Epidemiology of vampire bat-transmitted rabies virus in Goiás, central Brazil: re-evaluation based on G-L intergenic region

PubMed Central

2010-01-01

Background Vampire bat related rabies harms both livestock industry and public health sector in central Brazil. The geographical distributions of vampire bat-transmitted rabies virus variants are delimited by mountain chains. These findings were elucidated by analyzing a high conserved nucleoprotein gene. This study aims to elucidate the detailed epidemiological characters of vampire bat-transmitted rabies virus by phylogenetic methods based on 619-nt sequence including unconserved G-L intergenic region. Findings The vampire bat-transmitted rabies virus isolates divided into 8 phylogenetic lineages in the previous nucleoprotein gene analysis were divided into 10 phylogenetic lineages with significant bootstrap values. The distributions of most variants were reconfirmed to be delimited by mountain chains. Furthermore, variants in undulating areas have narrow distributions and are apparently separated by mountain ridges. Conclusions This study demonstrates that the 619-nt sequence including G-L intergenic region is more useful for a state-level phylogenetic analysis of rabies virus than the partial nucleoprotein gene, and simultaneously that the distribution of vampire bat-transmitted RABV variants tends to be separated not only by mountain chains but also by mountain ridges, thus suggesting that the diversity of vampire bat-transmitted RABV variants was delimited by geographical undulations. PMID:21059233

Betweenness-Based Method to Identify Critical Transmission Sectors for Supply Chain Environmental Pressure Mitigation.

PubMed

Liang, Sai; Qu, Shen; Xu, Ming

2016-02-02

To develop industry-specific policies for mitigating environmental pressures, previous studies primarily focus on identifying sectors that directly generate large amounts of environmental pressures (a.k.a. production-based method) or indirectly drive large amounts of environmental pressures through supply chains (e.g., consumption-based method). In addition to those sectors as important environmental pressure producers or drivers, there exist sectors that are also important to environmental pressure mitigation as transmission centers. Economy-wide environmental pressure mitigation might be achieved by improving production efficiency of these key transmission sectors, that is, using less upstream inputs to produce unitary output. We develop a betweenness-based method to measure the importance of transmission sectors, borrowing the betweenness concept from network analysis. We quantify the betweenness of sectors by examining supply chain paths extracted from structural path analysis that pass through a particular sector. We take China as an example and find that those critical transmission sectors identified by betweenness-based method are not always identifiable by existing methods. This indicates that betweenness-based method can provide additional insights that cannot be obtained with existing methods on the roles individual sectors play in generating economy-wide environmental pressures. Betweenness-based method proposed here can therefore complement existing methods for guiding sector-level environmental pressure mitigation strategies.

Towards a service bus for distributed manufacturing

NASA Astrophysics Data System (ADS)

Delgado-Gomes, Vasco; Oliveira-Lima, José A.; Martins, João F.; Jardim-Gonçalves, Ricardo

2013-10-01

The electronic exchange of data between industrial equipment, manufacturing and information systems of companies is becoming increasingly important with the current trend of reducing products' life cycle, wide range of diversified products, and the need to answer the specific needs of each consumer. In this context, quality, time, costs involved in integrating information over the company's internal processes, and in the interaction of these processes with their customers, suppliers and other business partners are in many sectors, far beyond what the current technology and communications solutions enable. This paper presents a communication infrastructure to integrate several companies from different sectors of the supply chain, to exchange their heterogeneous information using a data model which is composed by different standards.

Consequence and Resilience Modeling for Chemical Supply Chains

NASA Technical Reports Server (NTRS)

Stamber, Kevin L.; Vugrin, Eric D.; Ehlen, Mark A.; Sun, Amy C.; Warren, Drake E.; Welk, Margaret E.

2011-01-01

The U.S. chemical sector produces more than 70,000 chemicals that are essential material inputs to critical infrastructure systems, such as the energy, public health, and food and agriculture sectors. Disruptions to the chemical sector can potentially cascade to other dependent sectors, resulting in serious national consequences. To address this concern, the U.S. Department of Homeland Security (DHS) tasked Sandia National Laboratories to develop a predictive consequence modeling and simulation capability for global chemical supply chains. This paper describes that capability , which includes a dynamic supply chain simulation platform called N_ABLE(tm). The paper also presents results from a case study that simulates the consequences of a Gulf Coast hurricane on selected segments of the U.S. chemical sector. The case study identified consequences that include impacted chemical facilities, cascading impacts to other parts of the chemical sector. and estimates of the lengths of chemical shortages and recovery . Overall. these simulation results can DHS prepare for and respond to actual disruptions.

The UK waste input-output table: Linking waste generation to the UK economy.

PubMed

Salemdeeb, Ramy; Al-Tabbaa, Abir; Reynolds, Christian

2016-10-01

In order to achieve a circular economy, there must be a greater understanding of the links between economic activity and waste generation. This study introduces the first version of the UK waste input-output table that could be used to quantify both direct and indirect waste arisings across the supply chain. The proposed waste input-output table features 21 industrial sectors and 34 waste types and is for the 2010 time-period. Using the waste input-output table, the study results quantitatively confirm that sectors with a long supply chain (i.e. manufacturing and services sectors) have higher indirect waste generation rates compared with industrial primary sectors (e.g. mining and quarrying) and sectors with a shorter supply chain (e.g. construction). Results also reveal that the construction, mining and quarrying sectors have the highest waste generation rates, 742 and 694 tonne per £1m of final demand, respectively. Owing to the aggregated format of the first version of the waste input-output, the model does not address the relationship between waste generation and recycling activities. Therefore, an updated version of the waste input-output table is expected be developed considering this issue. Consequently, the expanded model would lead to a better understanding of waste and resource flows in the supply chain. © The Author(s) 2016.

Costing the supply chain for delivery of ACT and RDTs in the public sector in Benin and Kenya.

PubMed

Shretta, Rima; Johnson, Brittany; Smith, Lisa; Doumbia, Seydou; de Savigny, Don; Anupindi, Ravi; Yadav, Prashant

2015-02-05

Studies have shown that supply chain costs are a significant proportion of total programme costs. Nevertheless, the costs of delivering specific products are poorly understood and ballpark estimates are often used to inadequately plan for the budgetary implications of supply chain expenses. The purpose of this research was to estimate the country level costs of the public sector supply chain for artemisinin-based combination therapy (ACT) and rapid diagnostic tests (RDTs) from the central to the peripheral levels in Benin and Kenya. A micro-costing approach was used and primary data on the various cost components of the supply chain was collected at the central, intermediate, and facility levels between September and November 2013. Information sources included central warehouse databases, health facility records, transport schedules, and expenditure reports. Data from document reviews and semi-structured interviews were used to identify cost inputs and estimate actual costs. Sampling was purposive to isolate key variables of interest. Survey guides were developed and administered electronically. Data were extracted into Microsoft Excel, and the supply chain cost per unit of ACT and RDT distributed by function and level of system was calculated. In Benin, supply chain costs added USD 0.2011 to the initial acquisition cost of ACT and USD 0.3375 to RDTs (normalized to USD 1). In Kenya, they added USD 0.2443 to the acquisition cost of ACT and USD 0.1895 to RDTs (normalized to USD 1). Total supply chain costs accounted for more than 30% of the initial acquisition cost of the products in some cases and these costs were highly sensitive to product volumes. The major cost drivers were found to be labour, transport, and utilities with health facilities carrying the majority of the cost per unit of product. Accurate cost estimates are needed to ensure adequate resources are available for supply chain activities. Product volumes should be considered when costing supply chain functions rather than dollar value. Further work is needed to develop extrapolative costing models that can be applied at country level without extensive micro-costing exercises. This will allow other countries to generate more accurate estimates in the future.

Sectorial analysis of nanotechnology companies in Argentina

NASA Astrophysics Data System (ADS)

Foladori, Guillermo; Lau, Edgar Záyago; Carroza, Tomás; Appelbaum, Richard P.; Villa, Liliana; Robles-Belmont, Eduardo

2017-06-01

In this paper, we identify 37 companies that produce nano-enabled products in Argentina. We locate the products of these firms in terms of both their economic sector and position in a value chain. The research was done through a four-step methodology. Firstly, an inventory of firms was created. Secondly, the firms were classified by their economic sector, following the United Nations economic classification. Thirdly, the firms were located within a simple nanotechnology value chain. Finally, the products were classified according to their final destination, being either means of production or final consumer products. The results show that healthcare, cosmetics, and medicine is the most represented sector along the value chain, followed by electronics.

Energy use in the New Zealand food system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patterson, M.G.; Earle, M.D.

1985-03-01

The study covered the total energy requirements of the production, processing, wholesale distribution, retailing, shopping and household sectors of the food system in New Zealand. This included the direct energy requirements, and the indirect energy requirements in supplying materials, buildings and equipment. Data were collected from a wide range of literature sources, and converted into forms required for this research project. Also, data were collected in supplementary sample surveys at the wholesale distribution, retailing and shopping sectors. The details of these supplementary surveys are outlined in detailed survey reports fully referenced in the text. From these base data, the totalmore » energy requirements per unit product (MJ/kg) were estimated for a wide range of food chain steps. Some clear alternatives in terms of energy efficiency emerged from a comparison of these estimates. For example, it was found that it was most energy efficient to use dehydrated vegetables, followed by fresh vegetables, freeze dried vegetables, canned vegetables and then finally frozen vegetables.« less

Measuring the environmental sustainability performance of global supply chains: A multi-regional input-output analysis for carbon, sulphur oxide and water footprints.

PubMed

Acquaye, Adolf; Feng, Kuishuang; Oppon, Eunice; Salhi, Said; Ibn-Mohammed, Taofeeq; Genovese, Andrea; Hubacek, Klaus

2017-02-01

Measuring the performance of environmentally sustainable supply chains instead of chain constitute has become a challenge despite the convergence of the underlining principles of sustainable supply chain management. This challenge is exacerbated by the fact that supply chains are inherently dynamic and complex and also because multiple measures can be used to characterize performances. By identifying some of the critical issues in the literature regarding performance measurements, this paper contributes to the existing body of literature by adopting an environmental performance measurement approach for economic sectors. It uses economic sectors and evaluates them on a sectoral level in specific countries as well as part of the Global Value Chain based on the established multi-regional input-output (MRIO) modeling framework. The MRIO model has been used to calculate direct and indirect (that is supply chain or upstream) environmental effects such as CO 2 , SO 2 , biodiversity, water consumption and pollution to name just a few of the applications. In this paper we use MRIO analysis to calculate emissions and resource consumption intensities and footprints, direct and indirect impacts, and net emission flows between countries. These are exemplified by using carbon emissions, sulphur oxide emissions and water use in two highly polluting industries; Electricity production and Chemical industry in 33 countries, including the EU-27, Brazil, India and China, the USA, Canada and Japan from 1995 to 2009. Some of the highlights include: On average, direct carbon emissions in the electricity sector across all 27 member states of the EU was estimated to be 1368 million tons and indirect carbon emissions to be 470.7 million tons per year representing 25.6% of the EU-27 total carbon emissions related to this sector. It was also observed that from 2004, sulphur oxide emissions intensities in electricity production in India and China have remained relatively constant at about 62.8 gSO x /, respectively, $ and 84.4 gSO x /$ although being higher than in other countries. In terms of water use, the high water use intensity in China (1040.27 L/$) and India (961.63 L/$), which are among the highest in the sector in the electricity sector is exacerbated by both countries being ranked as High Water Stress Risk countries. The paper also highlights many advantages of the MRIO approach including: a 15-year time series study (which provides a measurement of environmental performance of key industries and an opportunity to assess technical and technological change during the investigated time period), a supply chain approach that provides a consistent methodological framework and accounts for all upstream supply chain environmental impacts throughout entire global supply chains. The paper also discusses the implications of the study to environmental sustainability performance measurement in terms of the level of analysis from a value chain hierarchy perspective, methodological issues, performance indicators, environmental exchanges and policy relevance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimizing energy for a ‘green’ vaccine supply chain

PubMed Central

Lloyd, John; McCarney, Steve; Ouhichi, Ramzi; Lydon, Patrick; Zaffran, Michel

2015-01-01

This paper describes an approach piloted in the Kasserine region of Tunisia to increase the energy efficiency of the distribution of vaccines and temperature sensitive drugs. The objectives of an approach, known as the ‘net zero energy’ (NZE) supply chain were demonstrated within the first year of operation. The existing distribution system was modified to store vaccines and medicines in the same buildings and to transport them according to pre-scheduled and optimized delivery circuits. Electric utility vehicles, dedicated to the integrated delivery of vaccines and medicines, improved the regularity and reliability of the supply chains. Solar energy, linked to the electricity grid at regional and district stores, supplied over 100% of consumption meeting all energy needs for storage, cooling and transportation. Significant benefits to the quality and costs of distribution were demonstrated. Supply trips were scheduled, integrated and reliable, energy consumption was reduced, the recurrent cost of electricity was eliminated and the release of carbon to the atmosphere was reduced. Although the initial capital cost of scaling up implementation of NZE remain high today, commercial forecasts predict cost reduction for solar energy and electric vehicles that may permit a step-wise implementation over the next 7–10 years. Efficiency in the use of energy and in the deployment of transport is already a critical component of distribution logistics in both private and public sectors of industrialized countries. The NZE approach has an intensified rationale in countries where energy costs threaten the maintenance of public health services in areas of low population density. In these countries where the mobility of health personnel and timely arrival of supplies is at risk, NZE has the potential to reduce energy costs and release recurrent budget to other needs of service delivery while also improving the supply chain. PMID:25444811

Emissions of mercury from the power sector in Poland

NASA Astrophysics Data System (ADS)

Zyśk, J.; Wyrwa, A.; Pluta, M.

2011-01-01

Poland belongs to the European Union countries with the highest mercury emissions. This is mainly related to coal combustion. This paper presents estimates of mercury emissions from power sector in Poland. In this work, the bottom-up approach was applied and over 160 emission point sources were analysed. For each, the characteristics of the whole technological chain starting from fuel quality, boiler type as well as emission controls were taken into account. Our results show that emissions of mercury from brown coal power plants in 2005 were nearly four times greater than those of hard coal power plants. These estimates differ significantly from national statistics and some possible reasons are discussed. For the first time total mercury emissions from the Polish power sector were differentiated into its main atmospheric forms: gaseous elemental (GEM), reactive gaseous (RGM) and particulate-bound mercury. Information on emission source location and the likely vertical distribution of mercury emissions, which can be used in modelling of atmospheric dispersion of mercury is also provided.

Cost Effective Measures to Reduce CO2 Emissions in the Air Freight Sector

NASA Technical Reports Server (NTRS)

Blinge, Magnus

2003-01-01

This paper presents cost effective measures to reduce CO2 emissions in the air freight sector. One door-to-door transport chain is studied in detail from a Scandinavian city to a city in southern Europe. The transport chain was selected by a group of representatives from the air freight sector in order to encompass general characteristics within the sector. Three different ways of shipping air cargo are studied, i.e., by air freighter, as belly freight (in passenger aircrafts) and trucking. CO2 emissions are calculated for each part of the transport chain and its relative importance towards the total amount CO2 emitted during the whole transport chain is shown. It is confirmed that the most CO2 emitting part of the transport chain is the actual flight and that it is in the take-off and climbing phases that most fuel are burned. It is also known that the technical development of aircraft implies a reduction in fuel consumption for each new generation of aircraft. Thus, the aircraft manufacturers have an important role in this development. Having confirmed these observations, this paper focuses on other factors that significantly affects the fuel consumption. Analyzed factors are, e.g., optimization of speed and altitude, traffic management, congestion on and around the airfields, tankering, "latest acceptance time" for goods and improving the load factor. The different factors relative contribution to the total emission levels for the transport chain has been estimated.

What are we missing? Scope 3 greenhouse gas emissions accounting in the metals and minerals industry

NASA Astrophysics Data System (ADS)

Greene, Suzanne E.

2018-05-01

Metal and mineral companies have significant greenhouse gas emissions in their upstream and downstream value chains due to outsourced extraction, beneficiation and transportation activities, depending on a firm's business model. While many companies move towards more transparent reporting of corporate greenhouse gas emissions, value chain emissions remain difficult to capture, particularly in the global supply chain. Incomplete reports make it difficult for companies to track emissions reductions goals or implement sustainable supply chain improvements, especially for commodity products that form the base of many other sector's value chains. Using voluntarily-reported CDP data, this paper sheds light on hotspots in value chain emissions for individual metal and mineral companies, and for the sector as a whole. The state of value chain emissions reporting for the industry is discussed in general, with a focus on where emissions could potentially be underestimated and how estimates could be improved.

Environmental footprints in the meat chain

NASA Astrophysics Data System (ADS)

Đekić, I.; Tomašević, I.

2017-09-01

The objective of this paper was to present environmental performance of the meat chain and highlight main environmental footprints. The meat sector is recognized as one of the leading polluting sectors in the food industry. The meat chain was analyzed from a five-link perspective introducing the following actors: farm(er)s, slaughterhouses, meat processors, customers and consumers. Meat production needs natural resources (water and energy) resulting in waste and waste water discharge. As an outcome it has a high influence on climate change in respect to global warming, acidification and eutrophication potentials and ozone depletion substances.

Growing ethanol sector drives corn supply chain shift for the last decade

NASA Astrophysics Data System (ADS)

Kim, T.; Schmitt, J.; Brauman, K. A.; Smith, T. M.; Suh, K.

2017-12-01

The US is the largest producer in the world, 89% of corn production uses in domestic demands in 2012. Carbon emission and irrigated water usage in the corn farming stage are hot-spot in the meat production sectors, comprise 37% of all US corn demand. The annual capacity of the ethanol sector increases from 6.5 billion gallons to 15.3 billion gallons for the last decade. The growth of corn demand in ethanol sector makes corn supply chain shift. Most of the ethanol plants located in the Mid-west where is the top 12 corn producing states. Therefore animal feeds take more supply from the other states. The purpose of this study is to estimate environmental impacts and water scarcity associated embedded corn by the temporal and spatial corn supply chain model based on a cost minimization. We use publicly available county-level data on corn production, feed demands, aggregative carbon emission and irrigated water usage in farming state, and a water depletion index as a metric for determining water scarcity. The water stressed counties produce 23.3% of US total corn production in 2012, and the irrigated corn is 14.2%. We simulated the corn supply chain using linear programming and developed the web-based visualization tools called FoodS3 (Food Systems Supply-chain Sustainability tool, http://foods3.org).

Health supply chain management.

PubMed

Zimmerman, Rolf; Gallagher, Pat

2010-01-01

This chapter gives an educational overview of: * The actual application of supply chain practice and disciplines required for service delivery improvement within the current health environment. * A rationale for the application of Supply Chain Management (SCM) approaches to the Health sector. * The tools and methods available for supply chain analysis and benchmarking. * Key supply chain success factors.

Current Barriers to Large-scale Interoperability of Traceability Technology in the Seafood Sector.

PubMed

Hardt, Marah J; Flett, Keith; Howell, Colleen J

2017-08-01

Interoperability is a critical component of full-chain digital traceability, but is almost nonexistent in the seafood industry. Using both quantitative and qualitative methodology, this study explores the barriers impeding progress toward large-scale interoperability among digital traceability systems in the seafood sector from the perspectives of seafood companies, technology vendors, and supply chains as a whole. We highlight lessons from recent research and field work focused on implementing traceability across full supply chains and make some recommendations for next steps in terms of overcoming challenges and scaling current efforts. © 2017 Institute of Food Technologists®.

Tracing Primary PM2.5 emissions via Chinese supply chains

NASA Astrophysics Data System (ADS)

Meng, Jing; Liu, Junfeng; Xu, Yuan; Tao, Shu

2015-05-01

In this study, we examine a supply-chain approach to more effectively mitigate primary PM2.5 emissions in China from the perspectives of production, consumption and their linkages using structural path analysis. We identify the pattern of all supply chain paths using principal component analysis. To address the severe haze problems in China, it is important to understand how final demand purchase initiates production processes and ultimately leads to primary PM2.5 emission. We found that consumers’ demands on power and transportation mainly induce direct emissions, quite different from the demands on construction, industry and service products which largely drive emissions in upstream activities. We also found that nearly 80% of the economic sectors in China follow a similar pattern in generating primary PM2.5 emissions in electricity, cement and the ferrous metal industries; but only the construction sector increases the release of PM2.5 due to the production of non-metallic mineral products. These findings indicate that further reduction of end-of-pipe emissions in the power and transportation sectors will facilitate cleaner production in almost all the economic sectors. However, for urbanization induced emissions, China should mitigate PM2.5 emissions through the supply chain of construction, either severely reducing its life-cycle intensity or carefully planning to avoid extensive, unnecessary building activity.

Private sector embedded water risk: Merging the corn supply chain network and regional watershed depletion

NASA Astrophysics Data System (ADS)

Kim, T.; Brauman, K. A.; Schmitt, J.; Goodkind, A. L.; Smith, T. M.

2016-12-01

Water scarcity in US corn farming regions is a significant risk consideration for the ethanol and meat production sectors, which comprise 80% of all US corn demand. Water supply risk can lead to effects across the supply chain, affecting annual corn yields. The purpose of our study is to assess the water risk to the US's most corn-intensive sectors and companies by linking watershed depletion estimates with corn production, linked to downstream companies through a corn transport model. We use a water depletion index as an improved metric for seasonal water scarcity and a corn sourcing supply chain model based on economic cost minimization. Water depletion was calculated as the fraction of renewable (ground and surface) water consumption, with estimates of more than 75% depletion on an annual average basis indicating a significant water risk. We estimated company water risk as the amount of embedded corn coming from three categories of water stressed counties. The ethanol sector had 3.1% of sourced corn grown from counties that were more than 75% depleted while the beef sector had 14.0%. From a firm perspective, Tyson, JBS, Cargill, the top three US corn demanding companies, had 4.5%, 9.6%, 12.8% of their sourced corn respectively, coming from watersheds that are more than 75% depleted. These numbers are significantly higher than the global average of 2.2% of watersheds being classified as more than 75% depleted. Our model enables corn using industries to evaluate their supply chain risk of water scarcity through modeling corn sourcing and watershed depletion, providing the private sector a new method for risk estimation. Our results suggest corn dependent industries are already linked to water scarcity risk in disproportionate amounts due to the spatial heterogeneity of corn sourcing and water scarcity.

Wesley Cole | NREL

Science.gov Websites

. Areas of Expertise Capacity expansion modeling of the U.S. electricity sector Renewable energy models Interaction of rooftop PV deployment with the greater electricity sector Impacts of policies on the evolution of the electricity sector Interactions of the natural gas supply chain with the

Quantifying Short-Chain Chlorinated Paraffin Congener Groups.

PubMed

Yuan, Bo; Bogdal, Christian; Berger, Urs; MacLeod, Matthew; Gebbink, Wouter A; Alsberg, Tomas; de Wit, Cynthia A

2017-09-19

Accurate quantification of short-chain chlorinated paraffins (SCCPs) poses an exceptional challenge to analytical chemists. SCCPs are complex mixtures of chlorinated alkanes with variable chain length and chlorination level; congeners with a fixed chain length (n) and number of chlorines (m) are referred to as a "congener group" C n Cl m . Recently, we resolved individual C n Cl m by mathematically deconvolving soft ionization high-resolution mass spectra of SCCP mixtures. Here we extend the method to quantifying C n Cl m by introducing C n Cl m specific response factors (RFs) that are calculated from 17 SCCP chain-length standards with a single carbon chain length and variable chlorination level. The signal pattern of each standard is measured on APCI-QTOF-MS. RFs of each C n Cl m are obtained by pairwise optimization of the normal distribution's fit to the signal patterns of the 17 chain-length standards. The method was verified by quantifying SCCP technical mixtures and spiked environmental samples with accuracies of 82-123% and 76-109%, respectively. The absolute differences between calculated and manufacturer-reported chlorination degrees were -0.9 to 1.0%Cl for SCCP mixtures of 49-71%Cl. The quantification method has been replicated with ECNI magnetic sector MS and ECNI-Q-Orbitrap-MS. C n Cl m concentrations determined with the three instruments were highly correlated (R 2 > 0.90) with each other.

A design of strategic alliance based on value chain of surveying and mapping enterprises in China

NASA Astrophysics Data System (ADS)

Duan, Hong; Huang, Xianfeng

2007-06-01

In this paper, we use value chain and strategic alliance theories to analyzing the surveying and mapping Industry and enterprises. The value chain of surveying and mapping enterprises is highly-contacted but split by administrative interference, the enterprises are common small scale. According to the above things, we consider that establishing a nonequity- Holding strategic alliance based on value chain is an available way, it can not only let the enterprises share the superior resources in different sectors of the whole value chain each other but avoid offending the interests of related administrative departments, by this way, the surveying and mapping enterprises gain development respectively and totally. Then, we give the method to building up the strategic alliance model through parting the value chain and the using advantage of companies in different value chain sectors. Finally, we analyze the internal rule of strategic alliance and prove it is a suitable way to realize the development of surveying and mapping enterprises through game theory.

[Quality of medicines in least developed countries].

PubMed

Videau, J Y

2006-12-01

Due to worsening economic conditions and poor enforcement of existing pharmaceutical and customs regulations, third world countries are faced with a growing threat from counterfeit and substandard medicines. With the expansion of illicit markets in urban areas, the sales of medicines of uncertain quality and origin are increasing. Most victims of this illicit trade are among the world's poorest populations that cannot afford to buy quality drugs through private-sector distribution channels. National pharmaceutical programs promoting universal access to essential generic medicines at reasonable cost are the key to curbing this problem. A system based on strict, rational pharmaceutical purchasing and distribution policies with quality assurance at every level of the supply chain is needed to guarantee that patients receive safe effective high quality healthcare products.

On Condensation Properties of Bethe Roots Associated with the XXZ Chain

NASA Astrophysics Data System (ADS)

Kozlowski, Karol K.

2018-02-01

I prove that the Bethe roots describing either the ground state or a certain class of "particle-hole" excited states of the XXZ spin-1/2 chain in any sector with magnetisation m \\in [0;1/2] exist, are uniquely defined, and form, in the infinite volume limit, a dense distribution on a subinterval of R. The results hold for any value of the anisotropy {Δ ≥ -1}. In fact, I establish an even stronger result, namely the existence of an all order asymptotic expansion of the counting function associated with such roots. As a corollary, these results allow one to prove the existence and form of the infinite volume limit of various observables attached to the model -the excitation energy, momentum, the zero temperature correlation functions, so as to name a few- that were argued earlier in the literature.

Family Farmers and Major Retail Chains in the Brazilian Organic Sector: Assessing New Development Pathways. A Case Study in a Peri-Urban District of Sao Paulo

ERIC Educational Resources Information Center

Blanc, Julien

2009-01-01

The expansion of the organic sector in Brazil is seen as a leverage for the social emancipation of the small family farmers. Next to the traditional alternatives circuits of organic food and farming, new powerful capitalistic actors, such as supermarket chains, are rapidly entering the Brazilian organic arena. Can family farming benefit from the…

77 FR 17001 - USDA Public Stakeholder Meeting: Match Making in the Biofuels Value Chain

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... to improve awareness and increase understanding of the biofuels supply chain links between all those.... At this meeting, federal officials will provide a short profile of each section of the supply chain... that outline their experiences in that respective supply chain sector, barriers and lessons learned...

Distributions of positive correlations in sectoral value added growth in the global economic network*

NASA Astrophysics Data System (ADS)

Maluck, Julian; Donner, Reik V.

2017-02-01

International trade has grown considerably during the process of globalization. Complex supply chains for the production of goods have resulted in an increasingly connected International Trade Network (ITN). Traditionally, direct trade relations between industries have been regarded as mediators of supply and demand spillovers. With increasing network connectivity the question arises if higher-order relations become more important in explaining a national sector's susceptibility to supply and demand changes of its trading partner. In this study we address this question by investigating empirically to what extent the topological properties of the ITN provide information about positive correlations in the production of two industry sectors. We observe that although direct trade relations between industries serve as important indicators for correlations in the industries' value added growth, opportunities of substitution for required production inputs as well as second-order trade relations cannot be neglected. Our results contribute to a better understanding of the relation between trade and economic productivity and can serve as a basis for the improvement of crisis spreading models that evaluate contagion threats in the case of a node's failure in the ITN.

The California Baseline Methane Survey

NASA Astrophysics Data System (ADS)

Duren, R. M.; Thorpe, A. K.; Hopkins, F. M.; Rafiq, T.; Bue, B. D.; Prasad, K.; Mccubbin, I.; Miller, C. E.

2017-12-01

The California Baseline Methane Survey is the first systematic, statewide assessment of methane point source emissions. The objectives are to reduce uncertainty in the state's methane budget and to identify emission mitigation priorities for state and local agencies, utilities and facility owners. The project combines remote sensing of large areas with airborne imaging spectroscopy and spatially resolved bottom-up data sets to detect, quantify and attribute emissions from diverse sectors including agriculture, waste management, oil and gas production and the natural gas supply chain. Phase 1 of the project surveyed nearly 180,000 individual facilities and infrastructure components across California in 2016 - achieving completeness rates ranging from 20% to 100% per emission sector at < 5 meters spatial resolution. Additionally, intensive studies of key areas and sectors were performed to assess source persistence and variability at times scales ranging from minutes to months. Phase 2 of the project continues with additional data collection in Spring and Fall 2017. We describe the survey design and measurement, modeling and analysis methods. We present initial findings regarding the spatial, temporal and sectoral distribution of methane point source emissions in California and their estimated contribution to the state's total methane budget. We provide case-studies and lessons learned about key sectors including examples where super-emitters were identified and mitigated. We summarize challenges and recommendations for future methane research, inventories and mitigation guidance within and beyond California.

Optimizing energy for a 'green' vaccine supply chain.

PubMed

Lloyd, John; McCarney, Steve; Ouhichi, Ramzi; Lydon, Patrick; Zaffran, Michel

2015-02-11

This paper describes an approach piloted in the Kasserine region of Tunisia to increase the energy efficiency of the distribution of vaccines and temperature sensitive drugs. The objectives of an approach, known as the 'net zero energy' (NZE) supply chain were demonstrated within the first year of operation. The existing distribution system was modified to store vaccines and medicines in the same buildings and to transport them according to pre-scheduled and optimized delivery circuits. Electric utility vehicles, dedicated to the integrated delivery of vaccines and medicines, improved the regularity and reliability of the supply chains. Solar energy, linked to the electricity grid at regional and district stores, supplied over 100% of consumption meeting all energy needs for storage, cooling and transportation. Significant benefits to the quality and costs of distribution were demonstrated. Supply trips were scheduled, integrated and reliable, energy consumption was reduced, the recurrent cost of electricity was eliminated and the release of carbon to the atmosphere was reduced. Although the initial capital cost of scaling up implementation of NZE remain high today, commercial forecasts predict cost reduction for solar energy and electric vehicles that may permit a step-wise implementation over the next 7-10 years. Efficiency in the use of energy and in the deployment of transport is already a critical component of distribution logistics in both private and public sectors of industrialized countries. The NZE approach has an intensified rationale in countries where energy costs threaten the maintenance of public health services in areas of low population density. In these countries where the mobility of health personnel and timely arrival of supplies is at risk, NZE has the potential to reduce energy costs and release recurrent budget to other needs of service delivery while also improving the supply chain. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

The hydrogen value chain: applying the automotive role model of the hydrogen economy in the aerospace sector to increase performance and reduce costs

NASA Astrophysics Data System (ADS)

Frischauf, Norbert; Acosta-Iborra, Beatriz; Harskamp, Frederik; Moretto, Pietro; Malkow, Thomas; Honselaar, Michel; Steen, Marc; Hovland, Scott; Hufenbach, Bernhard; Schautz, Max; Wittig, Manfred; Soucek, Alexander

2013-07-01

Hydrogen will assume a key role in Europe's effort to adopt its energy dependent society to satisfy its needs without releasing vast amounts of greenhouse gases. The paradigm shift is so paramount that one speaks of the "Hydrogen Economy", as the energy in this new and ecological type of economy is to be distributed by hydrogen. However, H2 is not a primary energy source but rather an energy carrier, a means of storing, transporting and distributing energy, which has to be generated by other means. Various H2 storage methods are possible; however industries' favourite is the storage of gaseous hydrogen in high pressure tanks. The biggest promoter of this storage methodology is the automotive industry, which is currently preparing for the generation change from the fossil fuel internal combustion engines to hydrogen based fuel cells. The current roadmaps foresee a market roll-out by 2015, when the hydrogen supply infrastructure is expected to have reached a critical mass. The hydrogen economy is about to take off as being demonstrated by various national mobility strategies, which foresee several millions of electric cars driving on the road in 2020. Fuel cell cars are only one type of "electric car", battery electric as well as hybrid cars - all featuring electric drive trains - are the others. Which type of technology is chosen for a specific application depends primarily on the involved energy storage and power requirements. These considerations are very similar to the ones in the aerospace sector, which had introduced the fuel cell already in the 1960s. The automotive sector followed only recently, but has succeeded in moving forward the technology to a level, where the aerospace sector is starting considering to spin-in terrestrial hydrogen technologies into its technology portfolio. Target areas are again high power/high energy applications like aviation, manned spaceflight and exploration missions, as well as future generation high power telecommunication satellites. Similar trends can be expected in the future for RADAR Earth Observation satellites and space infrastructure concepts of great scale. This paper examines current activities along the hydrogen value chain, both in the terrestrial and the aerospace sector. A general assessment of the synergy potential is complemented by a thorough analysis of specific applications serving as role models like a lunar manned base or pressurised rover, an aircraft APU or a high power telecommunications satellite. Potential performance improvements and cost savings serve as key performance indicators in these comparisons and trade-offs.

Mapping Global Flows of Chemicals: From Fossil Fuel Feedstocks to Chemical Products.

PubMed

Levi, Peter G; Cullen, Jonathan M

2018-02-20

Chemical products are ubiquitous in modern society. The chemical sector is the largest industrial energy consumer and the third largest industrial emitter of carbon dioxide. The current portfolio of mitigation options for the chemical sector emphasizes upstream "supply side" solutions, whereas downstream mitigation options, such as material efficiency, are given comparatively short shrift. Key reasons for this are the scarcity of data on the sector's material flows, and the highly intertwined nature of its complex supply chains. We provide the most up to date, comprehensive and transparent data set available publicly, on virgin production routes in the chemical sector: from fossil fuel feedstocks to chemical products. We map global mass flows for the year 2013 through a complex network of transformation processes, and by taking account of secondary reactants and by-products, we maintain a full mass balance throughout. The resulting data set partially addresses the dearth of publicly available information on the chemical sector's supply chain, and can be used to prioritise downstream mitigation options.

Community resiliency through recovery resource supply chain planning.

PubMed

Franklin, Charlotte; Todt, Kiersten

2014-01-01

Information in this paper is the result of recommendations and remedies developed at 'Local Supply Chain Capacity in a Crisis Summit Exercise' held in Arlington, VA on 30th-31st January,2013. At the event, which was funded through the Regional Catastrophic Preparedness Grant Program, national private sector and not-for-profit essential resource provider experts in sectors such as transportation, communication systems, energy/power, financial resources, medical supplies and other vital supplies, together with emergency managers, discussed best practices, major challenges and exchanged remedy recommendations.

Exact quantum numbers of collapsed and non-collapsed two-string solutions in the spin-1/2 Heisenberg spin chain

NASA Astrophysics Data System (ADS)

Deguchi, Tetsuo; Ranjan Giri, Pulak

2016-04-01

Every solution of the Bethe-ansatz equations (BAEs) is characterized by a set of quantum numbers, by which we can evaluate it numerically. However, no general rule is known how to give quantum numbers for the physical solutions of BAE. For the spin-1/2 XXX chain we rigorously derive all the quantum numbers for the complete set of the Bethe-ansatz eigenvectors in the two down-spin sector with any chain length N. Here we obtain them both for real and complex solutions. We also show that all the solutions associated with them are distinct. Consequently, we prove the completeness of the Bethe ansatz and give an exact expression for the number of real solutions which correspond to collapsed bound-state solutions (i.e., two-string solutions) in the sector: 2[(N-1)/2-(N/π ){{tan}}-1(\\sqrt{N-1})] in terms of Gauss’ symbol. Moreover, we prove in the sector the scheme conjectured by Takahashi for solving BAE systematically. We also suggest that by applying the present method we can derive the quantum numbers for the spin-1/2 XXZ chain.

Analog and numerical experiments investigating force chain influences on bed conditions in granular flows

NASA Astrophysics Data System (ADS)

Estep, J.; Dufek, J.

2013-12-01

Granular flows are fundamental processes in several terrestrial and planetary natural events; including surficial flows on volcanic edifices, debris flows, landslides, dune formation, rock falls, sector collapses, and avalanches. Often granular flows can be two-phase, whereby interstitial fluids occupy void space within the particulates. The mobility of granular flows has received significant attention, however the physics that govern their internal behavior remain poorly understood. Here we extend upon previous research showing that force chains can transmit extreme localized forces to the substrates of free surface granular flows, and we combine experimental and computational approaches to further investigate the forces at the bed of simplified granular flows. Analog experiments resolve discrete bed forces via a photoelastic technique, while numerical experiments validate laboratory tests using discrete element model (DEM) simulations. The current work investigates (1) the role of distributed grain sizes on force transmission via force chains, and (2) how the inclusion of interstitial fluids effects force chain development. We also include 3D numerical simulations to apply observed 2D characteristics into real world perspective, and ascertain if the added dimension alters force chain behavior. Previous research showed that bed forces generated by force chain structures can transiently greatly exceed (by several 100%) the bed forces predicted from continuum approaches, and that natural materials are more prone to excessive bed forces than photoelastic materials due to their larger contact stiffnesses. This work suggests that force chain activity may play an important role in the bed physics of dense granular flows by influencing substrate entrainment. Photoelastic experiment image showing force chains in gravity driven granular flow.

An Exploration of Supply Chain Management Practices in the Central District Municipality

ERIC Educational Resources Information Center

Ambe, I. M.

2009-01-01

The main objective of the paper is to explore supply chain management practices in the Central District Municipality, North West province of South Africa, using the grounded theory methodology. Supply chain management was introduced in the South African public sector to alleviate deficiencies related to governance, interpretation and…

Morphometric and landsliding analyses in chain domain: the Roccella basin, NE Sicily, Italy

NASA Astrophysics Data System (ADS)

Rapisarda, Francesco

2009-10-01

The dynamic interaction of endogenic and exogenic processes in active geodynamic context leads to the deterioration of the physico-mechanical characteristics of the rocks, inducing slopes instability. In such context, the morphometric parameters and the analysis of landslide distribution contribute to appraise the evolutive state of hydrographic basins. The aim of the study is the morphometric characterization of the Roccella Torrent basin (Rtb) located in South Italy. Landsliding and tectonic structure dynamically interact with the drainage pattern that records these effects and permits the definition of the evolutive geomorphic stage of the basin. The Air Photograph Investigation and field surveys permitted to draw the main geomorphic features, the drainage pattern of the Rtb, to calculate the morphometric parameters and to delimit the landslides’ bodies. Detailed analysis about the landslide distribution within a test site 17 km2 wide were carried out to elaborate indicative indexes of the landslides type and to single out the lithotypes that are more involved in slope instability phenomena. The morphometric parameters indicate the rejuvenation state within the Rtb where the stream reaches show the effects of increased energy relief in agreement with the geological settings of this sector of the Apennine-Maghrebian Chain.

General squark flavour mixing: constraints, phenomenology and benchmarks

DOE PAGES

De Causmaecker, Karen; Fuks, Benjamin; Herrmann, Bjorn; ...

2015-11-19

Here, we present an extensive study of non-minimal flavour violation in the squark sector in the framework of the Minimal Supersymmetric Standard Model. We investigate the effects of multiple non-vanishing flavour-violating elements in the squark mass matrices by means of a Markov Chain Monte Carlo scanning technique and identify parameter combinations that are favoured by both current data and theoretical constraints. We then detail the resulting distributions of the flavour-conserving and flavour-violating model parameters. Based on this analysis, we propose a set of benchmark scenarios relevant for future studies of non-minimal flavour violation in the Minimal Supersymmetric Standard Model.

Symmetry-Resolved Entanglement in Many-Body Systems.

PubMed

Goldstein, Moshe; Sela, Eran

2018-05-18

Similarly to the system Hamiltonian, a subsystem's reduced density matrix is composed of blocks characterized by symmetry quantum numbers (charge sectors). We present a geometric approach for extracting the contribution of individual charge sectors to the subsystem's entanglement measures within the replica trick method, via threading appropriate conjugate Aharonov-Bohm fluxes through a multisheet Riemann surface. Specializing to the case of 1+1D conformal field theory, we obtain general exact results for the entanglement entropies and spectrum, and apply them to a variety of systems, ranging from free and interacting fermions to spin and parafermion chains, and verify them numerically. We find that the total entanglement entropy, which scales as lnL, is composed of sqrt[lnL] contributions of individual subsystem charge sectors for interacting fermion chains, or even O(L^{0}) contributions when total spin conservation is also accounted for. We also explain how measurements of the contribution to the entanglement from separate charge sectors can be performed experimentally with existing techniques.

Symmetry-Resolved Entanglement in Many-Body Systems

NASA Astrophysics Data System (ADS)

Goldstein, Moshe; Sela, Eran

2018-05-01

Similarly to the system Hamiltonian, a subsystem's reduced density matrix is composed of blocks characterized by symmetry quantum numbers (charge sectors). We present a geometric approach for extracting the contribution of individual charge sectors to the subsystem's entanglement measures within the replica trick method, via threading appropriate conjugate Aharonov-Bohm fluxes through a multisheet Riemann surface. Specializing to the case of 1 +1 D conformal field theory, we obtain general exact results for the entanglement entropies and spectrum, and apply them to a variety of systems, ranging from free and interacting fermions to spin and parafermion chains, and verify them numerically. We find that the total entanglement entropy, which scales as ln L , is composed of √{ln L } contributions of individual subsystem charge sectors for interacting fermion chains, or even O (L0) contributions when total spin conservation is also accounted for. We also explain how measurements of the contribution to the entanglement from separate charge sectors can be performed experimentally with existing techniques.

RFID in the healthcare supply chain: usage and application.

PubMed

Kumar, Sameer; Swanson, Eric; Tran, Thuy

2009-01-01

The purposes of this study are to first, determine the most efficient and cost effective portions of the healthcare supply chain in which radio frequency identification devices (RFID) can be implemented. Second, provide specific examples of RFID implementation and show how these business applications will add to the effectiveness of the healthcare supply chain. And third, to describe the current state of RFID technology and to give practical information for managers in the healthcare sector to make sound decisions about the possible implementation of RFID technology within their organizations. Healthcare industry literature was reviewed and examples of specific instances of RFID implementation were examined using an integrated simulation model developed with Excel, @Risk and Visio software tools. Analysis showed that the cost of implementing current RFID technology is too expensive for broad and sweeping implementation within the healthcare sector at this time. However, several example applications have been identified in which this technology can be effectively leveraged in a cost-effective way. This study shows that RFID technology has come a long way in the recent past and has potential to improve healthcare sector productivity and efficiency. Implementation by large companies such as Wal-mart has helped to make the technology become much more economical in its per unit cost as well as its supporting equipment and training costs. The originality of this study lies in the idea that few practical and pragmatic approaches have been taken within the academic field of study for the implementation of RFID into the healthcare supply chain. Much of the research has focused on specific companies or portions of the supply chain and not the entire supply chain. Also, many of the papers have discussed the future of the supply chain that is heavily dependent on advances in RFID technology. A few viable applications of how RFID technology can be implemented in the healthcare supply chain are presented and how the current state of technology limits the broad use and implementation of this technology in the healthcare industry.

An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices

NASA Astrophysics Data System (ADS)

Shahlan, M. Z.; Sidek, A. A.; Suffian, S. A.; Hazza, M. H. F. A.; Daud, M. R. C.

2018-01-01

In this paper, climate change and global warming are the biggest current issues in the industrial sectors. The green supply chain managements (GSCM) is one of the crucial input to these issues. Effective GSCM can potentially secure the organization’s competitive advantage and improve the environmental performance of the network activities. In this study, the aim is to investigate and examine how a small and medium enterprises (SMEs) stakeholder pressure and top management influence green supply chain management practices. The study is further advance green supply chain management research in Malaysia focusing on SMEs manufacturing sector using structural equation modelling. Structural equation modelling is a multivariate statistical analysis technique used to examine structural relationship. It is the combination of factor analysis and multi regression analysis and used to analyse structural relationship between measure variable and latent factor. This research found that top management support and stakeholder pressure is the major influence for SMEs to adopt green supply chain management. The research also found that top management is fully mediate with the relationship between stakeholder pressure and monitoring supplier environmental performance.

Sectoral Patterns of Interactive Learning: An Empirical Exploration of a Case in a Dutch Region.

ERIC Educational Resources Information Center

Meeus, Marius T. H.; Oerlemans, Leon A. G.; Hage, Jerald

2001-01-01

Pursues the development of a theoretical framework that explains interactive learning between innovator firms and external actors in both the knowledge infrastructure and the production chain. Analyzes models in four sectors with distinct technological dynamics as distinguished by Pavitt. (DDR)

Electrical changes of the polar ionosphere during magnetospheric substorms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahn, B.H.; Kamide, Y.; Akasofu, S.H.

1986-05-01

Changes of the distribution of the potential, electric fields, ionospheric currents, field-aligned currents, the Joule heat production rate, the particle energy injection rate and the total energy dissipation rate are examined in detail by comparing them at a presubstorm epoch and the maximum epoch for several substorms on March 17, 18, and 19, 1978. The data sets are obtained on the basis of the magnetic records from the six International Magnetospheric Study meridian chains of observatories by using the computer code developed by Kamide e-italict-italic a-italicl-italic. (1981) and the conductivity model developed by Ahn et al. (1983b). A number ofmore » global features that are found to be common to most of the substorms examined in this study include the following: (1) The positive potential cell in the morning sector extends into the evening sector during substorms. (2) When it is intensified, the westward electrojet on the nightside tends to flow equatorward of the positive potential ridge. (3) The so-called ''Harang discontinuity'' may be identified as the ridge of the negative potential cell. (4) The distribution of field- aligned currents determined by our method is more complicated than the statistical pattern obtained by polar orbiting satellites. (5) The basic ionospheric current pattern is fundamentally the same during a fairly quiet period, a slightly disturbed period and a substorm period. (6) The highest Joule heat production occurs along the westward extension of the westward electrojet, while the particle energy injection rate is high along the westward electrojet in the morning sector.« less

Energy Levels and Co-evolution of Product Innovation in Supply Chain Clusters

NASA Astrophysics Data System (ADS)

Ji, Guojun

In the last decade supply chain clusters phenomenon has emerged as a new approach in product innovation studies. This article makes three contributions to the approach by addressing some open issues. The first contribution is to explicitly incorporate the energy levels in the analysis. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. The second contribution is to suggest an analytical distinction between different evolution method, actors involved in them, and the institutions which guide actor's perceptions and activities. Thirdly, the article opens up the black box of institutions, making them an integral part of supply chain. The article provides a coherent conceptual multi-level perspective, using insights from sociology, institutional theory and innovation studies. The perspective is particularly useful to analyze long-term dynamics supply chain clusters phenomenon, shifts from one energy level to another and the co-evolution of product innovation.

Clean energy and the hydrogen economy.

PubMed

Brandon, N P; Kurban, Z

2017-07-28

In recent years, new-found interest in the hydrogen economy from both industry and academia has helped to shed light on its potential. Hydrogen can enable an energy revolution by providing much needed flexibility in renewable energy systems. As a clean energy carrier, hydrogen offers a range of benefits for simultaneously decarbonizing the transport, residential, commercial and industrial sectors. Hydrogen is shown here to have synergies with other low-carbon alternatives, and can enable a more cost-effective transition to de-carbonized and cleaner energy systems. This paper presents the opportunities for the use of hydrogen in key sectors of the economy and identifies the benefits and challenges within the hydrogen supply chain for power-to-gas, power-to-power and gas-to-gas supply pathways. While industry players have already started the market introduction of hydrogen fuel cell systems, including fuel cell electric vehicles and micro-combined heat and power devices, the use of hydrogen at grid scale requires the challenges of clean hydrogen production, bulk storage and distribution to be resolved. Ultimately, greater government support, in partnership with industry and academia, is still needed to realize hydrogen's potential across all economic sectors.This article is part of the themed issue 'The challenges of hydrogen and metals'. © 2017 The Author(s).

The Space Sector and Civilization of Intangible Assets

NASA Astrophysics Data System (ADS)

Hernandez, Daniel

The value of a company is no longer solely measured according to the value of its assets (stock of raw materials, products being manufactured or finished products, machines and tools, real estate, etc.). Intangible assets are also becoming increasingly important, especially in Western economies which have massively transferred the production of goods to the so-called emerging countries offering lower labor costs. Numerous companies subcontracting their production focus on the study and design of new products and their marketing. As a result, the intangible assets (patents, brands, distribution networks, etc.) represent a growing proportion of the value of companies. Nevertheless, it is not impossible, as we saw several decades ago with Japan, for example, that the "emerging" countries which largely depend on contract production and copies, move more or less quickly to economies including the entire chain from design to production of original products. We will analyze here the importance of intangible assets in the space sector, especially as regards orbital systems (satellites and associated ground facilities). While the space sector remains dominated by states through the orders they generate and the regulations they impose on the space industry, the commercial market continues to develop and, with it, the importance of marketing actions and more generally the development of distinctive brands.

Sector switching among histopathologists in KwaZulu-Natal, South Africa: a qualitative study.

PubMed

Ruggunan, Shaun D; Singh, Suveera

2013-05-30

The mobility of health care professionals from the public to private sector is prevalent in South Africa. However, literature on sector switching of clinical doctors remains limited. It is against this background that this study aims to make the labour market visible for histopathologists and identify the reasons for sector switching. This study is exploratory and descriptive. It uses qualitative methods, such as in-depth interviews, with 70% (n = 16/23) of the population of histopathologists in KwaZulu-Natal, South Africa. Lee's (1966) push-pull theory is adapted to explain the pull sector switching behaviours of histopathologists. Interviews were recorded and independently transcribed. The narratives of the participants were coded to reflect the main themes that contributed to their sector switching behaviours. Five key themes emerged as reasons for the mobility of histopathologists from the public to private sector in KwaZulu-Natal. The findings indicate that remuneration, working conditions, work flexibility, career pathing and autonomy of labour processes are the key drivers of this mobility. Histopathologists provide a core function in the health care chain. However, their invisibility in academic discourse in both public health and human resources for health indicates the paucity of research undertaken on the importance of these specialists in the health care chain. This is especially significant in developing countries like South Africa, where there is a dearth of these specialists. This study, while exploratory, aims to open a dialogue to better understand their reasons for sector switching and, hopefully, inform policies on training, recruitment and retention of these specialists.

Sector switching among histopathologists in KwaZulu-Natal, South Africa: a qualitative study

PubMed Central

2013-01-01

Background The mobility of health care professionals from the public to private sector is prevalent in South Africa. However, literature on sector switching of clinical doctors remains limited. It is against this background that this study aims to make the labour market visible for histopathologists and identify the reasons for sector switching. Methods This study is exploratory and descriptive. It uses qualitative methods, such as in-depth interviews, with 70% (n = 16/23) of the population of histopathologists in KwaZulu-Natal, South Africa. Lee’s (1966) push-pull theory is adapted to explain the pull sector switching behaviours of histopathologists. Interviews were recorded and independently transcribed. The narratives of the participants were coded to reflect the main themes that contributed to their sector switching behaviours. Results Five key themes emerged as reasons for the mobility of histopathologists from the public to private sector in KwaZulu-Natal. The findings indicate that remuneration, working conditions, work flexibility, career pathing and autonomy of labour processes are the key drivers of this mobility. Conclusions Histopathologists provide a core function in the health care chain. However, their invisibility in academic discourse in both public health and human resources for health indicates the paucity of research undertaken on the importance of these specialists in the health care chain. This is especially significant in developing countries like South Africa, where there is a dearth of these specialists. This study, while exploratory, aims to open a dialogue to better understand their reasons for sector switching and, hopefully, inform policies on training, recruitment and retention of these specialists. PMID:23721129

Measuring the impact of final demand on global production system based on Markov process

NASA Astrophysics Data System (ADS)

Xing, Lizhi; Guan, Jun; Wu, Shan

2018-07-01

Input-output table is a comprehensive and detailed in describing the national economic systems, consisting of supply and demand information among various industrial sectors. The complex network, a theory and method for measuring the structure of complex system, can depict the structural properties of social and economic systems, and reveal the complicated relationships between the inner hierarchies and the external macroeconomic functions. This paper tried to measure the globalization degree of industrial sectors on the global value chain. Firstly, it constructed inter-country input-output network models to reproduce the topological structure of global economic system. Secondly, it regarded the propagation of intermediate goods on the global value chain as Markov process and introduced counting first passage betweenness to quantify the added processing amount when globally final demand stimulates this production system. Thirdly, it analyzed the features of globalization at both global and country-sector level

Integrable open spin chains from flavored ABJM theory

NASA Astrophysics Data System (ADS)

Bai, Nan; Chen, Hui-Huang; He, Song; Wu, Jun-Bao; Yang, Wen-Li; Zhu, Meng-Qi

2017-08-01

We compute the two-loop anomalous dimension matrix in the scalar sector of planar N=3 flavored ABJM theory. Using coordinate Bethe ansatz, we obtain the reflection matrices and confirm that the boundary Yang-Baxter equations are satisfied. This establishes the integrability of this theory in the scalar sector at the two-loop order.

Nearly Half Of All Medicare Hospice Enrollees Received Care From Agencies Owned By Regional Or National Chains

PubMed Central

Stevenson, David G.; Dalton, Jesse B.; Grabowski, David C.; Huskamp, Haiden A.

2016-01-01

To date, analyses of ownership in the US hospice sector have focused on the growth of for-profit hospice and on aggregate differences in patient populations and service use patterns between for-profit and not-for-profit agencies. Although such comparisons are useful, they do not offer insights about the types of organizations that comprise the hospice sector, including the emergence of multi-agency chains. Using Medicare Cost Reports from 2000 to 2011, we track the evolution of the US hospice industry, not only to describe the market's composition by profit status but also to provide new information about the roles of regional and national chains. Almost half of all Medicare hospice enrollees received these services from a multi-agency chain in 2011. Although a handful of companies play a prominent role, the presence of smaller for-profit and not-for-profit hospice chains also has grown in recent years. By focusing on the role of the diverse organizations that provide hospice care, our analyses can help inform efforts to monitor and assure quality of care, to assess payment adequacy and options for reform, and to facilitate greater transparency and accountability within the hospice marketplace. PMID:25561641

Notes on integrable boundary interactions of open SU(4) alternating spin chains

NASA Astrophysics Data System (ADS)

Wu, JunBao

2018-07-01

Ref. [J. High Energy Phys. 1708, 001 (2017)] showed that the planar flavored Ahanory-Bergman-Jafferis-Maldacena (ABJM) theory is integrable in the scalar sector at two-loop order using coordinate Bethe ansatz. A salient feature of this case is that the boundary reflection matrices are anti-diagonal with respect to the chosen basis. In this paper, we relax the coefficients of the boundary terms to be general constants to search for integrable systems among this class. We found that the only integrable boundary interaction at each end of the spin chain aside from the one in ref. [J. High Energy Phys. 1708, 001 (2017)] is the one with vanishing boundary interactions leading to diagonal reflection matrices. We also construct non-supersymmetric planar flavored ABJM theory which leads to trivial boundary interactions at both ends of the open chain from the two-loop anomalous dimension matrix in the scalar sector.

Assistive technologies along supply chains in health care and in the social services sector.

PubMed

Mayer, Peter; Hauer, Katharina; Schloffer, Evelyn; Leyrer, Barbara

2015-01-01

Health care systems in Austria and Slovenia are currently facing challenges due to scarce resources and demographic change which can be seen especially along the supply chains. The main objective of this paper is to present an option to improve the use of assistive technologies. An extensive literature research for the theoretic part as well as a qualitative survey for the empiric part focusing on short-term care were carried out. Results show that there is a lack of information and training on assistive technologies. As a consequence, their full potential cannot be exploited. Therefore a guideline for nursing consultations was developed. To conclude, both the literature research and the qualitative survey show that assistive technologies have high potentials to improve the supply chains in the health care and social services sector, but there is a lot of information and training on them needed.

Air pollution and health impact emboided in supply chains in China

NASA Astrophysics Data System (ADS)

Zhang, Q.

2016-12-01

Close economic linkage and consequent air pollutant emissions embodied in trade among Chinese regions have been widely discussed. Yet the related health impacts across regions remain unaddressed. Here, we integrated four state-of-the-art models to for the first time estimate PM2.5 related premature deaths along the supply chains across seven Chinese regions, and we quantified cross impacts among receptors, producers, assemblers, consumers, and sectors. We find that, due to the atmospheric transport, in 2010, 33% of national premature deaths were caused by emissions released in other regions, and the trans-boundary effect is more significant from north to south and from east to west. From a supply chain perspective, 38% of national premature deaths were associated with production for in a region to supply other regions' consumption. For instance, 20-35% of premature deaths related to the highly developed east coastal regions' consumption were caused by emissions in the central and western regions. Sectorally, similar to the widely concerned heavy industries, direct emissions from agricultural and residential activities together contributed near half of national total premature deaths, posing a great challenge for recent pollution reduction action, which are mainly focusing on industrial restructuring. Our results emphasize the importance of regarding pollution related premature deaths in China as a national systemic problem, instead of targeting the pollution producers (region or sector) in isolation. Multilateral and multi-sector cooperation is in urgent need to improve the national atmospheric environment.

Lifestyle Entrepreneurs: Insights into Blackpool's Small Hotel Sector

ERIC Educational Resources Information Center

Rowson, William; Lashley, Conrad

2012-01-01

Branded chains dominate sections of commercial hospitality provision; however, the vast majority of firms in the sector are micro businesses employing 10 or fewer staff. In fact, most are so small as to employ no permanent staff. In many cases, those running these businesses are not classic entrepreneurs driven by a need to maximise profits and…

75 FR 11512 - Consultative Group to Eliminate the Use of Child Labor and Forced Labor in Imported Agricultural...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-11

... include three members from the agriculture-related private sector; two members from institutions of higher... the 2008 Farm Bill. The Act provides for the creation of the Consultative Group. DATES: March 18, 2010... the global supply chains within the agricultural sector or other industries; (b) The roles and...

Training in the Retail Sector. A Survey for the FORCE Programme. First Edition.

ERIC Educational Resources Information Center

Kruse, Wilfried; And Others

Training in the retail sector throughout the 12 European Community (EC) member countries was examined through in-depth case studies of 55 retail firms that were selected as representing a wide range of firm types (19 multinational, 36 national, 4 cooperative, 7 family-owned firms), forms of retailing (department stores, supermarkets, and chain and…

Multiplicity in public health supply systems: a learning agenda.

PubMed

Bornbusch, Alan; Bates, James

2013-08-01

Supply chain integration-merging products for health programs into a single supply chain-tends to be the dominant model in health sector reform. However, multiplicity in a supply system may be justified as a risk management strategy that can better ensure product availability, advance specific health program objectives, and increase efficiency.

Using National Inventories for Estimating Environmental Impacts of Products from Industrial Sectors: A Case Study of Ethanol and Gasoline

EPA Science Inventory

PurposeIn order to understand the environmental outcomes associated with the life cycle of a product, to compare these outcomes across products, or to design more sustainable supply chains, it is often desirable to estimate results for a reference supply chain representative of t...

Shelf-life prediction models for ready-to-eat fresh cut salads: Testing in real cold chain.

PubMed

Tsironi, Theofania; Dermesonlouoglou, Efimia; Giannoglou, Marianna; Gogou, Eleni; Katsaros, George; Taoukis, Petros

2017-01-02

The aim of the study was to develop and test the applicability of predictive models for shelf-life estimation of ready-to-eat (RTE) fresh cut salads in realistic distribution temperature conditions in the food supply chain. A systematic kinetic study of quality loss of RTE mixed salad (lollo rosso lettuce-40%, lollo verde lettuce-45%, rocket-15%) packed under modified atmospheres (3% O 2 , 10% CO 2 , 87% N 2 ) was conducted. Microbial population (total viable count, Pseudomonas spp., lactic acid bacteria), vitamin C, colour and texture were the measured quality parameters. Kinetic models for these indices were developed to determine the quality loss and calculate product remaining shelf-life (SL R ). Storage experiments were conducted at isothermal (2.5-15°C) and non-isothermal temperature conditions (T eff =7.8°C defined as the constant temperature that results in the same quality value as the variable temperature distribution) for validation purposes. Pseudomonas dominated spoilage, followed by browning and chemical changes. The end of shelf-life correlated with a Pseudomonas spp. level of 8 log(cfu/g), and 20% loss of the initial vitamin C content. The effect of temperature on these quality parameters was expressed by the Arrhenius equation; activation energy (E a ) value was 69.1 and 122.6kJ/mol for Pseudomonas spp. growth and vitamin C loss rates, respectively. Shelf-life prediction models were also validated in real cold chain conditions (including the stages of transport to and storage at retail distribution center, transport to and display at 7 retail stores, transport to and storage in domestic refrigerators). The quality level and SL R estimated after 2-3days of domestic storage (time of consumption) ranged between 1 and 8days at 4°C and was predicted within satisfactory statistical error by the kinetic models. T eff in the cold chain ranged between 3.7 and 8.3°C. Using the validated models, SL R of RTE fresh cut salad can be estimated at any point of the cold chain if the temperature history is known. Shelf-life models of validated applicability can serve as an effective tool for shelf-life assessment and the development of new products in the fresh produce food sector. Copyright © 2016. Published by Elsevier B.V.

Consumers in a Sustainable Food Supply Chain (COSUS): Understanding Consumer Behavior to Encourage Food Waste Reduction

PubMed Central

Rohm, Harald; Oostindjer, Marije; Aschemann-Witzel, Jessica; Symmank, Claudia; L. Almli, Valérie; de Hooge, Ilona E.; Normann, Anne; Karantininis, Kostas

2017-01-01

Consumers are directly and indirectly responsible for a significant fraction of food waste which, for a large part, could be avoided if they were willing to accept food that is suboptimal, i.e., food that deviates in sensory characteristics (odd shape, discoloration), or that has a best-before date which is approaching or has passed, but that is still perfectly fine to eat. The choice to accept or discard suboptimal food is taken either before or after purchase (hence, in the retail store or in the household). The aim of the European research project COSUS (Consumers in a sustainable food supply chain) was to increase consumer acceptance of suboptimal food, before and after purchase, by implementing targeted strategies that are based on consumer insights, and that are feasible for and acceptable by the food sector. To reach this aim, different methodological approaches were applied to analyze this issue, to experiment with different aspects, and to test the resulting interventions. Each of these approaches was undertaken by competent consortium partners from Denmark, Germany, Norway, Sweden and The Netherlands. The project finally provides validated strategies to promote the distribution and consumption of suboptimal foods, thereby improving resource efficiency in the food chain and contributing to a more sustainable food supply. PMID:29186883

Consumers in a Sustainable Food Supply Chain (COSUS): Understanding Consumer Behavior to Encourage Food Waste Reduction.

PubMed

Rohm, Harald; Oostindjer, Marije; Aschemann-Witzel, Jessica; Symmank, Claudia; L Almli, Valérie; de Hooge, Ilona E; Normann, Anne; Karantininis, Kostas

2017-11-27

Consumers are directly and indirectly responsible for a significant fraction of food waste which, for a large part, could be avoided if they were willing to accept food that is suboptimal, i.e., food that deviates in sensory characteristics (odd shape, discoloration), or that has a best-before date which is approaching or has passed, but that is still perfectly fine to eat. The choice to accept or discard suboptimal food is taken either before or after purchase (hence, in the retail store or in the household). The aim of the European research project COSUS (Consumers in a sustainable food supply chain) was to increase consumer acceptance of suboptimal food, before and after purchase, by implementing targeted strategies that are based on consumer insights, and that are feasible for and acceptable by the food sector. To reach this aim, different methodological approaches were applied to analyze this issue, to experiment with different aspects, and to test the resulting interventions. Each of these approaches was undertaken by competent consortium partners from Denmark, Germany, Norway, Sweden and The Netherlands. The project finally provides validated strategies to promote the distribution and consumption of suboptimal foods, thereby improving resource efficiency in the food chain and contributing to a more sustainable food supply.

Global Carbon Fiber Composites Supply Chain Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Sujit; Warren, Josh; West, Devin

This analysis identifies key opportunities in the carbon fiber supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas — wind energy, aerospace, automotive, and pressure vessels — that top the list of industries using carbon fiber and carbon fiber reinforced polymers. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components.

Effects of the financial crisis on the wealth distribution of Korea's companies

NASA Astrophysics Data System (ADS)

Lim, Kyuseong; Kim, Soo Yong; Swanson, Todd; Kim, Jooyun

2017-02-01

We investigated the distribution functions of Korea's top-rated companies during two financial crises. A power-law scaling for rank distribution, as well as cumulative probability distribution, was found and observed as a general pattern. Similar distributions can be shown in other studies of wealth and income distributions. In our study, the Pareto exponents designating the distribution differed before and after the crisis. The companies covered in this research are divided into two subgroups during a period when the subprime mortgage crisis occurred. Various industrial sectors of Korea's companies were found to respond differently during the two financial crises, especially the construction sector, financial sectors, and insurance groups.

Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain

PubMed Central

2017-01-01

The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization. PMID:28873432

Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain.

PubMed

Xing, Lizhi

2017-01-01

The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization.

Performance improvement: an active life cycle product management

NASA Astrophysics Data System (ADS)

Cucchiella, Federica; Gastaldi, Massimo; Lenny Koh, S. C.

2010-03-01

The management of the supply chain has gained importance in many manufacturing firms. Operational flexibility can be considered a crucial weapon to increase competitiveness in a turbulent marketplace. It reflects the ability of a firm to properly and rapidly respond to a variable and dynamic environment. For the firm operating in a fashion sector, the management of the supply chain is even more complex because the product life cycle is shorter than that of the firm operating in a non-fashion sector. The increase of firm flexibility level can be reached through the application of the real option theory inside the firm network. In fact, real option may increase the project value by allowing managers to more efficiently direct the production. The real option application usually analysed in literature does not take into account that the demands of products are well-defined by the product life cycle. Working on a fashion sector, the life cycle pattern is even more relevant because of an expected demand that grows according to a constant rate that does not capture the demand dynamics of the underlying fashion goods. Thus, the primary research objective of this article is to develop a model useful for the management of investments in a supply chain operating in a fashion sector where the system complexity is increased by the low level of unpredictability and stability that is proper of the mood phenomenon. Moreover, unlike the traditional model, a real option framework is presented here that considers fashion product characterised by uncertain stages of the production cycle.

Tool for assessing health and equity impacts of interventions modifying air quality in urban environments.

PubMed

Cartier, Yuri; Benmarhnia, Tarik; Brousselle, Astrid

2015-12-01

Urban outdoor air pollution (AP) is a major public health concern but the mechanisms by which interventions impact health and social inequities are rarely assessed. Health and equity impacts of policies and interventions are questioned, but managers and policy agents in various institutional contexts have very few practical tools to help them better orient interventions in sectors other than the health sector. Our objective was to create such a tool to facilitate the assessment of health impacts of urban outdoor AP interventions by non-public health experts. An iterative process of reviewing the academic literature, brainstorming, and consultation with experts was used to identify the chain of effects of urban outdoor AP and the major modifying factors. To test its applicability, the tool was applied to two interventions, the London Low Emission Zone and the Montréal BIXI public bicycle-sharing program. We identify the chain of effects, six categories of modifying factors: those controlling the source of emissions, the quantity of emissions, concentrations of emitted pollutants, their spatial distribution, personal exposure, and individual vulnerability. Modifiable and non-modifiable factors are also identified. Results are presented in the text but also graphically, as we wanted it to be a practical tool, from pollution sources to emission, exposure, and finally, health effects. The tool represents a practical first step to assessing AP-related interventions for health and equity impacts. Understanding how different factors affect health and equity through air pollution can provide insight to city policymakers pursuing Health in All Policies. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Characteristics of Equatorial and Low-Latitude Plasma Irregularities as Investigated Using a Meridional Chain of Radio Experiments Over India

NASA Astrophysics Data System (ADS)

Sripathi, S.; Sreekumar, Sreeba; Banola, S.

2018-05-01

The characteristics of equatorial and low-latitude plasma irregularities are studied using a meridional chain of ionosondes located at Tirunelveli, Hyderabad, and Allahabad and Global Positioning System (GPS) receivers located at Tirunelveli, Mumbai, and Nagpur during the year 2015. The observations suggest that while stronger and longer duration of equatorial spread F irregularities occur in the postsunset sector during equinoxes and winter, they occur mostly in the postmidnight sector during summer, while being weaker in strength and shorter in duration. Further, the postsunset spread F occurs first at the equator followed by their occurrence at low latitudes during equinoxes and winter, while the postmidnight spread F during summer are found to be stronger and earlier at low latitudes followed by their occurrence at the equator. While plasma irregularities are observed by both the ionosondes and GPS receivers during both equinoxes and winter, it is observed mostly by the ionosondes during summer. The results further strengthen the view that while postsunset spread F in equinoxes and winter are generated by the equatorial processes, postmidnight spread F in the summer may be linked to the nonequatorial processes. The results also reemphasize the asymmetric distribution of plasma irregularities or scintillations during equinoxes wherein vernal (autumn) equinox shows more intense plasma irregularities than autumn (vernal) equinox during certain years. Also, using a larger data set of simultaneous GPS and ionosonde observations, the relationship of prereversal enhancement and strength of L-band scintillations with solar flux, Kp index, and equatorial electrojet strength are examined.

The temporal variation of SO2 emissions embodied in Chinese supply chains, 2002-2012.

PubMed

Yang, Xue; Zhang, Wenzhong; Fan, Jie; Li, Jiaming; Meng, Jing

2018-05-24

Whilst attention is increasingly being focused on embodied pollutant emissions along supply chains in China, relatively little attention has been paid to dynamic changes in this process. This study utilized environmental extended input-output analysis (EEIOA) and structural path analysis (SPA) to investigate the dynamic variation of the SO 2 emissions embodied in 28 economic sectors in Chinese supply chains during 2002-2012. The main conclusions are summarized as follows: (1) The dominant SO 2 emission sectors differed under production and consumption perspectives. Electricity and heat production dominated SO 2 emissions from the point of view of production, while construction contributed most from the consumption perspective. (2) The embodied SO 2 emissions tended to change from the path (staring from consumption side to production side): "Services→Services→Power" in 2002 to the path: "Construction and Manufacturing→Metal and Nonmetal→Power" in 2012. (3) Metal-driven emissions raised dramatically from 15% in 2002 to 22% in 2012, due to increasing demand for metal products in construction and manufacturing activities. (4) Power generation was found to result in the greatest volume of production-based emissions, a burden it tended to transfer to upstream sectors in 2012. Controlling construction activities and cutting down end-of-pipe discharges in the process of power generation represent the most radical interventions in reducing Chinese SO 2 emissions. This study shed light on changes in SO 2 emissions in the supply chain, providing a range of policy implications from both production and consumption perspectives. Copyright © 2018 Elsevier Ltd. All rights reserved.

Improving Information Exchange in the Chicken Processing Sector Using Standardised Data Lists

NASA Astrophysics Data System (ADS)

Donnelly, Kathryn Anne-Marie; van der Roest, Joop; Höskuldsson, Stefán Torfi; Olsen, Petter; Karlsen, Kine Mari

Research has shown that to improve electronic communication between companies, universal standardised data lists are necessary. In food supply chains in particular there is an increased need to exchange data in the wake of food safety incidents. Food supply chain companies already record numerous measurements, properties and parameters. These records are necessary for legal reasons, labelling, traceability, profiling desirable characteristics, showing compliance and for meeting customer requirements. Universal standards for name and content of each of these data elements would improve information exchange between buyers, sellers, authorities, consumers and other interested parties. A case study, carried out for the chicken sector, attempted to identify the most relevant parameters including which of these were already communicated to external bodies.

Rethinking health sector procurement as developmental linkages in East Africa.

PubMed

Mackintosh, Maureen; Tibandebage, Paula; Karimi Njeru, Mercy; Kariuki Kungu, Joan; Israel, Caroline; Mujinja, Phares G M

2018-03-01

Health care forms a large economic sector in all countries, and procurement of medicines and other essential commodities necessarily creates economic linkages between a country's health sector and local and international industrial development. These procurement processes may be positive or negative in their effects on populations' access to appropriate treatment and on local industrial development, yet procurement in low and middle income countries (LMICs) remains under-studied: generally analysed, when addressed at all, as a public sector technical and organisational challenge rather than a social and economic element of health system governance shaping its links to the wider economy. This article uses fieldwork in Tanzania and Kenya in 2012-15 to analyse procurement of essential medicines and supplies as a governance process for the health system and its industrial links, drawing on aspects of global value chain theory. We describe procurement work processes as experienced by front line staff in public, faith-based and private sectors, linking these experiences to wholesale funding sources and purchasing practices, and examining their implications for medicines access and for local industrial development within these East African countries. We show that in a context of poor access to reliable medicines, extensive reliance on private medicines purchase, and increasing globalisation of procurement systems, domestic linkages between health and industrial sectors have been weakened, especially in Tanzania. We argue in consequence for a more developmental perspective on health sector procurement design, including closer policy attention to strengthening vertical and horizontal relational working within local health-industry value chains, in the interests of both wider access to treatment and improved industrial development in Africa. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Effectiveness and equity of the Tanzania National Voucher Scheme for mosquito nets over 10 years of implementation.

PubMed

Kramer, Karen; Mandike, Renata; Nathan, Rose; Mohamed, Ally; Lynch, Matthew; Brown, Nick; Mnzava, Ally; Rimisho, Wilhelmina; Lengeler, Christian

2017-06-15

The Tanzania National Voucher Scheme (TNVS) was a public private partnership managed by the Ministry of Health that provided pregnant women and infants with highly subsidized (long-lasting) insecticide-treated nets between 2004 and 2014. It was implemented in the context of the National Insecticide Treated Nets (NATNETS) Programme and was the main keep up strategy for vulnerable populations. The programme design was adjusted considerably over time to incorporate new evidence, shifting public health policies, and changing donor priorities. Three TNVS models can be distinguished: (1) the fixed discount; (2) the fixed top-up; (3) the hybrid voucher model. The changes improved equity and effectiveness, but also had a profound effect on how the programme was managed and implemented. The TNVS reached the majority of beneficiaries with vouchers, and significantly increased household ownership and use of LLINs. While two mass distribution campaigns implemented between 2009 and 2011 achieved universal coverage and equity, the TNVS ensured continuous protection of the vulnerable populations before, during and after the campaigns. The TNVS stimulated and maintained a large national retail network which managed the LLIN supply chain. The effectiveness of the TNVS was a function of several interdependent factors, including the supply chain of vouchers through the public health system; the supply chain of nets in the commercial sector; the demand for nets from voucher recipients; management and risk mitigation measures; and the influence of global and donor objectives. The TNVS was a highly innovative and globally influential programme, which stimulated the thinking around effectively and equitably distributing ITNs, and contributed directly to the evolution of global policy. It was a fundamental component of the NATNETS programme which protected a malaria-vulnerable population for over a decade.

SmartWay

EPA Pesticide Factsheets

SmartWay is an EPA program that helps the freight transportation sector improve supply chain efficiency. SmartWay reduces transportation-related emissions, environmental risks for companies and increases global energy security.

Analysis of supply chain management of shallots in Medan

NASA Astrophysics Data System (ADS)

Alam, M. C.; Supriana, T.

2018-02-01

Supply chain is important for business. One of supply chain that needs to be studied is the shallots supply chain. Medan have high demand while the supply of shallots is limited. This study aims to analyze the flow of shallots supply chain distribution in Medan. The method used was survey by using questionnaires to shallots producers, collecting traders, distributors, traders as well as government involved in shallots supply chain. Descriptive analysis was used to explain the shallots supply chain distribution flow. The results showed that there are two shallots supply chain model in Medan that was local shallots model and imported shallots model. Local shallots model could be distinguished based on three producer area, those were models of Medan Marelan, Samosir, and Simalungun. Medan Marelan and Simalungun models have seven supply chains, while the Samosir Model has eight supply chains. This condition indicates that the local shallots supply chain management in Medan was not efficient because of the length of the distribution channel. Supply chain imported shallots was more efficient because it had a shorter distribution flow with five supply chains.

Seismotectonics of Northeastern Sicily and Southern Calabria (Italy): New constraints on the tectonic structures featuring in a crucial sector for the Central Mediterranean geodynamics

NASA Astrophysics Data System (ADS)

Scarfì, Luciano; Barberi, Graziella; Musumeci, Carla; Patanè, Domenico

2016-04-01

The purpose of this study is to gain a better understanding on the tectonic structures featuring in a crucial sector of central Mediterranean area, including the Aeolian Islands, southern Calabria and northeastern Sicily, where the convergence between Eurasian and African plates has given rise to a complicated collisional/subduction complex. A high quality dataset of about 3000 earthquakes has been exploited for local earthquake tomography and focal mechanisms computation. Results depict undiscovered details of a network of faults which enables the contemporary existence of adjacent compressional and extensional domains. In particular, tomographic images, seismic events distribution and focal mechanisms pinpoint the geometry and activity of a lithospheric-scale tear faults system which, with a NW-SE trend through Sicily and the Tyrrhenian and Ionian Seas, represents the southern edge of the Ionian subduction trench zone. At crustal depth, this tearing is well highlighted by a rotation of the maximum horizontal stress, moving across the area from west toward east. In addition, the shallow normal fault regime, characterising the northeastern Sicily mainland, south of the NW-SE lineament, changes in the deeper part of the crust. Indeed, a NE-SW earthquake distribution, NW gently dipping, and inverse fault solutions indicate a still active contractional deformation in the eastern Sicily, caused by the Africa-Eurasia convergence and well framed with the current compressive regime along the southern Tyrrhenian zone and at the front of the Sicilian Chain-Foreland.

A tiered observational system for anthropogenic methane emissions

NASA Astrophysics Data System (ADS)

Duren, R. M.; Miller, C. E.; Hulley, G. C.; Hook, S. J.; Sander, S. P.

2014-12-01

Improved understanding of anthropogenic methane emissions is required for closing the global carbon budget and addressing priority challenges in climate policy. Several decades of top-down and bottom-up studies show that anthropogenic methane emissions are systematically underestimated in key regions and economic sectors. These uncertainties have been compounded by the dramatic rise of disruptive technologies (e.g., the transformation in the US energy system due to unconventional gas and oil production). Methane flux estimates derived from inverse analyses and aircraft-based mass balance approaches underscore the disagreement in nationally and regionally reported methane emissions as well as the possibility of a long-tail distribution in fugitive emissions spanning the US natural gas supply chain; i.e. a small number of super-emitters may be responsible for most of the observed anomalies. Other studies highlight the challenges of sectoral and spatial attribution of fugitive emissions - including the relative contributions of dairies vs oil and gas production or disentangling the contributions of natural gas transmission, distribution, and consumption or landfill emissions in complex urban environments. Limited observational data remains a foundational barrier to resolving these challenges. We present a tiered observing system strategy for persistent, high-frequency monitoring over large areas to provide remote detection, geolocation and quantification of significant anthropogenic methane emissions across cities, states, basins and continents. We describe how this would both improve confidence in methane emission estimates and expedite resolution of fugitive emissions and leaks. We summarize recent prototype field campaigns that employ multiple vantage points and measurement techniques (including NASA's CARVE and HyTES aircraft and PanFTS instrument on Mt Wilson). We share preliminary results of this tiered observational approach including examples of individual methane point sources associated with oil and gas production and distribution, feedlots, and urban landfills in California.

The Complex Economic System of Supply Chain Financing

NASA Astrophysics Data System (ADS)

Zhang, Lili; Yan, Guangle

Supply Chain Financing (SCF) refers to a series of innovative and complicated financial services based on supply chain. The SCF set-up is a complex system, where the supply chain management and Small and Medium Enterprises (SMEs) financing services interpenetrate systematically. This paper establishes the organization structure of SCF System, and presents two financing models respectively, with or without the participation of the third-party logistic provider (3PL). Using Information Economics and Game Theory, the interrelationship among diverse economic sectors is analyzed, and the economic mechanism of development and existent for SCF system is demonstrated. New thoughts and approaches to solve SMEs financing problem are given.

Transition from the Sector Zone to the Unipolar Zone in the Heliosheath: Voyager 2 Magnetic Field Observations

NASA Technical Reports Server (NTRS)

Burlaga, L. F.; Ness, N. F.

2011-01-01

The magnetic polarity pattern observed by Voyager 2 (V2) evolved with time from a nearly equal mixture of positive and negative polarity sectors in the sector zone from 2007.00 to 2007.67 to nearly uniform positive polarity (magnetic fields directed away from the Sun) in the unipolar zone from 2009.6 to 2010.3. This change was caused by the decreasing latitudinal extent of the sector zone, when the minimum extent of the heliospheric current sheet moved northward toward the solar equator as the solar activity associated with solar cycle 23 decreased a minimum in 2010. In the heliosheath, the distribution of daily averages of the magnetic field strength B was lognormal in the sector zone from 2008.83 to 2009.57 and Gaussian in the unipolar zone from 2009.57 to 2010.27. The distribution of daily increments of B was a Tsallis distribution (q-Gaussian distribution) with q = 1.66 +/- 0.010 in the sector zone and . Gaussian (q = 1.01+/-0.29) in the unipolar zone. The unipolar region appears to be in a relatively undisturbed equilibrium state.

Analysis of labor productivity using large-scale data of firm's financial statements

NASA Astrophysics Data System (ADS)

Ikeda, Y.; Souma, W.; Aoyama, H.; Fujiwara, Y.; Iyetomi, H.

2010-08-01

We investigated labor productivity distribution by analyzing large-scale financial statement data consisting of listed and unlisted Japanese firms to clarify the characteristics of the Japanese labor market. Both high and low productivity sides of the labor productivity distribution follows the power-law distribution. Large inequality in the low productivity side was observed only for the manufacturing sectors in Japan fiscal year (JFY) 1999 and observed for both the manufacturing and non-manufacturing sectors in JFY 2002. The decline in the Japanese GDP in JFY 1999 and JFY 2002 were coincided with the large inequality in the low productivity side of the distribution. A lower peak was found for all non-manufacturing sectors. This might be the origin of the low productivity of the non-manufacturing sectors reported in recent economic studies.

Probability distributions for Markov chain based quantum walks

NASA Astrophysics Data System (ADS)

Balu, Radhakrishnan; Liu, Chaobin; Venegas-Andraca, Salvador E.

2018-01-01

We analyze the probability distributions of the quantum walks induced from Markov chains by Szegedy (2004). The first part of this paper is devoted to the quantum walks induced from finite state Markov chains. It is shown that the probability distribution on the states of the underlying Markov chain is always convergent in the Cesaro sense. In particular, we deduce that the limiting distribution is uniform if the transition matrix is symmetric. In the case of a non-symmetric Markov chain, we exemplify that the limiting distribution of the quantum walk is not necessarily identical with the stationary distribution of the underlying irreducible Markov chain. The Szegedy scheme can be extended to infinite state Markov chains (random walks). In the second part, we formulate the quantum walk induced from a lazy random walk on the line. We then obtain the weak limit of the quantum walk. It is noted that the current quantum walk appears to spread faster than its counterpart-quantum walk on the line driven by the Grover coin discussed in literature. The paper closes with an outlook on possible future directions.

Projected Growth in Small-Scale, Fossil-Fueled Distributed Generation: Potential Implications for the U.S. Greenhouse Gas Inventory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eberle, Annika; Heath, Garvin A

The generation capacity of small-scale (less than one megawatt) fossil-fueled electricity in the United States is anticipated to grow by threefold to twenty-fold from 2015 to 2040. However, in adherence with internationally agreed upon carbon accounting methods, the Environmental Protection Agency's (EPA's) U.S. Greenhouse Inventory (GHGI) does not currently attribute greenhouse gases (GHGs) from these small-scale distributed generation sources to the electric power sector and instead accounts for these emissions in the sector that uses the distributed generation (e.g., the commercial sector). In addition, no other federal electric-sector GHG emission data product produced by the EPA or the U.S. Energymore » Information Administration (EIA) can attribute these emissions to electricity. We reviewed the technical documentation for eight federal electric-sector GHG emission data products, interviewed the data product owners, collected their GHG emission estimates, and analyzed projections for growth in fossil-fueled distributed generation. We show that, by 2040, these small-scale generators could account for at least about 1%- 5% of total CO2 emissions from the U.S. electric power sector. If these emissions fall outside the electric power sector, the United States may not be able to completely and accurately track changes in electricity-related CO2 emissions, which could impact how the country sets GHG reduction targets and allocates mitigation resources. Because small-scale, fossil-fueled distributed generation is expected to grow in other countries as well, the results of this work also have implications for global carbon accounting.« less

Piloting the global subsidy: the impact of subsidized artemisinin-based combination therapies distributed through private drug shops in rural Tanzania.

PubMed

Sabot, Oliver J; Mwita, Alex; Cohen, Justin M; Ipuge, Yahya; Gordon, Megumi; Bishop, David; Odhiambo, Moses; Ward, Lorrayne; Goodman, Catherine

2009-09-02

WHO estimates that only 3% of fever patients use recommended artemisinin-based combination therapies (ACTs), partly reflecting their high prices in the retail sector from where many patients seek treatment. To overcome this challenge, a global ACT subsidy has been proposed. We tested this proposal through a pilot program in rural Tanzania. Three districts were assigned to serve either as a control or to receive the subsidy plus a package of supporting interventions. From October 2007, ACTs were sold at a 90% subsidy through the normal private supply chain to intervention district drug shops. Data were collected at baseline and during intervention using interviews with drug shop customers, retail audits, mystery shoppers, and audits of public and NGO facilities. The proportion of consumers in the intervention districts purchasing ACTs rose from 1% at baseline to 44.2% one year later (p<0.001), and was significantly higher among consumers purchasing for children under 5 than for adults (p = 0.005). No change in ACT usage was observed in the control district. Consumers paid a mean price of $0.58 for ACTs, which did not differ significantly from the price paid for sulphadoxine-pyrimethamine, the most common alternative. Drug shops in population centers were significantly more likely to stock ACTs than those in more remote areas (p<0.001). A subsidy introduced at the top of the private sector supply chain can significantly increase usage of ACTs and reduce their retail price to the level of common monotherapies. Additional interventions may be needed to ensure access to ACTs in remote areas and for poorer individuals who appear to seek treatment at drug shops less frequently. Controlled-Trials.com ISRCTN39125414.

Piloting the Global Subsidy: The Impact of Subsidized Artemisinin-Based Combination Therapies Distributed through Private Drug Shops in Rural Tanzania

PubMed Central

Sabot, Oliver J.; Mwita, Alex; Cohen, Justin M.; Ipuge, Yahya; Gordon, Megumi; Bishop, David; Odhiambo, Moses; Ward, Lorrayne; Goodman, Catherine

2009-01-01

Background WHO estimates that only 3% of fever patients use recommended artemisinin-based combination therapies (ACTs), partly reflecting their high prices in the retail sector from where many patients seek treatment. To overcome this challenge, a global ACT subsidy has been proposed. We tested this proposal through a pilot program in rural Tanzania. Methods/Principal Findings Three districts were assigned to serve either as a control or to receive the subsidy plus a package of supporting interventions. From October 2007, ACTs were sold at a 90% subsidy through the normal private supply chain to intervention district drug shops. Data were collected at baseline and during intervention using interviews with drug shop customers, retail audits, mystery shoppers, and audits of public and NGO facilities. The proportion of consumers in the intervention districts purchasing ACTs rose from 1% at baseline to 44.2% one year later (p<0.001), and was significantly higher among consumers purchasing for children under 5 than for adults (p = 0.005). No change in ACT usage was observed in the control district. Consumers paid a mean price of $0.58 for ACTs, which did not differ significantly from the price paid for sulphadoxine-pyrimethamine, the most common alternative. Drug shops in population centers were significantly more likely to stock ACTs than those in more remote areas (p<0.001). Conclusions A subsidy introduced at the top of the private sector supply chain can significantly increase usage of ACTs and reduce their retail price to the level of common monotherapies. Additional interventions may be needed to ensure access to ACTs in remote areas and for poorer individuals who appear to seek treatment at drug shops less frequently. Trial Registration Controlled-Trials.com ISRCTN39125414. PMID:19724644

The Distribution of Student Financial Aid: Trends among the Postsecondary Sectors.

ERIC Educational Resources Information Center

Lee, John B.

The distribution of student aid among the five sectors of postsecondary education is examined: proprietary schools, two-year public colleges, four-year public colleges and universities, two-year nonprofit private colleges, and four-year nonprofit private colleges and universities. Attention is also directed to the ways this aid distribution has…

Evaluating Drug Prices, Availability, Affordability, and Price Components: Implications for Access to Drugs in Malaysia

PubMed Central

Babar, Zaheer Ud Din; Ibrahim, Mohamed Izham Mohamed; Singh, Harpal; Bukahri, Nadeem Irfan; Creese, Andrew

2007-01-01

Background Malaysia's stable health care system is facing challenges with increasing medicine costs. To investigate these issues a survey was carried out to evaluate medicine prices, availability, affordability, and the structure of price components. Methods and Findings The methodology developed by the World Health Organization (WHO) and Health Action International (HAI) was used. Price and availability data for 48 medicines was collected from 20 public sector facilities, 32 private sector retail pharmacies and 20 dispensing doctors in four geographical regions of West Malaysia. Medicine prices were compared with international reference prices (IRPs) to obtain a median price ratio. The daily wage of the lowest paid unskilled government worker was used to gauge the affordability of medicines. Price component data were collected throughout the supply chain, and markups, taxes, and other distribution costs were identified. In private pharmacies, innovator brand (IB) prices were 16 times higher than the IRPs, while generics were 6.6 times higher. In dispensing doctor clinics, the figures were 15 times higher for innovator brands and 7.5 for generics. Dispensing doctors applied high markups of 50%–76% for IBs, and up to 316% for generics. Retail pharmacy markups were also high—25%–38% and 100%–140% for IBs and generics, respectively. In the public sector, where medicines are free, availability was low even for medicines on the National Essential Drugs List. For a month's treatment for peptic ulcer disease and hypertension people have to pay about a week's wages in the private sector. Conclusions The free market by definition does not control medicine prices, necessitating price monitoring and control mechanisms. Markups for generic products are greater than for IBs. Reducing the base price without controlling markups may increase profits for retailers and dispensing doctors without reducing the price paid by end users. To increase access and affordability, promotion of generic medicines and improved availability of medicines in the public sector are required. PMID:17388660

Evaluating drug prices, availability, affordability, and price components: implications for access to drugs in Malaysia.

PubMed

Babar, Zaheer Ud Din; Ibrahim, Mohamed Izham Mohamed; Singh, Harpal; Bukahri, Nadeem Irfan; Creese, Andrew

2007-03-27

Malaysia's stable health care system is facing challenges with increasing medicine costs. To investigate these issues a survey was carried out to evaluate medicine prices, availability, affordability, and the structure of price components. The methodology developed by the World Health Organization (WHO) and Health Action International (HAI) was used. Price and availability data for 48 medicines was collected from 20 public sector facilities, 32 private sector retail pharmacies and 20 dispensing doctors in four geographical regions of West Malaysia. Medicine prices were compared with international reference prices (IRPs) to obtain a median price ratio. The daily wage of the lowest paid unskilled government worker was used to gauge the affordability of medicines. Price component data were collected throughout the supply chain, and markups, taxes, and other distribution costs were identified. In private pharmacies, innovator brand (IB) prices were 16 times higher than the IRPs, while generics were 6.6 times higher. In dispensing doctor clinics, the figures were 15 times higher for innovator brands and 7.5 for generics. Dispensing doctors applied high markups of 50%-76% for IBs, and up to 316% for generics. Retail pharmacy markups were also high-25%-38% and 100%-140% for IBs and generics, respectively. In the public sector, where medicines are free, availability was low even for medicines on the National Essential Drugs List. For a month's treatment for peptic ulcer disease and hypertension people have to pay about a week's wages in the private sector. The free market by definition does not control medicine prices, necessitating price monitoring and control mechanisms. Markups for generic products are greater than for IBs. Reducing the base price without controlling markups may increase profits for retailers and dispensing doctors without reducing the price paid by end users. To increase access and affordability, promotion of generic medicines and improved availability of medicines in the public sector are required.

Access to artemisinin-based combination therapies and other anti-malarial drugs in Kinshasa.

PubMed

Nkoli Mandoko, P; Sinou, V; Moke Mbongi, D; Ngoyi Mumba, D; Kahunu Mesia, G; Losimba Likwela, J; Bi Shamamba Karhemere, S; Muepu Tshilolo, L; Tamfum Muyembe, J-J; Parzy, D

2018-06-01

Artemisinin-based combination therapies have been available since 2005 in the Democratic Republic of the Congo to treat malaria and to overcome the challenge of anti-malarial drug resistance as well as to improve access to effective treatments. The private sector is the primary distribution source for anti-malarial drugs and thus, has a key position among the supply chain actors for a rational and proper use of anti-malarial drugs. We aimed to assess access to nationally recommended anti-malarial drugs in private sector pharmacies of the capital-city of Kinshasa. We performed a cross-sectional survey of 404 pharmacies. Anti-malarial drugs were stocked in all surveyed pharmacies. Non-artemisinin-based anti-malarial therapies such as quinine or sulfadoxine-pyrimethamine, were the most frequently stocked drugs (93.8% of pharmacies). Artemisinin-based combination therapies were stocked in 88% of pharmacies. Artemether-lumefantrine combinations were the most frequently dispensed drugs (93% of pharmacies), but less than 3% were quality-assured products. Other non-officially recommended artemisinin-based therapies including oral monotherapies were widely available. Artemisinin-based combination therapies were widely available in the private pharmacies of Kinshasa. However, the private sector does not guarantee the use of nationally recommended anti-malarial drugs nor does it give priority to quality-assured anti-malarial drugs. These practices contribute to the risk of emergence and spread of resistance to anti-malarial drugs and to increasing treatment costs. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

A Review of Sustainability Enhancements in the Beef Value Chain: State-of-the-Art and Recommendations for Future Improvements

PubMed Central

Maia de Souza, Danielle; Petre, Ruaraidh; Jackson, Fawn; Hadarits, Monica; Pogue, Sarah; Carlyle, Cameron N.; Bork, Edward; McAllister, Tim

2017-01-01

Simple Summary To better address consumer concerns, the beef sector is working on strategies to enhance the sustainability of all aspects of the beef supply chain. Among these strategies are (1) the development of science-based frameworks and indicators capable of measuring progress at all stages of beef production; (2) the engagement of different stakeholders along the beef supply chain at regional and global levels; and (3) the improvement of communication among stakeholders and transparency towards consumers. Progress on these three fronts was presented during the 2nd Global Conference on Sustainable Beef, hosted by the Global and Canadian Roundtables for Sustainable Beef. During the event, there was a clear understanding that the beef industry is substantially advancing efforts to continuously improve its sustainability, both at regional and global levels, by developing assessment frameworks and indicators to measure progress. However, it is also clear that the beef sector has a need to more clearly define the concept of beef sustainability, strengthen cooperation and exchange of information among national roundtables for sustainable beef, as well as improve the flow of information along the supply chain. An improved transparency in the beef sector will help consumers make more informed decisions about food products. Abstract The beef sector is working towards continually improving its sustainability in order to achieve environmentally, socially and economically desirable outcomes, all of which are of increasing concern to consumers. In this context, the Global Roundtable for Sustainable Beef (GRSB) provides guidance to advance the sustainability of the beef industry, through increased stakeholder engagement and the formation of national roundtables. Recently, the 2nd Global Conference on Sustainable Beef took place in Banff, Alberta, Canada, hosted by the GRSB and the Canadian Roundtable for Sustainable Beef. Conference attendees discussed the various initiatives that are being developed to address aspects of beef sustainability. This paper reviews the main discussions that occurred during this event, along with the key lessons learned, messages, and strategies that were proposed to improve the sustainability of the global beef industry. PMID:28327500

Food waste in the Swiss food service industry - Magnitude and potential for reduction.

PubMed

Betz, Alexandra; Buchli, Jürg; Göbel, Christine; Müller, Claudia

2015-01-01

Food losses occur across the whole food supply chain. They have negative effects on the economy and the environment, and they are not justifiable from an ethical point of view. The food service industry was identified by Beretta et al. (2013) as the third largest source of food waste based on food input at each stage of the value added chain. The total losses are estimated 18% of the food input, the avoidable losses 13.5%. However, these estimations are related with considerable uncertainty. To get more reliable and detailed data of food losses in this sector, the waste from two companies (in the education and business sectors) was classified into four categories (storage losses, preparation losses, serving losses, and plate waste) and seven food classes and measured for a period of five days. A questionnaire evaluated customer reaction, and a material flow analysis was used to describe the mass and monetary losses within the process chain. The study found that in company A (education sector) 10.73% and in company B (business sector) 7.69% of the mass of all food delivered was wasted during the process chain. From this, 91.98% of the waste in company A and 78.14% in company B were classified as avoidable. The highest proportion of waste occurred from serving losses with starch accompaniments and vegetables being the most frequently wasted items. The quantities of waste per meal were 91.23 g (value CHF 0.74) and 85.86 g (value CHF 0.44) for company A and company B, respectively. The annual loss averaged 10.47 tonnes (value CHF 85,047) in company A and 16.55 tonnes (value CHF 85,169) in company B. The customer survey showed that 15.79% (n=356) of the respondents in company A and 18.32% (n=382) in company B produced plate waste. The main causes of plate waste cited were 'portion served by staff too large' and 'lack of hunger'. Sustainable measures need to be implemented in the food service industry to reduce food waste and to improve efficiency. Copyright © 2014 Elsevier Ltd. All rights reserved.

Innovation: Attracting and Retaining the Best of the Private Sector

DTIC Science & Technology

2014-01-01

The recommendations seek to open up Innovation: Attracting and Retaining the the Best of the Private Sector Task Group 6 Report FY14-02 what is a...industry structure changes, the Task Group recommends the following: • Require the adoption of an open architecture, modular approach to new mission...essential platforms; and • Take steps to open a closed supply chain; re-examine industry structure and encourage new entrants. With regard to messaging

Comparative cost models of a liquid nitrogen vapor phase (LNVP) cold chain-distributed cryopreserved malaria vaccine vs. a conventional vaccine

PubMed Central

Garcia, Cristina Reyes; Manzi, Fatuma; Tediosi, Fabrizio; Hoffman, Stephen L.; James, Eric R.

2013-01-01

Typically, vaccines distributed through the Expanded Program on Immunization (EPI) use a 2–8 °C cold chain with 4–5 stops. The PfSPZ Vaccine comprises whole live-attenuated cryopreserved sporozoites stored in liquid nitrogen (LN2) vapor phase (LNVP) below −140 °C and would be distributed through a LNVP cold chain. The purpose of this study was to model LNVP cold chain distribution for the cryopreserved PfSPZ Vaccine in Tanzania, estimate the costs and compare these costs to those that would be incurred in distributing a ‘conventional’ malaria vaccine through the EPI. Capital and recurrent costs for storage, transportation, labor, energy usage and facilities were determined for the birth cohort in Tanzania over five years. Costs were calculated using WHO/UNESCO calculators. These were applied to a 2–8 °C distribution model with national, regional, district, and health facility levels, and for the cryopreserved vaccine using a ‘modified hub-and-spoke’ (MH-S) LNVP distribution system comprising a central national store, peripheral health facilities and an intermediate district-level transhipment stop. Estimated costs per fully immunized child (FIC) were $ 6.11 for the LNVP-distributed cryopreserved vaccine where the LN2 is generated, and $ 6.04 with purchased LN2 (assuming US $ 1.00/L). The FIC costs for distributing a conventional vaccine using the four level 2–8 °C cold chain were $ 6.10, and with a tariff distribution system as occurs in Tanzania the FIC cost was $ 5.53. The models, therefore, predicted little difference in 5-year distribution costs between the PfSPZ Vaccine distributed through a MH-S LNVP cold chain and a conventional vaccine distributed through the more traditional EPI system. A LNVP cold chain provides additional benefits through the use of durable dry shippers because no refrigerators, freezers or refrigerated trucks are required. Thus strain at the cold chain periphery, vaccine wastage from cold chain failures and the environmental impact of distribution would all be reduced. PMID:23146676

Comparative cost models of a liquid nitrogen vapor phase (LNVP) cold chain-distributed cryopreserved malaria vaccine vs. a conventional vaccine.

PubMed

Garcia, Cristina Reyes; Manzi, Fatuma; Tediosi, Fabrizio; Hoffman, Stephen L; James, Eric R

2013-01-02

Typically, vaccines distributed through the Expanded Program on Immunization (EPI) use a 2-8°C cold chain with 4-5 stops. The PfSPZ Vaccine comprises whole live-attenuated cryopreserved sporozoites stored in liquid nitrogen (LN(2)) vapor phase (LNVP) below -140°C and would be distributed through a LNVP cold chain. The purpose of this study was to model LNVP cold chain distribution for the cryopreserved PfSPZ Vaccine in Tanzania, estimate the costs and compare these costs to those that would be incurred in distributing a 'conventional' malaria vaccine through the EPI. Capital and recurrent costs for storage, transportation, labor, energy usage and facilities were determined for the birth cohort in Tanzania over five years. Costs were calculated using WHO/UNESCO calculators. These were applied to a 2-8°C distribution model with national, regional, district, and health facility levels, and for the cryopreserved vaccine using a 'modified hub-and-spoke' (MH-S) LNVP distribution system comprising a central national store, peripheral health facilities and an intermediate district-level transhipment stop. Estimated costs per fully immunized child (FIC) were $ 6.11 for the LNVP-distributed cryopreserved vaccine where the LN(2) is generated, and $ 6.04 with purchased LN(2) (assuming US $ 1.00/L). The FIC costs for distributing a conventional vaccine using the four level 2-8°C cold chain were $ 6.10, and with a tariff distribution system as occurs in Tanzania the FIC cost was $ 5.53. The models, therefore, predicted little difference in 5-year distribution costs between the PfSPZ Vaccine distributed through a MH-S LNVP cold chain and a conventional vaccine distributed through the more traditional EPI system. A LNVP cold chain provides additional benefits through the use of durable dry shippers because no refrigerators, freezers or refrigerated trucks are required. Thus strain at the cold chain periphery, vaccine wastage from cold chain failures and the environmental impact of distribution would all be reduced. Copyright © 2012 Elsevier Ltd. All rights reserved.

Dynamically Evolving Sectors for Convective Weather Impact

NASA Technical Reports Server (NTRS)

Drew, Michael C.

2010-01-01

A new strategy for altering existing sector boundaries in response to blocking convective weather is presented. This method seeks to improve the reduced capacity of sectors directly affected by weather by moving boundaries in a direction that offers the greatest capacity improvement. The boundary deformations are shared by neighboring sectors within the region in a manner that preserves their shapes and sizes as much as possible. This reduces the controller workload involved with learning new sector designs. The algorithm that produces the altered sectors is based on a force-deflection mesh model that needs only nominal traffic patterns and the shape of the blocking weather for input. It does not require weather-affected traffic patterns that would have to be predicted by simulation. When compared to an existing optimal sector design method, the sectors produced by the new algorithm are more similar to the original sector shapes, resulting in sectors that may be more suitable for operational use because the change is not as drastic. Also, preliminary results show that this method produces sectors that can equitably distribute the workload of rerouted weather-affected traffic throughout the region where inclement weather is present. This is demonstrated by sector aircraft count distributions of simulated traffic in weather-affected regions.

Implementation of a real option in a sustainable supply chain: an empirical study of alkaline battery recycling

NASA Astrophysics Data System (ADS)

Cucchiella, Federica; D'Adamo, Idiano; Gastaldi, Massimo; Lenny Koh, S. C.

2014-06-01

Green supply chain management (GSCM) has emerged as a key approach for enterprises seeking to become environmentally sustainable. This paper aims to evaluate and describe the advantages of a GSCM approach by analysing practices and performance consequences in the battery recycling sector. It seeks to integrate works in supply chain management (SCM), environmental management, performance management and real option (RO) theory into one framework. In particular, life cycle assessment (LCA) is applied to evaluate the environmental impact of a battery recycling plant project, and life cycle costing (LCC) is applied to evaluate its economic impact. Firms, also understanding the relevance of GSCM, have often avoided applying the green principles because of the elevated costs that such management involved. Such costs could also seem superior to the potential advantages since standard performance measurement systems are internally and business focused; for these reasons, we consider all the possible value deriving also by uncertainty associated to a green project using the RO theory. This work is one of the few and pioneering efforts to investigate GSCM practices in the battery recycling sector.

Understanding and addressing contraceptive stockouts to increase family planning access and uptake in Senegal.

PubMed

Hasselback, Leah; Dicko, Modibo; Viadro, Claire; Ndour, Soussaba; Ndao, Oumy; Wesson, Jennifer

2017-05-26

Senegal's government has pledged to reduce contraceptive stockouts, which have been frequent in public sector health facilities. An innovative distribution system called the Informed Push Model (IPM) addresses supply chain obstacles through direct regional-to-facility delivery of contraceptives and use of private sector logistics operators. Following promising pilot results, Senegal's Ministry of Health and Social Action committed to a three-year (2013-2016) expansion of IPM to all public health facilities nationwide. From August 2014-July 2016, IPM's six logisticians made 29,319 visits to restock public sector health facilities. During these regular facility visits, the logisticians conducted a physical inventory to flag contraceptive stockouts (no usable stock of any single method available) and asked facility staff to identify the primary reason for documented stockouts. Our descriptive study examines stockout trends over the course of IPM scale-up. We also describe trends in contraceptive consumption over the three-year period using facility-level data collected by the logisticians. Contraceptive consumption rose by 91% over 35 months in the first three IPM regions, and by 118% in the next five regions (over 26 months). After scale-up to 1,394 health facilities, nationwide consumption rose by 48% over one year. On average, logisticians documented stockouts at fewer than 2% of facility visits. In comparison, two pre-IPM studies in 2011 identified stockouts of selected modern contraceptives at 60-70% of facilities visited, with 84% of clients reporting stockouts in the past year. Six factors (including consumption spikes, IPM-preventable causes, and community outreach) explained most remaining stockouts. IPM has been highly successful in ensuring full availability of contraceptives across regions and health facilities. The model also has facilitated the flow of essential data on consumption and stockouts from facilities up to district, regional, and central-level managers. These achievements highlight the relevance of professionalizing supply chain management while continuing to mitigate stockouts through enhanced stakeholder communication and improved training, coaching, and supervision of third-party logistics operators. Supply reliability is critical in shaping demand for and regular use of contraception. The government is transitioning the IPM to full management by the National Supply Pharmacy.

Notification: Evaluation of EPA Actions to Reduce Methane Distribution Sector Leaks

EPA Pesticide Factsheets

Project #OPE-FY13-0016, June 3, 2013. The OIG plans to begin the preliminary research phase of an evaluation of the EPA's efforts to reduce methane leaks from pipelines in the natural gas distribution sector.

Distribution and Supply Chain Management: Educating the Army Officer

DTIC Science & Technology

2005-05-26

knowledge a logistics officer must have to function effectively in a supply chain and distribution management environment. It analyzes how officers...Educational Objectives. It discusses how the Army/DoD currently teaches supply chain and distribution management concepts in various programs, such as the...its educational curriculum, and that logisticians continue to gain operational experience in distribution management operations. The paper recommends

Food safety - the roles and responsibilities of different sectors

NASA Astrophysics Data System (ADS)

Karabasil, N.; Bošković, T.; Dimitrijević, M.; Vasilev, D.; Đorđević, V.; Lakićević, B.; Teodorović, V.

2017-09-01

Serbia is a relatively small country but with a long tradition in food production, especially meat and meat products. Serbia, as part of its open negotiation process as a candidate country with the European Union (EU), started to harmonise its legislation with the EU, and has published a set of laws and regulations relating to the hygiene of food production and food safety, the official control of production and the welfare of animals. Therefore, the food safety system in Serbia is based on principles established in the EU. There is a need for cooperation of different sectors (government, food business operators and consumers) in the management of food safety, and every sector has its role and responsibility. This paper aims to provide analytical support for the process of upgrading safety and quality in Serbia’s food sector and explains the roles and responsibilities of different sectors in the food chain.

Using the base-of-the-pyramid perspective to catalyze interdependence-based collaborations

PubMed Central

London, Ted; Anupindi, Ravi

2012-01-01

Improving food security and nutrition in the developing world remains among society's most intractable challenges and continues despite a wide variety of investments. Both donor- and enterprise-led initiatives, for example, have explored including smallholder farmers in their value chains. However, these efforts have had only modest success, partly because the private and development sectors prefer to maintain their independence. Research from the base-of-the-pyramid domain offers new insights into how collaborative interdependence between sectors can enhance the connection between profits and the alleviation of poverty. In this article, we identify the strengths and weaknesses of donor-led and enterprise-led value chain initiatives. We then explore how insights from the base-of-the-pyramid domain yield a set of interdependence-based collaboration strategies that can achieve more sustainable and scalable outcomes. PMID:21482752

How to Increase Value in the Footwear Supply Chain

NASA Astrophysics Data System (ADS)

Fornasiero, Rosanna; Tescaro, Mauro; Scarso, Enrico; Gottardi, Giorgio

The Lean approach has been implemented in many different sectors as a methodology to improve industrial performance at company level. In the latest years this approach has been further developed in literature and in practice to integrate the principles of agility, adaptability and the mass customization paradigm where product and services have to be designed together to meet specific requirements, and where value originated by the supply chain enhance the value of single company thanks to the use of ICT and remote control. In this paper we analyze the Beyond-Lean paradigm and propose a path for companies in the footwear sector to improve their performance based on high-value-added products and processes. A detailed process analysis based on Value Stream Mapping is used to define criticalities and suggest improvements paths both at technological and organizational level.

Using the base-of-the-pyramid perspective to catalyze interdependence-based collaborations.

PubMed

London, Ted; Anupindi, Ravi

2012-07-31

Improving food security and nutrition in the developing world remains among society's most intractable challenges and continues despite a wide variety of investments. Both donor- and enterprise-led initiatives, for example, have explored including smallholder farmers in their value chains. However, these efforts have had only modest success, partly because the private and development sectors prefer to maintain their independence. Research from the base-of-the-pyramid domain offers new insights into how collaborative interdependence between sectors can enhance the connection between profits and the alleviation of poverty. In this article, we identify the strengths and weaknesses of donor-led and enterprise-led value chain initiatives. We then explore how insights from the base-of-the-pyramid domain yield a set of interdependence-based collaboration strategies that can achieve more sustainable and scalable outcomes.

Initiatives and outcomes of green supply chain management implementation by Chinese manufacturers.

PubMed

Zhu, Qinghua; Sarkis, Joseph; Lai, Kee-hung

2007-10-01

This paper aims to explore the green supply chain management (GSCM) initiatives (implementation) of various manufacturing industrial sectors in China and examine the links between GSCM initiatives and performance outcomes. We conducted a survey to collect data from four typical manufacturing industrial sectors in China, namely, power generating, chemical/petroleum, electrical/electronic and automobile, and received 171 valid organizational responses for data analysis. Analysis of variance (ANOVA) was used to analyze the data. The results are consistent with our prediction that the different manufacturing industry types display different levels of GSCM implementation and outcomes. We specifically found that the electrical/electronic industry has relatively higher levels of GSCM implementation and achieves better performance outcomes than the other three manufacturer types. Implications of the results are discussed and suggestions for further research on the implementation of GSCM are offered.

Cost-effective practices in the blood service sector.

PubMed

Katsaliaki, Korina

2008-05-01

The objective of this study is to recommend alternative policies, which are tested on a computer simulation model, towards a more cost-effective management of the blood supply chain in the UK. With the use of primary and secondary data from the National Blood Service (NBS) and the supplied hospitals, statistical analysis is conducted and a detailed discrete event simulation model of a vertical part of the UK supply chain of blood products is developed to test and identify good ordering, inventory and distribution practices. Fewer outdates, group substitutions, shortages and deliveries could be achieved by blood banks: holding stock of rare blood groups of red blood cells (RBC), having a second routine delivery per weekday, exercising a more insensitive ordering point for RBC, reducing the total crossmatch release period to less than 1.5 days, increasing the transfusion-to-crossmatch ratio to 70%, adhering to an age-based issuing of orders, holding RBC stock of a weighted average of approximately 4 days. The blood supply simulation model can offer useful pieces of advice to the stakeholders of the examined system which leads to cost reductions and increased safety. Moreover, it provides a great range of experimental capabilities in a risk-free environment.

Structural Path Analysis of Fossil Fuel Based CO2 Emissions: A Case Study for China.

PubMed

Yang, Zhiyong; Dong, Wenjie; Xiu, Jinfeng; Dai, Rufeng; Chou, Jieming

2015-01-01

Environmentally extended input-output analysis (EEIOA) has long been used to quantify global and regional environmental impacts and to clarify emission transfers. Structural path analysis (SPA), a technique based on EEIOA, is especially useful for measuring significant flows in this environmental-economic system. This paper constructs an imports-adjusted single-region input-output (SRIO) model considering only domestic final use elements, and it uses the SPA technique to highlight crucial routes along the production chain in both final use and sectoral perspectives. The results indicate that future mitigation policies on household consumption should change direct energy use structures in rural areas, cut unreasonable demand for power and chemical products, and focus on urban areas due to their consistently higher magnitudes than rural areas in the structural routes. Impacts originating from government spending should be tackled by managing onsite energy use in 3 major service sectors and promoting cleaner fuels and energy-saving techniques in the transport sector. Policies on investment should concentrate on sectoral interrelationships along the production chain by setting up standards to regulate upstream industries, especially for the services, construction and equipment manufacturing sectors, which have high demand pulling effects. Apart from the similar methods above, mitigating policies in exports should also consider improving embodied technology and quality in manufactured products to achieve sustainable development. Additionally, detailed sectoral results in the coal extraction industry highlight the onsite energy use management in large domestic companies, emphasize energy structure rearrangement, and indicate resources and energy safety issues. Conclusions based on the construction and public administration sectors reveal that future mitigation in secondary and tertiary industries should be combined with upstream emission intensive industries in a systematic viewpoint to achieve sustainable development. Overall, SPA is a useful tool in empirical studies, and it can be used to analyze national environmental impacts and guide future mitigation policies.

Structural Path Analysis of Fossil Fuel Based CO2 Emissions: A Case Study for China

PubMed Central

Yang, Zhiyong; Dong, Wenjie; Xiu, Jinfeng; Dai, Rufeng; Chou, Jieming

2015-01-01

Environmentally extended input-output analysis (EEIOA) has long been used to quantify global and regional environmental impacts and to clarify emission transfers. Structural path analysis (SPA), a technique based on EEIOA, is especially useful for measuring significant flows in this environmental-economic system. This paper constructs an imports-adjusted single-region input-output (SRIO) model considering only domestic final use elements, and it uses the SPA technique to highlight crucial routes along the production chain in both final use and sectoral perspectives. The results indicate that future mitigation policies on household consumption should change direct energy use structures in rural areas, cut unreasonable demand for power and chemical products, and focus on urban areas due to their consistently higher magnitudes than rural areas in the structural routes. Impacts originating from government spending should be tackled by managing onsite energy use in 3 major service sectors and promoting cleaner fuels and energy-saving techniques in the transport sector. Policies on investment should concentrate on sectoral interrelationships along the production chain by setting up standards to regulate upstream industries, especially for the services, construction and equipment manufacturing sectors, which have high demand pulling effects. Apart from the similar methods above, mitigating policies in exports should also consider improving embodied technology and quality in manufactured products to achieve sustainable development. Additionally, detailed sectoral results in the coal extraction industry highlight the onsite energy use management in large domestic companies, emphasize energy structure rearrangement, and indicate resources and energy safety issues. Conclusions based on the construction and public administration sectors reveal that future mitigation in secondary and tertiary industries should be combined with upstream emission intensive industries in a systematic viewpoint to achieve sustainable development. Overall, SPA is a useful tool in empirical studies, and it can be used to analyze national environmental impacts and guide future mitigation policies. PMID:26332222

Crustal Strain Patterns in Magmatic and Amagmatic Early Stage Rifts: Border Faults, Magma Intrusion, and Volatiles

NASA Astrophysics Data System (ADS)

Ebinger, C. J.; Keir, D.; Roecker, S. W.; Tiberi, C.; Aman, M.; Weinstein, A.; Lambert, C.; Drooff, C.; Oliva, S. J. C.; Peterson, K.; Bourke, J. R.; Rodzianko, A.; Gallacher, R. J.; Lavayssiere, A.; Shillington, D. J.; Khalfan, M.; Mulibo, G. D.; Ferdinand-Wambura, R.; Palardy, A.; Albaric, J.; Gautier, S.; Muirhead, J.; Lee, H.

2015-12-01

Rift initiation in thick, strong continental lithosphere challenges current models of continental lithospheric deformation, in part owing to gaps in our knowledge of strain patterns in the lower crust. New geophysical, geochemical, and structural data sets from youthful magmatic (Magadi-Natron, Kivu), weakly magmatic (Malawi, Manyara), and amagmatic (Tanganyika) sectors of the cratonic East African rift system provide new insights into the distribution of brittle strain, magma intrusion and storage, and time-averaged deformation. We compare and contrast time-space relations, seismogenic layer thickness variations, and fault kinematics using earthquakes recorded on local arrays and teleseisms in sectors of the Western and Eastern rifts, including the Natron-Manyara basins that developed in Archaean lithosphere. Lower crustal seismicity occurs in both the Western and Eastern rifts, including sectors on and off craton, and those with and without central rift volcanoes. In amagmatic sectors, lower crustal strain is accommodated by slip along relatively steep border faults, with oblique-slip faults linking opposing border faults that penetrate to different crustal levels. In magmatic sectors, seismicity spans surface to lower crust beneath both border faults and eruptive centers, with earthquake swarms around magma bodies. Our focal mechanisms and Global CMTs from a 2007 fault-dike episode show a local rotation from ~E-W extension to NE-SE extension in this linkage zone, consistent with time-averaged strain recorded in vent and eruptive chain alignments. These patterns suggest that strain localization via widespread magma intrusion can occur during the first 5 My of rifting in originally thick lithosphere. Lower crustal seismicity in magmatic sectors may be caused by high gas pressures and volatile migration from active metasomatism and magma degassing, consistent with high CO2 flux along fault zones, and widespread metasomatism of xenoliths. Volatile release and migration may be critical to strength reduction of initially cold, strong cratonic lithosphere. Our comparisons suggest that large offset border faults that develop very early in rift history create fluid pathways that maintain the initial along-axis segmentation until magma (if available), reaches mid-crustal levels.

Transition from the Unipolar Region to the Sector Zone: Voyager 2, 2013 and 2014

NASA Astrophysics Data System (ADS)

Burlaga, L. F.; Ness, N. F.; Richardson, J. D.

2017-05-01

We discuss magnetic field and plasma observations of the heliosheath made by Voyager 2 (V2) during 2013 and 2014 near solar maximum. A transition from a unipolar region to a sector zone was observed in the azimuthal angle λ between ˜2012.45 and 2013.82. The distribution of λ was strongly singly peaked at 270^\\circ in the unipolar region and double peaked in the sector zone. The δ-distribution was strongly peaked in the unipolar region and very broad in the sector zone. The distribution of daily averages of the magnetic field strength B was Gaussian in the unipolar region and lognormal in the sector zone. The correlation function of B was exponential with an e-folding time of ˜5 days in both regions. The distribution of hourly increments of B was a Tsallis distribution with nonextensivity parameter q = 1.7 ± 0.04 in the unipolar region and q = 1.44 ± 0.12 in the sector zone. The CR-B relationship qualitatively describes the 2013 observations, but not the 2014 observations. A 40 km s-1 increase in the bulk speed associated with an increase in B near 2013.5 might have been produced by the merging of streams. A “D sheet” (a broad depression in B containing a current sheet moved past V2 from days 320 to 345, 2013. The R- and N-components of the plasma velocity changed across the current sheet.

Predictors of chain acquisition among independent dialysis facilities.

PubMed

Pozniak, Alyssa S; Hirth, Richard A; Banaszak-Holl, Jane; Wheeler, John R C

2010-04-01

To determine the predictors of chain acquisition among independent dialysis providers. Retrospective facility-level data combined from CMS Cost Reports, Medical Evidence Forms, Annual Facility Surveys, and claims for 1996-2003. Independent dialysis facilities' probability of acquisition by a dialysis chain (overall and by chain size) was estimated using a discrete time hazard rate model, controlling for financial and clinical performance, practice patterns, market factors, and other facility characteristics. The sample includes all U.S. freestanding dialysis facilities that report not being chain affiliated for at least 1 year between 1997 and 2003. Above-average costs and better quality outcomes are significant determinants of dialysis chain acquisition. Facilities in larger markets were more likely to be acquired by a chain. Furthermore, small dialysis chains have different acquisition strategies than large chains. Dialysis chains appear to employ a mix of turn-around and cream-skimming strategies. Poor financial health is a predictor of chain acquisition as in other health care sectors, but the increased likelihood of chain acquisition among higher quality facilities is unique to the dialysis industry. Significant differences among predictors of acquisition by small and large chains reinforce the importance of using a richer classification for chain status.

String limit of the isotropic Heisenberg chain in the four-particle sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antipov, A. G., E-mail: aga2@csa.ru; Komarov, I. V., E-mail: ivkoma@rambler.r

2008-05-15

The quantum method of variable separation is applied to the spectral problem of the isotropic Heisenberg model. The Baxter difference equation is resolved by means of a special quasiclassical asymptotic expansion. States are identified by multiplicities of limiting values of the Bethe parameters. The string limit of the four-particle sector is investigated. String solutions are singled out and classified. It is shown that only a minor fraction of solutions demonstrate string behavior.

Community Campaigns, Supply Chains, and Protecting the Health and Well-Being of Workers

PubMed Central

Quinlan, Michael

2009-01-01

The growth of contingent work (also known as precarious employment), the informal sector, and business practices that diffuse employer responsibility for worker health and safety (such as outsourcing and the development of extended national and international contracting networks [supply chains]) pose a serious threat to occupational health and safety that disproportionately affects low-wage, ethnic minority, and immigrant workers. Drawing on cases from the United States and Australia, we examine the role that community-based campaigns can play in meeting these challenges, including several successful campaigns that incorporate supply chain regulation. PMID:19890154

Community campaigns, supply chains, and protecting the health and well-being of workers.

PubMed

Quinlan, Michael; Sokas, Rosemary K

2009-11-01

The growth of contingent work (also known as precarious employment), the informal sector, and business practices that diffuse employer responsibility for worker health and safety (such as outsourcing and the development of extended national and international contracting networks [supply chains]) pose a serious threat to occupational health and safety that disproportionately affects low-wage, ethnic minority, and immigrant workers. Drawing on cases from the United States and Australia, we examine the role that community-based campaigns can play in meeting these challenges, including several successful campaigns that incorporate supply chain regulation.

Comprehensive Study on Wastages of Supply Chain Information Sharing in Automotive Industries

NASA Astrophysics Data System (ADS)

Sendhil Kumar, R.; Pugazhendhi, S.; Muralidharan, C.; Murali, S.

2017-03-01

A supply chain is a very extensive concept, which encompasses many problems and features when it comes to controlling. Now a day’s lean concept is a very common method to several areas, such as service sectors and manufacturing. Applying the lean concept to supply chain management is a very popular study part, it has attracted many industrial practices and researchers with different applications. Information sharing and technology remain one of the key factors of integrating the supply chain members. Current scenario the competition is no longer between the competing companies, but it happens between the supply chains. So the efficiency of the supply chain is very important. And the effective sharing of information can enhance the supply chain efficiency through minimizing the inventories and Information sharing can increase supply chain efficiency by reducing inventories and stabilizing the production. This paper describes and discusses about the seven deadly wastes of supply chain information with the comparative principle of Toyota production system (TPS) principle approach. How the TPS can be applied to supply chain information sharing And lean tool of 5S concept possibility improve the information sharing.

The distribution of conformational disorder in the high-temperature phases of the crystalline n-alkanes

NASA Astrophysics Data System (ADS)

Maroncelli, M.; Strauss, H. L.; Snyder, R. G.

1985-03-01

The distributions of conformational defects that exist in the high-temperature phase II (also referred to as the hexagonal or rotator phase) of the crystalline n-alkanes C21 and C29 have been measured by an infrared CD2-substitution technique and have been accounted for in terms of a lattice model that provides freedom for longitudinal displacement of the chains. The defects consist almost entirely of gtg' kinks distributed nonuniformly along the chain. The uneven distribution is indicated in the variation in the concentration of gauche bonds measured at various sites along the chain. The highest concentration is at the chain ends, and the concentrations at interior sites decrease exponentially in going toward the middle. To explain the distribution we used a modification of a lattice model that had been successfully applied to the lipid bilayer. Comparison of observed distributions with those computed from the model indicates that the factors that determine the shape of the distribution are quite different in the n-alkane and bilayer cases. For the bilayer, the dominant factor is the variation in the lateral density of chains; for the n-alkane, the dominant factor is associated with longitudinal displacement of the chains.

Effects of spatially distributed sectoral water management on the redistribution of water resources in an integrated water model

NASA Astrophysics Data System (ADS)

Voisin, Nathalie; Hejazi, Mohamad I.; Leung, L. Ruby; Liu, Lu; Huang, Maoyi; Li, Hong-Yi; Tesfa, Teklu

2017-05-01

Realistic representations of sectoral water withdrawals and consumptive demands and their allocation to surface and groundwater sources are important for improving modeling of the integrated water cycle. To inform future model development, we enhance the representation of water management in a regional Earth system (ES) model with a spatially distributed allocation of sectoral water demands simulated by a regional integrated assessment (IA) model to surface and groundwater systems. The integrated modeling framework (IA-ES) is evaluated by analyzing the simulated regulated flow and sectoral supply deficit in major hydrologic regions of the conterminous U.S, which differ from ES studies looking at water storage variations. Decreases in historical supply deficit are used as metrics to evaluate IA-ES model improvement in representating the complex sectoral human activities for assessing future adaptation and mitigation strategies. We also assess the spatial changes in both regulated flow and unmet demands, for irrigation and nonirrigation sectors, resulting from the individual and combined additions of groundwater and return flow modules. Results show that groundwater use has a pronounced regional and sectoral effect by reducing water supply deficit. The effects of sectoral return flow exhibit a clear east-west contrast in the hydrologic patterns, so the return flow component combined with the IA sectoral demands is a major driver for spatial redistribution of water resources and water deficits in the US. Our analysis highlights the need for spatially distributed sectoral representation of water management to capture the regional differences in interbasin redistribution of water resources and deficits.

Fuzzy Entropy Method for Quantifying Supply Chain Networks Complexity

NASA Astrophysics Data System (ADS)

Zhang, Jihui; Xu, Junqin

Supply chain is a special kind of complex network. Its complexity and uncertainty makes it very difficult to control and manage. Supply chains are faced with a rising complexity of products, structures, and processes. Because of the strong link between a supply chain’s complexity and its efficiency the supply chain complexity management becomes a major challenge of today’s business management. The aim of this paper is to quantify the complexity and organization level of an industrial network working towards the development of a ‘Supply Chain Network Analysis’ (SCNA). By measuring flows of goods and interaction costs between different sectors of activity within the supply chain borders, a network of flows is built and successively investigated by network analysis. The result of this study shows that our approach can provide an interesting conceptual perspective in which the modern supply network can be framed, and that network analysis can handle these issues in practice.

Spatial relationships of sector-specific fossil fuel CO2 emissions in the United States

NASA Astrophysics Data System (ADS)

Zhou, Yuyu; Gurney, Kevin Robert

2011-09-01

Quantification of the spatial distribution of sector-specific fossil fuel CO2 emissions provides strategic information to public and private decision makers on climate change mitigation options and can provide critical constraints to carbon budget studies being performed at the national to urban scales. This study analyzes the spatial distribution and spatial drivers of total and sectoral fossil fuel CO2 emissions at the state and county levels in the United States. The spatial patterns of absolute versus per capita fossil fuel CO2 emissions differ substantially and these differences are sector-specific. Area-based sources such as those in the residential and commercial sectors are driven by a combination of population and surface temperature with per capita emissions largest in the northern latitudes and continental interior. Emission sources associated with large individual manufacturing or electricity producing facilities are heterogeneously distributed in both absolute and per capita metrics. The relationship between surface temperature and sectoral emissions suggests that the increased electricity consumption due to space cooling requirements under a warmer climate may outweigh the savings generated by lessened space heating. Spatial cluster analysis of fossil fuel CO2 emissions confirms that counties with high (low) CO2 emissions tend to be clustered close to other counties with high (low) CO2 emissions and some of the spatial clustering extends to multistate spatial domains. This is particularly true for the residential and transportation sectors, suggesting that emissions mitigation policy might best be approached from the regional or multistate perspective. Our findings underscore the potential for geographically focused, sector-specific emissions mitigation strategies and the importance of accurate spatial distribution of emitting sources when combined with atmospheric monitoring via aircraft, satellite and in situ measurements.

Resin blending for toughness in balloon films

NASA Technical Reports Server (NTRS)

Farr, M. P.; Harrison, I. R.

1993-01-01

The influence of chain architecture on toughness is examined by testing blends of HDPE with different types of low density PEs. The LDPE and LLDPE used have reported similar molecular weights, and densities. Two structural factors differentiate these polymers, long chain branching is peculiar to LDPE, and the short chain branching distribution of the two polymers are different. LDPE has branches which are evenly distributed among all chains. In contrast, the short chain branches in LLDPE are distributed heterogeneously. LLDPE and ULDPE have similar branch distributions but, ULDPE has a higher average number of branches per 1000 carbons and consequently a lower density. The effect which these structural differences have on mechanical properties can be used to investigate which parameters control toughness in PE materials.

Seismotectonics of northeastern Sicily and southern Calabria (Italy): New constraints on the tectonic structures featuring in a crucial sector for the central Mediterranean geodynamics

NASA Astrophysics Data System (ADS)

Scarfı, L.; Barberi, G.; Musumeci, C.; Patanè, D.

2016-03-01

The purpose of this study is to gain a better understanding on the tectonic structures featuring in a crucial sector of central Mediterranean area, including the Aeolian Islands, southern Calabria, and northeastern Sicily, where the convergence between Eurasian and African Plates has given rise to a complicated collisional/subduction complex. A high-quality data set of about 3000 earthquakes has been exploited for local earthquake tomography and focal mechanisms computation together with available source mechanisms from published catalogues. The results depict new details of a network of faults which enables the concurrent existence of adjacent compressional and extensional domains. In particular, tomographic images, seismic events distribution, and focal mechanisms pinpoint the geometry and activity of a lithospheric-scale tear faults system which, with a NW-SE trend through Sicily and the Tyrrhenian and Ionian Seas, represents the southern edge of the Ionian subduction trench zone. At crustal depth, this tearing is well highlighted by a rotation of the maximum horizontal stress, moving across the area from west toward east. In addition, the shallow normal fault regime, characterizing the southern Calabria and northeastern Sicily mainland, south of the NW-SE lineament, changes in the deeper part of the crust. Indeed, a NE-SW earthquake distribution, gently dipping NW, and inverse fault solutions indicate a still active contractional deformation in eastern Sicily, caused by the Africa-Eurasia convergence and well framed with the current compressive regime along the southern Tyrrhenian zone and at the front of the Sicilian Chain-Foreland.

Determinants of Distribution Logistics in the Construction Industry

NASA Astrophysics Data System (ADS)

Bukova, Bibiana; Brumercikova, Eva; Kondek, Pavol

2017-03-01

Global business is currently still influenced by the economic crisis and the economic development in each country of the EU. The construction sector is among the most affected sectors of the national economies. The production of building material is a part of the construction industry. Several companies of this sector in the European Union use business logistics effectively. The overall efficiency of the company is influenced by many various external and internal determinants, especially the distribution logistics.

Use of Foodomics for Control of Food Processing and Assessing of Food Safety.

PubMed

Josić, D; Peršurić, Ž; Rešetar, D; Martinović, T; Saftić, L; Kraljević Pavelić, S

Food chain, food safety, and food-processing sectors face new challenges due to globalization of food chain and changes in the modern consumer preferences. In addition, gradually increasing microbial resistance, changes in climate, and human errors in food handling remain a pending barrier for the efficient global food safety management. Consequently, a need for development, validation, and implementation of rapid, sensitive, and accurate methods for assessment of food safety often termed as foodomics methods is required. Even though, the growing role of these high-throughput foodomic methods based on genomic, transcriptomic, proteomic, and metabolomic techniques has yet to be completely acknowledged by the regulatory agencies and bodies. The sensitivity and accuracy of these methods are superior to previously used standard analytical procedures and new methods are suitable to address a number of novel requirements posed by the food production sector and global food market. © 2017 Elsevier Inc. All rights reserved.

Drought disaster vulnerability mapping of agricultural sector in Bringin District, Semarang Regency

NASA Astrophysics Data System (ADS)

Lestari, D. R.; Pigawati, B.

2018-02-01

Agriculture sector is a sector that is directly affected by drought. The phenomenon of drought disaster on agriculture sector has occurred in Semarang regency. One of districts in Semarang which is affected by drought is Bringin district. Bringin district is a productive agricultural area. However, the district experienced the most severe drought in 2015. The question research of this study is, “How is the spatial distribution of drought vulnerability on agriculture sector in Bringin district, Semarang regency?” The purpose of this study is to determine the spatial distribution of drought vulnerability on agriculture sector to village units in Bringin district. This study investigated drought vulnerability based on Intergovernmental Panel on Climate Change (IPCC) by analyzing exposure, sensitivity, and adaptive capacity through mapping process. This study used quantitative approach. There were formulation analysis, scoring analysis, and overlay analysis. Drought vulnerability on agriculture sector in Bringin district was divided into three categories: low, medium, and high.

Spatial Relationships of Sector-Specific Fossil-fuel CO2 Emissions in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Yuyu; Gurney, Kevin R.

2011-07-01

Quantification of the spatial distribution of sector-specific fossil fuel CO2 emissions provides strategic information to public and private decision-makers on climate change mitigation options and can provide critical constraints to carbon budget studies being performed at the national to urban scales. This study analyzes the spatial distribution and spatial drivers of total and sectoral fossil fuel CO2 emissions at the state and county levels in the United States. The spatial patterns of absolute versus per capita fossil fuel CO2 emissions differ substantially and these differences are sector-specific. Area-based sources such as those in the residential and commercial sectors are drivenmore » by a combination of population and surface temperature with per capita emissions largest in the northern latitudes and continental interior. Emission sources associated with large individual manufacturing or electricity producing facilities are heterogeneously distributed in both absolute and per capita metrics. The relationship between surface temperature and sectoral emissions suggests that the increased electricity consumption due to space cooling requirements under a warmer climate may outweigh the savings generated by lessened space heating. Spatial cluster analysis of fossil fuel CO2 emissions confirms that counties with high (low) CO2 emissions tend to be clustered close to other counties with high (low) CO2 emissions and some of the spatial clustering extends to multi-state spatial domains. This is particularly true for the residential and transportation sectors, suggesting that emissions mitigation policy might best be approached from the regional or multi-state perspective. Our findings underscore the potential for geographically focused, sector-specific emissions mitigation strategies and the importance of accurate spatial distribution of emitting sources when combined with atmospheric monitoring via aircraft, satellite and in situ measurements. Keywords: Fossil-fuel; Carbon dioxide emissions; Sectoral; Spatial cluster; Emissions mitigation policy« less

A molecular modeling approach to understand the structure and conformation relationship of (GlcpA)Xylan.

PubMed

Guo, Qingbin; Kang, Ji; Wu, Yan; Cui, Steve W; Hu, Xinzhong; Yada, Rickey Y

2015-12-10

The structure and conformation relationships of a heteropolysaccharide (GlcpA)Xylan in terms of various molecular weights, Xylp/GlcpA ratio and the distribution of GlcpA along xylan chain were investigated using computer modeling. The adiabatic contour maps of xylobiose, XylpXylp(GlcpA) and (GlcpA)XylpXylp(GlcpA) indicated that the insertion of the side group (GlcpA) influenced the accessible conformational space of xylobiose molecule. RIS-Metropolis Monte Carlo method indicated that insertion of GlcpA side chain induced a lowering effect of the calculated chain extension at low GlcpA:Xylp ratio (GlcpA:Xylp = 1:3). The chain, however, became extended when the ratio of GlcpA:Xylp above 2/3. It was also shown that the spatial extension of the polymer chains was dependent on the distribution of side chain: the random distribution demonstrated the most flexible structure compared to block and alternative distribution. The present studies provide a unique insight into the dependence of both side chain ratio and distribution on the stiffness and flexibility of various (GlcpA)Xylan molecules. Copyright © 2015. Published by Elsevier Ltd.

Nanotechnology in food processing sector-An assessment of emerging trends.

PubMed

Kalpana Sastry, R; Anshul, Shrivastava; Rao, N H

2013-10-01

Use of nanoscience based technology in the food industry is fast emerging as new area for research and development. Several research groups including private companies in the industry have initiated research programmes for exploring the wide scope of nanotechnology into the value chain of food processing and manufacturing. This paper discusses the current focus of research in this area and assesses its potential impacts. Using the developed relational database framework with R&D indicators like literature and patent documents for assessment of the potential of nanotechnology in food sector, a model to organize and map nanoresearch areas to the food processing sector was developed. The study indicates that the about five basic categories of nanotechnology applications and functionalities currently in the development of food sector, include food processing, packaging, nutraceuticals delivery, food safety and functional foods.

The Information Sector: Definition and Measurement.

ERIC Educational Resources Information Center

Porat, Marc U.

In the last 20 years the U.S. economy had changed as a result of the increase in production, processing, and distribution of information goods and services. Three information sectors--the primary sector producing information goods and services, the private bureaucracy, and the public bureaucracy--are part of a six-sector economy. Today,…

Study of the Cooldown and Warmup for the Eight Sectors of the Large Hadron Collider

NASA Astrophysics Data System (ADS)

Liu, L.; Riddone, G.; Tavian, L.

2004-06-01

The LHC cryogenic system is based on a five-point feed scheme with eight refrigerators serving the eight sectors of the LHC machine. The paper presents the simplified flow scheme of the eight sectors and the mathematical methods including the program flowchart and the boundary conditions to simulate the cooldown and warmup of these sectors. The methods take into account the effect of the pressure drop across the valves as well as the pressure evolution in the different headers of the cryogenic distribution line. The simulated pressure and temperature profiles of headers of the LHC sector during the cooldown and warmup are given and the temperature evolutions of entire processes of cooldown and warmup are presented. As a conclusion, the functions of the input temperature for the normal and fast cooldown and warmup, the cooldown and warmup time of each sector and the distributions of mass flow rates in each sector are summarized. The results indicate that it is possible to cool down any of the LHC sector within 12.7 days in normal operation and 6.8 days in case of fast operation.

Predictors of Chain Acquisition among Independent Dialysis Facilities

PubMed Central

Pozniak, Alyssa S; Hirth, Richard A; Banaszak-Holl, Jane; Wheeler, John R C

2010-01-01

Objective To determine the predictors of chain acquisition among independent dialysis providers. Data Sources Retrospective facility-level data combined from CMS Cost Reports, Medical Evidence Forms, Annual Facility Surveys, and claims for 1996–2003. Study Design Independent dialysis facilities' probability of acquisition by a dialysis chain (overall and by chain size) was estimated using a discrete time hazard rate model, controlling for financial and clinical performance, practice patterns, market factors, and other facility characteristics. Data Collection The sample includes all U.S. freestanding dialysis facilities that report not being chain affiliated for at least 1 year between 1997 and 2003. Principal Findings Above-average costs and better quality outcomes are significant determinants of dialysis chain acquisition. Facilities in larger markets were more likely to be acquired by a chain. Furthermore, small dialysis chains have different acquisition strategies than large chains. Conclusions Dialysis chains appear to employ a mix of turn-around and cream-skimming strategies. Poor financial health is a predictor of chain acquisition as in other health care sectors, but the increased likelihood of chain acquisition among higher quality facilities is unique to the dialysis industry. Significant differences among predictors of acquisition by small and large chains reinforce the importance of using a richer classification for chain status. PMID:20148985

The Application Research of Modern Intelligent Cold Chain Distribution System Based on Internet of Things Technology

NASA Astrophysics Data System (ADS)

Fan, Dehui; Gao, Shan

This paper implemented an intelligent cold chain distribution system based on the technology of Internet of things, and took the protoplasmic beer logistics transport system as example. It realized the remote real-time monitoring material status, recorded the distribution information, dynamically adjusted the distribution tasks and other functions. At the same time, the system combined the Internet of things technology with weighted filtering algorithm, realized the real-time query of condition curve, emergency alarming, distribution data retrieval, intelligent distribution task arrangement, etc. According to the actual test, it can realize the optimization of inventory structure, and improve the efficiency of cold chain distribution.

The Impact of Service Sector Growth on Changing Patterns of Stratification among Communities.

ERIC Educational Resources Information Center

Kassab, Cathy

This paper examines the impact of increasing service sector employment and decreasing manufacturing employment on the distribution of income across communities on the urban-rural continuum. Changes in the differential distribution of industries and family income across this continuum have important consequences for local services, including…

Assessment of Drinking Water Sold from Private Sector Kiosks in Post-Earthquake Port-au-Prince, Haiti.

PubMed

Patrick, Molly; Steenland, Maria; Dismer, Amber; Pierre-Louis, Jocelyne; Murphy, Jennifer L; Kahler, Amy; Mull, Bonnie; Etheart, Melissa D; Rossignol, Emmanuel; Boncy, Jacques; Hill, Vincent; Handzel, Thomas

2017-10-01

Consumption of drinking water from private vendors has increased considerably in Port-au-Prince, Haiti, in recent decades. A major type of vendor is private kiosks, advertising reverse osmosis-treated water for sale by volume. To describe the scale and geographical distribution of private kiosks in metropolitan Port-au-Prince, an inventory of private kiosks was conducted from July to August 2013. Coordinates of kiosks were recorded with global positioning system units and a brief questionnaire was administered with the operator to document key kiosk characteristics. To assess the quality of water originating from private kiosks, water quality analyses were also conducted on a sample of those inventoried as well as from the major provider company sites. The parameters tested were Escherichia coli , free chlorine residual, pH, turbidity, and total dissolved solids. More than 1,300 kiosks were inventoried, the majority of which were franchises of four large provider companies. Approximately half of kiosks reported opening within 12 months of the date of the inventory. The kiosk treatment chain and sales price was consistent among a majority of the kiosks. Of the 757 kiosks sampled for water quality, 90.9% of samples met World Health Organization (WHO) microbiological guideline at the point of sale for nondetectable E. coli in a 100-mL sample. Of the eight provider company sites tested, all samples met the WHO microbiological guideline. Because of the increasing role of the private sector in drinking water provision in Port-au-Prince and elsewhere in Haiti, this assessment was an important first step for government regulation of this sector.

A spatially explicit whole-system model of the lignocellulosic bioethanol supply chain: an assessment of decentralised processing potential

PubMed Central

Dunnett, Alex J; Adjiman, Claire S; Shah, Nilay

2008-01-01

Background Lignocellulosic bioethanol technologies exhibit significant capacity for performance improvement across the supply chain through the development of high-yielding energy crops, integrated pretreatment, hydrolysis and fermentation technologies and the application of dedicated ethanol pipelines. The impact of such developments on cost-optimal plant location, scale and process composition within multiple plant infrastructures is poorly understood. A combined production and logistics model has been developed to investigate cost-optimal system configurations for a range of technological, system scale, biomass supply and ethanol demand distribution scenarios specific to European agricultural land and population densities. Results Ethanol production costs for current technologies decrease significantly from $0.71 to $0.58 per litre with increasing economies of scale, up to a maximum single-plant capacity of 550 × 106 l year-1. The development of high-yielding energy crops and consolidated bio-processing realises significant cost reductions, with production costs ranging from $0.33 to $0.36 per litre. Increased feedstock yields result in systems of eight fully integrated plants operating within a 500 × 500 km2 region, each producing between 1.24 and 2.38 × 109 l year-1 of pure ethanol. A limited potential for distributed processing and centralised purification systems is identified, requiring developments in modular, ambient pretreatment and fermentation technologies and the pipeline transport of pure ethanol. Conclusion The conceptual and mathematical modelling framework developed provides a valuable tool for the assessment and optimisation of the lignocellulosic bioethanol supply chain. In particular, it can provide insight into the optimal configuration of multiple plant systems. This information is invaluable in ensuring (near-)cost-optimal strategic development within the sector at the regional and national scale. The framework is flexible and can thus accommodate a range of processing tasks, logistical modes, by-product markets and impacting policy constraints. Significant scope for application to real-world case studies through dynamic extensions of the formulation has been identified. PMID:18662392

Global Carbon Fiber Composites. Supply Chain Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Sujit; Warren, Joshua A.; West, Devin

The objective of this study is to identify key opportunities in the carbon fiber (CF) supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas—wind energy, aerospace, automotive, and pressure vessels—that top the list of industries using CF and carbon fiber reinforced polymers (CFRP) and are particularly relevant to the mission of U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE EERE). For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fibermore » and components.« less

Columbus electronic freight management evaluation : achieving business benefits with EFM technologies.

DOT National Transportation Integrated Search

2009-03-01

Effective innovation in information technology (IT) may be the most important tool for the private and public sectors to respond to international supply chain capacity constraints and congestion. Electronic Freight Management (EFM) technologies are m...

Land transportation model for supply chain manufacturing industries

NASA Astrophysics Data System (ADS)

Kurniawan, Fajar

2017-12-01

Supply chain is a system that integrates production, inventory, distribution and information processes for increasing productivity and minimize costs. Transportation is an important part of the supply chain system, especially for supporting the material distribution process, work in process products and final products. In fact, Jakarta as the distribution center of manufacturing industries for the industrial area. Transportation system has a large influences on the implementation of supply chain process efficiency. The main problem faced in Jakarta is traffic jam that will affect on the time of distribution. Based on the system dynamic model, there are several scenarios that can provide solutions to minimize timing of distribution that will effect on the cost such as the construction of ports approaching industrial areas other than Tanjung Priok, widening road facilities, development of railways system, and the development of distribution center.

Local time variations of high-energy plasmaspheric ion pitch angle distributions

DOE PAGES

Sarno-Smith, Lois K.; Liemohn, Michael W.; Skoug, Ruth M.; ...

2016-07-01

Recent observations from the Van Allen Probes Helium Oxygen Proton Electron (HOPE) instrument revealed a persistent depletion in the 1–10 eV ion population in the postmidnight sector during quiet times in the 2 < L < 3 region. This study explores the source of this ion depletion by developing an algorithm to classify 26 months of pitch angle distributions measured by the HOPE instrument. We correct the HOPE low energy fluxes for spacecraft potential using measurements from the Electric Field and Waves (EFW) instrument. A high percentage of low count pitch angle distributions is found in the postmidnight sector coupledmore » with a low percentage of ion distributions peaked perpendicular to the field line. A peak in loss cone distributions in the dusk sector is also observed. Here, these results characterize the nature of the dearth of the near 90° pitch angle 1–10 eV ion population in the near-Earth postmidnight sector. This study also shows, for the first time, low-energy HOPE differential number fluxes corrected for spacecraft potential and 1–10 eV H + fluxes at different levels of geomagnetic activity.« less

Advanced Value Chain Collaboration in Ghana's Cocoa Sector: An Entry Point for Integrated Landscape Approaches?

PubMed

Deans, Howard; Ros-Tonen, Mirjam A F; Derkyi, Mercy

2017-04-15

Value chain analyses have focused mainly on collaboration between chain actors, often neglecting collaboration "beyond the chain" with non-chain actors to tackle food security, poverty and sustainability issues in the landscapes in which these value chains are embedded. Comparing conventional and advanced value chain collaborations involving small-scale cocoa farmers in Ghana, this paper analyzes the merits of a more integrated approach toward value chain collaboration. It particularly asks whether advanced value chain collaboration targeting cocoa-producing areas potentially offers an entry point for implementing a landscape approach. The findings detail current chain actors and institutions and show how advanced value chain collaboration has a greater positive impact than conventional value chain collaboration on farmers' social, human and natural capital. The paper concludes that the integrated approach, focus on learning, and stable relationships with small-scale farmers inherent in advanced value chain collaboration makes it both more sustainable and effective at the local level than conventional approaches. However, its scope and the actors' jurisdictional powers and self-organization are too limited to be the sole tool in negotiating land use and trade-offs at the landscape level. To evolve as such would require certification beyond the farm level, partnering with other landscape stakeholders, and brokering by bridging organizations.

Stability of the sectored morphology of polymer crystallites

NASA Astrophysics Data System (ADS)

Alageshan, Jaya Kumar; Hatwalne, Yashodhan; Muthukumar, Murugappan

2016-09-01

When an entangled interpenetrating collection of long flexible polymer chains dispersed in a suitable solvent is cooled to low enough temperatures, thin lamellar crystals form. Remarkably, these lamellae are sectored, with several growth sectors that have differing melting temperatures and growth kinetics, eluding so far an understanding of their origins. We present a theoretical model to explain this six-decade-old challenge by addressing the elasticity of fold surfaces of finite-sized lamella in the presence of disclination-type topological defects arising from anisotropic line tension. Entrapment of a disclination defect in a lamella results in sectors separated by walls, which are soliton solutions of a two-dimensional elliptic sine-Gordon equation. For flat square morphologies, exact results show that sectored squares are more stable than plain squares if the dimensionless anisotropic line tension parameter α =γa n/√{h4Kϕ } (γa n = anisotropic line tension, h4 = fold energy parameter, Kϕ = elastic constant for two-dimensional orientational deformation) is above a critical value, which depends on the size of the square.

HIV / AIDS and the retail sector.

PubMed

Michael, K

1999-01-01

Employing approximately 1.5 million employees and comprised of 80,000 employers, the retail and wholesale sector accounted for 16.1% of South Africa's gross domestic product in 1996. HIV/AIDS threatens the retail sector, but it is unclear whether the pandemic threatens equally every sub-sector of the industry. The 4 main sub-sectors are fast-moving consumer goods; clothing, footwear, and textiles; vehicles; and furniture and major appliances. The nature of retail infrastructure and competitive and economic trends are described. Over the next decade, AIDS may reduce the size of consumer markets through increased mortality, and will certainly slow growth in spending. The pandemic may also divert spending away from retail merchandise to health care, and threaten businesses which extend credit and offer death benefits and funeral policies to clients. AIDS morbidity and mortality could also disrupt supply chains, especially for retailers who buy their products locally. The vulnerability of retail activities is discussed, with reference to the Living Standards Measure (LSM) developed by the South African Advertising Research Foundation.

Fourier Method for Calculating Fission Chain Neutron Multiplicity Distributions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chambers, David H.; Chandrasekaran, Hema; Walston, Sean E.

Here, a new way of utilizing the fast Fourier transform is developed to compute the probability distribution for a fission chain to create n neutrons. We then extend this technique to compute the probability distributions for detecting n neutrons. Lastly, our technique can be used for fission chains initiated by either a single neutron inducing a fission or by the spontaneous fission of another isotope.

Fourier Method for Calculating Fission Chain Neutron Multiplicity Distributions

DOE PAGES

Chambers, David H.; Chandrasekaran, Hema; Walston, Sean E.

2017-03-27

Here, a new way of utilizing the fast Fourier transform is developed to compute the probability distribution for a fission chain to create n neutrons. We then extend this technique to compute the probability distributions for detecting n neutrons. Lastly, our technique can be used for fission chains initiated by either a single neutron inducing a fission or by the spontaneous fission of another isotope.

Improving Department of Defense Global Distribution Performance Through Network Analysis

DTIC Science & Technology

2016-06-01

network performance increase. 14. SUBJECT TERMS supply chain metrics, distribution networks, requisition shipping time, strategic distribution database...peace and war” (p. 4). USTRANSCOM Metrics and Analysis Branch defines, develops, tracks, and maintains outcomes- based supply chain metrics to...2014a, p. 8). The Joint Staff defines a TDD standard as the maximum number of days the supply chain can take to deliver requisitioned materiel

The malaria testing and treatment market in Kinshasa, Democratic Republic of the Congo, 2013.

PubMed

Mpanya, Godéfroid; Tshefu, Antoinette; Likwela, Joris Losimba

2017-02-28

The Democratic Republic of Congo (DRC) is one of the two most leading contributors to the global burden of disease due to malaria. This paper describes the malaria testing and treatment market in the nation's capital province of Kinshasa, including availability of malaria testing and treatment and relative anti-malarial market share for the public and private sector. A malaria medicine outlet survey was conducted in Kinshasa province in 2013. Stratified multi-staged sampling was used to select areas for the survey. Within sampled areas, all outlets with the potential to sell or distribute anti-malarials in the public and private sector were screened for eligibility. Among outlets with anti-malarials or malaria rapid diagnostic tests (RDT) in stock, a full audit of all available products was conducted. Information collected included product information (e.g. active ingredients, brand name), amount reportedly distributed to patients in the past week, and retail price. In total, 3364 outlets were screened for inclusion across Kinshasa and 1118 outlets were eligible for the study. Among all screened outlets in the private sector only about one in ten (12.1%) were stocking quality-assured Artemisinin-based Combination Therapy (ACT) medicines. Among all screened public sector facilities, 24.5% had both confirmatory testing and quality-assured ACT available, and 20.2% had sulfadoxine-pyrimethamine (SP) available for intermittent preventive therapy during pregnancy (IPTp). The private sector distributed the majority of anti-malarials in Kinshasa (96.7%), typically through drug stores (89.1% of the total anti-malarial market). Non-artemisinin therapies were the most commonly distributed anti-malarial (50.1% of the total market), followed by non quality-assured ACT medicines (38.5%). The median price of an adult quality-assured ACT was $6.59, and more expensive than non quality-assured ACT ($3.71) and SP ($0.44). Confirmatory testing was largely not available in the private sector (1.1%). While the vast majority of anti-malarial medicines distributed to patients in Kinshasa province are sold within the private sector, availability of malaria testing and appropriate treatment for malaria is alarmingly low. There is a critical need to improve access to confirmatory testing and quality-assured ACT in the private sector. Widespread availability and distribution of non quality-assured ACT and non-artemisinin therapies must be addressed to ensure effective malaria case management.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, Alberta; Mann, Margaret; Gelman, Rachel

In evaluating next-generation materials and processes, the supply chain can have a large impact on the life cycle energy impacts. The Materials Flow through Industry (MFI) tool was developed for the Department of Energy's Advanced Manufacturing Office to be able to evaluate the energy impacts of the U.S. supply chain. The tool allows users to perform process comparisons, material substitutions, and grid modifications, and to see the effects of implementing sector efficiency potentials (Masanet, et al. 2009). This paper reviews the methodology of the tool and provides results around specific scenarios.

Chain end distribution of block copolymer in two-dimensional microphase-separated structure studied by scanning near-field optical microscopy.

PubMed

Sekine, Ryojun; Aoki, Hiroyuki; Ito, Shinzaburo

2009-10-01

The chain end distribution of a block copolymer in a two-dimensional microphase-separated structure was studied by scanning near-field optical microscopy (SNOM). In the monolayer of poly(octadecyl methacrylate)-block-poly(isobutyl methacrylate) (PODMA-b-PiBMA), the free end of the PiBMA subchain was directly observed by SNOM, and the spatial distributions of the whole block and the chain end are examined and compared with the convolution of the point spread function of the microscope and distribution function of the model structures. It was found that the chain end distribution of the block copolymer confined in two dimensions has a peak near the domain center, being concentrated in the narrower region, as compared with three-dimensional systems.

Removing the Veil of Ignorance in Assessing the Distributional Impacts of Social Policies.

ERIC Educational Resources Information Center

Carneiro, Pedro; Hansen, Karsten T.; Heckman, James J.

This paper summarizes research on evaluating the distributional consequences of social programs, presenting the evaluation problem for an economy with two sectors (e.g., schooled and unschooled) where agents select or are selected into treatment (one of the two sectors). It considers policies affecting choices of treatment but not potential…

The role of supply-chain initiatives in reducing deforestation

NASA Astrophysics Data System (ADS)

Lambin, Eric F.; Gibbs, Holly K.; Heilmayr, Robert; Carlson, Kimberly M.; Fleck, Leonardo C.; Garrett, Rachael D.; le Polain de Waroux, Yann; McDermott, Constance L.; McLaughlin, David; Newton, Peter; Nolte, Christoph; Pacheco, Pablo; Rausch, Lisa L.; Streck, Charlotte; Thorlakson, Tannis; Walker, Nathalie F.

2018-01-01

A major reduction in global deforestation is needed to mitigate climate change and biodiversity loss. Recent private sector commitments aim to eliminate deforestation from a company's operations or supply chain, but they fall short on several fronts. Company pledges vary in the degree to which they include time-bound interventions with clear definitions and criteria to achieve verifiable outcomes. Zero-deforestation policies by companies may be insufficient to achieve broader impact on their own due to leakage, lack of transparency and traceability, selective adoption and smallholder marginalization. Public-private policy mixes are needed to increase the effectiveness of supply-chain initiatives that aim to reduce deforestation. We review current supply-chain initiatives, their effectiveness, and the challenges they face, and go on to identify knowledge gaps for complementary public-private policies.

Human disease mortality kinetics are explored through a chain model embodying principles of extreme value theory and competing risks.

PubMed

Juckett, D A; Rosenberg, B

1992-04-21

The distributions for human disease-specific mortality exhibit two striking characteristics: survivorship curves that intersect near the longevity limit; and, the clustering of best-fitting Weibull shape parameter values into groups centered on integers. Correspondingly, we have hypothesized that the distribution intersections result from either competitive processes or population partitioning and the integral clustering in the shape parameter results from the occurrence of a small number of rare, rate-limiting events in disease progression. In this report we initiate a theoretical examination of these questions by exploring serial chain model dynamics and parameteric competing risks theory. The links in our chain models are composed of more than one bond, where the number of bonds in a link are denoted the link size and are the number of events necessary to break the link and, hence, the chain. We explored chains with all links of the same size or with segments of the chain composed of different size links (competition). Simulations showed that chain breakage dynamics depended on the weakest-link principle and followed kinetics of extreme-values which were very similar to human mortality kinetics. In particular, failure distributions for simple chains were Weibull-type extreme-value distributions with shape parameter values that were identifiable with the integral link size in the limit of infinite chain length. Furthermore, for chains composed of several segments of differing link size, the survival distributions for the various segments converged at a point in the S(t) tails indistinguishable from human data. This was also predicted by parameteric competing risks theory using Weibull underlying distributions. In both the competitive chain simulations and the parametric competing risks theory, however, the shape values for the intersecting distributions deviated from the integer values typical of human data. We conclude that rare events can be the source of integral shapes in human mortality, that convergence is a salient feature of multiple endpoints, but that pure competition may not be the best explanation for the exact type of convergence observable in human mortality. Finally, while the chain models were not motivated by any specific biological structures, interesting biological correlates to them may be useful in gerontological research.

Trends of geographic inequalities in the distribution of human resources in healthcare system: the case of Iran.

PubMed

Sefiddashti, Sara Emamgholipour; Arab, Mohammad; Ghazanfari, Sadegh; Kazemi, Zhila; Rezaei, Satar; Karyani, Ali Kazemi

2016-07-01

Considering the scarcity of skilled workers in the health sector, the appropriate distribution of human resources in this sector is very important for improving people's health. Having information about the degree of equality in the distribution of health human resources and their time trends is necessary for better planning and efficient use of these resources. The aim of this study was to determine the trend of inequality in the allocation of human resources in the health sector in Tehran between 2007 and 2013. This cross-sectional study was conducted in Tehran Province in Iran. The inequality in the distribution of human resources (specialists, general practitioners, pharmacists, paramedics, dentists, nurses and community health workers (Behvarz)) in 10 cities in Tehran Province was investigated using the Gini coefficient and the dissimilarity index. The time trend of inequality was examined by regression analysis. The required data were collected from the statistical yearbook of the Iran Statistics Center (ISC). The highest value of the Gini coefficient (GC) was related to nurses (GC = 0.291) in 2007. The highest value of the Gini coefficient was related to nurses and Behvarzs in 2008 and 2009, respectively. The distribution of specialists had the highest inequality in 2010 (GC = 0.298), 2011 (GC = 0.300) and 2013 (GC = 0.316). General practitioners had the lowest Gini coefficient for 2007, 2008 and 2012. Nurses for 2009 and Behvarzs for 2010, 2011 and 2013 had the lowest value of Gini coefficient. The dissimilarity indexes for specialists and general practitioners were 26.64 and 8.72 in 2013, respectively. The means of this index for included resources were 31.35, 18.27, 16.91, 22.32, 15.82, 26.74, and 24.33, respectively. The time trend analysis showed that the coefficient of time was positive for all of the human resources, except Behvarzes, and only the coefficient of general practitioners was statistically significant ( p<0.01). Over time, inequalities in the distribution of resources in the health sector have been increasing. By developing the private sector and considering the trend of this sector to operate in the more developed regions, health policy makers should continually evaluate the distribution of human resources, and they should arrange a specific plan for the allocation of human resources in the health sector.

Informed push distribution of contraceptives in Senegal reduces stockouts and improves quality of family planning services.

PubMed

Daff, Bocar Mamadou; Seck, Cheikh; Belkhayat, Hassan; Sutton, Perri

2014-05-01

Contraceptive use in Senegal is among the lowest in the world and has barely increased over the past 5 years, from 10% of married women in 2005 to 12% in 2011. Contraceptive stockouts in public facilities, where 85% of women access family planning services, are common. In 2011, we conducted a supply chain study of 33 public-sector facilities in Pikine and Guediawaye districts of the Dakar region to understand the magnitude and root causes of stockouts. The study included stock audits, surveys with 156 consumers, and interviews with facility staff, managers, and other stakeholders. At the facility level, stockouts of injectables and implants occurred, on average, 43% and 83% of the year, respectively. At least 60% of stockouts occurred despite stock availability at the national level. Data from interviews revealed that the current "pull-based" distribution system was complex and inefficient. In order to reduce stockout rates to the commercial-sector standard of 2% or less, the Government of Senegal and the Senegal Urban Reproductive Health Initiative developed the informed push distribution model (IPM) and pilot-tested it in Pikine district between February 2012 and July 2012. IPM brings the source of supply (a delivery truck loaded with supplies) closer to the source of demand (clients in health facilities) and streamlines the steps in between. With a professional logistician managing stock and deliveries, the health facilities no longer need to place and pick up orders. Stockouts of contraceptive pills, injectables, implants, and intrauterine devices (IUDs) were completely eliminated at the 14 public health facilities in Pikine over the 6-month pilot phase. The government expanded IPM to all 140 public facilities in the Dakar region, and 6 months later stockout rates throughout the region dropped to less than 2%. National coverage of the IPM is expected by July 2015.

Informed push distribution of contraceptives in Senegal reduces stockouts and improves quality of family planning services

PubMed Central

Daff, Bocar Mamadou; Seck, Cheikh; Belkhayat, Hassan; Sutton, Perri

2014-01-01

Contraceptive use in Senegal is among the lowest in the world and has barely increased over the past 5 years, from 10% of married women in 2005 to 12% in 2011. Contraceptive stockouts in public facilities, where 85% of women access family planning services, are common. In 2011, we conducted a supply chain study of 33 public-sector facilities in Pikine and Guediawaye districts of the Dakar region to understand the magnitude and root causes of stockouts. The study included stock audits, surveys with 156 consumers, and interviews with facility staff, managers, and other stakeholders. At the facility level, stockouts of injectables and implants occurred, on average, 43% and 83% of the year, respectively. At least 60% of stockouts occurred despite stock availability at the national level. Data from interviews revealed that the current “pull-based” distribution system was complex and inefficient. In order to reduce stockout rates to the commercial-sector standard of 2% or less, the Government of Senegal and the Senegal Urban Reproductive Health Initiative developed the informed push distribution model (IPM) and pilot-tested it in Pikine district between February 2012 and July 2012. IPM brings the source of supply (a delivery truck loaded with supplies) closer to the source of demand (clients in health facilities) and streamlines the steps in between. With a professional logistician managing stock and deliveries, the health facilities no longer need to place and pick up orders. Stockouts of contraceptive pills, injectables, implants, and intrauterine devices (IUDs) were completely eliminated at the 14 public health facilities in Pikine over the 6-month pilot phase. The government expanded IPM to all 140 public facilities in the Dakar region, and 6 months later stockout rates throughout the region dropped to less than 2%. National coverage of the IPM is expected by July 2015. PMID:25276582

Managing risks in the fisheries supply chain using House of Risk Framework (HOR) and Interpretive Structural Modeling (ISM)

NASA Astrophysics Data System (ADS)

Nguyen, T. L. T.; Tran, T. T.; Huynh, T. P.; Ho, T. K. D.; Le, A. T.; Do, T. K. H.

2018-04-01

One of the sectors which contributes importantly to the development of Vietnam economy is fishery industry. However, during recent year, it has been witnessed many difficulties on managing the performance of the fishery supply chain operations as a whole. In this paper, a framework for supply chain risk management (SCRM) is proposed. Initially, all the activities are mapped by using Supply Chain Operations Reference (SCOR) model. Next, the risk ranking is analyzed in House of Risk. Furthermore, interpretive structural modeling (ISM) is used to identify inter-relationships among supply chain risks and to visualize the risks according to their levels. For illustration, the model has been tested in several case studies with fishery companies in Can Tho, Mekong Delta. This study identifies 22 risk events and 20 risk agents through the supply chain. Also, the risk priority could be used for further House of Risk with proactive actions in future studies.

Supply chain management of health commodities for reducing global disease burden.

PubMed

Chukwu, Otuto Amarauche; Ezeanochikwa, Valentine Nnaemeka; Eya, Benedict Ejikeme

Reducing global disease burden requires improving access to medicines, thus the need for efficient and effective supply chain management for medicines. The Nigerian government came up with new policies on Mega Drug Distribution Centres and National Drug Distribution Guidelines to improve access to quality medicines with pharmacists having a key role to play. However, pharmacists in Nigeria seem not to be aware and adequately equipped to handle the medicines supply chain. This article aimed at assessing the awareness and readiness of Nigerian pharmacists on supply chain management practices for improving access to medicines. Pharmacists in Nigeria's Capital were randomly sampled. Semi-structured questionnaires were administered. Descriptive statistics was used in data analysis. P values less than 0.05 were considered to be significant. 29.3%, 20.7% and 53.7% were not aware of supply chain management, National Drug Distribution Guidelines and Mega Drug Distribution Centres, respectively. 85.46% do not have a copy of the National Drug Distribution Guidelines. 78% were not aware that Mega Drug Distribution Centres are already operational. 35.4% have never been involved in any supply chain management practice. 69.5% often experience stock out of vital and essential medicines, of which 85.2% were in hospitals. 15.9% were successful in managing their facility's supply chains. 84.1% opined that pharmacists in Nigeria are not yet ready to handle the medicines supply chain. Findings showed limited awareness and readiness on supply chain management of medicines. This may be due to inadequate supply chain management skills and infrastructure, poor financing, lack of accountability and poor management. Tackling these as well as pharmacists showing more interest in the country's health policies and obtaining necessary postgraduate certifications will lead to improvements. This will improve access to quality medicines and thus help in the fight to reduce disease burden both locally and globally. Copyright © 2016 Elsevier Inc. All rights reserved.

Providing Cryptographic Security and Evidentiary Chain-of-Custody with the Advanced Forensic Format, Library, and Tools

DTIC Science & Technology

2008-08-19

1 hash of the page page%d sha256 The segment for the SHA256 hash of the page Bad Sector Management: badsectors The number of sectors in the image...written, AFFLIB can automatically compute the page’s MD5, SHA-1, and/or SHA256 hash and write an associated segment containing the hash value. The...are written into segments themselves, with the segment name being name/ sha256 where name is the original segment name sha256 is the hash algorithm used

Incorporating bioenergy into sustainable landscape designs

DOE PAGES

Dale, Virginia H.; Kline, Keith L.; Buford, Marilyn A.; ...

2015-12-30

In this paper, we describe an approach to landscape design that focuses on integrating bioenergy production with other components of environmental, social and economic systems. Landscape design as used here refers to a spatially explicit, collaborative plan for management of landscapes and supply chains. Landscape design can involve multiple scales and build on existing practices to reduce costs or enhance services. Appropriately applied to a specific context, landscape design can help people assess trade-offs when making choices about locations, types of feedstock, transport, refining and distribution of bioenergy products and services. The approach includes performance monitoring and reporting along themore » bioenergy supply chain. Examples of landscape design applied to bioenergy production systems are presented. Barriers to implementation of landscape design include high costs, the need to consider diverse land-management objectives from a wide array of stakeholders, up-front planning requirements, and the complexity and level of effort needed for successful stakeholder involvement. A landscape design process may be stymied by insufficient data or participation. An impetus for coordination is critical, and incentives may be required to engage landowners and the private sector. In conclusion, devising and implementing landscape designs for more sustainable outcomes require clear communication of environmental, social, and economic opportunities and concerns.« less

Incorporating bioenergy into sustainable landscape designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dale, Virginia H.; Kline, Keith L.; Buford, Marilyn A.

In this paper, we describe an approach to landscape design that focuses on integrating bioenergy production with other components of environmental, social and economic systems. Landscape design as used here refers to a spatially explicit, collaborative plan for management of landscapes and supply chains. Landscape design can involve multiple scales and build on existing practices to reduce costs or enhance services. Appropriately applied to a specific context, landscape design can help people assess trade-offs when making choices about locations, types of feedstock, transport, refining and distribution of bioenergy products and services. The approach includes performance monitoring and reporting along themore » bioenergy supply chain. Examples of landscape design applied to bioenergy production systems are presented. Barriers to implementation of landscape design include high costs, the need to consider diverse land-management objectives from a wide array of stakeholders, up-front planning requirements, and the complexity and level of effort needed for successful stakeholder involvement. A landscape design process may be stymied by insufficient data or participation. An impetus for coordination is critical, and incentives may be required to engage landowners and the private sector. In conclusion, devising and implementing landscape designs for more sustainable outcomes require clear communication of environmental, social, and economic opportunities and concerns.« less

Financial crisis, virtual carbon in global value chains, and the importance of linkage effects. The Spain-china case.

PubMed

López, Luis-Antonio; Arce, Guadalupe; Zafrilla, Jorge

2014-01-01

Trade has a disproportionate environmental impact, while the international fragmentation of production promotes different patterns of intermediate inputs and final goods. Therefore, we split up the balance of domestic embodied emissions in trade (BDEET) to assess it. We find that Spain has a significant emissions deficit with China between 2005 and 2011. The Global Financial Crisis of 2008 reduced Spanish imports of pollution-intensive inputs from China and slightly improved the BDEET. China primarily exports indirect virtual carbon, representing 86% of the total, especially from Production of electricity, gas, and water sector. These linkages effects in China indicate that post-Kyoto agreements must focus not only on traded goods but also on the environmental efficiency of all domestic production chains. The methodology proposed allows us to identify the agents responsible for this trade in both Spain and China, namely the sectors importing intermediate inputs (Construction and Transport equipment) and industries and consumers importing final goods (Textiles, Other manufactures, Computers, and Machinery). The relevant sectors uncertainties found when we compare the results for BDEET and emissions embodied in bilateral trade (BEET) lead us to recommend the former methodology to evaluate the implications of environmental and energy policy for different industries and agents.

State of art of nanotechnology applications in the meat chain: A qualitative synthesis.

PubMed

Belluco, Simone; Gallocchio, Federica; Losasso, Carmen; Ricci, Antonia

2018-05-03

Nanotechnology is a promising area in industry with a broad range of applications including in the agri-food sector. Several studies have investigated the potential benefits deriving from use of nanomaterials in the context of the whole food chain drawing scenarios of benefits but also potential for concerns. Among the agri-food sector, animal production has potential for nanomaterial application but also for safety concerns due to the possibility of nanomaterial accumulation along the farm-to-fork path. Scope and Approach: The aim of this work was to define the state of the art of nanomaterial applications in the animal production sector by assessing data belonging to recently publishes studies. To do this, a qualitative synthesis approach was applied to build a fit-for-purpose framework and to summarise relevant themes in the context of effectiveness, feasibility and health concerns. Key findings and conclusions: Nanomaterials have potential for use in a wide range of applications from feed production and farming to food packaging, including several detection tools designed for the benefit of consumer protection. The current high degree of variability in nanomaterials tested and in study designs impairs external validation of research results. Further research is required to clearly define which safe nanomaterial applications have the potential to reach the market.

Value Chains of Public and Private Health-care Services in a Small EU Island State: A SWOT Analysis.

PubMed

Buttigieg, Sandra C; Schuetz, Marcus; Bezzina, Frank

2016-01-01

The global financial and macroeconomic crisis of 2008/2009 and the ensuing recessions obliged policy makers to maximize use of resources and cut down on waste. Specifically, in health care, governments started to explore ways of establishing collaborations between the public and private health-care sectors. This is essential so as to ensure the best use of available resources, while securing quality of delivery of care as well as health systems sustainability and resilience. This qualitative study explores complementary and mutual attributes in the value creation process to patients by the public and private health-care systems in Malta, a small European Union island state. A workshop was conducted with 28 professionals from both sectors to generate two separate value chains, and this was followed by an analysis of strengths, weaknesses, opportunities, and threats (SWOT). The latter revealed several strengths and opportunities, which can better equip health-policy makers in the quest to maximize provision of health-care services. Moreover, the analysis also highlighted areas of weaknesses in both sectors as well as current threats of the external environment that, unless addressed, may threaten the state's health-care system sustainability and resilience to macroeconomic shocks. The study goes on to provide feasible recommendations aimed at maximizing provision of health-care services in Malta.

Organization environmental footprint applying a multi-regional input-output analysis: A case study of a wood parquet company in Spain.

PubMed

Martinez, Sara; Marchamalo, Miguel; Alvarez, Sergio

2018-03-15

Wood has been presented as a carbon-neutral material capable of significantly contribute to climate change mitigation and has become an appealing option for the building sector. This paper presents the quantification of the organization environmental footprint of a wood parquet company. The multi-regional input-output (MRIO) database EXIOBASE was used with a further structural path analysis decomposition. The application of the proposed method quantifies 14 environmental impacts. Highly influential sectors and regions responsible for these impacts are assessed to propose efficient measures. For the parquet company studied, the highest impact category once normalized was ozone depletion and the dominant sector responsible for this impact was the chemical industry from Spain and China. The structural path decomposition related to ozone loss revealed that the indirect impacts embedded in the supply chain are higher than the direct impacts. It can be concluded that the assessment of the organizational environmental footprint can be carried out applying this well-structured and robust method. Its implementation will enable tracking of the environmental burdens through a company's supply chain at a global scale and provide information for the adoption of environmental strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

The effect of riboflavin-UV-A treatment on corneal limbal epithelial cells--a study on human cadaver eyes.

PubMed

Vimalin, Jeyalatha; Gupta, Nidhi; Jambulingam, Malathi; Padmanabhan, Prema; Madhavan, Hajib N

2012-09-01

To determine the effect of riboflavin-UV-A treatment on the corneal limbal epithelial cells during a corneal collagen cross-linking (CXL) procedure. Thirty freshly enucleated human cadaveric eyeballs were subjected to a CXL procedure, mimicking the clinical protocol. During the UV-A exposure, one half of the limbus (sector A) was left unprotected, whereas the other half (sector B) was covered by a metal shield. Limbal biopsies from both sectors before and after the procedure were analyzed. Each strip of tissue was divided into 3 segments, for cell count of viable cells, for cultivation on human amniotic membrane (HAM), and for stem cell and differentiated corneal epithelial cell marker studies using reverse transcriptase-polymerase chain reaction. Compared with the cell count before CXL, there was a statistically significant drop in the mean number of viable cells after CXL in sector A but not in sector B. Biopsies from both sectors before CXL and from sector B after CXL showed good growth on HAM. Biopsies from sector A after CXL showed no growth on HAM. The putative stem cell marker ABCG2 was absent in all samples and p63 was absent in 3 of 10 samples taken from sector A after CXL. All markers were present in all samples from sector B after CXL. Riboflavin-UV-A treatment can result in damage to limbal epithelial cells, particularly the stem cells. Covering the limbal region with a metal shield effectively prevents this damage.

HVDC Transmission an Outlook and Significance for Pakistani Power Sector

NASA Astrophysics Data System (ADS)

Ahmad, Muhammad; Wang, Zhixin; Wang, Jinjian; Baloach, Mazhar H.; Longxin, Bao; Hua, Qing

2018-04-01

Recently a paradigm shift in the power sector is observed, i.e., countries across the globe have deviated their attention to distributed generation rather than conventional centralized bulk generation. Owing to the above narrative, distributed energy resources e.g., wind and PV have gained the adequate attention of governments and researchers courtesy to their eco-friendly nature. On the contrary, the increased infiltration of distributed generation to the power system has introduced many technical and economical glitches such as long-distance transmission, transmission lines efficiency, control capability and cost etc. To mitigate these complications, the utility of high voltage direct current (HVDC) transmission has emerged as a possible solution. In this context, this paper includes a brief discussion on the fundamentals HVDC and its significance in Pakistani power sector. Furthermore, the potential of distributed energy resources for Pakistan is also the subject matter of this paper, so that significance of HVDC transmission can effectively be deliberated.

Salmonella serotype distribution in the Dutch broiler supply chain.

PubMed

van Asselt, E D; Thissen, J T N M; van der Fels-Klerx, H J

2009-12-01

Salmonella serotype distribution can give insight in contamination routes and persistence along a production chain. Therefore, it is important to determine not only Salmonella prevalence but also to specify the serotypes involved at the different stages of the supply chain. For this purpose, data from a national monitoring program in the Netherlands were used to estimate the serotype distribution and to determine whether this distribution differs for the available sampling points in the broiler supply chain. Data covered the period from 2002 to 2005, all slaughterhouses (n = 22), and the following 6 sampling points: departure from hatchery, arrival at the farm, departure from the farm, arrival at the slaughterhouse, departure from the slaughterhouse, and end of processing. Furthermore, retail data for 2005 were used for comparison with slaughterhouse data. The following serotypes were followed throughout the chain: Salmonella Enteritidis, Salmonella Typhimurium, Salmonella Paratyphi B var. Java (Salmonella Java), Salmonella Infantis, Salmonella Virchow, and Salmonella Mbandaka. Results showed that serotype distribution varied significantly throughout the supply chain (P < 0.05). Main differences were found at the farm and at the slaughterhouse (within one stage), and least differences were found between departure from one stage and arrival at the next stage. The most prominent result was the increase of Salmonella Java at farm level. This serotype remained the most prominent pathogen throughout the broiler supply chain up to the retail phase.

Incorporating Multifaceted Mental Health Prevention Services in Community Sectors-of-Care

ERIC Educational Resources Information Center

Gewirtz, Abigail H.; August, Gerald J.

2008-01-01

This article proposes a framework for embedding prevention services into community sectors-of-care. Community sectors-of-care include both formal and grassroot organizations distributed throughout a community that provide various resources and services to at-risk children and their families. Though the child population served by these…

Vaccine delivery management.

PubMed

Cheyne, J

1989-01-01

During the typical 12- to 18-month voyage of a vaccine from manufacturer to immunization site, many situations arise in which the cold chain may be interrupted. Extensive efforts have been made in the 1980s to ensure an uninterrupted cold chain through the use of improved equipment and better training of personnel. One important advance is the vaccine cold-chain monitor, which identifies weak spots in the cold chain and prevents the use of heat-damaged vaccine. Further improvements will require efforts by the recipient countries (e.g., better use of the private sector for transport and equipment management), by donor agencies (e.g., greater consideration of the operational and maintenance costs of the equipment selected and resolution of fuel shortages), and by industry (e.g., more appropriate packaging and pricing of vaccine, extension of the expiration period, and increased heat stability.

Assessment of Drinking Water Sold from Private Sector Kiosks in Post-Earthquake Port-au-Prince, Haiti

PubMed Central

Steenland, Maria; Dismer, Amber; Pierre-Louis, Jocelyne; Murphy, Jennifer L.; Kahler, Amy; Mull, Bonnie; Etheart, Melissa D.; Rossignol, Emmanuel; Boncy, Jacques; Hill, Vincent; Handzel, Thomas

2017-01-01

Abstract. Consumption of drinking water from private vendors has increased considerably in Port-au-Prince, Haiti, in recent decades. A major type of vendor is private kiosks, advertising reverse osmosis-treated water for sale by volume. To describe the scale and geographical distribution of private kiosks in metropolitan Port-au-Prince, an inventory of private kiosks was conducted from July to August 2013. Coordinates of kiosks were recorded with global positioning system units and a brief questionnaire was administered with the operator to document key kiosk characteristics. To assess the quality of water originating from private kiosks, water quality analyses were also conducted on a sample of those inventoried as well as from the major provider company sites. The parameters tested were Escherichia coli, free chlorine residual, pH, turbidity, and total dissolved solids. More than 1,300 kiosks were inventoried, the majority of which were franchises of four large provider companies. Approximately half of kiosks reported opening within 12 months of the date of the inventory. The kiosk treatment chain and sales price was consistent among a majority of the kiosks. Of the 757 kiosks sampled for water quality, 90.9% of samples met World Health Organization (WHO) microbiological guideline at the point of sale for nondetectable E. coli in a 100-mL sample. Of the eight provider company sites tested, all samples met the WHO microbiological guideline. Because of the increasing role of the private sector in drinking water provision in Port-au-Prince and elsewhere in Haiti, this assessment was an important first step for government regulation of this sector. PMID:29064355

Global ionospheric current distributions during substorms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahn, B.; Kamide, Y.; Akasofu, S.

1984-03-01

The growth and decay of global ionospheric currents during magnetospheric substorms on March 17, 18, and 19, 1978 are examined on the basis of magnetic records from the six IMS meridian chains of observatories and others (the total number being 71). The computer code developed by Kamide et al. (1981) and the conductivity model developed by Ahn et al. (1983) are used. Several substorms centered around 1000-1200 UT are chosen in this presentation, since the simultaneous all-sky and riometer records are essential in timing the substorm epochs. Several global feautes that are common to most substorms during the three-day intervalmore » include the following: (1) During a quiet period, currents are often present in the cusp and/or polar cap regions. The cusp current consists of a pair of east-west currents and the polar cap current consists of several vortices. (2) When the interplanetary magnetic field (IMF) B/sub z/ component is positive, but decreases in magnitude, a well-defined westward electrojet develops in the midnight sector. However, this development is not evident in the AE index. (3) A gradual, but distinct growth (often followed by a rapid and large increase) in the AE index is indentified as the intensification of a weaksubstorm current system, which was mentioned in (2), accompanied by typical auroral substorm features, including riometer absorption. (4) The subsequent sharp increase of the AE index arises primarily from a deep intrusion of the westward electrojet into the pre-midnight sector and its equatorward shift. (5) The overall increase of the global current can be significantly differnt fromm what a sharp increase of the AE index indicates. (6) During the recovery phase, the intruded westward electrojet recedes towards the dawn sector.« less

A transitional volume beneath the Sannio-Irpinia border region (southern Apennines): Different tectonic styles at different depths

NASA Astrophysics Data System (ADS)

De Matteo, Ada; Massa, Bruno; Milano, Girolamo; D'Auria, Luca

2018-01-01

In this paper we investigate the border between the Sannio and Irpinia seismogenic regions, a sector of the southern Apennine chain considered among the most active seismic areas of the Italian peninsula, to shed further light on its complex seismotectonic setting. We integrated recent seismicity with literature data. A detailed analysis of the seismicity that occurred in the 2013-2016 time interval was performed. The events were relocated, after manual re-picking, using different approaches. To retrieve information about the stress field active in the area, inversion of Fault Plane Solutions was also carried out. Hypocentral distribution of the relocated events (ML ≤ 3.5), whose depth is included between 5 and 25 km with the deepest ones located in the NW sector of the study area, shows a different pattern between the northern sector and the southern one. The computed Fault Plane Solutions can be grouped in three depth ranges: < 12 km, dominated by normal dip-slip kinematics; 12-18 km, characterized by normal dip-slip and strike-slip kinematics; > 18 km, dominated by strike-slip kinematics. Stress field inversion across the whole area shows that we are dealing with an heterogeneous set of data, apparently governed by distinct stress fields. We built an upper crustal model profile through integration of geological data, well logs and seismic tomographic profiles. Our results suggest the co-existence of different tectonic styles at distinct crustal depths: the upper crust seems to be affected mostly by normal faulting, whereas strike-slip faulting prevails in the intermediate and lower crust. We infer about the existence of a transitional volume, located between 12 and 18 km depth, between the Sannio and Irpinia regions, acting as a vertical transfer zone.

Statistical thermodynamics of amphiphile chains in micelles

PubMed Central

Ben-Shaul, A.; Szleifer, I.; Gelbart, W. M.

1984-01-01

The probability distribution of amphiphile chain conformations in micelles of different geometries is derived through maximization of their packing entropy. A lattice model, first suggested by Dill and Flory, is used to represent the possible chain conformations in the micellar core. The polar heads of the chains are assumed to be anchored to the micellar surface, with the other chain segments occupying all lattice sites in the interior of the micelle. This “volume-filling” requirement, the connectivity of the chains, and the geometry of the micelle define constraints on the possible probability distributions of chain conformations. The actual distribution is derived by maximizing the chain's entropy subject to these constraints; “reversals” of the chains back towards the micellar surface are explicitly included. Results are presented for amphiphiles organized in planar bilayers and in cylindrical and spherical micelles of different sizes. It is found that, for all three geometries, the bond order parameters decrease as a function of the bond distance from the polar head, in accordance with recent experimental data. The entropy differences associated with geometrical changes are shown to be significant, suggesting thereby the need to include curvature (environmental)-dependent “tail” contributions in statistical thermodynamic treatments of micellization. PMID:16593492

Carbon footprint of electronic devices

NASA Astrophysics Data System (ADS)

Sloma, Marcin

2013-07-01

Paper assesses the greenhouse gas emissions related to the electronic sectors including information and communication technology and media sectors. While media often presents the carbon emission problem of other industries like petroleum industry, the airlines and automobile sectors, plastics and steel manufacturers, the electronics industry must include the increasing carbon footprints caused from their applications like media and entertainment, computers and cooling devices, complex telecommunications networks, cloud computing and powerful mobile phones. In that sense greenhouse gas emission of electronics should be studied in a life cycle perspective, including regular operational electricity use. Paper presents which product groups or processes are major contributors in emission. From available data and extrapolation of existing information we know that the information and communication technology sector produced 1.3% and media sector 1.7% of global gas emissions within production cycle, using the data from 2007.In the same time global electricity use of that sectors was 3.9% and 3.2% respectively. The results indicate that for both sectors operation leads to more gas emissions than manufacture, although impacts from the manufacture is significant, especially in the supply chain. Media electronics led to more emissions than PCs (manufacture and operation). Examining the role of electronics in climate change, including disposal of its waste, will enable the industry to take internal actions, leading to lowering the impact on the climate change within the sector itself.

What is the private sector? Understanding private provision in the health systems of low-income and middle-income countries.

PubMed

Mackintosh, Maureen; Channon, Amos; Karan, Anup; Selvaraj, Sakthivel; Cavagnero, Eleonora; Zhao, Hongwen

2016-08-06

Private health care in low-income and middle-income countries is very extensive and very heterogeneous, ranging from itinerant medicine sellers, through millions of independent practitioners-both unlicensed and licensed-to corporate hospital chains and large private insurers. Policies for universal health coverage (UHC) must address this complex private sector. However, no agreed measures exist to assess the scale and scope of the private health sector in these countries, and policy makers tasked with managing and regulating mixed health systems struggle to identify the key features of their private sectors. In this report, we propose a set of metrics, drawn from existing data that can form a starting point for policy makers to identify the structure and dynamics of private provision in their particular mixed health systems; that is, to identify the consequences of specific structures, the drivers of change, and levers available to improve efficiency and outcomes. The central message is that private sectors cannot be understood except within their context of mixed health systems since private and public sectors interact. We develop an illustrative and partial country typology, using the metrics and other country information, to illustrate how the scale and operation of the public sector can shape the private sector's structure and behaviour, and vice versa. Copyright © 2016 Elsevier Ltd. All rights reserved.

Multi-chain Markov chain Monte Carlo methods for computationally expensive models

NASA Astrophysics Data System (ADS)

Huang, M.; Ray, J.; Ren, H.; Hou, Z.; Bao, J.

2017-12-01

Markov chain Monte Carlo (MCMC) methods are used to infer model parameters from observational data. The parameters are inferred as probability densities, thus capturing estimation error due to sparsity of the data, and the shortcomings of the model. Multiple communicating chains executing the MCMC method have the potential to explore the parameter space better, and conceivably accelerate the convergence to the final distribution. We present results from tests conducted with the multi-chain method to show how the acceleration occurs i.e., for loose convergence tolerances, the multiple chains do not make much of a difference. The ensemble of chains also seems to have the ability to accelerate the convergence of a few chains that might start from suboptimal starting points. Finally, we show the performance of the chains in the estimation of O(10) parameters using computationally expensive forward models such as the Community Land Model, where the sampling burden is distributed over multiple chains.

Probing the Differential Tissue Distribution and Bioaccumulation Behavior of Per- and Polyfluoroalkyl Substances of Varying Chain-Lengths, Isomeric Structures and Functional Groups in Crucian Carp.

PubMed

Shi, Yali; Vestergren, Robin; Nost, Therese Haugdahl; Zhou, Zhen; Cai, Yaqi

2018-04-17

Understanding the bioaccumulation mechanisms of per- and polyfluoroalkyl substances (PFASs) across different chain-lengths, isomers and functional groups represents a monumental scientific challenge with implications for chemical regulation. Here, we investigate how the differential tissue distribution and bioaccumulation behavior of 25 PFASs in crucian carp from two field sites impacted by point sources can provide information about the processes governing uptake, distribution and elimination of PFASs. Median tissue/blood ratios (TBRs) were consistently <1 for all PFASs and tissues except bile which displayed a distinct distribution pattern and enrichment of several perfluoroalkyl sulfonic acids. Transformation of concentration data into relative body burdens (RBBs) demonstrated that blood, gonads, and muscle together accounted for >90% of the amount of PFASs in the organism. Principal component analyses of TBRs and RBBs showed that the functional group was a relatively more important predictor of internal distribution than chain-length for PFASs. Whole body bioaccumulation factors (BAFs) for short-chain PFASs deviated from the positive relationship with hydrophobicity observed for longer-chain homologues. Overall, our results suggest that TBR, RBB, and BAF patterns were most consistent with protein binding mechanisms although partitioning to phospholipids may contribute to the accumulation of long-chain PFASs in specific tissues.

Time Evolving Fission Chain Theory and Fast Neutron and Gamma-Ray Counting Distributions

DOE PAGES

Kim, K. S.; Nakae, L. F.; Prasad, M. K.; ...

2015-11-01

Here, we solve a simple theoretical model of time evolving fission chains due to Feynman that generalizes and asymptotically approaches the point model theory. The point model theory has been used to analyze thermal neutron counting data. This extension of the theory underlies fast counting data for both neutrons and gamma rays from metal systems. Fast neutron and gamma-ray counting is now possible using liquid scintillator arrays with nanosecond time resolution. For individual fission chains, the differential equations describing three correlated probability distributions are solved: the time-dependent internal neutron population, accumulation of fissions in time, and accumulation of leaked neutronsmore » in time. Explicit analytic formulas are given for correlated moments of the time evolving chain populations. The equations for random time gate fast neutron and gamma-ray counting distributions, due to randomly initiated chains, are presented. Correlated moment equations are given for both random time gate and triggered time gate counting. There are explicit formulas for all correlated moments are given up to triple order, for all combinations of correlated fast neutrons and gamma rays. The nonlinear differential equations for probabilities for time dependent fission chain populations have a remarkably simple Monte Carlo realization. A Monte Carlo code was developed for this theory and is shown to statistically realize the solutions to the fission chain theory probability distributions. Combined with random initiation of chains and detection of external quanta, the Monte Carlo code generates time tagged data for neutron and gamma-ray counting and from these data the counting distributions.« less

Is there a need for government interventions to adapt energy infrastructures to climate change? A German case study

NASA Astrophysics Data System (ADS)

Groth, Markus; Cortekar, Jörg

2015-04-01

The option of adapting to climate change is becoming more and more important in climate change policy. Hence, responding to climate change now involves both mitigation to address the cause and adaptation as a response to already ongoing and expected changes. These changes also have relevance for the current and future energy sector in Germany. An energy sector that in the course of the German Energiewende also has to deal with a fundamental shift in energy supply from fossil fuel to renewable energies in the next decades. Thereby it needs to be considered that the energy sector is one critical infrastructure in the European Union that needs to be protected. Critical infrastructures can be defined as organisations or facilities of special importance for the country and its people where failure or functional impairment would lead to severe supply bottlenecks, significant disturbance of public order or other dramatic consequences. Regarding the adaptation to climate change, the main question is, whether adaptation options will be implemented voluntarily by companies or not. This will be the case, when the measure is considered a private good and is economically beneficial. If, on the contrary, the measure is considered a public good, additional incentives are needed. Based on a synthesis of the current knowledge regarding the possible impacts of climate change on the German energy sector along its value-added chain, the paper points out, that the power distribution and the grid infrastructure is consistently attributed the highest vulnerability. Direct physical impacts and damages to the transmission and distribution grids, utility poles, power transformers, and relay stations are expected due to more intense extreme weather events like storms, floods or thunderstorms. Furthermore fundaments of utility poles can be eroded and relay stations or power transformers can be flooded, which might cause short circuits etc. Besides these impacts causing damage to the physical infrastructure, there might also occur efficiency losses in electricity transmission due to very high or very low temperatures. While vulnerabilities in power generation primarily result in efficiency losses, interferences on the grid level could cause power outages with cascade effects influencing other sectors of society and economy. The paper argues that these possible impacts of a changing climate should be taken into account in the upcoming infrastructure projects in the course of the Energiewende. Therefore governmental intervention - like legal obligations or incentives by the use of economic instruments - are for example justifiable regarding measures to adapt the grid infrastructure as a critical infrastructure that needs to be protected against current and future impacts of climate change.

An equal force theory for network models of soft materials with arbitrary molecular weight distribution

NASA Astrophysics Data System (ADS)

Verron, E.; Gros, A.

2017-09-01

Most network models for soft materials, e.g. elastomers and gels, are dedicated to idealized materials: all chains admit the same number of Kuhn segments. Nevertheless, such standard models are not appropriate for materials involving multiple networks, and some specific constitutive equations devoted to these materials have been derived in the last few years. In nearly all cases, idealized networks of different chain lengths are assembled following an equal strain assumption; only few papers adopt an equal stress assumption, although some authors argue that such hypothesis would reflect the equilibrium of the different networks in contact. In this work, a full-network model with an arbitrary chain length distribution is derived by considering that chains of different lengths satisfy the equal force assumption in each direction of the unit sphere. The derivation is restricted to non-Gaussian freely jointed chains and to affine deformation of the sphere. Firstly, after a proper definition of the undeformed configuration of the network, we demonstrate that the equal force assumption leads to the equality of a normalized stretch in chains of different lengths. Secondly, we establish that the network with chain length distribution behaves as an idealized full-network of which both chain length and density of are provided by the chain length distribution. This approach is finally illustrated with two examples: the derivation of a new expression for the Young modulus of bimodal interpenetrated polymer networks, and the prediction of the change in fluorescence during deformation of mechanochemically responsive elastomers.

Emergent Risks In Critical Infrastructures

NASA Astrophysics Data System (ADS)

Dynes, Scott

Firms cannot function successfully without managing a host of internal and external organizational and process interdependencies. Part of this involves business continuity planning, which directly aects how resilient arm and its business sector are in the face of disruptions. This paper presents the results of eld studies related to information risk management practices in the health care and retail sectors. The studies explore information risk management coordinating signals within and across rms in these sectors as well as the potential eects of cyber disruptions on the rms as stand-alone entities and as part of a critical infrastructure. The health care case study investigates the impact of the Zotob worm on the ability to deliver medical care and treatment. The retail study examines the resilience of certain elements of the food supply chain to cyber disruptions.

The roles of energy and material efficiency in meeting steel industry CO2 targets.

PubMed

Milford, Rachel L; Pauliuk, Stefan; Allwood, Julian M; Müller, Daniel B

2013-04-02

Identifying strategies for reducing greenhouse gas emissions from steel production requires a comprehensive model of the sector but previous work has either failed to consider the whole supply chain or considered only a subset of possible abatement options. In this work, a global mass flow analysis is combined with process emissions intensities to allow forecasts of future steel sector emissions under all abatement options. Scenario analysis shows that global capacity for primary steel production is already near to a peak and that if sectoral emissions are to be reduced by 50% by 2050, the last required blast furnace will be built by 2020. Emissions reduction targets cannot be met by energy and emissions efficiency alone, but deploying material efficiency provides sufficient extra abatement potential.

27 CFR 53.100 - Exclusion of local advertising charges from sale price.

Code of Federal Regulations, 2014 CFR

2014-04-01

... section, the advertising must be initiated or obtained by one or more of the persons in the chain of... chain of distribution of the article. In general, advertising of an article is considered to be initiated or obtained by one or more persons in the chain of distribution of the article if any such person...

27 CFR 53.100 - Exclusion of local advertising charges from sale price.

Code of Federal Regulations, 2013 CFR

2013-04-01

... section, the advertising must be initiated or obtained by one or more of the persons in the chain of... chain of distribution of the article. In general, advertising of an article is considered to be initiated or obtained by one or more persons in the chain of distribution of the article if any such person...

27 CFR 53.100 - Exclusion of local advertising charges from sale price.

Code of Federal Regulations, 2012 CFR

2012-04-01

... section, the advertising must be initiated or obtained by one or more of the persons in the chain of... chain of distribution of the article. In general, advertising of an article is considered to be initiated or obtained by one or more persons in the chain of distribution of the article if any such person...

27 CFR 53.100 - Exclusion of local advertising charges from sale price.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section, the advertising must be initiated or obtained by one or more of the persons in the chain of... chain of distribution of the article. In general, advertising of an article is considered to be initiated or obtained by one or more persons in the chain of distribution of the article if any such person...

27 CFR 53.100 - Exclusion of local advertising charges from sale price.

Code of Federal Regulations, 2011 CFR

2011-04-01

... section, the advertising must be initiated or obtained by one or more of the persons in the chain of... chain of distribution of the article. In general, advertising of an article is considered to be initiated or obtained by one or more persons in the chain of distribution of the article if any such person...

26 CFR 1.959-1 - Exclusion from gross income of United States persons of previously taxed earnings and profits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... amounts so taxed are taxed again when actually distributed directly, or indirectly through a chain of... chain of ownership where such amounts would otherwise be again included in the income of such... are distributed to such shareholder directly, or indirectly through a chain of ownership described in...

Mobile monitoring of fugitive methane emissions from natural gas consumer industries

EPA Science Inventory

Natural gas is used as a feedstock for major industrial processes, such as ammonia and fertilizer production. However, fugitive methane emissions from many major end-use sectors of the natural gas supply chain have not yet been well quantified. This presentation introduces new m...

The Mobile Monitoring of fugitive methane emissions from natural gas consumer industries

EPA Science Inventory

Natural gas is used as a feedstock for major industrial processes, such as ammonia and fertilizer production. However, fugitive methane emissions from many major end-use sectors of the natural gas supply chain have not been quantified yet. This presentation introduces new tools ...

Developing Supply Chain Management Program: A Competency Model

ERIC Educational Resources Information Center

Sauber, Matthew H.; McSurely, Hugh B.; Tummala, V. M. Rao

2008-01-01

Purpose: This paper aims to show the process of designing and measuring learning competencies in program development. Design/methodology/approach: The paper includes cross-sectoral comparisons to draw on programmatic and pedagogical strategies, more commonly utilized in vocational education, and transfer the application of these strategies into…

Education, Training and Youth Affairs--Issues and Public Policy Responses.

ERIC Educational Resources Information Center

Sedgwick, Steve

Education and training in Australia represent a significant sector of the economy, comprising some 7 percent of the Gross Domestic Product. Public policy is fashioned to support three main sectors: schools, vocational education and training, and higher education. The mix of Commonwealth policy across these sectors is determined by distribution of…

Distribution of physical therapists working on public and private establishments in different levels of complexity of health care in Brazil.

PubMed

Costa, Larissa R; Costa, José L R; Oishi, Jorge; Driusso, Patricia

2012-01-01

The Brazilian Health System is organized on a regional and hierarchical form with three levels of complexity of health care. The Primary Care represents the first element of a continuing health care process, complemented by specialized actions. However, the centrality of the specialized care is still a problem in Brazil, especially in the private sector. Studies on the distribution of professionals in the health system allowing the formulation of appropriate policies are needed. To investigate the distribution of physical therapists in the levels of complexity of health care and between public and private establishments, according to data from the National Register of Health Service Providers (NRHSP). A descriptive cross-sectional study was performed considering NRHSP-national bank data collected in March 2010 and demographic census 2010 data. Data were analyzed through descriptive statistics techniques. We identified 53,181 registries of physical therapists, 60% linked to the private sector. Only 13% of all entries were linked to primary care. The predominance in specialized care occurred in the public sector (65%) and private sector (100%). The specialized establishments of private sector linked to the southeast region (16,043) were the main sites of physical therapists. Only the public sector in the south had a majority in the Primary Care. When considering the sizes of the cities, there is focus on specialist care in bigger cities. This study identified the concentration of physical therapists in the specialized care, mostly in metropolis and big cities and in the private sector, with restricted to participation in the primary care.

Maximum Regional Emission Reduction Potential in Residential Sector Based on Spatial Distribution of Population and Resources

NASA Astrophysics Data System (ADS)

Winijkul, E.; Bond, T. C.

2011-12-01

In the residential sector, major activities that generate emissions are cooking and heating, and fuels ranging from traditional (wood) to modern (natural gas, or electricity) are used. Direct air pollutant emissions from this sector are low when natural gas or electricity are the dominant energy sources, as is the case in developed countries. However, in developing countries, people may rely on solid fuels and this sector can contribute a large fraction of emissions. The magnitude of the health loss associated with exposure to indoor smoke as well as its concentration among rural population in developing countries have recently put preventive measures high on the agenda of international development and public health organizations. This study focuses on these developing regions: Central America, Africa, and Asia. Current and future emissions from the residential sector depend on both fuel and cooking device (stove) type. Availability of fuels, stoves, and interventions depends strongly on spatial distribution. However, regional emission calculations do not consider this spatial dependence. Fuel consumption data is presented at country level, without information about where different types of fuel are used. Moreover, information about stove types that are currently used and can be used in the future is not available. In this study, we first spatially allocate current emissions within residential sector. We use Geographic Information System maps of temperature, electricity availability, forest area, and population to determine the distribution of fuel types and availability of stoves. Within each country, consumption of different fuel types, such as fuelwood, coal, and LPG is distributed among different area types (urban, peri-urban, and rural area). Then, the cleanest stove technologies which could be used in the area are selected based on the constraints of each area, i.e. availability of resources. Using this map, the maximum emission reduction compared with current emission in residential sector can be estimated, based on the cleanest plausible fuels and stove availability.

An optimization model to agroindustrial sector in antioquia (Colombia, South America)

NASA Astrophysics Data System (ADS)

Fernandez, J.

2015-06-01

This paper develops a proposal of a general optimization model for the flower industry, which is defined by using discrete simulation and nonlinear optimization, whose mathematical models have been solved by using ProModel simulation tools and Gams optimization. It defines the operations that constitute the production and marketing of the sector, statistically validated data taken directly from each operation through field work, the discrete simulation model of the operations and the linear optimization model of the entire industry chain are raised. The model is solved with the tools described above and presents the results validated in a case study.

South Africa's protracted struggle for equal distribution and equitable access - still not there.

PubMed

van Rensburg, Hendrik C J

2014-05-08

The purpose of this contribution is to analyse and explain the South African HRH case, its historical evolution, and post-apartheid reform initiatives aimed at addressing deficiencies and shortfalls. HRH in South Africa not only mirrors the nature and diversity of challenges globally, but also the strategies pursued by countries to address these challenges. Although South Africa has strongly developed health professions, large numbers of professional and mid-level workers, and also well-established training institutions, it is experiencing serious workforce shortages and access constraints. This results from the unequal distribution of health workers between the well-resourced private sector over the poorly-resourced public sector, as well as from distributional disparities between urban and rural areas. During colonial and apartheid times, disparities were aggravated by policies of racial segregation and exclusion, remnants of which are today still visible in health-professional backlogs, unequal provincial HRH distribution, and differential access to health services for specific race and class groups. Since 1994, South Africa's transition to democracy deeply transformed the health system, health professions and HRH establishments. The introduction of free-health policies, the district health system and the prioritisation of PHC ensured more equal distribution of the workforce, as well as greater access to services for deprived groups. However, the HIV/AIDS epidemic brought about huge demands for care and massive patient loads in the public-sector. The emigration of health professionals to developed countries and to the private sector also undermines the strength and effectiveness of the public health sector. For the poor, access to care thus remains constrained and in perpetual shortfall. The post-1994 government has introduced several HRH-specific strategies to recruit, distribute, motivate and retain health professionals to strengthen the public sector and to expand access and coverage. Of great significance among these is the NHI Plan that aims to bridge the structural divide and to redistribute material and human resources more equally. Its success largely hinges on HRH and the balanced deployment of the national workforce.Low- and middle-income countries have much to learn from South African HRH experiences. In turn, South Africa has much to learn from other countries, as this case study shows.

Tight focusing properties of the azimuthal discrete phase modulated radially polarized LG11* beam

NASA Astrophysics Data System (ADS)

Zhao, Jiang; Li, Bo; Zhao, Heng; Hu, Yi; Wang, Wenjin; Wang, Youqing

2013-06-01

An novel method for generating an annual periodic optical chain by tight focusing the rotational symmetric π/0 phase plate modulated first order radially polarized Laguerre Gaussian (LG11*) beam with a high-NA lens is proposed. The optical chain is composed of either bright spots or dark spots. Vector diffraction numerical calculation method is employed to analyze the tight focus properties. The analyses indicate that the properties of the optical chains are closely related to the number of phase plate sectors, beam width of radially polarized LG11* beam and the numerical aperture of focusing lens. Furthermore, the average Full Width at Half Maximum (FWHM) of hollow dark spots or bright spots in optical chain is breaking the diffraction limit. These kinds of annular optical chains are expected to be applied in trapping or arranging multiple bar-like micro particles whose refractive index are either higher or lower than that of the ambient.

Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

PubMed

Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

Live-cell and super-resolution imaging reveal that the distribution of wall-associated protein A is correlated with the cell chain integrity of Streptococcus mutans.

PubMed

Li, Y; Liu, Z; Zhang, Y; Su, Q P; Xue, B; Shao, S; Zhu, Y; Xu, X; Wei, S; Sun, Y

2015-10-01

Streptococcus mutans is a primary pathogen responsible for dental caries. It has an outstanding ability to form biofilm, which is vital for virulence. Previous studies have shown that knockout of Wall-associated protein A (WapA) affects cell chain and biofilm formation of S. mutans. As a surface protein, the distribution of WapA remains unknown, but it is important to understand the mechanism underlying the function of WapA. This study applied the fluorescence protein mCherry as a reporter gene to characterize the dynamic distribution of WapA in S. mutans via time-lapse and super-resolution fluorescence imaging. The results revealed interesting subcellular distribution patterns of WapA in single, dividing and long chains of S. mutans cells. It appears at the middle of the cell and moves to the poles as the cell grows and divides. In a cell chain, after each round of cell division, such dynamic relocation results in WapA distribution at the previous cell division sites, resulting in a pattern where WapA is located at the boundary of two adjacent cell pairs. This WapA distribution pattern corresponds to the breaking segmentation of wapA deletion cell chains. The dynamic relocation of WapA through the cell cycle increases our understanding of the mechanism of WapA in maintaining cell chain integrity and biofilm formation. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Thermodynamic accounting of ecosystem contribution to economic sectors with application to 1992 U.S. economy.

PubMed

Ukidwe, Nandan U; Bakshi, Bhavik R

2004-09-15

Incorporation of ecological considerations in decision-making is essential for sustainable development, but is hindered by inadequate appreciation of the role of ecosystems, and lack of scientifically rigorous techniques for including their contribution. This paper develops a novel thermodynamic accounting framework for including the contribution of natural capital via thermodynamic input-output analysis. This framework is applied to the 1992 US economy comprising 91 industry sectors, resulting in delineation of the myriad ways in which sectors of the US economy rely on ecosystem products and services. The contribution of ecosystems is represented via the concept of ecological cumulative exergy consumption (ECEC), which is related to emergy analysis but avoids any of its controversial assumptions and claims. The use of thermodynamics permits representation of all kinds of inputs and outputs in consistent units, facilitating the definition of aggregate metrics. Total ECEC requirement indicates the extent to which each economic sector relies directly and indirectly on ecological inputs. The ECEC/money ratio indicates the relative monetary versus ecological throughputs in each sector, and indicates the relationship between the thermodynamic work needed to produce a product or service and the corresponding economic activity. This ratio is found to decrease along economic supply chains, indicating industries that are higher up in the economic food chain price ecosystem contribution more than the basic infrastructure industries such as mining and manufacturing. The ratio of CEC with and without inclusion of ecosystems indicates the extent to which conventional thermoeconomic analysis underestimates the contribution of ecosystems. Such ratios, made available for the first time, provide unique insight into the importance of natural capital, and are especially useful in hybrid thermodynamic life cycle analysis of industrial systems. The approach, data compiled in this work, and the resulting insight provide a more ecologically conscious tool for environmental decision-making, and has potential applications at micro as well as macro scales.

Google matrix of the world network of economic activities

NASA Astrophysics Data System (ADS)

Kandiah, Vivek; Escaith, Hubert; Shepelyansky, Dima L.

2015-07-01

Using the new data from the OECD-WTO world network of economic activities we construct the Google matrix G of this directed network and perform its detailed analysis. The network contains 58 countries and 37 activity sectors for years 1995 and 2008. The construction of G, based on Markov chain transitions, treats all countries on equal democratic grounds while the contribution of activity sectors is proportional to their exchange monetary volume. The Google matrix analysis allows to obtain reliable ranking of countries and activity sectors and to determine the sensitivity of CheiRank-PageRank commercial balance of countries in respect to price variations and labor cost in various countries. We demonstrate that the developed approach takes into account multiplicity of network links with economy interactions between countries and activity sectors thus being more efficient compared to the usual export-import analysis. The spectrum and eigenstates of G are also analyzed being related to specific activity communities of countries.

The Expanding Role of Traceability in Seafood: Tools and Key Initiatives.

PubMed

Lewis, Sara G; Boyle, Mariah

2017-08-01

In the last decade, a range of drivers within the seafood sector have incentivized the application of traceability to issues beyond food safety and inventory management. Some of the issues motivating the expanded use of traceability within the global seafood sector include: increased media attention on the legal and social risks within some seafood supply chains, governmental traceability requirements, private-sector sustainability commitments, and others. This article begins with an overview of these topics in the seafood industry, and why many nongovernment organizations (NGOs), companies, and government actors have turned to traceability as a tool to address them. We discuss how traceability connects to key requirements of environmental sustainability and social responsibility. Later, we review the range of traceability services, tools, software solutions, and the due diligence measures that are currently being leveraged within the seafood sector. The paper concludes with a discussion of several NGO- and industry-led traceability initiatives that are examples of seafood traceability improvements. © 2017 Institute of Food Technologists®.

Managing meat tenderness.

PubMed

Thompson, John

2002-11-01

This paper discusses the management of meat tenderness using a carcass grading scheme which utilizes the concept of total quality management of those factors which impact on beef palatability. The scheme called Meat Standards Australia (MSA) has identified the Critical Control Points (CCPs) from the production, pre-slaughter, processing and value adding sectors of the beef supply chain and quantified their relative importance using large-scale consumer testing. These CCPs have been used to manage beef palatability in two ways. Firstly, CCPs from the pre-slaughter and processing sectors have been used as mandatory criteria for carcasses to be graded. Secondly, other CCPs from the production and processing sectors have been incorporated into a model to predict palatability for individual muscles. The evidence for the importance of CCPs from the production (breed, growth path and HGP implants), pre-slaughter and processing (pH/temperature window, alternative carcass suspension, marbling and ageing) sectors are reviewed and the accuracy of the model to predict palatability for specific muscle×cooking techniques is presented.

Technical efficiency gains from port reform : the potential for yardstick competition in Mexico

DOT National Transportation Integrated Search

2001-07-17

Ports are one of the key components of the logistics chain and, this is why the desire to cut costs in the sector is becoming a mainstream component of most transport policy reforms. The most common instrument relied on is the introduction of some ty...

Links in the Chain: Bringing Together Literacy and Science

ERIC Educational Resources Information Center

Taylor, Neil; Hansford, Diane; Rizk, Nadya; Taylor, Subhashni

2017-01-01

In Australia, the Federal Government and the Australian Academy of Science have developed a programme entitled "Primary Connections" (primaryconnections.org. au), aimed at supporting the teaching of science in the primary sector. The programme makes strong and explicit links between science and literacy through the use of word walls,…

Cold chain management in meat storage, distribution and retail: A review

NASA Astrophysics Data System (ADS)

Nastasijević, I.; Lakićević, B.; Petrović, Z.

2017-09-01

Meat is a perishable product with a short shelf life and therefore short selling times. Therefore, cold chain management in meat supply is of utmost importance for the maintenance of quality and safety of meat/meat products. Raw meat/meat products are likely to support the growth of pathogenic microorganisms and/or spoilage bacteria, and should be kept at temperatures that do not result in a risk to health. The cold chain should not be interrupted at all times along the meat distribution chain. The complexity of global meat supply chain, with frequently long distribution chains associated with transportation of the product within one country, from one to another country and from one to another continent, makes the solutions for the chilling and freezing regimes, as well as monitoring of time-temperature profiles, very important for the overall success in delivery of product which will be accepted by consumer for its freshness and safety levels. From recently, there are several available options for control and management of the cold chain, such as chilled and frozen storage combinations, superchilling, ionizing radiation, biopreservation, high hydrostatic pressure (HHP), active packaging, wireless sensors, supported with the software-based cold chain database (CCD).

The Seven Challenges for Transitioning into a Bio-based Circular Economy in the Agri-food Sector.

PubMed

Borrello, Massimiliano; Lombardi, Alessia; Pascucci, Stefano; Cembalo, Luigi

2016-01-01

Closed-loop agri-food supply chains have a high potential to reduce environmental and economic costs resulting from food waste disposal. This paper illustrates an alternative to the traditional supply chain of bread based on the principles of a circular economy. Six circular interactions among seven actors (grain farmers, bread producers, retailers, compostable packaging manufacturers, insect breeders, livestock farmers, consumers) of the circular filière are created in order to achieve the goal of "zero waste". In the model, two radical technological innovations are considered: insects used as animal feed and polylactic acid compostable packaging. The main challenges for the implementation of the new supply chain are identified. Finally, some recent patents related to bread sustainable production, investigated in the current paper, are considered. Recommendations are given to academics and practitioners interested in the bio-based circular economy model approach for transforming agri-food supply chains.

Carbon footprint as an instrument for enhancing food quality: overview of the wine, olive oil and cereals sectors.

PubMed

Pattara, Claudio; Russo, Carlo; Antrodicchia, Vittoria; Cichelli, Angelo

2017-01-01

The quantification of greenhouse gases (GHG) emissions represents a critical issue for the future development of agro-food produces. Consumers' behaviour could play an important role in requiring environmental performance as an essential element for food quality. Nowadays, the carbon footprint (CFP) is a tool used worldwide by agro-food industries to communicate environmental information. This paper aims to investigate the role that CFP could have in consumers' choices in three significant agro-food sectors in the Mediterranean area: wine, olive oil and cereals. A critical review about the use of CFP was carried out along the supply chain of these three sectors, in order to identify opportunities for enhancing food quality and environmental sustainability and highlighting how environmental information could influence consumers' preferences. The analysis of the state of the art shows a great variability of the results about GHG emissions referred to agricultural and industrial processes. In many cases, the main environmental criticisms are linked to the agricultural phase, but the other phases of the supply chain could also contribute to the increased CFP. However, despite the wide use of CFP by companies as a communication tool to help consumers' choices in agro-food products, some improvements are needed in order to provide clearer and more understandable information. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Late Miocene remagnetization within the internal sector of the Northern Apennines, Italy

USGS Publications Warehouse

Aiello, I.W.; Hagstrum, J.T.; Principi, G.

2004-01-01

Paleomagnetic and geologic evidence indicates that Upper Jurassic radiolarian cherts of both the Tuscan Cherts Formation (continental margin, Tuscan Units) and the Monte Alpe Cherts Formation (oceanic crust, Ligurian Units) were remagnetized during Miocene orogenesis of the Northern Apennines of Italy. Characteristic overprint magnetizations with reversed polarities have been found over a large area within the internal sector of the Northern Apennines, including eastern Liguria, Elba Island and the Thyrrenian margin, and west of the Middle Tuscan Ridge. The reversed-polarity overprint (average direction: D=177??, I=-52??, ??95=15??) was most likely acquired during Late Miocene uplift and denudation of the orogenic chain, and thermochemical remagnetization was a probable consequence of increased circulation of orogenic fluids. Similarly, mostly reversed-polarity directions of magnetization have been found by other workers in overlying post-orogenic Messinian sediments (D=177??, I=-57??, ??95=3??), which show little counterclockwise (CCW) vertical-axis rotation with respect to stable Europe (-8??5??). The Monte Alpe Cherts sampled at sites in the external sector of the Northern Apennines, close to major tectonic features, have normal- polarity overprint directions with in situ W-SW declinations. Since the overlying post-orogenic Messinian sediments have not been substantially rotated about vertical axes, the evidence points to an earlier,pre-Late Miocene remagnetization in the external parts of the orogenic chain. ?? 2004 Elsevier B.V. All rights reserved.

Value Chains of Public and Private Health-care Services in a Small EU Island State: A SWOT Analysis

PubMed Central

Buttigieg, Sandra C.; Schuetz, Marcus; Bezzina, Frank

2016-01-01

The global financial and macroeconomic crisis of 2008/2009 and the ensuing recessions obliged policy makers to maximize use of resources and cut down on waste. Specifically, in health care, governments started to explore ways of establishing collaborations between the public and private health-care sectors. This is essential so as to ensure the best use of available resources, while securing quality of delivery of care as well as health systems sustainability and resilience. This qualitative study explores complementary and mutual attributes in the value creation process to patients by the public and private health-care systems in Malta, a small European Union island state. A workshop was conducted with 28 professionals from both sectors to generate two separate value chains, and this was followed by an analysis of strengths, weaknesses, opportunities, and threats (SWOT). The latter revealed several strengths and opportunities, which can better equip health-policy makers in the quest to maximize provision of health-care services. Moreover, the analysis also highlighted areas of weaknesses in both sectors as well as current threats of the external environment that, unless addressed, may threaten the state’s health-care system sustainability and resilience to macroeconomic shocks. The study goes on to provide feasible recommendations aimed at maximizing provision of health-care services in Malta. PMID:27683658

Primitive-path statistics of entangled polymers: mapping multi-chain simulations onto single-chain mean-field models

NASA Astrophysics Data System (ADS)

Steenbakkers, Rudi J. A.; Tzoumanekas, Christos; Li, Ying; Liu, Wing Kam; Kröger, Martin; Schieber, Jay D.

2014-01-01

We present a method to map the full equilibrium distribution of the primitive-path (PP) length, obtained from multi-chain simulations of polymer melts, onto a single-chain mean-field ‘target’ model. Most previous works used the Doi-Edwards tube model as a target. However, the average number of monomers per PP segment, obtained from multi-chain PP networks, has consistently shown a discrepancy of a factor of two with respect to tube-model estimates. Part of the problem is that the tube model neglects fluctuations in the lengths of PP segments, the number of entanglements per chain and the distribution of monomers among PP segments, while all these fluctuations are observed in multi-chain simulations. Here we use a recently proposed slip-link model, which includes fluctuations in all these variables as well as in the spatial positions of the entanglements. This turns out to be essential to obtain qualitative and quantitative agreement with the equilibrium PP-length distribution obtained from multi-chain simulations. By fitting this distribution, we are able to determine two of the three parameters of the model, which govern its equilibrium properties. This mapping is executed for four different linear polymers and for different molecular weights. The two parameters are found to depend on chemistry, but not on molecular weight. The model predicts a constant plateau modulus minus a correction inversely proportional to molecular weight. The value for well-entangled chains, with the parameters determined ab initio, lies in the range of experimental data for the materials investigated.

The Social Security Program and the Private Sector Alternative: Lessons from History.

ERIC Educational Resources Information Center

Quadagno, Jill

1987-01-01

Used historical evidence to analyze how private sector benefits worked in the past in light of the debate surrounding the Social Security benefits and the federal deficit. Among conclusions reached are that the private sector failed to provide adequate protection for older citizens, and that benefits were inequitably distributed on basis of gender…

Distributed Leadership: A Collaborative Framework for Academics, Executives and Professionals in Higher Education

ERIC Educational Resources Information Center

Jones, Sandra; Lefoe, Geraldine; Harvey, Marina; Ryland, Kevin

2012-01-01

New models of leadership are needed for the higher education sector to continue to graduate students with leading edge capabilities. While multiple theories of leadership exist, the higher education sector requires a less hierarchical approach that takes account of its specialised and professional context. Over the last decade the sector has…

Limiting Distributions of Functionals of Markov Chains.

DTIC Science & Technology

1984-08-01

limiting distributions; periodic * nonhomoger.,!ous Poisson processes . 19 ANS? MACY IConuui oe nonoe’ee if necorglooy and edern thty by block numbers...homogeneous Poisson processes is of interest in itself. The problem considered in this paper is of interest in the theory of partially observable...where we obtain the limiting distribution of the interevent times. Key Words: Markov Chains, Limiting Distributions, Periodic Nonhomogeneous Poisson

Entropies of negative incomes, Pareto-distributed loss, and financial crises.

PubMed

Gao, Jianbo; Hu, Jing; Mao, Xiang; Zhou, Mi; Gurbaxani, Brian; Lin, Johnny

2011-01-01

Health monitoring of world economy is an important issue, especially in a time of profound economic difficulty world-wide. The most important aspect of health monitoring is to accurately predict economic downturns. To gain insights into how economic crises develop, we present two metrics, positive and negative income entropy and distribution analysis, to analyze the collective "spatial" and temporal dynamics of companies in nine sectors of the world economy over a 19 year period from 1990-2008. These metrics provide accurate predictive skill with a very low false-positive rate in predicting downturns. The new metrics also provide evidence of phase transition-like behavior prior to the onset of recessions. Such a transition occurs when negative pretax incomes prior to or during economic recessions transition from a thin-tailed exponential distribution to the higher entropy Pareto distribution, and develop even heavier tails than those of the positive pretax incomes. These features propagate from the crisis initiating sector of the economy to other sectors.

Expected distributions of root-mean-square positional deviations in proteins.

PubMed

Pitera, Jed W

2014-06-19

The atom positional root-mean-square deviation (RMSD) is a standard tool for comparing the similarity of two molecular structures. It is used to characterize the quality of biomolecular simulations, to cluster conformations, and as a reaction coordinate for conformational changes. This work presents an approximate analytic form for the expected distribution of RMSD values for a protein or polymer fluctuating about a stable native structure. The mean and maximum of the expected distribution are independent of chain length for long chains and linearly proportional to the average atom positional root-mean-square fluctuations (RMSF). To approximate the RMSD distribution for random-coil or unfolded ensembles, numerical distributions of RMSD were generated for ensembles of self-avoiding and non-self-avoiding random walks. In both cases, for all reference structures tested for chains more than three monomers long, the distributions have a maximum distant from the origin with a power-law dependence on chain length. The purely entropic nature of this result implies that care must be taken when interpreting stable high-RMSD regions of the free-energy landscape as "intermediates" or well-defined stable states.

Practices associated with Highly Pathogenic Avian Influenza spread in traditional poultry marketing chains: Social and economic perspectives.

PubMed

Paul, Mathilde; Baritaux, Virginie; Wongnarkpet, Sirichai; Poolkhet, Chaithep; Thanapongtharm, Weerapong; Roger, François; Bonnet, Pascal; Ducrot, Christian

2013-04-01

In developing countries, smallholder poultry production contributes to food security and poverty alleviation in rural areas. However, traditional poultry marketing chains have been threatened by the epidemics caused by the Highly Pathogenic Avian Influenza (H5N1) virus. The article presents a value chain analysis conducted on the traditional poultry marketing chain in the rural province of Phitsanulok, Thailand. The analysis is based on quantitative data collected on 470 backyard chicken farms, and on qualitative data collected on 28 poultry collectors, slaughterhouses and market retailers, using semi-structured interviews. The article examines the organization of poultry marketing chains in time and space, and shows how this may contribute to the spread of Highly Pathogenic Avian Influenza H5N1 in the small-scale poultry sector. The article also discusses the practices and strategies developed by value chain actors facing poultry mortality, with their economic and social determinants. More broadly, this study also illustrates how value chain analysis can contribute to a better understanding of the complex mechanisms associated with the spread of epidemics in rural communities. Copyright © 2013 Elsevier B.V. All rights reserved.

Enlarged symmetry algebras of spin chains, loop models, and S-matrices

NASA Astrophysics Data System (ADS)

Read, N.; Saleur, H.

2007-08-01

The symmetry algebras of certain families of quantum spin chains are considered in detail. The simplest examples possess m states per site ( m⩾2), with nearest-neighbor interactions with U(m) symmetry, under which the sites transform alternately along the chain in the fundamental m and its conjugate representation m¯. We find that these spin chains, even with arbitrary coefficients of these interactions, have a symmetry algebra A much larger than U(m), which implies that the energy eigenstates fall into sectors that for open chains (i.e., free boundary conditions) can be labeled by j=0,1,…,L, for the 2 L-site chain such that the degeneracies of all eigenvalues in the jth sector are generically the same and increase rapidly with j. For large j, these degeneracies are much larger than those that would be expected from the U(m) symmetry alone. The enlarged symmetry algebra A(2L) consists of operators that commute in this space of states with the Temperley-Lieb algebra that is generated by the set of nearest-neighbor interaction terms; A(2L) is not a Yangian. There are similar results for supersymmetric chains with gl(m+n|n) symmetry of nearest-neighbor interactions, and a richer representation structure for closed chains (i.e., periodic boundary conditions). The symmetries also apply to the loop models that can be obtained from the spin chains in a spacetime or transfer matrix picture. In the loop language, the symmetries arise because the loops cannot cross. We further define tensor products of representations (for the open chains) by joining chains end to end. The fusion rules for decomposing the tensor product of representations labeled j and j take the same form as the Clebsch-Gordan series for SU(2). This and other structures turn the symmetry algebra A into a ribbon Hopf algebra, and we show that this is "Morita equivalent" to the quantum group U(sl) for m=q+q. The open-chain results are extended to the cases |m|<2 for which the algebras are no longer semisimple; these possess continuum limits that are critical (conformal) field theories, or massive perturbations thereof. Such models, for open and closed boundary conditions, arise in connection with disordered fermions, percolation, and polymers (self-avoiding walks), and certain non-linear sigma models, all in two dimensions. A product operation is defined in a related way for the Temperley-Lieb representations also, and the fusion rules for this are related to those for A or U(sl) representations; this is useful for the continuum limits also, as we discuss in a companion paper.

Phase distribution and flow mechanism in an amphibolite facies ultramylonite

NASA Astrophysics Data System (ADS)

Kilian, Rüdiger

2014-05-01

Rocks deforming by diffusion creep, are usually characterized by a small grain size, a weak or no crystallographic preferred orientation and an anti-correlated phase distribution of which the latter gives the most revealing insight into the active deformation mechanism. The present study focuses on the phase distribution in an amphibolite facies ultramylonite from a several meters wide shear zone within the Nordmannvik Nappe of the Norwegian Caledonides. In the shear zone, a granulite facies protolith is transformed to a fine grained matrix of quartz (50%), biotite (20%), white mica (20%), oligoclase (7%) and ilmenite/titanite with grain sizes below 10 μm (eq. diameter). Large grains of garnet, white mica and plagioclase form porphyroclasts. At high matrix proportions white mica and plagioclase porphyroclasts are less abundant. The matrix shows a homogeneous fabric and shows a strong anti-correlation of phases. Quartz forms single grains or clusters, which are at most a few grains thick, with a long axis inclined at 30 - 60° to the foliation, antithetic to the sense of shear. Quartz clusters have a regular spacing of ~30 μm, separated by biotite-stacks and oligoclase. White mica forms parallel to the foliation and replaces longer biotite grains (during shearing of the mica). Concurrently new biotite grows at those quartz grain boundaries, which are oriented at a high angle to the foliation. Only adjacent to porphyroclasts, the matrix homogeneity is disturbed. Biotite and plagioclase are depleted in the compressional sector and grow in the extensional sector. Correspondingly, garnet porphyroclasts have newly grown Ca-rich rims in compressional sectors and signs of dissolution in extensional ones. Thermodynamic modeling suggests that the modal composition of the matrix and the Ca-rich garnet rims form the stable assemblage. The microstructural positions of the phases can be related to the kinematics of granular flow. The alignment of quartz grains into clusters subparallel to the inferred shortening direction can be compared to the dynamic formation of force chains permitting high and low pressure sites in the matrix, similarly observed in numerical models of granular flow (e.g. Deubelbeiss et al., 2011). Biotite + oligoclase occupy sites of locally lower pressure and garnet rims + white mica those of higher pressure. It is suggested that a cyclic reaction of garnet + white mica = plagioclase + biotite, driven by dynamically changing, local gradients, causes the distribution of phases by nucleation, growth and mutual replacement during granular flow. Additionally, straining of biotite might contribute to its replacement by white mica. Deubelbeiss, Y., B. J. P. Kaus, J. A. D. Connolly, and L. Caricchi (2011), Potential causes for the non-Newtonian rheology of crystal-bearing magmas, Geochem. Geophys. Geosyst., 12, Q05007, doi:10.1029/2010GC003485.

Mean-field calculations of chain packing and conformational statistics in lipid bilayers: comparison with experiments and molecular dynamics studies.

PubMed Central

Fattal, D R; Ben-Shaul, A

1994-01-01

A molecular, mean-field theory of chain packing statistics in aggregates of amphiphilic molecules is applied to calculate the conformational properties of the lipid chains comprising the hydrophobic cores of dipalmitoyl-phosphatidylcholine (DPPC), dioleoyl-phosphatidylcholine (DOPC), and palmitoyl-oleoyl-phosphatidylcholine (POPC) bilayers in their fluid state. The central quantity in this theory, the probability distribution of chain conformations, is evaluated by minimizing the free energy of the bilayer assuming only that the segment density within the hydrophobic region is uniform (liquidlike). Using this distribution we calculate chain conformational properties such as bond orientational order parameters and spatial distributions of the various chain segments. The lipid chains, both the saturated palmitoyl (-(CH2)14-CH3) and the unsaturated oleoyl (-(CH2)7-CH = CH-(CH2)7-CH3) chains are modeled using rotational isomeric state schemes. All possible chain conformations are enumerated and their statistical weights are determined by the self-consistency equations expressing the condition of uniform density. The hydrophobic core of the DPPC bilayer is treated as composed of single (palmitoyl) chain amphiphiles, i.e., the interactions between chains originating from the same lipid headgroup are assumed to be the same as those between chains belonging to different molecules. Similarly, the DOPC system is treated as a bilayer of oleoyl chains. The POPC bilayer is modeled as an equimolar mixture of palmitoyl and oleoyl chains. Bond orientational order parameter profiles, and segment spatial distributions are calculated for the three systems above, for several values of the bilayer thickness (or, equivalently, average area/headgroup) chosen, where possible, so as to allow for comparisons with available experimental data and/or molecular dynamics simulations. In most cases the agreement between the mean-field calculations, which are relatively easy to perform, and the experimental and simulation data is very good, supporting their use as an efficient tool for analyzing a variety of systems subject to varying conditions (e.g., bilayers of different compositions or thicknesses at different temperatures). PMID:7811955

Huntingtin-interacting protein 1 (Hip1) and Hip1-related protein (Hip1R) bind the conserved sequence of clathrin light chains and thereby influence clathrin assembly in vitro and actin distribution in vivo.

PubMed

Chen, Chih-Ying; Brodsky, Frances M

2005-02-18

Clathrin heavy and light chains form triskelia, which assemble into polyhedral coats of membrane vesicles that mediate transport for endocytosis and organelle biogenesis. Light chain subunits regulate clathrin assembly in vitro by suppressing spontaneous self-assembly of the heavy chains. The residues that play this regulatory role are at the N terminus of a conserved 22-amino acid sequence that is shared by all vertebrate light chains. Here we show that these regulatory residues and others in the conserved sequence mediate light chain interaction with Hip1 and Hip1R. These related proteins were previously found to be enriched in clathrin-coated vesicles and to promote clathrin assembly in vitro. We demonstrate Hip1R binding preference for light chains associated with clathrin heavy chain and show that Hip1R stimulation of clathrin assembly in vitro is blocked by mutations in the conserved sequence of light chains that abolish interaction with Hip1 and Hip1R. In vivo overexpression of a fragment of clathrin light chain comprising the Hip1R-binding region affected cellular actin distribution. Together these results suggest that the roles of Hip1 and Hip1R in affecting clathrin assembly and actin distribution are mediated by their interaction with the conserved sequence of clathrin light chains.

Follow that fish: Uncovering the hidden blue economy in coral reef fisheries.

PubMed

Grafeld, Shanna; Oleson, Kirsten L L; Teneva, Lida; Kittinger, John N

2017-01-01

Despite their importance for human well-being, nearshore fisheries are often data poor, undervalued, and underappreciated in policy and development programs. We assess the value chain for nearshore Hawaiian coral reef fisheries, mapping post-catch distribution and disposition, and quantifying associated monetary, food security, and cultural values. We estimate that the total annual value of the nearshore fishery in Hawai'i is $10.3-$16.4 million, composed of non-commercial ($7.2-$12.9 million) and commercial ($2.97 million licensed + $148,500-$445,500 unlicensed) catch. Hawaii's nearshore fisheries provide >7 million meals annually, with most (>5 million) from the non-commercial sector. Over a third (36%) of meals were planktivores, 26% piscivores, 21% primary consumers, and 18% secondary consumers. Only 62% of licensed commercial catch is accounted for in purchase reports, leaving 38% of landings unreported in sales. Value chains are complex, with major buyers for the commercial fishery including grocery stores (66%), retailers (19%), wholesalers (14%), and restaurants (<1%), who also trade and sell amongst themselves. The bulk of total nearshore catch (72-74%) follows a short value chain, with non-commercial fishers keeping catch for household consumption or community sharing. A small amount (~37,000kg) of reef fish-the equivalent of 1.8% of local catch-is imported annually into Hawai'i, 23,000kg of which arrives as passenger luggage on commercial flights from Micronesia. Evidence of exports to the US mainland exists, but is unquantifiable given existing data. Hawaiian nearshore fisheries support fundamental cultural values including subsistence, activity, traditional knowledge, and social cohesion. These small-scale coral reef fisheries provide large-scale benefits to the economy, food security, and cultural practices of Hawai'i, underscoring the need for sustainable management. This research highlights the value of information on the value chain for small-scale production systems, making the hidden economy of these fisheries visible and illuminating a range of conservation interventions applicable to Hawai'i and beyond.

The Packing of Helical and Zigzag Chains and Distribution of Interstitial Voids in Expanded Liquid Se near the Semiconductor to Metal Transition

NASA Astrophysics Data System (ADS)

Maruyama, Kenji; Hiroi (Sato), Satoshi; Endo, Hirohisa; Hoshino, Hideoki; Odagaki, Takashi; Hensel, Friedrich

2017-08-01

The reverse Monte Carlo (RMC) and Voronoi-Delaunay (VD) void analyses were applied to study the modification of chain geometries near the semiconductor (SC) to metal (M) transition in expanded liquid Se along the isochore of d = 3.4 g/cm3. Fluctuations of dihedral angles with increasing temperature and pressure cause modification of the helical (H) chain to the planar zigzag (Z) chain conformations. The distribution of voids size (rV ) supported by chain segments and distances to the 4th 6th neighbor atoms on the chain segments provide information on the stacking of planar zigzag chains compensated by empty space (L-voids, rV 3.6 Å) which leads to the formation of metallic domains. Near SC-M transition region the number fraction NZ/NH for Z and H chain segments increases.

Extreme event statistics in a drifting Markov chain

NASA Astrophysics Data System (ADS)

Kindermann, Farina; Hohmann, Michael; Lausch, Tobias; Mayer, Daniel; Schmidt, Felix; Widera, Artur

2017-07-01

We analyze extreme event statistics of experimentally realized Markov chains with various drifts. Our Markov chains are individual trajectories of a single atom diffusing in a one-dimensional periodic potential. Based on more than 500 individual atomic traces we verify the applicability of the Sparre Andersen theorem to our system despite the presence of a drift. We present detailed analysis of four different rare-event statistics for our system: the distributions of extreme values, of record values, of extreme value occurrence in the chain, and of the number of records in the chain. We observe that, for our data, the shape of the extreme event distributions is dominated by the underlying exponential distance distribution extracted from the atomic traces. Furthermore, we find that even small drifts influence the statistics of extreme events and record values, which is supported by numerical simulations, and we identify cases in which the drift can be determined without information about the underlying random variable distributions. Our results facilitate the use of extreme event statistics as a signal for small drifts in correlated trajectories.

Globalization and pollution: tele-connecting local primary PM2.5 emissions to global consumption.

PubMed

Meng, Jing; Liu, Junfeng; Xu, Yuan; Guan, Dabo; Liu, Zhu; Huang, Ye; Tao, Shu

2016-11-01

Globalization pushes production and consumption to geographically diverse locations and generates a variety of sizeable opportunities and challenges. The distribution and associated effects of short-lived primary fine particulate matter (PM 2.5 ), a representative of local pollution, are significantly affected by the consumption through global supply chain. Tele-connection is used here to represent the link between production and consumption activity at large distances. In this study, we develop a global consumption-based primary PM 2.5 emission inventory to track primary PM 2.5 emissions embodied in the supply chain and evaluate the extent to which local PM 2.5 emissions are triggered by international trade. We further adopt consumption-based accounting and identify the global original source that produced the emissions. We find that anthropogenic PM 2.5 emissions from industrial sectors accounted for 24 Tg globally in 2007; approximately 30% (7.2 Tg) of these emissions were embodied in export of products principally from Brazil, South Africa, India and China (3.8 Tg) to developed countries. Large differences (up to 10 times) in the embodied emissions intensity between net importers and exporters greatly increased total global PM 2.5 emissions. Tele-connecting production and consumption activity provides valuable insights with respect to mitigating long-range transboundary air pollution and prompts concerted efforts aiming at more environmentally conscious globalization.

Globalization and pollution: tele-connecting local primary PM2.5 emissions to global consumption

NASA Astrophysics Data System (ADS)

Meng, Jing; Liu, Junfeng; Xu, Yuan; Guan, Dabo; Liu, Zhu; Huang, Ye; Tao, Shu

2016-11-01

Globalization pushes production and consumption to geographically diverse locations and generates a variety of sizeable opportunities and challenges. The distribution and associated effects of short-lived primary fine particulate matter (PM2.5), a representative of local pollution, are significantly affected by the consumption through global supply chain. Tele-connection is used here to represent the link between production and consumption activity at large distances. In this study, we develop a global consumption-based primary PM2.5 emission inventory to track primary PM2.5 emissions embodied in the supply chain and evaluate the extent to which local PM2.5 emissions are triggered by international trade. We further adopt consumption-based accounting and identify the global original source that produced the emissions. We find that anthropogenic PM2.5 emissions from industrial sectors accounted for 24 Tg globally in 2007; approximately 30% (7.2 Tg) of these emissions were embodied in export of products principally from Brazil, South Africa, India and China (3.8 Tg) to developed countries. Large differences (up to 10 times) in the embodied emissions intensity between net importers and exporters greatly increased total global PM2.5 emissions. Tele-connecting production and consumption activity provides valuable insights with respect to mitigating long-range transboundary air pollution and prompts concerted efforts aiming at more environmentally conscious globalization.

Visible-Light Actinometry and Intermittent Illumination as Convenient Tools to Study Ru(bpy)3Cl2 Mediated Photoredox Transformations

PubMed Central

Pitre, Spencer P.; McTiernan, Christopher D.; Vine, Wyatt; DiPucchio, Rebecca; Grenier, Michel; Scaiano, Juan C.

2015-01-01

Photoredox catalysis provides many green opportunities for radical-mediated synthetic transformations. However, the determination of the underlying mechanisms has been challenging due to lack of quantitative methods that can be easily implemented in synthetic labs, where this research tends to be centered. We report here on the development, characterization and calibration of a novel actinometer based on the photocatalyst tris(2,2′-bipyridyl)ruthenium(II) chloride (Ru(bpy)3Cl2). By using the same molecule as the photocatalyst and the actinometer, we eliminate problems associated with matching sample spectral distribution, lamp-sample spectral overlap and other problems intrinsic to doing quantitative photochemistry in a laboratory that has little expertise in this area. In order to validate our actinometer system in determining the quantum yield of a Ru(bpy)3Cl2 photosensitized reaction, we test the Ru(bpy)3Cl2 catalyzed oxidation of benzhydrol to benzophenone as a model chain reaction. We also revive the rotating sector method by updating the technique for modern LED technologies and demonstrate how intermittent illumination on the timescale of milliseconds to seconds can help probe a chain reaction, using the benzhydrol to benzophenone oxidation to validate the technique. We envision these methods to have great implications in the field of photoredox catalysis, providing researchers with valuable research tools. PMID:26578341

Globalization and pollution: tele-connecting local primary PM2.5 emissions to global consumption

PubMed Central

Meng, Jing; Xu, Yuan; Guan, Dabo; Liu, Zhu; Huang, Ye; Tao, Shu

2016-01-01

Globalization pushes production and consumption to geographically diverse locations and generates a variety of sizeable opportunities and challenges. The distribution and associated effects of short-lived primary fine particulate matter (PM2.5), a representative of local pollution, are significantly affected by the consumption through global supply chain. Tele-connection is used here to represent the link between production and consumption activity at large distances. In this study, we develop a global consumption-based primary PM2.5 emission inventory to track primary PM2.5 emissions embodied in the supply chain and evaluate the extent to which local PM2.5 emissions are triggered by international trade. We further adopt consumption-based accounting and identify the global original source that produced the emissions. We find that anthropogenic PM2.5 emissions from industrial sectors accounted for 24 Tg globally in 2007; approximately 30% (7.2 Tg) of these emissions were embodied in export of products principally from Brazil, South Africa, India and China (3.8 Tg) to developed countries. Large differences (up to 10 times) in the embodied emissions intensity between net importers and exporters greatly increased total global PM2.5 emissions. Tele-connecting production and consumption activity provides valuable insights with respect to mitigating long-range transboundary air pollution and prompts concerted efforts aiming at more environmentally conscious globalization. PMID:27956874

The Electron Density Features Revealed by the GNSS-Based Radio Tomography in the Different Latitudinal and Longitudinal Sectors of the Ionosphere

NASA Astrophysics Data System (ADS)

Andreeva, Elena; Tereshchenko, Evgeniy; Nazarenko, Marina; Nesterov, Ivan; Kozharin, Maksim; Padokhin, Artem; Tumanova, Yulia

2016-04-01

The ionospheric radio tomography is an efficient method for electron density imaging in the different geographical regions of the world under different space weather conditions. The input for the satellite-based ionospheric radio tomography is provided by the signals that are transmitted from the navigational satellites and recorded by the chains or networks of ground receivers. The low-orbiting (LO) radio tomography employs the 150/400 MHz radio transmissions from the Earth's orbiters (like the Russian Tsikada/Parus and American Transit) flying at a height of ~1000 km above the Earth in the nearly polar orbits. The phases of the signals from a moving satellite which are recorded by the chains of ground receivers oriented along the satellite path form the families of linear integrals of electron density along the satellite-receiver rays that are used as the input data for LORT. The LO tomographic inversion of these data by phase difference method yields the 2D distributions of the ionospheric plasma in the vertical plane containing the receiving chain and the satellite path. LORT provides vertical resolution of 20-30 km and horizontal resolution of 30-40 km. The high-orbiting (HO) radio tomography employs the radio transmissions from the GPS/GLONASS satellites and enables 4D imaging of the ionosphere (3 spatial coordinates and time). HORT has a much wider spatial coverage (almost worldwide) and provides continuous time series of the reconstructions. However, the spatial resolution of HORT is lower (~100 km horizontally with a time step 60-20 min). In the regions with dense receiving networks (Europe, USA, Alaska, Japan), the resolution can be increased to 30-50 km with a time interval of 30-10 min. To date, the extensive RT data collected from the existing RT chains and networks enable a thorough analysis of both the regular and sporadic ionospheric features which are observed systematically or appear spontaneously, whose origin is fairly well understood or requires a dedicated study. We present the examples of the both types of the structures. We show a collection of different ionospheric structures under different space weather conditions: the ionization troughs, with their widely varying shapes, depths, positions, and internal distributions of plasma; isolated spots of the increased or decreased electron density, sharp wall-like density gradients, blobs, wavelike disturbances on different spatiotemporal scales etc. We demonstrate the series of the local isolated irregularities which are observed during both the quiet and disturbed days. We show the examples of the ionospheric plasma distributions strikingly varying during the geomagnetic storms. Some of the RT data are compared to the independent observations by the ionosondes. We also present the examples of RT images comparison with the UV spectroscopy data.

Distribution Free Approach for Coordination of a Supply Chain with Consumer Return

NASA Astrophysics Data System (ADS)

Hu, Jinsong; Xu, Yuanji

Consumer return is considered in a coordination of a supply chain consisting of one manufacturer and one retailer. A distribution free approach is employed to deal with a centralized decision model and a decentralized model which are constructed under the situation with only knowing the demand function's mean and variance, respectively. A markdown money contract is designed to coordinate the supply chain, and it is also proved that the contract can make the supply chain perfectly coordinated. Several numerical examples are given at the end of this paper.

Commissioning the cryogenic system of the first LHC sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Millet, F.; Claudet, S.; Ferlin, G.

2007-12-01

The LHC machine, composed of eight sectors with superconducting magnets and accelerating cavities, requires a complex cryogenic system providing high cooling capacities (18 kW equivalent at 4.5 K and 2.4 W at 1.8 K per sector produced in large cold boxes and distributed via 3.3-km cryogenic transfer lines). After individual reception tests of the cryogenic subsystems (cryogen storages, refrigerators, cryogenic transfer lines and distribution boxes) performed since 2000, the commissioning of the cryogenic system of the first LHC sector has been under way since November 2006. After a brief introduction to the LHC cryogenic system and its specificities, the commissioningmore » is reported detailing the preparation phase (pressure and leak tests, circuit conditioning and flushing), the cool-down sequences including the handling of cryogenic fluids, the magnet powering phase and finally the warm-up. Preliminary conclusions on the commissioning of the first LHC sector will be drawn with the review of the critical points already solved or still pending. The last part of the paper reports on the first operational experience of the LHC cryogenic system in the perspective of the commissioning of the remaining LHC sectors and the beam injection test.« less

Hidden regularity and universal classification of fast side chain motions in proteins

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rajeshwar, Rajitha; Smith, Jeremy C.; Krishnam, Marimuthu

Proteins display characteristic dynamical signatures that appear to be universal across all proteins regardless of topology and size. Here, we systematically characterize the universal features of fast side chain motions in proteins by examining the conformational energy surfaces of individual residues obtained using enhanced sampling molecular dynamics simulation (618 free energy surfaces obtained from 0.94 s MD simulation). The side chain conformational free energy surfaces obtained using the adaptive biasing force (ABF) method for a set of eight proteins with different molecular weights and secondary structures are used to determine the methyl axial NMR order parameters (O axis 2), populationsmore » of side chain rotamer states (ρ), conformational entropies (S conf), probability fluxes, and activation energies for side chain inter-rotameric transitions. The free energy barriers separating side chain rotamer states range from 0.3 to 12 kcal/mol in all proteins and follow a trimodal distribution with an intense peak at ~5 kcal/mol and two shoulders at ~3 and ~7.5 kcal/mol, indicating that some barriers are more favored than others by proteins to maintain a balance between their conformational stability and flexibility. The origin and the influences of the trimodal barrier distribution on the distribution of O axis 2 and the side chain conformational entropy are discussed. A hierarchical grading of rotamer states based on the conformational free energy barriers, entropy, and probability flux reveals three distinct classes of side chains in proteins. A unique nonlinear correlation is established between O axis 2 and the side chain rotamer populations (ρ). In conclusion, the apparent universality in O axis 2 versus correlation, trimodal barrier distribution, and distinct characteristics of three classes of side chains observed among all proteins indicates a hidden regularity (or commonality) in the dynamical heterogeneity of fast side chain motions in proteins.« less

The rise of South-South trade and its effect on global CO2 emissions.

PubMed

Meng, Jing; Mi, Zhifu; Guan, Dabo; Li, Jiashuo; Tao, Shu; Li, Yuan; Feng, Kuishuang; Liu, Junfeng; Liu, Zhu; Wang, Xuejun; Zhang, Qiang; Davis, Steven J

2018-05-14

Economic globalization and concomitant growth in international trade since the late 1990s have profoundly reorganized global production activities and related CO 2 emissions. Here we show trade among developing nations (i.e., South-South trade) has more than doubled between 2004 and 2011, which reflects a new phase of globalization. Some production activities are relocating from China and India to other developing countries, particularly raw materials and intermediate goods production in energy-intensive sectors. In turn, the growth of CO 2 emissions embodied in Chinese exports has slowed or reversed, while the emissions embodied in exports from less-developed regions such as Vietnam and Bangladesh have surged. Although China's emissions may be peaking, ever more complex supply chains are distributing energy-intensive industries and their CO 2 emissions throughout the global South. This trend may seriously undermine international efforts to reduce global emissions that increasingly rely on rallying voluntary contributions of more, smaller, and less-developed nations.

Carbon and water footprint of pork supply chain in Catalonia: From feed to final products.

PubMed

Noya, Isabel; Aldea, Xavier; Gasol, Carles M; González-García, Sara; Amores, Maria José; Colón, Joan; Ponsá, Sergio; Roman, Isabel; Rubio, Miguel A; Casas, Eudald; Moreira, María Teresa; Boschmonart-Rives, Jesús

2016-04-15

A systematic tool to assess the Carbon Footprint (CF) and Water Footprint (WF) of pork production companies was developed and applied to representative Catalan companies. To do so, a cradle-to-gate environmental assessment was carried out by means of the LCA methodology, taking into account all the stages involved in the pork chain, from feed production to the processing of final products, ready for distribution. In this approach, the environmental results are reported based on eight different functional units (FUs) according to the main pork products obtained. With the aim of ensuring the reliability of the results and facilitating the comparison with other available reports, the Product Category Rules (PCR) for Catalan pork sector were also defined as a basis for calculations. The characterization results show fodder production as the main contributor to the global environmental burdens, with contributions higher than 76% regardless the environmental indicator or the life cycle stage considered, which is in agreement with other published data. In contrast, the results in terms of CF and WF lay above the range of values reported elsewhere. However, major discrepancies are mainly due to the differences in the co-products allocation criteria. In this sense, economic/physical allocation and/or system expansion have been mostly considered in literature. In contrast, no allocation was considered appropriate in this study, according to the characteristics of the industries and products under assessment; thus, the major impacts fall on the main product, which derives on comparatively higher environmental burdens. Finally, due to the relevance of fodder production in the overall impact assessment results, strategies to reduce greenhouse gases (GHG) emissions as well as water use associated to this stage were proposed in the pork supply chain. Copyright © 2016 Elsevier Ltd. All rights reserved.

Virtual Water Scarcity Risk to the Global Trade System.

PubMed

Qu, Shen; Liang, Sai; Konar, Megan; Zhu, Zeqi; Chiu, Anthony S F; Jia, Xiaoping; Xu, Ming

2018-01-16

Local water scarcity risk (LWSR, meaning potential economic output losses in water-using sectors due to physical water scarcity) can be transmitted to downstream economies through the globalized supply chains. To understand the vulnerability of the global economy to water scarcity, we examine the impacts of local water scarcity risk on the global trade system from 1995 to 2009. We observe increasingly intensified geographical separation between physical water scarcity and production losses due to water scarcity. We identify top nation-sectors in virtual water scarcity risk (VWSR) exports (indicating local water scarcity risk in each nation transmitted to foreign nations through its exports), including agriculture and utilities in major economies such as China, India, Spain, France, and Turkey. These nation-sectors are critical to the resilience of the global economy to water scarcity. We also identify top nation-sectors in virtual water scarcity risk imports (indicating each nation's vulnerability to foreign water scarcity risk through the global trade system), highlighting their vulnerability to distant water scarcity. Our findings reveal the need for nations to collaboratively manage and conserve water resources, and lay the foundation for firms in high VWSR-importing sectors to develop strategies to mitigate such risk.

Electrification Opportunities in the Transportation Sector and Impact of Residential Charging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muratori, Matteo

This presentation provides an overview of electrification opportunities in the transportation sector and present results of a study assessing the impact of residential charging on residential power demand and electric power distribution infrastructure.

[Risk assessment for food preparation, cooking and service].

PubMed

Cottica, Danilo; Grignani, Elena

2014-01-01

The restaurant and food preparation, cooking and distribution sector includes hotels, restaurants, catering, fast food, ecc. The restaurant and food preparation, cooking and distribution sector form a significant part of the Italian economy; they provide employment for a large number of people, both direct employees as well as part-time and contract staff. In this sector there are many hazards that can lead to a broad range of injuries and/or diseases to the workers. For the safety these hazards principally are slick floors, open flames, high temperature cooking surfaces, steam, knives and other cutting instruments and machineries. For the health: cleaning and disinfecting chemicals substances, cooking fumes and vapors, biological agents, heavy loads handling, thermal comfort, ecc. The paper presents an overview of the hazards in the sector and then make a focus on chemical risks identification and assessment to evaluate the workers' exposure (by skin adsorption and inhalation).

Do doctors have a moral duty to work in the public health sector? Ethical considerations regarding the social obligations of medicine.

PubMed

Aguilera Dreyse, Bernardo; López Gaete, Gonzalo

2017-12-22

This article discusses whether physicians have social obligations and whether these obligations imply a moral duty to work in the public sector. The article focuses on the context of the Chilean health system, which has an unequal distribution of physicians to the detriment of the public sector, thus making the issue a particularly pressing one. After addressing arguments from different ethical theories and some empirical evidence, the article concludes that the physician has some social obligations in relation to a fair distribution of health resources, and that professional excellence should incorporate cultivating virtues related to social justice. In addition, it is argued that the moral duty to work in the public sector can be placed in the context of prima facie obligations which admit exceptions and allow the possibility of conflict with other professional obligations.

Private-Equity Juggernaut Rolls through Higher Education

ERIC Educational Resources Information Center

Blumenstyk, Goldie

2007-01-01

The deluge of money that private-equity investors have been pouring into buyouts of companies in all sectors of the economy is having a growing impact on higher education. Until recently, outside investors were primarily interested in the for-profit college industry, acquiring family-owned colleges and chains of colleges. Now several of those…

Integrating sustainable biofuels and byproducts into forest industry supply chains

Treesearch

Reid Hensen; Maureen Essen; Nathaniel Anderson; Larry Peters; April Kimmerly

2016-01-01

Forest biomass is a promising feedstock for the production of bioenergy, biofuels, and bioproducts because it is renewable and widely available as a byproduct of forest management. Its harvest and use also has the potential to positively impact rural communities, especially those negatively impacted by upheaval in the forest sector.

Biological control of aflatoxins in Africa: current status and potential challenges in the face of climate change

USDA-ARS?s Scientific Manuscript database

Aflatoxin contamination of crops is frequent in warm regions across the globe, including large areas in sub-Saharan Africa. Crop contamination with these dangerous toxins transcends health, food security, and trade sectors. It cuts across the value chain, affecting farmers, traders, markets, and fin...

Bigger Stores, More Stores, or No Stores: Paths of Retail Restructuring in Rural America

ERIC Educational Resources Information Center

Vias, Alexander C.

2004-01-01

Changes such as the development of large international retail chains, retail concentration, locational changes, technological innovation, new labor practices, and the increasing scale of individual stores, have revolutionized the retail sector. This broad restructuring will have profound impacts in rural America because employment in retail is a…

The hardwood chip market in 2005

Treesearch

Peter J. Ince

2005-01-01

The North American Pulp and Paper industry continues to experience challenges and changes much like most other business sectors of the hardwood industry. Marketing policies and the raw material supply chain of pulpwood and chips are being affected. The issues surrounding supply for pulpwood and chips have a broad reach in affecting timber and log purchases, logging...

Can environmental purchasing reduce mercury in U.S. health care?

PubMed Central

Eagan, Patrick D; Kaiser, Barb

2002-01-01

Environmental purchasing represents an innovative approach to mercury control for the health care sector in the United States. The U.S. health care sector creates significant environmental impacts, including the release of toxic substances such as mercury. Our goal in this study was to provide the health care industry with a method of identifying the environmental impacts associated with the products they use. The Health Care Environmental Purchasing Tool (HCEPT) was developed and tested at nine health care facilities in the Great Lakes region of the United States. As a result, more than 1 kg of mercury was removed from four facilities. The complexity of the supply chain inhibits a direct environmental information exchange between health-care decision makers and suppliers. However, a dialogue is starting within the health care supply chain to address environmental issues. The HCEPT has been shown to assist health care facilities with that dialogue by identifying products that have environmental consequences. This promising tool is now available for further experimentation and modification, to facilitate overall environmental improvement, and to provide a systematic method for environmental assessment of health care products. PMID:12204816

Private sector opportunities and threats to achieving malaria elimination in the Greater Mekong Subregion: results from malaria outlet surveys in Cambodia, the Lao PDR, Myanmar, and Thailand.

PubMed

Phok, Sochea; Phanalasy, Saysana; Thein, Si Thu; Likhitsup, Asawin

2017-05-02

The aim of this paper is to review multi-country evidence of private sector adherence to national regulations, guidelines, and quality-assurance standards for malaria case management and to document current coverage of private sector engagement and support through ACTwatch outlet surveys implemented in 2015 and 2016. Over 76,168 outlets were screened, and approximately 6500 interviews were conducted (Cambodia, N = 1303; the Lao People's Democratic Republic (PDR), N = 724; Myanmar, N = 4395; and Thailand, N = 74). There was diversity in the types of private sector outlets providing malaria treatment across countries, and the extent to which they were authorized to test and treat for malaria differed. Among outlets stocking at least one anti-malarial, public sector availability of the first-line treatment for uncomplicated Plasmodium falciparum or Plasmodium vivax malaria was >75%. In the anti-malarial stocking private sector, first-line treatment availability was variable (Cambodia, 70.9%; the Lao PDR, 40.8%; Myanmar P. falciparum = 42.7%, P. vivax = 19.6%; Thailand P. falciparum = 19.6%, P. vivax = 73.3%), as was availability of second-line treatment (the Lao PDR, 74.9%; Thailand, 39.1%; Myanmar, 19.8%; and Cambodia, 0.7%). Treatment not in the National Treatment Guidelines (NTGs) was most common in Myanmar (35.8%) and Cambodia (34.0%), and was typically stocked by the informal sector. The majority of anti-malarials distributed in Cambodia and Myanmar were first-line P. falciparum or P. vivax treatments (90.3% and 77.1%, respectively), however, 8.8% of the market share in Cambodia was treatment not in the NTGs (namely chloroquine) and 17.6% in Myanmar (namely oral artemisinin monotherapy). In the Lao PDR, approximately 9 in 10 anti-malarials distributed in the private sector were second-line treatments-typically locally manufactured chloroquine. In Cambodia, 90% of anti-malarials were distributed through outlets that had confirmatory testing available. Over half of all anti-malarial distribution was by outlets that did not have confirmatory testing available in the Lao PDR (54%) and Myanmar (59%). Availability of quality-assured rapid diagnostic tests (RDT) amongst the RDT-stocking public sector ranged from 99.3% in the Lao PDR to 80.1% in Cambodia. In Cambodia, the Lao PDR, and Myanmar, less than 50% of the private sector reportedly received engagement (access to subsidized commodities, supervision, training or caseload reporting), which was most common among private health facilities and pharmacies. Findings from this multi-country study suggest that Cambodia, the Lao PDR, Myanmar, and Thailand are generally in alignment with national regulations, treatment guidelines, and quality-assurance standards. However, important gaps persist in the private sector which pose a threat to national malaria control and elimination goals. Several options are discussed to help align the private sector anti-malarial market with national elimination strategies.

Long-Chain Perfluoroalkyl acids (PFAAs) Affect the Bioconcentration and Tissue Distribution of Short-Chain PFAAs in Zebrafish (Danio rerio).

PubMed

Wen, Wu; Xia, Xinghui; Hu, Diexuan; Zhou, Dong; Wang, Haotian; Zhai, Yawei; Lin, Hui

2017-11-07

Short- and long-chain perfluoroalkyl acids (PFAAs), ubiquitously coexisting in the environment, can be accumulated in organisms by binding with proteins and their binding affinities generally increase with their chain length. Therefore, we hypothesized that long-chain PFAAs will affect the bioconcentration of short-chain PFAAs in organisms. To testify this hypothesis, the bioconcentration and tissue distribution of five short-chain PFAAs (linear C-F = 3-6) were investigated in zebrafish in the absence and presence of six long-chain PFAAs (linear C-F = 7-11). The results showed that the concentrations of the short-chain PFAAs in zebrafish tissues increased with exposure time until steady states reached in the absence of long-chain PFAAs. However, in the presence of long-chain PFAAs, these short-chain PFAAs in tissues increased until peak values reached and then decreased until steady states, and the uptake and elimination rate constants of short-chain PFAAs declined in all tissues and their BCF ss decreased by 24-89%. The inhibitive effect of long-chain PFAAs may be attributed to their competition for transporters and binding sites of proteins in zebrafish with short-chain PFAAs. These results suggest that the effect of long-chain PFAAs on the bioconcentration of short-chain PFAAs should be taken into account in assessing the ecological and environmental effects of short-chain PFAAs.

Karin Sinclair | NREL

Science.gov Websites

effort under the Distributed Wind research portfolio focused on supporting the distributed wind sector to reduce the levelized cost of energy and increase the number of certified turbines for distributed

Understanding Transferable Supply Chain Lessons and Practices to a “High-Tech” Industry Using Guidelines from a Primary Sector Industry: A Case Study in the Food Industry Supply Chain

PubMed Central

Coronado Mondragon, Adrian E.; Coronado, Etienne S.

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a “high-tech” industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a “high-tech” industry such as composite materials would be to review supply chain lessons and practices in “low-tech” industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived “low-tech” industry that can be used to provide guidelines in the design of the supply chain of a “high-tech” industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a “low-tech” industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry. PMID:25821848

SHARP ENTRYWISE PERTURBATION BOUNDS FOR MARKOV CHAINS.

PubMed

Thiede, Erik; VAN Koten, Brian; Weare, Jonathan

For many Markov chains of practical interest, the invariant distribution is extremely sensitive to perturbations of some entries of the transition matrix, but insensitive to others; we give an example of such a chain, motivated by a problem in computational statistical physics. We have derived perturbation bounds on the relative error of the invariant distribution that reveal these variations in sensitivity. Our bounds are sharp, we do not impose any structural assumptions on the transition matrix or on the perturbation, and computing the bounds has the same complexity as computing the invariant distribution or computing other bounds in the literature. Moreover, our bounds have a simple interpretation in terms of hitting times, which can be used to draw intuitive but rigorous conclusions about the sensitivity of a chain to various types of perturbations.

The Determination of Production and Distribution Policy in Push-Pull Production Chain with Supply Hub as the Junction Point

NASA Astrophysics Data System (ADS)

Sinaga, A. T.; Wangsaputra, R.

2018-03-01

The development of technology causes the needs of products and services become increasingly complex, diverse, and fluctuating. This causes the level of inter-company dependencies within a production chains increased. To be able to compete, efficiency improvements need to be done collaboratively in the production chain network. One of the efforts to increase efficiency is to harmonize production and distribution activities in the production chain network. This paper describes the harmonization of production and distribution activities by applying the use of push-pull system and supply hub in the production chain between two companies. The research methodology begins with conducting empirical and literature studies, formulating research questions, developing mathematical models, conducting trials and analyses, and taking conclusions. The relationship between the two companies is described in the MINLP mathematical model with the total cost of production chain as the objective function. Decisions generated by the mathematical models are the size of production lot, size of delivery lot, number of kanban, frequency of delivery, and the number of understock and overstock lot.

Real-space localization and quantification of hole distribution in chain-ladder Sr3Ca11Cu24O41 superconductor.

PubMed

Bugnet, Matthieu; Löffler, Stefan; Hawthorn, David; Dabkowska, Hanna A; Luke, Graeme M; Schattschneider, Peter; Sawatzky, George A; Radtke, Guillaume; Botton, Gianluigi A

2016-03-01

Understanding the physical properties of the chain-ladder Sr3Ca11Cu24O41 hole-doped superconductor has been precluded by the unknown hole distribution among chains and ladders. We use electron energy-loss spectrometry (EELS) in a scanning transmission electron microscope (STEM) at atomic resolution to directly separate the contributions of chains and ladders and to unravel the hole distribution from the atomic scale variations of the O-K near-edge structures. The experimental data unambiguously demonstrate that most of the holes lie within the chain layers. A quantitative interpretation supported by inelastic scattering calculations shows that about two holes are located in the ladders, and about four holes in the chains, shedding light on the electronic structure of Sr3Ca11Cu24O41. Combined atomic resolution STEM-EELS and inelastic scattering calculations is demonstrated as a powerful approach toward a quantitative understanding of the electronic structure of cuprate superconductors, offering new possibilities for elucidating their physical properties.

Real-space localization and quantification of hole distribution in chain-ladder Sr3Ca11Cu24O41 superconductor

PubMed Central

Bugnet, Matthieu; Löffler, Stefan; Hawthorn, David; Dabkowska, Hanna A.; Luke, Graeme M.; Schattschneider, Peter; Sawatzky, George A.; Radtke, Guillaume; Botton, Gianluigi A.

2016-01-01

Understanding the physical properties of the chain-ladder Sr3Ca11Cu24O41 hole-doped superconductor has been precluded by the unknown hole distribution among chains and ladders. We use electron energy-loss spectrometry (EELS) in a scanning transmission electron microscope (STEM) at atomic resolution to directly separate the contributions of chains and ladders and to unravel the hole distribution from the atomic scale variations of the O-K near-edge structures. The experimental data unambiguously demonstrate that most of the holes lie within the chain layers. A quantitative interpretation supported by inelastic scattering calculations shows that about two holes are located in the ladders, and about four holes in the chains, shedding light on the electronic structure of Sr3Ca11Cu24O41. Combined atomic resolution STEM-EELS and inelastic scattering calculations is demonstrated as a powerful approach toward a quantitative understanding of the electronic structure of cuprate superconductors, offering new possibilities for elucidating their physical properties. PMID:27051872

The dominance of the private sector in the provision of emergency obstetric care: studies from Gujarat, India.

PubMed

Salazar, Mariano; Vora, Kranti; De Costa, Ayesha

2016-07-07

India has experienced a steep rise in institutional childbirth. The relative contributions of public and private sector facilities to emergency obstetric care (EmOC) has not been studied in this setting. This paper aims to study in three districts of Gujarat state, India:(a) the availability of EmOC facilities in the public and private sectors; (b) the availability and distribution of human resources for birth attendance in the two sectors; and (c) to benchmark the above against 2005 World Health Report benchmarks (WHR2005). A cross-sectional survey of obstetric care facilities reporting 30 or more births in the last three months was conducted (n = 159). Performance of EmOC signal functions and availability of human resources were assessed. EmOC provision was dominated by private facilities (112/159) which were located mainly in district headquarters or small urban towns. The number of basic and comprehensive EmOC facilities was below WHR2005 benchmarks. A high number of private facilities performed C-sections but not all basic signal functions (72/159). Public facilities were the main EmOC providers in rural areas and 40/47 functioned at less than basic EmOC level. The rate of obstetricians per 1000 births was higher in the private sector. The private sector is the dominant EmOC provider in the state. Given the highly skewed distribution of facilities and resources in the private sector, state led partnerships with the private sector so that all women in the state receive care is important alongside strengthening the public sector.

South Africa’s protracted struggle for equal distribution and equitable access – still not there

PubMed Central

2014-01-01

The purpose of this contribution is to analyse and explain the South African HRH case, its historical evolution, and post-apartheid reform initiatives aimed at addressing deficiencies and shortfalls. HRH in South Africa not only mirrors the nature and diversity of challenges globally, but also the strategies pursued by countries to address these challenges. Although South Africa has strongly developed health professions, large numbers of professional and mid-level workers, and also well-established training institutions, it is experiencing serious workforce shortages and access constraints. This results from the unequal distribution of health workers between the well-resourced private sector over the poorly-resourced public sector, as well as from distributional disparities between urban and rural areas. During colonial and apartheid times, disparities were aggravated by policies of racial segregation and exclusion, remnants of which are today still visible in health-professional backlogs, unequal provincial HRH distribution, and differential access to health services for specific race and class groups. Since 1994, South Africa’s transition to democracy deeply transformed the health system, health professions and HRH establishments. The introduction of free-health policies, the district health system and the prioritisation of PHC ensured more equal distribution of the workforce, as well as greater access to services for deprived groups. However, the HIV/AIDS epidemic brought about huge demands for care and massive patient loads in the public-sector. The emigration of health professionals to developed countries and to the private sector also undermines the strength and effectiveness of the public health sector. For the poor, access to care thus remains constrained and in perpetual shortfall. The post-1994 government has introduced several HRH-specific strategies to recruit, distribute, motivate and retain health professionals to strengthen the public sector and to expand access and coverage. Of great significance among these is the NHI Plan that aims to bridge the structural divide and to redistribute material and human resources more equally. Its success largely hinges on HRH and the balanced deployment of the national workforce. Low- and middle-income countries have much to learn from South African HRH experiences. In turn, South Africa has much to learn from other countries, as this case study shows. PMID:24885691

Interaction of Airspace Partitions and Traffic Flow Management Delay

NASA Technical Reports Server (NTRS)

Palopo, Kee; Chatterji, Gano B.; Lee, Hak-Tae

2010-01-01

To ensure that air traffic demand does not exceed airport and airspace capacities, traffic management restrictions, such as delaying aircraft on the ground, assigning them different routes and metering them in the airspace, are implemented. To reduce the delays resulting from these restrictions, revising the partitioning of airspace has been proposed to distribute capacity to yield a more efficient airspace configuration. The capacity of an airspace partition, commonly referred to as a sector, is limited by the number of flights that an air traffic controller can safely manage within the sector. Where viable, re-partitioning of the airspace distributes the flights over more efficient sectors and reduces individual sector demand. This increases the overall airspace efficiency, but requires additional resources in some sectors in terms of controllers and equipment, which is undesirable. This study examines the tradeoff of the number of sectors designed for a specified amount of traffic in a clear-weather day and the delays needed for accommodating the traffic demand. Results show that most of the delays are caused by airport arrival and departure capacity constraints. Some delays caused by airspace capacity constraints can be eliminated by re-partitioning the airspace. Analyses show that about 360 high-altitude sectors, which are approximately today s operational number of sectors of 373, are adequate for delays to be driven solely by airport capacity constraints for the current daily air traffic demand. For a marginal increase of 15 seconds of average delay, the number of sectors can be reduced to 283. In addition, simulations of traffic growths of 15% and 20% with forecasted airport capacities in the years 2018 and 2025 show that delays will continue to be governed by airport capacities. In clear-weather days, for small increases in traffic demand, increasing sector capacities will have almost no effect on delays.

Calculation of a fluctuating entropic force by phase space sampling.

PubMed

Waters, James T; Kim, Harold D

2015-07-01

A polymer chain pinned in space exerts a fluctuating force on the pin point in thermal equilibrium. The average of such fluctuating force is well understood from statistical mechanics as an entropic force, but little is known about the underlying force distribution. Here, we introduce two phase space sampling methods that can produce the equilibrium distribution of instantaneous forces exerted by a terminally pinned polymer. In these methods, both the positions and momenta of mass points representing a freely jointed chain are perturbed in accordance with the spatial constraints and the Boltzmann distribution of total energy. The constraint force for each conformation and momentum is calculated using Lagrangian dynamics. Using terminally pinned chains in space and on a surface, we show that the force distribution is highly asymmetric with both tensile and compressive forces. Most importantly, the mean of the distribution, which is equal to the entropic force, is not the most probable force even for long chains. Our work provides insights into the mechanistic origin of entropic forces, and an efficient computational tool for unbiased sampling of the phase space of a constrained system.

[THE PERSPECTIVES OF DEVELOPMENT OF HEALTH CARE OF THE RUSSIAN FEDERATION].

PubMed

Schepin, O P; Korotkikh, R V

2015-01-01

The article considers actual conditions and characteristics of reformation of health care of Russia. The comparison is applied to such sectoral aspects as decentralization, medical care accessibility, public sector of health care, health of healthy population, resources distribution, medical insurance, paid medical services, etc. The comprehensive approach is proposed to resolving problems of national health care and alternatives of main direction of sectoral development.

Evaluating distributed medical education: what are the community's expectations?

PubMed

Lovato, Chris; Bates, Joanna; Hanlon, Neil; Snadden, David

2009-05-01

This study aimed to explore community members' perceptions of present and future impacts of the implementation of an undergraduate medical education programme in an underserved community. We conducted semi-structured interviews with eight key informants representing the health, education, business, economy, media and political sectors. A two-stage approach was used. In the first stage, the interviews were analysed to identify sector-specific impacts informants perceived as already occurring or which they hoped to see in the future. The transcripts were then re-analysed to determine any underlying themes that crossed sectors. Community leaders described impacts that were already occurring in all sectors and also described changes in the community itself. Four underlying themes emerged: an increase in pride and status; partnership development; community self-efficacy, and community development. These underlying themes appear to characterise the development of social capital in the community. The implementation of distributed undergraduate medical education programmes in rural and underserved communities may impact their host communities in ways other than the production of a rural doctor workforce. Further studies to quantify impacts in diverse sectors and to explore possible links with social capital are needed.

Why do health workers in rural Tanzania prefer public sector employment?

PubMed Central

2012-01-01

Background Severe shortages of qualified health workers and geographical imbalances in the workforce in many low-income countries require the national health sector management to closely monitor and address issues related to the distribution of health workers across various types of health facilities. This article discusses health workers' preferences for workplace and their perceptions and experiences of the differences in working conditions in the public health sector versus the church-run health facilities in Tanzania. The broader aim is to generate knowledge that can add to debates on health sector management in low-income contexts. Methods The study has a qualitative study design to elicit in-depth information on health workers' preferences for workplace. The data comprise ten focus group discussions (FGDs) and 29 in-depth interviews (IDIs) with auxiliary staff, nursing staff, clinicians and administrators in the public health sector and in a large church-run hospital in a rural district in Tanzania. The study has an ethnographic backdrop based on earlier long-term fieldwork in Tanzania. Results The study found a clear preference for public sector employment. This was associated with health worker rights and access to various benefits offered to health workers in government service, particularly the favourable pension schemes providing economic security in old age. Health workers acknowledged that church-run hospitals generally were better equipped and provided better quality patient care, but these concerns tended to be outweighed by the financial assets of public sector employment. In addition to the sector specific differences, family concerns emerged as important in decisions on workplace. Conclusions The preference for public sector employment among health workers shown in this study seems to be associated primarily with the favourable pension scheme. The overall shortage of health workers and the distribution between health facilities is a challenge in a resource constrained health system where church-run health facilities are vital in the provision of health care in rural areas and where patients tend to prefer these services. In order to ensure equity in distribution of qualified health workers in Tanzania, a national regulation and legislation of the pension schemes is required. PMID:22480347

Why do health workers in rural Tanzania prefer public sector employment?

PubMed

Songstad, Nils Gunnar; Moland, Karen Marie; Massay, Deodatus Amadeus; Blystad, Astrid

2012-04-05

Severe shortages of qualified health workers and geographical imbalances in the workforce in many low-income countries require the national health sector management to closely monitor and address issues related to the distribution of health workers across various types of health facilities. This article discusses health workers' preferences for workplace and their perceptions and experiences of the differences in working conditions in the public health sector versus the church-run health facilities in Tanzania. The broader aim is to generate knowledge that can add to debates on health sector management in low-income contexts. The study has a qualitative study design to elicit in-depth information on health workers' preferences for workplace. The data comprise ten focus group discussions (FGDs) and 29 in-depth interviews (IDIs) with auxiliary staff, nursing staff, clinicians and administrators in the public health sector and in a large church-run hospital in a rural district in Tanzania. The study has an ethnographic backdrop based on earlier long-term fieldwork in Tanzania. The study found a clear preference for public sector employment. This was associated with health worker rights and access to various benefits offered to health workers in government service, particularly the favourable pension schemes providing economic security in old age. Health workers acknowledged that church-run hospitals generally were better equipped and provided better quality patient care, but these concerns tended to be outweighed by the financial assets of public sector employment. In addition to the sector specific differences, family concerns emerged as important in decisions on workplace. The preference for public sector employment among health workers shown in this study seems to be associated primarily with the favourable pension scheme. The overall shortage of health workers and the distribution between health facilities is a challenge in a resource constrained health system where church-run health facilities are vital in the provision of health care in rural areas and where patients tend to prefer these services. In order to ensure equity in distribution of qualified health workers in Tanzania, a national regulation and legislation of the pension schemes is required.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, K. S.; Nakae, L. F.; Prasad, M. K.

Here, we solve a simple theoretical model of time evolving fission chains due to Feynman that generalizes and asymptotically approaches the point model theory. The point model theory has been used to analyze thermal neutron counting data. This extension of the theory underlies fast counting data for both neutrons and gamma rays from metal systems. Fast neutron and gamma-ray counting is now possible using liquid scintillator arrays with nanosecond time resolution. For individual fission chains, the differential equations describing three correlated probability distributions are solved: the time-dependent internal neutron population, accumulation of fissions in time, and accumulation of leaked neutronsmore » in time. Explicit analytic formulas are given for correlated moments of the time evolving chain populations. The equations for random time gate fast neutron and gamma-ray counting distributions, due to randomly initiated chains, are presented. Correlated moment equations are given for both random time gate and triggered time gate counting. There are explicit formulas for all correlated moments are given up to triple order, for all combinations of correlated fast neutrons and gamma rays. The nonlinear differential equations for probabilities for time dependent fission chain populations have a remarkably simple Monte Carlo realization. A Monte Carlo code was developed for this theory and is shown to statistically realize the solutions to the fission chain theory probability distributions. Combined with random initiation of chains and detection of external quanta, the Monte Carlo code generates time tagged data for neutron and gamma-ray counting and from these data the counting distributions.« less

The distribution of genome shared identical by descent for a pair of full sibs by means of the continuous time Markov chain

NASA Astrophysics Data System (ADS)

Julie, Hongki; Pasaribu, Udjianna S.; Pancoro, Adi

2015-12-01

This paper will allow Markov Chain's application in genome shared identical by descent by two individual at full sibs model. The full sibs model was a continuous time Markov Chain with three state. In the full sibs model, we look for the cumulative distribution function of the number of sub segment which have 2 IBD haplotypes from a segment of the chromosome which the length is t Morgan and the cumulative distribution function of the number of sub segment which have at least 1 IBD haplotypes from a segment of the chromosome which the length is t Morgan. This cumulative distribution function will be developed by the moment generating function.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Randy M.; Kopsick, Deborah A.; Gorman, Bryan L.

Background Thousands of shipments of radioisotopes developed in the United States (U.S.) are transported domestically and internationally for medical and industrial applications, including to partner laboratories in European Union (EU) countries. Over the past five years, the Environmental Protection Agency (EPA), the Department of Energy (DOE), and Oak Ridge National Laboratory (ORNL)1 have worked with state first responder personnel, key private sector supply chain stakeholders, the Department of Homeland Security (DHS), the Department of Transportation (DOT), the Department of Defense (DoD) and the Nuclear Regulatory Commission (NRC) on Radio Frequency Identification (RFID) tracking and monitoring of medical, research and industrialmore » radioisotopes in commerce. ORNL was the pioneer of the international radioisotope shipping and production business. Most radioisotopes made and used today were either made or discovered at ORNL. While most of the radioisotopes used in the commercial sector are now produced and sold by the private market, ORNL still leads the world in the production of exotic, high-value and/or sensitive industrial, medical and research isotopes. The ORNL-EPA-DOE Radiological Source Tracking and Monitoring (RadSTraM) project tested, evaluated, and integrated RFID technologies in laboratory settings and at multiple private-sector shipping and distribution facilities (Perkin Elmer and DHL) to track and monitor common radioisotopes used in everyday commerce. The RFID tracking capability was also tested in association with other deployed technologies including radiation detection, chemical/explosives detection, advanced imaging, lasers, and infrared scanning. At the 2007 EU-U.S. Summit, the leaders of the US Department of Commerce (DOC) and EU European Commission (EC) committed to pursue jointly directed Lighthouse Priority Projects. These projects are intended to foster cooperation and reduce regulatory burdens with respect to transatlantic commerce. The Transatlantic Economic Council (TEC) Lighthouse Project on Radio Frequency Identification (RFID) has been directed to develop a joint framework for cooperation on identification and development of best practices for Radio Frequency Identification (RFID) technologies The RFID Lighthouse Priority Project commits both sides to endeavor to align U.S. and EU regulatory and policy approaches on RFID technologies, including pilot projects in the public sector.« less

Demand Activated Manufacturing Architecture (DAMA) model for supply chain collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

CHAPMAN,LEON D.; PETERSEN,MARJORIE B.

The Demand Activated Manufacturing Architecture (DAMA) project during the last five years of work with the U.S. Integrated Textile Complex (retail, apparel, textile, and fiber sectors) has developed an inter-enterprise architecture and collaborative model for supply chains. This model will enable improved collaborative business across any supply chain. The DAMA Model for Supply Chain Collaboration is a high-level model for collaboration to achieve Demand Activated Manufacturing. The five major elements of the architecture to support collaboration are (1) activity or process, (2) information, (3) application, (4) data, and (5) infrastructure. These five elements are tied to the application of themore » DAMA architecture to three phases of collaboration - prepare, pilot, and scale. There are six collaborative activities that may be employed in this model: (1) Develop Business Planning Agreements, (2) Define Products, (3) Forecast and Plan Capacity Commitments, (4) Schedule Product and Product Delivery, (5) Expedite Production and Delivery Exceptions, and (6) Populate Supply Chain Utility. The Supply Chain Utility is a set of applications implemented to support collaborative product definition, forecast visibility, planning, scheduling, and execution. The DAMA architecture and model will be presented along with the process for implementing this DAMA model.« less

Understanding the competitive advantage of TPP-related nations from an econophysics perspective: Influence caused by China and the United States

NASA Astrophysics Data System (ADS)

Xing, Lizhi; Guan, Jun; Dong, Xianlei; Wu, Shan

2018-07-01

A new analytical framework of relatively competitive advantages of economies is established in this paper, which involves distinguishing functions of industrial sectors on the global value chain with bipartite graph theory and extracting inter-sector competitive relations through resource allocation process. Furthermore, it introduces network-based quantitative indices to measure the competitive advantage on the level of industrial sector and country respectively, taking scarcity of industrial resources into consideration. Finally, it carries out scenario simulation to analyze impacts on 13 TPP-related countries' competitiveness under four kinds of scenarios. Results show that a TPP without both the United States and China will undermine the two countries' competitiveness, and China's impact on GVC will be truly weaken if a TPP agreement led by the United States is reached and vice versa. Anyway, A TPP including both these two countries would serve the mutual interests

Determinants of supply chain coordination of milk and dairy industries in Ethiopia: a case of Addis Ababa and its surroundings.

PubMed

Lemma, Habtamu Regassa; Singh, Rajwinder; Kaur, Navjot

2015-01-01

Coordination of different business activities among units becomes vital as organizations pay much attention to their core activities. Thus, their fruitfulness constantly relies on their capacity to coordinate their internal and external activities in the supply chain outside their own boundaries. Giving consideration to these obvious reasons, this paper aims to investigate the determinants of supply chain coordination of milk and dairy industries. The data were collected from 330 milk suppliers, processors, and retailers in the central part of Ethiopia. The structural equation modeling has been employed to develop the structural relationship between key constructs and measured variables. In total, 15 measured variables for coordination in the supply chain have been identified. These are further grouped into four factors namely, non-price coordination, price coordination, relationships and product development decision. It has been observed that the implementation of these factors could maximize the coordination linkage among supply chain members. Thus, dairy sectors should take the identified coordination factors into account in each of their business dealings.

Geometrically nonlinear resonance of higher-order shear deformable functionally graded carbon-nanotube-reinforced composite annular sector plates excited by harmonic transverse loading

NASA Astrophysics Data System (ADS)

Gholami, Raheb; Ansari, Reza

2018-02-01

This article presents an attempt to study the nonlinear resonance of functionally graded carbon-nanotube-reinforced composite (FG-CNTRC) annular sector plates excited by a uniformly distributed harmonic transverse load. To this purpose, first, the extended rule of mixture including the efficiency parameters is employed to approximately obtain the effective material properties of FG-CNTRC annular sector plates. Then, the focus is on presenting the weak form of discretized mathematical formulation of governing equations based on the variational differential quadrature (VDQ) method and Hamilton's principle. The geometric nonlinearity and shear deformation effects are considered based on the von Kármán assumptions and Reddy's third-order shear deformation plate theory, respectively. The discretization process is performed via the generalized differential quadrature (GDQ) method together with numerical differential and integral operators. Then, an efficient multi-step numerical scheme is used to obtain the nonlinear dynamic behavior of the FG-CNTRC annular sector plates near their primary resonance as the frequency-response curve. The accuracy of the present results is first verified and then a parametric study is presented to show the impacts of CNT volume fraction, CNT distribution pattern, geometry of annular sector plate and sector angle on the nonlinear frequency-response curve of FG-CNTRC annular sector plates with different edge supports.

Inflated medicine prices in Vietnam: a qualitative study.

PubMed

Nguyen, Tuan Anh; Knight, Rosemary; Mant, Andrea; Razee, Husna; Brooks, Geoffrey; Dang, Thu Ha; Roughead, Elizabeth Ellen

2017-06-01

One third of the world's population lacks regular access to essential medicines partly because of the high cost of medicines. In Vietnam, the cost to patients of medicines was 47 times the international reference price for originator brands and 11 times the price for generic equivalents in the public sector. In this article, we report the results of a qualitative study conducted to identify the principal reasons for inflated medicine prices in Vietnam.Between April 2008 and December 2009, 29 semi-structured interviews were conducted with staff from pharmaceutical companies, private pharmacies, the Ministry of Health, and the Ministry of Finance of Vietnam. Study participants were recruited using a combination of purposive and snowball sampling techniques. Interviews were recorded, transcribed and coded using NVivo8® software and analyzed using a framework of structure-conduct-performance (SCP).Participants attributed high prices of originator medicines to a monopoly of supply. The prices of generic medicines were also considered to be excessive, reportedly due to the need to recoup the cost of financial inducements paid to prescribers and procurement officers. These inducements constituted a dominant cost component of the end price of generic medicines. Poor market intelligence about current world prices, as well as failure to achieve economies of scale because of unwarranted duplication in pharmaceutical production and distribution system were also factors contributing to high prices. This was reported to be further compounded by multiple layers in the supply chain and unregulated retail mark-ups.To address these problems a multifaceted approach is needed encompassing policy and legislative responses. Policy options include establishing effective monitoring of medicine quality assurance, procurement, distribution and use. Rationalization of the domestic pharmaceutical production and distribution system to achieve economies of scale is also required. Appropriate legal responses include collaborations with the justice and law enforcement sectors to enforce existing laws. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Accelerating the Integration of Distributed Water Solutions: A Conceptual Financing Model from the Electricity Sector

NASA Astrophysics Data System (ADS)

Quesnel, Kimberly J.; Ajami, Newsha K.; Wyss, Noemi

2017-11-01

Modern challenges require new approaches to urban water management. One solution in the portfolio of potential strategies is the integration of distributed water infrastructure, practices, and technologies into existing systems. However, many practical barriers have prevented the widespread adoption of these systems in the US. The objective of this paper is to address these challenges by developing a conceptual model encompassing regulatory, financial, and governance components that can be used to incorporate new distributed water solutions into our current network. To construct the model, case studies of successfully implemented distributed electricity systems, specifically energy efficiency and renewable energy technologies, were examined to determine how these solutions have become prominent in recent years and what lessons can be applied to the water sector in a similar pursuit. The proposed model includes four action-oriented elements: catalyzing change, establishing funding sources, using resource pathways, and creating innovative governance structures. As illustrated in the model, the water sector should use suite of coordinated policies to promote change, engage end users through fiscal incentives, and encourage research, development and dissemination of new technologies over time.

Accelerating the Integration of Distributed Water Solutions: A Conceptual Financing Model from the Electricity Sector.

PubMed

Quesnel, Kimberly J; Ajami, Newsha K; Wyss, Noemi

2017-11-01

Modern challenges require new approaches to urban water management. One solution in the portfolio of potential strategies is the integration of distributed water infrastructure, practices, and technologies into existing systems. However, many practical barriers have prevented the widespread adoption of these systems in the US. The objective of this paper is to address these challenges by developing a conceptual model encompassing regulatory, financial, and governance components that can be used to incorporate new distributed water solutions into our current network. To construct the model, case studies of successfully implemented distributed electricity systems, specifically energy efficiency and renewable energy technologies, were examined to determine how these solutions have become prominent in recent years and what lessons can be applied to the water sector in a similar pursuit. The proposed model includes four action-oriented elements: catalyzing change, establishing funding sources, using resource pathways, and creating innovative governance structures. As illustrated in the model, the water sector should use suite of coordinated policies to promote change, engage end users through fiscal incentives, and encourage research, development and dissemination of new technologies over time.

Absolute nuclear material assay using count distribution (LAMBDA) space

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prasad, Mano K.; Snyderman, Neal J.; Rowland, Mark S.

A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

Absolute nuclear material assay using count distribution (LAMBDA) space

DOEpatents

Prasad, Manoj K [Pleasanton, CA; Snyderman, Neal J [Berkeley, CA; Rowland, Mark S [Alamo, CA

2012-06-05

A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

Promise and problems with supply chain management approaches to health care purchasing.

PubMed

Ford, Eric W; Scanlon, Dennis P

2007-01-01

Double-digit health care inflation, coupled with widespread reports of poor care quality and deadly medical errors, has caused private sector employers to reevaluate their health benefits purchasing strategies, with a focus on supply chain management approaches. In other industries, this strategy has proven to be an effective method for simultaneously reducing costs and increasing quality. This article describes four current applications of supply chain management network methodologies to health care systems and identifies potential ways to improve purchasers' return on investment. In particular, information exchanges, purchase decision, and payment agreement components of integrated supply chains are described. First, visual depictions of the health care supply chain are developed from a purchaser's perspective. Next, five nationwide programs designed to realign incentives and rewards across the health care supply chain are described. Although several nationwide efforts are gaining traction in the marketplace, at this time, no cost reduction and quality improvement program initiative appears to systematically align the entire health care supply chain from providers to purchasers, raising doubt about the ability of supply chain management network techniques to significantly impact the health care marketplace in the short run. Current individual efforts to coordinate the health care supply chain do not act on all of the actors necessary to improve outcomes, promote safety, and control costs. Nevertheless, there are indications that several of the individual efforts are coming together. If national efforts touching on all critical elements can coordinate with purchasers, then the health care supply chain's performance may improve significantly.

Nonlinear optical anisotropy and molecular orientational distribution in poly(p-phenylene benzobisthiazole) Langmuir-Blodgett films

NASA Astrophysics Data System (ADS)

Wang, Liming; Wada, Tatsuo; Yuba, Tomoyuki; Kakimoto, Masaaki; Imai, Yoshio; Sasabe, Hiroyuki

1996-06-01

The orientational distribution and packing of polymer chains were investigated in poly(p-phenylene benzobisthiazole) (PBT) Langmuir-Blodgett (LB) films by nonresonant third-harmonic generation measurement at a wavelength of 1907 nm. The tensor components of the third-harmonic susceptibility on the PBT LB film with a surface pressure of 50 mN/m were determined to be χ(3)XXXX=(16.6±2.5)×10-12 and χ(3)YYYY=(2.0±0.3)×10-12. The large nonlinear optical anisotropy can be explained as a result of highly oriented packing of the polymer chains induced by a flow orientation. A Gaussian distribution function with a standard deviation of σ=0.40 gives a practical description of the orientational distribution of PBT polymer chains. A maximum χ(3) value of (26.8±4.4)×10-12 esu is predicted assuming a perfect alignment of polymer chains. The χ(3)XXXX value increased by factor of 2 with the surface pressure from 30 to 50 mN/m mainly due to the packing density of the polymer chains, while the orientational degree did not change.

Optimization of Location-Routing Problem for Cold Chain Logistics Considering Carbon Footprint.

PubMed

Wang, Songyi; Tao, Fengming; Shi, Yuhe

2018-01-06

In order to solve the optimization problem of logistics distribution system for fresh food, this paper provides a low-carbon and environmental protection point of view, based on the characteristics of perishable products, and combines with the overall optimization idea of cold chain logistics distribution network, where the green and low-carbon location-routing problem (LRP) model in cold chain logistics is developed with the minimum total costs as the objective function, which includes carbon emission costs. A hybrid genetic algorithm with heuristic rules is designed to solve the model, and an example is used to verify the effectiveness of the algorithm. Furthermore, the simulation results obtained by a practical numerical example show the applicability of the model while provide green and environmentally friendly location-distribution schemes for the cold chain logistics enterprise. Finally, carbon tax policies are introduced to analyze the impact of carbon tax on the total costs and carbon emissions, which proves that carbon tax policy can effectively reduce carbon dioxide emissions in cold chain logistics network.

Characterization of amylose nanoparticles prepared via nanoprecipitation: Influence of chain length distribution.

PubMed

Chang, Yanjiao; Yang, Jingde; Ren, Lili; Zhou, Jiang

2018-08-15

The influence of chain length distribution of amylose on size and structure of the amylose nanoparticles (ANPs) prepared through nanoprecipitation was investigated. Amylose with different chain length distributions was obtained by β-amylase treating amylose paste for different times and measured by size exclusion chromatography (SEC) and fluorophore-assisted carbohydrate electrophoresis (FACE). ANPs prepared via precipitation were characterized by using dynamic light scattering (DLS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Results showed that the β-amylase treatments led to decrease in chain length of amylose, and it was the most important factor affecting size of ANPs. When hydrolysis degree of amylose was 52.8%, mean size of ANPs decreased from 206.4 nm to 102.7 nm. All the ANPs displayed a V-type crystalline structure and the effect of amylose chain length on crystallinity of the precipitated ANPs was negligible in the investigated range. Copyright © 2018 Elsevier Ltd. All rights reserved.

The impact of European harmonisation on Norwegian drug policy.

PubMed

Norris, P

1998-01-01

Although not a member of the European Union (EU), Norway is part of the European internal market as a result of the European economic area (EEA) agreement. Before 1994, Norway had a distinctive set of arrangements for the licensing and distribution of medicines. Many of these have undergone considerable change as a result of European harmonisation. This paper describes the previous arrangements and the impact of European harmonisation on them. Significant changes have been made to the Norwegian marketing authorisation system because of the loss of the 'need clause' and changes in price control. These are described and an attempt is made to evaluate their impact. The development of parallel importing and the introduction of private wholesaling companies have led to the development of new players in the Norwegian drug market and an increase in competition both within and between levels of the pharmaceutical distribution chain. New co-operatives have also arisen to increase the negotiating power of purchasers, particularly hospitals. Further significant changes are likely to occur in the Norwegian pharmaceutical sector in the future. The Norwegian case study provides an opportunity to look at the impact of European harmonisation on a particular set of regulatory arrangements and sheds light on the difficulty of implementing European policy in a national setting.

Quarterly Coal Distribution

EIA Publications

2017-01-01

The Quarterly Coal Distribution Report (QCDR) provides detailed U.S. domestic coal distribution data by coal origin state, coal destination state, mode of transportation, and consuming sector. Quarterly data for all years are preliminary and will be superseded by the release of the corresponding Annual Coal Distribution Report.

Analysis of inter-country input-output table based on bibliographic coupling network: How industrial sectors on the GVC compete for production resources

NASA Astrophysics Data System (ADS)

Guan, Jun; Xu, Xiaoyu; Xing, Lizhi

2018-03-01

The input-output table is comprehensive and detailed in describing national economic systems with abundance of economic relationships depicting information of supply and demand among industrial sectors. This paper focuses on how to quantify the degree of competition on the global value chain (GVC) from the perspective of econophysics. Global Industrial Strongest Relevant Network models are established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output (ICIO) tables and then have them transformed into Global Industrial Resource Competition Network models to analyze the competitive relationships based on bibliographic coupling approach. Three indicators well suited for the weighted and undirected networks with self-loops are introduced here, including unit weight for competitive power, disparity in the weight for competitive amplitude and weighted clustering coefficient for competitive intensity. Finally, these models and indicators were further applied empirically to analyze the function of industrial sectors on the basis of the latest World Input-Output Database (WIOD) in order to reveal inter-sector competitive status during the economic globalization.

Corporate Investors Increased Common Ownership In Hospitals And The Postacute Care And Hospice Sectors.

PubMed

Fowler, Annabelle C; Grabowski, David C; Gambrel, Robert J; Huskamp, Haiden A; Stevenson, David G

2017-09-01

The sharing of investors across firms is a new antitrust focus because of its potential negative effects on competition. Historically, the ability to track common investors across the continuum of health care providers has been limited. Thus, little is known about common investor ownership structures that might exist across health care delivery systems and how these linkages have evolved over time. We used data from the Provider Enrollment, Chain, and Ownership System of the Centers for Medicare and Medicaid Services to identify common investor ownership linkages across the acute care, postacute care, and hospice sectors within the same geographic markets. To our knowledge, this study provides the first description of common investor ownership trends in these sectors. We found that the percentage of acute care hospitals having common investor ties to the postacute or hospice sectors increased from 24.6 percent in 2005 to 48.9 percent in 2015. These changes have important implications for antitrust, payment, and regulatory policies. Project HOPE—The People-to-People Health Foundation, Inc.

Characterization of Ice and Snow In-Situ Properties During the Main Weather Regimes Observed in The Olympic Mountain Experiment

NASA Astrophysics Data System (ADS)

Borque, P.; Finlon, J.; Nesbitt, S. W.; McFarquhar, G. M.

2017-12-01

Observations from the Olympic Mountain Experiment (OLYMPEX) present a unique opportunity to analyze a vast catalogue of in-situ microphysical information over a variety of mid-latitude precipitation types. Data collected by the Citation Research Aircraft was processed using the University of Illinois/Oklahoma Optical Array Probe Processing Software to give not only bulk cloud properties (e.g., total number concentration, ice water content (IWC), and parameters describing gamma fits to observed size distributions) but also particle-by-particle properties (e.g., aspect ratio, perimeter, and projected area). In this work, we analyzed these properties in association with the different processes (e.g., aggregation, riming and accretion) occurring under the three main weather sectors (warm, prefrontal, and postfrontal) present over the OLYMPEX region. Bulk and particle properties present statistically different characteristics over the different sectors of the weather system analyzed. For example, the IWC over the warm sector presents a bimodal distribution with the primary maximum present at 0.055 g m-3 and a secondary maximum at 0.235 g m-3; whereas over the postfrontal sector the IWC has a unique maximum at 0.005 g m-3. The higher frequency of occurrence of mass-weighted mean crystal diameter (Dm) occurs at 1.57mm for the warm sector and 0.125mm for the postfrontal sector. In summary, the warm sector is characterized by large IWC, large Dm, shape parameter of the gamma distribution (μ) close to zero, and lighter particles (following a simple mass-diameter relation), all consistent with aggregation being the dominant process. In contrast, observations from the postfrontal sector show smaller IWCs, smaller Dm, negative μ, and heavier particles, all consistent with rimed particles dominating the region. Evidence for this was also seen with particle images from the in-situ probes showing large aggregates present in the warm sector and rimed particles in the postfrontal sector. The characterization of this extensive catalog of observations leads to a better understanding of the dominating microphysical process present in each region, which will improve GPM algorithms as bulk and particle information are of fundamental importance to relate ice cloud particle shape properties to mass-related information

Distribution of controlled substances in the U.S. supply chain: where does the compass point?

PubMed

Ruble, James H

2012-09-01

Recent administrative actions taken by the Drug Enforcement Administration (DEA) in Florida have prompted an articulate and detailed discussion of the pharmaceutical supply chain for controlled substances. Current practices in commercial distribution systems may have a partial nexus to the proliferation of opioid prescription drug abuse in Florida. No single factor or entity is responsible for this abuse proliferation, and there is no intent to harm consumers; however, distribution practices are adding risk to public health. This commentary extends a discussion on supply chain practices that seem misaligned in the promotion of legitimate business objectives and advancing public health.

Pit chains on Enceladus signal the recent tectonic dissection of the ancient cratered terrains

NASA Astrophysics Data System (ADS)

Martin, Emily S.; Kattenhorn, Simon A.; Collins, Geoffrey C.; Michaud, Robert L.; Pappalardo, Robert T.; Wyrick, Danielle Y.

2017-09-01

Enceladus is the first outer solar system body on which pit chains have been positively identified. We map the global distribution of pit chains and show that pit chains are among the youngest tectonic features on Enceladus's surface, concentrated in the cratered plains centered on Enceladus's Saturnian and anti-Saturnian hemispheres. Pit chains on Enceladus are interpreted as the surface expressions of subsurface dilational fractures underlying a cover of unconsolidated material, which we infer to be a geologically young cover of loose regolith that mantles the surface of Enceladus. A widespread layer of regolith may act to insulate the surface, which has implications for the thermal state of Enceladus's ice shell. The widespread distribution of pit chains across the cratered plains indicates that this ancient surface has recently been tectonically active.

Distribution of dopant ions around poly(3,4-ethylenedioxythiophene) chains: a theoretical study.

PubMed

Casanovas, Jordi; Zanuy, David; Alemán, Carlos

2017-04-12

The effect of counterions and multiple polymer chains on the properties and structure of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with ClO 4 - has been examined using density functional theory (DFT) calculations with periodic boundary conditions (PBCs). Calculations on a one-dimensional periodic model with four explicit polymer repeat units and two ClO 4 - molecules indicate that the latter are separated as much as possible, with the salt structure and band gap obtained from such ClO 4 - distribution being in excellent agreement with those determined experimentally. On the other hand, DFT calculations on periodic models that include two chains indicate that neighboring PEDOT chains are shifted along the molecular axis by a half of the repeat unit length, with dopant ions intercalated between the polymer molecules acting as cement. In order to support these structural features, classical molecular dynamics (MD) simulations have been performed on a multiphasic system consisting of 69 explicit PEDOT chains anchored onto a steel surface, explicit ClO 4 - anions embedded in the polymer matrix, and an acetonitrile phase layer onto the polymer matrix. Analyses of the radial distribution functions indicate that the all-anti conformation, the relative disposition of adjacent PEDOT chains and the distribution of ClO 4 - dopant ions are fully consistent with periodic DFT predictions. The agreement between two such different methodologies allows reinforcing the microscopic understanding of the PEDOT film structure.

Structure-guided investigation of lipopolysaccharide O-antigen chain length regulators reveals regions critical for modal length control.

PubMed

Kalynych, Sergei; Ruan, Xiang; Valvano, Miguel A; Cygler, Miroslaw

2011-08-01

The O-antigen component of the lipopolysaccharide (LPS) represents a population of polysaccharide molecules with nonrandom (modal) chain length distribution. The number of the repeat O units in each individual O-antigen polymer depends on the Wzz chain length regulator, an inner membrane protein belonging to the polysaccharide copolymerase (PCP) family. Different Wzz proteins confer vastly different ranges of modal lengths (4 to >100 repeat units), despite having remarkably conserved structural folds. The molecular mechanism responsible for the selective preference for a certain number of O units is unknown. Guided by the three-dimensional structures of PCPs, we constructed a panel of chimeric molecules containing parts of two closely related Wzz proteins from Salmonella enterica and Shigella flexneri which confer different O-antigen chain length distributions. Analysis of the O-antigen length distribution imparted by each chimera revealed the region spanning amino acids 67 to 95 (region 67 to 95), region 200 to 255, and region 269 to 274 as primarily affecting the length distribution. We also showed that there is no synergy between these regions. In particular, region 269 to 274 also influenced chain length distribution mediated by two distantly related PCPs, WzzB and FepE. Furthermore, from the 3 regions uncovered in this study, region 269 to 274 appeared to be critical for the stability of the oligomeric form of Wzz, as determined by cross-linking experiments. Together, our data suggest that chain length determination depends on regions that likely contribute to stabilize a supramolecular complex.

Model Development of Cold Chains for Fresh Fruits and Vegetables Distribution: A Case Study in Bali Province

NASA Astrophysics Data System (ADS)

Waisnawa, I. N. G. S.; Santosa, I. D. M. C.; Sunu, I. P. W.; Wirajati, IGAB

2018-01-01

In developing countries such as Indonesia, as much as 40% of total vegetables and fruits production becomes waste because of lack refrigeration. This condition also contributes a food crisis problem besides other factor such as, climate change and number of population. Cold chain system that will be modelled in this study is for vegetables and fruits and refrigeration system as the main devices. In future, this system will play an important role for the food crisis solution where fresh food can be distributed very well with significant low waste. The fresh food also can be kept with good quality and hygienist (bacteria contaminated). Cold Chain model will be designed using refrigeration components including, pre cooling chiller, cold room, and truck refrigeration. This study will be conducted by survey and observation di around Bali Province focus on vegetables and fruits production center. Interviews and questionnaire will be also done to get some information about the conventional distribution obstacles and problem. Distribution mapping will be developed and created. The data base of the storage characteristic of the fruits and vegetable also collected through experiment and secondary data. Depend on the mapping and data base can be developed a cold chain model that has the best performance application. The model will be can directly apply in Bali to get eligible cold chain in Bali. The cold chain model will be compared with the conventional distribution system using ALCC/LCC method and also others factor and will be weighted to get better results.

Lost in Transition: Languages Transition from Post-16 Schooling to Higher Education

ERIC Educational Resources Information Center

Harnisch, Henriette; Sargeant, Helen; Winter, Natasha

2011-01-01

Ever decreasing numbers of applicants arrive in language departments at UK universities. In the face of this decline, and against the backdrop of higher education languages departments being reduced across the UK, it is important to investigate the supply chain of languages undergraduates in the pre-entry sector. This article reports on a…

Local markets for global health technologies: lessons learned from advancing 6 new products.

PubMed

Matthias, Dipika Mathur; Taylor, Catharine H; Sen, Debjeet; Metzler, Mutsumi

2014-05-01

Key components to support local institutional and consumer markets are: supply chain, finance, clinical use, and consumer use. Key lessons learned: (1) Build supply and demand simultaneously. (2) Support a lead organization to drive the introduction process. (3) Plan for scale up from the start. (4) Profitability for the private sector is an absolute.

Marine and Maritime Sector Skills Shortages in the South West of England: Developing Regional Training Provision

ERIC Educational Resources Information Center

Beer, Julian; Meethan, Kevin

2007-01-01

Clustering theory assumes that companies gravitate towards each other on the basis of locally and regionally specific resources and supply chain characteristics, which lead in turn to innovation and high-value economic development. In line with such thinking, UK government policy has devolved certain functions to regional development agencies such…

33 CFR 3.70-10 - Sector Honolulu Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., including all the islands and atolls of the Hawaiian chain and the adjacent waters of the exclusive economic zone (EEZ); and the following islands and their adjacent waters of the EEZ: American Samoa, Johnston Atoll, Palmyra Atoll, Kingman Reef, Wake Island, Jarvis Island, Howland and Baker Islands, and Midway...

33 CFR 3.70-10 - Sector Honolulu Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., including all the islands and atolls of the Hawaiian chain and the adjacent waters of the exclusive economic zone (EEZ); and the following islands and their adjacent waters of the EEZ: American Samoa, Johnston Atoll, Palmyra Atoll, Kingman Reef, Wake Island, Jarvis Island, Howland and Baker Islands, and Midway...

33 CFR 3.70-10 - Sector Honolulu Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., including all the islands and atolls of the Hawaiian chain and the adjacent waters of the exclusive economic zone (EEZ); and the following islands and their adjacent waters of the EEZ: American Samoa, Johnston Atoll, Palmyra Atoll, Kingman Reef, Wake Island, Jarvis Island, Howland and Baker Islands, and Midway...

33 CFR 3.70-10 - Sector Honolulu Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., including all the islands and atolls of the Hawaiian chain and the adjacent waters of the exclusive economic zone (EEZ); and the following islands and their adjacent waters of the EEZ: American Samoa, Johnston Atoll, Palmyra Atoll, Kingman Reef, Wake Island, Jarvis Island, Howland and Baker Islands, and Midway...

33 CFR 3.70-10 - Sector Honolulu Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., including all the islands and atolls of the Hawaiian chain and the adjacent waters of the exclusive economic zone (EEZ); and the following islands and their adjacent waters of the EEZ: American Samoa, Johnston Atoll, Palmyra Atoll, Kingman Reef, Wake Island, Jarvis Island, Howland and Baker Islands, and Midway...

Industrial Technologies Program - A Clean, Secure Energy Future via Industrial Energy Efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The Industrial Technologies Program (ITP) leads the national effort to save energy and reduce greenhouse gas emissions in the largest energy-using sector of the U.S. economy. ITP drives energy efficiency improvements and carbon dioxide reductions throughout the manufacturing supply chain, helping develop and deploy innovative technologies that transform the way industry uses energy.

Employment Prospects in the Hotel and Catering Trade: A Franco-American Comparison.

ERIC Educational Resources Information Center

Meriot, Sylvie-Anne

2000-01-01

In both France and the United States, restaurants remain the hotel and catering sector's main employer. In France, 25% of hotel and catering personnel are self-employers versus fewer than 5% in the United States; however, the growth of hotel and restaurant chains in France may eventually limit opportunities for creating an independent activity.…

The Dynamics of Supply and Demand Chain of English-Medium Schools in Bangladesh

ERIC Educational Resources Information Center

Mousumi, Manjuma Akhtar; Kusakabe, Tatsuya

2017-01-01

This research concerns English-medium schools (EMSs), which are emerging as a popular new educational sector in Bangladesh. Because these schools have gained immense popularity, we seek to identify how these schools respond to parental demand and retain their clientele. In addition to English language demand, our findings reveal a symmetrical…

Global Skills and Mobility Challenges and Possibilities for VET: A Crossborder Cross-Sectoral Case Study

ERIC Educational Resources Information Center

Cameron, Roslyn; O'Hanlon-Rose, Terry

2011-01-01

The complex interplay of technological advances, global demographic trends and macroeconomic forces has seen the emergence of global markets, economies, supply chains and labour markets. The use of skilled migration policy and initiatives for many countries feeling the effects of aging populations and skill shortages adds another dimension to this…

Production and Beyond: A Defining Moment for Public Sector Extension

ERIC Educational Resources Information Center

Rivera, William M.

2009-01-01

Two imperatives form the basis of the present paper. The first is the market-driven imperative, vital to production and value-chain development. The second is the knowledge imperative, central to the advancement of human capacity and institutional development. In view of these two imperatives, this paper argues for overhaul in extension toward a…

Bose-Fermi mapping and a multibranch spin-chain model for strongly interacting quantum gases in one dimension: Dynamics and collective excitations

NASA Astrophysics Data System (ADS)

Yang, Li; Pu, Han

2016-09-01

We show that the wave function in one spatial sector x1

A COMPARISON OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES AMONG INDUSTRIES SECTORS IN CHINA

NASA Astrophysics Data System (ADS)

Sun, Ying; Miyadera, Tetsuhiko; Fujita, Tsuyoshi

This paper aims to examine the differences of Green supply chain management (GSCM) implementation among chemical, automobile and machinery industries in China based on a questionnaire survey designed by Industrial Ecology at two industrial parks in Shenyang city. Exploratory factor analysis and one way analysis of variance (ANOVA) were used to analyze the data. The main result was that the GSCM practices of the three industries are still at a beginning stage. The level of GSCM practices of automobile industry (promoted by international market competition) was higher than those of chemical and machinery industry (promoted by domestic laws and policies).

Who pays when VA users are hospitalized in the private sector? Evidence from three data sources.

PubMed

West, Alan N; Weeks, William B

2007-10-01

Older veterans enrolled in VA healthcare receive much of their medical care in the private sector, through Medicare. Less is known about younger VA enrollees' use of the private sector, or its funding. We compare payers for younger and older enrollees' private sector use in 3 hospitalization datasets. From 1998 to 2000, using private sector discharge data for VA enrollees in New York State, we categorized hospitalizations according to payer (self/family, private insurance, Medicare, Medicaid, other sources). We compared this payer distribution to population-weighted national Medical Expenditure Panel Survey (MEPS) data from 1996-2003 for veterans in VA healthcare. We also compared Medicare utilization in either dataset to hospitalizations for New York veterans from 1998-2000 in the VA-Medicare dataset. Analyses separated patients younger than age 65 from those age 65 or older. VA enrollees under age 65 obtain roughly half their hospitalizations in the private sector; older enrollees use the private sector at least twice as often as the VA. Datasets generally agree on payer distributions. Although older enrollees rely heavily on Medicare, they also use commercial insurance and self/family payments substantially. Half of younger enrollees' non-VA hospitalizations are paid by private insurance, but Medicare, Medicaid, and self/family each pay for one-quarter to one-third of admissions. VA enrollees use the private sector for most of their inpatient care, which is funded by multiple sources. Developing a national UB-92/VA dataset would be critical to understanding veterans' use of the private sector for specific diagnoses and procedures, particularly for the fast growing population of younger veterans.

Non-CO2 Greenhouse Gas Emissions in China 2012: Inventory and Supply Chain Analysis

NASA Astrophysics Data System (ADS)

Zhang, Bo; Zhang, Yaowen; Zhao, Xueli; Meng, Jing

2018-01-01

Reliable inventory information is critical in informing emission mitigation efforts. Using the latest officially released emission data, which is production based, we take a consumption perspective to estimate the non-CO2 greenhouse gas (GHG) emissions for China in 2012. The non-CO2 GHG emissions, which cover CH4, N2O, HFCs, PFCs, and SF6, amounted to 2003.0 Mt. CO2-eq (including 1871.9 Mt. CO2-eq from economic activities), much larger than the total CO2 emissions in some developed countries. Urban consumption (30.1%), capital formation (28.2%), and exports (20.6%) derived approximately four fifths of the total embodied emissions in final demand. Furthermore, the results from structural path analysis help identify critical embodied emission paths and key economic sectors in supply chains for mitigating non-CO2 GHG emissions in Chinese economic systems. The top 20 paths were responsible for half of the national total embodied emissions. Several industrial sectors such as Construction, Production and Supply of Electricity and Steam, Manufacture of Food and Tobacco and Manufacture of Chemicals, and Chemical Products played as the important transmission channels. Examining both production- and consumption-based non-CO2 GHG emissions will enrich our understanding of the influences of industrial positions, final consumption demands, and trades on national non-CO2 GHG emissions by considering the comprehensive abatement potentials in the supply chains.

The Homotopic Probability Distribution and the Partition Function for the Entangled System Around a Ribbon Segment Chain

NASA Astrophysics Data System (ADS)

Qian, Shang-Wu; Gu, Zhi-Yu

2001-12-01

Using the Feynman's path integral with topological constraints arising from the presence of one singular line, we find the homotopic probability distribution P_L^n for the winding number n and the partition function P_L of the entangled system around a ribbon segment chain. We find that when the width of the ribbon segment chain 2a increases,the partition function exponentially decreases, whereas the free energy increases an amount, which is proportional to the square of the width. When the width tends to zero we obtain the same results as those of a single chain with one singular point.

Uncertainty in temperature response of current consumption-based emissions estimates

NASA Astrophysics Data System (ADS)

Karstensen, J.; Peters, G. P.; Andrew, R. M.

2015-05-01

Several studies have connected emissions of greenhouse gases to economic and trade data to quantify the causal chain from consumption to emissions and climate change. These studies usually combine data and models originating from different sources, making it difficult to estimate uncertainties along the entire causal chain. We estimate uncertainties in economic data, multi-pollutant emission statistics, and metric parameters, and use Monte Carlo analysis to quantify contributions to uncertainty and to determine how uncertainty propagates to estimates of global temperature change from regional and sectoral territorial- and consumption-based emissions for the year 2007. We find that the uncertainties are sensitive to the emission allocations, mix of pollutants included, the metric and its time horizon, and the level of aggregation of the results. Uncertainties in the final results are largely dominated by the climate sensitivity and the parameters associated with the warming effects of CO2. Based on our assumptions, which exclude correlations in the economic data, the uncertainty in the economic data appears to have a relatively small impact on uncertainty at the national level in comparison to emissions and metric uncertainty. Much higher uncertainties are found at the sectoral level. Our results suggest that consumption-based national emissions are not significantly more uncertain than the corresponding production-based emissions since the largest uncertainties are due to metric and emissions which affect both perspectives equally. The two perspectives exhibit different sectoral uncertainties, due to changes of pollutant compositions. We find global sectoral consumption uncertainties in the range of ±10 to ±27 % using the Global Temperature Potential with a 50-year time horizon, with metric uncertainties dominating. National-level uncertainties are similar in both perspectives due to the dominance of CO2 over other pollutants. The consumption emissions of the top 10 emitting regions have a broad uncertainty range of ±9 to ±25 %, with metric and emission uncertainties contributing similarly. The absolute global temperature potential (AGTP) with a 50-year time horizon has much higher uncertainties, with considerable uncertainty overlap for regions and sectors, indicating that the ranking of countries is uncertain.

Quantitative risk stratification in Markov chains with limiting conditional distributions.

PubMed

Chan, David C; Pollett, Philip K; Weinstein, Milton C

2009-01-01

Many clinical decisions require patient risk stratification. The authors introduce the concept of limiting conditional distributions, which describe the equilibrium proportion of surviving patients occupying each disease state in a Markov chain with death. Such distributions can quantitatively describe risk stratification. The authors first establish conditions for the existence of a positive limiting conditional distribution in a general Markov chain and describe a framework for risk stratification using the limiting conditional distribution. They then apply their framework to a clinical example of a treatment indicated for high-risk patients, first to infer the risk of patients selected for treatment in clinical trials and then to predict the outcomes of expanding treatment to other populations of risk. For the general chain, a positive limiting conditional distribution exists only if patients in the earliest state have the lowest combined risk of progression or death. The authors show that in their general framework, outcomes and population risk are interchangeable. For the clinical example, they estimate that previous clinical trials have selected the upper quintile of patient risk for this treatment, but they also show that expanded treatment would weakly dominate this degree of targeted treatment, and universal treatment may be cost-effective. Limiting conditional distributions exist in most Markov models of progressive diseases and are well suited to represent risk stratification quantitatively. This framework can characterize patient risk in clinical trials and predict outcomes for other populations of risk.

Methodologies for Active Aging in the Manufacturing Sector

NASA Astrophysics Data System (ADS)

Fornasiero, Rosanna; Berdicchia, Domenica; Zambelli, Mario; Masino, Giovanni

The research project named “Flexibly Beyond” studied and experimented innovative models for the enhancement of the role of senior workers and prolongation of their working life. The research was based on the application of innovative methods and tools to the ageing society and in particular to the European manufacturing companies represented in the project by apparel and footwear sectors. The project was funded under the Innovative Measures of the art.6 of the European Social Fund (VS/2006/0353) and coordinated by Politecnico Calzaturiero. The real strength of the project was the large network including all the actors of the value chain which allows transferring the theoretical findings to practical level in SMEs manufacturing context.

Building Complex Kondo Impurities by Manipulating Entangled Spin Chains.

PubMed

Choi, Deung-Jang; Robles, Roberto; Yan, Shichao; Burgess, Jacob A J; Rolf-Pissarczyk, Steffen; Gauyacq, Jean-Pierre; Lorente, Nicolás; Ternes, Markus; Loth, Sebastian

2017-10-11

The creation of molecule-like structures in which magnetic atoms interact controllably is full of potential for the study of complex or strongly correlated systems. Here, we create spin chains in which a strongly correlated Kondo state emerges from magnetic coupling of transition-metal atoms. We build chains up to ten atoms in length by placing Fe and Mn atoms on a Cu 2 N surface with a scanning tunneling microscope. The atoms couple antiferromagnetically via superexchange interaction through the nitrogen atom network of the surface. The emergent Kondo resonance is spatially distributed along the chain. Its strength can be controlled by mixing atoms of different transition metal elements and manipulating their spatial distribution. We show that the Kondo screening of the full chain by the electrons of the nonmagnetic substrate depends on the interatomic entanglement of the spins in the chain, demonstrating the prerequisites to build and probe spatially extended strongly correlated nanostructures.

Integration of internet of things to reduce various losses of jatropha seed supply chain

NASA Astrophysics Data System (ADS)

Srinivasan, S. P.; Anitha, J.; Vijayakumar, R.

2017-06-01

The evolution of bio fuel supply chain has revolutionized the organization by restructuring the practices of the traditional management. A flexible distribution system is becoming the need of our society. The main focus of this paper is to integrate IoT technologies into a cultivation, extraction and management of Jatropha seed. It was noticed that major set-back of farmers due to poor supply chain integration. The various losses like information about the Jatropha seed availability, the location of esterification plants and distribution details are identified through this IoT. This enables the farmers to reorganize the land resources, yield estimation and distribution functions. The wastage and the scarcity of energy can be tackled by using the smart phone technologies. This paper is proposes a conceptual frame work on various losses involved in the supply chain of Jatropha seed.

Strategies for probing nonminimal dark sectors at colliders: The interplay between cuts and kinematic distributions

NASA Astrophysics Data System (ADS)

Dienes, Keith R.; Su, Shufang; Thomas, Brooks

2015-03-01

In this paper, we examine the strategies and prospects for distinguishing between traditional dark-matter models and models with nonminimal dark sectors—including models of Dynamical Dark Matter—at hadron colliders. For concreteness, we focus on events with two hadronic jets and large missing transverse energy at the Large Hadron Collider (LHC). As we discuss, simple "bump-hunting" searches are not sufficient; probing nonminimal dark sectors typically requires an analysis of the actual shapes of the distributions of relevant kinematic variables. We therefore begin by identifying those kinematic variables whose distributions are particularly suited to this task. However, as we demonstrate, this then leads to a number of additional subtleties, since cuts imposed on the data for the purpose of background reduction can at the same time have the unintended consequence of distorting these distributions in unexpected ways, thereby obscuring signals of new physics. We therefore proceed to study the correlations between several of the most popular relevant kinematic variables currently on the market, and investigate how imposing cuts on one or more of these variables can impact the distributions of others. Finally, we combine our results in order to assess the prospects for distinguishing nonminimal dark sectors in this channel at the upgraded LHC.

Distribution strategy of energy supply chain based on corporate social responsibility

NASA Astrophysics Data System (ADS)

Song, Qiaona

2018-02-01

From corporate social responsibilities influence on the consumer`s preferences, applying the basic Idea of game theory, the study on tactics of profit distribution of the one-period game between manufacturer and vendor in energy supply chain,then the repetitive game results of the two partners are discussed. The results show that alliance pricing is the unique nash equilibrium of the one-period game between manufacturer and vendor,and the expect profit of both manufacturer and vendor will increase after cooperation in the range of agreed value of the profit distribution factor. It`s optimal for manufacturer and vendor to insist on alliance pricing for their long-term benefits in energy supply chain.

STOCK Market Differences in Correlation-Based Weighted Network

NASA Astrophysics Data System (ADS)

Youn, Janghyuk; Lee, Junghoon; Chang, Woojin

We examined the sector dynamics of Korean stock market in relation to the market volatility. The daily price data of 360 stocks for 5019 trading days (from January, 1990 to August, 2008) in Korean stock market are used. We performed the weighted network analysis and employed four measures: the average, the variance, the intensity, and the coherence of network weights (absolute values of stock return correlations) to investigate the network structure of Korean stock market. We performed regression analysis using the four measures in the seven major industry sectors and the market (seven sectors combined). We found that the average, the intensity, and the coherence of sector (subnetwork) weights increase as market becomes volatile. Except for the "Financials" sector, the variance of sector weights also grows as market volatility increases. Based on the four measures, we can categorize "Financials," "Information Technology" and "Industrials" sectors into one group, and "Materials" and "Consumer Discretionary" sectors into another group. We investigated the distributions of intrasector and intersector weights for each sector and found the differences in "Financials" sector are most distinct.

Chemically Realistic Tetrahedral Lattice Models for Polymer Chains: Application to Polyethylene Oxide.

PubMed

Dietschreit, Johannes C B; Diestler, Dennis J; Knapp, Ernst W

2016-05-10

To speed up the generation of an ensemble of poly(ethylene oxide) (PEO) polymer chains in solution, a tetrahedral lattice model possessing the appropriate bond angles is used. The distance between noncovalently bonded atoms is maintained at realistic values by generating chains with an enhanced degree of self-avoidance by a very efficient Monte Carlo (MC) algorithm. Potential energy parameters characterizing this lattice model are adjusted so as to mimic realistic PEO polymer chains in water simulated by molecular dynamics (MD), which serves as a benchmark. The MD data show that PEO chains have a fractal dimension of about two, in contrast to self-avoiding walk lattice models, which exhibit the fractal dimension of 1.7. The potential energy accounts for a mild hydrophobic effect (HYEF) of PEO and for a proper setting of the distribution between trans and gauche conformers. The potential energy parameters are determined by matching the Flory radius, the radius of gyration, and the fraction of trans torsion angles in the chain. A gratifying result is the excellent agreement of the pair distribution function and the angular correlation for the lattice model with the benchmark distribution. The lattice model allows for the precise computation of the torsional entropy of the chain. The generation of polymer conformations of the adjusted lattice model is at least 2 orders of magnitude more efficient than MD simulations of the PEO chain in explicit water. This method of generating chain conformations on a tetrahedral lattice can also be applied to other types of polymers with appropriate adjustment of the potential energy function. The efficient MC algorithm for generating chain conformations on a tetrahedral lattice is available for download at https://github.com/Roulattice/Roulattice .

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective

PubMed Central

Indrawan, Dikky; Rich, Karl M.; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper understanding of the chain governance structure is vital to improve the effectiveness of HPAI control measures, by making the interventions more specific and fit-for-purpose given the incentive structures present in different chains. PMID:29770325

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective.

PubMed

Indrawan, Dikky; Rich, Karl M; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper understanding of the chain governance structure is vital to improve the effectiveness of HPAI control measures, by making the interventions more specific and fit-for-purpose given the incentive structures present in different chains.

Absolute nuclear material assay

DOEpatents

Prasad, Manoj K [Pleasanton, CA; Snyderman, Neal J [Berkeley, CA; Rowland, Mark S [Alamo, CA

2012-05-15

A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

Absolute nuclear material assay

DOEpatents

Prasad, Manoj K [Pleasanton, CA; Snyderman, Neal J [Berkeley, CA; Rowland, Mark S [Alamo, CA

2010-07-13

A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

Cataract surgical rate in Fars Province: Distribution and trend from 2006 to 2010.

PubMed

Hashemi, Hassan; Rezvan, Farhad; Khabazkhoob, Mehdi; Gilasi, Hamidreza; Etemad, Koroush; Mahdavi, Alireza; Asgari, Soheila

2016-03-01

To determine changes in cataract surgical rate (CSR) in Fars Province from 2006 to 2010 and identify the contributions of public and private sectors. This descriptive report is part of the Iranian Cataract Surgery Survey. To determine the provincial CSR, weights of major (>3000 annual surgeries) and minor (≤3000) centers were calculated based on the number of centers chosen for each year and multiplied by their numbers of surgeries. To determine public and private sectors' contributions, the numbers of surgeries in each sector were estimated based on the number of sampled centers. Overall, CSR improved by 25%; the number of CS decreased by 16% in the public sector and increased by 157% in the private sector. In 2006, the public sector contributed to 69% of the CSR, and by 2010, this rate had decreased to 43%. The decreasing contribution of the public sector calls for studies to identify causes and remove potential barriers.

Optimization of Location–Routing Problem for Cold Chain Logistics Considering Carbon Footprint

PubMed Central

Wang, Songyi; Tao, Fengming; Shi, Yuhe

2018-01-01

In order to solve the optimization problem of logistics distribution system for fresh food, this paper provides a low-carbon and environmental protection point of view, based on the characteristics of perishable products, and combines with the overall optimization idea of cold chain logistics distribution network, where the green and low-carbon location–routing problem (LRP) model in cold chain logistics is developed with the minimum total costs as the objective function, which includes carbon emission costs. A hybrid genetic algorithm with heuristic rules is designed to solve the model, and an example is used to verify the effectiveness of the algorithm. Furthermore, the simulation results obtained by a practical numerical example show the applicability of the model while provide green and environmentally friendly location-distribution schemes for the cold chain logistics enterprise. Finally, carbon tax policies are introduced to analyze the impact of carbon tax on the total costs and carbon emissions, which proves that carbon tax policy can effectively reduce carbon dioxide emissions in cold chain logistics network. PMID:29316639

The malaria testing and treatment landscape in Kenya: results from a nationally representative survey among the public and private sector in 2016.

PubMed

Musuva, Anne; Ejersa, Waqo; Kiptui, Rebecca; Memusi, Dorothy; Abwao, Edward

2017-12-21

Since 2004, Kenya's national malaria treatment guidelines have stipulated artemisinin-based combination therapy (ACT) as first-line treatment for uncomplicated malaria, and since 2014, confirmatory diagnosis of malaria in all cases before treatment has been recommended. A number of strategies to support national guidelines have been implemented in the public and private sectors in recent years. A nationally-representative malaria outlet survey, implemented across four epidemiological zones, was conducted between June and August 2016 to provide practical evidence to inform strategies and policies in Kenya towards achieving national malaria control goals. A total of 17,852 outlets were screened and 2271 outlets were eligible and interviewed. 78.3% of all screened public health facilities stocked both malaria diagnostic testing and quality-assured ACT (QAACT). Sulfadoxine-pyrimethamine (SP) for intermittent preventive treatment in pregnancy was available in 70% of public health facilities in endemic areas where it is recommended for treatment. SP was rarely found in the public sector outside of the endemic areas (< 0.5%). The anti-malaria stocking private sector had lower levels of QAACT (46.7%) and malaria blood testing (20.8%) availability but accounted for majority of anti-malarial distribution (70.6% of the national market share). More than 40% of anti-malarials were distributed by unregistered pharmacies (37.3%) and general retailers (7.1%). QAACT accounted for 58.2% of the total anti-malarial market share, while market share for non-QAACT was 15.8% and for SP, 24.8%. In endemic areas, 74.9% of anti-malarials distributed were QAACT. Elsewhere, QAACT market share was 49.4% in the endemic-prone areas, 33.2% in seasonal-transmission areas and 37.9% in low-risk areas. Although public sector availability of QAACT and malaria diagnosis is relatively high, there is a gap in availability of both testing and treatment that must be addressed. The private sector in Kenya, where the majority of anti-malarials are distributed, is also critical for achieving universal coverage with appropriate malaria case management. There is need for a renewed commitment and effective strategies to ensure access to affordable QAACT and confirmatory testing in the private sector, and should consider how to address malaria case management among informal providers responsible for a substantial proportion of the anti-malarial market share.

The Likelihood of Completing a VET Qualification: A Model-Based Approach. Technical Paper

ERIC Educational Resources Information Center

Mark, Kevin; Karmel, Tom

2010-01-01

This paper estimates vocational education and training (VET) course-completion rates, in order to fill a gap in performance measures for the VET sector. The technique the authors use is to track all VET course enrolments within a three-year window, centred on the year of interest. Then, using an absorbing Markov chain model for a VET course…

Acceptance and Resistance to Corporate E-Learning: A Case from the Retail Sector

ERIC Educational Resources Information Center

Rabak, Lynne; Cleveland-Innes, Martha

2006-01-01

The purpose of this study was to investigate what influences employees' acceptance and resistance to a corporate e-learning initiative provided by a large retail chain. The research used a survey design to gather interview and survey data to examine the factors affecting learner interest in, and resistance to, training and e-learning. The results…

An Interactive Microcomputer Program for Teaching the Impacts of Alternative Policy Sets in the Market for a Single Commodity.

ERIC Educational Resources Information Center

Li, Elton; Stoecker, Arthur

1995-01-01

Describes a computer software program where students define alternative policy sets and compare their effects on the welfare of consumers, producers, and the public sector. Policy sets may be a single tax or quota or a mix of taxes, subsidies, and/or price supports implemented in the marketing chain. (MJP)

Styling and Design in Multi-Segmented Market Strategies: The Case of the Italian Knitwear Sector

ERIC Educational Resources Information Center

Marcone, Maria Rosaria

2013-01-01

This study analyses Italian knitwear manufacturers that operate both in international consumer and in business markets and assesses the different forms of competition that exist between them. The purpose of the research is to analyse the different positioning of these firms within the chain of production that they belong to. The firms that deal…

Unfettering the Ball and Chain of Gender Discrimination: Gendered Experiences of Senior STEM Women in Ghana

ERIC Educational Resources Information Center

Boateng, Fred Kofi

2017-01-01

Gender disparities are rife in Ghana and its educational sector. Despite the plethora of research on gender disparities in Ghana's education system, there is no coverage on gender disparities in the Science, Technology, Engineering, and Mathematics (STEM) fields in Ghana. The paper's purpose of the article was to examine the experiences of…

Leaf wax n-alkane distributions in and across modern plants: Implications for paleoecology and chemotaxonomy

NASA Astrophysics Data System (ADS)

Bush, Rosemary T.; McInerney, Francesca A.

2013-09-01

Long chain (C21 to C37) n-alkanes are among the most long-lived and widely utilized terrestrial plant biomarkers. Dozens of studies have examined the range and variation of n-alkane chain-length abundances in modern plants from around the world, and n-alkane distributions have been used for a variety of purposes in paleoclimatology and paleoecology as well as chemotaxonomy. However, most of the paleoecological applications of n-alkane distributions have been based on a narrow set of modern data that cannot address intra- and inter-plant variability. Here, we present the results of a study using trees from near Chicago, IL, USA, as well as a meta-analysis of published data on modern plant n-alkane distributions. First, we test the conformity of n-alkane distributions in mature leaves across the canopy of 38 individual plants from 24 species as well as across a single growing season and find no significant differences for either canopy position or time of leaf collection. Second, we compile 2093 observations from 86 sources, including the new data here, to examine the generalities of n-alkane parameters such as carbon preference index (CPI), average chain length (ACL), and chain-length ratios for different plant groups. We show that angiosperms generally produce more n-alkanes than do gymnosperms, supporting previous observations, and furthermore that CPI values show such variation in modern plants that it is prudent to discard the use of CPI as a quantitative indicator of n-alkane degradation in sediments. We also test the hypotheses that certain n-alkane chain lengths predominate in and therefore can be representative of particular plant groups, namely, C23 and C25 in Sphagnum mosses, C27 and C29 in woody plants, and C31 in graminoids (grasses). We find that chain-length distributions are highly variable within plant groups, such that chemotaxonomic distinctions between grasses and woody plants are difficult to make based on n-alkane abundances. In contrast, Sphagnum mosses are marked by their predominance of C23 and C25, chain lengths which are largely absent in terrestrial vascular plants. The results here support the use of C23 as a robust proxy for Sphagnum mosses in paleoecological studies, but not the use of C27, C29, and C31 to separate graminoids and woody plants from one another, as both groups produce highly variable but significant amounts of all three chain lengths. In Africa, C33 and C35 chain lengths appear to distinguish graminoids from some woody plants, but this may be a reflection of the differences in rainforest and savanna environments. Indeed, variation in the abundances of long n-alkane chain lengths may be responding in part to local environmental conditions, and this calls for a more directed examination of the effects of temperature and aridity on plant n-alkane distributions in natural environments.

Environmental Management Competitive Pressure Effect on SME Environmental Innovation Activities: A Green Supply Chain Perspective

NASA Astrophysics Data System (ADS)

Rashid, A. A.; Sidek, A. A.; Suffian, S. A.; Daud, M. R. C.

2018-01-01

The idea of assimilating green supply chain is to integrate and establish environmental management into the supply chain practices. The study aims to explore how environmental management competitive pressure influences a SME company in Malaysia to incorporate green supply chain integration, which is an efficient platform to develop environmental innovation. This study further advances green supply chain management research in Malaysia by using the method of quantitative analysis to analyze the model developed which data will be collected based on a sample of SMEs in Malaysia in manufacturing sector. The model developed in this study illustrates how environmental management competitive pressure from main competitors affects three fundamental dimensions of green supply chain integration. The research findings suggest that environmental management competitive pressure is a vital driving force for a SME company to incorporate internal and external collaboration in developing green product innovation. From the analysis conducted, the study strongly demonstrated that the best way for a company to counteract competitor’s environmental management success is to first implement strong internal green product development process then move to incorporate external environmental management innovation between their suppliers and customers. The findings also show that internal integration of green product innovation fully mediates the relationship of environmental management competitive pressure and the external integration of green product innovation.

2017 Standard Scenarios Report: A U.S. Electricity Sector Outlook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Wesley; Mai, Trieu; Richards, James

This report summarizes the results of 26 forward-looking “standard scenarios” of the U.S. power sector simulated by the National Renewable Energy Laboratory (NREL) using the Regional Energy Deployment System (ReEDS) and Distributed Generation (dGen) capacity expansion models. The annual Standard Scenarios, which are now in their third year, have been designed to capture a range of possible power system futures considering a variety of factors that impact power sector evolution.

[Atherogenic indices in workers of different occupational sectors of the Spanish Mediterranean area].

PubMed

López González, Ángel Arturo; Rivero Ledo, Yarianne Inalvis; Vicente Herrero, M Teófila; Gil Llinás, María; Tomás Salvá, Matías; Riutord Fe, Bartomeu

2015-01-01

Atherogenic indices predict cardiovascular disease, as they provide a good reflection of the clinical and metabolic interactions of lipid fractions. A descriptive cross-sectional study was conducted on 60,798 workers in the Spanish Mediterranean area on whom different atherogenic indices (cholesterol/HDL, LDL/HDL, triglycerides/HDL) were determined, and the influence they have in the different productive work sectors. In women, the mean values of the different atherogenic indices are better in the health sector, while they are better in men in the primary sector. The percentage of working women with low values is also greater in the healthcare sector, while in men there is no clear predominant sector, with the best values being shown in the hospitality and primary sector. The distribution of cardiovascular risk factors and the values of the different atherogenic indices analyzed vary in different industrial sectors. Copyright © 2014 Sociedad Española de Arteriosclerosis. Published by Elsevier España. All rights reserved.

An assessment of the regional and national socio-economic impacts of the 2007 Rift Valley fever outbreak in Kenya.

PubMed

Rich, Karl M; Wanyoike, Francis

2010-08-01

Although Rift Valley fever (RVF) has significant impacts on human health and livestock production, it can also induce significant (and often overlooked) economic losses among various stakeholders in the marketing chain. This work assesses and quantifies the multi-dimensional socio-economic impacts of the 2007 RVF outbreak in Kenya based on a rapid assessment of livestock value chains in the northeast part of the country and a national macroeconomic analysis. Although study results show negative impacts among producers in terms of food insecurity and reductions in income, we also found significant losses among other downstream actors in the value chain, including livestock traders, slaughterhouses, casual laborers, and butchers, as well as other, non-agricultural sectors. The study highlights the need for greater sensitivity and analyses that address the multitude of economic losses resulting from an animal disease to better inform policy and decision making during animal health emergencies.

Global Carbon Fiber Composites Supply Chain Competitiveness Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Sujit; Warren, Josh; West, Devin

This study identifies key opportunities in the carbon fiber supply chain where the United States Department of Energy's Office of Energy Efficiency and Renewable Energy resources and investments can help the United States achieve or maintain a competitive advantage. The report focuses on four application areas--wind energy, aerospace, automotive, and pressure vessels--that top the list of industries using carbon fiber and carbon fiber reinforced polymers and are also particularly relevant to EERE's mission. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components,more » all contributing to a competitiveness assessment that addresses the United States' role in future industry growth. This report was prepared by researchers at Oak Ridge National Laboratory and the University of Tennessee for the Clean Energy Manufacturing Analysis Center.« less

The relationship among the resiliency practices in supply chain, financial performance, and competitive advantage in manufacturing firms in Indonesia and Sierra Leone

NASA Astrophysics Data System (ADS)

Musa, I.; Nyoman Pujawan, I.

2018-04-01

Current supply chain management (SCM) has become a potentially treasured way of safeguarding competitive advantage and improving organizational performance since competition is no longer between organizations, but among supply chains. This research conceptualizes and develops four resiliency practices (Flexibility, Redundancy, Collaboration and Agility) and tests the relationships between organizations’ financial performance and competitive advantage in manufacturing firms. The study involves manufacturing firms in Indonesia and Sierra Leone. The study used stratified random sampling to pick a sample size of 95 manufacturing firms, which represented different industrial sectors. The respondents were mainly managers of different manufacturing companies. The relationships proposed in the conceptual framework were tested using correlation analysis. The results indicate that higher levels of resilience practices in manufacturing firms can lead to enhanced competitive advantage and improved financial performance.

Third Sector Involvement in Public Education: The Israeli Case

ERIC Educational Resources Information Center

Berkovich, Izhak; Foldes, Vincent Jonathan

2012-01-01

Purpose: The purpose of this article is to address the involvement of third sector organizations in state public education in Israel, with emphasis on the decision-making processes affecting the geographic distribution of service provision. Design/methodology/approach: A collective case study approach was used to investigate non-governmental…

Electricity in Oman

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dawood, A.A.

1994-12-01

This presentation examines the development of the power generation and transmission capacity of the power system of Oman. The topics of the presentation include economic development of Oman; growth of the electricity sector including capacity generation, transmission and distribution and load characteristics; involvement of the private sector; power interconnections and exchanges; privatization; and training.

The sustainability and performance measurement on supply chain in services industry: A literature review

NASA Astrophysics Data System (ADS)

Leksono, Eko Budi; Suparno, Vanany, Iwan

2017-11-01

The services industry growth has been significant relation with economic growth. A new paradigm is needed for services sector development. The supply chain and performance measurement able to sustain of services industry growth. The supply chain implementation in the services industry called service supply chain (SSC). The globalization and stakeholder pressure makes operation of SSC should more attention to sustainability issue which consists of economic, social and environment simultaneously on SSC. Furthermore, services industry can develop by implementation of the sustainable SSC and its performance measurement. The sustainable SSC implementation can minimize of negative operation effect to environment and social, and maximize of profit. Sustainable service supply chain performance measurements (SSSCPM) are still less explored. The purpose of this paper is to review the literature in the field SSC, SSSC, SSC performance measurement (SSCPM) and SSSCPM for identification of the SSSCPM frameworks and indicators. Beside, the result of review able to look opportunities for develop a new framework for SSSCPM at the operational level, tactical and strategic, multiplayer and close loop, the effectiveness of the integration and development of modeling and simulation for evaluation in the future.

Health care inequities in north India: role of public sector in universalizing health care.

PubMed

Prinja, Shankar; Kanavos, Panos; Kumar, Rajesh

2012-09-01

Income inequality is associated with poor health. Inequities exist in service utilization and financing for health care. Health care costs push high number of households into poverty in India. We undertook this study to ascertain inequities in health status, service utilization and out-of-pocket (OOP) health expenditures in two States in north India namely, Haryana and Punjab, and Union Territory of Chandigarh. Data from National Sample Survey 60 th Round on Morbidity and Health Care were analyzed by mean consumption expenditure quintiles. Indicators were devised to document inequities in the dimensions of horizontal and vertical inequity; and redistribution of public subsidy. Concentration index (CI), and equity ratio in conjunction with concentration curve were computed to measure inequity. Reporting of morbidity and hospitalization rate had a pro-rich distribution in all three States indicating poor utilization of health services by low income households. Nearly 57 and 60 per cent households from poorest income quintile in Haryana and Punjab, respectively faced catastrophic OOP hospitalization expenditure at 10 per cent threshold. Lower prevalence of catastrophic expenditure was recorded in higher income groups. Public sector also incurred high costs for hospitalization in selected three States. Medicines constituted 19 to 47 per cent of hospitalization expenditure and 59 to 86 per cent OPD expenditure borne OOP by households in public sector. Public sector hospitalizations had a pro-poor distribution in Haryana, Punjab and Chandigarh. Our analysis indicates that public sector health service utilization needs to be improved. OOP health care expenditures at public sector institutions should to be curtailed to improve utilization of poorer segments of population. Greater availability of medicines in public sector and regulation of their prices provide a unique opportunity to reduce public sector OOP expenditure.

Health care inequities in north India: Role of public sector in universalizing health care

PubMed Central

Prinja, Shankar; Kanavos, Panos; Kumar, Rajesh

2012-01-01

Background & objectives: Income inequality is associated with poor health. Inequities exist in service utilization and financing for health care. Health care costs push high number of households into poverty in India. We undertook this study to ascertain inequities in health status, service utilization and out-of-pocket (OOP) health expenditures in two States in north India namely, Haryana and Punjab, and Union Territory of Chandigarh. Methods: Data from National Sample Survey 60th Round on Morbidity and Health Care were analyzed by mean consumption expenditure quintiles. Indicators were devised to document inequities in the dimensions of horizontal and vertical inequity; and redistribution of public subsidy. Concentration index (CI), and equity ratio in conjunction with concentration curve were computed to measure inequity. Results: Reporting of morbidity and hospitalization rate had a pro-rich distribution in all three States indicating poor utilization of health services by low income households. Nearly 57 and 60 per cent households from poorest income quintile in Haryana and Punjab, respectively faced catastrophic OOP hospitalization expenditure at 10 per cent threshold. Lower prevalence of catastrophic expenditure was recorded in higher income groups. Public sector also incurred high costs for hospitalization in selected three States. Medicines constituted 19 to 47 per cent of hospitalization expenditure and 59 to 86 per cent OPD expenditure borne OOP by households in public sector. Public sector hospitalizations had a pro-poor distribution in Haryana, Punjab and Chandigarh. Interpretation & conclusions: Our analysis indicates that public sector health service utilization needs to be improved. OOP health care expenditures at public sector institutions should to be curtailed to improve utilization of poorer segments of population. Greater availability of medicines in public sector and regulation of their prices provide a unique opportunity to reduce public sector OOP expenditure. PMID:23041735

Institutional delivery in India, 2004-14: unravelling the equity-enhancing contributions of the public sector.

PubMed

Joe, William; Perkins, Jessica M; Kumar, Saroj; Rajpal, Sunil; Subramanian, S V

2018-06-01

To achieve faster and equitable improvements in maternal and child health outcomes, the government of India launched the National Rural Health Mission in 2005. This paper describes the equity-enhancing role of the public sector in increasing use of institutional delivery care services in India between 2004 and 2014. Information on 24 661 births from nationally representative survey data for 2004 and 2014 is analysed. Concentration index is computed to describe socioeconomic-rank-related relative inequalities in institutional delivery and decomposition is used to assess the contributions of public and private sectors in overall socioeconomic inequality. Multilevel logistic regression is applied to examine the changes in socioeconomic gradient between 2004 and 2014. The analysis finds that utilization of institutional delivery care in India increased from 43% in 2004 to 83% in 2014. The bulk of the increase was in public sector use (21% in 2004 to 53% in 2014) with a modest increase in private sector use (22% in 2004 to 30% in 2014). The shift from a pro-rich to pro-poor distribution of public sector use is confirmed. Decomposition analysis indicates that 51% of these reductions in socioeconomic inequality are associated with improved pro-poor distribution of public sector births. Multilevel logistic regressions confirm the disappearance of a wealth-based gradient in public sector births between 2004 and 2014. We conclude that public health investments in India have significantly contributed towards an equitable increase in the coverage of institutional delivery care. Sustained policy efforts are necessary, however, with an emphasis on education, sociocultural and geographical factors to ensure universal coverage of institutional delivery care services in India.

Bayesian calibration of terrestrial ecosystem models: A study of advanced Markov chain Monte Carlo methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Dan; Ricciuto, Daniel; Walker, Anthony

Calibration of terrestrial ecosystem models is important but challenging. Bayesian inference implemented by Markov chain Monte Carlo (MCMC) sampling provides a comprehensive framework to estimate model parameters and associated uncertainties using their posterior distributions. The effectiveness and efficiency of the method strongly depend on the MCMC algorithm used. In this study, a Differential Evolution Adaptive Metropolis (DREAM) algorithm was used to estimate posterior distributions of 21 parameters for the data assimilation linked ecosystem carbon (DALEC) model using 14 years of daily net ecosystem exchange data collected at the Harvard Forest Environmental Measurement Site eddy-flux tower. The DREAM is a multi-chainmore » method and uses differential evolution technique for chain movement, allowing it to be efficiently applied to high-dimensional problems, and can reliably estimate heavy-tailed and multimodal distributions that are difficult for single-chain schemes using a Gaussian proposal distribution. The results were evaluated against the popular Adaptive Metropolis (AM) scheme. DREAM indicated that two parameters controlling autumn phenology have multiple modes in their posterior distributions while AM only identified one mode. The calibration of DREAM resulted in a better model fit and predictive performance compared to the AM. DREAM provides means for a good exploration of the posterior distributions of model parameters. Lastly, it reduces the risk of false convergence to a local optimum and potentially improves the predictive performance of the calibrated model.« less

Bayesian calibration of terrestrial ecosystem models: A study of advanced Markov chain Monte Carlo methods

DOE PAGES

Lu, Dan; Ricciuto, Daniel; Walker, Anthony; ...

2017-02-22

Calibration of terrestrial ecosystem models is important but challenging. Bayesian inference implemented by Markov chain Monte Carlo (MCMC) sampling provides a comprehensive framework to estimate model parameters and associated uncertainties using their posterior distributions. The effectiveness and efficiency of the method strongly depend on the MCMC algorithm used. In this study, a Differential Evolution Adaptive Metropolis (DREAM) algorithm was used to estimate posterior distributions of 21 parameters for the data assimilation linked ecosystem carbon (DALEC) model using 14 years of daily net ecosystem exchange data collected at the Harvard Forest Environmental Measurement Site eddy-flux tower. The DREAM is a multi-chainmore » method and uses differential evolution technique for chain movement, allowing it to be efficiently applied to high-dimensional problems, and can reliably estimate heavy-tailed and multimodal distributions that are difficult for single-chain schemes using a Gaussian proposal distribution. The results were evaluated against the popular Adaptive Metropolis (AM) scheme. DREAM indicated that two parameters controlling autumn phenology have multiple modes in their posterior distributions while AM only identified one mode. The calibration of DREAM resulted in a better model fit and predictive performance compared to the AM. DREAM provides means for a good exploration of the posterior distributions of model parameters. Lastly, it reduces the risk of false convergence to a local optimum and potentially improves the predictive performance of the calibrated model.« less

Mutational Analysis of the Rhodopsin Gene in Sector Retinitis Pigmentosa.

PubMed

Napier, Maria L; Durga, Dash; Wolsley, Clive J; Chamney, Sarah; Alexander, Sharon; Brennan, Rosie; Simpson, David A; Silvestri, Giuliana; Willoughby, Colin E

2015-01-01

To determine the role of rhodopsin (RHO) gene mutations in patients with sector retinitis pigmentosa (RP) from Northern Ireland. A case series of sector RP in a tertiary ocular genetics clinic. Four patients with sector RP were recruited from the Royal Victoria Hospital (Belfast, Northern Ireland) and Altnagelvin Hospital (Londonderry, Northern Ireland) following informed consent. The diagnosis of sector RP was based on clinical examination, International Society for Clinical Electrophysiology of Vision (ISCEV) standard electrophysiology, and visual field analysis. DNA was extracted from peripheral blood leucocytes and the coding regions and adjacent flanking intronic sequences of the RHO gene were polymerase chain reaction (PCR) amplified and cycle sequenced. Rhodopsin mutational status. A heterozygous missense mutation in RHO (c.173C > T) resulting in a non-conservative substitution of threonine to methionine (p. Thr58Met) was identified in one patient and was absent from 360 control individuals. This non-conservative substitution (p.Thr58Met) replaces a highly evolutionary conserved polar hydrophilic threonine residue with a non-polar hydrophobic methionine residue at position 58 near the cytoplasmic border of helix A of RHO. The study identified a RHO gene mutation (p.Thr58Met) not previously reported in RP in a patient with sector RP. These findings outline the phenotypic variability associated with RHO mutations. It has been proposed that the regional effects of RHO mutations are likely to result from interplay between mutant alleles and other genetic, epigenetic and environmental factors.

Supply Chain Synchronization: Improving Distribution Velocity to the Theatre

DTIC Science & Technology

2009-06-01

Figures ix List of Tables x I. Introduction 1 II. Literature Review 4...DISTRIBUTION VELOCITY TO THE THEATRE I. Introduction “When you do battle, even if you are winning, if you continue for a long time it will...jointvision/jvpub2.htm Accessed 9 March 2009. Lambert, Douglas M. Supply Chain Mangement : Processes, Partnerships, Performance. Jacksonville: The

Hardwood supply chain and the role of log brokers in 2012

Treesearch

Iris Montague; Adrienn Andersch; Jan Wiedenbeck; Urs Buehlmann

2013-01-01

The recent economic crisis has greatly affected how companies conduct business. To be competitive, companies had to make changes to their product lines, distribution channels, marketing, and overall business strategies. This study was conducted to describe and analyze the log supply component of the hardwood forest products distribution chain and to investigate changes...

Modeling Radioactive Decay Chains with Branching Fraction Uncertainties

DTIC Science & Technology

2013-03-01

moments methods with transmutation matrices. Uncertainty from both half-lives and branching fractions is carried through these calculations by Monte...moment methods, method for sampling from normal distributions for half- life uncertainty, and use of transmutation matrices were leveraged. This...distributions for half-life and branching fraction uncertainties, building decay chains and generating the transmutation matrix (T-matrix

Pseudo Bayes Estimates for Test Score Distributions and Chained Equipercentile Equating. Research Report. ETS RR-09-47

ERIC Educational Resources Information Center

Moses, Tim; Oh, Hyeonjoo J.

2009-01-01

Pseudo Bayes probability estimates are weighted averages of raw and modeled probabilities; these estimates have been studied primarily in nonpsychometric contexts. The purpose of this study was to evaluate pseudo Bayes probability estimates as applied to the estimation of psychometric test score distributions and chained equipercentile equating…

Nanotechnology in the development of novel functional foods or their package. An overview based in patent analysis.

PubMed

Pérez-Esteve, Edgar; Bernardos, Andrea; Martínez-Máñez, Ramón; Barat, José M

2013-04-01

In recent years nanotechnology has become a significant component in food industry. It is present in all food chain steps, from the design of new ingredients or additives, to the most modern systems of food quality methods or packaging, demonstrating the great potential of this new technology in a sector as traditional as food. However, while interest by industry in nanotechnology increases, the rejection by consumers, concerned about the potential risk, does too. The aim of this review is to evaluate the development of food nanotechnology by means of a patent analysis, highlighting current applications of nanotechnology along the whole food chain and contextualizing this evolution in the social scene.

Metastable Distributions of Markov Chains with Rare Transitions

NASA Astrophysics Data System (ADS)

Freidlin, M.; Koralov, L.

2017-06-01

In this paper we consider Markov chains X^\\varepsilon _t with transition rates that depend on a small parameter \\varepsilon . We are interested in the long time behavior of X^\\varepsilon _t at various \\varepsilon -dependent time scales t = t(\\varepsilon ). The asymptotic behavior depends on how the point (1/\\varepsilon , t(\\varepsilon )) approaches infinity. We introduce a general notion of complete asymptotic regularity (a certain asymptotic relation between the ratios of transition rates), which ensures the existence of the metastable distribution for each initial point and a given time scale t(\\varepsilon ). The technique of i-graphs allows one to describe the metastable distribution explicitly. The result may be viewed as a generalization of the ergodic theorem to the case of parameter-dependent Markov chains.

Analysis of Product Distribution Strategy in Digital Publishing Industry Based on Game-Theory

NASA Astrophysics Data System (ADS)

Xu, Li-ping; Chen, Haiyan

2017-04-01

The digital publishing output increased significantly year by year. It has been the most vigorous point of economic growth and has been more important to press and publication industry. Its distribution channel has been diversified, which is different from the traditional industry. A deep research has been done in digital publishing industry, for making clear of the constitution of the industry chain and establishing the model of industry chain. The cooperative and competitive relationship between different distribution channels have been analyzed basing on a game-theory. By comparing the distribution quantity and the market size between the static distribution strategy and dynamic distribution strategy, we get the theory evidence about how to choose the distribution strategy to get the optimal benefit.

Health working with industry to promote fruit and vegetables: a case study of the Western Australian Fruit and Vegetable Campaign with reflection on effectiveness of inter-sectoral action.

PubMed

Miller, Margaret; Pollard, Christina

2005-04-01

In 1990, the Department of Health in Western Australia (DOH) initiated a five-year campaign to increase awareness of the need to eat more fruit and vegetables and to encourage increased consumption. This paper describes aspects of the campaign and reviews the strengths and weaknesses of health and fruit and vegetable industry alliances to extend and sustain the campaign. The fruit and vegetable industry was engaged through information sharing, consultation, working groups and joint promotions. The partnership was examined in terms of six inter-sectoral action dimensions (necessity; opportunity and capacity to work together; established relationships for goal achievement; degree of planning; potential for evaluation; and sustainability of action). There were both need and opportunity for each sector to work together. Health had commitment, expertise and resources to plan, implement and evaluate the campaign. Industry had established channels of communication within the supply chain. Sustained health sector presence provided incentive, endorsement and policy direction. Resources and infrastructure limited partnership sustainability. Greatest potential for success occurred when participants' contributions were closely aligned to their core business and there was a body responsible for co-ordinating action.

Environmental logistics performance indicators affecting per capita income and sectoral growth: evidence from a panel of selected global ranked logistics countries.

PubMed

Khan, Syed Abdul Rehman; Qianli, Dong; SongBo, Wei; Zaman, Khalid; Zhang, Yu

2017-01-01

The objective of the study is to examine the long-run and causal relationship between environmental logistics performance indicators (ELPI) and growth-specific factors in a panel of 15 selected global ranked logistics countries over a period of 2007-2015. This study is exclusive as we utilized a number of LPI factors including logistics performance, logistics competence, and logistics infrastructure with mediation of sustainable factors, i.e., carbon dioxide (CO 2 ), fossil fuel, and greenhouse gas (GHG) emissions in a region. The results show that the per capita income, industry, manufacturing, and service share to GDP is affected by CO 2 emissions and GHG emissions. Logistics competence and infrastructure promote economic growth and sectoral value added, while energy demand and FDI inflows both are prerequisite for sustainable agriculture in a region. The causal relationships confirm that more energy demand results in an increase in economic growth, industry value added, and the service sector (i.e., feedback hypothesis), while the sustainable supply chain system improves energy demand, FDI inflows, economic growth, and sectoral growth (i.e., conservation hypothesis) in a panel of countries.

Next Generation Waste Tracking: Linking Legacy Systems with Modern Networking Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Randy M.; Resseguie, David R.; Shankar, Mallikarjun

2010-01-01

This report describes results from a preliminary analysis to satisfy the Department of Energy (DOE) objective to ensure the safe, secure, efficient packaging and transportation of materials both hazardous and non hazardous [1, 2]. The DOE Office of Environmental Management (OEM) through Oak Ridge National Laboratory (ORNL) has embarked on a project to further this objective. OEM and ORNL have agreed to develop, demonstrate and make available modern day cost effective technologies for characterization, identification, tracking, monitoring and disposal of radioactive waste when transported by, or between, motor, air, rail, and water modes. During the past 8 years ORNL hasmore » investigated and deployed Web 2.0 compliant sensors into the transportation segment of the supply chain. ORNL has recently demonstrated operational experience with DOE Oak Ridge Operations Office (ORO) and others in national test beds and applications within this domain of the supply chain. Furthermore, in addition to DOE, these hazardous materials supply chain partners included Federal and State enforcement agencies, international ports, and commercial sector shipping operations in a hazardous/radioactive materials tracking and monitoring program called IntelligentFreight. IntelligentFreight is an ORNL initiative encompassing 5 years of research effort associated with the supply chain. The ongoing ORNL SmartFreight programs include RadSTraM [3], GRadSTraM , Trusted Corridors, SensorPedia [4], SensorNet, Southeastern Transportation Corridor Pilot (SETCP) and Trade Data Exchange [5]. The integration of multiple technologies aimed at safer more secure conveyance has been investigated with the core research question being focused on testing distinctly different distributed supply chain information sharing systems. ORNL with support from ORO have demonstrated capabilities when transporting Environmental Management (EM) waste materials for disposal over an onsite haul road. ORNL has unified the operations of existing legacy hazardous, radioactive and related informational databases and systems using emerging Web 2.0 technologies. These capabilities were used to interoperate ORNL s waste generating, packaging, transportation and disposal with other DOE ORO waste management contractors. Importantly, the DOE EM objectives were accomplished in a cost effective manner without altering existing information systems. A path forward is to demonstrate and share these technologies with DOE EM, contractors and stakeholders. This approach will not alter existing DOE assets, i.e. Automated Traffic Management Systems (ATMS), Transportation Tracking and Communications System (TRANSCOM), the Argonne National Laboratory (ANL) demonstrated package tracking system, etc« less

Trade brokerage property of industrial sectors on the global value chain

NASA Astrophysics Data System (ADS)

Xing, Lizhi; Xu, Xiaoyu; Guan, Jun; Dong, Xianlei

2017-08-01

ICIO data have proven itself to be a reliable source for the analysis of economic globalization, with which sectors all over the world could be constructed into a sophisticated GVC, bringing the advantages of simultaneous study on international and domestic economies in detail as a holistic network. This paper uses OECD-WTO TiVA data to set up GIVCN-TiVA networks as the general analytical framework, depicting the transferring process of intermediate goods among sectors of various countries/regions. Secondly, the conception of brokerage roles in SNA has been adopted to redefine sector’s function while linkage exists between its upstream providers and downstream consumers, referred to as “Trade Brokerage Property”, as well as to quantify the ratio of each types of the roles. Thirdly, a set of simulations have been defined to testify the contribution that different TBPs incur to the robustness of global economic system. Finally, analyses on TBPs and NTBPs have been carried out in the levels of industry and country/region, respectively.

Measurement and simulation of the relatively competitive advantages and weaknesses between economies based on bipartite graph theory.

PubMed

Guan, Jun; Xu, Xiaoyu; Wu, Shan; Xing, Lizhi

2018-01-01

The input-output table is very comprehensive and detailed in describing the national economic systems with abundant economic relationships, which contain supply and demand information among various industrial sectors. The complex network, a theory, and method for measuring the structure of a complex system can depict the structural characteristics of the internal structure of the researched object by measuring the structural indicators of the social and economic systems, revealing the complex relationships between the inner hierarchies and the external economic functions. In this paper, functions of industrial sectors on the global value chain are to be distinguished with bipartite graph theory, and inter-sector competitive relationships are to be extracted through resource allocation process. Furthermore, quantitative analysis indices will be proposed under the perspective of a complex network, which will be used to bring about simulations on the variation tendencies of economies' status in different situations of commercial intercourses. Finally, a new econophysics analytical framework of international trade is to be established.

Measurement and simulation of the relatively competitive advantages and weaknesses between economies based on bipartite graph theory

PubMed Central

Guan, Jun; Xu, Xiaoyu; Wu, Shan

2018-01-01

The input-output table is very comprehensive and detailed in describing the national economic systems with abundant economic relationships, which contain supply and demand information among various industrial sectors. The complex network, a theory, and method for measuring the structure of a complex system can depict the structural characteristics of the internal structure of the researched object by measuring the structural indicators of the social and economic systems, revealing the complex relationships between the inner hierarchies and the external economic functions. In this paper, functions of industrial sectors on the global value chain are to be distinguished with bipartite graph theory, and inter-sector competitive relationships are to be extracted through resource allocation process. Furthermore, quantitative analysis indices will be proposed under the perspective of a complex network, which will be used to bring about simulations on the variation tendencies of economies’ status in different situations of commercial intercourses. Finally, a new econophysics analytical framework of international trade is to be established. PMID:29813083

The American Climate Prospectus: a risk-centered analysis of the economic impacts of climate change

NASA Astrophysics Data System (ADS)

Jina, A.; Houser, T.; Hsiang, S. M.; Kopp, R. E., III; Delgado, M.; Larsen, K.; Mohan, S.; Rasmussen, D.; Rising, J.; Wilson, P. S.; Muir-Wood, R.

2014-12-01

The American Climate Prospectus (ACP), the analysis underlying the Risky Business project, quantitatively assessed the climate risks posed to the United States' economy in six sectors - crop yields, energy demand, coastal property, crime, labor productivity, and mortality [1]. The ACP is unique in its characterization of the full probability distribution of economic impacts of climate change throughout the 21st century, making it an extremely useful basis for risk assessments. Three key innovations allow for this characterization. First, climate projections from CMIP5 models are scaled to a temperature probability distribution derived from a coarser climate model (MAGICC). This allows a more accurate representation of the whole distribution of future climates (in particular the tails) than a simple ensemble average. These are downscaled both temporally and spatially. Second, a set of local sea level rise and tropical cyclone projections are used in conjunction with the most detailed dataset of coastal property in the US in order to capture the risks of rising seas and storm surge. Third, we base many of our sectors on empirically-derived responses to temperature and precipitation. Each of these dose-response functions is resampled many times to populate a statistical distribution. Combining these with uncertainty in emissions scenario, climate model, and weather, we create the full probability distribution of climate impacts from county up to national levels, as well as model the effects upon the economy as a whole. Results are presented as likelihood ranges, as well as changes to return intervals of extreme events. The ACP analysis allows us to compare between sectors to understand the magnitude of required policy responses, and also to identify risks through time. Many sectors displaying large impacts at the end of the century, like those of mortality, have smaller changes in the near-term, due to non-linearities in the response functions. Other sectors, like coastal damages, have monotonically increasing costs throughout the 21st century. Taken together, the results from the ACP presents a unique and novel view of the short-, medium-, and long-term economic risks of climate change in the US. References: [1] T. Houser et al (2014), American Climate Prospectus, www.climateprospectus.org.

Do anti-malarials in Africa meet quality standards? The market penetration of non quality-assured artemisinin combination therapy in eight African countries.

PubMed

Newton, Paul N; Hanson, Kara; Goodman, Catherine

2017-05-25

Quality of artemisinin-based combination therapy (ACT) is important for ensuring malaria parasite clearance and protecting the efficacy of artemisinin-based therapies. The extent to which non quality-assured ACT (non-QAACT), or those not granted global regulatory approval, are available and used to treat malaria in endemic countries is poorly documented. This paper uses national and sub-national medicine outlet surveys conducted in eight study countries (Benin, Kinshasa and Kantanga [Democratic Republic of the Congo, DRC], Kenya, Madagascar, Nigeria, Tanzania, Uganda and Zambia) between 2009 and 2015 to describe the non-QAACT market and to document trends in availability and distribution of non-QAACT in the public and private sector. In 2014/15, non-QAACT were most commonly available in Kinshasa (83%), followed by Katanga (53%), Nigeria (48%), Kenya (42%), and Uganda (33%). Non-QAACT accounted for 20% of the market share in the private sector in Kenya, followed by Benin and Uganda (19%), Nigeria (12%) and Zambia (8%); this figure was 27% in Katanga and 40% in Kinshasa. Public sector non-QAACT availability and distribution was much lower, with the exception of Zambia (availability, 85%; market share, 32%). Diverse generics and formulations were available, but non-QAACT were most commonly artemether-lumefantrine (AL) or dihydroartemisinin-piperaquine (DHA PPQ), in tablet formulation, imported, and distributed in urban areas at either pharmacies or drug stores. The number of unique manufacturers supplying non-QAACT to each country ranged from 9 in Uganda to 92 in Nigeria. Addressing the availability and distribution of non-QAACT will require effective private sector engagement and evidence-based strategies to address provider and consumer demand for these products. Given the variation in non-QAACT markets observed across the eight study countries, active efforts to limit registration, importation and distribution of non-QAACT must be tailored to the country context, and will involve addressing complex and challenging aspects of medicine registration, private sector pharmaceutical regulation, local manufacturing and drug importation. These efforts may be critical not only to patient health and safety, but also to effective malaria control and protection of artemisinin drug efficacy in the face of spreading resistance.

Heuristic economic assessment of the Afghanistan construction materials sector: cement and dimension stone production

USGS Publications Warehouse

Mossotti, Victor G.

2014-01-01

Over the past decade, the U.S. Government has invested more than $106 billion for physical, societal, and governmental reconstruction assistance to Afghanistan (Special Inspector General for Afghanistan Reconstruction, 2012a). This funding, along with private investment, has stimulated a growing demand for particular industrial minerals and construction materials. In support of this effort, the U.S. Geological Survey released a preliminary mineral assessment in 2007 on selected Afghan nonfuel minerals (Peters and others, 2007). More recently, the 2007 mineral assessment was updated with the inclusion of a more extensive array of Afghan nonfuel minerals (Peters and others, 2011). As a follow-up on the 2011 assessment, this report provides an analysis of the current use and prospects of the following Afghan industrial minerals required to manufacture construction materials: clays of various types, bauxite, gypsum, cement-grade limestone, aggregate (sand and gravel), and dimension stone (sandstone, quartzite, granite, slate, limestone, travertine, marble). The intention of this paper is to assess the: Use of Afghan industrial minerals to manufacture construction materials, Prospects for growth in domestic construction materials production sectors, Factors controlling the competitiveness of domestic production relative to foreign imports of construction materials, and Feasibility of using natural gas as the prime source of thermal energy and for generating electrical energy for cement production. The discussion here is based on classical principles of supply and demand. Imbedded in these principles is an understanding that the attributes of supply and demand are highly variable. For construction materials, demand for a given product may depend on seasons of the year, location of construction sites, product delivery time, political factors, governmental regulations, cultural issues, price, and how essential a given product might be to the buyer. Moreover, failure on the supply side to mirror such attributes can be deal-breakers in a transaction. For qualitative interpretation of the findings in this report, the value chain was used to conceptualize the relation between supply and demand. Although quantitative data on the Afghan construction materials sector have been hard to come by, the premise herein was that qualitative aspects of supply and demand are revealed by following the flow of funding through projects of varying sizes. It was found that the spectrum of attributes on the demand side of large multimillion dollar reconstruction projects is generally high dimensional, distributed over a broad line of construction materials at diverse locations, and in varying quantities. As interpreted herein, project funds dispensed at the higher hierarchical levels of a project are often concentrated on procurement of construction materials and services at the upper end of the value chain. In contrast, project funds dispensed at the lower hierarchical levels are disseminated across a multiplicity of subprojects, thus restricting project acquisitions to the lower end of the value chain. Evidence suggests that under the current conditions in Afghanistan producers of construction materials at the lower end of the value chain (adobe brick, aggregate, low-end marble products) can successfully compete in local markets and turn a profit. In contrast, producers of energy-intensive products such as cement will continue to face intense competition from imports, at least in the near-term. In the long-term, as infrastructure issues are resolved, and as business conditions in Afghanistan improve, domestic producers will have a locational advantage in establishing a solid niche in their respective home markets. In the process of tendering properties for cement production, the pivotal issues of abundant, reliable, and cost-effective thermal and electrical energy sources for cement production have become prominent. Over the past 50 years, powdered coal and natural gas have been proven to be excellent fuels for firing kilns at cement plants, and both fuels are used as energy sources for electricity generation. After reviewing the main aspects of the coal and natural gas sectors, it is concluded here that the issues for plant design are not that of energy source feasibility but rather that of optimization of energy technologies for a given plant at a particular time and place, based on a diverse mix of energy and transport technologies.

Distribution and importance of microplastics in the marine environment: A review of the sources, fate, effects, and potential solutions.

PubMed

Auta, H S; Emenike, C U; Fauziah, S H

2017-05-01

The presence of microplastics in the marine environment poses a great threat to the entire ecosystem and has received much attention lately as the presence has greatly impacted oceans, lakes, seas, rivers, coastal areas and even the Polar Regions. Microplastics are found in most commonly utilized products (primary microplastics), or may originate from the fragmentation of larger plastic debris (secondary microplastics). The material enters the marine environment through terrestrial and land-based activities, especially via runoffs and is known to have great impact on marine organisms as studies have shown that large numbers of marine organisms have been affected by microplastics. Microplastic particles have been found distributed in large numbers in Africa, Asia, Southeast Asia, India, South Africa, North America, and in Europe. This review describes the sources and global distribution of microplastics in the environment, the fate and impact on marine biota, especially the food chain. Furthermore, the control measures discussed are those mapped out by both national and international environmental organizations for combating the impact from microplastics. Identifying the main sources of microplastic pollution in the environment and creating awareness through education at the public, private, and government sectors will go a long way in reducing the entry of microplastics into the environment. Also, knowing the associated behavioral mechanisms will enable better understanding of the impacts for the marine environment. However, a more promising and environmentally safe approach could be provided by exploiting the potentials of microorganisms, especially those of marine origin that can degrade microplastics. The concentration, distribution sources and fate of microplastics in the global marine environment were discussed, so also was the impact of microplastics on a wide range of marine biota. Copyright © 2017 Elsevier Ltd. All rights reserved.

Smart grids: A paradigm shift on energy generation and distribution with the emergence of a new energy management business model

NASA Astrophysics Data System (ADS)

Cardenas, Jesus Alvaro

An energy and environmental crisis will emerge throughout the world if we continue with our current practices of generation and distribution of electricity. A possible solution to this problem is based on the Smart grid concept, which is heavily influenced by Information and Communication Technology (ICT). Although the electricity industry is mostly regulated, there are global models used as roadmaps for Smart Grids' implementation focusing on technologies and the basic generation-distribution-transmission model. This project aims to further enhance a business model for a future global deployment. It takes into consideration the many factors interacting in this energy provision process, based on the diffusion of technologies and literature surveys on the available documents in the Internet as well as peer-reviewed publications. Tariffs and regulations, distributed energy generation, integration of service providers, consumers becoming producers, self-healing devices, and many other elements are shifting this industry into a major change towards liberalization and deregulation of this sector, which has been heavily protected by the government due to the importance of electricity for consumers. We propose an Energy Management Business Model composed by four basic elements: Supply Chain, Information and Communication Technology (ICT), Stakeholders Response, and the resulting Green Efficient Energy (GEE). We support the developed model based on the literature survey, we support it with the diffusion analysis of these elements, and support the overall model with two surveys: one for peers and professionals, and other for experts in the field, based on the Smart Grid Carnegie Melon Maturity Model (CMU SEI SGMM). The contribution of this model is a simple path to follow for entities that want to achieve environmental friendly energy with the involvement of technology and all stakeholders.

Computer program for flat sector thrust bearing performance

NASA Technical Reports Server (NTRS)

Presler, A. F.; Etsion, I.

1977-01-01

A versatile computer program is presented which achieves a rapid, numerical solution of the Reynolds equation for a flat sector thrust pad bearing with either compressible or liquid lubricants. Program input includes a range in values of the geometric and operating parameters of the sector bearing. Performance characteristics are obtained from the calculated bearing pressure distribution. These are the load capacity, center of pressure coordinates, frictional energy dissipation, and flow rates of liquid lubricant across the bearing edges. Two sample problems are described.

Follow that fish: Uncovering the hidden blue economy in coral reef fisheries

PubMed Central

Teneva, Lida; Kittinger, John N.

2017-01-01

Despite their importance for human well-being, nearshore fisheries are often data poor, undervalued, and underappreciated in policy and development programs. We assess the value chain for nearshore Hawaiian coral reef fisheries, mapping post-catch distribution and disposition, and quantifying associated monetary, food security, and cultural values. We estimate that the total annual value of the nearshore fishery in Hawaiʻi is $10.3-$16.4 million, composed of non-commercial ($7.2-$12.9 million) and commercial ($2.97 million licensed + $148,500-$445,500 unlicensed) catch. Hawaii’s nearshore fisheries provide >7 million meals annually, with most (>5 million) from the non-commercial sector. Over a third (36%) of meals were planktivores, 26% piscivores, 21% primary consumers, and 18% secondary consumers. Only 62% of licensed commercial catch is accounted for in purchase reports, leaving 38% of landings unreported in sales. Value chains are complex, with major buyers for the commercial fishery including grocery stores (66%), retailers (19%), wholesalers (14%), and restaurants (<1%), who also trade and sell amongst themselves. The bulk of total nearshore catch (72–74%) follows a short value chain, with non-commercial fishers keeping catch for household consumption or community sharing. A small amount (~37,000kg) of reef fish—the equivalent of 1.8% of local catch—is imported annually into Hawaiʻi, 23,000kg of which arrives as passenger luggage on commercial flights from Micronesia. Evidence of exports to the US mainland exists, but is unquantifiable given existing data. Hawaiian nearshore fisheries support fundamental cultural values including subsistence, activity, traditional knowledge, and social cohesion. These small-scale coral reef fisheries provide large-scale benefits to the economy, food security, and cultural practices of Hawaiʻi, underscoring the need for sustainable management. This research highlights the value of information on the value chain for small-scale production systems, making the hidden economy of these fisheries visible and illuminating a range of conservation interventions applicable to Hawaiʻi and beyond. PMID:28771508

Central Andes mountains, Chile/Argentina as seen from STS-67

NASA Technical Reports Server (NTRS)

1995-01-01

The Chilean coastline and the arid Atacama Desert stretch the length of the view with the high Andes on the eastern margin where hundreds of volcanoes dot the landscape. The wider (250-350 kilometers) Altiplano ('plains') sector of the Andes appears in the top half of the view, and the narrow (120 kilometers) 'mountain-chain-dominated' sector to the bottom. The northern half of Chile can be seen, with the 'hammer-head' peninsula at the city of Antofagasta, top left. Up welling of cold water as the Humboldt Current immediately offshore gives rise to low stratus cloud. The extensive cloud mass on the right lies beyond the Andes in the low country of Argentina's 'pampas' grasslands and Chaco semi-desert.

Assessing significance in a Markov chain without mixing.

PubMed

Chikina, Maria; Frieze, Alan; Pegden, Wesley

2017-03-14

We present a statistical test to detect that a presented state of a reversible Markov chain was not chosen from a stationary distribution. In particular, given a value function for the states of the Markov chain, we would like to show rigorously that the presented state is an outlier with respect to the values, by establishing a [Formula: see text] value under the null hypothesis that it was chosen from a stationary distribution of the chain. A simple heuristic used in practice is to sample ranks of states from long random trajectories on the Markov chain and compare these with the rank of the presented state; if the presented state is a [Formula: see text] outlier compared with the sampled ranks (its rank is in the bottom [Formula: see text] of sampled ranks), then this observation should correspond to a [Formula: see text] value of [Formula: see text] This significance is not rigorous, however, without good bounds on the mixing time of the Markov chain. Our test is the following: Given the presented state in the Markov chain, take a random walk from the presented state for any number of steps. We prove that observing that the presented state is an [Formula: see text]-outlier on the walk is significant at [Formula: see text] under the null hypothesis that the state was chosen from a stationary distribution. We assume nothing about the Markov chain beyond reversibility and show that significance at [Formula: see text] is best possible in general. We illustrate the use of our test with a potential application to the rigorous detection of gerrymandering in Congressional districting.

Assessing significance in a Markov chain without mixing

PubMed Central

Chikina, Maria; Frieze, Alan; Pegden, Wesley

2017-01-01

We present a statistical test to detect that a presented state of a reversible Markov chain was not chosen from a stationary distribution. In particular, given a value function for the states of the Markov chain, we would like to show rigorously that the presented state is an outlier with respect to the values, by establishing a p value under the null hypothesis that it was chosen from a stationary distribution of the chain. A simple heuristic used in practice is to sample ranks of states from long random trajectories on the Markov chain and compare these with the rank of the presented state; if the presented state is a 0.1% outlier compared with the sampled ranks (its rank is in the bottom 0.1% of sampled ranks), then this observation should correspond to a p value of 0.001. This significance is not rigorous, however, without good bounds on the mixing time of the Markov chain. Our test is the following: Given the presented state in the Markov chain, take a random walk from the presented state for any number of steps. We prove that observing that the presented state is an ε-outlier on the walk is significant at p=2ε under the null hypothesis that the state was chosen from a stationary distribution. We assume nothing about the Markov chain beyond reversibility and show that significance at p≈ε is best possible in general. We illustrate the use of our test with a potential application to the rigorous detection of gerrymandering in Congressional districting. PMID:28246331

Extending health insurance coverage to the informal sector: Lessons from a private micro health insurance scheme in Lagos, Nigeria.

PubMed

Peterson, Lauren; Comfort, Alison; Hatt, Laurel; van Bastelaer, Thierry

2018-04-15

As a growing number of low- and middle-income countries commit to achieving universal health coverage, one key challenge is how to extend coverage to informal sector workers. Micro health insurance (MHI) provides a potential model to finance health services for this population. This study presents lessons from a pilot study of a mandatory MHI plan offered by a private insurance company and distributed through a microfinance bank to urban, informal sector workers in Lagos, Nigeria. Study methods included a survey of microfinance clients, key informant interviews, and a review of administrative records. Demographic, health care seeking, and willingness-to-pay data suggested that microfinance clients, particularly women, could benefit from a comprehensive MHI plan that improved access to health care and reduced out-of-pocket spending on health services. However, administrative data revealed declining enrollment, and key informant interviews further suggested low use of the health insurance plan. Key implementation challenges, including changes to mandatory enrollment requirements, insufficient client education and marketing, misaligned incentives, and weak back-office systems, undermined enrollment and use of the plan. Mandatory MHI plans, intended to mitigate adverse selection and facilitate private insurers' entry into new markets, present challenges for covering informal sector workers, including when distributed through agents such as a microfinance bank. Properly aligning the incentives of the insurer and the agent are critical to effectively distribute and service insurance. Further, an urban environment presents unique challenges for distributing MHI, addressing client perceptions of health insurance, and meeting their health care needs. Copyright © 2018 John Wiley & Sons, Ltd.

Photovoltaic technology for sustainability: An investigation of the distributed utility concept as a policy framework

NASA Astrophysics Data System (ADS)

Letendre, Steven Emery

The U.S. electric utility sector in its current configuration is unsustainable. The majority of electricity in the United States is produced using finite fossil fuels. In addition, significant potential exists to improve the nation's efficient use of energy. A sustainable electric utility sector will be characterized by increased use of renewable energy sources and high levels of end-use efficiency. This dissertation analyzes two alternative policy approaches designed to move the U.S. electric utility sector toward sustainability. One approach is labeled incremental which involves maintaining the centralized structure of the electric utility sector but facilitating the introduction of renewable energy and efficiency into the electrical system through the pricing mechanism. A second policy approach was described in which structural changes are encouraged based on the emerging distributed utility (DU) concept. A structural policy orientation attempts to capture the unique localized benefits that distributed renewable resources and energy efficiency offer to electric utility companies and their customers. A market penetration analysis of PV in centralized energy supply and distributed peak-shaving applications is conducted for a case-study electric utility company. Sensitivity analysis was performed based on incremental and structural policy orientations. The analysis provides compelling evidence which suggests that policies designed to bring about structural change in the electric utility sector are needed to move the industry toward sustainability. Specifically, the analysis demonstrates that PV technology, a key renewable energy option likely to play an important role in a renewable energy future, will begin to penetrate the electrical system in distributed peak-shaving applications long before the technology is introduced as a centralized energy supply option. Most policies to date, which I term incremental, attempt to encourage energy efficiency and renewables through the pricing system. Based on past policy experience, it is unlikely that such an approach would allow PV to compete in Delaware as an energy supply option in the next ten to twenty years. Alternatively, a market-based, or green pricing, approach will not create significant market opportunities for PV as a centralized energy supply option. However, structural policies designed to encourage the explicit recognition of the localized benefits of distributed resources could result in PV being introduced into the electrical system early in the next century.

Numerical Study of the Role of Microphysical Latent Heating and Surface Heat Fluxes in a Severe Precipitation Event in the Warm Sector over Southern China

NASA Astrophysics Data System (ADS)

Yin, Jin-Fang; Wang, Dong-Hai; Liang, Zhao-Ming; Liu, Chong-Jian; Zhai, Guo-Qing; Wang, Hong

2018-02-01

Simulations of the severe precipitation event that occurred in the warm sector over southern China on 08 May 2014 are conducted using the Advanced Weather Research and Forecasting (WRF-ARWv3.5.1) model to investigate the roles of microphysical latent heating and surface heat fluxes during the severe precipitation processes. At first, observations from surface rain gauges and ground-based weather radars are used to evaluate the model outputs. Results show that the spatial distribution of 24-h accumulated precipitation is well reproduced, and the temporal and spatial distributions of the simulated radar reflectivity agree well with the observations. Then, several sensitive simulations are performed with the identical model configurations, except for different options in microphysical latent heating and surface heat fluxes. From the results, one of the significant findings is that the latent heating from warm rain microphysical processes heats the atmosphere in the initial phase of the precipitation and thus convective systems start by self-triggering and self-organizing, despite the fact that the environmental conditions are not favorable to the occurrence of precipitation event at the initial phase. In the case of the severe precipitation event over the warm sector, both warm and ice microphysical processes are active with the ice microphysics processes activated almost two hours later. According to the sensitive results, there is a very weak precipitation without heavy rainfall belt when microphysical latent heating is turned off. In terms of this precipitation event, the warm microphysics processes play significant roles on precipitation intensity, while the ice microphysics processes have effects on the spatial distribution of precipitation. Both surface sensible and latent heating have effects on the precipitation intensity and spatial distribution. By comparison, the surface sensible heating has a strong influence on the spatial distribution of precipitation, and the surface latent heating has only a slight impact on the precipitation intensity. The results indicate that microphysical latent heating might be an important factor for severe precipitation forecast in the warm sector over southern China. Surface sensible heating can have considerable influence on the precipitation spatial distribution and should not be neglected in the case of weak large-scale conditions with abundant water vapor in the warm sector.

Detection Methodologies for Pathogen and Toxins: A Review.

PubMed

Alahi, Md Eshrat E; Mukhopadhyay, Subhas Chandra

2017-08-16

Pathogen and toxin-contaminated foods and beverages are a major source of illnesses, even death, and have a significant economic impact worldwide. Human health is always under a potential threat, including from biological warfare, due to these dangerous pathogens. The agricultural and food production chain consists of many steps such as harvesting, handling, processing, packaging, storage, distribution, preparation, and consumption. Each step is susceptible to threats of environmental contamination or failure to safeguard the processes. The production process can be controlled in the food and agricultural sector, where smart sensors can play a major role, ensuring greater food quality and safety by low cost, fast, reliable, and profitable methods of detection. Techniques for the detection of pathogens and toxins may vary in cost, size, and specificity, speed of response, sensitivity, and precision. Smart sensors can detect, analyse and quantify at molecular levels contents of different biological origin and ensure quality of foods against spiking with pesticides, fertilizers, dioxin, modified organisms, anti-nutrients, allergens, drugs and so on. This paper reviews different methodologies to detect pathogens and toxins in foods and beverages.

Dynamics starting at a conical intersection: Application to the photochemistry of pyrrole

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sellner, Bernhard; Barbatti, Mario; Lischka, Hans

The photochemical ring opening process in pyrrole has been investigated by performing classical on-the-fly dynamics using the multiconfiguration self-consistent field method for the computation of energies and energy gradients. As starting point for the dynamics the conical intersection corresponding to the ring-puckered ring-opened structure, determined previously [Barbatti et al., J. Chem. Phys. 125, 164323 (2006)], has been chosen. Two sets of initial conditions for the nuclear velocities were constructed: (i) nuclear velocities in the branching (g,h) plane of the conical intersection and (ii) statistical distribution for all atoms. Both sets of initial conditions show very similar results. Reactive trajectories aremore » only found in a very limited sector in the (g,h) plane and reaction products are very similar. Within the simulation time of 1 ps, ring opening of pyrrole to the biradical NH=CH-CH-CH=CH chain followed by ring closure to a substituted cyclopropene structure (NH=CH-C{sub 3}H{sub 3}) is observed. The computed structural data correlate well with the experimentally observed dissociation products.« less

Variable dose rate single-arc IMAT delivered with a constant dose rate and variable angular spacing

NASA Astrophysics Data System (ADS)

Tang, Grace; Earl, Matthew A.; Yu, Cedric X.

2009-11-01

Single-arc intensity-modulated arc therapy (IMAT) has gained worldwide interest in both research and clinical implementation due to its superior plan quality and delivery efficiency. Single-arc IMAT techniques such as the Varian RapidArc™ deliver conformal dose distributions to the target in one single gantry rotation, resulting in a delivery time in the order of 2 min. The segments in these techniques are evenly distributed within an arc and are allowed to have different monitor unit (MU) weightings. Therefore, a variable dose-rate (VDR) is required for delivery. Because the VDR requirement complicates the control hardware and software of the linear accelerators (linacs) and prevents most existing linacs from delivering IMAT, we propose an alternative planning approach for IMAT using constant dose-rate (CDR) delivery with variable angular spacing. We prove the equivalence by converting VDR-optimized RapidArc plans to CDR plans, where the evenly spaced beams in the VDR plan are redistributed to uneven spacing such that the segments with larger MU weighting occupy a greater angular interval. To minimize perturbation in the optimized dose distribution, the angular deviation of the segments was restricted to <=± 5°. This restriction requires the treatment arc to be broken into multiple sectors such that the local MU fluctuation within each sector is reduced, thereby lowering the angular deviation of the segments during redistribution. The converted CDR plans were delivered with a single gantry sweep as in the VDR plans but each sector was delivered with a different value of CDR. For four patient cases, including two head-and-neck, one brain and one prostate, all CDR plans developed with the variable spacing scheme produced similar dose distributions to the original VDR plans. For plans with complex angular MU distributions, the number of sectors increased up to four in the CDR plans in order to maintain the original plan quality. Since each sector was delivered with a different dose rate, extra mode-up time (xMOT) was needed between the transitions of the successive sectors during delivery. On average, the delivery times of the CDR plans were approximately less than 1 min longer than the treatment times of the VDR plans, with an average of about 0.33 min of xMOT per sector transition. The results have shown that VDR may not be necessary for single-arc IMAT. Using variable angular spacing, VDR RapidArc plans can be implemented into the clinics that are not equipped with the new VDR-enabled machines without compromising the plan quality or treatment efficiency. With a prospective optimization approach using variable angular spacing, CDR delivery times can be further minimized while maintaining the high delivery efficiency of single-arc IMAT treatment.

Intelligence Support to Supply Chain Risk Management

DTIC Science & Technology

2012-06-01

of Master of Science in Operations Analysis Charles L. Carter, MA Major, USAF June 2012 DISTRIBUTION STATEMENT A. APPROVED FOR...literature regarding supply chain risk management and intelligence doctrine. This review established the importance of supply chain risk analysis to...risk analysis . This research culminated in the development of a methodology for intelligence professionals to use to support supply chain risk

Implementing Interoperability in the Seafood Industry: Learning from Experiences in Other Sectors.

PubMed

Bhatt, Tejas; Gooch, Martin; Dent, Benjamin; Sylvia, Gilbert

2017-08-01

Interoperability of communication and information technologies within and between businesses operating along supply chains is being pursued and implemented in numerous industries worldwide to increase the efficiency and effectiveness of operations. The desire for greater interoperability is also driven by the need to reduce business risk through more informed management decisions. Interoperability is achieved by the development of a technology architecture that guides the design and implementation of communication systems existing within individual businesses and between businesses comprising the supply chain. Technology architectures are developed through a purposeful dialogue about why the architecture is required, the benefits and opportunities that the architecture offers the industry, and how the architecture will translate into practical results. An assessment of how the finance, travel, and health industries and a sector of the food industry-fresh produce-have implemented interoperability was conducted to identify lessons learned that can aid the development of interoperability in the seafood industry. The findings include identification of the need for strong, effective governance during the establishment and operation of an interoperability initiative to ensure the existence of common protocols and standards. The resulting insights were distilled into a series of principles for enabling syntactic and semantic interoperability in any industry, which we summarize in this article. Categorized as "structural," "operational," and "integrative," the principles describe requirements and solutions that are pivotal to enabling businesses to create and capture value from full chain interoperability. The principles are also fundamental to allowing governments and advocacy groups to use traceability for public good. © 2017 Institute of Food Technologists®.

Universal immunization in urban areas: Calcutta's success story.

PubMed

Chaudhuri, E R

1990-01-01

The Central Government of Calcutta, India aimed to immunize 85% (85,262) of the city's 12 month old infants against polio, diphtheria, measles, tuberculosis, pertussis and tetanus. The Universal Immunization Program (UIP) achieved this target 3 months earlier than intended. In fact, at the end of December 1990, it achieved 110.6% for DPT3, 142.16% for OPV3, 151.96% for BCG, and 97% for measles. UIP was able to surpass its targets by emphasizing team work. Government, the private sector, UNICEF, and the voluntary sector made up the Apex Coordination Committee on Immunization headed up by the mayor. The committee drafted an action plan which included routine immunization sessions on a fixed day and intensive immunization drives. Further the involved organizations pooled together cold chain equipment. In addition, the District Family Welfare Bureau was the distribution center for vaccines, syringes, immunization cards, report formats, vaccine carriers, and ice packs. Health workers administered immunizations from about 300 centers generally on Wednesday, National Immunization Day. Intensive immunization drives focused on measles immunizations. UIP leaders encouraged all center to routinely record coverage and submit monthly progress reports to the District Family Welfare Bureau. The Calcutta Municipal Corporation coordinated promotion activities and social mobilization efforts. Promotion included radio and TV announcements, newspaper advertisements, cinema slides, billboards, and posters. The original UIP plan to use professional communicators to mobilize communities was ineffective, so nongovernmental organizations entered the slums to encourage people to encourage their neighbors to immunize their children. Further Islamic, Protestant, and Catholic leaders encouraged the faithful to immunize their children. A UNICEF officer noted that this success must be sustained, however.

A New Security Paradigm for Anti-Counterfeiting: Guidelines and an Implementation Roadmap

NASA Astrophysics Data System (ADS)

Lehtonen, Mikko

Product counterfeitingand piracy continue to plague brand and trademark owners across industry sectors. This chapter analyses the reasons for ineffectiveness of past technical anti-counterfeitingstrategies and formulates managerial guidelines for effective use of RFID in anti-counterfeiting. An implementation roadmap toward secure authentication of products tagged with EPC Gen-2 tags is proposed and possible supply chain locations for product checks are discussed.

Validating Advanced Supply-Chain Technology (VAST)

DTIC Science & Technology

2004-06-01

Use philosophy that is so important in today’s procurement environment. Electronic Data Interchange (EDI) and eCommerce is proving to be a major...the STEPwise methodology are particularly encouraging. These new EDI and eCommerce technologies are becoming more important with the customers who...critical assumption is based upon the 55 fact that eCommerce is growing throughout the commercial and military sector and those who are not

Determinants of Motivation in Teachers: A Study of Private Secondary Schools Chain Networks in Bahawalpur

ERIC Educational Resources Information Center

Nawaz, Nosheen; Yasin, Hina

2015-01-01

Retaining quality employees is the dream of every organization. This research focuses on a big issue arising in the education sector. A large number of teachers are incoming and leaving the private schools of Bahawalpur. Lack of motivation is a major cause of teachers' turnover. Aspire of this research is to find the factors which can motivate…

Estimating the Benefits of the Air Force Purchasing and Supply Chain Management Initiative

DTIC Science & Technology

2008-01-01

sector, known as strategic sourcing.6 The Customer Relationship Management initiative ( CRM ) pro- vides a single customer point of contact for all... Customer Relationship Management initiative. commodity council A term used to describe a cross-functional sourc- ing group charged with formulating a...initiative has four major components, all based on commercial best practices (Gabreski, 2004): commodity councils customer relationship management

San Francisco Bay Area Environmental Education Needs Study.

ERIC Educational Resources Information Center

Fish, Duane

To identify environmental technician positions in the public and private sectors of the San Francisco Bay Area as well as to determine the skills and knowledge necessary for employment in the field, questionnaires were distributed to companies, agencies, individuals of the private sector in the area, and 33 institutions offering an Occupational…

Competition, Jobs, and Information Policy: The Case for Private-Sector Information Services: U.S. Patents.

ERIC Educational Resources Information Center

Ebersole, Joseph L.

1994-01-01

Discusses the argument for private-sector involvement in the distribution of government information, using U.S. patents as an example. Highlights include industry competitiveness; jobs creation; public access; identifying users; costs; user fees; existing systems of information dissemination; and implications of the Internet and NREN (National…

77 FR 48499 - U.S. Multi-Sector Trade Mission to South India and Sri Lanka Chennai and Cochin, India and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... losses in India's transmission and distribution sector exceed 30%, which ranks among the highest rates of... Sri Lanka boost their infrastructure and building requirements. Target subsectors holding high.... The availability of electricity, fresh water, long coastline, backwaters, good banking facilities...

Investigating Students' Attitudes towards Private Sector Work during Study in Saudi Arabia

ERIC Educational Resources Information Center

Al-asqah, Amnah

2018-01-01

Purpose: The purpose of this paper is to identify the students' attitudes towards private sector work during study. Design/methodology/approach: This study used a comprehensive social survey (including questionnaire and interviewing) distributed to experts in departments and colleges in King Saud University and Princess Nora University. Findings:…

Channel characteristics and coordination in three-echelon dual-channel supply chain

NASA Astrophysics Data System (ADS)

Saha, Subrata

2016-02-01

We explore the impact of channel structure on the manufacturer, the distributer, the retailer and the entire supply chain by considering three different channel structures in radiance of with and without coordination. These structures include a traditional retail channel and two manufacturer direct channels with and without consistent pricing. By comparing the performance of the manufacturer, the distributer and the retailer, and the entire supply chain in three different supply chain structures, it is established analytically that, under some conditions, a dual channel can outperform a single retail channel; as a consequence, a coordination mechanism is developed that not only coordinates the dual channel but also outperforms the non-cooperative single retail channel. All the analytical results are further analysed through numerical examples.

[Micro-simulation of firms' heterogeneity on pollution intensity and regional characteristics].

PubMed

Zhao, Nan; Liu, Yi; Chen, Ji-Ning

2009-11-01

In the same industrial sector, heterogeneity of pollution intensity exists among firms. There are some errors if using sector's average pollution intensity, which are calculated by limited number of firms in environmental statistic database to represent the sector's regional economic-environmental status. Based on the production function which includes environmental depletion as input, a micro-simulation model on firms' operational decision making is proposed. Then the heterogeneity of firms' pollution intensity can be mechanically described. Taking the mechanical manufacturing sector in Deyang city, 2005 as the case, the model's parameters were estimated. And the actual COD emission intensities of environmental statistic firms can be properly matched by the simulation. The model's results also show that the regional average COD emission intensity calculated by the environmental statistic firms (0.002 6 t per 10 000 yuan fixed asset, 0.001 5 t per 10 000 yuan production value) is lower than the regional average intensity calculated by all the firms in the region (0.003 0 t per 10 000 yuan fixed asset, 0.002 3 t per 10 000 yuan production value). The difference among average intensities in the six counties is significant as well. These regional characteristics of pollution intensity attribute to the sector's inner-structure (firms' scale distribution, technology distribution) and its spatial deviation.

Chained Kullback-Leibler Divergences

PubMed Central

Pavlichin, Dmitri S.; Weissman, Tsachy

2017-01-01

We define and characterize the “chained” Kullback-Leibler divergence minw D(p‖w) + D(w‖q) minimized over all intermediate distributions w and the analogous k-fold chained K-L divergence min D(p‖wk−1) + … + D(w2‖w1) + D(w1‖q) minimized over the entire path (w1,…,wk−1). This quantity arises in a large deviations analysis of a Markov chain on the set of types – the Wright-Fisher model of neutral genetic drift: a population with allele distribution q produces offspring with allele distribution w, which then produce offspring with allele distribution p, and so on. The chained divergences enjoy some of the same properties as the K-L divergence (like joint convexity in the arguments) and appear in k-step versions of some of the same settings as the K-L divergence (like information projections and a conditional limit theorem). We further characterize the optimal k-step “path” of distributions appearing in the definition and apply our findings in a large deviations analysis of the Wright-Fisher process. We make a connection to information geometry via the previously studied continuum limit, where the number of steps tends to infinity, and the limiting path is a geodesic in the Fisher information metric. Finally, we offer a thermodynamic interpretation of the chained divergence (as the rate of operation of an appropriately defined Maxwell’s demon) and we state some natural extensions and applications (a k-step mutual information and k-step maximum likelihood inference). We release code for computing the objects we study. PMID:29130024

Understanding and reducing the risk of supply chain disruptions.

PubMed

Clark, Graham

2012-01-01

Natural disasters can wreck havoc on business operations. When civil unrest swept the UK in August 2011, the effect on business was stark, losing the retail sector £300m in unexpected costs and lost revenues. On the other side of the world, the natural disaster that hit Japan in early 2011 is estimated to have run up costs in the region of £189bn in repairs. Beyond this, the earthquake and its aftermath shattered supply chains, with technology companies expecting delays of up to six months before business could resume fully. It is impossible to predict incidents like these, but businesses can help mitigate disruption in the supply chain by undertaking business continuity management (BCM). A flexible supply chain is essential when it comes to BCM - whether it means being able to cope with altering transport routes at short notice, or finding or replacing a supplier at the last minute. Understanding the supply chain is critical when responding to major impacts that affect supply chains in multiple points - like IT system failures and country-wide fuel strikes. Businesses should carry out detailed business impact assessments and risk assessments right across the end-to-end supply chain and not just at key single points of failure. It is an intensive process that needs dedicated resources and ownership at the highest level. Recognising this, DHL has designed a 10-step process, which it has implemented across its global supply chain business. This paper provides an overview of what a supply chain really looks like, what can cause disruptions and how far up/down the supply chain companies need to go with their BCM planning.

Developing cross-sectoral quality assurance for cataract surgery in the statutory quality assurance program of the German health care system: Experiences and lessons learned.

PubMed

Bramesfeld, Anke; Pauletzki, Jürgen; Behrenz, Lars; Szecsenyi, Joachim; Willms, Gerald; Broge, Björn

2015-08-01

Since 2001, statutory external quality assurance (QA) for hospital care has been in place in the German health system. In 2009, the decision was taken to expand it to cross-sectoral procedures. This novel and unprecedented form of national QA aims at (1) making the quality procedures comparable that are provided both in inpatient and outpatient care, (2) following-up outcomes of hospital care after patients' discharge and (3) measuring the quality of complex treatment chains across interfaces. As a pioneer procedure a QA procedure in cataract surgery QA was developed. Using this as an example, challenges of cross-sectoral QA are highlighted. These challenges relate, in particular, to three technical problems: triggering cases for documentation, following-up patients' after hospital discharge, and the burden of documentation in outpatient care. These problems resulted finally in the haltering of the development of the QA procedure. However, the experiences gained with this first development of cross-sectoral QA inspired the reorientation and further development of the field in Germany. Future cross-sectoral QA will rigorously aim at keeping burden of documentation small. It will draw data for QA mainly at three sources: routine data, patient surveys and peer reviews using indicators. Policy implications of this reorientation are discussed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Vaccine supply chains need to be better funded and strengthened, or lives will be at risk.

PubMed

Kaufmann, Judith R; Miller, Roger; Cheyne, James

2011-06-01

In the next decade, at least twelve additional vaccines that target such diseases as typhoid, malaria, and dengue will become available to lower- and middle-income countries. These vaccines must travel along what are called supply chains, which include all personnel, systems, equipment, and activities involved in ensuring that vaccines are effectively delivered from the point of production to the people who need them. But for various reasons, supply chains are already strained in many developing countries, and the potential inability to distribute new vaccines will place lives at risk. Among the many steps needed to strengthen the global vaccine supply chain, we suggest that the international community pursue improved coordination between organizations that donate and ship vaccines and the host-country officials who receive and distribute the vaccines, as well as better training for supply-chain managers.

Monte Carlo estimation of total variation distance of Markov chains on large spaces, with application to phylogenetics.

PubMed

Herbei, Radu; Kubatko, Laura

2013-03-26

Markov chains are widely used for modeling in many areas of molecular biology and genetics. As the complexity of such models advances, it becomes increasingly important to assess the rate at which a Markov chain converges to its stationary distribution in order to carry out accurate inference. A common measure of convergence to the stationary distribution is the total variation distance, but this measure can be difficult to compute when the state space of the chain is large. We propose a Monte Carlo method to estimate the total variation distance that can be applied in this situation, and we demonstrate how the method can be efficiently implemented by taking advantage of GPU computing techniques. We apply the method to two Markov chains on the space of phylogenetic trees, and discuss the implications of our findings for the development of algorithms for phylogenetic inference.

Forecasting Workload for Defense Logistics Agency Distribution

DTIC Science & Technology

2014-12-01

Distribution workload ...........................18 Monthly DD Sales for the four primary supply chains ( Avn , Land, Maritime, Ind HW) plotted to...average AVN Aviation BSM Business Systems Modernization CIT consumable items transfer C&E Construction and Equipment C&T Clothing...992081.437 See Figure 2 below for the graphical output of the linear regression. Monthly DD Sales for the four primary supply chains ( Avn , Land

The Impact of Supply Chain Business Processes on Competitive Advantage and Organizational Performance

DTIC Science & Technology

2012-03-22

Manager, Vice President (VP) Distribution & Fulfillment, Transportation Manager, VP of Supply Chain Management, Production Manager, Director of...Logistics/ Transportation /Distribution (75%), and Supply/Purchasing/Procurement (25%) were identified as functions that best describe the respondents...manufacturing industry (50%), one respondent represented the wholesale trade (12.5%), the retail trade (12.5%), and the transportation and warehousing

Demonstrating the Effect of Supply Chain Disruptions through an Online Beer Distribution Game

ERIC Educational Resources Information Center

Sarkar, Sourish; Kumar, Sanjay

2016-01-01

This article describes a classroom tool to teach the impact of supply chain disruptions and mitigation strategies based on information sharing and collaboration. The tool is an adaptation of the Beer Distribution Game, is easy to play, and can be hosted online or on local servers. The game considers several scenarios based on the location of the…

Modeling logistic performance in quantitative microbial risk assessment.

PubMed

Rijgersberg, Hajo; Tromp, Seth; Jacxsens, Liesbeth; Uyttendaele, Mieke

2010-01-01

In quantitative microbial risk assessment (QMRA), food safety in the food chain is modeled and simulated. In general, prevalences, concentrations, and numbers of microorganisms in media are investigated in the different steps from farm to fork. The underlying rates and conditions (such as storage times, temperatures, gas conditions, and their distributions) are determined. However, the logistic chain with its queues (storages, shelves) and mechanisms for ordering products is usually not taken into account. As a consequence, storage times-mutually dependent in successive steps in the chain-cannot be described adequately. This may have a great impact on the tails of risk distributions. Because food safety risks are generally very small, it is crucial to model the tails of (underlying) distributions as accurately as possible. Logistic performance can be modeled by describing the underlying planning and scheduling mechanisms in discrete-event modeling. This is common practice in operations research, specifically in supply chain management. In this article, we present the application of discrete-event modeling in the context of a QMRA for Listeria monocytogenes in fresh-cut iceberg lettuce. We show the potential value of discrete-event modeling in QMRA by calculating logistic interventions (modifications in the logistic chain) and determining their significance with respect to food safety.

Distribution of Base Pair Alternations in a Periodic DNA Chain: Application of Pólya Counting to a Physical System

NASA Astrophysics Data System (ADS)

Hillebrand, Malcolm; Paterson-Jones, Guy; Kalosakas, George; Skokos, Charalampos

2018-03-01

In modeling DNA chains, the number of alternations between Adenine-Thymine (AT) and Guanine-Cytosine (GC) base pairs can be considered as a measure of the heterogeneity of the chain, which in turn could affect its dynamics. A probability distribution function of the number of these alternations is derived for circular or periodic DNA. Since there are several symmetries to account for in the periodic chain, necklace counting methods are used. In particular, Polya's Enumeration Theorem is extended for the case of a group action that preserves partitioned necklaces. This, along with the treatment of generating functions as formal power series, allows for the direct calculation of the number of possible necklaces with a given number of AT base pairs, GC base pairs and alternations. The theoretically obtained probability distribution functions of the number of alternations are accurately reproduced by Monte Carlo simulations and fitted by Gaussians. The effect of the number of base pairs on the characteristics of these distributions is also discussed, as well as the effect of the ratios of the numbers of AT and GC base pairs.

Spatial and vertical distribution of short chain chlorinated paraffins in soils from wastewater irrigated farmlands.

PubMed

Zeng, Lixi; Wang, Thanh; Han, Wenya; Yuan, Bo; Liu, Qian; Wang, Yawei; Jiang, Guibin

2011-03-15

Chlorinated paraffins (CPs) are one of the most complex groups of halogenated contaminants in the environment. However, studies of short chain CPs (SCCPs) in China are very scarce. In this study, the concentrations and distribution of SCCPs in farm soils from a wastewater irrigated area in China were investigated. SCCPs were detected in all topsoil samples, with the sum of the concentrations (ΣSCCPs) in the range of 159.9-1450 ng/g (dry weight, dw). A noticeable spatial trend and specific congener distribution were observed in the wastewater irrigated farmland. Soil vertical profiles showed that ΣSCCP concentrations below the plowed layer decreased exponentially and had a significant positive relationship (R(2) > 0.83) with total organic carbon in soil cores. Furthermore, soil vertical distributions indicated that lower chlorinated (Cl(5-6)) and shorter chain (C(10-12)) congeners are more prone to migrate to deeper soil layers compared to highly chlorinated and longer chain congeners. This work demonstrated that effluents from sewage treatment plants (STPs) could be a significant source of SCCPs to the ambient environment and wastewater irrigation can lead to higher accumulation of SCCPs in farm soils.

Mirror instability and origin of morningside auroral structure

NASA Technical Reports Server (NTRS)

Chiu, Y. T.; Schulz, M.; Fennell, J. F.; Kishi, A. M.

1983-01-01

Auroral optical imagery shows marked differences between auroral features of the evening and morning sectors: the separation between diffuse and discrete auroras in the evening sector is not distinct in the morning sector, which is dominated by auroral patches and multiple banded structures aligned along some direction. Plasma distribution function signatures also show marked differences: downward electron beams and inverted-V signatures prefer the evening sector, while the electron spectra on the morning sector are similar to the diffuse aurora. A theory of morningside auroras consistent with these features was constructed. The theory is based on modulation of the growth rates of electron cyclotron waves by the mirror instability, which is in turn driven by inward-convected ions that have become anisotropic. This modulation produces alternating bands of enhanced and reduced electron precipitation which approximate the observed multiple auroral bands and patches of the morning sector.

Sector and Sphere: the design and implementation of a high-performance data cloud

PubMed Central

Gu, Yunhong; Grossman, Robert L.

2009-01-01

Cloud computing has demonstrated that processing very large datasets over commodity clusters can be done simply, given the right programming model and infrastructure. In this paper, we describe the design and implementation of the Sector storage cloud and the Sphere compute cloud. By contrast with the existing storage and compute clouds, Sector can manage data not only within a data centre, but also across geographically distributed data centres. Similarly, the Sphere compute cloud supports user-defined functions (UDFs) over data both within and across data centres. As a special case, MapReduce-style programming can be implemented in Sphere by using a Map UDF followed by a Reduce UDF. We describe some experimental studies comparing Sector/Sphere and Hadoop using the Terasort benchmark. In these studies, Sector is approximately twice as fast as Hadoop. Sector/Sphere is open source. PMID:19451100

Optimal policy for mitigating emissions in the European transport sector

NASA Astrophysics Data System (ADS)

Leduc, Sylvain; Piera, Patrizio; Sennai, Mesfun; Igor, Staritsky; Berien, Elbersen; Tijs, Lammens; Florian, Kraxner

2017-04-01

A geographic explicit techno-economic model, BeWhere (www.iiasa.ac.at/bewhere), has been developed at the European scale (Europe 28, the Balkans countries, Turkey, Moldavia and Ukraine) at a 40km grid size, to assess the potential of bioenergy from non-food feedstock. Based on the minimization of the supply chain from feedstock collection to the final energy product distribution, the model identifies the optimal bioenergy production plants in terms of spatial location, technology and capacity. The feedstock of interests are woody biomass (divided into eight types from conifers and non-conifers) and five different crop residuals. For each type of feedstock, one or multiple technologies can be applied for either heat, electricity or biofuel production. The model is run for different policy tools such as carbon cost, biofuel support, or subsidies, and the optimal mix of technologies and biomass needed is optimized to reach a production cost competitive against the actual reference system which is fossil fuel based. From this approach, the optimal mix of policy tools that can be applied country wide in Europe will be identified. The preliminary results show that high carbon tax and biofuel support contribute to the development of large scale biofuel production based on woody biomass plants mainly located in the northern part of Europe. Finally the highest emission reduction is reached with low biofuel support and high carbon tax evenly distributed in Europe.

Trends of anthropogenic mercury emissions from 1970-2008 using the global EDGARv4 database: the role of increasing emission mitigation by the energy sector and the chlor-alkali industry

NASA Astrophysics Data System (ADS)

Muntean, M.; Janssens-Maenhout, G.; Olivier, J. G.; Guizzardi, D.; Dentener, F. J.

2012-12-01

The Emission Database for Global Atmospheric Research (EDGAR) describes time-series of emissions of man-made greenhouse gases and short-lived atmospheric pollutants from 1970-2008. EDGARv4 is continuously updated to respond to needs of both the scientific community and environmental policy makers. Mercury, a toxic pollutant with bioaccumulation properties, is included in the forthcoming EDGARv4.3 release, thereby enriching the spectrum of multi-pollutant sources. Three different forms of mercury have been distinguished: gaseous elemental mercury (Hg0), divalent mercury compounds (Hg2+) and particulate associated mercury (Hg-P). A complete inventory of mercury emission sources has been developed at country level using the EDGAR technology-based methodology together with international activity statistics, technology-specific abatement measures, and emission factors from EMEP/EEA (2009), USEPA AP 42 and the scientific literature. A comparison of the EDGAR mercury emission data to the widely used UNEP inventory shows consistent emissions across most sectors compared for the year 2005. The different shares of mercury emissions by region and by sector will be presented with special emphasis on the region-specific mercury emission mitigation potential. We provide a comprehensive ex-post analysis of the mitigation of mercury emissions by respectively end-of-pipe abatement measures in the power generation sector and technology changes in the chlor-alkali industry between 1970 and 2008. Given the local scale impacts of mercury, we have paid special attention to the spatial distribution of emissions. The default EDGAR Population proxy data was only used to distribute emissions from the residential and solid waste incineration sectors. Other sectors use point source data of power plants, industrial plants, gold and mercury mines. The 2008 mercury emission distribution will be presented, which shows emissions hot-spots on a 0.1°x0.1°resolution gridmap.

A Markov Chain-based quantitative study of angular distribution of photons through turbid slabs via isotropic light scattering

NASA Astrophysics Data System (ADS)

Li, Xuesong; Northrop, William F.

2016-04-01

This paper describes a quantitative approach to approximate multiple scattering through an isotropic turbid slab based on Markov Chain theorem. There is an increasing need to utilize multiple scattering for optical diagnostic purposes; however, existing methods are either inaccurate or computationally expensive. Here, we develop a novel Markov Chain approximation approach to solve multiple scattering angular distribution (AD) that can accurately calculate AD while significantly reducing computational cost compared to Monte Carlo simulation. We expect this work to stimulate ongoing multiple scattering research and deterministic reconstruction algorithm development with AD measurements.

The Ultrasensitivity of Living Polymers

NASA Astrophysics Data System (ADS)

O'Shaughnessy, Ben; Vavylonis, Dimitrios

2003-03-01

Synthetic and biological living polymers are self-assembling chains whose chain length distributions (CLDs) are dynamic. We show these dynamics are ultrasensitive: Even a small perturbation (e.g., temperature jump) nonlinearly distorts the CLD, eliminating or massively augmenting short chains. The origin is fast relaxation of mass variables (mean chain length, monomer concentration) which perturbs CLD shape variables before these can relax via slow chain growth rate fluctuations. Viscosity relaxation predictions agree with experiments on the best-studied synthetic system, α-methylstyrene.

Modified allocation capacitated planning model in blood supply chain management

NASA Astrophysics Data System (ADS)

Mansur, A.; Vanany, I.; Arvitrida, N. I.

2018-04-01

Blood supply chain management (BSCM) is a complex process management that involves many cooperating stakeholders. BSCM involves four echelon processes, which are blood collection or procurement, production, inventory, and distribution. This research develops an optimization model of blood distribution planning. The efficiency of decentralization and centralization policies in a blood distribution chain are compared, by optimizing the amount of blood delivered from a blood center to a blood bank. This model is developed based on allocation problem of capacitated planning model. At the first stage, the capacity and the cost of transportation are considered to create an initial capacitated planning model. Then, the inventory holding and shortage costs are added to the model. These additional parameters of inventory costs lead the model to be more realistic and accurate.

Steric interactions determine side-chain conformations in protein cores.

PubMed

Caballero, D; Virrueta, A; O'Hern, C S; Regan, L

2016-09-01

We investigate the role of steric interactions in defining side-chain conformations in protein cores. Previously, we explored the strengths and limitations of hard-sphere dipeptide models in defining sterically allowed side-chain conformations and recapitulating key features of the side-chain dihedral angle distributions observed in high-resolution protein structures. Here, we show that modeling residues in the context of a particular protein environment, with both intra- and inter-residue steric interactions, is sufficient to specify which of the allowed side-chain conformations is adopted. This model predicts 97% of the side-chain conformations of Leu, Ile, Val, Phe, Tyr, Trp and Thr core residues to within 20°. Although the hard-sphere dipeptide model predicts the observed side-chain dihedral angle distributions for both Thr and Ser, the model including the protein environment predicts side-chain conformations to within 20° for only 60% of core Ser residues. Thus, this approach can identify the amino acids for which hard-sphere interactions alone are sufficient and those for which additional interactions are necessary to accurately predict side-chain conformations in protein cores. We also show that our approach can predict alternate side-chain conformations of core residues, which are supported by the observed electron density. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Spatial and temporal distribution of trunk-injected (14) C-imidacloprid in Fraxinus trees.

PubMed

Tanis, Sara R; Cregg, Bert M; Mota-Sanchez, David; McCullough, Deborah G; Poland, Therese M

2012-04-01

Since the discovery of Agrilus planipennis Fairmaire (emerald ash borer) in 2002, researchers have tested several methods of chemical control. Soil drench or trunk injection products containing imidacloprid are commonly used to control adults. However, efficacy can be highly variable and may be due to uneven translocation of systemic insecticides. The purpose of this study was to determine whether sectored xylem anatomy might influence imidacloprid distribution in tree crowns. Imidacloprid equivalent concentrations were higher in leaves from branches in the plane of the injection point (0°) than in leaves from branches on the opposite side of the injection point (180°). Leaves from branches 90° to the right of injection points had higher imidacloprid equivalent concentrations than leaves from branches 90° to the left of injection points. Leaves and shoots had higher imidacloprid equivalent concentrations than roots and trunk cores, indicating that imidacloprid moves primarily through the xylem. Imidacloprid equivalent concentration in leaves varied over time and in relation to injection points. It is concluded that ash trees have sectored 'zigzag' xylem architecture patterns consistent with sectored flow distribution. This could lead to variable distribution of imidacloprid in tree crowns and therefore to variable control of A. planipennis. Copyright © 2012 Society of Chemical Industry.

Surface Charging in the Auroral Zone on the DMSP Spacecraft in LEO

NASA Astrophysics Data System (ADS)

Anderson, Phillip C.

1998-11-01

A recent anomaly on the DMSP F13 spacecraft was attributed to an electrical malfunction caused by an electrostatic discharge on the vehicle associated with surface charging. It occurred during an intense energetic electron precipitation event (an auroral arc) within a region of very low plasma density in the auroral zone. A study of 1.5 year's worth of DMSP data from three satellites acquired during the recent minimum in the solar cycle has shown that such charging was a common occurrence with 704 charging events found. This is the result of significantly reduced background plasma densities associated with the solar minimum; smaller than ever previously experienced by the DMSP spacecraft. At times, the spacecraft charged for periods of 10s of seconds as they skimmed along an auroral arc instead of cutting across it. We show examples of the observed plasma density and the precipitating electron and ion spectra associated with the charging, and the MLT distribution and the seasonal distribution of the events. The preponderance of events occurred in the premidnight and morning sectors with two types of electron spectra being observed: a sharply peaked distribution indicative of field-aligned acceleration in the premidnight sector and a very hard distribution in the morning sector.

some morphological effects related to a non-uniform uplifting of crustal blocks in Northern Sicily (Central Mediterranean)

NASA Astrophysics Data System (ADS)

Nigro, Fabrizio; Renda, Pietro; Favara, Rocco

2010-05-01

We can distinguish two morphological evolutions of the drainage basins which develop in the earth's sectors subjected to uplift and tilting, in relationship to their antecedence or subsequence in comparison to the tectonic process. If this process begins in concomitance with a geomorphic cycle the main valleys of the drainage basins will longitudinally be developed according to the tilting direction which the crustal block is subjected. But if the non-uniform vertical movement develops in a sector already characterized by the presence of a idrographic network, this can be influenced in its pattern in various ways. A crustal block contemporarily subject to uplift and tilting will be characterized to its inside, at the end of this process, by more elevated and less elevated sectors. The erosive ground processes suffer this non-uniform vertical movement and since it gradually develops in time, landforms, as valleys of drainage basins, will suffer analogous variations. If pre-existing, the slopes of the valleys will be subjected to tilting also and one of the characteristics in the evolution of the reliefs connected with the uplift and the tilting of crustal blocks are represented by the progressive asymmetry of the slopes of a valley. The uplift and the tilting of the block progressively determines a difference of inclination of the slopes of the incising valley. This effect is given by the progressive incision and migration of the axis of the valley that it determines slopes with crests to different middle elevation between the right side and that left. The erosional process that determines him with the uplift and the tilting of the crustal blocks are characterized by a greater erosion rate in the sectors of head of the slope that is mostly raised. Likewise, the migration of the river consistent with the tilting direction determines a greater rate of erosion along one of the banks. The general morphometric result can be that of the individualization of slopes that -in section- constitute polylines assimilable to arcs of circumference with different rays of bending. In map view, the evolution of the drainage network is characterised also from a different development of the river channels of different orders. Particularly, in the slope that is more subject to uplift the drainage network is more branched, with larger formation of river orders with respect to the opposite slope. If we suppose that the crustal block underwent to uplift and tilting is eroded from several idrographic networks that are identified in more drainage basins, at the end of the process, in absence of large-scale deformations as folding and faulting, the slope asimmetry of every main valley is maintained but, for tilting direction about orthogonal with respect to the directions of the rivers, a different altimetric development will be observed of the main rivers. If to the tilting and uplift of the crustal block are associated internal deformations as folds and faults, then the asymmetry of the slopes not always may result clearly evident, as well as the altimetric development of the main valleys. Regarding the above concepts, we recognised a non-uniform uplift and large-scale recent faulting in Northern Sicily (Central Mediterranean), both from drainage network pattern analisys, slopes geometries and structural data. The data sets have been compared with the uplift rate and seismicity distributions, allowing us to recognise different crustal blocks in which the northern Sicily chain may be divided. Each chain block reflects characteristic morphometric pattern of the drainage basins. The morphostructural setting, the distribution of seismicity and the orientation of the recent faults indicate that the main neotectonic narrow deformation zones bounding the crustal blocks range from NW-SE, NE-SW and W-E.

76 FR 71994 - Advisory Committee on Commercial Operations of Customs and Border Protection (COAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-21

... recommendations on how to proceed on those topics: Subcommittee: The Global Supply Chain Security Land Border... document for public release.--Report by the Global Supply Chain Security Air Cargo Subcommittee. Status... surveys (IPR Partnership Program Survey and IPR Distribution Chain Management survey). Subcommittee...

Evidence on anti-malarial and diagnostic markets in Cambodia to guide malaria elimination strategies and policies.

PubMed

Phok, Sochea; Lek, Dysoley

2017-04-25

Understanding Cambodia's anti-malarial and diagnostic landscape in 2015 is critical for informing and monitoring strategies and policies as Cambodia moves forward with national efforts to eliminate malaria. The aim of this paper is to present timely and key findings on the public and private sector anti-malarial and diagnostic landscape in Cambodia. This evidence can serve as a baseline benchmark for guiding implementation of national strategies as well as other regional initiatives to address malaria elimination activities. From August 17th to October 1st, 2015, a cross sectional, nationally-representative malaria outlet survey was conducted in Cambodia. A census of all public and private outlets with potential to distribute malaria testing and/or treatment was conducted among 180 communes. An audit was completed for all anti-malarials, malaria rapid diagnostic tests (RDT) and microscopy. A total of 26,664 outlets were screened, and 1303 outlets were eligible and interviewed. Among all screened outlets in the public sector, 75.9% of public health facilities and 67.7% of community health workers stocked both malaria diagnostic testing and a first-line artemisinin-based combination therapy (ACT). Among anti-malarial-stocking private sector outlets, 64.7% had malaria blood testing available, and 70.9% were stocking a first-line ACT. Market share data illustrate that most of the anti-malarials were sold or distributed through the private sector (58.4%), including itinerant drug vendors (23.4%). First-line ACT accounted for the majority of the market share across the public and private sectors (90.3%). Among private sector outlets stocking any anti-malarial, the proportion of outlets with a first-line ACT or RDT was higher among outlets that had reportedly received one or more forms of 'support' (e.g. reportedly received training in the previous year on malaria diagnosis [RDT and/or microscopy] and/or the national treatment guidelines for malaria) compared to outlets that did not report receiving any support (ACT: 82.1 and 60.6%, respectively; RDT: 78.2 and 64.0%, respectively). The results point to high availability and distribution of first-line ACT and widespread availability of malaria diagnosis, especially in the public sector. This suggests that there is a strong foundation for achieving elimination goals in Cambodia. However, key gaps in terms of availability of malaria commodities for case management must be addressed, particularly in the private sector where most people seek treatment. Continued engagement with the private sector will be important to ensure accelerated progress towards malaria elimination.

A computer simulation of free-volume distributions and related structural properties in a model lipid bilayer.

PubMed Central

Xiang, T X

1993-01-01

A novel combined approach of molecular dynamics (MD) and Monte Carlo simulations is developed to calculate various free-volume distributions as a function of position in a lipid bilayer membrane at 323 K. The model bilayer consists of 2 x 100 chain molecules with each chain molecule having 15 carbon segments and one head group and subject to forces restricting bond stretching, bending, and torsional motions. At a surface density of 30 A2/chain molecule, the probability density of finding effective free volume available to spherical permeants displays a distribution with two exponential components. Both pre-exponential factors, p1 and p2, remain roughly constant in the highly ordered chain region with average values of 0.012 and 0.00039 A-3, respectively, and increase to 0.049 and 0.0067 A-3 at the mid-plane. The first characteristic cavity size V1 is only weakly dependent on position in the bilayer interior with an average value of 3.4 A3, while the second characteristic cavity size V2 varies more dramatically from a plateau value of 12.9 A3 in the highly ordered chain region to 9.0 A3 in the center of the bilayer. The mean cavity shape is described in terms of a probability distribution for the angle at which the test permeant is in contact with one of and does not overlap with anyone of the chain segments in the bilayer. The results show that (a) free volume is elongated in the highly ordered chain region with its long axis normal to the bilayer interface approaching spherical symmetry in the center of the bilayer and (b) small free volume is more elongated than large free volume. The order and conformational structures relevant to the free-volume distributions are also examined. It is found that both overall and internal motions have comparable contributions to local disorder and couple strongly with each other, and the occurrence of kink defects has higher probability than predicted from an independent-transition model. Images FIGURE 1 PMID:8241390

[Temporal and spatial distribution of the crab Callinectes sapidus (Decapoda: Portunidae) in Chetumal Bay, Quintana Roo, Mexico].

PubMed

Ortiz-León, Héctor J; Jesús-Navarrete, Alberto de; Cordero, Eloy Sosa

2007-03-01

In order to determine temporal and spatial distribution patterns of Callinectes sapidus, samplings were carried out during the cold-front (January-February), dry (May-June) and rainy (August-September, 2002) climatic seasons, in 30 sampling stations of Chetumal Bay, grouped in sectors A (14 stations), B (eight stations) and C (eight stations). In each sampling station crabs were collected from two transects parallel to the coast, each with three traps, separated by 30 m. Sediments were calcareous coarse and medium sand, white or lightly gray. A total of 1 031 specimens were collected. CPEU (Capture Per Effort Unit) differed spatially and temporally. Highest CPEU was found in sector C with 1.3 ind.trap(-1), and in the rainy season with 1.1 ind.trap(-1). Population was predominantly composed of male individuals. The male:female ratio was 15:1. Males and adults (group II) CPEU was significant different between sectors and climatic seasons. Both males and adults (group II) had a greater CPEU in sector C (1.2 ind.trap-) and in the rainy season (1.1 ind.trap(-1)). Abundance of female and juvenile individuals (group I) was low during the sampling period whereas group 0 juvenile individuals were not found. A greater relative frequency between sectors and climatic seasons were observed in 130-139 mm and 140-149 mm size interval (CW). C. sapidus occurred on sandy sediments in Chetumal Bay. Pearson product moment correlations exhibited significant relationships between CPEU and temperature, salinity and dissolved oxygen. In Chetumal Bay, the spatial and temporal distribution of C. sapidus can be related to salinity, temperature, habitat quality, food availability, recruitment and reproduction events of individuals.

Lightness, chroma, and hue distributions in natural teeth measured by a spectrophotometer.

PubMed

Pustina-Krasniqi, Teuta; Shala, Kujtim; Staka, Gloria; Bicaj, Teuta; Ahmedi, Enis; Dula, Linda

2017-01-01

The aim of the study was to analyze the distribution of color parameters, lightness (L*), chroma (C), hue (H), a* and b*, in the intercanine sector in maxilla. Patients' tooth color measurements were performed using an intraoral spectrophotometer VITA Easyshade ® (VITA Zahnfabrik H. Rauter GmbH and Co. KG, Bad Sackingen, Germany). The measurements were made in 255 subjects in the intercanine sector in maxilla. The mean values for the group of 255 subjects were as follows: L*, a*, b*, C, and H as 81.6, 0.67, 21.6, 21.7, and 92.7, respectively. For F=206.27 and P < 0.001 between L*, a*, b*, C, H, and central incisor/lateral incisor/canines, there were statistically significant differences. With the statistical analysis, it was determined that there are significant color differences between the teeth of the intercanine sector, which differences are clinically significant also.

Building green supply chains in eco-industrial parks towards a green economy: Barriers and strategies.

PubMed

Li, Jacqueline; Pan, Shu-Yuan; Kim, Hyunook; Linn, Jean H; Chiang, Pen-Chi

2015-10-01

As suggested by UNEP, the key to sustainable development is to create a "green economy" which should encapsulate all three sectors: the industry, the people, and the government. Therefore, there is an urgent need to develop and implement the green technologies into the existing facilities, especially in the developing countries. In this study, the role of green supply chains in eco-industrial parks (EIPs) towards a green economy was investigated. The strategies and effective evaluation procedures of the green economy were proposed by assessing the barriers from the perspective of institution, regulation, technology, and finance. In addition, three case studies from iron and steel-making, paper mill and pulping, and petrochemical industries were presented and illustrated for building the green supply chains. For example, in the case of Lin-Hai Industrial Park, a total of 15 efficient green supply chains using waste-to-resources technologies were established by 2012, resulting in an economic benefit of USD 100 million per year. It suggests that the green supply chains should be established to achieve both economic growth and environmental protection. With these successful experiences, building a green supply chain within industrial park should be extensively promoted to make traditional industries around the world being environmentally bearable, economic viable, and social equitable. Copyright © 2015 Elsevier Ltd. All rights reserved.

Coastal zone color scanner pigment concentrations in the southern ocean and relationships to geophysical surface features

NASA Technical Reports Server (NTRS)

Comiso, J. C.; Mcclain, C. R.; Sullivan, C. W.; Ryan, J. P.; Leonard, C. L.

1993-01-01

Climatological data on the distribution of surface pigment fields in the entire southern ocean over a seasonal cycle are examined. The occurrence of intense phytoplankton blooms during austral summer months and during other seasons in different regions is identified and analyzed. The highest pigment concentrations are observed at high latitudes and over regions with water depths usually less than 600 m. Basin-scale pigment distribution shows a slightly asymmetric pattern of enhanced pigment concentrations about Antarctica, with enhanced concentrations extending to lower latitudes in the Atlantic and Indian sectors than in the Pacific sector. A general increase in pigment concentrations is evident from the low latitudes toward the Antarctic circumpolar region. Spatial relationships between pigment and archived geophysical data reveal significant correlation between pigment distributions and both bathymetry and wind stress, while general hemispheric scale patterns of pigment distributions are most coherent with the geostrophic flow of the Antarctic Circumpolar Current.

Solar thermal power systems point-focusing thermal and electric applications projects. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Marriott, A.

1980-01-01

The activities of the Point-Focusing Thermal and Electric Applications (PETEA) project for the fiscal year 1979 are summarized. The main thrust of the PFTEA Project, the small community solar thermal power experiment, was completed. Concept definition studies included a small central receiver approach, a point-focusing distributed receiver system with central power generation, and a point-focusing distributed receiver concept with distributed power generation. The first experiment in the Isolated Application Series was initiated. Planning for the third engineering experiment series, which addresses the industrial market sector, was also initiated. In addition to the experiment-related activities, several contracts to industry were let and studies were conducted to explore the market potential for point-focusing distributed receiver (PFDR) systems. System analysis studies were completed that looked at PFDR technology relative to other small power system technology candidates for the utility market sector.

Evaluating opportunities to improve material and energy impacts in commodity supply chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanes, Rebecca J.; Carpenter, Alberta

When evaluated at the scale of individual processes, next-generation technologies may be more energy and emissions intensive than current technology. Furthermore, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Materials Flow through Industry (MFI) supply chain modeling tool. The MFI tool is a cradle-to-gate linear network model of the US industrial sector that can model a wide range of manufacturing scenarios,more » including changes in production technology and increases in industrial energy efficiency. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing three lightweight vehicle supply chains to the supply chain of a conventional, standard weight vehicle. Several of the lightweight vehicle supply chains are evaluated under manufacturing scenarios that include next-generation production technologies and next-generation materials. Results indicate that producing lightweight vehicles is more energy and emission intensive than producing the non-lightweight vehicle, but the fuel saved during vehicle use offsets this increase. In this case study, greater reductions in supply chain energy and emissions were achieved through the application of the next-generation technologies than from application of energy efficiency increases.« less

Evaluating opportunities to improve material and energy impacts in commodity supply chains

DOE PAGES

Hanes, Rebecca J.; Carpenter, Alberta

2017-01-10

When evaluated at the scale of individual processes, next-generation technologies may be more energy and emissions intensive than current technology. Furthermore, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Materials Flow through Industry (MFI) supply chain modeling tool. The MFI tool is a cradle-to-gate linear network model of the US industrial sector that can model a wide range of manufacturing scenarios,more » including changes in production technology and increases in industrial energy efficiency. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing three lightweight vehicle supply chains to the supply chain of a conventional, standard weight vehicle. Several of the lightweight vehicle supply chains are evaluated under manufacturing scenarios that include next-generation production technologies and next-generation materials. Results indicate that producing lightweight vehicles is more energy and emission intensive than producing the non-lightweight vehicle, but the fuel saved during vehicle use offsets this increase. In this case study, greater reductions in supply chain energy and emissions were achieved through the application of the next-generation technologies than from application of energy efficiency increases.« less

The Impact of Organizational Justice on Career Satisfaction of Employees in the Public Sector of South Korea

ERIC Educational Resources Information Center

Oh, Jeong Rok

2013-01-01

The purpose of this study was to explore the relationship between organizational justice and career satisfaction of employees in the public sector of South Korea. Specifically, this study aimed to investigate the impact of three different dimensions (distributive, procedural, and interactional justice) of organizational justice on career…

Broadcasting in an On-Demand World Creating Community Radio in the Era of Podcasting and Webcasting

ERIC Educational Resources Information Center

O'Baoill, Andrew

2009-01-01

This project examines the impact that internet-based distribution technologies, in particular webcasting and podcasting, are having on the community radio sector in the United States. Through interviews with sector participants, the impact of this changing technological environment on the role of community radio is identified. Internet-based…

Compensation Rules for Climate Policy in the Electricity Sector

ERIC Educational Resources Information Center

Burtraw, Dallas; Palmer, Karen

2008-01-01

Most previous cap and trade programs have distributed emission allowances for free to incumbent producers. However, in the electricity sector the value of CO[subscript 2] allowances may be far in excess of costs to industry and giving them away to firms diverts allowance value from other purposes. Using a detailed simulation model, this paper…

The New Political Economy of Higher Education: Between Distributional Conflicts and Discursive Stratification

ERIC Educational Resources Information Center

Schulze-Cleven, Tobias; Reitz, Tilman; Maesse, Jens; Angermuller, Johannes

2017-01-01

The higher education sector has been undergoing a far-reaching institutional re-orientation during the past two decades. Many adjustments appear to have strengthened the role of competition in the governance of higher education, but the character of the sector's emerging new political economy has frequently remained unclear. Serving as the…

The public sector nursing workforce in Kenya: a county-level analysis

PubMed Central

2014-01-01

Background Kenya’s human resources for health shortage is well documented, yet in line with the new constitution, responsibility for health service delivery will be devolved to 47 new county administrations. This work describes the public sector nursing workforce likely to be inherited by the counties, and examines the relationships between nursing workforce density and key indicators. Methods National nursing deployment data linked to nursing supply data were used and analyzed using statistical and geographical analysis software. Data on nurses deployed in national referral hospitals and on nurses deployed in non-public sector facilities were excluded from main analyses. The densities and characteristics of the public sector nurses across the counties were obtained and examined against an index of county remoteness, and the nursing densities were correlated with five key indicators. Results Of the 16,371 nurses in the public non-tertiary sector, 76% are women and 53% are registered nurses, with 35% of the nurses aged 40 to 49 years. The nursing densities across counties range from 1.2 to 0.08 per 1,000 population. There are statistically significant associations of the nursing densities with a measure of health spending per capita (P value = 0.0028) and immunization rates (P value = 0.0018). A higher county remoteness index is associated with explaining lower female to male ratio of public sector nurses across counties (P value <0.0001). Conclusions An overall shortage of nurses (range of 1.2 to 0.08 per 1,000) in the public sector countrywide is complicated by mal-distribution and varying workforce characteristics (for example, age profile) across counties. All stakeholders should support improvements in human resources information systems and help address personnel shortages and mal-distribution if equitable, quality health-care delivery in the counties is to be achieved. PMID:24467776

The public sector nursing workforce in Kenya: a county-level analysis.

PubMed

Wakaba, Mabel; Mbindyo, Patrick; Ochieng, Jacob; Kiriinya, Rose; Todd, Jim; Waudo, Agnes; Noor, Abdisalan; Rakuom, Chris; Rogers, Martha; English, Mike

2014-01-27

Kenya's human resources for health shortage is well documented, yet in line with the new constitution, responsibility for health service delivery will be devolved to 47 new county administrations. This work describes the public sector nursing workforce likely to be inherited by the counties, and examines the relationships between nursing workforce density and key indicators. National nursing deployment data linked to nursing supply data were used and analyzed using statistical and geographical analysis software. Data on nurses deployed in national referral hospitals and on nurses deployed in non-public sector facilities were excluded from main analyses. The densities and characteristics of the public sector nurses across the counties were obtained and examined against an index of county remoteness, and the nursing densities were correlated with five key indicators. Of the 16,371 nurses in the public non-tertiary sector, 76% are women and 53% are registered nurses, with 35% of the nurses aged 40 to 49 years. The nursing densities across counties range from 1.2 to 0.08 per 1,000 population. There are statistically significant associations of the nursing densities with a measure of health spending per capita (P value = 0.0028) and immunization rates (P value = 0.0018). A higher county remoteness index is associated with explaining lower female to male ratio of public sector nurses across counties (P value <0.0001). An overall shortage of nurses (range of 1.2 to 0.08 per 1,000) in the public sector countrywide is complicated by mal-distribution and varying workforce characteristics (for example, age profile) across counties. All stakeholders should support improvements in human resources information systems and help address personnel shortages and mal-distribution if equitable, quality health-care delivery in the counties is to be achieved.

High energy collisions on tandem time-of-flight mass spectrometers†

PubMed Central

Cotter, Robert J.

2013-01-01

Long before the introduction of matrix-assisted laser desorption (MALDI), electrospray ionization (ESI), Orbitraps and any of the other tools that are now used ubiquitously for proteomics and metabolomics, the highest performance mass spectrometers were sector instruments, providing high resolution mass measurements by combining an electrostatic energy analyzer (E) with a high field magnet (B). In its heyday, the four sector mass spectrometer (or EBEB) was the crown jewel, providing the highest performance tandem mass spectrometry using single, high energy collisions to induce fragmentation. During a time in which quadrupole and tandem triple quadrupole instruments were also enjoying increased usage and popularity, there were nonetheless some clear advantages for sectors over their low collision energy counterparts. Time-of-flight mass spectrometers are high voltage, high vacuum instruments that have much in common with sectors and have inspired the development of tandem instruments exploiting single high energy collisions. In this retrospective we recount our own journey to produce high performance time-of-flights and tandems, describing the basic theory, problems and the advantages for such instruments. An experiment testing impulse collision theory (ICT) underscores the similarities with sector mass spectrometers where this concept was first developed. Applications provide examples of more extensive fragmentation, side chain cleavages and charge-remote fragmentation, also characteristic of high energy sector mass spectrometers. Moreover, the so-called curved-field reflectron has enabled the design of instruments that are simpler, collect and focus all of the ions, and may provide the future technology for the clinic, for tissue imaging and the characterization of microorganisms. PMID:23519928

CHANGES IN FERRITIN H- AND L-CHAINS IN CANINE LENSES WITH AGE-RELATED NUCLEAR CATARACT

PubMed Central

Goralska, Małgorzata; Nagar, Steven; Colitz, Carmen M.H.; Fleisher, Lloyd N.; McGahan, M. Christine

2014-01-01

PURPOSE To determine potential differences in the characteristics of the iron storage protein, ferritin and its heavy (H) and light (L) subunits in fiber cells from cataractous and normal lenses of older dogs. METHODS Lens fiber cell homogenates were analyzed by SDS-PAGE and ferritin chains were immunodetected with ferritin chain-specific antibodies. Ferritin concentration was measured by ELISA. Immunohistochemistry was used to localize ferritin chains in lens sections. RESULTS The concentration of assembled ferritin was comparable in normal and cataractous lenses of similarly aged dogs. The ferritin L-chain detected in both lens types was modified and was about 11 kDa larger (30 kDa) than standard L-chain (19 kDa) purified from canine liver. The H-chain identified in cataractous fiber cells (29 kDa) differed from 21 kDa standard canine H-chain and from 12 kDa modified H-chain present in fiber cells of normal lenses. Histologic analysis revealed that the H-chain was distributed differently throughout cataractous lenses when compared to normal lenses. There was also a difference in subunit makeup of assembled ferritin between the two lens types. Ferritin from cataractous lenses contained more H-chain and bound 11-fold more iron than ferritin from normal lenses. CONCLUSIONS There are significant differences in the characteristics of ferritin H-chain and its distribution in canine cataractous lenses as compared to normal lenses. The higher content of H-chain in assembled ferritin allows this molecule to sequester more iron. In addition the accumulation of H-chain in deeper fiber layers of the lens may be part of a defense mechanism by which the cataractous lens limits iron-catalyzed oxidative damage. PMID:18708625

Incorporating Multifaceted Mental Health Prevention Services in Community Sectors-of-Care

PubMed Central

Gewirtz, Abigail H.; August, Gerald J.

2017-01-01

This article proposes a framework for embedding prevention services into community sectors-of-care. Community sectors-of-care include both formal and grassroots organizations distributed throughout a community that provide various resources and services to at-risk children and their families. Though the child population served by these organizations is often at elevated risk for mental health problems by virtue of children's exposure to difficult life circumstances (poverty, maltreatment, homelessness, domestic violence, etc) these children face many barriers to accessing evidence-based prevention or treatment services. We review evidence and propose a framework for integrating prevention services into community sectors-of-care that serve high-risk children and families. PMID:18196457

Optimizing decentralized production-distribution planning problem in a multi-period supply chain network under uncertainty

NASA Astrophysics Data System (ADS)

Nourifar, Raheleh; Mahdavi, Iraj; Mahdavi-Amiri, Nezam; Paydar, Mohammad Mahdi

2017-09-01

Decentralized supply chain management is found to be significantly relevant in today's competitive markets. Production and distribution planning is posed as an important optimization problem in supply chain networks. Here, we propose a multi-period decentralized supply chain network model with uncertainty. The imprecision related to uncertain parameters like demand and price of the final product is appropriated with stochastic and fuzzy numbers. We provide mathematical formulation of the problem as a bi-level mixed integer linear programming model. Due to problem's convolution, a structure to solve is developed that incorporates a novel heuristic algorithm based on Kth-best algorithm, fuzzy approach and chance constraint approach. Ultimately, a numerical example is constructed and worked through to demonstrate applicability of the optimization model. A sensitivity analysis is also made.

[Topic identification for cross-sectoral quality assurance in stroke and TIA treatment].

PubMed

Meyer, Sven; Willms, Gerald; Broge, Björn; Szecsenyi, Joachim

2016-10-01

The development of cross-sectoral quality assurance programs usually requires extensive topic identification. Illustrated by the complex processes of care for stroke and transient ischemic attacks (TIAs), a method for comprehensive topic identification is presented. The first step involves a thorough literature search in terms of systematic reviews, health technology assessments, guidelines, studies into healthcare delivery and the use of specific instruments. Routine data as well as epidemiologic studies are used to analyze the reality of service provision. In addition, experts are consulted to gain expertise concerning deficits of care, approaches to quality assurance and experience with existing quality assurance programs. Furthermore individual patient experiences are collected to add the patients' perceptions of care. Because of the limitation on the regulatory scope of Book V of the German Social Code, which, in this case, was necessary, another source of information was the legal framework and its impact on rescue chain, acute treatment and rehabilitation. Existent quality management systems, accreditations and quality assurance programs in prevention, acute treatment and rehabilitation have been searched in order to avoid any overlap with existing measures. After identifying a total of 71 quality targets according to deficits of care, recommendations for care and expert opinions in primary and secondary prevention, rescue chain, acute treatment, rehabilitation and supply of assistive equipment and therapies, respectively, the usability of instruments was tested. These instruments included case documentation, patient surveys and routine data. 14 quality targets proved to be reproducible by these instruments and were included in the recommendations for a cross-sectoral quality assurance program for stroke and TIA. Copyright © 2016. Published by Elsevier GmbH.

Effects of Acids, Bases, and Heteroatoms on Proximal Radial Distribution Functions for Proteins.

PubMed

Nguyen, Bao Linh; Pettitt, B Montgomery

2015-04-14

The proximal distribution of water around proteins is a convenient method of quantifying solvation. We consider the effect of charged and sulfur-containing amino acid side-chain atoms on the proximal radial distribution function (pRDF) of water molecules around proteins using side-chain analogs. The pRDF represents the relative probability of finding any solvent molecule at a distance from the closest or surface perpendicular protein atom. We consider the near-neighbor distribution. Previously, pRDFs were shown to be universal descriptors of the water molecules around C, N, and O atom types across hundreds of globular proteins. Using averaged pRDFs, a solvent density around any globular protein can be reconstructed with controllable relative error. Solvent reconstruction using the additional information from charged amino acid side-chain atom types from both small models and protein averages reveals the effects of surface charge distribution on solvent density and improves the reconstruction errors relative to simulation. Solvent density reconstructions from the small-molecule models are as effective and less computationally demanding than reconstructions from full macromolecular models in reproducing preferred hydration sites and solvent density fluctuations.

Partnering for Learnware: Critical Success Factors in the Use of Learnware by Human Resources Sector Councils and Industry Associations in Canada = Partenariats pour les technologies d'apprentissage: Facteurs critiques de succes dans l'utilisation des technologies d'apprentissage par les conseils sectoriels des ressources humaines et les associations industrielles au Canada.

ERIC Educational Resources Information Center

Stahmer, Anna; Green, Lyndsay

The use of learnware by human resources sector councils and industry associations in Canada was examined to identify critical success factors in the use of technology-based training. Eight case studies--four involving sector councils and four involving industry associations that either have national mandates or distribute their products across…

Geodesic Monte Carlo on Embedded Manifolds

PubMed Central

Byrne, Simon; Girolami, Mark

2013-01-01

Markov chain Monte Carlo methods explicitly defined on the manifold of probability distributions have recently been established. These methods are constructed from diffusions across the manifold and the solution of the equations describing geodesic flows in the Hamilton–Jacobi representation. This paper takes the differential geometric basis of Markov chain Monte Carlo further by considering methods to simulate from probability distributions that themselves are defined on a manifold, with common examples being classes of distributions describing directional statistics. Proposal mechanisms are developed based on the geodesic flows over the manifolds of support for the distributions, and illustrative examples are provided for the hypersphere and Stiefel manifold of orthonormal matrices. PMID:25309024

Identifying the Barriers and Opportunities for Enhanced Coherence between Agriculture and Public Health Policies: Improving the Fat Supply in India.

PubMed

Downs, Shauna M; Thow, Anne Marie; Ghosh-Jerath, Suparna; Leeder, Stephen R

2015-01-01

The national Government of India has published draft regulation proposing a 5% upper limit of trans fat in partially hydrogenated vegetable oils (PHVOs). Global recommendations are to replace PHVOs with unsaturated fat but it is not known whether this will be feasible in India. We systematically identified policy options to address the three major underlying agricultural sector issues that influence reformulation with healthier oils: the low productivity of domestically produced oilseeds leading to a reliance on palm oil imports, supply chain wastage, and the low availability of oils high in unsaturated fats. Strengthening domestic supply chains in India will be necessary to maximize health gains associated with product reformulation.

Making Supply Chains Resilient to Floods Using a Bayesian Network

NASA Astrophysics Data System (ADS)

Haraguchi, M.

2015-12-01

Natural hazards distress the global economy by disrupting the interconnected supply chain networks. Manufacturing companies have created cost-efficient supply chains by reducing inventories, streamlining logistics and limiting the number of suppliers. As a result, today's supply chains are profoundly susceptible to systemic risks. In Thailand, for example, the GDP growth rate declined by 76 % in 2011 due to prolonged flooding. Thailand incurred economic damage including the loss of USD 46.5 billion, approximately 70% of which was caused by major supply chain disruptions in the manufacturing sector. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and Hurricane Sandy in 2012. This study proposes a methodology for modeling supply chain disruptions using a Bayesian network analysis (BNA) to estimate expected values of countermeasures of floods, such as inventory management, supplier management and hard infrastructure management. We first performed a spatio-temporal correlation analysis between floods and extreme precipitation data for the last 100 years at a global scale. Then we used a BNA to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains and market demands. We also included decision variables of countermeasures that would mitigate potential losses caused by supply chain disruptions. Finally, we conducted a cost-benefit analysis by estimating the expected values of these potential countermeasures while conducting a sensitivity analysis. The methodology was applied to supply chain disruptions caused by the 2011 Thailand floods. Our study demonstrates desirable typical data requirements for the analysis, such as anonymized supplier network data (i.e. critical dependencies, vulnerability information of suppliers) and sourcing data(i.e. locations of suppliers, and production rates and volume), and data from previous experiences (i.e. companies' risk mitigation strategy decisions).

Public-private partnerships in the Canadian environment: options for hospital pharmacies.

PubMed

Uddin, Z; Bear, R A

1997-01-01

This brief report explores the direction being pursued by hospitals interested in outsourcing non-core activities within the pharmacy department. Private sector logistics companies are looking to position themselves in the drug product supply chain to facilitate seamless transfers of drug products, ordering information and payments between drug manufacturers and hospitals. Opportunities for implementing consolidated purchasing, unit dosing, just-in-time inventory and electronic commerce systems are discussed.

Sustainability considerations for integrated biorefineries.

PubMed

Azapagic, Adisa

2014-01-01

Integrated biorefineries have the potential to contribute towards sustainable production of transportation fuels, energy, and chemicals. However, because there are currently no commercial biorefining plants in operation, it is not clear how sustainable they really are. This paper sets out to examine key issues associated with biorefining that should be considered carefully along the whole supply chain to ensure sustainable development of the sector. Copyright © 2013 Elsevier Ltd. All rights reserved.

Determining the Water Bootprint of the Army’s Supply Chain

DTIC Science & Technology

2011-05-01

water, flue gas desulfurization ) • Water consumption estimates will be compared with other modeling techniques Utility Energy Methods Army End Users...Sector Gas /Petroleum Refining Retail Less Gas /Retail Trade Food & Beverages/ Food & Drinking Places Concession/Personal Care Services CY10 Retail...this study • Data collected to support initial reporting of Greenhouse Gas (GHG) Inventory (pursuant to EO 13514) can be leveraged to support this

Work, Skills and Training in the Australian Red Meat Processing Sector. A National Vocational Education and Training Research and Evaluation Program Report

ERIC Educational Resources Information Center

Norton, Kent; Rafferty, Mike

2010-01-01

Work practices in the meat-processing industry have changed in recent years. The industry has moved away from workers dressing a whole carcass towards a chain-based system, with each worker performing a single task along a moving production line. The nature of the meat-processing workforce has also changed. It is no longer dominated by seasonal…

Health impact and cost-effectiveness of a private sector bed net distribution: experimental evidence from Zambia.

PubMed

Sedlmayr, Richard; Fink, Günther; Miller, John M; Earle, Duncan; Steketee, Richard W

2013-03-18

Relatively few programmes have attempted to actively engage the private sector in national malaria control efforts. This paper evaluates the health impact of a large-scale distribution of insecticide-treated nets (ITNs) conducted in partnership with a Zambian agribusiness, and its cost-effectiveness from the perspective of the National Malaria Control Programme (NMCP). The study was designed as a cluster-randomized controlled trial. A list of 81,597 cotton farmers was obtained from Dunavant, a contract farming company in Zambia's cotton sector, in December 2010. 39,963 (49%) were randomly selected to obtain one ITN each. Follow-up interviews were conducted with 438 farmers in the treatment and 458 farmers in the control group in June and July 2011. Treatment and control households were compared with respect to bed net ownership, bed net usage, self-reported fever, and self-reported confirmed malaria. Cost data was collected throughout the programme. The distribution effectively reached target beneficiaries, with approximately 95% of households in the treatment group reporting that they had received an ITN through the programme. The average increase in the fraction of household members sleeping under an ITN the night prior to the interview was 14.6 percentage points (p-value <0.001). Treatment was associated with a 42 percent reduction in the odds of self-reported fever (p-value <0.001) and with a 49 percent reduction in the odds of self-reported malaria (p-value 0.002). This was accomplished at a cost of approximately five US$ per ITN to Zambia's NMCP. The results illustrate that existing private sector networks can efficiently control malaria in remote rural regions. The intra-household allocation of ITNs distributed through this channel was comparable to that of ITNs received from other sources, and the health impact remained substantial.

High-Resolution Water Footprints of Production of the United States

NASA Astrophysics Data System (ADS)

Marston, Landon; Ao, Yufei; Konar, Megan; Mekonnen, Mesfin M.; Hoekstra, Arjen Y.

2018-03-01

The United States is the largest producer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, spatially detailed database of water use by sector would provide insight into U.S. utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the United States. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the U.S. economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking. In fact, we find that 94% of U.S. industries could reduce their total water footprint more by sourcing from more water-efficient suppliers in their supply chain than they could by converting their own operations to be more water-efficient.

Companies' contribution to sustainability through global supply chains.

PubMed

Thorlakson, Tannis; de Zegher, Joann F; Lambin, Eric F

2018-02-27

Global supply chains play a critical role in many of the most pressing environmental stresses and social struggles identified by the United Nations' Sustainable Development Goals (SDGs). Responding to calls from the global community, companies are adopting a variety of voluntary practices to improve the environmental and/or social management of their suppliers' activities. We develop a global survey of 449 publicly listed companies in the food, textile, and wood-products sectors with annual reports in English to provide insight into how the private sector contributes to advancing the SDGs via such sustainable-sourcing practices. We find that while 52% of companies use at least one sustainable-sourcing practice, these practices are limited in scope; 71% relates to only one or a few input materials and 60.5% apply to only first-tier suppliers. We also find that sustainable-sourcing practices typically address a small subset of the sustainability challenges laid out by the SDGs, primarily focusing on labor rights and compliance with national laws. Consistent with existing hypotheses, companies that face consumer and civil society pressure are associated with a significantly higher probability of adopting sustainable-sourcing practices. Our findings highlight the opportunities and limitations of corporate sustainable-sourcing practices in addressing the myriad sustainability challenges facing our world today. Copyright © 2018 the Author(s). Published by PNAS.

How PEPFAR's public-private partnerships achieved ambitious goals, from improving labs to strengthening supply chains.

PubMed

Sturchio, Jeffrey L; Cohen, Gary M

2012-07-01

The President's Emergency Plan for AIDS Relief (PEPFAR), established in 2003, is widely recognized as one of the most ambitious and successful bilateral programs ever implemented to address a single disease. Part of the program's success is attributable to the participation of the private sector, working in partnership with the US and local governments and implementing organizations to maximize the reach and effectiveness of every dollar spent. We examined key public-private partnerships that grew out of PEPFAR to identify features that have made them effective. For example, PEPFAR's Supply Chain Management System took advantage of private industry's best practices in logistics, and a partnership with the medical technology company BD (Becton, Dickinson and Company) improved laboratory systems throughout sub-Saharan Africa. We found that setting ambitious goals, enlisting both global and local partners, cultivating a culture of collaboration, careful planning, continuous monitoring and evaluation, and measuring outcomes systematically led to the most effective programs. The Office of the US Global AIDS Coordinator and PEPFAR should continue to strengthen their capacity for private-sector partnerships, learning from a decade of experience and identifying new ways to make smart investments that will make the most efficient use of taxpayer resources, expand proven interventions more rapidly, and help ensure the sustainability of key programs.

Companies’ contribution to sustainability through global supply chains

PubMed Central

Thorlakson, Tannis; de Zegher, Joann F.; Lambin, Eric F.

2018-01-01

Global supply chains play a critical role in many of the most pressing environmental stresses and social struggles identified by the United Nations’ Sustainable Development Goals (SDGs). Responding to calls from the global community, companies are adopting a variety of voluntary practices to improve the environmental and/or social management of their suppliers’ activities. We develop a global survey of 449 publicly listed companies in the food, textile, and wood-products sectors with annual reports in English to provide insight into how the private sector contributes to advancing the SDGs via such sustainable-sourcing practices. We find that while 52% of companies use at least one sustainable-sourcing practice, these practices are limited in scope; 71% relates to only one or a few input materials and 60.5% apply to only first-tier suppliers. We also find that sustainable-sourcing practices typically address a small subset of the sustainability challenges laid out by the SDGs, primarily focusing on labor rights and compliance with national laws. Consistent with existing hypotheses, companies that face consumer and civil society pressure are associated with a significantly higher probability of adopting sustainable-sourcing practices. Our findings highlight the opportunities and limitations of corporate sustainable-sourcing practices in addressing the myriad sustainability challenges facing our world today. PMID:29440420

Cross-promotional alcohol discounting in Australia's grocery sector: a barrier to initiatives to curb excessive alcohol consumption?

PubMed

Wardle, Jonathan L; Chang, Sungwon

2015-04-01

Excessive alcohol consumption is an increasing issue internationally. Pricing strategies, including discount restrictions, have been identified as one of the most effective policy means by which to reduce heavy alcohol consumption. In Australia, cross-promotional alcohol discounts are increasingly used by supermarket chains as a marketing tool. The purpose of the present study is to provide preliminary data on the nature and extent of cross-promotional alcohol discounting in the Australian grocery sector. A purposive sample of 34 supermarkets in Australia's three largest cities was selected and minor grocery purchases made to uncover the prevalence and level of cross-promotional alcohol discounting. Cross-promotional 'bundled' discounts were very common with 33 of the 34 supermarkets offering a 'two for one' discount on bottles of wine. Even with minor purchases (mean purchase $1.35), the mean value of discounts received was substantial ($16.23). These results appear to be consistent with claims that major supermarket chains are using alcohol discounts as loss leaders to entice new consumers. These strategies are antithetical to public health strategies aimed at reducing excessive alcohol consumption. Further examination of the impact of major retailers on public health initiatives is warranted, particularly in light of increasing retailer concentration. © 2014 Public Health Association of Australia.

Effect of Climate Change on Mediterranean Winter Ranges of Two Migratory Passerines.

PubMed

Tellería, José L; Fernández-López, Javier; Fandos, Guillermo

2016-01-01

We studied the effect of climate change on the distribution of two insectivorous passerines (the meadow pipit Anthus pratensis and the chiffchaff Phylloscopus collybita) in wintering grounds of the Western Mediterranean basin. In this region, precipitation and temperature can affect the distribution of these birds through direct (thermoregulation costs) or indirect effects (primary productivity). Thus, it can be postulated that projected climate changes in the region will affect the extent and suitability of their wintering grounds. We studied pipit and chiffchaff abundance in several hundred localities along a belt crossing Spain and Morocco and assessed the effects of climate and other geographical and habitat predictors on bird distribution. Multivariate analyses reported a positive effect of temperature on the present distribution of the two species, with an additional effect of precipitation on the meadow pipit. These climate variables were used with Maxent to model the occurrence probabilities of species using ring recoveries as presence data. Abundance and occupancy of the two species in the study localities adjusted to the distribution models, with more birds in sectors of high climate suitability. After validation, these models were used to forecast the distribution of climate suitability according to climate projections for 2050-2070 (temperature increase and precipitation reduction). Results show an expansion of climatically suitable sectors into the highlands by the effect of warming on the two species, and a retreat of the meadow pipit from southern sectors related to rain reduction. The predicted patterns show a mean increase in climate suitability for the two species due to the warming of the large highland expanses typical of the western Mediterranean.

7 CFR 4284.960 - Monitoring and reporting program performance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... advantages or disadvantages of supply chain arrangements or equitable distribution of rewards and responsibilities for mid-tier value chain projects; and (v) Recommendations from Beginning Farmers or Socially...

7 CFR 4284.960 - Monitoring and reporting program performance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... advantages or disadvantages of supply chain arrangements or equitable distribution of rewards and responsibilities for mid-tier value chain projects; and (v) Recommendations from Beginning Farmers or Socially...

7 CFR 4284.960 - Monitoring and reporting program performance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... advantages or disadvantages of supply chain arrangements or equitable distribution of rewards and responsibilities for mid-tier value chain projects; and (v) Recommendations from Beginning Farmers or Socially...

Flexibility evaluation of multiechelon supply chains.

PubMed

Almeida, João Flávio de Freitas; Conceição, Samuel Vieira; Pinto, Luiz Ricardo; de Camargo, Ricardo Saraiva; Júnior, Gilberto de Miranda

2018-01-01

Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

Flexibility evaluation of multiechelon supply chains

PubMed Central

Conceição, Samuel Vieira; Pinto, Luiz Ricardo; de Camargo, Ricardo Saraiva; Júnior, Gilberto de Miranda

2018-01-01

Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution. PMID:29584755

Modeling and Implementation of Cattle/Beef Supply Chain Traceability Using a Distributed RFID-Based Framework in China.

PubMed

Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei

2015-01-01

In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain.

Modeling and Implementation of Cattle/Beef Supply Chain Traceability Using a Distributed RFID-Based Framework in China

PubMed Central

Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei

2015-01-01

In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain. PMID:26431340

Intervessel connectivity and relationship with patterns of lateral water exchange within and between xylem sectors in seven xeric shrubs from the great Sahara desert.

PubMed

Halis, Youcef; Mayouf, Rabah; Benhaddya, Mohamed Lamine; Belhamra, Mohamed

2013-03-01

The main objective of this study was to evaluate the role of intervessel contacts in determining the patterns of hydraulic integration both within and between xylem sectors. The degree of intervessel contacts and the lateral exchange capability within and between sectors were examined and correlated in different xeric shrubs. A dye injection method was used to detect the connections between vessels; an apoplastic dye was sucked through a known number of vessels and its distribution in the xylem network was followed. Hydraulic techniques were used to measure axial and tangential conductivity both within and between xylem sectors. The intra- and inter-sector integration indexes were then determined as the ratio of tangential to axial conductance. Species differed significantly in the degree of intervessel contacts, intra- and inter-sector integration index. In all cases, hydraulic integration was observed to be higher within sector than between sectors. From the correlation analyses, the intervessel contacts showed a very weak relationship with inter-sector integration index and a strong positive relationship with intra-sector integration index. Results suggested that (1) the factors affecting patterns of lateral flow within xylem sectors might be relatively different from those between sectors. (2) The degree of intervessel contacts was a major determinant of hydraulic integration within the same xylem sector. (3) Intervessel connectivity alone was a poor predictor of hydraulic integration between different sectors, implying a significant contribution of other anatomical, physiological and environmental factors in determining the patterns of integrated-sectored transport within woody stems.

Inference of R 0 and Transmission Heterogeneity from the Size Distribution of Stuttering Chains

PubMed Central

Blumberg, Seth; Lloyd-Smith, James O.

2013-01-01

For many infectious disease processes such as emerging zoonoses and vaccine-preventable diseases, and infections occur as self-limited stuttering transmission chains. A mechanistic understanding of transmission is essential for characterizing the risk of emerging diseases and monitoring spatio-temporal dynamics. Thus methods for inferring and the degree of heterogeneity in transmission from stuttering chain data have important applications in disease surveillance and management. Previous researchers have used chain size distributions to infer , but estimation of the degree of individual-level variation in infectiousness (as quantified by the dispersion parameter, ) has typically required contact tracing data. Utilizing branching process theory along with a negative binomial offspring distribution, we demonstrate how maximum likelihood estimation can be applied to chain size data to infer both and the dispersion parameter that characterizes heterogeneity. While the maximum likelihood value for is a simple function of the average chain size, the associated confidence intervals are dependent on the inferred degree of transmission heterogeneity. As demonstrated for monkeypox data from the Democratic Republic of Congo, this impacts when a statistically significant change in is detectable. In addition, by allowing for superspreading events, inference of shifts the threshold above which a transmission chain should be considered anomalously large for a given value of (thus reducing the probability of false alarms about pathogen adaptation). Our analysis of monkeypox also clarifies the various ways that imperfect observation can impact inference of transmission parameters, and highlights the need to quantitatively evaluate whether observation is likely to significantly bias results. PMID:23658504

Private sector contribution to childhood immunization: Sri Lankan experience.

PubMed

Agampodi, S B; Amarasinghe, D A C L

2007-04-01

The main service provider for childhood immunization in Sri Lanka is the government sector. However, utilization of private sector for childhood immunization is increasing rapidly. Existing national immunization data does not routinely include statistics on private sector immunization delivery adequately. To estimate the proportion of children immunized in the private sector; describe socio-demographic characteristics of private sector users and compare these with government sector users. A community-based crosssectional descriptive study was conducted using a pre-tested interviewer-administered structured questionnaire. This was done in the Colombo municipal council area using the WHO 30 cluster methodology. The total number of households in the sample was 553. Out of the 5,028 total immunizations reported in the present study, around one-third (2,544) was obtained through the private sector. Nineteen percent (104) of children were exclusively immunized from the private sector. The distribution of usual immunization provider was - government sector 72.3% (400) and private sector 27.7% (153). Significant differences were observed (P < 0.001) between private and government sector users with regard to family income, social class, ethnicity, religion and educational level of the mother. The age-appropriate immunization among the 12- to 23-month age group was 92.3% (144) in the government sector, whereas it was 95% (38) in the private sector. Among the 24- to 35-month age group, it was 91.7% (121) and 92.7% (76) respectively. The age-adjusted immunization coverage rates were almost same among the government and private sector users except for the measles vaccine, where the private sector users had significantly (P = 0.016) higher coverage. Utilization of private sector immunization services is high in the Colombo municipal council area.

Droplet localization in the random XXZ model and its manifestations

NASA Astrophysics Data System (ADS)

Elgart, A.; Klein, A.; Stolz, G.

2018-01-01

We examine many-body localization properties for the eigenstates that lie in the droplet sector of the random-field spin- \\frac 1 2 XXZ chain. These states satisfy a basic single cluster localization property (SCLP), derived in Elgart et al (2018 J. Funct. Anal. (in press)). This leads to many consequences, including dynamical exponential clustering, non-spreading of information under the time evolution, and a zero velocity Lieb-Robinson bound. Since SCLP is only applicable to the droplet sector, our definitions and proofs do not rely on knowledge of the spectral and dynamical characteristics of the model outside this regime. Rather, to allow for a possible mobility transition, we adapt the notion of restricting the Hamiltonian to an energy window from the single particle setting to the many body context.

Vegetable Fibers for Composite Materials In Constructive Sector

NASA Astrophysics Data System (ADS)

Giglio, Francesca; Savoja, Giulia

2017-08-01

The aim of the research is to study and to test bio-mixture for laminas to use in construction field components. Composite materials are becoming more common in different sectors, but their embodied energy is an environmental problem. For this, in recent years, the researchers investigate new mixtures for composites, in particular with vegetable fibers and bio-based epoxy resin. The research carried out different laboratory tests for material and mechanical characterization, starting from the analysis of vegetable fibers, and arriving to test different kind of laminas with sundry fabrics and bio-based epoxy resin. In the most general organization of the theme, the research has the overall objective to contribute to reduce composites environmental impacts, with the promotion of local production chains about innovative materials from renewable and sustainable sources.

Investigation of the Practices, Legislation, Supply Chain, and Regulation of Opioids for Clinical Pain Management in Southern Africa: A Multi-sectoral, Cross-National, Mixed Methods Study.

PubMed

Namisango, Eve; Allsop, Matthew J; Powell, Richard A; Friedrichsdorf, Stefan J; Luyirika, Emmanuel B K; Kiyange, Fatia; Mukooza, Edward; Ntege, Chris; Garanganga, Eunice; Ginindza-Mdluli, Mavis Ntombifuthi; Mwangi-Powell, Faith; Mondlane, Lidia Justino; Harding, Richard

2018-03-01

Sub-Saharan Africa faces an increasing incidence and prevalence of life-limiting and life-threatening conditions. These conditions are associated with a significant burden of pain linked to high morbidity and disability that is poorly assessed and undertreated. Barriers to effective pain management partly relate to lack of access to opioid analgesia and challenges in their administration. To identify country-specific and broader regional barriers to access, as well as the administration of opioids, and generate recommendations for advancing pain management in Southern Africa. A parallel mixed methods design was used across three countries: Mozambique, Swaziland, and Zimbabwe. Three activities were undertaken: 1) a review of regulatory and policy documentation, 2) group interviews, and 3) a self-administered key informant survey. Barriers to accessing opioid analgesics for medical use include overly restrictive controlled medicines' laws; use of stigmatizing language in key documents; inaccurate actual opioid consumption estimation practices; knowledge gaps in the distribution, storage, and prescription of opioids; critical shortage of prescribers; and high out-of-pocket financial expenditures for patients against a backdrop of high levels of poverty. Policies and relevant laws should be updated to ensure that the legislative environment supports opioid access for pain management. Action plans for improving pain treatment for patients suffering from HIV or non-communicable diseases should address barriers at the different levels of the supply chain that involve policymakers, administrators, and service providers. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Sectoral networks and macroeconomic tail risks in an emerging economy.

PubMed

Romero, Pedro P; López, Ricardo; Jiménez, Carlos

2018-01-01

This paper aims to explain the macroeconomic volatility due to microeconomic shocks to one or several sectors, recognizing the non-symmetrical relation in the interaction among the Ecuadorian economic sectors. To grasp the economic structure of this emerging economy, a statistical analysis of network data is applied to the respective input-output matrix of Ecuador from 1975 until 2012. We find periods wherein the production of domestic inputs is concentrated in a few suppliers; for example, in 2010, the concentration significantly affects sectors and their downstream providers, thus influencing aggregate volatility. Compared to the US productive structure, this emerging economy presents fewer sectors and degree distributions with less extreme fat-tail behavior. In this simpler economy, we continue to find a link between microeconomic shocks and aggregate volatility. Two new theoretical propositions are introduced to formalize our results.

Sectoral networks and macroeconomic tail risks in an emerging economy

PubMed Central

López, Ricardo; Jiménez, Carlos

2018-01-01

This paper aims to explain the macroeconomic volatility due to microeconomic shocks to one or several sectors, recognizing the non-symmetrical relation in the interaction among the Ecuadorian economic sectors. To grasp the economic structure of this emerging economy, a statistical analysis of network data is applied to the respective input-output matrix of Ecuador from 1975 until 2012. We find periods wherein the production of domestic inputs is concentrated in a few suppliers; for example, in 2010, the concentration significantly affects sectors and their downstream providers, thus influencing aggregate volatility. Compared to the US productive structure, this emerging economy presents fewer sectors and degree distributions with less extreme fat-tail behavior. In this simpler economy, we continue to find a link between microeconomic shocks and aggregate volatility. Two new theoretical propositions are introduced to formalize our results. PMID:29293567

Hotspots for allosteric regulation on protein surfaces

PubMed Central

Reynolds, Kimberly A.; McLaughlin, Richard N.; Ranganathan, Rama

2012-01-01

Recent work indicates a general architecture for proteins in which sparse networks of physically contiguous and co-evolving amino acids underlie basic aspects of structure and function. These networks, termed sectors, are spatially organized such that active sites are linked to many surface sites distributed throughout the structure. Using the metabolic enzyme dihydrofolate reductase as a model system, we show that (1) the sector is strongly correlated to a network of residues undergoing millisecond conformational fluctuations associated with enzyme catalysis and (2) sector-connected surface sites are statistically preferred locations for the emergence of allosteric control in vivo. Thus, sectors represent an evolutionarily conserved “wiring” mechanism that can enable perturbations at specific surface positions to rapidly initiate conformational control over protein function. These findings suggest that sectors enable the evolution of intermolecular communication and regulation. PMID:22196731

Incorporating location, routing, and inventory decisions in a bi-objective supply chain design problem with risk-pooling

NASA Astrophysics Data System (ADS)

Tavakkoli-Moghaddam, Reza; Forouzanfar, Fateme; Ebrahimnejad, Sadoullah

2013-07-01

This paper considers a single-sourcing network design problem for a three-level supply chain. For the first time, a novel mathematical model is presented considering risk-pooling, the inventory existence at distribution centers (DCs) under demand uncertainty, the existence of several alternatives to transport the product between facilities, and routing of vehicles from distribution centers to customer in a stochastic supply chain system, simultaneously. This problem is formulated as a bi-objective stochastic mixed-integer nonlinear programming model. The aim of this model is to determine the number of located distribution centers, their locations, and capacity levels, and allocating customers to distribution centers and distribution centers to suppliers. It also determines the inventory control decisions on the amount of ordered products and the amount of safety stocks at each opened DC, selecting a type of vehicle for transportation. Moreover, it determines routing decisions, such as determination of vehicles' routes starting from an opened distribution center to serve its allocated customers and returning to that distribution center. All are done in a way that the total system cost and the total transportation time are minimized. The Lingo software is used to solve the presented model. The computational results are illustrated in this paper.

Exploring the Relationship between the Dimensions of Distributed Leadership in Arkansas Community Colleges

ERIC Educational Resources Information Center

Brown, Sara Ellen

2017-01-01

The purpose of this study was to conduct an exploratory factor analysis within the community college sector using the Distributed Leadership Scale. The instrument, which was designed from the original Distributed Leadership Readiness Scale(c) (CSDE, 2004), measured readiness and engagement in shared leadership practices within the community…

Price-based promotions of alcohol: legislative consistencies and inconsistencies across the Australian retail, entertainment and media sectors.

PubMed

Wardle, Jon

2015-05-01

Excessive alcohol consumption is a major public health issue internationally, with alcohol consumption being recognised as a leading cause of preventable illness and major social burden. To help ameliorate the risks and harms associated with alcohol consumption, all levels of governments have explored various legislative and regulatory provisions to support responsible alcohol consumption, service and promotion. In this article, using Australia as a case study, the legislative environment around responsible alcohol promotion and consumption across the Australian retail, entertainment and media sectors will be explored, with a focus on pricing and volume-based discounts. Whilst the potential harm and effect of both the licensed and non-licensed sectors appears to be widely acknowledged as similar in both scope and size of effect, legislative protections overwhelmingly focus solely on reducing the risks associated with alcohol consumption in licensed premises. This article explores the legislative provisions around preventing excessive alcohol consumption through promotional and marketing activities, and notes that whilst the licensed premises sector is facing increasing legislative restrictions, the off-premises sector remains unregulated and in some cases has even had existing restrictions removed, despite forming an increasing part of the alcohol chain in Australia. There appear to be inconsistencies and regulatory gaps in relation to price-based and volume-based discount alcohol promotions. Regulatory loopholes allow the retail sector in particular to use discounted alcohol as a promotional tool, in a way that is inconsistent with the goals of public health alcohol legislation, and in a way which would be illegal in any other sector. There appears to be a compelling case for introducing new restrictions, or extending existing restrictions, on these forms of promotion across all sectors involved in alcohol promotion, and there is considerable evidence that there would be considerable public health benefit from doing so. Copyright © 2015 Elsevier B.V. All rights reserved.

Distribution, morphology, and origins of Martian pit crater chains

NASA Astrophysics Data System (ADS)

Wyrick, Danielle; Ferrill, David A.; Morris, Alan P.; Colton, Shannon L.; Sims, Darrell W.

2004-06-01

Pit craters are circular to elliptical depressions found in alignments (chains), which in many cases coalesce into linear troughs. They are common on the surface of Mars and similar to features observed on Earth and other terrestrial bodies. Pit craters lack an elevated rim, ejecta deposits, or lava flows that are associated with impact craters or calderas. It is generally agreed that the pits are formed by collapse into a subsurface cavity or explosive eruption. Hypotheses regarding the formation of pit crater chains require development of a substantial subsurface void to accommodate collapse of the overlying material. Suggested mechanisms of formation include: collapsed lava tubes, dike swarms, collapsed magma chamber, substrate dissolution (analogous to terrestrial karst), fissuring beneath loose material, and dilational faulting. The research described here is intended to constrain current interpretations of pit crater chain formation by analyzing their distribution and morphology. The western hemisphere of Mars was systematically mapped using Mars Orbiter Camera (MOC) images to generate ArcView™ Geographic Information System (GIS) coverages. All visible pit crater chains were mapped, including their orientations and associations with other structures. We found that pit chains commonly occur in areas that show regional extension or local fissuring. There is a strong correlation between pit chains and fault-bounded grabens. Frequently, there are transitions along strike from (1) visible faulting to (2) faults and pits to (3) pits alone. We performed a detailed quantitative analysis of pit crater morphology using MOC narrow angle images, Thermal Emission Imaging System (THEMIS) visual images, and Mars Orbiter Laser Altimeter (MOLA) data. This allowed us to determine a pattern of pit chain evolution and calculate pit depth, slope, and volume. Volumes of approximately 150 pits from five areas were calculated to determine volume size distribution and regional trends. The information collected in the study was then compared with non-Martian examples of pit chains and physical analog models. We evaluated the various mechanisms for pit chain development based on the data collected and conclude that dilational normal faulting and sub-vertical fissuring provide the simplest and most comprehensive mechanisms to explain the regional associations, detailed geometry, and progression of pit chain development.

Cluster analysis for determining distribution center location

NASA Astrophysics Data System (ADS)

Lestari Widaningrum, Dyah; Andika, Aditya; Murphiyanto, Richard Dimas Julian

2017-12-01

Determination of distribution facilities is highly important to survive in the high level of competition in today’s business world. Companies can operate multiple distribution centers to mitigate supply chain risk. Thus, new problems arise, namely how many and where the facilities should be provided. This study examines a fast-food restaurant brand, which located in the Greater Jakarta. This brand is included in the category of top 5 fast food restaurant chain based on retail sales. There were three stages in this study, compiling spatial data, cluster analysis, and network analysis. Cluster analysis results are used to consider the location of the additional distribution center. Network analysis results show a more efficient process referring to a shorter distance to the distribution process.

Geographical distribution and profile of medical doctors in public sector hospitals of the Limpopo Province, South Africa.

PubMed

Ntuli, Samuel T; Maboya, Edwin

2017-09-27

The shortage and unequal distribution of medical doctors in low- and middle-income countries continues to be a public health concern. To establish the geographical distribution and demographic profile of medical doctors in public sector hospitals of the Limpopo Province, South Africa. The PERSAL system was used to obtain information on the number of medical doctors employed in public sector hospitals of the Limpopo Province. Data were exported from PERSAL's database and then analysed using STATA version 9.0. The mean age of the 887 medical doctors was 40.1 ± 11.2 years (range 24-79 years). Sixty per cent of the doctors were male, 66% were aged ≤ 45 years and 84% were African. Most of the doctors (86%) were medical officers, of which 55% had < 5 years working experience. Overall, the doctor-to-population ratio for the five districts in the province was 16.4/100 000, with Capricorn (33.7/100 000) and Waterberg (20.2/100 000) recording the highest ratios. A large proportion (43%) of medical officers are employed in the Capricorn District, of which 71% were practising at the tertiary hospital. This study demonstrated a shortage and maldistribution of medical doctors in the public sector hospitals of the Limpopo Province. This has a potentially negative effect on the delivery of an appropriate and efficient healthcare service to the population and requires urgent attention.

DEFINED CONTRIBUTION PLANS, DEFINED BENEFIT PLANS, AND THE ACCUMULATION OF RETIREMENT WEALTH

PubMed Central

Poterba, James; Rauh, Joshua; Venti, Steven; Wise, David

2010-01-01

The private pension structure in the United States, once dominated by defined benefit (DB) plans, is currently divided between defined contribution (DC) and DB plans. Wealth accumulation in DC plans depends on the participant's contribution behavior and on financial market returns, while accumulation in DB plans is sensitive to a participant's labor market experience and to plan parameters. This paper simulates the distribution of retirement wealth under representative DB and DC plans. It uses data from the Health and Retirement Study (HRS) to explore how asset returns, earnings histories, and retirement plan characteristics contribute to the variation in retirement wealth outcomes. We simulate DC plan accumulation by randomly assigning individuals a share of wages that they and their employer contribute to the plan. We consider several possible asset allocation strategies, with asset returns drawn from the historical return distribution. Our DB plan simulations draw earnings histories from the HRS, and randomly assign each individual a pension plan drawn from a sample of large private and public defined benefit plans. The simulations yield distributions of both DC and DB wealth at retirement. Average retirement wealth accruals under current DC plans exceed average accruals under private sector DB plans, although DC plans are also more likely to generate very low retirement wealth outcomes. The comparison of current DC plans with more generous public sector DB plans is less definitive, because public sector DB plans are more generous on average than their private sector counterparts. PMID:21057597

The heterogeneity of segmental dynamics of filled EPDM by (1)H transverse relaxation NMR.

PubMed

Moldovan, D; Fechete, R; Demco, D E; Culea, E; Blümich, B; Herrmann, V; Heinz, M

2011-01-01

Residual second moment of dipolar interactions M(2) and correlation time segmental dynamics distributions were measured by Hahn-echo decays in combination with inverse Laplace transform for a series of unfilled and filled EPDM samples as functions of carbon-black N683 filler content. The fillers-polymer chain interactions which dramatically restrict the mobility of bound rubber modify the dynamics of mobile chains. These changes depend on the filler content and can be evaluated from distributions of M(2). A dipolar filter was applied to eliminate the contribution of bound rubber. In the first approach the Hahn-echo decays were fitted with a theoretical relationship to obtain the average values of the (1)H residual second moment and correlation time <τ(c)>. For the mobile EPDM segments the power-law distribution of correlation function was compared to the exponential correlation function and found inadequate in the long-time regime. In the second approach a log-Gauss distribution for the correlation time was assumed. Furthermore, using an averaged value of the correlation time, the distributions of the residual second moment were determined using an inverse Laplace transform for the entire series of measured samples. The unfilled EPDM sample shows a bimodal distribution of residual second moments, which can be associated to the mobile polymer sub-chains (M(2) ≅ 6.1 rad (2) s(-2)) and the second one associated to the dangling chains M(2) ≅ 5.4 rad(2) s(-2)). By restraining the mobility of bound rubber, the carbon-black fillers induce diversity in the segmental dynamics like the apparition of a distinct mobile component and changes in the distribution of mobile and free-end polymer segments. Copyright © 2010 Elsevier Inc. All rights reserved.

The heterogeneity of segmental dynamics of filled EPDM by 1H transverse relaxation NMR

NASA Astrophysics Data System (ADS)

Moldovan, D.; Fechete, R.; Demco, D. E.; Culea, E.; Blümich, B.; Herrmann, V.; Heinz, M.

2011-01-01

Residual second moment of dipolar interactions M∼2 and correlation time segmental dynamics distributions were measured by Hahn-echo decays in combination with inverse Laplace transform for a series of unfilled and filled EPDM samples as functions of carbon-black N683 filler content. The fillers-polymer chain interactions which dramatically restrict the mobility of bound rubber modify the dynamics of mobile chains. These changes depend on the filler content and can be evaluated from distributions of M∼2. A dipolar filter was applied to eliminate the contribution of bound rubber. In the first approach the Hahn-echo decays were fitted with a theoretical relationship to obtain the average values of the 1H residual second moment and correlation time <τc>. For the mobile EPDM segments the power-law distribution of correlation function was compared to the exponential correlation function and found inadequate in the long-time regime. In the second approach a log-Gauss distribution for the correlation time was assumed. Furthermore, using an averaged value of the correlation time, the distributions of the residual second moment were determined using an inverse Laplace transform for the entire series of measured samples. The unfilled EPDM sample shows a bimodal distribution of residual second moments, which can be associated to the mobile polymer sub-chains (M∼2≅6.1 rad s) and the second one associated to the dangling chains M∼2≅5.4 rad s). By restraining the mobility of bound rubber, the carbon-black fillers induce diversity in the segmental dynamics like the apparition of a distinct mobile component and changes in the distribution of mobile and free-end polymer segments.

[Validation of cold chain during distribution of parenteral nutrition].

PubMed

Tuan, Federico; Perone, Virginia; Verdini, Rocio; Pell, Maria Betina; Traverso, Maria Luz

2015-09-01

this study aims to demonstrate the suitability of the process used to condition the extemporaneous mixtures of parenteral nutrition for distribution, considering the objective of preserving the cold chain during transport until it reaches the patient, necessary to ensure stability, effectiveness and safety of these mixtures. concurrent validation, design and implementation of a protocol for evaluating the process of packaging and distribution of MNPE developed by a pharmaceutical laboratory. Running tests, according to predefined acceptance criteria. It is performed twice, in summer and on routes that require longer transfer time. Evaluation of conservation of temperature by monitoring the internal temperature values of each type of packaging, recorded by data loggers calibrated equipment. the different tests meet the established criteria. The collected data ensure the maintenance of the cold chain for longer than the transfer time to the most distant points. this study establishes the suitability of the processes to maintaining the cold chain for transfer from the laboratory to the patient pharmacist. Whereas the breaking of cold chain can cause changes of compatibility and stability of parenteral nutrition and failures nutritional support, this study contributes to patient safety, one of the relevant dimensions of quality of care the health. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

A New Approach to Site Demand-Based Level Inventory Optimization

DTIC Science & Technology

2016-06-01

Command (2016) Navy supply chain management. Accessed April 17, 2016, https://www.navsup.navy.mil/navsup/capabilities/nscm Salmeron J, Craparo E (2016...Engineering 53: 122-142. Naval Supply Systems Command (2016a) Navy supply chain management. Accessed April 17, 2016, https://www.navsup.navy.mil...distribution is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) Naval Supply Systems Command (NAVSUP) supports Navy, Marine Corps

Estimating the Fully Burdened Cost of Fuel Using an Input-Output Model - A Micro-Level Analysis

DTIC Science & Technology

2011-09-01

The multilocation distribution model used by Lu and Rencheng to evaluate an international supply chain (From: Lu & Rencheng, 2007...IO model to evaluate an international supply chain specifically for a multilocation production system. Figure 2 illustrates such a system. vendor...vendor vendor Target markets Production plants Material vendor Figure 2. The multilocation distribution model used by Lu and Rencheng to

Kinetic aspects of the coil-stretch transition of polymer chains in dilute solution under extensional flow

NASA Astrophysics Data System (ADS)

Hernández Cifre, J. G.; García de la Torre, J.

2001-11-01

When linear polymer chains in dilute solution are subject to extensional flow, each chain in the sample experiences the coil-stretch transition at a different time. Using Brownian dynamics simulation, we have studied the distribution of transition times in terms of the extensional rate and the length of the chains. If instead of time one characterizes the effect of the flow by the accumulated strain, then the distribution and its moments seem to take general forms, independent of molecular weight and flow rate, containing some numerical, universal constants that have been evaluated from the dynamical simulation. The kinetics of the transition, expressed by the time-dependence of the fraction of remaining coils, has also been simulated, and the results for the kinetic rate constant has been rationalized in a manner similar to that used for the transition time. The molecular individualism, characterized in this work by the distribution of transition times, is related to the excess of the applied extensional rate over its critical value, which will determine the transition time and other features of the coil-stretch transition.

Predicting side-chain conformations of methionine using a hard-sphere model with stereochemical constraints

NASA Astrophysics Data System (ADS)

Virrueta, A.; Gaines, J.; O'Hern, C. S.; Regan, L.

2015-03-01

Current research in the O'Hern and Regan laboratories focuses on the development of hard-sphere models with stereochemical constraints for protein structure prediction as an alternative to molecular dynamics methods that utilize knowledge-based corrections in their force-fields. Beginning with simple hydrophobic dipeptides like valine, leucine, and isoleucine, we have shown that our model is able to reproduce the side-chain dihedral angle distributions derived from sets of high-resolution protein crystal structures. However, methionine remains an exception - our model yields a chi-3 side-chain dihedral angle distribution that is relatively uniform from 60 to 300 degrees, while the observed distribution displays peaks at 60, 180, and 300 degrees. Our goal is to resolve this discrepancy by considering clashes with neighboring residues, and averaging the reduced distribution of allowable methionine structures taken from a set of crystallized proteins. We will also re-evaluate the electron density maps from which these protein structures are derived to ensure that the methionines and their local environments are correctly modeled. This work will ultimately serve as a tool for computing side-chain entropy and protein stability. A. V. is supported by an NSF Graduate Research Fellowship and a Ford Foundation Fellowship. J. G. is supported by NIH training Grant NIH-5T15LM007056-28.

Role of the Freight Sector in Future Climate Change Mitigation Scenarios

DOE PAGES

Muratori, Matteo; Smith, Steven J.; Kyle, Page; ...

2017-02-27

The freight sector's role is examined using the Global Change Assessment Model (GCAM) for a range of climate change mitigation scenarios and future freight demand assumptions. Energy usage and CO 2 emissions from freight have historically grown with a correlation to GDP, and there is limited evidence of near-term global decoupling of freight demand from GDP. Over the 21 st century, greenhouse gas (GHG) emissions from freight are projected to grow faster than passenger transportation or other major end-use sectors, with the magnitude of growth dependent on the assumed extent of long-term decoupling. In climate change mitigation scenarios that applymore » a price to GHG emissions, mitigation of freight emissions (including the effects of demand elasticity, mode and technology shifting, and fuel substitution) is more limited than for other demand sectors. In such scenarios, shifting to less-emitting transportation modes and technologies is projected to play a relatively small role in reducing freight emissions in GCAM. Finally, by contrast, changes in the supply chain of liquid fuels that reduce the fuel carbon intensity, especially deriving from large-scale use of biofuels coupled to carbon capture and storage technologies, are responsible for the majority of freight emissions mitigation, followed by price-induced reduction in freight demand services.« less

Role of the Freight Sector in Future Climate Change Mitigation Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muratori, Matteo; Smith, Steven J.; Kyle, Page

The freight sector's role is examined using the Global Change Assessment Model (GCAM) for a range of climate change mitigation scenarios and future freight demand assumptions. Energy usage and CO 2 emissions from freight have historically grown with a correlation to GDP, and there is limited evidence of near-term global decoupling of freight demand from GDP. Over the 21 st century, greenhouse gas (GHG) emissions from freight are projected to grow faster than passenger transportation or other major end-use sectors, with the magnitude of growth dependent on the assumed extent of long-term decoupling. In climate change mitigation scenarios that applymore » a price to GHG emissions, mitigation of freight emissions (including the effects of demand elasticity, mode and technology shifting, and fuel substitution) is more limited than for other demand sectors. In such scenarios, shifting to less-emitting transportation modes and technologies is projected to play a relatively small role in reducing freight emissions in GCAM. Finally, by contrast, changes in the supply chain of liquid fuels that reduce the fuel carbon intensity, especially deriving from large-scale use of biofuels coupled to carbon capture and storage technologies, are responsible for the majority of freight emissions mitigation, followed by price-induced reduction in freight demand services.« less

Role of the Freight Sector in Future Climate Change Mitigation Scenarios.

PubMed

Muratori, Matteo; Smith, Steven J; Kyle, Page; Link, Robert; Mignone, Bryan K; Kheshgi, Haroon S

2017-03-21

The freight sector's role is examined using the Global Change Assessment Model (GCAM) for a range of climate change mitigation scenarios and future freight demand assumptions. Energy usage and CO 2 emissions from freight have historically grown with a correlation to GDP, and there is limited evidence of near-term global decoupling of freight demand from GDP. Over the 21 st century, greenhouse gas (GHG) emissions from freight are projected to grow faster than passenger transportation or other major end-use sectors, with the magnitude of growth dependent on the assumed extent of long-term decoupling. In climate change mitigation scenarios that apply a price to GHG emissions, mitigation of freight emissions (including the effects of demand elasticity, mode and technology shifting, and fuel substitution) is more limited than for other demand sectors. In such scenarios, shifting to less-emitting transportation modes and technologies is projected to play a relatively small role in reducing freight emissions in GCAM. By contrast, changes in the supply chain of liquid fuels that reduce the fuel carbon intensity, especially deriving from large-scale use of biofuels coupled to carbon capture and storage technologies, are responsible for the majority of freight emissions mitigation, followed by price-induced reduction in freight demand services.

Market assessment of tuberculosis diagnostics in India in 2013.

PubMed

Maheshwari, P; Chauhan, K; Kadam, R; Pujani, A; Kaur, M; Chitalia, M; Dabas, H; Perkins, M D; Boehme, C C; Denkinger, C M; Raizada, N; Ginnard, J; Jefferson, C; Pantoja, A; Rupert, S; Kik, S V; Cohen, C; Chedore, P; Satyanarayana, S; Pai, M

2016-03-01

India represents a significant potential market for new tests. We assessed India's market for tuberculosis (TB) diagnostics in 2013. Test volumes and unit costs were assessed for tuberculin tests, interferon-gamma release assays, sputum smear microscopy, serology, culture, speciation testing, nucleic-acid amplification tests (i.e., in-house polymerase chain reaction, Xpert(®) MTB/RIF, line-probe assays) and drug susceptibility testing. Data from the public sector were collected from the Revised National TB Control Programme reports. Private sector data were collected through a survey of private laboratories and practitioners. Data were also collected from manufacturers. In 2013, India's public sector performed 19.2 million tests, with a market value of US$22.9 million. The private sector performed 13.6 million tests, with a market value of US$60.4 million when prices charged to the patient were applied. The overall market was US$70.8 million when unit costs from the ingredient approach were used for the 32.8 million TB tests performed in the entire country. Smear microscopy was the most common test performed, accounting for 25% of the overall market value. India's estimated market value for TB diagnostics in 2013 was US$70.8 million. These data should be of relevance to test developers, donors and implementers.

An Assessment of the Regional and National Socio-Economic Impacts of the 2007 Rift Valley Fever Outbreak in Kenya

PubMed Central

Rich, Karl M.; Wanyoike, Francis

2010-01-01

Although Rift Valley fever (RVF) has significant impacts on human health and livestock production, it can also induce significant (and often overlooked) economic losses among various stakeholders in the marketing chain. This work assesses and quantifies the multi-dimensional socio-economic impacts of the 2007 RVF outbreak in Kenya based on a rapid assessment of livestock value chains in the northeast part of the country and a national macroeconomic analysis. Although study results show negative impacts among producers in terms of food insecurity and reductions in income, we also found significant losses among other downstream actors in the value chain, including livestock traders, slaughterhouses, casual laborers, and butchers, as well as other, non-agricultural sectors. The study highlights the need for greater sensitivity and analyses that address the multitude of economic losses resulting from an animal disease to better inform policy and decision making during animal health emergencies. PMID:20682906

PREFACE: Trends in Aerospace Manufacturing 2009 International Conference

NASA Astrophysics Data System (ADS)

Ridgway, Keith; Gault, Rosemary; Allen, Adrian

2011-12-01

The aerospace industry is rapidly changing. New aircraft structures are being developed and aero-engines are becoming lighter and more environmentally friendly. In both areas, innovative materials and manufacturing methods are used in an attempt to get maximum performance for minimum cost. At the same time, the structure of the industry has changed and there has been a move from large companies designing, manufacturing components and assembling aircraft to one of large global supply chains headed by large system integrators. All these changes have forced engineers and managers to bring in innovations in design, materials, manufacturing technologies and supply chain management. In September 2009, the Advanced Manufacturing Research Centre (AMRC) at the University of Sheffield held the inaugural Trends in Aerospace Manufacturing conference (TRAM09). This brought together 28 speakers over two days, who presented in sessions on advanced manufacturing trends for the aerospace sector. Areas covered included new materials, including composites, advanced machining, state of the art additive manufacturing techniques, assembly and supply chain issues.

Food loss rate in food supply chain using material flow analysis.

PubMed

Ju, Munsol; Osako, Masahiro; Harashina, Sachihiko

2017-03-01

The food loss rate is a factor that represents food consumption efficiency. To improve food consumption efficiency, we need to fundamentally quantify food loss at national and global levels. This study examines food and food waste flow and calculates the food loss rate in the food supply chain by targeting Japan. We analyzed inedible food waste and avoidable food losses in wholesale, manufacturing, retail, food services, and households and considered different supply chain pathways, different food categories representing whole Japanese meals, and weight changes after cooking. The results are as follows: (1) Japan has an overall rate of avoidable food losses of approximately 15% for meals (excluding agricultural losses), (2) the supply sector with the highest food loss rate is food services, and (3) the food category with the highest food loss rate is vegetables. Finally, we proposed a model for calculating food loss rates that could be used for future analysis in Japan or other countries. Copyright © 2017 Elsevier Ltd. All rights reserved.

Symmetry protected topological Luttinger liquids and the phase transition between them

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2018-01-01

We show that a doped spin-1/2 ladder with antiferromagnetic intra-chain and ferromagnetic inter-chain coupling is a symmetry protected topologically non-trivial Luttinger liquid. Turning on a large easy-plane spin anisotropy drives the system to a topologically-trivial Luttinger liquid. Both phases have full spin gaps and exhibit power-law superconducting pair correlation. The Cooper pair symmetry is singletmore » $$d_{xy}$$ in the non-trivial phase and triplet $$S_z=0$$ in the trivial phase. The topologically non-trivial Luttinger liquid exhibits gapless spin excitations in the presence of a boundary, and it has no non-interacting or mean-field theory analog even when the fluctuating phase in the charge sector is pinned. As a function of the strength of spin anisotropy there is a topological phase transition upon which the spin gap closes. We speculate these Luttinger liquids are relevant to the superconductivity in metalized integer spin ladders or chains.« less

Requirements For Security Sector Reform Success

DTIC Science & Technology

2016-05-26

Advanced Military Studies United States Army Command and General Staff College Fort Leavenworth, Kansas 2016 Approved for public release...ACRONYM(S) School of Advanced Military Studies , Advanced Military Studies Program 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION...political and economic stability are required for Security Sector Reform (SSR) success over the long term. This study suggests that states with stable

Energy Security of Army Installations & Islanding Methodologies

DTIC Science & Technology

2012-01-16

islanding of energy generation and distribution networks including electricity, natural gas , steam , liquid fuel, water, and others for the diverse...in geopolitics and war/peace/terrorism Breakthrough in reformation process of synthetic fuel production Hydrogen focused energy sector Oil and gas ...of synthetic AMf Q production Hydrogen focused energy sector D Of and gas remain available and cost-effective Natural Gas prices cut In

Pilot and Controller Workload and Situation Awareness with Three Traffic Management Concept

NASA Technical Reports Server (NTRS)

Vu, Kim-Phuong L.; Strybel, Thomas Z.; Kraut, Joshua; Bacon, Paige; Minakata, Katsumi; Battiste, Vernol; Johnson, Walter

2010-01-01

This paper reports on workload and situation awareness of pilots and controllers participating in a human-in-the-loop simulation using three different distributed air-ground traffic management concepts. Eight experimental pilots started the scenario in an en-route phase of flight and were asked to avoid convective weather while performing spacing and merging tasks along with a continuous descent approach (CDA) into Louisville Standiford Airport (SDF). Two controllers managed the sectors through which the pilots flew, with one managing a sector that included the Top of Descent, and the other managing a sector that included the merge point for arrival into SDF. At 3-minute intervals in the scenario, pilots and controllers were probed on their workload or situation awareness. We employed one of three concepts of operation that distributed separation responsibility across human controllers, pilots, and automation to measure changes in operator situation awareness and workload. We found that when pilots were responsible for separation, they had higher levels of awareness, but not necessarily higher levels of workload. When controllers are responsible and actively engaged, they showed higher workload levels compared to pilots and changes in awareness that were dependent on sector characteristics.

Health sector reform in Brazil: a case study of inequity.

PubMed

Almeida, C; Travassos, C; Porto, S; Labra, M E

2000-01-01

Health sector reform in Brazil built the Unified Health System according to a dense body of administrative instruments for organizing decentralized service networks and institutionalizing a complex decision-making arena. This article focuses on the equity in health care services. Equity is defined as a principle governing distributive functions designed to reduce or offset socially unjust inequalities, and it is applied to evaluate the distribution of financial resources and the use of health services. Even though in the Constitution the term "equity" refers to equal opportunity of access for equal needs, the implemented policies have not guaranteed these rights. Underfunding, fiscal stress, and lack of priorities for the sector have contributed to a progressive deterioration of health care services, with continuing regressive tax collection and unequal distribution of financial resources among regions. The data suggest that despite regulatory measures to increase efficiency and reduce inequalities, delivery of health care services remains extremely unequal across the country. People in lower income groups experience more difficulties in getting access to health services. Utilization rates vary greatly by type of service among income groups, positions in the labor market, and levels of education.