19 CFR 191.27 - Time limitations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Time limitations. 191.27 Section 191.27 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Manufacturing Drawback § 191.27 Time limitations. (a) Direct identification...

19 CFR 191.27 - Time limitations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Time limitations. 191.27 Section 191.27 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Manufacturing Drawback § 191.27 Time limitations. (a) Direct identification...

40 CFR 723.50 - Chemical substances manufactured in quantities of 10,000 kilograms or less per year, and chemical...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., or to a landfill unless the manufacturer has demonstrated to EPA's satisfaction in a notice under... manufactured under this section, notwithstanding satisfaction of the criterion of paragraphs (c)(1) or (c)(2... the manufacturer. (k) Customer notification. (1) Manufacturers of new chemical substances described in...

14 CFR 21.195 - Experimental certificates: Aircraft to be used for market surveys, sales demonstrations, and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... used for market surveys, sales demonstrations, and customer crew training. 21.195 Section 21.195... be used for market surveys, sales demonstrations, and customer crew training. (a) A manufacturer of... that is to be used for market surveys, sales demonstrations, or customer crew training. (b) A...

14 CFR 21.195 - Experimental certificates: Aircraft to be used for market surveys, sales demonstrations, and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... used for market surveys, sales demonstrations, and customer crew training. 21.195 Section 21.195... be used for market surveys, sales demonstrations, and customer crew training. (a) A manufacturer of... that is to be used for market surveys, sales demonstrations, or customer crew training. (b) A...

14 CFR 21.195 - Experimental certificates: Aircraft to be used for market surveys, sales demonstrations, and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... used for market surveys, sales demonstrations, and customer crew training. 21.195 Section 21.195... be used for market surveys, sales demonstrations, and customer crew training. (a) A manufacturer of... that is to be used for market surveys, sales demonstrations, or customer crew training. (b) A...

14 CFR 21.195 - Experimental certificates: Aircraft to be used for market surveys, sales demonstrations, and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... used for market surveys, sales demonstrations, and customer crew training. 21.195 Section 21.195... be used for market surveys, sales demonstrations, and customer crew training. (a) A manufacturer of... that is to be used for market surveys, sales demonstrations, or customer crew training. (b) A...

19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

Code of Federal Regulations, 2010 CFR

2010-04-01

... original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S... vehicles and articles for use as original equipment in the manufacture of automotive vehicles. (a)(1... his declaration that the articles are being imported for use as original equipment in the manufacture...

76 FR 9320 - Foreign-Trade Zone 274-Butte-Silver Bow, MT; Application for Manufacturing Authority REC Silicon...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

... Silicon to realize logistical benefits through the use of weekly customs entry procedures. Customs duties... Avenue, NW., Washington, DC 20230-0002, and in the ``Reading Room'' section of the Board's Web site...

19 CFR 191.7 - General manufacturing drawback ruling.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Section 191.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... production under § 191.2(q) of this subpart. (2) Computer-generated number. With the letter of acknowledgment the drawback office shall include the unique computer-generated number assigned to the acknowledgment...

19 CFR 191.7 - General manufacturing drawback ruling.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Section 191.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... production under § 191.2(q) of this subpart. (2) Computer-generated number. With the letter of acknowledgment the drawback office shall include the unique computer-generated number assigned to the acknowledgment...

19 CFR 191.7 - General manufacturing drawback ruling.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Section 191.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... production under § 191.2(q) of this subpart. (2) Computer-generated number. With the letter of acknowledgment the drawback office shall include the unique computer-generated number assigned to the acknowledgment...

19 CFR 10.177 - Cost or value of materials produced in the beneficiary developing country.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Wholly the growth, product, or manufacture of the beneficiary developing country; or (2) Substantially... beneficiary developing country. 10.177 Section 10.177 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... produced in the beneficiary developing country. (a) “Produced in the beneficiary developing country...

19 CFR 10.177 - Cost or value of materials produced in the beneficiary developing country.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Wholly the growth, product, or manufacture of the beneficiary developing country; or (2) Substantially... beneficiary developing country. 10.177 Section 10.177 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... produced in the beneficiary developing country. (a) “Produced in the beneficiary developing country...

19 CFR 146.52 - Manipulation, manufacture, exhibition or destruction; Customs Form 216.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Manipulation, manufacture, exhibition or... Merchandise in a Zone § 146.52 Manipulation, manufacture, exhibition or destruction; Customs Form 216. (a... application) on Customs Form 216 for permission to manipulate, manufacture, exhibit, or destroy merchandise in...

Product manufacturing, quality, and reliability initiatives to maintain a competitive advantage and meet customer expectations in the semiconductor industry

NASA Astrophysics Data System (ADS)

Capps, Gregory

Semiconductor products are manufactured and consumed across the world. The semiconductor industry is constantly striving to manufacture products with greater performance, improved efficiency, less energy consumption, smaller feature sizes, thinner gate oxides, and faster speeds. Customers have pushed towards zero defects and require a more reliable, higher quality product than ever before. Manufacturers are required to improve yields, reduce operating costs, and increase revenue to maintain a competitive advantage. Opportunities exist for integrated circuit (IC) customers and manufacturers to work together and independently to reduce costs, eliminate waste, reduce defects, reduce warranty returns, and improve quality. This project focuses on electrical over-stress (EOS) and re-test okay (RTOK), two top failure return mechanisms, which both make great defect reduction opportunities in customer-manufacturer relationship. Proactive continuous improvement initiatives and methodologies are addressed with emphasis on product life cycle, manufacturing processes, test, statistical process control (SPC), industry best practices, customer education, and customer-manufacturer interaction.

Consolidation of Customer Orders into Truckloads at a Large Manufacturer

DTIC Science & Technology

1997-08-01

Consolidation of Customer Orders into Truckloads at a Large Manufacturer G. G. Brown; D. Ronen The Journal of the Operational Research Society...AND SUBTITLE Consolidation of Customer Orders into Truckloads at a Large Manufacturer 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...All rights reserved. 0160-5682/97 $12.00 ~ Consolidation of customer orders into truckloads at a large manufacturer GG Brown1 and D Ronen2 1 Naval

77 FR 7281 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... Manufacturing Transformers H. Customer Subgroup Analysis I. Manufacturer Impact Analysis 1. Overview 2... Justification and Energy Savings 1. Economic Impacts on Customers a. Life-Cycle Cost and Payback Period b. Customer Subgroup Analysis c. Rebuttable-Presumption Payback 2. Economic Impact on Manufacturers a...

Employee customer orientation in manufacturing organizations: joint influences of customer proximity and the senior leadership team.

PubMed

Liao, Hui; Subramony, Mahesh

2008-03-01

Pursuing a customer-focused strategy in manufacturing organizations requires employees across functions to embrace the importance of understanding customer needs and to align their everyday efforts with the goal of satisfying and retaining customers. Little prior research has examined what factors influence employee customer orientation in manufacturing settings. Drawing on the attraction-selection-attrition model, upper-echelons theory, and contingency theories of leadership, this study investigated the joint influences of functional roles' proximity to external customers and the senior leadership team's customer orientation on employee customer orientation. Hierarchical linear modeling results based on data obtained from 4,299 employees and 403 senior leaders from 42 facilities of a global manufacturer operating in 16 countries revealed that employees occupying customer-contact roles had the highest level of customer orientation, followed by employees occupying production roles, and then by those in support roles. In addition, there was a positive relationship between the senior leadership team's customer orientation and employee customer orientation for all 3 functional roles. The positive relationship between the senior leadership team and employee customer orientation was the strongest for employees in support roles, suggesting that lower levels of proximity to external customers may create a greater need for leadership in developing employees' customer-oriented attitudes. Copyright 2008 APA

27 CFR 28.132 - Responsibility for return of wine.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of wine. 28.132 Section 28.132 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Withdrawal of Wine Without... Customs Bonded Warehouse, or Transportation to a Manufacturing Bonded Warehouse Return of Wines to Bonded...

19 CFR 122.25 - Exemption from special landing requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) and (c)(6) of this section: (1) Aircraft registration number(s) and manufacturer's serial number(s... other (foreign) registration number for the aircraft; (ii) Notify Customs of the sale, theft...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Private Aircraft § 122.25 Exemption from special landing...

19 CFR 122.25 - Exemption from special landing requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) and (c)(6) of this section: (1) Aircraft registration number(s) and manufacturer's serial number(s... other (foreign) registration number for the aircraft; (ii) Notify Customs of the sale, theft...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Private Aircraft § 122.25 Exemption from special landing...

19 CFR 122.25 - Exemption from special landing requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) and (c)(6) of this section: (1) Aircraft registration number(s) and manufacturer's serial number(s... other (foreign) registration number for the aircraft; (ii) Notify Customs of the sale, theft...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Private Aircraft § 122.25 Exemption from special landing...

Internet Business Solutions

NASA Technical Reports Server (NTRS)

1997-01-01

Cogent Software, Inc. was formed in January 1995 by David Atkinson and Irene Woerner, both former employees of the Jet Propulsion Laboratory (JPL). Several other Cogent employees also worked at JPL. Atkinson headed JPL's Information Systems Technology section and Woerner lead the Advanced User Interfaces Group. Cogent's mission is to help companies organize and manage their online content by developing advanced software for the next generation of online directories and information catalogs. The company offers a complete range of Internet solutions, including Internet access, Web site design, local and wide-area networks, and custom software for online commerce applications. Cogent also offers DesignSphere Online, an electronic community for the communications arts industry. Customers range from small offices to manufacturers with thousands of employees, including Chemi-Con, one of the largest manufacturers of capacitors in the world.

Embedded spacecraft thermal control using ultrasonic consolidation

NASA Astrophysics Data System (ADS)

Clements, Jared W.

Research has been completed in order to rapidly manufacture spacecraft thermal control technologies embedded in spacecraft structural panels using ultrasonic consolidation. This rapid manufacturing process enables custom thermal control designs in the time frame necessary for responsive space. Successfully embedded components include temperature sensors, heaters, wire harnessing, pre-manufactured heat pipes, and custom integral heat pipes. High conductivity inserts and custom integral pulsating heat pipes were unsuccessfully attempted. This research shows the viability of rapid manufacturing of spacecraft structures with embedded thermal control using ultrasonic consolidation.

78 FR 54796 - Research Expenditures

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

... the design of the product, or even redesign components of the product, after production of the product... is engaged in the manufacture and sale of custom machines. U contracts to design and produce a... design. See paragraph (a)(2) of this section (relating to production costs). Example 4. Assume the same...

Cross Sectional Study of Agile Software Development Methods and Project Performance

ERIC Educational Resources Information Center

Lambert, Tracy

2011-01-01

Agile software development methods, characterized by delivering customer value via incremental and iterative time-boxed development processes, have moved into the mainstream of the Information Technology (IT) industry. However, despite a growing body of research which suggests that a predictive manufacturing approach, with big up-front…

19 CFR 146.9 - Permission of operator.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TREASURY (CONTINUED) FOREIGN TRADE ZONES General Provisions § 146.9 Permission of operator. An application for permission to admit merchandise into a zone, or to manipulate, manufacture, exhibit, or destroy... 19 Customs Duties 2 2010-04-01 2010-04-01 false Permission of operator. 146.9 Section 146.9...

75 FR 9442 - Lonza, Inc., Riverside Plant, Lonza Exclusive Synthesis Section, Custom Manufacturing Division...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-02

... competitive with cGMP intermediates and Active Pharmaceutical Ingredients from the subject facility to a..., Conshohocken, Pennsylvania, who are engaged in employment related to the production of cGMP intermediates and...GMP intermediates and Active Pharmaceutical Ingredients, who became totally or partially separated...

An RFID-Based Manufacturing Control Framework for Loosely Coupled Distributed Manufacturing System Supporting Mass Customization

NASA Astrophysics Data System (ADS)

Chen, Ruey-Shun; Tsai, Yung-Shun; Tu, Arthur

In this study we propose a manufacturing control framework based on radio-frequency identification (RFID) technology and a distributed information system to construct a mass-customization production process in a loosely coupled shop-floor control environment. On the basis of this framework, we developed RFID middleware and an integrated information system for tracking and controlling the manufacturing process flow. A bicycle manufacturer was used to demonstrate the prototype system. The findings of this study were that the proposed framework can improve the visibility and traceability of the manufacturing process as well as enhance process quality control and real-time production pedigree access. Using this framework, an enterprise can easily integrate an RFID-based system into its manufacturing environment to facilitate mass customization and a just-in-time production model.

19 CFR 115.15 - Reports by road vehicle or container manufacturer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Administration § 115.15 Reports by road vehicle or container manufacturer... 19 Customs Duties 1 2011-04-01 2011-04-01 false Reports by road vehicle or container manufacturer...

19 CFR 115.15 - Reports by road vehicle or container manufacturer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Administration § 115.15 Reports by road vehicle or container manufacturer... 19 Customs Duties 1 2012-04-01 2012-04-01 false Reports by road vehicle or container manufacturer...

19 CFR 115.15 - Reports by road vehicle or container manufacturer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Administration § 115.15 Reports by road vehicle or container manufacturer... 19 Customs Duties 1 2013-04-01 2013-04-01 false Reports by road vehicle or container manufacturer...

19 CFR 115.15 - Reports by road vehicle or container manufacturer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Administration § 115.15 Reports by road vehicle or container manufacturer... 19 Customs Duties 1 2014-04-01 2014-04-01 false Reports by road vehicle or container manufacturer...

19 CFR 115.15 - Reports by road vehicle or container manufacturer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Administration § 115.15 Reports by road vehicle or container manufacturer... 19 Customs Duties 1 2010-04-01 2010-04-01 false Reports by road vehicle or container manufacturer...

26 CFR 1.927(a)-1T - Temporary regulations; definition of export property.

Code of Federal Regulations, 2010 CFR

2010-04-01

... as commission agent, to another FSC which is a member of the same controlled group (as defined in... customers generally would not constitute services and would be export property if the requirements of this... manufactured or produced, as defined in § 1.954-3(a)(4). For purposes of this section, however, in determining...

27 CFR 70.232 - Protection for commercial transactions financing agreements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... definitions of the terms “security interest” and “tax lien filing,” respectively. For purposes of this section... time when the lender or purchaser has actual notice or knowledge (as defined in § 70.144(a) of this... finances the accounts receivable of one of its customers, the manufacturer is considered to engage in such...

Custom hip prostheses by integrating CAD and casting technology

NASA Astrophysics Data System (ADS)

Silva, Pedro F.; Leal, Nuno; Neto, Rui J.; Lino, F. Jorge; Reis, Ana

2012-09-01

Total Hip Arthroplasty (THA) is a surgical intervention that is being achieving high rates of success, leaving room to research on long run durability, patient comfort and costs reduction. Even so, up to the present, little research has been done to improve the method of manufacturing customized prosthesis. The common customized prostheses are made by full machining. This document presents a different approach methodology which combines the study of medical images, through CAD (Computer Aided Design) software, SLadditive manufacturing, ceramic shell manufacture, precision foundry with Titanium alloys and Computer Aided Manufacturing (CAM). The goal is to achieve the best comfort for the patient, stress distribution and the maximum lifetime of the prosthesis produced by this integrated methodology. The way to achieve this desiderate is to make custom hip prosthesis which are adapted to each patient needs and natural physiognomy. Not only the process is reliable, but also represents a cost reduction comparing to the conventional full machined custom hip prosthesis.

Implementation of Section 255 of the Telecommunications Act of 1996: access to telecommunications services, telecommunications equipment, and customer premises equipment by persons with disabilities--FCC. Notice of proposed rulemaking.

PubMed

1998-05-22

This Notice of Proposed Rulemaking (NPRM) is an important step in the Commission's effort to increase the accessibility of telecommunications services and equipment to Americans with disabilities. The NPRM proposes a framework for implementing section 255 of the Communications Act of 1934 (Act), which requires telecommunications equipment manufacturers and service providers to ensure that their equipment and services are accessible to persons with disabilities, to the extent it is readily achievable to do so. In addition, if accessibility is not readily achievable, section 255 requires manufacturers and service providers to ensure compatibility with existing peripheral devices or specialized customer premises equipment commonly used by individuals with disabilities to achieve access, to the extent it is readily achievable to do so. The NPRM first explores the Commission's legal authority to establish rules implementing section 255. The NPRM then seeks comment on the interpretation of specific statutory terms that are relevant to the proceeding. Finally, the NPRM seeks comment on proposals to implement and enforce the requirement that telecommunications equipment and services be made accessible to the extent readily achievable. The actions proposed in the NPRM are needed to ensure that people with disabilities are not left behind in the telecommunications revolution and consequently isolated from contemporary life.

A 3D bioprinting exemplar of the consequences of the regulatory requirements on customized processes.

PubMed

Hourd, Paul; Medcalf, Nicholas; Segal, Joel; Williams, David J

2015-01-01

Computer-aided 3D printing approaches to the industrial production of customized 3D functional living constructs for restoration of tissue and organ function face significant regulatory challenges. Using the manufacture of a customized, 3D-bioprinted nasal implant as a well-informed but hypothetical exemplar, we examine how these products might be regulated. Existing EU and USA regulatory frameworks do not account for the differences between 3D printing and conventional manufacturing methods or the ability to create individual customized products using mechanized rather than craft approaches. Already subject to extensive regulatory control, issues related to control of the computer-aided design to manufacture process and the associated software system chain present additional scientific and regulatory challenges for manufacturers of these complex 3D-bioprinted advanced combination products.

Measurement framework for product service system performance of generator set distributors

NASA Astrophysics Data System (ADS)

Sofianti, Tanika D.

2017-11-01

Selling Generator Set (Genset) in B2B market, distributors assisted manufacturers to sell products. This is caused by the limited resources owned by the manufacturer for adding service elements. These service elements are needed to enhance the competitiveness of the generator sets. Some genset distributors often sell products together with supports to their customers. Industrial distributor develops services to meet the needs of the customer. Generator set distributors support machines and equipment produced by manufacturer. The services delivered by the distributors could enhance value obtained by the customers from the equipment. Services provided to customers in bidding process, ordering process of the equipment from the manufacturer, equipment delivery, installations, and the after sales stage. This paper promotes framework to measure Product Service System (PSS) of Generator Set distributors in delivering their products and services for the customers. The methodology of conducting this research is by adopting the perspective of the providers and customers and by taking into account the tangible and intangible products. This research leads to the idea of improvement of current Product Service System of a Genset distributor. This research needs further studies in more detailed measures and the implementation of measurement tools.

Method for matching customer and manufacturer positions for metal product parameters standardization

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadij; Danilova, Yulija

2018-04-01

Decision making is the main stage of regulation the relations between customer and manufacturer during the design the demands of norms in standards. It is necessary to match the positions of the negotiating sides in order to gain the consensus. In order to take into consideration the differences of customer and manufacturer estimation of the object under standardization process it is obvious to use special methods of analysis. It is proposed to establish relationships between product properties and its functions using functional-target analysis. The special feature of this type of functional analysis is the consideration of the research object functions and properties. It is shown on the example of hexagonal head crew the possibility to establish links between its functions and properties. Such approach allows obtaining a quantitative assessment of the closeness the positions of customer and manufacturer at decision making during the standard norms establishment.

19 CFR 7.1 - Puerto Rico; spirits and wines withdrawn from warehouse for shipment to; duty on foreign-grown...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Puerto Rico; spirits and wines withdrawn from... INSULAR POSSESSIONS AND GUANTANAMO BAY NAVAL STATION § 7.1 Puerto Rico; spirits and wines withdrawn from... bonded manufacturing warehouse for shipment in bond to Puerto Rico pursuant to section 311, Tariff Act of...

19 CFR 7.1 - Puerto Rico; spirits and wines withdrawn from warehouse for shipment to; duty on foreign-grown...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Puerto Rico; spirits and wines withdrawn from... INSULAR POSSESSIONS AND GUANTANAMO BAY NAVAL STATION § 7.1 Puerto Rico; spirits and wines withdrawn from... bonded manufacturing warehouse for shipment in bond to Puerto Rico pursuant to section 311, Tariff Act of...

19 CFR 7.1 - Puerto Rico; spirits and wines withdrawn from warehouse for shipment to; duty on foreign-grown...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Puerto Rico; spirits and wines withdrawn from... INSULAR POSSESSIONS AND GUANTANAMO BAY NAVAL STATION § 7.1 Puerto Rico; spirits and wines withdrawn from... bonded manufacturing warehouse for shipment in bond to Puerto Rico pursuant to section 311, Tariff Act of...

Rapid tooling method for soft customized removable oral appliances.

PubMed

Salmi, Mika; Tuomi, Jukka; Sirkkanen, Rauno; Ingman, Tuula; Mäkitie, Antti

2012-01-01

Traditionally oral appliances i.e. removable orthodontic appliances, bite splints and snoring / sleep apnea appliances are made with alginate impressions and wax registrations. Our aim was to describe the process of manufacturing customized oral appliances with a new technique i.e. rapid tooling method. The appliance should ideally be custom made to match the teeth. An orthodontic patient, scheduled for conventional orthodontic treatment, served as a study subject. After a precise clinical and radiographic examination, the approach was to digitize the patient's dental arches and then to correct them virtually by computer. Additive manufacturing was then used to fabricate a mould for a soft customized appliance. The mould was manufactured using stereolithography from Somos ProtoGen O-XT 18420 material. Casting material for the mould to obtain the final appliance was silicone. As a result we managed to create a customized soft orthodontic appliance. Also, the accuracy of the method was found to be adequate. Two versions of the described device were manufactured: one with small and one with moderate orthodontic force. The study person also gave information on the subjective patient adaptation aspects of the oral appliance.

[Evaluation of production and clinical working time of computer-aided design/computer-aided manufacturing (CAD/CAM) custom trays for complete denture].

PubMed

Wei, L; Chen, H; Zhou, Y S; Sun, Y C; Pan, S X

2017-02-18

To compare the technician fabrication time and clinical working time of custom trays fabricated using two different methods, the three-dimensional printing custom trays and the conventional custom trays, and to prove the feasibility of the computer-aided design/computer-aided manufacturing (CAD/CAM) custom trays in clinical use from the perspective of clinical time cost. Twenty edentulous patients were recruited into this study, which was prospective, single blind, randomized self-control clinical trials. Two custom trays were fabricated for each participant. One of the custom trays was fabricated using functional suitable denture (FSD) system through CAD/CAM process, and the other was manually fabricated using conventional methods. Then the final impressions were taken using both the custom trays, followed by utilizing the final impression to fabricate complete dentures respectively. The technician production time of the custom trays and the clinical working time of taking the final impression was recorded. The average time spent on fabricating the three-dimensional printing custom trays using FSD system and fabricating the conventional custom trays manually were (28.6±2.9) min and (31.1±5.7) min, respectively. The average time spent on making the final impression with the three-dimensional printing custom trays using FSD system and the conventional custom trays fabricated manually were (23.4±11.5) min and (25.4±13.0) min, respectively. There was significant difference in the technician fabrication time and the clinical working time between the three-dimensional printing custom trays using FSD system and the conventional custom trays fabricated manually (P<0.05). The average time spent on fabricating three-dimensional printing custom trays using FSD system and making the final impression with the trays are less than those of the conventional custom trays fabricated manually, which reveals that the FSD three-dimensional printing custom trays is less time-consuming both in the clinical and laboratory process than the conventional custom trays. In addition, when we manufacture custom trays by three-dimensional printing method, there is no need to pour preliminary cast after taking the primary impression, therefore, it can save the impression material and model material. As to completing denture restoration, manufacturing custom trays using FSD system is worth being popularized.

Advantages of utilizing DMD based rapid manufacturing systems in mass customization applications

NASA Astrophysics Data System (ADS)

El-Siblani, A.

2010-02-01

The Use of DMD based Rapid Manufacturing Systems has proven to be very advantageous in the production of highly accurate plastic based components for use in mass customization market such as hearing aids, and dental markets. The voxelization process currently afforded with the DLP technology eliminates any layering effect associated with all existing additive Rapid Manufacturing technologies. The smooth accurate surfaces produced in an additive process utilizing DLP technology, through the voxelization approach, allow for the production of custom finished products. The implementation of DLP technology in rapid prototyping and rapid manufacturing systems allow for the usage of highly viscous photopolymer based liquid and paste composites for rapid manufacturing that could not be used in any other additive process prior to implementation of DLP technology in RP and RM systems. It also allowed for the greater throughput in production without sacrificing quality and accuracy.

Customer relationship management in the contract pharmaceutical industry: an exploratory study for measuring success.

PubMed

Kros, John F; Nadler, Scott; Molis, Justin

2007-01-01

Managing customer relationships is a very important issue in business-to-business markets. This research investigates the growing number of available resources defining Customer Relationship Management (CRM) efforts, and how they are being applied within the Contract Pharmaceutical Manufacturing industry. Exploratory study results using face-to-face and telephone questionnaires based on four criteria for rating a company's CRM efforts are presented. Data was collected from large Contract Pharmaceutical Manufacturing companies in the US market. The results and conclusions are discussed relating how the Contract Pharmaceutical Manufacturing industry is implementing CRM including some potential steps to take when considering a CRM initiative.

Converting customer expectations into achievable results.

PubMed

Landis, G A

1999-11-01

It is not enough in today's environment to just meet customers' expectations--we must exceed them. Therefore, one must learn what constitutes expectations. These needs have expanded during the past few years from just manufacturing the product and looking at the outcome from a provincial standpoint. Now we must understand and satisfy the entire supply chain. To manage this process and satisfy the customer, the process now involves the supplier, the manufacturer, and the entire distribution system.

Diverse task scheduling for individualized requirements in cloud manufacturing

NASA Astrophysics Data System (ADS)

Zhou, Longfei; Zhang, Lin; Zhao, Chun; Laili, Yuanjun; Xu, Lida

2018-03-01

Cloud manufacturing (CMfg) has emerged as a new manufacturing paradigm that provides ubiquitous, on-demand manufacturing services to customers through network and CMfg platforms. In CMfg system, task scheduling as an important means of finding suitable services for specific manufacturing tasks plays a key role in enhancing the system performance. Customers' requirements in CMfg are highly individualized, which leads to diverse manufacturing tasks in terms of execution flows and users' preferences. We focus on diverse manufacturing tasks and aim to address their scheduling issue in CMfg. First of all, a mathematical model of task scheduling is built based on analysis of the scheduling process in CMfg. To solve this scheduling problem, we propose a scheduling method aiming for diverse tasks, which enables each service demander to obtain desired manufacturing services. The candidate service sets are generated according to subtask directed graphs. An improved genetic algorithm is applied to searching for optimal task scheduling solutions. The effectiveness of the scheduling method proposed is verified by a case study with individualized customers' requirements. The results indicate that the proposed task scheduling method is able to achieve better performance than some usual algorithms such as simulated annealing and pattern search.

Preliminary fabrication and characterization of electron beam melted Ti-6Al-4V customized dental implant.

PubMed

Ramakrishnaiah, Ravikumar; Al Kheraif, Abdulaziz Abdullah; Mohammad, Ashfaq; Divakar, Darshan Devang; Kotha, Sunil Babu; Celur, Sree Lalita; Hashem, Mohamed I; Vallittu, Pekka K; Rehman, Ihtesham Ur

2017-05-01

The current study was aimed to fabricate customized root form dental implant using additive manufacturing technique for the replacement of missing teeth. The root form dental implant was designed using Geomagic™ and Magics™, the designed implant was directly manufactured by layering technique using ARCAM A2™ electron beam melting system by employing medical grade Ti-6Al-4V alloy powder. Furthermore, the fabricated implant was characterized in terms of certain clinically important parameters such as surface microstructure, surface topography, chemical purity and internal porosity. Results confirmed that, fabrication of customized dental implants using additive rapid manufacturing technology offers an attractive method to produce extremely pure form of customized titanium dental implants, the rough and porous surface texture obtained is expected to provide better initial implant stabilization and superior osseointegration.

19 CFR 115.41 - Certificate of approval for containers approved after manufacture.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115... 19 Customs Duties 1 2011-04-01 2011-04-01 false Certificate of approval for containers approved...

19 CFR 115.41 - Certificate of approval for containers approved after manufacture.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115... 19 Customs Duties 1 2010-04-01 2010-04-01 false Certificate of approval for containers approved...

19 CFR 115.41 - Certificate of approval for containers approved after manufacture.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115... 19 Customs Duties 1 2012-04-01 2012-04-01 false Certificate of approval for containers approved...

19 CFR 115.41 - Certificate of approval for containers approved after manufacture.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115... 19 Customs Duties 1 2014-04-01 2014-04-01 false Certificate of approval for containers approved...

19 CFR 115.41 - Certificate of approval for containers approved after manufacture.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115... 19 Customs Duties 1 2013-04-01 2013-04-01 false Certificate of approval for containers approved...

Mechanical strength of welding zones produced by material extrusion additive manufacturing.

PubMed

Davis, Chelsea S; Hillgartner, Kaitlyn E; Han, Seung Hoon; Seppala, Jonathan E

2017-08-01

As more manufacturing processes and research institutions adopt customized manufacturing as a key element in their design strategies and finished products, the resulting mechanical properties of parts produced through additive manufacturing (AM) must be characterized and understood. In material extrusion (MatEx), the most recently extruded polymer filament must bond to the previously extruded filament via polymer diffusion to form a "weld". The strength of the weld limits the performance of the manufactured part and is controlled through processing conditions. Under-standing the role of processing conditions, specifically extruder velocity and extruder temperature, on the overall strength of the weld will allow optimization of MatEx-AM parts. Here, the fracture toughness of a single weld is determined through a facile "trouser tear" Mode III fracture experiment. The actual weld thickness is observed directly by optical microscopy characterization of cross sections of MatEx-AM samples. Representative data of weld strength as a function of printing parameters on a commercial 3D printer demonstrates the robustness of the method.

Utility of Big Area Additive Manufacturing (BAAM) For The Rapid Manufacture of Customized Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Love, Lonnie J.

This Oak Ridge National Laboratory (ORNL) Manufacturing Development Facility (MDF) technical collaboration project was conducted in two phases as a CRADA with Local Motors Inc. Phase 1 was previously reported as Advanced Manufacturing of Complex Cyber Mechanical Devices through Community Engagement and Micro-manufacturing and demonstrated the integration of components onto a prototype body part for a vehicle. Phase 2 was reported as Utility of Big Area Additive Manufacturing (BAAM) for the Rapid Manufacture of Customized Electric Vehicles and demonstrated the high profile live printing of an all-electric vehicle using ONRL s Big Area Additive Manufacturing (BAAM) technology. This demonstration generatedmore » considerable national attention and successfully demonstrated the capabilities of the BAAM system as developed by ORNL and Cincinnati, Inc. and the feasibility of additive manufacturing of a full scale electric vehicle as envisioned by the CRADA partner Local Motors, Inc.« less

Measurement and Development of Humanware and Technoware Competencies in Order to Meet Pintle Chain Product Requirements in Bandung Manufacture Polytechnic

NASA Astrophysics Data System (ADS)

Akbar, Jodi; Akbar, Muhammad; Irianto, Dradjad

2016-02-01

Politeknik Manufaktur Bandung (Bandung Manufacture Polytechnic) is a polytechnic education that is not only to educate their students, but also manufactures order from customers at its teaching factory. This polytechnic is usually not responsive with the number of reject due to amateur operators from newcomer students. However, customers will be displeased if the reject rate is too high which can cause delay of delivery. At the foundry section, pintle chain is a product that has the highest amount of quantity but the lowest product standard fulfilment. Realizing this problem, it is a strong need to give more focus on quality improvement. The polytechnic considers that bad quality is not only related to low level of humanware (operator) but also related to low level of technoware (machine and equipment). In this research, QFD model was used as a tool for identifying target of improvement of non conforming factors of humanware and technoware using UNESCAP's technometric model. An improvement was done by implementing new scheduling strategy at foundry unit in order to minimize waiting time from molding to pouring process because of deterioration problem. This strategy provides an opportunity to reduce completion times about 50% and waiting time about 95% compared to the existing scheduling strategy.

Customer Education: The Silent Revolution.

ERIC Educational Resources Information Center

Zemke, Ron

1985-01-01

Discusses the marketing value and strategic necessity of planned and promoted customer education. The article examines customer training by the manufacturer as a definite trend in the microcomputer industry. Elements of a good customer training program are described along with suggestions for starting such a program. (CT)

The future of automation for high-volume wafer fabrication and ASIC manufacturing

NASA Astrophysics Data System (ADS)

Hughes, Randall A.; Shott, John D.

1986-12-01

A framework is given to analyze the future trends in semiconductor manufacturing automation systems, focusing specifically on the needs of ASIC (application-specific integrated circuit) or custom integrated circuit manufacturing. Advances in technologies such as gate arrays and standard cells now make it significantly easier to obtain system cost and performance advantages by integrating nonstandard functions on silicon. ASICs are attractive to U.S. manufacturers because they place a premium on sophisticated design tools, familiarity with customer needs and applications, and fast turn-around fabrication. These are areas where U.S. manufacturers believe they have an advantage and, consequently, will not suffer from the severe price/manufacturing competition encountered in conventional high-volume semiconductor products. Previously, automation was often considered viable only for high-volume manufacturing, but automation becomes a necessity in the new ASIC environment.

Technology: Making the Connections. Innovations in the Apparel Industry. Resources in Technology.

ERIC Educational Resources Information Center

Threlfall, K. Denise

1996-01-01

Describes the partnership between Levi Strauss & Co., the largest brand-name apparel manufacturer in the world, and Custom Clothing Technology, the developer of software to customize jeans for female customers. (JOW)

Setting new standards in MEMS

NASA Astrophysics Data System (ADS)

Rimskog, Magnus; O'Loughlin, Brian J.

2007-02-01

Silex Microsystems handles a wide range of customized MEMS components. This speech will be describing Silex's MEMS foundry work model for providing customized solutions based on MEMS in a cost effective and well controlled manner. Factors for success are the capabilities to reformulate a customer product concept to manufacturing processes in the wafer fab, using standard process modules and production equipment. A well-controlled system increases the likelihood of a first batch success and enables fast ramp-up into volume production. The following success factors can be listed: strong enduring relationships with the customers; highly qualified well-experienced specialists working close with the customer; process solutions and building blocks ready to use out of a library; addressing manufacturing issues in the early design phase; in-house know how to meet demands for volume manufacturing; access to a wafer fab with high capacity, good organization, high availability of equipment, and short lead times; process development done in the manufacturing environment using production equipment for easy ramp-up to volume production. The article covers a method of working to address these factors: to have a long and enduring relationships with customers utilizing MEMS expertise and working close with customers, to translate their product ideas to MEMS components; to have stable process solutions for features such as Low ohmic vias, Spiked electrodes, Cantilevers, Silicon optical mirrors, Micro needles, etc, which can be used and modified for the customer needs; to use a structured development and design methodology in order to handle hundreds of process modules, and setting up standard run sheets. It is also very important to do real time process development in the manufacturing line. It minimizes the lead-time for the ramp-up of production; to have access to a state of the art Wafer Fab which is well organized, controlled and flexible, with high capacity and short lead-time for prototypes. It is crucial to have intimate control of processes, equipment, organization, production flow control and WIP. This has been addressed by using a fully computerized control and reporting system.

Teaching Customer-Centric Operations Management--Evidence from an Experiential Learning-Oriented Mass Customisation Class

ERIC Educational Resources Information Center

Medini, Khaled

2018-01-01

The increase of individualised customer demands and tough competition in the manufacturing sector gave rise to more customer-centric operations management such as products and services (mass) customisation. Mass customisation (MC), which inherits the "economy of scale" from mass production (MP), aims to meet specific customer demands…

Employment Opportunities for the Handicapped in Programmable Automation.

ERIC Educational Resources Information Center

Swift, Richard; Leneway, Robert

A Computer Integrated Manufacturing System may make it possible for severely disabled people to custom design, machine, and manufacture either wood or metal parts. Programmable automation merges computer aided design, computer aided manufacturing, computer aided engineering, and computer integrated manufacturing systems with automated production…

New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

PubMed

Lee, M-Y; Chang, C-C; Ku, Y C

2008-01-01

Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.

An Analysis Of Additive Manufacturing Production Problems And Solutions

DTIC Science & Technology

2016-12-01

democratization of manufacturing (Hornick, 2015). AM has three distinct advantages over subtractive manufacturing : product customization, design flexibility...58 develops software and other technology solutions for the design , analysis, testing, manufacture , and validation of products (Diane Ryan, personal...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT AN ANALYSIS OF ADDITIVE MANUFACTURING PRODUCTION

Additive Manufacturing of Silicon Carbide-Based Ceramic Matrix Composites: Technical Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Singh, Mrityunjay; Halbig, Michael C.; Grady, Joseph E.

2016-01-01

Advanced SiC-based ceramic matrix composites offer significant contributions toward reducing fuel burn and emissions by enabling high overall pressure ratio (OPR) of gas turbine engines and reducing or eliminating cooling air in the hot-section components, such as shrouds, combustor liners, vanes, and blades. Additive manufacturing (AM), which allows high value, custom designed parts layer by layer, has been demonstrated for metals and polymer matrix composites. However, there has been limited activity on additive manufacturing of ceramic matrix composites (CMCs). In this presentation, laminated object manufacturing (LOM), binder jet process, and 3-D printing approaches for developing ceramic composite materials are presented. For the laminated object manufacturing (LOM), fiber prepreg laminates were cut into shape with a laser and stacked to form the desired part followed by high temperature heat treatments. For the binder jet, processing optimization was pursued through silicon carbide powder blending, infiltration with and without SiC nano powder loading, and integration of fibers into the powder bed. Scanning electron microscopy was conducted along with XRD, TGA, and mechanical testing. Various technical challenges and opportunities for additive manufacturing of ceramics and CMCs will be presented.

76 FR 35026 - Weather Shield Manufacturing, Inc. Corporate Office, Medford, WI; Notice of Amended Negative...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

... subject firm's major declining customers regarding their purchases of doors and/or windows in the relevant period. AAR 29-48. The survey revealed that customer imports of articles like or directly competitive... customer list or any list of the customers to whom Labor issued questionnaires.'') The materials to which...

Three-dimensional body scanning system for apparel mass-customization

NASA Astrophysics Data System (ADS)

Xu, Bugao; Huang, Yaxiong; Yu, Weiping; Chen, Tong

2002-07-01

Mass customization is a new manufacturing trend in which mass-market products (e.g., apparel) are quickly modified one at a time based on customers' needs. It is an effective competing strategy for maximizing customers' satisfaction and minimizing inventory costs. An automatic body measurement system is essential for apparel mass customization. This paper introduces the development of a body scanning system, body size extraction methods, and body modeling algorithms. The scanning system utilizes the multiline triangulation technique to rapidly acquire surface data on a body, and provides accurate body measurements, many of which are not available with conventional methods. Cubic B-spline curves are used to connect and smooth body curves. From the scanned data, a body form can be constructed using linear Coons surfaces. The body form can be used as a digital model of the body for 3-D garment design and for virtual try-on of a designed garment. This scanning system and its application software enable apparel manufacturers to provide custom design services to consumers seeking personal-fit garments.

AutoMOPS--B2B and B2C in mask making: mask manufacturing performance and customer satisfaction improvement through better information flow management

NASA Astrophysics Data System (ADS)

de Ridder, Luc; Filies, Olaf; Rodriguez, Ben; Kuijken, Aart

2001-04-01

Through application of modern supply chain concepts in combination with state-of-the-art information technology, mask manufacturing performance and customer satisfaction can be improved radically. The AutoMOPS solution emphasizes on the elimination of the order verification through paperless, electronically linked information sharing/exchange between chip design, mask production and prototype production stages.

Customer demand prediction of service-oriented manufacturing using the least square support vector machine optimized by particle swarm optimization algorithm

NASA Astrophysics Data System (ADS)

Cao, Jin; Jiang, Zhibin; Wang, Kangzhou

2017-07-01

Many nonlinear customer satisfaction-related factors significantly influence the future customer demand for service-oriented manufacturing (SOM). To address this issue and enhance the prediction accuracy, this article develops a novel customer demand prediction approach for SOM. The approach combines the phase space reconstruction (PSR) technique with the optimized least square support vector machine (LSSVM). First, the prediction sample space is reconstructed by the PSR to enrich the time-series dynamics of the limited data sample. Then, the generalization and learning ability of the LSSVM are improved by the hybrid polynomial and radial basis function kernel. Finally, the key parameters of the LSSVM are optimized by the particle swarm optimization algorithm. In a real case study, the customer demand prediction of an air conditioner compressor is implemented. Furthermore, the effectiveness and validity of the proposed approach are demonstrated by comparison with other classical predication approaches.

Assessment of a virtual functional prototyping process for the rapid manufacture of passive-dynamic ankle-foot orthoses.

PubMed

Schrank, Elisa S; Hitch, Lester; Wallace, Kevin; Moore, Richard; Stanhope, Steven J

2013-10-01

Passive-dynamic ankle-foot orthosis (PD-AFO) bending stiffness is a key functional characteristic for achieving enhanced gait function. However, current orthosis customization methods inhibit objective premanufacture tuning of the PD-AFO bending stiffness, making optimization of orthosis function challenging. We have developed a novel virtual functional prototyping (VFP) process, which harnesses the strengths of computer aided design (CAD) model parameterization and finite element analysis, to quantitatively tune and predict the functional characteristics of a PD-AFO, which is rapidly manufactured via fused deposition modeling (FDM). The purpose of this study was to assess the VFP process for PD-AFO bending stiffness. A PD-AFO CAD model was customized for a healthy subject and tuned to four bending stiffness values via VFP. Two sets of each tuned model were fabricated via FDM using medical-grade polycarbonate (PC-ISO). Dimensional accuracy of the fabricated orthoses was excellent (average 0.51 ± 0.39 mm). Manufacturing precision ranged from 0.0 to 0.74 Nm/deg (average 0.30 ± 0.36 Nm/deg). Bending stiffness prediction accuracy was within 1 Nm/deg using the manufacturer provided PC-ISO elastic modulus (average 0.48 ± 0.35 Nm/deg). Using an experimentally derived PC-ISO elastic modulus improved the optimized bending stiffness prediction accuracy (average 0.29 ± 0.57 Nm/deg). Robustness of the derived modulus was tested by carrying out the VFP process for a disparate subject, tuning the PD-AFO model to five bending stiffness values. For this disparate subject, bending stiffness prediction accuracy was strong (average 0.20 ± 0.14 Nm/deg). Overall, the VFP process had excellent dimensional accuracy, good manufacturing precision, and strong prediction accuracy with the derived modulus. Implementing VFP as part of our PD-AFO customization and manufacturing framework, which also includes fit customization, provides a novel and powerful method to predictably tune and precisely manufacture orthoses with objectively customized fit and functional characteristics.

15 CFR 400.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... different name, character, and use. (h) Port Director is normally the director of Customs for the Customs... activity, means any activity involving a change in condition of merchandise, other than manufacturing, which results in a change in the Customs classification of an article or in its eligibility for entry...

15 CFR 400.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... different name, character, and use. (h) Port Director is normally the director of Customs for the Customs... activity, means any activity involving a change in condition of merchandise, other than manufacturing, which results in a change in the Customs classification of an article or in its eligibility for entry...

Agile manufacturing: The factory of the future

NASA Technical Reports Server (NTRS)

Loibl, Joseph M.; Bossieux, Terry A.

1994-01-01

The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

3D modeling, custom implants and its future perspectives in craniofacial surgery

PubMed Central

Parthasarathy, Jayanthi

2014-01-01

Custom implants for the reconstruction of craniofacial defects have gained importance due to better performance over their generic counterparts. This is due to the precise adaptation to the region of implantation, reduced surgical times and better cosmesis. Application of 3D modeling in craniofacial surgery is changing the way surgeons are planning surgeries and graphic designers are designing custom implants. Advances in manufacturing processes and ushering of additive manufacturing for direct production of implants has eliminated the constraints of shape, size and internal structure and mechanical properties making it possible for the fabrication of implants that conform to the physical and mechanical requirements of the region of implantation. This article will review recent trends in 3D modeling and custom implants in craniofacial reconstruction. PMID:24987592

Application of FDM three-dimensional printing technology in the digital manufacture of custom edentulous mandible trays

PubMed Central

Chen, Hu; Yang, Xu; Chen, Litong; Wang, Yong; Sun, Yuchun

2016-01-01

The objective was to establish and evaluate a method for manufacture of custom trays for edentulous jaws using computer aided design and fused deposition modeling (FDM) technologies. A digital method for design the custom trays for edentulous jaws was established. The tissue surface data of ten standard mandibular edentulous plaster models, which was used to design the digital custom tray in a reverse engineering software, were obtained using a 3D scanner. The designed tray was printed by a 3D FDM printing device. Another ten hand-made custom trays were produced as control. The 3-dimentional surface data of models and custom trays was scanned to evaluate the accuracy of reserved impression space, while the difference between digitally made trays and hand-made trays were analyzed. The digitally made custom trays achieved a good matching with the mandibular model, showing higher accuracy than the hand-made ones. There was no significant difference of the reserved space between different models and its matched digitally made trays. With 3D scanning, CAD and FDM technology, an efficient method of custom tray production was established, which achieved a high reproducibility and accuracy. PMID:26763620

Toward Mass Customization in the Age of Information: The Case for Open Engineering Systems

NASA Technical Reports Server (NTRS)

Simpson, Timothy W.; Lautenschlager, Uwe; Mistree, Farrokh

1997-01-01

In the Industrial Era, manufacturers used "dedicated" engineering systems to mass produce their products. In today's increasingly competitive markets, the trend is toward mass customization, something that becomes increasingly feasible when modern information technologies are used to create open engineering systems. Our focus is on how designers can provide enhanced product flexibility and variety (if not fully customized products) through the development of open engineering systems. After presenting several industrial examples, we anchor our new systems philosophy with two real engineering applications. We believe that manufacturers who adopt open systems will achieve competitive advantage in the Information Age.

Producing Hybrid Metal Composites by Combining Additive Manufacturing and Casting

DOE PAGES

Pawlowski, Alex E.; Splitter, Derek A.; Muth, Thomas R.; ...

2017-10-01

Additive manufacturing by itself provides many benefits, but by combining different materials processing techniques like traditional casting with additive manufacturing to create hybrid processes, custom materials can be tailor-made and mass produced for applications with specific performance needs.

Precision engineering for future propulsion and power systems: a perspective from Rolls-Royce.

PubMed

Beale, Sam

2012-08-28

Rolls-Royce today is an increasingly global business, supplying integrated power systems to a wide variety of customers for use on land, at sea and in the air. Its reputation for 'delivering excellence' to these customers has been built largely on its gas turbine technology portfolio, and this reputation relies on the quality of the company's expertise in design, manufacture and delivery of services. This paper sets out to examine a number of examples, such as the high-pressure turbine blade, of the company's reliance on precision design and manufacture, highlighting how this precision contributes to customer satisfaction with its products. A number of measures the company is taking to accelerate its competitiveness in precision manufacture are highlighted, not least its extensive relationships with the academic research base. The paper finishes by looking briefly at the demands of the company's potential future product portfolio.

Student Satisfaction and the Customer Focus in Higher Education

ERIC Educational Resources Information Center

Mark, Eddie

2013-01-01

Advocating a customer focus, the Total Quality Management model of leadership has led to success in raising performance levels throughout various manufacturing and service industries. Many education stakeholders, however, are resistant to the notion that postsecondary students benefit from being treated like customers. While many critics oppose…

Lightweight custom composite prosthetic components using an additive manufacturing-based molding technique.

PubMed

Leddy, Michael T; Belter, Joseph T; Gemmell, Kevin D; Dollar, Aaron M

2015-01-01

Additive manufacturing techniques are becoming more prominent and cost-effective as 3D printing becomes higher quality and more inexpensive. The idea of 3D printed prosthetics components promises affordable, customizable devices, but these systems currently have major shortcomings in durability and function. In this paper, we propose a fabrication method for custom composite prostheses utilizing additive manufacturing, allowing for customizability, as well the durability of professional prosthetics. The manufacturing process is completed using 3D printed molds in a multi-stage molding system, which creates a custom finger or palm with a lightweight epoxy foam core, a durable composite outer shell, and soft urethane gripping surfaces. The composite material was compared to 3D printed and aluminum materials using a three-point bending test to compare stiffness, as well as gravimetric measurements to compare weight. The composite finger demonstrates the largest stiffness with the lowest weight compared to other tested fingers, as well as having customizability and lower cost, proving to potentially be a substantial benefit to the development of upper-limb prostheses.

75 FR 34426 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-17

... The company designs and manufactures Company. City, MO 64108. custom tents and awnings. A. Rifkin... Engineering & 750 Broad Street, 5/17/2010 Electro Chemical manufactures steel tanks Manufacturing. Emmaus, PA.... TLX Technologies, LLC......... Saratoga Drive, 5/17/2010 The firm designs and manufactures Waukesha...

Challenges in Teaching Modern Manufacturing Technologies

ERIC Educational Resources Information Center

Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

2015-01-01

Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in…

Feasibility study of custom manufacturing methods of ionic polymer-metal composite sensors

NASA Astrophysics Data System (ADS)

Nelson, Shelby E.

The ability to create an ion exchange membrane with any shape or thickness through custom manufacturing techniques is highly desirable in ionic polymer-metal composite (IPMC) research. This is caused by the poor selection and limited availability of certain thicknesses of commercial ion exchange membranes. The objective of this study is to determine the feasibility of manufacturing custom ion exchange membranes for IPMC sensors. The manufacturing methods used in this study are extrusion, injection molding, and hot pressing. A commercial membrane from Golden Energy Fuel Cells (GEFC) is used as a comparison. After the membranes are fabricated, certain properties of the membranes are tested throughout each processing stage to determine if they are suitable to be developed into IPMCs. The three processing stages are pre-activation, activation (hydrated and dehydrated), and IPMC. It was observed that the stiffness of the membranes increased from pre-activation to activation and decreased from activation to IPMC. A more flexible membrane in an IPMC allows for larger cation displacement within the membrane. The extruded and injection molded membranes showed the most potential with having the lowest stiffness of all the samples; however, they were not able to be made into IPMCs due to repeated membrane failures in the primary plating process. Gas accumulated between the layers that formed in the membranes due to the extrusion and injection molding cooling process during manufacturing. The hot pressed membrane was the only custom manufactured membrane to be fully processed into an IPMC. The hot pressed and GEFC IPMC sensors were operated at 1 Hz, 5 Hz, and 10 Hz frequencies with the GEFC IPMC producing the strongest output voltage signal. While the extruded and injection molded membranes showed potential to become IPMCs with their high water uptake percentage, high ion exchange capacity, and low stiffness, more development is needed within the manufacturing process to make a uniform sample that does not fail during chemical processing.

Comparative study of manufacturing condyle implant using rapid prototyping and CNC machining

NASA Astrophysics Data System (ADS)

Bojanampati, S.; Karthikeyan, R.; Islam, MD; Venugopal, S.

2018-04-01

Injuries to the cranio-maxillofacial area caused by road traffic accidents (RTAs), fall from heights, birth defects, metabolic disorders and tumors affect a rising number of patients in the United Arab Emirates (UAE), and require maxillofacial surgery. Mandibular reconstruction poses a specific challenge in both functionality and aesthetics, and involves replacement of the damaged bone by a custom made implant. Due to material, design cycle time and manufacturing process time, such implants are in many instances not affordable to patients. In this paper, the feasibility of designing and manufacturing low-cost, custom made condyle implant is assessed using two different approaches, consisting of rapid prototyping and three-axis computer numerically controlled (CNC) machining. Two candidate rapid prototyping techniques are considered, namely fused deposition modeling (FDM) and three-dimensional printing followed by sand casting The feasibility of the proposed manufacturing processes is evaluated based on manufacturing time, cost, quality, and reliability.

Lean manufacturing: A better way for enhancement in productivity

NASA Astrophysics Data System (ADS)

Kumar Ahir, Pankaj; Kumar Yadav, Lalit; Singh Chandrawat, Saurabh

2012-03-01

Productivity is the impact of peoples working together. Machines are merely an extended way of collective imagination and energy. Lean Manufacturing is the most used method for continues improvement of business. Organization management philosophy focusing on the reduction of wastage to improve overall customer value. "Lean" operating principles began in manufacturing environments and are known by a variety of synonyms; Lean Manufacturing, Lean Production, Toyota Production System, etc. It is commonly believed that Lean started in Japan "The notable activities in keeping the price of Ford products low is the steady restriction of the production cycle. The longer an article is in the process of manufacture and the more it is moved about, the greater is its ultimate cost." "A systematic approach to identifying and eliminating waste through continuous improvement, flowing the product at the pull of the customer in pursuit of perfection."

A Multi-Component Automated Laser-Origami System for Cyber-Manufacturing

NASA Astrophysics Data System (ADS)

Ko, Woo-Hyun; Srinivasa, Arun; Kumar, P. R.

2017-12-01

Cyber-manufacturing systems can be enhanced by an integrated network architecture that is easily configurable, reliable, and scalable. We consider a cyber-physical system for use in an origami-type laser-based custom manufacturing machine employing folding and cutting of sheet material to manufacture 3D objects. We have developed such a system for use in a laser-based autonomous custom manufacturing machine equipped with real-time sensing and control. The basic elements in the architecture are built around the laser processing machine. They include a sensing system to estimate the state of the workpiece, a control system determining control inputs for a laser system based on the estimated data and user’s job requests, a robotic arm manipulating the workpiece in the work space, and middleware, named Etherware, supporting the communication among the systems. We demonstrate automated 3D laser cutting and bending to fabricate a 3D product as an experimental result.

The Development of a Total Quality Management Plan for David Grant USAF Medical Center Travis Air Force Base, California

DTIC Science & Technology

1991-12-01

customer satisfaction (DOD, 1988). While the application of TQM in the manufacturing industry and the military acquisition system has been successful, the...improvement of products and services. The overriding objective of TOM is to increase customer satisfaction (DOD, 1988). While the application of TOM in the...25 Description of the Organization ................... 26 Internal Customers ..................... ....... 30 External Customers

Fabrication of a Cranial Prosthesis Combined with an Ocular Prosthesis Using Rapid Prototyping: A Case Report.

PubMed

Shankaran, Gayatri; Deogade, Suryakant Chhagan; Dhirawani, Rajesh

2016-01-01

Rapid prototyping (RP) is a technique of manufacturing parts by the additive layer manufacturing technology; where, a three-dimensional (3D) model created in a computer aided design (CAD) system is sectioned into 2D profiles, which are further constructed by RP layer by layer. Its use is not limited to industrial or engineering fields and has extended to the medical field for the manufacturing of custom implants and prostheses, the study of anatomy and surgical planning. Nowadays, dentists are more frequently encountered with the individuals affected with craniofacial defects due to trauma. In such cases, the craniomaxillofacial rehabilitation is a real challenge to bring the patients back to society and promote their well-being. The conventional impression technique for facial prosthesis fabrication has the disadvantage of deforming the soft tissue and causing discomfort for the patient. Herein, we describe the fabrication of a cranial prosthesis combined with an ocular prosthesis with RP and stereolithography.

Fabrication of a Cranial Prosthesis Combined with an Ocular Prosthesis Using Rapid Prototyping: A Case Report

PubMed Central

Shankaran, Gayatri; Dhirawani, Rajesh

2016-01-01

Rapid prototyping (RP) is a technique of manufacturing parts by the additive layer manufacturing technology; where, a three-dimensional (3D) model created in a computer aided design (CAD) system is sectioned into 2D profiles, which are further constructed by RP layer by layer. Its use is not limited to industrial or engineering fields and has extended to the medical field for the manufacturing of custom implants and prostheses, the study of anatomy and surgical planning. Nowadays, dentists are more frequently encountered with the individuals affected with craniofacial defects due to trauma. In such cases, the craniomaxillofacial rehabilitation is a real challenge to bring the patients back to society and promote their well-being. The conventional impression technique for facial prosthesis fabrication has the disadvantage of deforming the soft tissue and causing discomfort for the patient. Herein, we describe the fabrication of a cranial prosthesis combined with an ocular prosthesis with RP and stereolithography. PMID:27536331

The power of virtual integration: an interview with Dell Computer's Michael Dell. Interview by Joan Magretta.

PubMed

Dell, M

1998-01-01

Michael Dell started his computer company in 1984 with a simple business insight. He could bypass the dealer channel through which personal computers were then being sold and sell directly to customers, building products to order. Dell's direct model eliminated the dealer's markup and the risks associated with carrying large inventories of finished goods. In this interview, Michael Dell provides a detailed description of how his company is pushing that business model one step further, toward what he calls virtual integration. Dell is using technology and information to blur the traditional boundaries in the value chain between suppliers, manufacturers, and customers. The individual pieces of Dell's strategy--customer focus, supplier partnerships, mass customization, just-in-time manufacturing--may be all be familiar. But Michael Dell's business insight into how to combine them is highly innovative. Direct relationships with customers create valuable information, which in turn allows the company to coordinate its entire value chain back through manufacturing to product design. Dell describes how his company has come to achieve this tight coordination without the "drag effect" of ownership. Dell reaps the advantages of being vertically integrated without incurring the costs, all the while achieving the focus, agility, and speed of a virtual organization. As envisioned by Michael Dell, virtual integration may well become a new organizational model for the information age.

76 FR 51401 - Manufacturer of Controlled Substances; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... bulk manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana... development and for distribution to its customers. In reference to drug code 7360 (Marihuana), the company...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawlowski, Alex E.; Splitter, Derek A.; Muth, Thomas R.

Additive manufacturing by itself provides many benefits, but by combining different materials processing techniques like traditional casting with additive manufacturing to create hybrid processes, custom materials can be tailor-made and mass produced for applications with specific performance needs.

26 CFR 1.864-4 - U.S. source income effectively connected with U.S. business.

Code of Federal Regulations, 2010 CFR

2010-04-01

... customers in the United States for the machine tools manufactured by that corporation. All negotiations with... the conduct of a business in the United States by M. Occasionally, during 1968 the customers in the... customers without routing the transactions through its branch office in the United States. The income or...

19 CFR 191.173 - Imported duty-paid derivatives (no manufacture).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Imported duty-paid derivatives (no manufacture... SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Substitution of Finished Petroleum Derivatives § 191.173 Imported duty-paid derivatives (no manufacture). When the basis for drawback under 19 U.S.C...

19 CFR 115.12 - Records maintained by Certifying Authority.

Code of Federal Regulations, 2012 CFR

2012-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... the manufacturer and/or owner or operator for the certification of a container or a road vehicle. (2... containers manufactured under a design type approval, and containers approved at a stage after manufacture...

19 CFR 115.12 - Records maintained by Certifying Authority.

Code of Federal Regulations, 2014 CFR

2014-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... the manufacturer and/or owner or operator for the certification of a container or a road vehicle. (2... containers manufactured under a design type approval, and containers approved at a stage after manufacture...

19 CFR 115.12 - Records maintained by Certifying Authority.

Code of Federal Regulations, 2013 CFR

2013-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... the manufacturer and/or owner or operator for the certification of a container or a road vehicle. (2... containers manufactured under a design type approval, and containers approved at a stage after manufacture...

19 CFR 115.12 - Records maintained by Certifying Authority.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... the manufacturer and/or owner or operator for the certification of a container or a road vehicle. (2... containers manufactured under a design type approval, and containers approved at a stage after manufacture...

19 CFR 115.12 - Records maintained by Certifying Authority.

Code of Federal Regulations, 2011 CFR

2011-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... the manufacturer and/or owner or operator for the certification of a container or a road vehicle. (2... containers manufactured under a design type approval, and containers approved at a stage after manufacture...

76 FR 60452 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... food packaging solutions. EuroPlast, Ltd 100 S. Industrial Lane, 9/9/2011 The firm manufactures plastic... Centech Road, Omaha, 9/19/2011 The firm designs and NE 68138. manufactures equipment used to manufacture... manufactures custom Covington, LA 70433. cabinetry and millwork. Oakridge Seafood, LLC 3408 E. Old Spanish 9/12...

76 FR 66994 - Manufacturer of Controlled Substances; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... following basic classes of controlled substances: Drug Schedule Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives for use by their customers in analytical kits...

77 FR 2324 - Manufacturer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-17

... manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana (7360) I... distribution to its customers. In reference to drug code 7360 (Marihuana), the company plans to bulk...

76 FR 51401 - Manufacturer of Controlled Substances; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... a bulk manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana... ingredients (APIs) for distribution to its customers. In reference to drug code 7360 (Marihuana), the company...

76 FR 17968 - Manufacturer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-31

... manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana (7360) I... distribution to its customers. In reference to drug code 7360 (Marihuana), the company plans to bulk...

76 FR 4282 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... Northampton, PA 18067. prototyping, prototype development, and manufacturing engineering consulting services.... manufactures various wear and corrosion resistant silicon carbide components for industrial customers. Any...

The effects assessment of firm environmental strategy and customer environmental conscious on green product development.

PubMed

Tsai, Ming-Tien; Chuang, Li-Min; Chao, Shu-Tsung; Chang, Hsiao-Ping

2012-07-01

The purpose of this study is to examine why both parties (industry and consumer market) have mutual interests in protecting the environment but they still are hesitant to act green. The study used two-stage sampling from consumer market to depict ideal green product characteristics and reliable toy companies, and visit these companies for the second sample collection to examine whether the organizational eco-innovation strategy with customer value has a positive effect on green product development. In other words, the customer's benefit is an important factor for new product development strategy for green toys. This research shows that the willingness to buy green toys increases if most people in society buy green toys. This represents that customers are environmentally conscious and care about protecting the environment, or buying green toys is the result of a new economic trend and childhood education. The willingness to buy green toys increases if customers think that green products implies an enhancement on new product development to toy manufacturers. Further, if manufacturers are able to manage the difficulty of cooperation with all parties in the supply chain and difficulties related to production, they are willing to adopt customers' perceived value on green toys for their new product development strategy. It is rare to find academic research discussing the perspectives of both consumers and manufacturers in the same study because the research topic is very broad and many conditions must be considered. This research aims to find the effect of consumer-perceived value and company eco-innovation on green product development.

Engineering specification and system design for CAD/CAM of custom shoes: UMC project effort

NASA Technical Reports Server (NTRS)

Bao, Han P.

1991-01-01

The goal of this project is to supplement the footwear design system of North Carolina State University (NCSU) with a software module to design and manufacture a combination sole. The four areas of concentration were: customization of NASCAD (NASA Computer Aided Design) to the footwear project; use of CENCIT data; computer aided manufacturing activities; and beginning work for the bottom elements of shoes. The task of generating a software module for producing a sole was completed with a demonstrated product realization. The software written in C was delivered to NCSU for inclusion in their design system for custom footwear known as LASTMOD. The machining process of the shoe last was improved using a spiral tool path approach.

78 FR 69130 - Importer of Controlled Substances; Notice of Application; Cerilliant Corporation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-18

... substances for manufacture and distribution to their research and forensic customers conducting drug testing and analysis. Any bulk manufacturer who is presently, or is applying to be, registered with DEA to...

78 FR 23959 - Manufacturer of Controlled Substances; Notice of Registration; Cayman Chemical Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

... plans to manufacture the listed controlled substances for distribution to their research and forensic customers conducting drug testing and analysis. No comments or objections have been received. DEA has...

78 FR 64018 - Manufacturer of Controlled Substances; Notice of Application; GE Healthcare

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... listed in schedule II. The company plans to manufacture a radioactive product to diagnose Parkinson's disease for distribution to its customers. Any other such applicant, and any person who is presently...

77 FR 75670 - Manufacturer of Controlled Substances, Notice of Registration, AMRI Rensselaer, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-21

... bulk manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana... development and for distribution to its customers. In reference to drug code 7360 (Marihuana), the company...

77 FR 52368 - Manufacturer of Controlled Substances; Notice of Registration; Austin Pharma, LLC.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... a bulk manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana... ingredients (APIs) for distribution to its customers. In reference to drug code 7360 (Marihuana), the company...

77 FR 30327 - Manufacturer of Controlled Substances; Notice Of Application; Research Triangle Institute

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

... the following basic classes of controlled substances: Drug Schedule Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives for use by their customers in...

77 FR 55504 - Manufacturer of Controlled Substances; Notice of Registration; Research Triangle Institute

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... classes of controlled substances: Drug Schedule Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives for use by their customers in analytical kits, reagents, and...

77 FR 30027 - Manufacturer of Controlled Substances; Notice of Application; Austin Pharma, LLC.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I The company plans to manufacture bulk active pharmaceutical ingredients (APIs) for distribution to its customers. In reference to drug code 7360 (Marihuana...

Northwest Manufacturing Initiative

DTIC Science & Technology

2013-04-23

each of which specifies paper of a certain weight and width. The plant combines jobs within each weight into sets, with no regard to which customer ...are made by railcars, each of which is dedicated to one customer . Long production runs imply that maximizing railcar utilization requires holding the...Susan Einberger, Colin Geartiy, Eugene Gonzales, Brooke Standifer, Ben West Industry Sponsor: Mike Steck, Senior Director, Customer Marketing and

Additive Manufacturing for Highly Efficient Window Inserts CRADA Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roschli, Alex C.; Chesser, Phillip C.; Love, Lonnie J.

ORNL partnered with the Mackinac Technology Company to demonstrate how additive manufacturing can be used to create highly energy efficient window inserts for retrofit in pre-existing buildings. Many early iterations of the window inserts were fabricated using carbon fiber reinforced thermoplastics and polycarbonate films as a stand in for the low-e coated films produced by the Mackinac Technology Company. After demonstration of the proof of concept, i.e. custom window inserts with tensioned film, the materials used for the manufacture of the frames was more closely examined. Hollow particle-filled syntactic foam and low-density polymer composites formed by expandable microspheres were exploredmore » as the materials used to additively manufacture the frames of the inserts. It was concluded that low-cost retrofit window inserts in custom sizes could be easily fabricated using large scale additive manufacturing. Furthermore, the syntactic and expanded foams developed and tested satisfy the mechanical performance requirements for the application.« less

19 CFR 191.174 - Derivatives manufactured under 19 U.S.C. 1313(a) or (b).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Derivatives manufactured under 19 U.S.C. 1313(a... Derivatives § 191.174 Derivatives manufactured under 19 U.S.C. 1313(a) or (b). When the basis for drawback under 19 U.S.C. 1313(p) is petroleum derivatives which were manufactured or produced in the United...

Undergraduate Quality Management Project: Motorcycle Manufacturer Vendor Rating System

ERIC Educational Resources Information Center

Baker, James; McHaney, Roger

2009-01-01

A major motorcycle vendor, based in the U.S. Midwest, is the world's largest custom V-Twin motorcycle manufacturer and domestically the second largest motorcycle manufacturer behind Harley-Davidson. This project describes the process used used by a K-State undergraduate distance learning student to design and develop the initial version of a…

19 CFR 134.35 - Articles substantially changed by manufacture.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Articles substantially changed by manufacture. 134...; DEPARTMENT OF THE TREASURY COUNTRY OF ORIGIN MARKING Exceptions to Marking Requirements § 134.35 Articles substantially changed by manufacture. (a) Articles other than goods of a NAFTA country. An article used in the...

19 CFR 134.35 - Articles substantially changed by manufacture.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Articles substantially changed by manufacture. 134...; DEPARTMENT OF THE TREASURY COUNTRY OF ORIGIN MARKING Exceptions to Marking Requirements § 134.35 Articles substantially changed by manufacture. (a) Articles other than goods of a NAFTA country. An article used in the...

19 CFR 134.35 - Articles substantially changed by manufacture.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Articles substantially changed by manufacture. 134...; DEPARTMENT OF THE TREASURY COUNTRY OF ORIGIN MARKING Exceptions to Marking Requirements § 134.35 Articles substantially changed by manufacture. (a) Articles other than goods of a NAFTA country. An article used in the...

Why Manufacturers Do--and Do Not--Attend Educational Seminars. SBDC Professional Enrichment.

ERIC Educational Resources Information Center

Swanson, David

Examination of numerous studies of executives of small manufacturing firms in Iowa offered insights on their attitudes and actions regarding educational seminars. Findings showed that 62.7 percent of manufacturers attended at least one seminar in the last year. The term "seminar" had a better customer satisfaction rating than…

19 CFR 102.23 - Origin and Manufacturer Identification

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.23 Origin and Manufacturer Identification (a... 19 Customs Duties 1 2010-04-01 2010-04-01 false Origin and Manufacturer Identification 102.23... address of the entity performing the origin-conferring operations pursuant to § 102.21 or § 102.22, as...

Feasibility study for converting traditional line assembly into work cells for termination of fiber optics cable

NASA Astrophysics Data System (ADS)

Caldeira, Rylan; Honnungar, Sunilkumar

2018-04-01

Most of small to medium industries tend to follow traditional systems of manufacturing which aims at maximum resource utilization irrespective of giving attention to customers volatile demand. In recent times manufacturing is being shifted to be consumers centered, with intense competition among industries to satisfy the customer needs in the required quantity and at the right time. To achieve this, companies investigate the possibility of implementation of cellular manufacturing which is characterized by high variety with optimum usage of resources. Cellular layout coupled with the application of lean methodology, places focus on the production process rather than the production methods so as to identify the wastage and apply methods to further improve productivity.

40 CFR 86.1838-01 - Small volume manufacturer certification procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... paragraph (c)(2). (i) Small volume in-use verification test vehicles may be procured from customers or may... miles, a manufacturer may demonstrate to the satisfaction of the Agency that, based on owner survey data...

78 FR 30332 - Manufacturer of Controlled Substances, Notice of Application, Austin Pharma, Llc.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

...) to be registered as a bulk manufacturer of Marihuana (7360), a basic class of controlled substance... distribution to its customers. In reference to drug code 7360 (Marihuana), the company plans to bulk...

Supply chain model with price- and trade credit-sensitive demand under two-level permissible delay in payments

NASA Astrophysics Data System (ADS)

Giri, B. C.; Maiti, T.

2013-05-01

This article develops a single-manufacturer and single-retailer supply chain model under two-level permissible delay in payments when the manufacturer follows a lot-for-lot policy in response to the retailer's demand. The manufacturer offers a trade credit period to the retailer with the contract that the retailer must share a fraction of the profit earned during the trade credit period. On the other hand, the retailer provides his customer a partial trade credit which is less than that of the manufacturer. The demand at the retailer is assumed to be dependent on the selling price and the trade credit period offered to the customers. The average net profit of the supply chain is derived and an algorithm for finding the optimal solution is developed. Numerical examples are given to demonstrate the coordination policy of the supply chain and examine the sensitivity of key model-parameters.

A new application for food customization with additive manufacturing technologies

NASA Astrophysics Data System (ADS)

Serenó, L.; Vallicrosa, G.; Delgado, J.; Ciurana, J.

2012-04-01

Additive Manufacturing (AM) technologies have emerged as a freeform approach capable of producing almost any complete three dimensional (3D) objects from computer-aided design (CAD) data by successively adding material layer by layer. Despite the broad range of possibilities, commercial AM technologies remain complex and expensive, making them suitable only for niche applications. The developments of the Fab@Home system as an open AM technology discovered a new range of possibilities of processing different materials such as edible products. The main objective of this work is to analyze and optimize the manufacturing capacity of this system when producing 3D edible objects. A new heated syringe deposition tool was developed and several process parameters were optimized to adapt this technology to consumers' needs. The results revealed in this study show the potential of this system to produce customized edible objects without qualified personnel knowledge, therefore saving manufacturing costs compared to traditional technologies.

Rapid production of hollow SS316 profiles by extrusion based additive manufacturing

NASA Astrophysics Data System (ADS)

Rane, Kedarnath; Cataldo, Salvatore; Parenti, Paolo; Sbaglia, Luca; Mussi, Valerio; Annoni, Massimiliano; Giberti, Hermes; Strano, Matteo

2018-05-01

Complex shaped stainless steel tubes are often required for special purpose biomedical equipment. Nevertheless, traditional manufacturing technologies, such as extrusion, lack the ability to compete in a market of customized complex components because of associated expenses towards tooling and extrusion presses. To rapid manufacture few of such components with low cost and high precision, a new Extrusion based Additive Manufacturing (EAM) process, is proposed in this paper, and as an example, short stainless steel 316L complex shaped and sectioned tubes were prepared by EAM. Several sample parts were produced using this process; the dimensional stability, surface roughness and chemical composition of sintered samples were investigated to prove process competence. The results indicate that feedstock with a 316L particle content of 92.5 wt. % can be prepared with a sigma blade mixing, whose rheological behavior is fit for EAM. The green samples have sufficient strength to handle them for subsequent treatments. The sintered samples considerably shrunk to designed dimensions and have a homogeneous microstructure to impart mechanical strength. Whereas, maintaining comparable dimensional accuracy and chemical composition which are required for biomedical equipment still need iterations, a kinematic correction and modification in debinding cycle was proposed.

27 CFR 19.607 - Marks on cases.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Cases removed for export, transfer to customs bonded warehouses or customs manufacturing bonded warehouses, transfer to foreign-trade zones, or for use as supplies on certain vessels and aircraft, shall...; or (6) Labels or data describing the contents for commercial identification or accounting purposes...

Use of prefabricated titanium abutments and customized anatomic lithium disilicate structures for cement-retained implant restorations in the esthetic zone.

PubMed

Lin, Wei-Shao; Harris, Bryan T; Zandinejad, Amirali; Martin, William C; Morton, Dean

2014-03-01

This report describes the fabrication of customized abutments consisting of prefabricated 2-piece titanium abutments and customized anatomic lithium disilicate structures for cement-retained implant restorations in the esthetic zone. The heat-pressed lithium disilicate provides esthetic customized anatomic structures and crowns independently of the computer-aided design and computer-aided manufacturing process. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Application of computer graphics in the design of custom orthopedic implants.

PubMed

Bechtold, J E

1986-10-01

Implementation of newly developed computer modelling techniques and computer graphics displays and software have greatly aided the orthopedic design engineer and physician in creating a custom implant with good anatomic conformity in a short turnaround time. Further advances in computerized design and manufacturing will continue to simplify the development of custom prostheses and enlarge their niche in the joint replacement market.

Retailer Stackelberg game in a supply chain with pricing and service decisions and simple price discount contract.

PubMed

Sadjadi, Seyed Jafar; Asadi, Hashem; Sadeghian, Ramin; Sahebi, Hadi

2018-01-01

This paper studies the Retailer Stackelberg game in a supply chain consisting of two manufacturers and one retailer where they compete simultaneously under three factors including price, service and simple price discount contract. It is assumed that the second manufacturer provides service directly to his customers, and the retailer provides service for the first product's customers, while the retailer buys the first product under price discount from the first manufacturer. The analysis of the optimal equilibrium solutions and the results of the numerical examples show that if a manufacturer chooses the appropriate range of discount rate, he will gain more profit than when there is no discount given to the retailer. This situation can be considered as an effective tool for the coordination of the first manufacturer and the retailer to offer discount by manufacturer and to provide the service by the retailer. We obtain equilibrium solution of Retailer Stackelberg game and analyze the numerical examples under two cases: a) the manufacturers sell their products to the retailer without price discount contract. b) The first manufacturer sells his products to the retailer with the simple price discount contract. The preliminary results show that the service and the price discount contract can improve the performance of supply chain.

Retailer Stackelberg game in a supply chain with pricing and service decisions and simple price discount contract

PubMed Central

Sadjadi, Seyed Jafar; Sadeghian, Ramin; Sahebi, Hadi

2018-01-01

This paper studies the Retailer Stackelberg game in a supply chain consisting of two manufacturers and one retailer where they compete simultaneously under three factors including price, service and simple price discount contract. It is assumed that the second manufacturer provides service directly to his customers, and the retailer provides service for the first product’s customers, while the retailer buys the first product under price discount from the first manufacturer. The analysis of the optimal equilibrium solutions and the results of the numerical examples show that if a manufacturer chooses the appropriate range of discount rate, he will gain more profit than when there is no discount given to the retailer. This situation can be considered as an effective tool for the coordination of the first manufacturer and the retailer to offer discount by manufacturer and to provide the service by the retailer. We obtain equilibrium solution of Retailer Stackelberg game and analyze the numerical examples under two cases: a) the manufacturers sell their products to the retailer without price discount contract. b) The first manufacturer sells his products to the retailer with the simple price discount contract. The preliminary results show that the service and the price discount contract can improve the performance of supply chain. PMID:29649315

29 CFR 779.348 - Goods must be made at the establishment which sells them.

Code of Federal Regulations, 2014 CFR

2014-07-01

... not be exempt. The latter is a manufacturing establishment. For example, a candy kitchen manufacturing candy for sale at separate retail outlets is a manufacturing establishment and not a retail... goods for sale to customers who will go to other places to buy them. Thus an establishment that makes or...

29 CFR 779.348 - Goods must be made at the establishment which sells them.

Code of Federal Regulations, 2013 CFR

2013-07-01

... not be exempt. The latter is a manufacturing establishment. For example, a candy kitchen manufacturing candy for sale at separate retail outlets is a manufacturing establishment and not a retail... goods for sale to customers who will go to other places to buy them. Thus an establishment that makes or...

29 CFR 779.348 - Goods must be made at the establishment which sells them.

Code of Federal Regulations, 2012 CFR

2012-07-01

... not be exempt. The latter is a manufacturing establishment. For example, a candy kitchen manufacturing candy for sale at separate retail outlets is a manufacturing establishment and not a retail... goods for sale to customers who will go to other places to buy them. Thus an establishment that makes or...

27 CFR 478.92 - How must licensed manufacturers and licensed importers identify firearms, armor piercing...

Code of Federal Regulations, 2010 CFR

2010-04-01

... Conduct of Business § 478.92 How must licensed manufacturers and licensed importers identify firearms... business; and (E) In the case of an imported firearm, the name of the country in which it was manufactured... place of business. For additional requirements relating to imported firearms, see Customs regulations at...

Users guide for WoodCite, a product cost quotation tool for wood component manufacturers [computer program

Treesearch

Jeff Palmer; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann

2014-01-01

WoodCite is a Microsoft® Access-based application that allows wood component manufacturers to develop product price quotations for their current and potential customers. The application was developed by the U.S. Forest Service and Virginia Polytechnic Institute and State University, in cooperation with the Wood Components Manufacturers Association.

Technology assessment of automation trends in the modular home industry

Treesearch

Phil Mitchell; Robert Russell Hurst

2009-01-01

This report provides an assessment of technology used in manufacturing modular homes in the United States, and that used in the German prefabricated wooden home industry. It is the first step toward identifying the research needs in automation and manufacturing methods that will facilitate mass customization in the home manufacturing industry. Within the United States...

A manufacturer's perspective: Hewlett Packard Y2K action plan.

PubMed

Rapp, W N

1999-01-01

Medical device manufacturers must ensure that their devices are safe and effective including investigating issues involved with the century rollover. Manufacturers must begin early to evaluate their products in order to allow time to correct and distribute these product corrections and communicate to their customers so they can prepare for the Y2K event.

19 CFR 191.174 - Derivatives manufactured under 19 U.S.C. 1313(a) or (b).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Derivatives manufactured under 19 U.S.C. 1313(a... HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Substitution of Finished Petroleum Derivatives § 191.174 Derivatives manufactured under 19 U.S.C. 1313(a) or (b). When the basis for drawback...

Air Force Manufacturing Technology. Year 2000 Project Book

DTIC Science & Technology

2000-01-01

Electronic Warfare Component Manufacturing 13 National Center for Manufacturing Science 14 Product Research Market Analysis System 15 Electronics Acoustic...other agile organizations that can respond to rapidly changing market demands. Approach This program demonstrated and evaluated the advanced design...production worker contact with customers and suppliers; shopfloor identification of new technologies, markets , and products; and strategic planning to assure

Zygomatico-maxillary Reconstruction with Computer-aided Manufacturing of a Free DCIA Osseous Flap and Intraoral Anastomoses.

PubMed

Roy, Andrée-Anne; Efanov, Johnny I; Mercier-Couture, Geneviève; Chollet, André; Borsuk, Daniel E

2017-02-01

Craniomaxillofacial reconstruction using virtual surgical planning, computer-aided manufacturing, and new microsurgical techniques optimizes patient-specific and defect-directed reconstruction. A 3D customized free deep circumflex iliac artery (DCIA) flap with intraoral anastomoses was performed on a 23-year-old man with a posttraumatic right zygomatico-maxillary defect with failure of alloplastic implant reconstruction. An osseous iliac crest flap was sculpted based on a customized 3D model of the mirror image of the patient's unaffected side to allow for perfect fit to the zygomatico-maxillary defect. An intraoral dissection of the facial artery and vein was performed within the right cheek mucosa and allowed for end-to-end microvascular anastomoses. 3D preoperative planning and customized free DCIA osseous flap combined with an intraoral microsurgical technique provided restoration of facial esthetics and function without visible scars. In cases where zygomatico-malar reconstruction by alloplastic material fails, a customized free DCIA osseous flap can be designed by virtual surgical planning to restore facial appearance and function.

Transistor screening evaluation SJ6708H

NASA Technical Reports Server (NTRS)

Barton, J. L.

1978-01-01

A manufacturer was contracted to screen 125 transistors capable of withstanding the high level inductive voltages obtained when switching inductive loads. Planned differences included a change in die bonding to comply with NASA's desire for hard solder die attachment which further necessitated a change in package to conform to the required die mounting system. Evaluation of the electrical performance and recommended changes were made during the preliminary build phase of the program. The following sections are outlined: (1) narrative outline; (2) customer data summary and X-ray reports; (3) device specification; (4) failure analysis reports; (5) test facilities list; and (6) test measurement data.

18 CFR 366.3 - Exemption from Commission access to books and records; waivers of accounting, record-retention...

Code of Federal Regulations, 2012 CFR

2012-04-01

...)). (vii) Natural gas companies that distribute natural or manufactured gas at retail to industrial or electric generation customers and/or distribute de minimis amounts of natural or manufactured gas at retail...

19 CFR 115.25 - General.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers by Design Type § 115.25 General. The Certifying Authority shall, at the request of a manufacturer, evaluate containers for approval by design type during the manufacturing stage. ...

19 CFR 115.25 - General.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers by Design Type § 115.25 General. The Certifying Authority shall, at the request of a manufacturer, evaluate containers for approval by design type during the manufacturing stage. ...

19 CFR 115.25 - General.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers by Design Type § 115.25 General. The Certifying Authority shall, at the request of a manufacturer, evaluate containers for approval by design type during the manufacturing stage. ...

19 CFR 115.25 - General.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers by Design Type § 115.25 General. The Certifying Authority shall, at the request of a manufacturer, evaluate containers for approval by design type during the manufacturing stage. ...

19 CFR 115.25 - General.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers by Design Type § 115.25 General. The Certifying Authority shall, at the request of a manufacturer, evaluate containers for approval by design type during the manufacturing stage. ...

Application of quality by design for 3D printed bone prostheses and scaffolds

PubMed Central

Martinez-Marquez, Daniel; Mirnajafizadeh, Ali; Carty, Christopher P.

2018-01-01

3D printing is an emergent manufacturing technology recently being applied in the medical field for the development of custom bone prostheses and scaffolds. However, successful industry transformation to this new design and manufacturing approach requires technology integration, concurrent multi-disciplinary collaboration, and a robust quality management framework. This latter change enabler is the focus of this study. While a number of comprehensive quality frameworks have been developed in recent decades to ensure that the manufacturing of medical devices produces reliable products, they are centred on the traditional context of standardised manufacturing techniques. The advent of 3D printing technologies and the prospects for mass customisation provides significant market opportunities, but also presents a serious challenge to regulatory bodies tasked with managing and assuring product quality and safety. Before 3D printing bone prostheses and scaffolds can gain traction, industry stakeholders, such as regulators, clients, medical practitioners, insurers, lawyers, and manufacturers, would all require a high degree of confidence that customised manufacturing can achieve the same quality outcomes as standardised manufacturing. A Quality by Design (QbD) approach to custom 3D printed prostheses can help to ensure that products are designed and manufactured correctly from the beginning without errors. This paper reports on the adaptation of the QbD approach for the development process of 3D printed custom bone prosthesis and scaffolds. This was achieved through the identification of the Critical Quality Attributes of such products, and an extensive review of different design and fabrication methods for 3D printed bone prostheses. Research outcomes include the development of a comprehensive design and fabrication process flow diagram, and categorised risks associated with the design and fabrication processes of such products. An extensive systematic literature review and post-hoc evaluation survey with experts was completed to evaluate the likely effectiveness of the herein suggested QbD framework. PMID:29649231

Application of quality by design for 3D printed bone prostheses and scaffolds.

PubMed

Martinez-Marquez, Daniel; Mirnajafizadeh, Ali; Carty, Christopher P; Stewart, Rodney A

2018-01-01

3D printing is an emergent manufacturing technology recently being applied in the medical field for the development of custom bone prostheses and scaffolds. However, successful industry transformation to this new design and manufacturing approach requires technology integration, concurrent multi-disciplinary collaboration, and a robust quality management framework. This latter change enabler is the focus of this study. While a number of comprehensive quality frameworks have been developed in recent decades to ensure that the manufacturing of medical devices produces reliable products, they are centred on the traditional context of standardised manufacturing techniques. The advent of 3D printing technologies and the prospects for mass customisation provides significant market opportunities, but also presents a serious challenge to regulatory bodies tasked with managing and assuring product quality and safety. Before 3D printing bone prostheses and scaffolds can gain traction, industry stakeholders, such as regulators, clients, medical practitioners, insurers, lawyers, and manufacturers, would all require a high degree of confidence that customised manufacturing can achieve the same quality outcomes as standardised manufacturing. A Quality by Design (QbD) approach to custom 3D printed prostheses can help to ensure that products are designed and manufactured correctly from the beginning without errors. This paper reports on the adaptation of the QbD approach for the development process of 3D printed custom bone prosthesis and scaffolds. This was achieved through the identification of the Critical Quality Attributes of such products, and an extensive review of different design and fabrication methods for 3D printed bone prostheses. Research outcomes include the development of a comprehensive design and fabrication process flow diagram, and categorised risks associated with the design and fabrication processes of such products. An extensive systematic literature review and post-hoc evaluation survey with experts was completed to evaluate the likely effectiveness of the herein suggested QbD framework.

3D printing for health & wealth: Fabrication of custom-made medical devices through additive manufacturing

NASA Astrophysics Data System (ADS)

Colpani, Alessandro; Fiorentino, Antonio; Ceretti, Elisabetta

2018-05-01

Additive Manufacturing (AM) differs from traditional manufacturing technologies by its ability to handle complex shapes with great design flexibility. These features make the technique suitable to fabricate customized components, particularly answering specific custom needs. Although AM mainly referred to prototyping, nowadays the interest in direct manufacturing of actual parts is growing. This article shows the application of AM within the project 3DP-4H&W (3D Printing for Health & Wealth) which involves engineers and physicians for developing pediatric custom-made medical devices to enhance the fulfilling of the patients specific needs. In the project, two types of devices made of a two-component biocompatible silicone are considered. The first application (dental field) consists in a device for cleft lip and palate. The second one (audiological field) consists in an acoustic prosthesis. The geometries of the devices are based on the anatomy of the patient that is obtained through a 3D body scan process. For both devices, two different approaches were planned, namely direct AM and indirect Rapid Tooling (RT). In particular, direct AM consists in the FDM processing of silicone, while RT consists in molds FDM fabrication followed by silicone casting. This paper presents the results of the RT method that is articulated in different phases: the acquisition of the geometry to be realized, the design of the molds taking into account the casting feasibility (as casting channel, vents, part extraction), the realization of molds produced through AM, molds surface chemical finishing, pouring and curing of the silicone. The fabricated devices were evaluated by the physicians team that confirmed the effectiveness of the proposed procedure in fabricating the desired devices. Moreover, the procedure can be used as a general method to extend the range of applications to any custom-made device for anatomic districts, especially where complex shapes are present (as tracheal or maxillary prostheses).

19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., manufacturer, or carrier), it must be clearly and legibly marked with a unique company name (or logotype) and..., Headquarters, U.S. Customs Service, Washington DC 20229. [T.D. 81-185, 46 FR 36842, July 16, 1981, as amended...

19 CFR 115.40 - Technical requirements for containers.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... containers. A container that is submitted for inspection for approval after manufacture, must comply with the... 19 Customs Duties 1 2010-04-01 2010-04-01 false Technical requirements for containers. 115.40...

19 CFR 115.40 - Technical requirements for containers.

Code of Federal Regulations, 2012 CFR

2012-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... containers. A container that is submitted for inspection for approval after manufacture, must comply with the... 19 Customs Duties 1 2012-04-01 2012-04-01 false Technical requirements for containers. 115.40...

19 CFR 115.40 - Technical requirements for containers.

Code of Federal Regulations, 2011 CFR

2011-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... containers. A container that is submitted for inspection for approval after manufacture, must comply with the... 19 Customs Duties 1 2011-04-01 2011-04-01 false Technical requirements for containers. 115.40...

19 CFR 115.40 - Technical requirements for containers.

Code of Federal Regulations, 2013 CFR

2013-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... containers. A container that is submitted for inspection for approval after manufacture, must comply with the... 19 Customs Duties 1 2013-04-01 2013-04-01 false Technical requirements for containers. 115.40...

19 CFR 115.40 - Technical requirements for containers.

Code of Federal Regulations, 2014 CFR

2014-04-01

...; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS... containers. A container that is submitted for inspection for approval after manufacture, must comply with the... 19 Customs Duties 1 2014-04-01 2014-04-01 false Technical requirements for containers. 115.40...

Computer-Assisted Virtual Planning for Surgical Guide Manufacturing and Internal Distractor Adaptation in the Management of Midface Hypoplasia in Cleft Patients.

PubMed

Scolozzi, Paolo; Herzog, Georges

2017-07-01

We are reporting the treatment of severe maxillary hypoplasia in two patients with unilateral cleft lip and palate by using a specific approach combining the Le Fort I distraction osteogenesis technique coupled with computer-aided design/computer-aided manufacturing customized surgical guides and internal distractors based on virtual computational planning. This technology allows for the transfer of the virtual planned reconstruction to the operating room by using custom patient-specific implants, surgical splints, surgical cutting guides, and surgical guides to plate or distractor adaptation.

PCS: a pallet costing system for wood pallet manufacturers (version 1.0 for Windows®)

Treesearch

A. Jefferson, Jr. Palmer; Cynthia D. West; Bruce G. Hansen; Marshall S. White; Hal L. Mitchell

2002-01-01

The Pallet Costing System (PCS) is a computer-based, Microsoft Windows® application that computes the total and per-unit cost of manufacturing an order of wood pallets. Information about the manufacturing facility, along with the pallet-order requirements provided by the customer, is used in determining production cost. The major cost factors addressed by PCS...

19 CFR 115.39 - Eligibility.

Code of Federal Regulations, 2011 CFR

2011-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.39 Eligibility. The owner or operator may submit containers to be approved after the manufacturing stage to: (a) The Certifying Authority of the country of...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2012 CFR

2012-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.37 - General.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers After Manufacture § 115.37 General. This subpart provides for the approval and certification of containers after manufacture, and for those altered so as to void their design type approval. ...

19 CFR 115.37 - General.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers After Manufacture § 115.37 General. This subpart provides for the approval and certification of containers after manufacture, and for those altered so as to void their design type approval. ...

19 CFR 115.39 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.39 Eligibility. The owner or operator may submit containers to be approved after the manufacturing stage to: (a) The Certifying Authority of the country of...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2011 CFR

2011-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.37 - General.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers After Manufacture § 115.37 General. This subpart provides for the approval and certification of containers after manufacture, and for those altered so as to void their design type approval. ...

19 CFR 115.39 - Eligibility.

Code of Federal Regulations, 2013 CFR

2013-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.39 Eligibility. The owner or operator may submit containers to be approved after the manufacturing stage to: (a) The Certifying Authority of the country of...

19 CFR 115.39 - Eligibility.

Code of Federal Regulations, 2014 CFR

2014-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.39 Eligibility. The owner or operator may submit containers to be approved after the manufacturing stage to: (a) The Certifying Authority of the country of...

19 CFR 115.39 - Eligibility.

Code of Federal Regulations, 2012 CFR

2012-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.39 Eligibility. The owner or operator may submit containers to be approved after the manufacturing stage to: (a) The Certifying Authority of the country of...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2014 CFR

2014-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2013 CFR

2013-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.37 - General.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers After Manufacture § 115.37 General. This subpart provides for the approval and certification of containers after manufacture, and for those altered so as to void their design type approval. ...

19 CFR 115.37 - General.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER... of Containers After Manufacture § 115.37 General. This subpart provides for the approval and certification of containers after manufacture, and for those altered so as to void their design type approval. ...

Two different techniques of manufacturing TMJ replacements - A technical report.

PubMed

Kozakiewicz, Marcin; Wach, Tomasz; Szymor, Piotr; Zieliński, Rafał

2017-09-01

Presently, during the surgical treatment of the patients in maxillofacial surgery, one can use various medical implants. Moreover custom made implants are being used. Replacements may be fitted to the structure and shape of the human skull owing to CAD/CAM (custom aided design/manufacture) called customized implants. This study was aimed to report for the first time clinical material from which custom implants, using two different techniques, were manufactured to reconstruct the temporomandibular joint (TMJ). In this study, eleven patients with an average age of 54 years were included. All of the patients underwent TMJ reconstruction using direct metal laser sintering (DMLS) or computer numerical control milling (CNC) techniques for implant manufacture. Four of the eleven patients had a malignancy diagnosis, and seven had a benign diagnosis. Patients complained of hypomobility of the TMJ, facial asymmetry, pain and swelling of the preauricular region. Treatment included 7 CNC milled implants and 4 implants in DMLS. More metallic implant parts with a rough surface were associated with the DMLS technique. Post operational, uneventful healing was observed in all clinical cases during an average of 26.8 months of follow-up. Three months post-operation, facial nerve palsy, swallowing disturbances and pain were not observed. Infections, allergic reactions to materials and re-ankylosis were also not observed. Replacements received correct forms and functions owing to the CAM techniques. Post-operational maximal interincisal opening improved (p < 0.01) and was not significantly related to preoperational opening, age, sex, diagnosis or adjuvant radiotherapy. Considering both methods, the feature that differentiates the manufacture technique is the more subtractive surface finishing required for the DMLS implant than the CNC implant. Both techniques resulted the same clinical outcomes and can be used successfully in patients with neoplastic lesions and other TMJ disorders. Unfortunately, DMLS is more vulnerable to fracture. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Customer Service/Telephone Communications.

ERIC Educational Resources Information Center

Fletcher, Karen

This document is the facilitator's edition of a curriculum designed to be presented as a four-session workshop for customer service and credit department employees of a manufacturing company. It was developed by educators from the Emily Griffith Opportunity School. The workshop is designed around a basic communication model incorporating the three…

75 FR 19972 - Public Information Collections Approved by the Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

.... Expiration Date: 09/30/2010. Title: Spectrum Dashboard Customer Feedback. Form No.: N/A. Estimated Annual... Commission will use the Spectrum Dashboard Customer Feedback to obtain voluntary feedback from the wide range of stakeholders who will use the Spectrum Dashboard (e.g., individuals, licensees, manufacturers...

Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization

NASA Astrophysics Data System (ADS)

Basak, Amrita; Acharya, Ranadip; Das, Suman

2016-08-01

This paper focuses on additive manufacturing (AM) of single-crystal (SX) nickel-based superalloy CMSX-4 through scanning laser epitaxy (SLE). SLE, a powder bed fusion-based AM process was explored for the purpose of producing crack-free, dense deposits of CMSX-4 on top of similar chemistry investment-cast substrates. Optical microscopy and scanning electron microscopy (SEM) investigations revealed the presence of dendritic microstructures that consisted of fine γ' precipitates within the γ matrix in the deposit region. Computational fluid dynamics (CFD)-based process modeling, statistical design of experiments (DoE), and microstructural characterization techniques were combined to produce metallurgically bonded single-crystal deposits of more than 500 μm height in a single pass along the entire length of the substrate. A customized quantitative metallography based image analysis technique was employed for automatic extraction of various deposit quality metrics from the digital cross-sectional micrographs. The processing parameters were varied, and optimal processing windows were identified to obtain good quality deposits. The results reported here represent one of the few successes obtained in producing single-crystal epitaxial deposits through a powder bed fusion-based metal AM process and thus demonstrate the potential of SLE to repair and manufacture single-crystal hot section components of gas turbine systems from nickel-based superalloy powders.

Micro- to Macroroughness of Additively Manufactured Titanium Implants in Terms of Coagulation and Contact Activation.

PubMed

Klingvall Ek, Rebecca; Hong, Jaan; Thor, Andreas; Bäckström, Mikael; Rännar, Lars-Erik

This study aimed to evaluate how as-built electron beam melting (EBM) surface properties affect the onset of blood coagulation. The properties of EBM-manufactured implant surfaces for placement have, until now, remained largely unexplored in literature. Implants with conventional designs and custom-made implants have been manufactured using EBM technology and later placed into the human body. Many of the conventional implants used today, such as dental implants, display modified surfaces to optimize bone ingrowth, whereas custom-made implants, by and large, have machined surfaces. However, titanium in itself demonstrates good material properties for the purpose of bone ingrowth. Specimens manufactured using EBM were selected according to their surface roughness and process parameters. EBM-produced specimens, conventional machined titanium surfaces, as well as PVC surfaces for control were evaluated using the slide chamber model. A significant increase in activation was found, in all factors evaluated, between the machined samples and EBM-manufactured samples. The results show that EBM-manufactured implants with as-built surfaces augment the thrombogenic properties. EBM that uses Ti6Al4V powder appears to be a good manufacturing solution for load-bearing implants with bone anchorage. The as-built surfaces can be used "as is" for direct bone contact, although any surface treatment available for conventional implants can be performed on EBM-manufactured implants with a conventional design.

Measuring Customer Satisfaction: Practices of Leading Military and Commercial Service Organizations

DTIC Science & Technology

1994-09-01

back. The consumers message was clear: "the quality of goods and services would no longer be taken for granted" (2:6). This change in customer ...behavior and quality awareress became known as consumerism , and it spawned consumer interest groups that strongly influence nearly all manufacturing and...on their next purchase opportunity (31: 35). This suggests that the classical thinking on customer satisfaction and consumer loyalty is incomplete and

The sales learning curve.

PubMed

Leslie, Mark; Holloway, Charles A

2006-01-01

When a company launches a new product into a new market, the temptation is to immediately ramp up sales force capacity to gain customers as quickly as possible. But hiring a full sales force too early just causes the firm to burn through cash and fail to meet revenue expectations. Before it can sell an innovative product efficiently, the entire organization needs to learn how customers will acquire and use it, a process the authors call the sales learning curve. The concept of a learning curve is well understood in manufacturing. Employees transfer knowledge and experience back and forth between the production line and purchasing, manufacturing, engineering, planning, and operations. The sales learning curve unfolds similarly through the give-and-take between the company--marketing, sales, product support, and product development--and its customers. As customers adopt the product, the firm modifies both the offering and the processes associated with making and selling it. Progress along the manufacturing curve is measured by tracking cost per unit: The more a firm learns about the manufacturing process, the more efficient it becomes, and the lower the unit cost goes. Progress along the sales learning curve is measured in an analogous way: The more a company learns about the sales process, the more efficient it becomes at selling, and the higher the sales yield. As the sales yield increases, the sales learning process unfolds in three distinct phases--initiation, transition, and execution. Each phase requires a different size--and kind--of sales force and represents a different stage in a company's production, marketing, and sales strategies. Adjusting those strategies as the firm progresses along the sales learning curve allows managers to plan resource allocation more accurately, set appropriate expectations, avoid disastrous cash shortfalls, and reduce both the time and money required to turn a profit.

Manufacturing Planning Guide

NASA Technical Reports Server (NTRS)

Waid, Michael

2011-01-01

Manufacturing process, milestones and inputs are unknowns to first-time users of the manufacturing facilities. The Manufacturing Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their project engineering personnel in manufacturing planning and execution. Material covered includes a roadmap of the manufacturing process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Mandibular reconstruction after cancer: an in-house approach to manufacturing cutting guides.

PubMed

Bosc, R; Hersant, B; Carloni, R; Niddam, J; Bouhassira, J; De Kermadec, H; Bequignon, E; Wojcik, T; Julieron, M; Meningaud, J-P

2017-01-01

The restoration of mandibular bone defects after cancer can be facilitated by computer-assisted preoperative planning. The aim of this study was to assess an in-house manufacturing approach to customized cutting guides for use in the reconstruction of the mandible with osteocutaneous free flaps. A retrospective cohort study was performed, involving 18 patients who underwent mandibular reconstruction with a fibula free flap at three institutions during the period July 2012 to March 2015. A single surgeon designed and manufactured fibula and mandible cutting guides using a computer-aided design process and three-dimensional (3D) printing technology. The oncological outcomes, production parameters, and quality of the reconstructions performed for each patient were recorded. Computed tomography scans were acquired after surgery, and these were compared with the preoperative 3D models. Eighteen consecutive patients with squamous cell carcinoma underwent surgery and then reconstruction using this customized in-house surgical approach. The lengths of the fibula bone segments and the angle measurements in the simulations were similar to those of the postoperative volume rendering (P=0.61). The ease of access to 3D printing technology has enabled the computer-aided design and manufacturing of customized cutting guides for oral cancer treatment without the need for input from external laboratories. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control

NASA Astrophysics Data System (ADS)

Acharya, Ranadip; Das, Suman

2015-09-01

This article describes additive manufacturing (AM) of IN100, a high gamma-prime nickel-based superalloy, through scanning laser epitaxy (SLE), aimed at the creation of thick deposits onto like-chemistry substrates for enabling repair of turbine engine hot-section components. SLE is a metal powder bed-based laser AM technology developed for nickel-base superalloys with equiaxed, directionally solidified, and single-crystal microstructural morphologies. Here, we combine process modeling, statistical design-of-experiments (DoE), and microstructural characterization to demonstrate fully metallurgically bonded, crack-free and dense deposits exceeding 1000 μm of SLE-processed IN100 powder onto IN100 cast substrates produced in a single pass. A combined thermal-fluid flow-solidification model of the SLE process compliments DoE-based process development. A customized quantitative metallography technique analyzes digital cross-sectional micrographs and extracts various microstructural parameters, enabling process model validation and process parameter optimization. Microindentation measurements show an increase in the hardness by 10 pct in the deposit region compared to the cast substrate due to microstructural refinement. The results illustrate one of the very few successes reported for the crack-free deposition of IN100, a notoriously "non-weldable" hot-section alloy, thus establishing the potential of SLE as an AM method suitable for hot-section component repair and for future new-make components in high gamma-prime containing crack-prone nickel-based superalloys.

19 CFR 115.32 - Approval plates.

Code of Federal Regulations, 2012 CFR

2012-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.32 Approval plates. The manufacturer shall affix, in a clearly visible place on or near one of the doors or other main openings of each container manufactured to...

19 CFR 115.32 - Approval plates.

Code of Federal Regulations, 2013 CFR

2013-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.32 Approval plates. The manufacturer shall affix, in a clearly visible place on or near one of the doors or other main openings of each container manufactured to...

19 CFR 115.32 - Approval plates.

Code of Federal Regulations, 2014 CFR

2014-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.32 Approval plates. The manufacturer shall affix, in a clearly visible place on or near one of the doors or other main openings of each container manufactured to...

19 CFR 115.32 - Approval plates.

Code of Federal Regulations, 2011 CFR

2011-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.32 Approval plates. The manufacturer shall affix, in a clearly visible place on or near one of the doors or other main openings of each container manufactured to...

19 CFR 115.32 - Approval plates.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.32 Approval plates. The manufacturer shall affix, in a clearly visible place on or near one of the doors or other main openings of each container manufactured to...

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF CUSTOM MOLDED PLASTIC PRODUCTS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small- and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. Waste Minimization Assessment Centers (WMACs) were established at selected ...

Application of Additive Manufacturing in Oral and Maxillofacial Surgery.

PubMed

Farré-Guasch, Elisabet; Wolff, Jan; Helder, Marco N; Schulten, Engelbert A J M; Forouzanfar, Tim; Klein-Nulend, Jenneke

2015-12-01

Additive manufacturing is the process of joining materials to create objects from digital 3-dimensional (3D) model data, which is a promising technology in oral and maxillofacial surgery. The management of lost craniofacial tissues owing to congenital abnormalities, trauma, or cancer treatment poses a challenge to oral and maxillofacial surgeons. Many strategies have been proposed for the management of such defects, but autogenous bone grafts remain the gold standard for reconstructive bone surgery. Nevertheless, cell-based treatments using adipose stem cells combined with osteoconductive biomaterials or scaffolds have become a promising alternative to autogenous bone grafts. Such treatment protocols often require customized 3D scaffolds that fulfill functional and esthetic requirements, provide adequate blood supply, and meet the load-bearing requirements of the head. Currently, such customized 3D scaffolds are being manufactured using additive manufacturing technology. In this review, 2 of the current and emerging modalities for reconstruction of oral and maxillofacial bone defects are highlighted and discussed, namely human maxillary sinus floor elevation as a valid model to test bone tissue-engineering approaches enabling the application of 1-step surgical procedures and seeding of Good Manufacturing Practice-level adipose stem cells on computer-aided manufactured scaffolds to reconstruct large bone defects in a 2-step surgical procedure, in which cells are expanded ex vivo and seeded on resorbable scaffolds before implantation. Furthermore, imaging-guided tissue-engineering technologies to predetermine the surgical location and to facilitate the manufacturing of custom-made implants that meet the specific patient's demands are discussed. The potential of tissue-engineered constructs designed for the repair of large oral and maxillofacial bone defects in load-bearing situations in a 1-step surgical procedure combining these 2 innovative approaches is particularly emphasized. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

[Application and outlook of three-dimensional printing in prosthetic dentistry].

PubMed

Sun, Y C; Li, R; Zhou, Y S; Wang, Y

2017-06-09

At present, three-dimensional (3D) printing has been applied in many aspects in the field of prosthodontics, such as dental models, wax patterns, guide plates, dental restoration and customized implants. The common forming principles include light curing, sintering and melting-condensation, the materials include pure wax, resin, metal and ceramics. However, the printing precision and the strength of multi-material integrated forming, remains to be improved. In addition, as a technology by which the internal structure of a material can be customized manufacturing, further advantage of 3D printing used in the manufacture of dental restoration lies in the customization functional bionic micro-structures, but the related research is still in its infancy. The review briefly summarizes the commonly used 3D printing crafts in prosthetic dentistry, and details clinical applications and evaluations, provides references for clinical decision and further research.

Challenges in engineering large customized bone constructs.

PubMed

Forrestal, David P; Klein, Travis J; Woodruff, Maria A

2017-06-01

The ability to treat large tissue defects with customized, patient-specific scaffolds is one of the most exciting applications in the tissue engineering field. While an increasing number of modestly sized tissue engineering solutions are making the transition to clinical use, successfully scaling up to large scaffolds with customized geometry is proving to be a considerable challenge. Managing often conflicting requirements of cell placement, structural integrity, and a hydrodynamic environment supportive of cell culture throughout the entire thickness of the scaffold has driven the continued development of many techniques used in the production, culturing, and characterization of these scaffolds. This review explores a range of technologies and methods relevant to the design and manufacture of large, anatomically accurate tissue-engineered scaffolds with a focus on the interaction of manufactured scaffolds with the dynamic tissue culture fluid environment. Biotechnol. Bioeng. 2017;114: 1129-1139. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

PubMed

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

How to unlock the benefits of MRP (materiel requirements planning) II and Just-in-Time.

PubMed

Jacobi, M A

1994-05-01

Manufacturing companies need to use the best and most applicable parts of MRP II and JIT to run their businesses effectively. MRP II provides the methodology to plan and control the total resources of the company and focuses on the processes that add value to their customers' products. It is the cornerstone of total quality management, as it reduces the variability and costly activities in the communication and subsequent execution of the required steps from customer order to shipment. JIT focuses on simplifying the total business operation and execution of business processes. MRP II and JIT are the foundations for successful manufacturing businesses.

78 FR 775 - Weather Shield Manufacturing, Inc., Corporate Office, Medford, WI; Notice of Negative...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

... the subject firm nor its customers increased import purchases of either doors or windows (or like or... worker group covered by petition TA-W-72,673 was impacted by the same import competition as the worker... further investigation and apply the same methodology for administering customer surveys and determining...

76 FR 70957 - Foreign-Trade Zone 277-Western Maricopa County, AZ; Application for Manufacturing Authority, Sub...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

..., and wine storage units for export and the domestic market. Components and materials sourced from... entry procedures that applies to refrigerators, freezers, and wine storage units (duty rate--free) for... realize logistical benefits through the use of weekly customs entry procedures. Customs duties also could...

Setting new standards for customer advocacy.

PubMed

McDonald, L

1993-01-01

Dell Computer Corporation pioneered the direct marketing of personal computers in 1984 and became the first company in the PC industry to offer manufacturer-direct technical support. According to surveys of corporate buyers, the company provides the best after-sale service and support of any computer maker. Here's how Dell has institutionalized the delivery of customer satisfaction.

VIEW OF MICROMACHINING, HIGH PRECISION EQUIPMENT USED TO CUSTOM MAKE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF MICRO-MACHINING, HIGH PRECISION EQUIPMENT USED TO CUSTOM MAKE SMALL PARTS. LUMPS OF CLAY; SHOWN IN THE PHOTOGRAPH, WERE USED TO STABILIZE PARTS BEING MACHINED. (11/1/87) - Rocky Flats Plant, Stainless Steel & Non-Nuclear Components Manufacturing, Southeast corner of intersection of Cottonwood & Third Avenues, Golden, Jefferson County, CO

Design and milling manufacture of polyurethane custom contoured cushions for wheelchair users.

PubMed

da Silva, Fabio Pinto; Beretta, Elisa Marangon; Prestes, Rafael Cavalli; Kindlein Junior, Wilson

2011-01-01

The design of custom contoured cushions manufactured in flexible polyurethane foams is an option to improve positioning and comfort for people with disabilities that spend most of the day seated in the same position. These surfaces increase the contact area between the seat and the user. This fact contributes to minimise the local pressures that can generate problems like decubitus ulcers. The present research aims at establishing development routes for custom cushion production to wheelchair users. This study also contributes to the investigation of Computer Numerical Control (CNC) machining of flexible polyurethane foams. The proposed route to obtain the customised seat began with acquiring the user's contour in adequate posture through plaster cast. To collect the surface geometry, the cast was three-dimensionally scanned and manipulated in CAD/CAM software. CNC milling parameters such as tools, spindle speeds and feed rates to machine flexible polyurethane foams were tested. These parameters were analysed regarding the surface quality. The best parameters were then tested in a customised seat. The possible dimensional changes generated during foam cutting were analysed through 3D scanning. Also, the customised seat pressure and temperature distribution was tested. The best parameters found for foams with a density of 50kg/cm(3) were high spindle speeds (24000 rpm) and feed rates between 2400-4000mm/min. Those parameters did not generate significant deformities in the machined cushions. The custom contoured cushion satisfactorily increased the contact area between wheelchair and user, as it distributed pressure and heat evenly. Through this study it was possible to define routes for the development and manufacturing of customised seats using direct CNC milling in flexible polyurethane foams. It also showed that custom contoured cushions efficiently distribute pressure and temperature, which is believed to minimise tissue lesions such as pressure ulcers.

19 CFR 19.14 - Materials for use in manufacturing warehouse.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY CUSTOMS WAREHOUSES, CONTAINER STATIONS AND CONTROL OF MERCHANDISE THEREIN... statistical information as provided in § 141.61(e) of this chapter. If the merchandise has been imported or... report this information for each warehouse entry represented in the manufacturing process. [28 FR 14763...

2006 Land and Maritime Supply Chains Business Conference and Exhibition

DTIC Science & Technology

2006-08-30

404 Patterson Fan Company.................................602 PDA, LLC........................................................303...210 TW Design & Manufacturing...........................616 Vermont Aerospace Manufacturing.................402 WW Williams ... William M. Lenaers, USA Commanding General, US Army TACOM “What Your Largest Customer Thinks” 1:55pm - Remarks 2:15pm Rear Admiral Charlie M. Lilli

76 FR 46269 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-02

... novel, simple to use automation and process monitoring products for industrial customers. Methods.... Nursery Supplies, Inc........ 1415 Orchard Drive, 26-Jul-11 The firm manufactures plastic containers... containers. Technautic International, 141 Robert E. Lee 22-Jul-11 The firm manufactures automated dissolved...

The complexities of discussing soil vapor extraction techniques with non-scientists

USDA-ARS?s Scientific Manuscript database

The Centre County Kepone Site is approximately 32.2 acres on which a chemical manufacturing plant and a portion of the Spring Creek watershed are located. Kepone and mirex, were custom manufactured between 1959 and 1974. Earthen lagoons were used to manage onsite waste disposal. Concrete lagoons w...

78 FR 39340 - Manufacturer of Controlled Substances; Notice of Application; Boehringer Ingelheim Chemicals, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-01

... Methadone Intermediate (9254) II Tapentadol (9780) II The company plans to manufacture the listed controlled substances in bulk for sale to its customers for formulation into finished pharmaceuticals. In reference to Methadone Intermediate (9254) the company plans to produce Methadone HCL active pharmaceutical ingredients...

Department of the Navy Justification of Estimates for Fiscal Years 1988 and 1989 Submitted to Congress January 1987. Operation & Maintenance, Navy. Book 2 of 3. Budget Activity 7: Central Supply and Maintenance

DTIC Science & Technology

1987-01-01

training, customer service, small/uneconomilcal lot manufacturing, preservation and depreservation, aircraft salvage and recovery, and support of depot...for the commercial modification programs. 1,260 4) Increase in commercial A/C preservation ,and customer service effort. 69 9. Program Derr.eas~s...3,499 Salvage 703 459 712 845 Acceptance/Transfer 2,587 1,645- 2,376 2,453 Customer /Fleet Training 2,838 2,008 3,058 2,997 Customer Services 17,276

Customer-focused service management: driving change up the hierarchy and outward.

PubMed

Schonberger, R J

1998-02-01

The modern management revolution, which has quality and customer service at its core, is incomplete. The customer mindset is strongest in frontline operations and growing in support functions. Too often, however, the strategic hierarchy has been left out--still taking its marching orders from the skittish, myopic financial community centered in Wall Street, the City of London, and other meccas of money. Superior organizations, largely in manufacturing thus far, are taking steps toward correcting this deficiency. Their approach is to reorient using customer-focused principles that are attractive to all parties, including external partners.

Design of an Orthopedic Product by Using Additive Manufacturing Technology: The Arm Splint.

PubMed

Blaya, Fernando; Pedro, Pilar San; Silva, Julia López; D'Amato, Roberto; Heras, Enrique Soriano; Juanes, Juan Antonio

2018-02-05

The traditional fabrication process of custom-made splints has hardly undergone any progress since the beginning of its use at the end of the eighteenth century. New manufacturing techniques and the new materials can help to modernize this treatment method of fractures. The use of Additive Manufacturing has been proposed in recent years as an alternative process for the manufacture of splints and there has been an increase in public awareness and exploration. For this reason, in this study a splint model printed in 3D, that replaces the deficiencies of the cast maintaining its virtues, has been proposed. The proposed methodology is based on three-dimensional digitalization techniques and 3D modeling with reverse engineering software. The work integrates different scientific disciplines to achieve its main goal: to improve life quality of the patient. In addition, the splint has been designed based on the principles of sustainable development. The design of splint is made of Polycarbonate by technique of Additive Manufacturing with fused deposition manufacturing, and conceived with organic shapes, customizing openings and closing buttons with rubber. In this preliminary study the final result is a prototype of the 3D printed arm splint in a reduced scale by using PLA as material.

Lithographic manufacturing of adaptive optics components

NASA Astrophysics Data System (ADS)

Scott, R. Phillip; Jean, Madison; Johnson, Lee; Gatlin, Ridley; Bronson, Ryan; Milster, Tom; Hart, Michael

2017-09-01

Adaptive optics systems and their laboratory test environments call for a number of unusual optical components. Examples include lenslet arrays, pyramids, and Kolmogorov phase screens. Because of their specialized application, the availability of these parts is generally limited, with high cost and long lead time, which can also significantly drive optical system design. These concerns can be alleviated by a fast and inexpensive method of optical fabrication. To that end, we are exploring direct-write lithographic techniques to manufacture three different custom elements. We report results from a number of prototype devices including 1, 2, and 3 wave Multiple Order Diffractive (MOD) lenslet arrays with 0.75 mm pitch and phase screens with near Kolmogorov structure functions with a Fried length r0 around 1 mm. We also discuss plans to expand our research to include a diffractive pyramid that is smaller, lighter, and more easily manufactured than glass versions presently used in pyramid wavefront sensors. We describe how these components can be produced within the limited dynamic range of the lithographic process, and with a rapid prototyping and manufacturing cycle. We discuss exploratory manufacturing methods, including replication, and potential observing techniques enabled by the ready availability of custom components.

[2011 Shanghai customer satisfaction report of DSA/X-ray equipment's after-service].

PubMed

Li, Bin; Qian, Jianguo; Cao, Shaoping; Zheng, Yunxin; Xu, Zitian; Wang, Lijun

2012-11-01

To improve the manufacturer's medical equipment after-sale service, the fifth Shanghai zone customer satisfaction survey was launched by the end of 2011. The DSA/X-ray equipment was setup as an independent category for the first time. From the survey we can show that the DSA/X-ray equipment's CSI is higher than last year, the customer satisfaction scores of preventive maintenance and service contract are lower than others, and CSI of local brand is lower than imported brand.

Annual Expeditionary Warfare Conference (22nd)

DTIC Science & Technology

2017-10-24

for many copies of data and a unique software stack to operate on it. PSI designs and manufactures shipping and carrying cases as well as providing...An ISO 9001:2008 rated company, Trijicon Inc., is committed to Customer Satisfaction through the design , development, and manufacture of superior...their endeavors to continue as a world leader in the design and manufacture of high quality, innovative sighting systems. TABLE TOP dISPLAyErS 12 LtGen

Biofabrication of customized bone grafts by combination of additive manufacturing and bioreactor knowhow.

PubMed

Costa, Pedro F; Vaquette, Cédryck; Baldwin, Jeremy; Chhaya, Mohit; Gomes, Manuela E; Reis, Rui L; Theodoropoulos, Christina; Hutmacher, Dietmar W

2014-09-01

This study reports on an original concept of additive manufacturing for the fabrication of tissue engineered constructs (TEC), offering the possibility of concomitantly manufacturing a customized scaffold and a bioreactor chamber to any size and shape. As a proof of concept towards the development of anatomically relevant TECs, this concept was utilized for the design and fabrication of a highly porous sheep tibia scaffold around which a bioreactor chamber of similar shape was simultaneously built. The morphology of the bioreactor/scaffold device was investigated by micro-computed tomography and scanning electron microscopy confirming the porous architecture of the sheep tibiae as opposed to the non-porous nature of the bioreactor chamber. Additionally, this study demonstrates that both the shape, as well as the inner architecture of the device can significantly impact the perfusion of fluid within the scaffold architecture. Indeed, fluid flow modelling revealed that this was of significant importance for controlling the nutrition flow pattern within the scaffold and the bioreactor chamber, avoiding the formation of stagnant flow regions detrimental for in vitro tissue development. The bioreactor/scaffold device was dynamically seeded with human primary osteoblasts and cultured under bi-directional perfusion for two and six weeks. Primary human osteoblasts were observed homogenously distributed throughout the scaffold, and were viable for the six week culture period. This work demonstrates a novel application for additive manufacturing in the development of scaffolds and bioreactors. Given the intrinsic flexibility of the additive manufacturing technology platform developed, more complex culture systems can be fabricated which would contribute to the advances in customized and patient-specific tissue engineering strategies for a wide range of applications.

75 FR 58363 - Notice of Petitions by Firms for Determination of Eligibility to Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

..., Inc 6550 Wedgwood Road, 09/13/10 The firm manufactures Maple Grove, MN 55311- electronic integrated.... Genplex, Inc 7 Industrial Park Road, 09/14/10 The firm manufactures Skowhegan, ME 04976. extruded plastic... and decorated apparel utilizing custom industrial sewing, RF welding, embroidery and silk screen...

Product costing guide for wood dimension and component manufacturers

Treesearch

Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K. Wiedenbeck; Steve Lawser

2014-01-01

The North American hardwood dimension and components industry plays a critical role in the hardwood forest products industry as the industry is a user of high-value hardwood lumber. Customer expectations, global markets, and international competition, however, require hardwood dimension and components manufacturers to continuously improve their ability to manage their...

76 FR 77817 - Agency Information Collection Activities; Proposed Renewal of Several Currently Approved...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... manufacturing). Abstract: The Customs and Border Protection (CBP) regulations at 19 CFR 12.112 require that an... agricultural and chemical manufacturing). Abstract: This ICR renewal will allow EPA to collect necessary data... Federal Food, Drug, and Cosmetic Act (FFDCA), as amended by the Food Quality Protection Act (FQPA) of...

A new three-dimensional manufacturing service composition method under various structures using improved Flower Pollination Algorithm

NASA Astrophysics Data System (ADS)

Zhang, Wenyu; Yang, Yushu; Zhang, Shuai; Yu, Dejian; Chen, Yong

2018-05-01

With the growing complexity of customer requirements and the increasing scale of manufacturing services, how to select and combine the single services to meet the complex demand of the customer has become a growing concern. This paper presents a new manufacturing service composition method to solve the multi-objective optimization problem based on quality of service (QoS). The proposed model not only presents different methods for calculating the transportation time and transportation cost under various structures but also solves the three-dimensional composition optimization problem, including service aggregation, service selection, and service scheduling simultaneously. Further, an improved Flower Pollination Algorithm (IFPA) is proposed to solve the three-dimensional composition optimization problem using a matrix-based representation scheme. The mutation operator and crossover operator of the Differential Evolution (DE) algorithm are also used to extend the basic Flower Pollination Algorithm (FPA) to improve its performance. Compared to Genetic Algorithm, DE, and basic FPA, the experimental results confirm that the proposed method demonstrates superior performance than other meta heuristic algorithms and can obtain better manufacturing service composition solutions.

Mechanical stability of custom-made implants: Numerical study of anatomical device and low elastic Young's modulus alloy.

PubMed

Didier, P; Piotrowski, B; Fischer, M; Laheurte, P

2017-05-01

The advent of new manufacturing technologies such as additive manufacturing deeply impacts the approach for the design of medical devices. It is now possible to design custom-made implants based on medical imaging, with complex anatomic shape, and to manufacture them. In this study, two geometrical configurations of implant devices are studied, standard and anatomical. The comparison highlights the drawbacks of the standard configuration, which requires specific forming by plastic strain in order to be adapted to the patient's morphology and induces stress field in bones without mechanical load in the implant. The influence of low elastic modulus of the materials on stress distribution is investigated. Two biocompatible alloys having the ability to be used with SLM additive manufacturing are considered, commercial Ti-6Al-4V and Ti-26Nb. It is shown that beyond the geometrical aspect, mechanical compatibility between implants and bones can be significantly improved with the modulus of Ti-26Nb implants compared with the Ti-6Al-4V. Copyright © 2016 Elsevier B.V. All rights reserved.

Public health concerns for anti-obesity medicines imported for personal use through the internet: a cross-sectional study

PubMed Central

Tanimoto, Tsuyoshi; Nakanishi, Yoko; Yoshida, Naoko; Tsuboi, Hirohito; Kimura, Kazuko

2012-01-01

Objective To explore the circulation of anti-obesity medicines via the internet and their quality. Design Cross-sectional study. Setting Internet pharmacies and pharmaceutical suppliers accessible from Japan. Participants Anti-obesity medicines were purchased using relevant keywords on Japanese Google search engine. Blogs and advertisement-only sites were excluded. Primary and secondary outcome measures The authenticity of the samples was investigated in collaboration with the manufacturers of the samples and medicine regulatory authorities. Quality of the samples was assessed by pharmacopoeial analyses using high-performance liquid chromatography. Results 82 samples were purchased from 36 internet sites. Approximately half of the sites did not mention a physical address, and 45% of the samples did not contain a package insert. A variety of custom declarations were made for the shipments of the samples: personal health items, supplement, medicines, general merchandise, tea and others. Among 82 samples, 52 samples were analysed to check their pharmacopoeial quality. Authenticity responses were received from only five of 20 manufacturing companies. According to the pharmacopoeial analyses and authenticity investigation, three of the samples were identified as counterfeits and did not contain any active ingredients. Two of these samples were confirmed as counterfeits by the manufacturer of the authentic products. The manufacturer of the other sample did not respond to our request for an authenticity check even after several communication attempts. These counterfeit cases have been reported at the rapid alert system of Western Pacific Region of the WHO. Conclusions Many counterfeit and unapproved anti-obesity medicines may be easily bypassing regulatory checks during shipping and are widely circulated through the internet. Regulatory authorities should take measures to prevent these medicines from entering countries to safeguard their citizens. PMID:22581794

Certification standards transfer: from committee to laboratory.

PubMed

Lehmann, H P

1998-12-01

The ISO 9000 Standards series were developed to provide the international manufacturing industry with a framework to ensure purchased products meet quality criteria. Section 4 of ISO 9001, Quality System Model for Quality Assurance in Design, Development, Production, Installation and Servicing, contains 20 aspects of a quality system that must be addressed by an organization in order to receive ISO 9001 certification. This concept is extended to the clinical laboratory, where a quality system program establishes for the customer (patient/clinician) that the purchased product (requested information on a submitted specimen-test result) meets established quality norms. In order to satisfy the customer, the providing organization must have policies and procedures in place that ensure a quality product, and be certified. To become certified the organization must, through an inspection process, demonstrate to an independent accrediting agency that it meets defined standards. In the United States, the government through the Clinical Laboratory Improvement Amendment (CLIA) 1988 established quality standards for the clinical laboratory. The College of American Pathologists (CAP), through its Laboratory Accreditation Program (LAP), serves as an independent agency that certifies that laboratories meet standards. To demonstrate the applicability of an established clinical laboratory accreditation program to ISO 9001 certification, the standards and checklists of CLIA 1988 and the CAP LAP will be examined to determine their conformance to ISO 9001, Section 4.

The impact of customer focus on program participation rates in the Virginia WIC Program (Special Supplemental Nutrition Program for Women, Infants, and Children).

PubMed

Chance, K G; Green, C G

2001-01-01

It has been shown in the for-profit sector (business, service, and manufacturing) that the success of an organization depends on its ability to satisfy customer requirements while eliminating waste and reducing costs. The purpose of this article was to examine the impact of current practices in customer focus on program participation rates in the Virginia WIC Program. The results of this study showed that the use of customer-focused strategies was correlated to program participation rates in the WIC Program. The mean data showed that teamwork and accessibility were at unsatisfactory levels in Virginia.

DSHEA's third-party literature exemption; mail order sales, direct marketing, and Internet use.

PubMed

Raubicheck, C J

1999-01-01

This article examines ways in which marketers of dietary supplements can make use of the "third-party literature" section of the Dietary Supplement Health and Education Act of 1994 (DSHEA). This provision permits persons or entities, other than manufacturers or distributors, to distribute to consumers certain publications in connection with the sale of particular supplements. These publications may include statements about the therapeutic benefits of such products without subjecting the products to regulation by the Food and Drug Administration (FDA) as unapproved new drugs. Specifically, this article addresses the following: Can a dietary supplement manufacturer or distributor send third-party literature about a dietary supplement to a customer in a mail order sales transaction? Can third-party literature be disseminated by mail with dietary supplement catalogues only? Can third-party literature be disseminated by sales representatives engaged in direct marketing of dietary supplements? Can third-party literature appear on the Internet? The answer appears to be affirmative in each of these situations.

Advanced engineering tools for design and fabrication of a custom nasal prosthesis

NASA Astrophysics Data System (ADS)

Oliveira, Inês; Leal, Nuno; Silva, Pedro; da Costa Ferreira, A.; Neto, Rui J.; Lino, F. Jorge; Reis, Ana

2012-09-01

Unexpected external defects resulting from neoplasms, burns, congenital malformations, trauma or other diseases, particularly when involving partial or total loss of an external organ, can be emotionally devastating. These defects can be restored with prosthesis, obtained by different techniques, materials and methods. The increase of patient numbers and cost constraints lead to the need of exploring new techniques that can increase efficiency. The main goal of this project was to develop a full engineering-based manufacturing process to obtain soft-tissue prosthesis that could provide faster and less expensive options in the manufacturing of customized prosthesis, and at the same time being able to reproduce the highest degree of details, with the maximum comfort for the patient. Design/methodology/approach - This case report describes treatment using silicone prosthesis with an anatomic retention for an 80-years-old woman with a rhinectomy. The proposed methodology integrates non-contact structured light scanning, CT and reverse engineering with CAD/CAM and additive manufacturing technology. Findings - The proposed protocol showed encouraging results since reveals being a better solution for fabricating custom-made facial prostheses for asymmetrical organs than conventional approaches. The process allows the attainment of prosthesis with the minimum contact and discomfort for the patient, disclosing excellent results in terms of aesthetic, prosthesis retention and in terms of time and resources consumed.

Manufacturers and distributors in the U.S. hardwood lumber supply chain: Perceptions of industry trends

Treesearch

Omar Espinoza; Urs Buehlmann; Matthew Bumgardner; Bob Smith

2011-01-01

Global competition, a slowing housing market, and shifts in the customer base have contributed to reduced demand for hardwood lumber and have increased the need for specialized services by suppliers of hardwood lumber such as sawmills or distributors. Customers of hardwood lumber suppliers also have started initiatives to reduce internal costs dramatically, frequently...

Supplier management by teams.

PubMed

Bueler, D

1999-08-01

Watlow Electric Manufacturing, Hannibal, Missouri, uses a fully integrated MRP system with three-way match accounting. We have approximately 8,000 purchased parts and purchase in excess of $5 million of raw material annually. The vast majority of parts are custom to the heating element industry; the balance of the parts are customer specific. Production is similar to a glorified job-shop, more specialized than standard products.

Supply-chain management: exceeding the customer's expectations.

PubMed

Ramsay, B

2000-10-01

Driven by increasing competition, manufacturers are desperate to cut costs and are looking for increased efficiency and customer service from their supply chains. E-commerce offers a new model of supply and demand, but many companies do not have the processes in place to support this new model. By implementing the techniques discussed here they can achieve substantial improvements in performance.

Opportunities and challenges for 3D printing of solid-state lighting systems

NASA Astrophysics Data System (ADS)

Narendran, Nadarajah; Perera, Indika U.; Mou, Xi; Thotagamuwa, Dinusha R.

2017-09-01

Low energy use and reduced maintenance have made the LED, a solid-state light (SSL) source, the preferred technology for many lighting applications. With the explosion of products in the marketplace and subsequent price erosion, manufacturers are looking for lower cost materials and manufacturing methods. 3-D printing, also known as additive manufacturing, could be a potential solution. Recently, manufacturers in the automotive, aerospace, and medical industries have embraced 3-D printing for manufacturing parts and systems. This could pave the way for the lighting industry to produce lower cost, custom lighting systems that are 3-D printed on-site to achieve on-time and on-demand manufacturing. One unique aspect of LED fixture manufacturing is that it requires thermo-mechanical, electrical, and optical components. The goal of our investigation was to understand if current 3-D printing technologies and materials can be used to manufacture functional thermo-mechanical, electrical, and optical components for SSL fixtures. We printed heat sink components and electrical traces using an FFF-type 3-D printer with different filaments. The results showed that the printed heat sinks achieved higher thermal conductivity values compared to components made with plastic materials. For electrical traces, graphene-infused PLA showed low resistivity but it is much higher than bulk copper resistivity. For optics, SLA-printed optical components showed that print resolution, print orientation, and postprocessing affect light transmission and light scatter properties. Overall, 3-D printing offers an opportunity for mass customization of SSL fixtures and changing architectural lighting practice, but several challenges in terms of process and materials still have to be overcome.

77 FR 12007 - Notice of Petitions by Firms tor Determination of Eligibility to Apply For Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

.../2011 through 02/21/2012] Date accepted for Firm name Address investigation Products Cuisine Holdings Unlimited, 1997 Surgi Dr., 12/29/2011 The firm manufactures food for human LLC.. Mandeville, LA consumption. 70448. Custom Service Printer, lnc.. 916 E. Keating 2/8/2012 The firm manufactures printed products...

Workplace Literacy: The Effects of an In-house Program on the Organization.

ERIC Educational Resources Information Center

Fretz, Barbara

The effects of an in-house workplace literacy program on an organization are examined. A small Canadian manufacturing plant that began a workplace literacy program called Learning in the Workplace in 1990 was the site of this case study research. The plant was CCL Custom Manufacturing, which specialized in household powder-based products. Four…

16 CFR 303.33 - Country where textile fiber products are processed or manufactured.

Code of Federal Regulations, 2013 CFR

2013-01-01

... [Foreign Country]”. (ii) When the U.S. Customs Service requires an origin label on the unfinished product... manufacturer needs to consider the origin of only those materials that are covered under the Act and that are... species of product. Variant spellings which clearly indicate the English name of the country, such as...

16 CFR 303.33 - Country where textile fiber products are processed or manufactured.

Code of Federal Regulations, 2014 CFR

2014-01-01

... [Foreign Country]”. (ii) When the U.S. Customs Service requires an origin label on the unfinished product... manufacturer needs to consider the origin of only those materials that are covered under the Act and that are... species of product. Variant spellings which clearly indicate the English name of the country, such as...

16 CFR 303.33 - Country where textile fiber products are processed or manufactured.

Code of Federal Regulations, 2012 CFR

2012-01-01

... [Foreign Country]”. (ii) When the U.S. Customs Service requires an origin label on the unfinished product... manufacturer needs to consider the origin of only those materials that are covered under the Act and that are... species of product. Variant spellings which clearly indicate the English name of the country, such as...

77 FR 14000 - Foreign-Trade Zone 126-Reno, NV; Application for Temporary/Interim Manufacturing Authority...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-08

..., NV; Application for Temporary/ Interim Manufacturing Authority, Brightpoint North America L.P. (Cell... to produce cell phone kits (HTSUS 8517.12, 8517.69, duty free). Foreign components that would be used... customs entry procedures that apply to cell phone kits (duty free) for the foreign inputs noted above. In...

19 CFR 19.15 - Withdrawal for exportation of articles manufactured in bond; waste or byproducts for consumption.

Code of Federal Regulations, 2010 CFR

2010-04-01

... direct exportation, unless an authorization of the manufacturer is endorsed on the face of the withdrawal... be required as in the case of other warehouse withdrawals for exportation. (l) When the fact of... 19 Customs Duties 1 2010-04-01 2010-04-01 false Withdrawal for exportation of articles...

19 CFR 191.26 - Recordkeeping for manufacturing drawback.

Code of Federal Regulations, 2012 CFR

2012-04-01

... producer under 19 U.S.C. 1313(a) shall keep records to allow the verifying Customs official to trace all... or producer of articles manufactured or produced in accordance with 19 U.S.C. 1313(b) shall establish... drawback claim under 19 U.S.C. 1313(b). The amount of titanium dioxide in the synthetic rutile is...

19 CFR 191.26 - Recordkeeping for manufacturing drawback.

Code of Federal Regulations, 2011 CFR

2011-04-01

... producer under 19 U.S.C. 1313(a) shall keep records to allow the verifying Customs official to trace all... or producer of articles manufactured or produced in accordance with 19 U.S.C. 1313(b) shall establish... drawback claim under 19 U.S.C. 1313(b). The amount of titanium dioxide in the synthetic rutile is...

19 CFR 191.26 - Recordkeeping for manufacturing drawback.

Code of Federal Regulations, 2013 CFR

2013-04-01

... producer under 19 U.S.C. 1313(a) shall keep records to allow the verifying Customs official to trace all... or producer of articles manufactured or produced in accordance with 19 U.S.C. 1313(b) shall establish... drawback claim under 19 U.S.C. 1313(b). The amount of titanium dioxide in the synthetic rutile is...

19 CFR 191.176 - Procedures for claims filed under 19 U.S.C. 1313(p).

Code of Federal Regulations, 2010 CFR

2010-04-01

... SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Substitution of Finished Petroleum Derivatives... subpart. (c) Imported duty-paid derivatives (no manufacture). When the basis for drawback under 19 U.S.C... available for verification by Customs. (d) Derivatives manufactured under 19 U.S.C. 1313(a) or (b). When the...

Post-purchase reassessment and improvement of neuroendoscope holder: importance of physician-manufacturer communication.

PubMed

Ogawa, Yoshikazu; Nakata, Yusuke; Tominaga, Teiji

2014-01-01

Modern medical management requires constant quality improvement of the various instruments used for surgical procedures. Higher quality, less complicated handling, and reduced maintenance are all desirable qualities. However, any improvements in instrumentation require that surgeons must clearly understand the application of the device by adherence to the manufacturer's instructions. The weakness of this one-way information flow depends on the low interest among medical personnel for post-purchase reassessment. Service industries have research departments to investigate the post-purchase behavior of customers, and service recovery is considered essential to retain customers after service failure. All service providers can suffer service failures, and even the best providers may make errors in delivering service. Such an approach has been increasingly adopted in the risk management at medical institutions. We report our clinical trials of the post-purchase reassessment and product improvement of surgical instrumentation. Medical personnel reassessed the use of a newly developed endoscope holder based on the manufacturer's manual and made recommendations for possible improvements, which were examined by the manufacturer. Simple but important improvement was achieved for reducing the instability and uncertainty of instrument fixation. This bi-directional post-purchase communication between medical personnel and manufacturers can improve risk management in medical institutions.

Going Large or Going Small in Plant Design: Comparison between a P.P. with three small Kaplan turbines and a P.P. with just one Large Kaplan turbine

NASA Astrophysics Data System (ADS)

Castro-Otero, C.

2017-04-01

Very often small turbine manufacturers are requested to produce sizeable turbines, too large in terms of physical dimensions, power or designing capacity. In these cases clever alternative solutions should be found to meet customers’ needs. For instance: in the old times twin runner Francis turbines were an option instead of one large machine, or if a too large Pelton turbine cannot be manufactured or designed, a good option is to install a medium size Francis and a small Pelton. Likewise, a similar approach needs to be taken should the manufacturer be asked for a too large Kaplan. Facing this situation a good option is to install three or more small Kaplan turbines. This particular case was studied in depth and after all the considerations had been made, the following question arouse: Is this a way out for the manufacturer or is it really the best option for the customer? The choice made as a way out for the manufacturer became the best option for the customer and a success for both parties. This paper aims to encourage developers and engineering firms to search for more options than the traditional one to find the best option in plant design.

Analysis on critical success factors for agile manufacturing evaluation in original equipment manufacturing industry-an AHP approach

NASA Astrophysics Data System (ADS)

Ajay Guru Dev, C.; Senthil Kumar, V. S.

2016-09-01

Manufacturing industries are facing challenges in the implementation of agile manufacturing in their products and processes. Agility is widely accepted as a new competitive concept in the manufacturing sector in fulfilling varying customer demand. Thus, evaluation of agile manufacturing in industries has become a necessity. The success of an organisation depends on its ability to manage finding the critical success factors and give them special and continued attention in order to bring about high performance. This paper proposes a set of critical success factors (CSFs) for evaluating agile manufacturing considered appropriate for the manufacturing sector. The analytical hierarchy process (AHP) method is applied for prioritizing the success factors, by summarizing the opinions of experts. It is believed that the proposed CSFs enable and assist manufacturing industries to achieve a higher performance in agile manufacturing so as to increase competitiveness.

15 CFR 291.2 - Environmental integration projects.

Code of Federal Regulations, 2010 CFR

2010-01-01

... activity, and “customer satisfaction” measures of performance. (5) Management experience and plans... defined. The manufacturing center must demonstrate that it understands the populations environmentally...

Improving competitiveness through performance-measurement systems.

PubMed

Stewart, L J; Lockamy, A

2001-12-01

Parallels exist between the competitive pressures felt by U.S. manufacturers over the past 30 years and those experienced by healthcare providers today. Increasing market deregulation, changing government policies, and growing consumerism have altered the healthcare arena. Responding to similar pressures, manufacturers adopted a strategic orientation driven by customer needs and expectations that led them to achieve high performance levels and surpass their competition. The adoption of integrated performance-measurement systems was instrumental in these firms' success. An integrated performance-measurement model for healthcare organizations can help to blend the organization's strategy with the demands of the contemporary healthcare environment. Performance-measurement systems encourage healthcare organizations to focus on their mission and vision by aligning their strategic objectives and resource-allocation decisions with customer requirements.

Dual-scan technique for the customization of zirconia computer-aided design/computer-aided manufacturing frameworks.

PubMed

Andreiuolo, Rafael Ferrone; Sabrosa, Carlos Eduardo; Dias, Katia Regina H Cervantes

2013-09-01

The use of bi-layered all-ceramic crowns has continuously grown since the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia cores. Unfortunately, despite the outstanding mechanical properties of zirconia, problems related to porcelain cracking or chipping remain. One of the reasons for this is that ceramic copings are usually milled to uniform thicknesses of 0.3-0.6 mm around the whole tooth preparation. This may not provide uniform thickness or appropriate support for the veneering porcelain. To prevent these problems, the dual-scan technique demonstrates an alternative that allows the restorative team to customize zirconia CAD/CAM frameworks with adequate porcelain thickness and support in a simple manner.

Custom avionics-grade AM LCDs for high performance military and avionics applications

NASA Astrophysics Data System (ADS)

Niemczyk, James

2003-09-01

American Panel Corporation in Alpharetta Georgia and LG-Philips-LCD in Seoul South Korea have a strategic alliance for the design and manufacture of custom AMLCD products targeted for the military vehicle and avionics sector. As part of this relationship, new innovations in AMLCD technology specifically aimed at the rugged and avionics applications have been developed and are now brought to the marketplace

7 CFR 1755.500 - RUS standard for service installations at customers access locations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false RUS standard for service installations at customers... customers access locations. (a) Sections 1755.501 through 1755.510 cover service installations at permanent or mobile home customer access locations. Sections 1755.501 through 1755.510 do not cover service...

Simulation Design for Off-Line Training of Practical Lean Manufacturing Concepts for Visual Inspection

ERIC Educational Resources Information Center

Tetteh, Edem; McWilliams, Douglas

2010-01-01

Customer needs for high-quality goods and the risk of product-liability litigation against businesses have made companies look for a way to sustain quality assurance in their products and services. Lean manufacturing is the latest and most successful system being used by companies to turn their business around. Visual inspection plays an important…

Automotive Lithium-ion Battery Supply Chain and U.S. Competitiveness Considerations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung, Donald; Elgqvist, Emma; Santhanagopalan, Shriram

2015-06-01

This study highlights the U.S. foothold in automotive lithium-ion battery (LIB) production, globally. U.S.-based manufacturers comprise 17% of global production capacity. With increasing demand for electric and hybrid electric vehicles and U.S. vehicle manufacturers' proximity to customers, there is a growing opportunity for the United States to compete globally in the automotive LIB market.

Three phase power conversion system for utility interconnected PV applications

NASA Astrophysics Data System (ADS)

Porter, David G.

1999-03-01

Omnion Power Engineering Corporation has developed a new three phase inverter that improves the cost, reliability, and performance of three phase utility interconnected photovoltaic inverters. The inverter uses a new, high manufacturing volume IGBT bridge that has better thermal performance than previous designs. A custom easily manufactured enclosure was designed. Controls were simplified to increase reliability while maintaining important user features.

Network-based production quality control

NASA Astrophysics Data System (ADS)

Kwon, Yongjin; Tseng, Bill; Chiou, Richard

2007-09-01

This study investigates the feasibility of remote quality control using a host of advanced automation equipment with Internet accessibility. Recent emphasis on product quality and reduction of waste stems from the dynamic, globalized and customer-driven market, which brings opportunities and threats to companies, depending on the response speed and production strategies. The current trends in industry also include a wide spread of distributed manufacturing systems, where design, production, and management facilities are geographically dispersed. This situation mandates not only the accessibility to remotely located production equipment for monitoring and control, but efficient means of responding to changing environment to counter process variations and diverse customer demands. To compete under such an environment, companies are striving to achieve 100%, sensor-based, automated inspection for zero-defect manufacturing. In this study, the Internet-based quality control scheme is referred to as "E-Quality for Manufacturing" or "EQM" for short. By its definition, EQM refers to a holistic approach to design and to embed efficient quality control functions in the context of network integrated manufacturing systems. Such system let designers located far away from the production facility to monitor, control and adjust the quality inspection processes as production design evolves.

19 CFR 162.73 - Penalties under section 592, Tariff Act of 1930, as amended.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Penalties under section 592, Tariff Act of 1930, as amended. 162.73 Section 162.73 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Special...

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roy Scandrol

2003-04-01

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregatesmore » that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create eight (8) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry flue gas desulfurization (FGD) technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.« less

COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roy Scandrol

2003-10-01

Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregatesmore » that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create nine (9) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry FGD technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.« less

Using computed tomography and 3D printing to construct custom prosthetics attachments and devices.

PubMed

Liacouras, Peter C; Sahajwalla, Divya; Beachler, Mark D; Sleeman, Todd; Ho, Vincent B; Lichtenberger, John P

2017-01-01

The prosthetic devices the military uses to restore function and mobility to our wounded warriors are highly advanced, and in many instances not publically available. There is considerable research aimed at this population of young patients who are extremely active and desire to take part in numerous complex activities. While prosthetists design and manufacture numerous devices with standard materials and limb assemblies, patients often require individualized prosthetic design and/or modifications to enable them to participate fully in complex activities. Prosthetists and engineers perform research and implement digitally designs in collaboration to generate equipment for their patient's rehabilitation needs. 3D printing allows for these devices to be manufactured from an array of materials ranging from plastic to titanium alloy. Many designs require form fitting to a prosthetic socket or a complex surface geometry. Specialty items can be scanned using computed tomography and digitally reconstructed to produce a virtual 3D model the engineer can use to design the necessary features of the desired prosthetic, device, or attachment. Completed devices are tested for fit and function. Numerous custom prostheses and attachments have been successfully translated from the research domain to clinical reality, in particular, those that feature the use of computed tomography (CT) reconstructions. The purpose of this project is to describe the research pathways to implementation for the following clinical designs: sets of bilateral hockey skates; custom weightlifting prosthetic hands; and a wine glass holder. This article will demonstrate how to incorporate CT imaging and 3D printing in the design and manufacturing process of custom attachments and assistive technology devices. Even though some of these prosthesis attachments may be relatively simple in design to an engineer, they have an enormous impact on the lives of our wounded warriors.

Impact of the Global Food Safety Initiative on Food Safety Worldwide: Statistical Analysis of a Survey of International Food Processors.

PubMed

Crandall, Philip G; Mauromoustakos, Andy; O'Bryan, Corliss A; Thompson, Kevin C; Yiannas, Frank; Bridges, Kerry; Francois, Catherine

2017-10-01

In 2000, the Consumer Goods Forum established the Global Food Safety Initiative (GFSI) to increase the safety of the world's food supply and to harmonize food safety regulations worldwide. In 2013, a university research team in conjunction with Diversey Consulting (Sealed Air), the Consumer Goods Forum, and officers of GFSI solicited input from more than 15,000 GFSI-certified food producers worldwide to determine whether GFSI certification had lived up to these expectations. A total of 828 usable questionnaires were analyzed, representing about 2,300 food manufacturing facilities and food suppliers in 21 countries, mainly across Western Europe, Australia, New Zealand, and North America. Nearly 90% of these certified suppliers perceived GFSI as being beneficial for addressing their food safety concerns, and respondents were eight times more likely to repeat the certification process knowing what it entailed. Nearly three-quarters (74%) of these food manufacturers would choose to go through the certification process again even if certification were not required by one of their current retail customers. Important drivers for becoming GFSI certified included continuing to do business with an existing customer, starting to do business with new customer, reducing the number of third-party food safety audits, and continuing improvement of their food safety program. Although 50% or fewer respondents stated that they saw actual increases in sales, customers, suppliers, or employees, significantly more companies agreed than disagreed that there was an increase in these key performance indicators in the year following GFSI certification. A majority of respondents (81%) agreed that there was a substantial investment in staff time since certification, and 50% agreed there was a significant capital investment. This survey is the largest and most representative of global food manufacturers conducted to date.

19 CFR 103.3 - Publication of information in the Federal Register.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Publication of information in the Federal Register. 103.3 Section 103.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... paragraph (b) of this section, the United States Customs Service is required, by 5 U.S.C. 552(a)(1), to...

19 CFR 103.3 - Publication of information in the Federal Register.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Publication of information in the Federal Register. 103.3 Section 103.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... paragraph (b) of this section, the United States Customs Service is required, by 5 U.S.C. 552(a)(1), to...

19 CFR 103.3 - Publication of information in the Federal Register.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Publication of information in the Federal Register. 103.3 Section 103.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... paragraph (b) of this section, the United States Customs Service is required, by 5 U.S.C. 552(a)(1), to...

19 CFR 103.3 - Publication of information in the Federal Register.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Publication of information in the Federal Register. 103.3 Section 103.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... paragraph (b) of this section, the United States Customs Service is required, by 5 U.S.C. 552(a)(1), to...

19 CFR 103.3 - Publication of information in the Federal Register.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Publication of information in the Federal Register. 103.3 Section 103.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... paragraph (b) of this section, the United States Customs Service is required, by 5 U.S.C. 552(a)(1), to...

Sustainment and Advancement of Amputee Care

DTIC Science & Technology

2015-04-08

fitted with an IDEO TM , the RTR clinical pathway takes 12 weeks to complete. 169 The IDEO TM is a “ custom carbon fiber energy storage and...advances in three-dimensional printing may allow for individualized patient and function-specific customization , as well as rapid manufacturing of...Jay attended college for a year; worked construction for 3 years; worked in a restaurant in Chicago for a year before joining the Navy in 2006

Application of the rapid prototyping technique to design a customized temporomandibular joint used to treat temporomandibular ankylosis

PubMed Central

Chaware, Suresh M.; Bagaria, Vaibhav; Kuthe, Abhay

2009-01-01

Anthropometric variations in humans make it difficult to replace a temporomandibular joint (TMJ), successfully using a standard “one-size-fits-all” prosthesis. The case report presents a unique concept of total TMJ replacement with customized and modified TMJ prosthesis, which is cost-effective and provides the best fit for the patient. The process involved in designing and modifications over the existing prosthesis are also described. A 12-year- old female who presented for treatment of left unilateral TMJ ankylosis underwent the surgery for total TMJ replacement. A three-dimensional computed tomography (CT) scan suggested features of bony ankylosis of left TMJ. CT images were converted to a sterolithographic model using CAD software and a rapid prototyping machine. A process of rapid manufacturing was then used to manufacture the customized prosthesis. Postoperative recovery was uneventful, with an improvement in mouth opening of 3.5 cm and painless jaw movements. Three years postsurgery, the patient is pain-free, has a mouth opening of about 4.0 cm and enjoys a normal diet. The postoperative radiographs concur with the excellent clinical results. The use of CAD/CAM technique to design the custom-made prosthesis, using orthopaedically proven structural materials, significantly improves the predictability and success rates of TMJ replacement surgery. PMID:19881026

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 145.51 - Articles prohibited by section 305, Tariff Act of 1930.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Articles prohibited by section 305, Tariff Act of 1930. 145.51 Section 145.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND...) Obscene matter; (2) Articles for causing unlawful abortion (see § 145.52 for the treatment of literature...

19 CFR 162.73a - Penalties under section 593A, Tariff Act of 1930, as amended.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Penalties under section 593A, Tariff Act of 1930, as amended. 162.73a Section 162.73a Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Special...

An introduction to quality assurance.

PubMed

Riggs, D G

1989-10-01

Although initially applied within the manufacturing sectors of industry the benefits of quality assurance to both specifiers and customers alike are rapidly being realised by all sectors of business and industry.

36 CFR 1193.23 - Product design, development, and evaluation.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., usability, and compatibility of telecommunications equipment and customer premises equipment and shall... as possible. Manufacturers shall identify barriers to accessibility and usability as part of such a...

Design and manufacturing of patient-specific orthodontic appliances by computer-aided engineering techniques.

PubMed

Barone, Sandro; Neri, Paolo; Paoli, Alessandro; Razionale, Armando Viviano

2018-01-01

Orthodontic treatments are usually performed using fixed brackets or removable oral appliances, which are traditionally made from alginate impressions and wax registrations. Among removable devices, eruption guidance appliances are used for early orthodontic treatments in order to intercept and prevent malocclusion problems. Commercially available eruption guidance appliances, however, are symmetric devices produced using a few standard sizes. For this reason, they are not able to meet all the specific patient's needs since the actual dental anatomies present various geometries and asymmetric conditions. In this article, a computer-aided design-based methodology for the design and manufacturing of a patient-specific eruption guidance appliances is presented. The proposed approach is based on the digitalization of several steps of the overall process: from the digital reconstruction of patients' anatomies to the manufacturing of customized appliances. A finite element model has been developed to evaluate the temporomandibular joint disks stress level caused by using symmetric eruption guidance appliances with different teeth misalignment conditions. The developed model can then be used to guide the design of a patient-specific appliance with the aim at reducing the patient discomfort. At this purpose, two different customization levels are proposed in order to face both arches and single tooth misalignment issues. A low-cost manufacturing process, based on an additive manufacturing technique, is finally presented and discussed.

Challenges in teaching modern manufacturing technologies

NASA Astrophysics Data System (ADS)

Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

2015-07-01

Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in executing various projects. Lectures are developed to contain materials featuring advanced manufacturing technologies, R&D trends in manufacturing. Pre- and post-surveys were conducted by an external evaluator to assess the impact of the course on increase in student's knowledge of manufacturing; increase students' preparedness and confidence in effective communication and; increase students' interest in pursuing additional academic studies and/or a career path in manufacturing and high technology. The surveyed data indicate that the students perceived significant gains in manufacturing knowledge and preparedness in effective communication. The study also shows that implementation of a collaborative course within multiple institutions requires a robust and collective communication platform.

Inside Real Innovation

DTIC Science & Technology

2011-11-01

whether it is a purchasing manager , a design engineer or a manufacturing line operator. It is not necessary for the customer at the end of the supply...transactional experiences, which usually involve talking to people. For example, a conversation with a manufacturing manager about whether he is concerned about...Innovations require experimenting with greater uncertainty in Technology, Market and Implementation. The owner cuts her own pay in order to hire a manager

Investment Justification of Robotic Technology in Aerospace Manufacturing. User’s Manual

DTIC Science & Technology

1984-10-01

assessing the economic attractiveness of investments in robotics and/or flexible manufacturing systems (FMS). It models the cash flows...relative. 5. RIDM assesses the inherent economic attractiveness of robotic/FMS implementation. The model is based on real economic events and not...provided for an optional analysis of state and local tax impacts, to be custom designed by the user. (2) Computation of Depreciation

Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery

NASA Astrophysics Data System (ADS)

Harrysson, Ola L. A.; Marcellin-Little, Denis J.; Horn, Timothy J.

2015-03-01

Veterinary medicine has undergone a rapid increase in specialization over the last three decades. Veterinarians now routinely perform joint replacement, neurosurgery, limb-sparing surgery, interventional radiology, radiation therapy, and other complex medical procedures. Many procedures involve advanced imaging and surgical planning. Evidence-based medicine has also become part of the modus operandi of veterinary clinicians. Modeling and additive manufacturing can provide individualized or customized therapeutic solutions to support the management of companion animals with complex medical problems. The use of metal additive manufacturing is increasing in veterinary orthopedic surgery. This review describes and discusses current and potential applications of metal additive manufacturing in veterinary orthopedic surgery.

Economics of automation for the design-to-mask interface

NASA Astrophysics Data System (ADS)

Erck, Wesley

2009-04-01

Mask order automation has increased steadily over the years through a variety of individual mask customer implementations. These have been supported by customer-specific software at the mask suppliers to support the variety of customer output formats. Some customers use the SEMI P10 1 standard, some use supplier-specific formats, and some use customer-specific formats. Some customers use little automation and depend instead on close customer-supplier relationships. Implementations are varied in quality and effectiveness. A major factor which has prolonged the adoption of more advanced and effective solutions has been a lack of understanding of the economic benefits. Some customers think standardized automation mainly benefits the mask supplier in order entry automation, but this ignores a number of other significant benefits which differ dramatically for each party in the supply chain. This paper discusses the nature of those differing advantages and presents simple models suited to four business cases: integrated device manufacturers (IDM), fabless companies, foundries and mask suppliers. Examples and estimates of the financial advantages for these business types will be shown.

An analysis of the field service function of selected electronics firms

NASA Astrophysics Data System (ADS)

Hull, Dennis Lee

For the purposes of this study, field service was defined as the function concerned with the servicing and maintaining, by the manufacturer or supplier, of products (usually owned by customers) used away from the manufacturer's or supplier's site. Field service is an important component of the service sector and of customer service. Field service availability and quality of this service are increasingly being used by customers as a means of product selection. Many companies have recognized this trend and have identified field service as a competitive edge. A review of the field service literature and discussions with field service consultants and professionals indicated a lack of field service research--more specifically, a systems analysis of the area was lacking. The purpose of this research was to examine, utilizing a systems perspective, the field service practices of leading electronics firms in order to develop field service management propositions (empirical generalizations) and a prescriptive model of best practice. The electronics industry was selected due to the critical relation of service-based competition to company profitability.

19 CFR 10.62 - Bunker fuel oil.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Bunker fuel oil. 10.62 Section 10.62 Customs... Equipment for Vessels § 10.62 Bunker fuel oil. (a) Withdrawal under section 309, Tariff Act of 1930, as... section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), when all the bunker fuel oil in a Customs...

19 CFR 10.62 - Bunker fuel oil.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Bunker fuel oil. 10.62 Section 10.62 Customs... Equipment for Vessels § 10.62 Bunker fuel oil. (a) Withdrawal under section 309, Tariff Act of 1930, as... section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), when all the bunker fuel oil in a Customs...

19 CFR 10.62 - Bunker fuel oil.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Bunker fuel oil. 10.62 Section 10.62 Customs... Equipment for Vessels § 10.62 Bunker fuel oil. (a) Withdrawal under section 309, Tariff Act of 1930, as... section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), when all the bunker fuel oil in a Customs...

19 CFR 10.62 - Bunker fuel oil.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Bunker fuel oil. 10.62 Section 10.62 Customs... Equipment for Vessels § 10.62 Bunker fuel oil. (a) Withdrawal under section 309, Tariff Act of 1930, as... section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), when all the bunker fuel oil in a Customs...

19 CFR 10.62 - Bunker fuel oil.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Bunker fuel oil. 10.62 Section 10.62 Customs... Equipment for Vessels § 10.62 Bunker fuel oil. (a) Withdrawal under section 309, Tariff Act of 1930, as... section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), when all the bunker fuel oil in a Customs...

36 CFR § 1193.23 - Product design, development, and evaluation.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., usability, and compatibility of telecommunications equipment and customer premises equipment and shall... as possible. Manufacturers shall identify barriers to accessibility and usability as part of such a...

Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review

NASA Astrophysics Data System (ADS)

Kumbhar, N. N.; Mulay, A. V.

2016-08-01

The Additive Manufacturing (AM) processes open the possibility to go directly from Computer-Aided Design (CAD) to a physical prototype. These prototypes are used as test models before it is finalized as well as sometimes as a final product. Additive Manufacturing has many advantages over the traditional process used to develop a product such as allowing early customer involvement in product development, complex shape generation and also save time as well as money. Additive manufacturing also possess some special challenges that are usually worth overcoming such as Poor Surface quality, Physical Properties and use of specific raw material for manufacturing. To improve the surface quality several attempts had been made by controlling various process parameters of Additive manufacturing and also applying different post processing techniques on components manufactured by Additive manufacturing. The main objective of this work is to document an extensive literature review in the general area of post processing techniques which are used in Additive manufacturing.

Customer Driven Uniform Manufacture (CDUM) Program. Customer Driven Uniform Management Apparel Research

DTIC Science & Technology

2008-11-13

Final Technical Report 4 consumption patterns, and production status. The current version of the AAVS DataMart contains apparel and textile data...which stores the summary of the activity by item; Daily Issues which contains all the issues for the day; Daily Receipts which contains all receipts...entered for the day; and, Open Requisitions which contains all open DSCP Requisitions and Local Purchase Orders. Supply and financial transactions are

USSR Report, Consumer Goods and Domestic Trade, No. 77.

DTIC Science & Technology

1983-10-24

above all to the prices of clothing, knitwear and other products manufactured by consumer service enterprises on custom or- der for individuals. In...light of the fact that filling custom orders is more time- consuming , other things being equal, than large-scale industrial produc- tion of the same...340033 JPRS 84592 24 October 1983 USSR Report CONSUMER GOODS AND DOMESTIC TRADE No. 77 flätöltö FBIS FOREIGN BROADCAST INFORMATION SERVICE

19 CFR 115.38 - Application.

Code of Federal Regulations, 2014 CFR

2014-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.38 Application. A written request for approval of a... inspection of the container. ...

19 CFR 115.38 - Application.

Code of Federal Regulations, 2013 CFR

2013-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.38 Application. A written request for approval of a... inspection of the container. ...

19 CFR 115.38 - Application.

Code of Federal Regulations, 2011 CFR

2011-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.38 Application. A written request for approval of a... inspection of the container. ...

19 CFR 115.38 - Application.

Code of Federal Regulations, 2012 CFR

2012-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.38 Application. A written request for approval of a... inspection of the container. ...

19 CFR 115.38 - Application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers After Manufacture § 115.38 Application. A written request for approval of a... inspection of the container. ...

Integrated methodology for standard-setting norms of innovative product in the new competitive environment

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadiy

2017-07-01

Modern theory of technological and economical development is based on long-term cycles. So far it has been proved that the technological structure of the economy can be subdivided into groups of technological complexes, which are inter-related with each other by similar technological links, so called technological modes. Technological mode is defined as a complex of interrelated production units of similar technological level, which develop simultaneously. In order to provide competitiveness of products in the new changing conditions, it is necessary to make sure that they meet all the regulatory requirements specified in standards. But the existing and the fast changing situation on the merchandise markets causes disbalance between the growing customer requirements and the technological capabilities of the manufacturer. This makes the issue of standardization development even more urgent both from the point of view of establishing the current positions and from the point of view of possible promising development trends in technology. In the paper scientific and engineering principles of developing standardization as a science are described. It is shown that further development of standardization is based on the principles of advanced standardization the main idea of which is to set up the prospective requirements to the innovative product. Modern approaches of advanced standardization are shown in this paper. The complexity of the negotiation procedure between customer and manufacturer as a whole and achieving of consensus, in particular, make it necessary to find conceptually new approaches to developing mathematical models. The developed methodology picture the process of achieving the consensus between customer and manufacturer while developing the standard norms in the form of decreasing S-curve diagram. It means that in the end of the negotiation process, there is no difference between customer and manufacturer positions. It makes it possible to provide the basics of the assessment using the differential equation of the relationship between the rate of change of quality assessment and the distance of the estimated parameter value from the best value to the worst one. The obtained mathematical model can be used in the practice of standardization decreasing time of setting standard norms.

26 CFR 801.4 - Customer satisfaction measures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 20 2010-04-01 2010-04-01 false Customer satisfaction measures. 801.4 Section... REVENUE SERVICE § 801.4 Customer satisfaction measures. The customer satisfaction goals and... may be employed to gather data regarding customer satisfaction. Information to measure customer...

75 FR 53720 - Manufacturer of Controlled Substances; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... Schedule Marihuana (7360) I Tetrahydrocannabinols (7370) I Alphamethadol (9605) I Nabilone (7379) II... controlled substances in bulk for distribution to its customers. In reference to drug code 7360 (Marihuana...

Tools and Strategies for Product Life Cycle Management ñ A Case Study in Foundry

NASA Astrophysics Data System (ADS)

Patil, Rajashekar; Kumar, S. Mohan; Abhilash, E.

2012-08-01

Advances in information and communication technology (ICT) have opened new possibilities of collaborations among the customers, suppliers, manufactures and partners to effectively tackle various business challenges. Product Life Cycle Management(PLM) has been a proven approach for Original Equipment Manufacturers (OEMs) to increase their productivity, improve their product quality, speed up delivery, and increase their profit and to become more efficient. However, their Tier 2 and Tier 3 suppliers like foundry industries are still in their infancy without adopting PLM. Hence to enhance their understanding, the basic concepts, the tools and strategies for PLM are presented is this paper. By selecting and implementing appropriate PLM strategies in a small foundry, an attempt was also made to understand the immediate benefits of using PLM tools (commercial PLM software and digital manufacturing tools). This study indicated a reduction in lead time and improved utilization of organizational resources in the production of automobile impeller. These observations may be further extrapolated to other multiproduct, multi-discipline and multi-customer companies to realize the advantages of using PLM technology

Tapping the Value Potential of Extended Asset Services - Experiences from Finnish Companies

NASA Astrophysics Data System (ADS)

Kortelainen, Helena; Hanski, Jyri; Valkokari, Pasi; Ahonen, Toni

2017-09-01

Recent developments in information technology and business models enable a wide variety of new services for companies looking for growth in services. Currently, manufacturing companies have been actively developing and providing novel asset based services such as condition monitoring and remote control. However, there is still untapped potential in extending the service delivery to the long-term co-operative development of physical assets over the whole lifecycle. Close collaboration with the end-customer and other stakeholders is needed in order to understand the value generation options. In this paper, we assess some of the asset services manufacturing companies are currently developing. The descriptions of the asset services are based on the results of an industrial workshop in which the companies presented their service development plans. The service propositions are compared with the Total Cost of Ownership and the closed loop life cycle frameworks. Based on the comparison, gaps that indicate potential for extended asset service concepts are recognised. In conclusion, we argue that the manufacturing companies do not recognise the whole potential for asset based services and for optimizing the performance of the end customers' processes.

Review: Polymeric-Based 3D Printing for Tissue Engineering.

PubMed

Wu, Geng-Hsi; Hsu, Shan-Hui

Three-dimensional (3D) printing, also referred to as additive manufacturing, is a technology that allows for customized fabrication through computer-aided design. 3D printing has many advantages in the fabrication of tissue engineering scaffolds, including fast fabrication, high precision, and customized production. Suitable scaffolds can be designed and custom-made based on medical images such as those obtained from computed tomography. Many 3D printing methods have been employed for tissue engineering. There are advantages and limitations for each method. Future areas of interest and progress are the development of new 3D printing platforms, scaffold design software, and materials for tissue engineering applications.

Custom Titanium Ridge Augmentation Matrix (CTRAM): A Case Report.

PubMed

Connors, Christopher A; Liacouras, Peter C; Grant, Gerald T

2016-01-01

This is a case report of a custom titanium ridge augmentation matrix (CTRAM). Using cone beam computed tomography (CBCT), a custom titanium space-maintaining device was developed. Alveolar ridges were virtually augmented, a matrix was virtually designed, and the CTRAM was additively manufactured with titanium (Ti6Al4V). Two cases are presented that resulted in sufficient increased horizontal bone volume with successful dental implant placement. The CTRAM design allows for preoperative planning for increasing alveolar ridge dimensions to support dental implants, reduces surgical time, and prevents the need for a second surgical site to gain sufficient alveolar ridge bone volume for dental implant therapy.

19 CFR 177.13 - Inconsistent customs decisions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Inconsistent customs decisions. 177.13 Section 177.13 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) ADMINISTRATIVE RULINGS General Ruling Procedure § 177.13 Inconsistent customs...

19 CFR 177.13 - Inconsistent customs decisions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Inconsistent customs decisions. 177.13 Section 177.13 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) ADMINISTRATIVE RULINGS General Ruling Procedure § 177.13 Inconsistent customs...

19 CFR 177.13 - Inconsistent customs decisions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Inconsistent customs decisions. 177.13 Section 177.13 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) ADMINISTRATIVE RULINGS General Ruling Procedure § 177.13 Inconsistent customs...

19 CFR 191.37 - Destruction under Customs supervision.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Destruction under Customs supervision. 191.37 Section 191.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... Customs supervision. A claimant may destroy merchandise and obtain unused merchandise drawback by...

19 CFR 191.37 - Destruction under Customs supervision.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.37 Section 191.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... Customs supervision. A claimant may destroy merchandise and obtain unused merchandise drawback by...

19 CFR 191.37 - Destruction under Customs supervision.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Destruction under Customs supervision. 191.37 Section 191.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... Customs supervision. A claimant may destroy merchandise and obtain unused merchandise drawback by...

19 CFR 191.37 - Destruction under Customs supervision.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Destruction under Customs supervision. 191.37 Section 191.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... Customs supervision. A claimant may destroy merchandise and obtain unused merchandise drawback by...

19 CFR 191.37 - Destruction under Customs supervision.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Destruction under Customs supervision. 191.37 Section 191.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... Customs supervision. A claimant may destroy merchandise and obtain unused merchandise drawback by...

ArrayInitiative - a tool that simplifies creating custom Affymetrix CDFs

PubMed Central

2011-01-01

Background Probes on a microarray represent a frozen view of a genome and are quickly outdated when new sequencing studies extend our knowledge, resulting in significant measurement error when analyzing any microarray experiment. There are several bioinformatics approaches to improve probe assignments, but without in-house programming expertise, standardizing these custom array specifications as a usable file (e.g. as Affymetrix CDFs) is difficult, owing mostly to the complexity of the specification file format. However, without correctly standardized files there is a significant barrier for testing competing analysis approaches since this file is one of the required inputs for many commonly used algorithms. The need to test combinations of probe assignments and analysis algorithms led us to develop ArrayInitiative, a tool for creating and managing custom array specifications. Results ArrayInitiative is a standalone, cross-platform, rich client desktop application for creating correctly formatted, custom versions of manufacturer-provided (default) array specifications, requiring only minimal knowledge of the array specification rules and file formats. Users can import default array specifications, import probe sequences for a default array specification, design and import a custom array specification, export any array specification to multiple output formats, export the probe sequences for any array specification and browse high-level information about the microarray, such as version and number of probes. The initial release of ArrayInitiative supports the Affymetrix 3' IVT expression arrays we currently analyze, but as an open source application, we hope that others will contribute modules for other platforms. Conclusions ArrayInitiative allows researchers to create new array specifications, in a standard format, based upon their own requirements. This makes it easier to test competing design and analysis strategies that depend on probe definitions. Since the custom array specifications are easily exported to the manufacturer's standard format, researchers can analyze these customized microarray experiments using established software tools, such as those available in Bioconductor. PMID:21548938

Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology.

PubMed

Chen, Jianyu; Zhang, Zhiguang; Chen, Xianshuai; Zhang, Chunyu; Zhang, Gong; Xu, Zhewu

2014-11-01

Recently a new therapeutic concept of patient-specific implant dentistry has been advanced based on computer-aided design/computer-aided manufacturing technology. However, a comprehensive study of the design and 3-dimensional (3D) printing of the customized implants, their mechanical properties, and their biomechanical behavior is lacking. The purpose of this study was to evaluate the mechanical and biomechanical performance of a novel custom-made dental implant fabricated by the selective laser melting technique with simulation and in vitro experimental studies. Two types of customized implants were designed by using reverse engineering: a root-analog implant and a root-analog threaded implant. The titanium implants were printed layer by layer with the selective laser melting technique. The relative density, surface roughness, tensile properties, bend strength, and dimensional accuracy of the specimens were evaluated. Nonlinear and linear finite element analysis and experimental studies were used to investigate the stress distribution, micromotion, and primary stability of the implants. Selective laser melting 3D printing technology was able to reproduce the customized implant designs and produce high density and strength and adequate dimensional accuracy. Better stress distribution and lower maximum micromotions were observed for the root-analog threaded implant model than for the root-analog implant model. In the experimental tests, the implant stability quotient and pull-out strength of the 2 types of implants indicated that better primary stability can be obtained with a root-analog threaded implant design. Selective laser melting proved to be an efficient means of printing fully dense customized implants with high strength and sufficient dimensional accuracy. Adding the threaded characteristic to the customized root-analog threaded implant design maintained the approximate geometry of the natural root and exhibited better stress distribution and primary stability. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

78 FR 33442 - Manufacturer of Controlled Substances; Notice of Registration; Cerilliant Corporation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

... the listed controlled substances for distribution to their research and forensic customers conducting drug testing and analysis. No comments or objections have been received. DEA has considered the factors...

The Nuts and Bolts of Product Service. The Product Service Industry. Resources in Technology.

ERIC Educational Resources Information Center

Technology Teacher, 1991

1991-01-01

Reviews repair and maintenance services, qualifications for technicians, sociocultural impacts of customer service, and consumer and manufacturer responsibilities. Presents a technology learning activity on product failure. (SK)

27 CFR 19.494 - Additional marks on portable containers.

Code of Federal Regulations, 2011 CFR

2011-04-01

...: (1) Without payment of tax, for export, for transfer to customs manufacturing bonded warehouses, for... required by Federal, State, or local law or regulations; wine or proof gallons; and plant control data...

19 CFR 12.42 - Findings of Commissioner of Customs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Findings of Commissioner of Customs. 12.42 Section 12.42 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Labor § 12.42 Findings of Commissioner of Customs. (a) If any port director or other principal Customs...

19 CFR 12.42 - Findings of Commissioner of Customs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Findings of Commissioner of Customs. 12.42 Section 12.42 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Labor § 12.42 Findings of Commissioner of Customs. (a) If any port director or other principal Customs...

19 CFR 12.42 - Findings of Commissioner of Customs.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Findings of Commissioner of Customs. 12.42 Section 12.42 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Labor § 12.42 Findings of Commissioner of Customs. (a) If any port director or other principal Customs...

19 CFR 12.42 - Findings of Commissioner of Customs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Findings of Commissioner of Customs. 12.42 Section 12.42 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Labor § 12.42 Findings of Commissioner of Customs. (a) If any port director or other principal Customs...

19 CFR 12.42 - Findings of Commissioner of Customs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Findings of Commissioner of Customs. 12.42 Section 12.42 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Labor § 12.42 Findings of Commissioner of Customs. (a) If any port director or other principal Customs...

17 CFR 403.3 - Use of customers' free credit balances.

Code of Federal Regulations, 2010 CFR

2010-04-01

... balances. 403.3 Section 403.3 Commodity and Securities Exchanges DEPARTMENT OF THE TREASURY REGULATIONS UNDER SECTION 15C OF THE SECURITIES EXCHANGE ACT OF 1934 PROTECTION OF CUSTOMER SECURITIES AND BALANCES § 403.3 Use of customers' free credit balances. Every registered government securities broker or dealer...

17 CFR 403.3 - Use of customers' free credit balances.

Code of Federal Regulations, 2011 CFR

2011-04-01

... balances. 403.3 Section 403.3 Commodity and Securities Exchanges DEPARTMENT OF THE TREASURY REGULATIONS UNDER SECTION 15C OF THE SECURITIES EXCHANGE ACT OF 1934 PROTECTION OF CUSTOMER SECURITIES AND BALANCES § 403.3 Use of customers' free credit balances. Every registered government securities broker or dealer...

17 CFR 403.2 - Hypothecation of customer securities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Hypothecation of customer securities. 403.2 Section 403.2 Commodity and Securities Exchanges DEPARTMENT OF THE TREASURY REGULATIONS UNDER SECTION 15C OF THE SECURITIES EXCHANGE ACT OF 1934 PROTECTION OF CUSTOMER SECURITIES AND BALANCES...

Numerical simulation on chain-die forming of an AHSS top-hat section

NASA Astrophysics Data System (ADS)

Majji, Raju; Xiang, Yang; Ding, Scott; Yang, Chunhui

2018-05-01

The applications of Advanced High-Strength Steels (AHSS) in the automotive industry are rapidly increasing due to a demand for a lightweight material that significantly reduces fuel consumption without compromising passenger safety. Automotive industries and material suppliers are expected by consumers to deliver reliable and affordable products, thus stimulating these manufacturers to research solutions to meet these customer requirements. The primary advantage of AHSS is its extremely high strength to weight ratio, an ideal material for the automotive industry. However, its low ductility is a major disadvantage, in particular, when using traditional cold forming processes such as roll forming and deep drawing process to form profiles. Consequently, AHSS parts frequently fail to form. Thereby, in order to improve quality and reliability on manufacturing AHSS products, a recently-developed incremental cold sheet metal forming technology called Chain-die Forming (CDF) is recognised as a potential solution to the forming process of AHSS. The typical CDF process is a combination of bending and roll forming processes which is equivalent to a roll with a large deforming radius, and incrementally forms the desired shape with split die and segments. This study focuses on manufacturing an AHSS top-hat section with minimum passes without geometrical or surface defects by using finite element modelling and simulations. The developed numerical simulation is employed to investigate the influences on the main control parameter of the CDF process while forming AHSS products and further develop new die-punch sets of compensation design via a numerical optimal process. In addition, the study focuses on the tool design to compensate spring-back and reduce friction between tooling and sheet-metal. This reduces the number of passes, thereby improving productivity and reducing energy consumption and material waste. This numerical study reveals that CDF forms AHSS products of complex profiles with much less residual stress, low spring back, low strain and of higher geometrical accuracy compared to other traditional manufacturing processes.

47 CFR 64.2005 - Use of customer proprietary network information without customer approval.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Use of customer proprietary network information without customer approval. 64.2005 Section 64.2005 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2005 Use of customer proprietary network information without customer...

47 CFR 64.2005 - Use of customer proprietary network information without customer approval.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Use of customer proprietary network information without customer approval. 64.2005 Section 64.2005 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Proprietary Network Information § 64.2005 Use of customer proprietary network information without customer...

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akar, Sertac; Augustine, Chad R; Kurup, Parthiv

The global geothermal electricity market has significantly grown over the last decade and is expected to reach a total installed capacity of 18.4 GWe in 2021 (GEA, 2016). Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. In particular, the turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparisonmore » to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. This study focuses on analysis of the global supply chain and manufacturing costs for Organic Rankine Cycle (ORC) turboexpanders and steam turbines used in geothermal power plants. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). MSP is the minimum price that a company must sell its product for in order to pay back the capital and operating expenses during the plant lifetime (CEMAC, 2017). The results showed that MSP could highly vary between 893 dollar/kW and 30 dollar/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number manufactured in a single run. Sensitivity analysis indicated these savings come largely from reduced labor costs for design and engineering and manufacturing setup.« less

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akar, Sertac; Augustine, Chad R; Kurup, Parthiv

The global geothermal electricity market has significantly grown over the last decade and is expected to reach a total installed capacity of 18.4 GWe in 2021 (GEA, 2016). Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. In particular, the turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparisonmore » to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. This study focuses on analysis of the global supply chain and manufacturing costs for Organic Rankine Cycle (ORC) turboexpanders and steam turbines used in geothermal power plants. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). MSP is the minimum price that a company must sell its product for in order to pay back the capital and operating expenses during the plant lifetime (CEMAC, 2017). The results showed that MSP could highly vary between 893 dollar/kW and 30 dollar/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number manufactured in a single run. Sensitivity analysis indicated these savings come largely from reduced labor costs for design and engineering and manufacturing setup.« less

Additive Manufacturing (AM) in Expeditionary Operations: Current Needs, Technical Challenges, and Opportunities

DTIC Science & Technology

2016-06-01

site customization of existing models. The author performed an empirical study centered around a survey of United States Marine Corps (USMC) and United...recommends that more studies be performed to determine the best way forward for AM within the USMC and USN. 14. SUBJECT TERMS 3D printing, additive...customization of existing models. The author performed an em- pirical study centered around a survey of United States Marine Corps (USMC) and United

Using 3D Printing (Additive Manufacturing) to Produce Low-Cost Simulation Models for Medical Training.

PubMed

Lichtenberger, John P; Tatum, Peter S; Gada, Satyen; Wyn, Mark; Ho, Vincent B; Liacouras, Peter

2018-03-01

This work describes customized, task-specific simulation models derived from 3D printing in clinical settings and medical professional training programs. Simulation models/task trainers have an array of purposes and desired achievements for the trainee, defining that these are the first step in the production process. After this purpose is defined, computer-aided design and 3D printing (additive manufacturing) are used to create a customized anatomical model. Simulation models then undergo initial in-house testing by medical specialists followed by a larger scale beta testing. Feedback is acquired, via surveys, to validate effectiveness and to guide or determine if any future modifications and/or improvements are necessary. Numerous custom simulation models have been successfully completed with resulting task trainers designed for procedures, including removal of ocular foreign bodies, ultrasound-guided joint injections, nerve block injections, and various suturing and reconstruction procedures. These task trainers have been frequently utilized in the delivery of simulation-based training with increasing demand. 3D printing has been integral to the production of limited-quantity, low-cost simulation models across a variety of medical specialties. In general, production cost is a small fraction of a commercial, generic simulation model, if available. These simulation and training models are customized to the educational need and serve an integral role in the education of our military health professionals.

Designing of a Digital Behind-the-Ear Hearing Aid to Meet the World Health Organization Requirements

PubMed Central

Bento, Ricardo Ferreira; Penteado, Silvio Pires

2010-01-01

Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce. PMID:20724354

Designing of a digital behind-the-ear hearing aid to meet the World Health Organization requirements.

PubMed

Bento, Ricardo Ferreira; Penteado, Silvio Pires

2010-06-01

Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce.

19 CFR 122.5 - Reproduction of Customs forms.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Reproduction of Customs forms. 122.5 Section 122.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS General Definitions and Provisions § 122.5 Reproduction of Customs forms...

19 CFR 122.5 - Reproduction of Customs forms.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Reproduction of Customs forms. 122.5 Section 122.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS General Definitions and Provisions § 122.5 Reproduction of Customs forms...

19 CFR 146.51 - Customs control of merchandise.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Customs control of merchandise. 146.51 Section 146.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) FOREIGN TRADE ZONES Handling of Merchandise in a Zone § 146.51 Customs...

19 CFR 146.51 - Customs control of merchandise.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Customs control of merchandise. 146.51 Section 146.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) FOREIGN TRADE ZONES Handling of Merchandise in a Zone § 146.51 Customs...

19 CFR 146.51 - Customs control of merchandise.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Customs control of merchandise. 146.51 Section 146.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) FOREIGN TRADE ZONES Handling of Merchandise in a Zone § 146.51 Customs...

19 CFR 146.51 - Customs control of merchandise.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Customs control of merchandise. 146.51 Section 146.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) FOREIGN TRADE ZONES Handling of Merchandise in a Zone § 146.51 Customs...

19 CFR 146.51 - Customs control of merchandise.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Customs control of merchandise. 146.51 Section 146.51 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) FOREIGN TRADE ZONES Handling of Merchandise in a Zone § 146.51 Customs...

19 CFR 191.71 - Drawback on articles destroyed under Customs supervision.

Code of Federal Regulations, 2012 CFR

2012-04-01

... supervision. 191.71 Section 191.71 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... articles destroyed under Customs supervision. (a) Procedure. At least 7 working days before the intended... Customs supervision. Unless Customs determines to witness the destruction, the destruction of the articles...

19 CFR 19.34 - Customs supervision.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Customs supervision. 19.34 Section 19.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... Wheat § 19.34 Customs supervision. Port directors shall exercise such supervision and control over the...

19 CFR 19.34 - Customs supervision.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Customs supervision. 19.34 Section 19.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... Wheat § 19.34 Customs supervision. Port directors shall exercise such supervision and control over the...

19 CFR 19.34 - Customs supervision.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Customs supervision. 19.34 Section 19.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... Wheat § 19.34 Customs supervision. Port directors shall exercise such supervision and control over the...

19 CFR 19.34 - Customs supervision.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Customs supervision. 19.34 Section 19.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... Wheat § 19.34 Customs supervision. Port directors shall exercise such supervision and control over the...

19 CFR 191.71 - Drawback on articles destroyed under Customs supervision.

Code of Federal Regulations, 2010 CFR

2010-04-01

... supervision. 191.71 Section 191.71 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... articles destroyed under Customs supervision. (a) Procedure. At least 7 working days before the intended... Customs supervision. Unless Customs determines to witness the destruction, the destruction of the articles...

19 CFR 115.17 - Appeal to Commissioner of Customs.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Appeal to Commissioner of Customs. 115.17 Section 115.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.18 - Decision of Commissioner of Customs final.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Decision of Commissioner of Customs final. 115.18 Section 115.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.18 - Decision of Commissioner of Customs final.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Decision of Commissioner of Customs final. 115.18 Section 115.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.17 - Appeal to Commissioner of Customs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Appeal to Commissioner of Customs. 115.17 Section 115.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.17 - Appeal to Commissioner of Customs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Appeal to Commissioner of Customs. 115.17 Section 115.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.18 - Decision of Commissioner of Customs final.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Decision of Commissioner of Customs final. 115.18 Section 115.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.18 - Decision of Commissioner of Customs final.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Decision of Commissioner of Customs final. 115.18 Section 115.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.17 - Appeal to Commissioner of Customs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Appeal to Commissioner of Customs. 115.17 Section 115.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.18 - Decision of Commissioner of Customs final.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Decision of Commissioner of Customs final. 115.18 Section 115.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 115.17 - Appeal to Commissioner of Customs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Appeal to Commissioner of Customs. 115.17 Section 115.17 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS...

19 CFR 122.181 - Definition of Customs security area.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Definition of Customs security area. 122.181 Section 122.181 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.181 Definition of...

19 CFR 122.181 - Definition of Customs security area.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Definition of Customs security area. 122.181 Section 122.181 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.181 Definition of...

19 CFR 122.181 - Definition of Customs security area.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Definition of Customs security area. 122.181 Section 122.181 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.181 Definition of...

19 CFR 122.181 - Definition of Customs security area.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Definition of Customs security area. 122.181 Section 122.181 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.181 Definition of...

76 FR 22817 - Approval and Promulgation of Air Quality Implementation Plans; South Carolina; Update to...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-25

... Manufacturing'' 5. ``Section VI--Hot Mix Asphalt Manufacturing'' 6. ``Section VII--Metal Refining;'' [[Page... Industries 1. ``Section III--Kraft Pulp and Paper Manufacturing Plants'' 2. ``Section VI--Hot Mix Asphalt... Manufacturing'' 3. ``Section XI--Total Reduced Sulfur Emissions of Kraft Pulp Mills;'' viii. Regulation 62.5...

Agile manufacturing concept

NASA Astrophysics Data System (ADS)

Goldman, Steven L.

1994-03-01

The initial conceptualization of agile manufacturing was the result of a 1991 study -- chaired by Lehigh Professor Roger N. Nagel and California-based entrepreneur Rick Dove, President of Paradigm Shifts, International -- of what it would take for U.S. industry to regain global manufacturing competitiveness by the early twenty-first century. This industry-led study, reviewed by senior management at over 100 companies before its release, concluded that incremental improvement of the current system of manufacturing would not be enough to be competitive in today's global marketplace. Computer-based information and production technologies that were becoming available to industry opened up the possibility of an altogether new system of manufacturing, one that would be characterized by a distinctive integration of people and technologies; of management and labor; of customers, producers, suppliers, and society.

Smart Manufacturing.

PubMed

Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

2015-01-01

Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

Practical LCA for short shelf life products

NASA Astrophysics Data System (ADS)

Laurin, Lise; Goedkoop, Mark; Norris, Greg

2005-11-01

Manufacturers in many of today's industries are faced with product shelf life counted in months. Traditionally, this has made it very difficult to make a life cycle assessment (LCA) of a product, since the product would be obsolete by the time the LCA was completed. A new concept in LCA that allows specialists in things other than LCA to rapidly create both a model and generate "what-if" scenarios will allow even manufacturers of short shelf life products take advantage of the benefits of LCA. These industry-specific "wizards" are built around a manufacturing process and can be rapidly updated or customized to a particular manufacturer or process type. Results can be used internally for decision-making and can also enable manufacturers submit information for environmentally preferable purchasing, eco-labels, etc.

A novel computer-aided method to fabricate a custom one-piece glass fiber dowel-and-core based on digitized impression and crown preparation data.

PubMed

Chen, Zhiyu; Li, Ya; Deng, Xuliang; Wang, Xinzhi

2014-06-01

Fiber-reinforced composite dowels have been widely used for their superior biomechanical properties; however, their preformed shape cannot fit irregularly shaped root canals. This study aimed to describe a novel computer-aided method to create a custom-made one-piece dowel-and-core based on the digitization of impressions and clinical standard crown preparations. A standard maxillary die stone model containing three prepared teeth each (maxillary lateral incisor, canine, premolar) requiring dowel restorations was made. It was then mounted on an average value articulator with the mandibular stone model to simulate natural occlusion. Impressions for each tooth were obtained using vinylpolysiloxane with a sectional dual-arch tray and digitized with an optical scanner. The dowel-and-core virtual model was created by slicing 3D dowel data from impression digitization with core data selected from a standard crown preparation database of 107 records collected from clinics and digitized. The position of the chosen digital core was manually regulated to coordinate with the adjacent teeth to fulfill the crown restorative requirements. Based on virtual models, one-piece custom dowel-and-cores for three experimental teeth were milled from a glass fiber block with computer-aided manufacturing techniques. Furthermore, two patients were treated to evaluate the practicality of this new method. The one-piece glass fiber dowel-and-core made for experimental teeth fulfilled the clinical requirements for dowel restorations. Moreover, two patients were treated to validate the technique. This novel computer-aided method to create a custom one-piece glass fiber dowel-and-core proved to be practical and efficient. © 2013 by the American College of Prosthodontists.

17 CFR 1.67 - Notification of final disciplinary action involving financial harm to a customer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... disciplinary action involving financial harm to a customer. 1.67 Section 1.67 Commodity and Securities... Miscellaneous § 1.67 Notification of final disciplinary action involving financial harm to a customer. (a) Definitions. For purposes of this section: (1) Final disciplinary action means any decision by or settlement...

19 CFR 191.133 - Explanation of terms.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Explanation of terms. 191.133 Section 191.133 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE... Foreign Ownership and Account § 191.133 Explanation of terms. (a) Materials. Section 313(g) of the Act, as...

19 CFR 191.133 - Explanation of terms.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Explanation of terms. 191.133 Section 191.133 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE... Foreign Ownership and Account § 191.133 Explanation of terms. (a) Materials. Section 313(g) of the Act, as...

19 CFR 162.92 - Notice of seizure.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Notice of seizure. 162.92 Section 162.92 Customs... (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Civil Asset Forfeiture Reform Act § 162.92 Notice of seizure. (a) Generally. Customs will send written notice of seizure as provided in this section to all known interested...

19 CFR 10.533 - De minimis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false De minimis. 10.533 Section 10.533 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... Rules of Origin § 10.533 De minimis. (a) Except as provided in paragraphs (b) and (c) of this section, a...

19 CFR 10.459 - De minimis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false De minimis. 10.459 Section 10.459 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... of Origin § 10.459 De minimis. (a) Except as provided in paragraphs (b) and (c) of this section, a...

Component, Context and Manufacturing Model Library (C2M2L)

DTIC Science & Technology

2013-03-01

Penn State team were stored in a relational database for easy access, storage and maintainability. The relational database consisted of a PostGres ...file into a format that can be imported into the PostGres database. This same custom application was used to generate Microsoft Excel templates...Press Break Forming Equipment 4.14 Manufacturing Model Library Database Structure The data storage mechanism for the ARL PSU MML was a PostGres database

Simulation Environment Synchronizing Real Equipment for Manufacturing Cell

NASA Astrophysics Data System (ADS)

Inukai, Toshihiro; Hibino, Hironori; Fukuda, Yoshiro

Recently, manufacturing industries face various problems such as shorter product life cycle, more diversified customer needs. In this situation, it is very important to reduce lead-time of manufacturing system constructions. At the manufacturing system implementation stage, it is important to make and evaluate facility control programs for a manufacturing cell, such as ladder programs for programmable logical controllers (PLCs) rapidly. However, before the manufacturing systems are implemented, methods to evaluate the facility control programs for the equipment while mixing and synchronizing real equipment and virtual factory models on the computers have not been developed. This difficulty is caused by the complexity of the manufacturing system composed of a great variety of equipment, and stopped precise and rapid support of a manufacturing engineering process. In this paper, a manufacturing engineering environment (MEE) to support manufacturing engineering processes using simulation technologies is proposed. MEE consists of a manufacturing cell simulation environment (MCSE) and a distributed simulation environment (DSE). MCSE, which consists of a manufacturing cell simulator and a soft-wiring system, is emphatically proposed in detail. MCSE realizes making and evaluating facility control programs by using virtual factory models on computers before manufacturing systems are implemented.

19 CFR 101.7 - Customs seal.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U... GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department of the Treasury, the Customs seal of the United States shall consist of the seal of the Department of...

19 CFR 101.7 - Customs seal.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U... GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department of the Treasury, the Customs seal of the United States shall consist of the seal of the Department of...

19 CFR 122.188 - Issuance of temporary Customs access seal.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Issuance of temporary Customs access seal. 122.188 Section 122.188 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.188 Issuance of...

19 CFR 122.188 - Issuance of temporary Customs access seal.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Issuance of temporary Customs access seal. 122.188 Section 122.188 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.188 Issuance of...

19 CFR 122.188 - Issuance of temporary Customs access seal.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Issuance of temporary Customs access seal. 122.188 Section 122.188 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.188 Issuance of...

19 CFR 122.181 - Definition of Customs security area.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Definition of Customs security area. 122.181...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.181 Definition of Customs security area. For purposes of this section, the term “Customs security area” means the Federal...

Mining consumer reviews to generate ratings of different product attributes while producing feature-based review-summary

NASA Astrophysics Data System (ADS)

Kangale, Akshay; Krishna Kumar, S.; Arshad Naeem, Mohd; Williams, Mark; Tiwari, M. K.

2016-10-01

With the massive growth of the internet, product reviews increasingly serve as an important source of information for customers to make choices online. Customers depend on these reviews to understand users' experience, and manufacturers rely on this user-generated content to capture user sentiments about their product. Therefore, it is in the best interest of both customers and manufacturers to have a portal where they can read a complete comprehensive summary of these reviews in minimum time. With this in mind, we arrived at our first objective which is to generate a feature-based review-summary. Our second objective is to develop a predictive model to know the next week's product sales based on numerical review ratings and textual features embedded in the reviews. When it comes to product features, every user has different priorities for different features. To capture this aspect of decision-making, we have designed a new mechanism to generate a numerical rating for every feature of the product individually. The data have been collected from a well-known commercial website for two different products. The validation of the model is carried out using a crowd-sourcing technique.

Evaluation of the Sparton tight-tolerance AXBT

NASA Technical Reports Server (NTRS)

Boyd, Janice D.; Linzell, Robert S.

1993-01-01

Forty-six near-simultaneous pairs of conductivity - temperature - depth (CTD) and Sparton 'tight tolerance' air expendable bathythermograph (AXBT) temperature profiles were obtained in summer 1991 from a location in the Sargasso Sea. The data were analyzed to assess the temperature and depth accuracies of the Sparton AXBTs. The tight-tolerance criterion was not achieved using the manufacturer's equations but may have been achieved using customized equations computed from the CTD data. The temperature data from the customized equations had a one standard deviation error of 0.13 C. A customized elapsed fall time-to-depth conversion equation was found to be z = 1.620t - 2.2384 x 10(exp -4) t(exp 2) + 1.291 x 10(exp -7) t(exp 3), with z the depth in meters and t the elapsed fall time after probe release in seconds. The standard deviation of the depth error was about 5 m; a rule of thumb for estimating maximum bounds on the depth error below 100 m could be expressed as +/-2% of depth or +/- 10 m, whichever is greater. This equation gave greater depth accuracy than either the manufacturer's supplied equation or the navy standard equation.

Custom blending of lamp phosphors

NASA Technical Reports Server (NTRS)

Klemm, R. E.

1978-01-01

Spectral output of fluorescent lamps can be precisely adjusted by using computer-assisted analysis for custom blending lamp phosphors. With technique, spectrum of main bank of lamps is measured and stored in computer memory along with emission characteristics of commonly available phosphors. Computer then calculates ratio of green and blue intensities for each phosphor according to manufacturer's specifications and plots them as coordinates on graph. Same ratios are calculated for measured spectrum. Once proper mix is determined, it is applied as coating to fluorescent tubing.

Adding value in additive manufacturing: researchers in the United Kingdom and Europe look to 3D printing for customization.

PubMed

Banks, Jim

2013-01-01

Having already made a big impact in the medical sector, three-dimensional (3-D) printing technology continues to push the boundaries of cost efficiency, convenience, and customization. It has transformed some aspects of medical device production. However, expectations of the technology are often exaggerated in the media, so we spoke to leading researchers in the field about its practical applications and what can be expected in the near future.

Service first puts hospital in touch. Interview by Donald E.L. Johnson.

PubMed

Weseli, R W

1990-07-01

Good Samaritan Hospital, an 82-bed institution in Cincinnati, Ohio, won the 1989 Award of Excellence of the International Customer Service Association (ICSA), a non-profit organization dedicated to developing customer service. In the following interview with Health Care Strategic Management's publisher, Donald E.L. Johnson, Roger W. Weseli, Good Samaritan's CEO discusses the guest relations and service first programs that have changed his institution and earned it recognition as the first hospital to win the ICSA non-manufacturing group award.

Commercial Electric Vehicle (EV) Development and Manufacturing Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leeve, Dion

Navistar with the Department of Energy’s assistance undertook this effort to achieve the project objectives as listed in the next section. A wholly owned subsidiary of Navistar, Workhorse Sales Corporation was the original grant awardee and upon their discontinuation as a standalone business entity, Navistar assumed the role of principal investigator. The intent of the effort, as part of the American Recovery and Reinvestment Act (ARRA) was to produce zero emission vehicles that could meet the needs of the marketplace while reducing carbon emissions to zero. This effort was predicated upon the assumption that concurrent development activities in the lithiummore » ion battery industry investigations would significantly increase their production volumes thus leading to substantial reductions in their manufacturing costs. As a result of this development effort much was learned about the overall system compatibility between the electric motor, battery pack, and charging capabilities. The original system was significantly revised and improved during the execution of this development effort. The overall approach that was chosen was to utilize a British zero emissions, class 2 truck that had been developed for their market, homologate it and modify it to meet the product requirements as specified in the grant details. All of these specific goals were achieved. During the course of marketing and selling the product valuable information was obtained as relates to customer expectations, price points, and product performance expectations, specifically those customer expectations about range requirements in urban delivery situations. While the grant requirements specified a range of 100 miles on a single charge, actual customer usage logs indicate a range of 40 miles or less is typical for their applications. The price point, primarily due to battery pack costs, was significantly higher than the mass market could bear. From Navistar’s and the overall industry’s perspective, valuable insights and lessons into this all-electric vehicle propulsion were gained during the performance of this effort and can be revisited when battery chemistry and technology advance to the point of more suitable economic viability. Additionally, another goal of the ARRA act and this specific grant was to manufacture the product in the, at that time, economically depressed Northwest Indiana area. Navistar chose a location in Wakarusa, Indiana which fulfilled this requirement. Navistar was and continues to be committed to alternative fuel and propulsion options as an industry leader in the medium and heavy duty truck industry.« less

78 FR 58305 - Honeywell International, Inc.; Analysis of Agreement Containing Consent Order To Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

..., formulas, patterns, devices, manufacturing processes, or customer names. If you want the Commission to give... barcode scanners, barcode printers, RFID systems and voice recognition systems. III. Scan Engines The...

19 CFR 10.1 - Domestic products; requirements on entry.

Code of Federal Regulations, 2010 CFR

2010-04-01

... manufacture or other means. Marks Number Quantity Description Value, in U.S. coin (Date) (Signature) (Address... knowledge of the facts shall furnish a written declaration which may be made on the reverse side of Customs...

Truck side guard specifications : recommended standard

DOT National Transportation Integrated Search

2016-09-01

This document is intended to be used by (1) public or private medium/heavy-duty truck fleets considering adding side guards; (2) jurisdictions or customers that require side guards through policy or procurement; (3) manufacturers of side guards; and ...

75 FR 11113 - Action Affecting Export Privileges; Aviation Services International, B.V.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-10

... the United States on behalf of Iranian customers and give U.S. manufacturers false information regarding the ultimate destination, end user, and end use of the items, thereby causing false export control...

19 CFR 181.48 - Person entitled to receive drawback.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., Canadian or Mexican customs manifest, cargo manifest, or certified copies of these documents, shall be... reserve the right to claim drawback. The manufacturer or producer who reserves this right may claim... right to claim drawback. ...

78 FR 73907 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... Change Relating to the Customer Rebate Program December 3, 2013. Pursuant to Section 19(b)(1) of the... The Exchange proposes to amend the Customer Rebate Program in Section B of the Pricing Schedule. The..., the Proposed Rule Change 1. Purpose The Exchange proposes to increase certain Customer rebates in the...

19 CFR 10.59 - Exemption from customs duties and internal-revenue tax.

Code of Federal Regulations, 2012 CFR

2012-04-01

... tax. 10.59 Section 10.59 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... beer conditionally free under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), if the port... wine cellar, or brewery; and drawback on taxpaid distilled spirits or wines removed from an export...

19 CFR 10.59 - Exemption from customs duties and internal-revenue tax.

Code of Federal Regulations, 2014 CFR

2014-04-01

... tax. 10.59 Section 10.59 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... beer conditionally free under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), if the port... wine cellar, or brewery; and drawback on taxpaid distilled spirits or wines removed from an export...

19 CFR 10.59 - Exemption from customs duties and internal-revenue tax.

Code of Federal Regulations, 2013 CFR

2013-04-01

... tax. 10.59 Section 10.59 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... beer conditionally free under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), if the port... wine cellar, or brewery; and drawback on taxpaid distilled spirits or wines removed from an export...

17 CFR 160.10 - Limits on disclosure of nonpublic personal information to nonaffiliated third parties.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section, regardless of whether you and the consumer have established a customer relationship. (2) Unless... customer opens an on-line account with you and agrees to receive the notices required in paragraph (a)(1) of this section electronically, and you allow the customer to opt out by any reasonable means within...

17 CFR 248.10 - Limits on disclosure of nonpublic personal information to nonaffiliated third parties.

Code of Federal Regulations, 2010 CFR

2010-04-01

... you and the consumer have established a customer relationship. (2) Unless you comply with this section... customer opens an on-line account with you and agrees to receive the notices required in paragraph (a)(1) of this section electronically, and you allow the customer to opt out by any reasonable means within...

The integration between Business Model Canvas and Manufacturing System Design

NASA Astrophysics Data System (ADS)

Prasetyawan, Y.; Maulida, N.; Lutvitasari, M. R.

2018-04-01

Business Model Canvas (BMC) is an increasingly popular business design tool especially for a start-up business and new business player. In general, BMC seeks a balance between effective working patterns with suppliers, good relation with customers and ability to understand and manage internal resources. This balance will expedite the implementation of Manufacturing System Design (MSD). The existing use of BMC and MSD is frequently applied separately at various business levels. BMC business plan is primarily to have engagement with customers and explore potential revenue to increase profits, while MSD primarily aims to meet production targets with available resources. The purpose of this research is to provide a roadmap to align BMC and MSD. A series of simple mathematical (modified) and integration models are created to connect BMC and MSD. Several results in various industries (new, developed and mature) are presented and used as examples of implementation.

Estimating Power Outage Cost based on a Survey for Industrial Customers

NASA Astrophysics Data System (ADS)

Yoshida, Yoshikuni; Matsuhashi, Ryuji

A survey was conducted on power outage cost for industrial customers. 5139 factories, which are designated energy management factories in Japan, answered their power consumption and the loss of production value due to the power outage in an hour in summer weekday. The median of unit cost of power outage of whole sectors is estimated as 672 yen/kWh. The sector of services for amusement and hobbies and the sector of manufacture of information and communication electronics equipment relatively have higher unit cost of power outage. Direct damage cost from power outage in whole sectors reaches 77 billion yen. Then utilizing input-output analysis, we estimated indirect damage cost that is caused by the repercussion of production halt. Indirect damage cost in whole sectors reaches 91 billion yen. The sector of wholesale and retail trade has the largest direct damage cost. The sector of manufacture of transportation equipment has the largest indirect damage cost.

Integrated model for pricing, delivery time setting, and scheduling in make-to-order environments

NASA Astrophysics Data System (ADS)

Garmdare, Hamid Sattari; Lotfi, M. M.; Honarvar, Mahboobeh

2018-03-01

Usually, in make-to-order environments which work only in response to the customer's orders, manufacturers for maximizing the profits should offer the best price and delivery time for an order considering the existing capacity and the customer's sensitivity to both the factors. In this paper, an integrated approach for pricing, delivery time setting and scheduling of new arrival orders are proposed based on the existing capacity and accepted orders in system. In the problem, the acquired market demands dependent on the price and delivery time of both the manufacturer and its competitors. A mixed-integer non-linear programming model is presented for the problem. After converting to a pure non-linear model, it is validated through a case study. The efficiency of proposed model is confirmed by comparing it to both the literature and the current practice. Finally, sensitivity analysis for the key parameters is carried out.

Quantifying Reliability - The Next Step for a Rapidly Maturing PV Industry and China's Role

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurtz, Sarah

2015-10-14

PV customers wish to know how long their PV modules will last, but quantitatively predicting service life is difficult because of the large number of ways that a module can fail, the variability of the use environment, the cost of the testing, and the short product development time, especially when compared with the long desired lifetime. China should play a key role in developing international standards because China manufactures most of the world's PV modules. The presentation will describe the steps that need to be taken to create a service life prediction within the context of a defined bill ofmore » materials, process window and use environment. Worldwide standards for cost-effective approaches to service-life predictions will be beneficial to both PV customers and manufacturers since the consequences of premature module failure can be disastrous for both.« less

Functionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing.

PubMed

Krakhmalev, Pavel; Yadroitsev, Igor; Yadroitsava, Ina; de Smidt, Olga

2017-10-03

The modern medical industry successfully utilizes Laser Powder Bed Fusion (LPBF) to manufacture complex custom implants. Ti6Al4V is one of the most commonly used biocompatible alloys. In surgery practice, infection at the bone-implant interface is one of the key reasons for implant failure. Therefore, advanced implants with biocompatibility and antibacterial properties are required. Modification of Ti alloy with Cu, which in small concentrations is a proven non-toxic antibacterial agent, is an attractive way to manufacture implants with embedded antibacterial functionality. The possibility of achieving alloying in situ, during manufacturing, is a unique option of the LPBF technology. It provides unique opportunities to manufacture customized implant shapes and design new alloys. Nevertheless, optimal process parameters need to be established for the in situ alloyed materials to form dense parts with required mechanical properties. This research is dedicated to an investigation of Ti6Al4V (ELI)-1 at % Cu material, manufactured by LPBF from a mixture of Ti6Al4V (ELI) and pure Cu powders. The effect of process parameters on surface roughness, chemical composition and distribution of Cu was investigated. Chemical homogeneity was discussed in relation to differences in the viscosity and density of molten Cu and Ti6Al4V. Microstructure, mechanical properties, and fracture behavior of as-built 3D samples were analyzed and discussed. Pilot antibacterial functionalization testing of Ti6Al4V (ELI) in situ alloyed with 1 at % Cu showed promising results and notable reduction in the growth of pure cultures of Escherichia coli and Staphylococcus aureus.

Functionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing

PubMed Central

Krakhmalev, Pavel; Yadroitsev, Igor; Yadroitsava, Ina; de Smidt, Olga

2017-01-01

The modern medical industry successfully utilizes Laser Powder Bed Fusion (LPBF) to manufacture complex custom implants. Ti6Al4V is one of the most commonly used biocompatible alloys. In surgery practice, infection at the bone–implant interface is one of the key reasons for implant failure. Therefore, advanced implants with biocompatibility and antibacterial properties are required. Modification of Ti alloy with Cu, which in small concentrations is a proven non-toxic antibacterial agent, is an attractive way to manufacture implants with embedded antibacterial functionality. The possibility of achieving alloying in situ, during manufacturing, is a unique option of the LPBF technology. It provides unique opportunities to manufacture customized implant shapes and design new alloys. Nevertheless, optimal process parameters need to be established for the in situ alloyed materials to form dense parts with required mechanical properties. This research is dedicated to an investigation of Ti6Al4V (ELI)-1 at % Cu material, manufactured by LPBF from a mixture of Ti6Al4V (ELI) and pure Cu powders. The effect of process parameters on surface roughness, chemical composition and distribution of Cu was investigated. Chemical homogeneity was discussed in relation to differences in the viscosity and density of molten Cu and Ti6Al4V. Microstructure, mechanical properties, and fracture behavior of as-built 3D samples were analyzed and discussed. Pilot antibacterial functionalization testing of Ti6Al4V (ELI) in situ alloyed with 1 at % Cu showed promising results and notable reduction in the growth of pure cultures of Escherichia coli and Staphylococcus aureus. PMID:28972546

14 CFR 1214.805 - Unforeseen customer delay.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Unforeseen customer delay. 1214.805 Section... for Spacelab Services § 1214.805 Unforeseen customer delay. Should an unforeseen customer payload..., if requested by the customer, make all reasonable efforts to prevent a delay, contingent on the...

19 CFR 191.44 - Destruction under Customs supervision.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Destruction under Customs supervision. 191.44 Section 191.44 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... supervision. A claimant may destroy merchandise and obtain rejected merchandise drawback by complying with the...

19 CFR 191.44 - Destruction under Customs supervision.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Destruction under Customs supervision. 191.44 Section 191.44 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... supervision. A claimant may destroy merchandise and obtain rejected merchandise drawback by complying with the...

19 CFR 191.44 - Destruction under Customs supervision.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Destruction under Customs supervision. 191.44 Section 191.44 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... supervision. A claimant may destroy merchandise and obtain rejected merchandise drawback by complying with the...

19 CFR 191.44 - Destruction under Customs supervision.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.44 Section 191.44 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... supervision. A claimant may destroy merchandise and obtain rejected merchandise drawback by complying with the...

19 CFR 191.44 - Destruction under Customs supervision.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Destruction under Customs supervision. 191.44 Section 191.44 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... supervision. A claimant may destroy merchandise and obtain rejected merchandise drawback by complying with the...

19 CFR 151.54 - Testing by Customs laboratory.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Testing by Customs laboratory. 151.54 Section 151.54 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Metal-Bearing Ores and...

19 CFR 151.54 - Testing by Customs laboratory.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Testing by Customs laboratory. 151.54 Section 151.54 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Metal-Bearing Ores and...

19 CFR 151.54 - Testing by Customs laboratory.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Testing by Customs laboratory. 151.54 Section 151.54 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Metal-Bearing Ores and...

Apparatus and method for optimal phase balancing using dynamic programming with spatial consideration

DOEpatents

Robertazzi, Thomas G.; Skiena, Steven; Wang, Kai

2017-08-08

Provided are an apparatus and method for load-balancing of a three-phase electric power distribution system having a multi-phase feeder, including obtaining topology information of the feeder identifying supply points for customer loads and feeder sections between the supply points, obtaining customer information that includes peak customer load at each of the points between each of the feeder sections, performing a phase balancing analysis, and recommending phase assignment at the customer load supply points.

Development of novel IVD assays: a manufacturer's perspective.

PubMed

Metcalfe, Thomas A

2010-01-01

IVD manufacturers are heavily reliant on novel IVD assays to fuel their growth and drive innovation within the industry. They represent a key part of the IVD industry's value proposition to customers and the healthcare industry in general, driving product differentiation, helping to create demand for new systems and generating incremental revenue. However, the discovery of novel biomarkers and their qualification for a specific clinical purpose is a high risk undertaking and the large, risky investments associated with doing this on a large scale are incompatible with IVD manufacturer's business models. This article describes the sources of novel IVD assays, the processes for discovering and qualifying novel assays and the reliance of IVD manufacturers on collaborations and in-licensing to source new IVD assays for their platforms.

Reticle variation influence on manufacturing line and wafer device performance

NASA Astrophysics Data System (ADS)

Nistler, John L.; Spurlock, Kyle

1994-01-01

Cost effective manufacturing of devices at 0.5, 0.35 and 0.25μm geometries will be highly dependent on a companys' ability to obtain an economic return on investment. The high capital investment in equipment and facilities, not to mention the related chemical and wafer costs, for producing 200mm silicon wafers requires aspects of wafer processing to be tightly controlled. Reduction in errors and enhanced yield management requires early correction or avoidance of reticle problems. It is becoming increasingly important to recognize and track all pertinent factors impacting both the technical and financial viability of a wafer manufacturing fabrication area. Reticle related effects on wafer manufacturing can be costly and affect the total quality perceived by the device customer.

Continuous Flow in Labour-Intensive Manufacturing Process

NASA Astrophysics Data System (ADS)

Pacheco Eng., Jhonny; Carbajal MSc., Eduardo; Stoll-Ing., Cesar, Dr.

2017-06-01

A continuous-flow manufacturing represents the peak of standard production, and usually it means high production in a strict line production. Furthermore, low-tech industry demands high labour-intensive, in this context the efficient of the line production is tied at the job shop organization. Labour-intensive manufacturing processes are a common characteristic for developing countries. This research aims to propose a methodology for production planning in order to fulfilment a variable monthly production quota. The main idea is to use a clock as orchestra director in order to synchronize the rate time (takt time) of customer demand with the manufacturing time. In this way, the study is able to propose a stark reduction of stock in process, over-processing, and unnecessary variability.

19 CFR 101.4 - Entry and clearance of vessels at Customs stations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Entry and clearance of vessels at Customs stations. 101.4 Section 101.4 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY GENERAL PROVISIONS § 101.4 Entry and clearance of vessels at Customs stations. (a) Entry at Customs station. A vesse...

ICAM (Integrated Computer-Aided Manufacturing) Manufacturing Cost/Design Guide. Volume 7. Technology Transfer Summary.

DTIC Science & Technology

1984-09-01

Application Cited Deere and Company e Assist in design of electronic systems for tractors, crawlers, graders, scrapers, etc. Defense Contract Audit Agency . Aid...in developing and enhancing operational audits . DoD, Cameron Station e Conduct affordability analyses; evalu- ate new start systems. DoD, Defense...document productivity gains. e Promotes better inLustry and customer re~latons by providing a common baseline or starting polut for cost vs. perfor- vanz

Sequential Pattern Detection and Time Series Models for Predicting IED Attacks

DTIC Science & Technology

2009-03-01

customer purchases spaghetti sauce at the grocery store, do they also purchase some kind of meat and pasta noodles ? Knowing what items a shopper tends...such as the mileage, the number of passengers that can fit in the car, and the year the car was manufactured . The number of hidden nodes are...technology weapons that are inexpensive to manufacture and do not require extensive training to deploy. An improvised explosive device (IED) 28 is a

Fused filament 3D printing of ionic polymer-metal composites for soft robotics

NASA Astrophysics Data System (ADS)

Carrico, James D.; Leang, Kam K.

2017-04-01

Additive manufacturing techniques are used to create three-dimensional structures with complex shapes and features from polymer and/or metal materials. For example, fused filament three-dimensional (3D) printing utilizes non-electroactive polymers, such as acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA), to build structures and components in a layer-by-layer fashion for a wide variety of applications. Presented here is a summary of recent work on a fused filament 3D-printing technique to create 3D ionic polymer-metal composite (IPMC) structures for applications in soft robotics. The 3D printing technique overcomes some of the limitations of existing manufacturing processes for creating IPMCs, such as limited shapes and sizes and time-consuming manufacturing steps. In the process described, first a precursor material (non-acid Nafion precursor resin) is extruded into a thermoplastic filament for 3D printing. Then, a custom-designed 3D printer is described that utilizes the precursor filament to manufacture custom-shaped structures. Finally, the 3D-printed samples are functionalized by hydrolyzing them in an aqueous solution of potassium hydroxide and dimethyl sulfoxide, followed by application of platinum electrodes. Presented are example 3D-printed single and multi-degree-of-freedom IPMC actuators and characterization results, as well as example soft-robotic devices to demonstrate the potential of this process.

AutoMOPS- B2B and B2C in mask making: Mask manufacturing performance and customer satisfaction improvement through better information flow management using generic models and standardized languages

NASA Astrophysics Data System (ADS)

Filies, Olaf; de Ridder, Luc; Rodriguez, Ben; Kujiken, Aart

2002-03-01

Semiconductor manufacturing has become a global business, in which companies of different size unite in virtual enterprises to meet new opportunities. Therefore Mask manufacturing is a key business, but mask ordering is a complex process and is always critical regarding design to market time, even though mask complexity and customer base are increasing using a wide variety of different mask order forms which are frequently faulty and very seldom complete. This is effectively blocking agile manufacturing and can tie wafer fabs to a single mask The goal of the project is elimination of the order verification through paperless, electronically linked information sharing/exchange between chip design, mask production and production stages, which will allow automation of the mask preparation. To cover these new techniques and their specifications as well as the common ones with automated tools a special generic Meta-model will be generated, based on the current standards for mask specifications, including the requirements from the involved partners (Alcatel Microelectronics, Altis, Compugraphics, Infineon, Nimble, Sigma-C), the project works out a pre-normative standard. The paper presents the current status of work. This work is partly funded by the Commission of the European Union under the Fifth Framework project IST-1999-10332 AutoMOPS.

Assessing the use of an infrared spectrum hyperpixel array imager to measure temperature during additive and subtractive manufacturing

NASA Astrophysics Data System (ADS)

Whitenton, Eric; Heigel, Jarred; Lane, Brandon; Moylan, Shawn

2016-05-01

Accurate non-contact temperature measurement is important to optimize manufacturing processes. This applies to both additive (3D printing) and subtractive (material removal by machining) manufacturing. Performing accurate single wavelength thermography suffers numerous challenges. A potential alternative is hyperpixel array hyperspectral imaging. Focusing on metals, this paper discusses issues involved such as unknown or changing emissivity, inaccurate greybody assumptions, motion blur, and size of source effects. The algorithm which converts measured thermal spectra to emissivity and temperature uses a customized multistep non-linear equation solver to determine the best-fit emission curve. Emissivity dependence on wavelength may be assumed uniform or have a relationship typical for metals. The custom software displays residuals for intensity, temperature, and emissivity to gauge the correctness of the greybody assumption. Initial results are shown from a laser powder-bed fusion additive process, as well as a machining process. In addition, the effects of motion blur are analyzed, which occurs in both additive and subtractive manufacturing processes. In a laser powder-bed fusion additive process, the scanning laser causes the melt pool to move rapidly, causing a motion blur-like effect. In machining, measuring temperature of the rapidly moving chip is a desirable goal to develop and validate simulations of the cutting process. A moving slit target is imaged to characterize how the measured temperature values are affected by motion of a measured target.

Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

NASA Technical Reports Server (NTRS)

Vickers, John; Fikes, John

2015-01-01

The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

19 CFR 111.31 - Conflict of interest.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Conflict of interest. 111.31 Section 111.31 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.31 Conflict of interest. (a...

19 CFR 111.67 - Hearing.

Code of Federal Regulations, 2013 CFR

2013-04-01

... oaths for general purposes or in customs matters. The other party to the hearing will be given a... 19 Customs Duties 1 2013-04-01 2013-04-01 false Hearing. 111.67 Section 111.67 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS...

19 CFR 111.32 - False information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false False information. 111.32 Section 111.32 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.32 False information. A broker must...

19 CFR 111.31 - Conflict of interest.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Conflict of interest. 111.31 Section 111.31 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.31 Conflict of interest. (a...

19 CFR 111.34 - Undue influence upon Department of Homeland Security employees.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Undue influence upon Department of Homeland Security employees. 111.34 Section 111.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs...

19 CFR 111.34 - Undue influence upon Department of Homeland Security employees.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Undue influence upon Department of Homeland Security employees. 111.34 Section 111.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs...

19 CFR 111.34 - Undue influence upon Department of Homeland Security employees.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Undue influence upon Department of Homeland Security employees. 111.34 Section 111.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs...

19 CFR 111.31 - Conflict of interest.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Conflict of interest. 111.31 Section 111.31 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.31 Conflict of interest. (a...

19 CFR 111.67 - Hearing.

Code of Federal Regulations, 2014 CFR

2014-04-01

... oaths for general purposes or in customs matters. The other party to the hearing will be given a... 19 Customs Duties 1 2014-04-01 2014-04-01 false Hearing. 111.67 Section 111.67 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS...

19 CFR 111.32 - False information.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false False information. 111.32 Section 111.32 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.32 False information. A broker must...

19 CFR 111.34 - Undue influence upon Department of Homeland Security employees.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Undue influence upon Department of Homeland Security employees. 111.34 Section 111.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs...

19 CFR 111.31 - Conflict of interest.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Conflict of interest. 111.31 Section 111.31 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.31 Conflict of interest. (a...

19 CFR 111.32 - False information.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false False information. 111.32 Section 111.32 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.32 False information. A broker must...

19 CFR 111.67 - Hearing.

Code of Federal Regulations, 2012 CFR

2012-04-01

... oaths for general purposes or in customs matters. The other party to the hearing will be given a... 19 Customs Duties 1 2012-04-01 2012-04-01 false Hearing. 111.67 Section 111.67 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS...

19 CFR 111.32 - False information.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false False information. 111.32 Section 111.32 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.32 False information. A broker must...

19 CFR 111.34 - Undue influence upon Department of Homeland Security employees.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Undue influence upon Department of Homeland Security employees. 111.34 Section 111.34 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs...

12 CFR 13.5 - Customer information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Customer information. 13.5 Section 13.5 Banks... PRACTICES § 13.5 Customer information. Prior to the execution of a transaction recommended to a non... obtain information concerning: (a) The customer's financial status; (b) The customer's tax status; (c...

41 CFR 101-28.303 - Benefits provided by customer supply centers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... customer supply centers. 101-28.303 Section 101-28.303 Public Contracts and Property Management Federal...-STORAGE AND DISTRIBUTION 28.3-Customer Supply Centers § 101-28.303 Benefits provided by customer supply centers. The customer supply centers (CSCs) provide the following: (a) Overall savings to the Federal...

19 CFR 111.31 - Conflict of interest.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Conflict of interest. 111.31 Section 111.31 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.31 Conflict of interest. (a...

17 CFR 160.5 - Annual privacy notice to customers required.

Code of Federal Regulations, 2010 CFR

2010-04-01

... life of the customer relationship. Annually means at least once in any period of 12 consecutive months... customer by December 31 of year 2. (b)(1) Termination of customer relationship. You are not required to... customers required. 160.5 Section 160.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING...

78 FR 48458 - Notice of Reinstatement of Customs Broker License

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Notice of Reinstatement of Customs Broker License AGENCY: U.S. Customs and Border Protection, Department of Homeland Security. ACTION...) on December 6, 2012, U.S. Customs and Border Protection, pursuant to section 641 of the Tariff Act of...

19 CFR 151.54 - Testing by Customs laboratory.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Testing by Customs laboratory. 151.54 Section 151... Other Metal-Bearing Materials § 151.54 Testing by Customs laboratory. Samples taken in accordance with § 151.52 shall be promptly forwarded to the appropriate Customs laboratory for testing in accordance...

Integrating sentiment analysis and term associations with geo-temporal visualizations on customer feedback streams

NASA Astrophysics Data System (ADS)

Hao, Ming; Rohrdantz, Christian; Janetzko, Halldór; Keim, Daniel; Dayal, Umeshwar; Haug, Lars-Erik; Hsu, Mei-Chun

2012-01-01

Twitter currently receives over 190 million tweets (small text-based Web posts) and manufacturing companies receive over 10 thousand web product surveys a day, in which people share their thoughts regarding a wide range of products and their features. A large number of tweets and customer surveys include opinions about products and services. However, with Twitter being a relatively new phenomenon, these tweets are underutilized as a source for determining customer sentiments. To explore high-volume customer feedback streams, we integrate three time series-based visual analysis techniques: (1) feature-based sentiment analysis that extracts, measures, and maps customer feedback; (2) a novel idea of term associations that identify attributes, verbs, and adjectives frequently occurring together; and (3) new pixel cell-based sentiment calendars, geo-temporal map visualizations and self-organizing maps to identify co-occurring and influential opinions. We have combined these techniques into a well-fitted solution for an effective analysis of large customer feedback streams such as for movie reviews (e.g., Kung-Fu Panda) or web surveys (buyers).

The CE marking in the dimension stone sector: difficulties, contradictions, possible solutions

NASA Astrophysics Data System (ADS)

Primavori, Piero

2017-04-01

In accordance with the requirements of the CPR 305/11, no stone products (covered by harmonized standards) can be introduced in the EU market, irrespective of their country of origin, unless they are supported with a Declaration of Performance (DoP) and CE certificate (= CE Marking). The CE marking became compulsory for all stone and marble products as early as 2003, under the legal framework of the CPD 89/106/CE, the EU Directive which, on July 1st, 2013, has been officially replaced by the CPR 305/11. The CE Marking of construction products has been described as one of the most significant change being faced by the construction industry for a decade. Nevertheless, after thirteen years from the introduction of the first products standard, serious difficulties for the CE Marking application still exist. The aim of this contribution is to draw the attention on the effective meaningfulness, applicability and reliability of the CE Marking, on the related aspects for the economic operators (manufacturers, authorized representatives, importers, distributors etc.) and, most of all, for the customers. The following topics and issues are dealt with: - Criteria of the mandatory tests; - Criteria for testing procedures (meaningfulness/reliability/frequency of the TT); - Non-applicability of the testing methods in particular circumstances; - Economic aspects for the companies; - Interpretation of the FPC philosophy; - Formulation of the finished products standards; - Traceability criteria of the stone material; - Threshold-values for the acceptance of a stone material; - Guarantees for the manufacturers and for the customers; - Effective precision and reliability of the DoP and related consequences for manufacturers and customers.

Manufacturing Bms/Iso System Review

NASA Technical Reports Server (NTRS)

Gomez, Yazmin

2004-01-01

The Quality Management System (QMS) is one that recognizes the need to continuously change and improve an organization s products and services as determined by system feedback, and corresponding management decisions. The purpose of a Quality Management System is to minimize quality variability of an organization's products and services. The optimal Quality Management System balances the need for an organization to maintain flexibility in the products and services it provides with the need for providing the appropriate level of discipline and control over the processes used to provide them. The goal of a Quality Management System is to ensure the quality of the products and services while consistently (through minimizing quality variability) meeting or exceeding customer expectations. The GRC Business Management System (BMS) is the foundation of the Center's ISO 9001:2000 registered quality system. ISO 9001 is a quality system model developed by the International Organization for Standardization. BMS supports and promote the Glenn Research Center Quality Policy and wants to ensure the customer satisfaction while also meeting quality standards. My assignment during this summer is to examine the manufacturing processes used to develop research hardware, which in most cases are one of a kind hardware, made with non conventional equipment and materials. During this process of observation I will make a determination, based on my observations of the hardware development processes the best way to meet customer requirements and at the same time achieve the GRC quality standards. The purpose of my task is to review the manufacturing processes identifying opportunities in which to optimize the efficiency of the processes and establish a plan for implementation and continuous improvement.

Lean consumption.

PubMed

Womack, James P; Jones, Daniel T

2005-03-01

During the past 20 years, the real price of most consumer goods has fallen worldwide, the variety of goods and the range of sales channels offering them have continued to grow, and product quality has steadily improved. So why is consumption often so frustrating? It doesn't have to be--and shouldn't be--the authors say. They argue that it's time to apply lean thinking to the processes of consumption--to give consumers the full value they want from goods and services with the greatest efficiency and the least pain. Companies may think they save time and money by off-loading work to the consumer but, in fact, the opposite is true. By streamlining their systems for providing goods and services, and by making it easier for customers to buy and use those products and services, a growing number of companies are actually lowering costs while saving everyone time. In the process, these businesses are learning more about their customers, strengthening consumer loyalty, and attracting new customers who are defecting from less user-friendly competitors. The challenge lies with the retailers, service providers, manufacturers, and suppliers that are not used to looking at total cost from the standpoint of the consumer and even less accustomed to working with customers to optimize the consumption process. Lean consumption requires a fundamental shift in the way companies think about the relationship between provision and consumption, and the role their customers play in these processes. It also requires consumers to change the nature of their relationships with the companies they patronize. Lean production has clearly triumphed over similar obstacles in recent years to become the dominant global manufacturing model. Lean consumption, its logical companion, can't be far behind.

How to sell services more profitably.

PubMed

Reinartz, Werner; Ulaga, Wolfgang

2008-05-01

When products become commodities, manufacturing companies may seek to differentiate themselves with value-added services--a potentially profitable strategy. Unfortunately, companies often stumble in the effort. Reinartz and Ulaga conducted in-depth studies of 18 leading companies in a broad variety of product markets to learn what distinguished the successes from the rest. They discovered four steps to developing a profitable services capability. RECOGNIZE THAT YOU ALREADY HAVE A SERVICE COMPANY: You can identify and charge for simple services--as Merck did when it stopped quietly absorbing shipping costs. Switching services from free to fee clarifies their value for managers as well as for customers. INDUSTRIALIZE THE BACK OFFICE: To prevent delivery costs from eating up service-offering margins, build flexible service platforms, closely monitor process costs, and exploit new technologies that enable process innovations. The Swedish bearings manufacturer SKF provided off-site access to an online monitoring tool that could warn of potential failure in customers' machines. CREATE A SERVICE-SAVVY SALES FORCE: Services require longer sales cycles and, often, decisions from high up in a customer's hierarchy; what's more, product salespeople may be inimical to change. Schneider-Electric did a major overhaul of its sales organization and trained its people to switch from cost-plus pricing to value-based pricing. FOCUS ON CUSTOMERS' PROCESSES AND THE OPPORTUNITIES THEY AFFORD FOR NEW SERVICE OFFERINGS: You may need to acquire new capabilities to take advantage of those opportunities: The industrial coatings specialist PPG had to learn how painting robots function after it offered to take over Fiat's Torino paint shop. Services can both lock in customers and help acquire new accounts. They should be developed with care and attention.

Computer-assisted generation of individual training concepts for advanced education in manufacturing metrology

NASA Astrophysics Data System (ADS)

Werner, Teresa; Weckenmann, Albert

2010-05-01

Due to increasing requirements on the accuracy and reproducibility of measurement results together with a rapid development of novel technologies for the execution of measurements, there is a high demand for adequately qualified metrologists. Accordingly, a variety of training offers are provided by machine manufacturers, universities and other institutions. Yet, for an interested learner it is very difficult to define an optimal training schedule for his/her individual demands. Therefore, a computer-based assistance tool is developed to support a demand-responsive scheduling of training. Based on the difference between the actual and intended competence profile and under consideration of amending requirements, an optimally customized qualification concept is derived. For this, available training offers are categorized according to different dimensions: regarding contents of the course, but also intended target groups, focus of the imparted competences, implemented methods of learning and teaching, expected constraints for learning and necessary preknowledge. After completing a course, the achieved competences and the transferability of gathered knowledge are evaluated. Based on the results, recommendations for amending measures of learning are provided. Thus, a customized qualification for manufacturing metrology is facilitated, adapted to the specific needs and constraints of each individual learner.

Simple laser vision sensor calibration for surface profiling applications

NASA Astrophysics Data System (ADS)

Abu-Nabah, Bassam A.; ElSoussi, Adnane O.; Al Alami, Abed ElRahman K.

2016-09-01

Due to the relatively large structures in the Oil and Gas industry, original equipment manufacturers (OEMs) have been implementing custom-designed laser vision sensor (LVS) surface profiling systems as part of quality control in their manufacturing processes. The rough manufacturing environment and the continuous movement and misalignment of these custom-designed tools adversely affect the accuracy of laser-based vision surface profiling applications. Accordingly, Oil and Gas businesses have been raising the demand from the OEMs to implement practical and robust LVS calibration techniques prior to running any visual inspections. This effort introduces an LVS calibration technique representing a simplified version of two known calibration techniques, which are commonly implemented to obtain a calibrated LVS system for surface profiling applications. Both calibration techniques are implemented virtually and experimentally to scan simulated and three-dimensional (3D) printed features of known profiles, respectively. Scanned data is transformed from the camera frame to points in the world coordinate system and compared with the input profiles to validate the introduced calibration technique capability against the more complex approach and preliminarily assess the measurement technique for weld profiling applications. Moreover, the sensitivity to stand-off distances is analyzed to illustrate the practicality of the presented technique.

Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing.

PubMed

Jardini, André Luiz; Larosa, Maria Aparecida; Maciel Filho, Rubens; Zavaglia, Cecília Amélia de Carvalho; Bernardes, Luis Fernando; Lambert, Carlos Salles; Calderoni, Davi Reis; Kharmandayan, Paulo

2014-12-01

Additive manufacturing (AM) technology from engineering has helped to achieve several advances in the medical field, particularly as far as fabrication of implants is concerned. The use of AM has made it possible to carry out surgical planning and simulation using a three-dimensional physical model which accurately represents the patient's anatomy. AM technology enables the production of models and implants directly from a 3D virtual model, facilitating surgical procedures and reducing risks. Furthermore, AM has been used to produce implants designed for individual patients in areas of medicine such as craniomaxillofacial surgery, with optimal size, shape and mechanical properties. This work presents AM technologies which were applied to design and fabricate a biomodel and customized implant for the surgical reconstruction of a large cranial defect. A series of computed tomography data was obtained and software was used to extract the cranial geometry. The protocol presented was used to create an anatomic biomodel of the bone defect for surgical planning and, finally, the design and manufacture of the patient-specific implant. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Materials for a new generation of vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grobstein, T.

1995-12-31

The Partnership for a New Generation of Vehicles (PNGV) is a national initiative with three goals: first, to significantly improve national competitiveness in manufacturing; second, to implement commercially viable innovations from ongoing research on conventional vehicles, and third, to develop a vehicle to achieve up to three times the fuel efficiency of today`s comparable vehicle (i.e., the 1994 Chrysler Concorde, Ford Taurus, and Chevrolet Lumina). Note this vehicle will have the equivalent customer purchase price of today`s vehicles adjusted for economics, while meeting the customers` needs for quality, performance, and utility. Eight federal agencies are currently contributing to these goals,more » as well as the three principal US automobile manufacturers, numerous automotive component suppliers, research laboratories, and universities. Materials research and development is a significant effort within PNGV. The goals in this area include development of lightweight, recyclable materials for structural applications, high strength, long-life, high temperature materials for engine components, improved materials for alternative propulsion and energy storage systems, and cost-effective process technologies and component fabrication methods. Application of advanced materials to automobiles will involve consideration of diverse factors, including weight savings, affordability, recyclability, crashworthiness, repairability, and manufacturability.« less

Characterization of domestic and foreign image intensifier tubes

NASA Astrophysics Data System (ADS)

Bender, Edward J.; Wood, Michael V.; Hosek, Daniel J.; Hart, Steve D.

2013-06-01

The market for military-use Generation 2 and Generation 3 image intensifier (I2) tubes has become truly global, with major manufacturers and customers spanning five continents. This worldwide market is becoming increasingly important to U.S. manufacturers, with the majority of U.S. Army intensifier fielding having been completed in 2012. Given this keen global competition, it is not surprising that the advertised tube performance of a given source is often discounted by competitors, and the customers have no objective "honest broker" to determine the relative accuracy of these claims. To help fill this void, the U.S. Army RDECOM CERDEC NVESD recently measured a number of domestic and foreign image intensifier tubes, using consistent test equipment/procedures with which the U.S. industry must correlate for Army tube deliveries. Data and analysis will be presented for the major tube parameters of luminance gain, equivalent background input (EBI), signal-to-noise ratio (SNR), limiting resolution, halo, and modulation transfer function (MTF). The bright-light resolution provided by various auto-gated and non-gated tubes will also be addressed, since this area has been an important factor in the international market. RDECOM CERDEC NVESD measurement data will be compared to the corresponding manufacturer specifications whenever possible.

The Customer Flow Toolkit: A Framework for Designing High Quality Customer Services.

ERIC Educational Resources Information Center

New York Association of Training and Employment Professionals, Albany.

This document presents a toolkit to assist staff involved in the design and development of New York's one-stop system. Section 1 describes the preplanning issues to be addressed and the intended outcomes that serve as the framework for creation of the customer flow toolkit. Section 2 outlines the following strategies to assist in designing local…

26 CFR 301.6103(l)(14)-1 - Disclosure of return information to United States Customs Service.

Code of Federal Regulations, 2010 CFR

2010-04-01

... States Customs Service. 301.6103(l)(14)-1 Section 301.6103(l)(14)-1 Internal Revenue INTERNAL REVENUE... Information and Returns Returns and Records § 301.6103(l)(14)-1 Disclosure of return information to United States Customs Service. (a) General rule. Pursuant to the provisions of section 6103(l)(14) of the...

12 CFR 332.10 - Limits on disclosure of non-public personal information to nonaffiliated third parties.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer have established a customer relationship. (2) Unless you comply with this section, you may not... means. A customer opens an on-line account with you and agrees to receive the notices required in paragraph (a)(1) of this section electronically, and you allow the customer to opt out by any reasonable...

12 CFR 216.10 - Limits on disclosure of non-public personal information to nonaffiliated third parties.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer have established a customer relationship. (2) Unless you comply with this section, you may not... means. A customer opens an on-line account with you and agrees to receive the notices required in paragraph (a)(1) of this section electronically, and you allow the customer to opt out by any reasonable...

16 CFR 313.10 - Limits on disclosure of non-public personal information to nonaffiliated third parties.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumer have established a customer relationship (2) Unless you comply with this section, you may not... means. A customer opens an on-line account with you and agrees to receive the notices required in paragraph (a)(1) of this section electronically, and you allow the customer to opt out by any reasonable...

12 CFR 40.10 - Limits on disclosure of non-public personal information to nonaffiliated third parties.

Code of Federal Regulations, 2010 CFR

2010-01-01

... established a customer relationship. (2) Unless a bank complies with this section, the bank may not, directly... within 30 days from the date the bank mailed the notices. (ii) By electronic means. A customer opens an... section electronically, and the bank allows the customer to opt out by any reasonable means within 30 days...

75 FR 20647 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

... Relating to Chapter V, Section 7 (Customer Orders and Order Flow Providers) Date: April 13, 2010. Pursuant... 17 (Customer Orders and Order Flow Providers) of the Rules of the Boston Options Exchange Group, LLC... Exchange is proposing to amend Chapter V, Section 17 (Customer Orders and Order Flow Providers) of the BOX...

77 FR 24988 - Manufacturer of Controlled Substances; Notice of Registration; Johnson Matthey Pharma Services

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... distributed to the company's customers. No comments or objections have been received. DEA has considered the... physical security systems, verification of the company's compliance with state and local laws, and a review...

40 CFR Appendix A to Subpart II of... - VOC Data Sheet 1

Code of Federal Regulations, 2013 CFR

2013-07-01

... supplied” by the manufacturer. Properties of the coating as supplied 1 to the customer: A. Coating Density... (nonvolatiles) 2. __ g/L coating (less water and exempt compounds) G. Thinner Density: Dth __ g/L ASTM...

40 CFR Appendix A to Subpart II of... - VOC Data Sheet 1

Code of Federal Regulations, 2011 CFR

2011-07-01

... supplied” by the manufacturer. Properties of the coating as supplied 1 to the customer: A. Coating Density... (nonvolatiles) 2. __ g/L coating (less water and exempt compounds) G. Thinner Density: Dth __ g/L ASTM...

Product development cycle time reduction

NASA Astrophysics Data System (ADS)

Farran, Robin

1992-05-01

We are facing here today the key issues that face us in the competitive environment. North American companies are struggling to compete in the global marketplace. Gone are the days when presence ensured success. Then, sales and earnings were guaranteed. Today the competition is intense. Many manufacturing and service companies are no longer competitive. Traditionally, manufacturing companies have created the most wealth for the community and economy. Losing this ability to create wealth is tragic and unnecessary. A company can only be successful by focusing on customer satisfaction at competitive costs. Revenue growth and earnings growth require a continuous stream of products that anticipate the customers' needs, result from shorter and shorter innovation cycles, continually improve in quality, and are produced at improved costs on each cycle. The best opportunities for increased quality and decreased costs are with new products. Sure, work on quality and costs everyday. The biggest changes, however, will come through the new product development cycle. We must improve our development processes to provide leadership products which result in high levels of customer satisfaction. This is a prerequisite for business success. When presence in the marketplace was a virtual guarantee of success for a North American company, technology tended to drive the products, and the customers bought virtually everything that was produced. Functional excellence was stressed within companies ... and that was enough. Effective planning processes were not a prerequisite for success. Today success demands highly developed business research and planning processes, and functional excellence combined with organizational capabilities that ensure commercialization excellence.

Breaking the trade-off between efficiency and service.

PubMed

Frei, Frances X

2006-11-01

For manufacturers, customers are the open wallets at the end of the supply chain. But for most service businesses, they are key inputs to the production process. Customers introduce tremendous variability to that process, but they also complain about any lack of consistency and don't care about the company's profit agenda. Managing customer-introduced variability, the author argues, is a central challenge for service companies. The first step is to diagnose which type of variability is causing mischief: Customers may arrive at different times, request different kinds of service, possess different capabilities, make varying degrees of effort, and have different personal preferences. Should companies accommodate variability or reduce it? Accommodation often involves asking employees to compensate for the variations among customers--a potentially costly solution. Reduction often means offering a limited menu of options, which may drive customers away. Some companies have learned to deal with customer-introduced variability without damaging either their operating environments or customers' service experiences. Starbucks, for example, handles capability variability among its customers by teaching them the correct ordering protocol. Dell deals with arrival and request variability in its high-end server business by outsourcing customer service while staying in close touch with customers to discuss their needs and assess their experiences with third-party providers. The effective management of variability often requires a company to influence customers' behavior. Managers attempting that kind of intervention can follow a three-step process: diagnosing the behavioral problem, designing an operating role for customers that creates new value for both parties, and testing and refining approaches for influencing behavior.

22 CFR 127.4 - Authority of U.S. Immigration and Customs Enforcement and U.S. Customs and Border Protection...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Authority of U.S. Immigration and Customs Enforcement and U.S. Customs and Border Protection officers. 127.4 Section 127.4 Foreign Relations DEPARTMENT.... Immigration and Customs Enforcement and U.S. Customs and Border Protection officers. (a) U.S. Immigration and...

22 CFR 127.4 - Authority of U.S. Immigration and Customs Enforcement and U.S. Customs and Border Protection...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Authority of U.S. Immigration and Customs Enforcement and U.S. Customs and Border Protection officers. 127.4 Section 127.4 Foreign Relations DEPARTMENT.... Immigration and Customs Enforcement and U.S. Customs and Border Protection officers. (a) U.S. Immigration and...

22 CFR 127.4 - Authority of U.S. Immigration and Customs Enforcement and U.S. Customs and Border Protection...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Authority of U.S. Immigration and Customs Enforcement and U.S. Customs and Border Protection officers. 127.4 Section 127.4 Foreign Relations DEPARTMENT.... Immigration and Customs Enforcement and U.S. Customs and Border Protection officers. (a) U.S. Immigration and...

41 CFR 102-85.215 - What if another customer agency forces a GSA customer to move?

Code of Federal Regulations, 2012 CFR

2012-01-01

... agency forces a GSA customer to move? 102-85.215 Section 102-85.215 Public Contracts and Property... PROPERTY 85-PRICING POLICY FOR OCCUPANCY IN GSA SPACE Continued Occupancy, Relocation and Forced Moves § 102-85.215 What if another customer agency forces a GSA customer to move? If a GSA customer agency, or...

41 CFR 102-85.215 - What if another customer agency forces a GSA customer to move?

Code of Federal Regulations, 2011 CFR

2011-01-01

... agency forces a GSA customer to move? 102-85.215 Section 102-85.215 Public Contracts and Property... PROPERTY 85-PRICING POLICY FOR OCCUPANCY IN GSA SPACE Continued Occupancy, Relocation and Forced Moves § 102-85.215 What if another customer agency forces a GSA customer to move? If a GSA customer agency, or...

41 CFR 102-85.215 - What if another customer agency forces a GSA customer to move?

Code of Federal Regulations, 2013 CFR

2013-07-01

... agency forces a GSA customer to move? 102-85.215 Section 102-85.215 Public Contracts and Property... PROPERTY 85-PRICING POLICY FOR OCCUPANCY IN GSA SPACE Continued Occupancy, Relocation and Forced Moves § 102-85.215 What if another customer agency forces a GSA customer to move? If a GSA customer agency, or...

19 CFR 18.4a - Containers or road vehicles accepted for transport under customs seal; requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... under customs seal; requirements. 18.4a Section 18.4a Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... General Provisions § 18.4a Containers or road vehicles accepted for transport under customs seal... under Customs seal (see § 18.4) if (i) durably marked with the name and address of the owner...

29 CFR 779.340 - Out-of-State customers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Out-of-State customers. 779.340 Section 779.340 Labor... State § 779.340 Out-of-State customers. Whether the sale or service is made to an out-of-State customer is a question of fact. In order for a customer to be considered an out-of-State customer, some...

47 CFR 32.6623 - Customer services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Customer services. 32.6623 Section 32.6623... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6623 Customer services. (a) This account shall include costs incurred in establishing and servicing customer accounts. This...

7 CFR 1206.4 - Customs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Customs. 1206.4 Section 1206.4 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.4 Customs. Customs means the...

19 CFR 174.24 - Criteria for further review.

Code of Federal Regulations, 2011 CFR

2011-04-01

... upon by the Commissioner of Customs or his designee or by the Customs courts; (c) Involves matters... 19 Customs Duties 2 2011-04-01 2011-04-01 false Criteria for further review. 174.24 Section 174.24 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE...

19 CFR 174.24 - Criteria for further review.

Code of Federal Regulations, 2014 CFR

2014-04-01

... upon by the Commissioner of Customs or his designee or by the Customs courts; (c) Involves matters... 19 Customs Duties 2 2014-04-01 2014-04-01 false Criteria for further review. 174.24 Section 174.24 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE...