77 FR 65395 - Notice of Submission of Proposed Information Collection to OMB: Section 8 Contract Renewal Policy...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

... Project- Based Section 8 Contracts AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice... through the use of appropriate automated collection techniques or other forms of information technology, e... Section 8 project-based assistance contracts are renewed. The Section 8 contract renewal process is an...

Communication: Electron ionization of DNA bases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rahman, M. A.; Krishnakumar, E., E-mail: ekkumar@tifr.res.in

2016-04-28

No reliable experimental data exist for the partial and total electron ionization cross sections for DNA bases, which are very crucial for modeling radiation damage in genetic material of living cell. We have measured a complete set of absolute partial electron ionization cross sections up to 500 eV for DNA bases for the first time by using the relative flow technique. These partial cross sections are summed to obtain total ion cross sections for all the four bases and are compared with the existing theoretical calculations and the only set of measured absolute cross sections. Our measurements clearly resolve themore » existing discrepancy between the theoretical and experimental results, thereby providing for the first time reliable numbers for partial and total ion cross sections for these molecules. The results on fragmentation analysis of adenine supports the theory of its formation in space.« less

33 CFR 162.210 - Lake Tahoe, Calif.; restricted areas along south shore.

Code of Federal Regulations, 2011 CFR

2011-07-01

... line of Lot 2, Section 26, Township 13 North (Mount Diablo Base Line), Range 17 East (Mount Diablo..., Section 6, Township 12 North (Mount Diablo Base Line), Range 18 East (Mount Diablo Meridian); thence north... boundary line of Lot 1, Section 32, Township 13 North (Mount Diablo Base Line), Range 18 East (Mount Diablo...

33 CFR 162.210 - Lake Tahoe, Calif.; restricted areas along south shore.

Code of Federal Regulations, 2010 CFR

2010-07-01

... line of Lot 2, Section 26, Township 13 North (Mount Diablo Base Line), Range 17 East (Mount Diablo..., Section 6, Township 12 North (Mount Diablo Base Line), Range 18 East (Mount Diablo Meridian); thence north... boundary line of Lot 1, Section 32, Township 13 North (Mount Diablo Base Line), Range 18 East (Mount Diablo...

Do free caesarean section policies increase inequalities in Benin and Mali?

PubMed

Ravit, Marion; Audibert, Martine; Ridde, Valéry; De Loenzien, Myriam; Schantz, Clémence; Dumont, Alexandre

2018-06-05

Benin and Mali introduced user fee exemption policies focused on caesarean sections (C-sections) in 2005 and 2009, respectively. These policies had a positive impact on access to C-sections and facility based deliveries among all women, but the impact on socioeconomic inequality is still highly uncertain. The objective of this study was to observe whether there was an increase or a decrease in urban/rural and socioeconomic inequalities in access to C-sections and facility based deliveries after the free C-section policy was introduced. We used data from three consecutive Demographic and Health Surveys (DHS): 2001, 2006 and 2011-2012 in Benin and 2001, 2006 and 2012-13 in Mali. We evaluated trends in inequality in terms of two outcomes: C-sections and facility based deliveries. Adjusted odds ratios were used to estimate whether the distributions of C-sections and facility based deliveries favoured the least advantaged categories (rural, non-educated and poorest women) or the most advantaged categories (urban, educated and richest women). Concentration curves were used to observe the degree of wealth-related inequality in access to C-sections and facility based deliveries. We analysed 47,302 childbirths (23,266 in Benin and 24,036 in Mali). In Benin, we found no significant difference in access to C-sections between urban and rural women or between educated and non-educated women. However, the richest women had greater access to C-sections than the poorest women. There was no significant change in these inequalities in terms of access to C-sections and facility based deliveries after introduction of the free C-section policy. In Mali, we found a reduction in education-related inequalities in access to C-sections after implementation of the policy (p-value = 0.043). Inequalities between urban and rural areas had already decreased prior to implementation of the policy, but wealth-related inequalities were still present. Urban/rural and socioeconomic inequalities in C-section access did not change substantially after the countries implemented free C-section policies. User fee exemption is not enough. We recommend switching to mechanisms that combine both a universal approach and targeted action for vulnerable populations to address this issue and ensure equal health care access for all individuals.

The Effectiveness of Song Technique in Teaching Paper Based TOEFL (PBT)'s Listening Comprehension Section

ERIC Educational Resources Information Center

Kuswoyo, Heri

2013-01-01

Among three sections that follow the Paper-Based TOEFL (PBT), many test takers find listening comprehension section is the most difficult. Thus, in this research the researcher aims to explore how students learn PBT's listening comprehension section effectively through song technique. This sounds like a more interesting and engaging way to learn…

Configuration Factors for Exchange of Radiant Energy Between Axisymmetrical Sections of Cylinders, Cones, and Hemispheres and Their Bases

NASA Technical Reports Server (NTRS)

Buschman, Albert J., Jr.; Pittman, Claud M.

1961-01-01

Radiation-interchange configuration factors are derived for axisymmetrical sections of cylinders, cones, and hemispheres radiating internally to annular and circular sections of their bases and to other axisymmetrical sections. The general procedure of obtaining configuration factors is outlined and the results are presented in the form of equations, tables, and figures.

Automated Internet-Based Control of Spacecraft Groundstations: Beacon-Based Health Monitoring Concept

NASA Technical Reports Server (NTRS)

Cantwell, Brian; Twiggs, Robert; Swartwout, Michael

1997-01-01

This report serves as an update about the activities of Stanford University's Space Systems Development Laboratory (SSDL) in their beacon-based health monitoring experiment. Section 1 describes the goals of the project and the organization of the team. Section 2 provides an overview of the major components of the system, describing the general approach of automated health monitoring and the beacon signal relay. It also provides background about the SAPPHIRE spacecraft and ASSET operations system, which will be used for the experiment. Specific details about implementation and status of each element of the experiment are found in Section 3. Section 4 describes the experiment and future work, and references are contained in Section 5.

Drafting. Competency Based Curriculum.

ERIC Educational Resources Information Center

Everly, Al; And Others

This competency based drafting curriculum is presented in seven specialization sections with units in each section containing a competency statement, performance objective, learning activities, evaluation, and quiz or problem sheets. Some units also contain answer sheets and/or handout sheets. Sections and number of units presented are (1) basic…

5. NHP, Water Turbine Section, southernmost steel standpipe base with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. NHP, Water Turbine Section, southern-most steel standpipe base with concrete curbing, constructed in 1908-1909, and turbine shaft entry portals in west wall of Powerhouse Section. View is to the Northeast. - Nunn Hydroelectric Plant, On Madison River, Ennis, Madison County, MT

6. NHP, Water Turbine Section, northernmost steel standpipe base with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. NHP, Water Turbine Section, northern-most steel standpipe base with concrete curbing, constructed in 1908-1909, and turbine shaft entry portal in west wall of Powerhouse Section. View is to the Northeast. - Nunn Hydroelectric Plant, On Madison River, Ennis, Madison County, MT

Neural Network Grasping Controller for Continuum Robots

DTIC Science & Technology

2006-01-01

string encoders attached to the base of section 1 and optical encoders located at the end plates of section 1 and 2. The cables from each of the...string encoders run the entire length of the arm through the optical encoders at the lower sections, as seen in Figure 1. This configuration enables the...encoders at the base section and the optical encoders at the end plates of the distal sections, there were a number of protrusions on the surface of the arm

24 CFR 200.853 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Section 8 project-based assistance. “Project-based assistance” means Section 8 assistance that is attached to the structure (see 24 CFR 982.1(b)(1) regarding the distinction between “project-based” and “tenant-based” assistance); (2) Section 202 Program of Supportive Housing for the Elderly (Capital...

24 CFR 200.853 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Section 8 project-based assistance. “Project-based assistance” means Section 8 assistance that is attached to the structure (see 24 CFR 982.1(b)(1) regarding the distinction between “project-based” and “tenant-based” assistance); (2) Section 202 Program of Supportive Housing for the Elderly (Capital...

Managing Problem-Based Learning in Large Lecture Sections

ERIC Educational Resources Information Center

Bledsoe, Karen E.

2011-01-01

Problem-based learning can enhance reasoning and concept development among undergraduate college students by presenting content within authentic contexts. However, large lecture sections present problems and barriers to implementing PBL. This article discusses approaches used by the author to infuse PBL into large biology lecture sections, and…

12 CFR 327.5 - Assessment base.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Assessment base. 327.5 Section 327.5 Banks and... General § 327.5 Assessment base. (a) Assessment base for all insured depository institutions. Except as provided in paragraphs (b), (c), and (d) of this section, the assessment base for an insured depository...

12 CFR 327.5 - Assessment base.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Assessment base. 327.5 Section 327.5 Banks and... General § 327.5 Assessment base. (a) Assessment base for all insured depository institutions. Except as provided in paragraphs (b), (c), and (d) of this section, the assessment base for an insured depository...

Effect of wave function on the proton induced L XRP cross sections for 62Sm and 74W

NASA Astrophysics Data System (ADS)

Shehla, Kaur, Rajnish; Kumar, Anil; Puri, Sanjiv

2015-08-01

The Lk(k= 1, α, β, γ) X-ray production cross sections have been calculated for 74W and 62Sm at different incident proton energies ranging 1-5 MeV using theoretical data sets of different physical parameters, namely, the Li(i=1-3) sub-shell X-ray emission rates based on the Dirac-Fork (DF) model, the fluorescence and Coster Kronig yields based on the Dirac- Hartree-Slater (DHS) model and two sets the proton ionization cross sections based on the DHS model and the ECPSSR in order to assess the influence of the wave function on the XRP cross sections. The calculated cross sections have been compared with the measured cross sections reported in the recent compilation to check the reliability of the calculated values.

24 CFR 35.725 - Section 8 Rent adjustments.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Section 8 Rent adjustments. 35.725 Section 35.725 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance...

24 CFR 35.725 - Section 8 Rent adjustments.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Section 8 Rent adjustments. 35.725 Section 35.725 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance...

24 CFR 35.725 - Section 8 Rent adjustments.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Section 8 Rent adjustments. 35.725 Section 35.725 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance...

24 CFR 35.725 - Section 8 Rent adjustments.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Section 8 Rent adjustments. 35.725 Section 35.725 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance...

24 CFR 35.725 - Section 8 Rent adjustments.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Section 8 Rent adjustments. 35.725 Section 35.725 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Project-Based Assistance...

A conodont-based standard reference section in central Nevada for the lower Middle Ordovician Whiterockian Series

USGS Publications Warehouse

Sweet, W.C.; Ethington, Raymond L.; Harris, A.G.

2005-01-01

Ranges of conodonts in stratigraphic sections at five localities in the Monitor and Antelope ranges of central Nevada are used graphically to assemble a standard reference section for the lower Middle Ordovician Whiterockian Series. The base of the series is officially 0.3 m above the base of the Antelope Valley Limestone in the stratotype in Whiterock Canyon (Monitor Range). The top is the level at which Baltoniodus gerdae makes a brief appearance in an exposure of the Copenhagen Formation on the flanks of Hill 8308 in the western Antelope Range. Graphic compilation of the sections considered in this report also indicates that a level correlative with the base of the Whiterockian Series in the stratotype section is 66 m above the base of the Antelope Valley Limestone in its de facto type section on Martin Ridge in the eastern part of the Monitor Range. Ranges, diversity, and the composition of the conodont faunas differ markedly in lithofacies adjacent to the basal boundary of the series; hence we are unable to identify a single conodont species, in a credible developmental sequence, to serve as biological marker of that boundary.

Changes in caesarean section rates and milk feeding patterns of infants between 1986 and 2013 in the Dominican Republic.

PubMed

McLennan, John D

2016-10-01

The relationship between caesarean sections (C-sections) and infant feeding varies between different samples and indicators of feeding. The current study aimed to determine the relationship between C-sections and five indicators of infant milk feeding (breast-feeding within 1 h after delivery, at the time of the survey (current) and ever; milk-based prelacteal feeds; and current non-breast milk use) over time in a country with a rapidly rising C-section rate. Secondary data analysis on cross-sectional data from Demographic and Health Surveys from six different time points between 1986 and 2013. Dominican Republic. Infants under 6 months of age. Over 90 % of infants were ever breast-fed in each survey sample. However, non-breast milk use has expanded over time with a concomitant drop in predominant breast-feeding. C-section prevalence has increased over time reaching 63 % of sampled infants in the most recent survey. C-sections remained significantly related to three infant feeding practices - the child not put to the breast within 1 h after delivery, milk-based prelacteal feeds and current non-breast milk use - in multivariate models that included sociodemographic control variables. However, current non-breast milk use was no longer related to C-sections when milk-based prelacteal feeds were factored into the model. Reducing or avoiding milk-based prelacteal feeds, particularly among those having C-sections, may improve subsequent breast-feeding patterns. Simultaneously, efforts are needed to understand and help reduce the exceptionally high C-section rate in the Dominican Republic.

42 CFR 476.70 - Statutory bases and applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Statutory bases and applicability. 476.70 Section 476.70 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES....70 Statutory bases and applicability. (a) Statutory bases. Sections 1154, 1866(a)(1)(F), and 1886(f...

48 CFR 1436.570 - Prohibition against use of lead-based paint.

Code of Federal Regulations, 2012 CFR

2012-10-01

... lead-based paint. 1436.570 Section 1436.570 Federal Acquisition Regulations System DEPARTMENT OF THE... 1436.570 Prohibition against use of lead-based paint. (a) Definitions. As used in this section... of Lead-Based Paint, in solicitations and contracts when construction of residential structures or...

48 CFR 1436.570 - Prohibition against use of lead-based paint.

Code of Federal Regulations, 2014 CFR

2014-10-01

... lead-based paint. 1436.570 Section 1436.570 Federal Acquisition Regulations System DEPARTMENT OF THE... 1436.570 Prohibition against use of lead-based paint. (a) Definitions. As used in this section... of Lead-Based Paint, in solicitations and contracts when construction of residential structures or...

48 CFR 1436.570 - Prohibition against use of lead-based paint.

Code of Federal Regulations, 2013 CFR

2013-10-01

... lead-based paint. 1436.570 Section 1436.570 Federal Acquisition Regulations System DEPARTMENT OF THE... 1436.570 Prohibition against use of lead-based paint. (a) Definitions. As used in this section... of Lead-Based Paint, in solicitations and contracts when construction of residential structures or...

48 CFR 1436.570 - Prohibition against use of lead-based paint.

Code of Federal Regulations, 2011 CFR

2011-10-01

... lead-based paint. 1436.570 Section 1436.570 Federal Acquisition Regulations System DEPARTMENT OF THE... 1436.570 Prohibition against use of lead-based paint. (a) Definitions. As used in this section... of Lead-Based Paint, in solicitations and contracts when construction of residential structures or...

21 CFR 172.585 - Sugar beet extract flavor base.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sugar beet extract flavor base. 172.585 Section... Related Substances § 172.585 Sugar beet extract flavor base. Sugar beet extract flavor base may be safely used in food in accordance with the provisions of this section. (a) Sugar beet extract flavor base is...

Pedestal substrate for coated optics

DOEpatents

Hale, Layton C.; Malsbury, Terry N.; Patterson, Steven R.

2001-01-01

A pedestal optical substrate that simultaneously provides high substrate dynamic stiffness, provides low surface figure sensitivity to mechanical mounting hardware inputs, and constrains surface figure changes caused by optical coatings to be primarily spherical in nature. The pedestal optical substrate includes a disk-like optic or substrate section having a top surface that is coated, a disk-like base section that provides location at which the substrate can be mounted, and a connecting cylindrical section between the base and optics or substrate sections. The connecting cylindrical section may be attached via three spaced legs or members. However, the pedestal optical substrate can be manufactured from a solid piece of material to form a monolith, thus avoiding joints between the sections, or the disk-like base can be formed separately and connected to the connecting section. By way of example, the pedestal optical substrate may be utilized in the fabrication of optics for an extreme ultraviolet (EUV) lithography imaging system, or in any optical system requiring coated optics and substrates with reduced sensitivity to mechanical mounts.

Methodology Series Module 3: Cross-sectional Studies.

PubMed

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case-control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

Methodology Series Module 3: Cross-sectional Studies

PubMed Central

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case–control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design. PMID:27293245

Effect of wave function on the proton induced L XRP cross sections for {sub 62}Sm and {sub 74}W

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shehla,; Kaur, Rajnish; Kumar, Anil

The L{sub k}(k= 1, α, β, γ) X-ray production cross sections have been calculated for {sub 74}W and {sub 62}Sm at different incident proton energies ranging 1-5 MeV using theoretical data sets of different physical parameters, namely, the Li(i=1-3) sub-shell X-ray emission rates based on the Dirac-Fork (DF) model, the fluorescence and Coster Kronig yields based on the Dirac- Hartree-Slater (DHS) model and two sets the proton ionization cross sections based on the DHS model and the ECPSSR in order to assess the influence of the wave function on the XRP cross sections. The calculated cross sections have been compared withmore » the measured cross sections reported in the recent compilation to check the reliability of the calculated values.« less

Section 504 Compliance in Missouri School Districts: A Problem-Based Discrepancy Analysis

ERIC Educational Resources Information Center

Spurgin, Armand; Steffes, Terri; Wilson, Suzanne

2013-01-01

This report describes a problem based learning project focusing on Section 504 Compliance in the State of Missouri. Additionally it provides information about Superintendent's perceptions and levels of knowledge about Section 504 compliance in their districts. The project team sought to learn and understand the historical timeline of legislation…

San Antonio Creek Restoration, Vandenberg Air Force Base, California

DTIC Science & Technology

2008-06-27

Management (Section 4.5), Human Health and Safety (Section 4.6), Land Use and Aesthetics (Section 4.7), 1 FINAL DRAFT and Transportation...Environmental Assessment for the San Antonio Creek Restoration at Vandenberg Air Force Base, California Environmental, Safety , and Occupational Health...Environmental, Safety , and Occupational Health Council Vandenberg AFB, CA MAJCOM Approval

24 CFR 968.103 - Allocation of funds under section 14.

Code of Federal Regulations, 2012 CFR

2012-04-01

... section is greater than one percent, the number of units on which formula funding is based will be the... there has been a one percent reduction in units on a cumulative basis; (ii) A reduction in formula... (c) of this section. (d) Formula allocation based on relative needs. After determining the amounts to...

34 CFR 300.35 - Scientifically based research.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true Scientifically based research. 300.35 Section 300.35... CHILDREN WITH DISABILITIES General Definitions Used in This Part § 300.35 Scientifically based research. Scientifically based research has the meaning given the term in section 9101(37) of the ESEA. (Authority: 20 U.S...

34 CFR 300.35 - Scientifically based research.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Scientifically based research. 300.35 Section 300.35... CHILDREN WITH DISABILITIES General Definitions Used in This Part § 300.35 Scientifically based research. Scientifically based research has the meaning given the term in section 9101(37) of the ESEA. (Authority: 20 U.S...

Work-Based Learning: A Resource Guide for Change. Test Draft.

ERIC Educational Resources Information Center

Hudson River Center for Program Development, Glenmont, NY.

This resource guide is intended to provide New York schools, business/industry, and others with resources to develop work-based learning strategies and components. Section 1 examines the scope, foundation, categories, and operation of work-based learning. Section 2 presents detailed information about the following forms of work-based learning:…

Surface figure control for coated optics

DOEpatents

Ray-Chaudhuri, Avijit K.; Spence, Paul A.; Kanouff, Michael P.

2001-01-01

A pedestal optical substrate that simultaneously provides high substrate dynamic stiffness, provides low surface figure sensitivity to mechanical mounting hardware inputs, and constrains surface figure changes caused by optical coatings to be primarily spherical in nature. The pedestal optical substrate includes a disk-like optic or substrate section having a top surface that is coated, a disk-like base section that provides location at which the substrate can be mounted, and a connecting cylindrical section between the base and optics or substrate sections. The optic section has an optical section thickness.sup.2 /optical section diameter ratio of between about 5 to 10 mm, and a thickness variation between front and back surfaces of less than about 10%. The connecting cylindrical section may be attached via three spaced legs or members. However, the pedestal optical substrate can be manufactured from a solid piece of material to form a monolith, thus avoiding joints between the sections, or the disk-like base can be formed separately and connected to the connecting section. By way of example, the pedestal optical substrate may be utilized in the fabrication of optics for an extreme ultraviolet (EUV) lithography imaging system, or in any optical system requiring coated optics and substrates with reduced sensitivity to mechanical mounts.

SU-F-207-06: CT-Based Assessment of Tumor Volume in Malignant Pleural Mesothelioma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qayyum, F; Armato, S; Straus, C

Purpose: To determine the potential utility of computed tomography (CT) scans in the assessment of physical tumor bulk in malignant pleural mesothelioma patients. Methods: Twenty-eight patients with malignant pleural mesothelioma were used for this study. A CT scan was acquired for each patient prior to surgical resection of the tumor (median time between scan and surgery: 27 days). After surgery, the ex-vivo tumor volume was measured by a pathologist using a water displacement method. Separately, a radiologist identified and outlined the tumor boundary on each CT section that demonstrated tumor. These outlines then were analyzed to determine the total volumemore » of disease present, the number of sections with outlines, and the mean volume of disease per outlined section. Subsets of the initial patient cohort were defined based on these parameters, i.e. cases with at least 30 sections of disease with a mean disease volume of at least 3mL per section. For each subset, the R- squared correlation between CT-based tumor volume and physical ex-vivo tumor volume was calculated. Results: The full cohort of 28 patients yielded a modest correlation between CT-based tumor volume and the ex-vivo tumor volume with an R-squared value of 0.66. In general, as the mean tumor volume per section increased, the correlation of CT-based volume with the physical tumor volume improved substantially. For example, when cases with at least 40 CT sections presenting a mean of at least 2mL of disease per section were evaluated (n=20) the R-squared correlation increased to 0.79. Conclusion: While image-based volumetry for mesothelioma may not generally capture physical tumor volume as accurately as one might expect, there exists a set of conditions in which CT-based volume is highly correlated with the physical tumor volume. SGA receives royalties and licensing fees through the University of Chicago for computer-aided diagnosis technology.« less

Magnetostratigraphy susceptibility for the Guadalupian Series GSSPs (Middle Permian) in Guadalupe Mountains National Park and adjacent areas in West Texas

USGS Publications Warehouse

Wardlaw, Bruce R.; Ellwood, Brooks B.; Lambert, Lance L.; Tomkin, Jonathan H.; Bell, Gordon L.; Nestell, Galina P.

2012-01-01

Here we establish a magnetostratigraphy susceptibility zonation for the three Middle Permian Global boundary Stratotype Sections and Points (GSSPs) that have recently been defined, located in Guadalupe Mountains National Park, West Texas, USA. These GSSPs, all within the Middle Permian Guadalupian Series, define (1) the base of the Roadian Stage (base of the Guadalupian Series), (2) the base of the Wordian Stage and (3) the base of the Capitanian Stage. Data from two additional stratigraphic successions in the region, equivalent in age to the Kungurian–Roadian and Wordian–Capitanian boundary intervals, are also reported. Based on low-field, mass specific magnetic susceptibility (χ) measurements of 706 closely spaced samples from these stratigraphic sections and time-series analysis of one of these sections, we (1) define the magnetostratigraphy susceptibility zonation for the three Guadalupian Series Global boundary Stratotype Sections and Points; (2) demonstrate that χ datasets provide a proxy for climate cyclicity; (3) give quantitative estimates of the time it took for some of these sediments to accumulate; (4) give the rates at which sediments were accumulated; (5) allow more precise correlation to equivalent sections in the region; (6) identify anomalous stratigraphic horizons; and (7) give estimates for timing and duration of geological events within sections.

7 CFR 1467.20 - Market-based conservation initiatives.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Market-based conservation initiatives. 1467.20 Section 1467.20 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT....20 Market-based conservation initiatives. (a) Acceptance and use of contributions. Section 1241(e) of...

77 FR 3768 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... the TSCA Section 8(b) Inventory Data Base, Production and Site Reports'' and identified by EPA ICR No... section 8. Title: Partial Update of the TSCA Section 8(b) Inventory Data Base, Production and Site Reports... assumptions that you used. 3. Provide copies of any technical information and/or data you used that support...

A Genre-Based Investigation of Discussion Sections of Research Articles in Dentistry and Disciplinary Variation

ERIC Educational Resources Information Center

Basturkmen, Helen

2012-01-01

Outwardly the rhetorical organisation of sections of research reports in different disciplines can appear similar. Close examination, however, may reveal subtle differences. Numerous studies have drawn on the genre-based approach developed by Swales (1990, 2004) to investigate the schematic structure of sections of articles in a range of…

40 CFR 91.1003 - Exclusions based on section 216(10) of the Act.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Exclusion and Exemption of Marine SI Engines § 91.1003 Exclusions based on section 216(10) of the Act. (a) For the purpose of determining the applicability of section 216(10) of the Act, any marine SI engine as that term is...

34 CFR 222.23 - How does a local educational agency determine the aggregate assessed value of its eligible...

Code of Federal Regulations, 2010 CFR

2010-07-01

... adding together the assessed values determined pursuant to paragraph (a)(4) of this section for all... Uses for Determining Base Values Tax classifications of adjacent properties based on highest and best... aggregate assessed value of its eligible Federal property for its section 8002 payment? 222.23 Section 222...

34 CFR 222.23 - How does a local educational agency determine the aggregate assessed value of its eligible...

Code of Federal Regulations, 2012 CFR

2012-07-01

... adding together the assessed values determined pursuant to paragraph (a)(4) of this section for all... Uses for Determining Base Values Tax classifications of adjacent properties based on highest and best... aggregate assessed value of its eligible Federal property for its section 8002 payment? 222.23 Section 222...

34 CFR 222.23 - How does a local educational agency determine the aggregate assessed value of its eligible...

Code of Federal Regulations, 2011 CFR

2011-07-01

... adding together the assessed values determined pursuant to paragraph (a)(4) of this section for all... Uses for Determining Base Values Tax classifications of adjacent properties based on highest and best... aggregate assessed value of its eligible Federal property for its section 8002 payment? 222.23 Section 222...

34 CFR 222.23 - How does a local educational agency determine the aggregate assessed value of its eligible...

Code of Federal Regulations, 2013 CFR

2013-07-01

... adding together the assessed values determined pursuant to paragraph (a)(4) of this section for all... Uses for Determining Base Values Tax classifications of adjacent properties based on highest and best... aggregate assessed value of its eligible Federal property for its section 8002 payment? 222.23 Section 222...

34 CFR 222.23 - How does a local educational agency determine the aggregate assessed value of its eligible...

Code of Federal Regulations, 2014 CFR

2014-07-01

... adding together the assessed values determined pursuant to paragraph (a)(4) of this section for all... Uses for Determining Base Values Tax classifications of adjacent properties based on highest and best... aggregate assessed value of its eligible Federal property for its section 8002 payment? 222.23 Section 222...

Pregnant and Parenting Adolescents: Alternatives for Developing School-Based Programs and Services.

ERIC Educational Resources Information Center

Glosson, Linda R.; Lytle, Jacque R.

This guide suggests ways to develop and implement school-based programs and services for pregnant and parenting adolescents. The guide is organized in 10 sections. The first section summarizes the problem of teen parenthood, with information on the causes and the consequences of early pregnancy. In the second section, teen parents' needs for…

A new self-shielding method based on a detailed cross-section representation in the resolved energy domain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saygin, H.; Hebert, A.

The calculation of a dilution cross section {bar {sigma}}{sub e} is the most important step in the self-shielding formalism based on the equivalence principle. If a dilution cross section that accurately characterizes the physical situation can be calculated, it can then be used for calculating the effective resonance integrals and obtaining accurate self-shielded cross sections. A new technique for the calculation of equivalent cross sections based on the formalism of Riemann integration in the resolved energy domain is proposed. This new method is compared to the generalized Stamm`ler method, which is also based on an equivalence principle, for a two-regionmore » cylindrical cell and for a small pressurized water reactor assembly in two dimensions. The accuracy of each computing approach is obtained using reference results obtained from a fine-group slowing-down code named CESCOL. It is shown that the proposed method leads to slightly better performance than the generalized Stamm`ler approach.« less

75 FR 75207 - Regulation SBSR-Reporting and Dissemination of Security-Based Swap Information

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-02

...In accordance with Section 763 (``Section 763'') and Section 766 (``Section 766'') of Title VII (``Title VII'') of the Dodd-Frank Wall Street Reform and Consumer Protection Act (the ``Dodd-Frank Act''), the Securities and Exchange Commission (``SEC'' or ``Commission'') is proposing Regulation SBSR--Reporting and Dissemination of Security-Based Swap Information (``Regulation SBSR'') under the Securities Exchange Act of 1934 (``Exchange Act'').\\1\\ Proposed Regulation SBSR would provide for the reporting of security- based swap information to registered security-based swap data repositories or the Commission and the public dissemination of security-based swap transaction, volume, and pricing information. Registered security-based swap data repositories would be required to establish and maintain certain policies and procedures regarding how transaction data are reported and disseminated, and participants of registered security-based swap data repositories that are security- based swap dealers or major security-based swap participants would be required to establish and maintain policies and procedures that are reasonably designed to ensure that they comply with applicable reporting obligations. Finally, proposed Regulation SBSR also would require a registered SDR to register with the Commission as a securities information processor on existing Form SIP. ---------------------------------------------------------------------------

Information Resources for Education. First Edition. Information Series No. 123.

ERIC Educational Resources Information Center

Peterson, John C.; And Others

Online data bases useful in education described in this paper resulted from an information resources workshop conducted in Illinois in 1977. There are two major sections in the paper. The first section, Data Bases, contains one-page summaries of thirty-two online data bases of interest to people in education. Data base types include…

7 CFR 1412.45 - Reducing or terminating base acreage.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Reducing or terminating base acreage. 1412.45 Section... and Peanuts 2008 through 2012 § 1412.45 Reducing or terminating base acreage. (a)(1) Subject to the limitation in paragraph (a)(2) of this section, a permanent reduction of all or a portion of a farm's base...

26 CFR 1.809-10 - Computation of equity base.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 8 2013-04-01 2013-04-01 false Computation of equity base. 1.809-10 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Gain and Loss from Operations § 1.809-10 Computation of equity base. (a) In general. For purposes of section 809, the equity base of a life insurance company includes the...

26 CFR 1.809-10 - Computation of equity base.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 8 2011-04-01 2011-04-01 false Computation of equity base. 1.809-10 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Gain and Loss from Operations § 1.809-10 Computation of equity base. (a) In general. For purposes of section 809, the equity base of a life insurance company includes the...

7 CFR 1412.45 - Reducing or terminating base acreage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Reducing or terminating base acreage. 1412.45 Section... and Peanuts 2008 Through 2012 § 1412.45 Reducing or terminating base acreage. (a)(1) Subject to the limitation in paragraph (a)(2) of this section, a permanent reduction of all or a portion of a farm's base...

26 CFR 1.809-10 - Computation of equity base.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 8 2012-04-01 2012-04-01 false Computation of equity base. 1.809-10 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Gain and Loss from Operations § 1.809-10 Computation of equity base. (a) In general. For purposes of section 809, the equity base of a life insurance company includes the...

7 CFR 1412.45 - Reducing or terminating base acreage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Reducing or terminating base acreage. 1412.45 Section... and Peanuts 2008 through 2012 § 1412.45 Reducing or terminating base acreage. (a)(1) Subject to the limitation in paragraph (a)(2) of this section, a permanent reduction of all or a portion of a farm's base...

42 CFR 413.65 - Requirements for a determination that a facility or an organization has provider-based status.

Code of Federal Regulations, 2010 CFR

2010-10-01

... an organization has provider-based status. 413.65 Section 413.65 Public Health CENTERS FOR MEDICARE... or an organization has provider-based status. (a) Scope and definitions.(1) Scope. (i) This section applies to all facilities for which provider-based status is sought, including remote locations of...

7 CFR 1412.45 - Reducing or terminating base acreage.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Reducing or terminating base acreage. 1412.45 Section... and Peanuts 2008 through 2012 § 1412.45 Reducing or terminating base acreage. (a)(1) Subject to the limitation in paragraph (a)(2) of this section, a permanent reduction of all or a portion of a farm's base...

26 CFR 1.809-10 - Computation of equity base.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Computation of equity base. 1.809-10 Section 1... (CONTINUED) INCOME TAXES Gain and Loss from Operations § 1.809-10 Computation of equity base. (a) In general. For purposes of section 809, the equity base of a life insurance company includes the amount of any...

40 CFR 745.65 - Lead-based paint hazards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Lead-based paint hazards. 745.65 Section 745.65 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES... this section. (2) Any damaged or otherwise deteriorated lead-based paint on an impact surface that is...

40 CFR 745.65 - Lead-based paint hazards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Lead-based paint hazards. 745.65 Section 745.65 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES... this section. (2) Any damaged or otherwise deteriorated lead-based paint on an impact surface that is...

40 CFR 745.65 - Lead-based paint hazards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Lead-based paint hazards. 745.65 Section 745.65 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES... this section. (2) Any damaged or otherwise deteriorated lead-based paint on an impact surface that is...

Program structure-based blocking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertolli, Carlo; Eichenberger, Alexandre E.; O'Brien, John K.

2017-09-26

Embodiments relate to program structure-based blocking. An aspect includes receiving source code corresponding to a computer program by a compiler of a computer system. Another aspect includes determining a prefetching section in the source code by a marking module of the compiler. Yet another aspect includes performing, by a blocking module of the compiler, blocking of instructions located in the prefetching section into instruction blocks, such that the instruction blocks of the prefetching section only contain instructions that are located in the prefetching section.

Hypersonic Wind-Tunnel Measurements of Boundary-Layer Pressure Fluctuations

DTIC Science & Technology

2009-08-01

experiments. The third and fourth sections of the cone are designed to hold the instrumentation. The model can be run as a 0.102-m base-diameter cone...using the third section only, or 28 Figure 3.10. Glow-perturber section the fourth section can be added to increase the cone base diameter to 0.127 m...the second sensor. The third sensor shows an increase in frequency components above 15 kHz as well as a rise in lower frequencies. As transition

Optimal cross-sectional sampling for river modelling with bridges: An information theory-based method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ridolfi, E.; Napolitano, F., E-mail: francesco.napolitano@uniroma1.it; Alfonso, L.

2016-06-08

The description of river topography has a crucial role in accurate one-dimensional (1D) hydraulic modelling. Specifically, cross-sectional data define the riverbed elevation, the flood-prone area, and thus, the hydraulic behavior of the river. Here, the problem of the optimal cross-sectional spacing is solved through an information theory-based concept. The optimal subset of locations is the one with the maximum information content and the minimum amount of redundancy. The original contribution is the introduction of a methodology to sample river cross sections in the presence of bridges. The approach is tested on the Grosseto River (IT) and is compared to existingmore » guidelines. The results show that the information theory-based approach can support traditional methods to estimate rivers’ cross-sectional spacing.« less

On Sloshing Modes in Equilateral-Polygonal-Section Containers

NASA Astrophysics Data System (ADS)

Hirata, Katsuya; Tanigawa, Hirochika; Yamamoto, Masahiro; Nakashima, Tohru; Funaki, Jiro

Vertical sloshing is the liquid surface motion in a container forced to oscillate in the vertical direction. The present paper concerns the vertical sloshing in various equilateral-polygonal-section containers such as octagonal-, heptagonal-, hexagonal-, pentagonal-, square- and triangular-section containers together with a circular-section container, in order to generalise their sloshing modes. As a result, the authors classify the sloshing modes on the basis of the conventional circular-section-container sloshing modes. It is revealed that this modal classification has some advantages over that based on the conventional square-section-container sloshing modes. Furthermore, the stability diagrams for all the equilateral-polygonal-section containers are investigated by both experiments and computations. The present computation is based on a discrete singularity method. The proposed modal classification is useful to predict the eigen frequencies. Specifically speaking, it is found that the equivalent diameter de1 based on the hydraulic mean depth is the most adequate as a characteristic length scale to classify all the sloshing modes. The authors show a unified formula to predict the eigen frequencies, using de1 together with the proposed modal classification.

32 CFR 185.5 - Responsibilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... development of an MSCA data base and emergency reporting system, as described in paragraph (j) of this section... parameters of the DoD Resources Data Base (DODRDB) for MSCA, which is described in paragraph (n) of this section. Facilitate use of that data base to support decentralized management of MSCA in time of emergency...

49 CFR 1544.230 - Fingerprint-based criminal history records checks (CHRC): Flightcrew members.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Fingerprint-based criminal history records checks (CHRC): Flightcrew members. 1544.230 Section 1544.230 Transportation Other Regulations Relating to... Fingerprint-based criminal history records checks (CHRC): Flightcrew members. (a) Scope. This section applies...

49 CFR 1544.230 - Fingerprint-based criminal history records checks (CHRC): Flightcrew members.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 9 2013-10-01 2013-10-01 false Fingerprint-based criminal history records checks (CHRC): Flightcrew members. 1544.230 Section 1544.230 Transportation Other Regulations Relating to... Fingerprint-based criminal history records checks (CHRC): Flightcrew members. (a) Scope. This section applies...

49 CFR 1544.230 - Fingerprint-based criminal history records checks (CHRC): Flightcrew members.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 9 2012-10-01 2012-10-01 false Fingerprint-based criminal history records checks (CHRC): Flightcrew members. 1544.230 Section 1544.230 Transportation Other Regulations Relating to... Fingerprint-based criminal history records checks (CHRC): Flightcrew members. (a) Scope. This section applies...

49 CFR 1544.230 - Fingerprint-based criminal history records checks (CHRC): Flightcrew members.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 9 2014-10-01 2014-10-01 false Fingerprint-based criminal history records checks (CHRC): Flightcrew members. 1544.230 Section 1544.230 Transportation Other Regulations Relating to... Fingerprint-based criminal history records checks (CHRC): Flightcrew members. (a) Scope. This section applies...

42 CFR 476.70 - Statutory bases and applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Statutory bases and applicability. 476.70 Section 476.70 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES....70 Statutory bases and applicability. (a) Statutory basis. Sections 1154, 1866(a)(1)(F) and 1886(f)(2...

42 CFR 480.103 - Statutory bases for disclosure of information.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Statutory bases for disclosure of information. 480.103 Section 480.103 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND... Organizations (QIOs) General Provisions § 480.103 Statutory bases for disclosure of information. (a) Section...

42 CFR 476.70 - Statutory bases and applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Statutory bases and applicability. 476.70 Section 476.70 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES....70 Statutory bases and applicability. (a) Statutory basis. Sections 1154, 1866(a)(1)(F) and 1886(f)(2...

42 CFR 480.103 - Statutory bases for disclosure of information.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Statutory bases for disclosure of information. 480.103 Section 480.103 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND... Organizations (QIOs) General Provisions § 480.103 Statutory bases for disclosure of information. (a) Section...

42 CFR 480.103 - Statutory bases for disclosure of information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Statutory bases for disclosure of information. 480.103 Section 480.103 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND... Organizations (QIOs) General Provisions § 480.103 Statutory bases for disclosure of information. (a) Section...

49 CFR 1544.230 - Fingerprint-based criminal history records checks (CHRC): Flightcrew members.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Fingerprint-based criminal history records checks (CHRC): Flightcrew members. 1544.230 Section 1544.230 Transportation Other Regulations Relating to... Fingerprint-based criminal history records checks (CHRC): Flightcrew members. (a) Scope. This section applies...

42 CFR 480.103 - Statutory bases for disclosure of information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Statutory bases for disclosure of information. 480.103 Section 480.103 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND... Organizations (QIOs) General Provisions § 480.103 Statutory bases for disclosure of information. (a) Section...

Computer-based Learning of Neuroanatomy: A Longitudinal Study of Learning, Transfer, and Retention

PubMed Central

Chariker, Julia H.; Naaz, Farah; Pani, John R.

2013-01-01

A longitudinal experiment was conducted to evaluate the effectiveness of new methods for learning neuroanatomy with computer-based instruction. Using a 3D graphical model of the human brain, and sections derived from the model, tools for exploring neuroanatomy were developed to encourage adaptive exploration. This is an instructional method which incorporates graphical exploration in the context of repeated testing and feedback. With this approach, 72 participants learned either sectional anatomy alone or whole anatomy followed by sectional anatomy. Sectional anatomy was explored either with perceptually continuous navigation through the sections or with discrete navigation (as in the use of an anatomical atlas). Learning was measured longitudinally to a high performance criterion. Subsequent tests examined transfer of learning to the interpretation of biomedical images and long-term retention. There were several clear results of this study. On initial exposure to neuroanatomy, whole anatomy was learned more efficiently than sectional anatomy. After whole anatomy was mastered, learners demonstrated high levels of transfer of learning to sectional anatomy and from sectional anatomy to the interpretation of complex biomedical images. Learning whole anatomy prior to learning sectional anatomy led to substantially fewer errors overall than learning sectional anatomy alone. Use of continuous or discrete navigation through sectional anatomy made little difference to measured outcomes. Efficient learning, good long-term retention, and successful transfer to the interpretation of biomedical images indicated that computer-based learning using adaptive exploration can be a valuable tool in instruction of neuroanatomy and similar disciplines. PMID:23349552

National Bureau Of Standards Data Base Of Photon Absorption Cross Sections From 10 eV To 100 deV

NASA Astrophysics Data System (ADS)

Saloman, E. B.; Hubbell, J. H.; Berger, M. J.

1988-07-01

The National Bureau of Standards (NBS) has maintained a data base of experimental and theoretical photon absorption cross sections (attenuation coefficients) since 1950. Currently the measured data include more than 20,000 data points abstracted from more than 500 independen.t literature sources including both published and unpublished reports and private communications. We have recently completed a systematic comparison over the energy range 0.1-100 keV of the measured cross sections in the NBS data base with cross sections obtained using the photoionization cross sections calculated by Scofield and the semi-empirical set of recommended photoionization cross section values of Henke et al. Cross sections for coherent and incoherent scattering were added to that of photoionization to obtain a value which could be compared to the experimental results. At energies above 1 keV, agreement between theory and experiment is rather good except for some special situations which prevent the accurate description of the measured samples as free atoms. These include molecular effects near absorption edges and solid state and crystal effects (such as for silicon). Below 1 keV the comparison indicates the range of atomic numbers and energies where the theory becomes inapplicable. The results obtained using Henke et al. agree well with the measured data when such data exist, but there are many elements for which data are not available over a wide range of energies. Comparisons with other theoretical data are in progress. This study also enabled us to show that a suggested renormalization procedure to the Scofield calculation (from dartree-Slater to Hartree-Fock) worsened the agreement between the theory and experiment. We have recently developed a PC-based computer program to generate theoretical cross section values based on Scofield's calculation. We have also completed a related program to enable a user to extract selected data from the measured data base.

M ξ, M αβ, M γ and M m X-ray production cross-sections for elements with 71⩽ z⩽92 at 5.96 keV photon energy

NASA Astrophysics Data System (ADS)

Sharma, Manju; Sharma, Veena; Kumar, Sanjeev; Puri, S.; Singh, Nirmal

2006-11-01

The M ξ, M αβ, M γ and M m X-ray production (XRP) cross-sections have been measured for the elements with 71⩽ Z⩽92 at 5.96 keV incident photon energy satisfying EM1< Einc< EL3, where EM1(L3) is the M 1(L 3) subshell binding energy. These XRP cross-sections have been calculated using photoionization cross-sections based on the relativistic Dirac-Hartree-Slater (RDHS) model with three sets of X-ray emission rates, fluorescence, Coster-Kronig and super Coster-Kronig yields based on (i) the non-relativistic Hartree-Slater (NRHS) potential model, (ii) the RDHS model and (iii) the relativistic Dirac-Fock (RDF) model. For the third set, the M i ( i=1-5) subshell fluorescence yields have been calculated using the RDF model-based X-ray emission rates and total widths reevaluated to incorporate the RDF model-based radiative widths. The measured cross-sections have been compared with the calculated values to check the applicability of the physical parameters based on different models.

7. PHOTOCOPY, ELEVATION AND SECTION DRAWING OF MESS HALL. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. PHOTOCOPY, ELEVATION AND SECTION DRAWING OF MESS HALL. - NIKE Missile Base SL-40, Mess Hall, East central portion of base, southeast of Barracks No. 2, northwest of Administration Building, Hecker, Monroe County, IL

Theme-Based Courses Foster Student Learning and Promote Comfort with Learning New Material

ERIC Educational Resources Information Center

Tessier, Lisa; Tessier, Jack

2015-01-01

In this article, we review the literature about theme-based teaching, then report quantitative and qualitative results from surveys from three different courses: one section of a 100-level in-person art course; five sections of 300-level on-line art courses; and one section of a 100-level in-person biology course at SUNY Delhi with applied themes…

Detection of Tree Crowns Based on Reclassification Using Aerial Images and LIDAR Data

NASA Astrophysics Data System (ADS)

Talebi, S.; Zarea, A.; Sadeghian, S.; Arefi, H.

2013-09-01

Tree detection using aerial sensors in early decades was focused by many researchers in different fields including Remote Sensing and Photogrammetry. This paper is intended to detect trees in complex city areas using aerial imagery and laser scanning data. Our methodology is a hierarchal unsupervised method consists of some primitive operations. This method could be divided into three sections, in which, first section uses aerial imagery and both second and third sections use laser scanners data. In the first section a vegetation cover mask is created in both sunny and shadowed areas. In the second section Rate of Slope Change (RSC) is used to eliminate grasses. In the third section a Digital Terrain Model (DTM) is obtained from LiDAR data. By using DTM and Digital Surface Model (DSM) we would get to Normalized Digital Surface Model (nDSM). Then objects which are lower than a specific height are eliminated. Now there are three result layers from three sections. At the end multiplication operation is used to get final result layer. This layer will be smoothed by morphological operations. The result layer is sent to WG III/4 to evaluate. The evaluation result shows that our method has a good rank in comparing to other participants' methods in ISPRS WG III/4, when assessed in terms of 5 indices including area base completeness, area base correctness, object base completeness, object base correctness and boundary RMS. With regarding of being unsupervised and automatic, this method is improvable and could be integrate with other methods to get best results.

5 CFR 9901.355 - Setting pay upon reduction in band.

Code of Federal Regulations, 2010 CFR

2010-01-01

... involuntarily, the setting of the employee's base salary rate is subject to the rules in this section. As..., the employee's base salary may be reduced, subject to the requirements in paragraph (b) of this section. The employee may be eligible for an increase to base salary, subject to the requirements in...

Research-Based Options for Education Policymaking: Regulating Charter Schools

ERIC Educational Resources Information Center

Mathis, William J.

2016-01-01

This is a section of "Research-Based Options for Education Policymaking," a multipart brief that takes up a number of important policy issues and identifies policies supported by research. Each section focuses on a different issue, and its recommendations to policymakers are based on the latest scholarship. A founding premise of charter…

37 CFR 2.35 - Adding, deleting, or substituting bases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Adding, deleting, or substituting bases. 2.35 Section 2.35 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK..., deleting, or substituting bases. (a) In an application under section 66(a) of the Act, an applicant may not...

37 CFR 2.35 - Adding, deleting, or substituting bases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Adding, deleting, or substituting bases. 2.35 Section 2.35 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK..., deleting, or substituting bases. (a) In an application under section 66(a) of the Act, an applicant may not...

37 CFR 2.35 - Adding, deleting, or substituting bases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Adding, deleting, or substituting bases. 2.35 Section 2.35 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK..., deleting, or substituting bases. (a) In an application under section 66(a) of the Act, an applicant may not...

27 CFR 9.166 - Diamond Mountain District.

Code of Federal Regulations, 2010 CFR

2010-04-01

... counties intersects Petrified Forest Road in Section 3 of Township 8 North, Range 7 West, Mount Diablo Base... Township 9 North, Range 7 West, Mount Diablo Base and Meridian, in the Mallacomes land grant; (2) Then... Ritchey Creek in Section 3 of Township 8 North, Range 6 West, Mount Diablo Base and Meridian; (3) Then...

27 CFR 9.166 - Diamond Mountain District.

Code of Federal Regulations, 2011 CFR

2011-04-01

... counties intersects Petrified Forest Road in Section 3 of Township 8 North, Range 7 West, Mount Diablo Base... Township 9 North, Range 7 West, Mount Diablo Base and Meridian, in the Mallacomes land grant; (2) Then... Ritchey Creek in Section 3 of Township 8 North, Range 6 West, Mount Diablo Base and Meridian; (3) Then...

12 CFR 327.12 - Prepayment of quarterly risk-based assessments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (b)(2) and (3) of this section shall be determined based upon data in the FDIC's computer systems as of December 24, 2009. Changes to data underlying an institution's adjusted total base assessment rate... data changes as provided in paragraph (b)(4) of this section. (d) Payment of prepaid assessment. Each...

37 CFR 2.35 - Adding, deleting, or substituting bases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Adding, deleting, or substituting bases. 2.35 Section 2.35 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK..., deleting, or substituting bases. (a) In an application under section 66(a) of the Act, an applicant may not...

Sources and Nature of Cost Analysis Data Base Reference Manual.

DTIC Science & Technology

1983-07-01

COVERED Sources and Nature of Cost Analysis Data Base Interim Report (Update) Reference Manual 6 . PERFORMING ORG. REPORT NUMBER USAAVRADCOM TM 83-F-3 7 ...SECTION 6 - DATA FOR MULTIPLE APPLICATIONS 6.0.0 7.0.0 SECTION 7 - GLOSSARY OF COST ANALYSIS TERMS SECTION 8 - REFERENCES 8.0.0 SECTION 9 - BIBLIOGRAPHY...Relationsh-;ips Manual for the Army 1.14. 1 Yateri ci Command, TP-449, Mla; 1912 ( 7 21 RACKFORS JiR 1CO(PTER, INC. xlB.Aii- 6 -4A 1.15. 1 Z FNE>:THj MUNSON

Endoscope and System and Method of Operation Thereof

NASA Technical Reports Server (NTRS)

Manohara, Harish M. (Inventor); Liao, Anna (Inventor); Bae, Youngsam (Inventor); Shahinian, Hrayr Karnig (Inventor)

2017-01-01

An endoscope including a rigid section having opposed first and second ends and an opening situated between the first and second ends, the rigid section defining a longitudinal axis; a handle portion coupled to a first end of the rigid section and having first and second scissor-type handles suitable for grasping by a user; and a base part situated at the second end of the rigid section and coupled to the first handle of the scissor-type handles such that displacement of the first handle causes a rotation of the base part.

Endoscope and System and Method of Operation Thereof

NASA Technical Reports Server (NTRS)

Manohara, Harish M. (Inventor); Liao, Anna (Inventor); Bae, Youngsam (Inventor); Shahinian, Hrayr Karnig (Inventor)

2012-01-01

An endoscope including a rigid section having opposed first and second ends and an opening situated between the first and second ends, the rigid section defining a longitudinal axis; a handle portion coupled to a first end of the rigid section and having first and second scissor-type handles suitable for grasping by a user; and a base part situated at the second end of the rigid section and coupled to the first handle of the scissor-type handles such that displacement of the first handle causes a rotation of the base part.

SECTION BB, FLOOR PLAN Dyess Air Force Base, Atlas ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SECTION B-B, FLOOR PLAN - Dyess Air Force Base, Atlas F Missle Site S-8, Launch Facility, Approximately 3 miles east of Winters, 500 feet southwest of Highway 1770, center of complex, Winters, Runnels County, TX

Performance-Based Student Assessment: Challenges and Possibilities. Ninety-Fifth Yearbook of the National Society for the Study of Education, Part I.

ERIC Educational Resources Information Center

Baron, Joan Boykoff, Ed.; Wolf, Dennie Palmer, Ed.

1996-01-01

These discussions of performance-based student assessment provide a record of a decade-long exploration of unsettled issues in assessment. The first section provides the elements of a basic rationale for performance-based assessment, while the second section contains accounts of efforts to develop new performance-based systems in one city and four…

6. INTERIOR, ORIGINAL BLOCKHOUSE SECTION OF BUILDING 0512, NORTH WALL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR, ORIGINAL BLOCKHOUSE SECTION OF BUILDING 0512, NORTH WALL FACING TEST TRACK. - Edwards Air Force Base, South Base Sled Track, Instrumentation & Control Building, South of Sled Track, Station "50" area, Lancaster, Los Angeles County, CA

SECTION AA, AXONOMETRIC Dyess Air Force Base, Atlas F ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SECTION A-A, AXONOMETRIC - Dyess Air Force Base, Atlas F Missle Site S-8, Launch Control Center (LCC), Approximately 3 miles east of Winters, 500 feet southwest of Highway 17700, northwest of Launch Facility, Winters, Runnels County, TX

18 CFR 35.35 - Transmission infrastructure investment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... infrastructure investment. 35.35 Section 35.35 Conservation of Power and Water Resources FEDERAL ENERGY... AND TARIFFS Transmission Infrastructure Investment Provisions § 35.35 Transmission infrastructure investment. (a) Purpose. This section establishes rules for incentive-based (including performance-based...

Child and Adolescent Mental Health Research in the Context of Hurricane Katrina: An Ecological Needs-Based Perspective and Introduction to the Special Section

ERIC Educational Resources Information Center

Weems, Carl F.; Overstreet, Stacy

2008-01-01

This article introduces the special section on child and adolescent mental health research in the context of Hurricane Katrina. We outline the purpose and intent of the special section and present an integrative perspective based on broad contextual theories of human development with which to think about the impact of disasters like Katrina. The…

Declining Fertility and the Use of Cesarean Delivery: Evidence from a Population-Based Study in Taiwan

PubMed Central

Ma, Ke-Zong M; Norton, Edward C; Lee, Shoou-Yih D

2010-01-01

Objective To test the hypothesis that declining fertility would affect the number of cesarean sections (c-sections) on maternal demand, but not medically indicated c-sections. Data Sources The 1996–2004 National Health Insurance Research Database in Taiwan for all singleton deliveries. Study Design Retrospective population-based, longitudinal study. Estimation was performed using multinomial probit models. Principal Findings Results revealed that declining fertility had a significant positive effect on the probability of having a c-section on maternal request but not medically indicated c-section. Conclusions Our findings offer a precautionary note to countries experiencing a fertility decline. Policies to contain the rise of c-sections should understand the role of women's preferences, especially regarding cesarean deliveries on maternal request. PMID:20545781

Microscopic neural image registration based on the structure of mitochondria

NASA Astrophysics Data System (ADS)

Cao, Huiwen; Han, Hua; Rao, Qiang; Xiao, Chi; Chen, Xi

2017-02-01

Microscopic image registration is a key component of the neural structure reconstruction with serial sections of neural tissue. The goal of microscopic neural image registration is to recover the 3D continuity and geometrical properties of specimen. During image registration, various distortions need to be corrected, including image rotation, translation, tissue deformation et.al, which come from the procedure of sample cutting, staining and imaging. Furthermore, there is only certain similarity between adjacent sections, and the degree of similarity depends on local structure of the tissue and the thickness of the sections. These factors make the microscopic neural image registration a challenging problem. To tackle the difficulty of corresponding landmarks extraction, we introduce a novel image registration method for Scanning Electron Microscopy (SEM) images of serial neural tissue sections based on the structure of mitochondria. The ellipsoidal shape of mitochondria ensures that the same mitochondria has similar shape between adjacent sections, and its characteristic of broad distribution in the neural tissue guarantees that landmarks based on the mitochondria distributed widely in the image. The proposed image registration method contains three parts: landmarks extraction between adjacent sections, corresponding landmarks matching and image deformation based on the correspondences. We demonstrate the performance of our method with SEM images of drosophila brain.

Computer-based learning in neuroanatomy: A longitudinal study of learning, transfer, and retention

NASA Astrophysics Data System (ADS)

Chariker, Julia H.

A longitudinal experiment was conducted to explore computer-based learning of neuroanatomy. Using a realistic 3D graphical model of neuroanatomy, and sections derived from the model, exploratory graphical tools were integrated into interactive computer programs so as to allow adaptive exploration. 72 participants learned either sectional anatomy alone or learned whole anatomy followed by sectional anatomy. Sectional anatomy was explored either in perceptually continuous animation or discretely, as in the use of an anatomical atlas. Learning was measured longitudinally to a high performance criterion. After learning, transfer to biomedical images and long-term retention was tested. Learning whole anatomy prior to learning sectional anatomy led to a more efficient learning experience. Learners demonstrated high levels of transfer from whole anatomy to sectional anatomy and from sectional anatomy to complex biomedical images. All learning groups demonstrated high levels of retention at 2--3 weeks.

Stable density stratification solar pond

NASA Technical Reports Server (NTRS)

Lansing, F. L. (Inventor)

1985-01-01

A stable density-stratification solar pond for use in the collection and storage of solar thermal energy including a container having a first section characterized by an internal wall of a substantially cylindrical configuration and a second section having an internal wall of a substantially truncated conical configuration surmounting the first section in coaxial alignment therewith, the second section of said container being characterized by a base of a diameter substantially equal to the diameter of the first section and a truncated apex defining a solar energy acceptance opening is discussed. A body of immiscible liquids is disposed within the container and comprises a lower portion substantially filling the first section of the container and an upper portion substantially filling the second section of the container, said lower portion being an aqueous based liquid of a darker color than the upper portion and of a greater density. A protective cover plate is removably provided for covering the acceptance opening.

42 CFR 441.710 - State plan home and community-based services under section 1915(i)(1) of the Act.

Code of Federal Regulations, 2014 CFR

2014-10-01

... section. (1) Home and community-based settings must have all of the following qualities, and such other qualities as the Secretary determines to be appropriate, based on the needs of the individual as indicated... work in competitive integrated settings, engage in community life, control personal resources, and...

40 CFR 112.20 - Facility response plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... response plan based on the criteria in paragraph (f)(1) of this section, the owner or operator shall submit..., and is required to prepare and submit a response plan based on the criteria in paragraph (f)(1) of..., based on the factors in paragraph (f)(3) of this section. If such a determination is made, the Regional...

40 CFR 112.20 - Facility response plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... response plan based on the criteria in paragraph (f)(1) of this section, the owner or operator shall submit..., and is required to prepare and submit a response plan based on the criteria in paragraph (f)(1) of..., based on the factors in paragraph (f)(3) of this section. If such a determination is made, the Regional...

Vocational Education Home Economics Education Teacher Handbook Grades 7-12. North Carolina Competency-Based Curriculum.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This teacher handbook provides recommended goals and objectives and suggested measures for the competency-based secondary home economics curriculum in North Carolina. The guide is organized in two sections. The first section consists of an overview of the North Carolina Standard Course of Study and the competency-based curriculum. Information on…

78 FR 68735 - Reduction or Suspension of Safe Harbor Contributions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-15

... forth in section 401(k)(3), called the actual deferral percentage (ADP) test, or one of the design-based... design-based safe harbor method under which a CODA is treated as satisfying the ADP test if the... the design-based alternatives in section 401(m)(10), 401(m)(11), or 401(m)(12). The ACP test in...

Application of fuzzy logic-neural network based reinforcement learning to proximity and docking operations: Translational controller results

NASA Technical Reports Server (NTRS)

Jani, Yashvant

1992-01-01

The reinforcement learning techniques developed at Ames Research Center are being applied to proximity and docking operations using the Shuttle and Solar Maximum Mission (SMM) satellite simulation. In utilizing these fuzzy learning techniques, we also use the Approximate Reasoning based Intelligent Control (ARIC) architecture, and so we use two terms interchangeable to imply the same. This activity is carried out in the Software Technology Laboratory utilizing the Orbital Operations Simulator (OOS). This report is the deliverable D3 in our project activity and provides the test results of the fuzzy learning translational controller. This report is organized in six sections. Based on our experience and analysis with the attitude controller, we have modified the basic configuration of the reinforcement learning algorithm in ARIC as described in section 2. The shuttle translational controller and its implementation in fuzzy learning architecture is described in section 3. Two test cases that we have performed are described in section 4. Our results and conclusions are discussed in section 5, and section 6 provides future plans and summary for the project.

76 FR 2416 - Civil Rights Division, Federal Coordination and Compliance Section; Agency Information Collection...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-13

..., national origin, sex, religion, age, or other bases. Federal Coordination and Compliance Section serves as..., religion, age, or other bases by a public or private entity may, by himself or herself or by an authorized...

Accelerated load testing of geosynthetic base reinforced pavement test sections.

DOT National Transportation Integrated Search

2011-02-01

The main objective of this research is to evaluate the benefits of geosynthetic stabilization and reinforcement of subgrade/base aggregate layers in flexible pavements built on weak subgrades and the effect of pre-rut pavement sections, prior to the ...

PRA and Risk Informed Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernsen, Sidney A.; Simonen, Fredric A.; Balkey, Kenneth R.

2006-01-01

The Boiler and Pressure Vessel Code (BPVC) of the American Society of Mechanical Engineers (ASME) has introduced a risk based approach into Section XI that covers Rules for Inservice Inspection of Nuclear Power Plant Components. The risk based approach requires application of the probabilistic risk assessments (PRA). Because no industry consensus standard existed for PRAs, ASME has developed a standard to evaluate the quality level of an available PRA needed to support a given risk based application. The paper describes the PRA standard, Section XI application of PRAs, and plans for broader applications of PRAs to other ASME nuclear codesmore » and standards. The paper addresses several specific topics of interest to Section XI. Important consideration are special methods (surrogate components) used to overcome the lack of PRA treatments of passive components in PRAs. The approach allows calculations of conditional core damage probabilities both for component failures that cause initiating events and failures in standby systems that decrease the availability of these systems. The paper relates the explicit risk based methods of the new Section XI code cases to the implicit consideration of risk used in the development of Section XI. Other topics include the needed interactions of ISI engineers, plant operating staff, PRA specialists, and members of expert panels that review the risk based programs.« less

Measuring Coverage in MNCH: Validating Women’s Self-Report of Emergency Cesarean Sections in Ghana and the Dominican Republic

PubMed Central

Tunçalp, Özge; Stanton, Cynthia; Castro, Arachu; Adanu, Richard; Heymann, Marilyn; Adu-Bonsaffoh, Kwame; Lattof, Samantha R.; Blanc, Ann; Langer, Ana

2013-01-01

Background Cesarean section is the only surgery for which we have nearly global population-based data. However, few surveys provide additional data related to cesarean sections. Given weaknesses in many health information systems, health planners in developing countries will likely rely on nationally representative surveys for the foreseeable future. The objective is to validate self-reported data on the emergency status of cesarean sections among women delivering in teaching hospitals in the capitals of two contrasting countries: Accra, Ghana and Santo Domingo, Dominican Republic (DR). Methods and Findings This study compares hospital-based data, considered the reference standard, against women’s self-report for two definitions of emergency cesarean section based on the timing of the decision to operate and the timing of the cesarean section relative to onset of labor. Hospital data were abstracted from individual medical records, and hospital discharge interviews were conducted with women who had undergone cesarean section in two hospitals. The study assessed sensitivity, specificity, and positive predictive value of responses to questions regarding emergency versus non-emergency cesarean section and estimated the percent of emergency cesarean sections that would be obtained from a survey, given the observed prevalence, sensitivity, and specificity from this study. Hospital data were matched with exit interviews for 659 women delivered via cesarean section for Ghana and 1,531 for the Dominican Republic. In Ghana and the Dominican Republic, sensitivity and specificity for emergency cesarean section defined by decision time were 79% and 82%, and 50% and 80%, respectively. The validity of emergency cesarean defined by operation time showed less favorable results than decision time in Ghana and slightly more favorable results in the Dominican Republic. Conclusions Questions used in this study to identify emergency cesarean section are promising but insufficient to promote for inclusion in international survey questionnaires. Additional studies which confirm the accuracy of key facility-based indicators in advance of data collection and which use a longer recall period are warranted. PMID:23667428

Imaging the Material Properties of Bone Specimens using Reflection-Based Infrared Microspectroscopy

PubMed Central

Acerbo, Alvin S.; Carr, G. Lawrence; Judex, Stefan; Miller, Lisa M.

2012-01-01

Fourier Transform InfraRed Microspectroscopy (FTIRM) is a widely used method for mapping the material properties of bone and other mineralized tissues, including mineralization, crystallinity, carbonate substitution, and collagen cross-linking. This technique is traditionally performed in a transmission-based geometry, which requires the preparation of plastic-embedded thin sections, limiting its functionality. Here, we theoretically and empirically demonstrate the development of reflection-based FTIRM as an alternative to the widely adopted transmission-based FTIRM, which reduces specimen preparation time and broadens the range of specimens that can be imaged. In this study, mature mouse femurs were plastic-embedded and longitudinal sections were cut at a thickness of 4 μm for transmission-based FTIRM measurements. The remaining bone blocks were polished for specular reflectance-based FTIRM measurements on regions immediately adjacent to the transmission sections. Kramers-Kronig analysis of the reflectance data yielded the dielectric response from which the absorption coefficients were directly determined. The reflectance-derived absorbance was validated empirically using the transmission spectra from the thin sections. The spectral assignments for mineralization, carbonate substitution, and collagen cross-linking were indistinguishable in transmission and reflection geometries, while the stoichiometric/non-stoichiometric apatite crystallinity parameter shifted from 1032 / 1021 cm−1 in transmission-based to 1035 / 1025 cm−1 in reflection-based data. This theoretical demonstration and empirical validation of reflection-based FTIRM eliminates the need for thin sections of bone and more readily facilitates direct correlations with other methods such nanoindentation and quantitative backscatter electron imaging (qBSE) from the same specimen. It provides a unique framework for correlating bone’s material and mechanical properties. PMID:22455306

75 FR 5588 - Notice of a Regional Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9109-3] Notice of a Regional Waiver of Section 1605 (Buy... the United States Under the Section 1605 Waiver Authority Based on the Conclusion That Iron, Steel... Buy America requirements of ARRA Section 1605 under the authority of Section 1605(b)(2) [manufactured...

Nationwide Risk-Based PCB Remediation Waste Disposal Approvals under Title 40 of the Code of Federal Regulations (CFR) Section 761.61(c)

EPA Pesticide Factsheets

This page contains information about Nationwide Risk-Based Polychlorinated Biphenyls (PCBs) Remediation Waste Disposal Approvals under Title 40 of the Code of Federal Regulations (CFR) Section 761.61(c)

Fiber optic gap gauge

DOEpatents

Wood, Billy E [Livermore, CA; Groves, Scott E [Brentwood, CA; Larsen, Greg J [Brentwood, CA; Sanchez, Roberto J [Pleasanton, CA

2006-11-14

A lightweight, small size, high sensitivity gauge for indirectly measuring displacement or absolute gap width by measuring axial strain in an orthogonal direction to the displacement/gap width. The gap gauge includes a preferably titanium base having a central tension bar with springs connecting opposite ends of the tension bar to a pair of end connector bars, and an elongated bow spring connected to the end connector bars with a middle section bowed away from the base to define a gap. The bow spring is capable of producing an axial strain in the base proportional to a displacement of the middle section in a direction orthogonal to the base. And a strain sensor, such as a Fabry-Perot interferometer strain sensor, is connected to measure the axial strain in the base, so that the displacement of the middle section may be indirectly determined from the measurement of the axial strain in the base.

44 CFR 65.14 - Remapping of areas for which local flood protection systems no longer provide base flood protection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... local flood protection systems no longer provide base flood protection. 65.14 Section 65.14 Emergency... § 65.14 Remapping of areas for which local flood protection systems no longer provide base flood protection. (a) General. (1) This section describes the procedures to follow and the types of information...

44 CFR 65.14 - Remapping of areas for which local flood protection systems no longer provide base flood protection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... local flood protection systems no longer provide base flood protection. 65.14 Section 65.14 Emergency... § 65.14 Remapping of areas for which local flood protection systems no longer provide base flood protection. (a) General. (1) This section describes the procedures to follow and the types of information...

14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

Code of Federal Regulations, 2014 CFR

2014-01-01

... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

Code of Federal Regulations, 2013 CFR

2013-01-01

... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

Code of Federal Regulations, 2012 CFR

2012-01-01

... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

14 CFR 61.327 - Are there specific endorsement requirements to operate a light-sport aircraft based on VH?

Code of Federal Regulations, 2011 CFR

2011-01-01

... to operate a light-sport aircraft based on VH? 61.327 Section 61.327 Aeronautics and Space FEDERAL... INSTRUCTORS, AND GROUND INSTRUCTORS Sport Pilots § 61.327 Are there specific endorsement requirements to operate a light-sport aircraft based on VH? (a) Except as specified in paragraph (c) of this section, if...

44 CFR 65.14 - Remapping of areas for which local flood protection systems no longer provide base flood protection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... local flood protection systems no longer provide base flood protection. 65.14 Section 65.14 Emergency... § 65.14 Remapping of areas for which local flood protection systems no longer provide base flood protection. (a) General. (1) This section describes the procedures to follow and the types of information...

Averaging cross section data so we can fit it

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, D.

2014-10-23

The 56Fe cross section we are interested in have a lot of fluctuations. We would like to fit the average of the cross section with cross sections calculated within EMPIRE. EMPIRE is a Hauser-Feshbach theory based nuclear reaction code, requires cross sections to be smoothed using a Lorentzian profile. The plan is to fit EMPIRE to these cross sections in the fast region (say above 500 keV).

[Simulation and data analysis of stereological modeling based on virtual slices].

PubMed

Wang, Hao; Shen, Hong; Bai, Xiao-yan

2008-05-01

To establish a computer-assisted stereological model for simulating the process of slice section and evaluate the relationship between section surface and estimated three-dimensional structure. The model was designed by mathematic method as a win32 software based on the MFC using Microsoft visual studio as IDE for simulating the infinite process of sections and analysis of the data derived from the model. The linearity of the fitting of the model was evaluated by comparison with the traditional formula. The win32 software based on this algorithm allowed random sectioning of the particles distributed randomly in an ideal virtual cube. The stereological parameters showed very high throughput (>94.5% and 92%) in homogeneity and independence tests. The data of density, shape and size of the section were tested to conform to normal distribution. The output of the model and that from the image analysis system showed statistical correlation and consistency. The algorithm we described can be used for evaluating the stereologic parameters of the structure of tissue slices.

Computer-based learning: interleaving whole and sectional representation of neuroanatomy.

PubMed

Pani, John R; Chariker, Julia H; Naaz, Farah

2013-01-01

The large volume of material to be learned in biomedical disciplines requires optimizing the efficiency of instruction. In prior work with computer-based instruction of neuroanatomy, it was relatively efficient for learners to master whole anatomy and then transfer to learning sectional anatomy. It may, however, be more efficient to continuously integrate learning of whole and sectional anatomy. A study of computer-based learning of neuroanatomy was conducted to compare a basic transfer paradigm for learning whole and sectional neuroanatomy with a method in which the two forms of representation were interleaved (alternated). For all experimental groups, interactive computer programs supported an approach to instruction called adaptive exploration. Each learning trial consisted of time-limited exploration of neuroanatomy, self-timed testing, and graphical feedback. The primary result of this study was that interleaved learning of whole and sectional neuroanatomy was more efficient than the basic transfer method, without cost to long-term retention or generalization of knowledge to recognizing new images (Visible Human and MRI). Copyright © 2012 American Association of Anatomists.

Computer-Based Learning: Interleaving Whole and Sectional Representation of Neuroanatomy

PubMed Central

Pani, John R.; Chariker, Julia H.; Naaz, Farah

2015-01-01

The large volume of material to be learned in biomedical disciplines requires optimizing the efficiency of instruction. In prior work with computer-based instruction of neuroanatomy, it was relatively efficient for learners to master whole anatomy and then transfer to learning sectional anatomy. It may, however, be more efficient to continuously integrate learning of whole and sectional anatomy. A study of computer-based learning of neuroanatomy was conducted to compare a basic transfer paradigm for learning whole and sectional neuroanatomy with a method in which the two forms of representation were interleaved (alternated). For all experimental groups, interactive computer programs supported an approach to instruction called adaptive exploration. Each learning trial consisted of time-limited exploration of neuroanatomy, self-timed testing, and graphical feedback. The primary result of this study was that interleaved learning of whole and sectional neuroanatomy was more efficient than the basic transfer method, without cost to long-term retention or generalization of knowledge to recognizing new images (Visible Human and MRI). PMID:22761001

Benefits, safety, and prescription of exercise in persons with multiple sclerosis.

PubMed

Motl, Robert W

2014-12-01

Exercise represents a behavioral approach for the restoration of function and management of symptoms among persons with multiple sclerosis (MS). The current paper provides a review on the topic of exercise in MS and is separated into four sections. The first section defines exercise and related constructs. The second section summarizes evidence for the benefits of exercise in MS based on literature reviews and meta-analyses. The third section focuses on the safety of exercise in MS based on the reporting of relapses and other adverse events, and the last section describes guidelines for exercise. The paper concludes with a discussion of major limitations with the existing body of research and highlights some of the pressing areas for future research on exercise in MS.

Influence of sectioning location on age estimates from common carp dorsal spines

USGS Publications Warehouse

Watkins, Carson J.; Klein, Zachary B.; Terrazas, Marc M.; Quist, Michael C.

2015-01-01

Dorsal spines have been shown to provide precise age estimates for Common CarpCyprinus carpio and are commonly used by management agencies to gain information on Common Carp populations. However, no previous studies have evaluated variation in the precision of age estimates obtained from different sectioning locations along Common Carp dorsal spines. We evaluated the precision, relative readability, and distribution of age estimates obtained from various sectioning locations along Common Carp dorsal spines. Dorsal spines from 192 Common Carp were sectioned at the base (section 1), immediately distal to the basal section (section 2), and at 25% (section 3), 50% (section 4), and 75% (section 5) of the total length of the dorsal spine. The exact agreement and within-1-year agreement among readers was highest and the coefficient of variation lowest for section 2. In general, age estimates derived from sections 2 and 3 had similar age distributions and displayed the highest concordance in age estimates with section 1. Our results indicate that sections taken at ≤ 25% of the total length of the dorsal spine can be easily interpreted and provide precise estimates of Common Carp age. The greater consistency in age estimates obtained from section 2 indicates that by using a standard sectioning location, fisheries scientists can expect age-based estimates of population metrics to be more comparable and thus more useful for understanding Common Carp population dynamics.

A Physics-Based Engineering Approach to Predict the Cross Section for Advanced SRAMs

NASA Astrophysics Data System (ADS)

Li, Lei; Zhou, Wanting; Liu, Huihua

2012-12-01

This paper presents a physics-based engineering approach to estimate the heavy ion induced upset cross section for 6T SRAM cells from layout and technology parameters. The new approach calculates the effects of radiation with junction photocurrent, which is derived based on device physics. The new and simple approach handles the problem by using simple SPICE simulations. At first, the approach uses a standard SPICE program on a typical PC to predict the SPICE-simulated curve of the collected charge vs. its affected distance from the drain-body junction with the derived junction photocurrent. And then, the SPICE-simulated curve is used to calculate the heavy ion induced upset cross section with a simple model, which considers that the SEU cross section of a SRAM cell is more related to a “radius of influence” around a heavy ion strike than to the physical size of a diffusion node in the layout for advanced SRAMs in nano-scale process technologies. The calculated upset cross section based on this method is in good agreement with the test results for 6T SRAM cells processed using 90 nm process technology.

14 CFR Section 04 - Air Carrier Groupings

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Air Carrier Groupings Section 04 Section 04... REGULATIONS UNIFORM SYSTEM OF ACCOUNTS AND REPORTS FOR LARGE CERTIFICATED AIR CARRIERS Section 04 Air Carrier Groupings (a) All large certificated air carriers are placed into three basic air carrier groupings based...

14 CFR Section 04 - Air Carrier Groupings

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Air Carrier Groupings Section 04 Section 04... REGULATIONS UNIFORM SYSTEM OF ACCOUNTS AND REPORTS FOR LARGE CERTIFICATED AIR CARRIERS Section 04 Air Carrier Groupings (a) All large certificated air carriers are placed into three basic air carrier groupings based...

14 CFR Section 04 - Air Carrier Groupings

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Air Carrier Groupings Section 04 Section 04... REGULATIONS UNIFORM SYSTEM OF ACCOUNTS AND REPORTS FOR LARGE CERTIFICATED AIR CARRIERS Section 04 Air Carrier Groupings (a) All large certificated air carriers are placed into three basic air carrier groupings based...

14 CFR Section 04 - Air Carrier Groupings

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Air Carrier Groupings Section 04 Section 04... REGULATIONS UNIFORM SYSTEM OF ACCOUNTS AND REPORTS FOR LARGE CERTIFICATED AIR CARRIERS Section 04 Air Carrier Groupings (a) All large certificated air carriers are placed into three basic air carrier groupings based...

Examining the DSM-5 alternative personality disorder model operationalization of antisocial personality disorder and psychopathy in a male correctional sample.

PubMed

Wygant, Dustin B; Sellbom, Martin; Sleep, Chelsea E; Wall, Tina D; Applegate, Kathryn C; Krueger, Robert F; Patrick, Christopher J

2016-07-01

For decades, it has been known that the Diagnostic and Statistical Manual of Mental Disorders (DSM) diagnosis of Antisocial Personality Disorder (ASPD) is a nonadequate operationalization of psychopathy (Crego & Widiger, 2015). The DSM-5 alternative model of personality disorders provides an opportunity to rectify some of these long held concerns. The current study compared the Section III alternative model's trait-based conception of ASPD with the categorical model from the main diagnostic codes section of DSM-5 in terms of associations with differing models of psychopathy. We also evaluated the validity of the trait-based conception more broadly in relation to measures of antisocial tendencies as well as psychopathy. Participants were 200 male inmates who were administered a battery of self-report and interview-based researcher rating measures of relevant constructs. Analyses showed that Section III ASPD outperformed Section II ASPD in predicting scores on Hare's (2003) Psychopathy Checklist-Revised (PCL-R; r = .88 vs. .59). Additionally, aggregate scores for Section III ASPD performed well in capturing variance in differing ASPD and psychopathy measures. Finally, we found that the Section III ASPD impairment criteria added incrementally to the Section III ASPD traits in predicting PCL-R psychopathy and SCID-II ASPD. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Learning-Based Curriculum Development

ERIC Educational Resources Information Center

Nygaard, Claus; Hojlt, Thomas; Hermansen, Mads

2008-01-01

This article is written to inspire curriculum developers to centre their efforts on the learning processes of students. It presents a learning-based paradigm for higher education and demonstrates the close relationship between curriculum development and students' learning processes. The article has three sections: Section "The role of higher…

University-Based Research Centers: Characteristics, Organization, and Administrative Implications

ERIC Educational Resources Information Center

Sa, Creso M.

2008-01-01

This paper examines the characteristics and organizational issues associated with university-based research centers. The first section sketches general characteristics and functions of centers. The second section examines major issues concerning the organization of centers, including funding and sustainability, center autonomy, and relations with…

Pu239 Cross-Section Variations Based on Experimental Uncertainties and Covariances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sigeti, David Edward; Williams, Brian J.; Parsons, D. Kent

2016-10-18

Algorithms and software have been developed for producing variations in plutonium-239 neutron cross sections based on experimental uncertainties and covariances. The varied cross-section sets may be produced as random samples from the multi-variate normal distribution defined by an experimental mean vector and covariance matrix, or they may be produced as Latin-Hypercube/Orthogonal-Array samples (based on the same means and covariances) for use in parametrized studies. The variations obey two classes of constraints that are obligatory for cross-section sets and which put related constraints on the mean vector and covariance matrix that detemine the sampling. Because the experimental means and covariances domore » not obey some of these constraints to sufficient precision, imposing the constraints requires modifying the experimental mean vector and covariance matrix. Modification is done with an algorithm based on linear algebra that minimizes changes to the means and covariances while insuring that the operations that impose the different constraints do not conflict with each other.« less

Molecular Data for a Biochemical Model of DNA Radiation Damage: Electron Impact Ionization and Dissociative Ionization of DNA Bases and Sugar-Phosphate Backbone

NASA Technical Reports Server (NTRS)

Dateo, Christopher E.; Fletcher, Graham D.

2004-01-01

As part of the database for building up a biochemical model of DNA radiation damage, electron impact ionization cross sections of sugar-phosphate backbone and DNA bases have been calculated using the improved binary-encounter dipole (iBED) model. It is found that the total ionization cross sections of C3'- and C5'-deoxyribose-phospate, two conformers of the sugar-phosphate backbone, are close to each other. Furthermore, the sum of the ionization cross sections of the separate deoxyribose and phosphate fragments is in close agreement with the C3'- and C5'-deoxyribose-phospate cross sections, differing by less than 10%. Of the four DNA bases, the ionization cross section of guanine is the largest, then in decreasing order, adenine, thymine, and cytosine. The order is in accordance with the known propensity of oxidation of the bases by ionizing radiation. Dissociative ionization (DI), a process that both ionizes and dissociates a molecule, is investigated for cytosine. The DI cross section for the formation of H and (cytosine-Hl)(+), with the cytosine ion losing H at the 1 position, is also reported. The threshold of this process is calculated to be 17.1 eV. Detailed analysis of ionization products such as in DI is important to trace the sequential steps in the biochemical process of DNA damage.

Deep Downhole Seismic Testing at the Waste Treatment Plant Site, Hanford, WA. Volume IV S-Wave Measurements in Borehole C4993 Seismic Records, Wave-Arrival Identifications and Interpreted S-Wave Velocity Profile.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stokoe, Kenneth H.; Li, Song Cheng; Cox, Brady R.

2007-06-06

In this volume (IV), all S-wave measurements are presented that were performed in Borehole C4993 at the Waste Treatment Plant (WTP) with T-Rex as the seismic source and the Lawrence Berkeley National Laboratory (LBNL) 3-D wireline geophone as the at-depth borehole receiver. S-wave measurements were performed over the depth range of 370 to 1300 ft, typically in 10-ft intervals. However, in some interbeds, 5-ft depth intervals were used, while below about 1200 ft, depth intervals of 20 ft were used. Shear (S) waves were generated by moving the base plate of T-Rex for a given number of cycles at amore » fixed frequency as discussed in Section 2. This process was repeated so that signal averaging in the time domain was performed using 3 to about 15 averages, with 5 averages typically used. In addition, a second average shear wave record was recorded by reversing the polarity of the motion of the T-Rex base plate. In this sense, all the signals recorded in the field were averaged signals. In all cases, the base plate was moving perpendicular to a radial line between the base plate and the borehole which is in and out of the plane of the figure shown in Figure 1.1. The definition of “in-line”, “cross-line”, “forward”, and “reversed” directions in items 2 and 3 of Section 2 was based on the moving direction of the base plate. In addition to the LBNL 3-D geophone, called the lower receiver herein, a 3-D geophone from Redpath Geophysics was fixed at a depth of 22 ft in Borehole C4993, and a 3-D geophone from the University of Texas (UT) was embedded near the borehole at about 1.5 ft below the ground surface. The Redpath geophone and the UT geophone were properly aligned so that one of the horizontal components in each geophone was aligned with the direction of horizontal shaking of the T-Rex base plate. This volume is organized into 12 sections as follows. Section 1: Introduction, Section 2: Explanation of Terminology, Section 3: Vs Profile at Borehole C4993, Sections 4 to 6: Unfiltered S-wave records of lower horizontal receiver, reaction mass, and reference receiver, respectively, Sections 7 to 9: Filtered S-wave signals of lower horizontal receiver, reaction mass and reference receiver, respectively, Section 10: Expanded and filtered S-wave signals of lower horizontal receiver, and Sections 11 and 12: Waterfall plots of unfiltered and filtered lower horizontal receiver signals, respectively.« less

Interpretive geologic cross sections for the Death Valley regional flow system and surrounding areas, Nevada and California

USGS Publications Warehouse

Sweetkind, D.S.; Dickerson, R.P.; Blakely, R.J.; Denning, Paul

2001-01-01

This report presents a network of 28 geologic cross sections that portray subsurface geologic relations within the Death Valley regional ground-water system, a ground-water basin that encompasses a 3? x 3? area (approximately 70,000 km2) in southern Nevada and eastern California. The cross sections transect that part of the southern Great Basin that includes Death Valley, the Nevada Test Site, and the potential high-level nuclear waste underground repository at Yucca Mountain. The specific geometric relationships portrayed on the cross sections are discussed in the context of four general sub-regions that have stratigraphic similarities and general consistency of structural style: (1) the Nevada Test Site vicinity; (2) the Spring Mountains, Pahrump Valley and Amargosa Desert region; (3) the Death Valley region; and (4) the area east of the Nevada Test Site. The subsurface geologic interpretations portrayed on the cross sections are based on an integration of existing geologic maps, measured stratigraphic sections, published cross sections, well data, and geophysical data and interpretations. The estimated top of pre-Cenozoic rocks in the cross sections is based on inversion of gravity data, but the deeper parts of the sections are based on geologic conceptual models and are more speculative. The region transected by the cross sections includes part of the southern Basin and Range Province, the northwest-trending Walker Lane belt, the Death Valley region, and the northern Mojave Desert. The region is structurally complex, where a locally thick Tertiary volcanic and sedimentary section unconformably overlies previously deformed Proterozoic through Paleozoic rocks. All of these rocks have been deformed by complex Neogene ex-tensional normal and strike-slip faults. These cross sections form a three-dimensional network that portrays the interpreted stratigraphic and structural relations in the region; the sections form part of the geologic framework that will be incorporated in a complex numerical model of ground-water flow in the Death Valley region.

Preliminary Magnetostratigraphic Study of the Split Mountain and Lower Imperial Groups, Split Mountain Gorge, Western Salton Trough, CA

NASA Astrophysics Data System (ADS)

Fluette, A. L.; Housen, B. A.; Dorsey, R. J.

2004-12-01

We present preliminary results of a magnetostratigraphic study of Miocene-Pliocene sedimentary rocks of the Split Mt. and lower Imperial Groups exposed in Split Mt. Gorge and eastern Fish Creek-Vallecito basin, western Salton Trough. Precise age control for the base of this thick section is needed to improve our understanding of the early history of extension-related subsidence in this region. The geologic setting and stratigraphic framework are known from previous work by Dibblee (1954, 1996), Woodard (1963), Kerr (1982), Winker (1987), Kerr and Kidwell (1991), Winker and Kidwell (1986; 1996), and others. We have analyzed Upper Miocene to lower Pliocene strata exposed in a conformable section in Split Mt. Gorge, including (in order from the base; nomenclature of Winker and Kidwell, 1996): (1) Split Mt. Group: Red Rock Fm alluvial sandstone; Elephant Trees alluvial conglomerate; and lower megabreccia unit; and (2) lower part of Imperial Group, including: Fish Creek Gypsum; proximal to distal turbidites of the Latrania Fm and Wind Caves Mbr of Deguynos Fm; upper megabreccia unit; marine mudstone and rhythmites of the Mud Hills Mbr (Deguynos Fm); and the basal part of the Yuha Mbr (Deguynos Fm). Measured thickness from the base of the Elephant Trees Cgl to the base of the Yuha Mbr is about 1050 m, consistent with previous measurements of Winker (1987). Paleomagnetic samples were collected at approximately 10 m intervals throughout this section. The upper portion of our sampled section overlaps with the lower part of the section sampled for magnetostratigraphic study by Opdyke et al. (1977) and Johnson et al. (1983). They interpreted the base of their section to be about 4.3 Ma, and calculated an average sedimentation rate of approximately 5.5 mm/yr for the lower part of their section. Good-quality preliminary results from 15 paleomagnetic sites distributed throughout our sampled section permit preliminary identification of 6 polarity zones. Based on regional mapping and stratigraphic correlations (Winker and Kidwell, 1996) and extrapolation of the Johnson et al. (1983) sedimentation rates, we tentatively correlate two normal-polarity intervals in the lower part of our section to Chrons C3An.1n and C3An.2n of the geomagnetic polarity time scale of Cande and Kent (1995). If correct, this result would suggest that the lowest reversed-polarity portion of the Red Rock Fm near the base of the section should be correlated to Chron C3Ar.2r, and would be between 6.57 and 6.94 Ma in age. An alternative, but less likely, correlation for the reverse-polarity interval at the base of the section would be with Chron C2Br (7.09-7.43 Ma). This has significant implications for the timing of earliest extension-related basin formation in the western Salton Trough, and potentially raises new questions about the relationship of the Red Rock and Elephant Trees Formations to the Alverson Volcanics (22-14 Ma; Ruisaard, 1979; Kerr, 1982). These preliminary results will be tested and refined with a complete analysis of the remaining samples.

Utility of additional tissue sections in dermatopathology: diagnostic, clinical and financial implications.

PubMed

Stuart, Lauren N; Rodriguez, Adrianna S; Gardner, Jerad M; Foster, Toby E; MacKelfresh, Jamie; Parker, Douglas C; Chen, Suephy C; Stoff, Benjamin K

2014-02-01

As histopathologic assessment is subject to sampling error, some institutions 'preorder' deeper sections on some or all cases (hereafter referred to as prospective deeper sections), while others order additional sections only when needed (hereafter referred to as retrospective deeper sections). We investigated how often additional sections changed a diagnosis and/or clinical management. Given the recent decrease in reimbursement for CPT-code 88305, we also considered the financial implications of ordering additional sections. Cases (n = 204) were assigned a preliminary diagnosis, based on review of the initial slide, and a final diagnosis, after reviewing additional sections. Cases with discordant diagnoses were assessed by two dermatologists, who indicated whether the change in diagnosis altered clinical management. Expenses were estimated for three scenarios: (a) no additional sections, (b) prospective deeper sections and (c) retrospective deeper sections. Diagnoses were modified in 9% of cases, which changed clinical management in 56% of these cases. Lesions obtained by punch-biopsy and inflammatory lesions were disproportionately overrepresented amongst cases with changed diagnoses (p < 0.001, p = 0.12, respectively). The cost of prospective deeper sections and retrospective deeper sections represented a 56% and 115% increase over base costs, respectively. Labor costs, particularly the cost of dermatopathologist evaluation, were the most significant cost-drivers. While additional sections improve diagnostic accuracy, they delay turn-around-time and increase expenditures. In our practice, prospective deeper sections are cost effective, however, this may vary by institution. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Competency-Based Adult Education Research and Innovation Catalog.

ERIC Educational Resources Information Center

Bureau of Occupational and Adult Education (DHEW/OE), Washington, DC. Div. of Adult Education.

This document contains abstracts describing competency-based programs related to the Adult Performance Level (APL) project and adult education. The catalog is divided into two sections: state program implementation and local program implementation. The first section describes programs and research projects currently active in Alabama, California,…

Information and Communication Technology (ICT) Standards and Guidelines. Final rule.

PubMed

2017-01-18

We, the Architectural and Transportation Barriers Compliance Board (Access Board or Board), are revising and updating, in a single rulemaking, our standards for electronic and information technology developed, procured, maintained, or used by Federal agencies covered by section 508 of the Rehabilitation Act of 1973, as well as our guidelines for telecommunications equipment and customer premises equipment covered by Section 255 of the Communications Act of 1934. The revisions and updates to the section 508-based standards and section 255-based guidelines are intended to ensure that information and communication technology covered by the respective statutes is accessible to and usable by individuals with disabilities.

Cellular-automata-based learning network for pattern recognition

NASA Astrophysics Data System (ADS)

Tzionas, Panagiotis G.; Tsalides, Phillippos G.; Thanailakis, Adonios

1991-11-01

Most classification techniques either adopt an approach based directly on the statistical characteristics of the pattern classes involved, or they transform the patterns in a feature space and try to separate the point clusters in this space. An alternative approach based on memory networks has been presented, its novelty being that it can be implemented in parallel and it utilizes direct features of the patterns rather than statistical characteristics. This study presents a new approach for pattern classification using pseudo 2-D binary cellular automata (CA). This approach resembles the memory network classifier in the sense that it is based on an adaptive knowledge based formed during a training phase, and also in the fact that both methods utilize pattern features that are directly available. The main advantage of this approach is that the sensitivity of the pattern classifier can be controlled. The proposed pattern classifier has been designed using 1.5 micrometers design rules for an N-well CMOS process. Layout has been achieved using SOLO 1400. Binary pseudo 2-D hybrid additive CA (HACA) is described in the second section of this paper. The third section describes the operation of the pattern classifier and the fourth section presents some possible applications. The VLSI implementation of the pattern classifier is presented in the fifth section and, finally, the sixth section draws conclusions from the results obtained.

Proposed stratotype for the base of the highest Cambrian stage at the first appearance datum of Cordylodus andresi, Lawson Cove section, Utah, USA

USGS Publications Warehouse

Miller, J.F.; Ethington, Raymond L.; Evans, K.R.; Holmer, L.E.; Loch, James D.; Popov, L.E.; Repetski, J.E.; Ripperdan, R.L.; Taylor, John F.

2006-01-01

We propose a candidate for the Global Standard Stratotype-section and Point (GSSP) for the base of the highest stage of the Furongian Series of the Cambrian System. The section is at Lawson Cove in the Ibex area of Millard County, Utah, USA. The marker horizon is the first appearance datum (FAD) of the conodont Cordylodus andresi Viira et Sergeyeva in Kaljo et al. [Kaljo, D., Borovko, N., Heinsalu, H., Khazanovich, K., Mens, K., Popov, L., Sergeyeva, S., Sobolevskaya, R., Viira, V., 1986. The Cambrian-Ordovician boundary in the Baltic-Ladoga clint area (North Estonia and Leningrad Region, USSR). Eesti NSV Teaduste Akadeemia Toimetised. Geologia 35, 97-108]. At this section and elsewhere this horizon also is the FAD of the trilobite Eurekia apopsis (Winston et Nicholls, 1967). This conodont characterizes the base of the Cordylodus proavus Zone, which has been recognized in many parts of the world. This trilobite characterizes the base of the Eurekia apopsis Zone, which has been recognized in many parts of North America. The proposed boundary is 46.7 m above the base of the Lava Dam Member of the Notch Peak Formation at the Lawson Cove section. Brachiopods, sequence stratigraphy, and carbon-isotope geochemistry are other tools that characterize this horizon and allow it to be recognized in other areas. ?? 2006 Nanjing Institute of Geology and Palaeontology, CAS.

Geometric Analysis of Wing Sections

DOT National Transportation Integrated Search

1995-04-01

This paper describes a new geometric analysis procedure for wing sections. This procedure is based on the normal mode analysis for continuous functions. A set of special shape functions is introduced to represent the geometry of the wing section. The...

40 CFR 52.2299 - Original identification of plan section.

Code of Federal Regulations, 2010 CFR

2010-07-01

... high pour point crude oil) and Regulation V (i.e., sections 115.101-106, section 115.191 (9) and (10.... Based on the availability of enhanced emissions and monitoring data, as well as more sophisticated...

OVERALL VIEW OF CEMETERY SECTIONS SOUTH OF CENTRAL DRIVE, SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

OVERALL VIEW OF CEMETERY SECTIONS SOUTH OF CENTRAL DRIVE, SHOWING SECTION MARKER AT BASE OF TREE. VIEW TO SOUTH. - Baton Rouge National Cemetery, 220 North 19th Street, Baton Rouge, East Baton Rouge Parish, LA

An inventory of four-dimensional data sets for the earth sciences

NASA Technical Reports Server (NTRS)

Gregory, Terri

1989-01-01

The wide variety of data available to the diligent researcher and the myriad paths to obtaining it are emphasized. This inventory is an attempt to make accessible much of the four-dimensional data available in the world. In this quick-look catalog are listed separate data sets (Data Sets sections), sources of data including centers and large data bases (Sources section), and some data expected to be available in the future (Future Data section). In the Data Sets section, individual data sets are arranged alphabetically by institution, with those archived in the U.S.A. listed first, followed by those found elsewhere. The Sources section includes large data bases, centers, and directories. Sources are arranged alphabetically by country. This section is followed by a Future Data section which is a collection of data sets, experiments, and other future developments of which we are cognizant. A collection of further information and order blanks provided by some of the archiving institutions are presented in the appendix.

Chemical amplification based on fluid partitioning

DOEpatents

Anderson, Brian L [Lodi, CA; Colston, Jr., Billy W.; Elkin, Chris [San Ramon, CA

2006-05-09

A system for nucleic acid amplification of a sample comprises partitioning the sample into partitioned sections and performing PCR on the partitioned sections of the sample. Another embodiment of the invention provides a system for nucleic acid amplification and detection of a sample comprising partitioning the sample into partitioned sections, performing PCR on the partitioned sections of the sample, and detecting and analyzing the partitioned sections of the sample.

Prevalence of and risk factors associated with cesarean section in Lebanon - A retrospective study based on a sample of 29,270 women.

PubMed

Zgheib, Sandy M; Kacim, Mohammad; Kostev, Karel

2017-12-01

During the last decades, there has been an alarming and dramatic increase in the number of cesarean births in both developed and undeveloped countries. This increase has not been clinically justified but, nevertheless, has raised an important number of issues. The aim of this study was to determine the risk factors associated with the high cesarean section rates in Lebanon. This study is based on a sample of 29,270 Lebanese women who were pregnant between 2000 and 2015. Among these, 14,327 gave birth by cesarean section and 14,943 gave birth vaginally. To identify the risk factors of cesarean section, logistic regression was applied as a statistical method using the SPSS statistical package. Of the 29,270 pregnant women included in the study, 49% had cesarean sections while 51% gave birth vaginally. Repeat cesarean section accounted for 23% while vaginal birth after cesarean accounted for only 0.2% of deliveries. In addition, weekdays were associated with a preference of providers to carry out more cesarean sections. According to an analysis of our data using logistic regression, the risk factors associated with the increase in cesarean section rates were advanced maternal age, elective cesarean section, malpresentation of fetus, multiple birth, prolonged pregnancy, prolonged labor, and fetal distress. Based on these results, it is recommended that a new health policy be implemented to reduce the number of unnecessary cesarean deliveries in Lebanon. Copyright © 2017 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

Welding Technology. A Competency Based Articulated Curriculum.

ERIC Educational Resources Information Center

Rosenbalm, Charles; And Others

This document is a competency-based curriculum guide designed to promote articulation in welding technology programs between and among secondary and postsecondary institutions in the Indian Hills Community College and Merged Area XV high schools in Iowa. The guide is organized in eight sections. The first six sections provide background…

40 CFR 268.42 - Treatment standards expressed as specified technologies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... specified technologies. 268.42 Section 268.42 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... standards expressed as specified technologies. Note: For the requirements previously found in this section in Table 2—Technology-Based Standards By RCRA Waste Code, and Table 3—Technology-Based Standards for...

Publications about Products - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation › Publications about Products USNO Logo USNO Navigation Earth Orientation Products GPS-based Products VLBI-based Products EO Information Center

VLBI-based Products - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You terrestrial reference frames and to predict the variable orientation of the Earth in three-dimensional space antennas that define a VLBI-based Terrestrial Reference Frame (TRF) and the Earth Orientation Parameters

An Educational Master Plan for Austin Community College.

ERIC Educational Resources Information Center

Colvert, C. C.

This seven-part report suggests a master plan for Austin Community College (ACC) through 1988-89 based on projections of enrollments, finances, and facility requirements. Section I details enrollment projections based on the proportional relationship between Travis County high school graduates and ACC enrollees. In addition, this section reviews…

Phylogenetic relationships of species of genus Arachis based on geneic sequences

USDA-ARS?s Scientific Manuscript database

The genus Arachis (Fabaceae), which originated in South America, consists of 80 species. Based on morphological traits and cross-compatibility among the species, the genus is divided into nine taxonomic sections, one of which, Arachis is the largest section including 30 wild species and the economic...

Golden Section Relations in Interpersonal Judgment

ERIC Educational Resources Information Center

Benjafield, John; Green, T. R. G.

1978-01-01

A model of the organization of interpersonal judgments, based on the hypothesis that people tend to organize their judgments in Golden Section ratios, was presented. A theory of the process of interpersonal judgment, based on the notion that people judge acquaintances using a Fibonacci-like decision rule, was then developed. A computer simulation…

TSCA Section 21 Petition Requesting EPA to Lower Lead Dust Hazard Standards and Modify the Definition of Lead-based Paint in its Regulations

EPA Pesticide Factsheets

This petition requests EPA to lower lead dust hazard standards and modify the definition of lead-based paint in its regulations promulgated under sections 401 and 403 of the Toxic Substances Control Act (TSCA).

Machine Trades. A Competency Based Articulated Curriculum.

ERIC Educational Resources Information Center

Mein, Jake; And Others

This document is a competency-based curriculum guide designed to promote articulation in machine trades vocational education programs between and among secondary and postsecondary institutions in the Indian Hills Community College and Merged Area XV high schools in Iowa. The guide is organized in 11 sections. The first six sections provide…

40 CFR 268.42 - Treatment standards expressed as specified technologies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... specified technologies. 268.42 Section 268.42 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... standards expressed as specified technologies. Note: For the requirements previously found in this section in Table 2—Technology-Based Standards By RCRA Waste Code, and Table 3—Technology-Based Standards for...

Saddle clamp assembly

NASA Technical Reports Server (NTRS)

Belrose, Charles R. (Inventor)

1994-01-01

A saddle clamp assembly is presented. The assembly is comprised of a hollow cylindrical body centered about a longitudinal axis and being diametrically split into semicircular top and bottom sections. Each section has a pair of connection flanges, at opposite ends, that project radially outward. A pair of bolts are retained on the top section flanges and are threadable into nuts retained on the bottom section flanges. A base member is anchored to a central underside portion of the bottom clamp body section and has a pair of connection tabs positioned beneath the bottom clamp body section connection flanges on opposite sides of the clamp axis. A pair of bolts are retained on the base member connection tabs and are threadable into a pair of nuts retainable on a support structure. The connection tab and connection flanges on each side of the clamp body are axially offset in a manner permitting downward installation/removable tool access to the lower bolts past the connection flanges. An elongated retention tether is used to connect the top clamp body section to the balance of the clamp assembly. This prevents loss of the top clamp body section when it is removed from the bottom clamp body section.

Orbital transfer vehicle concept definition and system analysis study, 1985. Volume 2: OTV concept definition and evaluation. Book 4: Operations

NASA Technical Reports Server (NTRS)

Mitchell, Jack C.; Keeley, J. T.

1985-01-01

The benefits of the reusable Space Shuttle and the advent of the new Space Station hold promise for increasingly effective utilization of space by the scientific and commercial as well as military communities. A high energy reusable oribital transfer vehicle (OTV) represents an additional capability which also exhibits potential for enhancing space access by allowing more ambitious missions and at the same time reducing launch costs when compared to existing upper stages. This section, Vol. 2: Book 4, covers launch operations and flight operations. The launch operations section covers analyses of ground based and space based vehicles, launch site facilities, logistics requirements, propellant loading, space based maintenance and aft cargo carrier access options. The flight operations sections contain summary descriptions of ground based and space based OTV missions, operations and support requirements, and a discussion of fleet implications.

The Galileo PPS expert monitoring and diagnostic prototype

NASA Technical Reports Server (NTRS)

Bahrami, Khosrow

1989-01-01

The Galileo PPS Expert Monitoring Module (EMM) is a prototype system implemented on the SUN workstation that will demonstrate a knowledge-based approach to monitoring and diagnosis for the Galileo spacecraft Power/Pyro subsystems. The prototype will simulate an analysis module functioning within the SFOC Engineering Analysis Subsystem Environment (EASE). This document describes the implementation of a prototype EMM for the Galileo spacecraft Power Pyro Subsystem. Section 2 of this document provides an overview of the issues in monitoring and diagnosis and comparison between traditional and knowledge-based solutions to this problem. Section 3 describes various tradeoffs which must be considered when designing a knowledge-based approach to monitoring and diagnosis, and section 4 discusses how these issues were resolved in constructing the prototype. Section 5 presents conclusions and recommendations for constructing a full-scale demonstration of the EMM. A Glossary provides definitions of terms used in this text.

Subpixel based defocused points removal in photon-limited volumetric dataset

NASA Astrophysics Data System (ADS)

Muniraj, Inbarasan; Guo, Changliang; Malallah, Ra'ed; Maraka, Harsha Vardhan R.; Ryle, James P.; Sheridan, John T.

2017-03-01

The asymptotic property of the maximum likelihood estimator (MLE) has been utilized to reconstruct three-dimensional (3D) sectional images in the photon counting imaging (PCI) regime. At first, multiple 2D intensity images, known as Elemental images (EI), are captured. Then the geometric ray-tracing method is employed to reconstruct the 3D sectional images at various depth cues. We note that a 3D sectional image consists of both focused and defocused regions, depending on the reconstructed depth position. The defocused portion is redundant and should be removed in order to facilitate image analysis e.g., 3D object tracking, recognition, classification and navigation. In this paper, we present a subpixel level three-step based technique (i.e. involving adaptive thresholding, boundary detection and entropy based segmentation) to discard the defocused sparse-samples from the reconstructed photon-limited 3D sectional images. Simulation results are presented demonstrating the feasibility and efficiency of the proposed method.

Child Pedestrian Injury: A Review of Behavioral Risks and Preventive Strategies

PubMed Central

Schwebel, David C.; Davis, Aaron L.; O’Neal, Elizabeth E.

2011-01-01

Pedestrian injury is among the leading causes of pediatric death in the United States and much of the world. This paper is divided into two sections. First, we review the literature on behavioral risk factors for child injury. Cognitive and perceptual development risks are discussed. The roles of distraction, temperament and personality, and social influences from parents and peers are presented. We conclude the first section with brief reviews of environmental risks, pedestrian safety among special populations, and the role of sleep and fatigue on pediatric pedestrian safety. The second section of the review considers child pedestrian injury prevention strategies. Categorized by mode of presentation, we discuss parent instruction strategies, school-based instruction strategies (including crossing guards), and streetside training techniques. Technology-based training strategies using video, internet, and virtual reality are reviewed. We conclude the section on prevention with discussion of community-based interventions. PMID:23066380

Establishment of a Photon Data Section of the BNL National Nuclear Data Center: A preliminary proposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanson, A.L.; Pearlstein, S.

1992-05-01

It is proposed to establish a Photon Data Section (PDS) of the BNL National Nuclear Data Center (NNDC). This would be a total program encompassing both photon-atom and photon-nucleus interactions. By utilizing the existing NNDC data base management expertise and on-line access capabilities, the implementation of photon interaction data activities within the existing NNDC nuclear structure and nuclear-reaction activities can reestablish a viable photon interaction data program at minimum cost. By taking advantage of the on-line capabilities, the x-ray users' community will have access to a dynamic, state-of-the-art data base of interaction information. The proposed information base would include datamore » that presently are scattered throughout the literature usually in tabulated form. It is expected that the data bases would include at least the most precise data available in photoelectric cross sections, atomic form factors and incoherent scattering functions, anomalous scattering factors, oscillator strengths and oscillator densities, fluorescence yields, Auger electron yields, etc. It could also include information not presently available in tabulations or in existing data bases such as EXAFS (extended x-ray absorption fine structure) reference spectra, chemical bonding induced shifts in the photoelectric absorption edge, matrix corrections, x-ray Raman, and x-ray resonant Raman cross sections. The data base will also include the best estimates of the accuracy of the interaction data as it exists in the data base. It is proposed that the PDS would support computer programs written for calculating scattering cross sections for given solid angles, sample geometries, and polarization of incident x-rays, for calculating Compton profiles, and for analyzing data as in EXAFS and x-ray fluorescence.« less

Establishment of a Photon Data Section of the BNL National Nuclear Data Center: A preliminary proposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanson, A.L.; Pearlstein, S.

1992-05-01

It is proposed to establish a Photon Data Section (PDS) of the BNL National Nuclear Data Center (NNDC). This would be a total program encompassing both photon-atom and photon-nucleus interactions. By utilizing the existing NNDC data base management expertise and on-line access capabilities, the implementation of photon interaction data activities within the existing NNDC nuclear structure and nuclear-reaction activities can reestablish a viable photon interaction data program at minimum cost. By taking advantage of the on-line capabilities, the x-ray users` community will have access to a dynamic, state-of-the-art data base of interaction information. The proposed information base would include datamore » that presently are scattered throughout the literature usually in tabulated form. It is expected that the data bases would include at least the most precise data available in photoelectric cross sections, atomic form factors and incoherent scattering functions, anomalous scattering factors, oscillator strengths and oscillator densities, fluorescence yields, Auger electron yields, etc. It could also include information not presently available in tabulations or in existing data bases such as EXAFS (extended x-ray absorption fine structure) reference spectra, chemical bonding induced shifts in the photoelectric absorption edge, matrix corrections, x-ray Raman, and x-ray resonant Raman cross sections. The data base will also include the best estimates of the accuracy of the interaction data as it exists in the data base. It is proposed that the PDS would support computer programs written for calculating scattering cross sections for given solid angles, sample geometries, and polarization of incident x-rays, for calculating Compton profiles, and for analyzing data as in EXAFS and x-ray fluorescence.« less

Chemical amplification based on fluid partitioning in an immiscible liquid

DOEpatents

Anderson, Brian L.; Colston, Bill W.; Elkin, Christopher J.

2010-09-28

A system for nucleic acid amplification of a sample comprises partitioning the sample into partitioned sections and performing PCR on the partitioned sections of the sample. Another embodiment of the invention provides a system for nucleic acid amplification and detection of a sample comprising partitioning the sample into partitioned sections, performing PCR on the partitioned sections of the sample, and detecting and analyzing the partitioned sections of the sample.

A broad-group cross-section library based on ENDF/B-VII.0 for fast neutron dosimetry Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alpan, F.A.

2011-07-01

A new ENDF/B-VII.0-based coupled 44-neutron, 20-gamma-ray-group cross-section library was developed to investigate the latest evaluated nuclear data file (ENDF) ,in comparison to ENDF/B-VI.3 used in BUGLE-96, as well as to generate an objective-specific library. The objectives selected for this work consisted of dosimetry calculations for in-vessel and ex-vessel reactor locations, iron atom displacement calculations for reactor internals and pressure vessel, and {sup 58}Ni(n,{gamma}) calculation that is important for gas generation in the baffle plate. The new library was generated based on the contribution and point-wise cross-section-driven (CPXSD) methodology and was applied to one of the most widely used benchmarks, themore » Oak Ridge National Laboratory Pool Critical Assembly benchmark problem. In addition to the new library, BUGLE-96 and an ENDF/B-VII.0-based coupled 47-neutron, 20-gamma-ray-group cross-section library was generated and used with both SNLRML and IRDF dosimetry cross sections to compute reaction rates. All reaction rates computed by the multigroup libraries are within {+-} 20 % of measurement data and meet the U. S. Nuclear Regulatory Commission acceptance criterion for reactor vessel neutron exposure evaluations specified in Regulatory Guide 1.190. (authors)« less

40 CFR 35.501 - Environmental programs covered by the subpart.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Program Act of 1992, 42 U.S.C. 4368b. (3) Clean Air Act. Air pollution control (section 105). (4) Clean... Substances Control Act. (i) Lead-based paint program (section 404(g)). (ii) Indoor radon grants (section 306...

40 CFR 35.501 - Environmental programs covered by the subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Program Act of 1992, 42 U.S.C. 4368b. (3) Clean Air Act. Air pollution control (section 105). (4) Clean... Substances Control Act. (i) Lead-based paint program (section 404(g)). (ii) Indoor radon grants (section 306...

Tunable arbitrary unitary transformer based on multiple sections of multicore fibers with phase control.

PubMed

Zhou, Junhe; Wu, Jianjie; Hu, Qinsong

2018-02-05

In this paper, we propose a novel tunable unitary transformer, which can achieve arbitrary discrete unitary transforms. The unitary transformer is composed of multiple sections of multi-core fibers with closely aligned coupled cores. Phase shifters are inserted before and after the sections to control the phases of the waves in the cores. A simple algorithm is proposed to find the optimal phase setup for the phase shifters to realize the desired unitary transforms. The proposed device is fiber based and is particularly suitable for the mode division multiplexing systems. A tunable mode MUX/DEMUX for a three-mode fiber is designed based on the proposed structure.

Prolonged labour as indication for emergency caesarean section: a quality assurance analysis by criterion-based audit at two Tanzanian rural hospitals.

PubMed

Maaløe, N; Sorensen, B L; Onesmo, R; Secher, N J; Bygbjerg, I C

2012-04-01

To audit the quality of obstetric management preceding emergency caesarean sections for prolonged labour. A quality assurance analysis of a retrospective criterion-based audit supplemented by in-depth interviews with hospital staff. Two Tanzanian rural mission hospitals. Audit of 144 cases of women undergoing caesarean sections for prolonged labour; in addition, eight staff members were interviewed. Criteria of realistic best practice were established, and the case files were audited and compared with these. Hospital staff were interviewed about what they felt might be the causes for the audit findings. Prevalence of suboptimal management and themes emerging from an analysis of the transcripts. Suboptimal management was identified in most cases. Non-invasive interventions to potentially avoid operative delivery were inadequately used. When deciding on caesarean section, in 26% of the cases labour was not prolonged, and in 16% the membranes were still intact. Of the women with genuine prolonged labour, caesarean sections were performed with a fully dilated cervix in 36% of the cases. Vacuum extraction was not considered. Amongst the hospital staff interviewed, the awareness of evidence-based guidelines was poor. Word of mouth, personal experience, and fear, especially of HIV transmission, influenced management decisions. The lack of use and awareness of evidence-based guidelines led to misinterpretation of clinical signs, fear of simple interventions, and an excessive rate of emergency caesarean sections. © 2012 The Authors BJOG An International Journal of Obstetrics and Gynaecology © 2012 RCOG.

Sparsity-based acoustic inversion in cross-sectional multiscale optoacoustic imaging.

PubMed

Han, Yiyong; Tzoumas, Stratis; Nunes, Antonio; Ntziachristos, Vasilis; Rosenthal, Amir

2015-09-01

With recent advancement in hardware of optoacoustic imaging systems, highly detailed cross-sectional images may be acquired at a single laser shot, thus eliminating motion artifacts. Nonetheless, other sources of artifacts remain due to signal distortion or out-of-plane signals. The purpose of image reconstruction algorithms is to obtain the most accurate images from noisy, distorted projection data. In this paper, the authors use the model-based approach for acoustic inversion, combined with a sparsity-based inversion procedure. Specifically, a cost function is used that includes the L1 norm of the image in sparse representation and a total variation (TV) term. The optimization problem is solved by a numerically efficient implementation of a nonlinear gradient descent algorithm. TV-L1 model-based inversion is tested in the cross section geometry for numerically generated data as well as for in vivo experimental data from an adult mouse. In all cases, model-based TV-L1 inversion showed a better performance over the conventional Tikhonov regularization, TV inversion, and L1 inversion. In the numerical examples, the images reconstructed with TV-L1 inversion were quantitatively more similar to the originating images. In the experimental examples, TV-L1 inversion yielded sharper images and weaker streak artifact. The results herein show that TV-L1 inversion is capable of improving the quality of highly detailed, multiscale optoacoustic images obtained in vivo using cross-sectional imaging systems. As a result of its high fidelity, model-based TV-L1 inversion may be considered as the new standard for image reconstruction in cross-sectional imaging.

Toward improved durability in advanced aircraft engine hot sections

NASA Technical Reports Server (NTRS)

Sokolowski, Daniel E. (Editor)

1989-01-01

The conference on durability improvement methods for advanced aircraft gas turbine hot-section components discussed NASA's Hot Section Technology (HOST) project, advanced high-temperature instrumentation for hot-section research, the development and application of combustor aerothermal models, and the evaluation of a data base and numerical model for turbine heat transfer. Also discussed are structural analysis methods for gas turbine hot section components, fatigue life-prediction modeling for turbine hot section materials, and the service life modeling of thermal barrier coatings for aircraft gas turbine engines.

Competency Based Training. NCVER Research Forum (Adelaide, Australia, November 10, 1999).

ERIC Educational Resources Information Center

National Centre for Vocational Education Research, Leabrook (Australia).

This publication reports on a forum on competency based training (CBT) research in Australia. Section 1 contains biographies of presenters and panel members. Section 2 presents an overview of the research and highlights key findings. Summaries follow of each of the five key projects. "The CBT Decade: Teaching for Flexibility and…

Computer-Based Learning: Interleaving Whole and Sectional Representation of Neuroanatomy

ERIC Educational Resources Information Center

Pani, John R.; Chariker, Julia H.; Naaz, Farah

2013-01-01

The large volume of material to be learned in biomedical disciplines requires optimizing the efficiency of instruction. In prior work with computer-based instruction of neuroanatomy, it was relatively efficient for learners to master whole anatomy and then transfer to learning sectional anatomy. It may, however, be more efficient to continuously…

24 CFR 5.661 - Section 8 project-based assistance programs: Approval for police or other security personnel to...

Code of Federal Regulations, 2010 CFR

2010-04-01

.... (iii) Full disclosure of any family relationship between the owner and any security personnel. For this... with Disabilities: Family Income and Family Payment; Occupancy Requirements for Section 8 Project-Based... 8 families residing in the project. (2) The owner's application must include the following...

Enhancing the Teaching of Introductory Economics with a Team-Based, Multi-Section Competition

ERIC Educational Resources Information Center

Beaudin, Laura; Berdiev, Aziz N.; Kaminaga, Allison Shwachman; Mirmirani, Sam; Tebaldi, Edinaldo

2017-01-01

The authors describe a unique approach to enhancing student learning at the introductory economics level that utilizes a multi-section, team-based competition. The competition is structured to supplement learning throughout the entire introductory course. Student teams are presented with current economic issues, trends, or events, and use economic…

Teach and Reach: An Alternative Guide to Resources for the Classroom.

ERIC Educational Resources Information Center

Barnes, Ellen; And Others

This guide to alternative teaching resources suggests ideas to change the system and self, and it presents new ways of thinking about teaching and learning. A section on programming includes ideas for alternative curricula that are activity based, affective, community based, issue centered, interest centered, and mixed media. A section on…

A Multidisciplinary Process Curriculum in Environmental Education, Grade 2.

ERIC Educational Resources Information Center

Edmonds School District 15, Lynnwood, WA.

This second grade curriculum guide is based on a multidisciplinary approach to environmental education. The guide includes activities, guidelines for field trip planning, and a resource section. The guide deals with the subjects of plants, soil, and litter. Each subject section includes activities based on the physical characteristics, man's use,…

26 CFR 1.954-1 - Foreign base company income.

Code of Federal Regulations, 2010 CFR

2010-04-01

... amount of subpart F income. Thus, for example, items of gross foreign base company income or gross... insurance income because the de minimis test is met are subject to recharacterization under section 952(c). Further, the de minimis and full inclusion tests of paragraph (b) of this section, and the high tax...

26 CFR 1.954-1 - Foreign base company income.

Code of Federal Regulations, 2014 CFR

2014-04-01

... amount of subpart F income. Thus, for example, items of gross foreign base company income or gross... insurance income because the de minimis test is met are subject to recharacterization under section 952(c). Further, the de minimis and full inclusion tests of paragraph (b) of this section, and the high tax...

Leap Second Announcement - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation › Leap Second Announcement USNO Logo USNO Navigation Earth Orientation Products GPS-based Products VLBI-based Products EO Information Center Publications

Earth Orientation - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation USNO Logo USNO Navigation Earth Orientation Products GPS -based Products VLBI-based Products EO Information Center Publications about Products Software Info Earth

8 CFR 204.5 - Petitions for employment-based immigrants.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Petitions for employment-based immigrants. 204.5 Section 204.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS.... A petition to classify an alien under section 203(b)(1), 203(b)(2), or 203(b)(3) of the Act must be...

76 FR 27882 - Requirements for Bicycles

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... be based on a test of each product or upon a reasonable testing program. Section 14(a)(2) of the CPSA requires that certifications for children's products be based on tests conducted by a CPSC-accepted third... laboratory). Under section 14(a)(3) of the CPSA, the requirement to third-party test children's products...

49 CFR 1515.5 - Appeal of Initial Determination of Threat Assessment based on criminal conviction, immigration...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Assessment based on criminal conviction, immigration status, or mental capacity. 1515.5 Section 1515.5... criminal conviction, immigration status, or mental capacity. (a) Scope. This section applies to applicants... the immigration status requirements as described in 49 CFR 1572.105. (3) TSA has determined that an...

Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control

NASA Astrophysics Data System (ADS)

Acharya, Ranadip; Das, Suman

2015-09-01

This article describes additive manufacturing (AM) of IN100, a high gamma-prime nickel-based superalloy, through scanning laser epitaxy (SLE), aimed at the creation of thick deposits onto like-chemistry substrates for enabling repair of turbine engine hot-section components. SLE is a metal powder bed-based laser AM technology developed for nickel-base superalloys with equiaxed, directionally solidified, and single-crystal microstructural morphologies. Here, we combine process modeling, statistical design-of-experiments (DoE), and microstructural characterization to demonstrate fully metallurgically bonded, crack-free and dense deposits exceeding 1000 μm of SLE-processed IN100 powder onto IN100 cast substrates produced in a single pass. A combined thermal-fluid flow-solidification model of the SLE process compliments DoE-based process development. A customized quantitative metallography technique analyzes digital cross-sectional micrographs and extracts various microstructural parameters, enabling process model validation and process parameter optimization. Microindentation measurements show an increase in the hardness by 10 pct in the deposit region compared to the cast substrate due to microstructural refinement. The results illustrate one of the very few successes reported for the crack-free deposition of IN100, a notoriously "non-weldable" hot-section alloy, thus establishing the potential of SLE as an AM method suitable for hot-section component repair and for future new-make components in high gamma-prime containing crack-prone nickel-based superalloys.

Apparatus for chemical amplification based on fluid partitioning in an immiscible liquid

DOEpatents

Anderson, Brian L [Lodi, CA; Colston, Bill W [San Ramon, CA; Elkin, Christopher J [San Ramon, CA

2012-05-08

A system for nucleic acid amplification of a sample comprises partitioning the sample into partitioned sections and performing PCR on the partitioned sections of the sample. Another embodiment of the invention provides a system for nucleic acid amplification and detection of a sample comprising partitioning the sample into partitioned sections, performing PCR on the partitioned sections of the sample, and detecting and analyzing the partitioned sections of the sample.

Method for chemical amplification based on fluid partitioning in an immiscible liquid

DOEpatents

Anderson, Brian L.; Colston, Bill W.; Elkin, Christopher J.

2015-06-02

A system for nucleic acid amplification of a sample comprises partitioning the sample into partitioned sections and performing PCR on the partitioned sections of the sample. Another embodiment of the invention provides a system for nucleic acid amplification and detection of a sample comprising partitioning the sample into partitioned sections, performing PCR on the partitioned sections of the sample, and detecting and analyzing the partitioned sections of the sample.

Method for chemical amplification based on fluid partitioning in an immiscible liquid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Brian L.; Colston, Bill W.; Elkin, Christopher J.

A system for nucleic acid amplification of a sample comprises partitioning the sample into partitioned sections and performing PCR on the partitioned sections of the sample. Another embodiment of the invention provides a system for nucleic acid amplification and detection of a sample comprising partitioning the sample into partitioned sections, performing PCR on the partitioned sections of the sample, and detecting and analyzing the partitioned sections of the sample.

A Guide for Recertification of Ground Based Pressure Vessels and Liquid Holding Tanks

DTIC Science & Technology

1987-12-15

Boiler and Pressure Vessel Code , Section...Requirements 202 Calculate Vessel MAWP Using ASME Boiler and Pressure Vessel Code Section VUI, Division 1. 203 Assess Vessel MAWP Using ASME Boiler and Pressure Vessel Code Section...Engineers (ASME) Boiler and Pressure Vessel Code (B&PV) Section VIll, Division 1, or other applicable standard. This activity involves the

Current information technology needs of small to medium sized apparel manufacturers and contractors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wimple, C., LLNL

1998-04-01

This report documents recent efforts of the American Textile Partnership (AMTEX{sup TM}) Demand Activated Manufacturing Architecture (DAMA) Project to identify opportunities for cost effective enhanced information technology use by small to medium sized apparel manufacturers and contractors. Background on the AMTEX/DAMA project and objectives for the specific DAMA Small and Medium Enterprise (SME) effort are discussed in this section. The approach used to gather information about current opportunities or needs is outlined in Section 2 Approach, and relevant findings are identified and a brief analysis of the information gathered is presented in Section 3 Findings. Recommendations based on the analysis,more » are offered in Section 4 Recommendations, and plans are suggested for DAMA follow-on in Section 5 Future Plans. Trip reports for each of the companies visited are contained in Appendix E - Company Trip Reports. These individual reports contain the data upon which the analysis presented in Section 3 Findings is based.« less

Hierarchical patch-based co-registration of differently stained histopathology slides

NASA Astrophysics Data System (ADS)

Yigitsoy, Mehmet; Schmidt, Günter

2017-03-01

Over the past decades, digital pathology has emerged as an alternative way of looking at the tissue at subcellular level. It enables multiplexed analysis of different cell types at micron level. Information about cell types can be extracted by staining sections of a tissue block using different markers. However, robust fusion of structural and functional information from different stains is necessary for reproducible multiplexed analysis. Such a fusion can be obtained via image co-registration by establishing spatial correspondences between tissue sections. Spatial correspondences can then be used to transfer various statistics about cell types between sections. However, the multi-modal nature of images and sparse distribution of interesting cell types pose several challenges for the registration of differently stained tissue sections. In this work, we propose a co-registration framework that efficiently addresses such challenges. We present a hierarchical patch-based registration of intensity normalized tissue sections. Preliminary experiments demonstrate the potential of the proposed technique for the fusion of multi-modal information from differently stained digital histopathology sections.

Comparison of the Joel-Cohen-based technique and the transverse Pfannenstiel for caesarean section for safety and effectiveness: A systematic review and meta-analysis.

PubMed

Olyaeemanesh, Alireza; Bavandpour, Elahe; Mobinizadeh, Mohammadreza; Ashrafinia, Mansoor; Bavandpour, Maryam; Nouhi, Mojtaba

2017-01-01

Background: Caesarean section (C-section) is the most common surgery among women worldwide, and the global rate of this surgical procedure has been continuously rising. Hence, it is significantly crucial to develop and apply highly effective and safe caesarean section techniques. In this review study, we aimed at assessing the safety and effectiveness of the Joel-Cohen-based technique and comparing the results with the transverse Pfannenstiel incision for C-section. Methods: In this study, various reliable databases such as the PubMed Central, COCHRANE, DARE, and Ovid MEDLINE were targeted. Reviews, systematic reviews, and randomized clinical trial studies comparing the Joel-Cohen-based technique and the transverse Pfannenstiel incision were selected based on the inclusion criteria. Selected studies were checked by 2 independent reviewers based on the inclusion criteria, and the quality of these studies was assessed. Then, their data were extracted and analyzed. Results: Five randomized clinical trial studies met the inclusion criteria. According to the exiting evidence, statistical results of the Joel-Cohen-based technique showed that this technique is more effective compared to the transverse Pfannenstiel incision. Metaanalysis results of the 3 outcomes were as follow: operation time (5 trials, 764 women; WMD -9.78; 95% CI:-14.49-5.07 minutes, p<0.001), blood loss (3 trials, 309 women; WMD -53.23ml; 95% -CI: 90.20-16.26 ml, p= 0.004), and post-operative hospital stay (3 trials, 453 women; WMD -.69 day; 95% CI: 1.4-0.03 day, p<0.001). Statistical results revealed a significant difference between the 2 techniques. Conclusion: According to the literature, despite having a number of side effects, the Joel-Cohen-based technique is generally more effective than the Pfannenstiel incision technique. In addition, it was recommended that the Joel-Cohen-based technique be used as a replacement for the Pfannenstiel incision technique according to the surgeons' preferences and the patients' conditions.

49 CFR 40.355 - What limitations apply to the activities of service agents?

Code of Federal Regulations, 2013 CFR

2013-10-01

... section, you must not make decisions to test an employee based upon reasonable suspicion, post-accident... this section, you may make decisions to test an employee based upon reasonable suspicion, post-accident... behalf of a service agent. (b) You must not act as an intermediary in the transmission of drug test...

49 CFR 40.355 - What limitations apply to the activities of service agents?

Code of Federal Regulations, 2011 CFR

2011-10-01

... section, you must not make decisions to test an employee based upon reasonable suspicion, post-accident... this section, you may make decisions to test an employee based upon reasonable suspicion, post-accident... behalf of a service agent. (b) You must not act as an intermediary in the transmission of drug test...

49 CFR 40.355 - What limitations apply to the activities of service agents?

Code of Federal Regulations, 2012 CFR

2012-10-01

... section, you must not make decisions to test an employee based upon reasonable suspicion, post-accident... this section, you may make decisions to test an employee based upon reasonable suspicion, post-accident... behalf of a service agent. (b) You must not act as an intermediary in the transmission of drug test...

49 CFR 40.355 - What limitations apply to the activities of service agents?

Code of Federal Regulations, 2010 CFR

2010-10-01

... section, you must not make decisions to test an employee based upon reasonable suspicion, post-accident... this section, you may make decisions to test an employee based upon reasonable suspicion, post-accident... behalf of a service agent. (b) You must not act as an intermediary in the transmission of drug test...

49 CFR 40.355 - What limitations apply to the activities of service agents?

Code of Federal Regulations, 2014 CFR

2014-10-01

... section, you must not make decisions to test an employee based upon reasonable suspicion, post-accident... this section, you may make decisions to test an employee based upon reasonable suspicion, post-accident... behalf of a service agent. (b) You must not act as an intermediary in the transmission of drug test...

Description of alpha-nucleus interaction cross sections for cosmic ray shielding studies

NASA Technical Reports Server (NTRS)

Cucinotta, Francis A.; Townsend, Lawrence W.; Wilson, John W.

1993-01-01

Nuclear interactions of high-energy alpha particles with target nuclei important for cosmic ray studies are discussed. Models for elastic, quasi-elastic, and breakup reactions are presented and compared with experimental data. Energy-dependent interaction cross sections and secondary spectra are presented based on theoretical models and the limited experimental data base.

VLBI-based Products - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation › VLBI-based Products USNO Logo USNO Navigation Earth determine Earth Orientation Parameters (EOP) is Very Long Baseline Interferometry (VLBI). USNO provides both

A Project-Based Cornerstone Course in Civil Engineering: Student Perceptions and Identity Development

ERIC Educational Resources Information Center

Marshall, Jill; Bhasin, Amit; Boyles, Stephen; David, Bernard; James, Rachel; Patrick, Anita

2018-01-01

Our study used a natural experiment to compare a project-based cornerstone course with the traditionally-taught introductory course in civil engineering. During the study, two sections of the course were organized around an overarching project, the design of an event center, and the remaining sections used guest lectures, a textbook, and…

Effects of Instructional Strategies Using Cross Sections on the Recognition of Anatomical Structures in Correlated CT and MR Images

ERIC Educational Resources Information Center

Khalil, Mohammed K.; Paas, Fred; Johnson, Tristan E.; Su, Yung K.; Payer, Andrew F.

2008-01-01

This research is an effort to best utilize the interactive anatomical images for instructional purposes based on cognitive load theory. Three studies explored the differential effects of three computer-based instructional strategies that use anatomical cross-sections to enhance the interpretation of radiological images. These strategies include:…

48 CFR 311.7001 - Section 508 accessibility standards for HHS Web site content and communications materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards, and resolve any related issues. (c) Based on those discussions, the Project Officer shall provide... communication must meet the accessibility standards in 36 CFR 1194.22, “Web-based intranet and Internet... standards for HHS Web site content and communications materials. 311.7001 Section 311.7001 Federal...

48 CFR 311.7001 - Section 508 accessibility standards for HHS Web site content and communications materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards, and resolve any related issues. (c) Based on those discussions, the Project Officer shall provide... communication must meet the accessibility standards in 36 CFR 1194.22, “Web-based intranet and Internet... standards for HHS Web site content and communications materials. 311.7001 Section 311.7001 Federal...

48 CFR 311.7001 - Section 508 accessibility standards for HHS Web site content and communications materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards, and resolve any related issues. (c) Based on those discussions, the Project Officer shall provide... communication must meet the accessibility standards in 36 CFR 1194.22, “Web-based intranet and Internet... standards for HHS Web site content and communications materials. 311.7001 Section 311.7001 Federal...

48 CFR 311.7001 - Section 508 accessibility standards for HHS Web site content and communications materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards, and resolve any related issues. (c) Based on those discussions, the Project Officer shall provide... communication must meet the accessibility standards in 36 CFR 1194.22, “Web-based intranet and Internet... standards for HHS Web site content and communications materials. 311.7001 Section 311.7001 Federal...

Introduction to MADE (Careers). Marketing and Distributive Education Competency Based Curriculum Guide.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton. Div. of Vocational Education.

This curriculum guide is one in a series of competency-based instructional materials dealing with marketing and distributive education (MADE). It consists of some introductory remarks concerning the course, a lesson plan, a course outline, and four sections of lessons for use in implementing the course. Covered in the individual sections are the…

WebQuest on Conic Sections as a Learning Tool for Prospective Teachers

ERIC Educational Resources Information Center

Kurtulus, Aytac; Ada, Tuba

2012-01-01

WebQuests incorporate technology with educational concepts through integrating online resources with student-centred and activity-based learning. In this study, we describe and evaluate a WebQuest based on conic sections, which we have used with a group of prospective mathematics teachers. The WebQuest entitled: "Creating a Carpet Design Using…

Advanced Marketing. Marketing Education Teacher's Resource Guide. Expected Student Learning Outcomes and Cross-Referenced Instructional Materials by Competencies.

ERIC Educational Resources Information Center

Smith, Clifton L.

This guide, developed by a project to revise the minimum core competencies for the advanced marketing course in secondary marketing education in Missouri, contains four sections. The first section explains competency-based marketing education, including its mission, nature, curriculum, and the fundamentals of competency-based instruction. The…

Fundamentals of Marketing. Marketing Education Teacher's Resource Guide. Expected Student Learning Outcomes and Cross-Referenced Instructional Materials by Competencies.

ERIC Educational Resources Information Center

Smith, Clifton L.

This guide, developed by a project to revise the minimum core competencies for the Fundamentals of Marketing course in secondary marketing education in Missouri, contains four sections. The first section explains competency-based marketing education, including its mission, nature, curriculum, and the fundamentals of competency-based instruction.…

Guide to Community-Based Rehabilitation Services. Guides for Special Education No. 8.

ERIC Educational Resources Information Center

O'Toole, Brian John

This booklet is intended as an introductory guide to community-based rehabilitation (CBR) services in developing nations. The first section examines the magnitude of the problem; the failure of existing services to meet this challenge; and the need for a model appropriate to developing countries. The second section briefly describes the CBR…

The Inequivalence of an Online and Classroom Based General Psychology Course

ERIC Educational Resources Information Center

Edmonds, Christopher L.

2006-01-01

One-hundred seventy-five students enrolled in either a traditional classroom lecture section of General Psychology or in an online section of the same course were compared on exam performance. When covariates of high school grade point average and SAT composite scores were entered into the analysis, students enrolled in the classroom based lecture…

The Influence of Trainee Gaming Experience and Computer Self-Efficacy on Learner Outcomes of Videogame-Based Learning Environments

DTIC Science & Technology

2005-06-01

videogame-based training environment. In this research, 413 participants played a first-person-perspective videogame that began with a single- player ...section to introduce game-specific tasks, followed by a multi- player section where participants formed small teams to conduct several collaborative...with over four million registered players . In Janurary 2004, America’s Army was used during a four-day inter-semester game- based training exercise at

Simulation-based crisis resource management training for pediatric critical care medicine: a review for instructors.

PubMed

Cheng, Adam; Donoghue, Aaron; Gilfoyle, Elaine; Eppich, Walter

2012-03-01

To review the essential elements of crisis resource management and provide a resource for instructors by describing how to use simulation-based training to teach crisis resource management principles in pediatric acute care contexts. A MEDLINE-based literature source. OUTLINE OF REVIEW: This review is divided into three main sections: Background, Principles of Crisis Resource Management, and Tools and Resources. The background section provides the brief history and definition of crisis resource management. The next section describes all the essential elements of crisis resource management, including leadership and followership, communication, teamwork, resource use, and situational awareness. This is followed by a review of evidence supporting the use of simulation-based crisis resource management training in health care. The last section provides the resources necessary to develop crisis resource management training using a simulation-based approach. This includes a description of how to design pediatric simulation scenarios, how to effectively debrief, and a list of potential assessment tools that instructors can use to evaluate crisis resource management performance during simulation-based training. Crisis resource management principles form the foundation for efficient team functioning and subsequent error reduction in high-stakes environments such as acute care pediatrics. Effective instructor training is required for those programs wishing to teach these principles using simulation-based learning. Dissemination and integration of these principles into pediatric critical care practice has the potential for a tremendous impact on patient safety and outcomes.

Sparsity-based acoustic inversion in cross-sectional multiscale optoacoustic imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, Yiyong; Tzoumas, Stratis; Nunes, Antonio

2015-09-15

Purpose: With recent advancement in hardware of optoacoustic imaging systems, highly detailed cross-sectional images may be acquired at a single laser shot, thus eliminating motion artifacts. Nonetheless, other sources of artifacts remain due to signal distortion or out-of-plane signals. The purpose of image reconstruction algorithms is to obtain the most accurate images from noisy, distorted projection data. Methods: In this paper, the authors use the model-based approach for acoustic inversion, combined with a sparsity-based inversion procedure. Specifically, a cost function is used that includes the L1 norm of the image in sparse representation and a total variation (TV) term. Themore » optimization problem is solved by a numerically efficient implementation of a nonlinear gradient descent algorithm. TV–L1 model-based inversion is tested in the cross section geometry for numerically generated data as well as for in vivo experimental data from an adult mouse. Results: In all cases, model-based TV–L1 inversion showed a better performance over the conventional Tikhonov regularization, TV inversion, and L1 inversion. In the numerical examples, the images reconstructed with TV–L1 inversion were quantitatively more similar to the originating images. In the experimental examples, TV–L1 inversion yielded sharper images and weaker streak artifact. Conclusions: The results herein show that TV–L1 inversion is capable of improving the quality of highly detailed, multiscale optoacoustic images obtained in vivo using cross-sectional imaging systems. As a result of its high fidelity, model-based TV–L1 inversion may be considered as the new standard for image reconstruction in cross-sectional imaging.« less

Demonstration of base catalyzed decomposition process, Navy Public Works Center, Guam, Mariana Islands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmidt, A.J.; Freeman, H.D.; Brown, M.D.

1996-02-01

Base Catalyzed Decomposition (BCD) is a chemical dehalogenation process designed for treating soils and other substrate contaminated with polychlorinated biphenyls (PCB), pesticides, dioxins, furans, and other hazardous organic substances. PCBs are heavy organic liquids once widely used in industry as lubricants, heat transfer oils, and transformer dielectric fluids. In 1976, production was banned when PCBs were recognized as carcinogenic substances. It was estimated that significant quantities (one billion tons) of U.S. soils, including areas on U.S. military bases outside the country, were contaminated by PCB leaks and spills, and cleanup activities began. The BCD technology was developed in response tomore » these activities. This report details the evolution of the process, from inception to deployment in Guam, and describes the process and system components provided to the Navy to meet the remediation requirements. The report is divided into several sections to cover the range of development and demonstration activities. Section 2.0 gives an overview of the project history. Section 3.0 describes the process chemistry and remediation steps involved. Section 4.0 provides a detailed description of each component and specific development activities. Section 5.0 details the testing and deployment operations and provides the results of the individual demonstration campaigns. Section 6.0 gives an economic assessment of the process. Section 7.0 presents the conclusions and recommendations form this project. The appendices contain equipment and instrument lists, equipment drawings, and detailed run and analytical data.« less

Risk of cesarean delivery when second-trimester ultrasound dating disagrees with definite last menstrual period.

PubMed

Grewal, Jagteshwar; Zhang, Jun; Mikolajczyk, Rafael T; Ford, Jessie

2010-08-01

Estimates of gestational age based on early second-trimester ultrasound often differ from that based on the last menstrual period (LMP) even when a woman is certain about her LMP. Discrepancies in these gestational age estimates may be associated with an increased risk of cesarean section and low birth weight. We analyzed 7228 singleton, low-risk, white women from The Routine Antenatal Diagnostic Imaging with Ultrasound trial. The women were recruited at less than 14 weeks of gestation and received ultrasound exams between 15 and 22 weeks. Our results indicate that among nulliparous women, the risk of cesarean section increased from 10% when the ultrasound-based gestational age exceeded the LMP-based estimate by 4 days to 60% when the discrepancy increased to 21 days. Moreover, for each additional day the ultrasound-based estimate exceeded the LMP-based estimate, birth weight was higher by 9.6 g. Our findings indicate that a positive discrepancy (i.e., ultrasound-based estimate exceeds LMP-based estimate) in gestational age is associated with an increased risk of cesarean section. A negative discrepancy, by contrast, may reflect early intrauterine growth restriction and an increased risk of low birth weight. Copyright Thieme Medical Publishers.

42 CFR 431.11 - Organization for administration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Organization for administration. 431.11 Section 431... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE ORGANIZATION AND GENERAL ADMINISTRATION Single State Agency § 431.11 Organization for administration. (a) Basis and purpose. This section, based on section 1902(a...

View southwest of machine shops, building 18 section visible in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View southwest of machine shops, building 18 section visible in foreground; building 16 section on left. This structure consists of two formerly separate buildings. Jet Lowe, Haer staff photographer, summer 1995. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

Improving resolution of crosswell seismic section based on time-frequency analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, H.; Li, Y.

1994-12-31

According to signal theory, to improve resolution of seismic section is to extend high-frequency band of seismic signal. In cross-well section, sonic log can be regarded as a reliable source providing high-frequency information to the trace near the borehole. In such case, what to do is to introduce this high-frequency information into the whole section. However, neither traditional deconvolution algorithms nor some new inversion methods such as BCI (Broad Constraint Inversion) are satisfied because of high-frequency noise and nonuniqueness of inversion results respectively. To overcome their disadvantages, this paper presents a new algorithm based on Time-Frequency Analysis (TFA) technology whichmore » has been increasingly received much attention as an useful signal analysis too. Practical applications show that the new method is a stable scheme to improve resolution of cross-well seismic section greatly without decreasing Signal to Noise Ratio (SNR).« less

Genetic improvement in mastitis resistance: comparison of selection criteria from cross-sectional and random regression sire models for somatic cell score.

PubMed

Odegård, J; Klemetsdal, G; Heringstad, B

2005-04-01

Several selection criteria for reducing incidence of mastitis were developed from a random regression sire model for test-day somatic cell score (SCS). For comparison, sire transmitting abilities were also predicted based on a cross-sectional model for lactation mean SCS. Only first-crop daughters were used in genetic evaluation of SCS, and the different selection criteria were compared based on their correlation with incidence of clinical mastitis in second-crop daughters (measured as mean daughter deviations). Selection criteria were predicted based on both complete and reduced first-crop daughter groups (261 or 65 daughters per sire, respectively). For complete daughter groups, predicted transmitting abilities at around 30 d in milk showed the best predictive ability for incidence of clinical mastitis, closely followed by average predicted transmitting abilities over the entire lactation. Both of these criteria were derived from the random regression model. These selection criteria improved accuracy of selection by approximately 2% relative to a cross-sectional model. However, for reduced daughter groups, the cross-sectional model yielded increased predictive ability compared with the selection criteria based on the random regression model. This result may be explained by the cross-sectional model being more robust, i.e., less sensitive to precision of (co)variance components estimates and effects of data structure.

76 FR 26489 - Medicare Program; Hospital Inpatient Value-Based Purchasing Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-06

...This final rule implements a Hospital Inpatient Value-Based Purchasing program (Hospital VBP program or the program) under section 1886(o) of the Social Security Act (the Act), under which value-based incentive payments will be made in a fiscal year to hospitals that meet performance standards with respect to a performance period for the fiscal year involved. The program will apply to payments for discharges occurring on or after October 1, 2012, in accordance with section 1886(o) (as added by section 3001(a) of the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010 (collectively known as the Affordable Care Act)). Scoring in the Hospital VBP program will be based on whether a hospital meets or exceeds the performance standards established with respect to the measures. By adopting this program, we will reward hospitals based on actual quality performance on measures, rather than simply reporting data for those measures.

Quantum dash based single section mode locked lasers for photonic integrated circuits.

PubMed

Joshi, Siddharth; Calò, Cosimo; Chimot, Nicolas; Radziunas, Mindaugas; Arkhipov, Rostislav; Barbet, Sophie; Accard, Alain; Ramdane, Abderrahim; Lelarge, Francois

2014-05-05

We present the first demonstration of an InAs/InP Quantum Dash based single-section frequency comb generator designed for use in photonic integrated circuits (PICs). The laser cavity is closed using a specifically designed Bragg reflector without compromising the mode-locking performance of the self pulsating laser. This enables the integration of single-section mode-locked laser in photonic integrated circuits as on-chip frequency comb generators. We also investigate the relations between cavity modes in such a device and demonstrate how the dispersion of the complex mode frequencies induced by the Bragg grating implies a violation of the equi-distance between the adjacent mode frequencies and, therefore, forbids the locking of the modes in a classical Bragg Device. Finally we integrate such a Bragg Mirror based laser with Semiconductor Optical Amplifier (SOA) to demonstrate the monolithic integration of QDash based low phase noise sources in PICs.

Risk of Autism Associated with General Anesthesia during Cesarean Delivery: A Population-Based Birth-Cohort Analysis

ERIC Educational Resources Information Center

Chien, Li-Nien; Lin, Hsiu-Chen; Shao, Yu-Hsuan Joni; Chiou, Shu-Ti; Chiou, Hung-Yi

2015-01-01

The rates of Cesarean delivery (C-section) have risen to >30 % in numerous countries. Increased risk of autism has been shown in neonates delivered by C-section. This study examined the incidence of autism in neonates delivered vaginally, by C-section with regional anesthesia (RA), and by C-section with general anesthesia (GA) to evaluate the…

The reliability of photoneutron cross sections for 90,91,92,94Zr

NASA Astrophysics Data System (ADS)

Varlamov, V. V.; Davydov, A. I.; Ishkhanov, B. S.; Orlin, V. N.

2018-05-01

Data on partial photoneutron reaction cross sections (γ,1n) and (γ,2n) for 90,91,92,94Zr obtained at Livermore (USA) and for 90Zr obtained at Saclay (France) were analyzed. Experimental data were obtained using quasimonoenergetic photon beams from the annihilation in flight of relativistic positrons. The method of photoneutron multiplicity sorting based on the neutron energy measuring was used to separate partial reactions. The research carried out is based on the objective of using the physical criteria of data reliability. The large systematic uncertainties were found in partial cross sections, since they do not satisfy those criteria. To obtain the reliable cross sections of the partial (γ,1n) and (γ,2n) and total (γ,1n) + (γ,2n) reactions on 90,91,92,94Zr and (γ,3n) reaction on 94Zr, the experimental-theoretical method was used. It is based on the experimental data for neutron yield cross section rather independent from the neutron multiplicity and theoretical equations of the combined photonucleon reaction model (CPNRM). Newly evaluated data are compared with experimental ones. The reasons of noticeable disagreements between those are discussed.

29 CFR 1640.10 - Section 504 agency review of deferred complaints.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false Section 504 agency review of deferred complaints. 1640.10 Section 1640.10 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION PROCEDURES FOR COORDINATING THE INVESTIGATION OF COMPLAINTS OR CHARGES OF EMPLOYMENT DISCRIMINATION BASED ON...

Kinesiology Workbook and Laboratory Manual.

ERIC Educational Resources Information Center

Harris, Ruth W.

This manual is written for students in anatomy, kinesiology, or introductory biomechanics courses. The book is divided into two sections, a kinesiology workbook and a laboratory manual. The two sections parallel each other in content and format. Each is divided into three corresponding sections: (1) Anatomical bases for movement description; (2)…

77 FR 34461 - Agency Information Collection Activity; Proposed Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-11

... of property under Internal Revenue Code sections 108 and 1017. The regulation affects taxpayers that... is required for a taxpayer to elect to reduce the adjusted bases of depreciable property under section 108(b)(5), to elect to treat section 1221(l) real property as either depreciable property or...

Preparing School Personnel to Implement Section 504

ERIC Educational Resources Information Center

Shaw, Stan F.; Madaus, Joseph W.

2008-01-01

Section 504 of the Rehabilitation Act of 1973 has become an increasingly important mechanism in providing services to students with disabilities in public schools. Because Section 504 is a civil rights law, responsibility for its implementation involves a range of school-based professionals, including administrators, general education teachers,…

Marine Engine Technology. Instructor's Guide.

ERIC Educational Resources Information Center

Seminole Community Coll., Sanford, FL.

This instructor's manual covers 20 competency-based instructional units designed to prepare entry-level outboard marine technicians. The first section explains how to use the materials and lists the units and the modules that constitute each. The second section lists the competencies taught in the course. The third section suggests instructional…

77 FR 5207 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Amendments to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... compound (VOC) emissions from industrial cleaning solvents facilities, automobile and light-duty truck... Organic Compounds,'' section 13.0, ``Automobile and Light-Duty Truck Coating Operations,'' section 16.0... requirements based on EPA CTGs. Amendments to section 13.0 establish (1) applicability for specific automobile...

26 CFR 1.1502-28 - Consolidated section 108.

Code of Federal Regulations, 2010 CFR

2010-04-01

... income that is treated as excluded COD income is determined based on the assets (including stock and... this section. Basis of subsidiary stock, however, shall not be reduced below zero pursuant to paragraph (a)(2) of this section (including when subsidiary stock is treated as depreciable property under...

Learning from graphically integrated 2D and 3D representations improves retention of neuroanatomy

NASA Astrophysics Data System (ADS)

Naaz, Farah

Visualizations in the form of computer-based learning environments are highly encouraged in science education, especially for teaching spatial material. Some spatial material, such as sectional neuroanatomy, is very challenging to learn. It involves learning the two dimensional (2D) representations that are sampled from the three dimensional (3D) object. In this study, a computer-based learning environment was used to explore the hypothesis that learning sectional neuroanatomy from a graphically integrated 2D and 3D representation will lead to better learning outcomes than learning from a sequential presentation. The integrated representation explicitly demonstrates the 2D-3D transformation and should lead to effective learning. This study was conducted using a computer graphical model of the human brain. There were two learning groups: Whole then Sections, and Integrated 2D3D. Both groups learned whole anatomy (3D neuroanatomy) before learning sectional anatomy (2D neuroanatomy). The Whole then Sections group then learned sectional anatomy using 2D representations only. The Integrated 2D3D group learned sectional anatomy from a graphically integrated 3D and 2D model. A set of tests for generalization of knowledge to interpreting biomedical images was conducted immediately after learning was completed. The order of presentation of the tests of generalization of knowledge was counterbalanced across participants to explore a secondary hypothesis of the study: preparation for future learning. If the computer-based instruction programs used in this study are effective tools for teaching anatomy, the participants should continue learning neuroanatomy with exposure to new representations. A test of long-term retention of sectional anatomy was conducted 4-8 weeks after learning was completed. The Integrated 2D3D group was better than the Whole then Sections group in retaining knowledge of difficult instances of sectional anatomy after the retention interval. The benefit of learning from an integrated 2D3D representation suggests that there are some spatial transformations which are better retained if they are learned through an explicit demonstration. Participants also showed evidence of continued learning on the tests of generalization with the help of cues and practice, even without feedback. This finding suggests that the computer-based learning programs used in this study were good tools for instruction of neuroanatomy.

49 CFR 24.301 - Payment for actual reasonable moving and related expenses.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (4) Storage of the personal property for a period not to exceed 12 months, unless the Agency... (g)(1) through (g)(7) of this section. Self-moves based on the lower of two bids or estimates are not...-moves based on the lower of two bids or estimates are not eligible for reimbursement under this section...

49 CFR 24.301 - Payment for actual reasonable moving and related expenses.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... (4) Storage of the personal property for a period not to exceed 12 months, unless the Agency... (g)(1) through (g)(7) of this section. Self-moves based on the lower of two bids or estimates are not...-moves based on the lower of two bids or estimates are not eligible for reimbursement under this section...

49 CFR 24.301 - Payment for actual reasonable moving and related expenses.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... (4) Storage of the personal property for a period not to exceed 12 months, unless the Agency... (g)(1) through (g)(7) of this section. Self-moves based on the lower of two bids or estimates are not...-moves based on the lower of two bids or estimates are not eligible for reimbursement under this section...

49 CFR 24.301 - Payment for actual reasonable moving and related expenses.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (4) Storage of the personal property for a period not to exceed 12 months, unless the Agency... (g)(1) through (g)(7) of this section. Self-moves based on the lower of two bids or estimates are not...-moves based on the lower of two bids or estimates are not eligible for reimbursement under this section...

49 CFR 24.301 - Payment for actual reasonable moving and related expenses.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... (4) Storage of the personal property for a period not to exceed 12 months, unless the Agency... (g)(1) through (g)(7) of this section. Self-moves based on the lower of two bids or estimates are not...-moves based on the lower of two bids or estimates are not eligible for reimbursement under this section...

75 FR 69058 - Request for Comment on a Proposal to Exempt, Pursuant to the Authority in Section 4(c) of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-10

... categorical Section 4(c) exemption to permit options and futures on shares of all or some precious metal commodity-based ETFs to be traded and cleared as options on securities and security futures, respectively... options and futures on shares of precious metal commodity- based ETFs. The Commission believes that...

Scenario-Based Case Study Method and the Functionality of the Section Called "From Production to Consumption" from the Perspective of Primary School Students

ERIC Educational Resources Information Center

Taneri, Ahu

2018-01-01

In this research, the aim was showing the evaluation of students on scenario-based case study method and showing the functionality of the studied section called "from production to consumption". Qualitative research method and content analysis were used to reveal participants' experiences and reveal meaningful relations regarding…

A Theoretical Model of Concept Learning in Economics. Studies in Economic Education, No. 10. Revised Edition.

ERIC Educational Resources Information Center

Lephardt, Noreen E.; Lephardt, George P.

A paradigm for learning economic concepts based on cognitive development and learning theory is offered as a guideline for teaching and research. Discussion is divided into two sections. The first section establishes the model's theoretical framework, which is based on two propositions. The first of these is that economic knowledge is not a fixed…

Web-Based Time Synchronization - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Precise Time › Display Clocks USNO Logo USNO Navigation Master Clock GPS Display Clocks TWSTT Telephone Time NTP Info Web-Based Time Synchronization Web time displays from the

26 CFR 1.172-13 - Product liability losses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 3. Y, a professional medical association, is sued by B, a patient, in an action based on the malpractice of one of its doctors. B recovers $25,000. Because the suit was based on the services of B, the... 172(j)(3) not to have section 172(b)(1)(I) apply. (4) Relationship with section 172(b)(3)(C) election...

A Digital Badging Dataset Focused on Performance, Engagement and Behavior-Related Variables from Observations in Web-Based University Courses

ERIC Educational Resources Information Center

McDaniel, Rudy; Fanfarelli, Joseph R.

2015-01-01

This dataset contains participant data related to the use of badging (achievement) feedback in pedagogical design. Two sections each of web-based graphic design and web design undergraduate courses were offered at the University of Central Florida. A badging system for achievements was included in one section of each. Performance, engagement and…

77 FR 21854 - Collection of Checks and Other Items by Federal Reserve Banks and Funds Transfers Through Fedwire...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-12

... Commercial Code (UCC).\\3\\ The Board specifically requested comment on the following two items: whether use of... entirely, as the Reserve Banks could simply pay direct compensation based on the provisions of UCC section... compensation based on the provisions of UCC section 4A-506, which is already incorporated into Regulation J...

75 FR 34360 - Consumer Product Safety Act: Notice of Commission Action on the Stay of Enforcement of Testing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-17

... certification provisions of section 14 of the Consumer Product Safety Act (CPSA) as amended by section 102 of..., the certification must be based on a test of each product or a reasonable testing program. For children's products, the certification must be based on testing conducted by a CPSC-accepted third party...

76 FR 59713 - Notice of Submission of Proposed Information Collection to OMB Annual Adjustment Factors (AAF...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... subject proposal. Owners of project-based section 8 contracts that utilize the AAF as the method of rent.... Description of the Need for the Information and its Proposed Use: Owners of project-based section 8 contracts that utilize the AAF as the method of rent adjustment provide this information which is necessary to...

Total electron scattering cross sections of some important biomolecules at 0.2-6.0 keV energies

NASA Astrophysics Data System (ADS)

Gurung, Meera Devi; Ariyasinghe, W. M.

2017-12-01

The total electron scattering cross sections (TCS) of five nucleic bases (adenine, cytosine, guanine, thymine and uracil), phosphoric acid, three amino acids (glycine, lysine, and L-histidine), D-glucose, alpha-D-glucose, tetrahydropyran (THP), 3-hydroxytetrahydrofuran and furan have been determined in the energy range 0.2-6.0 keV using a simple model based on the effective atomic total electron scattering cross sections (EATCS). The reliability of the model is confirmed by comparing the determined TCS with the predictions of those by existing theoretical models.

The construction phase’s influence to the moving ability of cross-sections of woven structure

NASA Astrophysics Data System (ADS)

Inogamdjanov, D.; Daminov, A.; Kasimov, O.

2017-10-01

The purpose of this study is to work out bases to predict properties for single layer flat woven fabrics depending on changes of construction phases. A structural model of cross-section of single layered fabric is described based on the Pierce’s model. Form transformation of the yarn like straight, semi-arch and arch yarn is considered according to the alteration of yarn tension under the theory of Novikov. The value contributions to movement index of warp and weft yarn and their total moving ability in cross-sections at all structure phases of fabric are summarized.

The National Biological Information Infrastructure: Coming of age

USGS Publications Warehouse

Cotter, G.; Frame, M.; Sepic, R.; Zolly, L.

2000-01-01

Coordinated by the US Geological Survey, the National Biological Information Infrastructure (NBII) is a Web-based system that provides increased access to data and information on the nation's biological resources. The NBII can be viewed from a variety of perspectives. This article - an individual case study and not a broad survey with extensive references to the literature - addresses the structure of the NBII related to thematic sections, infrastructure sections and place-based sections, and other topics such as the Integrated Taxonomic Information System (one of our more innovative tools) and the development of our controlled vocabulary.

Geoscience after ITPart G. Familiarization with spatial analysis

NASA Astrophysics Data System (ADS)

Pundt, Hardy; Brinkkötter-Runde, Klaus

2000-04-01

Field based and GPS supported GIS are increasingly applied in various spatial disciplines. Such systems represent more sophisticated, time and cost effective tools than traditional field forms for data acquisition. Meanwhile, various systems are on the market. These mostly enable the user to define geo-objects by means of GPS information, supported by functionalities to collect and analyze geometric information. The digital acquisition of application specific attributes is often underrepresented within such systems. This is surprising because pen computer based GIS can be used to collect attributes in a profitable manner, thus adequately supporting the requirements of the user. Visualization and graphic displays of spatial data are helpful means to improve such a data collection process. In section one and two basic aspects of visualization and current uses of visualization techniques for field based GIS are described. Section three mentions new developments within the framework of wearable computing and augmented reality. Section four describes current activities aimed at the realization of real time online field based GIS. This includes efforts to realize an online GIS data link to improve the efficiency and the quality of fieldwork. A brief discussion in section five leads to conclusions and some key issues for future research.

Structuring Legacy Pathology Reports by openEHR Archetypes to Enable Semantic Querying.

PubMed

Kropf, Stefan; Krücken, Peter; Mueller, Wolf; Denecke, Kerstin

2017-05-18

Clinical information is often stored as free text, e.g. in discharge summaries or pathology reports. These documents are semi-structured using section headers, numbered lists, items and classification strings. However, it is still challenging to retrieve relevant documents since keyword searches applied on complete unstructured documents result in many false positive retrieval results. We are concentrating on the processing of pathology reports as an example for unstructured clinical documents. The objective is to transform reports semi-automatically into an information structure that enables an improved access and retrieval of relevant data. The data is expected to be stored in a standardized, structured way to make it accessible for queries that are applied to specific sections of a document (section-sensitive queries) and for information reuse. Our processing pipeline comprises information modelling, section boundary detection and section-sensitive queries. For enabling a focused search in unstructured data, documents are automatically structured and transformed into a patient information model specified through openEHR archetypes. The resulting XML-based pathology electronic health records (PEHRs) are queried by XQuery and visualized by XSLT in HTML. Pathology reports (PRs) can be reliably structured into sections by a keyword-based approach. The information modelling using openEHR allows saving time in the modelling process since many archetypes can be reused. The resulting standardized, structured PEHRs allow accessing relevant data by retrieving data matching user queries. Mapping unstructured reports into a standardized information model is a practical solution for a better access to data. Archetype-based XML enables section-sensitive retrieval and visualisation by well-established XML techniques. Focussing the retrieval to particular sections has the potential of saving retrieval time and improving the accuracy of the retrieval.

Estimation of contribution ratios of pollutant sources to a specific section based on an enhanced water quality model.

PubMed

Cao, Bibo; Li, Chuan; Liu, Yan; Zhao, Yue; Sha, Jian; Wang, Yuqiu

2015-05-01

Because water quality monitoring sections or sites could reflect the water quality status of rivers, surface water quality management based on water quality monitoring sections or sites would be effective. For the purpose of improving water quality of rivers, quantifying the contribution ratios of pollutant resources to a specific section is necessary. Because physical and chemical processes of nutrient pollutants are complex in water bodies, it is difficult to quantitatively compute the contribution ratios. However, water quality models have proved to be effective tools to estimate surface water quality. In this project, an enhanced QUAL2Kw model with an added module was applied to the Xin'anjiang Watershed, to obtain water quality information along the river and to assess the contribution ratios of each pollutant source to a certain section (the Jiekou state-controlled section). Model validation indicated that the results were reliable. Then, contribution ratios were analyzed through the added module. Results show that among the pollutant sources, the Lianjiang tributary contributes the largest part of total nitrogen (50.43%), total phosphorus (45.60%), ammonia nitrogen (32.90%), nitrate (nitrite + nitrate) nitrogen (47.73%), and organic nitrogen (37.87%). Furthermore, contribution ratios in different reaches varied along the river. Compared with pollutant loads ratios of different sources in the watershed, an analysis of contribution ratios of pollutant sources for each specific section, which takes the localized chemical and physical processes into consideration, was more suitable for local-regional water quality management. In summary, this method of analyzing the contribution ratios of pollutant sources to a specific section based on the QUAL2Kw model was found to support the improvement of the local environment.

Continuously Deformation Monitoring of Subway Tunnel Based on Terrestrial Point Clouds

NASA Astrophysics Data System (ADS)

Kang, Z.; Tuo, L.; Zlatanova, S.

2012-07-01

The deformation monitoring of subway tunnel is of extraordinary necessity. Therefore, a method for deformation monitoring based on terrestrial point clouds is proposed in this paper. First, the traditional adjacent stations registration is replaced by sectioncontrolled registration, so that the common control points can be used by each station and thus the error accumulation avoided within a section. Afterwards, the central axis of the subway tunnel is determined through RANSAC (Random Sample Consensus) algorithm and curve fitting. Although with very high resolution, laser points are still discrete and thus the vertical section is computed via the quadric fitting of the vicinity of interest, instead of the fitting of the whole model of a subway tunnel, which is determined by the intersection line rotated about the central axis of tunnel within a vertical plane. The extraction of the vertical section is then optimized using RANSAC for the purpose of filtering out noises. Based on the extracted vertical sections, the volume of tunnel deformation is estimated by the comparison between vertical sections extracted at the same position from different epochs of point clouds. Furthermore, the continuously extracted vertical sections are deployed to evaluate the convergent tendency of the tunnel. The proposed algorithms are verified using real datasets in terms of accuracy and computation efficiency. The experimental result of fitting accuracy analysis shows the maximum deviation between interpolated point and real point is 1.5 mm, and the minimum one is 0.1 mm; the convergent tendency of the tunnel was detected by the comparison of adjacent fitting radius. The maximum error is 6 mm, while the minimum one is 1 mm. The computation cost of vertical section abstraction is within 3 seconds/section, which proves high efficiency..

Turning the Page: Advancing Paper-Based Microfluidics for Broad Diagnostic Application.

PubMed

Gong, Max M; Sinton, David

2017-06-28

Infectious diseases are a major global health issue. Diagnosis is a critical first step in effectively managing their spread. Paper-based microfluidic diagnostics first emerged in 2007 as a low-cost alternative to conventional laboratory testing, with the goal of improving accessibility to medical diagnostics in developing countries. In this review, we examine the advances in paper-based microfluidic diagnostics for medical diagnosis in the context of global health from 2007 to 2016. The theory of fluid transport in paper is first presented. The next section examines the strategies that have been employed to control fluid and analyte transport in paper-based assays. Tasks such as mixing, timing, and sequential fluid delivery have been achieved in paper and have enabled analytical capabilities comparable to those of conventional laboratory methods. The following section examines paper-based sample processing and analysis. The most impactful advancement here has been the translation of nucleic acid analysis to a paper-based format. Smartphone-based analysis is another exciting development with potential for wide dissemination. The last core section of the review highlights emerging health applications, such as male fertility testing and wearable diagnostics. We conclude the review with the future outlook, remaining challenges, and emerging opportunities.

Extracting Cross-Sectional Clinical Images Based on Their Principal Axes of Inertia

PubMed Central

Fan, Yuzhou; Djuric, Marija; Li, Zhiyu; Antonijevic, Djordje; Milenkovic, Petar; Sun, Yueyang; Li, Ruining

2017-01-01

Cross-sectional imaging is considered the gold standard in diagnosing a range of diseases. However, despite its widespread use in clinical practice and research, no widely accepted method is available to reliably match cross-sectional planes in several consecutive scans. This deficiency can impede comparison between cross-sectional images and ultimately lead to misdiagnosis. Here, we propose and demonstrate a method for finding the same imaging plane in images obtained during separate scanning sessions. Our method is based on the reconstruction of a “virtual organ” from which arbitrary cross-sectional images can be extracted, independent of the axis orientation in the original scan or cut; the key is to establish unique body coordinates of the organ from its principal axes of inertia. To verify our method a series of tests were performed, and the same cross-sectional plane was successfully extracted. This new approach offers clinicians access, after just a single scanning session, to the morphology and structure of a lesion through cross-sectional images reconstructed along arbitrary axes. It also aids comparable detection of morphological and structural changes in the same imaging plane from scans of the same patient taken at different times—thus potentially reducing the misdiagnosis rate when cross-sectional images are interpreted. PMID:29410714

Extracting Cross-Sectional Clinical Images Based on Their Principal Axes of Inertia.

PubMed

Fan, Yuzhou; Luo, Liangping; Djuric, Marija; Li, Zhiyu; Antonijevic, Djordje; Milenkovic, Petar; Sun, Yueyang; Li, Ruining; Fan, Yifang

2017-01-01

Cross-sectional imaging is considered the gold standard in diagnosing a range of diseases. However, despite its widespread use in clinical practice and research, no widely accepted method is available to reliably match cross-sectional planes in several consecutive scans. This deficiency can impede comparison between cross-sectional images and ultimately lead to misdiagnosis. Here, we propose and demonstrate a method for finding the same imaging plane in images obtained during separate scanning sessions. Our method is based on the reconstruction of a "virtual organ" from which arbitrary cross-sectional images can be extracted, independent of the axis orientation in the original scan or cut; the key is to establish unique body coordinates of the organ from its principal axes of inertia. To verify our method a series of tests were performed, and the same cross-sectional plane was successfully extracted. This new approach offers clinicians access, after just a single scanning session, to the morphology and structure of a lesion through cross-sectional images reconstructed along arbitrary axes. It also aids comparable detection of morphological and structural changes in the same imaging plane from scans of the same patient taken at different times-thus potentially reducing the misdiagnosis rate when cross-sectional images are interpreted.

Coach simplified structure modeling and optimization study based on the PBM method

NASA Astrophysics Data System (ADS)

Zhang, Miaoli; Ren, Jindong; Yin, Ying; Du, Jian

2016-09-01

For the coach industry, rapid modeling and efficient optimization methods are desirable for structure modeling and optimization based on simplified structures, especially for use early in the concept phase and with capabilities of accurately expressing the mechanical properties of structure and with flexible section forms. However, the present dimension-based methods cannot easily meet these requirements. To achieve these goals, the property-based modeling (PBM) beam modeling method is studied based on the PBM theory and in conjunction with the characteristics of coach structure of taking beam as the main component. For a beam component of concrete length, its mechanical characteristics are primarily affected by the section properties. Four section parameters are adopted to describe the mechanical properties of a beam, including the section area, the principal moments of inertia about the two principal axles, and the torsion constant of the section. Based on the equivalent stiffness strategy, expressions for the above section parameters are derived, and the PBM beam element is implemented in HyperMesh software. A case is realized using this method, in which the structure of a passenger coach is simplified. The model precision is validated by comparing the basic performance of the total structure with that of the original structure, including the bending and torsion stiffness and the first-order bending and torsional modal frequencies. Sensitivity analysis is conducted to choose design variables. The optimal Latin hypercube experiment design is adopted to sample the test points, and polynomial response surfaces are used to fit these points. To improve the bending and torsion stiffness and the first-order torsional frequency and taking the allowable maximum stresses of the braking and left turning conditions as constraints, the multi-objective optimization of the structure is conducted using the NSGA-II genetic algorithm on the ISIGHT platform. The result of the Pareto solution set is acquired, and the selection strategy of the final solution is discussed. The case study demonstrates that the mechanical performances of the structure can be well-modeled and simulated by PBM beam. Because of the merits of fewer parameters and convenience of use, this method is suitable to be applied in the concept stage. Another merit is that the optimization results are the requirements for the mechanical performance of the beam section instead of those of the shape and dimensions, bringing flexibility to the succeeding design.

Evaluating the role of functional impairment in personality psychopathology.

PubMed

Boland, Jennifer K; Damnjanovic, Tatjana; Anderson, Jaime L

2018-03-22

DSM-5's Section III Alternative Model for Personality Disorder (AMPD) model states that an individual must show impairment in self and interpersonal functioning for PD diagnosis. The current study investigated dimensional personality trait associations with impairment, including differential patterns of impairment across specific PDs, and whether traits have improved our assessment of functional impairment in PDs. Two-hundred and seventy-seven participants were administered measures of Antisocial PD, Avoidant PD, Borderline PD, Narcissistic PD, Obsessive-Compulsive PD, and Schizotypal PD from the perspectives of Section II (PDQ-4) and Section III (PID-5) PD models, as well as measures of functional impairment in interpersonal and intrapersonal domains. Pearson correlations showed associations between ratings of impairment and most Section II and Section III PDs and trait facets, with the exception of narcissistic PD. Hierarchical regression analyses revealed that Section III PDs added predictive validity beyond Section II PDs in predicting impairment, except narcissistic PD. These findings provide support both for the impairment criterion in the AMPD and for the association between trait-based PDs and impairment, and suggest that this trait-based measurement adds uniquely to the understanding of functional impairment. Copyright © 2018. Published by Elsevier B.V.

A proposal of an architecture for the coordination level of intelligent machines

NASA Technical Reports Server (NTRS)

Beard, Randall; Farah, Jeff; Lima, Pedro

1993-01-01

The issue of obtaining a practical, structured, and detailed description of an architecture for the Coordination Level of Center for Intelligent Robotic Systems for Sapce Exploration (CIRSSE) Testbed Intelligent Controller is addressed. Previous theoretical and implementation works were the departure point for the discussion. The document is organized as follows: after this introductory section, section 2 summarizes the overall view of the Intelligent Machine (IM) as a control system, proposing a performance measure on which to base its design. Section 3 addresses with some detail implementation issues. An hierarchic petri-net with feedback-based learning capabilities is proposed. Finally, section 4 is an attempt to address the feedback problem. Feedback is used for two functions: error recovery and reinforcement learning of the correct translations for the petri-net transitions.

Towards Artificial Speech Therapy: A Neural System for Impaired Speech Segmentation.

PubMed

Iliya, Sunday; Neri, Ferrante

2016-09-01

This paper presents a neural system-based technique for segmenting short impaired speech utterances into silent, unvoiced, and voiced sections. Moreover, the proposed technique identifies those points of the (voiced) speech where the spectrum becomes steady. The resulting technique thus aims at detecting that limited section of the speech which contains the information about the potential impairment of the speech. This section is of interest to the speech therapist as it corresponds to the possibly incorrect movements of speech organs (lower lip and tongue with respect to the vocal tract). Two segmentation models to detect and identify the various sections of the disordered (impaired) speech signals have been developed and compared. The first makes use of a combination of four artificial neural networks. The second is based on a support vector machine (SVM). The SVM has been trained by means of an ad hoc nested algorithm whose outer layer is a metaheuristic while the inner layer is a convex optimization algorithm. Several metaheuristics have been tested and compared leading to the conclusion that some variants of the compact differential evolution (CDE) algorithm appears to be well-suited to address this problem. Numerical results show that the SVM model with a radial basis function is capable of effective detection of the portion of speech that is of interest to a therapist. The best performance has been achieved when the system is trained by the nested algorithm whose outer layer is hybrid-population-based/CDE. A population-based approach displays the best performance for the isolation of silence/noise sections, and the detection of unvoiced sections. On the other hand, a compact approach appears to be clearly well-suited to detect the beginning of the steady state of the voiced signal. Both the proposed segmentation models display outperformed two modern segmentation techniques based on Gaussian mixture model and deep learning.

40 CFR 93.158 - Criteria for determining conformity of general Federal actions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirements: (i) Specified in paragraph (b) of this section, based on areawide air quality modeling analysis and local air quality modeling analysis; or (ii) Meet the requirements of paragraph (a)(5) of this section and, for local air quality modeling analysis, the requirement of paragraph (b) of this section; (4...

40 CFR 93.158 - Criteria for determining conformity of general Federal actions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements: (i) Specified in paragraph (b) of this section, based on areawide air quality modeling analysis and local air quality modeling analysis; or (ii) Meet the requirements of paragraph (a)(5) of this section and, for local air quality modeling analysis, the requirement of paragraph (b) of this section; (4...

40 CFR 93.158 - Criteria for determining conformity of general Federal actions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements: (i) Specified in paragraph (b) of this section, based on areawide air quality modeling analysis and local air quality modeling analysis; or (ii) Meet the requirements of paragraph (a)(5) of this section and, for local air quality modeling analysis, the requirement of paragraph (b) of this section; (4...

Teaching Inquiry with Linked Classes and Learning Communities

ERIC Educational Resources Information Center

Piercey, Victor; Cullen, Roxanne

2017-01-01

In order to improve problem-solving dispositions, a section of an inquiry-based math sequence for first-year business students was linked with a section of our general education English sequence. We describe how the linked classes worked and compare some preliminary results from linked and unlinked sections of the math sequence.

The Effect of Assessment Style on Student Epistemologies in Introductory Physics

ERIC Educational Resources Information Center

Bowen, Mark Ryan

2011-01-01

Epistemologies were measured across two separate lecture sections of introductory algebra-based physics at UC Davis. Remarkable differences in epistemologies, as measured by the MPEX II survey were noted with one section's students (section A) showing significantly better gains in almost all epistemological categories than the other (section…

Cross-Cultural Perspectives in Human Development: Theory, Research and Applications.

ERIC Educational Resources Information Center

Saraswathi, T. S., Ed.

This book is based on lectures delivered by 12 cross-cultural social science scholars drawn from 7 countries to address critical issues related to knowledge construction in human development and allied disciplines. The book is organized into two major sections. Section 1 focuses on theoretical perspectives and Section 2 highlights ongoing research…

Federal Funding Sources for Public Job Creation Initiatives.

ERIC Educational Resources Information Center

Johnson, Clifford M.; Savner, Steve

This overview on potential funding sources describes three major federal programs that can provide a financing base for public job creation initiatives serving hard-to-employ welfare recipients and non-custodial parents. Section I is an introduction. Section II focuses on the Temporary Assistance to Needy Families (TANF) block grant. Section III…

Computer-Based Learning: Graphical Integration of Whole and Sectional Neuroanatomy Improves Long-Term Retention

ERIC Educational Resources Information Center

Naaz, Farah; Chariker, Julia H.; Pani, John R.

2014-01-01

A study was conducted to test the hypothesis that instruction with graphically integrated representations of whole and sectional neuroanatomy is especially effective for learning to recognize neural structures in sectional imagery (such as magnetic resonance imaging [MRI]). Neuroanatomy was taught to two groups of participants using computer…

42 CFR 447.510 - Requirements for manufacturers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... report must include: (1) AMP, calculated in accordance with section 1927(k)(1) of the Social Security Act... provided for in section 1927(k)(1) of the Social Security Act. (ii) A manufacturer may choose to... should be calculated based on section 1927(k)(1) of the Social Security Act, except the period covered...

Online Information Services for Secondary School Students. Second Edition.

ERIC Educational Resources Information Center

Aversa, Elizabeth Smith; And Others

This guide addresses the role of online searching in school library media centers. The first section reviews the literature in the area and presents guidelines for planning and implementing online access for students based on the experiences reported. This section lists 44 references. The second section summarizes the results of a 1986 survey of…

Effects of instructional strategies using cross sections on the recognition of anatomical structures in correlated CT and MR images.

PubMed

Khalil, Mohammed K; Paas, Fred; Johnson, Tristan E; Su, Yung K; Payer, Andrew F

2008-01-01

This research is an effort to best utilize the interactive anatomical images for instructional purposes based on cognitive load theory. Three studies explored the differential effects of three computer-based instructional strategies that use anatomical cross-sections to enhance the interpretation of radiological images. These strategies include: (1) cross-sectional images of the head that can be superimposed on radiological images, (2) transparent highlighting of anatomical structures in radiological images, and (3) cross-sectional images of the head with radiological images presented side-by-side. Data collected included: (1) time spent on instruction and on solving test questions, (2) mental effort during instruction and test, and (3) students' performance to identify anatomical structures in radiological images. Participants were 28 freshmen medical students (15 males and 13 females) and 208 biology students (190 females and 18 males). All studies used posttest-only control group design, and the collected data were analyzed by either t test or ANOVA. In self-directed computer-based environments, the strategies that used cross sections to improve students' ability to recognize anatomic structures in radiological images showed no significant positive effects. However, when increasing the complexity of the instructional materials, cross-sectional images imposed a higher cognitive load, as indicated by higher investment of mental effort. There is not enough evidence to claim that the simultaneous combination of cross sections and radiological images has no effect on the identification of anatomical structures in radiological images for novices. Further research that control for students' learning and cognitive style is needed to reach an informative conclusion.

EUCOLEUS BOEHMI INFECTION IN THE NASAL CONCHAE AND PARANASAL SINUSES OF RED FOX (VULPES VULPES) ON PRINCE EDWARD ISLAND, CANADA.

PubMed

Lopez, Alfonso; Aburto, Enrique; Jones, Kathleen; Robbins, William; Conboy, Gary

2016-04-28

Eucoleus boehmi (Nematoda: Capillariidae) occurs in the nasal conchae and paranasal sinuses of wild and domestic canids. We surveyed the red fox ( Vulpes vulpes ) on Prince Edward Island, Canada, for E. boehmi infection and characterized the associated histopathology. Nasal capillarid infections were detected based on histologic examination of three coronal sections of the nasal cavity and by centrifugal flotation examination (CFE) of rectal feces. Capillarids were detected in histologic sections in 28 of 36 (78%) foxes; detection occurred most frequently in the caudal section (28 foxes) and least in the rostral section (10 foxes). Adult worm morphology was typical for capillarids (stichosome esophagus, bacillary bands, bipolar plugged eggs); E. boehmi eggs were specifically identified based on the characteristic pitted shell wall surface. Adult worms were detected in histologic sections in all 28 and E. boehmi eggs in 21 of the positive foxes. No eggs of Eucoleus aerophilus were observed in any of the sections. Affected foxes had an eosinophilic and lymphoplasmacytic rhinitis with goblet cell hyperplasia. Eggs of E. aerophilus were detected on CFE in 20 of 36 (56%) foxes; 19 of the histologically positive foxes were coinfected with E. aerophilus. Eggs of E. boehmi were detected on CFE in 26 of 36 (72%) foxes and were consistent in size and morphology with those described from wild canids, but they differed from those reported from cases of infection in dogs. Prevalence based on identification of eggs on histologic section or CFE indicated 27 of 36 (75%) red foxes examined were infected with E. boehmi.

Reactive Distillation for Esterification of Bio-based Organic Acids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fields, Nathan; Miller, Dennis J.; Asthana, Navinchandra S.

2008-09-23

The following is the final report of the three year research program to convert organic acids to their ethyl esters using reactive distillation. This report details the complete technical activities of research completed at Michigan State University for the period of October 1, 2003 to September 30, 2006, covering both reactive distillation research and development and the underlying thermodynamic and kinetic data required for successful and rigorous design of reactive distillation esterification processes. Specifically, this project has led to the development of economical, technically viable processes for ethyl lactate, triethyl citrate and diethyl succinate production, and on a larger scalemore » has added to the overall body of knowledge on applying fermentation based organic acids as platform chemicals in the emerging biorefinery. Organic acid esters constitute an attractive class of biorenewable chemicals that are made from corn or other renewable biomass carbohydrate feedstocks and replace analogous petroleum-based compounds, thus lessening U.S. dependence on foreign petroleum and enhancing overall biorefinery viability through production of value-added chemicals in parallel with biofuels production. Further, many of these ester products are candidates for fuel (particularly biodiesel) components, and thus will serve dual roles as both industrial chemicals and fuel enhancers in the emerging bioeconomy. The technical report from MSU is organized around the ethyl esters of four important biorenewables-based acids: lactic acid, citric acid, succinic acid, and propionic acid. Literature background on esterification and reactive distillation has been provided in Section One. Work on lactic acid is covered in Sections Two through Five, citric acid esterification in Sections Six and Seven, succinic acid in Section Eight, and propionic acid in Section Nine. Section Ten covers modeling of ester and organic acid vapor pressure properties using the SPEAD (Step Potential Equilibrium and Dynamics) method.« less

FIGO stage IIIC endometrial cancer identification among patients with complex atypical hyperplasia, grade 1 and 2 endometrioid endometrial cancer: laparoscopic indocyanine green sentinel lymph node mapping versus frozen section of the uterus, why get around the problem?

PubMed

Papadia, Andrea; Gasparri, Maria Luisa; Siegenthaler, Franziska; Imboden, Sara; Mohr, Stefan; Mueller, Michael D

2017-03-01

To compare two surgical strategies used to identify lymph node metastases in patients with preoperative diagnosis of complex atypical hyperplasia (CAH), grade 1 and 2 endometrial cancer (EC). Data on patients with preoperative diagnosis of CAH, grade 1 and 2 EC undergoing laparoscopic indocyanine green (ICG) sentinel lymph node (SLN) mapping followed by frozen section of the uterus were collected. When risk factors were identified at frozen section, patients were subjected to a systematic lymphadenectomy. False negative (FN) rates, negative predictive values (NPV), positive predictive values (PPV) and correlation with stage IIIC EC were calculated for the systematic lymphadenectomy based on frozen section of the uterus and for the SLN mapping. Six (9.5%) out of 63 patients had lymph nodal metastases. Based on frozen section of the uterus, 22 (34.9%) and 15 (22.2%) patients underwent a pelvic and a pelvic and paraaortic lymphadenectomy, respectively. Five patients with stage IIIC disease were identified with a FN rate of 16.7% and a NPV and PPV of 97.6 and 27.3%, respectively. Overall and bilateral detection rates of ICG SLN mapping were 100 and 97.6%, respectively; no FN were recorded. The identification of patients with stage IIIC disease with ICG SLN mapping showed a NPV and PPV of 100%. Correlation between indication to lymphadenectomy and stage IIIC disease was poor (κ = 0.244) when based on frozen section of the uterus and excellent (κ = 1) when based on SLN mapping. ICG SLN mapping reduces the number of unnecessary systematic lymphadenectomies and the risk of underdiagnosing patients with metastatic lymph nodes.

"Clinical brain profiling": a neuroscientific diagnostic approach for mental disorders.

PubMed

Peled, Abraham; Geva, Amir B

2014-10-01

Clinical brain profiling is an attempt to map a descriptive nosology in psychiatry to underlying constructs in neurobiology and brain dynamics. This paper briefly reviews the motivation behind clinical brain profiling (CBP) and presents some provisional validation using clinical assessments and meta-analyses of neuroscientific publications. The paper has four sections. In the first, we review the nature and motivation for clinical brain profiling. This involves a description of the key aspects of functional anatomy that can lead to psychopathology. These features constitute the dimensions or categories for a profile of brain disorders based upon pathophysiology. The second section describes a mapping or translation matrix that maps from symptoms and signs, of a descriptive sort, to the CBP dimensions that provide a more mechanistic explanation. We will describe how this mapping engenders archetypal diagnoses, referring readers to tables and figures. The third section addresses the construct validity of clinical brain profiling by establishing correlations between profiles based on clinical ratings of symptoms and signs under classical diagnostic categories with the corresponding profiles generated automatically using archetypal diagnoses. We then provide further validation by performing a cluster analysis on the symptoms and signs and showing how they correspond to the equivalent brain profiles based upon clinical and automatic diagnosis. In the fourth section, we address the construct validity of clinical brain profiling by looking for associations between pathophysiological mechanisms (such as connectivity and plasticity) and nosological diagnoses (such as schizophrenia and depression). Based upon the mechanistic perspective offered in the first section, we test some particular hypotheses about double dissociations using a meta-analysis of PubMed searches. The final section concludes with perspectives for the future and outstanding validation issues for clinical brain profiling. Copyright © 2014 Elsevier Ltd. All rights reserved.

Contact Information Regarding Products - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You UTGPS (GPS-based UT1-like quantity). Astronomy Products Astronomical phenomena, astronomical data

Guidelines for psychosocial interventions in addictive disorders in India: An introduction and overview.

PubMed

Murthy, Pratima

2018-02-01

While guidelines for psychosocial interventions in addictive disorders in India were earlier rooted in clinical experience and global empirical evidence, recently there have been efforts to develop guidelines for intervention based on the local needs assessments of specific populations and more appreciably, a testing of the effectiveness of the interventions. This supplement on psychosocial interventions for addictive disorders covers some of the important aspects of psychosocial interventions in five sections. Section I covers the general principles of management and specific assessment approaches, screening for cognitive dysfunction and assessment of co-morbidities. Section II focuses on specific psychosocial interventions including brief interventions, relapse prevention, cognitive behavioural interventions, psychoanalytical interventions, cognitive rehabilitation, interventions in dual disorders, marital and family therapy, psychosocial interventions for sexual dysfunction and sexual addictions. Section III describes innovative approaches including third wave therapies, video-based relapse prevention, digital technology as a tool for psychosocial interventions as well as psychosocial interventions in technological addictions. The latter part of this section also deals with psychosocial interventions in special populations including children and adolescents, women, sexual minorities and the elderly. Section IV pans into community based psychosocial interventions including community camps and workplace prevention. The need to develop task sharing through the involvement of trained health workers to deliver community and home-based interventions is highlighted. Section V underscores the ethical issues in different aspects of psychosocial intervention and the need for research in this area. Although there is a tendency to formulate addiction in either biomedical or psychosocial terms and to view interventions either as pharmacological or psychosocial, these dichotomies neither exist in the affected individual's mind, nor should be present in the treating clinician. A comprehensive understanding of addiction requires an understanding of the person in his/her environment and needs a personalised holistic approach that addresses the diverse physical/mental health, occupational, legal, social and aftercare needs.

Competency-Based Adult Basic Education Manual for Level I (0-4.9) and Level II (5-8). A Training Manual for CBABE Instruction and Program Management.

ERIC Educational Resources Information Center

Singer, Elizabeth; And Others

This training manual was developed as a source of information about Competency-Based Adult Basic Education (CBABE) for administrators, counselors, and teachers involved in the implementation of a CBABE program. After section I provides an introduction to Brevard Community College's development of CBABE curricula, section II explains the purposes…

33 CFR 334.710 - The Narrows and Gulf of Mexico adjacent to Santa Rosa Island, Air Force Proving Ground Command...

Code of Federal Regulations, 2011 CFR

2011-07-01

... adjacent to Santa Rosa Island, Air Force Proving Ground Command, Eglin Air Force Base, Fla. 334.710 Section... Santa Rosa Island, Air Force Proving Ground Command, Eglin Air Force Base, Fla. (a) The restricted area... regulations in this section shall be enforced by the Commander, Air Force Proving Ground Command, Eglin Air...

Disposal Notifications and Quarterly Membership Updates for the Utility Solid Waste Group Members’ Risk-Based Approvals to Dispose of PCB Remediation Waste Under Title 40 of the Code of Federal Regulations Section 761.61(c)

EPA Pesticide Factsheets

Disposal Notifications and Quarterly Membership Updates for the Utility Solid Waste Group Members’ Risk-Based Approvals to Dispose of Polychlorinated Biphenyl (PCB) Remediation Waste Under Title 40 of the Code of Federal Regulations Section 761.61(c)

Evaluation of hydraulic conductivities calculated from multi-port permeameter measurements

USGS Publications Warehouse

Wolf, Steven H.; Celia, Michael A.; Hess, Kathryn M.

1991-01-01

A multiport permeameter was developed for use in estimating hydraulic conductivity over intact sections of aquifer core using the core liner as the permeameter body. Six cores obtained from one borehole through the upper 9 m of a stratified glacial-outwash aquifer were used to evaluate the reliability of the permeameter. Radiographs of the cores were used to assess core integrity and to locate 5- to 10-cm sections of similar grain size for estimation of hydraulic conductivity. After extensive testing of the permeameter, hydraulic conductivities were determined for 83 sections of the six cores. Other measurement techniques included permeameter measurements on repacked sections of core, estimates based on grain-size analyses, and estimates based on borehole flowmeter measurements. Permeameter measurements of 33 sections of core that had been extruded, homogenized, and repacked did not differ significantly from the original measurements. Hydraulic conductivities estimated from grain-size distributions were slightly higher than those calculated from permeameter measurements; the significance of the difference depended on the estimating equation used. Hydraulic conductivities calculated from field measurements, using a borehole flowmeter in the borehole from which the cores were extracted, were significantly higher than those calculated from laboratory measurements and more closely agreed with independent estimates of hydraulic conductivity based on tracer movement near the borehole. This indicates that hydraulic conductivities based on laboratory measurements of core samples may underestimate actual field hydraulic conductivities in this type of stratified glacial-outwash aquifer.

Section-Based Tree Species Identification Using Airborne LIDAR Point Cloud

NASA Astrophysics Data System (ADS)

Yao, C.; Zhang, X.; Liu, H.

2017-09-01

The application of LiDAR data in forestry initially focused on mapping forest community, particularly and primarily intended for largescale forest management and planning. Then with the smaller footprint and higher sampling density LiDAR data available, detecting individual tree overstory, estimating crowns parameters and identifying tree species are demonstrated practicable. This paper proposes a section-based protocol of tree species identification taking palm tree as an example. Section-based method is to detect objects through certain profile among different direction, basically along X-axis or Y-axis. And this method improve the utilization of spatial information to generate accurate results. Firstly, separate the tree points from manmade-object points by decision-tree-based rules, and create Crown Height Mode (CHM) by subtracting the Digital Terrain Model (DTM) from the digital surface model (DSM). Then calculate and extract key points to locate individual trees, thus estimate specific tree parameters related to species information, such as crown height, crown radius, and cross point etc. Finally, with parameters we are able to identify certain tree species. Comparing to species information measured on ground, the portion correctly identified trees on all plots could reach up to 90.65 %. The identification result in this research demonstrate the ability to distinguish palm tree using LiDAR point cloud. Furthermore, with more prior knowledge, section-based method enable the process to classify trees into different classes.

Combining plasma gasification and solid oxide cell technologies in advanced power plants for waste to energy and electric energy storage applications.

PubMed

Perna, Alessandra; Minutillo, Mariagiovanna; Lubrano Lavadera, Antonio; Jannelli, Elio

2018-03-01

The waste to energy (WtE) facilities and the renewable energy storage systems have a strategic role in the promotion of the "eco-innovation", an emerging priority in the European Union. This paper aims to propose advanced plant configurations in which waste to energy plants and electric energy storage systems from intermittent renewable sources are combined for obtaining more efficient and clean energy solutions in accordance with the "eco-innovation" approach. The advanced plant configurations consist of an electric energy storage (EES) section based on a solid oxide electrolyzer (SOEC), a waste gasification section based on the plasma technology and a power generation section based on a solid oxide fuel cell (SOFC). The plant configurations differ for the utilization of electrolytic hydrogen and oxygen in the plasma gasification section and in the power generation section. In the first plant configuration IAPGFC (Integrated Air Plasma Gasification Fuel Cell), the renewable oxygen enriches the air stream, that is used as plasma gas in the gasification section, and the renewable hydrogen is used to enrich the anodic stream of the SOFC in the power generation section. In the second plant configuration IHPGFC (Integrated Hydrogen Plasma Gasification Fuel Cell) the renewable hydrogen is used as plasma gas in the plasma gasification section, and the renewable oxygen is used to enrich the cathodic stream of the SOFC in the power generation section. The analysis has been carried out by using numerical models for predicting and comparing the systems performances in terms of electric efficiency and capability in realizing the waste to energy and the electric energy storage of renewable sources. Results have highlighted that the electric efficiency is very high for all configurations (35-45%) and, thanks to the combination with the waste to energy technology, the storage efficiencies are very attractive (in the range 72-92%). Copyright © 2017 Elsevier Ltd. All rights reserved.

Brachytherapy dosimetry of 125I and 103Pd sources using an updated cross section library for the MCNP Monte Carlo transport code.

PubMed

Bohm, Tim D; DeLuca, Paul M; DeWerd, Larry A

2003-04-01

Permanent implantation of low energy (20-40 keV) photon emitting radioactive seeds to treat prostate cancer is an important treatment option for patients. In order to produce accurate implant brachytherapy treatment plans, the dosimetry of a single source must be well characterized. Monte Carlo based transport calculations can be used for source characterization, but must have up to date cross section libraries to produce accurate dosimetry results. This work benchmarks the MCNP code and its photon cross section library for low energy photon brachytherapy applications. In particular, we calculate the emitted photon spectrum, air kerma, depth dose in water, and radial dose function for both 125I and 103Pd based seeds and compare to other published results. Our results show that MCNP's cross section library differs from recent data primarily in the photoelectric cross section for low energies and low atomic number materials. In water, differences as large as 10% in the photoelectric cross section and 6% in the total cross section occur at 125I and 103Pd photon energies. This leads to differences in the dose rate constant of 3% and 5%, and differences as large as 18% and 20% in the radial dose function for the 125I and 103Pd based seeds, respectively. Using a partially updated photon library, calculations of the dose rate constant and radial dose function agree with other published results. Further, the use of the updated photon library allows us to verify air kerma and depth dose in water calculations performed using MCNP's perturbation feature to simulate updated cross sections. We conclude that in order to most effectively use MCNP for low energy photon brachytherapy applications, we must update its cross section library. Following this update, the MCNP code system will be a very effective tool for low energy photon brachytherapy dosimetry applications.

View of building 18 section looking southeast. Jet Lowe, Haer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 18 section looking southeast. Jet Lowe, Haer staff photographer, summer 1995. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

Surface enhanced Raman scattering spectroscopic waveguide

DOEpatents

Lascola, Robert J; McWhorter, Christopher S; Murph, Simona H

2015-04-14

A waveguide for use with surface-enhanced Raman spectroscopy is provided that includes a base structure with an inner surface that defines a cavity and that has an axis. Multiple molecules of an analyte are capable of being located within the cavity at the same time. A base layer is located on the inner surface of the base structure. The base layer extends in an axial direction along an axial length of an excitation section. Nanoparticles are carried by the base layer and may be uniformly distributed along the entire axial length of the excitation section. A flow cell for introducing analyte and excitation light into the waveguide and a method of applying nanoparticles may also be provided.

Indications and determinants of caesarean section delivery: Evidence from a population-based study in Matlab, Bangladesh.

PubMed

Begum, Tahmina; Rahman, Aminur; Nababan, Herfina; Hoque, Dewan Md Emdadul; Khan, Al Fazal; Ali, Taslim; Anwar, Iqbal

2017-01-01

Caesarean section (C-section) is a major obstetric intervention for saving lives of women and their newborns from pregnancy and childbirth related complications. Un-necessary C-sections may have adverse impact upon maternal and neonatal outcomes. In Bangladesh there is paucity of data on clinical indication of C-section at population level. We conducted a retrospective study in icddr,b Health and Demographic Surveillance System (HDSS) area of Matlab to look into the indications and determinants of C-sections. All resident women in HDSS service area who gave birth in 2013 with a known birth outcome, were included in the study. Women who underwent C-section were identified from birth and pregnancy files of HDSS and their indication for C-section were collected reviewing health facility records where the procedure took place, supplemented by face-to-face interview of mothers where data were missing. Indications of C-section were presented as frequency distribution and further divided into different groups following 3 distinct classification systems. Socio-demographic predictors were explored following statistical method of binary logistic regression. During 2013, facility delivery rate was 84% and population based C-section rate was 35% of all deliveries in icddr,b service area. Of all C-sections, only 1.4% was conducted for Absolute Maternal Indications (AMIs). Major indications of C-sections included: repeat C-section (24%), foetal distress (21%), prolonged labour (16%), oligohydramnios (14%) and post-maturity (13%). More than 80% C-sections were performed in for-profit private facilities. Probability of C-section delivery increased with improved socio-economic status, higher education, lower birth order, higher age, and with more number of Antenatal Care use and presence of bad obstetric history. Eight maternal deaths occurred, of which five were delivered by C-section. C-section rate in this area was much higher than national average as well as global recommendations. Very few of C-sections were undertaken for AMIs. Routine monitoring of clinical indication of C-section in public and private facilities is needed to ensure rational use of the procedure.

Indications and determinants of caesarean section delivery: Evidence from a population-based study in Matlab, Bangladesh

PubMed Central

Begum, Tahmina; Nababan, Herfina; Hoque, Dewan Md. Emdadul; Khan, Al Fazal; Ali, Taslim; Anwar, Iqbal

2017-01-01

Background and methods Caesarean section (C-section) is a major obstetric intervention for saving lives of women and their newborns from pregnancy and childbirth related complications. Un-necessary C-sections may have adverse impact upon maternal and neonatal outcomes. In Bangladesh there is paucity of data on clinical indication of C-section at population level. We conducted a retrospective study in icddr,b Health and Demographic Surveillance System (HDSS) area of Matlab to look into the indications and determinants of C-sections. All resident women in HDSS service area who gave birth in 2013 with a known birth outcome, were included in the study. Women who underwent C-section were identified from birth and pregnancy files of HDSS and their indication for C-section were collected reviewing health facility records where the procedure took place, supplemented by face-to-face interview of mothers where data were missing. Indications of C-section were presented as frequency distribution and further divided into different groups following 3 distinct classification systems. Socio-demographic predictors were explored following statistical method of binary logistic regression. Findings During 2013, facility delivery rate was 84% and population based C-section rate was 35% of all deliveries in icddr,b service area. Of all C-sections, only 1.4% was conducted for Absolute Maternal Indications (AMIs). Major indications of C-sections included: repeat C-section (24%), foetal distress (21%), prolonged labour (16%), oligohydramnios (14%) and post-maturity (13%). More than 80% C-sections were performed in for-profit private facilities. Probability of C-section delivery increased with improved socio-economic status, higher education, lower birth order, higher age, and with more number of Antenatal Care use and presence of bad obstetric history. Eight maternal deaths occurred, of which five were delivered by C-section. Conclusions C-section rate in this area was much higher than national average as well as global recommendations. Very few of C-sections were undertaken for AMIs. Routine monitoring of clinical indication of C-section in public and private facilities is needed to ensure rational use of the procedure. PMID:29155840

Optical sectioning in wide-field microscopy obtained by dynamic structured light illumination and detection based on a smart pixel detector array.

PubMed

Mitić, Jelena; Anhut, Tiemo; Meier, Matthias; Ducros, Mathieu; Serov, Alexander; Lasser, Theo

2003-05-01

Optical sectioning in wide-field microscopy is achieved by illumination of the object with a continuously moving single-spatial-frequency pattern and detecting the image with a smart pixel detector array. This detector performs an on-chip electronic signal processing that extracts the optically sectioned image. The optically sectioned image is directly observed in real time without any additional postprocessing.

Boric acid-enhanced embedding medium for cryomicrotomy.

PubMed

Lim, Jin Ik; Park, Hun-Kuk

2012-05-01

A polyvinyl alcohol (PVA)/polyethylene glycol (PEG)-based resin is commonly used as a cryoembedding medium for the histological analysis of frozen tissue sections. However, it is not easy to obtain sufficient numbers of satisfactory reproducible sections owing to the differences between the mechanical properties of the medium and embedded tissue and the low cohesive force of the medium. We describe a modified PVA-based cryoembedding medium, composed of PVA (10wt% and 15wt%) with the addition of boric acid (from 0 to 5wt%), that can improve the sectioning properties and efficiency of frozen tissue for histological analysis. The amount of load under the same compressive displacement as well as cohesive force increased with increasing boric acid and PVA contents. 15wt% PVA and 3wt% boric acid was determined as an optimal composition for cryoembedding material based on the sectioning efficiency measured by the numbers of unimpaired sectioned slices and the amount of load under the same compressive displacement test. On the basis of the results of routine hematoxylin and eosin staining of cryosections of tissue embedded in a medium with 3wt% boric acid and PVA, it was concluded that the modified PVA cryoembedding medium can improve the efficiency of cryosectioning for subsequent histological or histochemical analysis of various tissues. Copyright © 2011 Elsevier GmbH. All rights reserved.

Environment assisted degradation mechanisms in aluminum-lithium alloys

NASA Technical Reports Server (NTRS)

Gangloff, Richard P.; Stoner, Glenn E.; Swanson, Robert E.

1988-01-01

Section 1 of this report records the progress achieved on NASA-LaRC Grant NAG-1-745 (Environment Assisted Degradation Mechanisms in Al-Li Alloys), and is based on research conducted during the period April 1 to November 30, 1987. A discussion of work proposed for the project's second year is included. Section 2 provides an overview of the need for research on the mechanisms of environmental-mechanical degradation of advanced aerospace alloys based on aluminum and lithium. This research is to provide NASA with the basis necessary to permit metallurgical optimization of alloy performance and engineering design with respect to damage tolerance, long term durability and reliability. Section 3 reports on damage localization mechanisms in aqueous chloride corrosion fatigue of aluminum-lithium alloys. Section 4 reports on progress made on measurements and mechanisms of localized aqueous corrosion in aluminum-lithium alloys. Section 5 provides a detailed technical proposal for research on environmental degradation of Al-Li alloys, and the effect of hydrogen in this.

Lateral mixing in the Mississippi River below the confluence with the Ohio River

USGS Publications Warehouse

Rathbun, R.E.; Rostad, C.E.

2004-01-01

Lateral dispersion coefficients for two dispersants were determined for three sections of the Mississippi River below the confluence with the Ohio River. The dispersants were the specific conductance and an industrial organic compound (trimethyltriazinetrione). Three models based on the stream tube concept were used, and lateral dispersion coefficients computed from these models were comparable. Coefficients for the two dispersants also were comparable. Lateral dispersion coefficients were consistent with expectations based on the characteristics of the river sections. Overall average values were 0.444 m2/s for a relatively straight section of river, 1.69 m2/s for a section containing two sharp bends, and 2.22 m2/s for a long section containing four sharp bends and several small islands. The lateral dispersion coefficients measured for the Mississippi River are consistent with literature data and a water discharge relation. Results of this study provide lateral dispersion coefficients for a water discharge not previously reported in the literature as well as new values for the Mississippi River.

Multigroup cross section library for GFR2400

NASA Astrophysics Data System (ADS)

Čerba, Štefan; Vrban, Branislav; Lüley, Jakub; Haščík, Ján; Nečas, Vladimír

2017-09-01

In this paper the development and optimization of the SBJ_E71 multigroup cross section library for GFR2400 applications is discussed. A cross section processing scheme, merging Monte Carlo and deterministic codes, was developed. Several fine and coarse group structures and two weighting flux options were analysed through 18 benchmark experiments selected from the handbook of ICSBEP and based on performed similarity assessments. The performance of the collapsed version of the SBJ_E71 library was compared with MCNP5 CE ENDF/B VII.1 and the Korean KAFAX-E70 library. The comparison was made based on integral parameters of calculations performed on full core homogenous models.

Microgravity and Materials Processing Facility study (MMPF): Requirements and Analyses of Commercial Operations (RACO) preliminary data release

NASA Technical Reports Server (NTRS)

1988-01-01

This requirements and analyses of commercial operations (RACO) study data release reflects the current status of research activities of the Microgravity and Materials Processing Facility under Modification No. 21 to NASA/MSFC Contract NAS8-36122. Section 1 includes 65 commercial space processing projects suitable for deployment aboard the Space Station. Section 2 contains reports of the R:BASE (TM) electronic data base being used in the study, synopses of the experiments, and a summary of data on the experimental facilities. Section 3 is a discussion of video and data compression techniques used as well as a mission timeline analysis.

Comparison of the Joel-Cohen-based technique and the transverse Pfannenstiel for caesarean section for safety and effectiveness: A systematic review and meta-analysis

PubMed Central

Olyaeemanesh, Alireza; Bavandpour, Elahe; Mobinizadeh, Mohammadreza; Ashrafinia, Mansoor; Bavandpour, Maryam; Nouhi, Mojtaba

2017-01-01

Background: Caesarean section (C-section) is the most common surgery among women worldwide, and the global rate of this surgical procedure has been continuously rising. Hence, it is significantly crucial to develop and apply highly effective and safe caesarean section techniques. In this review study, we aimed at assessing the safety and effectiveness of the Joel-Cohen-based technique and comparing the results with the transverse Pfannenstiel incision for C-section. Methods: In this study, various reliable databases such as the PubMed Central, COCHRANE, DARE, and Ovid MEDLINE were targeted. Reviews, systematic reviews, and randomized clinical trial studies comparing the Joel-Cohen-based technique and the transverse Pfannenstiel incision were selected based on the inclusion criteria. Selected studies were checked by 2 independent reviewers based on the inclusion criteria, and the quality of these studies was assessed. Then, their data were extracted and analyzed. Results: Five randomized clinical trial studies met the inclusion criteria. According to the exiting evidence, statistical results of the Joel-Cohen-based technique showed that this technique is more effective compared to the transverse Pfannenstiel incision. Metaanalysis results of the 3 outcomes were as follow: operation time (5 trials, 764 women; WMD -9.78; 95% CI:-14.49-5.07 minutes, p<0.001), blood loss (3 trials, 309 women; WMD -53.23ml; 95% –CI: 90.20-16.26 ml, p= 0.004), and post-operative hospital stay (3 trials, 453 women; WMD -.69 day; 95% CI: 1.4-0.03 day, p<0.001). Statistical results revealed a significant difference between the 2 techniques. Conclusion: According to the literature, despite having a number of side effects, the Joel-Cohen-based technique is generally more effective than the Pfannenstiel incision technique. In addition, it was recommended that the Joel-Cohen-based technique be used as a replacement for the Pfannenstiel incision technique according to the surgeons’ preferences and the patients’ conditions. PMID:29445683

Resolved discrepancies between visible spontaneous Raman cross-section and direct near-infrared Raman gain measurements in TeO2-based glasses.

PubMed

Rivero, Clara; Stegeman, Robert; Couzi, Michel; Talaga, David; Cardinal, Thierry; Richardson, Kathleen; Stegeman, George

2005-06-13

Disagreements on the Raman gain response of different tellurite-based glasses, measured at different wavelengths, have been recently reported in the literature. In order to resolve this controversy, a multi-wavelength Raman cross-section experiment was conducted on two different TeO2-based glass samples. The estimated Raman gain response of the material shows good agreement with the directly-measured Raman gain data at 1064 nm, after correction for the dispersion and wavelength-dependence of the Raman gain process.

Computational analysis of water entry of a circular section at constant velocity based on Reynold's averaged Navier-Stokes method

NASA Astrophysics Data System (ADS)

Uddin, M. Maruf; Fuad, Muzaddid-E.-Zaman; Rahaman, Md. Mashiur; Islam, M. Rabiul

2017-12-01

With the rapid decrease in the cost of computational infrastructure with more efficient algorithm for solving non-linear problems, Reynold's averaged Navier-Stokes (RaNS) based Computational Fluid Dynamics (CFD) has been used widely now-a-days. As a preliminary evaluation tool, CFD is used to calculate the hydrodynamic loads on offshore installations, ships, and other structures in the ocean at initial design stages. Traditionally, wedges have been studied more than circular cylinders because cylinder section has zero deadrise angle at the instant of water impact, which increases with increase of submergence. In Present study, RaNS based commercial code ANSYS Fluent is used to simulate the water entry of a circular section at constant velocity. It is seen that present computational results were compared with experiment and other numerical method.

Statistical analysis of passenger-crowding in bus transport network of Harbin

NASA Astrophysics Data System (ADS)

Hu, Baoyu; Feng, Shumin; Li, Jinyang; Zhao, Hu

2018-01-01

Passenger flow data is indispensable but rare in the study of public transport networks. In this study, we focus on the passenger-crowding characteristics of the bus transport network of Harbin (BTN-H) based on passenger flow investigation. The three frequency histograms for all the uplinks and downlinks in Harbin are presented, including passengers on the bus at each section, crowding coefficients, and position parameters of crowded sections. The differences in crowding position are analyzed on each route. The distributions of degree and crowding degree (in directed space L) follow an exponential law. The new finding indicates that there are many stations with few crowded sections and a few stations with many crowded sections. The distributions of path length and crowded length (in directed space P) are presented based on the minimum transfer times, and it is found that they can be fitted by a composite Gaussian function and a Gaussian function, respectively. The stations and paths can be divided into three crowd levels. We conclude that BTN-H is crowded from a network-based perspective.

76 FR 24421 - Approval and Promulgation of Air Quality Implementation Plans; New Mexico; Section 110(a)(2...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... approval based on the November 2, 1988, approval of New Mexico's stack height regulations (53 FR 44191), at.... Guy Donaldson, Chief, Air Planning Section (6PD- L), Environmental Protection Agency, 1445 Ross Avenue... Section (6PD-L), Environmental Protection Agency, 1445 Ross Avenue, Suite 1200, Dallas, Texas 75202-2733...

1. Photographic copy of engineering drawing showing elevations and sections ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Photographic copy of engineering drawing showing elevations and sections of Test Stand 'E' (Building 4259/E-60). California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Solid Propellant Test Stand E-60 - Elevations & Sections,' sheet E60/10, no date. - Jet Propulsion Laboratory Edwards Facility, Test Stand E, Edwards Air Force Base, Boron, Kern County, CA

26 CFR 4.954-1 - Foreign base company income; taxable years beginning after December 31, 1986.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) TEMPORARY INCOME TAX REGULATIONS UNDER SECTION... the rules of section 952 and the regulations thereunder. Subpart F income is included in the gross... and the regulations thereunder, and thus is subject to current taxation under section 1 or 11 of the...

12 CFR Appendix B to Part 3 - Risk-Based Capital Guidelines; Market Risk

Code of Federal Regulations, 2013 CFR

2013-01-01

... Specific Risk Section 11Simplified Supervisory Formula Approach Section 12Market Risk Disclosures Section 1... respect to a company means any company that controls, is controlled by, or is under common control with... organization. Control A person or company controls a company if it: (1) Owns, controls, or holds with power to...

U.S. Department of Energy facilities needed to advance nuclear power.

PubMed

Ahearne, John F

2011-01-01

This talk is based upon a November 2008 report by the U.S. Department of Energy (DOE) Nuclear Energy Advisory Committee (NEAC). The report has two parts, a policy section and a technology section. Here extensive material from the Technical Subcommittee section of the NEAC report is used. Copyright © 2010 Health Physics Society

Section 508 Standards Resources

EPA Pesticide Factsheets

Learn which software applications, operating systems, web-based applications, and other electronic and information technology (EIT) products are covered by Section 508 of the Rehabilitation Act; and resources for making sure your EIT products are compliant

24 CFR 402.5 - Contract renewals under section 524(b) or (e) of MAHRA.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Reengineering demonstration authority for which HUD made a determination that debt restructuring is... RESTRUCTURING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SECTION 8 PROJECT-BASED CONTRACT RENEWAL UNDER...

24 CFR 402.5 - Contract renewals under section 524(b) or (e) of MAHRA.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Reengineering demonstration authority for which HUD made a determination that debt restructuring is... RESTRUCTURING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SECTION 8 PROJECT-BASED CONTRACT RENEWAL UNDER...

24 CFR 402.5 - Contract renewals under section 524(b) or (e) of MAHRA.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Reengineering demonstration authority for which HUD made a determination that debt restructuring is... RESTRUCTURING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SECTION 8 PROJECT-BASED CONTRACT RENEWAL UNDER...

24 CFR 402.5 - Contract renewals under section 524(b) or (e) of MAHRA.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Reengineering demonstration authority for which HUD made a determination that debt restructuring is... RESTRUCTURING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SECTION 8 PROJECT-BASED CONTRACT RENEWAL UNDER...

24 CFR 402.5 - Contract renewals under section 524(b) or (e) of MAHRA.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Reengineering demonstration authority for which HUD made a determination that debt restructuring is... RESTRUCTURING, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SECTION 8 PROJECT-BASED CONTRACT RENEWAL UNDER...

Bus bar electrical feedthrough for electrorefiner system

DOEpatents

Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

2013-12-03

A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

Quantum Cascade Laser-Based Infrared Microscopy for Label-Free and Automated Cancer Classification in Tissue Sections.

PubMed

Kuepper, Claus; Kallenbach-Thieltges, Angela; Juette, Hendrik; Tannapfel, Andrea; Großerueschkamp, Frederik; Gerwert, Klaus

2018-05-16

A feasibility study using a quantum cascade laser-based infrared microscope for the rapid and label-free classification of colorectal cancer tissues is presented. Infrared imaging is a reliable, robust, automated, and operator-independent tissue classification method that has been used for differential classification of tissue thin sections identifying tumorous regions. However, long acquisition time by the so far used FT-IR-based microscopes hampered the clinical translation of this technique. Here, the used quantum cascade laser-based microscope provides now infrared images for precise tissue classification within few minutes. We analyzed 110 patients with UICC-Stage II and III colorectal cancer, showing 96% sensitivity and 100% specificity of this label-free method as compared to histopathology, the gold standard in routine clinical diagnostics. The main hurdle for the clinical translation of IR-Imaging is overcome now by the short acquisition time for high quality diagnostic images, which is in the same time range as frozen sections by pathologists.

Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development and Performance Analysis

NASA Technical Reports Server (NTRS)

Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan; Kirchner, Robert; Engel, Carl D.

2014-01-01

The Space Launch System (SLS) base heating test is broken down into two test programs: (1) Pathfinder and (2) Main Test. The Pathfinder Test Program focuses on the design, development, hot-fire test and performance analyses of the 2% sub-scale SLS core-stage and booster element propulsion systems. The core-stage propulsion system is composed of four gaseous oxygen/hydrogen RS-25D model engines and the booster element is composed of two aluminum-based model solid rocket motors (SRMs). The first section of the paper discusses the motivation and test facility specifications for the test program. The second section briefly investigates the internal flow path of the design. The third section briefly shows the performance of the model RS-25D engines and SRMs for the conducted short duration hot-fire tests. Good agreement is observed based on design prediction analysis and test data. This program is a challenging research and development effort that has not been attempted in 40+ years for a NASA vehicle.

Systematic review of Kinect applications in elderly care and stroke rehabilitation

PubMed Central

2014-01-01

In this paper we present a review of the most current avenues of research into Kinect-based elderly care and stroke rehabilitation systems to provide an overview of the state of the art, limitations, and issues of concern as well as suggestions for future work in this direction. The central purpose of this review was to collect all relevant study information into one place in order to support and guide current research as well as inform researchers planning to embark on similar studies or applications. The paper is structured into three main sections, each one presenting a review of the literature for a specific topic. Elderly Care section is comprised of two subsections: Fall detection and Fall risk reduction. Stroke Rehabilitation section contains studies grouped under Evaluation of Kinect’s spatial accuracy, and Kinect-based rehabilitation methods. The third section, Serious and exercise games, contains studies that are indirectly related to the first two sections and present a complete system for elderly care or stroke rehabilitation in a Kinect-based game format. Each of the three main sections conclude with a discussion of limitations of Kinect in its respective applications. The paper concludes with overall remarks regarding use of Kinect in elderly care and stroke rehabilitation applications and suggestions for future work. A concise summary with significant findings and subject demographics (when applicable) of each study included in the review is also provided in table format. PMID:24996956

A screened independent atom model for the description of ion collisions from atomic and molecular clusters

NASA Astrophysics Data System (ADS)

Lüdde, Hans Jürgen; Horbatsch, Marko; Kirchner, Tom

2018-05-01

We apply a recently introduced model for an independent-atom-like calculation of ion-impact electron transfer and ionization cross sections to proton collisions from water, neon, and carbon clusters. The model is based on a geometrical interpretation of the cluster cross section as an effective area composed of overlapping circular disks that are representative of the atomic contributions. The latter are calculated using a time-dependent density-functional-theory-based single-particle description with accurate exchange-only ground-state potentials. We find that the net capture and ionization cross sections in p-X n collisions are proportional to n α with 2/3 ≤ α ≤ 1. For capture from water clusters at 100 keV impact energy α is close to one, which is substantially different from the value α = 2/3 predicted by a previous theoretical work based on the simplest-level electron nuclear dynamics method. For ionization at 100 keV and for capture at lower energies we find smaller α values than for capture at 100 keV. This can be understood by considering the magnitude of the atomic cross sections and the resulting overlaps of the circular disks that make up the cluster cross section in our model. Results for neon and carbon clusters confirm these trends. Simple parametrizations are found which fit the cross sections remarkably well and suggest that they depend on the relevant bond lengths.

Limit states and reliability-based pipeline design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zimmerman, T.J.E.; Chen, Q.; Pandey, M.D.

1997-06-01

This report provides the results of a study to develop limit states design (LSD) procedures for pipelines. Limit states design, also known as load and resistance factor design (LRFD), provides a unified approach to dealing with all relevant failure modes combinations of concern. It explicitly accounts for the uncertainties that naturally occur in the determination of the loads which act on a pipeline and in the resistance of the pipe to failure. The load and resistance factors used are based on reliability considerations; however, the designer is not faced with carrying out probabilistic calculations. This work is done during developmentmore » and periodic updating of the LSD document. This report provides background information concerning limits states and reliability-based design (Section 2), gives the limit states design procedures that were developed (Section 3) and provides results of the reliability analyses that were undertaken in order to partially calibrate the LSD method (Section 4). An appendix contains LSD design examples in order to demonstrate use of the method. Section 3, Limit States Design has been written in the format of a recommended practice. It has been structured so that, in future, it can easily be converted to a limit states design code format. Throughout the report, figures and tables are given at the end of each section, with the exception of Section 3, where to facilitate understanding of the LSD method, they have been included with the text.« less

The Effect of Rare-Earth Metals on Cast Steels

DTIC Science & Technology

1954-04-01

as the 1-inch section is also illustrated in Figure 23 and consists of tempered bainite and tempered martensite. Both of the control steels (AE-1...section Tempered bainite and tempered martensite 4 inch section Figure 23 Microstructure ol the Mn-Cr-Mo base control steels . Etched with... bainite 4-inch Section Figure 25—Microstructures of the MnCr-Mo + Rare Earths f B cast steels . Etched with picral, SOOX - .1 €. Figure 26

Indirect fluorometric detection techniques on thin layer chromatography and effect of ultrasound on gel electrophoresis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yinfa, Ma.

Thin-layer chromatography (TLC) is a broadly applicable separation technique. It offers many advantages over high performance liquid chromatography (HPLC), such as easily adapted for two-dimensional separation, for whole-column'' detection and for handling multiple samples, etc. However, due to its draggy development of detection techniques comparing with HPLC, TLC has not received the attention it deserves. Therefore, exploring new detection techniques is very important to the development of TLC. It is the principal of this dissertation to present a new detection method for TLC -- indirect fluorometric detection method. This detection technique is universal sensitive, nondestructive, and simple. This will bemore » described in detail from Sections 1 through Section 5. Section 1 and 3 describe the indirect fluorometric detection of anions and nonelectrolytes in TLC. In Section 2, a detection method for cations based on fluorescence quenching of ethidium bromide is presented. In Section 4, a simple and interesting TLC experiment is designed, three different fluorescence detection principles are used for the determination of caffeine, saccharin and sodium benzoate in beverages. A laser-based indirect fluorometric detection technique in TLC is developed in Section 5. Section 6 is totally different from Sections 1 through 5. An ultrasonic effect on the separation of DNA fragments in agarose gel electrophoresis is investigated. 262 refs.« less

Histological methods to determine blood flow distribution with fluorescent microspheres.

PubMed

Luchtel, D L; Boykin, J C; Bernard, S L; Glenny, R W

1998-11-01

We evaluated several histological methods and determined their advantages and disadvantages for histological studies of tissues and organs perfused with fluorescent microspheres. Microspheres retained their fluorescence in 7-10 microm serial sections with a change in the antimedium from toluene when samples were fixed in formalin and embedded in paraffin. Several antimedia allowed both wax infiltration of tissue and preservation of microsphere fluorescence. Histoclear II was the best substitute for toluene. When samples were fixed in formalin and embedded in glycol methacrylate, thinner (3-5 microm) sections provided greater histological detail but had fewer microspheres per section. Air dried lung tissue followed by Vibratome sectioning provided thick sections (100 microm) that facilitated rapid survey of large volumes of tissue for microspheres but limited histological detail, and the air drying procedure was restricted to lung tissue. Samples fixed in formalin followed by Vibratome sectioning of unembedded tissue provided better histological detail of lung tissue and was also useful for other organs. These sections were more difficult to handle and to mount on slides compared to air dried tissue, whereas fixed tissue embedded in gelatin provided better tissue support for Vibratome sectioning. Rapid freezing followed by cryo-microtome sectioning resulted in frozen sections that were relatively difficult to handle compared to embedded or unembedded tissue; they also deteriorated relatively rapidly with time. Paraffin sections were stained with hematoxylin and eosin or with aqueous methyl green, although tissue autofluorescence by itself was usually sufficient to identify histological features. Methacrylate sections quenched tissue autofluorescence, and Lee's stain or Richardson's stain were used for staining sections. Toluene based mountants such as Cytoseal quenched fluorescence, particularly the red fluorescent microspheres. Aqueous based mountants such as Aquamount, Crystal/Mount, Fluoromount-G were substituted, although such preparations were not as permanent as Cytoseal mounted coverglasses and tended to cause fading of stained sections.

Attenuation-based estimation of patient size for the purpose of size specific dose estimation in CT. Part II. Implementation on abdomen and thorax phantoms using cross sectional CT images and scanned projection radiograph images

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang Jia; Christner, Jodie A.; Duan Xinhui

2012-11-15

Purpose: To estimate attenuation using cross sectional CT images and scanned projection radiograph (SPR) images in a series of thorax and abdomen phantoms. Methods: Attenuation was quantified in terms of a water cylinder with cross sectional area of A{sub w} from both the CT and SPR images of abdomen and thorax phantoms, where A{sub w} is the area of a water cylinder that would absorb the same dose as the specified phantom. SPR and axial CT images were acquired using a dual-source CT scanner operated at 120 kV in single-source mode. To use the SPR image for estimating A{sub w},more » the pixel values of a SPR image were calibrated to physical water attenuation using a series of water phantoms. A{sub w} and the corresponding diameter D{sub w} were calculated using the derived attenuation-based methods (from either CT or SPR image). A{sub w} was also calculated using only geometrical dimensions of the phantoms (anterior-posterior and lateral dimensions or cross sectional area). Results: For abdomen phantoms, the geometry-based and attenuation-based methods gave similar results for D{sub w}. Using only geometric parameters, an overestimation of D{sub w} ranging from 4.3% to 21.5% was found for thorax phantoms. Results for D{sub w} using the CT image and SPR based methods agreed with each other within 4% on average in both thorax and abdomen phantoms. Conclusions: Either the cross sectional CT or SPR images can be used to estimate patient attenuation in CT. Both are more accurate than use of only geometrical information for the task of quantifying patient attenuation. The SPR based method requires calibration of SPR pixel values to physical water attenuation and this calibration would be best performed by the scanner manufacturer.« less

Multi-stained whole slide image alignment in digital pathology

NASA Astrophysics Data System (ADS)

Déniz, Oscar; Toomey, David; Conway, Catherine; Bueno, Gloria

2015-03-01

In Digital Pathology, one of the most simple and yet most useful feature is the ability to view serial sections of tissue simultaneously on a computer monitor. This enables the pathologist to evaluate the histology and expression of multiple markers for a patient in a single review. However, the rate limiting step in this process is the time taken for the pathologist to open each individual image, align the sections within the viewer, with a maximum of four slides at a time, and then manually move around the section. In addition, due to tissue processing and pre-analytical steps, sections with different stains have non-linear variations between the two acquisitions, that is, they will stretch and change shape from section to section. To date, no solution has come close to a workable solution to automatically align the serial sections into one composite image. This research work address this problem to obtain an automated serial section alignment tool enabling the pathologists to simply scroll through the various sections in a single viewer. To this aim a multi-resolution intensity-based registration method using mutual information as a similarity metric, an optimizer based on an evolutionary process and a bilinear transformation has been used. To characterize the performance of the algorithm 40 cases x 5 different serial sections stained with hematoxiline-eosine (HE), estrogen receptor (ER), progesterone receptor (PR), Ki67 and human epidermal growth factor receptor 2 (Her2), have been considered. The qualitative results obtained are promising, with average computation time of 26.4s for up to 14660x5799 images running interpreted code.

MRI Atlas-Based Measurement of Spinal Cord Injury Predicts Outcome in Acute Flaccid Myelitis.

PubMed

McCoy, D B; Talbott, J F; Wilson, Michael; Mamlouk, M D; Cohen-Adad, J; Wilson, Mark; Narvid, J

2017-02-01

Recent advances in spinal cord imaging analysis have led to the development of a robust anatomic template and atlas incorporated into an open-source platform referred to as the Spinal Cord Toolbox. Using the Spinal Cord Toolbox, we sought to correlate measures of GM, WM, and cross-sectional area pathology on T2 MR imaging with motor disability in patients with acute flaccid myelitis. Spinal cord imaging for 9 patients with acute flaccid myelitis was analyzed by using the Spinal Cord Toolbox. A semiautomated pipeline using the Spinal Cord Toolbox measured lesion involvement in GM, WM, and total spinal cord cross-sectional area. Proportions of GM, WM, and cross-sectional area affected by T2 hyperintensity were calculated across 3 ROIs: 1) center axial section of lesion; 2) full lesion segment; and 3) full cord atlas volume. Spearman rank order correlation was calculated to compare MR metrics with clinical measures of disability. Proportion of GM metrics at the center axial section significantly correlated with measures of motor impairment upon admission ( r [9] = -0.78; P = .014) and at 3-month follow-up ( r [9] = -0.66; P = .05). Further, proportion of GM extracted across the full lesion segment significantly correlated with initial motor impairment ( r [9] = -0.74, P = .024). No significant correlation was found for proportion of WM or proportion of cross-sectional area with clinical disability. Atlas-based measures of proportion of GM T2 signal abnormality measured on a single axial MR imaging section and across the full lesion segment correlate with motor impairment and outcome in patients with acute flaccid myelitis. This is the first atlas-based study to correlate clinical outcomes with segmented measures of T2 signal abnormality in the spinal cord. © 2017 by American Journal of Neuroradiology.

Paleomagnetic data from the Pignola 2 section (Southern Apennines, Italy) and the Dibona section (Dolomites, Italy): a contribution to the Carnian magnetostratigraphy

NASA Astrophysics Data System (ADS)

Maron, Matteo; Muttoni, Giovanni; Guido, Roghi; Mazza, Michele; Manuel, Rigo

2015-04-01

New magnetostratigraphic data for the Carnian have been obtained from the Pignola 2 section (Southern Apennines, Italy) and the Dibona section (Dolomites, Italy), obtaining 6 and 9 magnetozones respectively, both calibrated with conodonts and pollens. These new data cover the Julian/Tuvalian interval (Carnian) that is currently lacking of a clear magnetostratigraphic record. The Pignola 2 and Dibona sections have been compared with the magnetostratigraphy of other Tethyan sections from literature (e.g. Pizzo Mondello, Silická Brezová, Bolücektasi Tepe), integrating the magnetostratigraphy of the Carnian around the Julian/Tuvalian boundary. Considering also the sections of Mayerling and Prati di Stuores, containing the Ladinian/Carnian boundary, we obtained a continuous magnetostratigraphy for the Carnian Stage. Sections like Pizzo Mondello and Silická Brezová span from the late Carnian to the late Norian and have been correlated with Norian/Rhaetian sections up to the Hettangian base, like Pignola-Abriola, Steinbergkogel, Brumano-Italcementi Quarry. This sequence of correlations reveals a continuous magnetostratigraphic record along the whole Late Triassic valid for the Tethyan realm. The radiometric age from the Pignola 2 section (230.91±0.33 Ma from the "green clay-radiolaritic horizon") and the recent proposal for the age of the Rhaetian base (205.7 Ma from the Pignola-Abriola section, obtained by means of correlation with the Newark Astrochronological Polarity Time Scale and coherent with recent radiometric ages around the Norian/Rhaetian boundary), constrain our Late Triassic Tethyan composite magnetostratigraphy to a well-defined time interval, therefore improving current versions of the Triassic time scale.

Improving Evidence Dissemination and Accessibility through a Mobile-based Resource Platform.

PubMed

Zhu, Zheng; Xing, Weijie; Hu, Yan; Zhou, Yingfeng; Gu, Ying

2018-05-28

Current mobile information technologies fundamentally influence evidence dissemination from the perspective of both evidence seekers and evidence providers. However, there is no related study which tried using a mobile-based platform to disseminate evidence in China. The main object of this study is to develop a mobile-based evidence resource platform and to evaluate its effects of improving nurses' access to evidence-based practice resources and meeting users' demands. The mobile-based evidence resource platform was developed in 2014. A cross-sectional study was conducted over a period of 2 months between December 2015 and January 2016 to evaluate user experiences of and preferences regarding the platform. Descriptive analysis was adopted to analyze information and its communication effects from December 2014 to March 2017. A total of 472 participants met the inclusion criteria and responded to the survey. High scores were received for the overall rating (4.34 ± 0.67), evidence section (4.30 ± 0.63), learning materials section (4.26 ± 0.65), news section (4.27 ± 0.66), readability (4.38 ± 0.63), design and structure (4.38 ± 0.63), and interactivity (3.58 ± 0.84). As of March 31, 2017, the total number of followers was 28,954. The total number of readings was 584,834. The most current WCI value was 388.72. Our study demonstrated that the mobile-based platform for evidence transfer can promote the accessibility of evidence and meet users' demands. This mobile-based platform is currently available in the WeChat application environment. It will be a wise option for healthcare professionals for the purposes of learning about EBP and disseminating evidence in China.

24 CFR 103.204 - HUD complaints and compliance reviews.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., section 109 of the Housing and Community Development Act of 1974, section 504 of the Rehabilitation Act of... subpart based on information that one or more discriminatory housing practices has occurred, or is about...

24 CFR 103.204 - HUD complaints and compliance reviews.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., section 109 of the Housing and Community Development Act of 1974, section 504 of the Rehabilitation Act of... subpart based on information that one or more discriminatory housing practices has occurred, or is about...

Development of Comprehensive Low-Volume Pavement Design

DOT National Transportation Integrated Search

2000-07-01

Historically, "low-volume" pavements (less than 500 ADT) in Arkansas were typically constructed using a "standard" section, i.e. a double surface treatment over a specified thickness of granular base. Subsequent analysis indicated these sections were...

View of west elevation of building 18 section of machine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of west elevation of building 18 section of machine shops. Jet Lowe, Haer staff photographer, summer 1995. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

Social Media and Evidence-Based Maternity Care: A Cross-Sectional Survey Study.

PubMed

Dekker, Rebecca L; King, Sarah; Lester, Kara

2016-01-01

The purpose of this study was to describe how people use social media to find and disseminate information about evidence-based maternity care. We used a cross-sectional Internet-based survey design in which 1,661 participants were recruited from childbirth-related blogs. Participants answered questions about how they find, use, and share evidence-based maternity information using social media. Overall, women in this study were highly engaged in using social media to find and share maternity information. Most respondents were very interested in reading evidence-based maternity care articles online. Most intend to use this information that they found, despite the fact that a substantial percentage had no intentions of discussing this information with their childbirth educators or physician.

The Freight Analysis Framework Verson 4 (FAF4) - Building the FAF4 Regional Database: Data Sources and Estimation Methodologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hwang, Ho-Ling; Hargrove, Stephanie; Chin, Shih-Miao

The Freight Analysis Framework (FAF) integrates data from a variety of sources to create a comprehensive national picture of freight movements among states and major metropolitan areas by all modes of transportation. It provides a national picture of current freight flows to, from, and within the United States, assigns the flows to the transportation network, and projects freight flow patterns into the future. The FAF4 is the fourth database of its kind, FAF1 provided estimates for truck, rail, and water tonnage for calendar year 1998, FAF2 provided a more complete picture based on the 2002 Commodity Flow Survey (CFS) andmore » FAF3 made further improvements building on the 2007 CFS. Since the first FAF effort, a number of changes in both data sources and products have taken place. The FAF4 flow matrix described in this report is used as the base-year data to forecast future freight activities, projecting shipment weights and values from year 2020 to 2045 in five-year intervals. It also provides the basis for annual estimates to the FAF4 flow matrix, aiming to provide users with the timeliest data. Furthermore, FAF4 truck freight is routed on the national highway network to produce the FAF4 network database and flow assignments for truck. This report details the data sources and methodologies applied to develop the base year 2012 FAF4 database. An overview of the FAF4 components is briefly discussed in Section 2. Effects on FAF4 from the changes in the 2012 CFS are highlighted in Section 3. Section 4 provides a general discussion on the process used in filling data gaps within the domestic CFS matrix, specifically on the estimation of CFS suppressed/unpublished cells. Over a dozen CFS OOS components of FAF4 are then addressed in Section 5 through Section 11 of this report. This includes discussions of farm-based agricultural shipments in Section 5, shipments from fishery and logging sectors in Section 6. Shipments of municipal solid wastes and debris from construction and demolition activities are covered in Section 7. Movements involving OOS industry sectors on Retail, Services, and Household/Business Moves are addressed in Section 8. Flows of OOS commodity on crude petroleum and natural gas are presented in Sections 9 and 10, respectively. Discussions regarding shipments of foreign trade, including trade with Canada/Mexico, international airfreight, and waterborne foreign trade, are then discussed in Section 11. Several appendices are also provided at the end of this report to offer additional information.« less

76 FR 2453 - Medicare Program; Hospital Inpatient Value-Based Purchasing Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-13

... requirements under the Hospital IQR program in the FY 2006 IPPS final rule (70 FR 47420). C. Hospital Inpatient... it was amended by section 3001(a)(2)(C) of the Affordable Care Act, required that the Secretary... discharge of 1%, as required by section 1886(o)(7). Section 1886(o)(1)(C) provides that the Hospital VBP...

The Importance of a Laboratory Section on Student Learning Outcomes in a University Introductory Earth Science Course

ERIC Educational Resources Information Center

Forcino, Frank L.

2013-01-01

Laboratory sections of university Earth science courses provide hands-on, inquiry-based activities for students in support of lecture and discussion. Here, I compare student conceptual knowledge outcomes of laboratory sections by administering an independent concept inventory at the beginning and end of two courses: one that had a lecture and a…

Comparing Outcomes between a Traditional F2F Course and a Blended ITV Course

ERIC Educational Resources Information Center

Gerlich, R. Nicholas; Sollosy, Marc

2011-01-01

Two sections of the Principles of Management course were examined to compare student outcomes based on course delivery method. The first section was a traditional F2F class, while the second section was parallel cohorts of students meeting in two separate locations, but linked by ITV (Interactive Television). The professor appeared once per week…

32 CFR 174.15 - Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993. 174.15 Section 174.15 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE CLOSURES AND REALIGNMENT REVITALIZING BASE CLOSURE COMMUNITIES AND ADDRESSING IMPACTS OF REALIGNMENT...

32 CFR 174.15 - Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993. 174.15 Section 174.15 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE CLOSURES AND REALIGNMENT REVITALIZING BASE CLOSURE COMMUNITIES AND ADDRESSING IMPACTS OF REALIGNMENT...

32 CFR 174.15 - Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993. 174.15 Section 174.15 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE CLOSURES AND REALIGNMENT REVITALIZING BASE CLOSURE COMMUNITIES AND ADDRESSING IMPACTS OF REALIGNMENT...

32 CFR 174.15 - Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993. 174.15 Section 174.15 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE CLOSURES AND REALIGNMENT REVITALIZING BASE CLOSURE COMMUNITIES AND ADDRESSING IMPACTS OF REALIGNMENT...

32 CFR 174.15 - Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false Indemnification under Section 330 of the National Defense Authorization Act for Fiscal Year 1993. 174.15 Section 174.15 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE CLOSURES AND REALIGNMENT REVITALIZING BASE CLOSURE COMMUNITIES AND ADDRESSING IMPACTS OF REALIGNMENT...

37 CFR 385.13 - Minimum royalty rates and subscriber-based royalty floors for specific types of services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... subminimum II as described in paragraph (c) of this section for the accounting period and the aggregate... described in paragraph (b) of this section for the accounting period and the aggregate amount of 50 cents... subminimum I as described in paragraph (b) of this section for the accounting period and the aggregate amount...

Cross Sections and Transport Properties of BR- Ions in AR

NASA Astrophysics Data System (ADS)

Jovanovic, Jasmina; Stojanovic, Vladimir; Raspopovic, Zoran; Petrovic, Zoran

2014-10-01

We have used a combination of a simple semi-analytic theory - Momentum Transfer Theory (MTT) and exact Monte Carlo (MC) simulations to develop Br- in Ar momentum transfer cross section based on the available data for reduced mobility at the temperature T = 300 K over the range 10 Td <= E / N <= 300 Td. At very low energies, we have extrapolated obtained cross sections towards Langevin's cross section. Also, we have extrapolated data to somewhat higher energies based on behavior of similar ions in similar gases and by the addition of the total detachment cross section that was used from the threshold around 7.7 eV. Relatively complete set was derived which can be used in modeling of plasmas by both hybrid, particle in cell (PIC) and fluid codes. A good agreement between calculated and measured ion mobilities and longitudinal diffusion coefficients is an independent proof of the validity of the cross sections that were derived for the negative ion mobility data. In addition to transport coefficients we have also calculated the net rate coefficients of elastic scattering and detachment. Author acknowledge Ministry of Education, Science and Technology, Proj. Nos. 171037 and 410011.

Cross-shaped torsional spring

DOEpatents

Williamson, Matthew M.; Pratt, Gill A.

1999-06-08

The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section.

Retrotransposon-Based Molecular Markers for Analysis of Genetic Diversity within the Genus Linum

PubMed Central

Melnikova, Nataliya V.; Kudryavtseva, Anna V.; Zelenin, Alexander V.; Lakunina, Valentina A.; Yurkevich, Olga Yu.; Speranskaya, Anna S.; Dmitriev, Alexey A.; Krinitsina, Anastasia A.; Belenikin, Maxim S.; Uroshlev, Leonid A.; Snezhkina, Anastasiya V.; Sadritdinova, Asiya F.; Koroban, Nadezda V.; Amosova, Alexandra V.; Samatadze, Tatiana E.; Guzenko, Elena V.; Lemesh, Valentina A.; Savilova, Anastasya M.; Rachinskaia, Olga A.; Kishlyan, Natalya V.; Rozhmina, Tatiana A.; Bolsheva, Nadezhda L.; Muravenko, Olga V.

2014-01-01

SSAP method was used to study the genetic diversity of 22 Linum species from sections Linum, Adenolinum, Dasylinum, Stellerolinum, and 46 flax cultivars. All the studied flax varieties were distinguished using SSAP for retrotransposons FL9 and FL11. Thus, the validity of SSAP method was demonstrated for flax marking, identification of accessions in genebank collections, and control during propagation of flax varieties. Polymorphism of Fl1a, Fl1b, and Cassandra insertions were very low in flax varieties, but these retrotransposons were successfully used for the investigation of Linum species. Species clusterization based on SSAP markers was in concordance with their taxonomic division into sections Dasylinum, Stellerolinum, Adenolinum, and Linum. All species of sect. Adenolinum clustered apart from species of sect. Linum. The data confirmed the accuracy of the separation in these sections. Members of section Linum are not as closely related as members of other sections, so taxonomic revision of this section is desirable. L. usitatissimum accessions genetically distant from modern flax cultivars were revealed in our work. These accessions are of utmost interest for flax breeding and introduction of new useful traits into flax cultivars. The chromosome localization of Cassandra retrotransposon in Linum species was determined. PMID:25243121

Translators between CADD and section 5 of the ANSI Y14.26M standard

NASA Technical Reports Server (NTRS)

Emnett, R. F.; Gruttke, W. B.; Houghton, E. G.; Oakes, J. E.

1984-01-01

The American National Standard, Engineering Drawing and Related Documentation Practices, Digital Representation for Communication of Product Definition Data (ANSI Y14.26M-1981) comprises an introduction, three sections corresponding to IGES (Initial Graphics Exchange Specification) Version 1.0, and Section 5, a constructive, relational, language-based representation for geometric and topological entities. This presentation discusses the design and development of two-way translators between Section 5 (herein, ANSI5) and CADD (Computer-Aided Design Drafting).

Association between rates of caesarean section and maternal and neonatal mortality in the 21st century: a worldwide population-based ecological study with longitudinal data.

PubMed

Ye, J; Zhang, J; Mikolajczyk, R; Torloni, M R; Gülmezoglu, A M; Betran, A P

2016-04-01

Caesarean section was initially performed to save the lives of the mother and/or her baby. Caesarean section rates have risen substantially worldwide over the past decades. In this study, we set out to compile all available caesarean section rates worldwide at the country level, and to identify the appropriate caesarean section rate at the population level associated with the minimal maternal and neonatal mortality. Ecological study using longitudinal data. Worldwide country-level data. A total of 159 countries were included in the analyses, representing 98.0% of global live births (2005). Nationally representative caesarean section rates from 2000 to 2012 were compiled. We assessed the relationship between caesarean section rates and mortality outcomes, adjusting for socio-economic development by means of human development index (HDI) using fractional polynomial regression models. Maternal mortality ratio and neonatal mortality rate. Most countries have experienced increases in caesarean section rate during the study period. In the unadjusted analysis, there was a negative association between caesarean section rates and mortality outcomes for low caesarean section rates, especially among the least developed countries. After adjusting for HDI, this effect was much smaller and was only observed below a caesarean section rate of 5-10%. No important association between the caesarean section rate and maternal and neonatal mortality was observed when the caesarean section rate exceeded 10%. Although caesarean section is an effective intervention to save maternal and infant lives, based on the available ecological evidence, caesarean section rates higher than around 10% at the population level are not associated with decreases in maternal and neonatal mortality rates, and thus may not be necessary to achieve the lowest maternal and neonatal mortality. The caesarean section rate of around 10% may be the optimal rate to achieve the lowest mortality. © 2015 The Authors BJOG An International Journal of Obstetrics and Gynaecology published by John Wiley & Sons Ltd on behalf of Royal College of Obstetricians and Gynaecologists.

Geologic Cross Section D-D' Through the Appalachian Basin from the Findlay Arch, Sandusky County, Ohio, to the Valley and Ridge Province, Hardy County, West Virginia

USGS Publications Warehouse

Ryder, Robert T.; Crangle, Robert D.; Trippi, Michael H.; Swezey, Christopher S.; Lentz, Erika E.; Rowan, Elisabeth L.; Hope, Rebecca S.

2009-01-01

Geologic cross section D-D' is the second in a series of cross sections constructed by the U.S. Geological Survey to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section D-D' provides a regional view of the structural and stratigraphic framework of the Appalachian basin from the Findlay arch in northwestern Ohio to the Valley and Ridge province in eastern West Virginia, a distance of approximately 290 miles. The information shown on the cross section is based on geological and geophysical data from 13 deep drill holes, several of which penetrate the Paleozoic sedimentary rocks of the basin and bottom in Mesoproterozoic (Grenville-age) crystalline basement rocks. This cross section is a companion to cross section E-E' (Ryder and others, 2008) that is located about 25 to 50 mi to the southwest. Although specific petroleum systems in the Appalachian basin are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on information shown on the cross section. Cross section D-D' lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank), but it does provide a general geologic framework (stratigraphic units and general rock types) for the coal-bearing section. Also, cross section D-D' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Condition Survey and Paver Implementation Davis-Monthan Air Force Base, Arizona

DTIC Science & Technology

1991-02-01

questiotns that the program asks, and then analysis results are produced based on those responses. The analysis reports can only be generated using the...09/01/89 PCI- 36 RATING- POOR CONDITION- RIDING- SAFETY - DRAINAGE- SHOULDERS- OVERALL- TOTAL NUMBER OF SAMPLES IN SECTION- 4 NUMBER OF SAMPLES...CONDITION- RIDING- SAFETY - DRAINAGE- SHOULDERS- OVERALL- TOTAL NUMBER OF SAMPLES IN SECTION- 17 NUMBER OF SAMPLES SURVEYED- 5 RECOMMENDED SAMPLES TO BE

47 CFR 65.800 - Rate base.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Rate base. 65.800 Section 65.800 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERSTATE RATE OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.800 Rate base. The rate base shall...

47 CFR 65.800 - Rate base.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Rate base. 65.800 Section 65.800 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERSTATE RATE OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.800 Rate base. The rate base shall...

47 CFR 65.800 - Rate base.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Rate base. 65.800 Section 65.800 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERSTATE RATE OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.800 Rate base. The rate base shall...

47 CFR 65.800 - Rate base.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Rate base. 65.800 Section 65.800 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERSTATE RATE OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.800 Rate base. The rate base shall...

A microcontroller-based microwave free-space measurement system for permittivity determination of lossy liquid materials.

PubMed

Hasar, U C

2009-05-01

A microcontroller-based noncontact and nondestructive microwave free-space measurement system for real-time and dynamic determination of complex permittivity of lossy liquid materials has been proposed. The system is comprised of two main sections--microwave and electronic. While the microwave section provides for measuring only the amplitudes of reflection coefficients, the electronic section processes these data and determines the complex permittivity using a general purpose microcontroller. The proposed method eliminates elaborate liquid sample holder preparation and only requires microwave components to perform reflection measurements from one side of the holder. In addition, it explicitly determines the permittivity of lossy liquid samples from reflection measurements at different frequencies without any knowledge on sample thickness. In order to reduce systematic errors in the system, we propose a simple calibration technique, which employs simple and readily available standards. The measurement system can be a good candidate for industrial-based applications.

Theoretical X-ray production cross sections at incident photon energies across Li (i=1-3) absorption edges of Br

NASA Astrophysics Data System (ADS)

Puri, Sanjiv

2015-08-01

The X-ray production (XRP) cross sections, σLk (k = l, η, α, β6, β1, β3, β4, β9,10, γ1,5, γ2,3) have been evaluated at incident photon energies across the Li(i=1-3) absorption edge energies of 35Br using theoretical data sets of different physical parameters, namely, the Li(i=1-3) sub-shell the X-ray emission rates based on the Dirac-Fock (DF) model, the fluorescence and Coster Kronig yields based on the Dirac-Hartree-Slater (DHS) model, and two sets of the photoionisation cross sections based on the relativistic Hartree-Fock-Slater (RHFS) model and the Dirac-Fock (DF) model, in order to highlight the importance of electron exchange effects at photon energies in vicinity of absorption edge energies.

Proposed Auxiliary Boundary Stratigraphic Section and Point (ASSP) for the base of the Ordovician System at Lawson Cove, Utah, USA

USGS Publications Warehouse

Miller, James F.; Evans, Kevin R.; Ethington, Raymond L.; Freeman, Rebecca; Loch, James D.; Repetski, John E.; Ripperdan, Robert; Taylor, John F.

2016-01-01

The Global boundary Stratotype Section and Point (GSSP) for the base of the Ordovician System is at the First Appearance Datum (FAD) of the conodont Iapetognathus fluctivagus at Green Point in Newfoundland, Canada. Strata there are typical graptolitic facies that were deposited near the base of the continental slope.We propose establishing an Auxiliary boundary Stratotype Section and Point (ASSP) at the FAD of I. fluctivagus at the Lawson Cove section in the Ibex area of Millard County, Utah, USA. There, strata consist of typical shelly facies limestones that were deposited on a tropical carbonate platform and contain abundant conodonts, trilobites, brachiopods, and other fossil groups. Cambrian and Ordovician strata in this area are ~5300m thick, with the Lawson Cove section spanning 243m in three overlapping segments. Six other measured and studied sections in the area show stratigraphic relationships similar to those at Lawson Cove. Faunas have been used to divide these strata into 14 conodont and 7 trilobite zonal units. The widespread olenid trilobite Jujuyaspis occurs ~90cm above the proposed boundary at Lawson Cove; this genus is generally regarded as earliest Ordovician. Rhynchonelliform and linguliform brachiopods are common to abundant and are useful for correlation. The FAD of Iapetognathus fluctivagus and occurrences of Jujuyaspis and the Lower Ordovician planktonic graptolite Anisograptus matanensis all occur within a 2.4m interval of strata at a nearby section. Non-biological correlation tools include a detailed sequence stratigraphic classification and a detailed carbon-isotope profile. Especially useful for correlation is a positive 13C excursion peak ~15cm below the proposed boundary horizon. All of these correlation tools form an integrated framework that makes the Lawson Cove section especially useful as an ASSP for global correlation of strata with faunas typical of shallow, warm-water, shelly facies.

Characterization and Modeling of Recycled Pavement Sections

DOT National Transportation Integrated Search

2017-12-01

Because of its documented cost and environmental benefits, cold central plant recycling (CCPR) has attracted the interest of local and state departments of transportation. In 2015 two test pavement sections with CCPR as base layers were constructed a...

9. PHOTOCOPY, ARCHITECTURAL SECTIONS AND DETAIL DRAWING OF UNDERGROUND STORAGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. PHOTOCOPY, ARCHITECTURAL SECTIONS AND DETAIL DRAWING OF UNDERGROUND STORAGE MAGAZINES AND LAUNCHER-LOADER ASSEMBLIES. - NIKE Missile Base SL-40, Underground Storage Magazines & Launcher-Loader Assemblies, Southwesternmost end of launch area, Hecker, Monroe County, IL

Effects of convection patterns on freckle formation of directionally solidified Nickel-based superalloy casting with abruptly varying cross-sections

NASA Astrophysics Data System (ADS)

Qin, Ling; Shen, Jun; Li, Qiudong; Shang, Zhao

2017-05-01

The effects of convection patterns on freckle formation of directionally solidified Nickel-based superalloy sample with abruptly varying cross-sections were investigated experimentally and numerically. The experimental results demonstrate that freckles were only observed at the bottom of larger cross-section. Numerical results indicate that this phenomenon should be attributed to the different convection patterns at front of solidification interface. As the withdrawal rate increased, the primary dendrites spacing has an obvious influence on freckle formation. A more in-depth investigation of the convection patterns can provide a better understanding of freckle formation and perhaps offer methods to minimize freckles in turbine blades.

Tests of three tapered airfoils based on the N.A.C.A. 2200, the N.A.C.A.-M6, and the Clark Y sections

NASA Technical Reports Server (NTRS)

Anderson, Raymond F

1934-01-01

Three tapered airfoils based on the N.A.C.A. 2200, the N.A.C.A.-M6, and the Clark Y sections were tested in the variable-density wind tunnel at a Reynolds Number of approximately 3,100,000. The models, which were of aspect ratio 6, had constant core center sections and rounded tips, and tapered in thickness from 18 percent at the roots to 9 percent at the tips. The aerodynamic characteristics are given by the usual dimensionless coefficients plotted for both positive and negative angles of attack and by effective profile-drag coefficients plotted against lift coefficients.

Droplet microfluidics for single-cell analysis.

PubMed

Brouzes, Eric

2012-01-01

This book chapter aims at providing an overview of all the aspects and procedures needed to develop a droplet-based workflow for single-cell analysis (see Fig. 10.1). The surfactant system used to stabilize droplets is a critical component of droplet microfluidics; its properties define the type of droplet-based assays and workflows that can be developed. The scope of this book chapter is limited to fluorinated surfactant systems that have proved to generate extremely stable droplets and allow to easily retrieve the encapsulated material. The formulation section discusses how the experimental parameters influence the choice of the surfactant system to use. The circuit design section presents recipes to design and integrate different droplet modules into a whole assay. The fabrication section describes the manufacturing of microfluidic chip including the surface treatment which is pivotal in droplet microfluidics. Finally, the last section reviews the experimental setup for fluorescence detection with an emphasis on cell injection and incubation.

Introduction to the special section on developing guidelines for the evidence-based assessment (EBA) of adult disorders.

PubMed

Hunsley, John; Mash, Eric J

2005-09-01

The goal of this special section is to encourage greater awareness of evidence-based assessment (EBA) in the development of a scientifically supported clinical psychology. In this introductory article, the authors describe the elements that authors in this special section were asked to consider in their focused reviews (including the scope of available psychometric evidence, advancements in psychopathology research, and evidence of attention to factors such as gender, age, and ethnicity in measure validation). The authors then present central issues evident in the articles that deal with anxiety, depression, personality disorders, and couple distress and in the accompanying commentaries. The authors conclude by presenting key themes emerging from the articles in this special section, including gaps in psychometric information, limited information about the utility of assessment, the discrepancy between recommended EBAs and current training and practice, and the need for further data on the process of clinical assessment.

Electrodes for solid state gas sensor

DOEpatents

Mukundan, Rangachary [Santa Fe, NM; Brosha, Eric L [Los Alamos, NM; Garzon, Fernando [Santa Fe, NM

2007-05-08

A mixed potential electrochemical sensor for the detection of gases has a ceria-based electrolyte with a surface for exposing to the gases to be detected, and with a reference wire electrode and a sensing wire electrode extending through the surface and fixed within the electrolyte as the electrolyte is compressed and sintered. The electrochemical sensor is formed by placing a wire reference electrode and a wire sensing electrode in a die, where each electrode has a first compressed planar section and a second section depending from the first section with the second section of each electrode extending axially within the die. The die is filled with an oxide-electrolyte powder and the powder is pressed within the die with the wire electrodes. The wire-electrodes and the pressed oxide-electrolyte powder are sintered to form a ceramic electrolyte base with a reference wire electrode and a sensing wire electrode depending therefrom.

Electrodes for solid state gas sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mukundan, Rangachary; Brosha, Eric L; Garzon, Fernando

2007-05-08

A mixed potential electrochemical sensor for the detection of gases has a ceria-based electrolyte with a surface for exposing to the gases to be detected, and with a reference wire electrode and a sensing wire electrode extending through the surface and fixed within the electrolyte as the electrolyte is compressed and sintered. The electrochemical sensor is formed by placing a wire reference electrode and a wire sensing electrode in a die, where each electrode has a first compressed planar section and a second section depending from the first section with the second section of each electrode extending axially within themore » die. The die is filled with an oxide-electrolyte powder and the powder is pressed within the die with the wire electrodes. The wire-electrodes and the pressed oxide-electrolyte powder are sintered to form a ceramic electrolyte base with a reference wire electrode and a sensing wire electrode depending therefrom.« less

Electrodes for solid state gas sensor

DOEpatents

Mukundan, Rangachary; Brosha, Eric L.; Garzon, Fernando

2003-08-12

A mixed potential electrochemical sensor for the detection of gases has a ceria-based electrolyte with a surface for exposing to the gases to be detected, and with a reference wire electrode and a sensing wire electrode extending through the surface and fixed within the electrolyte as the electrolyte is compressed and sintered. The electrochemical sensor is formed by placing a wire reference electrode and a wire sensing electrode in a die, where each electrode has a first compressed planar section and a second section depending from the first section with the second section of each electrode extending axially within the die. The die is filled with an oxide-electrolyte powder and the powder is pressed within the die with the wire electrodes. The wire-electrodes and the pressed oxide-electrolyte powder are sintered to form a ceramic electrolyte base with a reference wire electrode and a sensing wire electrode depending therefrom.

High-average-power 2-kHz laser for generation of ultrashort x-ray pulses.

PubMed

Jiang, Yan; Lee, Taewoo; Li, Wei; Ketwaroo, Gyanprakash; Rose-Petruck, Christoph G

2002-06-01

We describe a Ti:sapphire-based laser-x-ray system specifically designed for generation of ultrafast x-ray pulses in the tenths-of-nanometers spectral range at a 2-kHz repetition rate. To obtain high-contrast laser pulses we divide the laser system into a section for generation of microjoule, high-contrast pulses with pulse cleaning and a subsequent section for chirped-pulse amplification and pulse compression. This laser section operates in conjunction with an x-ray-generation section based on a moving copper wire in a He atmosphere. The high reliability of the entire system permits maintenance-free production of x-ray pulses over tens of hours. Average x-ray fluxes of 10(13) photons/(s 4pi sr 1 keV) at 3 keV and 10(9) photons/(s 4pi sr) above 5 keV of photon energy are produced.

Comparison of the Z$$/\\gamma^{*}$$ + jets to $$\\gamma$$ + jets cross sections in pp collisions at $$\\sqrt{s}$$ = 8 TeV

DOE PAGES

Khachatryan, Vardan

2015-10-20

In this study, a comparison of the differential cross sections for the processes Z/γ * + jets and photon (γ)+jets is presented. The measurements are based on data collected with the CMS detector at √s = 8 TeV corresponding to an integrated luminosity of 19.7 fb –1. The differential cross sections and their ratios are presented as functions of p T. The measurements are also shown as functions of the jet multiplicity. Differential cross sections are obtained as functions of the ratio of the Z/γ* p T to the sum of all jet transverse momenta and of the ratio ofmore » the Z/γ* p T to the leading jet transverse momentum. The data are corrected for detector effects and are compared to simulations based on several QCD calculations.« less

Subranging technique using superconducting technology

DOEpatents

Gupta, Deepnarayan

2003-01-01

Subranging techniques using "digital SQUIDs" are used to design systems with large dynamic range, high resolution and large bandwidth. Analog-to-digital converters (ADCs) embodying the invention include a first SQUID based "coarse" resolution circuit and a second SQUID based "fine" resolution circuit to convert an analog input signal into "coarse" and "fine" digital signals for subsequent processing. In one embodiment, an ADC includes circuitry for supplying an analog input signal to an input coil having at least a first inductive section and a second inductive section. A first superconducting quantum interference device (SQUID) is coupled to the first inductive section and a second SQUID is coupled to the second inductive section. The first SQUID is designed to produce "coarse" (large amplitude, low resolution) output signals and the second SQUID is designed to produce "fine" (low amplitude, high resolution) output signals in response to the analog input signals.

Extraction efficiency and implications for absolute quantitation of propranolol in mouse brain, liver and kidney thin tissue sections using droplet-based liquid microjunction surface sampling-HPLC ESI-MS/MS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kertesz, Vilmos; Weiskittel, Taylor M.; Vavek, Marissa

Currently, absolute quantitation aspects of droplet-based surface sampling for thin tissue analysis using a fully automated autosampler/HPLC-ESI-MS/MS system are not fully evaluated. Knowledge of extraction efficiency and its reproducibility is required to judge the potential of the method for absolute quantitation of analytes from thin tissue sections. Methods: Adjacent thin tissue sections of propranolol dosed mouse brain (10- μm-thick), kidney (10- μm-thick) and liver (8-, 10-, 16- and 24- μm-thick) were obtained. Absolute concentration of propranolol was determined in tissue punches from serial sections using standard bulk tissue extraction protocols and subsequent HPLC separations and tandem mass spectrometric analysis. Thesemore » values were used to determine propranolol extraction efficiency from the tissues with the droplet-based surface sampling approach. Results: Extraction efficiency of propranolol using 10- μm-thick brain, kidney and liver thin tissues using droplet-based surface sampling varied between ~45-63%. Extraction efficiency decreased from ~65% to ~36% with liver thickness increasing from 8 μm to 24 μm. Randomly selecting half of the samples as standards, precision and accuracy of propranolol concentrations obtained for the other half of samples as quality control metrics were determined. Resulting precision ( ±15%) and accuracy ( ±3%) values, respectively, were within acceptable limits. In conclusion, comparative quantitation of adjacent mouse thin tissue sections of different organs and of various thicknesses by droplet-based surface sampling and by bulk extraction of tissue punches showed that extraction efficiency was incomplete using the former method, and that it depended on the organ and tissue thickness. However, once extraction efficiency was determined and applied, the droplet-based approach provided the required quantitation accuracy and precision for assay validations. Furthermore, this means that once the extraction efficiency was calibrated for a given tissue type and drug, the droplet-based approach provides a non-labor intensive and high-throughput means to acquire spatially resolved quantitative analysis of multiple samples of the same type.« less

Extraction efficiency and implications for absolute quantitation of propranolol in mouse brain, liver and kidney thin tissue sections using droplet-based liquid microjunction surface sampling-HPLC ESI-MS/MS

DOE PAGES

Kertesz, Vilmos; Weiskittel, Taylor M.; Vavek, Marissa; ...

2016-06-22

Currently, absolute quantitation aspects of droplet-based surface sampling for thin tissue analysis using a fully automated autosampler/HPLC-ESI-MS/MS system are not fully evaluated. Knowledge of extraction efficiency and its reproducibility is required to judge the potential of the method for absolute quantitation of analytes from thin tissue sections. Methods: Adjacent thin tissue sections of propranolol dosed mouse brain (10- μm-thick), kidney (10- μm-thick) and liver (8-, 10-, 16- and 24- μm-thick) were obtained. Absolute concentration of propranolol was determined in tissue punches from serial sections using standard bulk tissue extraction protocols and subsequent HPLC separations and tandem mass spectrometric analysis. Thesemore » values were used to determine propranolol extraction efficiency from the tissues with the droplet-based surface sampling approach. Results: Extraction efficiency of propranolol using 10- μm-thick brain, kidney and liver thin tissues using droplet-based surface sampling varied between ~45-63%. Extraction efficiency decreased from ~65% to ~36% with liver thickness increasing from 8 μm to 24 μm. Randomly selecting half of the samples as standards, precision and accuracy of propranolol concentrations obtained for the other half of samples as quality control metrics were determined. Resulting precision ( ±15%) and accuracy ( ±3%) values, respectively, were within acceptable limits. In conclusion, comparative quantitation of adjacent mouse thin tissue sections of different organs and of various thicknesses by droplet-based surface sampling and by bulk extraction of tissue punches showed that extraction efficiency was incomplete using the former method, and that it depended on the organ and tissue thickness. However, once extraction efficiency was determined and applied, the droplet-based approach provided the required quantitation accuracy and precision for assay validations. Furthermore, this means that once the extraction efficiency was calibrated for a given tissue type and drug, the droplet-based approach provides a non-labor intensive and high-throughput means to acquire spatially resolved quantitative analysis of multiple samples of the same type.« less

Diagnostic and prognostic histopathology system using morphometric indices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parvin, Bahram; Chang, Hang; Han, Ju

Determining at least one of a prognosis or a therapy for a patient based on a stained tissue section of the patient. An image of a stained tissue section of a patient is processed by a processing device. A set of features values for a set of cell-based features is extracted from the processed image, and the processed image is associated with a particular cluster of a plurality of clusters based on the set of feature values, where the plurality of clusters is defined with respect to a feature space corresponding to the set of features.

[Attendance for Using Internet-Based Support After Inpatient Treatment - A Cross-Sectional Survey].

PubMed

Frank, Fabian; Gräder, Nicola; Dahlmann, Hannah; Berger, Mathias; Hölzel, Lars

2018-05-01

Examination of the attendance for using internet-based measures after inpatient treatment. Cross-sectional-survey in former inpatients (N = 247). 44.9 % are willing to use measures via videoconference, 34.7 % via Chat, 50.0 % via E-Mail and 38.0 % as onlinetherapy. Attendance is lower in older age groups. Benefits regarding the introduced measures are seen mainly in the flexibility and disadvantages in the impersonal character. A relevant share of especially younger patients is willing to use internet-based measures. © Georg Thieme Verlag KG Stuttgart · New York.

Lightweight design of automobile frame based on magnesium alloy

NASA Astrophysics Data System (ADS)

Lyu, R.; Jiang, X.; Minoru, O.; Ju, D. Y.

2018-06-01

The structural performance and lightweighting of car base frame design is a challenging task due to all the performance targets that must be satisfied. In this paper, three kinds of materials (iron, aluminum and magnesium alloy) replacement along with section design optimization strategy is proposed to develop a lightweight car frame structure to satisfy the tensile and safety while reducing weight. Two kinds of cross-sections are considered as the design variables. Using Ansys static structure, the design optimization problem is solved, comparing the results of each step, structure of the base flame is optimized for lightweight.

5. Photographic copy of engineering drawing showing plans, elevation and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Photographic copy of engineering drawing showing plans, elevation and section of Deluge Water System, including reservior (4316), Pump House (4317), and water tower. Job No. Muroc A(5-ll), Military Construction, San Bernardino-Mojave Area, San Bernardino, California: Muroc Bombing Range, Muroc Lake, California.; Additional Facilities for Materiel Center Flight Test Base, Water Supply System, Plans and Sections, Sheet 5 of 10, May 1943. Records on file at AFFTC/CE-CECC-B (Design/Construction Flight/RPMC), Edwards AFB, California. - Edwards Air Force Base, North Base, Deluge Water Pumping Station, Near Second & D Streets, Boron, Kern County, CA

Examining the DSM-5 Section III Criteria for Obsessive-Compulsive Personality Disorder in a Community Sample.

PubMed

Liggett, Jacqueline; Sellbom, Martin; Carmichael, Kieran L C

2017-12-01

The current study examined the extent to which the trait-based operationalization of obsessive-compulsive personality disorder (OCPD) in Section III of the DSM-5 describes the same construct as the one described in Section II. A community sample of 313 adults completed a series of personality inventories indexing the DSM-5 Sections II and III diagnostic criteria for OCPD, in addition to a measure of functional impairment modelled after the criteria in Section III. Results indicated that latent constructs representing Section II and Section III OCPD overlapped substantially (r = .75, p < .001). Hierarchical latent regression models revealed that at least three of the four DSM-5 Section III facets (Rigid Perfectionism, Perseveration, and Intimacy Avoidance) uniquely accounted for a large proportion of variance (53%) in a latent Section II OCPD variable. Further, Anxiousness and (low) Impulsivity, as well as self and interpersonal impairment, augmented the prediction of latent OCPD scores.

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chugunov, Nikita; Altundas, Bilgin

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity, bulk density, and fluid and time-lapse neutron capture cross section profiles of rock at times 0 day (baseline) through 14 days. First 9 sheets (each named after the corresponding CO2 push-pull simulation time) contains simulated pressure, saturation, temperature, salinity profiles and the corresponding effective elastic and neutron capture cross section profiles of rock matrix at the time of CO2 injection. Eachmore » sheet contains two sets of effective compressional velocity profiles of the rock, one based on Gassmann and the other based on Patchy saturation model. Effective neutron capture cross section calculations are done using a proprietary neutron cross-section simulator (SNUPAR) whereas for the thermodynamic properties of CO2 and bulk density of rock matrix filled with fluid, a standalone fluid substitution tool by Schlumberger is used. Last sheet in the file contains the bulk modulus of solid rock, which is inverted from the rock properties (porosity, sound speed etc) based on Gassmann model. Bulk modulus of solid rock in turn is used in the fluid substitution.« less

Feasibility study on AFR-100 fuel conversion from uranium-based fuel to thorium-based fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heidet, F.; Kim, T.; Grandy, C.

2012-07-30

Although thorium has long been considered as an alternative to uranium-based fuels, most of the reactors built to-date have been fueled with uranium-based fuel with the exception of a few reactors. The decision to use uranium-based fuels was initially made based on the technology maturity compared to thorium-based fuels. As a result of this experience, lot of knowledge and data have been accumulated for uranium-based fuels that made it the predominant nuclear fuel type for extant nuclear power. However, following the recent concerns about the extent and availability of uranium resources, thorium-based fuels have regained significant interest worldwide. Thorium ismore » more abundant than uranium and can be readily exploited in many countries and thus is now seen as a possible alternative. As thorium-based fuel technologies mature, fuel conversion from uranium to thorium is expected to become a major interest in both thermal and fast reactors. In this study the feasibility of fuel conversion in a fast reactor is assessed and several possible approaches are proposed. The analyses are performed using the Advanced Fast Reactor (AFR-100) design, a fast reactor core concept recently developed by ANL. The AFR-100 is a small 100 MW{sub e} reactor developed under the US-DOE program relying on innovative fast reactor technologies and advanced structural and cladding materials. It was designed to be inherently safe and offers sufficient margins with respect to the fuel melting temperature and the fuel-cladding eutectic temperature when using U-10Zr binary metal fuel. Thorium-based metal fuel was preferred to other thorium fuel forms because of its higher heavy metal density and it does not need to be alloyed with zirconium to reduce its radiation swelling. The various approaches explored cover the use of pure thorium fuel as well as the use of thorium mixed with transuranics (TRU). Sensitivity studies were performed for the different scenarios envisioned in order to determine the best core performance characteristics for each of them. With the exception of the fuel type and enrichment, the reference AFR-100 core design characteristics were kept unchanged, including the general core layout and dimensions, assembly dimensions, materials and power rating. In addition, the mass of {sup 235}U required was kept within a reasonable range from that of the reference AFR-100 design. The core performance characteristics, kinetics parameters and reactivity feedback coefficients were calculated using the ANL suite of fast reactor analysis code systems. Orifice design calculations and the steady-state thermal-hydraulic analyses were performed using the SE2-ANL code. The thermal margins were evaluated by comparing the peak temperatures to the design limits for parameters such as the fuel melting temperature and the fuel-cladding eutectic temperature. The inherent safety features of AFR-100 cores proposed were assessed using the integral reactivity parameters of the quasi-static reactivity balance analysis. The design objectives and requirements, the computation methods used as well as a description of the core concept are provided in Section 2. The three major approaches considered are introduced in Section 3 and the neutronics performances of those approaches are discussed in the same section. The orifice zoning strategies used and the steady-state thermal-hydraulic performance are provided in Section 4. The kinetics and reactivity coefficients, including the inherent safety characteristics, are provided in Section 5, and the Conclusions in Section 6. Other scenarios studied and sensitivity studies are provided in the Appendix section.« less

New fit of thermal neutron constants (TNC) for 233,235U, 239,241Pu and 252Cf(sf): Microscopic vs. maxwellian data

NASA Astrophysics Data System (ADS)

Pronyaev, Vladimir G.; Capote, Roberto; Trkov, Andrej; Noguere, Gilles; Wallner, Anton

2017-09-01

An IAEA project to update the Neutron Standards is near completion. Traditionally, the Thermal Neutron Constants (TNC) evaluated data by Axton for thermal-neutron scattering, capture and fission on four fissile nuclei and the total nu-bar of 252Cf(sf) are used as input in the combined least-square fit with neutron cross section standards. The evaluation by Axton (1986) was based on a least-square fit of both thermal-spectrum averaged cross sections (Maxwellian data) and microscopic cross sections at 2200 m/s. There is a second Axton evaluation based exclusively on measured microscopic cross sections at 2200 m/s (excluding Maxwellian data). Both evaluations disagree within quoted uncertainties for fission and capture cross sections and total multiplicities of uranium isotopes. There are two factors, which may lead to such difference: Westcott g-factors with estimated 0.2% uncertainties used in the Axton's fit, and deviation of the thermal spectra from Maxwellian shape. To exclude or mitigate the impact of these factors, a new combined GMA fit of standards was undertaken with Axton's TNC evaluation based on 2200 m/s data used as a prior. New microscopic data at the thermal point, available since 1986, were added to the combined fit. Additionally, an independent evaluation of TNC was undertaken using CONRAD code. Both GMA and CONRAD results are consistent within quoted uncertainties. New evaluation shows a small increase of fission and capture thermal cross sections, and a corresponding decrease in evaluated thermal nubar for uranium isotopes and 239Pu.

10 CFR 429.40 - Candelabra base incandescent lamps and intermediate base incandescent lamps.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Candelabra base incandescent lamps and intermediate base incandescent lamps. 429.40 Section 429.40 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION CERTIFICATION....40 Candelabra base incandescent lamps and intermediate base incandescent lamps. (a) Sampling plan for...

Comparing the utility of DSM-5 Section II and III antisocial personality disorder diagnostic approaches for capturing psychopathic traits.

PubMed

Few, Lauren R; Lynam, Donald R; Maples, Jessica L; MacKillop, James; Miller, Joshua D

2015-01-01

The current study compares the 2 diagnostic approaches (Section II vs. Section III) included in the Diagnostic and Statistical Manual for Mental Disorders-5 (DSM-5; American Psychiatric Association, 2013) for diagnosis of antisocial personality disorder (ASPD) in terms of their relations with psychopathic traits and externalizing behaviors (EBs). The Section III approach to ASPD, which is more explicitly trait-based than the Section II approach, also includes a psychopathy specifier (PS) that was created with the goal of making the diagnosis of ASPD more congruent with psychopathy. In a community sample of individuals currently receiving mental health treatment (N = 106), ratings of the 2 DSM-5 diagnostic approaches were compared in relation to measures of psychopathy, as well as indices of EBs. Both DSM-5 ASPD approaches were significantly related to the psychopathy scores, although the Section III approach accounted for almost twice the amount of variance when compared with the Section II approach. Relatively little of this predictive advantage, however, was due to the PS, as these traits manifested little evidence of incremental validity in relation to existing psychopathy measures and EBs, with the exception of a measure of fearless dominance. Overall, the DSM-5 Section III diagnostic approach for ASPD is more convergent with the construct of psychopathy, from which ASPD was originally derived. These improvements, however, are due primarily to the new trait-based focus in the Section III ASPD diagnosis rather than the assessment of personality dysfunction or the inclusion of additional "psychopathy-specific" traits. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

7. PHOTOCOPY, PLANS, ELEVATIONS, AND SECTION DRAWING FOR MISSILE TEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. PHOTOCOPY, PLANS, ELEVATIONS, AND SECTION DRAWING FOR MISSILE TEST AND ASSEMBLY BUILDING. - NIKE Missile Base SL-40, Missile Test & Assembly Building, South end of launch area, northeast of Generator Building No. 3, Hecker, Monroe County, IL

DETAILS, ROOF VENTS AND WINDOWS, NORTHERN CORNER SECTION OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAILS, ROOF VENTS AND WINDOWS, NORTHERN CORNER SECTION OF THE EAST (REAR) FACADE, LOOKING NORTHWEST - Eglin Air Force Base, Storehouse & Company Administration, Southeast of Flager Road, Nassau Lane, & southern edge of Weekly Bayou, Valparaiso, Okaloosa County, FL

DETAILS, ENTRY AND ROOF VENT, SOUTHERN SECTION OF THE WEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAILS, ENTRY AND ROOF VENT, SOUTHERN SECTION OF THE WEST (FRONT) FACADE, LOOKING NORTHEAST - Eglin Air Force Base, Storehouse & Company Administration, Southeast of Flager Road, Nassau Lane, & southern edge of Weekly Bayou, Valparaiso, Okaloosa County, FL

50. PIPING FOR SUBMARINE SECTION, Y&D No. 107728 Scale 3/8' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

50. PIPING FOR SUBMARINE SECTION, Y&D No. 107728 Scale 3/8' = 1'; August 26, 1929 - U.S. Naval Submarine Base, New London Submarine Escape Training Tank, Albacore & Darter Roads, Groton, New London County, CT

Innovative Structural Materials and Sections with Strain Hardening Cementitious Composites

NASA Astrophysics Data System (ADS)

Dey, Vikram

The motivation of this work is based on development of new construction products with strain hardening cementitious composites (SHCC) geared towards sustainable residential applications. The proposed research has three main objectives: automation of existing manufacturing systems for SHCC laminates; multi-level characterization of mechanical properties of fiber, matrix, interface and composites phases using servo-hydraulic and digital image correlation techniques. Structural behavior of these systems were predicted using ductility based design procedures using classical laminate theory and structural mechanics. SHCC sections are made up of thin sections of matrix with Portland cement based binder and fine aggregates impregnating continuous one-dimensional fibers in individual or bundle form or two/three dimensional woven, bonded or knitted textiles. Traditional fiber reinforced concrete (FRC) use random dispersed chopped fibers in the matrix at a low volume fractions, typically 1-2% to avoid to avoid fiber agglomeration and balling. In conventional FRC, fracture localization occurs immediately after the first crack, resulting in only minor improvement in toughness and tensile strength. However in SHCC systems, distribution of cracking throughout the specimen is facilitated by the fiber bridging mechanism. Influence of material properties of yarn, composition, geometry and weave patterns of textile in the behavior of laminated SHCC skin composites were investigated. Contribution of the cementitious matrix in the early age and long-term performance of laminated composites was studied with supplementary cementitious materials such as fly ash, silica fume, and wollastonite. A closed form model with classical laminate theory and ply discount method, coupled with a damage evolution model was utilized to simulate the non-linear tensile response of these composite materials. A constitutive material model developed earlier in the group was utilized to characterize and correlate the behavior of these structural composites under uniaxial tension and flexural loading responses. Development and use of analytical models enables optimal design for application of these materials in structural applications. Another area of immediate focus is the development of new construction products from SHCC laminates such as angles, channels, hat sections, closed sections with optimized cross sections. Sandwich composites with stress skin-cellular core concept were also developed to utilize strength and ductility of fabric reinforced skin in addition to thickness, ductility, and thermal benefits of cellular core materials. The proposed structurally efficient and durable sections promise to compete with wood and light gage steel based sections for lightweight construction and panel application.

Calculation on spectrum of direct DNA damage induced by low-energy electrons including dissociative electron attachment.

PubMed

Liu, Wei; Tan, Zhenyu; Zhang, Liming; Champion, Christophe

2017-03-01

In this work, direct DNA damage induced by low-energy electrons (sub-keV) is simulated using a Monte Carlo method. The characteristics of the present simulation are to consider the new mechanism of DNA damage due to dissociative electron attachment (DEA) and to allow determining damage to specific bases (i.e., adenine, thymine, guanine, or cytosine). The electron track structure in liquid water is generated, based on the dielectric response model for describing electron inelastic scattering and on a free-parameter theoretical model and the NIST database for calculating electron elastic scattering. Ionization cross sections of DNA bases are used to generate base radicals, and available DEA cross sections of DNA components are applied for determining DNA-strand breaks and base damage induced by sub-ionization electrons. The electron elastic scattering from DNA components is simulated using cross sections from different theoretical calculations. The resulting yields of various strand breaks and base damage in cellular environment are given. Especially, the contributions of sub-ionization electrons to various strand breaks and base damage are quantitatively presented, and the correlation between complex clustered DNA damage and the corresponding damaged bases is explored. This work shows that the contribution of sub-ionization electrons to strand breaks is substantial, up to about 40-70%, and this contribution is mainly focused on single-strand break. In addition, the base damage induced by sub-ionization electrons contributes to about 20-40% of the total base damage, and there is an evident correlation between single-strand break and damaged base pair A-T.

Web-Based vs. Face-to-Face MBA Classes: A Comparative Assessment Study

ERIC Educational Resources Information Center

Brownstein, Barry; Brownstein, Deborah; Gerlowski, Daniel A.

2008-01-01

The challenges of online learning include ensuring that the learning outcomes are at least as robust as in the face-to-face sections of the same course. At the University of Baltimore, both online sections and face-to-face sections of core MBA courses are offered. Once admitted to the MBA, students are free to enroll in any combination of…

36 CFR 1237.30 - How do agencies manage records on nitrocellulose-base and cellulose-acetate base film?

Code of Federal Regulations, 2010 CFR

2010-07-01

... records on nitrocellulose-base and cellulose-acetate base film? 1237.30 Section 1237.30 Parks, Forests... and cellulose-acetate base film? (a) The nitrocellulose base, a substance akin to gun cotton, is chemically unstable and highly flammable. Agencies must handle nitrocellulose-base film (used in the...

A Modular Hierarchical Approach to 3D Electron Microscopy Image Segmentation

PubMed Central

Liu, Ting; Jones, Cory; Seyedhosseini, Mojtaba; Tasdizen, Tolga

2014-01-01

The study of neural circuit reconstruction, i.e., connectomics, is a challenging problem in neuroscience. Automated and semi-automated electron microscopy (EM) image analysis can be tremendously helpful for connectomics research. In this paper, we propose a fully automatic approach for intra-section segmentation and inter-section reconstruction of neurons using EM images. A hierarchical merge tree structure is built to represent multiple region hypotheses and supervised classification techniques are used to evaluate their potentials, based on which we resolve the merge tree with consistency constraints to acquire final intra-section segmentation. Then, we use a supervised learning based linking procedure for the inter-section neuron reconstruction. Also, we develop a semi-automatic method that utilizes the intermediate outputs of our automatic algorithm and achieves intra-segmentation with minimal user intervention. The experimental results show that our automatic method can achieve close-to-human intra-segmentation accuracy and state-of-the-art inter-section reconstruction accuracy. We also show that our semi-automatic method can further improve the intra-segmentation accuracy. PMID:24491638

Taxonomic comparison of three different groups of aflatoxin producers and a new efficient producer of aflatoxin B1, sterigmatocystin and 3-O-methylsterigmatocystin, Aspergillus rambellii sp. nov.

PubMed

Frisvad, Jens C; Skouboe, Pernille; Samson, Robert A

2005-07-01

Accumulation of the carcinogenic mycotoxin aflatoxin B, has been reported from members of three different groups of Aspergilli (4) Aspergillus flavus, A. flavus var. parvisclerotigenus, A. parasiticus, A. toxicarius, A. nomius, A. pseudotamarii, A. zhaoqingensis, A. bombycis and from the ascomycete genus Petromyces (Aspergillus section Flavi), (2) Emericella astellata and E. venezuelensis from the ascomycete genus Emericella (Aspergillus section Nidulantes) and (3) Aspergillus ochraceoroseus from a new section proposed here: Aspergillus section Ochraceorosei. We here describe a new species, A. rambellii referable to Ochraceorosei, that accumulates very large amounts of sterigmatocystin, 3-O-methylsterigmatocystin and aflatoxin B1, but not any of the other known extrolites produced by members of Aspergillus section Flavi or Nidulantes. G type aflatoxins were only found in some of the species in Aspergillus section Flavi, while the B type aflatoxins are common in all three groups. Based on the cladistic analysis of nucleotide sequences of ITS1 and 2 and 5.8S, it appears that type G aflatoxin producers are paraphyletic and that section Ochraceorosei is a sister group to the sections Flavi, Circumdati and Cervini, with Emericella species being an outgroup to these sister groups. All aflatoxin producing members of section Flavi produce kojic acid and most species, except A. bombycis and A. pseudotamarii, produce aspergillic acid. Species in Flavi, that produce B type aflatoxins, but not G type aflatoxins, often produced cyclopiazonic acid. No strain was found which produce both G type aflatoxins and cyclopiazonic acid. It was confirmed that some strains of A. flavus var. columnaris produce aflatoxin B2, but this extrolite was not detected in the ex type strain of that variety. A. flavus var. parvisclerotigenus is raised to species level based on the specific combination of small sclerotia, profile of extrolites and rDNA sequence differences. A. zhaoqingensis is regarded as a synonym of A. nomius, while A. toxicarius resembles A. parasiticus but differs with at least three base pair differences. At least 10 Aspergillus species can be recognized which are able to biosynthesize aflatoxins, and they are placed in three very different clades.

Advances in Enterprise Control. AEC Proceedings, November 15-16, 1999/San Diego, California

DTIC Science & Technology

1999-11-16

structure of tropical termite mounds. 2.3. Mechanisms that each agent deposits one unit of pheromone per unit time and that a proportion 0 < E < 1 of the...Stubberud 137 Section 4: Distributed and Agent-Based Strategies 149 Synthetic Pheromones for Distributed Motion Control by H. Van Dyke Parunak and...Computer Engineering, June, 1994. 147 148 Section 4 Distributed and Agent-Based Strategies 149 150 Synthetic Pheromones for Distributed Motion

15. "FIRING CONTROL BLOCKHOUSE; STATION '0' AREA; PLAN, AND SECTIONS." ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. "FIRING CONTROL BLOCKHOUSE; STATION '0' AREA; PLAN, AND SECTIONS." Specifications No. ENG-04-353-57-75; Drawing No. AF-60-09-15; sheet 40 of 96; D.O. Series No. AF 1394/60, Rev. A. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract no. 5296 Rev. A, Date: 11/17/59. - Edwards Air Force Base, South Base Sled Track, Firing Control Blockhouse, South of Sled Track at east end, Lancaster, Los Angeles County, CA

A Comparative Evaluation of Anomaly Detection Algorithms for Maritime Video Surveillance

DTIC Science & Technology

2011-01-01

of k-means clustering and the k- NN Localized p-value Estimator ( KNN -LPE). K-means is a popular distance-based clustering algorithm while KNN -LPE...implemented the sparse cluster identification rule we described in Section 3.1. 2. k-NN Localized p-value Estimator ( KNN -LPE): We implemented this using...Average Density ( KNN -NAD): This was implemented as described in Section 3.4. Algorithm Parameter Settings The global and local density-based anomaly

Discrimination of Aspergillus niger and other Aspergillus species belonging to section Nigri by PCR assays.

PubMed

González-Salgado, Amaia; Patiño, Belén; Vázquez, Covadonga; González-Jaén, M Teresa

2005-04-15

Aspergillus species included in section Nigri are common in plant products and processed food, such as grapes, cereals, coffee and derivatives, particularly in warm and tropical climates. Two of these species, A. carbonarius and A. niger, are known to produce ochratoxin A (OTA), a potent nephrotoxin and carcinogenic to human (group 2B). Recognition of the several species of this section is difficult and requires considerable expertise using conventional methods based on morphological features. In this work we describe rapid, sensitive and robust assays based on the PCR technique to discriminate the main species included in section Nigri: A. japonicus, A. heteromorphus, A. ellipticus and the two morphologically indistinguishable species of the A. niger aggregate: A. niger and A. tubingensis. The species-specific primers have been designed on the basis of ITS (internal transcribed spacers of rDNA units) sequence comparisons obtained from several Aspergillus strains and have been tested in a number of strains from different origins and hosts. These PCR assays, based on multi-copy sequences, are highly sensitive and specific and represent a good tool for an early detection of OTA-producing Aspergillus species in order to prevent OTA from entering the food chain.

Unsteady Velocity Measurements in the NASA Research Low Speed Axial Compressor: Smooth Wall Configuration

NASA Technical Reports Server (NTRS)

Lepicovsky, Jan

2007-01-01

The report is a collection of experimental unsteady data acquired in the first stage of the NASA Low Speed Axial Compressor in configuration with smooth (solid) wall treatment over the first rotor. The aim of the report is to present a reliable experimental data base that can be used for analysis of the compressor flow behavior, and hopefully help with further improvements of compressor CFD codes. All data analysis is strictly restricted to verification of reliability of the experimental data reported. The report is divided into six main sections. First two sections cover the low speed axial compressor, the basic instrumentation, and the in-house developed methodology of unsteady velocity measurements using a thermo-anemometric split-fiber probe. The next two sections contain experimental data presented as averaged radial distributions for three compressor operation conditions, including the distribution of the total temperature rise over the first rotor, and ensemble averages of unsteady flow data based on a rotor blade passage period. Ensemble averages based on the rotor revolution period, and spectral analysis of unsteady flow parameters are presented in the last two sections. The report is completed with two appendices where performance and dynamic response of thermo-anemometric probes is discussed.

Measurement of the ϒ (1 S) production cross-section in pp collisions at √{ s} = 7 TeV in ATLAS

NASA Astrophysics Data System (ADS)

Aad, G.; Abbott, B.; Abdallah, J.; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; Abramowicz, H.; Abreu, H.; Acerbi, E.; Acharya, B. S.; Adams, D. L.; Addy, T. N.; Adelman, J.; Aderholz, M.; Adomeit, S.; Adragna, P.; Adye, T.; Aefsky, S.; Aguilar-Saavedra, J. A.; Aharrouche, M.; Ahlen, S. P.; Ahles, F.; Ahmad, A.; Ahsan, M.; Aielli, G.; Akdogan, T.; Åkesson, T. P. A.; Akimoto, G.; Akimov, A. V.; Akiyama, A.; Alam, M. S.; Alam, M. A.; Albrand, S.; Aleksa, M.; Aleksandrov, I. N.; Alessandria, F.; Alexa, C.; Alexander, G.; Alexandre, G.; Alexopoulos, T.; Alhroob, M.; Aliev, M.; Alimonti, G.; Alison, J.; Aliyev, M.; Allport, P. P.; Allwood-Spiers, S. E.; Almond, J.; Aloisio, A.; Alon, R.; Alonso, A.; Alviggi, M. G.; Amako, K.; Amaral, P.; Amelung, C.; Ammosov, V. V.; Amorim, A.; Amorós, G.; Amram, N.; Anastopoulos, C.; Andari, N.; Andeen, T.; Anders, C. F.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Andrieux, M.-L.; Anduaga, X. S.; Angerami, A.; Anghinolfi, F.; Anjos, N.; Annovi, A.; Antonaki, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoun, S.; Aperio Bella, L.; Apolle, R.; Arabidze, G.; Aracena, I.; Arai, Y.; Arce, A. T. H.; Archambault, J. P.; Arfaoui, S.; Arguin, J.-F.; Arik, E.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnault, C.; Artamonov, A.; Artoni, G.; Arutinov, D.; Asai, S.; Asfandiyarov, R.; Ask, S.; Åsman, B.; Asquith, L.; Assamagan, K.; Astbury, A.; Astvatsatourov, A.; Atoian, G.; Aubert, B.; Auerbach, B.; Auge, E.; Augsten, K.; Aurousseau, M.; Austin, N.; Avramidou, R.; Axen, D.; Ay, C.; Azuelos, G.; Azuma, Y.; Baak, M. A.; Baccaglioni, G.; Bacci, C.; Bach, A. M.; Bachacou, H.; Bachas, K.; Bachy, G.; Backes, M.; Backhaus, M.; Badescu, E.; Bagnaia, P.; Bahinipati, S.; Bai, Y.; Bailey, D. C.; Bain, T.; Baines, J. T.; Baker, O. K.; Baker, M. D.; Baker, S.; Baltasar Dos Santos Pedrosa, F.; Banas, E.; Banerjee, P.; Banerjee, Sw.; Banfi, D.; Bangert, A.; Bansal, V.; Bansil, H. S.; Barak, L.; Baranov, S. P.; Barashkou, A.; Barbaro Galtieri, A.; Barber, T.; Barberio, E. L.; Barberis, D.; Barbero, M.; Bardin, D. Y.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnett, B. M.; Barnett, R. M.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Barrillon, P.; Bartoldus, R.; Barton, A. E.; Bartsch, D.; Bartsch, V.; Bates, R. L.; Batkova, L.; Batley, J. R.; Battaglia, A.; Battistin, M.; Battistoni, G.; Bauer, F.; Bawa, H. S.; Beare, B.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Beckingham, M.; Becks, K. H.; Beddall, A. J.; Beddall, A.; Bedikian, S.; Bednyakov, V. A.; Bee, C. P.; Begel, M.; Behar Harpaz, S.; Behera, P. K.; Beimforde, M.; Belanger-Champagne, C.; Bell, P. J.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellina, F.; Bellomo, M.; Belloni, A.; Beloborodova, O.; Belotskiy, K.; Beltramello, O.; Ben Ami, S.; Benary, O.; Benchekroun, D.; Benchouk, C.; Bendel, M.; Benedict, B. H.; Benekos, N.; Benhammou, Y.; Benjamin, D. P.; Benoit, M.; Bensinger, J. R.; Benslama, K.; Bentvelsen, S.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Berglund, E.; Beringer, J.; Bernardet, K.; Bernat, P.; Bernhard, R.; Bernius, C.; Berry, T.; Bertin, A.; Bertinelli, F.; Bertolucci, F.; Besana, M. I.; Besson, N.; Bethke, S.; Bhimji, W.; Bianchi, R. M.; Bianco, M.; Biebel, O.; Bieniek, S. P.; Biesiada, J.; Biglietti, M.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biscarat, C.; Bitenc, U.; Black, K. M.; Blair, R. E.; Blanchard, J.-B.; Blanchot, G.; Blazek, T.; Blocker, C.; Blocki, J.; Blondel, A.; Blum, W.; Blumenschein, U.; Bobbink, G. J.; Bobrovnikov, V. B.; Bocchetta, S. S.; Bocci, A.; Boddy, C. R.; Boehler, M.; Boek, J.; Boelaert, N.; Böser, S.; Bogaerts, J. A.; Bogdanchikov, A.; Bogouch, A.; Bohm, C.; Boisvert, V.; Bold, T.; Boldea, V.; Bolnet, N. M.; Bona, M.; Bondarenko, V. G.; Boonekamp, M.; Boorman, G.; Booth, C. N.; Bordoni, S.; Borer, C.; Borisov, A.; Borissov, G.; Borjanovic, I.; Borroni, S.; Bos, K.; Boscherini, D.; Bosman, M.; Boterenbrood, H.; Botterill, D.; Bouchami, J.; Boudreau, J.; Bouhova-Thacker, E. V.; Boulahouache, C.; Bourdarios, C.; Bousson, N.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozhko, N. I.; Bozovic-Jelisavcic, I.; Bracinik, J.; Braem, A.; Branchini, P.; Brandenburg, G. W.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Brelier, B.; Bremer, J.; Brenner, R.; Bressler, S.; Breton, D.; Britton, D.; Brochu, F. M.; Brock, I.; Brock, R.; Brodbeck, T. J.; Brodet, E.; Broggi, F.; Bromberg, C.; Brooijmans, G.; Brooks, W. K.; Brown, G.; Brown, H.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Brunet, S.; Bruni, A.; Bruni, G.; Bruschi, M.; Buanes, T.; Bucci, F.; Buchanan, J.; Buchanan, N. J.; Buchholz, P.; Buckingham, R. M.; Buckley, A. G.; Buda, S. I.; Budagov, I. A.; Budick, B.; Büscher, V.; Bugge, L.; Buira-Clark, D.; Bulekov, O.; Bunse, M.; Buran, T.; Burckhart, H.; Burdin, S.; Burgess, T.; Burke, S.; Busato, E.; Bussey, P.; Buszello, C. P.; Butin, F.; Butler, B.; Butler, J. M.; Buttar, C. M.; Butterworth, J. M.; Buttinger, W.; Byatt, T.; Cabrera Urbán, S.; Caforio, D.; Cakir, O.; Calafiura, P.; Calderini, G.; Calfayan, P.; Calkins, R.; Caloba, L. P.; Caloi, R.; Calvet, D.; Calvet, S.; Camacho Toro, R.; Camarri, P.; Cambiaghi, M.; Cameron, D.; Campana, S.; Campanelli, M.; Canale, V.; Canelli, F.; Canepa, A.; Cantero, J.; Capasso, L.; Capeans Garrido, M. D. M.; Caprini, I.; Caprini, M.; Capriotti, D.; Capua, M.; Caputo, R.; Caramarcu, C.; Cardarelli, R.; Carli, T.; Carlino, G.; Carminati, L.; Caron, B.; Caron, S.; Carrillo Montoya, G. D.; Carter, A. A.; Carter, J. R.; Carvalho, J.; Casadei, D.; Casado, M. P.; Cascella, M.; Caso, C.; Castaneda Hernandez, A. M.; Castaneda-Miranda, E.; Castillo Gimenez, V.; Castro, N. F.; Cataldi, G.; Cataneo, F.; Catinaccio, A.; Catmore, J. R.; Cattai, A.; Cattani, G.; Caughron, S.; Cauz, D.; Cavalleri, P.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerqueira, A. S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cetin, S. A.; Cevenini, F.; Chafaq, A.; Chakraborty, D.; Chan, K.; Chapleau, B.; Chapman, J. D.; Chapman, J. W.; Chareyre, E.; Charlton, D. G.; Chavda, V.; Chavez Barajas, C. A.; Cheatham, S.; Chekanov, S.; Chekulaev, S. V.; Chelkov, G. A.; Chelstowska, M. A.; Chen, C.; Chen, H.; Chen, S.; Chen, T.; Chen, X.; Cheng, S.; Cheplakov, A.; Chepurnov, V. F.; Cherkaoui El Moursli, R.; Chernyatin, V.; Cheu, E.; Cheung, S. L.; Chevalier, L.; Chiefari, G.; Chikovani, L.; Childers, J. T.; Chilingarov, A.; Chiodini, G.; Chizhov, M. V.; Choudalakis, G.; Chouridou, S.; Christidi, I. A.; Christov, A.; Chromek-Burckhart, D.; Chu, M. L.; Chudoba, J.; Ciapetti, G.; Ciba, K.; Ciftci, A. K.; Ciftci, R.; Cinca, D.; Cindro, V.; Ciobotaru, M. D.; Ciocca, C.; Ciocio, A.; Cirilli, M.; Ciubancan, M.; Clark, A.; Clark, P. J.; Cleland, W.; Clemens, J. C.; Clement, B.; Clement, C.; Clifft, R. W.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coe, P.; Cogan, J. G.; Coggeshall, J.; Cogneras, E.; Cojocaru, C. D.; Colas, J.; Colijn, A. P.; Collard, C.; Collins, N. J.; Collins-Tooth, C.; Collot, J.; Colon, G.; Conde Muiño, P.; Coniavitis, E.; Conidi, M. C.; Consonni, M.; Consorti, V.; Constantinescu, S.; Conta, C.; Conventi, F.; Cook, J.; Cooke, M.; Cooper, B. D.; Cooper-Sarkar, A. M.; Cooper-Smith, N. J.; Copic, K.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M. J.; Costanzo, D.; Costin, T.; Côté, D.; Coura Torres, R.; Courneyea, L.; Cowan, G.; Cowden, C.; Cox, B. E.; Cranmer, K.; Crescioli, F.; Cristinziani, M.; Crosetti, G.; Crupi, R.; Crépé-Renaudin, S.; Cuciuc, C.-M.; Cuenca Almenar, C.; Cuhadar Donszelmann, T.; Cuneo, S.; Curatolo, M.; Curtis, C. J.; Cwetanski, P.; Czirr, H.; Czyczula, Z.; D'Auria, S.; D'Onofrio, M.; D'Orazio, A.; da Silva, P. V. M.; da Via, C.; Dabrowski, W.; Dai, T.; Dallapiccola, C.; Dam, M.; Dameri, M.; Damiani, D. S.; Danielsson, H. O.; Dannheim, D.; Dao, V.; Darbo, G.; Darlea, G. L.; Daum, C.; Dauvergne, J. P.; Davey, W.; Davidek, T.; Davidson, N.; Davidson, R.; Davies, E.; Davies, M.; Davison, A. R.; Davygora, Y.; Dawe, E.; Dawson, I.; Dawson, J. W.; Daya, R. K.; de, K.; de Asmundis, R.; de Castro, S.; de Castro Faria Salgado, P. E.; de Cecco, S.; de Graat, J.; de Groot, N.; de Jong, P.; de La Taille, C.; de la Torre, H.; de Lotto, B.; de Mora, L.; de Nooij, L.; de Oliveira Branco, M.; de Pedis, D.; de Saintignon, P.; de Salvo, A.; de Sanctis, U.; de Santo, A.; de Vivie de Regie, J. B.; Dean, S.; Dedovich, D. V.; Degenhardt, J.; Dehchar, M.; Deile, M.; Del Papa, C.; Del Peso, J.; Del Prete, T.; Deliyergiyev, M.; Dell'Acqua, A.; Dell'Asta, L.; Della Pietra, M.; Della Volpe, D.; Delmastro, M.; Delpierre, P.; Delruelle, N.; Delsart, P. A.; Deluca, C.; Demers, S.; Demichev, M.; Demirkoz, B.; Deng, J.; Denisov, S. P.; Derendarz, D.; Derkaoui, J. E.; Derue, F.; Dervan, P.; Desch, K.; Devetak, E.; Deviveiros, P. O.; Dewhurst, A.; Dewilde, B.; Dhaliwal, S.; Dhullipudi, R.; di Ciaccio, A.; di Ciaccio, L.; di Girolamo, A.; di Girolamo, B.; di Luise, S.; di Mattia, A.; di Micco, B.; di Nardo, R.; di Simone, A.; di Sipio, R.; Diaz, M. A.; Diblen, F.; Diehl, E. B.; Dietrich, J.; Dietzsch, T. A.; Diglio, S.; Dindar Yagci, K.; Dingfelder, J.; Dionisi, C.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djobava, T.; Do Vale, M. A. B.; Do Valle Wemans, A.; Doan, T. K. O.; Dobbs, M.; Dobinson, R.; Dobos, D.; Dobson, E.; Dobson, M.; Dodd, J.; Doglioni, C.; Doherty, T.; Doi, Y.; Dolejsi, J.; Dolenc, I.; Dolezal, Z.; Dolgoshein, B. A.; Dohmae, T.; Donadelli, M.; Donega, M.; Donini, J.; Dopke, J.; Doria, A.; Dos Anjos, A.; Dosil, M.; Dotti, A.; Dova, M. T.; Dowell, J. D.; Doxiadis, A. D.; Doyle, A. T.; Drasal, Z.; Drees, J.; Dressnandt, N.; Drevermann, H.; Driouichi, C.; Dris, M.; Dubbert, J.; Dubbs, T.; Dube, S.; Duchovni, E.; Duckeck, G.; Dudarev, A.; Dudziak, F.; Dührssen, M.; Duerdoth, I. P.; Duflot, L.; Dufour, M.-A.; Dunford, M.; Duran Yildiz, H.; Duxfield, R.; Dwuznik, M.; Dydak, F.; Dzahini, D.; Düren, M.; Ebenstein, W. L.; Ebke, J.; Eckert, S.; Eckweiler, S.; Edmonds, K.; Edwards, C. A.; Edwards, N. C.; Ehrenfeld, W.; Ehrich, T.; Eifert, T.; Eigen, G.; Einsweiler, K.; Eisenhandler, E.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Ellis, K.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Ely, R.; Emeliyanov, D.; Engelmann, R.; Engl, A.; Epp, B.; Eppig, A.; Erdmann, J.; Ereditato, A.; Eriksson, D.; Ernst, J.; Ernst, M.; Ernwein, J.; Errede, D.; Errede, S.; Ertel, E.; Escalier, M.; Escobar, C.; Espinal Curull, X.; Esposito, B.; Etienne, F.; Etienvre, A. I.; Etzion, E.; Evangelakou, D.; Evans, H.; Fabbri, L.; Fabre, C.; Fakhrutdinov, R. M.; Falciano, S.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farley, J.; Farooque, T.; Farrington, S. M.; Farthouat, P.; Fassnacht, P.; Fassouliotis, D.; Fatholahzadeh, B.; Favareto, A.; Fayard, L.; Fazio, S.; Febbraro, R.; Federic, P.; Fedin, O. L.; Fedorko, W.; Fehling-Kaschek, M.; Feligioni, L.; Fellmann, D.; Felzmann, C. U.; Feng, C.; Feng, E. J.; Fenyuk, A. B.; Ferencei, J.; Ferland, J.; Fernando, W.; Ferrag, S.; Ferrando, J.; Ferrara, V.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferrer, A.; Ferrer, M. L.; Ferrere, D.; Ferretti, C.; Ferretto Parodi, A.; Fiascaris, M.; Fiedler, F.; Filipčič, A.; Filippas, A.; Filthaut, F.; Fincke-Keeler, M.; Fiolhais, M. C. N.; Fiorini, L.; Firan, A.; Fischer, G.; Fischer, P.; Fisher, M. J.; Fisher, S. M.; Flechl, M.; Fleck, I.; Fleckner, J.; Fleischmann, P.; Fleischmann, S.; Flick, T.; Flores Castillo, L. R.; Flowerdew, M. J.; Föhlisch, F.; Fokitis, M.; Fonseca Martin, T.; Forbush, D. A.; Formica, A.; Forti, A.; Fortin, D.; Foster, J. M.; Fournier, D.; Foussat, A.; Fowler, A. J.; Fowler, K.; Fox, H.; Francavilla, P.; Franchino, S.; Francis, D.; Frank, T.; Franklin, M.; Franz, S.; Fraternali, M.; Fratina, S.; French, S. T.; Froeschl, R.; Froidevaux, D.; Frost, J. A.; Fukunaga, C.; Fullana Torregrosa, E.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gadfort, T.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Gallas, E. J.; Gallas, M. V.; Gallo, V.; Gallop, B. J.; Gallus, P.; Galyaev, E.; Gan, K. K.; Gao, Y. S.; Gapienko, V. A.; Gaponenko, A.; Garberson, F.; Garcia-Sciveres, M.; García, C.; García Navarro, J. E.; Gardner, R. W.; Garelli, N.; Garitaonandia, H.; Garonne, V.; Garvey, J.; Gatti, C.; Gaudio, G.; Gaumer, O.; Gaur, B.; Gauthier, L.; Gavrilenko, I. L.; Gay, C.; Gaycken, G.; Gayde, J.-C.; Gazis, E. N.; Ge, P.; Gee, C. N. P.; Geerts, D. A. A.; Geich-Gimbel, Ch.; Gellerstedt, K.; Gemme, C.; Gemmell, A.; Genest, M. H.; Gentile, S.; George, M.; George, S.; Gerlach, P.; Gershon, A.; Geweniger, C.; Ghazlane, H.; Ghez, P.; Ghodbane, N.; Giacobbe, B.; Giagu, S.; Giakoumopoulou, V.; Giangiobbe, V.; Gianotti, F.; Gibbard, B.; Gibson, A.; Gibson, S. M.; Gilbert, L. M.; Gilchriese, M.; Gilewsky, V.; Gillberg, D.; Gillman, A. R.; Gingrich, D. M.; Ginzburg, J.; Giokaris, N.; Giordano, R.; Giorgi, F. M.; Giovannini, P.; Giraud, P. F.; Giugni, D.; Giunta, M.; Giusti, P.; Gjelsten, B. K.; Gladilin, L. K.; Glasman, C.; Glatzer, J.; Glazov, A.; Glitza, K. W.; Glonti, G. L.; Godfrey, J.; Godlewski, J.; Goebel, M.; Göpfert, T.; Goeringer, C.; Gössling, C.; Göttfert, T.; Goldfarb, S.; Goldin, D.; Golling, T.; Golovnia, S. N.; Gomes, A.; Gomez Fajardo, L. S.; Gonçalo, R.; Goncalves Pinto Firmino da Costa, J.; Gonella, L.; Gonidec, A.; Gonzalez, S.; González de La Hoz, S.; Gonzalez Silva, M. L.; Gonzalez-Sevilla, S.; Goodson, J. J.; Goossens, L.; Gorbounov, P. A.; Gordon, H. A.; Gorelov, I.; Gorfine, G.; Gorini, B.; Gorini, E.; Gorišek, A.; Gornicki, E.; Gorokhov, S. A.; Goryachev, V. N.; Gosdzik, B.; Gosselink, M.; Gostkin, M. I.; Gouanère, M.; Gough Eschrich, I.; Gouighri, M.; Goujdami, D.; Goulette, M. P.; Goussiou, A. G.; Goy, C.; Grabowska-Bold, I.; Grabski, V.; Grafström, P.; Grah, C.; Grahn, K.-J.; Grancagnolo, F.; Grancagnolo, S.; Grassi, V.; Gratchev, V.; Grau, N.; Gray, H. M.; Gray, J. A.; Graziani, E.; Grebenyuk, O. G.; Greenfield, D.; Greenshaw, T.; Greenwood, Z. D.; Gregor, I. M.; Grenier, P.; Griffiths, J.; Grigalashvili, N.; Grillo, A. A.; Grinstein, S.; Grishkevich, Y. V.; Grivaz, J.-F.; Grognuz, J.; Groh, M.; Gross, E.; Grosse-Knetter, J.; Groth-Jensen, J.; Grybel, K.; Guarino, V. J.; Guest, D.; Guicheney, C.; Guida, A.; Guillemin, T.; Guindon, S.; Guler, H.; Gunther, J.; Guo, B.; Guo, J.; Gupta, A.; Gusakov, Y.; Gushchin, V. N.; Gutierrez, A.; Gutierrez, P.; Guttman, N.; Gutzwiller, O.; Guyot, C.; Gwenlan, C.; Gwilliam, C. B.; Haas, A.; Haas, S.; Haber, C.; Hackenburg, R.; Hadavand, H. K.; Hadley, D. R.; Haefner, P.; Hahn, F.; Haider, S.; Hajduk, Z.; Hakobyan, H.; Haller, J.; Hamacher, K.; Hamal, P.; Hamilton, A.; Hamilton, S.; Han, H.; Han, L.; Hanagaki, K.; Hance, M.; Handel, C.; Hanke, P.; Hansen, J. R.; Hansen, J. B.; Hansen, J. D.; Hansen, P. H.; Hansson, P.; Hara, K.; Hare, G. A.; Harenberg, T.; Harkusha, S.; Harper, D.; Harrington, R. D.; Harris, O. M.; Harrison, K.; Hartert, J.; Hartjes, F.; Haruyama, T.; Harvey, A.; Hasegawa, S.; Hasegawa, Y.; Hassani, S.; Hatch, M.; Hauff, D.; Haug, S.; Hauschild, M.; Hauser, R.; Havranek, M.; Hawes, B. M.; Hawkes, C. M.; Hawkings, R. J.; Hawkins, D.; Hayakawa, T.; Hayden, D.; Hayward, H. S.; Haywood, S. J.; Hazen, E.; He, M.; Head, S. J.; Hedberg, V.; Heelan, L.; Heim, S.; Heinemann, B.; Heisterkamp, S.; Helary, L.; Heller, M.; Hellman, S.; Helsens, C.; Henderson, R. C. W.; Henke, M.; Henrichs, A.; Henriques Correia, A. M.; Henrot-Versille, S.; Henry-Couannier, F.; Hensel, C.; Henß, T.; Hernandez, C. M.; Hernández Jiménez, Y.; Herrberg, R.; Hershenhorn, A. D.; Herten, G.; Hertenberger, R.; Hervas, L.; Hessey, N. P.; Hidvegi, A.; Higón-Rodriguez, E.; Hill, D.; Hill, J. C.; Hill, N.; Hiller, K. H.; Hillert, S.; Hillier, S. J.; Hinchliffe, I.; Hines, E.; Hirose, M.; Hirsch, F.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M. C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M. R.; Hoffman, J.; Hoffmann, D.; Hohlfeld, M.; Holder, M.; Holmes, A.; Holmgren, S. O.; Holy, T.; Holzbauer, J. L.; Homma, Y.; Hong, T. M.; Hooft van Huysduynen, L.; Horazdovsky, T.; Horn, C.; Horner, S.; Horton, K.; Hostachy, J.-Y.; Hou, S.; Houlden, M. A.; Hoummada, A.; Howarth, J.; Howell, D. F.; Hristova, I.; Hrivnac, J.; Hruska, I.; Hryn'ova, T.; Hsu, P. J.; Hsu, S.-C.; Huang, G. S.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Huffman, T. B.; Hughes, E. W.; Hughes, G.; Hughes-Jones, R. E.; Huhtinen, M.; Hurst, P.; Hurwitz, M.; Husemann, U.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibbotson, M.; Ibragimov, I.; Ichimiya, R.; Iconomidou-Fayard, L.; Idarraga, J.; Idzik, M.; Iengo, P.; Igonkina, O.; Ikegami, Y.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Imbault, D.; Imhaeuser, M.; Imori, M.; Ince, T.; Inigo-Golfin, J.; Ioannou, P.; Iodice, M.; Ionescu, G.; Irles Quiles, A.; Ishii, K.; Ishikawa, A.; Ishino, M.; Ishmukhametov, R.; Issever, C.; Istin, S.; Itoh, Y.; Ivashin, A. V.; Iwanski, W.; Iwasaki, H.; Izen, J. M.; Izzo, V.; Jackson, B.; Jackson, J. N.; Jackson, P.; Jaekel, M. R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakubek, J.; Jana, D. K.; Jankowski, E.; Jansen, E.; Jantsch, A.; Janus, M.; Jarlskog, G.; Jeanty, L.; Jelen, K.; Jen-La Plante, I.; Jenni, P.; Jeremie, A.; Jež, P.; Jézéquel, S.; Jha, M. K.; Ji, H.; Ji, W.; Jia, J.; Jiang, Y.; Jimenez Belenguer, M.; Jin, G.; Jin, S.; Jinnouchi, O.; Joergensen, M. D.; Joffe, D.; Johansen, L. G.; Johansen, M.; Johansson, K. E.; Johansson, P.; Johnert, S.; Johns, K. A.; Jon-And, K.; Jones, G.; Jones, R. W. L.; Jones, T. W.; Jones, T. J.; Jonsson, O.; Joram, C.; Jorge, P. M.; Joseph, J.; Jovin, T.; Ju, X.; Juranek, V.; Jussel, P.; Kabachenko, V. V.; Kabana, S.; Kaci, M.; Kaczmarska, A.; Kadlecik, P.; Kado, M.; Kagan, H.; Kagan, M.; Kaiser, S.; Kajomovitz, E.; Kalinin, S.; Kalinovskaya, L. V.; Kama, S.; Kanaya, N.; Kaneda, M.; Kanno, T.; Kantserov, V. A.; Kanzaki, J.; Kaplan, B.; Kapliy, A.; Kaplon, J.; Kar, D.; Karagoz, M.; Karnevskiy, M.; Karr, K.; Kartvelishvili, V.; Karyukhin, A. N.; Kashif, L.; Kasmi, A.; Kass, R. D.; Kastanas, A.; Kataoka, M.; Kataoka, Y.; Katsoufis, E.; Katzy, J.; Kaushik, V.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kayl, M. S.; Kazanin, V. A.; Kazarinov, M. Y.; Keates, J. R.; Keeler, R.; Kehoe, R.; Keil, M.; Kekelidze, G. D.; Kelly, M.; Kennedy, J.; Kenney, C. J.; Kenyon, M.; Kepka, O.; Kerschen, N.; Kerševan, B. P.; Kersten, S.; Kessoku, K.; Ketterer, C.; Keung, J.; Khakzad, M.; Khalil-Zada, F.; Khandanyan, H.; Khanov, A.; Kharchenko, D.; Khodinov, A.; Kholodenko, A. G.; Khomich, A.; Khoo, T. J.; Khoriauli, G.; Khoroshilov, A.; Khovanskiy, N.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kim, H.; Kim, M. S.; Kim, P. C.; Kim, S. H.; Kimura, N.; Kind, O.; King, B. T.; King, M.; King, R. S. B.; Kirk, J.; Kirsch, G. P.; Kirsch, L. E.; Kiryunin, A. E.; Kisielewska, D.; Kittelmann, T.; Kiver, A. M.; Kiyamura, H.; Kladiva, E.; Klaiber-Lodewigs, J.; Klein, M.; Klein, U.; Kleinknecht, K.; Klemetti, M.; Klier, A.; Klimentov, A.; Klingenberg, R.; Klinkby, E. B.; Klioutchnikova, T.; Klok, P. F.; Klous, S.; Kluge, E.-E.; Kluge, T.; Kluit, P.; Kluth, S.; Kneringer, E.; Knobloch, J.; Knoops, E. B. F. G.; Knue, A.; Ko, B. R.; Kobayashi, T.; Kobel, M.; Kocian, M.; Kocnar, A.; Kodys, P.; Köneke, K.; König, A. C.; Koenig, S.; Köpke, L.; Koetsveld, F.; Koevesarki, P.; Koffas, T.; Koffeman, E.; Kohn, F.; Kohout, Z.; Kohriki, T.; Koi, T.; Kokott, T.; Kolachev, G. M.; Kolanoski, H.; Kolesnikov, V.; Koletsou, I.; Koll, J.; Kollar, D.; Kollefrath, M.; Kolya, S. D.; Komar, A. A.; Komaragiri, J. R.; Komori, Y.; Kondo, T.; Kono, T.; Kononov, A. I.; Konoplich, R.; Konstantinidis, N.; Kootz, A.; Koperny, S.; Kopikov, S. V.; Korcyl, K.; Kordas, K.; Koreshev, V.; Korn, A.; Korol, A.; Korolkov, I.; Korolkova, E. V.; Korotkov, V. A.; Kortner, O.; Kortner, S.; Kostyukhin, V. V.; Kotamäki, M. J.; Kotov, S.; Kotov, V. M.; Kotwal, A.; Kourkoumelis, C.; Kouskoura, V.; Koutsman, A.; Kowalewski, R.; Kowalski, T. Z.; Kozanecki, W.; Kozhin, A. S.; Kral, V.; Kramarenko, V. A.; Kramberger, G.; Krasel, O.; Krasny, M. W.; Krasznahorkay, A.; Kraus, J.; Kreisel, A.; Krejci, F.; Kretzschmar, J.; Krieger, N.; Krieger, P.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Krüger, H.; Kruker, T.; Krumshteyn, Z. V.; Kruth, A.; Kubota, T.; Kuehn, S.; Kugel, A.; Kuhl, T.; Kuhn, D.; Kukhtin, V.; Kulchitsky, Y.; Kuleshov, S.; Kummer, C.; Kuna, M.; Kundu, N.; Kunkle, J.; Kupco, A.; Kurashige, H.; Kurata, M.; Kurochkin, Y. A.; Kus, V.; Kuykendall, W.; Kuze, M.; Kuzhir, P.; Kvasnicka, O.; Kvita, J.; Kwee, R.; La Rosa, A.; La Rotonda, L.; Labarga, L.; Labbe, J.; Lablak, S.; Lacasta, C.; Lacava, F.; Lacker, H.; Lacour, D.; Lacuesta, V. R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Laisne, E.; Lamanna, M.; Lampen, C. L.; Lampl, W.; Lancon, E.; Landgraf, U.; Landon, M. P. J.; Landsman, H.; Lane, J. L.; Lange, C.; Lankford, A. J.; Lanni, F.; Lantzsch, K.; Laplace, S.; Lapoire, C.; Laporte, J. F.; Lari, T.; Larionov, A. V.; Larner, A.; Lasseur, C.; Lassnig, M.; Lau, W.; Laurelli, P.; Lavorato, A.; Lavrijsen, W.; Laycock, P.; Lazarev, A. B.; Lazzaro, A.; Le Dortz, O.; Le Guirriec, E.; Le Maner, C.; Le Menedeu, E.; Lebel, C.; Lecompte, T.; Ledroit-Guillon, F.; Lee, H.; Lee, J. S. H.; Lee, S. C.; Lee, L.; Lefebvre, M.; Legendre, M.; Leger, A.; Legeyt, B. C.; Legger, F.; Leggett, C.; Lehmacher, M.; Lehmann Miotto, G.; Lei, X.; Leite, M. A. L.; Leitner, R.; Lellouch, D.; Lellouch, J.; Leltchouk, M.; Lendermann, V.; Leney, K. J. C.; Lenz, T.; Lenzen, G.; Lenzi, B.; Leonhardt, K.; Leontsinis, S.; Leroy, C.; Lessard, J.-R.; Lesser, J.; Lester, C. G.; Leung Fook Cheong, A.; Levêque, J.; Levin, D.; Levinson, L. J.; Levitski, M. S.; Lewandowska, M.; Lewis, A.; Lewis, G. H.; Leyko, A. M.; Leyton, M.; Li, B.; Li, H.; Li, S.; Li, X.; Liang, Z.; Liang, Z.; Liberti, B.; Lichard, P.; Lichtnecker, M.; Lie, K.; Liebig, W.; Lifshitz, R.; Lilley, J. N.; Limbach, C.; Limosani, A.; Limper, M.; Lin, S. C.; Linde, F.; Linnemann, J. T.; Lipeles, E.; Lipinsky, L.; Lipniacka, A.; Liss, T. M.; Lissauer, D.; Lister, A.; Litke, A. M.; Liu, C.; Liu, D.; Liu, H.; Liu, J. B.; Liu, M.; Liu, S.; Liu, Y.; Livan, M.; Livermore, S. S. A.; Lleres, A.; Llorente Merino, J.; Lloyd, S. L.; Lobodzinska, E.; Loch, P.; Lockman, W. S.; Lockwitz, S.; Loddenkoetter, T.; Loebinger, F. K.; Loginov, A.; Loh, C. W.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Loken, J.; Lombardo, V. P.; Long, R. E.; Lopes, L.; Lopez Mateos, D.; Losada, M.; Loscutoff, P.; Lo Sterzo, F.; Losty, M. J.; Lou, X.; Lounis, A.; Loureiro, K. F.; Love, J.; Love, P. A.; Lowe, A. J.; Lu, F.; Lubatti, H. J.; Luci, C.; Lucotte, A.; Ludwig, A.; Ludwig, D.; Ludwig, I.; Ludwig, J.; Luehring, F.; Luijckx, G.; Lumb, D.; Luminari, L.; Lund, E.; Lund-Jensen, B.; Lundberg, B.; Lundberg, J.; Lundquist, J.; Lungwitz, M.; Lupi, A.; Lutz, G.; Lynn, D.; Lys, J.; Lytken, E.; Ma, H.; Ma, L. L.; Macana Goia, J. A.; Maccarrone, G.; Macchiolo, A.; Maček, B.; Machado Miguens, J.; Macina, D.; Mackeprang, R.; Madaras, R. J.; Mader, W. F.; Maenner, R.; Maeno, T.; Mättig, P.; Mättig, S.; Magalhaes Martins, P. J.; Magnoni, L.; Magradze, E.; Mahalalel, Y.; Mahboubi, K.; Mahout, G.; Maiani, C.; Maidantchik, C.; Maio, A.; Majewski, S.; Makida, Y.; Makovec, N.; Mal, P.; Malecki, Pa.; Malecki, P.; Maleev, V. P.; Malek, F.; Mallik, U.; Malon, D.; Maltezos, S.; Malyshev, V.; Malyukov, S.; Mameghani, R.; Mamuzic, J.; Manabe, A.; Mandelli, L.; Mandić, I.; Mandrysch, R.; Maneira, J.; Mangeard, P. S.; Manjavidze, I. D.; Mann, A.; Manning, P. M.; Manousakis-Katsikakis, A.; Mansoulie, B.; Manz, A.; Mapelli, A.; Mapelli, L.; March, L.; Marchand, J. F.; Marchese, F.; Marchiori, G.; Marcisovsky, M.; Marin, A.; Marino, C. P.; Marroquim, F.; Marshall, R.; Marshall, Z.; Martens, F. K.; Marti-Garcia, S.; Martin, A. J.; Martin, B.; Martin, B.; Martin, F. F.; Martin, J. P.; Martin, Ph.; Martin, T. A.; Martin Dit Latour, B.; Martinez, M.; Martinez Outschoorn, V.; Martyniuk, A. C.; Marx, M.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A. L.; Maß, M.; Massa, I.; Massaro, G.; Massol, N.; Mastrandrea, P.; Mastroberardino, A.; Masubuchi, T.; Mathes, M.; Matricon, P.; Matsumoto, H.; Matsunaga, H.; Matsushita, T.; Mattravers, C.; Maugain, J. M.; Maxfield, S. J.; Maximov, D. A.; May, E. N.; Mayne, A.; Mazini, R.; Mazur, M.; Mazzanti, M.; Mazzoni, E.; Mc Kee, S. P.; McCarn, A.; McCarthy, R. L.; McCarthy, T. G.; McCubbin, N. A.; McFarlane, K. W.; McFayden, J. A.; McGlone, H.; McHedlidze, G.; McLaren, R. A.; McLaughlan, T.; McMahon, S. J.; McPherson, R. A.; Meade, A.; Mechnich, J.; Mechtel, M.; Medinnis, M.; Meera-Lebbai, R.; Meguro, T.; Mehdiyev, R.; Mehlhase, S.; Mehta, A.; Meier, K.; Meinhardt, J.; Meirose, B.; Melachrinos, C.; Mellado Garcia, B. R.; Mendoza Navas, L.; Meng, Z.; Mengarelli, A.; Menke, S.; Menot, C.; Meoni, E.; Mercurio, K. M.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F. S.; Messina, A.; Metcalfe, J.; Mete, A. S.; Meuser, S.; Meyer, C.; Meyer, J.-P.; Meyer, J.; Meyer, J.; Meyer, T. C.; Meyer, W. T.; Miao, J.; Michal, S.; Micu, L.; Middleton, R. P.; Miele, P.; Migas, S.; Mijović, L.; Mikenberg, G.; Mikestikova, M.; Mikuž, M.; Miller, D. W.; Miller, R. J.; Mills, W. J.; Mills, C.; Milov, A.; Milstead, D. A.; Milstein, D.; Minaenko, A. A.; Miñano, M.; Minashvili, I. A.; Mincer, A. I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L. M.; Mirabelli, G.; Miralles Verge, L.; Misiejuk, A.; Mitrevski, J.; Mitrofanov, G. Y.; Mitsou, V. A.; Mitsui, S.; Miyagawa, P. S.; Miyazaki, K.; Mjörnmark, J. U.; Moa, T.; Mockett, P.; Moed, S.; Moeller, V.; Mönig, K.; Möser, N.; Mohapatra, S.; Mohn, B.; Mohr, W.; Mohrdieck-Möck, S.; Moisseev, A. M.; Moles-Valls, R.; Molina-Perez, J.; Monk, J.; Monnier, E.; Montesano, S.; Monticelli, F.; Monzani, S.; Moore, R. W.; Moorhead, G. F.; Mora Herrera, C.; Moraes, A.; Morais, A.; Morange, N.; Morel, J.; Morello, G.; Moreno, D.; Moreno Llácer, M.; Morettini, P.; Morii, M.; Morin, J.; Morita, Y.; Morley, A. K.; Mornacchi, G.; Morone, M.-C.; Morozov, S. V.; Morris, J. D.; Morvaj, L.; Moser, H. G.; Mosidze, M.; Moss, J.; Mount, R.; Mountricha, E.; Mouraviev, S. V.; Moyse, E. J. W.; Mudrinic, M.; Mueller, F.; Mueller, J.; Mueller, K.; Müller, T. A.; Muenstermann, D.; Muijs, A.; Muir, A.; Munwes, Y.; Murakami, K.; Murray, W. J.; Mussche, I.; Musto, E.; Myagkov, A. G.; Myska, M.; Nadal, J.; Nagai, K.; Nagano, K.; Nagasaka, Y.; Nairz, A. M.; Nakahama, Y.; Nakamura, K.; Nakano, I.; Nanava, G.; Napier, A.; Nash, M.; Nation, N. R.; Nattermann, T.; Naumann, T.; Navarro, G.; Neal, H. A.; Nebot, E.; Nechaeva, P. Yu.; Negri, A.; Negri, G.; Nektarijevic, S.; Nelson, A.; Nelson, S.; Nelson, T. K.; Nemecek, S.; Nemethy, P.; Nepomuceno, A. A.; Nessi, M.; Nesterov, S. Y.; Neubauer, M. S.; Neusiedl, A.; Neves, R. M.; Nevski, P.; Newman, P. R.; Nickerson, R. B.; Nicolaidou, R.; Nicolas, L.; Nicquevert, B.; Niedercorn, F.; Nielsen, J.; Niinikoski, T.; Nikiforov, A.; Nikolaenko, V.; Nikolaev, K.; Nikolic-Audit, I.; Nikolics, K.; Nikolopoulos, K.; Nilsen, H.; Nilsson, P.; Ninomiya, Y.; Nisati, A.; Nishiyama, T.; Nisius, R.; Nodulman, L.; Nomachi, M.; Nomidis, I.; Nordberg, M.; Nordkvist, B.; Norton, P. R.; Novakova, J.; Nozaki, M.; Nožička, M.; Nozka, L.; Nugent, I. M.; Nuncio-Quiroz, A.-E.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; Nyman, T.; O'Brien, B. J.; O'Neale, S. W.; O'Neil, D. C.; O'Shea, V.; Oakham, F. G.; Oberlack, H.; Ocariz, J.; Ochi, A.; Oda, S.; Odaka, S.; Odier, J.; Ogren, H.; Oh, A.; Oh, S. H.; Ohm, C. C.; Ohshima, T.; Ohshita, H.; Ohska, T. K.; Ohsugi, T.; Okada, S.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olcese, M.; Olchevski, A. G.; Oliveira, M.; Oliveira Damazio, D.; Oliver Garcia, E.; Olivito, D.; Olszewski, A.; Olszowska, J.; Omachi, C.; Onofre, A.; Onyisi, P. U. E.; Oram, C. J.; Oreglia, M. J.; Oren, Y.; Orestano, D.; Orlov, I.; Oropeza Barrera, C.; Orr, R. S.; Osculati, B.; Ospanov, R.; Osuna, C.; Otero Y Garzon, G.; P Ottersbach, J.; Ouchrif, M.; Ould-Saada, F.; Ouraou, A.; Ouyang, Q.; Owen, M.; Owen, S.; Øye, O. K.; Ozcan, V. E.; Ozturk, N.; Pacheco Pages, A.; Padilla Aranda, C.; Pagan Griso, S.; Paganis, E.; Paige, F.; Pajchel, K.; Palestini, S.; Pallin, D.; Palma, A.; Palmer, J. D.; Pan, Y. B.; Panagiotopoulou, E.; Panes, B.; Panikashvili, N.; Panitkin, S.; Pantea, D.; Panuskova, M.; Paolone, V.; Papadelis, A.; Papadopoulou, Th. D.; Paramonov, A.; Park, W.; Parker, M. A.; Parodi, F.; Parsons, J. A.; Parzefall, U.; Pasqualucci, E.; Passeri, A.; Pastore, F.; Pastore, Fr.; Pásztor, G.; Pataraia, S.; Patel, N.; Pater, J. R.; Patricelli, S.; Pauly, T.; Pecsy, M.; Pedraza Morales, M. I.; Peleganchuk, S. V.; Peng, H.; Pengo, R.; Penson, A.; Penwell, J.; Perantoni, M.; Perez, K.; Perez Cavalcanti, T.; Perez Codina, E.; Pérez García-Estañ, M. T.; Perez Reale, V.; Perini, L.; Pernegger, H.; Perrino, R.; Perrodo, P.; Persembe, S.; Peshekhonov, V. D.; Peters, O.; Petersen, B. A.; Petersen, J.; Petersen, T. C.; Petit, E.; Petridis, A.; Petridou, C.; Petrolo, E.; Petrucci, F.; Petschull, D.; Petteni, M.; Pezoa, R.; Phan, A.; Phillips, A. W.; Phillips, P. W.; Piacquadio, G.; Piccaro, E.; Piccinini, M.; Pickford, A.; Piec, S. M.; Piegaia, R.; Pilcher, J. E.; Pilkington, A. D.; Pina, J.; Pinamonti, M.; Pinder, A.; Pinfold, J. L.; Ping, J.; Pinto, B.; Pirotte, O.; Pizio, C.; Placakyte, R.; Plamondon, M.; Plano, W. G.; Pleier, M.-A.; Pleskach, A. V.; Poblaguev, A.; Poddar, S.; Podlyski, F.; Poggioli, L.; Poghosyan, T.; Pohl, M.; Polci, F.; Polesello, G.; Policicchio, A.; Polini, A.; Poll, J.; Polychronakos, V.; Pomarede, D. M.; Pomeroy, D.; Pommès, K.; Pontecorvo, L.; Pope, B. G.; Popeneciu, G. A.; Popovic, D. S.; Poppleton, A.; Portell Bueso, X.; Porter, R.; Posch, C.; Pospelov, G. E.; Pospisil, S.; Potrap, I. N.; Potter, C. J.; Potter, C. T.; Poulard, G.; Poveda, J.; Prabhu, R.; Pralavorio, P.; Prasad, S.; Pravahan, R.; Prell, S.; Pretzl, K.; Pribyl, L.; Price, D.; Price, L. E.; Price, M. J.; Prichard, P. M.; Prieur, D.; Primavera, M.; Prokofiev, K.; Prokoshin, F.; Protopopescu, S.; Proudfoot, J.; Prudent, X.; Przysiezniak, H.; Psoroulas, S.; Ptacek, E.; Purdham, J.; Purohit, M.; Puzo, P.; Pylypchenko, Y.; Qian, J.; Qian, Z.; Qin, Z.; Quadt, A.; Quarrie, D. R.; Quayle, W. B.; Quinonez, F.; Raas, M.; Radescu, V.; Radics, B.; Rador, T.; Ragusa, F.; Rahal, G.; Rahimi, A. M.; Rahm, D.; Rajagopalan, S.; Rammensee, M.; Rammes, M.; Ramstedt, M.; Randrianarivony, K.; Ratoff, P. N.; Rauscher, F.; Rauter, E.; Raymond, M.; Read, A. L.; Rebuzzi, D. M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Reichold, A.; Reinherz-Aronis, E.; Reinsch, A.; Reisinger, I.; Reljic, D.; Rembser, C.; Ren, Z. L.; Renaud, A.; Renkel, P.; Rescigno, M.; Resconi, S.; Resende, B.; Reznicek, P.; Rezvani, R.; Richards, A.; Richter, R.; Richter-Was, E.; Ridel, M.; Rieke, S.; Rijpstra, M.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Rios, R. R.; Riu, I.; Rivoltella, G.; Rizatdinova, F.; Rizvi, E.; Robertson, S. H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, J. E. M.; Robinson, M.; Robson, A.; Rocha de Lima, J. G.; Roda, C.; Roda Dos Santos, D.; Rodier, S.; Rodriguez, D.; Rodriguez Garcia, Y.; Roe, A.; Roe, S.; Røhne, O.; Rojo, V.; Rolli, S.; Romaniouk, A.; Romanov, V. M.; Romeo, G.; Romero Maltrana, D.; Roos, L.; Ros, E.; Rosati, S.; Rosbach, K.; Rose, M.; Rosenbaum, G. A.; Rosenberg, E. I.; Rosendahl, P. L.; Rosselet, L.; Rossetti, V.; Rossi, E.; Rossi, L. P.; Rossi, L.; Rotaru, M.; Roth, I.; Rothberg, J.; Rousseau, D.; Royon, C. R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Rubinskiy, I.; Ruckert, B.; Ruckstuhl, N.; Rud, V. I.; Rudolph, C.; Rudolph, G.; Rühr, F.; Ruggieri, F.; Ruiz-Martinez, A.; Rulikowska-Zarebska, E.; Rumiantsev, V.; Rumyantsev, L.; Runge, K.; Runolfsson, O.; Rurikova, Z.; Rusakovich, N. A.; Rust, D. R.; Rutherfoord, J. P.; Ruwiedel, C.; Ruzicka, P.; Ryabov, Y. F.; Ryadovikov, V.; Ryan, P.; Rybar, M.; Rybkin, G.; Ryder, N. C.; Rzaeva, S.; Saavedra, A. F.; Sadeh, I.; Sadrozinski, H. F.-W.; Sadykov, R.; Safai Tehrani, F.; Sakamoto, H.; Salamanna, G.; Salamon, A.; Saleem, M.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvachua Ferrando, B. M.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sampsonidis, D.; Samset, B. H.; Sanchez, A.; Sandaker, H.; Sander, H. G.; Sanders, M. P.; Sandhoff, M.; Sandoval, T.; Sandstroem, R.; Sandvoss, S.; Sankey, D. P. C.; Sansoni, A.; Santamarina Rios, C.; Santoni, C.; Santonico, R.; Santos, H.; Saraiva, J. G.; Sarangi, T.; Sarkisyan-Grinbaum, E.; Sarri, F.; Sartisohn, G.; Sasaki, O.; Sasaki, T.; Sasao, N.; Satsounkevitch, I.; Sauvage, G.; Sauvan, E.; Sauvan, J. B.; Savard, P.; Savinov, V.; Savu, D. O.; Savva, P.; Sawyer, L.; Saxon, D. H.; Says, L. P.; Sbarra, C.; Sbrizzi, A.; Scallon, O.; Scannicchio, D. A.; Schaarschmidt, J.; Schacht, P.; Schäfer, U.; Schaepe, S.; Schaetzel, S.; Schaffer, A. C.; Schaile, D.; Schamberger, R. D.; Schamov, A. G.; Scharf, V.; Schegelsky, V. A.; Scheirich, D.; Scherzer, M. I.; Schiavi, C.; Schieck, J.; Schioppa, M.; Schlenker, S.; Schlereth, J. L.; Schmidt, E.; Schmieden, K.; Schmitt, C.; Schmitt, S.; Schmitz, M.; Schöning, A.; Schott, M.; Schouten, D.; Schovancova, J.; Schram, M.; Schroeder, C.; Schroer, N.; Schuh, S.; Schuler, G.; Schultes, J.; Schultz-Coulon, H.-C.; Schulz, H.; Schumacher, J. W.; Schumacher, M.; Schumm, B. A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwemling, Ph.; Schwienhorst, R.; Schwierz, R.; Schwindling, J.; Scott, W. G.; Searcy, J.; Sedykh, E.; Segura, E.; Seidel, S. C.; Seiden, A.; Seifert, F.; Seixas, J. M.; Sekhniaidze, G.; Seliverstov, D. M.; Sellden, B.; Sellers, G.; Seman, M.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Seuster, R.; Severini, H.; Sevior, M. E.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L. Y.; Shank, J. T.; Shao, Q. T.; Shapiro, M.; Shatalov, P. B.; Shaver, L.; Shaw, C.; Shaw, K.; Sherman, D.; Sherwood, P.; Shibata, A.; Shichi, H.; Shimizu, S.; Shimojima, M.; Shin, T.; Shmeleva, A.; Shochet, M. J.; Short, D.; Shupe, M. A.; Sicho, P.; Sidoti, A.; Siebel, A.; Siegert, F.; Siegrist, J.; Sijacki, Dj.; Silbert, O.; Silva, J.; Silver, Y.; Silverstein, D.; Silverstein, S. B.; Simak, V.; Simard, O.; Simic, Lj.; Simion, S.; Simmons, B.; Simonyan, M.; Sinervo, P.; Sinev, N. B.; Sipica, V.; Siragusa, G.; Sisakyan, A. N.; Sivoklokov, S. Yu.; Sjölin, J.; Sjursen, T. B.; Skinnari, L. A.; Skovpen, K.; Skubic, P.; Skvorodnev, N.; Slater, M.; Slavicek, T.; Sliwa, K.; Sloan, T. J.; Sloper, J.; Smakhtin, V.; Smirnov, S. Yu.; Smirnova, L. N.; Smirnova, O.; Smith, B. C.; Smith, D.; Smith, K. M.; Smizanska, M.; Smolek, K.; Snesarev, A. A.; Snow, S. W.; Snow, J.; Snuverink, J.; Snyder, S.; Soares, M.; Sobie, R.; Sodomka, J.; Soffer, A.; Solans, C. A.; Solar, M.; Solc, J.; Soldatov, E.; Soldevila, U.; Solfaroli Camillocci, E.; Solodkov, A. A.; Solovyanov, O. V.; Sondericker, J.; Soni, N.; Sopko, V.; Sopko, B.; Sorbi, M.; Sosebee, M.; Soukharev, A.; Spagnolo, S.; Spanò, F.; Spighi, R.; Spigo, G.; Spila, F.; Spiriti, E.; Spiwoks, R.; Spousta, M.; Spreitzer, T.; Spurlock, B.; Denis, R. D. St.; Stahl, T.; Stahlman, J.; Stamen, R.; Stanecka, E.; Stanek, R. W.; Stanescu, C.; Stapnes, S.; Starchenko, E. A.; Stark, J.; Staroba, P.; Starovoitov, P.; Staude, A.; Stavina, P.; Stavropoulos, G.; Steele, G.; Steinbach, P.; Steinberg, P.; Stekl, I.; Stelzer, B.; Stelzer, H. J.; Stelzer-Chilton, O.; Stenzel, H.; Stevenson, K.; Stewart, G. A.; Stillings, J. A.; Stockmanns, T.; Stockton, M. C.; Stoerig, K.; Stoicea, G.; Stonjek, S.; Strachota, P.; Stradling, A. R.; Straessner, A.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strang, M.; Strauss, E.; Strauss, M.; Strizenec, P.; Ströhmer, R.; Strom, D. M.; Strong, J. A.; Stroynowski, R.; Strube, J.; Stugu, B.; Stumer, I.; Stupak, J.; Sturm, P.; Soh, D. A.; Su, D.; Subramania, H. S.; Succurro, A.; Sugaya, Y.; Sugimoto, T.; Suhr, C.; Suita, K.; Suk, M.; Sulin, V. V.; Sultansoy, S.; Sumida, T.; Sun, X.; Sundermann, J. E.; Suruliz, K.; Sushkov, S.; Susinno, G.; Sutton, M. R.; Suzuki, Y.; Svatos, M.; Sviridov, Yu. M.; Swedish, S.; Sykora, I.; Sykora, T.; Szeless, B.; Sánchez, J.; Ta, D.; Tackmann, K.; Taffard, A.; Tafirout, R.; Taga, A.; Taiblum, N.; Takahashi, Y.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Talby, M.; Talyshev, A.; Tamsett, M. C.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tanaka, S.; Tanaka, Y.; Tani, K.; Tannoury, N.; Tappern, G. P.; Tapprogge, S.; Tardif, D.; Tarem, S.; Tarrade, F.; Tartarelli, G. F.; Tas, P.; Tasevsky, M.; Tassi, E.; Tatarkhanov, M.; Taylor, C.; Taylor, F. E.; Taylor, G. N.; Taylor, W.; Teixeira Dias Castanheira, M.; Teixeira-Dias, P.; Temming, K. K.; Ten Kate, H.; Teng, P. K.; Terada, S.; Terashi, K.; Terron, J.; Terwort, M.; Testa, M.; Teuscher, R. J.; Thadome, J.; Therhaag, J.; Theveneaux-Pelzer, T.; Thioye, M.; Thoma, S.; Thomas, J. P.; Thompson, E. N.; Thompson, P. D.; Thompson, P. D.; Thompson, A. S.; Thomson, E.; Thomson, M.; Thun, R. P.; Tic, T.; Tikhomirov, V. O.; Tikhonov, Y. A.; Timmermans, C. J. W. P.; Tipton, P.; Tique Aires Viegas, F. J.; Tisserant, S.; Tobias, J.; Toczek, B.; Todorov, T.; Todorova-Nova, S.; Toggerson, B.; Tojo, J.; Tokár, S.; Tokunaga, K.; Tokushuku, K.; Tollefson, K.; Tomoto, M.; Tompkins, L.; Toms, K.; Tong, G.; Tonoyan, A.; Topfel, C.; Topilin, N. D.; Torchiani, I.; Torrence, E.; Torres, H.; Torró Pastor, E.; Toth, J.; Touchard, F.; Tovey, D. R.; Traynor, D.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I. M.; Trincaz-Duvoid, S.; Trinh, T. N.; Tripiana, M. F.; Trischuk, W.; Trivedi, A.; Trocmé, B.; Troncon, C.; Trottier-McDonald, M.; Trzupek, A.; Tsarouchas, C.; Tseng, J. C.-L.; Tsiakiris, M.; Tsiareshka, P. V.; Tsionou, D.; Tsipolitis, G.; Tsiskaridze, V.; Tskhadadze, E. G.; Tsukerman, I. I.; Tsulaia, V.; Tsung, J.-W.; Tsuno, S.; Tsybychev, D.; Tua, A.; Tuggle, J. M.; Turala, M.; Turecek, D.; Turk Cakir, I.; Turlay, E.; Turra, R.; Tuts, P. M.; Tykhonov, A.; Tylmad, M.; Tyndel, M.; Tyrvainen, H.; Tzanakos, G.; Uchida, K.; Ueda, I.; Ueno, R.; Ugland, M.; Uhlenbrock, M.; Uhrmacher, M.; Ukegawa, F.; Unal, G.; Underwood, D. G.; Undrus, A.; Unel, G.; Unno, Y.; Urbaniec, D.; Urkovsky, E.; Urrejola, P.; Usai, G.; Uslenghi, M.; Vacavant, L.; Vacek, V.; Vachon, B.; Vahsen, S.; Valenta, J.; Valente, P.; Valentinetti, S.; Valkar, S.; Valladolid Gallego, E.; Vallecorsa, S.; Valls Ferrer, J. A.; van der Graaf, H.; van der Kraaij, E.; van der Leeuw, R.; van der Poel, E.; van der Ster, D.; van Eijk, B.; van Eldik, N.; van Gemmeren, P.; van Kesteren, Z.; van Vulpen, I.; Vandelli, W.; Vandoni, G.; Vaniachine, A.; Vankov, P.; Vannucci, F.; Varela Rodriguez, F.; Vari, R.; Varnes, E. W.; Varouchas, D.; Vartapetian, A.; Varvell, K. E.; Vassilakopoulos, V. I.; Vazeille, F.; Vegni, G.; Veillet, J. J.; Vellidis, C.; Veloso, F.; Veness, R.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J. C.; Vest, A.; Vetterli, M. C.; Vichou, I.; Vickey, T.; Viehhauser, G. H. A.; Viel, S.; Villa, M.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M. G.; Vinek, E.; Vinogradov, V. B.; Virchaux, M.; Virzi, J.; Vitells, O.; Viti, M.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vlasak, M.; Vlasov, N.; Vogel, A.; Vokac, P.; Volpi, G.; Volpi, M.; Volpini, G.; von der Schmitt, H.; von Loeben, J.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorobiev, A. P.; Vorwerk, V.; Vos, M.; Voss, R.; Voss, T. T.; Vossebeld, J. H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vu Anh, T.; Vuillermet, R.; Vukotic, I.; Wagner, W.; Wagner, P.; Wahlen, H.; Wakabayashi, J.; Walbersloh, J.; Walch, S.; Walder, J.; Walker, R.; Walkowiak, W.; Wall, R.; Waller, P.; Wang, C.; Wang, H.; Wang, H.; Wang, J.; Wang, J.; Wang, J. C.; Wang, R.; Wang, S. M.; Warburton, A.; Ward, C. P.; Warsinsky, M.; Watkins, P. M.; Watson, A. T.; Watson, M. F.; Watts, G.; Watts, S.; Waugh, A. T.; Waugh, B. M.; Weber, J.; Weber, M.; Weber, M. S.; Weber, P.; Weidberg, A. R.; Weigell, P.; Weingarten, J.; Weiser, C.; Wellenstein, H.; Wells, P. S.; Wen, M.; Wenaus, T.; Wendler, S.; Weng, Z.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Werth, M.; Wessels, M.; Weydert, C.; Whalen, K.; Wheeler-Ellis, S. J.; Whitaker, S. P.; White, A.; White, M. J.; White, S.; Whitehead, S. R.; Whiteson, D.; Whittington, D.; Wicek, F.; Wicke, D.; Wickens, F. J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik, L. A. M.; Wijeratne, P. A.; Wildauer, A.; Wildt, M. A.; Wilhelm, I.; Wilkens, H. G.; Will, J. Z.; Williams, E.; Williams, H. H.; Willis, W.; Willocq, S.; Wilson, J. A.; Wilson, M. G.; Wilson, A.; Wingerter-Seez, I.; Winkelmann, S.; Winklmeier, F.; Wittgen, M.; Wolter, M. W.; Wolters, H.; Wooden, G.; Wosiek, B. K.; Wotschack, J.; Woudstra, M. J.; Wraight, K.; Wright, C.; Wrona, B.; Wu, S. L.; Wu, X.; Wu, Y.; Wulf, E.; Wunstorf, R.; Wynne, B. M.; Xaplanteris, L.; Xella, S.; Xie, S.; Xie, Y.; Xu, C.; Xu, D.; Xu, G.; Yabsley, B.; Yamada, M.; Yamamoto, A.; Yamamoto, K.; Yamamoto, S.; Yamamura, T.; Yamaoka, J.; Yamazaki, T.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, U. K.; Yang, Y.; Yang, Y.; Yang, Z.; Yanush, S.; Yao, W.-M.; Yao, Y.; Yasu, Y.; Ybeles Smit, G. V.; Ye, J.; Ye, S.; Yilmaz, M.; Yoosoofmiya, R.; Yorita, K.; Yoshida, R.; Young, C.; Youssef, S.; Yu, D.; Yu, J.; Yu, J.; Yuan, L.; Yurkewicz, A.; Zaets, V. G.; Zaidan, R.; Zaitsev, A. M.; Zajacova, Z.; Zalite, Yo. K.; Zanello, L.; Zarzhitsky, P.; Zaytsev, A.; Zeitnitz, C.; Zeller, M.; Zemla, A.; Zendler, C.; Zenin, A. V.; Zenin, O.; Ženiš, T.; Zenonos, Z.; Zenz, S.; Zerwas, D.; Zevi Della Porta, G.; Zhan, Z.; Zhang, D.; Zhang, H.; Zhang, J.; Zhang, X.; Zhang, Z.; Zhao, L.; Zhao, T.; Zhao, Z.; Zhemchugov, A.; Zheng, S.; Zhong, J.; Zhou, B.; Zhou, N.; Zhou, Y.; Zhu, C. G.; Zhu, H.; Zhu, J.; Zhu, Y.; Zhuang, X.; Zhuravlov, V.; Zieminska, D.; Zimmermann, R.; Zimmermann, S.; Zimmermann, S.; Ziolkowski, M.; Zitoun, R.; Živković, L.; Zmouchko, V. V.; Zobernig, G.; Zoccoli, A.; Zolnierowski, Y.; Zsenei, A.; Zur Nedden, M.; Zutshi, V.; Zwalinski, L.; Atlas Collaboration

2011-11-01

A measurement of the cross-section for ϒ (1 S) →μ+μ- production in proton-proton collisions at centre of mass energy of 7 TeV is presented. The cross-section is measured as a function of the ϒ (1 S) transverse momentum in two bins of rapidity, |y ϒ (1 S) | < 1.2 and 1.2 < |y ϒ (1 S) | < 2.4. The measurement requires that both muons have transverse momentum pTμ > 4 GeV and pseudorapidity |ημ | < 2.5 in order to reduce theoretical uncertainties on the acceptance, which depend on the poorly known polarisation. The results are based on an integrated luminosity of 1.13 pb-1, collected with the ATLAS detector at the Large Hadron Collider. The cross-section measurement is compared to theoretical predictions: it agrees to within a factor of two with a prediction based on the NRQCD model including colour-singlet and colour-octet matrix elements as implemented in PYTHIA while it disagrees by up to a factor of ten with the next-to-leading order prediction based on the colour-singlet model.

13 CFR 120.1000 - Risk-Based Lender Oversight.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Risk-Based Lender Oversight. 120.1000 Section 120.1000 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Risk-Based Lender Oversight Supervision § 120.1000 Risk-Based Lender Oversight. (a) Risk-Based Lender...

32 CFR 989.25 - Base closure and realignment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Base closure and realignment. 989.25 Section 989... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.25 Base closure and realignment. Base closure or realignment may entail special requirements for environmental analysis. The permanent base closure...

32 CFR 989.25 - Base closure and realignment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Base closure and realignment. 989.25 Section 989... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.25 Base closure and realignment. Base closure or realignment may entail special requirements for environmental analysis. The permanent base closure...

Direct charge radioisotope activation and power generation

DOEpatents

Lal, Amit; Li, Hui; Blanchard, James P.; Henderson, Douglass L.

2002-01-01

An activator has a base on which is mounted an elastically deformable micromechanical element that has a section that is free to be displaced toward the base. An absorber of radioactively emitted particles is formed on the base or the displaceable section of the deformable element and a source is formed on the other of the displaceable section or the base facing the absorber across a small gap. The radioactive source emits charged particles such as electrons, resulting in a buildup of charge on the absorber, drawing the absorber and source together and storing mechanical energy as the deformable element is bent. When the force between the absorber and the source is sufficient to bring the absorber into effective electrical contact with the source, discharge of the charge between the source and absorber allows the deformable element to spring back, releasing the mechanical energy stored in the element. An electrical generator such as a piezoelectric transducer may be secured to the deformable element to convert the released mechanical energy to electrical energy that can be used to provide power to electronic circuits.

Accelerator-based neutrino oscillation experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Deborah A.; /Fermilab

2007-12-01

Neutrino oscillations were first discovered by experiments looking at neutrinos coming from extra-terrestrial sources, namely the sun and the atmosphere, but we will be depending on earth-based sources to take many of the next steps in this field. This article describes what has been learned so far from accelerator-based neutrino oscillation experiments, and then describe very generally what the next accelerator-based steps are. In section 2 the article discusses how one uses an accelerator to make a neutrino beam, in particular, one made from decays in flight of charged pions. There are several different neutrino detection methods currently in use,more » or under development. In section 3 these are presented, with a description of the general concept, an example of such a detector, and then a brief discussion of the outstanding issues associated with this detection technique. Finally, section 4 describes how the measurements of oscillation probabilities are made. This includes a description of the near detector technique and how it can be used to make the most precise measurements of neutrino oscillations.« less

Panorama, section 2 of 3, note the Operations Building (Facility ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Panorama, section 2 of 3, note the Operations Building (Facility 294) in the center of facility, view facing west - U.S. Naval Base, Pearl Harbor, Naval Radio Station, AF/FRD-10 Circularly Disposed Antenna Array, Wahiawa, Honolulu County, HI

14 CFR 13.127 - Reports, decisions and orders.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Section 13.127 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Investigation § 13.127 Reports, decisions and orders. The Presiding Officer shall issue a written report based... publication as prescribed by section 313(b) of the Federal Aviation Act. ...

14 CFR 13.127 - Reports, decisions and orders.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 13.127 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Investigation § 13.127 Reports, decisions and orders. The Presiding Officer shall issue a written report based... publication as prescribed by section 313(b) of the Federal Aviation Act. ...

14 CFR 13.127 - Reports, decisions and orders.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Section 13.127 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Investigation § 13.127 Reports, decisions and orders. The Presiding Officer shall issue a written report based... publication as prescribed by section 313(b) of the Federal Aviation Act. ...

14 CFR 13.127 - Reports, decisions and orders.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Section 13.127 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Investigation § 13.127 Reports, decisions and orders. The Presiding Officer shall issue a written report based... publication as prescribed by section 313(b) of the Federal Aviation Act. ...

14 CFR 13.127 - Reports, decisions and orders.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Section 13.127 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Investigation § 13.127 Reports, decisions and orders. The Presiding Officer shall issue a written report based... publication as prescribed by section 313(b) of the Federal Aviation Act. ...

47 CFR 24.103 - Construction requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false Construction requirements. 24.103 Section 24... COMMUNICATIONS SERVICES Narrowband PCS § 24.103 Construction requirements. (a) Nationwide narrowband PCS... compliance with the construction requirements set forth in this section, licensees must base their...

47 CFR 24.103 - Construction requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false Construction requirements. 24.103 Section 24... COMMUNICATIONS SERVICES Narrowband PCS § 24.103 Construction requirements. (a) Nationwide narrowband PCS... compliance with the construction requirements set forth in this section, licensees must base their...

47 CFR 24.103 - Construction requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Construction requirements. 24.103 Section 24... COMMUNICATIONS SERVICES Narrowband PCS § 24.103 Construction requirements. (a) Nationwide narrowband PCS... compliance with the construction requirements set forth in this section, licensees must base their...

47 CFR 24.103 - Construction requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false Construction requirements. 24.103 Section 24... COMMUNICATIONS SERVICES Narrowband PCS § 24.103 Construction requirements. (a) Nationwide narrowband PCS... compliance with the construction requirements set forth in this section, licensees must base their...

53. THRUST SECTION HEATER AND GASEOUS NITROGEN PURGE CONTROLS ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

53. THRUST SECTION HEATER AND GASEOUS NITROGEN PURGE CONTROLS ON EAST SIDE OF LAUNCH DECK. LAUNCHER IN BACKGROUND. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

3. PHOTOCOPY, ARCHITECTURAL AND STRUCTURAL PLAN, ELEVATIONS, AND SECTION DRAWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. PHOTOCOPY, ARCHITECTURAL AND STRUCTURAL PLAN, ELEVATIONS, AND SECTION DRAWING FOR WATER TREATMENT PUMPING AND STORAGE BUILDING. - NIKE Missile Base SL-40, Water Treatment & Storage Building, Southern portion of launch area, southeast of Ready Building, Hecker, Monroe County, IL

View north of building 16 section (left) and pipe coppersmith ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north of building 16 section (left) and pipe coppersmith shop (Haer no. Pa-387-T) (right). Jet Lowe, Haer staff photographer, summer 1995 - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

48 CFR 242.7203 - Review procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

....7203 Section 242.7203 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contractor Material...) of this section); and (B) Issues an audit report for incorporation into the MMAS report based on an...

76 FR 67500 - Postal Service Price Adjustment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... available data from the Bureau of Labor Statistics provides the Postal Service with inflation-based price... includes a brief introductory section, three enumerated parts, and three attachments. The Postal Service also submitted separate workpapers supporting the planned changes. The introductory section includes...

Analysis of the effectiveness of various cross-sections in large-span post-tensioned ceilings

NASA Astrophysics Data System (ADS)

Bednarz, K.

2018-03-01

The correct construction of large span, slim post-tensioned concrete slabs is conditioned by an appropriate cross-section selection. It is generally accepted that the thinnest slab can be constructed using the full cross-section as the largest compression stress storage. However, completely different cross-sections may help to overcome large spans. The paper presents the results of the computational analysis of several types of cross-sections (full, with internal relieving inserts and ribbed) in the application to a post-tensioned slab with a span of 15.0m. Based on the results presented, appropriate conclusions were drawn.

Layer coefficients for NHDOT pavement materials

NASA Astrophysics Data System (ADS)

Janoo, Vincent C.

1994-09-01

In 1992, the New Hampshire Department of Transportation (NHDOT) experimented with the use of reclaimed asphalt concrete as a base course material, identified by NHDOT as reclaimed stabilized base (RSB). The RSB and a control test section were placed on Interstate 93 between exits 18 and 19. The RSB test section was designed to the same structural number (SN) as the control. To evaluate the structural capacity of these test sections, the U.S. Army Cold Regions Research and Engineering Laboratory (CRREL) conducted deflection tests using a Dynatest 8000 falling weight deflectometer (FWD). Preliminary analysis of the results by NHDOT personnel showed higher deflection in the reclaimed asphalt concrete test sections. The explanation was that the layer coefficient used for the RSB layer in the design was probably incorrect. A total of 10 test sections constituting the base course materials used by NHDOT were built near Bow, New Hampshire. CRREL evaluated and estimated the layer coefficients of the base course materials. The test program was developed to characterize the material in more than one way. Tests were conducted with the heavy weight deflectometer (HWD), dynamic cone penetrometer (DCP) and the Clegg hammer. In situ California bearing ratio (CBR) tests were also conducted. The deflection from the HWD were used with the WESDEF back calculation program to determine the layer moduli. The moduli were than used with the AASHTO Design Guide to calculate the layer coefficients. The layer coefficients were also determined with the method proposed by Rohde. The CBR values from the Clegg hammer, in situ CBR and DCP tests were also used in the relationships in the HDM model to determine the layer coefficients.

Improving the output voltage waveform of an intense electron-beam accelerator based on helical type Blumlein pulse forming line

NASA Astrophysics Data System (ADS)

Cheng, Xin-Bing; Liu, Jin-Liang; Zhang, Hong-Bo; Feng, Jia-Huai; Qian, Bao-Liang

2010-07-01

The Blumlein pulse forming line (BPFL) consisting of an inner coaxial pulse forming line (PFL) and an outer coaxial PFL is widely used in the field of pulsed power, especially for intense electron-beam accelerators (IEBA). The output voltage waveform determines the quality and characteristics of the output beam current of the IEBA. Comparing with the conventional BPFL, an IEBA based on a helical type BPFL can increase the duration of the output voltage in the same geometrical volume. However, for the helical type BPFL, the voltage waveform on a matched load may be distorted which influences the electron-beam quality. In this paper, an IEBA based on helical type BPFL is studied theoretically. Based on telegrapher equations of the BPFL, a formula for the output voltage of IEBA is obtained when the transition section is taken into account, where the transition section is between the middle cylinder of BPFL and the load. From the theoretical analysis, it is found that the wave impedance and transit time of the transition section influence considerably the main pulse voltage waveform at the load, a step is formed in front of the main pulse, and a sharp spike is also formed at the end of the main pulse. In order to get a well-shaped square waveform at the load and to improve the electron-beam quality of such an accelerator, the wave impedance of the transition section should be equal to that of the inner PFL of helical type BPFL and the transit time of the transition section should be designed as short as possible. Experiments performed on an IEBA with the helical type BPFL show reasonable agreement with theoretical analysis.

Cold-Temperature Plastic Resin Embedding of Liver for DNA- and RNA-Based Genotyping

PubMed Central

Finkelstein, Sydney D.; Dhir, Rajiv; Rabinovitz, Mordechai; Bischeglia, Michelle; Swalsky, Patricia A.; DeFlavia, Petrina; Woods, Jeffrey; Bakker, Anke; Becich, Michael

1999-01-01

The standard practice of tissue fixation in 10% formalin followed by embedding in paraffin wax preserves cellular morphology at the expense of availability and quality of DNA and RNA. The negative effect on cellular constituents results from a combination of extensive cross-linking and strand scission of DNA, RNA, and proteins induced by formaldehyde as well as RNA loss secondary to ubiquitous RNase activity and negative effects of high temperature exposure during paraffin melting, microscopic section collection, and tissue adherence to glass slides. An effective strategy to correlate cellular phenotype with molecular genotype involves microdissection of tissue sections based on specific histopathological features followed by genotyping of minute representative samples for specific underlying molecular alterations. Currently, this approach is limited to short-length polymerase chain reaction amplification (<250 bp) of DNA, due to the negative effects of standard tissue fixation and processing. To overcome this obstacle and permit both cellular morphology and nucleic acid content to be preserved to the fullest extent, we instituted a system of cold-temperature plastic resin embedding based on the use of the water-miscible methyl methacrylate polymer known as Immunobed (Polysciences, Warminster, PA). The system is simple, easy to adapt to clinical practice, and cost-effective. Immunobed tissue sections demonstrate a cellular appearance equivalent or even superior to that of standard tissue sections. Moreover, thin sectioning (0.5–1.0 μm thickness) renders ultrastructural evaluation feasible on plastic-embedded blocks. Tissue microdissection is readily performed, yielding high levels of long DNA and RNA for genomic and transcription-based correlative molecular analysis. We recommend the use of Immunobed or similar products for use in molecular anatomical pathology. PMID:11272904

40 CFR 454.60 - Applicability; description of manufacture of rosin-based derivatives subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... manufacture of rosin-based derivatives subcategory. 454.60 Section 454.60 Protection of Environment... manufacture of rosin-based derivatives subcategory. The provisions of this subpart are applicable to discharges resulting from the manufacture of rosin-based derivatives. ...

49 CFR 173.183 - Nitrocellulose base film.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Nitrocellulose base film. 173.183 Section 173.183 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Nitrocellulose base film. Films, nitrocellulose base, must be packaged in packagings conforming to the...

49 CFR 173.183 - Nitrocellulose base film.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Nitrocellulose base film. 173.183 Section 173.183 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Nitrocellulose base film. Films, nitrocellulose base, must be packaged in packagings conforming to the...

49 CFR 173.183 - Nitrocellulose base film.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false Nitrocellulose base film. 173.183 Section 173.183 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Nitrocellulose base film. Films, nitrocellulose base, must be packaged in packagings conforming to the...

European evidence based consensus on the diagnosis and management of Crohn's disease: special situations

PubMed Central

Caprilli, R; Gassull, M A; Escher, J C; Moser, G; Munkholm, P; Forbes, A; Hommes, D W; Lochs, H; Angelucci, E; Cocco, A; Vucelic, B; Hildebrand, H; Kolacek, S; Riis, L; Lukas, M; de Franchis, R; Hamilton, M; Jantschek, G; Michetti, P; O'Morain, C; Anwar, M M; Freitas, J L; Mouzas, I A; Baert, F; Mitchell, R; Hawkey, C J

2006-01-01

This third section of the European Crohn's and Colitis Organisation (ECCO) Consensus on the management of Crohn's disease concerns postoperative recurrence, fistulating disease, paediatrics, pregnancy, psychosomatics, extraintestinal manifestations, and alternative therapy. The first section on definitions and diagnosis reports on the aims and methods of the consensus, as well as sections on diagnosis, pathology, and classification of Crohn's disease. The second section on current management addresses treatment of active disease, maintenance of medically induced remission, and surgery of Crohn's disease. PMID:16481630

A Fuzzy Approach of Study to Improve the Status of Middle Class Family

NASA Astrophysics Data System (ADS)

Ramkumar, C.; Chandrasekaran, A. D.; Siva, E. P.

2018-04-01

In this chapter, we use the notion of FCM and its properties given, which was introduced by Bark Kosko in the year 1986. Further, this method is more simple and effective one as it can analyze the data by connection matrices and directed graphs. This paper has three sections; first section is introductory of Super Fuzzy Cognitive Maps. The application of super fuzzy cognitive maps to this problem is given in section two. In section three of this paper gives the conclusions based on our study.

Medicaid program; home and community-based services. Health Care Financing Administration (HCFA), HHS. Final rule with comment period.

PubMed

2000-10-10

This final rule with comment period expands State flexibility in providing prevocational, educational, and supported employment services under the Medicaid home and community-based services waiver provisions currently found in section 1915(c) of the Social Security Act (the Act); and incorporates the self-implementing provisions of section 4743 of the Balanced Budget Act of 1997 that amends section 1915(c)(5) of the Act to delete the requirements that an individual have prior institutionalization in a nursing facility or intermediate care facility for the mentally retarded before becoming eligible for the expanded habilitation services. In addition, we are making a number of technical changes to update or correct the regulations.

New V and V Tools for Diagnostic Modeling Environment (DME)

NASA Technical Reports Server (NTRS)

Pecheur, Charles; Nelson, Stacy; Merriam, Marshall (Technical Monitor)

2002-01-01

The purpose of this report is to provide correctness and reliability criteria for verification and validation (V&V) of Second Generation Reusable Launch Vehicle (RLV) Diagnostic Modeling Environment, describe current NASA Ames Research Center tools for V&V of Model Based Reasoning systems, and discuss the applicability of Advanced V&V to DME. This report is divided into the following three sections: (1) correctness and reliability criteria; (2) tools for V&V of Model Based Reasoning; and (3) advanced V&V applicable to DME. The Executive Summary includes an overview of the main points from each section. Supporting details, diagrams, figures, and other information are included in subsequent sections. A glossary, acronym list, appendices, and references are included at the end of this report.

Bioinformatic tools for inferring functional information from plant microarray data: tools for the first steps.

PubMed

Page, Grier P; Coulibaly, Issa

2008-01-01

Microarrays are a very powerful tool for quantifying the amount of RNA in samples; however, their ability to query essentially every gene in a genome, which can number in the tens of thousands, presents analytical and interpretative problems. As a result, a variety of software and web-based tools have been developed to help with these issues. This article highlights and reviews some of the tools for the first steps in the analysis of a microarray study. We have tried for a balance between free and commercial systems. We have organized the tools by topics including image processing tools (Section 2), power analysis tools (Section 3), image analysis tools (Section 4), database tools (Section 5), databases of functional information (Section 6), annotation tools (Section 7), statistical and data mining tools (Section 8), and dissemination tools (Section 9).

Influence of movable test section elements configuration on its drag and flow field uniformity at transonic speeds

NASA Astrophysics Data System (ADS)

Glazkov, S. A.; Gorbushin, A. R.; Osipova, S. L.; Semenov, A. V.

2016-10-01

The report describes the results of flow field experimental research in TsAGI T-128 transonic wind tunnel. During the tests Mach number, stagnation pressure, test section wall perforation ratio, angles between the test section panels and mixing chamber flaps varied. Based on the test results one determined corrections to the free-stream Mach number related to the flow speed difference in the model location and in the zone of static pressure measurement on the test section walls, nonuniformity of the longitudinal velocity component in the model location, optimal position of the movable test section elements to provide flow field uniformity in the test section and minimize the test leg drag.

24 CFR 200.800 - Lead-based paint.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Lead-based paint. 200.800 Section... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based...

24 CFR 200.800 - Lead-based paint.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Lead-based paint. 200.800 Section... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based...

24 CFR 200.800 - Lead-based paint.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Lead-based paint. 200.800 Section... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based...

24 CFR 200.800 - Lead-based paint.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Lead-based paint. 200.800 Section... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based...

24 CFR 200.800 - Lead-based paint.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Lead-based paint. 200.800 Section... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based...

47 CFR 61.16 - Base documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for Electronic Filing § 61.16 Base documents. (a) The Base Document is a complete tariff which incorporates all effective revisions, as of the last day of the preceding month. The Base Document should be... 47 Telecommunication 3 2011-10-01 2011-10-01 false Base documents. 61.16 Section 61.16...

10 CFR 904.7 - Base charge.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Base charge. 904.7 Section 904.7 Energy DEPARTMENT OF... Marketing § 904.7 Base charge. (a) The Base Charge shall be developed by the Administrator and promulgated in accordance with appropriate DOE regulations. The Base Charge shall be composed of a capacity...

26 CFR 1.954-1 - Foreign base company income.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 10 2013-04-01 2013-04-01 false Foreign base company income. 1.954-1 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Controlled Foreign Corporations § 1.954-1 Foreign base company income... computing the foreign base company income of a controlled foreign corporation. Foreign base company income...

10 CFR 904.7 - Base charge.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Base charge. 904.7 Section 904.7 Energy DEPARTMENT OF... Marketing § 904.7 Base charge. (a) The Base Charge shall be developed by the Administrator and promulgated in accordance with appropriate DOE regulations. The Base Charge shall be composed of a capacity...

47 CFR 61.16 - Base documents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Base documents. 61.16 Section 61.16... for Electronic Filing § 61.16 Base documents. (a) The Base Document is a complete tariff which incorporates all effective revisions, as of the last day of the preceding month. The Base Document should be...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

26 CFR 1.954-1 - Foreign base company income.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 10 2011-04-01 2011-04-01 false Foreign base company income. 1.954-1 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Controlled Foreign Corporations § 1.954-1 Foreign base company income... computing the foreign base company income of a controlled foreign corporation. Foreign base company income...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

26 CFR 1.954-1 - Foreign base company income.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 10 2012-04-01 2012-04-01 false Foreign base company income. 1.954-1 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Controlled Foreign Corporations § 1.954-1 Foreign base company income... computing the foreign base company income of a controlled foreign corporation. Foreign base company income...

47 CFR 61.16 - Base documents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Base documents. 61.16 Section 61.16... for Electronic Filing § 61.16 Base documents. (a) The Base Document is a complete tariff which incorporates all effective revisions, as of the last day of the preceding month. The Base Document should be...

10 CFR 904.7 - Base charge.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Base charge. 904.7 Section 904.7 Energy DEPARTMENT OF... Marketing § 904.7 Base charge. (a) The Base Charge shall be developed by the Administrator and promulgated in accordance with appropriate DOE regulations. The Base Charge shall be composed of a capacity...

10 CFR 904.7 - Base charge.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Base charge. 904.7 Section 904.7 Energy DEPARTMENT OF... Marketing § 904.7 Base charge. (a) The Base Charge shall be developed by the Administrator and promulgated in accordance with appropriate DOE regulations. The Base Charge shall be composed of a capacity...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

47 CFR 61.16 - Base documents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Base documents. 61.16 Section 61.16... for Electronic Filing § 61.16 Base documents. (a) The Base Document is a complete tariff which incorporates all effective revisions, as of the last day of the preceding month. The Base Document should be...

40 CFR 125.3 - Technology-based treatment requirements in permits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Technology-based treatment... Criteria and Standards for Imposing Technology-Based Treatment Requirements Under Sections 301(b) and 402 of the Act § 125.3 Technology-based treatment requirements in permits. (a) General. Technology-based...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

Non-imaged based method for matching brains in a common anatomical space for cellular imagery.

PubMed

Midroit, Maëllie; Thevenet, Marc; Fournel, Arnaud; Sacquet, Joelle; Bensafi, Moustafa; Breton, Marine; Chalençon, Laura; Cavelius, Matthias; Didier, Anne; Mandairon, Nathalie

2018-04-22

Cellular imagery using histology sections is one of the most common techniques used in Neuroscience. However, this inescapable technique has severe limitations due to the need to delineate regions of interest on each brain, which is time consuming and variable across experimenters. We developed algorithms based on a vectors field elastic registration allowing fast, automatic realignment of experimental brain sections and associated labeling in a brain atlas with high accuracy and in a streamlined way. Thereby, brain areas of interest can be finely identified without outlining them and different experimental groups can be easily analyzed using conventional tools. This method directly readjusts labeling in the brain atlas without any intermediate manipulation of images. We mapped the expression of cFos, in the mouse brain (C57Bl/6J) after olfactory stimulation or a non-stimulated control condition and found an increased density of cFos-positive cells in the primary olfactory cortex but not in non-olfactory areas of the odor-stimulated animals compared to the controls. Existing methods of matching are based on image registration which often requires expensive material (two-photon tomography mapping or imaging with iDISCO) or are less accurate since they are based on mutual information contained in the images. Our new method is non-imaged based and relies only on the positions of detected labeling and the external contours of sections. We thus provide a new method that permits automated matching of histology sections of experimental brains with a brain reference atlas. Copyright © 2018 Elsevier B.V. All rights reserved.

[Computation of the cross-sectional area of the cable in the power circuit of the X-ray machine].

PubMed

Meng, Xin-min; Feng, Da-yu

2007-01-01

The source impedance of the power circuit in the x-ray machine is analyzed in the paper and based on the voltage drop generated by the impedance, the cross-sectional area of the cable is calculated. In the end, the cross-sectional areas of the cables, corresponding to their respective distances between the transformers and the switchboards are given.

Catalog of data bases and reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-01

This document provides information about the many reports and other materials made available by the US Department of Energy (DOE) Global Change Research Program (GCRP). It is divided into nine sections plus author and title indexes. The reports in Section A provide information about the scope, activities, and direction of the GCRP, Sections B, C, D, and E contain information about research that has been sponsored by GCRP, including those produced by CDIAC.

Cross-Sectional Analysis of Time-Dependent Data: Mean-Induced Association in Age-Heterogeneous Samples and an Alternative Method Based on Sequential Narrow Age-Cohort Samples

ERIC Educational Resources Information Center

Hofer, Scott M.; Flaherty, Brian P.; Hoffman, Lesa

2006-01-01

The effect of time-related mean differences on estimates of association in cross-sectional studies has not been widely recognized in developmental and aging research. Cross-sectional studies of samples varying in age have found moderate to high levels of shared age-related variance among diverse age-related measures. These findings may be…

Classification of Kiwifruit Grades Based on Fruit Shape Using a Single Camera

PubMed Central

Fu, Longsheng; Sun, Shipeng; Li, Rui; Wang, Shaojin

2016-01-01

This study aims to demonstrate the feasibility for classifying kiwifruit into shape grades by adding a single camera to current Chinese sorting lines equipped with weight sensors. Image processing methods are employed to calculate fruit length, maximum diameter of the equatorial section, and projected area. A stepwise multiple linear regression method is applied to select significant variables for predicting minimum diameter of the equatorial section and volume and to establish corresponding estimation models. Results show that length, maximum diameter of the equatorial section and weight are selected to predict the minimum diameter of the equatorial section, with the coefficient of determination of only 0.82 when compared to manual measurements. Weight and length are then selected to estimate the volume, which is in good agreement with the measured one with the coefficient of determination of 0.98. Fruit classification based on the estimated minimum diameter of the equatorial section achieves a low success rate of 84.6%, which is significantly improved using a linear combination of the length/maximum diameter of the equatorial section and projected area/length ratios, reaching 98.3%. Thus, it is possible for Chinese kiwifruit sorting lines to reach international standards of grading kiwifruit on fruit shape classification by adding a single camera. PMID:27376292

TRENCADIS - secure architecture to share and manage DICOM objects in a ontological framework based on OGSA.

PubMed

Blanquer, Ignacio; Hernandez, Vicente; Segrelles, Damià; Torres, Erik

2007-01-01

Today most European healthcare centers use the digital format for their databases of images. TRENCADIS is a software architecture comprising a set of services as a solution for interconnecting, managing and sharing selected parts of medical DICOM data for the development of training and decision support tools. The organization of the distributed information in virtual repositories is based on semantic criteria. Different groups of researchers could organize themselves to propose a Virtual Organization (VO). These VOs will be interested in specific target areas, and will share information concerning each area. Although the private part of the information to be shared will be removed, special considerations will be taken into account to avoid the access by non-authorized users. This paper describes the security model implemented as part of TRENCADIS. The paper is organized as follows. First introduces the problem and presents our motivations. Section 1 defines the objectives. Section 2 presents an overview of the existing proposals per objective. Section 3 outlines the overall architecture. Section 4 describes how TRENCADIS is architected to realize the security goals discussed in the previous sections. The different security services and components of the infrastructure are briefly explained, as well as the exposed interfaces. Finally, Section 5 concludes and gives some remarks on our future work.

Cross-shaped torsional spring

DOEpatents

Williamson, M.M.; Pratt, G.A.

1999-06-08

The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section. 30 figs.

Elastic actuator for precise force control

DOEpatents

Pratt, G.A.; Williamson, M.M.

1997-07-22

The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section. 30 figs.

Elastic actuator for precise force control

DOEpatents

Pratt, Gill A.; Williamson, Matthew M.

1997-07-22

The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section.

42 CFR 412.72 - Modification of base-year costs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 2 2012-10-01 2012-10-01 false Modification of base-year costs. 412.72 Section 412... Modification of base-year costs. (a) Bases for modification of base-year costs. Base-year costs as determined... before November 16, 1983 has until November 15, 1983 to request its intermediary to reestimate its base...

42 CFR 412.72 - Modification of base-year costs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 2 2013-10-01 2013-10-01 false Modification of base-year costs. 412.72 Section 412... Modification of base-year costs. (a) Bases for modification of base-year costs. Base-year costs as determined... before November 16, 1983 has until November 15, 1983 to request its intermediary to reestimate its base...

42 CFR 412.72 - Modification of base-year costs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 2 2011-10-01 2011-10-01 false Modification of base-year costs. 412.72 Section 412... Modification of base-year costs. (a) Bases for modification of base-year costs. Base-year costs as determined... before November 16, 1983 has until November 15, 1983 to request its intermediary to reestimate its base...

42 CFR 412.72 - Modification of base-year costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Modification of base-year costs. 412.72 Section 412... Modification of base-year costs. (a) Bases for modification of base-year costs. Base-year costs as determined... before November 16, 1983 has until November 15, 1983 to request its intermediary to reestimate its base...

The base of the Campanian: a magnetostratigraphic definition, integrated biostratigraphy and isotope stratigraphy

NASA Astrophysics Data System (ADS)

Wagreich, Michael; Dinarès-Turell, Jaume; Wolfgring, Erik; Omer Yilmaz, Ismail

2017-04-01

The base of the Campanian, the longest stage of the Late Cretaceous, is still not defined by a GSSP (Global Boundary Stratotype Section and Point). Furthermore, no consensus exists about the boundary criterion: macrofossils like ammonites and inoceramids suffer from bioprovincialism. The LAD of the crinoid Marsupites testudinarius was proposed as the primary fossil marker. But this marker is mainly a chalk facies fossil, which is rare to absent in pelagic low-latitudes, absent in oceanic sections, and the LAD may be influenced by palaeoenvironmental and palaecological settings. More recently, a boundary defined by magnetostratigraphy, i.e. the base of Chron C33r after the Long Cretaceous Normal Chron C34n, has been discussed. Western Tethyan pelagic sections from Austria and Turkey provide means for integrating various stratigraphic methods. A robust magnetostratigraphic signal was found at the Postalm section (Gosau Group, Northern Calcareous Alps, Austria) which may serve as a reference section for the northwestern Tethys. Including nearby complementary sections, palaeomagnetic data can be integrated with strontium isotope stratigraphy and stable isotope data, planktonic foraminifera and calcareous nannoplankton biostratigraphy, , and ammonite, crinoid and inoceramid data. The Postalm section shows a deepening trend from upper Santonian conglomerates and grey shelf marls to pelagic bathyal red marly limestones of Campanian age. Palaeomagnetic data allow identifying the top of Chron C34n and the following reversal in the lower part of the red marly limestones. A 1 m-thick interval of high magnetic susceptibility is present at the end of C34n. Two of the main suggested biomarkers to pinpoint the Santonian-Campanian boundary, i.e. the last occurrence of the planktonic foraminifer Dicarinella asymetrica and the first occurrence of the nannofossil Broinsonia parca parca, occur in close proximity to the reversal, which is suggested herein as the primary marker event for the base of the Campanian. Strontium isotope stratigraphy indicates a value of 0.707534. Both carbon and oxygen isotope values show a negative excursion just below the boundary. The positive Santonian-Campanian boundary carbon isotope event (SCBE) starts probably just at the boundary level. This interval is considered to correspond to a short sea-level high in the late Santonian followed by a lowstand at the Santonian-Campanian boundary. Macrofossil data from the nearby Schattau section indicate the late Santonian Paraplanum ammonite Subzone, the presence of the crinoid Marsupites laevigatus and inoceramids, e.g. Cordiceramus muelleri muelleri, below the boundary as defined by magnetostratigraphy. Sections from the western Tethyan Mudurnu-Göynük basin (NW Turkey) provide similar evidence for the Santonian-Campanian boundary interval. Near Göynük town, a reversal of the magnetic polarity was identified to represent the base of C33r within a pelagic section. Biostratigraphic data suggest an age from the late Santonian Dicarinella asymetrica to the early Campanian Globotruncanita elevata planktonic foraminifera zone, and nannofossil zones UC13-CC14. Results from the assessment of field magnetic susceptibility give evidence for Milankovitch cycles, presumably the 405 ka eccentricity cycle.