Compilation of Case Studies: Exemplary Placement and Follow-Up Studies.

ERIC Educational Resources Information Center

Dale, Jack

Examples of placement and follow-up conceptual models developed for a program of vocational education (kindergarten through university) are presented. Section 1 contains a historical overview of placement and follow-up activities in Florida and describes a comprehensive model. Section 2, describing a model for utilizing community resources for the…

26 CFR 31.3121(b)(8)-1 - Services performed by a minister of a church or a member of a religious order.

Code of Federal Regulations, 2012 CFR

2012-04-01

... rule in paragraph (b)(3)(i) of this section may be illustrated by the following example: Example. M, a... paragraph (b)(4)(i) of this section may be illustrated by the following example: Example. M, a duly ordained...)(i) of this section may be illustrated by the following example: Example. M, a duly ordained minister...

Radar observation of known and unknown clear echoes

NASA Technical Reports Server (NTRS)

Glover, K. M.; Konrad, T. G.

1979-01-01

Target cross-section as a function of wavelength for known insects, known bird, and dot targets is presented. Tracking data using the time series analysis was tabulated for known birds. Examples were selected from these early works to give entomologists some indication of the types of information that are available by radar as well as examples of the different sources of clear-air radar backscatter.

Evaluation of fusion-evaporation cross-section calculations

NASA Astrophysics Data System (ADS)

Blank, B.; Canchel, G.; Seis, F.; Delahaye, P.

2018-02-01

Calculated fusion-evaporation cross sections from five different codes are compared to experimental data. The present comparison extents over a large range of nuclei and isotopic chains to investigate the evolution of experimental and calculated cross sections. All models more or less overestimate the experimental cross sections. We found reasonable agreement by using the geometrical average of the five model calculations and dividing the average by a factor of 11.2. More refined analyses are made for example for the 100Sn region.

Chemical Processing Manual

NASA Technical Reports Server (NTRS)

Beyerle, F. J.

1972-01-01

Chemical processes presented in this document include cleaning, pickling, surface finishes, chemical milling, plating, dry film lubricants, and polishing. All types of chemical processes applicable to aluminum, for example, are to be found in the aluminum alloy section. There is a separate section for each category of metallic alloy plus a section for non-metals, such as plastics. The refractories, super-alloys and titanium, are prime candidates for the space shuttle, therefore, the chemical processes applicable to these alloys are contained in individual sections of this manual.

Description and calibration of the Langley unitary plan wind tunnel

NASA Technical Reports Server (NTRS)

Jackson, C. M., Jr.; Corlett, W. A.; Monta, W. J.

1981-01-01

The two test sections of the Langley Unitary Plan Wind Tunnel were calibrated over the operating Mach number range from 1.47 to 4.63. The results of the calibration are presented along with a a description of the facility and its operational capability. The calibrations include Mach number and flow angularity distributions in both test sections at selected Mach numbers and tunnel stagnation pressures. Calibration data are also presented on turbulence, test-section boundary layer characteristics, moisture effects, blockage, and stagnation-temperature distributions. The facility is described in detail including dimensions and capacities where appropriate, and example of special test capabilities are presented. The operating parameters are fully defined and the power consumption characteristics are discussed.

26 CFR 1.826-7 - Examples.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Examples. 1.826-7 Section 1.826-7 Internal....826-7 Examples. The application of section 826 may be illustrated by the following examples: Example 1... percent of 8 exceeds 25 percent of 0), may remain in such account beyond the taxable year 1968. Example 2...

Ecological risk assessment conceptual model formulation for nonindigenous species.

PubMed

Landis, Wayne G

2004-08-01

This article addresses the application of ecological risk assessment at the regional scale to the prediction of impacts due to invasive or nonindigenous species (NIS). The first section describes risk assessment, the decision-making process, and introduces regional risk assessment. A general conceptual model for the risk assessment of NIS is then presented based upon the regional risk assessment approach. Two diverse examples of the application of this approach are presented. The first example is based upon the dynamics of introduced plasmids into bacteria populations. The second example is the application risk assessment approach to the invasion of a coastal marine site of Cherry Point, Washington, USA by the European green crab. The lessons learned from the two examples demonstrate that assessment of the risks of invasion of NIS will have to incorporate not only the characteristics of the invasive species, but also the other stresses and impacts affecting the region of interest.

Some applications of categorical data analysis to epidemiological studies.

PubMed Central

Grizzle, J E; Koch, G G

1979-01-01

Several examples of categorized data from epidemiological studies are analyzed to illustrate that more informative analysis than tests of independence can be performed by fitting models. All of the analyses fit into a unified conceptual framework that can be performed by weighted least squares. The methods presented show how to calculate point estimate of parameters, asymptotic variances, and asymptotically valid chi 2 tests. The examples presented are analysis of relative risks estimated from several 2 x 2 tables, analysis of selected features of life tables, construction of synthetic life tables from cross-sectional studies, and analysis of dose-response curves. PMID:540590

A Reply to the Commentaries on "School-wide PBIS: An Example of Applied Behavior Analysis Implemented at a Scale of Social Importance" by Horner and Sugai (2015): PBIS is Function over Form: The Clear Behavioral Roots and Opportunities the PBIS Framework presents to the Field of Behavior Analysis Moving Forward.

PubMed

Putnam, Robert F; Knoster, Tim

2016-03-01

In the previous issue of Behavior Analysis in Practice (May 2015), a special section of the journal was devoted to positive behavior intervention and support (PBIS). Horner and Sugai (2015) published a manuscript providing an overview of school-wide PBIS describing how PBIS is an example of applied behavior analysis at a scale of social importance. A number of manuscripts providing commentary on the Horner and Sugai manuscript were also published in this special section of the journal. This paper will review this PBIS manuscript along with the associated commentaries published in the May 2015 special section.

49 CFR 24.208 - Aliens not lawfully present in the United States.

Code of Federal Regulations, 2011 CFR

2011-10-01

... pursuant to paragraph (a) of this section shall be conducted in a nondiscriminatory fashion. Each... invalid (for example a document reviewed does not on its face reasonably appear to be genuine), and that...

49 CFR 24.208 - Aliens not lawfully present in the United States.

Code of Federal Regulations, 2010 CFR

2010-10-01

... pursuant to paragraph (a) of this section shall be conducted in a nondiscriminatory fashion. Each... invalid (for example a document reviewed does not on its face reasonably appear to be genuine), and that...

26 CFR 25.2512-5 - Valuation of annuities, unitrust interests, interests for life or term of years, and remainder or...

Code of Federal Regulations, 2010 CFR

2010-04-01

... transferred by gift is the present value of the interests determined under paragraph (d) of this section... standard actuarial factors and examples that illustrate how to use the tables to compute the present value... and special actuarial factors that may be necessary to compute the present value of similar interests...

Telemedicine: history, applications, and impact on librarianship.

PubMed Central

Zundel, K M

1996-01-01

This paper traces the uses of telecommunications in health care from the Civil War era to the present. Topics include the National Aeronautics and Space Administration's involvement in the origins of current telemedicine systems and the impact of television. Applications of telemedicine discussed include remote consultation and diagnosis, specialty clinical care (including examples from anesthesia, dermatology, cardiology, psychiatry, radiology, critical care, and oncology), and others (including examples of patient education, home monitoring, and continuing education). The concluding section highlights how telemedicine affects health sciences librarianship, beginning with the development of online computerized literature searching. This section also discusses the medical resources available to health sciences librarians as a result of the Internet. PMID:8938332

TMF design considerations in turbine airfoils of advanced turbine engines

NASA Astrophysics Data System (ADS)

Date, C. G.; Zamrik, S. Y.; Adams, J. H.; Frani, N. E.

A review of thermal-mechanicalfatigue (TMF) in advanced turbine engines is presented. The review includes examples of typical thermal-mechnical loadings encountered in the design of hot section blades and vanes. Specific issues related to TMF behavior are presented and the associated impact on component life analysis and design is discussed.

Reaction schemes visualized in network form: the syntheses of strychnine as an example.

PubMed

Proudfoot, John R

2013-05-24

Representation of synthesis sequences in a network form provides an effective method for the comparison of multiple reaction schemes and an opportunity to emphasize features such as reaction scale that are often relegated to experimental sections. An example of data formatting that allows construction of network maps in Cytoscape is presented, along with maps that illustrate the comparison of multiple reaction sequences, comparison of scaffold changes within sequences, and consolidation to highlight common key intermediates used across sequences. The 17 different synthetic routes reported for strychnine are used as an example basis set. The reaction maps presented required a significant data extraction and curation, and a standardized tabular format for reporting reaction information, if applied in a consistent way, could allow the automated combination of reaction information across different sources.

It's OK to Get Smart with Us--We're Your Public Library. A Statewide Multimedia Public Awareness Campaign.

ERIC Educational Resources Information Center

Johnson, Liliane Parbot, Comp.

A 3-year project to generate awareness and utilization of the nontraditional services offered by the Florida public libraries is described. The presentation is divided into two sections: an overview of the program to date and examples from the media campaign. Within section 1, three distinct phases of the project are identified and described:…

26 CFR 1.312-4 - Examples of adjustments provided in section 312(c).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Examples of adjustments provided in section 312... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Effects on Corporation § 1.312-4 Examples of adjustments... examples: Example 1. On December 2, 1954, Corporation X distributed to its sole shareholder, A, an...

Acid Rain Classroom Projects.

ERIC Educational Resources Information Center

Demchik, Michael J.

2000-01-01

Describes a curriculum plan in which students learn about acid rain through instructional media, research and class presentations, lab activities, simulations, design, and design implementation. Describes the simulation activity in detail and includes materials, procedures, instructions, examples, results, and discussion sections. (SAH)

26 CFR 1.904-0 - Outline of regulation provisions for section 904.

Code of Federal Regulations, 2011 CFR

2011-04-01

... post-2002 unused foreign tax paid or accrued with respect to dividends from noncontrolled section 902.... (iii) Interaction with section 954(b)(4). (8) Examples. (d) [Reserved] (e) Financial services income...-through entities. (A) Rule. (B) Examples. (iv) Examples. (4) Definition of incidental income. (i) In...

Cross-Sectional Analysis of Longitudinal Mediation Processes.

PubMed

O'Laughlin, Kristine D; Martin, Monica J; Ferrer, Emilio

2018-01-01

Statistical mediation analysis can help to identify and explain the mechanisms behind psychological processes. Examining a set of variables for mediation effects is a ubiquitous process in the social sciences literature; however, despite evidence suggesting that cross-sectional data can misrepresent the mediation of longitudinal processes, cross-sectional analyses continue to be used in this manner. Alternative longitudinal mediation models, including those rooted in a structural equation modeling framework (cross-lagged panel, latent growth curve, and latent difference score models) are currently available and may provide a better representation of mediation processes for longitudinal data. The purpose of this paper is twofold: first, we provide a comparison of cross-sectional and longitudinal mediation models; second, we advocate using models to evaluate mediation effects that capture the temporal sequence of the process under study. Two separate empirical examples are presented to illustrate differences in the conclusions drawn from cross-sectional and longitudinal mediation analyses. Findings from these examples yielded substantial differences in interpretations between the cross-sectional and longitudinal mediation models considered here. Based on these observations, researchers should use caution when attempting to use cross-sectional data in place of longitudinal data for mediation analyses.

Turning Awareness into Action: What Your Community Can Do about Drug Use in America = De La Toma de Conciencia a la Accion: Que Puede Hacer la Comunidad Respecto al Consumo de Drogas en America.

ERIC Educational Resources Information Center

Alcohol, Drug Abuse, and Mental Health Administration (DHHS/PHS), Rockville, MD. Office for Substance Abuse Prevention.

This booklet gives examples of successful community drug abuse prevention programs, as well as guidelines for finding out more about a community's prevention needs and taking action. The first section discusses taking action against drug abuse. It presents examples which illustrate the different approaches communities have taken. Ten steps to help…

26 CFR 1.663(c)-5 - Examples.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Examples. 1.663(c)-5 Section 1.663(c)-5 Internal... TAXES Estates and Trusts Which May Accumulate Income Or Which Distribute Corpus § 1.663(c)-5 Examples. Section 663(c) may be illustrated by the following examples: Example 1. (i) A single trust was created in...

Linking Semantic and Knowledge Representations in a Multi-Domain Dialogue System

DTIC Science & Technology

2007-06-01

accuracy evaluation presented in the next section shows that the generic version of the grammar performs similarly well on two evaluation domains...of extra insertions; for example, discourse adverbials such as now were inserted if present in the lattice. In addition, different tense and pronoun...automatic lexicon specialization technique improves parser speed and accuracy. 1 Introduction This paper presents an architecture of a language

26 CFR 1.1374-6 - Credits and credit carryforwards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... liability described in section 38(c)(1). The tentative minimum tax described in section 55(b) is determined... 55(b)(2). (c) Examples. The rules of this section are illustrated by the following examples. Example... rules applying to C corporations. Any other credits or credit carryforwards, such as foreign tax credits...

Reservoir studies with geostatistics to forecast performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, R.W.; Behrens, R.A.; Emanuel, A.S.

1991-05-01

In this paper example geostatistics and streamtube applications are presented for waterflood and CO{sub 2} flood in two low-permeability sandstone reservoirs. Thy hybrid approach of combining fine vertical resolution in cross-sectional models with streamtubes resulted in models that showed water channeling and provided realistic performance estimates. Results indicate that the combination of detailed geostatistical cross sections and fine-grid streamtube models offers a systematic approach for realistic performance forecasts.

Visible Languages for Program Visualization

DTIC Science & Technology

1986-02-01

Comments 38 The Presentation of Program Metadata 39 The Spatial Composition of Comments 41 The Typography of Punctuation 42 Typographic Encodings... Typography of Program Punctuation 6. In this example the "" appears in 10 point regular Helvetica type, and thus uses the same typographic parameters as...Results. Conclusions Chapter 4 Graphic Design of C Source Code and Comments Section 4 3 1 he Typography of Punctuation Page 41 l ft. Section

An Undergraduate Computer Science Curriculum for the Hearing Impaired.

ERIC Educational Resources Information Center

Perkins, A. Louise

1995-01-01

Presents an example section from a computer-science-integrated curriculum that was originally based on the Association of Computing Machinery (ACM) 1978 curriculum. The curriculum was designed to allow both instructors and students to move away from teaching and learning facts. (DDR)

A predictive transport modeling code for ICRF-heated tokamaks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, C.K.; Hwang, D.Q.; Houlberg, W.

In this report, a detailed description of the physic included in the WHIST/RAZE package as well as a few illustrative examples of the capabilities of the package will be presented. An in depth analysis of ICRF heating experiments using WHIST/RAZE will be discussed in a forthcoming report. A general overview of philosophy behind the structure of the WHIST/RAZE package, a summary of the features of the WHIST code, and a description of the interface to the RAZE subroutines are presented in section 2 of this report. Details of the physics contained in the RAZE code are examined in section 3.more » Sample results from the package follow in section 4, with concluding remarks and a discussion of possible improvements to the package discussed in section 5.« less

A predictive transport modeling code for ICRF-heated tokamaks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, C.K.; Hwang, D.Q.; Houlberg, W.

1992-02-01

In this report, a detailed description of the physic included in the WHIST/RAZE package as well as a few illustrative examples of the capabilities of the package will be presented. An in depth analysis of ICRF heating experiments using WHIST/RAZE will be discussed in a forthcoming report. A general overview of philosophy behind the structure of the WHIST/RAZE package, a summary of the features of the WHIST code, and a description of the interface to the RAZE subroutines are presented in section 2 of this report. Details of the physics contained in the RAZE code are examined in section 3.more » Sample results from the package follow in section 4, with concluding remarks and a discussion of possible improvements to the package discussed in section 5.« less

Multiple Paths to Mathematics Practice in Al-Kashi's Key to Arithmetic

NASA Astrophysics Data System (ADS)

Taani, Osama

2014-01-01

In this paper, I discuss one of the most distinguishing features of Jamshid al-Kashi's pedagogy from his Key to Arithmetic, a well-known Arabic mathematics textbook from the fifteenth century. This feature is the multiple paths that he includes to find a desired result. In the first section light is shed on al-Kashi's life and his contributions to mathematics and astronomy. Section 2 starts with a brief discussion of the contents and pedagogy of the Key to Arithmetic. Al-Kashi's multiple approaches are discussed through four different examples of his versatility in presenting a topic from multiple perspectives. These examples are multiple definitions, multiple algorithms, multiple formulas, and multiple methods for solving word problems. Section 3 is devoted to some benefits that can be gained by implementing al-Kashi's multiple paths approach in modern curricula. For this discussion, examples from two teaching modules taken from the Key to Arithmetic and implemented in Pre-Calculus and mathematics courses for preservice teachers are discussed. Also, the conclusions are supported by some aspects of these modules. This paper is an attempt to help mathematics educators explore more benefits from reading from original sources.

26 CFR 1.642(h)-5 - Example.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Example. 1.642(h)-5 Section 1.642(h)-5 Internal... TAXES Estates, Trusts, and Beneficiaries § 1.642(h)-5 Example. The application of section 642(h) may be... deductions 14,800 It also has a capital loss of $5,000. (b) Under section 642(h)(1), an unused net operating...

The Cost of Education Index: Measurement of Price Differences of Education Personnel Among New York State School Districts. Working Paper in Education Finance No. 26.

ERIC Educational Resources Information Center

Wendling, Wayne

This report is divided into four sections. Section 1 is a short discussion of the economic theory underlying the construction of the cost of education index and an example of how the index is calculated. Also presented are descriptions of the factors included in the statistical analysis to control for quality, quantity, and cost differences and…

A Beginner's Sequence of Programming Activities.

ERIC Educational Resources Information Center

Slesnick, Twila

1984-01-01

Presents various programing activities using the BASIC and LOGO programing languages. Activities are included in separate sections with a title indicating the nature of the activities and the "tools" (commands) needed. For example, "Old-fashioned drawing" requires several tools (PRINT, LIST, RUN, GOTO) to make drawings using…

Suggested Guide for Fire Service Standard Operating Procedures.

ERIC Educational Resources Information Center

Gillett, Merl; Hertzler, Simon L.

Suggested guidelines for the development of fire service standard operating procedures are presented in this document. Section topics are as follow: chain of command; communications; emergency response; apparatus; fire service training; disaster response; aircraft fire safety; mutual aid; national reporting system (example reporting forms);…

Selling to Industry for Sheltered Workshops.

ERIC Educational Resources Information Center

Rehabilitation Services Administration (DHEW), Washington, DC.

Intended for staffs of sheltered workshops for handicapped individuals, the guide presents a plan for selling the workshop idea to industry, hints on meeting obstacles, and ideas for expanding and upgrading workshop contract promotion. Brief sections cover the following topics (example subtopics are in parentheses): finding work contract prospects…

Science and Technology Libraries Section. Special Libraries Division. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on science and technology library and information services presented at the 1982 International Federation of Library Associations (IFLA) conference include: (1) "The Central Subject Libraries of the Federal Republic of Germany--For Example: The Technische Informationsbibliothek Hannover" by Gerhard Schlitt and Jobst Tehnzen; (2)…

Real-time visualization of cross-sectional data in three dimensions

NASA Technical Reports Server (NTRS)

Mayes, Terrence J.; Foley, Theodore T.; Hamilton, Joseph A.; Duncavage, Tom C.

2005-01-01

This paper describes a technique for viewing and interacting with 2-D medical data in three dimensions. The approach requires little pre-processing, runs on personal computers, and has a wide range of application. Implementation details are discussed, examples are presented, and results are summarized.

Attitudes toward Death in Adolescent Offspring of Holocaust Survivors.

ERIC Educational Resources Information Center

Schneider, Stanley

1978-01-01

This article describes three American adolescents in an Israeli residential treatment program. Biographical data, diagnostic categories, projective test responses, relationships with parents, and some examples of dreams are presented. A final section analyzes some underlying concepts: survivor guilt, repressed aggression, and isolation of affect.…

26 CFR 15a.453-1 - Installment method reporting for sales of real property and casual sales of personal property.

Code of Federal Regulations, 2012 CFR

2012-04-01

... inventories may report the gain on the installment method under section 453. (5) Examples. The following examples illustrate installment method reporting under this section: Example (1). In 1980, A, a calendar... principal is ordinary income to A. Example (2). C sells Whiteacre to D for a selling price of $160,000...

High-Throughput Method of Whole-Brain Sectioning, Using the Tape-Transfer Technique.

PubMed

Pinskiy, Vadim; Jones, Jamie; Tolpygo, Alexander S; Franciotti, Neil; Weber, Kevin; Mitra, Partha P

2015-01-01

Cryostat sectioning is a popular but labor-intensive method for preparing histological brain sections. We have developed a modification of the commercially available CryoJane tape collection method that significantly improves the ease of collection and the final quality of the tissue sections. The key modification involves an array of UVLEDs to achieve uniform polymerization of the glass slide and robust adhesion between the section and slide. This report presents system components and detailed procedural steps, and provides examples of end results; that is, 20 μm mouse brain sections that have been successfully processed for routine Nissl, myelin staining, DAB histochemistry, and fluorescence. The method is also suitable for larger brains, such as rat and monkey.

High-Throughput Method of Whole-Brain Sectioning, Using the Tape-Transfer Technique

PubMed Central

Pinskiy, Vadim; Jones, Jamie; Tolpygo, Alexander S.; Franciotti, Neil; Weber, Kevin; Mitra, Partha P.

2015-01-01

Cryostat sectioning is a popular but labor-intensive method for preparing histological brain sections. We have developed a modification of the commercially available CryoJane tape collection method that significantly improves the ease of collection and the final quality of the tissue sections. The key modification involves an array of UVLEDs to achieve uniform polymerization of the glass slide and robust adhesion between the section and slide. This report presents system components and detailed procedural steps, and provides examples of end results; that is, 20μm mouse brain sections that have been successfully processed for routine Nissl, myelin staining, DAB histochemistry, and fluorescence. The method is also suitable for larger brains, such as rat and monkey. PMID:26181725

IFLA General Conference, 1985. Division of General Research Libraries. Section on Parliamentary Libraries. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on parliamentary libraries which were presented at the 1985 International Federation of Library Associations (IFLA) conference include: (1) "Cooperation among Parliamentary Libraries--Example: Federal Republic of Germany" (Wolfgang Dietz, West Germany); (2) "Cooperative Development in Action: Towards an Australian Parliamentary Information…

Medical and Sociocultural Aspects of Disability. Section III.

ERIC Educational Resources Information Center

Thornhill, Herbert L.; And Others

This document contains four papers, discussing medical and sociocultural aspects of disability, presented at a national conference on the nonwhite disabled. In "Some Observations on Blacks and Physical Disability," Thornhill and Torres note the higher prevalence of physical disability among blacks and cite the example of more frequent lower…

Job Aid Manuals for Phase II--DESIGN of the Instructional Systems Development Model.

ERIC Educational Resources Information Center

Schulz, Russel E.; Farrell, Jean R.

Designed to supplement the descriptive authoring flowcharts presented in a companion volume, this manual includes specific guidance, examples, and other information referred to in the flowcharts for the implementation of the second phase of the Instructional Systems Development Model (ISD). The introductory section includes definitions;…

Guidelines for Writing (or Rewriting) Manuals for Instructional Software.

ERIC Educational Resources Information Center

Litchfield, Brenda C.

1990-01-01

Discusses the need for adequate student user manuals for computer software and presents guidelines to help teachers develop these manuals. The sections that a student manual should contain are outlined, including objectives, pretests and posttests for self-evaluation, and worksheets; and examples are given for further clarification. (LRW)

Labor-Management Cooperation in Schools: An Idea Whose Time Has Come.

ERIC Educational Resources Information Center

Woods-Houston, Michelle; Miller, Rima

This paper presents information useful to educational leaders considering a labor-management cooperation (LMC) process. LMC is a mechanism for changing attitudes and building an atmosphere of trust between two traditionally adversarial groups. The first section outlines categories and provides examples of LMC cooperative efforts, highlighting the…

40 CFR 716.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... underlying data to, a health and safety study. (2) Examples are: (i) Long- and short-term tests of... SAFETY DATA REPORTING General Provisions § 716.3 Definitions. The definitions in section 3 of TSCA apply... chemical substance(s) or mixture(s). Copy of study means the written presentation of the purpose and...

IFLA General Conference, 1984. Special Libraries Division. Section on Science and Technology Libraries. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on scientific/technical information and libraries presented at the 1984 IFLA general conference include: (1) "Library Ethics and the Special Library Network in Science and Technology" (Dieter Schmidmaier, East Germany); (2) "The Dissemination of Patent Information by Libraries: An Example Demonstrating the Necessity of…

Evidence-Based Reading Instruction: Putting the National Reading Panel Report into Practice.

ERIC Educational Resources Information Center

International Reading Association, Newark, DE.

This collection of articles from "The Reading Teacher" provides examples of the instructional practices which improve reading achievement, according to Reading First legislation. Each section offers a summary and discussion of the National Reading Panel Report findings, and presents several articles from "The Reading Teacher"…

26 CFR 1.403(b)-10 - Miscellaneous provisions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... present value of an accrual under a nonqualified defined benefit plan also apply for purposes of... transferred as a continuation of a pro rata portion of the participant's or beneficiary's interest in the section 403(b) plan (for example, a pro rata portion of the participant's or beneficiary's interest in any...

Technology Education in Maine. Curriculum Guide.

ERIC Educational Resources Information Center

Maine State Dept. of Educational and Cultural Services, Augusta. Bureau of Vocational Education.

This curriculum guide presents basic definitions, models, and examples as a framework that individual technology education instructors or departments can use to construct their own units, courses, and curricula at any level. An overview describes the development of the model and the content of technology education. Section I explains technology.…

Job Aid Manuals for Phase III--DEVELOP of the Instructional Systems Development Model.

ERIC Educational Resources Information Center

Schulz, Russel E.; Farrell, Jean R.

Designed to supplement the descriptive authoring flowcharts presented in a companion volume, this manual includes specific guidance, examples, and other information referred to in the flowcharts for the implementation of the third phase of the Instructional Systems Development Model (ISD). The introductory section includes definitions;…

26 CFR 1.904-0 - Outline of regulation provisions for section 904.

Code of Federal Regulations, 2010 CFR

2010-04-01

... carrybacks and carryovers. (h) Transition rules for carryovers and carrybacks of pre-2003 and post-2002.... (iii) Interaction with section 954(b)(4). (8) Examples. (d) [Reserved] (e) Financial services income...-through entities. (A) Rule. (B) Examples. (iv) Examples. (4) Definition of incidental income. (i) In...

Multiple Myeloma Presenting as Massive Amyloid Deposition in a Parathyroid Gland Associated with Amyloid Goiter: A Medullary Thyroid Carcinoma Mimic on Intra-operative Frozen Section.

PubMed

Hill, Kirk; Diaz, Jason; Hagemann, Ian S; Chernock, Rebecca D

2018-06-01

Clinical examples of amyloid deposition in parathyroid glands are exceedingly rare and usually present as an incidental finding in a patient with amyloid goiter. Here, we present the first histologically documented case of parathyroid amyloid deposition that presented as a mass. The patient did not have hyperparathyroidism. The parathyroid gland was submitted for intra-operative frozen section and concern for medullary thyroid carcinoma was raised. An important histologic clue arguing against medullary thyroid carcinoma was the evenly dispersed nature of the amyloid. Histologic perinuclear clearing and parathyroid hormone immunohistochemistry confirmed parathyroid origin on permanent sections. The patient was also found to have associated amyloid goiter. Mass spectrometry of the amyloid showed it to be composed of kappa light chains. On further work-up, the patient was diagnosed with multiple myeloma. Awareness of parathyroid amyloid deposition is important as it is a histologic mimic of medullary thyroid carcinoma, especially on frozen section. Amyloid typing with evaluation for multiple myeloma in any patient with kappa or lambda light chain restriction is also important.

Method for calculating the rolling and yawing moments due to rolling for unswept wings with or without flaps or ailerons by use of nonlinear section lift data

NASA Technical Reports Server (NTRS)

Martina, Albert P

1953-01-01

The methods of NACA Reports 865 and 1090 have been applied to the calculation of the rolling- and yawing-moment coefficients due to rolling for unswept wings with or without flaps or ailerons. The methods allow the use of nonlinear section lift data together with lifting-line theory. Two calculated examples are presented in simplified computing forms in order to illustrate the procedures involved.

29 CFR 784.141 - Examples of nonexempt employees.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Examples of nonexempt employees. 784.141 Section 784.141... Examples of nonexempt employees. An employer who engaged in operations specified in section 13(b)(4) which... business there will ordinarily be, in addition to the employees employed in such named operations, other...

[Anatomia sacra. Religiously motivated interventions on human or animal bodies].

PubMed

Gladigow, B

1995-01-01

Controlled surgery in the interior of human or animal bodies in classical antiquity was allowed only under certain circumstances. Bloody animal sacrifice and its rules for the interpretation of entrails as well as the rare examples of 'ritual anatomy' presented a religious framework for the opening of bodies. Greek mythology provided several examples of medical operations, for example, the Caesarean section, transplantations and plastic surgery. Great cultic significance was given to organ votives or reproductions of human inner organs which were offered in temples ex voto or with request for their curing. The anatomical knowledge transported along with these offerings represents a separate tradition different from the state of anatomical knowledge found in medical literature of the period.

Earthquake ground motion: Chapter 3

USGS Publications Warehouse

Luco, Nicolas; Kircher, Charles A.; Crouse, C. B.; Charney, Finley; Haselton, Curt B.; Baker, Jack W.; Zimmerman, Reid; Hooper, John D.; McVitty, William; Taylor, Andy

2016-01-01

Most of the effort in seismic design of buildings and other structures is focused on structural design. This chapter addresses another key aspect of the design process—characterization of earthquake ground motion into parameters for use in design. Section 3.1 describes the basis of the earthquake ground motion maps in the Provisions and in ASCE 7 (the Standard). Section 3.2 has examples for the determination of ground motion parameters and spectra for use in design. Section 3.3 describes site-specific ground motion requirements and provides example site-specific design and MCER response spectra and example values of site-specific ground motion parameters. Section 3.4 discusses and provides an example for the selection and scaling of ground motion records for use in various types of response history analysis permitted in the Standard.

Generating and Analyzing Visual Representations of Conic Sections with the Use of Technological Tools

ERIC Educational Resources Information Center

Santos-Trigo, Manuel; Espinosa-Perez, Hugo; Reyes-Rodriguez, Aaron

2006-01-01

Technological tools have the potential to offer students the possibility to represent information and relationships embedded in problems and concepts in ways that involve numerical, algebraic, geometric, and visual approaches. In this paper, the authors present and discuss an example in which an initial representation of a mathematical object…

Statistics and Data Interpretation for Social Work

ERIC Educational Resources Information Center

Rosenthal, James A.

2011-01-01

Written by a social worker for social work students, this is a nuts and bolts guide to statistics that presents complex calculations and concepts in clear, easy-to-understand language. It includes numerous examples, data sets, and issues that students will encounter in social work practice. The first section introduces basic concepts and terms to…

Packstock in wilderness: Use, impacts, monitoring, and management

Treesearch

Mitchel P. McClaran; David N. Cole

1993-01-01

Information about packstock use in wilderness in summarized. The results of a survey of managers of all wilderness areas are presented. Sections describe: the amount and composition of packstock use in wilderness, impacts associated with packstock use, methods for monitoring impacts caused by packstock, techniques for managing packstock in wilderness, examples of...

Investigations: Toxic Waste. A Science Curriculum in the Participation Series.

ERIC Educational Resources Information Center

Goldman, Jill S.; And Others

One of a series of teacher-developed curriculum guides designed to encourage student participation and involvement in important social issues, this secondary level guide presents toxic waste as one example of a current issue requiring social action. The first section focuses on the skill of investigating as a means of introducing students to…

Automated acoustic matrix deposition for MALDI sample preparation.

PubMed

Aerni, Hans-Rudolf; Cornett, Dale S; Caprioli, Richard M

2006-02-01

Novel high-throughput sample preparation strategies for MALDI imaging mass spectrometry (IMS) and profiling are presented. An acoustic reagent multispotter was developed to provide improved reproducibility for depositing matrix onto a sample surface, for example, such as a tissue section. The unique design of the acoustic droplet ejector and its optimization for depositing matrix solution are discussed. Since it does not contain a capillary or nozzle for fluid ejection, issues with clogging of these orifices are avoided. Automated matrix deposition provides better control of conditions affecting protein extraction and matrix crystallization with the ability to deposit matrix accurately onto small surface features. For tissue sections, matrix spots of 180-200 microm in diameter were obtained and a procedure is described for generating coordinate files readable by a mass spectrometer to permit automated profile acquisition. Mass spectral quality and reproducibility was found to be better than that obtained with manual pipet spotting. The instrument can also deposit matrix spots in a dense array pattern so that, after analysis in a mass spectrometer, two-dimensional ion images may be constructed. Example ion images from a mouse brain are presented.

26 CFR 1.48-10 - Single purpose agricultural or horticultural structures.

Code of Federal Regulations, 2014 CFR

2014-04-01

... test if either of the requirements of paragraph (e)(1)(i) of this section is not met. Thus, for example... the structure to fail the exclusive use test when the change occurs. Thus, for example, a hog-raising... example). Finally, the structure fails the incidental use test of paragraph (e) of this section because...

26 CFR 1.48-10 - Single purpose agricultural or horticultural structures.

Code of Federal Regulations, 2013 CFR

2013-04-01

... test if either of the requirements of paragraph (e)(1)(i) of this section is not met. Thus, for example... the structure to fail the exclusive use test when the change occurs. Thus, for example, a hog-raising... example). Finally, the structure fails the incidental use test of paragraph (e) of this section because...

geomIO: A tool for geodynamicists to turn 2D cross-sections into 3D geometries

NASA Astrophysics Data System (ADS)

Baumann, Tobias; Bauville, Arthur

2016-04-01

In numerical deformation models, material properties are usually defined on elements (e.g., in body-fitted finite elements), or on a set of Lagrangian markers (Eulerian, ALE or mesh-free methods). In any case, geometrical constraints are needed to assign different material properties to the model domain. Whereas simple geometries such as spheres, layers or cuboids can easily be programmed, it quickly gets complex and time-consuming to create more complicated geometries for numerical model setups, especially in three dimensions. geomIO (geometry I/O, http://geomio.bitbucket.org/) is a MATLAB-based library that has two main functionalities. First, it can be used to create 3D volumes based on series of 2D vector drawings similar to a CAD program; and second, it uses these 3D volumes to assign material properties to the numerical model domain. The drawings can conveniently be created using the open-source vector graphics software Inkscape. Adobe Illustrator is also partially supported. The drawings represent a series of cross-sections in the 3D model domain, for example, cross-sectional interpretations of seismic tomography. geomIO is then used to read the drawings and to create 3D volumes by interpolating between the cross-sections. In the second part, the volumes are used to assign material phases to markers inside the volumes. Multiple volumes can be created at the same time and, depending on the order of assignment, unions or intersections can be built to assign additional material phases. geomIO also offers the possibility to create 3D temperature structures for geodynamic models based on depth dependent parameterisations, for example the half space cooling model. In particular, this can be applied to geometries of subducting slabs of arbitrary shape. Yet, geomIO is held very general, and can be used for a variety of applications. We present examples of setup generation from pictures of micro-scale tectonics and lithospheric scale setups of 3D present-day model geometries.

Composite beam analysis linear analysis of naturally curved and twisted anisotropic beams

NASA Astrophysics Data System (ADS)

Borri, Marco; Ghiringhelli, Gian L.; Merlini, Teodoro

1992-05-01

The aim of this report is to present a consistent theory for the deformation of a naturally curved and twisted anisotropic beam. The proposed formulation naturally extends the classical Saint-Venant approach to the case of curved and twisted anisotropic beams. The mathematical model developed under the assumption of span-wise uniform cross-section, curvature and twist, can take into account any kind of elastic coupling due to the material properties and the curved geometry. The consistency of the presented math-model and its generality about the cross-sectional shape, make it a useful tool even in a preliminary design optimization context such as the aeroelastic tailoring of helicopter rotor blades. The advantage of the present procedure is that it only requires a two-dimensional discretization; thus, very detailed analyses can be performed and interlaminar stresses between laminae can be evaluated. Such analyses would be extremely time consuming if performed with standard finite element codes: that prevents their recursive use as for example when optimizing a beam design. Moreover, as a byproduct of the proposed formulation, one obtains the constitutive law of the cross-section in terms of stress resultant and moment and their conjugate strain measures. This constitutive law takes into account any kind of elastic couplings, e.g., torsion-tension, tension-shear, bending-shear, and constitutes a fundamental input in aeroelastic analyses of helicopter blades. Four simple examples are given in order to show the principal features of the method.

[Quality system in cardiology: practical example to develop an organizational model for management certification without bureaucracy].

PubMed

Colonna, Paolo; Pasini, Evasio; Pitocchi, Oreste; Bovenzi, Francesco; Sorino, Margherita; de Luca, Italo

2003-04-01

It is a difficult task to define practical guidelines and a pragmatic achievement for the new document of the Italian Ministry of Health for structures of the national health system obtaining a quality system according to the ISO 9000 standard. The present article illustrates the different steps to accomplish the quality management in our cardiology department, recently internationally certified, and it gives several practical examples of the path followed in the different sections of the department to obtain the best management of all the Operative Units, identifying customer requests and measuring customer satisfaction.

78 FR 4305 - Common Crop Insurance Regulations; Florida Citrus Fruit Crop Insurance Provisions; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... and need to be clarified. First, the example in section 10(b)(6) that was proposed to be revised was mistakenly omitted in the revised text. This amendment adds the revised example back into section 10(b)(6... Sec. 457.107 as follows: 0 a. By revising section 10(b)(6); 0 b. By revising the added section 10(d)(6...

26 CFR 1.904-4 - Separate application of section 904 with respect to certain categories of income.

Code of Federal Regulations, 2010 CFR

2010-04-01

... principles, is relevant. See paragraph (c)(8) Examples 10 through 13 of this section for examples... domestic corporate shareholder meeting the stock ownership requirements of section 902(a) that (after... corporation of which the taxpayer is a domestic corporate shareholder meeting the stock ownership requirements...

26 CFR 1.962-3 - Treatment of actual distributions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... classified under § 1.959-3 and this section for purposes of section 962(d) as follows: Classification of... purposes of a section 959(c) amount and year classification under paragraph (b) of § 1.959-3, a... Revenue Code. The application of this subparagraph may be illustrated by the following example: Example...

26 CFR 1.962-3 - Treatment of actual distributions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... classified under § 1.959-3 and this section for purposes of section 962(d) as follows: Classification of... purposes of a section 959(c) amount and year classification under paragraph (b) of § 1.959-3, a... Revenue Code. The application of this subparagraph may be illustrated by the following example: Example...

A Finite Element Procedure for Calculating Fluid-Structure Interaction Using MSC/NASTRAN

NASA Technical Reports Server (NTRS)

Chargin, Mladen; Gartmeier, Otto

1990-01-01

This report is intended to serve two purposes. The first is to present a survey of the theoretical background of the dynamic interaction between a non-viscid, compressible fluid and an elastic structure is presented. Section one presents a short survey of the application of the finite element method (FEM) to the area of fluid-structure-interaction (FSI). Section two describes the mathematical foundation of the structure and fluid with special emphasis on the fluid. The main steps in establishing the finite element (FE) equations for the fluid structure coupling are discussed in section three. The second purpose is to demonstrate the application of MSC/NASTRAN to the solution of FSI problems. Some specific topics, such as fluid structure analogy, acoustic absorption, and acoustic contribution analysis are described in section four. Section five deals with the organization of the acoustic procedure flowchart. Section six includes the most important information that a user needs for applying the acoustic procedure to practical FSI problems. Beginning with some rules concerning the FE modeling of the coupled system, the NASTRAN USER DECKs for the different steps are described. The goal of section seven is to demonstrate the use of the acoustic procedure with some examples. This demonstration includes an analytic verification of selected FE results. The analytical description considers only some aspects of FSI and is not intended to be mathematically complete. Finally, section 8 presents an application of the acoustic procedure to vehicle interior acoustic analysis with selected results.

Artificial Intelligence in Education--State of the Art and Perspectives. ZIFF Papiere 111.

ERIC Educational Resources Information Center

Buiu, Catalin

This review contains an overview of past and present trends in the application of what is called "artificial intelligence" in traditional face-to-face education and in distance education. The reviewed trends are illustrated with examples of research projects and results throughout the world. The first section of the review discusses intelligence…

Ted's Writing across the Curriculum E-BOOK.

ERIC Educational Resources Information Center

Panitz, Theodore

The purpose of this paper is to provide a wide range of examples of writing across the curriculum (WAC) activities in order to encourage teachers to use writing in their classes regularly as a way of stimulating critical thinking in their students and providing variety in their teaching methods. The paper is presented in three sections. The first…

Computers in the Undergraduate Curriculum: An Aspect of the Many Section Problem.

ERIC Educational Resources Information Center

Churchill, Geoffrey

A brief case study of the resistance to technological change is presented using DOG, a small scale deterministic business game, as the example of technology. DOG, a decision mathematics game for the purpose of providing an environment for application of mathematical concepts, consists of assignments mostly utilizing matrix algebra but also some…

A teaching phantom for sonographers.

PubMed

Zagzebski, J A; Madsen, E L; Frank, G R

1991-01-01

An anthropomorphic torso section phantom is described that is intended for use during initial stages of ultrasonographer training. The phantom represents a section of the upper abdomen, with simulated ribs, liver, kidney with fat pad, gallbladder, aorta, and bowel gas. Positioned in the liver are ten simulated soft tissue masses, which produce a variety of typical echographic patterns. All simulated soft tissue components are formed of tissue-mimicking materials that match their corresponding tissue counterparts in terms of speed of sound, ultrasonic attenuation, and density. Construction details are presented and examples of images are shown.

Elemental mapping of biological samples using a scanning proton microprobe

NASA Astrophysics Data System (ADS)

Watt, F.; Grime, G. W.

1988-03-01

Elemental mapping using a scanning proton microprobe (SPM) can be a powerful technique for probing trace elements in biology, allowing complex interfaces to be studied in detail, identifying contamination and artefacts present in the specimen, and in certain circumstances obtaining indirect chemical information. Examples used to illustrate the advantages of the technique include the elemental mapping of growing pollen tubes, honey bee brain section, a mouse macrophage cell, human liver section exhibiting primary biliary cirrhosis, and the attack by a mildew fungus on a pea leaf.

12 CFR 41.2 - Examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Examples. 41.2 Section 41.2 Banks and Banking... Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph illustrate only the issue described in the...

12 CFR 222.2 - Examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Examples. 222.2 Section 222.2 Banks and Banking... (REGULATION V) General Provisions § 222.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a...

12 CFR 334.2 - Examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Examples. 334.2 Section 334.2 Banks and Banking... General Provisions § 334.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph...

12 CFR 571.2 - Examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Examples. 571.2 Section 571.2 Banks and Banking... Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph illustrate only the issue described in the...

12 CFR 717.2 - Examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Examples. 717.2 Section 717.2 Banks and Banking... Provisions § 717.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes compliance with this part. Examples in a paragraph illustrate only the...

26 CFR 25.7520-3T - Limitation on the application of section 7520 (temporary).

Code of Federal Regulations, 2011 CFR

2011-04-01

... section are illustrated by the following example: Example. Terminal illness. The donor transfers property... age 75 but has been diagnosed with an incurable illness and has at least a 50 percent probability of...

26 CFR 25.7520-3T - Limitation on the application of section 7520 (temporary).

Code of Federal Regulations, 2010 CFR

2010-04-01

... section are illustrated by the following example: Example. Terminal illness. The donor transfers property... age 75 but has been diagnosed with an incurable illness and has at least a 50 percent probability of...

26 CFR 1.215-1 - Periodic alimony, etc., payments.

Code of Federal Regulations, 2012 CFR

2012-04-01

... not allowed under section 215: Example 1. Pursuant to the terms of a decree of divorce, H, in 1956..., under section 215 are not deductible from his income. Example 2. A decree of divorce obtained by W from...

Particle trajectory computer program for icing analysis of axisymmetric bodies

NASA Technical Reports Server (NTRS)

Frost, Walter; Chang, Ho-Pen; Kimble, Kenneth R.

1982-01-01

General aviation aircraft and helicopters exposed to an icing environment can accumulate ice resulting in a sharp increase in drag and reduction of maximum lift causing hazardous flight conditions. NASA Lewis Research Center (LeRC) is conducting a program to examine, with the aid of high-speed computer facilities, how the trajectories of particles contribute to the ice accumulation on airfoils and engine inlets. This study, as part of the NASA/LeRC research program, develops a computer program for the calculation of icing particle trajectories and impingement limits relative to axisymmetric bodies in the leeward-windward symmetry plane. The methodology employed in the current particle trajectory calculation is to integrate the governing equations of particle motion in a flow field computed by the Douglas axisymmetric potential flow program. The three-degrees-of-freedom (horizontal, vertical, and pitch) motion of the particle is considered. The particle is assumed to be acted upon by aerodynamic lift and drag forces, gravitational forces, and for nonspherical particles, aerodynamic moments. The particle momentum equation is integrated to determine the particle trajectory. Derivation of the governing equations and the method of their solution are described in Section 2.0. General features, as well as input/output instructions for the particle trajectory computer program, are described in Section 3.0. The details of the computer program are described in Section 4.0. Examples of the calculation of particle trajectories demonstrating application of the trajectory program to given axisymmetric inlet test cases are presented in Section 5.0. For the examples presented, the particles are treated as spherical water droplets. In Section 6.0, limitations of the program relative to excessive computer time and recommendations in this regard are discussed.

26 CFR 1.355-3 - Active conduct of a trade or business.

Code of Federal Regulations, 2010 CFR

2010-04-01

... requirements of section 355(b). See paragraph (b)(3)(i) of this section. Example 5. For the past six years... (b)(3)(i) of this section. Example 7. For the past nine years, corporation X has owned and operated a.... For the past six years, corporation X has owned and operated hardware stores in several states. Two...

ZIP2DL: An Elastic-Plastic, Large-Rotation Finite-Element Stress Analysis and Crack-Growth Simulation Program

NASA Technical Reports Server (NTRS)

Deng, Xiaomin; Newman, James C., Jr.

1997-01-01

ZIP2DL is a two-dimensional, elastic-plastic finte element program for stress analysis and crack growth simulations, developed for the NASA Langley Research Center. It has many of the salient features of the ZIP2D program. For example, ZIP2DL contains five material models (linearly elastic, elastic-perfectly plastic, power-law hardening, linear hardening, and multi-linear hardening models), and it can simulate mixed-mode crack growth for prescribed crack growth paths under plane stress, plane strain and mixed state of stress conditions. Further, as an extension of ZIP2D, it also includes a number of new capabilities. The large-deformation kinematics in ZIP2DL will allow it to handle elastic problems with large strains and large rotations, and elastic-plastic problems with small strains and large rotations. Loading conditions in terms of surface traction, concentrated load, and nodal displacement can be applied with a default linear time dependence or they can be programmed according to a user-defined time dependence through a user subroutine. The restart capability of ZIP2DL will make it possible to stop the execution of the program at any time, analyze the results and/or modify execution options and resume and continue the execution of the program. This report includes three sectons: a theoretical manual section, a user manual section, and an example manual secton. In the theoretical secton, the mathematics behind the various aspects of the program are concisely outlined. In the user manual section, a line-by-line explanation of the input data is given. In the example manual secton, three types of examples are presented to demonstrate the accuracy and illustrate the use of this program.

"Lazy men", time-use, and rural development in Zambia.

PubMed

Whitehead, A

1999-11-01

This paper examines how work and the labor in agriculture in rural sub-Saharan Africa is measured. Section 1 presents a historical example of colonial discourses of the "lazy" African (the Lamba in Zambia). Section 2 analyzes a study carried out in rural Zambia to illustrate the relationship between stereotypes held by many Europeans, particular aspects of the colonial project, and the social relations brought about by colonialism. Section 3 examines the ways in which present work and labor approaches in sub-Saharan Africa embody value judgements which leads to distorted documentation of the division of labor between opposite genders. Sections 4 through 7 look at a time-use study conducted in Zambia and argue that studies of such nature create value judgement on what comprises work, and about how researchers and planners classify this. Overall, this article has demonstrated that time-use surveys may provide inadequate understanding of women and men's work in the absence of an understanding of the local context in which the work is undertaken, and of labor markets.

16 CFR 680.2 - Examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

16 CFR 680.2 - Examples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

16 CFR 680.2 - Examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

16 CFR 680.2 - Examples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

16 CFR 680.2 - Examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Examples. 680.2 Section 680.2 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT AFFILIATE MARKETING § 680.2 Examples. The examples in this part are not exclusive. Compliance with an example, to the extent applicable, constitutes...

Method for calculating lift distributions for unswept wings with flaps or ailerons by use of nonlinear section lift data

NASA Technical Reports Server (NTRS)

Sivells, James C; Westrick, Gertrude C

1952-01-01

A method is presented which allows the use of nonlinear section lift data in the calculation of the spanwise lift distribution of unswept wings with flaps or ailerons. This method is based upon lifting line theory and is an extension to the method described in NACA rep. 865. The mathematical treatment of the discontinuity in absolute angle of attack at the end of the flap or aileron involves the use of a correction factor which accounts for the inability of a limited trigonometric series to represent adequately the spanwise lift distribution. A treatment of the apparent discontinuity in maximum section lift coefficient is also described. Simplified computing forms containing detailed examples are given for both symmetrical and asymmetrical lift distributions. A few comparisons of calculated characteristics with those obtained experimentally are also presented.

Study of Historical Geometric Problems by Means of CAS and DGS

ERIC Educational Resources Information Center

Hašek, Roman; Zahradník, Jan

2015-01-01

The use of the dynamic mathematics software GeoGebra to solve geometric problems on conics and loci from an 18th century textbook will be presented. In particular, examples will be shown of how the use of this program helped the authors to understand the method that our predecessors used to deal with conic sections together with solving loci…

ASSESSMENT OF WETLAND CONDITION: AN EXAMPLE FROM THE UPPER JUNIATA WATERSHED IN PENNSYLVANIA, USA

EPA Science Inventory

The requirement of Section 305(b) of the Clean Water Act (CWA) that all waters of the U.S. be assessed every two years has been historically ignored for wetlands, even though they are included in the definition of “waters of the U.S.” This paper presents the use of a landscape an...

Face-to-Face, Hybrid, or Online?: Issues Faculty Face Redesigning an Introductory Engineering Graphics Course

ERIC Educational Resources Information Center

Branoff, Theodore; Wiebe, Eric

2009-01-01

A hybrid introductory course was developed and piloted during the Fall 2007 semester in three laptop sections (i.e., all of the students owned and brought laptops to class each day). The online portion of the course included voiced-over content presentations, software demonstrations, and sketching examples as well as online assessments. Sections…

Appreciating Differences: Teaching and Learning in a Culturally Diverse Classroom. Hot Topics: Usable Research. Revised Edition.

ERIC Educational Resources Information Center

Ploumis-Devick, Evelyn; Follman, Joseph

This publication presents information on and examples of how teachers and students can better communicate and learn in today's culturally diverse classrooms. The document begins with a quiz designed to help one examine one's beliefs about culture and foundations for those beliefs. The remainder of the document is divided into four sections.…

The method of complex characteristics for design of transonic blade sections

NASA Technical Reports Server (NTRS)

Bledsoe, M. R.

1986-01-01

A variety of computational methods were developed to obtain shockless or near shockless flow past two-dimensional airfoils. The approach used was the method of complex characteristics, which determines smooth solutions to the transonic flow equations based on an input speed distribution. General results from fluid mechanics are presented. An account of the method of complex characteristics is given including a description of the particular spaces and coordinates, conformal transformations, and numerical procedures that are used. The operation of the computer program COMPRES is presented along with examples of blade sections designed with the code. A user manual is included with a glossary to provide additional information which may be helpful. The computer program in Fortran, including numerous comment cards is listed.

Nature's Autonomous Oscillators

NASA Technical Reports Server (NTRS)

Mayr, H. G.; Yee, J.-H.; Mayr, M.; Schnetzler, R.

2012-01-01

Nonlinearity is required to produce autonomous oscillations without external time dependent source, and an example is the pendulum clock. The escapement mechanism of the clock imparts an impulse for each swing direction, which keeps the pendulum oscillating at the resonance frequency. Among nature's observed autonomous oscillators, examples are the quasi-biennial oscillation and bimonthly oscillation of the Earth atmosphere, and the 22-year solar oscillation. The oscillations have been simulated in numerical models without external time dependent source, and in Section 2 we summarize the results. Specifically, we shall discuss the nonlinearities that are involved in generating the oscillations, and the processes that produce the periodicities. In biology, insects have flight muscles, which function autonomously with wing frequencies that far exceed the animals' neural capacity; Stretch-activation of muscle contraction is the mechanism that produces the high frequency oscillation of insect flight, discussed in Section 3. The same mechanism is also invoked to explain the functioning of the cardiac muscle. In Section 4, we present a tutorial review of the cardio-vascular system, heart anatomy, and muscle cell physiology, leading up to Starling's Law of the Heart, which supports our notion that the human heart is also a nonlinear oscillator. In Section 5, we offer a broad perspective of the tenuous links between the fluid dynamical oscillators and the human heart physiology.

A new beam theory using first-order warping functions

NASA Technical Reports Server (NTRS)

Ie, C. A.; Kosmatka, J. B.

1990-01-01

Due to a certain type of loading and geometrical boundary conditions, each beam will respond differently depending on its geometrical form of the cross section and its material definition. As an example, consider an isotropic rectangular beam under pure bending. Plane sections perpendicular to the longitudinal axis of the beam will remain plane and perpendicular to the deformed axis after deformation. However, due to the Poisson effect, particles in the planes will move relative to each other resulting in a form of anticlastic deformation. In other words, even in pure bending of an isotropic beam, each cross section will deform in the plane. If the material of the beam above is replaced by a generally anisotropic material, then the cross sections will not only deform in the plane, but also out of plane. Hence, in general, both in-plane deformation and out-of-plane warping will exist and depend on the geometrical form and material definition of the cross sections and also on the loadings. For the purpose of explanation, an analogy is made. The geometrical forms of the bodies of each individual are unique. Hence, different sizes of clothes are needed. Finding the sizes of clothes for individuals is like determining the warping functions in beams. A new beam theory using first-order warping functions is introduced. Numerical examples will be presented for an isotropic beam with rectangular cross section. The theory can be extended for composite beams.

17 CFR 248.102 - Examples.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Examples. 248.102 Section 248... AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this subpart are not exclusive. The examples in this subpart provide guidance concerning the rules' application...

29 CFR 4022.104 - Examples.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Examples. 4022.104 Section 4022.104 Labor Regulations... Future Periods After Death § 4022.104 Examples. The following examples show how the rules in §§ 4022.101.... (1) Example 1: where surviving beneficiary predeceases participant. Ellen died before Charlie. As...

29 CFR 4022.95 - Examples.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Examples. 4022.95 Section 4022.95 Labor Regulations... IN TERMINATED SINGLE-EMPLOYER PLANS Certain Payments Owed Upon Death § 4022.95 Examples. The following examples show how the rules in §§ 4022.91 through 4022.94 apply. For examples on how these rules...

42 CFR 408.26 - Examples.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Examples. 408.26 Section 408.26 Public Health... PREMIUMS FOR SUPPLEMENTARY MEDICAL INSURANCE Amount of Monthly Premiums § 408.26 Examples. Example 1. Mr. J... 10 percent greater than if he had enrolled in his initial enrollment period. Example 2. Mr. V, who...

48 CFR 225.504 - Evaluation examples.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Evaluation examples. 225.504 Section 225.504 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... 225.504 Evaluation examples. For examples that illustrate the evaluation procedures in 225.502(c)(ii...

26 CFR 1.851-5 - Examples.

Code of Federal Regulations, 2014 CFR

2014-04-01

... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

26 CFR 1.851-5 - Examples.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

26 CFR 1.851-5 - Examples.

Code of Federal Regulations, 2013 CFR

2013-04-01

... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

26 CFR 1.851-5 - Examples.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TAXES (CONTINUED) Regulated Investment Companies and Real Estate Investment Trusts § 1.851-5 Examples. The provisions of section 851 may be illustrated by the following examples: Example 1. Investment...: Percent Cash 5 Government securities 10 Securities of regulated investment companies 20 Securities of...

A three-dimensional multiphase flow model for assessing NAPL contamination in porous and fractured media, 2. Porous medium simulation examples

NASA Astrophysics Data System (ADS)

Panday, S.; Wu, Y. S.; Huyakorn, P. S.; Springer, E. P.

1994-06-01

This paper discusses the verification and application of the three-dimensional (3-D) multiphase flow model presented by Huyakorn et al. (Part 1 in this issue) for assessing contamination due to subsurface releases of non-aqueous-phase liquids (NAPL's). Attention is focussed on situations involving one-, two- and three-dimensional flow through porous media. The model formulations and numerical schemes are tested for highly nonlinear field conditions. The utility and accuracy of various simplifications to certain simulation scenarios are assessed. Five simulation examples are included for demonstrative purposes. The first example verifies the model for vertical flow and compares the performance of the fully three-phase and the passive-air-phase formulations. Air-phase boundary conditions are noted to have considerable effects on simulation results. The second example verifies the model for cross-sectional analyses involving LNAPL and DNAPL migration. Finite-difference (5-point) and finite-element (9-point) spatial approximations are compared for different grid aspect ratios. Unless corrected, negative-transmissivity conditions were found to have undesirable impact on the finite-element solutions. The third example provides a model validation against laboratory experimental data on 5-spot water-flood treatment of oil reservoirs. The sensitivity to grid orientation is noted for the finite-difference schemes. The fourth example demonstrates model utility in characterizing the 3-D migration of LNAPL and DNAPL from surface sources. The final example present a modeling study of air sparging. Critical parameters affecting the performance of air-sparging system are examined. In general, the modeling results indicate sparging is more effective in water-retentive soils, and larger values of sparge influence radius may be achieved for certain anisotropic conditions.

Cognitive Processing Hardware Elements

DTIC Science & Technology

2005-01-31

characters. Results will be presented below. 1 4. Recognition of human faces. There are many other possible applications such as facial recognition and...For the experiments in facial recognition , we have used a 3-layer autoassociative neural network having the following specifications: "* The input...using the facial recognition system described in the section above as an example. This system uses an autoassociative neural network containing over 10

Space Mathematics: A Resource for Secondary School Teachers

NASA Technical Reports Server (NTRS)

Kastner, Bernice

1985-01-01

A collection of mathematical problems related to NASA space science projects is presented. In developing the examples and problems, attention was given to preserving the authenticity and significance of the original setting while keeping the level of mathematics within the secondary school curriculum. Computation and measurement, algebra, geometry, probability and statistics, exponential and logarithmic functions, trigonometry, matrix algebra, conic sections, and calculus are among the areas addressed.

19 CFR 10.305 - Value content requirement.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., marketing, accounting and legal services, and insurance; (ii) Brokerage charges relating to the importation... examples will illustrate these principles. Notwithstanding these examples, the totality of the facts must... paragraph (b)(1)(ii) of this section. The following examples will illustrate these principles. Example 1. If...

"Estuaries and coasts" CLIL* lesson plans in English and geology fieldtrip to Cornwall for students in European section

NASA Astrophysics Data System (ADS)

Bontempelli, Nathalie; Voyer, Karine; Lebourgeois, Patrick

2013-04-01

When the European section was created in our high school we had to choose an overarching theme. After considering that we live both in the River Seine estuary and near the English Channel it became obvious that our theme should be "estuaries and coasts". We began the 2012-2013 school year with a day-trip around the River Seine estuary to introduce the theme. First we made a general landscape study from a viewpoint, then we discussed the history of the navigation on the Seine, of local farming on marshland and finally we focused on farmhouse architecture. To conclude we visited the natural reserve near the "Normandy Bridge". As an introduction our poster aims at presenting this part of Normandy. And then we would like to show some examples of our CLIL lesson plans about this chosen topic. The aim of a CLIL lesson is to create interactive speaking between students working in pairs or in groups. There are three different stages: - Warm-up activities - In-depth study: listening, reading, echoing, looking for information on the internet, making a slide show and doing an oral presentation, participating to a role play… - Assessment : using what has been learnt to answer questions Finally we wish to present our field trip to Cornwall. We have already done it twice before (in 2002 and 2004) and this year it is scheduled in May 2013 with our European section students. The aim of this trip is to study geology and botany in English in order to extend what we teach in our CLIL lessons about estuaries and coasts. It also helps promoting exchanges with British families and building intercultural knowledge and understanding. Our program includes for example, fossil hunting and studying the Jurassic cliffs in Charmouth, observing an old ocean crust in Coverack, visiting Saint-Mickael's mount, discovering a tin mine in Geevor, walking through the "Lost Gardens of Heligan" and thus discovering an example of this world-renowned restored English garden, and last but not least having an overview of the biodiversity in the Lizard peninsula. *(Content and Language Integrated Learning)

A new compilation of experimental nuclear data for total reaction cross sections

NASA Astrophysics Data System (ADS)

Lantz, Mattias; Sihver, L.

The nucleon-nucleus and nucleus-nucleus total reaction cross sections are of importance in many different fields, both for a better theoretical understanding as well as for a number of applications, including space radiation dosimetry. We have performed a comprehensive literature study in order to find all available experimental data on total reaction cross sections, σR , and interaction cross sections, σI , for neutrons, protons, and all stable and exotic heavy ions. Excluded from the data base are measurements where the cross sections have been derived through model-dependent calculations from other kinds of measurements. The objective of the study is to identify where more measurements are needed in view of different applications, and to make the data easily available for model developers and experimentalists. We will present some examples from the study, which is in the stage of quality control of all the gathered data.

Preliminary notes on distribution of uranium in the Florida pebble phosphate field and suggestions for studying and sampling

USGS Publications Warehouse

,

1948-01-01

The accompanying map and sections show examples of the present state of information about the occurrence of the "Leached" uranium-bearing bed in the Florida pebble phosphate district. The dashed lines on the map define, as closely as present data permit, the limit of the area in which this bed contains significant amounts of uranium. The figures next to localities on the map indicate first, the thickness of the bed in feet; and second the uranium content in thousandths of percent. For example, the figures 16-10 next to the TVA localities in Secs. 9 and 10, T. 32 S., R. 26 E. indicate 16 feet at 0.010 percent uranium. A "0" by a locality indicates either that the uranium content is less than 0.001 percent or less than the concentration in the underlying phosphate beds (matrix of the miners) or that the leached bed is not present.

Floods in mountain areas—an overview based on examples from Switzerland

NASA Astrophysics Data System (ADS)

Weingartner, R.; Barben, M.; Spreafico, M.

2003-11-01

Mountains cover roughly one quarter of the planet's surface. Known as the Earth's water towers they produce a surplus of water that is transported to neighbouring lowlands via the vast river systems. Water as a vital benefit for life also holds dangers as a destructive element in the form of floods. The present paper, aims to discuss the basic aspects of floods in mountain areas and to illustrate them with examples of case studies, mainly from Switzerland. The hydrological characteristics of mountainous areas are described; the particular processes of flood generation in mountain areas, which should be taken into account. The last section is devoted to methods for estimating floods in ungauged catchments.

26 CFR 20.2013-6 - Examples.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 14 2011-04-01 2010-04-01 true Examples. 20.2013-6 Section 20.2013-6 Internal...; ESTATES OF DECEDENTS DYING AFTER AUGUST 16, 1954 Credits Against Tax § 20.2013-6 Examples. The application of §§ 20.2013-1 to 20.2013-5 may be further illustrated by the following examples: Example (1). (a) A...

26 CFR 20.2013-6 - Examples.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Examples. 20.2013-6 Section 20.2013-6 Internal...; ESTATES OF DECEDENTS DYING AFTER AUGUST 16, 1954 Credits Against Tax § 20.2013-6 Examples. The application of §§ 20.2013-1 to 20.2013-5 may be further illustrated by the following examples: Example (1). (a) A...

77 FR 62121 - Guides for the Use of Environmental Marketing Claims

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-11

... example in the Source Reduction section (16 CFR 260.17, Example 1) and retains the guidance on Refillable... marketers can substantiate all reasonable interpretations of these claims.'' \\5\\ A new example illustrates... CFR 260.4(b). \\6\\ 16 CFR 260.4, Example 3. The Commission has moved many of the original examples to...

48 CFR 9.508 - Examples.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Examples. 9.508 Section 9... CONTRACTOR QUALIFICATIONS Organizational and Consultant Conflicts of Interest 9.508 Examples. The examples in... officer apply the general rules in 9.505 to individual contract situations. (a) Company A agrees to...

17 CFR 248.102 - Examples.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P, S-AM, AND S-ID Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples...

17 CFR 248.102 - Examples.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this...

17 CFR 248.102 - Examples.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this...

17 CFR 248.102 - Examples.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 3 2012-04-01 2012-04-01 false Examples. 248.102 Section 248.102 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) REGULATIONS S-P AND S-AM Regulation S-AM: Limitations on Affiliate Marketing § 248.102 Examples. The examples in this...

The unrealized potential of everyday technology as a context for learning

NASA Astrophysics Data System (ADS)

Benenson, Gary

2001-09-01

This four-part article argues that technology education should play a far more substantial role in the schools. In the first section the article broadly defines the term technology to include the artifacts of everyday life as well as environments and systems. Second is a description of the City Technology Curriculum Guides project, of which most of the thinking in this article is a product. The third section presents a comprehensive set of goals for elementary technology education, using classroom examples from City Technology. Many of these goals coincide with the goals of other school subjects, including math, science, English language arts and social studies. The concluding section suggests a broad role for technology education in providing a context for learning in these areas.

An illustrative overview of semi-quantitative MRI scoring of knee osteoarthritis: lessons learned from longitudinal observational studies.

PubMed

Roemer, F W; Hunter, D J; Crema, M D; Kwoh, C K; Ochoa-Albiztegui, E; Guermazi, A

2016-02-01

To introduce the most popular magnetic resonance imaging (MRI) osteoarthritis (OA) semi-quantitative (SQ) scoring systems to a broader audience with a focus on the most commonly applied scores, i.e., the MOAKS and WORMS system and illustrate similarities and differences. While the main structure and methodology of each scoring system are publicly available, the core of this overview will be an illustrative imaging atlas section including image examples from multiple OA studies applying MRI in regard to different features assessed, show specific examples of different grades and point out pitfalls and specifics of SQ assessment including artifacts, blinding to time point of acquisition and within-grade evaluation. Similarities and differences between different scoring systems are presented. Technical considerations are followed by a brief description of the most commonly utilized SQ scoring systems including their responsiveness and reliability. The second part is comprised of the atlas section presenting illustrative image examples. Evidence suggests that SQ assessment of OA by expert MRI readers is valid, reliable and responsive, which helps investigators to understand the natural history of this complex disease and to evaluate potential new drugs in OA clinical trials. Researchers have to be aware of the differences and specifics of the different systems to be able to engage in imaging assessment and interpretation of imaging-based data. SQ scoring has enabled us to explain associations of structural tissue damage with clinical manifestations of the disease and with morphological alterations thought to represent disease progression. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

An illustrative overview of semi-quantitative MRI scoring of knee osteoarthritis: Lessons learned from longitudinal observational studies

PubMed Central

Roemer, Frank W.; Hunter, David J.; Crema, Michel D.; Kwoh, C. Kent; Ochoa-Albiztegui, Elena; Guermazi, Ali

2015-01-01

Objective To introduce the most popular magnetic resonance imaging (MRI) osteoarthritis (OA) semi-quantitative (SQ) scoring systems to a broader audience with a focus on the most commonly applied scores, i.e. the MOAKS and WORMS system and illustrate similarities and differences. Design While the main structure and methodology of each scoring system are publicly available, the core of this overview will be an illustrative imaging atlas section including image examples from multiple osteoarthritis studies applying MRI in regard to different features assessed, show specific examples of different grades and point out pitfalls and specifics of SQ assessment including artifacts, blinding to time point of acquisition and within-grade evaluation. Results Similarities and differences between different scoring systems are presented. Technical considerations are followed by a brief description of the most commonly utilized SQ scoring systems including their responsiveness and reliability. The second part is comprised of the atlas section presenting illustrative image examples. Conclusions Evidence suggests that SQ assessment of OA by expert MRI readers is valid, reliable and responsive, which helps investigators to understand the natural history of this complex disease and to evaluate potential new drugs in OA clinical trials. Researchers have to be aware of the differences and specifics of the different systems to be able to engage in imaging assessment and interpretation of imaging-based data. SQ scoring has enabled us to explain associations of structural tissue damage with clinical manifestations of the disease and with morphological alterations thought to represent disease progression. PMID:26318656

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shawver, D.M.; Stansfield, S.

This overview presents current research at Sandia National Laboratories in the Virtual Reality and Intelligent Simulation Lab. Into an existing distributed VR environment which we have been developing, and which provides shared immersion for multiple users, we are adding virtual actor support. The virtual actor support we are adding to this environment is intended to provide semi-autonomous actors, with oversight and high-level guiding control by a director/user, and to allow the overall action to be driven by a scenario. We present an overview of the environment into which our virtual actors will be added in Section 3, and discuss themore » direction of the Virtual Actor research itself in Section 4. We will briefly review related work in Section 2. First however we need to place the research in the context of what motivates it. The motivation for our construction of this environment, and the line of research associated with it, is based on a long-term program of providing support, through simulation, for situational training, by which we mean a type of training in which students learn to handle multiple situations or scenarios. In these situations, the student may encounter events ranging from the routine occurance to the rare emergency. Indeed, the appeal of such training systems is that they could allow the student to experience and develop effective responses for situations they would otherwise have no opportunity to practice, until they happened to encounter an actual occurance. Examples of the type of students for this kind of training would be security forces or emergency response forces. An example of the type of training scenario we would like to support is given in Section 4.2.« less

Goals and Strategies for the Human Lunar Reference Architecture

NASA Technical Reports Server (NTRS)

Seaman, Calvin H.

2010-01-01

The presentation examines common goals for human lunar exploration and strategic guidance. Three major sections include illustrative example goals, introduction to the GPoD campaign, and GPoD overview. The first section includes slides about strategic view of partnerships, the moon as a stepping stone and a uniquely preserved record, human-robotic partnership, innovative engagement, strategic considerations, and evaluation of campaigns against common goals. The second section examines campaigns considered, the philosophy of GPoD, GPoD campaign phase definitions, and GPoD design decision points. The third section examines lunar exploration capabilities, extended stay-relocation exploration mode, notional campaign destinations for GPoD, early robotics phase, development of the GPoD early robotics phase, polar exploration/system validation phase, polar relocatability phase, non-polar relocatability phase, long duration phase, and return to evaluation of campaigns.

15 CFR 700.52 - Examples of assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Examples of assistance. 700.52 Section... DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Special Priorities Assistance § 700.52 Examples of assistance... an item needed to fill a rated order. (b) Other examples of special priorities assistance include: (1...

26 CFR 1.1502-13 - Intercompany transactions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... clearly reflect the taxable income (and tax liability) of the group as a whole by preventing intercompany... otherwise applicable methods of accounting, the timing rules of this section control. For example, if S...—acceleration. Example 5. Successor group. Example 6. Liquidation—80% distributee. Example 7. Liquidation—no 80...

26 CFR 1.1250-3 - Exceptions and limitations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... following examples: Example 1. (i) Green transfers section 1250 property on March 1, 1968, to a corporation... subparagraph may be illustrated by the following example: Example: (a) Green owns property consisting of land and a fully equipped factory building thereon. The property is condemned and proceeds of $100,000 are...

26 CFR 53.4958-4 - Excess benefit transaction.

Code of Federal Regulations, 2012 CFR

2012-04-01

... meaning of paragraph (a)(2)(ii)(B) of this section) are taken into account. For example, in determining... a significant business purpose or exempt purpose of its own. (iv) Examples. The following examples illustrate when economic benefits are provided indirectly under the rules of this paragraph (a)(2): Example 1...

26 CFR 53.4958-4 - Excess benefit transaction.

Code of Federal Regulations, 2013 CFR

2013-04-01

... meaning of paragraph (a)(2)(ii)(B) of this section) are taken into account. For example, in determining... a significant business purpose or exempt purpose of its own. (iv) Examples. The following examples illustrate when economic benefits are provided indirectly under the rules of this paragraph (a)(2): Example 1...

26 CFR 53.4958-4 - Excess benefit transaction.

Code of Federal Regulations, 2014 CFR

2014-04-01

... meaning of paragraph (a)(2)(ii)(B) of this section) are taken into account. For example, in determining... a significant business purpose or exempt purpose of its own. (iv) Examples. The following examples illustrate when economic benefits are provided indirectly under the rules of this paragraph (a)(2): Example 1...

26 CFR 53.4958-4 - Excess benefit transaction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... meaning of paragraph (a)(2)(ii)(B) of this section) are taken into account. For example, in determining... a significant business purpose or exempt purpose of its own. (iv) Examples. The following examples illustrate when economic benefits are provided indirectly under the rules of this paragraph (a)(2): Example 1...

26 CFR 53.4958-4 - Excess benefit transaction.

Code of Federal Regulations, 2011 CFR

2011-04-01

... meaning of paragraph (a)(2)(ii)(B) of this section) are taken into account. For example, in determining... a significant business purpose or exempt purpose of its own. (iv) Examples. The following examples illustrate when economic benefits are provided indirectly under the rules of this paragraph (a)(2): Example 1...

Dissipative Structures At Laser-Solid Interactions

NASA Astrophysics Data System (ADS)

Nanai, Laszlo

1989-05-01

The questions which are discussed in this lecture refer to one of sections of laser-solid interactions, namely: to formation of different dissipative structures on the surface of metals and semiconductors when they are irradiated by intensive laser light in chemically active media (f.e.air). Some particular examples of the development at different spatial and time instabilities, periodic and stochastic structures, auto-wave processes are present-ed using testing materials vanadium metal and semiconducting V205 single crystals and light sources: cw and pulsed CO2 and YAG lasers.

26 CFR 7.465-5 - Examples.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Examples. 7.465-5 Section 7.465-5 Internal... INCOME TAX REGULATIONS UNDER THE TAX REFORM ACT OF 1976 § 7.465-5 Examples. The provisions of § 7.465-1 and § 7.465-2 may be illustrated by the following examples: Example (1). J and K, as equal partners...

26 CFR 1.112-1 - Combat zone compensation of members of the Armed Forces.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... Example 2. The facts are the same as in Example 1 except that the incubation period of the disease is one...) Examples of combat zone compensation. The rules of this section are illustrated by the following examples: Example 1. On January 5, outside of a combat zone, an enlisted member received basic pay for active duty...

26 CFR 1.112-1 - Combat zone compensation of members of the Armed Forces.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... Example 2. The facts are the same as in Example 1 except that the incubation period of the disease is one...) Examples of combat zone compensation. The rules of this section are illustrated by the following examples: Example 1. On January 5, outside of a combat zone, an enlisted member received basic pay for active duty...

26 CFR 1.112-1 - Combat zone compensation of members of the Armed Forces.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Example 2. The facts are the same as in Example 1 except that the incubation period of the disease is one...) Examples of combat zone compensation. The rules of this section are illustrated by the following examples: Example 1. On January 5, outside of a combat zone, an enlisted member received basic pay for active duty...

26 CFR 1.112-1 - Combat zone compensation of members of the Armed Forces.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... Example 2. The facts are the same as in Example 1 except that the incubation period of the disease is one...) Examples of combat zone compensation. The rules of this section are illustrated by the following examples: Example 1. On January 5, outside of a combat zone, an enlisted member received basic pay for active duty...

26 CFR 1.112-1 - Combat zone compensation of members of the Armed Forces.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... Example 2. The facts are the same as in Example 1 except that the incubation period of the disease is one...) Examples of combat zone compensation. The rules of this section are illustrated by the following examples: Example 1. On January 5, outside of a combat zone, an enlisted member received basic pay for active duty...

Containerless measurements on liquids at high temperatures

NASA Technical Reports Server (NTRS)

Weber, Richard

1993-01-01

The application of containerless techniques for measurements of the thermophysical properties of high temperature liquids is reviewed. Recent results obtained in the materials research laboratories at Intersonics are also presented. Work to measure high temperature liquid properties is motivated by both the need for reliable property data for modeling of industrial processes involving molten materials and generation of data form basic modeling of materials behavior. The motivation for this work and examples of variations in thermophysical property values from the literature are presented. The variations may be attributed to changes in the specimen properties caused by chemical changes in the specimen and/or to measurement errors. The two methods used to achieve containerless conditions were aeroacoustic levitation and electromagnetic levitation. Their qualities are presented. The accompanying slides show the layout of levitation equipment and present examples of levitated metallic and ceramic specimens. Containerless techniques provide a high degree of control over specimen chemistry, nucleation and allow precise control of liquid composition to be achieved. Effects of minor additions can thus be measured in a systematic way. Operation in reduced gravity enables enhanced control of liquid motion which can allow measurement of liquid transport properties. Examples of nucleation control, the thermodynamics of oxide contamination removal, and control of the chromium content of liquid aluminum oxide by high temperature containerless processes are presented. The feasibility of measuring temperature, emissivity, liquidus temperature, enthalpy, surface tension, density, viscosity, and thermal diffusivity are discussed in the final section of the paper.

Probabilistic Swarm Guidance using Optimal Transport

DTIC Science & Technology

2014-10-10

controlled to collectively exhibit useful emergent behavior [2]–[5]. Similarly, swarms of hundreds to thousands of femtosatellites (100-gram-class...algorithm using inhomo- geneous Markov chains (PSG– IMC ), each agent chooses the tuning parameter (ξjk) based on the Hellinger distance (HD) between the...PGA and PSG– IMC in the next section. B. Simulation Results We now present the setup of this simulation example. The swarm containing m = 5000 agents is

Auditing Rational Adversaries to Provably Manage Risks

DTIC Science & Technology

2012-05-23

series of white papers on accountability-based privacy governance in which one recommendation is that organisations should have in place policies and...that this state of affairs raises is how to design effective audit and punishment schemes. This paper articulates a desirable property and presents an...In this section, we provide an overview of our model using a motivating scenario that will serve as a running example for this paper . Consider a

Current Practices in Constructing and Evaluating Assurance Cases With Applications to Aviation

NASA Technical Reports Server (NTRS)

Rinehart, David J.; Knight, John C.; Rowanhill, Jonathan

2015-01-01

This report introduces and provides an overview of assurance cases including theory, practice, and evaluation. This report includes a section that introduces the principles, terminology, and history of assurance cases. The core of the report presents twelve example uses of assurance cases from a range of domains, using a novel classification scheme. The report also reviews the state of the art in assurance case evaluation methods.

Rural Schools Prototype Analysis. Volume II: Methodology. An Example Process of Identifying Determinants, Selecting Options, & Developing Schematic Designs.

ERIC Educational Resources Information Center

Construction Systems Management, Inc., Anchorage, AK.

Volume II of a 3-volume report demonstrates the use of Design Determinants and Options (presented in Volume I) in the planning and design of small rural Alaskan secondary schools. Section I, a checklist for gathering site-specific information to be used as a data base for facility design, is organized in the same format as Volume I, which can be…

76 FR 56973 - Elections Regarding Start-Up Expenditures, Corporation Organizational Expenditures, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-15

.... 7805 * * *. 0 Par. 2. Section 1.709-1 is amended by revising the last sentences of paragraphs (b)(4) Example 2, Example 5, and Example 6 to read as follows: Sec. 1.709-1 Treatment of organization and syndication costs. * * * * * (b) * * * (4) * * * * * * * * Example 2. * * * Partnership X may amortize the...

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2014 CFR

2014-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2013 CFR

2013-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2012 CFR

2012-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2011 CFR

2011-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

26 CFR 1.1244(d)-2 - Increases in basis of section 1244 stock.

Code of Federal Regulations, 2010 CFR

2010-04-01

... issuance there is for any reason, including the operation of section 1376(a), an increase in the basis of.... Therefore, a loss on stock, the basis of which has been increased subsequent to its issuance, must be... be illustrated by the following example: Example: For $10,000 a corporation issues 100 shares of...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2010 CFR

2010-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2014 CFR

2014-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2011 CFR

2011-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

26 CFR 1.509(a)-4 - Supporting organizations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... specified in its articles (within the meaning of paragraph (d) of this section). The fact that the actual.... Assume the same facts as example 3, except that T is a section 501(c)(3) organization other than a... the same facts as example 3 except that instead of the annual general purpose grant made to T, each...

Review of Extraskeletal Activity on Tc-99m Methylene Diphosphonate Bone Scintigraphy and Value of Cross-Sectional and SPECT-CT Imaging Correlation.

PubMed

Bermo, Mohammed; Behnia, Sanaz; Fair, Joanna; Miyaoka, Robert S; Elojeimy, Saeed

2017-07-31

Recognizing the different mechanisms and imaging appearance of extraskeletal Tc-99m methylene diphosphonate uptake enhances the diagnostic value of bone scan interpretation. In this article, we present a pictorial review of the different mechanisms of extraskeletal Tc-99m methylene diphosphonate uptake on bone scintigraphy including neoplastic, inflammatory, ischemic, traumatic, excretory, and iatrogenic. We also illustrate through case examples the added value of correlation with cross-sectional and single photon emission computed tomography and computed tomography imaging in localizing and characterizing challenging cases of extraskeletal uptake. Copyright © 2017 Elsevier Inc. All rights reserved.

Physics through the 1990s: Gravitation, cosmology and cosmic-ray physics

NASA Technical Reports Server (NTRS)

1986-01-01

The volume contains recommendations for space-and ground-based programs in gravitational physics, cosmology, and cosmic-ray physics. The section on gravitation examines current and planned experimental tests of general relativity; the theory behind, and search for, gravitational waves, including sensitive laser-interferometric tests and other observations; and advances in gravitation theory (for example, incorporating quantum effects). The section on cosmology deals with the big-bang model, the standard model from elementary-particle theory, the inflationary model of the Universe. Computational needs are presented for both gravitation and cosmology. Finally, cosmic-ray physics theory (nucleosynthesis, acceleration models, high-energy physics) and experiment (ground and spaceborne detectors) are discussed.

Estimation of pseudo-2D shear-velocity section by inversion of high frequency surface waves

USGS Publications Warehouse

Luo, Y.; Liu, J.; Xia, J.; Xu, Y.; Liu, Q.

2006-01-01

A scheme to generate pseudo-2D shear-velocity sections with high horizontal resolution and low field cost by inversion of high frequency surface waves is presented. It contains six steps. The key step is the joint method of crossed correlation and phase shift scanning. This joint method chooses only two traces to generate image of dispersion curve. For Rayleigh-wave dispersion is most important for estimation of near-surface shear-wave velocity, it can effectively obtain reliable images of dispersion curves with a couple of traces. The result of a synthetic example shows the feasibility of this scheme. ?? 2005 Society of Exploration Geophysicists.

Analysis for stresses and buckling of heated composite stiffened panels and other structures, phase 3

NASA Technical Reports Server (NTRS)

Viswanathan, A. V.; Tamekuni, M.

1973-01-01

Analytical methods based on linear theory are presented for predicting the thermal stresses in and the buckling of heated structures with arbitrary uniform cross section. The structure is idealized as an assemblage of laminated plate-strip elements, curved and planar, and beam elements. Uniaxially stiffened plates and shells of arbitrary cross section are typical examples. For the buckling analysis the structure or selected elements may be subjected to mechanical loads, in additional to thermal loads, in any desired combination of inplane transverse load and axial compression load. The analysis is also applicable to stiffened structures under inplane loads varying through the cross section, as in stiffened shells under bending. The buckling analysis is general and covers all modes of instability. The analysis has been applied to a limited number of problems and the results are presented. These while showing the validity and the applicability of the method do not reflect its full capability.

Geologic Cross Section E-E' through the Appalachian Basin from the Findlay Arch, Wood County, Ohio, to the Valley and Ridge Province, Pendleton County, West Virginia

USGS Publications Warehouse

Ryder, Robert T.; Swezey, Christopher S.; Crangle, Robert D.; Trippi, Michael H.

2008-01-01

Geologic cross section E-E' is the first in a series of cross sections planned by the U.S. Geological Survey (USGS) to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section E-E' provides a regional view of the structural and stratigraphic framework of the basin from the Findlay arch in northwestern Ohio to the Valley and Ridge province in eastern West Virginia, a distance of approximately 380 miles (mi) (fig. 1, on sheet 1). Cross section E-E' updates earlier geologic cross sections through the central Appalachian basin by Renfro and Feray (1970), Bennison (1978), and Bally and Snelson (1980) and a stratigraphic cross section by Colton (1970). Although other published cross sections through parts of the basin show more structural detail (for example, Shumaker, 1985; Kulander and Dean, 1986) and stratigraphic detail (for example, Ryder, 1992; de Witt and others, 1993; Hettinger, 2001), these other cross sections are of more limited extent geographically and stratigraphically. Although specific petroleum systems in the Appalachian basin are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on information shown on the cross section. Cross section E-E' lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank), but it does provide a general framework (stratigraphic units and general rock types) for the coal-bearing section. Also, cross section E-E' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste (for example, Colton, 1961; Lloyd and Reid, 1990) or for the sequestration of carbon dioxide (for example, Smith and others, 2002; Lucier and others, 2006).

Double parton scattering in $$p\\bar p$$ interactions at $$\\sqrt{s} = 1.96$$ TeV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gogota, O.

2016-12-28

We present the observation of doubly producedmore » $$J / \\psi$$ mesons as an example of processes containing a substantial fraction of double parton scattering. Measurements of the production cross sections for singly and doubly-produced $$J/\\psi$$ mesons were done with the D0 detector at Fermilab in $$p\\bar{p}$$ collisions at $$\\sqrt{s}$$ = 1.96 TeV with an integrated luminosity of 8.1 fb$$^{-1}$$. For the first time, the double $$J / \\psi$$ production cross section is separated into two parts: contributions from both single and double parton scattering. Lastly, this separation allowed us to determine the effective cross section σ eff, a parameter related to the parton spatial density inside the hadron.« less

Space physics education via examples in the undergraduate physics curriculum

NASA Astrophysics Data System (ADS)

Martin, R.; Holland, D. L.

2011-12-01

The field of space physics is rich with examples of basic physics and analysis techniques, yet it is rarely seen in physics courses or textbooks. As space physicists in an undergraduate physics department we like to use research to inform teaching, and we find that students respond well to examples from magnetospheric science. While we integrate examples into general education courses as well, this talk will focus on physics major courses. Space physics examples are typically selected to illustrate a particular concept or method taught in the course. Four examples will be discussed, from an introductory electricity and magnetism course, a mechanics/nonlinear dynamics course, a computational physics course, and a plasma physics course. Space physics provides examples of many concepts from introductory E&M, including the application of Faraday's law to terrestrial magnetic storm effects and the use of the basic motion of charged particles as a springboard to discussion of the inner magnetosphere and the aurora. In the mechanics and nonlinear dynamics courses, the motion of charged particles in a magnetotail current sheet magnetic field is treated as a Newtonian dynamical system, illustrating the Poincaré surface-of-section technique, the partitioning of phase space, and the KAM theorem. Neural network time series analysis of AE data is used as an example in the computational physics course. Finally, among several examples, current sheet particle dynamics is utilized in the plasma physics course to illustrate the notion of adiabatic/guiding center motion and the breakdown of the adiabatic approximation. We will present short descriptions of our pedagogy and student assignments in this "backdoor" method of space physics education.

Optimal one-section and two-section circular sound-absorbing duct liners for plane-wave and monopole sources without flow

NASA Technical Reports Server (NTRS)

Lester, H. C.; Posey, J. W.

1976-01-01

A discrete frequency study is made of the influence of source characteristics on the optimal properties of acoustically lined uniform and two section ducts. Two simplified sources, a plane wave and a monopole, are considered in some detail and over a greater frequency range than has been previously studied. Source and termination impedance effects are given limited examination. An example of a turbomachinery source and three associated source variants is also presented. Optimal liner designs based on modal theory approach the Cremer criterion at low frequencies and the geometric acoustics limit at high frequencies. Over an intermediate frequency range, optimal two section liners produced higher transmission losses than did the uniform configurations. Source distribution effects were found to have a significant effect on optimal liner design, but source and termination impedance effects appear to be relatively unimportant.

The Schwinger Variational Method

NASA Technical Reports Server (NTRS)

Huo, Winifred M.

1995-01-01

Variational methods have proven invaluable in theoretical physics and chemistry, both for bound state problems and for the study of collision phenomena. The application of the Schwinger variational (SV) method to e-molecule collisions and molecular photoionization has been reviewed previously. The present chapter discusses the implementation of the SV method as applied to e-molecule collisions. Since this is not a review of cross section data, cross sections are presented only to server as illustrative examples. In the SV method, the correct boundary condition is automatically incorporated through the use of Green's function. Thus SV calculations can employ basis functions with arbitrary boundary conditions. The iterative Schwinger method has been used extensively to study molecular photoionization. For e-molecule collisions, it is used at the static exchange level to study elastic scattering and coupled with the distorted wave approximation to study electronically inelastic scattering.

Method of Matching Performance of Compressor Systems with that of Aircraft Power Sections

NASA Technical Reports Server (NTRS)

Bullock, Robert O.; Keetch, Robert C.; Moses, Jason J.

1945-01-01

A method is developed of easily determining the performance of a compressor system relative to that of the power section for a given altitude. Because compressors, reciprocating engines, and turbines are essentially flow devices, the performance of each of these power-plant components is presented in terms of similar dimensionless ratios. The pressure and temperature changes resulting from restrictions of the charge-air flow and from heat transfer in the ducts connecting the components of the power plant are also expressed by the same dimensionless ratios and the losses are included in the performance of the compressor. The performance of a mechanically driven, single-stage compressor in relation to the performance of a conventional air-cooled engine operating at sea-level conditions is presented as an example of the application of the method.

29 CFR 778.205 - Premiums for weekend and holiday work-example.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Premiums for weekend and holiday work-example. 778.205....205 Premiums for weekend and holiday work—example. The application of section 7(e)(6) may be illustrated by the following example: Suppose an agreement of employment calls for the payment of $7.50 an...

26 CFR 1.367(a)-7 - Outbound transfers of property described in section 361(a) or (b).

Code of Federal Regulations, 2014 CFR

2014-04-01

...)) by five or fewer, but at least one, control group members. For illustrations of this rule, see paragraph (g) of this section, Example 4 and Example 5. (2) Gain recognition—(i) Non-control group members... aggregate ownership interest percentage of all non-control group members, reduced (but not below zero) by...

26 CFR 1.367(a)-7 - Outbound transfers of property described in section 361(a) or (b).

Code of Federal Regulations, 2013 CFR

2013-04-01

...)) by five or fewer, but at least one, control group members. For illustrations of this rule, see paragraph (g) of this section, Example 4 and Example 5. (2) Gain recognition—(i) Non-control group members... aggregate ownership interest percentage of all non-control group members, reduced (but not below zero) by...

76 FR 60721 - Deduction for Qualified Film and Television Production Costs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

... regulations clarify that costs paid on behalf of an owner (for example, participations and residuals paid by a... preventing the use of section 181 in cases that do not advance the goal of the statute, such as the purchase... capitalization if section 263A applied to the owner of the production) for inclusion in a game (for example, as a...

Mechanical and chemical recycling of solid plastic waste.

PubMed

Ragaert, Kim; Delva, Laurens; Van Geem, Kevin

2017-11-01

This review presents a comprehensive description of the current pathways for recycling of polymers, via both mechanical and chemical recycling. The principles of these recycling pathways are framed against current-day industrial reality, by discussing predominant industrial technologies, design strategies and recycling examples of specific waste streams. Starting with an overview on types of solid plastic waste (SPW) and their origins, the manuscript continues with a discussion on the different valorisation options for SPW. The section on mechanical recycling contains an overview of current sorting technologies, specific challenges for mechanical recycling such as thermo-mechanical or lifetime degradation and the immiscibility of polymer blends. It also includes some industrial examples such as polyethylene terephthalate (PET) recycling, and SPW from post-consumer packaging, end-of-life vehicles or electr(on)ic devices. A separate section is dedicated to the relationship between design and recycling, emphasizing the role of concepts such as Design from Recycling. The section on chemical recycling collects a state-of-the-art on techniques such as chemolysis, pyrolysis, fluid catalytic cracking, hydrogen techniques and gasification. Additionally, this review discusses the main challenges (and some potential remedies) to these recycling strategies and ground them in the relevant polymer science, thus providing an academic angle as well as an applied one. Copyright © 2017 Elsevier Ltd. All rights reserved.

Space benefits: The secondary application of aerospace technology in other sectors of the economy

NASA Technical Reports Server (NTRS)

1976-01-01

A benefits briefing notebook is presented for the NASA Technology Utilization Office in which 515 applications of NASA aerospace technology to other sections of the economy are described. An overview of technology transfer is given. Benefit cases are cited in 19 categories along with pertinent information, such as communication link, DRI transfer example file, and individual case number. General, organization, geographic, and field center indexes are provided.

Concerning the electrosynthesis of hydrogen peroxide and peroxodisulfates. Section 2: Optimization of electrolysis cells using an electrolyzer for peroxodisulfuric acid as an example

NASA Technical Reports Server (NTRS)

Schleiff, M.; Thiele, W.; Matschiner, H.

1986-01-01

The model is presented of an electrolyzer for peroxodisulfuric acid, and it is analyzed mathematically. Its application for engineering and economic optimization is investigated in detail. The mathematical analysis leads to conclusions concerning the change in position of the optimum with respect to the various target functions due to changes of the individual design-caused and economic parameters.

SRA (Short Range Aids to Navigation) Resource Management: Measures of Effectiveness.

DTIC Science & Technology

1986-09-01

invest ’ ’-" in R&D and technological innovation. uit Measures of effectiveness developed under the first task deal primarily with safety...illustratve example presented in Chapter 5. A project of this nature and complexity could not be carried out without the assistance and support of others. A...helping the project attain its goals. Foremost is Mr. Karl R. Schroeder, Short Range Aids to Navigation Section Chief in the USCG

Ribbons of semithin sections: an advanced method with a new type of diamond knife.

PubMed

Blumer, Michael J F; Gahleitner, P; Narzt, T; Handl, C; Ruthensteiner, B

2002-10-15

Complete series of semithin sections are imperative for 3-D reconstruction, but with traditional microtomy techniques it is difficult and time-consuming to trace stained and labeled structures. In the present study we introduce a method for making and collecting ribbons of semithin sections with a new, commercial available diamond knife (histo-jumbo-diamond knife, Diatome AG, Biel, Switzerland). The special feature of the diamond knife is the large water bath (boat) into which a glass slide can be dipped. The method has distinct advantages and the handling is simple. The resin block is trimmed into a truncated pyramid. Contact glue is applied to the leading face of the pyramid, which makes sections stick together to form a ribbon. Following sectioning, the ribbons are mounted onto glass slides and aligned in parallel. Stretching out and drying the ribbons on a hot plate is the final step of the method. Major advantages of this method are the perfect alignment of sections with identical orientation of structures, the completeness of series, and the significant saving of time. This facilitates tracing of stained and labeled structures, yielding quick 3-D reconstruction. Semithin sections can be cut from 0.5 to 2 micro m and several ribbons can be mounted side by side onto the slide. Two examples are presented to illustrate the advantages of the method.

Visualizing Cross-sectional Data in a Real-World Context

NASA Astrophysics Data System (ADS)

Van Noten, K.; Lecocq, T.

2016-12-01

If you could fly around your research results in three dimensions, wouldn't you like to do it? Visualizing research results properly during scientific presentations already does half the job of informing the public on the geographic framework of your research. Many scientists use the Google Earth™ mapping service (V7.1.2.2041) because it's a great interactive mapping tool for assigning geographic coordinates to individual data points, localizing a research area, and draping maps of results over Earth's surface for 3D visualization. However, visualizations of research results in vertical cross-sections are often not shown simultaneously with the maps in Google Earth. A few tutorials and programs to display cross-sectional data in Google Earth do exist, and the workflow is rather simple. By importing a cross-sectional figure into in the open software SketchUp Make [Trimble Navigation Limited, 2016], any spatial model can be exported to a vertical figure in Google Earth. In this presentation a clear workflow/tutorial is presented how to image cross-sections manually in Google Earth. No software skills, nor any programming codes are required. It is very easy to use, offers great possibilities for teaching and allows fast figure manipulation in Google Earth. The full workflow can be found in "Van Noten, K. 2016. Visualizing Cross-Sectional Data in a Real-World Context. EOS, Transactions AGU, 97, 16-19".The video tutorial can be found here: https://www.youtube.com/watch?v=Tr8LwFJ4RYU&Figure: Cross-sectional Research Examples Illustrated in Google Earth

A classification scheme for risk assessment methods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stamp, Jason Edwin; Campbell, Philip LaRoche

2004-08-01

This report presents a classification scheme for risk assessment methods. This scheme, like all classification schemes, provides meaning by imposing a structure that identifies relationships. Our scheme is based on two orthogonal aspects--level of detail, and approach. The resulting structure is shown in Table 1 and is explained in the body of the report. Each cell in the Table represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that amore » method chosen is optimal for a situation given. This report imposes structure on the set of risk assessment methods in order to reveal their relationships and thus optimize their usage.We present a two-dimensional structure in the form of a matrix, using three abstraction levels for the rows and three approaches for the columns. For each of the nine cells in the matrix we identify the method type by name and example. The matrix helps the user understand: (1) what to expect from a given method, (2) how it relates to other methods, and (3) how best to use it. Each cell in the matrix represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that a method chosen is optimal for a situation given. The matrix, with type names in the cells, is introduced in Table 2 on page 13 below. Unless otherwise stated we use the word 'method' in this report to refer to a 'risk assessment method', though often times we use the full phrase. The use of the terms 'risk assessment' and 'risk management' are close enough that we do not attempt to distinguish them in this report. The remainder of this report is organized as follows. In Section 2 we provide context for this report--what a 'method' is and where it fits. In Section 3 we present background for our classification scheme--what other schemes we have found, the fundamental nature of methods and their necessary incompleteness. In Section 4 we present our classification scheme in the form of a matrix, then we present an analogy that should provide an understanding of the scheme, concluding with an explanation of the two dimensions and the nine types in our scheme. In Section 5 we present examples of each of our classification types. In Section 6 we present conclusions.« less

Utilizing Direct Numerical Simulations of Transition and Turbulence in Design Optimization

NASA Technical Reports Server (NTRS)

Rai, Man M.

2015-01-01

Design optimization methods that use the Reynolds-averaged Navier-Stokes equations with the associated turbulence and transition models, or other model-based forms of the governing equations, may result in aerodynamic designs with actual performance levels that are noticeably different from the expected values because of the complexity of modeling turbulence/transition accurately in certain flows. Flow phenomena such as wake-blade interaction and trailing edge vortex shedding in turbines and compressors (examples of such flows) may require a computational approach that is free of transition/turbulence models, such as direct numerical simulations (DNS), for the underlying physics to be computed accurately. Here we explore the possibility of utilizing DNS data in designing a turbine blade section. The ultimate objective is to substantially reduce differences between predicted performance metrics and those obtained in reality. The redesign of a typical low-pressure turbine blade section with the goal of reducing total pressure loss in the row is provided as an example. The basic ideas presented here are of course just as applicable elsewhere in aerodynamic shape optimization as long as the computational costs are not excessive.

["Operationalised psychodynamic diagnostics in childhood and adolescence" (OPD-CA) in practice].

PubMed

Schulte-Markwort, Michael; Resch, Franz; Bürgin, Dieter

2004-02-01

"Operationalised psychodynamic diagnostics in childhood and adolescence" (OPD-CA) has been completed in its first version after years of development. In a first interview with a 13-year-old boy, the diagnostic instruments of OPD-CA are presented by means of examples. The text passages of the transcribed first interview are evaluated in four sections by representatives of the respective working groups regarding the axes--relationships, conflict, structure and preconditions for treatment--and the diagnostic conclusions resulting from this are presented, thus providing a direct insight into the specific psychodynamic diagnostics of OPD-CA.

Analysis of temperature distribution in liquid-cooled turbine blades

NASA Technical Reports Server (NTRS)

Livingood, John N B; Brown, W Byron

1952-01-01

The temperature distribution in liquid-cooled turbine blades determines the amount of cooling required to reduce the blade temperature to permissible values at specified locations. This report presents analytical methods for computing temperature distributions in liquid-cooled turbine blades, or in simplified shapes used to approximate sections of the blade. The individual analyses are first presented in terms of their mathematical development. By means of numerical examples, comparisons are made between simplified and more complete solutions and the effects of several variables are examined. Nondimensional charts to simplify some temperature-distribution calculations are also given.

76 FR 71919 - Corporate Reorganizations; Allocation of Basis in “All Cash D” Reorganizations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-21

... follows: Authority: 26 U.S.C. 7805 * * * Section 1.358-2 also issued under 26 U.S.C. 358(b)(1). Par. 2. Section 1.358-2 is amended by: 1. Revising paragraph (a)(2)(iii). 2. Adding a new Example 15 and Example....358-2 Allocation of basis among nonrecognition property. (a) * * * (2) * * * (iii) [The text of this...

26 CFR 1.861-14T - Special rules for allocating and apportioning certain expenses (other than interest expense) of...

Code of Federal Regulations, 2010 CFR

2010-04-01

... moratorium. The rules of this section do not apply to research and experimental expenses allocated under... assume that section 482 has not been applied by the Commissioner. Example 1: (i) Facts. P owns all of the....020 Research expense apportioned to United States income: EC07OC91.021 Example 2: (i) Facts. P owns...

Observations of brine drainage networks and microstructure of first-year sea ice

NASA Astrophysics Data System (ADS)

Cole, D. M.; Shapiro, L. H.

1998-09-01

Brine drainage networks and the microstructure of first-year sea ice have been examined at two locations near Barrow, northern Alaska. A method for obtaining full-depth sections of ice sheets up to 1.8 m thick is presented and shown to provide information on the spatial distribution and geometry of brine drainage networks on a scale of meters. A number of such sections from the two test sites are presented which reveal a greater variety of main channel and side branch configurations than is typically observed in ice grown in the laboratory. Vertical and horizontal micrographs and thin section photographs were obtained in November 1993, and March and May 1994 at a test site in the relatively protected Elson Lagoon. The resulting time series of photographic records provide detailed information on the size, shape, and spatial distribution of the brine- and gas-filled inclusions and a means to quantify their size and shape changes with time. An example of the changes with time in inclusion sizes and aspect ratios in the vertical and horizontal directions for a depth of 0.2 m, with a given thermal history is also presented.

Static and dynamic structural-sensitivity derivative calculations in the finite-element-based Engineering Analysis Language (EAL) system

NASA Technical Reports Server (NTRS)

Camarda, C. J.; Adelman, H. M.

1984-01-01

The implementation of static and dynamic structural-sensitivity derivative calculations in a general purpose, finite-element computer program denoted the Engineering Analysis Language (EAL) System is described. Derivatives are calculated with respect to structural parameters, specifically, member sectional properties including thicknesses, cross-sectional areas, and moments of inertia. Derivatives are obtained for displacements, stresses, vibration frequencies and mode shapes, and buckling loads and mode shapes. Three methods for calculating derivatives are implemented (analytical, semianalytical, and finite differences), and comparisons of computer time and accuracy are made. Results are presented for four examples: a swept wing, a box beam, a stiffened cylinder with a cutout, and a space radiometer-antenna truss.

Biochemical Pathways: An Atlas of Biochemistry and Molecular Biology (edited by Gerhard Michal)

NASA Astrophysics Data System (ADS)

Voige, Reviewed By William H.

2000-02-01

For decades, a wall chart detailing living organisms' metabolic pathways has been a fixture in many classrooms and laboratories where biochemistry is taught. One of the most popular of those charts first appeared 30 years ago. Now its editor, Gerhard Michal, has produced a book that summarizes metabolism (broadly defined) in graphical and textual formats. The book retains the elegance of the chart. Names of molecules are printed in a crisp, easy-to-read font, and structural formulas are shown with exemplary clarity. Color coding serves multiple purposes: to differentiate enzymes, substrates, cofactors, and effector molecules; to indicate in which group or groups of organisms a reaction has been observed; and to distinguish enzymatic reactions from regulatory effects. The primary advantage of presenting this information in book format is immediately apparent. A typical metabolic chart covers about 2 m2; the book has a total surface area nearly 10 times greater. The extra space is used to add explanatory text to the figures and to include many topics not covered by the traditional definition of metabolism. Examples include replication, transcription, translation, reaction mechanisms for proteolytic enzymes, and the role of chaperones in protein folding. Illustrating these topics is not as straightforward as delineating a metabolic pathway, but the author has done an admirable job of designing figures that clarify these and other aspects of biochemistry and complement the accompanying text. A potential deficiency of book format is the inability to clearly show links between different realms of metabolism: carbohydrate and amino acid pathways, for example. The book overcomes this problem in two ways. A diagrammatic overview of metabolism (with references to applicable sections of the book) is printed inside its front cover, and key compounds (pyruvate, for example) have a distinctive green background to provide a visual link between pathways. (The author compares this feature to the hyperlinks in an electronic document.) The book's index is comprehensive and useful. Entries for "phenylketonuria" and "sickle cell anemia", for example, lead to commendably concise summaries of these hereditary diseases (and the relevant metabolic pathway, in the former case). Looking up a specific molecule, however, is less helpful. The listing for fumarate hydratase, a citric acid cycle enzyme, directs the reader to the chapter on special bacterial metabolism but not to the section on the citric acid cycle itself. Literature references are included at the end of each section and are mainly from the 1990s, but they could be more useful. A long section on heme proteins, for example, concludes with eight citations, but their titles are not included, so it is impossible to determine what topic each one addresses. This book will be most useful to those with a good understanding of the fundamentals of biochemistry. Some of the information it presents could easily confuse less experienced readers. For example, it classifies selenocysteine as a standard amino acid in a figure but not in the accompanying text. In the diagram of anaerobic glycolysis, a double-headed arrow for the hexokinase reaction reinforces the frustratingly common student misperception that the phosphoryl group of glucose-6-phosphate can be used to phosphorylate ADP. Biochemical Pathways compiles a large amount of information in a single source. Its good index and clear, concise text and diagrams should make it a reliable way of gaining insight into many biochemical topics. With a price similar to that of most textbooks, it merits a place in the libraries of individuals and academic departments that teach biochemistry.

15 CFR 710.4 - Overview of scheduled chemicals and examples of affected industries.

Code of Federal Regulations, 2014 CFR

2014-01-01

... examples of affected industries. 710.4 Section 710.4 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL... REGULATIONS (CWCR) § 710.4 Overview of scheduled chemicals and examples of affected industries. The following...

Unstructured mesh generation and adaptivity

NASA Technical Reports Server (NTRS)

Mavriplis, D. J.

1995-01-01

An overview of current unstructured mesh generation and adaptivity techniques is given. Basic building blocks taken from the field of computational geometry are first described. Various practical mesh generation techniques based on these algorithms are then constructed and illustrated with examples. Issues of adaptive meshing and stretched mesh generation for anisotropic problems are treated in subsequent sections. The presentation is organized in an education manner, for readers familiar with computational fluid dynamics, wishing to learn more about current unstructured mesh techniques.

Sports pairs: insights on athletic talent; research reviews: twins with leukemia; parents and twins.

PubMed

Segal, Nancy L

2007-06-01

Twin research exploring genetic and environmental influences on athletic interests and talents is reviewed. Illustrative examples of twin athletes representing a variety of sports activities are presented. This is followed by an overview of twin studies offering critical insights into the onset and progress of leukemia. In the last section, timely events involving twins and parents of twins will be described--each case provides a new look at an old question.

Guide to the identification of fish protozoan and metazoan parasites in stained tissue sections

USGS Publications Warehouse

Bruno, D.W.; Nowak, B.; Elliott, D.G.

2006-01-01

The identification of protozoan and metazoan parasites is traditionally carried out using a series of classical keys based upon the morphology of the whole organism. However, in stained tissue sections prepared for light microscopy, taxonomic features will be missing, thus making parasite identification difficult. This work highlights the characteristic features of representative parasites in tissue sections to aid identification. The parasite examples discussed are derived from species affecting finfish, and predominantly include parasites associated with disease or those commonly observed as incidental findings in disease diagnostic cases. Emphasis is on protozoan and small metazoan parasites (such as Myxosporidia) because these are the organisms most likely to be missed or mis-diagnosed during gross examination. Figures are presented in colour to assist biologists and veterinarians who are required to assess host/parasite interactions by light microscopy.

Simulation of unsteady flow and solute transport in a tidal river network

USGS Publications Warehouse

Zhan, X.

2003-01-01

A mathematical model and numerical method for water flow and solute transport in a tidal river network is presented. The tidal river network is defined as a system of open channels of rivers with junctions and cross sections. As an example, the Pearl River in China is represented by a network of 104 channels, 62 nodes, and a total of 330 cross sections with 11 boundary section for one of the applications. The simulations are performed with a supercomputer for seven scenarios of water flow and/or solute transport in the Pearl River, China, with different hydrological and weather conditions. Comparisons with available data are shown. The intention of this study is to summarize previous works and to provide a useful tool for water environmental management in a tidal river network, particularly for the Pearl River, China.

Photoionization of ground and excited levels of P II

NASA Astrophysics Data System (ADS)

Nahar, Sultana N.

2017-01-01

Photoionization cross section (σPI) of P II, (hν + P II → P III + e), from ground and a large number of excited levels are presented. The study includes the resonant structures and the characteristics of the background in photoionization cross sections. The present calculations were carried out in the Breit-Pauli R-matrix (BPRM) method that includes relativistic effects. The autoionizing resonances are delineated with a fine energy mesh to observe the fine structure effects. A singular resonance, formed by the coupling of channels in fine structure but not allowed in LS coupling, is seen at the ionization threshold of photoionization for the ground and many excited levels. The background cross section is seen enhanced compared to smooth decay for the excited levels. Examples are presented to illustrate the enhanced background cross sections at the energies of the core levels, 4P3/2 and 2D3/2, that are allowed for electric dipole transitions by the core ground level 2 P1/2o. In addition strong Seaton or photo-excitation-of-core (PEC) resonances are found in the photoionization of single valence electron excited levels. Calculations used a close coupling wave function expansion that included 18 fine structure levels of core P III from configurations 3s23p, 3s3p2, 3s23d, 3s24s, 3s24p and 3p3. Photoionization cross sections are presented for all 475 fine structure levels of P II found with n ≤ 10 and l ≤ 9. The present results will provide high precision parameters of various applications involving this less studied ion.

26 CFR 1.58-9 - Application of the tax benefit rule to the minimum tax for taxable years beginning prior to 1987.

Code of Federal Regulations, 2014 CFR

2014-04-01

... exceed the limitation under section 904. Example 1. In 1982 Corporation B has $17.6 million dollars in... Corporation B has $17.6 million dollars in foreign tax credits available for the taxable year. If preference... limitation under section 904. Example 1. (i) In 1982 Corporation B has $17.6 million dollars in foreign tax...

26 CFR 1.58-9 - Application of the tax benefit rule to the minimum tax for taxable years beginning prior to 1987.

Code of Federal Regulations, 2011 CFR

2011-04-01

... exceed the limitation under section 904. Example 1. In 1982 Corporation B has $17.6 million dollars in... Corporation B has $17.6 million dollars in foreign tax credits available for the taxable year. If preference... limitation under section 904. Example 1. (i) In 1982 Corporation B has $17.6 million dollars in foreign tax...

26 CFR 1.58-9 - Application of the tax benefit rule to the minimum tax for taxable years beginning prior to 1987.

Code of Federal Regulations, 2012 CFR

2012-04-01

... exceed the limitation under section 904. Example 1. In 1982 Corporation B has $17.6 million dollars in... Corporation B has $17.6 million dollars in foreign tax credits available for the taxable year. If preference... limitation under section 904. Example 1. (i) In 1982 Corporation B has $17.6 million dollars in foreign tax...

26 CFR 1.58-9 - Application of the tax benefit rule to the minimum tax for taxable years beginning prior to 1987.

Code of Federal Regulations, 2013 CFR

2013-04-01

... exceed the limitation under section 904. Example 1. In 1982 Corporation B has $17.6 million dollars in... Corporation B has $17.6 million dollars in foreign tax credits available for the taxable year. If preference... limitation under section 904. Example 1. (i) In 1982 Corporation B has $17.6 million dollars in foreign tax...

Passive cooling system for a vehicle

DOEpatents

Hendricks, Terry Joseph; Thoensen, Thomas

2005-11-15

A passive cooling system for a vehicle (114) transfers heat from an overheated internal component, for example, an instrument panel (100), to an external portion (116) of the vehicle (114), for example, a side body panel (126). The passive cooling system includes one or more heat pipes (112) having an evaporator section (118) embedded in the overheated internal component and a condenser section (120) at the external portion (116) of the vehicle (114). The evaporator (118) and condenser (120) sections are in fluid communication. The passive cooling system may also include a thermally conductive film (140) for thermally connecting the evaporator sections (118) of the heat pipes (112) to each other and to the instrument panel (100).

Passive Cooling System for a Vehicle

DOEpatents

Hendricks, T. J.; Thoensen, T.

2005-11-15

A passive cooling system for a vehicle (114) transfers heat from an overheated internal component, for example, an instrument panel (100), to an external portion (116) of the vehicle (114), for example, a side body panel (126). The passive cooling system includes one or more heat pipes (112) having an evaporator section (118) embedded in the overheated internal component and a condenser section (120) at the external portion (116) of the vehicle (114). The evaporator (118) and condenser (120) sections are in fluid communication. The passive cooling system may also include a thermally conductive film (140) for thermally connecting the evaporator sections (118) of the heat pipes (112) to each other and to the instrument panel (100).

Wake Vortex Inverse Model User's Guide

NASA Technical Reports Server (NTRS)

Lai, David; Delisi, Donald

2008-01-01

NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input file, with preferred parameters values, is given in Appendix A. An example of the plot generated at a normal completion of the inversion is shown in Appendix B.

On the transonic aerodynamics of a compressor blade row

NASA Technical Reports Server (NTRS)

Erickson, J. C., Jr.; Lordi, J. A.; Rae, W. J.

1971-01-01

Linearized analyses have been carried out for the induced velocity and pressure fields within a compressor blade row operating in an infinite annulus at transonic Mach numbers of the flow relative to the blades. In addition, the relationship between the induced velocity and the shape of the mean blade surface has been determined. A computational scheme has been developed for evaluating the blade mean surface ordinates and surface pressure distributions. The separation of the effects of a specified blade thickness distribution from the effects of a specified distribution of the blade lift has been established. In this way, blade mean surface shapes that are necessary for the blades to be locally nonlifting have been computed and are presented for two examples of blades with biconvex parabolic arc sections of radially tapering thickness. Blade shapes that are required to achieve a zero thickness, uniform chordwise loading, constant work spanwise loading are also presented for two examples. In addition, corresponding surface pressure distributions are given. The flow relative to the blade tips has a high subsonic Mach number in the examples that have been computed. The results suggest that at near-sonic relative tip speeds the effective blade shape is dominated by the thickness distribution, with the lift distribution playing only a minor role.

Visualization of instationary flows by particle traces

NASA Astrophysics Data System (ADS)

Raasch, S.

An abstract on a study which represents a model of atmospheric flow output by computer movies is presented. The structure and evolution of the flow is visualized by starting weightless particles at the locations of the model grid points at distinct, equally spaced times. These particles are then only advected by the flow. In order to avoid useless accumulation of particles, they can be provided with a limited lifetime. Scalar quantities can be shown in addition to using color shaded contours as background information. A movie with several examples of atmospheric flows, for example convection in the atmospheric boundary layer, slope winds, land seabreeze and Kelvin-Helmholtz waves is presented. The simulations are performed by two dimensional and three dimensional nonhydrostatic, finite difference models. Graphics are produced by using the UNIRAS software and the graphic output is in form of CGM metafiles. The single frames are stored on an ABEKAS real time video disc and then transferred to a BETACAM-SP tape recorder. The graphic software is suitable to produce 2 dimensional pictures, for example only cross sections of three dimensional simulations can be made. To produce a movie of typically 90 seconds duration, the graphic software and the particle model need about 10 hours CPU time on a CCD CYBER 990 and the CGM metafile has a size of about 1.4 GByte.

Certification of highly complex safety-related systems.

PubMed

Reinert, D; Schaefer, M

1999-01-01

The BIA has now 15 years of experience with the certification of complex electronic systems for safety-related applications in the machinery sector. Using the example of machining centres this presentation will show the systematic procedure for verifying and validating control systems using Application Specific Integrated Circuits (ASICs) and microcomputers for safety functions. One section will describe the control structure of machining centres with control systems using "integrated safety." A diverse redundant architecture combined with crossmonitoring and forced dynamization is explained. In the main section the steps of the systematic certification procedure are explained showing some results of the certification of drilling machines. Specification reviews, design reviews with test case specification, statistical analysis, and walk-throughs are the analytical measures in the testing process. Systematic tests based on the test case specification, Electro Magnetic Interference (EMI), and environmental testing, and site acceptance tests on the machines are the testing measures for validation. A complex software driven system is always undergoing modification. Most of the changes are not safety-relevant but this has to be proven. A systematic procedure for certifying software modifications is presented in the last section of the paper.

30 CFR 285.543 - Example of how the inverse distance formula works.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Example of how the inverse distance formula works. 285.543 Section 285.543 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR... Financial Assurance Requirements Revenue Sharing with States § 285.543 Example of how the inverse distance...

77 FR 47169 - Clearing Requirement Determination Under Section 2(h) of the CEA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-07

... CDS on these indices is the U.S. dollar. \\40\\ S&P/ISDA have, for example, co-branded additional... example, when one of those corporate entities declares bankruptcy, it may trigger a credit event under the...Traxx family have significant volumes. For example, the iTraxx Europe Senior Financials referencing...

29 CFR 780.1008 - Examples of places not considered homes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Examples of places not considered homes. 780.1008 Section... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... considered homes. The following are examples of workplaces which, on examination, have been considered not to...

29 CFR 780.1008 - Examples of places not considered homes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Examples of places not considered homes. 780.1008 Section... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... considered homes. The following are examples of workplaces which, on examination, have been considered not to...

12 CFR 573.2 - Model privacy form and examples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 332.2 - Model privacy form and examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions...

12 CFR 216.2 - Model privacy form and examples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

12 CFR 40.2 - Model privacy form and examples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 1 2011-01-01 2011-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 332.2 - Model privacy form and examples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions...

12 CFR 573.2 - Model privacy form and examples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 5 2011-01-01 2011-01-01 false Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 40.2 - Model privacy form and examples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 216.2 - Model privacy form and examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 2 2012-01-01 2012-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

12 CFR 1016.2 - Model privacy form and examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Model privacy form and examples. 1016.2 Section 1016.2 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 1016.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 40.2 - Model privacy form and examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 216.2 - Model privacy form and examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 2 2013-01-01 2013-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

12 CFR 1016.2 - Model privacy form and examples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 8 2014-01-01 2014-01-01 false Model privacy form and examples. 1016.2 Section 1016.2 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 1016.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 573.2 - Model privacy form and examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 6 2012-01-01 2012-01-01 false Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 573.2 - Model privacy form and examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 1016.2 - Model privacy form and examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Model privacy form and examples. 1016.2 Section 1016.2 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 1016.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 332.2 - Model privacy form and examples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions...

12 CFR 332.2 - Model privacy form and examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the instructions...

12 CFR 216.2 - Model privacy form and examples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

12 CFR 40.2 - Model privacy form and examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 216.2 - Model privacy form and examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Model privacy form and examples. 216.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION (REGULATION P) § 216.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendix A of this part, consistent with the...

12 CFR 40.2 - Model privacy form and examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Model privacy form and examples. 40.2 Section 40.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 40.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

12 CFR 332.2 - Model privacy form and examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Model privacy form and examples. 332.2 Section... POLICY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 332.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions...

12 CFR 573.2 - Model privacy form and examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Model privacy form and examples. 573.2 Section 573.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION § 573.2 Model privacy form and examples. (a) Model privacy form. Use of the model...

Excimer Pumped Pulsed Tunable Dye Laser

NASA Astrophysics Data System (ADS)

Littman, Michael G.

1988-06-01

It has been recently shown and reported for the first time at this meeting, that Excimer pumping of a single-mode, short-cavity, grazing-incidence, longitudinally-pumped pulsed dye laser is feasible. In this paper the key concepts upon which this latest development is based are presented and are in a somewhat unusual form. This manuscript describes five specific dye laser examples. The five examples represent a progression from the simplest type of dye laser to the single-mode version mentioned above. The examples thus serve as a tutorial introduction to potential users of dye lasers. The article is organized into five sections or STEPS, each of which describes a different pulsed dye laser. Since the subtle points about dye lasers are best appreciated only after one actually attempts to build a working model, a PROCEDURES category is included in which details about the construction of the particular form of laser are given. As one reads through this category, think of it as looking over the shoulder of the laser builder. The NOTES category which follows is a brief but essential discussion explaining why various components and procedures are used, as well as how laser performance specifications are obtained. This subsection can he viewed as a discussion with the laser builder concerning the reasons for specific actions and choices made in the assembly of the example laser. The last category contains COMMENTS which provide additional related information pertaining to the example laser that goes beyond the earlier annotated discussion. If you like, these are the narrator's comments. At the end of the article, after the five sequential forms of the laser have been presented, there is a brief summation.

26 CFR 1.1502-93 - Consolidated section 382 limitation (or subgroup section 382 limitation).

Code of Federal Regulations, 2011 CFR

2011-04-01

... section 382 limitation) for any post-change year is an amount equal to the value of the loss group (or... regulations thereunder. See, for example, section 382(b)(2) (relating to the carryforward of unused section 382 limitation), section 382(b)(3)(B) (relating to the section 382 limitation for the post-change year...

26 CFR 1.1502-93 - Consolidated section 382 limitation (or subgroup section 382 limitation).

Code of Federal Regulations, 2013 CFR

2013-04-01

... section 382 limitation) for any post-change year is an amount equal to the value of the loss group (or... regulations thereunder. See, for example, section 382(b)(2) (relating to the carryforward of unused section 382 limitation), section 382(b)(3)(B) (relating to the section 382 limitation for the post-change year...

26 CFR 1.1502-93 - Consolidated section 382 limitation (or subgroup section 382 limitation).

Code of Federal Regulations, 2012 CFR

2012-04-01

... section 382 limitation) for any post-change year is an amount equal to the value of the loss group (or... regulations thereunder. See, for example, section 382(b)(2) (relating to the carryforward of unused section 382 limitation), section 382(b)(3)(B) (relating to the section 382 limitation for the post-change year...

29 CFR 780.158 - Examples of other practices within section 3(f) if requirements are met.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., for example, secretaries, clerks, bookkeepers, night watchmen, maintenance workers, engineers, and...), however; employees repairing equipment used by the employer in industrial or other nonfarming activities...

29 CFR 780.158 - Examples of other practices within section 3(f) if requirements are met.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., for example, secretaries, clerks, bookkeepers, night watchmen, maintenance workers, engineers, and...), however; employees repairing equipment used by the employer in industrial or other nonfarming activities...

Vertical accelerator device to apply loads simulating blast environments in the military to human surrogates.

PubMed

Yoganandan, Narayan; Pintar, Frank A; Schlick, Michael; Humm, John R; Voo, Liming; Merkle, Andrew; Kleinberger, Michael

2015-09-18

The objective of the study was to develop a simple device, Vertical accelerator (Vertac), to apply vertical impact loads to Post Mortem Human Subject (PMHS) or dummy surrogates because injuries sustained in military conflicts are associated with this vector; example, under-body blasts from explosive devices/events. The two-part mechanically controlled device consisted of load-application and load-receiving sections connected by a lever arm. The former section incorporated a falling weight to impact one end of the lever arm inducing a reaction at the other/load-receiving end. The "launch-plate" on this end of the arm applied the vertical impact load/acceleration pulse under different initial conditions to biological/physical surrogates, attached to second section. It is possible to induce different acceleration pulses by using varying energy absorbing materials and controlling drop height and weight. The second section of Vertac had the flexibility to accommodate different body regions for vertical loading experiments. The device is simple and inexpensive. It has the ability to control pulses and flexibility to accommodate different sub-systems/components of human surrogates. It has the capability to incorporate preloads and military personal protective equipment (e.g., combat helmet). It can simulate vehicle roofs. The device allows for intermittent specimen evaluations (x-ray and palpation, without changing specimen alignment). The two free but interconnected sections can be used to advance safety to military personnel. Examples demonstrating feasibilities of the Vertac device to apply vertical impact accelerations using PMHS head-neck preparations with helmet and booted Hybrid III dummy lower leg preparations under in-contact and launch-type impact experiments are presented. Published by Elsevier Ltd.

Scientific writing and the quality of papers: towards a higher impact.

PubMed

Cáceres, Ana Manhani; Gândara, Juliana Perina; Puglisi, Marina Leite

2011-12-01

Given the latent concern of scientists and editors on the quality of scientific writing, the aim of this paper was to present topics on the recommended structure of peer-reviewed papers. We described the key points of common sections of original papers and proposed two additional materials that may be useful for scientific writing: one particular guide to help the organization of the main ideas of the paper; and a table with examples of non desirable and desirable structures in scientific writing.

Classrooms of the Future. A Thirty-Three Act Play with an Ever-Changing Cast; Out of the Spotlight; Selected Acts; The Perils and Promises of Technological Literacy: Three Case Studies; The Producers, the Critics, and the Glitch Factor.

ERIC Educational Resources Information Center

Landsberger, Joe; Krey, Cynthia L.; Moorhead, Alice

2001-01-01

This special section on the history and creators of COTF VII describe the process for creating a conference on technology in education using the example of the Minnesota-based Classrooms of the Future Symposia presented by colleges and universities in the Twin Cities area. Highlights include the role of technology in instruction; promotional…

Operant conditioning-based behavior modification: one approach to treating somatic disorders.

PubMed

LeBow, M D

1975-01-01

The applicability of behavior modification as a process for treating somatic difficulties is examined within the framework of measurement, modification, and evaluation. Illustrations of this process are presented throughout. In particular, the last section of the paper gives an example of a currently operative and multifaceted approach to the problem of obesity. Among the topics considered herein are the use of behavioral contracts that specify ameliorative weight reduction practices and the assessment as well as manipulation of eating speed.

Risks to Navigation at the Matagorda Ship Channel Entrance, Texas, Phase 2: Evaluation of Significant Risk Factors

DTIC Science & Technology

2011-08-01

jetties are deteriorating. As a result of this deterioration and lowered beach and dunes adjacent to the jetties, there are overwash occurrences during...the toe . An example slope stability analysis is presented in Figure 51. This figure shows a typical cross section or model properties (soil layers...depth caused by the ship passage. Any area of influence will be localized and, in light of a critical gradient analysis, near- toe scouring effects

Vertical Plane Oscillation Experiments on a Series of Two-Dimensional SWATH Demi-Hull Sections

DTIC Science & Technology

1988-08-01

32 21. Example of repeatability of hydrodynamic coefficients for the Z1 gage, and wave TF1 , for model A...waves heights from probes 1 and 2 were divided by the heave oscillation amplitude to define radiated wave transfer functions , TF1 and TF2...delta2) and TF1 and TF2 are presented versus kB/2 on a single page for each combination of draft and amplitude tested. The plots are followed by the

Exact solution for flow in a porous pipe with unsteady wall suction and/or injection

NASA Astrophysics Data System (ADS)

Tsangaris, S.; Kondaxakis, D.; Vlachakis, N. W.

2007-10-01

This paper presents an extension of the exact solution of the steady laminar axisymmetric flow in a straight pipe of circular cross section with porous wall, given by R.M. Terrill, to the case of unsteady wall injection and/or suction. The cases of the pulsating parabolic profile and of the developed pulsating flow are investigated as examples. The pulsating flow in porous ducts has many applications in biomedical engineering and in other engineering areas.

Reliability of engineering methods of assessment the critical buckling load of steel beams

NASA Astrophysics Data System (ADS)

Rzeszut, Katarzyna; Folta, Wiktor; Garstecki, Andrzej

2018-01-01

In this paper the reliability assessment of buckling resistance of steel beam is presented. A number of parameters such as: the boundary conditions, the section height to width ratio, the thickness and the span are considered. The examples are solved using FEM procedures and formulas proposed in the literature and standards. In the case of the numerical models the following parameters are investigated: support conditions, mesh size, load conditions, steel grade. The numerical results are compared with approximate solutions calculated according to the standard formulas. It was observed that for high slenderness section the deformation of the cross-section had to be described by the following modes: longitudinal and transverse displacement, warping, rotation and distortion of the cross section shape. In this case we face interactive buckling problem. Unfortunately, neither the EN Standards nor the subject literature give close-form formulas to solve these problems. For this reason the reliability of the critical bending moment calculations is discussed.

Thin-sectioning and microanalysis of individual extraterrestrial particles

NASA Technical Reports Server (NTRS)

Bradley, J. P.

1986-01-01

A long standing constraint on the study of micrometeorites has centered on difficulties in preparing them for analysis. This is due largely to their small dimensions and consequent practical limitations on sample manipulation. Chondritic micrometeorites provide a good example; although much has been learned about their chemistry and mineralogy almost nothing was known about such basic properties as texture and petrographic associations. The only way to assess such properties is to examine microstructure indigenous to the particles. Unfortunately, almost all micrometeorites, out of necessity, have been crushed and dispersed onto appropriate substances prior to analysis, and most information about texture and petrography was lost. Recently, thin-sections of individual extraterrestrial particles have been prepared using an ultramicrotome equipped with a diamond knife. This procedure has been applied to stratospheric micrometeorites and Solar Max impact debris. In both cases the sections have enabled observation of a variety of internal particle features, including textures, porosity, and petrographic associations. The sectioning procedure is described and analysis results for chondritic micrometeoroids and select particles from Solar Max are presented.

First results from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

NASA Technical Reports Server (NTRS)

Vane, Gregg

1987-01-01

After engineering flights aboard the NASA U-2 research aircraft in the winter of 1986 to 1987 and spring of 1987, extensive data collection across the United States was begun with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) in the summer of 1987 in support of a NASA data evaluation and technology assessment program. This paper presents some of the first results obtained from AVIRIS. Examples of spectral imagery acquired over Mountain View and Mono Lake, California, and the Cuprite Mining District in western Nevada are presented. Sensor performance and data quality are described, and in the final section of this paper, plans for the future are discussed.

Human-factors engineering for smart transport: design support for car drivers and train traffic controllers.

PubMed

Lenior, Dick; Janssen, Wiel; Neerincx, Mark; Schreibers, Kirsten

2006-07-01

The theme Smart Transport can be described as adequate human-system symbiosis to realize effective, efficient and human-friendly transport of goods and information. This paper addresses how to attune automation to human (cognitive) capacities (e.g. to take care of information uncertainty, operator trust and mutual man-machine adaptations). An introduction to smart transport is presented, including examples of best practice for engineering human factors in the vehicle ergonomics and train traffic control domain. The examples are representative of an ongoing trend in automation and they show how the human role changes from controller to supervisor. Section 2 focuses on the car driver and systems that support, or sometimes even take over, critical parts of the driving task. Due to the diversity of driver ability, driving context and dependence between driver and context factors, there is a need for personalised, adaptive and integrated support. Systematic research is needed to establish sound systems. Section 3 focuses on the train dispatcher support systems that predict train movements, detect potential conflicts and show the dispatcher the possibilities available to solve the detected problems. Via thorough analysis of both the process to be controlled and the dispatcher's tasks and cognitive needs, support functions were developed as part of an already very complex supervision and control system. The two examples, although from a different field, both show the need for further development in cognitive modelling as well as for the value of sound ergonomics task analysis in design practice.

26 CFR 1.941-3 - Illustration of principles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) INCOME TAXES (CONTINUED) China Trade Act Corporations § 1.941-3 Illustration of principles. The application of section 941 may be illustrated by the following example: Example. (1) The A Company, a China...

26 CFR 1.941-3 - Illustration of principles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... (CONTINUED) INCOME TAXES (CONTINUED) China Trade Act Corporations § 1.941-3 Illustration of principles. The application of section 941 may be illustrated by the following example: Example. (1) The A Company, a China...

26 CFR 1.941-3 - Illustration of principles.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) INCOME TAXES (CONTINUED) China Trade Act Corporations § 1.941-3 Illustration of principles. The application of section 941 may be illustrated by the following example: Example. (1) The A Company, a China...

26 CFR 1.941-3 - Illustration of principles.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) INCOME TAXES China Trade Act Corporations § 1.941-3 Illustration of principles. The application of section 941 may be illustrated by the following example: Example. (1) The A Company, a China Trade...

26 CFR 1.941-3 - Illustration of principles.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) INCOME TAXES (CONTINUED) China Trade Act Corporations § 1.941-3 Illustration of principles. The application of section 941 may be illustrated by the following example: Example. (1) The A Company, a China...

12 CFR 557.12 - What are some examples of preempted state laws affecting deposits?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false What are some examples of preempted state laws affecting deposits? 557.12 Section 557.12 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY DEPOSITS Deposit Activities of Federal Savings Associations § 557.12 What are some examples of...

25 CFR 309.16 - What are examples of regalia that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of regalia that are Indian products? 309.16 Section 309.16 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.16 What are examples of regalia that are Indian products? (a...

25 CFR 309.11 - What are examples of jewelry that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of jewelry that are Indian products? 309.11 Section 309.11 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.11 What are examples of jewelry that are Indian products? (a...

25 CFR 309.15 - What are examples of apparel that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of apparel that are Indian products? 309.15 Section 309.15 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.15 What are examples of apparel that are Indian products? (a...

25 CFR 309.17 - What are examples of woodwork that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of woodwork that are Indian products? 309.17 Section 309.17 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.17 What are examples of woodwork that are Indian products? (a...

12 CFR 716.2 - Model privacy form and examples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in appendixA of this part, consistent with the instructions in appendixA...

12 CFR 716.2 - Model privacy form and examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions in Appendix...

12 CFR 716.2 - Model privacy form and examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions in Appendix...

12 CFR 716.2 - Model privacy form and examples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Model privacy form and examples. 716.2 Section... PRIVACY OF CONSUMER FINANCIAL INFORMATION § 716.2 Model privacy form and examples. (a) Model privacy form. Use of the model privacy form in Appendix A of this part, consistent with the instructions in Appendix...

25 CFR 309.15 - What are examples of apparel that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of apparel that are Indian products? 309.15 Section 309.15 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.15 What are examples of apparel that are Indian products? (a...

25 CFR 309.11 - What are examples of jewelry that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of jewelry that are Indian products? 309.11 Section 309.11 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.11 What are examples of jewelry that are Indian products? (a...

25 CFR 309.17 - What are examples of woodwork that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of woodwork that are Indian products? 309.17 Section 309.17 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.17 What are examples of woodwork that are Indian products? (a...

25 CFR 309.16 - What are examples of regalia that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of regalia that are Indian products? 309.16 Section 309.16 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.16 What are examples of regalia that are Indian products? (a...

41 CFR 102-5.80 - What are some examples of positions that may involve field work?

Code of Federal Regulations, 2010 CFR

2010-07-01

... of positions that may involve field work? 102-5.80 Section 102-5.80 Public Contracts and Property...-HOME-TO-WORK TRANSPORTATION Authorizing Home-to-Work Transportation § 102-5.80 What are some examples of positions that may involve field work? Examples of positions that may involve field work include...

41 CFR 102-5.80 - What are some examples of positions that may involve field work?

Code of Federal Regulations, 2013 CFR

2013-07-01

... of positions that may involve field work? 102-5.80 Section 102-5.80 Public Contracts and Property...-HOME-TO-WORK TRANSPORTATION Authorizing Home-to-Work Transportation § 102-5.80 What are some examples of positions that may involve field work? Examples of positions that may involve field work include...

41 CFR 102-5.80 - What are some examples of positions that may involve field work?

Code of Federal Regulations, 2012 CFR

2012-01-01

... of positions that may involve field work? 102-5.80 Section 102-5.80 Public Contracts and Property...-HOME-TO-WORK TRANSPORTATION Authorizing Home-to-Work Transportation § 102-5.80 What are some examples of positions that may involve field work? Examples of positions that may involve field work include...

41 CFR 102-5.80 - What are some examples of positions that may involve field work?

Code of Federal Regulations, 2011 CFR

2011-01-01

... of positions that may involve field work? 102-5.80 Section 102-5.80 Public Contracts and Property...-HOME-TO-WORK TRANSPORTATION Authorizing Home-to-Work Transportation § 102-5.80 What are some examples of positions that may involve field work? Examples of positions that may involve field work include...

41 CFR 102-5.80 - What are some examples of positions that may involve field work?

Code of Federal Regulations, 2014 CFR

2014-01-01

... of positions that may involve field work? 102-5.80 Section 102-5.80 Public Contracts and Property...-HOME-TO-WORK TRANSPORTATION Authorizing Home-to-Work Transportation § 102-5.80 What are some examples of positions that may involve field work? Examples of positions that may involve field work include...

Radar cross section fundamentals for the aircraft designer

NASA Technical Reports Server (NTRS)

Stadmore, H. A.

1979-01-01

Various aspects of radar cross-section (RCS) techniques are summarized, with emphasis placed on fundamental electromagnetic phenomena, such as plane and spherical wave formulations, and the definition of RCS is given in the far-field sense. The basic relationship between electronic countermeasures and a signature level is discussed in terms of the detectability range of a target vehicle. Fundamental radar-signature analysis techniques, such as the physical-optics and geometrical-optics approximations, are presented along with examples in terms of aircraft components. Methods of analysis based on the geometrical theory of diffraction are considered and various wave-propagation phenomena are related to local vehicle geometry. Typical vehicle components are also discussed, together with their contribution to total vehicle RCS and their individual signature sensitivities.

Vitreous cinematography in the study of vitreoretinal diseases.

PubMed

Trempe, C L; Takahashi, M; Freeman, H M

1981-07-01

A new technique of vitreous cinematography involves scanning of the vitreous cavity using optical sections to provide objective, reproducible information on the dynamics of the posterior vitreous and vitreoretinal relationships. Using a newly developed preset lens (El Bayadi-Kajiura lens), this technique makes it possible to document an entire optical section of the posterior vitreous. This is done by mechanically displacing the vitreous so that maximum reflectivity can be obtained from the vitreous gel. This article describes the technique and presents clinical examples documenting complete and incomplete vitreous detachment in normal eyes, Cloquet's canal associated with an optic disc pit, vitreous traction associated with a lamellar hole in an area of preretinal macular fibrosis, and vitreous traction at the anterior flap of a retinal break.

A subtraction scheme for computing QCD jet cross sections at NNLO: integrating the iterated singly-unresolved subtraction terms

NASA Astrophysics Data System (ADS)

Bolzoni, Paolo; Somogyi, Gábor; Trócsányi, Zoltán

2011-01-01

We perform the integration of all iterated singly-unresolved subtraction terms, as defined in ref. [1], over the two-particle factorized phase space. We also sum over the unresolved parton flavours. The final result can be written as a convolution (in colour space) of the Born cross section and an insertion operator. We spell out the insertion operator in terms of 24 basic integrals that are defined explicitly. We compute the coefficients of the Laurent expansion of these integrals in two different ways, with the method of Mellin-Barnes representations and sector decomposition. Finally, we present the Laurent-expansion of the full insertion operator for the specific examples of electron-positron annihilation into two and three jets.

26 CFR 1.1502-94A - Coordination with section 382 and the regulations thereunder when a corporation becomes a member...

Code of Federal Regulations, 2010 CFR

2010-04-01

... treated under § 1.1502-21(c) or 1.1502-21T(c) in effect prior to June 25, 1999, as contained in 26 CFR.... See section 382(a) and § 1.1502-96A(c) for the continuing effect of an ownership change after a... following examples illustrate the principles of this paragraph (b). Example 1. Basic case. (a) A and P each...

26 CFR 1.1502-93 - Consolidated section 382 limitation (or subgroup section 382 limitation).

Code of Federal Regulations, 2010 CFR

2010-04-01

...) for any post-change year is an amount equal to the value of the loss group (or loss subgroup), as.... See, for example, section 382(b)(2) (relating to the carryforward of unused section 382 limitation), section 382(b)(3)(B) (relating to the section 382 limitation for the post-change year that includes the...

Nanotube junctions

DOEpatents

Crespi, Vincent Henry; Cohen, Marvin Lou; Louie, Steven Gwon; Zettl, Alexander Karlwalte

2004-12-28

The present invention comprises a new nanoscale metal-semiconductor, semiconductor-semiconductor, or metal-metal junction, designed by introducing topological or chemical defects in the atomic structure of the nanotube. Nanotubes comprising adjacent sections having differing electrical properties are described. These nanotubes can be constructed from combinations of carbon, boron, nitrogen and other elements. The nanotube can be designed having different indices on either side of a junction point in a continuous tube so that the electrical properties on either side of the junction vary in a useful fashion. For example, the inventive nanotube may be electrically conducting on one side of a junction and semiconducting on the other side. An example of a semiconductor-metal junction is a Schottky barrier. Alternatively, the nanotube may exhibit different semiconductor properties on either side of the junction. Nanotubes containing heterojunctions, Schottky barriers, and metal-metal junctions are useful for microcircuitry.

Nanotube junctions

DOEpatents

Crespi, Vincent Henry; Cohen, Marvin Lou; Louie, Steven Gwon Sheng; Zettl, Alexander Karlwalter

2003-01-01

The present invention comprises a new nanoscale metal-semiconductor, semiconductor-semiconductor, or metal-metal junction, designed by introducing topological or chemical defects in the atomic structure of the nanotube. Nanotubes comprising adjacent sections having differing electrical properties are described. These nanotubes can be constructed from combinations of carbon, boron, nitrogen and other elements. The nanotube can be designed having different indices on either side of a junction point in a continuous tube so that the electrical properties on either side of the junction vary in a useful fashion. For example, the inventive nanotube may be electrically conducting on one side of a junction and semiconducting on the other side. An example of a semiconductor-metal junction is a Schottky barrier. Alternatively, the nanotube may exhibit different semiconductor properties on either side of the junction. Nanotubes containing heterojunctions, Schottky barriers, and metal-metal junctions are useful for microcircuitry.

VE at Scope Time (VEST): Three construction examples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sperling, R.B.

1991-04-01

Value Engineering at Scope Time (VEST)'' was published in Value World, January-February-March 1991. That article describes VEST as a four-phase process utilizing the heart'' of VE methodology, which is designed to be used with members of construction design teams to help them focus on the scope of work by doing cost modeling, function analysis, brainstorming and evaluation of ideas. With minimal training designers, architects and engineers can become energized to find creative design solutions and learn an effective, synergistic team approach to facilities design projects using VEST. If time is available, the team can begin the development of some highermore » ranked ideas into preliminary proposals. This paper is an expansion of that article, adding a brief section on training and presenting three examples of VEST on construction projects at a federally-funded research Laboratory.« less

Cantilever Beam Natural Frequencies in Centrifugal Inertia Field

NASA Astrophysics Data System (ADS)

Jivkov, V. S.; Zahariev, E. V.

2018-03-01

In the advanced mechanical science the well known fact is that the gravity influences on the natural frequencies and modes even for the vertical structures and pillars. But, the condition that should be fulfilled in order for the gravity to be taken into account is connected with the ration between the gravity value and the geometrical cross section inertia. The gravity is related to the earth acceleration but for moving structures there exist many other acceleration exaggerated forces and such are forces caused by the centrifugal accelerations. Large rotating structures, as wind power generators, chopper wings, large antennas and radars, unfolding space structures and many others are such examples. It is expected, that acceleration based forces influence on the structure modal and frequency properties, which is a subject of the present investigations. In the paper, rotating beams are subject to investigations and modal and frequency analysis is carried out. Analytical dependences for the natural resonances are derived and their dependences on the angular velocity and centrifugal accelerations are derived. Several examples of large rotating beams with different orientations of the rotating shaft are presented. Numerical experiments are conducted. Time histories of the beam tip deflections, that depict the beam oscillations are presented.

76 FR 58953 - Endangered and Threatened Wildlife and Plants; Determination of Endangered Status for Casey's...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-22

... impacted by small projects (for example, single home lots and pipeline development). Hovore (2003, p. 4... limited to upland terrace habitat. For example, entire sections of Palm Canyon [[Page 58958

Nonlinear and non-Hermitian optical systems applied to the development of filters and optical sensors

NASA Astrophysics Data System (ADS)

Amaro de Faria Júnior, A. C.

2015-09-01

In this work we present a method of investigation of nonlinear optical beams generated from non-Hermitian optical systems1 . This method can be applied in the development of optical filters and optical sensors to process, analyze and choose the passband of the propagation modes of an optical pulse from an non-Hermitian optical system. Non-Hermitian optical systems can be used to develop optical fiber sensors that suppress certain propagation modes of optical pulses that eventually behave as quantum noise. Such systems are described by the Nonlinear Schrödinger-like Equation with Parity-Time (PT) Symmetric Optical Potentials. There are optical fiber sensors that due to high laser intensity and frequency can produce quantum noise, such as Raman and Brillouin scattering. However, the optical fiber, for example, can be designed so that its geometry suppress certain propagation modes of the beam. We apply some results of non- Hermitian optical systems with PT symmetry to simulate optical lattice by a appropriate potential function, which among other applications, can naturally suppress certain propagation modes of an optical beam propagating through a waveguide. In other words, the optical system is modeled by a potential function in the Nonlinear Schrödinger-like Equation that one relates with the geometric aspects of the wave guides and with the optical beam interacting with the waveguide material. The paper is organized as follows: sections 1 and 2 present a brief description about nonlinear optical systems and non-Hermitian optical systems with PT symmetry. Section 3 presents a description of the dynamics of nonlinear optical pulses propagating through optical networks described by a optical potential non-Hermitian. Sections 4 and 5 present a general description of this non-Hermitian optical systems and how to get them from a more general model. Section 6 presents some conclusions and comment and the final section presents the references. Begin the abstract two lines below author names and addresses.

Low-order aberration coefficients applied to design of telescopes with freeform surfaces

NASA Astrophysics Data System (ADS)

Stone, Bryan D.; Howard, Joseph M.

2017-09-01

As the number of smallsats and cubesats continues to increase [1], so does the interest in the space optics community to miniaturize reflective optical instrumentation for these smaller platforms. Applications of smallsats are typically for the Earth observing community, but recently opportunities for them are being made available for planetary science, heliophysics and astrophysics concepts [2]. With the smaller satellite platforms come reduced instrument sizes that they accommodate, but the specifications such as field of view and working f/# imposed on the smaller optical systems are often the same, or even more challenging. To meet them, and to "fit in the box", it is necessary to employ additional degrees of freedom to the optical design. An effective strategy to reduce package size is to remove rotational symmetry constraints on the system layout, allowing it to minimize the unused volume by applying rigid body tilts and decenters to mirrors. Requirements for faster systems and wider fields of view can be addressed by allowing optical surfaces to become "freeform" in shape, essentially removing rotational symmetry constraints on the mirrors themselves. This dual approach not only can reduce package size, but also can allow for increased fields of view with improved image quality. Tools were developed in the 1990s to compute low-order coefficients of the imaging properties of asymmetric tilted and decentered systems [3][4]. That approach was then applied to reflective systems with plane symmetry, where the coefficients were used to create closed-form constraints to reduce the number of degrees of freedom of the design space confronting the designer [5][6]. In this paper we describe the geometric interpretation of these coefficients for systems with a plane of symmetry, and discuss some insights that follow for the design of systems without closed-form constraints. We use a common three-mirror design form example to help illustrate these concepts, and incorporate freeform surfaces for each mirror shape. In section II, we evoke the typical form of the wave aberration function taught in most texts on geometrical optics, and then recast it into a general form that no longer assumes rotational symmetry. A freeform surface definition for mirrors is then defined, and the example three-mirror system used throughout this paper is introduced. In section III, the first-order coefficients of the plane symmetric system are discussed, and then the second-order in section IV. In both of these discussions, the example system is perturbed to present the explicit form of the aberration coefficient laid out in section II, and plots are presented using optical design software. Finally, some concluding remarks are given in section V.

Investigation of the influence of the neutron spectrum in determinations of integral cross-section ratios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, D.L.

1987-11-01

Ratio measurements are routinely employed in studies of neutron interaction processes in order to generate new differential cross-section data or to test existing differential cross-section information through examination of the corresponding response in integral neutron spectra. Interpretation of such data requires that careful attention be given to details of the neutron spectra involved in these measurements. Two specific tasks are undertaken in the present investigation: (1) Using perturbation theory, a formula is derived which permits one to relate the ratio measured in a realistic quasimonoenergetic spectrum to the desired pure monoenergetic ratio. This expression involves only the lowest-order moments ofmore » the neutron energy distribution and corresponding parameters which serve to characterize the energy dependence of the differential cross sections, quantities which can generally be estimated with reasonable precision from the uncorrected data or from auxiliary information. (2) Using covariance methods, a general formalism is developed for calculating the uncertainty of a measured integral cross-section ratio which involves an arbitrary neutron spectrum. This formalism is employed to further examine the conditions which influence the sensitivity of such measured ratios to details of the neutron spectra and to their uncertainties. Several numerical examples are presented in this report in order to illustrate these principles, and some general conclusion are drawn concerning the development and testing of neutron cross-section data by means of ratio experiments. 16 refs., 1 fig., 4 tabs.« less

25 CFR 309.20 - What are examples of sculpture, carving, and pipes that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of sculpture, carving, and pipes that are Indian products? 309.20 Section 309.20 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.20 What are examples of sculpture, carving...

25 CFR 309.21 - What are examples of dolls and toys that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of dolls and toys that are Indian products? 309.21 Section 309.21 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.21 What are examples of dolls and toys that are Indian...

26 CFR 1.863-8 - Source of income derived from space and ocean activity under section 863(d).

Code of Federal Regulations, 2013 CFR

2013-04-01

... because S's rights, title, and interest in the data pass to C in the United States. Example 7. Use of... example, satellites) or transponders located in space; (C) Licensing of technology or other intangibles... of a vessel that does not transport cargo or persons for hire between ports-of-call (for example, the...

26 CFR 1.863-8 - Source of income derived from space and ocean activity under section 863(d).

Code of Federal Regulations, 2012 CFR

2012-04-01

... because S's rights, title, and interest in the data pass to C in the United States. Example 7. Use of... example, satellites) or transponders located in space; (C) Licensing of technology or other intangibles... of a vessel that does not transport cargo or persons for hire between ports-of-call (for example, the...

26 CFR 1.863-8 - Source of income derived from space and ocean activity under section 863(d).

Code of Federal Regulations, 2010 CFR

2010-04-01

... because S's rights, title, and interest in the data pass to C in the United States. Example 7. Use of... example, satellites) or transponders located in space; (C) Licensing of technology or other intangibles... of a vessel that does not transport cargo or persons for hire between ports-of-call (for example, the...

25 CFR 309.20 - What are examples of sculpture, carving, and pipes that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of sculpture, carving, and pipes that are Indian products? 309.20 Section 309.20 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.20 What are examples of sculpture, carving...

25 CFR 309.21 - What are examples of dolls and toys that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of dolls and toys that are Indian products? 309.21 Section 309.21 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.21 What are examples of dolls and toys that are Indian...

Browsing software of the Visible Korean data used for teaching sectional anatomy.

PubMed

Shin, Dong Sun; Chung, Min Suk; Park, Hyo Seok; Park, Jin Seo; Hwang, Sung Bae

2011-01-01

The interpretation of computed tomographs (CTs) and magnetic resonance images (MRIs) to diagnose clinical conditions requires basic knowledge of sectional anatomy. Sectional anatomy has traditionally been taught using sectioned cadavers, atlases, and/or computer software. The computer software commonly used for this subject is practical and efficient for students but could be more advanced. The objective of this research was to present browsing software developed from the Visible Korean images that can be used for teaching sectional anatomy. One thousand seven hundred and two sets of MRIs, CTs, and sectioned images (intervals, one millimeter) of a whole male cadaver were prepared. Over 900 structures in the sectioned images were outlined and then filled with different colors to elaborate each structure. Software was developed where four corresponding images could be displayed simultaneously; in addition, the structures in the image data could be readily recognized with the aid of the color-filled outlines. The software, distributed free of charge, could be a valuable tool to teach medical students. For example, sectional anatomy could be taught by showing the sectioned images with real color and high resolution. Students could then review the lecture by using the sectioned and color-filled images on their own computers. Students could also be evaluated using the same software. Furthermore, other investigators would be able to replace the images for more comprehensive sectional anatomy. Copyright © 2011 Wiley-Liss, Inc.

Survey of Software Assurance Techniques for Highly Reliable Systems

NASA Technical Reports Server (NTRS)

Nelson, Stacy

2004-01-01

This document provides a survey of software assurance techniques for highly reliable systems including a discussion of relevant safety standards for various industries in the United States and Europe, as well as examples of methods used during software development projects. It contains one section for each industry surveyed: Aerospace, Defense, Nuclear Power, Medical Devices and Transportation. Each section provides an overview of applicable standards and examples of a mission or software development project, software assurance techniques used and reliability achieved.

26 CFR 1.215-1 - Periodic alimony, etc., payments.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section 215: Example 1. Pursuant to the terms of a decree of divorce, H, in 1956, transferred securities... are not deductible from his income. Example 2. A decree of divorce obtained by W from H incorporated a...

An overview of the health economic implications of elective caesarean section.

PubMed

Petrou, Stavros; Khan, Kamran

2013-12-01

The caesarean section rate has continued to increase in most industrialised countries, which raises a number of economic concerns. This review provides an overview of the health economic implications of elective caesarean section. It provides a succinct summary of the health consequences associated with elective caesarean section for both the infant and the mother over the perinatal period and beyond. It highlights factors that complicate our understanding of the health consequences of elective caesarean section, including inconsistencies in definitions and coding of the procedure, failure to adopt an intention-to-treat principle when drawing comparisons, and the widespread reliance on observational data. The paper then summarises the economic costs associated with elective caesarean section. Evidence is presented to suggest that planned caesarean section may be less costly than planned vaginal birth in some clinical contexts, for example where the singleton fetus lies in a breech position at term. In contrast, elective caesarean section (or caesarean section as a whole) appears to be more costly than vaginal delivery (either spontaneous or instrumented) in low-risk or unselected populations. The paper proceeds with an overview of economic evaluations associated with elective caesarean section. All are currently based on decision-analytic models. Evidence is presented to suggest that planned trial of labour (attempted vaginal birth) following a previous caesarean section appears to be a more cost-effective option than elective caesarean section, although its cost effectiveness is dependent upon the probability of successful vaginal delivery. There is conflicting evidence on the cost effectiveness of maternal request caesareans when compared with trial of labour. The paucity of evidence on the value pregnant women, clinicians and other groups in society place on the option of elective caesarean section is highlighted. Techniques that might be used to elicit preferences for elective caesarean section and its attributes are outlined. The review concludes with directions for future research in this area.

26 CFR 1.1374-6 - Credits and credit carryforwards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... income described in section 55(b)(2). (c) Examples. The rules of this section are illustrated by the... under the rules applying to C corporations. Any other credits or credit carryforwards, such as foreign... 1374 tax are subject to the limitations described in section 38(c) and section 53(c), respectively, as...

26 CFR 1.1374-6 - Credits and credit carryforwards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... income described in section 55(b)(2). (c) Examples. The rules of this section are illustrated by the... under the rules applying to C corporations. Any other credits or credit carryforwards, such as foreign... 1374 tax are subject to the limitations described in section 38(c) and section 53(c), respectively, as...

26 CFR 1.1374-6 - Credits and credit carryforwards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... income described in section 55(b)(2). (c) Examples. The rules of this section are illustrated by the... under the rules applying to C corporations. Any other credits or credit carryforwards, such as foreign... 1374 tax are subject to the limitations described in section 38(c) and section 53(c), respectively, as...

26 CFR 1.1374-6 - Credits and credit carryforwards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... income described in section 55(b)(2). (c) Examples. The rules of this section are illustrated by the... under the rules applying to C corporations. Any other credits or credit carryforwards, such as foreign... 1374 tax are subject to the limitations described in section 38(c) and section 53(c), respectively, as...

26 CFR 1.1502-33 - Earnings and profits.

Code of Federal Regulations, 2011 CFR

2011-04-01

... has no effect on the earnings and profits of P and S.) Example 2. Section 355 distribution. (a) Facts... section 312(h). Thus, P's earnings and profits rather than S's earnings and profits may be eliminated...) of this section, P's earnings and profits may be reduced under section 312(h) as a result of the...

26 CFR 1.1502-33 - Earnings and profits.

Code of Federal Regulations, 2012 CFR

2012-04-01

... has no effect on the earnings and profits of P and S.) Example 2. Section 355 distribution. (a) Facts... section 312(h). Thus, P's earnings and profits rather than S's earnings and profits may be eliminated...) of this section, P's earnings and profits may be reduced under section 312(h) as a result of the...

26 CFR 1.1502-33 - Earnings and profits.

Code of Federal Regulations, 2014 CFR

2014-04-01

... has no effect on the earnings and profits of P and S.) Example 2. Section 355 distribution. (a) Facts... section 312(h). Thus, P's earnings and profits rather than S's earnings and profits may be eliminated...) of this section, P's earnings and profits may be reduced under section 312(h) as a result of the...

26 CFR 1.1502-33 - Earnings and profits.

Code of Federal Regulations, 2013 CFR

2013-04-01

... has no effect on the earnings and profits of P and S.) Example 2. Section 355 distribution. (a) Facts... section 312(h). Thus, P's earnings and profits rather than S's earnings and profits may be eliminated...) of this section, P's earnings and profits may be reduced under section 312(h) as a result of the...

Applications and Engineering Analysis of Lotus Roots under External Water Pressure

PubMed Central

Wang, Chang Jiang; Mynors, Diane

2016-01-01

Engineers can learn from nature for inspirations to create new designs. The internal structure of lotus roots with several oval holes was studied in this paper for engineering inspirations. The structural performance of lotus roots under outside water pressure was simulated and compared with various cross-sectional areas. The distribution of stresses in the cross-sectional area of lotus roots was analysed and presented. It was found that the maximum compressive stresses in the cross-sectional area of lotus roots were occurring at the long axis ends of the holes. This was very different from that of circular holes. Further analysis on the triaxiality factors revealed that the cross-sectional area of the lotus root resulted in large areas of high triaxiality factors. The resulting hydrostatic stress in the cross-sectional area of lotus root ranges from zero to 2.7 times the applied outside pressure. In contrast, the hydrostatic stress in a cylindrical cross-sectional area is a fixed value. The study showed that the lotus root and the orientation of the oval holes could be mimicked in the design of new structures, for example, underwater pipes and vessels. PMID:28127228

Supercritical wing sections 2, volume 108

NASA Technical Reports Server (NTRS)

Bauer, F.; Garabedian, P.; Korn, D.; Jameson, A.; Beckmann, M. (Editor); Kuenzi, H. P. (Editor)

1975-01-01

A mathematical theory for the design and analysis of supercritical wing sections was previously presented. Examples and computer programs showing how this method works were included. The work on transonics is presented in a more definitive form. For design, a better model of the trailing edge is introduced which should eliminate a loss of fifteen or twenty percent in lift experienced with previous heavily aft loaded models, which is attributed to boundary layer separation. How drag creep can be reduced at off-design conditions is indicated. A rotated finite difference scheme is presented that enables the application of Murman's method of analysis in more or less arbitrary curvilinear coordinate systems. This allows the use of supersonic as well as subsonic free stream Mach numbers and to capture shock waves as far back on an airfoil as desired. Moreover, it leads to an effective three dimensional program for the computation of transonic flow past an oblique wing. In the case of two dimensional flow, the method is extended to take into account the displacement thickness computed by a semi-empirical turbulent boundary layer correction.

Multilevel processes and cultural adaptation: Examples from past and present small-scale societies.

PubMed

Reyes-García, V; Balbo, A L; Gomez-Baggethun, E; Gueze, M; Mesoudi, A; Richerson, P; Rubio-Campillo, X; Ruiz-Mallén, I; Shennan, S

2016-12-01

Cultural adaptation has become central in the context of accelerated global change with authors increasingly acknowledging the importance of understanding multilevel processes that operate as adaptation takes place. We explore the importance of multilevel processes in explaining cultural adaptation by describing how processes leading to cultural (mis)adaptation are linked through a complex nested hierarchy, where the lower levels combine into new units with new organizations, functions, and emergent properties or collective behaviours. After a brief review of the concept of "cultural adaptation" from the perspective of cultural evolutionary theory and resilience theory, the core of the paper is constructed around the exploration of multilevel processes occurring at the temporal, spatial, social and political scales. We do so by examining small-scale societies' case studies. In each section, we discuss the importance of the selected scale for understanding cultural adaptation and then present an example that illustrates how multilevel processes in the selected scale help explain observed patterns in the cultural adaptive process. We end the paper discussing the potential of modelling and computer simulation for studying multilevel processes in cultural adaptation.

The potential impact of epidemiology on the prevention of occupational disease

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wegman, D.H.

1992-07-01

This presentation reviews occupational epidemiology as a foundation for workplace disease prevention activities. By examining descriptive, etiologic and intervention occupational epidemiology studies, a range of opportunities are illustrated where epidemiology has played, or could play a principal role in guiding preventive efforts. Descriptive studies presented include ones based on vital records, on epidemic investigations, cross-sectional surveys, and surveillance. Etiologic studies review the largely successful development of knowledge for lung cancer and asbestos exposure for pulmonary effects of isocyanate exposures. However, attention is also directed to the need for etiologic studies of work environment risks for both cardiovascular and musculoskeletal disease.more » Finally importance is placed on the too infrequent epidemiologic studies of intervention. Historical examples of control of large risks from nickel cancers and silicosis are balanced with more recent examples of successes at reducing smaller risks of cardiovascular disease and oil acne. Throughout, emphasis is placed on the importance of reintegrating the academic discipline of epidemiology into the application of study findings to prevention of workplace risks.67 references.« less

Multilevel processes and cultural adaptation: Examples from past and present small-scale societies

PubMed Central

Reyes-García, V.; Balbo, A. L.; Gomez-Baggethun, E.; Gueze, M.; Mesoudi, A.; Richerson, P.; Rubio-Campillo, X.; Ruiz-Mallén, I.; Shennan, S.

2016-01-01

Cultural adaptation has become central in the context of accelerated global change with authors increasingly acknowledging the importance of understanding multilevel processes that operate as adaptation takes place. We explore the importance of multilevel processes in explaining cultural adaptation by describing how processes leading to cultural (mis)adaptation are linked through a complex nested hierarchy, where the lower levels combine into new units with new organizations, functions, and emergent properties or collective behaviours. After a brief review of the concept of “cultural adaptation” from the perspective of cultural evolutionary theory and resilience theory, the core of the paper is constructed around the exploration of multilevel processes occurring at the temporal, spatial, social and political scales. We do so by examining small-scale societies’ case studies. In each section, we discuss the importance of the selected scale for understanding cultural adaptation and then present an example that illustrates how multilevel processes in the selected scale help explain observed patterns in the cultural adaptive process. We end the paper discussing the potential of modelling and computer simulation for studying multilevel processes in cultural adaptation. PMID:27774109

Object-oriented programming with mixins in Ada

NASA Technical Reports Server (NTRS)

Seidewitz, ED

1992-01-01

Recently, I wrote a paper discussing the lack of 'true' object-oriented programming language features in Ada 83, why one might desire them in Ada, and how they might be added in Ada 9X. The approach I took in this paper was to build the new object-oriented features of Ada 9X as much as possible on the basic constructs and philosophy of Ada 83. The object-oriented features proposed for Ada 9X, while different in detail, are based on the same kind of approach. Further consideration of this approach led me on a long reflection on the nature of object-oriented programming and its application to Ada. The results of this reflection, presented in this paper, show how a fairly natural object-oriented style can indeed be developed even in Ada 83. The exercise of developing this style is useful for at least three reasons: (1) it provides a useful style for programming object-oriented applications in Ada 83 until new features become available with Ada 9X; (2) it demystifies many of the mechanisms that seem to be 'magic' in most object-oriented programming languages by making them explicit; and (3) it points out areas that are and are not in need of change in Ada 83 to make object-oriented programming more natural in Ada 9X. In the next four sections I will address in turn the issues of object-oriented classes, mixins, self-reference and supertyping. The presentation is through a sequence of examples. This results in some overlap with that paper, but all the examples in the present paper are written entirely in Ada 83. I will return to considerations for Ada 9X in the last section of the paper.

A concept for holistic whole body MRI data analysis, Imiomics

PubMed Central

Malmberg, Filip; Johansson, Lars; Lind, Lars; Sundbom, Magnus; Ahlström, Håkan; Kullberg, Joel

2017-01-01

Purpose To present and evaluate a whole-body image analysis concept, Imiomics (imaging–omics) and an image registration method that enables Imiomics analyses by deforming all image data to a common coordinate system, so that the information in each voxel can be compared between persons or within a person over time and integrated with non-imaging data. Methods The presented image registration method utilizes relative elasticity constraints of different tissue obtained from whole-body water-fat MRI. The registration method is evaluated by inverse consistency and Dice coefficients and the Imiomics concept is evaluated by example analyses of importance for metabolic research using non-imaging parameters where we know what to expect. The example analyses include whole body imaging atlas creation, anomaly detection, and cross-sectional and longitudinal analysis. Results The image registration method evaluation on 128 subjects shows low inverse consistency errors and high Dice coefficients. Also, the statistical atlas with fat content intensity values shows low standard deviation values, indicating successful deformations to the common coordinate system. The example analyses show expected associations and correlations which agree with explicit measurements, and thereby illustrate the usefulness of the proposed Imiomics concept. Conclusions The registration method is well-suited for Imiomics analyses, which enable analyses of relationships to non-imaging data, e.g. clinical data, in new types of holistic targeted and untargeted big-data analysis. PMID:28241015

26 CFR 1.865-2 - Loss with respect to stock.

Code of Federal Regulations, 2010 CFR

2010-04-01

... paragraph (b)(1) may be illustrated by the following examples: Example 1. (i) P, a domestic corporation, is... domestic corporation, owns all of the stock of N1, which owns all of the stock of N2, which owns all of the... paragraph (a)(1) of this section. Example 3. (i) P, a domestic corporation, owns all of the stock of N1...

25 CFR 309.22 - What are examples of painting and other fine art forms that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of painting and other fine art forms that are Indian products? 309.22 Section 309.22 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.22 What are examples of painting and other...

25 CFR 309.18 - What are examples of hide, leatherwork, and fur that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of hide, leatherwork, and fur that are Indian products? 309.18 Section 309.18 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.18 What are examples of hide, leatherwork, and fur that...

25 CFR 309.13 - What are examples of other weaving and textiles that are Indian products?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are examples of other weaving and textiles that are Indian products? 309.13 Section 309.13 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.13 What are examples of other weaving and textiles that...

14 CFR 330.39 - What are examples of types of losses that the Department does not allow?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false What are examples of types of losses that the Department does not allow? 330.39 Section 330.39 Aeronautics and Space OFFICE OF THE SECRETARY... CARRIERS Application Procedures § 330.39 What are examples of types of losses that the Department does not...

25 CFR 309.22 - What are examples of painting and other fine art forms that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of painting and other fine art forms that are Indian products? 309.22 Section 309.22 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.22 What are examples of painting and other...

25 CFR 309.13 - What are examples of other weaving and textiles that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of other weaving and textiles that are Indian products? 309.13 Section 309.13 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.13 What are examples of other weaving and textiles that...

25 CFR 309.18 - What are examples of hide, leatherwork, and fur that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of hide, leatherwork, and fur that are Indian products? 309.18 Section 309.18 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.18 What are examples of hide, leatherwork, and fur that...

High-Power Broad-Area Diode Lasers and Laser Bars

NASA Astrophysics Data System (ADS)

Erbert, Goetz; Baerwolff, Arthur; Sebastian, Juergen; Tomm, Jens

This review presents the basic ideas and some examples of the chip technology of high-power diode lasers ( λ= 650,-1060,) in connection with the achievements of mounted single-stripe emitters in recent years.In the first section the optimization of the epitaxial layer structure for a low facet load and high conversion efficiency is discussed. The so-called broadened waveguide Large Optical Cavity (LOC) concept is described and also some advantages and disadvantages of Al-free material. The next section deals with the processing steps of epitaxial wafers to make single emitters and bars. Several possibilities to realize contact windows (implantation, insulators, and wet chemical oxidation) and laser mirrors are presented. The impact of heating in the CW regime and some aspects of reliability are the following topics. The calculation of thermal distributions in diode lasers, which shows the need for sophisticated mounting, will be given. In the last part the current state-of-the-art of single-stripe emitters will be reviewed.

An improved algorithm for the modeling of vapor flow in heat pipes

NASA Technical Reports Server (NTRS)

Tower, Leonard K.; Hainley, Donald C.

1989-01-01

A heat pipe vapor flow algorithm suitable for use in codes on microcomputers is presented. The incompressible heat pipe vapor flow studies of Busse are extended to incorporate compressibility effects. The Busse velocity profile factor is treated as a function of temperature and pressure. The assumption of a uniform saturated vapor temperature determined by the local pressure at each cross section of the pipe is not made. Instead, a mean vapor temperature, defined by an energy integral, is determined in the course of the solution in addition to the pressure, saturation temperature at the wall, and the Busse velocity profile factor. For alkali metal working fluids, local species equilibrium is assumed. Temperature and pressure profiles are presented for several cases involving sodium heat pipes. An example for a heat pipe with an adiabatic section and two evaporators in sequence illustrates the ability to handle axially varying heat input. A sonic limit plot for a short evaporator falls between curves for the Busse and Levy inviscid sonic limits.

An improved algorithm for the modeling of vapor flow in heat pipes

NASA Astrophysics Data System (ADS)

Tower, Leonard K.; Hainley, Donald C.

1989-12-01

A heat pipe vapor flow algorithm suitable for use in codes on microcomputers is presented. The incompressible heat pipe vapor flow studies of Busse are extended to incorporate compressibility effects. The Busse velocity profile factor is treated as a function of temperature and pressure. The assumption of a uniform saturated vapor temperature determined by the local pressure at each cross section of the pipe is not made. Instead, a mean vapor temperature, defined by an energy integral, is determined in the course of the solution in addition to the pressure, saturation temperature at the wall, and the Busse velocity profile factor. For alkali metal working fluids, local species equilibrium is assumed. Temperature and pressure profiles are presented for several cases involving sodium heat pipes. An example for a heat pipe with an adiabatic section and two evaporators in sequence illustrates the ability to handle axially varying heat input. A sonic limit plot for a short evaporator falls between curves for the Busse and Levy inviscid sonic limits.

Numerical analysis of composite STEEL-CONCRETE SECTIONS using integral equation of Volterra

NASA Astrophysics Data System (ADS)

Partov, Doncho; Kantchev, Vesselin

2011-09-01

The paper presents analysis of the stress and deflections changes due to creep in statically determinate composite steel-concrete beam. The mathematical model involves the equation of equilibrium, compatibility and constitutive relationship, i.e. an elastic law for the steel part and an integral-type creep law of Boltzmann — Volterra for the concrete part. On the basis of the theory of the viscoelastic body of Arutyunian-Trost-Bažant for determining the redistribution of stresses in beam section between concrete plate and steel beam with respect to time "t", two independent Volterra integral equations of the second kind have been derived. Numerical method based on linear approximation of the singular kernal function in the integral equation is presented. Example with the model proposed is investigated. The creep functions is suggested by the model CEB MC90-99 and the "ACI 209R-92 model. The elastic modulus of concrete E c (t) is assumed to be constant in time `t'. The obtained results from the both models are compared.

Technical aspects of telepathology with emphasis on future development.

PubMed

Schwarzmann, P; Binder, B; Klose, R

2000-01-01

Pathology undergoes presently changes due to new developments in diagnostic opportunities and cost saving efforts in health care. Out of the wide field of telepathology the paper selects three prototype applications: telepathology in teleeducation, expert advice for preselected details of a slide and finally telepathology for remote diagnosis. The most challenging field for remote diagnosis is the application in the frozen section scenario. The paper starts with the mental experiment to map conventional procedures to counterparts in telepathology. Technical opportunities and economical restrictions of telepathology equipment are discussed with respect to the components: electronic camera, display devices, haptic sensors and displays, available telecommunication channels and telepathology software. As an example and for illustration of the state of the art for an advanced telemicroscopy system able to perform remote frozen section diagnosis, the HISTKOM equipment is presented in more details. The section concerning future developments regards the aspects of the acceptance by tentative users, legal aspects, costs and affordability of equipment, the market for equipment components and the adequate telecommunication services. Further is regarded the mutual influence of properties of existing systems and application experiences gained with them on the next generation of equipment and application software. Conclusions and references close the paper.

Immunocytochemistry of the amphibian embryo--from overview to ultrastructure.

PubMed

Kurth, Thomas

2003-06-01

Amphibian embryos are standard research objects to study pattern formation and morphogenesis. Due to their external development and robust nature, experimental manipulations such as microinjections or transplantations can be easily performed. However, most immunocytochemical approaches addressing the specific localization of proteins are hampered by the fragility of the large and yolky embryonic cells which render high resolution staining difficult. Immunocytochemical data are therefore often restricted to either overall patterns in whole embryo preparations or to immunofluorescent localization with limited resolution on sections. High resolution or ultrastructural protein localization data are rare and can be achieved only with time consuming procedures. Here, a comparative study of immunocytochemical methods suitable for light and electron microscopy using different kinds of plastic resins is presented. Three main approaches are described: preembedding staining of whole embryos, postembedding staining of ultrathin sections and preembedding staining of vibratome sections. All the procedures are designed to study protein expression in early amphibian embryos en gros as well as en detail and the described techniques are suitable to combine two or three levels of resolution on the very same biological specimen. Examples are presented and advantages and disadvantages of the different protocols are discussed.

Mars atmospheric escape and evolution; interaction with the solar wind

NASA Astrophysics Data System (ADS)

Chassefière, Eric; Leblanc, François

2004-09-01

This tutorial deals with the question of atmospheric escape on Mars. After a brief introduction describing the general context of Mars escape studies, we will present in Section 2 a simplified theory of thermal escape, of both Jeans and hydrodynamic types. The phenomenon of hydrodynamic escape, still hypothetical and not proved to have ever existed on terrestrial planets, will be treated with the help of two well known examples: (i) the isotopic fractionation of xenon in Mars and Earth atmospheres, (ii) the paradox of missing oxygen in Venus atmosphere. In Section 3, a simplified approach of non-thermal escape will be developed, treating in a specific way the different kinds of escape (photochemical escape, ion sputtering, ion escape and ionospheric outflow). As a matter of illustration, some calculations of the relative contributions of these mechanisms, and of their time evolutions, will be given, and the magnitude of the total amount of atmosphere lost by non-thermal escape will be estimated. Section 4 will present the state of knowledge concerning the constraints derived from Mars isotopic geochemistry in terms of past escape and evolution. Finally, a few conclusions, which are more interrogations, will be proposed.

Application of finite difference techniques to noise propagation in jet engine ducts

NASA Technical Reports Server (NTRS)

Baumeister, K. J.

1973-01-01

A finite difference formulation is presented for wave propagation in a rectangular two-dimensional duct without steady flow. The difference technique, which should be used in the study of acoustically treated inlet and exhausts ducts used in turbofan engines, can readily handle acoustical flow field complications such as axial variations in wall impedance and cross-section area. In the numerical analysis, the continuous acoustic field is lumped into a series of grid points in which the pressure and velocity at each grid point are separated into real and imaginary terms. An example calculation is also presented for the sound attenuation in a two-dimensional straight soft-walled suppressor.

Application of finite difference techniques to noise propagation in jet engine ducts

NASA Technical Reports Server (NTRS)

Baumeister, K. J.

1973-01-01

A finite difference formulation is presented for wave propagation in a rectangular two-dimensional duct without steady flow. The difference technique, which should be useful in the study of acoustically treated inlet and exhausts ducts used in turbofan engines, can readily handle acoustical flow field complications such as axial variations in wall impedance and cross section area. In the numerical analysis, the continuous acoustic field is lumped into a series of grid points in which the pressure and velocity at each grid point are separated into real and imaginary terms. An example calculation is also presented for the sound attenuation in a two-dimensional straight soft-walled suppressor.

Managing change in health care organizations.

PubMed

Margulies, N

1977-08-01

The forces for change seem more potent today than ever before; increased technological advancement and rapid "societal upheavals" create a more critical need for change and a more significant need for skills to manage and channel change toward meaningful ends. The area of health care delivery is probably one of the fields most impinged upon and most affected by these turbulent times. Organizational development is presented herein as an approach to assist people in health care organizations with the problems of adaptation and change. A specific change strategy, action research, is discussed and a concrete case example is presented to illustrate the ways in which the action research model can be applied. Advantages and pitfalls are discussed in the concluding section.

Moire technique utilization for detection and measurement of scoliosis

NASA Astrophysics Data System (ADS)

Zawieska, Dorota; Podlasiak, Piotr

1993-02-01

Moire projection method enables non-contact measurement of the shape or deformation of different surfaces and constructions by fringe pattern analysis. The fringe map acquisition of the whole surface of the object under test is one of the main advantages compared with 'point by point' methods. The computer analyzes the shape of the whole surface and next user can selected different points or cross section of the object map. In this paper a few typical examples of an application of the moire technique in solving different medical problems will be presented. We will also present to you the equipment the moire pattern analysis is done in real time using the phase stepping method with CCD camera.

26 CFR 1.988-0 - Taxation of gain or loss from a section 988 transaction; Table of Contents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... from section 988. (b) Spot contract. (c) Nonfunctional currency. (d) Spot rate. (1) In general. (2) Consistency required in valuing transactions subject to section 988. (3) Use of certain spot rate conventions... currency. (g) Fair market value. (h) Interaction with sections 1092 and 1256 in examples. (i) Effective...

26 CFR 1.988-0 - Taxation of gain or loss from a section 988 transaction; Table of Contents.

Code of Federal Regulations, 2012 CFR

2012-04-01

... from section 988. (b) Spot contract. (c) Nonfunctional currency. (d) Spot rate. (1) In general. (2) Consistency required in valuing transactions subject to section 988. (3) Use of certain spot rate conventions... currency. (g) Fair market value. (h) Interaction with sections 1092 and 1256 in examples. (i) Effective...

26 CFR 1.988-0 - Taxation of gain or loss from a section 988 transaction; Table of Contents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... from section 988. (b) Spot contract. (c) Nonfunctional currency. (d) Spot rate. (1) In general. (2) Consistency required in valuing transactions subject to section 988. (3) Use of certain spot rate conventions... currency. (g) Fair market value. (h) Interaction with sections 1092 and 1256 in examples. (i) Effective...

26 CFR 1.988-0 - Taxation of gain or loss from a section 988 transaction; Table of Contents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... from section 988. (b) Spot contract. (c) Nonfunctional currency. (d) Spot rate. (1) In general. (2) Consistency required in valuing transactions subject to section 988. (3) Use of certain spot rate conventions... currency. (g) Fair market value. (h) Interaction with sections 1092 and 1256 in examples. (i) Effective...

40 CFR 1065.602 - Statistics.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Statistics. 1065.602 Section 1065.602... PROCEDURES Calculations and Data Requirements § 1065.602 Statistics. (a) Overview. This section contains equations and example calculations for statistics that are specified in this part. In this section we use...

Pressure-actuated cellular structures.

PubMed

Pagitz, M; Lamacchia, E; Hol, J M A M

2012-03-01

Shape changing structures will play an important role in future engineering designs since rigid structures are usually only optimal for a small range of service conditions. Hence, a concept for reliable and energy-efficient morphing structures that possess a large strength to self-weight ratio would be widely applicable. We propose a novel concept for morphing structures that is inspired by the nastic movement of plants. The idea is to connect prismatic cells with tailored pentagonal and/or hexagonal cross sections such that the resulting cellular structure morphs into given target shapes for certain cell pressures. An efficient algorithm for computing equilibrium shapes as well as cross-sectional geometries is presented. The potential of this novel concept is demonstrated by several examples that range from a flagellum like propulsion device to a morphing aircraft wing.

Reactor-Produced Medical Radionuclides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mirzadeh, Saed; Mausner, Leonard; Garland, Marc A

2011-01-01

The therapeutic use of radionuclides in nuclear medicine, oncology and cardiology is the most rapidly growing use of medical radionuclides. Since most therapeutic radionuclides are neutron rich and decay by beta emission, they are reactor-produced. This chapter deals mainly with production approaches with neutrons. Neutron interactions with matter, neutron transmission and activation rates, and neutron spectra of nuclear reactors are discussed in some detail. Further, a short discussion of the neutron-energy dependence of cross sections, reaction rates in thermal reactors, cross section measurements and flux monitoring, and general equations governing the reactor production of radionuclides are presented. Finally, the chaptermore » is concluded by providing a number of examples encompassing the various possible reaction routes for production of a number of medical radionuclides in a reactor.« less

Potential flow about arbitrary biplane wing sections

NASA Technical Reports Server (NTRS)

Garrick, I E

1937-01-01

A rigorous treatment is given of the problem of determining the two-dimensional potential flow around arbitrary biplane cellules. The analysis involves the use of elliptic functions and is sufficiently general to include the effects of such elements as the section shapes, the chord ratio, gap, stagger, and decalage, which elements may be specified arbitrarily. The flow problem is resolved by making use of the methods of conformal representation. Thus the solution of the problem of transforming conformally two arbitrary contours into two circles is expressed by a pair of simultaneous integral equations, for which a method of numerical solution is outlined. As an example of the numerical process, the pressure distribution over certain arrangements of the NACA 4412 airfoil in biplane combinations is presented and compared with the monoplane pressure distribution.

Shape optimization of road tunnel cross-section by simulated annealing

NASA Astrophysics Data System (ADS)

Sobótka, Maciej; Pachnicz, Michał

2016-06-01

The paper concerns shape optimization of a tunnel excavation cross-section. The study incorporates optimization procedure of the simulated annealing (SA). The form of a cost function derives from the energetic optimality condition, formulated in the authors' previous papers. The utilized algorithm takes advantage of the optimization procedure already published by the authors. Unlike other approaches presented in literature, the one introduced in this paper takes into consideration a practical requirement of preserving fixed clearance gauge. Itasca Flac software is utilized in numerical examples. The optimal excavation shapes are determined for five different in situ stress ratios. This factor significantly affects the optimal topology of excavation. The resulting shapes are elongated in the direction of a principal stress greater value. Moreover, the obtained optimal shapes have smooth contours circumscribing the gauge.

The role of computational chemistry in the science and measurements of the atmosphere

NASA Technical Reports Server (NTRS)

Phillips, D. H.

1978-01-01

The role of computational chemistry in determining the stability, photochemistry, spectroscopic parameters, and parameters for estimating reaction rates of atmospheric constituents is discussed. Examples dealing with the photolysis cross sections of HOCl and (1 Delta g) O2 and with the stability of gaseous NH4Cl and asymmetric ClO3 are presented. It is concluded that computational chemistry can play an important role in the study of atmospheric constituents, particularly reactive and short-lived species which are difficult to investigate experimentally.

Neutron physics with accelerators

NASA Astrophysics Data System (ADS)

Colonna, N.; Gunsing, F.; Käppeler, F.

2018-07-01

Neutron-induced nuclear reactions are of key importance for a variety of applications in basic and applied science. Apart from nuclear reactors, accelerator-based neutron sources play a major role in experimental studies, especially for the determination of reaction cross sections over a wide energy span from sub-thermal to GeV energies. After an overview of present and upcoming facilities, this article deals with state-of-the-art detectors and equipment, including the often difficult sample problem. These issues are illustrated at selected examples of measurements for nuclear astrophysics and reactor technology with emphasis on their intertwined relations.

Qualification of the T2 wind tunnel in cryogenic operation. A: Thermal field, preliminary study of a schematic model

NASA Technical Reports Server (NTRS)

Dor, J. B.; Mignosi, A.; Plazanet, M.

1984-01-01

The T2 wind tunnel is described. The process of generating a cyrogenic gust using the example of a test made at very low temperature is presented. Detailed results of tests on temperatures for flow in the settling chamber, the interior walls of the system, and the metal casing are given. The transverse temperature distribution in the settling chamber and working section, and of the thermal gradients in the walls, are given as a function of the temperature level of the test.

Analysis of Panel Data

NASA Astrophysics Data System (ADS)

Hsiao, Cheng

2003-02-01

Panel data models have become increasingly popular among applied researchers due to their heightened capacity for capturing the complexity of human behavior, as compared to cross-sectional or time series data models. This second edition represents a substantial revision of the highly successful first edition (1986). Recent advances in panel data research are presented in an accessible manner and are carefully integrated with the older material. The thorough discussion of theory and the judicious use of empirical examples make this book useful to graduate students and advanced researchers in economics, business, sociology and political science.

Effects of anisotropic electron-ion interactions in atomic photoelectron angular distributions

NASA Technical Reports Server (NTRS)

Dill, D.; Starace, A. F.; Manson, S. T.

1975-01-01

A summary of the angular momentum transfer formulation of the differential photoionization cross section is presented and photoionization amplitudes in LS coupling are considered. The application of the theoretical concepts and relations developed is illustrated with the aid of an example involving the calculation of the angular distribution of photoelectrons ionized from atomic sulfur according to a certain reaction. The investigation shows that anisotropic electron-ion interactions in atomic sulfur lead to measurable differences between photoelectron angular distribution asymmetry parameters corresponding to alternative ionic term levels.

26 CFR 801.7 - Examples.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 20 2010-04-01 2010-04-01 false Examples. 801.7 Section 801.7 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INTERNAL REVENUE PRACTICE BALANCED SYSTEM FOR MEASURING ORGANIZATIONAL AND EMPLOYEE PERFORMANCE WITHIN THE INTERNAL REVENUE SERVICE § 801.7...

Atomic spectroscopy with twisted photons: Separation of M 1 -E 2 mixed multipoles

NASA Astrophysics Data System (ADS)

Afanasev, Andrei; Carlson, Carl E.; Solyanik, Maria

2018-02-01

We analyze atomic photoexcitation into the discrete states by twisted photons, or photons carrying extra orbital angular momentum along their direction of propagation. From the angular momentum and parity considerations, we are able to relate twisted-photon photoexcitation amplitudes to their plane-wave analogs, independently of the details of the atomic wave functions. We analyze the photoabsorption cross sections of mixed-multipolarity E 2 -M 1 transitions in ionized atoms and found fundamental differences coming from the photon topology. Our theoretical analysis demonstrates that it is possible to extract the relative transition rates of different multipolar contributions by measuring the photoexcitation rate as a function of the atom's position (or impact parameter) with respect to the optical vortex center. The proposed technique for separation of multipoles can be implemented if the target's atom position is resolved with subwavelength accuracy; for example, with Paul traps. Numerical examples are presented for Boron-like highly charged ions.

Design of lightning protection for a full-authority digital engine control

NASA Technical Reports Server (NTRS)

Dargi, M.; Rupke, E.; Wiles, K.

1991-01-01

The steps and procedures are described which are necessary to achieve a successful lightning-protection design for a state-of-the-art Full-Authority Digital Engine Control (FADEC) system. The engine and control systems used as examples are fictional, but the design and verification methods are real. Topics discussed include: applicable airworthiness regulation, selection of equipment transient design and control levels for the engine/airframe and intra-engine segments of the system, the use of cable shields, terminal-protection devices and filter circuits in hardware protection design, and software approaches to minimize upset potential. Shield terminations, grounding, and bonding are also discussed, as are the important elements of certification and test plans, and the role of tests and analyses. Also included are examples of multiple-stroke and multiple-burst testing. A review of design pitfalls and challenges, and status of applicable test standards such as RTCA DO-160, Section 22, are presented.

A word processor optimized for preparing journal articles and student papers.

PubMed

Wolach, A H; McHale, M A

2001-11-01

A new Windows-based word processor for preparing journal articles and student papers is described. In addition to standard features found in word processors, the present word processor provides specific help in preparing manuscripts. Clicking on "Reference Help (APA Form)" in the "File" menu provides a detailed help system for entering the references in a journal article. Clicking on "Examples and Explanations of APA Form" provides a help system with examples of the various sections of a review article, journal article that has one experiment, or journal article that has two or more experiments. The word processor can automatically place the manuscript page header and page number at the top of each page using the form required by APA and Psychonomic Society journals. The "APA Form" submenu of the "Help" menu provides detailed information about how the word processor is optimized for preparing articles and papers.

Simulation of drive of mechanisms, working in specific conditions

NASA Astrophysics Data System (ADS)

Ivanovskaya, A. V.; Rybak, A. T.

2018-05-01

This paper presents a method for determining the dynamic loads on the lifting actuator device other than the conventional methods, for example, ship windlass. For such devices, the operation of their drives is typical under special conditions: different environments, the influence of hydrometeorological factors, a high level of vibration, variability of loading, etc. Hoisting devices working in such conditions are not considered in the standard; however, relevant studies concern permissible parameters of the drive devices of this kind. As an example, the article studied the work deck lifting devices - windlass. To construct a model, the windlass is represented by a rod of the variable cross-section. As a result, a mathematical model of the longitudinal oscillations of such rod is obtained. Analytic dependencies have also been obtained to determine the natural frequencies of the lowest forms of oscillations, which are necessary and are the basis for evaluating the parameters of operation of this type of the device.

Aerodynamic design of the contoured wind-tunnel liner for the NASA supercritical, laminar-flow-control, swept-wing experiment

NASA Technical Reports Server (NTRS)

Newman, P. A.; Anderson, E. C.; Peterson, J. B., Jr.

1984-01-01

An overview is presented of the entire procedure developed for the aerodynamic design of the contoured wind tunnel liner for the NASA supercritical, laminar flow control (LFC), swept wing experiment. This numerical design procedure is based upon the simple idea of streamlining and incorporates several transonic and boundary layer analysis codes. The liner, presently installed in the Langley 8 Foot Transonic Pressure Tunnel, is about 54 ft long and extends from within the existing contraction cone, through the test section, and into the diffuser. LFC model testing has begun and preliminary results indicate that the liner is performing as intended. The liner design results presented in this paper, however, are examples of the calculated requirements and the hardware implementation of them.

Microfluidic PMMA interfaces for rectangular glass capillaries

NASA Astrophysics Data System (ADS)

Evander, Mikael; Tenje, Maria

2014-02-01

We present the design and fabrication of a polymeric capillary fluidic interface fabricated by micro-milling. The design enables the use of glass capillaries with any kind of cross-section in complex microfluidic setups. We demonstrate two different designs of the interface; a double-inlet interface for hydrodynamic focusing and a capillary interface with integrated pneumatic valves. Both capillary interfaces are presented together with examples of practical applications. This communication shows the design optimization and presents details of the fabrication process. The capillary interface opens up for the use of complex microfluidic systems in single-use glass capillaries. They also enable simple fabrication of glass/polymer hybrid devices that can be beneficial in many research fields where a pure polymer chip negatively affects the device's performance, e.g. acoustofluidics.

25 CFR 309.14 - What are examples of beadwork, quillwork, and moose hair tufting that are Indian products?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of beadwork, quillwork, and moose hair tufting that are Indian products? 309.14 Section 309.14 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.14 What are examples of beadwork, quillwork, and moose hair tufting that are...

21 CFR 312.32 - IND safety reports.

Code of Federal Regulations, 2010 CFR

2010-04-01

... safety reports. (a) Definitions. The following definitions of terms apply to this section:- Associated... intervention to prevent one of the outcomes listed in this definition. Examples of such medical events include... example, under this definition, hepatic necrosis would be unexpected (by virtue of greater severity) if...

32 CFR 32.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... to vest title in the recipient without further obligation to the Federal Government. An example of..., including design and development of prototypes and processes. The term research also includes activities... used in those parts. For example, “suspension” is defined in this section to mean temporary withdrawal...

40 CFR 35.939 - Protests.

Code of Federal Regulations, 2011 CFR

2011-07-01

... complainant, the grantee's procurement action (for example, contract award) must be taken in accordance with...) of this section should be made as early as possible during the procurement process (for example... grantee proposes to award a formally advertised, competitively bid, fixed price contract to a party who...

Boolean Networks in Inference and Dynamic Modeling of Biological Systems at the Molecular and Physiological Level

NASA Astrophysics Data System (ADS)

Thakar, Juilee; Albert, Réka

The following sections are included: * Introduction * Boolean Network Concepts and History * Extensions of the Classical Boolean Framework * Boolean Inference Methods and Examples in Biology * Dynamic Boolean Models: Examples in Plant Biology, Developmental Biology and Immunology * Conclusions * References

26 CFR 1.482-0 - Outline of regulations under section 482.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Property or services. (4) Special circumstances. (i) Market share strategy. (ii) Different geographic markets. (A) In general. (B) Example. (C) Location savings. (D) Example. (iii) Transactions ordinarily not... of multiple year data. (C) Comparable effect over comparable period. (D) Applications of methods...

Storylines as an alternative method to communicate river research via a knowledge platform

NASA Astrophysics Data System (ADS)

Cortes Arevalo, Juliette; Verbrugge, Laura N. H.; den Haan, Robert Jan; Baart, Fedor; Hulscher, Suzanne J. M. H.; van der Voort, Mascha C.

2017-04-01

Sustainable river management relies on diverse and multi-faceted knowledge from fundamental and applied research. Communicating the context, added value and potential use of river research to actors working in multiple disciplines or organizations is challenging. RiverCare is a research programme studying the mid-term effects of innovative river interventions in the Netherlands. Effective communication between researchers and potential users of scientific information, such as water professionals, requires an interactive, two-way communication approach. As part of the communication strategy, we are designing a knowledge platform to provide access to, explain and gather feedback about the potential use of results from water professionals. The knowledge platform is a combination of online services including: a content management system in which storylines are the main component; a data repository to the underlying research data and; hyperlinks to existing online sites that present our results via short news articles. Storylines engage water professionals via experiences or stories of river management actors to explain research outputs instead of or in addition to more technical means such as scientific papers and reports. The use of storylines enables us to explain research outcomes in a way that is captivating and easily understood by a multi-disciplinary audience. To explore its usefulness as communication approach, we developed a storyline example for research about stakeholder perceptions of a re-landscaping intervention in the Waal river in the Netherlands. The storyline's layout consisted of a menu outline and three tabs: (1) storyline's content; (2) contact details; and (3) links to available resources or related publications. The storyline's content was divided in four sections including subsections to navigate. Each section had a heading statement or question to engage users: "Imagine this!"; "What matters? Places matter to people"; "Surveying people's perceptions"; and "How these insight help us?". Along the story, users can explore related links and available results presented in the form of interactive quotes and charts. The storyline example was discussed in a workshop with potential users to identify needs for improvement. Participants acknowledged its potential usefulness for water professionals abroad; applicability to other research topics; and options to provide contact details. Participants also appreciated the nice layout and interactive elements, such as interactive quotes and charts. However, more emphasis should be given on explaining why the research was done and how the results can be useful for the users. The added value of storylines and the navigation along the example was not always clear to water professionals and researchers and should be clarified. As presented in this study, the storyline example was a stand-alone component in a browser. To improve the user interaction, next storyline prototypes will be embedded into the knowledge platform to clarify its navigation and to link the specific example as part of the research outcomes of the RiverCare project. Future storyline prototypes will also include a feedback form to collect comments from water professionals and a glossary of terms to further clarify terms that were simplified in the storyline example.

Soil load above Hanford waste storage tanks (2 volumes)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pianka, E.W.

1995-01-25

This document is a compilation of work performed as part of the Dome Load Control Project in 1994. Section 2 contains the calculations of the weight of the soil over the tank dome for each of the 75-feet-diameter waste-storage tanks located at the Hanford Site. The chosen soil specific weight and soil depth measured at the apex of the dome crown are the same as those used in the primary analysis that qualified the design. Section 3 provides reference dimensions for each of the tank farm sites. The reference dimensions spatially orient the tanks and provide an outer diameter formore » each tank. Section 4 summarizes the available soil surface elevation data. It also provides examples of the calculations performed to establish the present soil elevation estimates. The survey data and other data sources from which the elevation data has been obtained are printed separately in Volume 2 of this Supporting Document. Section 5 contains tables that provide an overall summary of the present status of dome loads. Tables summarizing the load state corresponding to the soil depth and soil specific weight for the original qualification analysis, the gravity load requalification for soil depth and soil specific weight greater than the expected actual values, and a best estimate condition of soil depth and specific weight are presented for the Double-Shell Tanks. For the Single-Shell Tanks, only the original qualification analysis is available; thus, the tabulated results are for this case only. Section 6 provides a brief overview of past analysis and testing results that given an indication of the load capacity of the waste storage tanks that corresponds to a condition approaching ultimate failure of the tank. 31 refs.« less

26 CFR 1.825-3 - Examples.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

26 CFR 1.825-3 - Examples.

Code of Federal Regulations, 2014 CFR

2014-04-01

... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

26 CFR 1.825-3 - Examples.

Code of Federal Regulations, 2013 CFR

2013-04-01

... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

26 CFR 1.825-3 - Examples.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TAXES (CONTINUED) Mutual Insurance Companies (other Than Life and Certain Marine Insurance Companies and Other Than Fire Or Flood Insurance Companies Which Operate on Basis of Perpetual Policies Or Premium...: Example 1. For the taxable year 1967, F, a mutual insurance company subject to the tax imposed by section...

26 CFR 1.1502-13 - Intercompany transactions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... provide rules to clearly reflect the taxable income (and tax liability) of the group as a whole by... with a member's otherwise applicable methods of accounting, the timing rules of this section control.... Successor group. Example 6. Liquidation—80% distributee. Example 7. Liquidation—no 80% distributee. (b...

26 CFR 1.1502-13 - Intercompany transactions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... provide rules to clearly reflect the taxable income (and tax liability) of the group as a whole by... with a member's otherwise applicable methods of accounting, the timing rules of this section control.... Successor group. Example 6. Liquidation—80% distributee. Example 7. Liquidation—no 80% distributee. (b...

32 CFR 32.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... to vest title in the recipient without further obligation to the Federal Government. An example of... used in those parts. For example, “suspension” is defined in this section to mean temporary withdrawal...), for property acquired under an award to conduct basic or applied research by a non-profit institution...

32 CFR 32.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to vest title in the recipient without further obligation to the Federal Government. An example of... used in those parts. For example, “suspension” is defined in this section to mean temporary withdrawal...), for property acquired under an award to conduct basic or applied research by a non-profit institution...

32 CFR 32.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... to vest title in the recipient without further obligation to the Federal Government. An example of... used in those parts. For example, “suspension” is defined in this section to mean temporary withdrawal...), for property acquired under an award to conduct basic or applied research by a non-profit institution...

32 CFR 32.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... to vest title in the recipient without further obligation to the Federal Government. An example of... used in those parts. For example, “suspension” is defined in this section to mean temporary withdrawal...), for property acquired under an award to conduct basic or applied research by a non-profit institution...

26 CFR 1.1502-13 - Intercompany transactions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... provide rules to clearly reflect the taxable income (and tax liability) of the group as a whole by... with a member's otherwise applicable methods of accounting, the timing rules of this section control.... Successor group. Example 6. Liquidation—80% distributee. Example 7. Liquidation—no 80% distributee. (b...

Flight Measurement of Wall-Pressure Fluctuations and Boundary-Layer Turbulence

NASA Technical Reports Server (NTRS)

Mull, Harold R.; Algranti, Joseph S.

1960-01-01

The results are presented for a flight test program using a fighter type jet aircraft flying at pressure altitudes of 10,000, 20,000, and 30,000 feet at Mach numbers from 0.3 to 0.8. Specially designed apparatus was used to measure and record the output of microphones and hot-wire anemometers mounted on the forward-fuselage section and wing of the airplane. Mean-velocity profiles in the boundary layers were obtained from total-pressure measurements. The ratio of the root-mean-square fluctuating wall pressure to the free-stream dynamic pressure is presented as a function of Reynolds number and Mach number. The longitudinal component of the turbulent-velocity fluctuations was measured, and the turbulence-intensity profiles are presented for the wing and forward-fuselage section. In general, the results are in agreement with wind-tunnel measurements which have been-reported in the literature. For example, the variation the square root of p(sup 2)/q times the square root of p(sup 2) is the root mean square of the wall-pressure fluctuation, and q is the free-stream dynamic pressure) with Reynolds number was found to be essentially constant for the forward-fuselage-section boundary layer, while variations at the wing station were probably unduly affected by the microphone diameter (5/8 in.), which was large compared with the boundary-layer thickness.

Designing tools for oil exploration using nuclear modeling

NASA Astrophysics Data System (ADS)

Mauborgne, Marie-Laure; Allioli, Françoise; Manclossi, Mauro; Nicoletti, Luisa; Stoller, Chris; Evans, Mike

2017-09-01

When designing nuclear tools for oil exploration, one of the first steps is typically nuclear modeling for concept evaluation and initial characterization. Having an accurate model, including the availability of accurate cross sections, is essential to reduce or avoid time consuming and costly design iterations. During tool response characterization, modeling is benchmarked with experimental data and then used to complement and to expand the database to make it more detailed and inclusive of more measurement environments which are difficult or impossible to reproduce in the laboratory. We present comparisons of our modeling results obtained using the ENDF/B-VI and ENDF/B-VII cross section data bases, focusing on the response to a few elements found in the tool, borehole and subsurface formation. For neutron-induced inelastic and capture gamma ray spectroscopy, major obstacles may be caused by missing or inaccurate cross sections for essential materials. We show examples of the benchmarking of modeling results against experimental data obtained during tool characterization and discuss observed discrepancies.

Users guide for the hydroacoustic coverage assessment model (HydroCAM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, T., LLNL

1997-12-01

A model for predicting the detection and localization performance of hydroacoustic monitoring networks has been developed. The model accounts for major factors affecting global-scale acoustic propagation in the ocean. including horizontal refraction, travel time variability due to spatial and temporal fluctuations in the ocean, and detailed characteristics of the source. Graphical user interfaces are provided to setup the models and visualize the results. The model produces maps of network detection coverage and localization area of uncertainty, as well as intermediate results such as predicted path amplitudes, travel time and travel time variance. This Users Guide for the model is organizedmore » into three sections. First a summary of functionality available in the model is presented, including example output products. The second section provides detailed descriptions of each of models contained in the system. The last section describes how to run the model, including a summary of each data input form in the user interface.« less

Open-source Framework for Storing and Manipulation of Plasma Chemical Reaction Data

NASA Astrophysics Data System (ADS)

Jenkins, T. G.; Averkin, S. N.; Cary, J. R.; Kruger, S. E.

2017-10-01

We present a new open-source framework for storage and manipulation of plasma chemical reaction data that has emerged from our in-house project MUNCHKIN. This framework consists of python scripts and C + + programs. It stores data in an SQL data base for fast retrieval and manipulation. For example, it is possible to fit cross-section data into most widely used analytical expressions, calculate reaction rates for Maxwellian distribution functions of colliding particles, and fit them into different analytical expressions. Another important feature of this framework is the ability to calculate transport properties based on the cross-section data and supplied distribution functions. In addition, this framework allows the export of chemical reaction descriptions in LaTeX format for ease of inclusion in scientific papers. With the help of this framework it is possible to generate corresponding VSim (Particle-In-Cell simulation code) and USim (unstructured multi-fluid code) input blocks with appropriate cross-sections.

Vibration and stability of cracked hollow-sectional beams

NASA Astrophysics Data System (ADS)

Zheng, D. Y.; Fan, S. C.

2003-10-01

This paper presents simple tools for the vibration and stability analysis of cracked hollow-sectional beams. It comprises two parts. In the first, the influences of sectional cracks are expressed in terms of flexibility induced. Each crack is assigned with a local flexibility coefficient, which is derived by virtue of theories of fracture mechanics. The flexibility coefficient is a function of the depth of a crack. The general formulae are derived and expressed in integral form. It is then transformed to explicit form through 128-point Gauss quadrature. According to the depth of the crack, the formulae are derived under two scenarios. The first is for shallow cracks, of which the penetration depth is contained within the top solid-sectional region. The second is for deeper penetration, in which the crack goes into the middle hollow-sectional region. The explicit formulae are best-fitted equations generated by the least-squares method. The best-fitted curves are presented. From the curves, the flexibility coefficients can be read out easily, while the explicit expressions facilitate easy implementation in computer analysis. In the second part, the flexibility coefficients are employed in the vibration and stability analysis of hollow-sectional beams. The cracked beam is treated as an assembly of sub-segments linked up by rotational springs. Division of segments are made coincident with the location of cracks or any abrupt change of sectional property. The crack's flexibility coefficient then serves as that of the rotational spring. Application of the Hamilton's principle leads to the governing equations, which are subsequently solved through employment of a simple technique. It is a kind of modified Fourier series, which is able to represent any order of continuity of the vibration/buckling modes. Illustrative numerical examples are included.

To Reach Multicultural Users in Libraries--Some Reflections and Examples from Sweden.

ERIC Educational Resources Information Center

Ekman, Maud

This paper describes library services to multicultural users in Sweden. The first section addresses library buildings and staff, stressing the importance of a welcoming environment. Library materials and technique are discussed in the second section, including media in other languages and access to the Internet. The third section considers…

26 CFR 1.457-10 - Miscellaneous provisions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gross income by reason of the transfer, if the conditions in paragraph (b)(8)(ii) of this section are... to which section 415 does not apply by reason of section 415(k)(3). (iii) Example. The provisions of... at $100,000 under the plan. Pursuant to the divorce, a court issues a qualified domestic relations...

26 CFR 1.865-1 - Loss with respect to personal property other than stock.

Code of Federal Regulations, 2014 CFR

2014-04-01

... TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulations Applicable to Taxable... marked-to-market (such as under section 475) and subject to the rules of this section. Thus, for example... not amortize bond premium to the full extent permitted by section 171 and the regulations thereunder...

26 CFR 1.865-1 - Loss with respect to personal property other than stock.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulations Applicable to Taxable... marked-to-market (such as under section 475) and subject to the rules of this section. Thus, for example... not amortize bond premium to the full extent permitted by section 171 and the regulations thereunder...

26 CFR 1.865-1 - Loss with respect to personal property other than stock.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Regulations Applicable to Taxable... marked-to-market (such as under section 475) and subject to the rules of this section. Thus, for example... not amortize bond premium to the full extent permitted by section 171 and the regulations thereunder...

26 CFR 1.72-15 - Applicability of section 72 to accident or health plans.

Code of Federal Regulations, 2010 CFR

2010-04-01

... retirement and the payment of an earlier pension in the event of permanent disability. This section will also... presumed that the disability pension is provided by employer contributions, unless the plan expressly... or inclusion of accident or health benefits under sections 104 and 105. For example, the investment...

26 CFR 1.801-6 - Adjustments in reserves for policy loans.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Life Insurance Companies § 1.801-6 Adjustments in... whether or not an insurance company is a life insurance company (as defined in section 801(a) and... example: Example. The books of T, an insurance company, selling only life insurance and cancellable...

26 CFR 1.801-6 - Adjustments in reserves for policy loans.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Life Insurance Companies § 1.801-6 Adjustments in... whether or not an insurance company is a life insurance company (as defined in section 801(a) and... example: Example. The books of T, an insurance company, selling only life insurance and cancellable...

26 CFR 1.801-6 - Adjustments in reserves for policy loans.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Life Insurance Companies § 1.801-6 Adjustments in... whether or not an insurance company is a life insurance company (as defined in section 801(a) and... example: Example. The books of T, an insurance company, selling only life insurance and cancellable...

26 CFR 1.801-6 - Adjustments in reserves for policy loans.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Life Insurance Companies § 1.801-6 Adjustments in... whether or not an insurance company is a life insurance company (as defined in section 801(a) and... example: Example. The books of T, an insurance company, selling only life insurance and cancellable...

26 CFR 1.337(d)-1 - Transitional loss limitation rule.

Code of Federal Regulations, 2010 CFR

2010-04-01

... value over basis, determined immediately before the transitional subsidiary became a subsidiary, with...) Disposition means any event in which gain or loss is recognized, in whole or in part. (v) Value means fair market value. (5) Examples. For purposes of the examples in this section, unless otherwise stated, the...

26 CFR 1.401(l)-0 - Table of contents.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... (5) Prorated integration level for short plan year. (e) Examples. § 1.401(l)-3Permitted disparity for... forms. (D) Post-retirement cost-of-living adjustments. (1) In general. (2) Requirements. (E) Section 417(e) exception. (5) Examples. (c) Uniform disparity. (1) In general. (2) Deemed uniformity. (i) In...

5 CFR 2641.301 - Statutory exceptions and waivers.

Code of Federal Regulations, 2011 CFR

2011-01-01

....301 Section 2641.301 Administrative Personnel OFFICE OF GOVERNMENT ETHICS GOVERNMENT ETHICS POST... employee is called as a witness by the United States. Example 1 to paragraph (a): An employee of the... behalf of the United States. Example 2 to paragraph (a): A Federal Transit Administration (FTA) employee...

26 CFR 1.401(l)-0 - Table of contents.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... (5) Prorated integration level for short plan year. (e) Examples. § 1.401(l)-3Permitted disparity for... forms. (D) Post-retirement cost-of-living adjustments. (1) In general. (2) Requirements. (E) Section 417(e) exception. (5) Examples. (c) Uniform disparity. (1) In general. (2) Deemed uniformity. (i) In...

26 CFR 1.401(l)-0 - Table of contents.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... (5) Prorated integration level for short plan year. (e) Examples. § 1.401(l)-3Permitted disparity for... forms. (D) Post-retirement cost-of-living adjustments. (1) In general. (2) Requirements. (E) Section 417(e) exception. (5) Examples. (c) Uniform disparity. (1) In general. (2) Deemed uniformity. (i) In...

10 CFR 1706.9 - Examples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

10 CFR 1706.9 - Examples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

10 CFR 1706.9 - Examples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

10 CFR 1706.9 - Examples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Examples. 1706.9 Section 1706.9 Energy DEFENSE NUCLEAR... review of a safety aspect of a particular defense nuclear facility proposes to use the services of an expert who also serves on an oversight committee for a contractor of other defense nuclear facilities. (2...

12 CFR 24.6 - Examples of qualifying public welfare investments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Examples of qualifying public welfare investments. 24.6 Section 24.6 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY COMMUNITY AND ECONOMIC DEVELOPMENT ENTITIES, COMMUNITY DEVELOPMENT PROJECTS, AND OTHER PUBLIC WELFARE...

48 CFR 52.101 - Using part 52.

Code of Federal Regulations, 2014 CFR

2014-10-01

... number assigned within each section of subpart 52.2. The following example illustrates the makeup of the... Register and is codified in Title 48, Code of Federal Regulations (48 CFR), the number shall be preceded by... acquisition regulation that contains its full text. If, for example, an agency acquisition regulation contains...

48 CFR 52.101 - Using part 52.

Code of Federal Regulations, 2012 CFR

2012-10-01

... number assigned within each section of subpart 52.2. The following example illustrates the makeup of the... Register and is codified in Title 48, Code of Federal Regulations (48 CFR), the number shall be preceded by... acquisition regulation that contains its full text. If, for example, an agency acquisition regulation contains...

15 CFR 701.4 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Subject to Offset; (iii) Names/Titles of Signatories to the Offset Agreement; (iv) Value of Export Sale.../naics.html). Paragraphs (c)(1)(iii)(A) through (c)(1)(iii)(E) of this section provide examples that illustrate how to select the appropriate NAICS code(s). (A) Example 1. Company A enters into an offset...

48 CFR 52.101 - Using part 52.

Code of Federal Regulations, 2011 CFR

2011-10-01

... number assigned within each section of subpart 52.2. The following example illustrates the makeup of the... Register and is codified in Title 48, Code of Federal Regulations (48 CFR), the number shall be preceded by... acquisition regulation that contains its full text. If, for example, an agency acquisition regulation contains...

48 CFR 52.101 - Using part 52.

Code of Federal Regulations, 2010 CFR

2010-10-01

... number assigned within each section of subpart 52.2. The following example illustrates the makeup of the... Register and is codified in Title 48, Code of Federal Regulations (48 CFR), the number shall be preceded by... acquisition regulation that contains its full text. If, for example, an agency acquisition regulation contains...

48 CFR 52.101 - Using part 52.

Code of Federal Regulations, 2013 CFR

2013-10-01

... number assigned within each section of subpart 52.2. The following example illustrates the makeup of the... Register and is codified in Title 48, Code of Federal Regulations (48 CFR), the number shall be preceded by... acquisition regulation that contains its full text. If, for example, an agency acquisition regulation contains...

26 CFR 25.7520-3 - Limitation on the application of section 7520.

Code of Federal Regulations, 2013 CFR

2013-04-01

... are illustrated by the following example: Example. Terminal illness. The donor transfers property... have an incurable illness or other deteriorating physical condition is considered terminally ill if.... The donor is age 75 but has been diagnosed with an incurable illness and has at least a 50 percent...

26 CFR 25.7520-3 - Limitation on the application of section 7520.

Code of Federal Regulations, 2012 CFR

2012-04-01

... are illustrated by the following example: Example. Terminal illness. The donor transfers property... have an incurable illness or other deteriorating physical condition is considered terminally ill if.... The donor is age 75 but has been diagnosed with an incurable illness and has at least a 50 percent...

26 CFR 25.7520-3 - Limitation on the application of section 7520.

Code of Federal Regulations, 2014 CFR

2014-04-01

... are illustrated by the following example: Example. Terminal illness. The donor transfers property... have an incurable illness or other deteriorating physical condition is considered terminally ill if.... The donor is age 75 but has been diagnosed with an incurable illness and has at least a 50 percent...

26 CFR 1.1502-90A - Table of contents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... general. (2) Examples. (e) Filing the election to apportion. (1) Form of the election to apportion. (2...) Principal purpose of avoiding a limitation. (5) Special rules. (6) Examples. (e) Pre-change consolidated... ownership change under this section. (e) Information statements. (1) Common parent of a loss group. (2...

16 CFR 239.4 - “Lifetime” and similar representations.

Code of Federal Regulations, 2010 CFR

2010-01-01

....4 Section 239.4 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES... advertisement uses “lifetime,” “life,” or similar representations to describe the duration of a warranty or... understood by prospective purchasers, the life to which the representation refers. Examples: These examples...

26 CFR 1.6664-4 - Reasonable cause and good faith exception to section 6662 penalties.

Code of Federal Regulations, 2011 CFR

2011-04-01

... claimed. Example 3. E, an individual, worked for Company X doing odd jobs and filling in for other... legal justification. (3) Minimum requirements not dispositive. Satisfaction of the minimum requirements... example, depending on the circumstances, satisfaction of the minimum requirements may not be dispositive...

Introducing student inquiry in large introductory genetics classes.

PubMed Central

Pukkila, Patricia J

2004-01-01

An appreciation of genetic principles depends upon understanding the individual curiosity that sparked particular investigations, the creativity involved in imagining alternative outcomes and designing experiments to eliminate these outcomes, and the clarity of thought necessary to convince one's scientific peers of the validity of the conclusions. At large research universities, students usually begin their study of genetics in large lecture classes. It is widely assumed that the lecture format, coupled with the pressures to be certain that students become familiar with the principal conclusions of genetics investigations, constrains most if not all departures from the formats textbooks used to explain these conclusions. Here I present several examples of mechanisms to introduce meaningful student inquiry in an introductory genetics course and to evaluate student creative effort. Most of the examples involve altered student preparation prior to class and additional in-class activities, while a few depend upon a smaller recitation section, which accompanies the course from which the examples have been drawn. I conclude that large introductory classes are suitable venues to teach students how to identify scientific claims, determine the evidence that is essential to eliminate alternative conclusions, and convince their peers of the validity of their arguments. PMID:15020401

Concentration data and dimensionality in groundwater models: evaluation using inverse modelling

USGS Publications Warehouse

Barlebo, H.C.; Hill, M.C.; Rosbjerg, D.; Jensen, K.H.

1998-01-01

A three-dimensional inverse groundwater flow and transport model that fits hydraulic-head and concentration data simultaneously using nonlinear regression is presented and applied to a layered sand and silt groundwater system beneath the Grindsted Landfill in Denmark. The aquifer is composed of rather homogeneous hydrogeologic layers. Two issues common to groundwater flow and transport modelling are investigated: 1) The accuracy of simulated concentrations in the case of calibration with head data alone; and 2) The advantages and disadvantages of using a two-dimensional cross-sectional model instead of a three-dimensional model to simulate contaminant transport when the source is at the land surface. Results show that using only hydraulic heads in the nonlinear regression produces a simulated plume that is profoundly different from what is obtained in a calibration using both hydraulic-head and concentration data. The present study provides a well-documented example of the differences that can occur. Representing the system as a two-dimensional cross-section obviously omits some of the system dynamics. It was, however, possible to obtain a simulated plume cross-section that matched the actual plume cross-section well. The two-dimensional model execution times were about a seventh of those for the three-dimensional model, but some difficulties were encountered in representing the spatially variable source concentrations and less precise simulated concentrations were calculated by the two-dimensional model compared to the three-dimensional model. Summed up, the present study indicates that three dimensional modelling using both hydraulic heads and concentrations in the calibration should be preferred in the considered type of transport studies.

Optimal Design of Sheet Pile Wall Embedded in Clay

NASA Astrophysics Data System (ADS)

Das, Manas Ranjan; Das, Sarat Kumar

2015-09-01

Sheet pile wall is a type of flexible earth retaining structure used in waterfront offshore structures, river protection work and temporary supports in foundations and excavations. Economy is an essential part of a good engineering design and needs to be considered explicitly in obtaining an optimum section. By considering appropriate embedment depth and sheet pile section it may be possible to achieve better economy. This paper describes optimum design of both cantilever and anchored sheet pile wall penetrating clay using a simple optimization tool Microsoft Excel ® Solver. The detail methodology and its application with examples are presented for cantilever and anchored sheet piles. The effects of soil properties, depth of penetration and variation of ground water table on the optimum design are also discussed. Such a study will help professional while designing the sheet pile wall penetrating clay.

48 CFR 749.100 - Scope of subpart.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section 749.100 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACT... Agencies Appropriation Act, 1963, and subsequent appropriation Acts, have imposed the following requirement.... See, for example, section 110 of the Foreign Assistance and Related Agencies Appropriation Act, 1965. ...

48 CFR 749.100 - Scope of subpart.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 749.100 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACT... Agencies Appropriation Act, 1963, and subsequent appropriation Acts, have imposed the following requirement.... See, for example, section 110 of the Foreign Assistance and Related Agencies Appropriation Act, 1965. ...

48 CFR 749.100 - Scope of subpart.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 749.100 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACT... Agencies Appropriation Act, 1963, and subsequent appropriation Acts, have imposed the following requirement.... See, for example, section 110 of the Foreign Assistance and Related Agencies Appropriation Act, 1965. ...

48 CFR 749.100 - Scope of subpart.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 749.100 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACT... Agencies Appropriation Act, 1963, and subsequent appropriation Acts, have imposed the following requirement.... See, for example, section 110 of the Foreign Assistance and Related Agencies Appropriation Act, 1965. ...

Arbitrarily Curved and Twisted Space Beams. Ph.D. Thesis - Va. Polytech. Inst. and State Univ.; [Elastic Deformation, Stress Analysis

NASA Technical Reports Server (NTRS)

Hunter, W. F.

1974-01-01

A derivation of the equations which govern the deformation of an arbitrarily curved and twisted space beam is presented. These equations differ from those of the classical theory in that (1) extensional effects are included; (2) the strain-displacement relations are derived; and (3) the expressions for the stress resultants are developed from the strain displacement relations. It is shown that the torsional stress resultant obtained by the classical approach is basically incorrect except when the cross-section is circular. The governing equations are given in the form of first-order differential equations. A numerical algorithm is given for obtaining the natural vibration characteristics and example problems are presented.

Recent advances in nuclear fission theory: pre- and post-scission physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Talou, Patrick; Kawano, Toshihiko; Bouland, Olivier

2010-01-01

Recent advances in the modeling of the nuclear fission process for data evaluation purposes are reviewed. In particular, it is stressed that a more comprehensive approach to fission data is needed if predictive capability is to be achieved. The link between pre- and post-scission data is clarified, and a path forward to evaluate those data in a consistent and comprehensive manner is presented. Two examples are given: (i) the modeling of fission cross-sections in the R-matrix formalism, for which results for Pu isotopes from 239 to 242 are presented; (ii) the modeling of prompt fission neutrons in the Monte Carlomore » Hauser-Feshbach framework. Results for neutron-induced fission on {sup 235}U are discussed.« less

Solitary fibrous tumour of the cheek: An unusual presentation of a rare soft tissue tumour

PubMed Central

Jones, JL; Jones, AV; Drage, NA; Bhatia, S; Hourihan, MD

2014-01-01

This case report discusses the unusual presentation and ultrasound features of a solitary fibrous tumour of the face. Solitary fibrous tumour is an uncommon form of soft tissue tumour which, although seen predominantly within the lung pleura, can occur throughout the body in sites such as the peritoneum, mediastinum and head and neck. Ultrasound is an excellent imaging modality in the assessment of soft tissue masses in the head and neck. The ultrasound features demonstrated by this example of solitary fibrous tumour are reviewed. This report also highlights that ultrasound alone is ultimately limited in reaching a definitive diagnosis. The roles of other investigations such as ultrasound-guided biopsy and cross-sectional imaging are discussed. PMID:27433225

Nuclear data correlation between different isotopes via integral information

NASA Astrophysics Data System (ADS)

Rochman, Dimitri A.; Bauge, Eric; Vasiliev, Alexander; Ferroukhi, Hakim; Perret, Gregory

2018-05-01

This paper presents a Bayesian approach based on integral experiments to create correlations between different isotopes which do not appear with differential data. A simple Bayesian set of equations is presented with random nuclear data, similarly to the usual methods applied with differential data. As a consequence, updated nuclear data (cross sections, ν‾, fission neutron spectra and covariance matrices) are obtained, leading to better integral results. An example for 235U and 238U is proposed taking into account the Bigten criticality benchmark.

Unified continuum damage model for matrix cracking in composite rotor blades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollayi, Hemaraju; Harursampath, Dineshkumar

This paper deals with modeling of the first damage mode, matrix micro-cracking, in helicopter rotor/wind turbine blades and how this effects the overall cross-sectional stiffness. The helicopter/wind turbine rotor system operates in a highly dynamic and unsteady environment leading to severe vibratory loads present in the system. Repeated exposure to this loading condition can induce damage in the composite rotor blades. These rotor/turbine blades are generally made of fiber-reinforced laminated composites and exhibit various competing modes of damage such as matrix micro-cracking, delamination, and fiber breakage. There is a need to study the behavior of the composite rotor system undermore » various key damage modes in composite materials for developing Structural Health Monitoring (SHM) system. Each blade is modeled as a beam based on geometrically non-linear 3-D elasticity theory. Each blade thus splits into 2-D analyzes of cross-sections and non-linear 1-D analyzes along the beam reference curves. Two different tools are used here for complete 3-D analysis: VABS for 2-D cross-sectional analysis and GEBT for 1-D beam analysis. The physically-based failure models for matrix in compression and tension loading are used in the present work. Matrix cracking is detected using two failure criterion: Matrix Failure in Compression and Matrix Failure in Tension which are based on the recovered field. A strain variable is set which drives the damage variable for matrix cracking and this damage variable is used to estimate the reduced cross-sectional stiffness. The matrix micro-cracking is performed in two different approaches: (i) Element-wise, and (ii) Node-wise. The procedure presented in this paper is implemented in VABS as matrix micro-cracking modeling module. Three examples are presented to investigate the matrix failure model which illustrate the effect of matrix cracking on cross-sectional stiffness by varying the applied cyclic load.« less

Simultaneity, relativity and conventionality

NASA Astrophysics Data System (ADS)

Janis, Allen I.

2008-01-01

The view of simultaneity presented by Max Jammer is almost breathtaking, encompassing, as the book's subtitle suggests, the period from antiquity to the 21st century. Many interesting things are to be found along the way. For example, what Jammer (p. 49) says "may well be regarded as probably the earliest recorded example of an operational definition of distant simultaneity" is due to St. Augustine (in his Confessions, written in 397 A.D.; for a modern translation, see Augustine, 2006). He was arguing against astrology by presenting the story of two women, one rich and one poor, who gave birth simultaneously. Although the two children thus had precisely the same horoscopes, their lives followed quite different courses. And how was it determined that the births were simultaneous? A messenger went from each birth site to the other, leaving the instant the child was born (and, presumably, traveling with equal speeds). Since the messengers met at the midpoint between the locations of the two births, the births must have been simultaneous. This is, of course, quite analogous to Albert Einstein's definition of simultaneity (given more than 1500 years later), which will be discussed in Section 2.1.

Dynamic Shape Reconstruction of Three-Dimensional Frame Structures Using the Inverse Finite Element Method

NASA Technical Reports Server (NTRS)

Gherlone, Marco; Cerracchio, Priscilla; Mattone, Massimiliano; Di Sciuva, Marco; Tessler, Alexander

2011-01-01

A robust and efficient computational method for reconstructing the three-dimensional displacement field of truss, beam, and frame structures, using measured surface-strain data, is presented. Known as shape sensing , this inverse problem has important implications for real-time actuation and control of smart structures, and for monitoring of structural integrity. The present formulation, based on the inverse Finite Element Method (iFEM), uses a least-squares variational principle involving strain measures of Timoshenko theory for stretching, torsion, bending, and transverse shear. Two inverse-frame finite elements are derived using interdependent interpolations whose interior degrees-of-freedom are condensed out at the element level. In addition, relationships between the order of kinematic-element interpolations and the number of required strain gauges are established. As an example problem, a thin-walled, circular cross-section cantilevered beam subjected to harmonic excitations in the presence of structural damping is modeled using iFEM; where, to simulate strain-gauge values and to provide reference displacements, a high-fidelity MSC/NASTRAN shell finite element model is used. Examples of low and high-frequency dynamic motion are analyzed and the solution accuracy examined with respect to various levels of discretization and the number of strain gauges.

1 CFR 8.9 - Form of citation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Form of citation. 8.9 Section 8.9 General... section, and the short form “CFR” may be used for “Code of Federal Regulations.” For example, “1 CFR 10.2” refers to title 1, Code of Federal Regulations, part 10, section 2. ...

1 CFR 8.9 - Form of citation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Form of citation. 8.9 Section 8.9 General... section, and the short form “CFR” may be used for “Code of Federal Regulations.” For example, “1 CFR 10.2” refers to title 1, Code of Federal Regulations, part 10, section 2. ...

26 CFR 1.1296-1 - Mark to market election for marketable stock.

Code of Federal Regulations, 2010 CFR

2010-04-01

... stock of the corporation that the person owns directly, or is treated as owning under paragraph (e) of... paragraph (e) of this section, the basis adjustments under paragraph (d)(1) of this section shall apply to... paragraph (e) of this section through which the United States person holds the PFIC stock. (ii) Example. The...

1 CFR 8.9 - Form of citation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Form of citation. 8.9 Section 8.9 General... section, and the short form “CFR” may be used for “Code of Federal Regulations.” For example, “1 CFR 10.2” refers to title 1, Code of Federal Regulations, part 10, section 2. ...

1 CFR 8.9 - Form of citation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Form of citation. 8.9 Section 8.9 General... section, and the short form “CFR” may be used for “Code of Federal Regulations.” For example, “1 CFR 10.2” refers to title 1, Code of Federal Regulations, part 10, section 2. ...

1 CFR 8.9 - Form of citation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Form of citation. 8.9 Section 8.9 General... section, and the short form “CFR” may be used for “Code of Federal Regulations.” For example, “1 CFR 10.2” refers to title 1, Code of Federal Regulations, part 10, section 2. ...

Guidelines for the design of subsurface drainage systems for highway structural sections

DOT National Transportation Integrated Search

1972-06-01

Design criteria and a design method for pavement subsurface drainage systems include inflow-outflow method of analysis, open graded drainage layers, collector drains, pipe outlets and markers. Design examples are given for embankment sections, cut se...

Teaching for Thinking.

ERIC Educational Resources Information Center

Keefe, James W., Ed.; Walberg, Herbert J., Ed.

This volume represents a variety of current efforts to incorporate thought-provoking methods into teaching. There are three sections. "Curriculum Developments" defines key curricular terms and offers a framework and general examples of teaching tactics. In this section, Barbara Presseisen distinguishes thinking from other cognitive…

Computational Modelling of Materials for Wind Turbine Blades: Selected DTU Wind Energy Activities.

PubMed

Mikkelsen, Lars Pilgaard; Mishnaevsky, Leon

2017-11-08

Computational and analytical studies of degradation of wind turbine blade materials at the macro-, micro-, and nanoscale carried out by the modelling team of the Section Composites and Materials Mechanics, Department of Wind Energy, DTU, are reviewed. Examples of the analysis of the microstructural effects on the strength and fatigue life of composites are shown. Computational studies of degradation mechanisms of wind blade composites under tensile and compressive loading are presented. The effect of hybrid and nanoengineered structures on the performance of the composite was studied in computational experiments as well.

A predictor-corrector scheme for vortex identification

NASA Technical Reports Server (NTRS)

Singer, Bart A.; Banks, David C.

1994-01-01

A new algorithm for identifying and characterizing vortices in complex flows is presented. The scheme uses both the vorticity and pressure fields. A skeleton line along the center of a vortex is produced by a two-step predictor-corrector scheme. The technique uses the vector field to move in the direction of the skeleton line and the scalar field to correct the location in the plane perpendicular to the skeleton line. A general vortex cross section can be concisely defined with five parameters at each point along the skeleton line. The details of the method and examples of its use are discussed.

Optimal illusion and invisibility of multilayered anisotropic cylinders and spheres.

PubMed

Zhang, Lin; Shi, Yan; Liang, Chang-Hong

2016-10-03

In this paper, full-wave electromagnetic scattering theory is employed to investigate illusion and invisibility of inhomogeneous anisotropic cylinders and spheres. With the use of a shell designed according to Mie series theory for multiple piecewise anisotropic layers, radar cross section (RCS) of the coated inhomogeneous anisotropic object can be dramatically reduced or disguised as another object in the long-wavelength limit. With the suitable adjustment of the anisotropy parameters of the shell, optimal illusion and invisibility characteristics of the coated inhomogeneous anisotropic object can be achieved. Details of theoretical analysis and numerical examples are presented to validate the proposed methodology.

A new method for detection of distant supernova neutrino bursts

NASA Astrophysics Data System (ADS)

Cline, D.; Fenyves, E.; Foshe, T.; Fuller, G.; Meyer, B.; Wilson, J.

1990-03-01

The feasibility of astrophysical neutrino detectors is studied, which is based on the detection of neutrons produced in neutrino-nucleus inelastic scattering events. Collective nuclear effects greatly enhancing the relevant interaction cross sections over those of single particle interactions are discussed. These effects can help to reduce the mass required for neutrino detectors. An example of a simple detector based on CaCO3 neutrino targets and BF3 neutron counters is presented. Neutron background limitations are discussed and the possibility of forming a coincidence between neutrino detectors and future gravity wave detectors is also considered.

Multigrid techniques for unstructured meshes

NASA Technical Reports Server (NTRS)

Mavriplis, D. J.

1995-01-01

An overview of current multigrid techniques for unstructured meshes is given. The basic principles of the multigrid approach are first outlined. Application of these principles to unstructured mesh problems is then described, illustrating various different approaches, and giving examples of practical applications. Advanced multigrid topics, such as the use of algebraic multigrid methods, and the combination of multigrid techniques with adaptive meshing strategies are dealt with in subsequent sections. These represent current areas of research, and the unresolved issues are discussed. The presentation is organized in an educational manner, for readers familiar with computational fluid dynamics, wishing to learn more about current unstructured mesh techniques.

Ultrasound biomicroscopy. High-frequency ultrasound imaging of the eye at microscopic resolution.

PubMed

Pavlin, C J; Foster, F S

1998-11-01

UBM presents us with a new method of imaging the anterior segment of the eye at high resolution. Its strengths lie in its ability to produce cross-sections of the living eye at microscopic resolution without violating the integrity of the globe. UBM, although lacking the resolution of optical microscopy, gives us images in living eyes without affecting the internal relationships of the structures imaged. There are many other applications of this new imaging method. Examples of other uses include imaging adnexal pathology, assessing corneal changes with refractive surgery, the assessment of trauma, and determination of intraocular lens position.

A New Axi-Symmetric Element for Thin Walled Structures

NASA Astrophysics Data System (ADS)

Cardoso, Rui P. R.; Yoon, Jeong Whan; Dick, Robert E.

2010-06-01

A new axi-symmetric finite element for sheet metal forming applications is presented in this work. It uses the solid-shell element's concept with only a single element layer and multiple integration points along the thickness direction. The cross section of the element is composed of four nodes with two degrees of freedom each. The proposed formulation overcomes major locking pathologies including transverse shear locking, Poisson's locking and volumetric locking. Some examples are shown to demonstrate the performance and accuracy of the proposed element with special focus on the numerical simulations for the beverage can industry.

Computational Modelling of Materials for Wind Turbine Blades: Selected DTU Wind Energy Activities

PubMed Central

2017-01-01

Computational and analytical studies of degradation of wind turbine blade materials at the macro-, micro-, and nanoscale carried out by the modelling team of the Section Composites and Materials Mechanics, Department of Wind Energy, DTU, are reviewed. Examples of the analysis of the microstructural effects on the strength and fatigue life of composites are shown. Computational studies of degradation mechanisms of wind blade composites under tensile and compressive loading are presented. The effect of hybrid and nanoengineered structures on the performance of the composite was studied in computational experiments as well. PMID:29117138

Intrinsic acoustical cross sections in the multiple scattering by a pair of rigid cylindrical particles in 2D

NASA Astrophysics Data System (ADS)

Mitri, F. G.

2017-08-01

The multiple scattering effects occurring between two scatterers are described based upon the multipole expansion formalism as well as the addition theorem of cylindrical wave functions. An original approach is presented in which an effective incident acoustic field on a particular object, which includes both the primary and re-scattered waves from the other particle is determined first, and then used with the scattered field to derive closed-form analytical expressions for the inherent (i.e. intrinsic) cross-sections based on the far-field scattering. This method does not introduce any approximation in the calculation of the intrinsic cross-sections since the procedure is reduced to the one-body problem. The mathematical expressions for the intrinsic cross-sections are formulated in partial-wave series expansions (PWSEs) in cylindrical coordinates involving the angle of incidence, the addition theorem for the cylindrical wave functions, and the expansion coefficients of the scatterers. Numerical examples illustrate the analysis for two rigid circular cylindrical cross-sections with different radii immersed in a non-viscous fluid. Computations for the dimensionless extrinsic and intrinsic extinction cross-section factors are evaluated with particular emphasis on varying the angle of incidence, the interparticle distance, as well as the sizes of the particles. A symmetric behavior is observed for the dimensionless extrinsic extinction cross-section, while asymmetry arises for the intrinsic extinction cross-section of each particle with respect to the angle of incidence. The present analysis provides a complete analytical and computational method for the prediction of the intrinsic (local) scattering, absorption and extinction cross-sections in the multiple acoustic scatterings of plane progressive waves of arbitrary incidence by a pair of scatterers. The results and computational analyses can be used as a priori information for future applications to guide the direct or inverse characterization of multiple scattering systems in acoustically-engineered metamaterials, cloaking devices, particle dynamics, levitation, manipulation and handling, and other areas.

26 CFR 1.6694-2 - Penalty for understatement due to an unreasonable position.

Code of Federal Regulations, 2010 CFR

2010-04-01

... following examples: Example 1. An individual taxpayer hires Accountant R to prepare its income tax return. A... TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Additions to the Tax, Additional Amounts, and...) Proscribed conduct. Except as otherwise provided in this section, a tax return preparer is liable for a...

26 CFR 1.6115-1 - Disclosure requirements for quid pro quo contributions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 13 2010-04-01 2010-04-01 false Disclosure requirements for quid pro quo contributions. 1.6115-1 Section 1.6115-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... unique qualities of the goods or services that are being valued. (3) Examples. The following examples...

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

26 CFR 1.181-1 - Deduction for qualified film and television production costs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... amount of aggregate production costs that may be claimed as a deduction for a post-amendment production... provides special rules, including rules for recapture of the deduction. Section 1.181-5 provides examples... paid or incurred in connection with obtaining financing for the production (for example, premiums paid...

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

Alternative Fuels Data Center: Federal and State Laws and Incentives

Science.gov Websites

in this section... Search Federal State Local Examples Summary Tables Federal and State Laws and Legislation Find Local Laws and Incentives Find examples of laws and incentives from local governments. For ) Requirements by Year More Laws & Incentives Data | All Maps & Data Case Studies Deploying Clean Buses

76 FR 28265 - Solicitation of Comment To Assist in Study on Assigned Credit Ratings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-16

... Commission requests, in Section II.B, that interested parties address these matters through a series of... in rating structured finance products. For example, in what ways, if any, does the issuer... structured finance products? For example, do certain types of structured finance products account for a...

26 CFR 1.341-6 - Exceptions to application of section.

Code of Federal Regulations, 2011 CFR

2011-04-01

... examples: Example 1. X Corporation is in the business of selling whiskey. The net unrealized appreciation in its whiskey is $20,000 and the net worth of the corporation is $100,000. Since the corporation's whiskey is a subsection (e) asset and since the net unrealized appreciation in subsection (e) assets ($20...

26 CFR 1.341-6 - Exceptions to application of section.

Code of Federal Regulations, 2010 CFR

2010-04-01

... examples: Example 1. X Corporation is in the business of selling whiskey. The net unrealized appreciation in its whiskey is $20,000 and the net worth of the corporation is $100,000. Since the corporation's whiskey is a subsection (e) asset and since the net unrealized appreciation in subsection (e) assets ($20...

26 CFR 1.475(c)-1 - Definitions-dealer in securities.

Code of Federal Regulations, 2010 CFR

2010-04-01

...-customer relationship. Whether a taxpayer is transacting business with customers is determined on the basis... a dealer in securities under section 475(c)(1)(B), and the counterparties are its customers. Example...)(1)(B), and the other banks in the interbank market are its customers. Example 3. B engages in...

26 CFR 1.503(a)-1 - Denial of exemption to certain organizations engaged in prohibited transactions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... educational organization which normally maintains a regular faculty and curriculum and normally has a... application of section 503(b) may be illustrated by the following examples: Example 1. A creates a foundation in 1954 ostensibly for educational purposes. B, a trustee, accumulates the foundation's income from...

26 CFR 1.48-2 - New section 38 property.

Code of Federal Regulations, 2012 CFR

2012-04-01

... of property, the adjusted basis of the reconstructed property as of the time such reconstruction is... machine acquired by the taxpayer will not be treated as being put to original use by the taxpayer. The... following examples: Example 1. If a machine with a total cost of $100,000 is completed after December 31...

26 CFR 1.48-2 - New section 38 property.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of property, the adjusted basis of the reconstructed property as of the time such reconstruction is... machine acquired by the taxpayer will not be treated as being put to original use by the taxpayer. The... following examples: Example 1. If a machine with a total cost of $100,000 is completed after December 31...

26 CFR 1.48-2 - New section 38 property.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of property, the adjusted basis of the reconstructed property as of the time such reconstruction is... machine acquired by the taxpayer will not be treated as being put to original use by the taxpayer. The... following examples: Example 1. If a machine with a total cost of $100,000 is completed after December 31...

26 CFR 1.48-2 - New section 38 property.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of property, the adjusted basis of the reconstructed property as of the time such reconstruction is... machine acquired by the taxpayer will not be treated as being put to original use by the taxpayer. The... following examples: Example 1. If a machine with a total cost of $100,000 is completed after December 31...

16 CFR 803.9 - Filing fee.

Code of Federal Regulations, 2014 CFR

2014-01-01

... minus $1 million. In this example, since “A” is able in good faith to reasonably estimate the... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Filing fee. 803.9 Section 803.9 Commercial... of the Department of Justice. Examples: 1. “A” wishes to acquire voting securities issued by B, where...

26 CFR 1.1252-2 - Special rules.

Code of Federal Regulations, 2010 CFR

2010-04-01

... by the following examples: Example 1. On March 2, 1976, A, a calendar year taxpayer, makes a gift to... $24,000 with $21,000 of such amount attributable to 1971. Upon making the gift, A recognizes no gain...) Aggregate of deductions allowed under sections 175 and 182 $24,000 (2) Minus: Gain recognized as ordinary...

11 CFR 9034.4 - Use of contributions and matching payments; examples of qualified campaign expenses and non...

Code of Federal Regulations, 2013 CFR

2013-01-01

... eligibility under 11 CFR 9033.8. (4) Taxes. Federal income taxes paid by the committee on non-exempt function...; examples of qualified campaign expenses and non-qualified campaign expenses. 9034.4 Section 9034.4 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: PRESIDENTIAL PRIMARY MATCHING...

11 CFR 9034.4 - Use of contributions and matching payments; examples of qualified campaign expenses and non...

Code of Federal Regulations, 2011 CFR

2011-01-01

... eligibility under 11 CFR 9033.8. (4) Taxes. Federal income taxes paid by the committee on non-exempt function...; examples of qualified campaign expenses and non-qualified campaign expenses. 9034.4 Section 9034.4 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: PRESIDENTIAL PRIMARY MATCHING...

11 CFR 9034.4 - Use of contributions and matching payments; examples of qualified campaign expenses and non...

Code of Federal Regulations, 2012 CFR

2012-01-01

... eligibility under 11 CFR 9033.8. (4) Taxes. Federal income taxes paid by the committee on non-exempt function...; examples of qualified campaign expenses and non-qualified campaign expenses. 9034.4 Section 9034.4 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: PRESIDENTIAL PRIMARY MATCHING...

11 CFR 9034.4 - Use of contributions and matching payments; examples of qualified campaign expenses and non...

Code of Federal Regulations, 2014 CFR

2014-01-01

... eligibility under 11 CFR 9033.8. (4) Taxes. Federal income taxes paid by the committee on non-exempt function...; examples of qualified campaign expenses and non-qualified campaign expenses. 9034.4 Section 9034.4 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: PRESIDENTIAL PRIMARY MATCHING...

11 CFR 9034.4 - Use of contributions and matching payments; examples of qualified campaign expenses and non...

Code of Federal Regulations, 2010 CFR

2010-01-01

... eligibility under 11 CFR 9033.8. (4) Taxes. Federal income taxes paid by the committee on non-exempt function...; examples of qualified campaign expenses and non-qualified campaign expenses. 9034.4 Section 9034.4 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: PRESIDENTIAL PRIMARY MATCHING...

26 CFR 1.1502-13 - Intercompany transactions.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., gain, deduction, and loss of members from intercompany transactions. The purpose of this section is to... treatment). For example, S determines its gain or loss from a sale of property to B on a separate entity... of a single corporation (single entity treatment). For example, if S sells land to B at a gain and B...

AstroGrid-D: Grid technology for astronomical science

NASA Astrophysics Data System (ADS)

Enke, Harry; Steinmetz, Matthias; Adorf, Hans-Martin; Beck-Ratzka, Alexander; Breitling, Frank; Brüsemeister, Thomas; Carlson, Arthur; Ensslin, Torsten; Högqvist, Mikael; Nickelt, Iliya; Radke, Thomas; Reinefeld, Alexander; Reiser, Angelika; Scholl, Tobias; Spurzem, Rainer; Steinacker, Jürgen; Voges, Wolfgang; Wambsganß, Joachim; White, Steve

2011-02-01

We present status and results of AstroGrid-D, a joint effort of astrophysicists and computer scientists to employ grid technology for scientific applications. AstroGrid-D provides access to a network of distributed machines with a set of commands as well as software interfaces. It allows simple use of computer and storage facilities and to schedule or monitor compute tasks and data management. It is based on the Globus Toolkit middleware (GT4). Chapter 1 describes the context which led to the demand for advanced software solutions in Astrophysics, and we state the goals of the project. We then present characteristic astrophysical applications that have been implemented on AstroGrid-D in chapter 2. We describe simulations of different complexity, compute-intensive calculations running on multiple sites (Section 2.1), and advanced applications for specific scientific purposes (Section 2.2), such as a connection to robotic telescopes (Section 2.2.3). We can show from these examples how grid execution improves e.g. the scientific workflow. Chapter 3 explains the software tools and services that we adapted or newly developed. Section 3.1 is focused on the administrative aspects of the infrastructure, to manage users and monitor activity. Section 3.2 characterises the central components of our architecture: The AstroGrid-D information service to collect and store metadata, a file management system, the data management system, and a job manager for automatic submission of compute tasks. We summarise the successfully established infrastructure in chapter 4, concluding with our future plans to establish AstroGrid-D as a platform of modern e-Astronomy.

Galerkin projection for geometrically-exact multilayer beams allowing for ply drop-off

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vu-Quoc, L.; Deng, H.

1995-12-31

Focusing on the static case in the present work, we develop a Galerkin projection of the resulting nonlinear governing equations of equilibrium for geometrically exact sandwich beams and 1-D plates developed. In the proposed theory, each layer in the beam can have different thickness and length. As such one can use the present formulation to model an important class of multilayer structures having ply drop-off. No restriction is imposed on the magnitude of the displacement field, whose continuity across the layer interfaces is exactly enforced. The layer cross section in the deformed beam is assumed to remain straight, but notmore » orthogonal to the layer centroidal line, thus shear deformation in each layer is accounted for. Also no restriction is imposed on the rotation of a layer cross section. It follows that the overall cross section in the deformed beam is continuous piecewise linear, and can be best thought of as a chain of rigid links, connected by hinges. The overall deformation of a multilayer beam can be described by the deformation of a reference layer. The unknown kinematic quantities are therefore the two displacement components of the deformed centroidal line of a reference layer, and the finite rotations of the layers. The present theory can be used to analyze large deformation in sandwich beams. Numerical examples, such as roll-up maneuver and sandwich beam with ply drop-off, which underline the salient features of the formulation are presented. Saint-Venant principle is demonstrated for very short sandwich beams. The readers are referred to the paper for detail.« less

Do Example Sentences Work in Direct Vocabulary Learning?

ERIC Educational Resources Information Center

Baicheng, Zhang

2009-01-01

In the present study of language learning, three presentation modes (varying from providing or not providing example sentences by the teacher and by the students themselves) have been utilised to examine the effectiveness of using example sentences in vocabulary presentation and learning activities. The study is of 58 English majors as the…

29 CFR 784.117 - Combinations of exempt work.

Code of Federal Regulations, 2010 CFR

2010-07-01

... combination of exempt work under sections 13(a)(5) and 13(b)(4), or one of these sections with exempt work... example, an employee may devote part of his workweek to work within section 13(b)(4) and the remainder to... overtime work during that week (C.F. Mitchell v. Myrtle Grove Packing Co., 350 U.S. 891; Tobin v. Blue...

Predicting indoor pollutant concentrations, and applications to air quality management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lorenzetti, David M.

Because most people spend more than 90% of their time indoors, predicting exposure to airborne pollutants requires models that incorporate the effect of buildings. Buildings affect the exposure of their occupants in a number of ways, both by design (for example, filters in ventilation systems remove particles) and incidentally (for example, sorption on walls can reduce peak concentrations, but prolong exposure to semivolatile organic compounds). Furthermore, building materials and occupant activities can generate pollutants. Indoor air quality depends not only on outdoor air quality, but also on the design, maintenance, and use of the building. For example, ''sick building'' symptomsmore » such as respiratory problems and headaches have been related to the presence of air-conditioning systems, to carpeting, to low ventilation rates, and to high occupant density (1). The physical processes of interest apply even in simple structures such as homes. Indoor air quality models simulate the processes, such as ventilation and filtration, that control pollutant concentrations in a building. Section 2 describes the modeling approach, and the important transport processes in buildings. Because advection usually dominates among the transport processes, Sections 3 and 4 describe methods for predicting airflows. The concluding section summarizes the application of these models.« less

Fuel cell assembly fluid flow plate having conductive fibers and rigidizing material therein

DOEpatents

Walsh, Michael M.

2000-01-01

A fluid flow plate is preferably formed with three initial sections, for instance, two layers of conductive (e.g., metal) fibers and a barrier material (e.g., metal foil) which is interposed between the two layers. For example, sintering of these three sections can provide electrical path(s) between outer faces of the two layers. Then, the sintered sections can be, for instance, placed in a mold for forming of flow channel(s) into one or more of the outer faces. Next, rigidizing material (e.g., resin) can be injected into the mold, for example, to fill and/or seal space(s) about a conductive matrix of the electrical path(s). Preferably, abrading of surface(s) of the outer face(s) serves to expose electrical contact(s) to the electrical path(s).

A pendulum experiment on added mass and equivalence.

NASA Astrophysics Data System (ADS)

Donnelly, Russell; Neill, Douglas; Livelybrooks, Dean

2005-11-01

The concept of added mass in fluid mechanics has been known for many years. A familiar example is the accelerated motion of a sphere through an inviscid fluid which has an added mass of one-half the mass of the fluid displaced. This result is widely used in quantum fluids; for example giving a finite mass to a trapped electron in superfluid helium-4, which is a free electron in a bubble about 36 Angstroms in diameter. A derivation of this result is contained in Landau-Lifshitz ``Fluid Mechanics'', Section 12. The period of oscillation of a simple pendulum in a vacuum is independent of the mass because of the principle of equivalence of gravitational and inertial masses. In a fluid however, both buoyancy and added mass enter the problem. We present results of experiments of simple pendulums of different materials oscillating in various fluids. The results agree closely with the results obtained for the added mass in inviscid fluids, as expected.

Oppositional Decoding as an Act of Resistance.

ERIC Educational Resources Information Center

Steiner, Linda

Specific social groups express themselves through their own particularized media. For example, "MS" magazine directs its communication to feminist readers, and as a part of this, regularly reprints advertisements and news clipping taken from mainstream media in its "No Comment" section. This section provides opportunities for…

26 CFR 1.617-1 - Exploration expenditures.

Code of Federal Regulations, 2012 CFR

2012-04-01

... commercial exploitation by the taxpayer. For example, core drilling expenditures paid or incurred by the... of this section. Expenditures paid or incurred in connection with core drilling to further delineate... meaning of this section. Also, expenditures for exploratory drilling from within a producing mine to...

26 CFR 1.617-1 - Exploration expenditures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... commercial exploitation by the taxpayer. For example, core drilling expenditures paid or incurred by the... of this section. Expenditures paid or incurred in connection with core drilling to further delineate... meaning of this section. Also, expenditures for exploratory drilling from within a producing mine to...

26 CFR 1.617-1 - Exploration expenditures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... commercial exploitation by the taxpayer. For example, core drilling expenditures paid or incurred by the... of this section. Expenditures paid or incurred in connection with core drilling to further delineate... meaning of this section. Also, expenditures for exploratory drilling from within a producing mine to...