An Aquatic Journey toward Aeolis Mons (Mount Sharp): Sedimentary Rock Evidence observed by Mars Science Laboratory

NASA Astrophysics Data System (ADS)

Gupta, Sanjeev; Edgar, Lauren; Williams, Rebecca; Rubin, David; Yingst, Aileen; Lewis, Kevin; Kocurek, Gary; Anderson, Ryan; Dromart, Gilles; Edgett, Ken; Hardgrove, Craig; Kah, Linda; Mangold, Nicolas; Milliken, Ralph; Minitti, Michelle; Palucis, Marisa; Rice, Melissa; Stack, Katie; Sumner, Dawn; Williford, Ken

2014-05-01

Since leaving Yellowknife Bay (summer 2013), Mars Science Laboratory Curiosity has investigated a number of key outcrops as it traverses along the Rapid Transit Route toward the entry point to begin its investigations of the extensive rock outcrops at the base of Mount Sharp. Rover observations are characterizing the variability of lithologies and sedimentary facies along the traverse and establishing stratigraphic relationships with the aim of reconstructing depositional processes and palaeoenvironments. Here, we report on sedimentological and stratigraphic observations based on images from the Mastcam and MAHLI instruments at Shaler and the Darwin waypoint. The informally named Shaler outcrop, which forms part of the Glenelg member of the Yellowknife Bay formation [1] is remarkable for the preservation of a rich suite of sedimentary structures and architecture, and was investigated on sols 120-121 and 309-324. The outcrop forms a pebbly sandstone body that is ~0.7 m thick and extends for up to 20 m. Shaler is largely characterized by pebbly sandstone facies showing well-developed decimeter-scale trough cross-stratification. Bedding geometries indicate sub-critical angles of climb, resulting in preservation of only the lee slope deposits. The grain size, and the presence and scale of cross-stratification imply sediment transport and deposition by unidirectional currents in a fluvial sedimentary environment. Curiosity investigated the informally named Darwin waypoint between sols 390 and 401, making detailed Mastcam and MAHLI observations at two separate locations. The Darwin outcrop comprises light-toned sandstone beds separated by darker pebbly sandstones. MAHLI observations permit differentiation of distinct sedimentary facies. The Altar Mountain facies is a poorly sorted pebbly sandstone that is rich in fine pebbles. Pebbles are sub-angular to sub-rounded in shape and show no preferred orientation or fabric. Pebbles and sand grains show clast-to-clast contacts. The clast-supported nature of the facies, the presence of coarse sand grains to fine pebbles, and the occurrence of some rounding of clasts indicates that these are sedimentary clasts that have been transported by aqueous flows. However, the absence of a well-sorted fabric, size grading of clast, and major rounding of grains suggests that these pebbly sandstones were rapidly deposited rather than built up from sustained fluvial reworking, implying that the deposits may be the result of more ephemeral river flows rather than sustained flow discharges. The Bardin Bluffs facies overlies the Altar Mountain facies and shows a more sand-dominated fabric with a smaller proportion of floating fine pebbles. This facies is also clast-supported but contains fewer pebbles and shows an overall fining-up trend. This facies is also interpreted to represent fluvial deposition albeit with a different grain size distribution than the Altar Mountains facies. We will compare and contrast the varying sedimentary fabrics and facies to develop models for the variety of aqueous fluvial transport processes that have led to the deposition of sedimentary rocks en route to Mount Sharp. The origin of these sedimentary rocks with relation to fluvial fan processes in Gale Crater will be discussed. References: [1] Grotzinger, J.P. et al Science 2013, doi: 10.1126/science.1242777.

Sedimentary processes and depositional environments of the Horn River Shale in British Columbia, Canada

NASA Astrophysics Data System (ADS)

Yoon, Seok-Hoon; Koh, Chang-Seong; Joe, Young-Jin; Woo, Ju-Hwan; Lee, Hyun-Suk

2017-04-01

The Horn River Basin in the northeastern British Columbia, Canada, is one of the largest unconventional gas accumulations in North America. It consists mainly of Devonian shales (Horn River Formation) and is stratigraphically divided into three members, the Muskwa, Otterpark and Evie in descending order. This study focuses on sedimentary processes and depositional environments of the Horn River shale based on sedimentary facies analysis aided by well-log mineralogy (ECS) and total organic carbon (TOC) data. The shale formation consists dominantly of siliceous minerals (quartz, feldspar and mica) and subordinate clay mineral and carbonate materials, and TOC ranging from 1.0 to 7.6%. Based on sedimentary structures and micro texture, three sedimentary facies were classified: homogeneous mudstone (HM), indistinctly laminated mudstone (ILM), and planar laminated mudstone (PLM). Integrated interpretation of the sedimentary facies, lithology and TOC suggests that depositional environment of the Horn River shale was an anoxic quiescent basin plain and base-of-slope off carbonate platform or reef. In this deeper marine setting, organic-rich facies HM and ILM, dominant in the Muskwa (the upper part of the Horn River Formation) and Evie (the lower part of the Horn River Formation) members, may have been emplaced by pelagic to hemipelagic sedimentation on the anoxic sea floor with infrequent effects of low-density gravity flows (turbidity currents or nepheloid flows). In the other hand, facies PLM typifying the Otterpark Member (the middle part of the Horn River Formation) suggests more frequent inflow of bottom-hugging turbidity currents punctuating the hemipelagic settling of the background sedimentation process. The stratigraphic change of sedimentary facies and TOC content in the Horn River Formation is most appropriately interpreted to have been caused by the relative sea-level change, that is, lower TOC and frequent signal of turbidity current during the sea-level lowstand and vice versa. Therefore, the Horn River Formation represents an earlier upward shallowing environmental change from a deep basin (Evie) to shallower marginal slope (middle Otterpark), then turning back to the deeper marine environment (Muskwa) in association with overall regression-lowstand-transgression of the sea level. (This study is supported by "Research on Exploration Technologies and an Onsite Verification to Enhance the Fracturing Efficiency of a Shale Gas Formation" of the Korea Institute of Energy Technology Evaluation and Planning (KETEP), granted financial resource from the Ministry of Trade, Industry & Energy, Republic of Korea.)

Relationships Between Magnetic Susceptibility and Sedimentary Facies Along AL Qahmah, Southern Red Sea Coast

NASA Astrophysics Data System (ADS)

Nabhan, A. I.; Yang, W.

2016-12-01

Facies and magnetic parameters of an arid siliciclastic coast were investigated in Al Qahmah, Saudi Arabia. The purpose of the survey was to map and understand the distribution of magnetic minerals in the different sedimentary facies in a 20-km2 area. Four NW-SE profiles parallel to shoreline and thirty-nine roughly perpendicular NE-SW profiles were measured. Petrographic study of sediment composition and texture of 152 samples was conducted. The coast sediments contain six lithofacies: beach, washover fan, tidal channel, eolian dune, sabkha, and wadi. The high concentration of heavy minerals in beach and dune facies causes high magnetic of susceptibility. Mineral composition of the total fraction in these facies confirms the presence of magnetite and ilmenite. The high values of susceptibility in beach and dune facies are attributed to strong winnowing and wave processes that control the pattern of transport, sorting of magnetic minerals in the beach facies. These minerals are picked up and moved by wind at low tide to form extensive low dune fields near the beach. The results showed that magnetic measurements are a sensitive and fast method, which can be used for studying the distribution of magnetic minerals in the sedimentary facies and help interpret various controlling processes.

Stratigraphy of the Morrison and related formations, Colorado Plateau region, a preliminary report

USGS Publications Warehouse

Craig, Lawrence C.; ,

1955-01-01

Three subdivisions of the Jurassic rocks of the Colorado Plateau region are: the Glen Canyon group, mainly eolian and fluvial sedimentary rocks; the San Rafael group, marine and marginal marine sedimentary rocks; and the Morrison formation, fluvial and lacustrine sedimentary rocks. In central and eastern Colorado the Morrison formation has not been differ- entiated into members. In eastern Utah, northeastern Arizona, northwestern New Mexico, and in part of western Colorado, the Morrison may be divided into a lower part and an upper part; each part has two members which are di1Ierentiated on a lithologic basis. Where differentiated, the lower part of the Morrison consists either of the Salt Wash member or the Recapture member or both; these are equivalent in age and inter tongue and intergrade over a broad area in the vicinity of the Four Corners area of New Mexico, Colorado, Arizona, and Utah. The Salt Wash member is present in eastern Utah and parts of western Colorado, north- eastern Arizona, and northwestern New Mexico. It was formed as a large alluvial plain or 'fan' by an aggrading system of braided streams diverging to the north and east from an apex in south-central Utah. The major source area of the Salt Wash was to the southwest of south-central Utah, probably in west-central Arizona and southeastern California. The member was derived mainly from sedimentary rocks. The Salt Wash deposits grade from predomi- nantly coarse texture at the apex of the 'fan' to predominantly flne texture at the margin of the 'fan'. The Salt Wash member has been arbitrarily divided into four facies: a con- glomera tic sandstone facies, a sandstone and mudstone facies, a claystone and lenticular sandstone facies, and a claystone and limestone facies. The Recapture member of the Morrison formation is present in northeastern Arizona, northwestern New Mexico, and small areas of southeastern Utah and southwestern Colorado near the Four Corners. It was formed as a large alluvial plain or 'fan' by an aggrading system of braided streams. The Recap- ture deposits grade from predominantly coarse texture sedimentary rocks to predominantly fine texture and have been arbitrarily divided into three facies: a conglomeratic sandstone facies, a sandstone facies, and a claystone and sandstone facies. The distribution of the facies indicates that the major source area of the Recapture was south of Gallup, N. Mex., probably in west-central New Mexico. The Recapture was derived from an area of intrusive and extrusive igneous rocks, metamorphic rocks, and sedimentary rocks. The upper part of the Morrison formation consists of the Westwater Canyon member and the Brushy Basin member. The Westwater Canyon member forms the lower portion of the upper part of the Morrison in northeastern Arizona, northwestern New Mexico, and places in southeastern Utah and southwestern Colorade near the Four Corners, and it intertongues and intergrades northward into the Brushy Basin member. The Westwater Canyon member was formed as a large alluvial plain or 'fan' by an aggrading system of braided streams. The Westwater deposits grade from predominantly coarse-textured sedimentary rocks to somewhat finer textured sedimentary rocks, and have been arbitrarily divided into two facies: a conglomeratic sandstone facies and a sandstone facies. The distribution of the facies indicates that the major source area of the Westwater was south of Gallup, N. Mex., probably in west-central New Mexico. The Westwater was derived from an area of intrusive and extrusive igneous rocks, metamorphic rocks, and sedimentary rocks. The similarity of the distribution and composition of the Westwater to the Recapture indicates that the Westwater represents essentially a continuation of deposition on the Recapture 'fan'; the Westwater contains, however, considerably coarser materials. Whereas the S

Predicted facies, sedimentary structures and potential resources of Jurassic petroleum complex in S-E sWestern Siberia (based on well logging data)

NASA Astrophysics Data System (ADS)

Prakojo, F.; Lobova, G.; Abramova, R.

2015-11-01

This paper is devoted to the current problem in petroleum geology and geophysics- prediction of facies sediments for further evaluation of productive layers. Applying the acoustic method and the characterizing sedimentary structure for each coastal-marine-delta type was determined. The summary of sedimentary structure characteristics and reservoir properties (porosity and permeability) of typical facies were described. Logging models SP, EL and GR (configuration, curve range) in interpreting geophysical data for each litho-facies were identified. According to geophysical characteristics these sediments can be classified as coastal-marine-delta. Prediction models for potential Jurassic oil-gas bearing complexes (horizon J11) in one S-E Western Siberian deposit were conducted. Comparing forecasting to actual testing data of layer J11 showed that the prediction is about 85%.

Evaluation of conditions along the grounding line of temperate marine glaciers: An example from Muir Inlet, Glacier Bay, Alaska

USGS Publications Warehouse

Seramur, K.C.; Powell, R.D.; Carlson, P.R.

1997-01-01

In the marine environment, stability of the glacier terminus and the location of subglacial streams are the dominant controls on the distribution of grounding-line deposits within morainal banks. A morainal bank complex in Muir Inlet, Glacier Bay, SE Alaska, is used to develop a model of terminus stability and location of subglacial streams along the grounding line of temperate marine glaciers. This model can be used to interpret former grounding-line conditions in other glacimarine settings from the facies architecture within morainal bank deposits. The Muir Inlet morainal bank complex was deposited between 1860 A.D. and 1899 A.D., and historical observations provide a record of terminus positions, glacial retreat rates and sedimentary sources. These data are used to reconstruct the depositional environment and to develop a correlation between sedimentary facies and conditions along the grounding line. Four seismic facies identified on the high-resolution seismic-reflection profiles are used to interpret sedimentary facies within the morainal bank complex. Terminus stability is interpreted from the distribution of sedimentary facies within three distinct submarine geomorphic features, a grounding-line fan; stratified ridges, and a field of push ridges. The grounding-line fan was deposited along a stable terminus and is represented on seismic-reflection profiles by two distinct seismic facies, a proximal and a distal fan facies. The proximal fan facies was deposited at the efflux of subglacial streams and indicates the location of former glacifluvial discharges into the sea. Stratified ridges formed as a result of the influence of a quasi-stable terminus on the distribution of sedimentary facies along the grounding line. A field of push ridges formed along the grounding line of an unstable terminus that completely reworked the grounding-line deposits through glacitectonic deformation. Between 1860 A.D. and 1899 A.D. (39 years), 8.96 x 108 m3 of sediment were deposited within the Muir Inlet morainal bank complex at an average annual sediment accumulation rate of 2.3 x 107 m3/a. This rate represents the annual sediment production capacity of the glacier when the Muir Inlet drainage basin is filled with glacial ice.

Recent benthic foraminifera and sedimentary facies distribution of the Abu Dhabi (United Arab Emirates) coastline

NASA Astrophysics Data System (ADS)

Fiorini, Flavia; Lokier, Stephen W.

2014-05-01

The distribution of benthic foraminifera and sedimentary facies from Recent coastline environments adjacent to the coastline of Abu Dhabi (UAE) was studied in detail with the aim to: 1) provide reliable analogs for understanding and interpreting the depositional environment of ancient shallow-marine sediments from the UAE; 2) assess any modifications in the distribution of benthic environments and sedimentary facies in an area affected by significant anthropogenic activities - particular construction and land reclamation. A total of 100 sea-floor sediment samples were collected in different shallow-marine sedimentary environments (nearshore shelf, beach-front, channels, ooid shoals, lagoon and mangals) close to the coastline of Abu Dhabi Island. Where possible, we revisited the sampling sites used in several studies conducted in the middle of last century (prior to any significant anthropogenic activities) to assess temporal changes in Recent benthic foraminifera and sedimentary facies distribution during the last 50 years. Five foraminiferal assemblages were recognized in the studied area. Species with a porcellaneous test mainly belonging to the genera Quinqueloculina, Triloculina, Spiroloculina, Sigmoilinita are common in all studied areas. Larger benthic foraminifera Peneroplis and Spirolina are particularly abundant in samples collected on seaweed. Hyaline foraminifera mostly belonging to the genera Elphidium, Ammonia, Bolivina and Rosalina are also common together with Miliolidae in the nearshore shelf and beach front. Agglutinated foraminifera (Clavulina, Textularia, Ammobaculites and Reophax) are present in low percentages. The species belonging to the genera Ammobaculites and Reophax are present only in the finest grain samples particularly in lagoons and mangal environments and have not been reported previously in the studied area. The majority of the ooid shoal sediments, the coarser sediments of the beach-front and samples collected in dredged channels do not contain living foraminifera and the dead assemblage is mostly composed of a few specimens of coarse-sized Miliolidae with fragmented or abraded tests, probably transported from nearby environments. While the shallow-water settings of the Abu Dhabi coastline continue to be areas of active carbonate sedimentation, there have been significant changes in facies distributions over the last 50 years. In particular: × The opportunistic genera Ammonia and Elphidium have become more abundant. Reophax and Ammobaculites are reported in the area for the first time. × With anthropogenic activities some environments, such as inner lagoons, are lost whilst other areas show resilience to anthropogenic activities with little change in sedimentary facies distribution and foraminiferal assemblage. × No living foraminifera are found in dredged channels. The detailed analysis of these changes in foraminifera distribution and sedimentary facies allows us to further our understanding of the effects of anthropogenic activities on shallow-marine environments. By so doing, we are better able to distinguish between those changes that result from anthropogenic activities and those that are a result of naturally-occurring environmental perturbations.

Sedimentary geology of the middle Carboniferous of the Donbas region (Dniepr-Donets Basin, Ukraine).

PubMed

van Hinsbergen, Douwe J J; Abels, Hemmo A; Bosch, Wolter; Boekhout, Flora; Kitchka, Alexander; Hamers, Maartje; van der Meer, Douwe G; Geluk, Mark; Stephenson, Randell A

2015-03-20

The Paleozoic Dniepr-Donets Basin in Belarus, Ukraine, and Russia forms a major hydrocarbon province. Although well- and seismic data have established a 20 km thick stratigraphy, field-studies of its sediments are scarce. The inverted Donbas segment (Ukraine) exposes the middle Carboniferous part of the basin's stratigraphy. Here, we provide detailed sedimentological data from 13 sections that cover 1.5 of the total of 5 km of the Bashkirian and Moscovian stages and assess the paleoenvironment and paleo-current directions. Middle Carboniferous deposition occurred in a shelf environment, with coal deposition, subordinate fluvial facies, and abundant lower and middle shoreface facies, comprising an intercalated package of potential source and reservoir rocks. Sedimentary facies indicate a paleodepth range from below storm wave base to near-coastal swamp environments. Sedimentation and subsidence were hence in pace, with subtle facies changes likely representing relative sea-level changes. Paleocurrent directions are remarkably consistently southeastward in time and space in the different sedimentary facies across the Donbas Fold Belt, illustrating a dominant sedimentary infill along the basin axis, with little basin margin influence. This suggests that the middle Carboniferous stratigraphy of the Dniepr-Donets basin to the northwest probably contains significant amounts of fluvial sandstones, important for assessing hydrocarbon reservoir potential.

Sedimentary geology of the middle Carboniferous of the Donbas region (Dniepr-Donets basin, Ukraine)

PubMed Central

van Hinsbergen, Douwe J. J.; Abels, Hemmo A.; Bosch, Wolter; Boekhout, Flora; Kitchka, Alexander; Hamers, Maartje; van der Meer, Douwe G.; Geluk, Mark; Stephenson, Randell A.

2015-01-01

The Paleozoic Dniepr-Donets Basin in Belarus, Ukraine, and Russia forms a major hydrocarbon province. Although well- and seismic data have established a 20 km thick stratigraphy, field-studies of its sediments are scarce. The inverted Donbas segment (Ukraine) exposes the middle Carboniferous part of the basin's stratigraphy. Here, we provide detailed sedimentological data from 13 sections that cover 1.5 of the total of 5 km of the Bashkirian and Moscovian stages and assess the paleoenvironment and paleo-current directions. Middle Carboniferous deposition occurred in a shelf environment, with coal deposition, subordinate fluvial facies, and abundant lower and middle shoreface facies, comprising an intercalated package of potential source and reservoir rocks. Sedimentary facies indicate a paleodepth range from below storm wave base to near-coastal swamp environments. Sedimentation and subsidence were hence in pace, with subtle facies changes likely representing relative sea-level changes. Paleocurrent directions are remarkably consistently southeastward in time and space in the different sedimentary facies across the Donbas Fold Belt, illustrating a dominant sedimentary infill along the basin axis, with little basin margin influence. This suggests that the middle Carboniferous stratigraphy of the Dniepr-Donets basin to the northwest probably contains significant amounts of fluvial sandstones, important for assessing hydrocarbon reservoir potential. PMID:25791400

Sedimentary Facies Mapping Based on Tidal Channel Network and Topographic Features

NASA Astrophysics Data System (ADS)

Ryu, J. H.; Lee, Y. K.; Kim, K.; Kim, B.

2015-12-01

Tidal flats on the west coast of Korea suffer intensive changes in their surface sedimentary facies as a result of the influence of natural and artificial changes. Spatial relationships between surface sedimentary facies distribution and benthic environments were estimated for the open-type Ganghwa tidal flat and semi closed-type Hwangdo tidal flat, Korea. In this study, we standardized the surface sedimentary facies and tidal channel index of the channel density, distance, thickness and order. To extract tidal channel information, we used remotely sensed data, such as those from the Korea Multi-Purpose Satellite (KOMPSAT)-2, KOMPSAT-3, and aerial photographs. Surface sedimentary facies maps were generated based on field data using an interpolation method.The tidal channels in each sediment facies had relatively constant meandering patterns, but the density and complexity were distinguishable. The second fractal dimension was 1.7-1.8 in the mud flat, about 1.4 in the mixed flat, and about 1.3 in the sand flat. The channel density was 0.03-0.06 m/m2 in the mud flat and less than 0.02 m/m2 in the mixed and sand flat areas of the two test areas. Low values of the tidal channel index, which indicated a simple pattern of tidal channel distribution, were identified at areas having low elevation and coarse-grained sediments. By contrast, high values of the tidal channel index, which indicated a dendritic pattern of tidal channel distribution, were identified at areas having high elevation and fine-grained sediments. Surface sediment classification based on remotely sensed data must circumspectly consider an effective critical grain size, water content, local topography, and intertidal structures.

Generation of sedimentary fabrics and facies by repetitive excavation and storm infilling of burrow networks Holocene of south Florida and Caicos Platform, B. W. I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tedesco, L.P.; Wanless, H.R.

Excavation of deep, open burrow networks and subsequent infilling with sediment from the surface produces an entirely new sedimentary deposit and results in obliteration to severe diagenetic transformation of precursor depositional facies. Repetitive excavation and infilling is responsible for creating the preserved depositional facies of many marine deposits. Excavating burrowers occur from intertidal to abyssal depths, and are important throughout the Phanerozoic. The repetitive coupling of deep, open burrow excavation with subsequent storm sediment infilling of open burrow networks is a gradual process that ultimately results in the loss of the original deposit and the generation of new lithologies, fabricsmore » and facies. The new lithologies are produced in the subsurface and possess fabrics, textures and skeletal assemblages that are not a direct reflection of either precursor facies or the surficial depositional conditions. Sedimentary facies generated by repetitive burrow excavation and infilling commonly are massively bedded and generally are mottled skeletal packstones. Skeletal grains usually are well-preserved and coarser components are concentrated in burrow networks, pockets and patches. The coarse skeletal components of burrow-generated facies are a mixture of coarse bioclasts from the precursor facies and both the coarse and fine skeletal material introduced from the sediment surface. Many so-called bioturbated or massive facies may, in fact, be primary depositional facies generated in the subsurface and represent severe diagenetic transformation of originally deposited sequences. In addition, mudstones and wackestones mottled with packstone patches may record storm sedimentation.« less

Distribution and tectonic implications of Cretaceous-Quaternary sedimentary facies in Solomon Islands

NASA Astrophysics Data System (ADS)

Turner, C. C.; Hughes, G. W.

1982-08-01

Sedimentary rocks of the Solomon Islands-Bougainville Arc are described in terms of nine widespread facies. Four facies associations are recognised by grouping facies which developed in broadly similar sedimentary environments. A marine pelagic association of Early Cretaceous to Miocene rocks comprises three facies. Facies Al: Early Cretaceous siliceous mudstone, found only on Malaita, is interpreted as deep marine siliceous ooze. Facies A2: Early Cretaceous to Eocene limestone with chert, overlies the siliceous mudstone facies, and is widespread in the central and eastern Solomons. It represents lithified calcareous ooze. Facies A3: Oligocene to Miocene calcisiltite with thin tuffaceous beds, overlies Facies A2 in most areas, and also occurs in the western Solomons. This represents similar, but less lithified calcareous ooze, and the deposits of periodic andesitic volcanism. An open marine detrital association of Oligocene to Recent age occurs throughout the Solomons. This comprises two facies. Facies B1 is variably calcareous siltstone, of hemipelagic origin; and Facies B2 consists of volcanogenic clastic deposits, laid down from submarine mass flows. A third association, of shallow marine carbonates, ranges in age from Late Oligocene to Recent. Facies C1 is biohermal limestone, and Facies C2 is biostromal calcarenite. The fourth association comprises areally restricted Pliocene to Recent paralic detrital deposits. Facies D1 includes nearshore clastic sediments, and Facies D2 comprises alluvial sands and gravels. Pre-Oligocene pelagic sediments were deposited contemporaneously with, and subsequent to, the extrusion of oceanic tholeiite. Island arc volcanism commenced along the length of the Solomons during the Oligocene, and greatly influenced sedimentation. Thick volcaniclastic sequences were deposited from submarine mass flows, and shallow marine carbonates accumulated locally. Fine grained graded tuffaceous beds within the marine pelagic association are interpreted as products of this volcanism, suggesting that the Santa Isabel-Malaita-Ulawa area, where these beds are prevalent, was relatively close to the main Solomons chain at this time. A subduction zone may have dipped towards the northeast beneath this volcanic chain. Pliocene to Pleistocene calcalkaline volcanism and tectonism resulted in the emergence of all large islands and led to deposition of clastic and carbonate facies in paralic, shallow and deep marine environments.

Early rifting deposition: examples from carbonate sequences of Sardinia (Cambrian) and Tuscany (Triassic-Jurassic), Italy: an analogous tectono-sedimentary and climatic context

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cocozza, T.; Gandin, A.

Lower Cambrian Ceroide Limestone (Sardinia) and Lower Jurassic Massiccio Limestone (Tuscany) belong to sequences deposited in analogous tectono-sedimentary context: the former linked to the Caledonian Sardic Phase, the latter to the Alpine Orogeny. Both units consist of massive pure limestone characterized by marginal and lagoonal sequences repeatedly interfingering in the same geological structure. This distribution indicates a morphology of the platforms composed of banks (marginal facies) and shallow basins (lagoonal facies) comparable with a Bahamian complex. Dolomitization affects patchily the massive limestone bodies, and karstic features, breccias, and sedimentary dikes occur at their upper boundary. Both units overlie early dolomitemore » and evaporites (sabkha facies) containing siliciclastic intercalations in their lower and/or upper part and are unconformably covered by open-shelf red (hematitic), nodular limestone Ammonitico Rosso facies). The sedimentary evolution of the two sequences appears to have been controlled by synsedimentary tectonics whose major effects are the end of the terrigenous input, the bank-and-basin morphology of the platform, the irregular distribution of the dolomitization, and the nodular fabric of the overlying facies. The end of the Bahamian-type system is marked by the karstification of the emerged blocks and is followed by their differential sinking and burial under red-nodular facies. From a geodynamic viewpoint, sequences composed of Bahamian-like platform carbonates followed by Ammonitico Rosso facies imply deposition along continental margins subjected to block-faulting during an extensional regime connected with the beginning of continental rifting. Moreover, the variation from sabkha to Bahamian conditions suggests the drifting of the continent from arid to humid, tropical areas.« less

Sedimentary facies analysis of the Mesozoic clastic rocks in Southern Peru (Tacna, 18°S): Towards a paleoenvironmental Redefinition and stratigraphic Reorganization

NASA Astrophysics Data System (ADS)

Alván, Aldo; Jacay, Javier; Caracciolo, Luca; Sánchez, Elvis; Trinidad, Inés

2018-07-01

The Mesozoic rocks of southern Peru comprise a Middle Jurassic to Early Cretaceous sedimentary sequence deposited during a time interval of approximately 34 Myr. In Tacna, these rocks are detrital and constitute the Yura Group (Callovian to Tithonian) and the Hualhuani Formation (Berriasian). Basing on robust interpretation of facies and petrographic analysis, we reconstruct the depositional settings of such units and provide a refined stratigraphic framework. Accordingly, nine types of sedimentary facies and six architectural elements are defined. They preserve the record of a progradational fluvial system, in which two styless regulated the dispersion of sediments: (i) a high-to moderate-sinuosity meandering setting (Yura Group), and a later (ii) incipient braided setting (Hualhuani Formation). The Yura Group (Callovian-Tithonian) represents the onset of floodplain deposits and lateral accretion of point-bar deposits sited on a semi-flat topography. Nonetheless, the progradational sequence was affected by at least two rapid marine ingressions occurred during Middle Callovian and Tithonian times. Such marine ingressions reveal the proximity of a shallow marine setting and incipient carbonate deposition. In response to increase in topographic gradient, the Hualhuani Formation (Berriasian) deposited as extensive multistory sandy channels. The mineralogy of the Mesozoic sediments suggests sediment supplies and intense recycling from a craton interior (i.e. Amazon Craton and/or plutonic sources) located eastward of the study area.

Evolving Concepts and Teaching Approaches In Tectonics and Sedimentation.

ERIC Educational Resources Information Center

Graham, Stephan Alan

1983-01-01

Discusses five recent advances in sedimentary tectonics, noting how they are incorporated into college curricula. Advances discussed include basin type, tectonic setting, facies analysis (in conjunction with basin type/setting), stratigraphic analysis of reflection seismic data, and quantitative analysis of subsidence histories of sedimentary…

Sedimentary facies and gas accumulation model of Lower Shihezi Formation in Shenguhao area, northern Ordos basin, China

NASA Astrophysics Data System (ADS)

Lin, Weibing; Chen, Lin; Lu, Yongchao; Zhao, Shuai

2017-04-01

The Lower Shihezi formation of lower Permian series in Shenguhao develops the highest gas abundance of upper Paleozoic in China, which has already commercially produced on a large scale. The structural location of Shenguhao belongs to the transition zone of Yimeng uplift and Yishan slope of northern Ordos basin, China. Based on the data of core, well logging and seismic, the sedimentary facies and gas accumulation model have been studied in this paper. Sedimentary facies analysis shows that the braided delta is the major facies type developed in this area during the period of Lower Shihezi formation. The braided delta can be further divided into two microfacies, distributary channel and flood plain. The distributary channel sandbody develops the characteristics of scour surface, trough cross beddings and normal grading sequences. Its seismic reflection structure is with the shape of flat top and concave bottom. Its gamma-ray logging curve is mainly in a box or bell shape. The flood plain is mainly composed of thick mudstones. Its seismic reflection structure is with the shape of parallel or sub-parallel sheet. Its gamma-ray logging curve is mainly in a linear tooth shape. On the whole, the distribution of sandbody is characterized by large thickness, wide area and good continuity. Based on the analysis of the sea level change and the restoration of the ancient landform in the period of Lower Shihezi formation, the sea level relative change and morphology of ancient landform have been considered as the main controlling factors for the development and distribution of sedimentary facies. The topography was with big topographic relief, and the sea level was relatively low in the early stage of Low Shihezi formation. The sandbody distributed chiefly along the landform depressions. The sandbody mainly developed in the pattern of multiple vertical superpositions with thick layer. In the later stage, landform gradually converted to be flat, and strata tended to be gentle. With the sea level gradually increasing, the lateral continuity of sandbody gradually became worse and gradually transformed into the pattern of single and isolated. The analysis of the typical gas accumulation profile of the Lower Shihezi Formation in the study area reveals that the formation of gas pools is mainly controlled by the distribution of sedimentary facies, faults and high point of structures. Generally, the types of gas pool developed in the study area can be divided into up dip pinch out gas pool, fault block gas pool and microstructure gas pool. The coal bearing strata of the underlying Taiyuan Formation and Shanxi Formation are the main hydrocarbon source rocks of the Lower Shihezi Formation. The gas transporting channel and lateral sealing composed by fault and sandbody constitute the key to form an effective gas pool, which usually made up of good lateral sealing, great thickness and good connectivity.

Fluvial geomorphic elements in modern sedimentary basins and their potential preservation in the rock record: A review

NASA Astrophysics Data System (ADS)

Weissmann, G. S.; Hartley, A. J.; Scuderi, L. A.; Nichols, G. J.; Owen, A.; Wright, S.; Felicia, A. L.; Holland, F.; Anaya, F. M. L.

2015-12-01

Since tectonic subsidence in sedimentary basins provides the potential for long-term facies preservation into the sedimentary record, analysis of geomorphic elements in modern continental sedimentary basins is required to understand facies relationships in sedimentary rocks. We use a database of over 700 modern sedimentary basins to characterize the fluvial geomorphology of sedimentary basins. Geomorphic elements were delineated in 10 representative sedimentary basins, focusing primarily on fluvial environments. Elements identified include distributive fluvial systems (DFS), tributive fluvial systems that occur between large DFS or in an axial position in the basin, lacustrine/playa, and eolian environments. The DFS elements include large DFS (> 30 km in length), small DFS (< 30 km in length), coalesced DFS in bajada or piedmont plains, and incised DFS. Our results indicate that over 88% of fluvial deposits in the evaluated sedimentary basins are present as DFS, with tributary systems covering a small portion (1-12%) of the basin. These geomorphic elements are commonly arranged hierarchically, with the largest transverse rivers forming large DFS and smaller transverse streams depositing smaller DFS in the areas between the larger DFS. These smaller streams commonly converge between the large DFS, forming a tributary system. Ultimately, most transverse rivers become tributary to the axial system in the sedimentary basin, with the axial system being confined between transverse DFS entering the basin from opposite sides of the basin, or a transverse DFS and the edge of the sedimentary basin. If axial systems are not confined by transverse DFS, they will form a DFS. Many of the world's largest rivers are located in the axial position of some sedimentary basins. Assuming uniformitarianism, sedimentary basins from the past most likely had a similar configuration of geomorphic elements. Facies distributions in tributary positions and those on DFS appear to display specific morphologic patterns. Tributary rivers tend to increase in size in the downstream direction. Because axial tributary rivers are present in confined settings in the sedimentary basin, they migrate back and forth within a relatively narrow belt (relative to the overall size of the sedimentary basin). Thus, axial tributary rivers tend to display amalgamated channel belt form with minimal preservation potential of floodplain deposits. Chute and neck cutoff avulsions are also common on meandering rivers in these settings. Where rivers on DFS exit their confining valley on the basin margin, sediment transport capacity is reduced and sediment deposition occurs resulting in development of a 'valley exit' nodal avulsion point that defines the DFS apex. Rivers may incise downstream of the basin margin valley because of changes in sediment supply and discharge through climatic variability or tectonic processes. We demonstrate that rivers on DFS commonly decrease in width down-DFS caused by infiltration, bifurcation, and evaporation. In proximal areas, channel sands are amalgamated through repeated avulsion, reoccupation of previous channel belts, and limited accumulation space. When rivers flood on the medial to distal portions of a DFS, the floodwaters spread across a large area on the DFS surface and typically do not re-enter the main channel. In these distal areas, rivers on DFS commonly avulse, leaving a discrete sand body and providing high preservation potential for floodplain deposits. Additional work is needed to evaluate the geomorphic character of modern sedimentary basins in order to construct improved facies models for the continental sedimentary rock record. Specifically, models for avulsion, bifurcation, infiltration, and geomorphic form on DFS are required to better define and subsequently predict facies geometries. Studies of fluvial systems in sedimentary basins are also important for evaluating flood patterns and groundwater distributions for populations in these regions.

Sedimentary facies and environmental ichnology of a ?Permian playa-lake complex in western Argentina

USGS Publications Warehouse

Zhang, G.; Buatois, L.A.; Mangano, M.G.; Acenolaza, F.G.

1998-01-01

A moderately diverse arthropod icnofauna occurs in ?Permian ephemeral lacustrine deposits of the Paganzo Basin that crop out at Bordo Atravesado, Cuesta de Miranda, western Argentina. Sedimentary successions are interpreted as having accumulated in a playa-lake complex. Deposits include three sedimentary facies: (A) laminated siltstone and mudstone: (B) current-rippled cross-laminated very fine grained sandstone: and (C) climbing and wave-rippled cross-laminated fine-grained sandstone deposited by sheet floods under wave influence in the playa-lake complex. Analysis of facies sequences suggests that repeated vertical facies associations result from transgressive regressive episodes of variable time spans. The Bordo Atravesado ichnofauna includes Cruziana problematica, Diplocraterion isp., cf. Diplopadichnus biformis, Kouphichnium? isp., Merostomichnites aicunai, Mirandaichnium famatinense, Monomorphichnus lineatus, Palaeophyeus tubularis, Umfolozia sinuosa and Umfolozia ef. U. longula. The assemblage is largely dominated by arthropod trackways and represents an example of the Scoyenia ichnofacies. Trace fossils are mostly preserved as hypichnial ridges on the soles of facies C beds, being comparatively rare in facies A and B. Ichnofossil preservation was linked to rapid influx of sand via sheet floods entering into the lake. Four taphonomic variants (types 1-4) are recognized, each determined by substrate consistency and time averaging. Type 1 is recorded by the presence of low density assemblages consisting of poorly defined trackways, which suggests that arthropods crawled in soft, probably slightly subaqueous substrates. Type 2 is represented by low to moderate density suites that include sharply defined trackways commonly associated with mud cracks, suggesting that the tracemakers inhabited a firm, desiccated lacustrine substrate. Type 3 displays features of types 1 and 2 and represents palimpsestic bedding surfaces, resulting from the overprint of terrestrial ichnocoenoses over previously formed softground suites. Type 4 differs from type 2 only in that assemblages display a high density of traces, recorded by numerous superimposed trackways, which suggests a major time gap of subaerial exposure before sheet flood entrance. Therefore, type 4 surfaces are mostly interpreted as track imprinted omission surfaces.

Clastic sedimentary rocks of the Michipicoten Volcanic-sedimentary belt, Wawa, Ontario

NASA Technical Reports Server (NTRS)

Ojakangas, R. W.

1983-01-01

The Wawa area, part of the Michipicoten greenstone belt, contains rock assemblages representative of volcanic sedimentary accumulations elsewhere on the shield. Three mafic to felsic metavolcanic sequences and cogenetic granitic rocks range in age from 2749 + or - 2Ma to 2696 + or - 2Ma. Metasedimentary rocks occur between the metavolcanic sequences. The total thickness of the supracrustal rocks may be 10,000 m. Most rocks have been metamorphosed under greenschist conditions. The belt has been studied earlier and is currently being remapped by Sage. The sedimentrologic work has been briefly summarized; two mainfacies associations of clastic sedimentary rocks are present - a Resedimented (Turbidite) Facies Association and a Nonmarine (Alluvial Fan Fluvial) Facies Association.

Sequence stratigraphy and sedimentary study on Mishrif formation of Fauqi Oilfield of Missan in south east Iraq

NASA Astrophysics Data System (ADS)

Sang, Hua; Lin, Changsong; Jiang, Yiming

2017-05-01

The reservoir of Mishrif formation has a large scale distribution of marine facies carbonate sediments in great thickness in central and south east Iraq. Rudist reef and shoal facies limestones of the Mishrif Formation (Late Cenomanian - Middle Turonian) form a great potential reservoir rocks at oilfields and structures of Iraq. Facies modelling was applied to predict the relationship between facies distribution and reservoir characteristics to construct a predictive geologic model which will assist future exploration and development in south east Iraq. Microfacies analysis and electrofacies identification and correlations indicate that the limestone of the Mishrif Formation were mainly deposited in open platform setting. Sequence stratigraphic analyses of the Mishrif Formation indicate 3 third order depositional sequences.

Fluvial to Lacustrine Facies Transitions in Gale Crater, Mars

NASA Technical Reports Server (NTRS)

Sumner, Dawn Y.; Williams, Rebecca M. E.; Schieber, Juergen; Palucis, Marisa C.; Oehler, Dorothy Z.; Mangold, Nicolas; Kah, Linda C.; Gupta, Sanjeev; Grotzinger, John P.; Grant, John A., III;

Environmental Transitions Recorded by Fluvial Fan Stratigraphy at Dingo Gap and Moonlight Valley, Gale Crater, Mars

NASA Astrophysics Data System (ADS)

Edgar, L. A.; Gupta, S.; Rubin, D. M.; Schieber, J.; Stack, K.; Lewis, K. W.

2016-12-01

The Mars Science Laboratory (MSL) Curiosity rover investigated a number of sedimentary outcrops across Aeolis Palus. Observations of conglomerates, cross-bedded sandstones, and mudstones suggest that fluvial and lacustrine environments were common. Outcrops that expose cross-sections are particularly helpful for identifying stratigraphic relationships and changes through time. In the vicinity of an outcrop informally named Dingo Gap, the drive strategy shifted from driving on the topographic high areas to the topographic low areas, which resulted in a unique vantage point to observe stratigraphy in cross-section. During Sols 513-541, Curiosity investigated 4 m of stratigraphy exposed at Dingo Gap and Moonlight Valley. The valley walls reveal five distinct sedimentary facies, including 1) a fine-grained evenly laminated facies interpreted as upper plane bed stratification, 2) ripple and dune cross-stratified sandstone facies, interpreted to represent the southward migration of subaqueous bedforms, 3) fully preserved bedform sandstone facies, formed during high rates of deposition, 4) planar-bedded granule-rich sandstone facies, interpreted as sheet flood deposits, and 5) a weakly stratified, poorly-sorted conglomerate facies, interpreted to represent rapid deposition from a high-energy fluvial flow. The conglomerate facies is unlike other conglomerates observed thus far in the mission, on the basis of both texture and chemistry. Analysis of conglomerates reveal that they occur as distinct channel bodies, incised into cross-stratified sandstones. This coarsening upward signature is interpreted to record a prograding fan succession. Channel bodies appear to be time-equivalent, which suggests a major change in the system, likely associated with a drop in base level. The unique viewing geometry offered by Dingo Gap and Moonlight Valley makes it possible to observe these environmental changes.

Depositional response to seagrass mortality along a low-energy, barrier-island coast: west-central Florida

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, M.W.; Hine, A.C.; David, R.A.

1985-01-01

Analysis of aerial photographs and surficial sediment samples from the northern islands of the west-central barrier system of Florida indicates that: (1) seagrass beds in the nearshore zone have controlled onshore/longshore sand transport, and (2) resulting sedimentary accumulations within nearshore seagrass beds make differentiation of nearshore and backbarrier facies difficult. Between 1957 and 1973, an extensive seagrass community occupying the nearshore zone off Anclote Key disappeared, thus allowing the sudden and rapid onshore and longshore transport of sand. The 1000 year old barrier island lengthened 30% by recurved spit growth in this very short period of time. Although there aremore » not direct observations, four possible causes of seagrass mortality have been postulated, and of these overgrazing as a result of the accelerated population growth of sea urchins (Lytechinus variegatus) seems to be the most likely cause. Because of the ability of seagrasses to trap fine-grained sediments, contribute organic matter, and provide for low-energy, sheltered, molluscan biocoenosis, there is little depositional difference between these nearshore and backbarrier/lagoonal facies. This work indicates that the development and destruction of benthic floral communities should be considered as a process that generates or accentuates episodicity/cyclicity in the sedimentary record. Additionally, such changes in these communities should be expected to present a blurred distinction between certain types of coastal sedimentary facies.« less

ChemCam results from the Shaler outcrop in Gale crater, Mars

USGS Publications Warehouse

Anderson, Ryan B.; Bridges, J.C.; Williams, A.; Edgar, L.; Ollila, A.; Williams, J.; Nachon, Marion; Mangold, N.; Fisk, M.; Schieber, J.; Gupta, S.; Dromart, G.; Wiens, R.; Le Mouélic, Stéphane; Forni, O.; Lanza, N.; Mezzacappa, Alissa; Sautter, V.; Blaney, D.; Clark, B.; Clegg, S.; Gasnault, O.; Lasue, J.; Léveillé, Richard; Lewin, E.; Lewis, K.W.; Maurice, S.; Newsom, H.; Schwenzer, S.P.; Vaniman, D.

2015-01-01

The ChemCam campaign at the fluvial sedimentary outcrop “Shaler” resulted in observations of 28 non-soil targets, 26 of which included active laser induced breakdown spectroscopy (LIBS), and all of which included Remote Micro-Imager (RMI) images. The Shaler outcrop can be divided into seven facies based on grain size, texture, color, resistance to erosion, and sedimentary structures. The ChemCam observations cover Facies 3 through 7. For all targets, the majority of the grains were below the limit of the RMI resolution, but many targets had a portion of resolvable grains coarser than ∼0.5 mm. The Shaler facies show significant scatter in LIBS spectra and compositions from point to point, but several key compositional trends are apparent, most notably in the average K2O content of the observed facies. Facies 3 is lower in K2O than the other facies and is similar in composition to the “snake,” a clastic dike that occurs lower in the Yellowknife Bay stratigraphic section. Facies 7 is enriched in K2O relative to the other facies and shows some compositional and textural similarities to float rocks near Yellowknife Bay. The remaining facies (4, 5, and 6) are similar in composition to the Sheepbed and Gillespie Lake members, although the Shaler facies have slightly elevated K2O and FeOT. Several analysis points within Shaler suggest the presence of feldspars, though these points have excess FeOT which suggests the presence of Fe oxide cement or inclusions. The majority of LIBS analyses have compositions which indicate that they are mixtures of pyroxene and feldspar. The Shaler feldspathic compositions are more alkaline than typical feldspars from shergottites, suggesting an alkaline basaltic source region, particularly for the K2O-enriched Facies 7. Apart from possible iron-oxide cement, there is little evidence for chemical alteration at Shaler, although calcium-sulfate veins comparable to those observed lower in the stratigraphic section are present. The differing compositions, and inferred provenances at Shaler, suggest compositionally heterogeneous terrain in the Gale crater rim and surroundings, and intermittent periods of deposition.

Tectono-sedimentary analysis using the anisotropy of magnetic susceptibility: a study of the terrestrial and freshwater Neogene of the Orava Basin

NASA Astrophysics Data System (ADS)

Łoziński, Maciej; Ziółkowski, Piotr; Wysocka, Anna

2017-10-01

The Orava Basin is an intramontane depression filled with presumably fine-grained sediments deposited in river, floodplain, swamp and lake settings. The basin infilling constitutes a crucial record of the neoalpine evolution of the Inner/Outer Carpathian boundary area since the Neogene, when the Jurassic-Paleogene basement became consolidated, uplifted and eroded. The combination of sedimentological and structural studies with anisotropy of magnetic susceptibility (AMS) measurements provided an effective tool for recognition of terrestrial environments and deformations of the basin infilling. The lithofacies-oriented sampling and statistical approach to the large dataset of AMS specimens were utilized to define 12 AMS facies based on anisotropy degree (P) and shape (T). The AMS facies allowed a distinction of sedimentary facies ambiguous for classical methods, especially floodplain and lacustrine sediments, as well as revealing their various vulnerabilities to tectonic modification of AMS. A spatial analysis of facies showed that tuffites along with lacustrine and swamp deposits were generally restricted to marginal and southern parts of the basin. Significant deformations were noticed at basin margins and within two intrabasinal tectonic zones, which indicated the tectonic activity of the Pieniny Klippen Belt after the Middle Miocene. The large southern area of the basin recorded consistent N-NE trending compression during basin inversion. This regional tectonic rearrangement resulted in a partial removal of the southernmost basin deposits and shaped the basin's present-day extent.

Sedimentary and chemostratigraphic record of climatic cycles in Lower Pliensbachian marl-limestone platform successions of Asturias (North Spain)

NASA Astrophysics Data System (ADS)

Bádenas, Beatriz; Aurell, Marc; Armendáriz, Maider; Rosales, Idoia; García-Ramos, José Carlos; Piñuela, Laura

2012-12-01

A combined sedimentological, lithological and chemostratigraphical (Mg/Ca, δ13C, δ18O) analysis of the Lower Pliensbachian marl-limestone platform successions exposed along the Asturias coastline (northern Spain) has resulted in the characterization of high-frequency cycles. The highest-order sedimentary cycles (i.e. elementary cycles) are centimeter- to deciemeter-thick alternations of bioclastic and muddy laminated/burrowed facies, which do not match the marl-limestone couplets. They encompass three sedimentary stages: deposition from storm-density currents (bioclastic facies), dominant lateral advection of continental terrigenous mud accumulated on to an oxygen-deficient seafloor (laminated facies), and recovery of bottom oxygenation involving the burrowing of laminated sediments (burrowed facies). The close match between the number of elementary cycles recorded during the Jamesoni Subzone in Asturias and Yorkshire (Northern England) gives support to the idea of the influence of a regional climatic factor (i.e. millennial-scale cyclicity). Decimeter- to meter-scale cycles formed by bundles of elementary cycles are thought to record orbitally driven climatic changes (precession or obliquity, depending on the time calibration considered). Lower hemicycles of bundles are dominated by marls/calcareous mudstones, with decreasing burrowing and eventual preservation of laminated facies. They formed during humid periods, which controlled an increase in freshwater and terrigenous input to the platform and quasi-estuarine circulation promoting bottom-anoxia. Upper hemicycles of bundles are dominated by burrowed and bioclastic limestones, thought to be formed under arid conditions with anti-estuarine circulation and an increase of shallow carbonate production and offshore resedimentation. Chemostratigraphic data from belemnites recorded in the muddy laminated and burrowed facies indicate that significant concomitant shifts in δ13C and δ18O occurred during the lower hemicycles of bundles (i.e., humid periods). Isotopic shifts are interpreted as reflecting changes in the balance between the proximity of the terrestrial sources, the local incursion of deeper cooler waters, the storage of organic matter within sediments, and the re-cycling of organic matter, due to long-term relative sea-level rise.

Sedimentology of the lower Karoo Supergroup fluvial strata in the Tuli Basin, South Africa

NASA Astrophysics Data System (ADS)

Bordy, Emese M.; Catuneanu, Octavian

2002-11-01

The Karoo Supergroup in the Tuli Basin (South Africa) consists of a sedimentary sequence (˜450-500 m) composed of four stratigraphic units, namely the informal Basal, Middle and Upper Units, and the formal Clarens Formation. The units were deposited in continental settings from approximately Late Carboniferous to Middle Jurassic. This paper focuses on the ˜60-m-thick Basal Unit, which was examined in terms of sedimentary facies and palaeo-environments based on evidence provided by primary sedimentary structures, palaeo-flow measurements, palaeontological findings, borehole data (59 core descriptions) and stratigraphic relations. Three main facies associations have been identified: (i) gravelstone (breccias and conglomerate-breccias), (ii) sandstone and (iii) fine-grained sedimentary rocks. The coarser facies are interpreted as colluvial fan deposits, possibly associated with glaciogenic diamictites. The sandstone facies association is mainly attributed to channel fills of low sinuosity, braided fluvial systems. The coal-bearing finer-grained facies are interpreted as overbank and thaw-lake deposits, and represent the lower energy correlatives of the sandy channel fills. Sediment aggradation in this fluvio-lacustrine system took place under cold climatic conditions, with floating lake ice likely associated with lacustrine environments. Palaeo-current indicators suggest that the highly weathered, quartz-vein-rich metamorphic rock source of the Basal Unit was situated east-northeast of the study area. The accumulation of the Basal Unit took place within the back-bulge depozone of the Karoo foreland system. In addition to flexural subsidence, the amount of accommodation in this tectonic setting was also possibly modified by extensional tectonism in the later stages of the basin development. Based on sedimentological and biostratigraphic evidence, the coal-bearing fine-grained facies association displays strong similarities with the Vryheid Formation of the main Karoo Basin to the south. The lowermost non-fossiliferous breccias have been correlated before with the Dwyka Group in the main Karoo, and hence the Basal Unit may be regarded as the distal equivalent of the Dwyka and Ecca groups to the south.

Sedimentology of rocky shorelines: 1. A review of the problem, with analytical methods, and insights gained from the Hulopoe Gravel and the modern rocky shoreline of Lanai, Hawaii

NASA Astrophysics Data System (ADS)

Felton, E. Anne

2002-10-01

Hypotheses advanced concerning the origin of the Pleistocene Hulopoe Gravel on Lanai include mega-tsunami, abandoned beach, 'multiple event,' rocky shoreline, and for parts of the deposit, Native Hawaiian constructions and degraded lava flow fronts. Uplift of Lanai shorelines has been suggested for deposits occurring up to at least 190 m. These conflicting hypotheses highlight problems with the interpretation of coarse gravel deposits containing marine biotic remains. The geological records of the processes implied by these hypotheses should look very different. Discrimination among these or any other hypotheses for the origins of the Hulopoe Gravel will require careful study of vertical and lateral variations in litho- and biofacies, facies architecture, contact relationships and stratal geometries of this deposit. Observations of modern rocky shorelines, particularly on Lanai adjacent to Hulopoe Gravel outcrops, have shown that distinctive coarse gravel facies are present, several of which occur in specific geomorphic settings. Tectonic, isostatic and eustatic changes which cause rapid shoreline translations on steep slopes favour preservation of former rocky shorelines and associated sedimentary deposits both above and below sea level. The sedimentary record of those shorelines is likely to be complex. The modern rocky shoreline sedimentary environment is a hostile one, largely neglected by sedimentologists. A range of high-energy processes characterize these shorelines. Long-period swell, tsunami and storm waves can erode hard bedrock and generate coarse gravel. They also erode older deposits, depositing fresh ones containing mixtures of materials of different ages. Additional gravelly material may be contributed by rivers draining steep hinterlands. To fully evaluate rocky shoreline deposition in the broadest sense, for both the Hulopoe Gravel and other deposits, sedimentary facies models are needed for rocky shorelines occurring in a range of settings. Recognition and description of rocky shoreline deposits are crucial for correctly interpreting the geological history of oceanic and volcanic arc islands, for distinguishing between ancient tsunami and storm deposits, and for interpreting coarse-grained deposits preserved on high energy coasts of continents. Problems include not only the absence of appropriate sedimentary facies models linking rocky shoreline deposits and environments but also, until recently, lack of a systematic descriptive scheme applicable to coarse gravel deposits generally. Two complementary methods serve to integrate the wide range of bed and clast attributes and parameters which characterize complex coarse gravel deposits. The composition and fabric (CAF) method has a materials focus, providing detailed description of attributes of the constituent clasts, petrology, the proportions of gravel, sand and mud, and the ways in which these materials are organized. The sedimentary facies model building (FMB) method emphasizes the organization of a deposit on a bed-by-bed basis to identify facies and infer depositional processes. The systematic use of a comprehensive gravel fabric and petrography log (GFPL), in conjunction with detailed vertical profiles, provides visual representations of a range of deposit characteristics. Criteria useful for distinguishing sedimentary facies in the Hulopoe Gravel are: grain-size modes, amount of matrix, bed geometry, sedimentary structures, bed fabric and clast roundness.

High-Resolution Subsurface Imaging and Stratigraphy of Quaternary Deposits, Marapanim Estuary, Northern Brazil

NASA Astrophysics Data System (ADS)

Silva, C. A.; Souza Filho, P. M.; Gouvea Luiz, J.

2007-05-01

The Marapanim estuary is situated in the Para Coastal Plain, North Brazil. It is characterized by an embayed coastline developed on Neogene and Quaternary sediments of the Barreiras and Pos-Barreiras Group. This system is strongly influenced by macrotidal regimes with semidiurnal tides and by humid tropical climate conditions. The interpretation of GPR-reflections presented in this paper is based on correlation of the GPR signal with stratigraphic data acquired on the coastal plain through five cores that were taken along GPR survey lines from the recent deposits and outcrops observed along to the coastal area. The profiles were obtained using a Geophysical Survey Systems Inc., Model YR-2 GPR, with monostatic 700 MHz antenna that permitted to get records of subsurface deposits at 20m depth. Were collected 54 radar sections completing a total of 4.360m. The field data were analyzed using a RADAN software and applying different filters. The interpretation of radar facies following the principles of seismic stratigraphy that permitted analyze the sedimentary facies and facies architecture in order to understand the lithology, depositional environments and stratigraphic evolution of this sedimentary succession as well as to leading to a more precise stratigraphic framework for the Neogene to Quaternary deposits at Marapanim coastal plain. Facies characteristics and sedimentologic analysis (i.e., texture, composition and structure aspects) were investigated from five cores collected through a Rammkernsonde system. The locations were determined using a Global Positioning System. Remote sensing images (Landsat-7 ETM+ and RADARSAT-1 Wide) and SRTM elevation data were used to identify and define the distribution of the different morphologic units. The Coastal Plain extends west-east of the mouth of the Marapanim River, where were identified six morphologic units: paleodune, strand plain, recent coastal dune, macrotidal sandy beach, mangrove and salt marsh. The integration of GPR profiles and stratigraphy data allowed for the recognition of paleochannel geometry, with width of 150m and depth of 20m, developed on Barreiras Group, two discontinuity surfaces and three facies associations organized into sedimentary facies: (i) Tidal channel with mottled sand, Conglomerate with clay pebble and Ophiomorpha/linear Skolithos, channel-fill and tabular cross-bedding sand and sand/mud interlayer facies. (ii) Dune/interdune with wavy bedding and cross-bedding sand and planar bedding and tabular cross-bedding sand facies. (iii) infilled tidal channel with mottled sand, planar/flaser bedding sand, lenticular bedding clay and sand/mud interlayer facies. The present study demonstrates that some facies associations occur restricts to tidal paleochannels and shows features well preserved that are very important to reconstruction of the relative sea-level history in the Marapanim Estuary.

Change in Sediment Provenance Near the Current Estuary of Yellow River Since the Holocene Transgression

NASA Astrophysics Data System (ADS)

Song, Sheng; Feng, Xiuli; Li, Guogang; Liu, Xiao; Xiao, Xiao; Feng, Li

2018-06-01

Sedimentary sequence and sediment provenance are important factors when it comes to the studies on marine sedimentation. This paper studies grain size distribution, lithological characteristics, major and rare earth elemental compositions, micropaleontological features and 14C ages in order to examine sedimentary sequence and sediment provenance of the core BH6 drilled at the mouth of the Yellow River in Bohai Sea. According to the grain size and the micropaleontological compositions, 4 sedimentary units have been identified. Unit 1 (0-8.08 mbsf) is of the delta sedimentary facies, Unit 2 (8.08-12.08 mbsf) is of the neritic shelf facies, Unit 3 (12.08-23.85 mbsf) is of near-estuary beach-tidal facies, and Unit 4 (23.85 mbsf-) is of the continental lake facies. The deposits from Unit 1 to Unit 3 have been found to be marine strata formed after the Holocene transgression at about 10 ka BP, while Unit 4 is continental lacustrine deposit formed before 10 ka BP. The provenances of core BH6 sediments show properties of the continental crust and vary in different sedimentary periods. For Unit 4 sediments, the source regions are dispersed while the main provenance is not clear, although the parent rock characteristics of a few samples are similar to the Luanhe River sediments. For Unit 3, sediments at 21.1-23.85 mbsf have been mainly transported from the Liaohe River, while sediments above 21.1 mbsf are mainly from the Yellow River and partially from the Liaohe River. For Unit 2, the sediments have been mainly transported from the Yellow River, with a small amount from other rivers. For Unit 1, the provenance is mainly the Yellow River catchment. These results help in better understanding the evolution of the Yellow River Delta.

Diverse microbially induced sedimentary structures from 1 Ga lakes of the Diabaig Formation, Torridon Group, northwest Scotland

NASA Astrophysics Data System (ADS)

Callow, Richard H. T.; Battison, Leila; Brasier, Martin D.

2011-08-01

The siliciclastic lacustrine rocks of the ~ 1000 Ma Diabaig Formation, northwest Scotland, contain a remarkable diversity of macroscopic structures on bedding planes that can be compared with various kinds of microbially induced sedimentary structures (MISS). Field sedimentological investigations, combined with laboratory analysis of bedding planes and petrographic study of thin sections have allowed us to characterise a range of depositional environments and document the spectrum of biological structures. MISS are reported from frequently subaerial environments, through commonly submerged facies, and down to permanently sub-wavebase settings. Palaeoenvironmental conditions (water depth, exposure, hydrodynamic energy) control the distribution of MISS within these facies. This demonstrates that mat-forming microbial communities were arguably well adapted to low light levels or periodic exposure. Some MISS from the Diabaig Formation are typical of Precambrian microbial mats, including reticulate fabrics and 'old elephant skin' textures. In addition to these, a number of new and unusual fabrics of putative microbial origin are described, including linear arrays of ridges and grooves (cf. 'Arumberia') and discoidal structures that are comparable with younger Ediacaran fossils such as Beltanelliformis. These observations indicate that benthic microbial ecosystems were thriving in freshwater lake systems ~ 1000 Ma, and indicate how microbially induced sedimentary structures may be applied as facies indicators for Proterozoic lacustrine environments. The discovery of structures closely resembling Ediacaran fossils (cf. Beltanelliformis) also serves to highlight the difficulty of interpreting simple discoidal bedding plane structures as metazoan fossils.

A Facies Model for Temperate Continental Glaciers.

ERIC Educational Resources Information Center

Ashley, Gail Mowry

1987-01-01

Discusses the presence and dynamics of continental glaciers in the domination of the physical processes of erosion and deposition in the mid-latitudes during the Pleistocene period. Describes the use of a sedimentary facies model as a guide to recognizing ancient temperate continental glacial deposits. (TW)

Seismic facies analysis of shallowly buried channels, New Jersey continental shelf: understanding late Quaternary paleoenvironments during the last transgression

NASA Astrophysics Data System (ADS)

Nordfjord, S.; Goff, J. A.; Austin, J. A.; Gulick, S. P.; Sommerfield, C.; Alexander, C.; Schock, S.

2004-12-01

We are investigating the late Quaternary sedimentary record of the New Jersey mid-outer continental shelf using deep-towed chirp sonar (1-4 kHz and 1-15 kHz) profiles, coupled with lithologic and chronostratigraphic control from long sediment cores collected using the DOSECC AHC-800 drilling system. We have seismically mapped extensive, shallowly buried, dendritic drainage systems. Observed seismic facies distributions suggest the complex nature of channel fills, and synthetic seismograms derived from MST logs enable us to correlate the chirp data to changes in lithology and physical properties of the cored samples, including channel fills, confirming that fine-grained material is transparent seismically, while interbedded sand and mud produce laminated reflections. We suggest that these channels probably formed during shelfal exposure coincident with the last glacial lowstand along this margin. Observed seismic facies superposition within valley fills is in part consistent with a tripartite zonation derived from wave-dominated estuary models. We have mapped four main facies within these dendritic incised valleys: (1) The lower facies, SF1, consists of a high-amplitude chaotic configuration. We interpret this facies as lowstand fluvial fill; (2) Overlying facies SF2 is generally a thin layer (<1-2m) of stratified, high amplitude reflectors in valley axes. This facies is characterized by small wedges along channel flanks, with a generally transparent acoustic response, but occasionally also by internal clinoforms. This facies could have been deposited as transgression began, by backfilling of valleys (bayhead delta? aggradational alluvial deposits?); (3) SF3 is generally transparent; subtle horizontal and parallel reflectors onlap channel flanks. We interpret this facies as representing central basin/bay deposits, a low-energy zones during the transgression, perhaps related to turbidity maxima; (4) SF4 is observed only in the seaward end of the valley. This facies is more variable in amplitude and configuration, and includes a laminated acoustic response, small erosional surfaces, and some wavy reflections. We think the complexity of this facies likely reflects deposition of an estuary mouth complex in a dynamic environment, including frequent lateral variations in sedimentary facies from tidal inlets, washovers, tidal-deltas and barriers. A seismic transition upward from chaotic to flat-lying reflections and a more transparent acoustic response indicates less depositional energy, suggesting replacement of fluvial systems by tidal/estuarine environments. This has been confirmed by vibra-coring of one channel. Our paleo-flow reconstructions also yield velocities in the range of 0.5-1.5 m/s, which are reasonable estimates for flows in estuarine environments.

A method to generate small-scale, high-resolution sedimentary bedform architecture models representing realistic geologic facies

DOE PAGES

Meckel, T. A.; Trevisan, L.; Krishnamurthy, P. G.

2017-08-23

Small-scale (mm to m) sedimentary structures (e.g. ripple lamination, cross-bedding) have received a great deal of attention in sedimentary geology. The influence of depositional heterogeneity on subsurface fluid flow is now widely recognized, but incorporating these features in physically-rational bedform models at various scales remains problematic. The current investigation expands the capability of an existing set of open-source codes, allowing generation of high-resolution 3D bedform architecture models. The implemented modifications enable the generation of 3D digital models consisting of laminae and matrix (binary field) with characteristic depositional architecture. The binary model is then populated with petrophysical properties using a texturalmore » approach for additional analysis such as statistical characterization, property upscaling, and single and multiphase fluid flow simulation. One example binary model with corresponding threshold capillary pressure field and the scripts used to generate them are provided, but the approach can be used to generate dozens of previously documented common facies models and a variety of property assignments. An application using the example model is presented simulating buoyant fluid (CO 2) migration and resulting saturation distribution.« less

A method to generate small-scale, high-resolution sedimentary bedform architecture models representing realistic geologic facies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meckel, T. A.; Trevisan, L.; Krishnamurthy, P. G.

Small-scale (mm to m) sedimentary structures (e.g. ripple lamination, cross-bedding) have received a great deal of attention in sedimentary geology. The influence of depositional heterogeneity on subsurface fluid flow is now widely recognized, but incorporating these features in physically-rational bedform models at various scales remains problematic. The current investigation expands the capability of an existing set of open-source codes, allowing generation of high-resolution 3D bedform architecture models. The implemented modifications enable the generation of 3D digital models consisting of laminae and matrix (binary field) with characteristic depositional architecture. The binary model is then populated with petrophysical properties using a texturalmore » approach for additional analysis such as statistical characterization, property upscaling, and single and multiphase fluid flow simulation. One example binary model with corresponding threshold capillary pressure field and the scripts used to generate them are provided, but the approach can be used to generate dozens of previously documented common facies models and a variety of property assignments. An application using the example model is presented simulating buoyant fluid (CO 2) migration and resulting saturation distribution.« less

Recent sedimentological studies of the Murray and Stimson formations and their implications for Gale crater evolution, Mars

NASA Astrophysics Data System (ADS)

Gupta, Sanjeev; Fedo, Chris; Grotzinger, John; Edgett, Ken; Vasavada, Ashwin

2017-04-01

The Mars Science Laboratory (MSL) Curiosity rover has been exploring sedimentary rocks on the lower north slope of Aeolis Mons since August 2014. Previous work has demonstrated a succession of sedimentary rock types deposited dominantly in river-delta settings (Bradbury group), and interfingering/overlying contemporaneous/younger lake settings (Murray formation, Mt. Sharp group). The Murray formation is unconformably overlain by the Stimson formation, an ancient aeolian sand lithology. Here, we describe the MSL team's most recent sedimentological findings regarding the Murray and Stimson formations. The Murray formation is of the order of 200 meters thick and formed dominantly of mudstones. The mudstone facies, originally identified at the Pahrump Hills field site, show abundant fine-scale planar laminations throughout the Murray formation succession and is interpreted to record deposition in an ancient lake system in Gale crater. Since leaving the Naukluft Plateau (Stimson formation rocks) and driving south-southeastwards and progressive stratigraphically upwards through the Murray succession, we have recognised a variety of additional facies have been recognized that indicate variability in the overall palaeoenvironmental setting. These facies include (1) cross-bedded siltstones to very fine-grained sandstones with metre-scale troughs that might represent aeolian sedimentation; (2) a heterolithic mudstone-sandstone facies with laminated fine-grained strata, cm-scale ripple cross-laminations in siltstone or very fine sandstone, and dm-scale cross-stratified siltstone and very fine grained sandstone. The palaeoenvironmental setting for the second facies remains under discussion. Our results show that Gale crater hosted lakes systems for millions to tens of millions of years, perhaps punctuated by drier intervals. Murray strata are unconformably overlain by the Stimson formation. Stimson outcrops are typically characterized by cross-bedded sandstones with cross-sets ranging between 40-80 cm thick (Fig. 2). Within the sets, cross-strata comprise repetitive laminations that are a few millimeters thick and typically sub-parallel. Cross-laminations downlap onto the underlying bounding surface with an asymptotic profile and are truncated at their top by an overlying bounding surface. Palaeocurrent analysis based on measurements of 117 foreset azimuths indicate a wind regime that drove dune migration towards the northeast. Cross sets are separated by erosional bounding surfaces, which are interpreted to represent interdune surfaces, which were formed by migrating dunes as they climbed over the stoss slope of a preceding dune, eroding its stoss and upper part of the lee slope. From analysis of the sedimentary architecture, and comparison with terrestrial aeolian strata, we interpret the Stimson formation to represent sands deposited in a dry-aeolian dune system. In summary, sedimentary observations by the Curiosity rover record a diverse range of palaeoenvironments and a rich geological history in strata preserved in lower Aeolis Mons.

Crustal uplifting rate associated with late-Holocene glacial-isostatic rebound at Skallen and Skarvsnes, Lützow-Holm Bay, East Antarctica: evidence of a synchrony in sedimentary and biological facies on geological setting

NASA Astrophysics Data System (ADS)

Takano, Y.; Yokoyama, Y.; Tyler, J. J.; Kojima, H.; Fukui, M.; Sato, T.; Ogawa, N. O.; Suzuki, N.; Kitazato, H.; Ohkouchi, N.

2010-06-01

We determined the mean crustal uplifting rate during the late Holocene along the Soya Coast, Lützow-Holm Bay, East Antarctica, by dating a marine-lacustrine transition recorded in lake sediments. We focused on temporal variations in the chemical composition of sediments recovered from Lake Skallen Oike at Skallen and Lake Oyako at Skarvsnes. Both sets of lake sediments record environmental changes associated with a transition from marine to lacustrine (fresh water) settings, as indicated by analyses of sedimentary facies for carbon and nitrogen contents, nitrogen isotopic compositions (15N/14N), and major element concentrations. Changes in the dominant primary producers during the marine-lacustrine transition were also clearly revealed by biogenic Opal-A, diatom assemblages, and gradient gel electrophoresis (DGGE) with 16S rRNA gene analysis. Geochronology based on radiocarbon dating of acid-insoluble organic carbon suggested that the environmental transition from saline to fresh water occurred at 2940±100 cal yr BP at L. Skallen and 1060±90 cal yr BP at L. Oyako. Based on these data and a linear approximation model, we estimated a mean crustal uplifting rate of 3.6 mm yr-1 for the period since the marine-lacustrine transition via brackish condition; this uplift is attributed to glacial-isostatic rebound along the Soya Coast. The geological setting was the primary factor in controlling the emergence event and the occurrence of simultaneous changes in sedimentary and biological facies along the zone of crustal uplift.

The Totumo mud volcano and its near-shore marine sedimentological setting (North Colombia) - From sedimentary volcanism to epithermal mineralization

NASA Astrophysics Data System (ADS)

Dill, H. G.; Kaufhold, S.

2018-04-01

The Holocene mud volcano exposed at Totumo (younger than 4150 ± 50 yr BP) lines up together with some other landforms of its kind along the Caribbean Coast in northern Colombia. It currently vents a mud of the silicate-phosphate-bearing sulfur-sodium chloride type. The mud volcanoes evolved in an active continental margin setting of the South American Cordillera with high seismicity and affected by pervasive neotectonic structural disturbances. During the Neogene and Quaternary linear terrigenous shoreline sediments alternating with delta deposits evolved on this mobile crustal segment between the Andes and ancient Precambrian cratons. Meso- to microtidal sedimentary settings during transgression and progradation created meta- to instable sedimentary and petrophysical conditions (e.g. overpressure and gas-bearing bubble sands), favorable for the formation of mud volcanoes, whose lithofacies is subdivided into (1) footwall facies (detritus from metabasic, -pelitic source rocks), (2) mud volcano plus lateral facies (material from deep-seated hydrothermal sources, hydrocarbon plays, and brine reflux from the sea), (3) hanging wall facies, sand characterized by a strong longshore drift. The sedimentary volcanism in the area is characterized by different temperatures of formation: (1) pre-stage (<100 °C) and (2) recent stage (≈25 °C). Heavy (pyroxene, amphibole, epidote-clinozoisite, Fe-Ti silicates and oxides, garnet, alumosilicates, tourmaline, zircon, barite, Fe sulfides and -sulfates), light (Ca sulfates, calcite, quartz, feldspar) and clay minerals (kaolinite, mica, pyrophyllite, chlorite, vermiculite) are efficient tools to determine the source of mud, to subdivide the mud volcano system as to its facies and describe its physical-chemical regime as to the temperature of formation, pH and Eh values. The mud volcano system of Totumo bridges the gap between sedimentary "volcanism" and epithermal hot spring deposits of intermediate to high sulfidation and forms a useful "guide" to hydrocarbon accumulation.

Petrologic and zircon U-Pb geochronological characteristics of the pelitic granulites from the Badu Complex of the Cathaysia Block, South China

NASA Astrophysics Data System (ADS)

Zhao, Lei; Zhou, Xiwen; Zhai, Mingguo; Liu, Bo; Cui, Xiahong

2018-06-01

The recognition of the Indosinian Orogeny in the South China block has been controversial and difficult because of strong weathering and thick cover. High temperature (HT) and high pressure (HP) metamorphic rocks related to this orogeny were considered to be absent from this orogenic belt until the recent discovery of eclogite and granulite facies meta-igneous rocks, occurring as lenses within the meta-sedimentary rocks of the Badu Complex. However, metamorphic state of these meta-sedimentary rocks is still not clear. Besides, there have been no geochronological data of HT pelitic granulites previously reported from the Badu Complex. This paper presents petrographic characteristics and zircon geochronological results on the newly discovered kyanite garnet gneiss, pyroxene garnet gneiss and the HT pelitic granulites (sillimanite garnet gneiss). Mineral assemblages are garnet + sillimanite + ternary feldspar + plagioclase + quartz + biotite for the HT pelitic granulite, kyanite + ternary feldspar + garnet + sillimanite + plagioclase + quartz + biotite for the kyanite garnet gneiss, and garnet + biotite + pyroxene + plagioclase + ternary feldspar + quartz for the pyroxene garnet gneiss, respectively. Decompressional coronas around garnet grains can be observed in all these pelitic rocks. Typical granulite facies mineral assemblages and reaction textures suggest that these rocks experienced HP granulite facies metamorphism and overprinted decompression along a clockwise P-T loop. Results from integrated U-Pb dating and REE analysis indicate the growth of metamorphic zircons from depleted heavy REE sources (100-50 chondrite) compared with detrital zircons derived from granitic sources (typically > 1000 chondrite). Metamorphic zircons in HP granulite exhibit no or subdued negative Eu anomalies, which perhaps indicate zircon overgrowth under eclogite facies conditions. The zircon overgrowth ages range from 250 to 235 Ma, suggesting that HP granulite (eclogite) to granulite facies metamorphism of these supracrustal rocks occurred in the Early-Middle Triassic. Based on the presence of HP granulite facies pelitic rocks, it is inferred that significant underthrusting was involved during the Indosinian Orogeny which introduced these supracrustal rocks to lower crustal levels.

Peritidal cyclic sedimentation from La Manga Formation (Oxfordian), Neuquén Basin, Mendoza, Argentina

NASA Astrophysics Data System (ADS)

Palma, Ricardo M.; Kietzmann, Diego A.; Bressan, Graciela S.; Martín-Chivelet, Javier; López-Gómez, José; Farias, María E.; Iglesias Llanos, María P.

2013-11-01

The La Manga Formation consists of marine carbonates and represents most of the sedimentary record of the Callovian-Oxfordian in the Neuquén Basin. Three localities in the southern Mendoza province were studied and their cyclicity was determined by means of facies analysis and their vertical arrangement. Facies of inner ramp, that were deposited in extremely shallow-water environments with intermittent subaerial exposures have been broken down into shallow subtidal, and intertidal-supratidal environments. Shallow subtidal facies are arranged into decimetre scale upward-shallowing cycles composed of marls, laminated or massive mudstones or bioclastic wackestones and intraclastic wackestone-packstones. Intertidal-supratidal centimetre-scale cycles consist of an upward-shallowing succession of restricted facies, overlaid by horizontal or crinkle microbial laminites, flat pebble conglomerates or breccias beds. The defined cycles show a shallowing upward trend in which the evidence of relative sea-level lowering is accepted. The interpretation of Fischer plots allowed the recognition of changes in accommodation space.

Depositional and erosional architectures of gravelly braid bar formed by a flood in the Abe River, central Japan, inferred from a three-dimensional ground-penetrating radar analysis

NASA Astrophysics Data System (ADS)

Okazaki, Hiroko; Kwak, Youngjoo; Tamura, Toru

2015-07-01

We conducted a ground-penetrating radar (GPR) survey of gravelly braid bars in the Abe River, central Japan, to clarify the three-dimensional (3D) variations in their depositional facies under various geomorphologic conditions. In September 2011, a ten-year return-period flood in the study area reworked and deposited braid bars. After the flood, we surveyed three bars with different geomorphologies using a GPR system with a 250-MHz antenna and identified seven fundamental radar depositional facies: Inclined reflections (facies Ia and Ib), horizontal to subhorizontal reflections (facies IIa and IIb), discontinuous reflections (facies IIIa and IIIb), and facies assemblage with a large-scale channel-shaped lower boundary (facies IV). Combinations of these facies indicate bar formation processes: channel filling, lateral aggradation, and lateral and downstream accretion. In the Abe River, aerial photographs and airborne laser scanning data were obtained before and after the flood. The observed changes of the surface topography are consistent with the subsurface results seen in the GPR sections. This study demonstrated that the erosional and depositional architecture observed among bars with different channel styles was related to river width and represented depositional processes for high-sediment discharge. The quantitative characterizations of the sedimentary architecture will be useful for interpreting gravelly fluvial deposits in the rock record.

Facies analysis, palaeoenvironmental reconstruction and stratigraphic development of the Early Cretaceous sediments (Lower Bima Member) in the Yola Sub-basin, Northern Benue Trough, NE Nigeria

NASA Astrophysics Data System (ADS)

Sarki Yandoka, Babangida M.; Abubakar, M. B.; Abdullah, Wan Hasiah; Amir Hassan, M. H.; Adamu, Bappah U.; Jitong, John S.; Aliyu, Abdulkarim H.; Adegoke, Adebanji Kayode

2014-08-01

The Benue Trough of Nigeria is a major rift basin formed from the tension generated by the separation of African and South American plates in the Early Cretaceous. It is geographically sub-divided into Southern, Central and Northern Benue portions. The Northern Benue Trough comprises two sub-basins; the N-S trending Gongola Sub-basin and the E-W trending Yola Sub-basin. The Bima Formation is the oldest lithogenetic unit occupying the base of the Cretaceous successions in the Northern Benue Trough. It is differentiated into three members; the Lower Bima (B1), the Middle Bima (B2) and the Upper Bima (B3). Facies and their stratigraphical distribution analyses were conducted on the Lower Bima Member exposed mainly at the core of the NE-SW axially trending Lamurde Anticline in the Yola Sub-basin, with an objective to interpret the paleodepositional environments, and to reconstruct the depositional model and the stratigraphical architecture. Ten (10) lithofacies were identified on the basis of lithology, grain size, sedimentary structures and paleocurrent analysis. The facies constitute three (3) major facies associations; the gravelly dominated, the sandy dominated and the fine grain dominated. These facies and facies associations were interpreted and three facies successions were recognized; the alluvial-proximal braided river, the braided river and the lacustrine-marginal lacustrine. The stratigraphic architecture indicates a rifted (?pull-apart) origin as the facies distribution shows a progradational succession from a shallow lacustrine/marginal lacustrine (at the axial part of the basin) to alluvial fan (sediment gravity flow)-proximal braided river (gravel bed braided river) and braided river (channel and overbank) depositional systems. The facies stacking patterns depict sedimentation mainly controlled by allogenic factors of climate and tectonism.

Depositional environment of the Onverwacht sedimentary rocks Barberton greenstone belt, South Africa

NASA Astrophysics Data System (ADS)

Paris, I. A.

The Onverwacht Group is the basal part of the ca 3.5 Ga succession forming the Barberton greenstone belt. It comprises a volcanic pile overlain by a thin layer of volcaniclastic sediments which, due to silicification, are extremely well preserved. There has been a controversy as to how and in what environment these sediments were formed, different sets of data being presented to reach opposite conclusions. The Onverwacht Group has been extensively repeated tectonically and here for the first time, sediments from different structural levels are studied together. Three separate facies have been recognised, a distal and proximal turbidite facies and a subaerial facies. Deposition of Onverwacht Group sedimentary rocks occurred in an oceanic basin characterised by the presence of emergent volcanic islands. After eruption, material was deposited both subaerially and in a shallow submarine environment on the volcanic slopes and, as a result of pyroclastic flow, in the deeper parts of the basin.

Modern Pearl River Delta and Permian Huainan coalfield, China: A comparative sedimentary facies study

USGS Publications Warehouse

Suping, P.; Flores, R.M.

1996-01-01

Sedimentary facies types of the Pleistocene deposits of the Modern Pearl River Delta in Guangdong Province, China and Permian Member D deposits in Huainan coalfield in Anhui Province are exemplified by depositional facies of anastomosing fluvial systems. In both study areas, sand/sandstone and mud/mudstone-dominated facies types formed in diverging and converging, coeval fluvial channels laterally juxtaposed with floodplains containing ponds, lakes, and topogenous mires. The mires accumulated thin to thick peat/coal deposits that vary in vertical and lateral distribution between the two study areas. This difference is probably due to attendant sedimentary processes that affected the floodplain environments. The ancestral floodplains of the Modern Pearl River Delta were reworked by combined fluvial and tidal and estuarine processes. In contrast, the floodplains of the Permian Member D were mainly influenced by freshwater fluvial processes. In addition, the thick, laterally extensive coal zones of the Permian Member D may have formed in topogenous mires that developed on abandoned courses of anastomosing fluvial systems. This is typified by Seam 13-1, which is a blanket-like body that thickens to as much as 8 in but also splits into thinner beds. This seam overlies deposits of diverging and converging, coeval fluvial channels of the Sandstone D, and associated overbank-floodplain deposits. The limited areal extent of lenticular Pleistocene peat deposits of the Modern Pearl River Delta is due to their primary accumulation in topogenous mires in the central floodplains that were restricted by contemporaneous anastomosing channels.

Anatomy of the grainstone shoal facies of the Salem Limestone (Mississippian) of southern Indiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dodd, J.R.; Petzold, D.D.; Thompson, T.A.

In 1990 M.A. Brown described the middle Mississippian (Valmeyeran) Salem Limestone exposed on the eastern side of the Illinois Basin as consisting of a massive grainstone shoal facies behind which developed a sand flat, an open lagoon, and a restricted lagoon facies. Smaller intrashoal channels provided limited exchange between lagoon and open ocean. The authors have made detailed studies of sedimentary structures and petrography of the shoal facies in three settings: the shoal proper, an intrashoal channel, and an intershoal channel. The shoal and channel facies consists of tabular-planar and trough cross-stratified beds of grainstone containing echinoderm and fenestrate bryozoanmore » grains as their primary constituents. Prominent hardgrounds that have up to 1 m of erosional relief occur in two of the sections. Despite the apparent uniformity of composition of the shoal, porosity and especially permeability varies over a wide range, suggesting a range of cementation patterns within the shoal. Most of the cement in the shoal consists of syntaxial overgrowths on echinoderm grains. Cementation is less and thus porosity and permeability greater, in portions of the shoals containing a lower concentration of echinoderm grains and grains with thick micrite envelopes. However, some portions of the intershoal channel facies that contain a high percentage of ooids have reduced porosity and permeability due to crushing of ooids, producing micrite that clogged the pores. Primary sedimentary features of the shoal facies were produced predominantly by storm reworking of carbonate grains produced in situ and perhaps in part washed in from surrounding environments.« less

Recent hydrological variability and extreme precipitation events in Moroccan Middle-Atlas mountains: micro-scale analyses of lacustrine sediments

NASA Astrophysics Data System (ADS)

Jouve, Guillaume; Vidal, Laurence; Adallal, Rachid; Bard, Edouard; Benkaddour, Abdel; Chapron, Emmanuel; Courp, Thierry; Dezileau, Laurent; Hébert, Bertil; Rhoujjati, Ali; Simonneau, Anaelle; Sonzogni, Corinne; Sylvestre, Florence; Tachikawa, Kazuyo; Viry, Elisabeth

2016-04-01

Since the 1990s, the Mediterranean basin undergoes an increase in precipitation events and extreme droughts likely to intensify in the XXI century, and whose origin is attributable to human activities since 1850 (IPCC, 2013). Regional climate models indicate a strengthening of flood episodes at the end of the XXI century in Morocco (Tramblay et al, 2012). To understand recent hydrological and paleohydrological variability in North Africa, our study focuses on the macro- and micro-scale analysis of sedimentary sequences from Lake Azigza (Moroccan Middle Atlas Mountains) covering the last few centuries. This lake is relevant since local site monitoring revealed that lake water table levels were correlated with precipitation regime (Adallal R., PhD Thesis in progress). The aim of our study is to distinguish sedimentary facies characteristic of low and high lake levels, in order to reconstruct past dry and wet periods during the last two hundred years. Here, we present results from sedimentological (lithology, grain size, microstructures under thin sections), geochemical (XRF) and physical (radiography) analyses on short sedimentary cores (64 cm long) taken into the deep basin of Lake Azigza (30 meters water depth). Cores have been dated (radionuclides 210Pb, 137Cs, and 14C dating). Two main facies were distinguished: one organic-rich facies composed of wood fragments, several reworked layers and characterized by Mn peaks; and a second facies composed of terrigenous clastic sediments, without wood nor reworked layers, and characterized by Fe, Ti, Si and K peaks. The first facies is interpreted as a high lake level stand. Indeed, the highest paleoshoreline is close to the vegetation, and steeper banks can increase the current velocity, allowing the transport of wood fragments in case of extreme precipitation events. Mn peaks are interpreted as Mn oxides precipitations under well-oxygenated deep waters after runoff events. The second facies is linked to periods of increased detrital input by incising sediments during low lake levels. This interpretation is supported by chronological jumps in this facies (incoherent old 14C ages). Finally, the presence of numerous anhydrous calcium sulfates in the recent low lake level facies supports the observation of a decreasing lake level for the last decades (Flower et al., 1989; Adallal R., PhD Thesis in progress). Our study demonstrates that several lake level changes occurred during the past two hundred years, and highlights the unprecedented lake level drop since the 1980s. Bibliography Flower, R.J., Stevenson, A.C., Dearing, J.A., Foster, I.D., Airey, A., Rippey, B.,Wilson, J.P.F. & Appleby, P.G. (1989). Catchment disturbance inferred from paleolimnological studies of three contrasted sub-humid environments in Morocco. J Paleolimnol 1: 293-322. IPCC, AR 5. Climate Change (2013). The physical Science Report. Tramblay, Y., Badi, W., Driouech, F., El Adlouni, S., Neppel, L. and Servat, E. 2012. Climate change impacts on extreme precipitation in Morocco. Global and Planetary Change 82-83: 104-114.

Stacking pattern and stratigraphic model of reservoirs from a modern analogue to ancient deltaic and siliciclastic deposits: Golfe du Lion, SE France

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesson, M.; Bernard, G.; Georges, A.

1995-08-01

The {open_quotes}Golfe du Lion{close_quotes} Pleistocene shelf deposits are used as modern analogues of ancient deltaic and shallow water siliciclastic deposits. At least 6 cyclic superimposed sedimentary packages constituting a seaward thickening wedge are documented, including major progradational clinoforms units bounded by regional unconformities, with their updip terminations. Seismic correlations and geometry models, together with age dating and facies analysis of the uppermost units have been used at regional scale. They allowed to differentiate allocyclic from autocyclic events, to improve our knowledge of the nature of tectonic control on architecture, and to rely the different seismic units, inside the packages, tomore » the environmental changes from interglacial highstand to glacial lowstand in 4 to 5th order cycles. An alternative model of {open_quotes}forced regression{close_quotes} during sea level lowstand was documented and validated. The different illustrated sedimentary units, related to specific parts of the relative sea level curve along a short duration/high amplitude cycle, are: (i) the {open_quotes}forced regression{close_quotes} deposits (ii) the late lowstand massive sands onto the outer shelf (iii) the early transgressive backstepping (?) beach sands, (iii) the late transgressive backslapping parasequences. The sand content inferred from the seismic facies, comforted with the uppermost units facies from data cores, is in agreement with this model.« less

Review of Geologic Data Sources for Coastal Sediment Budgets

DTIC Science & Technology

1993-02-01

significant elements of the overall sedimentary environment . Boundaries can, for example, be delineated by headlands, submarine canyons, inlets, stream...Doubleday, Garden City, NY. Biederman, E. W. 1962. "Distinction of Shoreline Environments in New Jersey," Journal of Sedimentary Petrology, Vol 32, pp 181...234. Ingrim, R. L. 1965. " Facies Maps Based on the Megascopic Examination of Modvrn Sediments," Journal of Sedimentary Petrology, Vol 35, No. 3, pp 61W

Astronomical pacing of ecosystem function in the Green River Formation of Utah and Colorado

NASA Astrophysics Data System (ADS)

van Keuren, M. A.; Whiteside, J. H.; Eglinton, T. I.

2008-12-01

Part of one of the largest petroleum reserves in the world, the Green River Formation of the Uinta and Piceance Creek basins of Utah and Colorado, formed in a huge Eocene lake system during the warmest, most equable period in recent Earth history. Despite the unit's great potential economic importance and correspondingly large number of geochemical analyses and the preeminent role of these strata in Milankovitch theory (Bradley, 1929), there are surprisingly few systematic studies of the geochemistry of the characteristic permeating cyclicity. Here, we report multiple proxies of lacustrine ecosystem dynamics including oil shale yields, sedimentary facies, carbon and nitrogen isotopes, and molecule-level carbon isotopes from the most oil-rich parts (including the Mahogany oil shale zone) from a series of cores and outcrops in a transect across the Uinta and Piceance Creek basins spanning ~500 m stratigraphically and 3.2 m.y. temporally. Our initial results show covariation in sedimentary facies, oil shale yield, TOC, C/N ratios, and δ13Corg in the expected Milankovitch periodicities, although significant lateral and vertical changes in accumulation make the relative spectral power in the precessional range rather weak. There are, however, differences in the mode of response with oil shale yield, TOC, and sedimentary facies showing more power in the precessional range, while C/N ratios track the 100 ky cycle. C/N ratios tend to be high through multiple precessional cycles dominated by kerogen derived from microbial organic matter suggesting persistent anoxia and a large resulting pool of hypolimnetic ammonium. This pool was eliminated during low lake stands and C/N values then fluctuate through several precession controlled steps. The δ13Corg record, while showing a signal coherent with that of other proxies, has a rather complicated relationship with other proxies, the analysis of which is in its early stages. Molecule-level δ13Corg analysis of n-alkanes suggests mixing of carbon from different sources of varying isotopic composition, and presents a dramatically different pattern from that seen in published studies of the saline facies of the formation. Based on our results, the Milankovitch cyclostratigraphy of these cores in concert with that from the rest of the Uinta and Piceance basin sections, can provide a basis for a time scale for continental environments and pivotal mammalian evolution during the hot-house Eocene.

The problem of genesis and systematic of sedimentary units of hydrocarbon reservoirs

NASA Astrophysics Data System (ADS)

Zhilina, E. N.; Chernova, O. S.

2017-12-01

The problem of identifying and ranking sedimentation, facies associations and their constituent parts - lithogenetic types of sedimentary rocks was considered. As a basis for paleo-sedimentary modelling, the author has developed a classification for terrigenous natural reservoirs,that for the first time links separate sedimentological units into a single hierarchical system. Hierarchy ranking levels are based on a compilation of global knowledge and experience in sediment geology, sedimentological study and systematization, and data from deep-well coresrepresentingJurassichydrocarbon-bearing formationsof the southeastern margin of the Western Siberian sedimentary basin.

Fine-Grained Turbidites: Facies, Attributes and Process Implications

NASA Astrophysics Data System (ADS)

Stow, Dorrik; Omoniyi, Bayonle

2016-04-01

Within turbidite systems, fine-grained sediments are still the poor relation and sport several contrasting facies models linked to process of deposition. These are volumetrically the dominant facies in deepwater and, from a resource perspective, they form important marginal and tight reservoirs, and have great potential for unconventional shale gas, source rocks and seals. They are also significant hosts of metals and rare earth elements. Based on a large number of studies of modern, ancient and subsurface systems, including 1000s of metres of section logging, we define the principal genetic elements of fine-grained deepwater facies, present a new synthesis of facies models and their sedimentary attributes. The principal architectural elements include: non-channelised slope-aprons, channel-fill, channel levee and overbank, turbidite lobes, mass-transport deposits, contourite drifts, basin sheets and drapes. These comprise a variable intercalation of fine-grained facies - thin-bedded and very thin-bedded turbidites, contourites, hemipelagites and pelagites - and associated coarse-grained facies. Characteristic attributes used to discriminate between these different elements are: facies and facies associations; sand-shale ratio, sand and shale geometry and dimensions, sand connectivity; sediment texture and small-scale sedimentary structures; sediment fabric and microfabric; and small-scale vertical sequences of bed thickness. To some extent, we can relate facies and attribute characteristics to different depositional environments. We identify four distinct facies models: (a) silt-laminated mud turbidites, (b) siliciclastic mud turbidites, (c) carbonate mud turbidites, (d) disorganized silty-mud turbidites, and (e) hemiturbidites. Within the grainsize-velocity matrix turbidite plot, these all fall within the region of mean size < 0.063mm, maximum grainsize (one percentile) <0.2mm, and depositional velocity 0.1-0.5 m/s. Silt-laminated turbidites and many mud turbidites reflect uniform, steady flow characteristics and a depositional sorting mechanism for silt-clay separation; whereas disorganized turbidites reflect an unsteady flow type, either as a short-lived surge or as a mud-contaminated mid-flow. Fine-grained carbonate turbidites show certain distinctive characteristics linked to the different dynamic behaviour of fine carbonate material. Hemiturbidites are the result of long-distance transport and an upward buoyancy mechanism during deposition.

A new reconstruction of the Paleozoic continental margin of southwestern North America: Implications for the nature and timing of continental truncation and the possible role of the Mojave-Sonora megashear

USGS Publications Warehouse

Stevens, C.H.; Stone, P.; Miller, J.S.

2005-01-01

Data bearing on interpretations of the Paleozoic and Mesozoic paleogeography of southwestern North America are important for testing the hypothesis that the Paleozoic miogeocline in this region has been tectonically truncated, and if so, for ascertaining the time of the event and the possible role of the Mojave-Sonora megashear. Here, we present an analysis of existing and new data permitting reconstruction of the Paleozoic continental margin of southwestern North America. Significant new and recent information incorporated into this reconstruction includes (1) spatial distribution of Middle to Upper Devonian continental-margin facies belts, (2) positions of other paleogeographically significant sedimentary boundaries on the Paleozoic continental shelf, (3) distribution of Upper Permian through Upper Triassic plutonic rocks, and (4) evidence that the southern Sierra Nevada and western Mojave Desert are underlain by continental crust. After restoring the geology of western Nevada and California along known and inferred strike-slip faults, we find that the Devonian facies belts and pre-Pennsylvanian sedimentary boundaries define an arcuate, generally south-trending continental margin that appears to be truncated on the southwest. A Pennsylvanian basin, a Permian coral belt, and a belt of Upper Permian to Upper Triassic plutons stretching from Sonora, Mexico, into westernmost central Nevada, cut across the older facies belts, suggesting that truncation of the continental margin occurred in the Pennsylvanian. We postulate that the main truncating structure was a left-lateral transform fault zone that extended from the Mojave-Sonora megashear in northwestern Mexico to the Foothills Suture in California. The Caborca block of northwestern Mexico, where Devonian facies belts and pre-Pennsylvanian sedimentary boundaries like those in California have been identified, is interpreted to represent a missing fragment of the continental margin that underwent ???400 km of left-lateral displacement along this fault zone. If this model is correct, the Mojave-Sonora megashear played a direct role in the Pennsylvanian truncation of the continental margin, and any younger displacement on this fault has been relatively small. ?? 2005 Geological Society of America.

Sedimentation and tectonics in the southern Bida Basin, Nigeria: depositional response to varying tectonic context

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braide, S.P.

1990-05-01

The Upper Cretaceous Bida basin of central Nigeria is sandwiched between the Precambrian schist belts of the Northern Nigerian massif and the West African craton. Of interest is the southern part of the basin, which developed in continental settings, because the facies architecture of the sedimentary fill suggests a close relation between sedimentation dynamics and basin margin tectonics. This relationship is significant to an understanding of the basin's origin, which has been controversial. A simple sag and rift origin has been suggested, and consequently dominated the negative thinking on the hydrocarbon prospects of the basin which were considered poor. Thismore » detailed study of the facies indicates rapid basin-wide changes from various alluvial fan facies through flood-basin and deltaic facies to lacustrine facies. Paleogeographic reconstruction suggests lacustrine environments were widespread and elongate. Lacustrine environments occurred at the basin's axis and close to the margins. This suggests the depocenter must have migrated during the basin's depositional history and subsided rapidly to accommodate the 3.5-km-thick sedimentary fill. Although distinguishing pull-apart basins from rift basins, based solely on sedimentologic grounds, may be difficult, the temporal migration of the depocenter, as well as the basin architecture of upward coarsening cyclicity, show a strong tectonic and structural overprint that suggests a tectonic framework for the Southern Bida basin similar in origin to a pull-apart basin.« less

Tectono-sedimentary constraints to the Oligocene-to-Miocene evolution of the Peloritani thrust belt (NE Sicily)

NASA Astrophysics Data System (ADS)

Giunta, G.; Nigro, F.

1999-12-01

The Peloritani thrust belt belongs to the southern sector of the Calabrian Arc and is formed by a set of south-verging tectonic units, including crystalline basement and sedimentary cover (from the top: Aspromonte U.; Mela U.; Mandanici U.; Fondachelli U.; Longi-Taormina U.), piled up starting from Late Oligocene. At least two main terrigenous clastic formations lie with complicated relationships on top of the previous units: the Frazzanò Fm (Oligocene) and the Stilo-Capo d'Orlando Fm (Late Oligocene?-Early Miocene), as syn-to-post-tectonic deposits. These clastic deposits have different characteristics, in space and time, representing or flysch-like sequences involved in several thrust events (Frazzanò Fm) or molassic-like sequences (Stilo-Capo d'Orlando Fm), which unconformably overlie the tectonic units. In the present paper we describe a kinematic model of the progressive foreland migration of the Peloritani thrust belt, starting from Oligocene, carrying piggy-back basins and incorporating foredeep deposits, recognised in the Frazzanò-Stilo-Capo d'Orlando terrigenous successions. In general, the facies and structural observations on the overall Oligo-Miocene clastic sequences, outcropping in the Western Peloritani Mts, indicate: (a) the distal character of the Frazzanò Fm; (b) a complex group of terrigenous facies of the Stilo-Capo d'Orlando Fm, with lateral-to-vertical organisation, characterised by a distal-to-proximal-to-distal facies trend; (c) facies analogies of the basal portions of the Stilo-Capo d'Orlando Fm with the Frazzanò Fm; (d) the involvement of the Frazzanò Fm in lowermost and more external thrusting, and of the basal (Late Oligocene?) distal Stilo-Capo d'Orlando facies in the higher and inner thrusting during the early stages of deformation; (e) the involvement of the proximal Stilo-Capo d'Orlando facies in the tectonic edifice during the Early Miocene deformation; (f) the generally unconformable stratigraphical contacts of the higher proximal-to-distal (Early Miocene) Stilo-Capo d'Orlando facies on the constructing mobile belt; and (g) the presence of various thrust-faults, distinguished in a sequential order. The collected data allow us to hypothesise that the Oligo-Miocene tectono-sedimentary history was characterised by a foredeep with a deforming internal flank, probably lying in onlap on the constructing tectonic edifice (Frazzanò-lower Stilo-Capo d'Orlando Fms), and then deformed and covered by a piggy-back like sequence (middle-upper Stilo-Capo d'Orlando Fm), which was subsequently also deformed. The tectono-sedimentary evolution of the Peloritani belt has been probably developed through a progressive migration towards the foreland of a foredeep-compressional front couple and the chain body. The thrust stack progressively incorporates terrigenous foredeep deposits and in turn carried piggy-back basins.

Sedimentary Environments Mapping in the Yellow Sea Using TanDEM-X and Optic Satellites

NASA Astrophysics Data System (ADS)

Ryu, J. H.; Lee, Y. K.; Kim, S. W.

2017-12-01

Due to land reclamation and dredging, 57% of China's coastal wetlands have disappeared since the 1950s, and the total area of tidal flats in South Korea decreased from approximately 2,800km2 in 1990 to 2392km2 in 2005(Qiu, 2011 and MLTM, 2010). Intertidal DEM and sedimentary facies are useful for understanding intertidal functions and monitoring their response to natural and anthropogenic actions. Highly accurate intertidal DEMs with 5-m resolution were generated based on the TanDEM-X interferometric SAR (InSAR) technique because TanDEM-X allows the acquisition of the coherent InSAR pairs with no time lag or approximately 10-second temporal baseline between master and slave SAR image. We successfully generated intertidal zone DEMs with 5-7-m spatial resolutions and interferometric height accuracies better than 0.15 m for three representative tidal flats on the west coast of the Korean Peninsula and one site of chinese coastal region in the Yellow Sea. Surface sediment classification based on remotely sensed data must circumspectly consider an effective critical grain size, water content, local topography, and intertidal structures. The earlier studies have some limitation that the classification map is not considered to analysis various environmental conditions. Therefore, the purpose of this study was minutely to mapping the surface sedimentary facies by analyzing the tidal channel, topography with multi-sensor remotely sensed data and in-situ data.

Petroleum geology of the Southern Bida Basin, Nigeria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braide, S.P.

1990-05-01

The Southern Bida basin is located in central Nigeria and is a major sedimentary area with a 3.5-km-thick sedimentary fill. However, it is the least understood of Nigeria's sedimentary basins because serious oil and gas exploration has not been undertaken in the basin. The surrounding Precambrian basement rocks experienced severe deformation during the Late Panafrican phase (600 {plus minus} 150 m.y.), and developed megashears that were reactivated during the Late Campanian-Maestrichtian. The ensuing wrenchfault tectonics formed the basin. The sedimentary fill, which comprises the Lokoja Formation are chiefly, if not wholly, nonmarine clastics. These have been characterized into facies thatmore » rapidly change from basin margin to basin axis, and have undergone only relatively mild tectonic distortion. Subsurface relations of the Lokoja Formation are postulated from outcrop study. The potential source rocks are most likely within the basinal axis fill and have not been deeply buried based on vitrinite reflectance of <0.65%. These findings, with the largely nonmarine depositional environment, suggest gas and condensate are the most likely hydrocarbons. Alluvial fans and deltaic facies that interfinger with lacustrine facies provide excellent reservoir capabilities. Potential traps for hydrocarbon accumulation were formed by a northwest-southeast-trending Campanian-Maestrichtian wrench system with associated northeast-southwest-oriented normal faults. The traps include strata in alluvial fans, fractured uplifted basement blocks, and arched strata over uplifted blocks. However, the size of hydrocarbon accumulations could be limited to some extent by a lack of effective hydrocarbon seal, because the dominant seals in the formation are unconformities.« less

Sedimentary response to halfgraben dipslope faults evolution -Billefjorden Trough, Svalbard.

NASA Astrophysics Data System (ADS)

Smyrak-Sikora, Aleksandra; Kristensen, Jakob B.; Braathen, Alvar; Johannessen, Erik P.; Olaussen, Snorre; Sandal, Geir; Stemmerik, Lars

2017-04-01

Fault growth and linkage into larger segments has profound effect on the sedimentary architecture of rift basins. The uplifted Billefjorden Through located in central Spitsbergen is an excellent example of half-graben basin development. Detailed sedimentological and structural investigations supported by helicopter and ground base lidar scans along with photogrammetry analysis have been used to improve our understanding of the sedimentary response to faulting and along strike variations in footwall uplift and hanging wall subsidence. The early syn-rift basin fill, the Serpukhovian to Bashkirian Hultberget Formation and the Bashkirian Ebbaelven Member consists of fluvial to deltaic sandstones with minor marine incursions. During this early stage tens to hundred- meters-scale syn-tectonic faults disrupted the dipslope, and created local hanging wall depocentres where sediments were arrested. Changes in fluvial drainage pattern, development of small lacustrine basins along the faults, and the sharp based boundaries of some facies associations are interpreted as response to activity along these, mostly antithetic faults. The basin fill of the late syn-rift stage is composed of shallow marine to tidal mixed evaporite -carbonate facies in the hanging wall i.e. the Bashkirian Trikolorfjellet Member and the Moscovian Minkenfjellet Formation. These sediments interfinger with thick alluvial fan deposits outpouring from relay ramps on the master fault i.e. drainage from the footwall. The carbonate-evaporite cycles deposited on the hanging wall responded to both the eustatic sea level variations and tectonic movements in the rift basin. Intra-basinal footwall uplift of the dipslope controlled development of an internal unconformity and resulted in dissolution of the gypsum to produce stratiform breccia. In contrast thick gypsum-rich subbasins are preserved locally in hanging wall positions where they were protected from the erosion. The syn rift basin fill is capped by post rift carbonate ramp deposit of the Kasimovian to Asselian Wordiekammen Formation. This unit marks the final fill (and drowning) of the rift basin and covers both the hanging wall and footwall. In this presentation our focus will be on details of the sedimentary architecture related to internal and local dipslope activity within the rift basin, particularly thickness and facies variations, and transport directions.

Marine habitat mapping of the Milford Haven Waterway, Wales, UK: Comparison of facies mapping and EUNIS classification for monitoring sediment habitats in an industrialized estuary

NASA Astrophysics Data System (ADS)

Carey, Drew A.; Hayn, Melanie; Germano, Joseph D.; Little, David I.; Bullimore, Blaise

2015-06-01

A detailed map and dataset of sedimentary habitats of the Milford Haven Waterway (MHW) was compiled for the Milford Haven Waterway Environmental Surveillance Group (MHWESG) from seafloor images collected in May, 2012 using sediment-profile and plan-view imaging (SPI/PV) survey techniques. This is the most comprehensive synoptic assessment of sediment distribution and benthic habitat composition available for the MHW, with 559 stations covering over 40 km2 of subtidal habitats. In the context of the MHW, an interpretative framework was developed that classified each station within a 'facies' that included information on the location within the waterway and inferred sedimentary and biological processes. The facies approach provides critical information on landscape-scale habitats including relative location and inferred sediment transport processes and can be used to direct future monitoring activities within the MHW and to predict areas of greatest potential risk from contaminant transport. Intertidal sediment 'facies' maps have been compiled in the past for MHW; this approach was expanded to map the subtidal portions of the waterway. Because sediment facies can be projected over larger areas than individual samples (due to assumptions based on physiography, or landforms) they represent an observational model of the distribution of sediments in an estuary. This model can be tested over time and space through comparison with additional past or future sample results. This approach provides a means to evaluate stability or change in the physical and biological conditions of the estuarine system. Initial comparison with past results for intertidal facies mapping and grain size analysis from grab samples showed remarkable stability over time for the MHW. The results of the SPI/PV mapping effort were cross-walked to the European Nature Information System (EUNIS) classification to provide a comparison of locally derived habitat mapping with European-standard habitat mapping. Cross-walk was conducted by assigning each facies (or group of facies) to a EUNIS habitat (Levels 3 or 5) and compiling maps comparing facies distribution with EUNIS habitat distribution. The facies approach provides critical information on landscape-scale habitats including relative location and inferred sediment transport processes. The SPI/PV approach cannot consistently identify key species contained within the EUNIS Level 5 Habitats. For regional planning and monitoring efforts, a combination of EUNIS classification and facies description provides the greatest flexibility for management of dynamic soft-bottom habitats in coastal estuaries. The combined approach can be used to generate and test hypotheses of linkages between biological characteristics (EUNIS) and physical characteristics (facies). This approach is practical if a robust cross-walk methodology is developed to utilize both classification approaches. SPI/PV technology can be an effective rapid ground truth method for refining marine habitat maps based on predictive models.

Late Pleistocene dune-sourced alluvial fans in coastal settings: Sedimentary facies and related processes (Mallorca, Western Mediterranean)

NASA Astrophysics Data System (ADS)

Pomar, F.; del Valle, L.; Fornós, J. J.; Gómez-Pujol, L.

2018-05-01

Aeolian-alluvial sedimentary interaction results in the formation of deposits characterized by typical alluvial sedimentary structures, but is composed of conspicuous amounts of aeolian sediments. The literature on this topic is limited and most works relate more with continental aeolian dunes or fluvial dune interference with fan bodies. Furthermore, there is a lack of examples of aeolian-alluvial sedimentary interference in coastal settings. In the western Mediterranean, there are many Pleistocene alluvial fan deposits built up partly by sediment originating from coastal dunes dismantled by alluvial streams. Very often, these deposits show a continuous sedimentary sequence through which we can derive the contribution and predominance of coastal, alluvial-colluvial and aeolian processes and their controls on landscape formation. This is an outstanding feature within coastal systems since it shows marine sediments reworked and integrated within coastal dune fields by aeolian transport, and the latter built up into alluvial fan bodies. In this sense, aeolian-alluvial interaction is the geomorphic-sedimentary expression of the coexistence and overlapping of alluvial and aeolian environments resulting in deposits sharing sedimentary features from both environments. The aim of this paper is to unravel the contribution of coastal dunes in the construction of alluvial fans bodies and identify the main sedimentary facies that constitute these deposits, as well as their climatic controls. For this reason, Es Caló fan (northern Mallorca) has been selected due to its well-exposed deposits exhibiting the alternation of aeolian, alluvial and colluvial deposits. Sedimentological and stratigraphic analyses based on 33 logs and complementary analyses demonstrate that most of the facies constituting the fan body are made up completely of marine bioclastic sands. These deposits record an alluvial fan sedimentary environment characterized by sediments inputs that do not proceed from non-alluvial/fluvial/colluvial systems. In fact they relate with a marine source. Chronologies on aeolianites of northern Mallorca indicate that up to four periods of aeolian deposition took place during cooling stages and marine regressions over the last 100 kyr. Moreover, the alternation of short warming-cooling fluctuations between the cooling stages may have provided the conditions necessary to generate stormy weather in the western Mediterranean, resulting in aeolian-alluvial interactions. Additionally, the dynamics of this sedimentary environment were only possible because during the Last Glacial Maximum, the sea level remained low enough to allow for the formation of coastal dune fields and fans.

Discrete Regularization for Calibration of Geologic Facies Against Dynamic Flow Data

NASA Astrophysics Data System (ADS)

Khaninezhad, Mohammad-Reza; Golmohammadi, Azarang; Jafarpour, Behnam

2018-04-01

Subsurface flow model calibration involves many more unknowns than measurements, leading to ill-posed problems with nonunique solutions. To alleviate nonuniqueness, the problem is regularized by constraining the solution space using prior knowledge. In certain sedimentary environments, such as fluvial systems, the contrast in hydraulic properties of different facies types tends to dominate the flow and transport behavior, making the effect of within facies heterogeneity less significant. Hence, flow model calibration in those formations reduces to delineating the spatial structure and connectivity of different lithofacies types and their boundaries. A major difficulty in calibrating such models is honoring the discrete, or piecewise constant, nature of facies distribution. The problem becomes more challenging when complex spatial connectivity patterns with higher-order statistics are involved. This paper introduces a novel formulation for calibration of complex geologic facies by imposing appropriate constraints to recover plausible solutions that honor the spatial connectivity and discreteness of facies models. To incorporate prior connectivity patterns, plausible geologic features are learned from available training models. This is achieved by learning spatial patterns from training data, e.g., k-SVD sparse learning or the traditional Principal Component Analysis. Discrete regularization is introduced as a penalty functions to impose solution discreteness while minimizing the mismatch between observed and predicted data. An efficient gradient-based alternating directions algorithm is combined with variable splitting to minimize the resulting regularized nonlinear least squares objective function. Numerical results show that imposing learned facies connectivity and discreteness as regularization functions leads to geologically consistent solutions that improve facies calibration quality.

Developing a shale heterogeneity index to predict fracture response in the Mancos Shale

NASA Astrophysics Data System (ADS)

DeReuil, Aubry; Birgenheier, Lauren; McLennan, John

2017-04-01

The interplay between sedimentary heterogeneity and fracture propagation in mudstone is crucial to assess the potential of low permeability rocks as unconventional reservoirs. Previous experimental research has demonstrated a relationship between heterogeneity and fracture of brittle rocks, as discontinuities in a rock mass influence micromechanical processes such as microcracking and strain localization, which evolve into macroscopic fractures. Though numerous studies have observed heterogeneity influencing fracture development, fundamental understanding of the entire fracture process and the physical controls on this process is still lacking. This is partly due to difficulties in quantifying heterogeneity in fine-grained rocks. Our study tests the hypothesis that there is a correlation between sedimentary heterogeneity and the manner in which mudstone is fractured. An extensive range of heterogeneity related to complex sedimentology is represented by various samples from cored intervals of the Mancos Shale. Samples were categorized via facies analysis consisting of: visual core description, XRF and XRD analysis, SEM and thin section microscopy, and reservoir quality analysis that tested porosity, permeability, water saturation, and TOC. Systematic indirect tensile testing on a broad variety of facies has been performed, and uniaxial and triaxial compression testing is underway. A novel tool based on analytically derived and statistically proven relationships between sedimentary geologic and geomechanical heterogeneity is the ultimate result, referred to as the shale heterogeneity index. Preliminary conclusions from development of the shale heterogeneity index reveal that samples with compositionally distinct bedding withstand loading at higher stress values, while texturally and compositionally homogeneous, bedded samples fail at lower stress values. The highest tensile strength results from cemented Ca-enriched samples, medial to high strength samples have approximately equivalent proportions of Al-Ca-Si compositions, while Al-rich samples have consistently low strength. Moisture preserved samples fail on average at approximately 5 MPa lower than dry samples of similar facies. Additionally, moisture preserved samples fail in a step-like pattern when tested perpendicular to bedding. Tensile fractures are halted at heterogeneities and propagate parallel to bedding planes before developing a through-going failure plane, as opposed to the discrete, continuous fractures that crosscut dry samples. This result suggests that sedimentary heterogeneity plays a greater role in fracture propagation in moisture preserved samples, which are more indicative of in-situ reservoir conditions. Stress-strain curves will be further analyzed, including estimation of an energy released term based on post-failure response, and an estimation of volume of cracking measure on the physical fracture surface.

Shoreline deposits and diagenesis resulting from two Late Pleistocene highstands near +5 and +6 metres, Durban, South Africa

USGS Publications Warehouse

Cooper, J.A.G.; Flores, R.M.

1991-01-01

In exposures of Pleistocene rocks on the east coast of South Africa, eight sedimentary facies were distinguished on the basis of petrology, grain size, internal structures and field relationships. These are interpreted as deposits of surf zone, breaker zone, swash zone, backbeach, boulder beach and dune environments. Three phases of deposition and diagenesis are recognized. As a result of the stabilising effect of pre-existing coastal facies, the deposits from successive sea level stands are stacked vertically in a narrow coast-normal strip. Early cementation prevented erosion of the deposits during subsequent transgressions. Deposition of subsequent facies took place on an existing coastal dune (Facies 1). A terrace was cut into this dune at a sea level 4.5 to 5 m above present. At this sea level, clastic shoreline sediments were deposited which make up the main sedimentary sequence exposed (Facies 2-7). The steep swash zone, coarse grain size, and comparison with modern conditions in the study area indicate clastic deposition on a high-energy, wave-dominated, microtidal coastline. Vertical stacking of progressively shallower water facies indicates progradation associated with slightly regressive conditions, prior to stranding of the succession above sea level. During a subsequent transgression to 5.5 or 6 m above present sea level, a second terrace was cut across the existing facies, which by then were partly lithified. A boulder beach (Facies 8) deposited on this terrace is indicative of high wave energy and a rocky coastline, formed by existing cemented coastal facies. Comparison with dated deposits from other parts of the South African coast suggest a Late Pleistocene age for Facies 2-8. Deposition was terminated by subsequent regression and continuing low sea levels during the remainder of the Pleistocene. Cementation of the facies took place almost entirely by carbonate precipitation. The presence of isopachous fibrous cements suggests early cementation of Facies 1, 2, 3 and 4 under marine conditions, initially as aragonite which has since inverted to calcite. Facies 5, 6 and 7 are cemented only by equant calcite spar, evidence of cementation in the meteoric phreatic and vadose zones. Lowering of the water table during regression caused the remaining pore space in Facies 1, 2, 3 and 4 to be filled with equant calcite spar. Decementation in a 130 cm wide zone is attributed to water table shifts associated with the later transgression which deposited Facies 8. The vertical stacking of the two depositional sequences may be attributed to rapid cementation of Facies 2, 3, 4, 5, 6 and 7 under humid, subtropical conditions. This lithified sequence then acted as a focus for deposition of coarse-grained shoreline facies (Facies 8) during the subsequent transgression. ?? 1991.

Advanced GPR imaging of sedimentary features: integrated attribute analysis applied to sand dunes

NASA Astrophysics Data System (ADS)

Zhao, Wenke; Forte, Emanuele; Fontolan, Giorgio; Pipan, Michele

2018-04-01

We evaluate the applicability and the effectiveness of integrated GPR attribute analysis to image the internal sedimentary features of the Piscinas Dunes, SW Sardinia, Italy. The main objective is to explore the limits of GPR techniques to study sediment-bodies geometry and to provide a non-invasive high-resolution characterization of the different subsurface domains of dune architecture. On such purpose, we exploit the high-quality Piscinas data-set to extract and test different attributes of the GPR trace. Composite displays of multi-attributes related to amplitude, frequency, similarity and textural features are displayed with overlays and RGB mixed models. A multi-attribute comparative analysis is used to characterize different radar facies to better understand the characteristics of internal reflection patterns. The results demonstrate that the proposed integrated GPR attribute analysis can provide enhanced information about the spatial distribution of sediment bodies, allowing an enhanced and more constrained data interpretation.

A model of tephra dispersal from an early Palaeogene shallow submarine Surtseyan-style eruption(s), the Red Bluff Tuff Formation, Chatham Island, New Zealand

NASA Astrophysics Data System (ADS)

Sorrentino, Leonor; Stilwell, Jeffrey D.; Mays, Chris

2014-03-01

The Red Bluff Tuff Formation, an early Palaeogene volcano-sedimentary shallow marine succession from the Chatham Islands (New Zealand), provides a unique framework, in eastern 'Zealandia', to explore tephra dispersal processes associated with ancient small phreatomagmatic explosions (i.e. Surtseyan-style eruptions). Detailed sedimentological mapping, logging and sampling integrated with the results of extensive laboratory analyses (i.e. grain-size, componentry and applied palaeontological methods) elucidated the complex mechanisms of transport and deposition of nine identified resedimented fossiliferous volcaniclastic facies. These facies record the subaqueous reworking and deposition of tephra from the erosion and degradation of a proximal, entirely submerged ancient Surtseyan volcanic edifice (Cone II). South of this volcanic cone, the lowermost distal facies provides significant evidence of deposition as water-supported volcanic- or storm-driven mass flows (e.g. turbidity currents and mud/debris flows) of volcaniclastic and bioclastic debris, whereas the uppermost distal facies exhibit features of tractional sedimentary processes caused by shallow subaqueous currents. Further north, within the proximity of the volcanic edifice, the uppermost facies are represented by an abundant, diverse, large, and well preserved in situ fauna of shallow marine sessile invertebrates (e.g. corals and sponges) that reflect the protracted biotic stabiliszation and rebound following pulsed volcanic events. Over a period of time, these stable and wave-eroded volcanic platforms were inhabited by a flourishing and diversifying marine community of benthic and sessile pioneers (corals, bryozoans, molluscs, brachiopods, barnacles, sponges, foraminifera, etc.). This succession exhibits a vertical progression of sedimentary structures (i.e. density, cohesive and mass flows, and cross-bedding) and our interpretations indicate a shallowing upwards succession. This study reports for the first time mechanisms of degradation of a Surtseyan volcano on Chatham Islands and contributes to a better understanding of complex ancient volcano-sedimentary subaqueous terrains. This model of deposition (i.e. onlapping/overlapping features onto the remains of volcanic edifice(s), a vertical transition of structures from deeper- to shallower-marine environments, disaster faunas and subsequent preferential colonisation of diverse biota, including large in situ sessile invertebrates, on the summit), characterises an extraordinary example to be applied to other ancient subaqueous volcanic environments.

Erosion and sedimentation during the September 2015 flooding of the Kinu River, central Japan.

PubMed

Dan Matsumoto; Sawai, Yuki; Yamada, Masaki; Namegaya, Yuichi; Shinozaki, Tetsuya; Takeda, Daisuke; Fujino, Shigehiro; Tanigawa, Koichiro; Nakamura, Atsunori; Pilarczyk, Jessica E

2016-09-28

Erosional and sedimentary features associated with flooding have been documented in both modern and past cases. However, only a few studies have demonstrated the relationship between these features and the corresponding hydraulic conditions that produced them, making it difficult to evaluate the magnitude of paleo-flooding. This study describes the characteristics associated with inundation depth and flow direction, as well as the erosional and sedimentary features resulting from the disastrous flooding of the Kinu River, central Japan, in September 2015. Water levels rose rapidly due to heavy rainfall that eventually overtopped, and subsequently breached, a levee in Joso City, causing destructive flooding on the surrounding floodplain. Distinctive erosional features are found next to the breached levee, while depositional features, such as a sandy crevasse-splay deposit are found further away from the breach. The deposit can be divided into three units based on sedimentary facies. The vertical and lateral changes of these sedimentary facies may be the result of temporal and spatial changes associated with flow during the single flooding event. These observations and quantitative data provide information that can be used to reveal the paleohydrology of flood deposits in the stratigraphic record, leading to improved mitigation of future flooding disasters.

Major transgression during Late Cretaceous constrained by basin sediments in northern Africa: implication for global rise in sea level

NASA Astrophysics Data System (ADS)

An, Kaixuan; Chen, Hanlin; Lin, Xiubin; Wang, Fang; Yang, Shufeng; Wen, Zhixin; Wang, Zhaoming; Zhang, Guangya; Tong, Xiaoguang

2017-12-01

The global rise in sea level during the Late Cretaceous has been an issue under discussion by the international geological community. Despite the significance, its impact on the deposition of continental basins is not well known. This paper presents the systematic review on stratigraphy and sedimentary facies compiled from 22 continental basins in northern Africa. The results indicate that the region was dominated by sediments of continental facies during Early Cretaceous, which were replaced by deposits of marine facies in Late Cretaceous. The spatio-temporal distribution of sedimentary facies suggests marine facies deposition reached as far south as Taoudeni-Iullemmeden-Chad-Al Kufra-Upper Egypt basins during Turonian to Campanian. These results indicate that northern Africa underwent significant transgression during Late Cretaceous reaching its peak during Turonian to Coniacian. This significant transgression has been attributed to the global high sea-level during this time. Previous studies show that global rise in sea level in Late Cretaceous may have been driven by an increase in the volume of ocean water (attributed to high CO2 concentration and subsequently warm climate) and a decrease in the volume of the ocean basin (attributed to rapid production of oceanic crust and seamounts). Tectonic mechanism of rapid production of oceanic crust and seamounts could play a fundamental role in driving the global rise in sea level and subsequent transgression in northern Africa during Late Cretaceous.

Changes in Depositional Setting Reflect Rising Sealevel in Latest Holocene Sediments of the Hudson River

NASA Astrophysics Data System (ADS)

Slagle, A.; Carbotte, S. M.; Ryan, W. B.; Bell, R.; Nitsche, F. O.; McHugh, C. M.

2002-12-01

An extensive database of geophysical and sampling data in the Hudson River has been obtained in ten study areas between the New York Harbor and the Troy Dam. These data include bathymetry, bank-to-bank coverage of side-looking sonar imagery, subbottom reflection profiles, sediment cores and grabs. Geophysical properties, including gamma density, magnetic susceptibility and P-wave velocity, have been measured in a 9.3 m Vibracore (SD-30) from the near-channel tidal flats of the Tappan Zee area. Three distinct sedimentary facies have been identified, based on changes in physical properties, lithology and seismic reflections. Facies 1 is an oyster-rich unit with unstratified sediments and high sound velocities, and is found in the upper 1.5 m of core SD-30. Chirp subbottom data, which provide reflectors down to approximately 4 m depth, show a distinct horizon at 1.5 m, supporting the change seen in physical property data and lithology at this depth. A unit characterized by laminated sediments, interbedded with homogeneous layers and coquina layers, is identified as Facies 2 and is found between 1.5 and 6.1 m. This facies has high magnetic susceptibility and the appearance of discrete density cycles. The oldest unit, Facies 3, extends from 6.1 m to the base of the core at 9.3 m. It is made up of oyster-rich, unbedded sediments and thick coquina layers, and is characterized by low magnetic susceptibility. Radiocarbon dating of oysters and bivalves indicates that the different facies in SD-30 correspond to different sedimentation rates, with highest values occurring during deposition of Facies 2. The facies changes and variations in sedimentation rates are attributed to an evolving depositional environment in the tidal flats of the Tappan Zee area due to rising sealevel. Extrapolating from nearby cores that penetrate deeper into the sedimentary record, Facies 3 sits above post-glacial fluvial sands and represents the transition from a fresh to more brackish environment, suitable for development of oyster beds. The laminated sediments of Facies 2 are attributed to infilling of the tidal flats during a rapid rise in sealevel. The lack of laminated sediments and low sedimentation rates of Facies 1 are attributed to the modern wave-base dominated depositional setting in the Tappan Zee area.

Facies-related fracturing in turbidites: insights from the Marnoso-Arenacea Fm. (Northern Apennines, Italy)

NASA Astrophysics Data System (ADS)

Ogata, Kei; Storti, Fabrizio; Balsamo, Fabrizio; Bedogni, Enrico; Tinterri, Roberto; Fetter, Marcos; Gomes, Leonardo; Hatushika, Raphael

2016-04-01

Natural fractures deeply influence subsurface fluid flow, exerting a primary control on resources like aquifers, hydrocarbons and geothermal reservoirs, and on environmental issues like CO2 storage and nuclear waste disposal. In layered sedimentary rocks, depositional processes-imprinted rock rheology favours the development of both mechanical anisotropy and heterogeneity on a wide range of scales, and are thus expected to strongly influence location and frequency of fractures. To better constrain the contribution of stratigraphic, sedimentological and petrophysical attributes, we performed a high-resolution, multidisciplinary study on a selected stratigraphic interval of jointed foredeep turbidites in the Miocene Marnoso-arenacea Formation (Northern Apennines, Italy), which are characterised by a great lateral and vertical variability of grain-size and depositional structures. Statistical relationships among field and laboratory data significantly improve when the single facies scale is considered, and, for similar facies recording different evolutionary stages of the parent turbidity currents, we observed a direct correlation between the three-dimensional anisotropies of rock hardness tensors and the normalized fracture frequencies, testifying for the primary sedimentary flow-related control on fracture distributions.

Palaeoenvironmental significance of organic facies variation across the Lower Toarcian in the northeastern sector of the Lusitanian Basin, Portugal

NASA Astrophysics Data System (ADS)

Rodrigues, Bruno; Duarte, Luís V.; Graciano Mendonça Filho, João; Guilherme Santos, Luiz

2015-04-01

The Pliensbachain - Toarcian is particularly well represented in the Lusitanian Basin (central western Portugal), dominated by benthic and necktonic marl-limestone succession, well dated by ammonites. In this general context, and besides all aspects related to the Toarcian Oceanic Anoxic Event (T-OAE), the Polymorphum (=Tenuicostatum) - Levisoni (= Serpentinum) ammonite zone boundary marks one of the most sedimentological changes occurred in the whole basin (Duarte, 1997). Among all well known available sections for this interval (e.g. Peniche and Rabaçal), the Alcabideque section shows at the base of Levisoni Zone a singular record of brownish marls very poor in macrofauna (the "Chocolate Marls"), unit that is exclusive of northern part of the basin (see Pittet et al., 2014). With the aim to improve the understand about the sedimentary vertical changes occurred between the late Pliensbachian (Emaciatum Zone) and the base of Levisoni Zone, and to clarify the palaeoenvironment of such unit, we developed an organic facies analysis, including palynofacies and organic geochemistry [total organic carbon (TOC), sulfur and biomarkers]. Results confirm that sediments are particularly poor in organic matter, with the highest TOC value reaching 0.41 wt.% around the top of Polymorphum Zone. In the studied succession (around 20 m thick) the organic content is represented mainly by components from palynomorph (essentially sporomorphs) and phytoclast (both opaque and non-opaque) groups (>85%). A strong change occurs at the base of Chocolate Marls, through a clear increase of sporomorphs under the form of tetrads and agglomerates and the lowest occurrence (<2%) of amorphous organic matter, after a peak of this group and marine palynomorphs recorded at the top of Polymorphum Zone. This continental influence occurred at the base of Levisoni Zone is also confirmed by the η-alkanes distribution profile and several biomarkers such as isoprenoides, terpanes and steranes. With these data we emphasize the special sedimentation occurred in the Lusitanian Basin across the T-OAE, clarifying the sedimentary nature and the palaeoenvironmental significance of the "Chocolate Marls", clearly associated with a drop in the sea level. This evidence agrees with the general interpretation presented by previous works about the sedimentary evolution of the whole Lower Toarcian of the western Iberian margin. References Duarte, L. V. 1997. Facies analysis and sequential evolution of the Toarcian-Lower Aalenian series in the Lusitanian Basin (Portugal). Com. Inst. Geol. e Mineiro, 83: 65-94. Pittet, B., Suan, G., Lenoir, F., Duarte, L.V. & Mattioli, E. 2014. Carbon isotope evidence for sedimentary discontinuities in the lower Toarcian of the Lusitanian Basin (Portugal): Sea level change at the onset of the Oceanic Anoxic Event. Sedimentary Geology, 303: 1-14.

Facies Distribution and Petrophysical Properties of Shoreface-Offshore Transition Environment in Sandakan Formation, NE Sabah Basin

NASA Astrophysics Data System (ADS)

Majid, M. Firdaus A.; Suhaili Ismail, M.; Rahman, A. Hadi A.; Azfar Mohamed, M.

2017-10-01

Newly exposed outcrop of Miocene shallow marine sandstone in Sandakan Formation, allows characterization of the facies distribution and petrophysical properties of shoreface to offshore transition environment. Six facies are defined: (1) Poorly bioturbated Hummocky Cross Stratified (HCS) sandstone (F1), (2) Moderately bioturbated HCS sandstone (F2), (3) Well bioturbated HCS sandstone (F3), (4) Poorly bioturbated Swaley Cross Stratified (SCS) sandstone (F4), (5) Interbedded HCS sandstone with sand-silt mudstone, (6) Heterolithic mudstone. The sedimentary successions were deposited in upper to lower shoreface, and offshore transition environment. Facies F3, F4 and F5 shows good reservoir quality with good porosity and fair permeability values from 20% to 21% and 14 mD to 33 mD respectively. While Facies F1 exhibits poor reservoir quality with low permeability values 3.13 mD.

Geophysical and topographic expression of early Mesozoic grand cycles of the Milankovitch band

NASA Astrophysics Data System (ADS)

Olsen, P. E.; Reynolds, D. J.; Goldberg, D.; Kent, D. V.; Whiteside, J. H.

2012-12-01

Grand cycles are orbitally controlled insolation cycles that have frequencies significantly lower than the precession-related ~1/100ky "eccentricity" cycles (1). We have previously shown that variations in sedimentary facies and δ13C interpreted in terms of lake level changes in Triassic-Jurassic cores of the Newark Basin Coring Project (NBCP) of eastern North America track predicted orbital cycles related to precession (2,3). In addition to the usual ~1/20ky and "spilt" ~1/100ky cycles, Grand Cycles with frequencies of 1/405ky (g2-g5) are very prominent and cycles with much lower frequency of ~1/1.8m.y. representing the g4-g3 frequency are present. The latter differs from the present frequency of ~1/2.4m.y. because of the chaotic diffusion of planetary orbits (4). Wavelet analysis of borehole geophysical logs from the NBCP show the same basic frequencies as do sedimentary facies. The high-frequency precession-related cycles as seen in natural gamma and sonic velocity logs are strikingly complimentary to visually identified sedimentary facies patterns because the former tend to show the most striking cyclicity where the sedimentary facies pattern are the most muted. The 1/405ky cycles are also very prominent; but other grand cycles, while detectable, are distorted by the necessary detrending of each of the seven borehole records that comprise the NBCP composite (cf. 5,6). Simple detrending procedures leave a low-frequency residue and more complex models prejudge the low frequencies we are trying to detect. This emphasizes the importance of the facies interpretations that requires no detrending, and clear understanding of the meaning of the geophysical environmental proxies. As might be expected from the seismic velocity logs, synthetic seismic traces generated from the borehole data of the NBCP show the grand cycles. When tied to very long industry exploratory borehole records from the Newark basin, themselves tied to seismic lies, both the 1/405ky (g2-g5) and ~1/1.8m.y. (g4-g3) cycles can be clearly seen as the most coherent components of the seismic profiles across the basin (6). The topographic expression of the deeply eroded tilted strata of the Newark basin section also reveals the grand cycles which can be seen from space, with ridges reflecting time intervals of high- and valleys low-precessional variability that can be directly tied to the stratigraphy, much as bundles of plausibly obliquity-related rhythms can be seen in crater walls on Mars (7). All of these ways of observing the grand cycles of the Milankovitch band reflect their importance as major features of the sedimentary record and are complementary means to detect and empirically map the chaotic evolution of the solar system. References: 1) Olsen PE, 2008, GSA Abst. Prog. 40(6):282. 2) Olsen PE, Kent DV, 1996, PPP 122:1. 3) Whiteside JH et al. 2011, PPP 301:1; 4) Olsen PE, Kent DV, 1999, Phil. Trans. Roy. Soc. Lond. (A), 357:1761. 5) Goldberg DS, 2003, in LeTorneau PM & Olsen PE, Columbia Univ. Press., pp 104-117. 6) Reynolds DJ, 1993, Ph.D. thesis Columbia Univ., NY. 7) Lewis K. et al. 2008, Science 322:1532.

Sedimentary facies and depositional environments of early Mesozoic Newark Supergroup basins, eastern North America

USGS Publications Warehouse

Smoot, J.P.

1991-01-01

The early Mesozoic Newark Supergroup consists of continental sedimentary rocks and basalt flows that occupy a NE-trending belt of elongate basins exposed in eastern North America. The basins were filled over a period of 30-40 m.y. spanning the Late Triassic to Early Jurassic, prior to the opening of the north Atlantic Ocean. The sedimentary rocks are here divided into four principal lithofacies. The alluvial-fan facies includes deposits dominated by: (1) debris flows; (2) shallow braided streams; (3) deeper braided streams (with trough crossbeds); or (4) intense bioturbation or hyperconcentrated flows (tabular, unstratified muddy sandstone). The fluvial facies include deposits of: (1) shallow, ephemeral braided streams; (2) deeper, flashflooding, braided streams (with poor sorting and crossbeds); (3) perennial braided rivers; (4) meandering rivers; (5) meandering streams (with high suspended loads); (6) overbank areas or local flood-plain lakes; or (7) local streams and/or colluvium. The lacustrine facies includes deposits of: (1) deep perennial lakes; (2) shallow perennial lakes; (3) shallow ephemeral lakes; (4) playa dry mudflats; (5) salt-encrusted saline mudflats; or (6) vegetated mudflats. The lake margin clastic facies includes deposits of: (1) birdfoot deltas; (2) stacked Gilbert-type deltas; (3) sheet deltas; (4) wave-reworked alluvial fans; or (5) wave-sorted sand sheets. Coal deposits are present in the lake margin clastic and the lacustrine facies of Carnian age (Late Triassic) only in basins of south-central Virginia and North and South Carolina. Eolian deposits are known only from the basins in Nova Scotia and Connecticut. Evaporites (and their pseudomorphs) occur mainly in the northern basins as deposits of saline soils and less commonly of saline lakes, and some evaporite and alkaline minerals present in the Mesozoic rocks may be a result of later diagenesis. These relationships suggest climatic variations across paleolatitudes, more humid to the south where coal beds are preserved, and more arid in the north where evaporites and eolian deposits are common. Fluctuations in paleoclimate that caused lake levels to rise and fall in hydrologically closed basins are preserved as lacustrine cycles of various scales, including major shifts in the Late Triassic from a wet Carnian to an arid Norian. In contrast, fluvial deposits were mainly formed in response to the tectonic evolution of the basins, but to some extent also reflect climatic changes. The Newark Supergroup illustrates the complexity of rift-basin sedimentation and the problems that may arise from using a single modern analog for sedimentary deposition spanning millions of years. It also shows that a tremendous wealth of depositional, climatic, and tectonic information is preserved in ancient rift-basin deposits which can be recovered if the depositional processes of modern rift-basin deposits are understood. ?? 1991.

Process sedimentology of submarine fan deposits - new perspectives

NASA Astrophysics Data System (ADS)

Postma, George

2017-04-01

To link submarine fan process sedimentology with sand distribution, sand body architecture, texture and fabric, the field geologist studies sedimentary facies, facies associations (fan elements) and stratigraphy. Facies analysis resides on factual knowledge of modern fan morphodynamics and physical modelling of en-masse sediment transport. Where do we stand after 55 years of submarine research, i.e. the date when the first submarine fan model was launched by Arnold Bouma in 1962? Since that date students of submarine fans have worked on a number of important, recurring questions concerned with facies analysis of submarine successions in outcrop and core: 1. What type of sediment transport produced the beds? 2. What facies can be related to initial flow conditions? 3. What is the significance of grain size jumps and bounding surface hierarchy in beds consisting of crude and spaced stratification (traction carpets)? Do these point to multi flow events or to flow pulsations by one and the same event? 4. What facies associations relate to the basic elements of submarine fans? 5. What are the autogenic and allogenic signatures in submarine fans? Particularly in the last decade, the enormous technical advancement helped to obtain high-quality data from observations of density flows in modern canyons, deep basins and deep-water delta slopes (refs 1,2,3). In combination with both physical (refs 4,5) and numerical modelling (ref 6) these studies broke new ground into our understanding of density flow processes in various submarine environments and have led to new concepts of submarine fan building by super- and subcritical high-density flow (ref 7). Do these new concepts provide better answers to our recurrent questions related to the morphodynamics of submarine fans and prediction of sand body architecture? In discussing this open question, I shall 1. apply the new concepts to a modern and ancient example of a channel-lobe-transition-zone (ref 8); 2. raise the problem of recognizing time in turbidite beds and sequences; 3. discuss consequences for the Bouma facies model and suggest an alternative model Uncertainties in facies analysis remain and clear understanding of submarine fan morphodynamics awaits further monitoring of the modern fan environments and new modelling studies (ref 9). References 1. Fildani, A. Normark, W.R., Kostic, S., and Parker, G., 2006. Sedimentology, 53, 1265-1287. 2. Paull, C.K., Ussler, W., Caress, D.W., Lundsten, E., Covault, J.A., Maier, K.L., Xu, J., and Augenstein, S., 2010. Geosphere, 6, 755-774. 3. Hughes Clarke, J. E., 2016. Nature Communications 7:11896 4. Spinewine, B., Sequeiros, O.E., Garcia, M.H., Beaubouef, R.T., Sun, T., and Savoye, B., 2009. J of Sediment Research, v. 79, 608-628. 5. Hoyal, D. C. J. D., and B. A. Sheets (2009) The 33rd International Association of Hydraulic Research Congress. 6. Kostic, S., 2011. Geosphere, 7, 294-304. 7. Postma, G. and Cartigny, M., 2014. Geology, 42, 987-990. 8. Postma G, et al. , 2016, In: Lamarche G, Mountjoy J (eds) Submarine mass movements and their consequences. Springer, Dordrecht, pp 469-478. 9. Talling, P.J., et al. ., 2015. Journal of Sedimentary Research, 85, 153-169.

Stratigraphy and depositional environments of the Lower Mississippian Joana Limestone in southern White Pine and northern Lincoln Counties, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilmore, T.J.

1990-04-01

The Lower Mississippian Joana Limestone in the southern Schell Creek and Egan ranges of east-central Nevada is composed of three depositional facies: the unbedded wackestone with grainstone/packstone facies or Facies 1; the bedded wackestone with mudstone facies or Facies 2; and the restricted wackestone, mudstone/shale facies, or Facies 3. Facies 1 is characterized by Waulsortian-type carbonate buildups with massive unbedded wackestone cores, grainstone flanking beds and grainstone/packstone capping units. Facies 2 is characterized by an upward progression of sedimentary bedding types from thinly laminated to large scale trough cross-bedding that indicates a shoaling upward of this facies. Facies 3 ismore » characterized by sparse wackestones, mudstones, and shale which show a decrease in both faunal types and diversity and an increase in fine clastics. The restricted wackestone, mudstone/shale facies grades upward into the Mississippian Chainman Shale. The age of the Joana Limestone is confirmed as late Kinderhookian to early Osagean based primarily on conodonts and foraminifera. In the middle beds of the Joana Limestone, the previously unreported upper Siphonodella crenulata conodont zone occurs which helps correlate the Joana Limestone with regional transgressive/regressive sea level events. Color alteration indices of these conodonts are 1.5 to 2, and occur in the oil generation window. Additionally, oil staining was observed in numerous samples located primarily in the lower half of the formation, represented by Facies 3, the unbedded wackestone with grainstone/packstone facies.« less

Environment and Climate Changes during the Holocene: Inferred from Sedimentary Record/Proxies of a Paleodelta Region, Southwest Coast of India

NASA Astrophysics Data System (ADS)

Allu, N. C.; Prakash, V.; Gautam, P. K.; Bera, S. K.

2014-12-01

This work explains the sedimentation history and environment and climate changes during the Holocene along the southwest coast of India. The area is characterized by various landforms such as lagoons, barrier islands, beach ridges, paleostrandlines, alluvial plains, marshy lands and flood plains. Paleodelta, located at the mouth of the modern Periyar River is an important geomorphic marker. A borehole of 40 m depth was drilled in the paleodelta and sediment samples were recovered at different depth intervals. Paleoclimate and paleo-environment were inferred based on geochronology, textural and geotechnical parameters, clay minerals, and pollen analysis results. The bottom of the borehole represents an age of ~ 12 ka BP. Sediments exhibit coarsening texture upwards of the borehole, with fine mud and peat intercalations at the bottom. Six litho facies - muddy sand, sand, sandy mud, silty sand, sandy silt, and mud - were recorded. Geotechnical properties comprising moisture content, organic carbon, plasticity index record high values, whereas low bulk density associated with a low critical shear stress, are recorded. An increase in illite and to a lesser degree smectite with concomitant decrease in kaolinite is observed. Sediment texture represents a major change of depositional environment from marine to fluvial sedimentary facies during the major sea level fall i.e., after 7 ka B.P. The present sea level attained during 4-5 ka B.P; major rise of sea level has taken place from 7-11 ka BP and regression during 7 - 5 ka B.P. These transgression and regression phases introduced the changes in the environment of deposition. The monsoon was dynamic and more intense after the major fall of sea level causing the fluctuations in the fluvial facies. Upward coarsening of grain size in the borehole indicates change in sediment deposition due to increased hydrodynamic conditions and strong fluvial action, which can be linked to marine regression. Geotechnical properties suggest textural changes and sedimentary facies. An upward increase in smectite and kaolinite and decreasing illite supports major fall in sea level and also the aridity. Pollen record of sediment strata supports the paleo-environment dominated by the presence of semi-evergreen type of mangrove plants during mid- to early-Holocene times.

Shoaling of Aguadilla Harbor, Puerto Rico

DTIC Science & Technology

2007-06-01

S. D. Nio, ed., Tide-influenced sedimentary environments and facies . D. Reidel Publishing Company, 275-288. Gao, S., and M. Collins. 1994...of STA to further their understanding of sedimentary environments . A number of authors found their results to agree, either in whole or in part, with...divided into three principal Transport Environments (TEs). Two of these comprised the north and south halves of Bahia de Aguadilla, and a third

Erosion and sedimentation during the September 2015 flooding of the Kinu River, central Japan

PubMed Central

Dan Matsumoto; Sawai, Yuki; Yamada, Masaki; Namegaya, Yuichi; Shinozaki, Tetsuya; Takeda, Daisuke; Fujino, Shigehiro; Tanigawa, Koichiro; Nakamura, Atsunori; Pilarczyk, Jessica E.

2016-01-01

Erosional and sedimentary features associated with flooding have been documented in both modern and past cases. However, only a few studies have demonstrated the relationship between these features and the corresponding hydraulic conditions that produced them, making it difficult to evaluate the magnitude of paleo-flooding. This study describes the characteristics associated with inundation depth and flow direction, as well as the erosional and sedimentary features resulting from the disastrous flooding of the Kinu River, central Japan, in September 2015. Water levels rose rapidly due to heavy rainfall that eventually overtopped, and subsequently breached, a levee in Joso City, causing destructive flooding on the surrounding floodplain. Distinctive erosional features are found next to the breached levee, while depositional features, such as a sandy crevasse-splay deposit are found further away from the breach. The deposit can be divided into three units based on sedimentary facies. The vertical and lateral changes of these sedimentary facies may be the result of temporal and spatial changes associated with flow during the single flooding event. These observations and quantitative data provide information that can be used to reveal the paleohydrology of flood deposits in the stratigraphic record, leading to improved mitigation of future flooding disasters. PMID:27677769

Limestones: the love of my life - sun, sea and cycles (Jean Baptiste Lamarck Medal Lecture)

NASA Astrophysics Data System (ADS)

Tucker, M. E.

2009-04-01

In studies of sedimentary rocks we are striving to understand the short and long-term controls on deposition that lead to the variety of facies we see in the geological record. With the development and application of sequence stratigraphy has come the realisation that in most cases the stratigraphic record is not random, but there are patterns and trends in the nature (composition, facies, diagenesis) and thickness of sedimentary units. In addition, sedimentary cycles are widely, if not ubiquitously, developed through stratigraphic successions, and do themselves vary in thickness and facies through a formation and through time. In many cases, orbital forcing is clearly a major control, in addition to longer term tectonic and tectono-eustatic processes. Understanding the major controls on the stratigraphic record and the processes involved in deposition enables us to develop a degree of prediction for the occurrence of particular facies and rock-types. This is especially significant in terms of hydrocarbon potential in frontier basins, notably in the search for source and reservoir rocks. In the case of carbonate and carbonate-evaporite successions, recent work is showing that even at the higher-frequency scale of individual beds and bed-sets, there are regular patterns and changes in thickness. These show that controls on deposition are not random but well organised. Studies of Carboniferous shelf/mid-ramp bioclastic limestones and Jurassic shallow-marine oolites from England reveal systematic variations in bed thickness, as well as oxygen isotopes, Sr and org C values. Permian lower slope carbonates from NE England show thinning-thickening-upward patterns in turbidite bed thickness on several orders of scale. Turbidity current frequency of 1 per ~200 years can be deduced from thicknesses of interbedded laminated facies, which provide the timescale. Beds in ancient shelf and slope carbonates of many geological periods are on a millennial-scale and their features and patterns clearly indicate that millennial-scale changes in climate, most likely driven by fluctuations in solar output, analogous to the D-O cycles of the Quaternary, were responsible, and that these were then modulated by orbital forcing. Solar forcing rules in carbonates, even at the highest frequency.

Stable iron isotopes and microbial mediation in red pigmentation of the Rosso Ammonitico (mid-late Jurassic, Verona area, Italy).

PubMed

Préat, Alain R; de Jong, Jeroen T M; Mamet, Bernard L; Mattielli, Nadine

2008-08-01

The iron (Fe) isotopic composition of 17 Jurassic limestones from the Rosso Ammonitico of Verona (Italy) have been analyzed by Multiple-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS). Such analysis allowed for the recognition of a clear iron isotopic fractionation (mean -0.8 per thousand, ranging between -1.52 to -0.06 per thousand) on a millimeter-centimeter scale between the red and grey facies of the studied formation. After gentle acid leaching, measurements of the Fe isotopic compositions gave delta(56)Fe values that were systematically lower in the red facies residues (median: -0.84 per thousand, range: -1.46 to +0.26 per thousand) compared to the grey facies residues (median: -0.08 per thousand, range: -0.34 to +0.23 per thousand). In addition, the red facies residues were characterized by a lighter delta(56)Fe signal relative to their corresponding leachates. These Fe isotopic fractionations could be a sensitive fingerprint of a biotic process; systematic isotopic differences between the red and grey facies residues, which consist of hematite and X-ray amorphous iron hydroxides, respectively, are hypothesized to have resulted from the oxidizing activity of iron bacteria and fungi in the red facies. The grey Fe isotopic data match the Fe isotopic signature of the terrestrial baseline established for igneous rocks and low-C(org) clastic sedimentary rocks. The Fe isotopic compositions of the grey laminations are consistent with the influx of detrital iron minerals and lack of microbial redox processes at the water-interface during deposition. Total Fe concentration measurements were performed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) (confirmed by concentration estimations obtained by MC-ICP-MS analyses of microdrilled samples) on five samples, and resultant values range between 0.30% (mean) in the grey facies and 1.31% (mean) in the red facies. No correlation was observed between bulk Fe content and pigmentation or between bulk Fe content and Fe isotopic compositions. The rapid transformation of the original iron oxyhydroxides to hematite could have preserved the original isotopic composition if it had occurred at about the same temperature. This paper supports the use of Fe isotopes as sensitive tracers of biological activities recorded in old sedimentary sequences that contain microfossils of iron bacteria and fungi. However, a careful interpretation of the iron isotopic fractionation in terms of biotic versus abiotic processes requires supporting data or direct observations to characterize the biological, (geo)chemical, or physical context in relation to the geologic setting. This will become even more pertinent when Fe isotopic studies are expanded to the interplanetary realm.

Sedimentary structures and stratal geometries at the foothills of Mount Sharp: their role in paleoenvironmental interpretation

NASA Astrophysics Data System (ADS)

Gupta, S.; Rubin, D. M.; Sumner, D. Y.; Grotzinger, J. P.; Lewis, K. W.; Stack, K.; Kah, L. C.; Banham, S.; Edgett, K. S.

2015-12-01

The Mars Science Laboratory Curiosity rover has been exploring sedimentary rocks at the foothills of Mount Sharp since August 2014. Robust interpretation of the paleoenvironmental contexts requires detailed facies analysis of these rocks including analysis and interpretation of sedimentary structures and sediment body geometries. Here, we describe some of the detailed sedimentary structures and sedimentary geometries observed by Curiosity between the Pahrump_Hills field site and its current location at Marias Pass. The Pahrump Hills sedimentary section comprises a succession dominated by finely laminated mudstones of the Murray formation that are interpreted to have been deposited in an ancient lake within Gale crater. Toward the top of the Pahump Hills succession, we observe the appearance of coarser-grained sandstones that are interstratified within the lacustrine mudstones. These sandstones that include Whale Rock and Newspaper Rock show lenticular geometries, and are pervasively cross-stratified. These features indicate that currents eroded shallow scours in the lake beds that were then infilled by deposition from migrating subaqueous dunes. The paleoenvironmental setting may represent either a gullied delta front setting or one in which lake level fall caused fluvial erosion and infilling of the shallow scours. Since leaving Pahrump_Hills, Curiosity has imaged extensive exposures of strata that are partly correlative with and stratigraphically overlie the uppermost part of the Pahrump section. Isolated cross-bedded sandstones and possible interstratified conglomerates beds occur within Murray formation mudstones. Capping sandstones with a likely variety of environmental contexts overlie mudstones. Where imaged in detail, sedimentary structures, such as trough-cross bedding and possible eolian pinstriping, provide constraints on plausible sedimentary processes and bounds on depositional setting.

Slope-apron deposition in an ordovician arc-related setting: The Vuelta de Las Tolas Member (Suri Formation), Famatina Basin, northwest Argentina

USGS Publications Warehouse

Mangano, M.G.; Buatois, L.A.

1997-01-01

The Ordovician Suri Formation is part of the infill of the Famatina Basin of northwest Argentina, which formed in an active setting along the western margin of early Paleozoic Gondwana. The lower part of this formation, the Vuelta de Las Tolas Member, records sedimentation on a slope apron formed in an intra-arc basin situated on a flooded continental arc platform. The coincidence of a thick Arenig-Llanvirn sedimentary succession and volcanic-plutonic arc rocks suggests an extensional or transtensional arc setting, and is consistent with evidence of an extensional regime within the volcanic arc in the northern Puna region. The studied stratigraphic sections consist of volcanic rocks and six sedimentary facies. The facies can be clustered into four facies associations. Association 1, composed of facies A (laminated siltstones and mudstones) and B (massive mudstones and siltstones), is interpreted to have accumulated from silty-muddy high-and low-density turbidity currents and highly fluid, silty debris flows, with subsequent reworking by bottom currents, and to a lesser extent, hemipelagic suspension in an open-slope setting. Facies association 2 is dominated by facies C (current-rippled siltstones) strata. These deposits are interpreted to record overbank sedimentation from fine-grained turbidity currents. Facies E (matrix-supported volcanic breccias) interbedded with andesitic lava units comprises facies association 3. Deposition was contemporaneous with subaqueous volcanic activity, and accumulated from cohesive debris flows in a coarse-grained wedge at the base of slope. Facies association 4 is typified by facies D (vitric fine-grained sandstones and siltstones) and F (channelized and graded volcanic conglomerates and breccias) deposits. These strata commonly display thinning-and fining-upward trends, indicating sedimentation from highly-concentrated volcaniclastic turbidity currents in a channelized system. The general characteristics of these deposits of fresh pyroclastic detritus suggest that their accumulation was contemporaneous with, or post-dated shallow-water or subaereal explosive volcanism. The Vuelta de Las Tolas Member tends to show an overall random facies patterns reflecting the strong influence of non-cyclical episodic processes related to arc volcanism and slope sedimentation. The scarcity of resident ichnofaunas and the presence of thick packages of uniform mudstones suggest deposition under oxygen-depleted conditions in a topographically confined, ponded sub-basin. Interbasinal correlations favor comparison with Middle Arenig slope-apron successions formed in the northern Puna Basin and suggest a southward prolongation of the Arenig volcanic arc.

Quantifying Channelized Submarine Depositional Systems From Bed to Basin Scale

DTIC Science & Technology

2004-09-01

Union of South Africa and South West Africa . Memoirs of the Geological Survey of South Africa , 39:177, 1944. C.D. Winker and J.R. Booth. Sedimentary ...overbank locations. Sedimentary structures, textures and facies preserved in core recovered from the Late Pliocene section of Fisk Basin are consistent...France or Tanqua, Karoo Basin, South Africa in Pickering et al. (1995)) falling well short of the desirable continuous regional exposure. As a result of

Influence of the Atlantic inflow and Mediterranean outflow currents on late Quaternary sedimentary facies of the Gulf of Cadiz continental margin

USGS Publications Warehouse

Nelson, C.H.; Baraza, J.; Maldonado, A.; Rodero, J.; Escutia, C.; Barber, J.H.

1999-01-01

The late Quaternary pattern of sedimentary facies on the Spanish Gulf of Cadiz continental shelf results from an interaction between a number of controlling factors that are dominated by the Atlantic inflow currents flowing southeastward across the Cadiz shelf toward the Strait of Gibraltar. An inner shelf shoreface sand facies formed by shoaling waves is modified by the inflow currents to form a belt of sand dunes at 10-20 m that extends deeper and obliquely down paleo-valleys as a result of southward down-valley flow. A mid-shelf Holocene mud facies progrades offshore from river mouth sources, but Atlantic inflow currents cause extensive progradation along shelf toward the southeast. Increased inflow current speeds near the Strait of Gibraltar and the strong Mediterranean outflow currents there result in lack of mud deposition and development of a reworked transgressive sand dune facies across the entire southernmost shelf. At the outer shelf edge and underlying the mid-shelf mud and inner shelf sand facies is a late Pleistocene to Holocene transgressive sand sheet formed by the eustatic shoreline advance. The late Quaternary pattern of contourite deposits on the Spanish Gulf of Cadiz continental slope results from an interaction between linear diapiric ridges that are oblique to slope contours and the Mediterranean outflow current flowing northwestward parallel to the slope contours and down valleys between the ridges. Coincident with the northwestward decrease in outflow current speeds from the Strait there is the following northwestward gradation of contourite sediment facies: (1) upper slope sand to silt bed facies, (2) sand dune facies on the upstream mid-slope terrace, (3) large mud wave facies on the lower slope, (4) sediment drift facies banked against the diapiric ridges, and (5) valley facies between the ridges. The southeastern sediment drift facies closest to Gibraltar contains medium-fine sand beds interbedded with mud. The adjacent valley floor facies is composed of gravelly, shelly coarse to medium sand lags and large sand dunes on the valley margins. By comparison, the northwestern drift contains coarse silt interbeds and the adjacent valley floors exhibit small to medium sand dunes of fine sand. Because of the complex pattern of contour-parallel and valley-perpendicular flow paths of the Mediterranean outflow current, the larger-scale bedforms and coarser-grained sediment of valley facies trend perpendicular to the smaller-scale bedforms and finer-grained contourite deposits of adjacent sediment drift facies. Radiocarbon ages verify that the inner shelf shoreface sand facies (sedimentation rate 7.1 cm/kyr), mid-shelf mud facies (maximum rate 234 cm/kyr) and surface sandy contourite layer of 0.2-1.2 m thickness on the Cadiz slope (1-12 cm/kyr) have deposited during Holocene time when high sea level results in maximum water depth over the Gibraltar sill and full development of the Atlantic inflow and Mediterranean outflow currents. The transgressive sand sheet of the shelf, and the mud layer underlying the surface contourite sand sheet of the slope, correlate, respectively, with the late Pleistocene sea level lowstand and apparent weak Mediterranean outflow current.

Lithostratigraphy, provenance and facies distribution of Archaean cratonic successions in western Kenya

NASA Astrophysics Data System (ADS)

Ngecu, Wilson M.; Gaciri, Steve J.

1995-10-01

The greenstone belt of the Tanzanian shield in Western Kenya is composed of two supracrustal successions, which form the Nyanzian and Kavirondian Groups. The Nyanzian Group at the base is composed of mafic tholeiitic basalts, calc-alkaline dacites and rhyolites. The group is unconformably overlain by the Kavirondian Group. During recent field mapping, the Kavirondian Group was divided into three formations. The Shivakala Formation consists of thickly bedded basal conglomerates, which are interbedded with thin sandstone beds. The Igukhu Formation conformably overlies the Shivakala Formation and is composed of thickly and locally thinly bedded greywacke. The uppermost Mudaa Formation is composed of blocky mudstones and thinly laminated shales. A high proportion of volcanic, granitic and chert pebbles in the conglomerates, along with abundant quartz, feldspars and mudstone fragments in the greywacke, indicates a mixed provenance of volcanic, granitic and recycled sedimentary rocks. Primary sedimentary structures and lithofacies associations indicate that the conglomerates were deposited in an alluvial fan/fan-delta setting. The greywackes represent proximal turbidites while the mudstone and shales were deposited mainly as distal turbidites. In the study area there is no evidence of transitional nearshore or shallow marine facies transitional to the continental and deep marine facies.

Sedimentology of the upper Karoo fluvial strata in the Tuli Basin, South Africa

NASA Astrophysics Data System (ADS)

Bordy, Emese M.; Catuneanu, Octavian

2001-08-01

The sedimentary rocks of the Karoo Supergroup in the Tuli Basin (South Africa) may be grouped in four stratigraphic units: the basal, middle and upper units, and the Clarens Formation. This paper presents the findings of the sedimentological investigation of the fluvial terrigenous clastic and chemical deposits of the upper unit. Evidence provided by primary sedimentary structures, palaeontological record, borehole data, palaeo-flow measurements and stratigraphic relations resulted in the palaeo-environmental reconstruction of the upper unit. The dominant facies assemblages are represented by sandstones and finer-grained sediments, which both can be interbedded with subordinate intraformational coarser facies. The facies assemblages of the upper unit are interpreted as deposits of a low-sinuosity, ephemeral stream system with calcretes and silcretes in the dinosaur-inhabited overbank area. During the deposition of the upper unit, the climate was semi-arid with sparse precipitation resulting in high-magnitude, low-frequency devastating flash floods. The current indicators of the palaeo-drainage system suggest flow direction from northwest to southeast, in a dominantly extensional tectonic setting. Based on sedimentologic and biostratigraphic evidence, the upper unit of the Tuli Basin correlates to the Elliot Formation in the main Karoo Basin to the south.

Sedimentary sequence evolution in a Foredeep basin: Eastern Venezuela

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bejarano, C.; Funes, D.; Sarzalho, S.

1996-08-01

Well log-seismic sequence stratigraphy analysis in the Eastern Venezuela Foreland Basin leads to study of the evolution of sedimentary sequences onto the Cretaceous-Paleocene passive margin. This basin comprises two different foredeep sub-basins: The Guarico subbasin to the west, older, and the Maturin sub-basin to the east, younger. A foredeep switching between these two sub-basins is observed at 12.5 m.y. Seismic interpretation and well log sections across the study area show sedimentary sequences with transgressive sands and coastal onlaps to the east-southeast for the Guarico sub-basin, as well as truncations below the switching sequence (12.5 m.y.), and the Maturin sub-basin showsmore » apparent coastal onlaps to the west-northwest, as well as a marine onlap (deeper water) in the west, where it starts to establish. Sequence stratigraphy analysis of these sequences with well logs allowed the study of the evolution of stratigraphic section from Paleocene to middle Miocene (68.0-12.0 m.y.). On the basis of well log patterns, the sequences were divided in regressive-transgressive-regressive sedimentary cycles caused by changes in relative sea level. Facies distributions were analyzed and the sequences were divided into simple sequences or sub- sequences of a greater frequencies than third order depositional sequences.« less

Sedimentology of SPICE (Steptoean positive carbon isotope excursion): A high-resolution trace fossil and microfabric analysis of the middle to late Cambrian Alum Shale Formation, southern Sweden

USGS Publications Warehouse

Egenhoff, Sven; Fishman, Neil; Ahlberg, Per; Maletz, Jorg; Jackson, Allison; Kolte, Ketki; Lowers, Heather; Mackie, James; Newby, Warren; Petrowsky, Matthew

2015-01-01

The Cambrian Alum Shale Formation in the Andrarum-3 core from Scania, southern Sweden, consists of black siliciclastic mudstone with minor carbonate intercalations. Four facies comprise three siliciclastic mudstones and one fine-grained carbonate. The facies reflect deposition along a transect from deep ramp to basin on a Cambrian shelf. The three mudstone facies contain abundant clay clasts and laterally variable siltstone laminae. Bed-load transport processes seem to have dominated deposition on this deep shelf. These sedimentary rocks record mainly event deposition, and only relatively few, thin laminae probably resulted from suspension settling. The Alum Shale Formation deep shelf did not show a bioturbation gradient, but fecal strings are common and Planolites burrows are rare in all mudstone facies. Evidence for biotic colonization indicates that this mudstone environment was not persistently anoxic, but rather was most likely intermittently dysoxic. The Alum Shale Formation in the Andrarum-3 core shows an overall decrease of grain size, preserved energy indicators, and carbonate content upsection interpreted to reflect a deepening upward. The succession can also be divided into four small-scale fining-upward cycles that represent deepening, and four overlying coarsening-upward cycles that represent upward shallowing.

Oil/source rock correlations in the Polish Flysch Carpathians and Mesozoic basement and organic facies of the Oligocene Menilite Shales: Insights from hydrous pyrolysis experiments

USGS Publications Warehouse

Curtis, John B.; Kotarba, M.J.; Lewan, M.D.; Wieclaw, D.

2004-01-01

The Oligocene Menilite Shales in the study area in the Polish Flysch Carpathians are organic-rich and contain varying mixtures of Type-II, Type-IIS and Type-III kerogen. The kerogens are thermally immature to marginally mature based on atomic H/C ratios and Rock-Eval data. This study defined three organic facies, i.e., sedimentary strata with differing hydrocarbon-generation potentials due to varying types and concentrations of organic matter. These facies correspond to the Silesian Unit and the eastern and western portions of the Skole Unit. Analysis of oils generated by hydrous pyrolysis of outcrop samples of Menilite Shales demonstrates that natural crude oils reservoired in the flysch sediments appear to have been generated from the Menilite Shales. Natural oils reservoired in the Mesozoic basement of the Carpathian Foredeep appear to be predominantly derived and migrated from Menilite Shales, with a minor contribution from at least one other source rock most probably within Middle Jurassic strata. Definition of organic facies may have been influenced by the heterogeneous distribution of suitable Menilite Shales outcrops and producing wells, and subsequent sample selection during the analytical phases of the study. ?? 2004 Elsevier Ltd. All rights reserved.

Sedimentary Parameters Controlling Occurrence and Preservation of Microbial Mats in Siliciclastic Depositional Systems

NASA Technical Reports Server (NTRS)

Noffke, Nora; Knoll, Andrew H.

2001-01-01

Shallow-marine, siliciclastic depositional systems are governed by physical sedimentary processes. Mineral precipitation or penecontemporaneous cementation play minor roles. Today, coastal siliciclastic environments may be colonized by a variety of epibenthic, mat-forming cyanobacteria. Studies on microbial mats showed that they are not randomly distributed in modern tidal environments. Distribution and abundancy is mainly function of a particular sedimentary facies. Fine-grained sands composed of "clear" (translucent) quartz particles constitute preferred substrates for cyanobacteria. Mat-builders also favor sites characterized by moderate hydrodynamic flow regimes, which permit biomass enrichment and construction of mat fabrics without lethal burial of mat populations by fine sediments. A comparable facies relationship can be observed in ancient siliciclastic shelf successions from the terminal Neoproterozoic Nama Group, Namibia. Wrinkle structures that record microbial mats are present but sparsely distributed in mid- to inner shelf sandstones of the Nudaus Formation. The sporadic distribution of these structures reflects both the narrow ecological window that governs mat development and the distinctive taphonomic conditions needed to preserve the structures. These observations caution that statements about changing mat abundance across the Proterozoic-Cambrian boundary must be firmly rooted in paleoenvironmental and taphonomic analysis. Understanding the factors that influence the formation and preservation of microbial structures in siliciclastic regimes can facilitate exploration for biological signatures in Earth's oldest rocks. Moreover, insofar as these structures can be preserved on bedding surfaces and are not easily mimicked by physical processes, they constitute a set of biological markers that can be searched for on Mars by remotely controlled rovers.

Upper Neoproterozoic-Lower Cambrian sedimentary successions in the Central Iberian Zone (Spain): sequence stratigraphy, petrology and chemostratigraphy. Implications for other European zones

NASA Astrophysics Data System (ADS)

Valladares, M. I.; Barba, P.; Ugidos, J. M.; Colmenero, J. R.; Armenteros, I.

The Upper Neoproterozoic-Lower Cambrian sedimentary succession in the central areas of the Central Iberian Zone has been subdivided into 12 mostly siliciclastic lithostratigraphic units, ranging in thickness between 1800 and 3900m. The lithology and facies of each unit are described and the facies associations are interpreted. The facies resulted mainly from turbidity currents and debris flows and, to a lesser extent, from submarine slides and traction flows. The facies associations suggest that sedimentation took place in slope and base-of-slope environments. Two depositional sequences are recognized, separated by a type-1 unconformity. The lower sequence is of Late Neoproterozoic age (units I-IV) and exhibits lowstand, transgressive, and highstand systems tracts. Most of the upper sequence is probably of Early Cambrian age (units V-XII). It begins at the base of unit V and possibly ends with the Tamames Limestone Formation. The upper sequence records a lowstand systems tract and minor-order sea-level oscillations. In the Cambrian units there are higher amounts of feldspar and smaller quantities of intrabasinal clasts than in the Neoproterozoic units. The modal data plot close to the Q-L and Qm-Lt sides of Q-F-L and Qm-F-Lt triangular diagrams, suggesting a provenance from a recycled orogen evolving into a provenance from a craton interior towards the top of the succession. The chemical results, based mainly on Al2O3, TiO2, Zr, and Nb abundances in shales from all the units, strongly suggest a gradual compositional change within this sedimentary succession. Together with the petrological data, the chemical results do not reveal any obvious coeval volcanic contribution to the sediments. On the basis of the chemical data, a comparison is made with other European zones containing detrital sediments composed of reworked crustal components.

A multi-factor approach for process-based seabed characterization: example from the northeastern continental margin of the Korean peninsula (East Sea)

NASA Astrophysics Data System (ADS)

Cukur, Deniz; Um, In-Kwon; Chun, Jong-Hwa; Kim, So-Ra; Lee, Gwang-Soo; Kim, Yuri; Kong, Gee-Soo; Horozal, Senay; Kim, Seong-Pil

2018-04-01

This study investigates sediment transport and depositional processes from a newly collected dataset comprising sub-bottom chirp profiles, multibeam bathymetry, and sediment cores from the northeastern continental margin of Korea in the East Sea (Japan Sea). Twelve echo-types and eleven sedimentary facies have been defined and interpreted as deposits formed by shallow-marine, hemipelagic sedimentation, bottom current, and mass-movement processes. Hemipelagic sedimentation, which is acoustically characterized by undisturbed layered sediments, appears to have been the primary sedimentary process throughout the study area. The inner and outer continental shelf (<150 m water depth) have been influenced by shallow-marine sedimentary processes. Two slope-parallel canyons, 0.2-2 km wide and up to 30 km long, appear to have acted as possible conduits for turbidity currents from the shallower shelf into the deep basins. Bottom current deposits, expressed as erosional moats immediately below topographic highs, are prevalent on the southern lower slope at water depths of 400-450 m. Mass-movements (i.e., slides/slumps, debris flow deposits) consisting of chaotic facies characterize the lower slope and represent one of the most important sedimentary processes in the study area. Piston cores confirm the presence of mass-transport deposits (MTDs) that are characterized by mud clasts of variable size, shape, and color. Multibeam bathymetry shows that large-scale MTDs are chiefly initiated on the lower slope (400-600 m) with gradients up to 3° and where they produce scarps on the order of 100 m in height. Sandy MTDs also occur on the upper continental slope adjacent to the seaward edge of the shelf terrace. Earthquakes associated with tectonic activity and the development of fluid overpressure is considered as the main conditioning factor for destabilizing the slope sediments. Overall, the sedimentary processes show typical characteristics of a fine-grained clastic slope apron and change down-slope and differ within each physiographic province. Furthermore, the influence of geological inheritance (i.e., structural folds and faults) on geomorphology and sediment facies development is an important additional factor on the lower slopes. Together, these factors provide a rational basis for continental margin seabed characterization.

Late Glacial and Holocene Climate Change in the subantarctic Auckland Islands

NASA Astrophysics Data System (ADS)

Gilmer, G.; Moy, C. M.; Vandergoes, M.; Gadd, P.; Riesselman, C. R.; Jacobsen, G. E.; Wilson, G. S.; Visinand, C.

2017-12-01

Situated within the core of the Southern Hemisphere westerly winds, and between the subtropical and subantarctic fronts, the New Zealand subantarctic islands are uniquely positioned to evaluate past ocean and atmospheric change in the middle to high southern latitudes. We collected a series of sediment cores from Auckland Island fjords to produce a high-resolution record of climate change following the Last Glacial Maximum. Physical property and organic geochemical data, Itrax XRF, and visual core descriptions indicate the cores capture several phases of sedimentation. From these studies, we identify four primary sedimentary facies: 1) a deglacial facies exhibiting mm-scale laminae defined by magnetic susceptibility and density contrasts and high counts of elements associated with terrigenous sources; 2) a lacustrine facies defined by very low density, high organic carbon concentrations and low counts of lithophilic elements; 3) a marine transgression facies with moderate density, moderate bioturbation and alternating marine and lacustrine sedimentary components; 4) a marine facies that contains biogenic carbonate. Radiocarbon results indicate deglacial sedimentation was underway in the basin by approximately 19,000 cal yr BP. Lacustrine deposition in ice-free conditions began around 15,600 cal yr BP and continued until marine transgression at approximately 9,500 cal yr BP. During the early Holocene between 11 and 9.5 ka, we observe elevated n-alkane δD values and an overall increase in redox-sensitive elements that signal a combination of warmer atmospheric temperatures and reduced westerly wind strength that drives fjord stratification. Poleward-shifted westerlies south of the Auckland Islands could accommodate these results, but there are few records to corroborate this interpretation. We will discuss these results within the context of developing New Zealand and subantarctic paleoclimate records in order to provide a more comprehensive record of past change.

Ichnological analysis of the Upper Miocene in the ANH-Tumaco-1-ST-P well: assessing paleoenvironmental conditions at the Tumaco Basin, in the Colombian Pacific

NASA Astrophysics Data System (ADS)

Giraldo-Villegas, Carlos A.; Celis, Sergio A.; Rodríguez-Tovar, Francisco J.; Pardo-Trujillo, Andrés; Vallejo-Hincapié, Diego F.; Trejos-Tamayo, Raúl A.

2016-11-01

Tumaco is a frontier basin located on the SW Colombian Pacific coast. It is composed of a thick siliciclastic sequence up to reach 10,000 m-thick. In recent years, the National Hydrocarbon Agency-ANH has promoted new exploration wells in order to understand the sedimentary dynamic and its relationship with petroleum systems. One of them, the ANH-Tumaco-1-ST-P well has ∼3000 m (12,000 feet). We carried out sedimentological, geochemical, and micropaleontological detailed analyses with special attention to the ichnology on a 55 m-cored interval (from 1695.3 to 1640.4 m = 5563-5382 ft) in order to assess paleoenvironmental conditions. Beds are composed of green and gray mudrocks interbedded with lithic sandstones and fine-grained tuffs. Calcareous microfossil assemblages defined by the recovery of Uvigerina carapitana, Uvigerina laviculata, Uvigerina pigmaea, Globigerina woodi, Globigerionoides obliquus, Discoaster bellus gr., Catinaster coalitus, Reticulofenestra pseudoumbilicus and Sphenolithus abies indicated a Tortonian age, between CN6/CN7 biozones. Six sedimentary facies were identified: (1, 2) massive and laminated mudrocks, (3, 4) massive and normal-graded sandstones, (5) heterolithic beds, and in some cases (6) sandstones with soft-deformation structures. These rocks were accumulated in a shallowing platform-prodelta environment with continuous volcanic influence. Ichnotaxonomic analysis, conducted for the first time in the Colombian Pacific, allowed the identification of eighteen ichnogenera: Alcyonidiopsis, Asterosoma, Chondrites, Conichnus, Cylindrichnus, Diplocraterion, Ophiomorpha, Palaeophycus, Phycosiphon, Planolites, Rhyzocorallium, Schaubcylindrichnus, Scolicia, Siphonichnus, Taeinidum, Teichichnus, Thalassinoides, and Zoophycos. The ichnological association belongs to the archetypal Cruziana ichnofacies and its "distal" expression. By integrating lithofacies and ichnological results, two segments have been distinguished: 1) the lower one (1695.3-1677.1 m) dominated by massive and laminated mudrocks and 1 to 6 ichnofabric indexes and, 2) the upper segment (1677.1-1640.4 m) characterized by the increase of the sandstone facies, and ichnofabric indexes from 1 to 5. Along these segments, four ichnofabrics have been identified: 1) Phycosiphon-Planolites, 2) Planolites-Thalassinoides, 3) Zoophycos-Chondrites, and 4) Phycosiphon-Thalassinoides, reflecting stable sedimentary conditions with low-moderate energy, low-moderate sedimentation rates, and dominant aerobic facies. Minor variations in these parameters (sedimentation rate, energy conditions, substrate consistency, oxygenation and organic matter), however, induced changes in the macrobenthic tracemaker community, and consequently in the registered trace fossil assemblages.

Deposition of sedimentary organic matter in black shale facies indicated by the geochemistry and petrography of high-resolution samples, blake nose, western North Atlantic

USGS Publications Warehouse

Barker, C.E.; Pawlewicz, M.; Cobabe, E.A.

2001-01-01

A transect of three holes drilled across the Blake Nose, western North Atlantic Ocean, retrieved cores of black shale facies related to the Albian Oceanic Anoxic Events (OAE) lb and ld. Sedimentary organic matter (SOM) recovered from Ocean Drilling Program Hole 1049A from the eastern end of the transect showed that before black shale facies deposition organic matter preservation was a Type III-IV SOM. Petrography reveals that this SOM is composed mostly of degraded algal debris, amorphous SOM and a minor component of Type III-IV terrestrial SOM, mostly detroinertinite. When black shale facies deposition commenced, the geochemical character of the SOM changed from a relatively oxygen-rich Type III-IV to relatively hydrogen-rich Type II. Petrography, biomarker and organic carbon isotopic data indicate marine and terrestrial SOM sources that do not appear to change during the transition from light-grey calcareous ooze to the black shale facies. Black shale subfacies layers alternate from laminated to homogeneous. Some of the laminated and the poorly laminated to homogeneous layers are organic carbon and hydrogen rich as well, suggesting that at least two SOM depositional processes are influencing the black shale facies. The laminated beds reflect deposition in a low sedimentation rate (6m Ma-1) environment with SOM derived mostly from gravity settling from the overlying water into sometimes dysoxic bottom water. The source of this high hydrogen content SOM is problematic because before black shale deposition, the marine SOM supplied to the site is geochemically a Type III-IV. A clue to the source of the H-rich SOM may be the interlayering of relatively homogeneous ooze layers that have a widely variable SOM content and quality. These relatively thick, sometimes subtly graded, sediment layers are thought to be deposited from a Type II SOM-enriched sediment suspension generated by turbidities or direct turbidite deposition.

Geology of the Blue Mountains region of Oregon, Idaho, and Washington; stratigraphy, physiography, and mineral resources of the Blue Mountains region

USGS Publications Warehouse

Vallier, T. L.; Brooks, H.C.

1994-01-01

PART 1: Stratigraphic and sedimentological analysis of sedimentary sequences from the Wallowa terrane of northeastern Oregon has provided a unique insight into the paleogeography and depositional history of the terrane, as well as establishing important constraints on its tectonic evolution and accretionary history. Its Late Triassic history is considered here by examining the two most important sedimentary units in the Wallowa terrane-the Martin Bridge Limestone and the Hurwal Formation. Conformably overlying epiclastic volcanic rocks of the Seven Devils Group, the Martin Bridge Limestone comprises shallow-water platform carbonate rocks and deeper water, off-platform slope and basin facies. Regional stratigraphic and tectonic relations suggest that the Martin Bridge was deposited in a narrow, carbonate-dominated (forearc?) basin during a lull in volcanic activity. The northern Wallowa platform was a narrow, rimmed shelf delineated by carbonate sand shoals. Interior parts of the shelf were characterized by supratidal to shallow subtidal carbonates and evaporites, which were deposited in a restricted basin. In the southern Wallowa Mountains, lithofacies of the Martin Bridge are primarily carbonate turbidites and debris flow deposits, which accumulated on a carbonate slope apron adjacent to the northern Wallowa rimmed shelf from which they were derived. Drowning of the platform in the latest Triassic, coupled with a renewed influx of volcanically derived sediments, resulted in the progradation of fine-grained turbidites of the Hurwal Formation over the carbonate platform. Within the Hurwal, Norian conglomerates of the Excelsior Gulch unit contain exotic clasts of radiolarian chert, which were probably derived from the Bakei terrane. Such a provenance provides evidence of a tectonic link between the Baker and Wallowa terranes as early as the Late Triassic, and offers support for the theory that both terranes were part of a more extensive and complex Blue Mountains island-arc terrane. PART 2: Mesozoic rocks exposed along the Snake River in the northern Wallowa terrane represent a volcanic island and its associated sedimentary basins within the Blue Mountains island arc of Washington, Oregon, and Idaho. In the northern part of the Wallowa terrane, rock units include the Wild Sheep Creek, Doyle Creek, and Coon Hollow Formations, the (informal) Imnaha intrusion, and the (informal) Dry Creek stock. The volcanic rocks of the Ladinian to Karnian Wild Sheep Creek Formation show two stages of evolution-an early dacitic phase Gower volcanic faciesY and a late mafic phase (upper volcanic facies). The two volcanic facies are separated by eruption-generated turbidites of siliceous argillites and arkosic arenites (argillitesandstone facies). The two magmatic phases of the Wild Sheep Creek Formation may be recorded by the compositional zoning from older quartz diorite and diorite to younger gabbro in the Imnaha intrusion. Although the Late Triassic Imnaha intrusion is in fault contact with the Wild Sheep Creek Formation, it may be a subduction-related pluton and was the likely magma source for the Wild Sheep Creek Formation. Interbedded with the upper volcanic facies are eruption-generated turbidite and debris flow deposits (sandstone-breccia facies) and thick carbonate units (limestone facies). The limestone facies consists of two marker units, which may represent carbonate platform environments. Clast imbrication, fossil orientation, and cross-stratification in the Wild Sheep Creek Formation indicate a shoaling to subaerial volcanic island to the south and southeast; sediment was transported to the north and northwest. The Karnian Doyle Creek Formation consists largely of epiclastic conglomerate, sandstone, and shale that were deposited in welloxygenated basins. Vitric tuffs interbedded with these sediments suggest shallow or subaerial pyroclastic eruptions. Quartz diorite clasts in this formation may indicate uplift

Variations in eruptive style and depositional processes of Neoproterozoic terrestrial volcano-sedimentary successions in the Hamid area, North Eastern Desert, Egypt

NASA Astrophysics Data System (ADS)

Khalaf, Ezz El Din Abdel Hakim

2013-07-01

Two contrasting Neoproterozoic volcano-sedimentary successions of ca. 600 m thickness were recognized in the Hamid area, Northeastern Desert, Egypt. A lower Hamid succession consists of alluvial sediments, coherent lava flows, pyroclastic fall and flow deposits. An upper Hamid succession includes deposits from pyroclastic density currents, sills, and dykes. Sedimentological studies at different scales in the Hamid area show a very complex interaction of fluvial, eruptive, and gravitational processes in time and space and thus provided meaningful insights into the evolution of the rift sedimentary environments and the identification of different stages of effusive activity, explosive activity, and relative quiescence, determining syn-eruptive and inter-eruptive rock units. The volcano-sedimentary deposits of the study area can be ascribed to 14 facies and 7 facies associations: (1) basin-border alluvial fan, (2) mixed sandy fluvial braid plain, (3) bed-load-dominated ephemeral lake, (4) lava flows and volcaniclastics, (5) pyroclastic fall deposits, (6) phreatomagmatic volcanic deposits, and (7) pyroclastic density current deposits. These systems are in part coeval and in part succeed each other, forming five phases of basin evolution: (i) an opening phase including alluvial fan and valley flooding together with a lacustrine period, (ii) a phase of effusive and explosive volcanism (pulsatory phase), (iii) a phase of predominant explosive and deposition from base surges (collapsing phase), and (iv) a phase of caldera eruption and ignimbrite-forming processes (climactic phase). The facies architectures record a change in volcanic activity from mainly phreatomagmatic eruptions, producing large volumes of lava flows and pyroclastics (pulsatory and collapsing phase), to highly explosive, pumice-rich plinian-type pyroclastic density current deposits (climactic phase). Hamid area is a small-volume volcano, however, its magma compositions, eruption styles, and inter-eruptive breaks suggest, that it closely resembles a volcanic architecture commonly associated with large, composite volcanoes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soltanian, Mohamad Reza; Sun, Alexander; Dai, Zhenxue

Yucca Mountain, Nevada, had been extensively investigated as a potential deep geologic repository for storing high-level nuclear wastes. Previous field investigations of stratified alluvial aquifer downstream of the site revealed that there is a hierarchy of sedimentary facies types. There is a corresponding log conductivity and reactive surface area subpopulations within each facies at each scale of sedimentary architecture. Here in this paper, we use a Lagrangian-based transport model in order to analyze radionuclide dispersion in the saturated alluvium of Fortymile Wash, Nevada. First, we validate the Lagrangian model using high-resolution flow and reactive transport simulations. Then, we used themore » validated model to investigate how each scale of sedimentary architecture may affect long-term radionuclide transport at Yucca Mountain. Results show that the reactive solute dispersion developed by the Lagrangian model matches the ensemble average of numerical simulations well. The link between the alluvium spatial variability and reactive solute dispersion at different spatiotemporal scales is demonstrated using the Lagrangian model. Finally, the longitudinal dispersivity of the reactive plume can be on the order of hundreds to thousands of meters, and it may not reach its asymptotic value even after 10,000 years of travel time and 2–3 km of travel distance.« less

Quaternary alluvial deposits of Wadi Gaza in the middle of the Gaza Strip (Palestine): Facies, granulometric characteristics, and their paleoflow direction

NASA Astrophysics Data System (ADS)

Ubeid, Khalid Fathi

2016-06-01

The Quaternary rocks of the Gaza Strip mainly consist of clastic sedimentary rocks. In Wadi Gaza, the outcropping rocks consist of brownish fine-grained deposits, sandstones, and conglomerates. The deposits have been studied from a genetic point of view, and six facies have been described: (i) graded clast-supported conglomerates, (ii) cross-bedded clast-supported conglomerates, (iii) sandy matrix conglomerates, (iv) cross-laminated medium-grained sandstones, (v) graded coarse-grained sandstones, and (vi) massive sandstones. The field work observations and granulometric analysis show that the sphericity of the grains increase toward the west, where its value ranges from ∼0.64 in the east to ∼0.70 in the west. In addition, the grain forms tend to be disc shape in the east, whereas they tend to be disc-to spheroid shape in the west, and they become well rounded to well sorted toward the west. Moreover, the features, geometry, and spatial relationship among these facies suggest that the Wadi Gaza was meandering wadi fed from Beir Sheva and the Northern Negev in the southeast of Gaza Strip through Wadi Al Shallala and Wadi Sheneq and from Hebron mountains in the West Bank at the east through Wadi Al Shari'a alluvials. Within the Gaza Strip, paleocurrent data ranges from 210° to 310°, indicating a mean a paleoflow direction to the W (276°) and a median value about 275°. The sedimentary rocks in the Wadi Gaza are considered to be deposited in two periods of climate conditions: the coarse-grained rocks were deposited during the period of wet condition before 12.4 ka age, whereas the eolinite fine-grained rocks were deposited during semiarid climate conditions which are younger in age than 12.4 ka.

Reconstructing the Holocene depositional environments along the northern coast of Sfax (Tunisia): Mineralogical and sedimentological approaches

NASA Astrophysics Data System (ADS)

Lamourou, Ali; Touir, Jamel; Fagel, Nathalie

2017-05-01

A sedimentological and mineralogical study of sedimentary cores allowed reconstructing the evolution of depositional environments along the Northern coast of Sfax (Tunisia). The aim of this research work is to identify the factors controlling the sedimentation from the Holocene to the Present time. Three 30-m sediment cores collected by drilling at 30 m water depth were analyzed for their color, magnetic susceptibility signal, grain size by laser diffraction, organic matter content by loss of ignition, carbonate content by calcimetry and mineralogy by X-ray diffraction on bulk powder and clay <2 μm. They broadly present the same sedimentological and mineralogical features. Microscopical observations of petrographic slides allowed identifying six main sedimentary facies. Bulk mineralogical assemblages comprised clay minerals, quartz, calcite, gypsum and K-feldspars were examined. Considerable change was observed in the carbonate content that mimicked the bioclaste abundance and diluted the detrital minerals (clay minerals, quartz and feldspars). The gypsum mainly occurred in the lower sedimentary columns (SC12 and SC9) and in the upper/middle of core SC6. The clay fraction was made of a mixture of kaolinite, illite, smectite and palygorskite with no clear variation through core depth. Both grain-size parameters and magnetic susceptibility profile showed a sharp transition in the upper 2-5 m of the sedimentological columns. Coarse, sandy to gravely sediments characterized by a low magnetic susceptibility signal were replaced by fine bioclastic-rich clayey sediments. The analysis of vertical succession of depositional facies revealed a fluvial depositional environment (coastal plain) basically marked by fluvial channels and inundation plains at the bottom of all cores. However, core-top sediments recorded a littoral marine environment with sand depositions rich in gastropods, lamellibranches and algæ. Depositional facies, sedimentological and mineralogical parameters were consistent with a transition from a fluviatile depositional environment with some emersion phases marked by the gypsum precipitation, to a marine littoral environment. Such evolution was accompanied with a relative sea-level rise which flooded the fluvial system at the coastal plain during the Holocene, in agreement with sea-level fluctuations in southeast Tunisia during the Holocene.

Modern sedimentary facies, depositional environments, and major controlling processes on an arid siliciclastic coast, Al qahmah, SE Red Sea, Saudi Arabia

NASA Astrophysics Data System (ADS)

Nabhan, Abdullah I.; Yang, Wan

2018-04-01

The facies and environments along the arid siliciclastic coast of Red Sea in Al Qahmah, Saudi Arabia are studied to establish a depositional model for interpretation of ancient rocks deposited in rift settings. Field and petrographic studies of 151 sediment samples in an area of 20 km2 define seven main facies types: beach, washover fan, tidal channel, dune, sabkha, delta, and wadi (seasonal stream). The wadi and delta facies are composed of poorly to moderately well-sorted, gravelly, medium-to-fine sands. Delta-front sands are redistributed by southward longshore currents to form a beach. Beach facies is composed of well-to-moderately sorted fine sands with minor gravels, which contain high concentrations of magnetite, ilmenite, garnet, pyroxene, amphibole, epidote, titanite, and apatite grains, indicating strong winnowing. Crabs and other burrowers destroy primary sedimentary structures and mix sediments in foreshore and backshore of the beaches. Wind and storm surge rework foreshore and backshore sediments to form washover fans. Sabkha facies occurs extensively in supratidal depressions behind beach, are flooded by rainstorms and spring tide, and capped by a 5-cm-thick crust composed of interlaminated halite, quartz, albite, minor gypsum and biotite, and rarely calcium carbonate. Halite occurs as thin sheets and gypsum as nodules with a chicken-wire structure. Clastic fraction in sabkha sediments ranges from coarse silt to coarse sand with moderate sorting, and is transported by currents and wind. Tidal inlets and tidal creeks assume abandoned wadis and are filled by muddy sand. Sand dunes and sand sheets are 1-7 m high and widely distributed due to variable wind directions. Fine-grained dune sands are moderately well sorted, whereas sheet sands are coarser and poorly sorted due to vegetation baffling. Most eolian sands are sourced from beach deposits. This suite of complex riverine, wave, tidal, wind, chemical, and biological processes form the facies mosaic along the arid Al Qahmah coast, which is strongly affected by climate-driven evaporation and wind action.

UAV, DGPS, and Laser Transit Mapping of Microbial Mat Ecosystems on Little Ambergris Cay, B.W.I.

NASA Astrophysics Data System (ADS)

Stein, N.; Quinn, D. P.; Grotzinger, J. P.; Fischer, W. W.; Knoll, A. H.; Cantine, M.; Gomes, M. L.; Grotzinger, H. M.; Lingappa, U.; Metcalfe, K.; O'Reilly, S. S.; Orzechowski, E. A.; Riedman, L. A.; Strauss, J. V.; Trower, L.

2016-12-01

Little Ambergris Cay is a 6 km long, 1.6 km wide uninhabited island on the Caicos platform in the Turks and Caicos. Little Ambergris provides an analog for the study of microbial mat development in the sedimentary record. Recent field mapping during July of 2016 used UAV- and satellite-based images, differential GPS (DGPS), and total station theodolite (TST) measurements to characterize sedimentology and biofacies across the entirety of Little Ambergris Cay. Nine facies were identified in-situ during DGPS island transects including oolitic grainstone bedrock, sand flats, cutbank and mat-filled channels, hardground-lined bays with EPS-rich mat particles, mangroves, EPS mats, polygonal mats, and mats with blistered surface texture. These facies were mapped onto a 15 cm/pixel visible light orthomosaic of the island generated from more than 1500 nadir images taken by a UAV at 350 m standoff distance. A corresponding stereogrammetric digital elevation map was generated from drone images and 910 DGPS measurements acquired during several island transects. More than 1000 TST measurements provide additional facies elevation constraints, control points for satellite-based water depth calculations, and means to cross-calibrate and reconstruct the topographic profile of bedrock exposed at the beach. Additionally, the thickness of the underlying Holocene sediment fill was estimated over several island transects using a depth probe. Sub-cm resolution drone-based orthophotos of microbial mats were used to quantify polygonal mat size and textures. The mapping results highlight that sedimentary and bio-facies (including mat morphology and fabrics) correlate strongly with elevation. Notably, mat morphology was observed to be highly sensitive to cm-scale variations in topography and water depth. The productivity metric NDVI was computed for mat and vegetation facies using nadir images from a UAV-mounted two-band red-NIR camera. In combination with in situ facies mapping, these measurements provided ground truth for reduction of multispectral Landsat and Worldview-2 satellite images to evaluate mat distribution and diversity across a range of spatial and spectral facies variations.

Late Pleistocene and Holocene sedimentary facies on the Ebro continental shelf

USGS Publications Warehouse

Diaz, J.; Nelson, C.H.; Barber, J.H.; Giro, S.

1990-01-01

Late Pleistocene-Holocene history of the Ebro continental shelf of northeastern Spain is recorded in two main sedimentary units: (1) a lower, transgressive unit that covers the shelf and is exposed on the outer shelf south of 40??40???N, and (2) an upper, progradational, prodeltaic unit that borders the Ebro Delta and extends southward along the inner shelf. The lower transgressive unit includes a large linear shoal found at a water depth of 90 m and hardground mounds at water depths of 70-80 m. Some patches of earlier Pleistocene prodelta mud remain also, exposed or covered by a thin veneer of transgressive sand on the northern outer shelf. This relict sand sheet is 2-3 m thick and contains 9000-12,500 yr old oyster and other shells at water depths of 78-88 m. The upper prodelta unit covers most of the inner shelf from water depths of 20-80 m and extends from the present Ebro River Delta to an area to the southwest where the unit progressively thins and narrows. Interpretation of high-resolution seismic reflection data shows the following facies occurring progressively offshore: (1) a thick stratified facies with thin progradational "foresets beds", (2) a faintly laminated facies with sparse reflectors of low continuity, and (3) a thin transparent bottomset facies underlain by a prominent flat-lying reflector. Deposition in the northern half of the prodelta began as soon as the shoreline transgressed over the mid-shelf, but progradation of the southern half did not begin until about 1000-3000 yrs after the transgression. A classic deltaic progradational sequence is shown in the Ebro prodelta mud by (1) gradation of seismic facies away from the delta, (2) coarsening-upward sequences near the delta and fining-upward sequences in the distal mud belt deposits, and (3) thin storm-sand layers and shell lags in the nearshore stratified facies. The boundaries of the prodeltaic unit are controlled by increased current speeds on the outer shelf (where the shelf narrows) and by development of the shoreface sand body resulting from shoaling waves on the inner shelf. ?? 1990.

Lithofacies and seismic-reflection interpretation of temperate glacimarine sedimentation in Tarr Inlet, Glacier Bay, Alaska

USGS Publications Warehouse

Cai, J.; Powell, R.D.; Cowan, E.A.; Carlson, P.R.

1997-01-01

High-resolution seismic-reflection profiles of sediment fill within Tart Inlet of Glacier Bay, Alaska, show seismic facies changes with increasing distance from the glacial termini. Five types of seismic facies are recognized from analysis of Huntec and minisparker records, and seven lithofacies are determined from detailed sedimentologic study of gravity-, vibro- and box-cores, and bottom grab samples. Lithofacies and seismic facies associations, and fjord-floor morphology allow us to divide the fjord into three sedimentary environments: ice-proximal, iceberg-zone and ice-distal. The ice-proximal environment, characterized by a morainal-bank depositional system, can be subdivided into bank-back, bank-core and bank-front subenvironments, each of which is characterized by a different depositional subsystem. A bank-back subsystem shows chaotic seismic facies with a mounded surface, which we infer consists mainly of unsorted diamicton and poorly sorted coarse-grained sediments. A bank-core depositional subsystem is a mixture of diamicton, rubble, gravel, sand and mud. Seismic-reflection records of this subsystem are characterized by chaotic seismic facies with abundant hyperbolic diffractions and a hummocky surface. A bank-front depositional subsystem consists of mainly stratified and massive sand, and is characterized by internal hummocky facies on seismic-reflection records with significant surface relief and sediment gravity flow channels. The depositional system formed in the iceberg-zone environment consists of rhythmically laminated mud interbedded with thin beds of weakly stratified diamicton and stratified or massive sand and silt. On seismic-reflection profiles, this depositional system is characterized by discontinuously stratified facies with multiple channels on the surface in the proximal zone and a single channel on the largely flat sediment surface in the distal zone. The depositional system formed in the ice-distal environment consists of interbedded homogeneous or laminated mud and massive or stratified sand and coarse silt. This depositional system shows continuously stratified seismic facies with smooth and flat surfaces on minisparker records, and continuously stratified seismic facies which are interlayered with thin weakly stratified facies on Huntec records.

Sedimentary Framework of an Inner Continental Shelf Sand-Ridge System, West-Central Florida

NASA Astrophysics Data System (ADS)

Locker, S. D.; Hine, A. C.; Wright, A. K.; Duncan, D. S.

2002-12-01

The west-central Florida inner continental shelf is a dynamic environment subject to current flows on a variety of temporal and spatial scales. A site survey program, undertaken in support of the Office of Naval Research's Mine Burial prediction program, is focused on the sedimentary framework and sediment accumulation patterns in 10-18 meters water depth. Our specific goals are to image the shallow subsurface and to monitor changes in bedform distribution patterns that coincide with physical processes studies ongoing in the area. Methods of study include side-scan sonar imaging, boomer and chirp subbottom profiling, and sedimentary facies analysis using surface sediment sampling and vibracoring. A well-defined sand-ridge system was imaged, trending oblique to the west-Florida coastline. The side-scan clearly shows that there is extensive three-dimensional structure within these large-scale NW-SE trending sedimentary bedforms. The sand ridges commonly are approximately 1 km wide and 4-8 km in length. The characteristics of these ridges are distinctly different than the sand ridges in < 8 m water that we have previously studied. Ridges in the offshore area tend to be thicker, have a flatter morphology, and exhibit fewer smaller-scale sand waves. Sand-ridge thickness ranges 2-3 meters, and typically consists of fining upward medium to fine quartz sand facies with occasional centimeter-scale coarser-grained carbonate-rich intervals. Time series investigations tracking the shift in position of the sand ridge margins have found undetectable net annual movement. However significant resuspension and bedform development accompanies high-energy events such as winter cold front passage. Thus the large-scale bedforms (sand ridges) are in a state of dynamic equilibrium with the average annual hydrodynamic regime. Repeated field surveys will focus on monitoring small-scale sedimentological and stratal framework changes that will be integrated with the quantitative process studies.

The stratigraphic distribution of large marine vertebrates and shell beds in the Pliocene of Tuscany

NASA Astrophysics Data System (ADS)

Dominici, Stefano; Benvenuti, Marco; Danise, Silvia

2015-04-01

The record of 337 shark fossils, 142 cetaceans and 10 sea cows from the Pliocene of Tuscany, mostly from historical museum collections, is revised. The majority of these fossils are concentrated at a few geographic sites from separated hinterland basins, on the South-Western side of the Northern Apennines. To better understand the meaning of these concentrations, the sequence stratigraphic distribution of more recent findings of large marine vertebrates is reconstructed against a high-resolution framework based on sedimentary facies analysis. These remains are usually covered by, or included in mudstones deposited far from the coast (N=12), skeletons being usually articulated, slightly displaced, and often bioeroded. A minor part of better preserved articulated skeletons is associated with sandstones from deltaic paleonenvironments (N=2). Marine mammal and shark remains may be associated with laterally-continuous shell accumulations, a type of concentration occurring at maximum flooding surfaces, separating relatively coarse-grained facies from open marine mudstones. Shell beds were bulk-sampled at 66 locations from six basins, covering a wide range of sedimentary facies, and spanning a chronologic interval of about 2.5 million years. A dataset of 62,655 mollusc specimens belonging to 496 species formed the basis of a statistical study to reconstruct the structure of the benthic communities, and to estimate paleodepths from intertidal to upper bathyal settings. Mollusc associations closely mirror the distribution of sedimentary facies, allowing for a fine tuning of the sequence stratigraphic architecture. Merging paleogeographic, stratigraphic and paleoecologic data, we conclude that the more abundant and diverse accumulations of large vertebrates took place in settings under the influence of coastal upwelling. A modern analogue occurs today in the Ligurian Sea, on the Tuscan offshore, where abundant nutrients carried by deep-marine currents of Western origin, within an otherwise oligotrophic Mediterranean Sea, sustain a rich and diverse cetacean and shark, epipelagic and mesopelagic community. The modern steep bathymetric gradient was displaced towards the East during the Pliocene, before the latest phases of uplift of the Northern Apennines. An open marine, nutrient-rich ecosystem influenced hinterland basins during major transgressive pulses, leading to a higher productivity and the formation of laterally-continuos accumulations of biogenic hard parts. A comparison with the few available studies on the sequence-stratigraphic distribution of large marine vertebrates and shell beds suggests that a model integrating high-productivity and sea level rise, favouring bone bed and shell bed formation, can be applied at other settings, and other geologic intervals.

Nonpoint Source Solute Transport Normal to Aquifer Bedding in Heterogeneous, Markov Chain Random Fields

NASA Astrophysics Data System (ADS)

Zhang, H.; Harter, T.; Sivakumar, B.

2005-12-01

Facies-based geostatistical models have become important tools for the stochastic analysis of flow and transport processes in heterogeneous aquifers. However, little is known about the dependency of these processes on the parameters of facies- based geostatistical models. This study examines the nonpoint source solute transport normal to the major bedding plane in the presence of interconnected high conductivity (coarse- textured) facies in the aquifer medium and the dependence of the transport behavior upon the parameters of the constitutive facies model. A facies-based Markov chain geostatistical model is used to quantify the spatial variability of the aquifer system hydrostratigraphy. It is integrated with a groundwater flow model and a random walk particle transport model to estimate the solute travel time probability distribution functions (pdfs) for solute flux from the water table to the bottom boundary (production horizon) of the aquifer. The cases examined include, two-, three-, and four-facies models with horizontal to vertical facies mean length anisotropy ratios, ek, from 25:1 to 300:1, and with a wide range of facies volume proportions (e.g, from 5% to 95% coarse textured facies). Predictions of travel time pdfs are found to be significantly affected by the number of hydrostratigraphic facies identified in the aquifer, the proportions of coarse-textured sediments, the mean length of the facies (particularly the ratio of length to thickness of coarse materials), and - to a lesser degree - the juxtapositional preference among the hydrostratigraphic facies. In transport normal to the sedimentary bedding plane, travel time pdfs are not log- normally distributed as is often assumed. Also, macrodispersive behavior (variance of the travel time pdf) was found to not be a unique function of the conductivity variance. The skewness of the travel time pdf varied from negatively skewed to strongly positively skewed within the parameter range examined. We also show that the Markov chain approach may give significantly different travel time pdfs when compared to the more commonly used Gaussian random field approach even though the first and second order moments in the geostatistical distribution of the lnK field are identical. The choice of the appropriate geostatistical model is therefore critical in the assessment of nonpoint source transport.

Relation between grain size and modal composition in deep-sea gravity-flow deposits. Example from the Voirons Flysch (Gurnigel nappe, Chablais Prealps, France)

NASA Astrophysics Data System (ADS)

Ragusa, Jérémy; Kindler, Pascal

2016-04-01

A coupled analysis of modal composition, grain size and sedimentary features of gravity-flow deposits in the Gurnigel nappe shows that the transition from coarse proximal to fine distal deposits is accompanied by a change in composition from siliciclastic to calcareous. Such compositional variation should be taken into account when interpretating deep-sea deposits if sampling is restricted to a single part of the fan. The Chablais Prealps (Haute-Savoie, France) represent a well-preserved accretionary wedge in the Western Alps. They comprise a stack of northward-thrusted sedimentary cover nappes originating from the Ultrahelvetic realm (distal part of the European margin) to the southern part of the Piemont Ocean. The present study focuses on the Voirons Flysch, belonging to the Gurnigel nappe, which includes four formations consisting of gravity-flow deposits (from bottom to top): (1) the Voirons Sandstone Fm., composed of channel to lobe deposits; (2) the Vouan Conglomerate Fm., represented by the proximal part of a channel system; (3) the Boëge Marls Fm., constituted by distal lobe deposits; finally, (4) the Bruant Sandstone Fm., which consists in channel to lobe deposits. Recent biostratigraphic results using planktonic foraminifers attributed a Middle to Late Eocene age to the Voirons Flysch, which was formerly believed to range from the Paleocene to the Middle Eocene (based on calcareous nannofossils). A total of 270 thin sections with stained feldspars were prepared, representing the four formations of the Voirons Flysch. Circa 300 extrabasinal grains were counted per thin section using the classic Indiana method. In addition, the quantity of intrabasinal grains (i.e. bioclasts, glauconite), cement and porosity was analysed. Cement was stained with alizarine and potassium ferrocyanide. 200 grain-size measurements on ca. 100 samples were performed using 3D conversion and statistical moment analysis. Sedimentary observations for each sampled bed were categorized following Mutti's turbiditic facies scheme. Cluster analysis on the composition of major grains discriminated 10 clusters which are merged into seven petrofacies (P1 - P7) following optical observations under the microscope: P1: poorly cemented porous arenite; P2: all porosity are filled by calcitic cement; P3: well-cemented volcano-clastic arenite; P4: red algae-rich highly cemented arenite to calcarenite; P5: highly cemented arenite; P6: globigerina-rich laminated calcarenite and P7: glauconitic quartzarenite. Grain-size distribution is grouped following the petrofacies. They provide a homogeneous distribution within each petrofacies with a gradual fining and progressively increasing sorting from P1 to P7. Moreover, Mutti's facies distribution indicates a progressive change towards more distal environments: from channel facies (F2 to F5) in P1-P3 to lobe facies (F8 to F9) in P4-P6. The washed composition of the P7 petrofacies is interpreted as distal turbidites that were reworked by bottom currents. The results presented here reveal a link between sand composition, grain size and gravity-flow facies. They highlight that composition of gravity flows is modified during their basinward transport. Consequently, coarse proximal deposits are more siliciclastic with limited filling of voids due to low carbonate contents. On the contrary, carbonate content increases significantly in the fine-grained calcarenites of the distal petrofacies. In distal settings, the segregation of light and porous foraminifera from the heavier siliciclastic fraction occurs under the increasing importance of traction currents.

Comparison of clay mineral stratigraphy to other proxy palaeoclimate indicators in the Mesozoic of NW Europe.

PubMed

Ruffell, Alastair; McKinley, Jennifer M; Worden, Richard H

2002-04-15

This paper reviews the opportunities and pitfalls associated with using clay mineralogical analysis in palaeoclimatic reconstructions. Following this, conjunctive methods of improving the reliability of clay mineralogical analysis are reviewed. The Mesozoic succession of NW Europe is employed as a case study. This demonstrates the relationship between clay mineralogy and palaeoclimate. Proxy analyses may be integrated with clay mineralogical analysis to provide an assessment of aridity-humidity contrasts in the hinterland climate. As an example, the abundance of kaolinite through the Mesozoic shows that, while interpretations may be difficult, the Mesozoic climate of NW Europe was subject to great changes in rates of continental precipitation. We may compare sedimentological (facies, mineralogy, geochemistry) indicators of palaeoprecipitation with palaeotemperature estimates. The integration of clay mineralogical analyses with other sedimentological proxy indicators of palaeoclimate allows differentiation of palaeoclimatic effects from those of sea-level and tectonic change. We may also observe how widespread palaeoclimate changes were; whether they were diachronous or synchronous; how climate, sea level and tectonics interact to control sedimentary facies and what palaeoclimate indicators are reliable.

Stratigraphy, structure, and lithofacies relationships of Devonian through Permian sedimentary rocks: Paradox Basin and adjacent areas - southeastern Utah. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCleary, J.; Rogers, T.; Ely, R.

Geophysical well log analysis, literature review, and field work were conducted to develop isopach, structure contour, outcrop, and facies maps and cross sections for the Devonian through Permian strata of a 14,586-km/sup 2/ (5632-square-mile) area in southeastern Utah. The study area includes part of the Paradox Basin, the salt deposits of which are of interest in siting studies for a nuclear waste repository. For this reason hydrologic models of this area are needed. This study, part of which included the development of a three-dimensional stratigraphic computer model utilizing Geographic Information System software, can serve as a base for hydrologic ormore » other models for this area. Within and adjacent to the study area, 730 wells were screened to select the 191 wells analyzed for the study. It was found that the Elbert through Molas formations did not exhibit noticeable facies changes within the study area. The Pinkerton Trail Formation exhibits moderate changes: anhydrite and shale become somewhat more abundant toward the northeast. Facies changes in the Paradox Formation are more dramatic. Thick saline facies deposits are present in the northeast, grading to thinner anhydrite and then to carbonate facies in the south and west. The lithology of the Honaker Trail Formation appears to be fairly uniform throughout the area. Facies changes in the Cutler Group are numerous and sometimes dramatic, and generally correspond to the named formations of the group. Other factors that could affect groundwater flow, such as stratigraphic cover of fine-grained rocks, area of formation outcrops, and fracturing and faulting are discussed and delineated on maps.« less

Paleofacies of Eocene Lower Ngimbang Source Rocks in Cepu Area, East Java Basin based on Biomarkers and Carbon-13 Isotopes

NASA Astrophysics Data System (ADS)

Devi, Elok A.; Rachman, Faisal; Satyana, Awang H.; Fahrudin; Setyawan, Reddy

2018-02-01

The Eocene Lower Ngimbang carbonaceous shales are geochemically proven hydrocarbon source rocks in the East Java Basin. Sedimentary facies of source rock is important for the source evaluation that can be examined by using biomarkers and carbon-13 isotopes data. Furthermore, paleogeography of the source sedimentation can be reconstructed. The case study was conducted on rock samples of Lower Ngimbang from two exploration wells drilled in Cepu area, East Java Basin, Kujung-1 and Ngimbang-1 wells. The biomarker data include GC and GC-MS data of normal alkanes, isoprenoids, triterpanes, and steranes. Carbon-13 isotope data include saturate and aromatic fractions. Various crossplots of biomarker and carbon-13 isotope data of the Lower Ngimbang source samples from the two wells show that the source facies of Lower Ngimbang shales changed from transitional/deltaic setting at Kujung-1 well location to marginal marine setting at Ngimbang-1 well location. This reveals that the Eocene paleogeography of the Cepu area was composed of land area in the north and marine setting to the south. Biomarkers and carbon-13 isotopes are powerful data for reconstructing paleogeography and paleofacies. In the absence of fossils in some sedimentary facies, these geochemical data are good alternatives.

Critical Dynamics of Gravito-Convective Mixing in Geological Carbon Sequestration

PubMed Central

Soltanian, Mohamad Reza; Amooie, Mohammad Amin; Dai, Zhenxue; Cole, David; Moortgat, Joachim

2016-01-01

When CO2 is injected in saline aquifers, dissolution causes a local increase in brine density that can cause Rayleigh-Taylor-type gravitational instabilities. Depending on the Rayleigh number, density-driven flow may mix dissolved CO2 throughout the aquifer at fast advective time-scales through convective mixing. Heterogeneity can impact density-driven flow to different degrees. Zones with low effective vertical permeability may suppress fingering and reduce vertical spreading, while potentially increasing transverse mixing. In more complex heterogeneity, arising from the spatial organization of sedimentary facies, finger propagation is reduced in low permeability facies, but may be enhanced through more permeable facies. The connectivity of facies is critical in determining the large-scale transport of CO2-rich brine. We perform high-resolution finite element simulations of advection-diffusion transport of CO2 with a focus on facies-based bimodal heterogeneity. Permeability fields are generated by a Markov Chain approach, which represent facies architecture by commonly observed characteristics such as volume fractions. CO2 dissolution and phase behavior are modeled with the cubic-plus-association equation-of-state. Our results show that the organization of high-permeability facies and their connectivity control the dynamics of gravitationally unstable flow. We discover new flow regimes in both homogeneous and heterogeneous media and present quantitative scaling relations for their temporal evolution. PMID:27808178

Genesis and sedimentary record of blind channel and islands of the anabranching river: An evolution model

NASA Astrophysics Data System (ADS)

Leli, Isabel T.; Stevaux, José C.; Assine, Mário L.

2018-02-01

Blind channel (BC) is a fluvial feature formed by attachment of a lateral sand bar to an island or riverbank. It consists of a 10- to 20-m wide and hundreds to thousands meters long channel, parallel to the island or bank, closed at its upstream end by accretion to the island. It is an important feature in anabranching rivers that plays an important role in both the island formation and river ecology. This paper discusses the formation processes, functioning, evolution, and the sedimentary record of a blind channel, related landforms, and its context on island development in the Upper Paraná River. The evolution of this morphologic feature involves (1) formation of a lateral or attachment bar beside an island with the development of a channel in between; (2) vertical accretion of mud deposits during the flood and vegetal development on the bar; (3) the upstream channel closure that generates the blind channel; and (4) annexation of the blind channel to the island. A blind channel is semilotic to lentic, that is not totally integrated to the dynamics of the main active channel and that acts as a nursery for fingerlings and macrophytes. The sedimentary facies succession of BCs are relatively simple and characterized by cross-stratified sand covered by organic muddy sediments. Based on facies analysis of 12 cores, we identified a succession of environments that contribute to the formation of islands: channel bar, blind channel, pond, and swamp. Blind channel formation and its related bar-island attachment are relevant processes associated with the growing of large island evolution in some anabranching rivers.

Palaeoredox conditions and sequence stratigraphy of the Cretaceous storm-dominated, mixed siliciclastic-carbonate ramp in the Eastern Cordillera Basin (Colombia): Evidence from sedimentary geochemical proxies and facies analysis

NASA Astrophysics Data System (ADS)

Rivera, Huber A.; Le Roux, Jacobus P.; Sánchez, L. Katherine; Mariño-Martínez, Jorge E.; Salazar, Christian; Barragán, J. Carolina

2018-10-01

The Cretaceous black shales of Colombia are among the most important successions in the north of South America and have attracted the attention of many geoscientists and exploration companies over the last few decades, because of their high hydrocarbon potential and the presence of emerald deposits. However, many uncertainties still remain with regard to their tectonic setting, sequence stratigraphy, depositional environments, palaeoxygenation conditions, and organic matter preservation. In order to develop a more integrated picture of these different processes and conditions, we conducted a detailed sedimentological, inorganic geochemical (U, V, Ni, Zn, Mn, Fe, Ti, Mo, Cu, Cr, Cd, Ba) and sequence stratigraphic analysis of the Cretaceous black shales in the Magdalena-Tablazo Sub-Basin (Eastern Cordillera Basin) of Colombia. Eleven lithofacies and five lithofacies associations of a storm-dominated, siliciclastic-carbonate ramp were identified, which range from basin to shallow inner ramp environments. These facies were grouped into six third-order stratigraphic sequences showing high-order cycles of marine transgression with constrained regressive pulses during the late Valanginian to early Coniacian. The black shales succession represents deposition under anoxic bottom water with some intervals representing dysoxic-suboxic conditions. The evolution of the sedimentary environments and their palaeoxygenation history reflect tectonic and eustatic sea-level controls that 1) produced a variable orientation and position of the coastline throughout the Cretaceous; 2) conditioned the low-gradient ramp geometry (<0.3°) and 3) modified the oxygenation conditions in the Magdalena-Tablazo Sub-Basin. An improved understanding of the sedimentary setting during deposition of the Cretaceous black shales in the Magdalena-Tablazo Sub-Basin assists in highlighting the interplay between the mechanism of sedimentation and continuum anoxic conditions prevailing in a basin, as well the important role of nutrient input from continental runoff as a trigger of high productivity and extended anoxia conditions.

Facies analysis of the Balta Formation: Evidence for a large late Miocene fluvio-deltaic system in the East Carpathian Foreland

NASA Astrophysics Data System (ADS)

Matoshko, Anton; Matoshko, Andrei; de Leeuw, Arjan; Stoica, Marius

2016-08-01

Deposits of the Balta Fm are preserved in a large arcuate sediment body that covers about 60,000 km2 and is up to 350 m thick. The Balta Fm spans ca. 5 Ma as constrained by underlying Tortonian (Bessarabian) and overlying Messinian (early Pontian) Paratethys strata. It contains frequent terrestrial mammal fossils and fresh- as well as brackish-water (Paratethys) molluscs and ostracods. Over the past 140 years our understanding of the sedimentary architecture of the formation and its origins has remained in its infancy, which has limited insight into the evolution of the East Carpathian Foreland. Here, we provide the first modern sedimentary facies analysis of the Balta Fm, which is integrated with an extensive review of previously published local literature. It is supported with micropalaeontological results and a wealth of historical borehole information. We show that the Balta Fm has a tripartite vertical division. Its lowermost part is clay dominated and consists of subordinate delta front sand bodies interspersed between muds. The middle unit contains separate delta plain channels or channel belts encased in thick muds. These are overlain by a unit with amalgamated delta plain channel deposits with only minor amounts of associated mud. The abundance of upper flow regime sedimentary structures in channel sands, the absence of peats (or coals) and the presence of calcareous nodules suggest a strongly seasonal and relatively dry climate with a flashy discharge regime. Deposition of the Balta Fm in an area previously characterized by distal shelf and prodelta environments indicates large-scale progradation triggered by high sediment volume from the uplifting Carpathian Orogen and enhanced by a general lowering of Paratethys sea-level. The tripartite internal architecture of the Balta Fm indicates that progradation continued during deposition. Its wedge-shaped geometry suggests that tectonic activity in the Carpathians generated a 300 km wide foreland basin that allowed for significant delta-plain aggradation despite of the generally regressive trend in Paratethys sea-level.

Late quaternary geologic framework, north-central Gulf of Mexico

USGS Publications Warehouse

Kindinger, Jack G.; Penland, Shea; Williams, S. Jeffress; Brooks, Gregg R.; Suter, John R.; McBride, Randolph A.

1991-01-01

The geologic framework of the north-central Gulf of Mexico shelf is composed of multiple, stacked, delta systems. Shelf and nearshore sedimentary facies were deposited by deltaic progradation, followed by shoreface erosion and submergence. A variety of sedimentary facies has been identified, including prodelta, delta fringe, distributary, lagoonal, barrier island, and shelf sand sheet. This study is based on the interpretation and the synthesis of > 6,700 km of high-resolution seismic profiles, 75 grab samples, and 77 vibracores. The nearshore morphology, shallow stratigraphy, and sediment distribution of the eastern Louisiana shelf are the products of transgressive sedimentary processes reworking the abandoned St. Bernard delta complex. Relatively recent Mississippi delta lobe consists primarily of fine sand, silt, and clay. In the southern portion of the St. Bernard delta complex, asymmetrical sand ridges (>5 m relief) have formed as the result of marine reworking of distributary mouth-bar sands. Silty sediments from the modern Mississippi Birdsfoot delta onlap the St. Bernard delta complex along the southern edge. The distal margin of the St. Bernard complex is distinct and has a sharp contact on the north near the Mississippi Sound barrier island coastline and a late Wisconsinan delta to the south. The Chandeleur Islands and the barrier islands of Mississippi Sound have been formed by a combination of Holocene and Pleistocene fluvial processes, shoreface erosion, and ravinement of the exposed shelf. Sediments underlying the relatively thin Holocene sediment cover are relict fluvial sands, deposited during the late Wisconsinan lowstand. Subsequent relative sea-level rise allowed marine processes to rework and redistribute sediments that formed the nearshore fine-grained facies and the shelf sand sheet.

Sedimentary record of erg migration

NASA Astrophysics Data System (ADS)

Porter, M. L.

1986-06-01

The sedimentary record of erg (eolian sand sea) migration consists of an idealized threefold division of sand-sea facies sequences. The basal division, here termed the fore-erg, is composed of a hierarchy of eolian sand bodies contained within sediments of the flanking depositional environment. These sand bodies consist of eolian strata deposited by small dune complexes, zibars, and sand sheets. The fore-erg represents the downwind, leading edge of the erg and records the onset of eolian sedimentation. Basin subsidence coupled with erg migration places the medial division, termed the central erg, over the fore-erg strata. The central erg, represented by a thick accumulation of large-scale, cross-stratified sandstone, is the product of large draa complexes. Eolian influence on regional sedimentation patterns is greatest in the central erg, and most of the sand transported and deposited in the erg is contained within this region. Reduction in sand supply and continued erg migration will cover the central-erg deposits with a veneer of back-erg deposits. This upper division of the erg facies sequence resembles closely the fore-erg region. Similar types of eolian strata are present and organized in sand bodies encased in sediments of the upwind flanking depositional environment(s). Back-erg deposits may be thin due to limited eolian influence on sedimentation or incomplete erg migration, or they may be completely absent because of great susceptibility to postdepositional erosion. Tectonic, climatic, and eustatic influences on sand-sea deposition will produce distinctive variations or modifications of the idealized erg facies sequence. The resulting variants in the sedimentary record of erg migration are illustrated with ancient examples from western North America, Europe, southern Africa, and South America.

Sedimentary environment and diagenesis of the Lower Cretaceous Chaswood Formation, southeastern Canada: The origin of kaolin-rich mudstones

NASA Astrophysics Data System (ADS)

Pe-Piper, Georgia; Dolansky, Lila; Piper, David J. W.

2005-07-01

The Lower Cretaceous fluvial sandstone-mudstone succession of the Chaswood Formation is the proximal equivalent of offshore deltaic rocks of the Scotian Basin that are reservoirs for producing gas fields. This study interprets the mineralogical consequences of Cretaceous weathering and early diagenesis in a 130-m core from the Chaswood Formation in order to better understand detrital and diagenetic minerals in equivalent rocks offshore. Mineralogy was determined by X-ray diffraction, electron microprobe analysis and scanning electron microscopy. The rocks can be divided into five facies associations: light gray mudstone, dark gray mudstone, silty mudstone and muddy sandstone, sorted sandstone and conglomerate, and paleosols. Facies transitions in coarser facies are related to deposition in and near fluvial channels. In the mudstones, they indicate an evolutionary progression from the dark gray mudstone facies association (swamps and floodplain soils) to mottled paleosols (well-drained oxisols and ultisols following syntectonic uplift). Facies transitions and regional distribution indicate that the light gray mudstone facies association formed from early diagenetic oxidation and alteration of the dark gray mudstone facies association, probably by meteoric water. Principal minerals in mudstones are illite/muscovite, kaolinite, vermiculite and quartz. Illite/muscovite is of detrital origin, but variations in abundance show that it has altered to kaolinite in the light gray mudstone facies association and in oxisols. Vermiculite developed from the weathering of biotite and is present in ultisols. The earliest phase of sandstone cementation in reducing conditions in swamps and ponds produced siderite nodules and framboidal pyrite, which were corroded and oxidized during subsequent development of paleosols. Kaolinite is an early cement, coating quartz grains and as well-crystallized, pore-filling booklets that was probably synchronous with the formation of the light gray mudstone facies association. Later illite and barite cement indicate a source of abundant K and Ba from formation water. This late diagenesis of sandstone took place when the Chaswood Formation was in continuity with the main Scotian Basin, prior to Oligocene uplift of the eastern Scotian Shelf. Findings of this study are applicable to other mid-latitude Cretaceous weathering and early diagenetic environments.

Fluid-flow, diagenesis and generation of secondary porosity-permeability in the Cretaceous Jandaira Formation, Brazil - an analogue of karstified carbonate reservoirs

NASA Astrophysics Data System (ADS)

Bezerra, F. H.; Cazarin, C. L.; Srivastava, N. K.

2017-12-01

This study investigates the diagenetic processes that generated secondary porosity-permeability in carbonates. Our study area is the Jandaira Formation, a post-rift unit, 50-700 m thick, which occurs over an area of 70 x 260 km in the Potiguar Basin, Equatorial margin of Brazil. The Jandaira Formation formed in the Turonian-Campanian and is the major exposed Cretaceous carbonate platform in the eastern continental margin of South America. Little folding and nearly flat-lying layers characterize this unit. We used a multidisciplinary approach, which included drone imagery, petrographic, petrophysical, petrological, and structural studies. Our results indicate that several levels of dissolution occurred in mudstone, grainstone, and wackestone facies along faults, fractures, and bedding planes. Fracture and faults provided vertical leaching pathways and sedimentary bedding provided horizontal pathways of increased secondary porosity and permeability. Dissolution resulted in a multi-scale karst system that could reach voids 5 m wide and 1 km long. Dissolution mostly affect the dolomitized sedimentary facies in the form of vugular, moldic, interparticular, and intercrystalline porosity. It also generated a new modified facies that we defined as karstified facies. Dissolution increased permeability in carbonate rocks from primary values of 0.0-0.94 mD to as much as 1370.11 mD. Micritization, lixiviation of evaporites, meteoric water infiltration and dolomitization during late diagenesis could have triggered dissolution processes. The Jandaira Formation serves as an analog of fractured and karstified carbonate reservoirs, where faults, joints, and bedding acted as pathways of high permeability.

Sedimentology and ichnology of two Lower Triassic sections in South China: Implications for the biotic recovery following the end-Permian mass extinction

NASA Astrophysics Data System (ADS)

Luo, Mao; George, Annette D.; Chen, Zhong-Qiang

2016-09-01

Biotic recovery following the end-Permian mass extinction was investigated using trace fossil and facies analysis of two Lower-Middle Triassic sections in South China. The Susong section (Lower Yangtze Sedimentary Province) comprises a range of carbonate and mudstone facies that record overall shallowing from offshore to intertidal settings. The Tianshengqiao section (Upper Yangtze Sedimentary Province) consists of mixed carbonate and siliciclastic facies deposited in shallow marine to offshore settings. Griesbachian to Dienerian ichnological records in both sections are characterized by low ichnodiversity, low ichnofabric indices (1-2) and low bedding plane bioturbation indices (1-2). Higher ichnofabric indices (3 and 4), corresponding to a dense population of diminutive ichnotaxon, in the Tianshengqiao section suggest opportunistic infaunal biotic activity during the earliest Triassic. Ichnological data from the Susong section show an increase in ichnodiversity during the late Smithian with 11 ichnogenera identified and increased ichnofabric indices of 4-5 and bedding plane bioturbation indices of 3-5. Although complex traces such as Rhizocorallium are present in Spathian-aged strata in this section, low ichnodiversity and ichnofabric indices and diminutive Planolites suggest a decline in recovery. In the Tianshengqiao section, ichnofabric indices are moderate to high (3-5) although only six ichnogenera are present and Planolites burrows are consistently small in Smithian and Spathian strata. Complex traces, such as large Rhizocorallium and Thalassinoides, and large Planolites, did not appear until the Anisian. Ichnological results from both sections record the response of organisms to unfavourable environmental conditions although the Susong section shows earlier recovery during the Smithian prior to latest Smithian-Spathian decline. This decline may have resulted from a resurgence of euxinic to anoxic marine environment in various regions of South China. Ichnological data from the Tianshengqiao section indicate protracted recovery throughout the Early Triassic as previously found elsewhere in South China. Comparison of the South China trace fossil records with global ichnological data show a diachronous pattern of recovery of trace makers and highlights the heterogeneous development of oxic facies on the marked variation in recovery rate.

Llandovery green/grey and black mudrock facies of the northern Holy Cross Mountains (Poland) and their relation to early Silurian sea-level changes and benthic oxygen level

NASA Astrophysics Data System (ADS)

Trela, Wiesław; Podhalańska, Teresa; Smolarek, Justyna; Marynowski, Leszek

2016-08-01

The Llandovery mudrock facies in the northern Holy Cross Mountains reveal lithological variability allowing their interpretation in the context of post-Ordovician climate and sea-level changes in the Caledonian foredeep basin developed along the present SW margin of Baltica. They form a succession up to 50 m thick made up of grey and greenish clayey mudstones interrupted by black shales. The sedimentary and geochemical data (total organic carbon, pyrite framboids and trace metals) clearly show that the black shales document periods of the significant sediment starvation and oxygen- deficient conditions. Their occurrence is confined to the persculptus-acuminatus, vesiculosus, cyphus, convolutus-sedgwickii, turriculatus-crispus, crenulata and spiralis graptolite biozones and they can be correlated with post-glacial transgressions. In contrast, the grey and greenish mudstones are interpreted as lithofacies reflecting permanent benthic oxygenation driven by deep-water ventilation during the Aeronian and Telychian regressions supported by sedimentary and geochemical studies, and diameters of pyrite framboids

Detailed facies analysis of the Upper Cretaceous Tununk Shale Member, Henry Mountains Region, Utah: Implications for mudstone depositional models in epicontinental seas

NASA Astrophysics Data System (ADS)

Li, Zhiyang; Schieber, Juergen

2018-02-01

Lower-Middle Turonian strata of the Tununk Shale Member of the greater Mancos Shale were deposited along the western margin of the Cretaceous Western Interior Seaway during the Greenhorn second-order sea level cycle. In order to examine depositional controls on facies development in this mudstone-rich succession, this study delineates temporal and spatial relationships in a process-sedimentologic-based approach. The 3-dimensional expression of mudstone facies associations and their stratal architecture is assessed through a fully integrative physical and biologic characterization as exposed in outcrops in south-central Utah. Sedimentologic characteristics from the millimeter- to kilometer-scale are documented in order to fully address the complex nature of sediment transport mechanisms observed in this shelf muddy environment. The resulting facies model developed from this characterization consists of a stack of four lithofacies packages including: 1) carbonate-bearing, silty and sandy mudstone (CSSM), 2) silt-bearing, calcareous mudstone (SCM), 3) carbonate-bearing, silty mudstone to muddy siltstone (CMS), and 4) non-calcareous, silty and sandy mudstone (SSM). Spatial and temporal variations in lithofacies type and sedimentary facies characteristics indicate that the depositional environments of the Tununk Shale shifted in response to the 2nd-order Greenhorn transgressive-regressive sea-level cycle. During this eustatic event, the Tununk shows a characteristic vertical shift from distal middle shelf to outer shelf (CSSM to SCM facies), then from outer shelf to inner shelf environment (SCM to CMS, and to SSM facies). Shifting depositional environments, as well as changes in dominant paleocurrent direction throughout this succession, indicate multiple source areas and transport mechanisms (i.e. longshore currents, offshore-directed underflows, storm reworking). This study provides a rare documentation of the Greenhorn cycle as exposed across the entire shelf setting. High-resolution mapping of genetically-related packages facilitate the development of process-based depositional models that can be utilized for lateral correlations into the equivalent foredeep strata of the Cretaceous Interior.

Palaeoenvironmental implication of grain-size compositions of terrace deposits on the western Chinese Loess Plateau

NASA Astrophysics Data System (ADS)

Liu, Xingxing; Sun, Youbin; Vandenberghe, Jef; Li, Ying; An, Zhisheng

2018-06-01

Sedimentary sequences that developed on river terraces have been widely investigated to reconstruct high-resolution palaeoclimatic changes since the last deglaciation. However, frequent changes in sedimentary facies make palaeoenvironmental interpretation of grain-size variations relatively complicated. In this paper, we employed multiple grain-size parameters to discriminate the sedimentary characteristics of aeolian and fluvial facies in the Dadiwan (DDW) section on the western Chinese Loess Plateau. We found that wind and fluvial dynamics have quite different impacts on the grain-size compositions, with distinctive imprints on the distribution pattern. By using a lognormal distribution fitting approach, two major grain-size components sensitive to aeolian and fluvial processes, respectively, were distinguished from the grain-size compositions of the DDW terrace deposits. The fine grain-size component (GSC2) represents mixing of long-distance aeolian and short-distance fluvial inputs, whilst the coarse grain-size component (GSC3) is mainly transported by wind from short-distance sources. Thus GSC3 can be used to infer the wind intensity. Grain-size variations reveal that the wind intensity experienced a stepwise shift from large-amplitude variations during the last deglaciation to small-amplitude oscillations in the Holocene, corresponding well to climate changes from regional to global context.

Reactive transport in the complex heterogeneous alluvial aquifer of Fortymile Wash, Nevada

DOE PAGES

Soltanian, Mohamad Reza; Sun, Alexander; Dai, Zhenxue

2017-04-02

Yucca Mountain, Nevada, had been extensively investigated as a potential deep geologic repository for storing high-level nuclear wastes. Previous field investigations of stratified alluvial aquifer downstream of the site revealed that there is a hierarchy of sedimentary facies types. There is a corresponding log conductivity and reactive surface area subpopulations within each facies at each scale of sedimentary architecture. Here in this paper, we use a Lagrangian-based transport model in order to analyze radionuclide dispersion in the saturated alluvium of Fortymile Wash, Nevada. First, we validate the Lagrangian model using high-resolution flow and reactive transport simulations. Then, we used themore » validated model to investigate how each scale of sedimentary architecture may affect long-term radionuclide transport at Yucca Mountain. Results show that the reactive solute dispersion developed by the Lagrangian model matches the ensemble average of numerical simulations well. The link between the alluvium spatial variability and reactive solute dispersion at different spatiotemporal scales is demonstrated using the Lagrangian model. Finally, the longitudinal dispersivity of the reactive plume can be on the order of hundreds to thousands of meters, and it may not reach its asymptotic value even after 10,000 years of travel time and 2–3 km of travel distance.« less

Sedimentology and palaeontology of upper Karoo aeolian strata (Early Jurassic) in the Tuli Basin, South Africa

NASA Astrophysics Data System (ADS)

Bordy, Emese M.; Catuneanu, Octavian

2002-08-01

The Karoo Supergroup in the Tuli Basin (South Africa) consists of a sedimentary sequence composed of four stratigraphic units, namely the Basal, Middle and Upper units, and Clarens Formation. The units were deposited in continental settings from approximately Late Carboniferous to Middle Jurassic. This paper focuses on the Clarens Formation, which was examined in terms of sedimentary facies and palaeo-environments based on evidence provided by primary sedimentary structures, palaeo-flow measurements and palaeontological findings. Two main facies associations have been identified: (i) massive and large-scale planar cross-bedded sandstones of aeolian origin; and (ii) horizontally and cross-stratified sandstones of fluvial origin. Most of the sandstone lithofacies of the Clarens Formation were generated as transverse aeolian dunes produced by northwesterly winds in a relatively wet erg milieu. Direct evidence of aquatic subenvironments comes from local small ephemeral stream deposits, whereas palaeontological data provide indirect evidence. Fossils of the Clarens Formation include petrified logs of Agathoxylon sp. wood type and several trace fossils which were produced by insects and vertebrates. The upper part of the Clarens Formation lacks both direct and indirect evidence of aquatic conditions, and this suggests aridification that led to the dominance of dry sand sea conditions.

Recent benthic foraminifera assemblages from mangrove swamp and channels of Abu Dhabi (UAE)

NASA Astrophysics Data System (ADS)

Fiorini, Flavia; Lokier, Stephen W.; Odeh, Weaam A. S. Al; Paul, Andreas; Song, Jianfeng; Freeman, Mark; Michel, Françoise

2017-04-01

Zonation of Recent mangrove environments can be defined using benthic foraminifera, however, little is known about foraminifera from mangrove environments of the Persian/Arabian Gulf. The objective of this study is to produce a detailed micropaleontological and sedimentological analysis to identify foraminiferal associations from mangrove swamps and channels located on the eastern side of Abu Dhabi Island (UAE). Detailed sediment sampling collection in mangal environments of Eastern Abu Dhabi was carried out to assess the distribution of benthic foraminifera in different sedimentary facies in the mangal and in the surrounding natural environments of the upper and lower intertidal area (mud flats and channels). A 100 m transect across a natural channel in a mangal on the eastern side of Abu Dhabi Island was sampled in detail for sedimentological and foraminiferal analysis. Forty-seven samples were collected at 2 meter intervals along the transect in a number of different sedimentary facies including; fine sediment in areas exposed during low tide and close to mangrove trees (Avicennia marina), fine sediment rich in leaf material, coarse sediment in channels, and coarse sediments with a shell lag. At each sampling location environmental parameters were recorded, including water depth, salinity, temperature and pH. Samples collected for foraminiferal analysis were stained in rose Bengal in order to identify living specimens. Samples collected on the mud flat at the margin of the channel show a living foraminiferal assemblage characterised by abundant foraminifera belonging to the genera Ammonia, Elphidium, Cribroelphidium, Triloculina, Quinqueloculina, Sigmoilinita, Spiroloculina, Peneroplis and Spirolina. Samples collected in the lower (wet) intertidal area close to Avicennia marina roots, presented a low-diversity assemblage mostly comprising small-sized opportunistic foraminifera of the genera Ammonia and Cribroelphidium along with rare Triloculina and Quinqueloculina. Samples from the upper intertidal areas (often dry) close to Avicennia marina roots and leaf material, produced an assemblage exclusively composed of small-sized opportunistic Ammonia and Cribroelphidium, together with abundant specimensof agglutinated foraminifera belonging to the genera Trochammina. The samples collected in the higher energy settings (channels) were rich in foraminiferal tests, rare living forms were found in the coarser grained facies. The more abundant genera of foraminifera in these facies were miliolids belonging to the genera Triloculina, Quinqueloculina, Sigmoilina and epiphytic larger benthic foraminifera belonging to the genera Peneroplis, Spirolina and Sorites. The distribution of Recent benthic foraminifera from the mangrove environments of the Abu Dhabi region present a powerful tool for constructing a zonation of marine coastline environments and can be employed as a modern analogue for interpreting the depositional environment of ancient coastline sediments.

Petrology, sedimentology and stratigraphic implications of Black Dragon Member of the Triassic Moenkopi Formation, San Rafael Swell, Utah

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, M.A.; Ochs, S.

1990-01-01

Deposition was partly controlled by paleotopographic relief of underlying Permian strata. Triassic Black Dragon sediments filled lowlands on an erosion surface (unconformity) cut into the Permian White Rim Sandstone and Kaibab Limestone. The Black Dragon Member consists of four distinct facies containing a wide variety of sedimentary structures that characterize both fluvial and tidal environments. The facies are: (1) a Chert Pebble Conglomerate (CPC) facies, characterized by calcite-cemented channel-fills of nodular and banded chert pebbles; (2) an Interbedded Sandstone, Siltstone, and Shale (SSS) facies, containing oscillation ripples and flaser bedding; (3) a large-scale Trough Cross-Stratified Sandstone (TXS) facies, consisting ofmore » 6.6-13.1 ft (2-4 m) thick sets of fine- to medium-grained sandstone; and (4) an Oolitic and Algal Limestone (OAL) facies, with cross-stratified oolitic beds, fenestral fabric, and laminated algal rip-up clasts. The CPC facies and the TXS facies were deposited by braided streams when the shoreline lay west of the San Rafael Swell. Rivers drained off and eroded localized Permian highlands, located most likely within a 62 mi (100 km) distance to the south and southeast of the study area. The SSS facies which constitutes the bulk of the Black Dragon Member, and the OAL facies are inter- and supratidal deposits formed during relative sea level highstands, when the shoreline lay within or east of the San Rafael Swell. A decrease in continent-derived sand supply and a corresponding increase in carbonate production within the OAL facies characterizes the end of Black Dragon deposition and the gradation into the overlying Sinbad Limestone Member.« less

Stratigraphy and sedimentology of the Mid-Cretaceous deposits of the Yukon-Koyukuk Basin, west central Alaska

NASA Astrophysics Data System (ADS)

Nilsen, Tor H.

1989-11-01

The northeast trending Yukon-Koyukuk basin of west central Alaska consists of two subbasins, the Kobuk-Koyukuk subbasin to the north and east and the Lower Yukon subbasin to the southwest. The subbasins are separated by an arcuate Lower Cretaceous volcanic pile, the Hogatza trend, which is thought to be an accreted volcanic arc. The oldest part of the sedimentary fill of the subbasins consists of Valanginian to lower Albian(?) volcaniclastic rocks deposited on the flanks of the Hogatza trend. Following subsidence of the Hogatza trend, mid-Cretaceous clastic sedimentary strata of mainly Albian and Cenomanian age, and possibly as thick as 8000 m, were shed into the basin; these deposits were derived from surrounding uplands or borderlands in the Seward Peninsula to the west, the Brooks Range to the north, and the Ruby geanticline to the southeast. These mid-Cretaceous basin fill deposits can be divided into four main facies: (1) basin margin conglomerate facies, chiefly alluvial fan deposits that were transported basinward and rest in part unconformably on the surrounding uplands; (2) shelf facies, chiefly cross-stratified and hummocky cross-stratified sandstone deposited by wave-generated currents on a shelf that rimmed the basin on its western and northern margins; (3) deltaic facies, chiefly sandstone and shale deposited in delta plain and delta front environments on a large constructional delta that prograded westward from the eastern basin margin across both subbasins and across the subsided southern part of the Hogatza trend; and (4) turbidite facies, chiefly interbedded sandstone and shale deposited as elongate deep-sea fans and related deep-sea clastic systems by flows that transported sediment to the axial parts of both subbasins, northeastward in the Lower Yukon subbasin and eastward to southward in the Kobuk-Koyukuk subbasin. Sedimentation appears to have ended in the Santonian, followed by uplift, folding, and faulting of the basin fill. Less deformed, lower Tertiary nonmarine volcanic and volcaniclastic rocks unconformably overlie the more highly deformed Cretaceous strata.

Critical dynamics of gravito-convective mixing in geological carbon sequestration

DOE PAGES

Soltanian, Mohamad Reza; Amooie, Mohammad Amin; Dai, Zhenxue; ...

2016-11-03

When CO 2 is injected in saline aquifers, dissolution causes a local increase in brine density that can cause Rayleigh-Taylor-type gravitational instabilities. Depending on the Rayleigh number, density-driven flow may mix dissolved CO 2 throughout the aquifer at fast advective time-scales through convective mixing. Heterogeneity can impact density-driven flow to different degrees. Zones with low effective vertical permeability may suppress fingering and reduce vertical spreading, while potentially increasing transverse mixing. In more complex heterogeneity, arising from the spatial organization of sedimentary facies, finger propagation is reduced in low permeability facies, but may be enhanced through more permeable facies. The connectivitymore » of facies is critical in determining the large-scale transport of CO 2-rich brine. We perform high-resolution finite element simulations of advection-diffusion transport of CO 2 with a focus on facies-based bimodal heterogeneity. Permeability fields are generated by a Markov Chain approach, which represent facies architecture by commonly observed characteristics such as volume fractions. CO 2 dissolution and phase behavior are modeled with the cubic-plus-association equation-of-state. Our results show that the organization of high-permeability facies and their connectivity control the dynamics of gravitationally unstable flow. Lastly, we discover new flow regimes in both homogeneous and heterogeneous media and present quantitative scaling relations for their temporal evolution.« less

Palynological and sedimentary analysis of the Igarapé Ipiranga and Querru 1 outcrops of the Itapecuru Formation (Lower Cretaceous, Parnaíba Basin), Brazil

NASA Astrophysics Data System (ADS)

Ferreira, Neila N.; Ferreira, Elizabete P.; Ramos, Renato R. C.; Carvalho, Ismar S.

2016-03-01

The siliciclastic sediments of the Itapecuru Formation occur in a large area of the Parnaíba Basin and its deposits crop out along the Itapecuru River, in Maranhão State, northern Brazil. The palynological analysis of the Igarapé Ipiranga and Querru 1 outcrops strata yields a rich and diversified data. The presence of index-palynofloras in assemblages allows the identification of the Complicatisaccus cearensis Zone, of Late Aptian-Early Albian age. Terrestrial palynomorphs are abundant in the assemblages, being represented by bryophytes and pteridophytes, especially perisporate trilete spores (Crybelosporites and Perotrilites), and gymnosperms and angiosperms (Afropollis and Elaterosporites). The composition of palynological assemblages suggests the presence of moist soils for both outcrops. Acritarchs were recovered in the Querru 1 outcrop, which suggest a marine setting supporting a tidal flat environment indicated by facies associations. Furthermore, reworked Paleozoic palynomorphs were observed in the Querru 1 outcrop. The microflora from Igarapé Ipiranga outcrop suggests terrestrial environment corroborating with floodplain environment indicated by facies association.

Synsedimentary ash rains and paleoenvironmental conditions during the deposition of the Chachil Formation (Pliensbachian) at its type locality, Neuquén Basin, Argentina

NASA Astrophysics Data System (ADS)

Armella, Claudia; Leanza, Héctor A.; Corfu, Fernando

2016-11-01

A detailed sedimentological analysis of the so called "Chachil Limestones" at its type locality around the Mirador del Chachil area, southwestern Neuquén province, Argentina, is presented in this paper for the first time. It is based on a macro/microfacial analysis and their environmental interpretation by means on texture, fabric, bioclasts, intrabasinal and extrabasinal grain amounts, sedimentary structures, bioturbations and hydro-dynamism. Because of the recognition of different facies associations, but no pure limestones, it is more suitable to refer these sediments as the Chachil Formation. The depositional environment of this unit is interpreted to correspond to an internal platform dominated by tides, with carbonate sedimentation disturbed by repeated explosive volcanic episodes, which reduced the sedimentation space, causing retrogradation of the sedimentary system and coastal onlap. In addition, a new recalibration of the U-Pb zircon dating used for the geochronological analysis reveals a small change with regard to previous information that has been used to recalculate the data, is presented in this paper.

A process-sedimentary framework for characterizing recent and ancient sabkhas

USGS Publications Warehouse

Handford, C.R.

1981-01-01

The discovery of sabkha environments during the 1960's, marked the beginning of Recent evaporite sedimentological studies and their perception as models for facies analysis. However, variation among Recent sabkhas, though recognized by the geologic community, has not been duly addressed, which has resulted in overuse of the Trucial Coast model in comparative sedimentological studies. Knowledge of the dominant physical processes which determine sabkha morphology, and of the sedimentary response to those processes, can lead to a fundamental understanding of a sabkha's origin and of how it differs from other sabkhas. Physical processes thought to be most important (besides evaporation) include those operative under: (1) marine-; (2) fluvial-lacustrine-; and (3) eolian-dominated conditions. Dominance of one or more of these in the proper settings give rise to marine coastal sabkhas, continental playas, and interdune sabkhas. Sedimentary responses to dominant physical processes lead to the development of sabkhas consisting of a combination of either: (1) terrigenous clastics; (2) carbonate-sulfate (anhydrite-gypsum) minerals; or (3) soluble salts (halite, sylvite, polyhalite, etc.). Sediment characterization can also allow discrimination of the range or compositional variety in, for example, coastal sabkhas. Where applied to the stratigraphic record, this classification system may help unravel the sedimentary history of an ancient sabkha system, and a determination of the dominant physical processes that ruled its development. ?? 1981.

Recent Sedimentary Processes Along the Western Continental Margin of the South Korea Plateau, East Sea of Korea

NASA Astrophysics Data System (ADS)

Cukur, D.; Um, I. K.; Bahk, J. J.; Chun, J. H.; Lee, G. S.; Soo, K. G.; Horozal, S.; Kim, S. P.

2017-12-01

The continental margins of the marginal seas is largely shaped by a complex interplay of sediment transport processes directed both downslope and along-slope. Factors influence the sediment transport from shelf to the deep basin include: (i) seabed morphology, (ii) climate, (iii) sea level changes, (iv) slope stability, (v) oceanographic regime, and (vi) sediment sources. In order to understand the recent sedimentary processes along the western margin of the South Korea Plateau in the East Sea, we collected multiple geophysical datasets including the subbottom profiler and multibeam echosounder as well as geological sampling. Twelve echo types have been defined and interpreted as deposits formed by shallow marine, hemipelagic sedimentation, bottom currents, combined- (mass-movement/hemipelagic and hemipelagic/turbidites) and mass-movement-processes. Hemipelagic sedimentation, which is reflected as undisturbed layered sediments, appears to have been the primary sedimentary process throughout the study area. Two major slope-parallel channels appear to have acted as major conduits for turbidity currents from shallower shelf into the deep basins. Bottom current deposits, which is expressed as undulating seafloor morphology, are prevalent in the southern mid-slope at water depths between 250 to 450 m. Mass-transport deposits, consisting of chaotic seismic facies, occur in the upper and lower parts of the continental slope. Piston cores confirm the presence of MTDs that are characterized by mud clasts of variable size and shape. Multibeam bathymetry data show that these MTDs chiefly initiate on lower-slopes (400-600 m) where the gradient is up to 3°. In addition, subbottom profiles suggest the presence of numerous faults in close vicinity of headwall scarps; some are extending to the seafloor suggesting their recent activity. Earthquakes associated with tectonic activity are considered as the main triggering mechanism for these MTDs. Overall, the acoustic facies distribution shows that the sedimentary processes change downslope and differ within each physiographic province. In particular, the role of geological inheritance (i.e., structural folds and faults) on the geomorphology and sediment facies on the lower slopes appears to be quite important.

Stratigraphic framework of sediment-starved sand ridges on a mixed siliciclastic/carbonate inner shelf; west-central Florida

USGS Publications Warehouse

Edwards, J.H.; Harrison, S.E.; Locker, S.D.; Hine, A.C.; Twichell, D.C.

2003-01-01

Seismic reflection profiles and vibracores have revealed that an inner shelf, sand-ridge field has developed over the past few thousand years situated on an elevated, broad bedrock terrace. This terrace extends seaward of a major headland associated with the modern barrier-island coastline of west-central Florida. The overall geologic setting is a low-energy, sediment-starved, mixed siliciclastic/carbonate inner continental shelf supporting a thin sedimentary veneer. This veneer is arranged in a series of subparallel, shore-oblique, and to a minor extent, shore-parallel sand ridges. Seven major facies are present beneath the ridges, including a basal Neogene limestone gravel facies and a blue-green clay facies indicative of dominantly authigenic sedimentation. A major sequence boundary separates these older units from Holocene age, organic-rich mud facies (marsh), which grades upward into a muddy sand facies (lagoon or shallow open shelf/seagrass meadows). Cores reveal that the muddy shelf facies is either in sharp contact or grades upward into a shelly sand facies (ravinement or sudden termination of seagrass meadows). The shelly sand facies grades upward to a mixed siliciclastic/carbonate facies, which forms the sand ridges themselves. This mixed siliciclastic/carbonate facies differs from the sediment on the beach and shoreface, suggesting insignificant sediment exchange between the offshore ridges and the modern coastline. Additionally, the lack of early Holocene, pre-ridge facies in the troughs between the ridges suggests that the ridges themselves do not migrate laterally extensively. Radiocarbon dating has indicated that these sand ridges can form relatively quickly (???1.3 ka) on relatively low-energy inner shelves once open-marine conditions are available, and that frequent, high-energy, storm-dominated conditions are not necessarily required. We suggest that the two inner shelf depositional models presented (open-shelf vs. migrating barrier-island) may have co-existed spatially and/or temporally to explain the distribution of facies and vertical facies contacts. ?? 2003 Elsevier B.V. All rights reserved.

Sedimentary conditions of Upper Permian volcano-clastic rocks of Ayan-Yrahskiy anticlinorium (Verhoyansk-Kolyma orogen)

NASA Astrophysics Data System (ADS)

Astakhova, Anna; Khardikov, Aleksandr

2013-04-01

Sedimentation conditions of upper Permian volcano-clastic rocks of Ayan-Yurakhsky anticlinorium are the reason of discussions between researchers. It is important to correctly solve this problem. Investigation allows us to conclude that upper Permian sediments was formed due to high rate deltaic sedimentation on shelf and continental slope of epicontinental sea basin. More than 45 outcrops of upper Permian sediments were described within Ayan-Yurakhsky anticlinorium. Termochemical and X-ray phase, lithological facies, stadial, paleogeographic and others were applied. Investigation allows to classify following types: tuffs, tuffites of andesites, andesi-dacites, sandstone tuffs, siltstone tuffs and claystone tuffs. Two facies were deliniated in the research area: 1) delta channel facies 2) epicontinental sea shelf edge and continental slope. Delta channel facies are located on the south-west part of Aian-Yrahskiy anticlinorium. It is composed of silty packsand and psammitic tuff-siltstone alternation and gravel-psammitic andesi-dacitic tuffute and tuff-breccia bands. Sediments have cross-bedding, through cross-bedding, curvilinear lamination structures. Facies occurred during high rate deltaic sedimentation on the shelf of epicontinental sea. Epicontinental sea shelf edge and continental slope facies are located on the south-west part. Sediments are represented by large thickness tuff-siltstone with tuff-sandstone, tuff-madstone, tuff, tuffite bands and lenses. Large number of submarine landslides sediments provide evidence that there was high angle sea floore environment. 30-50 m diametr eruption centers were described by authors during geological traverses. They are located in Kulu river basin. Their locations are limited by deep-seated pre-ore fault which extended along Ayan-Yurakhsky anticlinorium. U-Pb SHRIMP method showed that the average age of circons, taken from eruption centers, is Permian (256,3±3,7 ma). This fact confirms our emphasis that eruption centers were the centre of underwater effusive explosions which had been occurred in late Permian time. Gold ore deposits mainly localized in the south of Ayan-Yurakhsky anticlinorium and associated with upper Permian deltaic facies sediments. Taking into account lithological facies feature and volcanoclastic origin of sediments it is reasonable to suggest expelled-catagenesis model of gold mineralization. Gold was entered in sedimentary basin with piroclastic material. During catagenesis stage gold migrated from complex of shelf edge and continental slope to fan delta front complex in conjunction with expelled water. The emplacement of ore gold deposits related with upper Permian sediments can be successfully predicted, using this model and associated techniques.

Facies in stratigraphy: from 'terrains' to 'terranes'.

USGS Publications Warehouse

Nelson, C.M.

1985-01-01

Concepts of lateral variation in sedimentary rocks and fossil assemblages developed in France from the 1760s; the definitive definition of facies was provided in 1838 by the Swiss geologist Amanz Gressly (1814-65) in his detailed field study of the eastern Jura. His maps and cross-sections of variations in Jurassic and Triassic rocks are illustrated. He believed that variations reflected environmental conditions, as in modern seas, and would eventually permit former depths to be reconstructed. Gressly studied at Strasbourg under Voltz and Thurmann: he collaborated with L.Agassiz, E.Desor and C.Vogt. His work influenced German and French geologists and provided a basis for interpretations of the Alps. But the facies concept was not deeply rooted in American geology until around 1884 (H.S.Williams) and in Britain and Russia until around 1900. I.S.Evans

Late Quaternary stratigraphy of the eastern Gulf of Maine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bacchus, T.S.; Belknap, D.F.

1993-03-01

Five distinct seismic facies describe the glacial, glacial-marine and postglacial sediments in the eastern Gulf of Maine. Regional cross-sections clearly document differences in the glacial-marine and postglacial stratigraphy between basins south of Truxton Swell, and Jordan basin to its north. Till occurs throughout the region as a thin veneer within basins, but thickens significantly over the ridges and swells separating basins. The ubiquitous presence of till suggests grounded ice occupied this area some time in the recent past. Ice-proximal glacial-marine (PGM) facies sediments of varying thickness mantle the entire area, occurring as a draped unit over pre-existing topography. Transitional glacial-marinemore » (TGM) facies also occur as a draped unit, but they show onlap onto basin margins. Sediments of the TGM facies are restricted to areas south of Truxton Swell. Ice-distal glacial-marine (DGM) facies sediments also mantle the entire area, but they occur primarily as a ponded, infilling unit. The nature and distribution of these glacial-marine facies within the eastern Gulf of Maine documents changes in the environment of deposition during deglaciation. In the authors model PGM facies sediments are considered to represent settling through the water column of coarse material from the base of an ice shelf. TGM facies sediments indicate retreat of this ice margin coupled with calving of large icebergs with significant amounts of coarse debris, DGM facies sediments indicate further retreat of the ice margin and a lessening of the influence of icebergs. Stepwise ice-margin retreat from south to north through a series of grounding lines and associated pinning points is evident by these time transgressive sedimentary facies that can be correlated across the region.« less

Ramp sedimentation in the Dinantian limestones of the Shannon Trough, Co. Limerick, Ireland

NASA Astrophysics Data System (ADS)

Somerville, Ian D.; Strogen, Peter

1992-08-01

During the late Chadian and Arundian (Lower Carboniferous), an extensive carbonate ramp (Limerick Ramp) developed over County Limerick, southwest Ireland, dipping northwestwards. Three distinct facies can be recognised corresponding to position on this ramp: inner, mid- and outer ramp. The inner ramp facies of oolitic and crinoidal grainstones (Herbertstown Limestone Formation) in east Limerick formed a major shoal behind which peritidal limestones were deposited. The mid-ramp facies of muddy bioclastic limestones and shales (Cooperhill facies) in north Limerick formed between fairweather and storm wave bases. The outer ramp (basinal) facies of mudstones and thin graded resedimented limestones (Rathkeale Beds) in west Limerick developed below storm wave base when fine terrigenous input was high. Later in the Arundian there was progradation of the nearshore oolitic and crinoidal grainstones over the mid-ramp facies. By the Holkerian, the deep-water basinal facies in west Limerick was buried beneath mid-ramp facies (Durnish Limestone). The initiation of the Limerick Ramp is closely related to the formation of the Shannon Trough. In the late Courceyan, accelerated subsidence in the Shannon area during deposition of Waulsortian facies marked the onset of a sag phase. Following a quiescent period in early Chadian, subsidence was renewed in the late Chadian and Arundian, when major facies changes occurred on the ramp. Comparison of the Shannon Trough with the Dublin Basin shows that in the latter, tectonic events in the Chadian and Arundian, particularly syn-sedimentary faulting, created a sharp division between platform and basinal sedimentation. Such tectonic influence is not recognised in the Shannon Trough. Here differential subsidence and eustatic sea-level changes led to more permanent ramp existence, modified only by westwards progradation.

Ichnofabrics and Facies in the Paleocene of Chicxulub: A Record of the Recovery of Life Post-Impact

NASA Astrophysics Data System (ADS)

Whalen, M. T.; O'Malley, K.; Lowery, C. M.; Rodriguez-Tovar, F. J.; Gulick, S. P. S.; Morgan, J. V.

2017-12-01

IODP/ICDP Expedition 364 recovered 829 m of core at Site M0077 including 110 m of post-impact, (hemi)pelagic Paleogene sedimentary rocks overlying the Chicxulub impact crater peak ring formed from suevite, melt rock, and granitic basement. The transition between suevite and Paleocene limestone (Unit 1F) is a remarkable fining upward package of gravel to sand-sized suevite (Unit 2A) overlain by the laminated carbonate-rich Unit 1G that records deposition of fine-grained material post-impact and contains a mix of Late Cretaceous and earliest Danian taxa. This study concentrates on the overlying Unit 1F. The ichnofabric index (ii, 1-6 indicating no bioturbation to complete homogenization), provides a semiquantitative estimate of burrow density to help assess the return of life to the crater. Unit 1F is 10 m thick with a sharp contact at the base of a green claystone (ii 2) that overlies Unit 1G. It consists of cm-dm interbedded blue-gray marlstone (ii 2) grading upward into gray to blue-gray wacke/packstone (ii 3-5). Contacts between facies are mostly gradational due to burrowing. The upper 3 m of the unit is a yellow-brown burrowed packstone (ii 4) intercalated with gray marlstone (ii 2). The uppermost 7.5 cm is calcite cemented with 1 cm wide burrows (ii 3-4) and fine to coarse sand size clasts including foraminifera. The upper surface of the unit is a hardground with an 2 Myr unconformity overlain by Eocene rocks. The first well-defined burrows occur in the upper 30 cm of Unit 1G. Unequivocal burrows (ii 2) that disturb sedimentary facies occur in overlying Unit 1F with values of 3-5 recorded in the overlying 10 cm indicating significant disruption of primary sedimentary structures. The iis in Unit 1F vary between 2 and 5 with rare laminated intervals without bioturbation (ii 1). Values of ii correlate well with facies changes, i.e. marlstones display lower iis than more carbonate-rich facies, implying a depth and/or redox control on burrower distribution. The ii data indicate that burrowers were re-established in the crater before the end of deposition of Unit 1G. The lowest Danian zone Pα is documented in the lowermost part of Unit 1F. Trace makers were thus active by the earliest Danian with an increase in abundance and diversity during the lower Danian, indicating a rapid and continuous return of benthic life to the crater.

Liquefaction features interpreted as seismites in the Pleistocene fluvio-lacustrine deposits of the Neuquén Basin (Northern Patagonia)

NASA Astrophysics Data System (ADS)

Moretti, M.; Ronchi, A.

2011-04-01

Superbly exposed soft-sediment deformation structures in Pleistocene fluvio-lacustrine deposits along the southern border of the depression area called Bajo de Añelo (Departamento de Añelo, Neuquén Basin) have been analysed. In the study area, five stratigraphic sections were measured in detail: facies distributions and stacking patterns show that these sediments result from the interaction between fluvial and lacustrine systems, represented by cross-bedded and rippled strata, and varved deposits. The lateral extent of the deformation is some hundred metres and the deformed bed involves the lower-mid part of the 30-metre-thick succession. Deformation affects about 1.5 m of coarse-grained sand, fine-grained sand and rare gravel alternations. The base and top of the deformed layer are defined by planar surfaces: undeformed beds of similar thickness, lithology and facies to the deformed layer occur above and below. Deformation is represented by a complex vertical succession of disturbed layers: each layer shows a general load-structure morphology. It can be described as a multilayered unstable density gradient system: in each bed a partial gravitational re-adjustment occurred after liquefaction. Unequal loading related to lateral variation of both bed thickness and grain packing and porosity is a probable additional driving force that can be described in the undeformed beds. Trigger mechanism recognition for the observed liquefaction features can be based on the study of the geometry of deformed beds and on facies analysis results. Two key factors drive our interpretation: (1) the occurrence of undeformed beds below and above the deformed bed; (2) deformed and undeformed beds showing the same sedimentological features. These field data allow us to exclude the action of internal erosive and/or sedimentary processes (such as overloading, wave action, etc.) as possible trigger agents for liquefaction since deformation is totally absent in beds with similar sedimentary features. Furthermore, each internal erosive and/or sedimentary process can be discussed and easily excluded by analysing its specific signature in the geological record. Having excluded every possible internal trigger (autokinetic processes), the observed liquefaction effects can reasonably be interpreted as seismically induced (allokinetic trigger). From this point of view, this deformed bed is an important record of seismic activity in this sector of the Neuquén Basin during the Pleistocene.

Recent benthic foraminifera and sedimentary facies from mangrove swamps and channels of Abu Dhabi (United Arab Emirates)

NASA Astrophysics Data System (ADS)

Fiorini, Flavia; Odeh, Weaam A. S. Al; Lokier, Stephen W.; Paul, Andreas

2016-04-01

Zonation of Recent mangrove environments can be defined using benthic foraminifera, however, little is known about foraminifera from mangrove environments of the Arabian Gulf. The objective of this study is to produce a detailed micropaleontological and sedimentological analysis to identify foraminiferal associations in several coastline environments (mangrove swamps and channels) located on the eastern side of Abu Dhabi Island (UAE). Detailed sediment sampling collection in mangal environments of Eastern Abu Dhabi was carried out to assess the distribution of living and dead benthic foraminifera in different sedimentary facies in the mangal and in the surrounding area comprising natural environments of the upper and lower intertidal area (mud flats and channels) and areas modified by anthropogenic activities (dredged channels). The fine-grain sediments collected near mangrove (Avicenna marina) roots presented a high abundance of living and dead foraminifera tests. The assemblages in these samples show very low diversity and are almost entirely constituted of small-sized opportunistic species belonging to the genera Ammonia and Elphidium. In particular: • Samples collected on the mud flat and in ponds at the margin of the channel show a foraminiferal assemblage characterised by abundant foraminifera belonging to the genera Ammonia, Elphidium, Triloculina, Quinqueloculina, Peneroplis and Spirolina. • Samples collected in the lower (wet) intertidal area close to Avicenna marina roots, presented a low-diversity assemblage mostly comprising opportunistic foraminifera of the genera Ammonia and Elphidium along with rare miliolidae. • Samples from the upper intertidal area (dry) close to Avicenna marina roots, produced an assemblage exclusively composed of small-sized opportunistic Ammonia and Elphidium, together with abundant specimens belonging to the genera Trochammina. Throchammina specimens have not been previously recorded from Recent sedimentary samples of the coastline environments of the Arabian Gulf. The samples collected in the higher energy settings (channels) were characterised by a very low abundance of foraminiferal tests, no or rare living forms were found in the coarser grained facies. Most of the samples collected in the dredged channels were barren. The distribution of Recent benthic foraminifera from mangrove environment of the Abu Dhabi region present a powerful tool for constructing zonation of marine coastline environments and can be employed as a modern analogue for interpreting the depositional environment of ancient coastline sediments.

Chronology of the cave interior sediments at Gran Dolina archaeological site, Atapuerca (Spain)

NASA Astrophysics Data System (ADS)

Parés, J. M.; Álvarez, C.; Sier, M.; Moreno, D.; Duval, M.; Woodhead, J. D.; Ortega, A. I.; Campaña, I.; Rosell, J.; Bermúdez de Castro, J. M.; Carbonell, E.

2018-04-01

The so-called "Gran Dolina site" (Atapuerca mountain range, N Spain) is a karstic cavity filled by sediments during the Pleistocene, some of which contain a rich ensemble of archaeological and paleontological records. These sediments have contributed significantly to our understanding of early human dispersal in Europe but, in contrast, older, interior facies deposits have received much less of attention. The stratigraphy of Gran Dolina reveals an abrupt sedimentary change of interior to entrance facies from bottom to top, reflecting a significant paleoenvironmental change that promoted the accumulation of sediments transported from the vicinity of the cave by water or "en masse". Since the major magnetic polarity reversal known as the Matuyama-Brunhes boundary (0.78 Ma) was detected within the TD7 unit in the middle of the stratigraphic section, we carried out a new combined paleomagnetic, radiometric (U-Pb), and electron spin resonance (ESR) dating study of the lower part of the sequence in order to constrain the chronology of the interior facies at Gran Dolina. U-Pb analysis of speleothems did not produce age information as the samples proved to be extremely unradiogenic. The magnetic stratigraphy of the cave interior sediments reveals a dominant reverse magnetic polarity, coherent with a Matuyama age, and interrupted by a normal polarity magnetozone interpreted as the Jaramillo Subchron (1.0-1.1 Ma). ESR ages on quartz grains from the upper part of the interior facies sediments are coherent with such an interpretation. We conclude that the fluvial deposits (interior facies) that constitute the cave floor began accumulating before 1.2 Ma. The development of large cave entrances at Gran Dolina occurred shortly after the Jaramillo Subchron but before ca 900 ka ago.

Oil-bearing sediments of Gondwana glaciation in Oman

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levell, B.K.; Braakman, J.H.; Rutten, K.W.

1988-07-01

More than 3.5 billion bbl of oil in place have so far been discovered in reservoirs of the Al Khlata Formation of the Permian-Carboniferous lower Haushi Group in south Oman. Glacially striated pavements and boulders in exposures at Al Khlata in east-central Oman confirmed previous interpretations that the formation is, at least partly, of glacial origin. Core and wireline-log data from some 500 wells that penetrate the formation show that glacial facies are widespread in the subsurface. Shales with varvelike laminations and dropstones are present in two main layers, which extend over the larger part of south Oman and aremore » perhaps the most diagnostic facies. Diamictites are also widespread, and some, which can be correlated as sheets over thousands of square kilometers, are interpreted as true tillites. Other diamictites are interbedded with shales with varvelike laminations or unbedded siltstones and are interpreted as subaqueous glacial deposits. Ten sedimentary facies have been described in cores and outcrops. An important result of this study is a formal scheme to interpret these facies from wireline logs using quantitative analysis of density and neutron logs and qualitative information from other logs. Lateral facies relationships are complicated by syndepositional salt withdrawal and dissolution, paleorelief on the basal unconformity, and intraformational unconformities beneath regionally extensive tillites. At least three glacial phases can be recognized: an early phase, represented only by erosional remnants of diamictites, and two later phases, the last of which extended over the whole of Oman south of the Oman Mountains. Deglaciation is represented by a regional shale bed sharply overlying the diamictite sheet of this last glaciation. 19 figures, 1 table.« less

Patterns of megafloral change across the Cretaceous-Tertiary boundary in the Northern Great Plains and Rocky Mountains

NASA Technical Reports Server (NTRS)

Johnson, Kirk R.; Hickey, Leo J.

1988-01-01

The spatial and temporal distribution of vegetation in the terminal Cretaceous of Western Interior North America was a complex mosaic resulting from the interaction of factors including a shifting coastline, tectonic activity, a mild, possibly deteriorating climate, dinosaur herbivory, local facies effects, and a hypothesized bolide impact. In order to achieve sufficient resolution to analyze this vegetational pattern, over 100 megafloral collecting sites were established, yielding approximately 15,000 specimens, in Upper Cretaceous and lower Paleocene strata in the Williston, Powder River, and Bighorn basins in North Dakota, Montana, and Wyoming. These localities were integrated into a lithostratigraphic framework that is based on detailed local reference sections and constrained by vertebrate and palynomorph biostratigraphy, magnetostratigraphy, and sedimentary facies analysis. A regional biostratigraphy based on well located and identified plant megafossils that can be used to address patterns of floral evolution, ecology, and extinction is the goal of this research. Results of the analyses are discussed.

Morphologic and stratigraphic evolution of muddy ebb-tidal deltas along a subsiding coast: Barataria Bay, Mississippi River delta

USGS Publications Warehouse

FitzGerald, D.M.; Kulp, M.; Penland, S.; Flocks, J.; Kindinger, J.

2004-01-01

The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea-level rise (1??03 cm year-1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km2 since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross-sections and prograding ebb-tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2??2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb-tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey-brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75-100%) compared with the distal delta sediments (60-80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb-tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb-tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb-tidal delta lithosome is presently no more than 5 m thick and is generally only 2-3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine-grained sedimentation seaward of the inlets and the encasement of the ebb-tidal delta lithosome in mud. The ebb-tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand-rich coasts by their muddy content and lack of large-scale stratification produced by channel cut-and-fills and bar migration. ?? 2004 International Association of Sedimentologists.

Comparing orbiter and rover image-based mapping of an ancient sedimentary environment, Aeolis Palus, Gale crater, Mars

NASA Astrophysics Data System (ADS)

Stack, K. M.; Edwards, C. S.; Grotzinger, J. P.; Gupta, S.; Sumner, D. Y.; Calef, F. J.; Edgar, L. A.; Edgett, K. S.; Fraeman, A. A.; Jacob, S. R.; Le Deit, L.; Lewis, K. W.; Rice, M. S.; Rubin, D.; Williams, R. M. E.; Williford, K. H.

2016-12-01

This study provides the first systematic comparison of orbital facies maps with detailed ground-based geology observations from the Mars Science Laboratory (MSL) Curiosity rover to examine the validity of geologic interpretations derived from orbital image data. Orbital facies maps were constructed for the Darwin, Cooperstown, and Kimberley waypoints visited by the Curiosity rover using High Resolution Imaging Science Experiment (HiRISE) images. These maps, which represent the most detailed orbital analysis of these areas to date, were compared with rover image-based geologic maps and stratigraphic columns derived from Curiosity's Mast Camera (Mastcam) and Mars Hand Lens Imager (MAHLI). Results show that bedrock outcrops can generally be distinguished from unconsolidated surficial deposits in high-resolution orbital images and that orbital facies mapping can be used to recognize geologic contacts between well-exposed bedrock units. However, process-based interpretations derived from orbital image mapping are difficult to infer without known regional context or observable paleogeomorphic indicators, and layer-cake models of stratigraphy derived from orbital maps oversimplify depositional relationships as revealed from a rover perspective. This study also shows that fine-scale orbital image-based mapping of current and future Mars landing sites is essential for optimizing the efficiency and science return of rover surface operations.

Comparing orbiter and rover image-based mapping of an ancient sedimentary environment, Aeolis Palus, Gale crater, Mars

USGS Publications Warehouse

Stack, Kathryn M.; Edwards, Christopher; Grotzinger, J. P.; Gupta, S.; Sumner, D.; Edgar, Lauren; Fraeman, A.; Jacob, S.; LeDeit, L.; Lewis, K.W.; Rice, M.S.; Rubin, D.; Calef, F.; Edgett, K.; Williams, R.M.E.; Williford, K.H.

2016-01-01

This study provides the first systematic comparison of orbital facies maps with detailed ground-based geology observations from the Mars Science Laboratory (MSL) Curiosity rover to examine the validity of geologic interpretations derived from orbital image data. Orbital facies maps were constructed for the Darwin, Cooperstown, and Kimberley waypoints visited by the Curiosity rover using High Resolution Imaging Science Experiment (HiRISE) images. These maps, which represent the most detailed orbital analysis of these areas to date, were compared with rover image-based geologic maps and stratigraphic columns derived from Curiosity’s Mast Camera (Mastcam) and Mars Hand Lens Imager (MAHLI). Results show that bedrock outcrops can generally be distinguished from unconsolidated surficial deposits in high-resolution orbital images and that orbital facies mapping can be used to recognize geologic contacts between well-exposed bedrock units. However, process-based interpretations derived from orbital image mapping are difficult to infer without known regional context or observable paleogeomorphic indicators, and layer-cake models of stratigraphy derived from orbital maps oversimplify depositional relationships as revealed from a rover perspective. This study also shows that fine-scale orbital image-based mapping of current and future Mars landing sites is essential for optimizing the efficiency and science return of rover surface operations.

Coastal stratigraphies of eastern Bonaire (Netherlands Antilles): New insights into the palaeo-tsunami history of the southern Caribbean

NASA Astrophysics Data System (ADS)

Engel, Max; Brückner, Helmut; Wennrich, Volker; Scheffers, Anja; Kelletat, Dieter; Vött, Andreas; Schäbitz, Frank; Daut, Gerhard; Willershäuser, Timo; May, Simon Matthias

2010-11-01

A sediment record of three alluvial sites along the east- and northeast-oriented shore of Bonaire (Netherlands Antilles) provides evidence for the recurrence of several extraordinary wave impacts during the Holocene. The interpretation of onshore high-energy wave deposits is controversially discussed in recent sedimentary research. However, it represents a powerful tool to evaluate the hazard of tsunami and severe storms where historical documentation is short and/or fragmentary. A facies model was established based on sedimentary and geochemical characteristics as well as the assemblage and state of preservation of shells and shell fragments. Radiocarbon data and the comparison of the facies model with both recent local hurricane deposits and global "tsunami signature types" point to the occurrence of three major wave events around 3300, 2000-1700 and shortly before 500 BP. Since (i) the stratigraphically correlated sand layers fulfill several sedimentary characteristics commonly associated with tsunamis and (ii) modern strong hurricanes left only little or even no sediment in the study areas, they were interpreted as tsunamigenic. However, surges largely exceeding the energy of those accompanying modern hurricanes in the southern Caribbean cannot entirely be ruled out. The results are partially consistent with existing chronologies for Holocene extreme wave events deduced from supralittoral coarse-clast deposits on Aruba, Bonaire and Curaçao as well as overwash sediments from Cayo Sal, Venezuela.

Sequence stratigraphy of the subaqueous Changjiang (Yangtze River) delta since the Last Glacial Maximum

NASA Astrophysics Data System (ADS)

Xu, Taoyu; Wang, Guoqing; Shi, Xuefa; Wang, Xin; Yao, Zhengquan; Yang, Gang; Fang, Xisheng; Qiao, Shuqing; Liu, Shengfa; Wang, Xuchen; Zhao, Quanhong

2016-01-01

This study focuses on sedimentary research at the subaqueous Changjiang (Yangtze River) delta, based on five high-resolution seismic profiles and seven borehole cores with accurate AMS 14C datings. Three distinct seismic units were identified from the seismic profiles according to seismic reflection characteristics, and five sedimentary facies were recognized from borehole cores. These facies constituted a fining upward sedimentary sequence in relation to postglacial sea-level transgression. Three sequence surfaces (sequence boundary (SB), transgressive surface (TS), and maximum flooding surface (MFS)) demarcate the boundaries between early transgressive system tract (E-TST), late transgressive system tract (L-TST), early highstand system tract (E-HST) and late highstand system tract (L-HST), which constitute the sixth order sequence. These system tracts were developed coevally with postglacial sea-level rise. E-TST (~ 19-12 ka BP) corresponds to an incised-valley infilling in the early stages of postglacial transgression whereas L-TST (~ 12-7.5 ka BP) was formed during the last stage of postglacial transgression. The progradational structure of L-TST reflected in seismic profiles is possibly related to the intensification of the East Asian summer monsoon. E-HST (~ 7.5-2 ka BP) was deposited in response to the highstand after maximum postglacial transgression was reached, while L-HST (~ 2 ka BP-present) was initiated by accelerated progradation of the Changjiang delta.

Facies And Bedding Analysis of Deep-Marine, Arc-Related, Sediementary Rocks Cored on International Ocean Drilling Program Expedition 351.

NASA Astrophysics Data System (ADS)

Johnson, K. E.; Marsaglia, K. M.

2015-12-01

The Izu-Bonin-Mariana (IBM) Arc System, south of Japan, hosts a multitude of active and extinct (remnant) arc volcanic sediment sources. Core extracted adjacent to the proto-IBM arc (Kyushu-Palau Ridge; KPR) in the Amami-Sankaku Basin on International Ocean Discovery Program (IODP) Expedition 351 contains evidence of the variety of sediment sources that have existed in the area as a result of changing tectonic regimes through arc development, backarc basin formation and remnant arc abandonment. Approximately 1000 meters of Eocene to Oligocene volcaniclastic sedimentary rocks were analyzed via shipboard core photos, core descriptions, and thin sections with the intention of understanding the depositional history at this site. These materials contain a crucial record of arc development complementary to the Neogene history preserved in the active reararc (Expedition 350) and compressed whole-arc record in the current forearc (Expedition 352). A database of stratigraphic columns was created to display grain size trends, facies changes, and bedding characteristics. Individual beds (depositional events) were classified using existing and slightly modified classification schemes for muddy, sandy and gravel-rich gravity flow deposits, as well as muddy debris flows and tuffs. Utilizing the deep marine facies classes presented by Pickering et al. (1986), up section changes are apparent. Through time, as the arc developed, facies and bedding types and their proportions change dramatically and relatively abruptly. Following arc initiation facies are primarily mud-rich with intercalated tuffaceous sand. In younger intervals, sand to gravel gravity-flow deposits dominate, becoming more mud-rich. Muddy gravity flow deposits, however, dominate farther upsection. The overall coarsening-upward pattern (Unit III) is consistent with building of the arc edifice. Farther upsection (Unit II) an abrupt fining-upward trend represents the onset of isolation of the KPR as backarc spreading in the Shikoku Basin was initiated. This information will be combined with volcanic provenance and geochemical information from other studies, ultimately creating a deep-marine facies model for intraoceanic arc systems.

Oligocene lacustrine tuff facies, Abu Treifeya, Cairo-Suez Road, Egypt

NASA Astrophysics Data System (ADS)

Abdel-Motelib, Ali; Kabesh, Mona; El Manawi, Abdel Hamid; Said, Amir

2015-02-01

Field investigations in the Abu Treifeya area, Cairo-Suez District, revealed the presence of Oligocene lacustrine volcaniclastic deposits of lacustrine sequences associated with an Oligocene rift regime. The present study represents a new record of lacustrine zeolite deposits associated with saponite clay minerals contained within reworked clastic vitric tuffs. The different lithofacies associations of these clastic sequences are identified and described: volcaniclastic sedimentary facies represent episodic volcaniclastic reworking, redistribution and redeposition in a lacustrine environment and these deposits are subdivided into proximal and medial facies. Zeolite and smectite minerals are mainly found as authigenic crystals formed in vugs or crusts due to the reaction of volcanic glasses with saline-alkaline water or as alteration products of feldspars. The presence of abundant smectite (saponite) may be attributed to a warm climate, with alternating humid and dry conditions characterised by the existence of kaolinite. Reddish iron-rich paleosols record periods of non-deposition intercalated with the volcaniclastic tuff sequence.

Sedimentary petrography of the Early Proterozoic Pretoria Group, Transvaal Sequence, South Africa: implications for tectonic setting

NASA Astrophysics Data System (ADS)

Schreiber, U. M.; Eriksson, P. G.; van der Neut, M.; Snyman, C. P.

1992-11-01

Sandstone petrography, geochemistry and petrotectonic assemblages of the predominantly clastic sedimentary rocks of the Early Proterozoic Pretoria Group, Transvaal Sequence, point to relatively stable cratonic conditions at the beginning of sedimentation, interrupted by minor rifting events. Basement uplift and a second period of rifting occurred towards the end of Pretoria Group deposition, which was followed by the intrusion of mafic sill swarms and the emplacement of the Bushveld Complex in the Kaapvaal Craton at about 2050 Ma, the latter indicating increased extensional tectonism, and incipient continental rifting. An overall intracratonic lacustrine tectonic setting for the Pretoria Group is supported by periods of subaerial volcanic activity and palaeosol formation, rapid sedimentary facies changes, significant arkosic sandstones, the presence of non-glacial varves and a highly variable mudrock geochemistry.

Mohawk Lake or Mohawk meadow Sedimentary facies and stratigraphy of Quaternary deposits in Mohawk Valley, upper Middle Fork of the Feather River, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yount, J.C.; Harwood, D.S.; Bradbury, J.P.

1993-04-01

Mohawk Valley (MV) contain thick, well-exposed sections of Quaternary basin-fill sediments, with abundant interbedded tephra and a diverse assemblage of sedimentary facies. The eastern arm of MV, extending from Clio to Portola, contains as much as 100 m of trough cross-bedded cobble to pebble gravel and planar and trough cross-bedded coarse and medium sand, interpreted as braided stream deposits. Sections exposed in the western arm of MV consist in their lower parts of massive organic-rich silt and clay interbedded with blocky to fissile peat beds up to 1 m thick. Diatom assemblages are dominated by benthic species indicating fresh marshmore » environments with very shallow water depths of one meter or less. Proglacial lacustrine deposits of limited lateral extent are present within the outwash complexes as evidenced by varved fine sand and silt couplets, poorly sorted quartz-rich silt beds containing dropstones, and contorted beds of diamict grading laterally into slump blocks surrounded by wood-bearing silt and silty sand. The Rockland Ash (400 ka) is a prominent marker in the middle or lower part of many sections throughout MV, indicating that at least half of the basin-fill sequence is Late Quaternary in age. A log buried in diamict slumped into a proglacial lake lying approximately 3 km downstream from the Tioga Stage ice termini in Jamison and Gray Eagle Creeks yields an age of 18,715 [+-]235 C[sup 14] years BP. Previous interpretations of MV deposits originating in a large, deep lake with water depths in excess of 150 m are untenable given the sedimentary facies and diatom floras that dominate the valley. Unexhumed valleys such as Sierra Valley to the east and Long Valley to the northwest which contain large meadows traversed by braided streams are probably good analogs for the conditions that existed during the accumulation of the Mohawk Valley deposits.« less

Subsurface Permian reef complexes of southern Tunisia: Shelf carbonate setting and paleogeographic implications

NASA Astrophysics Data System (ADS)

Zaafouri, Adel; Haddad, Sofiene; Mannaî-Tayech, Beya

2017-05-01

2-D seismic reflection sections, borehole data as well as published and unpublished data have been investigated to reconstruct the paleogeography of southern Tunisia during Middle to Late Permian times. Paleogeographical reconstruction based on the integration of petroleum well data and 2-D seismic facies interpretation shows three main depositional areas with very contrasting sedimentary pile. These are 1) a subsiding basin; 2) an outer shelf carbonate, and 3) an inner shelf carbonate. Based on typical electric responses of reef buildups to seismic wave, we shall urge that during Middle Permian times, the outer carbonate shelf was subject of reef barrier development. Lithology evidences from core samples show that reef framework correspond mainly to fossiliferous limestone and dolomite. The WNW-ESE recognized reef barrier led between latitudes 33° 10‧ 00″N and 33° 20‧ 00″N. The Tebaga of Medenine outcrop constitutes the northern-edge of this barrier. Westward it may be extended to Bir Soltane area whereas its extension eastward is still to be determined. Biogenic buildups took place preferentially over faulted Carboniferous and lower Paleozoic paleohighs resulting likely from the Hercynian orogeny. The subsiding basin is located north of Tebaga of Medenine outcrop where Upper Permian sedimentary sequence is made entirely of 4000 m deep marine green silty shale facies. These are ascribed to unorganized and chaotic reflectors. Inner carbonate shelf facies succession corresponds to a typical interbedding of shallow marine carbonate deposits, shale, dolomite, and anhydrite inducing parallel-layered of strong amplitude and good continuity reflectors. Also within the inner carbonate shelf patch reef or reef pinnacles have been identified based on their seismic signature particularly their low vertical development as compared to reef complexes. Southward, towards Sidi Toui area, the Upper Permian depositional sequence thins out and bears witness of land influences as entailed by the increase of silicoclastic sedimentary supply and the lack of marine fossil.

Spatial and temporal modelling of fluvial aggradation in the Hasli Valley (Swiss Alps) during the last 1300 years

NASA Astrophysics Data System (ADS)

Llorca, Jaime; Schulte, Lothar; Carvalho, Filipe

2016-04-01

The Haslital delta (upper Aare River catchment, Bernese Alps) progradated into the Lake Brienz after the retreat of the Aare Glacier (post-LGM). Present delta plain geomorphology and spatial distribution of sedimentary facies result from historical fluvial dynamics and aggradation. Over centuries, local communities have struggled to control the Aare floods and to mitigate their effects on the floodplain (by means of raising artificial levees, channelizing the course, creating an underground drainage network, constructing dams at the basin headwaters). This study focuses on the spatial and temporal evolution of sediment dynamics of the floodplain by analyzing fluvial sedimentary records . The internal variability of lithostratigraphic sequences is a key issue to understand hydrological processes in the basin under the effect of environmental and anthropogenic changes of the past. The floodplain lithostratigraphy was reconstructed by coring alongside four cross-sections; each one is composed of more than 25 shallow boreholes (2 m deep) and two long drillings (variable depth, up to 9 m). The chronostratigraphical models were obtained by AMS 14C dating, and information of paleofloods and channel migration were reconstructed from historical sources (Schulte et al., 2015). The identification of different sedimentary facies, associated with the fluvial architecture structures, provides information on variations of vertical and lateral accretion processes (Houben, 2007). The location and geometry of buried channel-levee facies (gravel and coarse sand layers) indicate a significant mobility of the riverbed of the Hasli-Aare river, following an oscillatory pattern during the last millennia. Furthermore, fine sedimentary deposits and peat layers represent the existence of stable areas where floods have a low incidence. Once the different types of deposits were identified, aggradation rates were estimated in order to determine the spatial variability of the accumulation process. Results suggest a longitudinal decrease of sedimentation rates from the apex towards the distal section of the delta plain. Differences in rates are also found within each cross-section (e.g. channel-levée: higher rates; interdistributary depression: lower rates), suggesting an asymmetric growth of the floodplain. A GIS paleosurfaces model was executed to calculate the fluvial sediment storage, which was subdivided in 300-year time slices, thus contributing to identify temporal trends in floodplain aggradation. The results were analyzed with regard to external drivers that control the sedimentation processes in the Haslital delta, such as climate and/or anthropogenic factors (land-use changes, hydraulic management), as well as the influence of the internal system settings. The facies-based approach provides an explanation of both the spatial and temporal components of delta plain formation; and produces valid information for local flood risk management, concerning the problem of alpine floodplains aggradation.

Tide-Dominated Tract (TDT) as a key sedimentary zone characterizing tide-dominated large-river delta and estuary systems

NASA Astrophysics Data System (ADS)

Saito, Y.

2017-12-01

Large rivers in continents have a characteristic of slow rise and fall in water levels during floods or the wet season due to a wide drainage basin. A gentle river gradient and large water discharge have relatively large tidal ranges at the river mouth, resulting in large backwater effects further upstream. The result of the Mekong River survey (386 riverbed sediments, river topography, CTD, and biofacies) shows that the distributary channels of the Mekong River delta in Vietnam are divided into two parts: the landward river-dominated tract (RDT) and seaward tide-dominated tract (TDT). The RDT is characterized by a highly variable and deepening trend in water depth and coarse-grained sediments with a fining trend downstream. The TDT is characterized by a shallowing trend in water depth with river-widening, smooth riverbeds, a straight shape, and heterolithic f- to vf-sand and mud alternation (tidal thythmite). The boundary of both tracts is sharply identified by sediment facies and river morphology. Sediment facies indicates that the dominant sedimentary process of bottom sediments is "bedload" in the RDT and "suspension" in the TDT. Daily tidal changes are observed through the year, while water-level changes during the flood/wet season are limited in the TDT. Saltwater intrusion is limited within the seaward part of the TDT alone ( 50 km), close to final bifurcation points. However, brackish-water biofacies is observed in the TDT mainly due to diluted brackish water and/or tolerance to the freshwater environment. These characteristics are also found in the Yangtze; the distance of the TDT/RDT boundary from the river mouth is ca. 100 km in the Mekong, and 200 km in the Yangtze. The preservation potential of sediments in a TDT is low in a progradational system, and high in abandoned channels. The early Holocene transgressive estuary system in the incised valley of the Yangtze formed during the Last Glacial Maximum was composed of 20 m-thick fine-grained heterolithic sediments (inclusive of tidal thythmite), distributed over 200 km in the valley, inside of the paleo-shoreline. Similarly, such well-preserved sediments are formed in a TDT of a large-river transgressive estuarine system. An estuarine facies model for large-river systems is the need of the hour. cf. references Gugliotta et al., Process regime, salinity, morphological, and sedimentary trends along the fluvial to marine transition zone of the mixed-energy Mekong River delta, Vietnam. Continental Shelf Research. http://dx.doi.org/10.1016/j.csr.2017.03.001. Hori et al., 2001. Sedimentary facies of the tide-dominated paleo-Changjiang (Yangtze) estuary during the last transgression. Marine Geology, 177, 331-351.

A Late Pleistocene-Holocene wetland megafan in the Brazilian Amazonia

NASA Astrophysics Data System (ADS)

Rossetti, D. F.; Zani, H.; Cohen, M. C. L.; Cremon, É. H.

2012-12-01

Despite the growing interest in megafans, definitions provided for this type of environmental setting have not yet been widely agreed upon. A record of sedimentary facies distribution in both space and time including a larger number of analogs is particularly needed for improving megafan facies models. This work focuses on a large fan-like feature from an Amazonian wetland in northern Brazil. Morphological data based on remote sensing, as well as sedimentary facies and radiocarbon analyses, were integrated to propose that this feature is related to a megafan system active during the Late Pleistocene to Holocene. The megafan displays a divergent drainage network, gently-dipping slope, and concave-up and convex-up longitudinal and transverse profiles, respectively. Near surface deposits correspond to fining and coarsening upward sands related to active channels and overbank sand sheets/terminal fan lobes. Sediments are interbedded with abandoned channel/floodplain and lake/pond muds. Morphostructural analyses and drainage anomalies revealed a geological setting affected by reactivation of pre-existing faults contemporaneous with sediment accumulation. Establishment of a megafan system in this wetland most likely occurred within a slightly tectonically subsiding basin under favorable climatic conditions. During wet seasons, high water discharge would have favored sediment transport from highlands into this depositional site. High summer temperatures and drought under a monsoonal regime kept the water levels low. The described megafan could serve as an analog for contemporary tropical wetland megafans formed under a monsoonal climate regime.

Coral reef evolution on rapidly subsiding margins

USGS Publications Warehouse

Webster, J.M.; Braga, J.C.; Clague, D.A.; Gallup, C.; Hein, J.R.; Potts, D.C.; Renema, W.; Riding, R.; Riker-Coleman, K.; Silver, E.; Wallace, L.M.

2009-01-01

A series of well-developed submerged coral reefs are preserved in the Huon Gulf (Papua New Guinea) and around Hawaii. Despite different tectonics settings, both regions have experienced rapid subsidence (2-6??m/ka) over the last 500??ka. Rapid subsidence, combined with eustatic sea-level changes, is responsible for repeated drowning and backstepping of coral reefs over this period. Because we can place quantitative constraints on these systems (i.e., reef drowning age, eustatic sea-level changes, subsidence rates, accretion rates, basement substrates, and paleobathymetry), these areas represent unique natural laboratories for exploring the roles of tectonics, reef accretion, and eustatic sea-level changes in controlling the evolution of individual reefs, as well as backstepping of the entire system. A review of new and existing bathymetric, radiometric, sedimentary facies and numerical modeling data indicate that these reefs have had long, complex growth histories and that they are highly sensitive, recording drowning not only during major deglaciations, but also during high-frequency, small-amplitude interstadial and deglacial meltwater pulse events. Analysis of five generalized sedimentary facies shows that reef drowning is characterized by a distinct biological and sedimentary sequence. Observational and numerical modeling data indicate that on precessional (20??ka) and sub-orbital timescales, the rate and amplitude of eustatic sea-level changes are critical in controlling initiation, growth, drowning or sub-aerial exposure, subsequent re-initiation, and final drowning. However, over longer timescales (> 100-500??ka) continued tectonic subsidence and basement substrate morphology influence broad scale reef morphology and backstepping geometries. Drilling of these reefs will yield greatly expanded stratigraphic sections compared with similar reefs on slowly subsiding, stable and uplifting margins, and thus they represent a unique archive of sea-level and climate changes, as well as a record of the response of coral reefs to these changes over the last six glacial cycles. ?? 2008 Elsevier B.V. All rights reserved.

Reservoir and aquifer characterization of fluvial architectural elements: Stubensandstein, Upper Triassic, southwest Germany

NASA Astrophysics Data System (ADS)

Hornung, Jens; Aigner, Thomas

1999-12-01

This paper aims at a quantitative sedimentological and petrophysical characterization of a terminal alluvial plain system exemplified by the Stubensandstein, South German Keuper Basin. The study follows the outcrop-analogue approach, where information derived from outcrops is collected in order to enhance interpretation of comparable subsurface successions. Quantitative data on sandbody geometries, porosities and permeabilities are presented in order to constrain modelling of subsurface sandbodies and permeability barriers. For sedimentological characterization the method of architectural element analysis (Miall, A.D., 1996. The Geology of Fluvial Deposits. Springer, Berlin) was used, and modified to include poroperm facies. A special photo-technique with a precise theodolite survey was developed to create optically corrected photomosaics for outcrop wall maps from up to 20,000 m 2 large outcrops. Nine architectural elements have been classified and quantified. Bedload, mixed-load and suspended-load channel fills are separated. The petrophysical characterization of the architectural elements integrated porosity and permeability measurements of core-plugs with gamma-ray measurements along representative sections. It could be demonstrated, that certain architectural elements show a characteristic poroperm facies. Four scales of sedimentary cycles have been recognized in the Stubensandstein. Cyclic sedimentation causes changing lithofacies patterns within the architectural elements, depending on their position in the sedimentary cycle. Stratigraphic position exerts only some, paleogeographic position exerts significant influence on porosity and permeability of the sandbodies. The highest poroperm values were found in proximal areas of the alluvial plain and in middle parts within sedimentary macrocycles. The strong internal heterogeneity on the alluvial plain system is important for its reservoir and aquifer characteristics. Compartments of bedload channel sandstones in medial positions of a stratigraphic cycle represent very good reservoirs or aquifers. The seals or aquicludes are formed by extensive floodplain claystones, lacustrine sediments, paleosols, and suspended-load deposits. Strongly cemented zones of sandstones represent aquitards.

An Appalachian Amazon? Magnetofossil evidence for the development of a tropical river-like system in the mid-Atlantic United States during the Paleocene-Eocene Thermal Maximum

NASA Astrophysics Data System (ADS)

Kopp, R. E.; Schumann, D.; Raub, T. D.; Powars, D. S.; Godfrey, L. V.; Swanson-Hysell, N.; Maloof, A. C.; Vali, H.

2009-12-01

The Paleocene-Eocene Thermal Maximum is preserved within the mid-Atlantic Coastal Plain as a unique clay deposited in the Salisbury Embayment, a tectonic downwarp that stretches from southeastern Virginia to central New Jersey. The mostly massive and kaolinite-rich clay is distinct from the glauconitic sediments that otherwise characterize regional Paleocene and lower Eocene deposits. It contains abundant magnetite produced by magnetotactic bacteria and by larger, presumptively eukaryotic microorganisms not yet known from any other locality. Because most magnetotactic bacteria live within a specific, narrow redox environment -- the suboxic zone of a water column or sediments, where both oxygen and sulfide concentrations are low and iron concentrations relatively high -- their biominerals can be used as a paleoenvironmental tracer. High iron bioavailability indicates a relatively thick suboxic zone. The preservation of iron biominerals suggests that this zone was located in sediments, rather than in the water column, as water column suboxia is associated with high sedimentary organic carbon concentrations, which promote magnetite dissolution. The thickest modern, sedimentary, high-iron suboxic zones occur in tropical river-dominated shelves, such as the Amazon Shelf. These zones result from the combination of a moderately high input of reactive Fe (produced by tropical weathering conditions) with a high-energy environment (produced by tides, frontal-zone currents, and surface waves) that promotes the regular physical reworking of the sediments, thus allowing the re-oxidation of reduced Fe and increasing the availability of Fe as an electron acceptor. To test the "Appalachian Amazon" hypothesis, we mapped the distribution of magnetofossils throughout the Salisbury Embayment using ferromagnetic resonance spectroscopy and electron microscopy, supplemented by organic carbon isotope data. We find three magnetic facies in the clay: Facies 1, characterized by a mix of detrital particles and magnetofossils; Facies 2, with a higher magnetofossil-to-detrital ratio; and Facies 3, with only transient magnetofossils. Facies 1 occurs in inner-middle neritic deposits of central Maryland and northern Virginia, near where the modern Potomac crosses the Fall Line. Facies 2 occurs throughout the middle neritic deposits of eastern Maryland and Virginia and of southern New Jersey. Facies 3 occurs in the outer neritic deposits of eastern New Jersey and on the northern and southern flanks of the embayment. Consistent with the hypothesis, this distribution suggests a link between the magnetofossil distribution and a river system with an outlet in the vicinity of Facies 1. The development of such a river system may have been linked to a combination of more intense weathering, higher precipitation, and increased storminess.

Non-seagrass meadow sedimentary facies of the Pontinian Islands, Tyrrhenian Sea: A modern example of mixed carbonate siliciclastic sedimentation

NASA Astrophysics Data System (ADS)

Brandano, Marco; Civitelli, Giacomo

2007-10-01

The soft bottom of the Mediterranean continental shelf is characterized by a heterozoan skeletal assemblage ( sensu [James, N.P., 1997. The cool-water carbonate depositional realm. In: James, N.P., Clarke, J. (Eds), Cool-water Carbonates. Spec. Publ. Soc. Sediment. Geol., vol. 56, pp.1-20.]). Although the contemporary presence of terrigenous and skeletal carbonate sediments has been well established [Tortora, P., 1996. Depositional and erosional coastal processes during the last postglacial sea-level rise: an example from the Central Tyrrhenian continental shelf (Italy). J. Sed. Res. 66, 391-405.; Fornós, J.J., Ahr, W.M., 1997. Temperate carbonates on a modern, low-energy, isolated ramp: the Balearic Platform, Spain. Journal of Sedimentary Research , 67, 364-373.; Fornós, J.J., Ahr, W.M., 2006. Present-day temperate carbonate sedimentation on the Balearic Platform, western Mediterranean: compositional and textural variation along a low-energy isolated ramp. In: Pedley, H.M., Carannante, G. (Eds.) 2006, Cool-water Carbonates: Depositional Systems and Palaeoenvironmental Controls. Geological Society, London, Special Publications, 255, pp. 121-135], the interactions between carbonate and terrigenous-siliciclastic sedimentation has not been documented well enough. A total of 33 surface sediment samples from the Pontinian shelf (Tyrrhenian Sea, central Mediterranean) have been analysed. Sampling stations range from 15 to 250 mwd (meter water depth) and are located along five transects (PonzaW, PonzaNW, Ponza NE, Ponza E, Zannone), plus four samples collected around Palmarola Island. Sectors colonized by seagrass meadows have not been sampled. A total of 6 sedimentary facies (F) and 10 microfacies (mf) have been recognized by using component analyses, grain size percentage, sorting, carbonate content and authigenic mineralization rate. These facies and microfacies represent the Pontian Islands shelf sedimentation, in the interval between the upper infralittoral and the epibathyal zones that represent shelf-break and upper slope sedimentation. The Maerl facies (F4a,b; mf4a,b) and the skeletal sands (F2a,b; mf2a1, mf2a2, mf2b) fall within the circalittoral zone. The circalittoral zone in the water depth interval between 82 m and 112 m display relict facies (F6, mf6). Finally facies F5 (Siliciclastic sands) includes subfacies F5b (mf5b), located in the circalittoral zone at depths of 49 to 101 mwd and restricted to the western and eastern sectors of Ponza, and subfacies F5a in the upper infralittoral zone (15 mwd/25 mwd) where erosional processes prevail. Carbonate content analyses indicate that maximum carbonate production on the Pontinian shelf took place in the 60-80 mwd interval. Facies F4 (Maerl) represents the environment characterized by the highest carbonate production rates. In the Pontian area siliciclastic-carbonate mixing took place in the infralittoral zone and in the lower circalittoral zone. In the infralittoral zone erosional processes on the rocky shoreline produced lithoclasts and vulcanoclastic deposits that were reworked by wave-induced near-shore currents. In the lower circalittoral zone the prolific production by photic biota (red algae) ends, while skeletal remains of the aphotic environment mixes with planktonic sediments characterized by low carbonate values. Sand (63 μm-2 mm) is the dominant grain size class, however gravel-dominated facies (F4 Maerl) are present in water depths (50 to 112 mwd) which are significantly below the storm wave base. Glauconite mineralization appears on the Pontinian shelf from 50 mwd and increases in abundance along the deeper bathymetries. The compositional characteristics of relict facies F6 shows the concurrence of biota assemblages of the infralittoral and circalittoral zones, likely representing the record of the last Holocene transgressive event (18 ky) and expressed by the overlapping of components of different environments.

Deep-sea fan deposition of the lower Tertiary Orca Group, eastern Prince William Sound, Alaska

USGS Publications Warehouse

Winkler, Gary R.

1976-01-01

The Orca Group is a thick, complexly deformed, sparsely fossiliferous sequence of flysch-like sedimentary and tholeiitic volcanic rocks of middle or late Paleocene age that crops out over an area of. roughly 21,000 km2 in the Prince William Sound region and the adjacent Chugach Mountains. The Orca Group also probably underlies a large part of the Gulf of Alaska Tertiary province and the continental shelf south of the outcrop belt; coextensive rocks to the southwest on Kodiak Island are called the Ghost Rocks and Sitkalidak Formations. The Orca Group was pervasively faulted, tightly folded, and metamorphosed regionally to laumontite and prehnite-pumpellyite facies prior to, and perhaps concurrently with, intrusion of early Eocene granodiorite and quartz monzonite plutons. In eastern Prince William Sound, 95% of the Orca sedimentary rocks are interbedded feldspathic and lithofeldspathic sandstone, siltstone, and mudstone turbidites. Lithic components vary widely in abundance and composition, but labile sedimentary and volcanic grains dominate. A widespread yet minor amount of the mudstone is hemipelagic or pelagic, with scattered foraminifers. Pebbly mudstone with rounded clasts of exotic lithologies and locally conglomerate with angular blocks of deformed sandstone identical to the enclosing matrix are interbedded with the turbidites. Thick and thin tabular bodies of altered tholeiitic basalt are locally and regionally conformable with the sedimentary rocks, and constitute 15-20% of Orca outcrops in eastern Prince William Sound. The basalt consists chiefly of pillowed and nonpillowed flows, but also includes minor pillow breccia, tuff, and intrusive rocks. Nonvolcanic turbidites are interbedded with the basalt; lenticular bioclastic limestone, red and green mudstone, chert, and conglomerate locally overlie the basalt, but are supplanted upward by turbidites. From west to east, basalts within the Orca Group become increasingly fragmental and amygdaloidal. Such textural changes probably indicate shallower water to the east. A radial distribution of paleocurrents and distinctive associations of turbidite facies within the sedimentary rocks suggest that the Orca Group in eastern Prince William Sound was deposited on a westward-sloping, complex deep-sea fan. Detritus was derived primarily from 'tectonized' sedimentary, volcanic, and plutonic rocks. Coeval submarine volcanism resulted in intercalation of basalt within prisms of terrigenous sediment.

Modeling the Sedimentary Infill of Lakes in the East African Rift: A Case Study of Multiple versus Single Rift Basin Segments

NASA Astrophysics Data System (ADS)

Zhang, C.; Scholz, C. A.

2016-12-01

The sedimentary basins in the East African Rift are considered excellent modern examples for investigating sedimentary infilling and evolution of extensional systems. Some lakes in the western branch of the rift have formed within single-segment systems, and include Lake Albert and Lake Edward. The largest and oldest lakes developed within multi-segment systems, and these include Lake Tanganyika and Lake Malawi. This research aims to explore processes of erosion and sedimentary infilling of the catchment area in single-segment rift (SSR) and multi-segment rift (MSR) systems. We consider different conditions of regional precipitation and evaporation, and assess the resulting facies architecture through forward modeling, using state-of-the-art commercial basin modeling software. Dionisos is a three-dimensional numerical stratigraphic forward modeling software program, which simulates basin-scale sediment transport based on empirical water- and gravity-driven diffusion equations. It was classically used to quantify the sedimentary architecture and basin infilling of both marine siliciclastic and carbonate environments. However, we apply this approach to continental rift basin environments. In this research, two scenarios are developed, one for a MSR and the other for a SSR. The modeled systems simulate the ratio of drainage area and lake surface area observed in modern Lake Tanganyika and Lake Albert, which are examples of MSRs and SSRs, respectively. The main parameters, such as maximum subsidence rate, water- and gravity-driven diffusion coefficients, rainfall, and evaporation, are approximated using these real-world examples. The results of 5 million year model runs with 50,000 year time steps show that MSRs are characterized by a deep water lake with relatively modest sediment accumulation, while the SSRs are characterized by a nearly overfilled lake with shallow water depths and thick sediment accumulation. The preliminary modeling results conform to the features of sedimentary infills revealed by seismic reflection data acquired in Lake Tanganyika and Lake Albert. Future models will refine the parameters of rainfall and evaporation in these two scenarios to better evaluate detailed basin facies architecture.

Braided fluvial sedimentation in the lower paleozoic cape basin, South Africa

NASA Astrophysics Data System (ADS)

Vos, Richard G.; Tankard, Anthony J.

1981-07-01

Lower Paleozoic braided stream deposits from the Piekenier Formation in the Cape Province, South Africa, provide information on lateral and vertical facies variability in an alluvial plain complex influenced by a moderate to high runoff. Four braided stream facies are recognized on the basis of distinct lithologies and assemblages of sedimentary structures. A lower facies, dominated by upward-fining conglomerate to sandstone and mudstone channel fill sequences, is interpreted as a middle to lower alluvial plain deposit with significant suspended load sedimentation in areas of moderate to low gradients. These deposits are succeeded by longitudinal conglomerate bars which are attributed to middle to upper alluvial plain sedimentation with steeper gradients. This facies is in turn overlain by braid bar complexes of large-scale transverse to linguoid dunes consisting of coarse-grained pebbly sandstones with conglomerate lenses. These bar complexes are compared with environments of the Recent Platte River. They represent a middle to lower alluvial plain facies with moderate gradients and no significant suspended load sedimentation or vegetation to stabilize channels. These bar complexes interfinger basinward with plane bedded medium to coarse-grained sandstones interpreted as sheet flood deposits over the distal portions of an alluvial plain with low gradients and lacking fine-grained detritus or vegetation.

Sandstone dykes in siwalik sandstone-sedimentology and basin analysis-subansiri district (NEFA), Eastern Himalaya

NASA Astrophysics Data System (ADS)

Kumar, Surendar; Singh, Trilochan

1982-11-01

Sandstone dykes (including sills) of varied thickness and with tapering ends are present either transecting or (sills) parallel to bedding in the Siwalik sandstone of Arunachal Pradesh (NEFA), Eastern Himalaya. The different sedimentary and microstructural analyses show varied conditions of deposition with changing facies from fluvial channel, to alluvial fan, to coastal plain-fan delta. The non-marine and shallow marine environments are indicated by the presence of organised and disorganised gradation and the presence of sandstone dykes in the interface regions. The orientations of the longer axes of the conglomerate along with the sand bedding indicate palaeoflow.

Utilization of digital LANDSAT imagery for the study of granitoid bodies in Rondonia: Case example of the Pedra Branca massif

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Almeidafilho, R.; Payolla, B. L.; Depinho, O. G.; Bettencourt, J. S.

1984-01-01

Analysis of digital multispectral MSS-LANDSAT images enhanced through computer techniques and enlarged to a video scale of 1:100.000, show the main geological and structura features of the Pedra Branca granitic massif in Rondonia. These are not observed in aerial photographs or adar images. Field work shows that LANDSAT photogeological units correspond to different facies of granitic rocks in the Pedra Branca massif. Even under the particular characteristics of Amazonia (Tropical Forest, deep weathering, and Quaternary sedimentary covers), an adequate utilization of orbital remote sensing images can be important tools for the orientation of field works.

Sedimentary, tectonic, and sea-level controls on submarine fan and slope-apron turbidite systems

USGS Publications Warehouse

Stow, D.A.V.; Howell, D.G.; Nelson, C.H.

1984-01-01

To help understand factors that influence submarine fan deposition, we outline some of the principal sedimentary, tectonic, and sea-level controls involved in deep-water sedimentation, give some data on the rates at which they operate, and evaluate their probable effects. Three depositional end-member systems, two submarine fan types (elongate and radial), and a third nonfan, slope-apron system result primarily from variations in sediment type and supply. Tectonic setting and local and global sea-level changes further modify the nature of fan growth, the distribution of facies, and the resulting vertical stratigraphic sequences. ?? 1984 Springer-Verlag New York Inc.

Quantitative kinematic analysis within the Khlong Marui shear zone, southern Thailand

NASA Astrophysics Data System (ADS)

Kanjanapayont, Pitsanupong; Grasemann, Bernhard; Edwards, Michael A.; Fritz, Harald

2012-02-01

The NNE trending Khlong Marui shear zone has a strong geomorphic signal with marked fault-strike parallel topographic ridges. The lithologies within the strike-slip zone mainly consist of vertical layers of mylonitic meta-sedimentary rocks associated with orthogneisses, mylonitic granites, and pegmatitic veins. The pegmatitic veins concordantly intrude the mylonitic foliation but were sheared at the rims indicating syn-kinematic emplacement. Microstructures and mineral assemblages suggest that the rocks in the area have been metamorphosed at amphibolite facies and low to medium greenschist facies by the first deformation. The Khlong Marui shear zone was deformed under dextral simple shear flow with a small finite strain. The ductile-to-brittle deformation involves a period of exhumation of lenses of higher grade rocks together with low grade fault rocks probably associated with positive flower structures. The final stage brittle deformation is reflected by normal faulting and formation of proto-cataclasites to cataclasites of the original mylonitic meta-sedimentary host rock. Although clear age-constraints are still missing, we use regional relationships to speculate that earlier dextral strike-slip displacement of the Khlong Marui shear zone was related to the West Burma and Shan-Thai collision and subduction along the Sunda Trench in the Late Cretaceous, while the major exhumation period of the ductile lens was tectonically influenced by the early India-Asia collision. The changing stress field has responded by switching from dextral strike-slip to normal faulting in the Khlong Marui shear zone, and is associated with "escape tectonics" arising from the overall India-Asia collision.

Stratal stacking patterns and tectono-sedimentary evolution of hyperextended magma-poor rifted margins

NASA Astrophysics Data System (ADS)

Ribes, C.; Gillard, M.; Epin, M. E.; Ghienne, J. F.; Manatschal, G.; Karner, G. D.; Johnson, C. A.

2016-12-01

Research on the formation and evolution of deep-water rifted margins has undergone a major paradigm shift in recent years. An increasing number of studies of present-day and fossil rifted margins allow us to identify and characterize the structural architecture of the most distal parts of rifted margins, the so-called hyperextended, magma-poor rifted margins. However, at present, little is known about the depositional environments, sedimentary facies, stacking patterns, subsidence and thermal history within these domains. In this context, characterizing the stratal stacking patterns and understanding their spatial and temporal evolution is a new challenge. The major difficulty comes from the fact that the observed stratigraphic geometries and facies relationships are a result of the complex interplay between sediment supply and available accommodation, which is controlled by not only the regional generation of accommodation, but also by local tectono-magmatic processes. These parameters are poorly constrained or even sufficiently known in these tectonic settings. Indeed, the complex structural evolution of hyperextended magma-poor rifted margins, including the development of poly-phase in-sequence and out of sequence extensional detachment faults and associated mantle exhumation and magmatic activity, can generate complex accommodation patterns over a highly structured top basement. The presentation summarizes early results concerning the controlling parameters on ultra-deep water stratigraphic stacking patterns and to provide a conceptual framework. This observation-driven approach combines fieldwork from fossil Alpine Tethys margins exposed in the Alps and the analysis of seismic reflection data from present-day deep water rifted margins such as the Australian-Antarctic, East India and Iberia-Newfoundland margins.

Major Perspectives of The Dfg-research Programm (schwerpunktprogramm) Dynamics of Sedimentary Systems Under Varying Stress Conditions By Example of The Central European Basin-system

NASA Astrophysics Data System (ADS)

Bayer, U.; Littke, R.; Gajewski, D.; Brink, H.-J.

In 2001 a major research program "Dynamics of Sedimentary Systems under Varying Stress Conditions" has been established by the German Science Foundation (DFG). The programme effectively will start early in 2002 and in some sense provides a continuation of the EUROPROBE project TESZ. However, it will focus mainly on post-Paleozoic processes. The following sub-themes for this programme capture a wide range of areas of interest, calling for interdisciplinary research: 1. Structure and evolution of the crust. This topic will be based on the three- dimensional structural interpretation, pre-stack migration, and modelling of geophysi- cal data such as seismic, gravimetric, magnetic, and magnetotelluric data. The deriva- tion of interval velocities and the prediction of lateral inhomogeneities will be essential for the interpretation of rheological properties on one hand and historical geodynamic processes on the other. 2. Basin dynamics in space and time. Methods of basin anal- ysis, seismic stratigraphy,sedimentology, sequence- and event stratigraphy should be used in combination with subsidence analysis and basin modelling to interpret facies distributions within the evolving accomodation space of a sedimentary basin. An ad- vanced interpretation of seismic lines using new modelling tools is of key interest to extract facies patterns and related petrophysical properties for the three dimensional space of a sedimentary basin. 3. Fluid- and salt dynamics. Salt dynamics is related to the recent and historic stress fields of a basin and greatly governs the sedimentation and erosion processes at the surface. In addition, the rheology of the upper crust and the temperature field within sedimentary basins greatly depends on salt doming. Fluid dynamics is coupled to the temperature and pressure field, but depends also on the permeability of sedimentary rocks which varies by more than 15 orders of magnitude. The origin of non-hydrocarbon gases (CO2, N2, H2S), each dominating over methane in specific provinces of the Central European Basin as well as in many other basins 1 worldwide, is of special interest. 4. Recent state and young processes. It is the inten- tion to develop an understanding of the most recent structural and sedimentological evolution as a response to processes intrinsic to the basin or related to external causes, including glaciation periods in the Quaternary. In particular, knowledge about recently active fault systems and salt doming will be of crucial importance for any future risk assessment, e.g. with respect to the protection of coast lines and landscapes. All above mentioned topics will benefit from the further development of modelling tools for non-linear transport processes, including compaction, porosity- and perme- ability evolution, temperature evolution, maturation of organic matter and clay miner- als, diagenesis, and fluid flow. 2

Sedimentology and palaeontology of the Upper Jurassic Puesto Almada Member (Cañadón Asfalto Formation, Fossati sub-basin), Patagonia Argentina: Palaeoenvironmental and climatic significance

NASA Astrophysics Data System (ADS)

Cabaleri, Nora G.; Benavente, Cecilia A.; Monferran, Mateo D.; Narváez, Paula L.; Volkheimer, Wolfgang; Gallego, Oscar F.; Do Campo, Margarita D.

2013-10-01

Six facies associations are described for the Puesto Almada Member at the Cerro Bandera locality (Fossati sub-basin). They correspond to lacustrine, palustrine, and pedogenic deposits (limestones); and subordinated alluvial fan, fluvial, aeolian, and pyroclastic deposits. The lacustrine-palustrine depositional setting consisted of carbonate alkaline shallow lakes surrounded by flooded areas in a low-lying topography. The facies associations constitute four shallowing upward successions defined by local exposure surfaces: 1) a Lacustrine-Palustrine-pedogenic facies association with a 'conchostracan'-ostracod association; 2) a Palustrine facies association representing a wetland subenvironment, and yielding 'conchostracans', body remains of insects, fish scales, ichnofossils, and palynomorphs (cheirolepidiacean species and ferns growing around water bodies, and other gymnosperms in more elevated areas); 3) an Alluvial fan facies association indicating the source of sediment supply; and 4) a Lacustrine facies association representing a second wetland episode, and yielding 'conchostracans', insect ichnofossils, and a palynoflora mainly consisting of planktonic green algae associated with hygrophile elements. The invertebrate fossil assemblage found contains the first record of fossil insect bodies (Insecta-Hemiptera and Coleoptera) for the Cañadón Asfalto Formation. The succession reflects a mainly climatic control over sedimentation. The sedimentary features of the Puesto Almada Member are in accordance with an arid climatic scenario across the Upper Jurassic, and they reflect a strong seasonality with periods of higher humidity represented by wetlands and lacustrine sediments.

Facies and Depositional History of Arc-Related, Deep-Marine Volcaniclastic Rocks in Core Recovered on International Ocean Discovery Program Expedition 351, Philippine Sea

NASA Astrophysics Data System (ADS)

Johnson, K. E.; Waldman, R.; Marsaglia, K. M.

2016-12-01

The Izu-Bonin-Mariana (IBM) Arc System, south of Japan, hosts a multitude of active and extinct (remnant) volcanic arcs and associated basins partly filled with volcanic sediment. Core extracted adjacent to the proto-IBM arc (Kyushu-Palau Ridge; KPR), in the Amami-Sankaku Basin (ASB) during International Ocean Discovery Program (IODP) Expedition 351, contains an incredibly well-preserved record of backarc sedimentation resulting from changing tectonic regimes during arc development and decline. Approximately 1000 meters of Eocene to Oligocene volcaniclastic sedimentary rocks were analyzed via shipboard core photos, core descriptions, and thin sections with the intention of understanding the depositional history at this site. A database of stratigraphic columns, 539 section and 147 core summaries, was created to display grain size trends, sedimentary structures, bedding characteristics, and facies changes. Individual depositional events were classified using existing and slightly modified classification schemes for muddy, sandy, and gravel-rich gravity flow deposits, as well as muddy deposits and tuffs. Downhole trends show repeating coarsening-upward intervals that grade from fine-grained turbidites to coarser turbidites and debrites. These trends indicate how the active depositional systems evolved upsection as the arc matured. Following arc initiation, facies deposited were primarily mud-rich; these coarsened-upward into 12 stacked sequences of submarine lobe and channel facies with sediment from one or more volcanic sources. These are interpreted to represent the building of the arc edifice that began 41 Ma. Four distinct periods of coarse lobe accumulation created a thick submarine fan over a period of nearly 13 million years. An abrupt shift to muddy turbidites at 30 Ma represents the onset of rifting of the paleo-IBM arc as backarc spreading in the Shikoku Basin was initiated and volcaniclastic supply to the ASB waned with formation of the KPR remnant arc.

Sedimentary Facies and their possible significance in Holocene paleoclimate reconstruction: Example of Baraila Tal, Central Ganga Plains

NASA Astrophysics Data System (ADS)

Misra, Pavani; Sinha, Rajiv; Tandon, Sampat Kumar

2016-04-01

To seek insights into natural climate variability on decadal/ centennial or half-millennial scale, we need to examine Holocene stratigraphic records. Due to the paucity of high-resolution Holocene continental records in India, Holocene climate change has mostly been studied from the marine sediments. Since agricultural communities are sustained by the resources of large river basins, it is important to understand the response of these systems directly to any climate change. The fluvial archive itself offers a relatively low resolution record, but the ox-bows and meander cut-offs in these basins act as semi-closed systems and hence offer the possibility of obtaining better time resolved stratigraphic data. Therefore, lakes from Central Ganga Plains can be regarded as good terrestrial archives; these have been inadequately investigated as compared to the lakes in western India which have been studied with multi-proxy approaches and show major abrupt climatic disruptions. Previous work on some of the lakes in the Central Ganga Plains is largely based on fossil pollen and commonly shows an alternating increase in tree pollen and grassland pollen representing a shifting trend of warm and humid conditions (from 12,500 to 6,400 and 4,800 to 2000 cal yrs BP), to cold and dry spells, respectively. Lake organic facies from Sanai Tal follow an increasing trend of δ13C values from 15,000 to 5,800 14C yr BP, which indicate an enhanced aquatic productivity during that period, except between 11,500 to 10,500 14C yr BP when lighter δ13C values are observed (Sharma et al., 2004), indicating a dry climate for this short period. Against the above background of previous studies, the Baraila Tal, a lake in the Central Ganga Plains has been chosen to obtain a relatively better time-resolved stratigraphy and to characterize its lithofacies for assessing proxy-paleoclimatic data. We have carried out sedimentary facies analysis for three trenches in the Baraila Tal; the major sand, silt and clay facies are subdivided into 21 sub-facies. One of the trenches has been studied for its clay mineralogy, TOC and grain size distribution, using XRD, Rock Eval pyrolysis and the wet sieving method, respectively. High resolution chronology will be based on AMS C-14 dates. These data will then be assessed for their utility as proxy-indicators of past climate. Reference: Sharma S., Joachimski M., Sharma M., Tobschall H.J., Singh I.B., Sharma C., Chauhan M.S., Morgenroth G., 2004. Lateglacial and Holocene environmental changes in Ganga plain, Northern India. Quaternary Science Review, 23: 145-159

Evolution of sedimentary architecture in retro-foreland basin: Aquitaine basin example from Paleocene to lower Eocene.

NASA Astrophysics Data System (ADS)

Ortega, Carole; Lasseur, Eric; Guillocheau, François; Serrano, Olivier; Malet, David

2017-04-01

The Aquitaine basin located in south western Europe, is a Pyrenean retro-foreland basin. Two main phases of compression are recorded in this retro-foreland basin during the Pyrenean orogeny. A first upper Cretaceous phase corresponding to the early stage of the orogeny, and a second one usually related to a Pyrenean paroxysmal phase during the middle Eocene. During Paleocene to lower Eocene deformations are less pronounced, interpreted as a tectonically quiet period. The aim of the study is to better constrain the sedimentary system of the Aquitaine basin during this period of Paleocene-lower Eocene, in order to discuss the evolution of the sedimentary architecture in response of the Pyrenean compression. This work is based on a compilation of a large set of subsurface data (wells logs, seismic lines and cores logs) represented by isopachs and facies map. Three main cycles were identified during this structural quiet period: (1) The Danian cycle, is recorded by the aggradation of carbonate reef-rimmed platform. This platform is characterized by proximal facies (oncoid carbonate and mudstone with thalassinoides) to the north, which leads to distal deposit facies southern (pelagic carbonate with globigerina and slump facies) and present a significant thickness variation linked to the platform-slope-basin morphology. (2) The upper Selandian-Thanetian cycle follows a non-depositional/erosional surface associated with a Selandian hiatus. The base of this cycle marked the transition between the last reef rimmed platform and a carbonate ramp. The transgressive cycle is characterized by proximal lagoon facies to the north that leads southward to distal hemipelagic facies interfingered by turbiditic Lowstand System Tracks (LST). The location of these LST is strongly controlled by inherited Danian topography. The regressive cycle ends with a major regression associated with an erosional surface. This surface is linked with a network of canyons in the north, an important terrigeneous LST and a massive erosional surface in deep basin. We correlated this upper Thanetian major regression with a flexural deformation of the basin. In this context, the importance of terrigeneous LST could be explained by the erosion of the East Pyrenean range. (3) The lower Ypresian records the installation of mixed terrigenous-carbonated system. While the East-West progradation of siliciclastic deltas is drained into foreland basin, a carbonates condensation are developed on structural ridges, attesting the structural activation of foreland basin during lower Ypresian. This study shows that Danian to middle Thanetian time represents a quiet tectonic period in the retro-foreland basin. During the upper Thanetian period, the compressive deformation is increasing, marked by the emersion of the northern platform, a massive LST in distal environment and a rise of terrigenous input in flexural basin (LST). This deformation associated with the Pyrenean compression continues during the Ypresian and highlights the paroxysm of the Pyrenean orogeny. This work is included in the Gaia project founded by TIGF, BRGM and Agence de l'Eau Adour/Garonne whose aim at constrain the nature and dynamics of deep Upper cretaceous and Tertiary aquifers of the Aquitaine basin.

Footwall degradation styles and associated sedimentary facies distribution in SE Crete: Insights into tilt-block extensional basins on continental margins

NASA Astrophysics Data System (ADS)

Alves, Tiago M.; Cupkovic, Tomas

2018-05-01

Depositional facies resulting from footwall degradation in extensional basins of SE Crete are studied based on detailed geological maps, regional transects, lithological columns and outcrop photos. During an extensional episode affecting Crete in the late Miocene-early Pliocene, depocentres trending N20°E and N70°E were filled with fan deltas, submarine mass-wasting deposits, sandy turbidites and fine-grained hemipelagites sourced from both nearby and distal sediment sources. Deposition of proximal continental and shallow-marine units, and relatively deep (marine) turbidites and mass-transport deposits, occurred within a complex mosaic of tectonically controlled depocentres. The new geological maps and transects in this work reveal that depositional facies in SE Crete were controlled by: a) their relative proximity to active faults and uplifting footwall blocks, b) the relative position (depth and relative height above sea level) of hanging-wall basins, and c) the nature of the basement units eroded from adjacent footwall blocks. Distal sediment sources supplied background siliciclastic sediment ('hemipelagites'), which differ markedly from strata sourced from local footwalls. In parallel, mass-transport of sediment was ubiquitous on tectonically active slopes, and so was the presence of coarse-grained sediment with sizes varying from large blocks > 50 m-wide to heterolithic mass-transport deposits and silty-sandy turbidites. We expect similar tectono-sedimentary settings to have predominated in tectonically active Miocene basins of the eastern Mediterranean, in which hydrocarbon exploration is occurring at present, and on rifted continental margins across the world.

Oxygen isotope evidence for submarine hydrothermal alteration of the Del Puerto ophiolite, California

USGS Publications Warehouse

Schiffman, P.; Williams, A.E.; Evarts, R.C.

1984-01-01

The oxygen isotope compositions and metamorphic mineral assemblages of hydrothermally altered rocks from the Del Puerto ophiolite and overlying volcaniclastic sedimentary rocks at the base of the Great Valley sequence indicate that their alteration occurred in a submarine hydrothermal system. Whole rock ??18O compositions decrease progressively down section (with increasing metamorphic grade): +22.4??? (SMOW) to +13.8 for zeolite-bearing volcaniclastic sedimentary rocks overlying the ophiolite; +19.6 to +11.6 for pumpellyite-bearing metavolcanic rocks in the upper part of the ophiolite's volcanic member; +12.3 to +8.1 for epidote-bearing metavolcanic rocks in the lower part of the volcanic member; +8.5 to +5.7 for greenschist facies rocks from the ophiolite's plutonic member; +7.6 to +5.8 for amphibolite facies or unmetamorphosed rocks from the plutonic member. Modelling of fluid-rock interaction in the Del Puerto ophiolite indicates that the observed pattern of upward enrichment in whole rock ??18O can be best explained by isotopic exchange with discharging 18O-shifted seawater at fluid/rock mass ratios near 2 and temperatures below 500??C. 18O-depleted plutonic rocks necessarily produced during hydrothermal circulation were later removed as a result of tectonism. Submarine weathering and later burial metamorphism at the base of the Great Valley sequence cannot by itself have produced the zonation of hydrothermal minerals and the corresponding variations in oxygen isotope compositions. The pervasive zeolite and prehnite-pumpellyite facies mineral assemblages found in the Del Puerto ophiolite may reflect its origin near an island arc rather than deep ocean spreading center. ?? 1984.

Geochemical study of the Umkondo dolerites and lavas in the Chimanimani and Chipinge Districts (eastern Zimbabwe) and their regional implications

NASA Astrophysics Data System (ADS)

Munyanyiwa, Hubert

1999-02-01

The Umkondo Group is a supracrustal sequence cropping out in eastern Zimbabwe in the Nyanga, Chimanimani and Chipinge Districts. In these areas the sequence has been divided into a weakly metamorphosed and deformed unit of argillaceous, arenaceous and carbonate rocks (Zimbabwe facies) in the west, and a strongly deformed and medium- to high-grade metamorphosed sequence of mainly quartzites and metapelites (Mozambique facies) in the east. The two sequences were tectonically juxtaposed during the Neoproterozoic Pan-African Mozambique Belt deformation. The Zimbabwe facies sedimentary rocks are intruded by extensive dolerite sills and minor interlayered basalts flows. The mafic rocks are sub-alkaline continental tholeiites. They have low mg numbers associated with low Cr, Cu, Ni and Co, which indicate that the parental magma underwent some differentiation processes en route to the surface. They are LREE enriched with ( {La}/{Yb}N = 5.0-7.6 , high Ce/Yb (>10) and {La}/{Nb} (>0.5) values, and exhibit troughs at Nb, Sr, Ti and P on a MORB-normalised, multi-element spider diagram. These chemical characteristics, together with the large areal extent of the Umkondo dolerites and basalts, suggest that the Umkondo mafic igneous suite was once widespread and formed part of a continental flood basalt province. This is supported by the depositional environment (shallow water platform type setting) of the sedimentary sequence into which the mafic rocks were emplaced. The widespread occurrence of the Umkondo igneous event is further supported by the similarity in palæomagnetic poles of a number of mafic units in southern Africa.

A detrital garnet fingerprint of the Central Swiss Alps

NASA Astrophysics Data System (ADS)

Stutenbecker, Laura; Berger, Alfons; Schlunegger, Fritz

2017-04-01

Detrital garnet is a promising candidate to reliably fingerprint sediment sources in the Alps, which has so far been complicated by the wide range and similarity of some of the lithologies. Garnet is present in most Alpine sediments, is easy to identify, is fairly stable and, most importantly, reflects the type and the metamorphic grade of its source rock in its chemical composition. This study aims to establish fingerprints based on detrital garnet composition for the most important tectonic units of the Central Alps, including European, Penninic and Adriatic basement rocks and their respective meta-sedimentary cover. Sediments collected from modern rivers, which drain representative portions of the individual tectonic units, contain a natural mixture of the various garnet populations present in each unit. We selected six catchments in southwestern Switzerland draining the External Massifs, Helvetic sediments and the Penninic nappe stack at the transition of Alpine greenschist- to amphibolite-facies metamorphism in order to test the variability of Alpine garnets and the role of inherited (pre-Alpine) garnets. Extraordinary grossular- and spessartine-rich garnets of the External massifs, which experienced greenschist facies metamorphism, are clearly distinguishable from generally almandine-rich garnets supplied by the higher-grade metamorphic Penninic nappe stack. The variable pyrope-, grossular- and spessartine-components of these almandine-rich garnets can be used to further distinguish pre-Alpine, Alpine eclogite-facies and low-grade metasedimentary garnets. This fingerprint has the potential to be used for reconstructing sediment sources, transport and dispersal patterns in a variety of settings throughout the Alpine sedimentary record.

Nonpoint source solute transport normal to aquifer bedding in heterogeneous, Markov chain random fields

NASA Astrophysics Data System (ADS)

Zhang, Hua; Harter, Thomas; Sivakumar, Bellie

2006-06-01

Facies-based geostatistical models have become important tools for analyzing flow and mass transport processes in heterogeneous aquifers. Yet little is known about the relationship between these latter processes and the parameters of facies-based geostatistical models. In this study, we examine the transport of a nonpoint source solute normal (perpendicular) to the major bedding plane of an alluvial aquifer medium that contains multiple geologic facies, including interconnected, high-conductivity (coarse textured) facies. We also evaluate the dependence of the transport behavior on the parameters of the constitutive facies model. A facies-based Markov chain geostatistical model is used to quantify the spatial variability of the aquifer system's hydrostratigraphy. It is integrated with a groundwater flow model and a random walk particle transport model to estimate the solute traveltime probability density function (pdf) for solute flux from the water table to the bottom boundary (the production horizon) of the aquifer. The cases examined include two-, three-, and four-facies models, with mean length anisotropy ratios for horizontal to vertical facies, ek, from 25:1 to 300:1 and with a wide range of facies volume proportions (e.g., from 5 to 95% coarse-textured facies). Predictions of traveltime pdfs are found to be significantly affected by the number of hydrostratigraphic facies identified in the aquifer. Those predictions of traveltime pdfs also are affected by the proportions of coarse-textured sediments, the mean length of the facies (particularly the ratio of length to thickness of coarse materials), and, to a lesser degree, the juxtapositional preference among the hydrostratigraphic facies. In transport normal to the sedimentary bedding plane, traveltime is not lognormally distributed as is often assumed. Also, macrodispersive behavior (variance of the traveltime) is found not to be a unique function of the conductivity variance. For the parameter range examined, the third moment of the traveltime pdf varies from negatively skewed to strongly positively skewed. We also show that the Markov chain approach may give significantly different traveltime distributions when compared to the more commonly used Gaussian random field approach, even when the first- and second-order moments in the geostatistical distribution of the lnK field are identical. The choice of the appropriate geostatistical model is therefore critical in the assessment of nonpoint source transport, and uncertainty about that choice must be considered in evaluating the results.

Identifying and Interpreting Stratification in Sedimentary Rocks on Mars: Insight from Rover and Orbital Observations and Terrestrial Field Analogs

NASA Astrophysics Data System (ADS)

Edgar, Lauren A.

Sedimentary rocks on Mars provide insight into past aqueous and atmospheric processes, climate regimes, and potential habitability. The stratigraphic architecture of sedimentary rocks on Mars is similar to that of Earth, indicating that the processes that govern deposition and erosion on Mars can be reasonably inferred through reference to analogous terrestrial systems. This dissertation aims to understand Martian surface processes through the use of (1) ground-based observations from the Mars Exploration Rovers, (2) orbital data from the High Resolution Imaging Science Experiment onboard the Mars Reconnaissance Orbiter, and (3) the use of terrestrial field analogs to understand bedforms and sediment transport on Mars. Chapters 1 and 2 trace the history of aqueous activity at Meridiani Planum, through the reconstruction of eolian bedforms at Victoria crater, and the identification of a potential mudstone facies at Santa Maria crater. Chapter 3 uses Terrestrial Laser Scanning to study cross-bedding in pyroclastic surge deposits on Earth in order to understand sediment transport in these events and to establish criteria for their identification on Mars. The final chapter analyzes stratal geometries in the Martian North Polar Layered Deposits using tools for sequence stratigraphic analysis, to better constrain past surface processes and past climate conditions on Mars.

Facies, Stratigraphic and Depositional Model of the Sediments in the Abrolhos Archipelago (Bahia, BRAZIL)

NASA Astrophysics Data System (ADS)

Matte, R. R.; Zambonato, E. E.

2012-04-01

Located in the Mucuri Basin on the continental shelf of southern Bahia state, northeast Brazil, about 70 km from the city of Caravelas,the Abrolhos archipelago is made up of five islands; Santa Barbara, Redonda, Siriba, Guarita and Sueste. The exhumed sediments in the Abrolhos archipelago are a rare record of the turbidite systems which fill the Brazilian Atlantic Basin, and are probably an unprecedented example of a plataform turbidite system (Dr. Mutti, personal communication). Despite the limited area, the outcrops display a wide facies variation produced by different depositional processes, and also allow for the observation of the layer geometries. Associated with such sedimentary rocks, the Abrolhos Volcanic Complex belongs stratigraphically to the Abrolhos Formation. These igneous rocks were dated by the Ar / Ar method, with ages ranging from 60 to 40 My, placing such Volcanic Complex between the Paleocene and Eocene. The sedimentary section is best exposed in the Santa Barbara and Redonda islands and altogether it is 70 m thick. The measured vertical sections show a good stratigraphic correlation between the rocks of the western portion of the first island and those of Redonda Island. However, there is no correlation between the eastern and western portions of Santa Barbara Island, since they are very likely interrupted by the igneous intrusion and possibly by faulting. The sedimentary stack consists of deposits with alternated regressive and transgressive episodes interpreted as high frequency sequences. The coarse facies, sandstones and conglomerates, with abrupt or erosive bases record regressive phases. On the other hand, finer sandstones and siltstones facies, which are partly bioturbated, correspond to phases of a little sediment supply. In the central and eastern portions of Santa Barbara Island, there is a trend of progradational stacking, while both in the western portion of Santa Barbara and in Redonda islands an agradational trend is observed. The predominance of layers with tabular geometry, characteristic of turbidite lobes, the presence of hummocky stratification, trace fossils typical of shallow water (Ophiomorphs and Thalassinoides), all associated with the occurrence of the carbonaceous material as well as plant fragments suggest a deltaic/ plataform depositional context. Textural features and sedimentary structures observed in the conglomerates and sandstones show the action of gravitational flows of high and low density. The fine interlaminated sandstones and siltstones later deformed as slumps or slides, and conglomerates with oriented clasts indicate, respectively, mass movements and action of debris flow. Conglomeratic lags levels record a bypass phenomenon. There are no biostratigraphic data in these studied outcrops. However, petrographic analyses revealed the presence of fragments of igneous rocks (basalts and diabases) in both sandstones and conglomerates, suggesting a relative contemporaneity between igneous activity and sediment deposition. Futhermore, petrographic analyses also found poor permo-porous conditions in the reservoirs due to the presence of fragments of volcanic rocks and the abundance of intraclasts / pseudomatrix.

Sediments of the Dry Tortugas, south Florida, USA: Facies distribution on a ramp-like isolated carbonate platform

NASA Astrophysics Data System (ADS)

Gischler, Eberhard; Isaack, Anja; Hudson, J. Harold

2017-04-01

Four sedimentary facies may be delineated based on quantitative analysis of texture and composition of modern surface sediments on the Dry Tortugas carbonate platform. These include (1) mollusk-Halimeda wackestone, (2) mollusk packstone-to-grainstone, (3) coralgal-Halimeda grainstone, and (4) coralgal grainstone. Even though the Tortugas platform is characterized by an open circulation due to deep, broad marginal channels and a lack of a continuous surface-breaking marginal reef, facies are not distributed at random and show bathymetrical zonation. Also, facies appear to cover wide belts rather than forming a mosaic. Mollusk-Halimeda wackestone occurs in protected platform interior areas ca. 10-18 m deep. Mollusk packstone-to-grainstone occurs in more open platform interior settings adjacent to channels and in deeper outer reef areas of 14-25 m water depth. Coralgal-Halimeda grainstone is found on shallow marginal shoals (1-11 m deep), and coralgal grainstone on the somewhat deeper (3-16 m), seaward edges of these shoals. However, there is bathymetrical overlap of facies in intermediate depths of ca. 5-17 m. This limitation has implications for the interpretation of the fossil record, because changes in water depth are commonly thought to be reflected in facies changes, e.g., in sequence stratigraphy. Comparison with previous sediment studies of the 1930s, 1960s, and 1970s in the area exhibit a decrease in coral fragments and increases in coralline algal and mollusk shell fragments. These observations might be a result of environmental changes such as coral decline and die-outs during temperature events, disease, and the increase in macroalgae (due to the ecological extinction of the echinoid Diadema). The results suggest that more long-term studies are needed that further explore the influence of environmental change on reef sediment composition. Dry Tortugas surface sediments consist of lower portions of Halimeda plates and mollusk shell fragments and higher percentages of coralline algal fragments as compared to sediments of the adjacent Florida Reef Tract, possibly as a consequence of differences in platform morphology and exposure to waves and currents.

Microfacies and depositional environments of the Late Ordovician Lianglitage Formation at the Tazhong Uplift in the Tarim Basin of Northwest China

NASA Astrophysics Data System (ADS)

Gao, Da; Lin, Changsong; Yang, Haijun; Zuo, Fanfan; Cai, Zhenzhong; Zhang, Lijuan; Liu, Jingyan; Li, Hong

2014-04-01

The Late Ordovician Lianglitage Formation comprises 13 microfacies (Mf1-Mf13) that were deposited on a carbonate platform at the Tazhong Uplift of the Tarim Basin in Northwest China. Each type of microfacies indicates a specific depositional environment with a certain level of wave energy. Four primary groups of microfacies associations (MA1-MA4) were determined. These associations represent different depositional facies, including reef-shoal facies in the platform margin (MA1), carbonate sand shoal facies (MA2) and oncoid shoal (MA3) on open platforms, and lagoon and tidal flat facies (MA4) in the platform interior. Each microfacies association was generated in a fourth-order sedimentary sequence developing within third-order sequences (SQ1, SQ2, and SQ3, from bottom to top), showing a shallowing-upward trend. High-frequency sequences and facies correlation between wells suggests that the reef-shoal facies more successively developed in the southeastern part of the platform margin, and high-energy microfacies were more strictly confined by the top boundary of fourth-order sequences in the northwestern part of the platform. The highstand systems tract (HST) of the SQ2 is characterized by reef-shoals that developed along the platform margin and tidal flats and lagoons that developed in the platform interior, while the SQ3 is characterized by the oncoid shoal facies that generally developed on the uplift due to a regionally extensive transgression that occurred during the latter part of the Late Ordovician. The results of this study can be used for investigating the development and distribution of potential reservoirs; the reservoirs in southeastern part of the platform margin may be of premium quality because the high-energy microfacies were best preserved there.

Field-scale forward modelling of a shallow marine carbonate ramp: the Upper Jurassic Arab Formation (onshore Abu Dhabi - UAE)

NASA Astrophysics Data System (ADS)

Marchionda, Elisabetta; Deschamps, Rémy; Nader, Fadi H.; Ceriani, Andrea; Di Giulio, Andrea; Lawrence, David; Morad, Daniel J.

2017-04-01

The stratigraphic record of a carbonate system is the result of the interplay of several local and global factors that control the physical and the biological responses within a basin. Conceptual models cannot be detailed enough to take into account all the processes that control the deposition of sediments. The evaluation of the key controlling parameters on the sedimentation can be investigated with the use of stratigraphic forward models, that permit dynamic and quantitative simulations of the sedimentary basin infill. This work focuses on an onshore Abu Dhabi field (UAE) and it aims to provide a complete picture of the stratigraphic evolution of Upper Jurassic Arab Formation (Fm.). In this study, we started with the definition of the field-scale conceptual depositional model of the Formation, resulting from facies and well log analysis based on five wells. The Arab Fm. could be defined as a shallow marine carbonate ramp, that ranges from outer ramp deposits to supratidal/evaporitic facies association (from bottom to top). With the reconstruction of the sequence stratigraphic pattern and several paleofacies maps, it was possible to suggest multiple directions of progradations at local scale. Then, a 3D forward modelling tool has been used to i) identify and quantify the controlling parameters on geometries and facies distribution of the Arab Fm.; ii) predict the stratigraphic architecture of the Arab Fm.; and iii) integrate and validate the conceptual model. Numerous constraints were set during the different simulations and sensitivity analyses were performed testing the carbonate production, eustatic oscillations and transport parameters. To verify the geological consistency the 3D forward modelling has been calibrated with the available control points (five wells) in terms of thickness and facies distribution.

Late Holocene sedimentary environments of south San Francisco Bay, California, illustrated in gravity cores

USGS Publications Warehouse

Woodrow, Donald L.; Fregoso, Theresa A.; Wong, Florence L.; Jaffe, Bruce E.

2014-01-01

Data are reported here from 51 gravity cores collected from the southern part of San Francisco Bay by the U.S. Geological Survey in 1990. The sedimentary record in the cores demonstrates a stable geographic distribution of facies and spans a few thousand years. Carbon-14 dating of the sediments suggests that sedimentation rates average about 1 mm/yr. The geometry of the bay floor and the character of the sediment deposited have remained about the same in the time spanned by the cores. However, the sedimentary record over periods of centuries or decades is likely to be much more variable. Sediments containing a few bivalve shells and bivalve or oyster coquinas are most often found west of the main channel and near the San Mateo Bridge. Elsewhere in the south bay, shells are rare except in the southernmost reaches where scattered gastropod shells are found.

Evolution of the Lian River coastal basin in response to Quaternary marine transgressions in Southeast China

NASA Astrophysics Data System (ADS)

Tang, Yongjie; Zheng, Zhuo; Chen, Cong; Wang, Mengyuan; Chen, Bishan

2018-04-01

The coastal basin deposit in the Lian River plain is among the thickest Quaternary sequences along the southeastern coast of China. The clastic sediment accumulated in a variety of environmental settings including fluvial, channel, estuary/coastal and marine conditions. Detailed investigation of lithofacies, grain-size distributions, magnetic susceptibility, microfossils and chronology of marine core CN01, compared with regional cores, and combined with offshore seismic reflection profiles, has allowed us to correlate the spatial stratigraphy in the inner and outer plain and the seismic units. Grain size distribution analysis of core CN-01 through compositional data analysis and multivariate statistics were applied to clastic sedimentary facies and sedimentary cycles. Results show that these methods are able to derive a robust proxy information for the depositional environment of the Lian River plain. We have also been able to reconstruct deltaic evolution in response to marine transgressions. On the basis of dating results and chronostratigraphy, the estimated age of the onset of deposition in the Lian River coastal plain was more than 260 kyr BP. Three transgressive sedimentary cycles revealed in many regional cores support this age model. Detailed lithological and microfossil studies confirm that three marine (M3, M2 and M1) and three terrestrial (T3, T2 and T1) units can be distinguished. Spatial correlation between the inner plain, outer plain (typical cores characterized by marine transgression cycles) and offshore seismic reflectors reveals coherent sedimentary sequences. Two major boundaries (unconformity and erosion surfaces) can be recognized in the seismic profiles, and these correspond to weathered reddish and/or variegated clay in the study core, suggesting that Quaternary sediment changes on the Lian River plain were largely controlled by sea-level variations and coastline shift during glacial/interglacial cycles.

Estimates of chemical compaction and maximum burial depth from bedding parallel stylolites

NASA Astrophysics Data System (ADS)

Gasparrini, Marta; Beaudoin, Nicolas; Lacombe, Olivier; David, Marie-Eleonore; Youssef, Souhail; Koehn, Daniel

2017-04-01

Chemical compaction is a diagenetic process affecting sedimentary series during burial that develops rough dissolution surfaces named Bedding Parallel Stylolites (BPS). BPS are related to the dissolution of important rock volumes and can lead to porosity reduction around them due to post-dissolution cementation. Our understanding of the effect of chemical compaction on rock volume and porosity evolution during basin burial is however too tight yet to be fully taken into account in basin models and thermal or fluid-flow simulations. This contribution presents a novel and multidisciplinary approach to quantify chemical compaction and to estimate maximum paleodepth of burial, applied to the Dogger carbonate reservoirs from the Paris Basin sub-surface. This succession experienced a relatively simple burial history (nearly continuous burial from Upper Jurassic to Upper Cretaceous, followed by a main uplift phase), and mainly underwent normal overburden (inducing development of BPS), escaping major tectonic stress episodes. We considered one core from the depocentre and one from the eastern margin of the basin in the same stratigraphic interval (Bathonian Sup. - Callovian Inf.; restricted lagoonal setting), and analysed the macro- and micro-facies to distinguish five main depositional environments. Type and abundance of BPS were continuously recorded along the logs and treated statistically to obtain preliminary rules relying the occurrence of the BPS as a function of the contrasting facies and burial histories. The treatment of high resolution 2D images allowed the identification and separation of the BPS to evaluate total stylolitization density and insoluble thickness as an indirect measure of the dissolved volume, with respect to the morphology of the BPS considered. Based on the morphology of the BPS roughness, we used roughness signal analysis method to reconstruct the vertical paleo-stress (paleo-depth) recorded by the BPS during chemical compaction. The comparison between amount of compaction and dissolved volume as a function of the macro- and micro-facies, as well as estimates of maximum paleodepth of burial, deepen our knowledge of the factors controlling BPS development, the total thickness of carbonate dissolved and the occurrence of induced cementation in sedimentary basins.

Sedimentology and sequence stratigraphy of the Lower Jurassic Kayenta Formation, Colorado Plateau, United States

NASA Astrophysics Data System (ADS)

Sanabria, Diego Ignacio

2001-07-01

Detailed outcrop analysis of the Lower Jurassic Kayenta Formation provides the basis for the formulation of a new sequence stratigraphic model for arid to semi-arid continental deposits and the generation of a comprehensive set of sedimentologic criteria for the recognition of ephemeral stream deposits. Criteria for the recognition of ephemeral deposits in the ancient record were divided into three categories according to the scale of the feature being considered. The first category takes into account sedimentary structures commonly found in the record of ephemeral stream deposits including hyperconcentrated and debris flow deposits, planar parallel bedding, sigmoidal cross-bedding, hummocky cross-bedding, climbing ripple lamination, scour-and-fill structures, convolute bedding, overturned cross-bedding, ball-and-pillow structures, pocket structures, pillars, mud curls, flaser lamination, algal lamination, termite nests, and vertebrate tracks. The second category is concerned with the mesoscale facies architecture of ephemeral stream deposits and includes waning flow successions, bedform climb, downstream accretion, terminal wadi splays, and channel-fill successions indicating catastrophic flooding. At the large-scale facies architecture level, the third category, ephemeral stream deposits are commonly arranged in depositional units characterized by a downstream decrease in grain size and scale of sedimentary structures resulting from deposition in terminal fan systems. Outcrops of the Kayenta Formation and its transition to the Navajo Sandstone along the Vermilion and Echo Cliffs of Northern Arizona indicate that wet/dry climatic cyclicity exerted a major control on regional facies architecture. Two scales of wet/dry climatic cyclicity can be recognized in northern Arizona. Three sequence sets composed of rocks accumulated under predominantly dry or wet conditions are the expression of long-term climatic cyclicity. Short-term climatic cyclicity, on the other hand, is represented by high-frequency sequences composed of eolian or ephemeral fluvial deposits overlain by perennial fluvial sediments. Increased evapotranspiration rates, depressed water tables, and accumulation of eolian or ephemeral fluvial deposits characterize the dry portion of these cycles. The wet part of the cycles is marked by an increase in precipitation and the establishment of perennial fluvial systems and lacustrine basins. This depositional model constitutes a valuable tool for correlation of similar deposits in the subsurface.

Volcano-sedimentary characteristics in the Abu Treifiya Basin, Cairo-Suez District, Egypt: Example of dynamics and fluidization over sedimentary and volcaniclastic beds by emplacement of syn-volcanic basaltic rocks

NASA Astrophysics Data System (ADS)

Khalaf, E. A.; Abdel Motelib, A.; Hammed, M. S.; El Manawi, A. H.

2015-12-01

This paper describes the Neogene lava-sediment mingling from the Abu Treifiya Basin, Cairo-Suez district, Egypt. The lava-sediment interactions as peperites have been identified for the first time at the study area and can be used as paleoenvironmental indicators. The identification of peperite reflects contemporaneous time relationship between volcanism and sedimentation and this finding is of primary importance to address the evolutional reconstruction of the Abu Treifiya Basin. Characterization of the facies architecture and textural framework of peperites was carried out through detailed description and interpretation of their outcrops. The peperites and sedimentary rocks are up to 350 m thick and form a distinct stratigraphic framework of diverse lithology that is widespread over several kilometers at the study area. Lateral and vertical facies of the peperites vary from sediment intercalated with the extrusive/intrusive basaltic rocks forming peperitic breccias to lava-sediment contacts at a large to small scales, respectively. Peperites encompass five main facies types ascribed to: (i) carbonate sediments-hosted fluidal and blocky peperites, (ii) lava flow-hosted blocky peperites, (iii) volcaniclastics-hosted fluidal and blocky peperites, (iv) sandstone/siltstone rocks-hosted blocky peperites, and (iv) debris-flows-hosted blocky peperites. Soft sediment deformation structures, vesiculated sediments, sediments filled-vesicles, and fractures in lava flows indicate that lava flows mingled with unconsolidated wet sediments. All the peperites in this study could be described as blocky or fluidal, but mixtures of different clast shapes occur regardless of the host sediment. The presence of fluidal and blocky juvenile clasts elucidates different eruptive styles, reflecting a ductile and brittle fragmentation. The gradual variation from fluidal to blocky peperite texture, producing the vertical grading is affected by influencing factors, e.g., the viscosity, magma temperature, confining pressure, sediment fluidization, and vapor film at the magma-sediment interactions. Peperites in the study area record deposition within a shallow marine and fluvio-lacustrine environment accumulated in a rift-related basin developed during pre- to syn-rift phase, respectively. The facies transitions (peperites) in this area resulted from the explosive and sediment depositional processes, which were mingled separately by volcanism under contrast geological conditions. The development of such contrast in the depositional sequences reflects variation in the accommodation to sediment supply in the same accumulation space inside the depocenters during the rifting of the Abu Treifiya Basin. Hydrothermal mineralizations comprising quartz and carbonate are restricted to peperites and lava flows.

Off-platform Silurian sequences in the Ambler River quadrangle: A section in Geologic studies in Alaska by the U.S. Geological Survey during 1987

USGS Publications Warehouse

Dumoulin, Julie A.; Harris, Anita G.

1988-01-01

Lithofacies changes in coeval upper Paleozoic rocks have been used to unravel the tectonic history of northern Alaska (for example, Mayfield and others, 1983). Conodont biostratigraphy and detailed petrologic studies are now revealing facies differences in lower Paleozoic rocks that can also be used to constrain their tectono-sedimentary framework (Dumoulin and Harris, 1987). A basic element of basin analysis is the discrimination of shallow-water shelf and platform sequences from deeper water slope and basinal deposits. This report documents several new localities of deeper water, off-platform Silurian deposits in the Ambler River quadrangle and briefly outlines some of their paleogeographic implications.

Mid-Dinantian Waulsortian buildups in the Dublin Basin, Ireland

NASA Astrophysics Data System (ADS)

Somerville, Ian D.; Strogen, Peter; Jones, Gareth Ll.

1992-08-01

The sedimentary history and biostratigraphic setting of Waulsortian carbonate buildups of the Feltrim Limestone Formation (late Courceyan to early Chadian) within the Dublin Basin are described. There is no unique precursor or successor facies to this formation, and the massive Waulsortian banks are composed predominantly of peloidal, skeletal wackestones and lime mudstones with packstones near the tops of banks. These banks form tabular bodies of moderate relief and are interbedded with thin shales and argillaceous crinoidal limestones of inter-bank facies. In the southwest of the basin inter-bank facies are rare and the bank facies have abundant stromatactis cavities, and uniquely at Roselawn a fauna of rugose corals. All buildups in the Dublin Basin have Phase C and/or D component assemblages of Lees and Miller (1985) and are interpreted as accumulating in moderately shallow-water depths, near or within the photic zone. Isopachs for the Feltrim Limestone Formation show a NE-SW-trending axial depocentre where the Waulsortian facies is in excess of 400 m thickness. Deposition appears to have taken place on this "double-sided" ramp, in a manner similar to the model of Lees (1982) for Belgium and southern Britain. Soft-sediment deformation such as large-scale slumping, shale-injections and water-escape structures, not previously recorded from these rocks is widespread. The upper surface of the Feltrim Limestone Formation is fissured and displays a prominent erosion surface. Termination of Waulsortian facies deposition and influx of terrigenous sediment was caused by rapid uplift, attributed to Chadian tectonism. However, eustatic sea-level fall cannot be ruled out as a partial cause of the demise of the Waulsortian.

A geological and geochemical reconnaissance of the Tathlith one-degree quadrangle, sheet 19/43, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, William C.

1978-01-01

The Tathlith one-degree quadrangle occupies an area of 11,620 sq km in the northeastern Asir region of the Kingdom of Saudi Arabia, in the southeastern part of the Precambrian shield. In the eastern part of the quadrangle the Precambrian rocks are covered by exposures of easterly-dipping sandstone of Cambrian or Ordovician age. A well-developed and highly integrated drainage system trending northward is worn into the Precambrian rocks, but for most of the year the wadis are dry. The Precambrian rocks of the quadrangle consist of an old, non-metamorphosed to variably metamorphosed sequence of volcanic and sedimentary rocks intruded by three main successions of plutonic and hypabyssal igneous rocks. The interlayered volcanic and sedimentary rocks occupy arcuate, north-trending fold belts in which old, rather tight north-trending folds have been refolded at least once by open folds with nearly east-trending axes. Old, north-trending left-lateral faults are associated with the fold belts and are themselves intersected by younger, northwest-trending faults. Motion on both sets of faults has been reactivated several times. The interlayered volcanic and sedimentary rocks are an eugeosynclinal sequence of graywacke and andesite with sparse marble, quartzite, and rhyolite. Andesite is the dominant component of the sequence. Plutonic or hypabyssal equivalents of the andesite intrude the volcanic-sedimentary sequence. In many places these rocks are essentially non-metamorphosed, but elsewhere they are faintly to strongly metamorphosed, or even polymetamorphosed. Dynamothermal metamorphism associated with the northerly folding, and contact metamorphism are the principal kinds of metamorphism. The metamorphic grade is mostly greenschist facies or albite-epidote amphibolite facies. The largest intrusive in the area is a batholith of regional dimension, the east side of which intrudes and divides the fold belts. Granite gneiss and granodiorite gneiss are the main components of the batholith. Biotite granite of calc-alkaline composition, and somewhat younger than the granite gneiss and granodiorite gneiss, forms northerly elongate to subcircular plutons in the gneisses and the rocks of the volcanic-sedimentary sequence.

Geologic and Geochronologic Studies of the Early Proterozoic Kanektok Metamorphic Complex of Southwestern Alaska

USGS Publications Warehouse

Turner, Donald L.; Forbes, Robert B.; Aleinikoff, John N.; McDougall, Ian; Hedge, Carl E.; Wilson, Frederic H.; Layer, Paul W.; Hults, Chad P.

2009-01-01

The Kanektok complex of southwestern Alaska appears to be a rootless terrane of early Proterozoic sedimentary, volcanic, and intrusive rocks which were metamorphosed to amphibolite and granulite facies and later underwent a pervasive late Mesozoic thermal event accompanied by granitic plutonism and greenschist facies metamorphism of overlying sediments. The terrane is structurally complex and exhibits characteristics generally attributed to mantled gneiss domes. U-Th-Pb analyses of zircon and sphene from a core zone granitic orthogneiss indicate that the orthogneiss protolith crystallized about 2.05 b.y. ago and that the protolithic sedimentary, volcanic and granitic intrusive rocks of the core zone were metamorphosed to granulite and amphibolite facies about 1.77 b.y. ago. A Rb-Sr study of 13 whole-rock samples also suggests metamorphism of an early Proterozoic [Paleoproterozoic] protolith at 1.77 Ga, although the data are scattered and difficult to interpret. Seventy-seven conventional 40K/40Ar mineral ages were determined for 58 rocks distributed throughout the outcrop area of the complex. Analysis of the K-Ar data indicate that nearly all of these ages have been totally or partially reset by a pervasive late Mesozoic thermal event accompanied by granitic plutonism and greenschist facies metamorphism. Several biotites gave apparent K-Ar ages over 2 Ga. These ages appear to be controlled by excess radiogenic 40Ar produced by the degassing protolith during the 1.77 Ga metamorphism and incorporated by the biotites when they were at temperatures at which Ar could diffuse through the lattice. Five amphibolites yielded apparent Precambrian 40K/40Ar hornblende ages. There is no evidence that these hornblende ages have been increased by excess argon. The oldest 40K/40Ar hornblende age of 1.77 Ga is identical to the sphene 207Pb/206Pb orthogneiss age and to the Rb-Sr 'isochron' age for six of the 13 whole-rock samples. The younger hornblende ages are interpreted as having been partially reset during the late Mesozoic thermal event. 40Ar/39Ar incremental heating experiments suggest metamorphism occurred at least 1.2 b.y. ago but do not exhibit high temperature plateau ages significantly older than the 40Ar/39Ar total fusion ages of these samples. The age spectra are much more uniform than expected from a terrane with such a complex thermal history, perhaps caused by the small grain size of the samples which may possibly be less than the effective Ar diffusion radii of the analyzed hornblendes.

Completed Ensemble Empirical Mode Decomposition: a Robust Signal Processing Tool to Identify Sequence Strata

NASA Astrophysics Data System (ADS)

Purba, H.; Musu, J. T.; Diria, S. A.; Permono, W.; Sadjati, O.; Sopandi, I.; Ruzi, F.

2018-03-01

Well logging data provide many geological information and its trends resemble nonlinear or non-stationary signals. As long well log data recorded, there will be external factors can interfere or influence its signal resolution. A sensitive signal analysis is required to improve the accuracy of logging interpretation which it becomes an important thing to determine sequence stratigraphy. Complete Ensemble Empirical Mode Decomposition (CEEMD) is one of nonlinear and non-stationary signal analysis method which decomposes complex signal into a series of intrinsic mode function (IMF). Gamma Ray and Spontaneous Potential well log parameters decomposed into IMF-1 up to IMF-10 and each of its combination and correlation makes physical meaning identification. It identifies the stratigraphy and cycle sequence and provides an effective signal treatment method for sequence interface. This method was applied to BRK- 30 and BRK-13 well logging data. The result shows that the combination of IMF-5, IMF-6, and IMF-7 pattern represent short-term and middle-term while IMF-9 and IMF-10 represent the long-term sedimentation which describe distal front and delta front facies, and inter-distributary mouth bar facies, respectively. Thus, CEEMD clearly can determine the different sedimentary layer interface and better identification of the cycle of stratigraphic base level.

Stratigraphy and tectonic history of the Tucson Basin, Pima County, Arizona, based on the Exxon state (32)-1 well

USGS Publications Warehouse

Houser, Brenda B.; Peters, Lisa; Esser, Richard P.; Gettings, Mark E.

2004-01-01

The Tucson Basin is a relatively large late Cenozoic extensional basin developed in the upper plate of the Catalina detachment fault in the southern Basin and Range Province, southeastern Arizona. In 1972, Exxon Company, U.S.A., drilled an exploration well (Exxon State (32)-1) near the center of the Tucson Basin that penetrated 3,658 m (12,001 ft) of sedimentary and volcanic rocks above granitoid basement. Detailed study of cuttings and geophysical logs of the Exxon State well has led to revision of the previously reported subsurface stratigraphy for the basin and provided new insight into its depositional and tectonic history. There is evidence that detachment faulting and uplift of the adjacent Catalina core complex on the north have affected the subsurface geometry of the basin. The gravity anomaly map of the Tucson Basin indicates that the locations of subbasins along the north-trending axis of the main basin coincide with the intersection of this axis with west-southwest projections of synforms in the adjacent core complex. In other words, the subbasins overlie synforms and the ridges between subbasins overlie antiforms. The Exxon State well was drilled near the center of one of the subbasins. The Exxon well was drilled to a total depth of 3,827 m (12,556 ft), and penetrated the following stratigraphic section: Pleistocene(?) to middle(?) Miocene upper basin-fill sedimentary rocks (0-908 m [0-2,980 ft]) lower basin-fill sedimentary rocks (908-1,880 m [2,980-6,170 ft]) lower Miocene and upper Oligocene Pantano Formation (1,880-2,516 m [6,170-8,256 ft]) upper Oligocene to Paleocene(?) volcanic and sedimentary rocks (2,516-3,056 m [8,256-10,026 ft]) Lower Cretaceous to Upper Jurassic Bisbee Group (3,056-3,658 m [10,026-12,001 ft]) pre-Late Jurassic granitoid plutonic rock (3,658-3,827 m [12,001- 12,556 ft]). Stratigraphy and Tectonic History of the Tucson Basin, Pima County, Arizona, Based on the Exxon State (32)-1 Well The 1,880 m (6,170 ft) of basin-fill sedimentary rocks consist of alluvial-fan, alluvial-plain, and playa facies. The uppermost unit, a 341-m-thick (1,120-ft) lower Pleistocene and upper Pliocene alluvial-fan deposit (named the Cienega Creek fan in this study), is an important aquifer in the Tucson basin. The facies change at the base of the alluvial fan may prove to be recognizable in well data throughout much of the basin. The well data show that a sharp boundary at 908 m (2,980 ft) separates relatively unconsolidated and undeformed upper basin fill from denser, significantly faulted lower basin fill, indicating that there were two stages of basin filling in the Tucson basin as in other basins of the region. The two stages apparently occurred during times of differing tectonic style in the region. In the Tucson area the Pantano Formation, which contains an andesite flow dated at about 25 Ma, fills a syntectonic basin in the hanging wall of the Catalina detachment fault, reflecting middle Tertiary extension on the fault. The formation in the well is 636 m thick (2,086 ft) and consists of alluvial-fan, playa, and lacustrine sedimentary facies, a lava flow, and rock- avalanche deposits. Analysis of the geophysical logs indicates that a K-Ar date of 23.4 Ma reported previously for the Pantano interval of the well was obtained on selected cuttings collected from a rock-avalanche deposit near the base of the unit and, thus, does not date the Pantano Formation. The middle Tertiary volcanic and sedimentary rocks have an aggregate thickness of 540 m (1,770 ft). We obtained a new 40Ar/ 39Ar age of 26.91+0.18 Ma on biotite sampled at a depth of 2,584-2,609 m (8,478-8,560 ft) from a 169-m-thick (554-ft) silicic tuff in this interval. The volcanic rocks probably correlate with other middle Tertiary volcanic rocks of the area, and the sedimentary rocks may correlate with the Cloudburst and Mineta Formations exposed on the flanks of the San Pedro Basin to the northeast. The Bisbee Group in the Exxon well is 602 m (1,975 f

New Constraints from the Seychelles on the Timing and Magnitude of Peak Global Mean Sea Level during the Last Interglacial

NASA Astrophysics Data System (ADS)

Vyverberg, K.; Dechnik, B.; Dutton, A.; Webster, J.; Zwartz, D.; Edwards, R. L.

2016-12-01

Projecting the rate of future sea-level rise remains a primary challenge associated with continued climate change. However, uncertainties remain in our understanding of the rate of polar ice sheet retreat in warmer-than-present climates. To address this issue, we present a new sea level reconstruction from the tectonically stable granitic Seychelles based on Last Interglacial coral ages and elevations within their sedimentary and stratigraphic context, including estimates of paleo-water depth based on newly defined coralgal assemblages. The reef facies analyzed here has a narrow and shallow paleowater depth range (<2 m) providing increased control on the absolute position of sea level during this time period. Corrected for local glacial isostatic adjustment effects including the fingerprint associated with polar ice sheet mass loss, corals found in primary growth position within in situ coralgal reef framework confirm that global mean sea level (GMSL) was nearly 6 m above present early in the interglacial period. Each coral was dated in triplicate and screened for anomalous U-series geochemistry parameters. The combination of age-elevation data with the sedimentary micro and macro facies and stratigraphic analysis reveals a sea-level rise over 5-6 thousand years that is punctuated by repeated episodes of reef disturbance. These episodes are marked stratigraphically by coral rubble layers or extensive lateral encrustations of Millepora sp. that are infested with coral-dwelling barnacles. These disturbance layers may have been generated through internal reef processes and/or external agents, including coral disease, bleaching, predation, hurricanes, or sub-aerial exposure. In total, these new observations provide improved constraints on the timing, magnitude, and rates of sea-level rise during the Last Interglacial.

Multiple sulfur isotope records at the end-Guadalupian (Permian) at Chaotian, China: Implications for a role of bioturbation in the Phanerozoic sulfur cycle

NASA Astrophysics Data System (ADS)

Saitoh, Masafumi; Ueno, Yuichiro; Matsu'ura, Fumihiro; Kawamura, Tetsuya; Isozaki, Yukio; Yao, Jianxin; Ji, Zhansheng; Yoshida, Naohiro

2017-03-01

A recent study on quadruple sulfur isotopes (32S, 33S, 34S, and 36S) of sedimentary pyrite suggested that the end-Guadalupian extinction was caused by shoaling of the sulfidic deep-water. This scenario is based on the assumption that sulfur isotopic compositions of pyrite from hosting sediments were controlled by benthos activities, thus by the redox conditions of the sedimentary environments. Nonetheless, the relationship between the sulfur isotope records and redox conditions, reconstructed from litho- and bio-facies, are poorly known. In order to examine the effect of bioturbation in sediments, quadruple sulfur isotopic compositions of sedimentary pyrite from the end-Guadalupian succession in Chaotian, South China, were analyzed. Black mudstones of deep-water facies immediately below the extinction horizon have consistently high Δ33S values of ca. +0.079‰, clearly suggesting a sulfate reduction in the anoxic water column. Our new data are consistent with the emergence of a sulfidic deep-water mass prior to the end-Guadalupian extinction; the upwelling of the toxic deep-water may have contributed to the extinction. In contrast, shallow-marine bioclastic limestones with burrows deposited under oxic conditions have negative Δ33S values. This anomalous isotopic signal indicates the mixing of two distinct types of pyrite; one generated during the sulfate reduction in an open system and the other in a closed system. We interpret that bioturbation supplied sulfate in the sediments and promoted sulfate reduction and in-situ sulfide precipitation within the sediments. The negative Δ33S values of oxic sediments in Chaotian are inconsistent with the previous model and demonstrate that the sedimentary sulfur cycle associated with bioturbation was more complicated than previously thought. Our study also implies that, more generally, the role of bioturbation in increasing seawater sulfate concentration in the Phanerozoic may have been overestimated in the previous studies, because bioturbation may have enhanced sulfide burial or sulfur output from the oceans.

Holocene facies analysis of the sedimentary record with anthropogenic impacts in the Ria de Vigo (NW Spain)

NASA Astrophysics Data System (ADS)

Rubio, B.; Garcia-Gil, S.; Vilas, F.; Garcia, A.

2004-05-01

The Ria de Vigo constitutes the southernmost ria of the Rias Bajas. The reconnaisance studies of this ria indicate a heterogeneous distribution of both terrigenous and carbonate sediments with a major axial deposit of cohesive sediments. These fine sediments are relatively rich in organic matter, particularly in the inner part of the ria. This is the result of a progressive change in hydrodynamic conditions along the ria. The outer parts are affected by severe storms in winter and by upwelling processes in summer, whilst the inner parts have an estuarine character throughout the year. The upwelling produces a marked increase in the biological productivity in the Ria and, consequently, these sediments have typically very high contents of organic matter. In recent years, increasing interest has been shown in the levels of heavy metals in sediments of the Galician Rias. Particularly, some of these studies showed a higher concentration of heavy metals in the muddiest surficial sediments in the Ria de Vigo. However, and despite of the important human and industrial settlement in the Galician rias, knowledge about the evolution of historical contamination along the Holocene sedimentary record is scarce. In order to ascertain this evolution have been selected 8 gravity corer located along the axial part of the ria. This evaluation was focused on the muddy sediments of the axial part of the ria due to the dependence of metal levels on grain size, resulting from the association of metals with the finer particles, as it has been demonstrated by previous studies in the ria. On these sediments, the combination of geochemical, mineralogical and sedimentological data, facies interpretations (obtained from x-ray radiography), and their integration with high resolution seismic data (Uniboom and 3.5 Khz subbottom profiler) have allowed to establish the evolution of certain heavy metals (Zn, Cu and Pb) along the Holocene recent sedimentary record in the Ria de Vigo. Sediments in the outer ria are comprised by muddy sands showing a very slight enrichment in certain heavy metals in the upper sediments. Contrary to facies in the outer ria sediments, facies in the inner ria comprises finer organic-rich sediments. These are related to the presence of biodeposits produced by mussel rafts and to a higher anthropogenic influence due to industrial activity. Both influences are notably reflected in the Cu, Zn and Pb vertical profiles, increasing markedly the levels of these metals in the uppermost 0.15 m of sediments. Diagenetic recycling may contribute to the enhancement of trace metal concentrations in the upper sediments of inner cores and also this is related to a higher content of organic carbon in these sediments. Results obtained in this ria constitutes a good reference to study other rias and coastal areas of the Iberian Atlantic margin. This work was funded by projects REN2003-02822 MAR, REN2003-03233 MAR, VEM2003-20093-C03-03 of the Spanish MCYT and PGDIT03RMA30101PR of the Galician Government (XUGA). Contribution No 302 XM2 group.

The pore structure and fractal characteristics of shales with low thermal maturity from the Yuqia Coalfield, northern Qaidam Basin, northwestern China

NASA Astrophysics Data System (ADS)

Hou, Haihai; Shao, Longyi; Li, Yonghong; Li, Zhen; Zhang, Wenlong; Wen, Huaijun

2018-03-01

The continental shales from the Middle Jurassic Shimengou Formation of the northern Qaidam Basin, northwestern China, have been investigated in recent years because of their shale gas potential. In this study, a total of twenty-two shale samples were collected from the YQ-1 borehole in the Yuqia Coalfield, northern Qaidam Basin. The total organic carbon (TOC) contents, pore structure parameters, and fractal characteristics of the samples were investigated using TOC analysis, low-temperature nitrogen adsorption experiments, and fractal analysis. The results show that the average pore size of the Shimengou shales varied from 8.149 nm to 20.635 nm with a mean value of 10.74 nm, which is considered mesopore-sized. The pores of the shales are mainly inkbottle- and slit-shaped. The sedimentary environment plays an essential role in controlling the TOC contents of the low maturity shales, with the TOC values of shales from deep to semi-deep lake facies (mean: 5.23%) being notably higher than those of the shore-shallow lake facies (mean: 0.65%). The fractal dimensions range from 2.4639 to 2.6857 with a mean of 2.6122, higher than those of marine shales, which indicates that the pore surface was rougher and the pore structure more complex in these continental shales. The fractal dimensions increase with increasing total pore volume and total specific surface area, and with decreasing average pore size. With increasing TOC contents in shales, the fractal dimensions increase first and then decrease, with the highest value occurring at 2% of TOC content, which is in accordance with the trends between the TOC and both total specific surface area and total pore volume. The pore structure complexity and pore surface roughness of these low-maturity shales would be controlled by the combined effects of both sedimentary environments and the TOC contents.

Contrasting Holocene sedimentary geologies of lower Daly River, northern Australia, and lower Sepik-Ramu, Papua New Guinea

NASA Astrophysics Data System (ADS)

Chappell, John

1993-03-01

The estuarine plain of the macrotidal Daly River, in monsoonal northern Australia, is underlain by extensive mid-Holocene mangrove swamp sediments which accumulated during the last stages of Post-glacial sea-level rise. Sediment yield from the catchment is too low to account for the volume which accumulated during sea-level rise, and onshore transport is invoked. This is supported by radiocarbon ages and facies analysis of the transgressive sediment tract beneath the maximum flooding surface (MFS), and of the tract of vertical sedimentation which extends from the MFS to the surface of estuarine/fluvial transition (the EFT). The EFT occurred about 5000 to 6000 BP throughout the estuarine plain. A contrasting situation exists in the lowland Holocene basin of the microtidal Sepik and Ramu rivers in Papua New Guinea, which derive sediment from highly tectonic catchments. A tectonic basin, which was a shallow brackish inland sea after Post-glacial transgression, is separated by a low divide from a deltaic plain. Progradation of the deltaic plain commenced about 3500 BP after regressive sedimentation eclipsed the inland sea in the tectonic basin. Contrasting organic facies, mangrove in the Daly and freshwater swamp deposits in the Sepik-Ramu, highlight differences between facies models of the two systems. Differences between fluvio-tidal regimes are reflected by the EFT, which is synchronous in the Daly and diachronous in the Sepik-Ramu, and possibly by the MFS which is diachronous in the Daly and may be synchronous in the Sepik-Ramu.

Stratigraphy, sedimentology, and ichnology of the Late Pennsylvanian Glenshaw Formation (Lower Conemaugh Group), southern Dunkard basin, Ohio-Kentucky-West Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martino, R.L.

Facies analysis of outcrops of the Glenshaw Formation was carried out at 45 localities over a 761 sq. km area. The glenshaw Formation is 61--76 m thick in the study area. Four marine units (Lower Brush Creek, Upper Brush Creek, Cambridge , and Ames) occur which contain invertebrate body fossils and/or trace fossils including Teichichnus, Rhizocorallium, Aulichnites, Paleophycus, Lockeia, and Curvolithus. Alluvial channel-fills contain internal features that reflect deposition in high sinuosity suspended or mixed load rivers. Paleocurrent data (N = 77) are broadly dispersed with a mean azimuth of 335 degrees. Overbank facies have yielded trackways from giant arthropodsmore » and Eryopoid amphibians (Limnopus). There are fewer marine units in the glenshaw than toward the north and west which has made direct detailed correlation of much of the formation problematic. The coal beds and marine units used previous stratigraphic studies may be extended through the recognition of non-coal-bearing paleosols and marine-influenced intervals distinguished by facies relations, and sedimentary and biogenic structures. Nine laterally persistent, paleosol-bounded packages occur which are comparable to allocyclic T-R units reported by Busch and Rollins (1984) from Pennsylvania and Ohio. Alternating episodes of soil formation and alluvial aggradation may reflect updip coastal plain responses to low stand incision of drainage lines and sediment bypassing followed by aggradation of alluvial systems in response to rising sea level. Climate changes may also have played a role in sediment flux.« less

Glacimarine Sedimentary Processes and Facies on the Polar North Atlantic Margins

NASA Astrophysics Data System (ADS)

Dowdeswell, J. A.; Elverhfi, A.; Spielhagen, R.

Major contrasts in the glaciological, oceanic and atmospheric parameters affecting the Polar North Atlantic, both over space between its eastern and western margins, and through time from full glacial to interglacial conditions, have lead to the deposition of a wide variety of sedimentary facies in these ice-influenced seas. The dynamics of the glaciers and ice sheets on the hinterlands surrounding the Polar North Atlantic have exterted a major influence on the processes, rates and patterns of sedimentation on the continental margins of the Norwegian and Greenland seas over the Late Cenozoic. The western margin is influenced by the cold East Greenland Current and the Svalbard margin by the northernmost extent of the warm North Atlantic Drift and the passage of relatively warm cyclonic air masses. In the fjords of Spitsbergen and the northwestern Barents Sea, glacial meltwater is dominant in delivering sediments. In the fjords of East Greenland the large numbers of icebergs produced from fast-flowing outlets of the Greenland Ice Sheet play a more significant role in sedimentation. During full glacials, sediments are delivered to the shelf break from fast-flowing ice streams, which drain huge basins within the parent ice sheet. Large prograding fans located on the continental slope offshore of these ice streams are made up of stacked debris flows. Large-scale mass failures, turbidity currents, and gas-escape structures also rework debris in continental slope and shelf settings. Even during interglacials, both the margins and the deep ocean basins beyond them retain a glacimarine overprint derived from debris in far-travelled icebergs and sea ice. Under full glacial conditions, the glacier influence is correspondingly stronger, and this is reflected in the glacial and glacimarine facies deposited at these times.

Upper Carboniferous retroarc volcanism with submarine and subaerial facies at the western Gondwana margin of Argentina

NASA Astrophysics Data System (ADS)

Koukharsky, M.; Kleiman, L.; Etcheverría, M.; Quenardelle, S.; Bercowski, F.

2009-04-01

During Late Carboniferous times a continental magmatic arc developed at the western margin of Gondwana in South America, as several marine sedimentary basins were formed at the same time in the retroarc region. North of 33°S, at Cordón Agua del Jagüel, Precordillera of Mendoza, Argentina, a volcanic sequence crops out which was emplaced in a submarine environment with some subaerial exposures, and it is intercalated in marine sediments of Agua del Jagüel Formation, which fills of one of these retroarc basins. This paper presents, for the first time, a facies analyses together with geochemical and isotopic data of this volcanic suite, suggesting its deposition in an ensialic retroarc marine basin. The volcanic succession comprises debris flows with either sedimentary or volcanic fragments, base surge, resedimented massive and laminated dacitic-andesitic hyaloclastite, pillow lava, basic hyaloclastite and dacitic-andesitic lavas and hyaloclastite facies. Its composition is bimodal, either basaltic or dacitic-andesitic. The geochemistry data indicate a subalkaline, low K calk-alkaline and metaluminous affinity. The geochemistry of the basalts points to an origin of the magmas from a depleted mantle source with some crustal contamination. Conversely, the geochemistry of the dacites-andesites shows an important participation of both crustal components and subduction related fluids. A different magmatic source for the basalts than for the dacites-andesites is also supported by Sr and Nd isotopic initial ratios and Nd model ages. The characteristics of this magmatic suite suggest its emplacement in an extensional setting probably associated with the presence of a steepened subduction zone at this latitude during Upper Carboniferous times.

Le Silurien de la région d'Oulad Abbou (Meseta occidentale, Maroc) : une sédimentation péritidale sous contrôle tectonique

NASA Astrophysics Data System (ADS)

Attou, Ahmed; Hamoumi, Naima

2004-07-01

In the Oulad Abbou syncline, western coastal Meseta, the Silurian deposits exhibit siliciclastic or mixed siliciclastic/carbonate tidal facies that recorded alkaline basalt flows and syn-sedimentary deformations. These facies are staked into peritidal shallowing upward sequences reflecting the evolution from an infratidal to a supratidal environment. These sequences recorded low-amplitude and high-frequency sea-level variations. The built-up of these rhythmic sequences is related to distensive tectonic that allowed the development of isolated platform from extensive siliciclastic influx. This tectonic event is well recorded in the palaeogeographic evolution of the northern Gondwana platform during the Lower Palaeozoic time. To cite this article: A. Attou, N. Hamoumi, C. R. Geoscience 336 (2004).

Low energy, low latitude wave-dominated shallow marine depositional systems: examples from northern Borneo

NASA Astrophysics Data System (ADS)

Lambiase, Joseph J.; Suraya Tulot

2013-12-01

The depositional environments of the wave-dominant successions in the middle to late Miocene Belait and Sandakan Formations in northwestern and northern Borneo, respectively, were determined based on grain size distributions, sedimentary structures and facies successions, as well as trace and microfossil assemblages. Generally, progradational shoreface successions in the Belait Formation were deposited in very low wave energy environments where longshore currents were too weak to generate trough cross-bedding. Shoreface sands are laterally continuous for several km and follow the basin contours, suggesting attached beaches similar to the modern Brunei coastline. In contrast, trough cross-bedding is common in the coarser Sandakan Formation and back-barrier mangrove swamp deposits cap the progradational succession as on the modern northern Dent Peninsula coastline, indicating barrier development and higher wave energy conditions than in the Belait Formation. The Borneo examples indicate that barrier systems that include significant tidal facies form under higher wave energy conditions than attached beaches with virtually no tidal facies. Also, Borneo's low latitude climate promotes back-barrier mangrove which reduces tidal exchange and reduces tidal influence relative to comparable temperate climate systems. The results of the study indicate that depositional systems on low energy, wave-dominated coasts are highly variable, as are the sand bodies and facies associations they generate.

Sedimentary facies of the upper Cambrian (Furongian; Jiangshanian and Sunwaptan) Tunnel City Group, Upper Mississippi Valley: new insight on the old stormy debate

USGS Publications Warehouse

Eoff, Jennifer D.

2014-01-01

New data from detailed measured sections permit a comprehensive revision of the sedimentary facies of the Furongian (upper Cambrian; Jiangshanian and Sunwaptan stages) Tunnel City Group (Lone Rock Formation and Mazomanie Formation) of Wisconsin and Minnesota. Heterogeneous sandstones, comprising seven lithofacies along a depositional transect from shoreface to transitional-offshore environments, record sedimentation in a storm-dominated, shallow-marine epicontinental sea. The origin of glauconite in the Birkmose Member and Reno Member of the Lone Rock Formation was unclear, but its formation and preserved distribution are linked to inferred depositional energy rather than just net sedimentation rate. Flat-pebble conglomerate, abundant in lower Paleozoic strata, was associated with the formation of a condensed section during cratonic flooding. Hummocky cross-stratification was a valuable tool used to infer depositional settings and relative paleobathymetry, and the model describing formation of this bedform is expanded to address flow types dominant during its genesis, in particular the importance of an early unidirectional component of combined flow. The depositional model developed here for the Lone Rock Formation and Mazomanie Formation is broadly applicable to other strata common to the early Paleozoic that document sedimentation along flooded cratonic interiors or shallow shelves.

Lithofacies and sequence stratigraphic analysis of the Upper Jurassic siliciclastics in the eastern Kopet-Dagh Basin, NE Iran

NASA Astrophysics Data System (ADS)

Zand-Moghadam, Hamed; Moussavi-Harami, Reza; Mahboubi, Asadollah; Aghaei, Ali

2016-05-01

The Upper Jurassic (Oxfordian-Kimmeridgian) Mozduran Formation is the most important gas reservoirs of the northeast Iran. Siliciclastic facies of this formation in eastern most parts of the basin have not been studied yet. Therefore, four stratigraphic sections of Mozduran Formation have been selected in the Kole-Malekabad, Kale-Karab, Deraz-Ab and Karizak to interpret depositional history and analyze depositional sequences. Based on texture and sedimentary structures, 14 slilciclastic lithofacies were identified and classified into four categories, including conglomerate (Gms, Gp, Gt), sandstone (Sh, Sp, St, Sr, Sl, Sm, Se), mud rock (Fl) and intermediate sandstone-mud rock (Sr (Fl), Sr/Fl, Fl (Sr)). Identified lithofacies formed four architectural elements CH, SB, LA and FF. Lithofacies characteristics and architectural elements with mostly bimodal pattern of paleocurrents show that the majority of Mozduran lithofacies deposited in the coastal environment (tidal influence). Sequence stratigraphic analysis shows that the Kole-Malekabad section consists of two depositional sequences while other sections are characterized by three depositional sequences. The lower and upper sequence boundaries of the Mozduran Formation in all stratigraphic sections are SB1 that are distinguished by paleosol and sometime conglomerate horizons. Most of depositional sequences in studied sections are composed only of TST and HST. The TST deposits consist mostly of quartzarenite and litharenite petrofacies that have been deposited in the tidal zone. HST packages are mostly including mud rocks with interdeds of sandstone lithofacies that are deposited in supratidal setting. The LST facies is recognized only in the DS3 (equivalent to the second depositional sequences of the Kole-Malekabad), which consist of conglomerate facies. Instead, the Kole-Malekabad section is often composed of supratidal gypsiferrous shales, indicating sea level fall in the study area.

Unraveling the polymetamorphic history of garnet-bearing metabasites: Insights from the North Motagua Mélange (Guatemala Suture Zone)

NASA Astrophysics Data System (ADS)

Bonnet, G.; Flores, K. E.; Martin, C.; Harlow, G. E.

2014-12-01

The Guatemala Suture Zone is the fault-bound region in central Guatemala that contains the present North American-Caribbean plate boundary. This major composite geotectonic unit contains a variety of ophiolites, serpentinite mélanges, and metavolcano-sedimentary sequences along with high-grade schists, gneisses, low-grade metasediments and metagranites thrusted north and south of the active Motagua fault system (MFS). The North Motagua Mélange (NMM) outcrops north of the MFS and testifies the emplacement of exhumed subduction assemblages along a collisional tectonic setting. The NMM is composed of a serpentinite-matrix mélange that contains blocks of metabasites (subgreenschist facies metabasalt, grt-blueschist, eclogite, grt-amphibolite), vein-related rocks (jadeitite, omphacitite, albitite, mica-rock), and metatrondhjemites. Our new detailed petrographic and thermobarometric study on the garnet-bearing metabasites reveals a complex polymetamorphic history with multiple tectonic events. Eclogites show a classical clockwise PT path composed of (a) prograde blueschist/eclogite facies within garnet cores, (b) eclogite facies metamorphic peak at ~1.7 GPa and 620°C, (c) post-peak blueschist facies, (d) amphibolite facies overprint, and (e) late stage greenschist facies. Two types of garnet amphibolite blocks can be found, the first consist of (a) a relict eclogite facies peak at ~1.3 GPa and 550°C only preserved within anhedral garnet cores, and (b) surrounded by a post-peak amphibolite facies. In contrast, the second type displays a prograde amphibolite facies at 0.6-1.1 GPa and 400-650°C. The eclogites metamorphic peak suggests formation in a normal subduction zone at ~60 km depth, a subsequent exhumation to the middle section of the subduction channel (~35 km), and a later metamorphic reworking at lower P and higher T before its final exhumation. The first type of garnet amphibolite shows a similar trajectory as the eclogites but at warmer conditions. In contrast, the second type of garnet amphibolite recorded a single prograde evolution along a hotter thermal gradient. These different PT paths suggest multiple metamorphic events that may be related to subduction initiation, partial exhumation and storage of HP-LT rocks, subduction of buoyant crust, final exhumation and obduction.

Deposits related to supercritical flows in glacifluvial deltas and subaqueous ice-contact fans: Integrating facies analysis and ground-penetrating radar

NASA Astrophysics Data System (ADS)

Lang, Joerg; Sievers, Julian; Loewer, Markus; Igel, Jan; Winsemann, Jutta

2017-04-01

Bedforms related to supercritical flows have recently received much interest and the understanding of flow morphodynamics and depositional processes has been greatly advanced. However, outcrop studies of these bedforms are commonly hampered by their long wavelengths. Therefore, we combined outcrop-based facies analysis with extensive ground-penetrating radar (GPR) measurements. Different GPR antennas (200, 400 and 1500 MHz) were utilised to measure both long profiles and densely spaced grids in order to map the large-scale facies architecture and image the three-dimensional geometry of the deposits. The studied delta and subaqueous ice-contact fan successions were deposited within ice-dammed lakes, which formed along the margins of the Middle Pleistocene Scandinavian ice sheets across Northern Germany. These glacilacustrine depositional systems are characterised by high aggradation rates due to the rapid expansion and deceleration of high-energy sediment-laden flows, favouring the preservation of bedforms related to supercritical flows. In flow direction, delta foresets commonly display lenticular scours, which are 2 to 6 m wide and 0.15 to 0.5 m deep. Characteristically, scours are filled by upslope dipping backsets, consisting of pebbly sand. In a few cases, massive and deformed strata were observed, passing upflow into backsets. Across flow, scours are 2 to 3 m wide and typically display a concentric infill. The scour fills are commonly associated with subhorizontally or sinusoidal stratified pebbly sand. These facies types are interpreted as deposits of cyclic steps and antidunes, respectively, representing deposition from supercritical density flows, which formed during high meltwater discharge events or regressive slope failures (Winsemann et al., in review). The GPR-sections show that the scour fills form trains along the delta foresets, which can be traced for up to 15 m. The studied subaqueous ice-contact fan succession relates to the zone of flow transition of a supercritical plane-wall efflux-jet and is characterised by deposits of chutes-and-pools, antidunes and humpback dunes (Lang & Winsemann, 2013). In the GPR-sections, long wavelength (2 to 40 m) sinusoidal reflectors with lateral extents of up to 175 m represent the dominant radar facies, which is interpreted as deposits of stationary aggrading antidunes. This radar facies is associated with lenses (2 to 15 m wide, 0.5 to 1.5 m thick) filled with planar upflow-dipping reflectors, and sheet-like sigmoidal downflow-dipping reflectors, which are interpreted as deposits of chutes-and-pools and humpback dunes, respectively. Facies transitions occur from cyclic steps or chutes-and-pools to antidunes and from antidunes to humpback dunes, and are interpreted as related to the evolution of bedforms under spatially and temporarily changing flow conditions. References: Lang, J. & Winsemann, J. (2013) Lateral and vertical facies relationships of bedforms deposited by aggrading supercritical flows: from cyclic steps to humpback dunes. Sedimentary Geology 296, 36-54. Winsemann, J., Lang, J., Loewer, M., Polom, U., Pollok, L., Igel, J. & Brandes, C. (in review) Forced regressive ice-marginal deltas in glacial lake basins: geomorphology, facies variability and large-scale depositional architecture.

L'Anti-Atlas occidental du Maroc: étude sédimentologique et reconstitutions paléogéographiques au Cambrien inférieur

NASA Astrophysics Data System (ADS)

Benssaou, M.; Hamoumi, N.

2001-04-01

L'étude lithostratigraphique en sédimentologique des formations du Cambrien inférieur de l'Anti-Atlas occidental (Maroc) a permis de mettre en évidence la diversité extrême des faciès allant des faciès continentaux jusqu'au faciès franchement marins. La répartition verticale de ces faciès ainsi que leurs associations ont permis de (i) proposer un nouveau découpage de la succession en formations lithostratigraphiques, (ii) reconstituer les milieux de dépôt (système fluviatile, lacs, fan-deltas, milieu littoral, plate-forme dominée par des constructions stromatolitiques et récifales et plate-forme dominée par les tempêtes) et (iii) établir des modèles paléogéographiques retraçant les différentes étapes d'évolution de ce bassin qui fait partie de la plate-forme nord-gondwanienne au Cambrien inférieur. Lithostratigraphical and sedimentological studies of the Early Cambrian formations in the western Anti-Atlas (Morocco) evidence their large diversity of facies ranging from continental to clearly marine. Vertical distribution and associations of facies afford opportunities to (i) suggest a new classification of the sedimentary sequence in terms of lithostratigraphic formations, (ii) restore the depositional environments (fluvial system, lake, delta fan, coast, stromatolite and reef-dominated platform, tempest-dominated platform), and (iii) establish palæogeographic models displaying the different evolutionary stages of this basin that constituted a part of the Lower Cambrian north-Gondwanian platform.

An Archaean submarine volcanic debris avalanche deposit, Yilgarn Craton, western Australia, with komatiite, basalt and dacite megablocks. The product of dome collapse

NASA Astrophysics Data System (ADS)

Trofimovs, J.; Cas, R. A. F.; Davis, B. K.

2004-11-01

The Boorara Domain of the Kalgoorlie Terrane, Eastern Goldfields Superterrane, western Australia contains excellent exposure of Archaean felsic and ultramafic breccias characterised by facies associations interpreted to reflect a volcanic debris avalanche mode of deposition. Such Archaean volcanic deposits are typically difficult to identify due to poor preservation and exposure. However, primary volcanological and sedimentological features are preserved within the relatively low strain and low metamorphic grade (up to lower greenschist facies) Boorara Domain that allow accurate facies reconstruction. The breccia deposit is characterised by two clast populations. A 'block facies' comprised of metre- to decimetre-scale megablocks of dacite, basalt and komatiite is preserved within a 'mixed' matrix breccia facies of angular, coarse sand- to boulder-sized clasts. The megablocks preserve original stratigraphy and show fracturing and jigsaw-fit textures within the poorly sorted, unstratified, genetically related matrix. Overlying the volcanic debris avalanche deposit, are a series of stratified horizons. These deposits show evidence of hydraulic sorting within bedforms exhibiting normal grain-size grading and tractional scour and fill structures along their basal contacts. The stratified facies is interpreted to have been deposited by high concentration, high competency turbidity currents, triggered by slope stabilization slides in the source region. Primary contacts and volcanic textures preserved in decimetre-scale volcanic blocks allow reconstruction of the pre-collapse palaeovolcanological history of the source region. The volcanic debris avalanche deposit, together with the associated stratified sedimentary horizons, were produced by sector collapse of a submarine, dacitic volcanic dome. Contemporaneous komatiite intrusion into the dacite dome may have caused dome flank instability. However, the volcanic debris avalanche trigger is interpreted to be a post-lithification tectonic influence.

The dilemma of gaps in carbonate stratigraphic sequences: A case history from the Jurassic of the Venetian Alps, Italy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zempolich, W.G.

The Lower Ammonitico Rosso (L.A.R.) of the western Venetian Alps is a thin, red nodular limestone that overlies a thick Late Triassic to Middle Jurassic (Aalenian) shallow-water platform sequence. It is thought to represent a Middle Jurassic (Bajocian) drowning event whereby the Trento Platform became a submerged plateau. The L.A.R. is problematic in that it (1) is rich in ammonites and other pelagic fauna; (2) contains stromatolites, oncolites, and shallow-water sedimentary structures; and (3) directly overlies platform sediments that contain complex brecciated fabrics filled by cement and Bajocian-age sediment. These seemingly contradictory features have generated much debate as to themore » sequence stratigraphy of the Trento Platform. New evidence suggests that the L.A.R. was deposited in a shallow-water environment following a period of subaerial exposure. In an east-west transect from the platform edge to platform interior, a clear transition is exhibited from high- and low-energy open-marine facies to restricted lagoonal facies. High-energy open-marine facies include well-sorted skeletal- and peloidal-rich sands possessing low-angle to planar cross stratification and thin, fairly sorted ammonite- and belemnite-rich gravels. Sands include both shallow-water and pelagic fauna; gravels commonly contain ripup clasts from underlying sediments. Low-energy open-marine facies consist of buff colored wackestones and packstones that contain ammonites, belemnites, pelagic bivalves, and peloids. With respect to paleogeography, the abrupt transition from open-marine facies at the platform edge to lagoonal facies in the platform interior indicates that thrombolites, stromatolites, and oncolites accumulated in a shallow restricted environment.« less

Structural development of an Archean Orogen, Western Point Lake, Northwest Territories

NASA Astrophysics Data System (ADS)

Kusky, Timothy M.

1991-08-01

The Point Lake orogen in the central Archean Slave Province of northwestern Canada preserves more than 10 km of structural relief through an eroded antiformal thrust stack and deeper anastomosing midcrustal mylonites. Fault restoration along a 25 km long transect requires a minimum of 69 km slip and 53 km horizontal shortening. In the western part of the orogen the basal decollement places mafic plutonic/volcanic rocks over an ancient tonalitic gneiss complex. Ten kilometers to the east in the Keskarrah Bay area, slices of gneiss unroofed on brittle thrusts shed molasse into several submerged basins. Conglomerates and associated thinly bedded sedimentary rocks are interpreted as channel, levee, and overbank facies of this thrust-related sedimentary fan system. The synorogenic erosion surface at the base of the conglomerate truncates premetamorphic or early metamorphic thrust faults formed during foreland propagation, while other thrusts related to hinterland-progressing imbrication displace this unconformity. Tightening of synorogenic depositional troughs resulted in the conglomerates' present localization in synclines to the west of associated thrust faults and steepening of structural dips. Eastern parts of the orogen consist of isoclinally folded graywackes composed largely of Mutti and Ricci-Lucchi turbidite facies B, C, and D, interpreted as submarine fan deposits eroded from a distant volcanic arc. Thrust faults in the metasedimentary terrane include highly disrupted slate horizons with meter-scale duplex structures, and recrystallized calcmylonites exhibiting sheath folds and boudin trains with very large interboudin distances. The sequence of fabric development and the overall geometry of this metasedimentary terrane strongly resembles younger forearc accretionary prisms. Conditions of deformation along the thrusts parallel the regional metamorphic zonation: amphibolite facies in the basal decollement through greenschist facies shear zones to cataclastic crush zones in the region of emergent thrusts in Keskarrah Bay. Depth differences can account for only half of the metamorphic gradient; thermal profiles which increased downwards in obducted greenstone belts and synthrusting plutonism explains other high metamorphic gradients. A tectonic model involving the collision of an accretionary prism with a continental margin best explains the structural and sedimentological evolution of the orogen.

Surficial geology mapping of the Arctic Ocean: using subbottom profiling and multibeam echosounding data sets to constrain the subsea north of 64° as a layer for the IBCAO

NASA Astrophysics Data System (ADS)

Mosher, D. C.; Baldwin, K.; Gebhardt, C.

2016-12-01

Barriers to data collection such as perennial ice cover, climate, and remoteness have contributed to a paucity of geologic data in the Arctic. The last decade, however, has seen a multi-national push to increase the quantity and extent of data available at high latitudes. With increased availability of geophysical and geological data holdings, we expand on previous mapping initiatives by creating a comprehensive surficial geology map as a layer to the International Bathymetric Chart of the Arctic Ocean (IBCAO), providing a way to collectively analyze physiography, morphology and geology. Acoustic facies derived from subbottom profiles, combined with morphology illuminated from IBCAO and multibeam bathymetric datasets, and ground truth data compiled from cores and samples are used to map surficial geology units. We identified over 25 seismo-acoustic facies leading to interpretation of 12 distinct geologic units for the Arctic Ocean. The largest variety of seismic facies occurs on the shelves, which demonstrate the complex ice-margin history (e.g. chaotic bottom echoes with amorphous subbottom reflections that imply ice scouring processes). Shelf-crossing troughs generally lead to trough mouth fans on the continental margin with characteristic glaciogenic debris flow deposits (acoustically transparent units) comprising the bulk of the sedimentary succession. Other areas of continental slopes show a variety of facies suggesting sediment mass failure and turbidite deposition. Vast areas of the deep water portion of the Arctic are dominated by parallel reflections, indicative of hemi-pelagic and turbidity current deposition. Some deep water parts of the basin, however, show evidence of current reworking (sigmoidal reflections within bedforms), and contain deep sea channels with thalwegs (bright reflections within channels) and levee deposits (reflection pinch-out). These results delineated in the surficial geology map provide a comprehensive database of regional geologic information of the Arctic Ocean that can be applied to a variety of disciplines, including the study of Arctic sedimentary processes, climatologic and oceanographic processes, environmental and geohazard risk assessment, resource management, and Extended Continental Shelf mapping.

Trace fossils and sedimentary facies from a Late Cambrian‐Early Ordovician tide‐dominated shelf (Santa Rosita Formation, northwest Argentina): Implications for ichnofacies models of shallow marine successions

USGS Publications Warehouse

Mángano, M. Gabriela; Buatois, Luis A.; Aceñolaza, Guillermo F.

1996-01-01

The Santa Rosita Formation is one the most widely distributed lower Paleozoic units of northwest Argentina. At the Quebrada del Salto Alto section, east of Purmamarca, Jujuy Province, it is represented by four sedimentary facies: thick‐bedded planar cross‐stratified quartzose sandstones (A), thin‐bedded planar cross‐stratified quartzose sandstones and mudstones (B), wave‐rippled sandstones and bioturbated mudstones (C), and black and greenish gray shales (D). Paleocurrent data, sandstone architecture, and sedimentary structures from faciès A and B indicate bipolar/bimodal paleoflows, suggesting the action of tidal currents. The succession is interpreted as that of a tide‐dominated shelf, with only secondary influence of wave processes. Trace fossils are restricted to facies B and C.The Cruziana ichnocoenosis is preserved on the soles of thin‐bedded planar cross‐stratified quartzose sandstones (faciès B). This ichnocoenosis consists of Conostichus isp., Cruziana omanica, C. semiplicata, C. cf. tortworthi, Cruziana isp. Helminthopsis abeli, Monomorphichnus bilinearis, M. multilineatus, Palaeophycus tubularis, Rusophycus carbonarias, R. latus, and R. isp. The occurrence of Cruziana semiplicata, C. omanica, C. cf. tortworthi, and Rusophycus latus supports a Late Cambrian‐Tremadoc age. Slabbing of Cruziana shows complex interactions between biologic and sedimentologic processes, and suggests a predominance of exhumed traces, washed out and recast by tractive sand deposition. Sandstone soles are densely packed with biogenic structures and exhibit distinctive clusters of Rusophycus isp. that most likely represent trilobite nesting burrows. The Cruziana ichnocoenosis records the resident fauna of a protected, lower intertidal to subtidal interbar setting.The Skolithos ichnocoenosis is represented by high to low density vertical burrows of Skolithos linearis, which extend downwards to the quartzose sandstone soles of faciès B and cross the Cruziana ichnocoenosis. The Skolithos ichnocoenosis represents colonization by suspension‐feeding organisms following a major change in environmental conditions, related to the migration of lower intertidal to subtidal sandwaves.The Planolites ichnocoenosis consists exclusively of Planolites montanus within mudstones overlying wave‐rippled sandstones (facies C). The Planolites ichnocoenosis records opportunistic colonization by inf aunal deposit feeders that mined the organic‐rich fine‐grained sediment during the waning phase of storms that scoured organic detritus from the sea bottom.The section records, from base to top, a Cruziana‐Skolithos ichnofacies zone, a Skolithos ichnofacies zone and an unbioturbated zone typified by the thick‐bedded cross‐stratified quartzose sandstone (fades A). This trend reflects progressively higher energy conditions linked to the establishment of a large sand wave complex. The presence of a mixed Cruziana‐Skolithos ichnofacies in the lower interval reflects changes in substrate and energy levels, rather than water depth. Accordingly, contrasting ichnocoenoses from interbars (Cruziana) and sandwaves (Skolithos) must be considered an example of ichnofacies controlled by local parameters instead of general bathymétrie trends. Conversely, the vertical replacement of the Cruziana ichnofacies by the Skolithos ichnofacies towards the middle interval of the section reflects the environmental changes associated with the transition between the intertidal and subtidal zones. As overall tidal energy increases from supratidal to subtidal settings, the Skolithos ichnofacies tends to occur seaward of the Cruzianaichnofacies in tide‐dominated shallow marine environments. Therefore, onshore‐offshore ichnofacies replacement in tide‐dominated shallow seas is opposite to that in wave‐dominated marine settings.

Sedimentary architecture and depositional controls of a Pliocene river-dominated delta in the semi-isolated Dacian Basin, Black Sea

NASA Astrophysics Data System (ADS)

Jorissen, Elisabeth L.; de Leeuw, Arjan; van Baak, Christiaan G. C.; Mandic, Oleg; Stoica, Marius; Abels, Hemmo A.; Krijgsman, Wout

2018-06-01

Sedimentological facies models for (semi-)isolated basins are less well developed than those for marine environments, but are critical for our understanding of both present-day and ancient deltaic sediment records in restricted depositional environments. This study considers an 835 m thick sedimentary succession of mid-Pliocene age, which accumulated in the Dacian Basin, a former embayment of the Black Sea. Detailed sedimentological and palaeontological analyses reveal a regression from distal prodelta deposits with brackish water faunas to delta-top deposits with freshwater faunas. Sediments contain frequent hyperpycnal plumes and an enrichment in terrestrial organic material, ichnofossils and in situ brackish and freshwater faunas. Deltaic progradation created thin, sharply-based sand bodies formed by multiple terminal distributary channels, covering a wide depositional area. The system experienced frequent delta-lobe switching, resulting in numerous thin parasequences. Parasequences are overlain by erosive reddish oxidized sand beds, enriched in broken, abraded brackish and freshwater shells. These beds were formed after sediment starvation, on top of abandoned delta lobes during each flooding event. A robust magnetostratigraphic time frame allowed for comparison between the observed sedimentary cyclicity and the amplitude and frequency of astronomical forcing cycles. Our results indicate that parasequence frequencies are significantly higher than the number of time equivalent astronomical cycles. This suggests that delta-lobe switching was due to autogenic processes. We consider the observed facies architecture typical for a delta prograding on a low-gradient slope into a shallow, brackish, protected, semi-isolated basin. Furthermore, in the absence of significant wave and tidal influence, sediment progradation in such a protected depositional setting shaped a delta, strongly river-dominated.

Relative role of transfer zones in controlling sequence stacking patterns and facies distribution: insights from the Fushan Depression, South China Sea

NASA Astrophysics Data System (ADS)

Liu, Entao; Wang, Hua; Li, Yuan; Huang, Chuanyan

2015-04-01

In sedimentary basins, a transfer zone can be defined as a coordinated system of deformational features which has good prospects for hydrocarbon exploration. Although the term 'transfer zone' has been widely applied to the study of extensional basins, little attention has been paid to its controlling effect on sequence tracking pattern and depositional facies distribution. Fushan Depression is a half-graben rift sub-basin, located in the southeast of the Beibuwan Basin, South China Sea. In this study, comparative analysis of seismic reflection, palaeogeomorphology, fault activity and depositional facies distribution in the southern slope indicates that three different types of sequence stacking patterns (i.e. multi-level step-fault belt in the western area, flexure slope belt in the central area, gentle slope belt in the eastern area) were developed along the southern slope, together with a large-scale transfer zone in the central area, at the intersection of the western and eastern fault systems. Further analysis shows that the transfer zone played an important role in the diversity of sequence stacking patterns in the southern slope by dividing the Fushan Depression into two non-interfering tectonic systems forming different sequence patterns, and leading to the formation of the flexure slope belt in the central area. The transfer zone had an important controlling effect on not only the diversity of sequence tracking patterns, but also the facies distribution on the relay ramp. During the high-stand stage, under the controlling effect of the transfer zone, the sediments contain a significant proportion of coarser material accumulated and distributed along the ramp axis. By contrast, during the low-stand stage, the transfer zone did not seem to contribute significantly to the low-stand fan distribution which was mainly controlled by the slope gradient (palaeogeomorphology). Therefore, analysis of the transfer zone can provide a new perspective for basin analysis. In addition, the transfer zone area demonstrated unique hydrocarbon accumulation models different from the western and eastern areas. It was not only a structural high combined with sufficient coarse-grained reservoir quality sands, but was also associated with large-scale sublacustrine fan deposits with high quality reservoirs, indicating that the recognition of transfer zones can improve the prediction of hydrocarbon occurrences in similar settings.

Glaciomarine sedimentation and bottom current activity on the north-western and northern continental margins of Svalbard during the late Quaternary

NASA Astrophysics Data System (ADS)

Chauhan, Teena; Noormets, Riko; Rasmussen, Tine L.

2016-04-01

Palaeo-bottom current strength of the West Spitsbergen Current (WSC) and the influence of the Svalbard-Barents Sea Ice Sheet (SBIS) on the depositional environment along the northern Svalbard margins are poorly known. Two gravity cores from the southern Yermak Plateau and the upper slope north of Nordaustlandet, covering marine isotope stage (MIS) 1 to MIS 5, are investigated. Five lithofacies, based on grain size distribution, silt/clay ratio, content and mean of sortable silt (SS), are distinguished to characterise the contourite-dominated sedimentary environments. In addition, depositional environments are described using total organic carbon (TOC), total sulphur (TS) and calcium carbonate (CaCO3) contents of sediments. Facies A, containing coarse SS, suggests strong bottom current activity and good bottom water ventilation conditions as inferred from low TOC content. This facies was deposited during the glacial periods MIS 4, MIS 2 and during the late Holocene. Facies B is dominated by fine SS indicating weak bottom current and poor ventilation (cf. high TOC content of 1.2-1.6%), and correlates with the MIS 4/3 and MIS 2/1 transition periods. With an equal amount of clay and sand, fine SS and high content of TOC, facies C indicates reduced bottom current strength for intervals with sediment supply from proximal sources such as icebergs, sea ice or meltwater discharge. This facies was deposited during the last glacial maximum. Facies D represents mass-flow deposits on the northern Svalbard margin attributed to the SBIS advance at or near the shelf edge. Facies E sediments indicating moderate bottom current strength were deposited during MIS 5 and MIS 3, and during parts of MIS 2. This first late Quaternary proxy record of the WSC flow and sedimentation history from the northern Svalbard margin suggests that the oceanographic conditions and ice sheet processes have exerted first-order control on sediment properties.

Discontinuity surfaces in the Lower Cretaceous of the high Andes (Mendoza, Argentina): Trace fossils and environmental implications

NASA Astrophysics Data System (ADS)

Mangano, M. G.; Buatois, L. A.

The paleoecologic and paleoenvironmental significance of trace fossils related to discontinuity surfaces in the Lower Cretaceous marine deposits of the Aconcagua area are analysed here. Carbonate-evaporite shoaling-upward cycles, developed by high organic production in a shallow hypersaline restricted environment, make up the section. Two types of cycles are defined, being mainly distinguished by their subtidal unit. Cycle I begins with a highly dolomitized lower subtidal unit (Facies A), followed upward by an intensely bioturbated upper subtidal unit (Facies B). The nodular packstone facies (B 1) is capped by a discontinuity surface (firmground or hardground) and occasionally overlain by an oystreid bed (Facies C). Cycle II is characterized by a pelletoidal subtidal unit (Facies B 2) with an abnormal salinity impoverished fauna. Both cycles end with intertidal to supratidal evaporite deposits (Facies D and E, respectively). Attention is particularly focused on cycle I due to its ichologic content. The mode of preservation and the distribution of trace fossils in nodular packstone facies are controlled by original substrate consolidation. Thalassinoides paradoxicus (pre-omission suite) represents colonization in a soft bottom, while Thalassinoides suevicus (omission suite pre-lithification) is apparently restricted to firm substrates. When consolidation processes are interrupted early, only an embryonic hard-ground that represents a minor halt in sedimentation was developed. Sometimes, consolidation processes continued leading to an intraformational hardground. Colonization by Trypanites solitarius (omission suite post-lithification) and Exogyra-like oystreids possibly characterizes hard substrate stage. When two discontinuity surfaces follow closely, a post-omission suite may be defined in relation to the lower cemented surface. As trace fossils are so closely related to changes in the degree of bottom lithification, they prove to be very useful as indicators of substrate evolution. The presence of discontinuity surfaces, evidenced by trace fossil association, suggests changes of sedimentary rate and environmental conditions that should be taken into account in future studies seeking to erect depositional models for these Cretaceous deposits.

Sedimentology of the fluvial and fluvio-marine facies of the Bahariya Formation (Early Cenomanian), Bahariya Oasis, Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Khalifa, M. A.; Catuneanu, O.

2008-05-01

The Lower Cenomanian Bahariya Formation in the Bahariya Oasis, Western Desert, Egypt, was deposited under two coeval environmental conditions. A fully fluvial system occurs in the southern portion of the Bahariya Oasis, including depositional products of meandering and braided streams, and a coeval fluvio-marine setting is dominant to the north. These deposits are organized into four unconformity-bounded depositional sequences, whose architecture is shaped by a complex system of incised valleys. The fluvial portion of the lower two depositional sequences is dominated by low-energy, meandering systems with a tabular geometry, dominated by overbank facies. The fluvial deposits of the upper two sequences represent the product of sedimentation within braided streams, and consist mainly of amalgamated channel-fills. The braided fluvial systems form the fill of incised valleys whose orientation follows a southeast-northwest trending direction, and which truncate the underlying sequences. Four sedimentary facies have been identified within the braided-channel systems, namely thin-laminated sandstones (Sh), cross-bedded sandstones (Sp, St), massive ferruginous sandstones (Sm) and variegated mudstones (Fm). The exposed off-channel overbank facies of the meandering systems include floodplain (Fm) and crevasse splay (Sl) facies. The fluvio-marine depositional systems consist of interbedded floodplain, coastal and shallow-marine deposits. The floodplain facies include fine-grained sandstones (Sf), laminated siltstones (Stf) and mudstones (Mf) that show fining-upward cycles. The coastal to shallow-marine facies consist primarily of mudstones (Mc) and glauconitic sandstones (Gc) organized vertically in coarsening-upward prograding cyclothems topped by thin crusts of ferricrete (Fc). The four depositional sequences are present across the Bahariya Oasis, albeit with varying degrees of preservation related to post-depositional erosion associated with the formation of sequence boundaries. These unconformities may be overlain by braided-stream channel sandstones at the base of incised valleys, or marked by ferricrete paleosols (lithofacies Fc) in the interfluve areas.

Liquification and soft-sediment deformation in a limestone megabreccia: The Ayabacas giant collapse, Cretaceous, southern Peru

NASA Astrophysics Data System (ADS)

Callot, Pierre; Odonne, Francis; Sempere, Thierry

2008-12-01

In the back-arc basin of southern Peru, the bulk of the mid-Cretaceous carbonate platform collapsed near the Turonian-Coniacian boundary (~ 90-89 Ma), due to slope creation and resulting oversteepening. The resulting mass-wasting deposits, namely the Ayabacas Formation, consist of a megabreccia which is organised from NE to SW in relation with two major fault systems. Facies of sediment reworking (such as brecciation, liquification, sedimentary dykes and soft-sediment deformation) are described and four types of resedimentation facies are define. In the northeastern part of the study area, deposits mainly consist of a mixture of very heterometric clasts and blocks (millimetric to kilometric in size), mainly carbonate but also sandy-marly in nature, floating in sandy-marly matrix that exhibits features of liquification (sedimentary dykes and flows) and plastic deformation. Here, resedimentation facies are characterized by deformations and a brecciated facies at each observation scale (from aerial photographs to thin sections) and are therefore defined as fractal or multi-scale breccias. Some clasts and large amounts of the matrix were derived from the underlying clay-rich sandstones of the Murco Formation. These materials were prone to liquification and plastic deformation, allowing them to act as a sliding sole that facilitated the slides and the downslope movement of large limestone rafts. In the southwestern part of the study area, only limestone breccias are observed, in alternation with well-stratified levels. The sliding sole of plastically deformable siliciclastic sediments that previously acted as a lubricating layer was not present here, as materials were more deeply buried. Variations in the degree of sediment lithification from northeast to southwest are inferred to have existed before the collapse and also within the sedimentary succession in the northeastern part. In particular, limestones were well-cemented at the base of the carbonate succession and formed a cap that prevented water to escape from the underlying siliciclastic materials. Such a succession allowed the formation of limestone clasts and of a slide sole constituted by water-saturated siliciclastic materials. In the southern part of the study area, the slide surface was located within the Murco Formation in the upper part of the collapse and just above the Murco Formation downslope. The collapse was frontally confined as it was blocked downslope by a topographic high that folded the whole limestone succession. In the northern part of the study area, the slide surface was also within the Murco Formation in the upper part, but occurs within the limestone succession downslope, due to higher subsidence that buried the sediments more deeply. The compressional structures affecting the limestone succession in the south are not observed there, suggesting that the toe of the collapse was not blocked here.

Metamorphic style and development of the blueschist- to eclogite-facies rocks, Cyclades, Greece

NASA Astrophysics Data System (ADS)

Schumacher, J. C.; Brady, J. B.; Cheney, J. T.

2008-07-01

The island of Syros, Greece is part of the Attic-Cycladic blueschist belt, formed during Mesozoic Eurasia-Africa subduction. The rocks of Syros can be broadly divided into three tectono-stratigraphic units: (I) metamorphosed sedimentary and volcanic rocks (marble-schist sequence), (II) remnants of oceanic crust with fault-bounded packages of blueschist/eclogite-facies mafic rocks and serpentinite (mafic-ultramafic rocks) and (III) the Vari gneiss, which is a tectonic klippe. Low-temperature, high-pressure assemblages are found on several islands in the Cyclades. The best preserved of these rocks are on Syros and Sifnos islands. Mineral compositions and peak metamorphic assemblages are similar on both islands. Both islands are considered to share similar P-T histories with highest-pressure mineral assemblages reflecting conditions of at least 15 kbar and about 500°C.

The sedimentary record of India-Asia collision: an evaluation of new and existing constraints

NASA Astrophysics Data System (ADS)

Najman, Yani; Henderson, Alex; Boudagher-Fadel, Marcelle; Godin, Laurent; Parrish, Randy; Bown, Paul; Garzanti, Eduardo; Horstwood, Matt; Jenks, Dan

2010-05-01

The age and degree of diachroneity of India-Asia collision is critical to construction of models of orogenesis and to understanding the causes of spatial variations in Himalayan evolution along strike. The age of collision is quoted between ~65-34 Ma (Jaeger et al 1989; Aitchison et al 2007) and the degree of dichroneity is considered negligible (Searle et al 1997) to substantial (Rowley 1998). Such discrepancy is, to some extent, the result of the different definitions and methods used to define the collision. Here, we evaluate constraints from the sedimentary record preserved in the suture zone and Tethyan Himalaya where a minimum age to collision has been constrained by determining 1) the timing of cessation of marine facies, 2) first evidence of Asian detritus deposited on the Indian plate and 3) first evidence of mixed Indian-Asian detritus in the sedimentary record. Extensive previous work has been carried out on the Indus molasse of the Indus Suture zone in Ladakh, India. Here, cessation of marine facies is dated at 50.5 Ma (Green et al. 2008), with the underlying Chogdo Formation considered to show first evidence of mixed Indian and Asian provenance, and be the oldest Formation of Asian-derived provenance to lie in sedimentary contact with the underlying Indian plate (Clift et al 2001, 2002), thus constraining collision at >50.5 Ma. However, our new mapping and provenance analyses on these rocks show that there is no unequivocal evidence of Indian-derived material in the Chogdo Formation, nor that the Chogdo Formation lies in sedimentary contact with the underlying Indian plate (Henderson et al., in review). Thus we question the timing of Indian-Asian collision based on these evidences. South of the suture zone in India and Tibet, we carried out similar investigations of the youngest Tethyan strata. In Ladakh, Indian plate passive margin limestones of the Paleocene Dibling Fm are overlain by the youngest marine facies of the region, the marine Kong Fm and fluvio-deltaic Chulung La Fm (Garzanti et al 1987). The age of the Kong and Chulung La Formations is disputed, from P5/6 (Fuchs & Willems 1990) to P8 (Garzanti et al 1987) the discrepancy possibly the result of research at different locations. Provenance is considered to be either ophiolitic from the Indian plate (Fuchs & Willems 1990) or containing detritus from the Trans-Himalayan arc of the Asian plate (Garzanti et al 1987; Critelli & Garzanti 1994). Our samples from the Kong Fm contained planktic foraminifera indicating a Middle to Early P6 age (54-56 Ma) and larger benthic foraminifera indicating Middle SBZ8 age (53-54 Ma). U-Pb dating of detrital zircons allows discrimination between Asian provenance (dominated by Mesozoic grains from the Trans-Himalayan arc) and Indian provenance (characterized by Precambrian grains and an absence of Mesozoic grains). Our data from the Kong and Chulung La Fms shows a primary provenance from the Asian plate. Thus collision is constrained by arrival of Asian detritus on the Indian plate by 54 Ma. In Tingri, Tibet, Indian plate passive margin limestones of the Zephure Shan Fm extend to the early Eocene, overlain by marine facies of the Pengqu Fm. The youngest marine facies have been dated at 34 Ma (Wang et al. 2002), but this age is disputed by other workers who assign an age of 50 Ma (Zhu et al. 2005). Our new biostratigraphic data from the Pengqu Fm show that calcareous nannofossil species are compatible with an age corresponding to Zones NP11-12 (50.6-53.5 Ma). The dominant population of zircons have Cretaceous-Paleocene ages, derived from the Asian plate, thus indicating that contact between India and Asia had occurred by this time. We therefore conclude that although the Indus Molasse does not provide constraint to the timing of India-Asia collision as previously thought, data from the Tethyan strata show that collision occurred by 54 Ma in the west, with only extremely limited, if any diachroneity eastward.

Non-marine carbonate facies, facies models and palaeogeographies of the Purbeck Formation (Late Jurassic to Early Cretaceous) of Dorset (Southern England).

NASA Astrophysics Data System (ADS)

Gallois, Arnaud; Bosence, Dan; Burgess, Peter

2015-04-01

Non-marine carbonates are relatively poorly understood compared with their more abundant marine counterparts. Sedimentary facies and basin architecture are controlled by a range of environmental parameters such as climate, hydrology and tectonic setting but facies models are few and limited in their predictive value. Following the discovery of extensive Early Cretaceous, non-marine carbonate hydrocarbon reservoirs in the South Atlantic, the interest of understanding such complex deposits has increased during recent years. This study is developing a new depositional model for non-marine carbonates in a semi-arid climate setting in an extensional basin; the Purbeck Formation (Upper Jurassic - Lower Cretaceous) in Dorset (Southern England). Outcrop study coupled with subsurface data analysis and petrographic study (sedimentology and early diagenesis) aims to constrain and improve published models of depositional settings. Facies models for brackish water and hypersaline water conditions of these lacustrine to palustrine carbonates deposited in the syn-rift phase of the Wessex Basin will be presented. Particular attention focusses on the factors that control the accumulation of in-situ microbialite mounds that occur within bedded inter-mound packstones-grainstones in the lower Purbeck. The microbialite mounds are located in three units (locally known as the Skull Cap, the Hard Cap and the Soft Cap) separated by three fossil soils (locally known as the Basal, the Lower and the Great Dirt Beds) respectively within three shallowing upward lacustrine sequences. These complex microbialite mounds (up to 4m high), are composed of tabular small-scale mounds (flat and long, up to 50cm high) divided into four subfacies. Many of these small-scale mounds developed around trees and branches which are preserved as moulds (or silicified wood) which are surrounded by a burrowed mudstone-wackestone collar. Subsequently a thrombolite framework developed on the upper part only within bedded inter-mound packestones-grainstones. Finally a discontinuous basal laminated subfacies can be found overlaying the fossil soils. The overall control on facies and their distribution is the tectonic control as highlighted by the activity of the two main extensional faults during Purbeck times. The tectonic control on development of microbialite mounds is indicated by their relationship with the relay ramp. Their occurrence is controlled by palaeotopography generated on sub-aerial exposure surfaces, palaesols and early conifer trees and developed mainly on the shallowest area of the lake as indicated by their relationship with the inter-mound packstone-grainstone facies and the palaeosols. The new depositional models developed in this study integrate sedimentological facies models with the syn-rift setting of the Wessex Basin to explain the distribution of the microbialite mounds.

Middle to Upper Jurassic sedimentary sequences and marine biota of the early Indian Ocean (Southwest Madagascar): some biostratigraphic, palaeoecologic and palaeobiogeographic conclusions

NASA Astrophysics Data System (ADS)

Mette, Wolfgang

2004-03-01

As part of an intradisciplinary project which was concerned with the early rifting processes between Madagascar and East Africa, the Middle to Upper Jurassic sedimentary sequences of the Morondava Basin in Southwest Madagascar has been investigated with respect to biostratigraphy, sedimentary facies and palaeoecology. The transgressive sedimentary sections in the Bajocian and Callovian-Oxfordian yield rich macro- and microfossil assemblages which improved the biostratigraphic framework and gave some important information about the palaeoenvironments. Palaeogeographic distribution patterns of the Bajocian ostracod Paradoxorhyncha are suggestive of a migration along the southern shores of Gondwana between Madagascar, Australia and South America. The Callovian ostracods show strong affinities to the Indian faunas, indicating existence of a free migration route for shallow marine benthic organisms between Madagascar and India. Significant faunal differences between Madagascar and Tanzania suggest a physical or environmental migration barrier between Madagascar and East Africa during the Callovian to Kimmeridgian interval. The Upper Jurassic ostracods from the northern and eastern margin of Gondwana show a very high degree of endemism and they can be assigned to two faunal provinces in North Gondwana (Arabia, Near East, North Africa) and South Gondwana (India, Madagascar, East Africa).

Constraining the sedimentology and stratigraphy of submarine intraslope lobe deposits using exhumed examples from the Karoo Basin, South Africa

NASA Astrophysics Data System (ADS)

Spychala, Y. T.; Hodgson, D. M.; Flint, S. S.; Mountney, N. P.

2015-06-01

Intraslope lobe deposits provide a process record of the infill of accommodation on submarine slopes and their recognition enables the accurate reconstruction of the stratigraphic evolution of submarine slope systems. Extensive exposures of discrete sand-prone packages in Units D/E and E, Fort Brown Formation, Karoo Basin, South Africa, permit analysis of the sedimentology and stacking patterns of three intraslope lobe complexes and their palaeogeographic reconstruction via bed-scale analysis and physical correlation of key stratal surfaces. The sand-prone packages comprise tabular, aggradationally to slightly compensationally stacked lobe deposits with constituent facies associations that can be attributed to lobe axis, lobe off-axis, lobe-fringe and distal lobe-fringe environments. Locally, intraslope lobe deposits are incised by low aspect ratio channels that mark basinward progradation of the deepwater system. The origin of accommodation on the slope for lobe deposition is interpreted to be due to differential compaction or healing of scars from mass wasting processes. The stacking patterns and sedimentary facies arrangement identified in this study are distinct from those of more commonly recognized basin-floor lobe deposits, thereby enabling the establishment of recognition criteria for intraslope lobe deposits in other less well exposed and studied fine-grained systems. Compared to basin floor lobes, intraslope lobes are smaller in volume, influenced by higher degrees of confinement, and tend to show aggradational stacking patterns.

Evolution of a Holocene delta driven by episodic sediment delivery and coseismic deformation, Puget Sound, Washington, USA

USGS Publications Warehouse

Barnhardt, W.A.; Sherrod, B.L.

2006-01-01

Episodic, large-volume pulses of volcaniclastic sediment and coseismic subsidence of the coast have influenced the development of a late Holocene delta at southern Puget Sound. Multibeam bathymetry, ground-penetrating radar (GPR) and vibracores were used to investigate the morphologic and stratigraphic evolution of the Nisqually River delta. Two fluvial–deltaic facies are recognized on the basis of GPR data and sedimentary characteristics in cores, which suggest partial emplacement from sediment-rich floods that originated on Mount Rainier. Facies S consists of stacked, sheet-like deposits of andesitic sand up to 4 m thick that are continuous across the entire width of the delta. Flat-lying, highly reflective surfaces separate the sand sheets and comprise important facies boundaries. Beds of massive, pumice- and charcoal-rich sand overlie one of the buried surfaces. Organic-rich material from that surface, beneath the massive sand, yielded a radiocarbon age that is time-correlative with a series of known eruptive events that generated lahars in the upper Nisqually River valley. Facies CF consists of linear sandbodies or palaeochannels incised into facies S on the lower delta plain. Radiocarbon ages of wood fragments in the sandy channel-fill deposits also correlate in time to lahar deposits in upstream areas. Intrusive, sand-filled dikes and sills indicate liquefaction caused by post-depositional ground shaking related to earthquakes. Continued progradation of the delta into Puget Sound is currently balanced by tidal-current reworking, which redistributes sediment into large fields of ebb- and flood-oriented bedforms.

Sedimentary processes and architecture of Upper Cretaceous deep-sea channel deposits: a case from the Skole Nappe, Polish Outer Carpathians

NASA Astrophysics Data System (ADS)

Łapcik, Piotr

2018-02-01

Deep-sea channels are one of the architectonic elements, forming the main conduits for sand and gravel material in the turbidite depositional systems. Deep-sea channel facies are mostly represented by stacking of thick-bedded massive sandstones with abundant coarse-grained material, ripped-up clasts, amalgamation and large scale erosional structures. The Manasterz Quarry of the Ropianka Formation (Upper Cretaceous, Skole Nappe, Carpathians) contains a succession of at least 31 m of thick-bedded high-density turbidites alternated with clast-rich sandy debrites, which are interpreted as axial deposits of a deep-sea channel. The section studied includes 5 or 6 storeys with debrite basal lag deposits covered by amalgamated turbidite fills. The thickness of particular storeys varies from 2.5 to 13 m. Vertical stacking of similar facies through the whole thickness of the section suggest a hierarchically higher channel-fill or a channel complex set, with an aggradation rate higher than its lateral migration. Such channel axis facies cannot aggrade without simultaneous aggradation of levee confinement, which was distinguished in an associated section located to the NW from the Manasterz Quarry. Lateral offset of channel axis facies into channel margin or channel levee facies is estimated at less than 800 m. The Manasterz Quarry section represents mostly the filling and amalgamation stage of channel formation. The described channel architectural elements of the Ropianka Formation are located within the so-called Łańcut Channel Zone, which was previously thought to be Oligocene but may have been present already in the Late Cretaceous.

Sedimentology of the Upper Triassic-Lower Jurassic (?) Mosolotsane Formation (Karoo Supergroup), Kalahari Karoo Basin, Botswana

NASA Astrophysics Data System (ADS)

Bordy, Emese M.; Segwabe, Tebogo; Makuke, Bonno

2010-08-01

The Mosolotsane Formation (Lebung Group, Karoo Supergroup) in the Kalahari Karoo Basin of Botswana is a scantly exposed, terrestrial red bed succession which is lithologically correlated with the Late Triassic to Early Jurassic Molteno and Elliot Formations (Karoo Supergroup) in South Africa. New evidence derived from field observations and borehole data via sedimentary facies analysis allowed the assessment of the facies characteristics, distribution and thickness variation as well as palaeo-current directions and sediment composition, and resulted in the palaeo-environmental reconstruction of this poorly known unit. Our results show that the Mosolotsane Formation was deposited in a relatively low-sinuosity meandering river system that drained in a possibly semi-arid environment. Sandstone petrography revealed mainly quartz-rich arenites that were derived from a continental block provenance dominated by metamorphic and/or igneous rocks. Palaeo-flow measurements indicate reasonably strong, unidirectional current patterns with mean flow directions from southeast and east-southeast to northwest and west-northwest. Regional thickness and facies distributions as well as palaeo-drainage indicators suggest that the main depocenter of the Mosolotsane Formation was in the central part of the Kalahari Karoo Basin. Separated from this main depocenter by a west-northwest - east-southeast trending elevated area, an additional depocenter was situated in the north-northeast part of the basin and probably formed part of the Mid-Zambezi Karoo Basin. In addition, data also suggests that further northeast-southwest trending uplands probably existed in the northwest and east, the latter separating the main Kalahari Karoo depocenter from the Tuli Basin.

Facies and log signatures of sequence boundaries in Sembakung area, Tarakan Basin, East Kalimantan, Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bambang, P.; Hardjono, M.; Silalahi, L.

1996-08-01

Tarakan basin is one of the basins in East Kalimantan having a complicated geological condition. Tectonic repetition developed in this area constructed various stratigraphic traps. Sedimentary development in log data shows continuous regression in Meliat and Tabul Formations (Middle Meocene), Santul Formation (Late Miocene), Tarakan Formation (Pliocene) and Bunyu Formation (Pleistocene), Supported by seismic data, stratigraphic sequence in the basin is obvious, especially in Sembakung-Bangkudulis area. The sequence boundaries, mainly {open_quotes}lowstand{close_quotes} distribution as good prospective trap, can be mapped by applying tract systems and studying wavelet extract as seismic expression character of a reservoir. Subtle changes in pattern of stratigraphicmore » sequences can become a hint of sedimentary environment and its lithology content, supporting both exploration and exploitation planning.« less

Diagenetic Iron Cycling in Ancient Alkaline Saline Lacustrine Sedimentary Rocks: A Case Study on the Jurassic Brushy Basin Member of the Morrison Formation, Colorado Plateau, USA

NASA Astrophysics Data System (ADS)

Potter-McIntyre, S. L.; Chan, M. A.; McPherson, B. J. O. L.

2014-12-01

The upper part of the Brushy Basin Member in the Four Corners region of the U.S. was deposited in an ephemeral alkaline saline lake system with copious input of volcanic ash. The variegated shale formation provides a setting for the study of early diagenetic iron cycling that records the action of alkaline saline fluid chemistries reacting with volcaniclastic sediments in the presence of microbes. A bull's-eye pattern of authigenic minerals with increasing alteration towards the basinal center similar to modern alkaline saline lakes provides evidence for an extreme paleoenvironmental interpretation. The purpose of this research is to document specific factors, such as reactive sediments, microbial influences, and grain size that affect concretion formation and iron cycling in an ancient extreme environment. Three broad diagenetic facies are interpreted by color and associated bioturbation features: red, green and intermediate. Diagenetic facies reflect meter-scale paleotopography: red facies represent shallow water to subaerial, oxidizing conditions; green facies reflect saturated conditions and reducing pore water chemistry shortly after deposition, and intermediate facies represent a combination of the previous two conditions. Evidence of biotic influence is abundant and trace fossils exhibit patterns associated with the diagenetic facies. Red diagenetic facies typically contain burrows and root traces and green diagenetic facies exhibit restricted biotic diversity typically limited to algal molds (vugs). Microbial fossils are well-preserved and are in close proximity to specific iron mineral textures suggesting biotic influence on the crystal morphology. Three categories of concretions are characterized based on mineralogy: carbonate, iron (oxyhydr)oxide and phosphate concretions. Concretion mineralogy and size vary within an outcrop and even within a stratigraphic horizon such that more than one main category is typically present in an outcrop. Variation in concretion mineralogy and morphology within the Brushy Basin Member suggests that alkaline saline fluid chemistries in concert with microbial interaction created diagenetic microenvironments within a larger lake system to influence iron cycling and these reactions can be spatially variable even on 10s of cm scales.

Is There any Relationship Between the Santa Elena Depression and Chicxulub Impact Crater, Northwestern Yucatan Peninsula, Mexico?

NASA Astrophysics Data System (ADS)

Lefticariu, L.

2005-05-01

The Terminal Cretaceous Chicxulub Impact Crater had a strong control on the depositional and diagenetic history of the northern Yucatan Platform during most of the Cenozoic Era. The Chicxulub Sedimentary Basin (henceforth Basin), which approximately coincides with the impact crater, is circumscribed by a concentration of karstic sinkholes known as the Ring of Cenotes. Santa Elena Depression (henceforth Depression) is the name proposed for the bowl-shaped buried feature, first contoured by geophysical studies, immediately south of the Basin, in the area where the Ticul 1 and UNAM 5 wells were drilled. Lithologic, petrographic, and biostratigraphic data on PEMEX, UNAM, and ICDP cores show that: 1) Cenozoic deposits are much thicker inside the Basin than inside the Depression, 2) in general, the Cenozoic formations from inside the Depression are the thickest among those outside the Basin, 3) variably dolomitized pelagic or outer-platform wackestone or mudstone occur both inside the Basin and Depression, 4) the age of the deeper-water sedimentary carbonate rocks is Paleocene-Eocene inside the Basin and Paleocene?-Early Eocene inside the Depression, 5) the oldest formations that crop out are of Middle Eocene age at the edge of the Basin and Early-Middle Eocene age inside the Depression, 6) saline lake deposits, that consist chiefly of anhydrite, gypsum, and fine carbonate, and also contain quartz, chert, clay, zeolite, potassium feldspar, pyrite, and fragments of wood, are present in the Cenozoic section of the UNAM 5 core between 282 and 198 m below the present land surface, 7) the dolomite, subaerial exposure features (subaerial crusts, vugs, karst, dedolomite), and vug-filling cement from the Eocene formations are more abundant inside the Depression than inside the Basin. The depositional environments that are proposed for explaining the Cenozoic facies succession within the Santa Elena Depression are: 1) deeper marine water (Paleocene?-Early Eocene), 2) relatively isolated saline lake (Middle Eocene), and 3) shallow marine water (Middle-Late Eocene?). In places, the deeper-water facies are similar to those within the Chicxulub Sedimentary Basin. The shallow-water facies is similar to those occurring outside the Basin. In general, quartz and silicates are rare in the Cenozoic sedimentary carbonate of the northwestern Yucatan Peninsula. Therefore, their presence in the UNAM 5 core could be attributed to either impact breccia reworking or silicic volcanic processes. Quartz, chert, zeolite, and clay also are common in the suevite breccia of both Yax-1 and UNAM 5 cores. The fact that the Santa Elena Depression was a distinct sedimentary basin during much of the Paleogene could be explained by any or a combination of the following hypotheses: 1) In spite of being located outside the cenote ring, the Depression is a sub-basin of the larger and deeper Chicxulub Sedimentary Basin and is therefore located within the Chicxulub Impact Crater, 2) the Depression coincides with an impact crater distinct from the Chicxulub Impact Crater, 3) the Depression formed after the Chicxulub bolide impact due to slumping, crater wall failure, or larger-scale tectonic processes. The lack of conclusive evidence for multiple impact breccia layers in the northwestern Yucatan Peninsula, corroborated with the presence on top of the impact breccia from UNAM 5 core of deeper-water limestone similar to that of Late Paleocene-Early Eocene age from Yax-1 core, would be more consistent with either the first or third hypothesis.

Improving age-depth models using sedimentary proxies for accumulation rates in fluvio-lacustrine deposits

NASA Astrophysics Data System (ADS)

Minderhoud, Philip S. J.; Cohen, Kim M.; Toonen, Willem. H. J.; Erkens, Gilles; Hoek, Wim Z.

2017-04-01

Lacustrine fills, including those of oxbow lakes in river floodplains, often hold valuable sedimentary and biological proxy records of palaeo-environmental change. Precise dating of accumulated sediments at levels throughout these records is crucial for interpretation and correlation of (proxy) data existing within the fills. Typically, dates are gathered from multiple sampled levels and their results are combined in age-depth models to estimate the ages of events identified between the datings. In this paper, a method of age-depth modelling is presented that varies the vertical accumulation rate of the lake fill based on continuous sedimentary data. In between Bayesian calibrated radiocarbon dates, this produces a modified non-linear age-depth relation based on sedimentology rather than linear or spline interpolation. The method is showcased on a core of an infilled palaeomeander at the floodplain edge of the river Rhine near Rheinberg (Germany). The sequence spans from 4.7 to 2.9 ka cal BP and consists of 5.5 meters of laminated lacustrine, organo-clastic mud, covered by 1 meter of peaty clay. Four radiocarbon dates provide direct dating control, mapping and dating in the wider surroundings provide additional control. The laminated, organo-clastic facies of the oxbow fill contains a record of nearby fluvial-geomorphological activity, including meander reconfiguration events and passage of rare large floods, recognized as fluctuations in coarseness and amount of allochthonous clastic sediment input. Continuous along-core sampling and measurement of loss-on-ignition (LOI) provided a fast way of expressing the variation in clastic sedimentation influx from the nearby river versus autochthonous organic deposition derived from biogenic production in the lake itself. This low-cost sedimentary proxy data feeds into the age-depth modelling. The sedimentology-modelled age-depth relation (re)produces the distinct lithological boundaries in the fill as marked changes in sedimentation rate. Especially the organo-clastic muddy facies subdivides in centennial intervals of relative faster and slower accumulation. For such intervals, sedimentation rates are produced that deviate 10 to 20% from that in simpler stepped linear age-models. For irregularly laminated muddy intervals of the oxbow fill - from which meaningful sampling for radiocarbon dating is more difficult than from peaty or slowly accumulating organic lake sediments - supplementing spotty radiocarbon sampling with continuous sedimentary proxy data creates more realistic age-depth modelling results.

Shallow marine event sedimentation in a volcanic arc-related setting: The Ordovician Suri Formation, Famatina range, northwest Argentina

USGS Publications Warehouse

Mangano, M.G.; Buatois, L.A.

1996-01-01

The Loma del Kilome??tro Member of the Lower Ordovician Suri Formation records arc-related shelf sedimentation in the Famatina Basin of northwest Argentina. Nine facies, grouped into three facies assemblages, are recognized. Facies assemblage 1 [massive and parallel-laminated mudstones (facies A) locally punctuated by normally graded or parallel-laminated silty sandstones (facies B] records deposition from suspension fall-out and episodic storm-induced turbidity currents in an outer shelf setting. Facies assemblage 2 [massive and parallel-laminated mudstones (facies A) interbedded with rippled-top very fine-grained sandstones (facies D)] is interpreted as the product of background sedimentation alternating with distal storm events in a middle shelf environment. Facies assemblage 3 [normally graded coarse to fine-grained sandstones (facies C); parallel-laminated to low angle cross-stratified sandstones (facies E); hummocky cross-stratified sandstones and siltstones (facies F); interstratified fine-grained sandstones and mudstones (facies G); massive muddy siltstones and sandstones (facies H); tuffaceous sandstones (facies I); and interbedded thin units of massive and parallel-laminated mudstones (facies A)] is thought to represent volcaniclastic mass flow and storm deposition coupled with subordinated suspension fall-out in an inner-shelf to lower-shoreface setting. The Loma del Kilo??metro Member records regressive-transgressive sedimentation in a storm- and mass flow-dominated high-gradient shelf. Volcano-tectonic activity was the important control on shelf morphology, while relative sea-level change influenced sedimentation. The lower part of the succession is attributed to mud blanketing during high stand and volcanic quiescence. Progradation of the inner shelf to lower shoreface facies assemblage in the middle part represents an abrupt basinward shoreline migration. An erosive-based, non-volcaniclastic, turbidite unit at the base of this package suggests a sea level fall. Pyroclastic detritus, andesites, and a non-volcanic terrain were eroded and their detritus was transported basinward and redeposited by sediment gravity flows during the low stand. The local coexistence of juvenile pyroclastic detritus and fossils suggests reworking of rare ash-falls. The upper part of the Loma del Kilo??metre Member records a transgression with no evidence of contemporaneous volcanism. Biostratinomic, paleoecologic, and ichnologic analyses support this paleoenvironmental interpretations and provide independent evidence for the dominance of episodic sedimentation in an arc-related shallow marine setting. Fossil concentrations were mainly formed by event processes, such as storms and volcaniclastic mass flows. High depositional rates inhibited formation of sediment-starved biogenic concentrations. Collectively, trace fossils belong to the Cruziana ichnofacies. Low diversity, scarcity, and presence of relatively simple forms indicate benthic activity under stressful conditions, most probably linked to high sedimentation rates. Contrasting sedimentary dynamics between 'normal shelves' and their volcaniclastic counterparts produce distinct and particular signatures in the stratigraphic record. Arc-related shelves are typified by event deposition with significant participation of sediment gravity flows, relatively high sedimentation rates, textural and mineralogical immaturity of sediments, scarcity and low diversity of trace fossils, and dominance of transported and reworked faunal assemblages genetically related to episodic processes.

Growth pattern research on the modern deposition of Ganjiang delta in Poyang lake basin by spatio-temporal remote sensing images

NASA Astrophysics Data System (ADS)

Zhou, Hongying; Yuan, Xuanjun; Zhang, Youyan; Dong, Wentong; Liu, Song

2016-11-01

It is of great importance for petroleum exploration to study the sedimentary features and the growth pattern of shoal water deltas in lake basins. Taking spatio-temporal remote sensing images as the principal data source, combined with field sedimentation survey, a quantitative research on the modern deposition of Ganjiang delta in the Poyang Lake Basin is described in this paper. Using 76 multi-temporal and multi-type remote sensing images acquired from 1973 to 2015, combined with field sedimentation survey, remote sensing interpretation analysis was conducted on the sedimentary facies of the Ganjiang delta. It is found that that the current Poyang Lake mainly consists of three types of sand body deposits including deltaic deposit, overflow channel deposit, and aeolian deposit, and the distribution of sand bodies was affected by the above three types of depositions jointly. The mid-branch channels of the Ganjiang delta increased on an exponential growth rhythm. The main growth pattern of the Ganjiang delta is dendritic and reticular, and the distributary channel mostly arborizes at lake inlet and was reworked to be reticulatus at late stage.

What controls diffuse fractures in platform carbonates? Insights from Provence (France) and Apulia (Italy)

NASA Astrophysics Data System (ADS)

Lavenu, Arthur P. C.; Lamarche, Juliette

2018-03-01

Fractures are widespread in rocks and regional opening-mode arrays are commonly ascribed to major tectonic events. However, fractures occur in otherwise undeformed rocks. Some of these are early-developed features independent of tectonics and forming a background network at regional scale. To overcome this lack of understanding, two hydrocarbon reservoir analogues from platform carbonates have been targeted: the Provence (SE France), and the Apulian platform (SE Italy). In both areas, an early fracturing stage has been observed, made of high-angle-to-bedding opening-mode fractures, and bed-parallel stylolites. These features developed synchronously during the first burial stages and prior to major tectonic events. The fracture sets are not genetically related to the present-day layering. Contrarily, fractures developed in a brittle media where facies transitions were not sharp and did not act as mechanical discontinuities. Carbonate facies distribution and early diagenetic imprint constrained the mechanical stratigraphy when fractures occurred. In addition, we observed that fractures related to late tectonic inversion were partly inhibited. Indeed, rock mechanical properties change through time. Characterizing the temporal evolution of carbonate rocks has revealed that diagenesis and sedimentary facies are the prime actors for brittleness and mechanical layering in carbonates.

The chronostratigraphic framework of the South-Pyrenean Maastrichtian succession reappraised: Implications for basin development and end-Cretaceous dinosaur faunal turnover

NASA Astrophysics Data System (ADS)

Fondevilla, Víctor; Dinarès-Turell, Jaume; Oms, Oriol

2016-05-01

The evolution of the end-Cretaceous terrestrial ecosystems and faunas outside of North America is largely restricted to the European Archipelago. The information scattered in this last area can only be integrated in a chronostratigraphic framework on the basis of robust age constraints and stratigraphy. Therefore, we have revisited the puzzling age calibration of the sedimentary infilling from the Isona sector in the Tremp syncline (South-Central Pyrenees), an area renowned for its rich Maastrichtian dinosaur fossil record. Aiming to shed light to existing controversial age determinations, we carried out a new magnetostratigraphic study along the ~ 420 m long Orcau and Nerets sections of that area. Our results reveal that most of the succession correlates to the early Maastrichtian (mostly chron C31r) in accordance to ages proposed by recent planktonic foraminifera biostratigraphy. The resulting chronostratigraphic framework of the entire Maastrichtian basin recorded in the Tremp syncline shows that a significant sedimentary hiatus of about 3 My characterizes most of the late Maastrichtian in the study area. This hiatus, related to an abrupt migration of the basin depocenter, is temporally close to similar hiatuses, decreases in sedimentary rates and facies shifts recorded in other southwestern European areas. The present chronologic framework sets the basis for a thorough assessment of end-Cretaceous terrestrial faunal turnover and extinction patterns, and the establishment of a more rigorous Pyrenean basin evolution analysis.

Morphology and modern sedimentary deposits of the macrotidal Marapanim Estuary (Amazon, Brazil)

NASA Astrophysics Data System (ADS)

Araújo da Silva, Cléa; Souza-Filho, Pedro Walfir M.; Rodrigues, Suzan W. P.

2009-03-01

The northern Brazilian coast, east of the Amazon River is characterized by several macrotidal estuarine systems that harbor large mangrove areas with approximately 7600 km 2. The Marapanim Estuary is influenced by macrotidal regime with moderate waves influence. Morphologic units were investigated by using remote sensing images (i.e., Landsat-7 ETM+, RADARSAT- 1 Wide and SRTM) integrated with bathymetric data. The modern sedimentary deposits were analyzed from 67 cores collected by Vibracore and Rammkersonde systems. Analysis of morphology and surface sedimentary deposits of the Marapanim River reveal they are strongly influenced by the interaction of tidal, wave and fluvial currents. Based on these processes it was possible to recognize three distinct longitudinal facies zonation that revels the geological filling of a macrotidal estuary. The estuary mouth contain fine to medium marine sands strongly influenced by waves and tides, responsible for macrotidal sandy beaches and estuarine channel development, which are characterized by wave-ripple bedding and longitudinal cross-bedding sands. The estuary funnel is mainly influenced by tides that form wide tidal mudflats, colonized by mangroves, along the estuarine margin, with parallel laminations, lenticular bedding, root fragments and organic matter lenses. The upstream estuary contains coarse sand to gravel of fluvial origin. Massive mud with organic matter lenses, marks and roots fragments occur in the floodplain accumulates during seasonal flooding providing a slowly aggrading in the alluvial plain. This morphologic and depositional pattern show easily a tripartite zonation of a macrotidal estuary, that are in the final stage of filling.

Cyanobacterial diversity and related sedimentary facies as a function of water flow conditions: Example from the Monasterio de Piedra Natural Park (Spain)

NASA Astrophysics Data System (ADS)

Berrendero, Esther; Arenas, Concha; Mateo, Pilar; Jones, Brian

2016-05-01

The River Piedra in the Monasterio de Piedra Natural Park (NE Spain) is a modern tufa-depositing river that encompasses various depositional environments that are inhabited by different cyanobacterial populations. Molecular (16S rDNA) and morphological analyses of the cyanobacteria from different facies showed that Phormidium incrustatum dominates in the fast-flowing water areas where the mean depositional rate is 1.6 cm/year. Stromatolites in these areas are formed of palisades of hollow calcite tubes (inner diameter of 6.0-7.5 μm, walls 2-12 μm thick) that formed through calcite encrustation around the filaments followed by decay of the trichomes. In contrast, in slow-flowing water areas with lower depositional rates (mean depositional rate of 0.3 cm/year), Phormidium aerugineo-caeruleum is the dominant species. In these areas, randomly oriented calcite tubes (inner diameter of 5-6 μm, walls 3-8 μm thick) formed by calcite encrustation, are found in thin and uneven laminae and as scattered tubes in the loose lime mud and sand-sized carbonate sediment. Although this species did not build laminated deposits, it gave cohesiveness to the loose sediment. In the stepped and low waterfalls, with intermediate deposition rates (mean depositional rate of 0.9 cm/year), both species of Phormidium are found in association with spongy moss and algal boundstones, which is consistent with the variable flow conditions in this setting. The calcite encrustations on the cyanobacteria from different environments exhibit irregular patterns that may be linked to changes in the calcite saturation index. The physicochemical conditions associated with extracellular polymeric substances may be more significant to CaCO3 precipitation in microbial mats in slow-flowing water conditions than in fast-flowing water conditions. These results show that flow conditions may influence the distribution of different cyanobacteria that, in turn, leads to the development of different sedimentary facies and structures in fluvial carbonate systems.

Aeromagnetic map and interpretation of geophysical data from the Condrey Mountain Roadless Area, Siskiyou County, California

USGS Publications Warehouse

Jachens, R.C.; Elder, W.P.

1983-01-01

The western Paleozoic and Triassic belt that nearly surrounds the Condrey Mountain Schist is a melange of sedimentary, volcanic, and ultramafic rocks metamorphosed to amphibolite facies (Coleman and others, 1983). Only two samples of the metamorphic melange were collected near the Condrcy Mountain Road less Area, but extensive sampling of this unit southwest of the roadless area yielded an average sample density of 2.86±0.15 g/cm3 (112 samples) (Jachens and others, 1983).

The Middle Miocene of the Fore-Carpathian Basin (Poland, Ukraine and Moldova)

NASA Astrophysics Data System (ADS)

Wysocka, Anna; Radwański, Andrzej; Górka, Marcin; Bąbel, Maciej; Radwańska, Urszula; Złotnik, Michał

2016-09-01

Studies of Miocene sediments in the Fore-Carpathian Basin, conducted by geologists from the University of Warsaw have provided new insights on the distribution of the facies infilling the basin, particularly in the forebulge and back-bulge zones. The origin of the large-scale sand bodies, evaporitic deposits and large-scale organic buildups is discussed, described and verified. These deposits originated in variable, shallow marine settings, differing in their water chemistry and the dynamics of sedimentary processes, and are unique with regard to the fossil assemblages they yield. Many years of taxonomic, biostratigraphic, palaeoecologic and ecotaphonomic investigations have resulted in the identification of the fossil assemblages of these sediments, their age, sedimentary settings and post-mortem conditions. Detailed studies were focused on corals, polychaetes, most classes of molluscs, crustaceans, echinoderms, and fishes.

Variations in fluvial deposition on an alluvial plain: an example from the Tongue River Member of the Fort Union Formation (Paleocene), southeastern Powder River Basin, Wyoming, U.S.A.

USGS Publications Warehouse

Johnson, E.A.; Pierce, F.W.

1990-01-01

The Tongue River Member of the Paleocene Fort Union Formation is an important coal-bearing sedimentary unit in the Powder River Basin of Wyoming and Montana. We studied the depositional environments of a portion of this member at three sites 20 km apart in the southeastern part of the basin. Six lithofacies are recognized that we assign to five depositional facies categorized as either channel or interchannel-wetlands environments. (1) Type A sandstone is cross stratified and occurs as lenticular bodies with concave-upward basal surfaces; these bodies are assigned to the channel facies interpreted to be the product of low-sinuosity streams. (2) Type B sandstone occurs in parallel-bedded units containing mudrock partings and fossil plant debris; these units constitute the levee facies. (3) Type C sandstone typically lacks internal structure and occurs as tabular bodies separating finer grained deposits; these bodies represent the crevasse-splay facies. (4) Gray mudrock is generally nonlaminated and contains ironstone concretions; these deposits constitute the floodplain facies. (5) Carbonaceous shale and coal are assigned to the swamp facies. We recognize two styles of stream deposition in our study area. Laterally continuous complexes of single and multistoried channel bodies occur at our middle study site and we interpret these to be the deposits of sandy braided stream systems. In the two adjacent study sites, single and multistoried channel bodies are isolated in a matrix of finer-grained interchannel sediment suggesting deposition by anastomosed streams. A depositional model for our study area contains northwest-trending braided stream systems. Avulsions of these systems created anastomosed streams that flowed into adjacent interchannel areas. We propose that during late Paleocene a broad alluvial plain existed on the southeastern flank of the Powder River Basin. The braided streams that crossed this surface were tributaries to a northward-flowing, basin-axis trunk stream that existed to the west. ?? 1990.

Mesozoic lacustrine system in the Parnaíba Basin, northeastern Brazil: Paleogeographic implications for west Gondwana

NASA Astrophysics Data System (ADS)

Cardoso, Alexandre Ribeiro; Nogueira, Afonso César Rodrigues; Abrantes, Francisco Romério; Rabelo, Cleber Eduardo Neri

2017-03-01

The fragmentation of the West Gondwana during Early Triassic to Cretaceous was marked by intense climatic changes, concomitant with the establishment of extensive desertic/lacustrine systems. These deposits succeeded the emplacement and extrusion of lava flows, related to the pre-rift phase and initial opening of the Equatorial Atlantic Ocean. The thermal phase is recorded in the Upper Jurassic-Lower Cretaceous Pastos Bons Formation, exposed mainly in southeast parts of the Parnaíba Basin, Northeastern Brazil. The sedimentary facies of this unit were grouped in two facies associations (FA), representative of a shallow lacustrine system, influenced by episodic hyperpycnal and oscillatory flows. Central lake facies association (FA1) is composed by laminated mudstone (Ml), sandstone/mudstone rhythmite (S/Mr) and sandstone with even-parallel lamination (Sel). Flysch-like delta front (FA2) consists in sandstones with wave structures (Sw), sandstones with even-parallel stratification (Ses), massive sandstones (Sm), sandstones with soft-sediment deformation structures (Sd) and laminated mudstones (Ml). FA1 was deposited in the deepest portions of the lake, characterized by low energy, episodically disturbed by siliciclastic influx. FA2 presents sandy deposits generated by unconfined flow, probably fed by ephemeral stream flows that generated thickening upward of tabular sandstone beds. The progressive filling of the lake resulted in recurrent shoaling up of the water level and reworking by wave action. The installation of Pastos Bons lakes was controlled by thermal subsidence, mainly in restricted depocenters. The siliciclastic fluvial inflow can be related to the adjacent humid desertic facies, formed under climatic attenuation, typical of post-Triassic period, with reduced biological activity. Smectite and abundant feldspars, in lacustrine facies, corroborate an arid climate, with incipient chemical weathering. The new facies and stratigraphic data present in this paper provide an explanation about the implantation of a huge lacustrine system in the southern of Parnaiba Basin, with strong paleogeographic implications for the West-Central Gondwana during Late Jurassic to Early Cretaceous.

Facies-controlled fluid migration patterns and subsequent reservoir collapse by depressurization - the Entrada Sandstone, Utah

NASA Astrophysics Data System (ADS)

Sundal, A.; Skurtveit, E.; Midtkandal, I.; Hope, I.; Larsen, E.; Kristensen, R. S.; Braathen, A.

2016-12-01

The thick and laterally extensive Middle Jurassic Entrada Sandstone forms a regionally significant reservoir both in the subsurface and as outcrops in Utah. Individual layers of fluvial sandstone within otherwise fine-grained aeolian dunes and silty inter-dune deposits of the Entrada Earthy Member are of particular interest as CO2 reservoir analogs to study injectivity, reservoir-caprock interaction and bypass systems. Detailed mapping of facies and deformation structures, including petrographic studies and core plug tests, show significant rock property contrasts between layers of different sedimentary facies. Beds representing fluvial facies appear as white, medium-grained, well-sorted and cross-stratified sandstone, displaying high porosity, high micro-scale permeability, low tensile strength, and low seismic velocity. Subsequent to deposition, these beds were structurally deformed and contain a dense network of deformation bands, especially in proximity to faults and injectites. Over- and underlying low-permeability layers of inter-dune aeolian facies contain none or few deformation bands, display significantly higher rock strengths and high seismic velocities compared to the fluvial inter-beds. Permeable units between low-permeability layers are prone to become over-pressured during burial, and the establishment of fluid escape routes during regional tectonic events may have caused depressurization and selective collapse of weak layers. Through-cutting, vertical sand pipes display large clasts of stratified sandstone suspended in remobilized sand matrix, and may have served as permeable fluid conduits and pressure vents before becoming preferentially cemented and plugged. Bleached zones around faults and fractures throughout the succession indicate leakage and migration of reducing fluids. The fluvial beds are porous and would appear in wireline logs and seismic profiles as excellent reservoirs; whereas due to dense populations of deformation bands they may in fact display reduced horizontal and vertical permeability locally. Facies-related differences in geomechanical properties, pressure distribution and selective structural collapse have significant implications for injectivity and reservoir behavior.

Larger benthic foraminifera of the Paleogene Promina Beds (Croatia)

NASA Astrophysics Data System (ADS)

Cosovic, V.; Mrinjek, E.; Drobne, K.

2012-04-01

In order to add more information about complex origin of Promina Beds (traditionally interpreted as Paleogene molasse of Dinarides), two sections (Lišani Ostrovački and Ostrovica, Central Dalmatia, Croatia) have been studied in detail. Sampled carbonate sequences contain predominantly coralline red algae, larger benthic foraminifera and corals. Based on sedimentary textures, nummulitid (Nummulites s.str and Asterigerina sp.) test shapes and the associated skeletal components, altogether three types of the Middle Eocene (Lutetian to Bartonian) facies were recognized. The Ostrovica section is composed of alternating couples of marly limestones and marls, several decimeters thick with great lateral continuity. Two facies which vertically alternate are recognized as Nummulites - Asterigerina facies, where patchily dispersed large, robust and party reworked larger benthic foraminifera constitute 20% and small bioclasts (fomaniniferal fragments and whole tests less than 3 mm in diameters) 10% of rock volume and, Coral - Red algal facies with coral fragments of solitary and colonial taxa up to 1 cm in size constitute 5 - 40%, red algae 15 - 60% and lager benthic foraminifera up to 5% of rock volume. The textural and compositional differences among the facies suggest rhythmic exchanges of conditions that characterize shallower part of the mesophotic zone with abundant nummulithoclasts with deeper mesophotic, lime mud-dominated settings where nummulitids with the flat tests, coralline red algae and scleractinian corals are common. The scleractinian corals (comprising up to 20% of rock volume) encrusted by foraminifera (Acervulina, Haddonia and nubeculariids) or coralline red algae and foraminiferal assemblage made of orthophragminid and nummulitid tests scattered in matrix, are distributed uniformly throughout the studied Lišani Ostrovački section. In the central part of section, wavy to smooth thin (< 1 mm) crusts (laminas) alternating with encrusted corals occur. The characteristics of associated fauna and spatial relationship between corals and laminations indicate that this facies originated in a mid-ramp (shelf) setting.

Sedimentary facies and depositional history of the Swan Islands, Honduras

NASA Astrophysics Data System (ADS)

Ivey, Marvin L.; Breyer, John A.; Britton, Joseph C.

1980-10-01

Swan Island is a Honduran possession in the western Caribbean, located on the southeastern side of the Cayman Trench. Two sedimentary assemblages are found on the island: an older bedded sequence of mid-Tertiary age (Aquitanian or Burdigalian) and a younger sedimentary sequence of Late Pleistocene age. The older sequence is composed of a series of calcarenites, calcilutites, and siliciclastic mudstones; capping these are cliff-forming reefal carbonates of the younger sequence. The rocks of the older bedded sequence accumulated in deep water. Sedimentation consisted of a constant rain of pyroclastic debris interrupted by the episodic introduction of upslope carbonate material by turbidity currents. Uplift and deformation of this sequence was initiated sometime after the Early Miocene. By the Late Pleistocene, uplift had brought the rocks into water depths conducive to coral growth. Pleistocene sedimentation on the island was controlled by the interaction between tectonic uplift and eustatic sea-level changes. The primary controlling force on the tectonic history of the island is its proximity to the boundary between the North American and Caribbean plates.

Lower Badenian coarse-grained Gilbert deltas in the southern margin of the Western Carpathian Foredeep basin

NASA Astrophysics Data System (ADS)

Nehyba, Slavomír

2018-02-01

Two coarse-grained Gilbert-type deltas in the Lower Badenian deposits along the southern margin of the Western Carpathian Foredeep (peripheral foreland basin) were newly interpreted. Facies characterizing a range of depositional processes are assigned to four facies associations — topset, foreset, bottomset and offshore marine pelagic deposits. The evidence of Gilbert deltas within open marine deposits reflects the formation of a basin with relatively steep margins connected with a relative sea level fall, erosion and incision. Formation, progradation and aggradation of the thick coarse-grained Gilbert delta piles generally indicate a dramatic increase of sediment supply from the hinterland, followed by both relatively continuous sediment delivery and an increase in accommodation space. Deltaic deposition is terminated by relatively rapid and extended drowning and is explained as a transgressive event. The lower Gilbert delta was significantly larger, more areally extended and reveals a more complicated stratigraphic architecture than the upper one. Its basal surface represents a sequence boundary and occurs around the Karpatian/Badenian stratigraphic limit. Two coeval deltaic branches were recognized in the lower delta with partly different stratigraphic arrangements. This different stratigraphic architecture is mostly explained by variations in the sediment delivery and /or predisposed paleotopography and paleobathymetry of the basin floor. The upper delta was recognized only in a restricted area. Its basal surface represents a sequence boundary probably reflecting a higher order cycle of a relative sea level rise and fall within the Lower Badenian. Evidence of two laterally and stratigraphically separated coarse-grained Gilbert deltas indicates two regional/basin wide transgressive/regressive cycles, but not necessarily of the same order. Provenance analysis reveals similar sources of both deltas. Several partial source areas were identified (Mesozoic carbonates of the Northern Calcareous Alps and the Western Carpathians, crystalline rocks of the eastern margin of the Bohemian Massif, older sedimentary infill of the Carpathian Foredeep and/or the North Alpine Foreland Basin, sedimentary rocks of the Western Carpathian/Alpine Flysch Zone).

Geothermal energy from the Pannonian Basins System: An outcrop analogue study of exploration target horizons in Hungary

NASA Astrophysics Data System (ADS)

Götz, Annette E.; Sass, Ingo; Török, Ákos

2015-04-01

The characterization of geothermal reservoirs of deep sedimentary basins is supported by outcrop analogue studies since reservoir characteristics are strongly related to the sedimentary facies and thus influence the basic direction of geothermal field development and applied technology (Sass & Götz, 2012). Petro- and thermophysical rock properties are key parameters in geothermal reservoir characterization and the data gained from outcrop samples serve to understand the reservoir system. New data from the Meso- and Cenozoic sedimentary rocks of Budapest include carbonates and siliciclastics of Triassic, Eocene, Oligocene and Miocene age, exposed on the western side of the river Danube in the Buda Hills (Götz et al., 2014). Field and laboratory analyses revealed distinct horizons of different geothermal potential and thus, enable to identify and interpret corresponding exploration target horizons in geothermal prone depths in the Budapest region as well as in the Hungarian sub-basins of the Pannonian Basins System (Zala and Danube basins, Great Plain) exhibiting geothermal anomalies. References Götz, A.E., Török, Á., Sass, I., 2014. Geothermal reservoir characteristics of Meso- and Cenozoic sedimentary rocks of Budapest (Hungary). German Journal of Geosciences, 165, 487-493. Sass, I., Götz, A.E., 2012. Geothermal reservoir characterization: a thermofacies concept. Terra Nova, 24, 142-147.

Response of Late Cretaceous migrating deltaic facies systems to sea level, tectonics, and sediment supply changes, New Jersey Coastal Plain, U.S.A.

USGS Publications Warehouse

Kulpecz, A.A.; Miller, K.G.; Sugarman, P.J.; Browning, J.V.

2008-01-01

Paleogeographic, isopach, and deltaic lithofacies mapping of thirteen depositional sequences establish a 35 myr high resolution (> 1 Myr) record of Late Cretaceous wave- and tide-influenced deltaic sedimentation. We integrate sequences defined on the basis of lithologic, biostratigraphic, and Sr-isotope stratigraphy from cores with geophysical log data from 28 wells to further develop and extend methods and calibrations of well-log recognition of sequences and facies variations. This study reveals the northeastward migration of depocenters from the Cenomanian (ca. 98 Ma) through the earliest Danian (ca. 64 Ma) and documents five primary phases of paleodeltaic evolution in response to long-term eustatic changes, variations in sediment supply, the location of two long-lived fluvial axes, and thermoflexural basement subsidence: (1) Cenomanian-early Turonian deltaic facies exhibit marine and nonmarine facies and are concentrated in the central coastal plain; (2) high sediment rates, low sea level, and high accommodation rates in the northern coastal plain resulted in thick, marginal to nonmarine mixed-influenced deltaic facies during the Turonign-Coniacian; (3) comparatively low sediment rates and high long-term sea level in the Santonian resulted in a sediment-starved margin with low deltaic influence; (4) well-developed Campanian deltaic sequences expand to the north and exhibit wave reworking and longshore transport of sands, and (5) low sedimentation rates and high long-term sea level during the Maastrichtian resulted in the deposition of a sediment-starved glauconitic shelf. Our study illustrates the widely known variability of mixed-influence deltaic systems, but also documents the relative stability of deltaic facies systems on the 106-107 yr scale, with long periods of cyclically repeating systems tracts controlled by eustasy. Results from the Late Cretaceous further show that although eustasy provides the template for sequences globally, regional tectonics (rates of subsidence and accommodation), changes in sediment supply, proximity to sediment input, and flexural subsidence from depocenter loading determines the regional to local preservation and facies expression of sequences. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Integrated Ground-based Hyperspectral Imaging and Geochemical Study of the Eagle Ford Group in West Texas

NASA Astrophysics Data System (ADS)

Sun, L.; Khan, S.; Godet, A.

2017-12-01

This study used ground-based hyperspectral imaging to map an outcrop of the Eagle Ford Group in west Texas. The Eagle Ford Group consists of alternating layers of mudstone - wackestone, grainstone - packstone facies and volcanic ash deposits with high total organic carbon content deposited during the Late Cenomanian - Turonian time period. It is one of the few unconventional source rock and reservoirs that have surface representations. Ground-based hyperspectral imaging scanned an outcrop and hand samples at close ranges with very fine spatial resolution (centimeter to sub-millimeter). Spectral absorption modeling of clay minerals and calcite with the modified Gaussian model (MGM) allowed quantification of variations of mineral abundances. Petrographic analysis confirmed mineral identifications and shed light on sedimentary textures. Major element geochemistry confirmed the mineral quantification. Enrichment of molybdenum (Mo) and uranium (U) indicated "unrestricted marine" paleo-hydrogeology and anoxic to euxinic paleo-redox bottom water conditions. Mineral quantification resulted in mapping of mudstone - wackestone, grainstone - packstone facies and claystones (volcanic ash beds). The lack of spatial associations between the grainstones and claystones on the outcrop calls into question the hypothesis that the primary productivity is controlled by iron availability from volcanic ash beds. Hyperspectral remote sensing data also helped in creating a virtual outcrop model with detailed mineralogical compositions, and provided reservoir analog to extract compositional and geo-mechanical characteristics and variations. The utilization of these new techniques in geo-statistical analysis provides a workflow for employing remote sensing in resource exploration and exploitation.

Integrated ground-based hyperspectral imaging and geochemical study of the Eagle Ford Group in West Texas

NASA Astrophysics Data System (ADS)

Sun, Lei; Khan, Shuhab; Godet, Alexis

2018-01-01

This study used ground-based hyperspectral imaging to map an outcrop of the Eagle Ford Group in west Texas. The Eagle Ford Group consists of alternating layers of mudstone - wackestone, grainstone - packstone facies and volcanic ash deposits with high total organic content deposited during the Cenomanian - Turonian time period. It is one of the few unconventional source rock and reservoirs that have surface representations. Ground-based hyperspectral imaging scanned an outcrop and hand samples at close ranges with very fine spatial resolution (centimeter to sub-millimeter). Spectral absorption modeling of clay minerals and calcite with the modified Gaussian model (MGM) allowed quantification of variations of mineral abundances. Petrographic analysis confirmed mineral identifications and shed light on sedimentary textures, and major element geochemistry supported the mineral quantification. Mineral quantification resulted in mapping of mudstone - wackestone, grainstone - packstone facies and bentonites (volcanic ash beds). The lack of spatial associations between the grainstones and bentonites on the outcrop calls into question the hypothesis that the primary productivity is controlled by iron availability from volcanic ash beds. Enrichment of molybdenum (Mo) and uranium (U) indicated "unrestricted marine" paleo-hydrogeology and anoxic to euxinic paleo-redox bottom water conditions. Hyperspectral remote sensing data also helped in creating a virtual outcrop model with detailed mineralogical compositions, and provided reservoir analog to extract compositional and geo-mechanical characteristics and variations. The utilization of these new techniques in geo-statistical analysis provides a workflow for employing remote sensing in resource exploration and exploitation.

Neogene marine sedimentary record of the Gulf of Alaska: from the glaciers to the distal submarine fan systems

NASA Astrophysics Data System (ADS)

Ridgway, K. D.; Bahlburg, H.; Childress, L. B.; Cowan, E. A.; Forwick, M.; Moy, C. M.; Müller, J.; Ribeiro, F.; Gupta, S.; Gulick, S. P.; Jaeger, J. M.

2013-12-01

The marine sedimentary record of Miocene to Pleistocene tectonics and glaciation is well preserved along the southern Alaska convergent margin. This margin is well suited for linking proximal to distal sediment transport processes because sediment is being generated by glacial erosion in the highest coastal mountain range on earth and subsequently being transported to the Aleutian subduction zone. We will discuss the sedimentary record from two end members of this system: (1) the proximal marine record now exposed onshore in the high peaks of the coastal ranges, and (2) the offshore distal record preserved in the Surveyor submarine fan system that was cored during the 2013 IODP Expedition 341. Onshore the Miocene non-glacial strata are represented by the Poul Creek Fm. This unit is 2000 m thick and in its upper part consists of mudstone, thin sandstone beds (10-30 cm thick), and thick bedded (1-2 m) highly bioturbated green sandstone beds that contain hummocky stratification. We interpret this unit as being deposited mainly in marine shelf environments. A gradational contact between the Poul Creek and the overlying upper Miocene-Pleistocene Yakataga Formation is marked by a transition to mudstone, thick bedded sandstone and glacial diamictite. This transition to glacial dominated deposition is interpreted to have occurred around 5 Ma based on previous studies. The onshore glacimarine strata are 5 km thick and grade up section from submarine fan to marine shelf strata. In the distal submarine fan record at IODP Site U1417, the upper Miocene strata in the lower part of the Site consist of 340 m of highly bioturbated gray to green mud interbedded with coarse sand and sandy diamict. These coarse-grained units are lithic rich with mainly sedimentary, volcanic, and coal clasts. We interpret these units as being derived from coal-bearing sedimentary strata exposed in the onshore thrust belt. These facies are interbedded with diatom ooze; we interpret this combination of facies as representing deposition of coarse-grained detritus originating from sedimentary gravity flows followed by longer periods of hemipelagic deposition. The first clear record of glacial sediment input in the distal submarine fan environment is late Pliocene - early Pleistocene muddy diamict beds that probably are the products of ice-rafting. This unit is about 30 m in thickness. The overlying 260 m of the core are mainly dark gray mud with thin beds of volcanic ash and sand/silt beds. Lonestones are common and are mainly argillite and metasiltstone clasts suggesting at least a component of sediment derivation from onshore metamorphosed parts of the Mesozoic accretionary prism. In general, the overall Neogene sedimentary record in both the proximal and distal marine settings appears to be similar but requires a sediment link between the proximal strata deposited on the Yakutat microplate and the Surveyor fan system deposited on the Pacific Plate.

Stratigraphy, sedimentology and eruptive mechanism of the El Golfo phreatomagmatic edifice (Lanzarote, Canary Islands)

NASA Astrophysics Data System (ADS)

Pedrazzi, D.; Marti, J.; Geyer, A.

2012-04-01

The El Golfo tuff cone is an example of phreatomagmatic edifice, developed in the western coast of Lanzarote (Canary Islands). El Golfo, together with other edifices of the same age, is aligned along a fracture oriented NEE-SWW coinciding with the main lineation of the historic volcanism in this part of the island. In this contribution we present a detailed stratigraphic study of the succession of deposits and we interpret them in terms of depositional processes and eruptive dynamics. The eruptive sequence is exclusively represented by a succession of pyroclastic deposits, and we infer it according to variations in flow regime and the magma-water interaction. Several pyroclastic units were identified according to facies variations based on sedimentary discontinuities, grain size, components, variations in primary laminations and bedforms following the facies model proposed by Chough and Sohn (1990). The growth of the El Golfo tuff cone involved several stages based on variations in depositional processes. The edifice was constructed very rapidly around the vent controlling the amount of water that got access to the eruption conduit. Although the invariable phreatomagmatic character of most of the pyroclastic sequence, it is possible to deduce variations in the explosive energy, with a general increment upwards, according to the increase in the degree of fragmentation of pyroclasts, The absence of hyaloclastites, the nature of the palagonite alteration and the observed sedimentary structures, demonstrate the subaereal character of most of the deposits

Structural and sedimentary evolution of the Malay Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ismail, M.T.; Rudolph, K.W.; Abdullah, S.A.

1994-07-01

The Malay Basin is a back-arc basin that formed via Eocene ( ) through Oligocene extension. This early extensional episode is characterized by large east-west and northwest-southeast-trending normal fault systems with associated block rotation. Extensional subbasins are filled with a thick succession of alluvial and fluvial sediments that show increasing lacustrine influence toward the central basin dep. In the early Miocene, the basin entered a passive sag phase in which depositional relief decreased, and there is the first evidence of widespread marine influence. Lower Miocene sediments consist of cyclic offshore marine, tidal-estuarine, and coastal plain fluvial sediments with very widemore » facies tracts. The middle Miocene is dominated by increasing compressional inversion, in which preexisting extensional lows were folded into east-west anticlines. This compression continues well into the Pliocene-Pleistocene, especially in the northwest portion of the basin and is accompanied by an increase in basin-wide subsidence. There is significant thinning over the crest of the growing anticlines and an angular unconformity near the top of the middle Miocene in the southeast portion of the basin. Middle Miocene sedimentary facies are similar to those seen in the lower Miocene, but are influenced by the contemporaneous compressional folding and normal faulting. Based on this study, there is no evidence of through-going wrench-fault deformation in the Malay Basin. Instead, localized strike-slip faulting is a subsidiary phenomenon associated with the extensional and compressional tectonic episodes.« less

Geochemistry of host rocks in the Howards Pass district, Yukon-Northwest Territories, Canada: implications for sedimentary environments of Zn-Pb and phosphate mineralization

USGS Publications Warehouse

Slack, John F.; Falck, Hendrik; Kelley, Karen D.; Xue, Gabriel G.

2017-01-01

Detailed lithogeochemical data are reported here on early Paleozoic sedimentary rocks that host the large Howards Pass stratiform Zn-Pb deposits in Yukon-Northwest Territories. Redox-sensitive trace elements (Mo, Re, V, U) and Ce anomalies in members of the Duo Lake Formation record significant environmental changes. During the deposition of lower footwall units (Pyritic siliceous and Calcareous mudstone members), bottom waters were anoxic and sulphidic, respectively; these members formed in a marginal basin that may have become increasingly restricted with time. Relative to lower members, a major environmental change is proposed for deposition of the overlying Lower cherty mudstone member, which contains phosphorite beds up to ∼0.8 m thick in the upper part, near the base of the Zn-Pb deposits. The presence of these beds, together with models for modern phosphorite formation, suggests P input from an upwelling system and phosphorite deposition in an upper slope or outer shelf setting. The overlying Active mudstone member contains stratabound to stratiform Zn-Pb deposits within black mudstone and gray calcareous mudstone. Data for unmineralized black mudstone in this member indicate deposition under diverse redox conditions from suboxic to sulphidic. Especially distinctive in this member are uniformly low ratios of light to heavy rare earth elements that are unique within the Duo Lake Formation, attributed here to the dissolution of sedimentary apatite by downward-percolating acidic metalliferous brines. Strata that overlie the Active member (Upper siliceous mudstone member) consist mainly of black mudstone with thin (0.5–1.5 cm) laminae of fine-grained apatite, recording continued deposition on an upper slope or outer shelf under predominantly suboxic bottom waters. Results of this study suggest that exploration for similar stratiform sediment-hosted Zn-Pb deposits should include the outer parts of ancient continental margins, especially at and near stratigraphic transitions from marginal basin facies to overlying slope or shelf facies.

Sedimentary processes in the Carnot Formation (Central African Republic) related to the palaeogeographic framework of Central Africa

NASA Astrophysics Data System (ADS)

Censier, Claude; Lang, Jacques

1999-08-01

The depositional environment, provenance and processes of emplacement of the detrital material of the Mesozoic Carnot Formation are defined, by bedding and sedimentological analysis of its main facies, and are reconstructed within the palaeogeographic framework of Central Africa. The clastic material was laid down between probably the Albian and the end of the Cretaceous, in a NNW-oriented braided stream fluvial system that drained into the Doba Trough (Chad) and probably also into the Touboro Basin (Cameroon). The material was derived from weathering of the underlying Devonian-Carboniferous Mambéré Glacial Formation and of the Precambrian schist-quartzite complex located to the south of the Carnot Formation. These results provide useful indications as to the provenance of diamonds mined in the southwest Central African Republic.

Tidal-bundle sequences in the Jordan Sandstone (Upper Cambrian), southeastern Minnesota, U.S.A.: Evidence for tides along inboard shorelines of the Sauk Epicontinental Sea

USGS Publications Warehouse

Tape, C.H.; Cowan, Clinton A.; Runkel, Anthony C.

2003-01-01

This study documents for the first time tidal bundling in a lower Paleozoic sheet sandstone from the cratonic interior of North America, providing insights into the hydrodynamics of ancient epicontinental seas. The Jordan Sandstone (Upper Cambrian) in the Upper Mississippi Valley contains large-scale planar tabular cross-sets with tidal-bundle sequences, which were analyzed in detail at an exceptional exposure. Tidal-bundle sequences (neap-spring-neap cycles) were delineated by foreset thickening-thinning patterns and composite shale drapes, the latter of which represent accumulations of mud during the neap tides of neap-spring-neap tidal cycles. Fourier analysis of the bundle thickness data from the 26 measurable bundle sequences revealed cycles ranging from 15 to 34 bundles per sequence, which suggests a semidiurnal or mixed tidal system along this part of the Late Cambrian shoreline. We extend the tidal interpretation to widespread occurrences of the same facies in outcrops of lesser quality, where the facies is recognizable but too few bundles are exposed for tidal cycles to be measured. By doing so, this study shows that tidally generated deposits have a significant geographic and temporal extent in Upper Cambrian strata of central mid-continent North America. The deposition and preservation of tidal facies was related to the intermittent development of shoreline embayments during transgressions. The tidally dominated deposits filled ravined topographies that were repeatedly developed on the updip parts of the shoreface. Resulting coastal geomorphologies, accompanied perhaps by larger-scale changes in basinal conditions and/or configuration, led to changes in depositional conditions from wave-dominated to tide-dominated. Outcrops of the Jordan Sandstone tidal facies in the Upper Mississippi Valley represent the farthest inboard recorded transmission of ocean-generated tides in the Laurentian epicontinental seas, demonstrating that tidal currents were significant agents in the transport of sand along the far cratonic interior shorelines of Cambrian North America. The results of this study improve the facies-level understanding of the genesis of sheet sandstones. Furthermore, tidalites documented here occur in a specific position within a sequence stratigraphic architecture for the Jordan Sandstone. This provides a framework to compare these ancient deposits and processes to younger (e.g., Carboniferous) epicontinental systems where stratal and sediment dynamics are better documented. ?? 2003, SEPM (Society for Sedimentary Geology).

Stratigraphy and sedimentology of the Cambrian base (La Herrería Formation) in the area of Los Barrios de Luna (N of Spain)

NASA Astrophysics Data System (ADS)

Florez Rodriguez, Adriana Georgina; Aramburu, Carlos; Toyos, Jose Maria

2017-04-01

La Herrería Formation comprises the base of the Cambrian in the Cantabrian Zone (ZC), the external part of the Variscan Orogen in the NW Iberian Peninsula (Spain). In other zones of the Iberian Massif, comparable stratigraphic formations are found overlying the Precambrian basement: La Herrería Formation lays with angular unconformity over the Narcea-Mora Formation. Previous studies have proposed a variety of interpretations for the Herrería Formation. Based on the identified facies and facies associations, in this study it is interpreted in terms of progradation and abandonment of a braidplain delta system, in agreement with some of the previous investigations. Due to its particular location within a foreland fold-and-thrust belt, the formation appears dismembered so that relatively distal sections are currently found displaced towards the NE. Through the analysis of previously investigated and newly identified outcrops, the present study aims to provide a better insight into the features of the sedimentary environment, as well as a detailed characterization of the entire formation, something that would facilitate its mapping in the complexly deformed study area. The study supports a previously proposed subdivision of the Herrería Formation in three informal members, and has identified a 5 m-thick level of fine-grained reddish and mica-rich sandstones proposed as the boundary between the lower and middle members, which has also been utilized as a marker bed for correlations among the different sections. The lower member is formed by shaly to sandy facies associations of pro-delta and delta front, and can include shallow-water carbonates deposited during delta lobe temporal abandonment. Within the middle member, the lower part is composed by coarse- to moderately-sorted feldspathic reddish sandstones of the delta plain, defining the top of a large-scale progradational sequence which starts at the lower member. Towards the upper part of this member, the sandstones turn into quartzarenites with glauconite, reflecting costal reworking by sea waves and then, the beginning of retrogradation. Finally, in the upper member, fine-grained-quarzarenites and shales are found, indicating a stronger marine influence interpreted as a consequence of a retrogradational trend that would culminate with the onset of carbonate deposition as shown by the limestones of the overlying Láncara Formation. Paleocurrent distribution analysis, based on cross-laminated sandstones, indicates that sedimentary supply was directed towards the SSW and that sediment redistribution occurred along a WNW-ESE trending paleoshore. Sedimentation would be linked to one of the graben basins created during the rifting that the northern margin of Gondwana was experiencing at that time.

Traces in the dark: sedimentary processes and facies gradients in the upper shale member of the Upper Devonian-Lower Mississippian Bakken Formation, Williston Basin, North Dakota, U.S.A.

USGS Publications Warehouse

Egenhoff, Sven O.; Fishman, Neil S.

2013-01-01

Black, organic-rich rocks of the upper shale member of the Upper Devonian–Lower Mississippian Bakken Formation, a world-class petroleum source rock in the Williston Basin of the United States and Canada, contain a diverse suite of mudstone lithofacies that were deposited in distinct facies belts. The succession consists of three discrete facies associations (FAs). These comprise: 1) siliceous mudstones; 2) quartz- and carbonate-bearing, laminated mudstones; and 3) macrofossil-debris-bearing massive mudstones. These FAs were deposited in three facies belts that reflect proximal to distal relationships in this mudstone system. The macrofossil-debris-bearing massive mudstones (FA 3) occur in the proximal facies belt and contain erosion surfaces, some with overlying conodont and phosphate–lithoclast lag deposits, mudstones with abundant millimeter-scale siltstone laminae showing irregular lateral thickness changes, and shell debris. In the medial facies belt, quartz- and carbonate-bearing, laminated mudstones dominate, exhibiting sub-millimeter-thick siltstone layers with variable lateral thicknesses and localized mudstone ripples. In the distal siliceous mudstone facies belt, radiolarites, radiolarian-bearing mudstones, and quartz- and carbonate-bearing, laminated mudstones dominate. Overall, total organic carbon (TOC) contents range between about 3 and 10 wt %, with a general proximal to distal decrease in TOC content. Abundant evidence of bioturbation exists in all FAs, and the lithological and TOC variations are paralleled by changes in burrowing style and trace-fossil abundance. While two horizontal traces and two types of fecal strings are recognized in the proximal facies belt, only a single horizontal trace fossil and one type of fecal string characterize mudstones in the distal facies belt. Radiolarites intercalated into the most distal mudstones are devoid of traces and fecal strings. Bedload transport processes, likely caused by storm-induced turbidity currents, were active across all facies belts. Suspended sediment settling from near the ocean surface, however, most likely played a role in the deposition of some of the mudstones, and was probably responsible for deposition of the radiolarites. The distribution pattern of high-TOC sediments in proximal and lower-TOC deposits in some distal facies is interpreted as a function of higher accumulation rates during radiolarian depositional events leading to a decrease in suspension-derived organic carbon in radiolarite laminae. The presence of burrows in all FAs and nearly all facies in the upper Bakken shale member indicates that dysoxic conditions prevailed during its deposition. This study shows that in intracratonic high-TOC mudstone successions such as the upper Bakken shale member bed-load processes most likely dominated sedimentation, and conditions promoted a thriving infaunal benthic community. As such, deposition of the upper Bakken shale member through dynamic processes in an overall dysoxic environment represents an alternative to conventional anoxic depositional models for world-class source rocks.

Geology, ore facies and sulfur isotopes geochemistry of the Nudeh Besshi-type volcanogenic massive sulfide deposit, southwest Sabzevar basin, Iran

NASA Astrophysics Data System (ADS)

Maghfouri, Sajjad; Rastad, Ebrahim; Mousivand, Fardin; Lin, Ye; Zaw, Khin

2016-08-01

The southwest Sabzevar basin is placed in the southwestern part of a crustal domain known as the Sabzevar zone, at the north of Central Iranian microcontinent. This basin hosts abundant mineral deposits; particularly of the Mn exhalative and Cu-Zn volcanogenic massive sulfide (VMS) types. The evolution of this basin is governed by the Neo-tethys oceanic crust subduction beneath the Central Iranian microcontinent and by the resulting continental arc (Sanandaj-Sirjan) and back-arc (Sabzevar-Naien). This evolution followed two major sequences: (I) Lower Late Cretaceous Volcano-Sedimentary Sequence (LLCVSS), which is indicated by fine-grained siliciclastic sediments, gray basic coarse-grained different pyroclastic rocks and bimodal volcanism. During this stage, tuff-hosted stratiform, exhalative Mn deposits (Nudeh, Benesbourd, Ferizy and Goft), oxide Cu deposits (Garab and Ferizy) and Cu-Zn VMS (Nudeh, Chun and Lala) deposits formed. (II) Upper Late Cretaceous Sedimentary Dominated Sequence (ULCSS), including pelagic limestone, marly tuff, silty limestone and marl with minor andesitic tuff rocks. The economically most important Mn (Zakeri and Cheshmeh-sefid) deposits of Sabzevar zone occur within the marly tuff of this sequence. The Nudeh Cu-Zn volcanogenic massive sulfide (VMS) deposit is situated in the LLCVSS. The host-rock of deposits consists of alkali olivine basalt flow and tuffaceous silty sandstone. Mineralization occurs as stratiform blanket-like and tabular orebodies. Based on ore body structure, mineralogy, and ore fabric, we recognize three different ore facies in the Nudeh deposit: (1) a stringer zone, consisting of a discordant mineralization of sulfides forming a stockwork of sulfide-bearing quartz veins cutting the footwall volcano-sedimentary rocks; (2) a massive ore, consisting of massive replacement pyrite, chalcopyrite, sphalerite and Friedrichite with magnetite; (3) bedded ore, with laminated to disseminated pyrite, and chalcopyrite. Chloritization, silicification, sericitization and epidotization are the main wall-rock alterations; alteration intensity increases towards the stringer zone. The δ34S composition of the sulfides ranges from -1.5‰ to +3.69‰ with a general increase of δ34S ratios of massive ore facies to stockwork zone. The heavier values indicate that some of the sulfur was derived from seawater sulfate that was ultimately thermochemically reduced in deep hydrothermal reaction zones. Sulfur isotopes, along with sedimentological, textural, petrological, mineralogical, and geochemical evidences, suggest that this deposit should be classified as a Besshi-type VMS ore deposit.

Integrating facies and structural analyses with subsidence history in a Jurassic-Cretaceous intraplatform basin: Outcome for paleogeography of the Panormide Southern Tethyan margin (NW Sicily, Italy)

NASA Astrophysics Data System (ADS)

Basilone, Luca; Sulli, Attilio; Gasparo Morticelli, Maurizio

2016-06-01

We illustrate the tectono-sedimentary evolution of a Jurassic-Cretaceous intraplatform basin in a fold and thrust belt present setting (Cala Rossa basin). Detailed stratigraphy and facies analysis of Upper Triassic-Eocene successions outcropping in the Palermo Mts (NW Sicily), integrated with structural analysis, restoration and basin analysis, led to recognize and describe into the intraplatform basin the proximal and distal depositional areas respect to the bordered carbonate platform sectors. Carbonate platform was characterized by a rimmed reef growing with progradational trends towards the basin, as suggested by the several reworked shallow-water materials interlayered into the deep-water succession. More, the occurrence of thick resedimented breccia levels into the deep-water succession suggests the time and the characters of synsedimentary tectonics occurred during the Late Jurassic. The study sections, involved in the building processes of the Sicilian fold and thrust belt, were restored in order to obtain the original width of the Cala Rossa basin, useful to reconstruct the original geometries and opening mechanisms of the basin. Basin analysis allowed reconstructing the subsidence history of three sectors with different paleobathymetry, evidencing the role exerted by tectonics in the evolution of the narrow Cala Rossa basin. In our interpretation, a transtensional dextral Lower Jurassic fault system, WNW-ESE (present-day) oriented, has activated a wedge shaped pull-apart basin. In the frame of the geodynamic evolution of the Southern Tethyan rifted continental margin, the Cala Rossa basin could have been affected by Jurassic transtensional faults related to the lateral westward motion of Africa relative to Europe.

Quantitative Characterisation and Analysis of Siliciclastic Fluvial Depositional Systems Using 3D Digital Outcrop Models

NASA Astrophysics Data System (ADS)

Burnham, Brian Scott

Outcrop analogue studies of fluvial sedimentary systems are often undertaken to identify spatial and temporal characteristics (e.g. stacking patterns, lateral continuity, lithofacies proportions). However, the lateral extent typically exceeds that of the exposure, and/or the true width and thickness are not apparent. Accurate characterisation of fluvial sand bodies is integral for accurate identification and subsequent modelling of aquifer and hydrocarbon reservoir architecture. The studies presented in this thesis utilise techniques that integrate lidar, highresolution photography and differential geospatial measurements, to create accurate three-dimensional (3D) digital outcrop models (DOMs) of continuous 3D and laterally extensive 2D outcrop exposures. The sedimentary architecture of outcrops in the medial portion of a large Distributive Fluvial System (DFS) (Huesca fluvial fan) in the Ebro Basin, north-east Spain, and in the fluvio-deltaic succession of the Breathitt Group in the eastern Appalachian Basin, USA, are evaluated using traditional sedimentological and digital outcrop analytical techniques. The major sand bodies in the study areas are quantitatively analysed to accurately characterise spatial and temporal changes in sand body architecture, from two different outcrop exposure types and scales. Several stochastic reservoir simulations were created to approximate fluvial sand body lithological component and connectivity within the medial portion of the Huesca DFS. Results demonstrate a workflow and current methodology adaptation of digital outcrop techniques required for each study to approximate true geobody widths, thickness and characterise architectural patterns (internal and external) of major fluvial sand bodies interpreted as products of DFSs in the Huesca fluvial fan, and both palaeovalleys and progradational DFSs in the Pikeville and Hyden Formations in the Breathitt Group. The results suggest key geostatistical metrics, which are translatable across any fluvial system that can be used to analyse 3D digital outcrop data, and identify spatial attributes of sand bodies to identify their genetic origin and lithological component within fluvial reservoir systems, and the rock record. 3D quantitative analysis of major sand bodies have allowed more accurate width vs. thickness relationships within the La Serreta area, showing a vertical increase in width and channel-fill facies, and demonstrates a 22% increase of in-channel facies from previous interpretations. Additionally, identification of deposits that are products of a nodal avulsion event have been characterised and are interpreted to be the cause for the increase in width and channel-fill facies. Furthermore, analysis of the Pikeville and Hyden Fms contain sand bodies of stacked distributaries and palaeovalleys, as previously interpreted, and demonstrates that a 3D spatial approach to determine basin-wide architectural trends is integral to identifying the genetic origin, and preservation potential of sand bodies of both palaeovalleys and distributive fluvial systems. The resultant geostatistics assimilated in the thesis demonstrates the efficacy of integrated lidar studies of outcrop analogues, and provide empirical relationships which can be applied to subsurface analogues for reservoir model development and the distribution of both DFS and palaeovalley depositional systems in the rock record.

Structural and Sequence Stratigraphic Analysis of the Onshore Nile Delta, Egypt.

NASA Astrophysics Data System (ADS)

Barakat, Moataz; Dominik, Wilhelm

2010-05-01

The Nile Delta is considered the earliest known delta in the world. It was already described by Herodotus in the 5th Century AC. Nowadays; the Nile Delta is an emerging giant gas province in the Middle East with proven gas reserves which have more than doubled in size in the last years. The Nile Delta basin contains a thick sedimentary sequence inferred to extend from Jurassic to recent time. Structural styles and depositional environments varied during this period. Facies architecture and sequence stratigraphy of the Nile Delta are resolved using seismic stratigraphy based on (2D seismic lines) including synthetic seismograms and tying in well log data. Synthetic seismograms were constructed using sonic and density logs. The combination of structural interpretation and sequence stratigraphy of the development of the basin was resolved. Seven chrono-stratigraphic boundaries have been identified and correlated on seismic and well log data. Several unconformity boundaries also identified on seismic lines range from angular to disconformity type. Furthermore, time structure maps, velocity maps, depth structure maps as well as Isopach maps were constructed using seismic lines and log data. Several structural features were identified: normal faults, growth faults, listric faults, secondary antithetic faults and large rotated fault blocks of manly Miocene age. In some cases minor rollover structures could be identified. Sedimentary features such as paleo-channels were distinctively recognized. Typical Sequence stratigraphic features such as incised valley, clinoforms, topsets, offlaps and onlaps are identified and traced on the seismic lines allowing a good insight into sequence stratigraphic history of the Nile Delta most especially in the Miocene to Pliocene clastic sedimentary succession.

Brackish to hypersaline lake dolostones of the Mississippian

NASA Astrophysics Data System (ADS)

Bennett, Carys; Kearsey, Timothy; Davies, Sarah; Millward, David; Marshall, John

2016-04-01

Flat-lying ferroan dolomite beds are common in the Mississippian and occur along the southern margin of Laurassia, from Kentucky USA to Poland. These rocks are important as they record shallow marine to coastal plain environments that may have acted as a pathway or refugia for animals that were radiating into freshwaters such as tetrapods, fish, molluscs and arthropods. This study is a contribution to the TW:eed Project (Tetrapod World: early evolution and diversification), that examines the rebuilding of Carboniferous ecosystems following a mass extinction at the end of the Devonian. The project focuses on the Tournaisian Ballagan Formation of Scotland, which contains rare fish and tetrapod fossils. The formation is characterised by an overbank facies association of siltstone, sandstone and palaeosols, interbedded with dolostone and evaporite units, and cut by fluvial sandstone facies associations of fining-upwards conglomerate lags, cross-bedded sandstone and rippled siltstone. Two sites are used as a case study to describe the sedimentological, faunal and ichnofaunal diversity of these dolostones. More than 270 dolostone beds are recorded in each of the 500 metre depth Norham Core (near Berwick-upon-Tweed) and from a 520 metre thick field section at Burnmouth. The beds are laterally extensive, over ˜1 km, although individual units do not appear to correlate between the core and the field site. In the Norham Core dolostones comprise up to 14% of the succession. 17% of the beds contain marginal marine fossils: Spirorbis, rare orthocones, brachiopods and putative marine sharks. More common fauna include ostracods, bivalves, plants, eurypterids, gastropods and sarcopterygian fish, which are interpreted as brackish to freshwater tolerant. Bioturbation is fairly common with Serpula colonies within dolostone beds and Chondrites burrowing down from the base of dolostone beds. Some rare units in the field section have a bulbous bed surface and preserve tree root traces, and 9% of all dolostone beds in the Norham Core are pedogenically altered. The isotopic composition of dolomite beds is δ18O -3.6‰ to -1.7‰ and δ13C -2.6‰ to 1.6‰ which is consistent with a brackish as opposed to marine origin. The dolostones are categorised by their sedimentary composition: Facies 1: Cemented siltstone and sandstone; Facies 2: Homogeneous micrite to micro-crystaline dolomite, within a clay matrix; Facies 3: Bedded dolomite and siltstone; Facies 4: Mixed calcite and dolomite; Facies 5: Dolomite with gypsum and anhydrite. Formation processes are diverse, and include diagenetic cementation (Facies 1), deposition in saline (brackish) lakes (Facies 2), deposition in saline lakes with clastic sediment input (Facies 3), lagoonal to shallow-marine carbonate deposition (Facies 4), and hypersaline lake to sabkha environments (Facies 5). 60% of the beds are facies 2 or 3 and their sedimentology, fauna, ichnofauna and isotopic composition indicate a brackish-water origin. Other Mississippian dolostones from around the world also contain a fairly restricted fauna and have been interpreted as brackish water deposits. The mechanism of dolomite formation under these conditions is discussed. These dolostones provided extensive coastal lakes that may have been an important habitat for tetrapods and other transitional groups during the Mississippian.

Sedimentological characterization of flood-tidal delta deposits in the Sego Sandstone, subsidence analysis in the Piceance Creek Basin, and uranium-lead geochronology (NW Colorado, USA)

NASA Astrophysics Data System (ADS)

York, Carly C.

The Sego Sandstone located in western Colorado is a member of the Upper Cretaceous Mesaverde Group and is considered an analogue of the Canadian heavy oil sands. Deposition of the Sego Sandstone occurred during the Upper Campanian (~78 Ma) at the end of the Sevier Orogeny and the beginning of the Laramide Orogeny on the western edge of the Cretaceous Interior Seaway. Although regional studies have detailed time equivalent deposits in the Book Cliffs, UT, the tidally influenced and marginal marine lithofacies observed north of Rangely, CO are distinctly different from the dominately fluvial and tidally-influenced delta facies of Book Cliff outcrops to the southwest. This study characterized flood-tidal delta deposits within the Sego Sandstone, the subsidence history of the Upper Cretaceous sedimentary rocks within the present day Piceance Creek Basin in NW Colorado, and the detrital zircon signal and oldest depositional age of the Sego Sandstone. The goals of this study are to (i) identify relative controls on reservoir characteristics of marginal marine deposits, specifically in flood-tidal delta deposits; (ii) identify the possible mechanisms responsible for subsidence within the present day Piceance Creek Basin during the Late Cretaceous; and (iii) better constrain the provenance and maximum depositional age of the Sego Sandstone. In this study I compared grain size diameter, grain and cement composition, and the ratio of pore space/cement from thin sections collected in tidal, shoreface, and flood-tidal delta facies recognized along detailed measured stratigraphic sections. This analysis provides a detailed comparison between different depositional environments and resultant data showed that grain size diameter is different between tidal, shoreface, and flood-tidal delta facies. Identifying the subsidence mechanisms affecting the Piceance Creek Basin and sediment source of the Late Cretaceous sediments, on the other hand, is important for evaluation of controls on basin filling. Additionally, U-Pb analysis better constrains youngest depositional age for the Sego Sandstone in northwestern Colorado to 76 Ma years old, where previously constraints have been based on stratigraphic relationships and biostratigraphy in eastern Utah and southeastern Colorado.

Constraints from Mesozoic siliciclastic cover rocks and satellite image analysis on the slip history of regional E-W faults in the southeast Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Tewksbury, Barbara J.; Mehrtens, Charlotte J.; Gohlke, Steven A.; Tarabees, Elhamy A.; Hogan, John P.

2017-12-01

In the southeast Western Desert of Egypt, a prominent set of E-W faults and co-located domes and basins involve sedimentary cover rock as young as the early Eocene. Although earlier Mesozoic slip on faults in southern Egypt has been widely mentioned in the literature and attributed to repeated reactivation of basement faults, evidence is indirect and based on the idea that regional stresses associated with tectonic events in the Syrian Arc would likely have reactivated basement faults in south Egypt in dextral strike slip during the Mesozoic as well as the Cenozoic. Here, we present direct evidence from the rock record for the sequence of development of features along these faults. Southwest of Aswan, a small structural dome in Mesozoic Nubia facies rocks occurs where the Seiyal Fault bends northward from west to east. The dome is cut by strands of the Seiyal Fault and a related set of cataclastic deformation bands showing dominantly right lateral strike slip, as well as by younger calcite veins with related patchy poikilotopic cement. High resolution satellite image analysis of the remote southwest Kharga Valley shows a similar sequence of events: older structural domes and basins located where E-W faults bend northward from west to east, right lateral offset of domes and basins along the E-W faults, and two sets of deformation band faults that lack co-located domes and basins. We suggest that field data, image analysis, and burial depth estimates are best explained by diachronous development of features along the E-W fault system. We propose that Late Mesozoic right lateral strike slip produced domes and basins in Nubia facies rocks in stepover regions above reactivated basement faults. We further suggest that the extensively linked segments of the E-W fault system in Nubia facies rocks, plus the deformation band systems, formed during the late Eocene when basement faults were again reactivated in dominantly right lateral strike slip.

Proliferation of MISS-related microbial mats following the end-Permian mass extinction in terrestrial ecosystems: Evidence from the Lower Triassic of the Yiyang area, Henan Province, North China

NASA Astrophysics Data System (ADS)

Tu, Chenyi; Chen, Zhong-Qiang; Retallack, Gregory J.; Huang, Yuangeng; Fang, Yuheng

2016-03-01

Microbially induced sedimentary structures (MISSs) are commonly present in siliciclastic shallow marine settings following the end-Permian mass extinction, but have been rarely reported in the post-extinction terrestrial ecosystems. Here, we present six types of well-preserved MISSs from the upper Sunjiagou Formation and lower Liujiagou Formation of Induan (Early Triassic) age in the Yiyang area, Henan Province, North China. These MISSs include: polygonal sand cracks, worm-like structures, wrinkle structures, sponge pore fabrics, gas domes, and leveled ripple marks. Microanalysis shows that these MISSs are characterized by thin clayey laminae and filamentous mica grains arranged parallel to bedding plane as well as oriented matrix supported quartz grains, which are indicative of biogenic origin. Facies analysis suggests that the MISS-hosting sediments were deposited in a fluvial sedimentary system during the Early Triassic, including lake delta, riverbeds/point bars, and flood plain paleoenvironments. Abundant MISSs from Yiyang indicate that microbes also proliferated in terrestrial ecosystems in the aftermath of the Permian-Triassic (P-Tr) biocrisis, like they behaved in marine ecosystems. Microbial blooms, together with dramatic loss of metazoans, may reflect environmental stress and degradation of terrestrial ecosystems or arid climate immediately after the severe Permian-Triassic ecologic crisis.

Ichnofabrics of the Capdevila Formation (early Eocene) in the Los Palacios Basin (western Cuba): Paleoenvironmental and paleoecological implications

NASA Astrophysics Data System (ADS)

Villegas-Martín, Jorge; Netto, Renata Guimarães; Lavina, Ernesto Luis Correa; Rojas-Consuegra, Reinaldo

2014-12-01

The ichnofabrics present in the early Eocene siliciclastic deposits of the Capdevila Formation exposed in the Pinar del Rio area (Los Palacios Basin, western Cuba) are analyzed in this paper and their paleoecological and paleoenvironmental significance are discussed. Nine ichnofabrics were recognized in the dominantly sandy sedimentary succession: Ophiomorpha, Asterosoma, Thalassinoides, Palaeophycus, Scolicia, Bichordites-Thalassinoides, Rhizocorallium, Scolicia-Thalassinoides and rhizobioturbation. Diversity of ichnofauna is low and burrows made by detritus-feeding organisms in well oxygenated and stenohaline waters predominate. Suites of the Cruziana and Skolithos Ichnofacies lacking their archetypical characteristics were recognized, being impoverished in diversity and presenting dominance of echinoderm and decapods crustacean burrows as a response to the environmental stress caused by the high frequency of deposition. The ichnofabric distribution in the studied succession, its recurrence in the sandstone beds and the presence of a Glossifungites Ichnofacies suite with rhizobioturbation associated reflect a shoaling-upward event with subaerial exposure of the substrate. The integrated analysis of the ichnology and the sedimentary facies suggests deposition in a shallow slope frequently impacted by gravitational flows and high-energy events. The evidence of substrate exposure indicates the occurrence of a forced regression and suggests the existence of a sequence boundary at the top of the Capdevila Formation.

Pangea break-up: from passive to active margin in the Colombian Caribbean Realm

NASA Astrophysics Data System (ADS)

Gómez, Cristhian; Kammer, Andreas

2017-04-01

The break-up of Western Pangea has lead to a back-arc type tectonic setting along the periphery of Gondwana, with the generation of syn-rift basins filled with sedimentary and volcanic sequences during the Middle to Late Triassic. The Indios and Corual formations in the Santa Marta massif of Northern Andes were deposited in this setting. In this contribution we elaborate a stratigraphic model for both the Indios and Corual formations, based on the description and classification of sedimentary facies and their architecture and a provenance analysis. Furthermore, geotectonic environments for volcanic and volcanoclastic rock of both units are postulated. The Indios Formation is a shallow-marine syn-rift basin fill and contains gravity flows deposits. This unit is divided into three segments; the lower and upper segments are related to fan-deltas, while the middle segment is associated to offshore deposits with lobe incursions of submarine fans. Volcanoclastic and volcanic rocks of the Indios and Corual formations are bimodal in composition and are associated to alkaline basalts. Volcanogenic deposits comprise debris, pyroclastic and lava flows of both effusive and explosive eruptions. These units record multiple phases of rifting and reveal together a first stage in the break-up of Pangea during Middle and Late Triassic in North Colombia.

Antecedent rivers and early rifting: a case study from the Plio-Pleistocene Corinth rift, Greece

NASA Astrophysics Data System (ADS)

Hemelsdaël, Romain; Ford, Mary; Malartre, Fabrice

2016-04-01

Models of early rifting present syn-rift sedimentation as the direct response to the development of normal fault systems where footwall-derived drainage supplies alluvial to lacustrine sediments into hangingwall depocentres. These models often include antecedent rivers, diverted into active depocentres and with little impact on facies distributions. However, antecedent rivers can supply a high volume of sediment from the onset of rifting. What are the interactions between major antecedent rivers and a growing normal fault system? What are the implications for alluvial stratigraphy and facies distributions in early rifts? These questions are investigated by studying a Plio-Pleistocene fluvial succession on the southern margin of the Corinth rift (Greece). In the northern Peloponnese, early syn-rift deposits are preserved in a series of uplifted E-W normal fault blocks (10-15 km long, 3-7 km wide). Detailed sedimentary logging and high resolution mapping of the syn-rift succession (400 to 1300 m thick) define the architecture of the early rift alluvial system. Magnetostratigraphy and biostratigraphic markers are used to date and correlate the fluvial succession within and between fault blocks. The age of the succession is between 4.0 and 1.8 Ma. We present a new tectonostratigraphic model for early rift basins based on our reconstructions. The early rift depositional system was established across a series of narrow normal fault blocks. Palaeocurrent data show that the alluvial basin was supplied by one major sediment entry point. A low sinuosity braided river system flowed over 15 to 30 km to the NE. Facies evolved downstream from coarse conglomerates to fined-grained fluvial deposits. Other minor sediment entry points supply linked and isolated depocentres. The main river system terminated eastward where it built stacked small deltas into a shallow lake (5 to 15 m deep) that occupied the central Corinth rift. The main fluvial axis remained constant and controlled facies distribution throughout the early rift evolution. We show that the length scale of fluvial facies transitions is greater than and therefore not related to fault spacing. First order facies variations instead occur at the scale of the full antecedent fluvial system. Strike-parallel subsidence variations in individual fault blocks represent a second order controlling factor on stratigraphic architecture. As depocentres enlarged through time, sediments progressively filled palaeorelief, and formed a continuous alluvial plain above active faults. There was limited creation of footwall relief and thus no significant consequent drainage system developed. Here, instead of being diverted toward subsiding zones, the drainage system overfilled the whole rift from the onset of faulting. Moreover, the zones of maximum subsidence on individual faults are aligned across strike parallel to the persistent fluvial axis. This implies that long-term sediment loading influenced the growth of normal faults. We conclude that a major antecedent drainage system inherited from the Hellenide mountain belt supplied high volumes of coarse sediment from the onset of faulting in the western Corinth rift (around 4 Ma). These observations demonstrate that antecedent drainage systems can be important in the tectono-sedimentary evolution of rift basins.

Sedimentary dynamics and high-frequency sequence stratigraphy of the southwestern slope of Great Bahama Bank

NASA Astrophysics Data System (ADS)

Wunsch, Marco; Betzler, Christian; Eberli, Gregor P.; Lindhorst, Sebastian; Lüdmann, Thomas; Reijmer, John J. G.

2018-01-01

New geophysical data from the leeward slope of Great Bahama Bank show how contour currents shape the slope and induce re-sedimentation processes. Along slope segments with high current control, drift migration and current winnowing at the toe of slope form a deep moat. Here, the slope progradation is inhibited by large channel incisions and the accumulation of large mass transport complexes, triggered by current winnowing. In areas where the slope is bathed by weaker currents, the accumulation of mass transport complexes and channel incision is rather controlled by the position of the sea level. Large slope failures were triggered during the Mid-Pleistocene transition and Mid-Brunhes event, both periods characterized by changes in the cyclicity or the amplitude of sea-level fluctuations. Within the seismic stratigraphic framework of third order sequences, four sequences of higher order were identified in the succession of the upper Pleistocene. These higher order sequences also show clear differences in function of the slope exposure to contour currents. Two stochastic models emphasize the role of the contour currents and slope morphology in the facies distribution in the upper Pleistocene sequences. In areas of high current influence the interplay of erosional and depositional processes form a complex facies pattern with downslope and along strike facies alterations. In zones with lower current influence, major facies alternations occur predominately in downslope direction, and a layer-cake pattern characterizes the along strike direction. Therefore, this study highlights that contour currents are an underestimated driver for the sediment distribution and architecture of carbonate slopes.

The Archaen volcanic facies in the Migori segment, Nyanza greenstone belt, Kenya: stratigraphy, geochemistry and mineralisation

NASA Astrophysics Data System (ADS)

Ichang'l, D. W.; MacLean, W. H.

The Migori segment is an 80 by 20 km portion of the Nyanza greenstone belt which forms the northern part of the Archean Tanzanian Craton in western Kenya, northern Tanzania and southeastern Uganda. It consists of two volcanic centres, each with central, proximal and distal volcanic facies, comprising the Migori Group, the Macalder and Lolgorien Subgroups, and eleven volcano-sedimentary formations. The centres are separated by a basin of tuffs and greywacke turbidites. The volcanics are bimodal mafic basalt and dolerite ( Zr/Y = 3.8 - 6.5, La N/Yb N = 1.0 - 2.4) , and felsic calc-alkaline dacite-rhyolite ( Zr/Y = 10 - 21, La N/Yb N = 19 - 42 ) and high-K dacite ( Zr/Y = 9 - 16, La N/Yb N = 21 - 22 ). Felsic units form approximately three-fourths of the volcanic stratigraphy. Basalts, calc-alkaline dacites and rhyolites were deposited in a submarine environment, but the voluminous high-K dacites were erupted subaerially. The turbidites contain units of iron-formations. Granitic intrusions are chemically continuous with the high-K dacites. The felsic volcanics are anologous to those found at modern volcanic arc subduction settings involving continental crust. The Macalder ZnCuAuAg volcanogenic massive sulphide deposits is in central facies basalts-greywacke-rhyolite. Gold mineralisation occurs in proximal facies tuffs and iron formation, and in oblique and semi-conformable quartz veins. Greenstones in the Nyanza belt are dominated by calc-alkaline felsic volcanics in constrast to the komatiite-tholeiitic basalt volcanism in the Kaapvaal Craton of South Africa, and a mixture of the two types in the Zimbabwe Craton.

Geological evolution of the North Sea: a dynamic 3D model including petroleum system elements

NASA Astrophysics Data System (ADS)

Sabine, Heim; Rüdiger, Lutz; Dirk, Kaufmann; Lutz, Reinhardt

2013-04-01

This study investigates the sedimentary basin evolution of the German North Sea with a focus on petroleum generation, migration and accumulation. The study is conducted within the framework of the project "Geoscientific Potential of the German North Sea (GPDN)", a joint project of federal (BGR, BSH) and state authorities (LBEG) with partners from industry and scientific institutions. Based on the structural model of the "Geotektonischer Atlas 3D" (GTA3D, LBEG), this dynamic 3D model contains additionally the northwestern part ("Entenschnabel" area) of the German North Sea. Geological information, e.g. lithostratigraphy, facies and structural data, provided by industry, was taken from published research projects, or literature data such as the Southern Permian Basin Atlas (SPBA; Doornenbal et al., 2010). Numerical modeling was carried out for a sedimentary succession containing 17 stratigraphic layers and several sublayers, representing the sedimentary deposition from the Devonian until Present. Structural details have been considered in terms of simplified faults and salt structures, as well as main erosion and salt movement events. Lithology, facies and the boundary conditions e.g. heat flow, paleo water-depth and sediment water interface temperature were assigned. The system calibration is based on geochemical and petrological data, such as maturity of organic matter (VRr) and present day temperature. Due to the maturity of the sedimentary organic matter Carboniferous layers are the major source rocks for gas generation. Main reservoir rocks are the Rotliegend sandstones, furthermore, sandstones of the Lower Triassic and Jurassic can serve as reservoir rocks in areas where the Zechstein salts are absent. The model provides information on the temperature and maturity distribution within the main source rock layers as well as information of potential hydrocarbon generation based on kinetic data for gas liberation. Finally, this dynamic 3D model offers a first interpretation of the current data base and an estimation of the structural- and burial evolution of the German North Sea area, including information on the petroleum system elements. It includes information about possible migration pathways, oil and gas accumulations, as well as the type of generated hydrocarbons and non-hydrocarbons. References: Doornenbal, J.C. and Stevenson, A.G. (editors), 2010. Petroleum Geological Atlas of the Southern Permian Basin Area. EAGE Publications b.v. (Houten).

Upper Cretaceous (Campanian) phosphorites in Jordan: implications for the formation of a south Tethyan phosphorite giant

NASA Astrophysics Data System (ADS)

Pufahl, Peir K.; Grimm, Kurt A.; Abed, Abdulkader M.; Sadaqah, Rushdi M. Y.

2003-10-01

A record of sedimentary, authigenic, and biological processes are preserved within the Upper Cretaceous (Campanian) Alhisa Phosphorite Formation (AP) in central and northern Jordan. The AP formed near the eastern extremity of the south Tethyan Phosphorite Province (STPP), a carbonate-dominated Upper Cretaceous to Eocene "phosphorite giant" that extends from Colombia, North Africa to the Middle East. Multidisciplinary research of the AP and associated cherts, chalks, and oyster buildups indicate that phosphatic strata formed on a highly productive, storm-dominated, east-west trending epeiric platform along the south Tethyan margin. The onset of phosphogenesis and the accumulation of economic phosphorite coincided with a rise in relative sea level that onlapped peritidal carbonates of the Ajlun Group. Pristine phosphates are associated with well-developed micrite concretionary horizons and contain abundant non-keeled spiral planktic foraminifera and a low diversity benthic assemblage of Buliminacean foraminifera, suggesting that pristine phosphates are a condensed facies and phosphogenesis was stimulated by the effects of a highly productive surface ocean and the suboxic diagenesis of sedimentary organic matter. The bulk sediment composition and absence of Fe-bearing authigenic phases such as glauconite, pyrite (including pyrite molds), siderite, and goethite within pristine phosphates suggests that deposition and authigenesis occurred under conditions of detrital starvation and that "iron-pumping" played a minimal role in phosphogenesis. Authigenic precipitation of phosphate occurred in a broad array of sedimentary environments—herein termed a "phosphorite nursery"—that spanned the entire platform. This is a non-uniformitarian phenomenon reflecting precipitation of sedimentary apatite across a wide depositional spectrum in a variety of depositional settings, wherever the conditions were suitable for phosphogenesis. Sedimentologic data indicate that pristine phosphates were concentrated into phosphatic grainstones through storm wave winnowing, and storm-generated, shelf-parallel geostrophic currents. Economic phosphorites formed through the amalgamation of storm-induced event beds. Stratigraphic packaging of phosphatic strata indicates that temporal variations in storm frequency were a prerequisite for the formation of economic phosphorite. Syndepositional phosphogenesis, reworking, and amalgamation to form phosphorites contrasts sharply with the principles of "Baturin Cycling". A transgressive systems tract coupled with high surface productivity created detritally starved settings favourable for phosphogenesis; storm reworking of pristine phosphate facies produced granular phosphorite; and amalgamation of storm-generated granular event beds formed economic phosphorite in a single systems tract.

Authigenic chlorite as a controlling factor in the exploration of Turonian/Coniacian turbidites in the Santos Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porsche, E.; Lopes de Freitas, E.

1996-08-01

Upper Turonian/Coniacian and Campanian turbidites are major targets for petroleum exploration in the Santos Basin, southeastern Brazil. They occur between 140 and 1000 m of present water depth, are buried at about 4500 m, and reach thickness of up to 60 m. The main reservoir facies is composed of unstratified, fine to very fine grained, poorly sorted sandstones, which framework is compositionally immature, including a high proportion of feldspars and volcanic rock fragments. Early coating of grains by authigenic chlorite inhibited pressure solution and quartz cementation in the reservoir. This diagenetic characteristic allowed important preservation of primary porosity (>20%) inmore » the reservoir; nevertheless its permeability never exceeds 30 ml. The study of sedimentary facies and related depositional processes has been conducted to predict the distribution of petroleum-bearing turbidites throughout the Santos Basin; this comprises a major challenge for the petroleum exploration in this important Brazilian exploration frontier.« less

Understanding the fracture role on hydrocarbon accumulation and distribution using seismic data: A case study on a carbonate reservoir from Iran

NASA Astrophysics Data System (ADS)

Karimpouli, Sadegh; Hassani, Hossein; Malehmir, Alireza; Nabi-Bidhendi, Majid; Khoshdel, Hossein

2013-09-01

The South Pars, the largest gas field in the world, is located in the Persian Gulf. Structurally, the field is part of the Qatar-South Pars arch which is a regional anticline considered as a basement-cored structure with long lasting passive folding induced by salt withdrawal. The gas-bearing reservoir belongs to Kangan and Dalan formations dominated by carbonate rocks. The fracture role is still unknown in gas accumulation and distribution in this reservoir. In this paper, the Scattering Index (SI) and the semblance methods based on scattered waves and diffraction signal studies, respectively, were used to delineate the fracture locations. To find the relation between fractures and gas distribution, desired facies containing the gas, were defined and predicted using a method based on Bayesian facies estimation. The analysis and combination of these results suggest that preference of fractures and/or fractured zones are negligible (about 1% of the total volume studied in this paper) and, therefore, it is hard to conceive that they play an important role in this reservoir. Moreover, fractures have no considerable role in gas distribution (less than 30%). It can be concluded from this study that sedimentary processes such as digenetic, primary porosities and secondary porosities are responsible for the gas accumulation and distribution in this reservoir.

Mapping rock forming minerals at Boundary Canyon, Death Valey National Park, California, using aerial SEBASS thermal infrared hyperspectral image data

NASA Astrophysics Data System (ADS)

Aslett, Zan; Taranik, James V.; Riley, Dean N.

2018-02-01

Aerial spatially enhanced broadband array spectrograph system (SEBASS) long-wave infrared (LWIR) hyperspectral image data were used to map the distribution of rock-forming minerals indicative of sedimentary and meta-sedimentary lithologies around Boundary Canyon, Death Valley, California, USA. Collection of data over the Boundary Canyon detachment fault (BCDF) facilitated measurement of numerous lithologies representing a contact between the relatively unmetamorphosed Grapevine Mountains allochthon and the metamorphosed core complex of the Funeral Mountains autochthon. These included quartz-rich sandstone, quartzite, conglomerate, and alluvium; muscovite-rich schist, siltstone, and slate; and carbonate-rich dolomite, limestone, and marble, ranging in age from late Precambrian to Quaternary. Hyperspectral data were reduced in dimensionality and processed to statistically identify and map unique emissivity spectra endmembers. Some minerals (e.g., quartz and muscovite) dominate multiple lithologies, resulting in a limited ability to differentiate them. Abrupt variations in image data emissivity amongst pelitic schists corresponded to amphibolite; these rocks represent gradation from greenschist- to amphibolite-metamorphic facies lithologies. Although the full potential of LWIR hyperspectral image data may not be fully utilized within this study area due to lack of measurable spectral distinction between rocks of similar bulk mineralogy, the high spectral resolution of the image data was useful in characterizing silicate- and carbonate-based sedimentary and meta-sedimentary rocks in proximity to fault contacts, as well as for interpreting some mineral mixtures.

Artificial delta growth

NASA Astrophysics Data System (ADS)

Mikeš, Daniel

2010-05-01

A deltaic sedimentary system has a point source; sediment is carried over the delta plain by distributary channels away from the point source and deposited at the delta front by distributary mouth bars. The established methods to describe such a sedimentary system are "bedding analysis", "facies analysis", and "basin analysis". We shall call the ambient conditions "input" and the rock record "output". There exist a number of methods to deduce input from output, e.g. "Sequence stratigraphy" (a.o. Vail et al. 1977, Catuneanu et al. 2009), "Shoreline trajectory" (a.o. Helland-Hansen & Martinsen 1996, Helland-Hansen & Hampson 2009) on the one hand and the complex use of established techniques on the other (a.o. Miall & Miall 2001, Miall & Miall 2002). None of these deductive methods seems to be sufficient. I claim that the common errors in all these attempts are the following: (1) a sedimentary system is four-dimensional (3+1) and a lesser dimensional analysis is insufficient; (2) a sedimentary system is complex and any empirical/deductive analysis is non-unique. The proper approach to the problem is therefore the theoretical/inductive analysis. To that end we performed six scenarios of a scaled version of a passive margin delta in a flume tank. The scenarios have identical stepwise tectonic subsidence and semi-cyclic sealevel, but different supply curves, i.e. supply is: constant, highly-frequent, proportional to sealevel, inversely proportional to sealevel, lagging to sealevel, ahead of sealevel. The preliminary results are indicative. Lobe-switching occurs frequently and hence locally sedimentation occurs shortly and hiatuses are substantial; therefore events in 2D (+1) cross-sections don't correlate temporally. The number of sedimentary cycles disequals the number of sealevel cycles. Lobe-switching and stepwise tectonic subsidence cause onlap/transgression. Erosional unconformities are local diachronous events, whereas maximum flooding surfaces are regional synchronous events. The evolution of the different scenarios is significantly different. These results demonstrate that the complexity of the deltaic system merits the inductive approach. References: Catuneanu, O. et al., 2009. Towards the standardization of sequence stratigraphy. Earth-Science Reviews, v. 92, p. 1-33. Helland-Hansen, W., and Martinsen, O.J., 1996, Shoreline trajectories and sequences: description of variable depositional dip scenarios: Journal of Sedimentary Research, v. 66, p. 670-688. Helland-Hansen, W. and Hampson, G.J., 2009, Trajectory analysis: concepts and applications. In: Basin Research Special Publication 21, p. 454-483. Miall, A.D., Miall, C.E., 2001, Sequence stratigraphy as a scientific enterprise: the evolution and persistence of conflicting paradigms, Earth Science Reviews, v. 54, p. 321-348. Miall, C.E., Miall, A.D., 2002, The Exxon Factor: the roles of corporate and academic science in the emergence and success of a new global model of sequence stratigraphy, Sociological Quarterly, v. 43-3, p. 307-334. Vail, P.R., Mitchum Jr., R.M., Todd, R.G., Widmier, J.M., Thompson III, S., Sangree, J.B., Bubb, J.N., Hatlelid, W.G., 1977. Seismic stratigraphy and global changes of sea-level. In: Payton, C.E. (Ed.), Seismic Stratigraphy-Applications to Hydrocarbon Exploration. American Association of Petroleum Geologists Memoir, v. 26, p. 49-212.

The Middle Jurassic basinal deposits of the Surmeh Formation in the Central Zagros Mountains, southwest Iran: Facies, sequence stratigraphy, and controls

USGS Publications Warehouse

Lasemi, Y.; Jalilian, A.H.

2010-01-01

The lower part of the Lower to Upper Jurassic Surmeh Formation consists of a succession of shallow marine carbonates (Toarcian-Aalenian) overlain by a deep marine basinal succession (Aalenian-Bajocian) that grades upward to Middle to Upper Jurassic platform carbonates. The termination of shallow marine carbonate deposition of the lower part of the Surmeh Formation and the establishment of deep marine sedimentation indicate a change in the style of sedimentation in the Neotethys passive margin of southwest Iran during the Middle Jurassic. To evaluate the reasons for this change and to assess the basin configuration during the Middle Jurassic, this study focuses on facies analysis and sequence stratigraphy of the basinal deposits (pelagic and calciturbidite facies) of the Surmeh Formation, referred here as 'lower shaley unit' in the Central Zagros region. The upper Aalenian-Bajocian 'lower shaley unit' overlies, with an abrupt contact, the Toarcian-lower Aalenian platform carbonates. It consists of pelagic (calcareous shale and limestone) and calciturbidite facies grading to upper Bajocian-Bathonian platform carbonates. Calciturbidite deposits in the 'lower shaley unit' consist of various graded grainstone to lime mudstone facies containing mixed deep marine fauna and platform-derived material. These facies include quartz-bearing lithoclast/intraclast grainstone to lime mudstone, bioclast/ooid/peloid intraclast grainstone, ooid grainstone to packstone, and lime wackestone to mudstone. The calciturbidite layers are erosive-based and commonly exhibit graded bedding, incomplete Bouma turbidite sequence, flute casts, and load casts. They consist chiefly of platform-derived materials including ooids, intraclasts/lithoclasts, peloids, echinoderms, brachiopods, bivalves, and open-ocean biota, such as planktonic bivalves, crinoids, coccoliths, foraminifers, and sponge spicules. The 'lower shaley unit' constitutes the late transgressive and the main part of the highstand systems tract of a depositional sequence and grades upward to platform margin and platform interior facies as a result of late highstand basinward progradation. The sedimentary record of the 'lower shaley unit' in the Central Zagros region reveals the existence of a northwest-southeast trending platform margin during the Middle Jurassic that faced a deep basin, the 'Pars intrashelf basin' in the northeast. The thinning of calciturbidite layers towards the northeast and the widespread Middle Jurassic platform carbonates in the southern Persian Gulf states and in the Persian Gulf area support the existence of a southwest platform margin and platform interior source area. The platform margin was formed as a result of tectonic activity along the preexisting Mountain Front fault associated with Cimmerian continental rifting in northeast Gondwana. Flooding of the southwest platform margin during early to middle Bajocian resulted in the reestablishment of the carbonate sediment factory and overproduction of shallow marine carbonates associated with sea-level highstand, which led to vertical and lateral expansion of the platform and gradual infilling of the Pars intrashelf basin by late Bajocian time. ?? 2010 Springer-Verlag.

Core evidence of paleoseismic events in Paleogene deposits of the Shulu Sag in the Bohai Bay Basin, east China, and their petroleum geologic significance

NASA Astrophysics Data System (ADS)

Zheng, Lijing; Jiang, Zaixing; Liu, Hui; Kong, Xiangxin; Li, Haipeng; Jiang, Xiaolong

2015-10-01

The Shulu Sag, located in the southwestern corner of the Jizhong Depression, Bohai Bay Basin of east China, is a NE-SW trending, elongate Cenozoic half-graben basin. The lowermost part of the third member of the Shahejie Formation in this basin is characterized by continental rudstone and calcilutite to calcisiltite facies. Based on core observation and regional geologic analysis, seismites are recognized in these lacustrine deposits, which include soft-sediment deformation structures (sedimentary dikes, hydraulic shattering, diapir structures, convolute lamination, load-flame structures, ball-and-pillow structures, loop bedding, and subsidence structures), synsedimentary faults, and seismoturbidites. In addition, mixed-source rudstones, consisting of the Paleozoic carbonate clasts and in situ calcilutite clasts in the lowermost submember of Shahejie 3, appear in the seismites, suggesting an earthquake origin. A complete representative vertical sequence in the lowermost part of the third member found in well ST1H located in the central part of the Shulu Sag shows, from the base to the top: underlying undeformed layers, synsedimentary faults, liquefied carbonate rocks, allogenetic seismoturbidites, and overlying undeformed layers. Seismites are widely distributed around this well and there are multiple sets of stacked seismites separated by undeformed sediment. The nearby NW-trending Taijiazhuang fault whose fault growth index is from 1.1 to 1.8 and the NNE-trending Xinhe fault with a fault growth index of 1.3-1.9 may be the source of the instability to create the seismites. These deformed sedimentary layers are favorable for the accumulation of oil and gas; for example, sedimentary dikes can cut through many layers and serve as conduits for fluid migration. Sedimentary faults and fractures induced by earthquakes can act as oil and gas migration channels or store petroleum products as well. Seismoturbidites and mixed-source rudstones are excellent reservoirs due to their abundant primary or dissolved pores.

Flank collapse at Mount Wrangell, Alaska, recorded by volcanic mass-flow deposits in the Copper River lowland

USGS Publications Warehouse

Waythomas, C.F.; Wallace, K.L.

2002-01-01

An areally extensive volcanic mass-flow deposit of Pleistocene age, known as the Chetaslina volcanic mass-flow deposit, is a prominent and visually striking deposit in the southeastern Copper River lowland of south-central Alaska. The mass-flow deposit consists of a diverse mixture of colorful, variably altered volcanic rocks, lahar deposits, glaciolacustrine diamicton, and till that record a major flank collapse on the southwest flank of Mount Wrangell. The deposit is well exposed near its presumed source, and thick, continuous, stratigraphic exposures have permitted us to study its sedimentary characteristics as a means of better understanding the origin, significance, and evolution of the deposit. Deposits of the Chetaslina volcanic mass flow in the Chetaslina River drainage are primary debris-avalanche deposits and consist of two principal facies types, a near-source block facies and a distal mixed facies. The block facies is composed entirely of block-supported, shattered and fractured blocks with individual blocks up to 40 m in diameter. The mixed facies consists of block-sized particles in a matrix of poorly sorted rock rubble, sand, and silt generated by the comminution of larger blocks. Deposits of the Chetaslina volcanic mass flow exposed along the Copper, Tonsina, and Chitina rivers are debris-flow deposits that evolved from the debris-avalanche component of the flow and from erosion and entrainment of local glacial and glaciolacustrine diamicton in the Copper River lowland. The debris-flow deposits were probably generated through mixing of the distal debris avalanche with the ancestral Copper River, or through breaching of a debris-avalanche dam across the ancestral river. The distribution of facies types and major-element chemistry of clasts in the deposit indicate that its source was an ancestral volcanic edifice, informally known as the Chetaslina vent, on the southwest side of Mount Wrangell. A major sector collapse of the Chetaslina vent initiated the Chetaslina volcanic mass flow forming a debris avalanche of about 4 km3 that subsequently transformed to a debris flow of unknown volume.

Stratigraphic and technological evidence from the Middle Palaeolithic-Châtelperronian-Aurignacian record at the Bordes-Fitte rockshelter (Roches d'Abilly site, Central France).

PubMed

Aubry, Thierry; Dimuccio, Luca Antonio; Almeida, Miguel; Buylaert, Jan-Pieter; Fontana, Laure; Higham, Thomas; Liard, Morgane; Murray, Andrew S; Neves, Maria João; Peyrouse, Jean-Baptiste; Walter, Bertrand

2012-01-01

This paper presents a geoarchaeological study of Middle and Upper Palaeolithic (Châtelperronian, Aurignacian and Solutrean) occupations preserved at the Bordes-Fitte rockshelter in Central France. The lithostratigraphic sequence is composed of near-surface sedimentary facies with vertical and lateral variations, in a context dominated by run-off and gravitational sedimentary processes. Field description and micromorphological analysis permit us to reconstruct several episodes of sediment slope-wash and endokarst dynamics, with hiatuses and erosional phases. The archaeostratigraphic succession includes Châtelperronian artefacts, inter-stratified between Middle Palaeolithic and Aurignacian occupations. Systematic refitting and spatial analysis reveal that the Châtelperronian point production and flake blanks retouched into denticulates, all recovered in the same stratigraphic unit, result from distinct and successive occupations and are not a 'transitional' Middle to Upper Palaeolithic assemblage. The ages obtained by (14)C place the Châtelperronian occupation in the 41-48 ka cal BP (calibrated thousands of years before present) interval and are consistent with the quartz optically stimulated luminescence age of 39 ± 2 ka and feldspar infra-red stimulated luminescence age of 45 ± 2 ka of the sediments. The Bordes-Fitte rockshelter sequence represents an important contribution to the debate about the characterization and timing of the Châtelperronian, as well as its affinities to earlier and later industries. Copyright © 2011 Elsevier Ltd. All rights reserved.

Genesis of sediment-hosted stratiform copper cobalt deposits, central African Copperbelt

NASA Astrophysics Data System (ADS)

Cailteux, J. L. H.; Kampunzu, A. B.; Lerouge, C.; Kaputo, A. K.; Milesi, J. P.

2005-07-01

The Neoproterozoic central African Copperbelt is one of the greatest sediment-hosted stratiform Cu-Co provinces in the world, totalling 140 Mt copper and 6 Mt cobalt and including several world-class deposits (⩾10 Mt copper). The origin of Cu-Co mineralisation in this province remains speculative, with the debate centred around syngenetic-diagenetic and hydrothermal-diagenetic hypotheses. The regional distribution of metals indicates that most of the cobalt-rich copper deposits are hosted in dolomites and dolomitic shales forming allochthonous units exposed in Congo and known as Congolese facies of the Katangan sedimentary succession (average Co:Cu = 1:13). The highest Co:Cu ratio (up to 3:1) occurs in ore deposits located along the southern structural block of the Lufilian Arc. The predominantly siliciclastic Zambian facies, exposed in Zambia and in SE Congo, forms para-autochthonous sedimentary units hosting ore deposits characterized by lower a Co:Cu ratio (average 1:57). Transitional lithofacies in Zambia (e.g. Baluba, Mindola) and in Congo (e.g. Lubembe) indicate a gradual transition in the Katangan basin during the deposition of laterally correlative clastic and carbonate sedimentary rocks exposed in Zambia and in Congo, and are marked by Co:Cu ratios in the range 1:15. The main Cu-Co orebodies occur at the base of the Mines/Musoshi Subgroup, which is characterized by evaporitic intertidal-supratidal sedimentary rocks. All additional lenticular orebodies known in the upper part of the Mines/Musoshi Subgroup are hosted in similar sedimentary rocks, suggesting highly favourable conditions for the ore genesis in particular sedimentary environments. Pre-lithification sedimentary structures affecting disseminated sulphides indicate that metals were deposited before compaction and consolidation of the host sediment. The ore parageneses indicate several generations of sulphides marking syngenetic, early diagenetic and late diagenetic processes. Sulphur isotopic data on sulphides suggest the derivation of sulphur essentially from the bacterial reduction of seawater sulphates. The mineralizing brines were generated from sea water in sabkhas or hypersaline lagoons during the deposition of the host rocks. Changes of Eh-pH and salinity probably were critical for concentrating copper-cobalt and nickel mineralisation. Compressional tectonic and related metamorphic processes and supergene enrichment have played variable roles in the remobilisation and upgrading of the primary mineralisation. There is no evidence to support models assuming that metals originated from: (1) Katangan igneous rocks and related hydrothermal processes or; (2) leaching of red beds underlying the orebodies. The metal sources are pre-Katangan continental rocks, especially the Palaeoproterozoic low-grade porphyry copper deposits known in the Bangweulu block and subsidiary Cu-Co-Ni deposits/occurrences in the Archaean rocks of the Zimbabwe craton. These two sources contain low grade ore deposits portraying the peculiar metal association (Cu, Co, Ni, U, Cr, Au, Ag, PGE) recorded in the Katangan sediment-hosted ore deposits. Metals were transported into the basin dissolved in water. The stratiform deposits of Congo and Zambia display features indicating that syngenetic and early diagenetic processes controlled the formation of the Neoproterozoic Copperbelt of central Africa.

Depositional History and Sequence Stratigraphy of the Middle Ordovician Yeongheung Formation (Yeongweol Group), Taebaeksan Basin, mid-east Korea

NASA Astrophysics Data System (ADS)

Kwon, Yoo Jin; Kwon, Yi Kyun

2017-04-01

The Middle Ordovician Yeongheung Formation consists of numerous meter-scale, shallowing-upward cycles which were deposited on a shallow-marine carbonate platform. Many diagnostic sedimentary textures and structures such as supratidal laminite, tepee structure, and solution-collapsed breccia are observed, which enable to infer the dry climate and high salinity conditions during deposition of the formation. In order to understand its depositional history, this study focuses on vertical and spatial stacking patterns of the second- to third-order sequences through the detailed outcrop description and geologic mapping. A total 19 lithofacies have been recognized, which can be grouped into 5 facies associations (FAs): FA1 (Supratidal flat), FA2 (Supratidal or dolomitization of peritidal facies), FA3 (Intertidal flat), FA4 (Shallow subtidal to peritidal platform), FA5 (Shallow subtidal shoal). Global mega-sequence boundary (Sauk-Tippecanoe) occurs in solution-collapsed breccia zone in the lower part of the formation. Correlation of the shallowing-upward cycle stacking pattern across the study area defines 6 transgressive-regressive depositional sequences. Each depositional sequences comprises a package of vertical and spatial staking of shallow subtidal cycles in the lower part and peritidal cycles in the upper part of the formation. According to sequence stratigraphic interpretation, the reconstructed relative sea-level curve of the Yeongweol platform is very similar to that of the Taebaek platform. Based on the absence of siliciclastic sequence such as the Jigunsan Formation and the lithologic & stratigraphic differences, however, the Yeongweol and Taebaek groups might not belong to a single depositional system within the North China platform. The Yeongweol Group can be divided by the four subunits into their unique lithologic successions and geographic distributions. The Eastern subunit of the Yeongweol Group is composed dominantly of carbonate rocks with a high composition ratio of siliciclastic materials dominated facies in the upper part of the Yeongheung Formation. The Middle1 subunit is pervasively recognized by subaerial exposures facies (carbonate breccia, paleosol), whereas the Middle2 subunit is similar to the Middle1 subunit except for the absence of subaerial exposure features. The Western subunit lost some of its primary sedimentary structure and texture in comparison to other subunits, because of the active recrystallization, metamorphism, structural deformation and carbonate diagenesis. This study reveals depositional history and refines sequence stratigraphy of the Yeongheung Formation, promoting understanding of the basin evolution of the Yeongweol Group.

Paleo-environmental Setting of the Murray Formation of Aeolis Mons, Gale Crater, Mars, as Explored by the Curiosity Rover

NASA Astrophysics Data System (ADS)

Lewis, K. W.; Fedo, C.; Grotzinger, J. P.; Gupta, S.; Stein, N.; Rivera-Hernandez, F.; Watkins, J. A.; Banham, S.; Edgett, K. S.; Minitti, M. E.; Schieber, J.; Edgar, L. A.; Siebach, K. L.; Stack, K.; Newsom, H. E.; House, C. H.; Sumner, D. Y.; Vasavada, A. R.

2017-12-01

Since landing, the Mars Science Laboratory Curiosity rover climbed 300 meters in elevation from the floor of north Gale crater up the lower northwest flank of Aeolis Mons ("Mount Sharp"). Nearly 200 meters of this ascent was accomplished in the 1.5 years alone, as the rover was driven up-section through the sedimentary rocks of the informally designated "Murray" formation. This unit comprises a large fraction of the lower strata of Mt. Sharp along the rover traverse. Our exploration of the Murray formation reveals a diverse suite of fine-grained facies. Grain sizes range from finer grains than can be resolved by the MAHLI imager (particles <62.5 microns) up to medium sand; the finer fraction comprises the bulk of the stratigraphy. Layering occurs at a range of scales; the majority is expressed as parallel laminae of mm-scale. Some sandy stratigraphic intervals exhibit cross-stratification at ripple (cm) and dune (m and larger) scales; the inferred bedforms are consistent with a range of subaqueous and aeolian depositional settings. Diagenetic features include locally variable occurrences of concretions and near-ubiquitous Ca-sulfate veins; these attest to extended interaction of the sediment with aqueous fluids in the subsurface. As a whole, the sedimentary facies of the Murray formation have been interpreted to record a predominately lacustrine paleo-environment, with likely subaerial aeolian and fluvial intervals. Further exploration, including the campaign at the hematite-bearing Vera Rubin Ridge, continues to reveal the complex and long-lived depositional history of the Gale crater basin.

Plio-Pleistocene facies environments from the KBS Member, Koobi Fora Formation: implications for climate controls on the development of lake-margin hominin habitats in the northeast Turkana Basin (northwest Kenya).

PubMed

Lepre, Christopher J; Quinn, Rhonda L; Joordens, Josephine C A; Swisher, Carl C; Feibel, Craig S

2007-11-01

Climate change is hypothesized as a cause of major events of Plio-Pleistocene East African hominin evolution, but the vertically discontinuous and laterally confined nature of the relevant geological records has led to difficulties with assessing probable links between the two. High-resolution sedimentary sequences from lacustrine settings can provide comprehensive data of environmental changes and detailed correlations with well-established orbital and marine records of climate. Hominin-bearing deposits from Koobi Fora Ridge localities in the northeast Turkana Basin of Kenya are an archive of Plio-Pleistocene lake-margin sedimentation though significant developmental junctures of northern African climates, East African environments, and hominin evolution. This study examines alluvial channel and floodplain, nearshore lacustrine, and offshore lacustrine facies environments for the approximately 136-m-thick KBS Member (Koobi Fora Formation) exposed at the Koobi Fora Ridge. Aspects of the facies environments record information on the changing hydrosedimentary dynamics of the lake margin and give insights into potential climatic controls. Seasonal/yearly climate changes are represented by the varve-like laminations in offshore mudstones and the slickensides, dish-shaped fractures, and other paleosol features overprinted on floodplain strata. Vertical shifts between facies environments, however, are interpreted to indicate lake-level fluctuations deriving from longer-term, dry-wet periods in monsoonal rainfall. Recurrence periods for the inferred lake-level changes range from about 10,000 to 50,000 years, and several are consistent with the average estimated timescales of orbital precession ( approximately 20,000 years) and obliquity ( approximately 40,000 years). KBS Member facies environments from the Koobi Fora Ridge document the development of lake-margin hominin habitats in the northeast Turkana Basin. Environmental changes in these habitats may be a result of monsoonal rainfall variations that derive from orbital insolation and/or glacial forcing.

Silurian deltaic progradation, Tassili n'Ajjer plateau, south-eastern Algeria: Sedimentology, ichnology and sequence stratigraphy

NASA Astrophysics Data System (ADS)

Djouder, Hocine; Lüning, Sebastian; Da Silva, Anne-Christine; Abdallah, Hussein; Boulvain, Frédéric

2018-06-01

The economic potential for unconventional shale oil and gas production in the Silurian of the Berkine - Ghadames and Illizi basins (BGI) in south-eastern Algeria has been recently confirmed through exploration drilling. The aim of the present paper attempts a better understanding of the Intra-Tassilian depression within the entire Silurian of the Tassili n'Ajjer plateau. The continuous deposits of the Silurian are exposed at the southern margin of the prolific BGI basins, in the Tassili n'Ajjer plateau, offering the chance to understand the sedimentology, ichnology, and to present a detailed sequence stratigraphy framework for the region. The 410 m-thick clastic Silurian sedimentary strata are subdivided into three formations in the context of sequence stratigraphy, namely: (i) the Oued Imihrou Fm. (Llandoverian) overlain by (ii) the Atafaïtafa Fm. (late Llandoverian to Wenlockian), and (iii) the Oued Tifernine Fm. (late Wenlockian to Pridolian). These can be also distinguished across the entire investigated area and laterally traceable over kilometers. Clear cyclic stacking patterns are identified within the four studied sections showing progressively a general trend of thickening- and coarsening-upward, over a complete 2nd-order megasequence (SIL-1 MS). This transgressive-regressive succession suggests deltaic progradation, shallowing and basin infilling as evidenced by numerous diagnostic sedimentary features and trace fossils, largely from eastern-to western-Tassili plateau. Indeed, the wealth of outcrop data in the Silurian siliciclastic succession enables us to distinct thirteen facies (facies A-M), ranging from shallow-to marginal-marine facies, and in turn, grouped into six facies associations (FA1-FA6). The lowermost part of the succession, which is the most prolific sources of hydrocarbons in North Africa, consists of thick organic-rich graptolite-yielding black 'hot' shales and 'lean' shales with sparse bioturbation with small Thalassinoides belonging to the distal Cruziana ichnofacies. In contrast, the uppermost part of the Silurian deposits becomes progressively coarser and fluvial in response to the progradation of the North African Akakus deltaic system, during regional sea level fall and uplifting of the region. These progradational deposits exhibit well-preserved trace fossils with moderate to high degree of bioturbation, such as Skolithos or the so-called "Tigillites" pipe-rock, Cruziana isp., Rusophycus isp., Monocraterion isp., and Syringomorpha. The SIL-1 MS is bounded by a post-glacial latest Hirnantian unconformity on the basal (SB1), as confirmed by the moderately diverse early Silurian graptolite faunas, and by the Caledonian unconformity on the top (SB7). Each of the three formations of SIL-1 MS reveals two major 3rd-order progradational sequences, commonly delineated by discontinuity surfaces (in ascending order, SB1 to SB7), and in turn, these six sequences (i.e. Si-1 to Si-6) are subdivided into at least ten shorter-term cycles. The regional extent of each unconformity is directly linked to significant facies changes and to inflection points on the global sea level curve.

Geodynamic Evolution of Northeastern Tunisia During the Maastrichtian-Paleocene Time: Insights from Integrated Seismic Stratigraphic Analysis

NASA Astrophysics Data System (ADS)

Abidi, Oussama; Inoubli, Mohamed Hédi; Sebei, Kawthar; Amiri, Adnen; Boussiga, Haifa; Nasr, Imen Hamdi; Salem, Abdelhamid Ben; Elabed, Mahmoud

2017-05-01

The Maastrichtian-Paleocene El Haria formation was studied and defined in Tunisia on the basis of outcrops and borehole data; few studies were interested in its three-dimensional extent. In this paper, the El Haria formation is reviewed in the context of a tectono-stratigraphic interval using an integrated seismic stratigraphic analysis based on borehole lithology logs, electrical well logging, well shots, vertical seismic profiles and post-stack surface data. Seismic analysis benefits from appropriate calibration with borehole data, conventional interpretation, velocity mapping, seismic attributes and post-stack model-based inversion. The applied methodology proved to be powerful for charactering the marly Maastrichtian-Paleocene interval of the El Haria formation. Migrated seismic sections together with borehole measurements are used to detail the three-dimensional changes in thickness, facies and depositional environment in the Cap Bon and Gulf of Hammamet regions during the Maastrichtian-Paleocene time. Furthermore, dating based on their microfossil content divulges local and multiple internal hiatuses within the El Haria formation which are related to the geodynamic evolution of the depositional floor since the Campanian stage. Interpreted seismic sections display concordance, unconformities, pinchouts, sedimentary gaps, incised valleys and syn-sedimentary normal faulting. Based on the seismic reflection geometry and terminations, seven sequences are delineated. These sequences are related to base-level changes as the combination of depositional floor paleo-topography, tectonic forces, subsidence and the developed accommodation space. These factors controlled the occurrence of the various parts of the Maastrichtian-Paleocene interval. Detailed examinations of these deposits together with the analysis of the structural deformation at different time periods allowed us to obtain a better understanding of the sediment architecture in depth and the delineation of the geodynamic evolution of the region.

Geologically based model of heterogeneous hydraulic conductivity in an alluvial setting

NASA Astrophysics Data System (ADS)

Fogg, Graham E.; Noyes, Charles D.; Carle, Steven F.

Information on sediment texture and spatial continuity are inherent to sedimentary depositional facies descriptions, which are therefore potentially good predictors of spatially varying hydraulic conductivity (K). Analysis of complex alluvial heterogeneity in Livermore Valley, California, USA, using relatively abundant core descriptions and field pumping-test data, demonstrates a depositional-facies approach to characterization of subsurface heterogeneity. Conventional textural classifications of the core show a poor correlation with K; however, further refinement of the textural classifications into channel, levee, debris-flow, and flood-plain depositional facies reveals a systematic framework for spatial modeling of K. This geologic framework shows that most of the system is composed of very low-K flood-plain materials, and that the K measurements predominantly represent the other, higher-K facies. Joint interpretation of both the K and geologic data shows that spatial distribution of K in this system could not be adequately modeled without geologic data and analysis. Furthermore, it appears that K should not be assumed to be log-normally distributed, except perhaps within each facies. Markov chain modeling of transition probability, representing spatial correlation within and among the facies, captures the relevant geologic features while highlighting a new approach for statistical characterization of hydrofacies spatial variability. The presence of fining-upward facies sequences, cross correlation between facies, as well as other geologic attributes captured by the Markov chains provoke questions about the suitability of conventional geostatistical approaches based on variograms or covariances for modeling geologic heterogeneity. Résumé Les informations sur la texture des sédiments et leur continuité spatiale font partie des descriptions de faciès sédimentaires de dépôt. Par conséquent, ces descriptions sont d'excellents prédicteurs potentiels des variations spatiales de la conductivité hydraulique (K). L'analyse de l'hétérogénéité des alluvions complexes de la vallée de Livermore (Californie, États-Unis), sur la base de descriptions de carottes relativement nombreuses et de données d'essais de pompage, montre que l'hétérogénéité souterraine peut être caractérisée par une approche des faciès de dépôt. Des classifications conventionnelles de la texture de la carotte montrent une corrélation médiocre avec K; toutefois, une amélioration ultérieure des classifications de texture en faciès de dépôt de chenal, de levée d'inondation, de coulée boueuse et de plaine d'inondation a fourni un cadre systématique pour une modélisation spatiale de K. Ce cadre géologique montre que le système est composé pour l'essentiel par des matériaux d'inondation à très faible perméabilité ceci laisse envisager qu'on ne peut pas supposer que K suit une distribution log-normal, sauf peut-être à l'intérieur de chaque faciès. Une modélisation par chaîne de Markov de la probabilité de passage, représentant la corrélation spatiale dans les faciès et entre eux, prend en compte les faits géologiques intéressants tout en fournissant une approche nouvelle pour une caractérisation statistique de la variabilité spatiale des faciès. La présence de séquences à faciès tronqués vers le haut, d'une corrélation croisée entre faciès, ainsi que d'autres caractères géologiques pris en compte par les chaînes de Markov conduisent à se poser des questions sur l'adéquation des approches géostatistiques conventionnelles utilisant les variogrammes ou les covariances pour modéliser l'hétérogénéité géologique. Resumen La información respecto a la textura de los sedimentos y la continuidad espacial es inherente a las descripciones de las facies deposicionales sedimentarias. De este modo, estas descripciones se convierten en excelentes predictores potenciales de las variaciones espaciales de la conductividad hidráulica (K). El análisis de la heterogeneidad en un aluvial en el Valle de Livermore (California, EEUU), a partir de las relativamente abundantes descripciones de testigos y de datos de ensayos de bombeo es una muestra del método de la facies deposicional para caracterizar la heterogeneidad subsuperficial. Las clasificaciones texturales convencionales de los testigos muestran una correlación pobre con K; sin embargo, el posterior refinamiento de la clasificación en canales, diques, flujo de derrubios y llanura de inundación revela un marco sistemático para la modelización espacial de K. Este marco geológico muestra que la mayor parte del sistema está compuesto por materiales de la llanura de inundación, de muy baja permeabilidad, y sugiere que no debe asumirse que K tiene una distribución log-normal, excepto quizás para cada facies por separado. Un modelo de cadena de Markov, tanto para representar la correlación espacial en cada facies como la relación entre las distintas facies, capta las características geológicas más importantes, a la vez que presenta un nuevo método para la caracterización estadística de la variabilidad espacial de las hidrofacies. La presencia de secuencias de facies más finas hacia la superficie, la correlación cruzada entre facies y otros atributos captados por las cadenas de Markov cuestionan lo adecuado de los métodos geoestadísticos convencionales basados en variogramas y covarianzas para modelar la heterogeneidad.

Magnetic susceptibility of the South African Agouron scientific drillcores quantifies iron and sulfur alteration relevant to geochemical oxygenation proxies

NASA Astrophysics Data System (ADS)

Raub, T. D.; Nayak, P. M.; Tikoo, S. M.; Johnson, J. E.; Peek, S.; Fischer, W. W.; Kirschvink, J. L.

2010-12-01

Various geochemical characteristics of sedimentary iron- and sulfur-bearing minerals motivate early- to late-oxygenation hypotheses from South African and Australian scientific drillcores. Most intervals of these drillcores appear to be remagnetized (in some cases multiple times); and ~2.0 Ga magnetic sulfide crystallization is particularly pervasive in carbonaceous siltstones of the ca. 2.7-2.2 Ga Griqualand margin of Kaapvaal craton. Robust interpretation of trace element abundances suggesting “whiffs” to “pervasive” levels of late Archean oxygen depends upon systematics of presumed depositional iron speciation; so multiple iron- and sulfur-mineral-altering events affecting existing drillcore records call straightforward interpretations into question. We report ca. 10,000 magnetic susceptibility measurements and associated detailed rock-magnetic results from all lithologies of Archean basinal and slope facies in drillcores GKP and GKF and relatively younger and shallower facies in Paleoproterozoic drillcores GEC and GTF. Specific carbonaceous siltstone and carbonate intervals are less-altered as revealed by coherent and relatively low magnetic susceptibilities: geochemical and biomarker interpretations based upon data from these intervals should be preferred to those from others. Magnetic susceptibility tracks subtle facies variation in drillcore GTF diamictite and suggests highly-structured Paleoproterozoic glacioeustatic sequence architecture consistent with assignment of Makganyene glaciation and its associated geochemical signature to a ca. 2.2 Ga “Snowball Earth” ice age.

Glacimarine Sedimentary Processes and Deposits at Fjord-Terminating Tidewater Glacier Margins

NASA Astrophysics Data System (ADS)

Streuff, K.; O'Cofaigh, C.; Lloyd, J. M.; Noormets, R.; Nielsen, T.; Kuijpers, A.

2016-12-01

Many fjords along Arctic coasts are influenced by tidewater glaciers, some of them fast-flowing ice sheet outlets. Such glaciers provide important links between terrestrial and marine environments, and, due to their susceptibility to climatic and oceanographic changes, have undergone a complex history of advance and retreat since the last glacial maximum (LGM). Although a growing body of evidence has led to a better understanding of the deglacial dynamics of individual glaciers since the LGM, their overall Holocene glacimarine processes and associated sedimentary and geomorphological products often remain poorly understood. This study addresses this through a detailed analysis of sediment cores, swath bathymetric and sub-bottom profiler data collected from seven fjords in Spitsbergen and west Greenland. The sediment cores preserve a complex set of lithofacies, which include laminated and massive muds in ice-proximal, and bioturbated mud in more ice-distal settings, diamicton in iceberg-dominated areas and massive sand occurring as lenses, laminae and thick beds. These facies record the interplay of three main glacimarine processes, suspension settling, iceberg rafting and sediment gravity flows, and collectively emphasise the dominance of glacial meltwater delivery to sedimentation in high Arctic fjords. The seafloor geomorphology in the fjords shows a range of landforms that include glacial lineations associated with fast ice-flow, terminal moraines and debris lobes marking former maximum glacier extents, and small transverse moraines formed during deglaciation by glaciotectonic deformation at the grounding line and crevasse-squeezing. Additional landforms such as iceberg ploughmarks, submarine channels, pockmarks, and debris lobes formed during or after deglaciation by iceberg calving, erosion by meltwater, and sediment reworking. We present here a new model for sedimentary and geomorphological processes in front of contemporary tidewater glaciers, which integrates our findings with those from Alaska, Canada, and east Greenland.

Shaler: in situ analysis of a fluvial sedimentary deposit on Mars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edgar, Lauren A.; Gupta, Sanjeev; Rubin, David M.

This article characterizes the detailed sedimentology of a fluvial sandbody on Mars for the first time and interprets its depositional processes and palaeoenvironmental setting. Despite numerous orbital observations of fluvial landforms on the surface of Mars, ground-based characterization of the sedimentology of such fluvial deposits has not previously been possible. Results from the NASA Mars Science Laboratory Curiosity rover provide an opportunity to reconstruct at fine scale the sedimentary architecture and palaeomorphology of a fluvial environment on Mars. This work describes the grain size, texture and sedimentary facies of the Shaler outcrop, reconstructs the bedding architecture, and analyses cross-stratification tomore » determine palaeocurrents. On the basis of bedset geometry and inclination, grain-size distribution and bedform migration direction, this study concludes that the Shaler outcrop probably records the accretion of a fluvial barform. The majority of the outcrop consists of large-scale trough cross-bedding of coarse sand and granules. Palaeocurrent analyses and bedform reconstruction indicate that the beds were deposited by bedforms that migrated towards the north-east, across the surface of a bar that migrated south-east. Stacked cosets of dune cross-bedding suggest aggradation of multiple bedforms, which provides evidence for short periods of sustained flow during Shaler deposition. However, local evidence for aeolian reworking and the presence of potential desiccation cracks within the outcrop suggest that fluvial deposition may have been intermittent. The uppermost strata at Shaler are distinct in terms of texture and chemistry and are inferred to record deposition from a different sediment dispersal system with a contrasting provenance. The outcrop as a whole is a testament to the availability of liquid water on the surface of Mars in its early history.« less

Shaler: in situ analysis of a fluvial sedimentary deposit on Mars

USGS Publications Warehouse

Edgar, Lauren; Gupta, Sanjeev; Rubin, David M.; Lewis, Kevin W.; Kocurek, Gary A.; Anderson, Ryan; Bell, James F.; Dromart, Gilles; Edgett, Kenneth S.; Grotzinger, John P.; Hardgrove, Craig; Kah, Linda C.; LeVeille, Richard A.; Malin, Michael C.; Mangold, Nicholas; Milliken, Ralph E.; Minitti, Michelle; Palucis, Marisa C.; Rice, Melissa; Rowland, Scott K.; Schieber, Juergen; Stack, Kathryn M.; Sumner, Dawn Y.; Wiens, Roger C.; Williams, Rebecca M.E.; Williams, Amy J.

2018-01-01

This paper characterizes the detailed sedimentology of a fluvial sandbody on Mars for the first time, and interprets its depositional processes and palaeoenvironmental setting. Despite numerous orbital observations of fluvial landforms on the surface of Mars, ground-based characterization of the sedimentology of such fluvial deposits has not previously been possible. Results from the NASA Mars Science Laboratory Curiosity rover provide an opportunity to reconstruct at fine scale the sedimentary architecture and palaeomorphology of a fluvial environment on Mars. This work describes the grain size, texture, and sedimentary facies of the Shaler outcrop, reconstructs the bedding architecture, and analyses cross-stratification to determine palaeocurrents. On the basis of bedset geometry and inclination, grain-size distribution, and bedform migration direction, this study concludes that the Shaler outcrop likely records the accretion of a fluvial barform. The majority of the outcrop consists of large-scale trough cross-bedding of coarse sand and granules. Palaeocurrent analyses and bedform reconstruction indicate that the beds were deposited by bedforms that migrated towards the northeast, across the surface of a bar that migrated southeast. Stacked cosets of dune cross-bedding suggest aggradation of multiple bedforms, which provides evidence for short periods of sustained flow during Shaler deposition. However, local evidence for aeolian reworking and the presence of potential desiccation cracks within the outcrop suggests that fluvial deposition may have been intermittent. The uppermost strata at Shaler are distinct in terms of texture and chemistry, and are inferred to record deposition from a different sediment dispersal system with a contrasting provenance. The outcrop as a whole is a testament to the availability of liquid water on the surface of Mars in its early history.

Shaler: in situ analysis of a fluvial sedimentary deposit on Mars

DOE PAGES

Edgar, Lauren A.; Gupta, Sanjeev; Rubin, David M.; ...

2017-03-09

This article characterizes the detailed sedimentology of a fluvial sandbody on Mars for the first time and interprets its depositional processes and palaeoenvironmental setting. Despite numerous orbital observations of fluvial landforms on the surface of Mars, ground-based characterization of the sedimentology of such fluvial deposits has not previously been possible. Results from the NASA Mars Science Laboratory Curiosity rover provide an opportunity to reconstruct at fine scale the sedimentary architecture and palaeomorphology of a fluvial environment on Mars. This work describes the grain size, texture and sedimentary facies of the Shaler outcrop, reconstructs the bedding architecture, and analyses cross-stratification tomore » determine palaeocurrents. On the basis of bedset geometry and inclination, grain-size distribution and bedform migration direction, this study concludes that the Shaler outcrop probably records the accretion of a fluvial barform. The majority of the outcrop consists of large-scale trough cross-bedding of coarse sand and granules. Palaeocurrent analyses and bedform reconstruction indicate that the beds were deposited by bedforms that migrated towards the north-east, across the surface of a bar that migrated south-east. Stacked cosets of dune cross-bedding suggest aggradation of multiple bedforms, which provides evidence for short periods of sustained flow during Shaler deposition. However, local evidence for aeolian reworking and the presence of potential desiccation cracks within the outcrop suggest that fluvial deposition may have been intermittent. The uppermost strata at Shaler are distinct in terms of texture and chemistry and are inferred to record deposition from a different sediment dispersal system with a contrasting provenance. The outcrop as a whole is a testament to the availability of liquid water on the surface of Mars in its early history.« less

The Paleozoic - Mesozoic Mekele Sedimentary Basin in Ethiopia: An example of an exhumed IntraCONtinental Sag (ICONS) basin

NASA Astrophysics Data System (ADS)

Alemu, Tadesse; Abdelsalam, Mohamed G.; Dawit, Enkurie L.; Atnafu, Balemwal; Mickus, Kevin L.

2018-07-01

We investigated the evolution of the Mekele Sedimentary Basin (MSB) in northern Ethiopia using geologic field and gravity data. The depth to Moho and lithospheric structure beneath the basin was imaged using two-dimensional (2D) radially-averaged power spectral analysis, Lithoflex three-dimensional (3D) forward and inverse modeling, and 2D forward modeling of the Bouguer gravity anomalies. Previous studies proposed that the basin was formed as part of a multi-branched rift system related to the breakup of Gondwana. Our results show that the MSB: (1) is circular to elliptical in map view and saucer shaped in cross sectional view, (2) is filled with terrestrial and shallow marine sedimentary rocks, (3) does not significantly structurally control the sedimentation and the major faults are post-depositional, (4) is characterized by a concentric gravity minima, (5) is underlain by an unstretched crust (∼40 km thick) and thicker lithosphere (∼120 km thick). These features compare positively with a group of basins known as IntraCONtinental Sags (ICONS), especially those ICONS formed over accretionary orogenic terranes. Since the MSB is located above the Neoproterozoic accretionary orogenic terranes of the Arabian-Nubian Shield (ANS), we propose that the formation of the MSB to be related to cooling and thickening of a juvenile sub-continental lithospheric mantle beneath the ANS, which most probably provided negative buoyancy, and hence subsidence in the MSB, leading to its formation as an ICONS. The MSB could be used as an outcrop analog for information about the internal facies architecture of ICONS because it is completely exhumed due to tectonic uplift on the western flank of the Afar Depression.

Use of the Cone Penetration Testing (CPT) method to interpret late Quaternary tide-dominated successions: A case study from the eastern China coastal plain

NASA Astrophysics Data System (ADS)

Zhang, Xia; Lin, Chun-Ming; Dalrymple, Robert W.; Gao, Shu; Canas, Daniel T.

2018-06-01

We evaluate the applicability of cone penetration testing (CPT), calibrated using adjacent cores, as a tool for the sedimentological and stratigraphic examination of late Quaternary tide-dominated successions in the eastern China coastal plain. The results indicate that the sedimentary facies and sequence-stratigraphic surfaces can be readily distinguished using CPT profiles in the Qiantang River incised-valley system because of their distinctive mechanical behavior. The lithologic character of the various facies, which is controlled mainly by sediment supply, dynamic processes and post-depositional diagenesis, is the key factor affecting how well the CPT technique works. Within this particular macrotidal environment, which is dominated by non-cohesive sand and silt in the tidal channels, the accumulation of fluid mud is rare. Consequently, the tidal-channel deposits exhibit the geotechnical properties of coarse-grained sediments, and can be easily distinguished from the mud-dominated facies. However, in the nearby Changjiang delta system which is characterized by very high suspended-sediment concentrations and an abundance of fine-grained cohesive sediments, the presence of channel-bottom fluid muds makes it difficult to recognize channel deposits, because of the lack of a sharp lithologic contrast at their base. Consequently, the CPT method might not be as universally effective in tide-dominated systems as it appears to be in wave-dominated settings. Care is needed in the interpretation of the results from tide-dominated successions because of the widespread presence of fluid muds, the heterolithic nature of tidal deposits, the rheological similarity between adjacent facies, and the averaging of geotechnical properties between the alternating finer and coarser layers.

Record of continental to marine transition from the Mesoproterozoic Ampani basin, Central India: An exercise of process-based sedimentology in a structurally deformed basin

NASA Astrophysics Data System (ADS)

Chakraborty, Partha Pratim; Saha, Subhojit; Das, Kaushik

2017-08-01

The Mesoproterozoic Ampani Group of rocks, a structurally deformed sedimentary package hosted within the Bastar Craton in central India, was studied for process-based facies and paleoenvironmental analyses. Outcrop mapping on 1:1500 scale, deconvolution of deformation pattern, and process-based facies analyses have led to the identification of fifteen facies types, clubbed under four facies associations. A range of paleoenvironmental settings varying from continental fluvial to distal marine shelf is inferred. Deductive paleohydrology revealed poorly-efficient 'dirty river' character for the Ampani River system with low water discharge. However, at times of catastrophic sheet floods release of sediments trapped at the river mouth in form of hyperpycnal underflows triggered formation of river mouth delta. Reworking of delta front sediment in wave-dominated coastline resulted development of beach-foreshore and shoreface (proximal to distal). Variation in the relative proportion of bar and interbar products within the shoreface successions exposed at different studied sections is interpreted as signature of relative bathymetric variation. The pro-deltaic Ampani shelf was storm infested. Tectonic perturbance in the basin hinterland in course of Ampani sedimentation is inferred from occurrence of a disparately thick lobate high-density flow deposit towards the top of shoreface succession and increase in feldspar content upward within the shoreface succession. Addition of detritus from a ∼1600 Ma Mesoproterozoic provenance in upper part of shoreface also strengthen the contention. Deconvolution of deformation pattern and delineation of environmental products ranging between continental and deep marine allowed us to infer the Ampani sediment package as fining-upward in character evolved in a transgressive mode.

The depositional setting of the Late Quaternary sedimentary fill in southern Bannu basin, Northwest Himalayan fold and thrust belt, Pakistan.

PubMed

Farid, Asam; Khalid, Perveiz; Jadoon, Khan Zaib; Jouini, Mohammed Soufiane

2014-10-01

Geostatistical variogram and inversion techniques combined with modern visualization tools have made it possible to re-model one-dimensional electrical resistivity data into two-dimensional (2D) models of the near subsurface. The resultant models are capable of extending the original interpretation of the data to depict alluvium layers as individual lithological units within the 2D space. By tuning the variogram parameters used in this approach, it is then possible to visualize individual lithofacies and geomorphological features for these lithologic units. The study re-examines an electrical resistivity dataset collected as part of a groundwater study in an area of the Bannu basin in Pakistan. Additional lithological logs from boreholes throughout the area have been combined with the existing resistivity data for calibration. Tectonic activity during the Himalayan orogeny uplifted and generated significant faulting in the rocks resulting in the formation of a depression which subsequently has been filled with clay-silt and dirty sand facies typical of lacustrine and flood plain environments. Streams arising from adjacent mountains have reworked these facies which have been eroded and replaced by gravel-sand facies along channels. It is concluded that the sediments have been deposited as prograding fan shaped bodies, flood plain, and lacustrine deposits. Clay-silt facies mark the locations of paleo depressions or lake environments, which have changed position over time due to local tectonic activity and sedimentation. The Lakki plain alluvial system has thus formed as a result of local tectonic activity with fluvial erosion and deposition characterized by coarse sediments with high electrical resistivities near the mountain ranges and fine sediments with medium to low electrical resistivities towards the basin center.

SHRIMP U-Pb zircon dating from eclogite lenses in marble, Dabie-Sulu UHP terrane: restriction on the prograde, UHP and retrograde metamorphic ages

NASA Astrophysics Data System (ADS)

Liu, F.; Gerdes, A.; Xue, H.; Liang, F.

2006-12-01

Eclogite as lenses in impure marbles from Dabie-Sulu UHP terrane, represent parts of deeply subducted meta- sedimentary rocks. To constrain the age of metamorphism during subduction and exhumation, zircons from 2 eclogite samples in Dabie-Sulu impure marbles have been investigated. Beside Inherited (detrital) grains, 3 different metamorphic zircon domains have been identified based on distribution of mineral inclusion, trace elements and cathodoluminescence (CL) imaging: 1. Dark-luminescent rounded cores with quartz eclogite- facies mineral inclusions suggest formation at high-pressure (HP) metamorphic conditions. 2. White- luminescent zircon, either surrounding domain 1 or as rounded to spindly cores with index coesite eclogite- facies mineral inclusions indicates formation at UHP conditions. 3. Grey-luminescent rims around domain 2 with low-pressure mineral inclusions suggest formation during late regional amphibolite-facies retrogression. The three distinct zircon domains were dated by SHRIMP and yielded three discrete and meaningful age groups: 245±4 Ma for prograde HP metamorphism, 235±3 Ma for UHP metamorphism and 215±6 Ma for late amphibolite-facies retrogression from Dabie-Sulu eclogite. This data suggests that subduction and exhumation took place in about 10-11 Myr and 19-20 Myr, respectively. Continental materials was subducted from surface to the deep mantle depth at rates of 10 km/Myr, and subsequently exhumed from the mantle to the base of the crust at rates of 7 km/Myr. Ultrafast exhumation of the Dabie-Sulu UHP terrane from depth of 160 to 30 km was probably driven by buoyancy forces after UHP slab break-off at deep mantle depths.

Sedimentological and diagenetic patterns of anhydrite deposits in the Badenian evaporite basin of the Carpathian Foredeep, southern Poland

NASA Astrophysics Data System (ADS)

Kasprzyk, Alicja

2003-05-01

Anhydrite deposits are widely distributed in the Middle Miocene Badenian evaporite basin of Poland, including the marginal sulphate platform and adjacent salt depocenter. Particular sedimentological, petrographic and geochemical characteristics of these anhydrite deposits and especially common pseudomorphic features, inherited from the precursor gypsum deposits, allow the interpretation of the original sedimentary facies. The observed facies distribution and succession (lower and upper members) reveal three distinct facies associations that record a range of depositional environments from nearshore to deeper basinal settings. Platform sulphates were deposited in subaerial and shallow-marine environments (shoreline and inner platform-lagoon system) mainly as autochthonous selenitic gypsum. This was reworked and redistributed into deeper waters (outer platform-lagoon, slope and the proximal basin floor system) to form resedimented facies composed mostly of allochthonous clastic gypsum and minor anhydrite. The general variation in petrographic and geochemical compositions of anhydrite lithofacies of the lower and upper members reflects the brine evolution, as the result of interactions between seawater, meteoric runoff and highly saline, residual pore fluids. The results indicate the importance of synsedimentary and diagenetic anhydritisation processes in formation of the Badenian anhydrite lithofacies, all of which preserve the original depositional features of the former gypsum. This also applies to the basinal anhydrite previously interpreted to have a depositional genesis. Two different genetic patterns of anhydrite have been reinforced by this study: (1) synsedimentary anhydritisation of gypsum deposits by highly concentrated brines or elevated temperatures in surficial to shallow-burial environments (lower member), and (2) successive phases (syndepositional de novo growth, early diagenetic to late diagenetic replacement of former gypsum) of anhydrite formation during progressive burial (upper member).

Cambrian Series 3 carbonate platform of Korea dominated by microbial-sponge reefs

NASA Astrophysics Data System (ADS)

Hong, Jongsun; Lee, Jeong-Hyun; Choh, Suk-Joo; Lee, Dong-Jin

2016-07-01

Metazoans have been considered as negligible components of Cambrian Series 3 and Furongian microbial-dominated reefs, in contrast to their presence in earlier Terreneuvian-Cambrian Series 2 microbial-archaeocyath reefs. However, recent discoveries of sponges in Cambrian Series 3-Furongian reefs of Australia, China, Iran, USA, and Korea have raised question regarding their contribution in terms of carbonate platform development, which have never been assessed. This study examines Cambrian Series 3 deposits of the Daegi Formation, Korea to elucidate this question. The 100-m-thick middle part of the Daegi Formation is dominated by boundstone facies, which occupies 45% of the study interval, as well as bioclastic wackestone to packstone, bioclastic grainstone, and ooid packstone to grainstone facies. The Daegi reefs are primarily thrombolitic in composition, with 90% (n = 26/29) of the reefs containing an average of 9% sponges in aerial percentage calculated from thin sections. Lithistid sponges composed of peloidal fabrics, some desma spicules, and spicule networks commonly occupy the interstitial space in microbial clusters, are encrusted by mesoclots and Epiphyton, and are surrounded by micrite. Subordinate non-lithistid demosponges occur within clusters of microbial elements. The middle Daegi Formation can be largely subdivided into shoal environment dominated by grainstone to packstone facies and shallow subtidal platform interior environment located behind shoal with wackestone to packstone facies. The microbial-sponge reefs mainly developed around platform interior as patch reefs. The current study indicates that metazoans in the form of lithistid and non-lithistid demosponges are nearly ubiquitously incorporated in Daegi reefs and contributed greatly to the formation of microbial-sponge reefs as well as carbonate platform during the time. Study of these microbial-sponge reefs and their distribution within the carbonate platform may help us to understand how carbonate sedimentary environments responded to the extinction of archaeocyaths.

Stromatolite- and coated-grain-bearing carbonate rocks of the western Brooks Range: A section in Geologic studies in Alaska by the U.S. Geological Survey during 1987

USGS Publications Warehouse

Dumoulin, Julie A.

1988-01-01

Carbonate rocks characterized by locally abundant stromatolites and coated grains have been found at several localities in the Baird Mountains and Ambler River quadrangles (fig. 1). These rocks are part of a belt of metasedimentary and metaigneous rocks that constitutes the southwestern flank of the Brooks Range; all are included in the parautochthon (Schwatka sequence) of Mayfield and others (1983). The rocks have been deformed and metamorphosed to blueschist and greenschist facies, but primary textures and sedimentary structures are locally well preserved.

Late Neogene sedimentary facies and sequences in the Pannonian Basin, Hungary

USGS Publications Warehouse

Juhasz, E.; Phillips, L.; Muller, P.; Ricketts, B.; Toth-Makk, A.; Lantos, M.; Kovacs, L.O.

1999-01-01

This paper is part of the special publication No.156, The Mediterranean basins: Tertiary extension within the Alpine Orogen. (eds B.Durand, L. Jolivet, F.Horvath and M.Seranne). Detailed sedimentological, facies and numerical cycle analysis, combined with magnetostratigraphy, have been made in a number of boreholes in the Pannonian Basin, in order to study the causes of relative water-level changes and the history of the basin subsidence. Subsidence and infilling of the Pannonian Basin, which was an isolated lake at that time occurred mainly during the Late Miocene and Pliocene. The subsidence history was remarkably different in the individual sub-basins: early thermal subsidence was interrupted in the southern part of the basin, while high sedimentation rate and continuous subsidence was detected in the northeastern sub-basin. Three regional unconformities were detected in the Late Neogene Pannonian Basin fill, which represent 0.5 and 7.5 Ma time spans corresponding to single and composite unconformities. Consequently two main sequences build up the Late Neogene Pannonian Basin fill: a Late Miocene and a Pliocene one. Within the Late Miocene sequence there are smaller sedimentary cycles most probably corresponding to climatically driven relative lake-level changes in the Milankovitch frequency band. Considering the periods, the estimated values for precession and eccentricity in this study (19 and 370 ka) are close to the usually cited ones. In the case of obliquity the calculated period (71 ka) slightly deviates from the generally accepted number. Based on the relative amplitudes of oscillations, precession (sixth order) and obliquity (fifth order) cycles had the most significant impact on the sedimentation. Eccentricity caused cycles (fourth order) are poorly detectable in the sediments. The longer term (third order) cycles had very slight influence on the sedimentation pattern. Progradation, recorded in the Late Miocene sequence, correlates poorly in time within the basin. The dominant controls of this process probably were changes of basin subsidence rate and the very high sedimentation rate. The slow, upward trend of silt and sand bed thickness as well as that of the grain size also reflects the local progradation.

A Compound-Specific Hydrogen Isotope Record at the Onset of Ocean Anoxic Event 2, Kaiparowits Plateau, Southern Utah

NASA Astrophysics Data System (ADS)

Todes, J.; Jones, M. M.; Sageman, B. B.; Osburn, M. R.

2017-12-01

Rhythmic lithologic variations (limestone-shale couplets) interpreted to reflect Milankovitch cycles occur at the onset of Ocean Anoxic Event 2 (OAE2) in deposits of the Western Interior Seaway. These couplets have been interpreted to reflect climate cycles: however, the physical mechanism(s) through which climate cycles were translated to the sedimentary record during peak greenhouse conditions remain unsettled. Although glacioeustasy has been considered, variance in surface ocean temperature, ocean circulation, or local hydrology may be more plausible options. Compound-specific hydrogen isotope ratios (δ2H) of n-alkanes and other biomarkers may provide a means to evaluate such mechanisms. Since sedimentary alkanes are direct products of plants and membrane lipid diagenesis and are resistant to secondary hydrogen exchange during thermal maturation at low (<100 oC) temperatures, they have the potential to reflect the isotopic composition of primary waters. The Tropic Shale of the Kaiparowits Plateau (Southern Utah) provides an exceptional opportunity to explore δ2H variability in this interval. Outcrop samples of three couplets have been extracted, separated, and analyzed to ascertain facies-specific δ2H variability. Strong odd-over-even n-alkane chain length distributions suggest low thermal maturity and the possible preservation of primary δ2H values. Short and long chain ­n-alkanes are potentially sourced from planktonic biomass and terrestrial plants, respectively, enabling a comparison of climatic processes between marine and terrestrial settings. Biomarkers, including both steranes and hopanes, are also preserved and reflect putative source organisms and local paleoenvironmental conditions. Facies-specific δ2H analysis will allow for evaluation of changes in the dominant source of atmospheric moisture in the Western Interior during orbitally-forced climate cycles. Organic matter deposited during periods of northerly Boreal influence would have a depleted 2H-isotope composition relative to those deposited during periods of more southerly Tethys influence. In this model, these variations are reflected by lithology - limestone deposition would occur during warm, evaporative Tethys-dominated times, while cooler, wetter Boreal periods would promote shale deposition.

Sedimentary control of volcanic debris-avalanche structures and transformation into lahars

NASA Astrophysics Data System (ADS)

Bernard, Karine; van Wyk de Vries, Benjamin; Thouret, Jean-Claude; Roche, Olivier; Samaniego Eguiguren, Pablo

2017-04-01

Volcanic debris avalanche structures and related transformations into lahars have been extensively analysed in order to establish a sedimentary classification of the deposits. Textural and structural variations of eight debris-avalanche deposits (DADs) have been correlated with Shape Preferred Orientation of 30,000 clasts together with grain-size distributions and statistical parameters from 156 sieved matrix samples. Granular segregation patterns have been observed with structural fault controls: proximal granular-segregation structures of the Tutupaca DAD ridges in Peru, basal sheared bands along overthrust lateral levee (Mt. Dore, France), mixing and cataclasis of fault-controlled deposits in half-graben during lateral spreading of distal thrust lobe (Pichu-Pichu, Peru), neo-cataclasis at the frontal thrust lobe (Meager, Canada and Mt. Dore, France). A logarithmic regression characterises the % matrix vs. matrix/gravels showing proximal and primary cataclasis, hybrid DADs with polymodal matrix and mixed facies up to transformations into lahar (Misti, Mt Dore). The sequential fragmentation helps to distinguish DAD that belong to Andean and Cascade Volcanic arcs (Tutupaca and Misti, Peru; Meager, Canada) to the hybrid DADs, before distal transformation into lahars (Pichu-Pichu); and hydrovolcanic fragmentation characterises the transformed lahar deposits (Misti). The fractal values of 150 sieved samples range between 2.3 and 2.7, implying extensional fractures with granular disaggregation. Skewness vs. kurtosis values help to distinguish the proximal mass wasting deposits and the transformed deposits by dilution. The sorting vs. median values enable us to differentiate the hybrid DADs with the transformed deposits by dilution. The sedimentological statistical parameters with Shape Preferred Orientation analysis that have been correlated with textural and structural observations show textural fabrics resulting from kinematic processes: cataclasis, hybrid matrix facies and transformations. Inherited fractures from tectono-volcanic structures contribute to the particle size distributions of DAD and associated deposits such as pyroclastic and lahar deposits (Misti, Mt Dore, Tutupaca). The statistical results highlight granular structure and kinematic process of DAD transformations into lahars and associated deposits, which would contribute to understand the rheological process behind the excess DAD run-out and to test granular models for DAD transformations. Key words: volcanic debris-avalanche deposits, lahar transformation, structure, sedimentology, hazard

Geothermal prospection in the Greater Geneva Basin (Switzerland and France): Structural and reservoir quality assessment

NASA Astrophysics Data System (ADS)

Rusillon, Elme; Clerc, Nicolas; Makhloufi, Yasin; Brentini, Maud; Moscariello, Andrea

2017-04-01

A reservoir assessment was performed in the Greater Geneva Basin to evaluate the geothermal resources potential of low to medium enthalpy (Moscariello, 2016). For this purpose, a detail structural analysis of the basin was performed (Clerc et al., 2016) simultaneously with a reservoir appraisal study including petrophysical properties assessment in a consistent sedimentological and stratigraphical frame (Brentini et al., 2017). This multi-disciplinary study was organised in 4 steps: (1) investigation of the surrounding outcrops to understand the stratigraphy and lateral facies distribution of the sedimentary sequence from Permo-Carboniferous to Lower Cretaceous units; (2) development of 3D geological models derived from 2D seismic and well data focusing on the structural scheme of the basin to constrain better the tectonic influence on facies distribution and to assess potential hydraulic connectivity through faults between reservoir units ; (3) evaluation of the distribution, geometry, sedimentology and petrophysical properties of potential reservoir units from well data; (4) identification and selection of the most promising reservoir units for in-depth rock type characterization and 3D modeling. Petrophysical investigations revealed that the Kimmeridgian-Tithonian Reef Complex and the underlying Calcaires de Tabalcon units are the most promising geothermal reservoir targets (porosity range 10-20%; permeability to 1mD). Best reservoir properties are measured in patch reefs and high-energy peri-reefal depositional environments, which are surrounded by synchronous tight lagoonal deposits. Associated highly porous dolomitized intervals reported in the western part of the basin also provide enhanced reservoir quality. The distribution and geometry of best reservoir bodies is complex and constrained by (1) palaeotopography, which can be affected by synsedimentary fault activity during Mesozoic times, (2) sedimentary factors such as hydrodynamics, sea level variations, or sedimentation rates and (3) diagenetic history (Makhloufi et al., 2017). A detail structural characterization of the basin using 2D seismic data reveals the existence of several wrench fault zones and intra-basinal thrusts across the basin, which could act as hydraulic conduits and play a key role in connecting the most productive reservoir facies. To understand the propagation of these heterogeneous reservoirs, rock types are currently defined and will be integrated into 3D geological models. This integrated study allows us to understand better the distribution and properties of productive reservoir facies as well as hydraulic connectivity zones within the study area. This provides consistent knowledge for future geothermal exploration steps toward the successful development of this sustainable energy resource in the Greater Geneva Basin. Brentini et al. 2017 : Geothermal prospection in the Greater Geneva Basin: integration of geological data in the new Information System. Abstract, EGU General Assembly 2017, Vienna, Austria Clerc et al. 2016 : Structural Modeling of the Geneva Basin for Geothermal Ressource Assessment. Abstract, 14th Swiss Geoscience Meeting, Geneva, Switzerland Makhloufi et al. 2017 : Geothermal prospection in the Greater Geneva Basin (Switzerland and France) : impact of diagenesis on reservoir properties of the Upper Jurassic carbonate sediments. Abstract, EGU General Assembly 2017, Vienna, Austria Moscariello, A. 2016 : Geothermal exploration in SW Switzerland, Proceeding , European Geotermal Congress 2016, Strasbourg, France

A short review of paleoenvironments for Lower Beaufort (Upper Permian) Karoo sequences from southern to central Africa: A major Gondwana Lacustrine episode

NASA Astrophysics Data System (ADS)

Yemane, K.; Kelts, K.

This paper compares Karoo deposits within the Lower Beaufort (Late Permian) time interval from southern to central Africa. Facies aspects are summarized for selected sequences and depositional environments assessed in connection with the palaeogeography. The comparison shows that thickness of Lower Beaufort sequences varies greatly; sequences are over a kilometre thick at the southern tip, but decrease drastically to the north, northwest and northeast, and is commonly absent from the western part of the subcontinent. Depositional environments are continental except for small estuarine intervals from a sequence in Tanzania. The commonest lithologies comprise mudstones, siltstones, arkoses and carbonates. In spite of the dominance of fluvial facies, the records preserved by intervals of lacustrine sequences suggest that large lakes were major features of the palaeogeography, and that lacustrine environments may have been dominant deposition environments. The Lower Beaufort landscape is generally interpreted as an expansive cratonic lowland with meandering rivers and streams crossing vast floodplains, which were indented by concomitant shallow lakes of various sizes. The lakes from the Karoo tectono-sedimentary terrain were often ephemeral and closely linked with fluvial processes, but large, anoxic lakers are also documented. On the other hand, giant, freshwater lakes, covered large areas of the Zambezian tectono-sedimentary terrain and may have been locally connected. Evidence from abundant freshwater fossil assemblages, particularly from the Zambezian tectono-sedimentary terrain suggest that in spite of the generally semi-arid global climate of the Upper Permian, seasonal precipitation (monsoonal?) supplied enough moisture to sustain large perennial lakes. Because of the unique nature of the Permian cotinental configuration and palaeogeography, however, modern analogues of large systems are lacking. The general lithological and palaeontological correlability of Lower Beaufort sequences suggests a similar regional palaeoclimate, whereas the differences in distribution are taken to be a result of control of tectonic settings. From the widespread occurrences of lake deposits in the African subcontinent, over relatively long interval, we conclude that lake deposits provide more information for a better understanding of Karoo palaeogeography than previously thought, since such lacustrine sequences should hold sensitive, high resolution records for palaeoenvironmental interpretations.

The Upper Jurassic Stanleyville Group of the eastern Congo Basin: An example of perennial lacustrine system

NASA Astrophysics Data System (ADS)

Caillaud, Alexis; Blanpied, Christian; Delvaux, Damien

2017-08-01

The intracratonic Congo Basin, located in the Democratic Republic of Congo (DRC), is the largest sedimentary basin of Africa. The Jurassic strata outcrop along its eastern margin, south of Kisangani (formerly Stanleyville). In the last century, the Upper Jurassic Stanleyville Group was described as a lacustrine series containing a thin basal marine limestone designed as the ;Lime Fine; beds. Since the proposal of this early model, the depositional environment of the Stanleyville Group, and especially the possible marine incursion, has been debated, but without re-examining the existing cores, outcrop samples and historical fossils from the type location near Kisangani that are available at the Royal Museum for Central Africa (MRAC/KMMA, Tervuren, Belgium). In order to refine the former sedimentology, a series of nine exploration cores drilled in the Kisangani sub-basin have been described. This study aims at integrating sedimentary facies in existing sedimentary models and to discuss the hypothesis of the presence of Kimmeridgian marine deposits along the Congo River near Kisangani, a region which lies in the middle of the African continent. Eight facies have been identified, which permit a reinterpretation of the depositional environment and paleogeography of the Stanleyville Group. The base of the Stanleyville Group is interpreted to represent a conglomeratic fluvial succession, which filled an inherited Triassic paleotopography. Above these conglomerates, a transition to a typically lacustrine system is interpreted, which includes: (1) a basal profundal, sublittoral (brown to dark fine-grained siltstones with microbial carbonates, i.e., the ;Lime Fine; beds) and littoral lacustrine series; covered by (2) a sublittoral to profundal interval (brown to dark organic-rich, fine-grained siltstones), which corresponds to the maximum extent of the paleo-lake; and, finally (3) a shallow lacustrine series (greenish calcareous siltstones and sandstones with red siltstones). Unlike what has been proposed, the ;Lime Fine; beds are interpreted herein to be of lacustrine origin, rather than representing a Kimmeridgian marine transgression. We conclude that a Jurassic marine transgression did not, in fact, occur in the eastern region of the Congo Basin.

High resolution multi-facies realizations of sedimentary reservoir and aquifer analogs

PubMed Central

Bayer, Peter; Comunian, Alessandro; Höyng, Dominik; Mariethoz, Gregoire

2015-01-01

Geological structures are by nature inaccessible to direct observation. This can cause difficulties in applications where a spatially explicit representation of such structures is required, in particular when modelling fluid migration in geological formations. An increasing trend in recent years has been to use analogs to palliate this lack of knowledge, i.e., exploiting the spatial information from sites where the geology is accessible (outcrops, quarry sites) and transferring the observed properties to a study site deemed geologically similar. While this approach is appealing, it is difficult to put in place because of the lack of access to well-documented analog data. In this paper we present comprehensive analog data sets which characterize sedimentary structures from important groundwater hosting formations in Germany and Brazil. Multiple 2-D outcrop faces are described in terms of hydraulic, thermal and chemical properties and interpolated in 3-D using stochastic techniques. These unique data sets can be used by the wider community to implement analog approaches for characterizing reservoir and aquifer formations. PMID:26175910

Continuous seismic-reflection survey defining shallow sedimentary layers in the Charlotte Harbor and Venice areas, southwest Florida

USGS Publications Warehouse

Wolansky, R.M.; Haeni, F.P.; Sylvester, R.E.

1983-01-01

A continuous marine seismic-reflection survey system was used to define the configuration of shallow sedimentary layers underlying the Charlotte Harbor and Venice areas, southwest Florida. Seismic profiling was conducted over a distance of about 57 miles of Charlotte Harbor, the Peace and Myakka Rivers, and the Intracoastal Waterway near Venice using a high resolution energy source capable of penetrating 200 feet of sediments with a resolution of 1 to 3 feet. Five stratigraphic units defined from the seismic records includes sediments to Holocene to early Miocene age. All seismic-profile records are presented, along with geologic sections constructed from the records. Seismic reflection amplitude, frequency, continuity, configuration, external form, and areal association were utilized to interpret facies and depositional environments of the stratigraphic units. The despositional framework of the units ranges from shallow shelf to prograded slope. The stratigraphic units are correlated with the surficial aquifer and intermediate artesian aquifers, and permeable zones of the aquifers are related to the seismic records. (USGS)

The interplay of fractures and sedimentary architecture: Natural gas from reservoirs in the Molina sandstones, Piceance Basin, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lorenz, J.C.

1997-03-01

The Molina Member of the Wasatch Formation produces natural gas from several fields along the Colorado River in the Piceance Basin, northwestern Colorado. The Molina Member is a distinctive sandstone that was deposited in a unique fluvial environment of shallow-water floods. This is recorded by the dominance of plane-parallel bedding in many of the sandstones. The Molina sandstones crop out on the western edge of the basin, and have been projected into the subsurface and across the basin to correlate with thinner sandy units of the Wasatch Formation at the eastern side of the basin. Detailed study, however, has shownmore » that the sedimentary characteristics of the type-section Molina sandstones are incompatible with a model in which the eastern sandstones are its distal facies equivalent. Rather, the eastern sandstones represent separate and unrelated sedimentary systems that prograded into the basin from nearby source-area highlands. Therefore, only the subsurface {open_quotes}Molina{close_quotes} reservoirs that are in close proximity to the western edge of the basin are continuous with the type-section sandstones. Reservoirs in the Grand Valley and Rulison gas fields were deposited in separate fluvial systems. These sandstones contain more typical fluvial sedimentary structures such as crossbeds and lateral accretion surfaces. Natural fractures play an important role in enhancing the conductivity and permeability of the Molina and related sandstones of the Wasatch Formation.« less

Paleomagnetism and rock magnetism from sediments along a continental shelf-to-slope transect in the NW Barents Sea: Implications for geomagnetic and depositional changes during the past 15 thousand years

NASA Astrophysics Data System (ADS)

Caricchi, C.; Lucchi, R. G.; Sagnotti, L.; Macrì, P.; Morigi, C.; Melis, R.; Caffau, M.; Rebesco, M.; Hanebuth, T. J. J.

2018-01-01

Paleomagnetic and rock magnetic data were measured on glaciomarine silty-clay successions along an E-W sediment-core transect across the continental shelf and slope of the Kveithola paleo-ice stream system (south of Svalbard, north-western Barents Sea), representing a stratigraphic interval spanning the last deglaciation and the Holocene. The records indicate that magnetite is the main magnetic mineral and that magnetic minerals are distinctly less abundant on the shelf than at the continental slope. The paleomagnetic properties allow for the reconstruction of a well-defined characteristic remanent magnetization (ChRM) throughout the sedimentary successions. The stratigraphic trends of rock magnetic and paleomagnetic parameters are used for a shelf-slope core correlation and sediment facies analysis is applied for depositional processes reconstruction. The new paleomagnetic records compare to the PSV and RPI variation predicted for the core sites by a simulation using the global geomagnetic field variation models SHA.DIF.14k and CALS7K.2 and closest PSV and RPI regional stack curves. The elaborated dataset, corroborated by available 14C ages, provides a fundamental chronological framework to constrain the coupling of shelf-slope sedimentary processes and environmental changes in the NW Barents Sea region during and after deglaciation.

Supercontinent break-up: Causes and consequences

NASA Astrophysics Data System (ADS)

Li, Z. X.

2014-12-01

Supercontinent break-up has most commonly been linked to plume or superplume events, and/or supercontinent thermal insulation, but precise mechanisms are yet to be worked out. Even less know is if and what roles other factors may play. Key factors likely include gravitational force due to the continental superswell driven by both the lower-mantle superplume and continental thermal insulation, mental convention driven by the superplume and individual plumes atop the superplume, assisted by thermal/magmatic weakening of the supercontinent interior (both plume heat and thermal insulation heat). In addition, circum-supercontinent slab downwelling may not only drive the formation of the antipodal superplumes (thus the break-up of the supercontinent), the likely roll-back of the subduction system would also create extension within the supercontinent, facilitating supercontinent break-up. Consequences of supercontinent break-up include long-term sea-level rise, climatic changes due to changes in ocean circulation pattern and carbon cycle, and biodiversification. It has long been demonstrated that the existence of the supercontinent Pangea corresponds to a long-term sea-level drop, whereas the break-up of the supercontinent corresponds to a long-term sea-level rise (170 m higher than it is today). A recent analysis of Neoproterozoic sedimentary facies illustrates that the time of Neoproterozoic supercontinent Rodinia corresponds to a low in the percentage of deep marine facies occurrence, whereas the time of Rodinia break-up corresponds to a significantly higher percentage of deep marine facies occurrence. The long-tern sea-level drop during supercontinent times were likely caused by both plume/superplume dynamic topography and an older mean age of the oceanic crust, whereas long-tern sea-level rise during supercontinent break-up (720-580 Ma for Rodinia and Late Jurassic-Cretaceous for Pangea) likely corresponds to an younger mean age of the oceanic crust, massive plume-induced magmatism in the oceans, and perhaps the effect of continents drifting away from a weakening sub-supercontinent superplume.

Glacimarine sedimentary processes, facies and morphology of the south-southeast Alaska shelf and fjords

USGS Publications Warehouse

Powell, R.D.; Molnia, B.F.

1989-01-01

High precipitation from Gulf of Alaska air masses can locally reach up to 800 cm a-1. This precipitation on tectonically active mountains creates cool-temperate glaciation with extremely active erosion and continuously renewed resources. High basal debris loads up to 1.5 m thick of pure debris and rapid glacial flow, which can be more than 3000 m a-1, combine to produce large volumes of siliciclastic glacimarine sediment at some of the highest sediment accumulation rates on record. At tidewater fronts of valley glaciers, sediment accumulation rates can be over 13 m a-1 and deltas commonly grow at about 106 m3 a-1. Major processes influencing glacimarine sedimentation are glacial transport and glacier-contact deposition, meltwater (subaerial and submarine) and runoff transport and deposition, iceberg rafting and gouging, sea-ice transport, wave action and storm reworking, tidal transport and deposition, alongshelf transport, sliding and slumping and gravity flows, eolian transport, and biogenic production and reworking. Processes are similar in both shelf and fjord settings; however, different intensities of some processes create different facies associations and geometries. The tectonoclimatic regime also controls morphology because bedrock structure is modified by glacial action. Major glacimarine depositional systems are all siliciclastic. They are subglacial, marginal-morainal bank and submarine outwash, and proglacial/paraglacial-fluvial/deltaic, beach, tidal flat/estuary, glacial fjord, marine outwash fjord and continental shelf. Future research should include study of long cores with extensive dating and more seismic surveys to evaluate areal and temporal extent of glacial facies and glaciation; time-series oceanographic data, sidescan sonar surveys and submersible dives to evaluate modern processes; biogenic diversity and production to evaluate paleoecological, paleobiogeographic and biofacies analysis; and detailed comparisons of exposed older rock of the Yakataga Formation to evaluate how glacial style has evolved over 6.3 Ma. ?? 1989.

3D architecture of cyclic-step and antidune deposits in glacigenic subaqueous fan and delta settings: Integrating outcrop and ground-penetrating radar data

NASA Astrophysics Data System (ADS)

Lang, Jörg; Sievers, Julian; Loewer, Markus; Igel, Jan; Winsemann, Jutta

2017-12-01

Bedforms related to supercritical flows are increasingly recognised as important constituents of many depositional environments, but outcrop studies are commonly hampered by long bedform wavelengths and complex three-dimensional geometries. We combined outcrop-based facies analysis with ground-penetrating radar (GPR) surveys to analyse the 3D facies architecture of subaqueous ice-contact fan and glacifluvial delta deposits. The studied sedimentary systems were deposited at the margins of the Middle Pleistocene Scandinavian ice sheets in Northern Germany. Glacifluvial Gilbert-type deltas are characterised by steeply dipping foreset beds, comprising cyclic-step deposits, which alternate with antidune deposits. Deposits of cyclic steps consist of lenticular scours infilled by backset cross-stratified pebbly sand and gravel. The GPR sections show that the scour fills form trains along the delta foresets, which can locally be traced for up to 15 m. Perpendicular and oblique to palaeoflow direction, these deposits appear as troughs with concentric or low-angle cross-stratified infills. Downflow transitions from scour fills into sheet-like low-angle cross-stratified or sinusoidally stratified pebbly sand, deposited by antidunes, are common. Cyclic steps and antidunes were deposited by sustained and surge-type supercritical density flows, which were related to hyperpycnal flows, triggered by major meltwater discharge or slope-failure events. Subaqueous ice-contact fan deposits include deposits of progradational scour fills, isolated hydraulic jumps, antidunes and (humpback) dunes. The gravel-rich fan succession consists of vertical stacks of laterally amalgamated pseudo-sheets, indicating deposition by pulses of waning supercritical flows under high aggradation rates. The GPR sections reveal the large-scale architecture of the sand-rich fan succession, which is characterised by lobe elements with basal erosional surfaces associated with scours filled with backsets related to hydraulic jumps, passing upwards and downflow into deposits of antidunes and (humpback) dunes. The recurrent facies architecture of the lobe elements and their prograding and retrograding stacking pattern are interpreted as related to autogenic flow morphodynamics.

Structural analysis and shape-preferred orientation determination of the mélange facies in the Chañaral mélange, Las Tórtolas Formation, Coastal Cordillera, northern Chile

NASA Astrophysics Data System (ADS)

Fuentes, Paulina; Díaz-Alvarado, Juan; Fernández, Carlos; Díaz-Azpiroz, Manuel; Rodríguez, Natalia

2016-04-01

This study sheds light on the tectonic and structural knowledge of the mélange facies located to the south of Chañaral city, Chile. The Chañaral mélange has been related to an accretionary prism at the western active continental margin of Gondwana. Based on the fossil content, the original turbidite sequence would have been deposited during Devonian to Carboniferous times. The Chañaral mélange is included in the Las Tórtolas Formation, which corresponds to the Paleozoic metasedimentary basement located in the Coastal Range in northern Chile. It consists of a monotonous sequence of more than 90% of interbedded sandstones and shales, with a few limestones, pelagic chert, conglomerates and basic volcanic rocks, metamorphosed to the greenschist facies. In the study area, the Las Tórtolas Formation is divided into two structural domains separated by a major reverse dextral structure, called here the Infieles fault. To the east, the Las Tórtolas Formation is characterized by a brittle-ductile deformation, defined by the original sedimentary contacts in the turbiditic sequence. Besides, thrust faults and associated thrust propagation folds promotes a penetrative axial plane foliation. Mélange facies are located to the west of the Infieles fault. Although lithologies comprising this domain are similar to the rest of the Las Tórtolas Formation, mélange facies (ductile domain) are characterized by the complete disruption of the original architecture of the turbidite succession. The most significant structures in the mélange are the ubiquitous boudinage and pinch and swell structures, asymmetric objects, S-C structures and tight to isoclinal folds. This deformation is partitioned in the Chañaral mélange between linear fabric domains (L), characterized by quartzite blocks with prolate shape in a phyllite matrix with pencil structures, and linear-planar fabric domains (L-S), where quartzite objects show oblate shape and phyllites present a penetrative foliation. The intensity of deformational process is reflected in the high aspect ratios yielded by the quartzite constrictive (L) and flattened (L-S) object axes. Meso-scale shape preferred orientation (SPO) has been compared with quartz microtextures in quartzite blocks, resulting aspect ratios considerably lower than those obtained from the mesoscopic fabric. Main deformation mechanism observed in quartz microtextures are bulging-subgrain rotation recrystallization and dissolution-precipitation creep for pure and impure quartzites respectively. The temperatures deduced from these microtextures are between 350 and 400 °C, which coincides with the greenschists facies metamorphism observed in the Las Tórtolas and the mélange facies. Extremely dissociation between micro- and meso-scale deformation could be generated by dissolution at high differential stress in the boundaries of the quartzite layers and precipitation at low differential stress parts, which would increase the aspect ratio of the lenses whereas internally, quartz would have remained virtually unstrained. We propose here a tectonic setting for the Chañaral mélange formation based on the geodynamic evolution of the western active margin of South America during Late Paleozoic to Early Jurassic. Thus, the study area is located in a LT-HP zone of an accretionary complex, where rocks from the subduction channel (mélange facies) and the basal domain of the prism (brittle-ductile domain of the Las Tórtolas Formation) are in contact through the Infieles fault.

Regional hydrogeology of the Navajo and Hopi Indian reservations, Arizona, New Mexico, and Utah, with a section on vegetation

USGS Publications Warehouse

Cooley, M.E.; Harshbarger, J.W.; Akers, J.P.; Hardt, W.F.; Hicks, O.N.

1969-01-01

The Navajo and Hopi Indian Reservations have an area of about 25,000 square miles and are in the south-central part of the Colorado Plateaus physiographic province. The reservations are underlain by sedimentary rocks that range in age from Cambrian to Tertiary, but Permian and younger rocks are exposed in about 95 percent of the area. Igneous and metamorphic basement rocks of Precambrian age underlie the sedimentary rocks at depths ranging from 1,000 to 10,000 feet. Much of the area is mantled by thin alluvial, eolian, and terrace deposits, which mainly are 10 to 50 feet thick.The Navajo country was a part of the eastern shelf area of the Cordilleran geosyncline during Paleozoic and Early Triassic time and part of the southwestern shelf area of the Rocky Mountain geosyncline in Cretaceous time. The shelf areas were inundated frequently by seas that extended from the central parts of the geosynclines. As a result, complex intertonguing and rapid facies changes are prevalent in the sedimentary rocks and form some of the principal controls on the ground-water hydrology. Regional uplift beginning in Late Cretaceous time , destroyed. the Rocky Mountain geosyncline and formed the structural basius that influenced sedimentation and erosion throughout Cenozoic time.

Graphite-(Mo,W)S2 intergrowth as a palaeoenvironmental proxy in metasedimentary rocks

NASA Astrophysics Data System (ADS)

Cabral, Alexandre Raphael; Zeh, Armin; da Silva Viana, Nívea Cristina; Schirmer, Thomas; Lehmann, Bernd

2017-12-01

Molybdenum enrichment in pristine organic-C-rich sedimentary rocks forms the basis for inferring the presence of dissolved oxygen in seawater. Organic matter removes dissolved hexavalent Mo from seawater where anoxic and euxinic conditions are attained. However, it is unknown whether this Mo-based proxy is retained under metamorphic conditions where organic C is no longer preserved. Here, we describe aggregates of graphite and molybdenite (MoS2) containing up to 21 mass per cent of W as tungstenite (WS2) in solid solution. These aggregates are disseminated in a sulfide-rich Mn-silicate-carbonate rock (queluzite), metamorphosed under amphibolite-facies conditions within the Archaean Barbacena greenstone belt in Minas Gerais, Brazil. Our finding indicates that: (i) W is, like Mo, a palaeoenvironmental proxy; (ii) the W proxy is sensitive to high fS2/fO2 environments; (iii) both Mo and W proxies survive amphibolite-facies overprint as (Mo,W)S2 intergrown with graphite. Archaean greenstones are potential candidates for storing palaeoenvironmental information as (Mo,W)S2-graphite intergrowths.

Geochemistry of Precambrian carbonates: 3-shelf seas and non-marine environments of the Archean

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veizer, J.; Clayton, R.N.; Hinton, R.W.

1990-10-01

A comprehensive whole-rock study of mineralogical, chemical, and isotopic attributes of Archean carbonates suggests that their lithologies and facies have been controlled by tectonic setting. In the first two papers of this series they have shown that the dominant lithology of sedimentary carbonates in greenstone belt settings is limestone. In this paper the authors suggest that the Archean shelf sequences are mostly dolostone, and the contemporaneous lacustrine playa lakes are characterized by limestone facies. The present study is of the shelf environments of the Archean, represented by the Pongola Supergroup of South Africa and the Hamersley Group of Australia. Themore » lacustrine playa examples have been sampled from the Ventersdorp Supergroup of South Africa and the Fortescue Group of Australia. Geological, trace element, and oxygen isotope considerations of the shelf carbonates suggest that their original mineralogy may have been aragonite and that the Pongola dolostones probably represent a direct dolomitization product of this precursor. In contrast, the stabilization of the Hamersley carbonates may have involved an additional step of transformation of a metastable precursor into limestone prior to dolomitization.« less

Biostratigraphic sequence analysis of two Lower Miocene to Pliocene sections, Eastern Falcon, Northwestern Venezuela

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diaz De Gamero, M.L.; Giffuni, G.; Castro Mora, M.

1993-02-01

The eastern region of the Falcon Basin in northwestern Venezuela comprises a thick sedimentary sequence deposited from a deep marine bathyal to neritic environment, ranging in age from the Middle Eocene to the Pliocene. A detailed biostratigraphic study (foraminifera and calcareous nannoplankton) was carried out in two sedimentary sequences outcropping in Cumarebo and Piritu, adjacent areas of eastern Falcon, representing: platform, slope and basinal settings. The Cumarebo section is continuous in the studied interval, from the Middle Miocene to the Pliocene. The Piritu section is continuous from the Lower to the lower Upper Miocene, terminating unconformably beneath a thin intervalmore » of middle Pliocene platform sediments, indicating tectonism during the latest Miocene. The sequence stratigraphical interpretation was based on the biostratigraphic analysis of the benthic and planktonic fossils, facies distribution and sedimentological data. Systems tracts, sequence boundaries and maximum flooding surfaces from cycles TB2.4 to TB3.5 of the cycle chart were identified. In the Cumarebo section, the upper Middle and Upper Miocene is mostly composed of shales, with some turbiditic sands belonging to a LSW system tract. The upper most Miocene contains a thick carbonate buildup (HST), and it is overlain by a Pliocene section that shallows upward from upper slope to outer shelf depositional environments. In the basinal (Piritu) section, most of the sediments are deep-water shales belonging to a LSW system tract, with some turbiditic sands in the upper Lower Miocene. TST and HST sediments, with scattered carbonate buildups in the upper Middle Miocene were also identified.« less

Seismic stratigraphy, tectonics and depositional history in the Halk el Menzel region, NE Tunisia

NASA Astrophysics Data System (ADS)

Sebei, Kawthar; Inoubli, Mohamed Hédi; Boussiga, Haïfa; Tlig, Said; Alouani, Rabah; Boujamaoui, Mustapha

2007-01-01

In the Halk el Menzel area, the proximal- to pelagic platform transition and related tectonic events during the Upper Cretaceous-Lower Miocene have not been taken into adequate consideration. The integrated interpretation of outcrop and subsurface data help define a seismic stratigraphic model and clarify the geodynamic evolution of the Halk el Menzel block. The sedimentary column comprises marls and limestones of the Campanian to Upper Eocene, overlain by Oligocene to Lower Miocene aged siliciclastics and carbonates. Well to well correlations show sedimentary sequences vary considerably in lithofacies and thicknesses over short distances with remarkable gaps. The comparison of sedimentary sequences cut by borehole and seismic stratigraphic modelling as well help define ten third order depositional sequences (S1-S10). Sequences S1 through S6 (Campanian-Paleocene) are mainly characterized by oblique to sigmoid configurations with prograding sedimentary structures, whereas, sequences S7-S10 (Ypresian to Middle Miocene) are organized in shallow water deposits with marked clinoform ramp geometry. Sedimentary discontinuities developed at sequence boundaries are thought to indicate widespread fall in relative sea level. Angular unconformities record a transpressive tectonic regime that operated from the Campanian to Upper Eocene. The geometry of sequences with reduced thicknesses, differential dipping of internal seismic reflections and associated normal faulting located westerly in the area, draw attention to a depositional sedimentary system developed on a gentle slope evolving from a tectonically driven steepening towards the Northwest. The seismic profiles help delimit normal faulting control environments of deposition. In contrast, reef build-ups in the Eastern parts occupy paleohighs NE-SW in strike with bordering Upper Maastrichtian-Ypresian seismic facies onlapping Upper Cretaceous counterparts. During the Middle-Upper Eocene, transpressive stress caused reactivation of faults from normal to reverse play. This has culminated in propagation folds located to the west; whereas, the eastern part of the block has suffered progressive subsidence. Transgressive carbonate depositional sequences have predominated during the Middle Miocene and have sealed pre-existing tectonic structures.

Tectono-metamorphic evolution of meta-ophiolitic units along Susa Valley (Italian Western Alps): new suggestions for the exhumation processes

NASA Astrophysics Data System (ADS)

Ghignone, Stefano; Borghi, Alessandro; Balestro, Gianni; Gattiglio, Marco

2017-04-01

In the inner Western Alps, meta-ophiolite units (i.e., the Piemonte Zone) show different stages of the tectono-metamorphic evolution, since the early phases of subduction to the latest exhumation steps. Tectono-metamorphic data collected through the meta-ophiolite units of the Piemonte Zone along the middle Susa Valley allowed to infer new ideas about the exhumation processes that developed in the (U)HP units. In this area, Zermatt-Saas-like meta-ophiolite unit (i.e., the eclogite-facies Internal Piemonte Zone, IPZ) are tectonically overlain by Combin-like ones (i.e., the blueschist-facies External Piemonte Zone, EPZ), through a thick shear zone (i.e., the Susa Shear Zone, SSZ). Metamorphic history was achieved by analyzing basic rocks (metabasalt and Fe-Ti metagabbro) and sedimentary rocks derived from reworking basic rocks in oceanic environment (basic sandstones and conglomerates, and ophiolitic breccia). Different P-T paths were inferred for IPZ and EPZ, according with mineral assemblages and realizations of pseudosections. In the IPZ, four tectono-metamorphic events, developed under variables metamorphic conditions, were recognized. The first (peak-P) event shows (U)HP conditions, defined by the occurrence of relic mineral assemblage (Grt I+ Omp I + Rt). The paragenesis is completed by Zo + Pg pseudomorphs, implying that Lws-eclogite facies were reached. The discovery in Grt (and Rt) relics inclusions of black euhedral pseudomorphs of disordered graphite, suggesting to be derived from original microdiamonds, agree with other petrologic constrains. The second event, marked by the Grt II + Omp II + Ph + Gln + Zo assemblage, developed under epidote-eclogite facies conditions. Following a retrograde and decompressional trajectory, the IPZ was then re-equilibrated under greenschist-facies conditions and a new assemblage (Ab + Chl + Mu + Czo + Ttn + Act) overprinted HP paragenesis. The last event is marked by a weak heating, with crystallization of Bt + Ep + Olig + Hbl (Prg) + Ms. The EPZ shows a different metamorphic evolution, where only two events were recognized. The first event developed under blueschist-facies conditions, with relics of mineral assemblages consisting of Gln + Rt + Ph. Then, a retrograde trajectory re-equilibrated EPZ under greenschist-facies conditions and a new stable mineral assemblage (Ab + Chl + Mu + Ttn + Act + Czo) grew. The inferred P-T path suggests, for the IPZ, a first isothermal exhumation stage, likely driven by buoyancy forces from the base of the orogenic wedge. In the EPZ, HP peak occurs at the same gradient of the second event in the IPZ, suggesting that, during exhumation of the IPZ, the EPZ was still subducted. The strong re-equilibration under greenschist-facies conditions suggests a stage of slow exhumation rate, which can be related to the coupling between IPZ and EPZ.

Depositional framework and sequence stratigraphic aspects of the Coniacian Santonian mixed siliciclastic/carbonate Matulla sediments in Nezzazat and Ekma blocks, Gulf of Suez, Egypt

NASA Astrophysics Data System (ADS)

El-Azabi, M. H.; El-Araby, A.

2007-04-01

Superb outcrops of mixed siliciclastic/carbonate rocks mark the Coniacian-Santonian Matulla Formation exposed in Nezzazat and Ekma blocks, west central Sinai. They are built up of various lithofacies that reflect minor fluctuations in relative sea-level from lower intertidal to slightly deep subtidal settings. Relying on the facies characteristics and stratal geometries, the siliciclastic rocks are divided into seven depositional facies, including beach foreshore laminated sands, upper shoreface cross-bedded sandstone, lower shoreface massive bioturbated and wave-rippled sandstones, shallow subtidal siltstone and deep subtidal shale/claystone. The carbonate rocks comprise lower intertidal lime-mudstone, floatstone and dolostone, shallow subtidal skeletal shoal of oyster rudstone/bioclastic grainstone, and shoal margin packstone. Oolitic grain-ironstone and ferribands are partially intervened the facies types. Deposition has taken place under varied conditions of restricted, partly open marine circulation, low to high wave energy and normal to raised salinity during alternating periods of abundant and ceased clastic supply. The facies types are arranged into asymmetric upward-shallowing cycles that record multiple small-scale transgressive-regressive events. Lime-mudstone and sandstone normally terminate the regressive events. Four sequence boundaries marking regional relative sea-level falls divide the Matulla Formation into three stratigraphic units. These boundaries are Turonian/Coniacian, intra-Coniacian, Coniacian/Santonian and Santonian/Campanian. They do not fit with those sequence boundaries proposed in Haq et al.'s global eustatic curves (1988) except for the sea-level fall associated with the intra-Coniacian boundary. Other sequence boundaries have resulted from regional tectonic impact of the Syrian Arc Fold System that has been initiated in north Egypt during the Latest Turonian-Coniacian. These boundaries enclose three well-defined 3rd order depositional sequences; their enclosing shallowing-upward cycles (i.e. parasequences) record the 4th order relative sea-level fluctuations. 34 and 20 parasequence sets, in the order of a few meters to tens of meters thick, mark the Matulla sequences in Nezzazat and Ekma blocks respectively. Each sequence shows an initial phase of rapid sea-level rise with retrogradational sets, followed by lowering sea-level and progradation/aggradation of the parasequence sets. The transgressive deposits display predominance of deep subtidal lagoonal facies, while highstand deposits show an increase in siliciclastic and carbonate facies with the progressive decrease of lagoonal facies. The sedimentary patterns and environments suggest that the regional, partly eustatic sea-level (i.e. intra-Coniacian) changes controlled the overall architecture of the sequence distribution, whereas changes in the clastic input controlled the variations in facies associations within each depositional sequence.

An integrated workflow to assess the remaining potential of mature hydrocarbon basins: a case study from Northwest Germany (Upper Jurassic/Lower Cretaceous, Lower Saxony Basin)

NASA Astrophysics Data System (ADS)

Seyfang, Björn; Aigner, Thomas; Munsterman, Dirk K.; Irmen, Anton

2017-04-01

Mature hydrocarbon provinces require a high level of geological understanding in order to extend the lives of producing fields, to replace reserves through smaller targets and to reduce the risks of exploring for more and more subtle hydrocarbon traps. Despite a large number of existing wells in the area studied in this paper, the depositional environments and the stratigraphic architecture were still poorly known. In order to improve the geological understanding, we propose a workflow to assess the remaining reservoir potential of mature hydrocarbon areas, integrating cores, cuttings, well-logs, biostratigraphy and seismic data. This workflow was developed for and is exemplified with the northwest of the Lower Saxony Basin (LSB), a mature hydrocarbon province in northwest Germany, but can be applied in a similar fashion to other areas. Systematic integration of lithofacies analysis, chrono- and sequence stratigraphy, combined with electrofacies analysis and modern digital methods like neural network-based lithology determination and 3D facies modelling provides a high-resolution understanding of the spatial facies and reservoir architecture in the study area. Despite widely correlatable litho-units in the Upper Jurassic and Lower Cretaceous in the LSB, complex heterogeneous sedimentary systems can be found in the basin's marginal parts. Two new play types were determined in the study area, showing a remaining potential for stratigraphic hydrocarbon traps. The results of this exploration scale study also provide the basis for re-evaluations on a field development scale. On a basin scale, this study may encourage further data acquisition and re-evaluations to discover previously unknown reservoirs.

Zircon (Hf, O isotopes) as melt indicator: Melt infiltration and abundant new zircon growth within melt rich layers of granulite-facies lenses versus solid-state recrystallization in hosting amphibolite-facies gneisses (central Erzgebirge, Bohemian Massif)

NASA Astrophysics Data System (ADS)

Tichomirowa, Marion; Whitehouse, Martin; Gerdes, Axel; Schulz, Bernhard

2018-03-01

In the central Erzgebirge within the Bohemian Massif, lenses of high pressure and ultrahigh pressure felsic granulites occur within meta-sedimentary and meta-igneous amphibolite-facies felsic rocks. In the felsic granulite, melt rich parts and restite form alternating layers, and were identified by petrology and bulk rock geochemistry. Mineral assemblages representing the peak P-T conditions were best preserved in melanocratic restite layers. In contrast, in the melt rich leucocratic layers, garnet and related HP minerals as kyanite are almost completely resorbed. Both layers display differences in accessory minerals: melanosomes have frequent and large monazite and Fe-Ti-minerals but lack xenotime and apatite; leucosomes have abundant apatite and xenotime while monazite is rare. Here we present a detailed petrographic study of zircon grains (abundance, size, morphology, inclusions) in granulite-facies and amphibolite-facies felsic gneisses, along with their oxygen and hafnium isotope compositions. Our data complement earlier Usbnd Pb ages and trace element data (REE, Y, Hf, U) on zircons from the same rocks (Tichomirowa et al., 2005). Our results show that the degree of melting determines the behaviour of zircon in different layers of the granulites and associated amphibolite-facies rocks. In restite layers of the granulite lenses, small, inherited, and resorbed zircon grains are preserved and new zircon formation is very limited. In contrast, new zircons abundantly grew in the melt rich leucocratic layers. In these layers, the new zircons (Usbnd Pb age, trace elements, Hf, O isotopes) best preserve the information on peak metamorphic conditions due to intense corrosion of other metamorphic minerals. The new zircons often contain inherited cores. Compared to cores, the new zircons and rims show similar or slightly lower Hf isotope values, slightly higher Hf model ages, and decreased oxygen isotope ratios. The isotope compositions (Hf, O) of new zircons indicate partial Hf isotope homogenization in the melt, and melt infiltration from an external source. New zircon was most likely formed by a peritectic reaction with melt above the wet solidus (peritectic zircon). Conversely, the amphibolite-facies host gneisses lack indications of significant melt production. Pre-metamorphic zircons experienced mainly solid-state recrystallization and variable Pb loss with only minor new zircon formation. However, subtle changes in cathodoluminescence pattern, in the Hf and O isotopes, and in the Lu/Hf, Yb/Hf ratios of zircons suggest that small volumes of melt were locally present. In difference to granulites, melt was internally produced. The detection of low degree melts (inferred from zircon geochemistry) is extremely important for the rheology because these amphibolite-facies rocks could act as large scale ductile shear zones. The new zircon data support a different P-T path for closely spaced amphibolite- and granulite-facies rocks.

Carbonate apron models: Alternatives to the submarine fan model for paleoenvironmental analysis and hydrocarbon exploration

USGS Publications Warehouse

Mullins, H.T.; Cook, H.E.

1986-01-01

Sediment gravity flow deposition along the deep-water flanks of carbonate platforms typically does not produce submarine fans. Rather, wedge-shaped carbonate aprons develop parallel to the adjacent shelf/slope break. The major difference between submarine fans and carbonate aprons is a point source with channelized sedimentation on fans, versus a line source with sheet-flow sedimentation on aprons. Two types of carbonate aprons may develop. Along relatively gentle (< 4??) platform-margin slopes, aprons form immediately adjacent to the shallow-water platform and are referred to as carbonate slope aprons. Along relatively steep (4-15??) platform margin slopes, redeposited limestones accumulate in a base-of-slope setting, by-passing an upper slope via a multitude of small submarine canyons, and are referred to as carbonate base-of-slope aprons. Both apron types are further subdivided into inner and outer facies belts. Inner apron sediments consist of thick, mud-supported conglomerates and megabreccias (Facies F) as well as thick, coarse-grained turbidites (Facies A) interbedded with subordinate amounts of fine-grained, peri-platform ooze (Facies G). Outer apron sediments consist of thinner, grain-supported conglomerates and turbidites (Facies A) as well as classical turbidites (Facies C) with recognizable Bouma divisions, interbedded with approximately equal proportions of peri-platform ooze (Facies G). Seaward, aprons grade laterally into basinal facies of thin, base-cut-out carbonate turbidites (Facies D) that are subordinate to peri-platform oozes (Facies G). Carbonate base-of-slope aprons grade shelfward into an upper slope facies of fine-grained peri-platform ooze (Facies G) cut by numerous small canyons that are filled with coarse debris, as well as intraformational truncation surfaces which result from submarine sliding. In contrast, slope aprons grade shelfward immediately into shoal-water, platform-margin facies without an intervening by-pass slope. The two carbonate apron models presented here offer alternatives to the submarine-fan model for paleoenvironmental analysis and hydrocarbon exploration for mass-transported carbonate facies. ?? 1986.

Northernmost Known Outcrop in North America of Lower Cretaceous Porphyritic Ocoite Facies (Ocoa, Chile) at Western Mexico: the Talpa Ocoite

NASA Astrophysics Data System (ADS)

Zárate-del Valle, P. F.; Demant, A.

2003-04-01

At Talpa de Allende region in Western Mexico is located the northernmost known outcrop of ocoite facies (andesite): the Talpa ocoite (TO). The ocoite facies consists of an calk-alkaline andesitic rock rich in K and characterized by the presence of megacrysts of plagioclase (An48-65). TO belongs to the so-called Guerrero Terrane composed of plutono-volcanic and volcano-sedimentary sequences of the Alisitos-Teloloapan arc that was accreted to the North American craton at the end of the early Cretaceous (Lapierre et al., 1992, Can. J. Earth Sci. 29. 2478--2489). Geodynamically TO belongs to lithological sequence number IV or "Tecoman" of Tardy et al. (1994, Tectonophysics 230, 49--73). TO in hand-sample shows typical megacrysts (>1 cm) of plagioclase and clinopyroxene in a dark green aphanitic matrix. This andesitic lava has a shoshonitic character as evidenced by chemical composition: SiO_2 TiO_2 Al_2O_3 Fe_2O_3 MnO MgO CaO Na_2O K_2O P_2O_5 LOI % Ba Sr (ppm) 55.64 0.73 16.61 8.39 0.13 3.59 6.40 3.55 2.85 0.36 1.84% 1093 880 Under microscope TO is characterized by a porphyritic texture made of large labradorite phenocrysts (up to 3 cm) and clinopyroxene with a matrix made of plagioclase microlites; TO has been affected by a low grade metamorphism process belonging to the prehnite-pumpellite facies as it happens in Chile (Levi, 1969, Contr. Mineral. and Petrol. 24-1, p. 30--49). Electron microprobe analysis shows that plagioclase (An55-57) is partly transformed into albite (An7-9); clinopyroxene shows a variation in composition from Wo33En41Fs17 to Wo40En44Fs24 and it is transformed towards the margin first into amphibole and then into biotite. TO outcrops located at East of Talpa river are affected by a deep rubefaction process. TO is not characterized by the presence of bitumen as it occurs in Northern Chile (Nova-Muñoz et al., 2001, EUG XI Meeting, OS09 Supo09 PO, 606); TO is related in time with albian-cenomanian volcanogenic massive sulphides of Western Mexico: La América and El Rubí mines.

Cenozoic evolution of the Socotra Island: opening of the Gulf of Aden

NASA Astrophysics Data System (ADS)

Razin, P.; Robin, C.; Serra Kiel, J.; Leroy, S.; Bellahsen, N.; Khanbari, K.

2009-12-01

A complete stratigraphic and geological map revision of the Tertiary of Socotra Island is undertaken in order to better characterize the geometry and the tecto-sedimentary evolution of the southern margin of the Gulf of Aden, and compare them with those of the conjugate northern margin in Oman. An increase of the rate of subsidence is recorded during the Late Eocene and is associated with a transgressive peak within carbonate platform deposits (Aydim Fm.). At the scale of the Arabian plate, the extent of this platform is reduced to the future rift area. This evolution of the platform system shows a modification of the sedimentary profiles, controlled by the beginning of the rifting. The syn-rift deposits of the Early Oligocene correspond to sub-reef carbonate platform facies (Ashawq Fm.). First, the throw of synsedimentary faults and the movements linked with differential subsidence are widely compensated by carbonate production which manages to maintain a platform profile. These movements are recorded by thickness variations, significant lateral variations in the platform facies and by a local inversion of sedimentary polarities controlled by the tilting of faulted blocks. Like on the northern margin, an acceleration of the extension process leads, during the Late Oligocene, to a collapse of the platform and to the creation of deep sub-basins with carbonate gravity-flow sedimentation. Marginal reef platforms keep growing at this stage on the structural highs and feed gravity-flow sedimentary systems. The sedimentation rate stays then relatively low in the basin, forming a complex topography of the margin, marked by a segmentation into numerous sub-basins more or less connected and separated by submarine escarpments marked by wedges of breccia deposits along active normal faults. In different points, these faults are sealed by sedimentary deposits characterized by progressive unconformities and onlap geometries on the fault escarpments. These geometries show the relatively short length of the phase of « stretching » of the continental crust. Around the end of the Early Miocene, the progradation of conglomerate fan-delta deposits locally results in the fill of the basins and shows a major phase of uplift. It is very rapidly followed by a new phase of subsidence which allows the preservation of thick fan-delta and equivalent reef platform complex unconformably overlying different units of the syn-rift and pre-rift sequences, or even the exhumed Proterozoic basement. This tectonic-sedimentary phase is interpreted as synchronous to the continental breakup and the onset of the OCT at the foot of the margin. The analogy with the phase of development of «sag basins» on the Atlantic margins has to be analyzed. This major uplift at the transition syn-rift/post-rift seems to be expressed symmetrically on both margins. These syn-OCT deposits are then uplifted and affected by late tilting events. However, the most recent deposits, probably Late Miocene to plio-Quaternary in age, have only been affected by small uplifts, unlike those of the Dhofar on the northern margin

Sedimentology and paleoecology of an Eocene Oligocene alluvial lacustrine arid system, Southern Mexico

NASA Astrophysics Data System (ADS)

Beraldi-Campesi, Hugo; Cevallos-Ferriz, Sergio R. S.; Centeno-García, Elena; Arenas-Abad, Concepción; Fernández, Luis Pedro

2006-10-01

A depositional model of the Eocene-Oligocene Coatzingo Formation in Tepexi de Rodríguez (Puebla, Mexico) is proposed, based on facies analysis of one of the best-preserved sections, the Axamilpa Section. The sedimentary evolution is interpreted as the retrogradation of an alluvial system, followed by the progressive expansion of an alkaline lake system, with deltaic, palustrine, and evaporitic environments. The analysis suggests a change towards more arid conditions with time. Fossils from this region, such as fossil tracks of artiodactyls, aquatic birds and cat-like mammals, suggest that these animals traversed the area, ostracods populated the lake waters, and plants grew on incipient soils and riparian environments many times throughout the history of the basin. The inferred habitat for some fossil plants coincides with the sedimentological interpretation of an arid to semiarid climate for that epoch. This combined sedimentological-paleontological study of the Axamilpa Section provides an environmental context in which fossils can be placed and brings into attention important biotic episodes, like bird and camelid migrations or the origin of endemic but extinct plants in this area.

Regional metamorphism in the Condrey Mountain Quadrangle, north-central Klamath Mountains, California

USGS Publications Warehouse

Hotz, Preston Enslow

1979-01-01

A subcircular area of about 650 km 2 in northern California and southwestern Oregon is occupied by rocks of the greenschist metamorphic facies called the Condrey Mountain Schist. This greenschist terrane is bordered on the east and west by rocks belonging to the amphibolite metamorphic facies that structurally overlie and are thrust over the Condrey Mountain Schist. The amphibolite facies is succeeded upward by metavolcanic and metasedimentary rocks belonging to the greenschist metamorphic facies. The Condrey Mountain Schist is composed predominantly of quartz-muscovite schist and lesser amounts of actinolite-chlorite schist formed by the metamorphism of graywacke and spilitic volcanic rocks that may have belonged to the Galice Formation of Late Jurassic age. Potassium-argon age determinations of 141?4 m.y. and 155?5 m.y. obtained on these metamorphic rocks seem to be incompatible with the Late Jurassic age usually assigned the Galice. The rocks that border the amphibolite facies are part of an extensive terrane of metavolcanic and metasedimentary rocks belonging to the western Paleozoic and Triassic belt. The metavolcanic rocks include some unmetamorphosed spilite but are mostly of the greenschist metamorphic facies composed of oligoclase (An15-20) and actinolite with subordinate amounts of chlorite and clinozoisiteepidote. The interbedded sedimentary rocks are predominantly argillite and slaty argillite, less commonly siliceous argillite and chert, and a few lenticular beds of marble. On the south, high-angle faults and a tabular granitic pluton separate the greenschist metavolcanic terrane from the amphibolite facies rocks; on the east, nonfoliated amphibolite is succeeded upward, apparently conformably, by metasedimentary rocks belonging to the greenschist metavolcanic terrane. In the southern part of Condrey Mountain quadrangle, an outlier of a thrust plate composed of the Stuart Fork Formation overlies the metavolcanic and metasedimentary rocks. The Stuart Fork in this region is composed of siliceous phyllite and phyllitic quartzite and is believed to be the metamorphosed equivalent of rocks over which it is thrust. In the Yreka-Fort Jones area, potassium-argon determinations on mica from the blueschist facies in the Stuart Fork gave ages of approximately 220 m.y. (Late Triassic) for the age of metamorphism. Rocks of the amphibolite facies structurally overlie the Condrey Mountain Schist along a moderate to steeply dipping thrust fault. The amphibolite terrane is composed of amphibolite and metasedimentary rocks in approximately equal amounts accompanied by many bodies of serpentinite and a number of gabbro and dioritic plutons. Most of the amphibolite is foliated, but some is nonfoliated; the nonfoliated amphibolite has an amphibolite mineralogy and commonly a relict volcanic rock texture. The nonfoliated amphibolite occurs on the southern and eastern borders of the amphibolite terrane between the areas offoliated amphibolite and the overly ing metavolcanic and metasedimentary rocks. Hornblende and plagioclase (An30-35) are the characteristic minerals, indicating that the rocks are of the almandine-amphibolite metamorphic facies. The metasedimentary rocks interbedded with the amphibolites include siliceous schist and phyllite, minor quartzite, and subordinate amounts of marble. Potassium-argon age dates obtained on hornblende from foliated amphibolite yield ages of 146?4 and 148? 4 m.y., suggesting a Late Jurassic metamorphic episode. Mafic and ultramafic rocks are widespread in the amphibolite terrane but are almost entirely absent from the area of greenschist facies metavolcanic and metasedimentary rocks. The ultramafic rocks, predominantly serpentinite, occur as a few large bodies and many small tabular concordant bodies interleaved with the foliated rocks. The ultramafic rocks include harzburgite and d1lIlite and their serpentinized equivalents. In the Condrey Mountain quadrangle, probably more t

A mixed carbonate/clastic example in a restricted bay in a temperate carbonate shelf (Cala Fornells, northern Minorca Spain)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fornos, J.J.; Forteza, V.; Jaume, C.

1990-05-01

Cala Fornells is a restricted bay located in the northern section of the island Minorca. Cala Fornells has a surface area of 4 km{sup 2} and a maximum depth of 25 m at the mouth, which connects with the northern Minorca platform. Due to ephemeral streams with very fine textural inflow, the sedimentary facies present in the floor of the bay are primarily controlled by the bioclastic carbonate ecosystem production and the terrigenous input. The distribution of the facies is related to three major factors: (1) bathymetry, which controls the ecosystem distribution (Cymodocea nodosa-Caulerpa prolifera, Posidonia oceanica, and maeerl communities,more » from shallowest to deepest); (2) hydrodynamic conditions due to northern winds (locally called Tramuntana), which control the grain size distribution; and (3) local ephemeral streams, which control the terrigenous input. In the coarser fractions of the sediment (gravel and sand), the main component in the deepest zones are skeletal fragments of red algae. The shallowest zones contain fragments of the green alga Halimeda tuna, which may represent up to 50% of the total bioclastic fraction. The terrigenous components are mostly shales and only locally do they find a sand fragment of limestone and quartz grains. The organic matter content is very high (over 6% in the finest fractions), whereas in the more hydrodynamic and deeper facies (25 m) where the bioclastic fractions are predominant, the organic carbon content is below 0.5%.« less

The Eastern delta-fan deposits on the Granada Basin as tectonic indicators of the Sierra Nevada uplift (Betic Cordillera, South Spain)

NASA Astrophysics Data System (ADS)

Roldán, Francisco Javier; Azañon, Jose Miguel; Mateos, Rosa Maria

2014-05-01

A geological mapping in detail of the Eastern sector of the Granada Basin (South Spain) reveals two different groups of Gilbert delta-fans related to the Sierra Nevada uplift. The first group, in the southern part and with a surface of 6 km2, has three major coarsening-upward sequences. They are composed of very coarse deposits, those of conglomerates, sands and silts. Progradational strata units to the basin have been observed. The dominantly fluvial facies association has locally developed shallow marine foreset deposits (partially with reef colonization) as well as topset red soils (Dabrio, et al., 1978; Braga et a., 1990; García-García, et al., 1999) . All the sequences are discordant over marine facies (calcarenites) dated over 8,26 Ma (Late Tortonian). The second group, in the northern part and with an extension of 12 km2, has similar characteristics, but some of the boulders have ostreids and lamellibranchs species which reveal their former position in a previous marine environment. The Sierra Nevada uplift caused the remobilization of these boulders, being transported by debris-flow inside the delta-fan bodies (García-García, et al., 2006). The dating of ostreids shells with Sr techniques reveals ages over 7,13, 6,61 and 5,45 Ma, from the lower to the upper delta-fan deposits, which are related to the three main sequences observed and with three major tectonic pulses during the Late Miocene. These interpretations are in agreement with apatite fision-track studies carried out in some boulders of these coarse delta-fan deposits (Clark and Dempster, 2013). They reveal a detailed record of Neogene denudation from the Sierra Nevada basement and with uplift periods between 5,45Ma- 2 Ma. The latest pulses affected the delta-fan sediments given rise to new fan systems in the Granada Basin (Alhambra Formation). The thoroughly study of the Miocene delta-fan sediments allows us to conclude that they were related to a sin-sedimentary tectonic activity linked to the Sierra Nevada uplift and with original NE-SW normal left-lateral fault system associated with a compatible ESE-WNW normal fault system. The asymmetrical morphologies of the two delta-fan bodies confirm this configuration as tectonic induced deposits. References Braga, J.C., Martín, J.M. and Alcalá, B. (1990). Coral reefs in coarse-terrigenous sedimentary environments (Upper Tortonian, Granada Basin, southern Spain). Sedimentary Geology, 66, pp 135-150. Clark, S.J.P.and Dempster, T.J. (2009). The record of tectonic denudation and erosion in an emerging orogen: an apatite fission-track study of the Sierra Nevada, southern Spain. Journal of the Geological Society, London, Vol. 166, pp. 87-100. Dabrio, C.J., Fernández, J., Peña, J., Ruíz-Bustos, A. y Sanz de Galdeano, C. (1978). Rasgos sedimentarios de los conglomerados miocénicos del borde noreste de la Depresión de Granada. Estudios Geológicos, 34, pp 89-97. García-García, F., Fernández, J., Viseras, C. and Soria, J.M. (2006). Architecture and sedimentary facies evolution in a delta stack controlled by fault growth (Betic Cordillera, southern Spain, late Tortonian). Sedimentary Geology, 185, pp. 79-92. García-García, F., Viseras, C. and Fernández, J. (1999). Organización secuencial de abanicos deltaicos controlados por la tectónica (Tortoniense superior, cuenca de Granada, Cordillera Bética). Rev. Soc. Geol. España, 12 (2): 199-208.

A note on coarse-grained gravity-flow deposits within proterozoic lacustrine sedimentary rocks, Transvaal sequence, South Africa

NASA Astrophysics Data System (ADS)

Eriksson, P. G.

A widely developed, thin, coarse-matrix conglomerate occurs within early Proterozoic lacustrine mudrocks in the Transvaal Sequence, South Africa. The poorly sorted tabular chert clasts, alternation of a planar clast fabric with disorientated zones, plus normal and inverse grading in the former rock type suggest deposition by density-modified grain-flow and high density turbidity currents. The lower fan-delta slope palæenvironment inferred for the conglomerate is consistent with the lacustrine interpretation for the enclosing mudrock facies. This intracratonic setting contrasts with the marine environment generally associated with density-modified grain-flow deposits.

Disentangling Holocene lake level changes with a transect of lake sediment cores - a case study from Lake Fürstenseer See, northeastern Germany

NASA Astrophysics Data System (ADS)

Dietze, Elisabeth; Slowinski, Michal; Kienel, Ulrike; Zawiska, Izabela; Brauer, Achim

2014-05-01

Deciphering the main processes contributing to lake and landscape evolution in the northern central European lowlands on different temporal scales is one of the main targets of the Virtual Institute of Integrated Climate and Landscape Evolution Analysis (ICLEA) of the Helmholtz Association. In the context of future climatic changes especially the hydrological system is a vulnerable landscape component that showed considerably large changes in the recent past. The analysis of lake sediment archives can help to infer long-term dynamics of regional lake and groundwater levels, although available proxy information needs to be studied carefully, as water level changes are only one trigger. Lake Fürstenseer See (53°19'N, 13°12'E, lake level in 2009: 63.3 m a.s.l.) formed after the retreat of the Weichselian ice sheet in a subglacial channel in the direct forefront of the Pommerian ice margin. The ~2 km2 large lake (zmax = 24.5 m) has a (sub-) surficial catchment area of ~(20) 40 km2 including other smaller lakes and peatlands. In the past, the lake system was artificially dammed for the operation of water mills. Located within the well-drained sandur substrate, the lake levels vary with groundwater levels in response to hydrological and catchment-related groundwater recharge. Detrital matter input from fluvial activity can be excluded. Lake sediment cores at four sites along a transect down to 23 m water depth show distinct sediment facies patterns. Stratigraphic descriptions and non-destructive continuous micro-XRF scanning allowed the differentiation of the main sediment facies, which were microscopically described using thin sections. Quantification of total organic and inorganic matter (TOC, TIC, C/N-composition) and discontinuous macrorest, diatom and Cladocera analysis helped to approach the sedimentation history. Stable isotopes of (delta-180, delta-13C) were used for characterization of carbonates. A high amount of non-reworked terrestrial plant remains from prominent facies shifts were dated with AMS-14C and allowed to link the different cores, assess individual sedimentation rates and to evaluate sediment focusing in the lake. Carbonatic and organic gyttjas are the main sedimentary components related mainly to authigenic production. Sometimes, carbonates show detrital mineral structures and correlations with allochthonous components (K, Ti, Si) that can only be provided by reworking of shore and slope material or in times of intense aeolian transport. Sandy facies dominate only at near-shore, steep sites and form distinct layers at the current sediment limit. A robust statistical analysis considering compositional data constraints allows an objective compilation of indications for lake level change from water depth-related habitat changes and shore erosion. They oppose detrital matter input from aeolian processes in times of anthropogenically-cleared forests. A first lake level reconstruction from the Early Holocene to recent times will be presented and linked to climatic and/or anthropogenic drivers of regional hydrological changes.

Reaction capacity characterization of shallow sedimentary deposits in geologically different regions of the Netherlands.

PubMed

Griffioen, Jasper; Klein, Janneke; van Gaans, Pauline F M

2012-01-01

Quantitative insight into the reaction capacity of porous media is necessary to assess the buffering capacity of the subsurface against contaminant input via groundwater recharge. Here, reaction capacity is to be considered as a series of geochemical characteristics that control acid/base conditions, redox conditions and sorption intensity. Using existing geochemical analyses, a statistical regional assessment of the reaction capacity was performed for two geologically different areas in the Netherlands. The first area is dominated by Pleistocene aquifer sediments only, in the second area a heterogeneous Holocene confining layer is found on top of the Pleistocene aquifer sediments. Within both areas, two or more regions can be distinguished that have a distinctly different geological build-up of the shallow subsurface. The reactive compounds considered were pyrite, reactive Fe other than pyrite, sedimentary organic matter, carbonate and clay content. This characterization was complemented by the analysis of a dataset of samples newly collected, from two regions within the Pleistocene area, where the sedimentary facies of samples was additionally distinguished. The statistical assessment per area was executed at the levels of region, geological formation and lithology class. For both areas, significant differences in reaction capacities were observed between: 1. different lithology classes within a geological formation in a single region, 2. identical geological formations in different regions and 3. various geological formations within a single region. Here, the reaction capacity is not only controlled by lithostratigraphy, but also by post-depositional diagenesis and paleohydrology. Correlation coefficients among the reactive compounds were generally higher for sand than for clay, but insufficiently high to allow good estimation of reactive compounds from each other. For the sandy Pleistocene aquifer sediments, the content of reactive compounds was frequently observed to be below detection limits. From this, future characterization of sediment reaction capacity is best performed at the sublevel of lithology class, being the geochemically near-uniform unit identifiable for individual geological formations within geographic regions. Additional subdivision on facies provides particular insight in the spatial entity where relatively high reaction capacities may be encountered. To obtain quantitative insight into the reaction capacity of aquifer sediments, non-sandy minor subunits should be well characterised on their reaction capacity as well as their spatial occurrence in the geological formations. A straightforward approach is presented in which the regional statistics on geochemical reactivity become combined with a 3-dimensional geological voxel model. This results into 3-dimensional data fields on reactivity, which are suitable for, for example, groundwater transport modelling. The sedimentological architecture of the deposits becomes well maintained in the geochemical data field, which is an advantage in itself. Copyright © 2011 Elsevier B.V. All rights reserved.

Giving perspective to cliff exposures with ground penetrating radar: Devonian lacustrine shore zone architecture

NASA Astrophysics Data System (ADS)

Andrews, Steven; Moreau, Julien; Archer, Stuart

2015-04-01

The orbitally-controlled cyclic lacustrine successions of the Middle Devonian in Northern Scotland contains repeated developments of shore zone sandstones. However, due to the cliff-forming nature of the succession and the attitude of the sections through these sandstones, interpretation of this facies has been problematic. To better understand the shore zone systems, we carried out very high resolution sedimentary logging and constructed photo-panels which were combined with high resolution GPR profiling (250 MHz). To ensure close ties between the sedimentary logs and the GPR data, the cliffs were accessed using rope access techniques while GPR grids were shot directly above. The profiles were shot mainly in the strike direction of what was thought to be the shore elongation every 5-10 m and every 20-30 m in the dip direction. Shore zone systems of 3 different sequences have been imaged for a total of 1155 m of GPR profile collected. This configuration has allowed 3D visualisation of the architecture of the shore zone systems and, in combination with detailed sedimentology, provided insights into the generation of the dynamic shore zone environments. The coastal cliffs of northern Scotland expose sedimentary cycles on average 16-m-thick which record deep lake, perennial lake and playa environments. The shore zone deposits reach 2 to 3.5 m in thickness. Loading and discrete channel forms are recognised in both the GPR data and sedimentary logs through the lower portion of the lake shore zone successions. Up-section the sandstone beds appear to become amalgamated forming subtle low angle accretionary bar complexes which although visible in outcrop, after careful investigation, can be fully visualised and examined in the GPR data. The 3D visualisation allowed mapping the architecture and distribution of the bars . The orientation of these features, recognised from the survey, is consistent with extensive palaeocurrent measurements from oscillation ripples. Further loaded sandstone beds and sand-filled shallow channel features overlie the bar forms. The channels are well imaged in the radargrams where their wider context can be gained. Through the combination of high resolution GPR data and detailed sedimentological analysis determination of the processes through which the previously enigmatic lake shore zone sandstones has been possible. The shore zone sandstones overlie playa facies which contain abundant desiccation horizons, reflecting the most arid phase in the climatically-controlled lacustrine cycle. As climatic conditions ameliorated the rejuvenation of fluvial systems resulted in the transport of sand out into the basin. Initial deposition was limited to intermittent events where sediment was laid down on a water saturated substrate. Some of these may have occurred subaqueously as small scale turbidity flows. High resolution fluctuations in lake level resulted in periodic short-lived reworking events along the lake margin which produced amalgamated sands, forming low relief bars. Shore zone reworking is likely to have occurred over a wide area as the lake margin migrated back and forth, and gradually transgressed. Continued transgression forced fluvial systems back towards the basin margin.

Environmental and ice volume changes based on seismic stratigraphy in Sabrina Coast, East Antarctica: Preliminary results from NBP1402

NASA Astrophysics Data System (ADS)

Gulick, S. P. S.; Fernandez-Vasquez, R. A.; Frederick, B.; Saustrup, S., Sr.; Domack, E. W.; Lavoie, C.; Shevenell, A.; Blankenship, D. D.; Leventer, A.

2014-12-01

In 2014, the R/V Nathaniel B. Palmer (NBP1402) sailed to a virtually unexplored continental shelf along the Sabrina Coast, East Antarctica. The shelf contains the sedimentary record of environmental and ice volume changes within the Aurora Subglacial Basin (ASB), which is presently occupied by ~7 m sea level-rise equivalent of ice. We acquired 750 km of high-resolution seismic data proximal to the Reynolds Trough and Moscow University Ice Shelf glacial systems west of the Dalton Ice Tongue using dual 45/45 cu. in. G.I. guns and a 24 ch. streamer with 3.125 m groups providing a vertical resolution of ~3 m simultaneously with CHIRP data. These are the first images of this margin acquired and show a remarkable set of sequence stratigraphic transitions. Crystalline basement is at the seafloor landward and buried seaward with a transition to smoother reflection interface. Reflective sedimentary strata overlie the basement, dip seaward, and are capped by a landward-dipping regional angular unconformity. Above this are a series of transparent seismic facies that, along with the middle to outer shelf seafloor, dip landward towards a shelf-oblique glacial trough. The older, seaward-dipping strata include a deeper series of units that display at least three stratal architectures interpreted to be shelf deltas implying a pre-glacial, fluvial environment within the drainage basin. Above these sequences, the seismic facies transition to surfaces exhibiting significant erosion, small u-shaped valleys, and channel fill sequences, all of which are reminiscent of temperate glacial features. We interpret these sequences as including sub-ice tunnel valleys and grounding zone wedges with interspersed non-glacial to pro-glacial deposits. Increasing glaciogenic facies upsection suggests a gradual fluvial to glacial transition and increasing glacial extent with time. The subsequent transition to ice sheets is marked by erosion to basement landward and the angular unconformity seaward. The unconformity is overlain by glacial diamict, representing an incomplete record of cold-based glaciations after the ASB became ice-filled. Correlations with cores collected above and below the unconformity and deltaic unit should allow us to determine the ages of these transitions from fluvial to polythermal to ice sheets in East Antarctica.

Graphical representations of the chemistry of garnets in a three-dimensional MATLAB based provenance plot

NASA Astrophysics Data System (ADS)

Knierzinger, Wolfgang; Palzer, Markus; Wagreich, Michael; Meszar, Maria; Gier, Susanne

2016-04-01

A newly developed, MATLAB based garnet provenance plot allows a three-dimensional tetrahedral representation of the chemistry of garnets for the endmembers almandine, pyrope, spessartine and grossular. Based on a freely accessible database of Suggate & Hall (2013) and additional EPMA-data on the internet, the chemistry of more than 2500 garnets was evaluated and used to create various subfields that correspond to different facies conditions of metapelitic, metasomatic and metaigneous rocks as well as granitic rocks. These triangulated subfields act as reference structures within the tetrahedron, facilitating assignments of garnet chemistries to different lithologies. In comparison with conventional tenary garnet discrimination diagrams by Mange & Morton (2007), Wright/Preston et al. (1938/2002) and Aubrecht et al. (2009), this tetrahedral provenance plot enables a better assessment of the conditions of formation of garnets by reducing the overlapping of certain subfields. In particular, a clearer distinction between greenschist facies rocks, amphibolite facies rocks and granitic rocks can be achieved. First applications of the tetrahedral garnet plot provided new insights on sedimentary processes during the Lower Miocene in the pre-Alpine Molasse basin. Bibliography Aubrecht, R., Meres, S., Sykora, M., Mikus, T. (2009). Provenance of the detrital garnets and spinels from the Albian sediments of the Czorsztyn Unit (Pieniny Klippen Belt , Western Carpathians, Slovakia). In: Geologica Carpathica, Dec. 2009, 60, 6, pp. 463-483. Mange, M.A., Morton, A.C. (2007). Geochemistry of Heavy Minerals. In: Mange, M.A. & Wright, D.T.(2007).Heavy Minerals in Use, Amsterdam, pp. 345-391. Preston, J., Hartley, A., Mange-Rajetzky, M., Hole, M., May, G., Buck, S., Vaughan, L. (2002). The provenance of Triassic continental sandstones from the Beryl Field, northern North Sea: Mineralogical, geochemical and sedimentological constraints. In: Journal of Sedimentary Research, 72, pp. 18-29. Suggate, S.M., Hall, R., (2013). Using detrital garnet compositions to determine provenance: a new compositional database and procedure. In: Scott, R.A., Smyth, H.R., Morton, A.C., Richardson, N. (Eds.), Sediment Provenance Studies in Hydrocarbon Exploration and Production. Geological Society of London, Special Publication, 386. http://dx.doi.org/10.1144/SP386.8 Wright, W.I., (1938).The composition and occurrence of garnets. In: American Mineralogist, 23,pp. 436 - 449.

A suture delta: the co-evolution of tectonics and sedimentology as a remnant ocean basin closes; the Indo Burman ranges, northeast India and Bangladesh

NASA Astrophysics Data System (ADS)

Sincavage, R.; Betka, P. M.; Seeber, L.; Steckler, M. S.; Zoramthara, C.

2017-12-01

The closure of an ocean basin involves the interplay of tectonics and sedimentology, whereby thick successions of fluvio-deltaic and shallow marine sediment accumulate in the closing gap between the subduction zone and passive margin. The transition from subduction to collision involves processes that are inherently time-transgressive and co-evolve to influence the nature of the developing tectonic wedge. The Indo-Burman Ranges (IBR) of eastern India present a unique opportunity to examine this scenario on a variety of spatial (10-2­­­-105 m2) and temporal (1 a-10 Ma) scales. Recent field mapping campaigns in the IBR have illuminated analogous depositional environments expressed in the Neogene outcrops of the IBR and the Holocene sediment archive of the Ganges-Brahmaputra-Meghna delta (GBMD). Six distinct lithofacies are present in shallow-marine to fluvial strata of the IBR, containing sedimentary structures that reflect depositional environments correlative with the modern delta. Cyclical alternations of fine sands and silts in packages on the order of 15-20 cm thick define part of the shallow-marine section (M2 facies) that we interpret to represent the foreset beds of the ancient subaqueous delta. The overall scale and sedimentary structures of M2 compare favorably with modern foreset deposits in the Bay of Bengal. Tan-orange medium-grained, well sorted fluvial sandstone that contain large scale (1-10 m) tabular and trough cross bedding represent large-river channel deposits (F2 facies) that overlie the shallow marine strata. F2 deposits bear a striking resemblance in scale and character to bar deposits along the modern Jamuna River. Preliminary grain size analyses on the F2 facies yield grain size distributions that are remarkably consistent with Brahmaputra-sourced mid-Holocene sediments from Sylhet basin within the GBMD. Current research on the GBMD has revealed quantifiable trends in bed thicknesses, downstream fining, and grain size within fluvial deposits. These data will be coupled with ongoing structural and geo- and thermochronology field studies of the IBR that aim to continue to reveal the structural and stratigraphic evolution of this geologically active and densely populated region.

Microfacies of mappable Archean biomats, Moodies Group, Barberton Greenstone Belt, South Africa

NASA Astrophysics Data System (ADS)

Gamper, Antonia; Heubeck, Christoph; Ohnemueller, Frank; Walsh, Maud

2010-05-01

The ca. 3.22 Ga-old Moodies Group, Barberton Mountain Land, South Africa, arguably includes the world's oldest regionally mappable biofacies. There, abundant smooth, wavy, domal or cuspate, interwoven or parallel-stratified laminae of isotopically light kerogen (Noffke et al. 2006) in shallow-water or coastal environments show a microtopography of several cm, deform cohesively, trap and bind grains, and were surficially rapidly silicified. In order to investigate the microfacies and habitat of these extensive biomats, we measured stratigraphic sections, sampled for petrography and composition, and documented sedimentary structures throughout. Seven stratigraphic sections allow the reconstruction of a coastal depositional system with an thickness of approx. 240 m along an > 11 km long outcrop belt. The system can be subdivided in (from base to top deepening) terrestrial coastal, low-angle shoreline, subtidal and shoreface facies. Biomats are most densely (mm- to cm-) spaced in the shoreface unit whereas they are least common in the basal terrestrial unit in which single-pebble trains and thin gravel conglomerates occur. Biomats (mean 4 mm thick) reach their greatest individual thickness (up to 0,8 cm) and dominate the spectrum of sedimentary structures in the subtidal unit where they form black, internally laminated chert bands. Most chert bands overlie lenses of elongate, well-sorted, coarse-grained sandstone but are in turn sharply overlain by medium- and fine-grained sandstone, suggesting cyclic current activity. Clustered or regularly spaced (sub-)vertical fluid escape structures penetrate and ductily deform densely spaced interwoven biomats. They occur most widely in the shoreface facies, show a mean height of 49 cm, are commonly offset horizontally, and reach up to 230 cm. The margins of several shallow (max. 1 m deep) and up to 8 m wide channels erosively truncate wrinkled biomats of the terrestrial coastal facies. Channel fill includes dominant medium- to coarse-grained sand and subordinate palm-sized planar (apparently brittle) biomat fragments mixed with granule and pebble lag at the channel base. Channel dimensions and erosivity may suggest a subaerial setting and imply that biomat growth either predated a temporary base-level drop or grew on land, presumably in a flat coastal setting. The micromorphology, large lateral extent, and depositional architecture of the biomats indicate a well-developed, adaptable, resistant microbial ecosystem along a medium-energy coast and offer a remarkable window in the conditions under which early life on Earth developed.

Sedimentary Facies and Stratigraphy of the Changjiang (Yangtze River) Delta

NASA Astrophysics Data System (ADS)

Dalrymple, R. W.; Zhang, X.; Lin, C. M.

2017-12-01

A disproportionate number of the world's largest deltas are tide-dominated or strongly tide-influenced, in part because the low gradient of these rivers allows the tide to penetrate far inland, generating strong tidal currents at the river mouth. These deltas also tend to be mud-dominated because a significant fraction of the bedload is trapped farther inland. Despite their great importance as sediment depo-centers, as analogues for ancient sedimentary successions, and as areas of intense human occupation, they are the most poorly understood coastal system. The Changjiang (Yangtze River), the 4th largest river in the world in terms of sediment discharge, is one such tide-dominated system, with a mean tidal range of 2.7 m and tidal-current speeds of 1 m/s at its mouth. It shows a fairly typical series of low-relief channels and bars in the mouth-bar area and passes seaward and down-drift into a coastal mud belt that extends 800 km to the south of the river mouth. The deposits from both the transgressive-phase and modern delta are all dominated by mud, except for the fluvial-channel deposits that are clean sand. Channel-floor deposits in areas with appreciable tidal influence contain abundant fluid-mud layers (1-3 cm thick), intercalated with relatively coarse sand; such mud layers show evidence of tidal cyclicity. The overlying tidal-bar deposits commonly become sandier upward because of the upward loss of fluid-mud layers. The tidal channels and bars that characterize the mouth-bar and delta-front area are dominated by randomly organized structureless mud layers, 5-30 cm thick, that are interpreted to be storm-generated fluid-mud deposits. These mud layers become less abundant upward, generating upward-sanding successions. These facies are very similar to those seen in the Amazon and Fly River deltas, suggesting that this is a common motif, and indicating the importance of fluid mud in the dynamics of such systems. Facies proximality can be determined by careful comparison of sand-size trends, tidal mud-layer thicknesses (relative to the turbidity maximum) and the abundance of wave-generated fluid-mud layers. Application of these concepts shows that the transgressive phase of the delta consists of three retrogradationally stacked parasequences, each 7-15 m thick, overlain by the 40 m-thick highstand delta.

Research Note:An approach to integrated assessement of reservoir siltation: the Joaquín Costa reservoir as a case study

NASA Astrophysics Data System (ADS)

Navas, A.; Valero Garcés, B.; Machín, J.

In 1932, the Esera river was dammed at the foothills of the Pyrenean External Ranges; since then, sedimentation has reduced its water storage capacity by a third. This study of the sediments in the Joaquín Costa reservoir has been based on detailed sedimentological examination and other analysis of mineralogy, grain size distribution and the chemical components of the materials accumulated at the bottom of the reservoir. Interpretations are based on results from four sediment cores collected at sites representative of the main environments in the reservoir. Records of known flood events and of reservoir management data have been combined with a 137Cs-derived chronology. Thus, it has been possible to ascribe the sedimentary record at the different reservoir environments to specific years, as well as some main changes in the facies types and sediment components. This methodology is a first approach to assessing siltation processes and dynamics in Mediterranean mountain reservoirs.

Geochemistry of Fine-grained Sediments and Sedimentary Rocks

NASA Astrophysics Data System (ADS)

Sageman, B. B.; Lyons, T. W.

2003-12-01

The nature of detrital sedimentary (siliciclastic) rocks is determined by geological processes that occur in the four main Earth surface environments encountered over the sediment's history from source to final sink: (i) the site of sediment production (provenance), where interactions among bedrock geology, tectonic uplift, and climate control weathering and erosion processes; (ii) the transport path, where the medium of transport, gradient, and distance to the depositional basin may modify the texture and composition of weathered material; (iii) the site of deposition, where a suite of physical, chemical, and biological processes control the nature of sediment accumulation and early burial modification; and (iv) the conditions of later burial, where diagenetic processes may further alter the texture and composition of buried sediments. Many of these geological processes leave characteristic geochemical signatures, making detrital sedimentary rocks one of the most important archives of geochemical data available for reconstructions of ancient Earth surface environments. Although documentation of geochemical data has long been a part of the study of sedimentation (e.g., Twenhofel, 1926, 1950; Pettijohn, 1949; Trask, 1955), the development and application of geochemical methods specific to sedimentary geological problems blossomed in the period following the Second World War ( Degens, 1965; Garrels and Mackenzie, 1971) and culminated in recent years, as reflected by the publication of various texts on marine geochemistry (e.g., Chester, 1990, 2000), biogeochemistry (e.g., Schlesinger, 1991; Libes, 1992), and organic geochemistry (e.g., Tissot and Welte, 1984; Engel and Macko, 1993).Coincident with the growth of these subdisciplines a new focus has emerged in the geological sciences broadly represented under the title of "Earth System Science" (e.g., Kump et al., 1999). Geochemistry has played the central role in this revolution (e.g., Berner, 1980; Garrels and Lerman, 1981; Berner et al., 1983; Kump et al., 2000), with a shifting emphasis toward sophisticated characterization of the linkages among solid Earth, oceans, biosphere, cryosphere, atmosphere, and climate, mediated by short- and long-term biogeochemical cycles. As a result, one of the primary objectives of current geological inquiry is improved understanding of the interconnectedness and associated feedback among the cycles of carbon, nitrogen, phosphorous, oxygen, and sulfur, and their relationship to the history of Earth's climate. This "Earth System" approach involves uniformitarian extrapolations of knowledge gained from modern environments to proxy-based interpretations of environmental change recorded in ancient strata. The strength of modern data lies with direct observations of pathways and products of physical, chemical, and biological processes, but available time-series are short relative to the response times of many of the biogeochemical systems under study. By contrast, stratigraphically constrained geological data offer time-series that encompass a much fuller range of system response. But with the enhanced breadth of temporal resolution and signal amplitude provided by ancient sedimentary records comes a caveat - we must account for the blurring of primary paleo-environmental signals by preservational artifacts and understand that proxy calibrations are extended from the modern world into a nonsubstantively uniformitarian geological past.Fortunately, detrital sedimentary rocks preserve records of multiple proxies (dependent and independent) that illuminate the processes and conditions of sediment formation, transport, deposition, and burial. An integrated multiproxy approach offers an effective tool for deconvolving the history of biogeochemical cycling of, among other things, carbon and sulfur, and for understanding the range of associated paleo-environmental conditions (e.g., levels of atmospheric oxygen and carbon dioxide, oceanic paleoredox, and paleosalinity). Authors of a single chapter can hope, at best, to present a cursory glance at the many biogeochemical proxies currently used and under development in sedimentary studies. Our goal, instead, is to focus on a selected suite of tools of particular value in the reconstruction of paleo-environments preserved in fine-grained siliciclastic sedimentary rocks.Fine-grained, mixed siliciclastic-biogenic sedimentary facies - commonly termed hemipelagic (mainly calcareous or siliceous mudrocks containing preserved organic matter (OM)) - are ideal for unraveling the geological past and are thus the focus of this chapter. These strata accumulate in predominantly low-energy basinal environments where the magnitude (and frequency) of lacunae is diminished, resulting in relatively continuous, though generally condensed sequences. Fortunately, condensation tends to benefit geochemical analysis as it helps to amplify some subtle environmental signals. Because hemipelagic facies include contributions from both terrigenous detrital and pelagic biogenic systems, as well as from authigenic components reflecting the burial environment (Figure 1), they are rich archives of geochemical information. In this chapter we present a conceptual model linking the major processes of detrital, biogenic, and authigenic accumulation in fine-grained hemipelagic settings. This model is intended to be a fresh synthesis of decades of prior research on the geochemistry of modern and ancient mudrocks, including our own work.

Identification of hydrochemical facies in the Roswell Artesian Basin, New Mexico (USA), using graphical and statistical methods

NASA Astrophysics Data System (ADS)

Newman, Brent D.; Havenor, Kay C.; Longmire, Patrick

2016-06-01

Analysis of groundwater chemistry can yield important insights about subsurface conditions, and provide an alternative and complementary method for characterizing basin hydrogeology, especially in areas where hydraulic data are limited. More specifically, hydrochemical facies have been used for decades to help understand basin flow and transport, and a set of facies were developed for the Roswell Artesian Basin (RAB) in a semi-arid part of New Mexico, USA. The RAB is an important agricultural water source, and is an excellent example of a rechargeable artesian system. However, substantial uncertainties about the RAB hydrogeology and groundwater chemistry exist. The RAB was a great opportunity to explore hydrochemcial facies definition. A set of facies, derived from fingerprint diagrams (graphical approach), existed as a basis for testing and for comparison to principal components, factor analysis, and cluster analyses (statistical approaches). Geochemical data from over 300 RAB wells in the central basin were examined. The statistical testing of fingerprint-diagram-based facies was useful in terms of quantitatively evaluating differences between facies, and for understanding potential controls on basin groundwater chemistry. This study suggests the presence of three hydrochemical facies in the shallower part of the RAB (mostly unconfined conditions) and three in the deeper artesian system of the RAB. These facies reflect significant spatial differences in chemistry in the basin that are associated with specific stratigraphic intervals as well as structural features. Substantial chemical variability across faults and within fault blocks was also observed.

Summary report on the regional geology, environmental considerations for development, petroleum potential, and estimates of undiscovered recoverable oil and gas resources of the United States southeastern Atlantic continental margin in the area of proposed oil and gas lease sale No. 78

USGS Publications Warehouse

Dillon, William P.

1981-01-01

This report summarizes our general knowledge of the geology and petroleum potential, as well as potential problems and hazards associated with development of petroleum resources, of the area proposed for nominations for lease sale number 78. This area includes the U.S. eastern continental margin from the mouth of Chesapeake Bay to approximately Cape Canaveral, Florida, including the upper Continental Slope and inner Blake Plateau. The area for possible sales and the previous areas leased are shown in figure 1; physiographic features of the region are shown in figure 2. Six exploration wells have been drilled within the proposed lease area (figs. 3 and 4) but no commercial discoveries have been made. All six wells were drilled on the Continental Shelf in the Southeast Georgia Embayment. No commercial production has been obtained onshore in the region. The areas already drilled have thin sedimentary sections, and the deeper rocks are dominantly continental facies. Petroleum formation may have been hindered by a lack of organic material and sufficient burial for thermal maturation. Analysis of drill and seismic profiling data presented here, however, indicates that a much thicker sedimentary rock section containing a much higher proportion of marine deposits exists seaward of the exploratory wells on the Continental Shelf. These geologic conditions imply that the offshore basins may be more favorable environments for generating petroleum.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sablock, J.

A trace element signature, a characteristic pattern of enrichment and depletion of trace elements, was determined for a group of siliciclastic-carbonate Oxfordian and Kimmeridgian sedimentary strata, collected from outcrops in western Montana, southeastern British Columbia and southern Alberta. The average values, by petrofacies, of 10 major and 18 trace elements were measured for 40 samples. These data were normalized to Upper Continental Crust (UCC), and plotted against averaged published values of graywackes from the same facies. The rare earth elements (REEs), as well as Ti, Zr, Nb and Y are considered immobile even through diagenesis, and at least low levelmore » metamorphism. So these elements should form a reliable part of the geochemical signature. Compared to UCC and average graywacke, Jurassic samples are very depleted in Zr, Nb and Y. Oxfordian samples have slightly higher rare earth element values, i.e. La, Ce and Nd, than either other Jurassic samples or average graywacke. The most likely source of REE values are garnets and tourmaline which occur as inclusions in monocrystalline quartz grains. This pattern, and petrological study, point to a sedimentary source area, deficient in feldspar, heavy minerals and rock fragments. The consistency of the signature throughout this time may indicate slow uplift of a widespread sedimentary source area, or could be an effect of greater mixing and shorter residence time of dissolved materials in an epeiric sea.« less

Provenance and tectonic setting of the supra-crustal succession of the Qinling Complex: Implications for the tectonic affinity of the North Qinling Belt, Central China

NASA Astrophysics Data System (ADS)

Shi, Yu; Huang, Qianwen; Liu, Xijun; Krapež, Bryan; Yu, Jinhai; Bai, Zhian

2018-06-01

The Qinling Complex lies in the Qinling orogenic belt of Central China and holds the key to understanding the evolution of this feature. The Qinling Complex comprises a basement complex composed of amphibolite and ecologite, overlain by a supra-crustal succession that has been metamorphosed to the upper greenschist facies at approximately 516-509 Ma. The protoliths of the meta-sedimentary rocks are graywackes, which are divided into lower, middle and upper units. Detrital zircons from nine samples of the supra-crustal succession have ages ranging from 1182 to 1158 Ma for the lower unit, 957 to 955 Ma for the middle unit and 917 to 840 Ma for the upper unit. The lower unit is intruded by a ca. 960 Ma pluton. The bulk compositions of these meta-sedimentary rocks and their detrital zircon ages clearly indicate derivation from Meso- and Neo-proterozoic granites. Thus, we suggest that the sedimentary succession was derived from an arc-related tectonic setting and that none of the detritus was sourced from the southern margin of the North China Block or from the northern and western margins of the South China Block. We conclude that the North Qinling Belt was an independent micro-continental block during the Meso- to Neo-proterozoic.

Evaluation of the airborne visible-infrared imaging spectrometer for mapping subtle lithological variation

NASA Technical Reports Server (NTRS)

Kruse, Fred A.

1990-01-01

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), flown aboard the NASA ER-2 aircraft in 1987 and 1989, used four linear arrays and four individual spectrometers to collect data simultaneously from the 224 bands in a scanned 614 pixel-wide swath perpendicular to the aircraft direction. The research had two goals. One was to evaluate the AVIRIS data. The other was to look at the subtle lithological variation at the two test sites to develop a better understanding of the regional geology and surficial processes. The geometric characteristics of the data, adequacy of the spatial resolution, and adequacy of the spectral sampling interval are evaluated. Geologic differences at the test sites were mapped. They included lithological variation caused by primary sedimentary layering, facies variation, and weathering; and subtle mineralogical differences caused by hydrothermal alterations of igneous and sedimentary rocks. The investigation used laboratory, field, and aircraft spectral measurements; known properties of geological materials; digital image processing and spectrum processing techniques; and field geologic data to evaluate the selected characteristics of the AVIRIS data.

Suspected microbial-induced sedimentary structures (MISS) in Furongian (Upper Cambrian; Jiangshanian, Sunwaptan) strata of the Upper Mississippi Valley

USGS Publications Warehouse

Eoff, Jennifer D.

2014-01-01

The Furongian (Upper Cambrian; Jiangshanian and Sunwaptan) Tunnel City Group (Lone Rock Formation and Mazomanie Formation), exposed in Wisconsin and Minnesota, represents a shallow-marine clastic environment during a time of exceptionally high sea level. Lithofacies from shoreface to transitional-offshore settings document deposition in a wave- and storm-dominated sea. Flooding of the cratonic interior was associated with formation of a condensed section and the extensive development of microbial mats. Biolamination, mat fragments, wrinkle structures, and syneresis cracks are preserved in various sandstone facies of the Lone Rock Formation, as is evidence for the cohesive behavior of sand. These microbial-induced sedimentary structures (MISS) provide unique signals of biological–physical processes that physical structures alone cannot mimic. The MISS are associated with a trilobite extinction event in the Steptoean–Sunwaptan boundary interval. This may support recent claims that Phanerozoic microbial mats were opportunistic disaster forms that flourished during periods of faunal turnover. Further investigation of stratigraphic, taphonomic, and other potential biases, however, is needed to fully test this hypothesis.

Factors controlling mud accumulation in the Heuksan mud belt off southwestern Korea

NASA Astrophysics Data System (ADS)

Chang, Tae Soo; Ha, Hun Jun; Chun, Seung Soo

2015-12-01

The Heuksan mud belt (hereafter HMB) is 20~50 km wide, ~200 km long, and ~50 m thick, having accumulated in the course of the Holocene transgression on the tide-dominated epicontinental shelf southwest of Korea. The internal architecture of the HMB is characterized by offshore prograding clinoforms. Of particular interest are the depositional processes responsible for this anomalously thick mud accumulation within a relatively short period of time. Tidal currents are important in the dispersal of mud in the HMB, although these alone cannot explain such an enormous mud deposit. In order to understand the formative processes of the HMB, a detailed sedimentary facies analysis, including high-resolution grain-size measurements, has been conducted on more than 30 short cores and three long drill cores recovered from the mud belt. Five major mud facies were identified. Of these, mud sequences showing a thickening-thinning trend of alternating silt and clay laminae suggestive of a tidal origin occur dominantly at inner to mid shelf locations. By contrast, internally structureless muds with sharp bases and no bioturbation, which are interpreted of representing fluid-mud deposits, are widespread at mid to outer shelf locations. Wave-generated mud ripples and storm beds on the inner shelf suggest that storm waves in winter resuspend previously deposited mud to form near-bed fluid-mud suspensions with resulting gravity-driven mud transport across the low-gradient outer shelf. This previously not recognized process is probably a major factor controlling depositional processes on the giant mud belt, enabling rapid accumulation and offshore progradation even during transgression, i.e., at times of sea-level rise.

The development of miocene extensional and short-lived basin in the Andean broken foreland: The Conglomerado Los Patos, Northwestern Argentina

NASA Astrophysics Data System (ADS)

del Papa, Cecilia E.; Petrinovic, Ivan A.

2017-01-01

The Conglomerado Los Patos is a coarse-grained clastic unit that crops out irregularly in the San Antonio de los Cobres Valley in the Puna, Northwestern Argentina. It covers different units of the Cretaceous-Paleogene Salta Group by means of an angular unconformity and, in turn, is overlaid in angular unconformity by the Viscachayoc Ignimbrite (13 ± 0.3 Ma) or by late Miocene tuffs. Three lithofacies have been identified in the Corte Blanco locality; 1) Bouldery matrix-supported conglomerate (Gmm); 2) Clast-supported conglomerate (Gch) and 3) Imbricated clast-supported conglomerate (Gci). The stratigraphic pattern displays a general fining upward trend. The sedimentary facies association suggests gravitational flow processes and sedimentation in alluvial fan settings, from proximal to medial fan positions, together with a slope decrease upsection. Provenance studies reveal sediments sourced from Precambrian to Ordovician units located to the southwest, except for volcanic clasts in the Gmm facies that shows U/Pb age of 14.5 ± 0.5 Ma. This new age represents the maximum depositional age for the Conglomerado Los Patos, and it documents that deposition took place simultaneously during a period of increased tectonic and volcanic activity in the area. The structural analysis of the San Antonio de los Cobres Valley and the available thermochronological ages, indicate active N-S main thrusts and NW-SE transpressive and locally normal faults during the middle Miocene. In this context, we interpret the Conglomerado Los Patos to represent sedimentation in a small, extensional and short-lived basin associated with the compressional Andean setting.

Anthropogenic effects on sedimentary facies in Lake Baldeney, West Germany

NASA Astrophysics Data System (ADS)

Neumann-Mahlkau, Peter; Niehaus, Heinz Theo

1983-12-01

Analysis of well logs of Lake Baldeney, a reservoir of the Ruhr River, yields four facies factors that reflect the effect of anthropogenic processes on the sediment. First, the sedimentation rate is directly related to the subsidence caused by mining. The extent of the subsidence was such that the sediment load of the river could not compensate for the sinking of the lake bottom. Discharged sediment filled about one-fifth of the basin within 40 years. In certain areas of the basin the sedimentation rate reached up to 10 cm per year. Second, the grain-size distribution of the sediment was influenced by long-term and short-term events. During the subsidence, grain-size distribution remained relatively constant. The destruction of the Möhne River dam during World War II resulted in the presence of an extremely large grain size as evidenced by the so-called Möhnelage. The filling of the lake after 1961 was accompanied by a continual increase in medium grain size. Third, until 1975, the mode of the lake sediment reflects the effect of mining in the vicinity of the lake. High coal content can be traced to its origin. The introduction of modern production processes, modernization of coal dressing, and hydraulic hauling is documented in the sediment. Finally, the heavy metal content of the sediment corresponds to the industrial development in the drainage area the Ruhr River. The accumulation of Cd reached an extreme concentration, exceeding the natural content by a thousand times. Variation in concentration reflects an increase in industrial production, as well as measures undertaken to restore water quality.

A comparative analysis of the distribution, composition and geochemistry of surface sediments in the Linthipe and Songwe River Deltas of Lake Malawi

NASA Astrophysics Data System (ADS)

Dolozi, Michael B.; Kalindekafe, Leonard S. N.; Ngongondo, Cosmo; Dulanya, Zuze

2011-05-01

The Linthipe and Songwe River Deltas are found to the extreme southern and northern parts of Lake Malawi respectively within the East African Rift System. They occur in contrasting tectonic and climatic settings of the rift-valley half-graben structure. The sub-aqueous part of the Songwe Delta consists of relatively finer grained sediments than the Linthipe but is relatively poorly sorted. The composition of sediments within the Songwe Delta shows significant amounts of sedimentary and volcanic lithic fragments which are lacking in the Linthipe. On the other hand, ferromanganese nodules were recovered in the Linthipe Delta at water depths of 80-100 m but were not recovered in Songwe Delta at similar water depths. The finer grained facies of the Songwe Delta suggests a more prograded delta than the Linthipe. However, its poorly sorted sediments are most likely due to the heterogeneous geology of the source area; higher and faster depositional rates due to climatic influences. The lack of Ferromangenese nodules in the Songwe Delta is probably due to the sand-mud facies boundary which occurs at shallower depth. The higher proportion of Total Organic Carbon (TOC) in higher the Linthipe Delta is probably related to high rates of environmental degradation such as deforestation and agricultural activities in the riparian catchment basin. This is in contrast to the Songwe catchment basin where the levels of anthropogenic disturbance are less and climate, geomorphology and the heterogenous character of the source rocks seems to play a major role in the sedimentation processes.

Geophysical constraints on Rio Grande rift structure and stratigraphy from magnetotelluric models and borehole resistivity logs, northern New Mexico

USGS Publications Warehouse

Rodriguez, Brian D.; Sawyer, David A.; Hudson, Mark R.; Grauch, V.J.S.

2013-01-01

Two- and three-dimensional electrical resistivity models derived from the magnetotelluric method were interpreted to provide more accurate hydrogeologic parameters for the Albuquerque and Española Basins. Analysis and interpretation of the resistivity models are aided by regional borehole resistivity data. Examination of the magnetotelluric response of hypothetical stratigraphic cases using resistivity characterizations from the borehole data elucidates two scenarios where the magnetotelluric method provides the strongest constraints. In the first scenario, the magnetotelluric method constrains the thickness of extensive volcanic cover, the underlying thickness of coarser-grained facies of buried Santa Fe Group sediments, and the depth to Precambrian basement or overlying Pennsylvanian limestones. In the second scenario, in the absence of volcanic cover, the magnetotelluric method constrains the thickness of coarser-grained facies of buried Santa Fe Group sediments and the depth to Precambrian basement or overlying Pennsylvanian limestones. Magnetotelluric surveys provide additional constraints on the relative positions of basement rocks and the thicknesses of Paleozoic, Mesozoic, and Tertiary sedimentary rocks in the region of the Albuquerque and Española Basins. The northern extent of a basement high beneath the Cerros del Rio volcanic field is delineated. Our results also reveal that the largest offset of the Hubbell Spring fault zone is located 5 km west of the exposed scarp. By correlating our resistivity models with surface geology and the deeper stratigraphic horizons using deep well log data, we are able to identify which of the resistivity variations in the upper 2 km belong to the upper Santa Fe Group sediment

Influence of pre-tectonic carbonate facies architecture on deformation patterns of syntectonic turbidites, an example from the central Mexican fold-thrust belt

NASA Astrophysics Data System (ADS)

Vásquez Serrano, Alberto; Tolson, Gustavo; Fitz Diaz, Elisa; Chávez Cabello, Gabriel

2018-04-01

The Mexican fold-thrust belt in central México excellently exposes relatively well preserved syntectonic deposits that overlay rocks with lateral lithostratigraphic changes across the belt. We consider the deformational effects of these changes by investigating the geometry, kinematics and strain distribution within syntectonic turbidites, which are deposited on top of Albian-Cenomanian shallow and deep water carbonate layers. Field observations and detailed structural analysis at different stratigraphic and structural levels of the Late Cretaceous syntectonic formation are compared with the deformation as a function of lithological and structural variations in the underlying carbonate units, to better understand the effect of these lithostratigraphic variations on deformation, kinematics, strain distribution and propagation of deformation. From our kinematic analyses, we conclude that the syntectonic strata are pervasively affected by folding in all areas and that deformation partitioning localized shear zones at the boundaries of this unit, particularly along the contact with massive carbonates. At the boundaries with massive platformal carbonates, the turbidites are strongly deformed by isoclinal folding with a pervasive sub-horizontal axial plane cleavage and 70-60% shortening. In contrast, contacts with thinly-bedded carbonate layers (basinal facies), do not show strain localization, and have horizontal shortening of 50-40% that is accommodated by buckle folds with a less pervasive, steeply dipping cleavage. The mechanical properties variations in the underlying pre-tectonic units as a function of changes in lithostratigraphy fundamentally control the deformation in the overlying syntectonic strata, which is an effect that could be expected to occur in any deformed sedimentary sequence with such variations.

Sequential filling of a late paleozoic foreland basin

USGS Publications Warehouse

Mars', J. C.; Thomas, W.A.

1999-01-01

Through the use of an extensive data base of geophysical well logs, parasequence-scale subdivisions within a late Paleozoic synorogenic clastic wedge resolve cycles of sequential subsidence of a foreland basin, sediment progradation, subsidence of a carbonate shelf edge, diachronously subsiding discrete depositional centers, and basinwide transgression. Although temporal resolution of biostratigraphic markers is less precise in Paleozoic successions than in younger basins, parasequence-scale subdivisions provide more detailed resolution within marker-defined units in Paleozoic strata. As an example, the late Paleozoic Black Warrior basin in the foreland of the Ouachita thrust belt is filled with a synorogenic clastic wedge, the lower part of which intertongues with the fringe of a cratonic carbonate facie??s in the distal part of the basin. The stratal geometry of one tongue of the carbonate facie??s (lower tongue of Bangor Limestone) defines a ramp that grades basinward into a thin black shale. An overlying tongue of the synorogenic clastic wedge (lower tongue of Parkwood Formation) consists of cyclic delta and delta-front deposits, in which parasequences are defined by marine-flooding surfaces above coarsening- and shallow ing-upward successions of mudstone and sandstone. Within the lower Parkwood tongue, two genetic stratigraphie sequences (A and B) are defined by parasequence offlap and downlap patterns and are bounded at the tops by basinwide maximum-flooding surfaces. The distribution of parasequences within sequences A and B indicates two cycles of sequential subsidence (deepening) and progradation, suggesting subsidence during thrust advance and progradation during thrust quiescence. Parasequence stacking in sequences A and B also indicates diachronous differential tectonic subsidence of two discrete depositional centers within the basin. The uppermost sequence (C) includes reworked sandstones and an overlying shallow-marine limestone, a vertical succession that reflects no tectonic subsidence, a very minor or null sediment supply, and basinwide transgression. The temporal resolution at parasequence scale significantly improves the resolution of the tectonic history of the thrust belt-foreland basin system. Copyright ?? 1999, SEPM (Society for Sedimentary Geology).

Facies Modeling Using 3D Pre-Stack Simultaneous Seismic Inversion and Multi-Attribute Probability Neural Network Transform in the Wattenberg Field, Colorado

NASA Astrophysics Data System (ADS)

Harryandi, Sheila

The Niobrara/Codell unconventional tight reservoir play at Wattenberg Field, Colorado has potentially two billion barrels of oil equivalent requiring hundreds of wells to access this resource. The Reservoir Characterization Project (RCP), in conjunction with Anadarko Petroleum Corporation (APC), began reservoir characterization research to determine how to increase reservoir recovery while maximizing operational efficiency. Past research results indicate that targeting the highest rock quality within the reservoir section for hydraulic fracturing is optimal for improving horizontal well stimulation through multi-stage hydraulic fracturing. The reservoir is highly heterogeneous, consisting of alternating chalks and marls. Modeling the facies within the reservoir is very important to be able to capture the heterogeneity at the well-bore scale; this heterogeneity is then upscaled from the borehole scale to the seismic scale to distribute the heterogeneity in the inter-well space. I performed facies clustering analysis to create several facies defining the reservoir interval in the RCP Wattenberg Field study area. Each facies can be expressed in terms of a range of rock property values from wells obtained by cluster analysis. I used the facies classification from the wells to guide the pre-stack seismic inversion and multi-attribute transform. The seismic data extended the facies information and rock quality information from the wells. By obtaining this information from the 3D facies model, I generated a facies volume capturing the reservoir heterogeneity throughout a ten square mile study-area within the field area. Recommendations are made based on the facies modeling, which include the location for future hydraulic fracturing/re-fracturing treatments to improve recovery from the reservoir, and potential deeper intervals for future exploration drilling targets.

Sedimentology of the Essaouira Basin (Meskala Field) in context of regional sediment distribution patterns during upper Triassic pluvial events

NASA Astrophysics Data System (ADS)

Mader, Nadine K.; Redfern, Jonathan; El Ouataoui, Majid

2017-06-01

Upper Triassic continental clastics (TAGI: Trias Argilo-Greseux Inferieur) in the Essaouira Basin are largely restricted to the subsurface, which has limited analysis of the depositional environments and led to speculation on potential provenance of the fluvial systems. Facies analysis of core from the Meskala Field onshore Essaouira Basin is compared with tentatively time-equivalent deposits exposed in extensive outcrops in the Argana Valley, to propose a process orientated model for local versus regional sediment distribution patterns in the continuously evolving Moroccan Atlantic rift during Carnian to Norian times. The study aims to unravel the climatic overprint and improve the understanding of paleo-climatic variations along the Moroccan Atlantic margin to previously recognised Upper Triassic pluvial events. In the Essaouira Basin, four facies associations representing a progressive evolution from proximal to distal facies belts in a continental rift were established. Early ephemeral braided river systems are succeeded by a wet aeolian sandflat environment with a strong arid climatic overprint (FA1). This is followed by the onset of perennial fluvial deposits with extensive floodplain fines (FA2), accompanied by a distinct shift in fluvial style, suggesting increase in discharge and related humidity, either locally or in the catchment area. The fluvial facies transitions to a shallow lacustrine or playa lake delta environment (FA3), which exhibits cyclical abandonment. The delta is progressively overlain by a terminal playa with extensive, mottled mudstones (FA4), interpreted to present a return from cyclical humid-arid conditions to prevailing aridity in the basin. In terms of regional distribution and sediment source provenance, paleocurrent data from Carnian to Norian deposits (T5 to T8 member) in the Argana Valley suggest paleoflow focused towards the S and SW, not directed towards the Meskala area in the NW as previously suggested. A major depo-centre for fluvial sediments is instead located in the southern Argana Valley, possibly the Souss Basin. To effectively source the reservoir sandstones found in the Meskala Field, a more local provenance area has hence to be envisaged. Despite this, the direct comparison of the genetic evolution of sedimentary sequences in the Argana Valley and Essaouira Basin shows a similar progression from dominantly arid ephemeral depositional environments to humid perennial sedimentation, returning to prominent arid conditions. This suggests climatic control in both regions, where an enhanced humid signal drives perennial fluvial flow in otherwise arid dominated sequences. On a regional scale, this is suggested to record the impact of strong Triassic pluvial events previously recognised in other basins along the Central Atlantic margin during the Carnian to Norian periods.

Storm-related sedimentation influenced by coastal configuration in the stratigraphic record of a tectonically active shelf (Upper Pleistocene Le Castella terrace, Italy)

NASA Astrophysics Data System (ADS)

Nalin, Ronald; Massari, Francesco

2018-03-01

Analysis of patterns of coastal circulation and sediment dispersal is an essential step for the study of controlling factors influencing the long-term dynamics of coastal systems. Modern settings offer the possibility to monitor relevant parameters over relatively short time spans. However, geological examples complement this perspective by providing a time-averaged record where longer trends and stratigraphically significant processes can be evaluated. This study investigates the shallow marine deposits of Le Castella terrace (Upper Pleistocene, southern Italy) to document how patterns of circulation influenced by coastline configuration can affect the preserved millennial-scale depositional record of a progradational shoreline system. The regressive portion of the Le Castella terrace deposits, developed during a relative sea-level highstand and falling stage, consists of a progradational wedge mainly composed of redistributed skeletal particles of a coeval shallow water carbonate factory. Preservation of the morphology of the paleocoastline and abundant current-related sedimentary structures allow reconstruction of the predominant sediment dispersal dynamics responsible for the formation of this sedimentary wedge. Facies and paleocurrent analysis indicate offshore and alongshore sediment transport modes, consistent with coastal circulation driven by storms normally incident to the shoreline and a sharp change in coastline orientation. This coastal inflection influenced circulation patterns causing flow separation and eddy formation in the lee of the curved coastline. Syndepositional tectonic deformation also affected the architecture of the preserved deposits, controlling the nucleation and development of a clinostratified body and determining localized lateral stratigraphic variability. This study illustrates how transient but recurrent circulation patterns associated with changes in coastal orientation and related to high-energy storm events can leave a predominant signature in the stratigraphic record of microtidal shallow-marine successions.

Regional High-Frequency Stratigraphic Cyclicity Analysis of the Upper Cretaceous Juana Lopez Member of the Mancos Shale, New Mexico

NASA Astrophysics Data System (ADS)

Wiercigroch, M.; Bhattacharya, J.

2017-12-01

The Earth is considered to have been in a "greenhouse state" during the Cretaceous Period. High-frequency sedimentary cycles are observed throughout the Cretaceous section of the Western Interior Seaway. Even though this warm Cretaceous climate suggests an ice-free planet Earth, there has been much debate as to whether the observed high-frequency sedimentary cycles are climate-driven Milankovitch-scale cycles that would suggest glaciers during the Cretaceous Period. This study tests the hypothesis of a glacio-eustatic origin of high-frequency cyclicity in the Turonian Juana Lopez Member of the Mancos Shale in the San Juan Basin, New Mexico. Data for this study was obtained from two stratigraphic measured sections which are 3.2 km apart, and located southwest of Shiprock. The two sections are found approximately 60 km away from the Turonian shoreline in an offshore marine environment. A high-resolution thin bed facies analysis on both sections reveals the Juana Lopez to be deposited in a fluvial-dominated, mixed wave- and fluvial-influenced environment. The Juana Lopez is shown to be an overall coarsening-upward sequence, displaying a shallowing regressive environment. Correlations between the two sections reveal 13 correlated parasequences identified through the violation of Walther's Law. An average cyclicity frequency of ca 90 kyr was determined for the sequences by bracketing the Inocermus dimidus and Scaphites whitfieldi biostratigraphic zones within the Juana Lopez sections. This cyclicity represents short eccentricity Milankovitch cycles. Many studies have confirmed that the observed Milankovitch-scaled cyclicity in the Cretaceous must be controlled by glacio-eustasy. With similar Milankovitch cyclicity found in the Juana Lopez, the short eccentricity Milankovitch cycles are interpreted as being glacio-eustatic in origin, which supports the presence of ice in the Cretaceous Period.

Upper flow regime sheets, lenses and scour fills: Extending the range of architectural elements for fluvial sediment bodies

NASA Astrophysics Data System (ADS)

Fielding, Christopher R.

2006-08-01

Fluvial strata dominated internally by sedimentary structures of interpreted upper flow regime origin are moderately common in the rock record, yet their abundance is not appreciated and many examples may go unnoticed. A spectrum of sedimentary structures is recognised, all of which occur over a wide range of scale: 1. cross-bedding with humpback, sigmoidal and ultimately low-angle cross-sectional foreset geometries (interpreted as recording the transition from dune to upper plane bed bedform stability field), 2. planar/flat lamination with parting lineation, characteristic of the upper plane bed phase, 3. flat and low-angle lamination with minor convex-upward elements, characteristic of the transition from upper plane bed to antidune stability fields, 4. convex-upward bedforms, down- and up-palaeocurrent-dipping, low-angle cross-bedding and symmetrical drapes, interpreted as the product of antidunes, and 5. backsets terminating updip against an upstream-dipping erosion surface, interpreted as recording chute and pool conditions. In some fluvial successions, the entirety or substantial portions of channel sandstone bodies may be made up of such structures. These Upper Flow Regime Sheets, Lenses and Scour Fills (UFR) are defined herein as an extension of Miall's [Miall, A.D., 1985. Architectural-element analysis: a new method of facies analysis applied to fluvial deposits. Earth Sci. Rev. 22: 261-308.] Laminated Sand Sheets architectural element. Given the conditions that favour preservation of upper flow regime structures (rapid changes in flow strength), it is suggested that the presence of UFR elements in ancient fluvial successions may indicate sediment accumulation under the influence of a strongly seasonal palaeoclimate that involves a pronounced seasonal peak in precipitation and runoff.

The impact of AMO and NAO in Western Iberia during the Late Holocene

NASA Astrophysics Data System (ADS)

Hernandez, A.; Leira, M.; Trigo, R.; Vázquez-Loureiro, D.; Carballeira, R.; Sáez, A.

2016-12-01

High mountain lakes in the Iberian Peninsula are particularly sensitive to the influence of North Atlantic large-scale modes of climate variability due to their geographical position and the reduced anthropic disturbances. In this context, Serra da Estrela (Portugal), the westernmost range of the Sistema Central, constitutes a physical barrier to air masses coming from the Atlantic Ocean. However, long-term climate reconstructions have not yet been conducted. We present a climate reconstruction of this region based on facies analysis, X-ray fluorescence core scanning, elemental and isotope geochemistry on bulk organic matter and a preliminary study of diatom assemblages from the sedimentary record of Lake Peixão (1677 m a.s.l.; Serra da Estrela) for the last ca. 3500 years. A multivariate statistical analysis has been performed to recognize the main environmental factors controlling the sedimentary infill. Our results reveal that two main processes explain the 70% of the total variance. Thus, changes in primary productivity, reflected in organic matter accumulation, and variations in runoff, related to external particles input, explain 53% and 17% respectively. Additionally, evidence of changes in productivity and water level regime recorded as variations in diatom assemblages correlate well with our interpretations. A comparison between the lake productivity changes and previous Atlantic Multidecadal Oscillation (AMO) reconstructions shows a good correlation, suggesting this climate mode as the main driver over lacustrine primary productivity at multi-decadal scales. In turn, changes in terrigenous inputs, linked to precipitation, seem to be more influenced by the winter North Atlantic Oscillation (NAO) variability. Hence, our results highlight that although the climate regime in this area is clearly influenced by the NAO, the AMO also plays a key role at long-term time-scales.

The sedimentary organic matter from a Lake Ichkeul core (far northern Tunisia): Rock-Eval and biomarker approach

NASA Astrophysics Data System (ADS)

Affouri, Hassène; Sahraoui, Olfa

2017-05-01

The vertical distributions of bulk and molecular biomarker composition in samples from a ca. 156 cm sediment core from Lake Ichkeul were determined. Bulk analysis (Rock-Eval pyrolysis, carbonate, lipid extraction) and molecular analysis of saturated fractions were used to characterize the nature, preservation conditions and input of sedimentary organic matter (OM) to this sub-wet lake environment. The sediments are represented mainly by gray-black silty-clay facies where the carbonate (CaCO3) content varies in a range of 10-30% dry sediment. Rock-Eval pyrolysis revealed a homogeneous total organic carbon (TOC) content of ca. 1% sediment, but with down core fluctuation, indicating different anoxic conditions at different depths and material source variation. The values show three periods of relative enrichment, exceeding ca. 1%, at 146-134 cm, 82 cm and 14-0 cm depth. The low Hydrogen Index (HI) values [<119 mg hydrocarbon (HC)/g TOC)] were characteristic of continental Type III OM. The Tmax values in the range 415-420 °C were characteristic of immature OM at an early diagenetic stage. The distributions of n-alkanes (C17 to C34), isoprenoid (iso) alkanes (pristane and phytane), terpanes and steranes showed that the OM is a mixture of marine algal and bacterial source and emergent and floating higher plant origin. In addition, the distributions, as well as several biomarker ratios (n-alkanes, iso-alkanes/n-alkanes), showed that the OM is a mixture of immature and mature. Significant downcore fluctuation was observed in the molecular composition. This indicates intense microbial activity below ca. 50 cm core depth under an anoxic and brackish environment.

Comparison of the evolution of the sediment dynamics of a bay and an estuary in the East coast of the English Channel: the case of the Bay of Somme and the Seine estuary (France)

NASA Astrophysics Data System (ADS)

Cuvilliez, A.; Le Bot, S.; Michel, C.; Cuvilliez, C.

2017-12-01

The economical roles and the ecological importance of the intertidal zones of mouth the Seine estuary (25 Km²) and of the Bay of Somme (70 Km²), both located on the East coast of the English Channel (Fig. 1A and Fig. 1B), have led to numerous studies on sediment dynamics since the beginning of the 19th century. Since 1995, the high resolution remote sensing (8 cm per side of pixel) allowed an exhaustive study of these intertidal surfaces. Altimetric surveys using radials, notably with ALTUS altimeters, then with LiDAR, were carried out in order to estimate more accurately the volumes and the nature of the sediments that infill these areas. The study of sedimentary facies further improved our understanding of the roles of the environmental forcing which controls sedimentation dynamics. Indeed, it allows foreseeing hydraulic circulation issues which damage these coastal ecosystems, and which can thus be prevented. Subsequently, for more than a decade, these two macrotidal zones, which have a tidal range equal to or greater than 8.5 m, show a decrease in their settling surface size which fosters mud deposition, and an acceleration of their sand infilling. Since 2005, year that marks the completion of the work of the so-called "Port 2000" harbour, the Seine estuary has increased its intertidal areas by almost 45% (<+7.5 m) (Fig.1C), of which 69% are occupied by sandy or silty sediments brought by the flood tides. In the Bay of Somme, only the low-lying intertidal areas (<+ 3.5m) are infilled with sandy sediments, representing 88% of the total deposits (Fig. 1D). In this case, the study of the sedimentary facies reveals that the littoral drift and the action of the waves linked to the tide are mainly responsible of the infill. If sedimentary infilling is a widespread characteristic of estuaries and bays which started with the Holocene transgression, this phenomenon is accentuated with the sea level rise and is greatly amplified with port developments that tend to limit the action of the river flow.

Coastal circulation and sediment dynamics in Hanalei Bay, Kaua'i, Hawaii: Part II: tracking recent fluvial sedimentation; isotope stratigraphy obtained in Summer 2005

USGS Publications Warehouse

Draut, Amy E.; Field, Michael E.; Bothner, Michael H.; Logan, Joshua B.; Casso, Michael A.; Baldwin, Sandra M.; Storlazzi, Curt D.

2006-01-01

Delivery and dispersal of fluvial sediment in Hanalei Bay, Kaua’i, Hawaii, have important implications for the health of local coral reefs. The reef community in Hanalei Bay represents a relatively healthy ecosystem. However, the reefs are periodically stressed by storm waves, and increases in sediment and dissolved substances from the Hanalei River have the potential to cause additional stress. Increased turbidity and sedimentation on corals during Hanalei River floods that occur in seasons of low wave energy, when sediment would not be readily remobilized and advected out of the bay, could affect the health and sustainability of coral reefs and the many associated species. Measurements of short-lived isotopes 7Be and 137Cs in sediment cores have been used to trace the thickness and distribution of terrestrial sediment in Hanalei Bay, in order to assess spatial and temporal patterns of sediment deposition and remobilization relative to coral-reef locations. A third isotope, 210Pb, derived primarily from seawater, provides additional information about recent sedimentary history. Isotope profiles and observations of sedimentary facies from cores collected at multiple locations in June 2005, and again in August 2005, indicate the presence of recent fluvial sediment and organic debris in the east part of the bay near the mouth of the Hanalei River. Away from the immediate vicinity of the river mouth, sediment in the uppermost 1 m below the sea floor had not retained a significant quantity of fluvial sediment within the eight months prior to either sampling effort. During the study interval in summer 2005 the Hanalei River had no major floods and there was relatively little sediment input to the bay. Sediment away from the river mouth was dominated by carbonate sand, although some terrestrial sediment was present in sub-sea-floor horizons. Sedimentary facies and isotope inventories throughout the bay showed substantial spatial heterogeneity. Sediment cores will be collected again at the same sites discussed here during early and late summer 2006. If possible, additional sites will be sampled in the Black Hole depocenter near the river mouth. Major floods in winter and spring 2006 are expected to leave a significant new sediment signal in the bay that should be detected in summer 2006.

A facies model for a quaternary andesitic composite volcano: Ruapehu, New Zealand

NASA Astrophysics Data System (ADS)

Hackett, W. R.; Houghton, B. F.

1989-01-01

Ruapehu composite volcano is a dynamic volcanic-sedimentary system, characterised by high accumulation rates and by rapid lateral and vertical change in facies. Four major cone-building episodes have occurred over 250 Ka, from a variety of summit, flank and satellite vents. Eruptive styles include subplinian, strombolian, phreatomagmatic, vulcanian and dome-related explosive eruptions, and extrusion of lava flows and domes. The volcano can be divided into two parts: a composite cone of volume 110 km3, surrounded by an equally voluminous ring plain. Complementary portions of Ruapehu's history are preserved in cone-forming and ring plain environments. Cone-forming sequences are dominated by sheet- and autobrecciated-lava flows, which seldom reach the ring plain. The ring plain is built predominantly from the products of explosive volcanism, both the distal primary pyroclastic deposits and the reworked material eroded from the cone. Much of the material entering the ring plain is transported by lahars either generated directly by eruptions or triggered by the high intensity rain storms which characterise the region. Ring plain detritus is reworked rapidly by concentrated and hyperconcentrated streams in pulses of rapid aggradation immediately following eruptions and more gradually in the longer intervals between eruptions.

Shallow stratification prevailed for ∼1700 to ∼1300 Ma ocean: Evidence from organic carbon isotopes in the North China Craton

NASA Astrophysics Data System (ADS)

Luo, Genming; Junium, Christopher K.; Kump, Lee R.; Huang, Junhua; Li, Chao; Feng, Qinglai; Shi, Xiaoying; Bai, Xiao; Xie, Shucheng

2014-08-01

The Late Paleoproterozoic to Early Mesoproterozoic (from ∼1700 Ma to ∼1300 Ma) was highlighted by the assembly of the Nuna supercontinent, expansion of euxinic marine environments and apparent stasis in the diversity of eukaryotes. The isotopic composition of carbonate carbon (δ13Ccarb) was surprisingly constant during this interval, but little is known about the secular variation in the organic carbon isotopic composition (δ13Corg). Here we report δ13Corg data from the latest Paleoproterozoic (>1650 Ma) to Early Mesoproterozoic (∼1300 Ma) succession in North China. The δ13Corg values range from -25‰ to -34‰, and are dependent on sedimentary facies. In subtidal and deeper environments δ13Corg values are low and constant, ca. -32‰, but relatively enriched and more variable in shallower intertidal and supratidal environments. We attribute the facies-dependent variation in δ13Corg to the presence of a shallow chemocline. A probable result of a shallow chemocline is that it supported significant contributions of organic matter produced by chemoautotrophic and/or anaerobic photoautotrophic microbes in relatively deep environments from the latest Paleoproterozoic to Early Mesoproterozoic continental shelf of North China.

Prograding coastal facies associations in the Vryheid formation (Permian) at Effingham quarries near Durban, South Africa

NASA Astrophysics Data System (ADS)

Tavener-Smith, R.

1982-05-01

This paper describes and interprets a flat-lying, sandstone—siltstone sequence 70 m thick in three disused quarries. The beds comprise the lowest part of the Vryheid Formation (middle Ecca) in the Durban vicinity. The sequence is conveniently divisible into two parts: the Lower Division constitutes a prograding beach barrier association, while the upper one represents a back barrier lagoonal complex. Fourteen sedimentary facies are described and interpreted to represent a range of depositional environments including open water shelf silts, sandy shoreface and littoral deposits, organic-rich muds and peats of lagoonal origin, a tidal inlet, washover fans and a fluvial channel sand. Among the conclusions reached are that the local middle Ecca coastline extended in a northwest to southeast direction and that progradation was towards the southwest; that the coastline was microtidal and that stormy conditions were common with prevalent palaeowinds from the northwest. The absence of invertebrate body fossils in these strata is attributed to penecontemporaneous solution of shelly remains. This is the first time that a coastal sequence has been identified on the southeast margin of the Main Karoo Basin of South Africa

Modelling of the petroleum formation in the Mahakam sediments (Indonesia): Organic geochemical controls of the results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brosse, E.; Burris, J.; Ouidin, J.L.

1990-06-01

Since the Miocene, the delta of the Mahakam River has accumulated thousands of meters of sediments in the eastern part of the Kutei Basin (Kalimantan, Indonesia). Source-rock candidates are the coals of the deltaic plain and several types of shales, mainly the delta front/prodelta area. Organic matter basically derives from higher plants, but each source facies presents important intrinsic variations of petroleum potential. These variations are overprinted by subsequent maturation trends. Geochemical and petrographical data are integrated on the general framework provided by a new synthetic interpretation of the sedimentary sequences, relying upon the concepts of seismic stratigraphy. From coremore » samples at a given level of maturation, the variations of several organic parameters are discussed in relation to the depositional paleoenvironment and to the possible precursors. 1D and 2D numerical routines are used to reconstruct the maturation history of source rocks. These tools are based upon a kinetic modeling of kerogen cracking. Model outputs are compared with observed maturation trends. The understanding of the initial organic facies distribution provides precise constraints in the selection of a homogenous samples set for this comparison purpose.« less

Multi-proxy geochemical evidence for primary aragonite precipitation in a tropical-shelf 'calcite sea' during the Hirnantian glaciation

NASA Astrophysics Data System (ADS)

Kimmig, Sara R.; Holmden, Chris

2017-06-01

A positive excursion in sedimentary δ26Mg values (2-3‰) is recorded in a mud dominated carbonate succession spanning the Hirnantian glaciation event in a tropical-shelf sea in Nevada. The increase is coincident with lithofacies and biofacies indicators of sea-level change, and previously reported changes in sedimentary δ13C and δ44/40Ca values in the same section. The synchronousness of the isotopic changes is inconsistent with differences in the oceanic residence times of Mg (13 Myr), Ca (0.5-1 Myr), and C (0.1 Myr), indicating that the isotopic trends cannot be attributed to perturbations in the oceanic cycling of these elements. Instead, a mixing analysis (δ26Mg vs. Ca/Mg) reveals that the stratigraphic shift in sedimentary δ26Mg values is an artifact of changing dolomite abundance in the carbonate succession, which increases by an average of ∼12 mol% during the glaciation. The mixing analysis also uncovers stratigraphic changes in end-member limestone δ26Mg values that are tentatively attributed to variations in aragonite abundance. The aragonite, which inverted to calcite during diagenesis, accumulated during the glacio-eustatically controlled sea-level lowstand in the study setting. Although this interpretation is vulnerable to diagenetic effects that are difficult to evaluate, it is strengthened by shifts to lower δ44/40Ca values and higher δ13C values in the same section. Experiments show that aragonite can precipitate in seawater with the chemistry of a 'calcite sea' at temperatures above 20-23 °C. Considering the warm climates of the early Paleozoic, temperatures above this range were likely common in low latitudes. This study shows that the isotopes of Mg, Ca, and C have the potential to fingerprint aragonite that has inverted to calcite in the rock record. It is important recognize carbonate successions where this has occurred so as to avoid misinterpreting facies-dependent changes in carbonate polymorph mineralogy as genuine records of secular changes in the elemental and isotopic geochemistry of seawater.

The Offlap Break Position Vs Sea Level: A Discussion

NASA Astrophysics Data System (ADS)

Tropeano, M.; Pieri, P.; Pomar, L.; Sabato, L.

Sedimentary lithosomes with subhorizontal topsets, basinward prograding foresets and subhorizontal bottomsets are common in the geologic record, and most of them display similar bedding architectures and/or seismic reflection patterns (i.e. Gylbert- type deltas and shelf wedges). Nevertheless, in shallow marine settings these bodies may form in distinct sedimentary environments and they result from different sed- imentary processes. The offlap break (topset edge) occurs in relation to the posi- tion of baselevel and two main groups of lithosomes can be differentiated with re- spect to the position of the offlap break within the shelf profile. The baselevel of the first group is the sea level (or lake level); the topsets are mainly composed by continental- or very-shallow-water sedimentary facies and the offlap break practi- cally corresponds to the shoreline. Exemples of these lithosomes are high-constructive deltas (river-dominated deltas) and prograding beaches. For the second group, base- level corresponds to the base of wave/tide traction, and their topsets are mostly composed by shoreface/nearshore deposits. Examples of these lithosomes are high- destructive deltas (wave/tide-dominated deltas) and infralittoral prograding wedges (i.e Hernandez-Molina et al., 2000). The offlap break corresponds to the shelf edge (shoreface edge), which is located at the transition between nearshore and offshore set- tings, where a terrace prodelta- or transition-slope may develop (Pomar &Tropeano, 2001). Two main problems derive from these alternative interpretations of shallow- marine seaward prograding lithosomes: 1) both in ancient sedimentary shallow-marine successios (showing seaward prograding foresets) and in high resolution seismic pro- files (showing shelf wedges), the offlap break is commonly considered to correspond to the sea-level (shoreline) and used to inferr paleo sea-level positions and to construct sea-level curves. Without a good facies control, this use of the offlap break might cause a misinterpretation of the ancient sea-level positions and the inferred relative sea-level changes. 2) both baselevels, the sea level and the wave/tide base, govern sedimentary accumulation in wave/tide dominated shelves and, consequently, two offlap breaks may coexist (beach edge and shoreface edge) in shallow-marine depositional profiles (Carter et al., 1991). In this setting, two seaward-clinobedded lithosomes, separated by an unconformity, may develop during relative still-stand or falls of the sea-level (Hill et al., 1998). In this case, the two stacked lithosomes could be misinterpreted as two different systems tracts, or sequences, and it could led to the construction of an 1 uncorrect curve of sea-level changes. Carter R.M., Abbott S.T., Fulthorpe C.S., Haywick D.W. and Henderson R.A. (1991): Application of global sea-level and sequence-stratigraphic models in Southern Hemi- sphere Neogene strata from New Zealand. Sp. Publ. IAS, 12, 41-65. Hernández- Molina F.J., Fernández-Salas L.M., Lobo F., Somoza L., Diaz-del-Rio V. and Alver- inho Dias J.M. (2000): The infralittoral prograding wedge: a new large-scale prograda- tional sedimentary body in shallow marine environments. Geo-Marine Letters, 20, 109-117. Hill P.R., Longuépée H. and Roberge M. (1998). Live from Canada: forced regression in action; deltaic shoreface sandbodies being formed. Abstracts, 15th Int. Cong. IAS, Alicante (Spain), 427-428. Pomar L. and Tropeano M. (2001). The Cal- carenite di Gravina Formation in Matera (southern Italy): new insights for coarse- grained, large-scale, cross-bedded bodies encased in offshore deposits. AAPG Bull., 85, 661-689. 2

ChemCam Compositional Results from the Shaler Outcrop in Gale Crater, Mars (Invited)

NASA Astrophysics Data System (ADS)

Anderson, R. B.; Leveille, R. J.; Vaniman, D.; Williams, J.; Clegg, S. M.; Le Mouelic, S.; Wiens, R. C.; Edgar, L. A.; Newsom, H. E.; Clark, B. C.; Ollila, A.; Lewis, K. W.; Gupta, S.; Team, M.

2013-12-01

The Curiosity rover first visited the outcrop known as 'Shaler' on Sol 121 of the mission. The ~1 m thick outcrop is the 'type section' for the Shaler member, which forms the uppermost part of the Yellowknife Bay formation. The Shaler outcrop exhibits multiple well-exposed cross-bedded facies with typical grain sizes of 1-2 mm, most consistent with fluvial deposition. Initial results from the two Sol 121 observations of Shaler by the ChemCam instrument showed similar composition, with a mix of mafic silicates and feldspar grains. A strong correlation between iron and titanium indicates the possible presence of titanomagnetite or ilmenite. CaO shows an anticorrelation with the total of the measured major elements, suggesting that it may be related to a non-silicate phase such as a salt. The rover returned to the outcrop on Sols 309-324. Because of the rugged nature of the outcrop, much of the exposed rock was not reachable by the rover's robotic arm. However, the ChemCam instrument can collect elemental compositional information out to a range of ~7 m using laser-induced breakdown spectroscopy (LIBS), and can acquire high-resolution images at even greater range. ChemCam analyzed 29 locations using LIBS to determine chemical composition, and four additional locations were imaged with the Remote Micro Imager. The targets analyzed included both fine- and coarse-grained facies, as well as a distinct upper unit which appears darker and less red than other Shaler units in Mastcam images, and lacks the striking alternating resistant and recessive cross-bedding observed in lower Shaler. This upper unit occurs at an elevation similar to the rocks at 'Rocknest', and similar-looking rocks appear across the cratered surface to the south and east of Shaler. Several blocks apparently derived from this upper unit were analyzed by ChemCam to test the hypothesis that the unit is related to rocks observed at Rocknest. Work is ongoing to interpret the results of the ChemCam campaign at Shaler. This work includes localization of individual laser analysis points to relate fine-scaled texture and grain size to chemical compositions, analysis of detectable minor and trace elements, identification of compositional trends related to facies type, comparison with compositions of other stratigraphic units in Gale crater, and chemical classification based on terrestrial sedimentary geochemistry.

Sedimentology and paleoenvironments of a new fossiliferous late Miocene-Pliocene sedimentary succession in the Rukwa Rift Basin, Tanzania

NASA Astrophysics Data System (ADS)

Mtelela, Cassy; Roberts, Eric M.; Hilbert-Wolf, Hannah L.; Downie, Robert; Hendrix, Marc S.; O'Connor, Patrick M.; Stevens, Nancy J.

2017-05-01

This paper presents a detailed sedimentologic investigation of a newly identified, fossiliferous Late Neogene sedimentary succession in the Rukwa Rift Basin, southwestern Tanzania. This synrift deposit is a rare and significant new example of a fossiliferous succession of this age in the Western Branch of East Africa Rift System. The unit, informally termed the lower Lake Beds succession, is late Miocene to Pliocene in age based on cross-cutting relationships, preliminary biostratigraphy, and U-Pb geochronology. An angular unconformity separates the lower Lake Beds from underlying Cretaceous and Oligocene strata. Deposition was controlled by rapid generation of accommodation space and increased sediment supply associated with late Cenozoic tectonic reactivation of the Rukwa Rift and synchronous initiation of the Rungwe Volcanic Centre. The lower Lake Beds, which have thus far only been identified in three localities throughout the Rukwa Rift Basin, are characterized by two discrete lithologic members (herein A and B). The lower Member A is a volcanic-rich succession composed mostly of devitrified volcanic tuffs, and volcaniclastic mudstones and sandstones with minor conglomerates. The upper Member B is a siliciclastic-dominated succession of conglomerates, sandstones, mudstones and minor volcanic tuffs. Detailed facies analysis of the lower Lake Beds reveals various distinctive depositional environments that can be grouped into three categories: 1) alluvial fan; 2) fluvial channel; and 3) flood basin environments, characterized by volcanoclastic-filled lakes and ponds, abandoned channel-fills and pedogenically modified floodplains. Member A represents a shallow lacustrine setting filled by tuffaceous sediments, which grade up into a system of alluvial fans and high-energy, proximal gravel-bed braided rivers. An unconformity marks the contact between the two members. Member B shows an upward transition from a high-energy, gravel-bed braided river system to a sandy braided river system with increasingly abundant floodplain deposits and well-developed paleosols. Vertebrate fossils are sparse in member A, but common in member B, preserved both within pedogenic soil horizons and as isolated elements and microsites within fluvial channel facies associations. Faunal remains include fishes, turtles and crocodylians, along with well-preserved mammal cranial and post-cranial remains. In addition, freshwater gastropod shells are locally present in member A and continental trace fossils, including abundant fossilized termite nests, are present in both members.

Sedimentology and uranium potential of the Inyan Kara Group, near Buffalo Gap, South Dakota. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dandavati, K.S.; Fox, J.E.

1980-04-01

Sedimentary structures, along with textural and compositional evidence gathered from two stratigraphic sections of the Lower Cretaceous Inyan Kara Group in Calico and Fuson Canyons on the southeastern flank of the Black Hills, suggest the following depositional framework: the basal, Chilson Member of the Lakota Formation consists of a series of upward fining sequences deposited in point-bar and flood-plain environments of a northeasterly flowing, meandering river system. Fluvial sandstones in the Chilson include channel-fill, channel margin, crevasse microdelta and levee facies. The Minnewaste Limestone Member and the lower part of the overlying Fuson Member of the Lakota Formation were depositedmore » in low-energy, lacustrine environments. Flood oriented tidal-delta facies overlain by tidal flat deposits in the upper part of the Fuson Member suggest an earlier incursion of the initial Cretaceous seaway, at least locally, than previously documented in the region. Lower Fall River deposits represent northeast-trending barrier bar and northwest-trending deltaic distributary mouth bar facies, reflecting an increase in sediment supply. Upper Fall River sandstones include distributary mouth bar and lower foreshore deposits. Altered sandstones of the basal Chilson Member and the lower part of the Fuson Member in Calico Canyon contain anomalous values of U/sub 3/O/sub 8/. Fossil wood and bone samples are also enriched in trace elements of U, V, and Mo, suggesting that uranium-bearing solutions might have passed through porous and permeable sandstones of the study area, possibly flowing toward the northeast along Chilson paleochannels.« less

Estimation of the tectonic slip-rate from Quaternary lacustrine facies within the intraplate Albacete province (SE of Spain)

USGS Publications Warehouse

Rodriguez-Pascua, M. A.; Bischoff, J.; Garduno-Monroy, Victor H.; Pérez-López, R.; Giner-Robles, J.L.; Israde-Alcántara, I.; Calvo, J.P.; Williams, Ross W.

2009-01-01

The Quaternary lacustrine basin of Cordovilla (CB) represents one of the most active tectonic areas of the Prebetic Zone (Albacete, SE of Spain). The Quaternary sedimentary deposits of this basin are mainly endoreic lacustrine carbonate and alluvial deposits, developed in a semi-arid climate (Pleistocene-present). The basin is a NW-SE-elongated graben bounded by a major right-lateral oblique-fault, the Pozohondo Fault. This fault trends NW-SE, with an approximate trace of 55 km, and is composed of various segments which are identified by fault scarps. In order to establish the slip-rate of the most active segment of the Pozohondo Fault, called the Cordovilla segment, we carried out a detailed study of the affected Quaternary lacustrine deposits. We found that the lacustrine facies could be related to episodic moderate paleoearthquakes. The slip-rate is calculated to be 0.05 and 0.09 mm/yr, using radiometric dating for the vertical offsets of the lacustrine facies. A trenching study at the northern part of the Cordovilla segment revealed two events caused by paleoearthquakes, with the most recent expressed as an oblique-fault off-setting a poorly-developed soil. The magnitude of the last event was greater than 6, using various empirical relationships for the fault displacement and the surface-length rupture. We estimate episodic activity across the Cordovilla segment, to be characterized by moderate-sized paleoearthquakes (M6), which is in agreement with the tectonic context of an intraplate zone of the Iberian plate. ?? 2009 Elsevier B.V.

The potential of detrital garnet as a provenance proxy in the Central Swiss Alps

NASA Astrophysics Data System (ADS)

Stutenbecker, Laura; Berger, Alfons; Schlunegger, Fritz

2017-04-01

Detrital garnet is a promising candidate to reliably fingerprint sediment sources in the Alps, which has so far been complicated by the wide range and similarity of some of the lithologies. Garnet is present in most Alpine sediments, is easy to identify, is fairly stable and, most importantly, reflects the type and the metamorphic grade of its source rock in its chemical composition. This study aims to establish fingerprints based on detrital garnet composition for the most important tectonic units of the Central Alps, including European, Penninic and Adriatic basement rocks and their respective metasedimentary covers. Sediments collected from modern rivers, which drain representative portions of the individual tectonic units, contain a natural mixture of the various garnet populations present in each unit. We selected six catchments in southwestern Switzerland draining the External massifs, Helvetic sediments and the Penninic nappe stack at the transition of Alpine greenschist- to amphibolite-facies metamorphism in order to test the variability of Alpine garnets and the role of inherited (pre-Alpine) garnets. Extraordinary grossular- and spessartine-rich garnets of the External massifs, which experienced greenschist facies metamorphism, are clearly distinguishable from generally almandine-rich garnets supplied by the higher-grade metamorphic Penninic nappe stack. The variable pyrope, grossular and spessartine components of these almandine-rich garnets can be used to further distinguish pre-Alpine, Alpine eclogite-facies and low-grade metasedimentary garnets. This provenance proxy has the potential to be used for reconstructing sediment sources, transport and dispersal patterns in a variety of settings throughout the Alpine sedimentary record.

Initial India-Asia Collision: Sedimentologic, Paleomagnetic and Paleontologic Evidence From the Ghazij Formation, Balochistan, Pakistan

NASA Astrophysics Data System (ADS)

Clyde, W. C.; Khan, I. H.; Gingerich, P. D.

2003-12-01

Initial continental collision between India and Asia is thought to have caused significant changes to global climate and biota, yet its timing and biogeographic consequences are uncertain. Structural and geophysical evidence indicates initial collision during the early Paleogene, but sedimentary evidence of this has been controversial owing to the intense deformation and metamorphism along the suture zone. Modern orders of mammals that appeared abruptly on northern continents coincident with the global warming event marking the Paleocene-Eocene boundary are hypothesized to have originated on the Indian subcontinent, but no relevant paleontologic information has been available to test this idea. Here we present sedimentologic, paleomagnetic, and paleontologic results that show the lower Eocene Ghazij Formation of western Pakistan records continental sedimentation and mammalian dispersal associated with initial India-Asia collision. Sedimentologically, the Ghazij exhibits a clear transition from shallow-marine facies in the lower part, to paralic deltaic facies in the middle part, and continental fluvial facies in the upper part. Paleomagnetic data indicate that Ghazij deposition occurred just before a pronounced decrease in the sea-floor spreading rate of the Indian Ocean. Large fossil mammal assemblages show strong endemism in the middle part of the formation but increasing cosmopolitanism and affiliation with northern continents higher in the formation. Our results support the hypothesis that initial continent-continent contact occurred near the Paleocene-Eocene boundary along the northwest edge of the Indo-Pakistan plate and that subsequent closure occurred diachronously along the rest of the suture. However, it appears that during initial collision, modern orders of mammals dispersed into India rather than out of it.

Early Proterozoic magmatism and tectonism related to southward-dipping subduction and microcontinental accretion in central Wisconsin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maass, R.S.; Brown, B.A.

1992-01-01

A polydeformed and polymetamorphosed terrane of Archean and lower Proterozoic volcanic, plutonic, and sedimentary rocks is exposed in central Wisconsin. The central Wisconsin terrane (CWT) consists primarily of 2,800 and 2,500 Ma gneisses and 1,820-1,890 Ma igneous rocks emplaced into these gneisses during the Penokean orogeny. North of a poorly define northwest-trending suture zone is the 1,8180-1,890 Ma Penokean island-arc terrane of northern Wisconsin, which lacks Archean rocks. Archean and Penokean metamorphism of the CWT each ranged from lower greenschist to upper amphibolite facies. Grade was typically lower to upper amphibolite facies at 2,800 Ma and lower amphibolite facies duringmore » the Penokean orogeny. Locally, a third metamorphic event, possibly 2,500 Ma, has been recognized. The grade of Penokean metamorphism is spatially related to plutons in some areas, but not in others. Most of the CWT underwent one or more phases of deformation during the Penokean orogeny, but at least part of the CWT escaped deformation at this time. A well developed subvertical mineral lineation attributed to diapirism is present in and around many Penokean plutons. The spatial and temporal pattern of igneous activity suggests that the Penokean orogeny involved two simultaneously operating southward-dipping subduction zones. The northern zone produced the island-arc terrane. The southern zone dipped under the CWT microcontinent, producing a continental arc. Petrographic and isotopic data from subsurface samples suggest that the CWT does not extend into southern Wisconsin.« less

The effect of electromagnetic radiation of wireless connections on morphology of amniotic fluid

NASA Astrophysics Data System (ADS)

Novikov, Vsevolod O.; Titova, Natalia; Azarhov, Olexand; Wójcik, Waldemar; GrÄ dz, Å.»aklin; Mussabekova, Assel

2016-09-01

The article considers the effect of wireless networks on the morphology of amniotic fluid (AF) to demonstrate possible risks involving pregnant women. The analysis of AF thesiograms after exposure of the model fluid to Wi-Fi, 3G and β- radiation was chosen as the research method. A comparative analysis of facies structures is carried out, and depth maps of the facies structure are created. This comparative analysis permits an evaluation of the efficiency of morphological changes. It is shown that AF control facies differ in the concentration of areas with a narrow peripheral area and ellipsoidal formations of crystalloids in circumferences center. After exposure of different types of radiation onto AF, the facies structures collapse and form their own conglomerates. The obtained results show that the considered types of radiation have a negative effect on AF.

Stratigraphy, facies analysis and depositional environments of the Upper Unit of Abu Roash "E" member in the Abu Gharadig field, Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Hewaidy, Abdel Galil; Elshahat, O. R.; Kamal, Samy

2018-03-01

Abu Roach "E" member is of an important hydrocarbon reservoir-producing horizon in the Abu Gharadig Field (north Western Desert, Egypt). This study is used to build facies analysis and depositional environments model for the Upper Unit of the Abu Roash "E" member in Abu Gharadig Field. This target has been achieved throughout the sedimentological, wire line logs, lithostratigraphic and biostratigraphic analyses of more than 528 feet cores. The high-resolution biostratigraphic analysis provides a calibration for the paleo-bathymetry and depositional environmental interpretations. Biozonation and lithostratigraphic markers are used to constrain stratigraphic correlation. Integration between the core description and petorographic microfacies analysis by microscope examination provide an excellent indication for the rock types and depositional environments. Five depositional facies types are detected including carbonate inner ramp, tidal flats, tidal channels, supra-tidal and tide dominated delta facies. This model helps in the understanding of the Upper Unit of Abu Roash "E" member reservoir distribution as well as lateral and vertical facies changes that contribute to the development strategy for the remaining hydrocarbon reserves for this important oil reservoir.

The geology of a part of Acadia and the nature of the Acadian orogeny across Central and Eastern Maine

USGS Publications Warehouse

Tucker, R.D.; Osberg, P.H.; Berry, H.N.

2001-01-01

The zone of Acadian collision between the Medial New England and Composite Avalon terranes is well preserved in Maine. A transect from northwest (Rome) to southeast (Camden) crosses the eastern part of Medial New England comprising the Central Maine basin, Liberty-Orrington thrust sheet, and Fredericton trough, and the western part of Composite Avalon, including the Graham Lake, Clarry Hill, and Clam Cove thrust sheets. U-Pb geochronology of events before, during, and after the Acadian orogeny helps elucidate the nature and distribution of tectonostrati& graphic belts in this zone and the timing of some Acadian events in the Northern Appalachians. The Central Maine basin consists of sedimentary and volcanic rocks of Middle Ordovician (???470 to ???460 Ma) age overlain with probable conformity by latest Ordovician(?) through earliest Devonian marine rift and flysch sedimentary rocks; these are intruded by weakly to undeformed plutonic rocks of Early and Middle Devonian age (???399??378 Ma). The Fredericton trough consists of Early Silurian gray pelite and sandstone to earliest Late Silurian calcareous turbidite, deformed and variably metamorphosed prior to the emplacement of Late Silurian (???422 Ma) and Early to Late Devonian (???418 to ???368 Ma) plutons. The Liberty-Orrington thrust sheet consists of Cambrian(?)-Ordovician (>???474 to ???469 Ma and younger) clastic sedimentary and volcanic rocks intruded by highly deformed Late Silurian (???424 to ???422 Ma) and Devonian (???418 to ???389 Ma) plutons, possibly metamorphosed in Late Silurian time (prior to ???417 Ma), and metamorphosed to amphibolite facies in Early to Middle Devonian time (???400 to ???381 Ma). The Graham Lake thrust sheet contains possible Precambrian rocks, Cambrian sedimentary rocks with a volcanic unit dated at ???503 Ma, and Ordovician rocks with possible Caradocian Old World fossils, metamor& phosed and deformed in Silurian time and intruded by mildly to undeformed Late Silurian (???421 Ma) and Late Devonian (???371 to ???368 Ma) plutons. The Clarry Hill thrust sheet consists of poorly studied, highly metamorphosed Cambrian(?) rocks. The Clam Cove thrust sheet contains highly deformed Precambrian limestone, shale, sandstone, and conglomerate, metamorphosed to epidote amphibolite facies and intruded by a mildly deformed pluton dated at ???421 Ma. Metamorphism, deformation, and voluminous intrusive igneous activity of Silu& rian age are common to both the most southeastern parts of Medial New England and the thrust sheets of Composite Avalon. In contrast to Medial New England, the thrust sheets of Composite Avalon show only modest effects of Devonian deformation and metamorphism. Regional stratigraphic relations, paleontologic findings, and U-Pb geochronology suggest that the Graham Lake, Clarry Hill, and Clam Cove thrust sheets are far-traveled allochthons that were widely separated from Medial New England in the Silurian.

African Homo erectus: old radiometric ages and young Oldowan assemblages in the Middle Awash Valley, Ethiopia.

PubMed

Clark, J D; de Heinzelin, J; Schick, K D; Hart, W K; White, T D; WoldeGabriel, G; Walter, R C; Suwa, G; Asfaw, B; Vrba, E

1994-06-24

Fossils and artifacts recovered from the middle Awash Valley of Ethiopia's Afar depression sample the Middle Pleistocene transition from Homo erectus to Homo sapiens. Ar/Ar ages, biostratigraphy, and tephrachronology from this area indicate that the Pleistocene Bodo hominid cranium and newer specimens are approximately 0.6 million years old. Only Oldowan chopper and flake assemblages are present in the lower stratigraphic units, but Acheulean bifacial artifacts are consistently prevalent and widespread in directly overlying deposits. This technological transition is related to a shift in sedimentary regime, supporting the hypothesis that Middle Pleistocene Oldowan assemblages represent a behavioral facies of the Acheulean industrial complex.

Sedimentology, stratigraphy, and extinctions during the Cretaceous-Paleogene transition at Bug Creek, Montana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fastovsky, D.E.; Dott, R.H. Jr.

1986-04-01

Bug Creek Valley, the source of an unusual and controversial Cretaceous-Paleogene coincidence of mammals, dinosaurs, pollen, and iridium, exemplifies the importance of depositional process in the reconstruction of evolutionary events. Five sedimentary facies are recognized at Bug Creek: a cross-stratified sandstone, a green and purple siltstone, a lateral accretionary sandstone, a coal, and a variegated siltstone. Repeated fluvial channeling restricts the accuracy of lateral correlations, and the relationship of the fossil assemblage to the presumed Cretaceous-Paleogene boundary cannot be established. Sedimentologically, the Cretaceous-Paleogene transition is represented here by Cretaceous meandering channels that gave way initially to Paleogene swamp deposition. 13more » references, 4 figures.« less

Sedimentary fabrics of the macrotidal, mud-dominated, inner estuary to fluvio-tidal transition zone, Petitcodiac River estuary, New Brunswick, Canada

NASA Astrophysics Data System (ADS)

Shchepetkina, Alina; Gingras, Murray K.; Zonneveld, John-Paul; Pemberton, S. George

2016-03-01

The study provides a detailed description of mud-dominated sedimentary fabrics and their application for the rock record within the inner estuary to the fluvial zone of the Petitcodiac River estuary, New Brunswick, Canada. Sedimentological characteristics and facies distributions of the clay- and silt-rich deposits are reported. The inner estuary is characterized by thick accumulations of interbedded silt and silty clay on intertidal banks that flank the tidally influenced channel. The most common sedimentary structures observed are parallel and wavy lamination, small-scale soft-sediment deformation with microfaults, and clay and silt current ripples. The tidal channel contains sandy silt and clayey silt with planar lamination, massive and convolute bedding. The fluvio-tidal transition zone is represented by interbedded trough cross-stratified sand and gravel beds with planar laminated to massive silty mud. The riverine, non-tidal reach of the estuary is characterized by massive, planar tabular and trough cross-stratified gravel-bed deposits. The absence of bioturbation within the inner estuary to the fluvio-tidal transition zone can be explained by the following factors: low water salinities (0-5 ppt), amplified tide and current speeds, and high concentrations of flocculated material in the water body. Notably, downstream in the middle and outer estuary, bioturbation is seasonally pervasive: in those locales the sedimentary conditions are similar, but salinity is higher. In this study, the sedimentological (i.e., grain size, bedding characters, sedimentary structures) differences between the tidal estuary and the fluvial setting are substantial, and those changes occur over only a few hundred meters. This suggests that the widely used concept of an extensive fluvio-tidal transition zone and its depositional character may not be a geographically significant component of fluvial or estuary deposits, which can go unnoticed in the study of the ancient rocks.

Isotopic and elemental chemistry of sedimentary pyrite: A combined analytical and statistical approach to a novel planetary biosignature

NASA Astrophysics Data System (ADS)

Figueroa, M. C.; Gregory, D. D.; Lyons, T. W.; Williford, K. H.

2017-12-01

Life processes affect trace element abundances in pyrite such that sedimentary and hydrothermal pyrite have significantly different trace element signatures. Thus, we propose that these biogeochemical data could be used to identify pyrite that formed biogenetically either early in our planet's history or on other planets, particularly Mars. The potential for this approach is elevated because pyrite is common in diverse sedimentary settings, and its trace element content can be preserved despite secondary overprints up to greenschist facies, thus minimizing the concerns about remobilization that can plague traditional whole rock studies. We are also including in-situ sulfur isotope analysis to further refine our understanding of the complex signatures of ancient pyrite. Sulfur isotope data can point straightforwardly to the involvement of life, because pyrite in sediments is inextricably linked to bacterial sulfate reduction and its diagnostic isotopic expressions. In addition to analyzing pyrite of known biological origin formed in the modern and ancient oceans under a range of conditions, we are building a data set for pyrite formed by hydrothermal and metamorphic processes to minimize the risk of false positives in life detection. We have used Random Forests (RF), a machine learning statistical technique with proven efficiency for classifying large geological datasets, to classify pyrite into biotic and abiotic end members. Coupling the trace element and sulfur isotope data from our analyses with a large existing dataset from diverse settings has yielded 4500 analyses with 18 different variables. Our initial results reveal the promise of the RF approach, correctly identifying biogenic pyrite 97 percent of the time. We will continue to couple new in-situ S-isotope and trace element analyses of biogenic pyrite grains from modern and ancient environments, using cutting-edge microanalytical techniques, with new data from high temperature settings. Our ultimately goal is a refined search tool with straightforward application in the search for early life on Earth and distant life recorded in meteorites, returned samples, and in situ measurements.

Jurassic carbonate microfacies, sea-level changes and the Toarcian anoxic event in the Tethys Himalaya (South Tibet)

NASA Astrophysics Data System (ADS)

Han, Zhong; Hu, Xiumian; Garzanti, Eduardo

2016-04-01

Detailed microfacies analysis of carbonate rocks from the Tingri and Nyalam areas of South Tibet allowed us to reconstruct the evolution of sedimentary environments during the Early to Middle Jurassic. Based on texture, sedimentary structure, grain composition and fossil content of about 500 thin sections, 17 microfacies overall were identified, and three evolutionary stages were defined. Stage 1 (Rhaetian?-lower Sinemurian Zhamure Formation) was characterized by siliciclastic and mixed siliciclastic-carbonate sedimentation on a barrier shore environment, stage 2 (upper Sinemurian-Pliensbachian Pupuga Formation) by high-energy grainstones with rich benthic faunas thriving on a carbonate platform, and stage 3 (Toarcian-lower Bajocian Nieniexiongla Formation) by low-energy mudstones intercalated with frequent storm layers on a carbonate ramp. Besides, Carbon isotope analyses (δ13Ccarb and δ13Corg) were performed on the late Pliensbachian-early Toarcian interval, and the organic matter recorded a pronounced stepped negative excursion -4.5‰ corresponding to characteristics of the early Toarcian oceanic anoxic event globally, which began just below the stage 2-stage 3 facies shifting boundary. The comparison between the Tethys Himalaya (South Tibet) and the tropical/subtropical zones of the Western Tethys and Panthalassa was carried out to discuss the factors controlling sedimentary evolution. The change from stage 1 to stage 2 was possibly induced by sea-level rise, when the Tibetan Tethys Himalaya was located at tropical/subtropical latitudes in suitable climatic and ecological conditions for carbonate sedimentation. The abrupt change from stage 2 to stage 3 is interpreted as a consequence of the early Toarcian oceanic anoxic event, accompanied by obvious carbon-isotope negative excursion and sea-level rise. The failed recovery from the carbonate crisis in the early Bajocian, with continuing deposition on a low-energy carbonate ramp, is ascribed to the tectonic moving towards higher latitudes.

Determining the Accuracy of Paleomagnetic Remanence and High-Resolution Chronostratigraphy for Sedimentary Rocks using Rock Magnetics

NASA Astrophysics Data System (ADS)

Kodama, K. P.

2017-12-01

The talk will consider two broad topics in rock magnetism and paleomagnetism: the accuracy of paleomagnetic remanence and the use of rock magnetics to measure geologic time in sedimentary sequences. The accuracy of the inclination recorded by sedimentary rocks is crucial to paleogeographic reconstructions. Laboratory compaction experiments show that inclination shallows on the order of 10˚-15˚. Corrections to the inclination can be made using the effects of compaction on the directional distribution of secular variation recorded by sediments or the anisotropy of the magnetic grains carrying the ancient remanence. A summary of all the compaction correction studies as of 2012 shows that 85% of sedimentary rocks studied have enjoyed some amount of inclination shallowing. Future work should also consider the effect of grain-scale strain on paleomagnetic remanence. High resolution chronostratigraphy can be assigned to a sedimentary sequence using rock magnetics to detect astronomically-forced climate cycles. The power of the technique is relatively quick, non-destructive measurements, the objective identification of the cycles compared to facies interpretations, and the sensitivity of rock magnetics to subtle changes in sedimentary source. An example of this technique comes from using rock magnetics to identify astronomically-forced climate cycles in three globally distributed occurrences of the Shuram carbon isotope excursion. The Shuram excursion may record the oxidation of the world ocean in the Ediacaran, just before the Cambrian explosion of metazoans. Using rock magnetic cyclostratigraphy, the excursion is shown to have the same duration (8-9 Myr) in southern California, south China and south Australia. Magnetostratigraphy of the rocks carrying the excursion in California and Australia shows a reversed to normal geomagnetic field polarity transition at the excursion's nadir, thus supporting the synchroneity of the excursion globally. Both results point to a primary depositional origin for the excursion, and strengthens the argument for oxidation of the world ocean in the Ediacaran. Future work must learn how global climate is encoded by rock magnetics, but our work to date suggests that variations in continental run-off are detected by rock magnetics.

Reconstructed Oceanic Sedimentary Sequence in the Cape Three Points Area, Southern Axim-Konongo (Ashanti) Greenstone Belt in the Paleoproterozoic Birimian of Ghana.

NASA Astrophysics Data System (ADS)

Kiyokawa, S.; Ito, T.; Frank, N. K.; George, T. M.

2014-12-01

The Birimian greenstone belt likely formed through collision between the West African and Congo Cratons ~2.2 Ga. Accreted greenstone belts that formed through collision especially during the Palaeoproterozoic are usually not only good targets for preservation of oceanic sedimentary sequences but also greatly help understand the nature of the Paleoproterozoic deeper oceanic environments. In this study, we focused on the coastal area around Cape Three Points at the southernmost part of the Axim-Konongo (Ashanti) greenstone belt in Ghana where excellently preserved Paleoprotrozoic deeper oceanic sedimentary sequences extensively outcrop. The Birimian greenstone belt in both the Birimian rock (partly Sefwi Group) and Ashanti belts are separated from the Tarkwaian Group which is a paleoplacer deposit (Perrouty et al., 2012). The Birimian rock was identified as volcanic rich greenstone belt; Kumasi Group is foreland basin with shale and sandstone, quartzite and turbidite derived from 2.1 Ga granite in the Birimian; Tarkwaian Group is composed of coarse detrital sedimentary rocks deposited along a strike-slip fault in the Birimian. In the eastern part of the Cape Three Point area, over 4km long of volcanic-sedimentary sequence outcrops and is affected by greenschist facies metamorphism. Four demarcated zones along the coast as Kutike, Atwepo, Kwtakor and Akodaa zones. The boundaries of each zone were not observed, but each zone displays a well preserved and continuous sedimentary sequence. Structurally, this region is west vergent structure and younging direction to the East. Kutike zone exhibits synform structure with S0 younging direction. Provisional stratigraphic columns in all the zones total about 500m thick. Kutike, Atwepo zones (> 200m thick) have coarsening upward characteristics from black shale to bedded volcanic sandstone. Kwtakor zone (> 150m) is the thickest volcaniclastic sequence and has fining upward sections. Akodaa zone (> 150m) consists of finer bed of volcaniclastics with black shales and has fining upward character. This continuous sequence indicate distal portion of submarine volcaniclastic section in an oceanic island arc between the West African and Congo Cratons.

Organic geochemistry in Pennsylvanian tidally influenced sediments from SW Indiana

USGS Publications Warehouse

Mastalerz, Maria; Kvale, E.P.; Stankiewicz, B.A.; Portle, K.

1999-01-01

Tidal rhythmites are vertically stacked small-scale sedimentary structures that record daily variations in tidal current energy and are known to overlie some low-sulfur coals in the Illinois Basin. Tidal rhythmites from the Pennsylvanian Brazil Formation in Indiana have been analyzed sedimentologically, petrographically, and geochemically in order to understand the character and distribution of organic matter (OM) preserved in an environment of daily interactions between marine and fresh waters. The concentration of organic matter (TOC) ranges from traces to 6.9% and sulfur rarely exceeds 0.1% in individual laminae. Angular vitrinite is the major organic matter type, accounting for 50-90% of total OM. The C/S ratio decreases as the verfical distance from the underlying coal increases. A decreasing C/S ratio coupled with decreases in Pr/Ph, Pr/n-C17, Ph/n-C18 ratios and a shift of carbon isotopic composition towards less negative values suggest an increase in salinity from freshwater in the mudflat tidal rhythmite facies close to the coal to brackish/marine in the sandflat tidal rhythmite facies further above from the coal. Within an interval spanning one year of deposition, TOC and S values show monthly variability. On a daily scale, TOC and S oscillations are still detectable but they are of lower magnitude than on a monthly scale. These small-scale variations are believed to reflect oscillations in water salinity related to tidal cycles.Tidal rhythmites are vertically stacked small-scale sedimentary structures that record daily variations in tidal current energy and are known to overlie some low-sulfur coals in the Illinois Basin. Tidal rhythmites from the Pennsylvanian Brazil Formation in Indiana have been analyzed sedimentologically, petrographically, and geochemically in order to understand the character and distribution of organic matter (OM) preserved in an environment of daily interactions between marine and fresh waters. The concentration of organic matter (TOC) ranges from traces to 6.9% and sulfur rarely exceeds 0.1% in individual laminae. Angular vitrinite is the major organic matter type, accounting for 50-90% of total OM. The C/S ratio decreases as the vertical distance from the underlying coal increases. A decreasing C/S ratio coupled with decreases in Pr/Ph, Pr/n-C17, Ph/n-C18 ratios and a shift of carbon isotopic composition towards less negative values suggest an increase in salinity from freshwater in the mudflat tidal rhythmite facies close to the coal to brackish/marine in the sandflat tidal rhythmite facies further above from the coal. Within an interval spanning one year of deposition, TOC and S values show monthly variability. On a daily scale, TOC and S oscillations are still detectable but they are of lower magnitude than on a monthly scale. These small-scale variations are believed to reflect oscillations in water salinity related to tidal cycles.

Coarse cross-bedded grainstones in a mid- to outer carbonate ramp, Bartonian of the Urbasa-Andia plateau (W Pyrenees, N Spain)

NASA Astrophysics Data System (ADS)

Baceta, José I.; Pomar, Luis; Mateu-Vicens, Guillem

2017-04-01

Most marine grainstones in carbonate ramps and platforms are commonly interpreted to form in high-energy, shallow-water settings where wave energy dissipates by friction on the sea floor. The locus of energy dissipation varies with platform type. On rimmed shelves, skeletal-oolitic sands mainly accumulate near the wave-agitated shelf margin as a rim, which restricts wave action and a low-energy lagoon may form landwards. On ramps and open platforms, by contrast, grainstones commonly accumulate in the shallower zone near or attached to the shoreline, grading basinward into muddier carbonate successions. Within this conceptual scheme, most carbonate ramp subdivisions have been established according to the facies and sedimentary structures associated to the bathymetry-related hydraulic regime, in which the bases of the surface storm-waves and the fairweather waves are the boundary layers. Since seagrasses encroached the oceans by the late Cretaceous, baffling the surface wave energy, and burrowing activity increased significantly, most Cenozoic ramp successions lack the bathymetry-related sedimentary structures and the record of wave and storm activity is commonly lost. This has induced ramp subdivision to become progressively based in light penetration, as inferred from the light dependence of the carbonate producers, particularly for the Cenozoic. This new scenario has permitted to recognize grainstone units detached from shoreline and shoals and produced at depths near the limit of light penetration, or even below, in basinal settings. Here we document a 90-100-m thick Eocene example of crossbedded skeletal grainstones composed by echinoderm-, bryozoan-, red-algal fragments and orthophragminid larger benthic foraminifers. This facies belt occurs at 20-km from the paleo-coastline, downdip of Nummulites-Discocyclina facies, and passes basinward into finely comminuted skeletal debris and marls with planktonic foraminifers of the outer ramp. The skeletal composition of the cross-bedded belt indicates carbonate production to have occurred near the lower limit of the light penetration, and hydraulic turbulence to rework the coarser sediments and winnow-away de fines at the transition between middle- and outer ramp. Bedform migration indicates two main flow directions: oblique upslope traction currents (run-up) and downslope backwash return flow. This indicates turbulence to be detached from the surface storm waves and suggests internal waves breaking obliquely to the slopping ramp. This example documents the potential role of internal waves in shaping and redistributing sediments across ancient carbonate ramp systems, producing porous bodies close to basinal facies. These grainstone bodies may become good targets but acquire special relevance when prediction of good drains is needed in both exploration and production of unconventional. ACKNOWLEDGEMENTS Funding from Ministerio de Economía y Competitividad Project CGL2014-52096-P is acknowledged. This is also a contribution to the Research Group of the Basque University System IT-930-16.

Depositional and tectonic setting of the Archean Moodies Group, Barberton Greenstone Belt, South Africa

NASA Technical Reports Server (NTRS)

Heubeck, C.; Lowe, D. R.

1994-01-01

The 3.22-3.10 Ga old Moodies Group, uppermost unit of the Swaziland Supergroup in the Barberton Greenstone Belt (BGB), is the oldest exposed, well-preserved quartz-rich sedimentary sequence on earth. It is preserved in structurally separate blocks in a heavily deformed fold-and-thrust belt. North of the Inyoka Fault, Moodies strata reach up to 3700 m in thickness. Detailed mapping, correlation of measured sections, and systematic analysis of paleocurrents show that the lower Moodies Group north of the Inyoka Fault forms a deepening- and fining-upward sequence from a basal alluvial conglomerate through braided fluvial, tidal, and deltaic sandstones to offshore sandy shelf deposits. The basal conglomerate and overlying fluvial facies were derived from the north and include abundant detritus eroded from underlying Fig Tree Group dacitic volcanic rocks. Shoreline-parallel transport and extensive reworking dominate overlying deltaic, tidal, and marine facies. The lithologies and arrangement of Moodies Group facies, sandstone petrology, the unconformable relationship between Moodies strata and older deformed rocks, presence of at least one syndepositional normal fault, and presence of basaltic flow rocks and airfall fall tuffs interbedded with the terrestrial strata collectively suggest that the lower Moodies Group was deposited in one or more intramontane basins in an extensional setting. Thinner Moodies sections south of the Inyoka Fault, generally less than 1000 m thick, may be correlative with the basal Moodies Group north of the Inyoka Fault and were probably deposited in separate basins. A northerly derived, southward-thinning fan-delta conglomerate in the upper part of the Moodies Group in the central BGB overlies lower strata with an angular unconformity. This and associated upper Moodies conglomerates mark the beginning of basin shortening by south- to southeast-directed thrust faulting along the northern margin of the BGB and suggest that the upper Moodies Group was deposited in a foreland basin. Timing, orientation, and style of shortening suggest that this deformation eventually incorporated most of the BGB into a major fold-and-thrust belt.

Lateral and vertical facies relationships of bedforms deposited by aggrading supercritical flows: From cyclic steps to humpback dunes

NASA Astrophysics Data System (ADS)

Lang, Jörg; Winsemann, Jutta

2013-10-01

The preservation of bedforms related to supercritical flows and hydraulic jumps is commonly considered to be rare in the geologic record, although these bedforms are known from a variety of depositional environments. This field-based study presents a detailed analysis of the sedimentary facies and stacking pattern of deposits of cyclic steps, chutes-and-pools, antidunes and humpback dunes from three-dimensional outcrops. The well exposed Middle Pleistocene successions from northern Germany comprise glacilacustrine ice-contact subaqueous fan and glacial lake-outburst flood deposits. The studied successions give new insights into the depositional architecture of bedforms related to supercritical flows and may serve as an analogue for other high-energy depositional environments such as fluvial settings, coarse-grained deltas or turbidite systems. Deposits of cyclic steps occur within the glacial lake-outburst flood succession and are characterised by lenticular scours infilled by gently to steeply dipping backsets. Cyclic steps formed due to acceleration and flow thinning when the glacial lake-outburst flood spilled over a push-moraine ridge. These bedforms are commonly laterally and vertically truncated and alternate with deposits of chutes-and-pools and antidunes. The subaqueous fan successions are dominated by laterally extensive sinusoidal waveforms, which are interpreted as deposits of aggrading stationary antidunes, which require quasi-steady flows at the lower limit of the supercritical flow stage and high rates of sedimentation. Humpback dunes are characterised by downflow divergent cross-stratification, displaying differentiation into topsets, foresets and bottomsets, and are interpreted as deposited at the transition from subcritical to supercritical flow conditions or vice versa. Gradual lateral and vertical transitions between humpback dunes and antidune deposits are very common. The absence of planar-parallel stratification in all studied successions suggests that the formation of these bedforms is suppressed in flows characterised by hydraulic jumps under highly aggradational conditions. The large-scale lateral and vertical successions of bedforms are interpreted as representing the temporal and spatial evolution of the initial supercritical flows, which was strongly affected by the occurrence of hydraulic jumps. Small-scale facies changes and the formation of individual bedforms are interpreted as controlled by fluctuating discharge, bed topography and pulsating unstable flows.

Facies analysis, depositional environments and paleoclimate of the Cretaceous Bima Formation in the Gongola Sub - Basin, Northern Benue Trough, NE Nigeria

NASA Astrophysics Data System (ADS)

Shettima, B.; Abubakar, M. B.; Kuku, A.; Haruna, A. I.

2018-01-01

Facies analysis of the Cretaceous Bima Formation in the Gongola Sub -basin of the Northern Benue Trough northeastern Nigeria indicated that the Lower Bima Member is composed of alluvial fan and braided river facies associations. The alluvial fan depositional environment dominantly consists of debris flow facies that commonly occur as matrix supported conglomerate. This facies is locally associated with grain supported conglomerate and mudstone facies, representing sieve channel and mud flow deposits respectively, and these deposits may account for the proximal alluvial fan region of the Lower Bima Member. The distal fan facies were represented by gravel-bed braided river system of probably Scot - type model. This grade into sandy braided river systems with well developed floodplains facies, forming probably at the lowermost portion of the alluvial fan depositional gradient, where it inter-fingers with basinal facies. In the Middle Bima Member, the facies architecture is dominantly suggestive of deep perennial sand-bed braided river system with thickly developed amalgamated trough crossbedded sandstone facies fining to mudstone. Couplets of shallow channels are also locally common, attesting to the varying topography of the basin. The Upper Bima Member is characterized by shallow perennial sand-bed braided river system composed of successive succession of planar and trough crossbedded sandstone facies associations, and shallower channels of the flashy ephemeral sheetflood sand - bed river systems defined by interbedded succession of small scale trough crossbedded sandstone facies and parallel laminated sandstone facies. The overall stacking pattern of the facies succession of the Bima Formation in the Gongola Sub - basin is generally thinning and fining upwards cycles, indicating scarp retreat and deposition in a relatively passive margin setting. Dominance of kaolinite in the clay mineral fraction of the Bima Formation points to predominance of humid sub - tropical to tropical climatic conditions. This favors pedogenic activities which are manifested in the several occurrences of paleosols. Pronounced periods of arid climatic conditions are also notable from the subordinate smectite mineralization. Chlorite mineralization at some localities is indicative of elevation of the provenance area, and this is synonymous with deposition of the Bima Formation, because of its syn - depositional tectonics. The absences of lacustrine shales in the syn - rift stratigraphic architecture of the Bima Formation indicates that the lower Cretaceous petroleum system that are common in the West and Central African Rift basins are generally barren in the Gongola Sub - basin of the Northern Benue Trough.

Facies analysis and depositional environments of upper part of Richmond group (upper Ordovician), Richmond, Indiana, to Xenia, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Betz, C.E.; Martin, W.D.

Rock sections of the Drakes, Elkhorn, and Whitewater Formations were studied along an east-west-trending line in order to distinguish facies changes in a slope direction across the paleodepositional basin. The Richmond limestones, shales, and dolostones formed from fine-grained, terrigenous and carbonate sediments deposited on a shallow marine ramp within the humid, tropical, low latitudes of the Southern Hemisphere. Depositional environments on the ramp are represented by five main facies type. The five Richmond facies form a subtidal to supratidal shallowing-upward sequence. This progressive shallowing during the Late Ordovician resulted from the westward regional progradation of Queenston deltaic facies.

Neogene stratigraphy and Andean geodynamics of southern Ecuador

NASA Astrophysics Data System (ADS)

Hungerbühler, Dominik; Steinmann, Michael; Winkler, Wilfried; Seward, Diane; Egüez, Arturo; Peterson, Dawn E.; Helg, Urs; Hammer, Cliff

2002-01-01

The present paper reviews Tertiary volcanic and sedimentary formations in the Inter-Andean region of southern Ecuador (between 2°S and 4°20'S) in order to develop a geodynamic model of the region. The formations occur in the southern shallow prolongation of the Inter-Andean Valley between the Cordillera Real to the east, and the Cordillera Occidental and Amotape-Tahuín Provinces to the west. One hundred fifty zircon fission-track analyses has established a detailed chronostratigraphy for the sedimentary and volcanic formations and several small intrusions. The Paleogene to early Miocene formations are dominated by intermediate and acidic volcanic and pyroclastic rocks. In addition, relics of Eocene continental sedimentary series have been identified. The Neogene sedimentary series lie unconformably on deformed and eroded metamorphic, sedimentary and volcanic formations. They were deposited in two stages, which are separated by a major unconformity dated at ≈10-9 Ma. (1) During the middle and early late Miocene (≈15-10 Ma) marginal marine deltaic, lagoonal, lacustrine and fluvial environments prevailed, which we group under the heading "Pacific Coastal sequences". They presumably covered a greater surface area in southern Ecuador than their present occurrence in small topographic depressions. We suggest that they were deposited in the shallow marine Cuenca and Loja Embayments. Deposition in a marginal marine environment is also supported by the occurrence of brackish water ostracods and other fauna. (2) Above the regional (angular) unconformity, the coastal facies are overlain by late Miocene (≈9-5 Ma) continental alluvial fan and fluvial facies which are in turn covered by mainly airborne volcanic material. They represent the "Intermontane sequences" of the basins of Cuenca, Girón-Santa Isabel, Nabón, Loja and Malacatos-Vilcabamba. Sedimentologic and stratigraphic results are used to discuss the tectonic setting of Neogene sedimentation in the forearc and arc domain of the Ecuadorian subduction system. During the Pacific Coastal stage, northward displacement of the coastal forearc block along the Calacali-Pallatanga fault zone has driven crustal collapse in the Inter-Andean region. As a result, extensional subsidence drove the eastward ingression of shallow seas into the Cuenca and Loja Embayments from the Manabí and Progreso Basins to the west. Tectonic inversion in the forearc area during the early late Miocene (at ≈9.5 Ma) reflects the initiation of W-E oriented compression and uplift in the Inter-Andean region and the establishment of smaller Intermontane stage basins, which host the continental sequences. Coeval topographic rise of the Cordillera Occidental is indicated by the onset of clastic input from the west. The small Intermontane Basin of Nabón (≈8.5-7.9 Ma) formed during the period of maximum compression. The present data prove that the Neogene Andean forearc and arc area in southern Ecuador was a site of important but variable tectonic activity, which was presumably driven by the collision and coupling of the Carnegie Ridge with the Ecuadorian margin since ≈15-9 Ma.

Soft-sediment deformations (convolute lamination and load structures) in turbidites as indicators of flow reflections against bounding slopes

NASA Astrophysics Data System (ADS)

Tinterri, Roberto; Muzzi Magalhaes, Pierre; Tagliaferri, Alessio; Cunha, Rogerio S.; Laporta, Michele

2015-04-01

Soft-sediment deformations, such as convolute laminations, load structures and water escapes are very rapid deformations that occur in unconsolidated sediments near the depositional surface during or shortly after deposition and before significant diagenesis. These types of deformations develop when primary stratifications are deformed by a system of driving forces, while the sediment is temporarily in a weakened state due to the action of a deformation mechanism know as liquidization. This deformation occurs if the applied stress exceeds the sediment strength, either through an increase in the applied stress or through a temporary reduction in sediment strength. Liquidization mechanisms can be triggered by several agents, such as seismic shaking, rapid sedimentation with high-fallout rates or cyclic-pressure variations associated with storm waves or breaking waves. Consequently, soft-sediment deformations can be produced by different processes and form ubiquitous sedimentary structures characterizing many sedimentary environments. However, even though these types of structures are relatively well-known in terms of geometry and sedimentary characteristics, many doubts arise when the understanding of deformation and trigger mechanisms is attempted. As stressed also by the recent literature, the main problem lies in the fact that the existing approaches for the identification of triggering agents rely on criteria that are not diagnostic or not applicable to outcrop-based studies, because they are not always based on detailed facies analysis related to a paleoenvironmental-context approach. For this reason, this work discusses the significance of particular types of soft-sediment deformations that are very common in turbidite deposits, namely convolute laminations and load structures, especially on the basis of a deep knowledge of the stratigraphic framework and geological setting in which these structures are inserted. More precisely, detailed facies analyses of the turbidites containing these deformative structures show that they are genetically linked to contained-reflected beds in structurally-confined basins, suggesting a trigger mechanism associated with the cyclic-wave loading produced by flow impacts or reflected bores and internal waves related to ponded turbidity currents. The data that can demonstrate this hypothesis come from the foredeep turbidites of the Marnoso-arenacea Formation (northern Italy) and Annot Sandstones (southwestern France), where a basin scale high-resolution stratigraphic framework with bed-by-bed correlations is now available. These data show that the lateral and vertical distribution of convolute laminae and load structures is not random but has an evident depositional logic related to reflection processes against bounding slopes. Therefore, the main objectives of this work are: 1) to show that convolute laminae and load structures are strictly associated with other sedimentary structures that are unequivocally related to reflection and rebound processes of turbidity currents against morphological obstacles; 2) to show that their lateral and vertical distribution increases concomitantly with the number of contained-reflected beds in the proximity of structurally-controlled morphological highs; 3) to show that the increase in contained-reflected beds with convolute laminae is strictly related to the increase in the synsedimentary-structural uplifts producing more pronounced morphologic highs; 4) to discuss the processes that link soft-sediment deformations with cyclic-wave loading related to internal waves and bores produced by reflection processes.

Metamorphism and plutonism around the middle and south forks of the Feather River, California

USGS Publications Warehouse

Hietanen, Anna Martta

1976-01-01

The area around the Middle and South Forks of the Feather River provides information on metamorphic and igneous processes that bear on the origin of andesitic and granitic magmas in general and on the variation of their potassium content in particular. In the north, the area joins the Pulga and Bucks Lake quadrangles studied previously. Tectonically, this area is situated in the southern part of an arcuate segment of the Nevadan orogenic belt in the northwestern Sierra Nevada. The oldest rocks are metamorphosed calcalkaline island-arc-type andesite, dacite, and sodarhyolite with interbedded tuff layers (the Franklin Canyon Formation), all probably correlative with Devonian rocks in the Klamath Mountains. Younger rocks form a sequence of volcanic, volcaniclastic, and sedimentary rocks including some limestone (The Horseshoe Bend Formation), probably Permian in age. All the volcanic and sedimentary rocks were folded and recrystallized to the greenschist facies during the Nevadan (Jurassic) orogeny and were invaded by monzotonalitic magmas shortly thereafter. A second lineation and metamorphism to the epidote-amphibolite facies developed in a narrow zone around the plutons. In light of the concept of plate tectonics, it is suggested that the early (Devonian?) island-arc-type andesite, dacite, and sodarhyolite (the Franklin Canyon Formation) were derived from the mantle above a Benioff zone by partial melting of peridotite in hydrous conditions. The water was probably derived from an oceanic plate descending to the mantle. Later (Permian?) magmas were mainly basaltic; some discontinuous layers of potassium-rich rhyolite indicate a change into anhydrous conditions and a deeper level of magma generation. The plutonic magmas that invaded the metamorphic rocks at the end of the Jurassic may contain material from the mantle, the subducted oceanic lithosphere, and the downfolded metamorphic rocks. The ratio of partial melts from these three sources may have changed with time, giving rise to the diversity in composition of magmas.

Late Glacial and Holocene gravity deposits in the Gulf of Lions deep basin, Western Mediterranean

NASA Astrophysics Data System (ADS)

Dennielou, B.; Bonnel, C.; Sultan, N.; Voisset, M.; Berné, S.; Beaudouin, C.; Guichard, F.; Melki, T.; Méar, Y.; Droz, L.

2003-04-01

Recent investigations in the Gulf of Lions have shown that complex gravity processes and deposits occurred in the deep basin since the last Glacial period. Besides the largest western Mediterranean turbiditic system, Petit-Rhône deep-sea fan (PRDSF), whose built-up started at the end of Pliocene, several sedimentary bodies can be distinguished: (1) The turbiditic Pyreneo-Languedocian ridge (PLR), at the outlet of the Sète canyon network, whose activity is strongly connected to the sea level and the connection of the canyons with the rivers. It surface shows long wave-length sediment waves, probably in relation with the turbiditic overspill. (2) An acoustically chaotic unit, filling the topographic low between the PRDSF and the PLR, the Lower Interlobe Unit. Possible source areas are the Sète canyon and/or the Marti Canyon. (3) An acoustically transparent unit, below the neofan, filling the same topographic low, the Western Transparent Unit, interpreted as a debris-flow. Recent sediment cores have shown that this sedimentary is composed of folded, laminated mud, both in its northern and southern fringes. (4) The Petit-Rhône neofan, a channelized turbiditic lobe resulting from the last avulsion of the Petit-Rhône turbiditic channel and composed of two units. The lower, acoustically chaotic facies unit, corresponding to an initial stage of the avulsion, similar to the HARP facies found on the Amazon fan. The upper, transparent, slightly bedded, channel-levee shaped unit, corresponding to the channelized stage of the avulsion. (5) Up to ten, Deglacial to Holocene, thin, fine sand layers, probably originating from shelf-break sand accumulations, through the Sète canyon network. (6) Giant scours, in the southern, distal part of the neofan, possibly linked to turbiditic overflow from the neo-channel, probably corresponding to channel-lobe transition zone features (Wynn et al. 2002). Recent investigations have shown no evidence of bottom current features.

Drowned carbonate platforms in the Huon Gulf, Papua New Guinea

NASA Astrophysics Data System (ADS)

Webster, Jody M.; Wallace, Laura; Silver, Eli; Applegate, Bruce; Potts, Donald; Braga, Juan Carlos; Riker-Coleman, Kristin; Gallup, Christina

2004-11-01

The western Huon Gulf, Papua New Guinea, is an actively subsiding foreland basin dominated by drowned carbonate platforms. We investigated these platforms using new high-resolution multibeam, side-scan sonar and seismic data, combined with submersible observations and previously published radiometric and sedimentary facies data. The data reveal 14 distinct drowned carbonate platforms and numerous pinnacles/banks that increase in age (˜20-450 kyr) and depth (0.1-2.5 km) NE toward the Ramu-Markham Trench. Superimposed on this overall downward flexing of the platforms toward the trench is a systematic tilting of the deep platforms 15 m/km toward the NW and the shallow platforms 2 m/km toward the SE. This may reflect the encroaching thrust load from the NW (Finisterre Range) and spatial variations in the flexural rigidity of the underlying basement. The drowned platforms form a complex system of promontories and reentrants, with abundant pinnacles and banks preserved at similar depths seaward of the main platforms. This configuration closely mimics the present-day Huon coastline and its seaward islands fringed by modern coral reefs. The platforms retain structural, morphologic, and sedimentary facies evidence of primary platform growth, drowning, and subsequent backstepping, despite some lateral erosion of the platform margins (<100 m slope defacement) by mass wasting. Both platforms and pinnacles are composite features containing multiple terrace levels and notches, corresponding to multiple phases of growth, emergence, and drowning in response to rapid climatic and sea level changes during the evolution of each structure. On the basis of all observational and numerical modeling data, we propose a chronology for the initiation, growth, and drowning of the 14 platforms. Over shorter timescales (≤100 kyr) the rate and amplitude of eustatic sea level changes are critical in controlling initiation, growth, drowning or subaerial exposure, subsequent reinitiation, and final drowning of the platforms. However, continued tectonic subsidence and basement substrate morphology influence the overall backstepping geometry and subsequent tilting of the platforms over longer timescales (≥100-500 kyr).

Mesozoic architecture of a tract of the European-Iberian continental margin: Insights from preserved submarine palaeotopography in the Longobucco Basin (Calabria, Southern Italy)

NASA Astrophysics Data System (ADS)

Santantonio, Massimo; Fabbi, Simone; Aldega, Luca

2016-01-01

The sedimentary successions exposed in northeast Calabria document the Jurassic-Early Cretaceous tectonic-sedimentary evolution of a former segment of the European-Iberian continental margin. They are juxtaposed today to units representing the deformation of the African and Adriatic plates margins as a product of Apenninic crustal shortening. A complex pattern of unconformities reveals a multi-stage tectonic evolution during the Early Jurassic, which affected the facies and geometries of siliciclastic and carbonate successions deposited in syn- and post-rift environments ranging from fluvial to deep marine. Late Sinemurian/Early Pliensbachian normal faulting resulted in exposure of the Hercynian basement at the sea-floor, which was onlapped by marine basin-fill units. Shallow-water carbonate aprons and reefs developed in response to the production of new accommodation space, fringing the newborn islands which represent structural highs made of Paleozoic crystalline and metamorphic rock. Their drowning and fragmentation in the Toarcian led to the development of thin caps of Rosso Ammonitico facies. Coeval to these deposits, a thick (> 1 km) hemipelagic/siliciclastic succession was sedimented in neighboring hanging wall basins, which would ultimately merge with the structural high successions. Footwall blocks of the Early Jurassic rift, made of Paleozoic basement and basin-margin border faults with their onlapping basin-fill formations, are found today at the hanging wall of Miocene thrusts, overlying younger (Middle/Late Jurassic to Late Paleogene) folded basinal sediments. This paper makes use of selected case examples to describe the richly diverse set of features, ranging from paleontology to sedimentology, to structural geology, which are associated with the field identification of basin-margin unconformities. Our data provide key constraints for restoring the pre-orogenic architecture of a continental margin facing a branch of the Liguria-Piedmont ocean in the Western Tethys, and for estimating displacements and slip rates along synsedimentary faults.

The Lower Triassic sedimentary and carbon isotope records from Tulong (South Tibet) and their significance for Tethyan palaeoceanography

NASA Astrophysics Data System (ADS)

Brühwiler, Thomas; Goudemand, Nicolas; Galfetti, Thomas; Bucher, Hugo; Baud, Aymon; Ware, David; Hermann, Elke; Hochuli, Peter A.; Martini, Rossanna

2009-12-01

The Lower Triassic sedimentary and carbonate/organic carbon isotope records from the Tulong area (South Tibet) are documented in their integrality for the first time. New age control is provided by ammonoid and conodont biostratigraphy. The basal Triassic series consists of Griesbachian dolomitic limestones, similar to the Kathwai Member in the Salt Range (Pakistan) and to the Otoceras Beds in Spiti (India). The overlying thin-bedded limestones of Dienerian age strongly resemble the Lower Ceratite Limestone of the Salt Range. They are followed by a thick series of dark green, silty shales of Dienerian-early Smithian age without fauna that strikingly resemble the Ceratite Marls of the Salt Range. This interval is overlain by thin-bedded, light grey fossil-rich limestones of middle to late Smithian age, resembling the Upper Ceratite Limestone of the Salt Range. These are followed by a shale interval of early Spathian age that has no direct counterpart in other Tethyan sections. Carbonate production resumes during the late early and middle Spathian with the deposition of red, bioclastic nodular limestone ("Ammonitico Rosso" type facies). Apart from its colour this facies is similar to the one of the Niti Limestone in Spiti and of the Spathian nodular limestone in Guangxi (South China). As in other Tethyan localities such as Spiti, the early-middle Anisian part of the Tulong section is strongly condensed and is characterized by grey, thin-bedded limestones with phosphatized ammonoids. As for many other Tethyan localities the carbon isotope record from Tulong is characterized by a late Griesbachian-Dienerian positive δ13C carb excursion (2‰), and a very prominent positive excursion (5‰) at the Smithian-Spathian boundary, thus confirming the well-documented perturbations of the global carbon cycle following the Permian-Triassic mass extinction event.

Sedimentology and Sedimentary Dynamics of the Desmoinesian Cherokee Group, Deep Anadarko Basin, Texas Panhandle

NASA Astrophysics Data System (ADS)

Hu, N.; Loucks, R.; Frebourg, G.

2015-12-01

Understanding the spatial variability of deep-water facies is critical to deep-water research because of its revealing information about the relationship between desity flow processes and their resultant sedimentary sequences. The Cherokee Group in the Anadarko Basin, northeastern Texas Panhandle, provides an opportunity to investigate an icehouse-greenhouse Pennsylvanian hybrid system that well demonstrates the intricacies of vertical and lateral facies relationships in an unconfined fan-delta fed deep-water slope to basinal setting. The stratigraphic section ranges in thickness from 150 to 460 m. The cyclic sedimentation and foreland basin tectonics resulted in a complex stratal architecture that was sourced by multiple areas of sediment input. This investigation consists of wireline-log and core data. Five-thousand wireline logs were correlated in an area of over 9500 sq km to map out six depositional sequences that are separated by major flooding events. These events are correlative over the whole area of study. Six cores, that sample nearly the complete section, were described for lithofacies. Lithofacies are recognized based on depositional features and mineralogy:(1) Subarkose, (2) Lithicarkoses, (3) Sandy siliciclastic conglomerate, (4) Muddy calcareous conglomerate, (5) Crinoidal packstone, (6) Oodic grainstone, (7)Pelodic grainstone, (8) Ripple laminated mudrock, (9) faint laminated mudrock. The integration of isopachs of depositional sequences with the lithofacies has allowed the delineation of the spatial and temporal evolution of the slope to basin-floor system. Thin-to-thick bedded turbidites, hyperconcentrated density flow deposits (slurry beds), and debris and mud flow deposits were observed and can be used to better predicte lithofacies distributions in areas that have less data control. These mixed siliciclastic and carbonate deposits can be carrier beds for the hydrocarbons generated from the enclosing organic-rich (TOC ranges from 0.55 to 6.77wt%), dysareobic to anaerobic mudstones.

Sled-Mounted Geophone Arrays for Near-Surface (0-4m) Seismic Profiling in Highly-attenuating Sedimentary Facies: Atchafalaya Basin Indian Bayou, Louisiana

NASA Astrophysics Data System (ADS)

Lorenzo, J. M.; Saanumi, A. A.; Westbrook, C. C.; Egnew, S. F.; Bentley, S. J.

2004-12-01

Towed land-geophone seismic arrays have the potential to increase markedly the efficiency for collecting near-surface (0-100m) high-resolution seismic data, but viable cases are few and have been limited to a narrow range of near-surface sedimentary facies. During November 2003 through June 2004 we conducted extensive seismic tests with traditional geophones mounted on low-cost Π -shaped sleds. We targeted human habitation surfaces within the upper few meters of a crevasse splay complex in the Atchafalaya Basin study area, Indian Bayou Wildlife Management Area, Louisiana, U.S. For seismic-to-core correlation, sealed, continuous test cores were run through a multi-sensor to test for magnetic susceptibility, bulk sediment density and electrical resistivity. We compared 24-channel seismic data using a variety of seismic source-receiver combinations. Sources comprised a 12-gauge pipe-gun, a 0.22 caliber-powered piston gun, an accelerated weight drop, and a small claw hammer. Commercial blanks, 2g-black-powder, and primer-only shells were fired by the pipe gun. Receivers included 100-Hz vertical-, and 14-Hz-horizontal-component geophones. For comparison, both ground-planted and geophones mounted on wooden and iron sleds 0.3 and 1.2m long respectively. Geophones mounted on steel sleds produced data of adequate quality. Whereas traditional ground-planted geophones showed better data quality, time and cost efficiency make mounted phones more feasible for regional studies as traditional arrays are prohibitively expensive. Because of the high seismic attenuation, only horizontal-component geophones mounted on heavy (9-kg) steel sleds provided useful data, although the shallowest reflection observed in the shear wave data came from a boundary at ~ 19m depth, too far below the target depth of 4-5 m. Instead, we forward-modeled refraction traveltime data to derive the acoustic and SH velocity structure.

Contemporaneous migmitization and granite emplacement during regional metamorphism: Evidence for mid-crustal contribution to the batholiths of the Arabian-Nubian Shield

NASA Astrophysics Data System (ADS)

Elisha, B.; Katzir, Y.; Kylander-Clark, A. R.

2017-12-01

Collision-related granitoid batholiths, like those of the Hercynian and Himalayan orogens, are mostly fed by magma derived from meta-sedimentary sources. However, in the late Neoproterozoic calc-alkaline batholiths of the Arabian Nubian Shield (ANS), which constitutes the northern half of the East African orogen, sedimentary contribution is obscured by the juvenile character of the crust and the scarcity of migmatites. Here we use paired in-situ measurements of U-Th-Pb isotope ratios and REE contents of monazite and xenotime by LASS to demonstrate direct linkage between granites and migmatites in the northernmost ANS. Our results indicate a single prolonged period of monazite growth, 640-600 Ma, in metapelites, migmatites and peraluminous granites of the Abu-Barqa (SW Jordan), Roded (S Israel) and Taba-Nuweiba (Sinai, Egypt) metamorphic suites. Distribution of monazite dates and age zoning in single monazite grains in migmatites suggest that peak thermal conditions and partial melting prevailed for 10 Myr, from 620 to 610 Ma. REE patterns of monazite are well correlated with age, recording garnet growth and garnet breakdown in association with the prograde and retrograde stages of the melting reactions, respectively. Xenotime dates (n=40) cluster at 600-580 Ma recording retrogression to greenschist-facies conditions as garnet continues to destabilize. Phase equilibrium modelling and mineral thermobarometry illustrate that melting occurred either by dehydration of muscovite or by water-fluxed melting at 650-680° and 5-7 kbar. The expected melt production is 8-14%, allowing melt connectivity network to form and eventually melt extraction and segregation. The crystallization time of peritectic melt retained in dia- and metataxites overlaps the emplacement time of a vast calc-alkaline granitic flux throughout the northern ANS, which was previously considered post-collisional. Similar monazite ages ( 620 Ma) of the amphilolite-facies non-anatectic Elat schist indicate that migmatites are the result of widespread regional, rather than local contact metamorphism, representing the climax of East African orogenesis.

Structure, metamorphism, and geochronology of the Cosmos Hills and Ruby Ridge, Brooks Range schist belt, Alaska

USGS Publications Warehouse

Christiansen, Peter B.; Snee, Lawrence W.

1994-01-01

The boundary of the internal zones of the Brooks Range orogenic belt (the schist belt) is a fault contact that dips toward the hinterland (the Yukon-Koyukuk province). This fault, here referred to as the Cosmos Hills fault zone, juxtaposes oceanic rocks and unmetamorphosed sedimentary rocks structurally above blueschist-to-greenschist facies metamorphic rocks of the schist belt. Near the fault contact, schist belt rocks are increasingly affected by a prominent, subhorizontal transposition foliation that is locally mylonitic in the fault zone. Structural and petrologic observations combined with 40Ar/39Ar incremental-release geochronology give evidence for a polyphase metamorphic and deformational history beginning in the Middle Jurassic and continuing until the Late Cretaceous. Our 40Ar/39Ar cooling age for Jurassic metamorphism is consistent with stratigraphic and other evidence for the onset of Brooks Range orogenesis. Jurassic metamorphism is nearly everywhere overprinted by a regional greenschist-facies event dated at 130–125 Ma. Near the contact with the Cosmos Hills fault zone, the schist belt is increasingly affected by a younger greenschist metamorphism that is texturally related to a prominent foliation that folds and transposes an older fabric. The 40Ar/39Ar results on phengite and fuchsite that define this younger fabric give recrystallization ages ranging from 103 to less than 90 Ma. We conclude that metamorphism that formed the transposition fabric peaked around 100 Ma and may have continued until well after 90 Ma. This age for greenschist metamorphism is broadly synchronous with the depositional age of locally derived, shallow-marine clastic sedimentary strata in the hanging wall of the fault zone and thus substantiates the interpretation that the fault zone accommodated extension in the Late Cretaceous. This extension unroofed and exhumed the schist belt during relative subsidence of the Yukon-Koyukuk province.

Facies Analysis of the Tandoǧdu Travertines, Van, Eastern Anatolia, Turkey: implications for the active tectonic deformation behind the formation and evolution of the travertines

NASA Astrophysics Data System (ADS)

Yesilova, Cetin; Yesilova, Pelin; Aclan, Mustafa; Gülyüz, Nilay

2017-04-01

In this study, stratigraphic and sedimentologic characteristics of Tandoǧdu travertines exposing at the 13 km southwest of Başkale, Van were examined. In this respect, we shed light on their formation conditions and depositional environment by determining their morphological characteristics and analyzing their facies distribution. In addition, kinematic studies were conducted by collecting structural data from the structures hosting the travertines. Tandoǧdu travertines having bed type and ridge type travertines have 5 distinct lithofacies based on the studies conducted. These are: (1) crystalline crust facies, (2) coated bubble facies, (3) paper-thin raft type facies, (4) lithoclast - breccia facies and (5) paleosoil facies. According to the examination of their morphologies and lithofacies; lithofacies were developed depending on the temperature of fluids forming the travertines. Distal from the source field of the hydrothermal fluids, paper-thin raft type facies were developed in shallow pools. Proximal to the source field of the hydrothermal fluids, crystalline crust facies and coated bubble facies were deposited. Existence of breccia facies indicates the effects of active tectonism during the formation of travertines. Hot hydrothermal pools on the ridge type travertines prove the still active tectonic activities. On-going studies aim to date growth of the travertines by U-Th dating method which will also shed some light on the tectonic scenario behind the evolution of the travertines.

Unsupervised seismic facies analysis with spatial constraints using regularized fuzzy c-means

NASA Astrophysics Data System (ADS)

Song, Chengyun; Liu, Zhining; Cai, Hanpeng; Wang, Yaojun; Li, Xingming; Hu, Guangmin

2017-12-01

Seismic facies analysis techniques combine classification algorithms and seismic attributes to generate a map that describes main reservoir heterogeneities. However, most of the current classification algorithms only view the seismic attributes as isolated data regardless of their spatial locations, and the resulting map is generally sensitive to noise. In this paper, a regularized fuzzy c-means (RegFCM) algorithm is used for unsupervised seismic facies analysis. Due to the regularized term of the RegFCM algorithm, the data whose adjacent locations belong to same classification will play a more important role in the iterative process than other data. Therefore, this method can reduce the effect of seismic data noise presented in discontinuous regions. The synthetic data with different signal/noise values are used to demonstrate the noise tolerance ability of the RegFCM algorithm. Meanwhile, the fuzzy factor, the neighbour window size and the regularized weight are tested using various values, to provide a reference of how to set these parameters. The new approach is also applied to a real seismic data set from the F3 block of the Netherlands. The results show improved spatial continuity, with clear facies boundaries and channel morphology, which reveals that the method is an effective seismic facies analysis tool.

Seismic facies analysis based on self-organizing map and empirical mode decomposition

NASA Astrophysics Data System (ADS)

Du, Hao-kun; Cao, Jun-xing; Xue, Ya-juan; Wang, Xing-jian

2015-01-01

Seismic facies analysis plays an important role in seismic interpretation and reservoir model building by offering an effective way to identify the changes in geofacies inter wells. The selections of input seismic attributes and their time window have an obvious effect on the validity of classification and require iterative experimentation and prior knowledge. In general, it is sensitive to noise when waveform serves as the input data to cluster analysis, especially with a narrow window. To conquer this limitation, the Empirical Mode Decomposition (EMD) method is introduced into waveform classification based on SOM. We first de-noise the seismic data using EMD and then cluster the data using 1D grid SOM. The main advantages of this method are resolution enhancement and noise reduction. 3D seismic data from the western Sichuan basin, China, are collected for validation. The application results show that seismic facies analysis can be improved and better help the interpretation. The powerful tolerance for noise makes the proposed method to be a better seismic facies analysis tool than classical 1D grid SOM method, especially for waveform cluster with a narrow window.

Early metal pollution in southwestern Europe: the former littoral lagoon of El Almarjal (Cartagena mining district, S.E. Spain).A sedimentary archive more than 8000 years old.

PubMed

Manteca, José-Ignacio; Ros-Sala, Milagros; Ramallo-Asensio, Sebastián; Navarro-Hervás, Francisca; Rodríguez-Estrella, Tomás; Cerezo-Andreo, Felipe; Ortiz-Menéndez, José-Eugenio; de-Torres, Trinidad; Martínez-Andreu, Miguel

2017-04-01

A borehole drilling campaign has allowed the study of a former littoral lagoon located next to the harbour city of Cartagena in South-East Spain (close to the Sierra de Cartagena polymetallic ore deposits). This lagoon, which developed during the Holocene, was first a shallow sedimentary marine environment and later evolved into a swampy semi-endorheic basin named "Almarjal" (after the Arab term from the fourteenth century). The lagoon eventually dried out and at present forms part of the substratum of the modern sector of the city urban area. The basin representative sediments are sapropelic black silty facies forming a continuous sedimentary archive, accounting for more than 8000 years of depositional phenomena. The geochemical study of these sediments, together with their absolute calibrated dating by 14 C, allows definition of successive stages of mining and metallurgical activities in the area. In turn, this information provides a more comprehensive perspective regarding metal pollution, particularly lead contamination during different periods of the Recent Prehistory and the Classical Age. The results indicate that the beginning of contamination by lead and other heavy metals occurred as early as 4500 years ago, when the Final Chalcolithic period was taking place in the South-East of the Iberian Peninsula. This finding provides further insights regarding the debate on the origins of lead mining and metallurgy in SE Spain.

Subsidence history and tectonic evolution of Campos basin, offshore Brazil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohriak, W.U.; Karner, G.D.; Dewey, J.F.

1987-05-01

The tectonic component of subsidence in the Campos basin reflects different stages of crustal reequilibration subsequent to the stretching that preceded the breakup of Pangea. Concomitant with rifting in the South Atlantic, Neocomian lacustrine rocks, with associated widespread mafic volcanism, were deposited on a vary rapidly subsiding crust. The proto-oceanic stage (Aptian) is marked by a sequence of evaporitic rocks whose originally greater sedimentary thickness is indicated by residual evaporitic layers with abundant salt flow features. An open marine environment begins with thick Albian/Cenomanian limestones that grade upward and basinward into shales. This section, with halokinetic features and listric detachedmore » faulting sloping out on salt, is characterized by an increased sedimentation rate. The marine Upper Cretaceous to Recent clastic section, associated with the more quiescent phase of thermal subsidence, is characterized by drastic changes in sedimentation rate. Stratigraphic modeling of the sedimentary facies suggests a flexurally controlled loading mechanism (regional compensation) with a temporally and spatially variable rigidity. Locally, the subsidence in the rift-phase fault-bounded blocks shows no correspondence with the overall thermal subsidence, implying that the crust was not effectively thinned by simple, vertically balanced stretching. Deep reflection seismic sections show a general correspondence between sedimentary isopachs and Moho topography, which broadly compensates for the observed subsidence. However, even the Moho is locally affected by crustal-scale master faults that apparently are also controlling the movement mechanisms during the rift-phase faulting.« less

The Devonian Marcellus Shale and Millboro Shale

USGS Publications Warehouse

Soeder, Daniel J.; Enomoto, Catherine B.; Chermak, John A.

2014-01-01

The recent development of unconventional oil and natural gas resources in the United States builds upon many decades of research, which included resource assessment and the development of well completion and extraction technology. The Eastern Gas Shales Project, funded by the U.S. Department of Energy in the 1980s, investigated the gas potential of organic-rich, Devonian black shales in the Appalachian, Michigan, and Illinois basins. One of these eastern shales is the Middle Devonian Marcellus Shale, which has been extensively developed for natural gas and natural gas liquids since 2007. The Marcellus is one of the basal units in a thick Devonian shale sedimentary sequence in the Appalachian basin. The Marcellus rests on the Onondaga Limestone throughout most of the basin, or on the time-equivalent Needmore Shale in the southeastern parts of the basin. Another basal unit, the Huntersville Chert, underlies the Marcellus in the southern part of the basin. The Devonian section is compressed to the south, and the Marcellus Shale, along with several overlying units, grades into the age-equivalent Millboro Shale in Virginia. The Marcellus-Millboro interval is far from a uniform slab of black rock. This field trip will examine a number of natural and engineered exposures in the vicinity of the West Virginia–Virginia state line, where participants will have the opportunity to view a variety of sedimentary facies within the shale itself, sedimentary structures, tectonic structures, fossils, overlying and underlying formations, volcaniclastic ash beds, and to view a basaltic intrusion.

Geodynamic evolution and sedimentary infill of the northern Levant Basin: A source to sink-perspective

NASA Astrophysics Data System (ADS)

Hawie, N.

2013-12-01

Nicolas Hawie a,b,c (nicolas.hawie@upmc.fr) Didier Granjeon c (didier.granjeon@ifpen.fr) Christian Gorini a,b (christian.gorini@upmc.fr) Remy Deschamps c (remy.deschamps@ifpen.fr) Fadi H. Nader c (fadi-henri.nader@ifpen.fr) Carla Müller Delphine Desmares f (delphine.desmares@upmc.fr) Lucien Montadert e (lucien.montadert@beicip.com) François Baudin a (francois.baudin@upmc.fr) a UMR 7193 Institut des Sciences de la Terre de Paris, Université Pierre et Marie Curie/ Univ. Paris 06, case 117. 4, place Jussieu 75252 Paris Cedex 05, France b iSTEP, UMR 7193, CNRS, F-75005, Paris, France c IFP Energies nouvelles, 1-4 avenue du Bois Préau 92852 Rueil Malmaison Cedex, France d UMR 7207, Centre de Recherche sur la Paleobiodiversité et les Paleoenvironnements. Université Pierre et Marie Curie, Tour 46-56 5ème. 4, place Jussieu 75252 Paris Cedex 05, France e Beicip Franlab, 232 Av. Napoléon Bonaparte, 95502 Rueil-Malmaison, France Sedimentological and biostratigraphic investigations onshore Lebanon coupled with 2D offshore reflection seismic data allowed proposing a new Mesozoic-Present tectono-stratigraphic framework for the northern Levant Margin and Basin. The seismic interpretation supported by in-depth facies analysis permitted to depict the potential depositional environments offshore Lebanon as no well has yet been drilled. The Levant region has been affected by successive geodynamic events that modified the architecture of its margin and basin from a Late Triassic to Middle Jurassic rift into a Late Cretaceous subduction followed by collision and Miocene-Present strike slip motion. The interplay between major geodynamic events as well as sea level fluctuations impacted on the sedimentary infill of the basin. During Jurassic and Cretaceous, the Levant Margin is dominated by the aggradation of a carbonate platform while deepwater mixed-systems prevailed in the basin. During the Oligo-Miocene, three major sedimentary pathways are expected to drive important quantities of clastic material into the Levant Basin: (1) the marginal canyons along the Levant Margin, (2) the Latakia region and the Palmyrides Basin (Syria) and (3) the Red Sea area and Nile Delta. Regional drainage system analysis was performed to estimate the contribution to the infill of the basin of the different sediment sources, and in particular, to estimate erosion of Nubian siliciclastic material, granitic Red Sea rift shoulders and Arabian Shield. A numerical stratigraphic forward model, Dionisos, was used to test these source-to-sink assumptions; a sensitivity analysis was then performed to understand better the impact of the different geodynamic and stratigraphic scenarios on the architecture and sedimentary infill of the Levant Basin, and thus on the expected petroleum systems of this frontier basin

In search of early life: Carbonate veins in Archean metamorphic rocks as potential hosts of biomarkers

NASA Astrophysics Data System (ADS)

Peters, Carl A.; Piazolo, Sandra; Webb, Gregory E.; Dutkiewicz, Adriana; George, Simon C.

2016-11-01

The detection of early life signatures using hydrocarbon biomarkers in Precambrian rocks struggles with contamination issues, unspecific biomarkers and the lack of suitable sedimentary rocks due to extensive thermal overprints. Importantly, host rocks must not have been exposed to temperatures above 250 °C as at these temperatures biomarkers are destroyed. Here we show that Archean sedimentary rocks from the Jeerinah Formation (2.63 billion yrs) and Carawine Dolomite (2.55 billion yrs) of the Pilbara Craton (Western Australia) drilled by the Agouron Institute in 2012, which previously were suggested to be suitable for biomarker studies, were metamorphosed to the greenschist facies. This is higher than previously reported. Both the mineral assemblages (carbonate, quartz, Fe-chlorite, muscovite, microcline, rutile, and pyrite with absence of illite) and chlorite geothermometry suggest that the rocks were exposed to temperatures higher than 300 °C and probably ∼400 °C, consistent with greenschist-facies metamorphism. This facies leads to the destruction of any biomarkers and explains why the extraction of hydrocarbon biomarkers from pristine drill cores has not been successful. However, we show that the rocks are cut by younger formation-specific carbonate veins containing primary oil-bearing fluid inclusions and solid bitumens. Type 1 veins in the Carawine Dolomite consist of dolomite, quartz and solid bitumen, whereas type 2 veins in the Jeerinah Formation consist of calcite. Within the veins fluid inclusion homogenisation temperatures and calcite twinning geothermometry indicate maximum temperatures of ∼200 °C for type 1 veins and ∼180 °C for type 2 veins. Type 1 veins have typical isotopic values for reprecipitated Archean sea-water carbonates, with δ13CVPDB ranging from - 3 ‰ to 0‰ and δ18OVPDB ranging from - 13 ‰ to - 7 ‰, while type 2 veins have isotopic values that are similar to hydrothermal carbonates, with δ13CVPDB ranging from - 18 ‰ to - 4 ‰ and δ18OVPDB ranging from - 18 ‰ to - 12 ‰. Evidently, the migration and entrapment of hydrocarbons occurred after peak metamorphism under temperatures congruous with late catagenesis and from fluids of different compositions. The relatively high temperatures of vein formation and the known geotectonic history of the rocks analysed suggest a probable minimum age of 1.8 billion yrs (Paleoproterozoic). Our results demonstrate that post peak-metamorphic veins provide an exciting opportunity in the search for evidence of early life. The integration of petrological and organic geochemical techniques is crucial for any future studies that use biomarkers to reconstruct the early biosphere.

Geologic map of the Vail West quadrangle, Eagle County, Colorado

USGS Publications Warehouse

Scott, Robert B.; Lidke, David J.; Grunwald, Daniel J.

2002-01-01

This new 1:24,000-scale geologic map of the Vail West 7.5' quadrangle, as part of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, provides new interpretations of the stratigraphy, structure, and geologic hazards in the area on the southwest flank of the Gore Range. Bedrock strata include Miocene tuffaceous sedimentary rocks, Mesozoic and upper Paleozoic sedimentary rocks, and undivided Early(?) Proterozoic metasedimentary and igneous rocks. Tuffaceous rocks are found in fault-tilted blocks. Only small outliers of the Dakota Sandstone, Morrison Formation, Entrada Sandstone, and Chinle Formation exist above the redbeds of the Permian-Pennsylvanian Maroon Formation and Pennsylvanian Minturn Formation, which were derived during erosion of the Ancestral Front Range east of the Gore fault zone. In the southwestern area of the map, the proximal Minturn facies change to distal Eagle Valley Formation and the Eagle Valley Evaporite basin facies. The Jacque Mountain Limestone Member, previously defined as the top of the Minturn Formation, cannot be traced to the facies change to the southwest. Abundant surficial deposits include Pinedale and Bull Lake Tills, periglacial deposits, earth-flow deposits, common diamicton deposits, common Quaternary landslide deposits, and an extensive, possibly late Pliocene landslide deposit. Landscaping has so extensively modified the land surface in the town of Vail that a modified land-surface unit was created to represent the surface unit. Laramide movement renewed activity along the Gore fault zone, producing a series of northwest-trending open anticlines and synclines in Paleozoic and Mesozoic strata, parallel to the trend of the fault zone. Tertiary down-to-the-northeast normal faults are evident and are parallel to similar faults in both the Gore Range and the Blue River valley to the northeast; presumably these are related to extensional deformation that occurred during formation of the northern end of the Rio Grande rift system in Colorado. In the southwestern part of the map area, a diapiric(?) exposure of the Eagle Valley Evaporite exists and chaotic faults and folds suggest extensive dissolution and collapse of overlying bedrock, indicating the presence of a geologic hazard. Quaternary landslides are common and indicate that landslide hazards are widespread in the area, particularly where old slide deposits are disturbed by construction. The late Pliocene(?) landslide that consists largely of a smectitic upper Morrison Formation matrix and boulders of Dakota Sandstone is readily reactivated. Debris flows are likely to invade low-standing areas within the towns of Vail and West Vail where tributaries of Gore Creek issue from the mountains on the north side of the valley.

Advanced seismic imaging of overdeepened alpine valleys

NASA Astrophysics Data System (ADS)

Burschil, Thomas; Buness, Hermann; Tanner, David; Gabriel, Gerald; Krawczyk, Charlotte M.

2017-04-01

Major European alpine valleys and basins are densely populated areas with infrastructure of international importance. To protect the environment by, e.g., geohazard assessment or groundwater estimation, understanding of the geological structure of these valleys is essential. The shape and deposits of a valley can clarify its genesis and allows a prediction of behaviour in future glaciations. The term "overdeepened" refers to valleys and basins, in which pressurized melt-water under the glacier erodes the valley below the fluvial level. Most overdeepened valleys or basins were thus refilled during the ice melt or remain in the form of lakes. The ICDP-project Drilling Overdeepened Alpine Valleys (DOVE) intends to correlate the sedimentary succession from boreholes between valleys in the entire alpine range. Hereby, seismic exploration is essential to predict the most promising well path and drilling site. In a first step, this DFG-funded project investigates the benefit of multi-component techniques for seismic imaging. At two test sites, the Tannwald Basin and the Lienz Basin, the Leibniz Institute for Applied Geophysics acquired P-wave reflection profiles to gain structural and facies information. Built on the P-wave information, several S-wave reflection profiles were acquired in the pure SH-wave domain as well as 6-C reflection profiles using a horizontal S-wave source in inline and crossline excitation and 3-C receivers. Five P-wave sections reveal the structure of the Tannwald Basin, which is a distal branch basin of the Rhine Glacier. Strong reflections mark the base of the basin, which has a maximum depth of 240 metres. Internal structures and facies vary strongly and spatially, but allow a seismic facies characterization. We distinguish lacustrine, glacio-fluvial, and deltaic deposits, which make up the fill of the Tannwald Basin. Elements of the SH-wave and 6-C seismic imaging correlate with major structures in the P-wave image, but vary in detail. Based on the interpretation, two possible drilling sites are suggested for DOVE that will also prove the seismic interpretation and explain differences in P- and S-wave imaging. First results for the intermountain Lienz Basin are available from four parallel P-wave sections which show the asymmetric basin shape. The sedimentary base is well imaged down to ca. 0.6 km depth, and internal reflectors point to a diverse fill. Here, S-wave imaging produces less distinct sections and requires more sophisticated processing. In summary, P-wave imaging is suitable to map overdeepened structures in the Alps while S-wave imaging can contribute additional information.

The Tunisian Jurassic aquifer in the North African Sahara aquifer system: information derived from two-dimensional seismic reflection and well logs

NASA Astrophysics Data System (ADS)

Ben Lasmar, Rafika; Guellala, Rihab; Garrach, Mohamed; Mahroug, Ali; Sarsar Naouali, Benen; Inoubli, Mohamed Hédi

2017-12-01

Southern Tunisia is an arid area where socio-economic activities are dependent on groundwater resources. The presented study aims to better characterize the Jurassic aquifer based on geological and geophysical data, with a view to develop a rational exploitation program. Well logs are used to precisely determine the position and composition of the known Jurassic aquifer layers and to identify others able to produce good quality water. The logs show that limestones, sandstones and dolomites of the Krachoua, Techout and Foum Tataouine formations are the main Jurassic aquifers. Sixty-eight seismic-reflection sections are integrated within this study. The interpolation between the interpreted sections leads to the construction of isochronous isopach maps and geoseismic sections, and their analysis finds that compressive and extensive tectonic deformations have influenced the Jurassic aquifer geometry. The Hercynian orogeny phase manifestation is remarkable in that there are several stratigraphic gaps in the Jurassic sequence. The E-W, NW-SE, and NNW-SSE accidents, reactivated in normal faults since the Permian to Lower Cretaceous epochs, have generated the structures found in the Jurassic series, such as subsided and raised blocks. Their syn-sedimentary activity has controlled the thickness and facies of these series. The Cretaceous, Tortonian and Post-Villafranchian compressions are responsible for the Jurassic-deposits folding in some localities. The highlighted tectonic and sedimentary events have an important impact on the Jurassic aquifer function by favoring the Jurassic aquifer interconnections and their connections with the Triassic and Cretaceous permeable series.

Continental-scale magmatic carbon dioxide seepage recorded by dawsonite in the Bowen-Gunnedah-Sydney basin system, eastern Australia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, J.C.; Bai, G.P.; Hamilton, P.J.

1995-07-03

Dawsonite, NaAlCO{sub 3}(OH){sub 2}, is widespread as a cement, replacement, and cavity filling in Permo-Triassic sedimentary rocks of the Bowen-Gunnedah-Sydney basin system eastern Australia. The origin of dawsonite in these rocks was studied by petrographic and stable isotope analysis. Dawsonite {delta}{sup 13}C (PDB) values range from {minus}4.0 to +4.1{per_thousand} and are remarkably consistent throughout the Bowen-Gunnedah-Sydney basin system. These values indicate either a marine carbonate or magmatic source for carbon in the dawsonite. A magmatic carbon source is considered more likely on the basis that (1) evidence of and the cause for widespread marine carbonate dissolution in the sedimentary successionsmore » are not apparent, (2) dawsonite is widespread in both marine and nonmarine facies, (3) the region has been the site of major igneous activity, (4) other dawsonite deposits of similar carbon isotopic composition are linked to igneous activity, and (5) magmatic CO{sub 2} accumulations are known in parts of the Bowen-Gunnedah-Sydney basin system. The timing of igneous activity in the Bowen Basin constrains the timing of dawsonite formation in the Bowen-Gunnedah-Sydney basin system to the Tertiary, consistent with textural relationships, which indicate that dawsonite formed late during the burial history of the Permo-triassic sequences. The distribution and interpreted origin of dawsonite implies magmatic CO{sub 2} seepage in the Bowen-Gunnedah-Sydney basin system on a continental scale.« less

Depositional environments and controls of Juncal Formation, southern San Rafael Mountains, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, T.J.

1987-05-01

The lower to middle Eocene Juncal Formation, north of the Santa Ynez fault in easternmost Santa Barbara County, represents the onset of marine sedimentation following an approximately 20-m.y. hiatus. The Juncal paraconformably overlies the upper Campanian Unnamed sandstone and is gradationally overlain by the middle Eocene Matilija Formation. Access to the Juncal exposures of this area was considerably enhanced by the Wheeler fire of July 1985. Facies analysis of both the vertical and lateral exposures of the Juncal Formation (approx. 1400 m thick) indicate that the Juncal represents coalescing outer-fan depositional lobes. This interpretation is based on the lateral continuitymore » of sandstone beds, presence of thickening-upward cycles, and high-concentration sediment gravity flows, bathyal fauna, and regional associations. Local channelization (to 10 m deep) represents the extension of a mid-fan channel over its associated depositional lobe. Outcrops are subparallel to depositional strike in the eastern part of the study area and form a broad syncline in the western part. Together, these exposures allow documentation of the depositional lobes vertically, laterally, and longitudinally. Outer-fan deposits of the Juncal Formation are part of a progradational basin-filling episode. The Juncal grades upward into the outer- to mid-fan depositions of the lower Matilija Formation. The upper Matilija Formation shoals upward into deltaic facies. This regressive sedimentary sequence was probably initiated by the major sea level fall which occurred near the early/middle Eocene boundary and coincides with the onset of fan sedimentation elsewhere along the California margin. Within the study area, depositional lobe activity was probably governed by either minor fluctuations in relative sea level or channel switching up-system.« less

Rock Physics and Petrographic Parameters Relationship Within Siliciclastic Rocks: Quartz Sandstone Outcrop Study Case

NASA Astrophysics Data System (ADS)

Syafriyono, S.; Caesario, D.; Swastika, A.; Adlan, Q.; Syafri, I.; Abdurrokhim, A.; Mardiana, U.; Mohamad, F.; Alfadli, M. K.; Sari, V. M.

2018-03-01

Rock physical parameters value (Vp and Vs) is one of fundamental aspects in reservoir characterization as a tool to detect rock heterogenity. Its response is depend on several reservoir conditions such as lithology, pressure and reservoir fluids. The value of Vp and Vs is controlled by grain contact and contact stiffness, a function of clay mineral content and porosity also affected by mineral composition. The study about Vp and Vs response within sandstone and its relationship with petrographic parameters has become important to define anisotrophy of reservoir characteristics distribution and could give a better understanding about local diagenesis that influence clastic reservoir properties. Petrographic analysis and Vp-Vs calculation was carried out to 12 core sample which is obtained by hand-drilling of the outcrop in Sukabumi area, West Java as a part of Bayah Formation. Data processing and interpretation of sedimentary vertical succession showing that this outcrop comprises of 3 major sandstone layers indicating fluvial depositional environment. As stated before, there are 4 petrographic parameters (sorting, roundness, clay mineral content, and grain contact) which are responsible to the differences of shear wave and compressional wave value in this outcrop. Lithology with poor-sorted and well- roundness has Vp value lower than well-sorted and poor-roundness (sub-angular) grain. For the sample with high clay content, Vp value is ranging from 1681 to 2000 m/s and could be getting high until 2190 to 2714 m/s in low clay content sample even though the presence of clay minerals cannot be defined neither as matrix nor cement. The whole sample have suture grain contact indicating telogenesis regime whereas facies has no relationship with Vp and Vs value because of the different type of facies show similar petrographic parameters after diagenesis.

Shallow properties of faults in carbonate rocks - The Jandaíra Formation, Potiguar Basin, Brazil

NASA Astrophysics Data System (ADS)

Bezerra, F. H.; Bertotti, G.; Rabelo, J.; Silva, A. T.; Carneiro, M. A.; Cazarin, C. L.; Silva, C. C.; Vieira, M. M.; Bisdom, K.; Moraes, A.

2014-12-01

We studied the development of shallow faults in the Jandaíra Formation, a Turonian-Campanian carbonate platform in the Potiguar Basin, northeastern Brazil. Our main goal was to characterize fault geometry and properties such as porosity and permeability, and associate these results with fluid flow in shallow conditions. We used an integrated multidisciplinary approach, which combined Quickbird satellite and an unmanned aerial vehicle (UAV, drone) imagery, structural and sedimentary-facies mapping, and petrographic and petrophysical analyses. The Jandaíra Formation presents a variety of carbonate facies, which include mudstones to bioclastic, peloidal, intraclastic, and oolitic grainstones. We modeled our remote sensing and structural data using a finite element analysis system for 2D deformation modeling. We applied the magnitudes and directions of the present-day stress field to simulate depths as deep as 500 m. These stress data were derived from borehole breakout data and drilling-induced tensile fractures observed in resistivity image logs. Our results indicate the occurrence of dilation processes along three sets of joints that were reactivated as faults in the upper crust: N-S, NE-, and E-W-striking faults. These faults provided preferential leaching pathways to fresh water percolation, contributing to localized dissolution and increased secondary porosity and permeability. The results also indicate that the tectonic stresses are concentrated in preferred structural zones such as fault intersection and termination, which are sites of increased fracturing and dissolution. Dissolution by fluids increased permeability in carbonate rocks from primary values of 0.0-0.94 mD to as much as 1370.11 mD. This process is mostly Cenozoic.

Neogene evolution of the North New Guinea basin, Papua New Guinea: New constraints from seismic and subsidence analysis and implications for hydrocarbon exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cullen, A.B.; Pigott, J.D.

1990-06-01

The present-day North New Guinea basin is a Plio-Pleistocene successor basin that formed subsequent to accretion of the Finisterre volcanic arc to the Australian Plate. The Ramu, Sepik, and Piore infrabasins formed in a forearc setting relative to the continental Maramuni magmatic arc. The evolution of these infrabasins was strongly influenced by accretion of the composite Torricelli-Prince Alexander terrane to the Australian Plate. Regional reflection seismic data and tectonic subsidence-subsidence rate calculations for seven wells drilled in the North New Guinea basin reveal a complex history. The timing and magnitude of subsidence and changes in subsidence rates differ between eachmore » of the Miocene infrabasins. A diachronous middle to late Miocene unconformity generally truncates infrabasin sequences. The Nopan No. 1 in the Sepik basin, however, has a complete middle Miocene to Pleistocene sedimentary record. This well records late Miocene negative subsidence rates documenting that the Nopan anticline grew as erosion occurred elsewhere in the region. This circumstance suggests that the major, sequence-bounding unconformity results from regional uplift and deformation, rather than changes in global sea level. The Plio-Pleistocene evolution of the North New Guinea basin has two profound implications regarding hydrocarbon exploration. First, the late Pliocene structural inversion of parts of the basin hinders stratigraphic and facies correlation inferred from the present setting. The recognition of basin inversion is particularly important in the Piore basin for predicting the distribution of potential reservoir facies in the Miocene carbonates. Second, the subsidence data suggest that although potential source rocks may be thermally within the oil window, these rocks may not have had sufficient time to mature owing to their recent burial.« less

Controls on Albian-Cenomanian carbonate platform sedimentation in middle eastern region: Kesalon event, a middle Cretaceous sea level change in Israel and its correlation with global sea level changes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braun, M.; Hirsch, F.

1987-05-01

After Neocomian regional denudation, Aptian Telemim (= Blanche) carbonates onlapped the Arabian subplate, followed by Yavne-Tammun regression and Albian transgression. Near the Levant coast, the Albian-early Coniacian Judea carbonate platform interfingers with the Talme Yaffe basin to the west. To the south and east, Judea-type carbonates gradually onlap the mainly continental Kurnub (Nubia type) clastics of the peri-Arabian belt. Detailed analysis of the cyclic sedimentation within the 700-m thick Judea Limestone reveals a regressive trend near the top of the Albian Yagur Formation in Galilee, the Hevyon Formation in the Negev, and the ledge of the Kesalon formation in centralmore » Israel Judean Hills, which represents the end of the Early Cretaceous sedimentary cycle. The early Cenomanian marly chalk of the En Yorqeam Formation starts the Cenomanian cycle, followed by bedded and massive dolomite and ammonoid-bearing limestone. Platform sedimentation before this Kesalon event is dominated by bank facies with some rudistid bioherms of presumable Albian age. After the Kesalon event, Cenomanian and Turonian platforms have fast-changing paleogeography on basinal chalks, shales, bioherms and backreef lagoons. Facies boundaries, running mainly east-west to southwest-northeast up to the Early Cretaceous, became close to north-south in the Late Cretaceous. Albian-Cenomanian regressive-transgressive cycles in Israel match fairly well with global sea level changes, in particular the Kesalon event, which corresponds to the Ka-Kb sea level change of Vail et al. Late Turonian-early Senonian thrusting of the peri-Arabian alpine belt and folding in the Syrian arc heavily affect the unraveling of global sea level changes on the Arabian subplate.« less

Geological and geochemical characteristics of high arsenic coals from endemic arsenosis areas in southwestern Guizhou Province, China

USGS Publications Warehouse

Ding, Z.; Zheng, B.; Long, J.; Belkin, H.E.; Finkelman, R.B.; Chen, C.; Zhou, D.; Zhou, Y.

2001-01-01

Southwest Guizhou Province is one of the most important areas of disseminated, sediment-hosted-type Au deposits in China and is an important area of coal production. The chemistry of most of the coals in SW Guizhou is similar to those in other parts of China. Their As content is near the Chinese coal average, but some local, small coal mines contain high As coals. The highest As content is up to 3.5 wt.% in the coal. The use of high As coals has caused in excess of 3000 cases of As poisoning in several villages. The high As coals are in the Longtan formation, which is an alternating marine facies and terrestrial facies. The coals are distributed on both sides of faults that parallel the regional anticlinal axis. The As content of coal is higher closer to the fault plane. The As content of coal changes greatly in different coal beds and different locations of the same bed. Geological structures such as anticlines, faults and sedimentary strata control the distribution of high As coals. Small Au deposits as well as Sb, Hg, and Th mineralization, are found near the high As coals. Although some As-bearing minerals such as pyrite, arsenopyrite, realgar (?), As-bearing sulfate, As-bearing clays, and phosphate are found in the high As coals, their contents cannot account for the abundance of As in some coals. Analysis of the coal indicates that As mainly exists in the form of As5+ and As3+, perhaps, combined with organic compounds. The occurrence of such exceptionally high As contents in coal and the fact that the As is dominantly organically associated are unique observations. ?? 201 Elsevier Science Ltd.

National Uranium Resource Evaluation: Aztec quadrangle, New Mexico and Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, M.W.

1982-09-01

Areas and formations within the Aztec 1/sup 0/ x 2/sup 0/ Quadrangle, New Mexico and Colorado considered favorable for uranium endowment of specified minimum grade and tonnage include, in decreasing order of favorability: (1) the Early Cretaceous Burro Canyon Formation in the southeastern part of the Chama Basin; (2) the Tertiary Ojo Alamo Sandstone in the east-central part of the San Juan Basin; and (3) the Jurassic Westwater Canyon and Brushy Basin Members of the Morrison Formation in the southwestern part of the quadrangle. Favorability of the Burro Canyon is based on the presence of favorable host-rock facies, carbonaceous materialmore » and pyrite to act as a reductant for uranium, and the presence of mineralized ground in the subsurface of the Chama Basin. The Ojo Alamo Sandstone is considered favorable because of favorable host-rock facies, the presence of carbonaceous material and pyrite to act as a reductant for uranium, and the presence of a relatively large subsurface area in which low-grade mineralization has been encountered in exploration activity. The Morrison Formation, located within the San Juan Basin adjacent to the northern edge of the Grants mineral belt, is considered favorable because of mineralization in several drill holes at depths near 1500 m (5000 ft) and because of favorable facies relationships extending into the Aztec Quadrangle from the Grants mineral belt which lies in the adjacent Albuquerque and Gallup Quadrangles. Formations considered unfavorable for uranium deposits of specified tonnage and grade include the remainder of sedimentary and igneous formations ranging from Precambrian to Quaternary in age. Included under the unfavorable category are the Cutler Formation of Permian age, and Dakota Sandstone of Late Cretaceous age, and the Nacimiento and San Jose Formations of Tertiary age.« less

Three-dimensional facies architecture of the Salem Limestone (middle Mississippian), Eastern Margin of Illinois basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nadeem, A.; Keith, B.D.; Thompson, T.A.

Mapping of sedimentary surfaces in the Middle Mississippian Salem Limestone exposed on sawed quarry walls in south-central Indiana has revealed a hierarchy of depositional units representative of the extremely dynamic hydrographic regime of the upper shoreface zone. The depositional units on the scale of microform and mesoform are represented by the microfacies and the facies respectively. Based on their hierarchy, genetically related depositional units and associated bounding surfaces were grouped together to construct four architectural packages (APs) of the scale of mesoforms. AP-I is dominantly an echinoderm- and bryozoan-rich grainstone and consists of bedforms ranging from small ripples bounded bymore » first-order surfaces to two- and three- dimensional megaripples bounded by the second-order surfaces. It formed as part of a giant ramp (asymmetric wavefield) within the intrashoal channel setting. AP-II, also a skeletal grainstone, is a complex of giant sandwaves that moved into the area under the infulence of a storm and partly filled the basal channel form of AP-I. Large avalanche foresets with tangential toesets prevail. AP-III is a dark-gray spatially discontinuous skeletal grainstone to packstone that laterally grades into a skeletal packstone to wackestone. It locally developed overhangs, rips-ups, and hardground on its upper surface. AP-IV is a skeletal and oolitic grainstone formed of tabular two-dimensional megaripples (planar cross-beds) and three-dimensional oscillatory megaripples (trough cross-beds). These architectural packages based on the bedform architecture and micro-and mesoscale compositional changes can be used to characterize micro-, meso, and macroscale heterogeneities. Models of facies architecture from this and similar outcrop studies can be applied to the subsurface Salem reservoirs in the Illinois Basin using cores.« less

Use of a Land Streamer System to Image the Potomac Formation in Northern Delaware

NASA Astrophysics Data System (ADS)

Velez, C. C.; McLaughlin, P. P.; McGeary, S.; Sargent, S. L.

2008-12-01

A land streamer system, an alternative to conventional seismic acquisition equipment for collecting large amounts of seismic reflection data in urbanized and semi-urbanized areas, was used to collect a network of high-resolution seismic reflection data in northern Delaware. The principal objective of this work is to image the distribution and geometry of sand bodies in the Cretaceous (Aptian to Cenomanian) non-marine deposits of the Potomac Formation. The Potomac Formation includes the most important confined aquifers in the Coastal Plain of northern Delaware. Previous studies indicate these deposits onlap Paleozoic basement at depths from 115 m to 400 m in the study area and are truncated by an unconformity. Previous descriptions of sedimentary facies from nearby cores and geophysical logs indicate that the Potomac Formation is a predominantly fine-grained alluvial unit with laterally discontinuous fluvial sand bodies, resulting in a "labyrinth style heterogeneity" for aquifer facies. The 20-km seismic dataset collected for this study indicates that land-streamer seismic methods can be used in this area to image the subsurface geology as shallow as 18 m and as deep as the basement at 315 m. The theoretical quarter wavelength of the seismic dataset suggests a resolution of 2 to 4 m, which is sufficient to resolve aquifer sands in the Potomac Formation ranging from 10 to 20 m thick. Final processed seismic sections will be integrated with geophysical logs and core data to provide a robust 2-D dataset that will allow assessment of current concepts for facies and correlations in the Potomac Formation, thus benefiting understanding of critical ground-water resources.

Modeling 3-D permeability distribution in alluvial fans using facies architecture and geophysical acquisitions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Lin; Gong, Huili; Dai, Zhenxue

Alluvial fans are highly heterogeneous in hydraulic properties due to complex depositional processes, which make it difficult to characterize the spatial distribution of the hydraulic conductivity ( K). An original methodology is developed to identify the spatial statistical parameters (mean, variance, correlation range) of the hydraulic conductivity in a three-dimensional (3-D) setting by using geological and geophysical data. More specifically, a large number of inexpensive vertical electric soundings are integrated with a facies model developed from borehole lithologic data to simulate the log 10( K) continuous distributions in multiple-zone heterogeneous alluvial megafans. The Chaobai River alluvial fan in the Beijing Plain,more » China, is used as an example to test the proposed approach. Due to the non-stationary property of the K distribution in the alluvial fan, a multiple-zone parameterization approach is applied to analyze the conductivity statistical properties of different hydrofacies in the various zones. The composite variance in each zone is computed to describe the evolution of the conductivity along the flow direction. Consistently with the scales of the sedimentary transport energy, the results show that conductivity variances of fine sand, medium-coarse sand, and gravel decrease from the upper (zone 1) to the lower (zone 3) portion along the flow direction. In zone 1, sediments were moved by higher-energy flooding, which induces poor sorting and larger conductivity variances. The composite variance confirms this feature with statistically different facies from zone 1 to zone 3. Lastly, the results of this study provide insights to improve our understanding on conductivity heterogeneity and a method for characterizing the spatial distribution of  K in alluvial fans.« less

Sedimentary facies and Holocene progradation rates of the Changjiang (Yangtze) delta, China

NASA Astrophysics Data System (ADS)

Hori, Kazuaki; Saito, Yoshiki; Zhao, Quanhong; Cheng, Xinrong; Wang, Pinxian; Sato, Yoshio; Li, Congxian

2001-11-01

The Changjiang (Yangtze) River, one of the largest rivers in the world, has formed a broad tide-dominated delta at its mouth during the Holocene sea-level highstand. Three boreholes (CM97, JS98, and HQ98) were obtained from the Changjiang delta plain in 1997-1998 to clarify the characteristics of tide-dominated delta sediments and architecture. Based on sediment composition and texture, and faunal content, core sediments were divided into six depositional units. In ascending order, they were interpreted as tidal sand ridge, prodelta, delta-front, subtidal to lower intertidal flat, upper intertidal flat, and surface soil deposits. The deltaic sequence from the prodelta deposits to the delta front deposits showed an upward-coarsening succession, overlain by an upward-fining succession from the uppermost part of the delta front deposits to the surface soil. Thinly interlaminated to thinly interbedded sand and mud (sand-mud couplets), and bidirectional cross laminations in these deposits show that tide is the key factor affecting the formation of Changjiang deltaic facies. Sediment facies and their succession combined with AMS 14C dating revealed that isochron lines cross unit boundaries clearly, and delta progradation has occurred since about 6000 to 7000 years BP, when the rising sea level neared or reached its present position. The average progradation rate of the delta front was approximately 50 km/kyear over the last 5000 years. The progradation rate, however, increased abruptly ca. 2000 years BP, going from 38 to 80 km/kyear. The possible causes for this active progradation could have been an increase in sediment production in the drainage basin due to widespread human interference and/or decrease in deposition in the middle reaches related to the channel stability caused by human activity and climatic cooling after the mid-Holocene.

Modeling 3-D permeability distribution in alluvial fans using facies architecture and geophysical acquisitions

DOE PAGES

Zhu, Lin; Gong, Huili; Dai, Zhenxue; ...

2017-02-03

Alluvial fans are highly heterogeneous in hydraulic properties due to complex depositional processes, which make it difficult to characterize the spatial distribution of the hydraulic conductivity ( K). An original methodology is developed to identify the spatial statistical parameters (mean, variance, correlation range) of the hydraulic conductivity in a three-dimensional (3-D) setting by using geological and geophysical data. More specifically, a large number of inexpensive vertical electric soundings are integrated with a facies model developed from borehole lithologic data to simulate the log 10( K) continuous distributions in multiple-zone heterogeneous alluvial megafans. The Chaobai River alluvial fan in the Beijing Plain,more » China, is used as an example to test the proposed approach. Due to the non-stationary property of the K distribution in the alluvial fan, a multiple-zone parameterization approach is applied to analyze the conductivity statistical properties of different hydrofacies in the various zones. The composite variance in each zone is computed to describe the evolution of the conductivity along the flow direction. Consistently with the scales of the sedimentary transport energy, the results show that conductivity variances of fine sand, medium-coarse sand, and gravel decrease from the upper (zone 1) to the lower (zone 3) portion along the flow direction. In zone 1, sediments were moved by higher-energy flooding, which induces poor sorting and larger conductivity variances. The composite variance confirms this feature with statistically different facies from zone 1 to zone 3. Lastly, the results of this study provide insights to improve our understanding on conductivity heterogeneity and a method for characterizing the spatial distribution of  K in alluvial fans.« less

Ages of the Xinghuadukou Group in the Erguna Block, NE China

NASA Astrophysics Data System (ADS)

Liu, X.; Hou, W.

2016-12-01

The Xinghuadukou group is outcropped in the Erguna block (EB) of NE China, which is an important component of the eastern segment of the Central Asian Orogenic Belt (CAOB). This group was previously classified as Paleoproterozoic in age. However, recent studies reported Paleozoic ages from the meta-volcanic rocks, Paleoproterozoic to Neoarchean detrital zircon ages from the meta-sedimentary rocks and Neoproterozoic ages from the granitoids. The tectonic affinity of the EB is still debated. In order to clarify the aforementioned issues, 19 samples were collected from the Xinghuadukou group from the Mohe region in NE China. All samples underwent gneiss facies metamorphism, including two-mica granitic gneiss and quartz biotite gneiss. Based on the protolith discrimination diagram of Si—(al+fm)-(c+alk) system, 7 samples originated from sedimentary rocks and the other 12 of igneous origin. The orthogneiss samples were plotted as diorite, granodiorite and granite respectively in TAS, showing felsic character (SiO2 57% - 74%). One orthogneiss and one paragneiss samples were chosen to conduct the LA-ICP-MS U-Pb zircon age analysis. Apart from one zircon with the age of 742 Ma shows evident metamorphic rim, all zircons from the orthogneiss show euhedral to subhedral prismatic shape and typical concentric or oscillatory structure indicating the igneous origin. The concordant age of 2478±26 Ma was generated, indicating the existence of the near Archean basement of the EB. The detrital zircons from the paragneiss produced age populations cluster at 0.6, 0.8, 1.9, 2.6 and 2.7 Ga, lacking of the Grenville event age. The youngest zircon age is 395 Ma, taken as the maximum depositional age of the sedimentary protolith. According to the new data obtained, it is suggested that the Xinghuadukou group comprises the early Paleoproterozoic granite-gneiss, which proves the granitic basement of the Erguna block. The sedimentary rocks formed overlying the basement during the early Paleozoic and underwent metamorphism afterward. Compared with the detrital zircon ages profile of S. Siberia, NCC, Tarim, Mongolia and NE Gondwana, the EB is suggested most likely affiliated with NE Gondwana. Therefore, this study prefers a tectonic scenario that the EB drifted from the NE Gondwana and joined the CAOB tectonic domain during the Paleozoic.

Sedimentary record of seismic events in the Eocene Green River Formation and its implications for regional tectonics on lake evolution (Bridger Basin, Wyoming)

NASA Astrophysics Data System (ADS)

Törő, Balázs; Pratt, Brian R.

2016-10-01

Outcrops and cores from the top of the lacustrine Tipton Member and the base of the Wilkins Peak Member ( 51.5 Ma) of the Eocene Green River Formation, Bridger Basin in southwestern Wyoming yield a wide variety of sedimentary deformation features many of which are laterally extensive for more than 50 km. They include various types of folds, load structures, pinch-and-swell structures, microfaults, breccias and sedimentary dikes. In most cases deformation is represented by hybrid brittle-ductile structures exhibiting lateral variation in deformation style. These occur in low-energy, profundal organic-rich carbonate mudstones (oil shales), trona beds, tuffs, and profundal to sublittoral silty carbonate deposited in paleolake Gosiute. The deformation is not specific to the depositional environment because sedimentary units stratigraphically higher with similar facies show no deformation. The studied interval lacks any evidence for possible trigger mechanisms intrinsic to the depositional environment, such as strong wave action, rapid sediment loading, evaporite dissolution and collapse, or desiccation, so 'endogenic' causes are ruled out. Thus, the deformation features are interpreted as seismites, and change in deformation style and inferred increase in intensity towards the south suggest that the earthquakes were sourced from the nearby Uinta Fault System. The 22 levels exhibiting seismites recognized in cores indicate earthquakes with minimum magnitudes between 6 and 7, minimum epicentral intensity (MCS) of 9, and varying recurrence intervals in the seismic history of the Uinta Fault System, with a mean apparent recurrence period of 8.1 k.y. using average sedimentation rates and dated tuffs; in detail, however, there are two noticeably active periods followed by relative quiescence. The stratigraphic position of these deformed intervals also marks the transition between two distinct stages in lake evolution, from the balanced-filled Tipton Member to the overlying, underfilled Wilkins Peak Member. Thus, these seismites are evidence for regional-scale changes in lacustrine sedimentation of Eocene Lake Gosiute in response to syndepositional tectonic activity. Analysis of synsedimentary deformation features is, therefore, a promising yet under-utilized tool to trace the tectonic evolution of lacustrine deposits of the Green River Formation and other tectonically active marine and non-marine basins.

De nouveaux éléments structuraux du complexe aquifère profond du bassin du Rharb (Maroc) : implications hydrogéologiques

NASA Astrophysics Data System (ADS)

Kili, Malika; El Mansouri, Bouabid; Chao, Jamal; Fora, Abderrahman Ait

2006-12-01

The Rharb basin is located in northwestern Morocco. It is a part of one of the most important hydrogeological basins of Morocco, and extends over some 4000 km 2. The nature of its Plio-Quaternary sedimentary fill and its structural and palaeoenvironmental contexts are reflected by great variations in aerial and temporal facies distribution. This distribution, in turn, is a direct cause of the observed complexity in the geometry of potentially water-bearing beds. In the present work, we present an image of potential new hydrogeological reservoirs and define new structures that partially explain their architecture. To cite this article: M. Kili et al., C. R. Geoscience 338 (2006).

Sedimentology of the Early Jurassic terrestrial Steierdorf Formation in Anina, Colonia Cehă Quarry, South Carpathians, Romania

NASA Astrophysics Data System (ADS)

Kędzior, Artur; Popa, Mihai E.

2013-06-01

Kędzior, A. and Popa, E.M. 2013. Sedimentology of the Early Jurassic terrestrial Steierdorf Formation in Anina, Colonia Cehă Quarry, South Carpathians, Romania. Acta Geologica Polonica, 63 (2), 175-199. Warszawa. The continental, coal bearing Steierdorf Formation, Hettangian - Sinemurian in age, is included in the Mesozoic cover of the Reşiţa Basin, Getic Nappe, South Carpathians, Romania. The Steierdorf Formation can be studied in Anina, a coal mining center and an exceptional locality for Early Jurassic flora and fauna, occurring in the middle of the Reşiţa Basin. This paper presents the results of sedimentological, stratigraphical and paleobotanical researches undertaken in Colonia Cehă open cast mine in Anina, where the Steierdorf Formation outcrops widely. Several sedimentary facies associations have been described, these associations permitting the reconstruction of various depositional systems such as alluvial fans, braided and meandering river systems, as well as lacustrine and coal generating marsh systems of the Steierdorf Formation. The sedimentary associations recorded within the Steierdorf Formation show a gradual fining upward trend, pointing to a rising marine water table and a decreasing relief within the source area.

Sedimentary evolution of the Pliocene and Pleistocene Ebro margin, northeastern Spain

USGS Publications Warehouse

Alonso, B.; Field, M.E.; Gardner, J.V.; Maldonado, A.

1990-01-01

The Pliocene and Pleistocene deposits of the Spanish Ebro margin overlie a regional unconformity and contain a major disconformity. These unconformities, named Reflector M and Reflector G, mark the bases of two seismic sequences. Except for close to the upper boundary where a few small channel deposits are recognized, the lower sequence lacks channels. The upper sequence contains nine channel-levee complexes as well as base-of-slope aprons that represent the proximal part of the Valencia turbidite system. Diverse geometries and variations in seismic units distinguish shelf, slope, base-of-slope and basin-floor facies. Four events characterize the late Miocene to Pleistocene evolution of the Ebro margin: (a) formation of a paleodrainage system and an extensive erosion-to-depositional surface during the latest Miocene (Messinian), (b) deposition of hemipelagic units during the early Pliocene, (c) development of canyons during the late Pliocene to early Pleistocene, and (d) deposition of slope wedges, channel-levee complexes, and base-of-slope aprons alternating with hemipelagic deposition during the Pleistocene. Sea-level fluctuations influenced the evolution of the sedimentary sequences of the Ebro margin, but the major control was the sediment supply from the Ebro River. ?? 1990.

Late Quaternary paleoenvironments and paleoclimatic conditions in the distal Andean piedmont, southern Mendoza, Argentina

NASA Astrophysics Data System (ADS)

Tripaldi, Alfonsina; Zárate, Marcelo A.; Brook, George A.; Li, Guo-Qiang

2011-09-01

The Andean piedmont of Mendoza is a semiarid region covered by extensive and partially vegetated dune fields consisting of mostly inactive aeolian landforms of diverse size and morphology. This paper is focused on the San Rafael plain (SRP) environment, situated in the distal Andean piedmont of Mendoza (34° 30'S), and reports the sedimentology and OSL chronology of two representative exposures of late Quaternary deposits, including their paleoenvironmental and paleoclimatic significance. Eleven facies, including channel, floodplain, fluvio-aeolian interaction, and reworked pyroclastic and aeolian deposits, were described and grouped into two facies associations (FA1 and FA2). FA1 was formed by unconfined sheet flows, minor channelized streams and fluvial-aeolian interaction processes. FA2 was interpreted as aeolian dune and sand-sheet deposits. OSL chronology from the SRP sedimentary record indicates that between ca. 58-39 ka and ca. 36-24 ka (MIS 3), aggradation was governed by ephemeral fluvial processes (FA1) under generally semiarid conditions. During MIS 2, the last glacial maximum (ca. 24-12 ka), a major climatic shift to more arid conditions is documented by significant aeolian activity (FA2) that became the dominant sedimentation process north of the Diamante-Atuel fluvial system. The inferred paleoenvironmental conditions from the SRP sections are in broad agreement with regional evidence.

The sea-level highstand correlated to marine isotope stage (MIS) 7 in the coastal plain of the state of Rio Grande do Sul, Brazil.

PubMed

Lopes, Renato P; Dillenburg, Sergio R; Schultz, Cesar L; Ferigolo, Jorge; Ribeiro, Ana Maria; Pereira, Jamil C; Holanda, Elizete C; Pitana, Vanessa G; Kerber, Leonardo

2014-12-01

The coastal plain of the state of Rio Grande do Sul, in southern Brazil, includes four barrier-lagoon depositional systems formed by successive Quaternary sea-level highstands that were correlated to marine isotope stages (MIS) 11, 9, 5 and 1, despite the scarcity of absolute ages. This study describes a sea-level highstand older than MIS 5, based on the stratigraphy, ages and fossils of the shallow marine facies found in coastal barrier (Barrier II). This facies outcrops along the banks of Chuí Creek, it is composed of fine, well-sorted quartz sand and contains ichnofossils Ophiomorpha nodosa and Rosselia sp., and molluscan shells. The sedimentary record indicates coastal aggradation followed by sea-level fall and progradation of the coastline. Thermoluminescence (TL) and electron spin resonance (ESR) ages from sediments and fossil shells point to an age of ∼220 ka for the end of this marine transgression, thus correlating it to MIS 7 (substage 7e). Altimetric data point to a maximum amplitude of about 10 meters above present-day mean sea-level, but tectonic processes may be involved. Paleoceanographic conditions at the time of the highstand and correlations with other deposits in the Brazilian coasts are also discussed.

Stratigraphic framework of inner shelf storm-dominated sand ridges, Alabama EEZ: Implications for sequence stratigraphy, global climate change, and petroleum exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davies, D.J.; Parker, S.J.

The Alabama exclusive economic zone (EEZ) contains an abundance of orthoquartzitic shelf sand ridges elongate northwest-southeast diagonally from the shoreline. Soft-sediment peels from 59 Vibracores[sup TM] from the Alabama inner shelf permit detailed description of sand ridge sedimentary structures, fabrics, and eight sea-floor sediment types. These overlie the pre-Holocene sequence boundary and lower Holocene transgressive sediments. In general, the ridges are capped by coarse stacked graded shelly sands, echinoid sands, and clean sands deposited well above storm wave base. The graded shelly sand microfacies, the most common sediment type, is inferred to represent shelf storm deposits because of its gradedmore » nature, sharp base, and variable thickness (0.1 to 4 m). Considerable patchiness of facies is found on a single sand ridge. The facies patchiness may result from the interplay between relict sediment distribution, present hydrodynamics and local difference in preserved shell content. Due to the microtidal regime of the Alabama EEZ and the prevalence of the graded sands on the ridge crests, the ridges are interpreted to be dominantly storm-wave in origin. This type of coarse, clean sandy deposit is a poorly studied yet important possible model for many shelf-sand petroleum reservoirs.« less

The sea-level highstand correlated to marine isotope stage (MIS) 7 in the coastal plain of the state of Rio Grande do Sul, Brazil.

PubMed

Lopes, Renato P; Dillenburg, Sergio R; Schultz, Cesar L; Ferigolo, Jorge; Ribeiro, Ana Maria; Pereira, Jamil C; Holanda, Elizete C; Pitana, Vanessa G; Kerber, Leonardo

2014-12-09

The coastal plain of the state of Rio Grande do Sul, in southern Brazil, includes four barrier-lagoon depositional systems formed by successive Quaternary sea-level highstands that were correlated to marine isotope stages (MIS) 11, 9, 5 and 1, despite the scarcity of absolute ages. This study describes a sea-level highstand older than MIS 5, based on the stratigraphy, ages and fossils of the shallow marine facies found in coastal barrier (Barrier II). This facies outcrops along the banks of Chuí Creek, it is composed of fine, well-sorted quartz sand and contains ichnofossils Ophiomorpha nodosa and Rosselia sp., and molluscan shells. The sedimentary record indicates coastal aggradation followed by sea-level fall and progradation of the coastline. Thermoluminescence (TL) and electron spin resonance (ESR) ages from sediments and fossil shells point to an age of ∼220 ka for the end of this marine transgression, thus correlating it to MIS 7 (substage 7e). Altimetric data point to a maximum amplitude of about 10 meters above present-day mean sea-level, but tectonic processes may be involved. Paleoceanographic conditions at the time of the highstand and correlations with other deposits in the Brazilian coasts are also discussed.

Feast to famine: Sediment supply control on Laramide basin fill

NASA Astrophysics Data System (ADS)

Carroll, Alan R.; Chetel, Lauren M.; Elliot Smith, M.

2006-03-01

Erosion of Laramide-style uplifts in the western United States exerted an important first-order influence on Paleogene sedimentation by controlling sediment supply rates to adjacent closed basins. During the latest Cretaceous through Paleocene, these uplifts exposed thick intervals of mud-rich Upper Cretaceous foreland basin fill, which was quickly eroded and redeposited. Cretaceous sedimentary lithologies dominate Paleocene conglomerate clast compositions, and the volume of eroded foreland basin strata is approximately twice the volume of preserved Paleocene basin fill. As a result of this sediment oversupply, clastic alluvial and paludal facies dominate Paleocene strata, and are associated with relatively shallow and ephemeral freshwater lake facies. In contrast, large, long-lived, carbonate-producing lakes occupied several of the basins during the Eocene. Basement-derived clasts (granite, quartzite, and other metamorphic rocks) simultaneously became abundant in lower Eocene conglomerate. We propose that Eocene lakes developed primarily due to exposure of erosion-resistant lithologies within cores of Laramide uplifts. The resultant decrease in erosion rate starved adjacent basins of sediment, allowing the widespread and prolonged deposition of organic-rich lacustrine mudstone. These observations suggest that geomorphic evolution of the surrounding landscape should be considered as a potentially important influence on sedimentation in many other interior basins, in addition to more conventionally interpreted tectonic and climatic controls.

Sequence Stratigraphic Analysis and Facies Architecture of the Cretaceous Mancos Shale on and Near the Jicarilla Apache Indian Reservation, New Mexico-their relation to Sites of Oil Accumulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ridgley, Jennie

2001-08-21

The purpose of phase 1 and phase 2 of the Department of Energy funded project Analysis of oil- bearing Cretaceous Sandstone Hydrocarbon Reservoirs, exclusive of the Dakota Sandstone, on the Jicarilla Apache Indian Reservation, New Mexico was to define the facies of the oil producing units within the Mancos Shale and interpret the depositional environments of these facies within a sequence stratigraphic context. The focus of this report will center on (1) redefinition of the area and vertical extent of the ''Gallup sandstone'' or El Vado Sandstone Member of the Mancos Shale, (2) determination of the facies distribution within themore » ''Gallup sandstone'' and other oil-producing sandstones within the lower Mancos, placing these facies within the overall depositional history of the San Juan Basin, (3) application of the principals of sequence stratigraphy to the depositional units that comprise the Mancos Shale, and (4) evaluation of the structural features on the Reservation as they may control sites of oil accumulation.« less

Bedrock Geology and Asbestos Deposits of the Upper Missisquoi Valley and Vicinity, Vermont

USGS Publications Warehouse

Cady, Wallace Martin; Albee, Arden Leroy; Chidester, A.H.

1963-01-01

The upper Missisquoi Valley and vicinity as described in this report covers an area of about 250 square miles at the headwaters of the Missisquoi River in north-central Vermont. About 90 percent of the area is forested and the remainder is chiefly farm land. The topography reflects the geologic structure and varied resistance of the bedrock to erosion. Most of the area is on the east limb of the Green Mountain anticlinorium, which is the principal structural feature of Vermont. The bedrock is predominantly sedimentary and volcanic rock that has been regionally metamorphosed. It was intruded before metamorphism by mafic and ultramafic igneous rocks, and after metamorphism by felsic and mafic igneous rocks. The metamorphosed sedimentary and volcanic rocks range in age from Cambrian(?) to Middle Silurian, the intrusive igneous rocks from probably Late Ordovician to probably late Permian. Metamorphism and principal folding in the region occurred in Middle Devonian time. The metamorphosed sedimentary and volcanic rocks make up a section at least 25,000 feet thick and can be divided into nine formations. The Hazens Notch formation of Cambrian(?) and Early Cambrian age is characterized by carbonaceous schist. It is succeeded in western parts of the area by the Jay Peak formation of Early Cambrian age, which is chiefly a schist that is distinguished by the general absence of carbonaceous zones; in central parts of the area the Hazens Notch formation is followed by the Belvidere Mountain amphibolite, probably the youngest of the formations of Early Cambrian age. The Ottauquechee formation, composed of carbonaceous phyllite and quartzite, and phyllitic graywacke, is of Middle Cambrian age. The Stowe formation of Late Cambrian(?) and Early(?) Ordovician age overlies the Ottauquechee and is predominantly noncarbonaceous schist, though it also contains greenstone and carbonaceous schist and phyllite. The Umbrella Hill formation of Middle Ordovician age is characteristically a conglomerate in which the mineral chloritoid is common. The overlying Moretown formation, also of Middle Ordovician age, contains granulite and slate, also greenstone and amphibolite of the Coburn Hill volcanic member. The Shaw Mountain formation, made up of conglomerate, phyllite, and limestone, is the oldest Silurian unit. The Shaw Mountain formation is succeeded by the Northfield slate of Middle Silurian age. The igneous rocks of the region include various ultramafic plutonic rocks, such as dunite, peridotite, and serpentinite, probably of Late Ordovician age; sills and nearly concordant dikes of metagabbro of Late Ordovician age; biotite granite plutons or Middle or Late Devonian age, most notably on Eltey Mountain; and hypabyssallamprophyre, probably of late Permian age. Metamorphic zoning is shown by the distribution of rocks of the epidote-amphibolite facies and the greenschist facies in and near the Green Mountains, and near Coburn Hill and Eltey Mountain. Metasomatism related to regional metamorphism has produced porphyroblasts and quartz segregations in the sedimentary and volcanic rocks, and steatitization and carbonatization of serpentinite. Contact metamorphism has formed rocks of the epidote-amphibolite facies near granite plutons, and probably calc-silicate rock at the contacts of ultramafic plutons. The axial anticline of the Green Mountain anticlinorium and other anticlines and synclines to the east are the major longitudinal structural features of the area. These structures are complicated by transverse folds, particularly a syncline in the vicinity of Tillotson Peak. Early minor cross folds that are best developed in the Hazens Notch formation are believed to be genetically related to the transverse folds. The axial planes of the cross folds are folded about the axes of the later longitudinal folds of the Green Mountain anticlinorium. The longitudinal and transverse fold systems probably formed in the same episode of defor

Recovery and Lithologic Analysis of Sediment from Hole UT-GOM2-1-H002, Green Canyon 955, Northern Gulf of Mexico

NASA Astrophysics Data System (ADS)

Kinash, N.; Cook, A.; Sawyer, D.; Heber, R.

2017-12-01

In May 2017 the University of Texas led a drilling and pressure coring expedition in the northern Gulf of Mexico, UT-GOM2-01. The holes were located in Green Canyon Block 955, where the Gulf of Mexico Joint Industry Project Leg II identified an approximately 100m thick hydrate-filled course-grained levee unit in 2009. Two separate wells were drilled into this unit: Holes H002 and H005. In Hole H002, a cutting shoe drill bit was used to collect the pressure cores, and only 1 of the 8 cores collected was pressurized during recovery. The core recovery in Hole H002 was generally poor, about 34%, while the only pressurized core had 45% recovery. In Hole H005, a face bit was used during pressure coring where 13 cores were collected and 9 cores remained pressurized. Core recovery in Hole H005 was much higher, at about 75%. The type of bit was not the only difference between the holes, however. Drilling mud was used throughout the drilling and pressure coring of Hole H002, while only seawater was used during the first 80m of pressure cores collected in Hole H005. Herein we focus on lithologic analysis of Hole H002 with the goal of documenting and understanding core recovery in Hole H002 to compare with Hole H005. X-ray Computed Tomography (XCT) images were collected by Geotek on pressurized cores, mostly from Hole H005, and at Ohio State on unpressurized cores, mostly from Hole H002. The XCT images of unpressurized cores show minimal sedimentary structures and layering, unlike the XCT images acquired on the pressurized, hydrate-bearing cores. Only small sections of the unpressurized cores remained intact. The unpressurized cores appear to have two prominent facies: 1) silt that did not retain original sedimentary fabric and often was loose within the core barrel, and 2) dense mud sections with some sedimentary structures and layering present. On the XCT images, drilling mud appears to be concentrated on the sides of cores, but also appears in layers and fractures within intact core sections. On microscope images, the drilling mud also appears to saturate the pores in some silt intervals. Further analysis of the unpressurized cores is planned, including X-ray diffraction, grain size analysis and porosity measurements. These results will be compared to the pressurized cores to understand if further lithologic factors could have affected core recovery.

Metasomatic Evolution in Tectonically Mixed Zones (Mélange) and Significance for Geochemical Evolution of the Slab-Mantle Interface

NASA Astrophysics Data System (ADS)

Bebout, G. E.; King, R. L.

2012-12-01

Fluid flow focused in highly deformed zones (shear zones), and the physical juxtaposition of chemically disparate rocks (via mechanical mixing) in such zones, can lead to extensive metasomatism, including volume strain, and result in rocks with hybridized compositions little resembling the compositions of the incorporated rock types [1-5]. In the Catalina Schist (California), lawsonite-albite, lawsonite-blueschist, and amphibolite-facies units contain shear zones at scales of meters to kilometers, each containing "blocks" (with more spherical or more tabular dimensions) co-facial in grade with the "matrix" surrounding these blocks [1-3]. Oxygen isotope data for these "mélange" units, and adjacent more "coherent" expanses, indicate enhanced fluid flow in the more strongly deforming mélange zones while fluid flow in coherent domains was dominantly fracture-controlled and episodic. The amphibolite-facies mélange unit shows evidence for km-scale equilibration of varying mineral assemblages with H2O-rich fluids with uniform O and H isotope compositions consistent with a lower-grade metasedimentary source. This unit is believed to have formed largely by mechanical mixing of mafic and ultramafic compositions, partly because of the scarcity of sedimentary blocks. However, the mélange matrix in this unit preserves a number of sedimentary chemical/isotopic characteristics (e.g., Pb isotope compositions [3]) that could reflect the incorporation of sedimentary rocks, with or without fluid-related fractionation, and possibly fluid-mediated additions. Tectonically mixed zones such as these, if volumetrically significant at the slab-mantle interface, could exert disproportionate control on the compositions of hydrous fluids or silicate melts emanating from subducting slabs and entering the forearc to backarc mantle wedge, including those contributing to arc magmatism [1-5]. Geochemical studies of arc lavas should consider the possibility that the "fluids" contributed from slabs to arc source regions bear chemical/isotopic signatures reflecting their interaction with these hybridized zones produced by mixing of varying proportions of sedimentary, mafic, and ultramafic compositions. Also, the high-variance hydrous mineral assemblages created by these coeval mechanical and metasomatic processes (e.g., nearly monomineralic chlorite, talc, and amphibole schists) could play an important role in the volatiles budgets at subduction zones (i.e., having stabilities to P and T significantly higher than those for mineral assemblages in metabasaltic and metasedimentary rocks containing the same mineral phases [1,4]). Field, petrologic/geochemical, theoretical, and geophysical studies should work toward assessment of the volumetric significance, physical properties, and devolatilization histories of these hybridized compositions. [1] Bebout and Barton (2002) Chem. Geol. 187:79-106 [2] King et al. (2006) Ear. Planet. Sci. Lett. 246:288-304 [3] King et al. (2007) Chem. Geol. 239:305-322 [4] Spandler et al. (2008) Contrib. Mineral. Petrol. 155:181-198 [5] Miller et al. (2009) Lithos 107:53-67

Pattern recognition analysis and classification modeling of selenium-producing areas

USGS Publications Warehouse

Naftz, D.L.

1996-01-01

Established chemometric and geochemical techniques were applied to water quality data from 23 National Irrigation Water Quality Program (NIWQP) study areas in the Western United States. These techniques were applied to the NIWQP data set to identify common geochemical processes responsible for mobilization of selenium and to develop a classification model that uses major-ion concentrations to identify areas that contain elevated selenium concentrations in water that could pose a hazard to water fowl. Pattern recognition modeling of the simple-salt data computed with the SNORM geochemical program indicate three principal components that explain 95% of the total variance. A three-dimensional plot of PC 1, 2 and 3 scores shows three distinct clusters that correspond to distinct hydrochemical facies denoted as facies 1, 2 and 3. Facies 1 samples are distinguished by water samples without the CaCO3 simple salt and elevated concentrations of NaCl, CaSO4, MgSO4 and Na2SO4 simple salts relative to water samples in facies 2 and 3. Water samples in facies 2 are distinguished from facies 1 by the absence of the MgSO4 simple salt and the presence of the CaCO3 simple salt. Water samples in facies 3 are similar to samples in facies 2, with the absence of both MgSO4 and CaSO4 simple salts. Water samples in facies 1 have the largest selenium concentration (10 ??gl-1), compared to a median concentration of 2.0 ??gl-1 and less than 1.0 ??gl-1 for samples in facies 2 and 3. A classification model using the soft independent modeling by class analogy (SIMCA) algorithm was constructed with data from the NIWQP study areas. The classification model was successful in identifying water samples with a selenium concentration that is hazardous to some species of water-fowl from a test data set comprised of 2,060 water samples from throughout Utah and Wyoming. Application of chemometric and geochemical techniques during data synthesis analysis of multivariate environmental databases from other national-scale environmental programs such as the NIWQP could also provide useful insights for addressing 'real world' environmental problems.

Documenting a modern day transgressive surface in a carbonate ramp setting

NASA Astrophysics Data System (ADS)

Lokier, Stephen; Paul, Andreas

2017-04-01

The low-angle carbonate ramp geometry of the Abu Dhabi coastline provides an ideal site for studying the effects of marine transgression in a setting analogous to Mesozoic epeiric seas. Supratidal sabkha evaporite precipitation passes offshore, through a broad and complex carbonate-evaporite intertidal environment, into a subtidal carbonate depositional setting. The coast of the mainland is locally isolated from open-marine conditions by a number of peninsulas and islands associated with the east-west trending Great Pearl Bank. This study combined 12 years of fieldwork observations with historical satellite imagery in order to establish multiple lines of evidence for active retrogradation over a 15 km length of coastline in the Abu Dhabi sabkha. Surveyed transects of the sabkha yield an average slope angle of 0.02°. Employing a current estimate of global sea level rise of 3.3 mm/yr, we calculate an expected present-day marine transgression of 7.9 m/yr. The landward and seaward boundaries of the microbial mat facies belt are strongly controlled by the location of the intertidal zone. The seaward limit of the Recent microbial mat belt in the Abu Dhabi Sabkha is currently being buried beneath retrograding lower-intertidal sediments whilst the landward side is simultaneously backstepping over previously-supratidal gypsum-dominated facies. The landward migration of spits and beach ridges was monitored at several locations with rates of retrogradation of up to 28 m per year being recorded locally. The study also identified numerous erosive features that are consistent with an increase in energy regimes. There has been a significant increase in denudation of the microbial mat, causing underlying sediment to be increasingly susceptible to erosion. In the lowermost intertidal zone, erosion of the hardground and other facies is observed. Clasts from the hardground are transported landward onto the surface of the sabkha where they are incorporated within other facies. This study provides definitive evidence that the current sedimentary regime of the Abu Dhabi coastline has entered a retrogradational phase associated with marine transgression. From a sequence stratigraphic perspective, the current system would be identified as a flooding (transgressive) surface.

Facies development and paleoenvironment of the Hajajah Limestone Member, Aruma Formation, central Saudi Arabia

NASA Astrophysics Data System (ADS)

El-Sorogy, Abdelbaset S.; Ismail, Abdelmoneim; Youssef, Mohamed; Nour, Hamdy

2016-12-01

The Campanian Hajajah Limestone Member of the Aruma Formation was formed during two regressive episodes. Each of them formed of three depositional facies, from base to top: 1) intra-shelf basin facies, made up of fossiliferous green shale and mudstone with ostracods and badly preserved foraminifers. 2) fore-reef facies, consists of hard, massive, marly coralline limestone. The upper part is rich with low divers, badly to moderate preserved, solitary and colonial corals, and, 3) back reef and near-shore facies, consists of fossiliferous sandy dolomitized, bioturbated limestone with abundant reworked corals, bivalves, gastropods, and aggregate grains. On the basis of field observations, micro-and macrofossils and microfacies analysis, the Hajajah Limestone Member was deposited in distal marine settings below storm wave base in a low-energy environment changed upward to fore-reef framework in an open marine environment with moderate to high energy conditions and terminated with shallow marine facies with accumulation of skeletal grains by storms during regression.

Late Quaternary environmental changes inferred from n-alkane evidence in coastal area of southern Hainan Island, China

NASA Astrophysics Data System (ADS)

Wang, Mengyuan; Zheng, Zhuo

2016-04-01

The studied core was a coastal core in Hainan Island, China. It is in length of 49.01m and divided into four Units (MIS 1~MIS 6) according to lithology description. The Optically Stimulated Luminescence (OSL) attributes the sediments from Unit 3 to the Oxygen Isotope Stage of MIS 5e (Unit 3b and 3c) and 5d (Unit 3a). To interpret the origination of organic carbons and to reconstruct paleovegetation changes, n-alkane, δ13C and TOC have been used in the present research. The result of n-alkanes distribution indicates a series of changes of sedimentary environment and terrestrial input. The shallow water facies at Unit 2, 3a and 4 is mainly characterized by short carbon chain n-alkanes and relatively low concentration. Contrasting with that of deep-water marine facies of MIS 5e (Unit 3b), the n-alkane pattern is typical bimodal and the main peaks are both in short and long carbon chains. During Unit 3b-1 (MIS 5e), more terrestrial original n-alkanes contribute to the concentration of TOC than oceanic. Organic matter source is mainly terrestrial origination. Total organic matter input mechanism of TLG-01 correlates with sediment grain size (average grain size). Total organic carbon input is enhanced with the increasing of fine grain size component. The variation of CPI (25-33) value in this study correlates with hydrological energy. The highest CPI (25-33) value is shown in the high sea level period of MIS 5e, comparing with that in MIS 5d and MIS 1. High CPI value corresponds to high TOC and average grain size (Φ) value. In the weak hydrological energy sedimentary environment, more terrestrial organic matter, together with TOC, deposit in the study area. ACL (25-33) index display higher values in the interglacial period (MIS 5 and MIS 1) than MIS 3 (sediments weathered during MIS 2) and MIS 6. Paq proxy, together with δ13C, estimates the mangrove growing depth in MIS 5e. The correlation between δ13C and each carbon chain alkane state stabilize and turbulence of sedimentary environment in MIS 5e. Sediments deposit in stable weak hydrological energy environment show order and grouped alkanes distribution (Unit 3b-2). High and positive correlation coefficients of δ13C and each carbon chain alkane show the dominant alkanes contributed to organic carbon (δ13C).

Fine-grained sediment gravity flow deposits induced by flood and lake slope failure events: examples of lacustrine varved sediments in Japan

NASA Astrophysics Data System (ADS)

Ishihara, Yoshiro; Sasaki, Yasunori; Sasaki, Hana; Onishi, Yuri

2016-04-01

Fine-grained sediment gravity flow deposits induced by flood and lake slope failure events are frequently intercalated in lacustrine successions. When sediment gravity flow deposits are present in varved sediments, it is suggested that they provide valuable information about sediment gravity flows, because they can easily trace laterally and can give the magnitude of erosion and recurrence interval of events. In addition, because large sedimentary bodies of stacked sediment gravity flow deposits in varved sediments of a calm lake are not suggested, a relatively simple depositional environment is expected. In the present study, we analysed sedimentary facies of sediment gravity flow deposits in varved lacustrine diatomites in the Middle Pleistocene Hiruzenbara and Miyajima formations in Japan, and concluded a depositional model of the lacustrine sediment gravity flow deposits. Varved diatomites: The Hiruzenbara Fm., a dammed lake fill as foots of Hiruzen Volcanos, is deposited during an interglacial period during MIS12 to 15. Varves of ca. 8000 yr were measured in a 20 m intercalating flood and lake slope failure-induced sediment gravity flow deposits. The Miyajima Fm., distributed in a paleo-caldera lake in NE Japan, includes many sediment gravity flow deposits possibly originated from fandeltas around the lake. These formations have differences in their depositional setting; the Hiruzebara Fm. was deposited in a large lake basin, whereas the Miyajima Fm. was deposited in a relatively small basin. Because of the depositional setting, intercalation of volcaniclastics is dominant in the Miyajima Fm. Lacustrine sediment gravity flow deposits: Sediment gravity flow deposits in both formations can be classified into flood- and lake slope failure-induced types based on the sedimentary facies. Composites of the both types are also found. Flood-induced types comprise fine-grained silts dominated by carbonaceous fragments, whereas lake slope failure-induced types are dominated by rip-up clasts of diatomite. The former is well continued in outcrops; however, the thickness of the latter is changeable and the lower contact is erosive. In the Hirzenbara Fm., flood-induced type includes epiphytic diatom valves as river inflows, whereas slope failure-induced type is composed of diatom valves of varved diatomite. Flood-induced types are suggested to be classified into hyperpycnal flow and hypopycnal flow types with regard to the presence of basal erosion. On the other hand, slope failure-induced types can be interpreted as debris flow deposits occurred in the lakes. Differences in the two types are also shown as bed-thickness frequency distributions indicating event magnitude.

Tectonic implications of facies patterns, Lower Permian Dry Mountain trough, east-central Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallegos, D.M.; Snyder, W.S.; Spinosa, C.

1991-02-01

Paleozoic tectonism is indicated by a study of a west-east facies analysis transect across the northern portion of the Lower Permian Dry Mountain trough (DMT). In an attempt to characterize the Early Permian basin-filling sequences, three broadly recognizable facies packages have been identified across the DMT: the western margin facies and the central basin facies of the DMT and an eastern shelf facies. In the western margin facies of the basin, pulses of tectonic activity are recorded at McCloud Spring in the Sulphur Springs Range. Here, shallow open-marine carbonate overlies eroded Vinini Formation and, in turn, is unconformably overlain bymore » basinal marine carbonate. An unconformity also marks the contact with the overriding prograding coarse clastic facies. These abrupt transitions suggest the sediments were deposited in a tectonically active area where they preservation of Waltherian sequences is unlikely to occur. Similarly abrupt transitions are evident in the western part of the central basin facies. At Portuguese Springs n the Diamond Range, a thin basal marine conglomerate delineates Lower Permian sedimentation over the Pennsylvanian Ely Formation. Coarsening-upward basinal carbonate strata of pelagic, hemipelagic, and turbidite components overlie the basal conglomerate. this progression of sediments is unconformably overlain by a subaerial sequence of coarse clastic deposits. Within the eastern part of the central basin facies in the Maverick Spring Range, the Lower Permian sediments are open-marine siltstone, wackestone, packstone, and grainstone. The sediments are assigned to a gradually sloping ramp, indicating the effects of tectonism on this margin of the basin were subdued.« less

Tectonostratigraphy and depositional history of the Neoproterozoic volcano-sedimentary sequences in Kid area, southeastern Sinai, Egypt: Implications for intra-arc to foreland basin in the northern Arabian-Nubian Shield

NASA Astrophysics Data System (ADS)

Khalaf, E. A.; Obeid, M. A.

2013-09-01

This paper presents a stratigraphic and sedimentary study of Neoproterozoic successions of the South Sinai, at the northernmost segment of the Arabian-Nubian Shield (ANS), including the Kid complex. This complex is composed predominantly of thick volcano-sedimentary successions representing different depositional and tectonic environments, followed by four deformational phases including folding and brittle faults (D1-D4). The whole Kid area is divisible from north to south into the lower, middle, and upper rock sequences. The higher metamorphic grade and extensive deformational styles of the lower sequence distinguishes them from the middle and upper sequences. Principal lithofacies in the lower sequence include thrust-imbricated tectonic slice of metasediments and metavolcanics, whereas the middle and upper sequences are made up of clastic sediments, intermediate-felsic lavas, volcaniclastics, and dike swarms. Two distinct Paleo- depositional environments are observed: deep-marine and alluvial fan regime. The former occurred mainly during the lower sequence, whereas the latter developed during the other two sequences. These alternations of depositional conditions in the volcano-sedimentary deposits suggest that the Kid area may have formed under a transitional climate regime fluctuating gradually from warm and dry to warm and humid conditions. Geochemical and petrographical data, in conjunction with field relationships, suggest that the investigated volcano-sedimentary rocks were built from detritus derived from a wide range of sources, ranging from Paleoproterozoic to Neoproterozoic continental crust. Deposition within the ancient Kid basin reflects a complete basin cycle from rifting and passive margin development, to intra-arc and foreland basin development and, finally, basin closure. The early phase of basin evolution is similar to various basins in the Taupo volcanics, whereas the later phases are similar to the Cordilleran-type foreland basin. The progressive change in lithofacies from marine intra-arc basin to continental molasses foreland basin and from compression to extension setting respectively, imply that the source area became peneplained, where the Kid basin became stabilized as sedimentation progressed following uplift. The scenario proposed of the study area supports the role of volcanic and tectonic events in architecting the facies and stratigraphic development.

Sedimentary Environment and Climate Evolution at the Northern Continental Margin of the South China Sea During the Last Glacial Cycle and Holocene

NASA Astrophysics Data System (ADS)

Tomczak, M.; Kaiser, J.; Borowka, R. K.; Chen, H.; Zhang, J.; Harff, J.; Qiu, Y.; Witkowski, A.

2014-12-01

Climate, oceanographic and sea level history during last glacial cycle (LGC) and Holocene at the NW continental margin of the South China Sea (SCS) are investigated within the SECEB project. For that purpose two sediment cores (HDQ2 & 83PC) and single-channel seismic sections were selected to serve as a proxy data source for paleoceanographic and paleoclimatic reconstructions. The sedimentary facies is interpreted by multi-proxy approaches considering micropaleontological, sedimentological and geochemical analyses. According to 14C and OSL datings, sediments of shallow water drill core HDQ2 (88.3 m) cover a time span of ca. 115 kyr BP. Seismic images of the sampling site show a series of reflectors which can be correlated with coarse layers of core HDQ2. These layers are interpreted as transgression / regression horizons. Due to the age model it is possible to correlate these horizons with the general sea level dynamics within the SCS as it is displayed in relative sea level excursions for the MIS 5 to 2 from the Sunda Shelf (Hanebuth et al. 2011). Core 83PC (8.6 m) retrieved from the continental slope provide constant record and calm environment. Therefore, this core is used as a source for data proxy for environmental reconstructions. According to δ18O and paleomagnetic analysis, a good age model which indicate age of this core to ca. 110 kyr BP was elaborated and help correlate the paleoenvironmental data with core HDQ2. Alkenones, δ18O, the Mg/Ca ratio, and microfossil proxies serve for paleo-SST curves and monsoon variability reconstructions. δ15N and δ13C indicate nutrient supply to the marine environment. Diatomological analysis outlines the environmental evolution and interrelations between their parameters during the LGC. Interpretation of seismic profiling allowed identification of submarine paleo-delta. It's anticipated that deposited sediments descent from the Hainan Island and allow correlation of the source and sink area.Hanebuth, T.J.J, Voris, H.K., Yokoyama, Y., Saito, Y., Okuno, J., 2011. Formation and fate of sedimentary depocentres on Southeast Asia's Sunda Shelf over the past sea-level cycle and biogeographic implications. Earth-Science Reviews 104, p. 92-110The project was funded by the Polish National Science Centre allocated on the basis of the decision no. DEC-2011/01/N/ST10/07708

Storm deposits as graves in Early Life: the Fezouata Lagerstätte case (Lower Ordovician, Morocco)

NASA Astrophysics Data System (ADS)

Vaucher, Romain; Pittet, Bernard; Hormière, Hélène; Martin, Emmanuel L. O.; Lefebvre, Bertrand

2016-04-01

The Fezouata Shale (Early Ordovician, Morocco) is renowned in the palaeontological community for its Konservat-Lagerstätte (Tremadocian in age) that yielded thousands of exceptionally well-preserved fossils (EPF) from the Great Ordovician Biodiversification Event. Lower Ordovician deposits in the central Anti-Atlas Mountain (Zagora area) are expressed by the Fezouata Shale and the Zini Formation. They consist in ca. 900m of siltstones and sandstones deposited in an epicontinental sea at the periphery of the Gondwanaland. Sedimentologic field analysis and sequence analysis were achieved on ten stratigraphic sections in order to constrain the palaeoenvironmental context of the Fezouata Biota and to predict the location (geographically and stratigraphically) of new Lagerstätten. Sedimentary structures (cm- to m-scale symmetrical ripples) and geometries (lobe, lobe-channel) point to storm dominance on the sedimentation but peculiar sedimentary features suggest a tide modulation. Thus, a wave-dominated tide-modulated model of deposition recording proximal offshore to shoreface environments for the Fezouata Shale and shoreface to foreshore environments for the overlying Zini Fm is proposed. Layers yielding EPF are argillaceous siltstones (with wave ripples of cm-scale wavelength) always overlain by fine-grained sandstones (distal storm deposits, few cm-thick, several m-long, with cm- to dm-scale hummocky cross-stratifications). Fast burying by storm deposits appear to be of prime importance to initiate the exceptional preservation of the soft tissues of animals in the fossil record. According to the model of deposition it correspond to environments close to the storm weather wave base. Lower Ordovician succession was deposited during a 2nd order cycle, although 3rd and 4th order cycles were also identified. Encoding these different orders of sea level fluctuations giving a value of "1" for the deepest part of sequences (for each order) and a value of "0" for the shallowest, a reconstruction of the sea level fluctuation is then proposed. This reconstruction clearly highlights the stratigraphic position of the today discovered Lagerstätte. It also suggests that a second, younger (Floian in age) stratigraphic interval has very comparable sedimentary conditions in terms of facies and sea level, and has the potential for being a new Lagerstätte in the Fezouata Shale.

Process regime, salinity, morphological, and sedimentary trends along the fluvial to marine transition zone of the mixed-energy Mekong River delta, Vietnam

NASA Astrophysics Data System (ADS)

Gugliotta, Marcello; Saito, Yoshiki; Nguyen, Van Lap; Ta, Thi Kim Oanh; Nakashima, Rei; Tamura, Toru; Uehara, Katsuto; Katsuki, Kota; Yamamoto, Seiichiro

2017-09-01

The fluvial to marine transition zone (FMTZ) is the area of coastal rivers in which sedimentation is controlled by the interaction of fluvial and marine processes. This study examines the FMTZ of the Mekong River delta, along a total channel length of 660 km. Methods consist of collection and analysis of channel bed sediment samples, measurements of channel morphological parameters, and recognition of mangrove, molluscan, and diatom species. The process regime, salinity, morphological, and sedimentary trends recognized were used to define two main tracts for this FMTZ: an upstream, fluvial-dominated tract and a downstream, tide-dominated tract. In more detail, they allow the identification of four subzones, from upstream to downstream: 1) fluvial-dominated, tide-affected; 2) fluvial-dominated, tide-influenced; 3) tide-dominated, fluvial-influenced; and 4) tide-dominated, fluvial-affected. Tide-induced water-level changes affect the entire study area and extend into Cambodia. Measured salinity intrusion extends 15 km upstream of the river mouth during wet season, and 50 km during dry season. Brackish water species of mangroves, mollusks, and diatoms, however, occur landward of these limits, suggesting that highly diluted brackish water may reach 160 km upstream of the river mouth during the dry season. In the fluvial-dominated tract, channels are sinuous and show a seaward-deepening trend, whereas width is relatively constant. In the tide-dominated tract, channels are straight, and show seaward-widening and seaward-shallowing trends. Natural levees are present in the fluvial-dominated, tide-affected subzone, but are replaced by mangroves elsewhere along the FMTZ. In the fluvial-dominated tract, mud content is low, sand grain size fines seaward, and gravelly sand and sand are the dominant facies. In the tide-dominated tract, mud content is high, sand grain size is constant, recycled sand is common, and tidal rhythmites are the dominant facies. Mud pebbles are common in sediments throughout a large part of the FMTZ. These trends characterizing the FMTZ of the Mekong River delta seem to be present in other systems and likely represent a general FMTZ pattern. Nonetheless, minor differences may be observed between different types of systems, or because of differences in local conditions. The comprehensive description of trends and their mutual relationships along the FMTZ presented herein provides critical information that can form the basis of a general conceptual model and can help to better understand these complex zones.

Constraints on the tectonics of the Mule Mountains Thrust System, southeast California and southwest Arizona

NASA Astrophysics Data System (ADS)

Tosdal, Richard M.

1990-11-01

The Mule Mountains thrust system crops out discontinuously over a 100-km-strike length in the Blythe-Quartzsite region of southeast California and southwest Arizona. Along the thrust system, middle and upper crustal metamorphic and plutonic rocks of Proterozoic and Mesozoic age are thrust north-northeastward (015° to 035°) over a lower plate metamorphic terrane that formed part of the Proterozoic North American craton, its Paleozoic sedimentary rock cover, overlying Mesozoic volcanic and sedimentary rocks, and the intruding Jurassic and Cretaceous granitic rocks. Stratigraphic, petrologic, and Pb isotopic ties for Jurassic granitoids and for Jurassic(?) and Cretaceous sedimentary rocks across the various parts of the thrust system indicate that related crustal blocks are superposed and preclude it from having large displacements. The thick-skinned thrust system is structurally symmetrical along its length with a central domain of synmetamorphic thrust faults that are flanked by western and eastern domains where lower plate synclines underlie the thrusts. Deformation occurred under low greenschist facies metamorphic conditions in the upper crust. Movement along the thrust system was probably limited to no more than a few tens of kilometers and occurred between 79±2 Ma and 70±4 Ma. The superposition of related rocks and the geometry of the thrust system preclude it from being a major tectonic boundary of post-Middle Jurassic age, as has been previously proposed. Rather, the thrust system forms the southern boundary of the narrow zone of Cretaceous intracratonic deformation, and it is one of the last tectonic events in the zone prior to regional cooling.

The Upstream and Downstream impact of Milankovitch cycles in continental nonmarine sedimentary records

NASA Astrophysics Data System (ADS)

Valero, Luis; Garcés, Miguel; Huerta, Pedro; Cabrera, Lluís

2016-04-01

Discerning the effects of climate in the stratigraphic record is crucial for the comprehension of past climate changes. The signature of climate in sedimentary sequences is often assessed by the identification of Milankovitch cycles, as they can be recognized due to their (quasi) periodic behaviour. The integration of diverse stratigraphic disciplines is required in order to understand the different processes involved in the expression of the orbital cycles in the sedimentary records. New advances in Stratigraphy disclose the different variables that affect the sedimentation along the sediment routing systems. These variables can be summarized as the relationship between accommodation and sediment supply (AS/SS), because they account for the shifts of the total mass balance of a basin. Based in these indicators we propose a synthetic model for the understanding of the expression of climate in continental basins. Sedimentation in internally drained lake basins is particularly sensitive to net precipitation/evaporation variations. Rapid base level oscillations modify the AS/SS ratio sufficiently as to mask possible sediment flux variations associated to the changing discharge. On the other hand, basins lacking a central lacustrine system do not experience climatically-driven accommodation changes, and thus are more sensitive to archive sediment pulses. Small basins lacking carbonate facies are the ideal candidates to archive the impact of orbital forcing in the landscapes, as their small-scale sediment transfer systems are unable to buffer the upstream signal. Sedimentation models that include the relationship between accommodation and sediment supply, the effects of density and type of vegetation, and its coupled response with climate are needed to enhance their reliability.

Petroleum geology of Amu-Dar'ya province of Soviet Central Asia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clarke J.W.

1986-05-01

The Amu-Dar'ya oil and gas province extends over an area of 360,000 km/sup 2/ in central and eastern Turkmenia and western Uzbekistan in southern Soviet Central Asia. The province coincides with the eastern half of the Turan platform. A Mesozoic-Cenozoic sedimentary cover, 2-7 km thick, rests on a folded paleozoic basement. An Upper Jurassic salt unit divides the sedimentary section into subsalt and suprasalt parts. The structure of the sedimentary cover developed by vertical movements during the Mesozoic and Cenozoic, most of it during the late Tertiary in response to Alpine tectonism. Consequently, much of the trap formation and fillingmore » is late in geologic time and is apparently in progress at present. The province is gas prone; only in the Bukhara area on the east is there significant oil. Five plays are recognized. The Lower to Middle Jurassic play consists of alternating clays, sandstone, and siltstone. Thickness is 100-400 m. The Upper Jurassic play consists of Callovian-Oxfordian carbonate deposits, which are up to 500 m thick. The seal is Kimmeridgian-Tithonian salt. The carbonate deposits of this play are commonly a reef facies. The Lower Cretaceous play consists largely of alternating sandstone, clays, and siltstones. The seal is a clay unit of late Aptian and Albian age, which also separates this play from the overlying Albian-Cenomanian play. The Albian-Cenomanian play has sandstone and siltstone reservoirs, and the seal is a Turonian clay unit. The Paleogene play is prospective in the northeast part of the study area in the so-called Bukhara clastic beds.« less

Facies analysis of tuffaceous volcaniclastics and felsic volcanics of Tadpatri Formation, Cuddapah basin, Andhra Pradesh, India

NASA Astrophysics Data System (ADS)

Goswami, Sukanta; Dey, Sukanta

2018-05-01

The felsic volcanics, tuff and volcaniclastic rocks within the Tadpatri Formation of Proterozoic Cuddapah basin are not extensively studied so far. It is necessary to evaluate the extrusive environment of felsic lavas with associated ash fall tuffs and define the resedimented volcaniclastic components. The spatial and temporal bimodal association were addressed, but geochemical and petrographic studies of mafic volcanics are paid more attention so far. The limited exposures of eroded felsic volcanics and tuffaceous volcaniclastic components in this terrain are highly altered and that is the challenge of the present facies analysis. Based on field observation and mapping of different lithounits a number of facies are categorized. Unbiased lithogeochemical sampling have provided major and selective trace element data to characterize facies types. Thin-section studies are also carried out to interpret different syn- and post- volcanic features. The facies analysis are used to prepare a representative facies model to visualize the entire phenomenon with reference to the basin evolution. Different devitrification features and other textural as well as structural attributes typical of flow, surge and ash fall deposits are manifested in the middle, lower and upper stratigraphic levels. Spatial and temporal correlation of lithologs are also supportive of bimodal volcanism. Felsic and mafic lavas are interpreted to have erupted through the N-S trending rift-associated fissures due to lithospheric stretching during late Palaeoproterozoic. It is also established from the facies model that the volcaniclastics were deposited in the deeper part of the basin in the east. The rifting and associated pressure release must have provided suitable condition of decompression melting at shallow depth with high geothermal gradient and this partial melting of mantle derived material at lower crust must have produced mafic magmas. Such upwelling into cold crust also caused partial heat transfer and associated melting of the surrounding shallow crustal rocks to generate felsic magmas.

Analysis on the overpressure characterization with respect to depositional environment facies: Case Study in Miri Area, Baram Delta

NASA Astrophysics Data System (ADS)

Mhd Hanapiah, N.; Yusoff, W. I. Wan; Zakariah, M. N. A.

2017-10-01

Overpressure studies in oil and gas exploration and production are carried out in order to mitigate any losses that could happen while drilling. These concerns can be addressed by enhancing the understanding of overpressure characterization in the fields. This research emphasizes in determining the pore pressure trend in Miri area to assist pore pressure prediction for future hydrocarbon exploration and production. Generally, pore pressure trends are related to mechanisms that contribute to the overpressure generation. In the region predominant overpressure are disequilibrium compaction within the prodelta shales meanwhile in outer shelf overpressure generation controlled by fluid expansion in deltaic sequence of inner shelf area. The objective of this research is to analyze the pore pressure profile of wells for determining vertical trends of pore pressure for various depositional environment facies of Miri area. Integration of rock physics and pore pressure analysis and relating the trends to environment depositional environment facies within shale underlying sand interval. Analysis done shows that overpressure top is characterize by depositional environment facies within shale underlying sand interval.

Study of southern CHAONAN sag lower continental slope basin deposition character in Northern South China Sea

NASA Astrophysics Data System (ADS)

Tang, Y.

2009-12-01

Northern South China Sea Margin locates in Eurasian plate,Indian-Australia plate,Pacific Plates.The South China Sea had underwent a complicated tectonic evolution in Cenozoic.During rifting,the continental shelf and slope forms a series of Cenozoic sedimentary basins,including Qiongdongnan basin,Pearl River Mouth basin,Taixinan basin.These basins fill in thick Cenozoic fluviolacustrine facies,transitional facies,marine facies,abyssal facies sediment,recording the evolution history of South China Sea Margin rifting and ocean basin extending.The studies of tectonics and deposition of depression in the Southern Chaonan Sag of lower continental slope in the Norther South China Sea were dealt with,based on the sequence stratigraphy and depositional facies interpretation of seismic profiles acquired by cruises of“China and Germany Joint Study on Marine Geosciences in the South China Sea”and“The formation,evolution and key issues of important resources in China marginal sea",and combining with ODP 1148 cole and LW33-1-1 well.The free-air gravity anomaly of the break up of the continental and ocean appears comparatively low negative anomaly traps which extended in EW,it is the reflection of passive margin gravitational effect.Bouguer gravity anomaly is comparatively low which is gradient zone extended NE-SW.Magnetic anomaly lies in Magnetic Quiet Zone at the Northern Continental Margin of the South China Sea.The Cenozoic sediments of lower continental slope in Southern Chaonan Sag can be divided into five stratum interface:SB5.5,SB10.5,SB16.5,SB23.8 and Hg,their ages are of Pliocene-Quaternary,late Miocene,middle Miocene,early Miocene,paleogene.The tectonic evolution of low continental slope depressions can be divided into rifting,rifting-depression transitional and depression stages,while their depositional environments change from river to shallow marine and abyssa1,which results in different topography in different stages.The topographic evolvement in the study area includes three stages,that is Eogene,middle stage of lately Oligocene to early Miocene and middle Miocene to Present.Result shows that there are a good association of petroleum source rocks,reservoir rocks and seal rocks and structural traps in the Cenozoic and Mesozoic strata,as well as good conditions for the generation-migration-accumulation-preservation of petroleum in the lower continatal slope of Southern Chaoshan Sag.So the region has good petroleum prospect. Key words:Northern South China Sea;Chaoshan Sag; lower continental slope; deposition.

Lithostratigraphy and microfacies analyses of the Lateglacial and early Holocene sediment record from Lake Haemelsee (Germany)

NASA Astrophysics Data System (ADS)

Haliuc, Aritina; Brauer, Achim; Dulski, Peter; Engels, Stefan; Lane, Christine

2015-04-01

Annually laminated sediments are unique continental archives holding essential paleoenvironmental and paleoclimatic information providing the opportunity (i) to evaluate the climate variability at inter-annual to decadal scale and (ii) to construct independent and reliable chronologies. Lake Haemelsee in northern Germany (19.5 m a.s.l) is a key site for tracing high-resolution climatic and environmental evolution in W Europe because of its partly varved sediments. Here, we apply lithostratigraphical, geochemical and micro-facies analyses for the bottom sediments (~1700 to 1300 cm sediment depth) in order to investigate the driving mechanisms, timing and amplitude of Lateglacial abrupt climate changes to the onset of the Holocene warming. Detailed investigation includes micro-facies analyses on petrographic thin sections combined with high-resolution µ-XRF element scanning on both fresh sediment core halves (200 µm resolution) and impregnated sediment blocks (50µm resolution). Based on these analyses, the sediment composite profile (378 cm) has been divided in ten lithozones, each exhibiting different sedimentation modes in response to regional and local climatic and environmental changes. Micro-facies analyses revealed that sediments consist of organic matter, siderite, calcite, clay/silt and sand. The basal sediments consist of glacio-fluvial material. Fine laminations are best preserved in lithozone 5 (1522-1573 cm), where minima in element proxies for detrital sediments (Ti, K, Si) and maxima in Fe and Mn indicate the prevalence of anoxic meromictic conditions. Three different varve facies types were distinguished: i) the clastic-organic varves are specific for the intervals 1571-1573 cm and 1536-1541 cm; ii) calcite/siderite-organic varves appear between 1568-1571 and 1541-1545 cm; iii) the siderite-organic varves are characteristic for the middle of the lithozone 5 spanning from 1545-1568 cm. These changes in varve facies reflect the complex answer of sedimentary conditions to climatic changes during Allerød and Allerød/Younger Dryas transition. An increased detrital sediment flux characterizes lithozone 6 and, most probably reflects the Younger Dryas cold interval. This interpretation is supported by the late Allerød Laacher See Tephra, an important chronostratigraphic marker horizon to link the floating 625 varve year chronology for the Allerød interstadial to an absolute time scale. Also, the preliminary pollen data provided the biostratigraphical information for establishing the lateglacial boundaries. Poorly preserved organic laminas are characteristic for lithozone 7 (1445-1474 cm). Our preliminary results demonstrate that the lake system responded sensitively to rapid and short-term climatic changes and these responses are well-expressed in sedimentological and geochemical variability.

Integrating bio-, chemo- and sequence stratigraphy of the Late Ordovician, Early Katian: A connection between onshore and offshore facies using carbon isotope analysis: Kentucky, Ohio, USA

NASA Astrophysics Data System (ADS)

Young, Allison; Brett, Carlton; McLaughlin, Patrick

2017-04-01

A common problem in stratigraphic correlation is the difficulty of bridging shallow water shelf carbonates and down ramp shale-rich facies. This issue is well exemplified by the Upper Ordovician (lower Katian) Lexington Limestone of Kentucky, USA and adjacent dark shale facies in the deeper water Sebree Trough, an elongate, narrow bathymetric low abruptly north of the outcrop belt in the Ohio subsurface. Chronostratigraphic schemes for this interval have been proposed on the basis of conodont and graptolite biostratigraphy, mapping of event beds, and sequence stratigraphy through facies analysis. The relation of the siliciclastic rich offshore records of the "Point Pleasant-Utica" interval, well known to drillers because of its oil and gas potential, with the up-ramp shallow water carbonate dominated equivalents of the Lexington Formation is complicated by convoluted nomenclature, a major, abrupt change in facies, and disparity in the availability and completeness of records. Current genetic models of organic rich shale intervals, such as the Point Pleasant-Utica interval, are still lacking in detail, and will greatly benefit from detailed correlation with shallow water settings where more is understood about paleoclimatic conditions. In order to understand the development and evolution of this Late Ordovician Laurentian basin, it is important to understand the age relationships of depositional processes occurring at a range of depths, particularly in the less well studied epeiric sea setting of the "Point Pleasant-Utica" interval of Ohio and partial lateral equivalent, Lexington Formation of central Kentucky. The outcrop area of central Kentucky, exposed by the later uplift of the Cincinnati Arch, hosts numerous world-class exposures of the Lexington Formation, nearly all of which are representative of the highly fossiliferous, shallow-water marine platform carbonates. These successions display well differentiated depositional sequences, with sharp facies offsets, and mineralized surfaces. They also contain well studied fossil assemblages and event beds, which at the scale of an outcrop, allow for detailed paleoenvironmental interpretation. The offshore record of this interval, known almost exclusively from a few drill cores, displays an abrupt transition to distal, siliciclastic dominated facies, recording a more dysoxic and organic rich interval. Internal correlation of these shales has relied mostly on limited graptolite biostratigraphic and geochemical analysis. Here we seek to establish age relationships across a major facies transition between these two interrelated paleoenvironmental settings using high resolution whole rock carbon isotope analysis to integrate new and previous work on lithostratigraphy, biostratigraphy, and sequence stratigraphy of a series of cores and outcrops. Results to date demonstrate the persistence of carbon isotopic patterns (including the globally recognized GICE positive carbon isotopic excursion) permitting extension of correlation into basinal facies where tracking of stratigraphic sequences becomes difficult. A complicated relationship across the region is emerging involving both rapid facies transitions and submarine erosional cutout of units toward the center of the Sebree Trough. This study demonstrates the utility of an integrated stratigraphic approach for establishing high resolution regional correlations allowing for interpretations across a major facies transitions.

Paleogeography and sedimentology of Upper Cretaceous turbidites, San Diego, California.

USGS Publications Warehouse

Nilsen, T.H.; Abbott, P.L.

1981-01-01

Upper Cretaceous (Campanian and Maestrichtian) marine strata of the Rosario Group in the San Diego area include the Point Loma Formation and overlying Cabrillo Formation. Thes units contain 6 facies associations which define a deep-sea fan deposited by westward-flowing sediment gravity flows that transported sediments derived chiefly from batholithic and pre-batholithic metamorphic rocks of the Peninsular Ranges. The sedimentary basin initially deepened abruptly. The fan then prograded westward into the basin, with a retrogradational phase recorded in the uppermost part of the sequence. The fan was deposited along the eastern edge of a forearc basin similar to that of the Great Valley sequence in northern California. The western part of the fan appears to have been truncated by late Cenozoic strike-slip faulting.-from Authors

Sedimentary architecture and depositional environment of Kudat Formation, Sabah, Malaysia

NASA Astrophysics Data System (ADS)

Ghaheri, Samira; Suhaili, Mohd; Sapari, Nasiman; Momeni, Mohammadsadegh

2017-12-01

Kudat Formation originated from deep marine environment. Three lithofacies association of deep marine turbidity channel was discovered in three Members of the Kudat Formation in Kudat Peninsula, Sabah, Malaysia. Turbidite and deep marine architecture elements was described based on detailed sedimentological studies. Four architecture elements were identified based on each facies association and their lithology properties and character: inner external levee that was formed by turbidity flows spill out from their confinement of channel belt; Lobes sheet that was formed during downslope debris flows associated with levee; Channel fill which sediments deposited from high to low density currents with different value of sediment concentration; and overbank terrace which was formed by rapid suspension sedimentation. The depositional environment of Kudat Formation is shelf to deep marine fan.

Late Cretaceous-Cenozoic subduction-collision history of the Southern Neotethys: new evidence from the Çağlayancerit area, SE Turkey

NASA Astrophysics Data System (ADS)

Akıncı, Ahmet Can; Robertson, Alastair H. F.; Ünlügenç, Ulvi Can

2016-01-01

Evidence of the subduction-collision history of the S Neotethys is well exposed in the frontal part of the SE Anatolian thrust belt and the adjacent Arabian continental margin. The foreland succession in the study area begins with Eocene shelf carbonates, ranging from shallow marine to deeper marine, without sedimentary input from the Tauride continent to the north. After a regional hiatus (Oligocene), sedimentation resumed during the Early Miocene with terrigenous gravity-flow deposition in the north (Lice Formation) and shallow-marine carbonates further south. Clastic detritus was derived from the Tauride continent and oceanic accretionary material. The base of the overriding Tauride allochthon comprises ophiolite-derived debris flows, ophiolite-related mélange and dismembered ophiolitic rocks. Above this, the regional-scale Bulgurkaya sedimentary mélange (an olistostrome) includes blocks and dismembered thrust sheets of metamorphic rocks, limestone and sandstone, which include Late Cretaceous and Eocene foraminifera. The matrix is mainly strongly deformed Eocene-Oligocene mudrocks, hemipelagic marl and sandstone turbidites. The thrust stack is topped by a regionally extensive thrust sheet (Malatya metamorphic unit), which includes greenschist facies marble, calcschist, schist and phyllite, representing Tauride continental crust. Beginning during the Late Mesozoic, the S Neotethys subducted northwards beneath a backstop represented by the Tauride microcontinent (Malatya metamorphic unit). Ophiolites formed within the S Neotethys and accreted to the Tauride active margin. Large-scale sedimentary mélange developed along the Tauride active margin during Eocene-Oligocene. On the Arabian margin, a sedimentary hiatus and tilting (Oligocene) is interpreted to record initial continental collision. The Early Miocene terrigenous gravity flows represent a collision-related flexural foreland basin. Southward overthrusting of the Tauride allochthon took place during Early-Middle Miocene. Associated regional uplift triggered large-scale alluvial deposition. The foreland folded and faulted in response to suture zone tightening (Late Miocene). Left-lateral strike slip characterised the Plio-Pleistocene.

Fluvial channel-belts, floodbasins, and aeolian ergs in the Precambrian Meall Dearg Formation (Torridonian of Scotland): Inferring climate regimes from pre-vegetation clastic rock records

NASA Astrophysics Data System (ADS)

Lebeau, Lorraine E.; Ielpi, Alessandro

2017-07-01

The interpretation of climate regimes from facies analysis of Precambrian clastic rocks has been challenging thus far, hindering full reconstructions of landscape dynamics in pre-vegetation environments. Yet, comparisons between different and co-active sedimentary realms, including fluvial-channelised, floodplain, and aeolian hold the potential to shed further light on this thematic. This research discusses a fluvial-aeolian record from the 1.2 Ga Meall Dearg Formation, part of the classic Torridonian succession of Scotland. Tentatively considered to date as a braided-fluvial deposit, this unit is here reappraised as the record of fluvial channel-belts, floodbasins, and aeolian ergs. Fluvial deposits with abundant transitional- to upper-flow regime structures (mostly cross-beds with tangential sets and plane/antidunal beds) and simple, low-relief sediment bars indicate a low-sinuosity, ephemeral style. Floodbasin deposits consist of plane and cross-beds ubiquitously bounded by symmetrical ripples, and rare sediment bars related to the progradation of splay complexes in temporary flooded depressions. Aeolian deposits occur nearby basement topography, and are dominated by large-scale, pin-stripe laminated cross-beds, indicative of intermountain ergs. Neither ephemeral-fluvial nor intermountain aeolian systems can be considered as reliable indicators of local climate, since their sedimentary style is respectively controlled by catchment size and shape, and basin topography relative to groundwater tables. Contrarily, the occurrence of purely clastic - rather than carbonate or evaporitic - floodplain strata can be more confidently related to humid regimes. In brief, this study provides new insight into an overlooked portion of the Torridonian succession of Scotland, and discusses climate inferences for Precambrian clastic terrestrial rocks.

The lacustrine record of the Dan-C2 hyperthermal event of the Boltysh Impact Crater, Ukraine

NASA Astrophysics Data System (ADS)

Ebinghaus, Alena; Jolley, David W.

2015-04-01

Vegetation response to rapid climate change in the geological record is a fundamental element in our understanding of ancient environments; however, the relationships between climate change, plant ecosystems and geological processes are still not fully understood. The filling of the K/Pg Boltysh meteorite crater, Ukraine, comprise a complete terrestrial sedimentological, palynological and δ13C record of the negative carbon isotope excursion of the early Danian hyperthermal episode. The meteorite impact formed a crater of c. 24 km in diameter at c. 65.2 Ma, which was filled with more than 500 m of organic- and fossil-rich claystones, siltstones and marls, interbedded with sandstones and less frequently gravelly sandstones. The sedimentary succession indicates a deep lake setting that was characterised by fluvial input of reworked basement material via a marginal delta system. Palynological investigations indicate a post-impact early- to mid-successional flora followed by a barren zone which coincides with the age of the Chicxulub impact and therefore argues for a series of impact events at the K/Pg boundary. This barren zone was succeeded by a fern spike marking an initial plant re-colonization. The following palynoflora suggests moisture availability oscillations (MAOs) reflecting 41 k.y. obliquity cycles, which can be correlated with lithological fluctuations during lake evolution. The aim is to conduct a detailed, complete facies analysis, and to correlate lake evolutionary aspects with climatic oscillations and vegetation change within the catchment area. This study will be compared with records of similar hyperthermal events, such as the Paleocene-Eocene Thermal Maximum (PETM) in the Western Interior in North America. This integrated approach will help to better understand the controlling factors of global warming events, and their effects on ancient sedimentary environments and ecosystems.

Integrated Modeling and Carbonate Reservoir Analysis, Upper Jurassic Smackover Formation, Fishpond Field, Southwest Alabama

NASA Astrophysics Data System (ADS)

Owen, Alexander Emory

This field case study focuses on Upper Jurassic (Oxfordian) Smackover hydrocarbon reservoir characterization, modeling and evaluation at Fishpond Field, Escambia County, Alabama, eastern Gulf Coastal Plain of North America. The field is located in the Conecuh Embayment area, south of the Little Cedar Creek Field in Conecuh County and east of Appleton Field in Escambia County. In the Conecuh Embayment, Smackover microbial buildups commonly developed on Paleozoic basement paleohighs in an inner to middle carbonate ramp setting. The microbial and associated facies identified in Fishpond Field are: (F-1) peloidal wackestone, (F-2) peloidal packstone, (F-3) peloidal grainstone, (F-4) peloidal grainstone/packstone, (F-5) microbially-influenced wackestone, (F-6) microbially-influenced packstone, (F-7) microbial boundstone, (F-8) oolitic grainstone, (F-9) shale, and (F-10) dolomitized wackestone/packstone. The Smackover section consists of an alternation of carbonate facies, including F-1 through F-8. The repetitive vertical trend in facies indicates variations in depositional conditions in the area as a result of changes in water depth, energy conditions, salinity, and/or water chemistry due to temporal variations or changes in relative sea level. Accommodation for sediment accumulation also was produced by a change in base level due to differential movement of basement rocks as a result of faulting and/or subsidence due to burial compaction and extension. These changes in base level contributed to the development of a microbial buildup that ranges between 130-165 ft in thickness. The Fishpond Field carbonate reservoir includes a lower microbial buildup interval, a middle grainstone/packstone interval and an upper microbial buildup interval. The Fishpond Field has sedimentary and petroleum system characteristics similar to the neighboring Appleton and Little Cedar Creek Fields, but also has distinct differences from these Smackover fields. The characteristics of the petroleum trap and reservoir at Fishpond Field requires modification of the exploration strategy presently in use to identify Smackover reservoirs productive of hydrocarbons in the Conecuh Embayment area. The complexity of the geologic history of the petroleum trap and reservoir development at Fishpond Field distinguishes this field from the Appleton basement paleohigh and related microbial buildup and the Little Cedar Creek stratigraphic trap and associated inner ramp microbial buildups.

The Mintom Formation (new): Sedimentology and geochemistry of a Neoproterozoic, Paralic succession in south-east Cameroon

NASA Astrophysics Data System (ADS)

Caron, V.; Ekomane, E.; Mahieux, G.; Moussango, P.; Ndjeng, E.

2010-06-01

This paper presents a lithologic and stratigraphic description of the Neoproterozoic (ante- or syn- Pan-African orogeny) Mintom Formation (new) of southeastern Cameroon, and provides a new facies and geochemical analysis of the sedimentary succession, formerly referred to as the upper Dja series. The Mintom Formation can be subdivided from base to top into four members that record a general increase in carbonate content. The members (all new) from lower to upper are: Kol Member (diamictite and pelite), Metou Member (dolostone), Momibolé Member (calcareous pelite), and Atog Adjap Member (limestone). Although the lithostratigraphic architecture looks very similar to that of well-documented syn- and post-glacial Neoproterozoic deposits, physical evidence of glacial influence is absent. By contrast with other Central African Neoproterozoic carbonates deposited in ramp settings, the succession does not contain open marine facies. Limestones consist of monotonous subhedral microsparitic calcite mosaics and display occasional microbial laminae. These observations force reevaluation of both previous paleoenvironmental interpretations of the deposits and their comparison with neighboring Ediacaran carbonates. We assume that the graded basal succession from diamictite to laminated pelitic facies is compatible with emplacement of mass flow deposits in toe-of-slope setting during regional uplift. Interpretation of the overlying Métou dolostone is uncertain though sedimentological and geochemical properties point to a likely quiet depositional setting. The upper part of the Formation, including the Momibolé and Atog Adjap Members, is conspicuously laminated, in places rhythmically and ripple-bedded, suggesting shallow subaqueous and calm depositional conditions only interrupted by occasional slumps indicative of a locally steepened bottom topography. Evaporitic fabrics and fenestral pores further indicate shallow water, possibly peritidal, environmental conditions. In spite of indications of shale and post-depositional contamination, rare earth elements (REE) plus yttrium (Y) patterns obtained from carbonate samples point to a non-marine origin for the Atog Adjap limestone, but instead deposition in lacustrine or lagoonal settings under freshwater influence. This interpretation suggests that the Mintom Formation formed in a small-scale palaeodepression, isolated from the open marine environment, where confined lagoonal or lacustrine sedimentation developed. The final Neoproterozoic evolution of the Mintom Formation was dominated by erosional features, including striations and stair-cased groove structures reported for the first time here, and revealing the passage of glaciers of likely Ediacaran age.

Sulfur speciation and isotope analysis of the 2.7 Ga shallow- and deep-facies black shales from Pilbara, Western Australia

NASA Astrophysics Data System (ADS)

Minami, H.; Yamaguchi, K. E.; Naraoka, H.

2014-12-01

It has been widely believed that Great Oxidation Event (GOE: Holland, 1994) occurred at ~2.4-2.2 Ga ago. However, some previous studies have found evidence for oxic ocean and atmosphere from earlier rock records (e.g., Hoashi et al., 2009). In order to explore if such oxic environment was local or global and if there was redox heterogeneity in a sedimentary basin before the inferred GOE, using the 2.7 Ga pyrite-bearing drillcore black shales (deep-facies WRL1 and shallow-facies RHDH2A drillcores) from Pilbara, Western Australia, we separately quantified abundance of S-bearing species (SAVS (acid-volatile sulfide), Spy (pyrite), SSO4 (sulfate), Sorg (organic-S), and S0 (elemental S) and Fe-bearing species (Fecarb, Feox, and Femag) by using sequential extraction methods. These samples were previously used by Brocks et al. (1999), Yamaguchi (2002), Yamaguchi et al. (2005), and Eigenbrode and Freeman (2006). The shallow samples have high S contents and are interpreted to have deposited in relatively anoxic environment, but most of deep samples with elevated Fe contents deposited in relatively oxic environment. The DOP values and δ34Spy values are relatively higher in shallow samples, suggesting active bacterial sulfate reduction in reducing environment created due to near-complete consumption of dissolved O2by decomposition of organic matter produced by photosynthesizers living in the surface ocean. All of these observations consistently suggest that the shallower part was anoxic and deeper part was oxic in the 2.7 Ga ocean. The surface ocean would have been oxygenated due to activity of oxygenic photosynthesis. Such redox stratification of the ocean, i.e., development of mid-depth (shallow) OMZ in an essentially oxic ocean, is typically seen in highly productive regions in the modern ocean. Modern-style oceanic redox structure could have existed as far back as 2.7 Ga ago, much earlier than the inferred GOE at ~2.4-2.2 Ga. Brocks et al. (1999) Science 285, 1033-1036; Eigenbrode & Freeman (2006) PNAS 103, 15759-15764; Hoashi et al. (2009) Nature Geosc. 2, 301-306; Holland (1994) Early Life on Earth, Columbia Univ. Press; Yamaguchi (2002) Ph.D. dissertation, Penn State Univ.; Yamaguchi et al. (2005) Chem. Geol. 218, 135- 169.

Lower Paleozoic Through Archean Detrital Zircon Ages From Metasedimentary Rocks of the Nome Group, Seward Peninsula, Alaska

NASA Astrophysics Data System (ADS)

Amato, J. M.; Miller, E. L.; Gehrels, G.

2003-12-01

Metamorphic rocks of Seward Peninsula have been divided into two groups based on their metamorphic grade and history: The Nome Group and the Kigluaik Group. Although it is sometime been assumed that the higher structural position of the Nome Group versus the Kigluaik Group indicates the Kigluaik Group is older, this relationship and the age of the protoliths of these rocks has never been well-established. The Nome Group includes (delete the) lower grade blueschist and greenschist facies rocks which are widespread across the Seward Peninsula (delete) Rock types include pelitic schist, more mafic chlorite-white mica-albite schist, marble, quartzite, and metabasite. An early metamorphic event (pre-120 Ma) occurred at high pressure and relatively low temperature, and is everywhere overprinted by younger deformation and greenschist facies Rare eclogite facies assemblages are preserved in metabasites, and garnet-glaucophane in some of the pelitic schists. The Kigluaik Group includes upper greenschist to granulite facies rocks that are exposed in the core of a gneiss dome. They record a younger event (~91 Ma) that occurred at higher temperatures and resulted in partial thermal overprinting of the Nome Group and upper greenschist to granulite facies assemblages forming in the Kigluaik Group. The Kigluaik Group and equivalent rocks in the Bendeleben and Darby Mountains represent at least in part similar protoliths to many of the units in the Nome Group (Till and Dumoulin, 1994). The boundary between the rocks of the Nome Group and those clearly affected by the second metamorphic event is placed arbitrarily at the "Biotite-in" isograd along the flanks of the gneiss dome. In order to assess the protolith ages and source rock ages for these units, detrital zircon ages were obtained from three samples from the Nome Group, with Kigluaik Group ages forthcoming. LA-MC-ICPMS U/Pb isotope analysis was used for dating. Two samples were collected from the western Kigluaik Mountains near Eldorado Creek and one further south along the Feather River. Each sample yielded 90-105 analyses and all uncertainties are 1 sigma. Chlorite schist MC-74 has a range of ages from the two youngest grains at 484 +/- 18 Ma and 510 +/- 7 Ma to 2984 +/- 2 Ma. Chlorite schist LMC-30 has a youngest grain at 521 +/- 2 Ma and an oldest grain of 2027 +/- 12. Quartz-mica schist LMC-58 also has a youngest grain at 521 +/- 2 Ma and an oldest grain of 2655 +/- 7 Ma. All three therefore have lower Paleozoic zircons, suggesting Lower Cambrian or younger depositional ages. Combining the data from all three rocks results in peaks on a cumulative probability plot at (in descending order of importance): 600 Ma, 683 Ma, 1593 Ma, 522 Ma, and 2985 Ma, with several smaller peaks between 774-1540 Ma and 1685-1960 Ma. Published ages from Nome Group orthogneisses are 680 Ma, suggesting the samples so far analyzed are likely in part sourced from local basement rocks that were eroded to provide ~680 Ma detrital zircons to sedimentary protoliths of part of the Nome Group.

Integrated multi-stratigraphic study of the Coll de Terrers late Permian-Early Triassic continental succession from the Catalan Pyrenees (NE Iberian Peninsula): A geologic reference record for equatorial Pangaea

NASA Astrophysics Data System (ADS)

Mujal, Eudald; Fortuny, Josep; Pérez-Cano, Jordi; Dinarès-Turell, Jaume; Ibáñez-Insa, Jordi; Oms, Oriol; Vila, Isabel; Bolet, Arnau; Anadón, Pere

2017-12-01

The most severe biotic crisis on Earth history occurred during the Permian-Triassic (PT) transition around 252 Ma. Whereas in the marine realm such extinction event is well-constrained, in terrestrial settings it is still poorly known, mainly due to the lack of suitable complete sections. This is utterly the case along the Western Tethys region, located at Pangaea's equator, where terrestrial successions are typically build-up of red beds often characterised by a significant erosive gap at the base of the Triassic strata. Henceforth, documenting potentially complete terrestrial successions along the PT transition becomes fundamental. Here, we document the exceptional Coll de Terrers area from the Catalan Pyrenees (NE Iberian Peninsula), for which a multidisciplinary research is conducted along the PT transition. The red-bed succession, located in a long E-W extended narrow rift system known as Pyrenean Basin, resulted from a continuous sedimentary deposition evolving from meandering (lower Upper Red Unit) to playa-lake/ephemeral lacustrine (upper Upper Red Unit) and again to meandering settings (Buntsandstein facies). Sedimentary continuity is suggested by preliminary cyclostratigraphic analysis that warrants further analysis. Our combined sedimentological, mineralogical and geochemical data infer a humid-semiarid-humid climatic trend across the studied succession. The uppermost Permian strata, deposited under an orbitally controlled monsoonal regime, yields a relatively diverse ichnoassemblage mainly composed of tetrapod footprints and arthropod trace fossils. Such fossils indicate appropriate life conditions and water presence in levels that also display desiccation structures. These levels alternate with barren intervals formed under dry conditions, being thus indicative of strong seasonality. All these features are correlated with those reported elsewhere in Gondwana and Laurasia, and suggest that the Permian-Triassic boundary might be recorded somewhere around the Buntsandstein base. Consequently, Coll de Terrers and the whole Catalan Pyrenees become key regions to investigate in detail the Permian extinction event and the Triassic ecosystems recovery.

Seismic stratigraphy and tomography in the outer shelf and slope of the Central Basin, Ross Sea, Antarctica

NASA Astrophysics Data System (ADS)

Kim, Sookwan; De Santis, Laura; Böhm, Gualtiero; Kuk Hong, Jong; Jin, Young Keun; Geletti, Riccardo; Wardell, Nigel; Petronio, Lorenzo; Colizza, Ester

2014-05-01

The Ross Sea, located between Victoria Land and Marie Byrd Land in Antarctica, is one of the main drainage of the Antarctic Ice Sheet (AIS). Reflection seismic data acquired by many countries during several decades have provided insights into the history of the Ross Sea and the AIS evolution. However the majority of the existing seismic data are concentrated in the shelf area, where hiatus formed by grounding ice sheet erosion multiple events prevent to reconstruct the entire sedimentary sequences depositional evolution. On the outer shelf and upper slope, the sedimentary sequences are relatively well preserved. The main purpose of this study is the investigation of the Cenozoic Antarctic Ice Sheet evolution through the seismic sequence analysis of the outer shelf and slope of the Central Basin, in the Ross Sea. The data used are the new multi-channel seismic data, KSL12, were acquired on the outer shelf and upper slope of the Central Bain in February 2013 by Korea Polar Research Institute. The reflection seismic data, previously collected by the Italian Antarctic Program (PNRA) and other data available from the Seismic Data Library System (SDLS) are also used for velocity tomography and seismic sequence mapping. The seismic data were processed by a conventional processing flow to produce the seismic profiles. Preliminary results show well-developed prograding wedges at the mouth of glacial troughs, eroded by a major glacial unconformity, the Ross Sea Unconformity 4 (RSU-4), correlated to a main event between early- and mid-Miocene. The velocity anomalies shown along KSL12-1 can be interpreted as showing the occurrence of gas and fluids, diagenetic horizons and sediment compactions. The isopach maps of each sequence show the variation of thickness of the sediments depocenter shift. The seismic sequence stratigraphy and acoustic facies analysis provide information about different phases of ice sheet's advance and retreat related to the AIS Cenozoic dynamics.

Detrital zircon geochronology and provenance of the Chubut Group in the northeast of Patagonia, Argentina

NASA Astrophysics Data System (ADS)

Navarro, Edgardo L.; Astini, Ricardo A.; Belousova, Elena; Guler, M. Verónica; Gehrels, George

2015-11-01

The Chubut Group constitutes the most widespread sedimentary unit in NE Patagonia, characterized by variable-energy fluvial deposits. U-Pb analysis of detrital zircons from two sections of the Chubut Group constraint the age of the oldest sedimentary rocks in the northeast of the Somuncurá - Cañadón Asfalto Basin. In the Cañadón Williams area, at San Jorge section, 20 km NW of Telsen locality, dating of 56 detrital zircons from a medium to coarse sandstone indicated a maximum depositional age of 109 ± 1 Ma (n = 4). These sandstones were interpreted to represent shallow channels, associated with a lacustrine system. In the Telsen locality, a laser ablation analysis of 115 detrital zircons from a medium to coarse-grained sandstone, from fluvial channel facies, yielded a maximum depositional age of ca. 106 ± 1 Ma (n = 8). Both ages are consistent with volcanic events of the Barremian to Albian age in the central Patagonian Andes Region. Cathodoluminescence images of zircons from the San Jorge sample suggest an igneous origin, which is further supported by Th/U values above 0.5 in most of the grains. The distribution of the statistical modes of the main age populations of detrital zircons for the two samples [182, 185 and 189 Ma for Telsen sample (T2S) and 181 ± 1 Ma for San Jorge sample (SJS)] matches the age of the volcanic Marifil Formation. The rocks of the Marifil Formation of these ages are exposed NE to SE of the study area. The abundance of zircons of similar Jurassic ages (n = 52 for SJS and n = 105 for T2S) and the external morphology of the zircons in the sample SJS, implies a close proximity of the source area. Suggestion that the Marifil Formation was the main provenance source is also supported by northeast-southeasterly paleocurrents measured at the San Jorge and Telsen sections.

A lithology identification method for continental shale oil reservoir based on BP neural network

NASA Astrophysics Data System (ADS)

Han, Luo; Fuqiang, Lai; Zheng, Dong; Weixu, Xia

2018-06-01

The Dongying Depression and Jiyang Depression of the Bohai Bay Basin consist of continental sedimentary facies with a variable sedimentary environment and the shale layer system has a variety of lithologies and strong heterogeneity. It is difficult to accurately identify the lithologies with traditional lithology identification methods. The back propagation (BP) neural network was used to predict the lithology of continental shale oil reservoirs. Based on the rock slice identification, x-ray diffraction bulk rock mineral analysis, scanning electron microscope analysis, and the data of well logging and logging, the lithology was divided with carbonate, clay and felsic as end-member minerals. According to the core-electrical relationship, the frequency histogram was then used to calculate the logging response range of each lithology. The lithology-sensitive curves selected from 23 logging curves (GR, AC, CNL, DEN, etc) were chosen as the input variables. Finally, the BP neural network training model was established to predict the lithology. The lithology in the study area can be divided into four types: mudstone, lime mudstone, lime oil-mudstone, and lime argillaceous oil-shale. The logging responses of lithology were complicated and characterized by the low values of four indicators and medium values of two indicators. By comparing the number of hidden nodes and the number of training times, we found that the number of 15 hidden nodes and 1000 times of training yielded the best training results. The optimal neural network training model was established based on the above results. The lithology prediction results of BP neural network of well XX-1 showed that the accuracy rate was over 80%, indicating that the method was suitable for lithology identification of continental shale stratigraphy. The study provided the basis for the reservoir quality and oily evaluation of continental shale reservoirs and was of great significance to shale oil and gas exploration.

Sedimentary and tectonic evolution of Plio Pleistocene alluvial and lacustrine deposits of Fucino Basin (central Italy)

NASA Astrophysics Data System (ADS)

Cavinato, Gian Paolo; Carusi, Claudio; Dall'Asta, Massimo; Miccadei, Enrico; Piacentini, Tommaso

2002-04-01

The Fucino Basin was the greatest lake of the central Italy, which was completely drained at the end of 19th century. The basin is an intramontane half-graben filled by Plio-Quaternary alluvial and lacustrine deposits located in the central part of the Apennines chain, which was formed in Upper Pliocene and in Quaternary time by the extensional tectonic activity. The analysis of the geological surface data allows the definition of several stratigraphic units grouped in Lower Units and Upper Units. The Lower Units (Upper Pliocene) are exposed along the northern and north-eastern basin margins. They consist of open to marginal lacustrine deposits, breccia deposits and fluvial deposits. The Upper Units (Lower Pliocene-Holocene) consist of interbedded marginal lacustrine deposits and fluvial deposits; thick coarse-grained fan-delta deposits are interfingered at the foot of the main relief with fluvial-lacustrine deposits. Most of the thickness of the lacustrine sequences (more than 1000-m thick) is buried below the central part of the Fucino Plain. The basin is bounded by E-W, WSW-ENE and NW-SE fault systems: Velino-Magnola Fault (E-W) and Tremonti-Celano-Aielli Fault (WSW-ENE) and S. Potito-Celano Fault (NW-SE) in the north; the Trasacco Fault, the Pescina-Celano Fault and the Serrone Fault (NW-SE) in the south-east. The geometry and kinematic indicators of these faults indicate normal or oblique movements. The study of industrial seismic profiles across the Fucino Basin gives a clear picture of the subsurface basin geometry; the basin shows triangular-shaped basin-fill geometry, with the maximum deposits thickness toward the main east boundary fault zones that dip south-westward (Serrone Fault, Trasacco Fault, Pescina-Celano Fault). On the basis of geological surface data, borehole stratigraphy and seismic data analysis, it is possible to recognize and to correlate sedimentary and seismic facies. The bottom of the basin is well recognized in the seismic lines available from the good and continuous signals of the top of Meso-Cenozoic carbonate rocks. The shape of sedimentary bodies indicates that the filling of the basin was mainly controlled by normal slip along the NW-SE boundary faults. In fact, the continental deposits are frequently in on-lap contact over the carbonate substratum; several disconformable contacts occurred during the sedimentary evolution of the basin. The main faults (with antithetic and synthetic fault planes) displace the whole sedimentary sequence up to the surface indicating a recent faults' activity (1915 Avezzano earthquake, Ms=7.0). The stratigraphic and tectonic setting of the Fucino Basin and neighboring areas indicates that the extensional tectonic events have had an important role in driving the structural-sedimentary evolution of the Plio-Quaternary deposits. The geometry of the depositional bodies, of the fault planes and their relationships indicate that the Fucino Basin was formed as a half-graben type structure during Plio-Quaternary extensional events. Some internal complexities are probably related to the fold-and-thrust structures of the Apenninic orogeny formed in Messinian time, in this area, and to a different activity timing of the E-W and WSW-ENE fault systems and the NW-SE fault systems. We believe, based on the similarity of the surface characteristics, that the structural setting of the Fucino Basin can be extrapolated to the other great intramontane basins in Central Italy (e.g. Rieti, L'Aquila, Sulmona, Sora, Isernia basins).

Sedimentology of the Simmler and Vaqueros formations in the Caliente Range-Carrizo Plain area, California

USGS Publications Warehouse

Bartow, J. Alan

1974-01-01

The Simmler and Vaqueros Formations in the Caliente Range-Carrizo Plain area make up a large part of the thick Tertiary sedimentary sequence that was .deposited in a basin which lay along the southwest side of the present-day San Andreas fault. The evolution of this basin during Oligocene and early Miocene time and the relationship of its sedimentary record to the tectonic history is an important chapter in the Tertiary history of California. The Simmler Formation, of provincial Oligocene to early Miocene age, unconformably overlies basement rocks and an Upper Cretaceous-lower Tertiary marine sequence. It consists of a sandstone facies, which is mostly a variegated sequence of sandstone and mudstone occurring in fining-upward cycles, and a conglomerate facies, which occurs around the southwest and southeast margins of the basin. The conformably overlying Vaqueros Formation, of provincial early to middle Miocene age, is subdivided from base upward ,into the Quail Canyon Sandstone, Soda Lake Shale, and Painted Rock Sandstone Members. The Vaqueros intertongues eastward, southeastward, and northward with the continental Caliente Formation and is conformably overlain by the Monterey Shale. In the Caliente Range, northeast of major thrust faults, the Vaqueros may reach a thickness of 8,700 feet (2,650 m). Around the margin of the basin, the formation is much thinner--locally only 200 feet (60 m) thick--and is generally undivided. The Quail Canyon Sandstone Member is composed of cross-bedded or planar-stratified sandstone. The Soda Lake Shale Member consists mostly of siltstone and platy shale with a few thin sandstone interbeds. The Painted Rock Sandstone Member, the thickest and coarsest member, consists mostly of large lenticular bodies of thick-bedded coarse-grained sandstone and thinner units of siltstone. Petrology and paleocurrent studies indicate that, in a given subarea, the Simmler and Vaqueros Formations were derived from the same source terrane and that the sediments were usually transported in the same general direction. Crystalline basement terranes to the north and south were the primary sources, but the Upper Cretaceous-lower Tertiary marine sequence made substantial contributions along the southwest side of the basin. The sandstone facies of the Simmler Formation is interpreted as an alluvial plain depositional complex formed by through-flowing low-sinuosity streams, and the conglomerate facies is interpreted as alluvial fan deposits. The Vaqueros Formation in the Caliente Range forms a transgressive-regressive sequence. The Quail Canyon Sandstone and lowermost Soda Lake Shale Members represent the transgressive phase, are interpreted as beach-nearshore and offshore deposits, and are locally the marine equivalents of the upper part of the Simmler conglomerate facies. The remainder of the Soda Lake Shale Member and the Painted Rock Sandstone Member represent the regressive phase and are interpreted as a complex of deltaic and shelf-slope deposits that prograded over basinal shales and turbidites. The reconstructed basin history began in the Oligocene with alluvial plain sedimentation in an area of relatively low relief. This was interrupted in the early Miocene (ca. 25 m.y. B.P.) by the beginning of a period of crustal extension, probably related to the first interaction of the Pacific and North American plates, resulting in the formation of a rapidly subsiding marine basin. This crustal extension was followed by a period of north-south compression in the Pliocene and Pleistocene, which caused the thick accumulation of sediments in the basin to be folded and thrust over the thinner basin-margin section. The Red Hills-Chimineas-Russell fault trend, along which Cretaceous granitic and Precambrian(?) gneissic rocks had been juxtaposed in Cretaceous time, was reactivated in the Pliocene, when 8 to 9 miles (13-14.5 km) of additional right-lateral slip occurred, The pattern of north-south thrusting and rig

Imaging and locating paleo-channels using geophysical data from meandering system of the Mun River, Khorat Plateau, Northeastern Thailand

NASA Astrophysics Data System (ADS)

Nimnate, P.; Thitimakorn, T.; Choowong, M.; Hisada, K.

2017-12-01

The Khorat Plateau from northeast Thailand, the upstream part of the Mun River flows through clastic sedimentary rocks. A massive amount of sand was transported. We aimed to understand the evolution of fluvial system and to discuss the advantages of two shallow geophysical methods for describing subsurface morphology of modern and paleo-channels. We applied Electrical Resistivity Tomography (ERT) and Ground Penetrating Radar (GPR) to characterize the lateral, vertical morphological and sedimentary structures of paleo-channels, floodplain and recent point bars. Both methods were interpreted together with on-sites boreholes to describe the physical properties of subsurface sediments. As a result, we concluded that four radar reflection patterns including reflection free, shingled, inclined and hummocky reflections were appropriated to apply as criteria to characterize lateral accretion, the meandering rivers with channel-filled sequence and floodplain were detected from ERT profiles. The changes in resistivity correspond well with differences in particle size and show relationship with ERT lithological classes. Clay, silt, sand, loam and bedrock were classified by the resistivity data. Geometry of paleo-channel embayment and lithological differences can be detected by ERT, whereas GPR provides detail subsurface facies for describing point bar sand deposit better than ERT.

Shallowing-upward cyclic patterns within larger-scale transgressive-regressive (T-R) sedimentary sequences, St. Peter through Decorah Formations, Ordovician, Iowa area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witzke, B.J.

1993-03-01

Four large-scale (2--8 Ma) T-R sedimentary sequences of M. Ord. age (late Chaz.-Sherm.) were delimited by Witzke Kolata (1980) in the Iowa area, each bounded by local to regional unconformity/disconformity surfaces. These encompass both siliciclastic and carbonate intervals, in ascending order: (1) St. Peter-Glenwood fms., (2) Platteville Fm., (3) Decorah Fm., (4) Dunleith/upper Decorah fms. Finer-scale resolution of depth-related depositional features has led to regional recognition of smaller-scale shallowing-upward cyclicity contained within each large-scale sequence. Such smaller-scale cyclicity encompasses stratigraphic intervals of 1--10 m thickness, with estimated durations of 0.5--1.5 Ma. The St. Peter Sandst. has long been regarded asmore » a classic transgressive sheet sand. However, four discrete shallowing-upward packages characterize the St. Peter-Glenwood interval regionally (IA, MN, NB, KS), including western facies displaying coarsening-upward sandstone packages with condensed conodont-rich brown shale and phosphatic sediments in their lower part (local oolitic ironstone), commonly above pyritic hardgrounds. Regional continuity of small-scale cyclic patterns in M. Ord. strata of the Iowa area may suggest eustatic controls; this can be tested through inter-regional comparisons.« less

Geomorphological palaeoenvironments of the Sneeuberg Range, Great Karoo, South Africa

NASA Astrophysics Data System (ADS)

Holmes, P. J.; Boardman, J.; Parsons, A. J.; Marker, M. E.

2003-12-01

Sedimentary sequences within headwater valleys on the landward side of the Great Escarpment of South Africa are elucidated and their significance as indicators of environmental change is assessed. This study focuses on the Sneeuberg Range, the most prominent mountain range in the semi-arid central Great Karoo. Valley fills of a hitherto unrecognised complexity and of a greater age than any previously recorded in the central Great Karoo are reported. Three phases of deposition spanning the Late Pleistocene up to the present are documented from sites where gully erosion has incised the valley fills. The earliest depositional phase is represented by deeply weathered, calcretised gravel deposits, which probably were emplaced by debris flow and fluvial processes in the form of a fan. These deposits subsequently were buried by finer grained, largely unconsolidated sediment, with much of this emplacement occurring during the Holocene. There is evidence for phases of landscape stability and instability within this facies. Finally, sheetwash has removed fine-grained sediments from valley flanks and has deposited it either on valley bottoms, or in presently active gullies. This process appears to be ongoing, and is the subject of current investigation. The sedimentary deposits are interpreted as representing a wide range of palaeoenvironmental conditions that have prevailed within the central Great Karoo since the penultimate glaciation. Copyright

Constraining coastal change: A morpho-sedimentological concept to infer sea-level oscillation

NASA Astrophysics Data System (ADS)

Mauz, Barbara; Shen, Zhixiong

2016-04-01

One of the responders to Milankovitch-scale climate changes is sea level which, in turn, is a driver of coastal change. In literature, the sedimentary sequences representing the coastal change are often linked to high sea-level stands, to intermediate sea-level positions or to regressive shorelines. We note apparent contradictions that indicate a lack of concept and inconsistent usage of sea level-related terms. To overcome this, we combine an integrated morpho-sedimentological concept for microtidal, mid-latitudinal coasts with chronologies based on Bayesian statistics. The concept regards the coastal sedimentary system as a depositional complex consisting of shallow-marine, aeolian and alluvial facies. These facies are in juxtaposition and respond simultaneously to external forcing. Bayesian statistics constrains the timing of the sequence based on optical or radiocarbon ages. Here, we present the site Hergla located on the North African coast of the central Mediterranean Sea as a case study to illustrate how the approach helps eliminating contradictions. The site has been cited frequently for confirming the hypothesis of a global two peak sea-level highstand during the last interglacial (MIS 5e). The ~2 km cliff exposure at Hergla was surveyed, mapped, logged and sampled for further describing the sediments and their depositional environment through thin section and Bayesian modelling of optical ages. Using our concept based on sequence stratigraphy tools, the section is interpreted as representing a coastal barrier with two bounding surfaces in the succession. Both surfaces mark the falling sea level of, first, MIS 5e and, second, MIS 5a and hence bound the falling stage system tract of a forced regression. Part of the deposits between the two surfaces are pulled up onto the shoulder of a small rising horst and the associated tectonic event coincided with the MIS 5a sea-level rise enhancing locally the accommodation space for a second foreshore environment. Our presentation will provide theoretical background of the concept and critically discuss the global dataset for last interglacial sea-level oscillations using both the stratigraphic record and age distributions.

Shoreface translation and the Holocene stratigraphic record: Examples from Nova Scotia, the Mississippi Delta and eastern Australia

USGS Publications Warehouse

Boyd, Ron; Penland, S.

1984-01-01

Classic descriptive models of barrier sedimentation have been developed with data from the Atlantic and Gulf coasts of the United States. These models are dominated by low to moderate rates of relative sea level (RSL) rise and wave energy. Barriers respond by landward recycling of sediment through the mechanism of shoreface retreat. Sedimentation processes on the central coast of New South Wales (N.S.W.), Australia, consist of rapid RSL rise in early Holocene times followed by a stillstand since 6500 B.P. Wave energy is relatively high year-round and sand sources for barrier formation are only found on the inner shelf. Barrier sedimentation on the central coast of N.S.W. exhibits a thick, composite sequence composed of a basal marine transgressive sand overlain by regressive beach and dune facies. The Louisiana coast surrounding the Mississippi delta is underlain by compacting deltaic muds which generate very rapid rates of RSL rise. The Louisiana coast experiences low wave energy punctuated by high-energy tropical and extra-tropical storm events. Barrier sediments accumulate from the erosion of deltaic headlands and undergo a transformation from subaerial barrier island systems to subaqueous shoals located on the inner shelf. Drumlins experience coastal erosion on the Eastern Shore of Nova Scotia and provide a sediment source for compartmented estuary mouth barriers. An ongoing, moderate rise of RSL results from the passage of a glacial forebulge. Wave energy is intermediate between Louisiana and N.S.W. and displays a seasonal pattern dominated by frequent winter storms. Coastal barrier sedimentation is episodic, consisting of a period of beach ridge progradation followed by barrier destruction and re-establishment further landward. The three contrasting sedimentary sequences found in examples from Louisiana, N.S.W. and Nova Scotia indicate that presently available sedimentation models from locations such as the middle Atlantic or Texas coasts of the United States may only represent well-documented regional case studies. A true generalised coastal sedimentation model is required which can identify the parameters controlling vertical and horizontal translation of the depositional surface and provide relationships between these parameters which quantitatively predict the genesis, distribution and geometry of coastal sedimentary facies. ?? 1984.