Septal secretion of protein A in Staphylococcus aureus requires SecA and lipoteichoic acid synthesis

PubMed Central

Yu, Wenqi; Missiakas, Dominique

2018-01-01

Surface proteins of Staphylococcus aureus are secreted across septal membranes for assembly into the bacterial cross-wall. This localized secretion requires the YSIRK/GXXS motif signal peptide, however the mechanisms supporting precursor trafficking are not known. We show here that the signal peptide of staphylococcal protein A (SpA) is cleaved at the YSIRK/GXXS motif. A SpA signal peptide mutant defective for YSIRK/GXXS cleavage is also impaired for septal secretion and co-purifies with SecA, SecDF and LtaS. SecA depletion blocks precursor targeting to septal membranes, whereas deletion of secDF diminishes SpA secretion into the cross-wall. Depletion of LtaS blocks lipoteichoic acid synthesis and abolishes SpA precursor trafficking to septal membranes. We propose a model whereby SecA directs SpA precursors to lipoteichoic acid-rich septal membranes for YSIRK/GXXS motif cleavage and secretion into the cross-wall. PMID:29757141

Inclusion...Through Storytelling: Proposal for Interest Group for SECA Conference.

ERIC Educational Resources Information Center

Cloud, Debbie

A proposed position statement for a Southern Early Childhood Association (SECA) conference session focusing on children with special needs in the regular educational program is presented in the document. The proposal highlights the importance of inclusion of those children in a regular educational program and the need for caregivers to be able to…

Cloning, purification, crystallization and preliminary crystallographic analysis of SecA from Enterococcus faecalis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meining, Winfried, E-mail: wim@csb.ki.se; Scheuring, Johannes; Fischer, Markus

2006-06-01

SecA ATPase from E. faecalis has been cloned, overexpressed, purified and crystallized. Crystals belong to space group C2 and diffract to 2.4 Å resolution. The gene coding for SecA from Enterococcus faecalis was cloned and overexpressed in Escherichia coli. In this protein, the lysine at position 6 was replaced by an asparagine in order to reduce sensitivity towards proteases. The modified protein was purified and crystallized. Crystals diffracting to 2.4 Å resolution were obtained using the vapour-diffusion technique. The crystals belong to the monoclinic space group C2, with unit-cell parameters a = 203.4, b = 49.8, c = 100.8 Å,more » α = γ = 90.0, β = 119.1°. A selenomethionine derivative was prepared and is currently being tested in crystallization trials.« less

Inhibitory effects of anthocyanins on secretion of Helicobacter pylori CagA and VacA toxins.

PubMed

Kim, Sa-Hyun; Park, Min; Woo, Hyunjun; Tharmalingam, Nagendran; Lee, Gyusang; Rhee, Ki-Jong; Eom, Yong Bin; Han, Sang Ik; Seo, Woo Duck; Kim, Jong Bae

2012-01-01

Anthocyanins have been studied as potential antimicrobial agents against Helicobacter pylori. We investigated whether the biosynthesis and secretion of cytotoxin-associated protein A (CagA) and vacuolating cytotoxin A (VacA) could be suppressed by anthocyanin treatment in vitro. H. pylori reference strain 60190 (CagA(+)/VacA(+)) was used in this study to investigate the inhibitory effects of anthocyanins; cyanidin 3-O-glucoside (C3G), peonidin 3-O-glucoside (Peo3G), pelargonidin 3-O-glucoside (Pel3G), and malvidin 3-O-glucoside (M3G) on expression and secretion of H. pylori toxins. Anthocyanins were added to bacterial cultures and Western blotting was used to determine secretion of CagA and VacA. Among them, we found that C3G inhibited secretion of CagA and VacA resulting in intracellular accumulation of CagA and VacA. C3G had no effect on cagA and vacA expression but suppressed secA transcription. As SecA is involved in translocation of bacterial proteins, the down-regulation of secA expression by C3G offers a mechanistic explanation for the inhibition of toxin secretion. To our knowledge, this is the first report suggesting that C3G inhibits secretion of the H. pylori toxins CagA and VacA via suppression of secA transcription.

Inhibitory Effects of Anthocyanins on Secretion of Helicobacter pylori CagA and VacA Toxins

PubMed Central

Kim, Sa-Hyun; Park, Min; Woo, Hyunjun; Tharmalingam, Nagendran; Lee, Gyusang; Rhee, Ki-Jong; Eom, Yong Bin; Han, Sang Ik; Seo, Woo Duck; Kim, Jong Bae

2012-01-01

Anthocyanins have been studied as potential antimicrobial agents against Helicobacter pylori. We investigated whether the biosynthesis and secretion of cytotoxin-associated protein A (CagA) and vacuolating cytotoxin A (VacA) could be suppressed by anthocyanin treatment in vitro. H. pylori reference strain 60190 (CagA+/VacA+) was used in this study to investigate the inhibitory effects of anthocyanins; cyanidin 3-O-glucoside (C3G), peonidin 3-O-glucoside (Peo3G), pelargonidin 3-O-glucoside (Pel3G), and malvidin 3-O-glucoside (M3G) on expression and secretion of H. pylori toxins. Anthocyanins were added to bacterial cultures and Western blotting was used to determine secretion of CagA and VacA. Among them, we found that C3G inhibited secretion of CagA and VacA resulting in intracellular accumulation of CagA and VacA. C3G had no effect on cagA and vacA expression but suppressed secA transcription. As SecA is involved in translocation of bacterial proteins, the down-regulation of secA expression by C3G offers a mechanistic explanation for the inhibition of toxin secretion. To our knowledge, this is the first report suggesting that C3G inhibits secretion of the H. pylori toxins CagA and VacA via suppression of secA transcription. PMID:23155357

Analysis of the Isolated SecA DEAD Motor Suggests a Mechanism for Chemical-Mechanical Coupling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nithianantham, Stanley; Shilton, Brian H

The preprotein cross-linking domain and C-terminal domains of Escherichia coli SecA were removed to create a minimal DEAD motor, SecA-DM. SecA-DM hydrolyzes ATP and has the same affinity for ADP as full-length SecA. The crystal structure of SecA-DM in complex with ADP was solved and shows the DEAD motor in a closed conformation. Comparison with the structure of the E. coli DEAD motor in an open conformation (Protein Data Bank ID 2FSI) indicates main-chain conformational changes in two critical sequences corresponding to Motif III and Motif V of the DEAD helicase family. The structures that the Motif III and Motifmore » V sequences adopt in the DEAD motor open conformation are incompatible with the closed conformation. Therefore, when the DEAD motor makes the transition from open to closed, Motif III and Motif V are forced to change their conformations, which likely functions to regulate passage through the transition state for ATP hydrolysis. The transition state for ATP hydrolysis for the SecA DEAD motor was modeled based on the conformation of the Vasa helicase in complex with adenylyl imidodiphosphate and RNA (Protein Data Bank ID 2DB3). A mechanism for chemical-mechanical coupling emerges, where passage through the transition state for ATP hydrolysis is hindered by the conformational changes required in Motif III and Motif V, and may be promoted by binding interactions with the preprotein substrate and/or other translocase domains and subunits.« less

Analysis of the Isolated SecA DEAD Motor Suggests a Mechanism for Chemical-Mechanical Coupling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nithianantham, Stanley; Shilton, Brian H

2011-09-28

The preprotein cross-linking domain and C-terminal domains of Escherichia coli SecA were removed to create a minimal DEAD motor, SecA-DM. SecA-DM hydrolyzes ATP and has the same affinity for ADP as full-length SecA. The crystal structure of SecA-DM in complex with ADP was solved and shows the DEAD motor in a closed conformation. Comparison with the structure of the E. coli DEAD motor in an open conformation (Protein Data Bank ID 2FSI) indicates main-chain conformational changes in two critical sequences corresponding to Motif III and Motif V of the DEAD helicase family. The structures that the Motif III and Motifmore » V sequences adopt in the DEAD motor open conformation are incompatible with the closed conformation. Therefore, when the DEAD motor makes the transition from open to closed, Motif III and Motif V are forced to change their conformations, which likely functions to regulate passage through the transition state for ATP hydrolysis. The transition state for ATP hydrolysis for the SecA DEAD motor was modeled based on the conformation of the Vasa helicase in complex with adenylyl imidodiphosphate and RNA (Protein Data Bank ID 2DB3). A mechanism for chemical-mechanical coupling emerges, where passage through the transition state for ATP hydrolysis is hindered by the conformational changes required in Motif III and Motif V, and may be promoted by binding interactions with the preprotein substrate and/or other translocase domains and subunits.« less

The Victoria West: earliest prepared core technology in the Acheulean at Canteen Kopje and implications for the cognitive evolution of early hominids.

PubMed

Li, Hao; Kuman, Kathleen; Lotter, Matt G; Leader, George M; Gibbon, Ryan J

2017-06-01

Prepared core technology illustrates in-depth planning and the presence of a mental template during the core reduction process. This technology is, therefore, a significant indicator in studying the evolution of abstract thought and the cognitive abilities of hominids. Here, we report on Victoria West cores excavated from the Canteen Kopje site in central South Africa, with a preliminary age estimate of approximately 1 Ma (million years ago) for these cores. Technological analysis shows that the Victoria West cores bear similarities to the 'Volumetric Concept' as defined for the Levallois, a popular and widely distributed prepared core technology from at least 200 ka (thousand years ago). Although these similarities are present, several notable differences also occur that make the Victoria West a unique and distinctive prepared core technology; these are: elongated and convergent core shapes, consistent blow directions for flake removal, a predominance of large side-struck flakes, and the use of these flakes to make Acheulean large cutting tools. This innovative core reduction strategy at Canteen Kopje extends the roots of prepared core technology to the latter part of the Early Acheulean and clearly demonstrates an increase in the cognitive abilities and complexities of hominids in this time period.

[Evaluation of new and emerging health technologies. Proposal for classification].

PubMed

Prados-Torres, J D; Vidal-España, F; Barnestein-Fonseca, P; Gallo-García, C; Irastorza-Aldasoro, A; Leiva-Fernández, F

2011-01-01

Review and develop a proposal for the classification of health technologies (HT) evaluated by the Health Technology Assessment Agencies (HTAA). Peer review of AETS of the previous proposed classification of HT. Analysis of their input and suggestions for amendments. Construction of a new classification. Pilot study with physicians. Andalusian Public Health System. Spanish HTAA. Experts from HTAA. Tutors of family medicine residents. HT Update classification previously made by the research team. Peer review by Spanish HTAA. Qualitative and quantitative analysis of responses. Construction of a new and pilot study based on 12 evaluation reports of the HTAA. We obtained 11 thematic categories that are classified into 6 major head groups: 1, prevention technology; 2, diagnostic technology; 3, therapeutic technologies; 4, diagnostic and therapeutic technologies; 5, organizational technology, and 6, knowledge management and quality of care. In the pilot there was a good concordance in the classification of 8 of the 12 reports reviewed by physicians. Experts agree on 11 thematic categories of HT. A new classification of HT with double entry (Nature and purpose of HT) is proposed. APPLICABILITY: According to experts, the classification of the work of the HTAA may represent a useful tool to transfer and manage knowledge. Moreover, an adequate classification of the HTAA reports would help clinicians and other potential users to locate them and this can facilitate their dissemination. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

The bacterial Sec system is required for the organization and function of the MreB cytoskeleton

PubMed Central

2017-01-01

The Sec system is responsible for protein insertion, translocation and secretion across membranes in all cells. The bacterial actin homolog MreB controls various processes, including cell wall synthesis, membrane organization and polarity establishment. Here we show that the two systems genetically interact and that components of the Sec system, especially the SecA motor protein, are essential for spatiotemporal organization of MreB in E. coli, as evidenced by the accumulation of MreB at irregular sites in Sec-impaired cells. MreB mislocalization in SecA-defective cells significantly affects MreB-coordinated processes, such as cell wall synthesis, and induce formation of membrane invaginations enriched in high fluidity domains. Additionally, MreB is not recruited to the FtsZ ring in secA mutant cells, contributing to division arrest and cell filamentation. Our results show that all these faults are due to improper targeting of MreB to the membrane in the absence of SecA. Thus, when we reroute RodZ, MreB membrane-anchor, by fusing it to a SecA-independent integral membrane protein and overproducing it, MreB localization is restored and the defect in cell division is corrected. Notably, the RodZ moiety is not properly inserted into the membrane, strongly suggesting that it only serves as a bait for placing MreB around the cell circumference. Finally, we show that MreB localization depends on SecA also in C. crescentus, suggesting that regulation of MreB by the Sec system is conserved in bacteria. Taken together, our data reveal that the secretion system plays an important role in determining the organization and functioning of the cytoskeletal system in bacteria. PMID:28945742

The bacterial Sec system is required for the organization and function of the MreB cytoskeleton.

PubMed

Govindarajan, Sutharsan; Amster-Choder, Orna

2017-09-01

The Sec system is responsible for protein insertion, translocation and secretion across membranes in all cells. The bacterial actin homolog MreB controls various processes, including cell wall synthesis, membrane organization and polarity establishment. Here we show that the two systems genetically interact and that components of the Sec system, especially the SecA motor protein, are essential for spatiotemporal organization of MreB in E. coli, as evidenced by the accumulation of MreB at irregular sites in Sec-impaired cells. MreB mislocalization in SecA-defective cells significantly affects MreB-coordinated processes, such as cell wall synthesis, and induce formation of membrane invaginations enriched in high fluidity domains. Additionally, MreB is not recruited to the FtsZ ring in secA mutant cells, contributing to division arrest and cell filamentation. Our results show that all these faults are due to improper targeting of MreB to the membrane in the absence of SecA. Thus, when we reroute RodZ, MreB membrane-anchor, by fusing it to a SecA-independent integral membrane protein and overproducing it, MreB localization is restored and the defect in cell division is corrected. Notably, the RodZ moiety is not properly inserted into the membrane, strongly suggesting that it only serves as a bait for placing MreB around the cell circumference. Finally, we show that MreB localization depends on SecA also in C. crescentus, suggesting that regulation of MreB by the Sec system is conserved in bacteria. Taken together, our data reveal that the secretion system plays an important role in determining the organization and functioning of the cytoskeletal system in bacteria.

All-in-one assembly based on 3D-intertangled and cross-jointed architectures of Si/Cu 1D-nanowires for lithium ion batteries

PubMed Central

Hwang, Chihyun; Kim, Tae-Hee; Cho, Yoon-Gyo; Kim, Jieun; Song, Hyun-Kon

2015-01-01

All-in-one assemblies of separator, electrode and current collector (SECA) for lithium ion batteries are presented by using 1D nanowires of Si and Cu (nwSi and nwCu). Even without binders, integrity of SECA is secured via structural joints based on ductility of Cu as well as entanglement of nwSi and nwCu. By controlling the ratio of the nanowires, the number of contact points and voids accommodating volume expansion of Si active material are tunable. Zero volume expansion and high energy density are simultaneously achievable by the architecture. PMID:25720334

Dynamic distribution of the SecA and SecY translocase subunits and septal localization of the HtrA surface chaperone/protease during Streptococcus pneumoniae D39 cell division.

PubMed

Tsui, Ho-Ching Tiffany; Keen, Susan K; Sham, Lok-To; Wayne, Kyle J; Winkler, Malcolm E

2011-01-01

The Sec translocase pathway is the major route for protein transport across and into the cytoplasmic membrane of bacteria. Previous studies reported that the SecA translocase ATP-binding subunit and the cell surface HtrA protease/chaperone formed a single microdomain, termed "ExPortal," in some species of ellipsoidal (ovococcus) Gram-positive bacteria, including Streptococcus pyogenes. To investigate the generality of microdomain formation, we determined the distribution of SecA and SecY by immunofluorescent microscopy in Streptococcus pneumoniae (pneumococcus), which is an ovococcus species evolutionarily distant from S. pyogenes. In the majority (≥ 75%) of exponentially growing cells, S. pneumoniae SecA (SecA (Spn)) and SecY (Spn) located dynamically in cells at different stages of division. In early divisional cells, both Sec subunits concentrated at equators, which are future sites of constriction. Further along in division, SecA(Spn) and SecY(Spn) remained localized at mid-cell septa. In late divisional cells, both Sec subunits were hemispherically distributed in the regions between septa and the future equators of dividing cells. In contrast, the HtrA (Spn) homologue localized to the equators and septa of most (> 90%) dividing cells, whereas the SrtA(Spn) sortase located over the surface of cells in no discernable pattern. This dynamic pattern of Sec distribution was not perturbed by the absence of flotillin family proteins, but was largely absent in most cells in early stationary phase and in cls mutants lacking cardiolipin synthase. These results do not support the existence of an ExPortal microdomain in S. pneumoniae. Instead, the localization of the pneumococcal Sec translocase depends on the stage of cell division and anionic phospholipid content. Two patterns of Sec translocase distribution, an ExPortal microdomain in certain ovococcus-shaped species like Streptococcus pyogenes and a spiral pattern in rod-shaped species like Bacillus subtilis, have been reported for Gram-positive bacteria. This study provides evidence for a third pattern of Sec localization in the ovococcus human pathogen Streptococcus pneumoniae. The SecA motor and SecY channel subunits of the Sec translocase localize dynamically to different places in the mid-cell region during the division cycle of exponentially growing, but not stationary-phase, S. pneumoniae. Unexpectedly, the S. pneumoniae HtrA (HtrA(Spn)) protease/chaperone principally localizes to cell equators and division septa. The coincident localization of SecA(Spn), SecY (Spn), and HtrA (Spn) to regions of peptidoglycan (PG) biosynthesis in unstressed, growing cells suggests that the pneumococcal Sec translocase directs assembly of the PG biosynthesis apparatus to regions where it is needed during division and that HtrA(Spn) may play a general role in quality control of proteins exported by the Sec translocase.

INNOVATIVE TECHNOLOGY EVALUATION REPORT, SEDIMENT SAMPLING TECHNOLOGY, ART'S MANUFACTURING, SPLIT CORE SAMPLER FOR SUBMERGED SEDIMENTS

EPA Science Inventory

The Split Core Sampler for Submerged Sediments (Split Core Sampler) designed and fabricated by Arts Manufacturing & Supply, Inc., was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation Program in April and May 1999 at ...

[Efficiency indicators to contribute to sustainability of health services in Spain].

PubMed

García, E I; Mira Solves, J J; Guilabert Mora, M

2014-01-01

Identifying a minimum set of efficiency indicators calculated from current information sources. Interventions adopted from the analysis of these indicators could contribute to health services sustainability. We applied the discussion group technique. A total of 23 quality coordinators from around the country and the representatives of the regional quality societies in SECA (Spanish Society for Quality in Healthcare) participated. Ten efficiency indicators useful for integrated management areas were identified and accepted, 5 in the area of primary care and 5 for hospital management. The efficiency indicators agreed upon could contribute to the sustainability of the health system without this affecting the quality of care. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

Cost-effectiveness of reducing sulfur emissions from ships.

PubMed

Wang, Chengfeng; Corbett, James J; Winebrake, James J

2007-12-15

We model cost-effectiveness of control strategies for reducing SO2 emissions from U.S. foreign commerce ships traveling in existing European or hypothetical U.S. West Coast SO(x) Emission Control Areas (SECAs) under international maritime regulations. Variation among marginal costs of control for individual ships choosing between fuel-switching and aftertreatment reveals cost-saving potential of economic incentive instruments. Compared to regulations prescribing low sulfur fuels, a performance-based policy can save up to $260 million for these ships with 80% more emission reductions than required because least-cost options on some individual ships outperform standards. Optimal simulation of a market-based SO2 control policy for approximately 4,700 U.S. foreign commerce ships traveling in the SECAs in 2002 shows that SECA emissions control targets can be achieved by scrubbing exhaust gas of one out of ten ships with annual savings up to $480 million over performance-based policy. A market-based policy could save the fleet approximately $63 million annually under our best-estimate scenario. Spatial evaluation of ship emissions reductions shows that market-based instruments can reduce more SO2 closer to land while being more cost-effective for the fleet. Results suggest that combining performance requirements with market-based instruments can most effectively control SO2 emissions from ships.

GRC-2005-C-01372

NASA Image and Video Library

2001-10-06

WebCore Technologies, Fiber-reinforced Foam Core Composite Sandwich Panel during preparation for testing in the Ballistic Impact Lab. Pictured: Dale Hopkins, GRC and Mike Sheppard, Web Core Technologies Cross reference to camera file number: G6QJ0101

GRC-2005-C-01368

NASA Image and Video Library

2001-10-06

WebCore Technologies, Fiber-reinforced Foam Core Composite Sandwich Panel during preparation for testing in the Ballistic Impact Lab. Pictured: Dale Hopkins, GRC and Mike Sheppard, Web Core Technologies Cross reference to camera file number: G6QJ0086

Mars Technology Rover with Arm-Mounted Percussive Coring Tool, Microimager, and Sample-Handling Encapsulation Containerization Subsystem

NASA Technical Reports Server (NTRS)

Younse, Paulo J.; Dicicco, Matthew A.; Morgan, Albert R.

2012-01-01

A report describes the PLuto (programmable logic) Mars Technology Rover, a mid-sized FIDO (field integrated design and operations) class rover with six fully drivable and steerable cleated wheels, a rocker-bogey suspension, a pan-tilt mast with panorama and navigation stereo camera pairs, forward and rear stereo hazcam pairs, internal avionics with motor drivers and CPU, and a 5-degrees-of-freedom robotic arm. The technology rover was integrated with an arm-mounted percussive coring tool, microimager, and sample handling encapsulation containerization subsystem (SHEC). The turret of the arm contains a percussive coring drill and microimager. The SHEC sample caching system mounted to the rover body contains coring bits, sample tubes, and sample plugs. The coring activities performed in the field provide valuable data on drilling conditions for NASA tasks developing and studying coring technology. Caching of samples using the SHEC system provide insight to NASA tasks investigating techniques to store core samples in the future.

76 FR 6839 - ActiveCore Technologies, Inc., Battery Technologies, Inc., China Media1 Corp., Dura Products...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] ActiveCore Technologies, Inc., Battery Technologies, Inc., China Media1 Corp., Dura Products International, Inc. (n/k/a Dexx Corp.), Global Mainframe... Battery Technologies, Inc. because it has not filed any periodic reports since the period ended December...

The HTA core model: a novel method for producing and reporting health technology assessments.

PubMed

Lampe, Kristian; Mäkelä, Marjukka; Garrido, Marcial Velasco; Anttila, Heidi; Autti-Rämö, Ilona; Hicks, Nicholas J; Hofmann, Björn; Koivisto, Juha; Kunz, Regina; Kärki, Pia; Malmivaara, Antti; Meiesaar, Kersti; Reiman-Möttönen, Päivi; Norderhaug, Inger; Pasternack, Iris; Ruano-Ravina, Alberto; Räsänen, Pirjo; Saalasti-Koskinen, Ulla; Saarni, Samuli I; Walin, Laura; Kristensen, Finn Børlum

2009-12-01

The aim of this study was to develop and test a generic framework to enable international collaboration for producing and sharing results of health technology assessments (HTAs). Ten international teams constructed the HTA Core Model, dividing information contained in a comprehensive HTA into standardized pieces, the assessment elements. Each element contains a generic issue that is translated into practical research questions while performing an assessment. Elements were described in detail in element cards. Two pilot assessments, designated as Core HTAs were also produced. The Model and Core HTAs were both validated. Guidance on the use of the HTA Core Model was compiled into a Handbook. The HTA Core Model considers health technologies through nine domains. Two applications of the Model were developed, one for medical and surgical interventions and another for diagnostic technologies. Two Core HTAs were produced in parallel with developing the model, providing the first real-life testing of the Model and input for further development. The results of formal validation and public feedback were primarily positive. Development needs were also identified and considered. An online Handbook is available. The HTA Core Model is a novel approach to HTA. It enables effective international production and sharing of HTA results in a structured format. The face validity of the Model was confirmed during the project, but further testing and refining are needed to ensure optimal usefulness and user-friendliness. Core HTAs are intended to serve as a basis for local HTA reports. Core HTAs do not contain recommendations on technology use.

Oak Ridge National Laboratory Core Competencies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberto, J.B.; Anderson, T.D.; Berven, B.A.

1994-12-01

A core competency is a distinguishing integration of capabilities which enables an organization to deliver mission results. Core competencies represent the collective learning of an organization and provide the capacity to perform present and future missions. Core competencies are distinguishing characteristics which offer comparative advantage and are difficult to reproduce. They exhibit customer focus, mission relevance, and vertical integration from research through applications. They are demonstrable by metrics such as level of investment, uniqueness of facilities and expertise, and national impact. The Oak Ridge National Laboratory (ORNL) has identified four core competencies which satisfy the above criteria. Each core competencymore » represents an annual investment of at least $100M and is characterized by an integration of Laboratory technical foundations in physical, chemical, and materials sciences; biological, environmental, and social sciences; engineering sciences; and computational sciences and informatics. The ability to integrate broad technical foundations to develop and sustain core competencies in support of national R&D goals is a distinguishing strength of the national laboratories. The ORNL core competencies are: 9 Energy Production and End-Use Technologies o Biological and Environmental Sciences and Technology o Advanced Materials Synthesis, Processing, and Characterization & Neutron-Based Science and Technology. The distinguishing characteristics of each ORNL core competency are described. In addition, written material is provided for two emerging competencies: Manufacturing Technologies and Computational Science and Advanced Computing. Distinguishing institutional competencies in the Development and Operation of National Research Facilities, R&D Integration and Partnerships, Technology Transfer, and Science Education are also described. Finally, financial data for the ORNL core competencies are summarized in the appendices.« less

Integrating Magnetics for On-Chip Power: A Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, CR; Harburg, DV; Qiu, JZ

Integration of efficient power converters requires technology for efficient, high-power on-chip inductors and transformers. Increases in switching frequency, facilitated by advances in circuit designs and silicon or wide-bandgap semiconductors, can enable miniaturization, but only if the magnetics technology works well at the higher frequencies. Technologies, geometries, and scaling of air-core and magnetic-core inductors and transformers are examined, and their potential for integration is discussed. Air-core inductors can use simpler fabrication, and increasing frequency can always be used to decrease their size, but magnetic cores can decrease the required thickness without requiring as high a frequency.

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

EVALUATION OF THE HTA CORE MODEL FOR NATIONAL HEALTH TECHNOLOGY ASSESSMENT REPORTS: COMPARATIVE STUDY AND EXPERIENCES FROM EUROPEAN COUNTRIES.

PubMed

Kõrge, Kristina; Berndt, Nadine; Hohmann, Juergen; Romano, Florence; Hiligsmann, Mickael

2017-01-01

The health technology assessment (HTA) Core Model® is a tool for defining and standardizing the elements of HTA analyses within several domains for producing structured reports. This study explored the parallels between the Core Model and a national HTA report. Experiences from various European HTA agencies were also investigated to determine the Core Model's adaptability to national reports. A comparison between a national report on Genetic Counseling, produced by the Cellule d'expertise médicale Luxembourg, and the Core Model was performed to identify parallels in terms of relevant and comparable assessment elements (AEs). Semi-structured interviews with five representatives from European HTA agencies were performed to assess their user experiences with the Core Model. The comparative study revealed that 50 percent of the total number (n = 144) of AEs in the Core Model were relevant for the national report. Of these 144 AEs from the Core Model, 34 (24 percent) were covered in the national report. Some AEs were covered only partly. The interviewees emphasized flexibility in using the Core Model and stated that the most important aspects to be evaluated include characteristics of the disease and technology, clinical effectiveness, economic aspects, and safety. In the present study, the national report covered an acceptable number of AEs of the Core Model. These results need to be interpreted with caution because only one comparison was performed. The Core Model can be used in a flexible manner, applying only those elements that are relevant from the perspective of the technology assessment and specific country context.

From Context to Core

ERIC Educational Resources Information Center

Campus Technology, 2008

2008-01-01

At Campus Technology 2008, Arizona State University Technology Officer Adrian Sannier mesmerized audiences with his mandate to become more efficient by doing only the "core" tech stuff--and getting someone else to slog through the context. This article presents an excerpt from Sannier's hour-long keynote address at Campus Technology '08. Sannier…

Research on NGN network control technology

NASA Astrophysics Data System (ADS)

Li, WenYao; Zhou, Fang; Wu, JianXue; Li, ZhiGuang

2004-04-01

Nowadays NGN (Next Generation Network) is the hotspot for discussion and research in IT section. The NGN core technology is the network control technology. The key goal of NGN is to realize the network convergence and evolution. Referring to overlay network model core on Softswitch technology, circuit switch network and IP network convergence realized. Referring to the optical transmission network core on ASTN/ASON, service layer (i.e. IP layer) and optical transmission convergence realized. Together with the distributing feature of NGN network control technology, on NGN platform, overview of combining Softswitch and ASTN/ASON control technology, the solution whether IP should be the NGN core carrier platform attracts general attention, and this is also a QoS problem on NGN end to end. This solution produces the significant practical meaning on equipment development, network deployment, network design and optimization, especially on realizing present network smooth evolving to the NGN. This is why this paper puts forward the research topic on the NGN network control technology. This paper introduces basics on NGN network control technology, then proposes NGN network control reference model, at the same time describes a realizable network structure of NGN. Based on above, from the view of function realization, NGN network control technology is discussed and its work mechanism is analyzed.

Materials for low temperature SOFCs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krumpelt, M.; Ralph, J.; Cruse, T.

2002-08-02

Solid oxide fuel cells (SOFCs) are one of the potentially most efficient and clean energy conversion technologies for electric utility applications. Laboratory cells have shown extraordinary durability, and actual utility-scale prototypes have worked very well. The main obstacle to commercialization has been the relatively high manufacturing cost. To reduce these costs, efforts have been underway for several years to adapt manufacturing technology from the semiconductor industry to the SOFCs; however, tape casting, screen printing and similar methods are more applicable to planar configurations than to the more proven tubular ones. In planar cells the bipolar plate and edge seals becomemore » more critical elements, and material selection may have repercussions for the other fuel cell components. Ferritic stainless steel bipolar plates may be a good choice for reducing the cost of the stacks, but ferritic steels oxidize rapidly at temperatures above 800 C. Inexorably, one is led to the conclusion that anodes, cathodes and electrolytes operating below 800 C need to be found. Another motivation for developing planar SOFCs operating at reduced temperature is the prospect of new non-utility applications. The U.S. Department of Energy has initiated the Solid State Energy Conversion Alliance (SECA) program for developing small modular stacks ranging in capacity from 5 to 10 kW{sup (1)}. This size range meets the power requirements of auxiliary power units for heavy and perhaps even light-duty vehicles, and also for remote stationary applications. In terms of electric capacity, the distributed electric utility market may well exceed the potential market for APUs, but the number of units produced could be higher for the latter, yielding cost benefits related to mass production. On the other hand, the fuel for use in transportation or remote stationary applications will consist of gasoline, diesel or propane, which contain higher sulfur levels than natural gas. Anodes with some resistance to sulfur poisoning would be desirable. Also, during the more frequent shutdowns and startups in these applications, the anodes may get exposed to air. Typical nickel-based SOFC anodes may not tolerate air exposure very well and may need to be modified. Argonne National Laboratory is engaged in developing new materials options for SECA applications, as discussed here.« less

KSI's Cross Insulated Core Transformer Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uhmeyer, Uwe

2009-08-04

Cross Insulated Core Transformer (CCT) technology improves on Insulated Core Transformer (ICT) implementations. ICT systems are widely used in very high voltage, high power, power supply systems. In an ICT transformer ferrite core sections are insulated from their neighboring ferrite cores. Flux leakage is present at each of these insulated gaps. The flux loss is raised to the power of stages in the ICT design causing output voltage efficiency to taper off with increasing stages. KSI's CCT technology utilizes a patented technique to compensate the flux loss at each stage of an ICT system. Design equations to calculate the fluxmore » compensation capacitor value are presented. CCT provides corona free operation of the HV stack. KSI's CCT based High Voltage power supply systems offer high efficiency operation, high frequency switching, low stored energy and smaller size over comparable ICT systems.« less

Large core plastic planar optical splitter fabricated by 3D printing technology

NASA Astrophysics Data System (ADS)

Prajzler, Václav; Kulha, Pavel; Knietel, Marian; Enser, Herbert

2017-10-01

We report on the design, fabrication and optical properties of large core multimode optical polymer splitter fabricated using fill up core polymer in substrate that was made by 3D printing technology. The splitter was designed by the beam propagation method intended for assembling large core waveguide fibers with 735 μm diameter. Waveguide core layers were made of optically clear liquid adhesive, and Veroclear polymer was used as substrate and cover layers. Measurement of optical losses proved that the insertion optical loss was lower than 6.8 dB in the visible spectrum.

Using Multi-Core Systems for Rover Autonomy

NASA Technical Reports Server (NTRS)

Clement, Brad; Estlin, Tara; Bornstein, Benjamin; Springer, Paul; Anderson, Robert C.

2010-01-01

Task Objectives are: (1) Develop and demonstrate key capabilities for rover long-range science operations using multi-core computing, (a) Adapt three rover technologies to execute on SOA multi-core processor (b) Illustrate performance improvements achieved (c) Demonstrate adapted capabilities with rover hardware, (2) Targeting three high-level autonomy technologies (a) Two for onboard data analysis (b) One for onboard command sequencing/planning, (3) Technologies identified as enabling for future missions, (4)Benefits will be measured along several metrics: (a) Execution time / Power requirements (b) Number of data products processed per unit time (c) Solution quality

Transposon-disruption of a maize nuclear gene, tha1, encoding a chloroplast SecA homologue: in vivo role of cp-SecA in thylakoid protein targeting.

PubMed

Voelker, R; Mendel-Hartvig, J; Barkan, A

1997-02-01

A nuclear mutant of maize, tha1, which exhibited defects in the translocation of proteins across the thylakoid membrane, was described previously. A transposon insertion at the tha1 locus facilitated the cloning of portions of the tha1 gene. Strong sequence similarity with secA genes from bacteria, pea and spinach indicates that tha1 encodes a SecA homologue (cp-SecA). The tha1-ref allele is either null or nearly so, in that tha1 mRNA is undetectable in mutant leaves and cp-SecA accumulation is reduced > or = 40-fold. These results, in conjunction with the mutant phenotype described previously, demonstrate that cp-SecA functions in vivo to facilitate the translocation of OEC33, PSI-F and plastocyanin but does not function in the translocation of OEC23 and OEC16. Our results confirm predictions for cp-SecA function made from the results of in vitro experiments and establish several new functions for cp-SecA, including roles in the targeting of a chloroplast-encoded protein, cytochrome f, and in protein targeting in the etioplast, a nonphotosynthetic plastid type. Our finding that the accumulation of properly targeted plastocyanin and cytochrome f in tha1-ref thylakoid membranes is reduced only a few-fold despite the near or complete absence of cp-SecA suggests that cp-SecA facilitates but is not essential in vivo for their translocation across the membrane.

Application of Advanced Multi-Core Processor Technologies to Oceanographic Research

DTIC Science & Technology

2013-09-30

STM32 NXP LPC series No Proprietary Microchip PIC32/DSPIC No > 500 mW; < 5 W ARM Cortex TI OMAP TI Sitara Broadcom BCM2835 Varies FPGA...1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Application of Advanced Multi-Core Processor Technologies...state-of-the-art information processing architectures. OBJECTIVES Next-generation processor architectures (multi-core, multi-threaded) hold the

Integrating Google Apps and Google Chromebooks into the Core Curriculum: A Phenomenological Study of the Lived Experience of Public School Teachers

ERIC Educational Resources Information Center

Bartolo, Paula

2017-01-01

The purpose of this phenomenological study was to understand the lived experiences of public school teachers using Google Suite for Education with Google Chromebooks integrated into the core curriculum. With the adoption of Common Core standards by 46 states, the increased use of technology has occurred due to standards that integrate technology.…

Empirical seasonal forecasts of the NAO

NASA Astrophysics Data System (ADS)

Sanchezgomez, E.; Ortizbevia, M.

2003-04-01

We present here seasonal forecasts of the North Atlantic Oscillation (NAO) issued from ocean predictors with an empirical procedure. The Singular Values Decomposition (SVD) of the cross-correlation matrix between predictor and predictand fields at the lag used for the forecast lead is at the core of the empirical model. The main predictor field are sea surface temperature anomalies, although sea ice cover anomalies are also used. Forecasts are issued in probabilistic form. The model is an improvement over a previous version (1), where Sea Level Pressure Anomalies were first forecast, and the NAO Index built from this forecast field. Both correlation skill between forecast and observed field, and number of forecasts that hit the correct NAO sign, are used to assess the forecast performance , usually above those values found in the case of forecasts issued assuming persistence. For certain seasons and/or leads, values of the skill are above the .7 usefulness treshold. References (1) SanchezGomez, E. and Ortiz Bevia M., 2002, Estimacion de la evolucion pluviometrica de la Espana Seca atendiendo a diversos pronosticos empiricos de la NAO, in 'El Agua y el Clima', Publicaciones de la AEC, Serie A, N 3, pp 63-73, Palma de Mallorca, Spain

Spacewire Routers Implemented with FPGA Technology

NASA Astrophysics Data System (ADS)

Habinc, Sandi; Isomaki, Marko

2011-08-01

Routers are an integral part of SpaceWire networks. Aeroflex Gaisler has developed a highly configurable SpaceWire router VHDL IP core to meet the needs for technology independent router designs. The main design goals have been configurability, technology independence, support of the standard and expandability. The IP core being technologically independent allows it to be used in both ASIC and FPGA technology. The latter is now being used to produce versatile standard products that can reach the market faster than for example an ASIC based product.

The subsurface geology of Río Tinto: material examined during a simulated Mars drilling mission for the Mars Astrobiology Research and Technology Experiment (MARTE).

PubMed

Prieto-Ballesteros, Olga; Martínez-Frías, Jesús; Schutt, John; Sutter, Brad; Heldmann, Jennifer L; Bell, Mary Sue; Battler, Melissa; Cannon, Howard; Gómez-Elvira, Javier; Stoker, Carol R

2008-10-01

The 2005 Mars Astrobiology Research and Technology Experiment (MARTE) project conducted a simulated 1-month Mars drilling mission in the Río Tinto district, Spain. Dry robotic drilling, core sampling, and biological and geological analytical technologies were collectively tested for the first time for potential use on Mars. Drilling and subsurface sampling and analytical technologies are being explored for Mars because the subsurface is the most likely place to find life on Mars. The objectives of this work are to describe drilling, sampling, and analytical procedures; present the geological analysis of core and borehole material; and examine lessons learned from the drilling simulation. Drilling occurred at an undisclosed location, causing the science team to rely only on mission data for geological and biological interpretations. Core and borehole imaging was used for micromorphological analysis of rock, targeting rock for biological analysis, and making decisions regarding the next day's drilling operations. Drilling reached 606 cm depth into poorly consolidated gossan that allowed only 35% of core recovery and contributed to borehole wall failure during drilling. Core material containing any indication of biology was sampled and analyzed in more detail for its confirmation. Despite the poorly consolidated nature of the subsurface gossan, dry drilling was able to retrieve useful core material for geological and biological analysis. Lessons learned from this drilling simulation can guide the development of dry drilling and subsurface geological and biological analytical technologies for future Mars drilling missions.

The Subsurface Geology of Río Tinto: Material Examined During a Simulated Mars Drilling Mission for the Mars Astrobiology Research and Technology Experiment (MARTE)

NASA Astrophysics Data System (ADS)

Prieto-Ballesteros, Olga; Martínez-Frías, Jesús; Schutt, John; Sutter, Brad; Heldmann, Jennifer L.; Bell Johnson, Mary Sue; Battler, Melissa; Cannon, Howard; Gómez-Elvira, Javier; Stoker, Carol R.

2008-10-01

The 2005 Mars Astrobiology Research and Technology Experiment (MARTE) project conducted a simulated 1-month Mars drilling mission in the Río Tinto district, Spain. Dry robotic drilling, core sampling, and biological and geological analytical technologies were collectively tested for the first time for potential use on Mars. Drilling and subsurface sampling and analytical technologies are being explored for Mars because the subsurface is the most likely place to find life on Mars. The objectives of this work are to describe drilling, sampling, and analytical procedures; present the geological analysis of core and borehole material; and examine lessons learned from the drilling simulation. Drilling occurred at an undis closed location, causing the science team to rely only on mission data for geological and biological interpretations. Core and borehole imaging was used for micromorphological analysis of rock, targeting rock for biological analysis, and making decisions regarding the next day's drilling operations. Drilling reached 606 cm depth into poorly consolidated gossan that allowed only 35% of core recovery and contributed to borehole wall failure during drilling. Core material containing any indication of biology was sampled and analyzed in more detail for its confirmation. Despite the poorly consolidated nature of the subsurface gossan, dry drilling was able to retrieve useful core material for geological and biological analysis. Lessons learned from this drilling simulation can guide the development of dry drilling and subsurface geological and biological analytical technologies for future Mars drilling missions.

Engineering research, development and technology report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langland, R T

1999-02-01

Nineteen ninety-eight has been a transition year for Engineering, as we have moved from our traditional focus on thrust areas to a more focused approach with research centers. These five new centers of excellence collectively comprise Engineering's Science and Technology program. This publication summarizes our formative year under this new structure. Let me start by talking about the differences between a thrust area and a research center. The thrust area is more informal, combining an important technology with programmatic priorities. In contrast, a research center is directly linked to an Engineering core technology. It is the purer model, for itmore » is more enduring yet has the scope to be able to adapt quickly to evolving programmatic priorities. To put it another way, the mission of a thrust area was often to grow the programs in conjunction with a technology, whereas the task of a research center is to vigorously grow our core technologies. By cultivating each core technology, we in turn enable long-term growth of new programs.« less

Why simulation can be efficient: on the preconditions of efficient learning in complex technology based practices.

PubMed

Hofmann, Bjørn

2009-07-23

It is important to demonstrate learning outcomes of simulation in technology based practices, such as in advanced health care. Although many studies show skills improvement and self-reported change to practice, there are few studies demonstrating patient outcome and societal efficiency. The objective of the study is to investigate if and why simulation can be effective and efficient in a hi-tech health care setting. This is important in order to decide whether and how to design simulation scenarios and outcome studies. Core theoretical insights in Science and Technology Studies (STS) are applied to analyze the field of simulation in hi-tech health care education. In particular, a process-oriented framework where technology is characterized by its devices, methods and its organizational setting is applied. The analysis shows how advanced simulation can address core characteristics of technology beyond the knowledge of technology's functions. Simulation's ability to address skilful device handling as well as purposive aspects of technology provides a potential for effective and efficient learning. However, as technology is also constituted by organizational aspects, such as technology status, disease status, and resource constraints, the success of simulation depends on whether these aspects can be integrated in the simulation setting as well. This represents a challenge for future development of simulation and for demonstrating its effectiveness and efficiency. Assessing the outcome of simulation in education in hi-tech health care settings is worthwhile if core characteristics of medical technology are addressed. This challenges the traditional technical versus non-technical divide in simulation, as organizational aspects appear to be part of technology's core characteristics.

Information Orientation, Information Technology Governance, and Information Technology Service Management: A Multi-Level Approach for Teaching the MBA Core Information Systems Course

ERIC Educational Resources Information Center

Beachboard, John; Aytes, Kregg

2011-01-01

Core MBA IT courses have tended to be survey courses that cover important topics but often do not sufficiently engage students. The result is that many top-ranked MBA programs have not found such courses useful enough to include in their core MBA requirements. In this paper, we present a design of an MBA course emphasizing information technology…

65nm RadSafe™ Technology for RC64 and Advanced SOCs

NASA Astrophysics Data System (ADS)

Liran, Tuvia; Ginosar, Ran; Lange, Fredy; Mandler, Alberto; Aviely, Peleg; Meirov, Henri; Goldberg, Michael; Meister, Zeev; Oliel, Mickey

2015-09-01

The trend of scaling of microelectronic provides certain advantages for space components, as well as some challenges. It enables implementing highly integrated and high performance ASICs, reducing power, area and weight. Scaling also improves the immunity to TID and SEL in most cases, but increases soft error rate significantly. Ramon Chips adopted the 65nm technology for implementing RC64 [1,2], a 64 core DSP for space applications, and for making other future products. The 65nm process node is widely used, very mature, and supported by wide range of IP providers. Thus the need for full custom design of cores and IPs is minimized, and radiation hardening is achievable by mitigating the radiation effects on the available IPs, and developing proprietary IPs only for complementing the available IPs. The RadSafe_65TM technology includes hardened standard cells and I/O libraries, methods for mitigation of radiation effects in COTS IP cores (SRAM, PLL, SERDES, DDR2/3 interface) and adding unique cores for monitoring radiation effects and junction temperature. We had developed RADIC6, a technology development vehicle, for verification of all hard cores and verification of the methodologies and design flow required for RC64. RADIC6 includes the test structures for characterizing the IP cores for immunity to all radiation effects. This paper describes the main elements and IP cores of RadSafe_65TM, as well as the contents of RADIC6 test chip.

Developing a Consensus-Driven, Core Competency Model to Shape Future Audio Engineering Technology Curriculum: A Web-Based Modified Delphi Study

ERIC Educational Resources Information Center

Tough, David T.

2009-01-01

The purpose of this online study was to create a ranking of essential core competencies and technologies required by AET (audio engineering technology) programs 10 years in the future. The study was designed to facilitate curriculum development and improvement in the rapidly expanding number of small to medium sized audio engineering technology…

Promoting pedagogical content knowledge development for early career secondary teachers in science and technology using content representations

NASA Astrophysics Data System (ADS)

Williams, John; Eames, Chris; Hume, Anne; Lockley, John

2012-11-01

Background: This research addressed the key area of early career teacher education and aimed to explore the use of a 'content representation' (CoRe) as a mediational tool to develop early career secondary teacher pedagogical content knowledge (PCK). This study was situated in the subject areas of science and technology, where sound teacher knowledge is particularly important to student engagement. Purpose: The study was designed to examine whether such a tool (a CoRe), co-designed by an early career secondary teacher with expert content and pedagogy specialists, can enhance the PCK of early career teachers. The research questions were: How can experts in content and pedagogy work together with early career teachers to develop one science topic CoRe and one technology topic CoRe to support the development of PCK for early career secondary teachers? How does the use of a collaboratively designed CoRe affect the planning of an early career secondary teacher in science or technology? How has engagement in the development and use of an expert-informed CoRe developed an early career teacher's PCK? Sample: The research design incorporated a unique partnership between two expert classroom teachers, two content experts, four early career teachers, and four researchers experienced in science and technology education. Design: This study employed an interpretivist-based methodology and an action research approach within a four-case study design. Data were gathered using qualitative research methods focused on semi-structured interviews, observations and document analysis. Results: The study indicated that CoRes, developed through this collaborative process, helped the early career teachers focus on the big picture of the topic, emphasize particularly relevant areas of content and consider alternative ways of planning for their teaching. Conclusions: This paper presents an analysis of the process of CoRe development by the teacher-expert partnerships and the effect that had on the early career teachers' PCK. In addition, as the same tools and methodology were applied to both a science and a technology teaching context, differences between the two learning areas are discussed.

Reconfigurable Hardware Adapts to Changing Mission Demands

NASA Technical Reports Server (NTRS)

2003-01-01

A new class of computing architectures and processing systems, which use reconfigurable hardware, is creating a revolutionary approach to implementing future spacecraft systems. With the increasing complexity of electronic components, engineers must design next-generation spacecraft systems with new technologies in both hardware and software. Derivation Systems, Inc., of Carlsbad, California, has been working through NASA s Small Business Innovation Research (SBIR) program to develop key technologies in reconfigurable computing and Intellectual Property (IP) soft cores. Founded in 1993, Derivation Systems has received several SBIR contracts from NASA s Langley Research Center and the U.S. Department of Defense Air Force Research Laboratories in support of its mission to develop hardware and software for high-assurance systems. Through these contracts, Derivation Systems began developing leading-edge technology in formal verification, embedded Java, and reconfigurable computing for its PF3100, Derivational Reasoning System (DRS ), FormalCORE IP, FormalCORE PCI/32, FormalCORE DES, and LavaCORE Configurable Java Processor, which are designed for greater flexibility and security on all space missions.

Living technology: exploiting life's principles in technology.

PubMed

Bedau, Mark A; McCaskill, John S; Packard, Norman H; Rasmussen, Steen

2010-01-01

The concept of living technology-that is, technology that is based on the powerful core features of life-is explained and illustrated with examples from artificial life software, reconfigurable and evolvable hardware, autonomously self-reproducing robots, chemical protocells, and hybrid electronic-chemical systems. We define primary (secondary) living technology according as key material components and core systems are not (are) derived from living organisms. Primary living technology is currently emerging, distinctive, and potentially powerful, motivating this review. We trace living technology's connections with artificial life (soft, hard, and wet), synthetic biology (top-down and bottom-up), and the convergence of nano-, bio-, information, and cognitive (NBIC) technologies. We end with a brief look at the social and ethical questions generated by the prospect of living technology.

Primary processing of CRISPR RNA by the endonuclease Cas6 in Staphylococcus epidermidis.

PubMed

Wakefield, Noelle; Rajan, Rakhi; Sontheimer, Erik J

2015-10-07

In many bacteria and archaea, an adaptive immune system (CRISPR-Cas) provides immunity against foreign genetic elements. This system uses CRISPR RNAs (crRNAs) derived from the CRISPR array, along with CRISPR-associated (Cas) proteins, to target foreign nucleic acids. In most CRISPR systems, endonucleolytic processing of crRNA precursors (pre-crRNAs) is essential for the pathway. Here we study the Cas6 endonuclease responsible for crRNA processing in the Type III-A CRISPR-Cas system from Staphylococcus epidermidis RP62a, a model for Type III-A CRISPR-Cas systems, and define substrate requirements for SeCas6 activity. We find that SeCas6 is necessary and sufficient for full-length crRNA biogenesis in vitro, and that it relies on both sequence and stem-loop structure in the 3' half of the CRISPR repeat for recognition and processing. Copyright © 2015 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Energy Efficient Engine integrated core/low spool design and performance report

NASA Technical Reports Server (NTRS)

Stearns, E. Marshall

1985-01-01

The Energy Efficient Engine (E3) is a NASA program to create fuel saving technology for future transport aircraft engines. The E3 technology advancements were demonstrated to operate reliably and achieve goal performance in tests of the Integrated Core/Low Spool vehicle. The first build of this undeveloped technology research engine set a record for low fuel consumption. Its design and detailed test results are herein presented.

[Lean logistics management in healthcare: a case study].

PubMed

Aguilar-Escobar, V G; Garrido-Vega, P

2013-01-01

To study the applicability of the principles of Lean Production to manage the supply chain of a hospital. In particular, to determine which Lean practices and principles are applicable, the benefits obtained and the main barriers for its implementation. Managing the hospital supply chain is an important issue, both for its effect on the quality of care and its impact on costs. This study is based on a case study. 2005-10. Hospital Virgen Macarena in Seville. Process of implementing a comprehensive logistics management plan based on Lean principles and technological investments. The implementation of the comprehensive plan has reduced inventory, decreased lead times and improved service quality. Also, there have been other important improvements: enhanced employee satisfaction and increased staff productivity, both dedicated to health and the logistics. The experience analysed has shown the applicability and appropriateness of Lean principles and some of its techniques in managing the logistics of hospitals. It also identifies some of the main difficulties that may arise. Copyright © 2011 SECA. Published by Elsevier Espana. All rights reserved.

Team Teaching with Academic Core Curricula Teachers: Using Aviation Concepts

ERIC Educational Resources Information Center

Berentsen, Lowell W.

2006-01-01

Technology education teachers today have at their disposal the skills, opportunity, experience, ingenuity, expertise, equipment, and environment to greatly improve students' ability to learn and apply the knowledge they have gained in their academic programs. When a technology education teacher joins forces with an academic core teacher, the…

Delivering Core Engineering Concepts to Secondary Level Students

ERIC Educational Resources Information Center

Merrill, Chris; Custer, Rodney L.; Daugherty, Jenny; Westrick, Martin; Zeng, Yong

2008-01-01

Through the efforts of National Center for Engineering and Technology Education (NCETE), three core engineering concepts within the realm of engineering design have emerged as crucial areas of need within secondary level technology education. These concepts are constraints, optimization, and predictive analysis (COPA). COPA appears to be at the…

Energy Efficient Engine core design and performance report

NASA Technical Reports Server (NTRS)

Stearns, E. Marshall

1982-01-01

The Energy Efficient Engine (E3) is a NASA program to develop fuel saving technology for future large transport aircraft engines. Testing of the General Electric E3 core showed that the core component performance and core system performance necessary to meet the program goals can be achieved. The E3 core design and test results are described.

Study on a New Combination Method and High Efficiency Outer Rotor Type Permanent Magnet Motors

NASA Astrophysics Data System (ADS)

Enomoto, Yuji; Kitamura, Masashi; Motegi, Yasuaki; Andoh, Takashi; Ochiai, Makoto; Abukawa, Toshimi

The segment stator core, high space factor coil, and high efficiency magnet are indispensable technologies in the development of compact and a high efficiency motors. But adoption of the segment stator core and high space factor coil has not progressed in the field of outer rotor type motors, for the reason that the inner components cannot be laser welded together. Therefore, we have examined a segment stator core combination technology for the purposes of getting a large increase in efficiency and realizing miniaturization. We have also developed a characteristic estimation method which provides the most suitable performance for segment stator core motors.

Pacific Northwest National Laboratory institutional plan: FY 1996--2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-01-01

This report contains the operation and direction plan for the Pacific Northwest National Laboratory of the US Department of Energy. The topics of the plan include the laboratory mission and core competencies, the laboratory strategic plan; the laboratory initiatives in molecular sciences, microbial biotechnology, global environmental change, complex modeling of physical systems, advanced processing technology, energy technology development, and medical technologies and systems; core business areas, critical success factors, and resource projections.

The snake geothermal drilling project. Innovative approaches to geothermal exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shervais, John W.; Evans, James P.; Liberty, Lee M.

2014-02-21

The goal of our project was to test innovative technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correlate lithologies observed in core with surface based geophysical studies. Compiled data included geologic maps, volcanic vent distribution, structural maps, existing well logs and temperature gradient logs, groundwater temperatures, and geophysical surveys (resistivity, magnetics, gravity). New data included high-resolution gravity and magnetic surveys, high-resolution seismic surveys, three slimhole test wells, borehole wireline logs, lithology logs, water chemistry, alteration mineralogy, fracture distribution,more » and new thermal gradient measurements.« less

Fast data reconstructed method of Fourier transform imaging spectrometer based on multi-core CPU

NASA Astrophysics Data System (ADS)

Yu, Chunchao; Du, Debiao; Xia, Zongze; Song, Li; Zheng, Weijian; Yan, Min; Lei, Zhenggang

2017-10-01

Imaging spectrometer can gain two-dimensional space image and one-dimensional spectrum at the same time, which shows high utility in color and spectral measurements, the true color image synthesis, military reconnaissance and so on. In order to realize the fast reconstructed processing of the Fourier transform imaging spectrometer data, the paper designed the optimization reconstructed algorithm with OpenMP parallel calculating technology, which was further used for the optimization process for the HyperSpectral Imager of `HJ-1' Chinese satellite. The results show that the method based on multi-core parallel computing technology can control the multi-core CPU hardware resources competently and significantly enhance the calculation of the spectrum reconstruction processing efficiency. If the technology is applied to more cores workstation in parallel computing, it will be possible to complete Fourier transform imaging spectrometer real-time data processing with a single computer.

76 FR 19467 - Mueller Steam Specialty Formerly Known As Core Industries Including Workers Whose Unemployment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-07

... Formerly Known As Core Industries Including Workers Whose Unemployment Insurance (UI) Wages are Reported... names Core Industries and Watts Regulator, Watts Water Technologies. Accordingly, the Department is... known as Core Industries, including workers whose unemployment Insurance (UI) wages are reported through...

Cloud-Based Collaborative Writing and the Common Core Standards

ERIC Educational Resources Information Center

Yim, Soobin; Warschauer, Mark; Zheng, Binbin; Lawrence, Joshua F.

2014-01-01

The Common Core State Standards emphasize the integration of technology skills into English Language Arts (ELA) instruction, recognizing the demand for technology-based literacy skills to be college- and career- ready. This study aims to examine how collaborative cloud-based writing is used in in a Colorado school district, where one-to-one…

Apps-olutely Perfect! Apps to Support Common Core in the History/Social Studies Classroom

ERIC Educational Resources Information Center

Waters, Stewart; Kenna, Joshua; Bruce, Darrian

2016-01-01

The inclusion of technology in the classroom is an increasingly important feature of effective instruction. The implementation of Common Core Standards in many states also requires teachers to consider new pedagogical strategies to support meaningful learning. This article explores the intersection between technology demands and curricular change…

Transforming the Core Business of Teaching and Learning in Classrooms through ICT

ERIC Educational Resources Information Center

Chandra, Vinesh; Mills, Kathy A.

2015-01-01

Information and Communication Technology (ICT) has become an integral part of societies across the globe. This study demonstrates how successful technology integration by 10 experienced teachers in an Australian high school was dependent on teacher-driven change and innovation that influenced the core business of teaching and learning. The…

Decision-Oriented Health Technology Assessment: One Step Forward in Supporting the Decision-Making Process in Hospitals.

PubMed

Ritrovato, Matteo; Faggiano, Francesco C; Tedesco, Giorgia; Derrico, Pietro

2015-06-01

This article outlines the Decision-Oriented Health Technology Assessment: a new implementation of the European network for Health Technology Assessment Core Model, integrating the multicriteria decision-making analysis by using the analytic hierarchy process to introduce a standardized methodological approach as a valued and shared tool to support health care decision making within a hospital. Following the Core Model as guidance (European network for Health Technology Assessment. HTA core model for medical and surgical interventions. Available from: http://www.eunethta.eu/outputs/hta-core-model-medical-and-surgical-interventions-10r. [Accessed May 27, 2014]), it is possible to apply the analytic hierarchy process to break down a problem into its constituent parts and identify priorities (i.e., assigning a weight to each part) in a hierarchical structure. Thus, it quantitatively compares the importance of multiple criteria in assessing health technologies and how the alternative technologies perform in satisfying these criteria. The verbal ratings are translated into a quantitative form by using the Saaty scale (Saaty TL. Decision making with the analytic hierarchy process. Int J Serv Sci 2008;1:83-98). An eigenvectors analysis is used for deriving the weights' systems (i.e., local and global weights' system) that reflect the importance assigned to the criteria and the priorities related to the performance of the alternative technologies. Compared with the Core Model, this methodological approach supplies a more timely as well as contextualized evidence for a specific technology, making it possible to obtain data that are more relevant and easier to interpret, and therefore more useful for decision makers to make investment choices with greater awareness. We reached the conclusion that although there may be scope for improvement, this implementation is a step forward toward the goal of building a "solid bridge" between the scientific evidence and the final decision maker's choice. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Cores Of Recurrent Events (CORE) | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

CORE is a statistically supported computational method for finding recurrently targeted regions in massive collections of genomic intervals, such as those arising from DNA copy number analysis of single tumor cells or bulk tumor tissues.

Late Cretaceous to Cenozoic deformation and exhumation of the Chilean Frontal Cordillera (28°-29°S), Central Andes

NASA Astrophysics Data System (ADS)

Martínez, Fernando; Parra, Mauricio; Arriagada, César; Mora, Andrés; Bascuñan, Sebastián; Peña, Matías

2017-11-01

The Frontal Cordillera in northern Chile is located over the flat-slab subduction segment of the Central Andes. This tectonic province is characterized by a thick-skinned structural style showing evidence of tectonic inversion and basement-involved compressive structures. Field data, U-Pb geochronological and apatite fission track data were used to unravel partially the tectonic history of the area. Previous U-Pb ages of synorogenic deposits exposed on the flanks of basement-core anticlines indicate that Andean deformation started probably during Late Cretaceous with the tectonic inversion of Triassic and Jurassic half-grabens. New U-Pb ages of the synorogenic Quebrada Seca Formation suggest that this deformation continued during Paleocene (66-60 Ma) with the reverse faulting of pre-rift basement blocks. The analysis of new apatite fission-track data shows that a rapid and coeval cooling related to exhumation of the pre-rift basement blocks occurred during Eocene times. This exhumation event is interpreted for first time in the Chilean Frontal Cordillera and it could have occurred simultaneously with the propagation of basement-involved structures. The age of this exhumation event coincides with the Incaic orogenic phase, which is interpreted as the most important to the Central Andes in terms of shortening, uplift and exhumation.

Evidence-based use of electronic clinical tracking systems in advanced practice registered nurse education: an integrative review.

PubMed

Branstetter, M Laurie; Smith, Lynette S; Brooks, Andrea F

2014-07-01

Over the past decade, the federal government has mandated healthcare providers to incorporate electronic health records into practice by 2015. This technological update in healthcare documentation has generated a need for advanced practice RN programs to incorporate information technology into education. The National Organization of Nurse Practitioner Faculties created core competencies to guide program standards for advanced practice RN education. One core competency is Technology and Information Literacy. Educational programs are moving toward the utilization of electronic clinical tracking systems to capture students' clinical encounter data. The purpose of this integrative review was to evaluate current research on advanced practice RN students' documentation of clinical encounters utilizing electronic clinical tracking systems to meet advanced practice RN curriculum outcome goals in information technology as defined by the National Organization of Nurse Practitioner Faculties. The state of the science depicts student' and faculty attitudes, preferences, opinions, and data collections of students' clinical encounters. Although electronic clinical tracking systems were utilized to track students' clinical encounters, these systems have not been evaluated for meeting information technology core competency standards. Educational programs are utilizing electronic clinical tracking systems with limited evidence-based literature evaluating the ability of these systems to meet the core competencies in advanced practice RN programs.

Elementary Core Curriculum Standards: Levels K-3: Arts, Information Technology, Science, Language Arts, Mathematics, Social Studies, Health, Lifestyles.

ERIC Educational Resources Information Center

Utah State Office of Education, Salt Lake City.

Utah's 1987 minimum course description standards for students in kindergarten through third grade are provided in the required core curriculum areas of arts, information technology, science, language arts, mathematics, social studies, and healthy lifestyles. For each curricular area a rationale is given, followed by a brief course description…

Wild monkeys flake stone tools.

PubMed

Proffitt, Tomos; Luncz, Lydia V; Falótico, Tiago; Ottoni, Eduardo B; de la Torre, Ignacio; Haslam, Michael

2016-11-03

Our understanding of the emergence of technology shapes how we view the origins of humanity. Sharp-edged stone flakes, struck from larger cores, are the primary evidence for the earliest stone technology. Here we show that wild bearded capuchin monkeys (Sapajus libidinosus) in Brazil deliberately break stones, unintentionally producing recurrent, conchoidally fractured, sharp-edged flakes and cores that have the characteristics and morphology of intentionally produced hominin tools. The production of archaeologically visible cores and flakes is therefore no longer unique to the human lineage, providing a comparative perspective on the emergence of lithic technology. This discovery adds an additional dimension to interpretations of the human Palaeolithic record, the possible function of early stone tools, and the cognitive requirements for the emergence of stone flaking.

Overview of NASA's In Space Robotic Servicing

NASA Technical Reports Server (NTRS)

Reed, Benjamin B.

2015-01-01

The panel discussion will start with a presentation of the work of the Satellite Servicing Capabilities Office (SSCO), a team responsible for the overall management, coordination, and implementation of satellite servicing technologies and capabilities for NASA. Born from the team that executed the five Hubble servicing missions, SSCO is now maturing a core set of technologies that support both servicing goals and NASA's exploration and science objectives, including: autonomous rendezvous and docking systems; dexterous robotics; high-speed, fault-tolerant computing; advanced robotic tools, and propellant transfer systems. SSCOs proposed Restore-L mission, under development since 2009, is rapidly advancing the core capabilities the fledgling satellite-servicing industry needs to jumpstart a new national industry. Restore-L is also providing key technologies and core expertise to the Asteroid Redirect Robotic Mission (ARRM), with SSCO serving as the capture module lead for the ARRM effort. Reed will present a brief overview of SSCOs history, capabilities and technologies.

Professional Development for Promoting 21st Century Skills and Common Core State Standards in Foreign Language and Social Studies Classrooms

ERIC Educational Resources Information Center

Beriswill, Joanne Elizabeth; Bracey, Pamela Scott; Sherman-Morris, Kathleen; Huang, Kun; Lee, Sang Joon

2016-01-01

To help satisfy the pressing need for technology-related professional development for in-service teachers, the Global Academic Essentials Teacher Institute (GAETI) was implemented to provide in-service foreign language and social studies teachers with content, pedagogy, and technology explorations centered on the teaching of the Common Core State…

Pearson-Praxis Assessments Review Teacher Certification Assessment Technology Education: A Report for the Council on Technology and Engineering Teacher Education

ERIC Educational Resources Information Center

Mahoney, Mark P.

2015-01-01

The Praxis Series, developed by Educational Testing Services (ETS), has been the long standing assessment for teacher licensure. It is comprised of three separate skills examinations: (1) Praxis Core Academic Skills for Educators (Core) (attempts to measure academic skills in reading, writing, and mathematics; content knowledge of candidates…

Evaluation of fire recurrence effect on genetic diversity in maritime pine (Pinus pinaster Ait.) stands using Inter-Simple Sequence Repeat profiles.

PubMed

Lucas-Borja, M E; Ahrazem, O; Candel-Pérez, D; Moya, D; Fonseca, T; Hernández Tecles, E; De Las Heras, J; Gómez-Gómez, L

2016-12-01

The management of maritime pine in fire-prone habitats is a challenging task and fine-scale population genetic analyses are necessary to check if different fire recurrences affect genetic variability. The objective of this study was to assess the effect of fire recurrence on maritime pine genetic diversity using inter-simple sequence repeat markers (ISSR). Three maritime pine (Pinus pinaster Ait.) populations from Northern Portugal were chosen to characterize the genetic variability among populations. In relation to fire recurrence, Seirós population was affected by fire both in 1990 and 2005 whereas Vila Seca-2 population was affected by fire just in 2005. The Vila Seca-1 population has been never affected by fire. Our results showed the highest Nei's genetic diversity (He=0.320), Shannon information index (I=0.474) and polymorphic loci (PPL=87.79%) among samples from twice burned populations (Seirós site). Thus, fire regime plays an important role affecting genetic diversity in the short-term, although not generating maritime pine genetic erosion. Copyright © 2016 Elsevier B.V. All rights reserved.

The evolution processes of DNA sequences, languages and carols

NASA Astrophysics Data System (ADS)

Hauck, Jürgen; Henkel, Dorothea; Mika, Klaus

2001-04-01

The sequences of bases A, T, C and G of about 100 enolase, secA and cytochrome DNA were analyzed for attractive or repulsive interactions by the numbers T 1,T 2,T 3; r of nearest, next-nearest and third neighbor bases of the same kind and the concentration r=other bases/analyzed base. The area of possible T1, T2 values is limited by the linear borders T 2=2T 1-2, T 2=0 or T1=0 for clustering, attractive or repulsive interactions and the border T2=-2 T1+2(2- r) for a variation from repulsive to attractive interactions at r⩽2. Clustering is preferred by most bases in sequences of enolases and secA’ s. Major deviations with repulsive interactions of some bases are observed for archaea bacteria in secA and for highly developed animals and the human species in enolase sequences. The borders of the structure map for enthalpy stabilized structures with maximum interactions are approached in few cases. Most letters of the natural languages and some music notes are at the borders of the structure map.

Preprotein mature domains contain translocase targeting signals that are essential for secretion.

PubMed

Chatzi, Katerina E; Sardis, Marios Frantzeskos; Tsirigotaki, Alexandra; Koukaki, Marina; Šoštarić, Nikolina; Konijnenberg, Albert; Sobott, Frank; Kalodimos, Charalampos G; Karamanou, Spyridoula; Economou, Anastassios

2017-05-01

Secretory proteins are only temporary cytoplasmic residents. They are typically synthesized as pre proteins, carrying signal peptides N-terminally fused to their mature domains. In bacteria secretion largely occurs posttranslationally through the membrane-embedded SecA-SecYEG translocase. Upon crossing the plasma membrane, signal peptides are cleaved off and mature domains reach their destinations and fold. Targeting to the translocase is mediated by signal peptides. The role of mature domains in targeting and secretion is unclear. We now reveal that mature domains harbor their own independent targeting signals (mature domain targeting signals [MTSs]). These are multiple, degenerate, interchangeable, linear or 3D hydrophobic stretches that become available because of the unstructured states of targeting-competent preproteins. Their receptor site on the cytoplasmic face of the SecYEG-bound SecA is also of hydrophobic nature and is located adjacent to the signal peptide cleft. Both the preprotein MTSs and their receptor site on SecA are essential for protein secretion. Evidently, mature domains have their own previously unsuspected distinct roles in preprotein targeting and secretion. © 2017 Chatzi et al.

Preprotein mature domains contain translocase targeting signals that are essential for secretion

PubMed Central

Tsirigotaki, Alexandra; Koukaki, Marina; Šoštarić, Nikolina; Konijnenberg, Albert; Sobott, Frank; Kalodimos, Charalampos G.; Karamanou, Spyridoula

2017-01-01

Secretory proteins are only temporary cytoplasmic residents. They are typically synthesized as preproteins, carrying signal peptides N-terminally fused to their mature domains. In bacteria secretion largely occurs posttranslationally through the membrane-embedded SecA-SecYEG translocase. Upon crossing the plasma membrane, signal peptides are cleaved off and mature domains reach their destinations and fold. Targeting to the translocase is mediated by signal peptides. The role of mature domains in targeting and secretion is unclear. We now reveal that mature domains harbor their own independent targeting signals (mature domain targeting signals [MTSs]). These are multiple, degenerate, interchangeable, linear or 3D hydrophobic stretches that become available because of the unstructured states of targeting-competent preproteins. Their receptor site on the cytoplasmic face of the SecYEG-bound SecA is also of hydrophobic nature and is located adjacent to the signal peptide cleft. Both the preprotein MTSs and their receptor site on SecA are essential for protein secretion. Evidently, mature domains have their own previously unsuspected distinct roles in preprotein targeting and secretion. PMID:28404644

NASA CORE - A Worldwide Distribution Center for Educational Materials.

NASA Astrophysics Data System (ADS)

Kaiser-Holscott, K.

2005-05-01

The Lorain County Joint Vocational School District (JVS) administers NASA's Central Operation of Resources for Educators (CORE) for the purpose of: A. Operating a mail order service to supply educators around the world with NASA's educational materials; B. Servicing NASA Education Programs/Projects with NASA's educational materials; C. Supporting the NASA Educator Resource Center Network with technology resources for the next generation of ERC. D. Support NASA's mission to inspire the next generation of explorers...as only NASA can; E. Inspire and motivate students to pursue careers in geography, science, technology, engineering and mathematics. This is accomplished by the continued operation of a central site that educators can contact to obtain information about NASA educational programs and research; obtain NASA educational publications and media; and receive technical support for NASA multimedia materials. In addition CORE coordinates the efforts of the 67 NASA Educator Resource Centers to establish a more effective network to serve educators. CORE directly supports part of NASA's core mission, To Inspire the Next Generation of Explorers.as only NASA can. CORE inspires and motivates students to pursue careers in geography, science, technology, engineering and mathematics by providing educators with exciting and NASA-unique educational material to enhance the students' learning experience. CORE is located at the Lorain County Joint Vocational School (JVS) in Oberlin, Ohio. Students at the JVS assist with the daily operations of CORE. This assistance provides the students with valuable vocational training opportunities and helps the JVS reduce the amount of funding needed to operate CORE. CORE has vast experience in the dissemination of NASA educational materials as well as a network of NASA Education Resource Centers who distribute NASA materials to secondary and post-secondary schools and universities, informal educators, and other interested individuals and organizations. CORE would be a valuable resource for the distribution of Earth and Space Science products presented to the Joint Assembly.

Identifying Major Transitions in the Evolution of Lithic Cutting Edge Production Rates

PubMed Central

Clarkson, Chris

2016-01-01

The notion that the evolution of core reduction strategies involved increasing efficiency in cutting edge production is prevalent in narratives of hominin technological evolution. Yet a number of studies comparing two different knapping technologies have found no significant differences in edge production. Using digital analysis methods we present an investigation of raw material efficiency in eight core technologies broadly representative of the long-term evolution of lithic technology. These are bipolar, multiplatform, discoidal, biface, Levallois, prismatic blade, punch blade and pressure blade production. Raw material efficiency is assessed by the ratio of cutting edge length to original core mass. We also examine which flake attributes contribute to maximising raw material efficiency, as well as compare the difference between expert and intermediate knappers in terms of cutting edge produced per gram of core. We identify a gradual increase in raw material efficiency over the broad sweep of lithic technological evolution. The results indicate that the most significant transition in efficiency likely took place with the introduction of small foliate biface, Levallois and prismatic blade knapping, all introduced in the Middle Stone Age / Middle Palaeolithic among early Homo sapiens and Neanderthals. This suggests that no difference in raw material efficiency existed between these species. With prismatic blade technology securely dated to the Middle Palaeolithic, by including the more recent punch and pressure blade technology our results dispel the notion that the transition to the Upper Palaeolithic was accompanied by an increase in efficiency. However, further increases in cutting edge efficiency are evident, with pressure blades possessing the highest efficiency in this study, indicating that late/epi-Palaeolithic and Neolithic blade technologies further increased efficiency. PMID:27936135

Identifying Major Transitions in the Evolution of Lithic Cutting Edge Production Rates.

PubMed

Muller, Antoine; Clarkson, Chris

2016-01-01

The notion that the evolution of core reduction strategies involved increasing efficiency in cutting edge production is prevalent in narratives of hominin technological evolution. Yet a number of studies comparing two different knapping technologies have found no significant differences in edge production. Using digital analysis methods we present an investigation of raw material efficiency in eight core technologies broadly representative of the long-term evolution of lithic technology. These are bipolar, multiplatform, discoidal, biface, Levallois, prismatic blade, punch blade and pressure blade production. Raw material efficiency is assessed by the ratio of cutting edge length to original core mass. We also examine which flake attributes contribute to maximising raw material efficiency, as well as compare the difference between expert and intermediate knappers in terms of cutting edge produced per gram of core. We identify a gradual increase in raw material efficiency over the broad sweep of lithic technological evolution. The results indicate that the most significant transition in efficiency likely took place with the introduction of small foliate biface, Levallois and prismatic blade knapping, all introduced in the Middle Stone Age / Middle Palaeolithic among early Homo sapiens and Neanderthals. This suggests that no difference in raw material efficiency existed between these species. With prismatic blade technology securely dated to the Middle Palaeolithic, by including the more recent punch and pressure blade technology our results dispel the notion that the transition to the Upper Palaeolithic was accompanied by an increase in efficiency. However, further increases in cutting edge efficiency are evident, with pressure blades possessing the highest efficiency in this study, indicating that late/epi-Palaeolithic and Neolithic blade technologies further increased efficiency.

Operation of a solid oxide fuel cell on biodiesel with a partial oxidation reformer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siefert, N, Shekhawat, D.; Gemmen, R.; Berry, D.

The National Energy Technology Laboratory’s Office of Research & Development (NETL/ORD) has successfully demonstrated the operation of a solid oxide fuel cell (SOFC) using reformed biodiesel. The biodiesel for the project was produced and characterized by West Virginia State University (WVSU). This project had two main aspects: 1) demonstrate a catalyst formulation on monolith for biodiesel fuel reforming; and 2) establish SOFC stack test stand capabilities. Both aspects have been completed successfully. For the first aspect, in–house patented catalyst specifications were developed, fabricated and tested. Parametric reforming studies of biofuels provided data on fuel composition, catalyst degradation, syngas composition, andmore » operating parameters required for successful reforming and integration with the SOFC test stand. For the second aspect, a stack test fixture (STF) for standardized testing, developed by Pacific Northwest National Laboratory (PNNL) and Lawrence Berkeley National Laboratory (LBNL) for the Solid Energy Conversion Alliance (SECA) Program, was engineered and constructed at NETL. To facilitate the demonstration of the STF, NETL employed H.C. Starck Ceramics GmbH & Co. (Germany) anode supported solid oxide cells. In addition, anode supported cells, SS441 end plates, and cell frames were transferred from PNNL to NETL. The stack assembly and conditioning procedures, including stack welding and sealing, contact paste application, binder burn-out, seal-setting, hot standby, and other stack assembly and conditioning methods were transferred to NETL. In the future, fuel cell stacks provided by SECA or other developers could be tested at the STF to validate SOFC performance on various fuels. The STF operated on hydrogen for over 1000 hrs before switching over to reformed biodiesel for 100 hrs of operation. Combining these first two aspects led to demonstrating the biodiesel syngas in the STF. A reformer was built and used to convert 0.5 ml/min of biodiesel into mostly hydrogen and carbon monoxide (syngas.) The syngas was fed to the STF and fuel cell stack. The results presented in this experimental report document one of the first times a SOFC has been operated on syngas from reformed biodiesel.« less

Fused-core particle technology as an alternative to sub-2-microm particles to achieve high separation efficiency with low backpressure.

PubMed

Cunliffe, Jennifer M; Maloney, Todd D

2007-12-01

Fused-Core particles have recently been introduced as an alternative to using sub-2-microm particles in chromatographic separations. Fused-Core particles are composed of a 1.7 microm solid core surrounded by a 0.5 microm porous silica layer (d(p) = 2.7 microm) to reduce mass transfer and increase peak efficiency. The performance of two commercially available Fused-Core particles (Advanced Materials Technology Halo C18 and Supelco Ascentis Express C18) was compared with sub-2-microm particles from Waters, Agilent, and Thermo Scientific. Although the peak efficiencies were only approximately 80% of those obtained by the Waters Acquity particles, the 50% lower backpressure allowed columns to be coupled in series to increase peak efficiency to 92,750 plates. The low backpressure and high efficiencies of the Fused-Core particles offer a viable alternative to using sub-2-microm particles and very-high-pressure LC instrumentation.

Structural and electronic properties of CdS/ZnS core/shell nanowires: A first-principles study

NASA Astrophysics Data System (ADS)

Kim, Hyo Seok; Kim, Yong-Hoon

2015-03-01

Carrying out density functional theory (DFT) calculation, we studied the relative effects of quantum confinement and strain on the electronic structures of II-IV semiconductor compounds with a large lattice-mismatch, CdS and ZnS, in the core/shell nanowire geometry. We considered different core radii and shell thickness of the CdS/ZnS core/shell nanowire, different surface facets, and various defects in the core/shell interface and surface regions. To properly describe the band level alignment at the core/shell boundary, we adopted the self-interaction correction (SIC)-DFT scheme. Implications of our findings in the context of device applications will be also discussed. This work was supported by the Basic Science Research Grant (No. 2012R1A1A2044793), Global Frontier Program (No. 2013-073298), and Nano-Material Technology Development Program (2012M3A7B4049888) of the National Research Foundation funded by the Ministry of Education, Science and Technology of Korea. Corresponding author

Learning and using technology in intertwined processes: a study of people with mild cognitive impairment or Alzheimer's disease.

PubMed

Rosenberg, Lena; Nygård, Louise

2014-09-01

People with mild cognitive impairment and Alzheimer's disease are likely to be challenged by the multitude of everyday technology in today's society. The aim of this study was to explore how they try to prohibit, avoid or solve problems in everyday technology use, maintain skills, and learn to use new technology. To explore how the participants applied and reasoned about using everyday technology in real-life situations interviews were conducted while the participants used their own technology in their homes. Interviews were conducted with 20 participants with mild cognitive impairment (n = 10) or Alzheimer's disease (n = 10). The analyses were inspired from grounded theory and resulted in one core category and three sub-categories that represent sub-processes in the core. The core finding presents a continuous, intertwined process of learning and using everyday technology, highlighting how the context was interwoven in the processes. The participants used a rich variety of management strategies when approaching technology, including communication with the everyday technologies on different levels. The findings underscore that it is important to support continued use of everyday technology as long as it is valued and relevant to the person with mild cognitive impairment or Alzheimer's disease. The intertwined process of learning and using everyday technology suggests how support could target different sub-processes. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

INNOVATIVE TECHNOLOGY EVALUATION REPORT ...

EPA Pesticide Factsheets

The Split Core Sampler for Submerged Sediments (Split Core Sampler) designed and fabricated by Arts Manufacturing & Supply, Inc., was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation Program in April and May 1999 at sites in EPA Regions 1 and 5, respectively. In addition to assessing ease of sampler operation, key objectives of the demonstration included evaluating the samplers ability to (1) consistently collect a given volume of sediment, (2) consistently collect sediment in a given depth interval, (3) collect samples with consistent characteristics from a homogenous layer of sediment, and (4) collect samples under a variety of site conditions. This report describes the demonstration results for the Split Core Sampler and two conventional samplers (the Hand Corer and Vibrocorer) used as reference samplers. During the demonstration, the Split Core Sampler performed as well as or better than the reference samplers. Based on visual observations, both the Split Core Sampler and reference samplers collected partially compressed samples of consolidated and unconsolidated sediments from the sediment surface downward; sample representativeness may be questionable because of core shortening and core compression. Sediment stratification was preserved for both consolidated and unconsolidated sediment samples collected by the Split Core Sampler and reference samplers. No sampler was able to collect samples

Challenges for proteomics core facilities.

PubMed

Lilley, Kathryn S; Deery, Michael J; Gatto, Laurent

2011-03-01

Many analytical techniques have been executed by core facilities established within academic, pharmaceutical and other industrial institutions. The centralization of such facilities ensures a level of expertise and hardware which often cannot be supported by individual laboratories. The establishment of a core facility thus makes the technology available for multiple researchers in the same institution. Often, the services within the core facility are also opened out to researchers from other institutions, frequently with a fee being levied for the service provided. In the 1990s, with the onset of the age of genomics, there was an abundance of DNA analysis facilities, many of which have since disappeared from institutions and are now available through commercial sources. Ten years on, as proteomics was beginning to be utilized by many researchers, this technology found itself an ideal candidate for being placed within a core facility. We discuss what in our view are the daily challenges of proteomics core facilities. We also examine the potential unmet needs of the proteomics core facility that may also be applicable to proteomics laboratories which do not function as core facilities. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Identification of New Factors Modulating Adhesion Abilities of the Pioneer Commensal Bacterium Streptococcus salivarius

PubMed Central

Couvigny, Benoit; Kulakauskas, Saulius; Pons, Nicolas; Quinquis, Benoit; Abraham, Anne-Laure; Meylheuc, Thierry; Delorme, Christine; Renault, Pierre; Briandet, Romain; Lapaque, Nicolas; Guédon, Eric

2018-01-01

Biofilm formation is crucial for bacterial community development and host colonization by Streptococcus salivarius, a pioneer colonizer and commensal bacterium of the human gastrointestinal tract. This ability to form biofilms depends on bacterial adhesion to host surfaces, and on the intercellular aggregation contributing to biofilm cohesiveness. Many S. salivarius isolates auto-aggregate, an adhesion process mediated by cell surface proteins. To gain an insight into the genetic factors of S. salivarius that dictate host adhesion and biofilm formation, we developed a screening method, based on the differential sedimentation of bacteria in semi-liquid conditions according to their auto-aggregation capacity, which allowed us to identify twelve mutations affecting this auto-aggregation phenotype. Mutations targeted genes encoding (i) extracellular components, including the CshA surface-exposed protein, the extracellular BglB glucan-binding protein, the GtfE, GtfG and GtfH glycosyltransferases and enzymes responsible for synthesis of cell wall polysaccharides (CwpB, CwpK), (ii) proteins responsible for the extracellular localization of proteins, such as structural components of the accessory SecA2Y2 system (Asp1, Asp2, SecA2) and the SrtA sortase, and (iii) the LiaR transcriptional response regulator. These mutations also influenced biofilm architecture, revealing that similar cell-to-cell interactions govern assembly of auto-aggregates and biofilm formation. We found that BglB, CshA, GtfH and LiaR were specifically associated with bacterial auto-aggregation, whereas Asp1, Asp2, CwpB, CwpK, GtfE, GtfG, SecA2 and SrtA also contributed to adhesion to host cells and host-derived components, or to interactions with the human pathogen Fusobacterium nucleatum. Our study demonstrates that our screening method could also be used to identify genes implicated in the bacterial interactions of pathogens or probiotics, for which aggregation is either a virulence trait or an advantageous feature, respectively. PMID:29515553

The C's of Our Sea Change: Plans for Training Staff, from Core Competencies to Learning 2.0

ERIC Educational Resources Information Center

Blowers, Helene; Reed, Lori

2007-01-01

This article explains a two-part plan, created by the people at the Public Library of Charlotte & Mecklenburg County (PLCMC), to help staff members keep up with the sea change of technology. A core competencies training program was developed. This keeps workers afloat by providing them with the technology skills they need to support the change…

Multi-Core Processors: An Enabling Technology for Embedded Distributed Model-Based Control (Postprint)

DTIC Science & Technology

2008-07-01

generation of process partitioning, a thread pipelining becomes possible. In this paper we briefly summarize the requirements and trends for FADEC based... FADEC environment, presenting a hypothetical realization of an example application. Finally we discuss the application of Time-Triggered...based control applications of the future. 15. SUBJECT TERMS Gas turbine, FADEC , Multi-core processing technology, disturbed based control

Simulation Based Optimization of Complex Monolithic Composite Structures Using Cellular Core Technology

NASA Astrophysics Data System (ADS)

Hickmott, Curtis W.

Cellular core tooling is a new technology which has the capability to manufacture complex integrated monolithic composite structures. This novel tooling method utilizes thermoplastic cellular cores as inner tooling. The semi-rigid nature of the cellular cores makes them convenient for lay-up, and under autoclave temperature and pressure they soften and expand providing uniform compaction on all surfaces including internal features such as ribs and spar tubes. This process has the capability of developing fully optimized aerospace structures by reducing or eliminating assembly using fasteners or bonded joints. The technology is studied in the context of evaluating its capabilities, advantages, and limitations in developing high quality structures. The complex nature of these parts has led to development of a model using the Finite Element Analysis (FEA) software Abaqus and the plug-in COMPRO Common Component Architecture (CCA) provided by Convergent Manufacturing Technologies. This model utilizes a "virtual autoclave" technique to simulate temperature profiles, resin flow paths, and ultimately deformation from residual stress. A model has been developed simulating the temperature profile during curing of composite parts made with the cellular core technology. While modeling of composites has been performed in the past, this project will look to take this existing knowledge and apply it to this new manufacturing method capable of building more complex parts and develop a model designed specifically for building large, complex components with a high degree of accuracy. The model development has been carried out in conjunction with experimental validation. A double box beam structure was chosen for analysis to determine the effects of the technology on internal ribs and joints. Double box beams were manufactured and sectioned into T-joints for characterization. Mechanical behavior of T-joints was performed using the T-joint pull-off test and compared to traditional tooling methods. Components made with the cellular core tooling method showed an improved strength at the joints. It is expected that this knowledge will help optimize the processing of complex, integrated structures and benefit applications in aerospace where lighter, structurally efficient components would be advantageous.

What Core Competencies Are Related to Teachers' Innovative Teaching?

ERIC Educational Resources Information Center

Zhu, Chang; Wang, Di; Cai, Yonghong; Engels, Nadine

2013-01-01

The purpose of this study is to investigate teachers' core competencies in relation to their innovative teaching performance. Based on the literature and previous studies in this field, four competencies (learning competency, educational competency, social competency and technological competency) are theorised as core competencies for teachers'…

Research on the influence of moulding-casting technology on the quality of castings

NASA Astrophysics Data System (ADS)

Josan, A.; Pinca Bretotean, C.; Raţiu, S.; Ardelean, E.; Ardelean, M.

2017-05-01

The quality of castings has a particularly role in the Romanian foundries. In this context, quality assurance is the overall objective of the foundries. The paper presents the critical analysis performed on moulding-casting technology of the type Lifting mechanism. This casting is a subset of the lifting and rotating mechanism of the furnace vault. The casting analysed is a medium size, with weight of 114 kg. The current moulding-casting technology involves moulding into three mould-parts leading to the occurrence of defects (decentering of the core, displacement of the lower mould and the middle mould and occurrence of burrs in area separated. Thus, to reduce the percentage of defects registered in industrial practice is necessary to change the moulding-casting technology. This requires the use of two mould-parts, re-dimensioning of the core and the core box and dimensioning of the runner network. The adoption of these changes in industrial practice has direct implications on the cost of casting and foundry costs default.

Taking mHealth Forward: Examining the Core Characteristics

PubMed Central

2016-01-01

The emergence of mobile health (mHealth) offers unique and varied opportunities to address some of the most difficult problems of health. Some of the most promising and active efforts of mHealth involve the engagement of mobile phone technology. As this technology has spread and as this technology is still evolving, we begin a conversation about the core characteristics of mHealth relevant to any mobile phone platform. We assert that the relevance of these characteristics to mHealth will endure as the technology advances, so an understanding of these characteristics is essential to the design, implementation, and adoption of mHealth-based solutions. The core characteristics we discuss are (1) the penetration or adoption into populations, (2) the availability and form of apps, (3) the availability and form of wireless broadband access to the Internet, and (4) the tethering of the device to individuals. These collectively act to both enable and constrain the provision of population health in general, as well as personalized and precision individual health in particular. PMID:27511612

A study on technology development strategy and collaborative relationships using patent information

NASA Astrophysics Data System (ADS)

Nakaoka, Iori; Fujino, Hayato; Chen, Yunju; Park, Yousin; Matsuno, Seigo

2017-10-01

Japanese economy has fallen into a long downturn called "The Lost Two Decades" after the collapse of bubble economy in early 1990s. Many companies could not gain competitive advantages although they conducted various management reforms to restore their competitiveness. The companies that have played the main role of the Japanese economy growth until then have lost the sustained competitive advantage. Moreover, they have struggled in the global market even now. On the other hand, Japanese automobile companies have high competitiveness and market share due to their advanced technology development. It is considered that personnel groups engaged in research and development of their companies cannot turn into core rigidity and the structure also hinders new core capabilities. In addition, there is a hypothesis that the close relationships with many suppliers contribute to acquisition of competitive advantage. Therefore, this paper focuses on the collaboration relationships with suppliers and core rigidity of human resources related to research and development as the analysis factors. First, we analyze the composition and core rigidity degree of human resources involved in technology development by social network analysis using patent information, which represents the research and development capability. Second, we analyze the degree of collaboration among companies based on the hypothesis that advanced technology development can be executed by joint research and developments with many kinds of suppliers. As a result, features of close collaboration with suppliers and high core rigidity rate in the Japanese automobile industry are clarified.

[Assessment of two applications of medication self-management in older patients. Qualitative study].

PubMed

Carrillo, I; Guilabert, M; Pérez-Jover, V; Mira, J J

2015-01-01

The aging population and the growing use of technology are two realities of modern society. Developing tools to support medication self-management to polymedicated elderly may contribute to increase their safety. To know how patients polymedicated and older than 64 years manage dose their medication and assessment the utility of two medication self-management applications, specifically analyzing management systems, medication errors and positive and improvable aspects of each of the tools presented. Seven focal groups with 59 patients from associations and health departments were conducted. In such meetings, they received the applications and they were encouraged to use it. Then, a several group questions were asked them about their health status, how they managed their medication and their assessment about the applications. Most participants reported to use memory strategies to take correctly their medication. They assessed positively the applications although some of them showed resistance to incorporate it in their daily routine. The simple interface and ease of use were the characteristics of the applications most appreciated by patients. Is possible to foster among elderly patients the use of technological tools to support the proper administration of medications with purpose is to decrease errors and increase safety. When designing health applications is necessary to take into account the preferences of those who are targeted. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

The Information Systems Core: A Study from the Perspective of IS Core Curricula in the U.S.

ERIC Educational Resources Information Center

Hwang, Drew; Ma, Zhongming; Wang, Ming

2015-01-01

To keep up with technology changes and industry trends, it is essential for Information Systems (IS) programs to maintain up to date curricula. In doing so, IS educators need to determine what the IS core is and implement it in their curriculum. This study performed a descriptive analysis of 2,229 core courses offered by 394 undergraduate IS…

Isolated in a technologically connected world?: Changes in the core professional ties of female researchers in Ghana, Kenya, and Kerala, India.

PubMed

Miller, B Paige; Shrum, Wesley

2012-01-01

Using panel data gathered across two waves (2001 and 2005) from researchers in Ghana, Kenya, and Kerala, India, we examine three questions: (1) To what extent do gender differences exist in the core professional networks of scientists in low-income areas? (2) How do gender differences shift over time? (3) Does use of information and communication technologies (ICTs) mediate the relationship between gender and core network composition? Our results indicate that over a period marked by dramatic increases in access to and use of various ICTs, the composition and size of female researchers core professional ties have either not changed significantly or have changed in an unexpected direction. Indeed, the size of women's ties are retracting over time rather than expanding.

Coupling Cover Crops with Alternative Swine Manure Application Strategies: Manure-15N Tracer Studies

USDA-ARS?s Scientific Manuscript database

Integration of rye cover crops with alternative liquid swine (Sus scrofa L.) manure application strategies may enhance retention of manure N in corn (Zea mays L.) - soybean [Glycine max (L.) Merr] cropping systems. The objective of this study was to quantify uptake of manure derived-N by a rye (Seca...

77 FR 60777 - Endangered and Threatened Wildlife and Plants; Determination of Endangered Species Status for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-04

... herbaceous wetland on the closed U.S. Naval Security Group Activity Sabana Seca (USNSGASS) property and the... comments we received were grouped into four general issues specifically relating to the proposed listing... responses from four of those individuals. We reviewed all comments we received from the peer reviewers for...

Effects of Technological Advances in Surgical Education on Quantitative Outcomes From Residency Programs.

PubMed

Dietl, Charles A; Russell, John C

2016-01-01

The purpose of this article is to review the literature on current technology for surgical education and to evaluate the effect of technological advances on the Accreditation Council of Graduate Medical Education (ACGME) Core Competencies, American Board of Surgery In-Training Examination (ABSITE) scores, and American Board of Surgery (ABS) certification. A literature search was obtained from MEDLINE via PubMed.gov, ScienceDirect.com, and Google Scholar on all peer-reviewed studies published since 2003 using the following search queries: technology for surgical education, simulation-based surgical training, simulation-based nontechnical skills (NTS) training, ACGME Core Competencies, ABSITE scores, and ABS pass rate. Our initial search list included the following: 648 on technology for surgical education, 413 on simulation-based surgical training, 51 on simulation-based NTS training, 78 on ABSITE scores, and 33 on ABS pass rate. Further, 42 articles on technological advances for surgical education met inclusion criteria based on their effect on ACGME Core Competencies, ABSITE scores, and ABS certification. Systematic review showed that 33 of 42 and 26 of 42 publications on technological advances for surgical education showed objective improvements regarding patient care and medical knowledge, respectively, whereas only 2 of 42 publications showed improved ABSITE scores, but none showed improved ABS pass rates. Improvements in the other ACGME core competencies were documented in 14 studies, 9 of which were on simulation-based NTS training. Most of the studies on technological advances for surgical education have shown a positive effect on patient care and medical knowledge. However, the effect of simulation-based surgical training and simulation-based NTS training on ABSITE scores and ABS certification has not been assessed. Studies on technological advances in surgical education and simulation-based NTS training showing quantitative evidence that surgery residency program objectives are achieved are still needed. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Tissue engineering: confronting the transplantation crisis.

PubMed

Nerem, R M

2000-01-01

Tissue engineering is the development of biological substitutes and/or the fostering of tissue regeneration/remodelling. It is emerging as a technology which has the potential to confront the crisis in transplantation caused by the shortage of donor tissues and organs. With the development of this technology, ther is emerging a new industry which is at the interface of biotechnology and the traditional medical implant field. For this technology and the associated industry to realize their full potential, there are core, enabling technologies that need to be developed. This is the focus of the Georgia Tech/Emory Center for the Engineering of Living Tissues, newly established in the United States, with an Engineering Research Center Award from the National Science Foundation. With the development of these core technologies, tissue engineering will evolve from an art form to a technology based on science and engineering.

Assessment of Lumbar Lordosis and Lumbar Core Strength in Information Technology Professionals.

PubMed

Mehta, Roma Satish; Nagrale, Sanket; Dabadghav, Rachana; Rairikar, Savita; Shayam, Ashok; Sancheti, Parag

2016-06-01

Observational study. To correlate lumbar lordosis and lumbar core strength in information technology (IT) professionals. IT professionals have to work for long hours in a sitting position, which can affect lumbar lordosis and lumbar core strength. Flexicurve was used to assess the lumbar lordosis, and pressure biofeedback was used to assess the lumbar core strength in the IT professionals. All subjects, both male and female, with and without complaint of low back pain and working for two or more years were included, and subjects with a history of spinal surgery or spinal deformity were excluded from the study. Analysis was done using Pearson's correlation. For the IT workers, no correlation was seen between lumbar lordosis and lumbar core strength (r=-0.04); however, a weak negative correlation was seen in IT people who complained of pain (r=-0.12), while there was no correlation of lumbar lordosis and lumbar core in IT people who had no complains of pain (r=0.007). The study shows that there is no correlation of lumbar lordosis and lumbar core strength in IT professionals, but a weak negative correlation was seen in IT people who complained of pain.

EDUCAUSE Core Data Service: Fiscal Year 2006 Summary Report

ERIC Educational Resources Information Center

Hawkins, Brian L.; Rudy, Julia A.

2007-01-01

EDUCAUSE Core Data Service Fiscal Year 2006 Summary Report summarizes much of the data collected through the 2006 EDUCAUSE core data survey about campus information technology (IT) environments at 933 colleges and universities in the U.S. and abroad. The report presents aggregates of data through more than 100 tables and accompanying descriptive…

Curriculum Diversity through a Core Approach to Ethics.

ERIC Educational Resources Information Center

Englehardt, Elaine Eliason

In 1987, a sophomore level interdisciplinary Ethics and Values (EV) core course was implemented at Utah Valley Community College in Orem, serving as the humanities core among the liberal education requirements, a requirement for business students, a vital force in the nursing program, and a means to enrich the trade and technology courses. The…

EDUCAUSE Core Data Service: Fiscal Year 2007 Summary Report

ERIC Educational Resources Information Center

Hawkins, Brian L.; Rudy, Julia A.

2008-01-01

EDUCAUSE Core Data Service Fiscal Year 2007 Summary Report summarizes much of the data collected through the 2007 EDUCAUSE core data survey about campus information technology (IT) environments at 994 colleges and universities in the U.S. and abroad. The report presents aggregates of data through more than 100 tables and accompanying descriptive…

A Quantitative Assessment of the Research Chefs Association Core Competencies for the Practicing Culinologist

ERIC Educational Resources Information Center

Bissett, Rachel L.; Cheng, Michael S. H.; Brannan, Robert G.

2010-01-01

Professional organizations have linked core competency to professional success and competitive strategy. The Research Chefs Assn. (RCA) recently released 43 core competencies for practicing culinologists. Culinology[R] is a profession that links skills of culinary arts and food science and technology in the development of food products. An online…

Core-Noise

NASA Technical Reports Server (NTRS)

Hultgren, Lennart S.

2010-01-01

This presentation is a technical progress report and near-term outlook for NASA-internal and NASA-sponsored external work on core (combustor and turbine) noise funded by the Fundamental Aeronautics Program Subsonic Fixed Wing (SFW) Project. Sections of the presentation cover: the SFW system level noise metrics for the 2015, 2020, and 2025 timeframes; the emerging importance of core noise and its relevance to the SFW Reduced-Noise-Aircraft Technical Challenge; the current research activities in the core-noise area, with some additional details given about the development of a high-fidelity combustion-noise prediction capability; the need for a core-noise diagnostic capability to generate benchmark data for validation of both high-fidelity work and improved models, as well as testing of future noise-reduction technologies; relevant existing core-noise tests using real engines and auxiliary power units; and examples of possible scenarios for a future diagnostic facility. The NASA Fundamental Aeronautics Program has the principal objective of overcoming today's national challenges in air transportation. The SFW Reduced-Noise-Aircraft Technical Challenge aims to enable concepts and technologies to dramatically reduce the perceived aircraft noise outside of airport boundaries. This reduction of aircraft noise is critical for enabling the anticipated large increase in future air traffic. Noise generated in the jet engine core, by sources such as the compressor, combustor, and turbine, can be a significant contribution to the overall noise signature at low-power conditions, typical of approach flight. At high engine power during takeoff, jet and fan noise have traditionally dominated over core noise. However, current design trends and expected technological advances in engine-cycle design as well as noise-reduction methods are likely to reduce non-core noise even at engine-power points higher than approach. In addition, future low-emission combustor designs could increase the combustion-noise component. The trend towards high-power-density cores also means that the noise generated in the low-pressure turbine will likely increase. Consequently, the combined result from these emerging changes will be to elevate the overall importance of turbomachinery core noise, which will need to be addressed in order to meet future noise goals.

Quartz Knapping Strategies in the Howiesons Poort at Sibudu (KwaZulu-Natal, South Africa)

PubMed Central

de la Peña, Paloma; Wadley, Lyn

2014-01-01

The variability associated with Sibudu's Howiesons Poort Industry highlights the unpredictable trajectory of technology in the Middle Stone Age. We reach this conclusion through a study of the technology on quartz from one of the Howiesons Poort layers (Grey Sand) from Sibudu rock shelter. Quartz bifacial technology has previously been described at the site, but this new in-depth study of the quartz technology reveals other strategies. First is the recurring employment of bipolar knapping, formerly considered as a defining feature of the Later Stone Age. Secondly, we highlight a laminar technology with emphasis on small quartz bladelets. Bipolar cores are most common, followed by prismatic cores. The knapping strategies in Grey Sand seem to involve systematic recycling and the deliberate production of microliths. PMID:25014352

Advanced mirror technology development (AMTD): year five status

NASA Astrophysics Data System (ADS)

Stahl, H. Philip

2017-09-01

The Advanced Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort initiated in Fiscal Year (FY) 2012, to mature the Technology Readiness Level (TRL) of critical technologies required to enable 4-m-orlarger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics, ultra-high-contrast observations of exoplanets, and National Interest missions. Key accomplishments of 2016/17 include the completion of the Harris Corp 150 Hz 1.5-meter Ultra-Low Expansion (ULE) mirror substrate using stacked core method to demonstrate lateral stability of the stacked core technology, as well as the characterization and validation by test of the mechanical and thermal performance of the 1.2-meter Zerodur mirror using the STOP model prediction and verification of CTE homogeneity.

Innovative nuclear thermal propulsion technology evaluation - Results of the NASA/DOE task team study

NASA Technical Reports Server (NTRS)

Howe, Steven D.; Borowski, Stanley; Motloch, Chet; Helms, Ira; Diaz, Nils; Anghaie, Samim; Latham, Thomas

1991-01-01

In response to findings from two NASA/DOE nuclear propulsion workshops, six task teams were created to continue evaluation of various propulsion concepts, from which evolved an innovative concepts subpanel to evaluate thermal propulsion concepts which did not utilize solid fuel. This subpanel endeavored to evaluate each concept on a level technology basis, and to identify critical issues, technologies, and early proof-of-concept experiments. Results of the concept studies including the liquid core fission, the gas core fission, the fission foil reactors, explosively driven systems, fusion, and antimatter are presented.

Special Advanced Course for Core Sciences to Bring Up Project Leaders

NASA Astrophysics Data System (ADS)

Inagaki, Kenji; Tabata, Nobuhisa; Gofuku, Akio; Harada, Isao; Takada, Jun

Special Advanced Course for Core Sciences has been introduced recently to Graduate School of Natural Science and Technology, Okayama University, to bring up a project leader. The following points are key education goals in this program : (1) knowledge of core sciences, (2) communication ability by using English, and (3) wide viewpoints for researches. In order to accomplish these goals, several lectures for core sciences, patent systems and engineering ethics as well as long term internships by the collaboration with some regional companies have been put in practice. In this paper, we describe the outline of the program, educational effects, and our experiences. Then, we discuss how effective the program is for bringing up an engineer or a scientist who can lead sciences and technologies of their domains. This paper also describes current activities of the program.

Early Student Support for Application of Advanced Multi-Core Processor Technologies to Oceanographic Research

DTIC Science & Technology

2016-05-07

REPORT DOCUMENTATION PAGE I . ... ... .. . ,...,.., ............. OMB No. 0704-0188 The public reporting burden for this collection of...Student Support for Appl ication of Advanced Multi- Core Processor N00014-12-1-0298 Technologies to Oceanographic Research Sb. GRANT NUMBER Sc...communications protocols (i.e. UART, I2C, and SPI), through the , ’ . handing off of the data to the server APis. By providing a common set of tools

Energy efficient engine. Volume 2. Appendix A: Component development and integration program

NASA Technical Reports Server (NTRS)

Moracz, D. J.; Cook, C. R.

1981-01-01

The large size and the requirement for precise lightening cavities in a considerable portion of the titanium fan blades necessitated the development of a new manufacturing method. The approach which was selected for development incorporated several technologies including HIP diffusion bonding of titanium sheet laminates containing removable cores and isothermal forging of the blade form. The technology bases established in HIP/DB for composite blades and in isothermal forging for fan blades were applicable for development of the manufacturing process. The process techniques and parameters for producing and inspecting the cored diffusion bonded titanium laminate blade preform were established. The method was demonstrated with the production of twelve hollow simulated blade shapes for evaluation. Evaluations of the critical experiments conducted to establish procedures to produce hollow structures by a laminate/core/diffusion bonding approach are included. In addition the transfer of this technology to produce a hollow fan blade is discussed.

Evaluating core technology capacity based on an improved catastrophe progression method: the case of automotive industry

NASA Astrophysics Data System (ADS)

Zhao, Shijia; Liu, Zongwei; Wang, Yue; Zhao, Fuquan

2017-01-01

Subjectivity usually causes large fluctuations in evaluation results. Many scholars attempt to establish new mathematical methods to make evaluation results consistent with actual objective situations. An improved catastrophe progression method (ICPM) is constructed to overcome the defects of the original method. The improved method combines the merits of the principal component analysis' information coherence and the catastrophe progression method's none index weight and has the advantage of highly objective comprehensive evaluation. Through the systematic analysis of the influencing factors of the automotive industry's core technology capacity, the comprehensive evaluation model is established according to the different roles that different indices play in evaluating the overall goal with a hierarchical structure. Moreover, ICPM is developed for evaluating the automotive industry's core technology capacity for the typical seven countries in the world, which demonstrates the effectiveness of the method.

Printing polymer optical waveguides on conditioned transparent flexible foils by using the aerosol jet technology

NASA Astrophysics Data System (ADS)

Reitberger, Thomas; Hoffmann, Gerd-Albert; Wolfer, Tim; Overmeyer, Ludger; Franke, Joerg

2016-09-01

The optical data transfer is considered as the future of signal transfer due to its various advantages compared to conventional copper-based technologies. The Aerosol Jet Printing (AJP) technology offers the opportunity to print materials with high viscosities, such as liquid transparent polymer adhesives (epoxy resins), on almost any possible substrate material and even in third dimension. This paper introduces a new flexible and comparatively cost-effective way of generating polymer optical waveguides through AJP. Furthermore, the conditioning of the substrate material and the printing process of planar waveguides are presented. In the first step, two lines with hydrophobic behavior are applied on foil material (PMMA, PVC, PI) by using a flexographic printing machine. These silicone based patterns containing functional polymer form barriers for the core material due to their low surface energy after curing. In the second step, the core material (liquid polymer, varnish) is printed between the barrier lines. Because of the hydrophobic behavior of the lines, the contact angle between the substrate surface and the liquid core material is increased which yields to higher aspect ratio. The distance between the barrier lines is at least 100 μm, which defines the width of the waveguide. The minimum height of the core shall be 50 μm. After UV-curing of the core polymer, the cladding material is printed on the top. This is also applied by using the AJP technology. Various tests were performed to achieve the optimal surface properties for adequate adhesion and machine process parameters.

Understanding Preservice Teachers' Technology Use through TPACK Framework

ERIC Educational Resources Information Center

Pamuk, S.

2012-01-01

This study discusses preservice teachers' achievement barriers to technology integration, using principles of technological pedagogical content knowledge (TPACK) as an evaluative framework. Technology-capable participants each freely chose a content area to comprise project. Data analysis based on interactions among core components of TPACK…

Reliability Analysis of Surface Mount Technology (SMT)

DTIC Science & Technology

1993-03-01

INSULATING PROTECTIVE COAT RESISTIVE FILM CCYLINDRICALCCERAMIC CORE 15057-3 Figure 1.3.3.1-2. Metal Electrode Face Bonding (MELF) Resistor 1.3.3.2...control. The dielectric materials are typically G-10 or polyimide. Exotic applications such as porcelain on a core have been found. The core material must...invar cores that provide both a heatsink conduction path and mechanical restraint that forces the composite P&IS CTE to more closely match the SMD CTE

Population genetic analysis reveals a low level of genetic diversity of 'Candidatus Phytoplasma aurantifolia' causing witches' broom disease in lime.

PubMed

Al-Abadi, Shaikha Y; Al-Sadi, Abdullah M; Dickinson, Matthew; Al-Hammadi, Mohammed S; Al-Shariqi, Rashid; Al-Yahyai, Rashid A; Kazerooni, Elham A; Bertaccini, Assunta

2016-01-01

Witches' broom disease of lime (WBDL) is a serious phytoplasma disease of acid lime in Oman, the UAE and Iran. Despite efforts to study it, no systemic study attempted to characterize the relationship among the associated phytoplasma, ' Candidatus Phytoplasma aurantifolia', from the three countries. This study utilized sequences of the 16S rRNA, imp and secA genes to characterize 57 strains collected from Oman (38), the UAE (9) and Iran (10). Phylogenetic analysis based on the 16S rRNA gene showed that the 57 strains shared 98.5-100 % nucleotide similarity to each other and to strains of ' Ca . P. aurantifolia' available in GenBank. The level of genetic diversity was low based on the 16S rRNA (0-0.011), imp (0-0.002) and secA genes (0-0.015). The presence of low level of diversity among phytoplasma strains from Oman, the UAE and Iran can be explained by the movement of infected lime seedlings from one country to another through trading and exchange of infected plants. The study discusses implication of the findings on WBDL spread and management.

The Impact of a Technology Integration Academy on Instructional Technology Integration in a Texas School District

ERIC Educational Resources Information Center

Burkholder, Karla

2013-01-01

This applied dissertation was designed to determine the impact of a technology integration professional development on high school teachers' technology integration and students' use of computers in core content areas. The District invested in technology for all classrooms, as well as 1:1 technology for all secondary students with an expectation…

Using Digital Video Production to Meet the Common Core Standards

ERIC Educational Resources Information Center

Nichols, Maura

2012-01-01

The implementation of the Common Core Standards has just begun and these standards will impact a generation that communicates with technology more than anything else. Texting, cell phones, Facebook, YouTube, Skype, etc. are the ways they speak with their friends and the world. The Common Core Standards recognize this. According to the Common Core…

Progression in Technology Education in New Zealand: Components of Practice as a Way Forward

ERIC Educational Resources Information Center

Compton, Vicki; Harwood, Cliff

2005-01-01

Understanding and undertaking technological practice is fundamental to student learning in technology education in New Zealand, and the enhancement of student technological literacy. The implementation of technology into New Zealand's core curriculum has reached the stage where it has become critical that learning programmes are based on student…

Single mode fiber and twin-core fiber connection technique for in-fiber integrated interferometer

NASA Astrophysics Data System (ADS)

Yuan, Tingting; Zhang, Xiaotong; Guan, Chunying; Yang, Xinghua; Yuan, Libo

2015-09-01

A novel twin-core fiber connector has been made by two side-polished fibers. By using side polishing technique, we present a connector based on the twin-core fiber (TCF) and two D-shaped single-core fibers. After simple alignment and splicing, all fiber miniaturizing connector can be obtained. Two cores can operate independently and are non-interfering. The coupling loss of this connector is low and the fabrication technologies are mature. The connector device could be used for sensors or particle trapping.

Fabrication of a First Article Lightweight Composite Technology Demonstrator - Exospine

DTIC Science & Technology

2014-01-01

core, (b) 0/90, and (c) ± 45 ply cuts of ACG-MTM 45-1/CF0526 prepreg fabric...onboard diagnostics. 2. Experimental 2.1 Materials Plain woven carbon fiber/epoxy prepreg and a low-density foam core were provided to ARL for the...fabrication of the exospine technology demonstrator by UD-CCM. The prepreg was ACG - MTM∗ 45-1/CF0526 and has a cured ply thickness of 0.201 mm. It is

Advanced Mirror Technology Development (AMTD): Year Five Status

NASA Technical Reports Server (NTRS)

Stahl, H Philip

2017-01-01

The Advanced Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort initiated in Fiscal Year (FY) 2012, to mature the Technology Readiness Level (TRL) of critical technologies required to enable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics, ultra-high-contrast observations of exoplanets, and National Interest missions. Key accomplishments of 2016/17 include the completion of the Harris Corp approximately 150 Hz 1.5-meter Ultra-Low Expansion (ULE Registered trademark) mirror substrate using stacked core method to demonstrate lateral stability of the stacked core technology, as well as the characterization and validation by test of the mechanical and thermal performance of the 1.2-meter Zerodur (Registered trademark) mirror using the STOP model prediction and verification of CTE homogeneity.

Technology Leadership Is Just Good Leadership: Dispositions of Tech Savvy Superintendents

ERIC Educational Resources Information Center

Richardson, Jayson W.; McLeod, Scott; Sauers, Nick

2015-01-01

This study describes core dispositions of school district superintendents who have been identified as technology savvy leaders by a prominent educational technology newspaper. The superintendents in this study described how they accomplished their technology initiatives and offered suggestions for other superintendents who aspire to be more…

Paper Towers: Building Students' Understandings of Technological Design

ERIC Educational Resources Information Center

Minogue, James; Guentensberger, Todd

2006-01-01

One set of ideas at the core of the National Science Education Standards (NSES) Science and Technology Standards is that of engaging middle school students in activities that help them develop their understandings of technological design. More precisely, students should be able to identify appropriate problems for technological design, design a…

Precision Casting via Advanced Simulation and Manufacturing

NASA Technical Reports Server (NTRS)

1997-01-01

A two-year program was conducted to develop and commercially implement selected casting manufacturing technologies to enable significant reductions in the costs of castings, increase the complexity and dimensional accuracy of castings, and reduce the development times for delivery of high quality castings. The industry-led R&D project was cost shared with NASA's Aerospace Industry Technology Program (AITP). The Rocketdyne Division of Boeing North American, Inc. served as the team lead with participation from Lockheed Martin, Ford Motor Company, Howmet Corporation, PCC Airfoils, General Electric, UES, Inc., University of Alabama, Auburn University, Robinson, Inc., Aracor, and NASA-LeRC. The technical effort was organized into four distinct tasks. The accomplishments reported herein. Task 1.0 developed advanced simulation technology for core molding. Ford headed up this task. On this program, a specialized core machine was designed and built. Task 2.0 focused on intelligent process control for precision core molding. Howmet led this effort. The primary focus of these experimental efforts was to characterize the process parameters that have a strong impact on dimensional control issues of injection molded cores during their fabrication. Task 3.0 developed and applied rapid prototyping to produce near net shape castings. Rocketdyne was responsible for this task. CAD files were generated using reverse engineering, rapid prototype patterns were fabricated using SLS and SLA, and castings produced and evaluated. Task 4.0 was aimed at developing technology transfer. Rocketdyne coordinated this task. Casting related technology, explored and evaluated in the first three tasks of this program, was implemented into manufacturing processes.

Study on micro-bend light transmission performance of novel liquid-core optical fiber

NASA Astrophysics Data System (ADS)

Ma, Junyan; Zhao, Zhimin; Wang, Kaisheng; Guo, Linfeng

2007-01-01

With the increasing development of material technology and electronic integration technology, optical fiber and its using in smart structure have become hot in the field of material research. And liquid-core optical fiber is a special kind of optical fiber, which is made using liquid material as core and polymer material as optical layer and protective covering, and it has the characteristics of large core diameter, high numerical aperture, large-scope and efficient spectrum transmission and long life for using. So the liquid-core optical fiber is very suitable for spectrum cure, ultraviolet solidification, fluorescence detection, criminal investigation and evidence obtainment, etc, and especially as light transfer element in some new structures for the measurement of some signals, such as concentration, voltage, temperature, light intensity and so on. In this paper, the novel liquid-core optical fiber is self-made, and then through the test of its light transmission performance in free state, the relation between axial micro-bend and light-intensity loss are presented. When the liquid-core optical fiber is micro-bent axially, along with the axial displacement's increase, output power of light is reducing increasingly, and approximately has linear relation to micro-displacement in a range. According to the results liquid-core fiber-optic micro-bend sensor can be designed to measure micro-displacement of the tested objects. Experimental data and analysis provide experimental basis for further application of liquid-core optical fiber.

Translational Science by Public Biotechnology Companies in the IPO“Class of 2000”: The Impact of Technological Maturity

PubMed Central

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science. PMID:24358154

Translational science by public biotechnology companies in the IPO "class of 2000": the impact of technological maturity.

PubMed

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science.

Particulate emission abatement for Krakow boiler houses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wysk, R.

1995-12-31

Among the many strategies for improving air quality in Krakow, one possible method is to adapt new and improved emission control technology. This project focuses on such a strategy. In order to reduce dust emissions from coal-fueled boilers, a new device called a Core Separator has been introduced in several boiler house applications. This advanced technology has been successfully demonstrated in Poland and several commercial units are now in operation. Particulate emissions from the Core Separator are typically 3 to 5 times lower than those from the best cyclone collectors. It can easily meet the new standard for dust emissionsmore » which will be in effect in Poland after 1997. The Core Separator is a completely inertial collector and is based on a unique recirculation method. It can effectively remove dust particles below 10 microns in diameter, the so-called PM-10 emissions. Its performance approaches that of fabric filters, but without the attendant cost and maintenance. It is well-suited to the industrial size boilers located in Krakow. Core Separators are now being marketed and sold by EcoInstal, one of the leading environmental firms in Poland, through a cooperative agreement with LSR Technologies.« less

Investigating Pre-Service Science Teachers (PSTs)’ Technological Pedagogical Content Knowledge Through Extended Content Representation (CoRe)

NASA Astrophysics Data System (ADS)

Agustin, R. R.; Liliasari, L.

2017-02-01

The purpose of this study was to attain an insight into pre-service science teachers’ technological pedagogical content knowledge (TPACK) as an integrative competency that is addressed by 21st century skills. The methods used in the study was descriptive. Nineteen pre-service science teachers (PSTs) of an educational university in Indonesia were involved in a semester long school science course. The course mainly develop students’ pedagogical content knowledge (PCK) by utilizing content representation (CoRe) template. Furthermore an infusion of technological knowledge (TK) analysis led to the study of their TPACK by extending the template with a question in line to TK. The extended CoRe and self-reported survey were employed as instruments. The analysis of data used were quantitative and qualitative technique to obtain the insight into PSTs’ PCK and TK. The results shows contrary value of PCK and TK identified by CoRe template to those measured by self-reported survey. However, the PSTs perceive their TPACK much higher, that, is 74.74%. Further investigation regarding PSTs ability to compose lesson plan was recommended for further research to capture more comprehensive insight into PSTs’ TPACK.

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

A critical assessment of the Protoaurignacian lithic technology at Fumane Cave and its implications for the definition of the earliest Aurignacian

PubMed Central

Conard, Nicholas J.; Peresani, Marco

2017-01-01

In the scenario of the spread of the anatomically modern humans (AMHs) into Europe, the techno-complex known as Protoaurignacian is defined by the production of blades and bladelets within a single and continuous stone knapping sequence from the same core as the result of its progressive reduction. However, the growing re-evaluation of some assemblages is revealing that bladelets are frequently obtained from independent reduction sequences, hence discouraging the direct application of the model developed in southwestern France. High-resolution regional signatures are thus needed to reconstruct a more accurate portrait of the AMH colonization dynamic. Northeastern Italy, with the key site of Fumane Cave, is one among the regions of Mediterranean Europe worthy of consideration for reconstructing this colonization process and its cultural dynamics. Within the framework of a critical discussion of the technological definition of the Protoaurignacian and its relationship with contemporaneous industries on a regional and supra-regional scale, we present the results of a detailed analysis of the lithic technology from units A2-A1 based on reduction sequence and attribute analyses. Results show that bladelets are the first goal of production and they do not originate from reduced blade cores but from a broad range of independent and simultaneous core reduction strategies. One implication is that the most commonly used technological trait that is said to define the Protoaurignacian has been over-emphasized and that the Protoaurignacian is technologically consistent across its geographical extent. Additional data based on carinated core technology imply that this techno-complex shares a common technological background with the Early Aurignacian and that no features are restricted to one of the two facies. Furthermore, the major difference between the Protoaurignacian and Early Aurignacian appears to be more typological in nature, with retouched bladelets being less common in the Early Aurignacian. PMID:29216284

A critical assessment of the Protoaurignacian lithic technology at Fumane Cave and its implications for the definition of the earliest Aurignacian.

PubMed

Falcucci, Armando; Conard, Nicholas J; Peresani, Marco

2017-01-01

In the scenario of the spread of the anatomically modern humans (AMHs) into Europe, the techno-complex known as Protoaurignacian is defined by the production of blades and bladelets within a single and continuous stone knapping sequence from the same core as the result of its progressive reduction. However, the growing re-evaluation of some assemblages is revealing that bladelets are frequently obtained from independent reduction sequences, hence discouraging the direct application of the model developed in southwestern France. High-resolution regional signatures are thus needed to reconstruct a more accurate portrait of the AMH colonization dynamic. Northeastern Italy, with the key site of Fumane Cave, is one among the regions of Mediterranean Europe worthy of consideration for reconstructing this colonization process and its cultural dynamics. Within the framework of a critical discussion of the technological definition of the Protoaurignacian and its relationship with contemporaneous industries on a regional and supra-regional scale, we present the results of a detailed analysis of the lithic technology from units A2-A1 based on reduction sequence and attribute analyses. Results show that bladelets are the first goal of production and they do not originate from reduced blade cores but from a broad range of independent and simultaneous core reduction strategies. One implication is that the most commonly used technological trait that is said to define the Protoaurignacian has been over-emphasized and that the Protoaurignacian is technologically consistent across its geographical extent. Additional data based on carinated core technology imply that this techno-complex shares a common technological background with the Early Aurignacian and that no features are restricted to one of the two facies. Furthermore, the major difference between the Protoaurignacian and Early Aurignacian appears to be more typological in nature, with retouched bladelets being less common in the Early Aurignacian.

The Potential of Digital Technologies to Support Literacy Instruction Relevant to the Common Core State Standards

ERIC Educational Resources Information Center

Hutchison, Amy C.; Colwell, Jamie

2014-01-01

Digital tools have the potential to transform instruction and promote literacies outlined in the Common Core State Standards. Empirical research is examined to illustrate this potential in grades 6-12 instruction.

[Ceramic posts].

PubMed

Mainjot, Amélie; Legros, Caroline; Vanheusden, Alain

2006-01-01

As a result of ceramics and all-ceram technologies development esthetic inlay core and abutments flooded the market. Their tooth-colored appearance enhances restoration biomimetism principally on the marginal gingiva area. This article reviews indications and types of cores designed for natural teeth and implants.

Coding for parallel execution of hardware-in-the-loop millimeter-wave scene generation models on multicore SIMD processor architectures

NASA Astrophysics Data System (ADS)

Olson, Richard F.

2013-05-01

Rendering of point scatterer based radar scenes for millimeter wave (mmW) seeker tests in real-time hardware-in-the-loop (HWIL) scene generation requires efficient algorithms and vector-friendly computer architectures for complex signal synthesis. New processor technology from Intel implements an extended 256-bit vector SIMD instruction set (AVX, AVX2) in a multi-core CPU design providing peak execution rates of hundreds of GigaFLOPS (GFLOPS) on one chip. Real world mmW scene generation code can approach peak SIMD execution rates only after careful algorithm and source code design. An effective software design will maintain high computing intensity emphasizing register-to-register SIMD arithmetic operations over data movement between CPU caches or off-chip memories. Engineers at the U.S. Army Aviation and Missile Research, Development and Engineering Center (AMRDEC) applied two basic parallel coding methods to assess new 256-bit SIMD multi-core architectures for mmW scene generation in HWIL. These include use of POSIX threads built on vector library functions and more portable, highlevel parallel code based on compiler technology (e.g. OpenMP pragmas and SIMD autovectorization). Since CPU technology is rapidly advancing toward high processor core counts and TeraFLOPS peak SIMD execution rates, it is imperative that coding methods be identified which produce efficient and maintainable parallel code. This paper describes the algorithms used in point scatterer target model rendering, the parallelization of those algorithms, and the execution performance achieved on an AVX multi-core machine using the two basic parallel coding methods. The paper concludes with estimates for scale-up performance on upcoming multi-core technology.

Proceedings of the Electronics Manufacturing Seminar (14th Annual) Held in China Lake, California on 21-22 February 1990

DTIC Science & Technology

1990-02-01

Aging effects Aging of metalic surfaces Aqueous cleaning Circuit- card assembly Cleanability Closed-loop soldering Conformal coating Defect...5 Standard Electronic Circuit Card Assembly System ....................................... 7 Douglas Green Lockheed-Sanders Corp. Nashua, New...Facility Naval Weapons Center NAVIRSA Detachment 5 NWC TP 7066 EMPF TR 0010 STANDARD ELECTRONIC CIRCUTT CARD ASSEMBLY SYSTEM (SECAS PROJECT) by Douglas

Advanced Mirror & Modelling Technology Development

NASA Technical Reports Server (NTRS)

Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl

2014-01-01

The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.

Computer-assisted design of flux-cored wires

NASA Astrophysics Data System (ADS)

Dubtsov, Yu N.; Zorin, I. V.; Sokolov, G. N.; Antonov, A. A.; Artem'ev, A. A.; Lysak, V. I.

2017-02-01

The algorithm and description of the AlMe-WireLaB software for the computer-assisted design of flux-cored wires are introduced. The software functionality is illustrated with the selection of the components for the flux-cored wire, ensuring the acquisition of the deposited metal of the Fe-Cr-C-Mo-Ni-Ti-B system. It is demonstrated that the developed software enables the technologically reliable flux-cored wire to be designed for surfacing, resulting in a metal of an ordered composition.

Dynamic Eye gaze and its Potential in Virtual Reality Based Applications for Children with Autism Spectrum Disorders.

PubMed

Lahiri, Uttama; Trewyn, Adam; Warren, Zachary; Sarkar, Nilanjan

2011-01-01

Children with Autism Spectrum Disorder are often characterized by deficits in social communication skills. While evidence suggests that intensive individualized interventions can improve aspects of core deficits in Autism Spectrum Disorder, at present numerous potent barriers exist related to accessing and implementing such interventions. Researchers are increasingly employing technology to develop more accessible, quantifiable, and individualized intervention tools to address core vulnerabilities related to autism. The present study describes the development and preliminary application of a Virtual Reality technology aimed at facilitating improvements in social communication skills for adolescents with autism. We present preliminary data from the usability study of this technological application for six adolescents with autism and discuss potential future development and application of adaptive Virtual Reality technology within an intervention framework.

Let's Get Movin'

ERIC Educational Resources Information Center

Kurz, Terri L.; Serrano, Alejandra

2015-01-01

To support students' development of concepts in mathematics, the use of technology is often encouraged (Common Core State Standards Initiative [CCSSI] 2010). Technology can contextualize learning and provide a meaningful setting for mathematical ideas. Most teachers are supportive regarding the use of technology to encourage learning and…

The Translational Genomics Core at Partners Personalized Medicine: Facilitating the Transition of Research towards Personalized Medicine

PubMed Central

Blau, Ashley; Brown, Alison; Mahanta, Lisa; Amr, Sami S.

2016-01-01

The Translational Genomics Core (TGC) at Partners Personalized Medicine (PPM) serves as a fee-for-service core laboratory for Partners Healthcare researchers, providing access to technology platforms and analysis pipelines for genomic, transcriptomic, and epigenomic research projects. The interaction of the TGC with various components of PPM provides it with a unique infrastructure that allows for greater IT and bioinformatics opportunities, such as sample tracking and data analysis. The following article describes some of the unique opportunities available to an academic research core operating within PPM, such the ability to develop analysis pipelines with a dedicated bioinformatics team and maintain a flexible Laboratory Information Management System (LIMS) with the support of an internal IT team, as well as the operational challenges encountered to respond to emerging technologies, diverse investigator needs, and high staff turnover. In addition, the implementation and operational role of the TGC in the Partners Biobank genotyping project of over 25,000 samples is presented as an example of core activities working with other components of PPM. PMID:26927185

The Translational Genomics Core at Partners Personalized Medicine: Facilitating the Transition of Research towards Personalized Medicine.

PubMed

Blau, Ashley; Brown, Alison; Mahanta, Lisa; Amr, Sami S

2016-02-26

The Translational Genomics Core (TGC) at Partners Personalized Medicine (PPM) serves as a fee-for-service core laboratory for Partners Healthcare researchers, providing access to technology platforms and analysis pipelines for genomic, transcriptomic, and epigenomic research projects. The interaction of the TGC with various components of PPM provides it with a unique infrastructure that allows for greater IT and bioinformatics opportunities, such as sample tracking and data analysis. The following article describes some of the unique opportunities available to an academic research core operating within PPM, such the ability to develop analysis pipelines with a dedicated bioinformatics team and maintain a flexible Laboratory Information Management System (LIMS) with the support of an internal IT team, as well as the operational challenges encountered to respond to emerging technologies, diverse investigator needs, and high staff turnover. In addition, the implementation and operational role of the TGC in the Partners Biobank genotyping project of over 25,000 samples is presented as an example of core activities working with other components of PPM.

Virtual Reality Robotic Programming Software in the Technology Classroom

ERIC Educational Resources Information Center

Geissler, Jason; Knott, Patrick J.; Vazquez, Matthew R.; Wright, John R., Jr.

2004-01-01

Robots make a wonderful context for teaching students about many concepts important to technological literacy. They can provide an authentic context and produce high levels of motivation. According to Standards for Technological Literacy: Content for the Study of Technology (STL) (ITEA, 2000, 2002), there are six core concepts that should be…

Marine sedimentary coring and high-quality, multi-proxy records in the high-latitude North Pacific: a synthesis of paleoceanographic cruise and research effort

NASA Astrophysics Data System (ADS)

Borreggine, M. J.; Myhre, S. E.; Smith-Mislan, A.; Davis, C. V.; Deutsch, C.

2016-12-01

We assessed sedimentary coring efforts, data acquisition and publications from the subpolar North Pacific and marginal seas from 1951-2015. We found a total of 1,249 sediment cores collected by American, French, Japanese and Russian research vessels across the Subarctic Pacific (639 cores), Alaskan Gyre (8 cores), Sea of Okhotsk (270 cores), Bering Sea (120 cores), and the Sea of Japan (212 cores). Of these, 27% are investigated in peer-reviewed publications; this fraction varies from the Subarctic Pacific (18%), Alaskan Gyre (100%), Sea of Okhotsk (33%), Bering Sea (57%), and the Sea of Japan (25%). We assess the biological, geochemical, isotopic, and stratigraphic lines of evidence available for these cores, alongside coring technology, location, depth, cruise and vessel metadata. Coring effort peaked in 1996, 2009, and 2010 where 86, 90, and 67 cores, respectively, were recovered in the five regions collectively. Piston cores are the most common (347 cores) of the 24 different coring technologies used in the last 64 years. Published sedimentation rates range across the Subarctic Pacific (0.132-208 cm/ka), Alaskan Gyre (9-10,000 cm/ka), Sea of Okhotsk (0.7-115.5 cm/ka), Bering Sea (3-250 cm/ka), and the Sea of Japan (0.5-25 cm/ka), with the highest rates in the Alaskan Gyre. Age model development has transitioned from singular techniques to multiproxy approaches. Recent chronologies are built using a mix of isotope stratigraphy, radiocarbon dating, magnetostratigraphy, biostratigraphy, tephrochronology, % opal, color, and lithophysical proxies. Out of 275 published chronologies for the North Pacific, 132 (48%) are built with radiocarbon dating. Sedimentary data in the North Pacific includes biological, geochemical, isotopic, and stratigraphic analyses, and we document all proxy evidence to-date across all cores assessed. This database of coring and publication provides a unique resource and comprehensive assessment to the paleoceanographic community, can be used to identify strengths and weaknesses in North Pacific paleoceanography, and will be made publicly available. Additionally, the database is used to recreate past sea ice, temperature, and oxygen conditions in two additional submissions at the 2016 AGU Fall Meeting.

Bitsy Thinks Big

NASA Technical Reports Server (NTRS)

2001-01-01

AeroAstro, of Herndon, Virginia, developed a nanospacecraft core module capable of developing recyclable spacecraft designs using standard interfaces. From this core module, known as the Bitsy(TM) kernel, custom spacecraft are able to connect mission-specific instruments and subsystems for variation in mission usage. The nanospacecraft core module may be used in conjunction with an existing microsatellite bus or customized to meet specific requirements. Building on this premise, AeroAstro has developed a line of satellite communications equipment, sun sensors, and Lithium-Ion batteries which are all incorporated in its complete line of mission-specific nanospacecraft. The Bitsy technology is also a key component in AeroAstro#s satellite inspection products and orbital transfer services. In the future, AeroAstro plans to market an even less expensive version of the Bitsy technology. The plan, which is targeted to universities, markets a sort of "satellite in a kit," for less than $1 million. This technology would allow universities to build true space hardware for a fraction of the cost of launching a regular satellite.

MeSMarT - Measurements of Shipping Emissions in the Marine Troposphere

NASA Astrophysics Data System (ADS)

Kattner, Lisa; Mathieu-Üffing, Barbara; Chirkov, Maksym; Burrows, John; Matthias, Volker; Richter, Andreas; Schmolke, Stefan; Theobald, Norbert; Weigelt-Krenz, Sieglinde; Wittrock, Folkard

2013-04-01

A new project called MeSMarT (Measurements of shipping emissions in the marine troposphere) to estimate the influence of ship emissions on the chemistry of the atmospheric boundary layer over the North Sea has been established in cooperation with the German Bundesamt für Seeschifffahrt und Hydrographie (Federal Maritime and Hydrographic Agency). Over the last years discussions about ship emissions have increased and grown in importance due to the increase of commercial shipping as well as studies about their dangerous health effects. While industrial and traffic air pollution from ashore is decreasing because of technological improvements and stronger political regulations the impact of ship emissions becomes more relevant, especially in coastal areas and harbor cities. The establishment of a Sulfur Emission Controlled Area (SECA) for the North Sea and the Baltic Sea has been a first step to control and reduce ship emissions by consecutively regulating the sulfur content of fuels. The project MeSMarT aims to monitor background concentration as well as elevated signals of gases and particles related to ship emissions with various physical and chemical methods to cover a wide range of relevant pollutants and their spatial and seasonal distribution. SO2, NO2, NO, CO2 and O3 are measured with in situ techniques, SO2 and NO2 as well by remote sensing applying the MAXDOAS-technique. The data will also be compared with satellite measurements and passive sampling in order to find a method to observe the long-term effect of regulations like SECA. High volume filter samples will be taken and analyzed especially for sulfate, nitrate, organics and elemental composition to investigate possible sources, sinks and conversion of ship emission derived compounds. Measurements and sampling take place during ship campaigns primarily in the North Sea and will be complemented with stationary measurements located on a coastal site close to the main shipping routes through the German Bight. Modeling of pollutants transport and chemical transformation taking into account the measured data will also be included in the MeSMarT project to improve the understanding of the relevance of ship emissions in coastal environments. Here we present a project outlook and first results of a campaign in late 2012 using both in situ and remote sensing techniques.

Recent Developments and Adaptations in Diamond Wireline Core Drilling Technology

NASA Astrophysics Data System (ADS)

Thomas, D. M.; Nielson, D. L.; Howell, B. B.; Pardey, M.

2001-05-01

Scientific drilling using diamond wireline technology is presently undergoing a significant expansion and extension of activities that has allowed us to recover geologic samples that have heretofore been technically or financially unattainable. Under the direction and management of DOSECC, a high-capacity hybrid core drilling system was designed and fabricated for the Hawaii Scientific Drilling Project (HSDP) in 1998. This system, the DOSECC Hybrid Coring System (DHCS), has the capacity to recover H-sized core from depths of more than 6 km. In 1999, the DHCS completed the first phase of the HSDP to a depth of 3100 m at a substantially lower cost per foot than any previous scientific borehole to comparable depths and, in the process, established a new depth record for recovery of H-sized wireline core. This system has been offered for use in the Unzen Scientific Drilling Project, the Chicxulub (impact crater) Scientific Drilling Project, and the Geysers Deep Geothermal Reservoir Project. More recently, DOSECC has developed a smaller barge-mounted wireline core drilling system, the GLAD800, that is capable of recovering P-sized sediment core to depths of up to 800 m. The GLAD800 has been successfully deployed on Great Salt Lake and Bear Lake in Utah and is presently being mobilized to Lake Titicaca in South America for an extensive core recovery effort there. The coring capabilities of the GLAD800 system will be available to the global lakes drilling community for acquisition of sediment cores from many of the world's deep lakes for use in calibrating and refining global climate models. Presently under development by DOSECC is a heave-compensation system that will allow us to expand the capabilities of the moderate depth coring system to allow us to collect sediment and bottom core from the shallow marine environment. The design and capabilities of these coring systems will be presented along with a discussion of their potential applications for addressing a range of earth sciences questions.

Implementation of Quality Management in Core Service Laboratories

PubMed Central

Creavalle, T.; Haque, K.; Raley, C.; Subleski, M.; Smith, M.W.; Hicks, B.

2010-01-01

CF-28 The Genetics and Genomics group of the Advanced Technology Program of SAIC-Frederick exists to bring innovative genomic expertise, tools and analysis to NCI and the scientific community. The Sequencing Facility (SF) provides next generation short read (Illumina) sequencing capacity to investigators using a streamlined production approach. The Laboratory of Molecular Technology (LMT) offers a wide range of genomics core services including microarray expression analysis, miRNA analysis, array comparative genome hybridization, long read (Roche) next generation sequencing, quantitative real time PCR, transgenic genotyping, Sanger sequencing, and clinical mutation detection services to investigators from across the NIH. As the technology supporting this genomic research becomes more complex, the need for basic quality processes within all aspects of the core service groups becomes critical. The Quality Management group works alongside members of these labs to establish or improve processes supporting operations control (equipment, reagent and materials management), process improvement (reengineering/optimization, automation, acceptance criteria for new technologies and tech transfer), and quality assurance and customer support (controlled documentation/SOPs, training, service deficiencies and continual improvement efforts). Implementation and expansion of quality programs within unregulated environments demonstrates SAIC-Frederick's dedication to providing the highest quality products and services to the NIH community.

Safety and core design of large liquid-metal cooled fast breeder reactors

NASA Astrophysics Data System (ADS)

Qvist, Staffan Alexander

In light of the scientific evidence for changes in the climate caused by greenhouse-gas emissions from human activities, the world is in ever more desperate need of new, inexhaustible, safe and clean primary energy sources. A viable solution to this problem is the widespread adoption of nuclear breeder reactor technology. Innovative breeder reactor concepts using liquid-metal coolants such as sodium or lead will be able to utilize the waste produced by the current light water reactor fuel cycle to power the entire world for several centuries to come. Breed & burn (B&B) type fast reactor cores can unlock the energy potential of readily available fertile material such as depleted uranium without the need for chemical reprocessing. Using B&B technology, nuclear waste generation, uranium mining needs and proliferation concerns can be greatly reduced, and after a transitional period, enrichment facilities may no longer be needed. In this dissertation, new passively operating safety systems for fast reactors cores are presented. New analysis and optimization methods for B&B core design have been developed, along with a comprehensive computer code that couples neutronics, thermal-hydraulics and structural mechanics and enables a completely automated and optimized fast reactor core design process. In addition, an experiment that expands the knowledge-base of corrosion issues of lead-based coolants in nuclear reactors was designed and built. The motivation behind the work presented in this thesis is to help facilitate the widespread adoption of safe and efficient fast reactor technology.

Technology Education--A Broader Approach.

ERIC Educational Resources Information Center

Petersen, M. Larry

Technology education is now an integral part of the curriculum in middle school and high school programs of the Logan (Utah) City Schools. The five major vertical curriculum cores required of all ninth-grade students are human resource management, free enterprise applications, career insights and opportunities, technology trends, and counseling…

Technology Integration and Innovation during Reflective Teaching

ERIC Educational Resources Information Center

Baporikar, Neeta

2016-01-01

With emerging innovations, the use of technology tools to make learning process effective is foreseeable. Hence, appropriate incorporation of technology can make a valuable contribution to the learning and undoubtedly reflection is core to learning. With today's twenty-first century learners, it is important that educators advocate integrating…

[OVERWEIGHT AND OBESITY IN CHILDREN AND ADOLESCENTS IN FULL TIME SCHOOLS MORELOS, MÉXICO].

PubMed

González Rosendo, Guillermina; Villanueva Sánchez, Javier; Alcantar Rodríguez, Victor Eduardo; Quintero Gutiérrez, Adrián Guillermo

2015-12-01

in Mexico, although there are low intakes of some nutrients; there are higher total energy, fat and sodium and common inadequate physical activity in schools, which originates the presence of overweight and obesity. Objetive: the aim of this study was to identify the prevalence of overweight and obesity in school children full- time state of Morelos (Mexico). a cross sectional study in 30 966 students 3-15 years attending 186 schools. The nutritional status was obtained through the Body Mass Index, considering the age and sex; weight was measured with SECA 813 scales and height with stadiometer SECA 213; international benchmarks were used. 36 482 boys and girls censused, it's measured at 30 966 (84.9%) attended the day of visit. The overall prevalence of underweight was close to 8%, and the combined prevalence of overweight and obesity exceeded 25%. Were higher prevalences of underweight and obesity in men. one in 12 children are underweight; one in four, overweight and one in nine obese. The male population is more vulnerable to suffer consequences for nutritional deficiencies and excesses. Specific studies are needed to differentiate and address obesity primary type and associated risks to define future actions. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

The hyacinth project

NASA Astrophysics Data System (ADS)

Francis, T.

2003-04-01

HYACINTH is the acronym for "Development of HYACE tools in new tests on Hydrates". The project is being carried out by a consortium of six companies and academic institutions from Germany, The Netherlands and the United Kingdom. It is a European Framework Five project whose objective is to bring the pressure corers developed in the earlier HYACE project, together with new core handling technology developed in the HYACINTH project, to the operational stage. Our philosophy is that if all one does with a pressure core is to bleed off the gas it contains, a major scientific opportunity has been missed. The current system enables pressure cores to be acquired, then transferred, without loss of pressure, into laboratory chambers so that they can be geophysically logged. The suite of equipment - HYACE Rotary Corer (HRC), Fugro Pressure Corer (FPC), Shear Transfer Chamber (STC), Logging Chamber (LC), Storage Chamber (SC) and Vertical Multi-Sensor Core Logger (V-MSCL) - will be briefly described. Other developments currently in progress to extend the capabilities of the system will be summarised: - to allow electrical resistivity logging of the pressure cores - to enable pressurised sub-samples to be taken from the cores - to facilitate microbiological experiments on pressurised sub-samples The first scientific results obtained with the HYACE/HYACINTH technology were achieved on ODP Leg 204 and are the subject of another talk at this meeting.

Making STEM Real

ERIC Educational Resources Information Center

Hoachlander, Gary; Yanofsky, Dave

2011-01-01

In too many schools, science and mathematics are taught separately with little or no attention to technology and engineering. Also, science and mathematics tend to function in isolation from other core subjects. In California, Linked Learning: Pathways to College and Career Success connects core academics to challenging professional and technical…

LC21-Hopes and Cautions for the Library of Congress; The NSF National Science, Mathematics, Engineering, and Technology Education Digital Library (NSDL) Program: A Progress Report; A Grammar of Dublin Core; Measuring the Impact of an Electronic Journal Collection on Library Costs: A Framework and Preliminary Observations; Emulation As a Digital Preservation Strategy.

ERIC Educational Resources Information Center

O'Donnell, James J.; Zia, Lee L.; Baker, Thomas; Montgomery, Carol Hansen; Granger, Stewart

2000-01-01

Includes five articles: (1) discusses Library of Congress efforts to include digital materials; (2) describes the National Science Foundation (NSF) digital library program to improve science, math, engineering, and technology education; (3) explains Dublin Core grammar; (4) measures the impact of electronic journals on library costs; and (5)…

Digital Preservation and Deep Infrastructure; Dublin Core Metadata Initiative Progress Report and Workplan for 2002; Video Gaming, Education and Digital Learning Technologies: Relevance and Opportunities; Digital Collections of Real World Objects; The MusArt Music-Retrieval System: An Overview; eML: Taking Mississippi Libraries into the 21st Century.

ERIC Educational Resources Information Center

Granger, Stewart; Dekkers, Makx; Weibel, Stuart L.; Kirriemuir, John; Lensch, Hendrik P. A.; Goesele, Michael; Seidel, Hans-Peter; Birmingham, William; Pardo, Bryan; Meek, Colin; Shifrin, Jonah; Goodvin, Renee; Lippy, Brooke

2002-01-01

One opinion piece and five articles in this issue discuss: digital preservation infrastructure; accomplishments and changes in the Dublin Core Metadata Initiative in 2001 and plans for 2002; video gaming and how it relates to digital libraries and learning technologies; overview of a music retrieval system; and the online version of the…

Nuclear Thermal Propulsion: A Joint NASA/DOE/DOD Workshop

NASA Technical Reports Server (NTRS)

Clark, John S. (Editor)

1991-01-01

Papers presented at the joint NASA/DOE/DOD workshop on nuclear thermal propulsion are compiled. The following subject areas are covered: nuclear thermal propulsion programs; Rover/NERVA and NERVA systems; Low Pressure Nuclear Thermal Rocket (LPNTR); particle bed reactor nuclear rocket; hybrid propulsion systems; wire core reactor; pellet bed reactor; foil reactor; Droplet Core Nuclear Rocket (DCNR); open cycle gas core nuclear rockets; vapor core propulsion reactors; nuclear light bulb; Nuclear rocket using Indigenous Martian Fuel (NIMF); mission analysis; propulsion and reactor technology; development plans; and safety issues.

Stack-and-Draw Manufacture Process of a Seven-Core Optical Fiber for Fluorescence Measurements

NASA Astrophysics Data System (ADS)

Samir, Ahmed; Batagelj, Bostjan

2018-01-01

Multi-core, optical-fiber technology is expected to be used in telecommunications and sensory systems in a relatively short amount of time. However, a successful transition from research laboratories to industry applications will only be possible with an optimized design and manufacturing process. The fabrication process is an important aspect in designing and developing new multi-applicable, multi-core fibers, where the best candidate is a seven-core fiber. Here, the basics for designing and manufacturing a single-mode, seven-core fiber using the stack-and-draw process is described for the example of a fluorescence sensory system.

Mr. Vetro: A Collective Simulation for Teaching Health Science

ERIC Educational Resources Information Center

Ioannidou, Andri; Repenning, Alexander; Webb, David; Keyser, Diane; Luhn, Lisa; Daetwyler, Christof

2010-01-01

Why has technology become prevalent in science education without fundamentally improving test scores or student attitudes? We claim that the core of the problem is "how" technology is being used. Technologies such as simulations are currently not used to their full potential. For instance, physiology simulations often follow textbooks by…

Advanced Education and Technology Business Plan, 2009-12

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2009

2009-01-01

The Ministry of Advanced Education and Technology consists of the following entities for budget purposes: Department of Advanced Education and Technology, the Access to the Future Fund, Alberta Enterprise Corporation, Alberta Research Council Inc., and iCORE Inc. Achieving the Ministry's goals involves the work and coordination of many…

Information Technology in Sport Management Curricula

ERIC Educational Resources Information Center

Barneva, Reneta P.; Hite, Penny D.

2017-01-01

We study the breadth of inclusion of information technology in sport management (SM) programs, surveying program sponsoring colleges and universities within a prominent state-university system. Our results indicate a very low number of SM programs require any type of information technology courses as part of their core requirements. In fact, only…

Validating a Technology Enhanced Student-Centered Learning Model

ERIC Educational Resources Information Center

Kang, Myunghee; Hahn, Jungsun; Chung, Warren

2015-01-01

The Technology Enhanced Student Centered Learning (TESCL) Model in this study presents the core factors that ensure the quality of learning in a technology-supported environment. Although the model was conceptually constructed using a student-centered learning framework and drawing upon previous studies, it should be validated through real-world…

The Influence of Teacher Professional Development on Technology Integration at the Secondary Level

ERIC Educational Resources Information Center

Baldwin, Kristi Lynn

2011-01-01

Traditionally, professional development for technology integration has been insufficient or ineffective for supporting changes in classroom practice. This study examined the professional development experiences of secondary school teachers in South Dakota related to educational technology in order to determine core content area teachers' perceived…

75 FR 5796 - Danaher Corporation and MDS, Inc.; Analysis of Agreement Containing Consent Orders to Aid Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-04

..., Ontario, MDS is a life sciences company that operates three core businesses, MDS Analytical Technologies... life sciences company that manufactures and sells scientific research equipment that it distributes... devices and associated reagent products, to Life Technologies Corp. (``Life Technologies'') within 10 days...

Incorporating Disciplinary Literacy in Technology and Engineering Education

ERIC Educational Resources Information Center

Loveland, Thomas

2014-01-01

This article presents an overview of how to relate reading to a content area, specifically technology education. The author notes that, with the new focus on Common Core English Language Arts State Standards and state-developed standards, technology and engineering teachers should include disciplinary literacy in their curriculum. Academic…

Cases on Technology Integration in Mathematics Education

ERIC Educational Resources Information Center

Polly, Drew, Ed.

2015-01-01

Common Core education standards establish a clear set of specific ideas and skills that all students should be able to comprehend at each grade level. In an effort to meet these standards, educators are turning to technology for improved learning outcomes. "Cases on Technology Integration in Mathematics Education" provides a compilation…

U.S. National Institutes of Health core consolidation-investing in greater efficiency.

PubMed

Chang, Michael C; Birken, Steven; Grieder, Franziska; Anderson, James

2015-04-01

The U.S. National Institutes of Health (NIH) invests substantial resources in core research facilities (cores) that support research by providing advanced technologies and scientific and technical expertise as a shared resource. In 2010, the NIH issued an initiative to consolidate multiple core facilities into a single, more efficient core. Twenty-six institutions were awarded supplements to consolidate a number of similar core facilities. Although this approach may not work for all core settings, this effort resulted in consolidated cores that were more efficient and of greater benefit to investigators. The improvements in core operations resulted in both increased services and more core users through installation of advanced instrumentation, access to higher levels of management expertise; integration of information management and data systems; and consolidation of billing; purchasing, scheduling, and tracking services. Cost recovery to support core operations also benefitted from the consolidation effort, in some cases severalfold. In conclusion, this program of core consolidation resulted in improvements in the effective operation of core facilities, benefiting both investigators and their supporting institutions.

Space transportation propulsion USSR launcher technology, 1990

NASA Technical Reports Server (NTRS)

1991-01-01

Space transportation propulsion U.S.S.R. launcher technology is discussed. The following subject areas are covered: Energia background (launch vehicle summary, Soviet launcher family) and Energia propulsion characteristics (booster propulsion, core propulsion, and growth capability).

Core Skills Assessment to Improve Mathematical Competency

ERIC Educational Resources Information Center

Carr, Michael; Bowe, Brian; Ní Fhloinn, Eabhnat

2013-01-01

Many engineering undergraduates begin third-level education with significant deficiencies in their core mathematical skills. Every year, in the Dublin Institute of Technology, a diagnostic test is given to incoming first-year students, consistently revealing problems in basic mathematics. It is difficult to motivate students to address these…

Ultrasound as an intervention technology for the sanitation of lettuce harvesting knife

USDA-ARS?s Scientific Manuscript database

Lettuce field-coring and trimming practices are recent industry developments designed to improve fresh-cut processing yield and reduce shipping and waste disposal costs. Studies showed that the harvesting/coring knives used could be potentially contaminated with pathogens by contact with contaminat...

A study of bending effect on the femtosecond-pulse inscribed fiber Bragg gratings in a dual-core fiber

NASA Astrophysics Data System (ADS)

Yakushin, Sergey S.; Wolf, Alexey A.; Dostovalov, Alexandr V.; Skvortsov, Mikhail I.; Wabnitz, Stefan; Babin, Sergey A.

2018-07-01

Fiber Bragg gratings with different reflection wavelengths have been inscribed in different cores of a dual-core fiber section. The effect of fiber bending on the FBG reflection spectra has been studied. Various interrogation schemes are presented, including a single-end scheme based on a cross-talk between the cores that uses only standard optical components. Simultaneous interrogation of the FBGs in both cores allows to achieve a bending sensitivity of 12.8 pm/m-1, being free of temperature and strain influence. The technology enables the development of real-time bending sensors with high spatial resolution based on series of FBGs with different wavelength inscribed along the multi-core fiber.

[Professionalism: Values and competences in specialized medical training].

PubMed

Giménez, N; Alcaraz, J; Gavagnach, M; Kazan, R; Arévalo, A; Rodríguez-Carballeira, M

To determine the perception of healthcare professionals (tutors, residents and teaching collaborators) involved in specialist medical training on the core values and skills to develop their tasks. A tailor-made questionnaire aimed at healthcare professionals in 9health care centres and a referral hospital. Questionnaire: 4 sections and 51 variables (scale 1-10). A total of 287 professionals participated, which included 97% tutors (n=59), 38% residents (n=61), and 56% others (97 teaching collaborators and 70 not associated with teaching). The alfa Cronbach coefficient was 0.945. Best rated values were work compliance (8.7 points), ethics in professional practice (8.6 points), and respect for their team (8.3 points). The best rated competence was communication with patients and families (8.1 points), followed by self-motivating leadership (7.9 points), and the practical application of medical and healthcare theoretical knowledge (7.8 points). The values received, on average, 0.7 points above competences (95% CI: 0.5-0.9). There were no differences between tutors and residents, although differences were found between doctors and nurses, and between males and females. Most of the professionals (tutors, residents, and teaching collaborators) share the same perception of the values and competencies that influence their professional development. This perception was influenced by the professional category and gender, but not age or working in a hospital or primary health care. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Hydrogel Encapsulation Facilitates Rapid-Cooling Cryopreservation of Stem Cell-Laden Core-Shell Microcapsules as Cell-Biomaterial Constructs.

PubMed

Zhao, Gang; Liu, Xiaoli; Zhu, Kaixuan; He, Xiaoming

2017-12-01

Core-shell structured stem cell microencapsulation in hydrogel has wide applications in tissue engineering, regenerative medicine, and cell-based therapies because it offers an ideal immunoisolative microenvironment for cell delivery and 3D culture. Long-term storage of such microcapsules as cell-biomaterial constructs by cryopreservation is an enabling technology for their wide distribution and ready availability for clinical transplantation. However, most of the existing studies focus on cryopreservation of single cells or cells in microcapsules without a core-shell structure (i.e., hydrogel beads). The goal of this study is to achieve cryopreservation of stem cells encapsulated in core-shell microcapsules as cell-biomaterial constructs or biocomposites. To this end, a capillary microfluidics-based core-shell alginate hydrogel encapsulation technology is developed to produce porcine adipose-derived stem cell-laden microcapsules for vitreous cryopreservation with very low concentration (2 mol L -1 ) of cell membrane penetrating cryoprotective agents (CPAs) by suppressing ice formation. This may provide a low-CPA and cost-effective approach for vitreous cryopreservation of "ready-to-use" stem cell-biomaterial constructs, facilitating their off-the-shelf availability and widespread applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

JPRS Report, Science & Technology, China: Energy

DTIC Science & Technology

1988-06-29

capacity. There are currently two types of HTGR reactor designs: the particle-bed core , which uses spherical fuel elements, and the rod type core , in...and trial operating experience with the HTGR reactor. Its main design features are as follows. 1. A particle-bed core , continuous fueling and...Favorable for Development of Small-Scale HTGR (Xu Jiming; HE DONGLI GONGCHENG, Feb 88) 47 ERRATUM: In JPRS-CEN-88-003 of 25 April 1988 in article

CT Scanning and Geophysical Measurements of the Marcellus Formation from the Tippens 6HS Well

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crandall, Dustin; Paronish, Thomas; Brown, Sarah

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the Marcellus Shale from a vertical well drilled in Eastern Ohio. The core is from the Tippens 6HS Well in Monroe County, Ohio and is comprised primarily of the Marcellus Shale from depths of 5550 to 5663 ft.

Performance measurements of a pilot superconducting solenoid model core for a wind tunnel magnetic suspension and balance system

NASA Technical Reports Server (NTRS)

Goodyer, M. J.; Britcher, C. P.

1983-01-01

The results of experimental demonstrations of a superconducting solenoid model core in the Southampton University Magnetic Suspension and Balance System are detailed. Technology and techniques relevant to large-scale wind tunnel MSBSs comprise the long term goals. The magnetic moment of solenoids, difficulties peculiar to superconducting solenoid cores, lift force and pitching moment, dynamic lift calibration, and helium boil-off measurements are discussed.

Electrically Heated Testing of the Kilowatt Reactor Using Stirling Technology (KRUSTY) Experiment Using a Depleted Uranium Core

NASA Technical Reports Server (NTRS)

Briggs, Maxwell H.; Gibson, Marc A.; Sanzi, James

2017-01-01

The Kilopower project aims to develop and demonstrate scalable fission-based power technology for systems capable of delivering 110 kW of electric power with a specific power ranging from 2.5 - 6.5 Wkg. This technology could enable high power science missions or could be used to provide surface power for manned missions to the Moon or Mars. NASA has partnered with the Department of Energys National Nuclear Security Administration, Los Alamos National Labs, and Y-12 National Security Complex to develop and test a prototypic reactor and power system using existing facilities and infrastructure. This technology demonstration, referred to as the Kilowatt Reactor Using Stirling TechnologY (KRUSTY), will undergo nuclear ground testing in the summer of 2017 at the Nevada Test Site. The 1 kWe variation of the Kilopower system was chosen for the KRUSTY demonstration. The concept for the 1 kWe flight system consist of a 4 kWt highly enriched Uranium-Molybdenum reactor operating at 800 degrees Celsius coupled to sodium heat pipes. The heat pipes deliver heat to the hot ends of eight 125 W Stirling convertors producing a net electrical output of 1 kW. Waste heat is rejected using titanium-water heat pipes coupled to carbon composite radiator panels. The KRUSTY test, based on this design, uses a prototypic highly enriched uranium-molybdenum core coupled to prototypic sodium heat pipes. The heat pipes transfer heat to two Advanced Stirling Convertors (ASC-E2s) and six thermal simulators, which simulate the thermal draw of full scale power conversion units. Thermal simulators and Stirling engines are gas cooled. The most recent project milestone was the completion of non-nuclear system level testing using an electrically heated depleted uranium (non-fissioning) reactor core simulator. System level testing at the Glenn Research Center (GRC) has validated performance predictions and has demonstrated system level operation and control in a test configuration that replicates the one to be used at the Device Assembly Facility (DAF) at the Nevada National Security Site. Fabrication, assembly, and testing of the depleted uranium core has allowed for higher fidelity system level testing at GRC, and has validated the fabrication methods to be used on the highly enriched uranium core that will supply heat for the DAF KRUSTY demonstration.

FHR Process Instruments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holcomb, David Eugene

2015-01-01

Fluoride salt-cooled High temperature Reactors (FHRs) are entering into early phase engineering development. Initial candidate technologies have been identified to measure all of the required process variables. The purpose of this paper is to describe the proposed measurement techniques in sufficient detail to enable assessment of the proposed instrumentation suite and to support development of the component technologies. This paper builds upon the instrumentation chapter of the recently published FHR technology development roadmap. Locating instruments outside of the intense core radiation and high-temperature fluoride salt environment significantly decreases their environmental tolerance requirements. Under operating conditions, FHR primary coolant salt ismore » a transparent, low-vapor-pressure liquid. Consequently, FHRs can employ standoff optical measurements from above the salt pool to assess in-vessel conditions. For example, the core outlet temperature can be measured by observing the fuel s blackbody emission. Similarly, the intensity of the core s Cerenkov glow indicates the fission power level. Short-lived activation of the primary coolant provides another means for standoff measurements of process variables. The primary coolant flow and neutron flux can be measured using gamma spectroscopy along the primary coolant piping. FHR operation entails a number of process measurements. Reactor thermal power and core reactivity are the most significant variables for process control. Thermal power can be determined by measuring the primary coolant mass flow rate and temperature rise across the core. The leading candidate technologies for primary coolant temperature measurement are Au-Pt thermocouples and Johnson noise thermometry. Clamp-on ultrasonic flow measurement, that includes high-temperature tolerant standoffs, is a potential coolant flow measurement technique. Also, the salt redox condition will be monitored as an indicator of its corrosiveness. Both electrochemical techniques and optical spectroscopy are candidate fluoride salt redox measurement methods. Coolant level measurement can be performed using radar-level gauges located in standpipes above the reactor vessel. While substantial technical development remains for most of the instruments, industrially compatible instruments based upon proven technology can be reasonably extrapolated from the current state of the art.« less

Condition Based Maintenance Technology Impact Study: Assessment Methods, Study Design and Interim Results

DTIC Science & Technology

2014-07-01

Unified Theory of Acceptance and Use of Technology, Structuration Model of Technology, UNCLASSIFIED DSTO-TR-2992 UNCLASSIFIED 5 Adaptive...Structuration Theory , Model of Mutual Adaptation, Model of Technology Appropriation, Diffusion/Implementation Model, and Tri-core Model, among others [11...simulation gaming essay/scenario writing genius forecasting role play/acting backcasting swot brainstorming relevance tree/logic chart scenario workshop

Effective Integration of Technology and Instruction. Q&A with Michael Jay. REL Mid-Atlantic Educator Effectiveness Webinar Series

ERIC Educational Resources Information Center

Regional Educational Laboratory Mid-Atlantic, 2015

2015-01-01

In this webinar, long-time educator and developer of education technology Michael Jay discussed the importance of using technology to support learning and gave examples of how teachers can integrate technology into their instruction based on the Common Core State Standards and the Next Generation Science Standards. The PowerPoint presentation and…

Caring communications: how technology enhances interpersonal relations, Part II.

PubMed

Simpson, Roy L

2008-01-01

Part I of this 2-part series about technology's role in interpersonal communications examined how humans interact; proposed a caring theory of communication, collaboration, and conflict resolution; and delineated ways that technology--in general--supports this carative model of interpersonal relations. Part II will examine the barriers to adoption of carative technologies, describe the core capabilities required to overcome them, and discuss specific technologies that can support carative interpersonal relationships.

Comparison of the fractional power motor with cores made of various magnetic materials

NASA Astrophysics Data System (ADS)

Gmyrek, Zbigniew; Lefik, Marcin; Cavagnino, Andrea; Ferraris, Luca

2017-12-01

The optimization of the motor cores, coupled with new core shapes as well as powering the motor at high frequency are the primary reasons for the use of new materials. The utilization of new materials, like SMC (soft magnetic composite), reduce the core loss and/or provide quasi-isotropic core's properties in any magnetization direction. Moreover, the use of SMC materials allows for avoiding degradation of the material portions, resulting from punching process, thereby preventing the deterioration of operating parameters of the motor. The authors examine the impact of technological parameters on the properties of a new type of SMC material and analyze the possibility of its use as the core of the fractional power motor. The result of the work is an indication of the shape of the rotor core made of a new SMC material to achieve operational parameters similar to those that have a motor with a core made of laminations.

Democratizing Access to Core Mathematics across Grades 9-12

ERIC Educational Resources Information Center

Hegedus, Stephen; Dalton, Sara; Brookstein, Arden; Tapper, John; Heller, Eric

2011-01-01

The authors' proposed work builds upon 12+ years of research collectively known as the "SimCalc Projects." SimCalc Connected MathWorlds (SCM) combines two innovative technological ingredients to address core mathematical ideas in deep and sustainable ways for mathematics learners. Software that addresses content issues through dynamic…

Ultrasonic Drilling and Coring

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph

1998-01-01

A novel drilling and coring device, driven by a combination, of sonic and ultrasonic vibration, was developed. The device is applicable to soft and hard objects using low axial load and potentially operational under extreme conditions. The device has numerous potential planetary applications. Significant potential for commercialization in construction, demining, drilling and medical technologies.

A novel enzyme-based acidizing system: Matrix acidizing and drilling fluid damage removal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, R.E.; McKay, D.M.; Moses, V.

1995-12-31

A novel acidizing process is used to increase the permeability of carbonate rock cores in the laboratory and to remove drilling fluid damage from cores and wafers. Field results show the benefits of the technology as applied both to injector and producer wells.

Core Ideas of Engineering and Technology

ERIC Educational Resources Information Center

Sneider, Cary

2012-01-01

Last month, Rodger Bybee's article, "Scientific and Engineering Practices in K-12 Classrooms," provided an overview of Chapter 3 in "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011). Chapter 3 describes the practices of science and engineering that students are expected to develop during 13 years…

Visible-Near Infrared Point Spectrometry of Drill Core Samples from Río Tinto, Spain: Results from the 2005 Mars Astrobiology Research and Technology Experiment (MARTE) Drilling Exercise

NASA Astrophysics Data System (ADS)

Sutter, Brad; Brown, Adrian J.; Stoker, Carol R.

2008-10-01

Sampling of subsurface rock may be required to detect evidence of past biological activity on Mars. The Mars Astrobiology Research and Technology Experiment (MARTE) utilized the Río Tinto region, Spain, as a Mars analog site to test dry drilling technologies specific to Mars that retrieve subsurface rock for biological analysis. This work examines the usefulness of visible-near infrared (VNIR) (450-1000 nm) point spectrometry to characterize ferric iron minerals in core material retrieved during a simulated Mars drilling mission. VNIR spectrometry can indicate the presence of aqueously precipitated ferric iron minerals and, thus, determine whether biological analysis of retrieved rock is warranted. Core spectra obtained during the mission with T1 (893-897 nm) and T2 (644-652 nm) features indicate goethite-dominated samples, while relatively lower wavelength T1 (832-880 nm) features indicate hematite. Hematite/goethite molar ratios varied from 0 to 1.4, and within the 880-898 nm range, T1 features were used to estimate hematite/goethite molar ratios. Post-mission X-ray analysis detected phyllosilicates, which indicates that examining beyond the VNIR (e.g., shortwave infrared, 1000-2500 nm) will enhance the detection of other minerals formed by aqueous processes. Despite the limited spectral range of VNIR point spectrometry utilized in the MARTE Mars drilling simulation project, ferric iron minerals could be identified in retrieved core material, and their distribution served to direct core subsampling for biological analysis.

Visible-near infrared point spectrometry of drill core samples from Río Tinto, Spain: results from the 2005 Mars Astrobiology Research and Technology Experiment (MARTE) drilling exercise.

PubMed

Sutter, Brad; Brown, Adrian J; Stoker, Carol R

2008-10-01

Sampling of subsurface rock may be required to detect evidence of past biological activity on Mars. The Mars Astrobiology Research and Technology Experiment (MARTE) utilized the Río Tinto region, Spain, as a Mars analog site to test dry drilling technologies specific to Mars that retrieve subsurface rock for biological analysis. This work examines the usefulness of visible-near infrared (VNIR) (450-1000 nm) point spectrometry to characterize ferric iron minerals in core material retrieved during a simulated Mars drilling mission. VNIR spectrometry can indicate the presence of aqueously precipitated ferric iron minerals and, thus, determine whether biological analysis of retrieved rock is warranted. Core spectra obtained during the mission with T1 (893-897 nm) and T2 (644-652 nm) features indicate goethite-dominated samples, while relatively lower wavelength T1 (832-880 nm) features indicate hematite. Hematite/goethite molar ratios varied from 0 to 1.4, and within the 880-898 nm range, T1 features were used to estimate hematite/goethite molar ratios. Post-mission X-ray analysis detected phyllosilicates, which indicates that examining beyond the VNIR (e.g., shortwave infrared, 1000-2500 nm) will enhance the detection of other minerals formed by aqueous processes. Despite the limited spectral range of VNIR point spectrometry utilized in the MARTE Mars drilling simulation project, ferric iron minerals could be identified in retrieved core material, and their distribution served to direct core subsampling for biological analysis.

Automation in clinical biochemistry: core, peripheral, STAT, and specialist laboratories in Australia.

PubMed

Streitberg, George S; Angel, Lyndall; Sikaris, Kenneth A; Bwititi, Phillip T

2012-10-01

Pathology has developed substantially since the 1990s with the introduction of total laboratory automation (TLA), in response to workloads and the need to improve quality. TLA has enhanced core laboratories, which evolved from discipline-based laboratories. Work practices have changed, with central reception now loading samples onto the Inlet module of the TLA. It is important to continually appraise technology. This study looked at the impact of technology using a self-administered survey to seniors in clinical biochemistry in NATA GX/GY-classified laboratories in Australia. The responses were yes, no, or not applicable and are expressed as percentages of responses. Some of the questions sourced for descriptive answers. Eighty-one laboratories responded, and the locations were 63%, 33%, and 4% in capital cities, regional cities, and country towns, respectively. Forty-two percent were public and 58% private. Clinical biochemistry was in all core laboratories of various sizes, and most performed up to 20 tests per sample. Thirty percent of the 121 surveyed laboratories had plans to install an automated line. Fifty-eight percent had hematology and biochemistry instrumentations in their peripheral laboratory, and 16% had a STAT laboratory on the same site as the core laboratory. There were varied instruments in specialist laboratories, and analyzers with embedded computers were in all laboratories. Medium and large laboratories had workstations with integrated instruments, and some large laboratories had TLA. Technology evolution and rising demand for pathology services make it imperative for laboratories to embrace such changes and reorganize the laboratories to take into account point-of-care testing and the efficiencies of core laboratories and TLA.

A Nubian Complex Site from Central Arabia: Implications for Levallois Taxonomy and Human Dispersals during the Upper Pleistocene

PubMed Central

Crassard, Rémy; Hilbert, Yamandú Hieronymus

2013-01-01

Archaeological survey undertaken in central Saudi Arabia has revealed 29 surface sites attributed to the Arabian Middle Paleolithic based on the presence of Levallois blank production methods. Technological analyses on cores retrieved from Al-Kharj 22 have revealed specific reduction modalities used to produce flakes with predetermined shapes. The identified modalities, which are anchored within the greater Levallois concept of core convexity preparation and exploitation, correspond with those utilized during the Middle Stone Age Nubian Complex of northeast Africa and southern Arabia. The discovery of Nubian technology at the Al-Kharj 22 site represents the first appearance of this blank production method in central Arabia. Here we demonstrate how a rigorous use of technological and taxonomic analysis may enable intra-regional comparisons across the Arabian Peninsula. The discovery of Al-Kharj 22 increases the complexity of the Arabian Middle Paleolithic archaeological record and suggests new dynamics of population movements between the southern and central regions of the Peninsula. This study also addresses the dichotomy within Nubian core typology (Types 1 and 2), which was originally defined for African assemblages. PMID:23894434

Core/Combustor Noise - Research Overview

NASA Technical Reports Server (NTRS)

Hultgren, Lennart S.

2017-01-01

Contributions from the combustor to the overall propulsion noise of civilian transport aircraft are starting to become important due to turbofan design trends and advances in mitigation of other noise sources. Future propulsion systems for ultra-efficient commercial air vehicles are projected to be of increasingly higher bypass ratio from larger fans combined with much smaller cores, with ultra-clean burning fuel-flexible combustors. Unless effective noise-reduction strategies are developed, combustor noise is likely to become a prominent contributor to overall airport community noise in the future. This presentation gives a brief overview of the NASA outlook on pertinent issues and far-term research needs as well as current and planned research in the core/combustor-noise area. The research described herein is aligned with the NASA Ultra-Efficient Commercial Transport strategic thrust and is supported by the NASA Advanced Air Vehicle Program, Advanced Air Transport Technology Project, under the Aircraft Noise Reduction Subproject. The overarching goal of the Advanced Air Transport Technology (AATT) Project is to explore and develop technologies and concepts to revolutionize the energy efficiency and environmental compatibility of fixed wing transport aircrafts. These technological solutions are critical in reducing the impact of aviation on the environment even as this industry and the corresponding global transportation system continue to grow.

Influence of Educational Technology Centres on Students' Skill Acquisition for Self Employment

ERIC Educational Resources Information Center

Eze, P. I.

2016-01-01

Educational technology is a core course of study in Nigerian teacher education institutions, such as Colleges of Education, Institutes of Education and Facilities of Education. The aim of educational technology is to improve the competence of teachers by producing teachers that can back theory with practice in teaching-learning situation. The…

Motivating Factors of Florida Community and State College Information Technology Faculty

ERIC Educational Resources Information Center

Payne, Wendy Louise

2013-01-01

In this study the core job characteristics that contribute to the internal motivational factors and job satisfaction of information technology faculty members working at a community or state college in Florida were investigated. Fifty-four information technology faculty members working at a community or state college in Florida completed the Job…

More than Beliefs: Subject Areas and Teachers' Integration of Laptops in Secondary Teaching

ERIC Educational Resources Information Center

Howard, Sarah K.; Chan, Amy; Caputi, Peter

2015-01-01

The purpose of this paper is to explore the relationship of subject areas to teachers' technology integration. Educational technology research has often identified "culture clashes" to explain differences in technology use between subject areas. These clashes are frequently attributed to core features, values and beliefs held in the…

Technology Education. Career Awareness & Technology Literacy. Alabama Course of Study. Bulletin 1996, No. 20.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

This guide, which is intended for classroom teachers, supervisors, and administrators throughout Alabama, contains the minimum required content (core program) for public school instruction in career awareness and technological literacy in grades 7-10. Presented first are the following: introduction examining the vision and goals of career…

Assessing Teacher Preparation: Technology Integration in English Education at a Public University

ERIC Educational Resources Information Center

DeAngelis, Anne Marie

2017-01-01

In recent years, teacher preparation programs have revised their curriculum to reflect the changes in K-12 education, especially in terms of technology integration. As more schools implement technology initiatives to align to Common Core State Standards and improve student achievement, teachers find themselves struggling to effectively use…

Seven Affordances of Computer-Supported Collaborative Learning: How to Support Collaborative Learning? How Can Technologies Help?

ERIC Educational Resources Information Center

Jeong, Heisawn; Hmelo-Silver, Cindy E.

2016-01-01

This article proposes 7 core affordances of technology for collaborative learning based on theories of collaborative learning and CSCL (Computer-Supported Collaborative Learning) practices. Technology affords learner opportunities to (1) engage in a joint task, (2) communicate, (3) share resources, (4) engage in productive collaborative learning…

Teaching Speech Communication in a Black College: Does Technology Make a Difference?

ERIC Educational Resources Information Center

Nwadike, Fellina O.; Ekeanyanwu, Nnamdi T.

2011-01-01

Teaching a speech communication course in typical HBCUs (historically black colleges and universities) comes with many issues, because the application of technology in some minority institutions differs. The levels of acceptability as well as affordability are also core issues that affect application. Using technology in the classroom means many…

Examining the Influence of Educational Mobile Application Software on Students' Technology Literacy

ERIC Educational Resources Information Center

Twu, Ming-Lii

2017-01-01

The purpose of this mixed methods study was to employ the International Society for Technology in Education (ISTE) Standards for Students as taxonomy to classify educational mobile application (app) software into seven categories and empirically examine the influence on students' technology literacy. A purposeful sample of fifth grade core subject…

The Nature of Primary Students' Conversation in Technology Education

ERIC Educational Resources Information Center

Fox-Turnbull, Wendy H.

2016-01-01

Classroom conversations are core to establishing successful learning for students. This research explores the nature of conversation in technology education in the primary classroom and the implications for teaching and learning. Over a year, two units of work in technology were taught in two primary classrooms. Most data was gathered in Round 2…

The Implications of Autonomist Marxism for Research and Practice in Education and Technology

ERIC Educational Resources Information Center

Hall, Richard

2015-01-01

This article considers the relevance of Autonomist Marxism for both research and practice in education and technology. The article situates the Autonomist perspective against that of traditional Marxist thought--illustrating how certain core Autonomist concepts enable a critical reading of developments in information and communication technology.…

Two Rotor Stratified Charge Rotary Engine (SCRE) Engine System Technology Evaluation

NASA Technical Reports Server (NTRS)

Hoffman, T.; Mack, J.; Mount, R.

1994-01-01

This report summarizes results of an evaluation of technology enablement component technologies as integrated into a two rotor Stratified Charge Rotary Engine (SCRE). The work constitutes a demonstration of two rotor engine system technology, utilizing upgraded and refined component technologies derived from prior NASA Contracts NAS3-25945, NAS3-24628 and NAS-23056. Technical objectives included definition of, procurement and assembly of an advanced two rotor core aircraft engine, operation with Jet-A fuel at Take-Off rating of 340 BHP (254kW) and operation at a maximum cruise condition of 255 BHP (190kW), 75% cruise. A fuel consumption objective of 0.435 LBS/BHP-Hr (265 GRS/kW-Hr) was identified for the maximum cruise condition. A critical technology component item, a high speed, unit injector fuel injection system with electronic control was defined, procured and tested in conjunction with this effort. The two rotor engine configuration established herein defines an affordable, advanced, Jet-A fuel capability core engine (not including reduction gear, propeller shaft and some aircraft accessories) for General Aviation of the mid-1990's and beyond.

Nigerian Inservice Teachers' Self-Assessment in Core Technology Competences and Their Professional Development Needs in ICT

ERIC Educational Resources Information Center

Aduwa-Ogiegbaen, Sam E. O.

2009-01-01

It is no longer a question whether or not technology should be used in the classroom. The emphasis is ensuring that teachers use technology effectively to create new opportunities for students to learn and raise their achievement. The use of technology in the classroom requires teachers to be knowledgeable and competent in ICTs and to integrate…

Study on establishment of Body of Knowledge of Taiwan's Traditional Wooden Structure Technology

NASA Astrophysics Data System (ADS)

Huang, M. T.; Chiou, S. C.; Hsu, T. W.; Su, P. C.

2015-08-01

The timber technology of the Taiwan traditional architecture is brought by the immigrants in the Southern Fujian of China in the early, which has been inherited for a hundred years. In the past, these traditional timber technologies were taught by mentoring, however, due to the change of the social form, the construction of the traditional architecture was faded away, and what is gradually replaced is the repair work of the traditional architecture, therefore, the construction method of the timber technology, use form of the tool and other factors are very different from previous one, and the core technology is faced with the dilemma of endangered loss. There are many relevant studies on architectural style, construction method of technology, schools of craftsman, technical capacity of craftsman and other timber technologies, or the technology preservation is carried out by dictating the historical record, studying the skills and other ways, but for the timber craftsman repairing the traditional architecture on the front line, there is still space for discussing whether to maintain the original construction method and maintain the due repair quality for the core technology. This paper classified the timber technology knowledge with the document analysis method and expert interview method, carried out the architecture analysis of knowledge hierarchy, and finally, built the preliminary framework of the timber technology knowledge system of the Taiwan traditional architecture, and built the standard formulation available for craftsman training and skills identification by virtue of the knowledge system, so that the craftsman did not affect the technical capacity due to the change of the knowledge instruction system, thus, affecting the repair quality of the traditional architecture; and in addition, the building of the database system can also be derived by means of the knowledge structure, so as to integrate the consistency of the contents of core technical capacity. It can be used as the interpretation data; the knowledge is standardized and the authority file is established, which is regarded as a technical specification, so that the technology is standardized, thus, avoid loss or distort.

Hollow Core Fiber Optics for Mid-Wave and Long-Wave Infrared Spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriesel, J.M.; Gat, N.; Bernacki, Bruce E.

The development and testing of hollow core glass waveguides (i.e., fiber optics) for use in Long-Wave Infrared (LWIR) spectroscopy systems is described. LWIR fiber optics are a key enabling technology needed to improve the utility and effectiveness of trace chemical detection systems based in the 8 to 12 micron region. This paper focuses on recent developments in hollow waveguide technology geared specifically for LWIR spectroscopy, including a reduction in both the length dependent loss and the bending loss while maintaining relatively high beam quality. Results will be presented from tests conducted with a Quantum Cascade Laser.

Thermionic energy conversion technology - Present and future

NASA Technical Reports Server (NTRS)

Shimada, K.; Morris, J. F.

1977-01-01

Aerospace and terrestrial applications of thermionic direct energy conversion and advances in direct energy conversion (DEC) technology are surveyed. Electrode materials, the cesium plasma drop (the difference between the barrier index and the collector work function), DEC voltage/current characteristics, conversion efficiency, and operating temperatures are discussed. Attention is centered on nuclear reactor system thermionic DEC devices, for in-core or out-of-core operation. Thermionic fuel elements, the radiation shield, power conditions, and a waste heat rejection system are considered among the thermionic DEC system components. Terrestrial applications include topping power systems in fossil fuel and solar power generation.

Design of a wearable device for ECG continuous monitoring using wireless technology.

PubMed

Led, Santiago; Fernández, Jorge; Serrano, Luis

2004-01-01

This project focuses on the design and implementation of an intelligent wearable device for ECG continuous acquisition and transmission to some remote gateway using Bluetooth technology. The acquisition device has been designed for having very low power consumption and reduced size. The Analog Devices' ADuC831 Micro-Converter for achieving the analog to digital conversion and the CSR's BlueCore2 chip for the Bluetooth transmission are the core of the device. The designed device is an important component of a complete prototype for remote ECG continuous monitoring of patients with diverse cardiac diseases.

Human spaceflight technology needs-a foundation for JSC's technology strategy

NASA Astrophysics Data System (ADS)

Stecklein, J. M.

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which added risks and became a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation's primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (Tech Needs) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology disciplines. Th- TechNeeds Database greatly clarifies understanding of the complex relationships of critical technologies to mission and architecture element needs. Extensions to the core TechNeeds Database allow JSC to factor in and appropriately weight JSC core technology competencies, and considerations of commercialization potential and partnership potential. The inherent coupling among these, along with an appropriate importance weighting, has provided an initial prioritization for allocation of technology development research funding at JSc. The HAT Technology Needs Database, with a core of built-in reports, clarifies and communicates complex technology needs for cost effective human space exploration so that an organization seeking to assure that research prioritization supports human spaceflight of the future can be successful.

Human Spaceflight Technology Needs - A Foundation for JSC's Technology Strategy

NASA Technical Reports Server (NTRS)

Stecklein, Jonette M.

2013-01-01

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which adds risks as well as provides a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation s primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (TechNeeds) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology disciplines. The TechNeeds Database greatly clarifies understanding of the complex relationships of critical technologies to mission and architecture element needs. Extensions to the core TechNeeds Database allow JSC to factor in and appropriately weight JSC Center Core Technology Competencies, and considerations of Commercialization Potential and Partnership Potential. The inherent coupling among these, along with an appropriate importance weighting, has provided an initial prioritization for allocation of technology development research funding for JSC. The HAT Technology Needs Database, with a core of built-in reports, clarifies and communicates complex technology needs for cost effective human space exploration such that an organization seeking to assure that research prioritization supports human spaceflight of the future can be successful.

[Clinical governance and patient safety culture in clinical laboratories in the Spanish National Health System].

PubMed

Giménez-Marín, Á; Rivas-Ruiz, F

To conduct a situational analysis of patient safety culture in public laboratories in the Spanish National Health System and to determine the clinical governance variables that most strongly influence patient safety. A descriptive cross-sectional study was carried out, in which a Survey of Patient Safety in Clinical Laboratories was addressed to workers in 26 participating laboratories. In this survey, which consisted of 45 items grouped into 6 areas, scores were assigned on a scale from 0 to 100 (where 0 is the lowest perception of patient safety). Laboratory managers were asked specific questions about quality management systems and technology. The mean scores for the 26 participating hospitals were evaluated, and the following results observed: in 4of the 6areas, the mean score was higher than 70 points. In the third area (equipment and resources) and the fourth area (working conditions), the scores were lower than 60 points. Every hospital had a digital medical record system. This 100% level of provision was followed by that of an electronic request management system, which was implemented in 82.6% of the hospitals. The results obtained show that the culture of security is homogeneous and of high quality in health service laboratories, probably due to the steady improvement observed. However, in terms of clinical governance, there is still some way to go, as shown by the presence of weaknesses in crucial dimensions of safety culture, together with variable levels of implementation of fail-safe technologies and quality management systems. Copyright © 2017 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Titanium Aluminide Technologies Successfully Transferred From HSR Program to RLV VentureStar Program

NASA Technical Reports Server (NTRS)

Bartolotta, Paul A.

2000-01-01

Through a cost-share contract, BFGoodrich Aerostructures group successfully fabricated three titanium aluminide (gamma TiAl) truss core structures using technologies pioneered in the High-Speed Research (HSR) program at the NASA Glenn Research Center at Lewis Field. The truss core subelement is approximately 60-cm (24-in.) long by 14-cm (5.5-in.) wide by 6-cm (2.5-in.) deep. To fabricate this subelement, BFGoodrich first obtained gamma TiAl sheets from Plansee (Austria) which produced the sheets using techniques developed collaboratively by Glenn, Pratt & Whitney, and Plansee. This new gamma TiAl production technology has significantly lowered the cost of gamma TiAl sheet (approx. 75-percent decrease) and has made the production of larger gamma TiAl sheets possible (approx. 60-percent increase).

United States Department of Agriculture/Agricultural Research Service (USDA-ARS) Eastern Regional Research Center Core Technologies

PubMed Central

Nunez, A.; Strahan, G.; Soroka, D.S.; Damert, W.; Needleman, D.

2011-01-01

The Core Technologies (CT) unit, located at the Eastern Regional Research Center (ERRC), is a centralized resource of specialized instrumentation and technologies. Its objective is to provide supplementary research data processing, interpretation, analysis and consultation for a broad range of research programs approved by the Agricultural Research Service (ARS), the in-house research arm of the United States Department of Agriculture. The CT unit is comprised of four research related components: genetic analysis, proteomicsbiopolymers mass spectrometry, electron microscopy, and magnetic resonance spectroscopy (NMR). In addition, the Research Data Systems, the information pipeline of the CT, provides the means to facilitate data distribution to researchers, stakeholders, and the general public. The availability of integrated resource laboratories assures professional and dependable support to the goals of the ARS community.

Foam core shield (FCS) systems : a new dual - purpose technology for shielding against meteoroid strike damage and for thermal control of spacecrafts/satellite components

NASA Technical Reports Server (NTRS)

Adams, Marc A.; Zwissler, James G.; Hayes, Charles; Fabensky, Beth; Cornelison, Charles; Alexander, Lesley; Bishop, Karen

2005-01-01

A new technology is being developed that can protect spacecraft and satellite components against damage from meteoroid strikes and control the thermal environment of the protected components. This technology, called Foam Core Shield (FCS) systems, has the potential to replace the multi-layer insulation blankets (MLI) that have been used on spacecraft for decades. In order to be an attractive candidate for replacing MLI, FCS systems should not only provide superior protection against meteoroid strikes but also provide an equal or superior ability to control the temperature of the protected component. Properly designed FCS systems can provide these principal functions, meteoroid strike protection and thermal control, with lower system mass and a smaller system envelope than ML.

Insights into early lithic technologies from ethnography

PubMed Central

Hayden, Brian

2015-01-01

Oldowan lithic assemblages are often portrayed as a product of the need to obtain sharp flakes for cutting into animal carcases. However, ethnographic and experimental research indicates that the optimal way to produce flakes for such butchering purposes is via bipolar reduction of small cryptocrystalline pebbles rather than from larger crystalline cores resembling choppers. Ethnographic observations of stone tool-using hunter-gatherers in environments comparable with early hominins indicate that most stone tools (particularly chopper forms and flake tools) were used for making simple shaft tools including spears, digging sticks and throwing sticks. These tools bear strong resemblances to Oldowan stone tools. Bipolar reduction for butchering probably preceded chopper-like core reduction and provides a key link between primate nut-cracking technologies and the emergence of more sophisticated lithic technologies leading to the Oldowan. PMID:26483534

IFLA General Conference, 1986. Management and Technology Division. Section: Conservation. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions, The Hague (Netherlands).

This document contains three papers on conservation which were presented at the 1986 International Federation of Library Associations (IFLA) conference. In "The IFLA Conservation Section and the Core Programme for Preservation (PAC)," David W. G. Clements of the United Kingdom outlines the background of the Core Programme on Preservation…

Is Knowing Another Language as Important as Knowing "Core" Subjects Like Mathematics or Science

ERIC Educational Resources Information Center

Kouritzin, Sandra G.

2012-01-01

This article explores, through interview data with 125 respondents in Canada, whether the study of foreign languages can be considered as important as the study of the "core" STEMM (science, technology, engineering, mathematics, medicine) subjects in school and university curricula. Five categories of interviewees, including those…

Teaching with Technology in Physical Education

ERIC Educational Resources Information Center

Eberline, Andrew D.; Richards, K. Andrew R.

2013-01-01

Physical education is at a crossroads in the 21st century. With government mandates related to the No Child Left Behind Act (U.S. Department of Education, 2001) emphasizing core subjects, such as math and literacy, non-core subjects have been deemphasized. The most recent "Shape of the Nation Report" (National Association for Sport and…

Testing of a Stacked Core Mirror for UV Applications

NASA Technical Reports Server (NTRS)

Matthews, Gary W.; Kirk, Charles S.; Maffett, Steven P.; Abplanalp, Calvin E.; Stahl, H. Philip; Eng, Ron; Arnold, William R. Sr.

2013-01-01

Advanced Ultraviolet, Optical, Near-Infrared (UVOIR) Mirror Technology Development (AMTD) Testing Summary: (1) Processing of the stacked core mirror converged very quickly using ion figuring. (2) Results show no significant PSD change due to ion figuring in spatial periods smaller than 20mm. (3) Global surface figure limited by mount repeatability

Multimodal Composition and the Common Core State Standards

ERIC Educational Resources Information Center

Dalton, Bridget

2013-01-01

The Common Core State Standards call for an expanded view of literacy instruction, one where children learn to critically consume and produce text using technology and media. This article describes how a Digital Writers' Workshop can be a vehicle for integrating multimodal composition into the classroom. It offers general workshop principles and…

Energy efficient engine. Volume 1: Component development and integration program

NASA Technical Reports Server (NTRS)

1981-01-01

Technology for achieving lower installed fuel consumption and lower operating costs in future commercial turbofan engines are developed, evaluated, and demonstrated. The four program objectives are: (1) propulsion system analysis; (2) component analysis, design, and development; (3) core design, fabrication, and test; and (4) integrated core/low spoon design, fabrication, and test.

EDUCAUSE Core Data Service: Fiscal Year 2005 Summary Report

ERIC Educational Resources Information Center

Hawkins, Brian L.; Rudy, Julia A.

2006-01-01

This report summarizes much of the data collected through the 2005 EDUCAUSE core data survey about campus information technology (IT) environments at 933 colleges and universities in the U.S. and abroad. The report presents aggregates of data through more than 100 tables and accompanying descriptive text in five areas relevant to planning and…

Real Integration--Where the Rubber Meets the Road

ERIC Educational Resources Information Center

Moye, Johnny J.

2011-01-01

Integration of core academics into career and technical education (CTE) is not new. Putting core academics into context, CTE courses provide an excellent platform for students to learn the relevance of science, technology, engineering, and mathematics (STEM) as well as literature, arts, and social studies. Students learn to use this information by…

Increment cores : how to collect, handle and use them

Treesearch

Robert R. Maeglin

1979-01-01

This paper describes increment cores (a useful tool in forestry and wood technology) and their uses which include age determination, growth increment, specific gravity determination, fiber length measurements, fibril angle measurements, cell measurements, and pathological investigations. Also described is the use and care of the increment borer which is essential in...

Technology and Engineering Education and the Common Core Standards

ERIC Educational Resources Information Center

Rust, Terrie

2012-01-01

The nearly unanimous state acceptance of the Common Core State Standards (CCSS) in mathematics and English Language Arts (ELA) jolted many teachers out of their complacency. How was this major change going to impact their teaching and their curriculum? What changes would be made in student assessments and teacher accountability? The good news is…

Mathematical Rigor in the Common Core

ERIC Educational Resources Information Center

Hull, Ted H.; Balka, Don S.; Miles, Ruth Harbin

2013-01-01

A whirlwind of activity surrounds the topic of teaching and learning mathematics. The driving forces are a combination of changes in assessment and advances in technology that are being spurred on by the introduction of content in the Common Core State Standards for Mathematical Practice. Although the issues are certainly complex, the same forces…

Exploring the Core: An Examination of Required Courses in ALA-Accredited

ERIC Educational Resources Information Center

Hall, Russell A.

2009-01-01

This paper examines the required courses of ALA-accredited Library and Information Science programs as published on their websites. The study expands on previous research in this area. Findings show that the typical core curriculum has grown to include both research and information technology in addition to the more traditional subjects. The…

Comparative study between single core model and detail core model of CFD modelling on reactor core cooling behaviour

NASA Astrophysics Data System (ADS)

Darmawan, R.

2018-01-01

Nuclear power industry is facing uncertainties since the occurrence of the unfortunate accident at Fukushima Daiichi Nuclear Power Plant. The issue of nuclear power plant safety becomes the major hindrance in the planning of nuclear power program for new build countries. Thus, the understanding of the behaviour of reactor system is very important to ensure the continuous development and improvement on reactor safety. Throughout the development of nuclear reactor technology, investigation and analysis on reactor safety have gone through several phases. In the early days, analytical and experimental methods were employed. For the last four decades 1D system level codes were widely used. The continuous development of nuclear reactor technology has brought about more complex system and processes of nuclear reactor operation. More detailed dimensional simulation codes are needed to assess these new reactors. Recently, 2D and 3D system level codes such as CFD are being explored. This paper discusses a comparative study on two different approaches of CFD modelling on reactor core cooling behaviour.

U35: Legacy Engine Final Report

DOT National Transportation Integrated Search

2012-07-01

The Legacy engine is a new core technology that can be used with existing infrastructure providing for near term benefits while minimizing costs. Also, as a new technology, it will be optimized for many years to come providing the opportunity for con...

Personnel Administration in an Automated Environment.

ERIC Educational Resources Information Center

Leinbach, Philip E.; And Others

1990-01-01

Fourteen articles address issues related to library personnel administration in an automated environment, such as education for automation, salaries, impact of technology, expert systems, core competencies, administrative issues, technology services, job satisfaction, and performance appraisal. A selected annotated bibliography is included. (MES)

THE MAQC PROJECT: ESTABLISHING QC METRICS AND THRESHOLDS FOR MICROARRAY QUALITY CONTROL

EPA Science Inventory

Microarrays represent a core technology in pharmacogenomics and toxicogenomics; however, before this technology can successfully and reliably be applied in clinical practice and regulatory decision-making, standards and quality measures need to be developed. The Microarray Qualit...

Testing the Effectiveness of Professional Development for Integrating Technology in an Urban Iowa Middle School

ERIC Educational Resources Information Center

Anderson, Barbara A.

2012-01-01

The purpose of this quantitative one-group pretest-posttest design study was to test the effectiveness of professional development for integrating technology in the curriculum of an urban Iowa middle school. Iowa middle school teachers are expected to integrate technology, to comply with Iowa Core Curriculum standards, by 2014. The participants…

Delivering Core Engineering Concepts to Secondary Level Students. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Merrill, Chris; Custer, Rodney L.; Daugherty, Jenny; Westrick, Martin; Zeng, Yong

2007-01-01

Within primary and secondary school technology education, engineering has been proposed as an avenue to bring about technological literacy. Different initiatives such as curriculum development projects (i.e., Project ProBase and Project Lead The Way) and National Science Foundation funded projects such as the National Center for Engineering and…

Teachers' Implementation of Pre-Constructed Dynamic Geometry Tasks in Technology-Intensive Algebra 1 Classrooms

ERIC Educational Resources Information Center

Cayton, Charity Sue-Adams

2012-01-01

Technology use and a focus on 21st century skills, coupled with recent adoption of Common Core State Standards for Mathematics, marks a new challenge for mathematics teachers. Communication, discourse, and tools for enhancing discourse (NCTM, 1991, 2000) play an integral role in successful implementation of technology and mathematics standards.…

Competencies Required for Healthcare Information Technology to Be an Effective Strategic Business Change Partner

ERIC Educational Resources Information Center

Davalos, Eugenia

2013-01-01

One of the core strategies to transform the United States national healthcare system is the implementation of key technologies such as the electronic patient medical record. Such key technologies improve patient care and help the organization gain competitive advantage. With a high demand for strategic and operational change, healthcare providers…

Science/Technology/Society: A Framework for Curriculum Reform in Secondary School Science and Social Studies.

ERIC Educational Resources Information Center

Hickman, Faith M.; And Others

The Science/Technology/Society (STS) theme describes a contemporary trend in education which focuses on the teaching of issues such as air quality, nuclear power, land use, and water resources but justification for including STS in the high school core curriculum has a precedence based on historical connections among science, technology, and…

Pennsylvania Teachers' Perceptions and Use of Social Media Communication Technologies as a Pedagogical Tool

ERIC Educational Resources Information Center

Tozer, Brett C.

2017-01-01

A number of states and organizations have begun to add cross-content technology elements to their educational standards, providing teachers opportunities to use social media communication (SMC) technology in teaching and learning. Specifically, in the Commonwealth of Pennsylvania, the PA Core Standards, which are adapted from the national Common…

New Meets New: Fitting Technology to an Inquiry-Based Teacher Education Program.

ERIC Educational Resources Information Center

Jacobsen, D. Michele; Clark, W. Bruce

The method by which student teachers at the University of Calgary are prepared to meet technology requirements for teacher certification has been made obsolete by the introduction of a new inquiry-based teacher education program. Combined with a new school curriculum, which requires the seamless integration of technology into core subject areas,…

Agriscience Technology Education. Preparing for Careers in Agricultural Science, Business, and Technology. Alabama Course of Study. Bulletin 1996, No. 13.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

This guide, which is intended for classroom teachers, supervisors, and administrators in Alabama, contains the minimum required content (core program) for public school instruction in agriscience technology in grades 7-12. Presented first are the following: introduction examining the mission, purpose, goals, and structure of agriscience technology…

A Study of the 8th Grade Technology Literacy of a Michigan Charter School

ERIC Educational Resources Information Center

Spruill, James E.

2014-01-01

As states adopt the common core state standards and next generation assessments for the 2014-2015 school year, the importance of students' technology literacy will increase Smarter Balanced Assessment Consortium. The next generation assessments will require students to complete technology performance tasks. For the first time in mandatory testing,…

Circulation and teleconnection mechanisms of Northeast Brazil droughts

NASA Astrophysics Data System (ADS)

Hastenrath, Stefan

2006-08-01

The Northern Nordeste of Brazil has its short rainy season narrowly concentrated around March-April, when the interhemispheric southward gradient of sea surface temperature (SST) is weakest and the Intertropical Convergence Zone (ITCZ), which is the main rainbearing system for the Nordeste, reaches its southernmost position in the course of the year. The recurrent Secas (droughts) have a severe socio-economic impact in this semi-arid region. In drought years, the pre-season (October-January) rainfall is scarce, the interhemispheric SST gradient weakened and the basin-wide southerly (northerly) wind component enhanced (reduced), all manifestations of an anomalously far northward ITCZ position. Apart from this ensemble of Atlantic indicators, the Secas also tend to be preceded by anomalously warm equatorial Pacific waters in January. During El Niño years, an upper-tropospheric wave train extends from the equatorial eastern Pacific to the northern tropical Atlantic, affecting the patterns of upper-tropospheric topography and divergence, and hence of vertical motion over the Atlantic. The altered vertical motion leads to a weaker meridional pressure gradient on the equatorward flank of the North Atlantic subtropical high, and thus weaker North Atlantic tradewinds. The concomitant reduction of evaporation and wind stirring allows for warmer surface waters in the tropical North Atlantic and thus steeper interhemispheric meridional thermal gradient. Consequently, the ITCZ stays anomalously far North and the Nordeste rainy season becomes deficient.

Fabrication of core-shell micro/nanoparticles for programmable dual drug release by emulsion electrospraying

NASA Astrophysics Data System (ADS)

Wang, Yazhou; Zhang, Yiqiong; Wang, Bochu; Cao, Yang; Yu, Qingsong; Yin, Tieying

2013-06-01

The study aimed at constructing a novel drug delivery system for programmable multiple drug release controlled with core-shell structure. The core-shell structure consisted of chitosan nanoparticles as core and polyvinylpyrrolidone micro/nanocoating as shell to form core-shell micro/nanoparticles, which was fabricated by ionic gelation and emulsion electrospray methods. As model drug agents, Naproxen and rhodamine B were encapsulated in the core and shell regions, respectively. The core-shell micro/nanoparticles thus fabricated were characterized and confirmed by scanning electron microscope, transmission electron microscope, and fluorescence optical microscope. The core-shell micro/nanoparticles showed good release controllability through drug release experiment in vitro. It was noted that a programmable release pattern for dual drug agents was also achieved by adjusting their loading regions in the core-shell structures. The results indicate that emulsion electrospraying technology is a promising approach in fabrication of core-shell micro/nanoparticles for programmable dual drug release. Such a novel multi-drug delivery system has a potential application for the clinical treatment of cancer, tuberculosis, and tissue engineering.

Low Power Consumption Design and Fabrication of Thin Film Core for Micro Fluxgate.

PubMed

Lv, Hui; Liu, Shibin

2016-03-01

The soft magnetic characteristic of core is a critical factor to performance of the micro fluxgate. Porous thin film core can be effectively used to decrease the value of saturation magnetic field strength (H(s)) and improve soft magnetic behavior. It is conducive to impelling the micro fluxgate toward the direction of low power consumption. In this work, negative photoresist is used to fabricate a porous core by MEMS technology. Through the processes of ultraviolet-lithography, the porous pattern transfer from the mask to the microstructure on silicon substrate. The experiment result complies with the anticipation and indicates that this MEMS technique can be applied to improve the characteristic of thin film core and decrease power consumption of fluxgate sensor.

48 CFR 3452.239-73 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Configuration (FDCC) Compatibility (MAR 2011) (a) (1) The provider of information technology shall certify... alter the configuration settings from the approved FDCC configuration. The information technology should... DEPARTMENT OF EDUCATION ACQUISITION REGULATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES...

48 CFR 3452.239-73 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Configuration (FDCC) Compatibility (MAR 2011) (a) (1) The provider of information technology shall certify... alter the configuration settings from the approved FDCC configuration. The information technology should... DEPARTMENT OF EDUCATION ACQUISITION REGULATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES...

48 CFR 3452.239-73 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Configuration (FDCC) Compatibility (MAR 2011) (a) (1) The provider of information technology shall certify... alter the configuration settings from the approved FDCC configuration. The information technology should... DEPARTMENT OF EDUCATION ACQUISITION REGULATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES...

48 CFR 3452.239-73 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Configuration (FDCC) Compatibility (MAR 2011) (a) (1) The provider of information technology shall certify... alter the configuration settings from the approved FDCC configuration. The information technology should... DEPARTMENT OF EDUCATION ACQUISITION REGULATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES...

Ohio Information Technology Competency Profile.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus.

This profile includes a comprehensive set of information technology competencies that are grounded in core academic subject areas and built around four occupational clusters (information services and support, network systems, programming and software development, and interactive media) that reflect the job opportunities and skills required for…

Systematic technology evaluation program for SiC/SiC composite-based accident-tolerant LWR fuel cladding and core structures: Revision 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katoh, Yutai; Terrani, Kurt A.

2015-08-01

Fuels and core structures in current light water reactors (LWR’s) are vulnerable to catastrophic failure in severe accidents as unfortunately evidenced by the March 2011 Fukushima Dai-ichi Nuclear Power Plant Accident. This vulnerability is attributed primarily to the rapid oxidation kinetics of zirconium alloys in a water vapor environment at very high temperatures. Zr alloys are the primary material in LWR cores except for the fuel itself. Therefore, alternative materials with reduced oxidation kinetics as compared to zirconium alloys are sought to enable enhanced accident-tolerant fuels and cores.

The BiSciCol Triplifier: bringing biodiversity data to the Semantic Web.

PubMed

Stucky, Brian J; Deck, John; Conlin, Tom; Ziemba, Lukasz; Cellinese, Nico; Guralnick, Robert

2014-07-29

Recent years have brought great progress in efforts to digitize the world's biodiversity data, but integrating data from many different providers, and across research domains, remains challenging. Semantic Web technologies have been widely recognized by biodiversity scientists for their potential to help solve this problem, yet these technologies have so far seen little use for biodiversity data. Such slow uptake has been due, in part, to the relative complexity of Semantic Web technologies along with a lack of domain-specific software tools to help non-experts publish their data to the Semantic Web. The BiSciCol Triplifier is new software that greatly simplifies the process of converting biodiversity data in standard, tabular formats, such as Darwin Core-Archives, into Semantic Web-ready Resource Description Framework (RDF) representations. The Triplifier uses a vocabulary based on the popular Darwin Core standard, includes both Web-based and command-line interfaces, and is fully open-source software. Unlike most other RDF conversion tools, the Triplifier does not require detailed familiarity with core Semantic Web technologies, and it is tailored to a widely popular biodiversity data format and vocabulary standard. As a result, the Triplifier can often fully automate the conversion of biodiversity data to RDF, thereby making the Semantic Web much more accessible to biodiversity scientists who might otherwise have relatively little knowledge of Semantic Web technologies. Easy availability of biodiversity data as RDF will allow researchers to combine data from disparate sources and analyze them with powerful linked data querying tools. However, before software like the Triplifier, and Semantic Web technologies in general, can reach their full potential for biodiversity science, the biodiversity informatics community must address several critical challenges, such as the widespread failure to use robust, globally unique identifiers for biodiversity data.

The use of hollow-core photonic crystal fibres as biological sensors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malinin, A V; Skibina, Yu S; Tuchin, Valerii V

2011-04-30

The results of development and study of a new type of a hollow-core photonic crystal fibre with radially increasing diameter of capillaries in the structured cladding are presented. The waveguide possesses a specific transmission spectrum and can be used as an efficient analyser of biological media. (optical technologies in biophysics and medicine)

Northwest Manufacturing Initiative

DTIC Science & Technology

2012-03-27

crack growth and threshold stress corrosion cracking evaluation. Threshold stress corrosion cracking was done using the rising step load method with...Group Technology methods to establish manufacturing cells for production efficiency, to develop internal Lean Champions, and to implement rapid... different levels, advisory, core, etc. VI. Core steering committee composed of members that have a significant vested interest. Action Item: Draft

A Distributed Fiber Optic Sensor Network for Online 3-D Temperature and Neutron Fluence Mapping in a VHTR Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsvetkov, Pavel; Dickerson, Bryan; French, Joseph

2014-04-30

Robust sensing technologies allowing for 3D in-core performance monitoring in real time are of paramount importance for already established LWRs to enhance their reliability and availability per year, and therefore, to further facilitate their economic competitiveness via predictive assessment of the in-core conditions.

From Prescribed Curriculum to Classroom Practice: An Examination of the Implementation of the New York State Earth Science Standards

ERIC Educational Resources Information Center

Contino, Julie; Anderson, O. Roger

2013-01-01

In New York State (NYS), Earth science teachers use the "National Science Education Standards" (NSES), the NYS "Learning Standards for Mathematics, Science and Technology" (NYS Standards), and the "Physical Setting/Earth Science Core Curriculum" (Core Curriculum) to create local curricula and daily lessons. In this…

Small Core, Big Network: A Comprehensive Approach to GIS Teaching Practice Based on Digital Three-Dimensional Campus Reconstruction

ERIC Educational Resources Information Center

Cheng, Liang; Zhang, Wen; Wang, Jiechen; Li, Manchun; Zhong, Lishan

2014-01-01

Geographic information science (GIS) features a wide range of disciplines and has broad applicability. Challenges associated with rapidly developing GIS technology and the currently limited teaching and practice materials hinder universities from cultivating highly skilled GIS graduates. Based on the idea of "small core, big network," a…

Multimedia Learning System and Its Effect on Self-Efficacy in Database Modeling and Design: An Exploratory Study

ERIC Educational Resources Information Center

Cheung, Waiman; Li, Eldon Y.; Yee, Lester W.

2003-01-01

Metadatabase modeling and design integrate process modeling and data modeling methodologies. Both are core topics in the information technology (IT) curriculum. Learning these topics has been an important pedagogical issue to the core studies for management information systems (MIS) and computer science (CSc) students. Unfortunately, the learning…

Core Clinical Data Elements for Cancer Genomic Repositories: A Multi-stakeholder Consensus.

PubMed

Conley, Robert B; Dickson, Dane; Zenklusen, Jean Claude; Al Naber, Jennifer; Messner, Donna A; Atasoy, Ajlan; Chaihorsky, Lena; Collyar, Deborah; Compton, Carolyn; Ferguson, Martin; Khozin, Sean; Klein, Roger D; Kotte, Sri; Kurzrock, Razelle; Lin, C Jimmy; Liu, Frank; Marino, Ingrid; McDonough, Robert; McNeal, Amy; Miller, Vincent; Schilsky, Richard L; Wang, Lisa I

2017-11-16

The Center for Medical Technology Policy and the Molecular Evidence Development Consortium gathered a diverse group of more than 50 stakeholders to develop consensus on a core set of data elements and values essential to understanding the clinical utility of molecularly targeted therapies in oncology. Copyright © 2017 Elsevier Inc. All rights reserved.

Integrating Apps with the Core Arts Standards in the 21st-Century Elementary Music Classroom

ERIC Educational Resources Information Center

Heath-Reynolds, Julia; VanWeelden, Kimberly

2015-01-01

The implementation of the National Core Arts Standards has amplified the need for multiple approaches and opportunities for student responses and may compel music educators to use new tools. There are currently over one million available apps, and with the popularity of smart devices, student access to technology is increasing exponentially. Music…

Core Self-Evaluations as a Mediator between Functional Disability and Life Satisfaction in College Students with Disabilities Majoring in Science and Technology

ERIC Educational Resources Information Center

Smedema, Susan Miller; Pfaller, Joseph S.; Yaghmaian, Rana A.; Weaver, Hayley; da Silva Cardoso, Elizabeth; Chan, Fong

2015-01-01

Purpose: To examine the mediational effect of core self-evaluations (CSE) on the relationship between functional disability and life satisfaction. Methods: A quantitative descriptive design using multiple regression analysis. The participants were 97 college students with disabilities receiving services through Hunter College's Minority-Disability…

Fire in the Sky--From Big Bang to Big Money: Outdoor Education and Sustainable Development. Part One.

ERIC Educational Resources Information Center

Walker, Rod

1998-01-01

Within diverse outdoor educational activities, a core experience of connection with the earth balances self, others, and nature with elements of ritual. Most effective when experiential, integrated, and technologically simple, the core experience's educative power lies in awakening awareness of interconnectedness between human and nonhuman life.…

Research Commentary: Educational Technology--An Equity Challenge to the Common Core

ERIC Educational Resources Information Center

Kitchen, Richard; Berk, Sarabeth

2016-01-01

The implementation of the Common Core State Standards for Mathematics (National Governors Association Center for Best Practices & Council of Chief State School Officers, 2010) has the potential to move forward key features of standards-based reforms in mathematics that have been promoted in the United States for more than 2 decades (e.g.,…

Proceedings of the wellbore sampling workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Traeger, R.K.; Harding, B.W.

Representatives from academia, industry and research laboratories participated in an intensive two-day review to identify major technological limitations in obtaining solid and fluid samples from wellbores. Top priorities identified for further development include: coring of hard and unconsolidated materials; flow through fluid samplers with borehole measurements T, P and pH; and nonintrusive interrogation of pressure cores.

Social Media, Big Data, and Mental Health: Current Advances and Ethical Implications.

PubMed

Conway, Mike; O'Connor, Daniel

2016-06-01

Mental health (including substance abuse) is the fifth greatest contributor to the global burden of disease, with an economic cost estimated to be US $2.5 trillion in 2010, and expected to double by 2030. Developing information systems to support and strengthen population-level mental health monitoring forms a core part of the World Health Organization's Comprehensive Action Plan 2013-2020. In this paper, we review recent work that utilizes social media "big data" in conjunction with associated technologies like natural language processing and machine learning to address pressing problems in population-level mental health surveillance and research, focusing both on technological advances and core ethical challenges.

2013 R&D 100 Award: New tech could mean more power for fiber lasers

ScienceCinema

Dawson, Jay

2018-01-16

An LLNL team of six physicists has developed a new technology that is a stepping stone to enable some of the limitations on high-power fiber lasers to be overcome. Their technology, dubbed "Efficient Mode-Converters for High-Power Fiber Amplifiers," allows the power of fiber lasers to be increased while maintaining high beam quality. Currently, fiber lasers are used in machining, on factory floors and in a number of defense applications and can produce tens of kilowatts of power.The conventional fiber laser design features a circular core and has fundamental limitations that make it impractical to allow higher laser power unless the core area is increased. LLNL researchers have pioneered a design to increase the laser's core area along the axis of the ribbon fiber. Their design makes it difficult to use a conventional laser beam, so the LLNL team converted the beam into a profile that propagates into the ribbon fiber and is converted back once it is amplified. The use of this LLNL technology will permit the construction of higher power lasers for lower costs and increase the power of fiber lasers from tens of kilowatts of power to about 100 kilowatts and potentially even higher.

Application and the key technology on high power fiber-optic laser in laser weapon

NASA Astrophysics Data System (ADS)

Qu, Zhou; Li, Qiushi; Meng, Haihong; Sui, Xin; Zhang, Hongtao; Zhai, Xuhua

2014-12-01

The soft-killing laser weapon plays an important role in photoelectric defense technology. It can be used for photoelectric detection, search, blinding of photoelectric sensor and other devices on fire control and guidance devices, therefore it draws more and more attentions by many scholars. High power fiber-optic laser has many virtues such as small volume, simple structure, nimble handling, high efficiency, qualified light beam, easy thermal management, leading to blinding. Consequently, it may be used as the key device of soft-killing laser weapon. The present study introduced the development of high power fiber-optic laser and its main features. Meanwhile the key technology of large mode area (LMA) optical fiber design, the beam combination technology, double-clad fiber technology and pumping optical coupling technology was stated. The present study is aimed to design high doping LMA fiber, ensure single mode output by increasing core diameter and decrease NA. By means of reducing the spontaneous emission particle absorbed by fiber core and Increasing the power density in the optical fiber, the threshold power of nonlinear effect can increase, and the power of single fiber will be improved. Meantime, high power will be obtained by the beam combination technology. Application prospect of high power fiber laser in photoelectric defense technology was also set forth. Lastly, the present study explored the advantages of high power fiber laser in photoelectric defense technology.

Kilopower: Small and Affordable Fission Power Systems for Space

NASA Technical Reports Server (NTRS)

Mason, Lee; Palac, Don; Gibson, Marc

2017-01-01

The Nuclear Systems Kilopower Project was initiated by NASA's Space Technology Mission Directorate Game Changing Development Program in fiscal year 2015 to demonstrate subsystem-level technology readiness of small space fission power in a relevant environment (Technology Readiness Level 5) for space science and human exploration power needs. The Nuclear Systems Kilopower Project centerpiece is the Kilopower Reactor Using Stirling Technology (KRUSTY) test, which consists of the development and testing of a fission ground technology demonstrator of a 1 kWe-class fission power system. The technologies to be developed and validated by KRUSTY are extensible to space fission power systems from 1 to 10 kWe, which can enable higher power future potential deep space science missions, as well as modular surface fission power systems for exploration. The Kilopower Project is cofounded by NASA and the Department of Energy National Nuclear Security Administration (NNSA).KRUSTY include the reactor core, heat pipes to transfer the heat from the core to the power conversion system, and the power conversion system. Los Alamos National Laboratory leads the design of the reactor, and the Y-12 National Security Complex is fabricating it. NASA Glenn Research Center (GRC) has designed, built, and demonstrated the balance of plant heat transfer and power conversion portions of the KRUSTY experiment. NASA MSFC developed an electrical reactor simulator for non-nuclear testing, and the design of the reflector and shielding for nuclear testing. In 2016, an electrically heated non-fissionable Depleted Uranium (DU) core was tested at GRC in a configuration identical to the planned nuclear test. Once the reactor core has been fabricated and shipped to the Device Assembly Facility at the NNSAs Nevada National Security Site, the KRUSTY nuclear experiment will be assembled and tested. Completion of the KRUSTY experiment will validate the readiness of 1 to 10 kWe space fission technology for NASAs future requirements for sunlight-independent space power. An early opportunity for demonstration of In-Situ Resource Utilization (ISRU) capability on the surface of Mars is currently being considered for 2026 launch. Since a space fission system is the leading option for power generation for the first Mars human outpost, a smaller version of a planetary surface fission power system could be built to power the ISRU demonstration and ensure its end-to-end validity. Planning is underway to start the hardware development of this subscale flight demonstrator in 2018.

Insights into early lithic technologies from ethnography.

PubMed

Hayden, Brian

2015-11-19

Oldowan lithic assemblages are often portrayed as a product of the need to obtain sharp flakes for cutting into animal carcases. However, ethnographic and experimental research indicates that the optimal way to produce flakes for such butchering purposes is via bipolar reduction of small cryptocrystalline pebbles rather than from larger crystalline cores resembling choppers. Ethnographic observations of stone tool-using hunter-gatherers in environments comparable with early hominins indicate that most stone tools (particularly chopper forms and flake tools) were used for making simple shaft tools including spears, digging sticks and throwing sticks. These tools bear strong resemblances to Oldowan stone tools. Bipolar reduction for butchering probably preceded chopper-like core reduction and provides a key link between primate nut-cracking technologies and the emergence of more sophisticated lithic technologies leading to the Oldowan. © 2015 The Author(s).

An historical collection of papers on nuclear thermal propulsion

NASA Astrophysics Data System (ADS)

The present volume of historical papers on nuclear thermal propulsion (NTP) encompasses NTP technology development regarding solid-core NTP technology, advanced concepts from the early years of NTP research, and recent activities in the field. Specific issues addressed include NERVA rocket-engine technology, the development of nuclear rocket propulsion at Los Alamos, fuel-element development, reactor testing for the Rover program, and an overview of NTP concepts and research emphasizing two decades of NASA research. Also addressed are the development of the 'nuclear light bulb' closed-cycle gas core and a demonstration of a fissioning UF6 gas in an argon vortex. The recent developments reviewed include the application of NTP to NASA's Lunar Space Transportation System, the use of NTP for the Space Exploration Initiative, and the development of nuclear rocket engines in the former Soviet Union.

Human Body Interfacing.

ERIC Educational Resources Information Center

Fryda, Lawrence J.; Harrington, Robert; Szumal, Clint

Electronics Engineering Technology majors in the Industrial and Engineering Technology department at Central Michigan University have developed many real-world projects that represent the type of problem-solving projects encouraged by industry. Two projects that can be used by other educators as freestanding projects or as the core for further…

Overview and Accomplishments of Advanced Mirror Technology Development Phase 2 (AMTD-2) Project

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2015-01-01

The Advance Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort, initiated in FY12, to mature by at least a half TRL step critical technologies required to enable 4 meter or larger UVOIR space telescope primary mirror assemblies for both general astrophysics and ultra-high contrast observations of exoplanets. AMTD Phase 1 completed all of its goals and accomplished all of its milestones. AMTD Phase 2 started in 2014. Key accomplishments include deriving primary mirror engineering specifications from science requirements; developing integrated modeling tools and using those tools to perform parametric design trades; and demonstrating new mirror technologies via sub-scale fabrication and test. AMTD-1 demonstrated the stacked core technique by making a 43-cm diameter 400 mm thick 'biscuit-cut' of a 4-m class mirror. AMTD-2 is demonstrating lateral scalability of the stacked core method by making a 1.5 meter 1/3rd scale model of a 4-m class mirror.

Blue upconversion in Yb3+/Tm3+ co-doped silica fiber based on glass phase-separation technology

NASA Astrophysics Data System (ADS)

Yang, Yu; Chu, Yingbo; Chen, Zhangru; Xing, Yingbin; Hu, Xionwei; Li, Haiqing; Peng, Jinggang; Dai, Nengli; Li, Jinyan; Yang, Luyun

2018-02-01

Yb3+/Tm3+ co-doped silica fiber was prepared successfully by glass phase-separation technology. The measured refractive index profile indicated that the active fiber core had an excellent uniformity. The highest emission intensity was obtained in a sample with a Yb3+ concentration of 0.3 mol/L and a Tm3+ concentration of 0.1 mol/L. Under the excitation at 976 nm, intense blue upconversion emission of Tm3+ at 474 nm was observed due to energy transfer from Yb3+ to Tm3+. A three-photon process was responsible for the blue emission. Due to re-absorption resulted from the Tm3+:3H6→1G4 transition, the blue emission peak was red-shifted. It is suggested that the fiber preparation technology based on glass phase-separation technology can be a potential candidate for preparing active fibers with large core or complex fiber structure.

s-core network decomposition: A generalization of k-core analysis to weighted networks

NASA Astrophysics Data System (ADS)

Eidsaa, Marius; Almaas, Eivind

2013-12-01

A broad range of systems spanning biology, technology, and social phenomena may be represented and analyzed as complex networks. Recent studies of such networks using k-core decomposition have uncovered groups of nodes that play important roles. Here, we present s-core analysis, a generalization of k-core (or k-shell) analysis to complex networks where the links have different strengths or weights. We demonstrate the s-core decomposition approach on two random networks (ER and configuration model with scale-free degree distribution) where the link weights are (i) random, (ii) correlated, and (iii) anticorrelated with the node degrees. Finally, we apply the s-core decomposition approach to the protein-interaction network of the yeast Saccharomyces cerevisiae in the context of two gene-expression experiments: oxidative stress in response to cumene hydroperoxide (CHP), and fermentation stress response (FSR). We find that the innermost s-cores are (i) different from innermost k-cores, (ii) different for the two stress conditions CHP and FSR, and (iii) enriched with proteins whose biological functions give insight into how yeast manages these specific stresses.

[Implementation of a patient safety strategy in primary care of the Community of Madrid].

PubMed

Cañada Dorado, A; Drake Canela, M; Olivera Cañadas, G; Mateos Rodilla, J; Mediavilla Herrera, I; Miquel Gómez, A

2015-01-01

This paper describes the implementation of a patient safety strategy in primary care within the new organizational and functional structure that was created in October 2010 to cover the single primary health care area of the Community of Madrid. The results obtained in Patient Safety after the implementation of this new model over the first two years of its development are also presented. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

Technological Innovation of Thin-Film Transistors: Technology Development, History, and Future

NASA Astrophysics Data System (ADS)

Yamamoto, Yoshitaka

2012-06-01

The scale of the liquid crystal display industry has expanded rapidly, driven by technological innovations for thin-film transistors (TFTs). The TFT technology, which started from amorphous silicon (a-Si), has produced large TVs, and low-temperature polycrystalline silicon (poly-Si) has become a core technology for small displays, such as mobile phones. Recently, various TFT technological seeds have been realized, indicating that new information appliances that match new lifestyles and information infrastructures will be available in the near future. In this article, I review the history of TFT technology and discuss the future of TFT technological development from the technological innovation viewpoint.

UTC Power/Delphi SECA CBS Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorman, Michael; Kerr, Rich

2013-04-04

The subject report summarizes the results of solid oxide fuel cell development conducted by UTC Power in conjunction with Delphi Automotive Systems under a cost-share program with from October 2008 through March of 2013. Over that period Delphi Automotive Systems developed a nearly four times larger area solid oxide fuel cell stack capable of operating on pre-reformed natural gas and simulated coal gas with durability demonstrated to 5,000 hours and projected to exceed 10,000 hours. The new stack design was scaled to 40-cell stacks with power output in excess of 6.25kW. Delphi also made significant strides in improving the manufacturability,more » yield and production cost of these solid oxide fuel cells over the course of the program. Concurrently, UTC Power developed a conceptual design for a 120 MW Integrated Gasification Fuel Cell (IGFC) operating on coal syngas with as high as 57% Higher Heating Value (HHV) efficiency as a measure of the feasibility of the technology. Subsequently a 400 kW on-site system preliminary design with 55% Lower Heating Value (LHV) efficiency operating on natural gas was down-selected from eighteen candidate designs. That design was used as the basis for a 25kW breadboard power plant incorporating four Delphi cell stacks that was tested on natural gas before the program was discontinued due to the sale of UTC Power in early 2013. Though the program was cut short of the endurance target of 3,000 hours, many aspects of the technology were proven including: large-area, repeatable cell manufacture, cell stack operation on simulated coal gas and natural gas and integrated power plant operation on natural gas. The potential of the technology for high efficiency stationary electric power generation is clear. Acceptable production costs, durability, and reliability in real world environments are the remaining challenges to commercialization.« less

Women in a Technological World: An Interdisciplinary Core Course at Emmanuel College in Boston.

ERIC Educational Resources Information Center

Contrucci, Joyce; Fischer, Britta

1990-01-01

Described is a course focused on how women are globally connected through experiences with technology. Specific topics include computers, world hunger, reproductive strategies, and solid waste disposal. Discussed is the impact of the class on students and the faculty. (KR)

Urban Elementary STEM Initiative

ERIC Educational Resources Information Center

Parker, Carolyn; Abel, Yolanda; Denisova, Ekaterina

2015-01-01

The new standards for K-12 science education suggest that student learning should be more integrated and should focus on crosscutting concepts and core ideas from the areas of physical science, life science, Earth/space science, and engineering/technology. This paper describes large-scale, urban elementary-focused science, technology, engineering,…

Theorizing the Nexus of STEAM Practice

ERIC Educational Resources Information Center

Peppler, Kylie; Wohlwend, Karen

2018-01-01

Recent advances in arts education policy, as outlined in the latest National Core Arts Standards, advocate for bringing digital media into the arts education classroom. The promise of such Science, Technology, Engineering, Arts, and Mathematics (STEAM)-based approaches is that, by coupling Science, Technology, Engineering, and Mathematics (STEM)…

Commentary: Ubiquitous Computing Revisited--A New Perspective

ERIC Educational Resources Information Center

Bull, Glen; Garofalo, Joe

2006-01-01

In 2002, representatives from the teacher educator associations representing the core content areas (science, mathematics, language arts, and social studies) and educational technology met at the National Technology Leadership Retreat (NTLR) to discuss potential implications of ubiquitous computing for K-12 schools. This paper re-examines some of…

Computer Science (CS) Education in Indian Schools: Situation Analysis Using Darmstadt Model

ERIC Educational Resources Information Center

Raman, Raghu; Venkatasubramanian, Smrithi; Achuthan, Krishnashree; Nedungadi, Prema

2015-01-01

Computer science (CS) and its enabling technologies are at the heart of this information age, yet its adoption as a core subject by senior secondary students in Indian schools is low and has not reached critical mass. Though there have been efforts to create core curriculum standards for subjects like Physics, Chemistry, Biology, and Math, CS…

Solving the Common Core Equation: Teaching Mathematics CCSS to Students with Moderate and Severe Disabilities

ERIC Educational Resources Information Center

Saunders, Alicia F.; Bethune, Keri S.; Spooner, Fred; Browder, Diane

2013-01-01

The Common Core State Standards (CCSS) in mathematics were created to help all students become prepared for the demands of future careers and life in an age of technology. Similarly, students with moderate and severe disability will need these skills to meet these changing expectations. Although mathematics instruction could focus on a few of the…

Testing under the Microscope: How Common Core-Aligned Assessments Place Demands on Time, Technology, and Connectivity

ERIC Educational Resources Information Center

Stephens, Wendy

2014-01-01

School librarians and other specialists should take note of the new wave of computer-based assessments required by the Common Core State Standards (CCSS), testing that is only now beginning to get off the ground. The new testing necessitates that districts possess the right hardware, install the requisite software, and, in some cases, create…

Modeling of Core Competencies in the Registrar's Office

ERIC Educational Resources Information Center

Pikowsky, Reta

2009-01-01

The Office of the Registrar at the Georgia Institute of Technology, in cooperation with the Office of Human Resources, has been engaged since February 2008 in a pilot project to model core competencies for the leadership team and the staff. It is the hope of the office of Human resources that this pilot will result in a model that can be used…

Mathematics Formative Assessment System--Common Core State Standards: A Randomized Field Trial in Kindergarten and First Grade

ERIC Educational Resources Information Center

Lang, Laura B.; Schoen, Robert R.; LaVenia, Mark; Oberlin, Maureen

2014-01-01

The Florida Center for Research in Science, Technology, Engineering and Mathematics (FCR-STEM) was awarded a grant by the Florida Department of Education to develop a Mathematics Formative Assessment System (MFAS) aligned with the Common Core State Standards (CCSS). Intended for both teachers and students, formative assessment is a process that…

The Persistence of Mode 1 Technology in the Korean Late Paleolithic

PubMed Central

Lee, Hyeong Woo

2013-01-01

Ssangjungri (SJ), an open-air site with several Paleolithic horizons, was recently discovered in South Korea. Most of the identified artifacts are simple core and flake tools that indicate an expedient knapping strategy. Bifacially worked core tools, which might be considered non-classic bifaces, also have been found. The prolific horizons at the site were dated by accelerator mass spectrometry (AMS) to about 30 kya. Another newly discovered Paleolithic open-air site, Jeungsan (JS), shows a homogeneous lithic pattern during this period. The dominated artifact types and usage of raw materials are similar in character to those from SJ, although JS yielded a larger number of simple core and flake tools with non-classic bifaces. Chronometric analysis by AMS and optically stimulated luminescence (OSL) indicate that the prime stratigraphic levels at JS also date to approximately 30 kya, and the numerous conjoining pieces indicate that the layers were not seriously affected by post-depositional processes. Thus, it can be confirmed that simple core and flake tools were produced at temporally and culturally independent sites until after 30 kya, supporting the hypothesis of a wide and persistent use of simple technology into the Late Pleistocene. PMID:23724113

Successful development of first-generation laser device; marking China's optoelectronic technology at world class level

NASA Astrophysics Data System (ADS)

1995-04-01

Bell Laboratories has developed the world's first optical information processor. Its core device is a self-excited electrooptical effect apparatus array of symmetric operation. After being developed in the United States, this high-technology device was successfully developed by China's scientists,thus making the fact that China's optoelectronic technology is among the most advanced in the world.

Campus Computing, 1998. The Ninth National Survey of Desktop Computing and Information Technology in American Higher Education.

ERIC Educational Resources Information Center

Green, Kenneth C.

This report presents findings of a June 1998 survey of computing officials at 1,623 two- and four-year U.S. colleges and universities concerning the use of computer technology. The survey found that computing and information technology (IT) are now core components of the campus environment and classroom experience. However, key aspects of IT…

The Human Domain and the Future of Army Warfare: Present as Prelude to 2050

DTIC Science & Technology

2017-07-01

ERDC/CERL MP-17-2 ii Abstract Studies on the future of warfare tend to focus on technology and place but largely overlook the actors. Warfare in 2050...will be predominantly urban, utilizing robotics and other advanced technologies , but at the core will re- main an inherently human and political...collaboration for success. Despite the ap- peal of advanced technology , the U.S. Army could greatly benefit by looking beyond strictly technological

Mastery of Content Representation (CoRes) Related TPACK High School Biology Teacher

NASA Astrophysics Data System (ADS)

Nasution, W. R.; Sriyati, S.; Riandi, R.; Safitri, M.

2017-09-01

The purpose of this study was to determine the mastery of Content Representation (CoRes) teachers related to the integration of technology and pedagogy in teaching Biology (TPACK). This research uses a descriptive method. The data were taken using instruments CoRes as the primary data and semi-structured interviews as supporting data. The subjects were biology teacher in class X MIA from four schools in Bandung. Teachers raised CoRes was analyzed using a scoring rubric CoRes with coding 1-3 then categorized into a group of upper, middle, or lower. The results showed that the two teachers in the lower category. This results means that the control of teachers in defining the essential concept in the CoRes has not been detailed and specific. Meanwhile, two other teachers were in the middle category. This means that the ability of teachers to determine the essential concepts in the CoRes are still inadequate so that still needs to be improved.

Combustion and Engine-Core Noise

NASA Astrophysics Data System (ADS)

Ihme, Matthias

2017-01-01

The implementation of advanced low-emission aircraft engine technologies and the reduction of noise from airframe, fan, and jet exhaust have made noise contributions from an engine core increasingly important. Therefore, meeting future ambitious noise-reduction goals requires the consideration of engine-core noise. This article reviews progress on the fundamental understanding, experimental analysis, and modeling of engine-core noise; addresses limitations of current techniques; and identifies opportunities for future research. After identifying core-noise contributions from the combustor, turbomachinery, nozzles, and jet exhaust, they are examined in detail. Contributions from direct combustion noise, originating from unsteady combustion, and indirect combustion noise, resulting from the interaction of flow-field perturbations with mean-flow variations in turbine stages and nozzles, are analyzed. A new indirect noise-source contribution arising from mixture inhomogeneities is identified by extending the theory. Although typically omitted in core-noise analysis, the impact of mean-flow variations and nozzle-upstream perturbations on the jet-noise modulation is examined, providing potential avenues for future core-noise mitigation.

Disaster and Contingency Planning for Scientific Shared Resource Cores.

PubMed

Mische, Sheenah; Wilkerson, Amy

2016-04-01

Progress in biomedical research is largely driven by improvements, innovations, and breakthroughs in technology, accelerating the research process, and an increasingly complex collaboration of both clinical and basic science. This increasing sophistication has driven the need for centralized shared resource cores ("cores") to serve the scientific community. From a biomedical research enterprise perspective, centralized resource cores are essential to increased scientific, operational, and cost effectiveness; however, the concentration of instrumentation and resources in the cores may render them highly vulnerable to damage from severe weather and other disasters. As such, protection of these assets and the ability to recover from a disaster is increasingly critical to the mission and success of the institution. Therefore, cores should develop and implement both disaster and business continuity plans and be an integral part of the institution's overall plans. Here we provide an overview of key elements required for core disaster and business continuity plans, guidance, and tools for developing these plans, and real-life lessons learned at a large research institution in the aftermath of Superstorm Sandy.

VERAIn

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simunovic, Srdjan

2015-02-16

CASL's modeling and simulation technology, the Virtual Environment for Reactor Applications (VERA), incorporates coupled physics and science-based models, state-of-the-art numerical methods, modern computational science, integrated uncertainty quantification (UQ) and validation against data from operating pressurized water reactors (PWRs), single-effect experiments, and integral tests. The computational simulation component of VERA is the VERA Core Simulator (VERA-CS). The core simulator is the specific collection of multi-physics computer codes used to model and deplete a LWR core over multiple cycles. The core simulator has a single common input file that drives all of the different physics codes. The parser code, VERAIn, converts VERAmore » Input into an XML file that is used as input to different VERA codes.« less

Simulation of Fast Neutronics in an Accelerator-Driven Sub-Critical Core

NASA Astrophysics Data System (ADS)

Gwyn Rosaire, C.; Sattarov, Akhdiyor; McIntyre, Peter; Tsvetkov, Pavel

2011-10-01

Accelerator-driven subcritical fission in a molten salt core (ADSMS) is being developed as a technology for green nuclear power. ADSMS burns its fertile fuel to completion, it cannot melt down, and it destroys long-lived minor actinides. The ADSMS core consists of a vessel filled with a molten salt eutectic of UCl3 and NaCl. The fast neutronics of ADSMS makes possible two unique benefits: isobreeding, a steady-state equilibrium in which ^238U is bred to ^239Pu and the ^239Pu fissions, and destruction of minor actinides, in which fission of the intermediary nuclides dominates of breeding. Results of simulations of the fast neutronics in the ADSMS core will be presented.

Architecture, Design and Implementation of RC64, a Many-Core High-Performance DSP for Space Applications

NASA Astrophysics Data System (ADS)

Ginosar, Ran; Aviely, Peleg; Liran, Tuvia; Alon, Dov; Dobkin, Reuven; Goldberg, Michael

2013-08-01

RC64, a novel 64-core many-core signal processing chip targets DSP performance of 12.8 GIPS, 100 GOPS and 12.8 single precision GFLOS while dissipating only 3 Watts. RC64 employs advanced DSP cores, a multi-bank shared memory and a hardware scheduler, supports DDR2 memory and communicates over five proprietary 6.4 Gbps channels. The programming model employs sequential fine-grain tasks and a separate task map to define task dependencies. RC64 is implemented as a 200 MHz ASIC on Tower 130nm CMOS technology, assembled in hermetically sealed ceramic QFP package and qualified to the highest space standards.

Progress technology in microencapsulation methods for cell therapy.

PubMed

Rabanel, Jean-Michel; Banquy, Xavier; Zouaoui, Hamza; Mokhtar, Mohamed; Hildgen, Patrice

2009-01-01

Cell encapsulation in microcapsules allows the in situ delivery of secreted proteins to treat different pathological conditions. Spherical microcapsules offer optimal surface-to-volume ratio for protein and nutrient diffusion, and thus, cell viability. This technology permits cell survival along with protein secretion activity upon appropriate host stimuli without the deleterious effects of immunosuppressant drugs. Microcapsules can be classified in 3 categories: matrix-core/shell microcapsules, liquid-core/shell microcapsules, and cells-core/shell microcapsules (or conformal coating). Many preparation techniques using natural or synthetic polymers as well as inorganic compounds have been reported. Matrix-core/shell microcapsules in which cells are hydrogel-embedded, exemplified by alginates capsule, is by far the most studied method. Numerous refinement of the technique have been proposed over the years such as better material characterization and purification, improvements in microbead generation methods, and new microbeads coating techniques. Other approaches, based on liquid-core capsules showed improved protein production and increased cell survival. But aside those more traditional techniques, new techniques are emerging in response to shortcomings of existing methods. More recently, direct cell aggregate coating have been proposed to minimize membrane thickness and implants size. Microcapsule performances are largely dictated by the physicochemical properties of the materials and the preparation techniques employed. Despite numerous promising pre-clinical results, at the present time each methods proposed need further improvements before reaching the clinical phase. (c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.

[Application of digital earth technology in research of traditional Chinese medicine resources].

PubMed

Liu, Jinxin; Liu, Xinxin; Gao, Lu; Wei, Yingqin; Meng, Fanyun; Wang, Yongyan

2011-02-01

This paper describes the digital earth technology and its core technology-"3S" integration technology. The advance and promotion of the "3S" technology provide more favorable means and technical support for Chinese medicine resources survey, evaluation and appropriate zoning. Grid is a mature and popular technology that can connect all kinds of information resources. The author sums up the application of digital earth technology in the research of traditional Chinese medicine resources in recent years, and proposes the new method and technical route of investigation in traditional Chinese medicine resources, traditional Chinese medicine zoning and suitability assessment by combining the digital earth technology and grid.

Core Noise - Increasing Importance

NASA Technical Reports Server (NTRS)

Hultgren, Lennart S.

2011-01-01

This presentation is a technical summary of and outlook for NASA-internal and NASA-sponsored external research on core (combustor and turbine) noise funded by the Fundamental Aeronautics Program Subsonic Fixed Wing (SFW) Project. Sections of the presentation cover: the SFW system-level noise metrics for the 2015, 2020, and 2025 timeframes; turbofan design trends and their aeroacoustic implications; the emerging importance of core noise and its relevance to the SFW Reduced-Perceived-Noise Technical Challenge; and the current research activities in the core-noise area, with additional details given about the development of a high-fidelity combustor-noise prediction capability as well as activities supporting the development of improved reduced-order, physics-based models for combustor-noise prediction. The need for benchmark data for validation of high-fidelity and modeling work and the value of a potential future diagnostic facility for testing of core-noise-reduction concepts are indicated. The NASA Fundamental Aeronautics Program has the principal objective of overcoming today's national challenges in air transportation. The SFW Reduced-Perceived-Noise Technical Challenge aims to develop concepts and technologies to dramatically reduce the perceived aircraft noise outside of airport boundaries. This reduction of aircraft noise is critical to enabling the anticipated large increase in future air traffic. Noise generated in the jet engine core, by sources such as the compressor, combustor, and turbine, can be a significant contribution to the overall noise signature at low-power conditions, typical of approach flight. At high engine power during takeoff, jet and fan noise have traditionally dominated over core noise. However, current design trends and expected technological advances in engine-cycle design as well as noise-reduction methods are likely to reduce non-core noise even at engine-power points higher than approach. In addition, future low-emission combustor designs could increase the combustion-noise component. The trend towards high-power-density cores also means that the noise generated in the low-pressure turbine will likely increase. Consequently, the combined result from these emerging changes will be to elevate the overall importance of turbomachinery core noise, which will need to be addressed in order to meet future noise goals.

77 FR 24933 - Notice of Proposed Information Collection Requests; Office of the Secretary; Race to the Top...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... on their progress in the four core education reform areas and in Science, Technology, Engineering..., and ensuring student preparation for success in college and careers; and implementing ambitious plans... reform areas and in Science, Technology, Engineering, and Mathematics. This reporting includes narrative...

Incorporating Podcasting and Blogging into a Core Task for ESOL Teacher Candidates

ERIC Educational Resources Information Center

Kim, Deoksoon

2011-01-01

Due to innovation and globalization in education, educators of English for Speakers of Other Languages (ESOL) are encouraged to use such instructional technologies as podcasting and blogging, but studies on integrating these technologies into assignments are rare. This project revealed how ESOL teacher candidates implement instructional technology…

Advanced Education and Technology Business Plan, 2011-14

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2011

2011-01-01

Advanced Education and Technology's mission is to lead the development of a knowledge-driven future through a dynamic and integrated advanced learning and innovation system. Its core businesses are to: (1) provide strategic leadership for Campus Alberta and Alberta Innovates; and (2) engage learners, industry and the community in learning…

Brave New Workplace: Technology and Work in the New Economy.

ERIC Educational Resources Information Center

Wallace, Michael

1989-01-01

Technological innovations in factories and offices are examined in terms of 10 core issues: "high flex" workplace; control of work; organizational change; impact on skill; unemployment; educational needs and retraining; changing occupational structures; safety and health; interaction of work, leisure, and family; and quality of working life. The…

Q & A with Ed Tech Leaders: Interview with Eric Chiang

ERIC Educational Resources Information Center

Viner, Mark; Shaughnessy, Michael F.

2016-01-01

The authors present this interview with Eric Chiang, Associate Professor of Economics, Director of Instructional Technology, and Technology Director for the Online MBA Program at Florida Atlantic University. He has authored 26 peer-reviewed research publications and is the author of "CoreEconomics," an economic principles textbook now in…

This Is Not Your Grandma's Library

ERIC Educational Resources Information Center

Mader, Jan

2014-01-01

Students must understand the relevance of science, technology, engineering, and mathematics (STEM) to their everyday lives to become employable in the rapidly changing, technologically driven economy. The intent of the Common Core State Standards is to prepare students to be college-, career-, and citizenship-ready. The school libraries of today…

Building a Better Biology Lab? Testing Tablet PC Technology in a Core Laboratory Course

ERIC Educational Resources Information Center

Pryor, Gregory; Bauer, Vernon

2008-01-01

Tablet PC technology can enliven the classroom environment because it is dynamic, interactive, and "organic," relative to the rigidity of chalkboards, whiteboards, overhead projectors, and PowerPoint presentations. Unlike traditional computers, tablet PCs employ "digital linking," allowing instructors and students to freehand annotate, clarify,…

iSTEM: Learning Mathematics through Minecraft

ERIC Educational Resources Information Center

Bos, Beth; Wilder, Lucy; Cook, Marcelina; O'Donnell, Ryan

2014-01-01

The Common Core State Standards can be taught with Minecraft, an interactive creative Lego®-like game. Integrating Science, Technology, Engineering, and Mathematics (iSTEM) authors share ideas and activities that stimulate student interest in the integrated fields of science, technology, engineering, and mathematics (STEM) in K-grade 6 classrooms.

Standards-Based Technology Integration for Emergent Bilinguals

ERIC Educational Resources Information Center

Ronan, Briana

2018-01-01

Today's educators serve the United States public-school system at a time of considerable curricular, technological, and demographic change. In 2010, the Common Core State Standards in Math and English Language Arts significantly altered the curricular landscape of K-12 classrooms. On the heels of this reform came the adoptions of English…

The Digital Workforce: Update, August 2000 [and] The Digital Work Force: State Data & Rankings, September 2000.

ERIC Educational Resources Information Center

Sargent, John

The Office of Technology Policy analyzed Bureau of Labor Statistics' growth projections for the core occupational classifications of IT (information technology) workers to assess future demand in the United States. Classifications studied were computer engineers, systems analysts, computer programmers, database administrators, computer support…

The Influence of the Social Network: A Phenomenological Study of Early Adopter Consumers

ERIC Educational Resources Information Center

DeFrange Coston, Rita Louise

2009-01-01

This qualitative phenomenological study explored the lived experiences of 20 early adopter consumers, who used social networks in their decision-making process to purchase a component or complete high-technology home entertainment system. Four core themes of communication, convenience, cost, and technology emerged. Subthemes encompassed…

Implementing Technology in Flowing Wells Schools: An Analysis of Leadership.

ERIC Educational Resources Information Center

Hamilton, Marc D.

This paper discusses technology implementation at Flowing Wells, a 10-school district in Tucson, Arizona. The leadership strategies employed by the assistant superintendent, coupled with the district's core values, brought together a cadre of teachers, parents, and administrators focused on assembling the foundation of the district's technology…

Spaceborne power systems preference analyses. Volume 2: Decision analysis

NASA Technical Reports Server (NTRS)

Smith, J. H.; Feinberg, A.; Miles, R. F., Jr.

1985-01-01

Sixteen alternative spaceborne nuclear power system concepts were ranked using multiattribute decision analysis. The purpose of the ranking was to identify promising concepts for further technology development and the issues associated with such development. Four groups were interviewed to obtain preference. The four groups were: safety, systems definition and design, technology assessment, and mission analysis. The highest ranked systems were the heat-pipe thermoelectric systems, heat-pipe Stirling, in-core thermionic, and liquid-metal thermoelectric systems. The next group contained the liquid-metal Stirling, heat-pipe Alkali Metal Thermoelectric Converter (AMTEC), heat-pipe Brayton, liquid-metal out-of-core thermionic, and heat-pipe Rankine systems. The least preferred systems were the liquid-metal AMTEC, heat-pipe thermophotovoltaic, liquid-metal Brayton and Rankine, and gas-cooled Brayton. The three nonheat-pipe technologies selected matched the top three nonheat-pipe systems ranked by this study.

The University of Kansas High-Throughput Screening laboratory. Part I: meeting drug-discovery needs in the heartland of America with entrepreneurial flair.

PubMed

McDonald, Peter R; Roy, Anuradha; Chaguturu, Rathnam

2011-05-01

The University of Kansas High-Throughput Screening (KU HTS) core is a state-of-the-art drug-discovery facility with an entrepreneurial open-service policy, which provides centralized resources supporting public- and private-sector research initiatives. The KU HTS core applies pharmaceutical industry project-management principles in an academic setting by bringing together multidisciplinary teams to fill critical scientific and technology gaps, using an experienced team of industry-trained researchers and project managers. The KU HTS proactively engages in supporting grant applications for extramural funding, intellectual-property management and technology transfer. The KU HTS staff further provides educational opportunities for the KU faculty and students to learn cutting-edge technologies in drug-discovery platforms through seminars, workshops, internships and course teaching. This is the first instalment of a two-part contribution from the KU HTS laboratory.

Development Status of the Advanced Life Support On-Line Project Information System

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Hogan, John A.; Cavazzoni, Jim; Brodbeck, Christina; Morrow, Rich; Ho, Michael; Kaehms, Bob; Whitaker, Dawn R.

2005-01-01

The Advanced Life Support Program has recently accelerated an effort to develop an On-line Project Information System (OPIS) for research project and technology development data centralization and sharing. The core functionality of OPIS will launch in October of 2005. This paper presents the current OPIS development status. OPIS core functionality involves a Web-based annual solicitation of project and technology data directly from ALS Principal Investigators (PIS) through customized data collection forms. Data provided by PIs will be reviewed by a Technical Task Monitor (TTM) before posting the information to OPIS for ALS Community viewing via the Web. The data will be stored in an object-oriented relational database (created in MySQL(R)) located on a secure server at NASA ARC. Upon launch, OPIS can be utilized by Managers to identify research and technology development gaps and to assess task performance. Analysts can employ OPIS to obtain.

Subsurface Sample Acquisition and Transfer Systems (SSATS)

NASA Astrophysics Data System (ADS)

Rafeek, S.; Gorevan, S. P.; Kong, K. Y.

2001-01-01

In the exploration of planets and small bodies, scientists will need the services of a deep drilling and material handling system to not only obtain the samples necessary for analyses but also to precisely transfer and deposit those samples in in-situ instruments on board a landed craft or rover. The technology for such a deep sampling system as the SSATS is currently been developed by Honeybee Robotics through a PIDDP effort. The SSATS has its foundation in a one-meter prototype (SATM) drill that was developed under the New Millenium Program for ST4/Champollion. Additionally the SSATS includes relevant coring technology form a coring drill (Athena Mini-Corer) developed for the Mars Sample Return Mission. These highly developed technologies along with the current PIDDP effort, is combined to produce a sampling system that can acquire and transfer samples from various depths. Additional information is contained in the original extended abstract.

Core-shell Au-Pd nanoparticles as cathode catalysts for microbial fuel cell applications

PubMed Central

Yang, Gaixiu; Chen, Dong; Lv, Pengmei; Kong, Xiaoying; Sun, Yongming; Wang, Zhongming; Yuan, Zhenhong; Liu, Hui; Yang, Jun

2016-01-01

Bimetallic nanoparticles with core-shell structures usually display enhanced catalytic properties due to the lattice strain created between the core and shell regions. In this study, we demonstrate the application of bimetallic Au-Pd nanoparticles with an Au core and a thin Pd shell as cathode catalysts in microbial fuel cells, which represent a promising technology for wastewater treatment, while directly generating electrical energy. In specific, in comparison with the hollow structured Pt nanoparticles, a benchmark for the electrocatalysis, the bimetallic core-shell Au-Pd nanoparticles are found to have superior activity and stability for oxygen reduction reaction in a neutral condition due to the strong electronic interaction and lattice strain effect between the Au core and the Pd shell domains. The maximum power density generated in a membraneless single-chamber microbial fuel cell running on wastewater with core-shell Au-Pd as cathode catalysts is ca. 16.0 W m−3 and remains stable over 150 days, clearly illustrating the potential of core-shell nanostructures in the applications of microbial fuel cells. PMID:27734945

Photonic crystal fiber technology for compact fiber-delivered high-power ultrafast fiber lasers

NASA Astrophysics Data System (ADS)

Triches, Marco; Michieletto, Mattia; Johansen, Mette M.; Jakobsen, Christian; Olesen, Anders S.; Papior, Sidsel R.; Kristensen, Torben; Bondue, Magalie; Weirich, Johannes; Alkeskjold, Thomas T.

2018-02-01

Photonic crystal fiber (PCF) technology has radically impacted the scientific and industrial ultrafast laser market. Reducing platform dimensions are important to decrease cost and footprint while maintaining high optical efficiency. We present our recent work on short 85 μm core ROD-type fiber amplifiers that maintain single-mode performance and excellent beam quality. Robust long-term performance at 100 W average power and 250 kW peak power in 20 ps pulses at 1030 nm wavelength is presented, exceeding 500 h with stable performance in terms of both polarization and power. In addition, we present our recent results on hollow-core ultrafast fiber delivery maintaining high beam quality and polarization purity.

FIBER AND INTEGRATED OPTICS: Anisotropic waveguides with an elliptic stress-inducing cladding and a circular core

NASA Astrophysics Data System (ADS)

Arutyunyan, Z. É.; Grudinin, A. B.; Gur'yanov, A. N.; Gusovskiĭ, D. D.; Dianov, Evgenii M.; Ignat'ev, S. V.; Smirnov, O. B.

1990-10-01

A technology of fabrication of anisotropic single-mode fiber waveguides with an elliptic stress-inducing cladding and a circular core was developed. This technology was used to make fiber waveguides with a birefringence (1-3) × 10 - 4, a coefficient representing the coupling between the polarization modes h = (5-7) × 10 - 5 m - 1, and optical losses a = 0.5 dB/km in the vicinity of 1.6 μm. A comparison was made of the experimental data with the results of a theoretical analysis. It was found that certain mechanisms restricted the ability of these waveguides to maintain a constant polarization of the injected linearly polarized radiation.

Optimization design of turbo-expander gas bearing for a 500W helium refrigerator

NASA Astrophysics Data System (ADS)

Li, S. S.; Fu, B.; Y Zhang, Q.

2017-12-01

Turbo-expander is the core machinery of the helium refrigerator. Bearing as the supporting element is the core technology to impact the design of turbo-expander. The perfect design and performance study for the gas bearing are essential to ensure the stability of turbo-expander. In this paper, numerical simulation is used to analyze the performance of gas bearing for a 500W helium refrigerator turbine, and the optimization design of the gas bearing has been completed. And the results of the gas bearing optimization have a guiding role in the processing technology. Finally, the turbine experiments verify that the gas bearing has good performance, and ensure the stable operation of the turbine.

Effect of metal catalyst on the mechanism of hydrogen spillover in three-dimensional covalent-organic frameworks

NASA Astrophysics Data System (ADS)

Liu, Xiu-Ying; Yu, Jing-Xin; Li, Xiao-Dong; Liu, Gui-Cheng; Li, Xiao-Feng; Lee, Joong-Kee

2017-02-01

Not Available Project supported by the National Natural Science Foundation of China (Grant Nos. 11304079, 11304140, 11404094, and 11504088), the China National Scholarship Foundation (Grant No. 201508410255), the Foundation for Young Core Teachers of Higher Education Institutions of Henan Province of China, the Foundation for Young Core Teachers of Henan University of Technology in China, the Korea Institute of Science and Technology (KIST) Institutional Program (Grant No. 2E26291) and Flag Program (Grant No. 2E26300), and the Research Grants of NRF funded by the National Research Foundation under the Ministry of Science, ICT & Future, Korea (Grant No. NRF-2015H1D3A1036078).

Social Media, Big Data, and Mental Health: Current Advances and Ethical Implications

PubMed Central

Conway, Mike; O’Connor, Daniel

2016-01-01

Mental health (including substance abuse) is the fifth greatest contributor to the global burden of disease, with an economic cost estimated to be US $2.5 trillion in 2010, and expected to double by 2030. Developing information systems to support and strengthen population-level mental health monitoring forms a core part of the World Health Organization’s Comprehensive Action Plan 2013–2020. In this paper, we review recent work that utilizes social media “big data” in conjunction with associated technologies like natural language processing and machine learning to address pressing problems in population-level mental health surveillance and research, focusing both on technological advances and core ethical challenges. PMID:27042689

Tandem Fusion of Hepatitis B Core Antigen Allows Assembly of Virus-Like Particles in Bacteria and Plants with Enhanced Capacity to Accommodate Foreign Proteins

PubMed Central

Peyret, Hadrien; Gehin, Annick; Thuenemann, Eva C.; Blond, Donatienne; El Turabi, Aadil; Beales, Lucy; Clarke, Dean; Gilbert, Robert J. C.; Fry, Elizabeth E.; Stuart, David I.; Holmes, Kris; Stonehouse, Nicola J.; Whelan, Mike; Rosenberg, William; Lomonossoff, George P.; Rowlands, David J.

2015-01-01

The core protein of the hepatitis B virus, HBcAg, assembles into highly immunogenic virus-like particles (HBc VLPs) when expressed in a variety of heterologous systems. Specifically, the major insertion region (MIR) on the HBcAg protein allows the insertion of foreign sequences, which are then exposed on the tips of surface spike structures on the outside of the assembled particle. Here, we present a novel strategy which aids the display of whole proteins on the surface of HBc particles. This strategy, named tandem core, is based on the production of the HBcAg dimer as a single polypeptide chain by tandem fusion of two HBcAg open reading frames. This allows the insertion of large heterologous sequences in only one of the two MIRs in each spike, without compromising VLP formation. We present the use of tandem core technology in both plant and bacterial expression systems. The results show that tandem core particles can be produced with unmodified MIRs, or with one MIR in each tandem dimer modified to contain the entire sequence of GFP or of a camelid nanobody. Both inserted proteins are correctly folded and the nanobody fused to the surface of the tandem core particle (which we name tandibody) retains the ability to bind to its cognate antigen. This technology paves the way for the display of natively folded proteins on the surface of HBc particles either through direct fusion or through non-covalent attachment via a nanobody. PMID:25830365

Managing Geothermal Exploratory Drilling Risks Drilling Geothermal Exploration and Delineation Wells with Small-Footprint Highly Portable Diamond Core Drills

NASA Astrophysics Data System (ADS)

Tuttle, J.; Listi, R.; Combs, J.; Welch, V.; Reilly, S.

2012-12-01

Small hydraulic core rigs are highly portable (truck or scow-mounted), and have recently been used for geothermal exploration in areas such as Nevada, California, the Caribbean Islands, Central and South America and elsewhere. Drilling with slim diameter core rod below 7,000' is common, with continuous core recovery providing native-state geological information to aid in identifying the resource characteristics and boundaries; this is a highly cost-effective process. Benefits associated with this innovative exploration and delineation technology includes the following: Low initial Capital Equipment Cost and consumables costs Small Footprint, reducing location and road construction, and cleanup costs Supporting drill rod (10'/3meter) and tools are relatively low weight and easily shipped Speed of Mobilization and rig up Reduced requirements for support equipment (cranes, backhoes, personnel, etc) Small mud systems and cementing requirements Continuous, simplified coring capability Depth ratings comparable to that of large rotary rigs (up to ~10,000'+) Remote/small-location accessible (flown into remote areas or shipped in overseas containers) Can be scow or truck-mounted This technical presentation's primary goal is to share the technology of utilizing small, highly portable hydraulic coring rigs to provide exploratory drilling (and in some cases, production drilling) for geothermal projects. Significant cost and operational benefits are possible for the Geothermal Operator, especially for those who are pursuing projects in remote locations or countries, or in areas that are either inaccessible or in which a small footprint is required. John D. Tuttle Sinclair Well Products jtuttle@sinclairwp.com

Progress towards autonomous, intelligent systems

NASA Technical Reports Server (NTRS)

Lum, Henry; Heer, Ewald

1987-01-01

An aggressive program has been initiated to develop, integrate, and implement autonomous systems technologies starting with today's expert systems and evolving to autonomous, intelligent systems by the end of the 1990s. This program includes core technology developments and demonstration projects for technology evaluation and validation. This paper discusses key operational frameworks in the content of systems autonomy applications and then identifies major technological challenges, primarily in artificial intelligence areas. Program content and progress made towards critical technologies and demonstrations that have been initiated to achieve the required future capabilities in the year 2000 era are discussed.

[The technological innovation strategy for quality control of Chinese medicine based on Big Data].

PubMed

Li, Zhen-hao; Qian, Zhong-zhi; Cheng, Yi-yu

2015-09-01

The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

Advanced CO 2 Leakage Mitigation using Engineered Biomineralization Sealing Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spangler, Lee; Cunningham, Alfred; Phillips, Adrienne

2015-03-31

This research project addresses one of the goals of the DOE Carbon Sequestration Program (CSP). The CSP core R&D effort is driven by technology and is accomplished through laboratory and pilot scale research aimed at new technologies for greenhouse gas mitigation. Accordingly, this project was directed at developing novel technologies for mitigating unwanted upward leakage of carbon dioxide (CO 2) injected into the subsurface as part of carbon capture and storage (CCS) activities. The technology developed by way of this research project is referred to as microbially induced calcite precipitation (MICP).

Understanding Science and Technology Interactions Through Ocean Science Exploration: A Summer Course for Science Teachers

NASA Astrophysics Data System (ADS)

Baldauf, J.; Denton, J.

2003-12-01

In order to replenish the national supply of science and mathematics educators, the National Science Foundation has supported the formation of the Center for Applications of Information Technology in the Teaching and Learning of Science (ITS) at Texas A&M University. The center staff and affiliated faculty work to change in fundamental ways the culture and relationships among scientists, educational researchers, and teachers. ITS is a partnership among the colleges of education, science, geosciences, agriculture and life science at Texas A&M University. Participants (teachers and graduate students) investigate how science is done and how science is taught and learned; how that learning is assessed, and how scholarly networks among all engaged in this work can be encouraged. While the center can offer graduate degrees most students apply as non-degree seekers. ITS participants are schooled on classroom technology applications, experience working on project teams, and access very current research work being conducted by scientists. ITS offers a certificate program consisting of two summer sessions over two years that results in 12 hours of graduate credit that can be applied to a degree. Interdisciplinary project teams spend three intense weeks connecting current research to classroom practices. During the past summer with the beginning of the two-year sequence, a course was implemented that introduced secondary teachers to Ocean Drilling Program (ODP) contributions to major earth science themes, using core and logging data, engineering (technology) tools and processes. Information Technology classroom applications were enhanced through hands-on laboratory exercises, web resources and online databases. The course was structured around the following objectives. 1. Distinguish the purpose and goals of the Ocean Drilling Program from the Integrated Ocean Drilling Program and describe the comparable science themes (ocean circulation, marine sedimentation, climate history, sea level change and geological time). This objective will be achieved by correctly answering 8 of 10 multiple choice items on course posttest on science themes of ODP/IODP. 2. Describe the technical tools and processes for determining sea level history by preparing and presenting a multimedia presentation on coring. 3. Describe the processes for describing a drill core and apply those processes to core samples from Leg 194 by developing a laboratory analysis report on core samples based on protocol for analyzing cores. 4. Explain the distinguishing features of scientific from industrial coring processes by developing a paper that contrasts scientific from industrial coring processes. 5. Describe the substructure of the ocean basin and the scientific tools (equipment and processes) used to explore this substructure by preparing and presenting a multimedia presentation on bore hole data interpretation. 6. Analyze and interpret data sets from a bore hole by developing a laboratory analysis report on bore-hole data. Student performance data for objectives indicate a 16% average positive change on the science themes addressed in instruction related to objective one occurred. Similarly, a 12% average positive change occurred on science education topics related to earth science among the students in this class. Ongoing contact between faculty members during the academic year is planned as these summer participants engage in implementing IT interventions and professional development experiences based on ocean science data experienced in the summer experience.

A comprehensive inventory of the ship traffic exhaust emissions in the Baltic Sea from 2006 to 2009.

PubMed

Jalkanen, Jukka-Pekka; Johansson, Lasse; Kukkonen, Jaakko

2014-04-01

This study addresses the exhaust emissions of CO₂, NO(x), SO(x), CO, and PM(2.5) originated from Baltic Sea shipping in 2006-2009. Numerical results have been computed using the Ship Traffic Emissions Assessment Model. This model is based on the messages of the automatic identification system (AIS), which enable the positioning of ships with a high spatial resolution. The NO(x) emissions in 2009 were approximately 7 % higher than in 2006, despite the economic recession. However, the SO(x) emissions in 2009 were approximately 14 % lower, when compared to those in 2006, mainly caused by the fuel requirements of the SO(x) emission control area (SECA) which became effective in May 2006, but affected also by changes in ship activity. Results are presented on the differential geographic distribution of shipping emissions before (Jan-April 2006) and after (Jan-April 2009) the SECA regulations. The predicted NO(x) emissions in 2009 substantially exceeded the emissions in 2006 along major ship routes and at numerous harbors, mostly due to the continuous increase in the number of small vessels that use AIS transmitters. Although the SO(x) emissions have been reduced in 2009 in most major ship routes, these have increased in the vicinity of some harbors and on some densely trafficked routes. A seasonal variation of emissions is also presented, as well as the distribution of emissions in terms of vessel flag state, type, and weight.

Underwater Threat Source Localization: Processing Sensor Network TDOAs with a Terascale Optical Core Device

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barhen, Jacob; Imam, Neena

2007-01-01

Revolutionary computing technologies are defined in terms of technological breakthroughs, which leapfrog over near-term projected advances in conventional hardware and software to produce paradigm shifts in computational science. For underwater threat source localization using information provided by a dynamical sensor network, one of the most promising computational advances builds upon the emergence of digital optical-core devices. In this article, we present initial results of sensor network calculations that focus on the concept of signal wavefront time-difference-of-arrival (TDOA). The corresponding algorithms are implemented on the EnLight processing platform recently introduced by Lenslet Laboratories. This tera-scale digital optical core processor is optimizedmore » for array operations, which it performs in a fixed-point-arithmetic architecture. Our results (i) illustrate the ability to reach the required accuracy in the TDOA computation, and (ii) demonstrate that a considerable speed-up can be achieved when using the EnLight 64a prototype processor as compared to a dual Intel XeonTM processor.« less

Development of Technologies on Innovative-Simplified Nuclear Power Plant using High-Efficiency Steam Injectors

NASA Astrophysics Data System (ADS)

Ohmori, Shuichi; Narabayashi, Tadashi; Mori, Michitsugu; Iwaki, Chikako; Asanuma, Yutaka; Goto, Shoji

A Steam Injector (SI) is a simple, compact and passive pump and also acts as a high-performance direct-contact heater. This provides SI with capability to serve also as a direct-contact feed-water heater that heats up feed-water by using extracted steam from turbine. Our technology development aims to significantly simplify equipment and reduce physical quantities by applying "High-Efficiency SI", which are applicable to a wide range of operation regimes beyond the performance and applicable range of existing SIs and enables unprecedented multistage and parallel operation, to the low-pressure feed-water heaters and Emergency Core Cooling System of nuclear power plants, as well as achieve high inherent safety to prevent severe accidents by keeping the core covered with water (a Severe Accident-Free Concept). This paper describes the results of the endurance and performance tests of low-pressure SIs for feed-water heaters with Jet-deaerator and core injection system.

Determination of Magnetic Parameters of Maghemite (γ-Fe2O3) Core-Shell Nanoparticles from Nonlinear Magnetic Susceptibility Measurements

NASA Astrophysics Data System (ADS)

Syvorotka, Ihor I.; Pavlyk, Lyubomyr P.; Ubizskii, Sergii B.; Buryy, Oleg A.; Savytskyy, Hrygoriy V.; Mitina, Nataliya Y.; Zaichenko, Oleksandr S.

2017-04-01

Method of determining of magnetic moment and size from measurements of dependence of the nonlinear magnetic susceptibility upon magnetic field is proposed, substantiated and tested for superparamagnetic nanoparticles (SPNP) of the "magnetic core-polymer shell" type which are widely used in biomedical technologies. The model of the induction response of the SPNP ensemble on the combined action of the magnetic harmonic excitation field and permanent bias field is built, and the analysis of possible ways to determine the magnetic moment and size of the nanoparticles as well as the parameters of the distribution of these variables is performed. Experimental verification of the proposed method was implemented on samples of SPNP with maghemite core in dry form as well as in colloidal systems. The results have been compared with the data obtained by other methods. Advantages of the proposed method are analyzed and discussed, particularly in terms of its suitability for routine express testing of SPNP for biomedical technology.

A Brief Overview of NASA Glenn Research Center Sensor and Electronics Activities

NASA Technical Reports Server (NTRS)

Hunter, Gary W.

2012-01-01

Aerospace applications require a range of sensing technologies. There is a range of sensor and sensor system technologies being developed using microfabrication and micromachining technology to form smart sensor systems and intelligent microsystems. Drive system intelligence to the local (sensor) level -- distributed smart sensor systems. Sensor and sensor system development examples: (1) Thin-film physical sensors (2) High temperature electronics and wireless (3) "lick and stick" technology. NASA GRC is a world leader in aerospace sensor technology with a broad range of development and application experience. Core microsystems technology applicable to a range of application environmentS.

Use of thermal imagery for estimation of core body temperature during precooling, exertion, and recovery in wildland firefighter protective clothing.

PubMed

Bourlai, Thirimachos; Pryor, Riana R; Suyama, Joe; Reis, Steven E; Hostler, David

2012-01-01

Monitoring core body temperature to identify heat stress in first responders and in individuals participating in mass gatherings (e.g., marathons) is difficult. This study utilized high-sensitivity thermal imaging technology to predict the core temperature of human subjects at a distance while performing simulated field operations wearing thermal protective garments. Six male subjects participating in a study of precooling prior to exertion in wildland firefighter thermal protective clothing had thermal images of the face captured with a high-resolution thermal imaging camera concomitant with measures of core and skin temperature before, during, and after treadmill exercise in a heated room. Correlations and measures of agreement between core temperature and thermal imaging-based temperature were performed. The subjects walked an average (± standard deviation) of 42.6 (±5.9) minutes and a distance of 4.2 (±0.6) km on the treadmill. Mean heart rate at the end of exercise was 152 (±33) bpm and core body temperature at the end of exercise was 38.3°C (±0.7°C). A visual relationship and a strong correlation between core temperature and thermal imaging of the face were identified in all subjects, with the closest relationship and best agreement occurring during exercise. The Bland-Altman test of agreement during exercise revealed the majority of measurement pairs to be within two standard deviations of the measured temperature. High-resolution thermal imaging in the middle-wave infrared spectrum (3-5 μm) can be used to accurately estimate core body temperature during exertion in a hot room while participants are wearing wildland firefighting garments. Although this technology is promising, it must be refined. Using alternative measurement sites such as the skin over the carotid artery, using multiple measurement sites, or adding pulse detection may improve the estimation of body temperature by thermal imagery.

[Health personnel assessment about medical order entry systems of pharmacologic treatments in hospitalized patients].

PubMed

Villamañán, E; Larrubia, Y; Ruano, M; Moro, M; Sierra, A; Pérez, E; Herrero, A; Álvarez-Sala, R

2013-01-01

to evaluate health personnel perceptions about medical order entry systems concerning the effect on workflow, medication errors risk and assessment of its potential advantages. A cross-section opinion interview was conducted in a tertiary care hospital. Questionnaire consisted of three sections: perception of its effect on workflow, influence on medication error risk and assessment of potential advantages. We also asked them to assess drawbacks and provide suggestions about this prescription system. 76 health professionals were interviewed (58 physicians, 9 pharmacists and 9 nurses). They were satisfied mainly due to decrease the workload (85.5%; IC 95%: 75.58-92.55). They thought that the main characteristics that contribute to reduce medication errors are clinical decision supports related to predefined aspects which the program provided by default. Among potential benefits of medical order entry systems, legibility and warnings triggered by the program (98.7%; IC 95%: 92.90-99.97 and 97,4%; IC 95%: 90.81-99.68 respectively) were the most valuable. High technology dependence, IT failures and lack of infrastructure and medication therapy discontinuities at times of transition between different hospitals' units were the main drawbacks considered. The most repeated suggestion was related to the improvement of links between other health informatics applications used in the hospital. health personnel were highly satisfied with the CPOE system, which is considered to be effective and safe. Technology dependence and IT failures were the main disadvantages reported. According to them, a greater coordination and unification of all software applications available in the hospital would be desirable. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Subwavelength core/shell cylindrical nanostructures for novel plasmonic and metamaterial devices

NASA Astrophysics Data System (ADS)

Kim, Kyoung-Ho; No, You-Shin

2017-12-01

In this review, we introduce novel plasmonic and metamaterial devices based on one-dimensional subwavelength nanostructures with cylindrical symmetry. Individual single devices with semiconductor/metal core/shell or dielectric/metal core/multi-shell structures experience strong light-matter interaction and yield unique optical properties with a variety of functions, e.g., invisibility cloaking, super-scattering/super-absorption, enhanced luminescence and nonlinear optical activities, and deep subwavelength-scale optical waveguiding. We describe the rational design of core/shell cylindrical nanostructures and the proper choice of appropriate constituent materials, which allow the efficient manipulation of electromagnetic waves and help to overcome the limitations of conventional homogeneous nanostructures. The recent developments of bottom-up synthesis combined with the top-down fabrication technologies for the practical applications and the experimental realizations of 1D subwavelength core/shell nanostructure devices are briefly discussed.

Discussion on the management system technology implementation of multimedia classrooms in the digital campus

NASA Astrophysics Data System (ADS)

Wang, Bo

2018-04-01

Based on the digitized information and network, digital campus is an integration of teaching, management, science and research, life service and technology service, and it is one of the current mainstream construction form of campus function. This paper regarded the "mobile computing" core digital environment construction development as the background, explored the multiple management system technology content design and achievement of multimedia classrooms in digital campus and scientifically proved the technology superiority of management system.

Breaking through barriers: using technology to address executive function weaknesses and improve student achievement.

PubMed

Schwartz, David M

2014-01-01

Assistive technologies provide significant capabilities for improving student achievement. Improved accessibility, cost, and diversity of applications make integration of technology a powerful tool to compensate for executive function weaknesses and deficits and their impact on student performance, learning, and achievement. These tools can be used to compensate for decreased working memory, poor time management, poor planning and organization, poor initiation, and decreased memory. Assistive technology provides mechanisms to assist students with diverse strengths and weaknesses in mastering core curricular concepts.

Research of the self-healing technologies in the optical communication network of distribution automation

NASA Astrophysics Data System (ADS)

Wang, Hao; Zhong, Guoxin

2018-03-01

Optical communication network is the mainstream technique of the communication networks for distribution automation, and self-healing technologies can improve the in reliability of the optical communication networks significantly. This paper discussed the technical characteristics and application scenarios of several network self-healing technologies in the access layer, the backbone layer and the core layer of the optical communication networks for distribution automation. On the base of the contrastive analysis, this paper gives an application suggestion of these self-healing technologies.

HOSPITAL MANAGERS' NEED FOR INFORMATION ON HEALTH TECHNOLOGY INVESTMENTS.

PubMed

Ølholm, Anne Mette; Kidholm, Kristian; Birk-Olsen, Mette; Christensen, Janne Buck

2015-01-01

There is growing interest in implementing hospital-based health technology assessment (HB-HTA) as a tool to facilitate decision making based on a systematic and multidisciplinary assessment of evidence. However, the decision-making process, including the informational needs of hospital decision makers, is not well described. The objective was to review empirical studies analysing the information that hospital decision makers need when deciding about health technology (HT) investments. A systematic review of empirical studies published in English or Danish from 2000 to 2012 was carried out. The literature was assessed by two reviewers working independently. The identified informational needs were assessed with regard to their agreement with the nine domains of EUnetHTA's Core Model. A total of 2,689 articles were identified and assessed. The review process resulted in 14 relevant studies containing 74 types of information that hospital decision makers found relevant. In addition to information covered by the Core Model, other types of information dealing with political and strategic aspects were identified. The most frequently mentioned types of information in the literature related to clinical, economic and political/strategic aspects. Legal, social, and ethical aspects were seldom considered most important. Hospital decision makers are able to describe their information needs when deciding on HT investments. The different types of information were not of equal importance to hospital decision makers, however, and full agreement between EUnetHTA's Core Model and the hospital decision-makers' informational needs was not observed. They also need information on political and strategic aspects not covered by the Core Model.

A Neglected Opportunity: Entrepreneurship Education in the Lower High School Curricula for Technology in South Africa and Botswana

ERIC Educational Resources Information Center

du Toit, Adri; Gaotlhobogwe, Mike

2018-01-01

Technology is a school subject that forms part of the compulsory curriculum for high school learners in South Africa, and is a core theme in the subject Design and Technology in Botswana high schools. Knowledge and production skills acquired in the subject are applied to solve real-life problems consistent with the steps of the design process. The…

Music Students' Perception of the Use of Multi-Media Technology at the Graduate Level in Hong Kong Higher Education

ERIC Educational Resources Information Center

Ho, Wai-Chung

2007-01-01

The core purpose of this paper is to draw together research issues and concrete problems with the use of multimedia technology at the graduate level in higher music education by examining one university's responses to the challenges posed by the use of multimedia technology as a teaching and learning aid for music education. Between June and July…

How Well Do Engineering Students Retain Core Mathematical Knowledge after a Series of High Threshold Online Mathematics Tests?

ERIC Educational Resources Information Center

Carr, Michael; Prendergast, Mark; Breen, Cormac; Faulkner, Fiona

2017-01-01

In the Dublin Institute of Technology, high threshold core skills assessments are run in mathematics for third-year engineering students. Such tests require students to reach a threshold of 90% on a multiple choice test based on a randomized question bank. The material covered by the test consists of the more important aspects of undergraduate…

2013 R&D 100 Award: New tech could mean more power for fiber lasers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dawson, Jay

2014-04-03

An LLNL team of six physicists has developed a new technology that is a stepping stone to enable some of the limitations on high-power fiber lasers to be overcome. Their technology, dubbed "Efficient Mode-Converters for High-Power Fiber Amplifiers," allows the power of fiber lasers to be increased while maintaining high beam quality. Currently, fiber lasers are used in machining, on factory floors and in a number of defense applications and can produce tens of kilowatts of power.The conventional fiber laser design features a circular core and has fundamental limitations that make it impractical to allow higher laser power unless themore » core area is increased. LLNL researchers have pioneered a design to increase the laser's core area along the axis of the ribbon fiber. Their design makes it difficult to use a conventional laser beam, so the LLNL team converted the beam into a profile that propagates into the ribbon fiber and is converted back once it is amplified. The use of this LLNL technology will permit the construction of higher power lasers for lower costs and increase the power of fiber lasers from tens of kilowatts of power to about 100 kilowatts and potentially even higher.« less

An underground nuclear power station using self-regulating heat-pipe controlled reactors

DOEpatents

Hampel, V.E.

1988-05-17

A nuclear reactor for generating electricity is disposed underground at the bottom of a vertical hole that can be drilled using conventional drilling technology. The primary coolant of the reactor core is the working fluid in a plurality of thermodynamically coupled heat pipes emplaced in the hole between the heat source at the bottom of the hole and heat exchange means near the surface of the earth. Additionally, the primary coolant (consisting of the working fluid in the heat pipes in the reactor core) moderates neutrons and regulates their reactivity, thus keeping the power of the reactor substantially constant. At the end of its useful life, the reactor core may be abandoned in place. Isolation from the atmosphere in case of accident or for abandonment is provided by the operation of explosive closures and mechanical valves emplaced along the hole. This invention combines technology developed and tested for small, highly efficient, space-based nuclear electric power plants with the technology of fast- acting closure mechanisms developed and used for underground testing of nuclear weapons. This invention provides a nuclear power installation which is safe from the worst conceivable reactor accident, namely, the explosion of a nuclear weapon near the ground surface of a nuclear power reactor. 5 figs.

Underground nuclear power station using self-regulating heat-pipe controlled reactors

DOEpatents

Hampel, Viktor E.

1989-01-01

A nuclear reactor for generating electricity is disposed underground at the bottom of a vertical hole that can be drilled using conventional drilling technology. The primary coolant of the reactor core is the working fluid in a plurality of thermodynamically coupled heat pipes emplaced in the hole between the heat source at the bottom of the hole and heat exchange means near the surface of the earth. Additionally, the primary coolant (consisting of the working flud in the heat pipes in the reactor core) moderates neutrons and regulates their reactivity, thus keeping the power of the reactor substantially constant. At the end of its useful life, the reactor core may be abandoned in place. Isolation from the atmosphere in case of accident or for abandonment is provided by the operation of explosive closures and mechanical valves emplaced along the hole. This invention combines technology developed and tested for small, highly efficient, space-based nuclear electric power plants with the technology of fast-acting closure mechanisms developed and used for underground testing of nuclear weapons. This invention provides a nuclear power installation which is safe from the worst conceivable reactor accident, namely, the explosion of a nuclear weapon near the ground surface of a nuclear power reactor.

Using collaborative technology to enhance pre-service teachers' pedagogical content knowledge in Science

NASA Astrophysics Data System (ADS)

Donnelly, Dermot Francis; Hume, Anne

2015-01-01

Background:Supporting pre-service teacher (PT) collaboration as a means of professional learning is a challenging but essential task for effective practice. However, teacher placements or practicums in schools, which is common practice within teacher education programmes, can often isolate PTs from sharing their experiences with each other. Further, the articulation of effective pedagogical practices by high-quality teachers is limited, restricting PTs' ability to access such professional knowledge. Purpose:This study investigates how the introduction of a collaborative technology, a wiki, may enhance existing and new opportunities for pre-service teachers' (PTs) to develop pedagogical content knowledge (PCK). Sample:Seven PT chemistry teachers of varied backgrounds participated in this study. Design and method:The PTs were learning to collaboratively formulate and document their early topic-specific teaching knowledge using a pedagogical tool known as Content Representation (CoRe) design. Once scaffolded into this process, the PTs continued and extended this collaborative work online through the introduction of a wiki. Data were collected for qualitative analysis through the CoRe artefacts, a semi-structured focus group interview, and PTs' reflective essays about their collaborative experiences representing their teaching knowledge in CoRes through the wiki. Results:Data analysis highlighted that while wiki use showed some potential for collaborative representation when participants were not face-to-face, the PTs were hesitant in critiquing each other's work. As such, the online representations remained relatively static without face-to-face interaction. However, developing artefacts online was favoured over established practice and the access to artefacts of their peers on the wiki enhanced PTs' consideration for their own PCK. Conclusion:Wikis show some potential in the hosting of CoRes, but issues in simultaneous posting and lack of chat functionality may hinder PTs' ability to easily critique each others' work. However, the PTs in this study also demonstrated a broader unwillingness to critique each other's CoRes that teacher educators need to challenge. The use of technology to support PTs' CoRes and critiquing warrants further research.

Timing of mafic magmatism in the Tapajós Province (Brazil) and implications for the evolution of the Amazon Craton: evidence from baddeleyite and zircon U Pb SHRIMP geochronology

NASA Astrophysics Data System (ADS)

Santos, João Orestes Schneider; Hartmann, Léo Afraneo; McNaughton, Neal Jesse; Fletcher, Ian Robert

2002-09-01

The precise timing and possible sources of the mafic rocks in the Amazon craton are critical for reconstruction of the Atlantica supercontinent and correlation of mafic magmatism worldwide. New SHRIMP U-Pb baddeleyite and zircon ages and the reinterpretation of 207 existing dates indicate one orogenic (Ingarana) and four postorogenic (Crepori, Cachoeira Seca, Piranhas, and Periquito) basaltic events in the Tapajós Province, south central Amazon craton. Orogenic gabbro dikes that host gold mineralization are 1893 Ma and interpreted as associated with the Ingarana gabbro intrusions of the bimodal calk-alkalic Parauari intrusive suite. The age of 1893 Ma can be used as a guide to discriminate older and mineralized orogenic dikes from younger and nonmineralized Crepori- and Cachoeira Seca-related mafic dikes. The baddeleyite U-Pb age of the postorogenic Crepori dolerite (gabbro-dolerite sills and dikes) is 1780±9 Ma, ˜150 my older than the ages provided by K-Ar. This value correlates well with the Avanavero tholeiitic intrusions in the Roraima group, in the northern part of the craton in Guyana, Venezuela, and Roraima in Brazil. Early Statherian tholeiitic magmatism was widespread not only in the Amazon craton, but also in the La Plata craton of southern South America, where it is known as the giant Piedra Alta swarm of Uruguay and the post-Trans-Amazonian dikes of Tandil in Argentina. The Cachoeira Seca troctolite represents laccoliths, Feixes, and São Domingos, whose baddeleyite U-Pb age is 1186±12 Ma, 120-150 my older than the known K-Ar ages. This age is comparable to other Stenian gabbroic rocks with alkalic affinity in the craton, such as the Seringa Formation in NE Amazonas and the basaltic flows of the Nova Floresta formation in Rondônia. Dolerite from the giant Piranhas dike swarm in the western Tapajós Province has a Middle Cambrian age (507±4 Ma, baddeleyite) and inherited zircons in the 2238-1229 Ma range. The Piranhas dikes fill extensional NNE and NE faults that are possibly related to an early rifting period before the Ordovician onset of the Amazon Basin sedimentation. Representative rocks of the Paleozoic Taiano magmatism of the northern Amazon craton were not detected in the Tapajós Province. Mesozoic dikes are widespread in the Amazon craton, related to Gondwana continental break-up with K-Ar ages in the 260-124 Ma range.

GRC-2010-C-01237

NASA Image and Video Library

2006-03-29

Fiber-Reinforced-Foam (FRF) Core Composite Sandwich Panel Concept for Advanced Composites Technologies Project - Preliminary Manufacturing Demonstration Articles for Ares V Payload Shroud Barrel Acreage Structure

GRC-2010-C-01234

NASA Image and Video Library

2006-03-29

Fiber-Reinforced-Foam (FRF) Core Composite Sandwich Panel Concept for Advanced Composites Technologies Project - Preliminary Manufacturing Demonstration Articles for Ares V Payload Shroud Barrel Acreage Structure

GRC-2010-C-01233

NASA Image and Video Library

2006-03-29

Fiber-Reinforced-Foam (FRF) Core Composite Sandwich Panel Concept for Advanced Composites Technologies Project - Preliminary Manufacturing Demonstration Articles for Ares V Payload Shroud Barrel Acreage Structure

Biofilm-induced calcium carbonate precipitation: application in the subsurface

NASA Astrophysics Data System (ADS)

Phillips, A. J.; Eldring, J.; Lauchnor, E.; Hiebert, R.; Gerlach, R.; Mitchell, A. C.; Esposito, R.; Cunningham, A. B.; Spangler, L.

2012-12-01

We have investigated mitigation strategies for sealing high permeability regions, like fractures, in the subsurface. This technology has the potential to, for example, improve the long-term security of geologically-stored carbon dioxide (CO2) by sealing fractures in cap rocks or to mitigate leakage pathways to prevent contamination of overlying aquifers from hydraulic fracturing fluids. Sealing technologies using low-viscosity fluids are advantageous since they potentially reduce the necessary injection pressures and increase the radius of influence around injection wells. In this technology, aqueous solutions and suspensions are used to promote microbially-induced mineral precipitation which can be applied in subsurface environments. To this end, a strategy was developed to twice seal a hydraulically fractured, 74 cm (2.4') diameter Boyles Sandstone core, collected in North-Central Alabama, with biofilm-induced calcium carbonate (CaCO3) precipitates under ambient pressures. Sporosarcina pasteurii biofilms were established and calcium and urea containing reagents were injected to promote saturation conditions favorable for CaCO3 precipitation followed by growth reagents to resuscitate the biofilm's ureolytic activity. Then, in order to evaluate this process at relevant deep subsurface pressures, a novel high pressure test vessel was developed to house the 74 cm diameter core under pressures as high as 96 bar (1,400 psi). After determining that no impact to the fracture permeability occurred due to increasing overburden pressure, the fractured core was sealed under subsurface relevant pressures relating to 457 meters (1,500 feet) below ground surface (44 bar (650 psi) overburden pressure). After fracture sealing under both ambient and subsurface relevant pressure conditions, the sandstone core withstood three times higher well bore pressure than during the initial fracturing event, which occurred prior to biofilm-induced CaCO3 mineralization. These studies suggest biofilm-induced CaCO3 precipitation technologies may potentially seal and strengthen high permeability regions or fractures (either natural or induced) in the subsurface. Novel high pressure test vessel to investigate biogeochemical processes under relevant subsurface scales and pressures.

A Way to Select Electrical Sheets of the Segment Stator Core Motors.

NASA Astrophysics Data System (ADS)

Enomoto, Yuji; Kitamura, Masashi; Sakai, Toshihiko; Ohara, Kouichiro

The segment stator core, high density winding coil, high-energy-product permanent magnet are indispensable technologies in the development of a compact and also high efficient motors. The conventional design method for the segment stator core mostly depended on experienced knowledge of selecting a suitable electromagnetic material, far from optimized design. Therefore, we have developed a novel design method in the selection of a suitable electromagnetic material based on the correlation evaluation between the material characteristics and motor performance. It enables the selection of suitable electromagnetic material that will meet the motor specification.

Neural simulations on multi-core architectures.

PubMed

Eichner, Hubert; Klug, Tobias; Borst, Alexander

2009-01-01

Neuroscience is witnessing increasing knowledge about the anatomy and electrophysiological properties of neurons and their connectivity, leading to an ever increasing computational complexity of neural simulations. At the same time, a rather radical change in personal computer technology emerges with the establishment of multi-cores: high-density, explicitly parallel processor architectures for both high performance as well as standard desktop computers. This work introduces strategies for the parallelization of biophysically realistic neural simulations based on the compartmental modeling technique and results of such an implementation, with a strong focus on multi-core architectures and automation, i.e. user-transparent load balancing.

Neural Simulations on Multi-Core Architectures

PubMed Central

Eichner, Hubert; Klug, Tobias; Borst, Alexander

2009-01-01

Neuroscience is witnessing increasing knowledge about the anatomy and electrophysiological properties of neurons and their connectivity, leading to an ever increasing computational complexity of neural simulations. At the same time, a rather radical change in personal computer technology emerges with the establishment of multi-cores: high-density, explicitly parallel processor architectures for both high performance as well as standard desktop computers. This work introduces strategies for the parallelization of biophysically realistic neural simulations based on the compartmental modeling technique and results of such an implementation, with a strong focus on multi-core architectures and automation, i.e. user-transparent load balancing. PMID:19636393

Building the Core Architecture of a Multiagent System Product Line: With an example from a future NASA Mission

NASA Technical Reports Server (NTRS)

Pena, Joaquin; Hinchey, Michael G.; Ruiz-Cortes, Antonio

2006-01-01

The field of Software Product Lines (SPL) emphasizes building a core architecture for a family of software products from which concrete products can be derived rapidly. This helps to reduce time-to-market, costs, etc., and can result in improved software quality and safety. Current AOSE methodologies are concerned with developing a single Multiagent System. We propose an initial approach to developing the core architecture of a Multiagent Systems Product Line (MAS-PL), exemplifying our approach with reference to a concept NASA mission based on multiagent technology.

Efficacy of the Technological/Engineering Design Approach: Imposed Cognitive Demands within Design-Based Biotechnology Instruction

ERIC Educational Resources Information Center

Wells, John G.

2016-01-01

Though not empirically established as an efficacious pedagogy for promoting higher order thinking skills, technological/engineering design-based learning in K-12 STEM education is increasingly embraced as a core instructional method for integrative STEM learning that promotes the development of student critical thinking skills (Honey, Pearson,…

Can Technology Improve Large Class Learning? The Case of an Upper-Division Business Core Class

ERIC Educational Resources Information Center

Stanley, Denise

2013-01-01

Larger classes are often associated with lower student achievement. The author tested the hypothesis that the introduction of personal response systems significantly improves scores in a 250-seat classroom, through the channels of improved attendance and engagement. She focused on how continuous participation with the technology could change…

Tech Prep Information Technology Skill Standards-Based Curriculum. Building a Foundation for Tomorrow.

ERIC Educational Resources Information Center

Bellevue Community Coll., WA. Northeast Tech Prep Consortium.

This guidebook provides the elements of curriculum that will help educators prepare students for careers in the field of information technology (IT). The introduction addresses national context, skill standards development, and educational response to the skills gap. The high school core IT curriculum is then presented, including: (1) project…

Clean Cities Now, Vol. 20, No. 2, Winter 2017 - Capitalizing on Core Strengths & New Technologies for Today's Mobility Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

2017-01-01

Clean Cities Now is the official semi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

AIM for Digital Equity

ERIC Educational Resources Information Center

Bowser, Gayl; Zabala, Joy Smiley

2012-01-01

In a 2011 segment on CNN "Headline News," Doug Levin, CEO of the State Educational Technology Director's Association, asserted that the shift to Common Core State Standards, the prevalence of open content, and the rapid increase in the availability of mobile technology will soon make paper textbooks a thing of the past in U.S. schools. He predicts…

Hydroponics: Content and Rationale

ERIC Educational Resources Information Center

Ernst, Jeremy V.; Busby, Joe R.

2009-01-01

Technology education has the means of becoming the catalyst for integrated content and curricula, especially in core academic areas, such as science and mathematics, where it has been found difficult to incorporate other subject matter. Technology is diverse enough in nature that it can be addressed by a variety of content areas, serving as a true…

Information Technology and Tomorrow's University: A President's Confessions and Advice

ERIC Educational Resources Information Center

Koester, Jolene

2011-01-01

Higher education is in a transformational period, and this author believes that information technology will play a central role in this transformation, offering unimaginable opportunities and demanding unforeseen responses. She also believes that IT professionals can and should be at the core of envisioning and shaping the future of colleges and…

Testing the Test: A Study of PARCC Field Trials in Two School Districts. Policy Brief

ERIC Educational Resources Information Center

Rennie Center for Education Research & Policy, 2015

2015-01-01

The potential use of computer-based assessments has raised concerns from educators, policymakers, and parents about information technology infrastructure in school districts and the preparation of staff and students to use new technologies for assessment purposes, and the potential impact of testing activities on core school functions,…

Online Professional Development: Combining Best Practices from Teacher, Technology and Distance Education

ERIC Educational Resources Information Center

Signer, Barbara

2008-01-01

This article provides a model of online professional development that is consistent with recommendations from the fields of teacher education, technology staff development and online learning. A graduate mathematics education course designed and implemented using the model is presented to exemplify the model's core components and interactions. The…

Tools for Teaching Change Management: The Matrix of Change and Supporting Software.

ERIC Educational Resources Information Center

Brynjolfsson, Erik; van Alstyne, Marshall; Bernstein, Abraham; Renshaw, Amy Austin

This paper presents recent developments in provision of support tools for change management and explains how they have been effectively used for teaching students about information technology (IT)-enabled change management in the core IT classes at MIT (Massachusetts Institute of Technology) and Stanford University (California). It also describes…

Big Ideas at the Center for Innovation in Education at Thomas College

ERIC Educational Resources Information Center

Prawat, Ted

2016-01-01

Schools and teachers are looking for innovative ways to teach the "big ideas" emerging in the core curricula, especially in STEAM fields (science technology, engineering, arts and math). As a result, learning environments that support digital learning and educational technology on various platforms and devices are taking on…

Technology Transfer and Innovation Initiatives in Strategic Management: Generating an Alternative Perspective

ERIC Educational Resources Information Center

Major, E.

2003-01-01

This paper taps the strategic management discipline to inform our understanding of technology transfer and innovation (TTI) initiatives. With special focus on the UK Foresight programme it considers the impacts that the resource-based and core competence approaches to strategy can have on understanding the nature and effectiveness of TTI…

"A Librarian, a Technologist and an Information Scientist Are Out in a Boat..."

ERIC Educational Resources Information Center

Latham, Joyce M.

2002-01-01

Examines changes in libraries due to information technology and discusses the need for partnerships between librarians, information scientists, and technologists. Topics include access to information as the core concept for communication; research into how library systems are actually used; testing libraries' use of technology; and how library…

Essays on Information Technology and Value Creation: Corporate Governance, Software Firm Acquisitions, and Entrepreneurial Signaling

ERIC Educational Resources Information Center

Bandodkar, Nikhil Ramkrishna

2017-01-01

Value creation is often at the core of many organizational activities and is often reflected in the exploration and exploitation of opportunities to foster organizational growth. In modern organizations, information technology (IT) plays a significant role in creating business value and building substantial competitive advantage. While in the…

Citations of "ETR&D" and Related Journals, 1990-2004

ERIC Educational Resources Information Center

Gall, James E.; Ku, Heng-Yu; Gurney, Keyleigh; Tseng, Hung-Wei; Yeh, Hsin-Te; Chen, Qin

2010-01-01

Scientific communication in the field of educational technology was examined by analyzing references from and citations to articles published in "Educational Technology Research and Development" ("ETR&D") for the period 1990-2004 with particular emphasis on other journals found in the citation record. Data were collected on the 369 core articles…

Solar Energy: Non-Residential Applications and Future Technology: Student Material. First Edition.

ERIC Educational Resources Information Center

Takacs, Robert; Orsak, Charles G., Jr.

Student materials are presented for the course, Non-Residential Applications and Future Technology, one of seven core courses in Navarro College's two-year associate degree program for solar technicians. First, introductory material discusses the form and objectives of the course and ways of using the student materials. Next, readings, worksheets,…

Information Technology Management: Course Re-Design Using an Assessment Driven Approach

ERIC Educational Resources Information Center

Schwieger, Dana; Surendran, Ken

2013-01-01

One of the core courses in the IS2010 Model Curriculum Guideline is "IS Strategy, Management and Acquisition" ("ISMA"). The authors redesigned their pre-IS2010 model Information Technology Management (ITM) course to meet the skills development stated in the ISMA course. Since the IT discipline is changing rapidly, the technical…

Identifying Employer Needs from Accounting Information Systems Programs

ERIC Educational Resources Information Center

Dillon, Thomas W.; Kruck, S. E.

2008-01-01

As the need for new hires with accounting and information technology knowledge increases, a new major in accounting information systems (AIS) has emerged. This new AIS degree is a hybrid of accounting concepts and common business subjects combined with key information technology issues. Employers were presented with 56 core content areas found in…

Implications of RFID in Location-Aware Wi-Fi Networks

ERIC Educational Resources Information Center

Duhainy, Robert

2010-01-01

The use of radio frequency identification (RFID) technology is increasingly common. Its use for specific applications has been mandated by a number of major retailers, as well as by the U.S. government; however, core RFID technologies and networks lack consistent approaches to maximize the efficiency and security of RFID applications. The purpose…

Swipe In, Tap Out: Advancing Student Entrepreneurship in the CIS Sandbox

ERIC Educational Resources Information Center

Charlebois, Conner; Hentschel, Nicholas; Frydenberg, Mark

2014-01-01

The Computer Information Systems Learning and Technology Sandbox (CIS Sandbox) opened as a collaborative learning lab during the fall 2011 semester at a New England business university. The facility employs 24 student workers, who, in addition to providing core tutoring services, are encouraged to explore new technologies and take on special…

Communication and Information Systems Infrastructure Skills.

ERIC Educational Resources Information Center

Maughan, George R.

2001-01-01

Asserts that users and managers of information technology (IT) in higher education institutions need evolving skills as well as an awareness of how changing technology makes them dependent on each other in new ways. Describes the roles and skills of the core IT workforce, department managers, and universal users, and addresses training needs. (EV)

Process engineering of polynanomeric layered and infused composites

NASA Astrophysics Data System (ADS)

Williams, Ebonee Porche Marie

As the application of advanced polymeric composites expands, the continued adaptation of traditional as well as the incorporation and/or implementation of new technologies continue to be at the core of development for engineers. One of these traditional technologies is honeycomb sandwich composites. This technology has been around for more than fifty years and there have been minimal alterations to the materials used to produce the parts and the process used to manufacture the structures. This is where the depth of this work focused. Traditional honeycomb core dip resin systems were modified to incorporate nano scale fillers. This adaptation is one of the defining aspects of polynanomeric systems, the concept of which is that modifications of the nano scale in a polymer system create nano layered structures that emulate the properties of both the polymer and the nano filler, a nano composite. The modified resin systems were characterized to investigate morphology, thermal and mechanical properties as well as electrical characteristics. It was observed that the nano altered resin system exhibited increased mechanical, 50 to 60%, and thermal properties, burn temperatures extended by 30°C, while also demonstrating improved electrical properties. These were significant results given that the main applications of honeycomb sandwich structures are on the interior of aircrafts. These results could open the door to some new applications of the modified resin system. This work also implemented a new processing technique to produce honeycomb sandwich structures. The technique was Vacuum Assisted Resin Transfer Molding, VARTM, which has gained interest over the last decade due to the reduced up front cost to initiate production, the ease of processing, and the overall health benefits. This process was successfully performed to produce sandwich structures by incorporating a permeable scrim layer at the core face sheet interface. This was the first successful production of unfilled honeycomb core sandwich part production. Overall this work is at the tip of implementing new materials and processing techniques into honeycomb core and honeycomb sandwich composite structures.

Tribological characterization of the drill pipe tool joints reconditioned by using welding technologies

NASA Astrophysics Data System (ADS)

Caltaru, M.; Badicioiu, M.; Ripeanu, R. G.; Dinita, A.; Minescu, M.; Laudacescu, E.

2018-01-01

Drill pipe is a seamless steel pipe with upset ends fitted with special threaded ends that are known as tool joints. During drilling operations, the wall thickness of the drill pipe and the outside diameter of the tool joints will be gradually reduced due to wear. The present research work investigate the possibility of reconditioning the drill pipe tool joints by hardbanding with a new metal-cored coppered flux cored wire, Cr-Mo alloyed, using the gas metal active welding process, taking into considerations two different hardbanding technologies, consisting in: hardbanding drill pipe tool joints after removing the old hardbanding material and surface reconstruction with a compensation material (case A), and hardbanding tool joint drill pipe, without removing the old hardbanding material (case B). The present paper brings forward the experimental researches regarding the tribological characterization of the reconditioned drill pipe tool joint by performing macroscopic analyses, metallographic analyses, Vickers hardness measurement, chemical composition measurement and wear tests conducted on ball on disk friction couples, in order to certify the quality of the hardbanding obtained by different technological approaches, to validate the optimum technology.

The internet of things and the development of network technology in China

NASA Astrophysics Data System (ADS)

Wang, Ruxin; Zhao, Jianzhen; Ma, Hangtong

2018-04-01

The English name of the Internet of Things the Internet of Things, referred to as: the IOT. Internet of Things through the pass, radio frequency identification technology, global positioning system technology, real-time acquisition of any monitoring, connectivity, interactive objects or processes, collecting their sound, light, heat, electricity, mechanics, chemistry, biology, the location of a variety of the information you need network access through a variety of possible things and things, objects and people in the Pan-link intelligent perception of items and processes, identification and management. The Internet of Things IntelliSense recognition technology and pervasive computing, ubiquitous network integration application, known as the third wave of the world's information industry development following the computer, the Internet. Not so much the Internet of Things is a network, as Internet of Things services and applications, Internet of Things is also seen as Internet application development. Therefore, the application of innovation is the core of the development of Internet of Things, and 2.0 of the user experience as the core innovation is the soul of Things.

Research of Tool Durability in Surface Plastic Deformation Processing by Burnishing of Steel Without Metalworking Fluids

NASA Astrophysics Data System (ADS)

Grigoriev, S. N.; Bobrovskij, N. M.; Melnikov, P. A.; Bobrovskij, I. N.

2017-05-01

Modern vector of development of machining technologies aimed at the transition to environmentally safe technologies - “green” technologies. The concept of “green technology” includes a set of signs of knowledge intended for practical use (“technology”). One of the ways to improve the quality of production is the use of surface plastic deformation (SPD) processing methods. The advantage of the SPD is a capability to combine effects of finishing and strengthening treatment. The SPD processing can replace operations: fine turning, grinding or polishing. The SPD is a forceful contact impact of indentor on workpiece’s surface in condition of their relative motion. It is difficult to implement the core technology of the SPD (burnishing, roller burnishing, etc.) while maintaining core technological advantages without the use of lubricating and cooling technology (metalworking fluids, MWF). The “green” SPD technology was developed by the authors for dry processing and has not such shortcomings. When processing with SPD without use of MWF requirements for tool’s durability is most significant, especially in the conditions of mass production. It is important to determine the period of durability of tool at the design stage of the technological process with the purpose of wastage preventing. This paper represents the results of durability research of natural and synthetic diamonds (polycrystalline diamond - ASPK) as well as precision of polycrystalline superabrasive tools made of dense boron nitride (DBN) during SPD processing without application of MWF.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, Reinhold C.

This is the first formal progress report issued by the ORNL Life Sciences Division. It covers the period from February 1997 through December 1998, which has been critical in the formation of our new division. The legacy of 50 years of excellence in biological research at ORNL has been an important driver for everyone in the division to do their part so that this new research division can realize the potential it has to make seminal contributions to the life sciences for years to come. This reporting period is characterized by intense assessment and planning efforts. They included thorough scrutinymore » of our strengths and weaknesses, analyses of our situation with respect to comparative research organizations, and identification of major thrust areas leading to core research efforts that take advantage of our special facilities and expertise. Our goal is to develop significant research and development (R&D) programs in selected important areas to which we can make significant contributions by combining our distinctive expertise and resources in the biological sciences with those in the physical, engineering, and computational sciences. Significant facilities in mouse genomics, mass spectrometry, neutron science, bioanalytical technologies, and high performance computing are critical to the success of our programs. Research and development efforts in the division are organized in six sections. These cluster into two broad areas of R&D: systems biology and technology applications. The systems biology part of the division encompasses our core biological research programs. It includes the Mammalian Genetics and Development Section, the Biochemistry and Biophysics Section, and the Computational Biosciences Section. The technology applications part of the division encompasses the Assessment Technology Section, the Environmental Technology Section, and the Toxicology and Risk Analysis Section. These sections are the stewards of the division's core competencies. The common mission of the division is to advance science and technology to understand complex biological systems and their relationship with human health and the environment.« less

Effects of a New Cooling Technology on Physical Performance in US Air Force Military Personnel.

PubMed

O'Hara, Reginald; Vojta, Christopher; Henry, Amy; Caldwell, Lydia; Wade, Molly; Swanton, Stacie; Linderman, Jon K; Ordway, Jason

2016-01-01

Heat-related illness is a critical factor for military personnel operating in hyperthermic environments. Heat illness can alter cognitive and physical performance during sustained operations missions. Therefore, the primary purpose of this investigation was to determine the effects of a novel cooling shirt on core body temperature in highly trained US Air Force personnel. Twelve trained (at least 80th percentile for aerobic fitness according to the American College of Sports Medicine, at least 90% on the US Air Force fitness test), male Air Force participants (mean values: age, 25 ± 2.8 years; height, 178 ± 7.9cm; body weight 78 ± 9.6kg; maximal oxygen uptake, 57 ± 1.9mL/kg/ min; and body fat, 10% ± 0.03%) completed this study. Subjects performed a 70-minute weighted treadmill walking test and 10-minute, 22.7kg sandbag shuttle test under two conditions: (1) "loaded" (shirt with cooling inserts) and (2) "unloaded" (shirt with no cooling inserts). Core body temperature, exercise heart rate, capillary blood lactate, and ratings of perceived exertion were recorded. Core body temperature was lower (ρ = .001) during the 70-minute treadmill walking test in the loaded condition. Peak core temperature during the 70-minute walking test was also significantly lower (ρ = .038) in the loaded condition. This lightweight (471g), passive cooling technology offers multiple hours of sustained cooling and reduced core and peak body temperature during a 70-minute, 22.7kg weighted-vest walking test. 2016.

Vortex-Core Reversal Dynamics: Towards Vortex Random Access Memory

NASA Astrophysics Data System (ADS)

Kim, Sang-Koog

2011-03-01

An energy-efficient, ultrahigh-density, ultrafast, and nonvolatile solid-state universal memory is a long-held dream in the field of information-storage technology. The magnetic random access memory (MRAM) along with a spin-transfer-torque switching mechanism is a strong candidate-means of realizing that dream, given its nonvolatility, infinite endurance, and fast random access. Magnetic vortices in patterned soft magnetic dots promise ground-breaking applications in information-storage devices, owing to the very stable twofold ground states of either their upward or downward core magnetization orientation and plausible core switching by in-plane alternating magnetic fields or spin-polarized currents. However, two technologically most important but very challenging issues --- low-power recording and reliable selection of each memory cell with already existing cross-point architectures --- have not yet been resolved for the basic operations in information storage, that is, writing (recording) and readout. Here, we experimentally demonstrate a magnetic vortex random access memory (VRAM) in the basic cross-point architecture. This unique VRAM offers reliable cell selection and low-power-consumption control of switching of out-of-plane core magnetizations using specially designed rotating magnetic fields generated by two orthogonal and unipolar Gaussian-pulse currents along with optimized pulse width and time delay. Our achievement of a new device based on a new material, that is, a medium composed of patterned vortex-state disks, together with the new physics on ultrafast vortex-core switching dynamics, can stimulate further fruitful research on MRAMs that are based on vortex-state dot arrays.

Low Cost Hypermixing Ejector Ramjet Program.

DTIC Science & Technology

1975-06-01

SEC.A- SCALE: ZO/I q.zPL vEw A -3 SCALE..?0/1 - w aC LIT OFM TIEA -LLIS S A?-. 87 SECTION XI MODIFIED HYPERMIXING EJECTOR EXPERIMENTAL PROGRAM 1...CAN). psi.. ramage’. Witt shbiuma, .as slacawim iam Fit.,7 Ti’LDtlase lreaa ftime ,mmeasss9ri’d vaiaac’s are aimemit UK ) ft Sv ieAwe(’r 01311 this...Neav OrdueNKw TeOt Station, Dover, New Jersey , March 31, 1955 (Coniderial). 3. Data on UnsyawwetricaI.DinletAyhydrazin* (DMW), Revisin No. 3. Aerojet

Profound Interfacial Effects in CoFe2O4/Fe3O4 and Fe3O4/CoFe2O4 Core/Shell Nanoparticles

NASA Astrophysics Data System (ADS)

Polishchuk, Dmytro; Nedelko, Natalia; Solopan, Sergii; Ślawska-Waniewska, Anna; Zamorskyi, Vladyslav; Tovstolytkin, Alexandr; Belous, Anatolii

2018-03-01

Two sets of core/shell magnetic nanoparticles, CoFe2O4/Fe3O4 and Fe3O4/CoFe2O4, with a fixed diameter of the core ( 4.1 and 6.3 nm for the former and latter sets, respectively) and thickness of shells up to 2.5 nm were synthesized from metal chlorides in a diethylene glycol solution. The nanoparticles were characterized by X-ray diffraction, transmission electron microscopy, and magnetic measurements. The analysis of the results of magnetic measurements shows that coating of magnetic nanoparticles with the shells results in two simultaneous effects: first, it modifies the parameters of the core-shell interface, and second, it makes the particles acquire combined features of the core and the shell. The first effect becomes especially prominent when the parameters of core and shell strongly differ from each other. The results obtained are useful for optimizing and tailoring the parameters of core/shell spinel ferrite magnetic nanoparticles for their use in various technological and biomedical applications.

A database of paleoceanographic sediment cores from the North Pacific, 1951-2016

NASA Astrophysics Data System (ADS)

Borreggine, Marisa; Myhre, Sarah E.; Mislan, K. Allison S.; Deutsch, Curtis; Davis, Catherine V.

2017-09-01

We assessed sediment coring, data acquisition, and publications from the North Pacific (north of 30° N) from 1951 to 2016. There are 2134 sediment cores collected by American, French, Japanese, Russian, and international research vessels across the North Pacific (including the Pacific subarctic gyre, Alaskan gyre, Japan margin, and California margin; 1391 cores), the Sea of Okhotsk (271 cores), the Bering Sea (123 cores), and the Sea of Japan (349 cores) reported here. All existing metadata associated with these sediment cores are documented here, including coring date, location, core number, cruise number, water depth, vessel metadata, and coring technology. North Pacific sediment core age models are built with isotope stratigraphy, radiocarbon dating, magnetostratigraphy, biostratigraphy, tephrochronology, % opal, color, and lithological proxies. Here, we evaluate the iterative generation of each published age model and provide comprehensive documentation of the dating techniques used, along with sedimentation rates and age ranges. We categorized cores according to the availability of a variety of proxy evidence, including biological (e.g., benthic and planktonic foraminifera assemblages), geochemical (e.g., major trace element concentrations), isotopic (e.g., bulk sediment nitrogen, oxygen, and carbon isotopes), and stratigraphic (e.g., preserved laminations) proxies. This database is a unique resource to the paleoceanographic and paleoclimate communities and provides cohesive accessibility to sedimentary sequences, age model development, and proxies. The data set is publicly available through PANGAEA at https://doi.org/10.1594/PANGAEA.875998.

Family and Consumer Sciences Technology-Life-Careers Core Curriculum. A Curriculum Guide. A Family and Consumer Sciences Education Course of Study for Grades 6-7.

ERIC Educational Resources Information Center

Utah State Office of Education, Salt Lake City.

This curriculum, part of a coordinated exploratory vocational core program, is an activity-oriented instructional course that enables students in grades 6-7 to explore careers and skills related to consumer and occupational roles. The curriculum consists of five units: (1) independent living skills; (2) families; (3) child care; (4) textiles…

Using Powder Cored Tubular Wire Technology to Enhance Electron Beam Freeform Fabricated Structures

NASA Technical Reports Server (NTRS)

Gonzales, Devon; Liu, Stephen; Domack, Marcia; Hafley, Robert

2016-01-01

Electron Beam Freeform Fabrication (EBF3) is an additive manufacturing technique, developed at NASA Langley Research Center, capable of fabricating large scale aerospace parts. Advantages of using EBF3 as opposed to conventional manufacturing methods include, decreased design-to-product time, decreased wasted material, and the ability to adapt controls to produce geometrically complex parts with properties comparable to wrought products. However, to fully exploit the potential of the EBF3 process development of materials tailored for the process is required. Powder cored tubular wire (PCTW) technology was used to modify Ti-6Al-4V and Al 6061 feedstock to enhance alloy content, refine grain size, and create a metal matrix composite in the as-solidified structures, respectively.

The Information Technology Infrastructure for the Translational Genomics Core and the Partners Biobank at Partners Personalized Medicine

PubMed Central

Boutin, Natalie; Holzbach, Ana; Mahanta, Lisa; Aldama, Jackie; Cerretani, Xander; Embree, Kevin; Leon, Irene; Rathi, Neeta; Vickers, Matilde

2016-01-01

The Biobank and Translational Genomics core at Partners Personalized Medicine requires robust software and hardware. This Information Technology (IT) infrastructure enables the storage and transfer of large amounts of data, drives efficiencies in the laboratory, maintains data integrity from the time of consent to the time that genomic data is distributed for research, and enables the management of complex genetic data. Here, we describe the functional components of the research IT infrastructure at Partners Personalized Medicine and how they integrate with existing clinical and research systems, review some of the ways in which this IT infrastructure maintains data integrity and security, and discuss some of the challenges inherent to building and maintaining such infrastructure. PMID:26805892

Free-space optics technology employed in an UMTS release 4 bearer independent core network access part

NASA Astrophysics Data System (ADS)

Bibac, Ionut

2005-08-01

The UMTS Bearer Independent Core Network program introduced the 3rd Generation Partnership Program Release 4 BICN architecture into the legacy UMTS TDM-switched network. BICN is the application of calI server archltecture for voice and circuit switched data, enabling the provisioning of traditional circuit-switched services using a packet-switched transport network. Today"s business climate has made it essential for service providers to develop a comprehensive networking strategy that means introduction of RCBICN networks. The R4-BICN solution to the evolution of the Core Network in UMTS will enable operators to significantly reduce the capital and operational costs of delivering both traditional voice sewices and new multimedia services. To build the optical backbone, which can support the third generation (3G) packetized infrastructure, the operators could choose a fibre connection, or they could retain the benefits of a wireless connectivity by using a FSO - Free Space Optical lmk, the only wireless technology available that is capable of achieving data rates up to 2.4 Gbit/s. FSO offers viable alternatives for both core transmission networks and for replacing microwaves links in NodeB - RNC access networks. The paper and presentation aim to demonstrate the manner in which FSO products and networks are employed into R4-BICN design solutions.

The impact of capacity growth in national telecommunications networks.

PubMed

Lord, Andrew; Soppera, Andrea; Jacquet, Arnaud

2016-03-06

This paper discusses both UK-based and global Internet data bandwidth growth, beginning with historical data for the BT network. We examine the time variations in consumer behaviour and how this is statistically aggregated into larger traffic loads on national core fibre communications networks. The random nature of consumer Internet behaviour, where very few consumers require maximum bandwidth simultaneously, provides the opportunity for a significant statistical gain. The paper looks at predictions for how this growth might continue over the next 10-20 years, giving estimates for the amount of bandwidth that networks should support in the future. The paper then explains how national networks are designed to accommodate these traffic levels, and the various network roles, including access, metro and core, are described. The physical layer network is put into the context of how the packet and service layers are designed and the applications and location of content are also included in an overall network overview. The specific role of content servers in alleviating core network traffic loads is highlighted. The status of the relevant transmission technologies in the access, metro and core is given, showing that these technologies, with adequate research, should be sufficient to provide bandwidth for consumers in the next 10-20 years. © 2016 The Author(s).

Virtual optical network mapping and core allocation in elastic optical networks using multi-core fibers

NASA Astrophysics Data System (ADS)

Xuan, Hejun; Wang, Yuping; Xu, Zhanqi; Hao, Shanshan; Wang, Xiaoli

2017-11-01

Virtualization technology can greatly improve the efficiency of the networks by allowing the virtual optical networks to share the resources of the physical networks. However, it will face some challenges, such as finding the efficient strategies for virtual nodes mapping, virtual links mapping and spectrum assignment. It is even more complex and challenging when the physical elastic optical networks using multi-core fibers. To tackle these challenges, we establish a constrained optimization model to determine the optimal schemes of optical network mapping, core allocation and spectrum assignment. To solve the model efficiently, tailor-made encoding scheme, crossover and mutation operators are designed. Based on these, an efficient genetic algorithm is proposed to obtain the optimal schemes of the virtual nodes mapping, virtual links mapping, core allocation. The simulation experiments are conducted on three widely used networks, and the experimental results show the effectiveness of the proposed model and algorithm.

Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters.

PubMed

Lin, Wei-Shao; Starr, Thomas L; Harris, Bryan T; Zandinejad, Amirali; Morton, Dean

2013-01-01

This article describes the preliminary findings of the mechanical properties of functionally graded titanium with controlled distribution of porosity and a reduced Young's modulus on the basis of a computeraided design (CAD) file, using the rapid-prototyping, direct metal laser sintering (DMLS) technique. Sixty specimens of Ti-6Al-4V were created using a DMLS machine (M270) following the standard for tensile testing of metals. One group was fabricated with only 170 W of laser energy to create fully dense specimens (control group). The remaining specimens all featured an outer fully dense "skin" layer and a partially sintered porous inner "core" region. The outer "skin" of each specimen was scanned at 170 W and set at a thickness of 0.35, 1.00, or 1.50 mm for different specimen groups. The inner "core" of each specimen was scanned at a lower laser power (43 or 85 W). The partially sintered core was clearly visible in all specimens, with somewhat greater porosity with the lower laser power. However, the amount of porosity in the core region was not related to the laser power alone; thinner skin layers resulted in higher porosity for the same power values in the core structure. The lowest Young's modulus achieved, 35 GPa, is close to that of bone and was achieved with a laser power of 43 W and a skin thickness of 0.35 mm, producing a core that comprised 74% of the total volume. Additive manufacturing technology may provide an efficient alternative way to fabricate customized dental implants based on a CAD file with a functionally graded structure that may minimize stress shielding and improve the long-term performance of dental implants.

Patient-specific core decompression surgery for early-stage ischemic necrosis of the femoral head

PubMed Central

Wang, Wei; Hu, Wei; Yang, Pei; Dang, Xiao Qian; Li, Xiao Hui; Wang, Kun Zheng

2017-01-01

Introduction Core decompression is an efficient treatment for early stage ischemic necrosis of the femoral head. In conventional procedures, the pre-operative X-ray only shows one plane of the ischemic area, which often results in inaccurate drilling. This paper introduces a new method that uses computer-assisted technology and rapid prototyping to enhance drilling accuracy during core decompression surgeries and presents a validation study of cadaveric tests. Methods Twelve cadaveric human femurs were used to simulate early-stage ischemic necrosis. The core decompression target at the anterolateral femoral head was simulated using an embedded glass ball (target). Three positioning Kirschner wires were drilled into the top and bottom of the large rotor. The specimen was then subjected to computed tomography (CT). A CT image of the specimen was imported into the Mimics software to construct a three-dimensional model including the target. The best core decompression channel was then designed using the 3D model. A navigational template for the specimen was designed using the Pro/E software and manufactured by rapid prototyping technology to guide the drilling channel. The specimen-specific navigation template was installed on the specimen using positioning Kirschner wires. Drilling was performed using a guide needle through the guiding hole on the templates. The distance between the end point of the guide needle and the target was measured to validate the patient-specific surgical accuracy. Results The average distance between the tip of the guide needle drilled through the guiding template and the target was 1.92±0.071 mm. Conclusions Core decompression using a computer-rapid prototyping template is a reliable and accurate technique that could provide a new method of precision decompression for early-stage ischemic necrosis. PMID:28464029

Patient-specific core decompression surgery for early-stage ischemic necrosis of the femoral head.

PubMed

Wang, Wei; Hu, Wei; Yang, Pei; Dang, Xiao Qian; Li, Xiao Hui; Wang, Kun Zheng

2017-01-01

Core decompression is an efficient treatment for early stage ischemic necrosis of the femoral head. In conventional procedures, the pre-operative X-ray only shows one plane of the ischemic area, which often results in inaccurate drilling. This paper introduces a new method that uses computer-assisted technology and rapid prototyping to enhance drilling accuracy during core decompression surgeries and presents a validation study of cadaveric tests. Twelve cadaveric human femurs were used to simulate early-stage ischemic necrosis. The core decompression target at the anterolateral femoral head was simulated using an embedded glass ball (target). Three positioning Kirschner wires were drilled into the top and bottom of the large rotor. The specimen was then subjected to computed tomography (CT). A CT image of the specimen was imported into the Mimics software to construct a three-dimensional model including the target. The best core decompression channel was then designed using the 3D model. A navigational template for the specimen was designed using the Pro/E software and manufactured by rapid prototyping technology to guide the drilling channel. The specimen-specific navigation template was installed on the specimen using positioning Kirschner wires. Drilling was performed using a guide needle through the guiding hole on the templates. The distance between the end point of the guide needle and the target was measured to validate the patient-specific surgical accuracy. The average distance between the tip of the guide needle drilled through the guiding template and the target was 1.92±0.071 mm. Core decompression using a computer-rapid prototyping template is a reliable and accurate technique that could provide a new method of precision decompression for early-stage ischemic necrosis.

[The true story and advantages of the famous Hepatitis B virus core particles: Outlook 2016].

PubMed

Pumpens, P; Grens, E

2016-01-01

This review article is a continuation of the paper "Hepatitis B core particles as a universal display model: a structure-function basis for development" written by Pumpens P. and Grens E., ordered by Professor Lev Kisselev and published in FEBS Letters, 1999, 442, 1-6. The past 17 years have strengthened the paper's finding that the human hepatitis B virus core protein, along with other Hepadnaviridae family member core proteins, is a mysterious, multifunctional protein. The core gene of the Hepadnaviridae genome encodes five partially collinear proteins. The most important of these is the HBV core protein p21, or HBc. It can self-assemble by forming viral HBc particles, but also plays a crucial role in the regulation of viral replication. Since 1986, the HBc protein has been one of the first and the most successful tools of the virus-like particle (VLP) technology. Later, the woodchuck hepatitis virus core protein (WHc) was also used as a VLP carrier. The Hepadnaviridae core proteins remain favourite VLP candidates for the knowledge-based design of future vaccines, gene therapy vectors, specifically targeted nanocontainers, and other modern nanotechnological tools for prospective medical use.

High-Temperature Smart Structures for Engine Noise Reduction and Performance Enhancement

NASA Technical Reports Server (NTRS)

Quackenbush, Todd R.; McKillip, Robert M., Jr.

2011-01-01

One of key NASA goals is to develop and integrate noise reduction technology to enable unrestricted air transportation service to all communities. One of the technical priorities of this activity has been to account for and reduce noise via propulsion/airframe interactions, identifying advanced concepts to be integrated with the airframe to mitigate these noise-producing mechanisms. An adaptive geometry chevron using embedded smart structures technology offers the possibility of maximizing engine performance while retaining and possibly enhancing the favorable noise characteristics of current designs. New high-temperature shape memory alloy (HTSMA) materials technology enables the devices to operate in both low-temperature (fan) and high-temperature (core) exhaust flows. Chevron-equipped engines have demonstrated reduced noise in testing and operational use. It is desirable to have the noise benefits of chevrons in takeoff/landing conditions, but have them deployed into a minimum drag position for cruise flight. The central feature of the innovation was building on rapidly maturing HTSMA technology to implement a next-generation aircraft noise mitigation system centered on adaptive chevron flow control surfaces. In general, SMA-actuated devices have the potential to enhance the demonstrated noise reduction effectiveness of chevron systems while eliminating the associated performance penalty. The use of structurally integrated smart devices will minimize the mechanical and subsystem complexity of this implementation. The central innovations of the effort entail the modification of prior chevron designs to include a small cut that relaxes structural stiffness without compromising the desired flow characteristics over the surface; the reorientation of SMA actuation devices to apply forces to deflect the chevron tip, exploiting this relaxed stiffness; and the use of high-temperature SMA (HTSMA) materials to enable operation in the demanding core chevron environment. The overall conclusion of these design studies was that the cut chevron concept is a critical enabling step in bringing the variable geometry core chevron within reach. The presence of the cut may be aerodynamically undesirable in some respects, but it is present only when the chevron is not immersed in the core jet exhaust. When deployed, the gap closes as the chevron tip enters the high-speed, high-temperature core stream. Aeroacoustic testing and flow visualization support the contention that this cut is inconsequential to chevron performance.

Why American business demands twenty-first century learning: A company perspective.

PubMed

Knox, Allyson

2006-01-01

Microsoft is an innovative corporation demonstrating the kind and caliber of job skills needed in the twenty-first century. It demonstrates its commitment to twenty-first century skills by holding its employees accountable to a set of core competencies, enabling the company to run effectively. The author explores how Microsoft's core competencies parallel the Partnership for 21st Century Skills learning frameworks. Both require advanced problem-solving skills and a passion for technology, both expect individuals to be able to work in teams, both look for a love of learning, and both call for the self-confidence to honestly self-evaluate. Microsoft also works to cultivate twenty-first century skills among future workers, investing in education to help prepare young people for competitive futures. As the need for digital literacy has become imperative, technology companies have taken the lead in facilitating technology training by partnering with schools and communities. Microsoft is playing a direct role in preparing students for what lies ahead in their careers. To further twenty-first century skills, or core competencies, among the nation's youth, Microsoft has established Partners in Learning, a program that helps education organizations build partnerships that leverage technology to improve teaching and learning. One Partners in Learning grantee is Global Kids, a nonprofit organization that trains students to design online games focused on global social issues resonating with civic and global competencies. As Microsoft believes the challenges of competing in today's economy and teaching today's students are substantial but not insurmountable, such partnerships and investments demonstrate Microsoft's belief in and commitment to twenty-first century skills.

VTT's Fabry-Perot interferometer technologies for hyperspectral imaging and mobile sensing applications

NASA Astrophysics Data System (ADS)

Rissanen, Anna; Guo, Bin; Saari, Heikki; Näsilä, Antti; Mannila, Rami; Akujärvi, Altti; Ojanen, Harri

2017-02-01

VTT's Fabry-Perot interferometers (FPI) technology enables creation of small and cost-efficient microspectrometers and hyperspectral imagers - these robust and light-weight sensors are currently finding their way into a variety of novel applications, including emerging medical products, automotive sensors, space instruments and mobile sensing devices. This presentation gives an overview of our core FPI technologies with current advances in generation of novel sensing applications including recent mobile technology demonstrators of a hyperspectral iPhone and a mobile phone CO2 sensor, which aim to advance mobile spectroscopic sensing.

IMPaCT - Integration of Missions, Programs, and Core Technologies

NASA Technical Reports Server (NTRS)

Balacuit, Carlos P.; Cutts, James A.; Peterson, Craig E.; Beauchamp, Patricia M.; Jones, Susan K.; Hang, Winnie N.; Dastur, Shahin D.

2013-01-01

IMPaCT enables comprehensive information on current NASA missions, prospective future missions, and the technologies that NASA is investing in, or considering investing in, to be accessed from a common Web-based interface. It allows dependencies to be established between missions and technology, and from this, the benefits of investing in individual technologies can be determined. The software also allows various scenarios for future missions to be explored against resource constraints, and the nominal cost and schedule of each mission to be modified in an effort to fit within a prescribed budget.

High Impact Technology Compact Combustion (HITCC) Compact Core Technologies

DTIC Science & Technology

2016-01-01

3 2.1 Studies on the Effects of Centrifugal Force on the Performance of a High-G...characterize the performance of combustion systems. Fundamental flame studies provide insights into fluid mechanic and chemistry effects within...which capture fluid mechanic effects . Parametric studies are used to explore new design space and improve experiments. The third aspect of meeting the

Mississippi Curriculum Framework for Business and Computer Technology (Program CIP: 52.0408--Gen. Office/Clerical & Typing Service). Secondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for secondary-level courses in business and computer technology I-II.…

Development of Pre-Service Teachers' Information and Communication Technology (ICT) in Education Competencies in a Mainland Chinese University

ERIC Educational Resources Information Center

Lim, Cher Ping; Yan, Hanbing; Xiong, Xibei

2015-01-01

This paper examines how the design and implementation of a core teacher education course develops pre-service teachers' information communication technology (ICT) in education competencies in a mainland Chinese university. This course adopted a four-component instructional design system to develop its curriculum, incorporated an inquiry-based…

The Information Technology Workforce Crisis: Planning for the Next Environment. NYSFIRM Government Information Focus.

ERIC Educational Resources Information Center

Maxwell, Terrence A.

Attention has been focused on critical shortages of information technology professionals. These shortages have begun to affect the ability of state and local governments to perform core operations, meet new agency program needs and support the development of new enterprise-wide capacities. The shortages are not expected to disappear any time soon.…

Learner Differences in Perceived Satisfaction of an Online Learning: An Extension to the Technology Acceptance Model in an Arabic Sample

ERIC Educational Resources Information Center

Al-Azawei, Ahmed; Lundqvist, Karsten

2015-01-01

Online learning constitutes the most popular distance-learning method, with flexibility, accessibility, visibility, manageability and availability as its core features. However, current research indicates that its efficacy is not consistent across all learners. This study aimed to modify and extend the factors of the Technology Acceptance Model…

Utilizing Human Patient Simulators (HPS) to Meet Learning Objectives across Concurrent Core Nursing Courses: A Pilot Study

ERIC Educational Resources Information Center

Miller, Charman L.; Leadingham, Camille; Vance, Ronald

2010-01-01

Associate Degree Nursing (ADN) faculty are challenged by the monumental responsibility of preparing students to function as safe, professional nurses in a two year course of study. Advances in computer technology and emphasis on integrating technology and active learning strategies into existing course structures have prompted many nurse educators…

Game-Changer: Operationalizing the Common Core Using WebQuests and "Gamification" in Teacher Education

ERIC Educational Resources Information Center

Levitt, Roberta; Piro, Joseph

2014-01-01

Technology integration and Information and Communication Technology (ICT)-based education have enhanced the teaching and learning process by introducing a range of web-based instructional resources for classroom practitioners to deepen and extend instruction. One of the most durable of these resources has been the WebQuest. Introduced around the…

NASA Hypersonics Overview

NASA Technical Reports Server (NTRS)

Dryer, Jay

2017-01-01

This briefing is an overview of NASA's hypersonic portfolio and core capabilities. The scope of work is fundamental research spanning technology readiness and system complexity levels; critical technologies enabling re-usable hypersonic systems; system-level research, design, analysis, validation; and, engage, invigorate and train the next generation of engineers. This briefing was requested by the Aeronautics Subcommittee of the NASA Advisory Council.

Exploration of new perspectives and limitations in Agrobacterium mediated gene transfer technology. Progress report, [June 1, 1992-- May 31, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marton, L.

1994-12-31

This report describes progress aimed at constructing gene-transfer technology for Nicotiana plumbaginifolia. Most actual effort as described herein has so far been directed at exploring new perspectives and limitations in Agrobacterium mediated gene transfer. Accomplishments are described using a core homologous gene targeting vector.

The Effect and Importance of Technology in the Research Process

ERIC Educational Resources Information Center

Cuff, Ed

2014-01-01

From elementary schooling to doctoral-level education, technology has become an integral part of the learning process in and out of the classroom. With the implementation of the Common Core Learning Standards, the skills required for research are more valuable than ever, for they are required to succeed in a college setting, as well as in the…

The Value Simulation-Based Learning Added to Machining Technology in Singapore

ERIC Educational Resources Information Center

Fang, Linda; Tan, Hock Soon; Thwin, Mya Mya; Tan, Kim Cheng; Koh, Caroline

2011-01-01

This study seeks to understand the value simulation-based learning (SBL) added to the learning of Machining Technology in a 15-week core subject course offered to university students. The research questions were: (1) How did SBL enhance classroom learning? (2) How did SBL help participants in their test? (3) How did SBL prepare participants for…

Mississippi Curriculum Framework for Family and Consumer Sciences and Related Technology (Enrichment) (CIP: 20.0101--Comprehensive Consumer & Homemkg. Ed.). Secondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for family and consumer sciences and related technology (enrichment).…

AFRL/Cornell Information Assurance Institute

DTIC Science & Technology

2007-03-01

revewing this colection ofinformation . Send connents regarding this burden estimate or any other aspect of this collection of information, indcudng...collabora- tions involving Cornell and AFRL researchers, with * AFRL researchers able to participate in Cornell research projects, fa- cilitating technology ...approach to developing a science base and technology for supporting large-scale reliable distributed systems. First, so- lutions to core problems were

An Introduction to the Profound Potential of Connected Algebra Activities: Issues of Representation, Engagement and Pedagogy

ERIC Educational Resources Information Center

Hegedus, Stephen J.; Kaput, James J.

2004-01-01

We present two vignettes of classroom episodes that exemplify new activity structures for introducing core algebra ideas such as linear functions, slope as rate and parametric variation within a new educational technology environment that combines two kinds of classroom technology affordances, one based in dynamic representation and the other…

The Perceived Effect of Hidden Costs on the Operational Management of Information Technology Outsourcing: A Qualitative Study

ERIC Educational Resources Information Center

Swift, Ian

2011-01-01

Information technology (IT) outsourcing is a business trend aimed at reducing costs and enabling companies to concentrate on their core competencies. This qualitative multiple case design research study explored the effects of hidden costs on the operational management of IT outsourcing. The study involved analyzing IT outsourcing agreements as…

Crafting glass vessels: current research on the ancient glass collections in the Freer Gallery of Art, Washington, D.C.

NASA Astrophysics Data System (ADS)

Nagel, Alexander; McCarthy, Blythe; Bowe, Stacy

Our knowledge of glass production in ancient Egypt has been well augmented by the publication of recently excavated materials and glass workshops, but also by more recent materials analysis, and experiments of modern glass-makers attempting to reconstruct the production process of thin-walled coreformed glass vessels. From the mounting of a prefabricated core to the final glass product our understanding of this profession has much improved. The small but well preserved glass collection of the Freer Gallery of Art in Washington, D.C. is a valid tool for examining and studying the technology and production of ancient Egyptian core formed glass vessels. Charles Lang Freer (1854-1919) acquired most of the material from Giovanni Dattari in Cairo in 1909. Previously the glass had received only limited discussion, suggesting that most of these vessels were produced in the 18th Dynasty in the 15th and 14th centuries BCE, while others date from the Hellenistic period and later. In an ongoing project we conducted computed radiography in conjunction with qualitative x-ray fluorescence analysis on a selected group of vessels to understand further aspects of the ancient production process. This paper will provide an overview of our recent research and present our data-gathering process and preliminary results. How can the examinations of core formed glass vessels in the Freer Gallery contribute to our understanding of ancient glass production and technology? By focusing on new ways of looking at old assumptions using the Freer Gallery glass collections, we hope to increase understanding of the challenges of the production process of core-vessel technology as represented by these vessels.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Department of Energy Order DOE 5000.4A establishes DOE`s policy and guidelines regarding Laboratory Directed Research and Development (LDRD) at its multiprogram laboratories. As described in 5000.4A, LDRD is ``research and development of a creative and innovative nature which is selected by the Laboratory Director or his or her designee, for the purpose of maintaining the scientific and technological vitality of the Laboratory and to respond to scientific and technological opportunities in conformance with the guidelines in this Order. LDRD includes activities previously defined as ER&D, as well as other discretionary research and development activities not provided for in amore » DOE program.`` Consistent with the Mission Statement and Strategic Plan provided in PNL`s Institutional Plan, the LDRD investments are focused on developing new and innovative approaches in research related to our ``core competencies.`` Currently, PNL`s core competencies have been identified as integrated environmental research; process technology; energy systems research. In this report, the individual summaries of Laboratory-level LDRD projects are organized according to these core competencies. The largest proportion of Laboratory-level LDRD funds is allocated to the core competency of integrated environmental research. A significant proportion of PNL`s LDRD funds are also allocated to projects within the various research centers that are proposed by individual researchers or small research teams. The projects are described in Section 2.0. The projects described in this report represent PNL`s investment in its future and are vital to maintaining the ability to develop creative solutions for the scientific and technical challenges faced by DOE and the nation. In accordance with DOE guidelines, the report provides an overview of PNL`s LDRD program and the management process used for the program and project summaries for each LDRD project.« less

Integration of Biosafety into Core Facility Management

PubMed Central

Fontes, Benjamin

2013-01-01

This presentation will discuss the implementation of biosafety policies for small, medium and large core laboratories with primary shared objectives of ensuring the control of biohazards to protect core facility operators and assure conformity with applicable state and federal policies, standards and guidelines. Of paramount importance is the educational process to inform core laboratories of biosafety principles and policies and to illustrate the technology and process pathways of the core laboratory for biosafety professionals. Elevating awareness of biohazards and the biosafety regulatory landscape among core facility operators is essential for the establishment of a framework for both project and material risk assessment. The goal of the biohazard risk assessment process is to identify the biohazard risk management parameters to conduct the procedure safely and in compliance with applicable regulations. An evaluation of the containment, protective equipment and work practices for the procedure for the level of risk identified is facilitated by the establishment of a core facility registration form for work with biohazards and other biological materials with potential risk. The final step in the biocontainment process is the assumption of Principal Investigator role with full responsibility for the structure of the site-specific biosafety program plan by core facility leadership. The presentation will provide example biohazard protocol reviews and accompanying containment measures for core laboratories at Yale University.

Research on removing reservoir core water sensitivity using the method of ultrasound-chemical agent for enhanced oil recovery.

PubMed

Wang, Zhenjun; Huang, Jiehao

2018-04-01

The phenomenon of water sensitivity often occurs in the oil reservoir core during the process of crude oil production, which seriously affects the efficiency of oil extraction. In recent years, near-well ultrasonic processing technology attaches more attention due to its safety and energy efficient. In this paper, the comparison of removing core water sensitivity by ultrasonic wave, chemical injection and ultrasound-chemical combination technique are investigated through experiments. Results show that: lower ultrasonic frequency and higher power can improve the efficiency of core water sensitivity removal; the effects of removing core water sensitivity under ultrasonic treatment get better with increase of core initial permeability; the effect of removing core water sensitivity using ultrasonic treatment won't get better over time. Ultrasonic treatment time should be controlled in a reasonable range; the effect of removing core water sensitivity using chemical agent alone is slightly better than that using ultrasonic treatment, however, chemical injection could be replaced by ultrasonic treatment for removing core water sensitivity from the viewpoint of oil reservoir protection and the sustainable development of oil field; ultrasound-chemical combination technique has the best effect for water sensitivity removal than using ultrasonic treatment or chemical injection alone. Copyright © 2017 Elsevier B.V. All rights reserved.

Technology and Communications Coursework: Facilitating the Progression of Students with Learning Disabilities through High School Science and Math Coursework.

PubMed

Shifrer, Dara; Callahan, Rebecca

2010-09-01

Students identified with learning disabilities experience markedly lower levels of science and mathematics achievement than students who are not identified with a learning disability. Seemingly compounding their disadvantage, students with learning disabilities also complete more credits in non-core coursework-traditionally considered non-academic coursework-than students who are not identified with a learning disability. The Education Longitudinal Study of 2002, a large national dataset with both regular and special education high school students, is utilized to determine whether credit accumulation in certain types of non-core coursework, such as Technology and Communications courses, is associated with improved science and math course-taking outcomes for students with learning disabilities. Results show that credit accumulation in Technology and Communications coursework uniquely benefits the science course-taking, and comparably benefits the math course-taking, of students identified with learning disabilities in contrast to students who are not identified with a learning disability.

Technology and Communications Coursework: Facilitating the Progression of Students with Learning Disabilities through High School Science and Math Coursework

PubMed Central

Shifrer, Dara; Callahan, Rebecca

2016-01-01

Students identified with learning disabilities experience markedly lower levels of science and mathematics achievement than students who are not identified with a learning disability. Seemingly compounding their disadvantage, students with learning disabilities also complete more credits in non-core coursework—traditionally considered non-academic coursework—than students who are not identified with a learning disability. The Education Longitudinal Study of 2002, a large national dataset with both regular and special education high school students, is utilized to determine whether credit accumulation in certain types of non-core coursework, such as Technology and Communications courses, is associated with improved science and math course-taking outcomes for students with learning disabilities. Results show that credit accumulation in Technology and Communications coursework uniquely benefits the science course-taking, and comparably benefits the math course-taking, of students identified with learning disabilities in contrast to students who are not identified with a learning disability. PMID:27695150

Development concept for a small, split-core, heat-pipe-cooled nuclear reactor

NASA Technical Reports Server (NTRS)

Lantz, E.; Breitwieser, R.; Niederauer, G. F.

1974-01-01

There have been two main deterrents to the development of semiportable nuclear reactors. One is the high development costs; the other is the inability to satisfy with assurance the questions of operational safety. This report shows how a split-core, heat-pipe cooled reactor could conceptually eliminate these deterrents, and examines and summarizes recent work on split-core, heat-pipe reactors. A concept for a small reactor that could be developed at a comparatively low cost is presented. The concept would extend the technology of subcritical radioisotope thermoelectric generators using 238 PuO2 to the evolution of critical space power reactors using 239 PuO2.

A multicore optical fiber for distributed sensing

NASA Astrophysics Data System (ADS)

Sun, Xiaoguang; Li, Jie; Burgess, David T.; Hines, Mike; Zhu, Beyuan

2014-06-01

With advancements in optical fiber technology, the incorporation of multiple sensing functionalities within a single fiber structure opens the possibility to deploy dielectric, fully distributed, long-length optical sensors in an extremely small cross section. To illustrate the concept, we designed and manufactured a multicore optical fiber with three graded-index (GI) multimode (MM) cores and one single mode (SM) core. The fiber was coated with both a silicone primary layer and an ETFE buffer for high temperature applications. The fiber properties such as geometry, crosstalk and attenuation are described. A method for coupling the signal from the individual cores into separate optical fibers is also presented.

Applications of Ferro-Nanofluid on a Micro-Transformer

PubMed Central

Tsai, Tsung-Han; Kuo, Long-Sheng; Chen, Ping-Hei; Lee, Da-sheng; Yang, Chin-Ting

2010-01-01

An on-chip transformer with a ferrofluid magnetic core has been developed and tested. The transformer consists of solenoid-type coil and a magnetic core of ferrofluid, with the former fabricated by MEMS technology and the latter by a chemical co-precipitation method. The performance of the MEMS transformer with a ferrofluid magnetic core was measured and simulated with frequencies ranging from 100 kHz to 100 MHz. Experimental results reveal that the presence of the ferrofluid increases the inductance of coils and the coupling coefficient of transformer; however, it also increases the resistance owing to the lag between the external magnetic field and the magnetization of the material. PMID:22163647

Applications of ferro-nanofluid on a micro-transformer.

PubMed

Tsai, Tsung-Han; Kuo, Long-Sheng; Chen, Ping-Hei; Lee, Da-Sheng; Yang, Chin-Ting

2010-01-01

An on-chip transformer with a ferrofluid magnetic core has been developed and tested. The transformer consists of solenoid-type coil and a magnetic core of ferrofluid, with the former fabricated by MEMS technology and the latter by a chemical co-precipitation method. The performance of the MEMS transformer with a ferrofluid magnetic core was measured and simulated with frequencies ranging from 100 kHz to 100 MHz. Experimental results reveal that the presence of the ferrofluid increases the inductance of coils and the coupling coefficient of transformer; however, it also increases the resistance owing to the lag between the external magnetic field and the magnetization of the material.

Super-channel oriented routing, spectrum and core assignment under crosstalk limit in spatial division multiplexing elastic optical networks

NASA Astrophysics Data System (ADS)

Zhao, Yongli; Zhu, Ye; Wang, Chunhui; Yu, Xiaosong; Liu, Chuan; Liu, Binglin; Zhang, Jie

2017-07-01

With the capacity increasing in optical networks enabled by spatial division multiplexing (SDM) technology, spatial division multiplexing elastic optical networks (SDM-EONs) attract much attention from both academic and industry. Super-channel is an important type of service provisioning in SDM-EONs. This paper focuses on the issue of super-channel construction in SDM-EONs. Mixed super-channel oriented routing, spectrum and core assignment (MS-RSCA) algorithm is proposed in SDM-EONs considering inter-core crosstalk. Simulation results show that MS-RSCA can improve spectrum resource utilization and reduce blocking probability significantly compared with the baseline RSCA algorithms.

Fast Image Subtraction Using Multi-cores and GPUs

NASA Astrophysics Data System (ADS)

Hartung, Steven; Shukla, H.

2013-01-01

Many important image processing techniques in astronomy require a massive number of computations per pixel. Among them is an image differencing technique known as Optimal Image Subtraction (OIS), which is very useful for detecting and characterizing transient phenomena. Like many image processing routines, OIS computations increase proportionally with the number of pixels being processed, and the number of pixels in need of processing is increasing rapidly. Utilizing many-core graphical processing unit (GPU) technology in a hybrid conjunction with multi-core CPU and computer clustering technologies, this work presents a new astronomy image processing pipeline architecture. The chosen OIS implementation focuses on the 2nd order spatially-varying kernel with the Dirac delta function basis, a powerful image differencing method that has seen limited deployment in part because of the heavy computational burden. This tool can process standard image calibration and OIS differencing in a fashion that is scalable with the increasing data volume. It employs several parallel processing technologies in a hierarchical fashion in order to best utilize each of their strengths. The Linux/Unix based application can operate on a single computer, or on an MPI configured cluster, with or without GPU hardware. With GPU hardware available, even low-cost commercial video cards, the OIS convolution and subtraction times for large images can be accelerated by up to three orders of magnitude.

Blade and bladelet production at Hohle Fels Cave, AH IV in the Swabian Jura and its importance for characterizing the technological variability of the Aurignacian in Central Europe

PubMed Central

Conard, Nicholas J.

2018-01-01

Hohle Fels Cave in the Ach Valley of Southwestern Germany exhibits an Aurignacian sequence of 1 m thickness within geological horizons (GH) 6–8. The deposition of the layers took place during mild and cold phases between at least 42 ka (GI 10) and 36 ka calBP (GI 7). We present below a technological study of blade and bladelet production from AH IV (GH 7) at Hohle Fels. Our analyses show that blade manufacture is relatively constant, while bladelet production displays a high degree of variability in order to obtain different blanks. Knappers used a variety of burins as cores to produce fine bladelets. The results reveal a new variant of the Aurignacian in the Swabian Jura primarily characterized by the production of bladelets and microliths from burin-cores. The artefacts from the Swabian Aurignacian are technologically and functionally more diverse than earlier studies of the Geißenklösterle and Vogelherd sequences have suggested. The technological analyses presented here challenge the claim that the typo-chronological system from Southwestern Europe can be applied to the Central European Aurignacian. Instead, we emphasize the impact of technological and functional variables within the Aurignacian of the Swabian Jura. PMID:29630601

Integrated Atmosphere Resource Recovery and Environmental Monitoring Technology Demonstration for Deep Space Exploration

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Abney, Morgan B.; Knox, James C.; Parrish, Keith J.; Roman, Monserrate C.; Jan, Darrell L.

2012-01-01

Exploring the frontiers of deep space continues to be defined by the technological challenges presented by safely transporting a crew to and from destinations of scientific interest. Living and working on that frontier requires highly reliable and efficient life support systems that employ robust, proven process technologies. The International Space Station (ISS), including its environmental control and life support (ECLS) system, is the platform from which humanity's deep space exploration missions begin. The ISS ECLS system Atmosphere Revitalization (AR) subsystem and environmental monitoring (EM) technical architecture aboard the ISS is evaluated as the starting basis for a developmental effort being conducted by the National Aeronautics and Space Administration (NASA) via the Advanced Exploration Systems (AES) Atmosphere Resource Recovery and Environmental Monitoring (ARREM) Project.. An evolutionary approach is employed by the ARREM project to address the strengths and weaknesses of the ISS AR subsystem and EM equipment, core technologies, and operational approaches to reduce developmental risk, improve functional reliability, and lower lifecycle costs of an ISS-derived subsystem architecture suitable for use for crewed deep space exploration missions. The most promising technical approaches to an ISS-derived subsystem design architecture that incorporates promising core process technology upgrades will be matured through a series of integrated tests and architectural trade studies encompassing expected exploration mission requirements and constraints.

[Implementation of good quality and safety practices. Descriptive study in a occupational mutual health centre].

PubMed

Manzanera, R; Plana, M; Moya, D; Ortner, J; Mira, J J

2016-01-01

To describe the level of implementation of quality and safety good practice elements in a Mutual Society health centre. A Cross-sectional study was conducted to assess the level of implementation of good practices using a questionnaire. Some quality dimensions were also assessed (scale 0 to 10) by a set of 87 quality coordinators of health centres and a random sample of 54 healthcare professionals working in small centres. Seventy quality coordinators and 27 professionals replied (response rates 80% and 50%, respectively. There were no differences in the assessment of quality attributes between both groups. They identified as areas for improvement: use of practice guidelines (7.6/10), scientific and technical skills (7.5/10), and patient satisfaction (7.7/10). Availability and accessibility to clinical reports, informed consent, availability of hydro-alcoholic solution, and to record allergies, were considered of high importance to be implemented, with training and research, improvements in equipment and technology plans, adherence to clinical practice guidelines and the preparation of risk maps, being of less importance. The good practices related to equipment and resources have a higher likelihood to be implemented, meanwhile those related to quality and safety attitudes have more barriers before being implemented. The mutual has a similar behaviour than other healthcare institutions. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Optimization of a Centrifugal Impeller Design Through CFD Analysis

NASA Technical Reports Server (NTRS)

Chen, W. C.; Eastland, A. H.; Chan, D. C.; Garcia, Roberto

1993-01-01

This paper discusses the procedure, approach and Rocketdyne CFD results for the optimization of the NASA consortium impeller design. Two different approaches have been investigated. The first one is to use a tandem blade arrangement, the main impeller blade is split into two separate rows with the second blade row offset circumferentially with respect to the first row. The second approach is to control the high losses related to secondary flows within the impeller passage. Many key parameters have been identified and each consortium team member involved will optimize a specific parameter using 3-D CFD analysis. Rocketdyne has provided a series of CFD grids for the consortium team members. SECA will complete the tandem blade study, SRA will study the effect of the splitter blade solidity change, NASA LeRC will evaluate the effect of circumferential position of the splitter blade, VPI will work on the hub to shroud blade loading distribution, NASA Ames will examine the impeller discharge leakage flow impacts and Rocketdyne will continue to work on the meridional contour and the blade leading to trailing edge work distribution. This paper will also present Rocketdyne results from the tandem blade study and from the blade loading distribution study. It is the ultimate goal of this consortium team to integrate the available CFD analysis to design an advanced technology impeller that is suitable for use in the NASA Space Transportation Main Engine (STME) fuel turbopump.

Digital management and regulatory submission of medical images from clinical trials: role and benefits of the core laboratory

NASA Astrophysics Data System (ADS)

Robbins, William L.; Conklin, James J.

1995-10-01

Medical images (angiography, CT, MRI, nuclear medicine, ultrasound, x ray) play an increasingly important role in the clinical development and regulatory review process for pharmaceuticals and medical devices. Since medical images are increasingly acquired and archived digitally, or are readily digitized from film, they can be visualized, processed and analyzed in a variety of ways using digital image processing and display technology. Moreover, with image-based data management and data visualization tools, medical images can be electronically organized and submitted to the U.S. Food and Drug Administration (FDA) for review. The collection, processing, analysis, archival, and submission of medical images in a digital format versus an analog (film-based) format presents both challenges and opportunities for the clinical and regulatory information management specialist. The medical imaging 'core laboratory' is an important resource for clinical trials and regulatory submissions involving medical imaging data. Use of digital imaging technology within a core laboratory can increase efficiency and decrease overall costs in the image data management and regulatory review process.

POWER-BURST FACILITY (PBF) CONCEPTUAL DESIGN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wasserman, A.A.; Johnson, S.O.; Heffner, R.E.

1963-06-21

A description is presented of the conceptual design of a high- performance, pulsed reactor called the Power Burst Facility (PBF). This reactor is designed to generate power bursts with initial asymptotic periods as short as 1 msec, producing energy releases large enough to destroy entire fuel subassemblies placed in a capsule or flow loop mounted in the reactor, all without damage to the reactor itself. It will be used primarily to evaluate the consequences and hazards of very rapid destructive accidents in reactors representing the entire range of current nuclear technology as applied to power generation, propulsion, and testing. Itmore » will also be used to carry out detailed studies of nondestructive reactivity feedback mechanisms in the shortperiod domain. The facility was designed to be sufficiently flexible to accommodate future cores of even more advanced design. The design for the first reactor core is based upon proven technology; hence, completion of the final design of this core will involve no significant development delays. Construction of the PBF is proposed to begin in September 1984, and is expected to take approximately 20 months to complete. (auth)« less

Spanish and Catalan translation, cultural adaptation and validation of the Picker Patient Experience Questionnaire-15.

PubMed

Bertran, M J; Viñarás, M; Salamero, M; Garcia, F; Graham, C; McCulloch, A; Escarrabill, J

To develop and test a culturally adapted core set of questions to measure patients' experience after in-patient care. Following the methodology recommended by international guides, a basic set of patient experience questions, selected from Picker Institute Europe questionnaires (originally in English), was translated to Spanish and Catalan. Acceptability, construct validity and reliability of the adapted questionnaire were assessed via a cross-sectional validation study. The inclusion criteria were patients aged >18 years, discharged within one week to one month prior to questionnaire sending and whose email was available. Day cases, emergency department patients and deaths were excluded. Invitations were sent by email (N=876) and questionnaire was fulfilled through an online platform. An automatic reminder was sent 5 days later to non-respondents. A questionnaire, in Spanish and Catalan, with adequate conceptual and linguistic equivalence was obtained. Response rate was 44.4% (389 responses). The correlation matrix was factorable. Four factors were extracted with Parallel Analysis, which explained 43% of the total variance. First factor: information and communication received during discharge. Second factor: low sensitivity attitudes of professionals. Third factor: assessment of communication of medical and nursing staff. Fourth factor: global items. The value of the Cronbach alpha was 0.84, showing a high internal consistency. The obtained experience patient questionnaire, in Spanish and Catalan, shows good results in the psychometric properties evaluated and could be a useful tool to identify opportunities for health care improvement in our context. Email could become a feasible tool for greater patient participation in everything that concerns his health. Copyright © 2018 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Documenting Differences between Early Stone Age Flake Production Systems: An Experimental Model and Archaeological Verification.

PubMed

Presnyakova, Darya; Archer, Will; Braun, David R; Flear, Wesley

2015-01-01

This study investigates morphological differences between flakes produced via "core and flake" technologies and those resulting from bifacial shaping strategies. We investigate systematic variation between two technological groups of flakes using experimentally produced assemblages, and then apply the experimental model to the Cutting 10 Mid -Pleistocene archaeological collection from Elandsfontein, South Africa. We argue that a specific set of independent variables--and their interactions--including external platform angle, platform depth, measures of thickness variance and flake curvature should distinguish between these two technological groups. The role of these variables in technological group separation was further investigated using the Generalized Linear Model as well as Linear Discriminant Analysis. The Discriminant model was used to classify archaeological flakes from the Cutting 10 locality in terms of their probability of association, within either experimentally developed technological group. The results indicate that the selected independent variables play a central role in separating core and flake from bifacial technologies. Thickness evenness and curvature had the greatest effect sizes in both the Generalized Linear and Discriminant models. Interestingly the interaction between thickness evenness and platform depth was significant and played an important role in influencing technological group membership. The identified interaction emphasizes the complexity in attempting to distinguish flake production strategies based on flake morphological attributes. The results of the discriminant function analysis demonstrate that the majority of flakes at the Cutting 10 locality were not associated with the production of the numerous Large Cutting Tools found at the site, which corresponds with previous suggestions regarding technological behaviors reflected in this assemblage.

Documenting Differences between Early Stone Age Flake Production Systems: An Experimental Model and Archaeological Verification

PubMed Central

Presnyakova, Darya; Archer, Will; Braun, David R.; Flear, Wesley

2015-01-01

This study investigates morphological differences between flakes produced via “core and flake” technologies and those resulting from bifacial shaping strategies. We investigate systematic variation between two technological groups of flakes using experimentally produced assemblages, and then apply the experimental model to the Cutting 10 Mid -Pleistocene archaeological collection from Elandsfontein, South Africa. We argue that a specific set of independent variables—and their interactions—including external platform angle, platform depth, measures of thickness variance and flake curvature should distinguish between these two technological groups. The role of these variables in technological group separation was further investigated using the Generalized Linear Model as well as Linear Discriminant Analysis. The Discriminant model was used to classify archaeological flakes from the Cutting 10 locality in terms of their probability of association, within either experimentally developed technological group. The results indicate that the selected independent variables play a central role in separating core and flake from bifacial technologies. Thickness evenness and curvature had the greatest effect sizes in both the Generalized Linear and Discriminant models. Interestingly the interaction between thickness evenness and platform depth was significant and played an important role in influencing technological group membership. The identified interaction emphasizes the complexity in attempting to distinguish flake production strategies based on flake morphological attributes. The results of the discriminant function analysis demonstrate that the majority of flakes at the Cutting 10 locality were not associated with the production of the numerous Large Cutting Tools found at the site, which corresponds with previous suggestions regarding technological behaviors reflected in this assemblage. PMID:26111251

Core Design Characteristics of the Fluoride Salt-Cooled High Temperature Demonstration Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Nicholas R; Qualls, A L; Betzler, Benjamin R

2016-01-01

Fluoride salt-cooled high temperature reactors (FHRs) are a promising reactor technology option with significant knowledge gaps to implementation. One potential approach to address those technology gaps is via a small-scale demonstration reactor with the goal of increasing the technology readiness level (TRL) of the overall system for the longer term. The objective of this paper is to outline a notional concept for such a system, and to address how the proposed concept would advance the TRL of FHR concepts. Development of the proposed FHR Demonstration Reactor (DR) will enable commercial FHR deployment through disruptive and rapid technology development and demonstration.more » The FHR DR will close remaining gaps to commercial viability. Lower risk technologies are included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated within an acceptable budget and schedule. Important capabilities that will be demonstrated by building and operating the FHR DR include core design methodologies; fabrication and operation of high temperature reactors; salt procurement, handling, maintenance, and ultimate disposal; salt chemistry control to maximize vessel life; tritium management; heat exchanger performance; pump performance; and reactivity control. The FHR DR is considered part of a broader set of FHR technology development and demonstration efforts, some of which are already underway. Nonreactor test efforts (e.g., heated salt loops or loops using simulant fluids) can demonstrate many technologies necessary for commercial deployment of FHRs. The FHR DR, however, fulfills a crucial role in FHR technology development by advancing the technical maturity and readiness level of the system as a whole.« less

Application of the Human Activity Assistive Technology model for occupational therapy research.

PubMed

Giesbrecht, Ed

2013-08-01

Theoretical models provide a framework for describing practice and integrating evidence into systematic research. There are few models that relate specifically to the provision of assistive technology in occupational therapy practice. The Human Activity Assistive Technology model is an enduring example that has continued to develop by integrating a social model of disability, concepts from occupational therapy theory and principles of assistive technology adoption and abandonment. This study first describes the core concepts of the Human Activity Assistive Technology model and reviews its development over three successive published versions. A review of the research literature reflects application of the model to clinical practice, study design, outcome measure selection and interpretation of results, particularly among occupational therapists. An evaluative framework is used to critique the adequacy of the Human Activity Assistive Technology model for practice and research, exploring attributes of clarity, simplicity, generality, accessibility and importance. Finally, recommendations are proposed for continued development of the model and research applications. Most of the existing research literature employs the Human Activity Assistive Technology model for background and study design; there is emerging evidence to support the core concepts as predictive factors. Although the concepts are generally simple, clear and applicable to occupational therapy practice and research, evolving terminology and outcomes become more complex with the conflation of integrated theories. The development of the Human Activity Assistive Technology model offers enhanced access and application for occupational therapists, but poses challenges to clarity among concepts. Suggestions are made for further development and applications of the model. © 2013 Occupational Therapy Australia.

Technology Maturity for the Habitable-zone Exoplanet Imaging Mission (HabEx) Concept

NASA Astrophysics Data System (ADS)

Morgan, Rhonda; Warfield, Keith R.; Stahl, H. Philip; Mennesson, Bertrand; Nikzad, Shouleh; nissen, joel; Balasubramanian, Kunjithapatham; Krist, John; Mawet, Dimitri; Stapelfeldt, Karl; warwick, Steve

2018-01-01

HabEx Architecture A is a 4m unobscured telescope optimized for direct imaging and spectroscopy of potentially habitable exoplanets, and also enables a wide range of general astrophysics science. The exoplanet detection and characterization drives the enabling core technologies. A hybrid starlight suppression approach of a starshade and coronagraph diversifies technology maturation risk. In this poster we assess these exoplanet-driven technologies, including elements of coronagraphs, starshades, mirrors, jitter mitigation, wavefront control, and detectors. By utilizing high technology readiness solutions where feasible, and identifying required technology development that can begin early, HabEx will be well positioned for assessment by the community in 2020 Astrophysics Decadal Survey.

Analyzing the Curricula of Doctor of Philosophy in Educational Technology-Related Programs in the United States

ERIC Educational Resources Information Center

Almaden, Abdullah; Ku, Heng-Yu

2017-01-01

The purpose of this study was to analyze on-campus and online PhD programs in educational technology-related fields in the United States. In particular, it sought to evaluate the most common program titles; core, elective, and research courses based on program curricula. The research design was quantitative content analysis and data were collected…

R&D Investment in New Technology-Based Firms: Strategic and Entrepreneurial Dynamics and the Impact of Universities

ERIC Educational Resources Information Center

Lynskey, Michael J.

2016-01-01

This article examines how two core factors--strategic and entrepreneurial dynamics--influence research and development (R&D) investment in new technology-based firms (NTBFs) using data from a questionnaire survey conducted in Japan. Among the strategic dynamics, it is found that joint R&D projects with universities have a positive,…

Faster vortex core switching with lower current density using three-nanocontact spin-polarized currents in a confined structure

NASA Astrophysics Data System (ADS)

Li, Hua-Nan; Hua, Zhong; Li, Dong-Fei

2017-01-01

Not Available Project supported by the China Postdoctoral Science Foundation (Grant No. 2013M541286), the Science and Technology Planning Project of Jilin Province, China (Grant Nos. 20140520109JH and 20150414003GH), and the “Twelfth Five year” Scientific and Technological Research Project of Department of Education of Jilin Province, China.

Technology and Curriculum Standards: How Well Do Internet-Based Learning Games Support Common Core Standards for Mathematics?

ERIC Educational Resources Information Center

Bingham, Teri; Ray, Jan

2013-01-01

In an effort to keep up with the new generation of digital learners, educators are integrating multiple forms of technology into their teaching, including online learning game applications. The purpose of this study was to determine the degree to which internet-based learning game applications selected by preservice teachers were aligned with the…

Survey of Current and Next Generation Space Power Technologies

DTIC Science & Technology

2006-06-26

different thermodynamic cycles, such as the Brayton, Rankine, and Stirling cycles, alkali metal thermal electric converters ( AMTEC ) and thermionic...efficiencies @ 1700K. The primary issue with this system is the integration of the converter technology into the nuclear reactor core. AMTEC (static...Alkali metal thermal to electric converters ( AMTECs ) are thermally powered electrochemical concentration cells that convert heat energy directly to DC

Cotargeting the lncRNA-PIP3 Interaction and AKT/PI3K Signaling Axis: A Novel Paradigm for Treating Triple-Negative Breast Cancer

DTIC Science & Technology

2017-10-01

Model Core Facility at MD Anderson has generated a genomic deletion of LINK-A using CRISPR /Cas9 technology based on collaboration. The single...Generation of LINK-A deletion mutant using CRISPR /Cas9 technology. A, Illustration of genomic deletion region of LINK-A (Chr1: 238644075-238644134

Promoting Pedagogical Content Knowledge Development for Early Career Secondary Teachers in Science and Technology Using Content Representations

ERIC Educational Resources Information Center

Williams, John; Eames, Chris; Hume, Anne; Lockley, John

2012-01-01

Background: This research addressed the key area of early career teacher education and aimed to explore the use of a "content representation" (CoRe) as a mediational tool to develop early career secondary teacher pedagogical content knowledge (PCK). This study was situated in the subject areas of science and technology, where sound…

Digital Immigrants Teaching Digital Natives: A Phenomenological Study of Higher Education Faculty Perspectives on Technology Integration with English Core Content

ERIC Educational Resources Information Center

Corey, Robert C.

2012-01-01

In the last two decades, technology use has escalated and educators grapple with its advances and integration into the classroom. Issues surrounding what constitutes a literate society, the clarion calls for educational reform emanating from US presidents to parent teacher organizations, and educators' ability to cope with advances in technology…

Technology-Aided Instruction and Intervention for Students with ASD: A Meta-Analysis Using Novel Methods of Estimating Effect Sizes for Single-Case Research

ERIC Educational Resources Information Center

Barton, Erin E.; Pustejovsky, James E.; Maggin, Daniel M.; Reichow, Brian

2017-01-01

The adoption of methods and strategies validated through rigorous, experimentally oriented research is a core professional value of special education. We conducted a systematic review and meta-analysis examining the experimental literature on Technology-Aided Instruction and Intervention (TAII) using research identified as part of the National…

Materials Technology: The Common Core Skills That are Shaping the Future. Final Performance Report. January 1, 1989-June 30, 1990.

ERIC Educational Resources Information Center

Battelle Pacific Northwest Laboratories, Richland, WA.

A materials technology program was developed at Richland High School (Washington) and pilot tested at seven sites in Washington and Oregon. The program created partnerships between science and vocational education teachers at Richland High and Battelle Pacific Northwest Laboratories, and was then expanded to include other high schools, colleges,…

A Stakeholder View of Organizational Adaptation to Technological Change: The Case of U. S. State Universities, 2003-2012

ERIC Educational Resources Information Center

Gould, Robert W.

2013-01-01

This study addressed technological change in the core processes of teaching and learning in U. S. state universities in the decade from 2003-2012. Institutions of higher education in the U. S. have faced dramatically complex and rapidly changing operating environments. In response to these conditions, institutions of higher education have…

The NTeQ ISD Model: A Tech-Driven Model for Digital Natives (DNs)

ERIC Educational Resources Information Center

Williams, C.; Anekwe, J. U.

2017-01-01

Integrating Technology for enquiry (NTeQ) instructional development model (ISD), is believed to be a technology-driven model. The authors x-rayed the ten-step model to reaffirm the ICT knowledge demand of the learner and the educator; hence computer-based activities at various stages of the model are core elements. The model also is conscious of…

Energy efficient engine shroudless, hollow fan blade technology report

NASA Technical Reports Server (NTRS)

Michael, C. J.

1981-01-01

The Shroudless, Hollow Fan Blade Technology program was structured to support the design, fabrication, and subsequent evaluation of advanced hollow and shroudless blades for the Energy Efficient Engine fan component. Rockwell International was initially selected to produce hollow airfoil specimens employing the superplastic forming/diffusion bonding (SPF/DB) fabrication technique. Rockwell demonstrated that a titanium hollow structure could be fabricated utilizing SPF/DB manufacturing methods. However, some problems such as sharp internal cavity radii and unsatisfactory secondary bonding of the edge and root details prevented production of the required quantity of fatigue test specimens. Subsequently, TRW was selected to (1) produce hollow airfoil test specimens utilizing a laminate-core/hot isostatic press/diffusion bond approach, and (2) manufacture full-size hollow prototype fan blades utilizing the technology that evolved from the specimen fabrication effort. TRW established elements of blade design and defined laminate-core/hot isostatic press/diffusion bonding fabrication techniques to produce test specimens. This fabrication technology was utilized to produce full size hollow fan blades in which the HIP'ed parts were cambered/twisted/isothermally forged, finish machined, and delivered to Pratt & Whitney Aircraft and NASA for further evaluation.

[Innovation guidelines and strategies for pharmaceutical engineering of Chinese medicine and their industrial translation].

PubMed

Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

2013-01-01

This paper briefly analyzes the bottlenecks and major technical requirements for pharmaceutical industry of Chinese medicine, providing current status of pharmaceutical engineering of Chinese medicine. The innovation directions and strategies of the pharmaceutical engineering for manufacturing Chinese medicine are proposed along with the framework of their core technology. As a consequence, the development of the third-generation pharmaceutical technology for Chinese medicine, featured as "precision, digital and intelligent", is recommended. The prospects of the pharmaceutical technology are also forecasted.

Sscience & technology review; Science Technology Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. This review for the month of July 1996 discusses: Frontiers of research in advanced computations, The multibeam Fabry-Perot velocimeter: Efficient measurement of high velocities, High-tech tools for the American textile industry, and Rock mechanics: can the Tuff take the stress.

Overview and fundamentals of urologic robot-integrated systems.

PubMed

Allaf, Mohamad; Patriciu, Alexandru; Mazilu, Dumitru; Kavoussi, Louis; Stoianovici, Dan

2004-11-01

Advances in technology have revolutionized urology. Minimally invasive tools now form the core of the urologist's armamentarium. Laparoscopic surgery has become the favored approach for treating many complicated urologic ailments. Surgical robots represent the next evolutionary step in the fruitful man-machine partnership. The introduction of robotic technology in urology changes how urologists learn, teach, plan, and operate. As technology evolves, robots not only will improve performance in minimally invasive procedures, but also enhance other procedures or enable new kinds of operations.

Intelligent Transportation Infrastructure Deployment Analysis System

DOT National Transportation Integrated Search

1997-01-01

Much of the work on Intelligent Transportation Systems (ITS) to date has emphasized technologies, Standards/protocols, architecture, user services, core infrastructure requirements, and various other technical and institutional issues. ITS implementa...

CMS Readiness for Multi-Core Workload Scheduling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perez-Calero Yzquierdo, A.; Balcas, J.; Hernandez, J.

In the present run of the LHC, CMS data reconstruction and simulation algorithms benefit greatly from being executed as multiple threads running on several processor cores. The complexity of the Run 2 events requires parallelization of the code to reduce the memory-per- core footprint constraining serial execution programs, thus optimizing the exploitation of present multi-core processor architectures. The allocation of computing resources for multi-core tasks, however, becomes a complex problem in itself. The CMS workload submission infrastructure employs multi-slot partitionable pilots, built on HTCondor and GlideinWMS native features, to enable scheduling of single and multi-core jobs simultaneously. This provides amore » solution for the scheduling problem in a uniform way across grid sites running a diversity of gateways to compute resources and batch system technologies. This paper presents this strategy and the tools on which it has been implemented. The experience of managing multi-core resources at the Tier-0 and Tier-1 sites during 2015, along with the deployment phase to Tier-2 sites during early 2016 is reported. The process of performance monitoring and optimization to achieve efficient and flexible use of the resources is also described.« less

CMS readiness for multi-core workload scheduling

NASA Astrophysics Data System (ADS)

Perez-Calero Yzquierdo, A.; Balcas, J.; Hernandez, J.; Aftab Khan, F.; Letts, J.; Mason, D.; Verguilov, V.

2017-10-01

In the present run of the LHC, CMS data reconstruction and simulation algorithms benefit greatly from being executed as multiple threads running on several processor cores. The complexity of the Run 2 events requires parallelization of the code to reduce the memory-per- core footprint constraining serial execution programs, thus optimizing the exploitation of present multi-core processor architectures. The allocation of computing resources for multi-core tasks, however, becomes a complex problem in itself. The CMS workload submission infrastructure employs multi-slot partitionable pilots, built on HTCondor and GlideinWMS native features, to enable scheduling of single and multi-core jobs simultaneously. This provides a solution for the scheduling problem in a uniform way across grid sites running a diversity of gateways to compute resources and batch system technologies. This paper presents this strategy and the tools on which it has been implemented. The experience of managing multi-core resources at the Tier-0 and Tier-1 sites during 2015, along with the deployment phase to Tier-2 sites during early 2016 is reported. The process of performance monitoring and optimization to achieve efficient and flexible use of the resources is also described.

Development Approach of the Advanced Life Support On-line Project Information System

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Hogan, John A.; Morrow, Rich; Ho, Michael C.; Kaehms, Bob; Cavazzoni, Jim; Brodbeck, Christina A.; Whitaker, Dawn R.

2005-01-01

The Advanced Life Support (ALS) Program has recently accelerated an effort to develop an On-line Project Information System (OPIS) for research project and technology development data centralization and sharing. There has been significant advancement in the On-line Project Information System (OPIS) over the past year (Hogan et al, 2004). This paper presents the resultant OPIS development approach. OPIS is being built as an application framework consisting of an uderlying Linux/Apache/MySQL/PHP (LAMP) stack, and supporting class libraries that provides database abstraction and automatic code generation, simplifying the ongoing development and maintenance process. Such a development approach allows for quick adaptation to serve multiple Programs, although initial deployment is for an ALS module. OPIS core functionality will involve a Web-based annual solicitation of project and technology data directly from ALS Principal Investigators (PIs) through customized data collection forms. Data provided by PIs will be reviewed by a Technical Task Monitor (TTM) before posting the information to OPIS for ALS Community viewing via the Web. Such Annual Reports will be permanent, citable references within OPIS. OPlS core functionality will also include Project Home Sites, which will allow PIS to provide updated technology information to the Community in between Annual Report updates. All data will be stored in an object-oriented relational database, created in MySQL(Reistered Trademark) and located on a secure server at NASA Ames Research Center (ARC). Upon launch, OPlS can be utilized by Managers to identify research and technology development (R&TD) gaps and to assess task performance. Analysts can employ OPlS to obtain the current, comprehensive, accurate information about advanced technologies that is required to perform trade studies of various life support system options. ALS researchers and technology developers can use OPlS to achieve an improved understanding of the NASA and ALS Program needs and to understand how other researchers and technology developers are addressing those needs. OPlS core functionality will launch for 'Ihe ALS Program in October, 2005. However, the system has been developed with the ability to evolve with Program needs. Because of open-source construction, software costs are minimized. Any functionality that is technologically feasible can be built into OPIS, and OPlS can expand through module cloning and adaptation, to any level deemed useful to the Agency.

Core Noise Reduction

NASA Technical Reports Server (NTRS)

Hultgren, Lennart S.

2011-01-01

This presentation is a technical summary of and outlook for NASA-internal and NASA-sponsored external research on core (combustor and turbine) noise funded by the Fundamental Aeronautics Program Subsonic Fixed Wing (SFW) Project. Sections of the presentation cover: the SFW system-level noise metrics for the 2015, 2020, and 2025 timeframes; turbofan design trends and their aeroacoustic implications; the emerging importance of core noise and its relevance to the SFW Reduce-Perceived-Noise Technical Challenge; and the current research activities in the core noise area. Recent work1 on the turbine-transmission loss of combustor noise is briefly described, two2,3 new NRA efforts in the core-noise area are outlined, and an effort to develop CMC-based acoustic liners for broadband noise reduction suitable for turbofan-core application is delineated. The NASA Fundamental Aeronautics Program has the principal objective of overcoming today's national challenges in air transportation. The reduction of aircraft noise is critical to enabling the anticipated large increase in future air traffic. The Subsonic Fixed Wing Project's Reduce-Perceived-Noise Technical Challenge aims to develop concepts and technologies to dramatically reduce the perceived aircraft noise outside of airport boundaries.

Disaster and Contingency Planning for Scientific Shared Resource Cores

PubMed Central

Wilkerson, Amy

2016-01-01

Progress in biomedical research is largely driven by improvements, innovations, and breakthroughs in technology, accelerating the research process, and an increasingly complex collaboration of both clinical and basic science. This increasing sophistication has driven the need for centralized shared resource cores (“cores”) to serve the scientific community. From a biomedical research enterprise perspective, centralized resource cores are essential to increased scientific, operational, and cost effectiveness; however, the concentration of instrumentation and resources in the cores may render them highly vulnerable to damage from severe weather and other disasters. As such, protection of these assets and the ability to recover from a disaster is increasingly critical to the mission and success of the institution. Therefore, cores should develop and implement both disaster and business continuity plans and be an integral part of the institution’s overall plans. Here we provide an overview of key elements required for core disaster and business continuity plans, guidance, and tools for developing these plans, and real-life lessons learned at a large research institution in the aftermath of Superstorm Sandy. PMID:26848285

HowTo - Easy use of global unique identifier

NASA Astrophysics Data System (ADS)

Czerniak, A.; Fleischer, D.; Schirnick, C.

2013-12-01

The GEOMAR sample- and core repository covers several thousands of samples and cores and was collected over the last decades. In the actual project, we bring this collection up to the new generation and tag every sample and core with a unique identifier, in our case the International Geo Sample Number (ISGN). This work is done with our digital Ink and hand writing recognition implementation. The Smart Pen technology was save time and resources to record the information on every sample or core. In the procedure of recording, there are several steps systematical are done: 1. Getting all information about the core or sample, such as cruise number, responsible person and so on. 2. Tag with unique identifiers, in our case a QR-Code. 3. Wrote down the location of sample or core. After transmitting the information from Smart Pen, actually via USB but wireless is a choice too, into our server infrastructure the link to other information began. As it linked in our Virtual Research Environment (VRE) with the unique identifier (ISGN) sample or core can be located and the QR-Code was simply linked back from core or sample to ISGN with additional scientific information. On the QR-Code all important information are on it and it was simple to produce thousand of it.

Global Combat Support System-Marine Corps Proof-of-Concept for Dashboard Analytics

DTIC Science & Technology

2014-12-01

The core is modern, commercial-off-the-shelf enterprise resource planning ( ERP ) software (Oracle 11i e-Business Suite). GCSS-MCs design is focused...factor in the decision to implement this new software . GCSS-MC is the technology centerpiece of the Logistics Modernization (LogMod) Program...GCSS-MC is based on the implementation of Oracle e-Business Suite 11i as the core software package. This is the same infrastructure that Oracle

JPRS Report Science and Technology, Japan: Atomic Energy Society 1989 Annual Meeting.

DTIC Science & Technology

1989-10-13

Control Rod Hole in VHTRC-1 Core [F, Akino, T, Yamane, et al.] ,,, 5 Measurement of MEU [Medium Enriched Uranium ] Fuel Element Characteristics in...K. Yoshida, K. Kobayashi, I. Kimura , C. Yamanaka, and S. Nakai, Laser Laboratory,, Osaka University. Nuclear Reactor Laboratory, Kyoto University...1 core loaded with 278 fuel rods (4 percent enriched uranium ). The PNS target was placed at the back center of the 1/2 assembly on the fixed side

Research and Development in the U.S. Army Corps of Engineers: Improving the Common Stock of Knowledge

DTIC Science & Technology

2011-08-01

instrumentation researchers such as Eugene Woodman, Francis Hanes, L.H. Daniels, and Leo F. Ingram developed instru- ments ranging from high-speed cameras to...dredging involved computer modeling of various prob- lems, and CERC helped in the development of technologies such as breakwater designs, CORE- LOC ...of hydraulic engineering and modeling, bridge scour analysis, development of the CORE- LOC Concrete Armoring and Samoa Stone products for coastal

Additively manufactured MEMS multiplexed coaxial electrospray sources for high-throughput, uniform generation of core-shell microparticles.

PubMed

Olvera-Trejo, D; Velásquez-García, L F

2016-10-18

This study reports the first MEMS multiplexed coaxial electrospray sources in the literature. Coaxial electrospraying is a microencapsulation technology based on electrohydrodynamic jetting of two immiscible liquids, which allows precise control with low size variation of the geometry of the core-shell particles it generates, which is of great importance in numerous biomedical and engineering applications, e.g., drug delivery and self-healing composites. By implementing monolithic planar arrays of miniaturized coaxial electrospray emitters that work uniformly in parallel, the throughput of the compound microdroplet source is greatly increased, making the microencapsulation technology compatible with low-cost commercial applications. Miniaturized core-shell particle generators with up to 25 coaxial electrospray emitters (25 emitters cm -2 ) were fabricated via stereolithography, which is an additive manufacturing process that can create complex microfluidic devices at a small fraction of the cost per device and fabrication time associated with silicon-based counterparts. The characterization of devices with the same emitter structure but different array sizes demonstrates uniform array operation. Moreover, the data demonstrate that the per-emitter current is approximately proportional to the square root of the flow rate of the driving liquid, and it is independent of the flow rate of the driven liquid, as predicted by the theory. The core/shell diameters and the size distribution of the generated compound microparticles can be modulated by controlling the flow rates fed to the emitters.

Switchable and responsive liquid crystal-functionalized microfibers produced via coaxial electrospinning

NASA Astrophysics Data System (ADS)

Lagerwall, Jan P. F.

2012-03-01

"Wearable technology" or "smart textiles" are concepts that are very rapidly gaining in attention around the world, as industry as well as academia are making major advances in integrating advanced devices with various textiles around our household. The technological challenges involved in this development are however considerable, calling for new solutions, new materials and truly original thinking. An attractive approach to realize certain classes of wearable devices may be to use textile fibers functionalized by responsive materials such as liquid crystals, normally not connected to textiles. We can produce non-woven textiles with such fibers by means of electrospinning, a technique for producing very thin polymer fibers that can be uniform or with core-sheath geometries. Since the core can be made out of traditionally non-spinnable materials we can use coaxial electrospinning (one fluid spun inside another) to produce composite fibers with a core of liquid crystal inside a polymer sheath. The resulting fibers constitute an entirely new configuration for applying liquid crystals, giving the fibers functionality and responsiveness. For instance, with a cholesteric core we can produce non-woven mats with iridescent color that can be tuned (or removed) e.g. by heating or cooling. In this paper I describe our method of producing these novel functionalized fibers and their characterization, and I will discuss the directions for future research and application possibilities, e.g. in clothing-integrated sensors and indicators.

The Utilization of the Microflora Indigenous to and Present in Oil-Bearing Formations to Selectively Plug the More Porous Zones Thereby Increasing Oil Recovery During Waterflooding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Lewis R.; Stephens, James O.; Vadie, Alex A.

The objective of this work is to demonstrate the use of indigenous microbes as a method of profile control in waterfloods. It is expected that as the microbial population is induced to increase, that the expanded biomass will selectively block the more permeable zones of the reservoir thereby forcing injection water to flow through the less permeable zones which will result in improved sweep efficiency. This increase in microbial population will be accomplished by injecting a nutrient solution into four injectors. Four other injectors will act as control wells. During Phase I, two wells will be cored through the zonemore » of interest. The core will be subjected to special core analyses in order to arrive at the optimum nutrient formulation. During Phase II, nutrient injection will begin, the results monitored, and adjustments to the nutrient composition made, if necessary. Phase II also will include the drilling of three wells for post-mortem core analysis. Phase III will focus on technology transfer of the results. It should be pointed out that one expected outcome of this new technology will be a prolongation of economical waterflooding operations, i.e. economical oil recovery should continue for much longer periods in the producing wells subjected to this selective plugging technique.« less

A flexible tactile sensitive sheet using a hetero-core fiber optic sensor

NASA Astrophysics Data System (ADS)

Fujino, S.; Yamazaki, H.; Hosoki, A.; Watanabe, K.

2014-05-01

In this report, we have designed a tactile sensitive sheet based on a hetero-core fiber-optic sensor, which realize an areal sensing by using single sensor potion in one optical fiber line. Recently, flexible and wide-area tactile sensing technology is expected to applied to acquired biological information in living space and robot achieve long-term care services such as welfare and nursing-care and humanoid technology. A hetero-core fiber-optic sensor has several advantages such as thin and flexible transmission line, immunity to EMI. Additionally this sensor is sensitive to moderate bending actions with optical loss changes and is independent of temperature fluctuation. Thus, the hetero-core fiber-optic sensor can be suitable for areal tactile sensing. We measure pressure characteristic of the proposed sensitive sheet by changing the pressure position and pinching characteristic on the surface. The proposed tactile sensitive sheet shows monotonic responses on the whole sensitive sheet surface although different sensitivity by the position is observed at the sensitive sheet surface. Moreover, the tactile sensitive sheet could sufficiently detect the pinching motion. In addition, in order to realize the discrimination between pressure and pinch, we fabricated a doubled-over sensor using a set of tactile sensitive sheets, which has different kinds of silicon robbers as a sensitive sheet surface. In conclusion, the flexible material could be given to the tactile sensation which is attached under proposed sensitive sheet.

The MARTE VNIR imaging spectrometer experiment: design and analysis.

PubMed

Brown, Adrian J; Sutter, Brad; Dunagan, Stephen

2008-10-01

We report on the design, operation, and data analysis methods employed on the VNIR imaging spectrometer instrument that was part of the Mars Astrobiology Research and Technology Experiment (MARTE). The imaging spectrometer is a hyperspectral scanning pushbroom device sensitive to VNIR wavelengths from 400-1000 nm. During the MARTE project, the spectrometer was deployed to the Río Tinto region of Spain. We analyzed subsets of three cores from Río Tinto using a new band modeling technique. We found most of the MARTE drill cores to contain predominantly goethite, though spatially coherent areas of hematite were identified in Core 23. We also distinguished non Fe-bearing minerals that were subsequently analyzed by X-ray diffraction (XRD) and found to be primarily muscovite. We present drill core maps that include spectra of goethite, hematite, and non Fe-bearing minerals.

The MARTE VNIR Imaging Spectrometer Experiment: Design and Analysis

NASA Astrophysics Data System (ADS)

Brown, Adrian J.; Sutter, Brad; Dunagan, Stephen

2008-10-01

We report on the design, operation, and data analysis methods employed on the VNIR imaging spectrometer instrument that was part of the Mars Astrobiology Research and Technology Experiment (MARTE). The imaging spectrometer is a hyperspectral scanning pushbroom device sensitive to VNIR wavelengths from 400-1000 nm. During the MARTE project, the spectrometer was deployed to the Río Tinto region of Spain. We analyzed subsets of three cores from Río Tinto using a new band modeling technique. We found most of the MARTE drill cores to contain predominantly goethite, though spatially coherent areas of hematite were identified in Core 23. We also distinguished non Fe-bearing minerals that were subsequently analyzed by X-ray diffraction (XRD) and found to be primarily muscovite. We present drill core maps that include spectra of goethite, hematite, and non Fe-bearing minerals.

NASA CORE: Central Operation of Resources for Educators-Educational Materials Catalog

NASA Technical Reports Server (NTRS)

1998-01-01

The NASA Central Operation of Resources for Educators (CORE), established in cooperation with Lorain County Joint Vocational School, serves as the worldwide distribution center for NASA-produced educational materials. For a minimal charge, CORE will provide a valuable service to educators unable to visit one of the NASA Educator Resource Centers by making NASA educational audiovisual materials available through its mail order service. Through CORE's distribution network, the public has access to more than 200 videocassette, slide, and CD-ROM programs, chronicling NASA!s state-of-the-art research and technology. Through the use of these curriculum supplement materials, teachers can provide their students with the latest in aerospace information. NASAs educational materials on aeronautics and space provide a springboard for classroom discussion of life science, physical science, astronomy, energy, Earth resources, environment, mathematics, and career education.

Core Fueling of DEMO by Direct Line Injection of High-Speed Pellets From the HFS

DOE PAGES

Frattolillo, Antonio; Baylor, Larry R.; Bombarda, Francesca; ...

2018-04-17

Pellet injection represents to date the most realistic candidate technology for core fueling of a demonstration fusion power reactor tokamak fusion reactor. Modeling of both pellet penetration and fuel deposition profiles, for different injection locations, indicates that effective core fuelling can be achieved launching pellets from the inboard high field side at speeds not less than ~ 1 km/s. Inboard pellet fueling is commonly achieved in present tokamaks, using curved guide tubes; however, this technology might be hampered at velocities ≥ 1 km/s. An innovative approach, aimed at identifying suitable inboard "direct line'' paths, to inject high-speed pellets (in themore » 3 to 4 km/s range), has recently been proposed as a potential complementary solution. The fuel deposition profiles achievable by this approach have been explored using the HPI2 simulation code. The results presented here show that there are possible geometrical schemes providing good fueling performance. The problem of neutron flux in a direct line-of-sight injection path is being investigated, though preliminary analyses indicate that, perhaps, this is not a serious problem. The identification and integration of straight injection paths suitably tilted may be a rather difficult task due to the many constraints and to interference with existing structures. The suitability of straight guide tubes to reduce the scatter cone of high-speed pellets is, therefore, of main interest. A preliminary investigation, aimed at addressing these technological issues, has recently been started. As a result, a possible implementation plan, using an existing Italian National Agency for New Technologies, Energy and Sustainable Economic Development-Oak Ridge National Laboratory facility is shortly outlined.« less

The HTA Core Model®-10 Years of Developing an International Framework to Share Multidimensional Value Assessment.

PubMed

Kristensen, Finn Børlum; Lampe, Kristian; Wild, Claudia; Cerbo, Marina; Goettsch, Wim; Becla, Lidia

2017-02-01

The HTA Core Model ® as a science-based framework for assessing dimensions of value was developed as a part of the European network for Health Technology Assessment project in the period 2006 to 2008 to facilitate production and sharing of health technology assessment (HTA) information, such as evidence on efficacy and effectiveness and patient aspects, to inform decisions. It covers clinical value as well as organizational, economic, and patient aspects of technologies and has been field-tested in two consecutive joint actions in the period 2010 to 2016. A large number of HTA institutions were involved in the work. The model has undergone revisions and improvement after iterations of piloting and can be used in a local, national, or international context to produce structured HTA information that can be taken forward by users into their own frameworks to fit their specific needs when informing decisions on technology. The model has a broad scope and offers a common ground to various stakeholders through offering a standard structure and a transparent set of proposed HTA questions. It consists of three main components: 1) the HTA ontology, 2) methodological guidance, and 3) a common reporting structure. It covers domains such as effectiveness, safety, and economics, and also includes domains covering organizational, patient, social, and legal aspects. There is a full model and a focused rapid relative effectiveness assessment model, and a third joint action is to continue till 2020. The HTA Core Model is now available for everyone around the world as a framework for assessing value. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Oil-Free Turbomachinery Team Passed Milestone on Path to the First Oil-Free Turbine Aircraft Engine

NASA Technical Reports Server (NTRS)

Bream, Bruce L.

2002-01-01

The Oil-Free Turbine Engine Technology Project team successfully demonstrated a foil-air bearing designed for the core rotor shaft of a turbine engine. The bearings were subjected to test conditions representative of the engine core environment through a combination of high speeds, sustained loads, and elevated temperatures. The operational test envelope was defined during conceptual design studies completed earlier this year by bearing manufacturer Mohawk Innovative Technologies and the turbine engine company Williams International. The prototype journal foil-air bearings were tested at the NASA Glenn Research Center. Glenn is working with Williams and Mohawk to create a revolution in turbomachinery by developing the world's first Oil-Free turbine aircraft engine. NASA's General Aviation Propulsion project and Williams International recently developed the FJX-2 turbofan engine that is being commercialized as the EJ-22. This core bearing milestone is a first step toward a future version of the EJ-22 that will take advantage of recent advances in foil-air bearings by eliminating the need for oil lubrication systems and rolling element bearings. Oil-Free technology can reduce engine weight by 15 percent and let engines operate at very high speeds, yielding power density improvements of 20 percent, and reducing engine maintenance costs. In addition, with NASA coating technology, engines can operate at temperatures up to 1200 F. Although the project is still a couple of years from a full engine test of the bearings, this milestone shows that the bearing design exceeds the expected environment, thus providing confidence that an Oil-Free turbine aircraft engine will be attained. The Oil-Free Turbomachinery Project is supported through the Aeropropulsion Base Research Program.

e-Health readiness assessment factors and measuring tools: A systematic review.

PubMed

Yusif, Salifu; Hafeez-Baig, Abdul; Soar, Jeffrey

2017-11-01

The evolving, adoption and high failure nature of health information technology (HIT)/IS/T systems requires effective readiness assessment to avert increasing failures while increasing system benefits. However, literature on HIT readiness assessment is myriad and fragmented. This review bares the contours of the available literature concluding in a set of manageable and usable recommendations for policymakers, researchers, individuals and organizations intending to assess readiness for any HIT implementation. Identify studies, analyze readiness factors and offer recommendations. Published articles 1995-2016 were searched using Medline/PubMed, Cinahl, Web of Science, PsychInfo, ProQuest. Studies were included if they were assessing IS/T/mHealth readiness in the context of HIT. Articles not written in English were excluded. Themes that emerged in the process of the data synthesis were thematically analysed and interpreted. Analyzed themes were found across 63 articles. In accordance with their prevalence of use, they included but not limited to "Technological readiness", 30 (46%); "Core/Need/Motivational readiness", 23 (37%); "Acceptance and use readiness", 19 (29%); "Organizational readiness", 20 (21%); "IT skills/Training/Learning readiness" (18%), "Engagement readiness", 16 (24%) and "Societal readiness" (14%). Despite their prevalence in use, "Technological readiness", "Motivational readiness" and "Engagement readiness" all had myriad and unreliable measuring tools. Core readiness had relatively reliable measuring tools, which repeatedly been used in various readiness assessment studies CONCLUSION: Thus, there is the need for reliable measuring tools for even the most commonly used readiness assessment factors/constructs: Core readiness, Engagement and buy-ins readiness, Technological readiness and IT Skills readiness as this could serve as an immediate step in conducting effective/reliable e-Health readiness assessment, which could lead to reduced HIT implementation failures. Copyright © 2017 Elsevier B.V. All rights reserved.

Core Fueling of DEMO by Direct Line Injection of High-Speed Pellets From the HFS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frattolillo, Antonio; Baylor, Larry R.; Bombarda, Francesca

Pellet injection represents to date the most realistic candidate technology for core fueling of a demonstration fusion power reactor tokamak fusion reactor. Modeling of both pellet penetration and fuel deposition profiles, for different injection locations, indicates that effective core fuelling can be achieved launching pellets from the inboard high field side at speeds not less than ~ 1 km/s. Inboard pellet fueling is commonly achieved in present tokamaks, using curved guide tubes; however, this technology might be hampered at velocities ≥ 1 km/s. An innovative approach, aimed at identifying suitable inboard "direct line'' paths, to inject high-speed pellets (in themore » 3 to 4 km/s range), has recently been proposed as a potential complementary solution. The fuel deposition profiles achievable by this approach have been explored using the HPI2 simulation code. The results presented here show that there are possible geometrical schemes providing good fueling performance. The problem of neutron flux in a direct line-of-sight injection path is being investigated, though preliminary analyses indicate that, perhaps, this is not a serious problem. The identification and integration of straight injection paths suitably tilted may be a rather difficult task due to the many constraints and to interference with existing structures. The suitability of straight guide tubes to reduce the scatter cone of high-speed pellets is, therefore, of main interest. A preliminary investigation, aimed at addressing these technological issues, has recently been started. As a result, a possible implementation plan, using an existing Italian National Agency for New Technologies, Energy and Sustainable Economic Development-Oak Ridge National Laboratory facility is shortly outlined.« less

Precision and manufacturing at the Lawrence Livermore National Laboratory

NASA Technical Reports Server (NTRS)

Saito, Theodore T.; Wasley, Richard J.; Stowers, Irving F.; Donaldson, Robert R.; Thompson, Daniel C.

1994-01-01

Precision Engineering is one of the Lawrence Livermore National Laboratory's core strengths. This paper discusses the past and present current technology transfer efforts of LLNL's Precision Engineering program and the Livermore Center for Advanced Manufacturing and Productivity (LCAMP). More than a year ago the Precision Machine Commercialization project embodied several successful methods of transferring high technology from the National Laboratories to industry. Currently, LCAMP has already demonstrated successful technology transfer and is involved in a broad spectrum of current programs. In addition, this paper discusses other technologies ripe for future transition including the Large Optics Diamond Turning Machine.

Network security.

PubMed

Chang, Kyle

2006-01-01

As you can see, there are a number of different ways to protect your network with different protocols, all of which can be very confusing to people whose core business process is not technology. This article is only a brief synopsis of the dangers that lurk in the corners of the technology world. Therefore, the best course of action is to do as much research as possible rather than falling into a situation of risk and vulnerability by implementing a system or network that does not work with your business. Remember, the technology is there to support your business; the business should not have to work around the technology.