the OOI CyberInfrastructure System in October 2015. In 2014, community requests to access seismic and seafloor deformational information for assessment of progressive inflation at Axial Seamount (Chadwick et al, 2012), resulted in NSF releasing, through IRIS (http://www.iris.edu/hq/), real-time data from 7 seismometers and 3 pressure sensors. At a community-initiated meeting on April 20-22, 90 participants covering the spectrum of Ocean Sciences, met in Seattle to explore scientific responses in the event Axial actually erupted (http://novae.ocean.washington.edu). On April 24, Axial did erupt; seismic event counts rose dramatically to many hundreds/hour (Wilcock, AGU-2015), the Axial caldera floor dropped 2.2 m in ~20 hours (Nooner et al, AGU-2015), and water temperatures in the caldera rose slowly by ~0.7°C, then declined in 3 weeks to normal values. Unusual water-bourn acoustic signals indicated ongoing seafloor activity along the rift zone extending north from Axial. Seafloor mapping indicates new lava in that area (Kelley, AGU-2015). Additional in situ observations in August are planned. These events signal a new era in Ocean Sciences as instantaneous Internet access to events far offshore begin allowing interactive responses to complex processes unfolding within our ocean.

Automated Rugosity Values From High Frequency Multibeam Sonar Data for Benthic Habitat Classification

NASA Astrophysics Data System (ADS)

Diurba, E. S.; Appelgate, B.

2005-12-01

Rugosity literally means wrinkled, or marked with folds and ridges. When applied to seafloor texture, rugosity is one piece of the puzzle that is necessary in order to understand benthic habitats. On a simple level, rugosity is a proxy for habitat complexity and serves as a basis for predicting population density as well as species inhabitants (Friedlander, 1998). Traditionally, rugosity was calculated by draping a chain of known length over the seafloor and comparing the total chain length with the distance the chain covered. The equation Rugosity=100*(length of chain/ actual length of chain) was then applied to get a percent rugosity. However, the process is time consuming and provides little information about the overall bottom roughness. Our objective was to develop a new acoustic method for measuring rugosity and employ this method in conjunction with other types of data, to rapidly characterize the seafloor of a coral reef environment. We developed an automated algorithm to determine the acoustic rugosity of seafloor surfaces from a 240 kHz multibeam sonar data on a ping-by-ping basis. The multibeam data was collected in 2003 during a survey of an anchorage along the NW side of Saipan. This data, collected by the National Oceanic and Atmospheric Administration's (NOAA) Coral Reef Ecosystem Division (CRED), utilized a RESON SeaBat 8101 multibeam sonar that has a vertical resolution of 1.25cm and a range capability of 300m. Each 150 degree ping consists of 101 beams that are each individually logged with x (distance across the ping), and z (depth) coordinates. The rugosity algorithm bins the beams along each ping and uses the x and z coordinates to calculate rugosity. By binning the data solely in the cross-track direction, all rugosity calculations preserve the spatial resolution without distortions from along-track averaging and gridding. This method allows for extremely detailed data sets and quick information about surveyed areas that would otherwise have taken years for divers to manually collect to the same level of resolution. The final product is an objectively derived, quantitative map that is easily comparable to the bathymetry and sidescan data. We present results of this method, using various bin sizes, to show how they compare with other spatial indications of rugosity, as well as with manual and optical rugosity measurements.

Analysis of seafloor backscatter strength dependence on the survey azimuth using multibeam echosounder data

NASA Astrophysics Data System (ADS)

Lurton, Xavier; Eleftherakis, Dimitrios; Augustin, Jean-Marie

2018-06-01

The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following "compass rose" patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed.

Large-scale deep-water seafloor mapping from the Rockall to the Hatton basins, NE Atlantic

NASA Astrophysics Data System (ADS)

Monteys, X.; Thébaudeau, B.; Murcia, C.; Duncan, N.

2016-02-01

Multibeam data acquired in 2000 and 2001 during the Irish National Seabed Survey (INSS) are used for the first detailed investigation of the seabed geomorphology and sediment type in the Hatton-Rockall basin area of the North East Atlantic Ocean, covering an area of approximately 80,000 km². The original multibeam survey produced bathymetric and backscatter datasets that allowed the creation of a Digital Terrain Models of approximately 50 m in resolution in water depths between 500 and 3500 m. Near-surface sediments for the entire region haven been classified using features derived from multibeam angular backscatter data (12kHz) and robust unsupervised clustering techniques. Additionally, sub bottom data imaging the shallow stratigraphy and geomagnetic measurements collected at the time of the MBES survey are combined to further characterise some of the features identified. The features presented in detail include parts of the Hatton and Gardar contourite drifts, volcanic mounds identified by their morphology and magnetic signature, deep-water coral mounds, iceberg scours as well as canyons, gullies and escarpments along and down the slopes of the banks and mounds. This study highlights for the first time the variety and complexity of the seafloor present at the seabed in the Irish Hatton-Rockall basin area

Seafloor off Natural Bridges State Beach, Santa Cruz, California

USGS Publications Warehouse

Storlazzi, Curt D.; Golden, Nadine E.; Gibbons, Helen

2013-01-01

The seafloor off Natural Bridges State Beach, Santa Cruz, California, is extremely varied, with sandy flats, boulder fields, faults, and complex bedrock ridges. These ridges support rich marine ecosystems; some of them form the "reefs" that produce world-class surf breaks. Colors indicate seafloor depth, from red-orange (about 2 meters or 7 feet) to magenta (25 meters or 82 feet).

Seafloor off Lighthouse Point Park, Santa Cruz, California

USGS Publications Warehouse

Storlazzi, Curt D.; Golden, Nadine E.; Gibbons, Helen

2013-01-01

The seafloor off Lighthouse Point Park, Santa Cruz, California, is extremely varied, with sandy flats, boulder fields, faults, and complex bedrock ridges. These ridges support rich marine ecosystems; some of them form the "reefs" that produce world-class surf breaks. Colors indicate seafloor depth, from red-orange (about 2 meters or 7 feet) to magenta (25 meters or 82 feet).

Seafloor off Pleasure Point, Santa Cruz County, California

USGS Publications Warehouse

Storlazzi, Curt D.; Golden, Nadine E.; Gibbons, Helen

2013-01-01

The seafloor off Pleasure Point, Santa Cruz County, California, is extremely varied, with sandy flats, boulder fields, faults, and complex bedrock ridges. These ridges support rich marine ecosystems; some of them form the "reefs" that produce world-class surf breaks. Colors indicate seafloor depth, from red-orange (about 2 meters or 7 feet) to magenta (25 meters or 82 feet)

Seafloor Geodesy usi­ng Wave Gliders to study Earthquake and Tsunami Hazards at Subduction Zones

NASA Astrophysics Data System (ADS)

Sathiakumar, S.; Barbot, S.; Hill, E.; Peng, D.; Zerucha, J.; Suhaimee, S.; Chia, G.; Salamena, G. G.; Syahailatua, A.

2016-12-01

Land-based GNSS networks are now in place to monitor most subduction zones of the world. These provide valuable information about the amount of­ geodetic strain accumulated in the region, which in turn gives insight into the seismic potential. However, it is usually impossible to resolve activity on the megathrust near the trench using land-based GNSS data alone, given typical signal-to-noise ratios. Ship-based seafloor geodesy is being used today to fill this observation gap. However, surveys using ships are very expensive, tedious and impractical due to the large areas to be covered. Instead of discrete missions using ships, continuous monitoring of the seafloor using autonomous marine robots would aid in understanding the tectonic setting of the seafloor better at a potentially lower cost, as well as help in designing better warning systems. Thus, we are developing seafloor geodesy capabilities using Wave Gliders, a new class of wave-propelled, persistent marine autonomous vehicle using a combination of acoustic and GNSS technologies. We use GNSS/INS to position the platform, and acoustic ranging to locate the seafloor. The GNSS/INS system to be integrated with the Wave Gliders has stringent requirements of low power, light weight, and high accuracy. All these factors are equally important due to limited power and space in the Wave Gliders and the need for highly accurate and precise measurements. With this hardware setup, a limiting factor is the accuracy of measurement of the sound velocity in the water column. We plan to obtain precise positioning of seafloor by exploring a measurement setup that minimizes uncertainties in sound velocity. This will be achieved by making fine-resolution measurements of the two-way travel time of the acoustic waves underwater using the Wave Gliders, and performing statistical signal processing on this data to obtain more reliable sound velocity measurement. This enhanced seafloor geodetic technique using Wave Gliders should enable us to measure deformation of the seafloor over annual and decadal time scales. Combination of seafloor data with land based GPS networks would allow us to study processes from the deep-ocean trench to the coast in a better way, and thereby give a more complete picture of the subduction process.

Scattering of Acoustic Energy from Rough Deep Ocean Seafloor: a Numerical Modeling Approach.

NASA Astrophysics Data System (ADS)

Robertsson, Johan Olof Anders

1995-01-01

The highly heterogeneous and anelastic nature of deep ocean seafloor results in complex reverberation as acoustic energy incident from the overlaying water column interacts and scatters from it. To gain a deeper understanding of the mechanisms causing the reverberation in sonar and seafloor scattering experiments, we have developed numerical simulation techniques that are capable of modeling the principal physical properties of complex seafloor structures. A new viscoelastic finite-difference technique for modeling anelastic wave propagation in 2-D and 3-D heterogeneous media, as well as a computationally optimally efficient method for quantifying the anelastic properties in terms of viscoelastic mechanics are presented. A method for reducing numerical dispersion using a Galerkin-wavelet formulation that enables large computational savings is also presented. The widely different regimes of wave propagation occurring in ocean acoustic problems motivate the use of hybrid simulation techniques. HARVEST (Hybrid Adaptive Regime Visco-Elastic Simulation Technique) combines solutions from Gaussian beams, viscoelastic finite-differences, and Kirchhoff extrapolation, to simulate large offset scattering problems. Several scattering hypotheses based on finite -difference simulations of short-range acoustic scattering from realistic seafloor models are presented. Anelastic sediments on the seafloor are found to have a significant impact on the backscattered field from low grazing angle scattering experiments. In addition, small perturbations in the sediment compressional velocity can also dramatically alter the backscattered field due to transitions between pre- and post-critical reflection regimes. The hybrid techniques are employed to simulate deep ocean acoustic reverberation data collected in the vicinity of the northern mid-Atlantic ridge. In general, the simulated data compare well to the real data. Noise partly due to side-lobes in the beam-pattern of the receiver -array is the principal source of reverberation at lower levels. Overall, the employed seafloor models were found to model the real seafloor well. Inaccurately predicted events may partly be attributed to the intrinsic uncertainty in the stochastic seafloor models. For optimal comparison between real and HARVEST simulated data the experimental geometry should be chosen so that 3-D effects may be ignored, and to yield a cross-range resolution in the beam-formed acoustic data that is small relative to the lineation of the seafloor.

Archive of digital chirp subbottom profile data collected during USGS cruise 10BIM04 offshore Cat Island, Mississippi, September 2010

USGS Publications Warehouse

Forde, Arnell S.; Dadisman, Shawn V.; Kindinger, Jack G.; Miselis, Jennifer L.; Wiese, Dana S.; Buster, Noreen A.

2012-01-01

In September of 2010, the U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers (USACE), conducted a geophysical survey to investigate the geologic controls on barrier island framework of Cat Island, Miss., as part of a broader USGS study on Barrier Island Mapping (BIM). These surveys were funded through the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project as part of the Holocene Coastal Evolution of the Mississippi-Alabama Region Subtask. This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. The USGS Saint Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 10BIM04 tells us the data were collected in 2010 during the fourth field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity identification (ID). All chirp systems use a signal of continuously varying frequency; the EdgeTech SB-512i system used during this survey produces high-resolution, shallow-penetration (typically less than 50 milliseconds (ms)) profile images of sub-seafloor stratigraphy. The towfish contains a transducer that transmits and receives acoustic energy; it was housed within a float system (built at the SPCMSC), which allows the towfish to be towed at a constant depth of 1.07 meters (m) below the sea surface. As transmitted acoustic energy intersects density boundaries, such as the seafloor or sub-surface sediment layers, some energy is reflected back toward the transducer, received, and recorded by a Personal Computer (PC)-based seismic acquisition system. This process is repeated at regular time intervals (for example, 0.125 seconds (s)), and returned energy is recorded for a specific duration (for example, 50 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y rev. 0 format (Barry and others, 1975); the first 3,200 bytes of the card image header are in American Standard Code for Information Interchange (ASCII) format instead of Extended Binary Coded Decimal Interchange Code (EBCDIC) format. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2010). See the How To Download SEG Y Data page for download instructions. The printable profiles provided here are GIF images that were processed and gained using SU software, and they can be viewed from the Profiles page or from links located on the trackline maps; refer to the Software page for links to example SU processing scripts. The SEG Y files are available on the DVD version of this report or on the Web, downloadable via the USGS Coastal and Marine Geoscience Data System (http://cmgds.marine.usgs.gov). The data are also available for viewing using GeoMapApp (http://www.geomapapp.org) and Virtual Ocean (http://www.virtualocean.org) multi-platform open source software.

Development and validation of hydroacoustic monitoring concepts for the coastal German Bight (SE North Sea)

NASA Astrophysics Data System (ADS)

Mielck, Finn; Hass, H. Christian; Holler, Peter; Bartholomä, Alexander; Neumann, Andreas; Kröncke, Ingrid; Reimers, Hans-Christian; Capperucci, Ruggero

2016-04-01

The joint research project WIMO (Wissenschaftliche Monitoringkonzepte für die Deutsche Bucht/Scientific Monitoring Concepts for the German Bight, NE North Sea) aims at providing methods for detection and analysis of seabed habitats using modern remote sensing techniques. Our subproject focuses on hydroacoustic techniques in order to gain information about seafloor environments and sediment dynamics. In a timeframe of four years, several key areas in the German Bight were repeatedly observed using different hydroacoustic gear (i. e. sidescan sonars, single/multibeam echo sounders and sub-bottom profilers). In order to ground-truth the acoustic data, hundreds of grab samples and underwater videos were taken. With these techniques it is possible to distinguish between different seafloor habitats, which range from muddy to sandy seafloors (esp. near the barrier islands) to rugged or vegetated/populated reefs around Helgoland. The conducted monitoring program revealed seasonal changes regarding the abundance of the sand mason worm (Lanice conchilega) and the brittle star (Amphiora filiformis) as well as ongoing sedimentary processes driven by tidal currents and wind/storms. It was also possible to determine relationships between sediment characteristics and benthos in some key areas. An essential part of our project included a comparison between the datasets obtained with different hydroacoustic devices, configurations, and evaluation methods in the same study areas. The investigation reveals that there could be distinct differences in interpreting the data and hence in the determination of prevailing seafloor habitats, especially in very heterogeneous areas and at transition zones between the habitats. Therefore, it is recommended to employ more than one hydroacoustic system (preferably a singlebeam device combined with a wide-swath sonar system) synchronously during a survey in order to gain more reliable and detailed information about the seafloor environments. The results of this project study form an important contribution to ongoing and future projects, in particular with regard to the technical configuration of the sonar systems, the workflows concerning post-processing and validation of the hydroacoustic data as well as the monitoring concepts that were worked out. However, a full automation of these workflows is not feasible. For the time being, measurements, post-processing and data evaluation still need supervision and expert knowledge.

Deep-sea benthic habitats modeling and mapping in a NE Atlantic seamount (Galicia Bank)

NASA Astrophysics Data System (ADS)

Serrano, A.; González-Irusta, J. M.; Punzón, A.; García-Alegre, A.; Lourido, A.; Ríos, P.; Blanco, M.; Gómez-Ballesteros, M.; Druet, M.; Cristobo, J.; Cartes, J. E.

2017-08-01

This study presents the results of seafloor habitat identification and mapping of a NE Atlantic deep seamount. An ;assemble first, predict later; approach has been followed to identify and map the benthic habitats of the Galicia Bank (NW Iberian). Biotic patterns inferred from the survey data have been used to drive the definition of benthic assemblages using multivariate tools. Eight assemblages, four hard substrates and four sedimentary ones, have been described from a matrix of structural species. Distribution of these assemblages was correlated with environmental factors (multibeam and backscatter data) using binomial GAMs. Finally, the distribution model of each assemblage was applied to produce continuous maps and pooled in a final map with the distribution of the main benthic habitats. Depth and substrate type are key factors when determining soft bottom communities, whereas rocky habitat distribution is mainly explained by rock slope and orientation. Enrichment by northern water masses (LSW) arriving to GB and possible zooplankton biomass increase at vertical-steep walls by ;bottom trapping; can explain the higher diversity of habitat providing filter-feeders at slope rocky breaks. These results concerning vulnerable species and habitats, such as Lophelia and Madrepora communities and black and bamboo coral aggregations were the basis of the Spanish proposal of inclusion within the Natura 2000 network. The aim of the present study was to establish the scientific criteria needed for managing and protecting those environmental values.

Size and Carbon Content of Sub-seafloor Microbial Cells at Landsort Deep, Baltic Sea

PubMed Central

Braun, Stefan; Morono, Yuki; Littmann, Sten; Kuypers, Marcel; Aslan, Hüsnü; Dong, Mingdong; Jørgensen, Bo B.; Lomstein, Bente Aa.

2016-01-01

The discovery of a microbial ecosystem in ocean sediments has evoked interest in life under extreme energy limitation and its role in global element cycling. However, fundamental parameters such as the size and the amount of biomass of sub-seafloor microbial cells are poorly constrained. Here we determined the volume and the carbon content of microbial cells from a marine sediment drill core retrieved by the Integrated Ocean Drilling Program (IODP), Expedition 347, at Landsort Deep, Baltic Sea. To determine their shape and volume, cells were separated from the sediment matrix by multi-layer density centrifugation and visualized via epifluorescence microscopy (FM) and scanning electron microscopy (SEM). Total cell-carbon was calculated from amino acid-carbon, which was analyzed by high-performance liquid chromatography (HPLC) after cells had been purified by fluorescence-activated cell sorting (FACS). The majority of microbial cells in the sediment have coccoid or slightly elongated morphology. From the sediment surface to the deepest investigated sample (~60 m below the seafloor), the cell volume of both coccoid and elongated cells decreased by an order of magnitude from ~0.05 to 0.005 μm3. The cell-specific carbon content was 19–31 fg C cell−1, which is at the lower end of previous estimates that were used for global estimates of microbial biomass. The cell-specific carbon density increased with sediment depth from about 200 to 1000 fg C μm−3, suggesting that cells decrease their water content and grow small cell sizes as adaptation to the long-term subsistence at very low energy availability in the deep biosphere. We present for the first time depth-related data on the cell volume and carbon content of sedimentary microbial cells buried down to 60 m below the seafloor. Our data enable estimates of volume- and biomass-specific cellular rates of energy metabolism in the deep biosphere and will improve global estimates of microbial biomass. PMID:27630628

A Comparison between Oceanographic Parameters and Seafloor Pressures; Measured, Theoretical and Modelled, and Terrestrial Seismic Data

NASA Astrophysics Data System (ADS)

Donne, Sarah; Bean, Christopher; Craig, David; Dias, Frederic; Christodoulides, Paul

2016-04-01

Microseisms are continuous seismic vibrations which propagate mainly as surface Rayleigh and Love waves. They are generated by the Earth's oceans and there are two main types; primary and secondary microseisms. Primary microseisms are generated through the interaction of travelling surface gravity ocean waves with the seafloor in shallow waters relative to the wavelength of the ocean wave. Secondary microseisms, on the other hand are generated when two opposing wave trains interact and a non-linear second order effect produces a pressure fluctuation which is depth independent. The conditions necessary to produce secondary microseisms are presented in Longuet-Higgins (1950) through the interaction of two travelling waves with the same wave period and which interact at an angle of 180 degrees. Equivalent surface pressure density (p2l) is modelled using the numerical ocean wave model Wavewatch III and this term is considered as the microseism source term. This work presents an investigation of the theoretical second order pressures generated through the interaction of travelling waves with varying wave amplitude, period and angle of incidence. Predicted seafloor pressures calculated off the Southwest coast of Ireland are compared with terrestrially recorded microseism records, measured seafloor pressures and oceanographic parameters. The work presented in this study suggests that a broad set of sea states can generate second order seafloor pressures that are consistent with seafloor pressure measurements. Local seismic arrays throughout Ireland allow us to investigate the temporal covariance of these seafloor pressures with microseism source locations.

GeoSEA: Geodetic Earthquake Observatory on the Seafloor

NASA Astrophysics Data System (ADS)

Kopp, Heidrun; Lange, Dietrich; Flueh, Ernst R.; Petersen, Florian; Behrmann, Jan-Hinrich; Devey, Colin

2014-05-01

Space geodetic observations of crustal deformation have contributed greatly to our understanding of plate tectonic processes in general, and plate subduction in particular. Measurements of interseismic strain have documented the active accumulation of strain, and subsequent strain release during earthquakes. However, techniques such as GPS cannot be applied below the water surface because the electromagnetic energy is strongly attenuated in the water column. Evidence suggests that much of the elastic strain build up and release (and particularly that responsible for both tsunami generation and giant earthquakes) occurs offshore. To quantify strain accumulation and assess the resultant hazard potential we urgently need systems to resolve seafloor crustal deformation. Here we report on first results of sea trials of a newly implemented seafloor geodesy array. The GeoSEA (Geodetic Earthquake Observatory on the Seafloor) array consists of a seafloor transponder network comprising 35 units and a wave glider acting as a surface unit (GeoSURF) to ensure satellite correspondence, data transfer and monitor system health. Seafloor displacement occurs in the horizontal (x,y) and vertical direction (z). The vertical displacement is measured by monitoring pressure variations at the seafloor. Horizontal seafloor displacement can be measured either using an acoustic/GPS combination to provide absolute positioning (requiring a suitably equipped vessel to perform repeated cruises to provide the GPS fixes) or by long-term acoustic telemetry between different beacons fixed on the seafloor to determine relative distances by using the travel time observations to each other, which is the technique tested during our short sea trials. For horizontal direct path measurements, the system utilizes acoustic ranging techniques with a ranging precision better than 15 mm and long term stability over 2 km distances. Vertical motion is obtained from pressure gauges. Integrated inclinometers monitor station settlement in two horizontal directions. Data can be acquired and recorded autonomously subsea without system or human intervention for up to 6 years. These data can then be recovered via the integrated high-speed acoustic telemetry link without recovering the seafloor units. When requested to do so, the stored data will be transmitted wirelessly up to the sea surface to the GeoSURF wave glider for onward transmission via a satellite link. Targets for GeoSEA are the marine sector of the North Anatolian fault zone in the Marmara Sea, where a joint French-German array will be installed in late 2014 as well as the central sector of the South America - Nazca convergent plate boundary along the Iquique segment, offshore Northern Chile. Here, the GeoSEA array will be installed in late 2015 to monitor crustal deformation. Mobile autonomous seafloor arrays for continuous measurement of active seafloor deformation in hazard zones have the potential to lead to transformative discoveries of plate boundary/fault zone tectonic processes and address a novel element of marine geophysical research.

Discriminating different type waves from pressure and ground motion observation in the seafloor by DONET cabled observation network.

NASA Astrophysics Data System (ADS)

Araki, E.; Kawaguchi, K.; Kaneda, Y.

2011-12-01

We developed and deployed seafloor cabled observatory called "Dense Ocean-floor Network for Earthquake and Tsunamis (DONET)" in the Nankai Trough, south of Japan. The main purpose of the DONET network is to observe large earthquake such as Tonankai earthquake in the deployed seafloor and associate Tsunamis in real-time to help disaster mitigation, and as well to monitor inter-seismic crustal activities such as micro earthquakes, very low frequency earthquakes, and slower crustal deformation. In each DONET seafloor observatory, high-sensitive broadband set of instruments for seismic and seafloor pressure monitoring, consisted from Guralp CMG3T broadband seismometer, Metrozet TSA100S accelerometer, Paroscientific 8B7000-2 pressure gauge, a deep-sea differential pressure gauge, a hydrophone, and a seawater thermometer, are installed. The density of seafloor observatories are 20 observatories distributed in 15-30 km interval which is optimized for monitoring of events in the plate boundary beneath the network. DONET may be regarded as a large-scale, high sensitive high density seismic array for monitoring teleseismic events in the Philippine Sea and the Pacific Ocean. The DONET seafloor observatories are situated in wide range of seafloor depth between 1800m and 4500m, from the seafloor basin about 50 km off Japanese Island through the slope of accerecionary prism to the deep trench axis 150 km off the coast, that may also regarded as a vertical array in the 4.5km thick ocean. This variation of depths helps identify T-phases from the array record. In data analysis, it is necessary to identify propagation mode of each observed wave which may often be mixed together. In our design of DONET observation system, we took care to help identification of seismic phase by obtaining both ground motion and seafloor pressure in the same location. This is simply achieved by combining seafloor pressure gauges and seismometer in a single observatory package, but care was taken to observe both in the similar level of sensitivity and dynamic range in wide frequencies from near DC to over 100 Hz. In the case of DONET, the broadband seismometer and the differential pressure gauge have similar level of sensitivity in 0.005 - 10 Hz, and similarly the accelerometer and the hydrophone cover between 1-100Hz, in total covering most frequencies of our interest, 0.005 Hz to 100 Hz. With both ground motion and seafloor pressure measurement, we may distinguish types of waves relatively easily, and it is also possible to filter particular types of waves from the array dataset to help our data analysis. For example, it has been commonly practiced to distinguish up-going and down-going seismic phases from pressure and ground motion, but this is relatively difficult only with sparse seismometer array. This technique may also be applied to correct teleseismic record with sea surface reflection in receiver function analysis for exploring deep crustal structure.

Interactive Geophysical Mapping on the Web

NASA Astrophysics Data System (ADS)

Meertens, C.; Hamburger, M.; Estey, L.; Weingroff, M.; Deardorff, R.; Holt, W.

2002-12-01

We have developed a set of interactive, web-based map utilities that make geophysical results accessible to a large number and variety of users. These tools provide access to pre-determined map regions via a simple Html/JavaScript interface or to user-selectable areas using a Java interface to a Generic Mapping Tools (GMT) engine. Users can access a variety of maps, satellite images, and geophysical data at a range of spatial scales for the earth and other planets of the solar system. Developed initially by UNAVCO for study of global-scale geodynamic processes, users can choose from a variety of base maps (satellite mosaics, global topography, geoid, sea-floor age, strain rate and seismic hazard maps, and others) and can then add a number of geographic and geophysical overlays for example coastlines, political boundaries, rivers and lakes, NEIC earthquake and volcano locations, stress axes, and observed and model plate motion and deformation velocity vectors representing a compilation of 2933 geodetic measurements from around the world. The software design is flexible allowing for construction of special editions for different target audiences. Custom maps been implemented for UNAVCO as the "Jules Verne Voyager" and "Voyager Junior", for the International Lithosphere Project's "Global Strain Rate Map", and for EarthScope Education and Outreach as "EarthScope Voyager Jr.". For the later, a number of EarthScope-specific features have been added, including locations of proposed USArray (seismic), Plate Boundary Observatory (geodetic), and San Andreas Fault Observatory at Depth sites plus detailed maps and geographically referenced examples of EarthScope-related scientific investigations. In addition, we are developing a website that incorporates background materials and curricular activities that encourage users to explore Earth processes. A cluster of map processing computers and nearly a terabyte of disk storage has been assembled to power the generation of interactive maps and provide space for a very large collection of map data. A portal to these map tools can be found at: http://jules.unavco.ucar.edu.

SeisCORK Engineering Design Study

DTIC Science & Technology

2006-05-01

Stephen, R. A., et al. (1994a), The seafloor borehole array seismic system (SEABASS) and VLF ambient noise, Marine Geophysical Researches, 16, 243...286. Stephen, R. A., et al. (1994b), The Seafloor Borehole Array Seismic System (SEABASS) and VLF Ambient Noise, Marine Geophysical Researches, 16, 243...Contents Executive Summary 4 Introduction 5 General Science Goals and Justification for Borehole Seismology in the Seafloor 6 Validating Surface Seismic

Improvement in the observation system for the GPS/A seafloor positioning

NASA Astrophysics Data System (ADS)

Fujimoto, H.; Kido, M.; Osada, Y.

2010-12-01

GPS/Acoustic seafloor positioning has become an indispensable geodetic observation for the monitoring of crustal activities near plate boundaries. There remain, however, substantial differences from GPS observation on land. Our group in Tohoku University has been working to cope with the problems under the program of the DONET, JAMSTEC.One of critical problems regarding the present GPS/A observation lies in the campaign style observation spending one or two days to measure the position of an array of acoustic transponders (PXPs) once or twice a year. It is similar to the triangulation observation on land before the age of the GPS. Chadwell et al. (2009, AGU Fall Meeting) made a step forward for this problem by carrying out a continuous GPS/A observation with a moored buoy. We are also developing a system using a moored small buoy. Precision of seafloor positioning by GPS/A is another critical problems. Considering that plate motions are several centimeters per year in most cases, precision of a few centimeters by GPS/A is a big difference from a few millimeters by GPS on land. We estimate that lateral variations in the sound velocity in the ocean can be a key to improve the precision in the positioning and to reduce the required time for the measurement, we have tried to estimate the lateral variations in the acoustic velocity by using 4-5 PXPs (Kido et al., 2006; Kido et al., this meeting). Long-term attitude stability of the position of a PXP deployed on thick sediment has been a basic problem in the GPS/A observation. While a pillar of a GPS antenna for an observation point is set up firmly on the ground, a PXP is deployed on the seafloor after a free fall from the sea surface. It is a serious problem to detect coseismic crustal movements on the seafloor. M7-class earthquakes occurred in 2004 off Kii Peninsula, Central Japan, gave us an opportunity to study the problem. By using an ROV (remotely operated vehicle), we visually observed ten PXPs in 2006, seven of which had been used to detect coseismic seafloor crustal movements of 20 cm or more as was reported by Kido et al. (2006) and by Tadokoro et al. (2006). The diving survey confirmed that all of the seven PXPs stood stably on the flat sediment, no effects of the earthquakes being recognized. Even if slight tilts of the PXPs were caused by the earthquakes, the effect on the seafloor positioning by GPS/A was estimated to be 1 cm or less (Fujimoto et al., in press). A PXP has been deployed for a permanent (actually several to 10 years) use. Therefore, it is not equipped with a recovery system as is used for an ocean bottom seismometers or pressure recorders. From our experience we have often wished to retrieve a PXP to revise its performance, to slightly change its position, or to reuse it after the battery is exhausted. We tried to use a long-life acoustic recovery system for three PXPs. We successfully recovered all of them 4.5 years after their deployment.

Engineering concepts for the placement of wastes on the abyssal seafloor

NASA Astrophysics Data System (ADS)

Valent, Philip J.; Palowitch, Andrew W.; Young, David K.

1998-05-01

The Naval Research Laboratory (NRL), with industry and academic participation, has completed a study of the concept of isolating industrial wastes (i.e., sewage sludge, fly ash from municipal incinerators, and dredged material) on the abyssal seafloor. This paper presents results of the technical and economic assessment of this waste management concept. The results of the environmental impacts portion of the study are presented in a companion paper. The technical assessment began with identification of 128 patents addressing waste disposal in the ocean. From these 128 patents, five methods for transporting wastes through the water column and emplacing wastes within an easily monitored area on the abyssal seafloor were synthesized for technical assessment. In one method waste is lowered to the seafloor in a bucket of 190 m 3. In a second method waste is pumped down to the seafloor in pipes, 1.37 m in diameter and 6100 m in length. In a third method waste is free-fallen from the ocean surface in 380-m 3 geosynthetic fabric containers (GFCs). In the fourth and fifth methods, waste is carried to near the seafloor in GFCs transported in (a) a 20,000 metric ton displacement (loaded), unpowered, unmanned submersible glider, or (b) a 2085 metric ton displacement (loaded) disk-shaped transporter traversing to and from the seafloor much like an untethered elevator. In the last two methods the transporter releases the GFCs to free-fall the last few hundred meters to the seafloor. Two reliability analyses, a Fault Tree Analysis (FTA), and a Failure Modes, Effects, and Criticality Analysis (FMECA), showed that the free-fall GFC method posed the least overall relative risk, provided that fabric container and transporter designs eliminate the potential for tearing of the containers on release from the surface transporter. Of the five methods, the three GFC methods were shown to offer cost-effective waste management options when compared with present-day waste management techniques in higher-priced areas, such as the New York-New Jersey area. In conclusion, the abyssal seafloor waste isolation concept is technically feasible and cost-effective for many waste sources.

ROV seafloor surveys combining 5-cm lateral resolution multibeam bathymetry with color stereo photographic imagery

NASA Astrophysics Data System (ADS)

Caress, D. W.; Hobson, B.; Thomas, H. J.; Henthorn, R.; Martin, E. J.; Bird, L.; Rock, S. M.; Risi, M.; Padial, J. A.

2013-12-01

The Monterey Bay Aquarium Research Institute is developing a low altitude, high-resolution seafloor mapping capability that combines multibeam sonar with stereo photographic imagery. The goal is to obtain spatially quantitative, repeatable renderings of the seafloor with fidelity at scales of 5 cm or better from altitudes of 2-3 m. The initial test surveys using this sensor system are being conducted from a remotely operated vehicle (ROV). Ultimately we intend to field this survey system from an autonomous underwater vehicle (AUV). This presentation focuses on the current sensor configuration, methods for data processing, and results from recent test surveys. Bathymetry data are collected using a 400-kHz Reson 7125 multibeam sonar. This configuration produces 512 beams across a 135° wide swath; each beam has a 0.5° acrosstrack by 1.0° alongtrack angular width. At a 2-m altitude, the nadir beams have a 1.7-cm acrosstrack and 3.5 cm alongtrack footprint. Dual Allied Vision Technology GX1920 2.8 Mpixel color cameras provide color stereo photography of the seafloor. The camera housings have been fitted with corrective optics achieving a 90° field of view through a dome port. Illumination is provided by dual 100J xenon strobes. Position, depth, and attitude data are provided by a Kearfott SeaDevil Inertial Navigation System (INS) integrated with a 300 kHz RDI Doppler velocity log (DVL). A separate Paroscientific pressure sensor is mounted adjacent to the INS. The INS Kalman filter is aided by the DVL velocity and pressure data, achieving navigational drift rates less than 0.05% of the distance traveled during surveys. The sensors are mounted onto a toolsled fitted below MBARI's ROV Doc Ricketts with the sonars, cameras and strobes all pointed vertically down. During surveys the ROV flies at a 2-m altitude at speeds of 0.1-0.2 m/s. During a four-day R/V Western Flyer cruise in June 2013, we successfully collected multibeam and camera survey data from a 2-m altitude at three sites in the deep Monterey Canyon axis. The surveys lines were spaced 1.5-m and were flown at speeds of 0.1-0.2-m/s while the sonars pinged at 3 Hz and the cameras operated at 0.5 Hz. All three low-altitude surveys are at ~2850 m depth and lie within the 1-m lateral resolution bathymetry of a 2009, 50-m altitude MBARI Mapping AUV survey. Site 1 has the greatest topography, being centered on a 15 m diameter, 7 m high flat boulder surrounded by an 80 m diameter, 6 m deep scour pit. Site 2 is located within a field of ~3-m high apparent sediment waves with ~80-m wavelengths. Site 0 is flat and includes chemosynthetic clam communities. At a 2 m altitude, the multibeam bathymetry swath is more than 7 m wide and the camera images are 4 m wide. Following navigation adjustment to match features in overlapping bathymetry swaths, we achieve 5-cm lateral resolution topography overlain with ~1-mm scale photographic imagery.

Evolution and Submarine Landslide Potential of Monterey Canyon Head, Offshore Central California

NASA Astrophysics Data System (ADS)

Maier, K. L.; Johnson, S. Y.; Hart, P. E.; Hartwell, S. R.

2016-12-01

Monterey Canyon, offshore central California, incises the shelf from near the shoreline to 30 km seaward where axial water depths approach 2,000 m. It is one of the world's most studied submarine canyons, yet debate continues concerning its age, formation, and associated geologic hazards. To address these issues, the USGS, with partial support from the California Seafloor Mapping Program, collected hundreds of kilometers of high-resolution, mini-sparker, single-channel (2009 and 2011 surveys) and multichannel (2015 survey) seismic-reflection profiles near the canyon head. The seismic data were combined with multibeam bathymetry to generate a geologic map of the proximal canyon, which delineates numerous faults and compound submarine landslide headwall scarps (covering up to 4 km2) along canyon walls. Seismic-reflection data reveal a massive ( 100 km2 lateral extent) paleochannel cut-and-fill complex underlying the proximal canyon. These subsurface cut-and-fill deposits span both sides of the relatively narrow modern canyon head, crop out in canyon walls, and incise into Purisima Formation (late Miocene and Pliocene) bedrock to depths of up to 0.3 s two-way travel time ( 240 m) below the modern shelf. We propose that the paleochannel complex represents previous locations of a migrating canyon head, and attribute its origin to multiple alternating cycles of fluvial and submarine canyon erosion and deposition linked to fluctuating sea levels. Thus, the canyon head imaged in modern bathymetry is a relatively young feature, perhaps forming in the last 20,000 years of sea-level rise. The paleocanyon deposits are significantly less consolidated than bedrock in deeper canyon walls, and therefore, are probably more prone to submarine landsliding. Nearby mapped faults occur within the active, distributed, San Andreas fault system, and earthquake-generated strong ground motions are likely triggers for past and future submarine landslides and potential associated tsunamis.

Ensonifying Change: Repeat Ultra-High-Resolution Surveys in Monterey Canyon before and after Passage of a Turbidity Current

NASA Astrophysics Data System (ADS)

Wolfson-Schwehr, M.; Paull, C. K.; Caress, D. W.; Carvajal, C.; Thomas, H. J.; Maier, K. L.; Parsons, D. R.; Simmons, S.

2017-12-01

Turbidity currents are one of the primary means of global sediment transport, yet our understanding of how they interact with the seafloor is hindered by the limited number of direct measurements. The Coordinated Canyon Experiment (CCE; October 2015 - April 2017) has made great strides in addressing this issue by providing direct measurements of turbidity currents and detailed observations of the resulting seafloor change in Monterey Canyon, offshore California. Here we focus on a section of the canyon at 1850-m water depth, where a Seafloor Instrument Node (SIN) recorded passage of three turbidity currents using a range of sensors, including three upward-looking acoustic Doppler current profilers. The fastest event at this site had a maximum velocity of 2.8 m/s, and dragged the 430-Kg SIN 26 m down-canyon. Repeat mapping surveys were conducted four times during the CCE, utilizing a prototype ultra-high-resolution mapping system mounted on the ROV Doc Ricketts. The survey platform hosts a 400-kHz Reson 7125 multibeam sonar, a 3DatDepth SL1 subsea LiDAR, two stereo color cameras, and a Kearfott SeaDevil INS. At a survey altitude of 2.5 m above the bed, the system provides remarkable 5-cm resolution multibeam bathymetry, 1-cm resolution LiDAR bathymetry, and 2-mm resolution photomosaics, and can cover a 100-m2 survey area. Surveys of the SIN site prior to and after the fastest event show areas of net deposition/erosion of 60 cm and 20 cm, respectively. Net deposition occurred in the topographic lows between bedforms, while erosion was focused on the bedform crests. At the end of the experiment, transects of sediment cores were taken by ROV within areas of net deposition. The cores show a variety of sedimentary facies, including muds, sands, gravel, and organic rich layers. Gravel layers have sharp erosive bases. The repeat surveys document the dynamic nature of flute-like scours as the flow events erode and deposit material along the canyon floor, as well as the evolution of scours between events. While the scours may represent a small component of sediment transport within the canyon, their multi-generational structure indicates a complex interaction of scour processes along the canyon bed. These data provide a new means to understanding the detailed changes in canyon floor morphology and sedimentology at the event scale.

Identification of potential sites for deep-ocean waste isolation with a geographic site-selection model

NASA Astrophysics Data System (ADS)

Fleischer, Peter; Bowles, Frederick A.; Richardson, Michael D.

1998-05-01

Identification of optimal sites for the isolation of waste on the abyssal seafloor was performed with two approaches: by the traditional method of map overlays of relevant attributes, and by a specially developed, automated Site-Selection Model (SSM). Five initial, Surrogate Sites, identified with the map-overlay approach, were then compared with the more rigorously produced scores from the SSM. The SSM, a process for optimization of site locations, accepts subjective, expert-based judgments and transforms them into a quantitative, reproducible, and documented product. The SSM is adaptable to any siting scenario. Forty-one factors relevant to the isolation scenario, including 21 weightable factors having a total of 123 scorable categories, have been entered into the SSM. Factors are grouped under project definition, unique environments, anthropogenic, geologic, biologic, weather, oceanographic and distance criteria. The factor scores are linked to a georeferenced database array of all factors, corresponding to 1°×1° latitude-longitude squares. The SSM includes a total of 2241 one-degree squares within 1000 n.m. of the U.S. coasts, including the western North Atlantic, the Gulf of Mexico, and the eastern North Pacific. Under a carefully weighted and scored scenario of isolation, the most favorable sites identified with the SSM are on the Hatteras and Nares Abyssal Plains in the Atlantic. High-scoring sites are also located in the Pacific abyssal hills province between the Murray and Molokai Fracture Zones. Acceptable 1° squares in the Gulf of Mexico are few and of lower quality, with the optimum location on the northern Sigsbee Abyssal Plain. Two of the five Surrogate Site locations, on the Hatteras and Sigsbee Abyssal Plains, correspond to the best SSM sites in each ocean area. Two Pacific and a second Atlantic Surrogate Site are located in low-scoring regions or excluded by the SSM. Site-selection results from the SSM, although robust, are an initial attempt to quantify the site-selection process. The SSM database exposes a significant lack of high-quality information for many areally mappable attributes on the abyssal seafloor, particularly bottom-current speed and measures of biologic productivity and flux. Terminologies and classifications of some measures, such as sediment types, suffer from parochialism and vary by ocean. Considerable research is needed even for a broad understanding of the environmental measures required to make sound societal decisions about use of the abyssal seafloor for disposal or other purposes.

Evolution of seafloor spreading rate based on Ar-40 degassing history

NASA Astrophysics Data System (ADS)

Tajika, Eiichi; Matsui, Takafumi

1993-05-01

A new degassing model of Ar-40 coupled with thermal evolution of the mantle is constructed to constrain the temporal variation of seafloor spreading rate. In this model, we take into account the effects of elemental partition and solubility during melt generation and bubble formation, and changes in both seafloor spreading rate and melt generation depth in the mantle. It is suggested that the seafloor spreading rate would have been almost the same as that of today over the history of the earth in order to explain the present amount of Ar-40 in the atmosphere. This result may also imply the mild degassing history of volatiles from the mantle.

ASW Research at WHOI and SIO

DTIC Science & Technology

2016-06-07

North Pacific targeting ocean-acoustic bottom interaction, deep seafloor arri vals and bottom diffracted surface refl ected acoustic paths. We...These arrivals were named Deep Sea Floor Arrivals (DSF As). SIO (Worcester) and WHOI (Kemp) provided the near-seafloor DVLA. The OBSJP (Ocean...Andrew, R. K. , Mercer, J . A. , Colosi, J. A. , and Howe, B. M. (2012). "Analysis of Deep Seafloor Arrivals Observed on NPAL04," WHO! Technical Report

Unlocking the Treasures of the Ocean: Current Assessment and Future Perspectives of Seafloor Resources (C.F Gauss Lecture)

NASA Astrophysics Data System (ADS)

Jegen, Marion

2016-04-01

Oceans cover 70% of the Earth's surface, and there is reason to believe that the wealth of mineral and carbon resources on the seafloor is similar to deposits on land. While off-shore energy resources such as oil and gas are nowadays regarded as conventional, energy resources in form of methane hydrates and seafloor mineral deposits are yet unconventional and at best marginally economic. However, taking into account global population growth, geopolitics and technological development (both in terms of increasing industrialization and possibility to explore and mine seafloor resources), these resources might play a more fundamental role in the future. Resource assessment and understanding of the geological formation process of resources are topics in marine geosciences with broad relevance to society. The lecture presents an overview of the geophysical exploration of the seafloor and its resource potential. Starting from the link of physical parameter anomalies associated with resources, I will explore marine technological developments on how to sense them remotely from the seafloor. Also the question will be addressed of how well we can actually quantify the amount of resources from geophysical data. The process will be illustrated based on theoretical work as well as case studies from around the world.

Airborne electromagnetic detection of shallow seafloor topographic features, including resolution of multiple sub-parallel seafloor ridges

NASA Astrophysics Data System (ADS)

Vrbancich, Julian; Boyd, Graham

2014-05-01

The HoistEM helicopter time-domain electromagnetic (TEM) system was flown over waters in Backstairs Passage, South Australia, in 2003 to test the bathymetric accuracy and hence the ability to resolve seafloor structure in shallow and deeper waters (extending to ~40 m depth) that contain interesting seafloor topography. The topography that forms a rock peak (South Page) in the form of a mini-seamount that barely rises above the water surface was accurately delineated along its ridge from the start of its base (where the seafloor is relatively flat) in ~30 m water depth to its peak at the water surface, after an empirical correction was applied to the data to account for imperfect system calibration, consistent with earlier studies using the same HoistEM system. A much smaller submerged feature (Threshold Bank) of ~9 m peak height located in waters of 35 to 40 m depth was also accurately delineated. These observations when checked against known water depths in these two regions showed that the airborne TEM system, following empirical data correction, was effectively operating correctly. The third and most important component of the survey was flown over the Yatala Shoals region that includes a series of sub-parallel seafloor ridges (resembling large sandwaves rising up to ~20 m from the seafloor) that branch out and gradually decrease in height as the ridges spread out across the seafloor. These sub-parallel ridges provide an interesting topography because the interpreted water depths obtained from 1D inversion of TEM data highlight the limitations of the EM footprint size in resolving both the separation between the ridges (which vary up to ~300 m) and the height of individual ridges (which vary up to ~20 m), and possibly also the limitations of assuming a 1D model in areas where the topography is quasi-2D/3D.

Design of a Data Distribution Core Model for Seafloor Observatories in East China Sea

NASA Astrophysics Data System (ADS)

Chen, H.; Qin, R.; Xu, H.

2017-12-01

High loadings of nutrients and pollutants from agriculture, industries and city waste waters are carried by Changjiang (Yangtze) River and transformed into the foodweb in the river freshwater plume. Understanding these transport and transformation processes is essential for the ecosystem protection, fisheries resources management, seafood safety and human health. As Xiaoqushan Seafloor Observatory and Zhujiajian Seafloor Observatory built in East China Sea, it is an opportunity and a new way for the research of Changjiang River plume. Data collected by seafloor observatory should be accessed conveniently by end users in real time or near real time, which can make it play a better role. Therefore, data distribution is one of major issues for seafloor observatory characterized by long term, real time, high resolution and continuous observation. This study describes a Data Distribution core Model for Seafloor Observatories in East China Sea (ESDDM) containing Data Acquisition Module (DAM), Data Interpretation Module (DIM), Data Transmission Module (DTM) and Data Storage Module (DTM), which enables acquiring, interpreting, transmitting and storing various types of data in real time. A Data Distribution Model Makeup Language (DDML) based on XML is designed to enhance the expansibility and flexibility of the system implemented by ESDDM. Network sniffer is used to acquire data by IP address and port number in DAM promising to release the operating pressure of junction boxes. Data interface, core data processing plugins and common libraries consist of DIM helping it interpret data in a hot swapping way. DTM is an external module in ESDDM transmitting designated raw data packets to Secondary Receiver Terminal. The technology of database connection pool used in DSM facilitates the efficiency of large volumes of continuous data storage. Given a successful scenario in Zhujiajian Seafloor Observatory, the protosystem based on ESDDM running up to 1500h provides a reference for other seafloor observatories in data distribution service.

Site Survey of the Martha's Vineyard Coastal Observatory: Backscatter, Grain Size and Temporal Evolution of Rippled Scour Depressions

NASA Astrophysics Data System (ADS)

Goff, J. A.; Mayer, L.; Schwab, B.; Traykovski, P.; Wilkins, R.; Jenkins, C.; Kraft, B.; Evans, R.; Buynevich, I.

2002-12-01

The Office of Naval Research's Mine Burial Prediction program has chosen the Martha's Vineyard Coastal Observatory (MVCO) as a natural laboratory for experimental observations of object burial by nearshore processes (e.g., bedform migration, scour). In support of this program, the MVCO has been subject to an intensive site survey program, involving, since early 2001: (1) three swath backscatter and/or bathymetry surveys; (2) three high resolution seismic surveys; (3) ultra-high resolution sector-scanning sonar on pole mounts; (4) in situ geotechnical (velocity and resistivity) measurements, (5) grab sampling, and (6) vibracoring. These efforts are concentrated in water depths between ~8 and 18 m, centered on the site of the MVCO permanent node at ~12 m water depth Rippled scour depressions (RSDs) are pervasive within the MVCO. RSDs are ~shore-perpendicular bands of coarse sands separated by overlying fine sands. The term itself implies that the coarse sands are heavily rippled (~0.5-1 m wavelength, ~0.1 m amplitude) and slightly depressed relative to the fine sands which, in the MVCO, are generally just a few 10's of cm thick. The RSDs are clearly evident on sidescan data as bands of high backscatter. For the most part, grain size measurements confirm a strong positive correspondence between mean grain size and backscatter intensity. However, a critical exception is seen in deeper water where, well within the area of fine sands, backscatter increases noticeably as mean grain size decreases from ~150μ to ~130μ. Topographic expression related to the RSDs is confined primarily to evident scour depressions at the edges. The RSDs are highly asymmetric: backscatter is higher, the coarse/fine transition is more sharply defined, and the scour depression is deeper on one side than the other. This pattern changes within the survey: the higher backscatter edge is always to the west in the western part of the survey, and vice versa to the east. The strike of the RSDs also changes, from being slightly east of north in the western part of the survey to slightly west of north to the east. The MVCO site survey work establishes a baseline set of observations against which physical changes in the seafloor with time can be measured. Early evidence of significant change has been provided by comparison of the first two sidescan surveys, which indicates a shift in the RSD boundaries by as much as 50 m between February and September of 2001. Continued seafloor evolution is evidenced by the August 2002 grab sampling and sector scanning sonar. This dynamic setting will continue to be monitored by additional swath mapping and sampling in conjunction with the planned winter 2003/2004 mine burial experiment.

Seafloor Topography Estimation from Gravity Gradient Using Simulated Annealing

NASA Astrophysics Data System (ADS)

Yang, J.; Jekeli, C.; Liu, L.

2017-12-01

Inferring seafloor topography from gravimetry is an indirect yet proven and efficient means to map the ocean floor. Standard techniques rely on an approximate, linear relationship (Parker's formula) between topography and gravity. It has been reported that in the very rugged areas the discrepancies between prediction and ship soundings are very large, partly because the linear term of Parker's infinite series is dominant only in areas where the local topography is small compared with the regional topography. The validity of the linear approximation is therefore in need of analysis. In this study the nonlinear effects caused by terrain are quantified by both numerical tests and an algorithmic approach called coherency. It is shown that the nonlinear effects are more significant at higher frequencies, which suggests that estimation algorithms with nonlinear approximation in the modeled relationship between gravity gradient and topography should be developed in preparation for future high-resolution gravity gradient missions. The simulated annealing (SA) method is such an optimization technique that can process nonlinear inverse problems, and is used to estimate the seafloor topography parameters in a forward model by minimizing the difference between the observed and forward-computed vertical gravity gradients. Careful treatments like choosing suitable truncation distance, padding the vicinity of the study area with a known topography model, and using the relative cost function, are considered to improve the estimation accuracy. This study uses the gravity gradient, which is more sensitive to topography at short wavelengths than gravity anomaly. The gravity gradient data are derived from satellite altimetry, but the SA has no restrictions on data distribution, as required in Parker's infinite series model, thus enabling the use of airborne gravity gradient data, whose survey trajectories are irregular. The SA method is tested in an area of Guyots (E 156°-158° in longitude, N 20°-22° in latitude). Comparison between the estimation and ship sounding shows that half of the discrepancy is within 110 m, which improves the result from standard techniques by 32%.

Submarine Neotectonic Investigations of the Bahia Soledad Fault, off Northern Baja California Near the US - Mexico Border

NASA Astrophysics Data System (ADS)

Anderson, K.; Lundsten, E. M.; Paull, C. K.; Caress, D. W.; Thomas, H. J.; Maier, K. L.; McGann, M.; Herguera, J. C.; Gwiazda, R.; Arregui, S.; Barrientos, L. A.

2015-12-01

The Monterey Bay Aquarium Research Institute (MBARI) conducted detailed surveys at selected sites on the seafloor along the Bahia Soledad Fault offshore of Northern Baja California, Mexico, during a two-ship expedition in the spring of 2015. The Bahia Soledad Fault is a NNW-trending strike-slip fault that is likely continuous with the San Diego Trough Fault offshore of San Diego, California. Constraining the style of deformation, continuity, and slip rate along this fault system is critical to characterizing the seismic hazards to the adjacent coastal areas extending from Los Angeles to Ensenada. Detailed morphologic surveys were conducted using an autonomous underwater vehicle (AUV) to provide ultra high-resolution multibeam bathymetry (vertical precision of 0.15 m and horizontal resolution of 1.0 m). The AUV also carried a 2-10 kHz chirp sub-bottom profiler and an Edgetech 110kHz and 410kHz sidescan. The two sites along the Bahia Soledad Fault each run ~6 km along the fault with ~1.8 km wide footprint. The resulting bathymetry shows these fault zones are marked with distinct lineations that are flanked by ~1 km long elongated ridges and depressions which are interpreted to be transpressional pop-up structures and transtensional pull-apart basins up to 100 m of relief. Offset seismic reflectors that extend to near the seafloor confirm that these lineations are fault scarps. The detailed bathymetric maps and sub-bottom profiles were used to locate key sites where deformed stratigraphic horizons along the fault are within 1.5 m of the seafloor. These areas were sampled using a remotely operated vehicle (ROV) equipped with a vibracoring system capable of collecting precisely located cores that are up to 1.5 m long. The coupled use of multibeam imagery and surgically-collected stratigraphic samples will enable to constrain the frequency and timing of recent movements on this fault which will be useful to incorporated into future seismic hazard assessment.

GLORIA mosaic of the U. S. Hawaiian exclusive economic zone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Torresan, M.E.

1990-06-01

Digital long-range side-scan sonar reconnaissance surveys using GLORIA have imaged about 65% of the nearly 2.4 million km{sup 2} of the Hawaiian EEZ. The images have been processed and compiled into one mosaic that comprises the EEZ area surrounding the principal Hawaiian islands (from Hawaii to Kauai); extending on the south side of the ridge west to Kure Island, and on the north side to St. Rogatien Bank. The GLORIA images depict a variety of features that include enormous slumps and debris avalanches, lava flows, seafloor spreading fabric, fracture zones, seamounts, and unusual sedimentation patterns with more detail than previouslymore » had been possible with typical seismic reflection techniques. Some of these features were unknown before the GLORIA surveys. In particular, the GLORIA images show that the major degradational processes that affect the island and ridge areas are massive, likely tsunamogenic, blocky debris avalanches and slumps. These failures mantle the flanks of the ridge; some extending across the trough and up on to the Hawaiian Arch (up to 230 km from their sources). Over 30 failures are identified, ranging in area from 250 to > 6,000 km{sup 2} and having volumes from 500 to > 5,000 km{sup 3}. Such deposits cover > 125,000 km{sup 3} of the Ridge and adjacent seafloor. Also imaged are large Cenozoic submarine volcanic flow fields situated on the Hawaiian Arch. One such field, the North Arch field, is located north of Oahu between the Molokai and Murray fracture zones, and covers about 200,000 km{sup 2}. Prior to the GLORIA imagery only a small portion of this flow field was mapped. In addition, the imagery depicts the finer details of the Molokai and Murray fracture zones, the Cretaceous seafloor spreading fabric, and tensional faults on the Hawaiian Arch.« less

Google Earth-Based Grand Tours of the World's Ocean Basins and Marine Sediments

NASA Astrophysics Data System (ADS)

St John, K. K.; De Paor, D. G.; Suranovic, B.; Robinson, C.; Firth, J. V.; Rand, C.

2016-12-01

The GEODE project has produced a collection of Google Earth-based marine geology teaching resources that offer grand tours of the world's ocean basins and marine sediments. We use a map of oceanic crustal ages from Müller et al (2008; doi:10.1029/2007GC001743), and a set of emergent COLLADA models of IODP drill core data as a basis for a Google Earth tour introducing students to the world's ocean basins. Most students are familiar with basic seafloor spreading patterns but teaching experience suggests that few students have an appreciation of the number of abandoned ocean basins on Earth. Students also lack a valid visualization of the west Pacific where the oldest crust forms an isolated triangular patch and the ocean floor becomes younger towards the subduction zones. Our tour links geographic locations to mechanical models of rifting, seafloor spreading, subduction, and transform faulting. Google Earth's built-in earthquake and volcano data are related to ocean floor patterns. Marine sediments are explored in a Google Earth tour that draws on exemplary IODP core samples of a range of sediment types (e.g., turbidites, diatom ooze). Information and links are used to connect location to sediment type. This tour compliments a physical core kit of core catcher sections that can be employed for classroom instruction (geode.net/marine-core-kit/). At a larger scale, we use data from IMLGS to explore the distribution of the marine sediments types in the modern global ocean. More than 2,500 sites are plotted with access to original data. Students are guided to compare modern "type sections" of primary marine sediment lithologies, as well as examine site transects to address questions of bathymetric setting, ocean circulation, chemistry (e.g., CCD), and bioproductivity as influences on modern seafloor sedimentation. KMZ files, student exercises, and tips for instructors are available at geode.net/exploring-marine-sediments-using-google-earth.

Heard Island and McDonald Islands Acoustic Plumes: Split-beam Echo sounder and Deep Tow Camera Observations of Gas Seeps on the Central Kerguelen Plateau

NASA Astrophysics Data System (ADS)

Watson, S. J.; Spain, E. A.; Coffin, M. F.; Whittaker, J. M.; Fox, J. M.; Bowie, A. R.

2016-12-01

Heard and McDonald islands (HIMI) are two active volcanic edifices on the Central Kerguelen Plateau. Scientists aboard the Heard Earth-Ocean-Biosphere Interactions voyage in early 2016 explored how this volcanic activity manifests itself near HIMI. Using Simrad EK60 split-beam echo sounder and deep tow camera data from RV Investigator, we recorded the distribution of seafloor emissions, providing the first direct evidence of seabed discharge around HIMI, mapping >244 acoustic plume signals. Northeast of Heard, three distinct plume clusters are associated with bubbles (towed camera) and the largest directly overlies a sub-seafloor opaque zone (sub-bottom profiler) with >140 zones observed within 6.5 km. Large temperature anomalies did not characterize any of the acoustic plumes where temperature data were recorded. We therefore suggest that these plumes are cold methane seeps. Acoustic properties - mean volume backscattering and target strength - and morphology - height, width, depth to surface - of plumes around McDonald resembled those northeast of Heard, also suggesting gas bubbles. We observed no bubbles on extremely limited towed camera data around McDonald; however, visibility was poor. The acoustic response of the plumes at different frequencies (120 kHz vs. 18 kHz), a technique used to classify water column scatterers, differed between HIMI, suggestiing dissimilar target size (bubble radii) distributions. Environmental context and temporal characteristics of the plumes differed between HIMI. Heard plumes were concentrated on flat, sediment rich plains, whereas around McDonald plumes emanated from sea knolls and mounds with hard volcanic seafloor. The Heard plumes were consistent temporally, while the McDonald plumes varied temporally possibly related to tides or subsurface processes. Our data and analyses suggest that HIMI acoustic plumes were likely caused by gas bubbles; however, the bubbles may originate from two or more distinct processes.

Using GeoMapApp in the Classroom

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.

2017-12-01

The GeoMapApp tool has been updated with enhanced functionality that is useful in the classroom. Hosted as a service of the IEDA Facility at Columbia University, GeoMapApp (http://www.geomapapp.org) is a free resource that integrates a wide range of research-grade geoscience data in one intuitive map-based interface. It includes earthquake and volcano data, geological maps, plate tectonic data sets, and a high-resolution topography/bathymetry base map. Users can also import and analyse their own data files. Layering and transparency capabilities allow users to compare multiple data sets at once. The GeoMapApp interface presents data in its proper geospatial context, helping students more easily gain insight and understanding from the data. Simple tools for data manipulation allow students to analyse the data in different ways such as generating profiles and producing visualisations for reports. The new Save Session capability is designed to assist in the classroom: The educator saves a pre-loaded state of GeoMapApp. When shared with the class, the saved session file allows students to open GeoMapApp with exactly the same data sets loaded and the same display parameters chosen thus freeing up valuable time in which students can explore the data. In this presentation, activities related to plate tectonics will be highlighted. One activity helps students investigate plate boundaries by exploring earthquake and volcano locations. Another requires students to calculate the rate of seafloor spreading using crustal age data in various ocean basins. A third uses the GeoMapApp layering technique to explore the influence of geological forces in shaping the landscape. Educators report that using GeoMapApp in the classroom lowers the barriers to data accessibility for students; fosters an increased sense of data "ownership" - GeoMapApp presents the same data in the same tool used by researchers; allows engagement with authentic geoscience data; promotes STEM skills and exposure.

Minimum distribution of subsea ice-bearing permafrost on the US Beaufort Sea continental shelf

USGS Publications Warehouse

Brothers, Laura L.; Hart, Patrick E.; Ruppel, Carolyn D.

2012-01-01

Starting in Late Pleistocene time (~19 ka), sea level rise inundated coastal zones worldwide. On some parts of the present-day circum-Arctic continental shelf, this led to flooding and thawing of formerly subaerial permafrost and probable dissociation of associated gas hydrates. Relict permafrost has never been systematically mapped along the 700-km-long U.S. Beaufort Sea continental shelf and is often assumed to extend to ~120 m water depth, the approximate amount of sea level rise since the Late Pleistocene. Here, 5,000 km of multichannel seismic (MCS) data acquired between 1977 and 1992 were examined for high-velocity (>2.3 km s−1) refractions consistent with ice-bearing, coarse-grained sediments. Permafrost refractions were identified along <5% of the tracklines at depths of ~5 to 470 m below the seafloor. The resulting map reveals the minimum extent of subsea ice-bearing permafrost, which does not extend seaward of 30 km offshore or beyond the 20 m isobath.

Conceptual design of the CZMIL data processing system (DPS): algorithms and software for fusing lidar, hyperspectral data, and digital images

NASA Astrophysics Data System (ADS)

Park, Joong Yong; Tuell, Grady

2010-04-01

The Data Processing System (DPS) of the Coastal Zone Mapping and Imaging Lidar (CZMIL) has been designed to automatically produce a number of novel environmental products through the fusion of Lidar, spectrometer, and camera data in a single software package. These new products significantly transcend use of the system as a bathymeter, and support use of CZMIL as a complete coastal and benthic mapping tool. The DPS provides a spinning globe capability for accessing data files; automated generation of combined topographic and bathymetric point clouds; a fully-integrated manual editor and data analysis tool; automated generation of orthophoto mosaics; automated generation of reflectance data cubes from the imaging spectrometer; a coupled air-ocean spectral optimization model producing images of chlorophyll and CDOM concentrations; and a fusion based capability to produce images and classifications of the shallow water seafloor. Adopting a multitasking approach, we expect to achieve computation of the point clouds, DEMs, and reflectance images at a 1:1 processing to acquisition ratio.

Propagation and Signal Modeling

NASA Astrophysics Data System (ADS)

Jensen, Finn B.

The use of sound in the sea is ubiquitous: Apart from the military aspect of trying to detect an adversary’s mines and submarines, ship-mounted sonars measure water depth, ship speed, and the presence of fish shoals. Side-scan systems are used for mapping the bottom topography, sub-bottom profilers for getting information about the deeper layering, and other sonar systems for locating pipelines and cables on the seafloor. Sound is also used for navigating submerged vehicles, for underwater communications and for tracking marine mammals. Finally, in the realm of ‘acoustical oceanography’ and ‘ocean acoustic tomography,’ sound is used for measuring physical parameters of the ocean environment and for monitoring oceanic processes [1-6].

Multiresolution 3-D reconstruction from side-scan sonar images.

PubMed

Coiras, Enrique; Petillot, Yvan; Lane, David M

2007-02-01

In this paper, a new method for the estimation of seabed elevation maps from side-scan sonar images is presented. The side-scan image formation process is represented by a Lambertian diffuse model, which is then inverted by a multiresolution optimization procedure inspired by expectation-maximization to account for the characteristics of the imaged seafloor region. On convergence of the model, approximations for seabed reflectivity, side-scan beam pattern, and seabed altitude are obtained. The performance of the system is evaluated against a real structure of known dimensions. Reconstruction results for images acquired by different sonar sensors are presented. Applications to augmented reality for the simulation of targets in sonar imagery are also discussed.

Delineation, Characterization and Assessment of Gas-hydrates: Examples from Indian Offshore

NASA Astrophysics Data System (ADS)

Sain, K.

2017-12-01

Successful test productions in McKenzie delta, Alaska, Nankai Trough and more recently in South China Sea have provided great hopes for production of gas-hydrates in near future, and boosted national programs of many countries including India. It has been imperative to map the prospective zones of gas-hydrates and evaluate their resource potential. Hence, we have adopted a systematic strategy for the delineation, characterization and quantification of gas-hydrates based on seismic traveltime tomography, full-waveform inversion, impedance inversion, attributes computation and rock-physical modeling. The bathymetry, seafloor temperature, total organic carbon content, sediment-thickness, rate of sedimentation, geothermal gradient imply that shallow sediments of Indian deep water are good hosts for occurrences of gas-hydrates. From the analysis of multi-channel seismic (MCS) data, we have identified the Krishna-Godavari (KG), Mahanadi and Andaman basins as prospective for gas-hydrates, and their presence has been validated by drilling and coring of Indian Expeditions-01 and -02. The MCS data also shows BSR-like features in the Cauvery, Kerala-Konkan and Saurashtra basins indicating that gas-hydrates cannot be ruled out from these basins also. We shall present several approaches that have been applied to field seismic and well-log data for the detection, characterization and quantification of gas-hydrates along the Indian margin.

Distribution of foraminifera in Chincoteague Bay and the marshes of Assateague Island and the adjacent vicinity, Maryland and Virginia

USGS Publications Warehouse

Ellis, Alisha M.; Shaw, Jaimie; Osterman, Lisa E.; Smith, Christopher G.

2017-11-28

Scientists from the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center conducted a seasonal collection of estuarine, marsh, and sandy washover surface sediments from Chincoteague Bay, Tom’s Cove, and the surrounding Assateague Island and Delmarva Peninsula in March–April and October 2014, after Hurricane Sandy. Micropaleontology samples were collected as part of a complementary USGS Coastal and Marine Geology Program Sea-level and Storm Impacts on Estuarine Environments and Shorelines project study. For comparison with estuarine and overwash deposited foraminifera, a group of scientists from the USGS Woods Hole Coastal and Marine Science Center in Massachusetts collected samples offshore of Assateague Island on the inner continental shelf during a seafloor mapping study in the summer of 2014 and shipped select samples to the St. Petersburg Coastal and Marine Science Center. The micropaleontological subsamples analyzed for foraminifera at each site can be used to establish a foraminiferal baseline assemblage that takes into consideration the seasonal variability of the various species, regarding density and geographic extent, which are influenced by transient and stable environmental parameters. By understanding what parameters affect the various foraminiferal assemblages, researchers can delineate how alterations in salinity, temperature, or marsh-to-bay interactions, such as marsh erosion, might affect that assemblage.

Bottom Interaction in Ocean Acoustic Propagation

DTIC Science & Technology

2014-09-30

deep seafloor (greater than the critical depth). What is the relationship between the seismic (ground motion) noise on the seafloor and the acoustic...ocean bottom seismometers (OBSs), but were very weak on the deep vertical line array (Deep VLA), located above 750 m from the seafloor. Stephen et al...was carried out in April-May 2011 near the location of the PhilSea10 Distributed Vertical Line Array (DVLA) (Stephen et al., 2011). The second

Bottom Interaction in Ocean Acoustic Propagation

DTIC Science & Technology

2015-09-30

the deep seafloor (greater than the critical depth). What is the relationship between the seismic (ground motion) noise on the seafloor and the...ocean bottom seismometers (OBSs), but were very weak on the deep vertical line array (Deep VLA), located above 750 m from the seafloor. Stephen et...carried out in April-May 2011 near the location of the PhilSea10 Distributed Vertical Line Array (DVLA) (Stephen et al., 2011). The second experiment

Dynamic Positioning at Sea Using the Global Positioning System.

DTIC Science & Technology

1987-06-01

the Global Positioning System (GPS) acquired in Phase II of the Seafloor Benchmark Experiment on R/V Point Sur in August 1986. CPS position...data from the Global Positioning System (GPS) acquired in Phase 11 of the Seafloor Benchmark Experiment on R,:V Point Sur in August 1986. GPS position...The Seafloor Benchmark Experiment, a project of the Hydrographic Sciences Group of the Oceanography Department at the Naval Postgraduate School (NPS

Multi-channel seismic reflection database for the northern Gulf of California, a highly-sedimented oblique rift

NASA Astrophysics Data System (ADS)

Steckler, M. S.; Haxby, W.; Persaud, P.; Stock, J.; Martín-Barajas, A.; Diebold, J.; Gonzalez-Fernandez, A.; Mountain, G. S.

2003-04-01

A multi-channel seismic reflection database has been developed to give access to high-resolution MCS data collected in the northern Gulf of California in May-June 1999. This data set consists of 3500 km of high-resolution MCS data acquired by the LDEO portable 48-channel MCS system using a 600-m streamer, a 1-ms sampling interval, and CDP spacing of 6.25/12.5 m on board the B/O Ulloa, the 28-m research vessel of CICESE. The resulting images have vertical resolution on the scale of meters to depths of up to 2 km below the seafloor. In addition, 48 sonobuoys recorded to 7 sec TWTT provided refraction velocities to greater depths. The northern Gulf of California is a transitional region between the oceanic ridge transform system of the central and southern Gulf and the continental San Andreas fault system of southern California. This data images the active deformation associated with the plate boundary zone in the northern Gulf of California. Multiple parallel rifts are simultaneously active in this wide complex zone of regional extension overprinted by shearing and a high sediment influx. The public-access database makes the cruise results, which is in a US MARGINS Program focus area, available to the broader geoscience community. The database includes navigation, final stacks and images for 80 seismic lines and 48 sonobuoys. The database may be accessed with MapApp, a downloadable Java application. Java applets offer many advantages over static or scripted web pages; they permit dynamic local interaction with data sets and limit time-consuming interaction with a remote server. MapApp displays the seismic lines on a map, and provides a viewer for inspecting images of the lines. Users may select a line from a list, or by clicking on the map. Once a line is selected, a user may load the image into the viewer, or download navigation, image or SEG-Y files. The viewer includes capability to zoom in and out, scroll, stretch or shrink horizontally, reverse direction, and toggle between black-on-white and white-on-black display. The section of the line in the viewer is indicated on the map, as is the current cursor location.

South China Sea crustal thickness and lithosphere thinning from satellite gravity inversion incorporating a lithospheric thermal gravity anomaly correction

NASA Astrophysics Data System (ADS)

Kusznir, Nick; Gozzard, Simon; Alvey, Andy

2016-04-01

The distribution of ocean crust and lithosphere within the South China Sea (SCS) are controversial. Sea-floor spreading re-orientation and ridge jumps during the Oligocene-Miocene formation of the South China Sea led to the present complex distribution of oceanic crust, thinned continental crust, micro-continents and volcanic ridges. We determine Moho depth, crustal thickness and continental lithosphere thinning (1- 1/beta) for the South China Sea using a gravity inversion method which incorporates a lithosphere thermal gravity anomaly correction (Chappell & Kusznir, 2008). The gravity inversion method provides a prediction of ocean-continent transition structure and continent-ocean boundary location which is independent of ocean isochron information. A correction is required for the lithosphere thermal gravity anomaly in order to determine Moho depth accurately from gravity inversion; the elevated lithosphere geotherm of the young oceanic and rifted continental margin lithosphere of the South China Sea produces a large lithosphere thermal gravity anomaly which in places exceeds -150 mGal. The gravity anomaly inversion is carried out in the 3D spectral domain (using Parker 1972) to determine 3D Moho geometry and invokes Smith's uniqueness theorem. The gravity anomaly contribution from sediments assumes a compaction controlled sediment density increase with depth. The gravity inversion includes a parameterization of the decompression melting model of White & McKenzie (1999) to predict volcanic addition generated during continental breakup lithosphere thinning and seafloor spreading. Public domain free air gravity anomaly, bathymetry and sediment thickness data are used in this gravity inversion. Using crustal thickness and continental lithosphere thinning factor maps with superimposed shaded-relief free-air gravity anomaly, we improve the determination of pre-breakup rifted margin conjugacy, rift orientation and sea-floor spreading trajectory. SCS conjugate margins are highly asymmetric and have several striking features such as the Macclesfield Bank, Xisha Trough, Reed Bank and Dangerous Grounds. Thin continental crust is predicted extending westwards from thin oceanic crust north of Macclesfield Bank into the Quiondongnan (QDN) basin and is interpreted as being generated ahead of westward propagating sea-floor spreading most in the Oligocene. Further south, highly thinned continental crust or possibly serpentinised exhumed mantle is predicted in the Phu Khanh Basin. Ahead of the failed propagating tip of seafloor spreading, offshore southern Vietnam, thinned continental crust is predicted for the Cuu Long and Nam Con Son Basins. Crustal thicknesses from gravity inversion confirms that the southern margin of the SCS consists of fragmented blocks of thinned continental crust separated by thinner regions of continental crust that have undergone higher degrees of stretching and thinning. The Reed Bank is predicted to have a crustal thickness of 20 to 25km, similar to that of Macclesfield Bank. The Dangerous Grounds, west of the Reed Bank, are also predicted to consist of continental crust. This region has been thinned to a higher degree than the Reed Bank, with continental crustal thickness ranging between 10 and 20km thick.

An Autonomous, Low Cost Platform for Seafloor Geodetic Observations

NASA Astrophysics Data System (ADS)

Ericksen, T.; Foster, J. H.; Bingham, B. S.

2013-12-01

The high cost of acquiring geodetic data from the sea floor has limited the observations available to help us understand and model the behavior of seafloor geodetic processes. To address this problem, the Pacific GPS Facility at the University of Hawaii is developing a cost effective approach for accurately measuring short-term vertical motions of the seafloor and maintaining a continuous long-term record of seafloor pressure without the requirement for costly ship time. There is a recognized need to vastly increase our underwater geodetic observing capacity. Most of the largest recorded earthquakes and most devastating tsunamis are generated at subduction zones underwater. Similarly, many volcanoes are partly (e.g. Santorini) or completely (e.g. Loihi) submerged, and are not well observed and understood. Furthermore, landslide features ring many ocean basins, and huge debris deposits surround many volcanic oceanic islands. Our approach will lower the cost of collecting sea-floor geodetic data, reducing the barriers preventing us from acquiring the information we need to observe and understand these types of structures and provide a direct societal benefit in improving hazard assessment. The capability is being developed by equipping one of the University of Hawaii Wave Gliders with an integrated acoustic telemetry package, a dual frequency geodetic-grade Global Positioning System (GPS) receiver, processing unit, and cellular communications. The Wave Glider will interrogate high accuracy pressure sensors on the sea floor to maintain a near-continuous stream of pressure and temperature data, but seafloor pressure data includes contribution from a variety of sources and on its own may not provide the accuracy required for geodetic investigations. Independent measurements of sea surface pressure and sea surface height can be used to remove these contributions from the observed sea floor pressure timeseries. We will integrate our seafloor pressure measurements with air pressure data, and precise vertical measurements of the sea surface from kinematic positioning of the Wave Glider over the bottom sensor, to determine cm-scale vertical seafloor motions. The seafloor package will consist of a simple tripod frame that seats the pressure sensor unit, and includes an attachment onto which an ROV can install a mobile pressure recorder (MPR) should ship and ROV time be available. Two visits with an MPR would allow calibration of the linear drift of the continuous sensor, further enhancing the value of the timeseries. The pressure sensor is recoverable and serviceable and using the MPR calibration will enable the seafloor monument to be re-occupied to extend the pressure record beyond a single 5+ year deployment. We are currently focused on retrieving high accuracy vertical sea floor motions, but, importantly, we have chosen a development approach that provides a simple upgrade path for incorporating the Wave Glider GPS-Acoustic (GPS/A) measurement system under development at SIO. With this upgrade, Wave Gliders could also acquire accurate horizontal motions of the sea floor sensors, and provide a cost-effective way of performing full, 3-dimensional, surveys of sea-floor motions.

Campaign-Style Measurements of Vertical Seafloor Deformation in the Cascadia Subduction Zone Using an Absolute Self-Calibrating Pressure Recorder

NASA Astrophysics Data System (ADS)

Cook, M. J.; Sasagawa, G. S.; Roland, E. C.; Schmidt, D. A.; Wilcock, W. S. D.; Zumberge, M. A.

2017-12-01

Seawater pressure can be used to measure vertical seafloor deformation since small seafloor height changes produce measurable pressure changes. However, resolving secular vertical deformation near subduction zones can be difficult due to pressure gauge drift. A typical gauge drift rate of about 10 cm/year exceeds the expected secular rate of 1 cm/year or less in Cascadia. The absolute self-calibrating pressure recorder (ASCPR) was developed to solve the issue of gauge drift by using a deadweight calibrator to make campaign-style measurements of the absolute seawater pressure. Pressure gauges alternate between observing the ambient seawater pressure and the deadweight calibrator pressure, which is an accurately known reference value, every 10-20 minutes for several hours. The difference between the known reference pressure and the observed seafloor pressure allows offsets and transients to be corrected to determine the true, absolute seafloor pressure. Absolute seafloor pressure measurements provide a great utility for geodetic deformation studies. The measurements provide instrument-independent, benchmark values that can be used far into the future as epoch points in long-term time series or as important calibration points for other continuous pressure records. The ASCPR was first deployed in Cascadia in 2014 and 2015, when seven concrete seafloor benchmarks were placed along a trench-perpendicular profile extending from 20 km to 105 km off the central Oregon coast. Two benchmarks have ASCPR measurements that span three years, one benchmark spans two years, and four benchmarks span one year. Measurement repeatability is currently 3 to 4 cm, but we anticipate accuracy on the order of 1 cm with improvements to the instrument metrology and processing tidal and non-tidal oceanographic signals.

Phase relations and adiabats in boiling seafloor geothermal systems

USGS Publications Warehouse

Bischoff, J.L.; Pitzer, Kenneth S.

1985-01-01

Observations of large salinity variations and vent temperatures in the range of 380-400??C suggest that boiling or two-phase separation may be occurring in some seafloor geothermal systems. Consideration of flow rates and the relatively small differences in density between vapors and liquids at the supercritical pressures at depth in these systems suggests that boiling is occurring under closed-system conditions. Salinity and temperature of boiling vents can be used to estimate the pressure-temperature point in the subsurface at which liquid seawater first reached the two-phase boundary. Data are reviewed to construct phase diagrams of coexisting brines and vapors in the two-phase region at pressures corresponding to those of the seafloor geothermal systems. A method is developed for calculating the enthalpy and entropy of the coexisting mixtures, and results are used to construct adiabats from the seafloor to the P-T two-phase boundary. Results for seafloor vents discharging at 2300 m below sea level indicate that a 385??C vent is composed of a brine (7% NaCl equivalent) in equilibrium with a vapor (0.1% NaCl). Brine constitutes 45% by weight of the mixture, and the fluid first boiled at approximately 1 km below the seafloor at 415??C, 330 bar. A 400??C vent is primarily vapor (88 wt.%, 0.044% NaCl) with a small amount of brine (26% NaCl) and first boiled at 2.9 km below the seafloor at 500??C, 520 bar. These results show that adiabatic decompression in the two-phase region results in dramatic cooling of the fluid mixture when there is a large fraction of vapor. ?? 1985.

Occurrence of near-seafloor gas hydrates and associated cold vents in the Ulleung Basin, East Sea

NASA Astrophysics Data System (ADS)

Bahk, J.-J.; Kong, G.-S.; Park, Y.; Kim, J.-H.; Lee, H.; Park, Y.; Park, K.-P.

2009-04-01

During the site survey cruise for proposed drill sites of the Ulleung Basin Gas Hydrate Expedition 01, near-seafloor gas hydrates were discovered in core sediments from both regions of basin plain (2066-2012 m water depth) and southern slope (898 m) of the Ulleung Basin. The gas hydrate-bearing cores were exclusively retrieved from high backscatter intensity areas in processed 13 kHz multi-beam data, implying high seafloor reflectivity. In high-resolution (2-7 kHz) sub-bottom profiles, the coring sites are also characterized by narrow (< about 500 m wide) acoustic blank zones reaching seafloor, where they have surface expressions of low-relief (< about 5 m high) mound. In the data from a 38 kHz split-beam echosounder, which was deployed for acoustic characterization of gas bubbles, there are no apparent gas flares associated with the blank zones. The recovered gas hydrates mainly consist of disseminated nodules or veins in clayey mud, which normally occur from 5-6 m below the seafloor to the maximum penetration depth (<8 m) of the cores. In some cases, they were associated with abundant scattered authigenic carbonate nodules. Compositional and structural analyses of selected gas hydrate samples revealed that they consist of structure I hydrates which contain more than 99% methane with carbon isotope values ranging from -64 to -80 per mil (PDB). The preliminary results of the site survey cruise collectively suggest that the near-seafloor gas hydrates are related to cold vents, where high seafloor reflectivity is caused by presence of gas hydrates and authigenic carbonates. Gas seeping activity in the cold vents appears to be currently dormant.

Archive of Side Scan Sonar and Swath Bathymetry Data collected during USGS Cruise 10CCT02 Offshore of Petit Bois Island Including Petit Bois Pass, Gulf Islands National Seashore, Mississippi, March 2010

USGS Publications Warehouse

Pfeiffer, William R.; Flocks, James G.; DeWitt, Nancy T.; Forde, Arnell S.; Kelso, Kyle; Thompson, Phillip R.; Wiese, Dana S.

2011-01-01

In March of 2010, the U.S. Geological Survey (USGS) conducted geophysical surveys offshore of Petit Bois Island, Mississippi, and Dauphin Island, Alabama (fig. 1). These efforts were part of the USGS Gulf of Mexico Science Coordination partnership with the U.S. Army Corps of Engineers (USACE) to assist the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazards Susceptibility Project by mapping the shallow geologic stratigraphic framework of the Mississippi Barrier Island Complex. These geophysical surveys will provide the data necessary for scientists to define, interpret, and provide baseline bathymetry and seafloor habitat for this area and to aid scientists in predicting future geomorphological changes of the islands with respect to climate change, storm impact, and sea-level rise. Furthermore, these data will provide information for barrier island restoration, particularly in Camille Cut, and protection for the historical Fort Massachusetts on Ship Island, Mississippi. For more information please refer to http://ngom.usgs.gov/gomsc/mscip/index.html. This report serves as an archive of the processed swath bathymetry and side scan sonar data (SSS). Data products herein include gridded and interpolated surfaces, seabed backscatter images, and ASCII x,y,z data products for both swath bathymetry and side scan sonar imagery. Additional files include trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Scanned images of the handwritten and digital FACS logs are also provided as PDF files. Refer to the Acronyms page for expansion of acronyms and abbreviations used in this report.

Morphology of central California continental margin, revealed by long-range side-scan sonar (GLORIA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, J.V.; McCulloch, D.S.; Eittreim, S.L.

1985-02-01

Leg 2 of the 4-leg USGS EEZ-SCAN 84 program used GLORIA long-range side-scan sonar to survey the region from Pt. Conception to just south of Pt. Arena, from the shelf break to the 200-nmi coverage. The overlapping digital sonographs were slant-range and anamorphically corrected, and a photomosaic of the sonographs was constructed at a scale of 1:375,000 (1 in. = 11.1 km). The underlying bed rock appears to be an important control in shaping the morphology of this margin. Several faults have sea-floor expression and lie subparallel to the margin. The density of canyons and gullies on the slope variesmore » from south to north, probably because of variations in the characteristics of the bed rock. The slope west of San Francisco is the most dissected segment of the central California slope. Monterey Fan is covered by large-scale bed forms (5-15 m amplitude and 1.5-2.0 km wavelength) over much of its surface. Monterey channel crosses southwestward across the fan, but abruptly turns south along a 40-km long surface fault that coincides with a well-mapped meander loop. The channel loops to the north then turns southward crossing the entire Monterey Fan, at its distal reaches, changes to a broad, braided pattern. Major slumps on the margin have long (> 30 km) scarps, some have slump folds, and one has a debris-flow deposit that can be acoustically traced for more than 75 km. Seventeen new seamounts were mapped. Taney Seamounts are large, rimmed, calderas with diameters of about 15 km each; these appear to be very large explosive or summit-collapse features.« less

Diversity and Biogeography of Bathyal and Abyssal Seafloor Bacteria

PubMed Central

Bienhold, Christina; Zinger, Lucie; Boetius, Antje; Ramette, Alban

2016-01-01

The deep ocean floor covers more than 60% of the Earth’s surface, and hosts diverse bacterial communities with important functions in carbon and nutrient cycles. The identification of key bacterial members remains a challenge and their patterns of distribution in seafloor sediment yet remain poorly described. Previous studies were either regionally restricted or included few deep-sea sediments, and did not specifically test biogeographic patterns across the vast oligotrophic bathyal and abyssal seafloor. Here we define the composition of this deep seafloor microbiome by describing those bacterial operational taxonomic units (OTU) that are specifically associated with deep-sea surface sediments at water depths ranging from 1000–5300 m. We show that the microbiome of the surface seafloor is distinct from the subsurface seafloor. The cosmopolitan bacterial OTU were affiliated with the clades JTB255 (class Gammaproteobacteria, order Xanthomonadales) and OM1 (Actinobacteria, order Acidimicrobiales), comprising 21% and 7% of their respective clades, and about 1% of all sequences in the study. Overall, few sequence-abundant bacterial types were globally dispersed and displayed positive range-abundance relationships. Most bacterial populations were rare and exhibited a high degree of endemism, explaining the substantial differences in community composition observed over large spatial scales. Despite the relative physicochemical uniformity of deep-sea sediments, we identified indicators of productivity regimes, especially sediment organic matter content, as factors significantly associated with changes in bacterial community structure across the globe. PMID:26814838

Association among active seafloor deformation, mound formation, and gas hydrate growth and accumulation within the seafloor of the Santa Monica Basin, offshore California

USGS Publications Warehouse

Paull, C.K.; Normark, W.R.; Ussler, W.; Caress, D.W.; Keaten, R.

2008-01-01

Seafloor blister-like mounds, methane migration and gas hydrate formation were investigated through detailed seafloor surveys in Santa Monica Basin, offshore of Los Angeles, California. Two distinct deep-water (??? 800??m water depth) topographic mounds were surveyed using an autonomous underwater vehicle (carrying a multibeam sonar and a chirp sub-bottom profiler) and one of these was explored with the remotely operated vehicle Tiburon. The mounds are > 10??m high and > 100??m wide dome-shaped bathymetric features. These mounds protrude from crests of broad anticlines (~ 20??m high and 1 to 3??km long) formed within latest Quaternary-aged seafloor sediment associated with compression between lateral offsets in regional faults. No allochthonous sediments were observed on the mounds, except slumped material off the steep slopes of the mounds. Continuous streams of methane gas bubbles emanate from the crest of the northeastern mound, and extensive methane-derived authigenic carbonate pavements and chemosynthetic communities mantle the mound surface. The large local vertical displacements needed to produce these mounds suggests a corresponding net mass accumulation has occurred within the immediate subsurface. Formation and accumulation of pure gas hydrate lenses in the subsurface is proposed as a mechanism to blister the seafloor and form these mounds. ?? 2008 Elsevier B.V. All rights reserved.

Analysis of calibrated seafloor backscatter for habitat classification methodology and case study of 158 spots in the Bay of Biscay and Celtic Sea

NASA Astrophysics Data System (ADS)

Fezzani, Ridha; Berger, Laurent

2018-06-01

An automated signal-based method was developed in order to analyse the seafloor backscatter data logged by calibrated multibeam echosounder. The processing consists first in the clustering of each survey sub-area into a small number of homogeneous sediment types, based on the backscatter average level at one or several incidence angles. Second, it uses their local average angular response to extract discriminant descriptors, obtained by fitting the field data to the Generic Seafloor Acoustic Backscatter parametric model. Third, the descriptors are used for seafloor type classification. The method was tested on the multi-year data recorded by a calibrated 90-kHz Simrad ME70 multibeam sonar operated in the Bay of Biscay, France and Celtic Sea, Ireland. It was applied for seafloor-type classification into 12 classes, to a dataset of 158 spots surveyed for demersal and benthic fauna study and monitoring. Qualitative analyses and classified clusters using extracted parameters show a good discriminatory potential, indicating the robustness of this approach.

Hudson Canyon benthic habitats characterization and mapping by integrated analysis of multidisciplinary data

NASA Astrophysics Data System (ADS)

Pierdomenico, Martina; Guida, Vincent G.; Rona, Peter A.; Macelloni, Leonardo; Scranton, Mary I.; Asper, Vernon; Diercks, Arne

2013-04-01

Hudson Canyon, about 180 km SE of New York City, is the largest eastern U.S. submarine canyon and is under consideration for HAPC (Habitat Area of Particular Concern) status, representing a fisheries and biodiversity hot spot. Interest in the area, within the perspective of ecosystem based management, marine spatial planning, habitat and species conservation, led to a joint project between NOAA Northeast Fisheries, U.S. Geological Survey (USGS), Mississippi Mineral Research Institute (MMRI), National Institute for Undersea Science and Technology (NIUST), Stony Brook and Rutgers Universities for the study of benthic habitats, that includes the assembly of existing data with newly collected ones: acoustic mapping, visual ground-truthing, hydrographic, sedimentological, and trawl data collections. Acoustic mapping, performed using AUV-mounted multibeam sonar, provided ultra-high resolution bathymetric and backscatter imagery (3m and 1m respectively) at all water depths for identification of geomorphological features and for the characterization of surficial sediments along the two thirds of the shelf portion of the canyon. Identification of benthic and demersal communities was accomplished by visual ground thruthing with underwater vehicle video and still cameras, and from trawl catch data. A CTD-rosette sampler provided water column salinity-temperature profiles and water samples for dissolved methane analysis in the vicinity of suspected bottom sources. Analysis of data revealed a complex of topographic structures and hydrological patterns that provide a wide range of physical habitats in a relatively small area. A mosaic of sandy and muddy substrates, gravel beds, rock outcrops, and semilithified clay outcrops host rich and varied faunal assemblages, including deepwater corals and sponge communities. Pockmark fields, occurring below 300 m depth, suggest that methane-based chemosynthetic carbonate deposition contributes to creation of specific hard bottom habitats. Previously described hummocky terrain associated with extensive, long-term burrowing activity by golden tilefish (Lopholatilus chamaeleonticeps) was clearly delineated along the canyon rims. Bedform fields and potential current deposits observed along the upper portion of canyon walls suggest the presence of intense bottom currents flowing parallel to canyon axis. A benthic habitat map of Hudson Canyon head was produced by integration of the different datasets. The distribution of habitats was primarily inferred from geophysical data characteristics. Furthermore habitat characteristics can be related to sedimentary and oceanographic processes acting on the seafloor. Comparison and refinement of bathymetric and backscatter imagery with ground truth data enabled validation of acoustic classification of the seafloor, allowing the definition of morpho-acoustic classes corresponding to as many habitats, and to extend the predictive results over larger areas.

Multibeam bathymetry and selected perspective views offshore San Diego, California

USGS Publications Warehouse

Dartnell, Peter; Normark, William R.; Driscoll, Neal W.; Babcock, Jeffrey M.; Gardner, James V.; Kvitek, Rikk G.; Iampietro, Pat J.

2007-01-01

This set of two posters consists of a map on one sheet and a set of seven perspective views on the other. The ocean floor image was generated from multibeam-bathymetry data acquired by Federal and local agencies as well as academic institutions including: - U.S. Geological Survey mapped from the La Jolla Canyon south to the US-Mexico border using a Kongsberg Simrad multibeam echosounder system (MBES) (March - April 1998). Data and metadata available at http://pubs.usgs.gov/of/2004/1221/. - Woods Hole Oceanographic Institution and SCRIPPS Institution of Oceanography mapped the majority of the La Jolla Fan Valley including the sea floor to the north and south of the valley using a Seabeam 2100 MBES. Data available at http://www.ngdc.noaa.gov/mgg/bathymetry/multibeam.html. Survey ID, AT07L09, Chief Scientists, Barrie Walden and Joseph Coburn (April 2002). - California State University, Monterey Bay, mapped Scripps Canyon and the head of La Jolla Canyon using a Reson 8101 MBES (October 2001). Data and metadata available at http://seafloor.csumb.edu/SFMLwebDATA.htm. This work was funded by the California Department of Fish and Game California Coastal Conservancy, San Diego Association of Governments (SANDAG), California Department of Fish and Game, and Fugro Pelagos mapped the nearshore region out to about 35-40 m. - The sea floor within this image that has not been mapped with MBES is filled in with interpreted bathymetry gridded from single-beam data available at http://www.ngdc.noaa.gov/mgg/bathymetry/hydro.html. Depths are in meters below sea level, which is referenced to Mean Lower Low Water.

Oceanic microplate formation records the onset of India-Eurasia collision

NASA Astrophysics Data System (ADS)

Matthews, Kara J.; Dietmar Müller, R.; Sandwell, David T.

2016-01-01

Mapping of seafloor tectonic fabric in the Indian Ocean, using high-resolution satellite-derived vertical gravity gradient data, reveals an extinct Pacific-style oceanic microplate ('Mammerickx Microplate') west of the Ninetyeast Ridge. It is one of the first Pacific-style microplates to be mapped outside the Pacific basin, suggesting that geophysical conditions during formation probably resembled those that have dominated at eastern Pacific ridges. The microplate formed at the Indian-Antarctic ridge and is bordered by an extinct ridge in the north and pseudofault in the south, whose conjugate is located north of the Kerguelen Plateau. Independent microplate rotation is indicated by asymmetric pseudofaults and rotated abyssal hill fabric, also seen in multibeam data. Magnetic anomaly picks and age estimates calculated from published spreading rates suggest formation during chron 21o (∼47.3 Ma). Plate reorganizations can trigger ridge propagation and microplate development, and we propose that Mammerickx Microplate formation is linked with the India-Eurasia collision (initial 'soft' collision). The collision altered the stress regime at the Indian-Antarctic ridge, leading to a change in segmentation and ridge propagation from an establishing transform. Fast Indian-Antarctic spreading that preceded microplate formation, and Kerguelen Plume activity, may have facilitated ridge propagation via the production of thin and weak lithosphere; however both factors had been present for tens of millions of years and are therefore unlikely to have triggered the event. Prior to the collision, the combination of fast spreading and plume activity was responsible for the production of a wide region of undulate seafloor to the north of the extinct ridge and 'W' shaped lineations that record back and forth ridge propagation. Microplate formation provides a precise means of dating the onset of the India-Eurasia collision, and is completely independent of and complementary to timing constraints derived from continental geology or convergence histories.

India-Eurasia collision triggers formation of an oceanic microplate

NASA Astrophysics Data System (ADS)

Matthews, Kara; Müller, Dietmar; Sandwell, David

2016-04-01

Detailed mapping of seafloor tectonic fabric in the Indian Ocean, using high-resolution satellite-derived vertical gravity gradient data, reveals an extinct Pacific-style oceanic microplate - the Mammerickx Microplate - west of the Ninetyeast Ridge. It is one of the first Pacific-style microplates to be mapped outside the Pacific basin, suggesting that geophysical conditions during formation probably resembled those that have dominated at eastern Pacific ridges. The microplate formed at the Indian-Antarctic ridge and is bordered by an extinct ridge in the north and pseudofault in the south, whose conjugate is located north of the Kerguelen Plateau. Independent microplate rotation is indicated by asymmetric pseudofaults and rotated abyssal hill fabric, also identified in multibeam data. Magnetic anomaly picks and age estimates calculated from published spreading rates suggest formation during chron 21o (~47.3 Ma). Plate reorganizations can trigger ridge propagation and microplate development, and we propose that formation of the Mammerickx Microplate is linked with the initial 'soft' stage of the India-Eurasia collision. The collision altered the stress regime at the Indian-Antarctic ridge, leading to a change in segmentation and ridge propagation from an establishing transform fault. Fast Indian-Antarctic spreading that preceded microplate formation, and Kerguelen Plume activity may have facilitated ridge propagation via the production of thin and weak lithosphere. However, both factors had been present for tens of millions of years and are therefore unlikely to have triggered the event. Prior to the collision, this combination of fast spreading and plume activity was responsible for the production of a wide region of undulate seafloor to the north of the extinct ridge and 'W' shaped lineations that record back and forth ridge propagation. Microplate formation provides a means of dating the onset of the India-Eurasia collision, and is completely independent of and complementary to timing constraints derived from continental geology or convergence histories.

The PROTEUS Experiment: Active Source Seismic Imaging of the Crustal Magma Plumbing Structure of the Santorini Arc Volcano

NASA Astrophysics Data System (ADS)

Hooft, E. E. E.; Morgan, J. V.; Nomikou, P.; Toomey, D. R.; Papazachos, C. V.; Warner, M.; Heath, B.; Christopoulou, M. E.; Lampridou, D.; Kementzetzidou, D.

2016-12-01

The goal of the PROTEUS seismic experiment (Plumbing Reservoirs Of The Earth Under Santorini) is to examine the entire crustal magma plumbing system beneath a continental arc volcano and determine the magma geometry and connections throughout the crust. These physical parameters control magma migration, storage, and eruption and inform the question of how physical and chemical processing of magma at arc volcanoes forms the andesitic rock compositions that dominate the lower continental crust. These physical parameters are also important to understand volcanic-tectonic interactions and geohazards. Santorini is ideal for these goals because the continental crust has been thinned by extension and so the deep magmatic system is more accessible, also it is geologically well studied. Since the volcano is a semi-submerged, it was possible to collect a unique 3D marine-land active source seismic dataset. During the PROTEUS experiment in November-December of 2015, we recorded 14,300 marine sound sources from the US R/V Langseth on 89 OBSIP short period ocean bottom seismometers and 60 German and 5 Greek land seismometers. The experiment was designed for high-density spatial sampling of the seismic wavefield to allow us to apply two state-of-the-art 3D inversion methods: travel time tomography and full waveform inversion. A preliminary travel time tomography model of the upper crustal seismic velocity structure of the volcano and surrounding region is presented in an accompanying poster. We also made marine geophysical maps of the seafloor using multi-beam bathymetry and of the gravity and magnetic fields. The new seafloor map reveals the detailed structure of the major fault system between Santorini and Amorgos, of associated landslides, and of newly discovered volcanic features. The PROTEUS project will provide new insights into the structure of the whole crustal magmatic system of a continental arc volcano and its evolution within the surrounding tectonic setting.

Anatomy of La Jolla submarine canyon system; offshore southern California

USGS Publications Warehouse

Paull, C.K.; Caress, D.W.; Lundsten, E.; Gwiazda, R.; Anderson, K.; McGann, M.; Conrad, J.; Edwards, B.; Sumner, E.J.

2013-01-01

An autonomous underwater vehicle (AUV) carrying a multibeam sonar and a chirp profiler was used to map sections of the seafloor within the La Jolla Canyon, offshore southern California, at sub-meter scales. Close-up observations and sampling were conducted during remotely operated vehicle (ROV) dives. Minisparker seismic-reflection profiles from a surface ship help to define the overall geometry of the La Jolla Canyon especially with respect to the pre-canyon host sediments. The floor of the axial channel is covered with unconsolidated sand similar to the sand on the shelf near the canyon head, lacks outcrops of the pre-canyon host strata, has an almost constant slope of 1.0° and is covered with trains of crescent shaped bedforms. The presence of modern plant material entombed within these sands confirms that the axial channel is presently active. The sand on the canyon floor liquefied during vibracore collection and flowed downslope, illustrating that the sediment filling the channel can easily fail even on this gentle slope. Data from the canyon walls help constrain the age of the canyon and extent of incision. Horizontal beds of moderately cohesive fine-grained sediments exposed on the steep canyon walls are consistently less than 1.232 million years old. The lateral continuity of seismic reflectors in minisparker profiles indicate that pre-canyon host strata extend uninterrupted from outside the canyon underneath some terraces within the canyon. Evidence of abandoned channels and point bar-like deposits are noticeably absent on the inside bend of channel meanders and in the subsurface of the terraces. While vibracores from the surface of terraces contain thin (< 10 cm) turbidites, they are inferred to be part of a veneer of recent sediment covering pre-canyon host sediments that underpin the terraces. The combined use of state of the art seafloor mapping and exploration tools provides a uniquely detailed view of the morphology within an active submarine canyon.

Crustal structure and tectonic provinces of the Riiser-Larsen Sea area (East Antarctica): results of geophysical studies

NASA Astrophysics Data System (ADS)

Leitchenkov, G.; Guseva, J.; Gandyukhin, V.; Grikurov, G.; Kristoffersen, Y.; Sand, M.; Golynsky, A.; Aleshkova, N.

2008-06-01

About 16,000 km of multichannel seismic (MCS), gravity and magnetic data and 28 sonobuoys were acquired in the Riiser-Larsen Sea Basin and across the Gunnerus and Astrid Ridges, to study their crustal structure. The study area has contrasting basement morphologies and crustal thicknesses. The crust ranges in thickness from about 35 km under the Riiser-Larsen Sea shelf, 26 28 km under the Gunnerus Ridge, 12 17 km under the Astrid Ridge, and 9.5 10 km under the deep-water basin. A 50-km-wide block with increased density and magnetization is modeled from potential field data in the upper crust of the inshore zone and is interpreted as associated with emplacement of mafic intrusions into the continental margin of the southern Riiser-Larsen Sea. In addition to previously mapped seafloor spreading magnetic anomalies in the western Riiser-Larsen Sea, a linear succession from M2 to M16 is identified in the eastern Riiser-Larsen Sea. In the southwestern Riiser-Larsen Sea, a symmetric succession from M24B to 24n with the central anomaly M23 is recognized. This succession is obliquely truncated by younger lineation M22 M22n. It is proposed that seafloor spreading stopped at about M23 time and reoriented to the M22 opening direction. The seismic stratigraphy model of the Riiser-Larsen Sea includes five reflecting horizons that bound six seismic units. Ages of seismic units are determined from onlap geometry to magnetically dated oceanic basement and from tracing horizons to other parts of the southern Indian Ocean. The seaward edge of stretched and attenuated continental crust in the southern Riiser-Larsen Sea and the landward edge of unequivocal oceanic crust are mapped based on structural and geophysical characteristics. In the eastern Riiser-Larsen Sea the boundary between oceanic and stretched continental crust is better defined and is interpreted as a strike-slip fault lying along a sheared margin.

Deformation associated to exhumation by detachment faulting of upper mantle rocks in a fossil Ocean Continent Transition: The example of the Totalp unit in SE Switzerland

NASA Astrophysics Data System (ADS)

Picazo, S.; Manatschal, G.; Cannat, M.

2013-12-01

The exhumation of upper mantle rocks along detachment faults is widespread at Mid-Ocean Ridges and at the Ocean-Continent Transition (OCT) of rifted continental margins. Thermo-mechanical models indicate that significant strain softening of the fault rocks in the footwall is required in order to produce such large fault offsets. Our work focuses on deformation textures, and the associated mineralogy in ultramafic rocks sampled in the upper levels of the footwall next to the exhumation fault. We present two OCT examples, the Totalp relict of a paleo-Tethys OCT exposed in SE Switzerland, and the Iberian distal margin (ODP Leg 173 Site 1070). We built a new geological map and a section of the Totalp unit near Davos (SE Switzerland) and interpreted this area as a local exposure of a paleo-seafloor that is formed by an exhumed detachment surface and serpentinized peridotites. The top of the exhumed mantle rocks is made of ophicalcites that resulted from the carbonation of serpentine under static conditions at the seafloor. The ophicalcites preserve depositional contacts with Upper Jurassic to Lower Cretaceous pelagic sediments. These sequences did not exceed prehnite-pumpellyite metamorphic facies conditions, and locally escaped Alpine deformation. Thin mylonitic shear zones as well as foliated amphibole-bearing ultramafic rocks have been mapped. The age of these rocks and the link with the final exhumation history are yet unknown but since amphibole-bearing ultramafic rocks can be found as clasts in cataclasites related to the detachment fault, they pre-date detachment faulting. Our petrostructural study of the exhumed serpentinized rocks also reveals a deformation gradient from cataclasis to gouge formation within 150m in the footwall of the proposed paleo-detachment fault. This deformation postdates serpentinization. It involves a component of plastic deformation of serpentine in the most highly strained intervals that has suffered pronounced grain-size reduction and a polyphase cataclastic overprint.

Exploring deep sea habitats for baseline characterization using NOAA Ship Okeanos Explorer

NASA Astrophysics Data System (ADS)

McKenna, L.; Cantwell, K. L.; Kennedy, B. R.; Lobecker, E.; Sowers, D.; Elliott, K.

2015-12-01

In 2015, NOAA Ship Okeanos Explorer, the only US federal ship dedicated to ocean exploration, systematically explored previously unknown deep sea ecosystems in the Caribbean and remote regions in the vicinity of the Hawaiian Islands. Initial characterization of these areas is essential in order to establish a baseline against which to assess potential future changes due to climate and anthropogenic change. In the Caribbean, over 37,500 sq km of previously unmapped seafloor were mapped with a high resolution multibeam revealing rugged canyons along shelf breaks, intricate incised channels, and complex tectonic features. 12 ROV dives, in the 300-6,000 m depth range, visually explored seamounts, escarpments, submarine canyons, and the water column revealing diverse ecosystems and habitats. Discoveries include large assemblages of deep sea corals, range extensions, and observations of several rare and potentially new organisms - including a seastar that had not been documented since its holotype specimen. In the Pacific, over 50,000 sq km of seafloor were mapped in high-resolution, revealing long linear ridge and tectonic fracture zone features, both peaked and flat-topped seamounts, and numerous features that appear to be volcanic in origin. To better understand ecosystem dynamics in depths greater than 2,000 m, the deepest ever ROV surveys and sampling were conducted in remote Pacific island marine sanctuaries and monuments. Novel observations include range extensions and exploration of dense deep sea coral and sponge habitat. Baseline habitat characterization was also conducted on seamounts within the Prime Crust Zone (PCZ), an area with the highest expected concentration of deep-sea minerals in the Pacific. The Hawaiian operations marked the first ever ROV sampling effort conducted onboard Okeanos, and several geological and biological samples are now available at museums and sample repositories in addition to all digital data available through the National Archives.

ARENA - A Collaborative Immersive Environment for Virtual Fieldwork

NASA Astrophysics Data System (ADS)

Kwasnitschka, T.

2012-12-01

Whenever a geoscientific study area is not readily accessible, as is the case on the deep seafloor, it is difficult to apply traditional but effective methods of fieldwork, which often require physical presence of the observer. The Artificial Research Environment for Networked Analysis (ARENA), developed at GEOMAR | Helmholtz Centre for Ocean Research Kiel within the Cluster of Excellence "The Future Ocean", provides a backend solution to robotic research on the seafloor by means of an immersive simulation environment for marine research: A hemispherical screen of 6m diameter covering the entire lower hemisphere surrounds a group of up to four researchers at once. A variety of open source (e.g. Microsoft Research World Wide Telescope) and commercial software platforms allow the interaction with e.g. in-situ recorded video, vector maps, terrain, textured geometry, point cloud and volumetric data in four dimensions. Data can be put into a holistic, georeferenced context and viewed on scales stretching from centimeters to global. Several input devices from joysticks to gestures and vocalized commands allow interaction with the simulation, depending on individual preference. Annotations added to the dataset during the simulation session catalyze the following quantitative evaluation. Both the special simulator design, making data perception a group experience, and the ability to connect remote instances or scaled down versions of ARENA over the Internet are significant advantages over established immersive simulation environments.

Potential for Sulfide Mineral Deposits in Australian Waters

NASA Astrophysics Data System (ADS)

McConachy, Timothy F.

The world is witnessing a paradigm shift in relation to marine mineral resources. High-value seafloor massive sulfides at active convergent plate boundaries are attracting serious commercial attention. Under the United Nations Convention on the Law of the Sea, maritime jurisdictional zones will increase by extending over continental margins and ocean basins. For Australia, this means a possible additional 3.37 million km2 of seabed. Australia's sovereign responsibility includes, amongst other roles, the management of the exploitation of nonliving resources and sea-bed mining. What, therefore, is the potential in Australia's marine jurisdiction for similar deposits to those currently attracting commercial attention in neighboring nations and for other types/styles of sulfide deposits? A preliminary review of opportunities suggests the following: (i) volcanogenic copper—lead—zinc—silver—gold mineralization in fossil arcs and back arcs in eastern waters Norfolk Ridge and the Three Kings Ridge; (ii) Mississippi Valley-type lead—zinc—silver mineralization in the NW Shelf area; (iii) ophiolite-hosted copper mineralization in the Macquarie Ridge Complex in the Southern Ocean; and (iv) submerged extensions of prospective land-based terranes, one example being offshore Gawler Craton for iron oxide—copper—gold deposits. These areas would benefit from pre-competitive surveys of detailed swath bathymetry mapping, geophysical surveys, and sampling to help build a strategic inventory of future seafloor mineral resources for Australia.

Hydrothermal plume mapping as a prospecting tool for seafloor sulfide deposits: a case study at the Zouyu-1 and Zouyu-2 hydrothermal fields in the southern Mid-Atlantic Ridge

NASA Astrophysics Data System (ADS)

Tao, Chunhui; Chen, Sheng; Baker, Edward T.; Li, Huaiming; Liang, Jin; Liao, Shili; Chen, Yongshun John; Deng, Xianming; Zhang, Guoyin; Gu, Chunhua; Wu, Jialin

2017-06-01

Seafloor hydrothermal polymetallic sulfide deposits are a new type of resource, with great potential economic value and good prospect development. This paper discusses turbidity, oxidation-reduction potential, and temperature anomalies of hydrothermal plumes from the Zouyu-1 and Zouyu-2 hydrothermal fields on the southern Mid-Atlantic Ridge. We use the known location of these vent fields and plume data collected in multiple years (2009, 2011, 2013) to demonstrate how real-time plume exploration can be used to locate active vent fields, and thus associated sulfide deposits. Turbidity anomalies can be detected 10 s of km from an active source, but the location precision is no better than a few kilometers because fine-grained particles are quasi-conservative over periods of many days. Temperature and oxidation-reduction potential anomalies provide location precision of a few hundred meters. Temperature anomalies are generally weak and difficult to reliably detect, except by chance encounters of a buoyant plume. Oxidation-reduction potential is highly sensitive (nmol concentrations of reduced hydrothermal chemicals) to discharges of all temperatures and responds immediately to a plume encounter. Real-time surveys using continuous tows of turbidity and oxidation-reduction potential sensors offer the most efficient and precise surface ship exploration presently possible.

Amplification of drawdown and runup over Hawaii's insular shelves by tsunami N-waves from mega Aleutian earthquakes

NASA Astrophysics Data System (ADS)

Bai, Yefei; Yamazaki, Yoshiki; Cheung, Kwok Fai

2018-04-01

The latest tsunami evacuation maps of Hawaii include an extreme scenario triggered by an Mw 9.3 Aleutian earthquake with large near-trench rupture. The tectonic plate motion produces concentrated seafloor uplift toward the deepest part of the trench generating a tsunami with strong non-hydrostatic characters. A parametric study shows the skewed seafloor uplift produces a dispersive leading crest followed by a prominent trough in the form of an N-wave. The trough maintains its depth across the ocean in the absence of side lobes and dispersion. Shifting of the uplift toward the trench tends to deepen the trough, but has diminishing effects on the wave crest away from the source. While the attenuated leading crest produces relatively moderate runup on north-facing shores of the Hawaiian Islands, with matching of the N-wave and shelf resonance periods, the trough produces an impulsive drawdown followed by an energetic upswing with unprecedented runup for a far-field tsunami. A set of control computations without dispersion reaffirms that a non-hydrostatic model is essential to account for these complex wave processes from the source to the shore. This case study highlights the unique tsunami hazards posed by the Aleutians to Hawaii and the role of wave troughs in delineating the impacts for hazard assessment and engineering design.

Seafloor geodesy: Measuring surface deformation and strain-build up

NASA Astrophysics Data System (ADS)

Kopp, Heidrun; Lange, Dietrich; Hannemann, Katrin; Petersen, Florian

2017-04-01

Seafloor deformation is intrinsically related to tectonic processes, which potentially may evolve into geohazards, including earthquakes and tsunamis. The nascent scientific field of seafloor geodesy provides a way to monitor crustal deformation at high resolution comparable to the satellite-based GPS technique upon which terrestrial geodesy is largely based. The measurements extract information on stress and elastic strain stored in the oceanic crust. Horizontal seafloor displacement can be obtained by acoustic/GPS combination to provide absolute positioning or by long-term acoustic telemetry between different beacons fixed on the seafloor. The GeoSEA (Geodetic Earthquake Observatory on the SEAfloor) array uses acoustic telemetry for relative positioning at mm-scale resolution. The transponders within an array intercommunicate via acoustic signals for a period of up to 3.5 years. The seafloor acoustic transponders are mounted on 4 m high tripod steel frames to ensure clear line-of-sight between the stations. The transponders also include high-precision pressure sensors to monitor vertical movements and dual-axis inclinometers in order to measure their level as well as any tilt of the seafloor. Sound velocity sensor measurements are used to correct for water sound speed variations. A further component of the network is GeoSURF, a self-steering autonomous surface vehicle (Wave Glider), which monitors system health and is able to upload the seafloor data to the sea surface and to transfer it via satellite. The GeoSEA array is capable of both continuously monitoring horizontal and vertical ground displacement rates along submarine fault zones and characterizing their behavior (locked or aseismically creeping). Seafloor transponders are currently installed along the Siliviri segment of the North Anatolian Fault offshore Istanbul for measurements of strain build-up along the fault. The first 18 month of baseline ranging were analyzed by a joint-least square inversion and forward modeling for across-fault baseline changes. The initial results of the long-term observation period preclude fault-displacement at rates larger than a few millimeters-per-year, suggesting a locked state for the Istanbul-Siliviri segment, indicating that this portion of the fault is accumulating stress rather than continuously creeping at a slip-rate higher than 10 mm/yr during the observation period. In addition, three arrays are currently deployed on the marine forearc and outer rise of the South American subduction system around 21°S. This segment of the Nazca-South American plate boundary has last ruptured in an earthquake in 1877 and was identified as a seismic gap prior to the 2014 Iquique/Pisagua earthquake (Mw=8.1). The southern portion of the segment remains unbroken by a recent earthquake.

First Observation of Coseismic Seafloor Crustal Deformation due to M7 Class Earthquakes in the Philippine Sea Plate

NASA Astrophysics Data System (ADS)

Tadokoro, K.; Ikuta, R.; Ando, M.; Okuda, T.; Sugimoto, S.; Besana, G. M.; Kuno, M.

2005-12-01

The Mw7.3 and 7.5 earthquakes (Off Kii-Peninsula Earthquakes) occurred close to the source region of the anticipated Tonankai Trough in September 5, 2004. The focal mechanisms of the two earthquakes have no low angle nodal planes, which shows that the earthquakes are intraplate earthquakes in the Philippine Sea Plate. We observed coseismic horizontal displacement due to the Off Kii-Peninsula Earthquakes by means of a system for observing seafloor crustal deformation, which is the first observation of coseismic seafloor displacement in the world. We have developed a system for observing seafloor crustal deformation. The observation system is composed of 1) acoustic measurement between a ship transducer and sea-bottom transponders, and 2) kinematic GPS positioning of the observation vessel. We have installed a seafloor benchmark close to the epicenters of the Off Kii-Peninsula Earthquakes. The benchmark is composed of three sea-bottom transponders. The location of benchmark is defined as the weight center of the three transponders. We can determine the location of benchmark with an accuracy of about 5 cm at each observation. We have repeatedly measured the seafloor benchmark six times up to now: 1) July 12-16 and 21-22, 2004, 2) November 9-10, 3) January 19, 2005, 4) May 18-20, 5) July 19-20, and 6) August 18-19 and 29-30. The Off Kii-Peninsula Earthquakes occurred during the above monitoring period. The coseismic horizontal displacement of about 21 cm toward SSE was observed at our seafloor benchmark. The displacement is 3.5 times as large as the maximum displacement observed by on land GPS network in Japan, GEONET. The monitoring of seafloor crustal deformation is effective to detect the deformations associated with earthquakes occurring in ocean areas. This study is promoted by "Research Revolution 2002" of Ministry of Education, Culture, Sports, Science and Technology, Japan. We are grateful to the captain and crews of Research Vessel, Asama, of Mie Prefectural Science and Technology Promotion Center, Japan.

Surface wave imaging of the Lithosphere-Asthenosphere system beneath 0-80 My seafloor of the equatorial Mid-Atlantic Ridge from the PI-LAB Experiment

NASA Astrophysics Data System (ADS)

Rychert, C.; Harmon, N.; Kendall, J. M.; Agius, M. R.; Tharimena, S.

2017-12-01

Oceanic lithosphere is the simplest realization of the tectonic plate, yet there are several indications that the evolution of oceanic lithosphere is more complicated than simple half space cooling models, i.e. sharp seismic discontinuities at 60-80 km depth, flattening of bathymetry at > 80 My. A deeper understanding of the complexities of oceanic lithosphere requires in situ measurements, and to date much work has focused on the Pacific ocean. The PI-LAB (Passive Imaging of the Lithosphere-Asthenosphere Boundary) experiment deployed 39 ocean bottom seismometers and 39 ocean bottom magnetotelluric instruments around the equatorial Mid Atlantic ridge from 0-80 My old seafloor. We analysed Rayleigh wave dispersion at 18-143 s period using teleseismic events and Rayleigh wave and Love wave dispersion from 5-22 s period using ambient noise. We observe both fundamental mode and first higher mode Rayleigh waves at 5 - 18 s periods, with average phase velocities that range from 1.5 km/s at 5 s period to 4.31 km/s at 143 s, and fundamental mode Love waves, with average phase velocities ranging from 4.00 km/s at 5 s to 4.51 at 22 s. We invert these phase velocities for radially anisotropic shear velocity structure and find a 60 km thick fast lid for the region with velocities of 4.62 km/s, and x values up to 1.08 indicating radial anisotropy is required in the upper 200 km. We also examined the variation in phase velocity as function seafloor age across the region using the teleseismic Rayleigh wave dataset. From 25-81 s period we find low velocities beneath young seafloor ages. We find velocity systematically increases with seafloor age. At 40 My old seafloor, the phase velocities stop increasing and flatten out. At the longest periods (> 81 s) we observe no clear relationship with seafloor age, suggesting that lithospheric thickening ceases beneath seafloor > 50 My old.

The impact of fluid advection on gas hydrate stability: Investigations at sites of methane seepage offshore Costa Rica

NASA Astrophysics Data System (ADS)

Crutchley, G. J.; Klaeschen, D.; Planert, L.; Bialas, J.; Berndt, C.; Papenberg, C.; Hensen, C.; Hornbach, M. J.; Krastel, S.; Brueckmann, W.

2014-09-01

Fluid flow through marine sediments drives a wide range of processes, from gas hydrate formation and dissociation, to seafloor methane seepage including the development of chemosynthetic ecosystems, and ocean acidification. Here, we present new seismic data that reveal the 3D nature of focused fluid flow beneath two mound structures on the seafloor offshore Costa Rica. These mounds have formed as a result of ongoing seepage of methane-rich fluids. We show the spatial impact of advective heat flow on gas hydrate stability due to the channelled ascent of warm fluids towards the seafloor. The base of gas hydrate stability (BGHS) imaged in the seismic data constrains peak heat flow values to ∼60 mW m and ∼70 mW m beneath two separate seep sites known as Mound 11 and Mound 12, respectively. The initiation of pronounced fluid flow towards these structures was likely controlled by fault networks that acted as efficient pathways for warm fluids ascending from depth. Through the gas hydrate stability zone, fluid flow has been focused through vertical conduits that we suggest developed as migrating fluids generated their own secondary permeability by fracturing strata as they forced their way upwards towards the seafloor. We show that Mound 11 and Mound 12 (about 1 km apart on the seafloor) are sustained by independent fluid flow systems through the hydrate system, and that fluid flow rates across the BGHS are probably similar beneath both mounds. 2D seismic data suggest that these two flow systems might merge at approximately 1 km depth, i.e. much deeper than the BGHS. This study provides a new level of detail and understanding of how channelled, anomalously-high fluid flow towards the seafloor influences gas hydrate stability. Thus, gas hydrate systems have good potential for quantifying the upward flow of subduction system fluids to seafloor seep sites, since the fluids have to interact with and leave their mark on the hydrate system before reaching the seafloor.

Seafloor Geodetic Observations West off Miyake-jima Island During January to April, 2001

NASA Astrophysics Data System (ADS)

Mochizuki, M.; Sato, M.; Yabuki, T.; Yoshida, Z.; Asada, A.

2001-12-01

An intensive earthquake swarm started under Miyake-jima Island, 180km south off Honshu, Japan, on June 26, 2000. The earthquake swarm migrated towards northwest off from Miyake-jima Island, where numerous earthquakes, more than 100,000, were detected within about two months and an extensive crustal deformation was observed by on-land geodetic observations. We started seafloor geodetic observation in this area to monitor seafloor deformation for the better understandings of underground magmatic activities. This poster presents summary of the observations and preliminary results from them. IIS has been developing a method of seafloor geodesy in corporation with JHD. A combination of kinematic GPS measurements and precise acoustic ranging techniques is employed to achieve centimeter-level seafloor geodesy. First observation site using the method was Kumano trough, where the Philippine Sea Plate subducts beneath Japan Islands arc. It was confirmed that the method could locate horizontal position of the seafloor reference points within 4 cm standard deviation ( Asada and Yabuki, 2001). We apply this seafloor positioning method to the observations conducted in the area west off Miyake-jima Island. Three seafloor reference systems ( Stations A, B, and C ), which consist of three or four acoustic mirror transponders, were built in triangle area surrounded by three islands, Miyake-jima, Nii-jima and Koudu-jima Islands, in November and December, 2000. This area would be deformed remarkably due to underground magma movement including magma injections from deeper part. Distances among three reference systems were set about 15 km. Stations A and B were located on the two sides of NW-SE trending seismically active area. The observations have been conducted three times until present, in January, February and April 2001. We obtained less data than we had expected due to bad sea condition in January and February observations. Also, a fast and quickly varying ocean current prevented us from keeping ship lines as they were planned at the observation in April. Although the amount and quality of the data might be less and worse than projected, analyses are going on by improving software suitable for each data set in order to extract as much information as possible from available data.

Global Seabed Materials and Habitats Mapped: The Computational Methods

NASA Astrophysics Data System (ADS)

Jenkins, C. J.

2016-02-01

What the seabed is made of has proven difficult to map on the scale of whole ocean-basins. Direct sampling and observation can be augmented with proxy-parameter methods such as acoustics. Both avenues are essential to obtain enough detail and coverage, and also to validate the mapping methods. We focus on the direct observations such as samplings, photo and video, probes, diver and sub reports, and surveyed features. These are often in word-descriptive form: over 85% of the records for site materials are in this form, whether as sample/view descriptions or classifications, or described parameters such as consolidation, color, odor, structures and components. Descriptions are absolutely necessary for unusual materials and for processes - in other words, for research. This project dbSEABED not only has the largest collection of seafloor materials data worldwide, but it uses advanced computing math to obtain the best possible coverages and detail. Included in those techniques are linguistic text analysis (e.g., Natural Language Processing, NLP), fuzzy set theory (FST), and machine learning (ML, e.g., Random Forest). These techniques allow efficient and accurate import of huge datasets, thereby optimizing the data that exists. They merge quantitative and qualitative types of data for rich parameter sets, and extrapolate where the data are sparse for best map production. The dbSEABED data resources are now very widely used worldwide in oceanographic research, environmental management, the geosciences, engineering and survey.

Coastal vulnerability and the implications of sea level rise between the cities of Pescara and Ortona (Adriatic Sea - Central Italy)

NASA Astrophysics Data System (ADS)

Tarragoni, C.; Bellotti, P.; Caputo, C.; Davoli, L.; Evangelista, S.; Pugliese, F.; Raffi, R.; Lupia Palmieri, E.

2012-04-01

Geomorphic processes induce rapid environmental changes especially along the coast that is highly susceptible to them. In addiction, the effects of storm or wave may be amplified by the expected relative sea level rise. In a context, like Italian coast, where the almost part of coast is densely populated and many infrastructures are presents, it is very important to have adequate tools to urban planning like the coastal vulnerability map. In this study the preliminary results of the ongoing SECOA project (Solution for Environmental contrasts in COastal Areas; 7th Framework Program) are presented, with reference to the Adriatic coast between Pescara and Ortona cities, in the Abruzzo region. In this work the same analytical model applied in the Venice Lagoon has been employed (Fontolan, 2001; 2005) involving the evaluation of the effective vulnerability (Ve). Ve is calculated as the difference between the potential vulnerability (Vp) and the defence elements present along the coast (D). (Ve = Vp - D) The data used to measure quantitative features are: high-resolution DEM (LiDAR), satellite images, aero photos, bathymetric profiles and topographic maps. The variables that contribute to the evaluation are: beach amplitude, berm height, seafloor gradient, seafloor evolution, recent and historical shorelines evolution for Vp; height, slope, vegetation cover, presence of passages, incipient dunes and windbreak barriers for the dune and anthropic barriers height. In this context, the potential vulnerability results from the sum of each variable (Vn) per the relative efficacy coefficient (Kn): Vp = V1K1+V2K2+ …VnKn In the same way the defences result from the sum of each kind of defence per the relative efficacy coefficient: D = D1K1+ …. DnKn The coastal area between Pescara and Ortona cities has been segmented in different sectors characterized by homogeneous values of the considered variables and for each of these the Ve values have been calculated and referred to one of the five corresponding standard vulnerability classes. In long-term vulnerability analyses (year 2100) the following aspects have been taken into account: sea level rise expected according to the IPCC and Rahmstorf hypothesis, local tectonic movement (compaction and sedimentary load) and local vertical movement due to isostasy. The height of defences have been decreased of relative sea level rise value and the efficacy coefficients have been modified according to the different long-term weight of morphological and morphodynamics variables. A coastal vulnerability map has been drawn both for the short-term (present day) and long-term; the vulnerability classes values have been represented by different colours from green to red respectively from lowest to highest values. In conclusion, the short-term results show Ve values belonging to the lowest class due to the considerable presence of the defence works, even if Vp values falling in the medium and medium-low classes. Similar results are obtained from the long-term analysis in the case of both the IPCC and Rahmstorf hypothesis, further evidencing the overwhelming employment of defence structures.

Sensitivity of seafloor bathymetry to climate-driven fluctuations in mid-ocean ridge magma supply

NASA Astrophysics Data System (ADS)

Olive, Jean-Arthur; Behn, Mark; Ito, Garrett; Escartin, Javier; Buck, Roger; Howell, Samuel

2016-04-01

Abyssal hills are the most common topographic feature on the surface of the solid Earth, yet the detailed mechanisms through which they are formed remain a matter of debate. Classical seafloor observations suggest hills acquire their shape at mid-ocean ridges through a combination of normal faulting and volcanic accretion. However, recent studies have proposed that the fabric of the seafloor reflects rapid fluctuations in ridge magma supply caused by oscillations in sea level modulating the partial melting process beneath the ridge [Crowley et al., 2015, Science]. In order to move this debate forward, we propose a modeling framework relating the magma supply of a mid-ocean ridge to the morphology of the seafloor it produces, i.e., the spacing and amplitude of abyssal hills. We specifically assess whether fluctuations in melt supply of a given periodicity can be recorded in seafloor bathymetry through (1) static compensation of crustal thickness oscillations, (2) volcanic extrusion, and (3) fault growth modulated by dike injection. We find that topography-building processes are generally insensitive to fluctuations in melt supply on time scales shorter than ~50-100 kyr. Further, we show that the characteristic wavelengths found in seafloor bathymetry across all spreading rates are best explained by simple tectono-magmatic interaction models, and require no periodic (climatic) forcing. Finally, we explore different spreading regimes where a smaller amplitude sea-level signal super-imposed on the dominant faulting signal could be most easily resolved.

Variation of Crustal Shear Velocity Structure Along the Eastern Lau Back-Arc Spreading Center Constrained By Seafloor Compliance

NASA Astrophysics Data System (ADS)

Zha, Y.; Webb, S. C.; Dunn, R. A.

2014-12-01

Measurements of seafloor compliance, the deformation under long period (typically 30-300 s) ocean wave forcing, are primarily sensitive to crustal shear velocity structure. We analyze seafloor compliance from data collected from a subset of 50 broadband Ocean Bottom Seismographs (OBS) deployed at the Eastern Lau spreading center (ELSC) from 2009 to 2010. The ELSC is a 400-km-long back-arc spreading center lying closely to the Tonga subduction trench in the southwestern Pacific. Seafloor morphology, crustal seismic structure and lava composition data show rapid variations along the ridge as the ridge migrates away from the volcanic arc front to the north, indicating a decreasing influence of the subducting slab. We calculate seafloor compliance functions by taking the spectral transfer function between the vertical displacement and pressure signal recorded by the 4-component OBSs, which are equipped with differential pressure gauges (DPGs). In the ridge perpendicular direction, compliance amplitude vary by more than an order of magnitude from the ridge crest to older seafloor covered by sediment. Along the spreading ridge, compliance measured from on-axis sites increases southwards, indicative of a decrease in the upper crustal shear velocity possibly due to increasing porosity and a thickening extrusive layer [Jacobs et al., 2007; Dunn et al., 2013]. We apply a Markov Chain Monte Carlo method to invert the compliance functions for crustal shear velocities at various locations along the ELSC.

Toward a national fuels mapping strategy: Lessons from selected mapping programs

USGS Publications Warehouse

Loveland, Thomas R.

2001-01-01

The establishment of a robust national fuels mapping program must be based on pertinent lessons from relevant national mapping programs. Many large-area mapping programs are under way in numerous Federal agencies. Each of these programs follows unique strategies to achieve mapping goals and objectives. Implementation approaches range from highly centralized programs that use tightly integrated standards and dedicated staff, to dispersed programs that permit considerable flexibility. One model facilitates national consistency, while the other allows accommodation of locally relevant conditions and issues. An examination of the programmatic strategies of four national vegetation and land cover mapping initiatives can identify the unique approaches, accomplishments, and lessons of each that should be considered in the design of a national fuel mapping program. The first three programs are the U.S. Geological Survey Gap Analysis Program, the U.S. Geological Survey National Land Cover Characterization Program, and the U.S. Fish and Wildlife Survey National Wetlands Inventory. A fourth program, the interagency Multiresolution Land Characterization Program, offers insights in the use of partnerships to accomplish mapping goals. Collectively, the programs provide lessons, guiding principles, and other basic concepts that can be used to design a successful national fuels mapping initiative.

The deep structure of a sea-floor hydrothermal deposit

USGS Publications Warehouse

Zierenberg, R.A.; Fouquet, Y.; Miller, D.J.; Bahr, J.M.; Baker, P.A.; Bjerkgard, T.; Brunner, C.A.; Duckworth, R.C.; Gable, R.; Gieskes, J.; Goodfellow, W.D.; Groschel-Becker, H. M.; Guerin, G.; Ishibashi, J.; Iturrino, G.; James, R.H.; Lackschewitz, K.S.; Marquez, L.L.; Nehlig, P.; Peter, J.M.; Rigsby, C.A.; Schultheiss, P.; Shanks, Wayne C.; Simoneit, B.R.T.; Summit, M.; Teagle, D.A.H.; Urbat, M.; Zuffa, G.G.

1998-01-01

Hydrothermal circulation at the crests of mid-ocean ridges plays an important role in transferring heat from the interior of the Earth. A consequence of this hydrothermal circulation is the formation of metallic ore bodies known as volcanic-associated massive sulphide deposits. Such deposits, preserved on land, were important sources of copper for ancient civilizations and continue to provide a significant source of base metals (for example, copper and zinc). Here we present results from Ocean Drilling Program Leg 169, which drilled through a massive sulphide deposit on the northern Juan de Fuca spreading centre and penetrated the hydrothermal feeder zone through which the metal-rich fluids reached the sea floor. We found that the style of feeder-zone mineralization changes with depth in response to changes in the pore pressure of the hydrothermal fluids and discovered a stratified zone of high-grade copper-rich replacement mineralization below the massive sulphide deposit. This copper-rich zone represents a type of mineralization not previously observed below sea-floor deposits, and may provide new targets for land-based mineral exploration.

Preface and brief synthesis for the FOODBANCS volume

NASA Astrophysics Data System (ADS)

Smith, Craig R.; DeMaster, David J.

2008-11-01

In this volume we present results from the FOODBANCS Project, which examined the fate and benthic community impact of summer bloom material on the West Antarctic Peninsula shelf floor. The project involved a 5-cruise, 15-month time-series program in which sediment-trap moorings, core sampling, radiochemical profiling, sediment respirometry, bottom photography, and bottom trawling were used to evaluate: (1) seafloor deposition and lability of POC, (2) patterns of labile POC consumption and sediment mixing by benthos, and (3) seasonal and inter-annual variations in biotic abundance, biomass, reproductive condition, recruitment, and sediment community respiration. We find that the seafloor flux and accumulation of particulate organic carbon on the West Antarctic Peninsula shelf exhibit intense seasonal and interannual variability. Nonetheless, many key benthic processes, including organic-matter degradation, bioturbation, deposit feeding, and faunal abundance, reproduction and recruitment, show relatively muted response to this intense seasonal and inter-annual variability in export flux. We thus hypothesize that benthic ecosystems on the Antarctic shelf act as "low-pass" filters, and may be extremely useful in resolving the impacts of climatic change over periods of years to decades in Antarctic Peninsula region.

New technological developments provide deep-sea sediment density flow insights: the Monterey Coordinated Canyon Experiment

NASA Astrophysics Data System (ADS)

O'Reilly, T. C.; Kieft, B.; Chaffey, M. R.; Wolfson-Schwehr, M.; Herlien, R.; Bird, L.; Klimov, D.; Paull, C. K.; Gwiazda, R.; Lundsten, E. M.; Anderson, K.; Caress, D. W.; Sumner, E. J.; Simmons, S.; Parsons, D. R.; Talling, P.; Rosenberger, K. J.; Xu, J.; Maier, K. L.; Gales, J. A.

2017-12-01

The Monterey Coordinated Canyon Experiment (CCE) deployed an array of instruments along the Monterey Canyon floor to characterize the structure, velocity and frequency of sediment flows. CCE utilized novel technologies developed at MBARI to capture sediment flow data in unprecedented detail. 1. The Seafloor Instrument Node (SIN) at 1850 meters depth housed 3 ADCPs at 3 different frequencies, CTD, current meter, oxygen optode, fluorometer/backscatter sensor, and logged data at 10 second intervals or faster. The SIN included an acoustic modem for communication with shore through a Wave Glider relay, and provided high-resolution measurements of three flow events during three successive deployments over 1.5 years. 2. Beachball-sized Benthic Event Detectors (BEDs) were deployed on or under the seafloor to measure the characteristics of sediment density flows. Each BED recorded data from a pressure sensor and a 3-axis accelerometer and gyro to characterize motions during transport events (e.g. tumble vs rotation). An acoustic modem capable of operating through more than a meter of sediment enabled communications with a ship or autonomous surface vehicle. Multiple BEDs were deployed at various depths in the canyon during CCE, detecting and measuring many transport events; one BED moved 9 km down canyon in 50 minutes during one event. 3. Wave Glider Hot Spot (HS), equipped with acoustic and RF modems, acted as data relay between SIN, BEDs and shore, and acoustically located BEDs after sediment density flows.. In some cases HS relayed BED motion data to shore within a few hours of the event. HS provided an acoustic console to the SIN, allowing shore-based users to check SIN health and status, perform maintenance, etc. 4. Mapping operations were conducted 4 times at the SIN site to quantify depositional and erosional patterns, utilizing a prototype ultra-high-resolution mapping system on the ROV Doc Ricketts. The system consists of a 400-kHz Reson 7125 multibeam sonar, a 3DatDepth SL1 subsea LiIDAR, two stereo color cameras, and a Kearfott SeaDevil INS. At a survey altitude of 3 m above the bed, the mapping system provides 5-cm resolution multibeam bathymetry, 1-cm resolution lidar bathymetry, and 2-mm resolution photomosaics. We will describe the design and full capabilities of these novel systems.

Regional variability of slope stability: Application to the Eel margin, California

USGS Publications Warehouse

Lee, H.; Locat, J.; Dartnell, P.; Israel, K.; Florence, Wong

1999-01-01

Relative values of downslope driving forces and sediment resisting forces determine the locations of submarine slope failures. Both of these vary regionally, and their impact can be addressed when the data are organized in a Geographic Information System (GIS). The study area on the continental margin near the Eel River provides an excellent opportunity to apply GIS spatial analysis techniques for evaluation of slope stability. In this area, swath bathymetric mapping shows seafloor morphology and distribution of slope steepness in fine detail, and sediment analysis of over 70 box cores delineates the variability of sediment density near the seafloor surface. Based on the results of ten geotechnical studies of submarine study areas, we developed an algorithm that relates surface sediment density to the shear strength appropriate to the type of cyclic loading produced by an earthquake. Strength and stress normalization procedures provide results that are conceptually independent of subbottom depth. Results at depth are rigorously applicable if sediment lithology does not vary significantly and consolidation state can be estimated. Otherwise, the method applies only to shallow-seated slope failure. Regional density, slope, and level of anticipated seismic shaking information were combined in a GIS framework to yield a map that illustrates the relative stability of slopes in the face of seismically induced failure. When a measure of predicted relative slope stability is draped on an oblique view of swath bathymetry, a variation in this slope stability is observed on an otherwise smooth slope along the mid-slope region north of a plunging anticline. The section of slope containing diffuse, pockmarked gullies has a lower measure of stability than a separate section containing gullies that have sharper boundaries and somewhat steeper sides. Such an association suggests that our slope-stability analysis relates to the stability of the gully sides. The remainder of the study area shows few obvious indications of slope instability except for a feature that has become known as the 'Humboldt Slide,' but it is too deep-seated to be amenable to the slope-stability-prediction techniques presented herein. In general, few slope failures have been mapped in the Eel margin study area despite the high level of seismicity, the relatively high rates of sediment accumulation, and the extent of gas charging observed by others.

Causes of earthquake spatial distribution beneath the Izu-Bonin-Mariana Arc

NASA Astrophysics Data System (ADS)

Kong, Xiangchao; Li, Sanzhong; Wang, Yongming; Suo, Yanhui; Dai, Liming; Géli, Louis; Zhang, Yong; Guo, Lingli; Wang, Pengcheng

2018-01-01

Statistics about the occurrence frequency of earthquakes (1973-2015) at shallow, intermediate and great depths along the Izu-Bonin-Mariana (IBM) Arc is presented and a percent perturbation relative to P-wave mean value (LLNL-G3Dv3) is adopted to show the deep structure. The correlation coefficient between the subduction rate and the frequency of shallow seismic events along the IBM is 0.605, proving that the subduction rate is an important factor for shallow seismic events. The relationship between relief amplitudes of the seafloor and earthquake occurrences implies that some seamount chains riding on the Pacific seafloor may have an effect on intermediate-depth seismic events along the IBM. A probable hypothesis is proposed that the seamounts or surrounding seafloor with high degree of fracture may bring numerous hydrous minerals into the deep and may result in a different thermal structure compared to the seafloor where no seamounts are subducted. Fluids from the seamounts or surrounding seafloor are released to trigger earthquakes at intermediate-depth. Deep events in the northern and southern Mariana arc are likely affected by a horizontal propagating tear parallel to the trench.

Pockmark asymmetry and seafloor currents in the Santos Basin offshore Brazil

USGS Publications Warehouse

Schattner, U.; Lazar, M.; Souza, L. A. P.; ten Brink, Uri S.; Mahiques, M. M.

2016-01-01

Pockmarks form by gas/fluid expulsion into the ocean and are preserved under conditions of negligible sedimentation. Ideally, they are circular at the seafloor and symmetrical in profile. Elliptical pockmarks are more enigmatic. They are associated with seafloor currents while asymmetry is connected to sedimentation patterns. This study examines these associations through morphological analysis of new multibeam data collected across the Santos continental slope offshore Brazil in 2011 (353–865 mbsl). Of 984 pockmarks, 78% are both elliptical and asymmetric. Geometric criteria divide the pockmarks into three depth ranges that correlate with a transition between two currents: the Brazil Current transfers Tropical Water and South Atlantic Central Water southwestwards while the Intermediate Western Boundary Current transfers Antarctic Intermediate Water northeastwards. It is suggested that the velocity of seafloor currents and their persistence dictate pockmark ellipticity, orientation and profile asymmetry. Fast currents (>20 cm/s) are capable of maintaining pockmark flank steepness close to the angle of repose. These morphological expressions present direct evidence for an edge effect of the South Atlantic Subtropical Gyre and, in general, provide a correlation between pockmark geometry and seafloor currents that can be applied at other locations worldwide.

Motional Induction by Tsunamis and Ocean Tides: 10 Years of Progress

NASA Astrophysics Data System (ADS)

Minami, Takuto

2017-09-01

Motional induction is the process by which the motion of conductive seawater in the ambient geomagnetic main field generates electromagnetic (EM) variations, which are observable on land, at the seafloor, and sometimes at satellite altitudes. Recent years have seen notable progress in our understanding of motional induction associated with tsunamis and with ocean tides. New studies of tsunami motional induction were triggered by the 2004 Sumatra earthquake tsunami and further promoted by subsequent events, such as the 2010 Chile earthquake and the 2011 Tohoku earthquake. These events yielded observations of tsunami-generated EM variations from land and seafloor stations. Studies of magnetic fields generated by ocean tides attracted interest when the Swarm satellite constellation enabled researchers to monitor tide-generated magnetic variations from low Earth orbit. Both avenues of research benefited from the advent of sophisticated seafloor instruments, by which we may exploit motional induction for novel applications. For example, seafloor EM measurements can serve as detectors of vector properties of tsunamis, and seafloor EM data related to ocean tides have proved useful for sounding Earth's deep interior. This paper reviews and discusses the progress made in motional induction studies associated with tsunamis and ocean tides during the last decade.

Investigating the emission, dissolution, and oxidation of CH4 within and around a seep bubble plume in the Gulf of Mexico.

NASA Astrophysics Data System (ADS)

Leonte, M.; Kessler, J. D.; Socolofsky, S. A.

2016-02-01

One of the largest carbon reservoirs on the planet is stored as methane (CH4) in and below the seafloor. However, a large discrepancy exists between estimated fluxes of CH4 into the water column and CH4 fluxes from the sea surface to the atmosphere, suggesting that a significant fraction of CH4 released from seafloor seeps is dissolved and potentially removed through microbial oxidation. Here we present data investigating the fate of CH4 released from the Sleeping Dragon seep site in the Gulf of Mexico. The bubble plume was followed from the seafloor until it fully dissolved using a remotely operated vehicle (ROV). Water samples were collected by the ROV at different depths as well as lateral transects through the bubble plume. These samples were analyzed for dissolved concentrations of methane, ethane, propane, and butane as well as the 13C isotopic ratio of methane. Furthermore, seep bubbles from the seafloor were also collected and analyzed for the same properties. Based on these chemical data, the rate of CH4 emission from the seafloor, oxidation in the water column, and dissolution are investigated.

Landforms of the conterminous United States: a digital shaded-relief portrayal

USGS Publications Warehouse

Thelin, Gail P.; Pike, Richard J.

1991-01-01

Our map was made by digital image-processing, a technical specialty related to the broader fields of computer graphics and machine vision (Dawson, 1987; Kennie and McLaren, 1988). The technology includes the many spacially based operations first brought together and developed systematically to manipulate Ranger, Mariner, Landsat, and other images that are reassembled from spacecraft telemetry in a raster or scan-line arrangement of square-grid elements (Nathan, 1966; Castleman, 1979; Sheldon, 1987). These computer procedures have been successfully transferred to landform analysis from remote-sensing applications by substituting terrain heights or sea-floor depths for the customary values of electromagnetic radiation obtained from satellites an stored in digital arrays of pixels (Batson and others, 1975).

Activities for Plate Tectonics using GeoMapApp

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.

2016-12-01

The concept of plate tectonics is a fundamental component of our understanding of how Earth works yet authentic, high-quality geoscience data related to plate tectonics may not be readily available to all students. To compound matters, when data is accessible, students may not possess the skills or resources necessary to explore and analyse it. As a result, much emphasis at federal and state level is now placed upon encouraging students to work with more data and more technology more often and more rigourously. Easy-to-use digital platforms offer much potential for promoting inquiry-based learning at all levels of education. GeoMapApp is one such tool. Developed at Columbia University's Lamont-Doherty Earth Observatory, GeoMapApp (http://www.geomapapp.org) is a free resource that integrates a wide range of research-grade geoscience data in one intuitive map-based interface. Simple strategies for data manipulation, visualisation and presentation allow uses to explore the data in meaningful ways. Layering and transparency capabilities further allow learners to use GeoMapApp to compare multiple data sets at once, and high-impact Save Session functionality allows a GeoMapApp project to be saved for sharing or later use. In this presentation, activities related to plate tectonics will be highlighted. One GeoMapApp activity helps students investigate plate boundaries by exploring earthquake and volcano locations. Another requires students to calculate the rate of seafloor spreading using crustal age data in various ocean basins. A third uses the GeoMapApp layering technique to explore the influence of geological forces in shaping the landscape. Each activity shown can be done by students on an individual basis, as pairs, or as groups. Educators report that student use of GeoMapApp fosters an increased sense of data "ownership" amongst students, promotes STEM skills, and provides them with access to authentic research-grade geoscience data using the same cutting-edge technological tool used by researchers.

The Influence of Ridge Geometry at the Ultraslow-Spreading Southwest Indiean Ridge (9 deg - 25 deg E): Basalt Composition Sensitivity to Variations in Source and Process

DTIC Science & Technology

2006-02-01

East Pacific Rise , 5 degrees 30’-14 degrees 30’ N , Natures, 322, 422-429. Langmuir, C. H., E. M. Klein, and T. Plank (1992...Mantle source heterogeneity and melting processes beneath seafloor spreading centers: The East Pacific Rise , 18 degrees -19 degrees S, Journal of... East Pacific Rise , Aumento, F., and H. Loubat, The Mid-Atlantic Ridge Near Proc. Ocean Drill. Program Sci. Results, 147, 103-134,

Linking Metabolic Activity, Microbial Identity, and Microscale Spatial Arrangements in Chemosynthetic Seafloor Habitats

NASA Astrophysics Data System (ADS)

Marlow, J.; Hatzenpichler, R.; Girguis, P.

2018-05-01

With an innovative combination of metabolic tracers, fluorescent probes, and microscopy, we present a novel way to pinpoint the geobiological drivers of metabolic activity at silicate and carbonate-based chemosynthetic seafloor habitats.

Sensitivity of seafloor bathymetry to climate-driven fluctuations in mid-ocean ridge magma supply.

PubMed

Olive, J-A; Behn, M D; Ito, G; Buck, W R; Escartín, J; Howell, S

2015-10-16

Recent studies have proposed that the bathymetric fabric of the seafloor formed at mid-ocean ridges records rapid (23,000 to 100,000 years) fluctuations in ridge magma supply caused by sealevel changes that modulate melt production in the underlying mantle. Using quantitative models of faulting and magma emplacement, we demonstrate that, in fact, seafloor-shaping processes act as a low-pass filter on variations in magma supply, strongly damping fluctuations shorter than about 100,000 years. We show that the systematic decrease in dominant seafloor wavelengths with increasing spreading rate is best explained by a model of fault growth and abandonment under a steady magma input. This provides a robust framework for deciphering the footprint of mantle melting in the fabric of abyssal hills, the most common topographic feature on Earth. Copyright © 2015, American Association for the Advancement of Science.

Predicted Deepwater Bathymetry from Satellite Altimetry: Non-Fourier Transform Alternatives

NASA Astrophysics Data System (ADS)

Salazar, M.; Elmore, P. A.

2017-12-01

Robert Parker (1972) demonstrated the effectiveness of Fourier Transforms (FT) to compute gravitational potential anomalies caused by uneven, non-uniform layers of material. This important calculation relates the gravitational potential anomaly to sea-floor topography. As outlined by Sandwell and Smith (1997), a six-step procedure, utilizing the FT, then demonstrated how satellite altimetry measurements of marine geoid height are inverted into seafloor topography. However, FTs are not local in space and produce Gibb's phenomenon around discontinuities. Seafloor features exhibit spatial locality and features such as seamounts and ridges often have sharp inclines. Initial tests compared the windowed-FT to wavelets in reconstruction of the step and saw-tooth functions and resulted in lower RMS error with fewer coefficients. This investigation, thus, examined the feasibility of utilizing sparser base functions such as the Mexican Hat Wavelet, which is local in space, to first calculate the gravitational potential, and then relate it to sea-floor topography.

Gene expression in the deep biosphere.

PubMed

Orsi, William D; Edgcomb, Virginia P; Christman, Glenn D; Biddle, Jennifer F

2013-07-11

Scientific ocean drilling has revealed a deep biosphere of widespread microbial life in sub-seafloor sediment. Microbial metabolism in the marine subsurface probably has an important role in global biogeochemical cycles, but deep biosphere activities are not well understood. Here we describe and analyse the first sub-seafloor metatranscriptomes from anaerobic Peru Margin sediment up to 159 metres below the sea floor, represented by over 1 billion complementary DNA (cDNA) sequence reads. Anaerobic metabolism of amino acids, carbohydrates and lipids seem to be the dominant metabolic processes, and profiles of dissimilatory sulfite reductase (dsr) transcripts are consistent with pore-water sulphate concentration profiles. Moreover, transcripts involved in cell division increase as a function of microbial cell concentration, indicating that increases in sub-seafloor microbial abundance are a function of cell division across all three domains of life. These data support calculations and models of sub-seafloor microbial metabolism and represent the first holistic picture of deep biosphere activities.

Geoscience techniques for engineering assessment of Oman to India pipeline route

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baerenwald, P.D.; Mullee, J.E.; Campbell, K.J.

1996-12-31

A variety of geoscience techniques were used to define soil conditions and evaluate geologic processes in order to develop design criteria for complex segments of the proposed Oman to Indian pipeline route. Geophysical survey data, seafloor cores, ROV observation of the seafloor, and oceanographic measurements were the principal field data collected. Geotechnical soil testing, and X-ray radiography, detailed geologic logging, and C-14 age dating of cores were carried out. The diverse sets of field data and lab test results were integrated by a multi-disciplined team of geoscientists and engineers to develop geologic and soil models, soil design criteria, a turbidmore » flow model, and seafloor stability models. The integrated approach used here is applicable to other complex areas where seafloor stability needs to be assessed or design criteria need to be developed for active geologic processes.« less

The microbiology of deep-sea hydrothermal vent plumes: ecological and biogeographic linkages to seafloor and water column habitats.

PubMed

Dick, Gregory J; Anantharaman, Karthik; Baker, Brett J; Li, Meng; Reed, Daniel C; Sheik, Cody S

2013-01-01

Hydrothermal plumes are an important yet understudied component of deep-sea vent microbial ecosystems. The significance of plume microbial processes can be appreciated from three perspectives: (1) mediation of plume biogeochemistry, (2) dispersal of seafloor hydrothermal vent microbes between vents sites, (3) as natural laboratories for understanding the ecology, physiology, and function of microbial groups that are distributed throughout the pelagic deep sea. Plume microbiology has been largely neglected in recent years, especially relative to the extensive research conducted on seafloor and subseafloor systems. Rapidly advancing technologies for investigating microbial communities provide new motivation and opportunities to characterize this important microbial habitat. Here we briefly highlight microbial contributions to plume and broader ocean (bio)geochemistry and review recent work to illustrate the ecological and biogeographic linkages between plumes, seafloor vent habitats, and other marine habitats such as oxygen minimum zones (OMZs), cold seeps, and oil spills. 16S rRNA gene surveys and metagenomic/-transcriptomic data from plumes point to dominant microbial populations, genes, and functions that are also operative in OMZs (SUP05, ammonia-oxidizing Archaea, and SAR324 Deltaproteobacteria) and hydrocarbon-rich environments (methanotrophs). Plume microbial communities are distinct from those on the seafloor or in the subsurface but contain some signatures of these habitats, consistent with the notion that plumes are potential vectors for dispersal of microorganisms between seafloor vent sites. Finally, we put forward three pressing questions for the future of deep-sea hydrothermal plume research and consider interactions between vents and oceans on global scales.

The microbiology of deep-sea hydrothermal vent plumes: ecological and biogeographic linkages to seafloor and water column habitats

PubMed Central

Dick, Gregory J.; Anantharaman, Karthik; Baker, Brett J.; Li, Meng; Reed, Daniel C.; Sheik, Cody S.

2013-01-01

Hydrothermal plumes are an important yet understudied component of deep-sea vent microbial ecosystems. The significance of plume microbial processes can be appreciated from three perspectives: (1) mediation of plume biogeochemistry, (2) dispersal of seafloor hydrothermal vent microbes between vents sites, (3) as natural laboratories for understanding the ecology, physiology, and function of microbial groups that are distributed throughout the pelagic deep sea. Plume microbiology has been largely neglected in recent years, especially relative to the extensive research conducted on seafloor and subseafloor systems. Rapidly advancing technologies for investigating microbial communities provide new motivation and opportunities to characterize this important microbial habitat. Here we briefly highlight microbial contributions to plume and broader ocean (bio)geochemistry and review recent work to illustrate the ecological and biogeographic linkages between plumes, seafloor vent habitats, and other marine habitats such as oxygen minimum zones (OMZs), cold seeps, and oil spills. 16S rRNA gene surveys and metagenomic/-transcriptomic data from plumes point to dominant microbial populations, genes, and functions that are also operative in OMZs (SUP05, ammonia-oxidizing Archaea, and SAR324 Deltaproteobacteria) and hydrocarbon-rich environments (methanotrophs). Plume microbial communities are distinct from those on the seafloor or in the subsurface but contain some signatures of these habitats, consistent with the notion that plumes are potential vectors for dispersal of microorganisms between seafloor vent sites. Finally, we put forward three pressing questions for the future of deep-sea hydrothermal plume research and consider interactions between vents and oceans on global scales. PMID:23720658

Seafloor Volcanic and Structural Features Adjacent to the 90deg 50'N Transform - Galapagos Spreading Center: Clues for Understanding Plate Boundary Kinematics and Lithospheric Melting Processes (Invited)

NASA Astrophysics Data System (ADS)

Fornari, D. J.; Soule, S.; Harpp, K. S.; Mittelstaedt, E. L.; Geist, D.; Kurz, M. D.; R/v Melville Mv1007 Cruise Scientific Party

2010-12-01

High-resolution EM122 multibeam and MR-1 sidescan sonar data collected over a wide area of seafloor west and east of the 90deg 50’N transform along the Galapagos Spreading Center (GSC) reveal seafloor morpho-structural fabric created along this intermediate spreading plate boundary. In concert with geochemical and geophysical data collected during the cruise, these data will be used to help unravel the kinematics of hotspot-ridge interactions in the northern Galapagos. West of the transform, the seafloor is dominated by three prominent NW-SE trending seamount lineaments, each ~20-30 km wide, including the prominent Wolf-Darwin Lineament (WDL) as well as two other smaller volcanic chains east of the WDL, which are oriented along intermediate trends that become more subparallel to the N-S trend of the transform from west to east. This suggests a possible strong controlling influence of the transform on the orientation of lithospheric fractures involved in supplying magmas to the volcanic centers. Interestingly, each seamount lineament west of the transform appears to have nascent volcanoes nucleating immediately south of the GSC axis at locations that mark along-axis discontinuities of the spreading center, suggesting ridge-related magmatic focusing is also influencing crustal generation on the Nazca plate in this region. The tectonized terrain associated with the transform is 60 km wide, whereas the transform valley is only 20 km wide. The northern 40 km of the transform has a well-defined linear shear zone and bounding faults. The southern 50 km of the transform are characterized by a wide zone of extensive oblique shear structures that trend NW-SE. Within this zone are numerous small volcanic cones and ridges that decorate the margins and axis of the transform domain. The structural evolution of the transform appears to be undergoing a transition along its length with intra-transform volcanism in the south and more normal shear in the north, however the tectonic imprint of the oblique structures is observed along nearly all of the length of the transform out to 15-20 km from the margins of the transform valley. Terrain east of the transform is markedly different in morphological character and structural elements. A series of five, generally E-W ridges, some of which display clear volcanic constructional terrain, extend from the eastern margin of the oblique fabric associated with the transform domain. Some of these E-W features are linked by N-S structures, creating a general patchwork pattern of seafloor that is unlike any we have observed at well-mapped ridge-transform intersections at fast and intermediate spreading mid-ocean ridges. The terrain bears some similarities to structures developed at microplates. We also note that this region lies at the southwestern extremity of the Cocos Ridge, an aseismic ridge that has undergone a complex history of volcanic and tectonic construction associated with hotspot magmatism and ridge jumps.