Fuzzy forecasting based on two-factors second-order fuzzy-trend logical relationship groups and particle swarm optimization techniques.

PubMed

Chen, Shyi-Ming; Manalu, Gandhi Maruli Tua; Pan, Jeng-Shyang; Liu, Hsiang-Chuan

2013-06-01

In this paper, we present a new method for fuzzy forecasting based on two-factors second-order fuzzy-trend logical relationship groups and particle swarm optimization (PSO) techniques. First, we fuzzify the historical training data of the main factor and the secondary factor, respectively, to form two-factors second-order fuzzy logical relationships. Then, we group the two-factors second-order fuzzy logical relationships into two-factors second-order fuzzy-trend logical relationship groups. Then, we obtain the optimal weighting vector for each fuzzy-trend logical relationship group by using PSO techniques to perform the forecasting. We also apply the proposed method to forecast the Taiwan Stock Exchange Capitalization Weighted Stock Index and the NTD/USD exchange rates. The experimental results show that the proposed method gets better forecasting performance than the existing methods.

Cross-national and longitudinal investigation of a short measure of workaholism.

PubMed

Rantanen, Johanna; Feldt, Taru; Hakanen, Jari J; Kokko, Katja; Huhtala, Mari; Pulkkinen, Lea; Schaufeli, Wilmar

2015-01-01

The present study investigated the factor structure of the 10-item version of the Dutch Work Addiction Scale (DUWAS). The DUWAS-10 is intended to measure workaholism with two correlated factors: working excessively (WE) and working compulsively (WC). The factor structure of the DUWAS-10 was examined among multi-occupational samples from the Netherlands (n=9,010) and Finland (n=4,567) using confirmatory factor analysis (CFA). CFAs revealed that the expected correlated two-factor solution showed satisfactory fit to the data. However, a second-order factor solution, where WE comprised the first-order factors "working frantically" and "working long hours", and WC the first-order factors "obsessive work drive" and "unease if not working", showed significantly better fit to the data. The expectation of factorial group invariance of the second-order factor structure between the Dutch and Finnish samples was also supported. Moreover, factorial time invariance was observed across a two-year time lag in a sub-sample of Finnish managers (n=459). In conclusion, the DUWAS-10 was found to be a comprehensive measure of workaholism, meeting the criteria of factorial validity in multiple settings, and can thus be recommended for use in both research and practice.

A New, More Powerful Approach to Multitrait-Multimethod Analyses: An Application of Second-Order Confirmatory Factor Analysis.

ERIC Educational Resources Information Center

Marsh, Herbert W.; Hocevar, Dennis

The advantages of applying confirmatory factor analysis (CFA) to multitrait-multimethod (MTMM) data are widely recognized. However, because CFA as traditionally applied to MTMM data incorporates single indicators of each scale (i.e., each trait/method combination), important weaknesses are the failure to: (1) correct appropriately for measurement…

A second-order all-digital phase-locked loop

NASA Technical Reports Server (NTRS)

Holmes, J. K.; Tegnelia, C. R.

1974-01-01

A simple second-order digital phase-locked loop has been designed to synchronize itself to a square-wave subcarrier. Analysis and experimental performance are given for both acquisition behavior and steady-state phase error performance. In addition, the damping factor and the noise bandwidth are derived analytically. Although all the data are given for the square-wave subcarrier case, the results are applicable to arbitrary subcarriers that are odd symmetric about their transition region.

Validation study of the Questionnaire on School Maladjustment Problems (QSMP).

PubMed

de la Fuente Arias, Jesús; Peralta Sánchez, Francisco Javier; Sánchez Roda, María Dolores; Trianes Torres, María Victoria

2012-05-01

The aim of this study was to analyze the exploratory and confirmatory structure, as well as other psychometric properties, of the Cuestionario de Problemas de Convivencia Escolar (CPCE; in Spanish, the Questionnaire on School Maladjustment Problems [QSMP]), using a sample of Spanish adolescents. The instrument was administered to 60 secondary education teachers (53.4% females and 46.6% males) between the ages of 28 and 54 years (M= 41.2, SD= 11.5), who evaluated a total of 857 adolescent students. The first-order exploratory factor analysis identified 7 factors, explaining a total variance of 62%. A second-order factor analysis yielded three dimensions that explain 84% of the variance. A confirmatory factor analysis was subsequently performed in order to reduce the number of factors obtained in the exploratory analysis as well as the number of items. Lastly, we present the results of reliability, internal consistency, and validity indices. These results and their implications for future research and for the practice of educational guidance and intervention are discussed in the conclusions.

Cross-cultural adaptation, validation and factor structure of the Insight Scale for Affective Disorders.

PubMed

de Assis da Silva, Rafael; Mograbi, Daniel C; Camelo, Evelyn V M; Morton, Gregory Duff; Landeira-Fernandez, J; Cheniaux, Elie

2015-06-01

In the last few decades, several tools for studying insight in bipolar disorders have been used. Olaya and colleagues developed the Insight Scale for Affective Disorders (ISAD), which consists of a scale measuring insight through hetero evaluation for patients with mood disorders. The objective of this work is to translate and adapt the original English version of the ISAD to Brazilian Portuguese (ISAD-BR) and to conduct an evaluation of its psychometric properties. Adaptation procedures included translation/back-translation and consultation with a panel of experts. 95 patients with the diagnosis of Type 1 bipolar disorder were evaluated with the final version of the ISAD-BR, which was applied, simultaneously, but independently, by two examiners. Internal consistency and inter-rater reliability were explored and the latent structure of the scale was investigated with principal axis factoring and promax rotation. A second-order factor analysis was conducted to test if the scale had a hierarchical factor structure. The ISAD-BR showed good internal consistency and good inter-rater reliability. The analysis pointed to a four-factor solution of the ISAD-BR: awareness of symptoms associated with activity/energy; awareness of having a disorder; awareness of self-esteem and feelings of pleasure; and awareness of social functioning and relationships. The second order factor analysis indicated a hierarchical factor structure for the ISAD-BR, with the four lower-order factors loading on a single higher-order factor. Insight into bipolar disorder is a multidimensional construct, covering different aspects of the condition and its symptomatology. Nevertheless, insight about activity/energy changes may be a crucial aspect of insight into bipolar disorder. Copyright © 2015 Elsevier B.V. All rights reserved.

Operator Factorization and the Solution of Second-Order Linear Ordinary Differential Equations

ERIC Educational Resources Information Center

Robin, W.

2007-01-01

The theory and application of second-order linear ordinary differential equations is reviewed from the standpoint of the operator factorization approach to the solution of ordinary differential equations (ODE). Using the operator factorization approach, the general second-order linear ODE is solved, exactly, in quadratures and the resulting…

Psychometric structure of the Chinese Multiethnic Adolescent Cultural Identity Questionnaire.

PubMed

Hu, Fa-Wen; Wang, Pei; Li, Li-Ju

2014-12-01

In this study, we used the Chinese Multiethnic Adolescent Cultural Identity Questionnaire (CMACIQ) and collected valid data from 1,036 participants to systematically examine the mental model of cultural identity in Chinese multiethnic adolescents. Exploratory factor analysis and structural equation modeling were performed on the data to discover the factor structure and dimensions of cultural identity. The psychometric properties of the scale were rigorously validated in 2,744 new multiethnic participants from 5 native ethnic groups in Yunnan province in China. The results indicated that CMACIQ had reasonable metric properties and good fit indices. The hierarchical model of cultural identity consisted of 2 second-order factors, Ethnic Cultural Identity and Mainstream Cultural Identity in School. The first higher order factor was composed of preference for ethnic things, ethnic acceptance, religious belief, and ethnic convention, while the second comprised 2 first-order factors, Social Norms and Dominant Culture. The potential application and limitations of CMACIQ are discussed. (c) 2014 APA, all rights reserved.

New robust bilinear least squares method for the analysis of spectral-pH matrix data.

PubMed

Goicoechea, Héctor C; Olivieri, Alejandro C

2005-07-01

A new second-order multivariate method has been developed for the analysis of spectral-pH matrix data, based on a bilinear least-squares (BLLS) model achieving the second-order advantage and handling multiple calibration standards. A simulated Monte Carlo study of synthetic absorbance-pH data allowed comparison of the newly proposed BLLS methodology with constrained parallel factor analysis (PARAFAC) and with the combination multivariate curve resolution-alternating least-squares (MCR-ALS) technique under different conditions of sample-to-sample pH mismatch and analyte-background ratio. The results indicate an improved prediction ability for the new method. Experimental data generated by measuring absorption spectra of several calibration standards of ascorbic acid and samples of orange juice were subjected to second-order calibration analysis with PARAFAC, MCR-ALS, and the new BLLS method. The results indicate that the latter method provides the best analytical results in regard to analyte recovery in samples of complex composition requiring strict adherence to the second-order advantage. Linear dependencies appear when multivariate data are produced by using the pH or a reaction time as one of the data dimensions, posing a challenge to classical multivariate calibration models. The presently discussed algorithm is useful for these latter systems.

[Tool for measuring occupational stress: a nurses' stress inventory].

PubMed

Stacciarini, J M; Tróccoli, B T

2000-12-01

We present an exploratory study aiming at constructing an inventory to measure occupational stress in nurses ("Inventário de Estresse em Enfermeiros"--IEE). A set of items was initially constructed from previously defined categories based on interviews with nurses and then improved through semantic analysis by referees and a pilot-test with nursing students. A sample of 461 nurses--workers from the public services of the Federal District--who answered the IEE was used in the study. Factorial analysis indicated the presence of a second-order global factor and three first-order factors: Interpersonal Relationships, Stressful Career Roles and Intrinsic Job Factors.

A novel second-order standard addition analytical method based on data processing with multidimensional partial least-squares and residual bilinearization.

PubMed

Lozano, Valeria A; Ibañez, Gabriela A; Olivieri, Alejandro C

2009-10-05

In the presence of analyte-background interactions and a significant background signal, both second-order multivariate calibration and standard addition are required for successful analyte quantitation achieving the second-order advantage. This report discusses a modified second-order standard addition method, in which the test data matrix is subtracted from the standard addition matrices, and quantitation proceeds via the classical external calibration procedure. It is shown that this novel data processing method allows one to apply not only parallel factor analysis (PARAFAC) and multivariate curve resolution-alternating least-squares (MCR-ALS), but also the recently introduced and more flexible partial least-squares (PLS) models coupled to residual bilinearization (RBL). In particular, the multidimensional variant N-PLS/RBL is shown to produce the best analytical results. The comparison is carried out with the aid of a set of simulated data, as well as two experimental data sets: one aimed at the determination of salicylate in human serum in the presence of naproxen as an additional interferent, and the second one devoted to the analysis of danofloxacin in human serum in the presence of salicylate.

Cross-national and longitudinal investigation of a short measure of workaholism

PubMed Central

RANTANEN, Johanna; FELDT, Taru; HAKANEN, Jari J; KOKKO, Katja; HUHTALA, Mari; PULKKINEN, Lea; SCHAUFELI, Wilmar

2014-01-01

Abstract: The present study investigated the factor structure of the 10-item version of the Dutch Work Addiction Scale (DUWAS). The DUWAS-10 is intended to measure workaholism with two correlated factors: working excessively (WE) and working compulsively (WC). The factor structure of the DUWAS-10 was examined among multi-occupational samples from the Netherlands (n=9,010) and Finland (n=4,567) using confirmatory factor analysis (CFA). CFAs revealed that the expected correlated two-factor solution showed satisfactory fit to the data. However, a second-order factor solution, where WE comprised the first-order factors “working frantically” and “working long hours”, and WC the first-order factors “obsessive work drive” and “unease if not working”, showed significantly better fit to the data. The expectation of factorial group invariance of the second-order factor structure between the Dutch and Finnish samples was also supported. Moreover, factorial time invariance was observed across a two-year time lag in a sub-sample of Finnish managers (n=459). In conclusion, the DUWAS-10 was found to be a comprehensive measure of workaholism, meeting the criteria of factorial validity in multiple settings, and can thus be recommended for use in both research and practice. PMID:25382382

Ability Structure in 10-11 Year-Old Children and the Theory of Fluid and Crystallized Intelligence

ERIC Educational Resources Information Center

Undheim, Johan Olav

1976-01-01

Using a simple structure factor analysis of test data of 144 fourth grade children in Norway, second order factors interpreted to represent Broad Visualization, Speediness, Fluid, and Crystallized intelligence intercorrelated substantially, the correlation between Fluid and Crystallized intelligence being the highest. (Author/BW)

First and Higher Order Effects on Zero Order Radiative Transfer Model

NASA Astrophysics Data System (ADS)

Neelam, M.; Mohanty, B.

2014-12-01

Microwave radiative transfer model are valuable tool in understanding the complex land surface interactions. Past literature has largely focused on local sensitivity analysis for factor priotization and ignoring the interactions between the variables and uncertainties around them. Since land surface interactions are largely nonlinear, there always exist uncertainties, heterogeneities and interactions thus it is important to quantify them to draw accurate conclusions. In this effort, we used global sensitivity analysis to address the issues of variable uncertainty, higher order interactions, factor priotization and factor fixing for zero-order radiative transfer (ZRT) model. With the to-be-launched Soil Moisture Active Passive (SMAP) mission of NASA, it is very important to have a complete understanding of ZRT for soil moisture retrieval to direct future research and cal/val field campaigns. This is a first attempt to use GSA technique to quantify first order and higher order effects on brightness temperature from ZRT model. Our analyses reflect conditions observed during the growing agricultural season for corn and soybeans in two different regions in - Iowa, U.S.A and Winnipeg, Canada. We found that for corn fields in Iowa, there exist significant second order interactions between soil moisture, surface roughness parameters (RMS height and correlation length) and vegetation parameters (vegetation water content, structure and scattering albedo), whereas in Winnipeg, second order interactions are mainly due to soil moisture and vegetation parameters. But for soybean fields in both Iowa and Winnipeg, we found significant interactions only to exist between soil moisture and surface roughness parameters.

Cognitive and Socio-Affective Outcomes of Project-Based Learning: Perceptions of Greek Second Chance School Students

ERIC Educational Resources Information Center

Koutrouba, Konstantina; Karageorgou, Elissavet

2013-01-01

The present questionnaire-based study was conducted in 2010 in order to examine 677 Greek Second Chance School (SCS) students' perceptions about the cognitive and socio-affective outcomes of project-based learning. Data elaboration, statistical and factor analysis showed that the participants found that project-based learning offered a second…

Development of an Individualism-Collectivism Scale revisited: a Korean sample.

PubMed

Kim, Kitae; Cho, Bongsoon

2011-04-01

A 13-item Individualism-Collectivism scale comprising source of identity, goal priority, mode of social relation, and norm acceptance is presented. A validation of this scale was conducted using a survey of 773 Korean employees. An exploratory factor analysis and a second-order confirmatory factor analysis supported the measure as having theoretical face validity and acceptable internal consistency reliability. Among the four facets, goal priority most strongly predicted the general Individualism-Collectivism latent factor.

Factorial invariance of the Dyadic Adjustment Scale across gender.

PubMed

South, Susan C; Krueger, Robert F; Iacono, William G

2009-12-01

The Dyadic Adjustment Scale (DAS; G. B. Spanier, 1976) is the most widely used inventory of relationship satisfaction in the social sciences, yet the question of whether it is measuring the same concept in men and women has never been addressed. In the current study, the authors examined the factor structure of the DAS in a sample of 900 currently married couples who participated in the Minnesota Twin Family Study. Confirmatory factor analysis was applied to a second-order factor solution with Spanier's four factors (Dyadic Consensus, Dyadic Satisfaction, Dyadic Cohesion, Affectional Expression) loading on one higher order factor (Relationship Adjustment), to test for measurement invariance across gender. The second-order solution was relatively invariant across gender, even when taking into account the nonindependent nature of the data. This suggests that the best conceptualization of the DAS is one of a gender-invariant measure of marital adjustment with four distinct subfactors and that differences between men and women on any of these constructs can be interpreted by both clinicians and researchers as true mean differences rather than measurement bias.

A Structural and Correlational Analysis of Two Common Measures of Personal Epistemology

ERIC Educational Resources Information Center

Laster, Bonnie Bost

2010-01-01

Scope and Method of Study: The current inquiry is a factor analytic study which utilizes first and second order factor analytic methods to examine the internal structures of two measurements of personal epistemological beliefs: the Schommer Epistemological Questionnaire (SEQ) and Epistemic Belief Inventory (EBI). The study also examines the…

Development and Validation of Two Scales to Measure Elaboration and Behaviors Associated with Stewardship in Children

ERIC Educational Resources Information Center

Vezeau, Susan Lynn; Powell, Robert B.; Stern, Marc J.; Moore, D. DeWayne; Wright, Brett A.

2017-01-01

This investigation examines the development of two scales that measure elaboration and behaviors associated with stewardship in children. The scales were developed using confirmatory factor analysis to investigate their construct validity, reliability, and psychometric properties. Results suggest that a second-order factor model structure provides…

An Analysis of Demotivators in the EFL Classroom

ERIC Educational Resources Information Center

Sakai, Hideki; Kikuchi, Keita

2009-01-01

Demotivation is a relatively new issue in the field of second language (L2) motivation. In this study, we review previous studies that investigated demotivation of learners of English in order to identify common demotivating factors and report a survey study which explored demotivating factors for Japanese high school students. A 35-item…

Towards a Probabilistic Preliminary Design Criterion for Buckling Critical Composite Shells

NASA Technical Reports Server (NTRS)

Arbocz, Johann; Hilburger, Mark W.

2003-01-01

A probability-based analysis method for predicting buckling loads of compression-loaded laminated-composite shells is presented, and its potential as a basis for a new shell-stability design criterion is demonstrated and discussed. In particular, a database containing information about specimen geometry, material properties, and measured initial geometric imperfections for a selected group of laminated-composite cylindrical shells is used to calculate new buckling-load "knockdown factors". These knockdown factors are shown to be substantially improved, and hence much less conservative than the corresponding deterministic knockdown factors that are presently used by industry. The probability integral associated with the analysis is evaluated by using two methods; that is, by using the exact Monte Carlo method and by using an approximate First-Order Second- Moment method. A comparison of the results from these two methods indicates that the First-Order Second-Moment method yields results that are conservative for the shells considered. Furthermore, the results show that the improved, reliability-based knockdown factor presented always yields a safe estimate of the buckling load for the shells examined.

Relationship between stress-related psychosocial work factors and suboptimal health among Chinese medical staff: a cross-sectional study.

PubMed

Liang, Ying-Zhi; Chu, Xi; Meng, Shi-Jiao; Zhang, Jie; Wu, Li-Juan; Yan, Yu-Xiang

2018-03-06

The study aimed to develop and validate a model to measure psychosocial factors at work among medical staff in China based on confirmatory factor analysis (CFA). The second aim of the current study was to clarify the association between stress-related psychosocial work factors and suboptimal health status. The cross-sectional study was conducted using clustered sampling method. Xuanwu Hospital, a 3A grade hospital in Beijing. Nine hundred and fourteen medical staff aged over 40 years were sampled. Seven hundred and ninety-seven valid questionnaires were collected and used for further analyses. The sample included 94% of the Han population. The Copenhagen Psychosocial Questionnaire (COPSOQ) and the Suboptimal Health Status Questionnaires-25 were used to assess the psychosocial factors at work and suboptimal health status, respectively. CFA was conducted to establish the evaluating method of COPSOQ. A multivariate logistic regression model was used to estimate the relationship between suboptimal health status and stress-related psychosocial work factors among Chinese medical staff. There was a strong correlation among the five dimensions of COPSOQ based on the first-order factor model. Then, we established two second-order factors including negative and positive psychosocial work stress factors to evaluate psychosocial factors at work, and the second-order factor model fit well. The high score in negative (OR (95% CI)=1.47 (1.34 to 1.62), P<0.001) and positive (OR (95% CI)=0.96 (0.94 to 0.98), P<0.001) psychosocial work factors increased and decreased the risk of suboptimal health, respectively. This relationship remained statistically significant after adjusting for confounders and when using different cut-offs of suboptimal health status. Among medical staff, the second-order factor model was a suitable method to evaluate the COPSOQ. The negative and positive psychosocial work stress factors might be the risk and protective factors of suboptimal health, respectively. Moreover, negative psychosocial work stress was the most associated factor to predict suboptimal health. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Relationship between stress-related psychosocial work factors and suboptimal health among Chinese medical staff: a cross-sectional study

PubMed Central

Meng, Shi-Jiao; Zhang, Jie; Wu, Li-Juan; Yan, Yu-Xiang

2018-01-01

Objectives The study aimed to develop and validate a model to measure psychosocial factors at work among medical staff in China based on confirmatory factor analysis (CFA). The second aim of the current study was to clarify the association between stress-related psychosocial work factors and suboptimal health status. Design The cross-sectional study was conducted using clustered sampling method. Setting Xuanwu Hospital, a 3A grade hospital in Beijing. Participants Nine hundred and fourteen medical staff aged over 40 years were sampled. Seven hundred and ninety-seven valid questionnaires were collected and used for further analyses. The sample included 94% of the Han population. Main outcome measures The Copenhagen Psychosocial Questionnaire (COPSOQ) and the Suboptimal Health Status Questionnaires-25 were used to assess the psychosocial factors at work and suboptimal health status, respectively. CFA was conducted to establish the evaluating method of COPSOQ. A multivariate logistic regression model was used to estimate the relationship between suboptimal health status and stress-related psychosocial work factors among Chinese medical staff. Results There was a strong correlation among the five dimensions of COPSOQ based on the first-order factor model. Then, we established two second-order factors including negative and positive psychosocial work stress factors to evaluate psychosocial factors at work, and the second-order factor model fit well. The high score in negative (OR (95% CI)=1.47 (1.34 to 1.62), P<0.001) and positive (OR (95% CI)=0.96 (0.94 to 0.98), P<0.001) psychosocial work factors increased and decreased the risk of suboptimal health, respectively. This relationship remained statistically significant after adjusting for confounders and when using different cut-offs of suboptimal health status. Conclusions Among medical staff, the second-order factor model was a suitable method to evaluate the COPSOQ. The negative and positive psychosocial work stress factors might be the risk and protective factors of suboptimal health, respectively. Moreover, negative psychosocial work stress was the most associated factor to predict suboptimal health. PMID:29511008

Measurement Invariance of Second-Order Factor Model of the Multifactor Leadership Questionnaire (MLQ) across K-12 Principal Gender

ERIC Educational Resources Information Center

Xu, Lihua; Wubbena, Zane; Stewart, Trae

2016-01-01

Purpose: The purpose of this paper is to investigate the factor structure and the measurement invariance of the Multifactor Leadership Questionnaire (MLQ) across gender of K-12 school principals (n=6,317) in the USA. Design/methodology/approach: Nine first-order factor models and four second-order factor models were tested using confirmatory…

Assessing Strategies to Manage Work and Life Balance of Athletic Trainers Working in the National Collegiate Athletic Association Division I Setting

PubMed Central

Mazerolle, Stephanie M.; Pitney, William A.; Casa, Douglas J.; Pagnotta, Kelly D.

2011-01-01

Abstract Context: Certified athletic trainers (ATs) working at the National Collegiate Athletic Association Division I level experience challenges balancing their professional and personal lives. However, an understanding of the strategies ATs use to promote a balance between their professional and personal lives is lacking. Objective: To identify the strategies ATs employed in the Division I setting use to establish a balance between their professional and personal lives. Design: Qualitative investigation using inductive content analysis. Setting: Athletic trainers employed at Division I schools from 5 National Athletic Trainers' Association districts. Patients or Other Participants: A total of 28 (15 women, 13 men) ATs aged 35 ± 9 years volunteered for the study. Data Collection and Analysis: Asynchronous electronic interviews with follow-up phone interviews. Data were analyzed using inductive content analysis. Peer review, member checking, and data-source triangulation were conducted to establish trustworthiness. Results: Three higher-order themes emerged from the analysis. The initial theme, antecedents of work–family conflict, focused on the demands of the profession, flexibility of work schedules, and staffing patterns as contributing to work–life conflict for this group of ATs. The other 2 emergent higher-order themes, professional factors and personal factors, describe the components of a balanced lifestyle. The second-order theme of constructing the professional factors included both organizational policies and individual strategies, whereas the second-order theme of personal factors was separation of work and life and a supportive personal network. Conclusions: Long work hours, lack of control over work schedules, and unbalanced athlete-to-AT ratios can facilitate conflicts. However, as demonstrated by our results, several organizational and personal strategies can be helpful in creating a balanced lifestyle. PMID:21391805

Selective sex differences in declarative memory.

PubMed

Maitland, Scott B; Herlitz, Agneta; Nyberg, Lars; Bäckman, Lars; Nilsson, Lars-Göran

2004-10-01

Sex invariance of a six-factor, higher order model of declarative memory (two second-order factors: episodic and semantic memory; and four first-order factors: recall, recognition, fluency, and knowledge) was established for 1,796 participants (35-85 years). Metric invariance of first- and second-order factor loadings across sex was demonstrated. At the second-order level, a female advantage was observed for both episodic and semantic memory. At the first-order level, sex differences in episodic memory were apparent for both recall and recognition, whereas the differences in semantic memory were driven by a female superiority in fluency. Additional tests of sex differences in three age groups (35-50, 55-65, and 70-85 years of age) indicated that the female superiority in declarative memory diminished with advancing age. The factor-specific sex differences are discussed in relation to sex differences in hippocampal function.

Confirmatory factor analysis of the female sexual function index.

PubMed

Opperman, Emily A; Benson, Lindsay E; Milhausen, Robin R

2013-01-01

The Female Sexual Functioning Index (Rosen et al., 2000 ) was designed to assess the key dimensions of female sexual functioning using six domains: desire, arousal, lubrication, orgasm, satisfaction, and pain. A full-scale score was proposed to represent women's overall sexual function. The fifth revision to the Diagnostic and Statistical Manual (DSM) is currently underway and includes a proposal to combine desire and arousal problems. The objective of this article was to evaluate and compare four models of the Female Sexual Functioning Index: (a) single-factor model, (b) six-factor model, (c) second-order factor model, and (4) five-factor model combining the desire and arousal subscales. Cross-sectional and observational data from 85 women were used to conduct a confirmatory factor analysis on the Female Sexual Functioning Index. Local and global goodness-of-fit measures, the chi-square test of differences, squared multiple correlations, and regression weights were used. The single-factor model fit was not acceptable. The original six-factor model was confirmed, and good model fit was found for the second-order and five-factor models. Delta chi-square tests of differences supported best fit for the six-factor model validating usage of the six domains. However, when revisions are made to the DSM-5, the Female Sexual Functioning Index can adapt to reflect these changes and remain a valid assessment tool for women's sexual functioning, as the five-factor structure was also supported.

Exploring the general motor ability construct.

PubMed

Ibrahim, Halijah; Heard, N Paul; Blanksby, Brian

2011-10-01

Malaysian students ages 12 to 15 years (N = 330; 165 girls, 165 boys) took the Australian Institute of Sport Talent Identification Test (AIST) and the Balance and Movement Coordination Test (BMC), developed specifically to identify sport talent in Malaysian adolescents. To investigate evidence for general aptitude ("g") in motor ability, a higher-order factor analysis was applied to the motor skills subtests from the AIST and BMC. First-order principal components analysis indicated that scores for the adolescent boys and girls could be described by similar sets of specific motor abilities. In particular, sets of skills identified as Movement Coordination and Postural Control were found, with Balancing Ability also emerging. For the girls, a factor labeled Static Balance was indicated. However, for the boys a more general balance ability labeled Kinesthetic Integration was found, along with an ability labeled Explosive Power. These first-order analyses accounted for 45% to 60% of the variance in the scores on the motor skills tests for the boys and girls, respectively. Separate second-order factor analyses for the boys and girls extracted a single higher-order factor, which was consistent with the existence of a motoric "g".

Investigation of second-order hyperpolarizability of some organic compounds

NASA Astrophysics Data System (ADS)

Tajalli, H.; Zirak, P.; Ahmadi, S.

2003-04-01

In this work, we have measured the second order hyperpolarizability of some organic materials with (EFISH) method and also calculated the second order hyperpolarizability of 13 organic compound with Mopac6 software and investigated the different factors that affect the amount of second order hyperpolarizability and ways to increase it.

Cognitive Abilities as Expressions of Three "Ways of Knowing."

ERIC Educational Resources Information Center

Diamond, Stephen R.; Royce, Joseph R.

1980-01-01

Factor analytic studies suggest that there are six replicable second order cognitive factors. These six factors lend themselves to being interpreted as aspects of Royce's three ways of knowing: conceptual, perceptual, or symbolical. This view provides a unified explanation of the second and third order factors. (Author/CTM)

Modeling Ability Differentiation in the Second-Order Factor Model

ERIC Educational Resources Information Center

Molenaar, Dylan; Dolan, Conor V.; van der Maas, Han L. J.

2011-01-01

In this article we present factor models to test for ability differentiation. Ability differentiation predicts that the size of IQ subtest correlations decreases as a function of the general intelligence factor. In the Schmid-Leiman decomposition of the second-order factor model, we model differentiation by introducing heteroscedastic residuals,…

Multi-Group Covariance and Mean Structure Modeling of the Relationship between the WAIS-III Common Factors and Sex and Educational Attainment in Spain

ERIC Educational Resources Information Center

Dolan, Conor V.; Colom, Roberto; Abad, Francisco J.; Wicherts, Jelte M.; Hessen, David J.; van de Sluis, Sophie

2006-01-01

We investigated sex effects and the effects of educational attainment (EA) on the covariance structure of the WAIS-III in a subsample of the Spanish standardization data. We fitted both first order common factor models and second order common factor models. The latter include general intelligence ("g") as a second order common factor.…

Assessing strategies to manage work and life balance of athletic trainers working in the National Collegiate Athletic Association Division I setting.

PubMed

Mazerolle, Stephanie M; Pitney, William A; Casa, Douglas J; Pagnotta, Kelly D

2011-01-01

Certified athletic trainers (ATs) working at the National Collegiate Athletic Association Division I level experience challenges balancing their professional and personal lives. However, an understanding of the strategies ATs use to promote a balance between their professional and personal lives is lacking. To identify the strategies ATs employed in the Division I setting use to establish a balance between their professional and personal lives. Qualitative investigation using inductive content analysis. Athletic trainers employed at Division I schools from 5 National Athletic Trainers' Association districts. A total of 28 (15 women, 13 men) ATs aged 35 ± 9 years volunteered for the study. Asynchronous electronic interviews with follow-up phone interviews. Data were analyzed using inductive content analysis. Peer review, member checking, and data-source triangulation were conducted to establish trustworthiness. Three higher-order themes emerged from the analysis. The initial theme, antecedents of work-family conflict, focused on the demands of the profession, flexibility of work schedules, and staffing patterns as contributing to work-life conflict for this group of ATs. The other 2 emergent higher-order themes, professional factors and personal factors, describe the components of a balanced lifestyle. The second-order theme of constructing the professional factors included both organizational policies and individual strategies, whereas the second-order theme of personal factors was separation of work and life and a supportive personal network. Long work hours, lack of control over work schedules, and unbalanced athlete-to-AT ratios can facilitate conflicts. However, as demonstrated by our results, several organizational and personal strategies can be helpful in creating a balanced lifestyle.

Design and development of second order MEMS sound pressure gradient sensor

NASA Astrophysics Data System (ADS)

Albahri, Shehab

The design and development of a second order MEMS sound pressure gradient sensor is presented in this dissertation. Inspired by the directional hearing ability of the parasitoid fly, Ormia ochracea, a novel first order directional microphone that mimics the mechanical structure of the fly's ears and detects the sound pressure gradient has been developed. While the first order directional microphones can be very beneficial in a large number of applications, there is great potential for remarkable improvements in performance through the use of second order systems. The second order directional microphone is able to provide a theoretical improvement in Sound to Noise ratio (SNR) of 9.5dB, compared to the first-order system that has its maximum SNR of 6dB. Although second order microphone is more sensitive to sound angle of incidence, the nature of the design and fabrication process imposes different factors that could lead to deterioration in its performance. The first Ormia ochracea second order directional microphone was designed in 2004 and fabricated in 2006 at Binghamton University. The results of the tested parts indicate that the Ormia ochracea second order directional microphone performs mostly as an Omni directional microphone. In this work, the previous design is reexamined and analyzed to explain the unexpected results. A more sophisticated tool implementing a finite element package ANSYS is used to examine the previous design response. This new tool is used to study different factors that used to be ignored in the previous design, mainly; response mismatch and fabrication uncertainty. A continuous model using Hamilton's principle is introduced to verify the results using the new method. Both models agree well, and propose a new way for optimizing the second order directional microphone using geometrical manipulation. In this work we also introduce a new fabrication process flow to increase the fabrication yield. The newly suggested method uses the shell layered analysis method in ANSYS. The developed models simulate the fabricated chips at different stages; with the stress at each layer is introduced using thermal loading. The results indicate a new fabrication process flow to increase the rigidity of the composite layers, and countering the deformation caused by the high stress in the thermal oxide layer.

Cognitive Vulnerabilities and Depression in Young Adults: An ROC Curves Analysis.

PubMed

Balsamo, Michela; Imperatori, Claudio; Sergi, Maria Rita; Belvederi Murri, Martino; Continisio, Massimo; Tamburello, Antonino; Innamorati, Marco; Saggino, Aristide

2013-01-01

Objectives and Methods. The aim of the present study was to evaluate, by means of receiver operating characteristic (ROC) curves, whether cognitive vulnerabilities (CV), as measured by three well-known instruments (the Beck Hopelessness Scale, BHS; the Life Orientation Test-Revised, LOT-R; and the Attitudes Toward Self-Revised, ATS-R), independently discriminate between subjects with different severities of depression. Participants were 467 young adults (336 females and 131 males), recruited from the general population. The subjects were also administered the Beck Depression Inventory-II (BDI-II). Results. Four first-order (BHS Optimism/Low Standard; BHS Pessimism; Generalized Self-Criticism; and LOT Optimism) and two higher-order factors (Pessimism/Negative Attitudes Toward Self, Optimism) were extracted using Principal Axis Factoring analysis. Although all first-order and second-order factors were able to discriminate individuals with different depression severities, the Pessimism factor had the best performance in discriminating individuals with moderate to severe depression from those with lower depression severity. Conclusion. In the screening of young adults at risk of depression, clinicians have to pay particular attention to the expression of pessimism about the future.

Brazil-Portugal Transcultural Adaptation of the UWES-9: Internal Consistency, Dimensionality, and Measurement Invariance

PubMed Central

Sinval, Jorge; Pasian, Sonia; Queirós, Cristina; Marôco, João

2018-01-01

The aim of this paper is to present a revision of international versions of the Utrecht Work Engagement Scale and to describe the psychometric properties of a Portuguese version of the UWES-9 developed simultaneously for Brazil and Portugal, the validity evidence related with the internal structure, namely, Dimensionality, measurement invariance between Brazil and Portugal, and Reliability of the scores. This is the first UWES version developed simultaneously for both countries, and it is an important instrument for understanding employees' work engagement in the organizations, allowing human resources departments to better use workforces, especially when they are migrants. A total of 524 Brazilian workers and 522 Portuguese workers participated in the study. Confirmatory Factor Analysis, group comparisons, and Reliability estimates were used. The use of workers who were primarily professionals or administrative support, according to ISCO-08, reinforced the need to collect data on other professional occupations. Confirmatory factor analysis showed acceptable fit for the UWES-9 original three-factor solution, and a second-order factor structure has been proposed that presented an acceptable fit. Full-scale invariance was obtained between the Portuguese and Brazilian samples, both for the original three-factor first-order and second-order models. Data revealed that Portuguese and Brazilian workers didn't show statistically significant differences in the work engagement dimensions. This version allows for direct comparisons of means and, consequently, for performance of comparative and cross-cultural studies between these two countries. PMID:29618995

The construct validity and reliability of the Turkish version of Spreitzer's psychological empowerment scale

PubMed Central

2010-01-01

Background Today, many organizations have adopted some kind of empowerment initiative for at least part of their workforce. Over the last two decades, two complementary perspectives on empowerment at work have emerged: structural and psychological empowerment. Psychological empowerment is a motivational construct manifested in four cognitions: meaning, competence, self-determination and impact. The aim of this article is to examine the construct validity and reliability of the Turkish translation of Spreitzer's psychological empowerment scale in a culturally diverse environment. Methods The scale contains four dimensions over 12 statements. Data were gathered from 260 nurses and 161 physicians. The dimensionality of the scale was evaluated by exploratory factor analyses. To investigate the multidimensional nature of the empowerment construct and the validity of the scale, first- and second-order confirmatory factor analysis was conducted. Furthermore, Cronbach alpha coefficients were assessed to investigate reliability. Results Exploratory factor analyses revealed that four factors in both solutions. The first- and second-order factor analysis indicated an acceptable fit between the data and the theoretical model for nurses and physicians. Cronbach alpha coefficients varied between 0.81-0.94 for both groups, which may be considered satisfactory. Conclusions The analyses indicated that the psychometric properties of the Turkish version of the scale can be considered satisfactory. PMID:20214770

Psychometric Properties of the Bermond-Vorst Alexithymia Questionnaire (BVAQ) in the General Population and a Clinical Population.

PubMed

de Vroege, Lars; Emons, Wilco H M; Sijtsma, Klaas; van der Feltz-Cornelis, Christina M

2018-01-01

The Bermond-Vorst Alexithymia Questionnaire (BVAQ) has been validated in student samples and small clinical samples, but not in the general population; thus, representative general-population norms are lacking. We examined the factor structure of the BVAQ in Longitudinal Internet Studies for the Social Sciences panel data from the Dutch general population ( N  = 974). Factor analyses revealed a first-order five-factor model and a second-order two-factor model. However, in the second-order model, the factor interpreted as analyzing ability loaded on both the affective factor and the cognitive factor. Further analyses showed that the first-order test scores are more reliable than the second-order test scores. External and construct validity were addressed by comparing BVAQ scores with a clinical sample of patients suffering from somatic symptom and related disorder (SSRD) ( N  = 235). BVAQ scores differed significantly between the general population and patients suffering from SSRD, suggesting acceptable construct validity. Age was positively associated with alexithymia. Males showed higher levels of alexithymia. The BVAQ is a reliable alternative measure for measuring alexithymia.

Association of Birth Order with Cardiovascular Disease Risk Factors in Young Adulthood: A Study of One Million Swedish Men

PubMed Central

Jelenkovic, Aline; Silventoinen, Karri; Tynelius, Per; Myrskylä, Mikko; Rasmussen, Finn

2013-01-01

Background Birth order has been suggested to be linked to several cardiovascular disease (CVD) risk factors, but the evidence is still inconsistent. We aim to determine the associations of birth order with body mass index (BMI), muscle strength and blood pressure. Further we will analyse whether these relationships are affected by family characteristics. Methods BMI, elbow flexion, hand grip and knee extension strength and systolic and diastolic blood pressure were measured at conscription examination in 1 065 710 Swedish young men born between 1951 and 1975. The data were analysed using linear multivariate and fixed effects regression models; the latter compare siblings and account for genetic and social factors shared by brothers. Results Fixed effect regression analysis showed that birth order was inversely associated with BMI: second and third born had 0.8% and 1.1% (p<0.001) lower BMI than first-born, respectively. The association pattern differed among muscle strengths. After adjustment for BMI, first-born presented lower elbow flexion and hand grip strength than second-born (−5.9 N and −3.8 N, respectively, p<0.001). Knee extension strength was inversely related to birth order though not always significantly. The association between birth order and blood pressure was not significant. Conclusions Birth order is negatively associated with BMI and knee extension strength, positively with elbow flexion and hand grip strength, and is not associated with blood pressure among young men. Although the effects are small, the link between birth order and some CVD risk factors is already detectable in young adulthood. PMID:23696817

Association of birth order with cardiovascular disease risk factors in young adulthood: a study of one million Swedish men.

PubMed

Jelenkovic, Aline; Silventoinen, Karri; Tynelius, Per; Myrskylä, Mikko; Rasmussen, Finn

2013-01-01

Birth order has been suggested to be linked to several cardiovascular disease (CVD) risk factors, but the evidence is still inconsistent. We aim to determine the associations of birth order with body mass index (BMI), muscle strength and blood pressure. Further we will analyse whether these relationships are affected by family characteristics. BMI, elbow flexion, hand grip and knee extension strength and systolic and diastolic blood pressure were measured at conscription examination in 1,065,710 Swedish young men born between 1951 and 1975. The data were analysed using linear multivariate and fixed effects regression models; the latter compare siblings and account for genetic and social factors shared by brothers. Fixed effect regression analysis showed that birth order was inversely associated with BMI: second and third born had 0.8% and 1.1% (p<0.001) lower BMI than first-born, respectively. The association pattern differed among muscle strengths. After adjustment for BMI, first-born presented lower elbow flexion and hand grip strength than second-born (-5.9 N and -3.8 N, respectively, p<0.001). Knee extension strength was inversely related to birth order though not always significantly. The association between birth order and blood pressure was not significant. Birth order is negatively associated with BMI and knee extension strength, positively with elbow flexion and hand grip strength, and is not associated with blood pressure among young men. Although the effects are small, the link between birth order and some CVD risk factors is already detectable in young adulthood.

Second order finite-difference ghost-point multigrid methods for elliptic problems with discontinuous coefficients on an arbitrary interface

NASA Astrophysics Data System (ADS)

Coco, Armando; Russo, Giovanni

2018-05-01

In this paper we propose a second-order accurate numerical method to solve elliptic problems with discontinuous coefficients (with general non-homogeneous jumps in the solution and its gradient) in 2D and 3D. The method consists of a finite-difference method on a Cartesian grid in which complex geometries (boundaries and interfaces) are embedded, and is second order accurate in the solution and the gradient itself. In order to avoid the drop in accuracy caused by the discontinuity of the coefficients across the interface, two numerical values are assigned on grid points that are close to the interface: a real value, that represents the numerical solution on that grid point, and a ghost value, that represents the numerical solution extrapolated from the other side of the interface, obtained by enforcing the assigned non-homogeneous jump conditions on the solution and its flux. The method is also extended to the case of matrix coefficient. The linear system arising from the discretization is solved by an efficient multigrid approach. Unlike the 1D case, grid points are not necessarily aligned with the normal derivative and therefore suitable stencils must be chosen to discretize interface conditions in order to achieve second order accuracy in the solution and its gradient. A proper treatment of the interface conditions will allow the multigrid to attain the optimal convergence factor, comparable with the one obtained by Local Fourier Analysis for rectangular domains. The method is robust enough to handle large jump in the coefficients: order of accuracy, monotonicity of the errors and good convergence factor are maintained by the scheme.

Development, validity and reliability of the short multidimensional positive mental health instrument.

PubMed

Vaingankar, Janhavi Ajit; Subramaniam, Mythily; Abdin, Edimansyah; Picco, Louisa; Chua, Boon Yiang; Eng, Goi Khia; Sambasivam, Rajeswari; Shafie, Saleha; Zhang, Yunjue; Chong, Siow Ann

2014-06-01

The 47-item positive mental health (PMH) instrument measures the level of PMH in multiethnic adult Asian populations. This study aimed to (1) develop a short PMH instrument and (2) establish its validity and reliability among the adult Singapore population. Two separate studies were conducted among adult community-dwelling Singapore residents of Chinese, Malay or Indian ethnicity where participants completed self-administered questionnaires. In the first study, secondary data analysis was conducted using confirmatory factor analysis (CFA) to shorten the PMH instrument. In the second study, the newly developed short PMH instrument and other scales were administered to 201 residents to establish its factor structure, validity and reliability. A 20-item short PMH instrument fulfilling a higher-order six-factor structure was developed following secondary analysis. The mean age of the participants in the second study was 41 years and about 53% were women. One item with poor factor loading was further removed to generate a 19-item version of the PMH instrument. CFA demonstrated a first-order six-factor model of the short PMH instrument. The PMH-19 instrument and its subscales fulfilled criterion validity hypotheses. Internal consistency and test-retest reliability of the PMH-19 instrument were high (Cronbach's α coefficient = 0.87; intraclass correlation coefficient = 0.93, respectively). The 19-item PMH instrument is multidimensional, valid and reliable, and most importantly, with its reduced administration time, the short PMH instrument can be used to measure and evaluate PMH in Asian communities.

The measurement of "eating-disorder-thoughts" and "eating-disorder-behaviors": Implications for assessment and detection of eating disorders in epidemiological studies.

PubMed

Miller, Jessie L; Vaillancourt, Tracy; Hanna, Steven E

2009-04-01

To test a theoretically driven second-order factor model of eating disorders, with eating-disordered thoughts and eating-disordered behaviors representing the higher order factors, we conducted a confirmatory factor analysis using a female university student sample (N=1816). The 'Thought' latent construct was comprised of indicators representing fear of fat and dissatisfaction with body shape/weight and the latent construct 'Behavior' was comprised of indicators representing binging, purging and restricting. From the thought and behavior latent factors, composite groups were created by varying the level of thoughts and behaviors (high, moderate, and few/or none). We examined the independent contributions of thoughts and behaviors on a measure of psychopathology (depression). A second-order model of "eating disorder thoughts" and "eating disorder behaviors" was supported by the data, based on model fit, factor loadings, and model parsimony. Mean scores on depression were clinically significant for groups engaged in any level of eating disorder behavior whereas thoughts contributed to risk for depression only at the extreme end. Because of the disproportionate representation of eating disorder thoughts (high) and eating disorder behaviors (low) in non-clinical populations, the measurement and detection of eating disorders may be enhanced by measuring thoughts separate from behaviors.

A Confirmatory Factor Analysis of the Structure of Statistics Anxiety Measure: An examination of four alternative models

PubMed Central

Vahedi, Shahram; Farrokhi, Farahman

2011-01-01

Objective The aim of this study is to explore the confirmatory factor analysis results of the Persian adaptation of Statistics Anxiety Measure (SAM), proposed by Earp. Method The validity and reliability assessments of the scale were performed on 298 college students chosen randomly from Tabriz University in Iran. Confirmatory factor analysis (CFA) was carried out to determine the factor structures of the Persian adaptation of SAM. Results As expected, the second order model provided a better fit to the data than the three alternative models. Conclusions Hence, SAM provides an equally valid measure for use among college students. The study both expands and adds support to the existing body of math anxiety literature. PMID:22952530

Dimensions of vegetable parenting practices among preschoolers.

PubMed

Baranowski, Tom; Chen, Tzu-An; O'Connor, Teresia; Hughes, Sheryl; Beltran, Alicia; Frankel, Leslie; Diep, Cassandra; Baranowski, Janice C

2013-10-01

The objective of this study was to determine the factor structure of 31 effective and ineffective vegetable parenting practices used by parents of preschool children based on three theoretically proposed factors: responsiveness, control and structure. The methods employed included both corrected item-total correlations and confirmatory factor analysis. Acceptable fit was obtained only when effective and ineffective parenting practices were analyzed separately. Among effective items the model included one second order factor (effectiveness) and the three proposed first order factors. The same structure was revealed among ineffective items, but required correlated paths be specified among items. A theoretically specified three factor structure was obtained among 31 vegetable parenting practice items, but likely to be effective and ineffective items had to be analyzed separately. Research is needed on how these parenting practices factors predict child vegetable intake. Copyright © 2013 Elsevier Ltd. All rights reserved.

Psychometric evaluation of the Chinese version of the Patient Perceptions of Empowerment Scale (PPES).

PubMed

Yeh, Mei-Yu; Lin, Sieh-Hwa; Tung, Tao-Hsin

2014-01-01

To evaluate the psychometric properties of the Chinese version of the Patient Perceptions of Empowerment Scale (PPES) and to perform a cross-cultural validity assessment. In this cross-sectional survey, 554 inpatients in three general hospitals in northern Taiwan were recruited. Principal component analysis was used to examine the factor structure of the scale. Confirmatory factor analyses were conducted on the measurement model of the Chinese version of the PPES. Confirmatory factor analyses supported the presence of a second-order four-factor model (information, decision, individual, and self-management) of the Chinese version of the PPES when used with a Taiwanese inpatient population. The results indicate that the 11-item, second-order, four-factor Chinese version of the PPES provided best goodness-of-fit for the data in this study. The 11-item four-factor Chinese version of the PPES is a self-completion scale. This study demonstrated that the Chinese version of the PPES is a reliable and valid self-report instrument for the assessment of patient perceptions of empowerment in clinical practice. Further adaptation and evaluation of the scale will hopefully stimulate further studies on PPES in the fields of psychometrics in Taiwan.

Psychometric Evaluation of the Chinese Version of the Patient Perceptions of Empowerment Scale (PPES)

PubMed Central

Lin, Sieh-Hwa

2014-01-01

Objectives. To evaluate the psychometric properties of the Chinese version of the Patient Perceptions of Empowerment Scale (PPES) and to perform a cross-cultural validity assessment. Methods. In this cross-sectional survey, 554 inpatients in three general hospitals in northern Taiwan were recruited. Principal component analysis was used to examine the factor structure of the scale. Confirmatory factor analyses were conducted on the measurement model of the Chinese version of the PPES. Results. Confirmatory factor analyses supported the presence of a second-order four-factor model (information, decision, individual, and self-management) of the Chinese version of the PPES when used with a Taiwanese inpatient population. The results indicate that the 11-item, second-order, four-factor Chinese version of the PPES provided best goodness-of-fit for the data in this study. Conclusion. The 11-item four-factor Chinese version of the PPES is a self-completion scale. This study demonstrated that the Chinese version of the PPES is a reliable and valid self-report instrument for the assessment of patient perceptions of empowerment in clinical practice. Further adaptation and evaluation of the scale will hopefully stimulate further studies on PPES in the fields of psychometrics in Taiwan. PMID:24971354

The Work Role Functioning Questionnaire v2.0 Showed Consistent Factor Structure Across Six Working Samples.

PubMed

Abma, Femke I; Bültmann, Ute; Amick Iii, Benjamin C; Arends, Iris; Dorland, Heleen F; Flach, Peter A; van der Klink, Jac J L; van de Ven, Hardy A; Bjørner, Jakob Bue

2017-09-09

Objective The Work Role Functioning Questionnaire v2.0 (WRFQ) is an outcome measure linking a persons' health to the ability to meet work demands in the twenty-first century. We aimed to examine the construct validity of the WRFQ in a heterogeneous set of working samples in the Netherlands with mixed clinical conditions and job types to evaluate the comparability of the scale structure. Methods Confirmatory factor and multi-group analyses were conducted in six cross-sectional working samples (total N = 2433) to evaluate and compare a five-factor model structure of the WRFQ (work scheduling demands, output demands, physical demands, mental and social demands, and flexibility demands). Model fit indices were calculated based on RMSEA ≤ 0.08 and CFI ≥ 0.95. After fitting the five-factor model, the multidimensional structure of the instrument was evaluated across samples using a second order factor model. Results The factor structure was robust across samples and a multi-group model had adequate fit (RMSEA = 0.63, CFI = 0.972). In sample specific analyses, minor modifications were necessary in three samples (final RMSEA 0.055-0.080, final CFI between 0.955 and 0.989). Applying the previous first order specifications, a second order factor model had adequate fit in all samples. Conclusion A five-factor model of the WRFQ showed consistent structural validity across samples. A second order factor model showed adequate fit, but the second order factor loadings varied across samples. Therefore subscale scores are recommended to compare across different clinical and working samples.

Exploring the Different Trajectories of Analytical Thinking Ability Factors: An Application of the Second-Order Growth Curve Factor Model

ERIC Educational Resources Information Center

Saengprom, Narumon; Erawan, Waraporn; Damrongpanit, Suntonrapot; Sakulku, Jaruwan

2015-01-01

The purposes of this study were 1) Compare analytical thinking ability by testing the same sets of students 5 times 2) Develop and verify whether analytical thinking ability of students corresponds to second-order growth curve factors model. Samples were 1,093 eighth-grade students. The results revealed that 1) Analytical thinking ability scores…

The Impact of a Learning Organization on Performance: Focusing on Knowledge Performance and Financial Performance

ERIC Educational Resources Information Center

Kim, Kyoungshin; Watkins, Karen E.; Lu, Zhenqiu

2017-01-01

Purpose: The purpose of this study is to examine the relationships among a learning organization, knowledge and financial performance using the Dimensions of the Learning Organization Questionnaire and its abbreviated version. Design/methodology/approach: This study used a secondary data set and performed second-order factor analysis and…

A comparison of second order derivative based models for time domain reflectometry wave form analysis

USDA-ARS?s Scientific Manuscript database

Adaptive waveform interpretation with Gaussian filtering (AWIGF) and second order bounded mean oscillation operator Z square 2(u,t,r) are TDR analysis methods based on second order differentiation. AWIGF was originally designed for relatively long probe (greater than 150 mm) TDR waveforms, while Z s...

Psychometric properties of the Intrinsic Motivation Inventory in a competitive sport setting: a confirmatory factor analysis.

PubMed

McAuley, E; Duncan, T; Tammen, V V

1989-03-01

The present study was designed to assess selected psychometric properties of the Intrinsic Motivation Inventory (IMI) (Ryan, 1982), a multidimensional measure of subjects' experience with regard to experimental tasks. Subjects (N = 116) competed in a basketball free-throw shooting game, following which they completed the IMI. The LISREL VI computer program was employed to conduct a confirmatory factor analysis to assess the tenability of a five factor hierarchical model representing four first-order factors or dimensions and a second-order general factor representing intrinsic motivation. Indices of model acceptability tentatively suggest that the sport data adequately fit the hypothesized five factor hierarchical model. Alternative models were tested but did not result in significant improvements in the goodness-of-fit indices, suggesting the proposed model to be the most accurate of the models tested. Coefficient alphas for the four dimensions and the overall scale indicated adequate reliability. The results are discussed with regard to the importance of accurate assessment of psychological constructs and the use of linear structural equations in confirming the factor structures of measures.

Effects of infants' birth order, maternal age, and socio-economic status on birth weight.

PubMed

Ghaemmaghami, Seyed J; Nikniaz, Leila; Mahdavi, Reza; Nikniaz, Zeinab; Razmifard, Farzad; Afsharnia, Farzaneh

2013-09-01

To determine the effects of infants' birth order, maternal age, and socioeconomic status (SES) on birth weight. This cross-sectional study included a sample of 858 mothers recruited over a 6-month period in 2010, in a defined population of 9 urban health centers, and who were admitted for their infants' first vaccination. Maternal clinical data, demographic data, and infants' birth weight were obtained from the interview and maternal hospital files. Multiple regression and analysis of variance were used for data analysis. First and fourth births had lower birth weights compared with second and third births in all maternal ages in controlling parity, birth weight increases with maternal age up to the early 24, and then tends to level off. Male gender, maternal age 20-24 years, second and third births had a significant positive effect on birth weight. Lower family economic status and higher educational attainment were significantly associated with lower birth weight. For women in the 15-19 and 40-44 years age groups, the second birth order was associated with the most undesirable effect on birth weight. Accessibility of health care services, parity, maternal age, and socioeconomic factors are strongly associated with infants' birth weight.

Cross-Cultural Evaluation of Antonovsky's Orientation to Life Questionnaire: Comparison Between Australian, Finnish, and Turkish Young Adults.

PubMed

Lajunen, Timo

2018-01-01

Antonovsky's concept "sense of coherence" (SOC) and the related measurement instrument "The Orientation to Life Questionnaire" (OLQ) has been widely applied in studies on health and well-being. The purpose of the present study is to investigate the cultural differences in factor structures and psychometric properties as well as mean scores of the 13-item form of Antonovsky's OLQ among Australian (n = 201), Finnish (n = 203), and Turkish (n = 152) students. Three models of factor structure were studied by using confirmatory factor analysis: single-factor model, first-order correlated-three-factor model, and the second-order three-factor model. Results obtained in all three countries suggest that the first- and second-order three-factor models fitted the data better that the single-factor model. Hence, the OLQ scoring based on comprehensibility, manageability, and meaningfulness scales was supported. Scale reliabilities and inter-correlations were in line with those reported in earlier studies. Two-way analyses of variance (gender × nationality) with age as a covariate showed no cultural differences in SOC scale scores. Women got higher scores on the meaningfulness scale than men, and age was positively related to all SOC scale scores indicating that SOC increases in early adulthood. The results support the three-factor model of OLQ which thus should be used in Australia, Finland, and Turkey instead of a single-factor model. Need for cross-cultural studies taking into account cultural correlates of SOC and its relation to health and well-being indicators as well as studies on gender differences in the OLQ are emphasized.

Stability phase diagram of a perpendicular magnetic tunnel junction in noncollinear geometry

NASA Astrophysics Data System (ADS)

Strelkov, N.; Timopheev, A.; Sousa, R. C.; Chshiev, M.; Buda-Prejbeanu, L. D.; Dieny, B.

2017-05-01

Experimental measurements performed on MgO-based perpendicular magnetic tunnel junctions show a strong dependence of the stability voltage-field diagrams as a function of the direction of the magnetic field with respect to the plane of the sample. When the magnetic field is applied in-plane, systematic nonlinear phase boundaries are observed for various lateral sizes. The simulation results based on the phenomenological Landau-Lifshitz-Gilbert equation including the in-plane and out-of-plane spin transfer torques are consistent with the measurements if a second-order anisotropy contribution is considered. Furthermore, performing the stability analysis in linear approximation allowed us to analytically extract the critical switching voltage at zero temperature in the presence of an in-plane field. This study indicates that in the noncollinear geometry investigations are suitable to detect the presence of the second-order term in the anisotropy. Such higher order anisotropy term can yield an easy-cone anisotropy which reduces the thermal stability factor but allows for more reproducible spin transfer torque switching due to a reduced stochasticity of the switching. As a result, the energy per write event decreases much faster than the thermal stability factor as the second-order anisotropy becomes more negative. Easy-cone anisotropy can be useful for fast-switching spin transfer torque magnetic random access memories provided the thermal stability can be maintained above the required value for a given memory specification.

Probabilistic biosphere modeling for the long-term safety assessment of geological disposal facilities for radioactive waste using first- and second-order Monte Carlo simulation.

PubMed

Ciecior, Willy; Röhlig, Klaus-Jürgen; Kirchner, Gerald

2018-10-01

In the present paper, deterministic as well as first- and second-order probabilistic biosphere modeling approaches are compared. Furthermore, the sensitivity of the influence of the probability distribution function shape (empirical distribution functions and fitted lognormal probability functions) representing the aleatory uncertainty (also called variability) of a radioecological model parameter as well as the role of interacting parameters are studied. Differences in the shape of the output distributions for the biosphere dose conversion factor from first-order Monte Carlo uncertainty analysis using empirical and fitted lognormal distribution functions for input parameters suggest that a lognormal approximation is possibly not always an adequate representation of the aleatory uncertainty of a radioecological parameter. Concerning the comparison of the impact of aleatory and epistemic parameter uncertainty on the biosphere dose conversion factor, the latter here is described using uncertain moments (mean, variance) while the distribution itself represents the aleatory uncertainty of the parameter. From the results obtained, the solution space of second-order Monte Carlo simulation is much larger than that from first-order Monte Carlo simulation. Therefore, the influence of epistemic uncertainty of a radioecological parameter on the output result is much larger than that one caused by its aleatory uncertainty. Parameter interactions are only of significant influence in the upper percentiles of the distribution of results as well as only in the region of the upper percentiles of the model parameters. Copyright © 2018 Elsevier Ltd. All rights reserved.

Phenotypic and genetic structure of traits delineating personality disorder.

PubMed

Livesley, W J; Jang, K L; Vernon, P A

1998-10-01

The evidence suggests that personality traits are hierarchically organized with more specific or lower-order traits combining to form more generalized higher-order traits. Agreement exists across studies regarding the lower-order traits that delineate personality disorder but not the higher-order traits. This study seeks to identify the higher-order structure of personality disorder by examining the phenotypic and genetic structures underlying lower-order traits. Eighteen lower-order traits were assessed using the Dimensional Assessment of Personality Disorder-Basic Questionnaire in samples of 656 personality disordered patients, 939 general population subjects, and a volunteer sample of 686 twin pairs. Principal components analysis yielded 4 components, labeled Emotional Dysregulation, Dissocial Behavior, Inhibitedness, and Compulsivity, that were similar across the 3 samples. Multivariate genetic analyses also yielded 4 genetic and environmental factors that were remarkably similar to the phenotypic factors. Analysis of the residual heritability of the lower-order traits when the effects of the higher-order factors were removed revealed a substantial residual heritable component for 12 of the 18 traits. The results support the following conclusions. First, the stable structure of traits across clinical and nonclinical samples is consistent with dimensional representations of personality disorders. Second, the higher-order traits of personality disorder strongly resemble dimensions of normal personality. This implies that a dimensional classification should be compatible with normative personality. Third, the residual heritability of the lower-order traits suggests that the personality phenotypes are based on a large number of specific genetic components.

Evidence of Second-Order Factor Structure in a Diagnostic Problem Space: Implications for Medical Education.

ERIC Educational Resources Information Center

Papa, Frank J.; And Others

1997-01-01

Chest pain was identified as a specific medical problem space, and disease classes were modeled to define it. Results from a test taken by 628 medical residents indicate a second-order factor structure that suggests that chest pain is a multidimensional problem space. Implications for medical education are discussed. (SLD)

The Spanish version of the Emotional Labour Scale (ELS): a validation study.

PubMed

Picardo, Juan M; López-Fernández, Consuelo; Hervás, María José Abellán

2013-10-01

To validate the Spanish version of the Emotional Labour Scale (ELS), an instrument widely used to understand how professionals working with people face emotional labor in their daily job. An observational, cross-sectional and multicenter survey was used. Nursing students and their clinical tutors (n=211) completed the self-reported ELS when the clinical practice period was over. First order and second order Confirmatory Factor Analyses (CFA) were estimated in order to test the factor structure of the scale. The results of the CFA confirm a factor structure of the scale with six first order factors (duration, frequency, intensity, variety, surface acting and deep acting) and two larger second order factors named Demands (duration, frequency, intensity and variety) and Acting (surface acting and deep acting) establishing the validity of the Spanish version of the ELS. Copyright © 2012 Elsevier Ltd. All rights reserved.

Structural validation of the Self-Compassion Scale with a German general population sample

PubMed Central

Kwakkenbos, Linda; Moran, Chelsea; Thombs, Brett; Albani, Cornelia; Bourkas, Sophia; Zenger, Markus; Brahler, Elmar; Körner, Annett

2018-01-01

Background Published validation studies have reported different factor structures for the Self-Compassion Scale (SCS). The objective of this study was to assess the factor structure of the SCS in a large general population sample representative of the German population. Methods A German population sample completed the SCS and other self-report measures. Confirmatory factor analysis (CFA) in MPlus was used to test six models previously found in factor analytic studies (unifactorial model, two-factor model, three-factor model, six-factor model, a hierarchical (second order) model with six first-order factors and two second-order factors, and a model with arbitrarily assigned items to six factors). In addition, three bifactor models were also tested: bifactor model #1 with two group factors (SCS positive items, called SCS positive) and SCS negative items, called SCS negative) and one general factor (overall SCS); bifactor model #2, which is a two-tier model with six group factors, three (SCS positive subscales) corresponding to one general dimension (SCS positive) and three (SCS negative subscales) corresponding to the second general dimension (SCS negative); bifactor model #3 with six group factors (six SCS subscales) and one general factor (overall SCS). Results The two-factor model, the six-factor model, and the hierarchical model showed less than ideal, but acceptable fit. The model fit indices for these models were comparable, with no apparent advantage of the six-factor model over the two-factor model. The one-factor model, the three-factor model, and bifactor model #3 showed poor fit. The other two bifactor models showed strong support for two factors: SCS positive and SCS negative. Conclusion The main results of this study are that, among the German general population, six SCS factors and two SCS factors fit the data reasonably well. While six factors can be modelled, the three negative factors and the three positive factors, respectively, did not reflect reliable or meaningful variance beyond the two summative positive and negative item factors. As such, we recommend the use of two subscale scores to capture a positive factor and a negative factor when administering the German SCS to general population samples and we strongly advise against the use of a total score across all SCS items. PMID:29408888

General relaxation schemes in multigrid algorithms for higher order singularity methods

NASA Technical Reports Server (NTRS)

Oskam, B.; Fray, J. M. J.

1981-01-01

Relaxation schemes based on approximate and incomplete factorization technique (AF) are described. The AF schemes allow construction of a fast multigrid method for solving integral equations of the second and first kind. The smoothing factors for integral equations of the first kind, and comparison with similar results from the second kind of equations are a novel item. Application of the MD algorithm shows convergence to the level of truncation error of a second order accurate panel method.

Saturation behavior: a general relationship described by a simple second-order differential equation.

PubMed

Kepner, Gordon R

2010-04-13

The numerous natural phenomena that exhibit saturation behavior, e.g., ligand binding and enzyme kinetics, have been approached, to date, via empirical and particular analyses. This paper presents a mechanism-free, and assumption-free, second-order differential equation, designed only to describe a typical relationship between the variables governing these phenomena. It develops a mathematical model for this relation, based solely on the analysis of the typical experimental data plot and its saturation characteristics. Its utility complements the traditional empirical approaches. For the general saturation curve, described in terms of its independent (x) and dependent (y) variables, a second-order differential equation is obtained that applies to any saturation phenomena. It shows that the driving factor for the basic saturation behavior is the probability of the interactive site being free, which is described quantitatively. Solving the equation relates the variables in terms of the two empirical constants common to all these phenomena, the initial slope of the data plot and the limiting value at saturation. A first-order differential equation for the slope emerged that led to the concept of the effective binding rate at the active site and its dependence on the calculable probability the interactive site is free. These results are illustrated using specific cases, including ligand binding and enzyme kinetics. This leads to a revised understanding of how to interpret the empirical constants, in terms of the variables pertinent to the phenomenon under study. The second-order differential equation revealed the basic underlying relations that describe these saturation phenomena, and the basic mathematical properties of the standard experimental data plot. It was shown how to integrate this differential equation, and define the common basic properties of these phenomena. The results regarding the importance of the slope and the new perspectives on the empirical constants governing the behavior of these phenomena led to an alternative perspective on saturation behavior kinetics. Their essential commonality was revealed by this analysis, based on the second-order differential equation.

Development and validity of the Emotion and Motivation Self-regulation Questionnaire (EMSR-Q).

PubMed

Alonso-Tapia, Jesús; Panadero Calderón, Ernesto; Díaz Ruiz, Miguel A

2014-07-15

This study has two objectives, first, to develop and validate the "Emotion and Motivation Self-regulation Questionnaire" (EMSR-Q), and second, to analyze (in the context of the questionnaire validation process) the relationships between self-regulation styles (SRS) rooted in goal orientations, and classroom motivational climate (CMC). A total of 664 Secondary Education students from Madrid (Spain) formed the sample of the study. It was divided randomly in two groups to perform confirmatory factor analysis and to cross-validate the results. Both analyses supported a five first-order factor structure, organized around two second-order factors, "Learning self-regulation style" (LSR) and "Avoidance self-regulation style" (ASR): (χ 2 /df = 2.71; GFI = .89; IFI = .84; CFI = .84; RMSEA = .07). Hypotheses concerning the relationships between SRS, goal orientations and expectancies are supported by additional correlation and factor analyses. Moreover, several regression analyses supported for the most part of the remaining hypotheses concerning the role of self-regulation styles as predictors of classroom motivational climate (CMC) perception, of change in self-regulation attributed to teacher work, and of students' satisfaction with this same work. Theoretical and practical implications are discussed.

Real-time fringe pattern demodulation with a second-order digital phase-locked loop.

PubMed

Gdeisat, M A; Burton, D R; Lalor, M J

2000-10-10

The use of a second-order digital phase-locked loop (DPLL) to demodulate fringe patterns is presented. The second-order DPLL has better tracking ability and more noise immunity than the first-order loop. Consequently, the second-order DPLL is capable of demodulating a wider range of fringe patterns than the first-order DPLL. A basic analysis of the first- and the second-order loops is given, and a performance comparison between the first- and the second-order DPLL's in analyzing fringe patterns is presented. The implementation of the second-order loop in real time on a commercial parallel image processing system is described. Fringe patterns are grabbed and processed, and the resultant phase maps are displayed concurrently.

A COMBINED FACTOR ANALYSIS OF CREATIVITY AND INTELLIGENCE.

PubMed

Cave, R L

1970-04-01

A battery of tests was given to 447 studenits in the secondary schools of Alcoa, Tennessee. The tests were composed of the Lorge-Thorndike Intelligence Tests, and five selected creativity tests. The combined battery of tests was factor analyzed and rotated to an oblique simple structure, and then to a hierachical solution. Three factors were found: the verbal intelligence and reasoning factors identified in many previous studies, and a creativity faotor. The structure was very oblique. The second order factor, g, was found to count for 77% of the variance of the verbal facbor, 89% of the reasoning factor and 48% of the creativity factor. These results were compared with those of previous studies of creativity and intelligence.

Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure.

PubMed

Hall, William J

2016-11-01

This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability testing, and confirmatory factor analysis. A sample of 275 middle school students was used to examine the psychometric properties and factor structure of the BullyHARM, which consists of 22 items and 6 subscales: physical bullying, verbal bullying, social/relational bullying, cyber-bullying, property bullying, and sexual bullying. First-order and second-order factor models were evaluated. Results demonstrate that the first-order factor model had superior fit. Results of reliability testing indicate that the BullyHARM scale and subscales have very good internal consistency reliability. Findings indicate that the BullyHARM has good properties regarding content validation and respondent-related validation and is a promising instrument for measuring bullying victimization in school.

Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure

PubMed Central

Hall, William J.

2017-01-01

This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability testing, and confirmatory factor analysis. A sample of 275 middle school students was used to examine the psychometric properties and factor structure of the BullyHARM, which consists of 22 items and 6 subscales: physical bullying, verbal bullying, social/relational bullying, cyber-bullying, property bullying, and sexual bullying. First-order and second-order factor models were evaluated. Results demonstrate that the first-order factor model had superior fit. Results of reliability testing indicate that the BullyHARM scale and subscales have very good internal consistency reliability. Findings indicate that the BullyHARM has good properties regarding content validation and respondent-related validation and is a promising instrument for measuring bullying victimization in school. PMID:28194041

Sample size adjustments for varying cluster sizes in cluster randomized trials with binary outcomes analyzed with second-order PQL mixed logistic regression.

PubMed

Candel, Math J J M; Van Breukelen, Gerard J P

2010-06-30

Adjustments of sample size formulas are given for varying cluster sizes in cluster randomized trials with a binary outcome when testing the treatment effect with mixed effects logistic regression using second-order penalized quasi-likelihood estimation (PQL). Starting from first-order marginal quasi-likelihood (MQL) estimation of the treatment effect, the asymptotic relative efficiency of unequal versus equal cluster sizes is derived. A Monte Carlo simulation study shows this asymptotic relative efficiency to be rather accurate for realistic sample sizes, when employing second-order PQL. An approximate, simpler formula is presented to estimate the efficiency loss due to varying cluster sizes when planning a trial. In many cases sampling 14 per cent more clusters is sufficient to repair the efficiency loss due to varying cluster sizes. Since current closed-form formulas for sample size calculation are based on first-order MQL, planning a trial also requires a conversion factor to obtain the variance of the second-order PQL estimator. In a second Monte Carlo study, this conversion factor turned out to be 1.25 at most. (c) 2010 John Wiley & Sons, Ltd.

Psychometric properties of the Florence CyberBullying-CyberVictimization Scales.

PubMed

Palladino, Benedetta Emanuela; Nocentini, Annalaura; Menesini, Ersilia

2015-02-01

The present study tried to answer the research need for empirically validated and theoretically based instruments to assess cyberbullying and cybervictimization. The psychometric properties of the Florence CyberBullying-CyberVictimization Scales (FCBVSs) were analyzed in a sample of 1,142 adolescents (Mage=15.18 years; SD=1.12 years; 54.5% male). For both cybervictimization and cyberbullying, results support a gender invariant model involving 14 items and four factors covering four types of behaviors (written-verbal, visual, impersonation, and exclusion). The second-order confirmatory factor analysis confirmed that a "global," second-order measure of cyberbullying and cybervictimization fits the data well. Overall, the scales showed good validity (construct, concurrent, and convergent) and reliability (internal consistency and test-retest). In addition, using the global key question measure as a criterion, ROC analyses, determining the ability of a test to discriminate between groups, allowed us to identify cutoff points to classify respondents as involved/not involved starting from the continuum measure derived from the scales.

An Analysis of Second-Order Autoshaping

ERIC Educational Resources Information Center

Ward-Robinson, Jasper

2004-01-01

Three mechanisms can explain second-order conditioning: (1) The second-order conditioned stimulus (CS2) could activate a representation of the first-order conditioned stimulus (CS1), thereby provoking the conditioned response (CR); The CS2 could enter into an excitatory association with either (2) the representation governing the CR, or (3) with a…

Characterising the latent structure and organisation of self-reported thoughts, feelings and behaviours in adolescents and young adults

PubMed Central

Neufeld, Sharon; Jones, Peter B.; Fonagy, Peter; Bullmore, Edward T.; Dolan, Raymond J.; Moutoussis, Michael; Toseeb, Umar; Goodyer, Ian M.

2017-01-01

Little is known about the underlying relationships between self-reported mental health items measuring both positive and negative emotional and behavioural symptoms at the population level in young people. Improved measurement of the full range of mental well-being and mental illness may aid in understanding the aetiological substrates underlying the development of both mental wellness as well as specific psychiatric diagnoses. A general population sample aged 14 to 24 years completed self-report questionnaires on anxiety, depression, psychotic-like symptoms, obsessionality and well-being. Exploratory and confirmatory factor models for categorical data and latent profile analyses were used to evaluate the structure of both mental wellness and illness items. First order, second order and bifactor structures were evaluated on 118 self-reported items obtained from 2228 participants. A bifactor solution was the best fitting latent variable model with one general latent factor termed ‘distress’ and five ‘distress independent’ specific factors defined as self-confidence, antisocial behaviour, worry, aberrant thinking, and mood. Next, six distinct subgroups were derived from a person-centred latent profile analysis of the factor scores. Finally, concurrent validity was assessed using information on hazardous behaviours (alcohol use, substance misuse, self-harm) and treatment for mental ill health: both discriminated between the latent traits and latent profile subgroups. The findings suggest a complex, multidimensional mental health structure in the youth population rather than the previously assumed first or second order factor structure. Additionally, the analysis revealed a low hazardous behaviour/low mental illness risk subgroup not previously described. Population sub-groups show greater validity over single variable factors in revealing mental illness risks. In conclusion, our findings indicate that the structure of self reported mental health is multidimensional in nature and uniquely finds improved prediction to mental illness risk within person-centred subgroups derived from the multidimensional latent traits. PMID:28403164

Characterising the latent structure and organisation of self-reported thoughts, feelings and behaviours in adolescents and young adults.

PubMed

St Clair, Michelle C; Neufeld, Sharon; Jones, Peter B; Fonagy, Peter; Bullmore, Edward T; Dolan, Raymond J; Moutoussis, Michael; Toseeb, Umar; Goodyer, Ian M

2017-01-01

Little is known about the underlying relationships between self-reported mental health items measuring both positive and negative emotional and behavioural symptoms at the population level in young people. Improved measurement of the full range of mental well-being and mental illness may aid in understanding the aetiological substrates underlying the development of both mental wellness as well as specific psychiatric diagnoses. A general population sample aged 14 to 24 years completed self-report questionnaires on anxiety, depression, psychotic-like symptoms, obsessionality and well-being. Exploratory and confirmatory factor models for categorical data and latent profile analyses were used to evaluate the structure of both mental wellness and illness items. First order, second order and bifactor structures were evaluated on 118 self-reported items obtained from 2228 participants. A bifactor solution was the best fitting latent variable model with one general latent factor termed 'distress' and five 'distress independent' specific factors defined as self-confidence, antisocial behaviour, worry, aberrant thinking, and mood. Next, six distinct subgroups were derived from a person-centred latent profile analysis of the factor scores. Finally, concurrent validity was assessed using information on hazardous behaviours (alcohol use, substance misuse, self-harm) and treatment for mental ill health: both discriminated between the latent traits and latent profile subgroups. The findings suggest a complex, multidimensional mental health structure in the youth population rather than the previously assumed first or second order factor structure. Additionally, the analysis revealed a low hazardous behaviour/low mental illness risk subgroup not previously described. Population sub-groups show greater validity over single variable factors in revealing mental illness risks. In conclusion, our findings indicate that the structure of self reported mental health is multidimensional in nature and uniquely finds improved prediction to mental illness risk within person-centred subgroups derived from the multidimensional latent traits.

An Evaluation on Factors Influencing Decision making for Malaysia Disaster Management: The Confirmatory Factor Analysis Approach

NASA Astrophysics Data System (ADS)

Zubir, S. N. A.; Thiruchelvam, S.; Mustapha, K. N. M.; Che Muda, Z.; Ghazali, A.; Hakimie, H.

2017-12-01

For the past few years, natural disaster has been the subject of debate in disaster management especially in flood disaster. Each year, natural disaster results in significant loss of life, destruction of homes and public infrastructure, and economic hardship. Hence, an effective and efficient flood disaster management would assure non-futile efforts for life saving. The aim of this article is to examine the relationship between approach, decision maker, influence factor, result, and ethic to decision making for flood disaster management in Malaysia. The key elements of decision making in the disaster management were studied based on the literature. Questionnaire surveys were administered among lead agencies at East Coast of Malaysia in the state of Kelantan and Pahang. A total of 307 valid responses had been obtained for further analysis. Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA) were carried out to analyse the measurement model involved in the study. The CFA for second-order reflective and first-order reflective measurement model indicates that approach, decision maker, influence factor, result, and ethic have a significant and direct effect on decision making during disaster. The results from this study showed that decision- making during disaster is an important element for disaster management to necessitate a successful collaborative decision making. The measurement model is accepted to proceed with further analysis known as Structural Equation Modeling (SEM) and can be assessed for the future research.

Effects of Second-Order Sum- and Difference-Frequency Wave Forces on the Motion Response of a Tension-Leg Platform Considering the Set-down Motion

NASA Astrophysics Data System (ADS)

Wang, Bin; Tang, Yougang; Li, Yan; Cai, Runbo

2018-04-01

This paper presents a study on the motion response of a tension-leg platform (TLP) under first- and second-order wave forces, including the mean-drift force, difference and sum-frequency forces. The second-order wave force is calculated using the full-field quadratic transfer function (QTF). The coupled effect of the horizontal motions, such as surge, sway and yaw motions, and the set-down motion are taken into consideration by the nonlinear restoring matrix. The time-domain analysis with 50-yr random sea state is performed. A comparison of the results of different case studies is made to assess the influence of second-order wave force on the motions of the platform. The analysis shows that the second-order wave force has a major impact on motions of the TLP. The second-order difference-frequency wave force has an obvious influence on the low-frequency motions of surge and sway, and also will induce a large set-down motion which is an important part of heave motion. Besides, the second-order sum-frequency force will induce a set of high-frequency motions of roll and pitch. However, little influence of second-order wave force is found on the yaw motion.

Content and factor validation of the Sieloff-King-Friend Assessment of Group Empowerment within Educational Organizations.

PubMed

Friend, Mary Louanne; Sieloff, Christina Leibold; Murphy, Shannon; Leeper, James

2016-07-01

Nursing education programs have responsibilities to their stakeholders to prepare graduates who can provide safe, effective patient centered care while leading health care changes. Empowered nurses have been associated with low nurse turnover and higher patient satisfaction; however, less is currently known about group empowerment in nursing education. In order to examine group empowerment in schools of nursing, the Sieloff-King Assessment of Group Empowerment in Organizations (SKAGEO©) was adapted and tested for content validity and confirmatory factor analysis. The adapted instrument, the Sieloff-King-Friend Assessment of Group Empowerment within Educational Organizations (SKFAGEEO) was first reviewed by nurse experts who provided quantitative and qualitative data regarding each item. A total of 320 nurse deans and faculty comprised the final sample for the second order confirmatory 8 factor analysis. Findings revealed factor loadings ranging from .455 to .960.The overall fit of the propose model was Chi Square=1383. 24, df=566, p<.001; GFI=.786, RMSEA=0.69. The study results indicated that the SKFAGEEO has acceptable psychometric properties. Copyright © 2016 Elsevier Ltd. All rights reserved.

Classification of municipal occupations.

PubMed

Ilmarinen, J; Suurnäkki, T; Nygård, C H; Landau, K

1991-01-01

Eighty-eight job titles were analyzed with the "ergonomic job analysis procedure" [Arbeitswissenschaftliche Erhebungsverfahren zur Tätigkeits-analyse abbreviated (AET) in German]. The objective was to classify the wide range of municipal jobs into homogeneous groups according to job demand and to provide better possibilities to study the relationships between work and health among the aging municipal working population. Altogether 216 items were classified. First, a hierarchical cluster analysis was made, and a dendrogram of the analyzed job titles was drawn. Second, a profile analysis was done in which the single items were grouped into 39 sum items, and a graphic profile was drawn. Finally, the stress factors were listed and drawn in ranking order. The cluster analysis formed 13 groups. Groups exposed to the highest stress factor level were kitchen supervisors, dentists, and physicians. More than 10 stress factors (greater than 50% of the maximum) were found in nursing, administration, installation, transport, and technical supervision.

Postponing Second Teen Births in the 1990s: Longitudinal Analyses of National Data.

ERIC Educational Resources Information Center

Manlove, Jennifer; Mariner, Carrie; Romano, Angela

A sample of high school-age mothers was followed from 1988 to 1994 in order to examine factors associated with having a second teen birth or closely spaced second teen birth. Factors associated with postponing a second teen birth included characteristics measured prior to the first birth, at the time of the first birth, and after the first birth.…

Race/Ethnicity and Social Capital among Middle- and Upper-Middle-Class Elementary School Families: A Structural Equation Model

ERIC Educational Resources Information Center

Caldas, Stephen J.; Cornigans, Linda

2015-01-01

This study used structural equation modeling to conduct a first and second order confirmatory factor analysis (CFA) of a scale developed by McDonald and Moberg (2002) to measure three dimensions of social capital among a diverse group of middle- and upper-middle-class elementary school parents in suburban New York. A structural path model was…

The Structure of Self-Serving Cognitive Distortions: A Validation of the "How I Think" Questionnaire in a Sample of Italian Adolescents

ERIC Educational Resources Information Center

Bacchini, Dario; De Angelis, Grazia; Affuso, Gaetana; Brugman, Daniel

2016-01-01

This study aims to investigate the structure of self-serving cognitive distortions (CD), evaluating the psychometric properties of the How I Think Questionnaire in a sample of Italian adolescents. A confirmatory factor analysis supported the distinction between four categories of CD and the use of a single second-order dimension of CD. Reliability…

Predictions of biochar production and torrefaction performance from sugarcane bagasse using interpolation and regression analysis.

PubMed

Chen, Wei-Hsin; Hsu, Hung-Jen; Kumar, Gopalakrishnan; Budzianowski, Wojciech M; Ong, Hwai Chyuan

2017-12-01

This study focuses on the biochar formation and torrefaction performance of sugarcane bagasse, and they are predicted using the bilinear interpolation (BLI), inverse distance weighting (IDW) interpolation, and regression analysis. It is found that the biomass torrefied at 275°C for 60min or at 300°C for 30min or longer is appropriate to produce biochar as alternative fuel to coal with low carbon footprint, but the energy yield from the torrefaction at 300°C is too low. From the biochar yield, enhancement factor of HHV, and energy yield, the results suggest that the three methods are all feasible for predicting the performance, especially for the enhancement factor. The power parameter of unity in the IDW method provides the best predictions and the error is below 5%. The second order in regression analysis gives a more reasonable approach than the first order, and is recommended for the predictions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Confirmatory factorial analysis of the children´s attraction to physical activity scale (capa).

PubMed

Seabra, A C; Maia, J A; Parker, M; Seabra, A; Brustad, R; Fonseca, A M

2015-03-27

Attraction to physical activity (PA) is an important contributor to children´s intrinsic motivation to engage in games, and sports. Previous studies have supported the utility of the children´s attraction to PA scale (CAPA) (Brustad, 1996) but the validity of this measure for use in Portugal has not been established. The purpose of this study was to cross-validate the shorter version of the CAPA scale in the Portuguese cultural context. A sample of 342 children (8--10 years of age) was used. Confirmatory factor analyses using EQS software ( version 6.1) tested t hree competing measurement models: a single--factor model, a five factor model, and a second order factor model. The single--factor model and the second order model showed a poor fit to the data. It was found that a five-factor model similar to the original one revealed good fit to the data (S--B χ 2 (67) =94.27,p=0.02; NNFI=0.93; CFI=0.95; RMSEA=0.04; 90%CI=0.02;0.05). The results indicated that the CAPA scale is valid and appropriate for use in the Portuguese cultural context. The availability of a valid scale to evaluate attraction to PA at schools should provide improved opportunities for better assessment and understanding of children´s involvement in PA.

Pain and the defense response: structural equation modeling reveals a coordinated psychophysiological response to increasing painful stimulation.

PubMed

Donaldson, Gary W; Chapman, C Richard; Nakamura, Yoshi; Bradshaw, David H; Jacobson, Robert C; Chapman, Christopher N

2003-03-01

The defense response theory implies that individuals should respond to increasing levels of painful stimulation with correlated increases in affectively mediated psychophysiological responses. This paper employs structural equation modeling to infer the latent processes responsible for correlated growth in the pain report, evoked potential amplitudes, pupil dilation, and skin conductance of 92 normal volunteers who experienced 144 trials of three levels of increasingly painful electrical stimulation. The analysis assumed a two-level model of latent growth as a function of stimulus level. The first level of analysis formulated a nonlinear growth model for each response measure, and allowed intercorrelations among the parameters of these models across individuals. The second level of analysis posited latent process factors to account for these intercorrelations. The best-fitting parsimonious model suggests that two latent processes account for the correlations. One of these latent factors, the activation threshold, determines the initial threshold response, while the other, the response gradient, indicates the magnitude of the coherent increase in response with stimulus level. Collectively, these two second-order factors define the defense response, a broad construct comprising both subjective pain evaluation and physiological mechanisms.

Influence of second-order bracket-archwire misalignments on loads generated during third-order archwire rotation in orthodontic treatment.

PubMed

Romanyk, Dan L; George, Andrew; Li, Yin; Heo, Giseon; Carey, Jason P; Major, Paul W

2016-05-01

To investigate the influence of a rotational second-order bracket-archwire misalignment on the loads generated during third-order torque procedures. Specifically, torque in the second- and third-order directions was considered. An orthodontic torque simulator (OTS) was used to simulate the third-order torque between Damon Q brackets and 0.019 × 0.025-inch stainless steel archwires. Second-order misalignments were introduced in 0.5° increments from a neutral position, 0.0°, up to 3.0° of misalignment. A sample size of 30 brackets was used for each misalignment. The archwire was then rotated in the OTS from its neutral position up to 30° in 3° increments and then unloaded in the same increments. At each position, all forces and torques were recorded. Repeated-measures analysis of variance was used to determine if the second-order misalignments significantly affected torque values in the second- and third-order directions. From statistical analysis of the experimental data, it was found that the only statistically significant differences in third-order torque between a misaligned state and the neutral position occurred for 2.5° and 3.0° of misalignment, with mean differences of 2.54 Nmm and 2.33 Nmm, respectively. In addition, in pairwise comparisons of second-order torque for each misalignment increment, statistical differences were observed in all comparisons except for 0.0° vs 0.5° and 1.5° vs 2.0°. The introduction of a second-order misalignment during third-order torque simulation resulted in statistically significant differences in both second- and third-order torque response; however, the former is arguably clinically insignificant.

Psychometric properties and confirmatory factor analysis of the CASP-19, a measure of quality of life in early old age: the HAPIEE study

PubMed Central

Kim, Gyu Ri; Netuveli, Gopalakrishnan; Blane, David; Peasey, Anne; Malyutina, Sofia; Simonova, Galina; Kubinova, Ruzena; Pajak, Andrzej; Croezen, Simone; Bobak, Martin; Pikhart, Hynek

2015-01-01

Objectives: The aim was to assess the reliability and validity of the quality of life (QoL) instrument CASP-19, and three shorter versions of CASP-12 in large population sample of older adults from the HAPIEE (Health, Alcohol, and Psychosocial factors In Eastern Europe) study. Methods: From the Czech Republic, Russia, and Poland, 13,210 HAPIEE participants aged 50 or older completed the retirement questionnaire including CASP-19 at baseline. Three shorter 12-item versions were also derived from original 19-item instrument. Psychometric validation used confirmatory factor analysis, Cronbach's alpha, Pearson's correlation, and construct validity. Results: The second-order four-factor model of CASP-19 did not provide a good fit to the data. Two-factor CASP-12v.3 including residual covariances for negative items to account for the method effect of negative items had the best fit to the data in all countries (CFI = 0.98, TLI = 0.97, RMSEA = 0.05, and WRMR = 1.65 in the Czech Republic; 0.96, 0.94, 0.07, and 2.70 in Poland; and 0.93, 0.90, 0.08, and 3.04 in Russia). Goodness-of-fit indices for the two-factor structure were substantially better than second-order models. Conclusions: This large population-based study is the first validation study of CASP scale in Central and Eastern Europe (CEE), which includes a general population sample in Russia, Poland, and the Czech Republic. The results of this study have demonstrated that the CASP-12v.3 is a valid and reliable tool for assessing QoL among adults aged 50 years or older. This version of CASP is recommended for use in future studies investigating QoL in the CEE populations. PMID:25059754

An alternative assessment of second-order closure models in turbulent shear flows

NASA Technical Reports Server (NTRS)

Speziale, Charles G.; Gatski, Thomas B.

1994-01-01

The performance of three recently proposed second-order closure models is tested in benchmark turbulent shear flows. Both homogeneous shear flow and the log-layer of an equilibrium turbulent boundary layer are considered for this purpose. An objective analysis of the results leads to an assessment of these models that stands in contrast to that recently published by other authors. A variety of pitfalls in the formulation and testing of second-order closure models are uncovered by this analysis.

Probability techniques for reliability analysis of composite materials

NASA Technical Reports Server (NTRS)

Wetherhold, Robert C.; Ucci, Anthony M.

1994-01-01

Traditional design approaches for composite materials have employed deterministic criteria for failure analysis. New approaches are required to predict the reliability of composite structures since strengths and stresses may be random variables. This report will examine and compare methods used to evaluate the reliability of composite laminae. The two types of methods that will be evaluated are fast probability integration (FPI) methods and Monte Carlo methods. In these methods, reliability is formulated as the probability that an explicit function of random variables is less than a given constant. Using failure criteria developed for composite materials, a function of design variables can be generated which defines a 'failure surface' in probability space. A number of methods are available to evaluate the integration over the probability space bounded by this surface; this integration delivers the required reliability. The methods which will be evaluated are: the first order, second moment FPI methods; second order, second moment FPI methods; the simple Monte Carlo; and an advanced Monte Carlo technique which utilizes importance sampling. The methods are compared for accuracy, efficiency, and for the conservativism of the reliability estimation. The methodology involved in determining the sensitivity of the reliability estimate to the design variables (strength distributions) and importance factors is also presented.

Becoming a Teacher Educator--The Motivational Factors

ERIC Educational Resources Information Center

Holme, Richard; Robb, Anna; Berry, William

2016-01-01

This study explores the factors that influenced the transition made by three participants from primary class teacher (or first-order practitioner) to Teacher Education (TE) lecturer (or second-order practitioner) in a Scottish Teacher Education Institution. The self-study case study methodology explored the factors that encouraged, and potentially…

Cascaded Amplitude Modulations in Sound Texture Perception

PubMed Central

McWalter, Richard; Dau, Torsten

2017-01-01

Sound textures, such as crackling fire or chirping crickets, represent a broad class of sounds defined by their homogeneous temporal structure. It has been suggested that the perception of texture is mediated by time-averaged summary statistics measured from early auditory representations. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as “beating” in the envelope-frequency domain. We developed an auditory texture model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures—stimuli generated using time-averaged statistics measured from real-world textures. In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model deviants that lacked second-order modulation rate sensitivity. Lastly, the discriminability of textures that included second-order amplitude modulations appeared to be perceived using a time-averaging process. Overall, our results demonstrate that the inclusion of second-order modulation analysis generates improvements in the perceived quality of synthetic textures compared to the first-order modulation analysis considered in previous approaches. PMID:28955191

Cascaded Amplitude Modulations in Sound Texture Perception.

PubMed

McWalter, Richard; Dau, Torsten

2017-01-01

Sound textures, such as crackling fire or chirping crickets, represent a broad class of sounds defined by their homogeneous temporal structure. It has been suggested that the perception of texture is mediated by time-averaged summary statistics measured from early auditory representations. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as "beating" in the envelope-frequency domain. We developed an auditory texture model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures-stimuli generated using time-averaged statistics measured from real-world textures. In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model deviants that lacked second-order modulation rate sensitivity. Lastly, the discriminability of textures that included second-order amplitude modulations appeared to be perceived using a time-averaging process. Overall, our results demonstrate that the inclusion of second-order modulation analysis generates improvements in the perceived quality of synthetic textures compared to the first-order modulation analysis considered in previous approaches.

Organizational citizenship behavior in schools: validation of a questionnaire.

PubMed

Neves, Paula C; Paixão, Rui; Alarcão, Madalena; Gomes, A Duarte

2014-01-01

The present study examines the psychometric properties (including factorial validity) of an organizational citizenship behavior (OCB) scale in a school context. A total of 321 middle and high school teachers from 59 schools in urban and rural areas of central Portugal completed the OCB scale at their schools. The confirmatory factor analysis validated a hierarchical model with four latent factors on the first level (altruism, conscientiousness, civic participation and courtesy) and a second order factor (OCB). The revised model fit with the data, χ 2 /gl = 1.97; CFI = .962; GFI = .952, RMSEA = .05. The proposed scale (comportamentos de cidadania organizacional em escolas- Revista CCOE-R)- is a valid instrument to assess teacher's perceptions of OCB in their schools, allowing investigation at the organizational level of analysis.

Factor Analysis of Traffic Safety in Urban Roads Based on FTA-LEC

NASA Astrophysics Data System (ADS)

Shuicheng, TIAN; Xingbo, YANG; Xiaoqing, SHEN; Detao, ZHANG

2018-05-01

In order to reduce the number and the loss of urban road traffic accidents in our country, improve the safety of road traffic, a statistical analysis of the research report on major road traffic accidents in 2016 was conducted. The risk factors affecting urban road traffic in China were analyzed by using FTA to find the basic hidden events. Secondly, the risk value of the identified hidden danger events were calculated and classified into four levels I, II, III and IV through the LEC evaluation method. Finally, the graded results of risk factors are verified through a case of specific accidents in Beijing. The results show that: the case verified the scientificalness and effectiveness of hazard classification and provided guidance for urban road traffic management.

Gravitational form factors and decoupling in 2D

NASA Astrophysics Data System (ADS)

Ribeiro, Tiago G.; Shapiro, Ilya L.; Zanusso, Omar

2018-07-01

We calculate and analyse non-local gravitational form factors induced by quantum matter fields in curved two-dimensional space. The calculations are performed for scalars, spinors and massive vectors by means of the covariant heat kernel method up to the second order in the curvature and confirmed using Feynman diagrams. The analysis of the ultraviolet (UV) limit reveals a generalized "running" form of the Polyakov action for a nonminimal scalar field and the usual Polyakov action in the conformally invariant cases. In the infrared (IR) we establish the gravitational decoupling theorem, which can be seen directly from the form factors or from the physical beta function for fields of any spin.

Coherence analysis of a class of weighted networks

NASA Astrophysics Data System (ADS)

Dai, Meifeng; He, Jiaojiao; Zong, Yue; Ju, Tingting; Sun, Yu; Su, Weiyi

2018-04-01

This paper investigates consensus dynamics in a dynamical system with additive stochastic disturbances that is characterized as network coherence by using the Laplacian spectrum. We introduce a class of weighted networks based on a complete graph and investigate the first- and second-order network coherence quantifying as the sum and square sum of reciprocals of all nonzero Laplacian eigenvalues. First, the recursive relationship of its eigenvalues at two successive generations of Laplacian matrix is deduced. Then, we compute the sum and square sum of reciprocal of all nonzero Laplacian eigenvalues. The obtained results show that the scalings of first- and second-order coherence with network size obey four and five laws, respectively, along with the range of the weight factor. Finally, it indicates that the scalings of our studied networks are smaller than other studied networks when 1/√{d }

Analysis of first and second order binary quantized digital phase-locked loops for ideal and white Gaussian noise inputs

NASA Technical Reports Server (NTRS)

Blasche, P. R.

1980-01-01

Specific configurations of first and second order all digital phase locked loops are analyzed for both ideal and additive white gaussian noise inputs. In addition, a design for a hardware digital phase locked loop capable of either first or second order operation is presented along with appropriate experimental data obtained from testing of the hardware loop. All parameters chosen for the analysis and the design of the digital phase locked loop are consistent with an application to an Omega navigation receiver although neither the analysis nor the design are limited to this application.

Chromatographic background drift correction coupled with parallel factor analysis to resolve coelution problems in three-dimensional chromatographic data: quantification of eleven antibiotics in tap water samples by high-performance liquid chromatography coupled with a diode array detector.

PubMed

Yu, Yong-Jie; Wu, Hai-Long; Fu, Hai-Yan; Zhao, Juan; Li, Yuan-Na; Li, Shu-Fang; Kang, Chao; Yu, Ru-Qin

2013-08-09

Chromatographic background drift correction has been an important field of research in chromatographic analysis. In the present work, orthogonal spectral space projection for background drift correction of three-dimensional chromatographic data was described in detail and combined with parallel factor analysis (PARAFAC) to resolve overlapped chromatographic peaks and obtain the second-order advantage. This strategy was verified by simulated chromatographic data and afforded significant improvement in quantitative results. Finally, this strategy was successfully utilized to quantify eleven antibiotics in tap water samples. Compared with the traditional methodology of introducing excessive factors for the PARAFAC model to eliminate the effect of background drift, clear improvement in the quantitative performance of PARAFAC was observed after background drift correction by orthogonal spectral space projection. Copyright © 2013 Elsevier B.V. All rights reserved.

Pseudo-second order models for the adsorption of safranin onto activated carbon: comparison of linear and non-linear regression methods.

PubMed

Kumar, K Vasanth

2007-04-02

Kinetic experiments were carried out for the sorption of safranin onto activated carbon particles. The kinetic data were fitted to pseudo-second order model of Ho, Sobkowsk and Czerwinski, Blanchard et al. and Ritchie by linear and non-linear regression methods. Non-linear method was found to be a better way of obtaining the parameters involved in the second order rate kinetic expressions. Both linear and non-linear regression showed that the Sobkowsk and Czerwinski and Ritchie's pseudo-second order models were the same. Non-linear regression analysis showed that both Blanchard et al. and Ho have similar ideas on the pseudo-second order model but with different assumptions. The best fit of experimental data in Ho's pseudo-second order expression by linear and non-linear regression method showed that Ho pseudo-second order model was a better kinetic expression when compared to other pseudo-second order kinetic expressions.

FACTORS IN PREDICTING ARMY AVIATOR PERFORMANCE: BIRTH ORDER AND PARTICIPATION IN DANGEROUS SPORTS AND ACTIVITIES,

DTIC Science & Technology

Activities Inventory of 395 aviation warrant officer trainees, to test for birth - order effect by comparing first- and second-borns from the same-size...second-born trainees did not differ on measures of exposure to dangerous sports and activities or confidence. Neither pass-fail from flight training nor previous college attendance showed a birth - order effect. (Author)

Heavy quark form factors at two loops

NASA Astrophysics Data System (ADS)

Ablinger, J.; Behring, A.; Blümlein, J.; Falcioni, G.; De Freitas, A.; Marquard, P.; Rana, N.; Schneider, C.

2018-05-01

We compute the two-loop QCD corrections to the heavy quark form factors in the case of the vector, axial-vector, scalar and pseudoscalar currents up to second order in the dimensional parameter ɛ =(4 -D )/2 . These terms are required in the renormalization of the higher-order corrections to these form factors.

Maternal factors contributing to under-five mortality at birth order 1 to 5 in India: a comprehensive multivariate study.

PubMed

Singh, Rajvir; Tripathi, Vrijesh

2013-01-01

The objective of the study is to assess maternal factors contributing to under-five mortality at birth order 1 to 5 in India. Data for this study was derived from the children's record of the 2007 India National Family Health Survey, which is a nationally representative cross-sectional household survey. Data is segregated according to birth order 1 to 5 to assess mother's occupation, Mother's education, child's gender, Mother's age, place of residence, wealth index, mother's anaemia level, prenatal care, assistance at delivery , antenatal care, place of delivery and other maternal factors contributing to under-five mortality. Out of total 51555 births, analysis is restricted to 16567 children of first birth order, 14409 of second birth order, 8318 of third birth order, 5021 of fourth birth order and 3034 of fifth birth order covering 92% of the total births taken place 0-59 months prior to survey. Mother's average age in years for birth orders 1 to 5 are 23.7, 25.8, 27.4, 29 and 31 years, respectively. Most mothers whose children died are Hindu, with no formal education, severely anaemic and working in the agricultural sector. In multivariate logistic models, maternal education, wealth index and breastfeeding are protective factors across all birth orders. In birth order model 1 and 2, mother's occupation is a significant risk factor. In birth order models 2 to 5, previous birth interval of lesser than 24 months is a risk factor. Child's gender is a risk factor in birth order 1 and 5. Information regarding complications in pregnancy and prenatal care act as protective factors in birth order 1, place of delivery and immunization in birth order 2, and child size at birth in birth order 4. Prediction models demonstrate high discrimination that indicates that our models fit the data. The study has policy implications such as enhancing the Information, Education and Communication network for mothers, especially at higher birth orders, in order to reduce under-five mortality. The study emphasises the need of developing interventions to address the issues of anaemia, mothers working in the agricultural sector and improving relevant literacy among mothers.

Examining the Factor Structure and Hierarchical Nature of the Quality of Life Construct

ERIC Educational Resources Information Center

Wang, Mian; Schalock, Robert L.; Verdugo, Miguel A.; Jenaro, Christina

2010-01-01

There is considerable debate in the area of individual quality of life research regarding the factor structure and hierarchical nature of the quality of life construct. Our purpose in this study was to test via structural equation modeling an a priori quality of life model consisting of eight first-order factors and one second-order factor. Data…

Relationship between personality traits and vocational choice.

PubMed

Garcia-Sedeño, Manuel; Navarro, Jose I; Menacho, Inmaculada

2009-10-01

Summary.-The relationship between occupational preferences and personality traits was examined. A randomly chosen sample of 735 students (age range = 17 to 23 years; 50.5% male) in their last year of high school participated in this study. Participants completed Cattell's Sixteen Personality Factor-5 Questionnaire (16PF-5 Questionnaire) and the Kuder-C Professional Tendencies Questionnaire. Initial hierarchical cluster analysis categorized the participants into two groups by Kuder-C vocational factors: one showed a predilection for scientific or technological careers and the other a bias toward the humanities and social sciences. Based on these groupings, differences in 16PF-5 personality traits were analyzed and differences associated with three first-order personality traits (warmth, dominance, and sensitivity), three second-order factors (extraversion, control, and independence), and some areas of professional interest (mechanical, arithmetical artistic, persuasive, and welfare) were identified. The data indicated that there was congruency between personality profiles and vocational interests.

Development of the Executive Personal Finance Scale.

PubMed

Spinella, Marcello; Yang, Bijou; Lester, David

2007-03-01

There is accumulating evidence that prefrontal systems play an important role in management of personal finances, based on studies using clinical populations, functional neuroimaging, and both subjective and objective neuropsychological measures. This study developed the Executive Personal Finance Scale (EPFS) as a specific self-rating measure of executive aspects of personal money management. The resulting 20-item scale had good reliability and showed four factors: impulse control, organization, planning, and motivational drive. Validity was evidenced by correlations with income, credit card debt, and investments. The EPFS also showed logical correlations with compulsive buying and money attitudes. Second-order factor analysis of the EPFS and other scales revealed two higher-order factors of personal finance: cognitive (e.g., planning, organizing) and emotional (e.g., anxiety, impulse-spending, prestige). The EPFS shows good psychometric properties, is easy to use, and will make a convenient complement to other research methodologies exploring the neural basis of personal finance management.

Parametric instability analysis of truncated conical shells using the Haar wavelet method

NASA Astrophysics Data System (ADS)

Dai, Qiyi; Cao, Qingjie

2018-05-01

In this paper, the Haar wavelet method is employed to analyze the parametric instability of truncated conical shells under static and time dependent periodic axial loads. The present work is based on the Love first-approximation theory for classical thin shells. The displacement field is expressed as the Haar wavelet series in the axial direction and trigonometric functions in the circumferential direction. Then the partial differential equations are reduced into a system of coupled Mathieu-type ordinary differential equations describing dynamic instability behavior of the shell. Using Bolotin's method, the first-order and second-order approximations of principal instability regions are determined. The correctness of present method is examined by comparing the results with those in the literature and very good agreement is observed. The difference between the first-order and second-order approximations of principal instability regions for tensile and compressive loads is also investigated. Finally, numerical results are presented to bring out the influences of various parameters like static load factors, boundary conditions and shell geometrical characteristics on the domains of parametric instability of conical shells.

Thinker, Soldier, Scribe: cross-sectional study of researchers' roles and author order in the Annals of Internal Medicine

PubMed Central

Perneger, Thomas V; Poncet, Antoine; Carpentier, Marc; Agoritsas, Thomas; Combescure, Christophe; Gayet-Ageron, Angèle

2017-01-01

Objective How researchers’ contributions relate to author order on the byline remains unclear. We sought to identify researchers’ contributions associated with author order, and to explore the existence of author profiles. Design Observational study. Setting Published record. Participants 1139 authors of 119 research articles published in 2015 in the Annals of Internal Medicine. Primary outcomes Presence or absence of 10 contributions, reported by each author, published in the journal. Results On average, first authors reported 7.1 contributions, second authors 5.2, middle authors 4.0, penultimate authors 4.5 and last authors 6.4 (p<0.001). The first author made the greatest contributions to drafting the article, designing the study, analysing and interpreting the data, and providing study materials or patients. The second author contributed to data analysis as well and to drafting the article. The last author was most involved in obtaining the funding, critically revising the article, designing the study and providing support. Factor analysis yielded three author profiles—Thinker (study design, revision of article, obtaining funding), Soldier (providing material or patients, providing administrative and logistical support, collecting data) and Scribe (analysis and interpretation of data, drafting the article, statistical expertise). These profiles do not strictly correspond to byline position. Conclusions First, second and last authors of research articles made distinct contributions to published research. Three authorship profiles can be used to summarise author contributions. These findings shed light on the organisation of clinical research teams and may help researchers discuss, plan and report authorship in a more transparent way. PMID:28647720

Going beyond audit and feedback: towards behaviour-based interventions to change physician laboratory test ordering behaviour.

PubMed

Meidani, Z; Mousavi, G A; Kheirkhah, D; Benar, N; Maleki, M R; Sharifi, M; Farrokhian, A

2017-12-01

Studies indicate there are a variety of contributing factors affecting physician test ordering behaviour. Identifying these behaviours allows development of behaviour-based interventions. Methods Through a pilot study, the list of contributing factors in laboratory tests ordering, and the most ordered tests, were identified, and given to 50 medical students, interns, residents and paediatricians in questionnaire form. The results showed routine tests and peer or supervisor pressure as the most influential factors affecting physician ordering behaviour. An audit and feedback mechanism was selected as an appropriate intervention to improve physician ordering behaviour. The intervention was carried out at two intervals over a three-month period. Findings There was a large reduction in the number of laboratory tests ordered; from 908 before intervention to 389 and 361 after first and second intervention, respectively. There was a significant relationship between audit and feedback and the meaningful reduction of 7 out of 15 laboratory tests including complete blood count (p = 0.002), erythrocyte sedimentation rate (p = 0.01), C-reactive protein (p = 0.01), venous blood gas (p = 0.016), urine analysis (p = 0.005), blood culture (p = 0.045) and stool examination (p = 0.001). Conclusion The audit and feedback intervention, even in short duration, affects physician ordering behaviour. It should be designed in terms of behaviour-based intervention and diagnosis of the contributing factors in physicians' behaviour. Further studies are required to substantiate the effectiveness of such behaviour-based intervention strategies in changing physician behaviour.

Multivariate curve resolution based chromatographic peak alignment combined with parallel factor analysis to exploit second-order advantage in complex chromatographic measurements.

PubMed

Parastar, Hadi; Akvan, Nadia

2014-03-13

In the present contribution, a new combination of multivariate curve resolution-correlation optimized warping (MCR-COW) with trilinear parallel factor analysis (PARAFAC) is developed to exploit second-order advantage in complex chromatographic measurements. In MCR-COW, the complexity of the chromatographic data is reduced by arranging the data in a column-wise augmented matrix, analyzing using MCR bilinear model and aligning the resolved elution profiles using COW in a component-wise manner. The aligned chromatographic data is then decomposed using trilinear model of PARAFAC in order to exploit pure chromatographic and spectroscopic information. The performance of this strategy is evaluated using simulated and real high-performance liquid chromatography-diode array detection (HPLC-DAD) datasets. The obtained results showed that the MCR-COW can efficiently correct elution time shifts of target compounds that are completely overlapped by coeluted interferences in complex chromatographic data. In addition, the PARAFAC analysis of aligned chromatographic data has the advantage of unique decomposition of overlapped chromatographic peaks to identify and quantify the target compounds in the presence of interferences. Finally, to confirm the reliability of the proposed strategy, the performance of the MCR-COW-PARAFAC is compared with the frequently used methods of PARAFAC, COW-PARAFAC, multivariate curve resolution-alternating least squares (MCR-ALS), and MCR-COW-MCR. In general, in most of the cases the MCR-COW-PARAFAC showed an improvement in terms of lack of fit (LOF), relative error (RE) and spectral correlation coefficients in comparison to the PARAFAC, COW-PARAFAC, MCR-ALS and MCR-COW-MCR results. Copyright © 2014 Elsevier B.V. All rights reserved.

A source flow characteristic technique for the analysis of scramjet exhaust flow field

NASA Technical Reports Server (NTRS)

Delguidice, P.; Dash, S.; Kalben, P.

1974-01-01

The factors which influence the design and selection of a nozzle for a hypersonic scramjet are described. A two dimensional second-order characteristic procedure capable of analyzing the aerodynamic performance of typical nozzle configurations is presented. Equations of motion governing the two dimensional, axisymmetric, or axially expanding inviscid flow of a gas mixture, with frozen chemistry, are provided. Diagrams of the flow conditions for various configurations are included.

[Spanish adaptation of the Stress Manifestations Scale of the Student Stress Inventory (SSI-SM)].

PubMed

Escobar Espejo, Milagros; Blanca, María J; Fernández-Baena, F Javier; Trianes Torres, María Victoria

2011-08-01

The aim of the present study was to translate into Spanish and to describe the psychometric properties of the Stress Manifestations Scale of the Student Stress Inventory (SSI-SM), developed by Fimian, Fastenau, Tashner and Cross to identify the main manifestations of stress in adolescents. The scale was applied to a sample of 1,002 pupils from years one and two of Secondary Education. The paper reports the factor structure, an item analysis, the internal consistency, differences by sex and academic year, external evidence of validity, and norms for scoring the scale. The results reveal a factor structure based on three first-order factors (emotional manifestations, physiological manifestations and behavioural manifestations) and one second-order factor (indicative of stress manifestations). In terms of external validity, there was a positive association with measures of perceived stress, aggressiveness, internalized/externalized symptoms, and a negative association with life satisfaction. The results show that the scale is an adequate tool for evaluating stress manifestations in adolescents.

A new modeling strategy for third-order fast high-performance liquid chromatographic data with fluorescence detection. Quantitation of fluoroquinolones in water samples.

PubMed

Alcaráz, Mirta R; Bortolato, Santiago A; Goicoechea, Héctor C; Olivieri, Alejandro C

2015-03-01

Matrix augmentation is regularly employed in extended multivariate curve resolution-alternating least-squares (MCR-ALS), as applied to analytical calibration based on second- and third-order data. However, this highly useful concept has almost no correspondence in parallel factor analysis (PARAFAC) of third-order data. In the present work, we propose a strategy to process third-order chromatographic data with matrix fluorescence detection, based on an Augmented PARAFAC model. The latter involves decomposition of a three-way data array augmented along the elution time mode with data for the calibration samples and for each of the test samples. A set of excitation-emission fluorescence matrices, measured at different chromatographic elution times for drinking water samples, containing three fluoroquinolones and uncalibrated interferences, were evaluated using this approach. Augmented PARAFAC exploits the second-order advantage, even in the presence of significant changes in chromatographic profiles from run to run. The obtained relative errors of prediction were ca. 10 % for ofloxacin, ciprofloxacin, and danofloxacin, with a significant enhancement in analytical figures of merit in comparison with previous reports. The results are compared with those furnished by MCR-ALS.

Latent dimensions of social anxiety disorder: A re-evaluation of the Social Phobia Inventory (SPIN).

PubMed

Campbell-Sills, Laura; Espejo, Emmanuel; Ayers, Catherine R; Roy-Byrne, Peter; Stein, Murray B

2015-12-01

The Social Phobia Inventory (SPIN; Connor et al., 2000) is a well-validated instrument for assessing severity of social anxiety disorder (SAD). However, evaluations of its factor structure have produced inconsistent results and this aspect of the scale requires further study. Primary care patients with SAD (N=397) completed the SPIN as part of baseline assessment for the Coordinated Anxiety Learning and Management study (Roy-Byrne et al., 2010). These data were used for exploratory and confirmatory factor analysis of the SPIN. A 3-factor model provided the best fit for the data and factors were interpreted as Fear of Negative Evaluation, Fear of Physical Symptoms, and Fear of Uncertainty in Social Situations. Tests of a second-order model showed that the three factors loaded strongly on a single higher-order factor that was labeled Social Anxiety. Findings are consistent with theories identifying Fear of Negative Evaluation as the core feature of SAD, and with evidence that anxiety sensitivity and intolerance of uncertainty further contribute to SAD severity. Copyright © 2015 Elsevier Ltd. All rights reserved.

Realization of the axial next-nearest-neighbor Ising model in U 3 Al 2 Ge 3

DOE PAGES

Fobes, David M.; Lin, Shi-Zeng; Ghimire, Nirmal J.; ...

2017-11-09

Inmore » this paper, we report small-angle neutron scattering (SANS) measurements and theoretical modeling of U 3 Al 2 Ge 3 . Analysis of the SANS data reveals a phase transition to sinusoidally modulated magnetic order at T N = 63 K to be second order and a first-order phase transition to ferromagnetic order at T c = 48 K. Within the sinusoidally modulated magnetic phase (T c < T < T N), we uncover a dramatic change, by a factor of 3, in the ordering wave vector as a function of temperature. Finally, these observations all indicate that U 3 Al 2 Ge 3 is a close realization of the three-dimensional axial next-nearest-neighbor Ising model, a prototypical framework for describing commensurate to incommensurate phase transitions in frustrated magnets.« less

Realization of the axial next-nearest-neighbor Ising model in U 3 Al 2 Ge 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fobes, David M.; Lin, Shi-Zeng; Ghimire, Nirmal J.

Inmore » this paper, we report small-angle neutron scattering (SANS) measurements and theoretical modeling of U 3 Al 2 Ge 3 . Analysis of the SANS data reveals a phase transition to sinusoidally modulated magnetic order at T N = 63 K to be second order and a first-order phase transition to ferromagnetic order at T c = 48 K. Within the sinusoidally modulated magnetic phase (T c < T < T N), we uncover a dramatic change, by a factor of 3, in the ordering wave vector as a function of temperature. Finally, these observations all indicate that U 3 Al 2 Ge 3 is a close realization of the three-dimensional axial next-nearest-neighbor Ising model, a prototypical framework for describing commensurate to incommensurate phase transitions in frustrated magnets.« less

The Relationship of Complex Post-traumatic Stress Disorder and Post-traumatic Stress Disorder in a Culturally Distinct, Conflict-Affected Population: A Study among West Papuan Refugees Displaced to Papua New Guinea.

PubMed

Silove, Derrick; Tay, Alvin Kuowei; Kareth, Moses; Rees, Susan

2017-01-01

Controversy continues about the validity of the construct of complex post-traumatic stress disorder (C-PTSD). In particular, questions remain whether C-PTSD can be differentiated from post-traumatic stress disorder (PTSD) and, secondarily, other common mental disorders. The examination of these issues needs to be expanded to populations of diverse cultural backgrounds exposed to prolonged persecution. We undertake such an inquiry among a community sample of West Papuan refugees exposed to extensive persecution and trauma. We interviewed over 300 West Papuan refugees using the Refugee-Mental Health Assessment Package to record symptoms of PTSD, C-PTSD, major depressive disorder (MDD), and complex grief (CG). We used first- and second-order confirmatory factor analysis (CFA) to test aspects of the convergent and discriminant validity of C-PTSD. The CFA analysis supported both a one-factor and two-factor model of PTSD and C-PTSD. Nested model comparison tests provide support for the parsimonious one-factor model solution. A second-order CFA model of PTSD and C-PTSD produced a poor fit. The modified three-factor multi-disorder solution combining a traumatic stress (TS) factor (amalgamating PTSD and C-PTSD), MDD, and CG yielded a good fit only after removing three CG domains (estrangement, yearning, and behavioral change), a model that produced large standardized residuals (>0.20). The most parsimonious model yielded a single TS factor combining symptom domains of C-PTSD and PTSD in this culturally distinct community exposed to extensive persecution and conflict-related trauma. There may be grounds for expanding the scope of psychological treatments for refugees to encompass this wider TS response. Our findings are consistent with theoretical frameworks focusing on the wider TS reaction of refugees exposed to human rights-related traumas of mass conflict, persecution, and displacement.

Subcomponents of Second-Language Aptitude and Second-Language Proficiency

ERIC Educational Resources Information Center

Sparks, Richard L.; Humbach, Nancy; Patton, Jon; Ganschow, Leonore

2011-01-01

A factor analysis of a test battery that included early first-language (L1) achievement, L1 cognitive ability, second-language (L2) aptitude, and L2 affective measures to predict oral and written L2 proficiency was conducted. The analysis yielded 4 factors that were labeled Language Analysis, composed of L1 and L2 language comprehension, grammar,…

Spectrum Modal Analysis for the Detection of Low-Altitude Windshear with Airborne Doppler Radar

NASA Technical Reports Server (NTRS)

Kunkel, Matthew W.

1992-01-01

A major obstacle in the estimation of windspeed patterns associated with low-altitude windshear with an airborne pulsed Doppler radar system is the presence of strong levels of ground clutter which can strongly bias a windspeed estimate. Typical solutions attempt to remove the clutter energy from the return through clutter rejection filtering. Proposed is a method whereby both the weather and clutter modes present in a return spectrum can be identified to yield an unbiased estimate of the weather mode without the need for clutter rejection filtering. An attempt will be made to show that modeling through a second order extended Prony approach is sufficient for the identification of the weather mode. A pattern recognition approach to windspeed estimation from the identified modes is derived and applied to both simulated and actual flight data. Comparisons between windspeed estimates derived from modal analysis and the pulse-pair estimator are included as well as associated hazard factors. Also included is a computationally attractive method for estimating windspeeds directly from the coefficients of a second-order autoregressive model. Extensions and recommendations for further study are included.

A qualitative exploration of the motives behind the decision to order a liver function test in primary care.

PubMed

Litchfield, I J; Lilford, R J; Bentham, L M; Greenfield, S M

2014-01-01

The number of tests ordered in primary care continues to increase influenced by a number of factors not all of which are concerned with diagnosis and management of disease. Liver function tests (LFTs) are a good example of inexpensive tests that are frequently ordered in patients with non-specific symptoms. They remain among the most frequently ordered tests despite their lack of specificity yet the full range of motives behind the decision to order an LFT remains unexplored. To gain an understanding of the family practitioner's (FP) medical and non-medical motives for ordering an LFT and the influence of various social and technical factors on this decision. We interviewed FPs across six practices who were participating in a prospective study of the efficacy of an abnormal LFT to indicate the development of a serious liver disease. Following content analysis of the data from the semi-structured interviews we used the 'attitude-social influence-efficacy' model to categorise the determinants of test ordering behaviour. Factors influencing an FP's decision to order a test were grouped into two broad categories; the first is 'internal' including expectation of efficacy and general attitude towards LFTs. The second group is 'external' and consists of themes of social influence, tests characteristics and defensive medicine. Whilst our sample acknowledged the clinical use of LFTs such as the routine monitoring of medication and liver-specific diagnostic purposes we also found that social and behavioural reasons are strong motivators to order an LFT and may take precedence over clinical factors.

Two-stage hepatectomy: who will not jump over the second hurdle?

PubMed

Turrini, O; Ewald, J; Viret, F; Sarran, A; Goncalves, A; Delpero, J-R

2012-03-01

Two-stage hepatectomy uses compensatory liver regeneration after a first noncurative hepatectomy to enable a second curative resection in patients with bilobar colorectal liver metastasis (CLM). To determine the predictive factors of failure of two-stage hepatectomy. Between 2000 and 2010, 48 patients with irresectable CLM were eligible for two-stage hepatectomy. The planned strategy was a) cleaning of the left hepatic lobe (first hepatectomy), b) right portal vein embolisation and c) right hepatectomy (second hepatectomy). Six patients had occult CLM (n = 5) or extra-hepatic disease (n = 1), which was discovered during the first hepatectomy. Thus, 42 patients completed the first hepatectomy and underwent portal vein embolisation in order to receive the second hepatectomy. Eight patients did not undergo a second hepatectomy due to disease progression. Upon univariate analysis, two factors were identified that precluded patients from having the second hepatectomy: the combined resection of a primary tumour during the first hepatectomy (p = 0.01) and administration of chemotherapy between the two hepatectomies (p = 0.03). An independent association with impairment to perform the two-stage strategy was demonstrated by multivariate analysis for only the combined resection of the primary colorectal cancer during the first hepatectomy (p = 0.04). Due to the small number of patients and the absence of equivalent conclusions in other studies, we cannot recommend performance of an isolated colorectal resection prior to chemotherapy. However, resection of an asymptomatic primary tumour before chemotherapy should not be considered as an outdated procedure. Copyright © 2011 Elsevier Ltd. All rights reserved.

Optimum sensitivity derivatives of objective functions in nonlinear programming

NASA Technical Reports Server (NTRS)

Barthelemy, J.-F. M.; Sobieszczanski-Sobieski, J.

1983-01-01

The feasibility of eliminating second derivatives from the input of optimum sensitivity analyses of optimization problems is demonstrated. This elimination restricts the sensitivity analysis to the first-order sensitivity derivatives of the objective function. It is also shown that when a complete first-order sensitivity analysis is performed, second-order sensitivity derivatives of the objective function are available at little additional cost. An expression is derived whose application to linear programming is presented.

Work Engagement among Rescue Workers: Psychometric Properties of the Portuguese UWES

PubMed Central

Sinval, Jorge; Marques-Pinto, Alexandra; Queirós, Cristina; Marôco, João

2018-01-01

Rescue workers have a stressful and risky occupation where being engaged is crucial to face physical and emotional risks in order to help other persons. This study aims to estimate work engagement levels of rescue workers (namely comparing nurses, firefighters, and police officers) and to assess the validity evidence related to the internal structure of the Portuguese versions of the UWES-17 and UWES-9, namely, dimensionality, measurement invariance between occupational groups, and reliability of the scores. To evaluate the dimensionality, we compared the fit of the three-factor model with the fit of a second-order model. A Portuguese version of the instrument was applied to a convenience sample of 3,887 rescue workers (50% nurses, 39% firefighters, and 11% police officers). Work engagement levels were moderate to high, with firefighters being the highest and nurses being the lowest engaged. Psychometric properties were evaluated in the three-factor original structure revealing acceptable fit to the data in the UWES-17, although the UWES-9 had better psychometric properties. Given the observed statistically significant correlations between the three original factors, we proposed a 2nd hierarchal structure that we named work engagement. The UWES-9 first-order model obtained full uniqueness measurement invariance, and the second-order model obtained partial (metric) second-order invariance. PMID:29403403

Experimental characterization of a quantum many-body system via higher-order correlations.

PubMed

Schweigler, Thomas; Kasper, Valentin; Erne, Sebastian; Mazets, Igor; Rauer, Bernhard; Cataldini, Federica; Langen, Tim; Gasenzer, Thomas; Berges, Jürgen; Schmiedmayer, Jörg

2017-05-17

Quantum systems can be characterized by their correlations. Higher-order (larger than second order) correlations, and the ways in which they can be decomposed into correlations of lower order, provide important information about the system, its structure, its interactions and its complexity. The measurement of such correlation functions is therefore an essential tool for reading, verifying and characterizing quantum simulations. Although higher-order correlation functions are frequently used in theoretical calculations, so far mainly correlations up to second order have been studied experimentally. Here we study a pair of tunnel-coupled one-dimensional atomic superfluids and characterize the corresponding quantum many-body problem by measuring correlation functions. We extract phase correlation functions up to tenth order from interference patterns and analyse whether, and under what conditions, these functions factorize into correlations of lower order. This analysis characterizes the essential features of our system, the relevant quasiparticles, their interactions and topologically distinct vacua. From our data we conclude that in thermal equilibrium our system can be seen as a quantum simulator of the sine-Gordon model, relevant for diverse disciplines ranging from particle physics to condensed matter. The measurement and evaluation of higher-order correlation functions can easily be generalized to other systems and to study correlations of any other observable such as density, spin and magnetization. It therefore represents a general method for analysing quantum many-body systems from experimental data.

Validation of the German version of the Burn Specific Health Scale-Brief (BSHS-B).

PubMed

Müller, Astrid; Smits, Dirk; Jasper, Stefanie; Berg, Lea; Claes, Laurence; Ipaktchi, Ramin; Vogt, Peter M; de Zwaan, Martina

2015-09-01

The Burn Specific Health Scale-Brief (BSHS-B) is recognized as a valid self-rating scale to evaluate quality of life after burn. To validate the translated German version of the BSHS-B. One hundred and forty one burn survivors (65.2% men) with a mean age of 49.62 years (SD=15.16) and a mean duration after burn of 45.01 months (SD=26.18) answered the BSHS-B. Factor structure was tested by using confirmatory factor analysis, reliability (internal consistency) of the scales was determined by means of Cronbach's α. Construct validity was explored through correlations between the BSHS-B and the Short-Form 8 Health Survey (SF-8). In addition, the know-groups technique was used to determine to which degree the BSHS-B discriminates between patients with low and high burn severity based on the abbreviated burn severity index (ABSI). The Hospital Anxiety and Depression Scale (HADS) was used to examine criterion validity. The nine BSHS-B subscales showed good internal consistency. A second-order confirmatory factor analysis revealed the following main components: (1) Affect and Relationship, (2) Function and (3) Skin Involvement. The second-order factors were positively correlated with the SF-8 and negatively correlated with symptoms of anxiety and depression. Patients with low ABSI scored higher on all three BSHS-B domains than those with high ABSI. The results indicate good psychometric properties of the German BSHS-B. Further studies are needed to investigate the utility of the questionnaire in clinical routine practice, evaluation of burn management programs, and burn-specific research. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

A spatial analysis of Phytophthora ramorum symptom spread using second-order point pattern and GIS-based analyses

Treesearch

Mark Spencer; Kevin O' Hara

2006-01-01

Phytophthora ramorum is a major source of tanoak (Lithocarpus densiflorus) mortality in the tanoak/redwood (Sequoia sempervirens) forests of central California. This study presents a spatial analysis of the spread of the disease using second-order point pattern and GIS analyses. Our data set includes four plots...

USAF Summer Research Program - 1994 Summer Faculty Research Program Final Reports, Volume 2A, Armstrong Laboratory.

DTIC Science & Technology

1994-12-01

meta-analytic approach . Journal of Applied Psychology , 76, 432-446. 6-14 Raju, N.S., & Dowhower, D.P. (1991). The effect of second-order sampling on the... Psychology . HARPER, G., & KEMBER, D. (1989). Interpretation of factor analysis from the approaches to studying inventory. British Journal of Educational...Contemporary Educational Psychology , 12, 381-385. TRIGWELL, K., & PROSSER, M. (1991). Relating approaches to study and quality of learning outcomes at

First-Order or Second-Order Kinetics? A Monte Carlo Answer

ERIC Educational Resources Information Center

Tellinghuisen, Joel

2005-01-01

Monte Carlo computational experiments reveal that the ability to discriminate between first- and second-order kinetics from least-squares analysis of time-dependent concentration data is better than implied in earlier discussions of the problem. The problem is rendered as simple as possible by assuming that the order must be either 1 or 2 and that…

Assessment of awareness of connectedness as a culturally-based protective factor for Alaska native youth.

PubMed

Mohatt, Nathaniel V; Fok, Carlotta Ching Ting; Burket, Rebekah; Henry, David; Allen, James

2011-10-01

Research with Native Americans has identified connectedness as a culturally based protective factor against substance abuse and suicide. Connectedness refers to the interrelated welfare of the individual, one's family, one's community, and the natural environment. We developed an 18-item quantitative assessment of awareness of connectedness and tested it with 284 Alaska Native youth. Evaluation with confirmatory factor analysis and item response theory identified a 12-item subset that functions satisfactorily in a second-order four-factor model. The proposed Awareness of Connectedness Scale (ACS) displays good convergent and discriminant validity, and correlates positively with hypothesized protective factors such as reasons for living and communal mastery. The measure has utility in the study of culture-specific protective factors and as an outcomes measure for behavioral health programs with Native American youth.

Assessment of Awareness of Connectedness as a Culturally-based Protective Factor for Alaska Native Youth

PubMed Central

Mohatt, Nathaniel V.; Fok, Carlotta Ching Ting; Burket, Rebekah; Henry, David; Allen, James

2011-01-01

Research with Native Americans has identified connectedness as a culturally-based protective factor against substance abuse and suicide. Connectedness refers to the interrelated welfare of the individual, one’s family, one’s community, and the natural environment. We developed an 18-item quantitative assessment of awareness of connectedness and tested it with 284 Alaska Native youth. Evaluation with confirmatory factor analysis and item response theory identified a 12-item subset that functions satisfactorily in a second-order, four-factor model. The proposed Awareness of Connectedness Scale displays good convergent and discriminant validity and correlates positively with hypothesized protective factors such as reasons for living and communal mastery. The measure has utility in the study of culture-specific protective factors and as an outcomes measure for behavioral health programs with Native American youth. PMID:21988583

Bifactor structure of the Wechsler Preschool and Primary Scale of Intelligence--Fourth Edition.

PubMed

Watkins, Marley W; Beaujean, A Alexander

2014-03-01

The Wechsler Preschool and Primary Scale of Intelligence--Fourth Edition (WPPSI-IV; Wechsler, 2012) represents a substantial departure from its predecessor, including omission of 4 subtests, addition of 5 new subtests, and modification of the contents of the 5 retained subtests. Wechsler (2012) explicitly assumed a higher-order structure with general intelligence (g) as the second-order factor that explained all the covariation of several first-order factors but failed to consider a bifactor model. The WPPSI-IV normative sample contains 1,700 children aged 2 years and 6 months through 7 years and 7 months, bifurcated into 2 age groups: 2:6-3:11 year olds (n = 600) and 4:0-7:7 year olds (n = 1,100). This study applied confirmatory factor analysis to the WPPSI-IV normative sample data to test the fit of a bifactor model and to determine the reliability of the resulting factors. The bifactor model fit the WPPSI-IV normative sample data as well as or better than the higher-order models favored by Wechsler (2012). In the bifactor model, the general factor accounted for more variance in every subtest than did its corresponding domain-specific factor and the general factor accounted for more total and common variance than all domain-specific factors combined. Further, the domain-specific factors exhibited poor reliability independent of g (i.e., ωh coefficients of .05 to .33). These results suggest that only the general intelligence dimension was sufficiently robust and precise for clinical use. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Thinker, Soldier, Scribe: cross-sectional study of researchers' roles and author order in the Annals of Internal Medicine.

PubMed

Perneger, Thomas V; Poncet, Antoine; Carpentier, Marc; Agoritsas, Thomas; Combescure, Christophe; Gayet-Ageron, Angèle

2017-06-24

How researchers' contributions relate to author order on the byline remains unclear. We sought to identify researchers' contributions associated with author order, and to explore the existence of author profiles. Observational study. Published record. 1139 authors of 119 research articles published in 2015 in the Annals of Internal Medicine . Presence or absence of 10 contributions, reported by each author, published in the journal. On average, first authors reported 7.1 contributions, second authors 5.2, middle authors 4.0, penultimate authors 4.5 and last authors 6.4 (p<0.001). The first author made the greatest contributions to drafting the article, designing the study, analysing and interpreting the data, and providing study materials or patients. The second author contributed to data analysis as well and to drafting the article. The last author was most involved in obtaining the funding, critically revising the article, designing the study and providing support. Factor analysis yielded three author profiles- Thinker (study design, revision of article, obtaining funding), Soldier (providing material or patients, providing administrative and logistical support, collecting data) and Scribe (analysis and interpretation of data, drafting the article, statistical expertise). These profiles do not strictly correspond to byline position. First, second and last authors of research articles made distinct contributions to published research. Three authorship profiles can be used to summarise author contributions. These findings shed light on the organisation of clinical research teams and may help researchers discuss, plan and report authorship in a more transparent way. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Listening in a Multilingual World: The Challenges of Second Language (L2) Listening

ERIC Educational Resources Information Center

Rost, Michael

2014-01-01

Research into language acquisition and oral language use was examined in order to identify key factors that contribute to the successful acquisition of second language (L2) listening ability. The factors were grouped into three major domains: affective, cognitive, and interpersonal. It is claimed that in each domain, proficient L2 listeners have…

Biomotor structures in elite female handball players.

PubMed

Katić, Ratko; Cavala, Marijana; Srhoj, Vatromir

2007-09-01

In order to identify biomotor structures in elite female handball players, factor structures of morphological characteristics and basic motor abilities of elite female handball players (N = 53) were determined first, followed by determination of relations between the morphological-motor space factors obtained and the set of criterion variables evaluating situation motor abilities in handball. Factor analysis of 14 morphological measures produced three morphological factors, i.e. factor of absolute voluminosity (mesoendomorph), factor of longitudinal skeleton dimensionality, and factor of transverse hand dimensionality. Factor analysis of 15 motor variables yielded five basic motor dimensions, i.e. factor of agility, factor of jumping explosive strength, factor of throwing explosive strength, factor of movement frequency rate, and factor of running explosive strength (sprint). Four significant canonic correlations, i.e. linear combinations, explained the correlation between the set of eight latent variables of the morphological and basic motor space and five variables of situation motoricity. First canonic linear combination is based on the positive effect of the factors of agility/coordination on the ability of fast movement without ball. Second linear combination is based on the effect of jumping explosive strength and transverse hand dimensionality on ball manipulation, throw precision, and speed of movement with ball. Third linear combination is based on the running explosive strength determination by the speed of movement with ball, whereas fourth combination is determined by throwing and jumping explosive strength, and agility on ball pass. The results obtained were consistent with the model of selection in female handball proposed (Srhoj et al., 2006), showing the speed of movement without ball and the ability of ball manipulation to be the predominant specific abilities, as indicated by the first and second linear combination.

Complementary exploratory and confirmatory factor analyses of the French WISC-V: Analyses based on the standardization sample.

PubMed

Lecerf, Thierry; Canivez, Gary L

2018-06-01

Interpretation of the French Wechsler Intelligence Scale for Children-Fifth Edition (French WISC-V; Wechsler, 2016a) is based on a 5-factor model including Verbal Comprehension (VC), Visual Spatial (VS), Fluid Reasoning (FR), Working Memory (WM), and Processing Speed (PS). Evidence for the French WISC-V factorial structure was established exclusively through confirmatory factor analyses (CFAs). However, as recommended by Carroll (1995); Reise (2012), and Brown (2015), factorial structure should derive from both exploratory factor analysis (EFA) and CFA. The first goal of this study was to examine the factorial structure of the French WISC-V using EFA. The 15 French WISC-V primary and secondary subtest scaled scores intercorrelation matrix was used and factor extraction criteria suggested from 1 to 4 factors. To disentangle the contribution of first- and second-order factors, the Schmid and Leiman (1957) orthogonalization transformation (SLT) was applied. Overall, no EFA evidence for 5 factors was found. Results indicated that the g factor accounted for about 67% of the common variance and that the contributions of the first-order factors were weak (3.6 to 11.9%). CFA was used to test numerous alternative models. Results indicated that bifactor models produced better fit to these data than higher-order models. Consistent with previous studies, findings suggested dominance of the general intelligence factor and that users should thus emphasize the Full Scale IQ (FSIQ) when interpreting the French WISC-V. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Stirling engine design manual

NASA Technical Reports Server (NTRS)

Martini, W. R.

1978-01-01

This manual is intended to serve both as an introduction to Stirling engine analysis methods and as a key to the open literature on Stirling engines. Over 800 references are listed and these are cross referenced by date of publication, author and subject. Engine analysis is treated starting from elementary principles and working through cycles analysis. Analysis methodologies are classified as first, second or third order depending upon degree of complexity and probable application; first order for preliminary engine studies, second order for performance prediction and engine optimization, and third order for detailed hardware evaluation and engine research. A few comparisons between theory and experiment are made. A second order design procedure is documented step by step with calculation sheets and a worked out example to follow. Current high power engines are briefly described and a directory of companies and individuals who are active in Stirling engine development is included. Much remains to be done. Some of the more complicated and potentially very useful design procedures are now only referred to. Future support will enable a more thorough job of comparing all available design procedures against experimental data which should soon be available.

Enhanced efficiency of the second harmonic inhomogeneous component in an opaque cavity.

PubMed

Roppo, V; Raineri, F; Raj, R; Sagnes, I; Trull, J; Vilaseca, R; Scalora, M; Cojocaru, C

2011-05-15

In this Letter, we experimentally demonstrate the enhancement of the inhomogeneous second harmonic conversion in the opaque region of a GaAs cavity with efficiencies of the order of 0.1% at 612 nm, using 3 ps pump pulses having peak intensities of the order of 10 MW/cm(2). We show that the conversion efficiency of the inhomogeneous, phase-locked second harmonic component is a quadratic function of the cavity factor Q. © 2011 Optical Society of America

Development and Application of Modern Optimal Controllers for a Membrane Structure Using Vector Second Order Form

NASA Astrophysics Data System (ADS)

Ferhat, Ipar

With increasing advancement in material science and computational power of current computers that allows us to analyze high dimensional systems, very light and large structures are being designed and built for aerospace applications. One example is a reflector of a space telescope that is made of membrane structures. These reflectors are light and foldable which makes the shipment easy and cheaper unlike traditional reflectors made of glass or other heavy materials. However, one of the disadvantages of membranes is that they are very sensitive to external changes, such as thermal load or maneuvering of the space telescope. These effects create vibrations that dramatically affect the performance of the reflector. To overcome vibrations in membranes, in this work, piezoelectric actuators are used to develop distributed controllers for membranes. These actuators generate bending effects to suppress the vibration. The actuators attached to a membrane are relatively thick which makes the system heterogeneous; thus, an analytical solution cannot be obtained to solve the partial differential equation of the system. Therefore, the Finite Element Model is applied to obtain an approximate solution for the membrane actuator system. Another difficulty that arises with very flexible large structures is the dimension of the discretized system. To obtain an accurate result, the system needs to be discretized using smaller segments which makes the dimension of the system very high. This issue will persist as long as the improving technology will allow increasingly complex and large systems to be designed and built. To deal with this difficulty, the analysis of the system and controller development to suppress the vibration are carried out using vector second order form as an alternative to vector first order form. In vector second order form, the number of equations that need to be solved are half of the number equations in vector first order form. Analyzing the system for control characteristics such as stability, controllability and observability is a key step that needs to be carried out before developing a controller. This analysis determines what kind of system is being modeled and the appropriate approach for controller development. Therefore, accuracy of the system analysis is very crucial. The results of the system analysis using vector second order form and vector first order form show the computational advantages of using vector second order form. Using similar concepts, LQR and LQG controllers, that are developed to suppress the vibration, are derived using vector second order form. To develop a controller using vector second order form, two different approaches are used. One is reducing the size of the Algebraic Riccati Equation to half by partitioning the solution matrix. The other approach is using the Hamiltonian method directly in vector second order form. Controllers are developed using both approaches and compared to each other. Some simple solutions for special cases are derived for vector second order form using the reduced Algebraic Riccati Equation. The advantages and drawbacks of both approaches are explained through examples. System analysis and controller applications are carried out for a square membrane system with four actuators. Two different systems with different actuator locations are analyzed. One system has the actuators at the corners of the membrane, the other has the actuators away from the corners. The structural and control effect of actuator locations are demonstrated with mode shapes and simulations. The results of the controller applications and the comparison of the vector first order form with the vector second order form demonstrate the efficacy of the controllers.

Second-order sliding mode control with experimental application.

PubMed

Eker, Ilyas

2010-07-01

In this article, a second-order sliding mode control (2-SMC) is proposed for second-order uncertain plants using equivalent control approach to improve the performance of control systems. A Proportional + Integral + Derivative (PID) sliding surface is used for the sliding mode. The sliding mode control law is derived using direct Lyapunov stability approach and asymptotic stability is proved theoretically. The performance of the closed-loop system is analysed through an experimental application to an electromechanical plant to show the feasibility and effectiveness of the proposed second-order sliding mode control and factors involved in the design. The second-order plant parameters are experimentally determined using input-output measured data. The results of the experimental application are presented to make a quantitative comparison with the traditional (first-order) sliding mode control (SMC) and PID control. It is demonstrated that the proposed 2-SMC system improves the performance of the closed-loop system with better tracking specifications in the case of external disturbances, better behavior of the output and faster convergence of the sliding surface while maintaining the stability. 2010 ISA. Published by Elsevier Ltd. All rights reserved.

Assessing School Work Culture: A Higher-Order Analysis and Strategy.

ERIC Educational Resources Information Center

Johnson, William L.; Johnson, Annabel M.; Zimmerman, Kurt J.

This paper reviews a work culture productivity model and reports the development of a work culture instrument based on the culture productivity model. Higher order principal components analysis was used to assess work culture, and a third-order factor analysis shows how the first-order factors group into higher-order factors. The school work…

High-order upwind schemes for the wave equation on overlapping grids: Maxwell's equations in second-order form

DOE Office of Scientific and Technical Information (OSTI.GOV)

Angel, Jordan B.; Banks, Jeffrey W.; Henshaw, William D.

High-order accurate upwind approximations for the wave equation in second-order form on overlapping grids are developed. Although upwind schemes are well established for first-order hyperbolic systems, it was only recently shown by Banks and Henshaw how upwinding could be incorporated into the second-order form of the wave equation. This new upwind approach is extended here to solve the time-domain Maxwell's equations in second-order form; schemes of arbitrary order of accuracy are formulated for general curvilinear grids. Taylor time-stepping is used to develop single-step space-time schemes, and the upwind dissipation is incorporated by embedding the exact solution of a local Riemannmore » problem into the discretization. Second-order and fourth-order accurate schemes are implemented for problems in two and three space dimensions, and overlapping grids are used to treat complex geometry and problems with multiple materials. Stability analysis of the upwind-scheme on overlapping grids is performed using normal mode theory. The stability analysis and computations confirm that the upwind scheme remains stable on overlapping grids, including the difficult case of thin boundary grids when the traditional non-dissipative scheme becomes unstable. The accuracy properties of the scheme are carefully evaluated on a series of classical scattering problems for both perfect conductors and dielectric materials in two and three space dimensions. Finally, the upwind scheme is shown to be robust and provide high-order accuracy.« less

High-order upwind schemes for the wave equation on overlapping grids: Maxwell's equations in second-order form

DOE PAGES

Angel, Jordan B.; Banks, Jeffrey W.; Henshaw, William D.

2017-09-28

High-order accurate upwind approximations for the wave equation in second-order form on overlapping grids are developed. Although upwind schemes are well established for first-order hyperbolic systems, it was only recently shown by Banks and Henshaw how upwinding could be incorporated into the second-order form of the wave equation. This new upwind approach is extended here to solve the time-domain Maxwell's equations in second-order form; schemes of arbitrary order of accuracy are formulated for general curvilinear grids. Taylor time-stepping is used to develop single-step space-time schemes, and the upwind dissipation is incorporated by embedding the exact solution of a local Riemannmore » problem into the discretization. Second-order and fourth-order accurate schemes are implemented for problems in two and three space dimensions, and overlapping grids are used to treat complex geometry and problems with multiple materials. Stability analysis of the upwind-scheme on overlapping grids is performed using normal mode theory. The stability analysis and computations confirm that the upwind scheme remains stable on overlapping grids, including the difficult case of thin boundary grids when the traditional non-dissipative scheme becomes unstable. The accuracy properties of the scheme are carefully evaluated on a series of classical scattering problems for both perfect conductors and dielectric materials in two and three space dimensions. Finally, the upwind scheme is shown to be robust and provide high-order accuracy.« less

High-order upwind schemes for the wave equation on overlapping grids: Maxwell's equations in second-order form

NASA Astrophysics Data System (ADS)

Angel, Jordan B.; Banks, Jeffrey W.; Henshaw, William D.

2018-01-01

High-order accurate upwind approximations for the wave equation in second-order form on overlapping grids are developed. Although upwind schemes are well established for first-order hyperbolic systems, it was only recently shown by Banks and Henshaw [1] how upwinding could be incorporated into the second-order form of the wave equation. This new upwind approach is extended here to solve the time-domain Maxwell's equations in second-order form; schemes of arbitrary order of accuracy are formulated for general curvilinear grids. Taylor time-stepping is used to develop single-step space-time schemes, and the upwind dissipation is incorporated by embedding the exact solution of a local Riemann problem into the discretization. Second-order and fourth-order accurate schemes are implemented for problems in two and three space dimensions, and overlapping grids are used to treat complex geometry and problems with multiple materials. Stability analysis of the upwind-scheme on overlapping grids is performed using normal mode theory. The stability analysis and computations confirm that the upwind scheme remains stable on overlapping grids, including the difficult case of thin boundary grids when the traditional non-dissipative scheme becomes unstable. The accuracy properties of the scheme are carefully evaluated on a series of classical scattering problems for both perfect conductors and dielectric materials in two and three space dimensions. The upwind scheme is shown to be robust and provide high-order accuracy.

An analysis of stream channel cross section technique as a means to determine anthropogenic change in second order streams at the Tenderfoot Creek Experimental Forest, Meagher County, Montana

Treesearch

Jeff Boice

1999-01-01

Five second order tributaries to Tenderfoot Creek were investigated: Upper Tenderfoot Creek, Sun Creek, Spring Park Creek, Bubbling Creek, and Stringer Creek. Second order reaches were initially located on 7.5 minute topographic maps using techniques first applied by Strahler (1952). Reach breaks were determined in the field through visual inspection. Vegetation type (...

Variations in algorithm implementation among quantitative texture analysis software packages

NASA Astrophysics Data System (ADS)

Foy, Joseph J.; Mitta, Prerana; Nowosatka, Lauren R.; Mendel, Kayla R.; Li, Hui; Giger, Maryellen L.; Al-Hallaq, Hania; Armato, Samuel G.

2018-02-01

Open-source texture analysis software allows for the advancement of radiomics research. Variations in texture features, however, result from discrepancies in algorithm implementation. Anatomically matched regions of interest (ROIs) that captured normal breast parenchyma were placed in the magnetic resonance images (MRI) of 20 patients at two time points. Six first-order features and six gray-level co-occurrence matrix (GLCM) features were calculated for each ROI using four texture analysis packages. Features were extracted using package-specific default GLCM parameters and using GLCM parameters modified to yield the greatest consistency among packages. Relative change in the value of each feature between time points was calculated for each ROI. Distributions of relative feature value differences were compared across packages. Absolute agreement among feature values was quantified by the intra-class correlation coefficient. Among first-order features, significant differences were found for max, range, and mean, and only kurtosis showed poor agreement. All six second-order features showed significant differences using package-specific default GLCM parameters, and five second-order features showed poor agreement; with modified GLCM parameters, no significant differences among second-order features were found, and all second-order features showed poor agreement. While relative texture change discrepancies existed across packages, these differences were not significant when consistent parameters were used.

Psychometric Properties of the Behavioral Inhibition Questionnaire in Preschool Children

PubMed Central

Kim, Jiyon; Klein, Daniel N.; Olino, Thomas M.; Dyson, Margaret W.; Dougherty, Lea R.; Durbin, C. Emily

2012-01-01

We examined the psychometric properties of the Behavioral Inhibition Questionnaire (BIQ), a rating scale for children’s behavioral inhibition (BI). Parent and teacher ratings, parent interviews, and laboratory observations were obtained for 495 preschoolers. Confirmatory factor analysis yielded six factors, each reflecting the BIQ’s subscales, and all loading onto a second-order general dimension. Model fit was acceptable for parent ratings, but only marginal for teacher ratings. The convergent and discriminant validity of the BIQ was examined by using a multitrait multimethod approach. Results indicate that the BIQ displays evidence of reliability and validity that can complement observational paradigms. PMID:21999378

[Incidence and surgical wound infection risk factors in breast cancer surgery].

PubMed

Lefebvre, D; Penel, N; Deberles, M F; Fournier, C

2000-11-18

In order to evaluate occurrence and risk factors for wound infection (WI) in breast cancer surgery, we carried out a prospective study. From September 1996 through April 1997, an infection control physician prospectively evaluated 542 wounds of all patients having breast cancer surgery at the Oscar Lambret Cancer Center. WI was defined as a wound with pus. Antibiotic prophylaxis was given in case of immediate breast reconstruction. Statistical evaluation was performed using the c < or = test for categorial data and non-parametric Mann-Whitney test for continuous data. In univariate analysis, differences were considered significant at p < 0.01. The overall WI rate was 3.51% (19/352). In univariate analysis, risk factors for WI were: total preoperative hospital stay (p = 0.01), previous chemotherapy (p = 0.01), previous oncologic surgery (p = 0.03) and immediate breast reconstruction (p = 0.002). In mutivariate analysis, we observed two independent predictive factors for WI: previous chemotherapy (p = 0.05) and immediate breast reconstruction (p = 0.02). Previous anticancer chemotherapy was a major risk factor. In these cases, a phase III trial could confirm efficacy of standard antibiotic prophylaxis. Breast reconstruction was the second major risk factor. Standard antibiotic prophylaxis (used in our study) was insufficient.

Second harmonic generation and crystal growth of new chalcone derivatives

NASA Astrophysics Data System (ADS)

Patil, P. S.; Dharmaprakash, S. M.; Ramakrishna, K.; Fun, Hoong-Kun; Sai Santosh Kumar, R.; Narayana Rao, D.

2007-05-01

We report on the synthesis, crystal structure and optical characterization of chalcone derivatives developed for second-order nonlinear optics. The investigation of a series of five chalcone derivatives with the second harmonic generation powder test according to Kurtz and Perry revealed that these chalcones show efficient second-order nonlinear activity. Among them, high-quality single crystals of 3-Br-4'-methoxychalcone (3BMC) were grown by solvent evaporation solution growth technique. Grown crystals were characterized by X-ray powder diffraction (XRD), laser damage threshold, UV-vis-NIR and refractive index measurement studies. Infrared spectroscopy, thermogravimetric analysis and differential thermal analysis measurements were performed to study the molecular vibration and thermal behavior of 3BMC crystal. Thermal analysis does not show any structural phase transition.

Monitoring by forward scatter radar techniques: an improved second-order analytical model

NASA Astrophysics Data System (ADS)

Falconi, Marta Tecla; Comite, Davide; Galli, Alessandro; Marzano, Frank S.; Pastina, Debora; Lombardo, Pierfrancesco

2017-10-01

In this work, a second-order phase approximation is introduced to provide an improved analytical model of the signal received in forward scatter radar systems. A typical configuration with a rectangular metallic object illuminated while crossing the baseline, in far- or near-field conditions, is considered. An improved second-order model is compared with a simplified one already proposed by the authors and based on a paraxial approximation. A phase error analysis is carried out to investigate benefits and limitations of the second-order modeling. The results are validated by developing full-wave numerical simulations implementing the relevant scattering problem on a commercial tool.

Controlling flexible structures with second order actuator dynamics

NASA Technical Reports Server (NTRS)

Inman, Daniel J.; Umland, Jeffrey W.; Bellos, John

1989-01-01

The control of flexible structures for those systems with actuators that are modeled by second order dynamics is examined. Two modeling approaches are investigated. First a stability and performance analysis is performed using a low order finite dimensional model of the structure. Secondly, a continuum model of the flexible structure to be controlled, coupled with lumped parameter second order dynamic models of the actuators performing the control is used. This model is appropriate in the modeling of the control of a flexible panel by proof-mass actuators as well as other beam, plate and shell like structural numbers. The model is verified with experimental measurements.

On current contribution to Fronsdal equations

NASA Astrophysics Data System (ADS)

Misuna, N. G.

2018-03-01

We explore a local form of second-order Vasiliev equations proposed in [arxiv:arXiv:1706.03718] and obtain an explicit expression for quadratic corrections to bosonic Fronsdal equations, generated by gauge-invariant higher-spin currents. Our analysis is performed for general phase factor, and for the case of parity-invariant theory we find the agreement with expressions for cubic vertices available in the literature. This provides an additional indication that local frame proposed in [arxiv:arXiv:1706.03718] is the proper one.

Second order Pseudo-gaussian shaper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beche, Jean-Francois

2002-11-22

The purpose of this document is to provide a calculus spreadsheet for the design of second-order pseudo-gaussian shapers. A very interesting reference is given by C.H. Mosher ''Pseudo-Gaussian Transfer Functions with Superlative Recovery'', IEEE TNS Volume 23, p. 226-228 (1976). Fred Goulding and Don Landis have studied the structure of those filters and their implementation and this document will outline the calculation leading to the relation between the coefficients of the filter. The general equation of the second order pseudo-gaussian filter is: f(t) = P{sub 0} {center_dot} e{sup -3kt} {center_dot} sin{sup 2}(kt). The parameter k is a normalization factor.

A new technique for ordering asymmetrical three-dimensional data sets in ecology.

PubMed

Pavoine, Sandrine; Blondel, Jacques; Baguette, Michel; Chessel, Daniel

2007-02-01

The aim of this paper is to tackle the problem that arises from asymmetrical data cubes formed by two crossed factors fixed by the experimenter (factor A and factor B, e.g., sites and dates) and a factor which is not controlled for (the species). The entries of this cube are densities in species. We approach this kind of data by the comparison of patterns, that is to say by analyzing first the effect of factor B on the species-factor A pattern, and second the effect of factor A on the species-factor B pattern. The analysis of patterns instead of individual responses requires a correspondence analysis. We use a method we call Foucart's correspondence analysis to coordinate the correspondence analyses of several independent matrices of species x factor A (respectively B) type, corresponding to each modality of factor B (respectively A). Such coordination makes it possible to evaluate the effect of factor B (respectively A) on the species-factor A (respectively B) pattern. The results obtained by such a procedure are much more insightful than those resulting from a classical single correspondence analysis applied to the global matrix that is obtained by simply unrolling the data cube, juxtaposing for example the individual species x factor A matrices through modalities of factor B. This is because a single global correspondence analysis combines three effects of factors in a way that cannot be determined from factorial maps (factor A, factor B, and factor A x factor B interaction) whereas the applications of Foucart's correspondence analysis clearly discriminate two different issues. Using two data sets, we illustrate that this technique proves to be particularly powerful in the analyses of ecological convergence which include several distinct data sets and in the analyses of spatiotemporal variations of species distributions.

Bioethics in Denmark. Moving from first- to second-order analysis?

PubMed

Nielsen, Morten Ebbe Juul; Andersen, Martin Marchman

2014-07-01

This article examines two current debates in Denmark--assisted suicide and the prioritization of health resources--and proposes that such controversial bioethical issues call for distinct philosophical analyses: first-order examinations, or an applied philosophy approach, and second-order examinations, what might be called a political philosophical approach. The authors argue that although first-order examination plays an important role in teasing out different moral points of view, in contemporary democratic societies, few, if any, bioethical questions can be resolved satisfactorily by means of first-order analyses alone, and that bioethics needs to engage more closely with second-order enquiries and the question of legitimacy in general.

Rethinking pedagogy for second-order differential equations: a simplified approach to understanding well-posed problems

NASA Astrophysics Data System (ADS)

Tisdell, Christopher C.

2017-07-01

Knowing an equation has a unique solution is important from both a modelling and theoretical point of view. For over 70 years, the approach to learning and teaching 'well posedness' of initial value problems (IVPs) for second- and higher-order ordinary differential equations has involved transforming the problem and its analysis to a first-order system of equations. We show that this excursion is unnecessary and present a direct approach regarding second- and higher-order problems that does not require an understanding of systems.

Pseudo second order kinetics and pseudo isotherms for malachite green onto activated carbon: comparison of linear and non-linear regression methods.

PubMed

Kumar, K Vasanth; Sivanesan, S

2006-08-25

Pseudo second order kinetic expressions of Ho, Sobkowsk and Czerwinski, Blanachard et al. and Ritchie were fitted to the experimental kinetic data of malachite green onto activated carbon by non-linear and linear method. Non-linear method was found to be a better way of obtaining the parameters involved in the second order rate kinetic expressions. Both linear and non-linear regression showed that the Sobkowsk and Czerwinski and Ritchie's pseudo second order model were the same. Non-linear regression analysis showed that both Blanachard et al. and Ho have similar ideas on the pseudo second order model but with different assumptions. The best fit of experimental data in Ho's pseudo second order expression by linear and non-linear regression method showed that Ho pseudo second order model was a better kinetic expression when compared to other pseudo second order kinetic expressions. The amount of dye adsorbed at equilibrium, q(e), was predicted from Ho pseudo second order expression and were fitted to the Langmuir, Freundlich and Redlich Peterson expressions by both linear and non-linear method to obtain the pseudo isotherms. The best fitting pseudo isotherm was found to be the Langmuir and Redlich Peterson isotherm. Redlich Peterson is a special case of Langmuir when the constant g equals unity.

Fostering Resilience: A Necessary Skill for Teacher Retention

NASA Astrophysics Data System (ADS)

Doney, Patricia A.

2013-06-01

The goal of this qualitative 2-year study was to examine the resilience building process in four novice secondary science teachers and its link to teacher retention. To achieve the research goal, a resilience framework was established. Three factors were instrumental in creating the framework. The first focused on stressors and protective factors in the lives of novice secondary science teachers and provided direction and goals for the research. Second, a case study was developed for each of the four teachers participating in the research in order to emphasize the detailed analysis of factors linked to resilience. Finally, cross-case analysis was employed to identify similarities and differences and provide insight into issues concerning the resilience process. Results of this study suggest that the interaction between stressors and protective factors acts as a primary force in the resilience process and stimulate responses to help counteract negative effects of resulting stress. Therefore, it can be reasoned that resilience can be fostered in novice teachers as a means to encourage teacher retention.

Analysis of Dual-Order Backward Pumping Schemes in Distributed Raman Amplification System

NASA Astrophysics Data System (ADS)

Singh, Kulwinder; Patterh, Manjeet Singh; Bhamrah, Manjit Singh

2018-04-01

Backward pumping in fiber Raman amplifiers has been investigated in this paper in terms of on-off Raman gain, noise figure and optical signal-to-noise ratio. The results exhibit that with four first-order pumps and one second-order pump scheme can be employed to achieve 8.2 dB noise figure in 64 channel fiber optic communication system. It has also been reported that 2.65 dB gain ripple, 0.87 dB noise figure tilt and 2.02 dB OSNR tilt can be attained with the second-order pumping in fiber Raman amplifiers. The main advantage of the scheme is that only 50 mW second-order pump shows appreciable improvement in the system performance. It shows that further increase in first-order and second-order pump powers increase system noise implications.

Phenotypic factor analysis of psychopathology reveals a new body-related transdiagnostic factor.

PubMed

Pezzoli, Patrizia; Antfolk, Jan; Santtila, Pekka

2017-01-01

Comorbidity challenges the notion of mental disorders as discrete categories. An increasing body of literature shows that symptoms cut across traditional diagnostic boundaries and interact in shaping the latent structure of psychopathology. Using exploratory and confirmatory factor analysis, we reveal the latent sources of covariation among nine measures of psychopathological functioning in a population-based sample of 13024 Finnish twins and their siblings. By implementing unidimensional, multidimensional, second-order, and bifactor models, we illustrate the relationships between observed variables, specific, and general latent factors. We also provide the first investigation to date of measurement invariance of the bifactor model of psychopathology across gender and age groups. Our main result is the identification of a distinct "Body" factor, alongside the previously identified Internalizing and Externalizing factors. We also report relevant cross-disorder associations, especially between body-related psychopathology and trait anger, as well as substantial sex and age differences in observed and latent means. The findings expand the meta-structure of psychopathology, with implications for empirical and clinical practice, and demonstrate shared mechanisms underlying attitudes towards nutrition, self-image, sexuality and anger, with gender- and age-specific features.

Social anxiety in the general population: introducing abbreviated versions of SIAS and SPS.

PubMed

Kupper, Nina; Denollet, Johan

2012-01-01

Social anxiety is characterized by the experience of stress, discomfort and fear in social situations, and is associated with substantial personal and societal burden. Two questionnaires exist that assess the aspects of social anxiety, i.e. social interaction anxiety (SIAS) and social phobia (SPS). There is no agreement in literature on the dimensionality of social anxiety. Further, the length of a questionnaire may negatively affect response rates and participation at follow-up occasions. To explore the structure of social anxiety in the general population, and to examine psychosocial and sociodemographic correlates. Our second aim was to construct abbreviated versions of SIAS and SPS that can be easily used and with minimal burden. A total of 1598 adults from the general Dutch population completed a survey asking information on social anxiety, mood and demographics. Exploratory and confirmatory factor analyses as well as reliability analysis with item-total statistics were performed. Confirmatory factor analysis revealed a 3-factor structure for social phobia, and a 2-factor structure for the SIAS, with the second factor containing both reversely scored items. The abbreviated versions of SPS (11 items) and SIAS (10 items) show excellent discriminant and construct validity (Cronbach's α=.90 and .92), while specificity analysis showed that gender, marital status and educational level (SIAS(10): p<.0005; SPS(11): p<.0005) are important determinants of social anxiety. In the general population, social interaction anxiety and social phobia are two aspects of a higher-order factor of social anxiety. Social anxiety is validly captured by the short versions of SPS and SIAS, reducing the questionnaire burden for participants in epidemiological and biobehavioral research. Copyright © 2011 Elsevier B.V. All rights reserved.

Validation of the Sexual Orientation Microaggression Inventory In Two Diverse Samples of LGBTQ Youth

PubMed Central

Swann, Gregory; Minshew, Reese; Newcomb, Michael E.; Mustanski, Brian

2016-01-01

Critical race theory asserts that microaggressions, or low-level, covert acts of aggression, are commonplace in the lives of people of color. These theorists also assert a taxonomy of microaggressions, which includes “microassaults,” “microinsults,” and “microinvalidations.” The theory of microaggressions has been adopted by researchers of LGBTQ communities. This study investigated the three-factor taxonomy as it relates to a diverse sample of LGBTQ youth using the newly developed Sexual Orientation Microaggression Inventory (SOMI). Exploratory factor analysis was used to determine the number of factors that exist in SOMI in a sample of 206 LGBTQ-identifying youth. Follow up confirmatory factor analyses (CFAs) were conducted in order to compare single factor, unrestricted four factor, second order, and bi-factor models in a separate sample of 363 young men who have sex with men. The best fitting model was used to predict victimization, depressive symptoms, and depression diagnosis in order to test validity. The best fitting model was a bi-factor model utilizing 19 of the original 26 items with a general factor and four specific factors representing anti-gay attitudes (“microinsults”), denial of homosexuality, heterosexism (“microinvalidations”), and societal disapproval (“microassaults”). Reliability analyses found that the majority of reliable variance was accounted for by the general factor. The general factor was a significant predictor of victimization and depressive symptoms, as well as unrelated to social desirability, suggesting convergent, criterion-related, and discriminant validity. SOMI emerged as a scale with evidence of validity for assessing exposure to microaggressions in a diverse sample of LGBTQ youth. PMID:27067241

Validation of the Sexual Orientation Microaggression Inventory in Two Diverse Samples of LGBTQ Youth.

PubMed

Swann, Gregory; Minshew, Reese; Newcomb, Michael E; Mustanski, Brian

2016-08-01

Critical race theory asserts that microaggressions, or low-level, covert acts of aggression, are commonplace in the lives of people of color. These theorists also assert a taxonomy of microaggressions, which includes "microassaults," "microinsults," and "microinvalidations". The theory of microaggressions has been adopted by researchers of LGBTQ communities. This study investigated the three-factor taxonomy as it relates to a diverse sample of LGBTQ youth using the newly developed Sexual Orientation Microaggression Inventory (SOMI). Exploratory factor analysis was used to determine the number of factors that exist in SOMI in a sample of 206 LGBTQ-identifying youth. Follow up confirmatory factor analyses were conducted in order to compare single-factor, unrestricted four-factor, second-order, and bi-factor models in a separate sample of 363 young men who have sex with men. The best fitting model was used to predict victimization, depressive symptoms, and depression diagnosis in order to test validity. The best fitting model was a bi-factor model utilizing 19 of the original 26 items with a general factor and four specific factors representing anti-gay attitudes ("microinsults"), denial of homosexuality, heterosexism ("microinvalidations"), and societal disapproval ("microassaults"). Reliability analyses found that the majority of reliable variance was accounted for by the general factor. The general factor was a significant predictor of victimization and depressive symptoms, as well as unrelated to social desirability, suggesting convergent, criterion-related, and discriminant validity. SOMI emerged as a scale with evidence of validity for assessing exposure to microaggressions in a diverse sample of LGBTQ youth.

Reionization and its imprint of the cosmic microwave background

NASA Technical Reports Server (NTRS)

Dodelson, Scott; Jubas, Jay M.

1995-01-01

Early reionization changes the pattern of anisotropies expected in the cosmic microwave backgrond. To explore these changes, we derive from first principles the equations governing anisotropies, focusing on the interactions of photons with electrons. Vishniac (1987) claimed that second-order terms can be large in a reionized universe, so we derive equations correct to second order in the perturbations. There are many more second-order terms than were considered by Vishniac. To understand the basic physics involved, we present a simple analytic approximation to the first-order equation. Then, turning to the second order equation, we show that the Vishniac term is indeed the only important one. We also present numerical results for a variety of ionization histories (in a standard cold dark matter universe) and show quantitatively how the signal in several experiments depends on the ionization history. The most pronounced indication of a reionized universe would be seen in very small scale experiments; the expected signal in the Owens Valley experiment is smaller by a factor of order 10 if the last scattering surface is at a redshift z approximately = 100 as it would be if the universe were reionized very early. On slightly larger scales, the expected signal in a reionized universe is smaller than it would be with standard recombination, but only a factor of 2 or so. The signal is even smaller in these experiments in the intermediate case where some photons last scattered at the standard recombination epoch.

Birth order--a risk factor for dental trauma?

PubMed

Käch, Matthias; Krastl, Gabriel; Zitzmann, Nicola U; Kühl, Sebastian; Filippi, Andreas

2014-04-01

Many character traits are influenced by birth order with greatest differences between first and lastborns. To investigate the influence of birth order on the risk of dental trauma. Five hundred mothers in Switzerland were interviewed personally regarding dental trauma in their children. Inclusion criteria were a family size of at least two children. Data of 1282 children were collected. Thirty-two percent of the children had sustained one or more dental trauma before the age of 16 (57% male, 43% female). In children who had sustained dental trauma twice, the gender ratio moved to 68% male and 32% female (P = 0.003). Regarding birth order, lastborns sustained more second dental traumas. Relative risk of second dental trauma was 2.1 times higher in lastborns than in firstborns (P = 0.02). Moreover, certain character traits in children are influenced by birth order. According to their mothers, lastborns were more curious, less calm and less deliberate than firstborns (P < 0.001). Second born without younger siblings were more athletic/active than firstborns (P = 0.011). Athletic/active children as well as not calm/deliberate children sustained second dental trauma more often than not athletic/active (P = 0.038) and calm/deliberate children (P < 0.001). Birth order is a risk factor for sustaining dental trauma twice. Character traits of lastborns (curious, not calm/deliberate and aggressive) could be reasons for higher risk of dental trauma. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effects of Heterogeniety on Spatial Pattern Analysis of Wild Pistachio Trees in Zagros Woodlands, Iran

NASA Astrophysics Data System (ADS)

Erfanifard, Y.; Rezayan, F.

2014-10-01

Vegetation heterogeneity biases second-order summary statistics, e.g., Ripley's K-function, applied for spatial pattern analysis in ecology. Second-order investigation based on Ripley's K-function and related statistics (i.e., L- and pair correlation function g) is widely used in ecology to develop hypothesis on underlying processes by characterizing spatial patterns of vegetation. The aim of this study was to demonstrate effects of underlying heterogeneity of wild pistachio (Pistacia atlantica Desf.) trees on the second-order summary statistics of point pattern analysis in a part of Zagros woodlands, Iran. The spatial distribution of 431 wild pistachio trees was accurately mapped in a 40 ha stand in the Wild Pistachio & Almond Research Site, Fars province, Iran. Three commonly used second-order summary statistics (i.e., K-, L-, and g-functions) were applied to analyse their spatial pattern. The two-sample Kolmogorov-Smirnov goodness-of-fit test showed that the observed pattern significantly followed an inhomogeneous Poisson process null model in the study region. The results also showed that heterogeneous pattern of wild pistachio trees biased the homogeneous form of K-, L-, and g-functions, demonstrating a stronger aggregation of the trees at the scales of 0-50 m than actually existed and an aggregation at scales of 150-200 m, while regularly distributed. Consequently, we showed that heterogeneity of point patterns may bias the results of homogeneous second-order summary statistics and we also suggested applying inhomogeneous summary statistics with related null models for spatial pattern analysis of heterogeneous vegetations.

Interactions between toxic chemicals and natural environmental factors--a meta-analysis and case studies.

PubMed

Laskowski, Ryszard; Bednarska, Agnieszka J; Kramarz, Paulina E; Loureiro, Susana; Scheil, Volker; Kudłek, Joanna; Holmstrup, Martin

2010-08-15

The paper addresses problems arising from effects of natural environmental factors on toxicity of pollutants to organisms. Most studies on interactions between toxicants and natural factors, including those completed in the EU project NoMiracle (Novel Methods for Integrated Risk Assessment of Cumulative Stressors in Europe) described herein, showed that effects of toxic chemicals on organisms can differ vastly depending purely on external conditions. We compiled data from 61 studies on effects of temperature, moisture and dissolved oxygen on toxicity of a range of chemicals representing pesticides, polycyclic aromatic hydrocarbons, plant protection products of bacterial origin and trace metals. In 62.3% cases significant interactions (p< or =0.05 or less) between natural factors and chemicals were found, reaching 100% for the effect of dissolved oxygen on toxicity of waterborne chemicals. The meta-analysis of the 61 studies showed that the null hypothesis assuming no interactions between toxic chemicals and natural environmental factors should be rejected at p=2.7 x 10(-82) (truncated product method probability). In a few cases of more complex experimental designs, also second-order interactions were found, indicating that natural factors can modify interactions among chemicals. Such data emphasize the necessity of including information on natural factors and their variation in time and across geographic regions in ecological risk assessment. This can be done only if appropriate ecotoxicological test designs are used, in which test organisms are exposed to toxicants at a range of environmental conditions. We advocate designing such tests for the second-tier ecological risk assessment procedures. Copyright 2010 Elsevier B.V. All rights reserved.

Efficient and accurate time-stepping schemes for integrate-and-fire neuronal networks.

PubMed

Shelley, M J; Tao, L

2001-01-01

To avoid the numerical errors associated with resetting the potential following a spike in simulations of integrate-and-fire neuronal networks, Hansel et al. and Shelley independently developed a modified time-stepping method. Their particular scheme consists of second-order Runge-Kutta time-stepping, a linear interpolant to find spike times, and a recalibration of postspike potential using the spike times. Here we show analytically that such a scheme is second order, discuss the conditions under which efficient, higher-order algorithms can be constructed to treat resets, and develop a modified fourth-order scheme. To support our analysis, we simulate a system of integrate-and-fire conductance-based point neurons with all-to-all coupling. For six-digit accuracy, our modified Runge-Kutta fourth-order scheme needs a time-step of Delta(t) = 0.5 x 10(-3) seconds, whereas to achieve comparable accuracy using a recalibrated second-order or a first-order algorithm requires time-steps of 10(-5) seconds or 10(-9) seconds, respectively. Furthermore, since the cortico-cortical conductances in standard integrate-and-fire neuronal networks do not depend on the value of the membrane potential, we can attain fourth-order accuracy with computational costs normally associated with second-order schemes.

Fast smooth second-order sliding mode control for systems with additive colored noises.

PubMed

Yang, Pengfei; Fang, Yangwang; Wu, Youli; Liu, Yunxia; Zhang, Danxu

2017-01-01

In this paper, a fast smooth second-order sliding mode control is presented for a class of stochastic systems with enumerable Ornstein-Uhlenbeck colored noises. The finite-time mean-square practical stability and finite-time mean-square practical reachability are first introduced. Instead of treating the noise as bounded disturbance, the stochastic control techniques are incorporated into the design of the controller. The finite-time convergence of the prescribed sliding variable dynamics system is proved by using stochastic Lyapunov-like techniques. Then the proposed sliding mode controller is applied to a second-order nonlinear stochastic system. Simulation results are presented comparing with smooth second-order sliding mode control to validate the analysis.

Time domain reflectometry waveform analysis with second order bounded mean oscillation

USDA-ARS?s Scientific Manuscript database

Tangent-line methods and adaptive waveform interpretation with Gaussian filtering (AWIGF) have been proposed for determining reflection positions of time domain reflectometry (TDR) waveforms. However, the accuracy of those methods is limited for short probe TDR sensors. Second order bounded mean osc...

An integral-factorized implementation of the driven similarity renormalization group second-order multireference perturbation theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hannon, Kevin P.; Li, Chenyang; Evangelista, Francesco A., E-mail: francesco.evangelista@emory.edu

2016-05-28

We report an efficient implementation of a second-order multireference perturbation theory based on the driven similarity renormalization group (DSRG-MRPT2) [C. Li and F. A. Evangelista, J. Chem. Theory Comput. 11, 2097 (2015)]. Our implementation employs factorized two-electron integrals to avoid storage of large four-index intermediates. It also exploits the block structure of the reference density matrices to reduce the computational cost to that of second-order Møller–Plesset perturbation theory. Our new DSRG-MRPT2 implementation is benchmarked on ten naphthyne isomers using basis sets up to quintuple-ζ quality. We find that the singlet-triplet splittings (Δ{sub ST}) of the naphthyne isomers strongly depend onmore » the equilibrium structures. For a consistent set of geometries, the Δ{sub ST} values predicted by the DSRG-MRPT2 are in good agreements with those computed by the reduced multireference coupled cluster theory with singles, doubles, and perturbative triples.« less

A study of the kinetics and isotherms for Cr(VI) adsorption in a binary mixture of Cr(VI)-Ni(II) using hierarchical porous carbon obtained from pig bone.

PubMed

Li, Chengxian; Huang, Zhe; Huang, Bicheng; Liu, Changfeng; Li, Chengming; Huang, Yaqin

2014-01-01

Cr(VI) adsorption in a binary mixture Cr(VI)-Ni(II) using the hierarchical porous carbon prepared from pig bone (HPC) was investigated. The various factors affecting adsorption of Cr(VI) ions from aqueous solutions such as initial concentration, pH, temperature and contact time were analyzed. The results showed excellent efficiency of Cr(VI) adsorption by HPC. The kinetics and isotherms for Cr(VI) adsorption from a binary mixture Cr(VI)-Ni(II) by HPC were studied. The adsorption equilibrium described by the Langmuir isotherm model is better than that described by the Freundlich isotherm model for the binary mixture in this study. The maximum adsorption capacity was reliably found to be as high as 192.68 mg/g in the binary mixture at pH 2. On fitting the experimental data to both pseudo-first- and second-order equations, the regression analysis of the second-order equation gave a better R² value.

Partial least-squares with residual bilinearization for the spectrofluorimetric determination of pesticides. A solution of the problems of inner-filter effects and matrix interferents.

PubMed

Piccirilli, Gisela N; Escandar, Graciela M

2006-09-01

This paper demonstrates for the first time the power of a chemometric second-order algorithm for predicting, in a simple way and using spectrofluorimetric data, the concentration of analytes in the presence of both the inner-filter effect and unsuspected species. The simultaneous determination of the systemic fungicides carbendazim and thiabendazole was achieved and employed for the discussion of the scopes of the applied second-order chemometric tools: parallel factor analysis (PARAFAC) and partial least-squares with residual bilinearization (PLS/RBL). The chemometric study was performed using fluorescence excitation-emission matrices obtained after the extraction of the analytes over a C18-membrane surface. The ability of PLS/RBL to recognize and overcome the significant changes produced by thiabendazole in both the excitation and emission spectra of carbendazim is demonstrated. The high performance of the selected PLS/RBL method was established with the determination of both pesticides in artificial and real samples.

A note on the velocity derivative flatness factor in decaying HIT

NASA Astrophysics Data System (ADS)

Djenidi, L.; Danaila, L.; Antonia, R. A.; Tang, S.

2017-05-01

We develop an analytical expression for the velocity derivative flatness factor, F, in decaying homogenous and isotropic turbulence (HIT) starting with the transport equation of the third-order moment of the velocity increment and assuming self-preservation. This expression, fully consistent with the Navier-Stokes equations, relates F to the product between the second-order pressure derivative (∂2p /∂x2) and second-order moment of the longitudinal velocity derivative ((∂u/∂x ) 2), highlighting the role the pressure plays in the scaling of the fourth-order moment of the longitudinal velocity derivative. It is also shown that F has an upper bound which follows the integral of k*4Ep*(k* ) where Ep and k are the pressure spectrum and the wavenumber, respectively (the symbol * represents the Kolmogorov normalization). Direct numerical simulations of forced HIT suggest that this integral converges toward a constant as the Reynolds number increases.

Usage of K-cluster and factor analysis for grouping and evaluation the quality of olive oil in accordance with physico-chemical parameters

NASA Astrophysics Data System (ADS)

Milev, M.; Nikolova, Kr.; Ivanova, Ir.; Dobreva, M.

2015-11-01

25 olive oils were studied- different in origin and ways of extraction, in accordance with 17 physico-chemical parameters as follows: color parameters - a and b, light, fluorescence peaks, pigments - chlorophyll and β-carotene, fatty-acid content. The goals of the current study were: Conducting correlation analysis to find the inner relation between the studied indices; By applying factor analysis with the help of the method of Principal Components (PCA), to reduce the great number of variables into a few factors, which are of main importance for distinguishing the different types of olive oil;Using K-means cluster to compare and group the tested types olive oils based on their similarity. The inner relation between the studied indices was found by applying correlation analysis. A factor analysis using PCA was applied on the basis of the found correlation matrix. Thus the number of the studied indices was reduced to 4 factors, which explained 79.3% from the entire variation. The first one unified the color parameters, β-carotene and the related with oxidative products fluorescence peak - about 520 nm. The second one was determined mainly by the chlorophyll content and related to it fluorescence peak - about 670 nm. The third and the fourth factors were determined by the fatty-acid content of the samples. The third one unified the fatty-acids, which give us the opportunity to distinguish olive oil from the other plant oils - oleic, linoleic and stearin acids. The fourth factor included fatty-acids with relatively much lower content in the studied samples. It is enquired the number of clusters to be determined preliminary in order to apply the K-Cluster analysis. The variant K = 3 was worked out because the types of the olive oil were three. The first cluster unified all salad and pomace olive oils, the second unified the samples of extra virgin oilstaken as controls from producers, which were bought from the trade network. The third cluster unified samples from pomace and extra virgin oils, which distinguish one from another in accordance with their parameters from the natural olive oils, because of presence of plant oils impurities.

[Validation of the Questionnaire of Emotional Maladjustment and Adaptive Resources in Infertility (DERA)].

PubMed

Moreno-Rosset, Carmen; Antequera Jurado, Rosario; Jenaro Río, Cristina

2009-02-01

Validation of the Questionnaire of Emotional Maladjustment and Adaptive Resources in Infertility (DERA). Given the absence of measures to help psychologists working with infertile couples, this paper presents the process of developing a standardized measure to assess emotional maladjustment and adaptive resources in this population. A cross-sectional design was utilized to gather data from the assisted reproduction units of two public hospitals. Preliminary analyses were performed with a sample of 85 infertile patients. Psychometric properties of the measure were tested with a second sample of 490 infertile patients. Concerning reliability analyses, alpha indexes were adequate both for the measure and its factors. Concerning validity, second-order factor analysis yielded a four-factor solution that conjointly explains 56% of the total variance. Additional analyses with a third sample of 50 participants from the general population matched with a sample of 50 infertile participants were performed. In sum, this measure seems to be a useful psychological assessment tool to determine emotional adjustment, and individual, and interpersonal resources, for coping with infertility diagnosis and treatment.

The Laplace transformed divide-expand-consolidate resolution of the identity second-order Møller-Plesset perturbation (DEC-LT-RIMP2) theory method

NASA Astrophysics Data System (ADS)

Kjærgaard, Thomas

2017-01-01

The divide-expand-consolidate resolution of the identity second-order Møller-Plesset perturbation (DEC-RI-MP2) theory method introduced in Baudin et al. [J. Chem. Phys. 144, 054102 (2016)] is significantly improved by introducing the Laplace transform of the orbital energy denominator in order to construct the double amplitudes directly in the local basis. Furthermore, this paper introduces the auxiliary reduction procedure, which reduces the set of the auxiliary functions employed in the individual fragments. The resulting Laplace transformed divide-expand-consolidate resolution of the identity second-order Møller-Plesset perturbation method is applied to the insulin molecule where we obtain a factor 9.5 speedup compared to the DEC-RI-MP2 method.

Second-order variational equations for N-body simulations

NASA Astrophysics Data System (ADS)

Rein, Hanno; Tamayo, Daniel

2016-07-01

First-order variational equations are widely used in N-body simulations to study how nearby trajectories diverge from one another. These allow for efficient and reliable determinations of chaos indicators such as the Maximal Lyapunov characteristic Exponent (MLE) and the Mean Exponential Growth factor of Nearby Orbits (MEGNO). In this paper we lay out the theoretical framework to extend the idea of variational equations to higher order. We explicitly derive the differential equations that govern the evolution of second-order variations in the N-body problem. Going to second order opens the door to new applications, including optimization algorithms that require the first and second derivatives of the solution, like the classical Newton's method. Typically, these methods have faster convergence rates than derivative-free methods. Derivatives are also required for Riemann manifold Langevin and Hamiltonian Monte Carlo methods which provide significantly shorter correlation times than standard methods. Such improved optimization methods can be applied to anything from radial-velocity/transit-timing-variation fitting to spacecraft trajectory optimization to asteroid deflection. We provide an implementation of first- and second-order variational equations for the publicly available REBOUND integrator package. Our implementation allows the simultaneous integration of any number of first- and second-order variational equations with the high-accuracy IAS15 integrator. We also provide routines to generate consistent and accurate initial conditions without the need for finite differencing.

Deception and false belief in paranoia: modelling theory of mind stories.

PubMed

Shryane, Nick M; Corcoran, Rhiannon; Rowse, Georgina; Moore, Rosanne; Cummins, Sinead; Blackwood, Nigel; Howard, Robert; Bentall, Richard P

2008-01-01

This study used Item Response Theory (IRT) to model the psychometric properties of a Theory of Mind (ToM) stories task. The study also aimed to determine whether the ability to understand states of false belief in others and the ability to understand another's intention to deceive are separable skills, and to establish which is more sensitive to the presence of paranoia. A large and diverse clinical and nonclinical sample differing in levels of depression and paranoid ideation performed a ToM stories task measuring false belief and deception at first and second order. A three-factor IRT model was found to best fit the data, consisting of first- and second-order deception factors and a single false-belief factor. The first-order deception and false-belief factors had good measurement properties at low trait levels, appropriate for samples with reduced ToM ability. First-order deception and false beliefs were both sensitive to paranoid ideation with IQ predicting performance on false belief items. Separable abilities were found to underlie performance on verbal ToM tasks. However, paranoia was associated with impaired performance on both false belief and deception understanding with clear impairment at the simplest level of mental state attribution.

Two-D results on human operator perception

NASA Technical Reports Server (NTRS)

Siapkara, A. A.; Sheridan, T. B.

1981-01-01

The application of multidimensional scaling methodology in human factors engineering is presented. The nonorthogonality of internally perceived task variables is exhibited for first and second order plants with both dependent and independent task variables. Directions of operator preference are shown for actual performance, pilot opinion rating, and subjective measures of fatigue, adaptability, and system recognition. Improvement of performance in second order systems is exhibited by the use of bang-bang feedback information. Dissimilarity measures for system comparison are suggested in order to account for human operator rotations and subjective sense of time.

Confirmatory Factor Analysis of the Behavior Rating Inventory of Executive Function-Adult Version in Healthy Adults and Application to Attention-Deficit/Hyperactivity Disorder

PubMed Central

Roth, Robert M.; Lance, Charles E.; Isquith, Peter K.; Fischer, Adina S.; Giancola, Peter R.

2013-01-01

The Behavior Rating Inventory of Executive Function-Adult Version (BRIEF-A) is a questionnaire measure designed to assess executive functioning in everyday life. Analysis of data from the BRIEF-A standardization sample yielded a two-factor solution (labeled Behavioral Regulation and Metacognition). The present investigation employed confirmatory factor analysis (CFA) to evaluate four alternative models of the factor structure of the BRIEF-A self-report form in a sample of 524 healthy young adults. Results indicated that a three-factor model best fits the data: a Metacognition factor, a Behavioral Regulation factor consisting of the Inhibit and Self-Monitor scales, and an Emotional Regulation factor composed of the Emotional Control and Shift scales. The three factors contributed 14%, 19%, and 24% of unique variance to the model, respectively, and a second-order general factor accounted for 41% of variance overall. This three-factor solution is consistent with recent CFAs of the Parent report form of the BRIEF. Furthermore, although the Behavioral Regulation factor score in the two-factor model did not differ between adults with attention-deficit/hyperactivity disorder and a matched healthy comparison group, greater impairment on the Behavioral Regulation factor but not the Emotional Regulation factor was found using the three-factor model. Together, these findings support the multidimensional nature of executive function and the clinical relevance of a three-factor model of the BRIEF-A. PMID:23676185

Leading people positively: cross-cultural validation of the Servant Leadership Survey (SLS).

PubMed

Rodríguez-Carvajal, Raquel; de Rivas, Sara; Herrero, Marta; Moreno-Jiménez, Bernardo; van Dierendonck, Dirk

2014-10-24

Servant Leadership emphasizes employee's development and growth within a context of moral and social concern. Nowadays, this management change towards workers´ wellbeing is highlighted as an important issue. The aims of this paper are to adapt to Spanish speakers the Servant Leadership Survey (SLS) by van Dierendonck and Nuijten (2011), and to analyze its factorial validity through confirmatory factor analysis and measurement invariance in three countries. A sample of 638 working people from three Spanish-speaking countries (Spain, Argentina and Mexico) participated in the study. In all three countries, confirmatory factor analyses corroborate the eight factor structure (empowerment, accountability, standing back, humility, authenticity, courage, forgiveness and stewardship) with one second order factor (servant leadership) (in all three samples, CFI, IFI > .92, TLI > .91, RMSEA < .70). Also, factor loadings, reliability and convergent validity were acceptable across samples. Furthermore, through measurement invariance analysis, we detected model equivalence in all three countries including structural residual invariance (ΔCFI = .001). Finally, cultural differences in some dimensions were found and discussed, opening the way for future cross-cultural studies.

Measuring Health-Related Quality of Life of HIV-Positive Adolescents in Resource-Constrained Settings

PubMed Central

Masquillier, Caroline; Wouters, Edwin; Loos, Jasna; Nöstlinger, Christiana

2012-01-01

Background and Objectives Access to antiretroviral treatment among adolescents living with HIV (ALH) is increasing. Health-related quality of life (HRQOL) is relevant for monitoring the impact of the disease on both well-being and treatment outcomes. However, adequate screening tools to assess HRQOL in low-resource settings are scarce. This study aims to fill this research gap, by 1) assessing the psychometric properties and reliability of an Eastern African English version of a European HRQOL scale for adolescents (KIDSCREEN) and 2) determining which version of the KIDSCREEN (52-, 27- and 10-item version) is most suitable for low-resource settings. Methods The KIDSCREEN was translated into Eastern African English, Luganda (Uganda) and Dholuo (Kenya) according to standard procedures. The reconciled version was administered in 2011 to ALH aged 13–17 in Kenya (n = 283) and Uganda (n = 299). All three KIDSCREEN versions were fitted to the data with confirmatory factor analysis (CFA). After comparison, the most suitable version was adapted based on the CFA outcomes utilizing the results of previous formative research. In order to develop a general HRQOL factor, a second-order measurement model was fitted to the data. Results The CFA results showed that without adjustments, the KIDSCREEN cannot be used for measuring the HRQOL of HIV-positive adolescents. After comparison, the most suitable version for low-resource settings - the 27-item version - was adapted further. The introduction of a negative wording factor was required for the Dholuo model. The Dholuo (CFI: 0.93; RMSEA: 0.039) and the Luganda model (CFI: 0.90; RMSEA: 0.052) showed a good fit. All cronbach’s alphas of the factors were 0.70 or above. The alpha value of the Dholuo and Lugandan HRQOL second-order factor was respectively 0.84 and 0.87. Conclusions The study showed that the adapted KIDSCREEN-27 is an adequate tool for measuring HRQOL in low-resource settings with high HIV prevalence. PMID:22815776

On the Lighthill relationship and sound generation from isotropic turbulence

NASA Technical Reports Server (NTRS)

Zhou, YE; Praskovsky, Alexander; Oncley, Steven

1994-01-01

In 1952, Lighthill developed a theory for determining the sound generated by a turbulent motion of a fluid. With some statistical assumptions, Proudman applied this theory to estimate the acoustic power of isotropic turbulence. Recently, Lighthill established a simple relationship that relates the fourth-order retarded time and space covariance of his stress tensor to the corresponding second-order covariance and the turbulent flatness factor, without making statistical assumptions for a homogeneous turbulence. Lilley revisited Proudman's work and applied the Lighthill relationship to evaluate directly the radiated acoustic power from isotropic turbulence. After choosing the time separation dependence in the two-point velocity time and space covariance based on the insights gained from direct numerical simulations, Lilley concluded that the Proudman constant is determined by the turbulent flatness factor and the second-order spatial velocity covariance. In order to estimate the Proudman constant at high Reynolds numbers, we analyzed a unique data set of measurements in a large wind tunnel and atmospheric surface layer that covers a range of the Taylor microscale based on Reynolds numbers 2.0 x 10(exp 3) less than or equal to R(sub lambda) less than or equal to 12.7 x 10(exp 3). Our measurements demonstrate that the Lighthill relationship is a good approximation, providing additional support to Lilley's approach. The flatness factor is found between 2.7 - 3.3 and the second order spatial velocity covariance is obtained. Based on these experimental data, the Proudman constant is estimated to be 0.68 - 3.68.

Effects of Second-Order Hydrodynamics on a Semisubmersible Floating Offshore Wind Turbine: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayati, I.; Jonkman, J.; Robertson, A.

2014-07-01

The objective of this paper is to assess the second-order hydrodynamic effects on a semisubmersible floating offshore wind turbine. Second-order hydrodynamics induce loads and motions at the sum- and difference-frequencies of the incident waves. These effects have often been ignored in offshore wind analysis, under the assumption that they are significantly smaller than first-order effects. The sum- and difference-frequency loads can, however, excite eigenfrequencies of the system, leading to large oscillations that strain the mooring system or vibrations that cause fatigue damage to the structure. Observations of supposed second-order responses in wave-tank tests performed by the DeepCwind consortium at themore » MARIN offshore basin suggest that these effects might be more important than originally expected. These observations inspired interest in investigating how second-order excitation affects floating offshore wind turbines and whether second-order hydrodynamics should be included in offshore wind simulation tools like FAST in the future. In this work, the effects of second-order hydrodynamics on a floating semisubmersible offshore wind turbine are investigated. Because FAST is currently unable to account for second-order effects, a method to assess these effects was applied in which linearized properties of the floating wind system derived from FAST (including the 6x6 mass and stiffness matrices) are used by WAMIT to solve the first- and second-order hydrodynamics problems in the frequency domain. The method has been applied to the OC4-DeepCwind semisubmersible platform, supporting the NREL 5-MW baseline wind turbine. The loads and response of the system due to the second-order hydrodynamics are analysed and compared to first-order hydrodynamic loads and induced motions in the frequency domain. Further, the second-order loads and induced response data are compared to the loads and motions induced by aerodynamic loading as solved by FAST.« less

Determination of important topographic factors for landslide mapping analysis using MLP network.

PubMed

Alkhasawneh, Mutasem Sh; Ngah, Umi Kalthum; Tay, Lea Tien; Mat Isa, Nor Ashidi; Al-batah, Mohammad Subhi

2013-01-01

Landslide is one of the natural disasters that occur in Malaysia. Topographic factors such as elevation, slope angle, slope aspect, general curvature, plan curvature, and profile curvature are considered as the main causes of landslides. In order to determine the dominant topographic factors in landslide mapping analysis, a study was conducted and presented in this paper. There are three main stages involved in this study. The first stage is the extraction of extra topographic factors. Previous landslide studies had identified mainly six topographic factors. Seven new additional factors have been proposed in this study. They are longitude curvature, tangential curvature, cross section curvature, surface area, diagonal line length, surface roughness, and rugosity. The second stage is the specification of the weight of each factor using two methods. The methods are multilayer perceptron (MLP) network classification accuracy and Zhou's algorithm. At the third stage, the factors with higher weights were used to improve the MLP performance. Out of the thirteen factors, eight factors were considered as important factors, which are surface area, longitude curvature, diagonal length, slope angle, elevation, slope aspect, rugosity, and profile curvature. The classification accuracy of multilayer perceptron neural network has increased by 3% after the elimination of five less important factors.

Determination of Important Topographic Factors for Landslide Mapping Analysis Using MLP Network

PubMed Central

Alkhasawneh, Mutasem Sh.; Ngah, Umi Kalthum; Mat Isa, Nor Ashidi; Al-batah, Mohammad Subhi

2013-01-01

Landslide is one of the natural disasters that occur in Malaysia. Topographic factors such as elevation, slope angle, slope aspect, general curvature, plan curvature, and profile curvature are considered as the main causes of landslides. In order to determine the dominant topographic factors in landslide mapping analysis, a study was conducted and presented in this paper. There are three main stages involved in this study. The first stage is the extraction of extra topographic factors. Previous landslide studies had identified mainly six topographic factors. Seven new additional factors have been proposed in this study. They are longitude curvature, tangential curvature, cross section curvature, surface area, diagonal line length, surface roughness, and rugosity. The second stage is the specification of the weight of each factor using two methods. The methods are multilayer perceptron (MLP) network classification accuracy and Zhou's algorithm. At the third stage, the factors with higher weights were used to improve the MLP performance. Out of the thirteen factors, eight factors were considered as important factors, which are surface area, longitude curvature, diagonal length, slope angle, elevation, slope aspect, rugosity, and profile curvature. The classification accuracy of multilayer perceptron neural network has increased by 3% after the elimination of five less important factors. PMID:24453846

Fast smooth second-order sliding mode control for stochastic systems with enumerable coloured noises

NASA Astrophysics Data System (ADS)

Yang, Peng-fei; Fang, Yang-wang; Wu, You-li; Zhang, Dan-xu; Xu, Yang

2018-01-01

A fast smooth second-order sliding mode control is presented for a class of stochastic systems driven by enumerable Ornstein-Uhlenbeck coloured noises with time-varying coefficients. Instead of treating the noise as bounded disturbance, the stochastic control techniques are incorporated into the design of the control. The finite-time mean-square practical stability and finite-time mean-square practical reachability are first introduced. Then the prescribed sliding variable dynamic is presented. The sufficient condition guaranteeing its finite-time convergence is given and proved using stochastic Lyapunov-like techniques. The proposed sliding mode controller is applied to a second-order nonlinear stochastic system. Simulation results are given comparing with smooth second-order sliding mode control to validate the analysis.

Optimization of thiamethoxam adsorption parameters using multi-walled carbon nanotubes by means of fractional factorial design.

PubMed

Panić, Sanja; Rakić, Dušan; Guzsvány, Valéria; Kiss, Erne; Boskovic, Goran; Kónya, Zoltán; Kukovecz, Ákos

2015-12-01

The aim of this work was to evaluate significant factors affecting the thiamethoxam adsorption efficiency using oxidized multi-walled carbon nanotubes (MWCNTs) as adsorbents. Five factors (initial solution concentration of thiamethoxam in water, temperature, solution pH, MWCNTs weight and contact time) were investigated using 2V(5-1) fractional factorial design. The obtained linear model was statistically tested using analysis of variance (ANOVA) and the analysis of residuals was used to investigate the model validity. It was observed that the factors and their second-order interactions affecting the thiamethoxam removal can be divided into three groups: very important, moderately important and insignificant ones. The initial solution concentration was found to be the most influencing parameter on thiamethoxam adsorption from water. Optimization of the factors levels was carried out by minimizing those parameters which are usually critical in real life: the temperature (energy), contact time (money) and weight of MWCNTs (potential health hazard), in order to maximize the adsorbed amount of the pollutant. The results of maximal adsorbed thiamethoxam amount in both real and optimized experiments indicate that among minimized parameters the adsorption time is one that makes the largest difference. The results of this study indicate that fractional factorial design is very useful tool for screening the higher number of parameters and reducing the number of adsorption experiments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Physical analysis and second-order modelling of an unsteady turbulent flow - The oscillating boundary layer on a flat plate

NASA Technical Reports Server (NTRS)

Ha Minh, H.; Viegas, J. R.; Rubesin, M. W.; Spalart, P.; Vandromme, D. D.

1989-01-01

The turbulent boundary layer under a freestream whose velocity varies sinusoidally in time around a zero mean is computed using two second order turbulence closure models. The time or phase dependent behavior of the Reynolds stresses are analyzed and results are compared to those of a previous SPALART-BALDWIN direct simulation. Comparisons show that the second order modeling is quite satisfactory for almost all phase angles, except in the relaminarization period where the computations lead to a relatively high wall shear stress.

Studies on Thorium Adsorption Characteristics upon Activated Titanium Hydroxide Prepared from Rosetta Ilmenite Concentrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gado, M, E-mail: parq28@yahoo.com; Zaki, S

2016-01-01

The titanium hydroxide prepared from Rosetta ilmenite concentrate has been applied for Th (IV) adsorption from its acid aqueous solutions. The prepared hydroxide is first characterized by both Fourier transform infrared (FT-IR) spectrum and thermogravimetric analysis. The relevant factors affecting the adsorption process have been studied. The obtained equilibrium data fits well with the Langmuir isotherm rather than Freundlich isotherm, while the adsorption kinetic data follow the pseudo-second order model. The different thermodynamic parameters have also been calculated and indicate that the adsorption process is spontaneous.

Patterns and Associated Factors of Caesarean Delivery Intention among Expectant Mothers in China: Implications from the Implementation of China’s New National Two-Child Policy

PubMed Central

Wang, Lianlian; Xu, Xianglong; Baker, Philip; Tong, Chao; Zhang, Lei; Qi, Hongbo; Zhao, Yong

2016-01-01

Objective: This study explores the basic demographic characteristics of expectant mothers in the context of their intentions regarding mode of delivery, in particular, the preference for caesarean delivery, and analyzes the social and psychological factors that influence delivery preference. Method: A cross-sectional survey of pregnant women was conducted during June to August in 2015. This study adopted a stratified sampling method, and 16 representative hospitals in five provinces of China were included. Results: 1755 and 590 of expectant mothers in their first and second pregnancies, respectively, were enrolled in this study. 354 (15.10%) intended to deliver by caesarean section and 585 (24.95%) participants were uncertain prior to delivery. 156 (8.89%) of expectant mothers in their first pregnancy and 198 (33.56%) expectant mothers in their second pregnancy intended to deliver by caesarean section. Ordinal logistic regression analysis found that nationality, parity, trimester of pregnancy, and advanced maternal age were factors associated with intention to deliver by caesarean (ordered logistic regression/three-level caesarean delivery intention criterion; odds ratios p < 0.05). Conclusions: 8.89% of first pregnancy expectant mothers and 33.56% of second pregnancy expectant mothers intended to deliver by caesarean section. Any intervention program to reduce the rate of Caesarean delivery should focus on the Han population, older pregnant women, and expectant mothers in their second pregnancy, at an early gestation. PMID:27399752

A social cybernetic analysis of simulation-based, remotely delivered medical skills training in an austere environment: developing a test bed for spaceflight medicine.

PubMed

Musson, David M; Doyle, Thomas E

2012-01-01

This paper describes analysis of medical skills training exercises that were conducted at an arctic research station. These were conducted as part of an ongoing effort to establish high fidelity medical simulation test bed capabilities in remote and extreme "space analogue" environments for the purpose studying medical care in spaceflight. The methodological orientation followed by the authors is that of "second order cybernetics," or the science of studying human systems where the observer is involved within the system in question. Analyses presented include the identification of three distinct phases of the training activity, and two distinct levels of work groups-- termed "first-order teams" and "second-order teams." Depending on the phase of activity, first-order and second-order teams are identified, each having it own unique structure, composition, communications, goals, and challenges. Several specific teams are highlighted as case examples. Limitations of this approach are discussed, as are potential benefits to ongoing and planned research activity in this area.

Time-dependent Second Order Scattering Theory for Weather Radar with a Finite Beam Width

NASA Technical Reports Server (NTRS)

Kobayashi, Satoru; Tanelli, Simone; Im, Eastwood; Ito, Shigeo; Oguchi, Tomohiro

2006-01-01

Multiple scattering effects from spherical water particles of uniform diameter are studied for a W-band pulsed radar. The Gaussian transverse beam-profile and the rectangular pulse-duration are used for calculation. An second-order analytical solution is derived for a single layer structure, based on a time-dependent radiative transfer theory as described in the authors' companion paper. When the range resolution is fixed, increase in footprint radius leads to increase in the second order reflectivity that is defined as the ratio of the second order return to the first order one. This feature becomes more serious as the range increases. Since the spaceborne millimeter-wavelength radar has a large footprint radius that is competitive to the mean free path, the multiple scattering effect must be taken into account for analysis.

Subscale and Full-Scale Testing of Buckling-Critical Launch Vehicle Shell Structures

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Haynie, Waddy T.; Lovejoy, Andrew E.; Roberts, Michael G.; Norris, Jeffery P.; Waters, W. Allen; Herring, Helen M.

2012-01-01

New analysis-based shell buckling design factors (aka knockdown factors), along with associated design and analysis technologies, are being developed by NASA for the design of launch vehicle structures. Preliminary design studies indicate that implementation of these new knockdown factors can enable significant reductions in mass and mass-growth in these vehicles and can help mitigate some of NASA s launch vehicle development and performance risks by reducing the reliance on testing, providing high-fidelity estimates of structural performance, reliability, robustness, and enable increased payload capability. However, in order to validate any new analysis-based design data or methods, a series of carefully designed and executed structural tests are required at both the subscale and full-scale level. This paper describes recent buckling test efforts at NASA on two different orthogrid-stiffened metallic cylindrical shell test articles. One of the test articles was an 8-ft-diameter orthogrid-stiffened cylinder and was subjected to an axial compression load. The second test article was a 27.5-ft-diameter Space Shuttle External Tank-derived cylinder and was subjected to combined internal pressure and axial compression.

Control order and visuomotor strategy development for joystick-steered underground shuttle cars.

PubMed

Cloete, Steven; Zupanc, Christine; Burgess-Limerick, Robin; Wallis, Guy

2014-09-01

In this simulator-based study, we aimed to quantify performance differences between joystick steering systems using first-order and second-order control, which are used in underground coal mining shuttle cars. In addition, we conducted an exploratory analysis of how users of the more difficult, second-order system changed their behavior over time. Evidence from the visuomotor control literature suggests that higher-order control devices are not intuitive, which could pose a significant risk to underground mine personnel, equipment, and infrastructure. Thirty-six naive participants were randomly assigned to first- and second-order conditions and completed three experimental trials comprising sequences of 90 degrees turns in a virtual underground mine environment, with velocity held constant at 9 km/h(-1). Performance measures were lateral deviation, steering angle variability, high-frequency steering content, joystick activity, and cumulative time in collision with the virtual mine wall. The second-order control group exhibited significantly poorer performance for all outcome measures. In addition, a series of correlation analyses revealed that changes in strategy were evident in the second-order group but not the first-order group. Results were consistent with previous literature indicating poorer performance with higher-order control devices and caution against the adoption of the second-order joystick system for underground shuttle cars. Low-cost, portable simulation platforms may provide an effective basis for operator training and recruitment.

Second-order data obtained by beta-cyclodextrin complexes: a novel approach for multicomponent analysis with three-way multivariate calibration methods.

PubMed

Khani, Rouhollah; Ghasemi, Jahan B; Shemirani, Farzaneh

2014-10-01

This research reports the first application of β-cyclodextrin (β-CD) complexes as a new method for generation of three way data, combined with second-order calibration methods for quantification of a binary mixture of caffeic (CA) and vanillic (VA) acids, as model compounds in fruit juices samples. At first, the basic experimental parameters affecting the formation of inclusion complexes between target analytes and β-CD were investigated and optimized. Then under the optimum conditions, parallel factor analysis (PARAFAC) and bilinear least squares/residual bilinearization (BLLS/RBL) were applied for deconvolution of trilinear data to get spectral and concentration profiles of CA and VA as a function of β-CD concentrations. Due to severe concentration profile overlapping between CA and VA in β-CD concentration dimension, PARAFAC could not be successfully applied to the studied samples. So, BLLS/RBL performed better than PARAFAC. The resolution of the model compounds was possible due to differences in the spectral absorbance changes of the β-CD complexes signals of the investigated analytes, opening a new approach for second-order data generation. The proposed method was validated by comparison with a reference method based on high-performance liquid chromatography photodiode array detection (HPLC-PDA), and no significant differences were found between the reference values and the ones obtained with the proposed method. Such a chemometrics-based protocol may be a very promising tool for more analytical applications in real samples monitoring, due to its advantages of simplicity, rapidity, accuracy, sufficient spectral resolution and concentration prediction even in the presence of unknown interferents. Copyright © 2014 Elsevier B.V. All rights reserved.

Word Order Processing in a Second Language: From VO to OV

ERIC Educational Resources Information Center

Erdocia, Kepa; Zawiszewski, Adam; Laka, Itziar

2014-01-01

Event-related potential studies on second language processing reveal that L1/L2 differences are due either to proficiency, age of acquisition or grammatical differences between L1 and L2 (Kotz in "Brain Lang" 109(2-3):68-74, 2009). However, the relative impact of these and other factors in second language processing is still not well…

Investigation of air transportation technology at Ohio University, 1980. [general aviation aircraft and navigation aids

NASA Technical Reports Server (NTRS)

Mcfarland, R. H.

1981-01-01

Specific configurations of first and second order all digital phase locked loops were analyzed for both ideal and additive gaussian noise inputs. In addition, a design for a hardware digital phase locked loop capable of either first or second order operation was evaluated along with appropriate experimental data obtained from testing of the hardware loop. All parameters chosen for the analysis and the design of the digital phase locked loop were consistent with an application to an Omega navigation receiver although neither the analysis nor the design are limited to this application. For all cases tested, the experimental data showed close agreement with the analytical results indicating that the Markov chain model for first and second order digital phase locked loops are valid.

Optimum extrusion-cooking conditions for improving physical properties of fish-cereal based snacks by response surface methodology.

PubMed

Singh, R K Ratankumar; Majumdar, Ranendra K; Venkateshwarlu, G

2014-09-01

To establish the effect of barrel temperature, screw speed, total moisture and fish flour content on the expansion ratio and bulk density of the fish based extrudates, response surface methodology was adopted in this study. The experiments were optimized using five-levels, four factors central composite design. Analysis of Variance was carried to study the effects of main factors and interaction effects of various factors and regression analysis was carried out to explain the variability. The fitting was done to a second order model with the coded variables for each response. The response surface plots were developed as a function of two independent variables while keeping the other two independent variables at optimal values. Based on the ANOVA, the fitted model confirmed the model fitness for both the dependent variables. Organoleptically highest score was obtained with the combination of temperature-110(0) C, screw speed-480 rpm, moisture-18 % and fish flour-20 %.

Factorial analysis of trihalomethanes formation in drinking water.

PubMed

Chowdhury, Shakhawat; Champagne, Pascale; McLellan, P James

2010-06-01

Disinfection of drinking water reduces pathogenic infection, but may pose risks to human health through the formation of disinfection byproducts. The effects of different factors on the formation of trihalomethanes were investigated using a statistically designed experimental program, and a predictive model for trihalomethanes formation was developed. Synthetic water samples with different factor levels were produced, and trihalomethanes concentrations were measured. A replicated fractional factorial design with center points was performed, and significant factors were identified through statistical analysis. A second-order trihalomethanes formation model was developed from 92 experiments, and the statistical adequacy was assessed through appropriate diagnostics. This model was validated using additional data from the Drinking Water Surveillance Program database and was applied to the Smiths Falls water supply system in Ontario, Canada. The model predictions were correlated strongly to the measured trihalomethanes, with correlations of 0.95 and 0.91, respectively. The resulting model can assist in analyzing risk-cost tradeoffs in the design and operation of water supply systems.

Order of accuracy of QUICK and related convection-diffusion schemes

NASA Technical Reports Server (NTRS)

Leonard, B. P.

1993-01-01

This report attempts to correct some misunderstandings that have appeared in the literature concerning the order of accuracy of the QUICK scheme for steady-state convective modeling. Other related convection-diffusion schemes are also considered. The original one-dimensional QUICK scheme written in terms of nodal-point values of the convected variable (with a 1/8-factor multiplying the 'curvature' term) is indeed a third-order representation of the finite volume formulation of the convection operator average across the control volume, written naturally in flux-difference form. An alternative single-point upwind difference scheme (SPUDS) using node values (with a 1/6-factor) is a third-order representation of the finite difference single-point formulation; this can be written in a pseudo-flux difference form. These are both third-order convection schemes; however, the QUICK finite volume convection operator is 33 percent more accurate than the single-point implementation of SPUDS. Another finite volume scheme, writing convective fluxes in terms of cell-average values, requires a 1/6-factor for third-order accuracy. For completeness, one can also write a single-point formulation of the convective derivative in terms of cell averages, and then express this in pseudo-flux difference form; for third-order accuracy, this requires a curvature factor of 5/24. Diffusion operators are also considered in both single-point and finite volume formulations. Finite volume formulations are found to be significantly more accurate. For example, classical second-order central differencing for the second derivative is exactly twice as accurate in a finite volume formulation as it is in single-point.

Fuzzy interval Finite Element/Statistical Energy Analysis for mid-frequency analysis of built-up systems with mixed fuzzy and interval parameters

NASA Astrophysics Data System (ADS)

Yin, Hui; Yu, Dejie; Yin, Shengwen; Xia, Baizhan

2016-10-01

This paper introduces mixed fuzzy and interval parametric uncertainties into the FE components of the hybrid Finite Element/Statistical Energy Analysis (FE/SEA) model for mid-frequency analysis of built-up systems, thus an uncertain ensemble combining non-parametric with mixed fuzzy and interval parametric uncertainties comes into being. A fuzzy interval Finite Element/Statistical Energy Analysis (FIFE/SEA) framework is proposed to obtain the uncertain responses of built-up systems, which are described as intervals with fuzzy bounds, termed as fuzzy-bounded intervals (FBIs) in this paper. Based on the level-cut technique, a first-order fuzzy interval perturbation FE/SEA (FFIPFE/SEA) and a second-order fuzzy interval perturbation FE/SEA method (SFIPFE/SEA) are developed to handle the mixed parametric uncertainties efficiently. FFIPFE/SEA approximates the response functions by the first-order Taylor series, while SFIPFE/SEA improves the accuracy by considering the second-order items of Taylor series, in which all the mixed second-order items are neglected. To further improve the accuracy, a Chebyshev fuzzy interval method (CFIM) is proposed, in which the Chebyshev polynomials is used to approximate the response functions. The FBIs are eventually reconstructed by assembling the extrema solutions at all cut levels. Numerical results on two built-up systems verify the effectiveness of the proposed methods.

Second-order shaped pulsed for solid-state quantum computation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sengupta, Pinaki

2008-01-01

We present the construction and detailed analysis of highly optimized self-refocusing pulse shapes for several rotation angles. We characterize the constructed pulses by the coefficients appearing in the Magnus expansion up to second order. This allows a semianalytical analysis of the performance of the constructed shapes in sequences and composite pulses by computing the corresponding leading-order error operators. Higher orders can be analyzed with the numerical technique suggested by us previously. We illustrate the technique by analyzing several composite pulses designed to protect against pulse amplitude errors, and on decoupling sequences for potentially long chains of qubits with on-site andmore » nearest-neighbor couplings.« less

Performance ratings and personality factors in radar controllers.

DOT National Transportation Integrated Search

1970-09-01

The purpose of the study was to determine whether primary or second-order personality questionnaire factors were related to job performance ratings on the Employee Appraisal Record in a sample of 264 radar controllers. A Pearson correlation matrix wa...

Conditions for l =1 Pomeranchuk instability in a Fermi liquid

NASA Astrophysics Data System (ADS)

Wu, Yi-Ming; Klein, Avraham; Chubukov, Andrey V.

2018-04-01

We perform a microscopic analysis of how the constraints imposed by conservation laws affect q =0 Pomeranchuk instabilities in a Fermi liquid. The conventional view is that these instabilities are determined by the static interaction between low-energy quasiparticles near the Fermi surface, in the limit of vanishing momentum transfer q . The condition for a Pomeranchuk instability is set by Flc (s )=-1 , where Flc (s ) (a Landau parameter) is a properly normalized partial component of the antisymmetrized static interaction F (k ,k +q ;p ,p -q ) in a charge (c) or spin (s) subchannel with angular momentum l . However, it is known that conservation laws for total spin and charge prevent Pomeranchuk instabilities for l =1 spin- and charge-current order parameters. Our study aims to understand whether this holds only for these special forms of l =1 order parameters or is a more generic result. To this end we perform a diagrammatic analysis of spin and charge susceptibilities for charge and spin density order parameters, as well as perturbative calculations to second order in the Hubbard U . We argue that for l =1 spin-current and charge-current order parameters, certain vertex functions, which are determined by high-energy fermions, vanish at Fl=1 c (s )=-1 , preventing a Pomeranchuk instability from taking place. For an order parameter with a generic l =1 form factor, the vertex function is not expressed in terms of Fl=1 c (s ), and a Pomeranchuk instability may occur when F1c (s )=-1 . We argue that for other values of l , a Pomeranchuk instability may occur at Flc (s )=-1 for an order parameter with any form factor.

Transient analysis of an adaptive system for optimization of design parameters

NASA Technical Reports Server (NTRS)

Bayard, D. S.

1992-01-01

Averaging methods are applied to analyzing and optimizing the transient response associated with the direct adaptive control of an oscillatory second-order minimum-phase system. The analytical design methods developed for a second-order plant can be applied with some approximation to a MIMO flexible structure having a single dominant mode.

Generalized Second-Order Partial Derivatives of 1/r

ERIC Educational Resources Information Center

Hnizdo, V.

2011-01-01

The generalized second-order partial derivatives of 1/r, where r is the radial distance in three dimensions (3D), are obtained using a result of the potential theory of classical analysis. Some non-spherical-regularization alternatives to the standard spherical-regularization expression for the derivatives are derived. The utility of a…

The New Epistemology and the Milan Approach: Feminist and Sociopolitical Considerations.

ERIC Educational Resources Information Center

MacKinnon, Laurie Katherine; Miller, Dusty

1987-01-01

Explores the sociopolitical implications of the new epistemology and the Milan approach, concluding that, while second order cybernetics has greater potential to incorporate a radical social analysis, it has, nevertheless, failed to do so. The application of second order cybernetics in family therapy appears to be constrained by the sociopolitical…

Psychometric properties of the Survey of Personal Beliefs: a rational-emotive measure of irrational thinking.

PubMed

Demaria, T P; Kassinove, H; Dill, C A

1989-01-01

A test consistency and confirmatory factor analyses were performed on the Survey of Personal Beliefs, a new measure of irrational thinking based on rational-emotive personality theory. The survey, which was logically derived, includes a general rationality factor and subscales measuring five hypothesized core categories of irrational beliefs. Subjects included a nonclinical sample of 130 men and 150 women, with a mean age of 46. Results indicated that the Survey of Personal Beliefs had satisfactory total and scale reliability. The confirmatory analyses supported a higher order factor model including 5 first-order factors ( awfulizing, self-directed shoulds, other-directed shoulds, low frustration tolerance, and self-worth) and 1 second-order or general factor.

A single-loop optimization method for reliability analysis with second order uncertainty

NASA Astrophysics Data System (ADS)

Xie, Shaojun; Pan, Baisong; Du, Xiaoping

2015-08-01

Reliability analysis may involve random variables and interval variables. In addition, some of the random variables may have interval distribution parameters owing to limited information. This kind of uncertainty is called second order uncertainty. This article develops an efficient reliability method for problems involving the three aforementioned types of uncertain input variables. The analysis produces the maximum and minimum reliability and is computationally demanding because two loops are needed: a reliability analysis loop with respect to random variables and an interval analysis loop for extreme responses with respect to interval variables. The first order reliability method and nonlinear optimization are used for the two loops, respectively. For computational efficiency, the two loops are combined into a single loop by treating the Karush-Kuhn-Tucker (KKT) optimal conditions of the interval analysis as constraints. Three examples are presented to demonstrate the proposed method.

A prospective examination of the path from child abuse and neglect to illicit drug use in middle adulthood: the potential mediating role of four risk factors.

PubMed

Wilson, Helen W; Widom, Cathy Spatz

2009-03-01

This study examines prostitution, homelessness, delinquency and crime, and school problems as potential mediators of the relationship between childhood abuse and neglect (CAN) and illicit drug use in middle adulthood. Children with documented cases of physical and sexual abuse and neglect (ages 0-11) during 1967-1971 were matched with non-maltreated children and followed into middle adulthood (approximate age 39). Mediators were assessed in young adulthood (approximate age 29) through in-person interviews between 1989 and 1995 and official arrest records through 1994 (N = 1,196). Drug use was assessed via self-reports of past year use of marijuana, psychedelics, cocaine, and/or heroin during 2000-2002 (N = 896). Latent variable structural equation modeling (SEM) was used to test: (1) a four-factor model with separate pathways from CAN to illicit drug use through each of the mediating risk factors and (2) a second-order model with a single mediating risk factor comprised of prostitution, homelessness, delinquency and crime, and poor school performance. Analyses were performed separately for women and men, controlling for race/ethnicity and early drug use. In the four-factor model for both men and women, CAN was significantly related to each of the mediators, but no paths from the mediators to drug use were significant. For women, the second-order risk factor mediated the relationship between CAN and illicit drug use in middle adulthood. For men, neither child abuse and neglect nor the second-order risk factor predicted drug use in middle adulthood. These results suggest that for women, the path from CAN to middle adulthood drug use is part of a general "problem behavior syndrome" evident earlier in life.

Glucose dispersion measurement using white-light LCI

NASA Astrophysics Data System (ADS)

Liu, Juan; Bagherzadeh, Morteza; Hitzenberger, Christoph K.; Pircher, Michael; Zawadzki, Robert; Fercher, Adolf F.

2003-07-01

We measured second order dispersion of glucose solution using a Michelson Low Coherent Interferometer (LCI). Three different glucose concentrations: 20mg/dl (hypoglycemia), 100mg/dl (normal level), and 500mg/dl (hyperglycemia) are investigated over the wavelength range 0.5μm to 0.85μm, and the investigation shows that different concentrations are associated with different second-order dispersions. The second-order dispersions for wavelengths from 0.55μm to 0.8μm are determined by Fourier analysis of the interferogram. This approach can be applied to measure the second-order dispersion for distinguishing the different glucose concentrations. It can be considered as a potentially noninvasive method to determine glucose concentration in human eye. A brief discussion is presented in this poster as well.

Multistability of second-order competitive neural networks with nondecreasing saturated activation functions.

PubMed

Nie, Xiaobing; Cao, Jinde

2011-11-01

In this paper, second-order interactions are introduced into competitive neural networks (NNs) and the multistability is discussed for second-order competitive NNs (SOCNNs) with nondecreasing saturated activation functions. Firstly, based on decomposition of state space, Cauchy convergence principle, and inequality technique, some sufficient conditions ensuring the local exponential stability of 2N equilibrium points are derived. Secondly, some conditions are obtained for ascertaining equilibrium points to be locally exponentially stable and to be located in any designated region. Thirdly, the theory is extended to more general saturated activation functions with 2r corner points and a sufficient criterion is given under which the SOCNNs can have (r+1)N locally exponentially stable equilibrium points. Even if there is no second-order interactions, the obtained results are less restrictive than those in some recent works. Finally, three examples with their simulations are presented to verify the theoretical analysis.

Attachment Insecurity in Advanced Cancer Patients: Psychometric Properties of the German Version of the Brief Experiences in Close Relationships Scale (ECR-M16-G).

PubMed

Philipp, Rebecca; Vehling, Sigrun; Scheffold, Katharina; Grünke, Britta; Härter, Martin; Mehnert, Anja; Oechsle, Karin; Schulz-Kindermann, Frank; Lo, Christopher

2017-10-01

Attachment insecurity refers to difficulty in trusting and relying on others in times of need. Its underlying factors attachment anxiety and attachment avoidance have been empirically associated with impaired coping in advanced cancer and, therefore, should be considered in individually tailored medical and psychosocial treatment. The objective of this study was to evaluate the psychometric properties of the German translation of the Brief Experiences in Close Relationships Scale (ECR-M16-G). We recruited 182 advanced cancer patients from outpatient psycho-oncology clinics of the University Medical Center Hamburg-Eppendorf and the University Medical Center Leipzig, local and external cancer care facilities. We performed confirmatory factor analysis to replicate the higher order factor structure reported in previous research. We conducted item and reliability analysis, also correlation analysis, to examine concurrent validity. One hundred fifty-eight patients completed the ECR-M16-G (women 61%, mean age 57.9, SD = 11.1). We replicated the factor structure with the subscales Attachment Anxiety and Attachment Avoidance as second-order factors and Worrying about relationships, Frustration about unavailability, Discomfort with close others, and Turning away from others as first-order factors. An adjusted model that interchanged factor loadings of items 4 and 10 showed good fit (Comparative Fit Index = 0.94, Non-Normed Fit Index = 0.93, root mean square error of approximation = 0.05). Subscales showed acceptable to good internal consistency (anxiety α = .81 and avoidance α = .78). Attachment insecurity (mean = 3.1, SD = 1.0) was positively associated with depression, anxiety, demoralization (P < 0.001), and symptom burden (P = 0.02) and negatively associated with spiritual well-being (P < 0.001). The ECR-M16-G is a valid and reliable measure of attachment insecurity in patients with advanced cancer and can be recommended as a tool for clinical care and further research. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

The Responsive Environmental Assessment for Classroom Teaching (REACT): the dimensionality of student perceptions of the instructional environment.

PubMed

Nelson, Peter M; Demers, Joseph A; Christ, Theodore J

2014-06-01

This study details the initial development of the Responsive Environmental Assessment for Classroom Teachers (REACT). REACT was developed as a questionnaire to evaluate student perceptions of the classroom teaching environment. Researchers engaged in an iterative process to develop, field test, and analyze student responses on 100 rating-scale items. Participants included 1,465 middle school students across 48 classrooms in the Midwest. Item analysis, including exploratory and confirmatory factor analysis, was used to refine a 27-item scale with a second-order factor structure. Results support the interpretation of a single general dimension of the Classroom Teaching Environment with 6 subscale dimensions: Positive Reinforcement, Instructional Presentation, Goal Setting, Differentiated Instruction, Formative Feedback, and Instructional Enjoyment. Applications of REACT in research and practice are discussed along with implications for future research and the development of classroom environment measures. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Reliability and validity of the personality inventory for DSM-5 (PID-5): predicting DSM-IV personality disorders and psychopathy in community-dwelling Italian adults.

PubMed

Fossati, Andrea; Krueger, Robert F; Markon, Kristian E; Borroni, Serena; Maffei, Cesare

2013-12-01

In order to assess the internal consistency, factor structure, and ability to recover DSM-IV personality disorders (PDs) of the Personality Inventory for DSM-5 (PID-5) scales, 710 Italian adult community dwelling volunteers were administered the Italian translation of the PID-5, as well as the Italian translation of the Personality Diagnostic Questionnaire-4+ (PDQ-4+). Cronbach's alpha values were >.70 for all PID-5 facet scales and greater than .90 for all PID-5 domain scales. Parallel analysis and confirmatory factor analysis supported the theoretical five-factor model of the PID-5 trait scales. Regression analyses showed that both PID-5 trait and domain scales explained a substantial amount of variance in the PDQ-4+ PD scales, with the exception of the Passive-Aggressive PD scale. When the PID-5 was administered to a second independent sample of 389 Italian adult community dwelling volunteers, the basic psychometric properties of the scale were replicated. In this second sample, the PID-5 trait and domain scales proved to be significant predictors of psychopathy measures. As a whole, the results of the present study support the hypothesis that the PID-5 is a reliable instrument which is able to recover DSM-IV PDs, as well as to capture personality pathology that is not included in the DSM-IV (namely, psychopathy).

Portuguese version of the PTSD Checklist-Military Version (PCL-M)-I: Confirmatory Factor Analysis and reliability.

PubMed

Carvalho, Teresa; Cunha, Marina; Pinto-Gouveia, José; Duarte, Joana

2015-03-30

The PTSD Checklist-Military Version (PCL-M) is a brief self-report instrument widely used to assess Post-traumatic Stress Disorder (PTSD) symptomatology in war Veterans, according to DSM-IV. This study sought out to explore the factor structure and reliability of the Portuguese version of the PCL-M. A sample of 660 Portuguese Colonial War Veterans completed the PCL-M. Several Confirmatory Factor Analyses were conducted to test different structures for PCL-M PTSD symptoms. Although the respecified first-order four-factor model based on King et al.'s model showed the best fit to the data, the respecified first and second-order models based on the DSM-IV symptom clusters also presented an acceptable fit. In addition, the PCL-M showed adequate reliability. The Portuguese version of the PCL-M is thus a valid and reliable measure to assess the severity of PTSD symptoms as described in DSM-IV. Its use with Portuguese Colonial War Veterans may ease screening of possible PTSD cases, promote more suitable treatment planning, and enable monitoring of therapeutic outcomes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Exploring item and higher order factor structure with the Schmid-Leiman solution: syntax codes for SPSS and SAS.

PubMed

Wolff, Hans-Georg; Preising, Katja

2005-02-01

To ease the interpretation of higher order factor analysis, the direct relationships between variables and higher order factors may be calculated by the Schmid-Leiman solution (SLS; Schmid & Leiman, 1957). This simple transformation of higher order factor analysis orthogonalizes first-order and higher order factors and thereby allows the interpretation of the relative impact of factor levels on variables. The Schmid-Leiman solution may also be used to facilitate theorizing and scale development. The rationale for the procedure is presented, supplemented by syntax codes for SPSS and SAS, since the transformation is not part of most statistical programs. Syntax codes may also be downloaded from www.psychonomic.org/archive/.

School Bureaucratization and Alienation from High School

ERIC Educational Resources Information Center

Anderson, Barry D.

1973-01-01

The major goals of this study are to identify dimensions of bureaucracy and alienation, to determine the relationship of these dimensions to second-order, or integrating, factors, and to determine the relationships between the integrating factors of bureaucratic structure and alienation. (Author)

[Analysis and experimental verification of sensitivity and SNR of laser warning receiver].

PubMed

Zhang, Ji-Long; Wang, Ming; Tian, Er-Ming; Li, Xiao; Wang, Zhi-Bin; Zhang, Yue

2009-01-01

In order to countermeasure increasingly serious threat from hostile laser in modern war, it is urgent to do research on laser warning technology and system, and the sensitivity and signal to noise ratio (SNR) are two important performance parameters in laser warning system. In the present paper, based on the signal statistical detection theory, a method for calculation of the sensitivity and SNR in coherent detection laser warning receiver (LWR) has been proposed. Firstly, the probabilities of the laser signal and receiver noise were analyzed. Secondly, based on the threshold detection theory and Neyman-Pearson criteria, the signal current equation was established by introducing detection probability factor and false alarm rate factor, then, the mathematical expressions of sensitivity and SNR were deduced. Finally, by using method, the sensitivity and SNR of the sinusoidal grating laser warning receiver developed by our group were analyzed, and the theoretic calculation and experimental results indicate that the SNR analysis method is feasible, and can be used in performance analysis of LWR.

Adaptation and validation in Spanish of the Group Environment Questionnaire (GEQ) with professional football players.

PubMed

Leo, Francisco Miguel; González-Ponce, Inmaculada; Sánchez-Oliva, David; Pulido, Juan José; García-Calvo, Tomás

2015-01-01

This investigation presents two studies with the goal of adapting and validating a short version of the Group Environment Questionnaire in the Spanish sport context with professional players. Study 1 used a sample of 377 male soccer players aged between 18 and 39 years ( M = 24.51, SD = 3.73), in a preliminary study using exploratory factor analysis. Study 2 used a sample of 604 professional male and female athletes, ages between 15 and 38 years ( M = 24.34, SD = 4.03). The data analyzed were collected at three moments of the season. For each measurement, we developed seven first- and second-order structures that were analyzed with confirmatory factor analysis. Study 1 indicated appropriate factorial validity (> .60) and internal consistency (> .70), with only Item 3 presenting a low factor loading (.11), so its drafting was modified in the next study. Study 2 revealed that the Spanish version of the GEQ has high levels of internal consistency (> .70) and acceptable fit index values in its original four first-order factor structure in all three measurements ( χ²/df = 4.39, CFI = .95, IFI = .95, RMSEA = .07, SRMR = .04, AIC = 271.09). Discriminant validity (from r = .45 to r = .72) and concurrent validity (from r = .21 to r = .60) also presented appropriate values. Lastly, we conducted analysis of invariance, confirming that the models established in the different measurements were invariant. The short 12-item adaptation of the GEQ to Spanish is a valid and reliable instrument to measure team cohesion in professional male and female soccer players.

Changing Course: Reflections of Second-Career Teachers

ERIC Educational Resources Information Center

Lee, Darrell

2011-01-01

This study examined the phenomenon of second-career teachers. The participants in this study shared their reflections concerning the motivating factors and common experiences associated with leaving established professions in order to pursue careers in teaching. The study also inquired into the process involved in professional preparation as well…

Active Mobility and Environment: A Pilot Qualitative Study for the Design of a New Questionnaire

PubMed Central

Salze, Paul; Weber, Christiane; Feuillet, Thierry; Charreire, Hélène; Menai, Mehdi; Perchoux, Camille; Nazare, Julie-Anne; Simon, Chantal; Oppert, Jean-Michel

2017-01-01

It is generally accepted that active mobility, mainly walking and cycling, contributes to people’s physical and mental health. One of the current challenges is to improve our understanding of this type of behaviour. This study aims to identify factors from the daily-life environment that may be related to active mobility behaviours, in order to design a new questionnaire for a quantitative study of a large adult population. The new questionnaire obtained through this pilot study combines information from interviews with existing questionnaires materials in order to introduce new factors while retaining the factors already assessed. This approach comprises three stages. The first was a content analysis (Reinert method) of interviews with a sample of participants about daily living activities as well as mobility. This stage led to a typology of factors suggested by interviews. The second was a scoping review of the literature in order to identify the active mobility questionnaires currently used in international literature. The last stage was a cross-tabulation of the factors resulting from the written interviews and the questionnaires. A table of the inter-relationships between the interview-based typology and the questionnaires shows discrepancies between factors considered by the existing questionnaires, and factors coming from individual interviews. Independent factors which were ignored in or absent from the questionnaires are the housing situation within the urban structure, overall consideration of the activity space beyond the limits of the residential neighbourhood, the perception of all the transportation modes, and the time scheduling impacting the modes actually used. Our new questionnaire integrates both the usual factors and the new factors that may be related to active mobility behaviours. PMID:28052086

Active Mobility and Environment: A Pilot Qualitative Study for the Design of a New Questionnaire.

PubMed

Hess, Franck; Salze, Paul; Weber, Christiane; Feuillet, Thierry; Charreire, Hélène; Menai, Mehdi; Perchoux, Camille; Nazare, Julie-Anne; Simon, Chantal; Oppert, Jean-Michel; Enaux, Christophe

2017-01-01

It is generally accepted that active mobility, mainly walking and cycling, contributes to people's physical and mental health. One of the current challenges is to improve our understanding of this type of behaviour. This study aims to identify factors from the daily-life environment that may be related to active mobility behaviours, in order to design a new questionnaire for a quantitative study of a large adult population. The new questionnaire obtained through this pilot study combines information from interviews with existing questionnaires materials in order to introduce new factors while retaining the factors already assessed. This approach comprises three stages. The first was a content analysis (Reinert method) of interviews with a sample of participants about daily living activities as well as mobility. This stage led to a typology of factors suggested by interviews. The second was a scoping review of the literature in order to identify the active mobility questionnaires currently used in international literature. The last stage was a cross-tabulation of the factors resulting from the written interviews and the questionnaires. A table of the inter-relationships between the interview-based typology and the questionnaires shows discrepancies between factors considered by the existing questionnaires, and factors coming from individual interviews. Independent factors which were ignored in or absent from the questionnaires are the housing situation within the urban structure, overall consideration of the activity space beyond the limits of the residential neighbourhood, the perception of all the transportation modes, and the time scheduling impacting the modes actually used. Our new questionnaire integrates both the usual factors and the new factors that may be related to active mobility behaviours.

Urdu translation and validation of shorter version of Positive Affect and Negative Affect Schedule (PANAS) on Pakistani bank employees.

PubMed

Akhter, Noreen

2017-10-01

To translate, adapt and validate shorter version of positive affect and negative affect scale on Pakistani corporate employees. This cross-sectional study was conducted in the twin cities of Islamabad and Rawalpindi from October 2014 to December 2015. The study was completed into two independent parts. In part one, the scale was translated by forward translation. Then it was pilot-tested and administered on customer services employees from commercial banks and the telecommunication sector. Data of the pilot study was analysed by using exploratory factor analysis to extract the initial factor of positive affect and negative affect scale. Part two comprised the main study. Commercial bank employees were included in the sample using convenient sampling technique. Data of the main study was analysed using confirmatory factor analysis in order to establish construct validity of positive affect and negative affect scale. There were145 participants in the first part of the study and 495 in the second. Results of confirmatory factor analysis confirmed the two-factor structure of positive affect and negative affect scale suggesting that the scale has two distinct domains, i.e. positive affect and negative affect. The shorter version of positive affect and negative affect scale was found to be a valid and reliable measure.

Determinants of birthweight: gender based analysis.

PubMed

Halileh, Samia; Abu-Rmeileh, Niveen; Watt, Graham; Spencer, Nick; Gordon, Nahida

2008-09-01

The objective of this cross sectional study is to look at determinants of birth weight and their association with the gender of the baby in 2,795 full term children living in the occupied Palestinian territory, derived from a stratified random sample of 2,994 households in the West Bank and 2,234 households in the Gaza Strip. The response rate was 85%. Multivariable analysis using analysis of variance for mixed models showed that sex and birth order, maternal age and education and to a lesser extent region were determinants of birth weight for all children. The effect of maternal education on birth weight differed for female and male infants, tending to be relatively unchanged for male infants and with mean birth weights increasing with maternal education in female infants. The effect of birth order differed by maternal age, with mean birth weight increasing with maternal age for first and second births; but being unaffected by maternal age for infants of birth order greater than two. We conclude that birth weight is influenced by common biological determinants across cultures, but is also influenced by social, ethnic, and environmental factors that are culture specific, of which some might be gender related.

Interval oscillation criteria for second-order forced impulsive delay differential equations with damping term.

PubMed

Thandapani, Ethiraju; Kannan, Manju; Pinelas, Sandra

2016-01-01

In this paper, we present some sufficient conditions for the oscillation of all solutions of a second order forced impulsive delay differential equation with damping term. Three factors-impulse, delay and damping that affect the interval qualitative properties of solutions of equations are taken into account together. The results obtained in this paper extend and generalize some of the the known results for forced impulsive differential equations. An example is provided to illustrate the main result.

The Meaning of Higher-Order Factors in Reflective-Measurement Models

ERIC Educational Resources Information Center

Eid, Michael; Koch, Tobias

2014-01-01

Higher-order factor analysis is a widely used approach for analyzing the structure of a multidimensional test. Whenever first-order factors are correlated researchers are tempted to apply a higher-order factor model. But is this reasonable? What do the higher-order factors measure? What is their meaning? Willoughby, Holochwost, Blanton, and Blair…

Psychometric properties of the Resilience Scale for Adults (RSA) and its relationship with life-stress, anxiety and depression in a Hispanic Latin-American community sample.

PubMed

Morote, Roxanna; Hjemdal, Odin; Martinez Uribe, Patricia; Corveleyn, Jozef

2017-01-01

Resilience is a multi-dimensional construct associated with health and well-being. At present, we do not yet have a valid, scientific instrument that is designed to evaluate adult resilience in Spanish-speaking countries and that accounts for family, social and individual components. This study aimed at investigating the construct and cross-cultural validity of the Resilience Scale for Adults (RSA) by combining Confirmatory Factor Analysis (CFA), Multidimensional Scaling (MDS) and Hierarchical Regression models in a Hispanic Latin-American group. A community sample of 805 adults answered the RSA, Spanish Language Stressful Life-Events checklist (SL-SLE), and the Hopkins Symptom Checklist-25 (HSCL-25). First-order CFA verified the six factors structure for the RSA (RMSEA = .037, SRMR = .047, CFI = .91, TLI = .90). Five RSA scales and total score have good internal consistency (scales α > .70; total score α = .90). Two second-order CFA verified the intrapersonal and interpersonal dimensions of the protector factors of resilience, as well as their commonality and uniqueness with affective symptoms (anxiety and depression). An exploratory MDS reproduced the relations of RSA items and factors at first and second-order levels against random simulated data, thereby providing initial evidence of its cross-cultural validity in a Spanish-speaking group. The Four-steps hierarchical model showed that the RSA scales are the strongest predictors of anxiety and depression-greater than gender, age, education and stressful life-events. Three RSA scales are significant unique predictors of affective symptoms. In addition, similar to findings in diverse cultural settings, resilience is positively associated with age but not with education. Women report higher scores of Social Resources and Social Competence and lower scores of Perception of the Self. In conclusion, this study demonstrates the construct and criterion-related validity of the RSA in broad, diverse and Spanish speaking sample.

Psychometric properties of the Resilience Scale for Adults (RSA) and its relationship with life-stress, anxiety and depression in a Hispanic Latin-American community sample

PubMed Central

Martinez Uribe, Patricia; Corveleyn, Jozef

2017-01-01

Resilience is a multi-dimensional construct associated with health and well-being. At present, we do not yet have a valid, scientific instrument that is designed to evaluate adult resilience in Spanish-speaking countries and that accounts for family, social and individual components. This study aimed at investigating the construct and cross-cultural validity of the Resilience Scale for Adults (RSA) by combining Confirmatory Factor Analysis (CFA), Multidimensional Scaling (MDS) and Hierarchical Regression models in a Hispanic Latin-American group. A community sample of 805 adults answered the RSA, Spanish Language Stressful Life-Events checklist (SL-SLE), and the Hopkins Symptom Checklist-25 (HSCL-25). First-order CFA verified the six factors structure for the RSA (RMSEA = .037, SRMR = .047, CFI = .91, TLI = .90). Five RSA scales and total score have good internal consistency (scales α > .70; total score α = .90). Two second-order CFA verified the intrapersonal and interpersonal dimensions of the protector factors of resilience, as well as their commonality and uniqueness with affective symptoms (anxiety and depression). An exploratory MDS reproduced the relations of RSA items and factors at first and second-order levels against random simulated data, thereby providing initial evidence of its cross-cultural validity in a Spanish-speaking group. The Four-steps hierarchical model showed that the RSA scales are the strongest predictors of anxiety and depression–greater than gender, age, education and stressful life-events. Three RSA scales are significant unique predictors of affective symptoms. In addition, similar to findings in diverse cultural settings, resilience is positively associated with age but not with education. Women report higher scores of Social Resources and Social Competence and lower scores of Perception of the Self. In conclusion, this study demonstrates the construct and criterion-related validity of the RSA in broad, diverse and Spanish speaking sample. PMID:29125876

Management of the second phase of labour: perineum protection techniques.

PubMed

Laganà, A S; Burgio, M A; Retto, G; Pizzo, A; Granese, R; Sturlese, E; Ciancimino, L; Chiofalo, B; Retto, A; Triolo, O

2015-06-01

The obstetric experience alongside scientific evidences in literature indicate several management techniques during the expulsive period of labour to minimize obstetric complications. Among the various methods that can be used for the protection of the perineum during the expulsive phase, some are performed prepartum (perineum massage), while most are used during childbirth. Among the second group, progressively increasing importance is assumed by the manual techniques to protect the perineum (using the "hands-on" and "hands-off") and by episiotomy. These techniques, when used in accordance to the guidelines, may favour the reduction of adverse outcomes for both the mother and the newborn, both immediately after birth and after a longer time. The midwife should be aware of the evidences in literature so that a critical analysis of the available techniques can be made and put in action during the expulsive phase in order to protect the mother and the foetus from any unfavourable outcomes. Currently, clinical evidence in literature is directing obstetric and medical staff towards a careful analysis of the maternal-foetal parameters, in order to achieve a precise assessment of the risks factors of intrapartum and postpartum outcomes. Increasingly, there is the need for close collaboration between the midwife and medical staff to ensure proper personalized assistance based on the peculiar characteristics of the woman and the fetus.

Modelling and optimization of semi-solid processing of 7075 Al alloy

NASA Astrophysics Data System (ADS)

Binesh, B.; Aghaie-Khafri, M.

2017-09-01

The new modified strain-induced melt activation (SIMA) process presented by Binesh and Aghaie-Khafri was optimized using a response surface methodology to improve the thixotropic characteristics of semi-solid 7075 alloy. The responses, namely the average grain size and the shape factor, were considered as functions of three independent input variables: effective strain, isothermal holding temperature and time. Mathematical models for the responses were developed using the regression analysis technique, and the adequacy of the models was validated by the analysis of variance method. The calculated results correlated fairly well with the experiments. It was found that all the first- and second-order terms of the independent parameters and the interactive terms of the effective strain and holding time were statistically significant for the responses. In order to simultaneously optimize the responses, the desirable values for the effective strain, holding temperature and time were predicted to be 5.1, 609 °C and 14 min, respectively, when employing the desirability function approach. Based on the optimization results, a significant improvement in the average grain size and shape factor of the semi-solid slurry prepared by the new modified SIMA process was observed.

Website Analysis as a Tool for Task-Based Language Learning and Higher Order Thinking in an EFL Context

ERIC Educational Resources Information Center

Roy, Debopriyo

2014-01-01

Besides focusing on grammar, writing skills, and web-based language learning, researchers in "CALL" and second language acquisition have also argued for the importance of promoting higher-order thinking skills in ESL (English as Second Language) and EFL (English as Foreign Language) classrooms. There is solid evidence supporting the…

Reductions of topologically massive gravity I: Hamiltonian analysis of second order degenerate Lagrangians

NASA Astrophysics Data System (ADS)

Ćaǧatay Uçgun, Filiz; Esen, Oǧul; Gümral, Hasan

2018-01-01

We present Skinner-Rusk and Hamiltonian formalisms of second order degenerate Clément and Sarıoğlu-Tekin Lagrangians. The Dirac-Bergmann constraint algorithm is employed to obtain Hamiltonian realizations of Lagrangian theories. The Gotay-Nester-Hinds algorithm is used to investigate Skinner-Rusk formalisms of these systems.

Domain decomposition methods in aerodynamics

NASA Technical Reports Server (NTRS)

Venkatakrishnan, V.; Saltz, Joel

1990-01-01

Compressible Euler equations are solved for two-dimensional problems by a preconditioned conjugate gradient-like technique. An approximate Riemann solver is used to compute the numerical fluxes to second order accuracy in space. Two ways to achieve parallelism are tested, one which makes use of parallelism inherent in triangular solves and the other which employs domain decomposition techniques. The vectorization/parallelism in triangular solves is realized by the use of a recording technique called wavefront ordering. This process involves the interpretation of the triangular matrix as a directed graph and the analysis of the data dependencies. It is noted that the factorization can also be done in parallel with the wave front ordering. The performances of two ways of partitioning the domain, strips and slabs, are compared. Results on Cray YMP are reported for an inviscid transonic test case. The performances of linear algebra kernels are also reported.

Stability and stabilization of the lattice Boltzmann method

NASA Astrophysics Data System (ADS)

Brownlee, R. A.; Gorban, A. N.; Levesley, J.

2007-03-01

We revisit the classical stability versus accuracy dilemma for the lattice Boltzmann methods (LBM). Our goal is a stable method of second-order accuracy for fluid dynamics based on the lattice Bhatnager-Gross-Krook method (LBGK). The LBGK scheme can be recognized as a discrete dynamical system generated by free flight and entropic involution. In this framework the stability and accuracy analysis are more natural. We find the necessary and sufficient conditions for second-order accurate fluid dynamics modeling. In particular, it is proven that in order to guarantee second-order accuracy the distribution should belong to a distinguished surface—the invariant film (up to second order in the time step). This surface is the trajectory of the (quasi)equilibrium distribution surface under free flight. The main instability mechanisms are identified. The simplest recipes for stabilization add no artificial dissipation (up to second order) and provide second-order accuracy of the method. Two other prescriptions add some artificial dissipation locally and prevent the system from loss of positivity and local blowup. Demonstration of the proposed stable LBGK schemes are provided by the numerical simulation of a one-dimensional (1D) shock tube and the unsteady 2D flow around a square cylinder up to Reynolds number Rẽ20000 .

A nonlinear macromodel of the bipolar integrated circuit operational amplifier for electromagnetic interference analysis

NASA Astrophysics Data System (ADS)

Chen, G. K. C.

1981-06-01

A nonlinear macromodel for the bipolar transistor integrated circuit operational amplifier is derived from the macromodel proposed by Boyle. The nonlinear macromodel contains only two nonlinear transistors in the input stage in a differential amplifier configuration. Parasitic capacitance effects are represented by capacitors placed at the collectors and emitters of the input transistors. The nonlinear macromodel is effective in predicting the second order intermodulation effect of operational amplifiers in a unity gain buffer amplifier configuration. The nonlinear analysis computer program NCAP is used for the analysis. Accurate prediction of demodulation of amplitude modulated RF signals with RF carrier frequencies in the 0.05 to 100 MHz range is achieved. The macromodel predicted results, presented in the form of second order nonlinear transfer function, come to within 6 dB of the full model predictions for the 741 type of operational amplifiers for values of the second order transfer function greater than -40 dB.

The need for higher-order averaging in the stability analysis of hovering, flapping-wing flight.

PubMed

Taha, Haithem E; Tahmasian, Sevak; Woolsey, Craig A; Nayfeh, Ali H; Hajj, Muhammad R

2015-01-05

Because of the relatively high flapping frequency associated with hovering insects and flapping wing micro-air vehicles (FWMAVs), dynamic stability analysis typically involves direct averaging of the time-periodic dynamics over a flapping cycle. However, direct application of the averaging theorem may lead to false conclusions about the dynamics and stability of hovering insects and FWMAVs. Higher-order averaging techniques may be needed to understand the dynamics of flapping wing flight and to analyze its stability. We use second-order averaging to analyze the hovering dynamics of five insects in response to high-amplitude, high-frequency, periodic wing motion. We discuss the applicability of direct averaging versus second-order averaging for these insects.

Wellness Factors as Predictors of Alcohol Use among Undergraduates: Implications for Prevention and Intervention

ERIC Educational Resources Information Center

Lewis, Todd F.; Myers, Jane E.

2010-01-01

A pilot study examining holistic wellness factors and drinking behaviors among undergraduate students revealed several significant relationships. Two second-order wellness factors of the Indivisible Self model of wellness--Coping Self and Essential Self--were negatively associated with both alcohol use intensity and drinking consequences.…

Texture analysis of apparent diffusion coefficient maps for treatment response assessment in prostate cancer bone metastases-A pilot study.

PubMed

Reischauer, Carolin; Patzwahl, René; Koh, Dow-Mu; Froehlich, Johannes M; Gutzeit, Andreas

2018-04-01

To evaluate whole-lesion volumetric texture analysis of apparent diffusion coefficient (ADC) maps for assessing treatment response in prostate cancer bone metastases. Texture analysis is performed in 12 treatment-naïve patients with 34 metastases before treatment and at one, two, and three months after the initiation of androgen deprivation therapy. Four first-order and 19 second-order statistical texture features are computed on the ADC maps in each lesion at every time point. Repeatability, inter-patient variability, and changes in the feature values under therapy are investigated. Spearman rank's correlation coefficients are calculated across time to demonstrate the relationship between the texture features and the serum prostate specific antigen (PSA) levels. With few exceptions, the texture features exhibited moderate to high precision. At the same time, Friedman's tests revealed that all first-order and second-order statistical texture features changed significantly in response to therapy. Thereby, the majority of texture features showed significant changes in their values at all post-treatment time points relative to baseline. Bivariate analysis detected significant correlations between the great majority of texture features and the serum PSA levels. Thereby, three first-order and six second-order statistical features showed strong correlations with the serum PSA levels across time. The findings in the present work indicate that whole-tumor volumetric texture analysis may be utilized for response assessment in prostate cancer bone metastases. The approach may be used as a complementary measure for treatment monitoring in conjunction with averaged ADC values. Copyright © 2018 Elsevier B.V. All rights reserved.

A hierarchical factor analysis of a safety culture survey.

PubMed

Frazier, Christopher B; Ludwig, Timothy D; Whitaker, Brian; Roberts, D Steve

2013-06-01

Recent reviews of safety culture measures have revealed a host of potential factors that could make up a safety culture (Flin, Mearns, O'Connor, & Bryden, 2000; Guldenmund, 2000). However, there is still little consensus regarding what the core factors of safety culture are. The purpose of the current research was to determine the core factors, as well as the structure of those factors that make up a safety culture, and establish which factors add meaningful value by factor analyzing a widely used safety culture survey. A 92-item survey was constructed by subject matter experts and was administered to 25,574 workers across five multi-national organizations in five different industries. Exploratory and hierarchical confirmatory factor analyses were conducted revealing four second-order factors of a Safety Culture consisting of Management Concern, Personal Responsibility for Safety, Peer Support for Safety, and Safety Management Systems. Additionally, a total of 12 first-order factors were found: three on Management Concern, three on Personal Responsibility, two on Peer Support, and four on Safety Management Systems. The resulting safety culture model addresses gaps in the literature by indentifying the core constructs which make up a safety culture. This clarification of the major factors emerging in the measurement of safety cultures should impact the industry through a more accurate description, measurement, and tracking of safety cultures to reduce loss due to injury. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Pharmacoeconomic analysis of recombinant factor VIIa versus APCC in the treatment of minor-to-moderate bleeds in hemophilia patients with inhibitors.

PubMed

Joshi, Ashish V; Stephens, Jennifer M; Munro, Vicki; Mathew, Prasad; Botteman, Marc F

2006-01-01

To compare the cost-effectiveness of three treatment regimens using recombinant activated Factor VII (rFVIIa), NovoSeven, and activated prothrombin-complex concentrate (APCC), FEIBA VH, for home treatment of minor-to-moderate bleeds in hemophilia patients with inhibitors. A literature-based, decision-analytic model was developed to compare three treatment regimens. The regimens consisting of first-, second-, and third-line treatments were: rFVIIa-rFVIIa-rFVIIa; APCC-rFVIIa-rFVIIa; and APCC-APCC-rFVIIa. Patients not responding to first-line treatment were administered second-line treatment, and those failing second-line received third-line treatment. Using literature and expert opinion, the model structure and base-case inputs were adapted to the US from a previously published analysis. The percentage of evaluable bleeds controlled with rFVIIa and APCC were obtained from published literature. Drug costs (2005 US$) based on average wholesale price were included in the base-case model. Univariate and probabilistic sensitivity analyses (second-order Monte Carlo simulation) were conducted by varying the efficacy, re-bleeding rates, patient weight, and dosing to ascertain robustness of the model. In the base-case analysis, the average cost per resolved bleed using rFVIIa as first-, second-, and third-line treatment was $28 076. Using APCC as first-line and rFVIIa as second- and third-line treatment resulted in an average cost per resolved bleed of $30 883, whereas the regimen using APCC as first- and second-line, and rFVIIa as third-line treatment was the most expensive, with an average cost per resolved bleed of $32 150. Cost offsets occurred for the rFVIIa-only regimen through avoidance of second and third lines of treatment. In probabilistic sensitivity analyses, the rFVIIa-only strategy was the least expensive strategy more than 68% of the time. The management of minor-to-moderate bleeds extends beyond the initial line of treatment, and should include the economic impact of re-bleeding and failures over multiple lines of treatment. In the majority of cases, the rFVIIa-only regimen appears to be a less expensive treatment option in inhibitor patients with minor-to-moderate bleeds over three lines of treatment.

Quantitative analysis of Earth's field NMR spectra of strongly-coupled heteronuclear systems.

PubMed

Halse, Meghan E; Callaghan, Paul T; Feland, Brett C; Wasylishen, Roderick E

2009-09-01

In the Earth's magnetic field, it is possible to observe spin systems consisting of unlike spins that exhibit strongly coupled second-order NMR spectra. Such spectra result when the J-coupling between two unlike spins is of the same order of magnitude as the difference in their Larmor precession frequencies. Although the analysis of second-order spectra involving only spin-(1/2) nuclei has been discussed since the early days of NMR spectroscopy, NMR spectra involving spin-(1/2) nuclei and quadrupolar (I>(1/2)) nuclei have rarely been treated. Two examples are presented here, the tetrahydroborate anion, BH4-, and the ammonium cation, NH4+. For the tetrahydroborate anion, (1)J((11)B,(1)H)=80.9Hz, and in an Earth's field of 53.3microT, nu((1)H)=2269Hz and nu((11)B)=728Hz. The (1)H NMR spectra exhibit features that both first- and second-order perturbation theory are unable to reproduce. On the other hand, second-order perturbation theory adequately describes (1)H NMR spectra of the ammonium anion, (14)NH4+, where (1)J((14)N,(1)H)=52.75Hz when nu((1)H)=2269Hz and nu((14)N)=164Hz. Contrary to an early report, we find that the (1)H NMR spectra are independent of the sign of (1)J((14)N,(1)H). Exact analysis of two-spin systems consisting of quadrupolar nuclei and spin-(1/2) nuclei are also discussed.

Students' motivation to study dentistry in Malaysia: an analysis using confirmatory factor analysis.

PubMed

Musa, Muhd Firdaus Che; Bernabé, Eduardo; Gallagher, Jennifer E

2015-06-12

Malaysia has experienced a significant expansion of dental schools over the past decade. Research into students' motivation may inform recruitment and retention of the future dental workforce. The objectives of this study were to explore students' motivation to study dentistry and whether that motivation varied by students' and school characteristics. All 530 final-year students in 11 dental schools (6 public and 5 private) in Malaysia were invited to participate at the end of 2013. The self-administered questionnaire, developed at King's College London, collected information on students' motivation to study dentistry and demographic background. Responses on students' motivation were collected using five-point ordinal scales. Confirmatory factor analysis (CFA) was used to evaluate the underlying structure of students' motivation to study dentistry. Multivariate analysis of variance (MANOVA) was used to compare factor scores for overall motivation and sub-domains by students' and school characteristics. Three hundred and fifty-six final-year students in eight schools (all public and two private) participated in the survey, representing an 83% response rate for these schools and 67% of all final-year students nationally. The majority of participants were 24 years old (47%), female (70%), Malay (56%) and from middle-income families (41%) and public schools (78%). CFA supported a model with five first-order factors (professional job, healthcare and people, academic, careers advising and family and friends) which were linked to a single second-order factor representing overall students' motivation. Academic factors and healthcare and people had the highest standardized factor loadings (0.90 and 0.71, respectively), suggesting they were the main motivation to study dentistry. MANOVA showed that students from private schools had higher scores for healthcare and people than those in public schools whereas Malay students had lower scores for family and friends than those from minority ethnic groups. No differences were found by age, sex, family income and school type. Using CFA, this study shows that academic factors were the main motivation to study dentistry in this group of Malaysian students. There were also variations in students' motivation by students' ethnicity and school sector but not by other factors.

The Historical Loss Scale: Longitudinal measurement equivalence and prospective links to anxiety among North American indigenous adolescents.

PubMed

Armenta, Brian E; Whitbeck, Les B; Habecker, Patrick N

2016-01-01

Thoughts of historical loss (i.e., the loss of culture, land, and people as a result of colonization) are conceptualized as a contributor to the contemporary distress experienced by North American Indigenous populations. Although discussions of historical loss and related constructs (e.g., historical trauma) are widespread within the Indigenous literature, empirical efforts to understand the consequence of historical loss are limited, partially because of the lack of valid assessments. In this study we evaluated the longitudinal measurement properties of the Historical Loss Scale (HLS)-a standardized measure that was developed to systematically examine the frequency with which Indigenous individuals think about historical loss-among a sample of North American Indigenous adolescents. We also test the hypothesis that thoughts of historical loss can be psychologically distressing. Via face-to-face interviews, 636 Indigenous adolescents from a single cultural group completed the HLS and a measure of anxiety at 4 time-points, which were separated by 1- to 2-year intervals (Mage = 12.09 years, SD = .86, 50.0% girls at baseline). Responses to the HLS were explained well by 3-factor (i.e., cultural loss, loss of people, and cultural mistreatment) and second-order factor structures. Both of these factor structures held full longitudinal metric (i.e., factor loadings) and scalar (i.e., intercepts) equivalence. In addition, using the second-order factor structure, more frequent thoughts of historical loss were associated with increased anxiety. The identified 3-factor and second-order HLS structures held full longitudinal measurement equivalence. Moreover, as predicted, our results suggest that historical loss can be psychologically distressing for Indigenous adolescents. (c) 2016 APA, all rights reserved).

Optimizing radiologist e-prescribing of CT oral contrast agent using a protocoling portal.

PubMed

Wasser, Elliot J; Galante, Nicholas J; Andriole, Katherine P; Farkas, Cameron; Khorasani, Ramin

2013-12-01

The purpose of this study is to quantify the time expenditure associated with radiologist ordering of CT oral contrast media when using an integrated protocoling portal and to determine radiologists' perceptions of the ordering process. This prospective study was performed at a large academic tertiary care facility. Detailed timing information for CT inpatient oral contrast orders placed via the computerized physician order entry (CPOE) system was gathered over a 14-day period. Analyses evaluated the amount of physician time required for each component of the ordering process. Radiologists' perceptions of the ordering process were assessed by survey. Descriptive statistics and chi-square analysis were performed. A total of 96 oral contrast agent orders were placed by 13 radiologists during the study period. The average time necessary to create a protocol for each case was 40.4 seconds (average range by subject, 20.0-130.0 seconds; SD, 37.1 seconds), and the average total time to create and sign each contrast agent order was 27.2 seconds (range, 10.0-50.0 seconds; SD, 22.4 seconds). Overall, 52.5% (21/40) of survey respondents indicated that radiologist entry of oral contrast agent orders improved patient safety. A minority of respondents (15% [6/40]) indicated that contrast agent order entry was either very or extremely disruptive to workflow. Radiologist e-prescribing of CT oral contrast agents using CPOE can be embedded in a protocol workflow. Integration of health IT tools can help to optimize user acceptance and adoption.

Application of Hermitian time-dependent coupled-cluster response Ansätze of second order to excitation energies and frequency-dependent dipole polarizabilities

NASA Astrophysics Data System (ADS)

Wälz, Gero; Kats, Daniel; Usvyat, Denis; Korona, Tatiana; Schütz, Martin

2012-11-01

Linear-response methods, based on the time-dependent variational coupled-cluster or the unitary coupled-cluster model, and truncated at the second order according to the Møller-Plesset partitioning, i.e., the TD-VCC[2] and TD-UCC[2] linear-response methods, are presented and compared. For both of these methods a Hermitian eigenvalue problem has to be solved to obtain excitation energies and state eigenvectors. The excitation energies thus are guaranteed always to be real valued, and the eigenvectors are mutually orthogonal, in contrast to response theories based on “traditional” coupled-cluster models. It turned out that the TD-UCC[2] working equations for excitation energies and polarizabilities are equivalent to those of the second-order algebraic diagrammatic construction scheme ADC(2). Numerical tests are carried out by calculating TD-VCC[2] and TD-UCC[2] excitation energies and frequency-dependent dipole polarizabilities for several test systems and by comparing them to the corresponding values obtained from other second- and higher-order methods. It turns out that the TD-VCC[2] polarizabilities in the frequency regions away from the poles are of a similar accuracy as for other second-order methods, as expected from the perturbative analysis of the TD-VCC[2] polarizability expression. On the other hand, the TD-VCC[2] excitation energies are systematically too low relative to other second-order methods (including TD-UCC[2]). On the basis of these results and an analysis presented in this work, we conjecture that the perturbative expansion of the Jacobian converges more slowly for the TD-VCC formalism than for TD-UCC or for response theories based on traditional coupled-cluster models.

Efficient second harmonic generation by para-nitroaniline embedded in electro-spun polymeric nanofibres

NASA Astrophysics Data System (ADS)

Gonçalves, Hugo; Saavedra, Inês; Ferreira, Rute AS; Lopes, PE; de Matos Gomes, Etelvina; Belsley, Michael

2018-03-01

Intense well polarized second harmonic light was generated by poly(methyl methacrylate) nanofibres with embedded para-nitroaniline nanocrystals. Subwavelength diameter fibres were electro-spun using a 1:2 weight ratio of chromophore to polymer. Analysis of the generated second harmonic light indicates that the para-nitroaniline molecules, which nominally crystalize in the centrosymmetric space group, were organized into noncentrosymmetric structures leading to a second order susceptibility dominated by a single tensor element. Under the best deposition conditions, the nanofibrers display an effective nonlinear optical susceptibility approximately two orders of magnitude greater than that of potassium dihydrogen phosphate. Generalizing this approach to a broad range of organic molecules with strong individual molecular second order nonlinear responses, but which nominally form centrosymmetric organic crystals, could open a new pathway for the fabrication of efficient sub-micron sized second harmonic light generators.

Simultaneous determination of α-asarone and β-asarone in Acorus tatarinowii using excitation-emission matrix fluorescence coupled with chemometrics methods

NASA Astrophysics Data System (ADS)

Bai, Xue-Mei; Liu, Tie; Liu, De-Long; Wei, Yong-Ju

2018-02-01

A chemometrics-assisted excitation-emission matrix (EEM) fluorescence method was proposed for simultaneous determination of α-asarone and β-asarone in Acorus tatarinowii. Using the strategy of combining EEM data with chemometrics methods, the simultaneous determination of α-asarone and β-asarone in the complex Traditional Chinese medicine system was achieved successfully, even in the presence of unexpected interferents. The physical or chemical separation step was avoided due to the use of ;mathematical separation;. Six second-order calibration methods were used including parallel factor analysis (PARAFAC), alternating trilinear decomposition (ATLD), alternating penalty trilinear decomposition (APTLD), self-weighted alternating trilinear decomposition (SWATLD), the unfolded partial least-squares (U-PLS) and multidimensional partial least-squares (N-PLS) with residual bilinearization (RBL). In addition, HPLC method was developed to further validate the presented strategy. Consequently, for the validation samples, the analytical results obtained by six second-order calibration methods were almost accurate. But for the Acorus tatarinowii samples, the results indicated a slightly better predictive ability of N-PLS/RBL procedure over other methods.

A second-order closure analysis of turbulent diffusion flames. [combustion physics

NASA Technical Reports Server (NTRS)

Varma, A. K.; Fishburne, E. S.; Beddini, R. A.

1977-01-01

A complete second-order closure computer program for the investigation of compressible, turbulent, reacting shear layers was developed. The equations for the means and the second order correlations were derived from the time-averaged Navier-Stokes equations and contain third order and higher order correlations, which have to be modeled in terms of the lower-order correlations to close the system of equations. In addition to fluid mechanical turbulence models and parameters used in previous studies of a variety of incompressible and compressible shear flows, a number of additional scalar correlations were modeled for chemically reacting flows, and a typical eddy model developed for the joint probability density function for all the scalars. The program which is capable of handling multi-species, multistep chemical reactions, was used to calculate nonreacting and reacting flows in a hydrogen-air diffusion flame.

A Comparison of Weights Matrices on Computation of Dengue Spatial Autocorrelation

NASA Astrophysics Data System (ADS)

Suryowati, K.; Bekti, R. D.; Faradila, A.

2018-04-01

Spatial autocorrelation is one of spatial analysis to identify patterns of relationship or correlation between locations. This method is very important to get information on the dispersal patterns characteristic of a region and linkages between locations. In this study, it applied on the incidence of Dengue Hemorrhagic Fever (DHF) in 17 sub districts in Sleman, Daerah Istimewa Yogyakarta Province. The link among location indicated by a spatial weight matrix. It describe the structure of neighbouring and reflects the spatial influence. According to the spatial data, type of weighting matrix can be divided into two types: point type (distance) and the neighbourhood area (contiguity). Selection weighting function is one determinant of the results of the spatial analysis. This study use queen contiguity based on first order neighbour weights, queen contiguity based on second order neighbour weights, and inverse distance weights. Queen contiguity first order and inverse distance weights shows that there is the significance spatial autocorrelation in DHF, but not by queen contiguity second order. Queen contiguity first and second order compute 68 and 86 neighbour list

Influences of Vehicle Size and Mass and Selected Driver Factors on Odds of Driver Fatality

PubMed Central

Padmanaban, Jeya

2003-01-01

Research was undertaken to determine vehicle size parameters influencing driver fatality odds, independent of mass, in two-vehicle collisions. Forty vehicle parameters were evaluated for 1,500 vehicle groupings. Logistic regression analyses show driver factors (belt use, age, drinking) collectively contribute more to fatality odds than vehicle factors, and that mass is the most important vehicular parameter influencing fatality odds for all crash configurations. In car crashes, other vehicle parameters with statistical significance had a second order effect compared to mass. In light truck-to-car crashes, “vehicle type-striking vehicle is light truck” was the most important parameter after mass, followed by vehicle height and bumper height, with second order effect. To understand the importance of “vehicle type” variable, further investigation of vehicle “stiffness” and other passenger car/light truck differentiating parameters is warranted. PMID:12941244

Assessment of sediment quality in the Mediterranean Sea-Boughrara lagoon exchange areas (southeastern Tunisia): GIS approach-based chemometric methods.

PubMed

Kharroubi, Adel; Gargouri, Dorra; Baati, Houda; Azri, Chafai

2012-06-01

Concentrations of selected heavy metals (Cd, Pb, Zn, Cu, Mn, and Fe) in surface sediments from 66 sites in both northern and eastern Mediterranean Sea-Boughrara lagoon exchange areas (southeastern Tunisia) were studied in order to understand current metal contamination due to the urbanization and economic development of nearby several coastal regions of the Gulf of Gabès. Multiple approaches were applied for the sediment quality assessment. These approaches were based on GIS coupled with chemometric methods (enrichment factors, geoaccumulation index, principal component analysis, and cluster analysis). Enrichment factors and principal component analysis revealed two distinct groups of metals. The first group corresponded to Fe and Mn derived from natural sources, and the second group contained Cd, Pb, Zn, and Cu originated from man-made sources. For these latter metals, cluster analysis showed two distinct distributions in the selected areas. They were attributed to temporal and spatial variations of contaminant sources input. The geoaccumulation index (I (geo)) values explained that only Cd, Pb, and Cu can be considered as moderate to extreme pollutants in the studied sediments.

Chitosan based grey wastewater treatment--a statistical design approach.

PubMed

Thirugnanasambandham, K; Sivakumar, V; Prakash Maran, J; Kandasamy, S

2014-01-01

In this present study, grey wastewater was treated under different operating conditions such as agitation time (1-3 min), pH (2.5-5.5), chitosan dose (0.3-0.6g/l) and settling time (10-20 min) using response surface methodology (RSM). Four factors with three levels Box-Behnken response surface design (BBD) were employed to optimize and investigate the effect of process variables on the responses such as turbidity, BOD and COD removal. The results were analyzed by Pareto analysis of variance (ANOVA) and second order polynomial models were developed in order to predict the responses. Under the optimum conditions, experimental values such as turbidity (96%), BOD (91%) and COD (73%) removals are closely agreed with predicted values. Copyright © 2013 Elsevier Ltd. All rights reserved.

Hope and Hopelessness: The Role of Hope in Buffering the Impact of Hopelessness on Suicidal Ideation.

PubMed

Huen, Jenny M Y; Ip, Brian Y T; Ho, Samuel M Y; Yip, Paul S F

2015-01-01

The present study investigated whether hope and hopelessness are better conceptualized as a single construct of bipolar spectrum or two distinct constructs and whether hope can moderate the relationship between hopelessness and suicidal ideation. Hope, hopelessness, and suicidal ideation were measured in a community sample of 2106 participants through a population-based household survey. Confirmatory factor analyses showed that a measurement model with separate, correlated second-order factors of hope and hopelessness provided a good fit to the data and was significantly better than that of the model collapsing hope and hopelessness into a single second-order factor. Negative binomial regression showed that hope and hopelessness interacted such that the effect of hopelessness on suicidal ideation was lower in individuals with higher hope than individuals with lower hope. Hope and hopelessness are two distinct but correlated constructs. Hope can act as a resilience factor that buffers the impact of hopelessness on suicidal ideation. Inducing hope in people may be a promising avenue for suicide prevention.

Development and validation of different methods manipulating zero order and first order spectra for determination of the partially overlapped mixture benazepril and amlodipine: A comparative study

NASA Astrophysics Data System (ADS)

Hemdan, A.

2016-07-01

Three simple, selective, and accurate spectrophotometric methods have been developed and then validated for the analysis of Benazepril (BENZ) and Amlodipine (AML) in bulk powder and pharmaceutical dosage form. The first method is the absorption factor (AF) for zero order and amplitude factor (P-F) for first order spectrum, where both BENZ and AML can be measured from their resolved zero order spectra at 238 nm or from their first order spectra at 253 nm. The second method is the constant multiplication coupled with constant subtraction (CM-CS) for zero order and successive derivative subtraction-constant multiplication (SDS-CM) for first order spectrum, where both BENZ and AML can be measured from their resolved zero order spectra at 240 nm and 238 nm, respectively, or from their first order spectra at 214 nm and 253 nm for Benazepril and Amlodipine respectively. The third method is the novel constant multiplication coupled with derivative zero crossing (CM-DZC) which is a stability indicating assay method for determination of Benazepril and Amlodipine in presence of the main degradation product of Benazepril which is Benazeprilate (BENZT). The three methods were validated as per the ICH guidelines and the standard curves were found to be linear in the range of 5-60 μg/mL for Benazepril and 5-30 for Amlodipine, with well accepted mean correlation coefficient for each analyte. The intra-day and inter-day precision and accuracy results were well within the acceptable limits.

Development and validation of different methods manipulating zero order and first order spectra for determination of the partially overlapped mixture benazepril and amlodipine: A comparative study.

PubMed

Hemdan, A

2016-07-05

Three simple, selective, and accurate spectrophotometric methods have been developed and then validated for the analysis of Benazepril (BENZ) and Amlodipine (AML) in bulk powder and pharmaceutical dosage form. The first method is the absorption factor (AF) for zero order and amplitude factor (P-F) for first order spectrum, where both BENZ and AML can be measured from their resolved zero order spectra at 238nm or from their first order spectra at 253nm. The second method is the constant multiplication coupled with constant subtraction (CM-CS) for zero order and successive derivative subtraction-constant multiplication (SDS-CM) for first order spectrum, where both BENZ and AML can be measured from their resolved zero order spectra at 240nm and 238nm, respectively, or from their first order spectra at 214nm and 253nm for Benazepril and Amlodipine respectively. The third method is the novel constant multiplication coupled with derivative zero crossing (CM-DZC) which is a stability indicating assay method for determination of Benazepril and Amlodipine in presence of the main degradation product of Benazepril which is Benazeprilate (BENZT). The three methods were validated as per the ICH guidelines and the standard curves were found to be linear in the range of 5-60μg/mL for Benazepril and 5-30 for Amlodipine, with well accepted mean correlation coefficient for each analyte. The intra-day and inter-day precision and accuracy results were well within the acceptable limits. Copyright © 2016 Elsevier B.V. All rights reserved.

Personality traits of a group of young adults from different family structures.

PubMed

Du Toit, J; Nel, E M; Steel, H R

1992-07-01

The impact of parental divorce and remarriage and young adults' gender on second-order personality traits, such as extraversion, anxiety, tough poise and independence, was examined. The responses of 227 young adults on the Sixteen Personality Factor Questionnaire (16PF; Cattell, Eber, & Tatsuoka, 1970) were subjected to a parametric multivariate analysis of variance. Results revealed significant differences between the anxiety scores of the young men and women as well as between those of the three different family-structure groups, but divorce and remarriage was not associated with either positive or negative personality development in this sample.

Rethinking Pedagogy for Second-Order Differential Equations: A Simplified Approach to Understanding Well-Posed Problems

ERIC Educational Resources Information Center

Tisdell, Christopher C.

2017-01-01

Knowing an equation has a unique solution is important from both a modelling and theoretical point of view. For over 70 years, the approach to learning and teaching "well posedness" of initial value problems (IVPs) for second- and higher-order ordinary differential equations has involved transforming the problem and its analysis to a…

Regression Analysis and Calibration Recommendations for the Characterization of Balance Temperature Effects

NASA Technical Reports Server (NTRS)

Ulbrich, N.; Volden, T.

2018-01-01

Analysis and use of temperature-dependent wind tunnel strain-gage balance calibration data are discussed in the paper. First, three different methods are presented and compared that may be used to process temperature-dependent strain-gage balance data. The first method uses an extended set of independent variables in order to process the data and predict balance loads. The second method applies an extended load iteration equation during the analysis of balance calibration data. The third method uses temperature-dependent sensitivities for the data analysis. Physical interpretations of the most important temperature-dependent regression model terms are provided that relate temperature compensation imperfections and the temperature-dependent nature of the gage factor to sets of regression model terms. Finally, balance calibration recommendations are listed so that temperature-dependent calibration data can be obtained and successfully processed using the reviewed analysis methods.

The structure of coping among older adults living with HIV/AIDS and depressive symptoms

PubMed Central

Hansen, Nathan B; Harrison, Blair; Fambro, Stacy; Bodnar, Sara; Heckman, Timothy G; Sikkema, Kathleen J

2013-01-01

One-third of adults living with HIV/AIDS are over the age of 50. This study evaluated the structure of coping among 307 older adults living with HIV/AIDS. Participants completed 61 coping items and measures of anxiety, depression, loneliness, and coping self-efficacy. Exploratory factor analyses retained 40 coping items loading on five specific first order factors (Distancing Avoidance, Social Support Seeking, Self-Destructive Avoidance, Spiritual Coping, and Solution-Focused Coping) and two general second order factors (Active and Avoidant Coping). Factors demonstrated good reliability and validity. Results suggest that general coping factors should be considered with specific factors when measuring coping among older adults. PMID:22453164

Outcome and prognostic factors in metastatic urothelial carcinoma patients receiving second-line chemotherapy: an analysis of real-world clinical practice data in Japan.

PubMed

Matsumoto, Ryuji; Abe, Takashige; Ishizaki, Junji; Kikuchi, Hiroshi; Harabayashi, Toru; Minami, Keita; Sazawa, Ataru; Mochizuki, Tango; Akino, Tomoshige; Murakumo, Masashi; Osawa, Takahiro; Maruyama, Satoru; Murai, Sachiyo; Shinohara, Nobuo

2018-06-25

The objective of the present study was to investigate the survival outcome and prognostic factors of metastatic urothelial carcinoma patients treated with second-line systemic chemotherapy in real-world clinical practice. Overall, 114 patients with metastatic urothelial carcinoma undergoing second-line systemic chemotherapy were included in this retrospective analysis. The dominant second-line chemotherapy was a paclitaxel-based combination regimen (60%, 68/114). We assessed the progression-free survival and overall survival times using the Kaplan-Meier method. The Cox proportional hazards model was applied to identify the factors affecting overall survival. The median progression-free survival and overall survival times were 4 and 9 months, respectively. In the multivariate analysis, an Eastern Cooperative Oncology Group performance status score greater than 0 at presentation, C-reactive protein level ≧1 mg/dl and poor response to prior chemotherapy were adverse prognostic indicators. Patients with 0, 1, 2 and 3 of those risk factors had a median overall survival of 17, 12, 7 and 3 months, respectively. The Eastern Cooperative Oncology Group performance status at presentation, C-reactive protein level and response to prior chemotherapy were prognostic factors for metastatic urothelial carcinoma patients undergoing second-line chemotherapy. In the future, this information might help guide the choice of salvage treatment, such as second-line chemotherapy or immune checkpoint inhibitors, after the failure of first-line chemotherapy.

The performance of material management in health care organizations.

PubMed

Dacosta-Claro, Ivan

2002-01-01

This paper studies the hospital supply chain. The analysis of the operational and financial data of hospital administrative structures has permitted the discovery of the characteristics of work carried out by the employees and the different strategies used by the managers. Firstly, hospital supply chains must be classified into two groups influenced by medical factors (short-term and long-term hospitals). Secondly, two different management approaches can be observed when the supply chain operations are analysed. The first approach assigns a larger budget priority to inventory control, packages reception and internal distribution. Thus, the purchasing services have relatively fewer resources. In the second approach, contract negotiation and product ordering processes are enforced by the deployment of, relatively, more personnel. In both cases, the central store service performs merchandise reception and distribution according to the strategies determined by the purchasing service.

Dimensional Structure and Measurement Invariance of the Schizotypal Personality Questionnaire - Brief Revised (SPQ-BR) Scores Across American and Spanish Samples.

PubMed

Fonseca-Pedrero, Eduardo; Cohen, Alex; Ortuño-Sierra, Javier; de Álbeniz, Alicia Pérez; Muñiz, José

2017-08-01

The main goal of the present study was to test the measurement equivalence of the Schizotypal Personality Questionnaire - Brief Revised (SPQ-BR) scores in a large sample of Spanish and American non-clinical young adults. The sample was made up of 5,625 young adults (M = 19.65 years; SD = 2.53; 38.5% males). Study of the internal structure, using confirmatory factor analysis (CFA), revealed that SPQ-BR items were grouped in a theoretical internal structure of nine first-order factors. Moreover, three or four second-order factor and bifactor models showed adequate goodness-of-fit indices. Multigroup CFA showed that the nine lower-order factor models of the SPQ-BR had configural and weak measurement invariance and partial strong measurement invariance across country. The reliability of the SPQ-BR scores, estimated with omega, ranged from 0.67 to 0.91. Using the item response theory framework, the SPQ-BR provides more accurate information at the medium and high end of the latent trait. Statistically significant differences were found in the raw scores of the SPQ-BR subscales and dimensions across samples. The American group scored higher than the Spanish group in all SPQ-BR domains except Ideas of Reference and Suspiciousness. The finding of comparable factor structure in cross-cultural samples would lend further support to the continuum model of psychosis spectrum disorders. In addition, these results provide new information about the factor structure of schizotypal traits and support the validity and utility of this measure in cross-cultural research.

[Survey on the satisfaction regarding their studies and the health habits of nursing students in France].

PubMed

Lamaurt, Florence; Estryn-Behar, Madeleine; Le Moël, Romain; Chrétien, Thomas; Mathieu, Béatrice

2011-06-01

The French Federation of Nursing Student (FNESI) conducted a study in nursing studies institutions from 6 administrative Regions in order to understand risk factors linked with stress or satisfaction of students. Conducted from september 2008 to june 2009, the response rate was 71.2%. Bivariate analysis were conducted on a sample selected by random of 1450 students, to determine potentials risk factors linked with poorer estimated general health and stress. Students declare more and more frequently stress or poor general health in second and third year of nursing studies. Their life habits are inadequate and do not improve when their knowledge increases: lack of sport practice, tobacco smoke, alcohol consumption, other addictive substances ... Among students who declare a too much supported rhythm of training or a poor quality of training, the majority qualify their health of bad. Practical training is considered by a quarter of first year student and 44% of second and third year students. Existence of "speech groups" and free discussion groups have a major influence on satisfaction or stress and poor general health declaration. This study demonstrated the major influence of good mentorship quality by trained nurses and that this nurse in a tutorial position has to be the same all along the training in each department. These aspects have to be improved in order to attract and retain motivated students.

Optimization of Paclitaxel Containing pH-Sensitive Liposomes By 3 Factor, 3 Level Box-Behnken Design.

PubMed

Rane, Smita; Prabhakar, Bala

2013-07-01

The aim of this study was to investigate the combined influence of 3 independent variables in the preparation of paclitaxel containing pH-sensitive liposomes. A 3 factor, 3 levels Box-Behnken design was used to derive a second order polynomial equation and construct contour plots to predict responses. The independent variables selected were molar ratio phosphatidylcholine:diolylphosphatidylethanolamine (X1), molar concentration of cholesterylhemisuccinate (X2), and amount of drug (X3). Fifteen batches were prepared by thin film hydration method and evaluated for percent drug entrapment, vesicle size, and pH sensitivity. The transformed values of the independent variables and the percent drug entrapment were subjected to multiple regression to establish full model second order polynomial equation. F was calculated to confirm the omission of insignificant terms from the full model equation to derive a reduced model polynomial equation to predict the dependent variables. Contour plots were constructed to show the effects of X1, X2, and X3 on the percent drug entrapment. A model was validated for accurate prediction of the percent drug entrapment by performing checkpoint analysis. The computer optimization process and contour plots predicted the levels of independent variables X1, X2, and X3 (0.99, -0.06, 0, respectively), for maximized response of percent drug entrapment with constraints on vesicle size and pH sensitivity.

Paths to Reading Comprehension in At-Risk Second-Grade Readers

ERIC Educational Resources Information Center

Berninger, Virginia W.; Abbott, Robert D.; Vermeulen, Karin; Fulton, Cynthia M.

2006-01-01

Two studies of second graders at risk for reading disability, which were guided by levels of language and functional reading system theory, focused on reading comprehension in this population. In Study 1 (n = 96), confirmatory factor analysis of five comprehension measures loaded on one factor in both fall and spring of second grade. Phonological…

Robust controller designs for second-order dynamic system: A virtual passive approach

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan; Phan, Minh

1990-01-01

A robust controller design is presented for second-order dynamic systems. The controller is model-independent and itself is a virtual second-order dynamic system. Conditions on actuator and sensor placements are identified for controller designs that guarantee overall closed-loop stability. The dynamic controller can be viewed as a virtual passive damping system that serves to stabilize the actual dynamic system. The control gains are interpreted as virtual mass, spring, and dashpot elements that play the same roles as actual physical elements in stability analysis. Position, velocity, and acceleration feedback are considered. Simple examples are provided to illustrate the physical meaning of this controller design.

Factors Affecting Optimal Surface Roughness of AISI 4140 Steel in Turning Operation Using Taguchi Experiment

NASA Astrophysics Data System (ADS)

Novareza, O.; Sulistiyarini, D. H.; Wiradmoko, R.

2018-02-01

This paper presents the result of using Taguchi method in turning process of medium carbon steel of AISI 4140. The primary concern is to find the optimal surface roughness after turning process. The taguchi method is used to get a combination of factors and factor levels in order to get the optimum surface roughness level. Four important factors with three levels were used in experiment based on Taguchi method. A number of 27 experiments were carried out during the research and analysed using analysis of variance (ANOVA) method. The result of surface finish was determined in Ra type surface roughness. The depth of cut was found to be the most important factors for reducing the surface roughness of AISI 4140 steel. On the contrary, the other important factors i.e. spindle speed and rake side angle of the tool were proven to be less factors that affecting the surface finish. It is interesting to see the effect of coolant composition that gained the second important factors to reduce the roughness. It may need further research to explain this result.

Impact of second-order piezoelectricity on electronic and optical properties of c-plane InxGa1-xN quantum dots: Consequences for long wavelength emitters

NASA Astrophysics Data System (ADS)

Patra, Saroj Kanta; Schulz, Stefan

2017-09-01

In this work, we present a detailed analysis of the second-order piezoelectric effect in c-plane InxGa1-xN/GaN quantum dots and its consequences for electronic and optical properties of these systems. Special attention is paid to the impact of increasing In content x on the results. We find that in general the second-order piezoelectric effect leads to an increase in the electrostatic built-in field. Furthermore, our results show that for an In content ≥30%, this increase in the built-in field has a significant effect on the emission wavelength and the radiative lifetimes. For instance, at 40% In, the radiative lifetime is more than doubled when taking second-order piezoelectricity into account. Overall, our calculations reveal that when designing and describing the electronic and optical properties of c-plane InxGa1-xN/GaN quantum dot based light emitters with high In contents, second-order piezoelectric effects cannot be neglected.

Optical solitons, explicit solutions and modulation instability analysis with second-order spatio-temporal dispersion

NASA Astrophysics Data System (ADS)

Inc, Mustafa; Isa Aliyu, Aliyu; Yusuf, Abdullahi; Baleanu, Dumitru

2017-12-01

This paper obtains the dark, bright, dark-bright or combined optical and singular solitons to the nonlinear Schrödinger equation (NLSE) with group velocity dispersion coefficient and second-order spatio-temporal dispersion coefficient, which arises in photonics and waveguide optics and in optical fibers. The integration algorithm is the sine-Gordon equation method (SGEM). Furthermore, the explicit solutions of the equation are derived by considering the power series solutions (PSS) theory and the convergence of the solutions is guaranteed. Lastly, the modulation instability analysis (MI) is studied based on the standard linear-stability analysis and the MI gain spectrum is obtained.

Drivers of wetland conversion: a global meta-analysis.

PubMed

van Asselen, Sanneke; Verburg, Peter H; Vermaat, Jan E; Janse, Jan H

2013-01-01

Meta-analysis of case studies has become an important tool for synthesizing case study findings in land change. Meta-analyses of deforestation, urbanization, desertification and change in shifting cultivation systems have been published. This present study adds to this literature, with an analysis of the proximate causes and underlying forces of wetland conversion at a global scale using two complementary approaches of systematic review. Firstly, a meta-analysis of 105 case-study papers describing wetland conversion was performed, showing that different combinations of multiple-factor proximate causes, and underlying forces, drive wetland conversion. Agricultural development has been the main proximate cause of wetland conversion, and economic growth and population density are the most frequently identified underlying forces. Secondly, to add a more quantitative component to the study, a logistic meta-regression analysis was performed to estimate the likelihood of wetland conversion worldwide, using globally-consistent biophysical and socioeconomic location factor maps. Significant factors explaining wetland conversion, in order of importance, are market influence, total wetland area (lower conversion probability), mean annual temperature and cropland or built-up area. The regression analyses results support the outcomes of the meta-analysis of the processes of conversion mentioned in the individual case studies. In other meta-analyses of land change, similar factors (e.g., agricultural development, population growth, market/economic factors) are also identified as important causes of various types of land change (e.g., deforestation, desertification). Meta-analysis helps to identify commonalities across the various local case studies and identify which variables may lead to individual cases to behave differently. The meta-regression provides maps indicating the likelihood of wetland conversion worldwide based on the location factors that have determined historic conversions.

Drivers of Wetland Conversion: a Global Meta-Analysis

PubMed Central

van Asselen, Sanneke; Verburg, Peter H.; Vermaat, Jan E.; Janse, Jan H.

2013-01-01

Meta-analysis of case studies has become an important tool for synthesizing case study findings in land change. Meta-analyses of deforestation, urbanization, desertification and change in shifting cultivation systems have been published. This present study adds to this literature, with an analysis of the proximate causes and underlying forces of wetland conversion at a global scale using two complementary approaches of systematic review. Firstly, a meta-analysis of 105 case-study papers describing wetland conversion was performed, showing that different combinations of multiple-factor proximate causes, and underlying forces, drive wetland conversion. Agricultural development has been the main proximate cause of wetland conversion, and economic growth and population density are the most frequently identified underlying forces. Secondly, to add a more quantitative component to the study, a logistic meta-regression analysis was performed to estimate the likelihood of wetland conversion worldwide, using globally-consistent biophysical and socioeconomic location factor maps. Significant factors explaining wetland conversion, in order of importance, are market influence, total wetland area (lower conversion probability), mean annual temperature and cropland or built-up area. The regression analyses results support the outcomes of the meta-analysis of the processes of conversion mentioned in the individual case studies. In other meta-analyses of land change, similar factors (e.g., agricultural development, population growth, market/economic factors) are also identified as important causes of various types of land change (e.g., deforestation, desertification). Meta-analysis helps to identify commonalities across the various local case studies and identify which variables may lead to individual cases to behave differently. The meta-regression provides maps indicating the likelihood of wetland conversion worldwide based on the location factors that have determined historic conversions. PMID:24282580

RELAP-7 Development Updates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Hongbin; Zhao, Haihua; Gleicher, Frederick Nathan

RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory, and is the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 development began in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway of the Light Water Reactor Sustainability (LWRS) program. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. The code is beingmore » developed based on Idaho National Laboratory’s modern scientific software development framework – MOOSE (the Multi-Physics Object-Oriented Simulation Environment). The initial development goal of the RELAP-7 approach focused primarily on the development of an implicit algorithm capable of strong (nonlinear) coupling of the dependent hydrodynamic variables contained in the 1-D/2-D flow models with the various 0-D system reactor components that compose various boiling water reactor (BWR) and pressurized water reactor nuclear power plants (NPPs). During Fiscal Year (FY) 2015, the RELAP-7 code has been further improved with expanded capability to support boiling water reactor (BWR) and pressurized water reactor NPPs analysis. The accumulator model has been developed. The code has also been coupled with other MOOSE-based applications such as neutronics code RattleSnake and fuel performance code BISON to perform multiphysics analysis. A major design requirement for the implicit algorithm in RELAP-7 is that it is capable of second-order discretization accuracy in both space and time, which eliminates the traditional first-order approximation errors. The second-order temporal is achieved by a second-order backward temporal difference, and the one-dimensional second-order accurate spatial discretization is achieved with the Galerkin approximation of Lagrange finite elements. During FY-2015, we have done numerical verification work to verify that the RELAP-7 code indeed achieves 2nd-order accuracy in both time and space for single phase models at the system level.« less

Factor structure of the Child Health Questionnaire Parent Form-50 and predictors of health-related quality of life in children with epilepsy.

PubMed

Ferro, Mark A; Landgraf, Jeanne M; Speechley, Kathy N

2013-10-01

The present study investigated the higher-order summary factor structure of the Child Health Questionnaire Parent Form-50 (CHQ) in a sample of children with new-onset epilepsy. The secondary aim was to identify risk factors predicting health-related quality of life (HRQL) 24 months post-diagnosis. Data came from the Health-related Quality of Life in Children with Epilepsy Study (HERQULES, N = 374), a multi-site study documenting HRQL among children with epilepsy from diagnosis through 24 months. Confirmatory factor analysis was used to determine goodness of fit between the original structure of the CHQ and HERQULES data. Multiple regression was used to identify risk factors at diagnosis for HRQL at 24 months. The models demonstrated good fit: baseline: CFI = 0.945; TLI = 0.941; WRMR = 1.461; RMSEA = 0.058; 24 months: CFI = 0.957; TLI = 0.954; WRMR = 1.393; RMSEA = 0.055. Factor loadings were high and no cross-loadings observed (first order: λ = 0.27-0.99, 0.24-0.98; second order: λ = 0.69-0.86, 0.54-0.92; p < 0.001 for all). Controlling for HRQL at diagnosis, predictors for better 24-month HRQL were as follows: physical health: fewer cognitive problems (p = 0.023) and parents with fewer depressive symptoms (p = 0.049); psychosocial health: older parent age (p = 0.043), fewer behavior problems (p = 0.004), and families with better functioning (p = 0.008) and fewer demands (p = 0.009). The CHQ higher-order summary factor structure was replicated in a sample of children with new-onset epilepsy, and child and family risk factors at diagnosis were found to predict HRQL 24 months post-diagnosis. These findings suggest it is possible to identify at-risk children early in the illness process and provide impetus for adopting family-centered care practices.

Assessment of MCRM Boost Assist from Orbit for Deep Space Missions

NASA Technical Reports Server (NTRS)

2000-01-01

Report provides results of analysis for the beamed energy driven MHD Chemical Rocket Motor (MCRM) for application to boost from orbit to escape for deep space and interplanetary missions. Parametric analyses were performed in the mission to determine operating regime for which the MCRM provides significant propulsion performance enhancement. Analysis of the MHD accelerator was performed numerical computational methods to determine design and operational features necessary to achieve Isp on the order of 2,000 to 3,000 seconds. Algorithms were developed to scale weights for the accelerator and power supply. Significant improvement in propulsion system performance can be achieved with the beamed energy driven MCRM. The limiting factor on achievable vehicle acceleration is the specific power of the rectenna.

Adsorption capacity of Curcuma longa for the removal of basic green 1 dye--equilibrium, kinetics and thermodynamic study.

PubMed

Roopavathi, K V; Shanthakumar, S

2016-09-01

In the present study, Curcuma longa (turmeric plant) was used as an adsorbent to remove Basic Green 1 (BG) dye. Batch study was carried out to evaluate the adsorption potential of C. longa and influencing factors such as pH (4-10), adsorbent dose (0.2-5 g l-1), initial dye concentration (50-250 mg l-1) and temperature (30-50°C) on dye removal were analysed. The characterisation of adsorbent was carried out using fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and Brunauer, Emmett and Teller (BET) method. Isotherm models that included Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich, and kinetic models such as pseudo first order, pseudo second-order, Elovich and intraparticle diffusion models were studied. A maximum removal percentage (82.76%) of BG dye from aqueous solution was obtained with optimum conditions of pH 7, 1g l-1 adsorbent dose and 30°C temperature, for 100 mg l-1 initial dye concentration. The equilibrium and kinetic study revealed that the experimental data fitted suitably the Freundlich isotherm and Pseudo second order kinetic model. Thermodynamic analysis proved that adsorption system in this study was spontaneous, feasible and endothermic in nature.

Stability analysis for acoustic wave propagation in tilted TI media by finite differences

NASA Astrophysics Data System (ADS)

Bakker, Peter M.; Duveneck, Eric

2011-05-01

Several papers in recent years have reported instabilities in P-wave modelling, based on an acoustic approximation, for inhomogeneous transversely isotropic media with tilted symmetry axis (TTI media). In particular, instabilities tend to occur if the axis of symmetry varies rapidly in combination with strong contrasts of medium parameters, which is typically the case at the foot of a steeply dipping salt flank. In a recent paper, we have proposed and demonstrated a P-wave modelling approach for TTI media, based on rotated stress and strain tensors, in which the wave equations reduce to a coupled set of two second-order partial differential equations for two scalar stress components: a normal component along the variable axis of symmetry and a lateral component of stress in the plane perpendicular to that axis. Spatially constant density is assumed in this approach. A numerical discretization scheme was proposed which uses discrete second-derivative operators for the non-mixed second-order derivatives in the wave equations, and combined first-derivative operators for the mixed second-order derivatives. This paper provides a complete and rigorous stability analysis, assuming a uniformly sampled grid. Although the spatial discretization operator for the TTI acoustic wave equation is not self-adjoint, this operator still defines a complete basis of eigenfunctions of the solution space, provided that the solution space is somewhat restricted at locations where the medium is elliptically anisotropic. First, a stability analysis is given for a discretization scheme, which is purely based on first-derivative operators. It is shown that the coefficients of the central difference operators should satisfy certain conditions. In view of numerical artefacts, such a discretization scheme is not attractive, and the non-mixed second-order derivatives of the wave equation are discretized directly by second-derivative operators. It is shown that this modification preserves stability, provided that the central difference operators of the second-order derivatives dominate over the twice applied operators of the first-order derivatives. In practice, it turns out that this is almost the case. Stability of the desired discretization scheme is enforced by slightly weighting down the mixed second-order derivatives in the wave equation. This has a minor, practically negligible, effect on the kinematics of wave propagation. Finally, it is shown that non-reflecting boundary conditions, enforced by applying a taper at the boundaries of the grid, do not harm the stability of the discretization scheme.

A needs analysis method for land-use planning of illegal dumping sites: a case study in Aomori-Iwate, Japan.

PubMed

Ishii, Kazuei; Furuichi, Toru; Nagao, Yukari

2013-02-01

Land use at contaminated sites, following remediation, is often needed for regional redevelopment. However, there exist few methods of developing economically and socially feasible land-use plans based on regional needs because of the wide variety of land-use requirements. This study proposes a new needs analysis method for the conceptual land-use planning of contaminated sites and illustrates this method with a case study of an illegal dumping site for hazardous waste. In this method, planning factors consisting of the land-use attributes and related facilities are extracted from the potential needs of the residents through a preliminary questionnaire. Using the extracted attributes of land use and the related facilities, land-use cases are designed for selection-based conjoint analysis. A second questionnaire for respondents to the first one who indicated an interest in participating in the second questionnaire is conducted for the conjoint analysis to determine the utility function and marginal cost of each attribute in order to prioritize the planning factors to develop a quantitative and economically and socially feasible land-use plan. Based on the results, site-specific land-use alternatives are developed and evaluated by the utility function obtained from the conjoint analysis. In this case study of an illegal dumping site for hazardous waste, the uses preferred as part of a conceptual land-use plan following remediation of the site were (1) agricultural land and a biogas plant designed to recover energy from biomass or (2) a park with a welfare facility and an athletic field. Our needs analysis method with conjoint analysis is applicable to the development of conceptual land-use planning for similar sites following remediation, particularly when added value is considered. Copyright © 2012 Elsevier Ltd. All rights reserved.

Trait sexual motivation questionnaire: concept and validation.

PubMed

Stark, Rudolf; Kagerer, Sabine; Walter, Bertram; Vaitl, Dieter; Klucken, Tim; Wehrum-Osinsky, Sina

2015-04-01

Trait sexual motivation defines a psychological construct that reflects the long-lasting degree of motivation for sexual activities, which is assumed to be the result of biological and sociocultural influences. With this definition, it shares commonalities with other sexuality-related constructs like sexual desire, sexual drive, sexual needs, and sexual compulsivity. The Trait Sexual Motivation Questionnaire (TSMQ) was developed in order to measure trait sexual motivation with its different facets. Several steps were conducted: First, items were composed assessing sexual desire, the effort made to gain sex, as well as specific sexual behaviors. Factor analysis of the data of a first sample (n = 256) was conducted. Second, the factor solution was verified by a confirmatory factor analysis in a second sample (n = 498) and construct validity was demonstrated. Third, the temporal stability of the TSMQ was tested in a third study (n = 59). Questionnaire data. The exploratory and confirmatory factor analyses revealed that trait sexual motivation is best characterized by four subscales: Solitary Sexuality, Importance of Sex, Seeking Sexual Encounters, and Comparison with Others. It could be shown that the test quality of the questionnaire is high. Most importantly for the trait concept, the retest reliability after 1 year was r = 0.87. Our results indicate that the TSMQ is indeed a suitable tool for measuring long-lasting sexual motivation with high test quality and high construct validity. A future differentiation between trait and state sexual motivation might be helpful for clinical as well as forensic research. © 2015 International Society for Sexual Medicine.

Second-order processing of four-stroke apparent motion.

PubMed

Mather, G; Murdoch, L

1999-05-01

In four-stroke apparent motion displays, pattern elements oscillate between two adjacent positions and synchronously reverse in contrast, but appear to move unidirectionally. For example, if rightward shifts preserve contrast but leftward shifts reverse contrast, consistent rightward motion is seen. In conventional first-order displays, elements reverse in luminance contrast (e.g. light elements become dark, and vice-versa). The resulting perception can be explained by responses in elementary motion detectors turned to spatio-temporal orientation. Second-order motion displays contain texture-defined elements, and there is some evidence that they excite second-order motion detectors that extract spatio-temporal orientation following the application of a non-linear 'texture-grabbing' transform by the visual system. We generated a variety of second-order four-stroke displays, containing texture-contrast reversals instead of luminance contrast reversals, and used their effectiveness as a diagnostic test for the presence of various forms of non-linear transform in the second-order motion system. Displays containing only forward or only reversed phi motion sequences were also tested. Displays defined by variation in luminance, contrast, orientation, and size were effective. Displays defined by variation in motion, dynamism, and stereo were partially or wholly ineffective. Results obtained with contrast-reversing and four-stroke displays indicate that only relatively simple non-linear transforms (involving spatial filtering and rectification) are available during second-order energy-based motion analysis.

Affordability of residential water tariffs: alternative measurement and explanatory factors in southern Spain.

PubMed

García-Valiñas, Maria A; Martínez-Espiñeira, Roberto; González-Gómez, Francisco

2010-12-01

Using information on a basic or "lifeline" level of domestic water use obtained from a water demand function based on a Stone-Geary utility function, a minimum water threshold of 128 m(3) per household per year was estimated in a sample of municipalities in Southern Spain. As a second objective, water affordability indexes were then calculated that relate the cost of such lifeline to average municipal income levels. The analysis of the factors behind the differences in that ratio across Andalusian municipalities shows that the relative cost of purchasing the lifeline appears inversely related to average income levels, revealing an element of regressivity in the component of water tariffs affecting the least superfluous part of the household's consumption. The main policy recommendation would involve redesigning water tariffs in order to improve access for lower income households to an amount of water sufficient to cover their basic needs. The proposed methodology could be applied to other geographical areas, both from developed and from developing countries, in order to analyze the degree of progressivity of the water tariffs currently in effect and in order to guide the design of more equitable regulatory policies. Copyright © 2010 Elsevier Ltd. All rights reserved.

Defining the student burnout construct: a structural analysis from three burnout inventories.

PubMed

Maroco, João; Campos, Juliana Alvares Duarte Bonini

2012-12-01

College student burnout has been assessed mainly with the Maslach burnout inventory (MBI). However, the construct's definition and measurement with MBI has drawn several criticisms and new inventories have been suggested for the evaluation of the syndrome. A redefinition of the construct of student burnout is proposed by means of a structural equation model, reflecting burnout as a second order factor defined by factors from the MBI-student survey (MBI-SS); the Copenhagen burnout inventory-student survey (CBI-SS) and the Oldenburg burnout inventory-student survey (OLBI-SS). Standardized regression weights from Burnout to Exhaustion and Cynicism from the MBI-SS scale, personal burnout and studies related burnout from the CBI, and exhaustion and disengagement from OLBI, show that these factors are strong manifestations of students' burnout. For college students, the burnout construct is best defined by two dimensions described as "physical and psychological exhaustion" and "cynicism and disengagement".

A novel application of cultural consensus models to evaluate conservation education programs.

PubMed

Nekaris, K A I; McCabe, Sharon; Spaan, Denise; Ali, Muhammad Imron; Nijman, Vincent

2018-04-01

Conservation professionals recognize the need to evaluate education initiatives with a flexible approach that is culturally appropriate. Cultural-consensus theory (CCT) provides a framework for measuring the extent to which beliefs are communally held and has long been applied by social scientists. In a conservation-education context, we applied CCT and used free lists (i.e., a list of items on a topic stated in order of cultural importance) and domain analysis (analysis of how free lists go together within a cultural group) to evaluate a conservation education program in which we used a children's picture book to increase knowledge about and empathy for a critically endangered mammal, the Javan slow loris (Nycticebus javanicus). We extracted free lists of keywords generated by students (n = 580 in 18 schools) from essays they wrote before and after the education program. In 2 classroom sessions conducted approximately 18 weeks apart, we asked students to write an essay about their knowledge of the target species and then presented a book and several activities about slow loris ecology. Prior to the second session, we asked students to write a second essay. We generated free lists from both essays, quantified salience of terms used, and conducted minimal residuals factor analysis to determine presence of cultural domains surrounding slow lorises in each session. Students increased their use of words accurately associated with slow loris ecology and conservation from 43% in initial essays to 76% in final essays. Domain coherence increased from 22% to 47% across schools. Fifteen factors contributed to the domain slow loris. Between the first and second essays, factors that showed the greatest change were feeding ecology and slow loris as a forest protector, which increased 7-fold, and the humancentric factor, which decreased 5-fold. As demonstrated by knowledge retention and creation of unique stories and conservation opinions, children achieved all six levels of Bloom's taxonomy of learning domains. Free from the constraints of questionnaires and surveys, CCT methods provide a promising avenue to evaluate conservation education programs. © 2017 Society for Conservation Biology.

Asymptotic analysis of discrete schemes for non-equilibrium radiation diffusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cui, Xia, E-mail: cui_xia@iapcm.ac.cn; Yuan, Guang-wei; Shen, Zhi-jun

Motivated by providing well-behaved fully discrete schemes in practice, this paper extends the asymptotic analysis on time integration methods for non-equilibrium radiation diffusion in [2] to space discretizations. Therein studies were carried out on a two-temperature model with Larsen's flux-limited diffusion operator, both the implicitly balanced (IB) and linearly implicit (LI) methods were shown asymptotic-preserving. In this paper, we focus on asymptotic analysis for space discrete schemes in dimensions one and two. First, in construction of the schemes, in contrast to traditional first-order approximations, asymmetric second-order accurate spatial approximations are devised for flux-limiters on boundary, and discrete schemes with second-ordermore » accuracy on global spatial domain are acquired consequently. Then by employing formal asymptotic analysis, the first-order asymptotic-preserving property for these schemes and furthermore for the fully discrete schemes is shown. Finally, with the help of manufactured solutions, numerical tests are performed, which demonstrate quantitatively the fully discrete schemes with IB time evolution indeed have the accuracy and asymptotic convergence as theory predicts, hence are well qualified for both non-equilibrium and equilibrium radiation diffusion. - Highlights: • Provide AP fully discrete schemes for non-equilibrium radiation diffusion. • Propose second order accurate schemes by asymmetric approach for boundary flux-limiter. • Show first order AP property of spatially and fully discrete schemes with IB evolution. • Devise subtle artificial solutions; verify accuracy and AP property quantitatively. • Ideas can be generalized to 3-dimensional problems and higher order implicit schemes.« less

Factors that influence disease-specific quality of life or health status in patients with COPD: a review and meta-analysis of Pearson correlations.

PubMed

Tsiligianni, Ioanna; Kocks, Janwillem; Tzanakis, Nikolaos; Siafakas, Nikolaos; van der Molen, Thys

2011-09-01

A major goal in the management of chronic obstructive pulmonary disease (COPD) is to ensure that the burden of the disease for patients with COPD is limited and that patients will have the best possible quality of life. To explore all the possible factors that could influence disease-specific quality of life and health status in patients with COPD. A systematic review of the literature and a meta-analysis were performed to explore the factors that could have a positive or negative effect on quality of life and/or health status in patients with COPD. Quality of life and health status are determined by certain factors included gender, disease severity indices, lung function parameters, body mass index, smoking, symptoms, co-morbidity, depression, anxiety, and exacerbations. Factors such as dyspnoea, depression, anxiety and exercise tolerance were found to be more correlated with health status than the widely used spirometric values. Forced expiratory volume in one second had a weak to modest Pearson weighted correlation coefficient which ranged from -0.110 to -0.510 depending on the questionnaire used. The broad range of determining factors suggests that, in order to reach the management goals, health status should be measured in addition to lung function in patients with COPD.

Measurement of perceived functions of non-suicidal self-injury for Chinese adolescents.

PubMed

Leong, Choi Hong; Wu, Anise M S; Poon, Mary Man-Yee

2014-01-01

Due to the lack of validated assessment tools for motives of non-suicidal self-injury behaviors in the Chinese contexts, this study aims to evaluate the psychometric properties of the Chinese version of the Functional Assessment of Self-Mutilation (C-FASM). A total of 345 secondary school students (mean age = 11.41 years), who reported non-suicidal self-injury in the past year, voluntarily participated in the questionnaire survey. Confirmatory factor analysis results supported a second-order model of 4 motivational factors. The overall scale scores had significant correlations with depression, anxiety, impulsiveness, self-esteem, social support, and suicidal ideation. The internal consistency of the scale was also satisfactory. The C-FASM is a valid and reliable instrument for assessing non-suicidal self-injury among nonclinical Chinese adolescents.

Linear and non-linear regression analysis for the sorption kinetics of methylene blue onto activated carbon.

PubMed

Kumar, K Vasanth

2006-10-11

Batch kinetic experiments were carried out for the sorption of methylene blue onto activated carbon. The experimental kinetics were fitted to the pseudo first-order and pseudo second-order kinetics by linear and a non-linear method. The five different types of Ho pseudo second-order expression have been discussed. A comparison of linear least-squares method and a trial and error non-linear method of estimating the pseudo second-order rate kinetic parameters were examined. The sorption process was found to follow a both pseudo first-order kinetic and pseudo second-order kinetic model. Present investigation showed that it is inappropriate to use a type 1 and type pseudo second-order expressions as proposed by Ho and Blanachard et al. respectively for predicting the kinetic rate constants and the initial sorption rate for the studied system. Three correct possible alternate linear expressions (type 2 to type 4) to better predict the initial sorption rate and kinetic rate constants for the studied system (methylene blue/activated carbon) was proposed. Linear method was found to check only the hypothesis instead of verifying the kinetic model. Non-linear regression method was found to be the more appropriate method to determine the rate kinetic parameters.

The novel application of Benford's second order analysis for monitoring radiation output in interventional radiology.

PubMed

Cournane, S; Sheehy, N; Cooke, J

2014-06-01

Benford's law is an empirical observation which predicts the expected frequency of digits in naturally occurring datasets spanning multiple orders of magnitude, with the law having been most successfully applied as an audit tool in accountancy. This study investigated the sensitivity of the technique in identifying system output changes using simulated changes in interventional radiology Dose-Area-Product (DAP) data, with any deviations from Benford's distribution identified using z-statistics. The radiation output for interventional radiology X-ray equipment is monitored annually during quality control testing; however, for a considerable portion of the year an increased output of the system, potentially caused by engineering adjustments or spontaneous system faults may go unnoticed, leading to a potential increase in the radiation dose to patients. In normal operation recorded examination radiation outputs vary over multiple orders of magnitude rendering the application of normal statistics ineffective for detecting systematic changes in the output. In this work, the annual DAP datasets complied with Benford's first order law for first, second and combinations of the first and second digits. Further, a continuous 'rolling' second order technique was devised for trending simulated changes over shorter timescales. This distribution analysis, the first employment of the method for radiation output trending, detected significant changes simulated on the original data, proving the technique useful in this case. The potential is demonstrated for implementation of this novel analysis for monitoring and identifying change in suitable datasets for the purpose of system process control. Copyright © 2013 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Generalized M-factor of hollow Gaussian beams through a hard-edge circular aperture

NASA Astrophysics Data System (ADS)

Deng, Dongmei

2005-06-01

Based on the generalized truncated second-order moments, the generalized M-factor (MG2-factor) of three-dimensional hollow Gaussian beams (HGBs) through a hard-edge circular aperture is studied in cylindrical coordinate system analytically and numerically. The closed-form expression for the MG2-factor of the truncated HGBs, which is dependent on the truncation parameter β and the beam order n, can be simplified to that of the truncated, the untruncated Gaussian beams and the untruncated HGBs. Also, the power fraction is demonstrated analytically and numerically, which shows that the area of the dark region across the HGBs increases as n increasing.

High-order interactions observed in multi-task intrinsic networks are dominant indicators of aberrant brain function in schizophrenia

PubMed Central

Plis, Sergey M; Sui, Jing; Lane, Terran; Roy, Sushmita; Clark, Vincent P; Potluru, Vamsi K; Huster, Rene J; Michael, Andrew; Sponheim, Scott R; Weisend, Michael P; Calhoun, Vince D

2013-01-01

Identifying the complex activity relationships present in rich, modern neuroimaging data sets remains a key challenge for neuroscience. The problem is hard because (a) the underlying spatial and temporal networks may be nonlinear and multivariate and (b) the observed data may be driven by numerous latent factors. Further, modern experiments often produce data sets containing multiple stimulus contexts or tasks processed by the same subjects. Fusing such multi-session data sets may reveal additional structure, but raises further statistical challenges. We present a novel analysis method for extracting complex activity networks from such multifaceted imaging data sets. Compared to previous methods, we choose a new point in the trade-off space, sacrificing detailed generative probability models and explicit latent variable inference in order to achieve robust estimation of multivariate, nonlinear group factors (“network clusters”). We apply our method to identify relationships of task-specific intrinsic networks in schizophrenia patients and control subjects from a large fMRI study. After identifying network-clusters characterized by within- and between-task interactions, we find significant differences between patient and control groups in interaction strength among networks. Our results are consistent with known findings of brain regions exhibiting deviations in schizophrenic patients. However, we also find high-order, nonlinear interactions that discriminate groups but that are not detected by linear, pair-wise methods. We additionally identify high-order relationships that provide new insights into schizophrenia but that have not been found by traditional univariate or second-order methods. Overall, our approach can identify key relationships that are missed by existing analysis methods, without losing the ability to find relationships that are known to be important. PMID:23876245

Evidence of validity of the Stress-Producing Life Events (SPLE) instrument.

PubMed

Rizzini, Marta; Santos, Alcione Miranda Dos; Silva, Antônio Augusto Moura da

2018-01-01

OBJECTIVE Evaluate the construct validity of a list of eight Stressful Life Events in pregnant women. METHODS A cross-sectional study was conducted with 1,446 pregnant women in São Luís, MA, and 1,364 pregnant women in Ribeirão Preto, SP (BRISA cohort), from February 2010 to June 2011. In the exploratory factorial analysis, the promax oblique rotation was used and for the calculation of the internal consistency, we used the compound reliability. The construct validity was determined by means of the confirmatory factorial analysis with the method of estimation of weighted least squares adjusted by the mean and variance. RESULTS The model with the best fit in the exploratory analysis was the one that retained three factors with a cumulative variance of 61.1%. The one-factor model did not obtain a good fit in both samples in the confirmatory analysis. The three-factor model called Stress-Producing Life Events presented a good fit (RMSEA < 0.05; CFI/TLI > 0.90) for both samples. CONCLUSIONS The Stress-Producing Life Events constitute a second order construct with three dimensions related to health, personal and financial aspects and violence. This study found evidence that confirms the construct validity of a list of stressor events, entitled Stress-Producing Life Events Inventory.

Explaining the "Natural Order of L2 Morpheme Acquisition" in English: A Meta-Analysis of Multiple Determinants

ERIC Educational Resources Information Center

Goldschneider, Jennifer M.; DeKeyser, Robert M.

2005-01-01

This meta-analysis pools data from 25 years of research on the order of acquisition of English grammatical morphemes by students of English as a second language (ESL). Some researchers have posited a "natural" order of acquisition common to all ESL learners, but no single cause has been shown for this phenomenon. Our study investigated…

Behavior Rating Inventory of Executive Functioning-Preschool (BRIEF-P) Applied to Teachers: Psychometric Properties and Usefulness for Disruptive Disorders in 3-Year-Old Preschoolers.

PubMed

Ezpeleta, Lourdes; Granero, Roser; Penelo, Eva; de la Osa, Núria; Domènech, Josep M

2015-06-01

We provide validation data on the Behavior Rating Inventory of Executive Functioning-Preschool version (BRIEF-P) in preschool children. Teachers of a community sample of six hundred and twenty 3-year-olds, who were followed up at age 4, responded to the BRIEF-P, and parents and children answered different psychological measures. Confirmatory factor analysis achieved adequate fit of the original structure (five-first-order-factor plus three-second-order-factor model) after excluding four items. The derived dimensions obtained satisfactory internal consistency, moderate convergent validity with psychopathology and temperament, and good ability to discriminate between children with ADHD. BRIEF-P scales were not associated with a performance-based measure of attention. The teacher's BRIEF-P adds significant clinical information for the diagnosis of ADHD (ΔR(2) from 5.3 to 15.3) when used with other instruments for the assessment of psychopathology, functional impairment, or performance-based attention. The BRIEF-P may be useful in the identification of preschool children, specifically those with ADHD, who might have a dysfunction in executive functioning. © 2012 SAGE Publications.

Development of Advanced Methods of Structural and Trajectory Analysis for Transport Aircraft

NASA Technical Reports Server (NTRS)

Ardema, Mark D.; Windhorst, Robert; Phillips, James

1998-01-01

This paper develops a near-optimal guidance law for generating minimum fuel, time, or cost fixed-range trajectories for supersonic transport aircraft. The approach uses a choice of new state variables along with singular perturbation techniques to time-scale decouple the dynamic equations into multiple equations of single order (second order for the fast dynamics). Application of the maximum principle to each of the decoupled equations, as opposed to application to the original coupled equations, avoids the two point boundary value problem and transforms the problem from one of a functional optimization to one of multiple function optimizations. It is shown that such an approach produces well known aircraft performance results such as minimizing the Brequet factor for minimum fuel consumption and the energy climb path. Furthermore, the new state variables produce a consistent calculation of flight path angle along the trajectory, eliminating one of the deficiencies in the traditional energy state approximation. In addition, jumps in the energy climb path are smoothed out by integration of the original dynamic equations at constant load factor. Numerical results performed for a supersonic transport design show that a pushover dive followed by a pullout at nominal load factors are sufficient maneuvers to smooth the jump.

Rogue wave solutions for the infinite integrable nonlinear Schrödinger equation hierarchy.

PubMed

Ankiewicz, A; Akhmediev, N

2017-07-01

We present rogue wave solutions of the integrable nonlinear Schrödinger equation hierarchy with an infinite number of higher-order terms. The latter include higher-order dispersion and higher-order nonlinear terms. In particular, we derive the fundamental rogue wave solutions for all orders of the hierarchy, with exact expressions for velocities, phase, and "stretching factors" in the solutions. We also present several examples of exact solutions of second-order rogue waves, including rogue wave triplets.

An Assessment of the Quantitative Literacy of Undergraduate Students

ERIC Educational Resources Information Center

Wilkins, Jesse L. M.

2016-01-01

Quantitative literacy (QLT) represents an underlying higher-order construct that accounts for a person's willingness to engage in quantitative situations in everyday life. The purpose of this study is to retest the construct validity of a model of quantitative literacy (Wilkins, 2010). In this model, QLT represents a second-order factor that…

First- and Second-Order Sensitivity Analysis of a P-Version Finite Element Equation Via Automatic Differentiation

NASA Technical Reports Server (NTRS)

Hou, Gene

1998-01-01

Sensitivity analysis is a technique for determining derivatives of system responses with respect to design parameters. Among many methods available for sensitivity analysis, automatic differentiation has been proven through many applications in fluid dynamics and structural mechanics to be an accurate and easy method for obtaining derivatives. Nevertheless, the method can be computational expensive and can require a high memory space. This project will apply an automatic differentiation tool, ADIFOR, to a p-version finite element code to obtain first- and second- order then-nal derivatives, respectively. The focus of the study is on the implementation process and the performance of the ADIFOR-enhanced codes for sensitivity analysis in terms of memory requirement, computational efficiency, and accuracy.

Delayed bleeding and hemorrhage of mucosal defects after gastric endoscopic submucosal dissection on second-look endoscopy.

PubMed

Ono, Shoko; Ono, Masayoshi; Nakagawa, Manabu; Shimizu, Yuichi; Kato, Mototsugu; Sakamoto, Naoya

2016-04-01

Although second-look endoscopy is performed within several days after gastric endoscopic submucosal dissection (ESD), there has been no evidence supporting the usefulness of the intervention. We investigated the relationship between delayed bleeding and hemorrhage of mucosal defects after ESD on second-look endoscopy and analyzed risk factors of active bleeding on second-look endoscopy. A total of 441 consecutive ESD cases with gastric cancer or adenoma were retrospectively analyzed. Second-look endoscopy was performed in the morning after the day of ESD. Bleeding of mucosal defects on second-look endoscopy was classified according to the Forrest classification, and active bleeding was defined as Forrest Ia or Ib. Delayed bleeding was defined as hematemesis or melena after second-look endoscopy. A total of 406 second-look endoscopies were performed, and delayed bleeding occurred in 11 patients. The incidence rate of delayed bleeding after second-look endoscopy in patients with Forrest Ia or Ib was significantly higher than that in patients with Forrest IIa, IIb or III (7.69 vs. 2.02 %, p < 0.05). Complication of a histological ulcer, large size of the resected specimen and long ESD procedure time were shown to be risk factors for hemorrhage of mucosal defects after ESD on second-look endoscopy by univariate analysis. Multivariate analysis indicated that only large size of the resected specimen was a risk factor. In a specimen size of >35 mm, the odds ratio of active bleeding on second-look endoscopy was 1.9. Active bleeding of mucosal defects on second-look endoscopy is a risk factor for delayed bleeding.

Breather solutions of a fourth-order nonlinear Schrödinger equation in the degenerate, soliton, and rogue wave limits

NASA Astrophysics Data System (ADS)

Chowdury, Amdad; Krolikowski, Wieslaw; Akhmediev, N.

2017-10-01

We present one- and two-breather solutions of the fourth-order nonlinear Schrödinger equation. With several parameters to play with, the solution may take a variety of forms. We consider most of these cases including the general form and limiting cases when the modulation frequencies are 0 or coincide. The zero-frequency limit produces a combination of breather-soliton structures on a constant background. The case of equal modulation frequencies produces a degenerate solution that requires a special technique for deriving. A zero-frequency limit of this degenerate solution produces a rational second-order rogue wave solution with a stretching factor involved. Taking, in addition, the zero limit of the stretching factor transforms the second-order rogue waves into a soliton. Adding a differential shift in the degenerate solution results in structural changes in the wave profile. Moreover, the zero-frequency limit of the degenerate solution with differential shift results in a rogue wave triplet. The zero limit of the stretching factor in this solution, in turn, transforms the triplet into a singlet plus a low-amplitude soliton on the background. A large value of the differential shift parameter converts the triplet into a pure singlet.

Breather solutions of a fourth-order nonlinear Schrödinger equation in the degenerate, soliton, and rogue wave limits.

PubMed

Chowdury, Amdad; Krolikowski, Wieslaw; Akhmediev, N

2017-10-01

We present one- and two-breather solutions of the fourth-order nonlinear Schrödinger equation. With several parameters to play with, the solution may take a variety of forms. We consider most of these cases including the general form and limiting cases when the modulation frequencies are 0 or coincide. The zero-frequency limit produces a combination of breather-soliton structures on a constant background. The case of equal modulation frequencies produces a degenerate solution that requires a special technique for deriving. A zero-frequency limit of this degenerate solution produces a rational second-order rogue wave solution with a stretching factor involved. Taking, in addition, the zero limit of the stretching factor transforms the second-order rogue waves into a soliton. Adding a differential shift in the degenerate solution results in structural changes in the wave profile. Moreover, the zero-frequency limit of the degenerate solution with differential shift results in a rogue wave triplet. The zero limit of the stretching factor in this solution, in turn, transforms the triplet into a singlet plus a low-amplitude soliton on the background. A large value of the differential shift parameter converts the triplet into a pure singlet.

Psychometric Properties of the Obsessive-Compulsive Inventory-Child Version (OCI-CV) in Chilean Children and Adolescents

PubMed Central

Martínez-González, Agustín E.; Rodríguez-Jiménez, Tíscar; Piqueras, José A.; Vera-Villarroel, Pablo; Godoy, Antonio

2015-01-01

In recent years, there has been a considerable increase in the development of assessment tools for obsessive-compulsive symptomatology in children and adolescents. The Obsessive Compulsive Inventory-Child Version (OCI-CV) is a well-established assessment self-report, with special interest for the assessment of dimensions of Obsessive Compulsive Disorder (OCD). This instrument has shown to be useful for clinical and non-clinical populations in two languages (English and European Spanish). Thus, the aim of this study was to analyze the psychometric properties of the OCI-CV in a Chilean community sample. The sample consisted of 816 children and adolescents with a mean age of 14.54 years (SD = 2.21; range = 10–18 years). Factor structure, internal consistency, test-retest reliability, convergent/divergent validity, and gender/age differences were examined. Confirmatory factor analysis showed a 6-factor structure (Doubting/Checking, Obsessing, Hoarding, Washing, Ordering, and Neutralizing) with one second-order factor. Good estimates of reliability (including internal consistency and test-retest), evidence supporting the validity, and small age and gender differences (higher levels of OCD symptomatology among older participants and women, respectively) are found. The OCI-CV is also an adequate scale for the assessment of obsessions and compulsions in a general population of Chilean children and adolescents. PMID:26317404

The development of measures of organizational citizenship behaviour and changes in job behaviours related to quality management in health care.

PubMed

Irvine, D

1995-08-01

A study was conducted at two tertiary care hospitals in Canada for the purpose of developing instruments to measure organizational citizenship behaviours (OCB) and changes in job behaviours that occur as a result of participation on hospital quality improvement (CQI) teams. Semi structured interviews were conducted among 52 hospital employees in order to elicit critical incidents of OCB and changes in job behaviours related to CQI. The results of the staff interviews were used to develop a measure of OCB in the hospital setting, and a measure of changes in job behaviours related to CQI. 39 employees, who were drawn from the major departments within the two hospitals on the basis of their membership on CQI teams, participated in a test of the psychometric properties of the two research instruments. Exploratory factor analysis, employing an orthogonal rotation, yielded two factors that accounted for 30% of the variation among the OCB items. The Cronbach alpha for items loading highly on the first factor was .88. The factor was labelled 'OCB directed towards individuals within the organization'. This factor was dominated by items reflecting the kinds of extra-role job behaviours employees engage in to assist patients, family members, visitors, and other employees within the organization. The Cronbach alpha for items loading highly on the second factor was 0.71. The second factor was labelled 'organizationally directed OCB', and consisted of behaviours that reflected an impersonal form of OCB in the hospital setting. Factor analysis, employing an orthogonal rotation, yielded four factors that accounted for 48% of the variation among the items measuring changes in job behaviours related to CQI. The four factors were labelled 'problem-solving', Cronbach alpha 0.82; 'customer awareness', Cronbach alpha 0.79; 'use of CQI knowledge', Cronbach alpha 0.77; and 'organizational interests', Cronbach alpha 0.79. The two OCB factors were moderately correlated, there were no significant correlations among any of the factors measuring changes in job behaviours related to CQI, and the problem-solving job behaviours factor was moderately correlated with the two OCB factors. Directions for future research are discussed.

Efficiency of perfectly matched layers for seismic wave modeling in second-order viscoelastic equations

NASA Astrophysics Data System (ADS)

Ping, Ping; Zhang, Yu; Xu, Yixian; Chu, Risheng

2016-12-01

In order to improve the perfectly matched layer (PML) efficiency in viscoelastic media, we first propose a split multi-axial PML (M-PML) and an unsplit convolutional PML (C-PML) in the second-order viscoelastic wave equations with the displacement as the only unknown. The advantage of these formulations is that it is easy and efficient to revise the existing codes of the second-order spectral element method (SEM) or finite-element method (FEM) with absorbing boundaries in a uniform equation, as well as more economical than the auxiliary differential equations PML. Three models which are easily suffered from late time instabilities are considered to validate our approaches. Through comparison the M-PML with C-PML efficiency of absorption and stability for long time simulation, it can be concluded that: (1) for an isotropic viscoelastic medium with high Poisson's ratio, the C-PML will be a sufficient choice for long time simulation because of its weak reflections and superior stability; (2) unlike the M-PML with high-order damping profile, the M-PML with second-order damping profile loses its stability in long time simulation for an isotropic viscoelastic medium; (3) in an anisotropic viscoelastic medium, the C-PML suffers from instabilities, while the M-PML with second-order damping profile can be a better choice for its superior stability and more acceptable weak reflections than the M-PML with high-order damping profile. The comparative analysis of the developed methods offers meaningful significance for long time seismic wave modeling in second-order viscoelastic wave equations.

Maxwell's second- and third-order equations of transfer for non-Maxwellian gases

NASA Technical Reports Server (NTRS)

Baganoff, D.

1992-01-01

Condensed algebraic forms for Maxwell's second- and third-order equations of transfer are developed for the case of molecules described by either elastic hard spheres, inverse-power potentials, or by Bird's variable hard-sphere model. These hardly reduced, yet exact, equations provide a new point of origin, when using the moment method, in seeking approximate solutions in the kinetic theory of gases for molecular models that are physically more realistic than that provided by the Maxwell model. An important by-product of the analysis when using these second- and third-order relations is that a clear mathematical connection develops between Bird's variable hard-sphere model and that for the inverse-power potential.

A dual-input nonlinear system analysis of autonomic modulation of heart rate

NASA Technical Reports Server (NTRS)

Chon, K. H.; Mullen, T. J.; Cohen, R. J.

1996-01-01

Linear analyses of fluctuations in heart rate and other hemodynamic variables have been used to elucidate cardiovascular regulatory mechanisms. The role of nonlinear contributions to fluctuations in hemodynamic variables has not been fully explored. This paper presents a nonlinear system analysis of the effect of fluctuations in instantaneous lung volume (ILV) and arterial blood pressure (ABP) on heart rate (HR) fluctuations. To successfully employ a nonlinear analysis based on the Laguerre expansion technique (LET), we introduce an efficient procedure for broadening the spectral content of the ILV and ABP inputs to the model by adding white noise. Results from computer simulations demonstrate the effectiveness of broadening the spectral band of input signals to obtain consistent and stable kernel estimates with the use of the LET. Without broadening the band of the ILV and ABP inputs, the LET did not provide stable kernel estimates. Moreover, we extend the LET to the case of multiple inputs in order to accommodate the analysis of the combined effect of ILV and ABP effect on heart rate. Analyzes of data based on the second-order Volterra-Wiener model reveal an important contribution of the second-order kernels to the description of the effect of lung volume and arterial blood pressure on heart rate. Furthermore, physiological effects of the autonomic blocking agents propranolol and atropine on changes in the first- and second-order kernels are also discussed.

Second-Order Sensitivity Analysis of Uncollided Particle Contributions to Radiation Detector Responses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cacuci, Dan G.; Favorite, Jeffrey A.

This work presents an application of Cacuci’s Second-Order Adjoint Sensitivity Analysis Methodology (2nd-ASAM) to the simplified Boltzmann equation that models the transport of uncollided particles through a medium to compute efficiently and exactly all of the first- and second-order derivatives (sensitivities) of a detector’s response with respect to the system’s isotopic number densities, microscopic cross sections, source emission rates, and detector response function. The off-the-shelf PARTISN multigroup discrete ordinates code is employed to solve the equations underlying the 2nd-ASAM. The accuracy of the results produced using PARTISN is verified by using the results of three test configurations: (1) a homogeneousmore » sphere, for which the response is the exactly known total uncollided leakage, (2) a multiregion two-dimensional (r-z) cylinder, and (3) a two-region sphere for which the response is a reaction rate. For the homogeneous sphere, results for the total leakage as well as for the respective first- and second-order sensitivities are in excellent agreement with the exact benchmark values. For the nonanalytic problems, the results obtained by applying the 2nd-ASAM to compute sensitivities are in excellent agreement with central-difference estimates. The efficiency of the 2nd-ASAM is underscored by the fact that, for the cylinder, only 12 adjoint PARTISN computations were required by the 2nd-ASAM to compute all of the benchmark’s 18 first-order sensitivities and 224 second-order sensitivities, in contrast to the 877 PARTISN calculations needed to compute the respective sensitivities using central finite differences, and this number does not include the additional calculations that were required to find appropriate values of the perturbations to use for the central differences.« less

Second-Order Sensitivity Analysis of Uncollided Particle Contributions to Radiation Detector Responses

DOE PAGES

Cacuci, Dan G.; Favorite, Jeffrey A.

2018-04-06

This work presents an application of Cacuci’s Second-Order Adjoint Sensitivity Analysis Methodology (2nd-ASAM) to the simplified Boltzmann equation that models the transport of uncollided particles through a medium to compute efficiently and exactly all of the first- and second-order derivatives (sensitivities) of a detector’s response with respect to the system’s isotopic number densities, microscopic cross sections, source emission rates, and detector response function. The off-the-shelf PARTISN multigroup discrete ordinates code is employed to solve the equations underlying the 2nd-ASAM. The accuracy of the results produced using PARTISN is verified by using the results of three test configurations: (1) a homogeneousmore » sphere, for which the response is the exactly known total uncollided leakage, (2) a multiregion two-dimensional (r-z) cylinder, and (3) a two-region sphere for which the response is a reaction rate. For the homogeneous sphere, results for the total leakage as well as for the respective first- and second-order sensitivities are in excellent agreement with the exact benchmark values. For the nonanalytic problems, the results obtained by applying the 2nd-ASAM to compute sensitivities are in excellent agreement with central-difference estimates. The efficiency of the 2nd-ASAM is underscored by the fact that, for the cylinder, only 12 adjoint PARTISN computations were required by the 2nd-ASAM to compute all of the benchmark’s 18 first-order sensitivities and 224 second-order sensitivities, in contrast to the 877 PARTISN calculations needed to compute the respective sensitivities using central finite differences, and this number does not include the additional calculations that were required to find appropriate values of the perturbations to use for the central differences.« less

A critical analysis of some popular methods for the discretisation of the gradient operator in finite volume methods

NASA Astrophysics Data System (ADS)

Syrakos, Alexandros; Varchanis, Stylianos; Dimakopoulos, Yannis; Goulas, Apostolos; Tsamopoulos, John

2017-12-01

Finite volume methods (FVMs) constitute a popular class of methods for the numerical simulation of fluid flows. Among the various components of these methods, the discretisation of the gradient operator has received less attention despite its fundamental importance with regards to the accuracy of the FVM. The most popular gradient schemes are the divergence theorem (DT) (or Green-Gauss) scheme and the least-squares (LS) scheme. Both are widely believed to be second-order accurate, but the present study shows that in fact the common variant of the DT gradient is second-order accurate only on structured meshes whereas it is zeroth-order accurate on general unstructured meshes, and the LS gradient is second-order and first-order accurate, respectively. This is explained through a theoretical analysis and is confirmed by numerical tests. The schemes are then used within a FVM to solve a simple diffusion equation on unstructured grids generated by several methods; the results reveal that the zeroth-order accuracy of the DT gradient is inherited by the FVM as a whole, and the discretisation error does not decrease with grid refinement. On the other hand, use of the LS gradient leads to second-order accurate results, as does the use of alternative, consistent, DT gradient schemes, including a new iterative scheme that makes the common DT gradient consistent at almost no extra cost. The numerical tests are performed using both an in-house code and the popular public domain partial differential equation solver OpenFOAM.

Adsorptive Removal of Toxic Chromium from Waste-Water Using Wheat Straw and Eupatorium adenophorum

PubMed Central

Song, Dagang; Pan, Kaiwen; Tariq, Akash; Azizullah, Azizullah; Sun, Feng; Li, Zilong; Xiong, Qinli

2016-01-01

Environmental pollution with heavy metals is a serious issue worldwide posing threats to humans, animals and plants and to the stability of overall ecosystem. Chromium (Cr) is one of most hazardous heavy metals with a high carcinogenic and recalcitrant nature. Aim of the present study was to select low-cost biosorbent using wheat straw and Eupatorium adenophorum through simple carbonization process, capable of removing Cr (VI) efficiently from wastewater. From studied plants a low cost adsorbent was prepared for removing Cr (VI) from aqueous solution following very simple carbonization method excluding activation process. Several factors such as pH, contact time, sorbent dosage and temperature were investigated for attaining ideal condition. For analysis of adsorption equilibrium isotherm data, Langmuir, Freundlich and Temkin models were used while pseudo-first-order, pseudo-second-order, external diffusion and intra-particle diffusion models were used for the analysis of kinetic data. The obtained results revealed that 99.9% of Cr (VI) removal was observed in the solution with a pH of 1.0. Among all the tested models Langmuir model fitted more closely according to the data obtained. Increase in adsorption capacity was observed with increasing temperature revealing endothermic nature of Cr (VI). The maximum Cr (VI) adsorption potential of E. adenophorum and wheat straw was 89.22 mg per 1 gram adsorbent at 308K. Kinetic data of absorption precisely followed pseudo-second-order model. Present study revealed highest potential of E. adenophorum and wheat straw for producing low cost adsorbent and to remove Cr (VI) from contaminated water. PMID:27911906

Adsorptive Removal of Toxic Chromium from Waste-Water Using Wheat Straw and Eupatorium adenophorum.

PubMed

Song, Dagang; Pan, Kaiwen; Tariq, Akash; Azizullah, Azizullah; Sun, Feng; Li, Zilong; Xiong, Qinli

2016-01-01

Environmental pollution with heavy metals is a serious issue worldwide posing threats to humans, animals and plants and to the stability of overall ecosystem. Chromium (Cr) is one of most hazardous heavy metals with a high carcinogenic and recalcitrant nature. Aim of the present study was to select low-cost biosorbent using wheat straw and Eupatorium adenophorum through simple carbonization process, capable of removing Cr (VI) efficiently from wastewater. From studied plants a low cost adsorbent was prepared for removing Cr (VI) from aqueous solution following very simple carbonization method excluding activation process. Several factors such as pH, contact time, sorbent dosage and temperature were investigated for attaining ideal condition. For analysis of adsorption equilibrium isotherm data, Langmuir, Freundlich and Temkin models were used while pseudo-first-order, pseudo-second-order, external diffusion and intra-particle diffusion models were used for the analysis of kinetic data. The obtained results revealed that 99.9% of Cr (VI) removal was observed in the solution with a pH of 1.0. Among all the tested models Langmuir model fitted more closely according to the data obtained. Increase in adsorption capacity was observed with increasing temperature revealing endothermic nature of Cr (VI). The maximum Cr (VI) adsorption potential of E. adenophorum and wheat straw was 89.22 mg per 1 gram adsorbent at 308K. Kinetic data of absorption precisely followed pseudo-second-order model. Present study revealed highest potential of E. adenophorum and wheat straw for producing low cost adsorbent and to remove Cr (VI) from contaminated water.

MaxEnt, second variation, and generalized statistics

NASA Astrophysics Data System (ADS)

Plastino, A.; Rocca, M. C.

2015-10-01

There are two kinds of Tsallis-probability distributions: heavy tail ones and compact support distributions. We show here, by appeal to functional analysis' tools, that for lower bound Hamiltonians, the second variation's analysis of the entropic functional guarantees that the heavy tail q-distribution constitutes a maximum of Tsallis' entropy. On the other hand, in the compact support instance, a case by case analysis is necessary in order to tackle the issue.

Phase transitions and thermodynamic properties of antiferromagnetic Ising model with next-nearest-neighbor interactions on the Kagomé lattice

NASA Astrophysics Data System (ADS)

Ramazanov, M. K.; Murtazaev, A. K.; Magomedov, M. A.; Badiev, M. K.

2018-06-01

We study phase transitions and thermodynamic properties in the two-dimensional antiferromagnetic Ising model with next-nearest-neighbor interaction on a Kagomé lattice by Monte Carlo simulations. A histogram data analysis shows that a second-order transition occurs in the model. From the analysis of obtained data, we can assume that next-nearest-neighbor ferromagnetic interactions in two-dimensional antiferromagnetic Ising model on a Kagomé lattice excite the occurrence of a second-order transition and unusual behavior of thermodynamic properties on the temperature dependence.

Supersonic second order analysis and optimization program user's manual

NASA Technical Reports Server (NTRS)

Clever, W. C.

1984-01-01

Approximate nonlinear inviscid theoretical techniques for predicting aerodynamic characteristics and surface pressures for relatively slender vehicles at supersonic and moderate hypersonic speeds were developed. Emphasis was placed on approaches that would be responsive to conceptual configuration design level of effort. Second order small disturbance theory was utilized to meet this objective. Numerical codes were developed for analysis and design of relatively general three dimensional geometries. Results from the computations indicate good agreement with experimental results for a variety of wing, body, and wing-body shapes. Case computational time of one minute on a CDC 176 are typical for practical aircraft arrangement.

Activities, self-referent memory beliefs, and cognitive performance: evidence for direct and mediated relations.

PubMed

Jopp, Daniela; Hertzog, Christopher

2007-12-01

In this study, the authors investigated the role of activities and self-referent memory beliefs for cognitive performance in a life-span sample. A factor analysis identified 8 activity factors, including Developmental Activities, Experiential Activities, Social Activities, Physical Activities, Technology Use, Watching Television, Games, and Crafts. A second-order general activity factor was significantly related to a general factor of cognitive function as defined by ability tests. Structural regression models suggested that prediction of cognition by activity level was partially mediated by memory beliefs, controlling for age, education, health, and depressive affect. Models adding paths from general and specific activities to aspects of crystallized intelligence suggested additional unique predictive effects for some activities. In alternative models, nonsignificant effects of beliefs on activities were detected when cognition predicted both variables, consistent with the hypothesis that beliefs derive from monitoring cognition and have no influence on activity patterns. PsycINFO Database Record (c) 2008 APA, all rights reserved.

Medium Optimization for the Production of Fibrinolytic Enzyme by Paenibacillus sp. IND8 Using Response Surface Methodology

PubMed Central

Prakash Vincent, Samuel Gnana

2014-01-01

Production of fibrinolytic enzyme by a newly isolated Paenibacillus sp. IND8 was optimized using wheat bran in solid state fermentation. A 25 full factorial design (first-order model) was applied to elucidate the key factors as moisture, pH, sucrose, yeast extract, and sodium dihydrogen phosphate. Statistical analysis of the results has shown that moisture, sucrose, and sodium dihydrogen phosphate have the most significant effects on fibrinolytic enzymes production (P < 0.05). Central composite design (CCD) was used to determine the optimal concentrations of these three components and the experimental results were fitted with a second-order polynomial model at 95% level (P < 0.05). Overall, 4.5-fold increase in fibrinolytic enzyme production was achieved in the optimized medium as compared with the unoptimized medium. PMID:24523635

Analysis of a Rocket Based Combined Cycle Engine during Rocket Only Operation

NASA Technical Reports Server (NTRS)

Smith, T. D.; Steffen, C. J., Jr.; Yungster, S.; Keller, D. J.

1998-01-01

The all rocket mode of operation is a critical factor in the overall performance of a rocket based combined cycle (RBCC) vehicle. However, outside of performing experiments or a full three dimensional analysis, there are no first order parametric models to estimate performance. As a result, an axisymmetric RBCC engine was used to analytically determine specific impulse efficiency values based upon both full flow and gas generator configurations. Design of experiments methodology was used to construct a test matrix and statistical regression analysis was used to build parametric models. The main parameters investigated in this study were: rocket chamber pressure, rocket exit area ratio, percent of injected secondary flow, mixer-ejector inlet area, mixer-ejector area ratio, and mixer-ejector length-to-inject diameter ratio. A perfect gas computational fluid dynamics analysis was performed to obtain values of vacuum specific impulse. Statistical regression analysis was performed based on both full flow and gas generator engine cycles. Results were also found to be dependent upon the entire cycle assumptions. The statistical regression analysis determined that there were five significant linear effects, six interactions, and one second-order effect. Two parametric models were created to provide performance assessments of an RBCC engine in the all rocket mode of operation.

Optimization of torrefaction conditions of coffee industry residues using desirability function approach.

PubMed

Buratti, C; Barbanera, M; Lascaro, E; Cotana, F

2018-03-01

The aim of the present study is to analyze the influence of independent process variables such as temperature, residence time, and heating rate on the torrefaction process of coffee chaff (CC) and spent coffee grounds (SCGs). Response surface methodology and a three-factor and three-level Box-Behnken design were used in order to evaluate the effects of the process variables on the weight loss (W L ) and the Higher Heating Value (HHV) of the torrefied materials. Results showed that the effects of the three factors on both responses were sequenced as follows: temperature>residence time>heating rate. Data obtained from the experiments were analyzed by analysis of variance (ANOVA) and fitted to second-order polynomial models by using multiple regression analysis. Predictive models were determined, able to obtain satisfactory fittings of the experimental data, with coefficient of determination (R 2 ) values higher than 0.95. An optimization study using Derringer's desired function methodology was also carried out and the optimal torrefaction conditions were found: temperature 271.7°C, residence time 20min, heating rate 5°C/min for CC and 256.0°C, 20min, 25°C/min for SCGs. The experimental values closely agree with the corresponding predicted values. Copyright © 2017 Elsevier Ltd. All rights reserved.

SRB combustion dynamics analysis computer program (CDA-1)

NASA Technical Reports Server (NTRS)

Chung, T. J.; Park, O. Y.

1988-01-01

A two-dimensional numerical model is developed for the unsteady oscillatory combustion of the solid propellant flame zone. Variations of pressure with low and high frequency responses across the long flame, such as in the double-base propellants, are accommodated. The formulation is based on a premixed, laminar flame with a one-step overall chemical reaction and the Arrhenius law of decomposition for the gaseous phase with no condensed phase reaction. Numerical calculations are carried out using the Galerkin finite elements, with perturbations expanded to the zeroth, first, and second orders. The numerical results indicate that amplification of oscillatory motions does indeed prevail in high frequency regions. For the second order system, the trend is similar to the first order system for low frequencies, but instabilities may appear at frequencies lower than those of the first order system. The most significant effect of the second order system is that the admittance is extremely oscillatory between moderately high frequency ranges.

The role played by self-orientational properties in nematics of colloids with molecules axially symmetric.

PubMed

Alarcón-Waess, O

2010-04-14

The self-orientational structure factor as well as the short-time self-orientational diffusion coefficient is computed for colloids composed by nonspherical molecules. To compute the short-time dynamics the hydrodynamic interactions are not taken into account. The hard molecules with at least one symmetry axis considered are: rods, spherocylinders, and tetragonal parallelepipeds. Because both orientational properties in study are written in terms of the second and fourth order parameters, these automatically hold the features of the order parameters. That is, they present a discontinuity for first order transitions, determining in this way the spinodal line. In order to analyze the nematic phase only, we choose the appropriate values for the representative quantities that characterize the molecules. Different formalisms are used to compute the structural properties: de Gennes-Landau approach, Smoluchowski equation and computer simulations. Some of the necessary inputs are taken from literature. Our results show that the self-orientational properties play an important role in the characterization and the localization of axially symmetric phases. While the self-structure decreases throughout the nematics, the short-time self-diffusion does not decrease but rather increases. We study the evolution of the second and fourth order parameters; we find different responses for axial and biaxial nematics, predicting the possibility of a biaxial nematics in tetragonal parallelepiped molecules. By considering the second order in the axial-biaxial phase transition, with the support of the self-orientational structure factor, we are able to propose the density at which this occurs. The short-time dynamics is able to predict a different value in the axial and the biaxial phases. Because the different behavior of the fourth order parameter, the diffusion coefficient is lower for a biaxial phase than for an axial one. Therefore the self-structure factor is able to localize continuous phase transitions involving axially symmetric phases and the short-time self-orientational diffusion is able to distinguish the ordered phase by considering the degree of alignment, that is, axial or biaxial.

Multi-Scale Morphological Analysis of Conductance Signals in Vertical Upward Gas-Liquid Two-Phase Flow

NASA Astrophysics Data System (ADS)

Lian, Enyang; Ren, Yingyu; Han, Yunfeng; Liu, Weixin; Jin, Ningde; Zhao, Junying

2016-11-01

The multi-scale analysis is an important method for detecting nonlinear systems. In this study, we carry out experiments and measure the fluctuation signals from a rotating electric field conductance sensor with eight electrodes. We first use a recurrence plot to recognise flow patterns in vertical upward gas-liquid two-phase pipe flow from measured signals. Then we apply a multi-scale morphological analysis based on the first-order difference scatter plot to investigate the signals captured from the vertical upward gas-liquid two-phase flow loop test. We find that the invariant scaling exponent extracted from the multi-scale first-order difference scatter plot with the bisector of the second-fourth quadrant as the reference line is sensitive to the inhomogeneous distribution characteristics of the flow structure, and the variation trend of the exponent is helpful to understand the process of breakup and coalescence of the gas phase. In addition, we explore the dynamic mechanism influencing the inhomogeneous distribution of the gas phase in terms of adaptive optimal kernel time-frequency representation. The research indicates that the system energy is a factor influencing the distribution of the gas phase and the multi-scale morphological analysis based on the first-order difference scatter plot is an effective method for indicating the inhomogeneous distribution of the gas phase in gas-liquid two-phase flow.

Abstract Interpreters for Free

NASA Astrophysics Data System (ADS)

Might, Matthew

In small-step abstract interpretations, the concrete and abstract semantics bear an uncanny resemblance. In this work, we present an analysis-design methodology that both explains and exploits that resemblance. Specifically, we present a two-step method to convert a small-step concrete semantics into a family of sound, computable abstract interpretations. The first step re-factors the concrete state-space to eliminate recursive structure; this refactoring of the state-space simultaneously determines a store-passing-style transformation on the underlying concrete semantics. The second step uses inference rules to generate an abstract state-space and a Galois connection simultaneously. The Galois connection allows the calculation of the "optimal" abstract interpretation. The two-step process is unambiguous, but nondeterministic: at each step, analysis designers face choices. Some of these choices ultimately influence properties such as flow-, field- and context-sensitivity. Thus, under the method, we can give the emergence of these properties a graph-theoretic characterization. To illustrate the method, we systematically abstract the continuation-passing style lambda calculus to arrive at two distinct families of analyses. The first is the well-known k-CFA family of analyses. The second consists of novel "environment-centric" abstract interpretations, none of which appear in the literature on static analysis of higher-order programs.

Word Order and Linguistic Factors in the Second Language Processing of Spanish Passive Sentences

ERIC Educational Resources Information Center

Lee, James F.

2017-01-01

The present study examines how second language learners (L2) assign the thematic roles of agent/patient in Spanish passive sentences with "ser" (often referred to as the true passive) when it is their initial exposure to this structure. The target sentences were preceded by a contextual sentence. After hearing the two sentences,…

Second-moment budgets in cloud topped boundary layers: A large-eddy simulation study

NASA Astrophysics Data System (ADS)

Heinze, Rieke; Mironov, Dmitrii; Raasch, Siegfried

2015-06-01

A detailed analysis of second-order moment budgets for cloud topped boundary layers (CTBLs) is performed using high-resolution large-eddy simulation (LES). Two CTBLs are simulated—one with trade wind shallow cumuli, and the other with nocturnal marine stratocumuli. Approximations to the ensemble-mean budgets of the Reynolds-stress components, of the fluxes of two quasi-conservative scalars, and of the scalar variances and covariance are computed by averaging the LES data over horizontal planes and over several hundred time steps. Importantly, the subgrid scale contributions to the budget terms are accounted for. Analysis of the LES-based second-moment budgets reveals, among other things, a paramount importance of the pressure scrambling terms in the Reynolds-stress and scalar-flux budgets. The pressure-strain correlation tends to evenly redistribute kinetic energy between the components, leading to the growth of horizontal-velocity variances at the expense of the vertical-velocity variance which is produced by buoyancy over most of both CTBLs. The pressure gradient-scalar covariances are the major sink terms in the budgets of scalar fluxes. The third-order transport proves to be of secondary importance in the scalar-flux budgets. However, it plays a key role in maintaining budgets of TKE and of the scalar variances and covariance. Results from the second-moment budget analysis suggest that the accuracy of description of the CTBL structure within the second-order closure framework strongly depends on the fidelity of parameterizations of the pressure scrambling terms in the flux budgets and of the third-order transport terms in the variance budgets. This article was corrected on 26 JUN 2015. See the end of the full text for details.

Analysis and design of a second-order digital phase-locked loop

NASA Technical Reports Server (NTRS)

Blasche, P. R.

1979-01-01

A specific second-order digital phase-locked loop (DPLL) was modeled as a first-order Markov chain with alternatives. From the matrix of transition probabilities of the Markov chain, the steady-state phase error of the DPLL was determined. In a similar manner the loop's response was calculated for a fading input. Additionally, a hardware DPLL was constructed and tested to provide a comparison to the results obtained from the Markov chain model. In all cases tested, good agreement was found between the theoretical predictions and the experimental data.

Testing charm quark equilibration in ultrahigh-energy heavy ion collisions with fluctuations

NASA Astrophysics Data System (ADS)

Graf, Thorben; Steinheimer, Jan; Bleicher, Marcus; Herold, Christoph

2018-03-01

Recent lattice QCD data on higher order susceptibilities of charm quarks provide the opportunity to explore charm quark equilibration in the early quark gluon plasma (QGP) phase. Here, we propose to use the lattice data on second- and fourth-order net charm susceptibilities to infer the charm quark equilibration temperature and the corresponding volume, in the early QGP stage, via a combined analysis of experimentally measured multiplicity fluctuations. Furthermore, the first perturbative results for the second- and fourth-order charm quark susceptibilities and their ratio are presented.

Voluntary rewards mediate the evolution of pool punishment for maintaining public goods in large populations

NASA Astrophysics Data System (ADS)

Sasaki, Tatsuya; Uchida, Satoshi; Chen, Xiaojie

2015-03-01

Punishment is a popular tool when governing commons in situations where free riders would otherwise take over. It is well known that sanctioning systems, such as the police and courts, are costly and thus can suffer from those who free ride on other's efforts to maintain the sanctioning systems (second-order free riders). Previous game-theory studies showed that if populations are very large, pool punishment rarely emerges in public good games, even when participation is optional, because of second-order free riders. Here we show that a matching fund for rewarding cooperation leads to the emergence of pool punishment, despite the presence of second-order free riders. We demonstrate that reward funds can pave the way for a transition from a population of free riders to a population of pool punishers. A key factor in promoting the transition is also to reward those who contribute to pool punishment, yet not abstaining from participation. Reward funds eventually vanish in raising pool punishment, which is sustainable by punishing the second-order free riders. This suggests that considering the interdependence of reward and punishment may help to better understand the origins and transitions of social norms and institutions.

Voluntary rewards mediate the evolution of pool punishment for maintaining public goods in large populations.

PubMed

Sasaki, Tatsuya; Uchida, Satoshi; Chen, Xiaojie

2015-03-10

Punishment is a popular tool when governing commons in situations where free riders would otherwise take over. It is well known that sanctioning systems, such as the police and courts, are costly and thus can suffer from those who free ride on other's efforts to maintain the sanctioning systems (second-order free riders). Previous game-theory studies showed that if populations are very large, pool punishment rarely emerges in public good games, even when participation is optional, because of second-order free riders. Here we show that a matching fund for rewarding cooperation leads to the emergence of pool punishment, despite the presence of second-order free riders. We demonstrate that reward funds can pave the way for a transition from a population of free riders to a population of pool punishers. A key factor in promoting the transition is also to reward those who contribute to pool punishment, yet not abstaining from participation. Reward funds eventually vanish in raising pool punishment, which is sustainable by punishing the second-order free riders. This suggests that considering the interdependence of reward and punishment may help to better understand the origins and transitions of social norms and institutions.

Monitoring heavy metal Cr in soil based on hyperspectral data using regression analysis

NASA Astrophysics Data System (ADS)

Zhang, Ningyu; Xu, Fuyun; Zhuang, Shidong; He, Changwei

2016-10-01

Heavy metal pollution in soils is one of the most critical problems in the global ecology and environment safety nowadays. Hyperspectral remote sensing and its application is capable of high speed, low cost, less risk and less damage, and provides a good method for detecting heavy metals in soil. This paper proposed a new idea of applying regression analysis of stepwise multiple regression between the spectral data and monitoring the amount of heavy metal Cr by sample points in soil for environmental protection. In the measurement, a FieldSpec HandHeld spectroradiometer is used to collect reflectance spectra of sample points over the wavelength range of 325-1075 nm. Then the spectral data measured by the spectroradiometer is preprocessed to reduced the influence of the external factors, and the preprocessed methods include first-order differential equation, second-order differential equation and continuum removal method. The algorithms of stepwise multiple regression are established accordingly, and the accuracy of each equation is tested. The results showed that the accuracy of first-order differential equation works best, which makes it feasible to predict the content of heavy metal Cr by using stepwise multiple regression.

Hope and Hopelessness: The Role of Hope in Buffering the Impact of Hopelessness on Suicidal Ideation

PubMed Central

Huen, Jenny M. Y.; Ip, Brian Y. T.; Ho, Samuel M. Y.; Yip, Paul S. F.

2015-01-01

Objectives The present study investigated whether hope and hopelessness are better conceptualized as a single construct of bipolar spectrum or two distinct constructs and whether hope can moderate the relationship between hopelessness and suicidal ideation. Methods Hope, hopelessness, and suicidal ideation were measured in a community sample of 2106 participants through a population-based household survey. Results Confirmatory factor analyses showed that a measurement model with separate, correlated second-order factors of hope and hopelessness provided a good fit to the data and was significantly better than that of the model collapsing hope and hopelessness into a single second-order factor. Negative binomial regression showed that hope and hopelessness interacted such that the effect of hopelessness on suicidal ideation was lower in individuals with higher hope than individuals with lower hope. Conclusions Hope and hopelessness are two distinct but correlated constructs. Hope can act as a resilience factor that buffers the impact of hopelessness on suicidal ideation. Inducing hope in people may be a promising avenue for suicide prevention. PMID:26107687

Performance capabilities of the 8-cm mercury ion thruster

NASA Technical Reports Server (NTRS)

Mantenieks, M. A.

1981-01-01

A preliminary characterization of the performance capabilities of the 8-cm thruster in order to initiate an evaluation of its application to LSS propulsion requirements is presented. With minor thruster modifications, the thrust was increased by about a factor of four while the discharge voltage was reduced from 39 to 22 volts. The thruster was operated over a range of specific impulse of 1950 to 3040 seconds and a maximum total efficiency of about 54 percent was attained. Preliminary analysis of component lifetimes, as determined by temperature and spectroscopic line intensity measurements, indicated acceptable thruster lifetimes are anticipated at the high power level operation.

Transportation economics and energy

NASA Astrophysics Data System (ADS)

Soltani Sobh, Ali

The overall objective of this research is to study the impacts of technology improvement including fuel efficiency increment, extending the use of natural gas vehicle and electric vehicles on key parameters of transportation. In the first chapter, a simple economic analysis is used in order to demonstrate the adoption rate of natural gas vehicles as an alternative fuel vehicle. The effect of different factors on adoption rate of commuters is calculated in sensitivity analysis. In second chapter the VMT is modeled and forecasted under influence of CNG vehicles in different scenarios. The VMT modeling is based on the time series data for Washington State. In order to investigate the effect of population growth on VMT, the per capita model is also developed. In third chapter the effect of fuel efficiency improvement on fuel tax revenue and greenhouse emission is examined. The model is developed based on time series data of Washington State. The rebound effect resulted from fuel efficiency improvement is estimated and is considered in fuel consumption forecasting. The reduction in fuel tax revenue and greenhouse gas (GHG) emissions as two outcomes of lower fuel consumption are computed. In addition, the proper fuel tax rate to restitute the revenue is suggested. In the fourth chapter effective factors on electric vehicles (EV) adoption is discussed. The constructed model is aggregated binomial logit share model that estimates the modal split between EV and conventional vehicles for different states over time. Various factors are incorporated in the utility function as explanatory variables in order to quantify their effect on EV adoption choices. The explanatory variables include income, VMT, electricity price, gasoline price, urban area and number of EV stations.

On the Accuracy of Probabilistic Bucking Load Prediction

NASA Technical Reports Server (NTRS)

Arbocz, Johann; Starnes, James H.; Nemeth, Michael P.

2001-01-01

The buckling strength of thin-walled stiffened or unstiffened, metallic or composite shells is of major concern in aeronautical and space applications. The difficulty to predict the behavior of axially compressed thin-walled cylindrical shells continues to worry design engineers as we enter the third millennium. Thanks to extensive research programs in the late sixties and early seventies and the contributions of many eminent scientists, it is known that buckling strength calculations are affected by the uncertainties in the definition of the parameters of the problem such as definition of loads, material properties, geometric variables, edge support conditions, and the accuracy of the engineering models and analysis tools used in the design phase. The NASA design criteria monographs from the late sixties account for these design uncertainties by the use of a lump sum safety factor. This so-called 'empirical knockdown factor gamma' usually results in overly conservative design. Recently new reliability based probabilistic design procedure for buckling critical imperfect shells have been proposed. It essentially consists of a stochastic approach which introduces an improved 'scientific knockdown factor lambda(sub a)', that is not as conservative as the traditional empirical one. In order to incorporate probabilistic methods into a High Fidelity Analysis Approach one must be able to assess the accuracy of the various steps that must be executed to complete a reliability calculation. In the present paper the effect of size of the experimental input sample on the predicted value of the scientific knockdown factor lambda(sub a) calculated by the First-Order, Second-Moment Method is investigated.

Second derivative time integration methods for discontinuous Galerkin solutions of unsteady compressible flows

NASA Astrophysics Data System (ADS)

Nigro, A.; De Bartolo, C.; Crivellini, A.; Bassi, F.

2017-12-01

In this paper we investigate the possibility of using the high-order accurate A (α) -stable Second Derivative (SD) schemes proposed by Enright for the implicit time integration of the Discontinuous Galerkin (DG) space-discretized Navier-Stokes equations. These multistep schemes are A-stable up to fourth-order, but their use results in a system matrix difficult to compute. Furthermore, the evaluation of the nonlinear function is computationally very demanding. We propose here a Matrix-Free (MF) implementation of Enright schemes that allows to obtain a method without the costs of forming, storing and factorizing the system matrix, which is much less computationally expensive than its matrix-explicit counterpart, and which performs competitively with other implicit schemes, such as the Modified Extended Backward Differentiation Formulae (MEBDF). The algorithm makes use of the preconditioned GMRES algorithm for solving the linear system of equations. The preconditioner is based on the ILU(0) factorization of an approximated but computationally cheaper form of the system matrix, and it has been reused for several time steps to improve the efficiency of the MF Newton-Krylov solver. We additionally employ a polynomial extrapolation technique to compute an accurate initial guess to the implicit nonlinear system. The stability properties of SD schemes have been analyzed by solving a linear model problem. For the analysis on the Navier-Stokes equations, two-dimensional inviscid and viscous test cases, both with a known analytical solution, are solved to assess the accuracy properties of the proposed time integration method for nonlinear autonomous and non-autonomous systems, respectively. The performance of the SD algorithm is compared with the ones obtained by using an MF-MEBDF solver, in order to evaluate its effectiveness, identifying its limitations and suggesting possible further improvements.

Mass transport in morphogenetic processes: A second gradient theory for volumetric growth and material remodeling

NASA Astrophysics Data System (ADS)

Ciarletta, P.; Ambrosi, D.; Maugin, G. A.

2012-03-01

In this work, we derive a novel thermo-mechanical theory for growth and remodeling of biological materials in morphogenetic processes. This second gradient hyperelastic theory is the first attempt to describe both volumetric growth and mass transport phenomena in a single-phase continuum model, where both stress- and shape-dependent growth regulations can be investigated. The diffusion of biochemical species (e.g. morphogens, growth factors, migration signals) inside the material is driven by configurational forces, enforced in the balance equations and in the set of constitutive relations. Mass transport is found to depend both on first- and on second-order material connections, possibly withstanding a chemotactic behavior with respect to diffusing molecules. We find that the driving forces of mass diffusion can be written in terms of covariant material derivatives reflecting, in a purely geometrical manner, the presence of a (first-order) torsion and a (second-order) curvature. Thermodynamical arguments show that the Eshelby stress and hyperstress tensors drive the rearrangement of the first- and second-order material inhomogeneities, respectively. In particular, an evolution law is proposed for the first-order transplant, extending a well-known result for inelastic materials. Moreover, we define the first stress-driven evolution law of the second-order transplant in function of the completely material Eshelby hyperstress. The theory is applied to two biomechanical examples, showing how an Eshelbian coupling can coordinate volumetric growth, mass transport and internal stress state, both in physiological and pathological conditions. Finally, possible applications of the proposed model are discussed for studying the unknown regulation mechanisms in morphogenetic processes, as well as for optimizing scaffold architecture in regenerative medicine and tissue engineering.

Fast HPLC-DAD quantification of nine polyphenols in honey by using second-order calibration method based on trilinear decomposition algorithm.

PubMed

Zhang, Xiao-Hua; Wu, Hai-Long; Wang, Jian-Yao; Tu, De-Zhu; Kang, Chao; Zhao, Juan; Chen, Yao; Miu, Xiao-Xia; Yu, Ru-Qin

2013-05-01

This paper describes the use of second-order calibration for development of HPLC-DAD method to quantify nine polyphenols in five kinds of honey samples. The sample treatment procedure was simplified effectively relative to the traditional ways. Baselines drift was also overcome by means of regarding the drift as additional factor(s) as well as the analytes of interest in the mathematical model. The contents of polyphenols obtained by the alternating trilinear decomposition (ATLD) method have been successfully used to distinguish different types of honey. This method shows good linearity (r>0.99), rapidity (t<7.60 min) and accuracy, which may be extremely promising as an excellent routine strategy for identification and quantification of polyphenols in the complex matrices. Copyright © 2012 Elsevier Ltd. All rights reserved.

Unbalanced and Minimal Point Equivalent Estimation Second-Order Split-Plot Designs

NASA Technical Reports Server (NTRS)

Parker, Peter A.; Kowalski, Scott M.; Vining, G. Geoffrey

2007-01-01

Restricting the randomization of hard-to-change factors in industrial experiments is often performed by employing a split-plot design structure. From an economic perspective, these designs minimize the experimental cost by reducing the number of resets of the hard-to- change factors. In this paper, unbalanced designs are considered for cases where the subplots are relatively expensive and the experimental apparatus accommodates an unequal number of runs per whole-plot. We provide construction methods for unbalanced second-order split- plot designs that possess the equivalence estimation optimality property, providing best linear unbiased estimates of the parameters; independent of the variance components. Unbalanced versions of the central composite and Box-Behnken designs are developed. For cases where the subplot cost approaches the whole-plot cost, minimal point designs are proposed and illustrated with a split-plot Notz design.

Tool for a configurable integrated circuit that uses determination of dynamic power consumption

NASA Technical Reports Server (NTRS)

Davoodi, Azadeh (Inventor); French, Matthew C. (Inventor); Agarwal, Deepak (Inventor); Wang, Li (Inventor)

2011-01-01

A configurable logic tool that allows minimization of dynamic power within an FPGA design without changing user-entered specifications. The minimization of power may use minimized clock nets as a first order operation, and a second order operation that minimizes other factors, such as area of placement, area of clocks and/or slack.

Synchronization from Second Order Network Connectivity Statistics

PubMed Central

Zhao, Liqiong; Beverlin, Bryce; Netoff, Theoden; Nykamp, Duane Q.

2011-01-01

We investigate how network structure can influence the tendency for a neuronal network to synchronize, or its synchronizability, independent of the dynamical model for each neuron. The synchrony analysis takes advantage of the framework of second order networks, which defines four second order connectivity statistics based on the relative frequency of two-connection network motifs. The analysis identifies two of these statistics, convergent connections, and chain connections, as highly influencing the synchrony. Simulations verify that synchrony decreases with the frequency of convergent connections and increases with the frequency of chain connections. These trends persist with simulations of multiple models for the neuron dynamics and for different types of networks. Surprisingly, divergent connections, which determine the fraction of shared inputs, do not strongly influence the synchrony. The critical role of chains, rather than divergent connections, in influencing synchrony can be explained by their increasing the effective coupling strength. The decrease of synchrony with convergent connections is primarily due to the resulting heterogeneity in firing rates. PMID:21779239

Psychometrics properties of early trauma inventory self report - short form (ETISR-SR) for the Brazilian context.

PubMed

Osório, Flávia L; Salum, Giovanni Abrahão; Donadon, Mariana Fortunata; Forni-Dos-Santos, Larissa; Loureiro, Sonia Regina; Crippa, José Alexandre S

2013-01-01

This study aims to translate and validate Early Trauma Inventory Self Report -Short Form (ETISR-SF) to Brazilian Portuguese. 253 adult subjects answered the ETISR-SF, Beck Anxiety Inventory (BAI), Fagerström Test for Nicotine Dependence (FTND), Patient Health Questionnaire (PHQ-9) and Fast Alcohol Screening Test (FAST). The instrument showed good internal consistency (0.83). Correlations with the PHQ-9 and BAI were moderate (r=0.26-0.47) and showed the expected associations with psychiatric constructs. No associations were found for FTND and FAST. Confirmatory Factor Analysis revealed that a correlated four-factor model as well as a second order model subsuming four lower order components presented the best model fit. Test-retest reliability was also excellent (ICC=0.78-0.90). ETISR-SF is suitable for assessing traumatic experiences in a Brazilian community sample. Given the importance of trauma as a public health problem, tools such as ETISR-SF may help clinicians/ researchers to better evaluate and measure such events and further advance clinical care of trauma victims.

High-Order Hyperbolic Residual-Distribution Schemes on Arbitrary Triangular Grids

NASA Technical Reports Server (NTRS)

Mazaheri, Alireza; Nishikawa, Hiroaki

2015-01-01

In this paper, we construct high-order hyperbolic residual-distribution schemes for general advection-diffusion problems on arbitrary triangular grids. We demonstrate that the second-order accuracy of the hyperbolic schemes can be greatly improved by requiring the scheme to preserve exact quadratic solutions. We also show that the improved second-order scheme can be easily extended to third-order by further requiring the exactness for cubic solutions. We construct these schemes based on the LDA and the SUPG methodology formulated in the framework of the residual-distribution method. For both second- and third-order-schemes, we construct a fully implicit solver by the exact residual Jacobian of the second-order scheme, and demonstrate rapid convergence of 10-15 iterations to reduce the residuals by 10 orders of magnitude. We demonstrate also that these schemes can be constructed based on a separate treatment of the advective and diffusive terms, which paves the way for the construction of hyperbolic residual-distribution schemes for the compressible Navier-Stokes equations. Numerical results show that these schemes produce exceptionally accurate and smooth solution gradients on highly skewed and anisotropic triangular grids, including curved boundary problems, using linear elements. We also present Fourier analysis performed on the constructed linear system and show that an under-relaxation parameter is needed for stabilization of Gauss-Seidel relaxation.

Solving Upwind-Biased Discretizations: Defect-Correction Iterations

NASA Technical Reports Server (NTRS)

Diskin, Boris; Thomas, James L.

1999-01-01

This paper considers defect-correction solvers for a second order upwind-biased discretization of the 2D convection equation. The following important features are reported: (1) The asymptotic convergence rate is about 0.5 per defect-correction iteration. (2) If the operators involved in defect-correction iterations have different approximation order, then the initial convergence rates may be very slow. The number of iterations required to get into the asymptotic convergence regime might grow on fine grids as a negative power of h. In the case of a second order target operator and a first order driver operator, this number of iterations is roughly proportional to h-1/3. (3) If both the operators have the second approximation order, the defect-correction solver demonstrates the asymptotic convergence rate after three iterations at most. The same three iterations are required to converge algebraic error below the truncation error level. A novel comprehensive half-space Fourier mode analysis (which, by the way, can take into account the influence of discretized outflow boundary conditions as well) for the defect-correction method is developed. This analysis explains many phenomena observed in solving non-elliptic equations and provides a close prediction of the actual solution behavior. It predicts the convergence rate for each iteration and the asymptotic convergence rate. As a result of this analysis, a new very efficient adaptive multigrid algorithm solving the discrete problem to within a given accuracy is proposed. Numerical simulations confirm the accuracy of the analysis and the efficiency of the proposed algorithm. The results of the numerical tests are reported.

Accuracy Analysis for Finite-Volume Discretization Schemes on Irregular Grids

NASA Technical Reports Server (NTRS)

Diskin, Boris; Thomas, James L.

2010-01-01

A new computational analysis tool, downscaling test, is introduced and applied for studying the convergence rates of truncation and discretization errors of nite-volume discretization schemes on general irregular (e.g., unstructured) grids. The study shows that the design-order convergence of discretization errors can be achieved even when truncation errors exhibit a lower-order convergence or, in some cases, do not converge at all. The downscaling test is a general, efficient, accurate, and practical tool, enabling straightforward extension of verification and validation to general unstructured grid formulations. It also allows separate analysis of the interior, boundaries, and singularities that could be useful even in structured-grid settings. There are several new findings arising from the use of the downscaling test analysis. It is shown that the discretization accuracy of a common node-centered nite-volume scheme, known to be second-order accurate for inviscid equations on triangular grids, degenerates to first order for mixed grids. Alternative node-centered schemes are presented and demonstrated to provide second and third order accuracies on general mixed grids. The local accuracy deterioration at intersections of tangency and in flow/outflow boundaries is demonstrated using the DS tests tailored to examining the local behavior of the boundary conditions. The discretization-error order reduction within inviscid stagnation regions is demonstrated. The accuracy deterioration is local, affecting mainly the velocity components, but applies to any order scheme.

Accurate Projection Methods for the Incompressible Navier–Stokes Equations

DOE PAGES

Brown, David L.; Cortez, Ricardo; Minion, Michael L.

2001-04-10

This paper considers the accuracy of projection method approximations to the initial–boundary-value problem for the incompressible Navier–Stokes equations. The issue of how to correctly specify numerical boundary conditions for these methods has been outstanding since the birth of the second-order methodology a decade and a half ago. It has been observed that while the velocity can be reliably computed to second-order accuracy in time and space, the pressure is typically only first-order accurate in the L ∞-norm. Here, we identify the source of this problem in the interplay of the global pressure-update formula with the numerical boundary conditions and presentsmore » an improved projection algorithm which is fully second-order accurate, as demonstrated by a normal mode analysis and numerical experiments. In addition, a numerical method based on a gauge variable formulation of the incompressible Navier–Stokes equations, which provides another option for obtaining fully second-order convergence in both velocity and pressure, is discussed. The connection between the boundary conditions for projection methods and the gauge method is explained in detail.« less

Chaotic Oscillations of Second Order Linear Hyperbolic Equations with Nonlinear Boundary Conditions: A Factorizable but Noncommutative Case

NASA Astrophysics Data System (ADS)

Li, Liangliang; Huang, Yu; Chen, Goong; Huang, Tingwen

If a second order linear hyperbolic partial differential equation in one-space dimension can be factorized as a product of two first order operators and if the two first order operators commute, with one boundary condition being the van der Pol type and the other being linear, one can establish the occurrence of chaos when the parameters enter a certain regime [Chen et al., 2014]. However, if the commutativity of the two first order operators fails to hold, then the treatment in [Chen et al., 2014] no longer works and significant new challenges arise in determining nonlinear boundary conditions that engenders chaos. In this paper, we show that by incorporating a linear memory effect, a nonlinear van der Pol boundary condition can cause chaotic oscillations when the parameter enters a certain regime. Numerical simulations illustrating chaotic oscillations are also presented.

An improved finite-difference analysis of uncoupled vibrations of tapered cantilever beams

NASA Technical Reports Server (NTRS)

Subrahmanyam, K. B.; Kaza, K. R. V.

1983-01-01

An improved finite difference procedure for determining the natural frequencies and mode shapes of tapered cantilever beams undergoing uncoupled vibrations is presented. Boundary conditions are derived in the form of simple recursive relations involving the second order central differences. Results obtained by using the conventional first order central differences and the present second order central differences are compared, and it is observed that the present second order scheme is more efficient than the conventional approach. An important advantage offered by the present approach is that the results converge to exact values rapidly, and thus the extrapolation of the results is not necessary. Consequently, the basic handicap with the classical finite difference method of solution that requires the Richardson's extrapolation procedure is eliminated. Furthermore, for the cases considered herein, the present approach produces consistent lower bound solutions.

Research on the sonic boom problem. Part 1: Second-order solutions for the flow field around slender bodies in supersonic flow for sonic boom analysis

NASA Technical Reports Server (NTRS)

Landahl, M.; Loefgren, P.

1973-01-01

A second-order theory for supersonic flow past slender bodies is presented. Through the introduction of characteristic coordinates as independent variables and the expansion procedure proposed by Lin and Oswatitsch, a uniformly valid solution is obtained for the whole flow field in the axisymmetric case and for far field in the general three-dimensional case. For distances far from the body the theory is an extension of Whitham's first-order solution and for the domain close to the body it is a modification of Van Dyke's second-order solution in the axisymmetric case. From the theory useful formulas relating flow deflections to the Whitham F-function are derived, which permits one to determine the sonic boom strength from wind tunnel measurements fairly close to the body.

A quarantine protocol for analysis of returned extraterrestrial samples

NASA Technical Reports Server (NTRS)

Bagby, J. R.; Sweet, H. C.; Devincenzi, D. L.

1983-01-01

A protocol is presented for the analysis at an earth-orbiting quarantine facility of return samples of extraterrestrial material that might contain (nonterrestrial) life forms. The protocol consists of a series of tests designed to determine whether the sample, conceptualized as a 1-kg sample of Martian soil, is free from nonterrestrial biologically active agents and so may safely be sent to a terrestrial containment facility, or it exhibits biological activity requiring further (second-order) testing outside the biosphere. The first-order testing procedure seeks to detect the presence of any replicating organisms or toxic substances through a series of experiments including gas sampling, analysis of radioactivity, stereomicroscopic inspection, chemical analysis, microscopic examination, the search for metabolic products under growth conditions, microbiologicl assays, and the challenge of cultured cells with any agents found or with the extraterrestrial material as is. Detailed plans for the second-order testing would be developed in response to the actual data received from primary testing.

Phenotypic characterisation of Saccharomyces spp. yeast for tolerance to stresses encountered during fermentation of lignocellulosic residues to produce bioethanol

PubMed Central

2014-01-01

Background During industrial fermentation of lignocellulose residues to produce bioethanol, microorganisms are exposed to a number of factors that influence productivity. These include inhibitory compounds produced by the pre-treatment processes required to release constituent carbohydrates from biomass feed-stocks and during fermentation, exposure of the organisms to stressful conditions. In addition, for lignocellulosic bioethanol production, conversion of both pentose and hexose sugars is a pre-requisite for fermentative organisms for efficient and complete conversion. All these factors are important to maximise industrial efficiency, productivity and profit margins in order to make second-generation bioethanol an economically viable alternative to fossil fuels for future transport needs. Results The aim of the current study was to assess Saccharomyces yeasts for their capacity to tolerate osmotic, temperature and ethanol stresses and inhibitors that might typically be released during steam explosion of wheat straw. Phenotypic microarray analysis was used to measure tolerance as a function of growth and metabolic activity. Saccharomyces strains analysed in this study displayed natural variation to each stress condition common in bioethanol fermentations. In addition, many strains displayed tolerance to more than one stress, such as inhibitor tolerance combined with fermentation stresses. Conclusions Our results suggest that this study could identify a potential candidate strain or strains for efficient second generation bioethanol production. Knowledge of the Saccharomyces spp. strains grown in these conditions will aid the development of breeding programmes in order to generate more efficient strains for industrial fermentations. PMID:24670111

Integration by parts and Pohozaev identities for space-dependent fractional-order operators

NASA Astrophysics Data System (ADS)

Grubb, Gerd

2016-08-01

Consider a classical elliptic pseudodifferential operator P on Rn of order 2a (0 < a < 1) with even symbol. For example, P = A(x , D) a where A (x , D) is a second-order strongly elliptic differential operator; the fractional Laplacian (- Δ) a is a particular case. For solutions u of the Dirichlet problem on a bounded smooth subset Ω ⊂Rn, we show an integration-by-parts formula with a boundary integral involving (d-a u)|∂Ω, where d (x) = dist (x , ∂ Ω). This extends recent results of Ros-Oton, Serra and Valdinoci, to operators that are x-dependent, nonsymmetric, and have lower-order parts. We also generalize their formula of Pohozaev-type, that can be used to prove unique continuation properties, and nonexistence of nontrivial solutions of semilinear problems. An illustration is given with P =(- Δ +m2) a. The basic step in our analysis is a factorization of P, P ∼P-P+, where we set up a calculus for the generalized pseudodifferential operators P± that come out of the construction.

MRI textures as outcome predictor for Gamma Knife radiosurgery on vestibular schwannoma

NASA Astrophysics Data System (ADS)

Langenhuizen, P. P. J. H.; Legters, M. J. W.; Zinger, S.; Verheul, H. B.; Leenstra, S.; de With, P. H. N.

2018-02-01

Vestibular schwannomas (VS) are benign brain tumors that can be treated with high-precision focused radiation with the Gamma Knife in order to stop tumor growth. Outcome prediction of Gamma Knife radiosurgery (GKRS) treatment can help in determining whether GKRS will be effective on an individual patient basis. However, at present, prognostic factors of tumor control after GKRS for VS are largely unknown, and only clinical factors, such as size of the tumor at treatment and pre-treatment growth rate of the tumor, have been considered thus far. This research aims at outcome prediction of GKRS by means of quantitative texture feature analysis on conventional MRI scans. We compute first-order statistics and features based on gray-level co- occurrence (GLCM) and run-length matrices (RLM), and employ support vector machines and decision trees for classification. In a clinical dataset, consisting of 20 tumors showing treatment failure and 20 tumors exhibiting treatment success, we have discovered that the second-order statistical metrics distilled from GLCM and RLM are suitable for describing texture, but are slightly outperformed by simple first-order statistics, like mean, standard deviation and median. The obtained prediction accuracy is about 85%, but a final choice of the best feature can only be made after performing more extensive analyses on larger datasets. In any case, this work provides suitable texture measures for successful prediction of GKRS treatment outcome for VS.

Food choice questionnaire revisited in four countries. Does it still measure the same?

PubMed

Januszewska, Renata; Pieniak, Zuzanna; Verbeke, Wim

2011-08-01

This study focuses on the implementation of the food choice questionnaire (FCQ) across four countries. The first objective is to examine the degree to which the factor structure of the FCQ is invariant across different populations. The second objective is to analyse the motives for food choice in different countries. The cross-sectional sample of 1420 consumers consisted of Belgians (N=458), Hungarians (N=401), Romanians (N=229) and Filipinos (N=332). Data analyses included estimation of five multi-group confirmatory factor analysis models; calculation of mean importance ratings for each food choice factor across countries; ANOVA and Tukey post hoc tests; and a rank order test of most to least important factors within each country. The results confirm that the factorial structure of the FCQ is invariant with respect to factor configuration, factor loadings and item intercept. Sensory appeal is the most important factor among all European consumers, while health, convenience and price were all among the five most important factors shaping food choice in Belgium, Hungary and Romania. For Filipinos, the most important were health, price and mood. Sensory appeal ranked on the fourth place. Copyright © 2011 Elsevier Ltd. All rights reserved.

Layer contributions to the nonlinear acoustic radiation from stratified media.

PubMed

Vander Meulen, François; Haumesser, Lionel

2016-12-01

This study presents the thorough investigation of the second harmonic generation scenario in a three fluid layer system. An emphasis is on the evaluation of the nonlinear parameter B/A in each layer from remote measurements. A theoretical approach of the propagation of a finite amplitude acoustic wave in a multilayered medium is developed. In the frame of the KZK equation, the weak nonlinearity of the media, attenuation and diffraction effects are computed for the fundamental and second harmonic waves propagating back and forth in each of the layers of the system. The model uses a gaussian expansion to describe the beam propagation in order to quantitatively evaluate the contribution of each part of the system (layers and interfaces) to its nonlinearity. The model is validated through measurements on a water/aluminum/water system. Transmission as well as reflection configurations are studied. Good agreement is found between the theoretical results and the experimental data. The analysis of the second harmonic field sources measured by the transducers from outside the stratified medium highlights the factors that favor the cumulative effects. Copyright © 2016 Elsevier B.V. All rights reserved.

Factor structure and psychometric properties of a Romanian translation of the drive for Muscularity Scale (DMS) in university men.

PubMed

Swami, Viren; Vintila, Mona; Tudorel, Otilia; Goian, Cosmin; Barron, David

2018-06-01

We examined the psychometric properties of a Romanian translation of the 15-item Drive for Muscularity Scale (DMS). Male university students from Romania (N = 343) completed the DMS, as well as measures of self-esteem, body appreciation, and muscle discrepancy. Exploratory factor analysis indicated that DMS scores reduced to two factors that related to muscularity-oriented attitudes and behaviours, with both first-order factors loading onto a higher-order factor. However, confirmatory factor analysis indicated that a model with two first-order factors and a higher-order factor had poor fit. A two-factor model without a higher-order construct achieved acceptable but mediocre fit. Scores on the two-factor DMS model had adequate internal consistency and demonstrated acceptable convergent validity (significant correlations with self-esteem, body appreciation, and muscle discrepancy). These results provide support for a two-factor model of DMS scores in a Romanian-speaking sample and extends the availability of the DMS to a rarely-examined linguistic group. Copyright © 2018 Elsevier Ltd. All rights reserved.

One-jet inclusive cross section at order a(s)-cubed - Gluons only

NASA Technical Reports Server (NTRS)

Ellis, Stephen D.; Kunszt, Zoltan; Soper, Davison E.

1989-01-01

A complete calculation of the hadron jet cross-section at one order beyond the Born approximation is performed for the simplified case in which there are only gluons. The general structure of the differences from the lowest-order cross-section are described. This step allows two important improvements in the understanding of the theoretical hadron jet cross-section: first, the cross section at this order displays explicit dependence on the jet cone size, so that explicit account can be taken of the differences in jet definitions employed by different experiments; second, the magnitude of the uncertainty of the theoretical cross-section due to the arbitrary choice of the factorization scale has been reduced by a factor of two to three.

Analysis of flight test transition and turbulent heating data. Part 1: Boundary layer transition results

NASA Technical Reports Server (NTRS)

Martellucci, A.; Maguire, B. L.; Neff, R. S.

1972-01-01

The objective of the study was to provide a detailed post flight evaluation of ballistic vehicle flight test boundary layer transition data. A total of fifty-five vehicles were selected for analysis. These vehicles were chosen from a data sampling of roughly two hundred flights and the criteria for vehicle selection is delineated herein. The results of the analysis indicate that frustum transition of re-entry vehicles appears to be nose tip dominated. Frustum related parameters and materials apparently have a second order effect on transition. This implies that local viscous parameters on the frustum should not correlate flight test transition data, and in fact they do not. Specific parameters relative to the nose tip have been identified as the apparent dominant factors that characterize the transition phenomena and a correlation of flight test data is presented.

Nonlinear histogram binning for quantitative analysis of lung tissue fibrosis in high-resolution CT data

NASA Astrophysics Data System (ADS)

Zavaletta, Vanessa A.; Bartholmai, Brian J.; Robb, Richard A.

2007-03-01

Diffuse lung diseases, such as idiopathic pulmonary fibrosis (IPF), can be characterized and quantified by analysis of volumetric high resolution CT scans of the lungs. These data sets typically have dimensions of 512 x 512 x 400. It is too subjective and labor intensive for a radiologist to analyze each slice and quantify regional abnormalities manually. Thus, computer aided techniques are necessary, particularly texture analysis techniques which classify various lung tissue types. Second and higher order statistics which relate the spatial variation of the intensity values are good discriminatory features for various textures. The intensity values in lung CT scans range between [-1024, 1024]. Calculation of second order statistics on this range is too computationally intensive so the data is typically binned between 16 or 32 gray levels. There are more effective ways of binning the gray level range to improve classification. An optimal and very efficient way to nonlinearly bin the histogram is to use a dynamic programming algorithm. The objective of this paper is to show that nonlinear binning using dynamic programming is computationally efficient and improves the discriminatory power of the second and higher order statistics for more accurate quantification of diffuse lung disease.

Effect of Fe3O4 addition on removal of ammonium by zeolite NaA.

PubMed

Liu, Haibo; Peng, Shuchuan; Shu, Lin; Chen, Tianhu; Bao, Teng; Frost, Ray L

2013-01-15

Magnetic zeolite NaA with different Fe(3)O(4) loadings was prepared by hydrothermal synthesis based on metakaolin and Fe(3)O(4). The effect of added Fe(3)O(4) on the removal of ammonium by zeolite NaA was investigated by varying the Fe(3)O(4) loading, pH, adsorption temperature, initial concentration, adsorption time. Langmuir, Freundlich, and pseudo-second-order modeling were used to describe the nature and mechanism of ammonium ion exchange using both zeolite and magnetic zeolite. Thermodynamic parameters such as change in Gibbs free energy, enthalpy and entropy were calculated. The results show that all the selected factors affect the ammonium ion exchange by zeolite and magnetic zeolite, however, the added Fe(3)O(4) apparently does not affect the ion exchange performance of zeolite to the ammonium ion. Freundlich model provides a better description of the adsorption process than Langmuir model. Moreover, kinetic analysis indicates the exchange of ammonium on the two materials follows a pseudo-second-order model. Thermodynamic analysis makes it clear that the adsorption process of ammonium is spontaneous and exothermic. Regardless of kinetic or thermodynamic analysis, all the results suggest that no considerable effect on the adsorption of the ammonium ion by zeolite is found after the addition of Fe(3)O(4). According to the results, magnetic zeolite NaA can be used for the removal of ammonium due to the good adsorption performance and easy separation method from aqueous solution. Copyright © 2012 Elsevier Inc. All rights reserved.

Multivariate analysis of organic acids in fermented food from reversed-phase high-performance liquid chromatography data.

PubMed

Mortera, Pablo; Zuljan, Federico A; Magni, Christian; Bortolato, Santiago A; Alarcón, Sergio H

2018-02-01

Multivariate calibration coupled to RP-HPLC with diode array detection (HPLC-DAD) was applied to the identification and the quantitative evaluation of the short chain organic acids (malic, oxalic, formic, lactic, acetic, citric, pyruvic, succinic, tartaric, propionic and α-cetoglutaric) in fermented food. The goal of the present study was to get the successful resolution of a system in the combined occurrence of strongly coeluting peaks, of distortions in the time sensors among chromatograms, and of the presence of unexpected compounds not included in the calibration step. Second-order HPLC-DAD data matrices were obtained in a short time (10min) on a C18 column with a chromatographic system operating in isocratic mode (mobile phase was 20mmolL -1 phosphate buffer at pH 2.20) and a flow-rate of 1.0mLmin -1 at room temperature. Parallel factor analysis (PARAFAC) and unfolded partial least-squares combined with residual bilinearization (U-PLS/RBL) were the second-order calibration algorithms select for data processing. The performance of the analytical parameters was good with an outstanding limit of detection (LODs) for acids ranging from 0.15 to 10.0mmolL -1 in the validation samples. The improved method was applied to the analysis of many dairy products (yoghurt, cultured milk and cheese) and wine. The method was shown as an effective means for determining and following acid contents in fermented food and was characterized by reducibility with simple, high resolution and rapid procedure without derivatization of analytes. Copyright © 2017 Elsevier B.V. All rights reserved.

Dependence and physical exercise: Spanish validation of the Exercise Dependence Scale-Revised (EDS-R).

PubMed

Sicilia, Alvaro; González-Cutre, David

2011-05-01

The purpose of this study was to validate the Spanish version of the Exercise Dependence Scale-Revised (EDS-R). To achieve this goal, a sample of 531 sport center users was used and the psychometric properties of the EDS-R were examined through different analyses. The results supported both the first-order seven-factor model and the higher-order model (seven first-order factors and one second-order factor). The structure of both models was invariant across age. Correlations among the subscales indicated a related factor model, supporting construct validity of the scale. Alpha values over .70 (except for Reduction in Other Activities) and suitable levels of temporal stability were obtained. Users practicing more than three days per week had higher scores in all subscales than the group practicing with a frequency of three days or fewer. The findings of this study provided reliability and validity for the EDS-R in a Spanish context.

FACTOR 9.2: A Comprehensive Program for Fitting Exploratory and Semiconfirmatory Factor Analysis and IRT Models

ERIC Educational Resources Information Center

Lorenzo-Seva, Urbano; Ferrando, Pere J.

2013-01-01

FACTOR 9.2 was developed for three reasons. First, exploratory factor analysis (FA) is still an active field of research although most recent developments have not been incorporated into available programs. Second, there is now renewed interest in semiconfirmatory (SC) solutions as suitable approaches to the complex structures are commonly found…

Factorial Validity of the Decisional Involvement Scale as a Measure of Content and Context of Nursing Practice.

PubMed

Yurek, Leo A; Havens, Donna S; Hays, Spencer; Hughes, Linda C

2015-10-01

Decisional involvement is widely recognized as an essential component of a professional nursing practice environment. In recent years, researchers have added to the conceptualization of nurses' role in decision-making to differentiate between the content and context of nursing practice. Yet, instruments that clearly distinguish between these two dimensions of practice are lacking. The purpose of this study was to examine the factorial validity of the Decisional Involvement Scale (DIS) as a measure of both the content and context of nursing practice. This secondary analysis was conducted using data from a longitudinal action research project to improve the quality of nursing practice and patient care in six hospitals (N = 1,034) in medically underserved counties of Pennsylvania. A cross-sectional analysis of baseline data from the parent study was used to compare the factor structure of two models (one nested within the other) using confirmatory factor analysis. Although a comparison of the two models indicated that the addition of second-order factors for the content and context of nursing practice improved model fit, neither model provided optimal fit to the data. Additional model-generating research is needed to develop the DIS as a valid measure of decisional involvement for both the content and context of nursing practice. © 2015 Wiley Periodicals, Inc.

The Construct of Creativity: Structural Model for Self-Reported Creativity Ratings

ERIC Educational Resources Information Center

Kaufman, James C.; Cole, Jason C.; Baer, John

2009-01-01

Several thousand subjects completed self-report questionnaires about their own creativity in 56 discrete domains. This sample was then randomly divided into three subsamples that were subject to factor analyses that compared an oblique model (with a set of correlated factors) and a hierarchical model (with a single second-order, or hierarchical,…

3D frequency-domain finite-difference modeling of acoustic wave propagation

NASA Astrophysics Data System (ADS)

Operto, S.; Virieux, J.

2006-12-01

We present a 3D frequency-domain finite-difference method for acoustic wave propagation modeling. This method is developed as a tool to perform 3D frequency-domain full-waveform inversion of wide-angle seismic data. For wide-angle data, frequency-domain full-waveform inversion can be applied only to few discrete frequencies to develop reliable velocity model. Frequency-domain finite-difference (FD) modeling of wave propagation requires resolution of a huge sparse system of linear equations. If this system can be solved with a direct method, solutions for multiple sources can be computed efficiently once the underlying matrix has been factorized. The drawback of the direct method is the memory requirement resulting from the fill-in of the matrix during factorization. We assess in this study whether representative problems can be addressed in 3D geometry with such approach. We start from the velocity-stress formulation of the 3D acoustic wave equation. The spatial derivatives are discretized with second-order accurate staggered-grid stencil on different coordinate systems such that the axis span over as many directions as possible. Once the discrete equations were developed on each coordinate system, the particle velocity fields are eliminated from the first-order hyperbolic system (following the so-called parsimonious staggered-grid method) leading to second-order elliptic wave equations in pressure. The second-order wave equations discretized on each coordinate system are combined linearly to mitigate the numerical anisotropy. Secondly, grid dispersion is minimized by replacing the mass term at the collocation point by its weighted averaging over all the grid points of the stencil. Use of second-order accurate staggered- grid stencil allows to reduce the bandwidth of the matrix to be factorized. The final stencil incorporates 27 points. Absorbing conditions are PML. The system is solved using the parallel direct solver MUMPS developed for distributed-memory computers. The MUMPS solver is based on a multifrontal method for LU factorization. We used the METIS algorithm to perform re-ordering of the matrix coefficients before factorization. Four grid points per minimum wavelength is used for discretization. We applied our algorithm to the 3D SEG/EAGE synthetic onshore OVERTHRUST model of dimensions 20 x 20 x 4.65 km. The velocities range between 2 and 6 km/s. We performed the simulations using 192 processors with 2 Gbytes of RAM memory per processor. We performed simulations for the 5 Hz, 7 Hz and 10 Hz frequencies in some fractions of the OVERTHRUST model. The grid interval was 100 m, 75 m and 50 m respectively. The grid dimensions were 207x207x53, 275x218x71 and 409x109x102 respectively corresponding to 100, 80 and 25 percents of the model respectively. The time for factorization is 20 mn, 108 mn and 163 mn respectively. The time for resolution was 3.8, 9.3 and 10.3 s per source. The total memory used during factorization is 143, 384 and 449 Gbytes respectively. One can note the huge memory requirement for factorization and the efficiency of the direct method to compute solutions for a large number of sources. This highlights the respective drawback and merit of the frequency-domain approach with respect to the time- domain counterpart. These results show that 3D acoustic frequency-domain wave propagation modeling can be performed at low frequencies using direct solver on large clusters of Pcs. This forward modeling algorithm may be used in the future as a tool to image the first kilometers of the crust by frequency-domain full-waveform inversion. For larger problems, we will use the out-of-core memory during factorization that has been implemented by the authors of MUMPS.

A Comparison of Two Balance Calibration Model Building Methods

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Ulbrich, Norbert

2007-01-01

Simulated strain-gage balance calibration data is used to compare the accuracy of two balance calibration model building methods for different noise environments and calibration experiment designs. The first building method obtains a math model for the analysis of balance calibration data after applying a candidate math model search algorithm to the calibration data set. The second building method uses stepwise regression analysis in order to construct a model for the analysis. Four balance calibration data sets were simulated in order to compare the accuracy of the two math model building methods. The simulated data sets were prepared using the traditional One Factor At a Time (OFAT) technique and the Modern Design of Experiments (MDOE) approach. Random and systematic errors were introduced in the simulated calibration data sets in order to study their influence on the math model building methods. Residuals of the fitted calibration responses and other statistical metrics were compared in order to evaluate the calibration models developed with different combinations of noise environment, experiment design, and model building method. Overall, predicted math models and residuals of both math model building methods show very good agreement. Significant differences in model quality were attributable to noise environment, experiment design, and their interaction. Generally, the addition of systematic error significantly degraded the quality of calibration models developed from OFAT data by either method, but MDOE experiment designs were more robust with respect to the introduction of a systematic component of the unexplained variance.

Prevalence and patterns of antidepressant switching amongst primary care patients in the UK.

PubMed

Mars, Becky; Heron, Jon; Gunnell, David; Martin, Richard M; Thomas, Kyla H; Kessler, David

2017-05-01

Non-response to antidepressant treatment is a substantial problem in primary care, and many patients with depression require additional second-line treatments. This study aimed to examine the prevalence and patterns of antidepressant switching in the UK, and identify associated demographic and clinical factors. Cohort analysis of antidepressant prescribing data from the Clinical Practice Research Datalink, a large, anonymised UK primary care database. The sample included 262,844 patients who initiated antidepressant therapy between 1 January 2005 and 31 June 2011. 9.3% of patients switched to a different antidepressant product, with most switches (60%) occurring within 8 weeks of the index date. The proportion switching was similar for selective serotonin reuptake inhibitors (SSRIs), tricyclic antidepressants and other antidepressants (9.3%, 9.8% and 9.2%, respectively). Most switches were to an SSRI (64.5%), and this was the preferred option regardless of initial antidepressant class. Factors predictive of switching included male gender, age, and history of self-harm and psychiatric illness. Over one in every 11 patients who initiates antidepressant therapy will switch medication, suggesting that initial antidepressant treatment has been unsatisfactory. Evidence to guide choice of second-line treatment for individual patients is currently limited. Additional research comparing different pharmacological and psychological second-line treatment strategies is required in order to inform guidelines and improve patient outcomes.

Second hip fractures at Chiang Mai University Hospital.

PubMed

Wongtriratanachai, Prasit; Chiewchantanakit, Siripong; Vaseenon, Tanawat; Rojanasthien, Sattaya; Leerapun, Taninnit

2015-02-01

Hip fractures are a major public health problem. Patients who have suffered a hip fracture have an increased risk of a subsequent hip fracture. This study examines the incidence ofsecondhip fractures and attempts to identify underlying risk factors. To examine the incidence ofsecond hip fractures in osteoporotic patients at Chiang Mai University Hospital and to identify risk factors related to second hip fractures. A retrospective review was conducted of all low-energy mechanism hip fracture patients admitted during 2008 and 2009. Analysis of second hip fractures was conducted using survival analysis and logistic regression analysis. A total of 191 patients were observed for 391.68 person-years (mean 2.05 person-years per patient). Among that group, nine second hip fractures were identified, an overall incidence rate of 0.023 second fractures per person-year. Second hip fractures tended to occur within the first year following an initial hip fracture. There were no significant differences related to either gender or comorbid medical conditions. Logistic regression analysis revealed that increased risk of a second hip fracture was associated with age (highest between 80 to 89 years) and patients who were not treated for osteoporosis following their initial fracture. The incidence of second hip fractures at Chiang Mai University Hospital was 0.023 per person-year Careful follow-up of older patients, especially those over 80, and treatment ofosteoporosis with bisphosphonate plus vitamin D and calcium supplements was correlated with a reduction in the incidence of second hip fractures.

M-Adapting Low Order Mimetic Finite Differences for Dielectric Interface Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGregor, Duncan A.; Gyrya, Vitaliy; Manzini, Gianmarco

2016-03-07

We consider a problem of reducing numerical dispersion for electromagnetic wave in the domain with two materials separated by a at interface in 2D with a factor of two di erence in wave speed. The computational mesh in the homogeneous parts of the domain away from the interface consists of square elements. Here the method construction is based on m-adaptation construction in homogeneous domain that leads to fourth-order numerical dispersion (vs. second order in non-optimized method). The size of the elements in two domains also di ers by a factor of two, so as to preserve the same value ofmore » Courant number in each. Near the interface where two meshes merge the mesh with larger elements consists of degenerate pentagons. We demonstrate that prior to m-adaptation the accuracy of the method falls from second to rst due to breaking of symmetry in the mesh. Next we develop m-adaptation framework for the interface region and devise an optimization criteria. We prove that for the interface problem m-adaptation cannot produce increase in method accuracy. This is in contrast to homogeneous medium where m-adaptation can increase accuracy by two orders.« less

From carpet bombing to cruise missiles: the 'second-order' mechanisms used by transcription factors to ensure specific DNA binding in vivo.

PubMed

Kodadek, T

1995-05-01

Transcription factors generally have only modest specificity for their target sites, yet must find them in a sea of non-specific DNA. Some transcription factors are expressed at very high levels, to ensure that, despite losses to non-specific binding, the promoter is still occupied (the carpet-bombing strategy). Others increase their binding specificity by collaborating with other factors in a variety of ways.

Extensions and applications of a second-order landsurface parameterization

NASA Technical Reports Server (NTRS)

Andreou, S. A.; Eagleson, P. S.

1983-01-01

Extensions and applications of a second order land surface parameterization, proposed by Andreou and Eagleson are developed. Procedures for evaluating the near surface storage depth used in one cell land surface parameterizations are suggested and tested by using the model. Sensitivity analysis to the key soil parameters is performed. A case study involving comparison with an "exact" numerical model and another simplified parameterization, under very dry climatic conditions and for two different soil types, is also incorporated.

Fundamental factors versus herding in the 2000 2005 US stock market and prediction

NASA Astrophysics Data System (ADS)

Zhou, Wei-Xing; Sornette, Didier

2006-02-01

We present a general methodology to incorporate fundamental economic factors to the theory of herding developed in our group to describe bubbles and antibubbles. We start from the strong form of rational expectation and derive the general method to incorporate factors in addition to the log-periodic power law (LPPL) signature of herding developed in ours and others’ works. These factors include interest rate, interest spread, historical volatility, implied volatility and exchange rates. Standard statistical AIC and Wilks tests allow us to compare the explanatory power of the different proposed factor models. We find that the historical volatility played the key role before August of 2002. Around October 2002, the interest rate dominated. In the first six months of 2003, the foreign exchange rate became the key factor. Since the end of 2003, all factors have played an increasingly large role. However, the most surprising result is that the best model is the second-order LPPL without any factor. We thus present a scenario for the future evolution of the US stock market based on the extrapolation of the fit of the second-order LPPL formula, which suggests that herding is still the dominating force and that the unraveling of the US stock market antibubble since 2000 is still qualitatively similar to (but quantitatively different from) the Japanese Nikkei case after 1990.

Numerical Analysis of Orbital Perturbation Effects on Inclined Geosynchronous SAR

PubMed Central

Dong, Xichao; Hu, Cheng; Long, Teng; Li, Yuanhao

2016-01-01

The geosynchronous synthetic aperture radar (GEO SAR) is susceptible to orbit perturbations, leading to orbit drifts and variations. The influences behave very differently from those in low Earth orbit (LEO) SAR. In this paper, the impacts of perturbations on GEO SAR orbital elements are modelled based on the perturbed dynamic equations, and then, the focusing is analyzed theoretically and numerically by using the Systems Tool Kit (STK) software. The accurate GEO SAR slant range histories can be calculated according to the perturbed orbit positions in STK. The perturbed slant range errors are mainly the first and second derivatives, leading to image drifts and defocusing. Simulations of the point target imaging are performed to validate the aforementioned analysis. In the GEO SAR with an inclination of 53° and an argument of perigee of 90°, the Doppler parameters and the integration time are different and dependent on the geometry configurations. Thus, the influences are varying at different orbit positions: at the equator, the first-order phase errors should be mainly considered; at the perigee and apogee, the second-order phase errors should be mainly considered; at other positions, first-order and second-order exist simultaneously. PMID:27598168

Shoppers' perceived embeddedness and its impact on purchasing behavior at an organic farmers' market.

PubMed

Chen, Weiping; Scott, Steffanie

2014-12-01

This study explores the concept of perceived embeddedness (PE) and its impact on purchasing behavior at an organic farmers' market. Based on a review of the prior literature, the study refines the conceptualization and measurement of PE as a second-order factor construct reflected in its three dimensions: perceived social embeddedness, perceived spatial embeddedness, and perceived natural embeddedness. The study also suggests that organic farmers' market shoppers' PE is positively related to the two measures of purchasing behavior: expenditure per visit and repurchase intention. In a sample of 492 organic farmers' market shoppers in Beijing municipality, China, the study find support for the second-order factor structure of PE and the theorized relationship between the shoppers' PE and their purchasing behavior. The study also discusses theoretical and managerial implications of the findings. Copyright © 2014 Elsevier Ltd. All rights reserved.

Validation of the Social Provisions Scale in people with multiple sclerosis.

PubMed

Chiu, Chung-Yi; Motl, Robert W; Ditchman, Nicole

2016-08-01

This study examined the factorial and construct validity of the Social Provisions Scale (SPS) in a sample of people with multiple sclerosis (MS). Participants included 292 individuals with MS (83.9% women) recruited from the Greater Illinois, Gateway, and Indiana chapters of the National Multiple Sclerosis Society. Participants completed the SPS and pain, fatigue, depression, anxiety, MS self-efficacy, quality of life, and satisfaction with life measures. Factorial validity was tested using confirmatory factor analysis (CFA), and construct validity was examined based on the strength of bivariate correlations with scores on related measures. Findings from the CFA indicated that a first-order, 6-factor measurement model provided a good fit for the 24 items of the SPS (CFI = .94, TLI = .93, RMSEA = 0.07) and that the 6 factors could be described by a single, second-order factor of the overall social provisions (CFI = .93, TLI = .92, RMSEA = 0.08). Cronbach's alpha was .89 for the global score and between .66 and .81 for the 6 subscales. The SPS global and subscale scores correlated significantly with satisfaction with life, depression, anxiety, MS self-efficacy, and quality of life measures. Findings from this study support the factorial validity, construct validity, and reliability of the SPS as a measure of social provisions for use with people with MS. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

The radiated noise from isotropic turbulence revisited

NASA Technical Reports Server (NTRS)

Lilley, Geoffrey M.

1993-01-01

The noise radiated from isotropic turbulence at low Mach numbers and high Reynolds numbers, as derived by Proudman (1952), was the first application of Lighthill's Theory of Aerodynamic Noise to a complete flow field. The theory presented by Proudman involves the assumption of the neglect of retarded time differences and so replaces the second-order retarded-time and space covariance of Lighthill's stress tensor, Tij, and in particular its second time derivative, by the equivalent simultaneous covariance. This assumption is a valid approximation in the derivation of the second partial derivative of Tij/derivative of t exp 2 covariance at low Mach numbers, but is not justified when that covariance is reduced to the sum of products of the time derivatives of equivalent second-order velocity covariances as required when Gaussian statistics are assumed. The present paper removes these assumptions and finds that although the changes in the analysis are substantial, the change in the numerical result for the total acoustic power is small. The present paper also considers an alternative analysis which does not neglect retarded times. It makes use of the Lighthill relationship, whereby the fourth-order Tij retarded-time covariance is evaluated from the square of similar second order covariance, which is assumed known. In this derivation, no statistical assumptions are involved. This result, using distributions for the second-order space-time velocity squared covariance based on the Direct Numerical Simulation (DNS) results of both Sarkar and Hussaini(1993) and Dubois(1993), is compared with the re-evaluation of Proudman's original model. These results are then compared with the sound power derived from a phenomenological model based on simple approximations to the retarded-time/space covariance of Txx. Finally, the recent numerical solutions of Sarkar and Hussaini(1993) for the acoustic power are compared with the results obtained from the analytic solutions.

On the accuracy of Whitham's method. [for steady ideal gas flow past cones

NASA Technical Reports Server (NTRS)

Zahalak, G. I.; Myers, M. K.

1974-01-01

The steady flow of an ideal gas past a conical body is studied by the method of matched asymptotic expansions and by Whitham's method in order to assess the accuracy of the latter. It is found that while Whitham's method does not yield a correct asymptotic representation of the perturbation field to second order in regions where the flow ahead of the Mach cone of the apex is disturbed, it does correctly predict the changes of the second-order perturbation quantities across a shock (the first-order shock strength). The results of the analysis are illustrated by a special case of a flat, rectangular plate at incidence.

Using the Nursing Culture Assessment Tool (NCAT) in Long-Term Care: An Update on Psychometrics and Scoring Standardization.

PubMed

Kennerly, Susan; Heggestad, Eric D; Myers, Haley; Yap, Tracey L

2015-07-29

An effective workforce performing within the context of a positive cultural environment is central to a healthcare organization's ability to achieve quality outcomes. The Nursing Culture Assessment Tool (NCAT) provides nurses with a valid and reliable tool that captures the general aspects of nursing culture. This study extends earlier work confirming the tool's construct validity and dimensionality by standardizing the scoring approach and establishing norm-referenced scoring. Scoring standardization provides a reliable point of comparison for NCAT users. NCAT assessments support nursing's ability to evaluate nursing culture, use results to shape the culture into one that supports change, and advance nursing's best practices and care outcomes. Registered nurses, licensed practical nurses, and certified nursing assistants from 54 long-term care facilities in Kentucky, Nevada, North Carolina, and Oregon were surveyed. Confirmatory factor analysis yielded six first order factors forming the NCAT's subscales (Expectations, Behaviors, Teamwork, Communication, Satisfaction, Commitment) (Comparative Fit Index 0.93) and a second order factor-The Total Culture Score. Aggregated facility level comparisons of observed group variance with expected random variance using rwg(J) statistics is presented. Normative scores and cumulative rank percentages and how the NCAT can be used in implementing planned change are provided.

Sorption of water alkalinity and hardness from high-strength wastewater on bifunctional activated carbon: process optimization, kinetics and equilibrium studies.

PubMed

Amosa, Mutiu K

2016-08-01

Sorption optimization and mechanism of hardness and alkalinity on bifunctional empty fruit bunch-based powdered activation carbon (PAC) were studied. The PAC possessed both high surface area and ion-exchange properties, and it was utilized in the treatment of biotreated palm oil mill effluent. Batch adsorption experiments designed with Design Expert(®) were conducted in correlating the singular and interactive effects of the three adsorption parameters: PAC dosage, agitation speed and contact time. The sorption trends of the two contaminants were sequentially assessed through a full factorial design with three factor interaction models and a central composite design with polynomial models of quadratic order. Analysis of variance revealed the significant factors on each design response with very high R(2) values indicating good agreement between model and experimental values. The optimum operating conditions of the two contaminants differed due to their different regions of operating interests, thus necessitating the utility of desirability factor to get consolidated optimum operation conditions. The equilibrium data for alkalinity and hardness sorption were better represented by the Langmuir isotherm, while the pseudo-second-order kinetic model described the adsorption rates and behavior better. It was concluded that chemisorption contributed majorly to the adsorption process.

Effects of biomotor structures on performance of competitive gymnastics elements in elementary school male sixth-graders.

PubMed

Delas, Suncica; Zagorac, Nebojsa; Katić, Ratko

2008-06-01

In order to identify the biomotor systems that determine performance of competitive gymnastics elements in elementary school male sixth-graders, factor structures of morphological characteristics and basic motor abilities were determined first, followed by relations of the morphological-motor system factors obtained with a set of criterion variables evaluating specific motor skills in competitive gymnastics in 110 male children aged 12 years +/- 3 months. Factor analysis of 17 morphological measures produced three morphological factors: factor of mesoectoendomorphy (general morphological factor) and factor of pronounced endomorphy, i.e. excessive adipose tissue, along with low skeleton longitudinality. Factor analysis of 16 motor variables yielded four motor factors: factor of general motoricity; factor integrating leg flexibility and arm explosiveness; factor juxtaposing body flexibility and repetitive leg strength; and factor predominantly defining leg movement frequency. Three significant canonical correlations, i.e. linear combinations, explained the association between the set of six latent variables of the morphological and basic motor system, and five variables assessing the knowledge in competitive gymnastics. The first canonical linear combination was based on the favorable and predominant impact of the general motor factor (a system integrating leg explosiveness, whole body coordination, relative arm and trunk strength, and arm movement frequency), along with unfavorable effect of morphological factors on the gymnastics elements performance, squat vault and handstand in particular The relation of the second pair of canonical factors pointed to the effects of leg flexibility and arm explosiveness on the cartwheel and backward pullover mount performance, whereas the relation of the third pair of canonical factors showed a favorable impact of the general morphological factor and leg movement frequency regulator on the forward shoulderkip from increase, cartwheel and handstand performance.

Cognitive and Psychosocial Factors in the Long-Term Development of Implicit and Explicit Second Language Knowledge in Adult Learners of Spanish at Increasing Proficiency

ERIC Educational Resources Information Center

Serafini, Ellen Johnson

2013-01-01

This study examined the second language (L2) development of adult learners of Spanish at three levels of proficiency during and after a semester of instruction. A fundamental goal was to identify cognitive and psychosocial individual differences (IDs) that can explain between-learner variation over time in order to expand our understanding of the…

Psychometric Properties of the Iowa Infant Feeding Attitude Scale among a Multiethnic Population during Pregnancy.

PubMed

Lau, Ying; Htun, Tha Pyai; Lim, Peng Im; Ho-Lim, Sarah Su Tin; Klainin-Yobas, Piyanee

2016-05-01

The Iowa Infant Feeding Attitude Scale (IIFAS) was developed to measure maternal attitudes toward infant feeding, but a number of validated studies on the IIFAS found that it was subject to methodological limitations. The purpose of this study was to evaluate the psychometric properties of the IIFAS among a multiethnic population in Singapore. A cross-sectional research design was used on a sample of 417 antenatal women. The internal consistency and stability of the IIFAS were evaluated using Cronbach's α and test-retest reliability. Known-group comparisons discriminated certain group differences in a predictable way. A series of exploratory factor analyses (EFAs) was conducted to test the factor structure of the IIFAS using the maximum likelihood and principal axis factoring. The number of factors was selected according to theoretical and statistical considerations. A confirmatory factor analysis (CFA) was further performed to validate the factor structure constructed in the prior EFA. The IIFAS had a Cronbach's α and Pearson correlation of 0.79 and 0.85, respectively. The known-group comparisons among certain groups were supported. The EFA results showed that the 3-factor structure produced the most interpretable and theoretical sense. A second-order CFA was conducted to confirm the construct dimensionality of the 15-item IIFAS, with satisfactory fit indices found. The 15-item IIFAS is a psychometrically sound measurement tool that health care professionals can use to understand the diverse infant feeding attitudes and knowledge among different ethnic groups in order to provide breastfeeding interventions that are culturally sensitive. © The Author(s) 2015.

The Construct Validity of Higher Order Structure-of-Intellect Abilities in a Battery of Tests Emphasizing the Product of Transformations: A Confirmatory Maximum Likelihood Factor Analysis.

ERIC Educational Resources Information Center

Khattab, Ali-Maher; And Others

1982-01-01

A causal modeling system, using confirmatory maximum likelihood factor analysis with the LISREL IV computer program, evaluated the construct validity underlying the higher order factor structure of a given correlation matrix of 46 structure-of-intellect tests emphasizing the product of transformations. (Author/PN)

Exploratory and Confirmatory Factor Analysis of the Career Decision-Making Difficulties Questionnaire

PubMed Central

Farrokhi, Farahman; Mahdavi, Ali; Moradi, Samad

2012-01-01

Objective The present study aimed at validating the structure of Career Decision-making Difficulties Questionnaire (CDDQ). Methods Five hundred and eleven undergraduate students took part in this research; from these participants, 63 males and 200 females took part in the first study, and 63 males and 185 females completed the survey for the second study. Results The results of exploratory factor analysis (EFA) indicated strong support for the three-factor structure, consisting of lack of information about the self, inconsistent information, lack of information and lack of readiness factors. A confirmatory factor analysis was run with the second sample using structural equation modeling. As expected, the three-factor solution provided a better fit to the data than the alternative models. Conclusion CDDQ was recommended to be used for college students in this study due to the fact that this instrument measures all three aspects of the model. Future research is needed to learn whether this model would fit other different samples. PMID:22952549

Application of the Finite Element Method in Atomic and Molecular Physics

NASA Technical Reports Server (NTRS)

Shertzer, Janine

2007-01-01

The finite element method (FEM) is a numerical algorithm for solving second order differential equations. It has been successfully used to solve many problems in atomic and molecular physics, including bound state and scattering calculations. To illustrate the diversity of the method, we present here details of two applications. First, we calculate the non-adiabatic dipole polarizability of Hi by directly solving the first and second order equations of perturbation theory with FEM. In the second application, we calculate the scattering amplitude for e-H scattering (without partial wave analysis) by reducing the Schrodinger equation to set of integro-differential equations, which are then solved with FEM.

Procedural learning in Parkinson's disease, specific language impairment, dyslexia, schizophrenia, developmental coordination disorder, and autism spectrum disorders: A second-order meta-analysis.

PubMed

Clark, Gillian M; Lum, Jarrad A G

2017-10-01

The serial reaction time task (SRTT) has been used to study procedural learning in clinical populations. In this report, second-order meta-analysis was used to investigate whether disorder type moderates performance on the SRTT. Using this approach to quantitatively summarise past research, it was tested whether autism spectrum disorder, developmental coordination disorder, dyslexia, Parkinson's disease, schizophrenia, and specific language impairment differentially affect procedural learning on the SRTT. The main analysis revealed disorder type moderated SRTT performance (p=0.010). This report demonstrates comparable levels of procedural learning impairment in developmental coordination disorder, dyslexia, Parkinson's disease, schizophrenia, and specific language impairment. However, in autism, procedural learning is spared. Copyright © 2017 Elsevier Inc. All rights reserved.

Medical and nonmedical factors influencing utilization of delayed pushing in the second stage.

PubMed

Frey, Heather A; Tuuli, Methodius G; Cortez, Sarah; Odibo, Anthony O; Roehl, Kimberly A; Shanks, Anthony L; Macones, George A; Cahill, Alison G

2013-08-01

To evaluate factors impacting selection to delayed pushing in the second stage of labor. This case-control study was a secondary analysis of a large retrospective cohort study. Cases included women who delayed pushing for 60 minutes or more in the second stage of labor. Controls began pushing prior to 60 minutes from the time of diagnosis of complete dilation. Demographic, labor, and nonmedical factors were compared among cases and controls. Logistic regression modeling was used to identify factors independently associated with delayed pushing. We identified 471 women who delayed pushing and 4819 controls. Nulliparity, maternal body mass index > 25, high fetal station at complete dilation, regional anesthesia use, and start of second stage during staffing shift change were independent factors associated with increased use of delayed pushing. On the other hand, black race and second-stage management during night shift were associated with lower odds of employing delayed pushing. Delayed pushing was more commonly employed in nulliparous women, but 38.9% of multiparous women also delayed pushing. We identified multiple factors associated with use of delayed pushing. This study helps to define current patterns of second-stage labor management. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Medical and Non-Medical Factors Influencing Utilization of Delayed Pushing in the Second Stage

PubMed Central

FREY, Heather A.; TUULI, Methodius G.; CORTEZ, Sarah; ODIBO, Anthony O.; ROEHL, Kimberly A.; SHANKS, Anthony L.; MACONES, George A.; CAHILL, Alison G.

2014-01-01

Objective To evaluate factors impacting selection to delayed pushing in the second stage of labor. Study design This case-control study was a secondary analysis of a large retrospective cohort study. Cases included women who delayed pushing for 60 minutes or more in the second stage of labor. Controls began pushing prior to 60 minutes from the time of diagnosis of complete dilation. Demographic, labor, and nonmedical factors were compared among cases and controls. Logistic regression modelling was used to identify factors independently associated with delayed pushing. Results We identified 471 women who delayed pushing and 4,819 controls. Nulliparity, maternal body mass index > 25, high fetal station at complete dilation, regional anesthesia use, and start of second stage during staffing shift change were independent factors associated with increased use of delayed pushing. On the other hand, black race and second stage management during night shift were associated with lower odds of employing delayed pushing. Delayed pushing was more commonly employed in nulliparous women, but 38.9% of multiparous women also delayed pushing. Conclusion We identified multiple factors associated with use of delayed pushing. This study helps to define current patterns of second stage labor management. PMID:23208765

Analysis of Bacterial and Archaeal Communities along a High-Molecular-Weight Polyacrylamide Transportation Pipeline System in an Oil Field

PubMed Central

Li, Cai-Yun; Li, Jing-Yan; Mbadinga, Serge Maurice; Liu, Jin-Feng; Gu, Ji-Dong; Mu, Bo-Zhong

2015-01-01

Viscosity loss of high-molecular-weight partially hydrolyzed polyacrylamide (HPAM) solution was observed in a water injection pipeline before being injected into subterranean oil wells. In order to investigate the possible involvement of microorganisms in HPAM viscosity loss, both bacterial and archaeal community compositions of four samples collected from different points of the transportation pipeline were analyzed using PCR-amplification of the 16S rRNA gene and clone library construction method together with the analysis of physicochemical properties of HPAM solution and environmental factors. Further, the relationship between environmental factors and HPAM properties with microorganisms were delineated by canonical correspondence analysis (CCA). Diverse bacterial and archaeal groups were detected in the four samples. The microbial community of initial solution S1 gathered from the make-up tank is similar to solution S2 gathered from the first filter, and that of solution S3 obtained between the first and the second filter is similar to that of solution S4 obtained between the second filter and the injection well. Members of the genus Acinetobacter sp. were detected with high abundance in S3 and S4 in which HPAM viscosity was considerably reduced, suggesting that they likely played a considerable role in HPAM viscosity loss. This study presents information on microbial community diversity in the HPAM transportation pipeline and the possible involvement of microorganisms in HPAM viscosity loss and biodegradation. The results will help to understand the microbial community contribution made to viscosity change and are beneficial for providing information for microbial control in oil fields. PMID:25849654

Analysis of bacterial and archaeal communities along a high-molecular-weight polyacrylamide transportation pipeline system in an oil field.

PubMed

Li, Cai-Yun; Li, Jing-Yan; Mbadinga, Serge Maurice; Liu, Jin-Feng; Gu, Ji-Dong; Mu, Bo-Zhong

2015-04-02

Viscosity loss of high-molecular-weight partially hydrolyzed polyacrylamide (HPAM) solution was observed in a water injection pipeline before being injected into subterranean oil wells. In order to investigate the possible involvement of microorganisms in HPAM viscosity loss, both bacterial and archaeal community compositions of four samples collected from different points of the transportation pipeline were analyzed using PCR-amplification of the 16S rRNA gene and clone library construction method together with the analysis of physicochemical properties of HPAM solution and environmental factors. Further, the relationship between environmental factors and HPAM properties with microorganisms were delineated by canonical correspondence analysis (CCA). Diverse bacterial and archaeal groups were detected in the four samples. The microbial community of initial solution S1 gathered from the make-up tank is similar to solution S2 gathered from the first filter, and that of solution S3 obtained between the first and the second filter is similar to that of solution S4 obtained between the second filter and the injection well. Members of the genus Acinetobacter sp. were detected with high abundance in S3 and S4 in which HPAM viscosity was considerably reduced, suggesting that they likely played a considerable role in HPAM viscosity loss. This study presents information on microbial community diversity in the HPAM transportation pipeline and the possible involvement of microorganisms in HPAM viscosity loss and biodegradation. The results will help to understand the microbial community contribution made to viscosity change and are beneficial for providing information for microbial control in oil fields.

Symmetry and singularity properties of second-order ordinary differential equations of Lie's type III

NASA Astrophysics Data System (ADS)

Andriopoulos, K.; Leach, P. G. L.

2007-04-01

We extend the work of Abraham-Shrauner [B. Abraham-Shrauner, Hidden symmetries and linearization of the modified Painleve-Ince equation, J. Math. Phys. 34 (1993) 4809-4816] on the linearization of the modified Painleve-Ince equation to a wider class of nonlinear second-order ordinary differential equations invariant under the symmetries of time translation and self-similarity. In the process we demonstrate a remarkable connection with the parameters obtained in the singularity analysis of this class of equations.

Absorbing boundary conditions for second-order hyperbolic equations

NASA Technical Reports Server (NTRS)

Jiang, Hong; Wong, Yau Shu

1989-01-01

A uniform approach to construct absorbing artificial boundary conditions for second-order linear hyperbolic equations is proposed. The nonlocal boundary condition is given by a pseudodifferential operator that annihilates travelling waves. It is obtained through the dispersion relation of the differential equation by requiring that the initial-boundary value problem admits the wave solutions travelling in one direction only. Local approximation of this global boundary condition yields an nth-order differential operator. It is shown that the best approximations must be in the canonical forms which can be factorized into first-order operators. These boundary conditions are perfectly absorbing for wave packets propagating at certain group velocities. A hierarchy of absorbing boundary conditions is derived for transonic small perturbation equations of unsteady flows. These examples illustrate that the absorbing boundary conditions are easy to derive, and the effectiveness is demonstrated by the numerical experiments.

Analyse Factorielle d'une Batterie de Tests de Comprehension Orale et Ecrite (Factor Analysis of a Battery of Tests of Listening and Reading Comprehension). Melanges Pedagogiques, 1971.

ERIC Educational Resources Information Center

Lonchamp, F.

This is a presentation of the results of a factor analysis of a battery of tests intended to measure listening and reading comprehension in English as a second language. The analysis sought to answer the following questions: (1) whether the factor analysis method yields results when applied to tests which are not specifically designed for this…

Elucidation of Formulation and Delivery Device-Related Effects on In Vitro Performance of Nasal Spray with Implication to Rational Product Specification Identification.

PubMed

Grmaš, Jernej; Stare, Katarina; Božič, Dane; Injac, Rade; Dreu, Rok

2017-08-01

The aim of this work is to use an experimental design approach to identify and study influential formulation and delivery device properties, which can be controlled by final product manufacturer, to establish design space, within which desired in vitro performance can be reached. Combining three factors, viscosity of suspension, nozzle orifice diameter (OD), and shot weight (SW), at three levels resulted in D-optimal experimental design with 20 runs. Responses within this study were droplet size distribution (DSD) and spray pattern (SP) in vitro tests. In addition, the amount of mechanical work needed for actuation was integrated from force profiles and used as a response. Results were fit to quadratic model by regression, which allowed also for determination of second-order and interaction effects between factors. Models were further optimized by keeping significant terms only. Optimized models were used to create response surfaces and design space with confidence levels. Viscosity has a dominant effect on DSD and modest effect on SP, with lower viscosities related to generation of smaller DSD and larger SP. Orifice diameter was found to have the highest impact on SP, with larger diameter resulting in larger SP. This effect was additionally confirmed by results of Plume Geometry in vitro test. Shot weight factor exerts significant influence on all tested metrics. Work, however, did not vary greatly with suspension viscosity or orifice diameter. Shot weight is the most dominant factor for work and important for DSD having a positive effect on both responses. In the case of SP, its relationship with shot weight is described by second-order polynomial fit. Inspection of raw data revealed that density of droplets within SP area is different for different shot weights. Presented study elucidated an inherent relationship between factors and responses and established mathematical models (response surfaces) for predictive purposes to target specific in vitro performance of nasal sprays by appropriate specification of factors, taking into account control space with included risk and uncertainty analysis.

Development of the Anxiety Scale for Natural Disaster: Examination of its Reliability

NASA Astrophysics Data System (ADS)

Matsumoto, Miki; Yatabe, Ryuichi

The objective of present study was to develop the a nxiety scale for natural disaster, and to examineits reliability. We developed the 14 items for the anxiety scale based on anticipated damage of Nankai earthquake in Ehime prefecture. The subjects consist of 391 people in Yawatahama city, Ehime prefecture. Firstly, we analyzed the latent factors which influenced the anxiety for natural disaster by using the factor analysis method. Secondly, we cal culated Cronbach's coefficient alpha. The result of the factor analysis confirmed the three factors such as "anxiety for lifeline damage", "anxiety for second ary disaster" and "fear for others". Cronbach's coefficient alpha for each factor showed the high interna l consistency reliability. We considered that each factor could prove to be a valuable tool for researc h about the person's anxiety for natural disaster.

Development and construct validity of the Classroom Strategies Scale-Observer Form.

PubMed

Reddy, Linda A; Fabiano, Gregory; Dudek, Christopher M; Hsu, Louis

2013-12-01

Research on progress monitoring has almost exclusively focused on student behavior and not on teacher practices. This article presents the development and validation of a new teacher observational assessment (Classroom Strategies Scale) of classroom instructional and behavioral management practices. The theoretical underpinnings and empirical basis for the instructional and behavioral management scales are presented. The Classroom Strategies Scale (CSS) evidenced overall good reliability estimates including internal consistency, interrater reliability, test-retest reliability, and freedom from item bias on important teacher demographics (age, educational degree, years of teaching experience). Confirmatory factor analyses (CFAs) of CSS data from 317 classrooms were carried out to assess the level of empirical support for (a) a 4 first-order factor theory concerning teachers' instructional practices, and (b) a 4 first-order factor theory concerning teachers' behavior management practice. Several fit indices indicated acceptable fit of the (a) and (b) CFA models to the data, as well as acceptable fit of less parsimonious alternative CFA models that included 1 or 2 second-order factors. Information-theory-based indices generally suggested that the (a) and (b) CFA models fit better than some more parsimonious alternative CFA models that included constraints on relations of first-order factors. Overall, CFA first-order and higher order factor results support the CSS-Observer Total, Composite, and subscales. Suggestions for future measurement development efforts are outlined. PsycINFO Database Record (c) 2013 APA, all rights reserved.

The relationship between wisdom and abstinence behaviors in women in recovery from substance abuse.

PubMed

Digangi, Julia A; Jason, Leonard A; Mendoza, Leslie; Miller, Steve A; Contreras, Richard

2013-01-01

Wisdom is theorized to be an important construct in recovery from substance abuse. In order to explore the role of wisdom in substance abuse recovery behaviors, the present study had two goals. First, it sought to examine the factor structure of a wisdom scale, the Foundational Value Scale (FVS) in a community sample of women in recovery from substance abuse. Second, the study examined how wisdom predicted the women's beliefs about their ability to abstain from future substance use. 116 women in recovery from substance abuse disorders were recruited from self-run recovery homes and a substance abuse recovery convention. Results from an exploratory factor analysis indicated that a modified version of the FVS has good internal consistency reliability and is composed of three wisdom-related dimensions. The three factors were then used to create a higher-order wisdom factor in a structural equation model (SEM) that was used to predict abstinence self-efficacy behaviors. Results from the SEM showed that the wisdom factor was predictive of greater abstinence self-efficacy behaviors. The FVS was found to be a reliable measure with women in recovery from substance abuse. In addition, wisdom predicted beliefs about self-efficacy such that those who reported higher levels of wisdom felt more confident in their abilities to abstain from alcohol. The results of this study indicate that wisdom is an important construct in the abstinence behaviors of women who are in recovery from substance abuse disorders.

Brief report on academic contributions from China on the topic of rheumatic diseases.

PubMed

Gao, Y; Liu, X; Zhang, L; Xia, T; Zhao, D

2017-02-01

Academic contributions by Chinese scholars have grown to take second place worldwide since 2009. However, little was known about Chinese academic contributions and their influence on rheumatic diseases. In order to present an overview of this field, a comprehensive bibliometrics analysis was performed based on data from two databases up to 2015. Since 2013, China has occupied third place regarding the number of rheumatic diseases' publications. Nevertheless, most of these articles were not associated with high impact factors or frequent citations, let alone great influence. Multidisciplinary teams are being formed. Although on the right track, more efforts in all aspects are needed to improve developments in the area of rheumatology in China.

Effects of biomotor structures on performance of competitive gymnastics elements in elementary school female sixth-graders.

PubMed

Delas, Suncica; Babin, Josip; Katić, Ratko

2007-12-01

In order to identify biomotor systems that determine performance of competitive gymnastics elements in elementary school female sixth-graders, factor structures of morphological characteristics and basic motor abilities were determined first, followed by relations of the morphological-motor system factors obtained with a set of criterion variables evaluating specific motor skills in competitive gymnastics in 126 female children aged 12 years +/- 3 months. Factor analysis of 17 morphological measures yielded three morphological factors: factor of mesoendomorphy and/or adipose body voluminosity; factor of longitudinal body dimensionality; and factor of transverse arm dimensionality. Factor analysis of 16 motor variables produced four motor factors: general motoricity factor (motor system); general speed factor; factor of explosive strength of throwing type (arm explosiveness); and factor of arm and leg flexibility. Three significant canonical correlations, i.e. linear combinations, explained the association between the set of seven latent variables of the morphological and basic motor system, and five variables evaluating the knowledge in competitive gymnastics. The first canonical linear combination was based on a favorable and predominant impact of the general motor factor (a system integrating whole body coordination, leg explosiveness, relative arm strength, arm movement frequency and body flexibility) on performance of gymnastics elements, cartwheel, handstand and backward pullover mount in particular, and to a lesser extent front scale and double leg pirouette for 180 degrees. The relation of the second pair of canonical factors additionally explained the role of transverse dimensionality of arm skeleton, arm flexibility and explosiveness in performing cartwheel and squat vault, whereas the relation of the third pair of canonical factors explained the unfavorable impact of adipose voluminosity on the performance of squat vault and backward pullover mount.

Factorized Runge-Kutta-Chebyshev Methods

NASA Astrophysics Data System (ADS)

O'Sullivan, Stephen

2017-05-01

The second-order extended stability Factorized Runge-Kutta-Chebyshev (FRKC2) explicit schemes for the integration of large systems of PDEs with diffusive terms are presented. The schemes are simple to implement through ordered sequences of forward Euler steps with complex stepsizes, and easily parallelised for large scale problems on distributed architectures. Preserving 7 digits for accuracy at 16 digit precision, the schemes are theoretically capable of maintaining internal stability for acceleration factors in excess of 6000 with respect to standard explicit Runge-Kutta methods. The extent of the stability domain is approximately the same as that of RKC schemes, and a third longer than in the case of RKL2 schemes. Extension of FRKC methods to fourth-order, by both complex splitting and Butcher composition techniques, is also discussed. A publicly available implementation of FRKC2 schemes may be obtained from maths.dit.ie/frkc

Design study of beam position monitors for measuring second-order moments of charged particle beams

NASA Astrophysics Data System (ADS)

Yanagida, Kenichi; Suzuki, Shinsuke; Hanaki, Hirofumi

2012-01-01

This paper presents a theoretical investigation on the multipole moments of charged particle beams in two-dimensional polar coordinates. The theoretical description of multipole moments is based on a single-particle system that is expanded to a multiparticle system by superposition, i.e., summing over all single-particle results. This paper also presents an analysis and design method for a beam position monitor (BPM) that detects higher-order (multipole) moments of a charged particle beam. To calculate the electric fields, a numerical analysis based on the finite difference method was created and carried out. Validity of the numerical analysis was proven by comparing the numerical with the analytical results for a BPM with circular cross section. Six-electrode BPMs with circular and elliptical cross sections were designed for the SPring-8 linac. The results of the numerical calculations show that the second-order moment can be detected for beam sizes ≧420μm (circular) and ≧550μm (elliptical).

The Relationship Between Second Language Anxiety and International Nursing Students Stress

ERIC Educational Resources Information Center

Khawaja, Nigar G.; Chan, Sabrina; Stein, Georgia

2017-01-01

We examined the relationship between second language anxiety and international nursing student stress after taking into account the demographic, cognitive, and acculturative factors. International nursing students (N = 152) completed an online questionnaire battery. Hierarchical regression analysis revealed that spoken second language anxiety and…

Low-Energy Defibrillation Failure Correction is Possible Through Nonlinear Analysis of Spatiotemporal Arrhythmia Data

NASA Astrophysics Data System (ADS)

Simonotto, Jennifer; Furman, Michael; Beaver, Thomas; Spano, Mark; Kavanagh, Katherine; Iden, Jason; Hu, Gang; Ditto, William

2004-03-01

Explanted Porcine hearts were Langendorff-perfused, administered a voltage-sensitive fluorescent dye (Di-4-ANEPPS) and illuminated with a ND:Yag laser (532 nm); the change in fluorescence resulting from electrical activity on the heart surface was recorded with an 80 x 80 pixel CCD camera at 1000 frames per second. The heart was put into fibrillation with rapid ventricular pacing and shocks were administered close to the defibrillation threshold. Defibrillation failure data was analyzed using synchronization, space-time volume plots and recurrence quantification. Preliminary spatiotemporal synchronization results reveal a short window of time ( 1 second) after defibrillation failure in which the disordered electrical activity becomes ordered; this ordered period occurs 4-5 seconds after the defibrillation shock. Recurrence analysis of a single time series confirmed these results, thus opening the avenue for dynamic defibrillators that can detect an optimal window for cardioversion.

Applying causal mediation analysis to personality disorder research.

PubMed

Walters, Glenn D

2018-01-01

This article is designed to address fundamental issues in the application of causal mediation analysis to research on personality disorders. Causal mediation analysis is used to identify mechanisms of effect by testing variables as putative links between the independent and dependent variables. As such, it would appear to have relevance to personality disorder research. It is argued that proper implementation of causal mediation analysis requires that investigators take several factors into account. These factors are discussed under 5 headings: variable selection, model specification, significance evaluation, effect size estimation, and sensitivity testing. First, care must be taken when selecting the independent, dependent, mediator, and control variables for a mediation analysis. Some variables make better mediators than others and all variables should be based on reasonably reliable indicators. Second, the mediation model needs to be properly specified. This requires that the data for the analysis be prospectively or historically ordered and possess proper causal direction. Third, it is imperative that the significance of the identified pathways be established, preferably with a nonparametric bootstrap resampling approach. Fourth, effect size estimates should be computed or competing pathways compared. Finally, investigators employing the mediation method are advised to perform a sensitivity analysis. Additional topics covered in this article include parallel and serial multiple mediation designs, moderation, and the relationship between mediation and moderation. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Meta-Analysis of the English Version of the Beck Depression Inventory-Second Edition

ERIC Educational Resources Information Center

Erford, Bradley T.; Johnson, Erin; Bardoshi, Gerta

2016-01-01

This meta-analysis reviewed 144 studies from 1996 to 2013 using the Beck Depression Inventory-Second Edition. Internal consistency was 0.89 and test-retest reliability 0.75. Convergent comparisons were robust across 43 depression instruments. Structural validity supported both one- and two-factor solutions and diagnostic accuracy varied according…

[Optimization of one-step pelletization technology of Biqiu granules by Plackett-Burman design and Box-Behnken response surface methodology].

PubMed

Zhang, Yan-jun; Liu, Li-li; Hu, Jun-hua; Wu, Yun; Chao, En-xiang; Xiao, Wei

2015-11-01

First with the qualified rate of granules as the evaluation index, significant influencing factors were firstly screened by Plackett-Burman design. Then, with the qualified rate and moisture content as the evaluation indexes, significant factors that affect one-step pelletization technology were further optimized by Box-Behnken design; experimental data were imitated by multiple regression and second-order polynomial equation; and response surface method was used for predictive analysis of optimal technology. The best conditions were as follows: inlet air temperature of 85 degrees C, sample introduction speed of 33 r x min(-1), density of concrete 1. 10. One-step pelletization technology of Biqiu granules by Plackett-Burman design and Box-Behnken response surface methodology was stable and feasible with good predictability, which provided reliable basis for the industrialized production of Biqiu granules.

In situ analysis of DNA damage response and repair using laser microirradiation.

PubMed

Kim, Jong-Soo; Heale, Jason T; Zeng, Weihua; Kong, Xiangduo; Krasieva, Tatiana B; Ball, Alexander R; Yokomori, Kyoko

2007-01-01

A proper response to DNA damage is critical for the maintenance of genome integrity. However, it is difficult to study the in vivo kinetics and factor requirements of the damage recognition process in mammalian cells. In order to address how the cell reacts to DNA damage, we utilized a second harmonic (532 nm) pulsed Nd:YAG laser to induce highly concentrated damage in a small area in interphase cell nuclei and cytologically analyzed both protein recruitment and modification. Our results revealed for the first time the sequential recruitment of factors involved in two major DNA double-strand break (DSB) repair pathways, non-homologous end-joining (NHEJ) and homologous recombination (HR), and the cell cycle-specific recruitment of the sister chromatid cohesion complex cohesin to the damage site. In this chapter, the strategy developed to study the DNA damage response using the 532-nm Nd:YAG laser will be summarized.

Discrete effect on the halfway bounce-back boundary condition of multiple-relaxation-time lattice Boltzmann model for convection-diffusion equations.

PubMed

Cui, Shuqi; Hong, Ning; Shi, Baochang; Chai, Zhenhua

2016-04-01

In this paper, we will focus on the multiple-relaxation-time (MRT) lattice Boltzmann model for two-dimensional convection-diffusion equations (CDEs), and analyze the discrete effect on the halfway bounce-back (HBB) boundary condition (or sometimes called bounce-back boundary condition) of the MRT model where three different discrete velocity models are considered. We first present a theoretical analysis on the discrete effect of the HBB boundary condition for the simple problems with a parabolic distribution in the x or y direction, and a numerical slip proportional to the second-order of lattice spacing is observed at the boundary, which means that the MRT model has a second-order convergence rate in space. The theoretical analysis also shows that the numerical slip can be eliminated in the MRT model through tuning the free relaxation parameter corresponding to the second-order moment, while it cannot be removed in the single-relaxation-time model or the Bhatnagar-Gross-Krook model unless the relaxation parameter related to the diffusion coefficient is set to be a special value. We then perform some simulations to confirm our theoretical results, and find that the numerical results are consistent with our theoretical analysis. Finally, we would also like to point out the present analysis can be extended to other boundary conditions of lattice Boltzmann models for CDEs.

Scale invariance of temporal order discrimination using complex, naturalistic events

PubMed Central

Kwok, Sze Chai; Macaluso, Emiliano

2015-01-01

Recent demonstrations of scale invariance in cognitive domains prompted us to investigate whether a scale-free pattern might exist in retrieving the temporal order of events from episodic memory. We present four experiments using an encoding-retrieval paradigm with naturalistic stimuli (movies or video clips). Our studies show that temporal order judgement retrieval times were negatively correlated with the temporal separation between two events in the movie. This relation held, irrespective of whether temporal distances were on the order of tens of minutes (Exp 1−2) or just a few seconds (Exp 3−4). Using the SIMPLE model, we factored in the retention delays between encoding and retrieval (delays of 24 h, 15 min, 1.5–2.5 s, and 0.5 s for Exp 1–4, respectively) and computed a temporal similarity score for each trial. We found a positive relation between similarity and retrieval times; that is, the more temporally similar two events, the slower the retrieval of their temporal order. Using Bayesian analysis, we confirmed the equivalence of the RT/similarity relation across all experiments, which included a vast range of temporal distances and retention delays. These results provide evidence for scale invariance during the retrieval of temporal order of episodic memories. PMID:25909581

Bias of phencyclidine discrimination by the schedule of reinforcement.

PubMed Central

McMillan, D E; Wenger, G R

1984-01-01

Pigeons, trained to discriminate phencyclidine from saline under a procedure requiring the bird to track the location of a color, received cumulative doses of phencyclidine, pentobarbital, or d-amphetamine with a variety of schedules of reinforcement in effect (across phases). When the same second-order schedules were used to reinforce responding after either saline or phencyclidine administration, stimulus control by phencyclidine did not depend on the schedule parameter. When different second-order schedules were used that biased responding toward the phencyclidine-correlated key color, pigeons responded on the phencyclidine-correlated key at lower doses of phencyclidine and pentobarbital than when the second-order schedule biased responding toward the saline key color. A similar but less marked effect was obtained with d-amphetamine. Attempts to produce bias by changing reinforcement magnitude (duration of food availability) were less successful. A signal-detection analysis of dose-effect curves for phencyclidine under two of the second-order schedules employed suggested that at low doses of phencyclidine, response bias is a major determinant of responding. As doses were increased, position preferences occurred and response bias decreased; at higher doses both response bias and position preference decreased and discriminability increased. With low doses of pentobarbital, responding again was biased but increasing doses produced position preference with only small increases in discriminability. At low doses of d-amphetamine responding also was biased, but bias did not decrease consistently with dose nor did discriminability increase. These experiments suggest that the schedule of reinforcement can be used to bias responding toward or away from making the drug-correlated response in drug discrimination experiments, and that signal-detection analysis and analysis of responding at a position can be used to separate the discriminability of the drug state from other effects of the drug on responding. PMID:6481300

Analysis of variation matrix array by bilinear least squares-residual bilinearization (BLLS-RBL) for resolving and quantifying of foodstuff dyes in a candy sample.

PubMed

Asadpour-Zeynali, Karim; Maryam Sajjadi, S; Taherzadeh, Fatemeh; Rahmanian, Reza

2014-04-05

Bilinear least square (BLLS) method is one of the most suitable algorithms for second-order calibration. Original BLLS method is not applicable to the second order pH-spectral data when an analyte has more than one spectroscopically active species. Bilinear least square-residual bilinearization (BLLS-RBL) was developed to achieve the second order advantage for analysis of complex mixtures. Although the modified method is useful, the pure profiles cannot be obtained and only the linear combination will be obtained. Moreover, for prediction of analyte in an unknown sample, the original algorithm of RBL may diverge; instead of converging to the desired analyte concentrations. Therefore, Gauss Newton-RLB algorithm should be used, which is not as simple as original protocol. Also, the analyte concentration can be predicted on the basis of each of the equilibrating species of the component of interest that are not exactly the same. The aim of the present work is to tackle the non-uniqueness problem in the second order calibration of monoprotic acid mixtures and divergence of RBL. Each pH-absorbance matrix was pretreated by subtraction of the first spectrum from other spectra in the data set to produce full rank array that is called variation matrix. Then variation matrices were analyzed uniquely by original BLLS-RBL that is more parsimonious than its modified counterpart. The proposed method was performed on the simulated as well as the analysis of real data. Sunset yellow and Carmosine as monoprotic acids were determined in candy sample in the presence of unknown interference by this method. Copyright © 2013 Elsevier B.V. All rights reserved.

The assessment of mindfulness skills: the "what" and the "how".

PubMed

Iani, Luca; Lauriola, Marco; Cafaro, Valentina

2017-10-06

The five facets mindfulness questionnaire-short form (FFMQ-SF) is a new, brief measure for the assessment of mindfulness skills in clinical and nonclinical samples. The construct validity of the FFMQ-SF has not been previously assessed in community samples. The present study investigated the factor structure of the Italian version of the FFMQ-SF. Structured equation modeling was used to test the fit of three alternative models in a sample of highly educated adults (n = 211). A hierarchical model with a single second-order factor loaded by observing, describing, and acting with awareness (i.e. the mindfulness "what" skills) performed slightly better than both a five-factor model with correlated factors and a hierarchical model with a general second-order factor. The FFMQ-SF scores were significantly higher than those reported in both Dutch depressed patients and Australian undergraduate students for all facets (but nonreactivity for the Australian sample). Data support the multifaceted nature of mindfulness skills. Because of its brevity and simplicity of use, the FFMQ-SF is a promising questionnaire in longitudinal and clinical research. This questionnaire can serve as a guideline to help clinicians assess and monitor mindfulness skills acquisition, strengthening, and generalization, and prioritize mindfulness skills that need immediate attention.

Double Bragg Interferometry

NASA Astrophysics Data System (ADS)

Ahlers, H.; Müntinga, H.; Wenzlawski, A.; Krutzik, M.; Tackmann, G.; Abend, S.; Gaaloul, N.; Giese, E.; Roura, A.; Kuhl, R.; Lämmerzahl, C.; Peters, A.; Windpassinger, P.; Sengstock, K.; Schleich, W. P.; Ertmer, W.; Rasel, E. M.

2016-04-01

We employ light-induced double Bragg diffraction of delta-kick collimated Bose-Einstein condensates to create three symmetric Mach-Zehnder interferometers. They rely on (i) first-order, (ii) two successive first-order, and (iii) second-order processes which demonstrate the scalability of the corresponding momentum transfer. With respect to devices based on conventional Bragg scattering, these symmetric interferometers double the scale factor and feature a better suppression of noise and systematic uncertainties intrinsic to the diffraction process. Moreover, we utilize these interferometers as tiltmeters for monitoring their inclination with respect to gravity.

Principle Study of Head Meridian Acupoint Massage to Stress Release via Grey Data Model Analysis.

PubMed

Lee, Ya-Ting

2016-01-01

This paper presents the scientific study of the effectiveness and action principle of head meridian acupoint massage by applying the grey data model analysis approach. First, the head massage procedure for massaging the important head meridian acupuncture points including Taiyang, Fengfu, Tianzhu, Fengqi, and Jianjing is formulated in a standard manner. Second, the status of the autonomic nervous system of each subject is evaluated by using the heart rate variability analyzer before and after the head massage following four weeks. Afterward, the physiological factors of autonomic nerves are quantitatively analyzed by using the grey data modeling theory. The grey data analysis can point out that the status of autonomic nervous system is greatly improved after the massage. The order change of the grey relationship weighting of physiological factors shows the action principle of the sympathetic and parasympathetic nerves when performing head massage. In other words, the grey data model is able to distinguish the detailed interaction of the autonomic nervous system and the head meridian acupoint massage. Thus, the stress relaxing effect of massaging head meridian acupoints is proved, which is lacked in literature. The results can be a reference principle for massage health care in practice.

Principle Study of Head Meridian Acupoint Massage to Stress Release via Grey Data Model Analysis

PubMed Central

Lee, Ya-Ting

2016-01-01

This paper presents the scientific study of the effectiveness and action principle of head meridian acupoint massage by applying the grey data model analysis approach. First, the head massage procedure for massaging the important head meridian acupuncture points including Taiyang, Fengfu, Tianzhu, Fengqi, and Jianjing is formulated in a standard manner. Second, the status of the autonomic nervous system of each subject is evaluated by using the heart rate variability analyzer before and after the head massage following four weeks. Afterward, the physiological factors of autonomic nerves are quantitatively analyzed by using the grey data modeling theory. The grey data analysis can point out that the status of autonomic nervous system is greatly improved after the massage. The order change of the grey relationship weighting of physiological factors shows the action principle of the sympathetic and parasympathetic nerves when performing head massage. In other words, the grey data model is able to distinguish the detailed interaction of the autonomic nervous system and the head meridian acupoint massage. Thus, the stress relaxing effect of massaging head meridian acupoints is proved, which is lacked in literature. The results can be a reference principle for massage health care in practice. PMID:26904144

Factors affecting economies of scale in combined sewer systems.

PubMed

Maurer, Max; Wolfram, Martin; Anja, Herlyn

2010-01-01

A generic model is introduced that represents the combined sewer infrastructure of a settlement quantitatively. A catchment area module first calculates the length and size distribution of the required sewer pipes on the basis of rain patterns, housing densities and area size. These results are fed into the sewer-cost module in order to estimate the combined sewer costs of the entire catchment area. A detailed analysis of the relevant input parameters for Swiss settlements is used to identify the influence of size on costs. The simulation results confirm that an economy of scale exists for combined sewer systems. This is the result of two main opposing cost factors: (i) increased construction costs for larger sewer systems due to larger pipes and increased rain runoff in larger settlements, and (ii) lower costs due to higher population and building densities in larger towns. In Switzerland, the more or less organically grown settlement structures and limited land availability emphasise the second factor to show an apparent economy of scale. This modelling approach proved to be a powerful tool for understanding the underlying factors affecting the cost structure for water infrastructures.

Spatial analysis for susceptibility of second-time karst sinkholes: A case study of Jili Village in Guangxi, China

NASA Astrophysics Data System (ADS)

Zhou, Guoqing; Yan, Hongbo; Chen, Kunhua; Zhang, Rongting

2016-04-01

After a big karst sinkhole happened in Jili Village of Guangxi, China, the local government was eager to quantitatively analyze and map susceptible areas of the potential second-time karst sinkholes in order to make timely decisions whether the residents living in the first-time sinkhole areas should move. For this reason, karst sinkholes susceptibility geospatial analysis is investigated using multivariate spatial data, logistic regression model (LRM) and Geographical Information System (GIS). Ten major karst sinkholes related factors, including (1) formation lithology, (2) soil structure, (3) profile curvature, (4) groundwater depth, (5) fluctuation of groundwater level, (6) percolation rate of soil, (7) degree of karst development, (8) distance from fault, (9) distance from the traffic route, and (10) overburden thickness were selected, and then each of factors was classified and quantitated with the three or four levels. The LRM was applied to evaluate which factor makes significant contributions to sinkhole. The results demonstrated that formation lithology, soil structure, profile curvature, groundwater depth, ground water level, percolation rate of soil, and degree of karst development, the distance from fault, and overburden thickness are positive, while one factor, the distance from traffic routes is negative, which is deleted from LRM model. The susceptibility of the potential sinkholes in the study area is estimated and mapped using the solved impact factors. The susceptible degrees of the study area are classified into five levels, very high, high, moderate, low, and ignore susceptibility. It has been found that that both very high and high susceptibility areas are along Datou Hill and the foothills of the study area. This finding is verified by field observations. With the investigations conducted in this paper, it can be concluded that the susceptibility maps produced in this paper are reliable and accurate, and useful as a reference for local governments to make decisions regarding whether or not residents living within sinkhole areas should move.

Applying a Danish Version of the Learning Transfer System Inventory and Testing It for Different Types of Education

ERIC Educational Resources Information Center

Soerensen, Peter; Stegeager, Nikolaj; Bates, Reid

2017-01-01

The purpose of this study was to answer two research questions. First, will an exploratory factor analysis of a Danish version of the Learning Transfer System Inventory (LTSI) result in a factor structure which is consistent with the original American LTSI factor structure? Second, does the mean score in the factor analysis vary in a statistically…

Review of factors affecting sustainability in the universities

NASA Astrophysics Data System (ADS)

Ajilian, Hosna

Understanding the factors which influence adopting sustainability practices in IHE is an important issue to develop more effective sustainability's methods and policies. The focus of this research is to find out a meaningful relationship between adopting sustainability practices and some of the characteristics of institutions of higher education (IHE). IHE can be considered as the best place to promote sustainability and develop the culture of sustainability in society. Thus, this research is conducted to help developing sustainability in IHE which have significant direct and indirect impact on society and the environment. First, the sustainability letter grades were derived from "Greenreportcard.org" which have been produced based on an evaluation of each school in nine main categories including: Administration, Climate Change & Energy, Food & Recycling, etc. In the next step, the characteristics of IHE as explanatory variables were chosen from "The Integrated Postsecondary Education Data System" (IPEDS) and respective database was implemented in STATA Software. Finally, the "ordered-Probit Model" is used through STATA to analyze the impact of some IHE's factor on adopting sustainability practices on campus. The results of this analysis indicate that variables related to "Financial support" category are the most influential factors in determining the sustainability status of the university. "The university features" with two significant variables for "Selectivity" and "Top 50 LA" can be classified as the second influential category in this table, although the "Student influence" is also eligible to be ranked as the second important factor. Finally, the "Location feature" of university was determined with the least influential impact on the sustainability of campuses.

Sampling factors influencing accuracy of sperm kinematic analysis.

PubMed

Owen, D H; Katz, D F

1993-01-01

Sampling conditions that influence the accuracy of experimental measurement of sperm head kinematics were studied by computer simulation methods. Several archetypal sperm trajectories were studied. First, mathematical models of typical flagellar beats were input to hydrodynamic equations of sperm motion. The instantaneous swimming velocities of such sperm were computed over sequences of flagellar beat cycles, from which the resulting trajectories were determined. In a second, idealized approach, direct mathematical models of trajectories were utilized, based upon similarities to the previous hydrodynamic constructs. In general, it was found that analyses of sampling factors produced similar results for the hydrodynamic and idealized trajectories. A number of experimental sampling factors were studied, including the number of sperm head positions measured per flagellar beat, and the time interval over which these measurements are taken. It was found that when one flagellar beat is sampled, values of amplitude of lateral head displacement (ALH) and linearity (LIN) approached their actual values when five or more sample points per beat were taken. Mean angular displacement (MAD) values, however, remained sensitive to sampling rate even when large sampling rates were used. Values of MAD were also much more sensitive to the initial starting point of the sampling procedure than were ALH or LIN. On the basis of these analyses of measurement accuracy for individual sperm, simulations were then performed of cumulative effects when studying entire populations of motile cells. It was found that substantial (double digit) errors occurred in the mean values of curvilinear velocity (VCL), LIN, and MAD under the conditions of 30 video frames per second and 0.5 seconds of analysis time. Increasing the analysis interval to 1 second did not appreciably improve the results. However, increasing the analysis rate to 60 frames per second significantly reduced the errors. These findings thus suggest that computer-aided sperm analysis (CASA) application at 60 frames per second will significantly improve the accuracy of kinematic analysis in most applications to human and other mammalian sperm.

A new unequal-weighted triple-frequency first order ionosphere correction algorithm and its application in COMPASS

NASA Astrophysics Data System (ADS)

Liu, WenXiang; Mou, WeiHua; Wang, FeiXue

2012-03-01

As the introduction of triple-frequency signals in GNSS, the multi-frequency ionosphere correction technology has been fast developing. References indicate that the triple-frequency second order ionosphere correction is worse than the dual-frequency first order ionosphere correction because of the larger noise amplification factor. On the assumption that the variances of three frequency pseudoranges were equal, other references presented the triple-frequency first order ionosphere correction, which proved worse or better than the dual-frequency first order correction in different situations. In practice, the PN code rate, carrier-to-noise ratio, parameters of DLL and multipath effect of each frequency are not the same, so three frequency pseudorange variances are unequal. Under this consideration, a new unequal-weighted triple-frequency first order ionosphere correction algorithm, which minimizes the variance of the pseudorange ionosphere-free combination, is proposed in this paper. It is found that conventional dual-frequency first-order correction algorithms and the equal-weighted triple-frequency first order correction algorithm are special cases of the new algorithm. A new pseudorange variance estimation method based on the three carrier combination is also introduced. Theoretical analysis shows that the new algorithm is optimal. The experiment with COMPASS G3 satellite observations demonstrates that the ionosphere-free pseudorange combination variance of the new algorithm is smaller than traditional multi-frequency correction algorithms.

Using Birth Order and Sibling Dynamics in Career Counseling.

ERIC Educational Resources Information Center

Bradley, Richard W.

1982-01-01

Discusses birth order as a determinant of occupational roles. Considers the first- and second-born experience in relation to occupational status and choice. Explores sibling dynamics and the need for striving for significance in the family. Discusses identification and analysis of family constellations. (RC)

Sensitivity analysis of periodic errors in heterodyne interferometry

NASA Astrophysics Data System (ADS)

Ganguly, Vasishta; Kim, Nam Ho; Kim, Hyo Soo; Schmitz, Tony

2011-03-01

Periodic errors in heterodyne displacement measuring interferometry occur due to frequency mixing in the interferometer. These nonlinearities are typically characterized as first- and second-order periodic errors which cause a cyclical (non-cumulative) variation in the reported displacement about the true value. This study implements an existing analytical periodic error model in order to identify sensitivities of the first- and second-order periodic errors to the input parameters, including rotational misalignments of the polarizing beam splitter and mixing polarizer, non-orthogonality of the two laser frequencies, ellipticity in the polarizations of the two laser beams, and different transmission coefficients in the polarizing beam splitter. A local sensitivity analysis is first conducted to examine the sensitivities of the periodic errors with respect to each input parameter about the nominal input values. Next, a variance-based approach is used to study the global sensitivities of the periodic errors by calculating the Sobol' sensitivity indices using Monte Carlo simulation. The effect of variation in the input uncertainty on the computed sensitivity indices is examined. It is seen that the first-order periodic error is highly sensitive to non-orthogonality of the two linearly polarized laser frequencies, while the second-order error is most sensitive to the rotational misalignment between the laser beams and the polarizing beam splitter. A particle swarm optimization technique is finally used to predict the possible setup imperfections based on experimentally generated values for periodic errors.

A Confirmatory Factor Analysis of the California Verbal Learning Test-Second Edition (CVLT-II) in the Standardization Sample

ERIC Educational Resources Information Center

Donders, Jacobus

2008-01-01

The purpose of this study is to determine the latent structure of the California Verbal Learning Test-Second Edition (CVLT-II; Delis, Kramer, Kaplan, & Ober, 2000) at three different age levels, using the standardization sample. Maximum likelihood confirmatory factor analyses are performed to test four competing hypothetical models for fit and…

General Factor Loadings and Specific Effects of the Differential Ability Scales, Second Edition Composites

ERIC Educational Resources Information Center

Maynard, Jennifer L.; Floyd, Randy G.; Acklie, Teresa J.; Houston, Lawrence, III

2011-01-01

The purpose of this study was to investigate the "g" loadings and specific effects of the core and diagnostic composite scores from the Differential Abilities Scales, Second Edition (DAS-II; Elliott, 2007a). Scores from a subset of the DAS-II standardization sample for ages 3:6 to 17:11 were submitted to principal factor analysis. Four…

A new mode of contrast in biological second harmonic generation microscopy.

PubMed

Green, Nicola H; Delaine-Smith, Robin M; Askew, Hannah J; Byers, Robert; Reilly, Gwendolen C; Matcher, Stephen J

2017-10-17

Enhanced image contrast in biological second harmonic imaging microscopy (SHIM) has previously been reported via quantitative assessments of forward- to epi-generated signal intensity ratio and by polarization analysis. Here we demonstrate a new form of contrast: the material-specific, wavelength-dependence of epi-generated second harmonic generation (SHG) excitation efficiency, and discriminate collagen and myosin by ratiometric epi-generated SHG images at 920 nm and 860 nm. Collagen shows increased SHG intensity at 920 nm, while little difference is detected between the two for myosin; allowing SHIM to characterize different SHG-generating components within a complex biological sample. We propose that momentum-space mapping of the second-order non-linear structure factor is the source of this contrast and develop a model for the forward and epi-generated SHG wavelength-dependence. Our model demonstrates that even very small changes in the assumed material fibrillar structure can produce large changes in the wavelength-dependency of epi-generated SHG. However, in the case of forward SHG, although the same changes impact upon absolute intensity at a given wavelength, they have very little effect on wavelength-dependency beyond the expected monotonic fall. We also propose that this difference between forward and epi-generated SHG provides an explanation for many of the wavelength-dependency discrepancies in the published literature.

Spectroscopic, DFT and Z-scan supported investigation of dicyanoisophorone based push-pull NLOphoric styryl dyes

NASA Astrophysics Data System (ADS)

Erande, Yogesh; Sreenath, Mavila C.; Chitrambalam, Subramaniyan; Joe, Isaac H.; Sekar, Nagaiyan

2017-04-01

The dicyanoisophorone acceptor based NLOphores with Intramolecular Charge Transfer (ICT) character are newly synthesised, characterised and explored for linear and non linear optical (NLO) property investigation. Strong ICT character of these D-π-A styryl NLOphores is established with support of emission solvatochromism, polarity functions and Generalised Mulliken Hush (GMH) analysis. First, second and third order polarizability of these NLOphores is investigated by spectroscopic and TDDFT computational approach using CAM/B3LYP-6-311 + g (d, p) method. BLA and BOA values of these chromophores are evaluated from ground and excited state optimized geometries and found that the respective structures are approaching towards cyanine limit. Third order nonlinear susceptibility (X(3)) along with nonlinear absorption coefficient (β) and nonlinear refraction (n2) are evaluated for these NLOphores using Z-scan experiment. All four chromophores exhibit large polarization anisotropy (Δα), first order hyperpolarizability (β0), second order hyperpolarizability (γ) and third order nonlinear susceptibility (X(3)). TGA analysis proved these NLOphores are stable up to 320 °C and hence can be used in device fabrication.

Investigation of magnetic and magneto-transport properties of ferromagnetic-charge ordered core-shell nanostructures

NASA Astrophysics Data System (ADS)

Das, Kalipada

2017-10-01

In our present study, we address in detail the magnetic and magneto-transport properties of ferromagnetic-charge ordered core-shell nanostructures. In these core-shell nanostructures, well-known half metallic La0.67Sr0.33MnO3 nanoparticles (average particle size, ˜20 nm) are wrapped by the charge ordered antiferromagnetic Pr0.67Ca0.33MnO3 (PCMO) matrix. The intrinsic properties of PCMO markedly modify it into such a core-shell form. The robustness of the PCMO matrix becomes fragile and melts at an external magnetic field (H) of ˜20 kOe. The analysis of magneto-transport data indicates the systematic reduction of the electron-electron and electron-magnon interactions in the presence of an external magnetic field in these nanostructures. The pronounced training effect appears in this phase separated compound, which was analyzed by considering the second order tunneling through the grain boundaries of the nanostructures. Additionally, the analysis of low field magnetoconductance data supports the second order tunneling and shows the close value of the universal limit (˜1.33).

Assessment of groundwater vulnerability to pollution: a combination of GIS, fuzzy logic and decision making techniques

NASA Astrophysics Data System (ADS)

Gemitzi, Alexandra; Petalas, Christos; Tsihrintzis, Vassilios A.; Pisinaras, Vassilios

2006-03-01

The assessment of groundwater vulnerability to pollution aims at highlighting areas at a high risk of being polluted. This study presents a methodology, to estimate the risk of an aquifer to be polluted from concentrated and/or dispersed sources, which applies an overlay and index method involving several parameters. The parameters are categorized into three factor groups: factor group 1 includes parameters relevant to the internal aquifer system’s properties, thus determining the intrinsic aquifer vulnerability to pollution; factor group 2 comprises parameters relevant to the external stresses to the system, such as human activities and rainfall effects; factor group 3 incorporates specific geological settings, such as the presence of geothermal fields or salt intrusion zones, into the computation process. Geographical information systems have been used for data acquisition and processing, coupled with a multicriteria evaluation technique enhanced with fuzzy factor standardization. Moreover, besides assigning weights to factors, a second set of weights, i.e., order weights, has been applied to factors on a pixel by pixel basis, thus allowing control of the level of risk in the vulnerability determination and the enhancement of local site characteristics. Individual analysis of each factor group resulted in three intermediate groundwater vulnerability to pollution maps, which were combined in order to produce the final composite groundwater vulnerability map for the study area. The method has been applied in the region of Eastern Macedonia and Thrace (Northern Greece), an area of approximately 14,000 km2. The methodology has been tested and calibrated against the measured nitrate concentration in wells, in the northwest part of the study area, providing results related to the aggregation and weighting procedure.

A comparison study on detection of key geochemical variables and factors through three different types of factor analysis

NASA Astrophysics Data System (ADS)

Hoseinzade, Zohre; Mokhtari, Ahmad Reza

2017-10-01

Large numbers of variables have been measured to explain different phenomena. Factor analysis has widely been used in order to reduce the dimension of datasets. Additionally, the technique has been employed to highlight underlying factors hidden in a complex system. As geochemical studies benefit from multivariate assays, application of this method is widespread in geochemistry. However, the conventional protocols in implementing factor analysis have some drawbacks in spite of their advantages. In the present study, a geochemical dataset including 804 soil samples collected from a mining area in central Iran in order to search for MVT type Pb-Zn deposits was considered to outline geochemical analysis through various fractal methods. Routine factor analysis, sequential factor analysis, and staged factor analysis were applied to the dataset after opening the data with (additive logratio) alr-transformation to extract mineralization factor in the dataset. A comparison between these methods indicated that sequential factor analysis has more clearly revealed MVT paragenesis elements in surface samples with nearly 50% variation in F1. In addition, staged factor analysis has given acceptable results while it is easy to practice. It could detect mineralization related elements while larger factor loadings are given to these elements resulting in better pronunciation of mineralization.

Analytical development of disturbed matrix eigenvalue problem applied to mixed convection stability analysis in Darcy media

NASA Astrophysics Data System (ADS)

Hamed, Haikel Ben; Bennacer, Rachid

2008-08-01

This work consists in evaluating algebraically and numerically the influence of a disturbance on the spectral values of a diagonalizable matrix. Thus, two approaches will be possible; to use the theorem of disturbances of a matrix depending on a parameter, due to Lidskii and primarily based on the structure of Jordan of the no disturbed matrix. The second approach consists in factorizing the matrix system, and then carrying out a numerical calculation of the roots of the disturbances matrix characteristic polynomial. This problem can be a standard model in the equations of the continuous media mechanics. During this work, we chose to use the second approach and in order to illustrate the application, we choose the Rayleigh-Bénard problem in Darcy media, disturbed by a filtering through flow. The matrix form of the problem is calculated starting from a linear stability analysis by a finite elements method. We show that it is possible to break up the general phenomenon into other elementary ones described respectively by a disturbed matrix and a disturbance. A good agreement between the two methods was seen. To cite this article: H.B. Hamed, R. Bennacer, C. R. Mecanique 336 (2008).

Research on the relationship between the elements and pharmacological activities in velvet antler using factor analysis and cluster analysis

NASA Astrophysics Data System (ADS)

Zhou, Libing

2017-04-01

Velvet antler has certain effect on improving the body's immune cells and the regulation of immune system function, nervous system, anti-stress, anti-aging and osteoporosis. It has medicinal applications to treat a wide range of diseases such as tissue wound healing, anti-tumor, cardiovascular disease, et al. Therefore, the research on the relationship between pharmacological activities and elements in velvet antler is of great significance. The objective of this study was to comprehensively evaluate 15 kinds of elements in different varieties of velvet antlers and study on the relationship between the elements and traditional Chinese medicine efficacy for the human. The factor analysis and the factor cluster analysis methods were used to analyze the data of elements in the sika velvet antler, cervus elaphus linnaeus, flower horse hybrid velvet antler, apiti (elk) velvet antler, male reindeer velvet antler and find out the relationship between 15 kinds of elements including Ca, P, Mg, Na, K, Fe, Cu, Mn, Al, Ba, Co, Sr, Cr, Zn and Ni. Combining with MATLAB2010 and SPSS software, the chemometrics methods were made on the relationship between the elements in velvet antler and the pharmacological activities. The first commonality factor F1 had greater load on the indexes of Ca, P, Mg, Co, Sr and Ni, and the second commonality factor F2 had greater load on the indexes of K, Mn, Zn and Cr, and the third commonality factor F3 had greater load on the indexes of Na, Cu and Ba, and the fourth commonality factor F4 had greater load on the indexes of Fe and Al. 15 kinds of elements in velvet antler in the order were elk velvet antler>flower horse hybrid velvet antler>cervus elaphus linnaeus>sika velvet antler>male reindeer velvet antler. Based on the factor analysis and the factor cluster analysis, a model for evaluating traditional Chinese medicine quality was constructed. These studies provide the scientific base and theoretical foundation for the future large-scale rational relation development of velvet antler resources as well as the relationship between the elements and traditional Chinese medicine efficacy for the human.

SCL-90-R emotional distress ratings in substance use and impulse control disorders: One-factor, oblique first-order, higher-order, and bi-factor models compared.

PubMed

Arrindell, Willem A; Urbán, Róbert; Carrozzino, Danilo; Bech, Per; Demetrovics, Zsolt; Roozen, Hendrik G

2017-09-01

To fully understand the dimensionality of an instrument in a certain population, rival bi-factor models should be routinely examined and tested against oblique first-order and higher-order structures. The present study is among the very few studies that have carried out such a comparison in relation to the Symptom Checklist-90-R. In doing so, it utilized a sample comprising 2593 patients with substance use and impulse control disorders. The study also included a test of a one-dimensional model of general psychological distress. Oblique first-order factors were based on the original a priori 9-dimensional model advanced by Derogatis (1977); and on an 8-dimensional model proposed by Arrindell and Ettema (2003)-Agoraphobia, Anxiety, Depression, Somatization, Cognitive-performance deficits, Interpersonal sensitivity and mistrust, Acting-out hostility, and Sleep difficulties. Taking individual symptoms as input, three higher-order models were tested with at the second-order levels either (1) General psychological distress; (2) 'Panic with agoraphobia', 'Depression' and 'Extra-punitive behavior'; or (3) 'Irritable-hostile depression' and 'Panic with agoraphobia'. In line with previous studies, no support was found for the one-factor model. Bi-factor models were found to fit the dataset best relative to the oblique first-order and higher-order models. However, oblique first-order and higher-order factor models also fit the data fairly well in absolute terms. Higher-order solution (2) provided support for R.F. Krueger's empirical model of psychopathology which distinguishes between fear, distress, and externalizing factors (Krueger, 1999). The higher-order model (3), which combines externalizing and distress factors (Irritable-hostile depression), fit the data numerically equally well. Overall, findings were interpreted as supporting the hypothesis that the prevalent forms of symptomatology addressed have both important common and unique features. Proposals were made to improve the Depression subscale as its scores represent more of a very common construct as is measured with the severity (total) scale than of a specific measure that purports to measure what it should assess-symptoms of depression. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Semi-Analytic Reconstruction of Flux in Finite Volume Formulations

NASA Technical Reports Server (NTRS)

Gnoffo, Peter A.

2006-01-01

Semi-analytic reconstruction uses the analytic solution to a second-order, steady, ordinary differential equation (ODE) to simultaneously evaluate the convective and diffusive flux at all interfaces of a finite volume formulation. The second-order ODE is itself a linearized approximation to the governing first- and second- order partial differential equation conservation laws. Thus, semi-analytic reconstruction defines a family of formulations for finite volume interface fluxes using analytic solutions to approximating equations. Limiters are not applied in a conventional sense; rather, diffusivity is adjusted in the vicinity of changes in sign of eigenvalues in order to achieve a sufficiently small cell Reynolds number in the analytic formulation across critical points. Several approaches for application of semi-analytic reconstruction for the solution of one-dimensional scalar equations are introduced. Results are compared with exact analytic solutions to Burger s Equation as well as a conventional, upwind discretization using Roe s method. One approach, the end-point wave speed (EPWS) approximation, is further developed for more complex applications. One-dimensional vector equations are tested on a quasi one-dimensional nozzle application. The EPWS algorithm has a more compact difference stencil than Roe s algorithm but reconstruction time is approximately a factor of four larger than for Roe. Though both are second-order accurate schemes, Roe s method approaches a grid converged solution with fewer grid points. Reconstruction of flux in the context of multi-dimensional, vector conservation laws including effects of thermochemical nonequilibrium in the Navier-Stokes equations is developed.

The structure of paranoia in the general population.

PubMed

Bebbington, Paul E; McBride, Orla; Steel, Craig; Kuipers, Elizabeth; Radovanovic, Mirjana; Brugha, Traolach; Jenkins, Rachel; Meltzer, Howard I; Freeman, Daniel

2013-06-01

Psychotic phenomena appear to form a continuum with normal experience and beliefs, and may build on common emotional interpersonal concerns. We tested predictions that paranoid ideation is exponentially distributed and hierarchically arranged in the general population, and that persecutory ideas build on more common cognitions of mistrust, interpersonal sensitivity and ideas of reference. Items were chosen from the Structured Clinical Interview for DSM-IV Axis II Disorders (SCID-II) questionnaire and the Psychosis Screening Questionnaire in the second British National Survey of Psychiatric Morbidity (n = 8580), to test a putative hierarchy of paranoid development using confirmatory factor analysis, latent class analysis and factor mixture modelling analysis. Different types of paranoid ideation ranged in frequency from less than 2% to nearly 30%. Total scores on these items followed an almost perfect exponential distribution (r = 0.99). Our four a priori first-order factors were corroborated (interpersonal sensitivity; mistrust; ideas of reference; ideas of persecution). These mapped onto four classes of individual respondents: a rare, severe, persecutory class with high endorsement of all item factors, including persecutory ideation; a quasi-normal class with infrequent endorsement of interpersonal sensitivity, mistrust and ideas of reference, and no ideas of persecution; and two intermediate classes, characterised respectively by relatively high endorsement of items relating to mistrust and to ideas of reference. The paranoia continuum has implications for the aetiology, mechanisms and treatment of psychotic disorders, while confirming the lack of a clear distinction from normal experiences and processes.

Second-Order Analysis of Semiparametric Recurrent Event Processes

PubMed Central

Guan, Yongtao

2011-01-01

Summary A typical recurrent event dataset consists of an often large number of recurrent event processes, each of which contains multiple event times observed from an individual during a followup period. Such data have become increasingly available in medical and epidemiological studies. In this paper, we introduce novel procedures to conduct second-order analysis for a flexible class of semiparametric recurrent event processes. Such an analysis can provide useful information regarding the dependence structure within each recurrent event process. Specifically, we will use the proposed procedures to test whether the individual recurrent event processes are all Poisson processes and to suggest sensible alternative models for them if they are not. We apply these procedures to a well-known recurrent event dataset on chronic granulomatous disease and an epidemiological dataset on Meningococcal disease cases in Merseyside, UK to illustrate their practical value. PMID:21361885

Collagen morphology and texture analysis: from statistics to classification

PubMed Central

Mostaço-Guidolin, Leila B.; Ko, Alex C.-T.; Wang, Fei; Xiang, Bo; Hewko, Mark; Tian, Ganghong; Major, Arkady; Shiomi, Masashi; Sowa, Michael G.

2013-01-01

In this study we present an image analysis methodology capable of quantifying morphological changes in tissue collagen fibril organization caused by pathological conditions. Texture analysis based on first-order statistics (FOS) and second-order statistics such as gray level co-occurrence matrix (GLCM) was explored to extract second-harmonic generation (SHG) image features that are associated with the structural and biochemical changes of tissue collagen networks. Based on these extracted quantitative parameters, multi-group classification of SHG images was performed. With combined FOS and GLCM texture values, we achieved reliable classification of SHG collagen images acquired from atherosclerosis arteries with >90% accuracy, sensitivity and specificity. The proposed methodology can be applied to a wide range of conditions involving collagen re-modeling, such as in skin disorders, different types of fibrosis and muscular-skeletal diseases affecting ligaments and cartilage. PMID:23846580

Athermal operation of silicon waveguides: spectral, second order and footprint dependencies.

PubMed

Raghunathan, Vivek; Ye, Winnie N; Hu, Juejun; Izuhara, Tomoyuki; Michel, Jurgen; Kimerling, Lionel

2010-08-16

We report the design criteria and performance of Si ring resonators for passive athermal applications in wavelength division multiplexing (WDM). The waveguide design rules address i) positive-negative thermo-optic (TO) composite structures, ii) resonant wavelength dependent geometry to achieve constant confinement factor (Gamma), and iii) observation of small residual second order effects. We develop exact design requirements for a temperature dependent resonant wavelength shift (TDWS) of 0 pm/K and present prototype TDWS performance of 0.5 pm/K. We evaluate the materials selection tradeoffs between high-index contrast (HIC) and low-index contrast (LIC) systems and show, remarkably, that FSR and footprint become comparable under the constraint of athermal design.

Multi-scale approaches for high-speed imaging and analysis of large neural populations

PubMed Central

Ahrens, Misha B.; Yuste, Rafael; Peterka, Darcy S.; Paninski, Liam

2017-01-01

Progress in modern neuroscience critically depends on our ability to observe the activity of large neuronal populations with cellular spatial and high temporal resolution. However, two bottlenecks constrain efforts towards fast imaging of large populations. First, the resulting large video data is challenging to analyze. Second, there is an explicit tradeoff between imaging speed, signal-to-noise, and field of view: with current recording technology we cannot image very large neuronal populations with simultaneously high spatial and temporal resolution. Here we describe multi-scale approaches for alleviating both of these bottlenecks. First, we show that spatial and temporal decimation techniques based on simple local averaging provide order-of-magnitude speedups in spatiotemporally demixing calcium video data into estimates of single-cell neural activity. Second, once the shapes of individual neurons have been identified at fine scale (e.g., after an initial phase of conventional imaging with standard temporal and spatial resolution), we find that the spatial/temporal resolution tradeoff shifts dramatically: after demixing we can accurately recover denoised fluorescence traces and deconvolved neural activity of each individual neuron from coarse scale data that has been spatially decimated by an order of magnitude. This offers a cheap method for compressing this large video data, and also implies that it is possible to either speed up imaging significantly, or to “zoom out” by a corresponding factor to image order-of-magnitude larger neuronal populations with minimal loss in accuracy or temporal resolution. PMID:28771570

First- and second-order sensitivity analysis of linear and nonlinear structures

NASA Technical Reports Server (NTRS)

Haftka, R. T.; Mroz, Z.

1986-01-01

This paper employs the principle of virtual work to derive sensitivity derivatives of structural response with respect to stiffness parameters using both direct and adjoint approaches. The computations required are based on additional load conditions characterized by imposed initial strains, body forces, or surface tractions. As such, they are equally applicable to numerical or analytical solution techniques. The relative efficiency of various approaches for calculating first and second derivatives is assessed. It is shown that for the evaluation of second derivatives the most efficient approach is one that makes use of both the first-order sensitivities and adjoint vectors. Two example problems are used for demonstrating the various approaches.

Removal of Congo Red from Aqueous Solution by Anion Exchange Membrane (EBTAC): Adsorption Kinetics and Themodynamics.

PubMed

Khan, Muhammad Imran; Akhtar, Shahbaz; Zafar, Shagufta; Shaheen, Aqeela; Khan, Muhammad Ali; Luque, Rafael; Rehman, Aziz Ur

2015-07-08

The adsorption behavior of anionic dye congo red (CR) from aqueous solutions using an anion exchange membrane (EBTAC) has been investigated at room temperature. The effect of several factors including contact time, membrane dosage, ionic strength and temperature were studied. Kinetic models, namely pseudo-first-order and pseudo-second-order, liquid film diffusion and Elovich models as well as Bangham and modified freundlich Equations, were employed to evaluate the experimental results. Parameters such as adsorption capacities, rate constant and related correlation coefficients for every model were calculated and discussed. The adsorption of CR on anion exchange membranes followed pseudo-second-order Kinetics. Thermodynamic parameters, namely changes in Gibbs free energy ( ∆G° ), enthalpy ( ∆H° ) and entropy ( ∆S° ) were calculated for the adsorption of congo red, indicating an exothermic process.

Removal of Congo Red from Aqueous Solution by Anion Exchange Membrane (EBTAC): Adsorption Kinetics and Themodynamics

PubMed Central

Khan, Muhammad Imran; Akhtar, Shahbaz; Zafar, Shagufta; Shaheen, Aqeela; Khan, Muhammad Ali; Luque, Rafael; ur Rehman, Aziz

2015-01-01

The adsorption behavior of anionic dye congo red (CR) from aqueous solutions using an anion exchange membrane (EBTAC) has been investigated at room temperature. The effect of several factors including contact time, membrane dosage, ionic strength and temperature were studied. Kinetic models, namely pseudo-first-order and pseudo-second-order, liquid film diffusion and Elovich models as well as Bangham and modified freundlich Equations, were employed to evaluate the experimental results. Parameters such as adsorption capacities, rate constant and related correlation coefficients for every model were calculated and discussed. The adsorption of CR on anion exchange membranes followed pseudo-second-order Kinetics. Thermodynamic parameters, namely changes in Gibbs free energy (∆G°), enthalpy (∆H°) and entropy (∆S°) were calculated for the adsorption of congo red, indicating an exothermic process. PMID:28793430

Second-line chemotherapy in advanced biliary cancer progressed to first-line platinum-gemcitabine combination: a multicenter survey and pooled analysis with published data.

PubMed

Fornaro, Lorenzo; Vivaldi, Caterina; Cereda, Stefano; Leone, Francesco; Aprile, Giuseppe; Lonardi, Sara; Silvestris, Nicola; Santini, Daniele; Milella, Michele; Caparello, Chiara; Musettini, Gianna; Pasquini, Giulia; Falcone, Alfredo; Brandi, Giovanni; Sperduti, Isabella; Vasile, Enrico

2015-12-23

After progression to a standard first-line platinum and gemcitabine combination (GP), there is no established second-line therapy for patients with advanced biliary tract cancers (aBTC). Indeed, literature data suggest limited activity of most second-line agents evaluated so far. We collected a large retrospective series of aBTC patients treated with second-line chemotherapy after progression to a first-line GP regimen at different Italian institutions. We then pooled the data with those reported in previous studies, which were identified with a Medline search and the on-line abstract datasets of major international oncology meetings. A total of 174 patients were included in the multicenter survey: response rate (RR) with second-line chemotherapy was low (3.4 %), with median PFS and OS of 3.0 months and 6.6 months, respectively. At multivariate analysis, preserved performance status, low CA19.9 levels and absence of distant metastases were favorable prognostic factors. Data from other five presented or published series were identified, for a total of 499 patients included in the pooled analysis. The results confirmed marginal activity of second-line chemotherapy (RR: 10.2 %), with limited efficacy in unselected patient populations (median PFS: 3.1 months; median OS: 6.3 months). The current analysis highlights the limited value of second-line chemotherapy after a first-line GP combination in aBTC. While waiting for effective biologic agents in this setting, ongoing randomized trials will identify the optimal second-line chemotherapy regimen and validate prognostic factors for individual patient management.

Online and Face-to-Face Language Learning: A Comparative Analysis of Oral Proficiency in Introductory Spanish

ERIC Educational Resources Information Center

Moneypenny, Dianne Burke; Aldrich, Rosalie S.

2016-01-01

The primary resistance to online foreign language teaching often involves questions of spoken mastery of second language. In order to address this concern, this research comparatively assesses undergraduate students' oral proficiency in online and face-to-face Spanish classes, while taking into account students' previous second language…

A Kramers-Moyal approach to the analysis of third-order noise with applications in option valuation.

PubMed

Popescu, Dan M; Lipan, Ovidiu

2015-01-01

We propose the use of the Kramers-Moyal expansion in the analysis of third-order noise. In particular, we show how the approach can be applied in the theoretical study of option valuation. Despite Pawula's theorem, which states that a truncated model may exhibit poor statistical properties, we show that for a third-order Kramers-Moyal truncation model of an option's and its underlier's price, important properties emerge: (i) the option price can be written in a closed analytical form that involves the Airy function, (ii) the price is a positive function for positive skewness in the distribution, (iii) for negative skewness, the price becomes negative only for price values that are close to zero. Moreover, using third-order noise in option valuation reveals additional properties: (iv) the inconsistencies between two popular option pricing approaches (using a "delta-hedged" portfolio and using an option replicating portfolio) that are otherwise equivalent up to the second moment, (v) the ability to develop a measure R of how accurately an option can be replicated by a mixture of the underlying stocks and cash, (vi) further limitations of second-order models revealed by introducing third-order noise.

A Kramers-Moyal Approach to the Analysis of Third-Order Noise with Applications in Option Valuation

PubMed Central

Popescu, Dan M.; Lipan, Ovidiu

2015-01-01

We propose the use of the Kramers-Moyal expansion in the analysis of third-order noise. In particular, we show how the approach can be applied in the theoretical study of option valuation. Despite Pawula’s theorem, which states that a truncated model may exhibit poor statistical properties, we show that for a third-order Kramers-Moyal truncation model of an option’s and its underlier’s price, important properties emerge: (i) the option price can be written in a closed analytical form that involves the Airy function, (ii) the price is a positive function for positive skewness in the distribution, (iii) for negative skewness, the price becomes negative only for price values that are close to zero. Moreover, using third-order noise in option valuation reveals additional properties: (iv) the inconsistencies between two popular option pricing approaches (using a “delta-hedged” portfolio and using an option replicating portfolio) that are otherwise equivalent up to the second moment, (v) the ability to develop a measure R of how accurately an option can be replicated by a mixture of the underlying stocks and cash, (vi) further limitations of second-order models revealed by introducing third-order noise. PMID:25625856

Experience with multiple control groups in a large population-based case-control study on genetic and environmental risk factors.

PubMed

Pomp, E R; Van Stralen, K J; Le Cessie, S; Vandenbroucke, J P; Rosendaal, F R; Doggen, C J M

2010-07-01

We discuss the analytic and practical considerations in a large case-control study that had two control groups; the first control group consisting of partners of patients and the second obtained by random digit dialling (RDD). As an example of the evaluation of a general lifestyle factor, we present body mass index (BMI). Both control groups had lower BMIs than the patients. The distribution in the partner controls was closer to that of the patients, likely due to similar lifestyles. A statistical approach was used to pool the results of both analyses, wherein partners were analyzed with a matched analysis, while RDDs were analyzed without matching. Even with a matched analysis, the odds ratio with partner controls remained closer to unity than with RDD controls, which is probably due to unmeasured confounders in the comparison with the random controls as well as intermediary factors. However, when studying injuries as a risk factor, the odds ratio remained higher with partner control subjects than with RRD control subjects, even after taking the matching into account. Finally we used factor V Leiden as an example of a genetic risk factor. The frequencies of factor V Leiden were identical in both control groups, indicating that for the analyses of this genetic risk factor the two control groups could be combined in a single unmatched analysis. In conclusion, the effect measures with the two control groups were in the same direction, and of the same order of magnitude. Moreover, it was not always the same control group that produced the higher or lower estimates, and a matched analysis did not remedy the differences. Our experience with the intricacies of dealing with two control groups may be useful to others when thinking about an optimal research design or the best statistical approach.

Some Advanced Concepts in Discrete Aerodynamic Sensitivity Analysis

NASA Technical Reports Server (NTRS)

Taylor, Arthur C., III; Green, Lawrence L.; Newman, Perry A.; Putko, Michele M.

2001-01-01

An efficient incremental-iterative approach for differentiating advanced flow codes is successfully demonstrated on a 2D inviscid model problem. The method employs the reverse-mode capability of the automatic- differentiation software tool ADIFOR 3.0, and is proven to yield accurate first-order aerodynamic sensitivity derivatives. A substantial reduction in CPU time and computer memory is demonstrated in comparison with results from a straight-forward, black-box reverse- mode application of ADIFOR 3.0 to the same flow code. An ADIFOR-assisted procedure for accurate second-order aerodynamic sensitivity derivatives is successfully verified on an inviscid transonic lifting airfoil example problem. The method requires that first-order derivatives are calculated first using both the forward (direct) and reverse (adjoint) procedures; then, a very efficient non-iterative calculation of all second-order derivatives can be accomplished. Accurate second derivatives (i.e., the complete Hessian matrices) of lift, wave-drag, and pitching-moment coefficients are calculated with respect to geometric- shape, angle-of-attack, and freestream Mach number

A-posteriori error estimation for second order mechanical systems

NASA Astrophysics Data System (ADS)

Ruiner, Thomas; Fehr, Jörg; Haasdonk, Bernard; Eberhard, Peter

2012-06-01

One important issue for the simulation of flexible multibody systems is the reduction of the flexible bodies degrees of freedom. As far as safety questions are concerned knowledge about the error introduced by the reduction of the flexible degrees of freedom is helpful and very important. In this work, an a-posteriori error estimator for linear first order systems is extended for error estimation of mechanical second order systems. Due to the special second order structure of mechanical systems, an improvement of the a-posteriori error estimator is achieved. A major advantage of the a-posteriori error estimator is that the estimator is independent of the used reduction technique. Therefore, it can be used for moment-matching based, Gramian matrices based or modal based model reduction techniques. The capability of the proposed technique is demonstrated by the a-posteriori error estimation of a mechanical system, and a sensitivity analysis of the parameters involved in the error estimation process is conducted.

Exploring the Latent Structure of the Luria Model for the KABC-II at School Age: Further Insights from Confirmatory Factor Analysis

ERIC Educational Resources Information Center

McGill, Ryan J.

2017-01-01

The present study examined the factor structure of the Luria interpretive model for the Kaufman Assessment Battery for Children-Second Edition (KABC-II) with normative sample participants aged 7-18 (N = 2,025) using confirmatory factor analysis with maximum-likelihood estimation. For the eight subtest Luria configuration, an alternative…

Comprehensive manual handling limits for lowering, pushing, pulling and carrying activities.

PubMed

Shoaf, C; Genaidy, A; Karwowski, W; Waters, T; Christensen, D

1997-11-01

The objective of this study was to develop a set of mathematical models for manual lowering, pushing, pulling and carrying activities that would result in establishing load capacity limits to protect the lower back against occupational low-back disorders. In order to establish safe guidelines, a three-stage process was used. First, psychophysical data was used to generate the models' discounting factors and recommended load capacities. Second, biomechanical analysis was used to refine the recommended load capacities. Third, physiological criteria were used to validate the models' discounting factors. Both task and personal factors were considered in the models' development. When compared to the results from prior psychophysical research for these activities, the developed load capacity values are lower than previously established limits. The results of this study allowed the authors to validate the hypothesis proposed and tested by Karwowski (1983) that states that the combination of physiological and biomechanical stresses should lead to the overall measure of task acceptability or the psychophysical stress. This study also found that some of the discounting factors for the task frequency parameters recommended in the prior psychophysical research should not be used as several of the high frequency factors violated physiological limits.

Beam wander and M2-factor of partially coherent electromagnetic hollow Gaussian beam propagating through non-Kolmogorov turbulence

NASA Astrophysics Data System (ADS)

Xu, Yonggen; Tian, Huanhuan; Dan, Youquan; Feng, Hao; Wang, Shijian

2017-04-01

Propagation formulae for M2-factor and beam wander of partially coherent electromagnetic hollow Gaussian (PCEHG) beam in non-Kolmogorov turbulence are derived based on the extended Huygens-Fresnel principle and the second-order moments of the Wigner distribution function. Our results indicate that the normalized M2-factors of PCEHG beam with larger beam order, waist width, inner scale of turbulence, the generalized exponent parameter, and smaller transverse coherent widths, outer scale of turbulence, the generalized structure parameter are less affected by the turbulence. The root mean square beam wander and relative beam wander are more obvious for PCEHG beam with smaller beam order, larger inner and outer scales of turbulence, exponent parameter, transverse coherent widths, and the generalized structure parameter. What is more, the beam wander properties of PCEHG beam in non-Kolmogorov turbulence are very different from M2-factor and spreading properties of beam in turbulence.

Fully decoupled monolithic projection method for natural convection problems

NASA Astrophysics Data System (ADS)

Pan, Xiaomin; Kim, Kyoungyoun; Lee, Changhoon; Choi, Jung-Il

2017-04-01

To solve time-dependent natural convection problems, we propose a fully decoupled monolithic projection method. The proposed method applies the Crank-Nicolson scheme in time and the second-order central finite difference in space. To obtain a non-iterative monolithic method from the fully discretized nonlinear system, we first adopt linearizations of the nonlinear convection terms and the general buoyancy term with incurring second-order errors in time. Approximate block lower-upper decompositions, along with an approximate factorization technique, are additionally employed to a global linearly coupled system, which leads to several decoupled subsystems, i.e., a fully decoupled monolithic procedure. We establish global error estimates to verify the second-order temporal accuracy of the proposed method for velocity, pressure, and temperature in terms of a discrete l2-norm. Moreover, according to the energy evolution, the proposed method is proved to be stable if the time step is less than or equal to a constant. In addition, we provide numerical simulations of two-dimensional Rayleigh-Bénard convection and periodic forced flow. The results demonstrate that the proposed method significantly mitigates the time step limitation, reduces the computational cost because only one Poisson equation is required to be solved, and preserves the second-order temporal accuracy for velocity, pressure, and temperature. Finally, the proposed method reasonably predicts a three-dimensional Rayleigh-Bénard convection for different Rayleigh numbers.

Niche analysis and conservation of the orchids of east Macedonia (NE Greece)

NASA Astrophysics Data System (ADS)

Tsiftsis, Spyros; Tsiripidis, Ioannis; Karagiannakidou, Vassiliki; Alifragis, Dimitrios

2008-01-01

The orchid family is one of the largest in the flowering plant kingdom and includes a lot of rare, threatened or endangered species. The determination of plant species niche is considered fundamental for their conservation. Two parameters closely related with species niche are niche marginality and breadth. The first parameter is a measure of how typical or atypical a species niche is within an area, while the second is a measure of species tolerance. This study deals with niche analysis of the orchids of east Macedonia (NE Greece). Factors that are known to determine species distribution on a regional scale, such as altitude, aspect, habitat type, bedrock type and soil properties (acidity, organic matter, and phosphorus content) were used as explanatory variables. Geographical coordinates were also employed in order to explore spatial patterns in orchid distribution. Niche analysis was carried out using the Outlying Mean Index (OMI) analysis. Out of the total data of 55 taxa that were analyzed, 41 had a significant marginal niche compared with the average niche of the study area. Altitude, soil acidity and certain habitat types were found to be the most important factors in determining orchid distribution. Five different species groups were distinguished on the basis of their ecological preferences and niche breadth. Species niche marginality and breadth, the amplitude of their geographical distribution, the size of their populations and the rareness and conservation status of their habitats were taken into account in order to set conservation priorities for the orchids in the study area. The above characteristics combined with intuitive criteria (e.g. geographical distribution, endemicity) for the species with a small number of occurrences could form a sound basis for setting conservation priorities.

Unconditionally stable, second-order accurate schemes for solid state phase transformations driven by mechano-chemical spinodal decomposition

DOE PAGES

Sagiyama, Koki; Rudraraju, Shiva; Garikipati, Krishna

2016-09-13

Here, we consider solid state phase transformations that are caused by free energy densities with domains of non-convexity in strain-composition space; we refer to the non-convex domains as mechano-chemical spinodals. The non-convexity with respect to composition and strain causes segregation into phases with different crystal structures. We work on an existing model that couples the classical Cahn-Hilliard model with Toupin’s theory of gradient elasticity at finite strains. Both systems are represented by fourth-order, nonlinear, partial differential equations. The goal of this work is to develop unconditionally stable, second-order accurate time-integration schemes, motivated by the need to carry out large scalemore » computations of dynamically evolving microstructures in three dimensions. We also introduce reduced formulations naturally derived from these proposed schemes for faster computations that are still second-order accurate. Although our method is developed and analyzed here for a specific class of mechano-chemical problems, one can readily apply the same method to develop unconditionally stable, second-order accurate schemes for any problems for which free energy density functions are multivariate polynomials of solution components and component gradients. Apart from an analysis and construction of methods, we present a suite of numerical results that demonstrate the schemes in action.« less

Factor Analysis for Clustered Observations.

ERIC Educational Resources Information Center

Longford, N. T.; Muthen, B. O.

1992-01-01

A two-level model for factor analysis is defined, and formulas for a scoring algorithm for this model are derived. A simple noniterative method based on decomposition of total sums of the squares and cross-products is discussed and illustrated with simulated data and data from the Second International Mathematics Study. (SLD)

Exploratory and Higher-Order Factor Analyses of the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV) Adolescent Subsample

ERIC Educational Resources Information Center

Canivez, Gary L.; Watkins, Marley W.

2010-01-01

The factor structure of the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV; Wechsler, 2008a) with the adolescent participants (ages 16-19 years; N = 400) in the standardization sample was assessed using exploratory factor analysis, multiple factor extraction criteria, and higher-order exploratory factor analyses. Results from…

Validation of a Korean MMPI-2 Hwa-Byung scale using a Korean normative sample.

PubMed

Ketterer, Holly; Han, Kyunghee; Weed, Nathan C

2010-07-01

The psychometric properties of a recently developed measure of Hwa-Byung (HB), a Korean culture bound syndrome, using an updated version of the Korean Minnesota Multiphasic Personality Inventory-2, were examined in Korean normative sample. Confirmatory factor analyses indicated that both the first-order four-factor model and the single second-order factor model fit the data well, but the latter may be superior because of its parsimony. The HB scale correlated modestly with age, sex, SES, and problems with family and finance. However, it showed substantial correlations with spouse ratings items that were identified a priori as prospective HB correlates, indicating excellent concurrent validity. The limitations of the study and the need for future studies employing HB patients were discussed.

CMB in the river frame and gauge invariance at second order

NASA Astrophysics Data System (ADS)

Roldan, Omar

2018-03-01

Gauge invariance: the Sachs-Wolfe formula describing the Cosmic Microwave Background (CMB) temperature anisotropies is one of the most important relations in cosmology. Despite its importance, the gauge invariance of this formula has only been discussed at first order. Here we discuss the subtle issue of second-order gauge transformations on the CMB. By introducing two rules (needed to handle the subtle issues), we prove the gauge invariance of the second-order Sachs-Wolfe formula and provide several compact expressions which can be useful for the study of gauge transformations on cosmology. Our results go beyond a simple technicality: we discuss from a physical point of view several aspects that improve our understanding of the CMB. We also elucidate how crucial it is to understand gauge transformations on the CMB in order to avoid errors and/or misconceptions as occurred in the past. The river frame: we introduce a cosmological frame which we call the river frame. In this frame, photons and any object can be thought as fishes swimming in the river and relations are easily expressed in either the metric or the covariant formalism then ensuring a transparent geometric meaning. Finally, our results show that the river frame is useful to make perturbative and non-perturbative analysis. In particular, it was already used to obtain the fully nonlinear generalization of the Sachs-Wolfe formula and is used here to describe second-order perturbations.

ACCURATE SOLUTION AND GRADIENT COMPUTATION FOR ELLIPTIC INTERFACE PROBLEMS WITH VARIABLE COEFFICIENTS

PubMed Central

LI, ZHILIN; JI, HAIFENG; CHEN, XIAOHONG

2016-01-01

A new augmented method is proposed for elliptic interface problems with a piecewise variable coefficient that has a finite jump across a smooth interface. The main motivation is not only to get a second order accurate solution but also a second order accurate gradient from each side of the interface. The key of the new method is to introduce the jump in the normal derivative of the solution as an augmented variable and re-write the interface problem as a new PDE that consists of a leading Laplacian operator plus lower order derivative terms near the interface. In this way, the leading second order derivatives jump relations are independent of the jump in the coefficient that appears only in the lower order terms after the scaling. An upwind type discretization is used for the finite difference discretization at the irregular grid points near or on the interface so that the resulting coefficient matrix is an M-matrix. A multi-grid solver is used to solve the linear system of equations and the GMRES iterative method is used to solve the augmented variable. Second order convergence for the solution and the gradient from each side of the interface has also been proved in this paper. Numerical examples for general elliptic interface problems have confirmed the theoretical analysis and efficiency of the new method. PMID:28983130

Third-Order Memristive Morris-Lecar Model of Barnacle Muscle Fiber

NASA Astrophysics Data System (ADS)

Rajamani, Vetriveeran; Sah, Maheshwar Pd.; Mannan, Zubaer Ibna; Kim, Hyongsuk; Chua, Leon

This paper presents a detailed analysis of various oscillatory behaviors observed in relation to the calcium and potassium ions in the third-order Morris-Lecar model of giant barnacle muscle fiber. Since, both the calcium and potassium ions exhibit all of the characteristics of memristor fingerprints, we claim that the time-varying calcium and potassium ions in the third-order Morris-Lecar model are actually time-invariant calcium and potassium memristors in the third-order memristive Morris-Lecar model. We confirmed the existence of a small unstable limit cycle oscillation in both the second-order and the third-order Morris-Lecar model by numerically calculating the basin of attraction of the asymptotically stable equilibrium point associated with two subcritical Hopf bifurcation points. We also describe a comprehensive analysis of the generation of oscillations in third-order memristive Morris-Lecar model via small-signal circuit analysis and a subcritical Hopf bifurcation phenomenon.

The association between bodily anxiety symptom dimensions and the scales of the Revised NEO Personality Inventory and the Temperament and Character Inventory.

PubMed

Kristensen, Ann Suhl; Mortensen, Erik Lykke; Mors, Ole

2009-01-01

The association between anxiety disorders and different measures of personality has been extensively studied to further the understanding of etiology, course, and treatment, and to possibly prevent the development of anxiety disorders. We have proposed a hierarchical model of bodily anxiety symptoms with 1 second-order severity factor and 5 first-order factors: cardio-respiratory, gastro-intestinal, autonomic, vertigo, and tension. The aim of this study was to investigate whether personality traits were differentially related to distinct symptom subdimensions or exclusively related to the general severity factor. Structural equation modeling of data on 120 patients with a primary diagnosis of social phobia and 207 patients with a primary diagnosis of panic disorder was used to examine the association between anxiety symptom dimensions and the scales of the Temperament and Character Inventory and of the Revised NEO Personality Inventory. When both sets of personality measures were simultaneously modeled as predictors, the Revised NEO Personality Inventory scales, neuroticism and extraversion, remained significantly associated with the severity factor, whereas the association between the Temperament and Character Inventory dimensions, harm avoidance and novelty seeking, and the severity factor became nonsignificant. Harm avoidance was negatively associated with the vertigo first-order factor, whereas neuroticism was negatively associated with the cardio-respiratory first-order factor, indicating that personality factors may be differentially related to specific anxiety subdimensions.

IGFBP-1: a metabolic signal associated with exercise-induced amenorrhoea.

PubMed

Jenkins, P J; Ibanez-Santos, X; Holly, J; Cotterill, A; Perry, L; Wolman, R; Harries, M; Grossman, A

1993-04-01

Severe exercise in young females is a potent cause of menstrual irregularity, although the exact pathogenesis is currently unknown. We performed a cross-sectional endocrine and metabolic analysis of a group of elite athletes and dancers in order to establish which variable, if any, was specifically associated with changes in menstruation. By using a step-wise discriminant analysis, two independent predictors, elevated serum cortisol and insulin-like growth factor binding protein 1 (IGFBP-1) levels, were found to account for the majority (67%) of the variance. IGFBP-1 is a hepatic protein which is acutely and inversely regulated by insulin, and is thought to modulate the peripheral actions of IGF-1. While the change in serum cortisol may reflect activation of central stress pathways, these findings suggest for the first time that there is a second peripheral signal, IGFBP-1, which may relate the availability of metabolic fuels to the control of reproduction.

Time from Prior Chemotherapy Enhances Prognostic Risk Grouping in the Second-line Setting of Advanced Urothelial Carcinoma: A Retrospective Analysis of Pooled, Prospective Phase 2 Trials

PubMed Central

Sonpavde, Guru; Pond, Gregory R.; Fougeray, Ronan; Choueiri, Toni K.; Qu, Angela Q.; Vaughn, David J.; Niegisch, Guenter; Albers, Peter; James, Nicholas D.; Wong, Yu-Ning; Ko, Yoo-Joung; Sridhar, Srikala S.; Galsky, Matthew D.; Petrylak, Daniel P.; Vaishampayan, Ulka N.; Khan, Awais; Vogelzang, Nicholas J.; Beer, Tomasz M.; Stadler, Walter M.; O’Donnell, Peter H.; Sternberg, Cora N.; Rosenberg, Jonathan E.; Bellmunt, Joaquim

2014-01-01

Background Outcomes for patients in the second-line setting of advanced urothelial carcinoma (UC) are dismal. The recognized prognostic factors in this context are Eastern Cooperative Oncology Group (ECOG) performance status (PS) >0, hemoglobin level (Hb) <10 g/dl, and liver metastasis (LM). Objectives The purpose of this retrospective study of prospective trials was to investigate the prognostic value of time from prior chemotherapy (TFPC) independent of known prognostic factors. Design, setting, and participants: Data from patients from seven prospective trials with available baseline TFPC, Hb, PS, and LM values were used for retrospective analysis (n = 570). External validation was conducted in a second-line phase 3 trial comparing best supportive care (BSC) versus vinflunine plus BSC (n = 352). Outcome measurements and statistical analysis Cox proportional hazards regression was used to evaluate the association of factors, with overall survival (OS) and progression-free survival (PFS) being the respective primary and secondary outcome measures. Results and limitations ECOG-PS >0, LM, Hb <10 g/dl, and shorter TFPC were significant prognostic factors for OS and PFS on multivariable analysis. Patients with zero, one, two, and three to four factors demonstrated median OS of 12.2, 6.7, 5.1, and 3.0 mo, respectively (concordance statistic = 0.638). Setting of prior chemotherapy (metastatic disease vs perioperative) and prior platinum agent (cisplatin or carboplatin) were not prognostic factors. External validation demonstrated a significant association of TFPC with PFS on univariable and most multivariable analyses, and with OS on univariable analyses. Limitations of retrospective analyses are applicable. Conclusions Shorter TFPC enhances prognostic classification independent of ECOG-PS>0, Hb<10 g/ dl, and LM in the setting of second-line therapy for advanced UC. These data may facilitate drug development and interpretation of trials. PMID:23206856

A Wind Tunnel Study on the Mars Pathfinder (MPF) Lander Descent Pressure Sensor

NASA Technical Reports Server (NTRS)

Soriano, J. Francisco; Coquilla, Rachael V.; Wilson, Gregory R.; Seiff, Alvin; Rivell, Tomas

2001-01-01

The primary focus of this study was to determine the accuracy of the Mars Pathfinder lander local pressure readings in accordance with the actual ambient atmospheric pressures of Mars during parachute descent. In order to obtain good measurements, the plane of the lander pressure sensor opening should ideally be situated so that it is parallel to the freestream. However, due to two unfavorable conditions, the sensor was positioned in locations where correction factors are required. One of these disadvantages is due to the fact that the parachute attachment point rotated the lander's center of gravity forcing the location of the pressure sensor opening to be off tangent to the freestream. The second and most troublesome factor was that the lander descends with slight oscillations that could vary the amplitude of the sensor readings. In order to accurately map the correction factors required at each sensor position, an experiment simulating the lander descent was conducted in the Martian Surface Wind Tunnel at NASA Ames Research Center. Using a 115 scale model at Earth ambient pressures, the test settings provided the necessary Reynolds number conditions in which the actual lander was possibly subjected to during the descent. In the analysis and results of this experiment, the readings from the lander sensor were converted to the form of pressure coefficients. With a contour map of pressure coefficients at each lander oscillatory position, this report will provide a guideline to determine the correction factors required for the Mars Pathfinder lander descent pressure sensor readings.

Nonlinear dynamic analysis of voices before and after surgical excision of vocal polyps

NASA Astrophysics Data System (ADS)

Zhang, Yu; McGilligan, Clancy; Zhou, Liang; Vig, Mark; Jiang, Jack J.

2004-05-01

Phase space reconstruction, correlation dimension, and second-order entropy, methods from nonlinear dynamics, are used to analyze sustained vowels generated by patients before and after surgical excision of vocal polyps. Two conventional acoustic perturbation parameters, jitter and shimmer, are also employed to analyze voices before and after surgery. Presurgical and postsurgical analyses of jitter, shimmer, correlation dimension, and second-order entropy are statistically compared. Correlation dimension and second-order entropy show a statistically significant decrease after surgery, indicating reduced complexity and higher predictability of postsurgical voice dynamics. There is not a significant postsurgical difference in shimmer, although jitter shows a significant postsurgical decrease. The results suggest that jitter and shimmer should be applied to analyze disordered voices with caution; however, nonlinear dynamic methods may be useful for analyzing abnormal vocal function and quantitatively evaluating the effects of surgical excision of vocal polyps.

Quasi-phases and pseudo-transitions in one-dimensional models with nearest neighbor interactions

NASA Astrophysics Data System (ADS)

de Souza, S. M.; Rojas, Onofre

2018-01-01

There are some particular one-dimensional models, such as the Ising-Heisenberg spin models with a variety of chain structures, which exhibit unexpected behaviors quite similar to the first and second order phase transition, which could be confused naively with an authentic phase transition. Through the analysis of the first derivative of free energy, such as entropy, magnetization, and internal energy, a "sudden" jump that closely resembles a first-order phase transition at finite temperature occurs. However, by analyzing the second derivative of free energy, such as specific heat and magnetic susceptibility at finite temperature, it behaves quite similarly to a second-order phase transition exhibiting an astonishingly sharp and fine peak. The correlation length also confirms the evidence of this pseudo-transition temperature, where a sharp peak occurs at the pseudo-critical temperature. We also present the necessary conditions for the emergence of these quasi-phases and pseudo-transitions.

Tunable Majorana corner states in a two-dimensional second-order topological superconductor induced by magnetic fields

NASA Astrophysics Data System (ADS)

Zhu, Xiaoyu

2018-05-01

A two-dimensional second-order topological superconductor exhibits a finite gap in both bulk and edges, with the nontrivial topology manifesting itself through Majorana zero modes localized at the corners, i.e., Majorana corner states. We investigate a time-reversal-invariant topological superconductor in two dimensions and demonstrate that an in-plane magnetic field could transform it into a second-order topological superconductor. A detailed analysis reveals that the magnetic field gives rise to mass terms which take distinct values among the edges, and Majorana corner states naturally emerge at the intersection of two adjacent edges with opposite masses. With the rotation of the magnetic field, Majorana corner states localized around the boundary may hop from one corner to a neighboring one and eventually make a full circle around the system when the field rotates by 2 π . In the end, we briefly discuss physical realizations of this system.

A novel method for predicting the power outputs of wave energy converters

NASA Astrophysics Data System (ADS)

Wang, Yingguang

2018-03-01

This paper focuses on realistically predicting the power outputs of wave energy converters operating in shallow water nonlinear waves. A heaving two-body point absorber is utilized as a specific calculation example, and the generated power of the point absorber has been predicted by using a novel method (a nonlinear simulation method) that incorporates a second order random wave model into a nonlinear dynamic filter. It is demonstrated that the second order random wave model in this article can be utilized to generate irregular waves with realistic crest-trough asymmetries, and consequently, more accurate generated power can be predicted by subsequently solving the nonlinear dynamic filter equation with the nonlinearly simulated second order waves as inputs. The research findings demonstrate that the novel nonlinear simulation method in this article can be utilized as a robust tool for ocean engineers in their design, analysis and optimization of wave energy converters.

Re-evaluation of an Optimized Second Order Backward Difference (BDF2OPT) Scheme for Unsteady Flow Applications

NASA Technical Reports Server (NTRS)

Vatsa, Veer N.; Carpenter, Mark H.; Lockard, David P.

2009-01-01

Recent experience in the application of an optimized, second-order, backward-difference (BDF2OPT) temporal scheme is reported. The primary focus of the work is on obtaining accurate solutions of the unsteady Reynolds-averaged Navier-Stokes equations over long periods of time for aerodynamic problems of interest. The baseline flow solver under consideration uses a particular BDF2OPT temporal scheme with a dual-time-stepping algorithm for advancing the flow solutions in time. Numerical difficulties are encountered with this scheme when the flow code is run for a large number of time steps, a behavior not seen with the standard second-order, backward-difference, temporal scheme. Based on a stability analysis, slight modifications to the BDF2OPT scheme are suggested. The performance and accuracy of this modified scheme is assessed by comparing the computational results with other numerical schemes and experimental data.

Oxidative Recession, Sulfur Release, and Al203 Spallation for Y-Doped Alloys

NASA Technical Reports Server (NTRS)

Smialek, James L.

2001-01-01

Second-order spallation phenomena have been noted for Y-doped Rene'N5 after long term oxidation at 1150 degrees C. The reason for this behavior has not been conclusively identified. A mass equivalence analysis has shown that the surface recession resulting from oxidation has the potential of releasing about 0.15 monolayer of sulfur for every 1 mg/sq cm of oxygen reacted for an alloy containing 5 ppmw of sulfur. This amount is significant in comparison to levels that have been shown to result in first-order spallation behavior for undoped alloys. Oxidative recession is therefore speculated to be a contributing source of sulfur and second-order spallation for Y-doped alloys.

Second-order singular pertubative theory for gravitational lenses

NASA Astrophysics Data System (ADS)

Alard, C.

2018-03-01

The extension of the singular perturbative approach to the second order is presented in this paper. The general expansion to the second order is derived. The second-order expansion is considered as a small correction to the first-order expansion. Using this approach, it is demonstrated that in practice the second-order expansion is reducible to a first order expansion via a re-definition of the first-order pertubative fields. Even if in usual applications the second-order correction is small the reducibility of the second-order expansion to the first-order expansion indicates a potential degeneracy issue. In general, this degeneracy is hard to break. A useful and simple second-order approximation is the thin source approximation, which offers a direct estimation of the correction. The practical application of the corrections derived in this paper is illustrated by using an elliptical NFW lens model. The second-order pertubative expansion provides a noticeable improvement, even for the simplest case of thin source approximation. To conclude, it is clear that for accurate modelization of gravitational lenses using the perturbative method the second-order perturbative expansion should be considered. In particular, an evaluation of the degeneracy due to the second-order term should be performed, for which the thin source approximation is particularly useful.

Genetical Analysis of Chromosomal Interaction Effects on the Activities of the Glucose 6-Phosphate and 6-Phosphogluconate Dehydrogenases in DROSOPHILA MELANOGASTER

PubMed Central

Miyashita, Naohiko; Laurie-Ahlberg, C. C.

1984-01-01

By combining ten second and ten third chromosomes, we investigated chromosomal interaction with respect to the action of the modifier factors on G6PD and 6PGD activities in Drosophila melanogaster. Analysis of variance revealed that highly significant chromosomal interaction exists for both enzyme activities. From the estimated variance components, it was concluded that the variation in enzyme activity attributed to the interaction is as great as the variation attributed to the second chromosome but less than attributed to the third chromosome. The interaction is not explained by the variation of body size (live weight). The interaction is generated from both the lack of correlation of second chromosomes for third chromosome backgrounds and the heterogeneous variance of second chromosomes for different third chromosome backgrounds. Large and constant correlation between G6PD and 6PGD activities were found for third chromosomes with any second chromosome background, whereas the correlations for second chromosomes were much smaller and varied considerably with the third chromosome background. This result suggests that the activity modifiers on the second chromosome are under the influence of third chromosome factors. PMID:6425115

Orthogonal higher order structure and confirmatory factor analysis of the French Wechsler Adult Intelligence Scale (WAIS-III).

PubMed

Golay, Philippe; Lecerf, Thierry

2011-03-01

According to the most widely accepted Cattell-Horn-Carroll (CHC) model of intelligence measurement, each subtest score of the Wechsler Intelligence Scale for Adults (3rd ed.; WAIS-III) should reflect both 1st- and 2nd-order factors (i.e., 4 or 5 broad abilities and 1 general factor). To disentangle the contribution of each factor, we applied a Schmid-Leiman orthogonalization transformation (SLT) to the standardization data published in the French technical manual for the WAIS-III. Results showed that the general factor accounted for 63% of the common variance and that the specific contributions of the 1st-order factors were weak (4.7%-15.9%). We also addressed this issue by using confirmatory factor analysis. Results indicated that the bifactor model (with 1st-order group and general factors) better fit the data than did the traditional higher order structure. Models based on the CHC framework were also tested. Results indicated that a higher order CHC model showed a better fit than did the classical 4-factor model; however, the WAIS bifactor structure was the most adequate. We recommend that users do not discount the Full Scale IQ when interpreting the index scores of the WAIS-III because the general factor accounts for the bulk of the common variance in the French WAIS-III. The 4 index scores cannot be considered to reflect only broad ability because they include a strong contribution of the general factor.

Dimensional analysis yields the general second-order differential equation underlying many natural phenomena: the mathematical properties of a phenomenon's data plot then specify a unique differential equation for it.

PubMed

Kepner, Gordon R

2014-08-27

This study uses dimensional analysis to derive the general second-order differential equation that underlies numerous physical and natural phenomena described by common mathematical functions. It eschews assumptions about empirical constants and mechanisms. It relies only on the data plot's mathematical properties to provide the conditions and constraints needed to specify a second-order differential equation that is free of empirical constants for each phenomenon. A practical example of each function is analyzed using the general form of the underlying differential equation and the observable unique mathematical properties of each data plot, including boundary conditions. This yields a differential equation that describes the relationship among the physical variables governing the phenomenon's behavior. Complex phenomena such as the Standard Normal Distribution, the Logistic Growth Function, and Hill Ligand binding, which are characterized by data plots of distinctly different sigmoidal character, are readily analyzed by this approach. It provides an alternative, simple, unifying basis for analyzing each of these varied phenomena from a common perspective that ties them together and offers new insights into the appropriate empirical constants for describing each phenomenon.

An analysis of optical effects caused by thermally induced mirror deformations.

PubMed

Ogrodnik, R F

1970-09-01

This paper analyzes thermally induced mirror deformations and their resulting wavefront distortions which occur under the conditions of radially nonuniform mirror heating. The analysis is adaptable to heating produced by any radially nonuniform incident radiation. Specific examples of radiation distributions which are considered are the cosine squared and the gaussian and TEM(0, 1) laser distributions. Deformation effects are examined from two aspects, the first of which is the reflected wavefront radial phase distortion profile caused by the thermally induced surface irregularities at the mirror face. These phase distortion effects appear as aberrations in noncoherent optical applications and as the loss of spatial coherence in coherent applications. The second aspect is the gross wavefront bending due to mirror curvature effects. The analysis considers substrate material, geometry, and cooling in order to determine potential deformation controlling factors. Substrate materials are compared, and performance indicators are suggested to aid in selecting an optimum material for a given heating condition. Deformation examples are given for materials of interest and specific absorbed power levels.

ACCESS 3. Approximation concepts code for efficient structural synthesis: User's guide

NASA Technical Reports Server (NTRS)

Fleury, C.; Schmit, L. A., Jr.

1980-01-01

A user's guide is presented for ACCESS-3, a research oriented program which combines dual methods and a collection of approximation concepts to achieve excellent efficiency in structural synthesis. The finite element method is used for structural analysis and dual algorithms of mathematical programming are applied in the design optimization procedure. This program retains all of the ACCESS-2 capabilities and the data preparation formats are fully compatible. Four distinct optimizer options were added: interior point penalty function method (NEWSUMT); second order primal projection method (PRIMAL2); second order Newton-type dual method (DUAL2); and first order gradient projection-type dual method (DUAL1). A pure discrete and mixed continuous-discrete design variable capability, and zero order approximation of the stress constraints are also included.

The Emergence of a Temporally Extended Self and Factors that Contribute to Its Development: From Theoretical and Empirical Perspectives

ERIC Educational Resources Information Center

Lazaridis, Mary

2013-01-01

The main aims of the current research were to determine when children develop a temporally extended self (TES) and what factors contribute to its development. However, in order to address these aims it was important to, first, assess whether the test of delayed self-recognition (DSR) is a valid measure for the development of the TES, and, second,…

Water adsorption isotherms on porous onionlike carbonaceous particles. Simulations with the grand canonical Monte Carlo method

NASA Astrophysics Data System (ADS)

Hantal, György; Picaud, Sylvain; Hoang, Paul N. M.; Voloshin, Vladimir P.; Medvedev, Nikolai N.; Jedlovszky, Pál

2010-10-01

The grand canonical Monte Carlo method is used to simulate the adsorption isotherms of water molecules on different types of model soot particles. These soot models are constructed by first removing atoms from onion-fullerene structures in order to create randomly distributed pores inside the soot, and then performing molecular dynamics simulations, based on the reactive adaptive intermolecular reactive empirical bond order (AIREBO) description of the interaction between carbon atoms, to optimize the resulting structures. The obtained results clearly show that the main driving force of water adsorption on soot is the possibility of the formation of new water-water hydrogen bonds with the already adsorbed water molecules. The shape of the calculated water adsorption isotherms at 298 K strongly depends on the possible confinement of the water molecules in pores of the carbonaceous structure. We found that there are two important factors influencing the adsorption ability of soot. The first of these factors, dominating at low pressures, is the ability of the soot of accommodating the first adsorbed water molecules at strongly hydrophilic sites. The second factor concerns the size and shape of the pores, which should be such that the hydrogen bonding network of the water molecules filling them should be optimal. This second factor determines the adsorption properties at higher pressures.

Proposal of a service delivery integration index of home care for older persons: application in several European cities

PubMed Central

Henrard, Jean-Claude; Ankri, Joël; Frijters, Dinnus; Carpenter, Iain; Topinkova, Eva; Garms-Homolova, Vjenka; Finne-Soveri, Harriett; Sørbye, Liv Wergeland; Jónsson, Palmi V.; Ljunggren, Gunnar; Schroll, Marianne; Wagner, Cordula; Bernabei, Roberto

2006-01-01

Abstract Purpose To propose an integration index of home care delivery to older persons, to study its validity and to apply it to home care services of European cities. Theory Home care delivery integration was based on two dimensions referring to process-centred integration and organisational structure approach. Method Items considered as part of both dimensions according to an expert consensus (face validity) were extracted from a standardised questionnaire used in “Aged in Home care” (AdHoc) study to capture basic characteristics of home care services. Their summation leads to a services' delivery integration index. This index was applied to AdHoc services. A factor analysis was computed in order to empirically test the validity of the theoretical constructs. The plot of the settings was performed. Results Application of the index ranks home care services in four groups according to their score. Factor analysis identifies a first factor which opposes working arrangement within service to organisational structure bringing together provisions for social care. A second factor corresponds to basic nursing care and therapies. Internal consistency for those three domains ranges from 0.78 to 0.93. When plotting the different settings different models of service delivery appear. Conclusion The proposed index shows that behind a total score several models of care delivery are hidden. Comparison of service delivery integration should take into account this heterogeneity. PMID:17006549

The Affective and Emotional Composite Temperament (AFECT) model and scale: a system-based integrative approach.

PubMed

Lara, Diogo R; Bisol, Luisa W; Brunstein, Miriam G; Reppold, Caroline T; de Carvalho, Hudson W; Ottoni, Gustavo L

2012-09-01

Based on many temperament frameworks, here we propose an integration of emotional and affective temperaments (the AFECT model), forming a common substrate for mood, behavior, personality and part of cognition. Temperament is conceived as a self-regulated system with six emotional dimensions: volition, anger, inhibition, sensitivity, coping and control. The different combinations of these emotional dimensions result in 12 affective temperament types, namely depressive, anxious, apathetic, obsessive, cyclothymic, dysphoric, irritable, volatile, disinhibited, hyperthymic and euphoric. We also developed and validated a self-report scale to evaluate this construct, the Affective and Emotional Composite Temperament Scale (AFECTS). Exploratory and confirmatory psychometric analyses were performed with the internet version of the AFECTS in 2947 subjects (72% females, 35±11years old). The factors interpreted as volition, anger, inhibition, sensitivity, coping and control showed very good Cronbach's alphas for 5 dimensions (0.87-0.90) and acceptable alpha for inhibition (0.75). Confirmatory factor analysis corroborated this 6-factor structure when considering inhibition as a second-order factor with fear and caution as first-order factors (SRMR=0.061; RMSEA=0.053). In the Affective section, all 12 categorical affective temperaments were selected in the categorical choice, with 99% of volunteers identifying at least one adequate description of their affective temperament. Only the internet version was used in a general population sample. The AFECT model provides an integrated framework of temperament as a self-regulated system, with implications for mental health, psychiatric disorders and their treatment. The AFECTS showed good psychometric properties to further study this model. Copyright © 2011 Elsevier B.V. All rights reserved.

The cross-national structure of mental disorders: results from the World Mental Health Surveys.

PubMed

de Jonge, Peter; Wardenaar, Klaas J; Lim, Carmen C W; Aguilar-Gaxiola, Sergio; Alonso, Jordi; Andrade, Laura Helena; Bunting, Brendan; Chatterji, Somnath; Ciutan, Marius; Gureje, Oye; Karam, Elie G; Lee, Sing; Medina-Mora, Maria Elena; Moskalewicz, Jacek; Navarro-Mateu, Fernando; Pennell, Beth-Ellen; Piazza, Marina; Posada-Villa, José; Torres, Yolanda; Kessler, Ronald C; Scott, Kate

2017-12-19

The patterns of comorbidity among mental disorders have led researchers to model the underlying structure of psychopathology. While studies have suggested a structure including internalizing and externalizing disorders, less is known with regard to the cross-national stability of this model. Moreover, little data are available on the placement of eating disorders, bipolar disorder and psychotic experiences (PEs) in this structure. We evaluated the structure of mental disorders with data from the World Health Organization Composite International Diagnostic Interview, including 15 lifetime mental disorders and six PEs. Respondents (n = 5478-15 499) were included from 10 high-, middle- and lower middle-income countries across the world aged 18 years or older. Confirmatory factor analyses (CFAs) were used to evaluate and compare the fit of different factor structures to the lifetime disorder data. Measurement invariance was evaluated with multigroup CFA (MG-CFA). A second-order model with internalizing and externalizing factors and fear and distress subfactors best described the structure of common mental disorders. MG-CFA showed that this model was stable across countries. Of the uncommon disorders, bipolar disorder and eating disorder were best grouped with the internalizing factor, and PEs with a separate factor. These results indicate that cross-national patterns of lifetime common mental-disorder comorbidity can be explained with a second-order underlying structure that is stable across countries and can be extended to also cover less common mental disorders.

Binocular Combination of Second-Order Stimuli

PubMed Central

Zhou, Jiawei; Liu, Rong; Zhou, Yifeng; Hess, Robert F.

2014-01-01

Phase information is a fundamental aspect of visual stimuli. However, the nature of the binocular combination of stimuli defined by modulations in contrast, so-called second-order stimuli, is presently not clear. To address this issue, we measured binocular combination for first- (luminance modulated) and second-order (contrast modulated) stimuli using a binocular phase combination paradigm in seven normal adults. We found that the binocular perceived phase of second-order gratings depends on the interocular signal ratio as has been previously shown for their first order counterparts; the interocular signal ratios when the two eyes were balanced was close to 1 in both first- and second-order phase combinations. However, second-order combination is more linear than previously found for first-order combination. Furthermore, binocular combination of second-order stimuli was similar regardless of whether the carriers in the two eyes were correlated, anti-correlated, or uncorrelated. This suggests that, in normal adults, the binocular phase combination of second-order stimuli occurs after the monocular extracting of the second-order modulations. The sensory balance associated with this second-order combination can be obtained from binocular phase combination measurements. PMID:24404180

Toroidal figures of equilibrium from a second-order accurate, accelerated SCF method with subgrid approach

NASA Astrophysics Data System (ADS)

Huré, J.-M.; Hersant, F.

2017-02-01

We compute the structure of a self-gravitating torus with polytropic equation of state (EOS) rotating in an imposed centrifugal potential. The Poisson solver is based on isotropic multigrid with optimal covering factor (fluid section-to-grid area ratio). We work at second order in the grid resolution for both finite difference and quadrature schemes. For soft EOS (I.e. polytropic index n ≥ 1), the underlying second order is naturally recovered for boundary values and any other integrated quantity sensitive to the mass density (mass, angular momentum, volume, virial parameter, etc.), I.e. errors vary with the number N of nodes per direction as ˜1/N2. This is, however, not observed for purely geometrical quantities (surface area, meridional section area, volume), unless a subgrid approach is considered (I.e. boundary detection). Equilibrium sequences are also much better described, especially close to critical rotation. Yet another technical effort is required for hard EOS (n < 1), due to infinite mass density gradients at the fluid surface. We fix the problem by using kernel splitting. Finally, we propose an accelerated version of the self-consistent field (SCF) algorithm based on a node-by-node pre-conditioning of the mass density at each step. The computing time is reduced by a factor of 2 typically, regardless of the polytropic index. There is a priori no obstacle to applying these results and techniques to ellipsoidal configurations and even to 3D configurations.

An application of Chan-Vese method used to determine the ROI area in CT lung screening

NASA Astrophysics Data System (ADS)

Prokop, Paweł; Surtel, Wojciech

2016-09-01

The article presents two approaches of determining the ROI area in CT lung screening. First approach is based on a classic method of framing the image in order to determine the ROI by using a MaZda tool. Second approach is based on segmentation of CT images of the lungs and reducing the redundant information from the image. Of the two approaches of an Active Contour, it was decided to choose the Chan-Vese method. In order to determine the effectiveness of the approach, it was performed an analysis of received ROI texture and extraction of textural features. In order to determine the effectiveness of the method, it was performed an analysis of the received ROI textures and extraction of the texture features, by using a Mazda tool. The results were compared and presented in the form of the radar graphs. The second approach proved to be effective and appropriate and consequently it is used for further analysis of CT images, in the computer-aided diagnosis of sarcoidosis.