The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam on board Curiosity: Potassic Sedimentary Rocks, Gale Crater

DOE PAGES

Le Deit, L.; Mangold, N.; Forni, O.; ...

2016-05-13

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. Furthermore, from ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K 2O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations then reveals that the mean K 2Omore » abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.« less

The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam on board Curiosity: Potassic Sedimentary Rocks, Gale Crater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Le Deit, L.; Mangold, N.; Forni, O.

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. Furthermore, from ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K 2O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations then reveals that the mean K 2Omore » abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.« less

Collecting Rocks.

ERIC Educational Resources Information Center

Barker, Rachel M.

One of a series of general interest publications on science topics, the booklet provides those interested in rock collecting with a nontechnical introduction to the subject. Following a section examining the nature and formation of igneous, sedimentary, and metamorphic rocks, the booklet gives suggestions for starting a rock collection and using…

Zircon U-Pb ages and Hf isotopic compositions indicate multiple sources for Grenvillian detrital zircon deposited in western Laurentia

NASA Astrophysics Data System (ADS)

Howard, Amanda L.; Farmer, G. Lang; Amato, Jeffrey M.; Fedo, Christopher M.

2015-12-01

Combined U-Pb ages and Hf isotopic data from 1.0 Ga to 1.3 Ga (Grenvillian) detrital zircon in Neoproterozoic and Cambrian siliciclastic sedimentary rocks in southwest North America, and from igneous zircon in potential Mesoproterozoic source rocks, are used to better assess the provenance of detrital zircon potentially transported across Laurentia in major river systems originating in the Grenville orogenic highlands. High-precision hafnium isotopic analyses of individual ∼1.1 Ga detrital zircon from Neoproterozoic siliciclastic sedimentary rocks in Sonora, northern Mexico, reveal that these zircons have low εHf (0) (-22 to -26) and were most likely derived from ∼1.1 Ga granitic rocks embedded in local Mojave Province Paleoproterozoic crust. In contrast, Grenvillian detrital zircons in Cambrian sedimentary rocks in Sonora, the Great Basin, and the Mojave Desert, have generally higher εHf (0) (-15 to -21) as demonstrated both by high precision solution-based, and by lower precision laser ablation, ICPMS data and were likely derived from more distal sources further to the east/southeast in Laurentia. Comparison to new and existing zircon U-Pb geochronology and Hf isotopic data from Grenvillian crystalline rocks from the Appalachian Mountains, central and west Texas, and from Paleoproterozoic terranes throughout southwest North America reveals that zircon in Cambrian sandstones need not entirely represent detritus transported across the continent from Grenville province rocks in the vicinity of the present-day southern Appalachian Mountains. Instead, these zircons could have been derived from more proximal, high εHf (0), ∼1.1 Ga, crystalline rocks such as those exposed today in the Llano Uplift in central Texas and in the Franklin Mountains of west Texas. Regardless of the exact source(s) of the Grenvillian detrital zircon, new and existing whole-rock Nd isotopic data from Neoproterozoic to Cambrian siliciclastic sedimentary rocks in the Mojave Desert demonstrate that the occurrences of higher εHf (0), Grenvillian detrital zircons are decoupled from the sources of the bulk of the sedimentary detritus in which the zircons are entrained. The Cambrian Wood Canyon Formation and the underlying ;off craton; Neoproterozoic Johnnie Formation and Stirling Quartzite all contain higher εHf (0), Grenvillian detrital zircon, in some cases as the dominant detrital zircon population. However, only portions of the Wood Canyon Formation have whole rock Nd isotopic compositions consistent with a bulk sediment source in ∼1.1 Ga sources rocks. Whole rock Nd isotopic compositions of the remaining portions of this unit, and all of the Johnnie Formation and Stirling Quartzite, require bulk sediment sources principally in Paleoproterozoic continental crust. We consider the observed decoupling in the sources of Grenvillian detrital zircon and bulk sediment in the Wood Canyon Formation and underlying siliciclastic sediments as a demonstration that detrital zircon U-Pb and Hf isotopic data alone can provide an incomplete picture of the source of sediments that comprise a given siliciclastic stratigraphic unit.

Synthesis and revision of groups within the Newark Supergroup, eastern North America

USGS Publications Warehouse

Weems, R.E.; Olsen, P.E.

1997-01-01

The Newark Supergroup currently includes nine stratigraphic groups, each of which applies to part or all of the rock column of only one or a few basins. Because the group nomenclature within the Newark Supergroup is neither inclusive nor parallel in its concepts, nearly half of the strata within the Newark Supergroup lacks any group placement. A new system is proposed herein that (1) establishes unambiguous group boundaries, (2) places all Newark Supergroup strata into groups, (3) reduces the number of group names from nine to three, (4) creates parallelism between groups and three major successive tectonic events that created the rift basins containing the Newark Supergroup, and (5) coincidentally provides isochronous or nearly isochronous group boundaries. These proposed groups are (1) the Chatham Group (Middle Triassic to basal Lower Jurassic sedimentary rocks), (2) the Meriden Group (Lower Jurassic extrusive volcanic and sedimentary rocks), and (3) the Agawam Group (new name) (Lower Jurassic sedimentary rocks above all early Mesozoic igneous intrusive and extrusive rocks). This new rock classification system makes use of the fact that a discrete interval of synchronous or nearly synchronous volcanism and plutonism occurred throughout the early Mesozoic rift system of eastern North America. The presence or absence of volcanic rocks provides a powerful stratigraphic tool for establishing regional groups and group boundaries. The presence of sedimentary rocks injected by diabase dikes and sills, in the absence of extrusive volcanic rocks, places Newark Supergroup rocks in the Chatham Group. The presence of extrusive volcanic rocks, interbedded with sedimentary rocks injected by diabase dikes and sills, places Newark Supergroup rocks in the Meriden Group. The presence of sedimentary rocks lacking both extrusive volcanic rocks and diabase dikes and sills, places Newark Supergroup rocks in the Agawam Group. Application of this new regional group stratigraphy to the early Mesozoic rift basins requires revision of the stratigraphy of several basins to make formation boundaries match group boundaries.

Provenance of Carboniferous sedimentary rocks in the northern margin of Dabie Mountains, central China and the tectonic significance: constraints from trace elements, mineral chemistry and SHRIMP dating of zircons

NASA Astrophysics Data System (ADS)

Li, Renwei; Li, Shuangying; Jin, Fuquan; Wan, Yusheng; Zhang, Shukun

2004-04-01

A suite of slightly metamorphosed Carboniferous sedimentary strata occurs in the northern margin of the Dabie Mountains, central China. It consists, in ascending order, of the upper Huayuanqiang Formation (C 1), the Yangshan Formation (C 1), the Daorenchong Formation (C 1-2), the most widely distributed Huyoufang Formation (C 2) and the Yangxiaozhuang Formation (C 2). The provenance of the Carboniferous sedimentary rocks is constrained by the integration of trace elements, detrital mineral chemistry and sensitive high resolution ion microprobe (SHRIMP) dating of detrital zircons, which can help to understand the connection between the provenance and the Paleozoic tectonic evolution of the Qinling-Dabie Orogen. The trace element compositions indicate that the source terrain was probably a continental island arc. Detrital tourmalines were mainly derived from aluminous and Al-poor metapelites and metapsammites, and some are sourced from Li-poor granitoids, pegmatites and aplites. Detrital garnets, found only in the uppermost Huyoufang Formation, are almandine and Mn-almandine garnets, indicating probable sources mainly from garnetiferous schists, and partly from granitoid rocks. The detrital white K-micas are muscovitic in the Huayuanqiang, Daorenchong and Huyoufang Formations, and phengitic with Si contents (p.f.u.) from 3.20 up to max. 3.47-3.53 in the uppermost Huyoufang and the Yangxiaozhuang Formations, a meta-sedimentary source. Major components in the detrital zircon age structure for the Huyoufang Formation range from 506 to 363 Ma, centering on ˜400 and ˜480 Ma, which is characteristic of the Qinling and Erlangping Groups in the Qinling and Tongbai Mountains, central China. Evidently, the major source of the Carboniferous sedimentary rocks in the northern margin of Dabie Mountains was from the southern margin of the Sino-Korean Craton represented by the Qinling and Erlangping Groups. The source area was an island-arc system during the Early Paleozoic that collided with the Sino-Korea plate towards the end of the Early Paleozoic or during the Devonian. A prominent feature in the detrital zircon age structure of the Huyoufang Formation is the Neoproterozoic detritus, which could be derived only from the Yangtze Craton. Reasonable interpretation of the two distinct source materials for the Huyoufang Formation is that the two plates were juxtaposed through collision before the late Carboniferous.

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, J.D.L.; Robinson, P.T.

The largely Eocene Clarno Formation consists of andesitic volcaniclastic rocks interstratified with clayey paludal sediments and lava flows, and cut locally by irregular hypabyssal stocks, dikes and sills. Lateral lithofacies variations are pronounced, and intrusive and extrusive volcanic rocks appear haphazardly emplaced throughout the formation. A range of sedimentary environments is represented, including near-vent flow and breccia accumulations, bouldery high-gradient braided streams, and relatively low-gradient sandy-tuff braidplains associated with paludal deposits. The authors infer that the coarse-grained volcaniclastic rocks of the Clarno Formation accumulated largely in volcanic flank and apron settings. The stratigraphy of the formation indicates that it wasmore » formed in sedimentary lowlands into which many small volcanoes erupted; only a few, scattered remnants of large central vent volcanoes are known. The absence of systematic variation across the unit's large outcrop belt argues against the derivation of the succession from a line of volcanoes beyond the reaches of the present outcrop. The authors infer that the arc was composed of small to medium-sized volcanoes arranged non-systematically over a broad area. The sedimentary succession most probably accumulated in a series of shallow intra-arc depressions formed by crustal stretching and diffuse block rotation driven by oblique subduction during the Eocene.« less

Sedimentary rocks of the coast of Liberia

USGS Publications Warehouse

White, Richard William

1969-01-01

Two basins containing sedimentary rocks o# probable Cretaceous age have been recognized near the coast of Liberia in the area between Monrovia and Buchanan; geophysical evidence suggests that similar though larger basins exist on the adjacent continental shelf. The oldest sedimentary unit recognized, the Paynesville Sandstone of possible early to middle Paleozoic age, is intruded by dikes and sills of diabase of early Jurassic age and lies unconformably on crystalline rocks of late Precambrian age. Dips in the Paynesville Sandstone define a structural basin centered south of Roberts International Airport (formerly called Roberts Field) about 25 miles east of Monrovla. Wackes and conglomerates of Cretaceous age, herein named the Farmington River Formation, unconformably overlie the Paynesville Sandstone and constitute the sedimentary fill in the Roberts basin. The Bassa basin lies to the southeast of the Roberts basin and is separated from it by an upwarp of crystalline rocks. The basin is occupied by wackes and conglomerates of the Farmington River Formation, which apparently lie directly on the crystalline basement. Both basins are bounded on the northeast by northwest-trending dip-slip faults. The best potential for petroleum deposits that exists in Liberia is beneath the adjacent continental shelf and slope. Geophysical exploration and drilling will be required to evaluate this potential.

Interpretation of Gravimetric and Aeromagnetic Data of the Tecoripa Chart in Southeast Sonora, Mexico.

NASA Astrophysics Data System (ADS)

Martínez-Retama, S.; Montaño-Del Cid, M. A.

2015-12-01

The Tecoripa chart H12-D64 is located southeast of the state of Sonora, México, south of Arizona. The geology is represented by sedimentary rocks of the Ordovician and Triassic, volcanic rocks of the Upper Cretaceous and Tertiary, intrusive rocks from the Upper Cretaceous- Tertiary and sedimentary rocks of the Cenozoic. In this paper a gravimetric study was conducted to determine the configuration and depth of the basement and to develop a structural model of the subsurface. For this purpose a consistent gravimetric survey in 3 profiles was conducted. To complement this study, gravimetric data obtained by INEGI (96 gravimetric stations spaced every 4000 m) that correspond to a regional survey was also used. The two sets of data were corrected and processed with the WinGLink software. The profiles were then modeled using the Talwani method. 4 Profiles corresponding to the gravimetric survey and 5 data profiles from INEGI were modeled. Aeromagnetic data from the total field of Tecoripa chart were also processed. The digital information was integrated and processed by generating a data grid. Processes applied to data consisted of reduction to the pole, regional-residual separation and upward continuations. In general, the obtained structural models show intrusive bodies associated with well-defined high gravimetric and magnetic and low gravimetric and magnetic are associated with basins and sedimentary rocks. The obtained geological models show the basement represented by volcanic rocks of the Tarahumara Formation from the Upper Cretaceous which are in contact with sedimentary rocks from the Barranca Group from Upper Cretaceous and limestones from the Middle Ordovician. Both volcanic and sedimentary rocks are intruded by granodiorite- granite with ages of the Tertiary-Oligocene. Based on the superficial geology as well as in the configuration of the basement and the obtained structural model the existence of faults with NW-SE orientation that originate Horst and Graben type structures can be inferred. The basins have depths of 2,000 to 4,000m with sedimentary fillings from the Báucarit Formation and Quaternary sediments.

The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam Onboard Curiosity

USGS Publications Warehouse

Le Deit, Laetitia; Mangold, Nicolas; Forni, Olivier; Cousin, Agnes; Lasue, Jeremie; Schröder, Susanne; Wiens, Roger C.; Sumner, Dawn Y.; Fabre, Cecile; Stack, Katherine M.; Anderson, Ryan; Blaney, Diana L.; Clegg, Samuel M.; Dromart, Gilles; Fisk, Martin; Gasnault, Olivier; Grotzinger, John P.; Gupta, Sanjeev; Lanza, Nina; Le Mouélic, Stephane; Maurice, Sylvestre; McLennan, Scott M.; Meslin, Pierre-Yves; Nachon, Marion; Newsom, Horton E.; Payre, Valerie; Rapin, William; Rice, Melissa; Sautter, Violaine; Treiman, Alan H.

2016-01-01

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. From ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K2O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations reveals that the mean K2O abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.

The genesis of Mo-Cu deposits and mafic igneous rocks in the Senj area, Alborz magmatic belt, Iran

NASA Astrophysics Data System (ADS)

Nabatian, Ghasem; Li, Xian-Hua; Wan, Bo; Honarmand, Maryam

2017-11-01

The geochemical and isotopic investigations were provided on the Upper Eocene Senj mafic intrusion and Mo-Cu mineralization to better understand the tectono-magmatic evolution and metallogeny of the central part of the Alborz magmatic belt. The Senj mafic intrusion is composed of gabbro to monzodiorite and monzonite in lithology, and intruded as a sill into volcano-sedimentary rocks of the Eocene Karaj Formation. The Karaj Formation consists of volcano-sedimentary rocks, such as altered crystalline to shaly tuffs. The Senj intrusion (39.7 ± 0.4 Ma) shows LILE and LREE enrichment and negative anomaly of Nb, Ta and Ti, the geochemical signatures similar to those from subduction-related mafic magmas. The Hf-O zircon analyses yield ɛHf(t) values of + 4.1 to + 11.1 and δ18O values of + 4.8 to + 6.2‰. The zircon isotopic signatures together with shoshonitic affinity in the Senj mafic samples suggest partial melting of an enriched lithospheric mantle that had already been metasomatized by slab-derived melts and fluids. The Mo-Cu mineralization mainly occurs as veins and veinlets in the volcano-sedimentary rocks of the Karaj Formation and is dominated by molybdenite with minor amounts of chalcopyrite, bornite, pyrite and tetrahedrite-tennantite. The associated gangue minerals are tremolite, actinolite, quartz, calcite, chlorite and epidote. The Senj Mo-Cu deposit formed in volcano-sedimentary rocks following the emplacement of the Late Eocene Senj sill. The source of molybdenite in the Senj deposit is dominantly from crustal materials as it is revealed by Re contents in the molybdenite minerals (0.5 to 0.7 ppm). In fact, the molybdenite occurrence may be a remobilization process related to the emplacement of the Senj mafic magma.

The Classification Ability with Naked Eyes According to the Understanding Level about Rocks of Pre-service Science Teachers

NASA Astrophysics Data System (ADS)

Seong, Cho Kyu; Ho, Chung Duk; Pyo, Hong Deok; Kyeong Jin, Park

2016-04-01

This study aimed to investigate the classification ability with naked eyes according to the understanding level about rocks of pre-service science teachers. We developed a questionnaire concerning misconception about minerals and rocks. The participant were 132 pre-service science teachers. Data were analyzed using Rasch model. Participants were divided into a master group and a novice group according to their understanding level. Seventeen rocks samples (6 igneous, 5 sedimentary, and 6 metamorphic rocks) were presented to pre-service science teachers to examine their classification ability, and they classified the rocks according to the criteria we provided. The study revealed three major findings. First, the pre-service science teachers mainly classified rocks according to textures, color, and grain size. Second, while they relatively easily classified igneous rocks, participants were confused when distinguishing sedimentary and metamorphic rocks from one another by using the same classification criteria. On the other hand, the understanding level of rocks has shown a statistically significant correlation with the classification ability in terms of the formation mechanism of rocks, whereas there was no statically significant relationship found with determination of correct name of rocks. However, this study found that there was a statistically significant relationship between the classification ability with regard the formation mechanism of rocks and the determination of correct name of rocks Keywords : Pre-service science teacher, Understanding level, Rock classification ability, Formation mechanism, Criterion of classification

Heterogeneous vesiculation of 2011 El Hierro xeno-pumice revealed by X-ray computed microtomography

NASA Astrophysics Data System (ADS)

Berg, S. E.; Troll, V. R.; Deegan, F. M.; Burchardt, S.; Krumbholz, M.; Mancini, L.; Polacci, M.; Carracedo, J. C.; Soler, V.; Arzilli, F.; Brun, F.

2016-12-01

During the first week of the 2011 El Hierro submarine eruption, abundant light-coloured pumiceous, high-silica volcanic bombs coated in dark basanite were found floating on the sea. The composition of the light-coloured frothy material (`xeno-pumice') is akin to that of sedimentary rocks from the region, but the textures resemble felsic magmatic pumice, leaving their exact mode of formation unclear. To help decipher their origin, we investigated representative El Hierro xeno-pumice samples using X-ray computed microtomography for their internal vesicle shapes, volumes, and bulk porosity, as well as for the spatial arrangement and size distributions of vesicles in three dimensions (3D). We find a wide range of vesicle morphologies, which are especially variable around small fragments of rock contained in the xeno-pumice samples. Notably, these rock fragments are almost exclusively of sedimentary origin, and we therefore interpret them as relicts an the original sedimentary ocean crust protolith(s). The irregular vesiculation textures observed probably resulted from pulsatory release of volatiles from multiple sources during xeno-pumice formation, most likely by successive release of pore water and mineral water during incremental heating and decompression of the sedimentary protoliths.

Use of structural geology in exploration for and mining of sedimentary rock-hosted Au deposits

USGS Publications Warehouse

Peters, Stephen G.

2001-01-01

Structural geology is an important component in regional-, district- and orebody-scale exploration and development of sedimentary rock-hosted Au deposits.Identification of timing of important structural events in an ore district allows analysis and classification of fluid conduits and construction of genetic models for ore formation.The most practical uses of structural geology deal with measurement and definition of various elements that comprise orebodies, which can then be directly applied to ore-reserve estimation,ground control,grade control, safety issues,and mine planning.District- and regional-scale structural studies are directly applicable to long-term strategic planning,economic analysis,and land ownership. Orebodies in sedimentary rock-hosted Au deposits are discrete, hypogene, epigenetic masses usually hosted in a fault zone,breccia mass, or lithologic bed or unit. These attributes allow structural geology to be directly applied to the mining and exploration of sedimentary rock-hosted Au deposits. Internal constituents in orebodies reflect unique episodes relating to ore formation.The main internal constituents in orebodies are ore minerals, gangue, and alteration minerals that usually are mixed with one another in complex patterns, the relations among which may be used to interpret the processes of orebody formation and control.Controls of orebody location and shape usually are due to structural dilatant zones caused by changes in attitude, splays, lithologic contacts,and intersections of the host conduit or unit.In addition,conceptual parameters such as district fabric,predictable distances, and stacking also are used to understand the geometry of orebodies.Controls in ore districts and location and geometry of orebodies in ore districts can be predicted to various degrees by using a number of qualitative concepts such as internal and external orebody plunges,district plunge, district stacking, conduit classification, geochemical, geobarometric and geothermal gradients, and tectonic warps. These concepts have practical and empirical application in most mining districts where they are of use in the exploration for ore, but are of such broad and general application that they may not represent known or inferred ore formation processes. Close spatial relation among some sedimentary rock- hosted Au deposits and their host structures suggests that the structures and the orebodies are genetically linked because they may have shared the same developmental history. Examples of probable syn-deformational genesis and structural control of sedimentary rock-hosted Au deposits are in the large Betze deposit in the Carlin trend, Nevada and in the Lannigou, Jinlongshan, and Maanqiao Au deposits, China.

Sedimentary rock-hosted Au deposits of the Dian-Qian-Gui area, Guizhou, and Yunnan Provinces, and Guangxi District, China

USGS Publications Warehouse

Peters, S.G.; Jiazhan, H.; Zhiping, L.; Chenggui, J.

2007-01-01

Sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area in southwest China are hosted in Paleozoic and early Mesozoic sedimentary rocks along the southwest margin of the Yangtze (South China) Precambrian craton. Most deposits have characteristics similar to Carlin-type Au deposits and are spatially associated, on a regional scale, with deposits of coal, Sb, barite, As, Tl, and Hg. Sedimentary rock-hosted Au deposits are disseminated stratabound and(or) structurally controlled. The deposits have many similar characteristics, particularly mineralogy, geochemistry, host rock, and structural control. Most deposits are associated with structural domes, stratabound breccia bodies, unconformity surfaces or intense brittle-ductile deformation zones, such as the Youjiang fault system. Typical characteristics include impure carbonate rock or calcareous and carbonaceous host rock that contains disseminated pyrite, marcasite, and arsenopyrite-usually with ??m-sized Au, commonly in As-rich rims of pyrite and in disseminations. Late realgar, orpiment, stibnite, and Hg minerals are spatially associated with earlier forming sulfide minerals. Minor base-metal sulfides, such as galena, sphalerite, chalcopyrite, and Pb-Sb-As-sulphosalts also are present. The rocks locally are silicified and altered to sericite-clay (illite). Rocks and(or) stream-sediment geochemical signatures typically include elevated concentrations of As, Sb, Hg, Tl, and Ba. A general lack of igneous rocks in the Dian-Qian-Gui area implies non-pluton-related, ore forming processes. Some deposits contain evidence that sources of the metal may have originated in carbonaceous parts of the sedimentary pile or other sedimentary or volcanic horizons. This genetic process may be associated with formation and mobilization of petroleum and Hg in the region and may also be related to As-, Au-, and Tl-bearing coal horizons. Many deposits also contain textures and features indicative of strong structural control by tectonic domes or shear zones and also suggest syndeformational ore deposition, possibly related to the Youjiang fault system. Several sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area also are of the red earth-type and Au grades have been concentrated and enhanced during episodes of deep weathering. ?? 2006 Elsevier B.V. All rights reserved.

Geochemistry of approximately 1.9 Ga sedimentary rocks from northeastern Labrador, Canada

NASA Technical Reports Server (NTRS)

Hayashi, K. I.; Fujisawa, H.; Holland, H. D.; Ohmoto, H.

1997-01-01

Fifty-eight rock chips from fifteen samples of sedimentary rocks from the Ramah Group (approximately 1.9 Ga) in northeastern Labrador, Canada, were analyzed for major and minor elements, including C and S, to elucidate weathering processes on the Earth's surface about 1.9 Ga ago. The samples come from the Rowsell Harbour, Reddick Bight, and Nullataktok Formations. Two rock series, graywackes-gray shales of the Rowsell Harbour, Reddick Bight and Nullataktok Formations, and black shales of the Nullataktok Formation, are distinguishable on the basis of lithology, mineralogy, and major and trace element chemistry. The black shales show lower concentrations than the graywackes-gray shales in TiO2 (0.3-0.7 wt% vs. 0.7-1.8 wt%), Al2O3 (9.5-20.1 wt% vs. 13.0-25.0 wt%), and sigma Fe (<1 wt% vs. 3.8-13.9 wt% as FeO). Contents of Zr, Th, U, Nb, Ce, Y, Rb, Y, Co, and Ni are also lower in the black shales. The source rocks for the Ramah Group sediments were probably Archean gneisses with compositions similar to those in Labrador and western Greenland. The major element chemistry of source rocks for the Ramah Group sedimentary rocks was estimated from the Al2O3/TiO2 ratios of the sedimentary rocks and the relationship between the major element contents (e.g., SiO2 wt%) and Al2O3/TiO2 ratios of the Archean gneisses. This approach is justified, because the Al/Ti ratios of shales generally retain their source rock values; however, the Zr/Al, Zr/Ti, and Cr/Ni ratios fractionate during the transport of sediments. The measured SiO2 contents of shales in the Ramah Group are generally higher than the estimated SiO2 contents of source rocks by approximately 5 wt%. This correction may also have to be applied when estimating average crustal compositions from shales. Two provenances were recognized for the Ramah Group sediments. Provenance I was comprised mostly of rocks of bimodal compositions, one with SiO2 contents approximately 45 wt% and the other approximately 65 wt%, and was the source for most sedimentary rocks of the Ramah Group, except for black shales of the Nullataktok Formation. The black shales were apparently derived from Provenance II that was comprised mostly of felsic rocks with SiO2 contents approximately 65 wt%. Comparing the compositions of the Ramah Group sedimentary rocks and their source rocks, we have recognized that several major elements, especially Ca and Mg, were lost almost entirely from the source rocks during weathering and sedimentation. Sodium and potassium were also leached almost entirely during the weathering of the source rocks. However, significant amounts of Na were added to the black shales and K to all the rock types during diagenesis and/or regional metamorphism. The intensity of weathering of source rocks for the Ramah Group sediments was much higher than that of typical Phanerozoic sediments, possibly because of a higher PCO2 in the Proterozoic atmosphere. Compared to the source rock values, the Fe3+/Ti ratios of many of the graywackes and gray shales of the Ramah Group are higher, the Fe2+/Ti ratios are lower, and the sigma Fe/Ti ratios are the same. Such characteristics of the Fe geochemistry indicate that these sedimentary rocks are comprised of soils formed by weathering of source rocks under an oxygen-rich atmosphere. The atmosphere about 1.9 Ga was, therefore, oxygen rich. Typical black shales of Phanerozoic age exhibit positive correlations between the organic C contents and the concentrations of S, U, and Mo, because these elements are enriched in oxygenated seawater and are removed from seawater by organic matter in sediments. However, such correlations are not found in the Ramah Group sediments. Black shales of the Ramah Group contain 1.7-2.8 wt% organic C, but are extremely depleted in sigma Fe (<1 wt% as FeO), S (<0.3 wt%), U (approximately l ppm), Mo (<5 ppm), Ni (<2 ppm), and Co (approximately 0 ppm). This lack of correlation, however, does not imply that the approximately 1.9 Ga atmosphere-ocean system was anoxic. Depletion of these elements from the Ramah Group sediments may have occurred during diagenesis.

Late Paleozoic tectonics of the Solonker Zone in the Wuliji area, Inner Mongolia, China: Insights from stratigraphic sequence, chronology, and sandstone geochemistry

NASA Astrophysics Data System (ADS)

Shi, Guanzhong; Song, Guangzeng; Wang, Hua; Huang, Chuanyan; Zhang, Lidong; Tang, Jianrong

2016-09-01

The geology in the Wuliji area (including the Enger Us and Quagan Qulu areas) is important for understanding the Late Paleozoic tectonics of the Solonker Zone. Ultramafic/mafic rocks in the Enger Us area, previously interpreted as an ophiolitic suture, are actually lava flows and sills in a Permian turbiditic sequence and a small body of fault breccia containing serpentinite. Subduction zone features, such as accretionary complexes, magmatic arc volcanics or LP/HP metamorphism are absent. Early Permian N-MORB mafic rocks and Late Permian radiolarian cherts accompanied by turbidites and tuffeous rocks indicate a deep water setting. In the Quagan Qulu area, outcrops of the Late Carboniferous to Permian Amushan Formation are composed of volcano-sedimenary rocks and guyot-like reef limestone along with a Late Permian volcano-sedimentary unit. A dacite lava in the Late Permian volcano-sedimentary unit yields a zircon U-Pb age of 254 Ma. The gabbros in the Quagan Qulu area are intruded into the Amushan Formation and caused contact metamorphism of country rocks. Sandstones in the Upper Member of the Amushan Formation contain detrital clasts of volcanic fragments and mineral clasts of crystalline basement rocks (i.e. biotite, muscovite and garnet). Geochemical analysis of volcaniclastic sandstones shows a magmatic affinity to both continental island arc (CIA) and active continental margin (ACM) tectonic settings. A Late Permian incipient rift setting is suggested by analyzing the lithostratigraphic sequence and related magmatism in the Wuliji area. The volcano-sedimentary rocks in the Wuliji area experienced a nearly N-S shortening that was probably related to the Early Mesozoic nearly N-S compression well developed in other areas close to the Wuliji area.

Pre-lithification tectonic foliation development in a clastic sedimentary sequence

NASA Astrophysics Data System (ADS)

Meere, Patrick; Mulchrone, Kieran; McCarthy, David; Timmermann, Martin; Dewey, John

2016-04-01

The current view regarding the timing of regionally developed penetrative tectonic fabrics in sedimentary rocks is that their development postdates lithification of those rocks. In this case fabric development is achieved by a number of deformation mechanisms including grain rigid body rotation, crystal-plastic deformation and pressure solution (wet diffusion). The latter is believed to be the primary mechanism responsible for shortening and the domainal structure of cleavage development commonly observed in low grade metamorphic rocks. In this study we combine field observations with strain analysis and modelling to fully characterise considerable (>50%) mid-Devonian Acadian crustal shortening in a Devonian clastic sedimentary sequence from south west Ireland. Despite these high levels of shortening and associated penetrative tectonic fabric there is a marked absence of the expected domainal cleavage structure and intra-clast deformation, which are expected with this level of deformation. In contrast to the expected deformation processes associated with conventional cleavage development, fabrics in these rocks are a product of translation, rigid body rotation and repacking of extra-formational clasts during deformation of an un-lithified clastic sedimentary sequence.

Stratigraphy and tectonic history of the Tucson Basin, Pima County, Arizona, based on the Exxon state (32)-1 well

USGS Publications Warehouse

Houser, Brenda B.; Peters, Lisa; Esser, Richard P.; Gettings, Mark E.

2004-01-01

The Tucson Basin is a relatively large late Cenozoic extensional basin developed in the upper plate of the Catalina detachment fault in the southern Basin and Range Province, southeastern Arizona. In 1972, Exxon Company, U.S.A., drilled an exploration well (Exxon State (32)-1) near the center of the Tucson Basin that penetrated 3,658 m (12,001 ft) of sedimentary and volcanic rocks above granitoid basement. Detailed study of cuttings and geophysical logs of the Exxon State well has led to revision of the previously reported subsurface stratigraphy for the basin and provided new insight into its depositional and tectonic history. There is evidence that detachment faulting and uplift of the adjacent Catalina core complex on the north have affected the subsurface geometry of the basin. The gravity anomaly map of the Tucson Basin indicates that the locations of subbasins along the north-trending axis of the main basin coincide with the intersection of this axis with west-southwest projections of synforms in the adjacent core complex. In other words, the subbasins overlie synforms and the ridges between subbasins overlie antiforms. The Exxon State well was drilled near the center of one of the subbasins. The Exxon well was drilled to a total depth of 3,827 m (12,556 ft), and penetrated the following stratigraphic section: Pleistocene(?) to middle(?) Miocene upper basin-fill sedimentary rocks (0-908 m [0-2,980 ft]) lower basin-fill sedimentary rocks (908-1,880 m [2,980-6,170 ft]) lower Miocene and upper Oligocene Pantano Formation (1,880-2,516 m [6,170-8,256 ft]) upper Oligocene to Paleocene(?) volcanic and sedimentary rocks (2,516-3,056 m [8,256-10,026 ft]) Lower Cretaceous to Upper Jurassic Bisbee Group (3,056-3,658 m [10,026-12,001 ft]) pre-Late Jurassic granitoid plutonic rock (3,658-3,827 m [12,001- 12,556 ft]). Stratigraphy and Tectonic History of the Tucson Basin, Pima County, Arizona, Based on the Exxon State (32)-1 Well The 1,880 m (6,170 ft) of basin-fill sedimentary rocks consist of alluvial-fan, alluvial-plain, and playa facies. The uppermost unit, a 341-m-thick (1,120-ft) lower Pleistocene and upper Pliocene alluvial-fan deposit (named the Cienega Creek fan in this study), is an important aquifer in the Tucson basin. The facies change at the base of the alluvial fan may prove to be recognizable in well data throughout much of the basin. The well data show that a sharp boundary at 908 m (2,980 ft) separates relatively unconsolidated and undeformed upper basin fill from denser, significantly faulted lower basin fill, indicating that there were two stages of basin filling in the Tucson basin as in other basins of the region. The two stages apparently occurred during times of differing tectonic style in the region. In the Tucson area the Pantano Formation, which contains an andesite flow dated at about 25 Ma, fills a syntectonic basin in the hanging wall of the Catalina detachment fault, reflecting middle Tertiary extension on the fault. The formation in the well is 636 m thick (2,086 ft) and consists of alluvial-fan, playa, and lacustrine sedimentary facies, a lava flow, and rock- avalanche deposits. Analysis of the geophysical logs indicates that a K-Ar date of 23.4 Ma reported previously for the Pantano interval of the well was obtained on selected cuttings collected from a rock-avalanche deposit near the base of the unit and, thus, does not date the Pantano Formation. The middle Tertiary volcanic and sedimentary rocks have an aggregate thickness of 540 m (1,770 ft). We obtained a new 40Ar/ 39Ar age of 26.91+0.18 Ma on biotite sampled at a depth of 2,584-2,609 m (8,478-8,560 ft) from a 169-m-thick (554-ft) silicic tuff in this interval. The volcanic rocks probably correlate with other middle Tertiary volcanic rocks of the area, and the sedimentary rocks may correlate with the Cloudburst and Mineta Formations exposed on the flanks of the San Pedro Basin to the northeast. The Bisbee Group in the Exxon well is 602 m (1,975 f

Sources of metals in the Porgera gold deposit, Papua New Guinea: Evidence from alteration, isotope, and noble metal geochemistry

NASA Astrophysics Data System (ADS)

Richards, Jeremy P.; McCulloch, Malcolm T.; Chappell, Bruce W.; Kerrich, Robert

1991-02-01

The Porgera gold deposit is spatially and temporally associated with the Late Miocene, mafic, alkalic, epizonal Porgera Intrusive Complex (PIC), located in the highlands of Papua New Guinea (PNG). The highlands region marks the site of a Tertiary age continent-island-arc collision zone, located on the northeastern edge of the Australasian craton. The PIC was emplaced within continental crust near the Lagaip Fault Zone, which represents an Oligocene suture between the craton and volcano-sedimentary rocks of the Sepik terrane. Magmatism at Porgera probably occurred in response to the Late Miocene elimination of an oceanic microplate, and subsequent Early Pliocene collision between the craton margin and an arc system located on the Bismarck Sea plate. Gold mineralization occurred within 1 Ma of the time of magmatism. Metasomatism accompanying early disseminated Au mineralization in igneous host rocks resulted in additions of K, Rb, Mn, S, and CO 2, and depletions of Fe, Mg, Ca, Na, Ba, and Sr; rare-earth and high-field-strength elements remained largely immobile. Pervasive development of illite-K-feldspar-quartz-carbonate alteration assemblages suggests alteration by mildly acidic, 200 to 350°C fluids, at high water/ rock ratios. Strontium and lead isotopic compositions of minerals from early base-metal sulphide veins associated with K-metasomatism, and later quartz-roscoelite veins carrying abundant free gold and tellurides, are remarkably uniform (e.g., 87Sr /86Sr = 0.70745 ± 0.00044 [n = 10] , 207Pb /204Pb = 15.603 ± 0.004 [n = 15] ). These compositions fall between those of unaltered igneous and sedimentary host rocks, and specifically sedimentary rocks from the Jurassic Om Formation which underlies the deposit (igneous rocks: 87Sr /86Sr ≈ 0.7035 , 207Pb /204Pb ≈ 15.560 ; Om Formation: 87Sr /86Sr |t~ 0.7153 , 207Pb /204Pb ≈ 15.636 ). It is therefore suggested that the hydrothermal fluids acquired their Sr and Pb isotopic signatures by interaction with, or direct derivation from, a plutonic root of the PIC and host sedimentary rocks of the Om Formation. It is likely that Au was also derived from one or both of these two sources. Concentrations of Au in unaltered igneous and sedimentary rocks from Porgera (≤10 ppb Au) do not indicate that either lithology represents a significantly enriched protore, although Au and platinum-group element (PGE) abundances in the igneous rocks suggest a mild primary magmatic enrichment of Au relative to the PGE (average [ Au/( Pt + Pd)] mantlenormalized = 14.0 ± 6.5 [ n = 8]). Evidence that the Porgera magmas were rich in volatiles permits speculation that Au may have been concentrated in a magmatic fluid phase, but alternative possibilities such as derivation of Au by hydrothermal leaching of solidified igneous materials or sedimentary rocks cannot be excluded at this time.

From crustal thinning to mantle exhumation: what the Pyrenean breccia formations tell us.

NASA Astrophysics Data System (ADS)

Clerc, C.; Chauvet, A.; Lagabrielle, Y.; Reynaud, J.-Y.; Boulvais, P.; Bousquet, R.; Lahfid, A.; Vauchez, A.; Mahé, S.

2012-04-01

Several formations with various breccia types occur in Mesozoic basins disseminated along the North Pyrenean fault, on the northern flank of the French Pyrenees. Due to their location along the Iberia-Europa plate boundary, the North Pyrenean breccia formations represent complex archives documenting the tectonic and sedimentary evolution of the Pyrenean realm during the Aptian-Albian period. In particular, the North Pyrenean breccia formations have recorded the main stages of crustal thinning, continental break-up and mantle exhumation, which occurred along the North Pyrenean Zone (NPZ). We will review the main sedimentary, structural, metamorphic and geochemical characters of these breccias, based on new field investigations conducted in both the Western and Eastern Pyrenées (Agly, Aulus, Moncaup-St Béas and Urdach localities). Based on our new founding, we re-intrepret the significance of the breccia formations in the light of the most recent models developed for the pre-orogenic evolution of the Pyrenees. In several places and mostly close to the contact between Paleozoic basement and Mesozoic cover, we systematically recognized the following three types of breccias: i) Semi-ductile syn-metamorphic breccias resulting from the boudinage of silicic or dolomitic beddings in ductily deformed marbles. ii) Cataclastic breccias disturbing the neighbouring host rocks and displaying a relatively monogenetic character. These tectonic breccias result from the disruption of the Mesozoic metamorphic platform under cooling conditions. They are dominated by cataclastic levels mainly located in the Triassic and Liassic weaker levels, iii) Polymictic sedimentary breccias, which composition is dominated by clasts of Mesozoic metasediments. Locally, close to subcontinental mantle bodies, the sedimentary breccias include numerous clasts of ultramafic and/or crustal basement rocks. Such breccias are the witness of the disruption of the sedimentary cover of the North Pyrenean Zone massifs followed by clastic sedimentation in a context of hyper-extended crust and mantle exhumation. Improving the knowledge of the formation of the different types of breccia exposed all along the Northern Pyrenees brings important hints to decipher the tectonic history responsible for the formation of the metamorphic basins and the exhumation (and reworking) of deep crustal and mantle rocks in the NPZ.

Chemistry and texture of the rocks at Rocknest, Gale Crater: Evidence for sedimentary origin and diagenetic alteration

USGS Publications Warehouse

Blaney, Diana L.; Wiens, R.C.; Maurice, S.; Clegg, S.M.; Anderson, Ryan; Kah, L.C.; Le Mouélic, S.; Ollila, A.; Bridges, N.; Tokar, R.; Berger, G.; Bridges, J.C.; Cousin, A.; Clark, B.; Dyar, M.D.; King, P.L.; Lanza, N.; Mangold, N.; Meslin, P.-Y.; Newsom, H.; Schroder, S.; Rowland, S.; Johnson, J.; Edgar, L.; Gasnault, O.; Forni, O.; Schmidt, M.; Goetz, W.; Stack, K.; Sumner, D.; Fisk, M.; Madsen, M.B.

2014-01-01

A suite of eight rocks analyzed by the Curiosity Rover while it was stopped at the Rocknest sand ripple shows the greatest chemical divergence of any potentially sedimentary rocks analyzed in the early part of the mission. Relative to average Martian soil and to the stratigraphically lower units encountered as part of the Yellowknife Bay formation, these rocks are significantly depleted in MgO, with a mean of 1.3 wt %, and high in Fe, averaging over 20 wt % FeOT, with values between 15 and 26 wt % FeOT. The variable iron and low magnesium and rock texture make it unlikely that these are igneous rocks. Rock surface textures range from rough to smooth, can be pitted or grooved, and show various degrees of wind erosion. Some rocks display poorly defined layering while others seem to show possible fractures. Narrow vertical voids are present in Rocknest 3, one of the rocks showing the strongest layering. Rocks in the vicinity of Rocknest may have undergone some diagenesis similar to other rocks in the Yellowknife Bay Formation as indicated by the presence of soluble calcium phases. The most reasonable scenario is that fine-grained sediments, potentially a mixture of feldspar-rich rocks from Bradbury Rise and normal Martian soil, were lithified together by an iron-rich cement.

Bedrock Geology and Asbestos Deposits of the Upper Missisquoi Valley and Vicinity, Vermont

USGS Publications Warehouse

Cady, Wallace Martin; Albee, Arden Leroy; Chidester, A.H.

1963-01-01

The upper Missisquoi Valley and vicinity as described in this report covers an area of about 250 square miles at the headwaters of the Missisquoi River in north-central Vermont. About 90 percent of the area is forested and the remainder is chiefly farm land. The topography reflects the geologic structure and varied resistance of the bedrock to erosion. Most of the area is on the east limb of the Green Mountain anticlinorium, which is the principal structural feature of Vermont. The bedrock is predominantly sedimentary and volcanic rock that has been regionally metamorphosed. It was intruded before metamorphism by mafic and ultramafic igneous rocks, and after metamorphism by felsic and mafic igneous rocks. The metamorphosed sedimentary and volcanic rocks range in age from Cambrian(?) to Middle Silurian, the intrusive igneous rocks from probably Late Ordovician to probably late Permian. Metamorphism and principal folding in the region occurred in Middle Devonian time. The metamorphosed sedimentary and volcanic rocks make up a section at least 25,000 feet thick and can be divided into nine formations. The Hazens Notch formation of Cambrian(?) and Early Cambrian age is characterized by carbonaceous schist. It is succeeded in western parts of the area by the Jay Peak formation of Early Cambrian age, which is chiefly a schist that is distinguished by the general absence of carbonaceous zones; in central parts of the area the Hazens Notch formation is followed by the Belvidere Mountain amphibolite, probably the youngest of the formations of Early Cambrian age. The Ottauquechee formation, composed of carbonaceous phyllite and quartzite, and phyllitic graywacke, is of Middle Cambrian age. The Stowe formation of Late Cambrian(?) and Early(?) Ordovician age overlies the Ottauquechee and is predominantly noncarbonaceous schist, though it also contains greenstone and carbonaceous schist and phyllite. The Umbrella Hill formation of Middle Ordovician age is characteristically a conglomerate in which the mineral chloritoid is common. The overlying Moretown formation, also of Middle Ordovician age, contains granulite and slate, also greenstone and amphibolite of the Coburn Hill volcanic member. The Shaw Mountain formation, made up of conglomerate, phyllite, and limestone, is the oldest Silurian unit. The Shaw Mountain formation is succeeded by the Northfield slate of Middle Silurian age. The igneous rocks of the region include various ultramafic plutonic rocks, such as dunite, peridotite, and serpentinite, probably of Late Ordovician age; sills and nearly concordant dikes of metagabbro of Late Ordovician age; biotite granite plutons or Middle or Late Devonian age, most notably on Eltey Mountain; and hypabyssallamprophyre, probably of late Permian age. Metamorphic zoning is shown by the distribution of rocks of the epidote-amphibolite facies and the greenschist facies in and near the Green Mountains, and near Coburn Hill and Eltey Mountain. Metasomatism related to regional metamorphism has produced porphyroblasts and quartz segregations in the sedimentary and volcanic rocks, and steatitization and carbonatization of serpentinite. Contact metamorphism has formed rocks of the epidote-amphibolite facies near granite plutons, and probably calc-silicate rock at the contacts of ultramafic plutons. The axial anticline of the Green Mountain anticlinorium and other anticlines and synclines to the east are the major longitudinal structural features of the area. These structures are complicated by transverse folds, particularly a syncline in the vicinity of Tillotson Peak. Early minor cross folds that are best developed in the Hazens Notch formation are believed to be genetically related to the transverse folds. The axial planes of the cross folds are folded about the axes of the later longitudinal folds of the Green Mountain anticlinorium. The longitudinal and transverse fold systems probably formed in the same episode of defor

Sedimentary facies of the upper Cambrian (Furongian; Jiangshanian and Sunwaptan) Tunnel City Group, Upper Mississippi Valley: new insight on the old stormy debate

USGS Publications Warehouse

Eoff, Jennifer D.

2014-01-01

New data from detailed measured sections permit a comprehensive revision of the sedimentary facies of the Furongian (upper Cambrian; Jiangshanian and Sunwaptan stages) Tunnel City Group (Lone Rock Formation and Mazomanie Formation) of Wisconsin and Minnesota. Heterogeneous sandstones, comprising seven lithofacies along a depositional transect from shoreface to transitional-offshore environments, record sedimentation in a storm-dominated, shallow-marine epicontinental sea. The origin of glauconite in the Birkmose Member and Reno Member of the Lone Rock Formation was unclear, but its formation and preserved distribution are linked to inferred depositional energy rather than just net sedimentation rate. Flat-pebble conglomerate, abundant in lower Paleozoic strata, was associated with the formation of a condensed section during cratonic flooding. Hummocky cross-stratification was a valuable tool used to infer depositional settings and relative paleobathymetry, and the model describing formation of this bedform is expanded to address flow types dominant during its genesis, in particular the importance of an early unidirectional component of combined flow. The depositional model developed here for the Lone Rock Formation and Mazomanie Formation is broadly applicable to other strata common to the early Paleozoic that document sedimentation along flooded cratonic interiors or shallow shelves.

Chemical composition of sedimentary rocks in California and Hawaii

USGS Publications Warehouse

Hill, Thelma P.

1981-01-01

A compilation of published chemical analyses of sedimentary rocks of the United States was undertaken by the U.S. Geological Survey in 1952 to make available scattered data that are needed for a wide range of economic and scientific uses. About 20,000-25,000 chemical analyses of sedimentary rocks in the United States have been published. This report brings together 2,312 of these analyses from California and Hawaii. The samples are arranged by general lithologic characteristics and locality. Indexes of stratigraphy, rock name, commercial uses, and minor elements are provided. The sedimentary rocks are classified into groups and into categories according to the chemical analyses. The groups (A through F2) are defined by a system similar to that proposed by Brian Mason in 1952, in which the main parameters are the three major components of sedimentary rocks: (1) uncombined silica, (2) clay (R203 ? 3Si02 ? nH20), and (3) calcium-magnesium carbonate. The categories are based on the degree of admixture of these three major components with other components, such as sulfate, phos- phate, and iron oxide. Common-rock, mixed-rock, and special-rock categories apply to rocks consisting of 85 percent or more, 50-84 percent, and less than 49 percent, respectively, of the three major components combined. Maps show distribution of sample localities by States; triangular diagrams show the lithologic characteristics and classification groups. Cumulative-frequency curves of each constituent in each classification group of the common-rock and mixed-rock categories are also included. The numerous analyses may not adequately represent the geochemical nature of the rock types and formations of the region because of sampling bias. Maps showing distribution of sample localities indicate that many of the localities are in areas where, for economic or other reasons, special problems attracted interest. Most of the analyzed rocks tended to be fairly simple in composition - mainly mixtures of just two of the three major components or a mixture of these and a fourth component such as phosphate, gypsum, or iron oxide.

Aerated drilling cutting transport analysis in geothermal well

NASA Astrophysics Data System (ADS)

Wakhyudin, Aris; Setiawan, Deni; Dwi Marjuan, Oscar

2017-12-01

Aeratad drilling widely used for geothermal drilling especially when drilled into predicted production zone. Aerated drilling give better performance on preventing lost circulation problem, improving rate of penetration, and avoiding drilling fluid invasion to productive zone. While well is drilled, cutting is produced and should be carried to surface by drilling fluid. Hole problem, especially pipe sticking will occur while the cutting is not lifted properly to surface. The problem will effect on drilling schedule; non-productive time finally result more cost to be spent. Geothermal formation has different characteristic comparing oil and gas formation. Geothermal mainly has igneous rock while oil and gas mostly sedimentary rock. In same depth, formation pressure in geothermal well commonly lower than oil and gas well while formation temperature geothermal well is higher. While aerated drilling is applied in geothermal well, Igneous rock density has higher density than sedimentary rock and aerated drilling fluid is lighter than water based mud hence minimum velocity requirement to transport cutting is larger than in oil/gas well drilling. Temperature and pressure also has impact on drilling fluid (aerated) density. High temperature in geothermal well decrease drilling fluid density hence the effect of pressure and temperature also considered. In this paper, Aerated drilling cutting transport performance on geothermal well will be analysed due to different rock and drilling fluid density. Additionally, temperature and pressure effect on drilling fluid density also presented to merge.

Sedimentary facies analysis of the Mesozoic clastic rocks in Southern Peru (Tacna, 18°S): Towards a paleoenvironmental Redefinition and stratigraphic Reorganization

NASA Astrophysics Data System (ADS)

Alván, Aldo; Jacay, Javier; Caracciolo, Luca; Sánchez, Elvis; Trinidad, Inés

2018-07-01

The Mesozoic rocks of southern Peru comprise a Middle Jurassic to Early Cretaceous sedimentary sequence deposited during a time interval of approximately 34 Myr. In Tacna, these rocks are detrital and constitute the Yura Group (Callovian to Tithonian) and the Hualhuani Formation (Berriasian). Basing on robust interpretation of facies and petrographic analysis, we reconstruct the depositional settings of such units and provide a refined stratigraphic framework. Accordingly, nine types of sedimentary facies and six architectural elements are defined. They preserve the record of a progradational fluvial system, in which two styless regulated the dispersion of sediments: (i) a high-to moderate-sinuosity meandering setting (Yura Group), and a later (ii) incipient braided setting (Hualhuani Formation). The Yura Group (Callovian-Tithonian) represents the onset of floodplain deposits and lateral accretion of point-bar deposits sited on a semi-flat topography. Nonetheless, the progradational sequence was affected by at least two rapid marine ingressions occurred during Middle Callovian and Tithonian times. Such marine ingressions reveal the proximity of a shallow marine setting and incipient carbonate deposition. In response to increase in topographic gradient, the Hualhuani Formation (Berriasian) deposited as extensive multistory sandy channels. The mineralogy of the Mesozoic sediments suggests sediment supplies and intense recycling from a craton interior (i.e. Amazon Craton and/or plutonic sources) located eastward of the study area.

Provenance of sediments from Sumatra, Indonesia

NASA Astrophysics Data System (ADS)

Liebermann, Christof; Hall, Robert; Gough, Amy

2017-04-01

The island of Sumatra is situated at the south-western margin of the Indonesian archipelago. Sumatra is affected by active continental margin volcanism along the Sunda Trench, west of Sumatra as a result of active northeast subduction of the Indian plate under the Eurasian plate. Exposures of the Palaeozoic meta-sedimentary basement are mainly limited in extent to the northeast-southwest trending Barisan Mountain chain. The younger Cenozoic rocks are widespread across Sumatra, but can be grouped into structurally subdivided 'fore-arc', 'intramontane', and 'back-arc' basins. However, the formation of the basins pre-dates the current magmatic arc, thus a classical arc-related generation model can not be applied. The Cenozoic formations are well studied due to hydrocarbon enrichment, but little is known about their provenance history. A comprehensive sedimentary provenance study of the Cenozoic formations can aid in the wider understanding of Sumatran petroleum plays, can contribute to palaeographic reconstruction of western SE Asia, and might help to simplify the overall stratigraphy of Sumatra. This work represents a multi-proxy provenance study of sedimentary rocks from the main Cenozoic basins of Sumatra, alongside sediment from present-day river systems. The project refines the provenance in two ways: first, by studying the heavy mineral assemblages of the targeted formations, and secondly, by U-Pb detrital zircon dating using LA-ICP-MS to identify the age-range of the potential sediment sources. Preliminary U-Pb zircon age-data of >1500 concordant grains (10% discordant cut-off), heavy mineral compositions, and thin section analysis from two fieldwork seasons indicate a mixed provenance model, with a proximal igneous source, and mature basement rocks. An increase of the proximal signature in Lower-Miocene strata indicated by the occurrence of unstable heavy mineral phases such as apatite, and clinopyroxene suggests a major change of the source at the Oligocene-Miocene boundary. This can be interpreted as a pulse in the uplift of the Barisan Mountains. The presence of volcanic quartz in thin section supports this hypothesis. On the contrary, older sedimentary strata are characterised by ultra-stable heavy minerals such as zircon, tourmaline, and rutile; the presence of garnet in both pre-, and post-uplift affected strata indicates a contribution from metamorphic basement rocks, either from the local Sumatran basement or the Malay-Peninsula. Detrital zircon ages as old as Archean are present in all sedimentary formations; a prominent Triassic age group can be correlated with the Main Range Province granitoids reported from the Malay-Peninsula. It is noteworthy that zircon age spectra from Sumatra lack some diagnostic age groups commonly found in central- and western SE Asia, such as Cretaceous ages, correlated with igneous rock in the Schwaner Mountains, SW Borneo. The analysis of modern river sands suggests that the current sedimentary fluvial systems are mainly sourced from the recent Barisan-related volcanic arc. Zircon age patterns of the modern river sands resemble the populations found in the sedimentary strata, whereas, the heavy mineral composition is highly diluted by the recent igneous sources.

Hydrogeologic framework of fractured sedimentary rock, Newark Basin, New Jersey

USGS Publications Warehouse

Lacombe, Pierre J.; Burton, William C.

2010-01-01

The hydrogeologic framework of fractured sedimentary bedrock at the former Naval Air Warfare Center (NAWC), Trenton, New Jersey, a trichloroethylene (TCE)-contaminated site in the Newark Basin, is developed using an understanding of the geologic history of the strata, gamma-ray logs, and rock cores. NAWC is the newest field research site established as part of the U.S. Geological Survey Toxic Substances Hydrology Program, Department of Defense (DoD) Strategic Environmental Research and Development Program, and DoD Environmental Security Technology Certification Program to investigate contaminant remediation in fractured rock. Sedimentary bedrock at the NAWC research site comprises the Skunk Hollow, Byram, and Ewing Creek Members of the Lockatong Formation and Raven Rock Member of the Stockton Formation. Muds of the Lockatong Formation that were deposited in Van Houten cycles during the Triassic have lithified to form the bedrock that is typical of much of the Newark Basin. Four lithotypes formed from the sediments include black, carbon-rich laminated mudstone, dark-gray laminated mudstone, light-gray massive mudstone, and red massive mudstone. Diagenesis, tectonic compression, off-loading, and weathering have altered the rocks to give some strata greater hydraulic conductivity than other strata. Each stratum in the Lockatong Formation is 0.3 to 8 m thick, strikes N65 degrees E, and dips 25 degrees to 70 degrees NW. The black, carbon-rich laminated mudstone tends to fracture easily, has a relatively high hydraulic conductivity and is associated with high natural gamma-ray count rates. The dark-gray laminated mudstone is less fractured and has a lower hydraulic conductivity than the black carbon-rich laminated mudstone. The light-gray and the red massive mudstones are highly indurated and tend to have the least fractures and a low hydraulic conductivity. The differences in gamma-ray count rates for different mudstones allow gamma-ray logs to be used to correlate and delineate the lithostratigraphy from multiple wells. Gamma-ray logs and rock cores were correlated to develop a 13-layer gamma-ray stratigraphy and 41-layer lithostratigraphy throughout the fractured sedimentary rock research site. Detailed hydrogeologic framework shows that black carbon-rich laminated mudstones are the most hydraulically conductive. Water-quality and aquifer-test data indicate that groundwater flow is greatest and TCE contamination is highest in the black, carbon- and clay-rich laminated mudstones. Large-scale groundwater flow at the NAWC research site can be modeled as highly anisotropic with the highest component of permeability occurring along bedding planes.

Porous media of the Red River Formation, Williston Basin, North Dakota: a possible Sedimentary Enhanced Geothermal System

NASA Astrophysics Data System (ADS)

Hartig, Caitlin M.

2018-01-01

Fracture-stimulated enhanced geothermal systems (EGS) can be developed in both crystalline rocks and sedimentary basins. The Red River Formation (Ordovician) is a viable site for development of a sedimentary EGS (SEGS) because the formation temperatures exceed 140 °C and the permeability is 0.1-38 mD; fracture stimulation can be utilized to improve permeability. The spatial variations of the properties of the Red River Formation were analyzed across the study area in order to understand the distribution of subsurface formation temperatures. Maps of the properties of the Red River Formation-including depth to the top of the formation, depth to the bottom of the formation, porosity, geothermal gradient, heat flow, and temperature-were produced by the Kriging interpolation method in ArcGIS. In the future, these results may be utilized to create a reservoir simulation model of an SEGS in the Red River Formation; the purpose of this model would be to ascertain the thermal response of the reservoir to fracture stimulation.

Geologic Map of the Eastern Three-Quarters of the Cuyama 30' x 60' Quadrangle, California

USGS Publications Warehouse

Kellogg, Karl S.; Minor, Scott A.; Cossette, Pamela M.

2008-01-01

The map area encompasses a large part of the western Transverse Ranges and southern Coast Ranges of southern California. The San Andreas fault (SAF) cuts the northern part of the map. The area south of the SAF, about 80 percent of the map area, encompasses several distinct tectonic blocks bounded by major thrust or reverse faults, including the Santa Ynez fault, Big Pine fault (and structurally continuous Pine Mountain fault), Tule Creek fault, Nacimiento fault, Ozena fault, Munson Creek fault, Morales fault, and Frazier Mountain Thrust System. Movement on these faults is as old as Miocene and some faults may still be active. In addition, the Paleocene Sawmill Mountain Thrust south of the SAF and the Pastoria Thrust north of the SAF place Cretaceous and older crystalline rocks above Pelona Schist (south of the SAF) and Rand Schist (north of the SAF). South of the SAF, each tectonic block contains a unique stratigraphy, reflecting either large-scale movement on bounding faults or different depositional environments within each block. On Mount Pinos and Frazier Mountain, intrusive and metamorphic rocks as old as Mesoproterozoic, but including voluminous Cretaceous granitoid rocks, underlie or are thrust above non-marine sedimentary rocks as old as Miocene. Elsewhere, marine and non-marine sedimentary rocks are as old as Cretaceous, dominated by thick sequences of both Eocene and Cretaceous marine shales and sandstones. Middle Miocene to early Oligocene volcanic rocks crop out in the Caliente Hills (part of Caliente Formation) and south of Mount Pinos (part of the Plush Ranch Formation). Fault-bounded windows of Jurassic Franciscan Complex ophiolitic rocks are evident in the southwest corner of the area. North of the SAF, marine and non-marine sedimentary rocks as old as Eocene and Miocene volcanic rocks overlie a crystalline basement complex. Basement rocks include Cretaceous intrusive rocks that range from monzogranite to diorite, and Jurassic to late Paleozoic intrusive and metamorphic rocks. The Jurassic to late Paleozoic intrusive rocks include diorite, gabbro, and ultramafic rocks, and the metasedimentary rocks include marble, quartzite, schist, and gneiss.

Deep-sea fan deposition of the lower Tertiary Orca Group, eastern Prince William Sound, Alaska

USGS Publications Warehouse

Winkler, Gary R.

1976-01-01

The Orca Group is a thick, complexly deformed, sparsely fossiliferous sequence of flysch-like sedimentary and tholeiitic volcanic rocks of middle or late Paleocene age that crops out over an area of. roughly 21,000 km2 in the Prince William Sound region and the adjacent Chugach Mountains. The Orca Group also probably underlies a large part of the Gulf of Alaska Tertiary province and the continental shelf south of the outcrop belt; coextensive rocks to the southwest on Kodiak Island are called the Ghost Rocks and Sitkalidak Formations. The Orca Group was pervasively faulted, tightly folded, and metamorphosed regionally to laumontite and prehnite-pumpellyite facies prior to, and perhaps concurrently with, intrusion of early Eocene granodiorite and quartz monzonite plutons. In eastern Prince William Sound, 95% of the Orca sedimentary rocks are interbedded feldspathic and lithofeldspathic sandstone, siltstone, and mudstone turbidites. Lithic components vary widely in abundance and composition, but labile sedimentary and volcanic grains dominate. A widespread yet minor amount of the mudstone is hemipelagic or pelagic, with scattered foraminifers. Pebbly mudstone with rounded clasts of exotic lithologies and locally conglomerate with angular blocks of deformed sandstone identical to the enclosing matrix are interbedded with the turbidites. Thick and thin tabular bodies of altered tholeiitic basalt are locally and regionally conformable with the sedimentary rocks, and constitute 15-20% of Orca outcrops in eastern Prince William Sound. The basalt consists chiefly of pillowed and nonpillowed flows, but also includes minor pillow breccia, tuff, and intrusive rocks. Nonvolcanic turbidites are interbedded with the basalt; lenticular bioclastic limestone, red and green mudstone, chert, and conglomerate locally overlie the basalt, but are supplanted upward by turbidites. From west to east, basalts within the Orca Group become increasingly fragmental and amygdaloidal. Such textural changes probably indicate shallower water to the east. A radial distribution of paleocurrents and distinctive associations of turbidite facies within the sedimentary rocks suggest that the Orca Group in eastern Prince William Sound was deposited on a westward-sloping, complex deep-sea fan. Detritus was derived primarily from 'tectonized' sedimentary, volcanic, and plutonic rocks. Coeval submarine volcanism resulted in intercalation of basalt within prisms of terrigenous sediment.

Geology of the Anderson Mesa quadrangle, Colorado

USGS Publications Warehouse

Cater, Fred W.; Withington, C.F.

1953-01-01

The Anderson Mesa quadrangle is one of the eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of the southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteenth quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quarternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-tending folds. Conspicuous among the folds are large anticlines having cores of intrusive slat and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing many thousands of tons. The ore consists of largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Magnetic susceptibilities measured on rocks of the upper Cook Inlet, Alaska

USGS Publications Warehouse

Alstatt, A.A.; Saltus, R.W.; Bruhn, R.L.; Haeussler, Peter J.

2002-01-01

We have measured magnetic susceptibility in the field on most of the geologic rock formations exposed in the upper Cook Inlet near Anchorage and Kenai, Alaska. Measured susceptibilities range from less than our detection limit of 0.01 x 10-3 (SI) to greater than 100 x 10-3 (SI). As expected, mafic igneous rocks have the highest susceptibilities and some sedimentary rocks the lowest. Rocks of the Tertiary Sterling Formation yielded some moderate to high susceptibility values. Although we do not have detailed information on the magnetic mineralogy of the rocks measured here, the higher susceptibilities are sufficient to explain the magnitudes of some short-wavelength aeromagnetic anomalies observed on recent surveys of the upper Cook Inlet.

Sulfur, carbon, hydrogen, and oxygen isotope geochemistry of the Idaho cobalt belt

USGS Publications Warehouse

Johnson, Craig A.; Bookstrom, Arthur A.; Slack, John F.

2012-01-01

Cobalt-copper ± gold deposits of the Idaho cobalt belt, including the deposits of the Blackbird district, have been analyzed for their sulfur, carbon, hydrogen, and oxygen isotope compositions to improve the understanding of ore formation. Previous genetic hypotheses have ranged widely, linking the ores to the sedimentary or diagenetic history of the host Mesoproterozoic sedimentary rocks, to Mesoproterozoic or Cretaceous magmatism, or to metamorphic shearing. The δ34S values are nearly uniform throughout the Blackbird dis- trict, with a mean value for cobaltite (CoAsS, the main cobalt mineral) of 8.0 ± 0.4‰ (n = 19). The data suggest that (1) sulfur was derived at least partly from sedimentary sources, (2) redox reactions involving sulfur were probably unimportant for ore deposition, and (3) the sulfur was probably transported to sites of ore for- mation as H2S. Hydrogen and oxygen isotope compositions of the ore-forming fluid, which are calculated from analyses of biotite-rich wall rocks and tourmaline, do not uniquely identify the source of the fluid; plausible sources include formation waters, metamorphic waters, and mixtures of magmatic and isotopically heavy meteoric waters. The calculated compositions are a poor match for the modified seawaters that form vol- canogenic massive sulfide (VMS) deposits. Carbon and oxygen isotope compositions of siderite, a mineral that is widespread, although sparse, at Blackbird, suggest formation from mixtures of sedimentary organic carbon and magmatic-metamorphic carbon. The isotopic compositions of calcite in alkaline dike rocks of uncertain age are consistent with a magmatic origin. Several lines of evidence suggest that siderite postdated the emplacement of cobalt and copper, so its significance for the ore-forming event is uncertain. From the stable isotope perspective, the mineral deposits of the Idaho cobalt belt contrast with typical VMS and sedimentary exhalative deposits. They show characteristics of deposit types that form in deeper environments and could be related to metamorphic processes or magmatic processes, although the isotopic evidence for magmatic components is relatively weak.

Preliminary Result of Geophysical Some Studieson the Nariinsukhait Coal Deposit

NASA Astrophysics Data System (ADS)

Norov, B.; Purevjav, N.; Roy, D. K., Sr.

2017-12-01

Nariinsukhait coal deposit has a strategic importance on Mongolian national economic development. The deposit is located in Gurvan-tes of the Umnu-gobi province, as 849 km south-west away from Ulaanbaatar. The deposit in geographically, belongs to Gobi Altai region region of the Altai mountain region. The area contains Permian, Cretaceous, Jurassic, Triassic age of sediments. Sediments are red or sedimentary cover on some part of area (Minjin. Ch., Batnyam. D., Rentsendorj. S (Baatarkhuyag. A., Altantsetseg. D., 2015). The coal deposit is located in the center portion of the Nariinsukhait basin. The age of coal hosted sedimentary rock is Jurassic estimated by Paleo-botanic methodology, using examination of a total 59 kind of plants, 288 pollen grains (Baatarkhuyag. A., Altantsetseg. D., 2015). The thickness of coal hosted sedimentary sequence is approximately 1105.5m and named as Orgilohbulag formation. In case of geophysical exploration, preliminary interpretation of the coal basin has been done by 3 geophysical methodologies which commonly applying during exploration stage of coal. The interpretations are given below. Natural Gamma Sonde /NGRS 4140/: use to determine natural gamma activation on rock by radionuclides content (238U; 235U; 232Th; 40K). During measurements well contrasted coal bedding and, value indicate between 0-15cps. And depending on the rock type it has been changed, in case of siltstone, argillite, conglomerate value fluctuated between 15-40cps. However, those rocks natural gamma values are difference little, therefore not showing much contrast between rock types. Formation Density Sonde Version B /FDSB 4036/: The Nariinsukhait coal deposit Open holes and protective pipes of density is 0.5-1.5 g/cm3, 1.2-2.3 g/cm3 respectively. Not well contrasted during measurement due to some of sedimentary rock density range is so low as such sandstone, siltstone, and conglomerate. Therefore, applied resistivity methodology and done interpretation. DLL3 Resistivity Sonde /DLL3 4160/: Resistivity can fluctuations depend upon the compact, porosity, holes satisfaction, cement composition and clay material mixture. Goal has contrast on indicating high value of electrical resistivity comparatively host rock.

Determination of petrophysical properties of sedimentary rocks by optical methods

NASA Astrophysics Data System (ADS)

Korte, D.; Kaukler, D.; Fanetti, M.; Cabrera, H.; Daubront, E.; Franko, M.

2017-04-01

Petrophysical properties of rocks (thermal diffusivity and conductivity, porosity and density) as well as the correlation between them are of great importance for many geoscientific applications. The porosity of the reservoir rocks and their permeability are the most fundamental physical properties with respect to the storage and transmission of fluids, mainly oil characterization. Accurate knowledge of these parameters for any hydrocarbon reservoir is required for efficient development, management, and prediction of future performance of the oilfield. Thus, the porosity and permeability, as well as the chemical composition must be quantified as precisely as possible. This should be done along with the thermal properties, density, conductivity, diffusivity and effusivity that are intimately related with them. For this reason, photothermal Beam Deflection Spectrometry (BDS) technique for determination of materials' thermal properties together with other methods such as Energy Dispersive X-ray Scanning Electron Microscopy (SEM-EDX) for determining the chemical composition and sample structure, as well as optical microscopy to determine the particles size, were applied for characterization of sedimentary rocks. The rocks were obtained from the Andes south flank in the Venezuela's western basin. The validation of BDS applicability for determination of petrophysical properties of three sedimentary rocks of different texture and composition (all from Late Cretaceous associated with the Luna, Capacho and Colón-Mito Juan geological formations) was performed. The rocks' thermal properties were correlated to the microstructures and chemical composition of the examined samples.

Geochemical Specific Characters of the Oil and the Origin of the Oil and Gas Fields

NASA Astrophysics Data System (ADS)

Gottikh, Rimma; Pisotskiy, Bogdan; Plotnikova, Irina

2010-05-01

It is generally assumed that the fluid regime of the basement of ancient platforms is not associated with that of the sedimentary cover. This assumption is mainly due to the substantial time gap between the formation of the crystalline and sedimentary rocks as well as the evolutionary differences between the thermal regime of the interior and the redox potentials of fluid systems. The presence of loosely aggregated zones filled with salt-water solutions, oil or gas in the upper basement is explained by downward fluid flows from sedimentary rocks through tectonic faults into the disintegrated crystalline rocks. The formation of such zones is believed to be due to the crustal stratification due to Earth's pulsation, periodic variations of its rotational rate, hydrogenic deconsolidation, burial of the post-Early Proterozoic disintegration zones, etc. This pattern suggests that the matter and energy exchange between the Earth's spheres in the late stages of the platform development could only take place with the help of magmatic melts and the associated fluids during the tectonomagmatic cycles of the Earth's crust transformation. Gas and liquid hydrocarbon components mainly occur in crystalline basement rocks of ancient platforms penetrated to a depth of more than 3000 m due to deep degassing processes. The traces of the upward migration of fluids are sealed in the geological sequence, including the sedimentary cover, within secondary inclusions of rocks and minerals. The fluids are complex, reduced, multicomponent systems that transport lithophilous, chalcophilous and siderophilous elements. The presence of microelements in the bituminous phase of inclusions indicates that metals mainly occur in the complexes containing organic ligands. During the evolution of the fluid systems under new pressure and temperature conditions, low-solubility substances were separated out of the fluid to form hard bitumen, and the lighter components migrated into the overlying fractured and porous rocks. The high metal content of carbonaceous substances and their compositional variations governed by homogenisation temperatures of the inclusions suggest that they are not the products of the decomposition of oil fields. The constant presence of uranium in the fluid and its differentiation products allows the tracing of the systems' migration ways from the crystalline basement to oil-saturated reservoir zones of the sedimentary cover The known geochemical properties of bitumen and oil - high platinum content, specific distributions of rare earth elements, that are not characteristic of the upper crust formations, as well as 143Nd/144Nd and 87Sr/86Sr isotopic compounds, which are out of balance with the organic matter of sedimentary rocks - suggest that hydrocarbons are accumulated in the presence of cooling high-alkalinity mafite-ultramafite intrusions. This logically corresponds to the distribution of seismic anomalies and magnetic and gravity fields in the consolidated crust below the various petroleum fields (for example, South Tatarstan and Nepsky arches of the Romashkino and Verkhne-Chonskoye oil fields). The acquired geochemical and thermodynamic characteristics of the reduced fluids and their differentiation products from the crystalline basement and the sedimentary cover of the southern Siberian and eastern East European platforms indicate that these were formed outside of the sedimentary cover and that the migration was directed upwards. The analysis of the magmatic evolution on platforms reveals its alkaline trend due to the impeded degassing of magmatic sources at depth and the inflow of new doses of alkaline fluids or melts into them. Further evolution of the zones of partial melting of the substratum led, in the authors' view, to the generation of oil-forming fluids and their transportation into the Earth's upper crust. Their interaction with the surrounding rocks in turn led to the formation of oil accumulations. Thus, oil is the product of the interaction of deep, reduced fluids. Oil, graphite of the Archaean crystalline complexes and hard bitumens are interrelated elements of the evolution of deep, high-enthalpy systems. These large-scale reduced palaeofluid phenomena are obviously related to geodynamic and tectonomagmatic processes. The source of these fluid systems, their impact on the geological environment and its consequences can be determined through additional integrated geochemical studies using the isotopes of heavy elements and through the correlation of the observed potential fields with the structure of the consolidated crust and the sedimentary cover for the identification of geodynamic processes in geophysically inhomogeneous zones of the geological medium.

Barringerite Fe2P from Pyrometamorphic Rocks of the Hatrurim Formation, Israel

NASA Astrophysics Data System (ADS)

Britvin, S. N.; Murashko, M. N.; Vapnik, E.; Polekhovsky, Yu. S.; Krivovichev, S. V.

2017-12-01

The article provides a detailed mineralogical and crystallochemical description (including refinement of the crystal structure) of the first finding of the phosphide class mineral barringerite, Fe2P, from terrestrial pyrometamorphic rocks of the Hatrurim Formation in Israel. The mineral occurs in the association of the so-called paralavas—initially silicate—carbonate sedimentary rocks that remelted during pyrometamorphic processes at a temperature above 1000°C and at a low pressure. Questions on the genesis and crystal chemistry of barringerite are discussed in connection with another polymorphic iron phosphide, allabogdanite (Fe,Ni)2P.

Rocks Are Boring--Aren't They?

ERIC Educational Resources Information Center

Lievesley, Tara

2014-01-01

The new English Curriculum requiring not only the study of sedimentary and igneous rocks but also understanding of fossil formation, is a great opportunity to make this one of the most exciting units any science teacher can present. When an animal or plant dies, it "disappears" completely as it is degraded by a range of organisms. It may…

Use of variations in unit cell length, reflectance and hardness for determining the origin of Fe disulphides in sedimentary rocks

NASA Astrophysics Data System (ADS)

Dill, H. G.; Eberhard, E.; Hartmann, B.

1997-01-01

Fe disulphides are common opaque accessories in sedimentary rocks. Both marcasite and pyrite may shed some light on the depositional environment and help determine the diagenesis of their host rocks. Quantitative ore microscopy (reflectance measurements, Vickers hardness numbers) and X-ray diffraction methods, supplemented with scanning electron microscopy and chemical analyses, were applied to pyrite (and some marcasite) hosted by sedimentary rocks spanning the interval from the Devonian to the Pliocene, and formed in various marine and continental environments. Quantitative ore microscopy of pyrites of sedimentary origin does not seem to be an efficient tool for analyzing the environment owing to the inhomogeneous nature of sulphide aggregates when viewed under the ore microscope, and the variable amounts of minor elements (e.g., As, Ni, and Co) that control the reflectance values (RV) and Vickers hardness numbers (VHN) of the host sulphides. However, such parameters as crystal habit and unit cell length of pyrite, which correlate with FeS x, are useful for environmental analysis. The redox conditions and the presence of organic remains during formation are the main factors determining these crystallographic parameters. Differences in these parameters from those of pure, ideal FeS 2 can be related to substitution of, e.g., wustite in the pyrite lattice, reflecting moderate oxidation (i.e. in the microenvironment). As far as crystal habit and length of the cell edge are concerned, late stage diagenesis is obviously less important than the microenvironment attending initial formation. The environment of deposition (i.e. the macroenvironment) of pyrite-bearing rocks has no influence on the crystal morphology or the length of the unit cell of Fe disulphide. X-ray diffraction measurements demonstrate that this method provides useful evidence on the microenvironment of sulphide precipitation around a single, equant pyrite, as well as around pyritized fossils.

Pliocene transpressional modification of depositional basins by convergent thrusting adjacent to the "Big Bend" of the San Andreas fault: An example from Lockwood Valley, southern California

USGS Publications Warehouse

Kellogg, K.S.; Minor, S.A.

2005-01-01

The "Big Bend" of the San Andreas fault in the western Transverse Ranges of southern California is a left stepping flexure in the dextral fault system and has long been recognized as a zone of relatively high transpression compared to adjacent regions. The Lockwood Valley region, just south of the Big Bend, underwent a profound change in early Pliocene time (???5 Ma) from basin deposition to contraction, accompanied by widespread folding and thrusting. This change followed the recently determined initiation of opening of the northern Gulf of California and movement along the southern San Andreas fault at about 6.1 Ma, with the concomitant formation of the Big Bend. Lockwood Valley occupies a 6-km-wide, fault-bounded structural basin in which converging blocks of Paleoproterozoic and Cretaceous crystalline basement and upper Oligocene and lower Miocene sedimentary rocks (Plush Ranch Formation) were thrust over Miocene and Pliocene basin-fill sedimentary rocks (in ascending order, Caliente Formation, Lockwood Clay, and Quatal Formation). All the pre-Quatal sedimentary rocks and most of the Pliocene Quatal Formation were deposited during a mid-Tertiary period of regional transtension in a crustal block that underwent little clockwise vertical-axis rotation as compared to crustal blocks to the south. Ensuing Pliocene and Quaternary transpression in the Big Bend region began during deposition of the poorly dated Quatal Formation and was marked by four converging thrust systems, which decreased the areal extent of the sedimentary basin and formed the present Lockwood Valley structural basin. None of the thrusts appears presently active. Estimated shortening across the center of the basin was about 30 percent. The fortnerly defined eastern Big Pine fault, now interpreted to be two separate, oppositely directed, contractional reverse or thrust faults, marks the northwestern structural boundary of Lockwood Valley. The complex geometry of the Lockwood Valley basin is similar to other Tertiary structural basins in southern California, such those that underlie Cuyama Valley, the Ridge basin, and the east Ventura basin.

[Interaction of clay minerals with microorganisms: a review of experimental data].

PubMed

Naĭmark, E B; Eroshchev-Shak, V A; Chizhikova, N P; Kompantseva, E I

2009-01-01

A review of publications containing results of experiments on the interaction of microorganisms with clay minerals is presented. Bacteria are shown to be involved in all processes related to the transformation of clay minerals: formation of clays from metamorphic and sedimentary rocks, formation of clays from solutions, reversible transitions of different types of clay minerals, and consolidation of clay minerals into sedimentary rocks. Integration of these results allows to conclude that bacteria reproduced all possible abiotic reactions associated with the clay minerals, these reactions proceed much faster with the bacteria being involved. Thus, bacteria act as a living catalyst in the geochemical cycle of clay minerals. The ecological role of bacteria can be considered as a repetition of a chemical process of the abiotic world, but with the use of organic catalytic innovation.

Raman spectra of carbonaceous materials in a fault zone in the Longmenshan thrust belt, China; comparisons with those of sedimentary and metamorphic rocks

NASA Astrophysics Data System (ADS)

Kouketsu, Yui; Shimizu, Ichiko; Wang, Yu; Yao, Lu; Ma, Shengli; Shimamoto, Toshihiko

2017-03-01

We analyzed micro-Raman spectra of carbonaceous materials (CM) in natural and experimentally deformed fault rocks from Longmenshan fault zone that caused the 2008 Wenchuan earthquake, to characterize degree of disordering of CM in a fault zone. Raman spectral parameters for 12 samples from a fault zone in Shenxigou, Sichuan, China, all show low-grade structures with no graphite. Low crystallinity and δ13C values (-24‰ to -25‰) suggest that CM in fault zone originated from host rocks (Late Triassic Xujiahe Formation). Full width at half maximum values of main spectral bands (D1 and D2), and relative intensities of two subbands (D3 and D4) of CM were variable with sample locations. However, Raman parameters of measured fault rocks fall on established trends of graphitization in sedimentary and metamorphic rocks. An empirical geothermometer gives temperatures of 160-230 °C for fault rocks in Shenxigou, and these temperatures were lower for highly sheared gouge than those for less deformed fault breccia at inner parts of the fault zone. The lower temperature and less crystallinity of CM in gouge might have been caused by the mechanical destruction of CM by severe shearing deformation, or may be due to mixing of host rocks on the footwall. CM in gouge deformed in high-velocity experiments exhibits slight changes towards graphitization characterized by reduction of D3 and D4 intensities. Thus low crystallinity of CM in natural gouge cannot be explained by our experimental results. Graphite formation during seismic fault motion is extremely local or did not occur in the study area, and the CM crystallinity from shallow to deep fault zones may be predicted as a first approximation from the graphitization trend in sedimentary and metamorphic rocks. If that case, graphite may lower the friction of shear zones at temperatures above 300 °C, deeper than the lower part of seismogenic zone.

Mineral remains of early life on Earth? On Mars?

USGS Publications Warehouse

Iberall, Robbins E.; Iberall, A.S.

1991-01-01

The oldest sedimentary rocks on Earth, the 3.8-Ga Isua Iron-Formation in southwestern Greenland, are metamorphosed past the point where organic-walled fossils would remain. Acid residues and thin sections of these rocks reveal ferric microstructures that have filamentous, hollow rod, and spherical shapes not characteristic of crystalline minerals. Instead, they resemble ferric-coated remains of bacteria. Because there are no earlier sedimentary rocks to study on Earth, it may be necessary to expand the search elsewhere in the solar system for clues to any biotic precursors or other types of early life. A study of morphologies of iron oxide minerals collected in the southern highlands during a Mars sample return mission may therefore help to fill in important gaps in the history of Earth's earliest biosphere. -from Authors

Hydrogeologic unit map of the Piedmont and Blue Ridge provinces of North Carolina

USGS Publications Warehouse

Daniel, Charles C.; Payne, R.A.

1990-01-01

The numerous geologic formations and rock types in the Piedmont and Blue Ridge provinces of North Carolina have been grouped into 21 hydrogeologic units on the basis of their water-bearing potential as determined from rock origin, composition, and texture. All major classes of rocks--metamorphic, igneous, and sedimentary--are present, although metamorphic rocks are the most abundant. The origin of the hydrogeologic units is indicated by the rock class or subclass (metaigneous, metavolanic, or metasedimentary). The composition of the igneous, metaigneous, and metavolcanic rocks is designated as felsic, intermediate, or mafic except for the addition in the metavolcanic group of epiclastic rocks and compositionally undifferentiated rocks. Composition is the controlling attribute in the classification of the metasedimentary units of gneiss (mafic or felsic), marble, quartzite. The other metasediments are designated primarily on the basis of texture (grain size, degree of metamorphism, and development of foliation). Sedimentary rocks occur in the Piedmont in several downfaulted basins. A computerized data file containing records from more than 6,200 wells was analyzed to determine average well yields in each of the 21 units. The well yields were adjusted to an average well depth of 154 feet and an average diameter of 6 inches, the average of all wells in the data set, to remove the variation in well yield attributed to differences in depth and diameter. Average yields range from a high of 23.6 gallons per minute for schist to a low 11.6 gallons per minute for sedimentary rocks of Triassic age.

Venera 13 and venera 14: sedimentary rocks on venus?

PubMed

Florensky, C P; Basilevsky, A T; Kryuchkov, V P; Kusmin, R O; Nikolaeva, O V; Pronin, A A; Chernaya, I M; Tyuflin, Y S; Selivanov, A S; Naraeva, M K; Ronca, L B

1983-07-01

Venera 13 and Venera 14 transmitted almost complete panoramic views of their landing sites. Analyses of the photographs show the presence of rock formations undergoing geomorphic degradation. The formations display ripple marks, thin layering, differential erosion, and curvilinear fracturings. Some of them are interpreted as lithified clastic sediments. The lithification could have taken place at depth or at the surface, resulting in a type of duricrust. The origin of the sediments is unknown but could be aeolian, volcanic, or related to impacts or to turbidity currents.

Diffusive transport and reaction in clay rocks: A storage (nuclear waste, CO2, H2), energy (shale gas) and water quality issue

NASA Astrophysics Data System (ADS)

Charlet, Laurent; Alt-Epping, Peter; Wersin, Paul; Gilbert, Benjamin

2017-08-01

Clay rocks are low permeability sedimentary formations that provide records of Earth history, influence the quality of water resources, and that are increasingly used for the extraction or storage of energy resources and the sequestration of waste materials. Informed use of clay rock formations to achieve low-carbon or carbon-free energy goals requires the ability to predict the rates of diffusive transport processes for chemically diverse dissolved and gaseous species over periods up to thousands of years. We survey the composition, properties and uses of clay rock and summarize fundamental science challenges in developing confident conceptual and quantitative gas and solute transport models.

Contact zone permeability at intrusion boundaries: New results from hydraulic testing and geophysical logging in the Newark Rift Basin, New York, USA

USGS Publications Warehouse

Matter, J.M.; Goldberg, D.S.; Morin, R.H.; Stute, M.

2006-01-01

Hydraulic tests and geophysical logging performed in the Palisades sill and the underlying sedimentary rocks in the NE part of the Newark Rift Basin, New York, USA, confirm that the particular transmissive zones are localized within the dolerite-sedimentary rock contact zone and within a narrow interval below this contact zone that is characterized by the occurrence of small layers of chilled dolerite. Transmissivity values determined from fluid injection, aquifer testing, and flowmeter measurements generally fall in the range of 8.1E-08 to 9.95E-06 m2/s and correspond to various scales of investigation. The analysis of acoustic and optical BHTV images reveals two primary fracture sets within the dolerite and the sedimentary rocks - subhorizontal fractures, intersected by subvertical ones. Despite being highly fractured either with subhorizontal, subvertical or both fracture populations, the dolerite above and the sedimentary rocks below the contact zone and the zone with the layers of chilled dolerite are significantly less conductive. The distribution of the particular conductive intervals is not a function of the two dominant fracture populations or their density but rather of the intrusion path of the sill. The intrusion caused thermal fracturing and cracking of both formations, resulting in higher permeability along the contact zone. ?? Springer-Verlag 2005.

Geology of the Gateway quadrangle, Mesa county Colorado

USGS Publications Warehouse

Cater, Fred W.

1953-01-01

The Gateway quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by hih-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as "Uruvan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Egnar quadrangle, Dolores and San Miguel counties, Colorado

USGS Publications Warehouse

Cater, Fred W.; Bush, A.L.; Bell, Henry

1954-01-01

The Egnar quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by hih-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as "Uruvan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Hamm Canyon quadrangle, Colorado

USGS Publications Warehouse

Cater, Fred W.

1953-01-01

The Hamm Canyon quadrangle is on eof eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Davis Mesa quadrangle, Colorado

USGS Publications Warehouse

Cater, Fred W.; Bryner, Leonid

1953-01-01

The Davis Mesa quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by hih-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as "Uruvan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Joe Davis Hill quadrangle, Dolores and San Miguel counties, Colorado

USGS Publications Warehouse

Cater, Fred W.; Bell, Henry

1953-01-01

The Joe Davis Hill quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by hih-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Gypsum Gap quadrangle, Colorado

USGS Publications Warehouse

Cater, Fred W.

1953-01-01

The Gypsum Gap quadrangle is one eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comparative study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through a arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The core consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Pine Mountain quadrangle, Mesa county, Colorado

USGS Publications Warehouse

Cater, Fred W.

1953-01-01

The Pine Mountain quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from Paleozoic to Quaternary. Over mush of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confines to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in sizer from irregular masses containing only a few ton of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Naturita NW quadrangle, Colorado

USGS Publications Warehouse

Cater, Fred W.; Vogel, J.D.

1953-01-01

The Naturita NW quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles were mapped by the U.S. Geological Survey on behalf of the U.S. Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear ro be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Calamity Mesa quadrangle, Mesa county, Colorado

USGS Publications Warehouse

Cater, Fred W.; Stager, Harold K.

1953-01-01

The Calamity Mesa quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks the range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Horse Range Mesa quadrangle, Colorado

USGS Publications Warehouse

Cater, Fred W.; Bush, A.L.; Bell, Henry; Withington, C.F.

1953-01-01

The Horse Range Mesa quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of the quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary strictures in sandstones of favorable composition.

Geology of Bull Canyon quadrangle, Montrose and San Miguel counties, Colorado

USGS Publications Warehouse

Cater, Fred W.

1953-01-01

The Bull Canyon quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite depots. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tones. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to be related to certain sedimentary structures in sandstones of favorable composition.

Geology of the Uravan quadrangle, Montrose county, Colorado

USGS Publications Warehouse

Cater, Fred W.; Butler, A.P.; McKay, E.J.; Boardman, Robert L.

1954-01-01

The Uravan quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of the southwestern Colorado. The geology of these quadrangles was mapped by the U.S. Geological Survey for the Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear to the related to certain sedimentary structures in sandstones of favorable composition.

A refined model of sedimentary rock cover in the southeastern part of the Congo basin from GOCE gravity and vertical gravity gradient observations

NASA Astrophysics Data System (ADS)

Martinec, Zdeněk; Fullea, Javier

2015-03-01

We aim to interpret the vertical gravity and vertical gravity gradient of the GOCE-GRACE combined gravity model over the southeastern part of the Congo basin to refine the published model of sedimentary rock cover. We use the GOCO03S gravity model and evaluate its spherical harmonic representation at or near the Earth's surface. In this case, the gradiometry signals are enhanced as compared to the original measured GOCE gradients at satellite height and better emphasize the spatial pattern of sedimentary geology. To avoid aliasing, the omission error of the modelled gravity induced by the sedimentary rocks is adjusted to that of the GOCO03S gravity model. The mass-density Green's functions derived for the a priori structure of the sediments show a slightly greater sensitivity to the GOCO03S vertical gravity gradient than to the vertical gravity. Hence, the refinement of the sedimentary model is carried out for the vertical gravity gradient over the basin, such that a few anomalous values of the GOCO03S-derived vertical gravity gradient are adjusted by refining the model. We apply the 5-parameter Helmert's transformation, defined by 2 translations, 1 rotation and 2 scale parameters that are searched for by the steepest descent method. The refined sedimentary model is only slightly changed with respect to the original map, but it significantly improves the fit of the vertical gravity and vertical gravity gradient over the basin. However, there are still spatial features in the gravity and gradiometric data that remain unfitted by the refined model. These may be due to lateral density variation that is not contained in the model, a density contrast at the Moho discontinuity, lithospheric density stratifications or mantle convection. In a second step, the refined sedimentary model is used to find the vertical density stratification of sedimentary rocks. Although the gravity data can be interpreted by a constant sedimentary density, such a model does not correspond to the gravitational compaction of sedimentary rocks. Therefore, the density model is extended by including a linear increase in density with depth. Subsequent L2 and L∞ norm minimization procedures are applied to find the density parameters by adjusting both the vertical gravity and the vertical gravity gradient. We found that including the vertical gravity gradient in the interpretation of the GOCO03S-derived data reduces the non-uniqueness of the inverse gradiometric problem for density determination. The density structure of the sedimentary formations that provide the optimum predictions of the GOCO03S-derived gravity and vertical gradient of gravity consists of a surface density contrast with respect to surrounding rocks of 0.24-0.28 g/cm3 and its decrease with depth of 0.05-0.25 g/cm3 per 10 km. Moreover, the case where the sedimentary rocks are gravitationally completely compacted in the deepest parts of the basin is supported by L∞ norm minimization. However, this minimization also allows a remaining density contrast at the deepest parts of the sedimentary basin of about 0.1 g/cm3.

Combined Rock Magnetic and Dielectric studies applied to stratigraphic and archeological problems in Venezuela

NASA Astrophysics Data System (ADS)

Costanzo-Alvarez, V.; Aldana, M.; Suarez, N.

2007-05-01

In the last few years the paleomagnetism research group, at the Universidad Simon Bolivar in Caracas (Venezuela), has undertaken combined studies of rock magnetism (e.g. natural magnetic remanence, magnetic susceptibility, hysteresis parameters etc.) and dielectric properties (maximum current depolarization temperatures and average activation energies) in Cretaceous and Paleogene sedimentary sequences from eastern and western Venezuela. Our main goal has been to find new ways of defining physical markers, in fossil- poor sedimentary rocks, for stratigraphic correlations. Magneto/dielectric characterizations of these rocks have proved also useful identifying lithological discontinuities and paleoenvironmental changes. More recently these two-fold technique have been extended to archeological materials (potsherds) from a series of Venezuelan islands, in order to track down clay sources and find out about different stages of pottery craftsmanship. Magneto/Dielectric characterization of archeological potsherds seems to allow the tracing of their provenance from various mainland prehistoric settlements of distinct Venezuelan amerindian groups. In this paper we present a comprehensive review of this research applied to a contact between two sedimentary formations in eastern Venezuela (Cretaceous Chimana/Querecual) and a number of pottery samples with diverse stylistic features excavated in a single archeological site from Los Roques islands.

Heterogeneous arsenic enrichment in meta-sedimentary rocks in central Maine, United States.

PubMed

O'Shea, Beth; Stransky, Megan; Leitheiser, Sara; Brock, Patrick; Marvinney, Robert G; Zheng, Yan

2015-02-01

Arsenic is enriched up to 28 times the average crustal abundance of 4.8 mg kg(-1) for meta-sedimentary rocks of two adjacent formations in central Maine, USA where groundwater in the bedrock aquifer frequently contains elevated As levels. The Waterville Formation contains higher arsenic concentrations (mean As 32.9 mg kg(-1), median 12.1 mg kg(-1), n=38) than the neighboring Vassalboro Group (mean As 19.1 mg kg(-1), median 6.0 mg kg(-1), n=38). The Waterville Formation is a pelitic meta-sedimentary unit with abundant pyrite either visible or observed by scanning electron microprobe. Concentrations of As and S are strongly correlated (r=0.88, p<0.05) in the low grade phyllite rocks, and arsenic is detected up to 1944 mg kg(-1) in pyrite measured by electron microprobe. In contrast, statistically significant (p<0.05) correlations between concentrations of As and S are absent in the calcareous meta-sediments of the Vassalboro Group, consistent with the absence of arsenic-rich pyrite in the protolith. Metamorphism converts the arsenic-rich pyrite to arsenic-poor pyrrhotite (mean As 1 mg kg(-1), n=15) during de-sulfidation reactions: the resulting metamorphic rocks contain arsenic but little or no sulfur indicating that the arsenic is now in new mineral hosts. Secondary weathering products such as iron oxides may host As, yet the geochemical methods employed (oxidative and reductive leaching) do not conclusively indicate that arsenic is associated only with these. Instead, silicate minerals such as biotite and garnet are present in metamorphic zones where arsenic is enriched (up to 130.8 mg kg(-1) As) where S is 0%. Redistribution of already variable As in the protolith during metamorphism and contemporary water-rock interaction in the aquifers, all combine to contribute to a spatially heterogeneous groundwater arsenic distribution in bedrock aquifers. Copyright © 2014 Elsevier B.V. All rights reserved.

Heterogeneous arsenic enrichment in meta-sedimentary rocks in central Maine, United States

PubMed Central

O’Shea, Beth; Stransky, Megan; Leitheiser, Sara; Brock, Patrick; Marvinney, Robert G.; Zheng, Yan

2014-01-01

Arsenic is enriched up to 28 times the average crustal abundance of 4.8 mg kg−1 for meta-sedimentary rocks of two adjacent formations in central Maine, USA where groundwater in the bedrock aquifer frequently contains elevated As levels. The Waterville Formation contains higher arsenic concentrations (mean As 32.9 mg kg−1, median 12.1 mg kg−1, n=36) than the neighboring Vassalboro Group (mean As 19.1 mg kg−1, median 6.0 mg kg−1, n=36). The Waterville Formation is a pelitic meta-sedimentary unit with abundant pyrite either visible or observed by scanning electron microprobe. Concentrations of As and S are strongly correlated (r=0.88, p<0.05) in the low grade phyllite rocks, and arsenic is detected up to 1,944 mg kg−1 in pyrite measured by electron microprobe. In contrast, statistically significant (p<0.05) correlations between concentrations of As and S are absent in the calcareous meta-sediments of the Vassalboro Group, consistent with the absence of arsenic-rich pyrite in the protolith. Metamorphism converts the arsenic-rich pyrite to arsenic-poor pyrrhotite (mean As 1 mg kg−1, n=15) during de-sulfidation reactions: the resulting metamorphic rocks contain arsenic but little or no sulfur indicating that the arsenic is now in new mineral hosts. Secondary weathering products such as iron oxides may host As, yet the geochemical methods employed (oxidative and reductive leaching) do not conclusively indicate that arsenic is associated only with these. Instead, silicate minerals such as biotite and garnet are present in metamorphic zones where arsenic is enriched (up to 130.8 mg kg−1 As) where S is 0%. Redistribution of already variable As in the protolith during metamorphism and contemporary water-rock interaction in the aquifers, all combine to contribute to a spatially heterogeneous groundwater arsenic distribution in bedrock aquifers. PMID:24861530

Paleoproterozoic andesitic volcanism in the southern Amazonian craton (northern Brazil); lithofacies analysis and geodynamic setting

NASA Astrophysics Data System (ADS)

Roverato, Matteo; Juliani, Caetano; Capra, Lucia; Dias Fernandes, Carlos Marcelo

2016-04-01

Precambrian volcanism played an important role in geological evolution and formation of new crust. Most of the literature on Precambrian volcanic rocks describes settings belonging to subaqueous volcanic systems. This is likely because subaerial volcanic rocks in Proterozoic and Archean volcano-sedimentary succession are poorly preserved due to erosive/weathering processes. The late Paleoproterozoic Sobreiro Formation (SF) here described, seems to be one of the rare exceptions to the rule and deserves particular attention. SF represents the subaerial expression of an andesitic magmatism that, linked with the upper felsic Santa Rosa F., composes the Uatumã Group. Uatumã Group is an extensive magmatic event located in the Xingú region, southwestern of Pará state, Amazonian Craton (northern Brazil). The Sobreiro volcanism is thought to be related to an ocean-continent convergent margin. It is characterized by ~1880 Ma well-preserved calc-alkaline basaltic/andesitic to andesitic lava flows, pyroclastic rocks and associated reworked successions. The superb preservation of its rock-textures allowed us to describe in detail a large variety of volcaniclastic deposits. We divided them into primary and secondary, depending if they result from a direct volcanic activity (pyroclastic) or reworked processes. Our study reinforces the importance of ancient volcanic arcs and rocks contribution to the terrestrial volcaniclastic sedimentation and evolution of plate tectonics. The volcanic activity that produced pyroclastic rocks influenced the amount of detritus shed into sedimentary basins and played a major role in the control of sedimentary dispersal patterns. This study aims to provide, for the first time, an analysis of the physical volcanic processes for the subaerial SF, based in field observation, lithofacies analysis, thin section petrography and less geochemical data. The modern volcanological approach here used can serve as a model about the evolution of Precambrian volcano-sedimentary basins. Our approach permits to better identify different processes operating on volcanic edifices and to constrain the depositional environment and thus geodynamic setting of Precambrian continental volcanic belts. Acknowledgments: We acknowledge CAPES/CNPq project n° 402564/2012-0 (Programa Ciências sem Fronteiras), CNPq/CT-Mineral (Proc. 550.342/2011-7) and INCT-Geociam (573733/2008-2) - CNPq/MCT/FAPESPA/PETROBRAS.

Geochemistry of the Nsuta Mn deposit in Ghana: Implications for the Paleoproterozoic atmosphere and ocean chemistry

NASA Astrophysics Data System (ADS)

Goto, K. T.; Ito, T.; Suzuki, K.; Kashiwabara, T.; Takaya, Y.; Shimoda, G.; Nozaki, T.; Kiyokawa, S.; Tetteh, G. M.; Nyame, F. K.

2013-12-01

Oxygenation of the atmosphere and oceans has influenced the evolution of ocean chemistry and diversification of early life. A number of large manganese (Mn) deposits are distributed in the Paleoproterozoic sedimentary successions that were formed during the great oxidation event (GOE) around 2.4-2.2 Ga (Meynard, 2010). Due to the high redox potential of Mn, occurrences of Mn deposits have been regarded as important evidence for a highly oxidized environment during the Paleoproterozoic (Kirschvink et al., 2000). Furthermore, because Mn oxides strongly adsorb various elements, including bioessential elements such as Mo, formation of large Mn deposits may have affected the seawater chemical composition and ecology during the Paleoproterozoic. However, the genesis of each Mn deposit is poorly constrained, and the relationships among the formation of Mn deposits, the evolution of atmospheric and ocean chemistry, and the diversification of early life are still ambiguous. In this study, we report the Re-Os isotope compositions, rare earth element (REE) compositions, and abundance of manganophile elements in the Mn carbonate ore and host sedimentary rock samples collected from the Nsuta Mn deposit of the Birimian Supergroup, Ghana. The Nsuta deposit is one of the largest Paleoproterozoic Mn deposits, although its genesis remains controversial (Melcher et al., 1995; Mucke et al., 1999). The composite Re-Os isochron age (2149 × 130 Ma) of the Mn carbonate and sedimentary rock samples was consistent with the depositional age of the sedimentary rocks (~2.2 Ga) presumed from the U-Pb zircon age of volcanic rocks (Hirdes and Davis, 1998), suggesting that the timing of Mn ore deposition was almost equivalent to the host rock sedimentation. The PAAS-normalized REE pattern showed a positive Eu anomaly in all samples and a positive Ce anomaly only in the Mn carbonate ore. These REE patterns indicate the possible contribution of Eu-enriched fluids derived from hydrothermal activity and Ce enrichment due to the oxidation of Ce(III) by Mn(IV) during an ore formation. Among the manganophile elements, merely Mo is enriched in the Mn carbonate ore compared with the host sedimentary rocks. The profile of manganophile elements was similar to that of modern hydrothermal Mn oxide (Kuhn et al., 2003), although the exact Mo concentration was much lower. These geochemical lines of evidence provide the following plausible genetic model for the Nsuta deposits: (1) Mn(II) was derived from hydrothermal vents, (2) Mn(II) was oxidized to Mn(IV) oxide by the oxygenated seawater, (3) the precipitation of Mn oxide is almost concurrent with the deposition of the host sedimentary rocks, (4) Mn oxide was diagenetically transformed to be a Mn carbonate ore. The geochemical features of the Nsuta deposits suggest that, as in the present oxic oceans, Mn oxide was a potential sink for several trace elements in the Paleoproterozoic oceans. The low-Mo concentration in the Mn carbonate ore probably reflects the large difference between the chemical compositions of Paleoproterozoic and present seawater, implying the prevalence of reduced marine conditions even during the GOE (Scott et al., 2008)

Diagenesis and clay mineral formation at Gale Crater, Mars

PubMed Central

Bridges, J C; Schwenzer, S P; Leveille, R; Westall, F; Wiens, R C; Mangold, N; Bristow, T; Edwards, P; Berger, G

2015-01-01

The Mars Science Laboratory rover Curiosity found host rocks of basaltic composition and alteration assemblages containing clay minerals at Yellowknife Bay, Gale Crater. On the basis of the observed host rock and alteration minerals, we present results of equilibrium thermochemical modeling of the Sheepbed mudstones of Yellowknife Bay in order to constrain the formation conditions of its secondary mineral assemblage. Building on conclusions from sedimentary observations by the Mars Science Laboratory team, we assume diagenetic, in situ alteration. The modeling shows that the mineral assemblage formed by the reaction of a CO2-poor and oxidizing, dilute aqueous solution (Gale Portage Water) in an open system with the Fe-rich basaltic-composition sedimentary rocks at 10–50°C and water/rock ratio (mass of rock reacted with the starting fluid) of 100–1000, pH of ∽7.5–12. Model alteration assemblages predominantly contain phyllosilicates (Fe-smectite, chlorite), the bulk composition of a mixture of which is close to that of saponite inferred from Chemistry and Mineralogy data and to that of saponite observed in the nakhlite Martian meteorites and terrestrial analogues. To match the observed clay mineral chemistry, inhomogeneous dissolution dominated by the amorphous phase and olivine is required. We therefore deduce a dissolving composition of approximately 70% amorphous material, with 20% olivine, and 10% whole rock component. PMID:26213668

Diagenesis and clay mineral formation at Gale Crater, Mars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bridges, J. C.; Schwenzer, S. P.; Leveille, R.

The Mars Science Laboratory rover Curiosity found host rocks of basaltic composition and alteration assemblages containing clay minerals at Yellowknife Bay, Gale Crater. On the basis of the observed host rock and alteration minerals, we present results of equilibrium thermochemical modeling of the Sheepbed mudstones of Yellowknife Bay in order to constrain the formation conditions of its secondary mineral assemblage. Building on conclusions from sedimentary observations by the Mars Science Laboratory team, we assume diagenetic, in situ alteration. The modeling shows that the mineral assemblage formed by the reaction of a CO₂-poor and oxidizing, dilute aqueous solution (Gale Portage Water)more » in an open system with the Fe-rich basaltic-composition sedimentary rocks at 10–50°C and water/rock ratio (mass of rock reacted with the starting fluid) of 100–1000, pH of ~7.5–12. Model alteration assemblages predominantly contain phyllosilicates (Fe-smectite, chlorite), the bulk composition of a mixture of which is close to that of saponite inferred from Chemistry and Mineralogy data and to that of saponite observed in the nakhlite Martian meteorites and terrestrial analogues. To match the observed clay mineral chemistry, inhomogeneous dissolution dominated by the amorphous phase and olivine is required. We therefore deduce a dissolving composition of approximately 70% amorphous material, with 20% olivine, and 10% whole rock component.« less

Chemical variations in Yellowknife Bay formation sedimentary rocks analyzed by ChemCam on board the Curiosity rover on Mars

USGS Publications Warehouse

Mangold, Nicolas; Forni, Olivier; Dromart, G.; Stack, K.M.; Wiens, Roger C.; Gasnault, Olivier; Sumner, Dawn Y.; Nachon, Marion; Meslin, Pierre-Yves; Anderson, Ryan B.; Barraclough, Bruce; Bell, J.F.; Berger, G.; Blaney, D.L.; Bridges, J.C.; Calef, F.; Clark, Brian R.; Clegg, Samuel M.; Cousin, Agnes; Edgar, L.; Edgett, Kenneth S.; Ehlmann, B.L.; Fabre, Cecile; Fisk, M.; Grotzinger, John P.; Gupta, S.C.; Herkenhoff, Kenneth E.; Hurowitz, J.A.; Johnson, J. R.; Kah, Linda C.; Lanza, Nina L.; Lasue, Jeremie; Le Mouélic, S.; Lewin, Eric; Malin, Michael; McLennan, Scott M.; Maurice, S.; Melikechi, Noureddine; Mezzacappa, Alissa; Milliken, Ralph E.; Newsome, H.L.; Ollila, A.; Rowland, Scott K.; Sautter, Violaine; Schmidt, M.E.; Schroder, S.; D'Uston, C.; Vaniman, Dave; Williams, R.A.

2015-01-01

The Yellowknife Bay formation represents a ~5 m thick stratigraphic section of lithified fluvial and lacustrine sediments analyzed by the Curiosity rover in Gale crater, Mars. Previous works have mainly focused on the mudstones that were drilled by the rover at two locations. The present study focuses on the sedimentary rocks stratigraphically above the mudstones by studying their chemical variations in parallel with rock textures. Results show that differences in composition correlate with textures and both manifest subtle but significant variations through the stratigraphic column. Though the chemistry of the sediments does not vary much in the lower part of the stratigraphy, the variations in alkali elements indicate variations in the source material and/or physical sorting, as shown by the identification of alkali feldspars. The sandstones contain similar relative proportions of hydrogen to the mudstones below, suggesting the presence of hydrous minerals that may have contributed to their cementation. Slight variations in magnesium correlate with changes in textures suggesting that diagenesis through cementation and dissolution modified the initial rock composition and texture simultaneously. The upper part of the stratigraphy (~1 m thick) displays rocks with different compositions suggesting a strong change in the depositional system. The presence of float rocks with similar compositions found along the rover traverse suggests that some of these outcrops extend further away in the nearby hummocky plains.

Diagenesis and clay mineral formation at Gale Crater, Mars

DOE PAGES

Bridges, J. C.; Schwenzer, S. P.; Leveille, R.; ...

2015-01-18

The Mars Science Laboratory rover Curiosity found host rocks of basaltic composition and alteration assemblages containing clay minerals at Yellowknife Bay, Gale Crater. On the basis of the observed host rock and alteration minerals, we present results of equilibrium thermochemical modeling of the Sheepbed mudstones of Yellowknife Bay in order to constrain the formation conditions of its secondary mineral assemblage. Building on conclusions from sedimentary observations by the Mars Science Laboratory team, we assume diagenetic, in situ alteration. The modeling shows that the mineral assemblage formed by the reaction of a CO₂-poor and oxidizing, dilute aqueous solution (Gale Portage Water)more » in an open system with the Fe-rich basaltic-composition sedimentary rocks at 10–50°C and water/rock ratio (mass of rock reacted with the starting fluid) of 100–1000, pH of ~7.5–12. Model alteration assemblages predominantly contain phyllosilicates (Fe-smectite, chlorite), the bulk composition of a mixture of which is close to that of saponite inferred from Chemistry and Mineralogy data and to that of saponite observed in the nakhlite Martian meteorites and terrestrial analogues. To match the observed clay mineral chemistry, inhomogeneous dissolution dominated by the amorphous phase and olivine is required. We therefore deduce a dissolving composition of approximately 70% amorphous material, with 20% olivine, and 10% whole rock component.« less

New Insights into the Provenance of the Southern Junggar Basin in the Jurassic from Heavy Mineral Analysis and Sedimentary Characteristics

NASA Astrophysics Data System (ADS)

Zhou, T. Q.; Wu, C.; Zhu, W.

2017-12-01

Being a vital component of foreland basin of Central-western China, Southern Junggar Basin has observed solid evidences of oil and gas in recent years without a considerable advancement. The key reason behind this is the lack of systematic study on sedimentary provenance analysis of the Southern Junggar basin. Three parts of the Southern Junggar basin, including the western segment (Sikeshu Sag), the central segment (Qigu Fault-Fold Belt) and the eastern segment (Fukang Fault Zone), possess varied provenance systems, giving rise to difficulties for oil-gas exploration. In this study, 3468 heavy minerals data as well as the sedimentary environment analysis of 10 profiles and 7 boreholes were used to investigate the provenances of the deposits in the southern Junggar basin . Based on this research, it reveals that: Sikeshu sag initially shaped the foreland basin prototype in the Triassic and its provenance area of the sediments from the Sikeshu sag has primarily been situated in zhongguai uplift-chepaizi uplift depositional systems located in the northwestern margin of the Junggar Basin. From the early Jurassic, the key sources were likely to be late Carboniferous to early Permain post-collisional volcanic rocks from the North Tian Shan block to Centrao Tian Shan. In the Xishanyao formation, Abundant lithic metamorphic, epidote and garnet that suggests the source rocks were possibly late Carboniferous subduction-related arc volcanic rocks of the Central Tian Shan. In the Toutunhe formation, Bogda Mountains began uplifting and gradually becoming the major provenance. Moreover, the sedimentary boundaries of Junggar basin have also shifted towards the North Tian Shan again. In the late Jurassic, the conglomerates of the Kalazha formation directly overlie the fine-grained red beds of Qigu formation, which throw light on the rapid tectonic uplift of the North Tian Shan. In the eastern segment, meandering river delta and shore-lacustrine environments were fully developed in Badaowan formation indicating that the provenance of sediments mainly derived from the Kelameili Mountains. During the late Jurassic, the rapid uplift of Bogda Mountains could result into the distinct difference in heavy mineral assemblages between the eastern segment and the central segments.

Suspected microbial-induced sedimentary structures (MISS) in Furongian (Upper Cambrian; Jiangshanian, Sunwaptan) strata of the Upper Mississippi Valley

USGS Publications Warehouse

Eoff, Jennifer D.

2014-01-01

The Furongian (Upper Cambrian; Jiangshanian and Sunwaptan) Tunnel City Group (Lone Rock Formation and Mazomanie Formation), exposed in Wisconsin and Minnesota, represents a shallow-marine clastic environment during a time of exceptionally high sea level. Lithofacies from shoreface to transitional-offshore settings document deposition in a wave- and storm-dominated sea. Flooding of the cratonic interior was associated with formation of a condensed section and the extensive development of microbial mats. Biolamination, mat fragments, wrinkle structures, and syneresis cracks are preserved in various sandstone facies of the Lone Rock Formation, as is evidence for the cohesive behavior of sand. These microbial-induced sedimentary structures (MISS) provide unique signals of biological–physical processes that physical structures alone cannot mimic. The MISS are associated with a trilobite extinction event in the Steptoean–Sunwaptan boundary interval. This may support recent claims that Phanerozoic microbial mats were opportunistic disaster forms that flourished during periods of faunal turnover. Further investigation of stratigraphic, taphonomic, and other potential biases, however, is needed to fully test this hypothesis.

Reconnaissance geology of the Central Mastuj Valley, Chitral State, Pakistan

USGS Publications Warehouse

Stauffer, Karl W.

1975-01-01

The Mastuj Valley in Chitral State is a part of the Hindu Kush Range, and is one of the structurally most complicated areas in northern Pakistan. Sedimentary rocks ranging from at least Middle Devonian to Cretaceous, and perhaps Early Tertiary age lie between ridge-forming granodiorite intrusions and are cut by thrust faults. The thrust planes dip 10? to 40? to the north- west. Movement of the upper thrust plates has been toward the southeast relative to the lower blocks. If this area is structurally typical of the Hindu-Kush and Karakoram Ranges, then these mountains are much more tectonically disturbed than previously recorded, and suggest compression on a scale compatible with the hypothesis that the Himalayan, Karakoram, and Hindu Kush Ranges form part of a continental collision zone. The thrust faults outline two plates consisting of distinctive sedimentary rocks. The lower thrust plate is about 3,000 feet thick and consists of the isoclinally folded Upper Cretaceous to perhaps lower Tertiary Reshun Formation. It has overridden the Paleozoic metasedimentary rocks of the Chitral Slate unit. This thrust plate is, in turn, overridden by an 8,000-foot thick sequence consisting largely of Devonian to Carboniferous limestones and quartzites. A key factor in the tectonic processes has been the relatively soft and plastic lithology of the siltstone layers in the Reshun Formation which have acted as lubricants along the principal thrust faults, where they are commonly found today as fault slices and smears. The stratigraphic sequence, in the central Mastuj Valley was tentatively divided into 9 mapped units. The fossiliferous shales and carbonates of the recently defined Shogram Formation and the clastlcs of the Reshun Formation have been fitted into a sequence of sedimentary rocks that has a total thick- ness of at least 13,000 feet and ranges in age from Devonian to Neogene. Minerals of potential economic significance include antimony sulfides which have been mined elsewhere in Chitral, the tungstate, scheelite, which occurs in relatively high concentrations in heavy-mineral fractions of stream sands, and an iron-rich lateritic rock.

Multidisciplinary approach for the characterization of a new Late Cretaceous continental arc in the Central Pontides (Northern Turkey)

NASA Astrophysics Data System (ADS)

Ellero, Alessandro; Ottria, Giuseppe; Sayit, Kaan; Catanzariti, Rita; Frassi, Chiara; Cemal Göncüoǧlu, M.; Marroni, Michele; Pandolfi, Luca

2016-04-01

In the Central Pontides (Northern Turkey), south of Tosya, a tectonic unit consisting of not-metamorphic volcanic rocks and overlying sedimentary succession is exposed inside a fault-bounded elongated block. It is restrained within a wide shear zone, where the Intra-Pontide suture zone, the Sakarya terrane and the Izmir-Ankara-Erzincan suture zone are juxtaposed as result of strike-slip activity of the North Anatolian shear zone. The volcanic rocks are mainly basalts and basaltic andesites (with their pyroclastic equivalents) associated with a volcaniclastic formation made up of breccias and sandstones that are stratigraphically overlain by a Marly-calcareous turbidite formation. The calcareous nannofossil biostratigraphy points to a late Santonian-middle Campanian age (CC17-CC21 Zones) for the sedimentary succession. The geochemistry of the volcanic rocks reveals an active continental margin setting as evidenced by the enrichment in Th and LREE over HFSE, and the Nb-enriched nature of these lavas relative to N-MORB. As highlighted by the performed arenite petrography, the occurrence of continent-derived clastics in the sedimentary succession supports the hypothesis of a continental arc-derived volcanic succession. Alternative geodynamic reconstructions are proposed, where this tectonic unit could represent a slice derived from the northern continental margin of the Intra- Pontide or Izmir-Ankara-Erzincan oceanic basins.

Earth's early fossil record: Why not look for similar fossils on Mars?

NASA Technical Reports Server (NTRS)

Awramik, Stanley M.

1989-01-01

The oldest evidence of life on Earth is discussed with attention being given to the structure and formation of stromatolites and microfossils. Fossilization of microbes in calcium carbonate or chert media is discussed. In searching for fossil remains on Mars, some lessons learned from the study of Earth's earliest fossil record can be applied. Certain sedimentary rock types and sedimentary rock configurations should be targeted for investigation and returned by the Martian rover and ultimately by human explorers. Domical, columnar to wavy laminated stratiform sedimentary rocks that resemble stromatolites should be actively sought. Limestone, other carbonates, and chert are the favored lithology. Being macroscopic, stromatolites might be recognized by an intelligent unmanned rover. In addition, black, waxy chert with conchoidal fracture should be sought. Chert is by far the preferred lithology for the preservation of microbes and chemical fossils. Even under optimal geological conditions (little or no metamorphism or tectonic alteration, excellent outcrops, and good black chert) and using experienced field biogeologists, the chances of finding well preserved microbial remains in chert are very low.

Geochemical Analysis for Sedimentary Emerald Mineralization in Western Emerald belt, Colombia

NASA Astrophysics Data System (ADS)

Nino Vasquez, Gabriel Felipe; Song, Sheng-Rong

2017-04-01

1Gabriel Felipe Nino Vasquez and 1Sheng-Rong Song 1Department of Geosciences, National Taiwan University Colombia hosts a large quantity of mineral resources due to its complex tectonic arrangement, and emerald deposits are one of the most representatives for the country. Emeralds in Colombia occur mainly in black shale, and are located in eastern Andes Cordillera with two parallel belts separated by approximately 130 Km: the Western belt (WB) and the Eastern belt (EB). The geological, mineralogical and tectonic features from these belts are quite similar (Buenaventura 2002). Previous researchers concluded that emeralds in Colombia came from hydrothermal sedimentary processes without any magmatic influence, and suggested that the source of Cr, V and Be (which are important components of the beryl) was the host rock. According to their results, the process which allowed the shale to release these cations was the metasomatism (albitization and carbonization), which was resulted from the interaction between the rocks and the alkaline brines. Fractures and fault planes originated by these tectonic movements were fulfilled by enriched fluids, which they allowed emeralds and the other minerals precipitation with decreasing alkalinity and pressure (Giuliani et al. 1994). However, there were several pitfalls of conclusions drawn from previous researches. Firstly, Cr and V were widely distributed and come from mafic and ultramafic rocks, and Be was mostly found in pegmatites, finding these elements in sedimentary rocks suggest that probably the ultramafic rocks occurred not far from the deposits. Secondly, there was an inconsistency in the estimated temperatures of emeralds formation, i.e. temperature of hydrothermal sedimentary deposits was only 200° C, while laboratory analysis showed that the formation of emeralds was higher than 300° C. Therefore, there might still be an allocthonus influence on emerald formation that significantly increases the temperature. This research is going to contribute information in order to clarify these inconsistencies, We have done the O and C isotopes in calcite and S isotope in pyrite and shale from different mines along the (WB) in order to determine the main fluid source of the mineralization. Selected samples will also be analyzed with EDS, RAMAN and ICP-MS methods to obtain the exact compositions of elements with extremely low concentrations in host rock, metazomatized host rock and mineralization (productive and not productive veins); the main purpose is to measure how strong were the fluid-rock interaction to leach elements out from the black shale. Thin sections from the altered shale and vein have been analyzed with the purpose of identify paragenesis and microstructures in the mineralization. Finally, we would like to gather the results from different sectors and compare it with the previous studies.

A Radioelement Analysis of the Northern Black Hills, South Dakota, U.S.A

NASA Astrophysics Data System (ADS)

Young, Dylan Wade

The uranium, thorium, and potassium contents from 736 samples, within a 15-km radius of the Homestake Gold Mine and Sanford Underground Research Facility in the Northern Black Hills indicate the geoneutrino background may be higher than average for the continental crust. The radioactive element contents of igneous, metamorphic, and sedimentary rocks were determined by gamma ray spectrometry. Many rocks show hydrothermal and metamorphic alteration within the last ten Ma of the Tertiary period. Young alkali rich igneous rocks, such as rhyolite, phonolite and other volcanic rocks, have lower than average Th:U ratios. The radioelement content of 215 igneous rocks were determined. The radioelement contents of 143 metamorphic rocks were determined. This study also shows that metamorphic rocks were found to have low variable U:Th content when compared to content in igneous rocks. Sedimentary rocks, in general, have low U, Th, and K content. The radioelement content of 236 sedimentary rocks were determined. Rocks present within the Homestake Gold Mine, are highly altered by hydrothermal and metamorphic activity, enriching U, and in some areas, Th content. The Homestake Gold Mine lies almost entirely within metamorphic rocks. Igneous rocks occur in the mine as veins and dikes. The dominant igneous rock present is rhyolite. Metamorphic rocks present inside the HGM, were divided by formation; Ellison Fm, Poorman Fm, Yates Unit [lower Poorman Fm], Homestake Fm, and Flagrock Fm. The finding of high radioelement content in the rocks suggests that the antineutrinos background at the HGM will need to be considered and calibrated for, in future experiments conducted at the Sanford Underground Research Facility. A geoneutrino luminosity of 1.26x105 (mg-1s -1) was calculated from the samples analyzed within the Homestake Gold Mine. A total geoneutrino luminosity of 4.44x105 (mg -1s=1) was calculated from the sum of all analyses conducted in the Northern Black Hills.

New approaches in the indirect quantification of thermal rock properties in sedimentary basins: the well-log perspective

NASA Astrophysics Data System (ADS)

Fuchs, Sven; Balling, Niels; Förster, Andrea

2016-04-01

Numerical temperature models generated for geodynamic studies as well as for geothermal energy solutions heavily depend on rock thermal properties. Best practice for the determination of those parameters is the measurement of rock samples in the laboratory. Given the necessity to enlarge databases of subsurface rock parameters beyond drill core measurements an approach for the indirect determination of these parameters is developed, for rocks as well a for geological formations. We present new and universally applicable prediction equations for thermal conductivity, thermal diffusivity and specific heat capacity in sedimentary rocks derived from data provided by standard geophysical well logs. The approach is based on a data set of synthetic sedimentary rocks (clastic rocks, carbonates and evaporates) composed of mineral assemblages with variable contents of 15 major rock-forming minerals and porosities varying between 0 and 30%. Petrophysical properties are assigned to both the rock-forming minerals and the pore-filling fluids. Using multivariate statistics, relationships then were explored between each thermal property and well-logged petrophysical parameters (density, sonic interval transit time, hydrogen index, volume fraction of shale and photoelectric absorption index) on a regression sub set of data (70% of data) (Fuchs et al., 2015). Prediction quality was quantified on the remaining test sub set (30% of data). The combination of three to five well-log parameters results in predictions on the order of <15% for thermal conductivity and thermal diffusivity, and of <10% for specific heat capacity. Comparison of predicted and benchmark laboratory thermal conductivity from deep boreholes of the Norwegian-Danish Basin, the North German Basin, and the Molasse Basin results in 3 to 5% larger uncertainties with regard to the test data set. With regard to temperature models, the use of calculated TC borehole profiles approximate measured temperature logs with an error of <3°C along a 4 km deep profile. A benchmark comparison for thermal diffusivity and specific heat capacity is pending. Fuchs, Sven; Balling, Niels; Förster, Andrea (2015): Calculation of thermal conductivity, thermal diffusivity and specific heat capacity of sedimentary rocks using petrophysical well logs, Geophysical Journal International 203, 1977-2000, doi: 10.1093/gji/ggv403

Spatially-resolved isotopic study of carbon trapped in ∼3.43 Ga Strelley Pool Formation stromatolites

NASA Astrophysics Data System (ADS)

Flannery, David T.; Allwood, Abigail C.; Summons, Roger E.; Williford, Kenneth H.; Abbey, William; Matys, Emily D.; Ferralis, Nicola

2018-02-01

The large isotopic fractionation of carbon associated with enzymatic carbon assimilation allows evidence for life's antiquity, and potentially the early operation of several extant metabolic pathways, to be derived from the stable carbon isotope record of sedimentary rocks. Earth's organic carbon isotope record extends to the Late Eoarchean-Early Paleoarchean: the age of the oldest known sedimentary rocks. However, complementary inorganic carbon reservoirs are poorly represented in the oldest units, and commonly reported bulk organic carbon isotope measurements do not capture the micro-scale isotopic heterogeneities that are increasingly reported from younger rocks. Here, we investigated the isotopic composition of the oldest paired occurrences of sedimentary carbonate and organic matter, which are preserved as dolomite and kerogen within textural biosignatures of the ∼3.43 Ga Strelley Pool Formation. We targeted least-altered carbonate phases in situ using microsampling techniques guided by non-destructive elemental mapping. Organic carbon isotope values were measured by spatially-resolved bulk analyses, and in situ using secondary ion mass spectrometry to target microscale domains of organic material trapped within inorganic carbon matrixes. Total observed fractionation of 13C ranges from -29 to -45‰. Our data are consistent with studies of younger Archean rocks that host biogenic stromatolites and organic-inorganic carbon pairs showing greater fractionation than expected for Rubisco fixation alone. We conclude that organic matter was fixed and/or remobilized by at least one metabolism in addition to the CBB cycle, possibly by the Wood-Ljungdahl pathway or methanogenesis-methanotrophy, in a shallow-water marine environment during the Paleoarchean.

Clastic sedimentary rocks of the Michipicoten Volcanic-sedimentary belt, Wawa, Ontario

NASA Technical Reports Server (NTRS)

Ojakangas, R. W.

1983-01-01

The Wawa area, part of the Michipicoten greenstone belt, contains rock assemblages representative of volcanic sedimentary accumulations elsewhere on the shield. Three mafic to felsic metavolcanic sequences and cogenetic granitic rocks range in age from 2749 + or - 2Ma to 2696 + or - 2Ma. Metasedimentary rocks occur between the metavolcanic sequences. The total thickness of the supracrustal rocks may be 10,000 m. Most rocks have been metamorphosed under greenschist conditions. The belt has been studied earlier and is currently being remapped by Sage. The sedimentrologic work has been briefly summarized; two mainfacies associations of clastic sedimentary rocks are present - a Resedimented (Turbidite) Facies Association and a Nonmarine (Alluvial Fan Fluvial) Facies Association.

The Robinson and Weatherly uraniferous pyrobitumen deposits near Placerville, San Miguel County, Colorado

USGS Publications Warehouse

Wilmarth, V.R.; Vickers, R.C.

1953-01-01

Uranium deposits that contain uraniferous pyrobitumen of possible hydrothermal origin occur at the Weatherly and Robinson properties near Placerville, San Miguel County, Colo. These deposits were mined for copper, silver, and gold more than 50 years ago and were developed for uranium in 1950. The Robinson property, half a mile east of Placerville, consists of the White Spar, New Discovery Lode, and Barbara Jo claims. The rocks in this area are nearly horizontal sandstones, shales, limestones, and conglomerates of the Cutler formation of Permian age and the Dolores formation of Triassic and Jurassic (?) age. These rocks have been faulted extensively and intruded by a Tertiary (?) andesite porphyry dike. Uranium-bearing pyrobitumen associated with tennantite, tetrahedrite, galena, sphalerite, chalcopyrite, bornite, azurite, malachite, calcite, barite, and quartz occurs in a lenticular body as much as 40 feet long and 6 feet wide along a northwest-trending, steeply dipping normal fault. The uranium content of eleven samples from the uranium deposit ranges from 0.001 to 0.045 percent uranium and averages about 0.02 percent uranium. The Weatherly property, about a mile northwest of Placerville, consists of the Black King claims nos. 1, 4, and 5. The rocks in this area include the complexly faulted Cutler formation of Permian age and the Dolores formation of Triassic and Jurassic (?) age. Uranium-bearing pyrobitumen arid uranophane occur, along a northwest-trending, steeply dipping normal fault and in the sedimentary rocks on the hanging wall of the fault. Lens-shaped deposits in the fault zone are as much as 6 feet long and 2 feet wide and contain as much as 9 percent uranium; whereas channel samples across the fault zone contain from 0.001 to 0.014 percent uranium. Tetrahedrite, chalcopyrite, galena, sphalerite, fuchsite, malachite, azurite, erythrite, bornite, and molybdite in a gangue of pyrite, calcite, barite, and quartz are associated with the uraniferous material. In the sedimentary rocks on the hanging wall, uranium-bearing pyrobitumen occurs in replacement lenses as much as,8 inches wide and 6 feet long, and in nodules as much as 6 inches in diameter for approximately 100 feet away from the fault. Pyrite and calcite are closely associated with the uraniferous material in the sedimentary rocks. Samples from the replacement bodies contain from 0. 007 to 1.4 percent uranium.

Biostratigraphy and structure of paleozoic host rocks and their relationship to Carlin-type gold deposits in the Jerritt Canyon mining district, Nevada

USGS Publications Warehouse

Peters, S.G.; Armstrong, A.K.; Harris, A.G.; Oscarson, R.L.; Noble, P.J.

2003-01-01

The Jerritt Canyon mining district in the northern Independence Range, northern Nevada, contains multiple, nearly horizontal, thrust masses of platform carbonate rocks that are exposed in a series of north- to northeast-elongated, tectonic windows through rocks of the Roberts Mountains allochthon. The Roberts Mountains allochthon was emplaced during the Late Devonian to Early Mississippian Antler orogeny. These thrust masses contain structurally and stratigraphically controlled Carlin-type gold deposits. The gold deposits are hosted in tectonically truncated units of the Silurian to Devonian Hanson Creek and Roberts Mountains Formations that lie within structural slices of an Eastern assemblage of Cambrian to Devonian carbonate rocks. In addition, these multiply thrust-faulted and folded host rocks are structurally interleaved with Mississippian siliciclastic rocks and are overlain structurally by Cambrian to Devonian siliciclastic units of the Roberts Mountains allochthon. All sedimentary rocks were involved in thrusting, high-angle faulting, and folding, and some of these events indicate substantial late Paleozoic and/or Mesozoic regional shortening. Early Pennsylvanian and late Eocene dikes also intrude the sedimentary rocks. These rocks all were uplifted into a northeast-trending range by subsequent late Cenozoic Basin and Range faulting. Eocene sedimentary and volcanic rocks flank part of the range. Pathways of hydrothermal fluid flow and locations of Carlin-type gold orebodies in the Jerritt Canyon mining district were controlled by structural and host-rock geometries within specific lithologies of the stacked thrust masses of Eastern assemblage rocks. The gold deposits are most common proximal to intersections of northeast-striking faults, northwest-striking dikes, and thrust planes that lie adjacent to permeable stratigraphic horizons. The host stratigraphic units include carbonate sequences that contained primary intercrystalline permeability, which provided initial pathways for fluid flow and later served as precipitation sites for ore minerals. Alteration, during, and perhaps prior to mineralization, enhanced primary permeability by dissolution, by removal of calcite, and by formation of dolomite. Ore-stage sulfide minerals and alteration minerals commonly precipitated in pore spaces among dolomite grains. Microveinlets and microbrecciation in zones of intense alteration also provided networks of secondary permeability that further enhanced fluid flux and produced additional sites for ore deposition.

Major element compositions of fluid inclusions from hydrothermal vein-type deposits record eroded sedimentary units in the Schwarzwald district, SW Germany

NASA Astrophysics Data System (ADS)

Walter, Benjamin F.; Burisch, Mathias; Marks, Michael A. W.; Markl, Gregor

2017-12-01

Mixing of sedimentary formation fluids with basement-derived brines is an important mechanism for the formation of hydrothermal veins. We focus on the sources of the sediment-derived fluid component in ore-forming processes and present a comprehensive fluid inclusion study on 84 Jurassic hydrothermal veins from the Schwarzwald mining district (SW Germany). Our data derive from about 2300 fluid inclusions and reveal differences in the average fluid composition between the northern, central, and southern Schwarzwald. Fluids from the northern and southern Schwarzwald are characterised by high salinities (18-26 wt% NaCl+CaCl2), low Ca/(Ca+Na) mole ratios (0.1-0.4), and variable Cl/Br mass ratios (30-1140). In contrast, fluids from the central Schwarzwald show even higher salinities (23-27 wt% NaCl+CaCl2), higher Ca/(Ca+Na) mole ratios (0.2-0.9), and less variable Cl/Br mass ratios (40-130). These fluid compositions correlate with the nature and thickness of the now eroded sedimentary cover rocks. Compared to the northern and the southern Schwarzwald, where halite precipitation occurred during the Middle Triassic, the sedimentary basin in the central Schwarzwald was relatively shallow at this time and no halite was precipitated. Accordingly, Cl/Br ratios of fluids from the central Schwarzwald provide no evidence for the reaction of a sedimentary brine with halite, whereas those from the northern and southern Schwarzwald do. Instead, elevated Ca/(Ca+Na), high SO4 contents, and relatively low Cl/Br imply the presence of a gypsum dissolution brine during vein formation in the central Schwarzwald which agrees with the reconstructed regional Triassic geology. Hence, the information archived in fluid inclusions from hydrothermal veins in the crystalline basement has the potential for reconstructing sedimentary rocks in the former overburden.

The Chicxulub crater - impact metamorphism of sulfate and carbonate lithologies

NASA Astrophysics Data System (ADS)

Deutsch, A.; Langenhorst, F.; Hornemann, U.; Ivanov, B. A.

2003-04-01

It is discussed whether in the aftermath of the Chicxulub event, impact-released CO_2 and SO_x have changed the Earth's climate, acting also as lethal thread for life. Undoubtedly, vaporization of carbonates and sulfates, which are major target lithologies at the Chicxulub impact site, occurred in the footprint of the projectile. What happened to these lithologies outside this very restricted zone was so far unconstrained. Petrologic observations on PEMEX and UNAM as well as on the CSDP cores allow to set up a general classification for shock-related pro-grade effects on sulfate and carbonate sedimentary rocks. Shock effects in lithic breccias are restricted to brecciation and formation of twins in calcite. Suevites mostly lack melted carbonate clasts; annealing effects in anhydrite fragments are absent. The underlying melt breccias contain anhydrite fragments still displaying a sedimentary texture, and limestone clasts, whose texture reflect crystallization from melt. Impact melt breccias from deeper levels frequently contain partially resorbed anhydrite clasts and a melt matrix with the Ca-rich mineral assemblage quartz + plagioclase + clinopyroxene; this mineral assemblage provides evidence for partial dissociation of CaSO_4. Large clasts of anhydrite consist of equant crystals with 120^o triple junctions, a feature indicative for re-crystallization in the solid state. Tagamites (impact melt rocks) are virtually free of clasts from sedimentary lithologies. These rocks have an extremely high formation temperature, which caused total dissociation of CaSO_4 and CaCO_3. Finally, up to 100 μm wide veins of anhydrite + calcite + quartz cut the matrix of all lithologies except the tagamites. They probably represent "degassing vents". The given scheme is in qualitative accordance with data of shock recovery and annealing experiments as well as with modeling results. In addition, it substantiates that annealing plays a fundamental role in the impact metamorphism of sedimentary rocks.

Geophysical modeling of the structural relationships between the Precambrian Reading Prong rocks and the Paleozoic sedimentary sequence, Easton quadrangle, PA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, D.M.; Malinconico, L.L. Jr.

1993-03-01

This project involves the geophysical modeling of the structural relationships between the Precambrian Reading Prong rocks and the Paleozoic sedimentary cover rocks near Easton, Pennsylvania. The Precambrian rocks have generally been assumed to have been emplaced on the Paleozoic sequence along a shallow thrust fault. However, at present time the attitude of the faults bordering the Precambrian terranes are all very steeply dipping. This was explained by the subsequent folding of the whole sequence during later orogenic activity. The objective of this work is to determine the attitude and depth of the fault contact between the Precambrian crystalline rocks andmore » the Paleozoic sedimentary rocks. A series of traverses (each separated by approximately one mile) were established perpendicular to the strike of the Precambrian rocks. Along each traverse both gravity and magnetic readings were taken at 0.2 kilometer intervals. The data were reduced and presented as profiles and contour maps. Both the magnetic and gravity data show positive anomalies that correlate spatially with the location of the Precambrian rocks. The gravity data have a long wavelength regional trend increasing to the north with a shorter wavelength anomaly of 2 milligals which coincides with the Precambrian rocks. The magnetic data have a single positive anomaly of almost 1,000 gammas which also coincides with the Precambrian terrane. These data will now be used to develop two dimensional density and susceptibility models of the area. From these models, the thickness of each formation and the structural relationships between them, as well as the attitude and depth of the fault contact will be determined.« less

Refinement of Regional Distance Seismic Moment Tensor and Uncertainty Analysis for Source-Type Identification

DTIC Science & Technology

2014-09-02

release; distribution is unlimited. rock zone which provides a pathway for formation fluids, natural gas and crude oil from deeper strata that are... southeast Louisiana (Figure 21). It is a part of the Gulf Coast salt basin which exhibits many salt structures formed by upward flow of sedimentary salt...primarily, evaporites) on account of low density of salt and overburden pressures caused by younger sedimentary deposits (Beckman and Williamson, 1990

DOE workshop: Sedimentary systems, aqueous and organic geochemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-07-01

A DOE workshop on sedimentary systems, aqueous and organic geochemistry was held July 15-16, 1993 at Lawrence Berkeley Laboratory. Papers were organized into several sections: Fundamental Properties, containing papers on the thermodynamics of brines, minerals and aqueous electrolyte solutions; Geochemical Transport, covering 3-D imaging of drill core samples, hydrothermal geochemistry, chemical interactions in hydrocarbon reservoirs, fluid flow model application, among others; Rock-Water Interactions, with presentations on stable isotope systematics of fluid/rock interaction, fluid flow and petotectonic evolution, grain boundary transport, sulfur incorporation, tracers in geologic reservoirs, geothermal controls on oil-reservoir evolution, and mineral hydrolysis kinetics; Organic Geochemistry covered new methodsmore » for constraining time of hydrocarbon migration, kinetic models of petroleum formation, mudstones in burial diagenesis, compound-specific carbon isotope analysis of petroleums, stability of natural gas, sulfur in sedimentary organic matter, organic geochemistry of deep ocean sediments, direct speciation of metal by optical spectroscopies; and lastly, Sedimentary Systems, covering sequence stratigraphy, seismic reflectors and diagenetic changes in carbonates, geochemistry and origin of regional dolomites, and evidence of large comet or asteroid impacts at extinction boundaries.« less

Beneath the scaly clay and clay breccia of Karangsambung area

NASA Astrophysics Data System (ADS)

Arisbaya, Ilham; Handayani, Lina

2018-02-01

Karangsambung area, Central Java-Indonesia, records tectonic evolution of the western part of Sundaland margin. The area is thought to have undergone a long tectonic evolution from palaeosubduction, collision with the continental fragments of Gondwana, to the formation of the recent subduction zone. An interesting phenomenon in this area is the presence of the Late Cretaceous ophiolitic blocks with an east northeast (ENE) trending-direction surrounded by the east trend of Eocene - Oligocene sedimentary melange formation. There was also an ENE trending Dakah volcanic rocks unit found in this area, with approximately equivalent age with the sedimentary mélange formation. There are two main interpretations regarding this volcanic unit, as an olistostrome and as an insitu shallow subduction magmatic product. Detailed mechanism of the emplacement of the Late Cretaceous ophiolite and the genesis of the volcanic rocks unit and their implications to the regional tectonic model is still open for discussion. Geophysical research in this key area may help to reveal the geometry, relationship among rocks units, and tectonic evolution. Unfortunately, geophysical studies in this area are still lacking. Previous geophysical work in Karangsambung still leaves uncertainty, especially in depth control and spatial resolution issue. Here we describe the results of previous works in Karangsambung as basic knowledge for the upcoming geophysical study.

Petroleum geology of the Southern Bida Basin, Nigeria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braide, S.P.

1990-05-01

The Southern Bida basin is located in central Nigeria and is a major sedimentary area with a 3.5-km-thick sedimentary fill. However, it is the least understood of Nigeria's sedimentary basins because serious oil and gas exploration has not been undertaken in the basin. The surrounding Precambrian basement rocks experienced severe deformation during the Late Panafrican phase (600 {plus minus} 150 m.y.), and developed megashears that were reactivated during the Late Campanian-Maestrichtian. The ensuing wrenchfault tectonics formed the basin. The sedimentary fill, which comprises the Lokoja Formation are chiefly, if not wholly, nonmarine clastics. These have been characterized into facies thatmore » rapidly change from basin margin to basin axis, and have undergone only relatively mild tectonic distortion. Subsurface relations of the Lokoja Formation are postulated from outcrop study. The potential source rocks are most likely within the basinal axis fill and have not been deeply buried based on vitrinite reflectance of <0.65%. These findings, with the largely nonmarine depositional environment, suggest gas and condensate are the most likely hydrocarbons. Alluvial fans and deltaic facies that interfinger with lacustrine facies provide excellent reservoir capabilities. Potential traps for hydrocarbon accumulation were formed by a northwest-southeast-trending Campanian-Maestrichtian wrench system with associated northeast-southwest-oriented normal faults. The traps include strata in alluvial fans, fractured uplifted basement blocks, and arched strata over uplifted blocks. However, the size of hydrocarbon accumulations could be limited to some extent by a lack of effective hydrocarbon seal, because the dominant seals in the formation are unconformities.« less

Geologic map of the Washington West 30’ × 60’ quadrangle, Maryland, Virginia, and Washington D.C.

USGS Publications Warehouse

Lyttle, Peter T.; Aleinikoff, John N.; Burton, William C.; Crider, E. Allen; Drake, Avery A.; Froelich, Albert J.; Horton, J. Wright; Kasselas, Gregorios; Mixon, Robert B.; McCartan, Lucy; Nelson, Arthur E.; Newell, Wayne L.; Pavlides, Louis; Powars, David S.; Southworth, C. Scott; Weems, Robert E.

2018-01-02

The Washington West 30’ × 60’ quadrangle covers an area of approximately 4,884 square kilometers (1,343 square miles) in and west of the Washington, D.C., metropolitan area. The eastern part of the area is highly urbanized, and more rural areas to the west are rapidly being developed. The area lies entirely within the Chesapeake Bay drainage basin and mostly within the Potomac River watershed. It contains part of the Nation's main north-south transportation corridor east of the Blue Ridge Mountains, consisting of Interstate Highway 95, U.S. Highway 1, and railroads, as well as parts of the Capital Beltway and Interstate Highway 66. Extensive Federal land holdings in addition to those in Washington, D.C., include the Marine Corps Development and Education Command at Quantico, Fort Belvoir, Vint Hill Farms Station, the Naval Ordnance Station at Indian Head, the Chesapeake and Ohio Canal National Historic Park, Great Falls Park, and Manassas National Battlefield Park. The quadrangle contains most of Washington, D.C.; part or all of Arlington, Culpeper, Fairfax, Fauquier, Loudoun, Prince William, Rappahannock, and Stafford Counties in northern Virginia; and parts of Charles, Montgomery, and Prince Georges Counties in Maryland.The Washington West quadrangle spans four geologic provinces. From west to east these provinces are the Blue Ridge province, the early Mesozoic Culpeper basin, the Piedmont province, and the Coastal Plain province. There is some overlap in ages of rocks in the Blue Ridge and Piedmont provinces. The Blue Ridge province, which occupies the western part of the quadrangle, contains metamorphic and igneous rocks of Mesoproterozoic to Early Cambrian age. Mesoproterozoic (Grenville-age) rocks are mostly granitic gneisses, although older metaigneous rocks are found as xenoliths. Small areas of Neoproterozoic metasedimentary rocks nonconformably overlie Mesoproterozoic rocks. Neoproterozoic granitic rocks of the Robertson River Igneous Suite intruded the Mesoproterozoic rocks. The Mesoproterozoic rocks are nonconformably overlain by Neoproterozoic metasedimentary rocks of the Fauquier and Lynchburg Groups, which in turn are overlain by metabasalt of the Catoctin Formation. The Catoctin Formation is overlain by Lower Cambrian clastic metasedimentary rocks of the Chilhowee Group. The Piedmont province is exposed in the east-central part of the map area, between overlapping sedimentary units of the Culpeper basin on the west and those of the Coastal Plain province on the east. In this area, the Piedmont province contains Neoproterozoic and lower Paleozoic metamorphosed sedimentary, volcanic, and plutonic rocks. Allochthonous mélange complexes on the western side of the Piedmont are bordered on the east by metavolcanic and metasedimentary rocks of the Chopawamsic Formation, which has been interpreted as part of volcanic arc. The mélange complexes are unconformably overlain by metasedimentary rocks of the Popes Head Formation. The Silurian and Ordovician Quantico Formation is the youngest metasedimentary unit in this part of the Piedmont. Igneous rocks include the Garrisonville Mafic Complex, transported ultramafic and mafic inclusions in mélanges, monzogranite of the Dale City pluton, and Ordovician tonalitic and granitic plutons. Jurassic diabase dikes are the youngest intrusions. The fault boundary between rocks of the Blue Ridge and Piedmont provinces is concealed beneath the Culpeper basin in this area but is exposed farther south. Early Mesozoic rocks of the Culpeper basin unconformably overlie those of the Piedmont and Blue Ridge provinces in the central part of the quadrangle. The north-northeast-trending extensional basin contains Upper Triassic to Lower Jurassic nonmarine sedimentary rocks. Lower Jurassic sedimentary strata are interbedded with basalt flows, and both Upper Triassic and Lower Jurassic strata are intruded by diabase of Early Jurassic age. The Bull Run Mountain fault, a major Mesozoic normal fault characterized by down-to-the-east displacement, separates rocks of the Culpeper basin from those of the Blue Ridge province on the west. On the east, the contact between rocks of the Culpeper basin and those of the Piedmont province is an unconformity, which has been locally disrupted by normal faults. Sediments of the Coastal Plain province unconformably overlie rocks of the Piedmont province along the Fall Zone and occupy the eastern part of the quadrangle. Lower Cretaceous deposits of the Potomac Formation consist of fluvial-deltaic gravels, sands, silts, and clays. Discontinuous fluvial and estuarine terrace deposits of Pleistocene and middle- to late-Tertiary age flank the modern Potomac River valley unconformable capping these Cretaceous strata and the crystalline basement where the Cretaceous has been removed by erosion. East of the Potomac River, the Potomac Formation is onlapped and unconformably overlain by a westward thinning wedge of marine sedimentary deposits of Late Cretaceous and early- and late-Tertiary age. Basement rooted Coastal Plain faults of Tertiary to Quaternary age occur along the Fall Zone and this part of the inner Coastal Plain. These Coastal Plain faults have geomorphic expression that appear to influence river drainage patterns.The geologic map of the Washington West quadrangle is intended to serve as a foundation for applying geologic information to problems involving land use decisions, groundwater availability and quality, earth resources such as natural aggregate for construction, assessment of natural hazards, and engineering and environmental studies for waste disposal sites and construction projects. This 1:100,000-scale map is mainly based on more detailed geologic mapping at a scale of 1:24,000.

Composition, Age, and Origin of Cretaceous Granitic Magmatism on the Eastern Chukchi Peninsula

NASA Astrophysics Data System (ADS)

Luchitskaya, M. V.; Sokolov, S. D.; Pease, V.; Miller, E.; Belyatsky, B. V.

2018-05-01

New geochronological and isotopic geochemical data are given, which make it possible to recognize two types of granitic rocks on the eastern Chukchi Peninsula. Early Cretaceous Tkachen and Dolina granitic plutons with zircon ages (U-Pb SIMS) of 119-122 and 131-136 Ma are related to the first type. They cut through Devonian-Lower Carboniferous basement rocks and are overlain by the Aptian-Albian Etelkuyum Formation. Basal units of the latter contain fragments of granitic rocks. Late Cretaceous Provideniya and Rumilet granitic plutons, which contain zircons with ages of 94 and 85 Ma (U-Pb SIMS), respectively, belong to the second type. They cut through volcanic-sedimentary rocks of the Etelkuyum and Leurvaam formations pertaining to the Okhotsk-Chukotka Volcanic Belt. In petrographic and geochemical features, the Early Cretaceous granitic rocks of the Tkachen Pluton are commensurable with I-type granites, while Late Cretaceous granite of the Rumilet Pluton is comparable to A2-type granite. The Sr-Nd isotopic data provide evidence that from the Early Cretaceous Tkachen and Dolina plutons to the Late Cretaceous Provideniya and Rumilet plutons, the degree of crustal assimilation of suprasubduction mantle-derived melts increases up to partial melting of heterogeneous continental crust enriched in rubidium. An unconformity and various degrees of secondary alteration of volcanic-sedimentary rocks have been established in the Okhotsk-Chukotka Volcanic Belt, and this was apparently caused by transition of the tectonic setting from suprasubduction to a transform margin with local extension.

Very early Archean crustal-accretion complexes preserved in the North Atlantic craton

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nutman, A.P.; Collerson, K.D.

1991-08-01

The North Atlantic craton contains very early Archean supracrustal rocks, orthogneisses, and massive ultramafic rocks. Most units of supracrustal rocks are dominated by mafic volcanic rocks, layered gabbros, and banded iron formations, bust some also contain abundant felsic volcanic-sedimentary rocks, quartzites, and marbles. Some quartzites contain detrital zircons derived from rocks identical in age to felsic volcanic-sedimentary rocks in these sequences (ca. 3800 Ma) and also from older (ca. 3850 Ma) sources. The presence of the ca. 3850 Ma detrital zircons suggests that the supracrustal units containing them were deposited on, or close to, ca. 3850 Ma sialic crust. Themore » massive ultramafic rocks have chemical affinities to upper mantle rocks. The voluminous suites of tonalitic gneisses are dominated by 3700-3730 Ma bodies that intrude the supracrustal sequences, but they also locally contain components with ages between 3820 and 3920 Ma. The diverse supracrustal units, upper mantle rocks, and {ge} 3820 Ma components in the gneisses were tectonically interleaved in very early Archean convergent plate boundaries, giving rise to accretion complexes. In the period 3700-3730 Ma, voluminous tonalitic magmas produced by partial melting of predominantly mafic rocks in the base of the accretion complexes were emplaced at higher levels, forming juvenile continental crust and leaving behind a refractory lower crustal to upper mantle substrate.« less

Geologic framework of pre-Cretaceous rocks in the Southern Ute Indian Reservation and adjacent areas, southwestern Colorado and northwestern New Mexico

USGS Publications Warehouse

Condon, Steven M.

1992-01-01

This report is a discussion and summary of Jurassic and older rocks in the Southern Ute Indian Reservation and adjacent areas, southwestern Colorado and northwestern New Mexico, and is based on analysis of geophysical logs and observations of outcrops. The Reservation, which is located in the northern San Juan Basin, has been the site of deposition of sediments for much of the Phanerozoic. Geologic times represented on the Reservation are the Precambrian, Cambrian, Devonian, Mississippian, Pennsylvanian, Permian, Triassic, Jurassic, Cretaceous, Tertiary, and Quaternary. Rocks of Ordovician and Silurian age have not been reported in this region. Thicknesses of pre-Cretaceous sedimentary rocks range from about 750 feet (229 meters) on the Archuleta arch, east of the Reservation, to more than 8,300 feet (2,530 meters) just northwest of the Reservation. About 5,500 feet (1,676 meters) of pre-Cretaceous sedimentary rocks occur in the central part of the Reservation, near Ignacio. At Ignacio the top of the Jurassic lies at a depth of 7,600 feet (2,316 meters) below the surface, which is composed of Tertiary rocks. As much as 2,500 feet (762 meters) of Tertiary rocks occur in the area. More than 10,000 feet (3,048 meters) of Cretaceous and younger rocks, and 15,600 feet (4,755 meters) of all Phanerozoic sedimentary rocks occur in the vicinity of the Reservation. In the early Paleozoic the area that includes the Southern Ute Reservation was on the stable western shelf of the craton. During this time sediments that compose the following shallow-marine clastic and carbonate rocks were deposited: the Upper Cambrian Ignacio Quartzite (0-150 feet; 0-46 meters), Upper Devonian Elbert Formation (50-200 feet; 15-61 meters), Upper Devonian Ouray Limestone (10-75 feet; 3-23 meters), and Mississippian Leadville Limestone (0-250 feet; 0-76 meters). Mixed carbonate and clastic deposition, which was punctuated by a unique episode of deposition of evaporite sediments, continued through the Pennsylvanian after a significant episode of erosion at the end of the Mississippian. Pennsylvanian rocks on the Reservation are the Molas Formation (20-100 feet; 6-30 meters) and Hermosa Group (400-2,800 feet; 122-853 meters), which consists of the Pinkerton Trail Formation (40-120 feet; 12-36 meters), Paradox Formation and equivalent rocks (200-1,800 feet; 61-549 meters), and Honaker Trail Formation (200-1,300 feet; 61-396 meters). A unit that is transitional between the Pennsylvanian and Permian is the Rico Formation, which is about 200 feet (61 meters) thick across most of the Reservation area. The close of the Paleozoic Era was marked by a great influx of arkosic clastic sediments from uplifted highlands to the north of the Reservation area during the Permian. Near the paleomountain front the Cutler Formation (presently as thick as 8,000 feet; 2,438 meters) formed as a result of deposition of arkosic sediments; however, the original thickness of the Cutler is unknown due to an unconformity at its top. In the area of the Reservation the Cutler has group status and has been divided into several formations: the Halgaito Formation (350-800 feet; 107-244 meters), Cedar Mesa Sandstone and equivalent rocks (150-350 feet; 46-107 meters), Organ Rock Formation (500-900 feet; 152-274 meters), and De Chelly Sandstone (0-100 feet; 0-30 meters). The sediments of these formations were deposited in a variety of environments, including eolian, mud-flat, and fluvial systems. Following an episode of erosion in the Early and Middle(?) Triassic, deposition in the area of the Southern Ute Reservation continued during the Mesozoic. Sediments of the Upper Triassic Dolores and correlative Chinle Formations were deposited in fluvial, lacustrine, and minor eolian environments. On the Reservation the Dolores is 500-1,200 feet (152-366 meters) thick. Lower Jurassic eolian and fluvial deposits may have been present in much of the Reservation area but have been removed

Preliminary Geologic Map of the Thousand Oaks 7.5' Quadrangle, Southern California: A Digital Database

USGS Publications Warehouse

Yerkes, R.F.; Campbell, Russell H.

1995-01-01

Thousand Oaks is located in Arroyo Conejo, a region spanning both southeastern Ventura County and extreme northwest Los Angeles County in southern California. It was discovered in 1542 by Spanish explorer Juan Rodriquez Cabrillo and eventually became part of the Spanish Rancho El Conejo land grant (conejo means 'rabbit' in Spanish, of which there are many in the area). It is located in the Santa Monica Mountains in the northwestern part of the greater Los Angeles area. The area is bordered by the San Fernando Valley and the city of Los Angeles to the east, Simi Hills to the north, Las Posas Hills and the Santa Rosa Valley to the northwest, Conejo Mountain (also known as Conejo Hills) and Oxnard Plain to the west, and the Santa Monica Mountains and Malibu to the southwest. The geology of the surrounding Santa Monica Mountains is dominated by a sequence of Tertiary sedimentary and volcanic rocks. These include the Tertiary Modelo Formation and the upper part of the Topanga Formation, other minor Tertiary rocks, and Miocene volcanic and intrusive rocks of the Conejo Formation. The basement units within the Santa Monica Mountains are a series of Jurassic and Cretaceous sedimentary rocks. The volcanic rocks of the Conejo Formation underlies much of the surrounding watersheds. The younger Tertiary sedimentary Modelo and Upper Topanga Formations flank the Conejo to the north and south. On the north slope of the Santa Monica Mountains where the Arroyo Conejo and Thousand Oaks are located, the Tertiary formations are gently folded. The south flank of the Santa Monica Mountains is structurally dominated by the Malibu Coast Fault that runs along the foot of the mountains. This fault, and associated structures, creates a complex geologic setting on the south flank of the Santa Monica Mountains. The active nature of the Malibu Coast fault and associated structures accounts for the steep and rugged coastal topography. The most widely exposed rock units in the area are the Plio-Pleistocene marine and nonmarine Pico and Saugus formations, which crop out on the southern flank of South Mountain-Oak Ridge and on the Las Posas uplands and Las Posas Hills. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southeast corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Formation into a local trough during Saugus time. Eroded from, and overlying, these bedrock formations are a series of recent alluvial units. These alluvial units include Quaternary alluvium comprised of alluvium, stream deposits, alluvial fan and floodplain deposits, beach deposits, dissected older alluvial deposits. Also present are Quaternary landslides and colluvium composed of landslide deposits and colluvium deposits. The colluvium represents relatively thick continuous deposits of soil and rock fragments that are common on the steep slopes of the coastal canyons, and generally feed the many landslides, soil slips, and debris flows.

Stratigraphy of Slick Rock district and vicinity, San Miguel and Dolores Counties, Colorado

USGS Publications Warehouse

Shawe, Daniel R.; Simmons, George C.; Archbold, Norbert L.

1968-01-01

The Slick Rock district covers about 570 square miles in western San Miguel and Dolores Counties, in southwestern Colorado. It is at the south edge of the salt-anticline region of southwestern Colorado and southeastern Utah and of the Uravan mineral belt.Deposition of Paleozoic sedimentary rocks in the district and vicinity was principally controlled by development of the Paradox Basin, and of Mesozoic rocks by development of a depositional basin farther west. The Paleozoic rocks generally are thickest at the northeast side of the Paradox Basin in a northwest- trending trough which seems to be a wide graben in Precambrian igneous and metamorphic basement rocks; Mesozoic rocks generally thicken westward and southwestward from the district.Sedimentary rocks rest on a Precambrian basement consisting of a variety of rocks, including granite and amphibolite. The surface of the Precambrian rocks is irregular and generally more than 2,000 feet below sea level and 7,000-11,000 feet below the ground surface. In the northern part of the district the Precambrian surface plunges abruptly northeastward into the trough occupying the northeast side of the Paradox Basin, and in the southern part it sags in a narrow northeasterly oriented trough. Deepening of both troughs, or crustal deformation in their vicinity, influenced sedimentation during much of late Paleozoic and Mesozoic time.The maximum total thickness of sedimentary rocks underlying the district is 13,000 feet, and prior to extensive erosion in the late Tertiary and the Quaternary it may have been as much as about 18,000 feet. The lower 5,000 feet or more of the sequence of sedimentary rocks consists of arenaceous strata of early Paleozoic age overlain by dominantly marine carbonate rocks and evaporite beds interbedded with lesser amounts of clastic sediments of late Paleozoic age. Overlying these rocks is about 4,500 feet of terrestrial clastic sediments, dominantly sandstone with lesser amounts of shale, mudstone, siltstone, and conglomerate, of late Paleozoic and Mesozoic age. Above these rocks is as much as 2,300 feet of marine shale of late Mesozoic age. Perhaps about 5,000 feet of clastic sedimentary rocks, dominantly sandstone and in part shale, of late Mesozoic and early Cenozoic age, overlay the older rocks of the district prior to late Cenozoic erosion...Outside the Slick Rock district the Mancos Shale is overlain by dominantly terrestrial sandstone, mudstone, and coaly beds of the Mesaverde Group of Late Cretaceous age, and younger units such as the Wasatch and Green River Formations of Tertiary age, which once may have extended across the district. These units, totaling possibly 5,000 feet in thickness, were removed by erosion following middle Tertiary uplift of the Colorado Plateau.Igneous rocks of Tertiary age crop out in only one small area in the district, but they are intruded extensively in the Mancos Shale east of the district, and, as shown by deep oil test wells, appear to be intruded widely in the Paradox Member of the Hermosa Formation in the southern part of the district and southeast of the district. Andesite porphyry occurs in a dike on Glade Mountain, microgranogabbro and microgranodiorite occur in thin sills east of the district, and rocks of similar composition form thick sills in the subsurface. All are similar chemically to igneous rocks in the San Juan Mountains southeast of the district and probably were the result of a specific igneous episode. They were intruded most likely during the Miocene.Surficial deposits of Quaternary age include glacial till, terrace gravels, alluvial fans, landslide debris, loess, other soil, alluvium, colluvium, and talus. On Glade Mountain, glacial till of probable early Pleistocene age merges westward with terrace gravels that are correlative with terrace gravels which lie on an old weathered surface of Mancos Shale farther west on the rim of the Dolores River Canyon.

Hard-rock jetting. Part 2. Rock type decides jetting economics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pols, A.C.

1977-02-07

In Part 2, Koninklijke Shell Exploratie en Produktie Laboratorium presents the results of jet-drilling laminated formations. Shell concludes that (1) hard, laminated rock cannot be jet-drilled satisfactorily without additional mechanical cutting aids, (2) the increase in penetration rate with bit-pressure drop is much lower for impermeable rock than it is for permeable rock, (3) drilling mud can have either a positive or a negative effect on penetration rate in comparison with water, depending on the material drilled, and (4) hard, isotropic, sedimentary, impermeable rock can be drilled using jets at higher rates than with conventional means. However, jetting becomes profitablemore » only in the case of expensive rigs.« less

Classification scheme for sedimentary and igneous rocks in Gale crater, Mars

NASA Astrophysics Data System (ADS)

Mangold, N.; Schmidt, M. E.; Fisk, M. R.; Forni, O.; McLennan, S. M.; Ming, D. W.; Sautter, V.; Sumner, D.; Williams, A. J.; Clegg, S. M.; Cousin, A.; Gasnault, O.; Gellert, R.; Grotzinger, J. P.; Wiens, R. C.

2017-03-01

Rocks analyzed by the Curiosity rover in Gale crater include a variety of clastic sedimentary rocks and igneous float rocks transported by fluvial and impact processes. To facilitate the discussion of the range of lithologies, we present in this article a petrological classification framework adapting terrestrial classification schemes to Mars compositions (such as Fe abundances typically higher than for comparable lithologies on Earth), to specific Curiosity observations (such as common alkali-rich rocks), and to the capabilities of the rover instruments. Mineralogy was acquired only locally for a few drilled rocks, and so it does not suffice as a systematic classification tool, in contrast to classical terrestrial rock classification. The core of this classification involves (1) the characterization of rock texture as sedimentary, igneous or undefined according to grain/crystal sizes and shapes using imaging from the ChemCam Remote Micro-Imager (RMI), Mars Hand Lens Imager (MAHLI) and Mastcam instruments, and (2) the assignment of geochemical modifiers based on the abundances of Fe, Si, alkali, and S determined by the Alpha Particle X-ray Spectrometer (APXS) and ChemCam instruments. The aims are to help understand Gale crater geology by highlighting the various categories of rocks analyzed by the rover. Several implications are proposed from the cross-comparisons of rocks of various texture and composition, for instance between in place outcrops and float rocks. All outcrops analyzed by the rover are sedimentary; no igneous outcrops have been observed. However, some igneous rocks are clasts in conglomerates, suggesting that part of them are derived from the crater rim. The compositions of in-place sedimentary rocks contrast significantly with the compositions of igneous float rocks. While some of the differences between sedimentary rocks and igneous floats may be related to physical sorting and diagenesis of the sediments, some of the sedimentary rocks (e.g., potassic rocks) cannot be paired with any igneous rocks analyzed so far. In contrast, many float rocks, which cannot be classified from their poorly defined texture, plot on chemistry diagrams close to float rocks defined as igneous from their textures, potentially constraining their nature.

Classification scheme for sedimentary and igneous rocks in Gale crater, Mars

DOE PAGES

Mangold, Nicolas; Schmidt, Mariek E.; Fisk, Martin R.; ...

2016-11-05

Rocks analyzed by the Curiosity rover in Gale crater include a variety of clastic sedimentary rocks and igneous float rocks transported by fluvial and impact processes. Here, to facilitate the discussion of the range of lithologies, we present in this article a petrological classification framework adapting terrestrial classification schemes to Mars compositions (such as Fe abundances typically higher than for comparable lithologies on Earth), to specific Curiosity observations (such as common alkali-rich rocks), and to the capabilities of the rover instruments. Mineralogy was acquired only locally for a few drilled rocks, and so it does not suffice as a systematicmore » classification tool, in contrast to classical terrestrial rock classification. The core of this classification involves (1) the characterization of rock texture as sedimentary, igneous or undefined according to grain/crystal sizes and shapes using imaging from the ChemCam Remote Micro-Imager (RMI), Mars Hand Lens Imager (MAHLI) and Mastcam instruments, and (2) the assignment of geochemical modifiers based on the abundances of Fe, Si, alkali, and S determined by the Alpha Particle X-ray Spectrometer (APXS) and ChemCam instruments. The aims are to help understand Gale crater geology by highlighting the various categories of rocks analyzed by the rover. Several implications are proposed from the cross-comparisons of rocks of various texture and composition, for instance between in place outcrops and float rocks. All outcrops analyzed by the rover are sedimentary; no igneous outcrops have been observed. However, some igneous rocks are clasts in conglomerates, suggesting that part of them are derived from the crater rim. The compositions of in-place sedimentary rocks contrast significantly with the compositions of igneous float rocks. While some of the differences between sedimentary rocks and igneous floats may be related to physical sorting and diagenesis of the sediments, some of the sedimentary rocks (e.g., potassic rocks) cannot be paired with any igneous rocks analyzed so far. Finally, in contrast, many float rocks, which cannot be classified from their poorly defined texture, plot on chemistry diagrams close to float rocks defined as igneous from their textures, potentially constraining their nature.« less

Classification scheme for sedimentary and igneous rocks in Gale crater, Mars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mangold, Nicolas; Schmidt, Mariek E.; Fisk, Martin R.

Rocks analyzed by the Curiosity rover in Gale crater include a variety of clastic sedimentary rocks and igneous float rocks transported by fluvial and impact processes. Here, to facilitate the discussion of the range of lithologies, we present in this article a petrological classification framework adapting terrestrial classification schemes to Mars compositions (such as Fe abundances typically higher than for comparable lithologies on Earth), to specific Curiosity observations (such as common alkali-rich rocks), and to the capabilities of the rover instruments. Mineralogy was acquired only locally for a few drilled rocks, and so it does not suffice as a systematicmore » classification tool, in contrast to classical terrestrial rock classification. The core of this classification involves (1) the characterization of rock texture as sedimentary, igneous or undefined according to grain/crystal sizes and shapes using imaging from the ChemCam Remote Micro-Imager (RMI), Mars Hand Lens Imager (MAHLI) and Mastcam instruments, and (2) the assignment of geochemical modifiers based on the abundances of Fe, Si, alkali, and S determined by the Alpha Particle X-ray Spectrometer (APXS) and ChemCam instruments. The aims are to help understand Gale crater geology by highlighting the various categories of rocks analyzed by the rover. Several implications are proposed from the cross-comparisons of rocks of various texture and composition, for instance between in place outcrops and float rocks. All outcrops analyzed by the rover are sedimentary; no igneous outcrops have been observed. However, some igneous rocks are clasts in conglomerates, suggesting that part of them are derived from the crater rim. The compositions of in-place sedimentary rocks contrast significantly with the compositions of igneous float rocks. While some of the differences between sedimentary rocks and igneous floats may be related to physical sorting and diagenesis of the sediments, some of the sedimentary rocks (e.g., potassic rocks) cannot be paired with any igneous rocks analyzed so far. Finally, in contrast, many float rocks, which cannot be classified from their poorly defined texture, plot on chemistry diagrams close to float rocks defined as igneous from their textures, potentially constraining their nature.« less

Reconnaissance geologic map of the Hyampom 15' quadrangle, Trinity County, California

USGS Publications Warehouse

Irwin, William P.

2010-01-01

The Hyampom 15' quadrangle lies west of the Hayfork 15' quadrangle in the southern part of the Klamath Mountains geologic province of northern California. It spans parts of four generally northwest-trending tectono- stratigraphic terranes of the Klamath Mountains, the Eastern Hayfork, Western Hayfork, Rattlesnake Creek, and Western Jurassic terranes, as well as, in the southwest corner of the quadrangle, a small part of the Pickett Peak terrane of the Coast Range province. Remnants of the Cretaceous Great Valley overlap sequence that once covered much of the pre-Cretaceous bedrock of the quadrangle are now found only as a few small patches in the northeast corner of the quadrangle. Fluvial and lacustrine deposits of the mid-Tertiary Weaverville Formation crop out in the vicinity of the village of Hyampom. The Eastern Hayfork terrane is a broken formation and m-lange of volcanic and sedimentary rocks that include blocks of chert and limestone. The chert has not been sampled; however, chert from the same terrane in the Hayfork quadrangle contains radiolarians of Permian and Triassic ages, but none clearly of Jurassic age. Limestone at two localities contains late Paleozoic foraminifers. Some of the limestone from the Eastern Klamath terrane in the Hayfork quadrangle contains faunas of Tethyan affinity. The Western Hayfork terrane is part of an andesitic volcanic arc that was accreted to the western edge of the Eastern Hayfork terrane. It consists mainly of metavolcaniclastic andesitic agglomerate and tuff, as well as argillite and chert, and it includes the dioritic Ironside Mountain batholith that intruded during Middle Jurassic time (about 170 Ma). This intrusive body provides the principal constraint on the age of the terrane. The Rattlesnake Creek terrane is a melange consisting mostly of highly dismembered ophiolite. It includes slabs of serpentinized ultramafic rock, basaltic volcanic rocks, radiolarian chert of Triassic and Jurassic ages, limestone containing Late Triassic conodonts and Permian or Triassic foraminifers, and small exotic(?) plutons. The plutons probably are similar to ones to the southeast beyond the quadrangle boundary that yielded isotopic ages ranging from 193 Ma to 207 Ma. The Rattlesnake Creek terrane contains several areas of well- bedded sedimentary rocks (rcs) that somewhat resemble the Galice(?) Formation and may be inliers of the Western Jurassic terrane. The Western Jurassic terrane in the Hyampom quadrangle appears to consist only of a narrow tectonic sliver of slaty to semischistose detrital sedimentary rocks of the Late Jurassic Galice(?) Formation. The isotopic age of metamorphism of the rocks is about 150 Ma, which probably indicates when the terrane was accreted to the Rattlesnake Creek terrane. The Pickett Peak terrane, which is the most westerly of the succession of terranes in the Hyampom quadrangle, is the accreted eastern margin of the Coast Ranges province. It mainly consists of semischistose and schistose metagraywacke of the South Fork Mountain Schist and locally contains the blueschist-facies mineral lawsonite. Isotopic analysis indicates a metamorphic age of 120 to 115 Ma. During the Cretaceous period, much of the southern fringe of the Klamath Mountains was onlapped by sedimentary strata of the Great Valley sequence. However, much of the onlapping Cretaceous strata has since been eroded away, and in the Hyampom quadrangle only a few small remnants are found in the northeast corner near Big Bar. Near the west edge of the quadrangle, in the vicinity of the village of Hyampom, weakly consolidated fluvial and lacustrine rocks and coaly deposits of Oligocene and (or) Miocene age are present. These rocks are similar to the Weaverville Formation that occurs in separate sedimentary basins to the east in the Weaverville and Hayfork 15? quadrangles. This map of the Hyampom 15' quadrangle is a digital version of U.S. Geological Survey Miscellaneous Field Stu

Poisson's Ratio and Auxetic Properties of Natural Rocks

NASA Astrophysics Data System (ADS)

Ji, Shaocheng; Li, Le; Motra, Hem Bahadur; Wuttke, Frank; Sun, Shengsi; Michibayashi, Katsuyoshi; Salisbury, Matthew H.

2018-02-01

Here we provide an appraisal of the Poisson's ratios (υ) for natural elements, common oxides, silicate minerals, and rocks with the purpose of searching for naturally auxetic materials. The Poisson's ratios of equivalently isotropic polycrystalline aggregates were calculated from dynamically measured elastic properties. Alpha-cristobalite is currently the only known naturally occurring mineral that has exclusively negative υ values at 20-1,500°C. Quartz and potentially berlinite (AlPO4) display auxetic behavior in the vicinity of their α-β structure transition. None of the crystalline igneous and metamorphic rocks (e.g., amphibolite, gabbro, granite, peridotite, and schist) display auxetic behavior at pressures of >5 MPa and room temperature. Our experimental measurements showed that quartz-rich sedimentary rocks (i.e., sandstone and siltstone) are most likely to be the only rocks with negative Poisson's ratios at low confining pressures (≤200 MPa) because their main constituent mineral, α-quartz, already has extremely low Poisson's ratio (υ = 0.08) and they contain microcracks, micropores, and secondary minerals. This finding may provide a new explanation for formation of dome-and-basin structures in quartz-rich sedimentary rocks in response to a horizontal compressional stress in the upper crust.

Geology and energy resources of the Sand Butte Rim NW Quadrangle, Sweetwater County, Wyoming

USGS Publications Warehouse

Roehler, Henry W.

1979-01-01

The Sand Butte Rim NW 71-minute quadrangle occupies 56 square miles of an arid, windy, sparsely vegetated area of ridges and valleys on the east flank of the Rock Springs uplift in southwest Wyoming. The area is underlain by a succession of sedimentary rocks, about 20,000 feet thick, that includes 28 formations ranging in age from Cambrian to Tertiary. Upper Cretaceous and lower Tertiary formations crop out and dip 3?-6? southeast. They are unfaulted and generally homoclinal, but a minor anticlinal nose is present. Older rocks in the subsurface are faulted and folded. Coal resources are estimated to be nearly I billion short tons of subbituminous coal, in beds more than 2.5 feet thick, under less than 3,000 feet of overburden, in the Fort Union Formation of Paleocene age and the Lance and Almond Formations of Cretaceous age.

Timing and implications for the late Mesozoic geodynamic settings of eastern North China Craton: Evidences from K-Ar dating age and sedimentary-structural characteristics records of Lingshan Island, Shandong Province

NASA Astrophysics Data System (ADS)

Li, Jie; Jin, Aiwen; Hou, Guiting

2017-12-01

The Lingshan Island in Shandong Province in the eastern North China Craton, well known for the Late Mesozoic multi-scale slide-slump structures is related to paleo-earthquake. Terrigenous clastic rocks, volcanic clastic rocks and volcanic lavas are extensively exposed in the Lingshan Island and its adjacent regions of the Shandong Province, which led to fierce debates on their ages, sedimentary characteristics and tectono-sedimentary evolution. In this contribution, we present the characteristics of the Late Mesozoic stratigraphy in the Lingshan Island. Whole-rock K-Ar dating of dyke at Beilaishi and rhyolites at Laohuzui of the Lingshan Island yielded ages of 159 Ma and 106-92 Ma which coincides with the Laiyang Period rifting and the Qingshan Period rifting in the Jiaolai Basin, respectively. On the basis of the analysis to the Late Mesozoic sedimentary environment of `flysch' and `molasse'-like formations as well as tectonic stress fields reconstruction, four episodes of the tectono-sedimentary evolution were established in the Lingshan Island and its adjacent regions in the eastern North China Craton. They consist of two episodes of extensional events for the syn-rift, and two episodes of compression events for the inversion of the post-rift. The entire episodes can be summarized as follows: (1) the first syn-rift NW-SE extension in Laiyang Period can be identified by the `flysch' formation (Unit 1) and by emplacement of the NE-trending dyke in the Laiyang Group. This syn-rift episode can be related to the NW-SE post-orogenic extension resulted from the gravity collapse of the thickened lithosphere along the Sulu Orogen. (2) The first post-rift NW-SE inversion, which was caused by the NW-directed subduction of Izanaqi Plate, can be well documented by the `X' type conjugate joints as well as slide slump folds in Unit 1. (3) The second syn-rift NW-SE extension in Qingshan Period is characterized by rhyolite rocks (Unit 2). This syn-rift episode can be considered to be associated with lithospheric delamination of the thickened lithosphere in the eastern North China Craton. And finally, (4) the second post-rift NW-SE inversion which resulted from the subduction of the Pacific Plate under the eastern North China Craton in the NW direction at the end of the Qingshan Period is recorded by `molasse'-like formation (Unit 3).

Geology of parts of the Johnny Gulch quadrangle, Montana

USGS Publications Warehouse

Freeman, Val L.

1954-01-01

An area of about 35 square miles, situated about 30 miles southeast of Helena, Montana, was mapped during the summer of 1952 at a scale of l:24, 000. The area includes a part of the eastern foothills of the Elkhorn Mountains, and is underlain by sedimentary mad volcanic rocks of Cretaceous age that were intruded during late Cretaceous or early Tertiary time by several types of igneous rocks. The oldest rocks in the map area are the nonmarine sandstone, shale, and limestone of the Kootenai formation. These are overlain disconformably by the black shale siltstone, sandstone, and siliceous mudstone of the Colorado group that is subdivided into three map units; a lower black shale unit composed of black shale and silty shale with a basal clean sandstone, all of probable marine origin; a middle siliceous unit composed of sandstone, siltstone, and siliceous mudstone of both marine and nonmarine origin; and an upper black unit composed of black shale of marine origin. Conformably above the Colorado group are crystal lithic turfs of the Slim Sam formation; in places theme grade into and in other places are unconformably overlain by the Elkhorn Mountains volcanics composed of crystal tuff, breccia, flows, and bedded tuff of andesitic composition. The rocks of the Elkhorn Mountains volcanics and older formations have been intruded by diorite porphyry and related rocks and by hornblende quartz monzonite. The diorite porphyry and related rocks include hornblende diorite porphyry, hornblende augite diorite porphyry, augite diorite porphyry, and basalt. Resting with marked unconformity upon older rocks are volcanic sedimentary rocks of early Tertiary age that are locally overlain by thin rhyolite flows. Late Tertiary and Quaternary fans overlie the rhyolite flows. Alluvium, talus, and other mantle are present in small amounts in many parts of the area. The sedimentary rocks of the area mapped form a part of the east flank of a major anticline. A major north-south syncline to the north of map area is believed to have been deflected to the east of the area because of the rigidity of large irregular plutons of diorite porphyry. The location of the plutons may have been controlled by the initiation of the major syncline, by a postulated pre-intrusive fault, or by both. Most of the small-scale structural features are related to the emplacement of the plutons. During emplacement the intruded sediments yielded either by faulting or by folding; the deeper rocks failed by faulting and the shallower rocks failed by folding. The area contains deposits of gold, silver, copper, lead, and zinc, none of which are currently being mined; and a deposit of magnetite which is being mined for use in cement.

Subsurface Rock Physical Properties by Downhole Loggings - Case Studies of Continental Deep Drilling in Kanto Distinct, Japan

NASA Astrophysics Data System (ADS)

Omura, K.

2014-12-01

In recent years, many examples of physical logging have been carried out in deep boreholes. The loggings are direct in-situ measurements of rock physical properties under the ground. They provide significant basic data for the geological, geophysical and geotechnical investigations, e.g., tectonic history, seismic wave propagation, and ground motion prediction. Since about 1980's, Natl. Res. Inst. for Earth Sci. and Disast. Prev. (NIED) dug deep boreholes (from 200m to 3000m depth) in sedimentary basin of Kanto distinct, Japan, for purposes of installing seismographs and hydrological instruments, and in-situ stress and pore pressure measurements. At that time, downhole physical loggings were conducted in the boreholes: spontaneous potential, electrical resistance, elastic wave velocity, formation density, neutron porosity, total gamma ray, caliper, temperature loggings. In many cases, digital data values were provided every 2m or 1m or 0.1m. In other cases, we read printed graphs of logging plots and got digital data values. Data from about 30 boreholes are compiled. Especially, particular change of logging data at the depth of an interface between a shallow part (soft sedimentary rock) and a base rock (equivalent to hard pre-Neogene rock) is examined. In this presentation, the correlations among physical properties of rock (especially, formation density, elastic wave velocity and electrical resistance) are introduced and the relation to the lithology is discussed. Formation density, elastic wave velocity and electric resistance data indicate the data are divide in two groups that are higher or lower than 2.5g/cm3: the one correspond to a shallow part and the other correspond to a base rock part. In each group, the elastic wave velocity and electric resistance increase with increase of formation density. However the rates of increases in the shallow part are smaller than in the base rock part. The shallow part has lower degree of solidification and higher porosity than that in the base rock part. It appears differences in the degree of solidification and/or porosity are related to differences in the increasing rates. The present data show that the physical logging data are effective information to explore where the base rock is and what properties of the base rock are different from those in the shallow part.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narr, W.; Currie, J.B.

The occurrence of natural fracture systems in subsurface rock can be predicted if careful evaluation is made of the ecologic processes that affect sedimentary strata during their cycle of burial, diagenesis, uplift, and erosional unloading. Variations in the state of stress within rock arise, for example, from changes in temperature, pore pressure, weight of overburden, or tectonic loading. Hence geologic processes acting on a sedimentary unit should be analyzed for their several contributions to the state of stress, and this information used to compute a stress history. From this stress history, predictions may be made as to when in themore » burial cycle to expect fracture (joint) formation, what type of fractures (extension or shear) may occur, and which geologic factors are most favorable to development of fractures. A stress history is computed for strata of the naturally fractured Altamont oil field in Utah's Uinta basin. Calculations suggest that fractures formed in extension, that the well-cemented rocks are those most likely to be fractured, that fractures began to develop only after stata were uplifted and denuded of overburden. Geologic evidence on fracture genesis and development is in accord with the stress history prediction. Stress history can be useful in evaluating a sedimentary basin for naturally fractured reservoir exploration plays.« less

Zeolites replacing plant fossils in the Denver formation, Lakewood, Colorado.

USGS Publications Warehouse

Modreski, P.J.; Verbeek, E.R.; Grout, M.A.

1984-01-01

Well-developed crystals of heulandite and stilbite, within fossil wood, occur in sedimentary rocks in Lakewood, Jefferson County. The rocks belong to the Denver formation, a locally fossiliferous deposit of fluvial claystone, siltstone, sandstone and conglomerate, containing some volcanic mudflows (andesitic) of late Cretaceous to Palaeocene age. Altered volcanic glass released Na and Ca into the ground-water and subsequently zeolites were crystallized in the open spaces between grains and within fossil plant structures. Minor pyrite, quartz (jasper), calcite and apatite also occur as replacements of fossil wood. Similar zeolite occurrences in other areas are reviewed.-R.S.M.

Workshop on the Early Earth: The Interval from Accretion to the Older Archean

NASA Technical Reports Server (NTRS)

Burke, K. (Editor); Ashwal, L. D. (Editor)

1985-01-01

Presentation abstracts are compiled which address various issues in Earth developmental processes in the first one hundred million years. The session topics included: accretion of the Earth (processes accompanying immediately following the accretion, including core formation); impact records and other information from planets and the Moon relevant to early Earth history; isotopic patterns of the oldest rocks; and igneous, sedimentary, and metamorphic petrology of the oldest rocks.

Mesozoic–Cenozoic Climate and Neotectonic Events as Factors in Reconstructing the Thermal History of the Source-Rock Bazhenov Formation, Arctic Region, West Siberia, by the Example of the Yamal Peninsula

NASA Astrophysics Data System (ADS)

Isaev, V. I.; Iskorkina, A. A.; Lobova, G. A.; Starostenko, V. I.; Tikhotskii, S. A.; Fomin, A. N.

2018-03-01

Schemes and criteria are developed for using the measured and modeled geotemperatures for studying the thermal regime of the source rock formations, as well as the tectonic and sedimentary history of sedimentary basins, by the example of the oil fields of the Yamal Peninsula. The method of paleotemperature modeling based on the numerical solution of the heat conduction equation for a horizontally layered solid with a movable upper boundary is used. The mathematical model directly includes the climatic secular trend of the Earth's surface temperature as the boundary condition and the paleotemperatures determined from the vitrinite reflectance as the measurement data. The method does not require a priori information about the nature and intensities of the heat flow from the Earth's interior; the flow is determined by solving the inverse problem of geothermy with a parametric description of the of the sedimentation history and the history of the thermophysical properties of the sedimentary stratum. The rate of sedimentation is allowed to be zero and negative which provides the possibility to take into account the gaps in sedimentation and denudation. The formation, existence, and degradation of the permafrost stratum and ice cover are taken into account as dynamical lithological-stratigraphic complexes with anomalously high thermal conductivity. It is established that disregarding the paleoclimatic factors precludes an adequate reconstruction of thermal history of the source-rock deposits. Revealing and taking into account the Late Eocene regression provided the computationally optimal and richest thermal history of the source-rock Bazhenov Formation, which led to more correct volumetric-genetic estimates of the reserves. For estimating the hydrocarbon reserves in the land territories of the Arctic region of West Siberia by the volumetric-genetic technique, it is recommended to use the Arctic secular trend of temperatures and take into account the dynamics of the Neoplesitocene permafrost layers 300-600 m thick. Otherwise, the calculated hydrocarbon reserves could be underestimated by up to 40%.

87Sr/86Sr ratios in some eugeosynclinal sedimentary rocks and their bearing on the origin of granitic magma in orogenic belts

USGS Publications Warehouse

Peterman, Z.E.; Hedge, C.E.; Coleman, R.G.; Snavely, P.D.

1967-01-01

Rb and Sr contents and 87Sr/86Sr values were determined for samples of eugeosynclinal sedimentary rocks, mostly graywackes, from Oregon and California. These data are compatible with the theory of anataxis of eugeosynclinal sedimentary rocks in orogenic belts to produce granitic magmas provided that the melting occurs within several hundreds of m.y. after sedimentation. The low (87Sr/86Sr)0 values of the eugeosynclinal sedimentary rocks are related to the significant amounts of volcanogenic detritus present which probably were originally derived from the mantle. ?? 1967.

Clumped isotope thermometry in deeply buried sedimentary carbonates: The effects of C-O bond reordering and recrystallization

NASA Astrophysics Data System (ADS)

Passey, B. H.; Shenton, B.; Grossman, E. L.; Henkes, G. A.; Laya, J. C.; Perez-Huerta, A.

2014-12-01

Constraining the thermal histories of sedimentary basins is fundamental to a range of geologic applications including tectonics, petroleum system analysis, and the genesis of ore deposits. Carbonate rocks can serve as archives of basin thermal histories through solid-state reordering of their 13C-18O, or 'clumped isotope', bonds at elevated burial temperatures. Here we present one of the first applied studies of carbonate clumped isotope reordering to explore the diagenetic and thermal histories of exhumed brachiopods, crinoids, cements, and host rock in the Permian Palmarito Formation, Venezuela and the Carboniferous Bird Spring Formation, Nevada, USA. Carbonate components in the Palmarito Formation, buried to ~4 km depth, yield statistically indistinguishable clumped isotope temperatures (T(Δ47)) ranging from 86 to 122 °C. Clumped isotope temperatures of components in the more deeply buried Bird Spring Formation (>5 km), range from ~100 to 165 °C and differ by component type, with brachiopods and pore-filling cements yielding the highest T(Δ47) (mean = 153 and 141 °C, respectively) and crinoids and host rock yielding significantly cooler T(Δ47) (mean = 103 and 114 °C). New high-resolution thermal histories are coupled with kinetic models to predict the extent of solid-state C-O bond reordering during burial and exhumation for both sites. Application of these models suggests that brachiopods in the Palmarito Formation experienced partial bond reordering without complete equilibration of clumped isotopes at maximum burial temperature. In contrast, clumped isotope bonds of brachiopods from the Bird Spring Formation appear to have completely equilibrated at maximum burial temperature, and now reflect blocking temperatures 'locked-in' during cooling. The 40-50 °C cooler clumped isotope temperatures measured in Bird Spring Formation crinoids and host rock can be explained by both recrystallization and cementation during shallow burial and a greater inherent resistance to solid-state reordering than brachiopods.

Fracture control of ground water flow and water chemistry in a rock aquitard.

PubMed

Eaton, Timothy T; Anderson, Mary P; Bradbury, Kenneth R

2007-01-01

There are few studies on the hydrogeology of sedimentary rock aquitards although they are important controls in regional ground water flow systems. We formulate and test a three-dimensional (3D) conceptual model of ground water flow and hydrochemistry in a fractured sedimentary rock aquitard to show that flow dynamics within the aquitard are more complex than previously believed. Similar conceptual models, based on regional observations and recently emerging principles of mechanical stratigraphy in heterogeneous sedimentary rocks, have previously been applied only to aquifers, but we show that they are potentially applicable to aquitards. The major elements of this conceptual model, which is based on detailed information from two sites in the Maquoketa Formation in southeastern Wisconsin, include orders of magnitude contrast between hydraulic diffusivity (K/S(s)) of fractured zones and relatively intact aquitard rock matrix, laterally extensive bedding-plane fracture zones extending over distances of over 10 km, very low vertical hydraulic conductivity of thick shale-rich intervals of the aquitard, and a vertical hydraulic head profile controlled by a lateral boundary at the aquitard subcrop, where numerous surface water bodies dominate the shallow aquifer system. Results from a 3D numerical flow model based on this conceptual model are consistent with field observations, which did not fit the typical conceptual model of strictly vertical flow through an aquitard. The 3D flow through an aquitard has implications for predicting ground water flow and for planning and protecting water supplies.

Fracture control of ground water flow and water chemistry in a rock aquitard

USGS Publications Warehouse

Eaton, T.T.; Anderson, M.P.; Bradbury, K.R.

2007-01-01

There are few studies on the hydrogeology of sedimentary rock aquitards although they are important controls in regional ground water flow systems. We formulate and test a three-dimensional (3D) conceptual model of ground water flow and hydrochemistry in a fractured sedimentary rock aquitard to show that flow dynamics within the aquitard are more complex than previously believed. Similar conceptual models, based on regional observations and recently emerging principles of mechanical stratigraphy in heterogeneous sedimentary rocks, have previously been applied only to aquifers, but we show that they are potentially applicable to aquitards. The major elements of this conceptual model, which is based on detailed information from two sites in the Maquoketa Formation in southeastern Wisconsin, include orders of magnitude contrast between hydraulic diffusivity (K/Ss) of fractured zones and relatively intact aquitard rock matrix, laterally extensive bedding-plane fracture zones extending over distances of over 10 km, very low vertical hydraulic conductivity of thick shale-rich intervals of the aquitard, and a vertical hydraulic head profile controlled by a lateral boundary at the aquitard subcrop, where numerous surface water bodies dominate the shallow aquifer system. Results from a 3D numerical flow model based on this conceptual model are consistent with field observations, which did not fit the typical conceptual model of strictly vertical flow through an aquitard. The 3D flow through an aquitard has implications for predicting ground water flow and for planning and protecting water supplies. ?? 2007 National Ground Water Association.

Pore water colloid properties in argillaceous sedimentary rocks.

PubMed

Degueldre, Claude; Cloet, Veerle

2016-11-01

The focus of this work is to evaluate the colloid nature, concentration and size distribution in the pore water of Opalinus Clay and other sedimentary host rocks identified for a potential radioactive waste repository in Switzerland. Because colloids could not be measured in representative undisturbed porewater of these host rocks, predictive modelling based on data from field and laboratory studies is applied. This approach allowed estimating the nature, concentration and size distributions of the colloids in the pore water of these host rocks. As a result of field campaigns, groundwater colloid concentrations are investigated on the basis of their size distribution quantified experimentally using single particle counting techniques. The colloid properties are estimated considering data gained from analogue hydrogeochemical systems ranging from mylonite features in crystalline fissures to sedimentary formations. The colloid concentrations were analysed as a function of the alkaline and alkaline earth element concentrations. Laboratory batch results on clay colloid generation from compacted pellets in quasi-stagnant water are also reported. Experiments with colloids in batch containers indicate that the size distribution of a colloidal suspension evolves toward a common particle size distribution independently of initial conditions. The final suspension size distribution was found to be a function of the attachment factor of the colloids. Finally, calculations were performed using a novel colloid distribution model based on colloid generation, aggregation and sedimentation rates to predict under in-situ conditions what makes colloid concentrations and size distributions batch- or fracture-size dependent. The data presented so far are compared with the field and laboratory data. The colloid occurrence, stability and mobility have been evaluated for the water of the considered potential host rocks. In the pore water of the considered sedimentary host rocks, the clay colloid concentration is expected to be very low (<1ppb, for 10-100nm) which restricts their relevance for radionuclide transport. Copyright © 2016. Published by Elsevier B.V.

JACK CREEK BASIN, MONTANA.

USGS Publications Warehouse

Kiilsgaard, Thor H.; Van Noy, Ronald M.

1984-01-01

A mineral survey of the Jack Creek basin area in Montana revealed that phosphate rock underlies the basin. The phosphate rock is in thin beds that dip steeply and are broken and offset by faults. These features plus the rugged topography of the region would make mining difficult; however, this study finds the area to have a probable mineral-resource potential for phosphate. Sedimentary rock formations favorable for oil and gas also underlie the basin. No oil or gas has been produced from the basin or from nearby areas in southwestern Montana, but oil and gas have been produced from the same favorable formations elsewhere in Montana. The possibility of oil and gas being produced from the basin is slight but it cannot be ignored.

A Review of Land and Stream Classifications in Support of Developing a National Ordinary High Water Mark (OHWM) Classification

DTIC Science & Technology

2014-08-01

northern Minnesota, Wisconsin, and Michigan. This region is dominated by igneous and metamorphic rock , with some sedimentary units and a generally...faulted igneous and metamorphic rocks and folded sediments in the Appalachians and flat-lying sedimentary rocks in the Plateau and Catskills. Streams...mixture of igneous, metamorphic , and sedimentary rocks . High relief and coarse materials are typical. Riffle and pool development is largely

Recent sedimentological studies of the Murray and Stimson formations and their implications for Gale crater evolution, Mars

NASA Astrophysics Data System (ADS)

Gupta, Sanjeev; Fedo, Chris; Grotzinger, John; Edgett, Ken; Vasavada, Ashwin

2017-04-01

The Mars Science Laboratory (MSL) Curiosity rover has been exploring sedimentary rocks on the lower north slope of Aeolis Mons since August 2014. Previous work has demonstrated a succession of sedimentary rock types deposited dominantly in river-delta settings (Bradbury group), and interfingering/overlying contemporaneous/younger lake settings (Murray formation, Mt. Sharp group). The Murray formation is unconformably overlain by the Stimson formation, an ancient aeolian sand lithology. Here, we describe the MSL team's most recent sedimentological findings regarding the Murray and Stimson formations. The Murray formation is of the order of 200 meters thick and formed dominantly of mudstones. The mudstone facies, originally identified at the Pahrump Hills field site, show abundant fine-scale planar laminations throughout the Murray formation succession and is interpreted to record deposition in an ancient lake system in Gale crater. Since leaving the Naukluft Plateau (Stimson formation rocks) and driving south-southeastwards and progressive stratigraphically upwards through the Murray succession, we have recognised a variety of additional facies have been recognized that indicate variability in the overall palaeoenvironmental setting. These facies include (1) cross-bedded siltstones to very fine-grained sandstones with metre-scale troughs that might represent aeolian sedimentation; (2) a heterolithic mudstone-sandstone facies with laminated fine-grained strata, cm-scale ripple cross-laminations in siltstone or very fine sandstone, and dm-scale cross-stratified siltstone and very fine grained sandstone. The palaeoenvironmental setting for the second facies remains under discussion. Our results show that Gale crater hosted lakes systems for millions to tens of millions of years, perhaps punctuated by drier intervals. Murray strata are unconformably overlain by the Stimson formation. Stimson outcrops are typically characterized by cross-bedded sandstones with cross-sets ranging between 40-80 cm thick (Fig. 2). Within the sets, cross-strata comprise repetitive laminations that are a few millimeters thick and typically sub-parallel. Cross-laminations downlap onto the underlying bounding surface with an asymptotic profile and are truncated at their top by an overlying bounding surface. Palaeocurrent analysis based on measurements of 117 foreset azimuths indicate a wind regime that drove dune migration towards the northeast. Cross sets are separated by erosional bounding surfaces, which are interpreted to represent interdune surfaces, which were formed by migrating dunes as they climbed over the stoss slope of a preceding dune, eroding its stoss and upper part of the lee slope. From analysis of the sedimentary architecture, and comparison with terrestrial aeolian strata, we interpret the Stimson formation to represent sands deposited in a dry-aeolian dune system. In summary, sedimentary observations by the Curiosity rover record a diverse range of palaeoenvironments and a rich geological history in strata preserved in lower Aeolis Mons.

Metamorphism and plutonism around the middle and south forks of the Feather River, California

USGS Publications Warehouse

Hietanen, Anna Martta

1976-01-01

The area around the Middle and South Forks of the Feather River provides information on metamorphic and igneous processes that bear on the origin of andesitic and granitic magmas in general and on the variation of their potassium content in particular. In the north, the area joins the Pulga and Bucks Lake quadrangles studied previously. Tectonically, this area is situated in the southern part of an arcuate segment of the Nevadan orogenic belt in the northwestern Sierra Nevada. The oldest rocks are metamorphosed calcalkaline island-arc-type andesite, dacite, and sodarhyolite with interbedded tuff layers (the Franklin Canyon Formation), all probably correlative with Devonian rocks in the Klamath Mountains. Younger rocks form a sequence of volcanic, volcaniclastic, and sedimentary rocks including some limestone (The Horseshoe Bend Formation), probably Permian in age. All the volcanic and sedimentary rocks were folded and recrystallized to the greenschist facies during the Nevadan (Jurassic) orogeny and were invaded by monzotonalitic magmas shortly thereafter. A second lineation and metamorphism to the epidote-amphibolite facies developed in a narrow zone around the plutons. In light of the concept of plate tectonics, it is suggested that the early (Devonian?) island-arc-type andesite, dacite, and sodarhyolite (the Franklin Canyon Formation) were derived from the mantle above a Benioff zone by partial melting of peridotite in hydrous conditions. The water was probably derived from an oceanic plate descending to the mantle. Later (Permian?) magmas were mainly basaltic; some discontinuous layers of potassium-rich rhyolite indicate a change into anhydrous conditions and a deeper level of magma generation. The plutonic magmas that invaded the metamorphic rocks at the end of the Jurassic may contain material from the mantle, the subducted oceanic lithosphere, and the downfolded metamorphic rocks. The ratio of partial melts from these three sources may have changed with time, giving rise to the diversity in composition of magmas.

Rapid extension in an Eocene volcanic arc: Structure and paleogeography of an intra-arc half graben in central Idaho

USGS Publications Warehouse

Janecke, S.U.; Hammond, B.F.; Snee, L.W.; Geissman, J.W.

1997-01-01

A study of extension, volcanism, and sedimentation in the middle Eocene Panther Creek half graben in central Idaho shows that it formed rapidly during an episode of voluminous volcanism. The east-southeast-tilted Panther Creek half graben developed across the northeast edge of the largest cauldron complex of the Challis volcanic field and along the northeast-trending Trans-Challis fault zone. Two normal fault systems bound the east side of the half graben. One fault system strikes northeast, parallel to the Trans-Challis fault zone, and the other strikes north to northwest. The geometry of the basin-fill deposits shows that movement on these two normal fault systems was synchronous and that both faults controlled the development of the Panther Creek half graben. Strikes of the synextension volcanic and sedimentary rocks are similar throughout the half graben, whereas dips decrease incrementally upsection from as much as 60?? to less than 10??. Previous K-Ar dates and a new 40Ar/39Ar plateau date from the youngest widespread tuff in the basin suggest that most of basin formation spanned 3 m.y. between about 47.7 Ma and 44.5 Ma. As much as 6.5 km of volcanic and sedimentary rocks were deposited during that time. Although rates of extension and subsidence were very high, intense volcanic activity continually filled the basin with ash-flow tuffs, outpacing subsidence and sedimentation, until the end of basin development. After the abrupt end of Challis volcanism, locally derived pebble to boulder conglomerate and massive, reworked ash accumulated in the half graben. These sedimentary rocks make up a small part of the basin fill in the Panther Creek half graben and were derived mainly from Proterozoic metasedimentary rocks uplifted in the footwall of the basin. The east-southeast tilt of the sedimentary rocks, their provenance and coarse grain size, and the presence of a gravity slide block derived from tilted volcanic rocks in the hanging wall attest to continued tectonism during conglomerate deposition. Provenance data from the sedimentary rocks imply that the highland in the footwall of the Panther Creek half graben was never thickly blanketed by synex-tension volcanic rocks, despite intense volcanic activity. Analysis of the Panther Creek half graben and other intra-arc rift basins supports previous interpretations that relative rates of volcanism and subsidence control the proportion of volcanic rocks deposited in intra-arc rifts.

Deciphering fluid sources of hydrothermal systems: A combined Sr- and S-isotope study on barite (Schwarzwald, SW Germany)

USGS Publications Warehouse

Staude, S.; Gob, S.; Pfaff, K.; Strobele, F.; Premo, W.R.; Markl, G.

2011-01-01

Primary and secondary barites from hydrothermal mineralizations in SW Germany were investigated, for the first time, by a combination of strontium (Sr) isotope systematics (87Sr/86Sr), Sr contents and δ34S values to distinguish fluid sources and precipitation mechanisms responsible for their formation. Barite of Permian age derived its Sr solely from crystalline basement rocks, whereas all younger barite also incorporate Sr from formation waters of the overlying sediments. In fact, most of the Sr in younger barite is leached from Lower and Middle Triassic sediments. In contrast, most of the sulfur (S) of Permian, Jurassic and northern Schwarzwald Miocene barite originated from basement rocks. The S source of Upper Rhinegraben (URG)-related Paleogene barite differs depending on geographic position: for veins of the southern URG, it is the Oligocene evaporitic sequence, while central URG mineralizations derived its S from Middle Triassic evaporites. Using Sr isotopes of barite of known age combined with estimates on the Sr contents and Sr isotopic ratios of the fluids' source rocks, we were able to quantify mixing ratios of basement-derived fluids and sedimentary formation waters for the first time. These calculations show that Jurassic barite formed by mixing of 75–95% ascending basement-derived fluids with 5–25% sedimentary formation water, but that only 20–55% of the Sr was brought by the basement-derived fluid to the depositional site. Miocene barite formed by mixing of an ascending basement-derived brine (60–70%) with 30–40% sedimentary formation waters. In this case, only 8–15% of the Sr was derived from the deep brine. This fluid-mixing calculation is an example for deposits in which the fluid source is known. This method applied to a greater number of deposits formed at different times and in various geological settings may shed light on more general causes of fluid movement in the Earth's crust and on the formation of hydrothermal ore deposits.

Geologic map of the Wenatchee 1:100,000 Quadrangle, central Washington

USGS Publications Warehouse

Tabor, R.W.; Waitt, R.B.; Frizzell, V.A.; Swanson, D.A.; Byerly, G.R.; Bentley, R.D.

1982-01-01

The rocks and deposits within the Wenatchee quadrangle can be grouped into six generalized units: (1) Precambrian(?) Swakane Biotite Gneiss in the northeastern part of the quadrangle and the probable Jurassic low-grade metamorphic suite, mostly composed of the Easton Schist, in the southwestern part; (2) the Mesozoic Ingalls Tectonic Complex; (3) the Mesozoic Mount Stuart batholith; (4) lower and middle Tertiary nonmarine sedimentary and volcanic rocks; (5) Miocene basalt flows and interbedded epiclastic rocks constituting part of the Columbia River Basalt Group and interbedded silicic volcaniclastic rocks of the Ellensburg Formation; and (6) Pliocene to Holocene alluvium, glacial, flood, and mass-wastage deposits.

Metallogeny of the midcontinent rift system of North America

USGS Publications Warehouse

Nicholson, S.W.; Cannon, W.F.; Schulz, K.J.

1992-01-01

The 1.1 Ga Midcontinent rift system of North America is one of the world's major continental rifts and hosts a variety of mineral deposits. The rocks and mineral deposits of this 2000 km long rift are exposed only in the Lake Superior region. In the Lake Superior region, the rift cuts across Precambrian basement terranes ranging in age from ??? 1850 Ma to more than 3500 Ma. Where exposed, the rift consists of widespread tholeiitic basalt flows with local interlayered rhyolite and clastic sedimentary rocks. Beneath the center of Lake Superior the volcanic and sedimentary rocks are more than 30 km deep as shown by recent seismic reflection profiles. This region hosts two major classes of mineral deposits, magmatic and hydrothermal. All important mineral production in this region has come from hydrothermal deposits. Rift-related hydrothermal deposits include four main types: (1) native copper deposits in basalts and interflow sediments; (2) sediment-hosted copper sulfide and native copper; (3) copper sulfide veins and lodes hosted by rift-related volcanic and sedimentary rocks; and (4) polymetallic (five-element) veins in the surrounding Archean country rocks. The scarcity of sulfur within the rift rocks resulted in the formation of very large deposits of native metals. Where hydrothermal sulfides occur (i.e., shale-hosted copper sulfides), the source of sulfur was local sedimentary rocks. Magmatic deposits have locally supported exploration and minor production, but most are subeconomic presently. These deposits occur in intrusions exposed near the margins of the rift and include CuNiPGE and TiFe (V) in the Duluth Complex, U-REE-Nb in small carbonatites, and breccia pipes resulting from local hydrothermal activity around small felsic intrusions. Mineralization associated with some magmatic bodies resulted from the concentration of incompatible elements during fractional crystallization. Most of the sulfide deposits in intrusions, however, contain sulfur derived from country rocks; the interaction between magma and country rocks was important in generation of the magmatic CuNi sulfide deposits. A mantle plume origin has been proposed for the formation of the Midcontinent rift. More than 1 million km3 of mafic magma was erupted in the rift and a comparable volume of mafic intrusions are inferred beneath the rift, providing a ready and structurally confined supply of mafic source rocks that were available for leaching of metals by basinal brines. These brines were heated by a steep geothermal gradient that resulted from the melting and underplating of magma derived from the plume. Hydrothermal deposits were emplaced for at least 30-40 m.y. after rift magmatism and extension ceased. This time lag may reflect either the time required to heat deeply buried rocks and fluids within the rift, or may be due to the timing of post-rift compression that may have provided the driving mechanism for expulsion of hydrothermal fluids from deep portions of the rift. ?? 1992.

A method for development of a system of identification for Appalachian coal-bearing rocks

USGS Publications Warehouse

Ferm, J.C.; Weisenfluh, G.A.; Smith, G.C.

2002-01-01

The number of observable properties of sedimentary rocks is large and numerous classifications have been proposed for describing them. Some rock classifications, however, may be disadvantageous in situations such as logging rock core during coal exploration programs, where speed and simplicity are the essence. After experimenting with a number of formats for logging rock core in the Appalachian coal fields, a method of using color photographs accompanied by a rock name and numeric code was selected. In order to generate a representative collection of rocks to be photographed, sample methods were devised to produce a representative collection, and empirically based techniques were devised to identify repeatedly recognizable rock types. A number of cores representing the stratigraphic and geographic range of the region were sampled so that every megascopically recognizable variety was included in the collection; the frequency of samples of any variety reflects the frequency with which it would be encountered during logging. In order to generate repeatedly recognizable rock classes, the samples were sorted to display variation in grain size, mineral composition, color, and sedimentary structures. Class boundaries for each property were selected on the basis of existing, widely accepted limits and the precision with which these limits could be recognized. The process of sorting the core samples demonstrated relationships between rock properties and indicated that similar methods, applied to other groups of rocks, could yield more widely applicable field classifications. ?? 2002 Elsevier Science B.V. All rights reserved.

Active Microbial Methane Production and Organic Matter Degradation in a Devonian Black Shale

NASA Astrophysics Data System (ADS)

Martini, A. M.; Petsch, S. T.; Nuesslein, K.; McIntosh, J. C.

2003-12-01

Microorganisms employ many novel strategies to derive energy and obtain nutrients, and in doing so alter the chemistry of their environments in ways that are significant for formation and transformation of geologic materials. One such strategy is natural gas generation in sedimentary basins. Previous research has shown that stable isotopic signatures of CH4, CO2 and H2O in formation waters of gas-producing black shales indicate a microbial origin for several economically viable natural gas reserves. However, these signatures leave several intriguing issues unaddressed, including the identity of the organisms and their metabolic roles and impacts on mineral, isotopic and biomarker signatures. We hypothesize that the extreme reducing conditions required for sedimentary basin methanogenesis are simply the end product of a cascade of microbial processes, initiated by anaerobic respiration of shale organic matter through NO3, SO4 and/or Fe(III) reduction, secondary processing of anaerobe biomass by fermentative organisms yielding volatile fatty acids and H2, and ultimately CO2 reduction and/or acetate fermentation to produce CH4. This research holds importance for the several aspects of the geochemical carbon cycle. It describes anaerobic hydrocarbon degradation leading to methanogenesis in a sedimentary basin; in many instances this activity has generated economically viable reserves of natural gas. It also provides a benchmark detailing how post-depositional microbial activity in rocks may confound and overprint ancient biosignatures. Interpretation of past environmental conditions depends on molecular and isotopic signatures contained in ancient sedimentary rocks, separated from signatures of metabolically similar modern microbiota living in sedimentary basins. In addition, this research sheds light on an unrecognized and thus unconstrained source of reduced gases to Earth's atmosphere, important for understanding the rates and controls on carbon cycling through geologic time.

Depositional environment and sedimentary of the basinal sediments in the Eibiswalder Bucht (Radl Formation and Lower Eibiswald Beds), Miocene Western Styrian Basin, Austria

NASA Astrophysics Data System (ADS)

Stingl, K.

1994-12-01

The Eibiswald Bucht is a small subbasin of the Western Styrian Basin exposing sediments of Lower Miocene age. In the past the entire sequence exposed in the Eibiswalder Bucht has been interpreted as being of fluvial/lacustrine origin; here, results are presented of detailed sedimentological investigations that lead to a revision of this concept. The lowermost siliciclastic sedimentary unit of the Eibiswalder Bucht sequence is the Radl Formation. It is overlain by the Eibiswald Beds, which are subdivided into the Lower, Middle and Upper Eibiswald Beds. The Radl Formation and the Lower Eibiswald Beds are interpreted as a fan delta complex deposited along NNW-SSE striking faults. Based on the sedimentary facies this fan delta can be subdivided into a subaerial alluvial fan facies group, a proximal delta facies group and a distal delta/prodelta facies group. The Radl Formation comprises the alluvial fan and proximal delta facies groups, the Lower Eibiswald Beds the distal delta/prodelta facies group. The alluvial fan and the proximal delta consist of diverse deposits of gravelly flows. The distal delta/prodelta consists of wave-reworked, bioturbated, low density turbidites intercalated with minor gravelly mass flows. The prodelta can be regarded as as the basin facies of the small and shallow Eibiswalder Bucht, where marine conditions prevailed. The basin was probably in part connected with the Eastern Styrian Basin, the contemporary depositional environment of the Styrian Schlier (mainly turbiditic marine offshore sediments in the Eastern Styrian Basin). Analysis of the clast composition, in conjunction with the paleotransport direction of the coarse delta mass flows of the Radl Formation, shows that the source rocks were exclusively crystalline rocks ranging from greenschists to eclogites.

Geology and Ore Deposits of the Uncompahgre (Ouray) Mining District, Southwestern Colorado

USGS Publications Warehouse

Burbank, Wilbur Swett; Luedke, Robert G.

2008-01-01

The Uncompahgre mining district, part of the Ouray mining district, includes an area of about 15 square miles (mi2) on the northwestern flank of the San Juan Mountains in southwestern Colorado from which ores of gold, silver, copper, lead, and zinc have had a gross value of $14 to 15 million. Bedrock within the district ranges in age from Proterozoic to Cenozoic. The oldest or basement rocks, the Uncompahgre Formation of Proterozoic age, consist of metamorphic quartzite and slate and are exposed in a small erosional window in the southern part of the district. Overlying those rocks with a profound angular unconformity are Paleozoic marine sedimentary rocks consisting mostly of limestones and dolomites and some shale and sandstone that are assigned to the Elbert Formation and Ouray Limestone, both of Devonian age, and the Leadville Limestone of Mississippian age. These units are, in turn, overlain by rocks of marine transitional to continental origin that are assigned to the Molas and Hermosa Formations of Pennsylvanian age and the Cutler Formation of Permian age; these three formations are composed predominantly of conglomerates, sandstones, and shales that contain interbedded fossiliferous limestones within the lower two-thirds of the sequence. The overlying Mesozoic strata rest also on a pronounced angular unconformity upon the Paleozoic section. This thick Mesozoic section, of which much of the upper part was eroded before the region was covered by rocks of Tertiary age, consists of the Dolores Formation of Triassic age, the Entrada Sandstone, Wanakah Formation, and Morrison Formation all of Jurassic age, and the Dakota Sandstone and Mancos Shale of Cretaceous age. These strata dominantly consist of shales, mudstones, and sandstones and minor limestones, breccias, and conglomerates. In early Tertiary time the region was beveled by erosion and then covered by a thick deposit of volcanic rocks of mid-Tertiary age. These volcanic rocks, assigned to the San Juan Formation, are chiefly tuff breccias of intermediate composition, which were deposited as extensive volcaniclastic aprons around volcanic centers to the east and south of the area. The Ouray area, in general, exhibits the typical effects of a minimum of three major uplifts of the ancestral San Juan Mountains. The earliest of these uplifts, with accompanying deformation and erosion, occurred within the Proterozoic, and the other two occurred at the close, respectively, of the Paleozoic and Mesozoic. The last event, known as the Laramide orogeny, locally was accompanied by extensive intrusion of igneous rocks of dominantly intermediate composition. Domal uplifts of the ancestral mountains resulted in peripheral monoclinal folds, plunging anticlines radial to the central core of the mountain mass, faults, and minor folds. The principal ore deposits of the Uncompahgre district were associated with crosscutting and laccolithic intrusions of porphyritic granodiorite formed during the Laramide (Late Cretaceous to early Tertiary) orogeny. The ores were deposited chiefly in the Paleozoic and Mesozoic sedimentary strata having an aggregate thickness of about 4,500 feet (ft) and occur beneath the early Tertiary unconformity, which in places truncated some of the uppermost deposits. A few ore deposits of late Tertiary age occur also in the sedimentary rocks near the southern margin of the district, but are restricted mostly to the overlying volcanic rocks. Ore deposits in the Uncompahgre district range from low-grade, contact-metamorphic through pyritic base-metal bodies containing silver and gold tellurides and native gold to silver-bearing lead-zinc deposits, and are zoned about the center of intrusive activity, a stock in an area referred to as The Blowout. Ore deposition within the Uncompahgre district was largely controlled by structural trends and axes of uplift established mainly in the late Paleozoic phase of deformation, but also in part by structural lin

3D slicing of radiogenic heat production in Bahariya Formation, Tut oil field, North-Western Desert, Egypt.

PubMed

Al-Alfy, I M; Nabih, M A

2013-03-01

A 3D block of radiogenic heat production was constructed from the subsurface total gamma ray logs of Bahariya Formation, Western Desert, Egypt. The studied rocks possess a range of radiogenic heat production varying from 0.21 μWm(-3) to 2.2 μWm(-3). Sandstone rocks of Bahariya Formation have higher radiogenic heat production than the average for crustal sedimentary rocks. The high values of density log of Bahariya Formation indicate the presence of iron oxides which contribute the uranium radioactive ores that increase the radiogenic heat production of these rocks. The average radiogenic heat production produced from the study area is calculated as 6.3 kW. The histogram and cumulative frequency analyses illustrate that the range from 0.8 to 1.2 μWm(-3) is about 45.3% of radiogenic heat production values. The 3D slicing of the reservoir shows that the southeastern and northeastern parts of the study area have higher radiogenic heat production than other parts. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Tectonic implications of the Indian Run Formation; a newly recognized sedimentary melange in the northern Virginia Piedmont

USGS Publications Warehouse

Drake, Avery Ala

1985-01-01

Sedimentary melange in the northeastern part of Fairfax County, Virginia, contains both mesoscopic and mappable fragments of Accotink Schist, Lake Barcroft Metasandstone, metagabbro, and ultramafic rocks as well as smaller fragments of other rock types. This melange was originally mapped as the Sykesville Formation, a major precursory sedimentary melange in northern Virginia and Maryland. The fragments of Accotink Schist and Lake Barcroft Metasandstone within the Sykesville were considered to be rip-ups of these units over which the Sykesville slid when finally emplaced. More recent study has shown that fragments of Accotink and Lake Barcroft are restricted to a certain area of sedimentary melange originally defined as Sykesville, and this part of the melange is now considered to be a separate mappable unit, here named the Indian Run Formation. The Indian Run underlies the sequence Accotink Schist and Lake Barcroft Metasandstone which is here formally named the Annandale Group. The Indian Run is intruded by the Occoquan Granite of Cambrian age, so it is of Cambrian or Late Proterozoic age. The Sykesville Formation (restricted) is a much more extensive unit than the Indian Run Formation and is characterized by its contained olistoliths of the Peters Creek Schist, the unit that tectonically overlies it. The Sykesville and Peters Creek constitute a precursory melange-allochthon pair which is here termed a 'tectonic motif.' The Indian Run-Annandale pair then forms a tectonically lower motif, and the overlying pair, the Yorkshire Formation-Piney Branch Complex, forms a tectonically higher motif. The Chopawamsic Formation and underlying sedimentary melange in the area south of Fairfax County may form a tectonic motif beneath the Indian Run-Annandale tectonic motif. Thus, three and perhaps four repetitions of precursory melange-allochthon pairs occur in northern Virginia. Other percursory melanges and motifs may occur in the Maryland Piedmont to the north. The tectonic setting of the motif formation and assemblage is uncertain at this time. A model involving the obduction of several separate sheets onto the ancestral North American continental margin is appealing in that it involves the closing and destruction of a marginal basin, a relatively simple concept. This model fails, however, to supply a source for the sediment necessary to form the precursory melanges. A trench-slope origin would supply the vast amount of needed sediment by accretion. The precursory melangeallochthon motifs would then be stacked near the base of the trench slope. This model is appealing and requires a rather complicated assemblage of continental, arc, and oceanic fragments, such as those that occur on many modern continental margins.

Evidence for Acid-Sulfate Alteration in the Pahrump Hills Region, Gale Crater, Mars

NASA Technical Reports Server (NTRS)

Rampe, E. B.; Ming, D. W.; Blake, D. F.; Morris, R. V.; Bish, D. L.; Bristow, T. F.; Crisp, J. A.; Morookian, J. M.; Vaniman. D. T.; Chipera, S. J.;

Stress field sensitivity analysis within Mesozoic successions in the Swiss Alpine foreland using 3-D-geomechanical-numerical models

NASA Astrophysics Data System (ADS)

Reiter, Karsten; Hergert, Tobias; Heidbach, Oliver

2016-04-01

The in situ stress conditions are of key importance for the evaluation of radioactive waste repositories. In stage two of the Swiss site selection program, the three siting areas of high-level radioactive waste are located in the Alpine foreland in northern Switzerland. The sedimentary succession overlays the basement, consisting of variscan crystalline rocks as well as partly preserved Permo-Carboniferous deposits in graben structures. The Mesozoic sequence represents nearly the complete era and is covered by Cenozoic Molasse deposits as well as Quaternary sediments, mainly in the valleys. The target horizon (designated host rock) is an >100 m thick argillaceous Jurassic deposit (Opalinus Clay). To enlighten the impact of site-specific features on the state of stress within the sedimentary succession, 3-D-geomechanical-numerical models with elasto-plastic rock properties are set up for three potential siting areas. The lateral extent of the models ranges between 12 and 20 km, the vertical extent is up to a depth of 2.5 or 5 km below sea level. The sedimentary sequence plus the basement are separated into 10 to 14 rock mechanical units. The Mesozoic succession is intersected by regional fault zones; two or three of them are present in each model. The numerical problem is solved with the finite element method with a resolution of 100-150 m laterally and 10-30 m vertically. An initial stress state is established for all models taking into account the depth-dependent overconsolidation ratio in Opalinus Clay in northern Switzerland. The influence of topography, rock properties, friction on the faults as well as the impact of tectonic shortening on the state of stress is investigated. The tectonic stress is implemented with lateral displacement boundary conditions, calibrated on stress data that are compiled in Northern Switzerland. The model results indicate that the stress perturbation by the topography is significant to depths greater than the relief contrast. The impact of fault geometry and frictional properties is observed within a distance of <1 km. The major impact on the stress state is caused by the variability of the geomechanical stratigraphy. The stress anisotropy increases when tectonic shortening is applied to the models. Stress magnitudes and anisotropy are largest within the stiff formations such as limestone. These stiff formations carry the load due to far field tectonic forces, whereas weak formations, like the argillaceous target horizon for the waste disposal, exhibits smaller stress magnitudes. Using the fracture potential as a more unambiguous indicator, the stiff overburden rocks are closer to failure than the target horizon for the repository, whereas stiff formations below the target rocks are far from failure.

Basement geology of the National Petroleum Reserve Alaska (NPRA), Northern Alaska

USGS Publications Warehouse

Saltus, R.W.; Hudson, T.L.; Phillips, J.D.; Kulander, C.; Dumoulin, Julie A.; Potter, C.

2002-01-01

Gravity, aeromagnetic, seismic, and borehole information enable mapping of crustal basement characteristics within the National Petroleum Reserve Alaska (NPRA). In general, the pre-Mississippian basement of the southern portion of the NPRA is different from that in the north in that it is deeper and thinner, is made up of dense magnetic rocks, is cut by more normal faults, and underlies thicker accumulations of Mississippian to Triassic Ellesmerian sequence sedimentary rocks. Mafic igneous rocks within the basement and locally within the deeper Ellesmerian sequence sedimentary section could explain the observed density and magnetic variations. Because these variations spatially overlap thicker Ellesmerian sequence sediment accumulations, they may have developed, at least in part, during Mississippian to Triassic extension and basin formation. If this period of extension, and postulated mafic magmatism, was accompanied by higher heat flow, then early Ellesmerian sequence clastic sediments may have become mature for hydrocarbon generation (Magoon and Bird, 1988). This could have produced an early petroleum system in the Colville basin.

Sources of Matter and Ore-Producing Fluid of the Tamunyer Gold-Sulfide Deposit (Northern Urals): Isotope Results

NASA Astrophysics Data System (ADS)

Zamyatina, D. A.; Murzin, V. V.

2018-02-01

The Tamunyer deposit is a typical example of gold-sulfide mineralization located in the lower lithologic-stratigraphic unit (S2-D1) of the Auerbach volcanic-plutonic belt. The latter comprises island-arc andesitic volcano-sediments, volcanics, and comagmatic intrusive formations. Carbonates have demonstrated intermediate values of δ13C between marine limestone and mantle. The quartz δ18O is in the range of 15.3-17.2‰. The δ34S of sulfides from the beresitized volcano-sedimentary rocks and ores varies widely from -7.5 to 12‰. The calculated isotope compositions of H2O, CO2, and H2S of the ore-bearing fluid imply two major sources of matter contributing to ore genesis: local rocks and foreign fluid. The ore-bearing fluid was formed by interaction and isotope equilibration between a deep magmatic fluid and marine carbonates (W/R 1), with the contribution of sulfur from the volcano-sedimentary rocks.

A molecular and isotopic study of the organic matter from the Paris Basin, France

NASA Technical Reports Server (NTRS)

Lichtfouse, E.; Albrecht, P.; Behar, F.; Hayes, J. M.

1994-01-01

Thirteen Liassic sedimentary rocks of increasing depth and three petroleums from the Paris Basin were studied for 13C/12C isotopic compositions and biological markers, including steranes, sterenes, methylphenanthrenes, methylanthracenes, and triaromatic steroids. The isotopic compositions of n-alkanes from mature sedimentary rocks and petroleums fall in a narrow range (2%), except for the deepest Hettangian rock and the Trias petroleum, for which the short-chain n-alkanes are enriched and depleted in 13C, respectively. Most of the molecular parameters increase over the 2000-2500 m depth range, reflecting the transformation of the organic matter at the onset of petroleum generation. In this zone, carbonate content and carbon isotopic composition of carbonates, as well as molecular parameters, are distinct for the Toarcian and Hettangian source rocks and suggest a migration of organic matter from these two formations. Two novel molecular parameters were defined for this task: one using methyltriaromatic steroids from organic extracts; the other using 1-methylphenanthrene and 2-methylanthracene from kerogen pyrolysates. The anomalous high maturity of the Dogger petroleum relative to the maturity-depth trend of the source rocks is used to estimate the minimal vertical distance of migration of the organic matter from the source rock to the reservoir.

Geophysical Characterization and Structural Model of the Santa ROSALÍA Aquifer, Sonora, MÉXICO

NASA Astrophysics Data System (ADS)

Martínez-Retama, S.; Montaño-Del Cid, M. A.

2017-12-01

The main objective of this work was to determine the morphology and depth of the basement, as well as the elaboration of a structural model for the Santa Rosalía aquifer, from the processing and interpretation of gravimetric and aeromagnetic data and its correlation with the Geology of the area. The study area is located in the central portion of the State of Sonora, Mexico. In general, the geology of the site is characterized by sedimentary, igneous and metamorphic rocks whose ages vary from the Precambrian to Recent. Chronologically, the geology of the study area consists of igneous and metamorphic rocks of Precambrian age, considered as a metamorphic complex. The Paleozoic is represented by a sequence of prebatolytic rocks. This sequence is intruded by rocks of the Upper Cretaceous. The Triassic-Jurassic periods consist of arenaceous units of the Barranca Group. The Cretaceous is constituted by the Tarahumara Formation, as well as granite bodies. The Quaternary is composed of alluvial deposits, which are overlain by sediments of Recent. In this work a gravimetric survey was performed, registering a total of 7 profiles. In addition, measured data from the National Institute of Statistics and Geography (INEGI) were used. The aeromagnetic study was carried out with data from the Mexican Geological Service (SGM). In order to reduce the ambiguity in the modeling process, a rock sampling was taken from the study area and its density and magnetic susceptibility were measured. Finally, two-dimensional models of gravimetric and magnetic profiles were made to obtain the structural model of the study area. The geological-structural models obtained show gravimetric anomalies (low)associated with sedimentary basins with depths of 800 m to 1,500 m., indicating the most susceptible áreas to water storage. The basement is represented by volcanic and granite rocks that are in contact with Paleozoic sedimentary rocks (Limestone) and in some areas with volcanic rocks of the Tarahumara Formation. In these models two types of sliding tectonic events were interpreted. In the first one a system of low-angle normal faulting related to the distensive event Basin and Range was interpreted. In the second, a series of high- angle normal faults, which form Horst and Grabens structures related to the opening of the Gulf of California were modeled.

Limiting the Magnitude of Potential Injection-Induced Seismicity Associated With Waste-Water Disposal, Hydraulic Fracturing and CO2 Sequestration

NASA Astrophysics Data System (ADS)

Zoback, Mark

2017-04-01

In this talk, I will address the likelihood for fault slip to occur in response to fluid injection and the likely magnitude of potentially induced earthquakes. First, I will review a methodology that applies Quantitative Risk Assessment to calculate the probability of a fault exceeding Mohr-Coulomb slip criteria. The methodology utilizes information about the local state of stress, fault strike and dip and the estimated pore pressure perturbation to predict the probability of the fault slip as a function of time. Uncertainties in the input parameters are utilized to assess the probability of slip on known faults due to the predictable pore pressure perturbations. Application to known faults in Oklahoma has been presented by Walsh and Zoback (Geology, 2016). This has been updated with application to the previously unknown faults associated with M >5 earthquakes in the state. Second, I will discuss two geologic factors that limit the magnitudes of earthquakes (either natural or induced) in sedimentary sequences. Fundamentally, the layered nature of sedimentary rocks means that seismogenic fault slip will be limited by i) the velocity strengthening frictional properties of clay- and carbonate-rich rock sequences (Kohli and Zoback, JGR, 2013; in prep) and ii) viscoplastic stress relaxation in rocks with similar composition (Sone and Zoback, Geophysics, 2013a, b; IJRM, 2014; Rassouli and Zoback, in prep). In the former case, if fault slip is triggered in these types of rocks, it would likely be aseismic due the velocity strengthening behavior of faults. In the latter case, the stress relaxation could result in rupture termination in viscoplastic formations. In both cases, the stratified nature of sedimentary rock sequences could limit the magnitude of potentially induced earthquakes. Moreover, even when injection into sedimentary rocks initiates fault slip, earthquakes large enough to cause damage will usually require slip on faults sufficiently large that they extend into basement. This suggests that an important criterion for large-scale CO2 sequestration projects is that the injection zone is isolated from crystalline basement rocks by viscoplastic shales to prevent rupture propagation from extending down into basement.

Petrography and the REE-composition of apatite in the Paleoproterozoic Pilgujärvi Sedimentary Formation, Pechenga Greenstone Belt, Russia

NASA Astrophysics Data System (ADS)

Joosu, Lauri; Lepland, Aivo; Kreitsmann, Timmu; Üpraus, Kärt; Roberts, Nick M. W.; Paiste, Päärn; Martin, Adam P.; Kirsimäe, Kalle

2016-08-01

The first globally significant phosphorous-rich deposits appear in the Paleoproterozoic at around 2 Ga, however, the specific triggers leading to apatite precipitation are debated. We examine phosphorous-rich rocks (up to 8 wt% P2O5) in 1.98-1.92 Ga old Pilgujärvi Sedimentary Formation, Pechenga Greenstone Belt, Russia. Phosphates in these rocks occur as locally derived and resedimented sand-to-gravel/pebble sized grains consisting of apatite-cemented muddy sediments. Phosphatic grains can be subdivided into four petrographic types (A-D), each has a distinct REE signature reflecting different early-to-late diagenetic conditions and/or metamorphic overprint. Pyrite containing petrographic type D, which typically has a flat REE pattern, negative Ce anomaly and positive Eu anomaly, is the best preserved of the four types and best records conditions present during apatite precipitation. Type D phosphatic grains precipitated under (sub)oxic basinal conditions with a significant hydrothermal influence. These characteristics are similar to Zaonega Formation phosphates of NW Russia's Onega Basin, and consistent with phosphogenesis triggered by the development of anoxic(sulfidic)-(sub)oxic redoxclines at shallow sediment depth during the Paleoproterozoic.

Structural context and variation of ocean plate stratigraphy, Franciscan Complex, California: insight into mélange origins and subduction-accretion processes

NASA Astrophysics Data System (ADS)

Wakabayashi, John

2017-12-01

The transfer (accretion) of materials from a subducting oceanic plate to a subduction-accretionary complex has produced rock assemblages recording the history of the subducted oceanic plate from formation to arrival at the trench. These rock assemblages, comprising oceanic igneous rocks progressively overlain by pelagic sedimentary rocks (chert and/or limestone) and trench-fill clastic sedimentary rocks (mostly sandstone, shale/mudstone), have been called ocean plate stratigraphy (OPS). During accretion of OPS, megathrust slip is accommodated by imbricate faults and penetrative strain, shortening the unit and leading to tectonic repetition of the OPS sequence, whereas OPS accreted at different times are separated by non-accretionary megathrust horizons. The Franciscan subduction complex of California accreted episodically over a period of over 150 million years and incorporated OPS units with a variety of characteristics separated by non-accretionary megathrust horizons. Most Franciscan OPS comprises MORB (mid-ocean-ridge basalt) progressively overlain by chert and trench-fill clastic sedimentary rocks that are composed of variable proportions of turbidites and siliciclastic and serpentinite-matrix olistostromes (sedimentary mélanges). Volumetrically, the trench-fill component predominates in most Franciscan OPS, but some units have a significant component of igneous and pelagic rocks. Ocean island basalt (OIB) overlain by limestone is less common than MORB-chert assemblages, as are abyssal serpentinized peridotite slabs. The earliest accreted OPS comprises metabasite of supra-subduction zone affinity imbricated with smaller amounts of metaultramafic rocks and metachert, but lacking a clastic component. Most deformation of Franciscan OPS is localized along discrete faults rather than being distributed in the form of penetrative strain. This deformation locally results in block-in-matrix tectonic mélanges, in contrast to the sedimentary mélanges making up part of the clastic OPS component. Such tectonic mélanges may include blocks and matrix derived from the olistostromes. Franciscan subduction and OPS accretion initiated in island arc crust at about 165-170 Ma, after which MORB and OIB were subducted and accreted following a long (tens of mega-ampere) gap with little or no accretion. Following subduction initiation, a ridge crest approached the trench but probably went dormant prior to its subduction (120-125 Ma), after which the subducted oceanic crust became progressively older until about 95 Ma. From 95 Ma, the age of subducted oceanic crust decreased progressively until arrival of the Pacific-Farallon spreading center led to termination of subduction and conversion to a transform plate boundary.

Pangea break-up: from passive to active margin in the Colombian Caribbean Realm

NASA Astrophysics Data System (ADS)

Gómez, Cristhian; Kammer, Andreas

2017-04-01

The break-up of Western Pangea has lead to a back-arc type tectonic setting along the periphery of Gondwana, with the generation of syn-rift basins filled with sedimentary and volcanic sequences during the Middle to Late Triassic. The Indios and Corual formations in the Santa Marta massif of Northern Andes were deposited in this setting. In this contribution we elaborate a stratigraphic model for both the Indios and Corual formations, based on the description and classification of sedimentary facies and their architecture and a provenance analysis. Furthermore, geotectonic environments for volcanic and volcanoclastic rock of both units are postulated. The Indios Formation is a shallow-marine syn-rift basin fill and contains gravity flows deposits. This unit is divided into three segments; the lower and upper segments are related to fan-deltas, while the middle segment is associated to offshore deposits with lobe incursions of submarine fans. Volcanoclastic and volcanic rocks of the Indios and Corual formations are bimodal in composition and are associated to alkaline basalts. Volcanogenic deposits comprise debris, pyroclastic and lava flows of both effusive and explosive eruptions. These units record multiple phases of rifting and reveal together a first stage in the break-up of Pangea during Middle and Late Triassic in North Colombia.

Leaching of boron, arsenic and selenium from sedimentary rocks: I. Effects of contact time, mixing speed and liquid-to-solid ratio.

PubMed

Tabelin, Carlito Baltazar; Hashimoto, Ayaka; Igarashi, Toshifumi; Yoneda, Tetsuro

2014-02-15

Sedimentary rocks of marine origin excavated in tunnel projects were recently identified as potentially hazardous because they could release significant amounts of toxic trace elements when exposed to the environment. This study investigated the leaching characteristics of B, As, Se and the major coexisting ions under various conditions to identify the factors and processes controlling their evolution in the leachate. In addition, we evaluated whether the parameters of the currently used leachability test for excavated rocks were adequate. Although the leachabilities of B, As and Se similarly increased at longer contact times, only those of B and As were influenced by the mixing speed and/or liquid-to-solid ratio (L/S). The majority of trace elements dissolved in the leachate originated from the dissolution of soluble salts formed from seawater of the Cretaceous trapped during the formation of the sedimentary rocks. Moreover, the alkaline pH of the leachates could be attributed to the simultaneous dissolutions at varying degrees of the mineral components of the rocks as well as the precipitation of clay minerals. In the leaching test of excavated rocks for regulatory purposes, the best values of contact time and mixing speed should represent conditions of the highest trace element extractabilities, which in this study were found at longer contact times (>48 h) and the fastest mixing speed (200 rpm). The most appropriate L/S for the leaching test is 10 because it was around this L/S that the extractabilities and leaching concentrations of the trace elements were simultaneously observed at their highest values. Copyright © 2013 Elsevier B.V. All rights reserved.

A reconnaissance for uranium in carbonaceous rocks in southwestern Colorado and parts of New Mexico

USGS Publications Warehouse

Baltz, Elmer H.

1955-01-01

Coal and carbonaceous shale of the Dakota formation of Cretaceous age were examined for radioactivity in the Colorado Plateau of southwestern Colorado and northwestern New l1exico during the summer of 1953. Older and younger sedimentary rocks and some igneous rocks also were examined, but in less detail, Weak radioactivity was detected at many places but no new deposits of apparent economic importance were discovered. The highest radioactivity of carbonaceous rocks was detected in black shale, siltstone, and sandstone of the Paradox member of the Hermosa formation of Pennsylvanian age. A sample collected from this member at the Bald Eagle prospect in Gypsum Valley, San Higuel County, Colo. contains 0.10. percent uranium. Carbonaceous rocks were investigated at several localities on the Las Vegas Plateau and the Canadian Escarpment in Harding and San Miguel Counties, northeastern New Mexico. Carbonaceous sandstone and siltstone in the middle sandstone member of the Chinle formation of Triassic age contain uranium at a prospect of the Hunt Oil Company southwest of Sabinoso in northeastern San Miguel County, N. Mex. A channel sample across 3.2 feet of mineralized rocks at this locality contains 0.22 percent uranium. Weak radioactivity was detected at two localities in carbonaceous shale of the Dakota and Purgatoire formations of Cretaceous age.

delta 15N and non-carbonate delta 13C values for two petroleum source rock reference materials and a marine sediment reference material

USGS Publications Warehouse

Dennen, Kristin O.; Johnson, Craig A.; Otter, Marshall L.; Silva, Steven R.; Wandless, Gregory A.

2006-01-01

Samples of United States Geological Survey (USGS) Certified Reference Materials USGS Devonian Ohio Shale (SDO-1), and USGS Eocene Green River Shale (SGR-1), and National Research Council Canada (NRCC) Certified Marine Sediment Reference Material (PACS-2), were sent for analysis to four separate analytical laboratories as blind controls for organic rich sedimentary rock samples being analyzed from the Red Dog mine area in Alaska. The samples were analyzed for stable isotopes of carbon (delta13Cncc) and nitrogen (delta15N), percent non-carbonate carbon (Wt % Cncc) and percent nitrogen (Wt % N). SDO-1, collected from the Huron Member of the Ohio Shale, near Morehead, Kentucky, and SGR-1, collected from the Mahogany zone of the Green River Formation are petroleum source rocks used as reference materials for chemical analyses of sedimentary rocks. PACS-2 is modern marine sediment collected from the Esquimalt, British Columbia harbor. The results presented in this study are, with the exceptions noted below, the first published for these reference materials. There are published information values for the elemental concentrations of 'organic' carbon (Wt % Corg measured range is 8.98 - 10.4) and nitrogen (Wt % Ntot 0.347 with SD 0.043) only for SDO-1. The suggested values presented here should be considered 'information values' as defined by the NRCC Institute for National Measurement Reference Materials and should be useful for the analysis of 13C, 15N, C and N in organic material in sedimentary rocks.

Geoengineering Research for a Deep Underground Science and Engineering Laboratory in Sedimentary Rock

NASA Astrophysics Data System (ADS)

Mauldon, M.

2004-12-01

A process to identify world-class research for a Deep Underground Science and Engineering Laboratory (DUSEL) in the USA has been initiated by NSF. While allowing physicists to study, inter alia, dark matter and dark energy, this laboratory will create unprecedented opportunities for biologists to study deep life, geoscientists to study crustal processes and geoengineers to study the behavior of rock, fluids and underground cavities at depth, on time scales of decades. A substantial portion of the nation's future infrastructure is likely to be sited underground because of energy costs, urban crowding and vulnerability of critical surface facilities. Economic and safe development of subsurface space will require an improved ability to engineer the geologic environment. Because of the prevalence of sedimentary rock in the upper continental crust, much of this subterranean infrastructure will be hosted in sedimentary rock. Sedimentary rocks are fundamentally anisotropic due to lithology and bedding, and to discontinuities ranging from microcracks to faults. Fractures, faults and bedding planes create structural defects and hydraulic pathways over a wide range of scales. Through experimentation, observation and monitoring in a sedimentary rock DUSEL, in conjunction with high performance computational models and visualization tools, we will explore the mechanical and hydraulic characteristics of layered rock. DUSEL will permit long-term experiments on 100 m blocks of rock in situ, accessed via peripheral tunnels. Rock volumes will be loaded to failure and monitored for post-peak behavior. The response of large rock bodies to stress relief-driven, time-dependent strain will be monitored over decades. Large block experiments will be aimed at measurement of fluid flow and particle/colloid transport, in situ mining (incl. mining with microbes), remediation technologies, fracture enhancement for resource extraction and large scale long-term rock mass response to induced stresses - with parallel geophysical imaging of the rock mass (and subsequent verification) flow and transport processes, and time-dependent stress and strain. An experimental advantage of sedimentary rock is the presence of pervasive mechanical interfaces (bedding planes), which suggest a host of experimental designs on large rock blocks and slabs (induced flexure, shear strength of interfaces, etc). Thus DUSEL will enable fundamental research about the behavior of a layered rock mass - the dominant structural architecture in near-surface environments worldwide. A further benefit is the natural suitability of sedimentary rocks for experiments related to oil and gas production, or to CO2 sequestration. For example, fluid-induced fracturing of sedimentary rock has long been used by the hydrocarbon industry to improve oil and coal bed methane recovery. Since some fracturing agents are potential contaminants, a major concern and legal responsibility in the US is ensuring the integrity of nearby aquifers. Hydraulic fracturing from a sedimentary rock DUSEL will be followed by injection of low viscosity grout. The rock mass will then be mined back to expose network characteristics of the induced hydraulic fractures. Key questions related to hydrocarbon extraction, CO2 sequestration, waste isolation, and remediation of subsurface contaminants depend critically on the connectivity and architecture of fractures and on coupled thermal, hydrological, mechanical and chemical processes. Fluid flow, particle transport and reaction transport processes are coupled to the stress across fractures, and to thermal, chemical and hydraulic gradients. All can best be studied via large block tests in a subterranean laboratory, ideally in a sedimentary environment.

Layers and Fractures in Ophir Chasma

NASA Image and Video Library

2015-11-05

Ophir Chasma forms the northern portion of Valles Marineris, and this image from NASA Mars Reconnaissance Orbiter spacecraft features a small part of its wall and floor. The wall rock shows many sedimentary layers and the floor is covered with wind-blown ridges, which are intermediate in size between sand ripples and sand dunes. Rocks protruding on the floor could be volcanic intrusions of once-molten magma that have pushed aside the surrounding sedimentary layers and "froze" in place. Images like this can help geologists study the formation mechanisms of large tectonic systems like Valles Marineris. (The word "tectonics" does not mean the same thing as "plate tectonics." Tectonics simply refers to large stresses and strains in a planet's crust. Plate tectonics is the main type of tectonics that Earth has; Mars does not have plate tectonics.) http://photojournal.jpl.nasa.gov/catalog/PIA20044

The Widespread Distribution of Komatiitic Tuffs in the 3.3 Ga Weltevreden Formation, Barberton Greenstone Belt, South Africa

NASA Astrophysics Data System (ADS)

Thompson, M. E.; Lowe, D. R.; Byerly, G. R.

2007-12-01

The 3.5-3.2 Ga Barberton greenstone belt is a heavily deformed, 10-15 km thick succession of volcanic and sedimentary rocks representing one of the best preserved Paleoarchean supracrustal sequences known. It consists of the basal volcanic-dominated Onverwacht Group and the overlying sedimentary-dominated Fig Tree and Moodies Groups. Major volcanic rocks in the BGB include komatiites, tholeiitic basalts, and dacites. Although flow rocks and fragmental deposits have been identified representing all extrusive magma types, the abundance of komatiitic volcaniclastic units is remarkable considering the mechanical difficulties in explosively erupting low viscosity ultramafic lava. In the Onverwacht Group, most komatiitic tuffs contain 85-95 wt% SiO2, due to early silicification, and very low concentrations of most other elements, making original compositions somewhat uncertain. However, in the northernmost part of the BGB, north of the Inyoka Fault, the ~ 3.3 Ga Weltevreden Formation is composed largely of komatiitic flow rocks, tuffs, layered ultramafic complexes, and subordinate black and banded cherts. Previous studies have established the extrusive nature of the komatiites, but there are also many thick interlayered slaty units, previously interpreted as sheared flow rocks, which show cross-bedding, soft-sediment deformation, and other features indicating an alternate derivation. These units range from 2 to 80 m thick and may represent 10% or more of the overall stratigraphy of the Weltevreden Formation. They are characterized by low-temperature serpentinization that has commonly preserved original elemental abundances, enabling a more precise determination of primary komatiitic liquid composition. These rocks are magnesium rich, with MgO ranging from 23 to 36 wt%, and high Ni (~1500 ppm) and Cr (~2600 ppm) contents typical of komatiites. Several possible mechanisms could have produced these rocks, including (1) erosion and transport of pre-existing komatiitic flow rock, (2) volcanic base surges, (3) current reworking of fall-deposited pyroclastic material, and (4) remobilization of hyaloclastitic debris. The abundance of fine-grained sediments and of flat- and cross-laminated beds, the paucity of cr-spinels, and komatiitic immobile element ratios suggest that most of these high-Mg beds formed by minor reworking of komatiitic pyroclastic ash in a subaqueous environment.

Effect of hydro mechanical coupling on natural fracture network formation in sedimentary basins

NASA Astrophysics Data System (ADS)

Ouraga, Zady; Guy, Nicolas; Pouya, Amade

2018-05-01

In sedimentary basin context, numerous phenomena, depending on the geological time span, can result in natural fracture network formation. In this paper, fracture network and dynamic fracture spacing triggered by significant sedimentation rate are studied considering mode I fracture propagation using a coupled hydro-mechanical numerical methods. The focus is put on synthetic geological structure under a constant sedimentation rate on its top. This model contains vertical fracture network initially closed and homogeneously distributed. The fractures are modelled with cohesive zone model undergoing damage and the flow is described by Poiseuille's law. The effect of the behaviour of the rock is studied and the analysis leads to a pattern of fracture network and fracture spacing in the geological layer.

Geologic map of the Boulder-Fort Collins-Greeley Area, Colorado

USGS Publications Warehouse

Colton, Roger B.

1978-01-01

This digital map shows the geographic extent of rock stratigraphic units (formations) as compiled by Colton in 1976 under the Front Range Urban Corridor Geology Program. Colton used his own geologic mapping and previously published geologic maps to compile one map having a single classification of geologic units. The resulting published color paper map (USGS Map I-855-G, Colton, 1978) was intended for land-use planning and to depict the regional geology. In 1997-1999, another USGS project designed to address urban growth issues was undertaken. This project, the USGS Front Range Infrastructure Resources Project, undertook to digitize Colton's map at 1:100,000 scale, making it useable in Geographical Information Systems (GIS). That product is described here. In general, the digitized map depicts in its western part Precambrian igneous and metamorphic rocks, Pennsylvanian and younger sedimentary rock units, major faults, and brecciated zones along an eastern strip (5-20 km wide) of the Front Range. The central and eastern parts of the map (Colorado Piedmont) show a mantle of Quaternary unconsolidated deposits and interspersed outcrops of sedimentary rock of Cretaceous or Tertiary age. A surficial mantle of unconsolidated deposits of Quaternary age is differentiated and depicted as eolium (wind-blown sand and silt), alluvium (river gravel, sand, and silt of variable composition), colluvium, and a few landslide deposits. At the mountain front, north-trending, Paleozoic and Mesozoic formations of sandstone, shale, and minor limestone dip mostly eastward and form folds, fault blocks, hogbacks and intervening valleys. Local dikes and sills of Tertiary rhyodacite and basalt intrude rocks near the range front, mostly in the Boulder area.

Excess europium content in Precambrian sedimentary rocks and continental evolution

NASA Technical Reports Server (NTRS)

Jakes, P.; Taylor, S. R.

1974-01-01

It is proposed that the europium excess in Precambrian sedimentary rocks, relative to those of younger age, is derived from volcanic rocks of ancient island arcs, which were the source materials for the sediments. Precambrian sedimentary rocks and present-day volcanic rocks of island arcs have similar REE patterns, total REE abundances, and excess Eu, relative to the North American shale composite. The present upper crustal REE pattern, as exemplified by that of sediments, is depleted in Eu, relative to chondrites. This depletion is considered to be a consequence of development of a granodioritic upper crust by partial melting in the lower crust, which selectively retains europium.

Elemental geochemistry of sedimentary rocks at Yellowknife Bay, Gale crater, Mars.

PubMed

McLennan, S M; Anderson, R B; Bell, J F; Bridges, J C; Calef, F; Campbell, J L; Clark, B C; Clegg, S; Conrad, P; Cousin, A; Des Marais, D J; Dromart, G; Dyar, M D; Edgar, L A; Ehlmann, B L; Fabre, C; Forni, O; Gasnault, O; Gellert, R; Gordon, S; Grant, J A; Grotzinger, J P; Gupta, S; Herkenhoff, K E; Hurowitz, J A; King, P L; Le Mouélic, S; Leshin, L A; Léveillé, R; Lewis, K W; Mangold, N; Maurice, S; Ming, D W; Morris, R V; Nachon, M; Newsom, H E; Ollila, A M; Perrett, G M; Rice, M S; Schmidt, M E; Schwenzer, S P; Stack, K; Stolper, E M; Sumner, D Y; Treiman, A H; VanBommel, S; Vaniman, D T; Vasavada, A; Wiens, R C; Yingst, R A

2014-01-24

Sedimentary rocks examined by the Curiosity rover at Yellowknife Bay, Mars, were derived from sources that evolved from an approximately average martian crustal composition to one influenced by alkaline basalts. No evidence of chemical weathering is preserved, indicating arid, possibly cold, paleoclimates and rapid erosion and deposition. The absence of predicted geochemical variations indicates that magnetite and phyllosilicates formed by diagenesis under low-temperature, circumneutral pH, rock-dominated aqueous conditions. Analyses of diagenetic features (including concretions, raised ridges, and fractures) at high spatial resolution indicate that they are composed of iron- and halogen-rich components, magnesium-iron-chlorine-rich components, and hydrated calcium sulfates, respectively. Composition of a cross-cutting dike-like feature is consistent with sedimentary intrusion. The geochemistry of these sedimentary rocks provides further evidence for diverse depositional and diagenetic sedimentary environments during the early history of Mars.

Petroleum geology and resources of the Nepa-Botuoba High, Angara-Lena Terrace, and Cis-Patom Foredeep, southeastern Siberian Craton, Russia

USGS Publications Warehouse

Ulmishek, Gregory F.

2001-01-01

Three structural provinces of this report, the Nepa-Botuoba High, the Angara-Lena Terrace, and the Cis-Patom Foredeep, occupy the southeastern part of the Siberian craton northwest of the Baikal-Patom folded region (fig. 1). The provinces are similar in many aspects of their history of development, stratigraphic composition, and petroleum geology characteristics. The sedimentary cover of the provinces overlies the Archean?Lower Proterozoic basement of the Siberian craton. Over most of the area of the provinces, the basement is covered by Vendian (uppermost Proterozoic, 650?570 Ma) clastic and carbonate rocks. Unlike the case in the more northwestern areas of the craton, older Riphean sedimentary rocks here are largely absent and they appear in the stratigraphic sequence only in parts of the Cis-Patom Foredeep province. Most of the overlying sedimentary section consists of Cambrian and Ordovician carbonate and clastic rocks, and it includes a thick Lower Cambrian salt-bearing formation. Younger rocks are thin and are present only in marginal areas. 1 A single total petroleum system (TPS) embraces all three provinces. The TPS is unique in two aspects: (1) its rich hydro-carbon reserves are derived from Precambrian source rocks and (2) preservation of oil and gas fields is extremely long owing to the presence of the Lower Cambrian undeformed salt seal. Discovered reserves of the TPS are about 2 billion barrels of oil and more than 30 trillion cubic feet of gas. The stratigraphic distribution of oil and gas reserves is narrow; all fields are in Vendian to lowermost Cambrian clastic and carbonate reservoirs that occur below Lower Cambrian salt. Both structural and stratigraphic traps are known. Source rocks are absent in the sedimentary cover of the provinces, with the possible exception of a narrow zone on the margin of the Cis-Patom Foredeep province. Source rocks are interpreted here to be Riphean and Vendian organic-rich shales of the Baikal-Patom folded region. These rocks presently are deformed and metamorphosed, but they generated oil and gas before the deformation occurred in Late Silurian and Devonian time. Generated hydrocarbons migrated updip onto the craton margin. The time of migration and formation of fields is constrained by the deposition of Lower Cambrian salt and by the Late Silurian or Devonian metamorphism of source rocks. This time frame indicates that the TPS is one of the oldest petroleum systems in the world. All three provinces are exploration frontiers, and available geologic data are limited; therefore, only one assessment unit has been identified. The largest undiscovered hydrocarbon resources are expected to be in Vendian clastic reservoirs in both structural and stratigraphic traps of the Nepa-Botuoba High province. The petroleum potential of Vendian?lowermost Cambrian carbonate reservoirs is smaller. Nevertheless, these reservoirs may contain significant resources. Gas is expected to dominate over oil in the resource base.

Provenance and tectonic setting of the Neoproterozoic clastic rocks hosting the Banana Zone Cu-Ag mineralisation, northwest Botswana

NASA Astrophysics Data System (ADS)

Kelepile, Tebogo; Bineli Betsi, Thierry; Franchi, Fulvio; Shemang, Elisha; Suh, Cheo Emmanuel

2017-05-01

Petrographic and geochemical data were combined in order to decipher the petrogenesis of the Neoproterozoic sedimentary succession associated with the Banana Zone Cu-Ag mineralisation (northwest Botswana), in the Kalahari Copperbelt. The investigated Neoproterozoic sedimentary succession is composed of two formations including the Ngwako Pan and the D'kar Formations. The Ngwako Pan Formation is made up of continental siliciclastic sediments, mainly sandstones interbedded with siltstones and mudstones, whereas the D'kar Formation is comprised of shallow marine laminated siltstones, sandstones and mudstones, with subordinate limestone. Copper-Ag mineralisation is essentially confined at the base of the D'kar Formation, which bears reduced organic components, likely to have controlled Cu-Ag precipitation. Sandstones of both the Ngwako Pan and the D'kar Formations are arkoses and subarkoses, composed of quartz (Q), feldspars (F) and lithic fragments (L). Moreover, geochemically the sandstones are considered as potassic and classified as arkoses. On the other hand, mudrocks of the D'kar Formation are finely laminated and are dominated by muscovite, sericite, chlorite and quartz. The modified chemical index of weathering (CIW‧) values indicated an intense chemical weathering of the source rock. The dominance of detrital quartz and feldspar grains coupled with Al2O3/TiO2 ratios (average 29.67 and 24.52 for Ngwako Pan and D'kar Formations, respectively) and Ni and Cr depletion in the sandstones, suggest a dominant felsic source. However, high concentrations of Ni and Cr and a low Al2O3/TiO2 ratio (<20) in the mudrocks of the D'kar Formation indicate a mixed source. Provenance of the investigated sandstones and mudrocks samples is further supported by the REE patterns, the size of Eu anomaly as well as La/Co, Th/Co, Th/Cr and Cr/Th ratios, which show a felsic source for the sandstones of both the Ngwako Pan and D'kar Formations and an intermediate source for the mudrocks of the D'kar Formation. Detrital modes (QFL diagrams) and geochemical characteristics of the sandstones of both the Ngwako Pan and D'kar Formations indicate that the detritus were probably supplied from a heavily weathered felsic continental block and deposited in a continental rift setting (passive margin) in a humid environment. The source rocks might have been the Palaeoproterozoic basement rocks (granitoids and granitic gneiss) and the Mesoproterozoic Kgwebe volcanic rocks exposed north of the study area.

Possibility of heliotropical response from inclination of columnar stromatolites, Socheong island, Korea

NASA Astrophysics Data System (ADS)

KONG, Dal Yong; LEE, Seong Joo; Golubic, Stjepko

2014-05-01

Socheong island is a unique island containing Precambrian stromatolites in South Korea. Most of Socheong stromatolites are domes and columns, occurring as 10 cm to 1 meter thick stromatolite beds. Lower parts of stromatolite beds are predominantly composed of domal stromatolites, while columns increase toward the upper level of stromatolite beds. In many of stromatolite beds, inclined columns are easily identifiable, which is generally considered as a result of heliotropism. From general lithology, sedimentary structures, inclined angles and distributional pattern, and structural deformation of sedimentary rocks of Socheong island, the inclination of Socheong stromatolites could be better interpreted as a secondary structural deformation probably after formation of stromatolite columns, rather than as a result of heliotropism. However, at this moment, we do not clearly reject heliotropism interpretation for inclined columns of Socheong stromatolites. This is because the original position of stromatolite columns were also lost if structural deformation would have affected throughout the whole sedimentary rocks of Socheong island. [Acknowledgments] This research was financially supported by the National Research Institute of Cultural Heritage.

Aquifers of the Denver Basin, Colorado

USGS Publications Warehouse

Topper, R.

2004-01-01

Development of the Denver Basin for water supply has been ongoing since the late 1800s. The Denver Basin aquifer system consists of the water-yielding strata of Tertiary and Cretaceous sedimentary rocks within four overlying formations. The four statutory aquifers contained in these formations are named the Dawson, Denver, Arapahoe, and Laramie-Fox Hills. For water rights administrative purposes, the outcrop/subcrop of the Laramie-Fox Hills aquifer defines the margins of the Basin. Initial estimates of the total recoverable groundwater reserves in storage, under this 6700-mi2 area, were 295 million acre-ft. Recent geologic evidence indicates that the aquifers are very heterogeneous and their composition varies significantly with distance from the source area of the sediments. As a result, available recoverable reserves may be one-third less than previously estimated. There is no legal protection for pressure levels in the aquifer, and water managers are becoming increasingly concerned about the rapid water level declines (30 ft/yr). Approximately 33,700 wells of record have been completed in the sedimentary rock aquifers of the Denver Basin for municipal, industrial, agricultural, and domestic uses.

Discrimination of hydrothermally altered rocks along the Battle Mountain-Eureka, Nevada mineral belt using LANDSAT images

NASA Technical Reports Server (NTRS)

Krohn, M. D.; Abrams, M. J.; Rowan, L. C. (Principal Investigator)

1979-01-01

The author has identified the following significant results. Limonitic alteration halos associated with two copper prophyry deposits were successfully mapped at Battle Mountain. Alteration halos from both a hypogene system at Copper Canyon and a supergene system at Copper Basin are recognizable in the composite. Both copper porphyry deposits are located in sedimentary rock units that commonly have ferruginous coatings; yet, in most cases, the hydrothermally derived limonite was distinguishable in the CRC from sedimentary limonite. Large format playback images with pixel sizes from 200 to 400 micron m provided details of spatial resolution and color separation unachievable on enlargements from 70 mm film chips. Details of the alteration halos could be resolved only in the large format images. Two aspects of the alteration halos of the porphyry copper deposits were not mapped on the CRC. The optimum CRC image for the area studied consists of MSS 4/5 as blue, MSS 4/6 as yellow, and MSS 6/7 as magenta using diazo films. The disseminated gold deposits at Gold Acres are not depicted in the CRC image.

Preliminary location and age database for invertebrate fossils collected in the San Francisco Bay region, California

USGS Publications Warehouse

Parker, John M.; West, William B.; Malmborg, William T.; Brabb, Earl E.

2003-01-01

Most geologic maps published for central California in the past century have been made without the benefit of microfossils. The age of Cretaceous and Tertiary rocks in the structurally complex sedimentary formations of the Coast Ranges is critical in determining stratigraphic succession and in determining whether the juxtapositon of similar appearing formations means that a fault is present. Since the 1930’s, at least, oil company geologists have used microfossils to assist them in geologic mapping and in determining the environments of deposition of sedimentary rocks. This information has been confidential, but in the past 20 years the attitude of petroleum companies about this information has changed, and much material is now available. We report here on approximately 4,700 samples, largely foraminifers, from surface localities in the San Francisco Bay region of California. The information contained here can be used to update geologic maps, to analyze the depth and temperature of ocean water covering parts of California during the Mesozoic and Cenozoic eras, and for solving other geologic problems.

Compositional controls on early diagenetic pathways in fine-grained sedimentary rocks: Implications for predicting unconventional reservoir attributes of mudstones

USGS Publications Warehouse

Keller, Margaret A.; Macquaker, Joe H.S.; Taylor, Kevin G.; Polya, David

2014-01-01

Diagenesis significantly impacts mudstone lithofacies. Processes operating to control diagenetic pathways in mudstones are poorly known compared to analogous processes occurring in other sedimentary rocks. Selected organic-carbon-rich mudstones, from the Kimmeridge Clay and Monterey Formations, have been investigated to determine how varying starting compositions influence diagenesis.The sampled Kimmeridge Clay Formation mudstones are organized into thin homogenous beds, composed mainly of siliciclastic detritus, with some constituents derived from water-column production (e.g., coccoliths, S-depleted type-II kerogen, as much as 52.6% total organic carbon [TOC]) and others from diagenesis (e.g., pyrite, carbonate, and kaolinite). The sampled Monterey Formation mudstones are organized into thin beds that exhibit pelleted wavy lamination, and are predominantly composed of production-derived components including diatoms, coccoliths, and foraminifera, in addition to type-IIS kerogen (as much as 16.5% TOC), and apatite and silica cements.During early burial of the studied Kimmeridge Clay Formation mudstones, the availability of detrital Fe(III) and reactive clay minerals caused carbonate- and silicate-buffering reactions to operate effectively and the pore waters to be Fe(II) rich. These conditions led to pyrite, iron-poor carbonates, and kaolinite cements precipitating, preserved organic carbon being S-depleted, and sweet hydrocarbons being generated. In contrast, during the diagenesis of the sampled Monterey Formation mudstones, sulfide oxidation, coupled with opal dissolution and the reduced availability of both Fe(III) and reactive siliciclastic detritus, meant that the pore waters were poorly buffered and locally acidic. These conditions resulted in local carbonate dissolution, apatite and silica cements precipitation, natural kerogen sulfurization, and sour hydrocarbons generation.Differences in mud composition at deposition significantly influence subsequent diagenesis. These differences impact their source rock attributes and mechanical properties.

Variability over time in the sources of South Portuguese Zone turbidites: evidence of denudation of different crustal blocks during the assembly of Pangaea

NASA Astrophysics Data System (ADS)

Pereira, M. F.; Ribeiro, C.; Vilallonga, F.; Chichorro, M.; Drost, K.; Silva, J. B.; Albardeiro, L.; Hofmann, M.; Linnemann, U.

2014-07-01

This study combines geochemical and geochronological data in order to decipher the provenance of Carboniferous turbidites from the South Portuguese Zone (SW Iberia). Major and trace elements of 25 samples of graywackes and mudstones from the Mértola (Visean), Mira (Serpukhovian), and Brejeira (Moscovian) Formations were analyzed, and 363 U-Pb ages were obtained on detrital zircons from five samples of graywackes from the Mira and Brejeira Formations using LA-ICPMS. The results indicate that turbiditic sedimentation during the Carboniferous was marked by variability in the sources, involving the denudation of different crustal blocks and a break in synorogenic volcanism. The Visean is characterized by the accumulation of immature turbidites (Mértola Formation and the base of the Mira Formation) inherited from a terrane with intermediate to mafic source rocks. These source rocks were probably formed in relation to Devonian magmatic arcs poorly influenced by sedimentary recycling, as indicated by the almost total absence of pre-Devonian zircons typical of the Gondwana and/or Laurussia basements. The presence of Carboniferous grains in Visean turbidites indicates that volcanism was active at this time. Later, Serpukhovian to Moscovian turbiditic sedimentation (Mira and Brejeira Formations) included sedimentary detritus derived from felsic mature source rocks situated far from active magmatism. The abundance of Precambrian and Paleozoic zircons reveals strong recycling of the Gondwana and/or Laurussia basements. A peri-Gondwanan provenance is indicated by zircon populations with Neoproterozoic (Cadomian-Avalonian and Pan-African zircon-forming events), Paleoproterozoic, and Archean ages. The presence of late Ordovician and Silurian detrital zircons in Brejeira turbidites, which have no correspondence in the Gondwana basement of SW Iberia, indicates Laurussia as their most probable source.

Geochemical and stable isotopic data on barren and mineralized drill core in the Devonian Popovich Formation, Screamer sector of the Betze-Post gold deposit, northern Carlin trend, Nevada

USGS Publications Warehouse

Christiansen, William D.; Hofstra, Albert H.; Zohar, Pamela B.; Tousignant, Gilles

2011-01-01

The Devonian Popovich Formation is the major host for Carlin-type gold deposits in the northern Carlin trend of Nevada. The Popovich is composed of gray to black, thin-bedded, calcareous to dolomitic mudstone and limestone deposited near the carbonate platform margin. Carlin-type gold deposits are Eocene, disseminated, auriferous pyrite deposits characterized by acid leaching, sulfidation, and silicification that are typically hosted in Paleozoic calcareous sedimentary rocks exposed in windows through siliceous sedimentary rocks of the Roberts Mountains allochthon. The Carlin trend currently is the largest gold producer in the United States. The Screamer ore zone is a tabular body on the periphery of the huge Betze-Post gold deposit. Screamer is a good place to study both the original lithogeochemistry of the Popovich Formation and the effects of subsequent alteration and mineralization because it is below the level of supergene oxidation, mostly outside the contact metamorphic aureole of the Jurassic Goldstrike stock, has small, high-grade ore zones along fractures and Jurassic dikes, and has intervening areas with lower grade mineralization and barren rock. In 1997, prior to mining at Screamer, drill core intervals from barren and mineralized Popovich Formation were selected for geochemical and stable isotope analysis. The 332, five-foot core samples analyzed are from five holes separated by as much as 2000 feet (600 meters). The samples extend from the base of the Wispy unit up through the Planar and Soft sediment deformation units into the lower part of the upper Mud unit of the Popovich Formation.

The Haselgebirge evaporitic mélange in central Northern Calcareous Alps (Austria): Part of the Permian to Lower Triassic rift of the Meliata ocean?

PubMed

Schorn, Anja; Neubauer, Franz; Genser, Johann; Bernroider, Manfred

2013-01-11

For the reconstruction of Alpine tectonics of the Eastern Alps, the evaporitic Permian to Lower Triassic Haselgebirge Formation plays a key role in (1) the origin of Haselgebirge bearing nappes, (2) the inclusion of magmatic and metamorphic rocks revealing tectonic processes not preserved in other units, and (3) the debated mode of emplacement of the nappes, namely gravity-driven or tectonic. Within the Moosegg quarry of the central Northern Calcareous Alps gypsum/anhydrite bodies are tectonically mixed with lenses of sedimentary rocks and decimeter- to meter-sized tectonic clasts of plutonic and subvolcanic rocks and rare metamorphics. We examined various types of (1) widespread biotite-diorite, meta-syenite, (2) meta-dolerite and rare ultramafic rocks (serpentinite, pyroxenite) as well as (3) rare metamorphic banded meta-psammitic schists and meta-doleritic blueschists. The apparent 40 Ar/ 39 Ar biotite ages from three biotite-diorite, meta-dolerite and meta-doleritic blueschist samples with variable composition and fabrics range from 248 to 270 Ma (e.g., 251.2 ± 1.1 Ma) indicating a Permian age of cooling after magma crystallisation or metamorphism. The chemical composition of biotite-diorite and meta-syenite indicates an alkaline trend interpreted to represent a rift-related magmatic suite. These, as well as Permian to Jurassic sedimentary rocks, were incorporated during Cretaceous nappe emplacement forming the sulphatic Haselgebirge mélange. The scattered 40 Ar/ 39 Ar white mica ages of a meta-doleritic blueschist (of N-MORB origin) and banded meta-psammitic schist are ca. 349 and 378 Ma, respectively, proving the Variscan age of pressure-dominated metamorphism. These ages are similar to detrital white mica ages reported from the underlying Rossfeld Formations, indicating a close source-sink relationship. According to our new data, the Haselgebirge bearing nappe was transported over the Lower Cretaceous Rossfeld Formations, which include many clasts derived from the Haselgebirge Formation and its exotic blocks deposited in front of the incoming nappe comprising the Haselgebirge Formation.

What is shale gas and why is it important?

EIA Publications

2012-01-01

Shale gas refers to natural gas that is trapped within shale formations. Shales are fine-grained sedimentary rocks that can be rich sources of petroleum and natural gas. Over the past decade, the combination of horizontal drilling and hydraulic fracturing has allowed access to large volumes of shale gas that were previously uneconomical to produce. The production of natural gas from shale formations has rejuvenated the natural gas industry in the United States.

The role of the thermal convection of fluids in the formation of unconformity-type uranium deposits: the Athabasca Basin, Canada

NASA Astrophysics Data System (ADS)

Pek, A. A.; Malkovsky, V. I.

2017-05-01

In the global production of uranium, 18% belong to the unconformity-type Canadian deposits localized in the Athabasca Basin. These deposits, which are unique in terms of their ore quality, were primarily studied by Canadian and French scientists. They have elaborated the diagenetic-hydrothermal hypothesis of ore formation, which suggests that (1) the deposits were formed within a sedimentary basin near an unconformity surface dividing the folded Archean-Proterozoic metamorphic basement and a gently dipping sedimentary cover, which is not affected by metamorphism; (2) the spatial accommodation of the deposits is controlled by the rejuvenated faults in the basement at their exit into the overlying sedimentary sequence; the ore bodies are localized above and below the unconformity surface; (3) the occurrence of graphite-bearing rocks is an important factor in controlling the local structural mineralization; (4) the ore bodies are the products of uranium precipitation on a reducing barrier. The mechanism that drives the circulation of ore-forming hydrothermal solutions has remained one of the main unclear questions in the general genetic concept. The ore was deposited above the surface of the unconformity due to the upflow discharge of the solution from the fault zones into the overlying conglomerate and sandstone. The ore formation below this surface is a result of the downflow migration of the solutions along the fault zones from sandstone into the basement rocks. A thermal convective system with the conjugated convection cells in the basement and sedimentary fill of the basin may be a possible explanation of why the hydrotherms circulate in the opposite directions. The results of our computations in the model setting of the free thermal convection of fluids are consistent with the conceptual reasoning about the conditions of the formation of unique uranium deposits in the Athabasca Basin. The calculated rates of the focused solution circulation through the fault zones in the upflow and downflow branches of a convection cell allow us to evaluate the time of ore formation up to the first hundreds of thousands years.

Geochemistry of shale and sedimentary pyrite as a proxy for gold fertility in the Selwyn basin area, Yukon

NASA Astrophysics Data System (ADS)

Sack, Patrick J.; Large, Ross R.; Gregory, Daniel D.

2018-01-01

Selwyn basin area strata contain sedimentary pyrite with Au above background levels when analyzed by laser ablation-inductively coupled mass spectrometry. Hyland Group rocks contain framboidal pyrite contents of 670 ppb Au, 1223 ppm As, and 5.3 ppm Te; the mean of all types of sedimentary pyrite in the Hyland Group is 391 ppb Au, 1489 ppm As, and 3.8 ppm Te. These levels are similar to sedimentary pyrite in host lithologies from major orogenic gold districts in New Zealand and Australia. Comparison of whole rock and pyrite data show that rocks deposited in continental slope settings with significant terrigenous input contain pyrite that is consistently enriched in Au, As, Te, Co, and Cu. Although data are limited, whole rock samples of stratigraphic units containing Au-rich pyrite also contain high Au, indicating that most of the Au is within sedimentary pyrite. Based on geologic characteristics and comparison of pyrite chemistry data with whole rock chemistry, Selwyn basin area strata have the necessary ingredients to form orogenic gold deposits: Au-enriched source rocks, metamorphic conditions permissive of forming a metamorphic ore fluid, and abundant structural preparation for channeling fluids and depositing ore.

Isotope and fluid inclusion studies of geological and hydrothermal processes, northern Peru

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacFarlane, A.W.; Prol-Ledesma, R.M.; Conrad, M.E.

1994-07-01

Mineralization in the Hualgayoc district of northern Peru occurs in altered Miocene felsic intrusions and in mid-Cretaceous platform sedimentary rocks of the Goyllarisquizga, Inca, and Chulec formations. The ores occur both as stratiform and stratabound pyritiferous base-metal deposits (mantos), and as steeply dipping, sedimentary and intrusive rock-hosted base-metal veins. Igneous rocks in the district are affected by propylytic, sericitic-argillic, sericitic, potassic, and acid-sulfate alteration. K-Ar and Rb-Sr dating and geological evidence indicate multiple stages of intrusive activity and hydrothermal alteration, including close spatial emplacement of two or more separate Miocene magmatic-hydrothermal systems. K-Ar dates on sericite, hydrothermal biotite, and alunitemore » indicate that the most important hydrothermal episodes in the district took place {approx}13.24 and 12.4 Ma. Other K-Ar dates on altered rocks in the district may reflect various amounts of resetting by the emplacement of the 9.05 {+-} 0.2 Ma Hualgayoc rhyodacite. A five-point Rb-Sr isochron for the San Miguel intrusion at Cerro Coymolache yields an age of 45 {+-} 3.4 Ma, which indicates much earlier magmatic activity in this area than recognized previously. Fluid inclusion and paragenetic studies reveal a clear temporal evolution of fluid temperature and chemistry in the San Agustin area at Hualgayoc. Gradually, ore formation shifted to precipitation of vein minerals in the brittle fractures as the mantos became less permeable and were sealed off. Vein formation continued from progressively cooler and more diluted fluids (down to {approx}150{degrees}C and 4.3 wt% NaCl equivalent) as the system waned. No evidence for phase separation is observed in the fluids until the very last paragenetic stage, which contributed no economic mineralization. 53 refs., 15 figs., 7 tabs.« less

In situ trace metal analysis of Neoarchaean--Ordovician shallow-marine microbial-carbonate-hosted pyrites.

PubMed

Gallagher, M; Turner, E C; Kamber, B S

2015-07-01

Pre-Cambrian atmospheric and oceanic redox evolutions are expressed in the inventory of redox-sensitive trace metals in marine sedimentary rocks. Most of the currently available information was derived from deep-water sedimentary rocks (black shale/banded iron formation). Many of the studied trace metals (e.g. Mo, U, Ni and Co) are sensitive to the composition of the exposed land surface and prevailing weathering style, and their oceanic inventory ultimately depends on the terrestrial flux. The validity of claims for increased/decreased terrestrial fluxes has remained untested as far as the shallow-marine environment is concerned. Here, the first systematic study of trace metal inventories of the shallow-marine environment by analysis of microbial carbonate-hosted pyrite, from ca. 2.65-0.52 Ga, is presented. A petrographic survey revealed a first-order difference in preservation of early diagenetic pyrite. Microbial carbonates formed before the 2.4 Ga great oxygenation event (GOE) are much richer in pyrite and contain pyrite grains of greater morphological variability but lesser chemical substitution than samples deposited after the GOE. This disparity in pyrite abundance and morphology is mirrored by the qualitative degree of preservation of organic matter (largely as kerogen). Thus, it seems that in microbial carbonates, pyrite formation and preservation were related to presence and preservation of organic C. Several redox-sensitive trace metals show interpretable temporal trends supporting earlier proposals derived from deep-water sedimentary rocks. Most notably, the shallow-water pyrite confirms a rise in the oceanic Mo inventory across the pre-Cambrian-Cambrian boundary, implying the establishment of efficient deep-ocean ventilation. The carbonate-hosted pyrite also confirms the Neoarchaean and early Palaeoproterozoic ocean had higher Ni concentration, which can now more firmly be attributed to a greater proportion of magnesian volcanic rock on land rather than a stronger hydrothermal flux of Ni. Additionally, systematic trends are reported for Co, As, and Zn, relating to terrestrial flux and oceanic productivity. © 2015 John Wiley & Sons Ltd.

The southwestern alaska mercury belt and its relationship to the circum-pacific metallogenic mercury province

USGS Publications Warehouse

Gray, J.E.; Gent, C.A.; Snee, L.W.

2000-01-01

A belt of small but numerous mercury deposits extends for about 500 km in the Kuskokwim River region of southwestern Alaska. The southwestern Alaska mercury belt is part of widespread mercury deposits of the circumPacific region that are similar to other mercury deposits throughout the world because they are epithermal with formation temperatures of about 200??C, the ore is dominantly cinnabar with Hg-Sb-As??Au geochemistry, and mineralized forms include vein, vein breccias, stockworks, replacements, and disseminations. The southwestern Alaska mercury belt has produced about 1,400 t of mercury, which is small on an international scale. However, additional mercury deposits are likely to be discovered because the terrain is topographically low with significant vegetation cover. Anomalous concentrations of gold in cinnabar ore suggest that gold deposits are possible in higher temperature environments below some of the Alaska mercury deposits. We correlate mineralization of the southwestern Alaska mercury deposits with Late Cretaceous and early Tertiary igneous activity. Our 40Ar/39Ar ages of 70??3 Ma from hydrothermal sericites in the mercury deposits indicate a temporal association of igneous activity and mineralization. Furthermore, we suggest that our geological and geochemical data from the mercury deposits indicate that ore fluids were generated primarily in surrounding sedimentary wall rocks when they were cut by Late Cretaceous and early Tertiary intrusions. In our ore genesis model, igneous activity provided the heat to initiate dehydration reactions and expel fluids from hydrous minerals and formational waters in the surrounding sedimentary wall rocks, causing thermal convection and hydrothermal fluid flow through permeable rocks and along fractures and faults. Our isotopic data from sulfide and alteration minerals of the mercury deposits indicate that ore fluids were derived from multiple sources, with most ore fluids originating from the sedimentary wall rocks.

Source rock potential in Pakistan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raza, H.A.

1991-03-01

Pakistan contains two sedimentary basins: Indus in the east and Balochistan in the west. The Indus basin has received sediments from precambrian until Recent, albeit with breaks. It has been producing hydrocarbons since 1914 from three main producing regions, namely, the Potwar, Sulaisman, and Kirthar. In the Potwar, oil has been discovered in Cambrian, Permian, Jurassic, and Tertiary rocks. Potential source rocks are identified in Infra-Cambrian, Permian, Paleocene, and Eocene successions, but Paleocene/Eocene Patala Formation seems to be the main source of most of the oil. In the Sulaiman, gas has been found in Cretaceous and Tertiary; condensate in Cretaceousmore » rocks. Potential source rocks are indicated in Cretaceous, Paleocene, and Eocene successions. The Sembar Formation of Early Cretaceous age appears to be the source of gas. In the Kirthar, oil and gas have been discovered in Cretaceous and gas has been discovered in paleocene and Eocene rocks. Potential source rocks are identified in Kirthar and Ghazij formations of Eocene age in the western part. However, in the easter oil- and gas-producing Badin platform area, Union Texas has recognized the Sembar Formation of Early Cretaceous age as the only source of Cretaceous oil and gas. The Balochistan basin is part of an Early Tertiary arc-trench system. The basin is inadequately explored, and there is no oil or gas discovery so far. However, potential source rocks have been identified in Eocene, Oligocene, Miocene, and Pliocene successions based on geochemical analysis of surface samples. Mud volcanoes are present.« less

Recognition of primary and diagenetic magnetizations to determine the magnetic polarity record and timing of deposition of the moat-fill rocks of the Oligocene Creede Caldera, Colorado

USGS Publications Warehouse

Reynolds, Richard L.; Rosenbaum, Joseph G.; Sweetkind, Donald S.; Lanphere, Marvin A.; Robert, Andrew P.; Verosub, Kenneth L.

2000-01-01

Sedimentary and volcaniclastic rocks of the Oligocene Creede Formation fill the moat of the Creede caldera, which formed at about 26.9 Ma during the eruption of the Snowshoe Mountain Tuff. Paleomagnetic and rock magnetic studies of two cores (418 and 703 m long) that penetrated the lower half of the Creede Formation, in addition to paleomagnetic and isotopic dating studies of stratigraphically bracketing volcanic units, provide information on the age and the time span of sedimentation of the caldera fill. Normal polarity magnetization are found in Snowshoe Mountain Tuff beneath the moat sediments; in detrital-magnetite-bearing graded tuffs near the bottom of the moat fill; in an ash-fall deposit about 200 m stratigraphically about the top of core 2; and in postcaldera lava flows of the Fisher Dacite that overlie the Creede Formation. Normal polarity also characterizes detrital-magnetite-bearing tuff and sandstone unites within the caldera moat rocks that did not undergo severe sulfidic alteration. The combination of initially low magnitude of remanent magnetization and the destructive effects of subsequent diagenetic sulfidization on detrital iron oxides results in a poor paleomagnetic record for the fine-grained sedimentary rocks of the Creede Formation. these fine-grained rocks have either normal or revered polarity magnetizations that are carried by magnetite and/or maghemite. Many more apparent reversals are found that can be accommodated by any geomagnetic polarity time scale over the interval spanned by the ages of the bracketing extrusive rocks. Moreover, opposite polarity magnetization are found in specimens separated by only a few centimeters, without intervening hiatuses, and by specimens in several tuff beds, each of which represents a single depositional event. These polarity changes cannot, therefore, be attributed to detrital remanent magnetization. Many polarity changes are apparently related to chemical remanent magnetizations carried by postdepositional magnetite and maghemite that formed in rocks in which most or all detrital megnetic iron oxide was destroyed. Incipient oxidation of early diagenetic pyrite may have normal polarity Snowshoe Mountain Tuff (26.89 ± 0.0 Ma, 1 δ) and on the normal polarity postcaldera Fisher lava flows (as young as 26.23 ± 0.05 Ma, 1 δ) indicate that deposition of the Creede Formation spanned about 340-660 k.y. The intermittently defined normal polarity magnetization for the caldera-fill sequence, compared with different versions of the geomagnetic polarity time scale, is consistent with the shorter time span.

Preliminary three-dimensional geohydrologic framework of the San Antonio Creek Groundwater Basin, Santa Barbara County, California

NASA Astrophysics Data System (ADS)

Cromwell, G.; Sweetkind, D. S.; O'leary, D. R.

2017-12-01

The San Antonio Creek Groundwater Basin is a rural agricultural area that is heavily dependent on groundwater to meet local water demands. The U.S. Geological Survey (USGS) is working cooperatively with Santa Barbara County and Vandenberg Air Force Base to assess the quantity and quality of the groundwater resources within the basin. As part of this assessment, an integrated hydrologic model that will help stakeholders to effectively manage the water resources in the basin is being developed. The integrated hydrologic model includes a conceptual model of the subsurface geology consisting of stratigraphy and variations in lithology throughout the basin. The San Antonio Creek Groundwater Basin is a relatively narrow, east-west oriented valley that is structurally controlled by an eastward-plunging syncline. Basin-fill material beneath the valley floor consists of relatively coarse-grained, permeable, marine and non-marine sedimentary deposits, which are underlain by fine-grained, low-permeability, marine sedimentary rocks. To characterize the system, surficial and subsurface geohydrologic data were compiled from geologic maps, existing regional geologic models, and lithology and geophysical logs from boreholes, including two USGS multiple-well sites drilled as part of this study. Geohydrologic unit picks and lithologic variations are incorporated into a three-dimensional framework model of the basin. This basin (model) includes six geohydrologic units that follow the structure and stratigraphy of the area: 1) Bedrock - low-permeability marine sedimentary rocks; 2) Careaga Formation - fine to coarse grained near-shore sandstone; 3) Paso Robles Formation, lower portion - sandy-gravely deposits with clay and limestone; 4) Paso Robles Formation, middle portion - clayey-silty deposits; 5) Paso Robles Formation, upper portion - sandy-gravely deposits; and 6) recent Quaternary deposits. Hydrologic data show that the upper and lower portions of the Paso Robles Formation are the primary grou­ndwater-bearing units within the basin, and that the fine-grained layer within this Formation locally restricts vertical groundwater flow.

Magmatic and Crustal Differentiation History of Granitic Rocks from Hf-O Isotopes in Zircon

NASA Astrophysics Data System (ADS)

Kemp, , A. I. S.; Hawkesworth, , C. J.; Foster, , G. L.; Paterson, , B. A.; Woodhead, , J. D.; Hergt, , J. M.; Gray, , C. M.; Whitehouse, M. J.

2007-02-01

Granitic plutonism is the principal agent of crustal differentiation, but linking granite emplacement to crust formation requires knowledge of the magmatic evolution, which is notoriously difficult to reconstruct from bulk rock compositions. We unlocked the plutonic archive through hafnium (Hf) and oxygen (O) isotope analysis of zoned zircon crystals from the classic hornblende-bearing (I-type) granites of eastern Australia. This granite type forms by the reworking of sedimentary materials by mantle-like magmas instead of by remelting ancient metamorphosed igneous rocks as widely believed. I-type magmatism thus drives the coupled growth and differentiation of continental crust.

Modelisation numerique de tunnels de metro dans les massifs rocheux sedimentaires de la region de Montreal

NASA Astrophysics Data System (ADS)

Lavergne, Catherine

Geological formations of the Montreal area are mostly made of limestones. The usual approach for design is based on rock mass classification systems considering the rock mass as an equivalent continuous and isotropic material. However, for shallow excavations, stability is generally controlled by geological structures, that in Montreal, are bedding plans that give to the rock mass a strong strain and stress anisotropy. Objects of the research are to realize a numerical modeling that considers sedimentary rocks anisotropy and to determine the influence of the design parameters on displacements, stresses and failure around metro unsupported underground excavations. Geotechnical data used for this study comes from a metro extension project and has been made available to the author. The excavation geometries analyzed are the tunnel, the station and a garage consisting of three (3) parallel tunnels for rock covered between 4 and 16 m. The numerical modeling has been done with FLAC software that represents continuous environment, and ubiquitous joint behavior model to simulate strength anisotropy of sedimentary rock masses. The model considers gravity constraints for an anisotropic material and pore pressures. In total, eleven (11) design parameters have been analyzed. Results show that unconfined compressive strength of intact rock, fault zones and pore pressures in soils have an important influence on the stability of the numerical model. The geometry of excavation, the thickness of rock covered, the RQD, Poisson's ratio and the horizontal tectonic stresses have a moderate influence. Finally, ubiquitous joint parameters, pore pressures in rock mass, width of the pillars of the garage and the damage linked to the excavation method have a low impact. FLAC results have been compared with those of UDEC, a software that uses the distinct element method. Similar conclusions were obtained on displacements, stress state and failure modes. However, UDEC model give slightly less conservative results than FLAC. This study stands up by his local character and the large amount of geotechnical data available used to determine parameters of the numerical model. The results led to recommendations for laboratory tests that can be applied to characterize more specifically anisotropy of sedimentary rocks.

High-pressure mechanical instability in rocks

USGS Publications Warehouse

Byerlee, J.D.; Brace, W.F.

1969-01-01

At a confining pressure of a few kilobars, deformation of many sedimentary rocks, altered mafic rocks, porous volcanic rocks, and sand is ductile, in that instabilities leading to audible elastic shocks are absent. At pressures of 7 to 10 kilobars, however, unstable faulting and stick-slip in certain of these rocks was observed. This high pressure-low temperature instability might be responsible for earthquakes in deeply buried sedimentary or volcanic sequences.

High-pressure mechanical instability in rocks.

PubMed

Byerlee, J D; Brace, W F

1969-05-09

At a confining pressure of a few kilobars, deformation of many sedimentary rocks, altered mafic rocks, porous volcanic rocks, and sand is ductile, in that instabilities leading to audible elastic shocks are absent. At pressures of 7 to 10 kilobars, however, unstable faulting and stick-slip in certain of these rocks was observed. This high pressure-low temperature instability might be responsible for earthquakes in deeply buried sedimentary or volcanic sequences.

Radiolarian biostratigraphy of the Quinn River Formation, Black Rock terrane, north-central Nevada: correlations with eastern Klamath terrane geology

USGS Publications Warehouse

Blome, C.D.; Reed, K.M.

1995-01-01

The Quinn River Formation, Black Rock terrane, Quinn River Crossing, is one of the few Nevadan sections of Permian and Triassic strata that are unaffected by Sonoman deformation. The formation consists of: 1) a basal tuff overlain by limestone and ferruginous dolomite, 2) interbedded radiolarian-bearing chert and argillite, 3) siltstone and carbonaceous shale, and 4) partly volcaniclastic rocks. All but the uppermost (barren) chert samples contain Late Permian radiolarian taxa. These radiolarians suggest that early Wordian conodonts reported from near the top of the chert and argillite unit are reworked. Poorly preserved Early(?) or Middle triassic radiolarians and Middle Triassic ammonites and pectenacid bivalves from the middle part of the volcaniclastic unit indicate the Early Triassic deposition cannot be documented at Quinn River. The ages of the Quinn River brachiopod, conodont, and radiolarian faunas resemble those of the Dekkas and Pit Formations, eastern Klamath terrane, northern California. The analogous Quinn River and eastern Klamath rock types and faunal ages, as well as similar hiatuses in their stratigraphic records, suggest that they may be lateral equivalents that formed in the same island-arc sedimentary basin. -from Authors

Astrobiology Investigations at a Martian Hematite Site

NASA Technical Reports Server (NTRS)

Allen, Carlton, C.; Westall, Frances; Schelble, Rachel T.

2001-01-01

Christensen et al, using data from the Mars Global Surveyor Thermal Emission Spectrometer (TES), have identified gray crystalline hematite in a 350 km by 750 km region near Sinus Meridiani. The deposit corresponds closely to the low-albedo highlands unit 'sm', mapped as a wind-eroded, ancient, subaqueous sedimentary deposit. Christensen et al interpreted the Sinus Meridiani deposit to be 'an in-place, rock-stratigraphic sedimentary unit characterized by smooth, friable layers composed primarily of basaltic sediments with approximately 10 to 15 % crystalline gray hematite.' Christensen et al discussed five possible mechanisms for the formation of this deposit: direct precipitation from standing, oxygenated, Fe-rich water; precipitation from Fe-rich hydrothermal fluids; low-temperature dissolution and precipitation through mobile groundwater leaching; surface weathering and coatings; thermal oxidation of magnetite-rich lavas. Four of these mechanisms involve the interactions of rock with water, and thus have implications in the search for evidence of microbial life.

Determining the Accuracy of Paleomagnetic Remanence and High-Resolution Chronostratigraphy for Sedimentary Rocks using Rock Magnetics

NASA Astrophysics Data System (ADS)

Kodama, K. P.

2017-12-01

The talk will consider two broad topics in rock magnetism and paleomagnetism: the accuracy of paleomagnetic remanence and the use of rock magnetics to measure geologic time in sedimentary sequences. The accuracy of the inclination recorded by sedimentary rocks is crucial to paleogeographic reconstructions. Laboratory compaction experiments show that inclination shallows on the order of 10˚-15˚. Corrections to the inclination can be made using the effects of compaction on the directional distribution of secular variation recorded by sediments or the anisotropy of the magnetic grains carrying the ancient remanence. A summary of all the compaction correction studies as of 2012 shows that 85% of sedimentary rocks studied have enjoyed some amount of inclination shallowing. Future work should also consider the effect of grain-scale strain on paleomagnetic remanence. High resolution chronostratigraphy can be assigned to a sedimentary sequence using rock magnetics to detect astronomically-forced climate cycles. The power of the technique is relatively quick, non-destructive measurements, the objective identification of the cycles compared to facies interpretations, and the sensitivity of rock magnetics to subtle changes in sedimentary source. An example of this technique comes from using rock magnetics to identify astronomically-forced climate cycles in three globally distributed occurrences of the Shuram carbon isotope excursion. The Shuram excursion may record the oxidation of the world ocean in the Ediacaran, just before the Cambrian explosion of metazoans. Using rock magnetic cyclostratigraphy, the excursion is shown to have the same duration (8-9 Myr) in southern California, south China and south Australia. Magnetostratigraphy of the rocks carrying the excursion in California and Australia shows a reversed to normal geomagnetic field polarity transition at the excursion's nadir, thus supporting the synchroneity of the excursion globally. Both results point to a primary depositional origin for the excursion, and strengthens the argument for oxidation of the world ocean in the Ediacaran. Future work must learn how global climate is encoded by rock magnetics, but our work to date suggests that variations in continental run-off are detected by rock magnetics.

Sedimentary Rocks of Aram Chaos

NASA Technical Reports Server (NTRS)

2004-01-01

4 February 2004 Aram Chaos is a large meteor impact crater that was nearly filled with sediment. Over time, this sediment was hardened to form sedimentary rock. Today, much of the eastern half of the crater has exposures of light-toned sedimentary rock, such as the outcrops shown in this Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image. The picture is located near 2.0oN, 20.3oW, and covers an area 3 km (1.9 mi) wide. Sunlight illuminates the scene from the left.

In-situ Detection of Squalane in Sedimentary Organic Matter Using Monoclonal Antibodies

NASA Astrophysics Data System (ADS)

Bailey, J. V.; Corsetti, F. A.; Moldowan, J. M.; Fago, F.; Caron, D.

2008-12-01

Sedimentary geolipids can serve as powerful tools for reconstructing ancient ecosystems, but only if investigators can demonstrate that the hydrocarbons are indigenous to their host rocks. The association of molecules with primary sedimentary fabrics could indicate a syngenetic relationship. However, traditional biomarker analyses require extraction from large quantities of powdered rock, confounding detailed spatial correlations. Biological studies commonly use antibodies as extremely sensitive molecular probes. When coupled with fluorescent labels, antibodies allow for the visual localization of molecules. Here we show that monoclonal antibodies that bind specifically to geolipid compounds can be used for in situ detection and labeling of such compounds in mineral-bound organic macerals. Monoclonal antibodies to squalene, produced for human health studies, also react with the geolipid, squalane. We show that squalene antibodies do not react with other common sedimentary hydrocarbons. We also show that squalane antibodies bind specifically to isolated organic-rich lamina in Eocene-age, squalane-containing rocks. These results suggest that squalane is confined to discrete organo-sedimentary fabrics within those rocks, providing evidence for its syngeneity. The chemical similarity of squalane to other sedimentary hydrocarbons hints at the potential for developing monoclonal antibodies to a variety of biomarkers that could then be localized in rocks, sediments, and extant cells.

Selection of superior salt/boron tolerant Stanleya pinnata genotypes and quantification of their selenium phytoremediation abilities in drainage sediment.

USDA-ARS?s Scientific Manuscript database

The semi-metallic mineral Se, a naturally-occurring trace element, is primarily found as selenate originating from sedimentary and shale rock formations, e.g., in the western side of the San Joaquin Valley of central California (WSJV). Because selenate-Se is water soluble, bioavailable and biomagnif...

Post-emplacement history of the Zambales Ophiolite Complex: Insights from petrography, geochronology and geochemistry of Neogene clastic rocks

NASA Astrophysics Data System (ADS)

Dimalanta, C. B.; Salapare, R. C.; Faustino-Eslava, D. V.; Ramos, N. T.; Queaño, K. L.; Yumul, G. P.; Yang, T. F.

2015-05-01

The Zambales Ophiolite Complex in Luzon, Philippines is made up of two blocks with differing geochemical signatures and ages - the Middle Jurassic to Early Cretaceous Acoje Block-San Antonio Massif that is of island arc tholeiite composition and the Eocene Coto Block-Cabangan Massif which is of transitional mid-ocean ridge basalt-island arc tholeiite affinity. These ophiolitic bodies are overlain by Miocene to Pliocene sedimentary units whose petrochemistry are reported here for the first time. Varying degrees of influences from ophiolitic detritus and from arc volcanic materials, as shown by petrography and indicator elements including Cr, Co and Ni, are observed in these sedimentary formations from north to south and from the oldest to the youngest. The Early to Middle Miocene Cabaluan Formation, whose outcrops are found to overlie only the Acoje Block, registers a more dominant ophiolitic signature as compared to the Late Miocene to Pliocene Santa Cruz Formation. The Santa Cruz Formation is generally characterized by fewer ophiolitic clasts and higher amounts of felsic components. Additionally, within this formation itself, a pronounced compositional change is observed relative to its spatial distribution. From the south to the north, an increase in ophiolitic components and a relative decrease in felsic signature is noted in units of the Santa Cruz Formation. It is therefore inferred that changes in the petrochemistry of rocks from the older Cabaluan to the younger Santa Cruz sedimentary formations record a decline in the influx of ophiolitic detritus or, conversely, the introduction of more diverse sediment sources as the deposition progressed. Detrital zircon U-Pb ages from the Santa Cruz Formation, with peaks at 46.73 ± 0.94 and 5.78 ± 0.13 Ma, reflects this change in provenance from the unroofing of an Early Eocene oceanic crust to fresh contributions from an active volcanic arc during the Late Miocene. The contrast in compositions of the southern and northern Santa Cruz Formation also indicates a closer proximity of the southern units to the source of these non-ophiolitic sources, which most likely corresponds to the Pliocene volcanoes of the West Luzon Arc.

Finite-strain analysis of Metavolcano-sedimentary rocks at Gabel El Mayet area, Central Eastern Desert, Egypt

NASA Astrophysics Data System (ADS)

Kassem, Osama M. K.; Abd El Rahim, Said H.

2010-09-01

Finite strain was estimated in the metavolcano-sedimentary rocks, which surround by serpentinites of Gabel El Mayet area. Finite strain shows a relationship to nappe contacts between the metavolcano-sedimentary rocks and serpentinite and sheds light on the nature of the subhorizontal foliation typical for the Gable Mayet shear zone. We used the Rf/ ϕ and Fry methods on feldspar porphyroclasts and mafic grains from 10 metasedimentary and six metavolcanic samples in Gabel El Mayet region. Our finite-strain data show that the metavolcano-sedimentary rocks were moderately deformed and axial ratios in the XZ section range from 1.9 to 3.9. The long axes of the finite-strain ellipsoids trend W/WNW in the north and W/WSW in the south of the Gabel El Mayet shear zone. Furthermore, the short axes are subvertical to a subhorizontal foliation. The strain magnitudes increase towards the tectonic contacts between the metavolcano-sedimentary rocks and serpentinite. The data indicate oblate strain symmetry in the metavolcano-sedimentary rocks. Hence, our strain data also indicate flattening strain. We assume that the metasedimentary and metavolcanics rocks have similar deformation behaviour. The fact that finite strain accumulated during the metamorphism indicates that the nappe contacts formed during the accumulation of finite strain and thus during thrusting. We conclude that the nappe contacts formed during progressive thrusting under brittle to semi-brittle deformation conditions by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the Gabel El Mayet shear zone.

Cover sequences at the northern margin of the Antongil Craton, NE Madagascar

USGS Publications Warehouse

Bauer, W.; Walsh, G.J.; De Waele, B.; Thomas, Ronald J.; Horstwood, M.S.A.; Bracciali, L.; Schofield, D.I.; Wollenberg, U.; Lidke, D.J.; Rasaona, I.T.; Rabarimanana, M.H.

2011-01-01

The island of Madagascar is a collage of Precambrian, generally high-grade metamorphic basement domains, that are locally overlain by unmetamorphosed sedimentary rocks and poorly understood low-grade metasediments. In the Antalaha area of NE Madagascar, two distinct cover sequences rest on high-grade metamorphic and igneous basement rocks of the Archaean Antongil craton and the Neoproterozoic Bemarivo belt. The older of these two cover sequences, the Andrarona Group, consists of low-grade metasedimentary rocks. The younger sequence, the newly defined Ampohafana Formation, consists of unmetamorphosed sedimentary rocks. The Andrarona Group rests on Neoarchaean granites and monzogranites of the Antongil craton and consists of a basal metagreywacke, thick quartzites and an upper sequence of sericite-chlorite meta-mudstones, meta-sandstones and a volcaniclastic meta-sandstone. The depositional age of the volcaniclastic meta-sandstone is constrained in age by U–Pb laser-ablation ICP-MS analyses of euhedral zircons to 1875 ± 8 Ma (2σ). Detrital zircons of Archaean and Palaeoproterozoic age represent an input from the Antongil craton and a newly defined Palaeoproterozoic igneous unit, the Masindray tonalite, which underlies the Andrarona Group, and yielded a U–Pb zircon age of 2355 ± 11 Ma (2σ), thus constraining the maximum age of deposition of the basal part of the Andrarona Group. The Andrarona Group shows a low-grade metamorphic overprint in the area near Antalaha; illite crystallinity values scatter around 0.17°Δ2Θ CuKα, which is within the epizone. The Ampohafana Formation consists of undeformed, polymict conglomerate, cross-bedded sandstone, and red mudstone. An illite crystallinity value of >0.25°Δ2Θ CuKα obtained from the rocks is typical of the diagenetic zone. Occurrences of rhyodacite pebbles in the Ampohafana Formation and the intrusion of a basaltic dyke suggest a deposition in a WSW-ENE-trending graben system during the opening of the Indian Ocean in the Upper Cretaceous, that was characterized by extensive rhyolitic to basaltic magmatism along Madagascar's eastern coast.

Facies-related fracturing in turbidites: insights from the Marnoso-Arenacea Fm. (Northern Apennines, Italy)

NASA Astrophysics Data System (ADS)

Ogata, Kei; Storti, Fabrizio; Balsamo, Fabrizio; Bedogni, Enrico; Tinterri, Roberto; Fetter, Marcos; Gomes, Leonardo; Hatushika, Raphael

2016-04-01

Natural fractures deeply influence subsurface fluid flow, exerting a primary control on resources like aquifers, hydrocarbons and geothermal reservoirs, and on environmental issues like CO2 storage and nuclear waste disposal. In layered sedimentary rocks, depositional processes-imprinted rock rheology favours the development of both mechanical anisotropy and heterogeneity on a wide range of scales, and are thus expected to strongly influence location and frequency of fractures. To better constrain the contribution of stratigraphic, sedimentological and petrophysical attributes, we performed a high-resolution, multidisciplinary study on a selected stratigraphic interval of jointed foredeep turbidites in the Miocene Marnoso-arenacea Formation (Northern Apennines, Italy), which are characterised by a great lateral and vertical variability of grain-size and depositional structures. Statistical relationships among field and laboratory data significantly improve when the single facies scale is considered, and, for similar facies recording different evolutionary stages of the parent turbidity currents, we observed a direct correlation between the three-dimensional anisotropies of rock hardness tensors and the normalized fracture frequencies, testifying for the primary sedimentary flow-related control on fracture distributions.

Rock magnetism and magnetic fabric of the Triassic rocks from the West Spitsbergen Fold-and-Thrust Belt and its foreland

NASA Astrophysics Data System (ADS)

Dudzisz, Katarzyna; Szaniawski, Rafał; Michalski, Krzysztof; Chadima, Martin

2018-03-01

Magnetic fabric and magnetomineralogy of the Early Triassic sedimentary rocks, collected along the length of the West Spitsbergen Fold-and-Thrust Belt (WSFTB) and from subhorizontal beds on its foreland, is presented with the aim to compare magnetic mineralogy of these areas, determine the carriers of magnetic fabric and identify tectonic deformation reflected in the magnetic fabric. Magnetic mineralogy varies and only in part depends on the lithology. The magnetic fabric at all sampling sites is controlled by paramagnetic minerals (phyllosilicates and Fe-carbonates). In the fold belt, it reflects the low degree of deformation in a compressional setting with magnetic lineation parallel to fold axis (NW-SE). This is consistent with pure orthogonal compression model of the WSFTB formation, but it also agrees with decoupling model. Inverse fabric, observed in few sites, is carried by Fe-rich carbonates. In the WSFTB foreland, magnetic lineation reflects the Triassic paleocurrent direction (NE-SW). The alternation between normal and inverse magnetic fabric within the stratigraphic profile could be related to sedimentary cycles.

Source-rock evaluation of outcrop samples from Vanuatu (Malakula, Espiritu Santo, Maewo, and Pentecost)

USGS Publications Warehouse

Buchbinder, Binyamin; Halley, Robert B.

1988-01-01

The samples collected for the present study represent only a portion of the sedimentary column in the various sedimentary basins of Vanuatu.  The characterize only the outer margins of the sedimentary basins and do not necessarily reflect the source-rock potential of the deeper (offshore) parts of the basins.

Thermo-hydro-mechanical coupling in long-term sedimentary rock response

NASA Astrophysics Data System (ADS)

Makhnenko, R. Y.; Podladchikov, Y.

2017-12-01

Storage of nuclear waste or CO2 affects the state of stress and pore pressure in the subsurface and may induce large thermal gradients in the rock formations. In general, the associated coupled thermo-hydro-mechanical effect on long-term rock deformation and fluid flow have to be studied. Principles behind mathematical models for poroviscoelastic response are reviewed, and poroviscous model parameter, the bulk viscosity, is included in the constitutive equations. Time-dependent response (creep) of fluid-filled sedimentary rocks is experimentally quantified at isotropic stress states. Three poroelastic parameters are measured by drained, undrained, and unjacketed geomechanical tests for quartz-rich Berea sandstone, calcite-rich Apulian limestone, and clay-rich Jurassic shale. The bulk viscosity is calculated from the measurements of pore pressure growth under undrained conditions, which requires time scales 104 s. The bulk viscosity is reported to be on the order of 1015 Pa•s for the sandstone, limestone, and shale. It is found to be decreasing with the increase of pore pressure despite corresponding decrease in the effective stress. Additionally, increase of temperature (from 24 ºC to 40 ºC) enhances creep, where the most pronounced effect is reported for the shale with bulk viscosity decrease by a factor of 3. Viscous compaction of fluid-filled porous media allows a generation of a special type of fluid flow instability that leads to formation of high-porosity, high-permeability domains that are able to self-propagate upwards due to interplay between buoyancy and viscous resistance of the deforming porous matrix. This instability is known as "porosity wave" and its formation is possible under conditions applicable to deep CO2 storage in reservoirs and explains creation of high-porosity channels and chimneys. The reported experiments show that the formation of high-permeability pathways is most likely to occur in low-permeable clay-rich materials (caprock representatives) at elevated temperatures.

Paleomagnetism of baked sedimentary rocks in the Newark and Culpeper basins: Evidence for the J1 cusp and significant Late Triassic apparent polar wander from the Mesozoic basins of North America

NASA Astrophysics Data System (ADS)

Kodama, Kenneth P.; Cioppa, Maria T.; Sherwood, Elizabeth; Warnock, Andrew C.

1994-08-01

A paleomagnetic study of 14 sites in the baked sedimentary rocks of the Newark basin Passaic Formation in southeastern Pennsylvania reveals two types of magnetic behavior. Dark gray-colored, baked sedimentary rocks have peak unblocking temperatures of 640°C, high magnetic intensities, and shallow, normal polarity, northeasterly directions. Light gray-colored rocks have peak unblocking temperatures of less than 580°C, low magnetic intensities, and intermediate inclination, normal polarity, northwesterly directions. The low unblocking temperature magnetizations are secondary magnetizations which have declinations similar to but are shallower than the B remagnetization observed by Witte and Kent (1991) throughout the Newark basin. The discrepancy may be due to "underprinting" by an unresolved primary magnetization. The low unblocking temperature magnetization was probably acquired by growth of secondary magnetite during a hydrothermal event, as postulated by Sutter (1988), based on geochronologic data. The high unblocking temperature magnetization is significantly prefolding. Both the low-peak unblocking temperature magnetization and the high-peak unblocking temperature magnetization suggest a 15° counterclockwise block rotation of the Sassamansville syncline. If this rotation is removed from the high unblocking temperature sites collected around the fold, a stronger passage of the fold test results. Six sites were also collected from baked sediments and one site from diabase in northern Virginia's Culpeper basin, since Sutter's geochronological work indicated that the intrusives in the Culpeper basin are coeval to the Newark basin intrusives. Virtual geomagnetic poles (VGPs), based on the tilt-corrected, high-temperature Newark basin magnetizations, were compared with the VGPs calculated from the site means of a high-temperature magnetization isolated from baked sedimentary rocks in the Culpeper basin and to the magnetizations reported by Raymond (1982) from dikes and sills. In this comparison the in situ Culpeper poles agreed with the prefolding Newark poles significantly better than the prefolding Culpeper poles. This result indicates that Culpeper intrusives erupted into already tilted sedimentary rocks. The paleomagnetic pole determined from the combined Culpeper baked sediments, dikes, and sills (in situ coordinates) and the Newark basin baked sediments (tilt-corrected coordinates) lies at 60°N, 69°E and is of 201 Ma age. This latest Triassic/earliest Jurassic pole, when combined with the Newark basin Carnian results (Witte and Kent, 1989) and Norian results (Witte et al., 1991) corrected for a counterclockwise block rotation (Kodama et al., 1994), provides a record of significant polar wander from eastern North America's Mesozoic basins for the Late Triassic. This is consistent with observations made for a similar time period from rocks on the Colorado Plateau (Bazard and Butler, 1991). Comparison of the Newark/Culpeper pole to similar age poles from the Kayenta (Bazard and Butler, 1991) and Moenave Formations (Ekstrand and Butler, 1989) only requires small amounts (5°) of Colorado Plateau rotation. The pole also provides the first well-dated evidence of the Jl cusp in North American apparent polar wander from rocks not located on the Colorado Plateau, thus giving strong support for the usefulness of paleomagnetic Euler pole analysis of apparent polar wander.

Influence of rock composition on the geochemistry of stream and spring waters from mountainous watersheds in the Gunnison, Uncompahgre, and Grand Mesa National Forests, Colorado

USGS Publications Warehouse

Miller, William Roger

2002-01-01

The ranges of geochemical baselines for stream and spring waters were determined and maps were constructed showing acid-neutralizing capacity and potential release of total dissolved solids for streams and spring waters for watersheds underlain by each of ten different rock composition types in the Gunnison, Uncompahgre, and Grand Mesa National Forests, Colorado (GMUG). Water samples were collected in mountainous headwater watersheds that have comparatively high precipitation and low evapotranspiration rates and that generally lack extensive ground-water reservoirs. Mountainous headwaters react quickly to changes in input of water from rain and melting snow and they are vulnerable to anthropogenic impact. Processes responsible for the control and mobility of elements in the watersheds were investigated. The geochemistry of water from the sampled watersheds in the GMUG, which are underlain by rocks that are relatively unmineralized, is compared to the geochemistry of water from the mineralized Redcloud Peak area. The water with the highest potential for release of total dissolved solids is from watersheds that are underlain by Paleozoic sedimentary rocks; that high potential is caused primarily by gypsum in those rocks. Water that has the highest acid-neutralizing capacity is from watersheds that are underlain by Paleozoic sedimentary rocks. The water from watersheds underlain by the Mancos Shale has the next highest acid-neutralizing capacity. Water that has the lowest acid-neutralizing capacity is from watersheds that are underlain by Tertiary ash-flow tuff. Tertiary sedimentary rocks containing oil shale, the Mesavede Formation containing coal, and the Mancos Shale all contain pyrite with elevated metal contents. In these mountainous head-water areas, water from watersheds underlain by these rock types is only slightly impacted by oxidation of pyrite, and over-all it is of good chemical quality. These geochemical baselines demonstrate the importance of rock composition in determining the types of waters that are in the headwater areas. The comparison of these geochemical baselines to later geochemical base-lines will allow recognition of any significant changes in water quality that may occur in the future.

Inventory of Shale Formations in the US, Including Geologic, Hydrological, and Mechanical Characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobson, Patrick; Houseworth, James

2013-11-22

The objective of this report is to build upon previous compilations of shale formations within many of the major sedimentary basins in the US by developing GIS data delineating isopach and structural depth maps for many of these units. These data are being incorporated into the LANL digital GIS database being developed for determining host rock distribution and depth/thickness parameters consistent with repository design. Methods were developed to assess hydrological and geomechanical properties and conditions for shale formations based on sonic velocity measurements.

Passive margins: U.S. Geological Survey Line 19 across the Georges Bank basin

USGS Publications Warehouse

Klitgord, Kim D.; Schlee, John S.; Grow, John A.; Bally, A.W.

1987-01-01

Georges Bank is a shallow part of the Atlantic continental shelf southeast of New England (Emery and Uchupi, 1972, 1984). This bank, however, is merely the upper surface of several sedimentary basins overlying a block-faulted basement of igneous and metamorphic crystalline rock. Sedimentary rock forms a seaward-thickening cover that has accumulated in one main depocenter and several ancillary depressions, adjacent to shallow basement platforms of paleozoic and older crystalline rock. Georges Bank basin contains a thickness of sedimentary rock greater than 10 km, whereas the basement platforms that flank the basin are areas of thin sediment accumulation (less than 5 km).

Sedimentary petrography of the Early Proterozoic Pretoria Group, Transvaal Sequence, South Africa: implications for tectonic setting

NASA Astrophysics Data System (ADS)

Schreiber, U. M.; Eriksson, P. G.; van der Neut, M.; Snyman, C. P.

1992-11-01

Sandstone petrography, geochemistry and petrotectonic assemblages of the predominantly clastic sedimentary rocks of the Early Proterozoic Pretoria Group, Transvaal Sequence, point to relatively stable cratonic conditions at the beginning of sedimentation, interrupted by minor rifting events. Basement uplift and a second period of rifting occurred towards the end of Pretoria Group deposition, which was followed by the intrusion of mafic sill swarms and the emplacement of the Bushveld Complex in the Kaapvaal Craton at about 2050 Ma, the latter indicating increased extensional tectonism, and incipient continental rifting. An overall intracratonic lacustrine tectonic setting for the Pretoria Group is supported by periods of subaerial volcanic activity and palaeosol formation, rapid sedimentary facies changes, significant arkosic sandstones, the presence of non-glacial varves and a highly variable mudrock geochemistry.

Genesis of sediment-hosted stratiform copper cobalt deposits, central African Copperbelt

NASA Astrophysics Data System (ADS)

Cailteux, J. L. H.; Kampunzu, A. B.; Lerouge, C.; Kaputo, A. K.; Milesi, J. P.

2005-07-01

The Neoproterozoic central African Copperbelt is one of the greatest sediment-hosted stratiform Cu-Co provinces in the world, totalling 140 Mt copper and 6 Mt cobalt and including several world-class deposits (⩾10 Mt copper). The origin of Cu-Co mineralisation in this province remains speculative, with the debate centred around syngenetic-diagenetic and hydrothermal-diagenetic hypotheses. The regional distribution of metals indicates that most of the cobalt-rich copper deposits are hosted in dolomites and dolomitic shales forming allochthonous units exposed in Congo and known as Congolese facies of the Katangan sedimentary succession (average Co:Cu = 1:13). The highest Co:Cu ratio (up to 3:1) occurs in ore deposits located along the southern structural block of the Lufilian Arc. The predominantly siliciclastic Zambian facies, exposed in Zambia and in SE Congo, forms para-autochthonous sedimentary units hosting ore deposits characterized by lower a Co:Cu ratio (average 1:57). Transitional lithofacies in Zambia (e.g. Baluba, Mindola) and in Congo (e.g. Lubembe) indicate a gradual transition in the Katangan basin during the deposition of laterally correlative clastic and carbonate sedimentary rocks exposed in Zambia and in Congo, and are marked by Co:Cu ratios in the range 1:15. The main Cu-Co orebodies occur at the base of the Mines/Musoshi Subgroup, which is characterized by evaporitic intertidal-supratidal sedimentary rocks. All additional lenticular orebodies known in the upper part of the Mines/Musoshi Subgroup are hosted in similar sedimentary rocks, suggesting highly favourable conditions for the ore genesis in particular sedimentary environments. Pre-lithification sedimentary structures affecting disseminated sulphides indicate that metals were deposited before compaction and consolidation of the host sediment. The ore parageneses indicate several generations of sulphides marking syngenetic, early diagenetic and late diagenetic processes. Sulphur isotopic data on sulphides suggest the derivation of sulphur essentially from the bacterial reduction of seawater sulphates. The mineralizing brines were generated from sea water in sabkhas or hypersaline lagoons during the deposition of the host rocks. Changes of Eh-pH and salinity probably were critical for concentrating copper-cobalt and nickel mineralisation. Compressional tectonic and related metamorphic processes and supergene enrichment have played variable roles in the remobilisation and upgrading of the primary mineralisation. There is no evidence to support models assuming that metals originated from: (1) Katangan igneous rocks and related hydrothermal processes or; (2) leaching of red beds underlying the orebodies. The metal sources are pre-Katangan continental rocks, especially the Palaeoproterozoic low-grade porphyry copper deposits known in the Bangweulu block and subsidiary Cu-Co-Ni deposits/occurrences in the Archaean rocks of the Zimbabwe craton. These two sources contain low grade ore deposits portraying the peculiar metal association (Cu, Co, Ni, U, Cr, Au, Ag, PGE) recorded in the Katangan sediment-hosted ore deposits. Metals were transported into the basin dissolved in water. The stratiform deposits of Congo and Zambia display features indicating that syngenetic and early diagenetic processes controlled the formation of the Neoproterozoic Copperbelt of central Africa.

The Lusi eruption and implications for understanding fossil piercement structures in sedimentary basins

NASA Astrophysics Data System (ADS)

Svensen, Henrik; Mazzini, Adriano; Planke, Sverre; Hadi, Soffian

2016-04-01

The Lusi eruption started in northeast Java, Indonesia, on May 29th 2006, and it has been erupting rocks, mud, water, and gas ever since. We have been doing field work and research on Lusi ever since the eruption commenced. This work was initially motivated from studying the initiation of a mud volcano. However, the longevity of the eruption has made it possible to describe and monitor the lifespan of this unique piercement structure. . One of the first-order questions regarding the eruption is how it should be classified and if there are any other modern or fossil analogues that can place Lusi in a relevant geological context. During the initial stages of eruption, Lusi was classified as a mud volcano, but following geochemical studies the eruption did not show the typical CH4-dominated gas composition of other mud volcanoes and the temperature was also too high. Moreover, mud volcano eruptions normally last a few days, but Lusi never stopped during the past decade. In particular, the crater fluid geochemistry suggests a connection to the neighboring volcanic complex. Lusi represent a sedimentary hosted hydrothermal system. This opens up new possibilities for understanding fossil hydrothermal systems in sedimentary basins, such as hydrothermal vent complexes and breccia-pipes found in sedimentary basins affected by the formation of Large igneous provinces. We will present examples from the Karoo Basin (South Africa) and the Vøring Basin (offshore Norway) and discuss how Lusi can be used to refine existing formation models. Finally, by comparing Lusi to fossil hydrothermal systems we may get insight into the processes operating at depth where the Lusi system interacts with the igneous rocks of the neighbouring volcanic arc.

Lithofacies control in detrital zircon provenance studies: Insights from the Cretaceous Methow basin, southern Canadian Cordillera

USGS Publications Warehouse

DeGraaff-Surpless, K.; Mahoney, J.B.; Wooden, J.L.; McWilliams, M.O.

2003-01-01

High-frequency sampling for detrital zircon analysis can provide a detailed record of fine-scale basin evolution by revealing the temporal and spatial variability of detrital zircon ages within clastic sedimentary successions. This investigation employed detailed sampling of two sedimentary successions in the Methow/Methow-Tyaughton basin of the southern Canadian Cordillera to characterize the heterogeneity of detrital zircon signatures within single lithofacies and assess the applicability of detrital zircon analysis in distinguishing fine-scale provenance changes not apparent in lithologic analysis of the strata. The Methow/Methow-Tyaughton basin contains two distinct stratigraphic sequences of middle Albian to Santonian clastic sedimentary rocks: submarine-fan deposits of the Harts Pass Formation/Jackass Mountain Group and fluvial deposits of the Winthrop Formation. Although both stratigraphic sequences displayed consistent ranges in detrital zircon ages on a broad scale, detailed sampling within each succession revealed heterogeneity in the detrital zircon age distributions that was systematic and predictable in the turbidite succession but unpredictable in the fluvial succession. These results suggest that a high-density sampling approach permits interpretation of finescale changes within a lithologically uniform turbiditic sedimentary succession, but heterogeneity within fluvial systems may be too large and unpredictable to permit accurate fine-scale characterization of the evolution of source regions. The robust composite detrital zircon age signature developed for these two successions permits comparison of the Methow/Methow-Tyaughton basin age signature with known plutonic source-rock ages from major plutonic belts throughout the Cretaceous North American margin. The Methow/Methow-Tyaughton basin detrital zircon age signature matches best with source regions in the southern Canadian Cordillera, requiring that the basin developed in close proximity to the southern Canadian Cordillera and providing evidence against large-scale dextral translation of the Methow terrane.

Unsaturated hydraulic properties of porous sedimentary rocks explained by mercury porosimetry

NASA Astrophysics Data System (ADS)

Clementina Caputo, Maria; Turturro, Celeste; Gerke, Horst H.

2016-04-01

The understanding of hydraulic properties is essential in the modeling of flow and solute transport including contaminants through the vadose zone, which consists of the soil as well as of the underlying porous sediments or rocks. The aim of this work is to study the relationships between unsaturated hydraulic properties of porous rocks and their pore size distribution. For this purpose, two different lithotypes belonging to Calcarenite di Gravina Formation, a Plio-Pleistocene sedimentary rock of marine origin, were investigated. The two lithotypes differ mainly in texture and came from two distinct quarry districts, Canosa di Puglia (C) and Massafra (M) in southern Italy, respectively. This relatively porous rock formation (porosities range between 43% for C and 41% for M) often constitutes a thick layer of vadose zone in several places of Mediterranean basin. The water retention curves (WRCs) and the unsaturated hydraulic conductivity functions were determined using four different experimental methods that cover the full range from low to high water contents: the WP4 psychrometer test, the Wind's evaporation method, the Stackman's method and the Quasi-steady centrifuge method. Pore size estimation by means of mercury intrusion porosimetry (MIP) was performed. WRCs were compared with the pore size distributions to understand the influence of fabric, in terms of texture and porosity, features of pores and pore size distribution on the hydraulic behavior of rocks. The preliminary results show that the pore size distributions obtained by MIP do not cover the entire pore size range of the investigated Calcarenite. In fact, some pores in the rock samples of both lithotypes were larger than the maximum size that could be investigated by MIP. This implies that for explaining the unsaturated hydraulic properties over the full moisture range MIP results need to be combined with results obtained by other methods such as image analysis and SEM.

Reconnaissance geologic map of the Loreto and part of the San Janier quadrangles, Baja California Sur, Mexico

USGS Publications Warehouse

McLean, Hugh

1988-01-01

The Loreto area of Baja California Sur, Mexico, contains a diverse association of igneous, sedimentary, and metasedimentary rocks exposed in the foothills and arroyos between the Sierra La Giganta and Gulf of California. The Loreto area was selected for this study to examine the possible relation of the marine rocks to the opening of the Gulf of California, and to determine the stratigraphic and structural relations between basement rocks composed of granitic and prebatholithic rocks and overlying Tertiary (mainly Miocene) sedimentary and volcanic rocks, and by a sequence of Pliocene marine and nonmarine sedimentary rocks. The Pliocene marine rocks lie in a structural depression informally called here, the Loreto embayment. This geologic map and report stem from a cooperative agreement between the U.S. Geological Survey and the Consejo de Recursos Minerales of Mexico that was initiated in 1982.

Age and geochemistry of the Charlestown Group, Ireland: Implications for the Grampian orogeny, its mineral potential and the Ordovician timescale

NASA Astrophysics Data System (ADS)

Herrington, Richard J.; Hollis, Steven P.; Cooper, Mark R.; Stobbs, Iain; Tapster, Simon; Rushton, Adrian; McConnell, Brian; Jeffries, Teresa

2018-03-01

Accurately reconstructing the growth of continental margins during episodes of ocean closure has important implications for understanding the formation, preservation and location of mineral deposits in ancient orogens. The Charlestown Group of county Mayo, Ireland, forms an important yet understudied link in the Caledonian-Appalachian orogenic belt located between the well documented sectors of western Ireland and Northern Ireland. We have reassessed its role in the Ordovician Grampian orogeny, based on new fieldwork, high-resolution airborne geophysics, graptolite biostratigraphy, U-Pb zircon dating, whole rock geochemistry, and an examination of historic drillcore from across the volcanic inlier. The Charlestown Group can be divided into three formations: Horan, Carracastle, and Tawnyinah. The Horan Formation comprises a mixed sequence of tholeiitic to calc-alkaline basalt, crystal tuff and sedimentary rocks (e.g. black shale, chert), forming within an evolving peri-Laurentian affinity island arc. The presence of graptolites Pseudisograptus of the manubriatus group and the discovery of Exigraptus uniformis and Skiagraptus gnomonicus favour a latest Dapingian (i.e. Yapeenian Ya 2/late Arenig) age for the Horan Formation (equivalent to c. 471.2-470.5 Ma according to the timescale of Sadler et al., 2009). Together with three new U-Pb zircon ages of 471.95-470.82 Ma from enclosing felsic tuffs and volcanic breccias, this fauna provides an important new constraint for calibrating the Middle Ordovician timescale. Overlying deposits of the Carracastle and Tawnyinah formations are dominated by LILE- and LREE-enriched calc-alkaline andesitic tuffs and flows, coarse volcanic breccias and quartz-feldspar porphyritic intrusive rocks, overlain by more silicic tuffs and volcanic breccias with rare occurrences of sedimentary rocks. The relatively young age for the Charlestown Group in the Grampian orogeny, coupled with high Th/Yb and zircon inheritance (c. 2.7 Ga) in intrusive rocks indicate that the arc was founded upon continental crust (either composite Laurentian margin or microcontinental block). Regional correlation is best fitted to an association with the post-subduction flip volcanic/intrusive rocks of the Irish Caledonides, specifically the late-stage development of the Tyrone Igneous Complex, intrusive rocks of Connemara (western Ireland) and the Slishwood Division (Co. Sligo). Examination of breccia textures and mineralization across the volcanic inlier questions the previous porphyry hypothesis for the genesis of the Charlestown Cu deposit, which are more consistent with a volcanogenic massive sulfide (VMS) deposit.

Geology, structure and age of the Nahuel Niyeu Formation in the Aguada Cecilio area, North Patagonian Massif, Argentina

NASA Astrophysics Data System (ADS)

Greco, Gerson A.; González, Pablo D.; González, Santiago N.; Sato, Ana M.; Basei, Miguel A. S.; Tassinari, Colombo C. G.; Sato, Kei; Varela, Ricardo; Llambías, Eduardo J.

2015-10-01

The low-grade Nahuel Niyeu Formation in the Aguada Cecilio area (40°50‧S-65°53‧W) shows ultramafic to felsic metaigneous rocks forming a sill swarm intercalated in the metasedimentary sequence and a polyphase deformation which permit an integrated study of the magmatic and tectonometamorphic evolution of this geological unit. In this paper we present a geological characterization of the Nahuel Niyeu Formation in the Aguada Cecilio area combining mapping, structural and metamorphic analysis with a SHRIMP U-Pb age and geochemical data from the metaigneous rocks. The metasedimentary sequence consists of alternating metagreywackes and phyllites, and minor metasandstones and granule metaconglomerates. The sills are pre-kinematic intrusions and yielded one SHRIMP U-Pb, zircon crystallization age of 513.6 ± 3.3 Ma. Their injection occurred after consolidation of the sedimentary sequence. A syn-sedimentary volcanic activity is interpreted by a metaandesite lava flow interlayered in the metasedimentary sequence. Sedimentary and igneous protoliths of the Nahuel Niyeu Formation would have been formed in a continental margin basin associated with active magmatic arc during the Cambrian Epoch 2. Two main low-grade tectonometamorphic events affected the Nahuel Niyeu Formation, one during the Cambrian Epoch 2-Early Ordovician and the other probably in the late Permian at ˜260 Ma. Local late folds could belong to the final stages of the late Permian deformation or be even younger. In a regional context, the Nahuel Niyeu and El Jagüelito formations and Mina Gonzalito Complex show a comparable Cambrian-Ordovician evolution related to the Terra Australis Orogen in the south Gondwana margin. This evolution is also coeval with the late and early stages of the Pampean and Famatinian orogenies of Central Argentina, respectively. The late Permian event recorded in the Nahuel Niyeu Formation in Aguada Cecilio area is identified by comparable structures affecting the Mina Gonzalito Complex and El Jagüelito Formation and resetting ages from granitoids. This event represents the Gondwanide Orogeny within the same Terra Australis Orogen.

Potential Cement Phases in Sedimentary Rocks Drilled by Curiosity at Gale Crater, Mars

NASA Technical Reports Server (NTRS)

Rampe, E. B.; Morris, R. V.; Bish, D. L.; Chipera, S. J.; Ming, D. W.; Blake, D. F.; Vaniman, D. T.; Bristow, T. F.; Cavanagh, P.; Farmer, J. D.;

Geology of the Lake Mary quadrangle, Iron County, Michigan

USGS Publications Warehouse

Bayley, Richard W.

1959-01-01

The Lake Mary quadrangle is in eastern Iron County, in the west part of the Upper Peninsula of Michigan. The quadrangle is underlain by Lower and Middle Precambrian rocks, formerly designated Archean and Algonkian rocks, and is extensively covered by Pleistocene glacial deposits. A few Upper Precambrian (Keweenawan) diabase dikes and two remnants of sandstone and dolomite of early Paleozoic age are also found in the area. The major structural feature is the Holmes Lake anticline, the axis of which strikes northwest through the northeast part of the quadrangle. Most of the quadrangle, therefore, is underlain by rock of the west limb of the anticline. To the northwest along the fold axis, the Holmes Lake anticline is separated from the Amasa oval by a saddle of transverse folds in the vicinity of Michigamme Mountain in the Kiernan quadrangle. The Lower Precambrian rocks are represented by the Dickinson group and by porphyritic red granite whose relation to the Dickinson group is uncertain, but which may be older. The rocks of the Dickinson group are chiefly green to black metavolcanic schist and red felsite, some of the latter metarhyolite. The dark schist is commonly magnetic. The Dickinson group underlies the core area of the Holmes Lake anticline, which is flanked by steeply dipping Middle Precambrian formations of the Animikie series. A major unconformity separates the Lower Precambrian rocks from the overlying Middle Precambrian rocks. In ascending order the formations of the Middle Precambrian are the Randville dolomite, the Hemlock formation, which includes the Mansfield iron-bearing slate member, and the Michigamme slate. An unconformity occurs between the Hemlock formation and Michigamme slate. The post-Hemlock unconformity is thought to be represented in the Lake Mary quadrangle by the absence of iron-formation of the Amasa formation, which is known to lie between the Hemlock and the Michigamme to the northwest of the Lake Mary quadrangle in the Crystal Falls quadrangle. Post-Hemlock erosion may account also for the absence of iron-formation of the Fence River formation on the east limb of the Holmes Lake anticline within the Lake Mary quadrangle. The Randville dolomite is not exposed and is known only from diamond drilling in the northeast part of the area where it occurs in the east and west limbs of the Holmes Lake anticline. The formation has a maximum thickness of about 2,100 feet; this includes a lower arkosic phase, some of which is quartz pebble conglomerate, a medial dolomitic phase, and an upper slate phase. The triad is gradational. Included within the formation are a few beds of chloritic schist thought to be of volcanic origin. An unconformity between the Randville and the succeeding Hemlock is not indicated in the quadrangle, but is probably present. The Hemlock formation is best exposed in the northwest and south-central parts of the area. The apparent thickness of the formation is 10,000- 17,000 feet. It is composed mainly of mafic metavolcanic rocks and intercalated slate and iron-formation. In the north part of the quadrangle the volcanic rocks are greenstone, which includes altered basaltic flow rocks, volcanic breccia, tuff, and slate. Pillow structures are common in the metabasalt. It is not certain if any Hemlock rocks are present in the east limb of the Holmes Lake anticline. In the south part of the quadrangle, the rocks of the Hemlock are chiefly chlorite and hornblende schist and hornfels. Pyroxene hornfels is sparingly present. At least two sedimentary slate belts are included in the Hemlock formation. One of these, the Mansfield iron-bearing slate member, includes in its upper part an altered chert-siderite iron-formation 30 to over 150 feet thick from which iron ore has been mined at the Mansfield location. The position of the iron-bearing rocks has been determined magnetically, and past explorations for iron ore are discussed. Though probably; unconformable, the contact between the Hemlock and the Michigamme formations appears conformable. The Michigamme slate consists of at least 4,000 feet of interbedded mica schist and granulite, the altered equivalents of the slate and graywacke characteristic of the Michigamme in adjacent areas. The Michigamme rocks are best exposed in the south part of the quadrangle in the vicinity of Peavy Pond. Two periods of regional metamorphism have resulted in the alteration of almost all of the rocks of the quadrangle. The Lower Precambrian rocks underwent at least one period of metamorphism, uplift, and erosion before the deposition of the Randville dolomite. After the deposition of the Michigamme slate, a post-Middle Precambrian period of regional metamorphism occurred with attending deformation and igneous intrusion. The grade of metamorphism rises toward the south in the area. The rocks in the northern two-thirds of the quadrangle are representative of greenschist facies of regional metamorphism, whereas the rocks in the southern onethird of the quadrangle are representative of the albite-epidote-amphibolite, the amphibolite, and the pyroxene hornfels facies, the metamorphic node centering about the intrusive Peavy Pond complex in the Peavy Pond area. The Precambrian sedimentary and volcanic rocks are cut by intrusive igneous rocks of different types and several different ages. Gabbroic sills and dikes invaded the Hemlock rocks at some time after the Hemlock was deposited and before the post-Middle Precambrian orogeny and metamorphism. Some contact metamorphism attended the intrusion of the major sills. One of the sills, the West Kiernan sill, is well differentiated. A syntectonic igneous body, composed of gabbro and minor ultramafic parts and fringed with intermediate and felsic differentiates and hybrids, the Peavy; Pond complex, was intruded into the Hemlock and Michigamme formations during the post-Middle Precambrian orogeny. The complex is situated in the Peavy Pond area at the crest of the regional metamorphic node. Contact-altered sedimentary and volcanic rocks margin the complex. The effects of regional metamorphism have been superposed on the contact metamorphic rocks peripheral to the complex and on the igneous rocks of the complex as well. The mafic augite-bearing rocks of the complex emplaced early in the orogeny were deformed by granulation at the peak of the deformation and subsequently metamorphosed to hornblende rocks. Some of the intermediate and felsic rocks of the complex were foliated by the deformation, while the more fluid, felsic parts of the complex were intruded under orogenic stress and crystallized after the peak of deformation. The deformation culminated in major faulting during which the formations were dislocated, and some of the granite of the complex was extremely brecciated. A few diabase dikes, probably of Keweenawan age, have intruded the deformed and altered Animikie rocks. The only known metallic resource is iron ore. The Mansfield mine produced 1¥2 million tons of high-grade iron ore between the years 1890 and 1913. Sporadic exploration since 1913 has failed to reveal other ore deposits of economic importance.

Campanian-Maastrichtian phosphorites of Iraq

NASA Astrophysics Data System (ADS)

Al-Bassam, K. S.; Al-Dahan, A. A.; Jamil, A. K.

1983-08-01

Bedded marine sedimentary phosphate rocks of Campanian-Maastrichtian age are exposed in the Western Desert of Iraq, forming part of the Tethyan phosphate province. The studied phosphorites are found in three horizons within carbonate rocks; they are mostly pelletal in texture, associated with bone fragments and detrital quartz grains, and cemented by calcite or chert. The mineralogy of the phosphate is dominated by carbonate-fluorapatite. The phosphate and the associated carbonate rocks are relatively enriched with Cr, Ni, Cu, Zn, V, and organic matter. The apatite is enriched with isotopically light carbon and heavy sulfur. The mode of phosphorite formation seems to have included syngenetic deposition of phosphate under reducing, slightly alkaline conditions in shallow marine environment. Decomposition of organic phosphatic remnants appear to have been the local source of phosphorus enrichment. However, the major tectonic and paleogeographic development of the Tethys Sea during Upper Cretaceous have probably played an important role in providing suitable setting for large scale formation of phosphorite.

Geochemical Aspects of Formation of Large Oil Deposits in the Volga-Ural Sedimentary Basin

NASA Astrophysics Data System (ADS)

Plotnikova, I.; Nosova, F.; Pronin, N.; Nosova, J.; Budkevich, T.

2012-04-01

The study of the rocks domanikoid type in the territory of the Ural-Volga region has an almost century-long history, beginning with the first studies of A.D. Archangelsky in the late 20's of last century. But nevertheless the question of the source of oil that formed the industrial deposits of Volga-Ural oil and gas province (OGP), where Romashkinskoye oil field occupies a special place, remains unresolved and topical. According to the sedimentary-migration theory of origin of oil and gas, it is supposed that the primary source of hydrocarbons in this area are the deposits of domanikoid type that contain a large ammount of sapropel organic matter (OM). Semiluki (domanik) horizon of srednefranski substage of the Upper Devonian is considered to be a typical domanikoid stratum. Investigation of the OM of the rocks and oils of the sedimentary cover on the basis of chromato-mass spectrometry method allows us to study the correlations between rock and oil and to assess the location (or absence) of the sources of hydrocarbons in the Paleozoic sedimentary cover. The results of geochemical study of dispersed organic matter (DOM) of rocks from Semiluksky horizon of the Upper Devonian and of the oil from Pashiysky horizon of the Middle Devonian form the basis of this paper. The objectives of this study were the following: to determine the original organic matter of the rocks, which would indicate the conditions of sedimentation of the supposed rock-oil sources; the study of chemofossils (biomarkers) in oil from Pashiyskiy horizon; and the identification of genetic association of DOM rocks from Semiluksky horizon with this oil on the basis of the oil-DOM correlation. The study of biomarkers was carried out with the help of chromato-mass spectrometry in the Laboratory of Geochemistry of Fossil Fuels (Kazan Federal University). In this study we used several informative parameters characterizing the depositional environment, the type of source OM and its maturity: STER / PENT, hC35/hC34, GAM / HOP, S27/S28/S29 (steranes), DIA / REG, Ts / Tm, MOR / HOP, NOR / HOP, TET / TRI, C29SSR, C29BBAA, C31HSR, S30STER, TRI / PENT, TRI / HOP. Comparison in the rock-oil system was performed primarily according to the parameters indicating the depositional environment of the source rock that contains syngenetic DOM - according to the coefficients that determine lithological conditions for the formation of the supposed oil-source bed strata (DIA / REG, Ts / Tm, NOR / HOP, TRI / HOP and STER / PENT). Biomarker ratios indicate a different type of sedimentation basins. Sediments, which accumulated DOM from Semilukskiy horizon, can be characterized by low clay content, or its absence, that is consistent with the carbonate type of cut of the horizon. The bacterial material that was accumulated under reducing conditions of sedimentation appeared to be the source of syngenetic OM. Chemofossils found in oils from Pashiyskiy horizon are typical of sedimentary strata that contain clay - for clastic rocks, which in the study area are mainly represented by deposits and Eyfel Givetian layers of the Middle Devonian and lowfransk substage of the Upper Devonian. The study of correlations obtained for the different coefficients of OM and oils showed that only the relationships between Ts/Tm and DIA/REG and between NOR/HOP and TRI/HOP are characteristic of close, almost similar values of correlation both for the dispersed organic matter and for oil. In all other cases, the character of the correlation of OM is significantly different from that of oil. The differences in values and ranges of biomarker ratios as well as the character of their correlation indicates the absence of genetic connection between the oil from Pashiyskiy horizon for the dispersed organic matter from Semilukskiy horizon. This conclusion is based on the study of five biomarker parameters (DIA/REG, Ts/Tm, NOR/HOP, TRI/HOP and STER/PENT). The research results described in the article clearly indicate the need for further studies of geochemical features of the organic matter of the Paleozoic mantle rocks and the underlying sedimentary and crystalline complexes of Precambrian.

Petrography and geochemistry of Cenozoic sedimentary sequences of the southern Samar Island, Philippines: Clues to the unroofing history of an ancient subduction zone

NASA Astrophysics Data System (ADS)

Pacle, Nichole Anthony D.; Dimalanta, Carla B.; Ramos, Noelynna T.; Payot, Betchaida D.; Faustino-Eslava, Decibel V.; Queaño, Karlo L.; Yumul, Graciano P.

2017-07-01

The Cenozoic sedimentary sequences of southern Samar Island in eastern Philippines were examined to understand the unroofing history of an ancient arc terrane. Petrographic and geochemical data revealed varying degrees of inputs from the ophiolite basement and differences in modal compositions. The sedimentary units are mostly made up of lithic fragments. The Late Oligocene to Early Miocene Daram Formation contains more chert and volcanic fragments whereas the late Middle Miocene to Early Pliocene Catbalogan Formation is dominantly composed of ultramafic components. These variances are correspondingly reflected in the geochemical signatures of these two sedimentary formations. The Catbalogan Formation clastic rocks have higher volatile-free MgO and Fe2O3 values (average: 8.4% for both oxides) compared to the Daram Formation samples (average: 5.1 and 6.3%, respectively). Geochemical variations are also reflected in the Co, Cr and Ni values: the Catbalogan Formation samples reflect higher concentrations (Co: 15-57 ppm; Cr: 231-1094 ppm; Ni: 84-484 ppm) compared to the Daram Formation samples (Co: 24-32 ppm; Cr: 234-418 ppm; Ni: 212-323 ppm). These observations suggest that the Daram Formation eroded and transported more of the crustal portions of the ophiolite, while the younger Catbalogan Formation represents a later exhumation and subsequent erosion of the ultramafic section. An oceanic island arc (OIA) setting is proposed for the two formations based on several tectonic discrimination diagrams (e.g., Th-La-Sc, La vs. Th). The OIA signature is further supported by their smooth chondrite-normalized rare earth element (REE) patterns with no obvious Eu anomaly as well as LREE enrichment which are typical of sediments deposited in OIA setting. Based on the dominantly ophiolitic provenance of the Daram and Catbalogan formations, the post-emplacement history of the nearby Samar Ophiolite is constrained during the Late Oligocene to Early Pliocene period.

Geology, Geochemistry and Geophysics of Sedimentary Rock-Hosted Au Deposits in P.R. China

USGS Publications Warehouse

Peters, Stephen G.

2002-01-01

This is the second report concerning results of a joint project between the U.S. Geological Survey and the Tianjin Geological Academy to study sedimentary rock-hosted Au deposits in P.R. China. Since the 1980s, Chinese geologists have devoted a large-scale exploration and research effort to the deposits. As a result, there are more than 20 million oz of proven Au reserves in sedimentary rock-hosted Au deposits in P.R. China. Additional estimated and inferred resources are present in over 160 deposits and occurrences, which are undergoing exploration. This makes China second to Nevada in contained ounces of Au in Carlin-type deposits. It is likely that many of the Carlin-type Au ore districts in China, when fully developed, could have resource potential comparable to the multi-1,000-tonne Au resource in northern Nevada. The six chapters of this report describe sedimentary rock-hosted Au deposits that were visited during the project. Chapters 1 and 2 provide an overview of sedimentary rock-hosted Au deposits and Carlin-type Au deposits and also provide a working classification for the sedimentary rock-hosted Au deposits. Chapters 3, 4, and 5 provide descriptions that were compiled from the literature in China in three main areas: the Dian-Qian-Gui, the Qinling fold belt, and Middle-Lower Yangtze River areas. Chapter 6 contains a weights-of-evidence (WofE), GIS-based mineral assessment of sedimentary rock-hosted Au deposits in the Qinling fold belt and Dian-Qian-Gui areas. Appendices contain scanned aeromagnetic (Appendix I) and gravity (Appendix II) geophysical maps of south and central China. Data tables of the deposits (Appendix III) also are available in the first report as an interactive database at http://geopubs.wr.usgs.gov/open-file/of98-466/. Geochemical analysis of ore samples from the deposits visited are contained in Appendix IV.

Geology of the Greenwater Range, and the dawn of Death Valley, California—Field guide for the Death Valley Natural History Conference, 2013

USGS Publications Warehouse

Calzia, J.P.; Rämö, O.T.; Jachens, Robert; Smith, Eugene; Knott, Jeffrey

2016-05-02

Much has been written about the age and formation of Death Valley, but that is one—if not the last—chapter in the fascinating geologic history of this area. Igneous and sedimentary rocks in the Greenwater Range, one mountain range east of Death Valley, tell an earlier story that overlaps with the formation of Death Valley proper. This early story has been told by scientists who have studied these rocks for many years and continue to do so. This field guide was prepared for the first Death Valley Natural History Conference and provides an overview of the geology of the Greenwater Range and the early history (10–0 Ma) of Death Valley.

Contributions to the geology of uranium and thorium by the United States Geological Survey and Atomic Energy Commission for the United Nations International Conference on Peaceful Uses of Atomic Energy, Geneva, Switzerland, 1955

USGS Publications Warehouse

Page, Lincoln R.; Stocking, Hobart E.; Smith, Harriet B.

1956-01-01

Within the boundaries of the United States abnormal amounts of uranium have been found in rocks of nearly all geologic ages and lithologic types. Distribution of ore is more restricted. On the Colorado Plateau, the Morrison formation of Jurassic age yields 61.4 percent of the ore produced in the United States, and the Chinle conglomerate and Shinarump formation of Triassic age contribute 26.0 and 5.8 percent, respectively. Clastic, carbonaceous, and carbonate sedimentary rocks of Tertiary, Mesozoic, and Paleozoic ages and veins of Tertiary age are the source of the remaining 6.8 percent.

Geologic hazards in the region of the Hurricane fault

USGS Publications Warehouse

Lund, W.R.

1997-01-01

Complex geology and variable topography along the 250-kilometer-long Hurricane fault in northwestern Arizona and southwestern Utah combine to create natural conditions that can present a potential danger to life and property. Geologic hazards are of particular concern in southwestern Utah, where the St. George Basin and Interstate-15 corridor north to Cedar City are one of Utah's fastest growing areas. Lying directly west of the Hurricane fault and within the Basin and Range - Colorado Plateau transition zone, this region exhibits geologic characteristics of both physiographic provinces. Long, potentially active, normal-slip faults displace a generally continuous stratigraphic section of mostly east-dipping late Paleozoic to Cretaceous sedimentary rocks unconformably overlain by Tertiary to Holocene sedimentary and igneous rocks and unconsolidated basin-fill deposits. Geologic hazards (exclusive of earthquake hazards) of principal concern in the region include problem soil and rock, landslides, shallow ground water, and flooding. Geologic materials susceptible to volumetric change, collapse, and subsidence in southwestern Utah include; expansive soil and rock, collapse-prone soil, gypsum and gypsiferous soil, soluble carbonate rocks, and soil and rock subject to piping and other ground collapse. Expansive soil and rock are widespread throughout the region. The Petrified Forest Member of the Chinle Formation is especially prone to large volume changes with variations in moisture content. Collapse-prone soils are common in areas of Cedar City underlain by alluvial-fan material derived from the Moenkopi and Chinle Formations in the nearby Hurricane Cliffs. Gypsiferous soil and rock are subject to dissolution which can damage foundations and create sinkholes. The principal formations in the region affected by dissolution of carbonate are the Kaibab and Toroweap Formations; both formations have developed sinkholes where crossed by perennial streams. Soil piping is common in southwestern Utah where it has damaged roads, canal embankments, and water-retention structures. Several unexplained sinkholes near the town of Hurricane possibly are the result of collapse of subsurface volcanic features. Geologic formations associated with slope failures along or near the Hurricane fault include rocks of both Mesozoic and Tertiary age. Numerous landslides are present in these materials along the Hurricane Cliffs, and the Petrified Forest Member of the Chinle Formation is commonly associated with slope failures where it crops out in the St. George Basin. Steep slopes and numerous areas of exposed bedrock make rock fall a hazard in the St. George Basin. Debris flows and debris floods in narrow canyons and on alluvial fans often accompany intense summer cloudburst thunderstorms. Flooded basements and foundation problems associated with shallow ground water are common on benches north of the Santa Clara River in the city of Santa Clara. Stream flooding is the most frequently occurring and destructive geologic hazard in southwestern Utah. Since the 1850s, there have been three major riverine (regional) floods and more than 300 damaging flash floods. Although a variety of flood control measures have been implemented, continued rapid growth in the region is again increasing vulnerability to flood hazards. Site-specific studies to evaluate geologic hazards and identify hazard-reduction measures are recommended prior to construction to reduce the need for costly repair, maintenance, or replacement of improperly placed or protected facilities.

Photogeologic maps of the Iris SE and Doyleville SW quadrangles, Saguache County, Colorado

USGS Publications Warehouse

McQueen, Kathleen

1957-01-01

The Iris SE and Doyleville SW quadrangles, Saguache County, Colorado include part ot the Cochetopa mining district. Photogeologic maps of these quadrangles show the distribution of sedimentary rocks of Jurassic and Cretaceous age; precambrian granite, schist, and gneiss; and igneous rocks of Tertiary age. Sedimentary rocks lie on an essentially flat erosion surface on Precambrian rocks. Folds appear to be absent but faults present an extremely complex structural terrane. Uraniferous deposits occur at fault intersections in Precambriam and Mesozoic rocks.

Petrographic and geochemical characterization of the Triassic and Jurassic magmatic and volcanic rocks of southeastern Ecuador

NASA Astrophysics Data System (ADS)

Villares, Fabián; Eguez, Arturo; Yanez, Ernesto

2014-05-01

Formely, the subandean zone in the southeastern Ecuador involved large volcanic and magmatic rocks included in the Misahualli Formation and Zamora batholith, both as expression of the Jurassic cal-alcaline volcanic arc. The aim of the project carried out by the INIGEMM (Instituto Nacional de Investigación Geológico Minero Metalúrgico) was discriminate the volcanic products including a continuous set going from basalts to ryolithes and volcanoclastic rocks. Geochemical characterization was done using representative 16 whole - rock chemical analysis. The oldest rocks of the investigated area called Pachicutza Unit, include greenish to black, massive basalts and basaltic andesites, locally showing pillows structures. The texture is aphanitic to microporphyritic with slight crystal growth of plagioclase and pyroxenes. The Unit include also local pyroclastic breccias and tuffs showing variable skarnification related to the intrusion of the jurassic Zamora Batholith. Two samples of basalts show tholeiitic affinity, corresponding to an N- MORB, probably representing an early stage in opening of a regional Triassic rift reported since Colombia to Peru in the Andes. These geochemical characteristics are similar to the amphibolites of Monte Olivo Unit in the Real Cordillera. The Jurassic large volcanic assembly of the Misahualli Formation was also differenciated. Basal volcanics include green, subporphyritic andesites and volcanic breccias possibly generated at an early stage of the volcanic arc, caused by a change of extensive to compressive regime. Continental volcano sedimentary and sedimentary rock were discriminate as Nueva Esperanza and Suarez Units, respectively. The volcanosedimentary sequence include massive to laminate tuffs and tuffites of intermediate composition. The sediments of the Suarez Unit include dominant conglomerats and sandstones of fluvial domain. The regional volcanic sequence is completed by the Las Peñas Unit that includes aphanitic to porphyritic andesites and coarse volcanic breccias. Three geochemical analysis of the lavas show andesitic composition, have medium to high-K calc-alkaline and represent the products of a subduction zone. All intrusions in the area were mapped as Zamora Batholith. Nevetheless, the field observations confirm a large Jurassic batholith but also other significant minor intrusion that intrudes the cretaceous sedimentary formations of the area. Thus, magmatic rocks in the area are named as Zamora batholithic complex. Petrography of the Zamora Batholith ranges from tonalite to monzo-granite with the same qualitative mineralogy. Rocks are composed by different proportions of plagioclase, amphibole, K-feldspar, quartz, biotite, opaques and epidote, as accessory minerals has zircon, sphene and apatite. Zamora Granitoids ranged from dioritic to granitic compositions ( 60.09 - . 73.6 wt % SiO2). The Zamora Granitoids have medium to high-K calc-alkaline and represent the products of a subduction zone. Products are generated within a magmatic arc in normal conditions of maturity. The Zamora Granitoids are I - type intrusions.

In search of early life: Carbonate veins in Archean metamorphic rocks as potential hosts of biomarkers

NASA Astrophysics Data System (ADS)

Peters, Carl A.; Piazolo, Sandra; Webb, Gregory E.; Dutkiewicz, Adriana; George, Simon C.

2016-11-01

The detection of early life signatures using hydrocarbon biomarkers in Precambrian rocks struggles with contamination issues, unspecific biomarkers and the lack of suitable sedimentary rocks due to extensive thermal overprints. Importantly, host rocks must not have been exposed to temperatures above 250 °C as at these temperatures biomarkers are destroyed. Here we show that Archean sedimentary rocks from the Jeerinah Formation (2.63 billion yrs) and Carawine Dolomite (2.55 billion yrs) of the Pilbara Craton (Western Australia) drilled by the Agouron Institute in 2012, which previously were suggested to be suitable for biomarker studies, were metamorphosed to the greenschist facies. This is higher than previously reported. Both the mineral assemblages (carbonate, quartz, Fe-chlorite, muscovite, microcline, rutile, and pyrite with absence of illite) and chlorite geothermometry suggest that the rocks were exposed to temperatures higher than 300 °C and probably ∼400 °C, consistent with greenschist-facies metamorphism. This facies leads to the destruction of any biomarkers and explains why the extraction of hydrocarbon biomarkers from pristine drill cores has not been successful. However, we show that the rocks are cut by younger formation-specific carbonate veins containing primary oil-bearing fluid inclusions and solid bitumens. Type 1 veins in the Carawine Dolomite consist of dolomite, quartz and solid bitumen, whereas type 2 veins in the Jeerinah Formation consist of calcite. Within the veins fluid inclusion homogenisation temperatures and calcite twinning geothermometry indicate maximum temperatures of ∼200 °C for type 1 veins and ∼180 °C for type 2 veins. Type 1 veins have typical isotopic values for reprecipitated Archean sea-water carbonates, with δ13CVPDB ranging from - 3 ‰ to 0‰ and δ18OVPDB ranging from - 13 ‰ to - 7 ‰, while type 2 veins have isotopic values that are similar to hydrothermal carbonates, with δ13CVPDB ranging from - 18 ‰ to - 4 ‰ and δ18OVPDB ranging from - 18 ‰ to - 12 ‰. Evidently, the migration and entrapment of hydrocarbons occurred after peak metamorphism under temperatures congruous with late catagenesis and from fluids of different compositions. The relatively high temperatures of vein formation and the known geotectonic history of the rocks analysed suggest a probable minimum age of 1.8 billion yrs (Paleoproterozoic). Our results demonstrate that post peak-metamorphic veins provide an exciting opportunity in the search for evidence of early life. The integration of petrological and organic geochemical techniques is crucial for any future studies that use biomarkers to reconstruct the early biosphere.

Aquifer Characterization and Groundwater Potential Evaluation in Sedimentary Rock Formation

NASA Astrophysics Data System (ADS)

Ashraf, M. A. M.; Yusoh, R.; Sazalil, M. A.; Abidin, M. H. Z.

2018-04-01

This study was conducted to characterize the aquifer and evaluate the ground water potential in the formation of sedimentary rocks. Electrical resistivity and drilling methods were used to develop subsurface soil profile for determining suitable location for tube well construction. The electrical resistivity method was used to infer the subsurface soil layer by use of three types of arrays, namely, the pole–dipole, Wenner, and Schlumberger arrays. The surveys were conducted using ABEM Terrameter LS System, and the results were analyzed using 2D resistivity inversion program (RES2DINV) software. The survey alignments were performed with maximum electrode spreads of 400 and 800 m by employing two different resistivity survey lines at the targeted zone. The images were presented in the form of 2D resistivity profiles to provide a clear view of the distribution of interbedded sandstone, siltstone, and shale as well as the potential groundwater zones. The potential groundwater zones identified from the resistivity results were confirmed using pumping, step drawdown, and recovery tests. The combination among the three arrays and the correlation between the well log and pumping test are reliable and successful in identifying potential favorable zones for obtaining groundwater in the study area.

Comparison of ground-based measurements of natural radiation to airborne radiation survey data on transects from coastal California to the Colorado Plateau

NASA Astrophysics Data System (ADS)

Stoffer, P. W.; Hernández, L.; Messina, P.; Dearaujo, J.; Li, A.; Hicks, A.; White, L.

2008-12-01

Natural gamma radiation measurements were collected with a hand-held Geiger counter at nearly 400 locations on two general transects across the southwestern United States. The data are used to provide ground-truth comparison to published airborne radiation surveys of the region. The first transect was collected by high school students in the SF-ROCKS program at San Francisco State University in the summer of 2008 starting in San Francisco. Data were collected across the Sierra Nevada Range on I-80, and across Highway 50 in Nevada, and I-70 in Utah. Data were collected in and around Great Basin, Arches, Capitol Reef, Bryce, and Zion National Parks, and Grand Staircase-Escalante National Monument. A second transect extends from San José, California to Flagstaff, Arizona and includes the Mojave National Reserve, Death Valley region, and locations throughout the Navajo Reservation region in northern Arizona and western New Mexico. Radiation data (with GPS reference) were collected from all the major sedimentary rock formations and igneous rocks of the Colorado Plateau and from many igneous and metamorphic rocks throughout the Great Basin and southern California deserts. Anomalously high localized levels were noted in selected sedimentary units associated with uranium exploration targets in the Colorado Plateau region, and in caverns and rock fissures where radon gas (and accumulation of derivative fission products) are the inferred sources.

Mineralogy and stratigraphy of the Gale crater rim, wall, and floor units

NASA Astrophysics Data System (ADS)

Buz, Jennifer; Ehlmann, Bethany L.; Pan, Lu; Grotzinger, John P.

2017-05-01

The Curiosity rover has detected diverse lithologies in float rocks and sedimentary units on the Gale crater floor, interpreted to have been transported from the rim. To understand their provenance, we examine the mineralogy and geology of Gale's rim, walls, and floor, using high-resolution imagery and infrared spectra. While no significant differences in bedrock spectral properties were observed within most Thermal Emission Imaging System and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) scenes, some CRISM scenes of rim and wall rocks showed olivine-bearing bedrock accompanied by Fe/Mg phyllosilicates. Hydrated materials with 2.48 μm absorptions in Gale's eastern walls are spectrally similar to the sulfate unit in Mount Sharp (Aeolis Mons). Sedimentary strata on the Gale floor southwest of the landing site, likely coeval with the Bradbury units explored by Curiosity, also are hydrated and/or have Fe/Mg phyllosilicates. Spectral properties of these phyllosilicates differ from the Al-substituted nontronite detected by CRISM in Mount Sharp, suggesting formation by fluids of different composition. Geologic mapping of the crater floor shows that the hydrated or hydroxylated materials are typically overlain by spectrally undistinctive, erosionally resistant, cliff-forming units. Additionally, a 4 km impact crater exposes >250 m of the Gale floor, including finely layered units. No basement rocks are exposed, thus indicating sedimentary deposits ≥250 m beneath strata studied by Curiosity. Collectively, the data indicate substantial sedimentary infill of Gale crater, including some materials derived from the crater rim. Lowermost thin layers are consistent with deposition in a lacustrine environment; interbedded hydrated/hydroxylated units may signify changing environmental conditions, perhaps in a drying or episodically dry lake bed.

Sedimentary Geochemistry of Martian Samples from the Pathfinder Mission

NASA Technical Reports Server (NTRS)

McLennan, Scott M.

2001-01-01

The purpose of this research project was to evaluate the APXS data collected on soils and rocks at the Pathfinder site in terms of sedimentary geochemistry. Below are described the major findings of this research: (1) An influential model to explain the chemical variation among Pathfinder soils and rocks is a two component mixing model where rocks of fairly uniform composition mix with soil of uniform composition; (2) The very strong positive correlation between MgO and SO, points to a control by a MgSO4 mineral however, spectroscopic data continue to suggest that Fe-sulfates, notably schwertmannite and jarosite, may be important components; (3) In an attempt to better understand the causes of complexities in mixing relationships, the possible influence of sedimentary transport has been evaluated; (4) Another aspect of this research has been to examine the possibility of sedimentary silica being a significant phase on Mars; and (5) On Earth, the geochemistry of sedimentary rocks has been used to constrain the chemical composition of the continental crust and an important part of this research was to evaluate this approach for Mars.

Uranium favorability of the San Rafael Swell area, east-central Utah

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mickle, D G; Jones, C A; Gallagher, G L

1977-10-01

The San Rafael Swell project area in east-central Utah is approximately 3,000 sq mi and includes the San Rafael Swell anticline and the northern part of the Waterpocket Fold monocline at Capitol Reef. Rocks in the area are predominantly sedimentary rocks of Pennsylvanian through Cretaceous age. Important deposits of uranium in the project area are restricted to two formations, the Chinle (Triassic) and Morrison (Jurassic) Formations. A third formation, the White Rim Sandstone (Permian), was also studied because of reported exploration activity. The White Rim Sandstone is considered generally unfavorable on the basis of lithologic characteristics, distance from a possiblemore » source of uranium, lack of apparent mineralization, and the scarcity of anomalies on gamma-ray logs or in rock, water, and stream-sediment samples. The lower Chinle from the Moss Back Member down to the base of the formation is favorable because it is a known producer. New areas for exploration are all subsurface. Both Salt Wash and Brushy Basin Members of the Morrison Formation are favorable. The Salt Wash Member is favorable because it is a known producer. The Brushy Basin Member is favorable as a low-grade resource.« less

In-situ Micro-structural Studies of Gas Hydrate Formation in Sedimentary Matrices

NASA Astrophysics Data System (ADS)

Kuhs, Werner F.; Chaouachi, Marwen; Falenty, Andrzej; Sell, Kathleen; Schwarz, Jens-Oliver; Wolf, Martin; Enzmann, Frieder; Kersten, Michael; Haberthür, David

2015-04-01

The formation process of gas hydrates in sedimentary matrices is of crucial importance for the physical and transport properties of the resulting aggregates. This process has never been observed in-situ with sub-micron resolution. Here, we report on synchrotron-based micro-tomographic studies by which the nucleation and growth processes of gas hydrate were observed in different sedimentary matrices (natural quartz, glass beds with different surface properties, with and without admixtures of kaolinite and montmorillonite) at varying water saturation. The nucleation sites can be easily identified and the growth pattern is clearly established. In under-saturated sediments the nucleation starts at the water-gas interface and proceeds from there to form predominantly isometric single crystals of 10-20μm size. Using a newly developed synchrotron-based method we have determined the crystallite size distributions (CSD) of the gas hydrate in the sedimentary matrix confirming in a quantitative and statistically relevant manner the impressions from the tomographic reconstructions. It is noteworthy that the CSDs from synthetic hydrates are distinctly smaller than those of natural gas hydrates [1], which suggest that coarsening processes take place in the sedimentary matrix after the initial hydrate formation. Understanding the processes of formation and coarsening may eventually permit the determination of the age of gas hydrates in sedimentary matrices [2], which are largely unknown at present. Furthermore, the full micro-structural picture and its evolution will enable quantitative digital rock physics modeling to reveal poroelastic properties and in this way to support the exploration and exploitation of gas hydrate resources in the future. [1] Klapp S.A., Hemes S., Klein H., Bohrmann G., McDonald I., Kuhs W.F. Grain size measurements of natural gas hydrates. Marine Geology 2010; 274(1-4):85-94. [2] Klapp S.A., Klein H, Kuhs W.F. First determination of gas hydrate crystallite size distribution using high-energy synchrotron radiation. Geophys.Res.Letters, 2007 ; 34 : L13608, DOI:10.1029/2006GL029134

Geologic map of the Lockwood Valley Quadrangle, Ventura County, California

USGS Publications Warehouse

Kellogg, Karl S.

2001-01-01

The Lockwood Valley quadrangle is located in the western Transverse Ranges of California, about 10 km southwest of Frazier Park. It includes the western flank of Frazier Mountain, southern Lockwood Valley, and a region of the Los Padres National Forest near northern Piru Creek. The oldest rocks are mostly biotite augen gneiss, in the hanging wall of the Frazier Mountain thrust and in a large body south of the thrust. A U-Pb zircon age for the gneiss is 1690+5 Ma (W. Premo, unpublished data). Two Cretaceous intrusive rocks are named the quartz monzonite of Sheep Creek and the coarse-grained granodiorite of Lockwood Peak. A U-Pb zircon age on the latter is 76.05+0.22 Ma (W. Premo, unpublished data). The northeastern edge of a large Eocene marine basin, comprising the sandstones, shales, and conglomerates of the Juncal Formation, occupies the southwestern 25 percent of the quadrangle. Miocene fluvial rocks, including coarse boulder conglomerates, sandstones, and shale, of the Caliente Formation crop out mostly in the northwestern part of the quadrangle. Commercially exploitable Lockwood Clay unconformably overlies the Caliente, which, in turn, is overlain by the mostly fluvial Pliocene Quatal Formation. Two major south-directed thrusts, the Frazier Mountain thrust and the South Frazier Mountain thrust, place crystalline rocks over Miocene and Pliocene sedimentary rocks. The South Frazier Mountain thrust is transected by the newly recognized, north-directed Lockwood Peak reverse fault. In addition, the newly recognized south-directed Yellowjacket thrust displaces rocks of the Pliocene Quatal Formation.

Mineral and energy resources of the BLM Roswell Resource Area, east-central New Mexico

USGS Publications Warehouse

Bartsch-Winkler, Susan B.

1992-01-01

The sedimentary formations of the Roswell Resource Area have significant mineral and energy resources. Some of the pre-Pennsylvanian sequences in the Northwestern Shelf of the Permian Basin are oil and gas reservoirs, and Pennsylvanian rocks in Tucumcari basin are reservoirs of oil and gas as well as source rocks for oil and gas in Triassic rocks. Pre-Permian rocks also contain minor deposits of uranium and vanadium, limestone, and associated gases. Hydrocarbon reservoirs in Permian rocks include associated gases such as carbon dioxide, helium, and nitrogen. Permian rocks are mineralized adjacent to the Lincoln County porphyry belt, and include deposits of copper, uranium, manganese, iron, polymetallic veins, and Mississippi-valley-type (MVT) lead-zinc. Industrial minerals in Permian rocks include fluorite, barite, potash, halite, polyhalite, gypsum, anhydrite, sulfur, limestone, dolomite, brine deposits (iodine and bromine), aggregate (sand), and dimension stone. Doubly terminated quartz crystals, called "Pecos diamonds" and collected as mineral specimens, occur in Permian rocks along the Pecos River. Mesozoic sedimentary rocks are hosts for copper, uranium, and small quantities of gold-silver-tellurium veins, as well as significant deposits of oil and gas, COa, asphalt, coal, and dimension stone. Mesozoic rocks contain limited amounts of limestone, gypsum, petrified wood, dinosaur remains, and clays. Tertiary rocks host ore deposits commonly associated with intrusive rocks, including platinum group elements, iron skarns, manganese, uranium and vanadium, molybdenum, polymetallic vein deposits, gold-silver- tellurium veins, and thorium-rare earth veins. Museum-quality quartz crystals in Lincoln County were formed in association with intrusive rocks in the Lincoln County porphyry belt. Industrial minerals in Tertiary rocks include fluorite, vein- and bedded-barite, caliche, limestone, and aggregate. Tertiary and Quaternary sediments host important placer deposits of gold and titanium, and minor silver, uranium occurrences, as well as important industrial commodities, including caliche, limestone and dolomite, and aggregate (sand). Quaternary basalt contains sub-ore-grade uranium, scoria, and clay deposits.

Mineral and energy resources of the Roswell Resource Area, East-Central New Mexico

USGS Publications Warehouse

Bartsch-Winkler, Susan B.; Donatich, Alessandro J.

1995-01-01

The sedimentary formations of the Roswell Resource Area have significant mineral and energy resources. Some of the pre-Pennsylvanian sequences in the Northwestern Shelf of the Permian Basin are oil and gas reservoirs, and Pennsylvanian rocks in Tucumcari Basin are reservoirs of oil and gas as well as source rocks for oil and gas in Triassic rocks. Pre-Permian rocks also contain minor deposits of uranium and vanadium, limestone, and gases. Hydrocarbon reservoirs in Permian rocks include associated gases such as carbon dioxide, helium, and nitrogen. Permian rocks are mineralized adjacent to the Lincoln County porphyry belt, and include deposits of copper, uranium, manganese, iron, polymetallic veins, and Mississippi-Valley-type lead-zinc. Industrial minerals in Permian rocks include fluorite, barite, potash, halite, polyhalite, gypsum, anhydrite, sulfur, limestone, dolomite, brine deposits (iodine and bromine), aggregate (sand), and dimension stone. Doubly terminated quartz crystals, called 'Pecos diamonds' and collected as mineral specimens, occur in Permian rocks along the Pecos River. Mesozoic sedimentary rocks are hosts for copper, uranium, and small quantities of gold-silver-tellurium veins, as well as significant deposits of oil and gas, carbon dioxide, asphalt, coal, and dimension stone. Mesozoic rocks contain limited amounts of limestone, gypsum, petrified wood, and clay. Tertiary rocks host ore deposits commonly associated with intrusive rocks, including platinum-group elements, iron skarns, manganese, uranium and vanadium, molybdenum, polymetallic vein deposits, gold-silver-tellurium veins, and thorium-rare-earth veins. Museum-quality quartz crystals are associated with Tertiary intrusive rocks. Industrial minerals in Tertiary rocks include fluorite, vein- and bedded-barite, caliche, limestone, and aggregate. Tertiary and Quaternary sediments host important placer deposits of gold and titanium, and occurrences of silver and uranium. Important industrial commodities include caliche, limestone and dolomite, and aggregate. Quaternary basalt contains sub-ore-grade uranium, scoria, and clay deposits.

Geology of the Anlauf and Drain Quadrangles, Douglas and Lane Counties, Oregon

USGS Publications Warehouse

Hoover, Linn

1963-01-01

The Anlauf and Drain quadrangles, Oregon, lie about 20 miles south of the city of Eugene, in Douglas and Lane Counties. They constitute an area of about 435 square miles that includes parts of both the Cascade Range and Coast Range physiographic provinces. A sequence of lower Tertiary sedimentary and volcanic rocks with a maximum thickness of about 20,000 feet is exposed in the area. The oldest part of this sequence is the Umpqua formation of early Eocene age consisting of a lower member of vesicular and amygdaloidal olivine basalt flows, a middle member of water-laid vitric and lapilli crystal tuff, and an upper member of interbedded fissile siltstone and basaltic sandstone which contains a 300-foot tongue of massive to thick-bedded basaltic sandstone near its top. These rocks are predominantly of marine origin, although the general absence of pillow structures which are common in basaltic lavas of equivalent age elsewhere in the Coast Ranges suggests that some of the flows were poured out subaerially. The overlying tuff member, however, contains Foraminifera and in places has a lime content slightly in excess of 10 percent. Mollusca and Foraminifera indicate that the Umpqua formation is of early Eocene age and is a correlative of the Capay formation of California. The Tyee formation of middle Eocene age overlies the Umpqua formation and consists of more than 5,000 feet of rhythmically deposited sandstone and siltstone in beds 2 to 30 feet thick. The basal part of each bed consists of medium- to coarse-grained sandstone that grades upward into fine-grained sand- stone and siltstone. The principal constituents of the sandstone are quartz, partly a1tered feldspar, mica, clay, and fragments of basalt, fine-grained argillaceous rocks, and mica schist. Other detrital minerals include epidote, garnet, blue-green hornblende, tourmaline, and zoisite. The depositional environment of the Tyee formation is poorly known, although the rhythmic-graded bedding suggests turbidity currents. About 500 feet of sandstone and siltstone assigned to the Spencer formation of late Eocene age unconformably overlies the Tyee formation. The Spencer formation, better exposed in the east-central part of the Coast Ranges, contains marine fossils but also has thin impure coal beds, indicative of strand-line accumulation. The sandstone in the Spencer formation is very similar to that in the Tyee formation, from which it was probably derived. The Fisher formation contains about 5,500 feet of nonmarine pyroclastic and volcanic rocks that are related to the volcanic rock sequences of the western Cascade Range. The formation is characterized by a wide variety of rock types, including conglomerate, tuffaceous sandstone and siltstone, vitric and crystal tuff, waterlaid and mudflow breccia, and andesitic lava flows. These rocks gen- erally occur in lenticular beds that have little stratigraphic significance. The rocks apparently accumulated on a plain slightly above sea level that was subjected alternately to fiooding by running water and to desiccation. Fossil leaves from the lowermost part of the Fisher formation are of late Eocene age; the upper part of the formation is of early, and possibly niiddle, Oligocene age. A few exposures of olivine basalt were mapped in the extreme northern part of the Anlauf quadrangle. The flows, more extensively exposed to the north, overlie the Fisher formation, and, therefore, are tentatively considered to be post-Oligocene in age. All these stratigraphic units, but principally the Fisher formation, are cut by dikes, sills, and stocklike bodies of 'porphyritic basalt, diabase, and norite. Contemporaneously with the emplacement of most of these rocks, in late Miocene (?) time, hydrothermal solutions locailly altered the sedimentary and extrusive igneous racks and deposited cinnabar and other sulfide minerals, carbonates, and silica. Three parallel nartheastward-trending

Characteristics of depositional environment and evolution of Upper Cretaceous Mishrif Formation, Halfaya Oil field, Iraq based on sedimentary microfacies analysis

NASA Astrophysics Data System (ADS)

Zhong, Yuan; Zhou, Lu; Tan, Xiucheng; Guo, Rui; Zhao, Limin; Li, Fei; Jin, Zhimin; Chen, Yantao

2018-04-01

As one of the most important carbonate targets in the Middle East, Upper Cretaceous Mishrif Formation has been highlighted for a long time. Although consensus has been reached on the overall sedimentary background, disputes still exist in understanding the sedimentary environment changes among sub-regions due to relatively limited research, rare outcrop, and incomplete drilled core, which hinders the analysis on sedimentary environment and thus the horizontal and vertical correlation. In this study, taking the Halfaya Oil Field as an example, the sedimentary microfacies analysis method was introduced to comprehensively characterize the cored interval of Mishrif Formation, including Single Layers MC1-1 to MA2. A total of 11 sedimentary microfacies are identified through system identification of sedimentary microfacies and environmental analysis, with reference to the standard microfacies classification in the rimmed carbonate platform. Then three kinds of environments are identified through microfacies assemblage analysis, namely restricted platform, open platform, and platform margin. Systematic analyses indicate that the deposits are mainly developed in the open platform and platform margin. Meanwhile, rock-electricity interpretation model is established according to the electricity response to cored intervals, and is then employed to interpret the uncored intervals, which finally helps build the sedimentary evolution pattern through horizontal and vertical correlation. It is proposed that the Single Layers MC1-1 to MB2-3 were deposited in the open platform featured by low water level, including sub-environments of low-energy shoal within platform and inter-shoal sea; Single Layers MB2-2 to MB1-2B were deposited in the open platform and platform margin, including sub-environments of high-energy shoal on the platform margin, low-energy shoal within platform, inter-shoal sea, and open sea; and Single Layers MB1-2A to MA2 were again deposited in the open platform with high water level, and the circumstance of open sea was dominant. The deposition of Single Layers MC1-1 to MA2 actually corresponded to a retrogradation-progradation process. Results of this study will not only provide significant guidance to the exploration and development of Mishrif Formation, Halfaya Oil Field, but also support that the theory of sedimentary environment correlation with adjacent areas is reliable.

Late Cretaceous fluvial systems and inferred tectonic history, central Utah

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawton, T.F.

1983-08-01

Upper Campanian nonmarine sedimentary rocks exposed between the Wasatch Plateau and the Green River in central Utah record a tectonic transition from thin-skinned deformation in the thrust belt to basement-cored uplift in the foreland region. Sandstones within the section consist of two distinct compositional suites, a lower quartzose petrofacies and an upper lithic petrofacies. The volcanic lithic grains of the Farrer and Tuscher Formations were derived from more distal arc sources to the southwest, and transported through the thrust belt somewhere west of the Kaiparowits region, where time-equivalent sedimentary rocks are also rich in volcanic lithic fragments. Disappearance of volcanicmore » lithics and appearance of pebbles at the top of the Tuscher Formation is interpreted to reflect a latest Campanian reorganization of drainage patterns that marked initial growth of the San Rafael swell and similar basement uplifts to the south of the swell. Contemporaneous fluvial systems that deposited the uppermost part of the Price River Formation in the Wasatch Plateau were apparently unaffected by the uplift and continued to flow northeast. Depositional patterns thus indicate that initial growth of the San Rafael swell was probably concurrent with late deformation in the thrust belt. Depositional onlap across the Mesaverde Group by a largely post-tectonic assemblage of fluvial and lacustrine strata (North Horn Formation) indicates a minimum late Paleocene age for growth of the San Rafael swell and deformation within the thrust belt.« less

Rapid emergence of life shown by discovery of 3,700-million-year-old microbial structures.

PubMed

Nutman, Allen P; Bennett, Vickie C; Friend, Clark R L; Van Kranendonk, Martin J; Chivas, Allan R

2016-09-22

Biological activity is a major factor in Earth's chemical cycles, including facilitating CO 2 sequestration and providing climate feedbacks. Thus a key question in Earth's evolution is when did life arise and impact hydrosphere-atmosphere-lithosphere chemical cycles? Until now, evidence for the oldest life on Earth focused on debated stable isotopic signatures of 3,800-3,700 million year (Myr)-old metamorphosed sedimentary rocks and minerals from the Isua supracrustal belt (ISB), southwest Greenland. Here we report evidence for ancient life from a newly exposed outcrop of 3,700-Myr-old metacarbonate rocks in the ISB that contain 1-4-cm-high stromatolites-macroscopically layered structures produced by microbial communities. The ISB stromatolites grew in a shallow marine environment, as indicated by seawater-like rare-earth element plus yttrium trace element signatures of the metacarbonates, and by interlayered detrital sedimentary rocks with cross-lamination and storm-wave generated breccias. The ISB stromatolites predate by 220 Myr the previous most convincing and generally accepted multidisciplinary evidence for oldest life remains in the 3,480-Myr-old Dresser Formation of the Pilbara Craton, Australia. The presence of the ISB stromatolites demonstrates the establishment of shallow marine carbonate production with biotic CO 2 sequestration by 3,700 million years ago (Ma), near the start of Earth's sedimentary record. A sophistication of life by 3,700 Ma is in accord with genetic molecular clock studies placing life's origin in the Hadean eon (>4,000 Ma).

Extraordinary rocks from the peak ring of the Chicxulub impact crater: P-wave velocity, density, and porosity measurements from IODP/ICDP Expedition 364

NASA Astrophysics Data System (ADS)

Christeson, G. L.; Gulick, S. P. S.; Morgan, J. V.; Gebhardt, C.; Kring, D. A.; Le Ber, E.; Lofi, J.; Nixon, C.; Poelchau, M.; Rae, A. S. P.; Rebolledo-Vieyra, M.; Riller, U.; Schmitt, D. R.; Wittmann, A.; Bralower, T. J.; Chenot, E.; Claeys, P.; Cockell, C. S.; Coolen, M. J. L.; Ferrière, L.; Green, S.; Goto, K.; Jones, H.; Lowery, C. M.; Mellett, C.; Ocampo-Torres, R.; Perez-Cruz, L.; Pickersgill, A. E.; Rasmussen, C.; Sato, H.; Smit, J.; Tikoo, S. M.; Tomioka, N.; Urrutia-Fucugauchi, J.; Whalen, M. T.; Xiao, L.; Yamaguchi, K. E.

2018-08-01

Joint International Ocean Discovery Program and International Continental Scientific Drilling Program Expedition 364 drilled into the peak ring of the Chicxulub impact crater. We present P-wave velocity, density, and porosity measurements from Hole M0077A that reveal unusual physical properties of the peak-ring rocks. Across the boundary between post-impact sedimentary rock and suevite (impact melt-bearing breccia) we measure a sharp decrease in velocity and density, and an increase in porosity. Velocity, density, and porosity values for the suevite are 2900-3700 m/s, 2.06-2.37 g/cm3, and 20-35%, respectively. The thin (25 m) impact melt rock unit below the suevite has velocity measurements of 3650-4350 m/s, density measurements of 2.26-2.37 g/cm3, and porosity measurements of 19-22%. We associate the low velocity, low density, and high porosity of suevite and impact melt rock with rapid emplacement, hydrothermal alteration products, and observations of pore space, vugs, and vesicles. The uplifted granitic peak ring materials have values of 4000-4200 m/s, 2.39-2.44 g/cm3, and 8-13% for velocity, density, and porosity, respectively; these values differ significantly from typical unaltered granite which has higher velocity and density, and lower porosity. The majority of Hole M0077A peak-ring velocity, density, and porosity measurements indicate considerable rock damage, and are consistent with numerical model predictions for peak-ring formation where the lithologies present within the peak ring represent some of the most shocked and damaged rocks in an impact basin. We integrate our results with previous seismic datasets to map the suevite near the borehole. We map suevite below the Paleogene sedimentary rock in the annular trough, on the peak ring, and in the central basin, implying that, post impact, suevite covered the entire floor of the impact basin. Suevite thickness is 100-165 m on the top of the peak ring but 200 m in the central basin, suggesting that suevite flowed downslope from the collapsing central uplift during and after peak-ring formation, accumulating preferentially within the central basin.

Elemental Characteristics of Australian Sedimentary Opals and their Implications for Opal Formation and Gemstone Fingerprinting

NASA Astrophysics Data System (ADS)

Dutkiewicz, A.; Landgrebe, T. C.; Rey, P. F.

2011-12-01

Opal consists of amorphous SiO2.nH2O comprising a network of silica spheres, which in precious opal are of similar size and form an ordered network allowing light to diffract into an array of colors. Common opal, which is often associated with precious opal, lacks this play of color as it is composed of silica spheres of variable sizes. Australia supplies over 95% of the world's precious opal. The opal is almost exclusively located within Cretaceous sedimentary rocks of the Great Artesian Basin, which experienced a major phase of uplift in the Late Cretaceous with subsequent erosion removing a package of sedimentary rock up to 3 km in thickness. Intense weathering resulted in extensive silicification at relatively shallow levels within the Tertiary regolith. However, despite a billion dollar industry and a well-constrained geological history of the basin, the formation of sedimentary opal and its uniqueness to the Australian continent are still very poorly understood. In this study we have used laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) on precious and common opal from key opal mining areas in order to constrain the possible sources of silica fluids involved in opal genesis and to assess whether any major or trace elements could be used to determine the provenance of opal with respect to a particular mining area. A total of 123 spots, each comprising 59 elements, including rare earth elements were analyzed. Globally, volcanic and sedimentary opals can be distinguished on the basis of Ba and Ca concentrations. Although the opals from the Great Artesian Basin are all sedimentary, some show Ba concentrations consistent with volcanic opals suggesting that silica fluids from which they formed were derived from a volcanic province. The most likely source is the Cretaceous volcanic-plutonic province of central Queensland, which supplied vast amounts of volcanogenic material into the Great Artesian Basin. The weathering of feldspars from the volcaniclastic rocks would have provided ample silica-rich fluids for the formation of opal as well as kaolinite, which is abundant within the opal host rocks. Multivariate feature-selection analysis (using a signal-to-noise criterion) of elemental concentrations in opal bands from different locations indicates that the mining region from which the opals originate can best be discriminated using a combination of K, Se and Hf. The best independent provenance discriminators are K, Rb, Ba, Cs and Hf. Precious and common opal can be discriminated using a combination of Th, Hf and Cs with the best independent discriminators being Th, Bi and La. Overall, Th is the best element by which to discriminate between precious and common opals as these are characterized by relatively low and relatively high concentrations of Th, respectively. In general, major and trace element concentrations are significantly higher in common opals than in precious ones. Precious opal color is very difficult to discriminate based on elemental concentrations as it depends on the size and ordering of spheres. However, brown common opal can be distinguished from grey common opal based on concentrations of Pb, Ba and Fe. Opal fingerprinting is therefore possible using just a small number of elements.

SILLi 1.0: a 1-D numerical tool quantifying the thermal effects of sill intrusions

NASA Astrophysics Data System (ADS)

Iyer, Karthik; Svensen, Henrik; Schmid, Daniel W.

2018-01-01

Igneous intrusions in sedimentary basins may have a profound effect on the thermal structure and physical properties of the hosting sedimentary rocks. These include mechanical effects such as deformation and uplift of sedimentary layers, generation of overpressure, mineral reactions and porosity evolution, and fracturing and vent formation following devolatilization reactions and the generation of CO2 and CH4. The gas generation and subsequent migration and venting may have contributed to several of the past climatic changes such as the end-Permian event and the Paleocene-Eocene Thermal Maximum. Additionally, the generation and expulsion of hydrocarbons and cracking of pre-existing oil reservoirs around a hot magmatic intrusion are of significant interest to the energy industry. In this paper, we present a user-friendly 1-D finite element method (FEM)-based tool, SILLi, which calculates the thermal effects of sill intrusions on the enclosing sedimentary stratigraphy. The model is accompanied by three case studies of sills emplaced in two different sedimentary basins, the Karoo Basin in South Africa and the Vøring Basin off the shore of Norway. An additional example includes emplacement of a dyke in a cooling pluton which forgoes sedimentation within a basin. Input data for the model are the present-day well log or sedimentary column with an Excel input file and include rock parameters such as thermal conductivity, total organic carbon (TOC) content, porosity and latent heats. The model accounts for sedimentation and burial based on a rate calculated by the sedimentary layer thickness and age. Erosion of the sedimentary column is also included to account for realistic basin evolution. Multiple sills can be emplaced within the system with varying ages. The emplacement of a sill occurs instantaneously. The model can be applied to volcanic sedimentary basins occurring globally. The model output includes the thermal evolution of the sedimentary column through time and the changes that take place following sill emplacement such as TOC changes, thermal maturity and the amount of organic and carbonate-derived CO2. The TOC and vitrinite results can be readily benchmarked within the tool to present-day values measured within the sedimentary column. This allows the user to determine the conditions required to obtain results that match observables and leads to a better understanding of metamorphic processes in sedimentary basins.

Geologic map of the Chelan 30-minute by 60-minute quadrangle, Washington

USGS Publications Warehouse

Tabor, R.W.; Frizzell, V.A.; Whetten, J.T.; Waitt, R.B.; Swanson, D.A.; Byerly, G.R.; Booth, D.B.; Hetherington, M.J.; Zartman, R.E.

1987-01-01

Summary -- The Chelan quadrangle hosts a wide variety of rocks and deposits and display a long geologic history ranging from possible Precambrian to Recent. Two major structures, the Leavenworth and Entiat faults divide cross the quadrangle from southeast to northwest and bound the Chiwaukum 'graben', a structural low preserving Tertiary sedimentary rocks between blocks of older, metamorphic and igneous rocks. Pre-Tertiary metamorphic rocks in the quadrangle are subdivided into five major tectonostratigraphic terranes: (1) the Ingalls terrane, equivalent to the Jurassic Ingalls Tectonic Complex of probable mantle and deep oceanic rocks origin, (2) the Nason terrane, composed of the Chiwaukum Schist and related gneiss, (3) the Swakane terrane, made up entirely of the Swakane Biotite Gneiss, a metamorphosed, possibly Precambrian, sedimentary and/or volcanic rock, (4) the Mad River terrane composed mostly of the rocks of the Napeequa River area (Napeequa Schist), a unit of oceanic protolith now considered part of the Chelan Mountains terrane (the Mad River terrane has been abandoned, 2001), and (5) the Chelan Mountains terrane, dominated by the Chelan Complex of Hopson and Mattinson (1971) which is composed of migmatite and gneissic to tonalite of deep-seated igneous and metamorphic origin.During an episode of Late Cretaceous regional metamorphism, all the terranes were intruded by deepseated tonalite to granodiorite plutons, including the Mount Stuart batholith, Ten Peak and Dirty Face plutons, and the Entiat pluton and massive granitoid rocks of the Chelan Complex. The Duncan Hill pluton intruded rocks of the Chelan Mountains terrane in the Middle Eocene. At about the same time fluvial arkosic sediment of the Chumstick Formation was deposited in a depression. The outpouring of basalt lavas to the southeast of the quadrangle during the Miocene built up the Columbia River Basalt Group. These now slightly warped lavas lapped onto the uplifted older rocks. Deformation, uplift, and erosion recorded in the rocks and deposits of the quadrangle continued into post-Miocene time. Quaternary deposits reflect advances of glaciers down the major valleys, a complicated history of catastrophic glacial floods down the Columbia River, the formation of lakes in the Columbia and Wenatchee river valleys by landslides and flood backwaters, and hillslope erosion by large and small landslides and debris flows.

New evidence for long-distance fluid migration within the Earth's crust

NASA Astrophysics Data System (ADS)

Person, M.; Baumgartner, L.

1995-07-01

During the past decade, geologists have come to appreciate the interconnectedness of hydrologic, tectonic, thermal, and geochemical processes operating within the Earth's continental crust [Oliver, 1992]. This has led to a new geologically-based conceptual model of hydrology which is crustal-scale and is centered in plate tectonics theory (Fig. 1). From a geological perspective, the tectonic and thermal processes which drive plate motion are also responsible, either directly or indirectly, for inducing fluid motion across and through the continents. Supporting evidence for this emerging paradigm is based on observations of pervasive rock-water interactions associated with geologic processes as diverse as the chemical alteration of crustal rocks [Shelton et al, 1992; Elliott and Aronson, 1993; McManus and Hanor, 1993; Ague, 1991, 1994], devolatilization of minerals during burial and consequent metamorphism [Cox and Etheridge, 1989], the formation of energy and mineral deposits [Garven et al, 1993; and Cathles et al, 1993], remagnitization of ancient sedimentary rocks [McCabe and Elmore, 1989], the tectonic deformation of sedimentary basins [Oliver 1992, Ge and Garven, 1992], and the regulation of global climate [Caldeira et al, 1993, Kerrick and Caldeira, 1993, 1994]. This paper summarizes the many recent lines of theoretical, laboratory, and field evidence from diverse disciplines within the Earth Sciences supporting this emerging view of crustal-scale hydrology. Evidence for two types of long-distance fluid migration are highlighted: vertical pore water movement through crystalline rocks to depths greater than six km and lateral groundwater movement through sedimentary basins over hundereds of km. Also emphasized are the many driving mechanisms on fluid motion which are not typically considered in water quality and water supply investigations. Some geologic terms used in this paper, which may be unfamiliar to the reader, are defined in geologic dictionaries [American Geologic Institute, 1976].

Mineralogy of Mudstone at Gale Crater, Mars: Evidence for Dynamic Lacustrine Environments

NASA Technical Reports Server (NTRS)

Rampe, E. B.; Ming, D. W.; Grotzinger, J. P.; Morris, R. V.; Blake, D. F.; Vaniman, D. T.; Bristow, T. F.; Yen, A. S.; Chipera, S. J.; Morrison, S. M.;

Up-Scaling Geochemical Reaction Rates for Carbon Dioxide (CO2) in Deep Saline Aquifers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, Catherine A

2013-02-28

Geochemical reactions in deep subsurface environments are complicated by the consolidated nature and mineralogical complexity of sedimentary rocks. Understanding the kinetics of these reactions is critical to our ability to make long-term predictions about subsurface processes such as pH buffering, alteration in rock structure, permeability changes, and formation of secondary precipitates. In this project, we used a combination of experiments and numerical simulation to bridge the gap between our knowledge of these reactions at the lab scale and rates that are meaningful for modeling reactive transport at core scales. The focus is on acid-driven mineral dissolution, which is specifically relevantmore » in the context of CO2-water-rock interactions in geological sequestration of carbon dioxide. The project led to major findings in three areas. First, we modeled reactive transport in pore-network systems to investigate scaling effects in geochemical reaction rates. We found significant scaling effects when CO2 concentrations are high and reaction rates are fast. These findings indicate that the increased acidity associated with geological sequestration can generate conditions for which proper scaling tools are yet to be developed. Second, we used mathematical modeling to investigate the extent to which SO2, if co-injected with CO2, would acidify formation brines. We found that there exist realistic conditions in which the impact on brine acidity will be limited due to diffusion rate-limited SO2 dissolution from the CO2 phase, and the subsequent pH shift may also be limited by the lack of availability of oxidants to produce sulfuric acid. Third, for three Viking sandstones (Alberta sedimentary basin, Canada), we employed backscattered electron microscopy and energy dispersive X-ray spectroscopy to statistically characterize mineral contact with pore space. We determined that for reactive minerals in sedimentary consolidated rocks, abundance alone is not a good predictor of mineral accessible surface area, and should not be used in reactive transport modeling. Our work showed that reaction rates would be overestimated by three to five times.« less

Clay mineral formation and transformation in rocks and soils

USGS Publications Warehouse

Eberl, D.D.

1983-01-01

Three mechanisms for clay mineral formation (inheritance, neoformation, and transformation) operating in three geological environments (weathering, sedimentary, and diagenetic-hydrothermal) yield nine possibilities for the origin of clay minerals in nature. Several of these possibilities are discussed in terms of the rock cycle. The mineralogy of clays neoformed in the weathering environment is a function of solution chemistry, with the most dilute solutions favoring formation of the least soluble clays. After erosion and transportation, these clays may be deposited on the ocean floor in a lateral sequence that depends on floccule size. Clays undergo little reaction in the ocean, except for ion exchange and the neoformation of smectite; therefore, most clays found on the ocean floor are inherited from adjacent continents. Upon burial and heating, however, dioctahedral smectite reacts in the diagenetic environment to yield mixed-layer illite-smectite, and finally illite. With uplift and weathering, the cycle begins again. Refs.

Optimization of Well Configuration for a Sedimentary Enhanced Geothermal Reservoir

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Mengnan; Cho, JaeKyoung; Zerpa, Luis E.

The extraction of geothermal energy in the form of hot water from sedimentary rock formations could expand the current geothermal energy resources toward new regions. From previous work, we observed that sedimentary geothermal reservoirs with relatively low permeability would require the application of enhancement techniques (e.g., well hydraulic stimulation) to achieve commercial production/injection rates. In this paper we extend our previous work to develop a methodology to determine the optimum well configuration that maximizes the hydraulic performance of the geothermal system. The geothermal systems considered consist of one vertical well doublet system with hydraulic fractures, and three horizontal well configurationsmore » with open-hole completion, longitudinal fractures and transverse fractures, respectively. A commercial thermal reservoir simulation is used to evaluate the geothermal reservoir performance using as design parameters the well spacing and the length of the horizontal wells. The results obtained from the numerical simulations are used to build a response surface model based on the multiple linear regression method. The optimum configuration of the sedimentary geothermal systems is obtained from the analysis of the response surface model. The proposed methodology is applied to a case study based on a reservoir model of the Lyons sandstone formation, located in the Wattenberg field, Denver-Julesburg basin, Colorado.« less

Crater Mound Formation by Wind Erosion on Mars

NASA Astrophysics Data System (ADS)

Steele, L. J.; Kite, E. S.; Michaels, T. I.

2018-01-01

Most of Mars' ancient sedimentary rocks by volume are in wind-eroded sedimentary mounds within impact craters and canyons, but the connections between mound form and wind erosion are unclear. We perform mesoscale simulations of different crater and mound morphologies to understand the formation of sedimentary mounds. As crater depth increases, slope winds produce increased erosion near the base of the crater wall, forming mounds. Peak erosion rates occur when the crater depth is ˜2 km. Mound evolution depends on the size of the host crater. In smaller craters mounds preferentially erode at the top, becoming more squat, while in larger craters mounds become steeper sided. This agrees with observations where smaller craters tend to have proportionally shorter mounds and larger craters have mounds encircled by moats. If a large-scale sedimentary layer blankets a crater, then as the layer recedes across the crater it will erode more toward the edges of the crater, resulting in a crescent-shaped moat. When a 160 km diameter mound-hosting crater is subject to a prevailing wind, the surface wind stress is stronger on the leeward side than on the windward side. This results in the center of the mound appearing to "march upwind" over time and forming a "bat-wing" shape, as is observed for Mount Sharp in Gale crater.

An assessment of radon in groundwater in New York State

USGS Publications Warehouse

Shaw, Stephen B.; Eckhardt, David A.V.

2012-01-01

Abstract: A set of 317 samples collected from wells throughout New York State (excluding Long Island) from 2003 through 2008 was used to assess the distribution of radon gas in drinking water. Previous studies have documented high concentrations of radon in groundwater from granitic and metamorphic bedrock, but there have been only limited characterizations of radon in water from sedimentary rock and unconsolidated sand-and-gravel deposits in New York. Approximately 8% of the samples from bedrock wells exceed 89 Bq L-1 (eight times the proposed regulatory limit), but only 2% of samples from sand-and-gravel wells exceed 44 Bq L-1. Specific metamorphic and sedimentary rock formations in New York are associated with the high radon concentrations, indicating that specific areas of New York could be targeted with efforts to reduce the risk of exposure to radon in groundwater. Additionally, radon in groundwater from the sand-and-gravel aquifers was found to be directly correlated to radon in indoor air when assessed by county.

Preliminary report on the ground-water resources of the Klamath River basin, Oregon

USGS Publications Warehouse

Newcomb, Reuben Clair; Hart, D.H.

1958-01-01

The Klamath River basin, including the adjacent Lost River basin, includes about 5,500 square miles of plateaus, mountain-slopes and valley plains in south-central Oregon. The valley plains range in altitude from about 4,100 feet in the south to more than 4,500 feet at the northern end; the mountain and plateau lands rise to an average altitude of 6,000 feet at the drainage divide, some peaks rising above 9,000 feet. The western quarter of the basin is on the eastern slope of the Cascade Range and the remainder consists of plateaus, mountains, and valleys of the basin-and-range type. The rocks of the Klamath River basin range in age from Recent to Mesozoic. At the southwest side of the basin in Oregon, pre-Tertiary metamorphic, igneous, and sedimentary rocks, which form extensive areas farther west, are overlain by sedimentary rocks of Eocene age and volcanic rocks of Eocene and Oligocene age. These early Tertiary rocks dip east toward the central part of the Klamath River basin. The complex volcanic rocks of high Cascades include three units: the lowest unit consists of a sequence of basaltic lava flows about 800 feet thick; the medial unit is composed of volcanic-sedimentary and sedimentary rocksthe Yonna formation200 to 2,000 feet thick; the uppermost unit is a sequence of basaltic lava flows commonly about 200 feet thick. These rocks dip east from the Cascade Range and are the main bedrock formations beneath most of the basin. Extensive pumice deposits, which emanated from ancestral Mount Mazama, cover large areas in the northwestern part of the basin. The basin has an overall synclinal structure open to the south at the California boundary where it continues as the Klamath Lake basin in California. The older rocks dip into the basin in monoclinal fashion from the adjoining drainage basins. The rocks are broken along rudely rectangular nets of closely spaced normal faults, the most prominent set of which trends northwest. The network of fault displacements includes two main grabens, the Klamath and the Langell, which were downthrown approximately 50 and 1,000 feet, respectively. The average annual precipitation varies with the altitude, the higher parts of the Cascade Range getting more than 60 inches, and the semiarid valley plains receive as little as 13 inches in some places. Most precipitation occurs in the winter. The principal tributaries, Williamson and Sprague Rivers, rise near the higher parts of the eastern rim of the basin, flow through narrow valley plains to the western part, and discharge into Upper Klamath Lake. Wood River and associated creeks also empty into Upper Klamath Lake after draining southward along along the eastern foot of the Cascade Range. The Klamath River receives the outflow from Upper Klamath Lake, via Link River and Lake Ewauna, and flows southwestward through Keno Gap and hance through a youthful canyon, to its lower valley in California. The ground water occurs largely in an unconfined, or water-table, condition, though areas of local confinement are present. The regional water table is graded to a base level about equal to that of the major drainage on the valley plains. The slop of the water table, where water is confined, or the piezometric surface is downstream at about the same grade as that of the surface drainage in each of the larger valleys, and ground-water divides occur between the upper parts of adjacent major valleys. The principal water-bearing units are the lower lava rocks and upper lava rocks of the volcanic rocks of high Cascades, the pumice of Quaternary age, and the alluvium. In places layers of coarse fragmental material in the Yonna formation (Newcomb, 1958) also transmit water. The water-bearing units, especially the breccia layers of the lava rocks and the pumice, yield large amounts of water to wells and provide natural discharge outlets for the ground water. The spring outflows to the Williamson and Wood Rivers-Crooked Creek drainage, mea

Statistical tables and charts showing geochemical variation in the Mesoproterozoic Big Creek, Apple Creek, and Gunsight formations, Lemhi group, Salmon River Mountains and Lemhi Range, central Idaho

USGS Publications Warehouse

Lindsey, David A.; Tysdal, Russell G.; Taggart, Joseph E.

2002-01-01

The principal purpose of this report is to provide a reference archive for results of a statistical analysis of geochemical data for metasedimentary rocks of Mesoproterozoic age of the Salmon River Mountains and Lemhi Range, central Idaho. Descriptions of geochemical data sets, statistical methods, rationale for interpretations, and references to the literature are provided. Three methods of analysis are used: R-mode factor analysis of major oxide and trace element data for identifying petrochemical processes, analysis of variance for effects of rock type and stratigraphic position on chemical composition, and major-oxide ratio plots for comparison with the chemical composition of common clastic sedimentary rocks.

Devonian post-orogenic extension-related volcano-sedimentary rocks in the northern margin of the Tibetan Plateau, NW China: Implications for the Paleozoic tectonic transition in the North Qaidam Orogen

NASA Astrophysics Data System (ADS)

Qin, Yu; Feng, Qiao; Chen, Gang; Chen, Yan; Zou, Kaizhen; Liu, Qian; Jiao, Qianqian; Zhou, Dingwu; Pan, Lihui; Gao, Jindong

2018-05-01

The Maoniushan Formation in the northern part of the North Qaidam Orogen (NQO), NW China, contains key information on a Paleozoic change in tectonic setting of the NQO from compression to extension. Here, new zircon U-Pb, petrological, and sedimentological data for the lower molasse sequence of the Maoniushan Formation are used to constrain the timing of this tectonic transition. Detrital zircons yield U-Pb ages of 3.3-0.4 Ga with major populations at 0.53-0.4, 1.0-0.56, 2.5-1.0, and 3.3-2.5 Ga. The maximum depositional age of the Maoniushan Formation is well constrained by a youngest detrital zircon age of ∼409 Ma. Comparing these dates with geochronological data for the region indicates that Proterozoic-Paleozoic zircons were derived mainly from the NQO as well as the Oulongbuluk and Qaidam blocks, whereas Archean zircons were probably derived from the Oulongbuluk Block and the Tarim Craton. The ∼924, ∼463, and ∼439 Ma tectonothermal events recorded in this region indicate that the NQO was involved in the early Neoproterozoic assembly of Rodinia and early Paleozoic microcontinental convergence. A regional angular unconformity between Devonian and pre-Devonian strata within the NQO suggests a period of strong mountain building between the Oulongbuluk and Qaidam blocks during the Silurian, whereas an Early Devonian post-orogenic molasse, evidence of extensional collapse, and Middle to Late Devonian bimodal volcanic rocks and Carboniferous marine carbonate rocks clearly reflect long-lived tectonic extension. Based on these results and the regional geology, we suggest that the Devonian volcano-sedimentary rocks within the NQO were formed in a post-orogenic extensional setting similar to that of the East Kunlun Orogen, indicating that a major tectonic transition from compression to extension in these two orogens probably commenced in the Early Devonian.

Composition of Meridiani Hematite-rich Spherules: A Mass-Balance Mixing-Model Approach

NASA Technical Reports Server (NTRS)

jOLLIFF, b. l.

2005-01-01

One of the great surprises of the Mars Exploration Rovers (MER) mission is the discovery at Meridiani Planum that the surface hematite signature observed from orbit is attributable largely to a surface enrichment of hematite-rich spherules, thought to be concretions, that have weathered out of rocks similar to the underlying sulfate-rich rock formation [1]. A strong hematite signature has been observed by the Mini-TES [2] and by in-situ measurements of spherule-rich targets by the Mossbauer spectrometer (MB) [3] and the alpha-particle X-ray spectrometer (APXS) [4]. The Mini-TES derived spectrum of spherule-rich targets on the plains is consistent with nearly pure coarse-grained hematite, with perhaps as little as 5-10 areal % of other components [2]. The occurrence and abundance of the spherules as the bearer of the widespread hematite signature observed by MGS TES over much of Meridiani Planum is significant for global remote sensing, and their occurrence as concretions in the outcrop lithology is significant for the diagenetic history and role of water in the formation of the sedimentary rock formation [5].

Paleozoic sedimentary rocks in the Red Dog Zn-Pb-Ag district and vicinity, western Brooks Range, Alaska: provenance, deposition, and metallogenic significance

USGS Publications Warehouse

Slack, John F.; Dumoulin, Julie A.; Schmidt, J.M.; Young, L.E.; Rombach, Cameron

2004-01-01

The distribution and composition of Paleozoic strata in the western Brooks Range may have played a fundamental role in Zn-Pb mineralization of the Red Dog district. In our model, deposition and early lithification of biogenic chert and bedded siliceous rocks in the upper part of the Kuna Formation served as a regional hydrologic seal, acting as a cap rock to heat and hydrothermal fluids during Late Mississippian base-metal mineralization. Equally important was the iron-poor composition of black shales of the Kuna Formation (i.e., low Fe/Ti ratios), which limited synsedimentary pyrite formation in precursor sediments, resulting in significant H2S production in pore waters through the interaction of aqueous sulfate with abundant organic matter. This H2S may have been critical to the subsurface deposition of the huge quantities of Zn and Pb in the district. On the basis of this model, we propose that low Fe/Ti and S/C ratios in black shale sequences are potential basin-scale exploration guides for giant sediment-hosted, stratiform Zn-Pb-Ag deposits.

Provenance of sediments from Sumatra, Indonesia - Insights from detrital U-Pb zircon geochronology, heavy mineral analyses and Raman spectroscopy

NASA Astrophysics Data System (ADS)

Liebermann, C.; Hall, R.; Gough, A.

2017-12-01

The island of Sumatra is situated at the southwestern margin of the Indonesian archipelago. Although it is the sixth largest island in the world, the geology of the Sumatra sedimentary basins and their underlying basement is relatively poorly understood in terms of their provenance. This work is a multi-proxy provenance study utilizing U-Pb detrital zircon dating by LA-ICP-MS combined with optical and Raman spectroscopy-based heavy mineral analysis. It will help to unravel the stratigraphy of Sumatra, contribute to paleogeographic reconstruction of western SE Asia, and aid a wider understanding of Sumatran petroleum plays. Thin section analyses, heavy mineral assemblages, and >3500 concordant U-Pb zircon ages, from samples acquired during two fieldwork seasons indicate a mixed provenance for Cenozoic sedimentary formations, including both local igneous sources and mature basement rocks. Characteristic Precambrian zircon age spectra are found in all analysed Cenozoic sedimentary strata. These can be correlated with zircon age populations found in Sumatran basement rocks; Neoproterozoic and Mesoproterozoic age groups are dominant (c. 500-600 Ma, c. 850-1000 Ma, c. 1050-1200 Ma). Paleoproterozoic to Archaean zircons occur as minor populations. The Phanerozoic age spectra of the Cenozoic formations are characterised by distinct Carboniferous, Permo-Triassic, and Jurassic-Cretaceous zircon populations. Permo-Triassic zircons are interpreted to come from granitoids in the Malay peninsula or Sumatra itself. Eocene to Lower Miocene strata are characterised by ultrastable heavy minerals such as zircon, tourmaline, and rutile, which together with garnet, suggest the principal sources were igneous and metamorphic basement rocks. Cenozoic zircons appear only from the Middle Miocene onwards. This change is interpreted to indicate a new contribution from a local volcanic arc, and is supported by the occurrence of unstable heavy minerals such as apatite and clinopyroxene, and the presence of volcanic quartz. The absence of an earlier volcanic contribution is surprising since subduction is widely considered to have been active from the Eocene.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kristiansen, J.I.; Balliny, N.; Saxov, S.

Some available information on thermal conductivity of earth materials from the Scandinavian area is collected. The mean conductivities as reported from individual localities are grouped in crystalline and sedimentary rocks. Mean results are displayed in histograms and localities are mapped. The collocation of conductivity information contains new results of granites and sedimentary rocks from Sweden and of limestones and clays from Danish borings. The new values are presented as histograms of individual measurements and given as mean values with standard errors of mean. The crystalline rocks range from about 2 to about 4 W/ (m K), and the sedimentary rocksmore » range from about 0.8 to about 6 W/ (m K).« less

Sedimentary masses and concepts about tectonic processes at underthrust ocean margins ( subduction).

USGS Publications Warehouse

Scholl, D. W.; von Huene, Roland E.; Vallier, T.L.; Howell, D.G.

1980-01-01

Tectonic processes associated with subduction of oceanic crust, but unrelated to the collision of thick crustal masses or microplates, are presumed by many geologists to significantly affect the formation and deformation of large sedimentary bodies at underthrust ocean margins. More geologists are familiar with the concept of subduction accretion than with other noncollision processes - for example, sediment subduction, subduction erosion, and subduction kneading. In our opinion, no single subduction-related tectonic process is the dominant or typical one that forges the geologic framework of modern underthrust ocean margins. It is likely, therefore, that the rock records of ancient underthrust margins are preserved in a multitude of structural and stratigraphic forms.-from Authors

Geologic map of the Lower Valley quadrangle, Caribou County, Idaho

USGS Publications Warehouse

Oberlindacher, H. Peter; Hovland, R. David; Miller, Susan T.; Evans, James G.; Miller, Robert J.

2018-04-05

The Lower Valley 7.5-minute quadrangle, located in the core of the Southeast Idaho Phosphate Resource Area, includes Mississippian to Triassic marine sedimentary rocks, Pliocene to Pleistocene basalt, and Tertiary to Holocene surficial deposits. The Mississippian to Triassic marine sedimentary sequence was deposited on a shallow shelf between an emergent craton to the east and the Antler orogenic belt to the west. The Meade Peak Phosphatic Shale Member of the Permian Phosphoria Formation hosts high-grade deposits of phosphate that were the subject of geologic studies through much of the 20th century. Open-pit mining of the phosphate has been underway within and near the Lower Valley quadrangle for several decades.

Age and speciation of iodine in groundwater and mudstones of the Horonobe area, Hokkaido, Japan: Implications for the origin and migration of iodine during basin evolution

NASA Astrophysics Data System (ADS)

Togo, Yoko S.; Takahashi, Yoshio; Amano, Yuki; Matsuzaki, Hiroyuki; Suzuki, Yohey; Terada, Yasuko; Muramatsu, Yasuyuki; Ito, Kazumasa; Iwatsuki, Teruki

2016-10-01

This paper reports the concentration, speciation and isotope ratio (129I/127I) of iodine from both groundwater and host rocks in the Horonobe area, northern Hokkaido, Japan, to clarify the origin and migration of iodine in sedimentary rocks. Cretaceous to Quaternary sedimentary rocks deposited nearly horizontally in Tenpoku Basin and in the Horonobe area were uplifted above sea level during active tectonics to form folds and faults in the Quaternary. Samples were collected from the Pliocene Koetoi and late Miocene Wakkanai formations (Fms), which include diatomaceous and siliceous mudstones. The iodine concentration in groundwater, up to 270 μmol/L, is significantly higher than that of seawater, with the iodine enrichment factor relative to seawater reaching 800-1500. The iodine concentration in the rocks decreases from the Koetoi to Wakkanai Fms, suggesting that iodine was released into the water from the rocks of deeper formations. The iodine concentration in the rocks is sufficiently high for forming iodine-rich groundwater as found in this area. X-ray absorption near edge structure (XANES) analysis shows that iodine exists as organic iodine and iodide (I-) in host rocks, whereas it exists mainly as I- in groundwater. The isotope ratio is nearly constant for iodine in the groundwater, at [0.11-0.23] × 10-12, and it is higher for iodine in rocks, at [0.29-1.1] × 10-12, giving iodine ages of 42-60 Ma and 7-38 Ma, respectively. Some iodine in groundwater must have originated from Paleogene and even late Cretaceous Fms, which are also considered as possible sources of oil and gas, in view of the old iodine ages of the groundwater. The iodine ages of the rocks are older than the depositional ages, implying that the rocks adsorbed some iodine from groundwater, which was sourced from greater depths. The iodine concentration in groundwater decreases with decreasing chlorine concentration due to mixing of iodine-rich connate water and meteoric water. A likely scenario is that iodine-rich brine formed during the long-term basin evolution from the Cretaceous to Quaternary and that this brine was diluted by mixing with meteoric water during uplifting and denudation of the area.

Bioerosion by pit-forming, temperate-reef sea urchins: History, rates and broader implications.

PubMed

Russell, Michael P; Gibbs, Victoria K; Duwan, Emily

2018-01-01

Sea urchins are dominant members of rocky temperate reefs around the world. They often occur in cavities within the rock, and fit so tightly, it is natural to assume they sculpted these "pits." However, there are no experimental data demonstrating they bore pits. If they do, what are the rates and consequences of bioerosion to nearshore systems? We sampled purple sea urchins, Strongylocentrotus purpuratus, from sites with four rock types, three sedimentary (two sandstones and one mudstone) and one metamorphic (granite). A year-long experiment showed urchins excavated depressions on sedimentary rocks in just months. The rate of pit formation varied with rock type and ranged from <5 yr for medium-grain sandstone to >100 yr for granite. In the field, there were differences in pit size and shapes of the urchins (height:diameter ratio). The pits were shallow and urchins flatter at the granite site, and the pits were deeper and urchins taller at the sedimentary sites. Although overall pit sizes were larger on mudstone than on sandstone, urchin size accounted for this difference. A second, short-term experiment, showed the primary mechanism for bioerosion was ingestion of the substratum. This experiment eliminated potential confounding factors of the year-long experiment and yielded higher bioerosion rates. Given the high densities of urchins, large amounts of rock can be converted to sediment over short time periods. Urchins on sandstone can excavate as much as 11.4 kg m-2 yr-1. On a broader geographic scale, sediment production can exceed 100 t ha-1 yr-1, and across their range, their combined bioerosion is comparable to the sediment load of many rivers. The phase shift between urchin barrens and kelp bed habitats in the North Pacific is controlled by the trophic cascade of sea otters. By limiting urchin populations, these apex predators also may indirectly control a substantial component of coastal rates of bioerosion.

Bioerosion by pit-forming, temperate-reef sea urchins: History, rates and broader implications

PubMed Central

Gibbs, Victoria K.; Duwan, Emily

2018-01-01

Sea urchins are dominant members of rocky temperate reefs around the world. They often occur in cavities within the rock, and fit so tightly, it is natural to assume they sculpted these “pits.” However, there are no experimental data demonstrating they bore pits. If they do, what are the rates and consequences of bioerosion to nearshore systems? We sampled purple sea urchins, Strongylocentrotus purpuratus, from sites with four rock types, three sedimentary (two sandstones and one mudstone) and one metamorphic (granite). A year-long experiment showed urchins excavated depressions on sedimentary rocks in just months. The rate of pit formation varied with rock type and ranged from <5 yr for medium-grain sandstone to >100 yr for granite. In the field, there were differences in pit size and shapes of the urchins (height:diameter ratio). The pits were shallow and urchins flatter at the granite site, and the pits were deeper and urchins taller at the sedimentary sites. Although overall pit sizes were larger on mudstone than on sandstone, urchin size accounted for this difference. A second, short-term experiment, showed the primary mechanism for bioerosion was ingestion of the substratum. This experiment eliminated potential confounding factors of the year-long experiment and yielded higher bioerosion rates. Given the high densities of urchins, large amounts of rock can be converted to sediment over short time periods. Urchins on sandstone can excavate as much as 11.4 kg m-2 yr-1. On a broader geographic scale, sediment production can exceed 100 t ha-1 yr-1, and across their range, their combined bioerosion is comparable to the sediment load of many rivers. The phase shift between urchin barrens and kelp bed habitats in the North Pacific is controlled by the trophic cascade of sea otters. By limiting urchin populations, these apex predators also may indirectly control a substantial component of coastal rates of bioerosion. PMID:29466357

Rock property measurements and analysis of selected igneous, sedimentary, and metamorphic rocks from worldwide localities

USGS Publications Warehouse

Johnson, Gordon R.

1983-01-01

Dry bulk density and grain density measurements were made on 182 samples of igneous, sedimentary, and metamorphic rocks from various world-wide localities. Total porosity values and both water-accessible and helium-accessible porosities were calculated from the density data. Magnetic susceptibility measurements were made on the solid samples and permeability and streaming potentials were concurrently measured on most samples. Dry bulk densities obtained using two methods of volume determination, namely direct measurement and Archlmedes principle, were nearly equivalent for most samples. Grain densities obtained on powdered samples were typically greater than grain densities obtained on solid samples, but differences were usually small. Sedimentary rocks had the highest percentage of occluded porosity per rock volume whereas metamorphic rocks had the highest percentage of occluded porosity per total porosity. There was no apparent direct relationship between permeability and streaming potential for most samples, although there were indications of such a relationship in the rock group consisting of granites, aplites, and syenites. Most rock types or groups of similar rock types of low permeability had, when averaged, comparable levels of streaming potential per unit of permeability. Three calcite samples had negative streaming potentials.

Polygon/Cracked Sedimentary Rock

NASA Technical Reports Server (NTRS)

2004-01-01

4 December 2004 Exposures of sedimentary rock are quite common on the surface of Mars. Less common, but found in many craters in the regions north and northwest of the giant basin, Hellas, are sedimentary rocks with distinct polygonal cracks in them. This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows an example from the floor of an unnamed crater near 21.0oS, 311.9oW. Such cracks might have formed by desiccation as an ancient lake dried up, or they might be related to ground ice freeze/thaw cycles or some other stresses placed on the original sediment or the rock after it became lithified. The 300 meter scale bar is about 328 yards long. The scene is illuminated by sunlight from the upper left.

Petrography, geochemistry, and tectonics of a rifted fragment of Mainland Asia: evidence from the Lasala Formation, Mindoro Island, Philippines

NASA Astrophysics Data System (ADS)

Concepcion, R. A. B.; Dimalanta, C. B.; Yumul, G. P.; Faustino-Eslava, D. V.; Queaño, K. L.; Tamayo, R. A.; Imai, A.

2012-01-01

Petrological and geochemical investigations of the sedimentary Lasala formation in northwest Mindoro, Philippines, offer new insights into the origin of this geologically contentious region. Mindoro island's position at the boundary between Sundaland and the Philippine Mobile Belt has led to variable suggestions as to how much of it is continent derived or not. The Eocene Lasala formation overlies the Jurassic Halcon metamorphics, a regionally metamorphosed suite generally thought to have formed as a result of arc-continent collision processes. The sedimentary formation consists mainly of sandstones and shales interbedded with mudstones, basalt flows, and subordinate limestones and conglomerates. Petrographic information on the Lasala clastic rocks demonstrates a uniform framework composition that is predominantly quartzose. Major oxide, trace element abundances, and various elemental ratios similarly impart a strongly felsic signature. These characteristics are taken to indicate a chiefly continental, passive margin derivation and deposition of the Lasala sediments during the Eocene. The weak indication of active margin influence is suggested to be an inherited signature, supported by paleogeographic models of the southeastern Asian margin area during the pre-Cenozoic.

Post-middle Miocene accretion of Franciscan rocks, northwestern California.

USGS Publications Warehouse

McLaughlin, R.J.; Kling, S.A.; Poore, R.Z.; McDougall, K.; Beutner, E.C.

1982-01-01

Deformed sedimentary rocks assigned to the Franciscan assemblage in the King Range S of Cape Mendocino, N California, are dominantly deep-water argillite and sandstone occurring as thick- to thin-bedded, locally channelized marine turbidities of arkosic to andesitic volcaniclastic composition. The King Range appears to be a displaced terrane of oceanic basement overlain by Palaeogene(?) and Neogene sedimentary and igneous rocks of continental and oceanic derivation.-Authors

Mineral resource potential map of the James River Face Wilderness, Bedford and Rockbridge counties, Virginia

USGS Publications Warehouse

Brown, C. Erwin; Gazdik, Gertrude C.

1982-01-01

The rocks in the James River Face Wilderness are shales and quartzites that overlie a meta-igneous basement. They are folded into a large southwestward-plunging anticline that is cut off on the east and south by an extensive thrust fault that brings old basement rocks over the younger sedimentary rocks. Geochemical studies of stream sediments, soils, and rocks do not reveal any unusually high metal concentrations, but a large resource of metallurgical-grade quartzite and shale suitable for structural clay products and lightweight aggregate is in the wilderness. Antietam (Erwin) Quartzite has been quarried at three sites in the wilderness as raw material for silicon used in the manufacture of ferrosilicon. Other uses included crushed rock for concrete aggregate, road metal, and railroad ballast, and sand for cement and mortar. Potential uses include ganister for silica brick and specialty sands such as filter and furnace sand. Firing tests on samples of shale from the Harpers (Hampton) Formation show that it could be used for the manufacture of brick and as lightweight aggregate. Of marginal economic interest are heavy-mineral layers in the basal Unicoi (Weverton) Formation.

Regional stratigraphy, sedimentology, and tectonic significance of Oligocene-Miocene sedimentary and volcanic rocks, northern Baja California, Mexico

NASA Astrophysics Data System (ADS)

Dorsey, Rebecca J.; Burns, Beverly

1994-01-01

Upper Oligocene (?) to middle Miocene sedimentary and volcanic rocks in northern Baja California were deposited along the western margin of North America during subduction of the Guadalupe plate and southward migration of the Rivera Triple Junction. Regional mapping and compilation of stratigraphic data reveal a sequence of three regionally traceable stratigraphic units. (1) Oligocene (?) to lower Miocene Mesa Formation: basal quartz-rich fluvial sandstone, grus, conglomerate, and accessory facies, whose detrital compositions reflect the composition of local pre-Tertiary basement rock. (2) Lower to middle Miocene Comondú Formation: laterally variable sequence of volcaniclastic conglomerate, breccia, sandstone, tuff and minor volcanic flow units. (3) Widespread mesa-capping rhyolite tuff, typically welded and crystal-rich, probably upper Miocene in age. The Mesa Formation overlies a highly irregular and deeply dissected erosional surface developed on pre-Tertiary basement rock. The shift from pre-Mesa erosion to widespread (though localized) deposition and valley-filling records the final phase of late Cretaceous to middle Tertiary regional subsidence and eastward transgression that resulted from slow cooling and thermal contraction of Cretaceous arc crust during a temporal gap in magmatic activity along the western Cordilleran margin. Nonmarine sediments of the Mesa Formation were deposited in small, steep-walled paleovalleys and basins that gradually filled and evolved to form through-going, low-energy ephemeral stream systems. The gradational upward transition from the Mesa to Comondú Formation records the early to middle Miocene onset of subduction-related arc magmatism in eastern Baja California and related westward progradation of alluvial volcaniclastic aprons shed from high-standing eruptive volcanic centers. Pre-existing streams were choked with the new influx of volcanic detritus, causing the onset of rapid sediment deposition by stream flows and dilute to viscous sediment gravity flows. Deposits of the Comondú Formation thin and fine systematically westward, from proximal volcanic conglomerate and breccia with thin basalt and andesite flows in the east, to distal volcaniclastic fluvial sandstone in the west. These proximal—distal relationships help to define the location and paleogeography of active arc-flanking volcaniclastic alluvial aprons of the Miocene magmatic arc in northern Baja California. A substantial late Miocene drop in regional base level (relative sea level) is best attributed to regional uplift caused by the renewal of magmatic and thermal activity in northern Baja California, which has continued to the present day.

Map and interpretation of aeromagnetic data for the Wild Rogue Wilderness, Coos and Curry Counties, Oregon

USGS Publications Warehouse

Blakely, Richard J.; Senior, Lisa

1983-01-01

The mapped geology of the Wild Rogue Wilderness (Gray and others, 1982) consists of a tectonic wedge of volcanic and intrusive rocks of Jurassic age surrounded on all sides by thick sequences of Jurassic, Creacetous, and Tertiary sedimentary rocks. Normally, volcanic and intrusive rocks are more magnetic than sedimentary rocks, a property which should be reflected by the areomagnetic data. We conclude, however, that most of the magnetic anomalies of the Wild Rogue Wilderness are caused by magnetic rocks that are not exposed but which occur at relatively shallow depth below the topographic surface. 

PRo3D®: A Tool for High Resolution Rendering and Geological Analysis of Martian Rover-Derived Digital Outcrop Models.

NASA Astrophysics Data System (ADS)

Gupta, S.; Barnes, R.; Ortner, T.; Huber, B.; Paar, G.; Muller, J. P.; Giordano, M.; Willner, K.; Traxler, C.; Juhart, K.; Fritz, L.; Hesina, G.; Tasdelen, E.

2015-12-01

NASA's Mars Exploration Rovers (MER) and Mars Science Laboratory Curiosity Rover (MSL) are proxies for field geologists on Mars, taking high resolution imagery of rock formations and landscapes which is analysed in detail on Earth. Panoramic digital cameras (PanCam on MER and MastCam on MSL) are used for characterising the geology of rock outcrops along rover traverses. A key focus is on sedimentary rocks that have the potential to contain evidence for ancient life on Mars. Clues to determine ancient sedimentary environments are preserved in layer geometries, sedimentary structures and grain size distribution. The panoramic camera systems take stereo images which are co-registered to create 3D point clouds of rock outcrops to be quantitatively analysed much like geologists would do on Earth. The EU FP7 PRoViDE project is compiling all Mars rover vision data into a database accessible through a web-GIS (PRoGIS) and 3D viewer (PRo3D). Stereo-imagery selected in PRoGIS can be rendered in PRo3D, enabling the user to zoom, rotate and translate the 3D outcrop model. Interpretations can be digitised directly onto the 3D surface, and simple measurements can be taken of the dimensions of the outcrop and sedimentary features. Dip and strike is calculated within PRo3D from mapped bedding contacts and fracture traces. Results from multiple outcrops can be integrated in PRoGIS to gain a detailed understanding of the geological features within an area. These tools have been tested on three case studies; Victoria Crater, Yellowknife Bay and Shaler. Victoria Crater, in the Meridiani Planum region of Mars, was visited by the MER-B Opportunity Rover. Erosional widening of the crater produced <15 m high outcrops which expose ancient Martian eolian bedforms. Yellowknife Bay and Shaler were visited in the early stages of the MSL mission, and provide excellent opportunities to characterise Martian fluvio-lacustrine sedimentary features. Development of these tools is crucial to exploitation of vision data from future missions, such as the 2018 ExoMars Rover and the NASA 2020 mission. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 312377 PRoViDE.

Middle Jurassic Topawa group, Baboquivari Mountains, south-central Arizona: Volcanic and sedimentary record of deep basins within the Jurassic magmatic arc

USGS Publications Warehouse

Haxel, G.B.; Wright, J.E.; Riggs, N.R.; Tosdal, R.M.; May, D.J.

2005-01-01

Among supracrustal sequences of the Jurassic magmatic arc of the southwestern Cordillera, the Middle Jurassic Topawa Group, Baboquivari Mountains, south-central Arizona, is remarkable for its lithologic diversity and substantial stratigraphic thickness, ???8 km. The Topawa Group comprises four units (in order of decreasing age): (1) Ali Molina Formation-largely pyroclastic rhyolite with interlayered eolian and fluvial arenite, and overlying conglomerate and sandstone; (2) Pitoikam Formation-conglomerate, sedimentary breccia, and sandstone overlain by interbedded silt- stone and sandstone; (3) Mulberry Wash Formation-rhyolite lava flows, flow breccias, and mass-flow breccias, with intercalated intraformational conglomerate, sedimentary breccia, and sandstone, plus sparse within-plate alkali basalt and comendite in the upper part; and (4) Tinaja Spring Porphyry-intrusive rhyolite. The Mulberry Wash alkali basalt and comendite are genetically unrelated to the dominant calcalkaline rhyolite. U-Pb isotopic analyses of zircon from volcanic and intrusive rocks indicate the Topawa Group, despite its considerable thickness, represents only several million years of Middle Jurassic time, between approximately 170 and 165 Ma. Sedimentary rocks of the Topawa Group record mixing of detritus from a minimum of three sources: a dominant local source of porphyritic silicic volcanic and subvolcanic rocks, identical or similar to those of the Topawa Group itself; Meso- proterozoic or Cambrian conglomerates in central or southeast Arizona, which contributed well-rounded, highly durable, polycyclic quartzite pebbles; and eolian sand fields, related to Middle Jurassic ergs that lay to the north of the magmatic arc and are now preserved on the Colorado Plateau. As the Topawa Group evidently represents only a relatively short interval of time, it does not record long-term evolution of the Jurassic magmatic arc, but rather represents a Middle Jurassic "stratigraphic snapshot" of the arc. This particular view of the arc has been preserved primarily because the Topawa Group accumulated in deep intra-arc basins. These nonmarine basins were fundamentally tectonic and extensional, rather than volcano-tectonic, in origin. Evidence from the Topawa Group supports two previous paleogeographic inferences: the Middle Jurassic magmatic arc in southern Arizona was relatively low standing, and externally derived sediment was introduced into the arc from the continent (northeast) side, without appreciable travel along the arc. We speculate that because the Topawa Group intra-arc basins were deep and rapidly subsiding, they became the locus of a major (though probably intermittent) fluvial system, which flowed into the low-standing magmatic arc from its northeast flank. ?? 2005 Geological Society of America.

Geologic Map of the Weaverville 15' Quadrangle, Trinity County, California

USGS Publications Warehouse

Irwin, William P.

2009-01-01

The Weaverville 15' quadrangle spans parts of five generally north-northwest-trending accreted terranes. From east to west, these are the Eastern Klamath, Central Metamorphic, North Fork, Eastern Hayfork, and Western Hayfork terranes. The Eastern Klamath terrane was thrust westward over the Central Metamorphic terrane during early Paleozoic (Devonian?) time and, in Early Cretaceous time (approx. 136 Ma), was intruded along its length by the massive Shasta Bally batholith. Remnants of overlap assemblages of the Early Cretaceous (Hauterivian) Great Valley sequence and the Tertiary Weaverville Formation cover nearly 10 percent of the quadrangle. The base of the Eastern Klamath terrane in the Weaverville quadrangle is a peridotite-gabbro complex that probably is correlative to the Trinity ophiolite (Ordovician), which is widely exposed farther north beyond the quadrangle. In the northeast part of the Weaverville quadrangle, the peridotite-gabbro complex is overlain by the Devonian Copley Greenstone and the Mississippian Bragdon Formation. Where these formations were intruded by the Shasta Bally batholith, they formed an aureole of gneissic and other metamorphic rocks around the batholith. Westward thrusting of the Eastern Klamath terrane over an adjacent body of mafic volcanic and overlying quartzose sedimentary rocks during Devonian time formed the Salmon Hornblende Schist and the Abrams Mica Schist of the Central Metamorphic terrane. Substantial beds of limestone in the quartzose sedimentary unit, generally found near the underlying volcanic rock, are too metamorphosed for fossils to have survived. Rb-Sr analysis of the Abrams Mica Schist indicates a metamorphic age of approx. 380 Ma. West of Weavervillle, the Oregon Mountain outlier of the Eastern Klamath terrane consists mainly of Bragdon Formation(?) and is largely separated from the underlying Central Metamorphic terrane by serpentinized peridotite that may be a remnant of the Trinity ophiolite. The North Fork terrane is faulted against the west edge of the Central Metamorphic terrane, and its northerly trend is disrupted by major left-lateral offsets along generally west-northwest-trending faults. The serpentinized peridotite-gabbro complex that forms the western base of the terrane is the Permian North Fork ophiolite, which to the east is overlain by broken formation of mafic-volcanic rocks, red chert, siliceous tuff, argillite, minor limestone, and clastic sedimentary rocks. The chert and siliceous tuff contain radiolarians of Permian and Mesozoic ages, and some are as young as Early Jurassic (Pliensbachian). Similar Pliensbachian radiolarians are found in Franciscan rocks of the Coast Ranges. The Eastern Hayfork terrane is broken formation and melange of mainly chert, sandstone, argillite, and various exotic blocks. The cherts yield radiolarians of Permian and Triassic ages but none of clearly Jurassic age. Limestone bodies of the Eastern Hayfork terrane contain Permian microfaunas of Tethyan affinity. The Western Hayfork terrane, exposed only in a small area in the southwestern part of the quadrangle, consists dominantly of mafic tuff and dark slaty argillite. Sparse paleontologic data indicate a Mesozoic age for the strata. The terrane includes small bodies of diorite that are related to the nearby Wildwood pluton of Middle Jurassic age and probably are related genetically to the stratified rocks. The terrane is interpreted to be the accreted remnants of a Middle Jurassic volcanic arc. Shortly after intrusion by Shasta Bally batholith (approx. 136 Ma), much of the southern half of the Weaverville quadrangle was overlapped by Lower Cretaceous, dominantly Hauterivian, marine strata of the Great Valley sequence, and to a lesser extent later during Oligocene and (or) Miocene time by fluvial and lacustrine deposits of the Weaverville Formation. This map of the Weaverville Quadrangle is a digital rendition of U.S. Geological Survey Miscellaneous Field

Peruvian Arid Coast and Agriculture, South America

NASA Technical Reports Server (NTRS)

1991-01-01

The coast of Peru, between the Pacific Ocean and the Andes Mountains is very arid (16.5S, 72.5W). For several thousand years, water from numerous small streams has been used for traditional flood and canal irrigation agriculture. However, during the past decade innovative techniques have tapped new water sources for increased agricultural production. Ground water in the porous sedimentary rock formations has been tapped for well irrigation agriculture.

The onset of fabric development in deep marine sediments

NASA Astrophysics Data System (ADS)

Maffione, Marco; Morris, Antony

2017-09-01

Post-depositional compaction is a key stage in the formation of sedimentary rocks that results in porosity reduction, grain realignment and the production of sedimentary fabrics. The progressive time-depth evolution of the onset of fabric development in deep marine sediments is poorly constrained due to the limited quantity and resolution of existing data. Here we present high-resolution anisotropy of magnetic susceptibility (AMS) results from clay-rich deep marine sediments recovered at International Ocean Discovery Program Site U1438 (Philippine Sea). AMS is a petrofabric tool sensitive to the preferred orientation of grains in rocks. Down-section variations of AMS parameters, density, porosity and the inclination of magnetic remanences demonstrate that fabrics develop in response to compaction and dewatering but also that they do not develop progressively with depth below the mudline. Instead, a horizontal foliation first forms at 83 mbsf once the sediment load reaches an effective stress threshold for the onset of compaction and is then continuously enhanced down to 113 mbsf, defining a 30 m-thick 'initial compaction window'. The magnetostratigraphic age model for IODP Site U1438 indicates a delay of 5.7 Ma in initial fabric formation following sediment deposition, with strongly defined fabrics then taking an additional 6.5 Ma to develop.

Karst connections between unconfined aquifers and the Upper Floridan aquifer in south Georgia: geophysical evidence and hydrogeological models

NASA Astrophysics Data System (ADS)

Thieme, D. M.; Denizman, C.

2011-12-01

Buried karst features in sedimentary rocks of the south Georgia Coastal Plain present a challenge for hydrogeological models of recharge and confined flow within the underlying Upper Floridan aquifer. The Withlacoochee River, the trunk stream for the area, frequently disappears into subsurface caverns as it makes its way south to join the Suwannee River in northern Florida. The Withlacoochee also receives inputs from small ponds and bays which in turn receive spring and seep groundwater inputs. We have mapped karst topography at the "top of rock" using ground-penetrating radar (GPR). Up to seven meters of relief is indicated for the paleotopography on Miocene to Pliocene rocks, contrasting with the more subdued relief of the modern landscape. Current stratigraphic and hydrogeological reconstructions do not incorporate this amount of relief or lateral variation in the confining beds. One "pipe" which is approximately four meters in diameter is being mapped in detail. We have field evidence at this location for rapid movement of surficial pond and river water with a meteoric signature through several separate strata of sedimentary rock into an aquifer in the Hawthorn formation. We use our geophysical and hydrological field evidence to constrain quantitative hydrogeological models for the flow rates into and out of both this upper aquifer and the underlying Upper Floridan aquifer, which is generally considered to be confined by the clays of the Hawthorn.

Geology of the north end of the Ruby Range, southwestern Montana

USGS Publications Warehouse

Tysdal, Russell G.

1970-01-01

This study consists of two parts: stratigraphy and sedimentation, and structure of rocks in the northern one-third of the Ruby Range of southwestern Montana. Detailed studies of Cambrian marine dolomite rocks in the Red Lion Formation and in the upper part of the Pilgrim Limestone resulted in their division into distinct rock units, termed lithofacies. These lithofacies contain features suggestive of subtidal, intertidal, and supratidal environments similar to those presently forming in the Persian Gulf. Stromatolltic structures occurring in the uppermost part of the Red Lion Formation are similar to those presently forming in Shark Bay, Australia. The Ruby Range within the map area is broken into a series of northwest-plunging basement (Precambrian metamorphic rock) blocks, differentially uplifted during the Cretaceous-Tertiary orogenic period. These blocks are bordered by upthrust faults, which are nearly vertical in their lower segments and are .low-angle in their uppermost parts. Asymmetrical folds in Paleozoic sedimentary rocks formed in response to the differential uplift of the blocks; thus they too plunge to the northwest. Displaced masses of rock border the range on the three sides within the map area and are interpreted as gravity-slide features resulting from uplift of the range. Normal faulting began blocking out the present range margins by Oligocene time.

ELLICOTT ROCK WILDERNESS AND ADDITIONS, SOUTH CAROLINA, NORTH CAROLINA, AND GEORGIA.

USGS Publications Warehouse

Bell, Henry; Gazdik, Gertrude C.

1984-01-01

A mineral survey was made of the Ellicott Rock Wilderness and additions located in the common corner of South Carolina, North Carolina, and Georgia. Surveys along the rivers, streams, and ridges indicated that there is little promise for the occurrence of metallic mineral or energy resources. Deeply buried sedimentary rocks have an unknown potential for hydrocarbons, probably gas. Until some deep drilling is done to test these deep sedimentary rocks no reasonable estimate of gas potential can be made, but it cannot be totally discounted.

Geology of quadrangles H-12, H-13, and parts of I-12 and I-13, (zone III) in northeastern Santander Department, Colombia

USGS Publications Warehouse

Ward, Dwight Edward; Goldsmith, Richard; Cruz, Jaime B.; Restrepo, Hernan A.

1974-01-01

A program of geologic mapping and mineral investigation in Colombia was undertaken cooperatively by the Colombian Instituto Nacional de Investigaciones Geologico-Mineras (formerly known as the Inventario Minero Nacional), and the U. S. Geological Survey; by the Government of Colombia and the Agency for International Development, U. S. Department of State. The purpose was to study, and evaluate mineral resources (excluding of petroleum, coal, emeralds, and alluvial gold) of four selected areas, designated Zones I to IV, that total about 70,000 km2. The work in Zone III, in the Cordillera Oriental, was done from 1965 to 1968. The northeast trend of the Cordillera Oriental of Colombia swings abruptly to north-northwest in the area of this report, and divides around the southern end of the Maracaibo Basin. This section of the Cordillera Oriental is referred to as the Santander Massif. Radiometric age determinations indicate that the oldest rocks of the Santander massif are Precambrian and include high-grade gneiss, schist, and migmatite of the Bucaramanga Formation. These rocks were probably part of the Precambrian Guayana Shield. Low- to medium-grade metamorphic rocks of late Precambrian to Ordovician age .include phyllite, schist, metasiltstone, metasandstone, and marble of the Silgara Formation, a geosynclinal series of considerable extent in the Cordillera Oriental and possibly the Cordillera de Merida of Venezuela. Orthogneiss ranging from granite to tonalite is widely distributed in the high- and medium-grade metamorphic rocks of the central core of the massif and probably represents rocks of two ages, Precambrian and Ordovician to Early Devonian. Younger orthogneiss and the Silgara are overlain by Middle Devonian beds of the Floresta Formation which show a generally low but varying degree of metamorphism. Phyllite and argillite are common, and infrequent marble and other calcareous beds are fossiliferous. Except for recrystallization in limestones of !the Permian-Carboniferous Diamante Formation, sedimentary rocks younger than Devonian are unmetamorphosed. The effects of Precambrian regional dynamothermal metamorphism and plutonism on Precambrian geosynclinal deposits reached the upper amphibolite facies in the Bucaramanga Gneiss. The geosynclinal Silgara Formation was subjected to similar conditions in Late Ordovician and Early Silurian time but reached only the greenschist or lower amphibolite facies. Orthogneisses generally show a concordance of foliation and lineation with the neighboring Silgara Formation and the Bucaramanga Gneiss as well as similarities in grade of metamorphism. Regional dynamothermal metamorphism in Late Permian and Triassic time reached, low grade in the Floresta Formation and caused recrystallization of limestone of the Diamante Formation. The Bucaramanga and Silgara metamorphic rocks show evidence of metrogressive metamorphism accompanied by high activity or potassium and water, but whether this occurred at the time the Floresta was metamorphosed or later is not clear. Batholiths, plutons, and stocks of igneous rocks in the Santander massif range from diorite to granite. Radioactive age data indicate that most belong to a single plutonic interval. These are referred to as the Santander Plutoniq Group and are Jurassic and Jurassic-Triassic- Two suites of this group are pink granite and quartz monzonite, and gray quartz monzonite and granodiorite. Contact relations indicate that the pink and more granitic rocks are younger than the gray and more mafic rocks, but radioactive age data are in conflict with this. Undated plutonic rocks that are not clearly related to the group are assigned to relatively older or younger age positions. West of the Bucanamanga fault rhyolite makes up a small body at one locality and forms an intrusive sheet with granophyre and intrusive breccias in Triassic sedimentary rocks at another locality. Its age is unknown, but it probably is younger than the

Analysis of ERTS-1 imagery and its application to evaluation of Wyoming's natural resources

NASA Technical Reports Server (NTRS)

Houston, R. S. (Principal Investigator); Marrs, R. W.

1973-01-01

The author has identified the following significant results. Significant results of the Wyoming ERTS-1 investigation during the first six months (July-December 1972) included: (1) successful segregation of Precambrian metasedimentary/metavolcanic rocks from igneous rocks, (2) discovery of iron formation within the metasedimentary sequence, (3) mapping of previously unreported tectonic elements of major significance, (4) successful mapping of large scale fracture systems of the Wind River Mountains, (5) successful distinction of some metamorphic, igneous, and sedimentary lithologies by color additive viewing, (6) mapping of large scale glacial features, and (7) development of techniques for mapping small urban areas.

Analysis of ERTS-1 imagery of Wyoming and its application to evaluation of Wyoming's natural resources

NASA Technical Reports Server (NTRS)

Marrs, R. W.

1973-01-01

The author has identified the following significant results. Significant results of the Wyoming investigation during the first six months include: (1) successful segregation of Precambrian metasedimentary/metavolcanic rocks from igneous rocks; (2) discovery of iron formation within the metasedimentary sequence; (3) mapping of previously unreported tectonic elements of major significance; (4) successful mapping of large scale fractures of the Wind River Mountains; (5) sucessful distinction of some metamorphic, igneous, and sedimentary lithologies by color-additive viewing of ERTS images; (6) mapping and interpretation of glacial features in western Wyoming; and (7) development of techniques for mapping small urban areas.

1-D/3-D geologic model of the Western Canada Sedimentary Basin

USGS Publications Warehouse

Higley, D.K.; Henry, M.; Roberts, L.N.R.; Steinshouer, D.W.

2005-01-01

The 3-D geologic model of the Western Canada Sedimentary Basin comprises 18 stacked intervals from the base of the Devonian Woodbend Group and age equivalent formations to ground surface; it includes an estimated thickness of eroded sediments based on 1-D burial history reconstructions for 33 wells across the study area. Each interval for the construction of the 3-D model was chosen on the basis of whether it is primarily composed of petroleum system elements of reservoir, hydrocarbon source, seal, overburden, or underburden strata, as well as the quality and areal distribution of well and other data. Preliminary results of the modeling support the following interpretations. Long-distance migration of hydrocarbons east of the Rocky Mountains is indicated by oil and gas accumulations in areas within which source rocks are thermally immature for oil and (or) gas. Petroleum systems in the basin are segmented by the northeast-trending Sweetgrass Arch; hydrocarbons west of the arch were from source rocks lying near or beneath the Rocky Mountains, whereas oil and gas east of the arch were sourced from the Williston Basin. Hydrocarbon generation and migration are primarily due to increased burial associated with the Laramide Orogeny. Hydrocarbon sources and migration were also influenced by the Lower Cretaceous sub-Mannville unconformity. In the Peace River Arch area of northern Alberta, Jurassic and older formations exhibit high-angle truncations against the unconformity. Potential Paleozoic though Mesozoic hydrocarbon source rocks are in contact with overlying Mannville Group reservoir facies. In contrast, in Saskatchewan and southern Alberta the contacts are parallel to sub-parallel, with the result that hydrocarbon source rocks are separated from the Mannville Group by seal-forming strata within the Jurassic. Vertical and lateral movement of hydrocarbons along the faults in the Rocky Mountains deformed belt probably also resulted in mixing of oil and gas from numerous source rocks in Alberta.

Sedimentology of the lower Karoo Supergroup fluvial strata in the Tuli Basin, South Africa

NASA Astrophysics Data System (ADS)

Bordy, Emese M.; Catuneanu, Octavian

2002-11-01

The Karoo Supergroup in the Tuli Basin (South Africa) consists of a sedimentary sequence (˜450-500 m) composed of four stratigraphic units, namely the informal Basal, Middle and Upper Units, and the formal Clarens Formation. The units were deposited in continental settings from approximately Late Carboniferous to Middle Jurassic. This paper focuses on the ˜60-m-thick Basal Unit, which was examined in terms of sedimentary facies and palaeo-environments based on evidence provided by primary sedimentary structures, palaeo-flow measurements, palaeontological findings, borehole data (59 core descriptions) and stratigraphic relations. Three main facies associations have been identified: (i) gravelstone (breccias and conglomerate-breccias), (ii) sandstone and (iii) fine-grained sedimentary rocks. The coarser facies are interpreted as colluvial fan deposits, possibly associated with glaciogenic diamictites. The sandstone facies association is mainly attributed to channel fills of low sinuosity, braided fluvial systems. The coal-bearing finer-grained facies are interpreted as overbank and thaw-lake deposits, and represent the lower energy correlatives of the sandy channel fills. Sediment aggradation in this fluvio-lacustrine system took place under cold climatic conditions, with floating lake ice likely associated with lacustrine environments. Palaeo-current indicators suggest that the highly weathered, quartz-vein-rich metamorphic rock source of the Basal Unit was situated east-northeast of the study area. The accumulation of the Basal Unit took place within the back-bulge depozone of the Karoo foreland system. In addition to flexural subsidence, the amount of accommodation in this tectonic setting was also possibly modified by extensional tectonism in the later stages of the basin development. Based on sedimentological and biostratigraphic evidence, the coal-bearing fine-grained facies association displays strong similarities with the Vryheid Formation of the main Karoo Basin to the south. The lowermost non-fossiliferous breccias have been correlated before with the Dwyka Group in the main Karoo, and hence the Basal Unit may be regarded as the distal equivalent of the Dwyka and Ecca groups to the south.

Geologic map of the Vail West quadrangle, Eagle County, Colorado

USGS Publications Warehouse

Scott, Robert B.; Lidke, David J.; Grunwald, Daniel J.

2002-01-01

This new 1:24,000-scale geologic map of the Vail West 7.5' quadrangle, as part of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, provides new interpretations of the stratigraphy, structure, and geologic hazards in the area on the southwest flank of the Gore Range. Bedrock strata include Miocene tuffaceous sedimentary rocks, Mesozoic and upper Paleozoic sedimentary rocks, and undivided Early(?) Proterozoic metasedimentary and igneous rocks. Tuffaceous rocks are found in fault-tilted blocks. Only small outliers of the Dakota Sandstone, Morrison Formation, Entrada Sandstone, and Chinle Formation exist above the redbeds of the Permian-Pennsylvanian Maroon Formation and Pennsylvanian Minturn Formation, which were derived during erosion of the Ancestral Front Range east of the Gore fault zone. In the southwestern area of the map, the proximal Minturn facies change to distal Eagle Valley Formation and the Eagle Valley Evaporite basin facies. The Jacque Mountain Limestone Member, previously defined as the top of the Minturn Formation, cannot be traced to the facies change to the southwest. Abundant surficial deposits include Pinedale and Bull Lake Tills, periglacial deposits, earth-flow deposits, common diamicton deposits, common Quaternary landslide deposits, and an extensive, possibly late Pliocene landslide deposit. Landscaping has so extensively modified the land surface in the town of Vail that a modified land-surface unit was created to represent the surface unit. Laramide movement renewed activity along the Gore fault zone, producing a series of northwest-trending open anticlines and synclines in Paleozoic and Mesozoic strata, parallel to the trend of the fault zone. Tertiary down-to-the-northeast normal faults are evident and are parallel to similar faults in both the Gore Range and the Blue River valley to the northeast; presumably these are related to extensional deformation that occurred during formation of the northern end of the Rio Grande rift system in Colorado. In the southwestern part of the map area, a diapiric(?) exposure of the Eagle Valley Evaporite exists and chaotic faults and folds suggest extensive dissolution and collapse of overlying bedrock, indicating the presence of a geologic hazard. Quaternary landslides are common and indicate that landslide hazards are widespread in the area, particularly where old slide deposits are disturbed by construction. The late Pliocene(?) landslide that consists largely of a smectitic upper Morrison Formation matrix and boulders of Dakota Sandstone is readily reactivated. Debris flows are likely to invade low-standing areas within the towns of Vail and West Vail where tributaries of Gore Creek issue from the mountains on the north side of the valley.

Geochemistry of the Upper Triassic black mudstones in the Qiangtang Basin, Tibet: Implications for paleoenvironment, provenance, and tectonic setting

NASA Astrophysics Data System (ADS)

Wang, Zhongwei; Wang, Jian; Fu, Xiugen; Zhan, Wangzhong; Armstrong-Altrin, John S.; Yu, Fei; Feng, Xinglei; Song, Chunyan; Zeng, Shengqiang

2018-07-01

The Qiangtang Basin is the largest Mesozoic marine basin in the Tibetan Plateau. The Upper Triassic black mudstones are among the most significant hydrocarbon source rocks in this basin. Here, we present geochemical data for the Upper Triassic black mudstones to determine their paleoenvironment conditions, provenance, and tectonic setting. To achieve these, 30 black mudstones formed in various sedimentary environments were collected from the Zangxiahe, Zana, and Bagong formations. The results show that the total REE concentrations of mudstones from these formations range from 169 to 214 ppm, 204 to 220 ppm, and 141 to 194 ppm, respectively. All samples have chondrite-normalized REE patterns with enrichment of LREE, depletion of HREE and negative Eu and Ce anomalies. Specifically, mudstones from the Bagong Formation exhibit higher negative Eu anomalies and lower REE contents than those from the Zangxiahe and Zana formations. Mudstones from the Zangxiahe and Zana formations with low Sr/Ba and Sr/Cu ratios indicate the humid climate, whereas the high Sr/Ba and Sr/Cu ratios of rocks from the Bagong Formation suggest the arid climate. The low U/Th, (Cu + Mo)/Zn, V/Cr and Ni/Co ratios of rocks from the Zangxiahe, Zana, and Bagong formations are indicators of oxidized conditions. The bivariate diagrams (TiO2 vs. Al2O3, TiO2 vs. Zr, La/Th vs. Hf, and Co/Th vs. La/Sc) reveal that mudstones from the Zangxiahe and Zana formations were potentially derived from intermediate igneous rocks, whereas mudstones from the Bagong Formation were probably sourced from felsic igneous rocks. Their source rocks are mostly deposited in the collisional setting. REE of mudstones from the Zangxiahe, Zana, and Bagong formations were possibly originated from terrigenous detritus, with minor non-terrigenous contributions into the Zana samples. The REE contents of these mudstones are controlled mainly by terrigenous detrital minerals, rather than by the paleoclimate, paleoredox conditions, or organic matter. However, calcite minerals could dilute REE. Therefore, the REE contents of the Bagong Formation mudstones are significant lower than those of the Zangxiahe and Zana formations mudstones.

Clay mineralogy, strontium and neodymium isotope ratios in the sediments of two High Arctic catchments (Svalbard)

NASA Astrophysics Data System (ADS)

Hindshaw, Ruth S.; Tosca, Nicholas J.; Piotrowski, Alexander M.; Tipper, Edward T.

2018-03-01

The identification of sediment sources to the ocean is a prerequisite to using marine sediment cores to extract information on past climate and ocean circulation. Sr and Nd isotopes are classical tools with which to trace source provenance. Despite considerable interest in the Arctic Ocean, the circum-Arctic source regions are poorly characterised in terms of their Sr and Nd isotopic compositions. In this study we present Sr and Nd isotope data from the Paleogene Central Basin sediments of Svalbard, including the first published data of stream suspended sediments from Svalbard. The stream suspended sediments exhibit considerable isotopic variation (ɛNd = -20.6 to -13.4; 87Sr / 86Sr = 0.73421 to 0.74704) which can be related to the depositional history of the sedimentary formations from which they are derived. In combination with analysis of the clay mineralogy of catchment rocks and sediments, we suggest that the Central Basin sedimentary rocks were derived from two sources. One source is Proterozoic sediments derived from Greenlandic basement rocks which are rich in illite and have high 87Sr / 86Sr and low ɛNd values. The second source is Carboniferous to Jurassic sediments derived from Siberian basalts which are rich in smectite and have low 87Sr / 86Sr and high ɛNd values. Due to a change in depositional conditions throughout the Paleogene (from deep sea to continental) the relative proportions of these two sources vary in the Central Basin formations. The modern stream suspended sediment isotopic composition is then controlled by modern processes, in particular glaciation, which determines the present-day exposure of the formations and therefore the relative contribution of each formation to the stream suspended sediment load. This study demonstrates that the Nd isotopic composition of stream suspended sediments exhibits seasonal variation, which likely mirrors longer-term hydrological changes, with implications for source provenance studies based on fixed end-members through time.

Alga-like forms in onverwacht series, South Africa: Oldest recognized lifelike forms on earth

USGS Publications Warehouse

Engel, A.E.J.; Nagy, B.; Nagy, L.A.; Engel, C.G.; Kremp, G.O.W.; Drew, C.M.

1968-01-01

Spheroidal and cupshaped, carbonaceous alga-like bodies, as well as filamentous structures and amorphous carbonaceous matter occur in sedimentary rocks of the Onverwacht Series (Swaziland System) in South Africa. The Onverwacht sediments are older than 3.2 eons, and they are probably the oldest, little-altered sedimentary rocks on Earth. The basal Onverwacht sediments lie approximutely 10,000 meters stratigraphically below the Fig Tree sedimentary rocks, from which similar organic microstructures have been interpreted as alga-like micro-fossils. The Onverwacht spheroids and filaments are best preserved in black, carbon-rich cherts and siliceous argillites interlayered with thick sequences of lavas. These lifelike forms and the associated carbonaceous substances are probably biological in origin. If so, the origins of unicellular life on Earth are buried in older rocks now obliterated by igneous and metamorphic events.

Change of Conditions of the Formation of the Karelian Province of the Baltic Shield Continental Crust during Transition from Meso- to Neoarchean: Geochemical Study Results

NASA Astrophysics Data System (ADS)

Chekulaev, V. P.; Arestova, N. A.; Egorova, Yu. S.; Kucherovskii, G. A.

2018-05-01

The compositions of the tonalite-trondhjemite-granodiorite (TTG) assemblage and volcanic rocks of the Archaean greenstone belts from different domains of the Karelian province of the Baltic Shield are compared. Neoarchean medium felsic volcanic rocks and TTG of the Central Karelian domain drastically differ from analogous Mesoarchean rocks of the neighboring Vodlozero and West Karelian domains in higher Rb, Sr, P, La, and Ce contents and, correspondingly, values of Sr/Y, La/Yb, and La/Sm, and also in a different REE content distribution owing to different rock sources of these domains. This fact is confirmed by differences in the composition and the nature of the REE distribution in the basic and ultrabasic volcanic rocks making up the greenstone belts of these domains. It is established that the average compositions of Mesoarchean TTG rocks and volcanic rocks of the Karelian province differ markedly from those of plagiogranitoids and volcanic rocks of the recent geotectonic environments in high Mg (mg#) and Sr contents. Neoarchean volcanic rocks of Karelia differ from recent island-arc volcanic rocks, but are similar in composition to recent volcanic rocks of the continental arcs. On the basis of the cumulative evidence, the Karelian province of the Baltic Shield was subject to dramatic changes in the crust formation conditions at the beginning of the Neoarchean at the turn of about 2.75-2.78 Ga. These changes led to formation of volcano-sedimentary and plutonic rock complexes, different in composition from Mesoarchean rocks, and specific complexes of intrusive sanukitoids and granites. Changes and variations in the rock composition were related to the mixing of plume sources with continental crust and/or lithospheric mantle material, likely as a result of the combined effect of plumes and plate tectonics. This process resulted in formation of a younger large fragment of the Archean crust such as the Central Karelian domain which factually connected more ancient fragments of the crust and likely contributed to development of the Neoarchean Kenorland Supercontinent.

Lithostratigraphy, provenance and facies distribution of Archaean cratonic successions in western Kenya

NASA Astrophysics Data System (ADS)

Ngecu, Wilson M.; Gaciri, Steve J.

1995-10-01

The greenstone belt of the Tanzanian shield in Western Kenya is composed of two supracrustal successions, which form the Nyanzian and Kavirondian Groups. The Nyanzian Group at the base is composed of mafic tholeiitic basalts, calc-alkaline dacites and rhyolites. The group is unconformably overlain by the Kavirondian Group. During recent field mapping, the Kavirondian Group was divided into three formations. The Shivakala Formation consists of thickly bedded basal conglomerates, which are interbedded with thin sandstone beds. The Igukhu Formation conformably overlies the Shivakala Formation and is composed of thickly and locally thinly bedded greywacke. The uppermost Mudaa Formation is composed of blocky mudstones and thinly laminated shales. A high proportion of volcanic, granitic and chert pebbles in the conglomerates, along with abundant quartz, feldspars and mudstone fragments in the greywacke, indicates a mixed provenance of volcanic, granitic and recycled sedimentary rocks. Primary sedimentary structures and lithofacies associations indicate that the conglomerates were deposited in an alluvial fan/fan-delta setting. The greywackes represent proximal turbidites while the mudstone and shales were deposited mainly as distal turbidites. In the study area there is no evidence of transitional nearshore or shallow marine facies transitional to the continental and deep marine facies.

Rapid emergence of life shown by discovery of 3,700-million-year-old microbial structures

NASA Astrophysics Data System (ADS)

Nutman, Allen P.; Bennett, Vickie C.; Friend, Clark R. L.; van Kranendonk, Martin J.; Chivas, Allan R.

2016-09-01

Biological activity is a major factor in Earth’s chemical cycles, including facilitating CO2 sequestration and providing climate feedbacks. Thus a key question in Earth’s evolution is when did life arise and impact hydrosphere-atmosphere-lithosphere chemical cycles? Until now, evidence for the oldest life on Earth focused on debated stable isotopic signatures of 3,800-3,700 million year (Myr)-old metamorphosed sedimentary rocks and minerals from the Isua supracrustal belt (ISB), southwest Greenland. Here we report evidence for ancient life from a newly exposed outcrop of 3,700-Myr-old metacarbonate rocks in the ISB that contain 1-4-cm-high stromatolites—macroscopically layered structures produced by microbial communities. The ISB stromatolites grew in a shallow marine environment, as indicated by seawater-like rare-earth element plus yttrium trace element signatures of the metacarbonates, and by interlayered detrital sedimentary rocks with cross-lamination and storm-wave generated breccias. The ISB stromatolites predate by 220 Myr the previous most convincing and generally accepted multidisciplinary evidence for oldest life remains in the 3,480-Myr-old Dresser Formation of the Pilbara Craton, Australia. The presence of the ISB stromatolites demonstrates the establishment of shallow marine carbonate production with biotic CO2 sequestration by 3,700 million years ago (Ma), near the start of Earth’s sedimentary record. A sophistication of life by 3,700 Ma is in accord with genetic molecular clock studies placing life’s origin in the Hadean eon (>4,000 Ma).

An Aquatic Journey toward Aeolis Mons (Mount Sharp): Sedimentary Rock Evidence observed by Mars Science Laboratory

NASA Astrophysics Data System (ADS)

Gupta, Sanjeev; Edgar, Lauren; Williams, Rebecca; Rubin, David; Yingst, Aileen; Lewis, Kevin; Kocurek, Gary; Anderson, Ryan; Dromart, Gilles; Edgett, Ken; Hardgrove, Craig; Kah, Linda; Mangold, Nicolas; Milliken, Ralph; Minitti, Michelle; Palucis, Marisa; Rice, Melissa; Stack, Katie; Sumner, Dawn; Williford, Ken

2014-05-01

Since leaving Yellowknife Bay (summer 2013), Mars Science Laboratory Curiosity has investigated a number of key outcrops as it traverses along the Rapid Transit Route toward the entry point to begin its investigations of the extensive rock outcrops at the base of Mount Sharp. Rover observations are characterizing the variability of lithologies and sedimentary facies along the traverse and establishing stratigraphic relationships with the aim of reconstructing depositional processes and palaeoenvironments. Here, we report on sedimentological and stratigraphic observations based on images from the Mastcam and MAHLI instruments at Shaler and the Darwin waypoint. The informally named Shaler outcrop, which forms part of the Glenelg member of the Yellowknife Bay formation [1] is remarkable for the preservation of a rich suite of sedimentary structures and architecture, and was investigated on sols 120-121 and 309-324. The outcrop forms a pebbly sandstone body that is ~0.7 m thick and extends for up to 20 m. Shaler is largely characterized by pebbly sandstone facies showing well-developed decimeter-scale trough cross-stratification. Bedding geometries indicate sub-critical angles of climb, resulting in preservation of only the lee slope deposits. The grain size, and the presence and scale of cross-stratification imply sediment transport and deposition by unidirectional currents in a fluvial sedimentary environment. Curiosity investigated the informally named Darwin waypoint between sols 390 and 401, making detailed Mastcam and MAHLI observations at two separate locations. The Darwin outcrop comprises light-toned sandstone beds separated by darker pebbly sandstones. MAHLI observations permit differentiation of distinct sedimentary facies. The Altar Mountain facies is a poorly sorted pebbly sandstone that is rich in fine pebbles. Pebbles are sub-angular to sub-rounded in shape and show no preferred orientation or fabric. Pebbles and sand grains show clast-to-clast contacts. The clast-supported nature of the facies, the presence of coarse sand grains to fine pebbles, and the occurrence of some rounding of clasts indicates that these are sedimentary clasts that have been transported by aqueous flows. However, the absence of a well-sorted fabric, size grading of clast, and major rounding of grains suggests that these pebbly sandstones were rapidly deposited rather than built up from sustained fluvial reworking, implying that the deposits may be the result of more ephemeral river flows rather than sustained flow discharges. The Bardin Bluffs facies overlies the Altar Mountain facies and shows a more sand-dominated fabric with a smaller proportion of floating fine pebbles. This facies is also clast-supported but contains fewer pebbles and shows an overall fining-up trend. This facies is also interpreted to represent fluvial deposition albeit with a different grain size distribution than the Altar Mountains facies. We will compare and contrast the varying sedimentary fabrics and facies to develop models for the variety of aqueous fluvial transport processes that have led to the deposition of sedimentary rocks en route to Mount Sharp. The origin of these sedimentary rocks with relation to fluvial fan processes in Gale Crater will be discussed. References: [1] Grotzinger, J.P. et al Science 2013, doi: 10.1126/science.1242777.

A New Unusual Ice-induced Sedimentary Structure: the Silt Mushroom

PubMed Central

Jianhua, Zhong; Liangtian, Ni; Ningliang, Sun; Chuang, Liu; Bing, Hao; Mengchun, Cao; xin, Chen; Ke, Luo; Shengxin, Liu; Leitong, Huang; Guanqun, Yang; Shaojie, Wang; Feifei, Su; Xuejing, He; Yanqiu, Xue

2016-01-01

Upon channel bars or point bars within the lows of the Yellow River, a new sedimentary structure, named ‘silt mushroom’, has been observed. The process of their formation is interpreted to be via the ice process. The name, the silt mushroom comes from their figurative form. This is because they look somewhat similar to mushroom’s in size and shape; being in the range of 1 to 10 cm in diameter, with the medium 3–5 cm, and on average 10 cm in height, occuring generally in groups, and occasionally in isolation in relatively soft silt. They develop in the transition from winter to spring, and are convincingly related to ice processes. Ice-induced silt mushrooms are best examined in association with the many other newly discovered ice-induced sedimentary structures (over 20 kinds). Clearly, up to now, ice processes have been significantly underestimated. With the substantial discovery of the ice-induced silt mushroom, it opens up new questions. This is because its structure mirrors the same sedimentary structures found in rocks, questioning their genesis, and sedimentary environment analysis. This achievement is significant not only in sedimentology, but also in palaeogeography, palaeoclimate, geological engineering, hydraulics and fluviology. PMID:27833155

Formation Conditions and Sedimentary Characteristics of a Triassic Shallow Water Braided Delta in the Yanchang Formation, Southwest Ordos Basin, China.

PubMed

Liu, Ziliang; Shen, Fang; Zhu, Xiaomin; Li, Fengjie; Tan, Mengqi

2015-01-01

A large, shallow braided river delta sedimentary system developed in the Yanchang Formation during the Triassic in the southwest of the Ordos basin. In this braided delta system, abundant oil and gas resources have been observed, and the area is a hotspot for oil and gas resource exploration. Through extensive field work on outcrops and cores and analyses of geophysical data, it was determined that developments in the Late Triassic produced favorable geological conditions for the development of shallow water braided river deltas. Such conditions included a large basin, flat terrain, and wide and shallow water areas; wet and dry cyclical climate changes; ancient water turbulence; dramatic depth cycle changes; ancient uplift development; strong weathering of parent rock; and abundant supply. The shallow water braided river delta showed grain sediment granularity, plastic debris, and sediment with mature composition and structure that reflected the strong hydrodynamic environment of large tabular cross-bedding, wedge cross-bedding, and multiple positive rhythms superimposed to form a thick sand body layer. The branch river bifurcation developed underwater, and the thickness of the sand body increased further, indicating that the slope was slow and located in shallow water. The seismic responses of the braided river delta reflected strong shallow water performance, indicated by a progradation seismic reflection phase axis that was relatively flat; in addition, the seismic reflection amplitude was strong and continuous with a low angle and extended over considerable distances (up to 50 km). The sedimentary center was close to the provenance, the width of the river was large, and a shallow sedimentary structure and a sedimentary rhythm were developed. The development of the delta was primarily controlled by tectonic activity and changes in the lake level; as a result, the river delta sedimentary system eventually presented a "small plain, big front" character.

Formation Conditions and Sedimentary Characteristics of a Triassic Shallow Water Braided Delta in the Yanchang Formation, Southwest Ordos Basin, China

PubMed Central

Liu, Ziliang; Shen, Fang; Zhu, Xiaomin; Li, Fengjie; Tan, Mengqi

2015-01-01

A large, shallow braided river delta sedimentary system developed in the Yanchang Formation during the Triassic in the southwest of the Ordos basin. In this braided delta system, abundant oil and gas resources have been observed, and the area is a hotspot for oil and gas resource exploration. Through extensive field work on outcrops and cores and analyses of geophysical data, it was determined that developments in the Late Triassic produced favorable geological conditions for the development of shallow water braided river deltas. Such conditions included a large basin, flat terrain, and wide and shallow water areas; wet and dry cyclical climate changes; ancient water turbulence; dramatic depth cycle changes; ancient uplift development; strong weathering of parent rock; and abundant supply. The shallow water braided river delta showed grain sediment granularity, plastic debris, and sediment with mature composition and structure that reflected the strong hydrodynamic environment of large tabular cross-bedding, wedge cross-bedding, and multiple positive rhythms superimposed to form a thick sand body layer. The branch river bifurcation developed underwater, and the thickness of the sand body increased further, indicating that the slope was slow and located in shallow water. The seismic responses of the braided river delta reflected strong shallow water performance, indicated by a progradation seismic reflection phase axis that was relatively flat; in addition, the seismic reflection amplitude was strong and continuous with a low angle and extended over considerable distances (up to 50 km). The sedimentary center was close to the provenance, the width of the river was large, and a shallow sedimentary structure and a sedimentary rhythm were developed. The development of the delta was primarily controlled by tectonic activity and changes in the lake level; as a result, the river delta sedimentary system eventually presented a “small plain, big front” character. PMID:26075611

Closure Time of the Junggar-Balkhash Ocean: Constraints From Late Paleozoic Volcano-Sedimentary Sequences in the Barleik Mountains, West Junggar, NW China

NASA Astrophysics Data System (ADS)

Liu, Bo; Han, Bao-Fu; Chen, Jia-Fu; Ren, Rong; Zheng, Bo; Wang, Zeng-Zhen; Feng, Li-Xia

2017-12-01

The Junggar-Balkhash Ocean was a major branch of the southern Paleo-Asian Ocean. The timing of its closure is important for understanding the history of the Central Asian Orogenic Belt. New sedimentological and geochronological data from the Late Paleozoic volcano-sedimentary sequences in the Barleik Mountains of West Junggar, NW China, help to constrain the closure time of the Junggar-Balkhash Ocean. Tielieketi Formation (Fm) is dominated by littoral sediments, but its upper glauconite-bearing sandstone is interpreted to deposit rapidly in a shallow-water shelf setting. By contrast, Heishantou Fm consists chiefly of volcanic rocks, conformably overlying or in fault contact with Tielieketi Fm. Molaoba Fm is composed of parallel-stratified fine sandstone and sandy conglomerate with graded bedding, typical of nonmarine, fluvial deposition. This formation unconformably overlies the Tielieketi and Heishantou formations and is conformably covered by Kalagang Fm characterized by a continental bimodal volcanic association. The youngest U-Pb ages of detrital zircons from sandstones and zircon U-Pb ages from volcanic rocks suggest that the Tielieketi, Heishantou, Molaoba, and Kalagang formations were deposited during the Famennian-Tournaisian, Tournaisian-early Bashkirian, Gzhelian, and Asselian-Sakmarian, respectively. The absence of upper Bashkirian to Kasimovian was likely caused by tectonic uplifting of the West Junggar terrane. This is compatible with the occurrence of coeval stitching plutons in the West Junggar and adjacent areas. The Junggar-Balkhash Ocean should be finally closed before the Gzhelian, slightly later or concurrent with that of other ocean domains of the southern Paleo-Asian Ocean.

Using Aluminum Foil to Record Structures in Sedimentary Rock.

ERIC Educational Resources Information Center

Metz, Robert

1982-01-01

Aluminum foil can be used to make impressions of structures preserved in sedimentary rock. The impressions can be projected onto a screen, photographed, or a Plaster of Paris model can be made from them. Impressions of ripple marks, mudcracks, and raindrop impressions are provided in photographs illustrating the technique. (Author/JN)

Highly Shocked Low Density Sedimentary Rocks from the Haughton Impact Structure, Devon Island, Nunavut, Canada

NASA Technical Reports Server (NTRS)

Osinski, G. R.; Spray, J. G.

2001-01-01

We present the preliminary results of a detailed investigation of the shock effects in highly shocked, low density sedimentary rocks from the Haughton impact structure. We suggest that some textural features can be explained by carbonate-silicate immiscibility. Additional information is contained in the original extended abstract.

Sedimentary Rocks and Methane - Southwest Arabia Terra

NASA Technical Reports Server (NTRS)

Allen, Carlton C.; Oehler, Dorothy Z.; Venechuk, Elizabeth M.

2006-01-01

We propose to land the Mars Science Laboratory in southwest Arabia Terra to study two key aspects of martian history the extensive record of sedimentary rocks and the continuing release of methane. The results of this exploration will directly address the MSL Scientific Objectives regarding biological potential, geology and geochemistry, and past habitability.

Graphite as a Biomarker in Rocks of the 3.8 Ga Isua Supracrustal Belt

NASA Astrophysics Data System (ADS)

Lepland, A.; van Zuilen, M.; Layne, G. D.; Arrhenius, G.

2002-12-01

Recent petrographic and isotopic studies of graphite and apatite in supracrustal rocks from the 3.8 Ga Isua belt (ISB) in southern West Greenland [1, 2] have shown inconsistencies in interpreting traces of life in the earliest terrestrial sediment record. Isotopically light graphitic carbon, suggestive of a bioorganic origin, has been previously reported from the carbonate-rich Isua rocks [3, 4] that at the time were recognized as sedimentary deposits. However, these carbonate-rich rocks, that provided the basis for original biologic interpretations, have been shown to have a metasomatic origin [5] not sedimentary as previously believed. This protolith reinterpretation has highlighted the need for assessment of graphite genesis and related isotopic systematics when using graphite as an ancient biomarker. We have, for this purpose, studied graphite in a suite of samples from the ISB including metacarbonates, turbidites, cherts and banded iron formations (BIFs). Graphite is relatively abundant (0.1-2 wt. %) in metacarbonate samples, while the abundances of reduced carbon in metasedimentary BIFs and metacherts are below 100 ppm. Petrographic analyses show that graphite in metacarbonates typically associates with Fe-bearing carbonate and magnetite. This mineral association indicates graphite formation in Isua metacarbonates by thermal-metamorphic reduction of carbonate ion, in which the carbonate ion is reduced to form graphite and ferrous iron is oxidized to form magnetite. Carbon isotopic compositions of graphite (δ13C ca. -2 per mil) and associated Fe-carbonate (δ13C ca. -6 per mil) indicate isotopic equilibrium between these two phases at ca. 500 C, consistent with the metamorphic history of the ISB. Stepped-combustion experiments undertaken on Isua BIFs and metacherts reveal that these sediments contain virtually no graphite, and the small amount of reduced carbon found there represents recent organic contamination. Our stepped-combustion-mass-spectrometry data demonstrate that previous isotopic results on graphite deficient Isua rocks obtained by single step combustion are unreliable. The proposed biologic significance of graphite occurring as inclusions in apatite [4] in Isua rocks is not supported by our findings because such graphite-apatite association can only be found in biologically irrelevant metacarbonate rocks. The isotopic systematics of the epigenetic processes responsible for formation of isotopically light graphite enclosed in apatite crystals [4] will be discussed, integrating new ion microprobe isotope data on graphite in apatite and other mineral phases occurring in Isua metacarbonates. References: [1] van Zuilen, M., Lepland, A. and Arrhenius, G., 2002. Reassessing the evidence for the earliest traces of life. Nature 418: 627-630. [2] Lepland, A., Arrhenius, G. and Cornell, D. in press. Apatite in early Archean Isua supracrustal rocks, southern West Greenland: its origin, association with graphite and potential as a biomarker. Precam. Res. [3] Schidlowski, M., 1988. A 3,800-million-year isotopic record of life from carbon in sedimentary rocks. Nature 333: 313-318. [4] Mojzsis, S.J., Arrhenius, G., McKeegan, K.D., Harrison, T.M., Nutman, A.P. and Friend, C.R.L., 1996. Evidence for life on Earth before 3800 million years ago. Nature 384: 55-59. [5] Rosing, M.T., Rose, N.M., Bridgwater, D. and Thomsen, H.S., 1996. Earliest part of Earth's stratigraphic record: a reappraisal of the >3.7 Ga Isua (Greenland) supracrustal sequence. Geol. 24: 43-46.

Timing of porosity destruction related to pressure-solution in limestones

NASA Astrophysics Data System (ADS)

Beaudoin, Nicolas; Koehn, Daniel; Aharonov, Einat; Boyce, Adrian; Billi, Andrea; Hamilton, Andrea

2017-04-01

Among effects that affect sedimentary rocks during diagenesis, pressure-solution has a very strong impact on the physical properties of rocks such as porosity and permeability. Intergranular pressure-solution results in rough or wavy surfaces called stylolites, which are very common in sedimentary basins, especially in limestone. According to the opening of the system, dissolved material can precipitate locally, leading to the destruction of the porosity around the stylolite. That can namely occur during the development of sedimentary stylolites, when no fracture of fault can allow dissolved material to flow away before precipitating again. This contribution aims at unravelling the depth at which the material dissolved during compaction precipitated in the open porosity, adding new data to discuss when pressure-solution starts to be an efficient mechanism of deformation in limestone during strata burial in sedimentary basins. We report the results of the study of cements that fill the fractures developed at the tips of stylolites in a sample of dolostone from the Jurassic Calcare Massiccio formation, coming from the Umbria-Marche area (Italy). The fractures developed from stylolite-induced stress, and the filling cements' oxygen and carbon isotopic values range between 10.6‰ to -6.1‰ PDB and -8.2‰ to -0.6‰ PDB, respectively. Considering a closed system, we use fractionation equations to convert δ18O values into temperature, which shows that the material put in solution during pressure-solution precipitated at a temperature ranging from 18°C to 39°C. Temperature range and geothermal gradient estimates suggest that the mechanism of pressure-solution actually was primarily active at depth as low as 1 km. In the studied sample, up to 18% of the original volume has been dissolved on stylolites, and that volume loss would have occurred in the first 2 km of the burial history. This natural example feeds the growing body of evidence that stylolites can start developing at a very low depth level. Our results suggest that the porosity in sedimentary rocks can be destroyed very early during burial, both by dissolution and by precipitation, which make the pressure-solution mechanism's impact on fluid flow in basin likely to be underestimated.

The investigation of terrestrial analogs for the paleoclimate of Mars

NASA Astrophysics Data System (ADS)

Thorpe, M.; Hurowitz, J.; Dehouck, E.

2016-12-01

The paleoclimate of Mars is recorded in sedimentary rocks and deposits, with geochemical and mineralogical lines of evidence illustrating an active hydrologic cycle and aqueous weathering environment. The nature of this paleoclimate remains a debatable subject, with several competing hypothesis existing from warm and wet to cold and icy. However, sedimentary processes in basaltic terrains are understudied, leading to an inadequate reference frame for the sedimentary record of Mars. Therefore, investigating the effects of climate on basaltic terrestrial analogs will help in establishing a context for understanding the ancient conditions of Mars. The Columbia River Basalts in Idaho, USA will serve as conditions in a warm and wet climate, while the weathering of Icelandic Basalts in southwestern Iceland will provide a cold and wet climate scenario. In the warm and wet conditions of Idaho, Miocene basaltic source rock is broken down by physical and chemical weathering, transported by streams and deposited locally as small deltas. The sediment that accumulates preserves the basaltic provenance mineralogy in grain sizes as small as silt. The major elemental geochemistry displays chemical weathering trends that are consistent with decreasing grain size, and interpreted as mafic mineral dissolution (i.e., olivine and pyroxenes). Clay mineral phases are separated into the finest grain size fraction during the sedimentation process and are identified as smectite clays. A similar story of preserving basaltic mineralogy is illustrated by Icelandic deposits, except mechanical breakdown of the sediment appears to have a larger impact. Primary mafic minerals are identified in even the clay size fraction of the Icelandic fluvial delta deposits. Additionally, there are limited abundances of clay mineral phases, with more obvious contributions of poorly crystalline phases in the less than 2 micron fraction. The preservation of basaltic provenance in the mineralogy of sediments generated in two contrasting climates is important to Mars were sedimentary rocks display a primary igneous mineralogy. Weathering trends and the formation of secondary clay and(or) poorly crystalline phases may be the defining tracers for climatic influence on sedimentary processes in basaltic environments.

Sequence stratigraphy and sedimentary study on Mishrif formation of Fauqi Oilfield of Missan in south east Iraq

NASA Astrophysics Data System (ADS)

Sang, Hua; Lin, Changsong; Jiang, Yiming

2017-05-01

The reservoir of Mishrif formation has a large scale distribution of marine facies carbonate sediments in great thickness in central and south east Iraq. Rudist reef and shoal facies limestones of the Mishrif Formation (Late Cenomanian - Middle Turonian) form a great potential reservoir rocks at oilfields and structures of Iraq. Facies modelling was applied to predict the relationship between facies distribution and reservoir characteristics to construct a predictive geologic model which will assist future exploration and development in south east Iraq. Microfacies analysis and electrofacies identification and correlations indicate that the limestone of the Mishrif Formation were mainly deposited in open platform setting. Sequence stratigraphic analyses of the Mishrif Formation indicate 3 third order depositional sequences.

Geology and geochemistry of three sedimentary-rock-hosted disseminated gold deposits in Guizhou Province, People's Republic of China

USGS Publications Warehouse

Ashley, R.P.; Cunningham, C.G.; Bostick, N.H.; Dean, W.E.; Chou, I.-Ming

1991-01-01

Five sedimentary-rock-hosted disseminated gold deposits have been discovered since 1980 in southwestern Guizhou Province (PRC). Submicron-sized gold is disseminated in silty carbonate and carbonaceous shale host rocks of Permian and Triassic age. Arsenic, antimony, mercury, and thallium accompany the gold. Associated hydrothermal alteration resulted in decarbonatization of limestone, silicification, and argillization, and depletion of base metals, barium, and many other elements. Organic material occurs in most host rocks and ores. It was apparently devolatilized during a regional heating event that preceded hydrothermal activity, and thus was not mobilized during mineralization, and did not affect gold deposition. The geologic setting of the Guizhou deposits includes many features that are similar to those of sedimentary-rock-hosted deposits of the Great Basin, western United States. The heavy-element suite that accompanies gold is the same, but base metals are even scarcer in the Guizhou deposits than they are in U.S. deposits. The Guizhou deposits discovered to date are smaller than most U.S. deposits and have no known spatially associated igneous rocks. ?? 1991.

Summary of the geology and resources of uranium in the San Juan Basin and adjacent region, New Mexico, Arizona, Utah, and Colorado

USGS Publications Warehouse

Ridgley, Jennie L.; Green, M.W.; Pierson, C.T.; Finch, W.I.; Lupe, R.D.

1978-01-01

The San Juan Basin and adjacent region lie predominantly in the southeastern part of the uranium-rich Colorado Plateau of New Mexico, Arizona, Utah, and Colorado. Underlying the province are rocks of the Precambrian basement complex composed mainly of igneous and metamorphic rocks; a thickness of about 3,600 meters of generally horizontal Paleozoic, Mesozoic, and Cenozoic sedimentary rocks; and a variety of Upper Cretaceous and Cenozoic igneous rocks. Sedimentary rocks of the sequence are commonly eroded and well exposed near the present basin margins where Tertiary tectonic activity has uplifted, folded, and faulted the sequence into its present geologic configuration of basins, platforms, monoclines, and other related structural features. Sedimentary rocks of Jurassic age in the southern part of the San Juan Basin contain the largest uranium deposits in the United States, and offer the promise of additional uranium deposits. Elsewhere in the basin and the adjacent Colorado Plateau, reserves and resources of uranium are known primarily in Triassic, Jurassic, and Cretaceous strata. Only scattered occurrences of uranium are known in Paleozoic

Case study of a sabkha sedimentary environment: Mallahat al Bariquah, Libya

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krason, J.

1987-05-01

The importance of the sabkha sedimentary environment for formation and/or accumulation of hydrocarbons, salts, and various metalliferous mineral deposits has been recognized by many geologists. A sabkha in which sedimentation and the formation of salt deposits and hydrocarbons is in progress is located along the Mediterranean Sea coast, in northwestern Libya and northeastern Tunisia. The sabkha Mallahat al Bariquah was drilled in a regular grid at 1-km spacing; 63 holes have been completed. The sabkha and its vicinity were geologically mapped (1:20,000). Several hundred core and loose rock samples were thoroughly examined with regard to the lithology, mineralogy, paleontology, andmore » chemical composition. The chemistry of brine from each drill hole and solar pan was determined. Three 24-hour pumping tests were performed, and the hydrogeological conditions of the sabkha were analyzed in detail. Economically valuable bedded salt reserves of 170,800,000 MT of NaCl were discovered and proven. Additionally, over 30 million MT of potassium, magnesium, and sodium salts including bromides are recoverable from the brine. Although marine-coastal sabkhas are common, the extensive scope of this study is unique. Mallahat al Bariquah sabkha is not unique with regard to its geographic, climatic, or sedimentary environments. Therefore, Mallahat al Bariquah can be considered as a model applicable in exploration for and study of similar sedimentary environments in other geographic regions and older geologic epochs.« less

Flexure and faulting of sedimentary host rocks during growth of igneous domes, Henry Mountains, Utah

USGS Publications Warehouse

Jackson, M.D.; Pollard, D.D.

1990-01-01

A sequence of sedimentary rocks about 4 km thick was bent, stretched and uplifted during the growth of three igneous domes in the southern Henry Mountains. Mount Holmes, Mount Ellsworth and Mount Hillers are all about 12 km in diameter, but the amplitudes of their domes are about 1.2, 1.85 and 3.0 km, respectively. These mountains record successive stages in the inflation of near-surface diorite intrusions that are probably laccolithic in origin. The host rocks deformed along networks of outcrop-scale faults, or deformation bands, marked by crushed grains, consolidation of the porous sandstone and small displacements of sedimentary beds. Zones of deformation bands oriented parallel to the beds and formation contacts subdivided the overburden into thin mechanical layers that slipped over one another during doming. Measurements of outcrop-scale fault populations at the three mountains reveal a network of faults that strikes at high angles to sedimentary beds which themselves strike tangentially about the domes. These faults have normal and reverse components of slip that accommodated bending and stretching strains within the strata. An early stage of this deformation is displayed at Mount Holmes, where states of stress computed from three fault samples correlate with the theoretical distribution of stresses resulting from bending of thin, circular, elastic plates. Field observations and analysis of frictional driving stresses acting on horizontal planes above an opening-mode dislocation, as well as the paleostress analysis of faulting, indicate that bedding-plane slip and layer flexure were important components of the early deformation. As the amplitude of doming increased, radial and circumferential stretching of the strata and rotation of the older faults in the steepening limbs of the domes increased the complexity of the fault patterns. Steeply-dipping, map-scale faults with dip-slip displacements indicate a late-stage jostling of major blocks over the central magma chamber. Radial dikes pierced the dome and accommodated some of the circumferential stretching. ?? 1990.

Enigmatic organosiliceous rocks in the 2000 Ma petrified oil field in Russian Fennoscandia

NASA Astrophysics Data System (ADS)

Deines, Yu.; Melezhik, V.; Lepland, A.; Filippov, M.; Romashkin, A.; Rychanchik, D.

2009-04-01

The c. 2000 Ma, 900 m-thick, Zaonezhskaja Formation in the Onega basin, Russian Fennoscandia, contains one of the greatest accumulations of organic matter (OM) in the Early Precambrian. It also represents a unique preservation of a supergiant petrified oil field. Zaonezhskaja Formation rocks are greenschist-facies volcaniclastic greywackes (distal turbidites), dolostone and limestones, mafic tuffs and lavas intruded by numerous mafic sills. Several sedimentary beds are enriched in OM with the overall content of total organic carbon (TOC) ranging from 0.1 to 16 wt.% whereas d13C varies between -44 and -17 per mil(V-PDB). The formation contains plentiful evidence of generation and migration of oil (now petrified) as well as oil traps. Results of geophysical surveys combined with drillcore data, including results recently obtained within the framework of the Fennoscandian Arctic Russia - Drilling Early Earth Project (FAR-DEEP), revealed numerous bodies of organosiliceous rocks (OSR) containing mainly silica (c. 57 wt.% SiO2), organic carbon (up to 40 wt.%), Al2O3 (c. 5 wt.%), S (c. 2 wt.%), and minor K, Mg, Fe, Ca and Ti. d13C of the OSR ranges between -40 and -20 per mil. The OSR form crudely stratified beds, cupola-like bodies or veins. The cupola-like bodies show cross-cutting (intrusive) contacts with the host turbiditic greywackes, reach thicknesses of 120 m with a lateral extent of several hundreds of metres. Veins are a few tens of centimetres thick. The OSR show close spatial association with gabbro sills. Although different fabrics have been recognised in the OSR, syngenetic macro- and microbreccias per se are the most common rock types. Fragments of different sedimentary rocks, as well as those with alternating C-rich and C-poor concentric lamina are present. The latter suggests precipitation from hydrothermal fluids. The nature of the OSR remains enigmatic. Several models have been advanced for explanation of origin of the OSR. However, neither of them could explain the source, and joint transport of two major components, namely silica and OM. We propose a model involving a hydrothermal system initiated by heat produced during the emplacement of numerous mafic intrusive bodies. Such heat may have created the necessary temperature gradient for earlier oil generation, thermal oil to gas cracking, and initiation of shallow-seated, sub-surface, hydrothermal circulation. The proposed result would have been the mingling of silica leached from mafic rocks with hydrocarbon, and gas (primarily CO2, CH4) extracted from the host sedimentary rocks. Such a gas-rich C-Si-H2O substance would have migrated into permeable beds. A high sedimentation rate, as expected in many turbiditic depositional environments, would have produced a high lithostatic pressure on to unlithified beds during the course of the basin subsidence. This would have forced gas-rich C-Si-H2O fluids that moved either laterally along permeable beds or vertically along zones of weakness. In the first case, sediments 'impregnated' with gas-rich C-Si-H2O fluids would have formed stratigraphic beds of OSR, whereas in the second case the result would been crosscutting veins. Beds may retain some primary layering, whereas veins do not. If veins reached the seafloor, the sediment - C-Si-H2O mush would have extruded in the form of a mud volcano / hydrothermal mound, and thus formed a cupola-like morphology. During the course of compression, the sediment - C-Si-H2O mush might have experienced several stages of partial lithification, as well as fluidisation processes leading to the formation of several generations of micro- and macro-brecciated rocks. The large d13C range of reduced carbon in the OSR suggests a complex maturation process of the biogenic OM. Further detailed microstructural, geochemical, isotopic and biomarker studies are planned for distinguishing between biological and abiological processes involved in the formation of the enigmatic OSR.

Origin and significance of the 2011 El Hierro xeno-pumice

NASA Astrophysics Data System (ADS)

Zaczek-Pedroza, Kirsten; Troll, Valentin R.; Deegan, Frances M.; Meade, Fiona C.; Burchardt, Steffi; Carracedo, Juan C.; Klügel, Andreas; Harris, Chris; Wiesmaier, Sebastian; Berg, Sylvia E.; Barker, Abigail K.

2014-05-01

During the first week of the 2011/2012 submarine eruption off El Hierro (Canary Islands), peculiar light-coloured pumiceous rocks (xeno-pumice) were found floating on the sea. The appearance of these rocks led to a potentially inappropriate response from the authorities, because the rocks were viewed as likely indicators of high-silica magma and possible explosive eruptive behaviour. However, the eruption remained a relatively minor and dominantly effusive event and the origin and significance of these peculiar xeno-pumice rocks for volcanic monitoring remains unresolved. Three contrasting models have been put forward, describing them as: a) recycled hydrothermally altered felsic magmatic rocks (Meletlidis et al., 2012, Geophys. Res. Lett., 39:L17302), b) sediment-contaminated high-silica magma (Sigmarsson et al., 2013, Contrib. Mineral. Petrol., 165:601-622) or c) frothy xenoliths from pre-island sedimentary strata that were melted while immersed in magma (Troll et al., 2012, Solid Earth, 3:97-110). Here, we combine the three available datasets to assess the origin of El Hierro xeno-pumice in the light of texture, mineralogy, major and trace element composition, and oxygen isotope characteristics in order to discuss their significance. We note that: 1) Sedimentary relicts occur frequently in xeno-pumice samples with occasionally observed relict bedding. 2) Vesicle sizes are extremely variable, which documents multiple degassing events. The vesicles are biggest especially close to sedimentary relicts, likely the result of a complex mix of minerals and porewaters originally present. 3) The mineral assemblage of xeno-pumice includes quartz, smectite, illite, wollastonite, jasper and mica (XRD) and is akin to marine sedimentary rocks in the region (Hoernle, 1998, J. Petrol.,39:859-880; Robertson & Stillman, 1979, J. Geol. Soc., 136:47 -60; Aparicio et al., 2006, Geol. Mag. 143:181 -193). 4) CIPW norms calculated from xeno-pumice major element compositions show the samples to be Si-oversaturated, partly corundum-normative, but with not magmatic mineral components in the norm. 5) Trace element concentrations of xeno-pumice are unlike any magmatic rocks from El Hierro and La Palma, but similar to known sedimentary rocks from the region. 6) A distinct Eu anomaly, typical for continentally derived sediment, is present in xeno-pumice but absent in El Hierro and La Palma magmatic rocks. Lastly, 7) Oxygen isotope values range from 9.1 to 11.6 o (n=6), which are elevated with respect to magmatic rocks from the Canaries (5.2 to ~ 7 o), but are characteristic for sediment derived from a mixture of continental (S- and I-type) granite sources. The combined datasets allow for a more thorough discussion on the origin of El Hierro xeno-pumice and we conclude that xeno-pumice is compositionally akin to sedimentary rocks from the region, but strikingly dissimilar to magmatic rocks from El Hierro and La Palma. We suggest a dominantly sedimentary origin for xeno-pumice. Xeno-pumice is therefore not an indicator for explosive felsic magma within volcanic plumbing systems, but a reflection of magma-crust interaction during ascent and emplacement. The occurrence of similar frothy sedimentary xenoliths in recent and historical eruptions on Lanzarote, Gran Canaria, Tenerife and La Palma make a case for xeno-pumice being a common phenomenon in the region.

Geologic framework, age, and lithologic characteristics of the North Park Formation in North Park, north-central Colorado

USGS Publications Warehouse

Shroba, Ralph R.

2016-10-18

Deposits of the North Park Formation of late Oligocene and Miocene age are locally exposed at small, widely spaced outcrops along the margins of the roughly northwest-trending North Park syncline in the southern part of North Park, a large intermontane topographic basin in Jackson County in north-central Colorado. These outcrops suggest that rocks and sediments of the North Park Formation consist chiefly of poorly consolidated sand, weakly cemented sandstone, and pebbly sandstone; subordinate amounts of pebble conglomerate; minor amounts of cobbly pebble gravel, siltstone, and sandy limestone; and rare beds of cobble conglomerate and altered tuff. These deposits partly filled North Park as well as a few small nearby valleys and half grabens. In North Park, deposits of the North Park Formation probably once formed a broad and relatively thick sedimentary apron composed chiefly of alluvial slope deposits (mostly sheetwash and stream-channel alluvium) that extended, over a distance of at least 150 kilometers (km), northwestward from the Never Summer Mountains and northward from the Rabbit Ears Range across North Park and extended farther northwestward into the valley of the North Platte River slightly north of the Colorado-Wyoming border. The maximum preserved thickness of the formation in North Park is about 550 meters near the southeastern end of the North Park syncline.The deposition of the North Park Formation was coeval in part with local volcanism, extensional faulting, development of half grabens, and deposition of the Browns Park Formation and Troublesome Formation and was accompanied by post-Laramide regional epeirogenic uplift. Regional deposition of extensive eolian sand sheets and loess deposits, coeval with the deposition of the North Park Formation, suggests that semiarid climatic conditions prevailed during the deposition of the North Park Formation during the late Oligocene and Miocene.The North Park Formation locally contains a 28.1-mega-annum (Ma, million years ago) ash-flow tuff near its base at Owl Ridge and is interbedded with 29-Ma rhyodacite lava flows and volcanic breccia at Owl Mountain. The formation locally contains vertebrate fossils at least as young as Barstovian age (about 15.9–12.6 Ma) and overlies rocks as young as the White River Formation, which contains vertebrate fossils of Chadronian age (about 37–33.8 Ma) in North Park and a bed of 36.0-Ma volcanic ash in the upper part of the Laramie River valley about 30 km northeast of Walden, Colorado. Based on the ages of the vertebrate fossils, folding of the rocks and sediments in the North Park syncline may be much younger than about 16 Ma.Bedding characteristics of the North Park Formation suggest that (1) some or much of the sand, sandstone, and pebbly sandstone may have been deposited as sheetwash alluvium; (2) much of the siltstone may have been deposited as sheetwash alluvium or ephemeral pond or marsh deposits; (3) beds of sandy limestone probably were deposited as ephemeral pond or marsh deposits; and (4) altered tuff probably was deposited in ephemeral ponds or marshes. Most of the conglomerate and gravel in the North Park Formation are stream-channel deposits that were deposited by high-energy ephemeral or intermittent streams that issued from volcanic terrain rather than debris-flow deposits in relatively near-source fan deposits dominated by sediment gravity flow. Laccolithic doming, uplift, and tilting in the Never Summer Mountains near the Mount Richthofen stock, as well as the formation of volcanic edifices in the Never Summer Mountains and the Rabbit Ears Range during the late Oligocene and Miocene, significantly steepened stream gradients and greatly increased the erosive power and transport capacity of streams that transported large rock fragments and finer sediment eroded from volcanic and sedimentary sources and deposited them in the North Park Formation.Much of the material that makes up the rocks and sediments of the North Park Formation was derived from the erosion of volcanic, intrusive, and sedimentary rocks. Clasts in the North Park Formation were derived chiefly from the erosion of volcanic and intrusive igneous rocks of late Oligocene and Miocene age that range in composition from rhyolite to trachybasalt. These rocks are locally exposed along the west flank of the Never Summer Mountains, the north flank of the Rabbit Ears Range, and the east flank of the Park Range at and near Rabbit Ears Peak. The minor amount of igneous and metamorphic clasts of Proterozoic age in the North Park Formation are commonly composed of durable rock types that are resistant to both physical and chemical weathering. Many of these clasts may have been derived from the erosion of conglomerate and conglomeratic sandstone in the Coalmont Formation rather than from basement rocks currently at or near the ground surface in the Never Summer Mountains. Much of the sand and finer grained particles in the North Park Formation probably were derived from the erosion of sandstone, shale, and sandy claystone of the Coalmont Formation. Likewise, much of the abundant sand-sized quartz and feldspar in sand, sandstone, and pebbly sandstone of the North Park Formation probably was derived from the erosion of sandstone, conglomeratic sandstone, and conglomerate of the Coalmont Formation. Some of the fine sand, very fine sand, and silt in very fine grained sandstone and siltstone of the North Park Formation may be derived from the erosion of coeval eolian sand and loess in the Browns Park Formation that was transported across the Park Range by westerly or southwesterly winds.

Mechanisms and processes of stratal disruption and mixing in the development of mélanges and broken formations: Redefining and classifying mélanges

NASA Astrophysics Data System (ADS)

Festa, A.; Dilek, Y.; Pini, G. A.; Codegone, G.; Ogata, K.

2012-09-01

The terms mélange and broken formation have been used in different ways in the literature. The lack of agreement on their definition often leads to confusion and misinterpretations. An evaluation of the various uses of these terms allows us to consider several types of chaotic rock bodies originated by tectonic, sedimentary and diapiric processes in different tectonic settings. Our review of stratal disruption and mixing processes shows that there exists a continuum of deformation structures and processes in the generation of mélanges and broken formations. This continuum is directly controlled by the increase of the degree of consolidation with burial. In tectonically active environments, at the shallow structural levels, the occurrence of poorly consolidated sediments favors gravitational deformation. At deeper structural levels, the deformation related to tectonic forces becomes gradually more significant with depth. Sedimentary (and diapiric) mélanges and broken formations represent the products of punctuated stratal disruption mechanisms recording the instantaneous physical conditions in the geological environment at the time of their formation. The different kinematics, the composition and lithification degree of sediments, the geometry and morphology of the basins, and the mode of failure propagation control the transition between different types of mass-transported chaotic bodies, the style of stratal disruption, and the amount of rock mixing. Tectonically broken formations and mélanges record a continuum of deformation that occurs through time and different degrees of lithification during a progressive increase of the degree of consolidation and of the diagenetic and metamorphic mineral transformation. Systematic documentation of the mechanisms and processes of the formation of different broken formations and mélanges and their interplay in time and space are highly important to increase the understanding of the evolutionary history of accretionary wedges and orogenic belts.

Sedimentary provenance of Maastrichtian oil shales, Central Eastern Desert, Egypt

NASA Astrophysics Data System (ADS)

Fathy, Douaa; Wagreich, Michael; Mohamed, Ramadan S.; Zaki, Rafat

2017-04-01

Maastrichtian oil shales are distributed within the Central Eastern Desert in Egypt. In this study elemental geochemical data have been applied to investigate the probable provenance of the sedimentary detrital material of the Maastrichtian oil shale beds within the Duwi and the Dakhla formations. The Maastrichtian oil shales are characterized by the enrichment in Ca, P, Mo, Ni, Zn, U, Cr and Sr versus post-Archean Australian shales (PAAS). The chondrite-normalized patterns of the Maastrichtian oil shale samples are showing LREE enrichment, HREE depletion, slightly negative Eu anomaly, no obvious Ce anomaly and typical shale-like PAAS-normalized patterns. The total REE well correlated with Si, Al, Fe, K and Ti, suggesting that the REE of the Maastrichtian oil shales are derived from terrigenous source. Chemical weathering indices such as Chemical Index of Alteration (CIA), Chemical Proxy of Alteration (CPA) and Plagioclase Index of Alteration (PIA) indicate moderate to strong chemical weathering. We suggest that the Maastrichtian oil shale is mainly derived from first cycle rocks especially intermediate rocks without any significant inputs from recycled or mature sources. The proposed data illustrated the impact of the parent material composition on evolution of oil shale chemistry. Furthermore, the paleo-tectonic setting of the detrital source rocks for the Maastrichtian oil shale is probably related to Proterozoic continental island arcs

Geochemistry of host rocks in the Howards Pass district, Yukon-Northwest Territories, Canada: implications for sedimentary environments of Zn-Pb and phosphate mineralization

USGS Publications Warehouse

Slack, John F.; Falck, Hendrik; Kelley, Karen D.; Xue, Gabriel G.

2017-01-01

Detailed lithogeochemical data are reported here on early Paleozoic sedimentary rocks that host the large Howards Pass stratiform Zn-Pb deposits in Yukon-Northwest Territories. Redox-sensitive trace elements (Mo, Re, V, U) and Ce anomalies in members of the Duo Lake Formation record significant environmental changes. During the deposition of lower footwall units (Pyritic siliceous and Calcareous mudstone members), bottom waters were anoxic and sulphidic, respectively; these members formed in a marginal basin that may have become increasingly restricted with time. Relative to lower members, a major environmental change is proposed for deposition of the overlying Lower cherty mudstone member, which contains phosphorite beds up to ∼0.8 m thick in the upper part, near the base of the Zn-Pb deposits. The presence of these beds, together with models for modern phosphorite formation, suggests P input from an upwelling system and phosphorite deposition in an upper slope or outer shelf setting. The overlying Active mudstone member contains stratabound to stratiform Zn-Pb deposits within black mudstone and gray calcareous mudstone. Data for unmineralized black mudstone in this member indicate deposition under diverse redox conditions from suboxic to sulphidic. Especially distinctive in this member are uniformly low ratios of light to heavy rare earth elements that are unique within the Duo Lake Formation, attributed here to the dissolution of sedimentary apatite by downward-percolating acidic metalliferous brines. Strata that overlie the Active member (Upper siliceous mudstone member) consist mainly of black mudstone with thin (0.5–1.5 cm) laminae of fine-grained apatite, recording continued deposition on an upper slope or outer shelf under predominantly suboxic bottom waters. Results of this study suggest that exploration for similar stratiform sediment-hosted Zn-Pb deposits should include the outer parts of ancient continental margins, especially at and near stratigraphic transitions from marginal basin facies to overlying slope or shelf facies.

Geologic influence on induced seismicity: Constraints from potential field data in Oklahoma

USGS Publications Warehouse

Shah, Anjana K.; Keller, G. Randy

2017-01-01

Recent Oklahoma seismicity shows a regional correlation with increased wastewater injection activity, but local variations suggest that some areas are more likely to exhibit induced seismicity than others. We combine geophysical and drill hole data to map subsurface geologic features in the crystalline basement, where most earthquakes are occurring, and examine probable contributing factors. We find that most earthquakes are located where the crystalline basement is likely composed of fractured intrusive or metamorphic rock. Areas with extrusive rock or thick (>4 km) sedimentary cover exhibit little seismicity, even in high injection rate areas, similar to deep sedimentary basins in Michigan and western North Dakota. These differences in seismicity may be due to variations in permeability structure: within intrusive rocks, fluids can become narrowly focused in fractures and faults, causing an increase in local pore fluid pressure, whereas more distributed pore space in sedimentary and extrusive rocks may relax pore fluid pressure.

Teaching the Rock Cycle with Ease.

ERIC Educational Resources Information Center

Bereki, Debra

2000-01-01

Describes a hands-on lesson for teaching high school students the concept of the rock cycle using sedimentary, metamorphic, and igneous rocks. Students use a rock cycle diagram to identify pairs of rocks. From the rock cycle, students explain on paper how their first rock became the second rock and vice versa. (PVD)

Non-Hawaiian lithostratigraphy of Louisville seamounts and the formation of high-latitude oceanic islands and guyots

NASA Astrophysics Data System (ADS)

Buchs, David M.; Williams, Rebecca; Sano, Shin-ichi; Wright, V. Paul

2018-05-01

Guyots are large seamounts with a flat summit that is generally believed to form due to constructional biogenic and/or erosional processes during the formation of volcanic islands. However, despite their large abundance in the oceans, there are still very few direct constraints on the nature and formation of guyots, in particular those formed at high latitude that lack a thick cap of shallow-marine carbonate rocks. It is largely accepted based on geophysical constraints and surficial observations/sampling that the summit platform of these guyots is shaped by wave abrasion during post-volcanic subsidence of volcanic islands. Here we provide novel constraints on this hypothesis and the summit geology of guyots with a lithostratigraphic analysis of cores from three Louisville seamounts (South Pacific) collected during Expedition 330 of the Integrated Ocean Drilling Program (IODP). Thirteen lithofacies of sedimentary and volcanic deposits are described, which include facies not previously recognized on the top of guyots, and offer a new insight into the formation of high-latitude oceanic islands on a fast-moving plate. Our results reveal that the lithostratigraphy of Louisville seamounts preserves a very consistent record of the formation and drowning of volcanic islands, with from bottom to top: (i) volcaniclastic sequences with abundant lava-fed delta deposits, (ii) submarine to subaerial shield lava flows, (iii) post-volcanic shallow to deeper marine sedimentary rocks lacking thick reef deposits, (iv) post-erosional rejuvenated volcanic rocks, and (v) pelagic sediments. Recognition of erosional boundaries between subaerial lava flows and shallow-marine sedimentary rocks provides novel support for post-volcanic wave planation of guyots. However, the summit geology of Louisville seamounts is dissimilar to that of high-latitude Hawaiian-Emperor guyots that have emplaced in a similar tectonic and environmental setting and that include thicker lava stacks with apparently little lava-fed delta deposits. To explain observed lithostratigraphic discrepancy we propose that Louisville seamounts represent a distinct type of intraplate ocean volcano characterized by formation of a smaller island, with a central shield volcano surrounded by extended shallow-marine shelves formed by lava-fed deltas. In this interpretation the summit platform of Louisville-type guyots results from early (syn-volcanic) subaerial to shallow-marine constructional volcanic processes and marine erosion, enhanced by later (post-volcanic) wave planation. This contrasts with larger Hawaiian edifices that are capped by thicker shield volcanoes, and that develop an extended wave planation surface during post-volcanic subsidence (in the absence of efficient coral growth). The difference between Hawaiian- and Louisville-type volcanic islands and guyots can be explained by contrasted dynamic disequilibrium between magmatic growth, erosion, and subsidence during the island-building stage. Unlike Hawaiian-type volcanoes, Louisville seamounts are characterized by alkaline magmatism that extends from the late seamount to island stages. This supports more limited magmatic growth during the formation of Louisville islands, and we hypothesize that this promotes the formation of ephemeral shallow-marine platforms and extended lava-fed deltas. Hawaiian-type volcanoes and guyots are unusually large in the population of intraplate ocean volcanoes. Louisville-type guyots as defined in this study could therefore represent a very common but yet poorly documented mode of oceanic island formation in the Pacific Ocean and other similar fast-moving plate settings.

Petrographic and geochemical characteristic of volcanic rocks from Tasik Kenyir and Kampung Awah, East Malaya block, Peninsular Malaysia

NASA Astrophysics Data System (ADS)

Roselee, Muhammad Hatta; Umor, Mohd Rozi; Ghani, Azman Abdul; Badruldin, Muhamad Hafifi; Quek, Long Xiang

2018-04-01

Kampung Awah and Tasik Kenyir are geologically located in East Malaya Blocks. These block is also known as western margin of Indochina terrane. Apart from sedimentary formations, East Malaya Blocks is also dominated by plutonic and volcanic rocks of mafic to rhyolitic compositions. Petrography and geochemical data suggest that Kampung Awah and Tasik Kenyir are one of locations which consists of volcanic rocks of generally basaltic to basaltic andesite compositions. Volcanic rocks from both area consists of plagioclcase, clinopyroxene, orthpyroxene as main mineral constituents with minor occurrences of hornblende. Geochemical data also indicate that volcanic rocks from both area were formed during subduction of the Paleo-tethys oceanic underneath the East Malaya Block or Indochina terrane. Most of the samples are metaluminous which indicate the volcanics are derived from igneous origin. This paper will contribute new geochemical data of mafic volcanics from Kampung Awah and Tasik Kenyir with the support of petrographic and field evidence to deduce the magma evolution and the tectonic setting.

Talking Rocks.

ERIC Educational Resources Information Center

Rice, Dale; Corley, Brenda

1987-01-01

Discusses some of the ways that rocks can be used to enhance children's creativity and their interest in science. Suggests the creation of a dramatic production involving rocks. Includes basic information on sedimentary, igneous, and metamorphic rocks. (TW)

Synthesis of late Paleozoic and Mesozoic eolian deposits of the Western Interior of the United States

USGS Publications Warehouse

Blakey, R.C.; Peterson, F.; Kocurek, G.

1988-01-01

Late Paleozoic and Mesozoic eolian deposits include rock units that were deposited in ergs (eolian sand seas), erg margins and dune fields. They form an important part of Middle Pennsylvanian through Upper Jurassic sedimentary rocks across the Western Interior of the United States. These sedimentary rock units comprise approximately three dozen major eolian-bearing sequences and several smaller ones. Isopach and facies maps and accompanying cross sections indicate that most eolian units display varied geometry and complex facies relations to adjacent non-eolian rocks. Paleozoic erg deposits are widespread from Montana to Arizona and include Pennsylvanian formations (Weber, Tensleep, Casper and Quadrant Sandstones) chiefly in the Northern and Central Rocky Mountains with some deposits (Hermosa and Supai Groups) on the Colorado Plateau. Lower Permian (Wolfcampian) erg deposits (Weber, Tensleep, Casper, Minnelusa, Ingleside, Cedar Mesa, Elephant Canyon, Queantoweap and Esplanade Formations) are more widespread and thicken into the central Colorado Plateau. Middle Permian (Leonardian I) erg deposits (De Chelly and Schnebly Hill Formations) are distributed across the southern Colorado Plateau on the north edge of the Holbrook basin. Leonardian II erg deposits (Coconino and Glorieta Sandstones) are slightly more widespread on the southern Colorado Plateau. Leonardian III erg deposits formed adjacent to the Toroweap-Kaibab sea in Utah and Arizona (Coconino and White Rim Sandstones) and in north-central Colorado (Lyons Sandstone). Recognized Triassic eolian deposits include major erg deposits in the Jelm Formation of central Colorado-Wyoming and smaller eolian deposits in the Rock Point Member of the Wingate Sandstone and upper Dolores Formation, both of the Four Corners region. None of these have as yet received a modern or thorough study. Jurassic deposits of eolian origin extend from the Black Hills to the southern Cordilleran arc terrain. Lower Jurassic intervals include the Jurassic part of the Wingate Sandstone and the Navajo-Aztec-Nugget complex and coeval deposits in the arc terrain to the south and west of the Colorado Plateau. Major Middle Jurassic deposits include the Page Sandstone on the Colorado Plateau and the widespread Entrada Sandstone, Sundance Formation, and coeval deposits. Less extensive eolian deposits occur in the Carmel Formation, Temple Cap Sandstone, Romana Sandstone and Moab Tongue of the Entrada Sandstone, mostly on the central and western Colorado Plateau. Upper Jurassic eolian deposits include the Bluff Sandstone Member and Recapture Member of the Morrison Formation and Junction Creek Sandstone, all of the Four Corners region, and smaller eolian deposits in the Morrison Formation of central Wyoming and apparently coeval Unkpapa Sandstone of the Black Hills. Late Paleozoic and Mesozoic eolian deposits responded to changing climatic, tectonic and eustatic controls that are documented elsewhere in this volume. All of the eolian deposits are intricately interbedded with non-eolian deposits, including units of fluvial, lacustrine and shallow-marine origin, clearly dispelling the myth that eolian sandstones are simple sheet-like bodies. Rather, these units form some of the most complex bodies in the stratigraphic record. ?? 1988.

Publications - PIR 2016-1 | Alaska Division of Geological & Geophysical

Science.gov Websites

., LePain, D.L., and Stanley, R.G., 2016, Sedimentary petrology and reservoir quality of the Middle Jurassic ; Sedimentary; Sedimentary Rocks; Slope; Snug Harbor Siltstone Member; Stratigraphy; Tuxedni Bay Top of Page

Petrology and sedimentology of the Horlick Formation (Lower Devonian), Ohio Range, Transantarctic Mountains

USGS Publications Warehouse

McCartan, Lucy; Bradshaw, Margaret A.

1987-01-01

The Horlick Formation of Early Devonian age is as thick as 50 m and consists of subhorizontal, interbedded subarkosic sandstone and chloritic shale and mudstone. The Horlick overlies an erosion surface cut into Ordovician granitic rocks and is, in turn, overlain by Carboniferous and Permian glacial and periglacial deposits. Textures, sedimentary structures, and ubiquitous marine body fossils and animal traces suggest that the Horlick was deposited on a shallow shelf having moderate wave energy and a moderate tidal range. The source terrane probably lay to the north, and longshore transport was toward the west.

Laboratory Simulations of Permeability Pertaining to Biosignature Development and Preservation Potential for Martian Subsurface Habitability

NASA Astrophysics Data System (ADS)

Perl, S. M.; Corsetti, F. A.; Berelson, W.; Nealson, K. H.; Bhartia, R.

2014-12-01

Sedimentological and mineralogical observations indicate that sandstones within the Eagle and Endurance crater sections of the Burns Formation of Meridiani Planum, Mars, were derived from sulfate-bearing altered basalt, possibly from a playa lake, and deposited by eolian and locally subaqueous processes in a eolian dune - sand sheet - interdune setting. Abrasion of rocks within the outcrop outlining Endurance Crater by the MER rover Opportunity revealed void spaces later determined to be secondary pore space created from the dissolution of soluble minerals from multiple groundwater movement (recharge) events. Previous investigations into the secondary porosity and permeability of rocks within the Karatepe section showed that the ability for fluid movement through the vertical sedimentary section was greatest between the Upper and Middle units at the Whatanga contact within Endurance Crater, where secondary porosity was measured to be ~40% of the rock. Our investigations into quantifying subsurface habitability involve simulating the paleo-groundwater environments on the micro-to-mesoscale (sub mm-scale to cm-scale) to determine how preservation potential changes with repeated water-rock interaction, varying fluid chemistry (pH, salinity, T, others), and pressure changes under Earth and Mars conditions. In addition to fluids, microbes (extremophiles) will be introduced into our simulation to observe how changing experimental input conditions impact the growth and development of biotic interactions and eventually biosignatures left behind within sedimentary microtextures. Moreover, detection of biosignatures using visual and UV methods will help inform the M2020 rover mission regarding in-situ analysis of abraded rock outcrops. Finally, results of this work will use terrestrial rocks and fluids from a known Mars analogue (the Rio Tinto basin) in order to aid in determining habitability and survivability in acidic and high saline conditions that are similar to Meridiani Planum, Mars.

A geological and geochemical reconnaissance of the Tathlith one-degree quadrangle, sheet 19/43, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, William C.

1978-01-01

The Tathlith one-degree quadrangle occupies an area of 11,620 sq km in the northeastern Asir region of the Kingdom of Saudi Arabia, in the southeastern part of the Precambrian shield. In the eastern part of the quadrangle the Precambrian rocks are covered by exposures of easterly-dipping sandstone of Cambrian or Ordovician age. A well-developed and highly integrated drainage system trending northward is worn into the Precambrian rocks, but for most of the year the wadis are dry. The Precambrian rocks of the quadrangle consist of an old, non-metamorphosed to variably metamorphosed sequence of volcanic and sedimentary rocks intruded by three main successions of plutonic and hypabyssal igneous rocks. The interlayered volcanic and sedimentary rocks occupy arcuate, north-trending fold belts in which old, rather tight north-trending folds have been refolded at least once by open folds with nearly east-trending axes. Old, north-trending left-lateral faults are associated with the fold belts and are themselves intersected by younger, northwest-trending faults. Motion on both sets of faults has been reactivated several times. The interlayered volcanic and sedimentary rocks are an eugeosynclinal sequence of graywacke and andesite with sparse marble, quartzite, and rhyolite. Andesite is the dominant component of the sequence. Plutonic or hypabyssal equivalents of the andesite intrude the volcanic-sedimentary sequence. In many places these rocks are essentially non-metamorphosed, but elsewhere they are faintly to strongly metamorphosed, or even polymetamorphosed. Dynamothermal metamorphism associated with the northerly folding, and contact metamorphism are the principal kinds of metamorphism. The metamorphic grade is mostly greenschist facies or albite-epidote amphibolite facies. The largest intrusive in the area is a batholith of regional dimension, the east side of which intrudes and divides the fold belts. Granite gneiss and granodiorite gneiss are the main components of the batholith. Biotite granite of calc-alkaline composition, and somewhat younger than the granite gneiss and granodiorite gneiss, forms northerly elongate to subcircular plutons in the gneisses and the rocks of the volcanic-sedimentary sequence.

Geology of the Blue Mountains region of Oregon, Idaho, and Washington; stratigraphy, physiography, and mineral resources of the Blue Mountains region

USGS Publications Warehouse

Vallier, T. L.; Brooks, H.C.

1994-01-01

PART 1: Stratigraphic and sedimentological analysis of sedimentary sequences from the Wallowa terrane of northeastern Oregon has provided a unique insight into the paleogeography and depositional history of the terrane, as well as establishing important constraints on its tectonic evolution and accretionary history. Its Late Triassic history is considered here by examining the two most important sedimentary units in the Wallowa terrane-the Martin Bridge Limestone and the Hurwal Formation. Conformably overlying epiclastic volcanic rocks of the Seven Devils Group, the Martin Bridge Limestone comprises shallow-water platform carbonate rocks and deeper water, off-platform slope and basin facies. Regional stratigraphic and tectonic relations suggest that the Martin Bridge was deposited in a narrow, carbonate-dominated (forearc?) basin during a lull in volcanic activity. The northern Wallowa platform was a narrow, rimmed shelf delineated by carbonate sand shoals. Interior parts of the shelf were characterized by supratidal to shallow subtidal carbonates and evaporites, which were deposited in a restricted basin. In the southern Wallowa Mountains, lithofacies of the Martin Bridge are primarily carbonate turbidites and debris flow deposits, which accumulated on a carbonate slope apron adjacent to the northern Wallowa rimmed shelf from which they were derived. Drowning of the platform in the latest Triassic, coupled with a renewed influx of volcanically derived sediments, resulted in the progradation of fine-grained turbidites of the Hurwal Formation over the carbonate platform. Within the Hurwal, Norian conglomerates of the Excelsior Gulch unit contain exotic clasts of radiolarian chert, which were probably derived from the Bakei terrane. Such a provenance provides evidence of a tectonic link between the Baker and Wallowa terranes as early as the Late Triassic, and offers support for the theory that both terranes were part of a more extensive and complex Blue Mountains island-arc terrane. PART 2: Mesozoic rocks exposed along the Snake River in the northern Wallowa terrane represent a volcanic island and its associated sedimentary basins within the Blue Mountains island arc of Washington, Oregon, and Idaho. In the northern part of the Wallowa terrane, rock units include the Wild Sheep Creek, Doyle Creek, and Coon Hollow Formations, the (informal) Imnaha intrusion, and the (informal) Dry Creek stock. The volcanic rocks of the Ladinian to Karnian Wild Sheep Creek Formation show two stages of evolution-an early dacitic phase Gower volcanic faciesY and a late mafic phase (upper volcanic facies). The two volcanic facies are separated by eruption-generated turbidites of siliceous argillites and arkosic arenites (argillitesandstone facies). The two magmatic phases of the Wild Sheep Creek Formation may be recorded by the compositional zoning from older quartz diorite and diorite to younger gabbro in the Imnaha intrusion. Although the Late Triassic Imnaha intrusion is in fault contact with the Wild Sheep Creek Formation, it may be a subduction-related pluton and was the likely magma source for the Wild Sheep Creek Formation. Interbedded with the upper volcanic facies are eruption-generated turbidite and debris flow deposits (sandstone-breccia facies) and thick carbonate units (limestone facies). The limestone facies consists of two marker units, which may represent carbonate platform environments. Clast imbrication, fossil orientation, and cross-stratification in the Wild Sheep Creek Formation indicate a shoaling to subaerial volcanic island to the south and southeast; sediment was transported to the north and northwest. The Karnian Doyle Creek Formation consists largely of epiclastic conglomerate, sandstone, and shale that were deposited in welloxygenated basins. Vitric tuffs interbedded with these sediments suggest shallow or subaerial pyroclastic eruptions. Quartz diorite clasts in this formation may indicate uplift

Correlation of cerium anomalies with indicators of paleoenvironment

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacLeod, K.G.; Irving, A.J.

1996-09-01

Among 21 whole-rock samples of the Upper Cretaceous Niobrara Formation from Colorado, the abundance of cerium relative to other rate earth elements (Ce anomaly), the weight percent organic carbon (%C{sub org}), and the intensity of bioturbation all covary. This covariation is provocative because %C{sub org} and intensity of bioturbation track changes in the concentration of oxygen in the local water column at the time of deposition (Savrda and Bottjer 1989). Ce anomalies in apatite-rich fractions of the Maastrichtian Zumaya-Algorta Formation from France and Spain and the Miocene Monterey Formation from California show changes that also may coincide with changes inmore » ancient oxygen levels. Results for the Niobrara samples are the closest correspondence demonstrated between paleo-redox conditions and Ce anomalies, but the authors cannot yet determine whether the correspondence reflects a cause-and-effect relationship. Variation in Ce anomalies is influenced by a number of factors, including terrigenous input, depositional environment, and diagenetic conditions. Potential interplay of these factors prevents a unique interpretation of the whole-rock data; dissecting whole-rock Ce anomalies through analysis of isolated sedimentary components, though, is a promising avenue of research.« less

Regional Comparison of Detrital Zircon Populations in Syn-rift, Jurassic Rocks from the Northern Gulf of Mexico to Northern South America

NASA Astrophysics Data System (ADS)

Kouassi, M.

2016-12-01

We have compiled over 3200 detrital zircon ages in rock samples collected by various groups of previous workers that range in age from Cambrian to Cenozoic and cover the area of rifting between southern North America, Mexico, the Caribbean, and northern South America. We focussed this study on age populations in Jurassic sedimentary rocks from localities in the southern USA, Mexico, and Colombia to identify similar age populations that could constrain the relative locations of the various blocks during the period of Pangea's breakup and the formation of the Gulf of Mexico and Proto-Caribbean seaway. Jurassic samples from the Mixteca and Maya blocks of southern Mexico, the Norphlet Formation of Alabama and the Giron Formation of Eastern Cordillera of Colombia revealed a good correlation with correlative age populations of 900-1200 Ma and 200- 400 Ma. These results indicate that in a closed fit reconstruction all of these areas may have been overlain by common basin that covered the present-day area of the GOM, Yucatan block, and northern South America. We point out key areas for future sampling and dating that will help expand this study.

Quantitative kinematic analysis within the Khlong Marui shear zone, southern Thailand

NASA Astrophysics Data System (ADS)

Kanjanapayont, Pitsanupong; Grasemann, Bernhard; Edwards, Michael A.; Fritz, Harald

2012-02-01

The NNE trending Khlong Marui shear zone has a strong geomorphic signal with marked fault-strike parallel topographic ridges. The lithologies within the strike-slip zone mainly consist of vertical layers of mylonitic meta-sedimentary rocks associated with orthogneisses, mylonitic granites, and pegmatitic veins. The pegmatitic veins concordantly intrude the mylonitic foliation but were sheared at the rims indicating syn-kinematic emplacement. Microstructures and mineral assemblages suggest that the rocks in the area have been metamorphosed at amphibolite facies and low to medium greenschist facies by the first deformation. The Khlong Marui shear zone was deformed under dextral simple shear flow with a small finite strain. The ductile-to-brittle deformation involves a period of exhumation of lenses of higher grade rocks together with low grade fault rocks probably associated with positive flower structures. The final stage brittle deformation is reflected by normal faulting and formation of proto-cataclasites to cataclasites of the original mylonitic meta-sedimentary host rock. Although clear age-constraints are still missing, we use regional relationships to speculate that earlier dextral strike-slip displacement of the Khlong Marui shear zone was related to the West Burma and Shan-Thai collision and subduction along the Sunda Trench in the Late Cretaceous, while the major exhumation period of the ductile lens was tectonically influenced by the early India-Asia collision. The changing stress field has responded by switching from dextral strike-slip to normal faulting in the Khlong Marui shear zone, and is associated with "escape tectonics" arising from the overall India-Asia collision.

Significance of tourmaline-rich rocks in the north range group of the cuyuna iron range, East-Central Minnesota

USGS Publications Warehouse

Cleland, J.M.; Morey, G.B.; McSwiggen, P.L.

1996-01-01

Concentrations of tourmaline in Early Proterozoic metasedirnentary rocks of the Cuyuna iron range, east-central Minnesota, provide a basis for redefinition of the evolutionary history of the area. Manganiferous iron ore forms beds within the Early Proterozoic Trommald Formation, between thick-bedded granular iron-formation having shallow-water depositional attributes and thin-bedded, nongranular iron-formation having deeper water attributes. These manganese-rich units were previously assumed to be sedimentary in origin. However, a revaluation of drill core and mine samples from the Cuyuna North range has identified strata-bound tourmaline and tourmalinite, which has led to a rethinking of genetic models for the geology of the North range. We interpret the tourmaline-rich rocks of the area to be a product of submarine-hydrothermal solutions flowing along and beneath the sedirnent-seawater interface. This model for the depositional environment of the tourmaline is supported by previously reported mineral assemblages within the Trommald Formation that comprise aegirine; barium feldspar; manganese silicates, carbonates, and oxides; and Sr-rich barite veins. In many places, tourmaline-rich metasedimentary rocks and tourmalinites are associated locally with strata-bound sulfide deposits. At those localities, the tourmaline-rich strata are thought to be lateral equivalents of exhalative sulfide zones or genetically related subsea-floor replacements. On the basis of the occurrence of the tourmaline-rich rocks and tourmalinites, and on the associated minerals, we suggest that there is a previously unrecognized potential for sediment-hosted sulfide deposits in the Cuyuna North range.

Meridiani Planum Hematite Deposit: Potential for Preservation of Microfossils

NASA Technical Reports Server (NTRS)

Allen, C. C.; Westall, F.; Longazo, T. G.; Schelble, R. T.; Probst, L. W.; Flood, B. F.

2003-01-01

Christensen et al., using data from the Mars Global Surveyor Thermal Emission Spectrometer (TES), have identified gray crystalline hematite in a 350 km by 750 km region near Meridiani Planum. The deposit corresponds closely to the low-albedo highlands unit sm, mapped as a wind-eroded, ancient, subaqueous sedimentary deposit. Christensen et al. interpreted the Meridiani Planum deposit to be an in-place, rock-stratigraphic sedimentary unit characterized by smooth, friable layers composed primarily of basaltic sediments with approximately 10 to 15% crystalline gray hematite. The Meridiani Planum hematite deposit has recently been designated as the prime landing site for one of the two Mars Exploration Rover (MER) spacecraft. The MER landings are scheduled for January, 2004. Christensen et al. discussed five possible mechanisms for the formation of this deposit: direct precipitation from standing, oxygenated, Fe-rich water; precipitation from Fe-rich hydrothermal fluids; low-temperature dissolution and precipitation through mobile groundwater leaching; surface weathering and coatings; thermal oxidation of magnetite-rich lavas. Four of these mechanisms involve the interactions of rock with water, and thus have implications in the search for evidence of microbial life.

Siberian Platform: Geology and Natural Bitumen Resources

USGS Publications Warehouse

Meyer, Richard F.; Freeman, P.A.

2006-01-01

Summary: The Siberian platform is located between the Yenisey River on the west and the Lena River on the south and east. The Siberian platform is vast in size and inhospitable in its climate. This report is concerned principally with the setting, formation, and potential volumes of natural bitumen. In this report the volumes of maltha and asphalt referred to in the Russian literature are combined to represent natural bitumen. The generation of hydrocarbons and formation of hydrocarbon accumulations are discussed. The sedimentary basins of the Platform are described in terms of the Klemme basin classification system and the conditions controlling formation of natural bitumen. Estimates of in-place bitumen resources are reviewed and evaluated. If the bitumen volume estimate is confined to parts of identified deposits where field observations have verified rock and bitumen grades values, the bitumen resource amounts to about 62 billion barrels of oil in-place. However, estimates of an order of magnitude larger can be obtained if additional speculative and unverified rock volumes and grade measures are included.

Paleogeographic setting of Pennsylvanian Tyler formation and relation to underlying Mississippian rocks in Montana and North Dakota

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maughan, E.K.

Pennsylvanian sedimentary rocks in the northern Rocky Mountains and in the northern Great Plains of the United States were deposited primarily on a broad marine shelf between the North American craton and the late Paleozoic continental margin in Idaho and adjacent states. The Lower Pennsylvanian (Morrowan) Tyler Formation comprises detrital sediments and some limestone beds in Montana and North Dakota that were deposited along an eastward-transgressing marine shoreline after regional uplift, warping, and faulting had resulted in an erosional unconformity on top of Mississippian strata. The Lower Pennsylvanian shoreline finally extended onto the cratonic interior in eastern North Dakota. Initialmore » Tyler sediments were deposited as a deltaic and fluviolacustrine complex succeeded by littoral deposits as the Early Pennsylvanian shoreline transgressed eastward across the shelf. The Tyler Formation is subdivided into the Stonehouse Canyon Member at the base, the Bear Gulch Member, and the Cameron Creek Member at the top.« less

Reactive transport and mass balance modeling of the Stimson sedimentary formation and altered fracture zones constrain diagenetic conditions at Gale crater, Mars

NASA Astrophysics Data System (ADS)

Hausrath, E. M.; Ming, D. W.; Peretyazhko, T. S.; Rampe, E. B.

2018-06-01

On a planet as cold and dry as present-day Mars, evidence of multiple aqueous episodes offers an intriguing view into very different past environments. Fluvial, lacustrine, and eolian depositional environments are being investigated by the Mars Science Laboratory Curiosity in Gale crater, Mars. Geochemical and mineralogical observations of these sedimentary rocks suggest diagenetic processes affected the sediments. Here, we analyze diagenesis of the Stimson formation eolian parent material, which caused loss of olivine and formation of magnetite. Additional, later alteration in fracture zones resulted in preferential dissolution of pyroxene and precipitation of secondary amorphous silica and Ca sulfate. The ability to compare the unaltered parent material with the reacted material allows constraints to be placed on the characteristics of the altering solutions. In this work we use a combination of a mass balance approach calculating the fraction of a mobile element lost or gained, τ, with fundamental geochemical kinetics and thermodynamics in the reactive transport code CrunchFlow to examine the characteristics of multiple stages of aqueous alteration at Gale crater, Mars. Our model results indicate that early diagenesis of the Stimson sedimentary formation is consistent with leaching of an eolian deposit by a near-neutral solution, and that formation of the altered fracture zones is consistent with a very acidic, high sulfate solution containing Ca, P and Si. These results indicate a range of past aqueous conditions occurring at Gale crater, Mars, with important implications for past martian climate and environments.

Integration of 3 Consecutive Years of Aqueous Geochemistry Monitoring Serpentinization at the Coast Range Ophiolite Microbial Observatory (CROMO), Northern California, USA

NASA Astrophysics Data System (ADS)

Cardace, D.; Hoehler, T. M.; McCollom, T. M.; Schrenk, M. O.; Kubo, M. D.

2014-12-01

In August 2011, a set of 8 groundwater monitoring wells were established in actively serpentinizing ultramafic rocks of the Coast Range Ophiolite near Lower Lake, CA, as a NASA Astrobiology Institute project (Cardace et al., 2013). These wells have enabled repeated sampling and analysis of aqueous geochemistry, which we now present in an integrated model of the progress of serpentinization at this locality. The Coast Range Ophiolite Microbial Observatory (CROMO) plumbs groundwaters percolating through a tectonic mélange of Jurassic-aged oceanic crust, with blocks of metabasalt and metagabbro, variably serpentinized ultramafics, Great Valley Sequence sedimentary rocks including the Jurassic Knoxville formation and the Cretaceous Crack Canyon formation, as well as rocks resulting from silica-carbonate alteration of serpentinites (marginal listvenites). All of these rock units are accessible in the McLaughlin Natural Reserve (administered by the University of California-Davis). In this work, we report on persistent geochemical trends in CROMO waters, which are gas-rich, high pH (11+), Ca2+-OH- type waters, contrast their characteristics with other continental sites of serpentinization and deep sea serpentinizing vent systems, and place the evolution of these waters in a water-rock reaction context based on geochemical modeling.

Uranium favorability of tertiary rocks in the Badger Flats, Elkhorn Thrust Area, Park and Teller Counties, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, P.; Mickle, D.G.

1976-10-01

Uranium potential of Tertiary rocks in the Badger Flats--Elkhorn Thrust area of central Colorado is closely related to a widespread late Eocene erosion surface. Most uranium deposits in the area are in the Eocene Echo Park Alluvium and Oligocene Tallahassee Creek Conglomerate, which were deposited in paleodrainage channels on or above this surface. Arkosic detritus within the channels and overlying tuffaceous sedimentary rocks of the Antero and Florissant Formations of Oligocene age and silicic tuffs within the volcanic units provide abundant sources of uranium that could be concentrated in the channels where carbonaceous debris facilitates a reducing environment. Anomalous soil,more » water, and stream-sediment samples near the Elkhorn Thrust and in Antero basin overlie buried channels or are offset from them along structural trends; therefore, uranium-bearing ground water may have moved upward from buried uranium deposits along faults. The area covered by rocks younger than the late Eocene erosion surface, specifically the trends of mapped or inferred paleochannels filled with Echo Park Alluvium and Tallahassee Creek Conglomerate, and the Antero Formation are favorable for the occurrence of uranium deposits.« less

Petroleum geology and resources of the West Siberian Basin, Russia

USGS Publications Warehouse

Ulmishek, Gregory F.

2003-01-01

The West Siberian basin is the largest petroleum basin in the world covering an area of about 2.2 million km2. The basin occupies a swampy plain between the Ural Mountains and the Yenisey River. On the north, the basin extends offshore into the southern Kara Sea. On the west, north, and east, the basin is surrounded by the Ural, Yenisey Ridge, and Turukhan-Igarka foldbelts that experienced major deformations during the Hercynian tectonic event and the Novaya Zemlya foldbelt that was deformed in early Cimmerian (Triassic) time. On the south, the folded Caledonian structures of the Central Kazakhstan and Altay-Sayan regions dip northward beneath the basin?s sedimentary cover. The basin is a relatively undeformed Mesozoic sag that overlies the Hercynian accreted terrane and the Early Triassic rift system. The basement is composed of foldbelts that were deformed in Late Carboniferous?Permian time during collision of the Siberian and Kazakhstan continents with the Russian craton. The basement also includes several microcontinental blocks with a relatively undeformed Paleozoic sedimentary sequence. The sedimentary succession of the basin is composed of Middle Triassic through Tertiary clastic rocks. The lower part of this succession is present only in the northern part of the basin; southward, progressively younger strata onlap the basement, so that in the southern areas the basement is overlain by Toarcian and younger rocks. The important stage in tectono-stratigraphic development of the basin was formation of a deep-water sea in Volgian?early Berriasian time. The sea covered more than one million km2 in the central basin area. Highly organic-rich siliceous shales of the Bazhenov Formation were deposited during this time in anoxic conditions on the sea bottom. Rocks of this formation have generated more than 80 percent of West Siberian oil reserves and probably a substantial part of its gas reserves. The deep-water basin was filled by prograding clastic clinoforms during Neocomian time. The clastic material was transported by a system of rivers dominantly from the eastern provenance. Sandstones within the Neocomian clinoforms contain the principal oil reservoirs. The thick continental Aptian?Cenomanian Pokur Formation above the Neocomian sequence contains giant gas reserves in the northern part of the basin. Three total petroleum systems are identified in the West Siberian basin. Volumes of discovered hydrocarbons in these systems are 144 billion barrels of oil and more than 1,300 trillion cubic feet of gas. The assessed mean undiscovered resources are 55.2 billion barrels of oil, 642.9 trillion cubic feet of gas, and 20.5 billion barrels of natural gas liquids. The largest known oil reserves are in the Bazhenov-Neocomian total petroleum system that includes Upper Jurassic and younger rocks of the central and southern parts of the basin. Oil reservoirs are mainly in Neocomian and Upper Jurassic clastic strata. Source rocks are organic-rich siliceous shales of the Bazhenov Formation. Most discovered reserves are in structural traps, but stratigraphic traps in the Neocomian clinoform sequence are pro-ductive and are expected to contain much of the undiscovered resources. Two assessment units are identified in this total petroleum system. The first assessment unit includes all conventional reservoirs in the stratigraphic interval from the Upper Jurassic to the Cenomanian. The second unit includes unconventional (or continuous), self-sourced, fractured reservoirs in the Bazhenov Formation. This unit was not assessed quantitatively. The Togur-Tyumen total petroleum system covers the same geographic area as the Bazhenov-Neocomian system, but it includes older, Lower?Middle Jurassic strata and weathered rocks at the top of the pre-Jurassic sequence. A Callovian regional shale seal of the Abalak and lower Vasyugan Formations separates the two systems. The Togur-Tyumen system is oil-prone; gas reserves are insignificant. The principal o

Tectonics of Chukchi Sea Shelf sedimentary basins and its influence on petroleum systems

NASA Astrophysics Data System (ADS)

Agasheva, Mariia; Antonina, Stoupakova; Anna, Suslova; Yury, Karpov

2016-04-01

The Chukchi Sea Shelf placed in the East Arctic offshore of Russia between East Siberian Sea Shelf and North Slope Alaska. The Chukchi margin is considered as high petroleum potential play. The major problem is absence of core material from drilling wells in Russian part of Chukchi Shelf, hence strong complex geological and geophysical analyses such as seismic stratigraphy interpretation should be provided. In addition, similarity to North Slope and Beaufort Basins (North Chukchi) and Hope Basin (South Chukchi) allow to infer the resembling sedimentary succession and petroleum systems. The Chukchi Sea Shelf include North and South Chukchi Basins, which are separated by Wrangel-Herald Arch and characterized by different opening time. The North Chukchi basin is formed as a general part of Canada Basin opened in Early Cretaceous. The South Chukchi Basin is characterized by a transtensional origin of the basin, this deformation related to motion on the Kobuk Fault [1]. Because seismic reflections follow chronostratigraphic correlations, it is possible to achieve stratigraphic interpretation. The main seismic horizons were indicated as: PU, JU, LCU, BU, mBU marking each regional unconformities. Reconstruction of main tectonic events of basin is important for building correct geological model. Since there are no drilling wells in the North and South Chukchi basins, source rocks could not be proven. Referring to the North Chukchi basin, source rocks equivalents of Lower Cretaceous Pebble Shale Formation, Lower Jurassic Kingdak shales and Upper Triassic Shublik Formation (North Slope) is possible exhibited [2]. In the South Chukchi, it is possible that Cretaceous source rocks could be mature for hydrocarbon generation. Erosions and uplifts that could effect on hydrocarbon preservation was substantially in Lower Jurassic and Early Cretaceous periods. Most of the structures may be connected with fault and stratigraphy traps. The structure formed at Wrangel-Herald Arch to North-Chukchi through similar to well-known structure in Norwegian part of Barents Sea - Loppa High. In South Chukchi basin, the seismic wave shows interesting structures akin to diaper fold. Inversion-related anticlines and stratigraphic pinch-outs traps could presence in Cretaceous-Cenozoic cross section. As a result, we gathered and analyzed source rocks and reservoir analogs and gained improved sedimentary models in Eastern Russian Shelfs (Laptev, East Siberian and Chukchi Seas). Appropriate tectonic conditions, proven by well testing source rocks in North Slope and high thickness of basins suggest a success of hydrocarbon exploration in Russian part of Chukchi Sea Shelf. [1] Verzhbitsky V. E., S. D. Sokolov, E. M. Frantzen, A. Little, M. I. Tuchkova, and L.I. Lobkovsky, 2012, The South Chukchi Sedimentary Basin (Chukchi Sea, Russian Arctic): Age, structural pattern,and hydrocarbon potential, in D. Gao, ed., Tectonics and sedimentation: Implications for petroleum systems: AAPG Memoir 100, p.267-290. [2] Peters K. E., Magoon L. B., Bird K. J., Valin Z. C., Keller M. A. North Slope, Alaska: Source rock distribution, richness, thermal maturity, and petroleum charge AAPG Bulletin, V. 90, No. 2 (February 2006), 2006, P. 261-292.

Vertical Profiles Of 226Ra, 232Th And 40K Activities In Rocks From The Irati Formation Of The Paraná Sedimentary Basin, Southern Brazil

NASA Astrophysics Data System (ADS)

Ferreira, Ademar de O.; Bastos, Rodrigo O.; Appoloni, Carlos R.

2008-08-01

Naturally occurring radioisotopes are present in different concentrations in sedimentary rocks, reflecting the origin of the sediments, the depositional environment, and more recent events such as weathering and erosion. Using a high-resolution γ-ray spectrometry methodology, sedimentary rocks were measured to assess the concentration activities of the natural radioisotopes. The surveyed rocks are from the Irati formation in the Paraná sedimentary basin, which are exposed by an abandoned, open-pit limestone mine, in the city of Sapopema, southern Brazil. The exposed vertical profile is 5 m, and its stratigraphy is represented by an alternation of limestone and bituminous shale (layers being a few decimeters thick), and some millimeter rhythm layers with limestone and bituminous shale laminas. Eleven samples were collected along this profile, each of them dried in the open air during 48 hours, sieved through 4 mm mesh and sealed in cylindrical recipients. Measurements were accomplished using a 66% relative efficiency HPGE detector connected to a standard gamma ray spectrometry electronic chain. The detector efficiency in the range of 60 to 1800 keV was carried out with the certified IAEA-385 sediment sample. The Lower Limit of Detection (LLD) to the system is 2.40 Bqṡkg-1 for 226Ra, 1.84 Bqṡkg-1 for 232Th and 4.20 Bqṡkg-1 for 40K. Activity concentrations were determined for 226Ra (from 16.22 to 151.55 Bqṡkg-1), 232Th (from 2.93 to 56.12 Bqṡkg-1) and 40K (from 38.45 to 644.63 Bqṡkg-1). The layers enriched with organic matter presented the higher values of activity. The measured concentrations of the natural radioisotopes were lower for limestone samples (average values and respective deviations were 22.81±0.22 Bqṡkg-1 for 226Ra, 4.21±0.07 Bqṡkg-1 for 232Th, and 50.11±0.82 Bqṡkg-1 for 40K). Higher concentrations were measured for the bituminous shale samples (average values and respective deviations were 108.10±12.17 Bqṡkg-1 for 226Ra, 43.69±0.30 Bqṡkg-1 for 232Th, and 465.82±3.99 Bqṡkg-1 for 40K). The concentrations were intermediate for the rhythmite samples (average values and respective deviations were 50.69±1.09 Bqṡkg-1 for 226Ra, 7.63±0.21 Bqṡkg-1 for 232Th, and 85.96±2.47 Bqṡkg-1 for 40K). As the analyzed rocks are raw materials for the ceramic, cement and soil correction compound industries, the results of this work furnish data to estimate the contribution of these products to the general public's radiation exposure.

Metallogeny of the Mont-de-l'Aigle IOCG deposit, Gaspé Peninsula, Québec, Canada

NASA Astrophysics Data System (ADS)

Simard, M.; Beaudoin, G.; Bernard, J.; Hupé, A.

2006-09-01

The Mont-de-l’Aigle deposit is located in the northern part of Dome Lemieux, in the Connecticut Valley-Gaspé Synclinorium, Gaspé Peninsula, Québec. The Dome Lemieux is a subcircular antiform of Siluro-Devonian sedimentary rocks that is cut by numerous mafic and felsic sills and dikes of Silurian to Late Devonian age. Plutonism occurred in a continental within-plate extensional setting typical of orogenic collapse. The Cu-Fe (± Au) mineralization of Mont-de-l’Aigle occurs in veins, stockworks, and breccias. Mineralization is located near or within N-S and NW-SE faults cutting sedimentary rocks. IOCG mineralization postdates intrusions, skarns, hornfels, and epithermal mineralization typical of the southern part of the Dome Lemieux. The paragenetic sequence comprises: (1) pervasive sodic, potassic, chlorite, and silica alteration, (2) hematite, quartz, pyrite, magnetite, and chalcopyrite veins, stockworks and breccias and, (3) dolomite ± hematite veins and veinlets cutting the earlier mineralization. Intrusions display proximal sodic and potassic alteration, whereas sedimentary rocks have proximal decalcification, silicification, and potassic alteration. Both intrusive and sedimentary rocks are affected by a pervasive distal chlorite (± silica) alteration. The sulfur isotope composition of pyrite and chalcopyrite (δ34S=-1.5 to 4.8‰) suggests that sulfur was derived mainly from igneous rocks. Fluid δ18O (-0.4 to 2.65‰) indicates meteoric or seawater that reacted with the country rocks. Mixing of hot magmatic fluids with a cooler fluid, perhaps meteoric or seawater is suggested for mineral deposition and alteration of the Mont-de-l’Aigle deposit. The mineralogy, alteration, and sulfur isotope composition of the Mont-de-l’Aigle deposit compare well with IOCG deposits worldwide, making the Mont-de-l’Aigle deposit a rare example of Paleozoic IOCG mineralization, formed at shallow depth, within a low metamorphic grade sedimentary rock sequence.

Stratigraphy, petrography, and provenance of Archean sedimentary rocks of the Nsuze Group, Pongola Supergroup, in the Wit M'folozi Inlier, South Africa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamero de Villarroel, H.; Lowe, D.R.

1993-02-01

The Upper Archean Pongola Supergroup is a succession of clastic and volcanic rocks that represents the oldest relatively unmetamorphosed sedimentary sequence deposited on the basement of the 3.5-3.2 Ga-old Kaapvaal Craton. The Pongola Supergroup includes two subdivisions, the Nsuze and the Mozaan Groups. The Nsuze Group is composed of clastic rocks, minor carbonate units, and basalt. Nsuze sandstones are dominated by granite-derived sediments, and minor basaltic-derived detritus. Most Nsuze sedimentary rocks are sandstones that include both quartz-fieldspar and lithic-rich varieties. The mineralogy of Nsuze sandstones reflects the mixing of debris derived from two distinctive sources: (1) a sialic plutonic sourcemore » yielding quartz and microcline and (2) a basaltic source yielding basaltic lithic detritus and plagioclase. The most likely source rocks for the Nsuze sandstones in the Wit M'folozi Inlier were Archean granitic basement, represented by the Mpuluzi batholith, and Nsuze basaltic volcanic rocks. Both continental arc and rift settings have been proposed for the Pongola Supergroup. Nsuze sandstones show similarities to continental arc sandstone suites. However, there is no report of the existence of high standing stratovolcanoes, calc-alkaline plutonism, or contact and regional metamorphism of the intruded volcanic-sedimentary and basement rocks in the Pongola basin, features that are typically associated with continental arcs. The dominance of continent-derived detritus in the Nsuze Group argues that volcanic rocks made up a minor part of the exposed source area and that volcanism was largely restricted to the basin of deposition. Collectively, available evidence favors an intracratonic rift for the depositional setting of the Nsuze Group.« less

Using Stable Isotope Geochemistry to Determine Changing Paleohydrology and Diagenetic Alteration in the Late Cretaceous Kaiparowits Formation, UT USA

NASA Astrophysics Data System (ADS)

Yamamura, Daigo

The Western Interior Basin of the North America preserves one of the best sedimentary and paleontological records of the Cretaceous in the world. The Upper Cretaceous Kaiparowits Formation is a rapidly deposited fluvial sequence and preserves one of the most complete terrestrial fossil record of the North America. Such a unique deposit provides an opportunity to investigate the interaction between the physical environment and ecology. In an effort to decipher such interaction, stable isotope composition of cements in sedimentary rocks, concretions and vertebrate fossils were analyzed. Despite the difference in facies and sedimentary architecture, the isotope composition does not change significantly at 110 m from the base of the formation. Among the well-preserved cement samples, stable isotope composition indicates a significant hydrologic change within the informal Middle unit; a 6.37‰ depletion in delta13C and 3.30‰ enrichment in delta 18O occurs at 300 m above the base of the formation. The isotope values indicate that the sandstone cements below 300 m were precipitated in a mixing zone between marine and terrestrial groundwater, whereas the cements in upper units were precipitated in a terrestrial groundwater. Despite the difference in physical appearance (i.e. color and shape), the isotopic compositions of cements in concretions are similar to well-cemented sandstone bodies in similar stratigraphic positions. Isotope compositions of the host rock are similar to that of mudrock and weathered sandstone, suggesting the origin of cementing fluids for the sandstone and concretions were the same indicating that: 1) the concretions were formed in shallow groundwater and not related to the groundwater migration, or 2) all cements in upper Kaiparowits Formation are precipitated or altered during later stage groundwater migration. Average delta18Oc from each taxon show the same trend as the delta18Op stratigraphic change, suggesting delta18Oc is still useful as a paleoclimatic proxy. Compared to other Campanian formations, fossil delta18O p are depleted for their paleolatitude, suggesting the Kaiparowits Plateau had higher input from high-elevation runoff, consistent with other paleoclimatic studies. Estimated delta18Ow ranged between vadose influenced dry season values of -8.88‰ to high elevation runoff values of -13.76‰ suggesting dynamic hydrologic interactions.

Using Crater Counts to Constrain Erosion Rates on Mars: Implications for the Global Dust Cycle, Sedimentary Rock Erosion and Organic Matter Preservation

NASA Astrophysics Data System (ADS)

Mayer, D. P.; Kite, E. S.

2016-12-01

Sandblasting, aeolian infilling, and wind deflation all obliterate impact craters on Mars, complicating the use of crater counts for chronology, particularly on sedimentary rock surfaces. However, crater counts on sedimentary rocks can be exploited to constrain wind erosion rates. Relatively small, shallow craters are preferentially obliterated as a landscape undergoes erosion, so the size-frequency distribution of impact craters in a landscape undergoing steady exhumation will develop a shallower power-law slope than a simple production function. Estimating erosion rates is important for several reasons: (1) Wind erosion is a source of mass for the global dust cycle, so the global dust reservoir will disproportionately sample fast-eroding regions; (2) The pace and pattern of recent wind erosion is a sorely-needed constraint on models of the sculpting of Mars' sedimentary-rock mounds; (3) Near-surface complex organic matter on Mars is destroyed by radiation in <108 years, so high rates of surface exhumation are required for preservation of near-surface organic matter. We use crater counts from 18 HiRISE images over sedimentary rock deposits as the basis for estimating erosion rates. Each image was counted by ≥3 analysts and only features agreed on by ≥2 analysts were included in the erosion rate estimation. Erosion rates range from 0.1-0.2 {μ }m/yr across all images. These rates represent an upper limit on surface erosion by landscape lowering. At the conference we will discuss the within and between-image variability of erosion rates and their implications for recent geological processes on Mars.

Geology of the southern Elkhorn Mountains, Jefferson and Broadwater Counties, Montana

USGS Publications Warehouse

Klepper, M.R.; Weeks, R.A.; Ruppel, E.T.

1957-01-01

The geology of an area of about 270 square miles in the southern Elkhorn Mountains, west of Townsend in west-central Montana, is described. The mountains in the southern part of the area comprise northward-trending alternating ridges and valleys underlain principally by folded sedimentary rocks. They merge northward into the higher and more rugged main mass of the mountains, which is underlain principally by upper Cretaceous volcanic rocks. The mountaintops are 1,000 to 4,500 feet above the major valleys. The sedimentary rocks range in age from Precambrian to Tertiary and the igneous rocks from late Cretaceous to probably middle Tertiary. The oldest rocks are varicolored mudstone, shale, and sandstone of the Belt series of late Precambrian age. They are overlain with slight unconformity by a moderately thick but incomplete section of Paleozoic rocks. The basal Paleozoic formation is the Flathead quartzite of Middle Cambrian age, which is overlain by alternating units of shale and carbonate rock : the Wolsey shale, the Meagher limestone, the Park shale, the Pilgrim dolomite, and the Red Lion formation, all of Cambrian age. A slight erosional unconformity between the Red Lion formation and the Maywood formation of late Devonian age marks a long interval of crustal stability in the area. The Maywood is overlain by the Jefferson dolomite and the Three Forks shale of Late Devonian and Mississippian age, and these in turn are conformably overlain by the Lodgepole and Mission Canyon limestones, a thick carbonate sequence of Mississippian age. A slight erosional unconformity separates the Mission Canyon limestone from the Amsden formation, which probably includes beds of both Mississippian and Pennsylvanian age. The Amsden is composed of a heterogeneous assemblage of arenaceous, argillaceous, dolomitic, and calcareous rocks and grades upward into the Quadrant formation of Pennsylvanian age, an alternation of quartzitic sandstone and dolomite. At the top of the Paleozoic section is the Phosphoria formation of Permian age, a thin unit of chert and quartzitic sandstone that contains a few thin phosphate beds. The basal Mesozoic unit is the Swift formation of late Jurassic age, a thin calcareous marine sandstone that overlies the Phosphoria with slight erosional unconformity. It is overlain by nonmarine shale and sandstone of the Morrison formation of late Jurassic age and the Kootenai formation of Early Cretaceous age. The Kootenai is overlain, possibly with slight erosional unconformity, by the Colorado formation an assemblage of marine dark shale and siliceous mudstone and nonmarine quartz-chert sandstone. The Colorado formation as here used includes beds of both Early and Late Cretaceous age. The Colorado in places grades upwards into a sequence of feldspathic sandstone and tuff beds here named the Slim Sam formation. Elsewhere within the area, the Slim Sam formation is absent, probably in part owing to erosion and in part nondeposition. Where present, the Slim Sam grades upward into a thick sequence of andesitic and quartz latitic volcanic rocks, comprising tuffs, lapilli tuffs, breccias, welded tuffs and flows, that are here named the Elkhorn Mountains volclinics and are probably entirely of Cretaceous age. Where the Slim Sam formation is absent, the Elkhorn Mountains volcanics rest with angular unconformity on beds as old as the Morrison. The pre-Tertiary layered rocks, aggregating more than 15,000 feet in thickness, were folded and intruded by igneous rocks of several types, and the area was uplifted and eroded to a terrain of mature relief, similar to that of the present. During the Oligocene epoch, volcanic sediments with interbreds of nonvolcanic gravel accumulated. These beds were in turn moderately eroded, and gravel of Miocene ( ?) age was deposited in channels within them. Subsequently, probably during the Pliocene epoch, the Tertiary beds were weakly deformed locally, and a pediment was cut across the Tertiary and older rocks in the southern part of the area. Fan gravel, in part of Recent origin and in part older, blankets parts of the pediment. Glacial deposits of at least two stages of Pleistocene glaciation are present in the higher mountains in the northern part of the area. The intrusive igneous rocks, except for a few felsite dikes of uncertain age, are divisible into two groups, primarily on the basis of structural relations and secondarily on the basis of composition and fabric. The older group of dioritic and andesitic rocks were intruded in part, if not wholly, prior to the main folding and are similar in chemical and mineralogical composition to the Elkhorn Mountains volcanics. They were probably emplaced throughout the period of volcanism that commenced in late Niobrara time and continued until late Cretaceous time. The younger group consists chiefly of quartzbearing phanerites but includes rocks ranging from gabbro to alaskitic granite and aplite. These rocks were emplaced after the main episode of folding and faulting. The Boulder batholith, composed dominantly of quartz monzonite, is the principal body of this younger group. The older igneous rocks metamorphosed the invaded rocks only slightly. In contrast, the younger intrusive bodies, and especially the batholith, altered and recrystallized the country rock in moderately broad belts, changing them to various types of hornfels, calcsilicate rock, marble, and vitreous quartzite. Concomitantly magnetite, garnet, axinite, and other high-temperature replacement minerals formed locally as products of additive metamorphism. The pre-Tertiary layered rocks of the southern Elkhorn Mountains are folded into northward-trending folds and are cut by many faults. The sedimentary rocks tend to be more tightly folded than the Elkhorn Mountains volcanics, although both were involved in the major folding. The principal folds of the area from east to west are : a major dome, a complex syncline with several second-order folds, and a remnant of a northward-plunging anticline, the major part of which was engulfed by the batholith. The folded rocks are cut by many faults of small to moderate displacement and by two faults of large displacement. Most of the faults were probably formed by the same forces that produced the folds. The origin of the two major faults, however, is uncertain, and may be related to igneous activity. The batholith crosscuts the folded structure and is in turn cut by small faults. Some parts of the area were elevated along steep normal faults in late Tertiary time. The southern part of the Elkhorn Mountains has been mountainous at least since early Oligocene time, and probably began to take form during the Cretaceous. As a consequence of long continued erosion, the modern topography reflects the structure and lithologic character of the underlying rocks except in a few areas blanketed by poorly consolidated Tertiary rocks and in the higher mountains where glaciation has been prominent. Silver, lead, zinc, and gold have been produced, either singly or, more typically, as a combination of metals from a number of types of ore deposits. Replacement deposits in carbonate rocks are the most common type, but veins, contact metamorphic deposits, and pipelike bodies of breccia cemented by ore and gangue minerals also are present. The Elkhorn mining district has the largest number of mines and the greatest variety of types of deposits. In the Tizer Basin several narrow goldbearing veins cut andesitic volcanic rocks, and in the southern part of the area sporadic small veins and replacement deposits occur in carbonate rocks. The mines and prospects of the area are described, and some suggestions for future prospecting are outlined. The application of geochemical prospecting techniques may prove of value, judging from the results of reconnaissance soil sampling in the vicinity of the Elkhorn mine.

Age and origin of the Merrimack terrane, southeastern New England: A detrital zircon U-Pb geochronology study

NASA Astrophysics Data System (ADS)

Sorota, Kristin

Metasedimentary rocks of the Merrimack terrane (MT) originated as a thick cover sequence on Ganderia consisting of sandstones, calcareous sandstones, pelitic rocks and turbidites. In order to investigate the age, provenance and stratigraphic order of these rocks and correlations with adjoining terranes, detrital zircon suites from 7 formations across the MT along a NNE-trending transect from east-central Massachusetts to SE New Hampshire were analyzed by U-Pb LA-ICP-MS methods on 90-140 grains per sample. The youngest detrital zircons in the western units, the Worcester, Oakdale and Paxton Formations, are ca. 438 Ma while those in the Kittery, Eliot and Berwick Formations in the northeast are ca. 426 Ma. The Tower Hill Formation previously interpreted to form the easternmost unit of the MT in MA, has a distinctly different zircon distribution with its youngest zircon population in the Cambrian. All samples except for the Tower Hill Formation have detrital zircon age distributions with significant peaks in the mid-to late Ordovician, similar abundances of early Paleozoic and late Neoproterozoic zircons, significant input from ˜1.0 to ˜1.8 Ga sources and limited Archean grains. The similarities in zircon provenance suggest that all units across the terrane, except for the Tower Hill Formation, belong to a single sequence of rocks, with similar sources and with the units in the NE possibly being somewhat younger than those in east-central Massachusetts. The continuous zircon age distributions observed throughout the Mesoproterozoic and late Paleoproterozoic are consistent with an Amazonian source. All samples, except the Tower Hill Formation, show sedimentary input from both Ganderian and Laurentian sources and suggest that Laurentian input increases as the maximum depositional age decreases.

Mars sedimentary rock erosion rates constrained using crater counts, with applications to organic-matter preservation and to the global dust cycle

NASA Astrophysics Data System (ADS)

Kite, Edwin S.; Mayer, David P.

2017-04-01

Small-crater counts on Mars light-toned sedimentary rock are often inconsistent with any isochron; these data are usually plotted then ignored. We show (using an 18-HiRISE-image, > 104-crater dataset) that these non-isochron crater counts are often well-fit by a model where crater production is balanced by crater obliteration via steady exhumation. For these regions, we fit erosion rates. We infer that Mars light-toned sedimentary rocks typically erode at ∼102 nm/yr, when averaged over 10 km2 scales and 107-108 yr timescales. Crater-based erosion-rate determination is consistent with independent techniques, but can be applied to nearly all light-toned sedimentary rocks on Mars. Erosion is swift enough that radiolysis cannot destroy complex organic matter at some locations (e.g. paleolake deposits at SW Melas), but radiolysis is a severe problem at other locations (e.g. Oxia Planum). The data suggest that the relief of the Valles Marineris mounds is currently being reduced by wind erosion, and that dust production on Mars < 3 Gya greatly exceeds the modern reservoir of mobile dust.

Stratigraphy and Folding in the Cenozoic Cover of a Fold-Thrust Belt in the Nallıhan Region (Ankara, Central Turkey)

NASA Astrophysics Data System (ADS)

Karaaǧaç, Serdal; Koral, Hayrettin

2017-04-01

This study investigates stratigraphy and structural features in the Cenozoic sedimentary sequence of the fold-thrust belt of the Nallıhan-Ankara region, located to the north of the İzmir-Ankara-Erzincan Suture Zone. Permian-Triassic age marble intercalated with schist-phyllites, the upper Jurassic-lower Cretaceous age limestone and the upper Cretaceous age sandstone-shale alternation compose the basement in the study area. These rocks are unconformably overlain by the Cenozoic age terrestrial sedimentary and volcanic units. The Cenozoic stratigraphy begins with the Paleocene-Eocene age coal-bearing, at times, volcanic intercalated conglomerate-sandstone-mudstone alternation of alluvial-fluvial origins (Aksaklar Formation) and the tuff intercalated with lacustrine limestone, bituminous limestone (Kabalar Formation). These units are conformably overlain by the Eocene age basalt-andesite and pyroclastic rocks (Meyildere volcanics). The Paleocene-Eocene aged units are unconformably overlain by the conglomerate-sandstone-mudstone-marl of a lower-middle Miocene lacustrine environment (Hançili Formation). The terrestrial conglomerate-sandstone alternation (Örencik Formation) is the youngest unit in the Cenozoic stratigraphy, and is assumed to be of Pliocene age based its stratigraphic position on older units. Field study shows existence of both folds and faults in the sedimentary cover. Stereographic projections of bedding measured in the field shows N25W/45NW and N60W/4SE-oriented fold axes in the Paleocene-Eocene age units. There are also N76W/12SE and N88E/8NE-oriented folds. The difference in fold-axis orientations suggests that some folds may have been rotated in blocks bound by faults during the post-Paleocene/Eocene period. Whereas, the lower-middle Miocene units manifest N88W/13SE-oriented fold axes. It is thus proposed that the observed difference in the azimuth of fold axes represent two different folding phases, one with NE-SW and the other with N-S directed axis of compression. Open folds with E-W orientation seem to be structural elements developed during the last phase of the deformation.

A review of the sedimentology of the Early Proterozoic Pretoria Group, Transvaal Sequence, South Africa: implications for tectonic setting

NASA Astrophysics Data System (ADS)

Eriksson, P. G.; Schreiber, U. M.; van der Neut, M.

The sedimentary rocks of the Early Proterozoic Pretoria Group form the floor rocks to teh 2050 M.a. Bushveld Complex. An overall alluvial fan-fan-delta - lacustrine palaeoenvironmental model is postulated for the Pretoria Group. This model is compatible with a continental half-graben tectonic setting, with steep footwall scarps on the southern margin and a lower gradient hanging wall developed to the north. The latter provided much of the basin-fill detritus. It is envisaged that the southern boundary fault system migrated southwards by footwall collapse as sedimentation continued. Synsedimentary mechanical rifting, associated with alluvial and deltaic sedimentation (Rooihoogte-Strubenkop Formations) was followed by thermal subsidence, with concomitant transgressive lacustrine deposition (Daspoort-Magaliesberg Formations). The proposed half-graben basin was probably related to the long-lived Thabazimbi-Murchison and Sugarbush-Barberton lineaments, which bound the preserved outcrops of the Pretoria Group.

Sedimentary Processes on Earth, Mars, Titan, and Venus

NASA Astrophysics Data System (ADS)

Grotzinger, J. P.; Hayes, A. G.; Lamb, M. P.; McLennan, S. M.

The production, transport and deposition of sediment occur to varying degrees on Earth, Mars, Venus, and Titan. These sedimentary processes are significantly influenced by climate that affects production of sediment in source regions (weathering), and the mode by which that sediment is transported (wind vs. water). Other, more geological, factors determine where sediments are deposited (topography and tectonics). Fluvial and marine processes dominate Earth both today and in its geologic past, aeolian processes dominate modern Mars although in its past fluvial processes also were important, Venus knows only aeolian processes, and Titan shows evidence of both fluvial and aeolian processes. Earth and Mars also feature vast deposits of sedimentary rocks, spanning billions of years of planetary history. These ancient rocks preserve the long-term record of the evolution of surface environments, including variations in climate state. On Mars, sedimentary rocks record the transition from wetter, neutral-pH weathering, to brine-dominated low-pH weathering, to its dry current state.

Development of magnetic and elastic anisotropies in slates during progressive deformation

NASA Astrophysics Data System (ADS)

Hrouda, František; Pros, Zdeněk; Wohlgemuth, Jiří

1993-05-01

Magnetic and elastic anisotropies were investigated in rocks of the Nízký Jeseník Mountains (northeast Bohemian Massif) ranging in lithology from almost unmetamorphosed sediments, through slate, to phyllite, and showing a range of structural styles from sedimentary, through spaced and slaty cleavage, to metamorphic schistosity. In unmetamorphosed and undeformed sedimentary rocks, both the anisotropies display close relationships to the sedimentary fabric. During the development of the spaced and slaty cleavage they are gradually re-oriented into the attitudes of the deformational fabrics, and in the rocks with metamorphic schistosity they are fully related to the deformational fabric elements, which can be oriented in a very different way from the original sedimentary structures. The magnetic anisotropy is mostly due to the preferred orientation of phyllosilicates generated during very weak regional metamorphism, and subordinately due to the preferred orientation of magnetite. The elastic anisotropy is probably controlled by the preferred orientation of phyllosilicates and by the existence of oriented systems of microcracks.

Utilizing borehole electrical images to interpret lithofacies of fan-delta: A case study of Lower Triassic Baikouquan Formation in Mahu Depression, Junggar Basin, China

NASA Astrophysics Data System (ADS)

Yuan, Rui; Zhang, Changmin; Tang, Yong; Qu, Jianhua; Guo, Xudong; Sun, Yuqiu; Zhu, Rui; Zhou, Yuanquan (Nancy)

2017-11-01

Large-scale conglomerate fan-delta aprons were typical deposits on the slope of Mahu Depression during the Early Triassic. Without outcrops, it is difficult to study the lithofacies only by examining the limited cores from the main oil-bearing interval of the Baikouquan Formation. Borehole electrical imaging log provides abundant high-resolution geologic information that is obtainable only from real rocks previously. Referring to the lithology and sedimentary structure of cores, a case study of fan-deltas in the Lower Triassic Baikouquan Formation of the Mahu Depression presents a methodology for interpreting the complicated lithofacies utilizing borehole electrical images. Eleven types of lithologies and five types of sedimentary structures are summarized in borehole electrical images. The sediments are fining upward from gravel to silt and clay in the Baikouquan Formation. Fine-pebbles and granules are the main deposits in T1b1 and T1b2, but sandstones, siltstones and mudstones are more developed in T1b3. The main sedimentary textures are massive beddings, cross beddings and scour-and-fill structures. Parallel and horizontal beddings are more developed in T1b3 relatively. On integrated analysis of the lithology and sedimentary structure, eight lithofacies from electrical images, referred to as image lithofacies, is established for the fan-deltas. Granules to coarse-pebbles within massive beddings, granules to coarse-pebbles within cross and parallel beddings, siltstones within horizontal and massive beddings are the most developed lithofacies respectively in T1b1, T1b2 and T1b3. It indicates a gradual rise of the lake level of Mahu depression during the Early Triassic, with the fan-delta aprons retrograding towards to the margin of the basin. Therefore, the borehole electrical imaging log compensate for the limitation of cores of the Baikouquan Formation, providing an effective new approach to interpret the lithofacies of fan-delta.

Provenance and sedimentary environments of the Proterozoic São Roque Group, SE-Brazil: Contributions from petrography, geochemistry and Sm-Nd isotopic systematics of metasedimentary rocks

NASA Astrophysics Data System (ADS)

Henrique-Pinto, R.; Janasi, V. A.; Tassinari, C. C. G.; Carvalho, B. B.; Cioffi, C. R.; Stríkis, N. M.

2015-11-01

The Proterozoic metasedimentary sequences exposed in the São Roque Domain (Apiaí Terrane, Ribeira Belt, southeast Brazil) consist of metasandstones and meta-felspathic wackes with some volcanic layers of within-plate geochemical signature (Boturuna Formation), a passive margin turbidite sequence of metawackes and metamudstones (Piragibu Formation), and volcano-sedimentary sequences with MORB-like basalts (Serra do Itaberaba Group; Pirapora do Bom Jesus Formation). A combination of zircon provenance studies in metasandstones, whole-rock geochemistry and Sm-Nd isotopic systematics in metamudstones was used to understand the provenance and tectonic significance of these sequences, and their implications to the evolution of the Precambrian crust in the region. Whole-rock geochemistry of metamudstones, dominantly from the Piragibu Formation, points to largely granitic sources (as indicated for instance by LREE-rich moderately fractionated REE patterns and subtle negative Eu anomalies) with some mafic contribution (responding for higher contents of Fe2O3, MgO, V, and Cr) and were subject to moderate weathering (CIA - 51 to 85). Sm-Nd isotope data show three main peaks of Nd TDM ages at ca. 1.9, 2.1 and 2.4 Ga; the younger ages define an upper limit for the deposition of the unit, and reflect greater contributions from sources younger than the >2.1 Ga basement. The coincident age peaks of Nd TDM and U-Pb detrital zircons at 2.1-2.2 Ga and 2.4-2.5 Ga, combined with the possible presence of a small amount of zircons derived from mafic (gabbroid) sources with the same ages, as indicated by a parallel LA-ICPMS U-Pb dating study in metapsammites, are suggestive that these were major periods of crustal growth in the sources involving not only crust recycling but also some juvenile addition. A derivation from similar older Proterozoic sources deposited in a passive margin basin is consistent with the main sedimentary sequences in the São Roque Domain being broadly coeval and in part laterally continuous. The coincident age, Sm-Nd isotope signature and geographic proximity make the exposures of basement orthogneisses in the Apiaí Terrane candidates for source material to the São Roque Domain. Additional sources with younger Nd TDM could be juvenile 2.2 Ga basement from the southern portion of the São Francisco Craton and its marginal belts (e.g., Mineiro Belt and Juiz de Fora Complex).

A study of uranium favorability of Cenozoic sedimentary rocks, Basin and Range Province, Arizona: Part I, General geology and chronology of pre-late Miocene Cenozoic sedimentary rocks

USGS Publications Warehouse

Scarborough, Robert Bryan; Wilt, Jan Carol

1979-01-01

This study focuses attention on Cenozoic sedimentary rocks in the Basin and Range Province of Arizona. The known occurrences of uranium and anomalous radioactivity in these rocks are associated with sediments that accumulated in a low energy environment characterized by fine-grained clastics, including important tuffaceous materials, and carbonate rocks. Most uranium occurrences, in these rocks appear to be stratabound. Emphasis was placed on those sedimentary materials that pre-date the late Cenozoic Basin and Range disturbance. They are deformed and crop out on pedimented range blocks and along the province interface with the Transition Zone. Three tentative age groups are recognized: Group I - Oligocene, pre-22 m.y., Group II - early Miocene - 22 m.y. - 16 m.y., and Group III - middle Miocene - 16 m.y. to 13--10 m.y. Regionally, these three groups contain both coarse to fine-grained red clastics and low energy lighter colored 'lacustrine' phases. Each of the three groups has been the object of uranium exploration. Group II, the early Miocene strata, embraces the Anderson Mine - Artillery region host rocks and also the New River - Cave Creek early Miocene beds-along the boundary with the Transition Zone. These three groups of rocks have been tectonically deformed to the extent that original basins of deposition cannot yet be reconstructed. However, they were considerably more extensive in size than the late Cenozoic basins the origin of which deformed the former. Group II rocks are judged to be of prime interest because of: (1) the development and preservation of organic matter in varying lithologies, (2) apparent contemporaneity with silicic volcanic centers, (3) influence of Precambrian crystalline rocks, and (4) relative outcrop continuity near the stable Transition Zone. The Transition Zone, especially along its boundary with the Basin and Range Province, needs additional geologic investigation, especially as regards the depositional continuity of Group II sediment s.

Petrography and stratigraphy of productive beds in the Morgan Formation, Church Buttes Unit No. 19, southwest Wyoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Picard, M.D.

1977-01-01

The combination stratigraphic and structural traps in the Morgan Formation of Pennsylvanian age of Church Buttes, Butcher Knife, and Bruff that produce gas and condensate are directly related to folding of the Church Buttes Arch in SW. Wyoming and NE. Utah. Present knowledge indicates that the Morgan gas and condensate originated in source beds in the lower Morgan formation west of the present Church Buttes Arch and were trapped mainly in porous barrier deposits in the Morgan. Folding of the Church Buttes Arch liberated these accumulations and they migrated updip in their present traps. This work summarizes the sedimentary petrographymore » of the productive beds in the Morgan Formation at the Church Buttes Unit No. 19 (SEC. 8, T 16 N, R 112 W), Uinta County, Wyoming. The stratigraphy is outlined for the whole region and the productive interval at Church Buttes is correlated with other rock units. Nearly all of the rocks studied are dolomite, which is difficult to interpret because of pronounced diagenesis. 33 references.« less

Geology and mineral resources of the Mud Springs Ranch Quadrangle, Sweetwater County, Wyoming

USGS Publications Warehouse

Roehler, Henry W.

1979-01-01

The Mud Springs Ranch quadrangle occupies an area of 56 mF (square miles) on the southeast flank of the Rock Springs uplift in southwestern Wyoming. The climate is arid and windy. The landscape is mostly poorly vegetated and consists of north-trending ridges and valleys that are dissected by dry drainages. Sedimentary rocks exposed in the quadrangle are 5,400 ft (feet) thick and are mostly gray sandstone, siltstone, and shale, gray and brown carbonaceous shale, and thin beds of coal. They compose the Blair, Rock Springs, Ericson, Almond, and Lewis Formations of Cretaceous age and the Fort Union Formation of Paleocene age. The structure is mostly homoclinal, having southeast dips of 5?-12? in the northern part of the quadrangle, but minor plunging folds and one small fault are present in the southern part of the quadrangle. Three coal beds in the Fort Union Formation and 15 coal beds in the Almond Formation exceed 2.5 ft in thickness, are under less than 3,000 ft of overburden, and are potentially minable. Geographic stratigraphic, and resource data are present for each bed of minable coal. The total minable coal resources are estimated to be about 283 million short tons. Nine coal and rock samples from outcrops were analyzed to determine their quality and chemical composition. Four dry oil and gas test wells have been drilled within the quadrangle area, but structurally controlled stratigraphic-trap prospects remain untested.

PROBLEMS AND METHODOLOGY OF THE PETROLOGIC ANALYSIS OF COAL FACIES.

USGS Publications Warehouse

Chao, Edward C.T.

1983-01-01

This condensed synthesis gives a broad outline of the methodology of coal facies analysis, procedures for constructing sedimentation and geochemical formation curves, and micro- and macrostratigraphic analysis. The hypothetical coal bed profile has a 3-fold cycle of material characteristics. Based on studies of other similar profiles of the same coal bed, and on field studies of the sedimentary rock types and their facies interpretation, one can assume that the 3-fold subdivision is of regional significance.

Analysis of ERTS-1 imagery of Wyoming and its application to evaluation of Wyoming's natural resources

NASA Technical Reports Server (NTRS)

Houston, R. S. (Principal Investigator); Marrs, R. W.

1972-01-01

The author has identified the following significant results. The major effort has been toward interpretation of the intermediate and high altitude aircraft data which was available. Project investigators were able to delineate various structures and lithologic units in well-exposed sedimentary sequences and in regions of Precambrian igneous and metamorphic rocks. In one area, the Precambrian lithologies, which were previously unmapped, include a taconite formation which might be economically important.

Prediction of carbonate rock type from NMR responses using data mining techniques

NASA Astrophysics Data System (ADS)

Gonçalves, Eduardo Corrêa; da Silva, Pablo Nascimento; Silveira, Carla Semiramis; Carneiro, Giovanna; Domingues, Ana Beatriz; Moss, Adam; Pritchard, Tim; Plastino, Alexandre; Azeredo, Rodrigo Bagueira de Vasconcellos

2017-05-01

Recent studies have indicated that the accurate identification of carbonate rock types in a reservoir can be employed as a preliminary step to enhance the effectiveness of petrophysical property modeling. Furthermore, rock typing activity has been shown to be of key importance in several steps of formation evaluation, such as the study of sedimentary series, reservoir zonation and well-to-well correlation. In this paper, a methodology based exclusively on the analysis of 1H-NMR (Nuclear Magnetic Resonance) relaxation responses - using data mining algorithms - is evaluated to perform the automatic classification of carbonate samples according to their rock type. We analyze the effectiveness of six different classification algorithms (k-NN, Naïve Bayes, C4.5, Random Forest, SMO and Multilayer Perceptron) and two data preprocessing strategies (discretization and feature selection). The dataset used in this evaluation is formed by 78 1H-NMR T2 distributions of fully brine-saturated rock samples from six different rock type classes. The experiments reveal that the combination of preprocessing strategies with classification algorithms is able to achieve a prediction accuracy of 97.4%.

Unroofing history of Late Paleozoic magmatic arcs within the ``Turan Plate'' (Tuarkyr, Turkmenistan)

NASA Astrophysics Data System (ADS)

Garzanti, E.; Gaetani, M.

2002-07-01

Stratigraphic, sedimentologic and petrographic data collected on the Kizilkaya sedimentary succession (Western Turkmenistan) demonstrate that the "Turan Plate" consists in fact of an amalgamation of Late Paleozoic to Triassic continental microblocks separated by ocean sutures. In the Kizilkaya area, an ophiolitic sequence including pyroxenite, gabbro, pillow basalt and chert, interpreted as the oceanic crust of a back-arc or intra-arc basin, is tectonically juxtaposed against volcaniclastic redbeds documenting penecontemporaneous felsic arc magmatism (Amanbulak Group). A collisional event took place around ?mid-Carboniferous times, when oceanic rocks underwent greenschist-facies metamorphism and a thick volcaniclastic wedge, with pyroclastic rocks interbedded in the lower part, accumulated (Kizilkaya Formation). The climax of orogenic activity is testified by arid fanglomerates shed from the rapid unroofing of a continental arc sequence, including Middle-Upper Devonian back-reef carbonates and cherts, and the underlying metamorphic and granitoid basement rocks (Yashmu Formation). After a short period of relative quiescence, renewed tectonic activity is indicated by a conglomeratic sequence documenting erosion of a sedimentary and metasedimentary succession including chert, sandstone, slate and a few carbonates. A final stage of rhyolitic magmatism took place during rapid unroofing of granitoid basement rocks (Kizildag Formation). Such a complex sequence of events recorded by the Kizilkaya episutural basin succession documents the stepwise assemblage of magmatic arcs and continental fragments to form the Turan microblock collage during the Late Paleozoic. Evolution of detrital modes is compatible with that predicted for juvenile to accreted and unroofed crustal blocks. The deposition of braidplain lithic arkoses in earliest Triassic time indicates that strong subsidence continued after the end of the volcanic activity, possibly in retroarc foreland basin settings. The occurrence of transgressive coquinas yielding endemic ammonoids ( Dorikranites) characteristic of the whole Caspian area suggests proximity to the southern margin of the newly formed Eurasian continent in the late Early Triassic. The Late Triassic Eo-Cimmerian Orogeny caused only mild tilting and rejuvenation of the underlying succession in the study area. Only at this time were the Turan blocks, a series of Indonesian-type terranes comprised between the Mashad Paleo-Tethys Suture in the south and the Mangyshlak belt in the north, finally incorporated into the Eurasian landmass.

Lithogeochemical character of near-surface bedrock in the New England coastal basins

USGS Publications Warehouse

Robinson, Gilpin R.; Ayotte, Joseph D.; Montgomery, Denise L.; DeSimone, Leslie A.

2002-01-01

This geographic information system (GIS) data layer shows the generalized lithologic and geochemical, termed lithogeochemical, character of near-surface bedrock in the New England Coastal Basin (NECB) study area of the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program. The area encompasses 23,000 square miles in western and central Maine, eastern Massachusetts, most of Rhode Island, eastern New Hampshire and a small part of eastern Connecticut. The NECB study area includes the Kennebec, Androscoggin, Saco, Merrimack, Charles, and Blackstone River Basins, as well as all of Cape Cod. Bedrock units in the NECB study area are classified into lithogeochemical units based on the relative reactivity of their constituent minerals to dissolution and the presence of carbonate or sulfide minerals. The 38 lithogeochemical units are generalized into 7 major groups: (1) carbonate-bearing metasedimentary rocks; (2) primarily noncalcareous, clastic sedimentary rocks with restricted deposition in discrete fault-bounded sedimentary basins of Mississipian or younger age; (3) primarily noncalcareous, clastic sedimentary rocks at or above biotite-grade of regional metamorphism; (4) mafic igneous rocks and their metamorphic equivalents; (5) ultramafic rocks; (6) felsic igneous rocks and their metamorphic equivalents; and (7) unconsolidated and poorly consolidated sediments.

Mercury isotope constraints on the source for sediment-hosted lead-zinc deposits in the Changdu area, southwestern China

NASA Astrophysics Data System (ADS)

Xu, Chunxia; Yin, Runsheng; Peng, Jiantang; Hurley, James P.; Lepak, Ryan F.; Gao, Jianfeng; Feng, Xinbin; Hu, Ruizhong; Bi, Xianwu

2018-03-01

The Lanuoma and Cuona sediment-hosted Pb-Zn deposits hosted by Upper Triassic limestone and sandstone, respectively, are located in the Changdu area, SW China. Mercury concentrations and Hg isotopic compositions from sulfide minerals and potential source rocks (e.g., the host sedimentary rocks and the metamorphic basement) were investigated to constrain metal sources and mineralization processes. In both deposits, sulfide minerals have higher mercury (Hg) concentrations (0.35 to 1185 ppm) than the metamorphic basement rocks (0.05 to 0.15 ppm) and sedimentary rocks (0.02 to 0.08 ppm). Large variations of mass-dependent fractionation (3.3‰ in δ202Hg) and mass-independent fractionation (0.3‰ in Δ199Hg) of Hg isotopes were observed. Sulfide minerals have Hg isotope signatures that are similar to the hydrothermal altered rocks around the deposit, and similar to the metamorphic basement, but different from barren sedimentary rocks. The variation of Δ199Hg suggests that Hg in sulfides was mainly derived from the underlying metamorphic basement. Mercury isotopes could be a geochemical tracer in understanding metal sources in hydrothermal ore deposits.

A Martian analog in Kansas: Comparing Martian strata with Permian acid saline lake deposits

NASA Astrophysics Data System (ADS)

Benison, Kathleen C.

2006-05-01

An important result of the Mars Exploration Rover's (MER) mission has been the images of sedimentary structures and diagenetic features in the Burns Formation at Meridiani Planum. Bedding, cross-bedding, ripple marks, mud cracks, displacive evaporite crystal molds, and hematite concretions are contained in these Martian strata. Together, these features are evidence of past saline groundwater and ephemeral shallow surface waters on Mars. Geochemical analyses of these Martian outcrops have established the presence of sulfates, iron oxides, and jarosite, which strongly suggests that these waters were also acidic. The same assemblage of sedimentary structures and diagenetic features is found in the salt-bearing terrestrial red sandstones and shales of the middle Permian (ca. 270 Ma) Nippewalla Group of Kansas, which were deposited in and around acid saline ephemeral lakes. These striking sedimentological and mineralogical similarities make these Permian red beds and evaporites the best-known terrestrial analog for the Martian sedimentary rocks at Meridiani Planum.

Age of Walden Creek Group: Can it be demonstrated--Biostratigraphically

DOE Office of Scientific and Technical Information (OSTI.GOV)

Broadhead, T.W.; Hatcher, R.D. Jr.; Walker, K.R.

The Walden Creek Group (WCG) is a lithologically heterogeneous succession of sedimentary rocks exposed in the western Blue Ridge of the southern Appalachians. Carbonate rocks of the WCG occur as bedded limestone in the Sandsuck Formation and subjacent Wilhite and as limestone clasts in polymict conglomerate bodies within the Sandsuck, Wilhite, and the underlying Shields Formation. Petrographically, these carbonate rocks exhibit a shallow marine aspect. Locally abundant pisoids, ooids and peloids occur in a preservational continuum ranging from well-preserved internal fabrics to relict spar-filled micrite envelopes. Pisoids, occurring in grainstone and wackestone fabrics, resemble oversized marine ooids characteristic of Uppermore » Proterozoic carbonated rocks of Greenland and Spitzbergen. Recent reports of metazoan and foraminiferal fossils from the Wilhite Formation have cast doubt on its long-regarded Late Proterozoic age. The fossils the authors have observed include algal oncolites, minute fecal pellets, and extremely rare cyanobacterial filament sheaths and skeletal fragments of uncertain biological affinity. Good quality preservation of allochems in WCG carbonate rocks is important in evaluating the absence of undoubted Paleozoic fossils. Dominant components of Paleozoic biotas: crinoids, brachiopods, and bryozoans would be recognizable, even as tiny fragments. The absence of conodonts further suggests that carbonate rocks of the WCG predate the appearance of abundant skeletonized biota and are probably Late Proterozoic. The authors propose that both bedded carbonate rocks and carbonate clasts of the WCG are essentially contemporaneous with each other and reflect carbonate bank conditions that developed toward the end of Late Proterozoic clastic deposition, which filled rift basins that formed along the southeastern Laurentian margin. Episodic reactivation accounts for the occurrence of carbonate clasts in several parts of the WCG and Snowbird Group.« less

Volcanic settings and their reservoir potential: An outcrop analog study on the Miocene Tepoztlán Formation, Central Mexico

NASA Astrophysics Data System (ADS)

Lenhardt, Nils; Götz, Annette E.

2011-07-01

The reservoir potential of volcanic and associated sedimentary rocks is less documented in regard to groundwater resources, and oil and gas storage compared to siliciclastic and carbonate systems. Outcrop analog studies within a volcanic setting enable to identify spatio-temporal architectural elements and geometric features of different rock units and their petrophysical properties such as porosity and permeability, which are important information for reservoir characterization. Despite the wide distribution of volcanic rocks in Mexico, their reservoir potential has been little studied in the past. In the Valley of Mexico, situated 4000 m above the Neogene volcanic rocks, groundwater is a matter of major importance as more than 20 million people and 42% of the industrial capacity of the Mexican nation depend on it for most of their water supply. Here, we present porosity and permeability data of 108 rock samples representing five different lithofacies types of the Miocene Tepoztlán Formation. This 800 m thick formation mainly consists of pyroclastic rocks, mass flow and fluvial deposits and is part of the southern Transmexican Volcanic Belt, cropping out south of the Valley of Mexico and within the two states of Morelos and Mexico State. Porosities range from 1.4% to 56.7%; average porosity is 24.8%. Generally, permeabilities are low to median (0.2-933.3 mD) with an average permeability of 88.5 mD. The lavas are characterized by the highest porosity values followed by tuffs, conglomerates, sandstones and tuffaceous breccias. On the contrary, the highest permeabilities can be found in the conglomerates, followed by tuffs, tuffaceous breccias, sandstones and lavas. The knowledge of these petrophysical rock properties provides important information on the reservoir potential of volcanic settings to be integrated to 3D subsurface models.

Availability and quality of ground water in the Piedmont Province of Virginia

USGS Publications Warehouse

Powell, John Duane; Abe, Joseph M.

1985-01-01

The Piedmont Province of Virginia has an ample supply of groundwater, (perhaps as much as 1.5 billion gallons are in storage per sq mi) generally suitable for domestic and small supply needs. The source of this groundwater is precipitation, which is stored in the pore spaces of the regolith and in fractures in the underlying bedrock of crystalline rocks. Water within the sedimentary rocks of the sedimentary basins is stored in bedding planes, fractures, and in pore spaces in the rock, and in the regolith. Well yields can be minimized in both terrains by constructing wells along lineaments and in valleys. Groundwater in the crystalline rock is generally slightly mineralized and acidic (pH is greater than 7.0). Dissolved solids concentration in deep wells ( < 500 ft) in sedimentary rock may exceed tolerable limits. Land disposal of solid wastes and sewage for domestic septic systems present the major threat to groundwater quality. A greater understanding of the groundwater system in the Virginia Piedmont could be used to anticipate future shortages so that preventive measures could be implemented to protect the groundwater reservoir. (Author 's abstract)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hagstrum, J.T.

Paleomagnetic data are presented for a 50-m-thick sequence of Oxfordian to Tithonian sedimentary rocks conformably overlying Upper Jurassic pillow basalt within the Coast Range ophiolite at Stanley Mountain, California. These new data are similar in direction and polarity to previously published paleomagnetic data for the pillow basalt. The Jurassic sedimentary rocks were deposited during a mixed-polarity interval of the geomagnetic field, and uniformity of the remanent magnetization within the entire section of pillow basalt and sedimentary rocks indicates later remagnetization. Remagnetization of the Coast Range ophiolite is interpreted to have occurred during accretion to the continental margin, possibly by burialmore » and low-temperature alteration related to this event. Similar paleolatitudes calculated for the ophiolite (11{degree} {plus minus} 3{degree}) and for mid-Cretaceous sedimentary rocks of the Stanley Mountain terrane at Figueroa Mountain (6{degree} {plus minus} 5{degree}) are consistent with remagnetization of the ophiolite in southern California and elsewhere along the Pacific coast imply that these rocks were also overprinted, and their magnetic inclinations suggest remagnetization at low paleolatitudes as well. The Coast Range ophiolite at Stanley Mountain is thus inferred to have been remagnetized along the North American margin near 10{degree}N paleolatitude between earliest and mid-Cretaceous time and subsequently transported northward by strike-slip faulting related to relative motions between the Farallon, Kula, Pacific, and North American plates.« less

Mapping rock forming minerals at Boundary Canyon, Death Valey National Park, California, using aerial SEBASS thermal infrared hyperspectral image data

NASA Astrophysics Data System (ADS)

Aslett, Zan; Taranik, James V.; Riley, Dean N.

2018-02-01

Aerial spatially enhanced broadband array spectrograph system (SEBASS) long-wave infrared (LWIR) hyperspectral image data were used to map the distribution of rock-forming minerals indicative of sedimentary and meta-sedimentary lithologies around Boundary Canyon, Death Valley, California, USA. Collection of data over the Boundary Canyon detachment fault (BCDF) facilitated measurement of numerous lithologies representing a contact between the relatively unmetamorphosed Grapevine Mountains allochthon and the metamorphosed core complex of the Funeral Mountains autochthon. These included quartz-rich sandstone, quartzite, conglomerate, and alluvium; muscovite-rich schist, siltstone, and slate; and carbonate-rich dolomite, limestone, and marble, ranging in age from late Precambrian to Quaternary. Hyperspectral data were reduced in dimensionality and processed to statistically identify and map unique emissivity spectra endmembers. Some minerals (e.g., quartz and muscovite) dominate multiple lithologies, resulting in a limited ability to differentiate them. Abrupt variations in image data emissivity amongst pelitic schists corresponded to amphibolite; these rocks represent gradation from greenschist- to amphibolite-metamorphic facies lithologies. Although the full potential of LWIR hyperspectral image data may not be fully utilized within this study area due to lack of measurable spectral distinction between rocks of similar bulk mineralogy, the high spectral resolution of the image data was useful in characterizing silicate- and carbonate-based sedimentary and meta-sedimentary rocks in proximity to fault contacts, as well as for interpreting some mineral mixtures.

Melt in the impact breccias from the Eyreville drill cores, Chesapeake Bay impact structure, USA

NASA Astrophysics Data System (ADS)

Bartosova, Katerina; Hecht, Lutz; Koeberl, Christian; Libowitzky, Eugen; Reimold, Wolf Uwe

2011-03-01

The center of the 35.3 Ma Chesapeake Bay impact structure (85 km diameter) was drilled during 2005/2006 in an ICDP-0USGS drilling project. The Eyreville drill cores include polymict impact breccias and associated rocks (1397-01551 m depth). Tens of melt particles from these impactites were studied by optical and electron microscopy, electron microprobe, and microRaman spectroscopy, and classified into six groups: m1—clear or brownish melt, m2—brownish melt altered to phyllosilicates, m3—colorless silica melt, m4—melt with pyroxene and plagioclase crystallites, m5—dark brown melt, and m6—melt with globular texture. These melt types have partly overlapping major element abundances, and large compositional variations due to the presence of schlieren, poorly mixed melt phases, partly digested clasts, and variable crystallization and alteration. The different melt types also vary in their abundance with depth in the drill core. Based on the chemical data, mixing calculations were performed to determine possible precursors of these melt particles. The calculations suggest that most melt types formed mainly from the thick sedimentary section of the target sequence (mainly the Potomac Formation), but an additional crystalline basement (schist/gneiss) precursor is likely for the most abundant melt types m2 and m5. Sedimentary rocks with compositions similar to those of the melt particles are present among the Eyreville core samples. Therefore, sedimentary target rocks were the main precursor of the Eyreville melt particles. However, the composition of the melt particles is not only the result of the precursor composition but also the result of changes during melting and solidification, as well as postimpact alteration, which must also be considered. The variability of the melt particle compositions reflects the variety of target rocks and indicates that there was no uniform melt source. Original heterogeneities, resulting from melting of different target rocks, may be preserved in impactites of some large impact structures that formed in volatile-rich targets, because no large melt body exists, in which homogenization would have taken place.

Constraining the Texture and Composition of Pore-Filling Cements at Gale Crater, Mars

NASA Technical Reports Server (NTRS)

Siebach, K. L.; Grotzinger, J. P.; McLennan, S. M.; Hurowitz, J. A.; Ming, D. W.; Vaniman, D. T.; Rampe, E. B.; Blaney, D. L.; Kah, L. C.

2015-01-01

The Mars Science Laboratory (MSL) rover Curiosity has encountered a wide variety of sedimentary rocks deposited in fluvio-lacuestrine sequences at the base of Gale Crater. The presence of sedimentary rocks requires that initial sediments underwent diagenesis and were lithified. Lithification involves sediment compaction, cementation, and re-crystallization (or authigenic) processes. Analysis of the texture and composition of the cement can reveal the environmental conditions when the cements were deposited, enabling better understanding of early environments present within Gale Crater. The first step in lithification is sediment compaction. The Gale crater sediments do not show evidence for extensive compaction prior to cementation; the Sheepbed mudstone in Yellowknife Bay (YKB) has preserved void spaces ("hollow nodules"), indicating that sediments were cemented around the hollow prior to compaction, and conglomerates show imbrication, indicating minimal grain reorganization prior to lithification. Furthermore, assuming the maximum burial depth of these sediments is equivalent to the depth of Gale Crater, the sediments were never under more than 1 kb of pressure, and assuming a 15 C/km thermal gradient in the late Noachian, the maximum temperature of diagenesis would have been approximately 75 C. This is comparable to shallow burial diagenetic conditions on Earth. The cementation and recrystallization components of lithification are closely intertwined. Cementation describes the precipitation of minerals between grains from pore fluids, and recrystallization (or authigenesis) is when the original sedimentary mineral grains are altered into secondary minerals. The presence of authigenic smectites and magnetite in the YKB formation suggests that some recrystallization has taken place. The relatively high percentage of XRD-amorphous material (25-40%) detected by CheMin suggests that this recrystallization may be limited in scope, and therefore may not contribute significantly to the cementing material. However, relatively persistent amorphous components could exist in the Martian environment (e.g. amorphous MgSO4), so recrystallization, including loss of crystallinity, cannot yet be excluded as a method of cementation. In order to describe the rock cementation, both the rock textures and their composition must be considered. Here, we attempt to summarize the current understanding of the textural and compositional aspects of the cement across the rocks analyzed by Curiosity to this point.

Evolution of a Permo-Triassic sedimentary melange, Grindstone terrane, east-central Oregon

USGS Publications Warehouse

Blome, C.D.; Nestell, M.K.

1991-01-01

Perceives the Grindstone rocks to be a sedimentary melange composed of Paleozoic limestone slide and slump blocks that became detached from a carbonate shelf fringing a volcanic knoll or edifice in Late Permian to Middle Triassic time and were intermixed with Permian and Triassic slope to basinal clastic and volcaniclastic rocks in a forearc basin setting. Paleogeographic affinities of the Grindstone limestone faunas and volcaniclastic debris in the limestone and clastic rocks all indicate deposition in promixity to an island-arc system near the North American craton. -from Authors

Geology of the Powder River Basin, Wyoming and Montana, with reference to subsurface disposal of radioactive wastes

USGS Publications Warehouse

Beikman, Helen M.

1962-01-01

The Powder River Basin is a structural and topographic basin occupying an area of about 20,000 square miles in northeastern Wyoming arid southeastern Montana. The Basin is about 230 miles long in a northwest-southeast direction and is about 100 miles wide. It is bounded on three sides by mountains in which rocks of Precambrian age are exposed. The Basin is asymmetrical with a steep west limb adjacent to the Bighorn Mountains and a gentle east limb adjacent to the Black Hills. Sedimentary rocks within the Basin have a maximum thickness of about 18,000 feet and rocks of every geologic period are represented. Paleozoic rocks are about 2,500 feet thick and consist of marine bonate rocks and sandstone; Mesozoic rocks are about 9,500 feet thick and consist of both marine and nonmarine siltstone and sandstone; and Cenozoic rocks are from 4,000 to 6,000 feet thick and consist of coal-bearing sandstone and shale. Radioactive waste could be stored in the pore space of permeable sandstone or in shale where space could be developed. Many such rock units that could be used for storing radioactive wastes are present within the Powder River Basin. Permeable sandstone beds that may be possible reservoirs for storage of radioactive waste are present throughout the Powder River Basin. These include sandstone beds in the Flathead Sandstone and equivalent strata in the Deadwood Formation, the Tensleep Sandstone and equivalent strata in the Minnelusa Formation and the Sundance Formation in rocks of pre-Cretaceous age. However, most of the possible sandstone reservoirs are in rocks of Cretaceous age and include sandstone beds in the Fall River, Lakota, Newcastle, Frontier, Cody, and Mesaverde Formations. Problems of containment of waste such as clogging of pore space and chemical incompatibility would have to be solved before a particular sandstone unit could be selected for waste disposal. Several thick sequences of impermeable shale such as those in the Skull Creek, Mowry, Frontier, Belle Fourche, Cody, Lewis, and Pierre Formations, occur in rocks of Cretaceous age in the Basin. Limited storage space for liquid waste might be developed in impermeable shale by fracturing the shale and space for calcined or fused waste could be developed by mining cavities.

Sedimentary Rocks of Aram Chaos

NASA Technical Reports Server (NTRS)

2004-01-01

10 May 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows outcroppings of light-toned, layered, sedimentary rock within Aram Chaos, an ancient, partly-filled impact crater located near 3.2oN, 19.9oW. This 1.5 meters (5 feet) per pixel picture is illuminated by sunlight from the left and covers an area about 3 km (1.9 mi) across.

Inclination shallowing in Eocene Linzizong sedimentary rocks from Southern Tibet: correction, possible causes and implications for reconstructing the India-Asia collision

NASA Astrophysics Data System (ADS)

Huang, Wentao; Dupont-Nivet, Guillaume; Lippert, Peter C.; van Hinsbergen, Douwe J. J.; Hallot, Erwan

2013-09-01

A systematic bias towards low palaeomagnetic inclination recorded in clastic sediments, that is, inclination shallowing, has been recognized and studied for decades. Identification, understanding and correction of this inclination shallowing are critical for palaeogeographic reconstructions, particularly those used in climate models and to date collisional events in convergent orogenic systems, such as those surrounding the Neotethys. Here we report palaeomagnetic inclinations from the sedimentary Eocene upper Linzizong Group of Southern Tibet that are ˜20° lower than conformable underlying volcanic units. At face value, the palaeomagnetic results from these sedimentary rocks suggest the southern margin of Asia was located ˜10°N, which is inconsistent with recent reviews of the palaeolatitude of Southern Tibet. We apply two different correction methods to estimate the magnitude of inclination shallowing independently from the volcanics. The mean inclination is corrected from 20.5° to 40.0° within 95 per cent confidence limits between 33.1° and 49.5° by the elongation/inclination (E/I) correction method; an anisotropy-based inclination correction method steepens the mean inclination to 41.3 ± 3.3° after a curve fitting- determined particle anisotropy of 1.39 is applied. These corrected inclinations are statistically indistinguishable from the well-determined 40.3 ± 4.5º mean inclination of the underlying volcanic rocks that provides an independent check on the validity of these correction methods. Our results show that inclination shallowing in sedimentary rocks can be corrected. Careful inspection of stratigraphic variations of rock magnetic properties and remanence anisotropy suggests shallowing was caused mainly by a combination of syn- and post-depositional processes such as particle imbrication and sedimentary compaction that vary in importance throughout the section. Palaeolatitudes calculated from palaeomagnetic directions from Eocene sedimentary rocks of the upper Linzizong Group that have corrected for inclination shallowing are consistent with palaeolatitude history of the Lhasa terrane, and suggest that the India-Asia collision began at ˜20°N by 45-55 Ma.

Structural framework and hydrocarbon potential of Ross Sea, Antarctica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, A.K.; Davey, F.J.

The 400 to 1100-m deep continental shelf of the Ross Sea is underlain by three major sedimentary basins (Eastern basin, Central trough, and Victoria Land basin), which contain 5 to 6 km of sedimentary rock of Late Cretaceous(.) and younger age. An addition 6 to 7 km of older sedimentary and volcanic rocks lie within the Victoria Land basin. Eroded basement ridges of early Paleozoic(.) and older rocks similar to those of onshore Victoria Land separate the basins. The three basins formed initially in late Mesozoic time during an early period of rifting between East and West Antarctica. The Easternmore » basin is a 300-km wide, asymmetric basement trough that structurally opens into the Southern Ocean. A seaward-prograding sequence of late Oligocene and younger glacial deposits covers a deeper, layered sequence of Paleogene(.) and older age. The Central trough, a 100-km wide depression, is bounded by basement block faults and is filled with a nearly flat-lying sedimentary section. A prominent positive gravity anomaly, possibly caused by rift-related basement rocks, lies along the axis of the basin. The Victoria Land basin, unlike the other two basins, additionally contains a Paleogene(.) to Holocene rift zone, the Terror Rift. Rocks in the rift, near the axis of the 150-km wide basement half-graben, show extensive shallow faulting and magmatic intrusion of the sedimentary section. The active Terror rift and older basin structures extend at least 300 km along the base of the Transantarctic Mountains. Petroleum hydrocarbons have not been reported in the Ross Sea region, with possible exception of ethane gas found in Deep Sea Drilling Project cores from the Eastern basin. Model studies indicate that hydrocarbons could be generated at depths of 3.5 to 6 km within the sedimentary section. The best structures for hydrocarbon entrapment occur in the Victoria Land basin and associated Terror Rift.« less

Sedimentary features of the Blackhawk formation (Cretaceous) at Sunnyside, Carbon County, Utah

USGS Publications Warehouse

Maberry, John O.

1968-01-01

The Blackhawk Formation at Sunnyside, Utah, was deposited along the western margin of the Western Interior Cretaceous sea during southeastward withdrawal of the sea. Sand was the dominant type of land-derived sediment deposited in the Sunnyside district during the regressive phases. Sand bodies prograded seaward in response to changing sediment supply from a source west of Sunnyside. Where conditions were favorable for the accumulation of vegetable material, peat deposits formed and were later changed to bituminous Coal by diagenesis. Studies of the coal bed show that the coals were formed from accumulation of small, low-growing plants and plant debris that was transported into the area of accumulation. Remains of large plants in the coals are rare. Trace fossils, which are tracks, trails and burrows formed by organisms and preserved in the rock, are extremely abundant in the Blackhawk rocks. These biogenic sedimentary structures are common in Cretaceous deposits throughout the western United States. Trace fossil distribution in the rocks is controlled by the depositional environment preferred by their creators. A study of the trace fossils of a. locality allows a more precise determination of the conditions during deposition of the sediments. Water depth, bottom conditions, salinity, current velocity and amount of suspended nutrients in the water are some of the environmental factors that may be reconstructed by studying trace fossils. The Blackhawk Formation at Sunnyside comprises the members, the Kenilworth Member and the Sunnyside Member. Field studies show that the formation may be further subdivided in the Sunnyside district., according to the precepts of units of mappable thickness and similar lithologic characteristics. The Blackhawk pinches out eastward and north. ward into the Mancos Shale, and names for submembers become meaningless. Names are of value in the region of interest, however, because of the prominence of the named units. Coal mining is the main industry of the Book Cliffs region. Mines of the Sunnyside district are plagued by coal mine bumps, which are sudden, catastrophic releases of stress in the coal. Bumps cause loss of life, property age, and loss of profit to mining companies. Bumps occur when shear stress built up in the coal exceeds the shear Strength of the coal. Differential overburden pressure, faulting and tectonic activity, and lithology and structure of roof rocks are factors which influence bumps. Petroleum and natural gas (methane), which occur locally in pockets in the roof rocks above coal beds, may be diagenetic products of organic-rich sediments.

Stress-sensitivity of The Hydraulic Properties of A Fault Gouge

NASA Astrophysics Data System (ADS)

Harrington, J. F.; Horseman, S. T.; Hama, K.; Metcalfe, R.

Tono Mine is located about 350 km southwest of Tokyo and is the site of the most extensive uranium deposits in Japan. The geological setting comprises Tertiary (Mizu- nami Group) sedimentary rocks overlying Cretaceous granitic basement rocks. In as- cending order, the sedimentary rocks are the Toki Lignite-bearing Formation (con- glomerate, interbedded sandstone and mudstone), the Akeyo Formation (tuffaceous sandstone) and the Oidawara Formation (siltstone and mudstone). The Tsukiyoshi Fault cuts through this sequence and is a reverse fault, dipping to the south at 60- 70 degrees, with a throw of about 30 metres. As part of its hydrogeological studies, JNC is evaluating the impact of the fault on groundwater flow in the Tertiary sedi- ments. A sample was taken from a borehole in the NATM Drift, where the fault zone contains gouge material with two clay-bearing layers around 2 to 3 cm thick, separated by a 10 to 20 cm thick layer of unconsolidated fine sandy material. The sample was obtained using a triple-tube core barrel fitted with a split sample tube and a diamond bit. A specimen was prepared and consolidated at successive effective stress levels of 2, 6 and 12 MPa. The plot of void ratio against the logarithm of effective stress was found to be sensibly linear with a negative slope, kappa, of 0.036 rising to 0.044 at higher stress levels. The evidence suggests that the gouge is overconsolidated. Hy- draulic conductivity and specific storage were also measured at each stress level using the constant flow rate method. Hydraulic conductivity was found to be strongly stress sensitive, falling from 1.84 x 10-12 m.s-1 at 2 MPa to 7.9 x 10-14 m.s-1 at 12 MPa. Specific storage values were analysed using the critical state soil mechanics approach assuming a stress-dependent pore compressibility. Reasonable agreement was found between the theoretical curve with kappa = 0.036 and the measured values.

Geologic Map of the Clark Peak Quadrangle, Jackson and Larimer Counties, Colorado

USGS Publications Warehouse

Kellogg, Karl S.; Ruleman, Chester A.; Shroba, Ralph R.; Braddock, William A.

2008-01-01

The Clark Peak quadrangle encompasses the southern end of the Medicine Bow Mountains and the northernmost end of the Mummy Range. The Continental Divide traverses the map area and Highway 14 cross the Divide at Cameron Pass, in the southeastern corner of the map. Approximately the eastern half of the map, and a few areas to the west, are underlain by Early Proterozoic plutonic and metamorphic rocks. Most of these basement rocks are part of the ~1,715 Ma Rawah batholith, composed mostly of pinkish, massive to moderately foliated monzogranite and granodiorite intruded by numerous, large pegmatite- aplite bodies. The metamorphic rocks, many of which form large inclusions in the granitic rocks of the Rawah batholith, include biotite-hornblende gneiss, hornblende gneiss, amphibolite, and biotite schist. The crystalline basement rocks are thrust westward along the Medicine Bow thrust over a sequence of sedimentary rocks as old as the Upper Permian Satanka Shale. The Satanka Shale, Middle and Lower Triassic Chugwater group, and a thin sandstone tentatively correlated with the Lower Jurassic and Upper Triassic Jelm Formation are combined as one map unit. This undivided unit is overlain sequentially upward by the Upper Jurassic Sundance Formation, Upper Jurassic Morrison Formation, Lower Cretaceous Dakota Group, Upper and Lower Cretaceous Benton Group, Upper Cretaceous Niobrara Formation, and the Eocene and Paleocene Coalmont Formation. The Late Cretaceous to early Eocene Medicine Bow thrust is folded in places, and several back thrusts produced a complicated thrust pattern in the south part of the map. Early Oligocene magmatism produced rhyolite tuff, dacite and basalt flows, and intermediate dikes and small stocks. A 40Ar/39Ar date on sanidine from one rhyolite tuff is ~28.5 Ma; a similar whole-rock date on a trachybasalt is ~29.6 Ma. A very coarse, unsorted probably pre-Quaternary ridge-top diamicton crops out in the southern part of the quadrangle. Numerous glacial deposits (mostly of Pinedale age), rock glaciers, block-slope deposits, landslide deposits, talus deposits, fan deposits, colluvium, and alluvium comprise the surficial deposits of the map area.

Geochemistry and diagenesis of Miocene lacustrine siliceous sedimentary and pyroclastic rocks, Mytilinii basin, Samos Island, Greece

USGS Publications Warehouse

Stamatakis, M.G.; Hein, J.R.; Magganas, A.C.

1989-01-01

A Late Miocene non-marine stratigraphic sequence composed of limestone, opal-CT-bearing limestone, porcelanite, marlstone, diatomaceous marlstone, dolomite, and tuffite crops out on eastern Samos Island. This lacustrine sequence is subdivided into the Hora Beds and the underlying Pythagorion Formation. The Hora Beds is overlain by the clastic Mytilinii series which contains Turolian (Late Miocene) mammalian fossils. The lacustrine sequence contains volcanic glass and the silica polymorphs opal-A, opal-CT, and quartz. Volcanic glass predominantly occurs in tuffaceous rocks from the lower and upper parts of the lacustrine sequence. Opal-A (diatom frustules) is confined to layers in the upper part of the Hora Beds. Beds rich in opal-CT underlie those containing opal-A. The occurrence of opal-CT is extensive, encompassing the lower Hora Beds and the sedimentary rocks and tuffs of the Pythagorion Formation. A transition zone between the opal-A and opal-CT zones is identified by X-ray diffraction patterns that are intermediate between those of opal-CT and opal-A, perhaps due to a mixture of the two polymorphs. Diagenesis was not advanced enough for opal-CT to transform to quartz or for volcanic glass to transform to opal-C. Based on geochemical and mineralogical data, we suggest that the rate of diagenetic transformation of opal-A to opal-CT was mainly controlled by the chemistry of pore fluids. Pore fluids were characterized by high salinity, moderately high alkalinity, and high magnesium ion activity. These pore fluid characteristics are indicated by the presence of evaporitic salts (halite, sylvite, niter), high boron content in biogenic silica, and by dolomite in both the opal-A and opal-CT-bearing beds. The absence of authigenic K-feldspar, borosilicates, and zeolites also support these pore fluid characteristics. Additional factors that influenced the rate of silica diagenesis were host rock lithology and the relatively high heat flow in the Aegean region from Miocene to Holocene. ?? 1989.

The Conterminous United States Mineral Assessment Program; background information to accompany folio of geologic, geophysical, geochemical, mineral-occurrence, mineral-resource potential, and mineral-production maps of the Charlotte 1 degree x 2 degrees Quadrangle, North Carolina and South Carolina

USGS Publications Warehouse

Gair, Jacob Eugene; Goldsmith, Richard; Daniels, D.L.; Griffitts, W.R.; DeYoung, J.H.; Lee, M.P.

1986-01-01

This Circular and the folio of separately published maps described herein are part of a series of reports compiled under the Conterminous United States Mineral Assessment Program ICUSMAP). The folio on the Charlotte 1 degree ? 2 degree quadrangle, North Carolina and South Carolina, includes (1) a geologic map; (2) four geophysical maps; (3) geochemical maps for metamorphic heavy minerals, copper, lead and artifacts, zinc, gold, tin, beryllium, niobium, tungsten, molybdenum, titanium, cobalt, lithium, barium, antimony-arsenic-bismuth-cadmium, thorium-cerium-monazite, and limonite; (4) mineral-occurrence maps for kyanite-sillimanite-lithium-mica-feldspar-copper-lead-zinc, gold-quartz-barite-fluorite, iron-thorium-tin-niobium, and construction materials-gemstones; (5) mineral-resource potential maps for copper-lead-zinc-combined base metals, gold, tin-tungsten, beryllium-molybdenum-niobium, lithium-kyanite- sillimanitebarite, thorium (monazite)-uranium, and construction materials; and (6) mineral-production maps. The Charlotte quadrangle is mainly within the Piedmont physiographic province and extends from near the Coastal Plain on the southeast into the Blue Ridge province on the northwest for a short distance. Parts of six lithotectonic belts are present--the Blue Ridge, the Inner Piedmont, the Kings Mountain belt, the Charlotte belt, the Carolina slate belt, and the Wadesboro basin. Igneous, metamorphic, and sedimentary rocks are present and range in age from Proterozoic to Mesozoic; alluvial sediments of Quaternary age occur along rivers and larger streams. Rocks of the Blue Ridge include Middle Proterozoic granitoid gneiss intruded by Late Proterozoic granite; Late Proterozoic paragneiss, schist, and other metasedimentary and metavolcaniclastic rocks (Ashe and Grandfather Mountain Formations); Late Proterozoic and Early Cambrian metasedimentary rocks (Chilhowee Group); and Early Cambrian sedimentary rocks (Shady Dolomite). Paleozoic granites intrude the Proterozoic rocks. The Inner Piedmont contains noncarbonate metasedimentary rocks and amphibolite of medium to high metamorphic grades. These rocks are intruded by the Toluca Granite and Henderson Gneiss of Cambrian and Ordovician(?) age. The Charlotte belt consists largely of Late Proterozoic to Late Paleozoic granitic and gabbroic plutonic rocks and intervening enclaves of metasedimentary and metavolcanic rocks. The narrow Kings Mountain belt is located between the Charlotte and the Inner Piedmont belts and contains mainly Late Proterozoic metasedimentary rocks and plutonic rocks similar to those of the Charlotte belt. The Carolina slate belt, flanking the Charlotte belt on the east, contains weakly metamorphosed volcanic and sedimentary rocks. East of this belt, at the southeast corner of the quadrangle, is the Wadesboro basin, which has continental sedimentary rocks of Triassic age. Layered rocks westward from and in the Charlotte belt are complexly folded, are steeply dipping, and in the Blue Ridge and Inner Piedmont are contained within major thrust slices. Rocks of the Carolina slate belt are gently folded. Rocks of the Wadesboro basin occur in downfaulted blocks. The geophysical surveys of the Charlotte quadrangle consisted of Bouguer gravity, aeromagnetic, and aeroradioactivity surveys and used both newly obtained data and information from prior work. The gravity survey disclosed a distinct northeast-trending, northwest-decreasing gradient, which is part of the major gravity gradient that extends the length of the Appalachian Mountains. Granitic plutons of the Charlotte belt, in particular, are marked by gravity lows, and gabbro plutons, by highs. Several of the geologic belts display distinct magnetic character. The aeroradioactivity surveys showed a swath of consistently high gamma-ray intensities along the central part of the Inner Piedmont belt; these high intensities correspond to the so-called monazite belt. Oval patterns of high gamma-ray readi

Basin formation and Neogene sedimentation in a backarc setting, Halmahera, eastern Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, R.; Nichols, G.J.

1991-03-01

It has been proposed that basins in backarc setting form in association with subduction by thinning of continental crust, backarc spreading in oceanic crust, compression, or trapping of pieces of oceanic plate behind an arc. The Halmahera basin in eastern Indonesia developed in a backarc setting but does not fall into these categories; it formed by subsidence of thickened crust made up of imbricated Mesozoic-Paleogene arc and ophiolite rocks. Halmahera lies at the western edge of the Philippine Sea Plate in a complex zone of convergence between the Eurasian margin, the oceanic plates of the West Pacific, and the Australian/Indianmore » Plate to the south. The basement is an imbricated complex of Mesozoic to Paleogene ophiolite, arc, and arc-related rocks. During the Miocene this basement complex formed an area of thickened crust upon which carbonate reef and reef-associated sediments were deposited. The authors interpret this shallow marine region to be similar to many of the oceanic plateaus and ridges found within the Philippine Sea Plate today. In the Late Miocene, convergence between the Philippine Sea Plate and the Eurasian margin resulted in the formation of the Halmahera Trench to the west of this region of thickened crust. Subduction of the Molucca Sea Plate caused the development of a volcanic island arc. Subsidence in the backarc area produced a broad sedimentary basin filled by clastics eroded from the arc and from uplifted basement and cover rocks. The basin was asymmetric with the thickest sedimentary fill on the western side, against the volcanic arc. The Halmahera basin was modified in the Plio-Pleistocene by east-west compression as the Molucca Sea Plate was eliminated by subduction.« less

Fluvial channel-belts, floodbasins, and aeolian ergs in the Precambrian Meall Dearg Formation (Torridonian of Scotland): Inferring climate regimes from pre-vegetation clastic rock records

NASA Astrophysics Data System (ADS)

Lebeau, Lorraine E.; Ielpi, Alessandro

2017-07-01

The interpretation of climate regimes from facies analysis of Precambrian clastic rocks has been challenging thus far, hindering full reconstructions of landscape dynamics in pre-vegetation environments. Yet, comparisons between different and co-active sedimentary realms, including fluvial-channelised, floodplain, and aeolian hold the potential to shed further light on this thematic. This research discusses a fluvial-aeolian record from the 1.2 Ga Meall Dearg Formation, part of the classic Torridonian succession of Scotland. Tentatively considered to date as a braided-fluvial deposit, this unit is here reappraised as the record of fluvial channel-belts, floodbasins, and aeolian ergs. Fluvial deposits with abundant transitional- to upper-flow regime structures (mostly cross-beds with tangential sets and plane/antidunal beds) and simple, low-relief sediment bars indicate a low-sinuosity, ephemeral style. Floodbasin deposits consist of plane and cross-beds ubiquitously bounded by symmetrical ripples, and rare sediment bars related to the progradation of splay complexes in temporary flooded depressions. Aeolian deposits occur nearby basement topography, and are dominated by large-scale, pin-stripe laminated cross-beds, indicative of intermountain ergs. Neither ephemeral-fluvial nor intermountain aeolian systems can be considered as reliable indicators of local climate, since their sedimentary style is respectively controlled by catchment size and shape, and basin topography relative to groundwater tables. Contrarily, the occurrence of purely clastic - rather than carbonate or evaporitic - floodplain strata can be more confidently related to humid regimes. In brief, this study provides new insight into an overlooked portion of the Torridonian succession of Scotland, and discusses climate inferences for Precambrian clastic terrestrial rocks.

Alteration in the Madera Limestone and Sandia Formation from core hole VC-1, Valles caldera, New Mexico

USGS Publications Warehouse

Keith, T.E.C.

1988-01-01

Core hole VC-1 penetrated the southwestern ring fracture zone of the 1.1 Ma Valles caldera and at a depth of 333 m intersected the top of the Paleozoic section including the Abo Formation, Madera Limestone, and Sandia Formation, reaching a total depth of 856 m. The Paleozoic rocks, which consist of thin-bedded limestone, siltstone, mudstone, sandstone, and local conglomerate, are overlain by volcanic rocks of the caldera moat that are less than 0.6 Ma. Diagenetic and at least three hydrothermal alteration stages were identified in the Madera Limestone and Sandia Formation. Diagenetic clay alteration was pervasive throughout the sedimentary rocks. Volcanic activity at 16.5 Ma and continuing through the formation of the Valles caldera resulted in high thermal gradients, which caused recrystallization of diagenetic clay minerals. Interstratified smectite-illite is the most diagnostic clay mineral throughout the section; structurally, the illite component in the ordered interstratified illite-smectite changes gradationally from 70% at the top of the Madera Limestone to 95% at the base of the section in the Sandia Formation. Pyrite that occurs as small clots and lenses as well as finely disseminated is interpreted as being of diagenetic origin, especially in organic-rich beds. Low permeability of much of the paleozoic section precluded the deposition of hydrothermal minerals except in fractures and intergranular space in some of the more permeable sandstone and brecciated horizons. Three stages of hydrothermal mineral deposition are defined. -from Author

National Uranium Resource Evaluation: Wells Quadrangle, Nevada, Idaho, and Utah

DOE Office of Scientific and Technical Information (OSTI.GOV)

Proffitt, J.L.; Mayerson, D.L.; Parker, D.P.

1982-08-01

The Wells 2/sup 0/ Quadrangle, Nevada, Idaho, and Utah, was evaluated using National Uranium Resource Evaluation criteria to delineate areas favorable for uranium deposits. Our investigation has resulted in the delineation of areas that contain Tertiary sedimentary rocks favorable for hydroallogenic deposits in the Mountain City area (Favorable Area A) and in the Oxley Peak area north of Wells (Favorable Area B). Environments considered to be unfavorable for uranium deposits include Tertiary felsic volcanic, felsic plutonic, intermediate to mafic volcanic, Paleozoic and Mesozoic sedimentary rocks, Precambrian rocks, and most Tertiary sedimentary rocks located outside the favorable areas. Present-day basins aremore » unevaluated environments because of a paucity of adequate outcrop and subsurface data. However, the scarce data indicate that some characteristics favorable for uranium deposits are present in the Susie Creek-Tule Valley-Wild Horse basin, the Contact-Granite Range-Tijuana John stocks area, the Charleston Reservoir area, and the Wells-Marys River basin.« less

Preservation of Fe Isotope Proxies in the Rock Record

NASA Astrophysics Data System (ADS)

Johnson, C.; Beard, B.; Valley, J.; Valaas, E.

2005-12-01

Iron isotope variations provide powerful constraints on redox conditions and pathways involved during biogeochemical cycling of Fe in surface and near-surface environments. The relative isotopic homogeneity of igneous rocks and most bulk weathering products contrasts with the significant isotopic variations (4 per mil in 56Fe/54Fe) that accompany oxidation of Fe(II)aq, precipitation of sulfides, and reduction by bacteria. These isotopic variations often reflect intrinsic (equilibrium) Fe isotope fractionations between minerals and aqueous species whose interactions may be directly or indirectly catalyzed by bacteria. In addition, Fe isotope exchange may be limited between reactive Fe pools in low-temperature aqueous-sediment environments, fundamentally reflecting disequilibrium effects. In the absence of significant sulfide, dissimilatory Fe(III) reduction by bacteria produces relatively low 56Fe/54Fe ratios for Fe(II)aq and associated biogenic minerals such as magnetite and siderite. In contrast, Fe(II)aq that exchanges with Fe sulfides (FeS and pyrite) is relatively enriched in 56Fe/54Fe ratios. In modern and ancient environments, anoxic diagenesis tends to produce products that have low 56Fe/54Fe ratios, whereas oxidation of Fe(II)aq from hydrothermal sources tends to produce ferric Fe products that have high 56Fe/54Fe ratios. Redox cycling by bacteria tends to produce reactive ferric Fe reservoirs that have low 56Fe/54Fe ratios. Application of Fe isotopes as a proxy for redox conditions in the ancient rock record depends upon the preservation potential during metamorphism, given the fact that most Archean sedimentary sequences have been subjected to regional greenschist- to granulite-facies metamorphism. The 1.9 Ga banded iron formations (BIFs) of the Lake Superior region that are intruded by large ~1 Ga intrusions (e.g., Duluth gabbro) provide a test of the preservation potential for primary, low-temperature Fe isotope variations in sedimentary rocks. 56Fe/54Fe ratios for re-crystallized magnetite from BIFs of the Biwabik iron formation that have apparent oxygen-isotope (quartz-magnetite) temperatures between 270 and 800 oC span a significant portion of the range measured in lower-grade BIFs from South Africa and Australia. d56Fe values for Biwabik magnetite vary from -0.2 to +0.7 per mil, whereas magnetite from the Dales Gorge member of the Brockman iron formation and the Kuruman iron formation has d56Fe values that lie between -1.2 and +1.3 per mil. Iron isotope fractionations between magnetite and Fe silicates (greenalite, hedenbergite, and fayalite) in the Biwabik iron formation regularly decrease with increasing oxygen-isotope temperatures, approaching the zero fractionation expected at igneous temperatures; apparent magnetite-Fe silicate fractionations range from +0.2 per mil at 650 oC to +0.5 per mil at 300 oC, lying close to those predicted using the revised beta factors of Polyakov et al. (2005, Goldschmidt). During closed-system Fe isotope exchange during metamorphism, the overall range in d56Fe values for magnetite will remain relatively constant, although it may shift to higher d56Fe values relative to primary (low-temperature) magnetite due to the non-zero magnetite-Fe silicate fractionation factor at moderate temperature ranges. If the mineral parageneis is known, and some assumptions regarding primary mineralogy can be made, these small corrections may be made to successfully infer the original Fe isotope compositions of sedimentary minerals and rocks that have been subjected to metamorphism.

The Totumo mud volcano and its near-shore marine sedimentological setting (North Colombia) - From sedimentary volcanism to epithermal mineralization

NASA Astrophysics Data System (ADS)

Dill, H. G.; Kaufhold, S.

2018-04-01

The Holocene mud volcano exposed at Totumo (younger than 4150 ± 50 yr BP) lines up together with some other landforms of its kind along the Caribbean Coast in northern Colombia. It currently vents a mud of the silicate-phosphate-bearing sulfur-sodium chloride type. The mud volcanoes evolved in an active continental margin setting of the South American Cordillera with high seismicity and affected by pervasive neotectonic structural disturbances. During the Neogene and Quaternary linear terrigenous shoreline sediments alternating with delta deposits evolved on this mobile crustal segment between the Andes and ancient Precambrian cratons. Meso- to microtidal sedimentary settings during transgression and progradation created meta- to instable sedimentary and petrophysical conditions (e.g. overpressure and gas-bearing bubble sands), favorable for the formation of mud volcanoes, whose lithofacies is subdivided into (1) footwall facies (detritus from metabasic, -pelitic source rocks), (2) mud volcano plus lateral facies (material from deep-seated hydrothermal sources, hydrocarbon plays, and brine reflux from the sea), (3) hanging wall facies, sand characterized by a strong longshore drift. The sedimentary volcanism in the area is characterized by different temperatures of formation: (1) pre-stage (<100 °C) and (2) recent stage (≈25 °C). Heavy (pyroxene, amphibole, epidote-clinozoisite, Fe-Ti silicates and oxides, garnet, alumosilicates, tourmaline, zircon, barite, Fe sulfides and -sulfates), light (Ca sulfates, calcite, quartz, feldspar) and clay minerals (kaolinite, mica, pyrophyllite, chlorite, vermiculite) are efficient tools to determine the source of mud, to subdivide the mud volcano system as to its facies and describe its physical-chemical regime as to the temperature of formation, pH and Eh values. The mud volcano system of Totumo bridges the gap between sedimentary "volcanism" and epithermal hot spring deposits of intermediate to high sulfidation and forms a useful "guide" to hydrocarbon accumulation.

Permanganate diffusion and reaction in sedimentary rocks.

PubMed

Huang, Qiuyuan; Dong, Hailiang; Towne, Rachael M; Fischer, Timothy B; Schaefer, Charles E

2014-04-01

In situ chemical oxidation using permanganate has frequently been used to treat chlorinated solvents in fractured bedrock aquifers. However, in systems where matrix back-diffusion is an important process, the ability of the oxidant to migrate and treat target contaminants within the rock matrix will likely determine the overall effectiveness of this remedial approach. In this study, a series of diffusion experiments were performed to measure the permanganate diffusion and reaction in four different types of sedimentary rocks (dark gray mudstone, light gray mudstone, red sandstone, and tan sandstone). Results showed that, within the experimental time frame (~2 months), oxidant migration into the rock was limited to distances less than 500 μm. The observed diffusivities for permanganate into the rock matrices ranged from 5.3 × 10(-13) to 1.3 × 10(-11) cm(2)/s. These values were reasonably predicted by accounting for both the rock oxidant demand and the effective diffusivity of the rock. Various Mn minerals formed as surface coatings from reduction of permanganate coupled with oxidation of total organic carbon (TOC), and the nature of the formed Mn minerals was dependent upon the rock type. Post-treatment tracer testing showed that these Mn mineral coatings had a negligible impact on diffusion through the rock. Overall, our results showed that the extent of permanganate diffusion and reaction depended on rock properties, including porosity, mineralogy, and organic carbon. These results have important implications for our understanding of long-term organic contaminant remediation in sedimentary rocks using permanganate. Copyright © 2014 Elsevier B.V. All rights reserved.

Reconnaissance geology of the Wadi Wassat quadrangle, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, William C.; Rossman, D.L.

1970-01-01

The Wadi Wassat quadrangle covers an area of 2926 sq km in the southwestern part of the Kingdom of Saudi Arabia. The west half of the quadrangle is underlain by crystalline rocks of the Arabian Shield, but in the eastern half of the quadrangle the Precambrian rocks are covered by Permian or older sandstone which is succeeded farther east by aeolian sands of Ar Rub' al Khali. The Shield consists of a sequence of unmetamorphosed to metamorphosed interlayered volcanic and sedimentary rocks intruded by igneous rocks ranging in composition from gabbro to syenite and in age from Precambrian to Cambrian(?). The volcanic rocks range in composition from andesite to rhyolite and in texture from agglomerate to thick, massive flows and lithic tuff. They are interlayered with conglomerate, fine-grained graywacke sandstone, calcareous graywacke, siltstone, tuffaceous laminated shale, pyritiferous sediment, carbonaceous shale, limestone, and dolomite. Most clastic debris is derived from andesite. In places the rocks are polymetamorphosed; elsewhere they are unmetamorphosed. The rocks on which this volcano-sedimentary eugeosynclinal sequence was deposited are not exposed in the area of the quadrangle. Reglonal dynamothermal metamorphism was .the dominant process affecting the volcanic-sedimentary rocks in the western part of the quadrangle. In the eastern part of the Precambrian area the chief metamorphic effect results from contact action along the walls of intrusive plutons. The oldest igneous rock to intrude the volcanic-sedimentary sequence, after the dikes and sills of the sequence itself, is granite gneiss and gneissic granodiorite. The gneiss is sparsely present in the quadrangle, but northwest of the quadrangle it forms an immense batholith which is one of the major geologic features of southwestern Arabia. However, the most common intrusive rocks of the quadrangle are a magnetic differentiation sequence that ranges in composition from gabbro and diorite to granite, rhyolite, and syenite. The siliceous members of the differentiation sequence commonly contain aluminous pyroxene or amphibole, and to the sequence the name peralkalic magma series has been given. Plutonic rocks of the series are widely intruded by hypabyssal rocks of the series. In most places, the older hypabyssal rocks tend to form interior dikes in the plutonic rocks, and the younger hypabyssal rocks commonly form the exterior dike swarms outside the plutonic rocks of the magma series. Many exterior dike swarms are concentrated in roof pendants of volcano-sedimentary rocks over the plutonic members of the magma series. Isotopic ages of rocks in the peralkalic magma series range from 598 +/-24 m.y. to 509 +/-15 m.y. by K/Ar and Rb/Sr methods. A profound angular unconformity exists between the Precambrian and Cambrian(?) crystalline rocks and the Permian or older sandstone which laps onto the Shield from the east and south. This sandstone, is reddish-brown, yellow, tan, and white called Wajid Sandstone, crossbedded sandstone with ferruginous cement and concretions in some layers. Locally, the rocks underlying the Wajid Sandstone are deeply weathered. Poorly sorted alluvial sand and gravel mantle the wadi floors. In the northeastern and southwestern parts of the quadrangle well-sorted aeolian sand is common. The volcanic and sedimentary rocks of the quadrangle are part of the east limb of an immense synclinorium(?) that closes south-westward around a batholitic core of gneissic granite and granodiorite. These layered rocks were isoclinally folded along northerly and north-northeasterly trending axes prior to the intrusion of the peralkalic magma series. During intrusion, the layered rocks were again folded as they were pushed aside, and major old regional northerly faults were reactivated with persistent left-lateral displacement. Reconnaissance geochemical sampling disclosed several notable groupings of threshold and anomalous elements with spe

Origin of middle rare earth element enrichments in acid waters of a Canadian high Arctic lake.

NASA Astrophysics Data System (ADS)

Johannesson, Kevin H.; Zhou, Xiaoping

1999-01-01

-Middle rare earth element (MREE) enriched rock-normalized rare earth element (REE) patterns of a dilute acidic lake (Colour Lake) in the Canadian High Arctic, were investigated by quantifying whole-rock REE concentrations of rock samples collected from the catchment basin, as well as determining the acid leachable REE fraction of these rocks. An aliquot of each rock sample was leached with 1 N HNO 3 to examine the readily leachable REE fraction of each rock, and an additional aliquot was leached with a 0.04 M NH 2OH · HCl in 25% (v/v) CH 3COOH solution, designed specifically to reduce Fe-Mn oxides/oxyhydroxides. Rare earth elements associated with the leachates that reacted with clastic sedimentary rock samples containing petrographically identifiable Fe-Mn oxide/oxyhydroxide cements and/or minerals/amorphous phases, exhibited whole-rock-normalized REE patterns similar to the lake waters, whereas whole-rock-normalized leachates from mafic igneous rocks and other clastic sedimentary rocks from the catchment basin differed substantially from the lake waters. The whole-rock, leachates, and lake water REE data support acid leaching or dissolution of MREE enriched Fe-Mn oxides/oxyhydroxides contained and identified within some of the catchment basin sedimentary rocks as the likely source of the unique lake water REE patterns. Solution complexation modelling of the REEs in the inflow streams and lake waters indicate that free metal ions (e.g., Ln 3+, where Ln = any REE) and sulfate complexes (LnSO 4+) are the dominant forms of dissolved REEs. Consequently, solution complexation reactions involving the REEs during weathering, transport to the lake, or within the lake, cannot be invoked to explain the MREE enrichments observed in the lake waters.

Evaluating CO2 mineralization capacity of sedimentary rock Using BCR sequential extraction procedures

NASA Astrophysics Data System (ADS)

Yang, Gang-Ting; Yu, Chi-Wen; Yang, Hsiao-Ming; Chiao, Chung-Hui; Yang, Ming-Wei

2015-04-01

To relief the high concentration of carbon dioxide in the atmosphere, carbon capture and storage (CCS) is gradually becoming an important concept to reduce greenhouse gas emissions. In IPCC Special Report on CCS, the storage mechanisms for geological formations are categorized into structural/stratigraphic, hydrodynamic and geochemical trappings. Geochemical trapping is considered as a storage mechanism, which can further increase storage capacity, effectiveness and security in terms of permanent CO2 sequestration. The injected CO2 can have geochemical interactions with pore fluid and reservoir rocks and transform into minerals. It is important to evaluate the capacity of reservoir rock for sequestrating CO2. In this study, sedimentary rock samples were collected from a 2-km-deep well in Midwestern Taiwan; and, the BCR sequential extraction experiments developed by European Union Measurement and Testing Programme were conducted. BCR was designed for extracting three major phases from soil, including exchangeable phase and carbonates (the first stage), reducible phase (the second stage) and oxidizable phase (the third stage). The chemistry of extracted solutions and rock residues were measured with ICP-MS and XRF, respectively. According to the results of XRF, considerable amounts of calcium and iron can be extracted by BCR procedures but other cations are negligible. In general, shale has a higher capacity of CO2 sequestration than sandstone. The first stage of extraction can release about 6 (sandstone) to 18.5 (shale) g of calcium from 1 kg rock, which are equivalent to 6.6 and 20.4 g CO2/kg rock, respectively. In the second stage extraction, 0.71 (sandstone) to 1.38 (shale) g/kg rock of iron can be released and can mineralized 0.56 to 1.08 g CO2/kg rock. However, there are no considerable cations extracted in the third stage of BCR as shown by the XRF analysis. In addition, the results of ICP-MS show that Mg can be released in the order of 10-3 g from 1 kg rock while cations of Zn, Co, Ni, Cd, Pb, Cu and Ba are in the order of 10-4 g.

Rock Slope Design Criteria

DOT National Transportation Integrated Search

2010-06-01

Based on the stratigraphy and the type of slope stability problems, the flat lying, Paleozoic age, sedimentary : rocks of Ohio were divided into three design units: 1) competent rock design unit consisting of sandstones, limestones, : and siltstones ...

Experimental Approaches to Understanding Surficial Processes on Mars: The Stony Brook Experience 2000-2016

NASA Astrophysics Data System (ADS)

McLennan, S. M.; Dehouck, E.; Hurowitz, J.; Lindsley, D. H.; Schoonen, M. A.; Tosca, N. J.; Zhao, Y. Y. S.

2016-12-01

Starting with Pathfinder and Global Surveyor, recent missions to Mars have provided great opportunity for low-temperature experimental geochemistry investigations of the Martian sedimentary record by providing geochemical and mineralogical data that can be used as meaningful tests for experiments. These missions have documented a long-lived, complex and dynamic sedimentary rock cycle, including "source-to-sink" sedimentary systems and global paleoenvironmental transitions through time. We designed and constructed an experimental facility, beginning in 2000, specifically to evaluate surficial processes on Mars. Our experimental philosophy has been to (1) keep apparatus simple and flexible, and if feasible maintain sample access during experiments; (2) use starting materials (minerals, rocks) close to known Mars compositions (often requiring synthesis); (3) address sedimentary processes supported by geological investigations at Mars; (4) begin with experiments at standard conditions so they are best supported by thermodynamics; (5) support experiments with thermodynamic-kinetic-mass balance modeling in both design and interpretation, and by high quality chemical, mineralogical and textural lab analyses; (6) interpret results in the context of measurements made at Mars. Although eliciting much comment in proposal and manuscript reviews, we have not attempted to slavishly maintain "Mars conditions", doing so only to the degree required by variables being tested in any given experiments. Among the problems we have addressed are (1) Amazonian alteration of rock surfaces; (2) Noachian-Hesperian chemical weathering; (3) epithermal alteration of `evolved' igneous rocks; (4) mineral surface chemical reactivity from aeolian abrasion; (5) evaporation of mafic brines; (6) early diagenesis of sedimentary iron mineralogy; (7) trace element and halogen behavior during chemical weathering and diagenesis; (8) photochemical influences on halogen distribution and speciation; (9) post-depositional stability of sedimentary amorphous materials.

Classification Scheme for Diverse Sedimentary and Igneous Rocks Encountered by MSL in Gale Crater

NASA Technical Reports Server (NTRS)

Schmidt, M. E.; Mangold, N.; Fisk, M.; Forni, O.; McLennan, S.; Ming, D. W.; Sumner, D.; Sautter, V.; Williams, A. J.; Gellert, R.

2015-01-01

The Curiosity Rover landed in a lithologically and geochemically diverse region of Mars. We present a recommended rock classification framework based on terrestrial schemes, and adapted for the imaging and analytical capabilities of MSL as well as for rock types distinctive to Mars (e.g., high Fe sediments). After interpreting rock origin from textures, i.e., sedimentary (clastic, bedded), igneous (porphyritic, glassy), or unknown, the overall classification procedure (Fig 1) involves: (1) the characterization of rock type according to grain size and texture; (2) the assignment of geochemical modifiers according to Figs 3 and 4; and if applicable, in depth study of (3) mineralogy and (4) geologic/stratigraphic context. Sedimentary rock types are assigned by measuring grains in the best available resolution image (Table 1) and classifying according to the coarsest resolvable grains as conglomerate/breccia, (coarse, medium, or fine) sandstone, silt-stone, or mudstone. If grains are not resolvable in MAHLI images, grains in the rock are assumed to be silt sized or smaller than surface dust particles. Rocks with low color contrast contrast between grains (e.g., Dismal Lakes, sol 304) are classified according to minimum size of apparent grains from surface roughness or shadows outlining apparent grains. Igneous rocks are described as intrusive or extrusive depending on crystal size and fabric. Igneous textures may be described as granular, porphyritic, phaneritic, aphyric, or glassy depending on crystal size. Further descriptors may include terms such as vesicular or cumulate textures.

Assessment of undiscovered conventional oil and gas resources of the Western Canada Sedimentary Basin, Canada, 2012

USGS Publications Warehouse

Higley, Debra K.

2013-01-01

The U.S. Geological Survey recently completed a geoscience-based assessment of undiscovered oil and gas resources of provinces within the Western Canada Sedimentary Basin. The Western Canada Sedimentary Basin primarily comprises the (1) Alberta Basin Province of Alberta, eastern British Columbia, and the southwestern Northwest Territories; (2) the Williston Basin Province of Saskatchewan, southeastern Alberta, and southern Manitoba; and (3) the Rocky Mountain Deformed Belt Province of western Alberta and eastern British Columbia. This report is part of the U.S. Geological Survey World Petroleum Resources Project assessment of priority geologic provinces of the world. The assessment was based on geoscience elements that define a total petroleum system (TPS) and associated assessment unit(s). These elements include petroleum source rocks (geochemical properties and petroleum generation, migration, and accumulation), reservoir description (reservoir presence, type, and quality), and petroleum traps (trap and seal types, and timing of trap and seal formation relative to petroleum migration). Using this framework, the Elk Point-Woodbend Composite TPS, Exshaw-Fernie-Mannville Composite TPS, and Middle through Upper Cretaceous Composite TPS were defined, and four conventional assessment units within the total petroleum systems were quantitatively assessed for undiscovered resources in the Western Canada Sedimentary Basin.

Isotopic data for Late Cretaceous intrusions and associated altered and mineralized rocks in the Big Belt Mountains, Montana

USGS Publications Warehouse

du Bray, Edward A.; Unruh, Daniel M.; Hofstra, Albert H.

2017-03-07

The quartz monzodiorite of Mount Edith and the concentrically zoned intrusive suite of Boulder Baldy constitute the principal Late Cretaceous igneous intrusions hosted by Mesoproterozoic sedimentary rocks of the Newland Formation in the Big Belt Mountains, Montana. These calc-alkaline plutonic masses are manifestations of subduction-related magmatism that prevailed along the western edge of North America during the Cretaceous. Radiogenic isotope data for neodymium, strontium, and lead indicate that the petrogenesis of the associated magmas involved a combination of (1) sources that were compositionally heterogeneous at the scale of the geographically restricted intrusive rocks in the Big Belt Mountains and (2) variable contamination by crustal assimilants also having diverse isotopic compositions. Altered and mineralized rocks temporally, spatially, and genetically related to these intrusions manifest at least two isotopically distinct mineralizing events, both of which involve major inputs from spatially associated Late Cretaceous igneous rocks. Alteration and mineralization of rock associated with the intrusive suite of Boulder Baldy requires a component characterized by significantly more radiogenic strontium than that characteristic of the associated igneous rocks. However, the source of such a component was not identified in the Big Belt Mountains. Similarly, altered and mineralized rocks associated with the quartz monzodiorite of Mount Edith include a component characterized by significantly more radiogenic strontium and lead, particularly as defined by 207Pb/204Pb values. The source of this component appears to be fluids that equilibrated with proximal Newland Formation rocks. Oxygen isotope data for rocks of the intrusive suite of Boulder Baldy are similar to those of subduction-related magmatism that include mantle-derived components; oxygen isotope data for altered and mineralized equivalents are slightly lighter.

Structural evolution and petroleum productivity of the Baltic basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ulmishek, G.F.

The Baltic basin is an oval depression located in the western part of the Russian craton; it occupies the eastern Baltic Sea and adjacent onshore areas. The basin contains more than 5,000 m of sedimentary rocks ranging from latest Proterozoic to Tertiary in age. These rocks consist of four tectonostratigraphic sequences deposited during major tectonic episodes of basin evolution. Principal unconformities separate the sequences. The basin is underlain by a rift probably filled with Upper Proterozoic rocks. Vendian and Lower Cambrian rocks (Baikalian sequence) form two northeast-trending depressions. The principal stage of the basin development was during deposition of amore » thick Middle Cambrian-Lower Devonian (Caledonian) sequence. This stage was terminated by the most intense deformations in the basin history. The Middle Devonian-Carboniferous (Hercynian) and Permian-Tertiary (Kimmerian-Alpine) tectonic and depositional cycles only slightly modified the basin geometry and left intact the main structural framework of underlying rocks. The petroleum productivity of the basin is related to the Caledonian tectonostratigraphic sequence that contains both source rocks and reservoirs. However, maturation of source rocks, migration of oil, and formation of fields took place mostly during deposition of the Hercynian sequence.« less

Importance of lithology in defining natural background concentrations of Cr, Cu, Ni, Pb and Zn in sedimentary soils, northeastern Brazil.

PubMed

Gloaguen, Thomas Vincent; Passe, José João

2017-11-01

The sedimentary basins of Recôncavo and Tucano, Bahia, represent the most important Brazilian Phanerozoic continental basin system, formed during fracturing of Gondwana. The northern basin of Tucano has a semiarid climate (Bsh) while the southern basin of Recôncavo has a tropical rainforest climate (Af). The aim of this study was to determine the distribution of trace metals in soils derived from various sedimentary rocks and climates. Soils were collected at 30 sites in 5 geological units at 0-20 cm and 60-80 cm deep under native vegetation. Physical and chemical attributes (particle size distribution, pH, Al, exchangeable bases, organic matter) were determined, as well as the pseudo-total concentrations (EPA 3050 b) and the total concentrations (X-ray fluorescence) of Cr, Cu, Ni, Pb and Zn. The concentrations of metals were overall correlated to soil texture, according to lithologic origin. Shales resulted in Vertisols 30.4 (Zn), 27.2 (Ni), 16.9 (Cu), 7.5 (Cr) and 2.5 (Pb) times more concentrated than Arenosols derived from the sandstones. High Cr and Ni values in clay soils from shales were attributed to diffuse contamination by erosion of mafic rocks of the Greenstone Belt River Itapicuru (from 3 km northwest of the study area) during the late Jurassic. Tropical rainforest climate resulted in a slight enrichment of Pb and Cr, and Ni had the higher mobility during soil formation (enrichment factor up to 6.01). In conclusion, the geological environment is a much more controlling factor than pedogenesis in the concentration of metals in sedimentary soils. Copyright © 2017 Elsevier Ltd. All rights reserved.

Distal alluvial fan sediments in early Proterozoic red beds of the Wilgerivier formation, Waterberg Group, South Africa

NASA Astrophysics Data System (ADS)

Van Der Neut, M.; Eriksson, P. G.; Callaghan, C. C.

The 1900 - 1700 M.a. Waterberg Group belongs to a series of southern African cratonic cover sequences of roughly equivalent age. Red beds of the Wilgerivier Formation comprise sandstones, interbedded with subordinate conglomerates and minor mudrocks. These immature sedimentary rocks exhibit lenticular bedding, radial palaeocurrent patterns and features indicative of both streamflow and gravity-flow deposition. A distal wet alluvial fan palaeoenvironmental setting is envisaged, with fan-deltas forming where alluvial lobes prograded into a lacustrine basin. Intrastratal, diagenetic alteration of ferromagnesian detrital grains and ferruginous grain coatings led to the red colouration of the Wilgerivier sediments.

Major brazilian gold deposits - 1982 to 1999

USGS Publications Warehouse

Thorman, C.H.; Dewitt, E.; Maron, M.A.; Ladeira, E.A.

2001-01-01

Brazil has been a major but intermittent producer of gold since its discovery in 1500. Brazil led the world in gold production during the 18th and early 19th centuries. From the late 19th century to the late 20th century, total mining company and garimpeiro production was small and relatively constant at about 5 to 8 t/year. The discovery of alluvial deposits in the Amazon by garimpeiros in the 1970s and the opening of eight mines by mining companies from 1983 to 1990 fueled a major boom in Brazil's gold production, exceeding 100 t/year in 1988 and 1989. However, garimpeiro alluvial production decreased 'rapidly in the 1990s, to about 10 t/year by 1999. Company production increased about tenfold from about 4 t/year in 1982 to 40 t in 1992. Production from 1992 to the present remained relatively stable, even though several mines were closed or were in the process of closing and no new major mines were put into production during that period. Based on their production history from 1982-1999, 17 gold mines are ranked as major (> 20 t) and minor (3-8 t) mines. From 1982-1999, deposits hosted in Archean rocks produced 66% of the gold in Brazil, whereas deposits in Paleoproterozoic and Neoproterozoic rocks accounted for 19% and 15%, respectively. Deposits in metamorphosed sedimentary rocks, especially carbonate-rich rocks and carbonate iron-formation, yielded the great bulk of the gold. Deposits in igneous rocks were of much less importance. The Archean and Paleoproterozoic terranes of Brazil largely lack base-metal-rich volcanogenic massive sulfide deposits, porphyry deposits, and polymetallic veins and sedimentary exhalative deposits. An exception to this is in the Caraja??s Mineral Province.

Lithologies of the basement complex (Devonian and older) in the National Petroleum Reserve - Alaska

USGS Publications Warehouse

Dumoulin, Julie A.; Houseknecht, David W.

2001-01-01

Rocks of the basement complex (Devonian and older) were encountered in at least 30 exploratory wells in the northern part of the NPRA. Fine-grained, variably deformed sedimentary rocks deposited in a slope or basinal setting predominate and include varicolored (mainly red and green) argillite in the Simpson area, dark argillite and chert near Barrow, and widespread gray argillite. Chitinozoans of Middle-Late Ordovician and Silurian age occur in the dark argillite and chert unit. Sponge spicules and radiolarians establish a Phanerozoic age for the varicolored and gray argillite units, both of which contain local interbeds of chert-rich sandstone and silt-stone. Conglomerate and sandstone, also chert-rich but interbedded with mudstone and coal and of Early-Middle Devonian age, occur in the Topagoruk area; these strata formed in a fluvial environment. At East Teshekpuk, granite of probable Devonian age was penetrated. Brecciated, quartz-veined rock of uncertain protolith that may be part of the basement complex was encountered in the Ikpikpuk well. Seismic data indicate that angular unconformities truncate all sedimentary units of the basement complex in NPRA. Rocks correlative in age and lithofacies with the dark argillite and chert unit occur in the subsurface near Prudhoe Bay. Other argillite units in NPRA have similarities to basement rocks in the subsurface adjacent to ANWR and the Ordovician-Silurian Iviagik Group at Cape Lisburne, but lack the interbedded limestones found in the ANWR strata, and are less metamorphosed than, and compositionally distinct from, the Iviagik. The Topagoruk conglomerate and the East Teshekpuk granite resemble the Ulungarat formation and the Okpilak batholith, respectively, in the northeastern Brooks Range.

Dating the Barremian-Aptian shallow platform deposits at the eastern part of the Kopet Dagh sedimentary basin, NE Iran

NASA Astrophysics Data System (ADS)

Chenarani, Atefeh; Hosseini, Seyedabolfazl; Vahidi Nia, Mohammad

2016-04-01

The Kopet Dagh sedimentary basin covers the northeastern part of Iran, most parts of Turkmenistan and north of Afghanistan which contains several giant gas fields. The extension of this basin in the Iranian part is around 55km2(Afshar Harb, 1994). The Kopet Dagh basin is marked by having very thick sedimentary rocks and lack of volcanic activity. During the Lower Cretaceous, the Tirgan Formation was deposited in a shallow platform setting and lithologically includes in thick-bedded orbitolinid limestones. This study focuses on the biostratigraphy and age determination of these shallow-water deposits using benthic foraminifera and calcareous green algae. In the studied outcrop, the Tirgan Formation has a thickness of 180 m and includes in limestone beds with some marly intervals. It is overlain by the Sarcheshmeh Formation and rests on the Shurijeh Formation. Both contacts are believed to be transitional and lack of discontinuity. A total of 56 thin-sections were used in this study. This study led to determine 28 genera and 14 species of benthic foraminifera along with 13 genera and 5 species of calcareous green algae. Based on the obtained biostratigraphy data, a late Barremian-early Aptian age is suggested for these deposits. We also defined the precise boundary between the Barremian and Aptian which is reported for the first time from this area. Keywords: Barremian-Aptian, Shallow platform, Kopet Dagh, Iran. Reference: Afshar Harb, A., 1994. Geology of Iran: Geology of the Kopet Dagh. Geological survey of Iran, Report No. 11, 275 pp.

Geologic history of the Neogene “Qena Lake” developed during the evolution of the Nile Valley: A sedimentological, mineralogical and geochemical approach

NASA Astrophysics Data System (ADS)

Philobbos, Emad R.; Essa, Mahmoud A.; Ismail, Mustafa M.

2015-01-01

Siliciclastic and carbonate sediments were laid down in southern Wadi Qena and around the Qena Nile bend (Middle Egypt) in a lacustrine-alluvial environment which dominated a relatively wide lake, the "Qena Lake" that interrupted the Nile course during the Neogene time. These sediments are represented mainly by the oldest dominantly lacustrine chocolate brown mudstones of the Khuzam Formation that accumulated nearer to the center of that lake (now forming a 185 m terrace above sea level), overlain by the dominantly lacustrine carbonates and marls of the Durri Formation which accumulated during semi-arid conditions, mainly nearer to the periphery of the lake (now forming 170, 180 and 185 m terraces a.s.l. in the studied sections). The water level of the "Qena Lake" reached 240 m. above sea level, as indicated by the maximum carbonate elevation reached in the region. Finally fanglomerates of the Higaza Formation with its chert and limestone conglomerates accumulated during torrential periods at higher elevations (forming 240, 300 and 400 m terraces a.s.l.). These three formations accumulated in this particular area before and during the unroofing of the basement rocks of the Eastern Desert, west of the watershed. According to the known Early Miocene initial development of the Nile Valley, beside the occurrence of similar deposits of Oligocene age along the eastern side of the basement range, the earlier known Pliocene age given for these sediments in the Qena area is here questioned. It might belong to earlier Miocene?-Pliocene times. As the basement rocks of the Eastern Desert were still covered by Cretaceous-Paleogene sedimentary rocks while the Khuzam, Durri and Higaza Formations were accumulating in the Qena Lake region, it is believed, contrary to the belief of some authors, that the basement rocks of the Eastern Desert were not the source of these sediments. The carbonate petrographic study, beside the X-ray, and the11 major oxides and 22 trace elements analyses, all point to that the mudrock sediments of the oldest Neogene Khuzam and Durri Formations of the "Qena Lake" phase were carried out and entered the area of southern Wadi Qena and around the Qena Nile bend mainly from the south. The intermediate igneous rocks of southern Egypt and northern Sudan were the main source areas. Additional contributions had possibly come from the weathering of the non-marine to brackish Cretaceous (pre-Campanian) shales of southern Egypt. Accumulation of conglomerates with mixed igneous and sedimentary clasts followed (forming 7 terraces in Wadi Qena, ranging from 240 m in the north to 140 m a.s.l. in the south), constituting the newly introduced Late Pliocene formation; El Heita Formation. These conglomerates were mainly drained from the then exposed basement rocks of the middle parts of Wadi Qena, and cut through the older Neogene sediments. Later on, after the lake became connected to the northern parts of the Nile Valley, the lake water level was lowered to 180 m a.s.l., and another lake with this lower level was formed (Isawiyya Lake). With the successive lowering of water level the younger well known Issawia, Qena, Abbassia and Dandara Formations accumulated successively; nearer to, and within, the present Nile Valley.

The Patagonian Orocline: Paleomagnetic evidence of a large counter-clockwise rotation during the closure of the Rocas Verdes basin.

NASA Astrophysics Data System (ADS)

Poblete, Fernando; Roperch, Pierrick; Herve, Francisco; Ramirez, Cristobal; Arriagada, Cesar

2014-05-01

The southernmost Andes of Patagonia and Tierra del Fuego present a prominent arc-shaped structure, the Patagonian Orocline. Despite the fact that this major structure was already described by Alfred Wegener in his famous textbook in 1929, few paleomagnetic studies have been attempted to describe the rotations associated with the formation of the Patagonian Orocline. In this study we present a paleomagnetic and anisotropy of magnetic susceptibility (AMS) study from more than 130 sites obtained from the Ultima Esperanza region (NS structures at ~51°S) to Península Hardy, south of the Beagle Channel at ~55°S. 45 sites were sampled in early-cretaceous gabbros (gabbro complex), mid-cretaceous tonalites and granodiorites (Canal Beagle group) and Paleocene intrusive rocks (Seno Año Nuevo group) from the South Patagonian batholith, 4 sites from the late Jurassic Hardy formation, a volcanic succession outcropping in Hardy Peninsula and Stewart Island, 9 sites were drilled in the lower cretaceous sedimentary infill of the Rocas Verdes Basin, 3 sites from the Tortuga ophiolite, a quasi-oceanic crust related to the opening of the Rocas Verdes basin. 80 sites were sampled in Cretaceous to Miocene sedimentary rocks from the Magallanes fold and thrust belt and Magallanes Basin. Characteristic Remanent Magnetizations (ChRMs) obtained from the Rocas Verdes Basin tectonic province correspond to secondary magnetizations postdating the early phase of folding. Pyrrhotite is the main magnetic carrier in some of these sites. ChRMs from the South Patagonian Batholith correspond to a primary magnetization. These rocks record about 90° counterclockwise rotations south of the Beagle channel. Few sites from sediments of the Magallanes fold and thrust belt have stable ChRM. The available paleomagnetic results show that no rotation has occurred in the Provincia of Ultima Esperanza (51.5°S), at least, for the last 60 Ma. In the southern part of Provincia de Magallanes and Tierra del Fuego (53°-54.5°S), paleomagnetic results indicate a counterclockwise rotation of ~15° after 60 Ma. AMS results show a good correlation between magnetic lineations and the strikes of structures of the fold and thrust belt except near the Magallanes Fagnano fault zone. On the other hand, the magnetic lineations in both intrusive and sedimentary rocks along the Beagle Channel are mainly vertical suggesting compressive deformation during pluton emplacement at ~90 Ma along the Beagle channel fault. In summary, the formation of the Patagonian Orocline occurred in two stages during a period of convergence and collision of the Antarctic Peninsula with Patagonia. The first stage is associated with large counterclockwise rotations and closure of the Rocas Verdes basin during the late Cretaceous. The second stage corresponds to the formation of the curved, mainly non-rotational Magallanes fold and thrust belt during the Tertiary. Funding for this study was provided by CONICYT Project ACT-105 and CONICYT/IRD scholarships to F. Poblete.

A conceptual review of regional-scale controls on the composition of clastic sediment and the co-evolution of continental blocks and their sedimentary cover.

PubMed

Cox, R; Lowe, D R

1995-01-02

Both sediment recycling and first-cycle input influence the composition of clastic material in sedimentary systems. This paper examines conceptually the roles played by these processes in governing the composition of clastic sediment on a regional scale by outlining the expected effects on sediment composition of protracted sediment recycling and of continuous first-cycle input on a maturing continental block. Generally speaking, long-term recycling tends to enrich sediments in the most chemically and mechanically stable components: quartz in the sand and silt size fractions, and illite among the clay minerals. Sandstones trend towards pure quartz arenites, and mudrocks become more potassic and aluminous. The average grain size of clastic sediment decreases by a combination of progressive attrition of sand grains and ongoing breakdown of primary silicate minerals to finer-grained clay minerals and oxides. Sandstones derived by continuous first-cycle input from an evolving continental crustal source also become increasingly rich in quartz, but in addition become more feldspathic as the proportion of granitic material in the upper continental crust increases during crustal stabilization. Associated mudrocks also become richer in potassium and aluminum, but will have higher K2O/Al2O3 ratios than recycled muds. The average grain size of the sediment may increase with time as the proportion of sand-prone granitic source rocks increases at the expense of more mud-prone volcanic sources. In general, except in instances where chemical weathering is extreme, first-cycle sediments lack the compositional maturity of recycled detritus, and are characterized by the presence of a variety of primary silicate minerals. Sedimentary systems are not usually completely dominated by either recycling or first-cycle detritus. Generally, however, sedimentary systems associated with the earliest phases of formation and accretion of continental crust are characterized by first-cycle input from igneous and metamorphic rocks, whereas those associated with more mature cratons tend to be dominated by recycled sedimentary material.

Archaean greenstone belts of Sierra Leone with comments on the stratigraphy and metallogeny

NASA Astrophysics Data System (ADS)

Umeji, A. C.

Four belts of weakly metamorphosed volcano-sedimentary material, of about 2700 Ma, are enclosed by older granulites, gneisses and migmatites in the eastern part, and (i) a basal ultramafic unit followed by (ii) mafic to feldspathic differentiate and then (iii) a terminal sedimentary formation has been recognized in all the four belts and their average ratio is ultramafic: mafic (greenstone): sedimentary unit (2:5:3). The belts are linear and tightly folded along N-S to NE-SW axis which is also the regional grain of the structures in the older basement complex that engulfs them. Structural and geochronological evidences suggest that the deformation of these volcano-sedimentary supracrustals began during the Liberian tectonism ( c. 2700 Ma) and culminated at the beginning of the Eburnean (2200 Ma). Diapiric rise of K-rich younger Aechaean granites which sharphy trangressed all the earlier rocks and their structural trends, marked the last geotectonic event in the Archaean of this part of West Africa. Chromite cumulate and asbestiform deposits characterize the layered ultramafic unit. whilst gold and associated base metal sulphides which were derived from the volcanic units became hydrothermally concentrated close to the contact between the volcanic units and the overlying sediments, and also in the fault zones. Iron ore deposits are restricted to the sedimentary units where they occur as banded iron formation. It is only in the huge metasedimetary piles of the Sula-Kangari belt that deposits of iron ore occur in commercially viable quantities. The patterns of distribution, deformation and mineralization in these greenstone belts appear to fit closely into island arc model of plate tectonic theory.

Preliminary Geologic Map of the San Fernando 7.5' Quadrangle, Southern California: A Digital Database

USGS Publications Warehouse

Yerkes, R.F.

1997-01-01

The city of San Fernando sits atop a structurally complex, sedimentologically diverse, and tectonically evolving late Tertiary-Quaternary basin situated within the Transverse Ranges of southern California. The surrounding San Fernando Valley (SFV) contains the headwaters of the Los Angeles River and its tributaries. Prior to the advent of flood control, the valley floor was composed of active alluvial fans and floodplains. Seasonal streams emanating from Pacoima and Big Tujunga Canyons drain the complex western San Gabriel Mountains and deposit coarse, highly permeable alluvium that contains generally high-quality ground water. The more shallow western part derives mainly from Tertiary and pre-Tertiary sedimentary rocks, and is underlain by less permeable, fine-grained deposits containing persistent shallow ground water and poorer water quality. Home of the 1971 San Fernando and the 1994 Northridge earthquakes, the SFV experienced near-record levels of strong ground motion in 1994 that caused widespread damage from strong shaking and ground failure. A new map of late Quaternary deposits of the San Fernando area shows that the SFV is a structural trough that has been filled from the sides, with the major source of sediment being large drainages in the San Gabriel Mountains. Deposition on the major alluvial fan of Tujunga Wash and Pacoima Wash, which issues from the San Gabriel Mountains, and on smaller fans, has been influenced by ongoing compressional tectonics in the valley. Late Pleistocene deposits have been cut by active faults and warped over growing folds. Holocene alluvial fans are locally ponded behind active uplifts. The resulting complex pattern of deposits has a major effect on liquefaction hazards. Young sandy sediments generally are highly susceptible to liquefaction where they are saturated, but the distribution of young deposits, their grain size characteristics, and the level of ground water all are complexly dependent on the tectonics of the valley. The San Fernando area lies on the southern slopes of the San Gabriel Mountains. The basement rocks here include high-grade metamorphic rocks of Precambrian age. The mountains are largely composed of crystalline basement that includes the Pelona Scist of probable Mesozoic age that has been overthrust by Precambrian gneisses; the gneisses were subsequently intruded by Mesozoic plutons prior to overthrusting along the latest Cretaceous Vincent thrust. Gneisses of somewhat variable composition and possibly varying ages are found in four terranes, but not all are in contact with Pelona Schist. Large tracts of Precambrian (1.2 billion years old) andesine anorthosite are intrusive into 1.7 billion year-old Mendenhall gneiss, and are found in the western part of the San Gabriels. Mixed with these are younger marble, limestone, and schist of possible Paleozoic age found in association with plutons along the southern margin of the range. The older rocks are intruded by diorite, quartz diorite, and granodiorite of Jurassic age. Also present are siliceous sedimentary rocks of Jurassic age. A thick section of Tertiary sedimentary and volcanic rocks overlie these units. The sediments located south of the San Gabriel Fault are totally different in character from those on the northern range flank, and mostly resemble the western Transverse Ranges due to their deposition in the southeastern Ventura basin; approximately 3,000 m of these sediments are exposed north and west of the city of San Fernando in the Tujunga syncline. Some of the Tertiary rocks are Paleocene and Eocene in age, but the bulk of these rocks are Oligocene and Miocene in age. The Vasquez and Sespe Formations of basal basaltic volcanic and sandstone are Oligocene and lower Miocene in age. These are overlain by clastic rocks of Tick Canyon and Mint Canyon Formations of middle to late Miocene age. Above these rocks are the Castaic, Modelo, and Santa Margarita Formations of fossiliferous marine shale, sand

Nannofossils in 2011 El Hierro eruptive products reinstate plume model for Canary Islands

NASA Astrophysics Data System (ADS)

Zaczek, Kirsten; Troll, Valentin R.; Cachao, Mario; Ferreira, Jorge; Deegan, Frances M.; Carracedo, Juan Carlos; Soler, Vicente; Meade, Fiona C.; Burchardt, Steffi

2015-01-01

The origin and life cycle of ocean islands have been debated since the early days of Geology. In the case of the Canary archipelago, its proximity to the Atlas orogen led to initial fracture-controlled models for island genesis, while later workers cited a Miocene-Quaternary east-west age-progression to support an underlying mantle-plume. The recent discovery of submarine Cretaceous volcanic rocks near the westernmost island of El Hierro now questions this systematic age-progression within the archipelago. If a mantle-plume is indeed responsible for the Canaries, the onshore volcanic age-progression should be complemented by progressively younger pre-island sedimentary strata towards the west, however, direct age constraints for the westernmost pre-island sediments are lacking. Here we report on new age data obtained from calcareous nannofossils in sedimentary xenoliths erupted during the 2011 El Hierro events, which date the sub-island sedimentary rocks to between late Cretaceous and Pliocene in age. This age-range includes substantially younger pre-volcanic sedimentary rocks than the Jurassic to Miocene strata known from the older eastern islands and now reinstate the mantle-plume hypothesis as the most plausible explanation for Canary volcanism. The recently discovered Cretaceous submarine volcanic rocks in the region are, in turn, part of an older, fracture-related tectonic episode.

Nannofossils in 2011 El Hierro eruptive products reinstate plume model for Canary Islands.

PubMed

Zaczek, Kirsten; Troll, Valentin R; Cachao, Mario; Ferreira, Jorge; Deegan, Frances M; Carracedo, Juan Carlos; Soler, Vicente; Meade, Fiona C; Burchardt, Steffi

2015-01-22

The origin and life cycle of ocean islands have been debated since the early days of Geology. In the case of the Canary archipelago, its proximity to the Atlas orogen led to initial fracture-controlled models for island genesis, while later workers cited a Miocene-Quaternary east-west age-progression to support an underlying mantle-plume. The recent discovery of submarine Cretaceous volcanic rocks near the westernmost island of El Hierro now questions this systematic age-progression within the archipelago. If a mantle-plume is indeed responsible for the Canaries, the onshore volcanic age-progression should be complemented by progressively younger pre-island sedimentary strata towards the west, however, direct age constraints for the westernmost pre-island sediments are lacking. Here we report on new age data obtained from calcareous nannofossils in sedimentary xenoliths erupted during the 2011 El Hierro events, which date the sub-island sedimentary rocks to between late Cretaceous and Pliocene in age. This age-range includes substantially younger pre-volcanic sedimentary rocks than the Jurassic to Miocene strata known from the older eastern islands and now reinstate the mantle-plume hypothesis as the most plausible explanation for Canary volcanism. The recently discovered Cretaceous submarine volcanic rocks in the region are, in turn, part of an older, fracture-related tectonic episode.

Miocene exhumation of the Indus-Yarlung Suture Zone in NW India: An insight into the controls of tectonics and climate

NASA Astrophysics Data System (ADS)

Bhattacharya, G.; Robinson, D. M.; Orme, D. A.; Olree, E.; Bosu, S.

2016-12-01

Detritus from the India-Asia collision and subsequent Cenozoic tectonic events is preserved in sedimentary basins along the 2500 km long Indus-Yarlung Suture Zone (IYSZ) in India and Tibet. In northwest India, these Eocene-Miocene synorogenic sedimentary rocks are preserved in the Tar and Indus Groups. We use (U-Th)/He dating of detrital zircons from units within these sedimentary basins, including the Temesgam Formation at Temesgam, the Lower Nimu Formation and the Sumdo Formation in the Zanskar Gorge, and the Artsa Formation and the Miru Formation in the Upshi-Lato region. These analyses indicate a phase of rapid exhumation from 19-8 Ma. Possible explanations for these data include a combination of tectonic events and the influence of climate. Regional back-thrusting initiated at 20 Ma along the Great Counter Thrust, which buried the IYSZ footwall with the Lamayuru slope deposits of the Indian passive margin. In south Tibet, previous studies identify underthrusting of the Indian plate as a key factor for basin exhumation in the IYSZ, which may also be a driver in northwest India. The flow of the paleo-Indus river through the IYSZ in Early Miocene time might have been triggered by the onset of Asian monsoon at 24 Ma and its intensification between 18-10 Ma. Our data demonstrate a phase of rapid exhumation in northwest India from 19-8 Ma, which may be linked to all of these tectonic and climate influences. Data in this study are similar to the data of Carrapa et al. (2014) from south Tibet that show peak exhumation at 17 Ma, and suggest that a regional cooling episode, driven by tectonics and climate, might have prevailed in the Miocene along the IYSZ.

Altitude of the Top of the Deadwood Formation in the Black Hills area, South Dakota, 1999

USGS Publications Warehouse

Carter, Janet M.; Redden, Jack A.

2000-01-01

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers).The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and artesian springs that originate from confined aquifers are common around the periphery of the Black Hills.The purpose of this map is to show the altitude of the top (structure contours) of the Deadwood Formation within the area of the Black Hills Hydrology Study. The depth to the top of the Deadwood Formation can be estimated at a specific site by subtracting the altitude of the top of the formation from the topographic elevation, However, caution is urged in determining the depth to the top of the formation in areas on the map where the contours are approximately located.

Altitude of the Top of the Minnelusa Formation in the Black Hills area, South Dakota, 1999

USGS Publications Warehouse

Carter, Janet M.; Redden, Jack A.

2000-01-01

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers).The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and artesian springs that originate from confined aquifers are common around the periphery of the Black Hills.The purpose of this map is to show the altitude of the top (structure contours) of the Minnelusa Formation within the area of the Black Hills Hydrology Study. The depth to the top of the Minnelusa Formation can be estimated at a specific site by subtracting the altitude of the top of the formation from the topographic elevation. However, caution is urged in determining the depth to the top of the formation in areas on the map where the contours are approximately located.

Archean upper crust transition from mafic to felsic marks the onset of plate tectonics.

PubMed

Tang, Ming; Chen, Kang; Rudnick, Roberta L

2016-01-22

The Archean Eon witnessed the production of early continental crust, the emergence of life, and fundamental changes to the atmosphere. The nature of the first continental crust, which was the interface between the surface and deep Earth, has been obscured by the weathering, erosion, and tectonism that followed its formation. We used Ni/Co and Cr/Zn ratios in Archean terrigenous sedimentary rocks and Archean igneous/metaigneous rocks to track the bulk MgO composition of the Archean upper continental crust. This crust evolved from a highly mafic bulk composition before 3.0 billion years ago to a felsic bulk composition by 2.5 billion years ago. This compositional change was attended by a fivefold increase in the mass of the upper continental crust due to addition of granitic rocks, suggesting the onset of global plate tectonics at ~3.0 billion years ago. Copyright © 2016, American Association for the Advancement of Science.

Plant taphonomy in incised valleys: Implications for interpreting paleoclimate from fossil plants

USGS Publications Warehouse

Demko, T.M.; Dubiel, R.F.; Parrish, Judith T.

1998-01-01

Paleoclimatic interpretations of the Upper Triassic Chinle Formation (Colorado Plateau) based on plants conflict with those based on the sedimentary rocks. The plants are suggestive of a humid, equable climate, whereas the rocks are more consistent with deposition under highly seasonal precipitation and ground-water conditions. Fossil plant assemblages are limited to the lower members of the Chinle Formation, which were deposited within incised valleys that were cut into underlying Lower to Middle Triassic and older rocks. In contrast, the upper members of the formation, which were deposited across the fluvial plain after the incised valleys were filled, have few preserved fossil plants. The taphonomic characteristics of the plant fossil assemblages, within the stratigraphic and hydrologic context of the incised valley-fill sequence, explain the vertical and lateral distribution of these assemblages. The depositional, hydrological, and near-surface geochemical conditions were more conducive to preservation of the plants. Fossil plant assemblages in fully terrestrial incised-valley fills should be taphonomically biased toward riparian wetland environments. If those assemblages are used to interpret paleoclimate, the paleoclimatic interpretations will also be biased. The bias may be particularly strong in climates such as those during deposition of the Chinle Formation, when the riparian wetlands may reflect local hydrologic conditions rather than regional climate, and should be taken into account when using these types of plant assemblages in paleoclimatic interpretations.

Integrated approaches to terminal Proterozoic stratigraphy: an example from the Olenek Uplift, northeastern Siberia

NASA Technical Reports Server (NTRS)

Knoll, A. H.; Grotzinger, J. P.; Kaufman, A. J.; Kolosov, P.

1995-01-01

In the Olenek Uplift of northeastern Siberia, the Khorbusuonka Group and overlying Kessyusa and Erkeket formations preserve a significant record of terminal Proterozoic and basal Cambrian Earth history. A composite section more than 350 m thick is reconstructed from numerous exposures along the Khorbusuonka River. The Khorbusuonka Group comprises three principal sedimentary sequences: peritidal dolomites of the Mastakh Formation, which are bounded above and below by red beds; the Khatyspyt and most of the overlying Turkut formations, which shallow upward from relatively deep-water carbonaceous micrites to cross-bedded dolomitic grainstones and stromatolites; and a thin upper Turkut sequence bounded by karst surfaces. The overlying Kessyusa Formation is bounded above and below by erosional surfaces and contains additional parasequence boundaries internally. Ediacaran metazoans, simple trace fossils, and vendotaenids occur in the Khatyspyt Formation; small shelly fossils, more complex trace fossils, and acritarchs all appear near the base of the Kessyusa Formation and diversify upward. The carbon-isotopic composition of carbonates varies stratigraphically in a pattern comparable to that determined for other terminal Proterozoic and basal Cambrian successions. In concert, litho-, bio-, and chemostratigraphic data indicate the importance of the Khorbusuonka Group in the global correlation of terminal Proterozoic sedimentary rocks. Stratigraphic data and a recently determined radiometric date on basal Kessyusa volcanic breccias further underscore the significance of the Olenek region in investigations of the Proterozoic-cambrian boundary.

Integrated approaches to terminal Proterozoic stratigraphy: an example from the Olenek Uplift, northeastern Siberia.

PubMed

Knoll, A H; Grotzinger, J P; Kaufman, A J; Kolosov, P

1995-01-01

In the Olenek Uplift of northeastern Siberia, the Khorbusuonka Group and overlying Kessyusa and Erkeket formations preserve a significant record of terminal Proterozoic and basal Cambrian Earth history. A composite section more than 350 m thick is reconstructed from numerous exposures along the Khorbusuonka River. The Khorbusuonka Group comprises three principal sedimentary sequences: peritidal dolomites of the Mastakh Formation, which are bounded above and below by red beds; the Khatyspyt and most of the overlying Turkut formations, which shallow upward from relatively deep-water carbonaceous micrites to cross-bedded dolomitic grainstones and stromatolites; and a thin upper Turkut sequence bounded by karst surfaces. The overlying Kessyusa Formation is bounded above and below by erosional surfaces and contains additional parasequence boundaries internally. Ediacaran metazoans, simple trace fossils, and vendotaenids occur in the Khatyspyt Formation; small shelly fossils, more complex trace fossils, and acritarchs all appear near the base of the Kessyusa Formation and diversify upward. The carbon-isotopic composition of carbonates varies stratigraphically in a pattern comparable to that determined for other terminal Proterozoic and basal Cambrian successions. In concert, litho-, bio-, and chemostratigraphic data indicate the importance of the Khorbusuonka Group in the global correlation of terminal Proterozoic sedimentary rocks. Stratigraphic data and a recently determined radiometric date on basal Kessyusa volcanic breccias further underscore the significance of the Olenek region in investigations of the Proterozoic-cambrian boundary.

Geochronologic and geochemical data from Mesozoic rocks in the Black Mountain area northeast of Victorville, San Bernardino County, California

USGS Publications Warehouse

Stone, Paul; Barth, Andrew P.; Wooden, Joseph L.; Fohey-Breting, Nicole K.; Vazquez, Jorge A.; Priest, Susan S.

2013-01-01

We present geochronologic and geochemical data for Mesozoic rocks in the Black Mountain area northeast of Victorville, California, to supplement previous geologic mapping. These data, together with previously published results, limit the depositional age of the sedimentary Fairview Valley Formation to Early Jurassic, refine the ages and chemical compositions of selected units in the overlying Jurassic Sidewinder Volcanics and of related intrusive units, and limit the age of some post-Sidewinder faulting in the Black Mountain area to a brief interval in the Late Jurassic. The new information contributes to a more complete understanding of the Mesozoic magmatic and tectonic evolution of the western Mojave Desert and surrounding regions.

Glendonites in Neoproterozoic low-latitude, interglacial, sedimentary rocks, northwest Canada: Insights into the Cryogenian ocean and Precambrian cold-water carbonates

NASA Astrophysics Data System (ADS)

James, Noel P.; Narbonne, Guy M.; Dalrymple, Robert W.; Kurtis Kyser, T.

2005-01-01

Stellate crystals of ferroan dolomite in neritic siliciclastic and carbonate sedimentary rocks between Sturtian and Marinoan glaciations in the Mackenzie Mountains are interpreted as replaced glendonites. These pseudomorphs after ikaite indicate that shallow seawater at that time was near freezing. Stromatolites verify that paleoenvironments were in the photic zone and physical sedimentary structures such as hummocky cross-bedding confirm that the seafloor was repeatedly disturbed by storms. Glendonites within these low-latitude, continental shelf to coastal sedimentary deposits imply that global ocean water during much of Cryogenian time was likely very cold. Such an ocean would easily have cooled to yield widespread sea ice and, through positive feedback, growth of low-latitude continental glaciers. In this situation gas hydrates could have formed in shallow-water, cold shelf sediment, but would have been particularly sensitive to destabilization as a result of sea-level change. Co-occurrence of pisolites and glendonites in these rocks additionally implies that some ooids and pisoids might have been, unlike Phanerozoic equivalents, characteristic of cold-water sediments.

Diverse microbially induced sedimentary structures from 1 Ga lakes of the Diabaig Formation, Torridon Group, northwest Scotland

NASA Astrophysics Data System (ADS)

Callow, Richard H. T.; Battison, Leila; Brasier, Martin D.

2011-08-01

The siliciclastic lacustrine rocks of the ~ 1000 Ma Diabaig Formation, northwest Scotland, contain a remarkable diversity of macroscopic structures on bedding planes that can be compared with various kinds of microbially induced sedimentary structures (MISS). Field sedimentological investigations, combined with laboratory analysis of bedding planes and petrographic study of thin sections have allowed us to characterise a range of depositional environments and document the spectrum of biological structures. MISS are reported from frequently subaerial environments, through commonly submerged facies, and down to permanently sub-wavebase settings. Palaeoenvironmental conditions (water depth, exposure, hydrodynamic energy) control the distribution of MISS within these facies. This demonstrates that mat-forming microbial communities were arguably well adapted to low light levels or periodic exposure. Some MISS from the Diabaig Formation are typical of Precambrian microbial mats, including reticulate fabrics and 'old elephant skin' textures. In addition to these, a number of new and unusual fabrics of putative microbial origin are described, including linear arrays of ridges and grooves (cf. 'Arumberia') and discoidal structures that are comparable with younger Ediacaran fossils such as Beltanelliformis. These observations indicate that benthic microbial ecosystems were thriving in freshwater lake systems ~ 1000 Ma, and indicate how microbially induced sedimentary structures may be applied as facies indicators for Proterozoic lacustrine environments. The discovery of structures closely resembling Ediacaran fossils (cf. Beltanelliformis) also serves to highlight the difficulty of interpreting simple discoidal bedding plane structures as metazoan fossils.

Biofacies expression of Upper Cretaceous sequences in the Rock Springs uplift

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Y.Y.; Pflum, C.E.; Wright, R.C.

1991-03-01

The sequence-stratigraphic framework and vertical succession of depositional environments in the Upper Cretaceous section of the Rock Springs uplift is expressed in the biofacies patterns as well as in the stratal stacking patterns. Vertical trends in six biofacies parameters track affinities to marine and nonmarine environments as well as proximity to the paleoshoreline. These six parameters and their environmental significance include the relative proportion of herbaceous kerogen (land-derived), amorphous kerogen (marine), dinoflagellates (marine), bisaccate pollen (land-derived but buoyant and easily transported offshore), and the abundance and diversity of benthic foraminifera (both increase offshore). Shoaling marine environments are characterized by anmore » increasing proportion of herbaceous kerogen and decreasing proportions of amorphous kerogen, dinoflagellated, bisaccates, and the abundance and diversity of benthic foraminifera. Conversely, a deepening-upward marine sedimentary succession is characterized by an opposite trend in these parameters. A synthesis of the six biofacies parameters emphasizes the third-order cyclicity of the stratal succession as reflected in the well-developed third-order downlap surfaces and condensed sections. The biofacies trends indicate the transgressive nature of the lower Rock Springs and lower Lewis formations, and the progradational nature of the upper arts of the Baxter, Blair, and Rock Springs formations. An overall progradational (i.e., shoaling) character is exhibited in the three lower sequences (Baxter through Rock Springs) by the progressively decreasing abundance of amorphous kerogen, dinoflagellates, and foraminifera.« less

Mineralogy of Rocks and Sediments at Gale Crater, Mars

NASA Astrophysics Data System (ADS)

Achilles, Cherie; Downs, Robert; Blake, David; Vaniman, David; Ming, Doug; Rampe, Elizabeth; Morris, Dick; Morrison, Shaunna; Treiman, Allan; Chipera, Steve; Yen, Albert; Bristow, Thomas; Craig, Patricia; Hazen, Robert; Crisp, Joy; Grotzinger, John; Des Marias, David; Farmer, Jack; Sarrazin, Philippe; Morookian, John Michael

2017-04-01

The Mars Science Laboratory rover, Curiosity, is providing in situ mineralogical, geochemical, and sedimentological assessments of rocks and soils in Gale crater. Since landing in 2012, Curiosity has traveled over 15 km, providing analyses of mudstones and sandstones to build a stratigraphic history of the region. The CheMin X-ray diffraction (XRD) instrument is the first instrument on Mars to provide quantitative mineralogical analyses of drilled powders and scooped sediment based on X-ray crystallography. CheMin identifies and determines mineral abundances and unit-cell parameters of major crystalline phases, and identifies minor phases at abundances >1 wt%. In conjunction with elemental analyses, CheMin-derived crystal chemistry allows for the first calculations of crystalline and amorphous material compositions. These mineralogy, crystal chemistry, and amorphous chemistry datasets are playing central roles in the characterization of Gale crater paleoenvironments. CheMin has analyzed 17 rock and sediment samples. In the first phase of the mission, Curiosity explored the sedimentary units of Aeolis Palus (Bradbury group), including two mudstones from Yellowknife Bay. CheMin analyses of the Yellowknife Bay mudstones identified clay minerals among an overall basaltic mineral assemblage. These mineralogical results, along with imaging and geochemical analyses, were used to characterize an ancient lacustrine setting that is thought to have once been a habitable environment. Following the investigations of the Bradbury group, Curiosity arrived at the lower reaches of Aeolis Mons, commonly called Mt. Sharp. A strategic sample campaign was initiated, drilling bedrock at <25 m elevation intervals in order to compile a comprehensive stratigraphic column of Mt. Sharp sedimentary units. Two formations have been sampled thus far, the lower-most Murray formation and the Stimson formation, which lies unconformably over the Murray. The Stimson formation is a cross-bedded sandstone interpreted as ancient, lithified eolian dunes. The mineralogy of this sandstone is dominated by plagioclase, pyroxene, magnetite and X-ray amorphous phases. Adjacent to fractures, light-toned, halo-like zones are thought to result from significant aqueous alteration of the primary sandstone and show decreased abundances of feldspar and pyroxene, and an increase in the amorphous component, specifically high-silica phases. The Murray formation is the most sampled stratigraphic unit in Gale crater. Composed mainly of finely laminated mudstones and interpreted as lacustrine deposits, the mineralogy of Murray rocks reveals a complex aqueous history. Within the lower Murray strata, CheMin identified clay minerals, crystalline and amorphous silica, hematite, magnetite, and jarosite. The mineralogy suggests a paleolake that experienced variable redox conditions and sediment influx from multiple sources. Younger Murray strata have high abundances of clay minerals, hematite, and calcium sulfate but show lower variability in mineralogy compared to the older bedforms. CheMin's identification of tridymite in one of the Murray mudstone samples led to the first in situ identification of silicic volcanism on Mars. This presentation will discuss the mineralogy of sedimentary samples analyzed by CheMin and how these data are used to characterize the depositional and diagenetic environment of Gale crater's long-lived lake system.

Remagnetization of the Coast Range ophiolite at Stanley Mountain, California, during accretion near 10°N paleolatitude

NASA Astrophysics Data System (ADS)

Hagstrum, Jonathan T.

1992-06-01

Paleomagnetic data are presented for a 50-m-thick sequence of Oxfordian to Tithonian sedimentary rocks conformably overlying Upper Jurassic pillow basalt within the Coast Range ophiolite at Stanley Mountain, California. These new data are similar in direction and polarity to previously published paleomagnetic data for the pillow basalt. The Jurassic sedimentary rocks were deposited during a mixed-polarity interval of the geomagnetic field, and uniformity of the remanent magnetization within the entire section of pillow basalt and sedimentary rocks indicates later remagnetization. Remagnetization of the Coast Range ophiolite is interpreted to have occurred during accretion to the continental margin, possibly by burial and low-temperature alteration related to this event. Similar paleolatitudes calculated for the ophiolite (11° ±3°) and for mid-Cretaceous sedimentary rocks of the Stanley Mountain terrane at Figueroa Mountain (6° ±5°) are consistent with remagnetization of the ophiolite at low paleo-latitudes. Uniform-polarity directions for other remnants of ophiolite in southern California and elsewhere along the Pacific coast imply that these rocks were also overprinted, and their magnetic inclinations suggest remagnetization at low paleolatitudes as well. The Coast Range ophiolite at Stanley Mountain is thus inferred to have been remagnetized along the North American margin near 10°N paleolatitude between earliest and mid-Cretaceous time and subsequently transported northward by strike-slip faulting related to relative motions between the Farallon, Kula, Pacific, and North American plates.

Remagnetization of the Coast Range ophiolite at Stanley Mountain, California, during accretion near 10°N paleolatitude

USGS Publications Warehouse

Hagstrum, Jonathan T.

1992-01-01

Paleomagnetic data are presented for a 50-m-thick sequence of Oxfordian to Tithonian sedimentary rocks conformably overlying Upper Jurassic pillow basalt within the Coast Range ophiolite at Stanley Mountain, California. These new data are similar in direction and polarity to previously published paleomagnetic data for the pillow basalt. The Jurassic sedimentary rocks were deposited during a mixed-polarity interval of the geomagnetic field, and uniformity of the remanent magnetization within the entire section of pillow basalt and sedimentary rocks indicates later remagnetization. Remagnetization of the Coast Range ophiolite is interpreted to have occurred during accretion to the continental margin, possibly by burial and low-temperature alteration related to this event. Similar paleolatitudes calculated for the ophiolite (11° ±3°) and for mid-Cretaceous sedimentary rocks of the Stanley Mountain terrane at Figueroa Mountain (6° ±5°) are consistent with remagnetization of the ophiolite at low paleo-latitudes. Uniform-polarity directions for other remnants of ophiolite in southern California and elsewhere along the Pacific coast imply that these rocks were also overprinted, and their magnetic inclinations suggest remagnetization at low paleolatitudes as well. The Coast Range ophiolite at Stanley Mountain is thus inferred to have been remagnetized along the North American margin near 10°N paleolatitude between earliest and mid-Cretaceous time and subsequently transported northward by strike-slip faulting related to relative motions between the Farallon, Kula, Pacific, and North American plates.

Geology and origin of the late Proterozoic Darb Zubaydah ophiolite, Kingdom of Saudi Arabia

USGS Publications Warehouse

Quick, J.E.

1990-01-01

The Darb Zubaydah ophiolite, north-central Arabian Shield, preserves a largely intact section consisting of ultramafic rocks, gabbro, diabase, granodiorite, and interbedded volcanic and sedimentary rocks. Formation of these rocks within or near an island arc is indicated by the absence of pelagic sediments and the abundance of pillow basalt, turbiditic sediments, lahar deposits, and basaltic to rhyolitic tuff. The oldest extrusive rocks formed in a young, relatively unevolved island arc or in a back-arc basin sufficiently close to an arc to receive calc-alkaline lava flows and coarse-grained, arc-derived detritus. Overlying turbidites and lahar deposits of the Kaffan sandstone point to the initiation of a rifting event. High-Ti basalts, which erupted above the Kaffan sandstone, and related diabase are interpreted to be magmatic products of incipient intra-arc rifting. Renewed arc volcanism produced calc-alkaline volcanic rocks that interfingered with the high-Ti basalt and later dominated the section as the volcanic apron of the arc prograded basinward. Extrusion of voluminous calc-alkaline tuff may have been contemporaneous with intrusion of granodiorite and gravity-driven landsliding. -from Author

Geologic constraints on the macroevolutionary history of marine animals

PubMed Central

Peters, Shanan E.

2005-01-01

The causes of mass extinctions and the nature of taxonomic radiations are central questions in paleobiology. Several episodes of taxonomic turnover in the fossil record, particularly the major mass extinctions, are generally thought to transcend known biases in the geologic record and are widely interpreted as distinct macroevolutionary phenomena that require unique forcing mechanisms. Here, by using a previously undescribed compilation of the durations of sedimentary rock sequences, I compare the rates of expansion and truncation of preserved marine sedimentary basins to rates of origination and extinction among Phanerozoic marine animal genera. Many features of the highly variable record of taxonomic first and last occurrences in the marine animal fossil record, including the major mass extinctions, the frequency distribution of genus longevities, and short- and long-term patterns of genus diversity, can be predicted on the basis of the temporal continuity and quantity of preserved sedimentary rock. Although these results suggest that geologically mediated sampling biases have distorted macroevolutionary patterns in the fossil record, preservation biases alone cannot easily explain the extent to which the sedimentary record duplicates paleobiological patterns. Instead, these results suggest that the processes responsible for producing variability in the sedimentary rock record, such as plate tectonics and sea-level change, may have been dominant and consistent macroevolutionary forces throughout the Phanerozoic. PMID:16105949

Early Tertiary Anaconda metamorphic core complex, southwestern Montana

USGS Publications Warehouse

O'Neill, J. M.; Lonn, J.D.; Lageson, D.R.; Kunk, Michael J.

2004-01-01

A sinuous zone of gently southeast-dipping low-angle Tertiary normal faults is exposed for 100 km along the eastern margins of the Anaconda and Flint Creek ranges in southwest Montana. Faults in the zone variously place Mesoproterozoic through Paleozoic sedimentary rocks on younger Tertiary granitic rocks or on sedimentary rocks older than the overlying detached rocks. Lower plate rocks are lineated and mylonitic at the main fault and, below the mylonitic front, are cut by mylonitic mesoscopic to microscopic shear zones. The upper plate consists of an imbricate stack of younger-on-older sedimentary rocks that are locally mylonitic at the main, lowermost detachment fault but are characteristically strongly brecciated or broken. Kinematic indicators in the lineated mylonite indicate tectonic transport to the east-southeast. Syntectonic sedimentary breccia and coarse conglomerate derived solely from upper plate rocks were deposited locally on top of hanging-wall rocks in low-lying areas between fault blocks and breccia zones. Muscovite occurs locally as mica fish in mylonitic quartzites at or near the main detachment. The 40Ar/39Ar age spectrum obtained from muscovite in one mylonitic quartzite yielded an age of 47.2 + 0.14 Ma, interpreted to be the age of mylonitization. The fault zone is interpreted as a detachment fault that bounds a metamorphic core complex, here termed the Anaconda metamorphic core complex, similar in age and character to the Bitterroot mylonite that bounds the Bitterroot metamorphic core complex along the Idaho-Montana state line 100 km to the west. The Bitterroot and Anaconda core complexes are likely components of a continuous, tectonically integrated system. Recognition of this core complex expands the region of known early Tertiary brittle-ductile crustal extension eastward into areas of profound Late Cretaceous contractile deformation characterized by complex structural interactions between the overthrust belt and Laramide basement uplifts, overprinted by late Tertiary Basin and Range faulting. ?? 2004 NRC Canada.

Influence of rock strength variations on interpretation of thermochronologic data

NASA Astrophysics Data System (ADS)

Flowers, Rebecca; Ehlers, Todd

2017-04-01

Low temperature thermochronologic datasets are the primary means for estimating the timing, magnitude, and rates of erosion over extended (10s to 100s of Ma) timescales. Typically, abrupt shifts in cooling rates recorded by thermochronologic data are interpreted as changes in erosion rates caused by shifts in uplift rates, drainage patterns, or climate. However, recent work shows that different rock types vary in strength and erodibility by as much as several orders of magnitude, therefore implying that lithology should be an important control on how landscapes change through time and the thermochronometer record of erosion histories. Attention in the surface processes community has begun to focus on rock strength as a critical control on short-term (Ka to Ma) landscape evolution, but there has been less consideration of the influence of this factor on landscapes over longer intervals. If intrinsic lithologic variability can strongly modify erosion rates without changes in external factors, this result would have important implications for how thermochronologic datasets are interpreted. Here we evaluate the importance of rock strength for interpreting thermochronologic datasets by examining erosion rates and total denudation magnitudes across sedimentary rock-crystalline basement rock interfaces. We particularly focus on the 'Great Unconformity', a global stratigraphic surface between Phanerozoic sedimentary rocks and Precambrian crystalline basement, which based on rock strength studies marks a dramatic rock erodibility contrast across which erosion rates should decelerate. In the Rocky Mountain basement uplifts of the western U.S., thermochronologic data and geologic observations indicate that erosion rates were high during latest Cretaceous-early Tertiary denudation of the sedimentary cover (3-4 km over 10 m.y., 300-400 m/m.y.) but dramatically decelerated when less erodible basement rocks were encountered (0.1-0.5 km over 55 m.y., 2-9 m/m.y.). Similarly, the western Canadian shield underwent multiple Phanerozoic episodes of substantial (1-4 km) sedimentary rock burial and erosion, but total Phanerozoic erosion of the crystalline basement below the Great Unconformity was no more than a few hundred meters. We use published low temperature thermochronologic dates, the LandLab landscape evolution model, and 1D thermokinematic and erosion (Pecube) models to assess whether the observed deceleration of erosion can be explained by measured variations in rock strength alone. We use these results to consider the extent to which rock strength can change the cooling history recorded by thermochronologic datasets.

Controls on development and diversity of Early Archean stromatolites

PubMed Central

Allwood, Abigail C.; Grotzinger, John P.; Knoll, Andrew H.; Burch, Ian W.; Anderson, Mark S.; Coleman, Max L.; Kanik, Isik

2009-01-01

The ≈3,450-million-year-old Strelley Pool Formation in Western Australia contains a reef-like assembly of laminated sedimentary accretion structures (stromatolites) that have macroscale characteristics suggestive of biological influence. However, direct microscale evidence of biology—namely, organic microbial remains or biosedimentary fabrics—has to date eluded discovery in the extensively-recrystallized rocks. Recently-identified outcrops with relatively good textural preservation record microscale evidence of primary sedimentary processes, including some that indicate probable microbial mat formation. Furthermore, we find relict fabrics and organic layers that covary with stromatolite morphology, linking morphologic diversity to changes in sedimentation, seafloor mineral precipitation, and inferred microbial mat development. Thus, the most direct and compelling signatures of life in the Strelley Pool Formation are those observed at the microscopic scale. By examining spatiotemporal changes in microscale characteristics it is possible not only to recognize the presence of probable microbial mats during stromatolite development, but also to infer aspects of the biological inputs to stromatolite morphogenesis. The persistence of an inferred biological signal through changing environmental circumstances and stromatolite types indicates that benthic microbial populations adapted to shifting environmental conditions in early oceans. PMID:19515817

Potential MER Landing Site in Melas Chasma

NASA Technical Reports Server (NTRS)

Weitz, C. M.; Parker, Timothy J.; Anderson, F. Scott

2001-01-01

We have selected one area in Valles Marineris as a potential landing site for the Mars Exploration Rover (MER) mission. After 30 years of analyses, the formation of the Valles Marineris system of troughs and its associated deposits still remains an enigma. Understanding all aspects of the Valles Marineris would significantly contribute to deciphering the internal and external history of Mars. A landing site within Melas Chasma could provide insight into both the formation of Valles Marineris and the composition and origin of the interior layered deposits (ILDs). The ILDs have been proposed as: (1) sedimentary deposits formed in lakes mass wasted material from the walls; (3) remnants of the wall rock; (4) carbonate deposits; (5) aeolian deposits; and (6) volcanic. More recently, Malin and Edgett suggest that the fine-scale, rhythmic layering seen in the interior deposits, as well as other layered deposits in craters, supports a sedimentary origin. Because an understanding of the formation of Valles Marineris and its interior deposits is so important to deciphering the history of Mars, we have proposed a landing site for the MER mission on an exposure of interior deposits in western Melas Chasma. Either MER-A and MER-B could land at this same location.

Rock Slope Design Criteria : Executive Summary Report

DOT National Transportation Integrated Search

2010-06-01

Based on the stratigraphy and the type of slope stability problems, the flat lying, Paleozoic age, sedimentary rocks of Ohio were divided into three design units: 1) competent rock design unit consisting of sandstones, limestones, and siltstones that...

Geologic framework of oil and gas genesis in main sedimentary basins from Romania Oprea Dicea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ionescu, N.; Morariu, C.D.

1991-03-01

Oil and gas fields located in Moldavic nappes are encompassed in Oligocene and lower Miocene formations, mostly in the marginal folds nappe, where Kliwa Sandstone sequences have high porosity, and in the Black Sea Plateau. The origin of the hydrocarbon accumulations from the Carpathian foredeep seems to be connected to the Oligocene-lower Miocene bituminous formations of the marginal folds and sub-Carpathian nappes. In the Gethic depression, the hydrocarbon accumulations originate in Oligocene and Miocene source rocks and host in structural, stratigraphical, and lithological traps. The accumulations connected with tectonic lines that outline the areal extension of the Oligocene, Miocene, andmore » Pliocene formations are in the underthrusted Moesian platform. The hydrocarbon accumulations related to the Carpathian foreland represent about 40% of all known accumulations in Romania. Most of them are located in the Moesian platform. In this unit, the oil and gas fields present a vertical distribution at different stratigraphic levels, from paleozoic to Neogene, and in all types of reservoirs, suggesting multicycles of oleogenesis, migration, accumulation, and sealing conditions. The hydrocarbon deposits known so far on the Black Sea continental plateau are confined in the Albian, Cenomanian, Turonian-Senonian, and Eocene formations. The traps are of complex type structural, lithologic, and stratigraphic. The reservoirs are sandstones, calcareous sandstones, limestones, and sands. The hydrocarbon source rocks are pelitic and siltic Oligocene formations. Other older source rocks are probably Cretaceous.« less

Empirical relations of rock properties of outcrop and core samples from the Northwest German Basin for geothermal drilling

NASA Astrophysics Data System (ADS)

Reyer, D.; Philipp, S. L.

2014-09-01

Information about geomechanical and physical rock properties, particularly uniaxial compressive strength (UCS), are needed for geomechanical model development and updating with logging-while-drilling methods to minimise costs and risks of the drilling process. The following parameters with importance at different stages of geothermal exploitation and drilling are presented for typical sedimentary and volcanic rocks of the Northwest German Basin (NWGB): physical (P wave velocities, porosity, and bulk and grain density) and geomechanical parameters (UCS, static Young's modulus, destruction work and indirect tensile strength both perpendicular and parallel to bedding) for 35 rock samples from quarries and 14 core samples of sandstones and carbonate rocks. With regression analyses (linear- and non-linear) empirical relations are developed to predict UCS values from all other parameters. Analyses focus on sedimentary rocks and were repeated separately for clastic rock samples or carbonate rock samples as well as for outcrop samples or core samples. Empirical relations have high statistical significance for Young's modulus, tensile strength and destruction work; for physical properties, there is a wider scatter of data and prediction of UCS is less precise. For most relations, properties of core samples plot within the scatter of outcrop samples and lie within the 90% prediction bands of developed regression functions. The results indicate the applicability of empirical relations that are based on outcrop data on questions related to drilling operations when the database contains a sufficient number of samples with varying rock properties. The presented equations may help to predict UCS values for sedimentary rocks at depth, and thus develop suitable geomechanical models for the adaptation of the drilling strategy on rock mechanical conditions in the NWGB.

Tracing Archean sulfur across stitched lithospheric blocks

NASA Astrophysics Data System (ADS)

LaFlamme, Crystal; Fiorentini, Marco; Lindsay, Mark; Wing, Boswell; Selvaraja, Vikraman; Occhipinti, Sandra; Johnson, Simon; Bui, Hao Thi

2017-04-01

Craton margins are loci for volatile exchange among lithospheric geochemical reservoirs during crust formation processes. Here, we seek to revolutionise the current understanding of the planetary flux and lithospheric transfer of volatiles during supercontinent formation by tracing sulfur from the atmosphere-hydrosphere through to the lithosphere during crust formation. To do so, we trace the transfer of sulfur by following mass independently fractionated sulfur at ancient tectonic boundaries has the potential to. Mass independent fractionation of sulfur (MIF-S) is a signature (quantified as Δ33S and Δ36S) that is unique to the Archean sedimentary rock record and imparted to sulfur reservoirs that interacted with the oxygen-poor atmosphere before the Great Oxidation Event (GOE) at ca. 2.4 Ga. Here we present multiple sulfur isotopes from across a Proterozoic post-GOE orogenic belt, formed when Archean cratons were stitched together during supercontinent amalgamation. For the first time, multiple sulfur isotope data are presented spatially to elucidate volatile pathways across lithospheric blocks. Across the orogenic belt, the Proterozoic granitoid and hydrothermal rock records proximal to Archean cratons preserve values of Δ33S up to +0.8\\permil and a Δ33S-Δ36S array of -1.2, whereas magmatic and hydrothermal systems located more distally from the margin do not display any evidence of MIF-S. This is the first study to identify MIF-S in a Proterozoic orogen indicates that tectonic processes controlling lithospheric evolution and crust formation at tectonic boundaries are able to transfer sulfur from Archean supracrustal rock reservoirs to newly formed Proterozoic granitoid crust. The observation of MIF-S in the Proterozoic granitoid rock record has the potential to revolutionise our understanding of secular changes in the evolution of crust formation mechanisms through time.

Characterization of Shock Effects in Calcite by Raman Spectroscopy: Results of Experiments

NASA Technical Reports Server (NTRS)

Bell, M. S.

2016-01-01

Carbonates comprise approx. 20% by volume of present day Earth's sedimentary rocks and store most of the terrestrial CO2 inventory. Some of the oldest meta-sedimentary rocks found on Earth contain abundant carbonate from which impact-induced release of CO2 could have played a role in the formation and evolution of the atmosphere. Carbonates are also present in the target materials for approx. 30% of all terrestrial impact structures including large impacts such as Chicxulub which happened to occur at a location with extraordinarily thick platform carbonate 3-6 km deep. The impact release of CO2 from carbonates can cause global warming as a result of the well-known greenhouse effect and have subsequent effects on climate and biota. Therefore, the shock behavior of calcite is important in understanding the Cretaceous-Paleogene event and other impacts with carbonate-bearing sediments in their target(s) such as Mars and some asteroids. A comprehensive survey utilizing a variety of techniques to characterize the effects manifest in Calcite (Iceland Spar) experimentally shocked to 60.8 GPa has been completed. Results of analysis by Raman Spectroscopy are reported here.

Mineralogy of the Pahrump Hills Region, Gale Crater, Mars

NASA Technical Reports Server (NTRS)

Rampe, E. B.; Ming, D. W.; Vaniman, D. T.; Blake, D. F.; Chipera, S. J.; Morris, R. V.; Bish, D. L.; Cavanagh, P. D.; Achilles, C. N.; Bristow, T. F.;

Transition metal catalysis in the generation of petroleum and natural gas. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mango, F.D.

1997-01-21

This project originated on the premise that natural gas could be formed catalytically in the earth rather than thermally as commonly believed. The intention was to test this hypothetical view and to explore generally the role of sedimentary metals in the generation of light hydrocarbons (C1 - C9). We showed the metalliferous source rocks are indeed catalytic in the generation of natural gas. Various metal compounds in the pure state show the same levels of catalytic activity as sedimentary rocks and the products are identical. Nickel is particularly active among the early transition metals and is projected to remain catalyticallymore » robust at all stages of catagenesis. Nickel oxide promotes the formation of n-alkanes in addition to natural gas (NG), demonstrating the full scope of the hypothetical catalytic process: The composition of catalytic gas duplicates the entire range of natural gas, from so-called wet gas to dry gas (60 to 95+ wt % methane), while gas generated thermally is consistently depleted in methane (10 to 60 wt % methane). These results support the view that metal catalysis is a major pathway through which natural gas is formed in the earth.« less

Transition metal catalysis in the generation of petroleum and natural gas. Final report, September 1, 1992--October 31, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mango, F.D.

1997-01-21

This project originated on the premise that natural gas could be formed catalytically in the earth rather than thermally as commonly believed. The intention was to test this hypothetical view and to explore generally the role of sedimentary metals in the generation of light hydrocarbons (C1 - C9). We showed the metalliferous source rocks are indeed catalytic in the generation of natural gas. Various metal compounds in the pure state show the same levels of catalytic activity as sedimentary rocks and the products are identical. Nickel is particularly active among the early transition metals and is projected to remain catalyticallymore » robust at all stages of catagenesis. Nickel oxide promotes the formation of n-alkanes in addition to natural gas (NG), demonstrating the full scope of the hypothetical catalytic process. The composition of catalytic gas duplicates the entire range of natural gas, from so-called wet gas to dry gas (60 to 95+ wt % methane), while gas generated thermally is consistently depleted in methane (10 to 60 wt % methane). These results support the view that metal catalysis is a major pathway through which natural gas is formed in the earth.« less

High-resolution rock-magnetic variability in shallow marine sediment: a sensitive paleoclimatic metronome

NASA Astrophysics Data System (ADS)

Arai, Kohsaku; Sakai, Hideo; Konishi, Kenji

1997-05-01

An outer shelf deposit in central Japan centered on the Olduvai normal polarity event in the reversed Matuyama chron reveals a close correlation of both the magnetic susceptibility and remanent intensity with the sedimentary cyclicities apparent in lithologies and molluscan assemblages. Two sedimentary cycles are characterized by distinctly similar, but double-peaked magnetic cyclicities. The rock-magnetic variability is primarily attributed to the relative abundance of terrigenous magnetic minerals, and the double peak of the variability is characterized by the concentration of finer-grained magnetic minerals. The concentration is suspected to be controlled by both climatic change and shifting proximity of the shoreline as a function of rise and fall of the sea level due to glacio-eustasy. Rock-magnetic study reveals the record of a 21 ka period of orbital precession cycles within the sedimentary cyclicity attributable to a 41 ka period of orbital obliquity forcing.

Fine-grained rutile in the Gulf of Maine: Diagenetic origin, source rocks, and sedimentary environment of deposition

USGS Publications Warehouse

Valentine, P.C.; Commeau, J.A.

1990-01-01

The Gulf of Maine, an embayment of the New England margin, is floored by shallow, glacially scoured basins that are partly filled with late Pleistocene and Holocene silt and clay containing 0.7 to 1.0 wt percent TiO2 chiefly in the form of silt-size rutile. Much of the rutile in the Gulf of Maine mud probably formed diagenetically in poorly cemented Carboniferous and Triassic coarse-grained sedimentary rocks of Nova Scotia and New Brunswick after the dissolution of titanium-rich detrital minerals (ilmenite, ilmenomagnetite). The diagenesis of rutile in coarse sedimentary rocks (especially arkose and graywacke) followed by erosion, segregation, and deposition (and including recycling of fine-grained rutile from shales) can serve as a model for predicting and prospecting for unconsolidated deposits of fine-grained TiO2. -from Authors

Geology and ground-water in western Santa Cruz County, California, with particular emphasis on the Santa Margarita Sandstone

USGS Publications Warehouse

Akers, J.P.; Jackson, L.E.

1977-01-01

The water-bearing potential of the geologic formations in the western part of Santa Cruz County, Calif., is evaluated. Most of the sedimentary formations in this area are fine-grained rocks of Tertiary age that have been folded and faulted. These rocks, in general, yield supplies of water sufficient only for individual domestic supplies. The Lompico and Santa Margarita Sandstones, however, are coarser grained and have the potential to yield moderate quantities of water (50-100 gallons per minute). Areas where the Lompico Sandstone might warrant explorations are (1) near and on the west side of the Ben Lomond fault, (2) near and south of the outcrop of the Lompico Sandstone between Ben Lomond and Felton, and (3) in the area near Bald Mountain School. The Santa Margarita Sandstone should be explored by test drilling in the area between Davenport and Bonnie Doon. The quality of ground water is generally good, although saline water occurs in the San Lorenzo Formation near Redwood Grove and Riverside Grove. (Woodard-USGS)

Hydrogeochemical signatures of thermal springs compared to deep formation water of North Germany

NASA Astrophysics Data System (ADS)

Bozau, Elke; van Berk, Wolfgang

2014-05-01

Thermal springs and hot deep formation waters can be used for geothermal energy production. Depending on the chemical composition of the used waters, geothermal power plants have to deal with scaling and corrosion effects. Therefore, the understanding of the hydrogeochemical behaviour of such waters can be helpful to enhance the efficiency of the energy production. This study is comparing hydrogeochemical characteristics of thermal springs in the Harz Mountains (North Germany) and deep formation water of the North German Basin. The Harz Mountains consist of uplifted Palaeozoic rocks, whereas the North German Basin consists of sedimentary layers of Permian, Mesozoic and Cenozoic age. Volcanic rocks are included in the Permian layers. The thickness of the sedimentary basin varies between 2 km and more than 8 km. The deep aquifers of the North German Basin are mostly not involved in the recent meteoric water cycle. Their waters have contents of Total Dissolved Solids (TDS) up to about 400 g/L. Thermal springs of the Harz Mountains are situated close to the main fracture system of the region. These springs are connected to the meteoric water cycle and display lower contents of TDS (< 25 g/L). In both geological systems the TDS content is increasing with depth and temperature. The elemental ratios of the waters (e.g., Na/Cl, Cl/Br, Na/Ca) indicate similar hydrogeochemical formation processes in the Harz Mountains and the North German Basin. The concentrations of calcium, sodium, and chloride differ due to salt dissolution and feldspar transformation (albitisation) in the thermal springs as well as in the deep formation waters. Based on today's knowledge hydrochemical and stratigraphical data from the North German Basin can be used to elucidate the geological origin of the thermal springs in the Harz Mountains. Acknowledgements. The presented data are results of the collaborative research program "gebo" (Geothermal energy and high performance drilling), financed by the Ministry of Science and Culture of the State of Lower Saxony and the company Baker Hughes.

The hydrogeochemistry of argillaceous rock formations at the Horonobe URL site, Japan

NASA Astrophysics Data System (ADS)

Hama, K.; Kunimaru, T.; Metcalfe, R.; Martin, A. J.

A hydrogeochemical investigation is being carried out as part of the Horonobe underground research laboratory (URL) project in Japan. The main aims are to: (1) investigate an actual example of a geological environment in a sedimentary rock formation in Japan; and (2) to confirm the reliability of generic technologies that may in future be applied during the geological disposal of high level radioactive waste. The main rock formations being characterized are the marine Wakkanai and Koetoi Formations (Miocene to Pliocene), consisting dominantly of siliceous shales (porcelanites) and diatomaceous shales respectively. These formations are located within the Tempoku Basin, within a back-arc tectonic setting. Rock sequences of this kind occur widely in Japan and throughout the northern Pacific region. However, prior to the present study, there was relatively little information concerning the processes controlling in situ chemical conditions and groundwater flow in such settings. Chemical data was obtained for both pumped waters and squeezed porewaters in order to characterize the hydrogeochemistry of these argillaceous rock formations. The in situ chemical conditions, residence time of the groundwaters and the evolution processes of the groundwaters were investigated. Generally, at each locality studied, shallower groundwaters are fresh and have Na-HCO 3 dominated chemistry. Deeper groundwaters are saline (TDS up to about 22,000 mg/l) and have Na-Cl dominated chemistry. However, lateral gradients in salinity are also recognized, with salinity contours in the Na-Cl dominated saline water (having TDS > 10,000 mg/l) probably varying in elevation by at least 250 m. Further investigations are required to confirm the origins of the groundwater salinity, but the Na-Cl dominated groundwater chemistry is provisionally explained as a consequence of the dilution of fossil seawater, accompanied by diagenetic water-rock reactions. The vertical and lateral salinity gradients can potentially be used to test the validity of coupled groundwater flow models. A conceptual model is tentatively suggested in which the spatial distribution and frequency of fractures helps to control the spatial distribution of groundwater salinity. Future investigations will clarify the timing of flow, the flow directions and the characteristics of the flow paths.

Source rock contributions to the Lower Cretaceous heavy oil accumulations in Alberta: a basin modeling study

USGS Publications Warehouse

Berbesi, Luiyin Alejandro; di Primio, Rolando; Anka, Zahie; Horsfield, Brian; Higley, Debra K.

2012-01-01

The origin of the immense oil sand deposits in Lower Cretaceous reservoirs of the Western Canada sedimentary basin is still a matter of debate, specifically with respect to the original in-place volumes and contributing source rocks. In this study, the contributions from the main source rocks were addressed using a three-dimensional petroleum system model calibrated to well data. A sensitivity analysis of source rock definition was performed in the case of the two main contributors, which are the Lower Jurassic Gordondale Member of the Fernie Group and the Upper Devonian–Lower Mississippian Exshaw Formation. This sensitivity analysis included variations of assigned total organic carbon and hydrogen index for both source intervals, and in the case of the Exshaw Formation, variations of thickness in areas beneath the Rocky Mountains were also considered. All of the modeled source rocks reached the early or main oil generation stages by 60 Ma, before the onset of the Laramide orogeny. Reconstructed oil accumulations were initially modest because of limited trapping efficiency. This was improved by defining lateral stratigraphic seals within the carrier system. An additional sealing effect by biodegraded oil may have hindered the migration of petroleum in the northern areas, but not to the east of Athabasca. In the latter case, the main trapping controls are dominantly stratigraphic and structural. Our model, based on available data, identifies the Gordondale source rock as the contributor of more than 54% of the oil in the Athabasca and Peace River accumulations, followed by minor amounts from Exshaw (15%) and other Devonian to Lower Jurassic source rocks. The proposed strong contribution of petroleum from the Exshaw Formation source rock to the Athabasca oil sands is only reproduced by assuming 25 m (82 ft) of mature Exshaw in the kitchen areas, with original total organic carbon of 9% or more.

Reconnaissance geologic map of the Dixonville 7.5' quadrangle, Oregon

USGS Publications Warehouse

Jayko, Angela S.; Wells, Ray E.; Digital Database by Givler, R. W.; Fenton, J.S.; Sinor, M.

2001-01-01

The Dixonville 7.5 minute quadrangle is situated near the edge of two major geologic and tectonic provinces the northernmost Klamath Mountains and the southeastern part of the Oregon Coast Ranges (Figure 1). Rocks of the Klamath Mountains province that lie within the study area include ultramafic, mafic, intermediate and siliceous igneous types (Diller, 1898, Ramp, 1972, Ryberg, 1984). Similar rock associations that lie to the southwest yield Late Jurassic and earliest Cretaceous radiometric ages (Dott, 1965, Saleeby, et al., 1982, Hotz, 1971, Harper and Wright, 1984). These rocks, which are part of the Western Klamath terrane (Western Jurassic belt of (Irwin, 1964), are considered to have formed within an extensive volcanic arc and rifted arc complex (Harper and Wright, 1984) that lay along western North America during the Late Jurassic (Garcia, 1979, Garcia, 1982, Saleeby, et al., 1982, Ryberg, 1984). Imbricate thrust faulting and collapse of the arc during the Nevadan orogeny, which ranged in age between about 150 to 145 Ma in the Klamath region (Coleman, 1972, Saleeby, et al., 1982, Harper and Wright, 1984) was syntectonic with, or closely followed by deposition of the volcano-lithic clastic rocks of the Myrtle Group. The Myrtle Group consists of Upper Jurassic and Lower to middle Cretaceous turbidity and mass flow deposits considered to be either arc basin and/or post-orogenic flysh basins that were syntectonic with the waning phases of arc collapse (Imlay et al., 1959, Ryberg, 1984, Garcia, 1982, Roure.and Blanchet, 1983). The intermediate and mafic igneous rocks of the Rogue arc and the pre-Nevadan sedimentary cover (the Galice Formation, (Garcia, 1979) are intruded by siliceous and intermediate plutonic rocks principally of quartz diorite and granodiorite composition (Dott, 1965, Saleeby, et al., 1982, Garcia, 1982, Harper and Wright, 1984). The plutonic rocks are locally tectonized into amphibolite, gneiss, banded gneiss and augen gneiss. Similar metamorphic rocks have yielded metamorphic ages of 165 to 150 Ma (Coleman, 1972, Hotz, 1971, Saleeby, et al., 1982, Coleman and Lanphere, 1991). The Jurassic arc rocks and sedimentary cover occur as a tectonic outlier in this region (Figure 2) as they are bound to the northwest and southeast by melange, broken formation and semi-schists of the Dothan Formation and Dothan Formation(?) that are considered part of a late Mesozoic accretion complex (Ramp, 1972, Blake, et al., 1985). The plutonism that accompanied arc formation and tectonic collapse of the arc does not intrude the structurally underlying Dothan Formation, indicating major fault displacements since the Early Cretaceous. Semischistose and schistose rocks of the accretion complex have yielded metamorphic ages of around 125-140 Ma where they have been studied to the southwest (Coleman and Lanphere, 1971, Dott, 1965, Coleman, 1972). These rocks were unroofed and unconformably overlain by marine deposits by late early Eocene time (Baldwin, 1974). The early Tertiary history of this region is controversial. The most recent interpretation is that during the Paleocene and early Eocene the convergent margin was undergoing transtension or forearc extension as suggested by the voluminous extrusion of pillow basalt and related dike complexes (Wells, et al., 1984, Snavely, 1987). This episode was followed shortly by thrust and strike-slip faulting in the late early Eocene (Ryberg, 1984). During the Eocene, the Mesozoic convergent margin association of arc, clastic basin, and accretion complex was partly unroofed and faulted against early Cenozoic rocks of the Oregon Coast Ranges (Ramp, 1972, Baldwin, 1974, Champ, 1969, Ryberg, 1984). Faults that are typical of this period of deformation include high-angle reverse faults with a very strong component of strike-slip displacement characterized by a low-angle rake of striae. Thrust and oblique-slip faults are ubiquitous in early Tertiary rocks to the northwest (Ryberg, 1984, Niem and Niem, 1990). The late Mesozoic and early Cenozoic arc and forearc rocks are unconformably overlain to the east by the late Eocene and younger, mainly continental fluvial deposits and pyroclastic flows of the Cascade arc (Peck, et al., 1964, Baldwin, 1974, Walker and MacLeod, 1991). Minor fossiliferous shallow marine sandstone is locally present. The volcanic sequence consists of a homoclinal section of about 1 to 2 kilometers of andesitic to rhyolitic flows and ash flow tuff. The section is gently east-tilted and is slightly disrupted by NE trending faults with apparent normal separation.

Episodic vein formation in Gale crater, Mars: evidence for an extended history of liquid water

NASA Astrophysics Data System (ADS)

Kronyak, R. E.; Fedo, C.; Banham, S.; Edgett, K. S.; Newsom, H. E.; Nachon, M.; Kah, L. C.

2017-12-01

The sedimentary rock record of Gale crater is consistent with deposition in an ancient lake basin. These strata represent aqueous and potentially habitable past conditions that existed over a relatively small part of Mars' geologic history. Post-depositional fluid migration is recorded by the presence of veins, which have been prevalent features throughout Curiosity's mission. These veins record later episodes of fluid flow and represent an extended history of liquid water stability, and perhaps habitability. White Ca-sulfate veins are observed in the Bradbury (Yellowknife Bay), Mount Sharp (Murray formation), and Siccar Point (Stimson formation) groups across a range of lithologies. At Yellowknife Bay and in the Stimson, Ca-sulfate veins characteristically exhibit mm-scale thicknesses. In the Pahrump Hills (PH) area, 62% of measured veins in the Murray formation are <3 mm thick. However, PH also contains a population of veins that range from 1-5 cm thick that commonly contain gray inclusions and are crosscut by thinner white veins. Similar gray material occurs along the interface between wall rock and Ca-sulfate and is interpreted as a precursor vein fill. Gray veins at PH are more erosionally resistant relative to Ca-sulfate and average 1 mm in width. Additionally, gray veins exhibit elevated Mg and depleted Ca, distinguishing them compositionally from Ca-sulfate veins. Veins continue locally throughout the stratigraphic section. The lowermost Stimson sandstones at the Missoula outcrop contain white clasts and elevated Ca-sulfate, suggesting the formation of Murray veins prior to the deposition of the Stimson formation. Near the Old Soaker outcrop, bedding-parallel sulfate may represent syndepositional gypsum precipitation. In the context of time, the multiple vein systems identified in the Gale crater sedimentary fill shed light on the sequence and evolution of fluids responsible for their deposition. It is envisioned that sulfates first precipitated contemporaneously with the deposition of the Murray formation, followed by burial, lithification, and fracturing to form the earliest gray and sulfate veins. The Murray was then exhumed and eroded, followed by deposition and lithification of the Stimson formation, fracturing, and precipitation of the latest sulfate veins.

Palaeoproterozoic Volcanic Massive Sulphides (VMS) in the Lithuanian crystalline basement: evidences for a back-arc tectonic setting

NASA Astrophysics Data System (ADS)

Skridlaite, Grazina; Siliauskas, Laurynas

2014-05-01

In the southwestern part of the East European Craton (EEC), several events of Palaeoproterozoic volcanic arc magmatic activity were recognized in the concealed crystalline basement. In Lithuania, the TTG suites of 1.89 Ga and 1.86-1.84 Ga were later metamorphosed in amphibolite and granulite facies conditions. Remnants of a volcano-sedimentary sequence metamorphosed in green schist and amphibolite facies conditions were discovered in central and southern Lithuania. In southern Lithuania, the upper part of the Lazdijai 13 (Lz13) drilling (at c. 493 m depth) consists of exhalitic quartz chlorite cherts mixed with andesitic rocks. The rocks are impregnated with magnetite in some places replacing calcite. Most of the magnetite grains are overgrown by a dendritic kovelite, which may have formed while magnetite was still in aqueous surrounding. Other accessory minerals are xenotime, zircon, apatite, Sr-Ba sulphates etc. The cherts are underlain by a metaandesite which volcanic structures were obscured by hydrothermal alteration, i.e. the idiomorphic magnetite crystals and porphyritic plagioclase grains were replaced by clay minerals and quartz or muscovite in many places. Thin metamorphosed mudstone layers turned into garnet, biotite (+/-staurolite) and chlorite schists. The rocks were affected by silicification, chloritization, argilitization and carbonatization. Taking into account the rock composition, micro and macro scale alteration zones and absence of breccia, the whole package resembles an outer part of the VMS stockwork. The lower boundary at 526 m is sharp, marked by a quartz vein, below which lies quartz, biotite (+/- chlorite) bearing schist with minor tremolite (former sandstone). It was intensely affected by silicification, and was enriched in Na, K and Ca. Accessory minerals are monazite, xenotime, apatite and detrital zircon. The schist exhibits fine mineral foliation, and is fine-grained. A 4 m thick granitic vein cuts the rock at 654 m depth, below which there are amphibolites with layers or lenses of skarns formed in marbles. Some amphibolites resemble porphyritic basalts. These might be dikes of basalts, which are common for back arc VMS surroundings. The volcano-clastic rock from the Lz13 yielded c. 1.83 Ga and c. 1.80 Ga ages. The whole rock Sm-Nd isotopic composition points towards juvenile origin of the rock (TDM=2.08 Ga, ɛNd (1.9) +1.8). After the comparison of the obtained data set with VMS deposits formed in different environments, it is most likely that the volcano-sedimentary sequence of Lz13 was formed in a back arc tectonic setting. The volcano-sedimentary sequence can be correlated with the 1.83 Ga Oskarshamn-Jönköping Belt (Mansfeld et al., 2005) and the volcano-sedimentary Vetlanda formation (Makowsky and Mansfeld, 2013) in southeastern Sweden. The c. 1.83-1.80 Ga volcanic arc and back-arc system continues from southeastern Sweden through the Baltic Sea to Lithuania. This is a contribution to the Open Access Centre activities Mansfeld, J., Beunk, F.F. and Barling, J., 2005. GFF, 127: 149-157 Makowsky, F., Mansfeld, J., 2013. 31st Nordic Geological Winter Meeting, Lund, Sweden, 89-90.

Review of the general geology and solid-phase geochemical studies in the vicinity of the Central Oklahoma aquifer

USGS Publications Warehouse

Mosier, Elwin L.; Bullock, John H.

1988-01-01

The Central Oklahoma aquifer is the principal source of ground water for municipal, industrial, and rural use in central Oklahoma. Ground water in the aquifer is contained in consolidated sedimentary rocks consisting of the Admire, Council Grove, and Chase Groups, Wellington Formation, and Garber Sandstone and in the unconsolidated Quaternary alluvium and terrace deposits that occur along the major stream systems in the study area. The Garber Sandstone and the Wellington Formation comprise the main flow system and, as such, the aquifer is often referred to as the 'Garber-Wellington aquifer.' The consolidated sedimentary rocks consist of interbedded lenticular sandstone, shale, and siltstone beds deposited in similar deltaic environments in early Permian time. Arsenic, chromium, and selenium are found in the ground water of the Central Oklahoma aquifer in concentrations that, in places, exceed the primary drinking-water standards of the Environmental Protection Agency. Gross-alpha concentrations also exceed the primary standards in some wells, and uranium concentrations are uncommonly high in places. As a prerequisite to a surface and subsurface solid-phase geochemical study, this report summarizes the general geology of the Central Oklahoma study area. Summaries of results from certain previously reported solid-phase geochemical studies that relate to the vicinity of the Central Oklahoma aquifer are also given; including a summary of the analytical results and distribution plots for arsenic, selenium, chromium, thorium, uranium, copper, and barium from the U.S. Department of Energy's National Uranium Resource Evaluation (NURE) Program.

Bedrock geologic map of the Miles Pond and Concord quadrangles, Essex and Caledonia Counties, Vermont, and Grafton County, New Hampshire

USGS Publications Warehouse

Rankin, Douglas W.

2018-04-20

The bedrock geologic map of the Miles Pond and Concord quadrangles covers an area of approximately 107 square miles (276 square kilometers) in east-central Vermont and adjacent New Hampshire, north of and along the Connecticut River. This map was created as part of a larger effort to produce a new bedrock geologic map of Vermont through the collection of field data at a scale of 1:24,000. The majority of the map area consists of the Bronson Hill anticlinorium, a post-Early Devonian structure that is cored by metamorphosed Cambrian to Silurian sedimentary, volcanic, and plutonic rocks. A major feature on the map is the Monroe fault, interpreted to be a west-directed, steeply dipping Late Devonian (Acadian) thrust fault. To the west of the Monroe fault, rocks of the Connecticut Valley-Gaspé trough dominate and consist primarily of metamorphosed Silurian and Devonian sedimentary rocks. To the north, the Victory pluton intrudes the Bronson Hill anticlinorium. The Bronson Hill anticlinorium consists of the metamorphosed Albee Formation, the Ammonoosuc Volcanics, the Comerford Intrusive Complex, the Highlandcroft Granodiorite, and the Joselin Turn tonalite. The Albee Formation is an interlayered, feldspathic metasandstone and pelite that is locally sulfidic. Much of the deformed metasandstone is tectonically pinstriped. In places, one can see compositional layering that was transposed by a steeply southeast-dipping foliation. The Ammonoosuc Volcanics are lithologically complex and predominantly include interlayered and interfingered rhyolitic to basaltic volcanic and volcaniclastic rocks, as well as lesser amounts of siltstone, phyllite, graywacke, and grit. The Comerford Intrusive Complex crops out east of the Monroe fault and consists of metamorphosed gabbro, diorite, tonalite, aplitic tonalite, and crosscutting diabase dikes. Abundant mafic dikes from the Comerford Intrusive Complex intruded the Albee Formation and Ammonoosuc Volcanics east of the Monroe fault. The Highlandcroft Granodiorite and Joslin Turn tonalite plutons intruded during the Middle to Late Ordovician.West of the Monroe fault, the Connecticut Valley-Gaspé trough consists of the Silurian and Devonian Waits River and Gile Mountain Formations. The Waits River Formation is a carbonaceous muscovite-biotite-quartz (±garnet) phyllite containing abundant beds of micaceous quartz-rich limestone. The Gile Mountain Formation consists of interlayered metasandstone and graphitic (and commonly sulfidic) slate, along with minor calcareous metasandstone and ironstone. Graded bedding is common in the Gile Mountain Formation. Rocks of the Devonian New Hampshire Plutonic Suite intruded as plutons, dikes, and sills. The largest of these is the Victory pluton, which consists of weakly foliated, biotite granite and granodiorite. The Victory pluton also intruded a large part of the Albee Formation to the north.This report consists of a geologic map and an online geographic information systems database that includes contacts of bedrock geologic units, faults, outcrops, and structural geologic information. The geologic map is intended to serve as a foundation for applying geologic information to problems involving land use decisions, groundwater availability and quality, earth resources such as natural aggregate for construction, assessment of natural hazards, and engineering and environmental studies for waste disposal sites and construction projects.

Petrography and geochemistry characteristics of the lower Cretaceous Muling Formation from the Laoheishan Basin, Northeast China: implications for provenance and tectonic setting

NASA Astrophysics Data System (ADS)

Song, Yu; Liu, Zhaojun; Meng, Qingtao; Wang, Yimeng; Zheng, Guodong; Xu, Yinbo

2017-06-01

The petrography, mineralogy and geochemistry of sedimentary rocks from the lower Cretaceous Muling Formation (K1ml) in the Laoheishan basin, northeast (NE) China are studied to determine the weathering intensity, provenance and tectonic setting of the source region. Petrographic data indicate the average quartz-feldspar-lithic fragments (QFL) of the sandstone is Q = 63 %, F = 22 %, and L = 15 %. Lithic fragments mainly contain volcanic clasts that derived from surrounding basement. X-ray diffraction (XRD) data reveal abundant clay and detrital minerals (e.g. quartz), as well as minor calcite in the fine-grained sediments. The Hf contents and element concentration ratios such as Al2O3/TiO2, Co/Th, La/Sc, and La/Th are comparable to sediments derived from felsic and intermediate igneous rocks. The strong genetic relationship with the igneous rocks from the northwest and northeast areas provides evidence that the sediments of the Muling Formation (K1ml) in the Laoheishan basin have been derived from this area. The chemical index of alteration (CIA) and index of chemical variability (ICV) reveal an intensive weathering in the source region of the sediments. The multidimensional tectonic discrimination diagrams indicate that the source rocks of K1ml are mainly derived from the collision system. However, they may also comprise sediments derived from the continental rift system. The results are consistent with the geology of the study area.

Quantitative characterisation of sedimentary grains

NASA Astrophysics Data System (ADS)

Tunwal, Mohit; Mulchrone, Kieran F.; Meere, Patrick A.

2016-04-01

Analysis of sedimentary texture helps in determining the formation, transportation and deposition processes of sedimentary rocks. Grain size analysis is traditionally quantitative, whereas grain shape analysis is largely qualitative. A semi-automated approach to quantitatively analyse shape and size of sand sized sedimentary grains is presented. Grain boundaries are manually traced from thin section microphotographs in the case of lithified samples and are automatically identified in the case of loose sediments. Shape and size paramters can then be estimated using a software package written on the Mathematica platform. While automated methodology already exists for loose sediment analysis, the available techniques for the case of lithified samples are limited to cases of high definition thin section microphotographs showing clear contrast between framework grains and matrix. Along with the size of grain, shape parameters such as roundness, angularity, circularity, irregularity and fractal dimension are measured. A new grain shape parameter developed using Fourier descriptors has also been developed. To test this new approach theoretical examples were analysed and produce high quality results supporting the accuracy of the algorithm. Furthermore sandstone samples from known aeolian and fluvial environments from the Dingle Basin, County Kerry, Ireland were collected and analysed. Modern loose sediments from glacial till from County Cork, Ireland and aeolian sediments from Rajasthan, India have also been collected and analysed. A graphical summary of the data is presented and allows for quantitative distinction between samples extracted from different sedimentary environments.

Rock glaciers originating from mass movements: A new model based on field data

NASA Astrophysics Data System (ADS)

Reitner, J. M.; Gruber, A.

2009-04-01

The morphological and geological conditions for the formation of rock glaciers in Alpine environments seem to be clear according to our present knowledge (BARSCH, 1996; HAEBERLI et al. 2006). All known examples derive from porous more or less coarse grained sedimentary bodies, either from moraines or, in most cases, from talus fans. In the latter case the debris accumulation originates overwhelmingly from physical weathering, rock falls or rock avalanches in proximity to rockwalls. However, in the course of geological mapping in the crystalline areas of Eastern and Northern Tyrol (Schober Gruppe, Tuxer Alpen) we found an additional setting. Some relict rock glaciers occur directly at the bulging toe of bedrock slopes, which had been affected by deep-seated gravitational slope deformations (REITNER, 2003; GRUBER, 2005). Furthermore rock glaciers are also present in ridge-top depressions and similar graben-like features that originated from gravitational processes in jointed bedrock. In all these cases talus fans with debris accumulation are missing in the source area of those rock glaciers. According to our model the disintegration of jointed rocks by creeping mass movements resulted in an increased volume of joint space. This enabled the formation of interstitial ice under permafrost conditions. Increased ice saturation led to the reduction of the angle of internal friction and finally to the initial formation of a rock glacier. Abundant material was provided for the further movement and thus for formation of quite large rock glaciers due to the previous and maybe still ongoing slope deformation. Most rock glaciers of this type originated from mass movements of sagging -type (Sackung sensu ZISCHINSKY, 1966), which illustrates the continuous transition from gravitational to periglacial creep process in high Alpine areas. All studied examples are of Lateglacial age according to the altitude in correspondence to the known amount of permafrost depression compared to modern time. Thus, on the one hand such rock glaciers postdate the formation of the mass movements, which enable a chronological constraint of this phenomenon on the base of our knowledge of climate history. On the other hand, those examples with rock glaciers linked at various altitudes with mass movements also mirror former stepwise permafrost degradation, where rock glacier formation moved to higher altitudes. In this respect, and envisaging a rising permafrost boundary, rock glacier formation on slopes affected by mass movements should be anticipated for the future. References: BARSCH, D. (1996): Rockglaciers. - Springer Verlag, Berlin. GRUBER, A. (2005) Bericht 2004 über geologische Aufnahmen im Quartär der Nördlichen Tuxer Alpen auf Blatt 148 Brenner.- Jahrbuch der Geologischen Bundesanstalt, 145, 337-343, Wien. HAEBERLI, W. et al. (2006): Permafrost Creep and Rock Glacier Dynamics.- Permafrost and Periglac. Process., 17, 189-214 (2006), Wiley Interscience, New York REITNER, J. M. (2003a): Bericht 1998-99 über geologische Aufnahmen im Quartär und Kristallin auf Blatt 179 Lienz.- Jahrbuch der Geologischen Bundesanstalt., 143, 514-522, Wien. ZISCHINSKY, U. (1966): On the deformation of high slopes. Proc.-1st Int. Conf.Soc.Rock Mech. Lisbon, 179-185.

Gold deposition by sulfidation of ferrous Fe in the lacustrine sediments of the Pueblo Viejo district (Dominican Republic): The effect of Fe-C-S diagenesis on later hydrothermal mineralization in a Maar-Diatreme complex

USGS Publications Warehouse

Kettler, R.M.; Rye, R.O.; Kesler, S.E.; Meyers, P.A.; Polanco, J.; Russell, N.

1992-01-01

The Pueblo Viejo district, located in the Cordillera Central of the Dominican Republic, contains large Au-Ag deposits associated with acid-sulfate alteration within spilites, conglomerates and carbonaceous sedimentary rocks that were deposited in a maar-diatreme complex. Much of the Au mineralization occurs in pyritic, carbonaceous siltstones of the Pueblo Viejo Maar-Diatreme Member of the Cretaceous Los Ranchos Formation. Pyrite is the only Fe-bearing phase in mineralized rock, whereas siderite is the dominant Fe-bearing phase in siltstones distal to mineralization. Disseminated pyrite occurs as framboids, cubes, pyritohedra, concretions and cement. Early framboids occur throughout the district. Au occurs as inclusions in later non-framboid disseminated pyrite (NFDP); an occurrence that is interpreted to be indicative of contemporaneous deposition. Pyrite framboids exhibit a wide range of ??34Scdt-values (-17.5 to +4.8???) and are interpreted to have formed during biogenic reduction of pore-water sulfate. The NFDP yield restricted ??34Scdt-values ( x ?? = -5.2???, s = ??2.4???, n = 43) similar to those obtained from later vein pyrite ( x ?? = -6.4???, s = ??1.5???, n = 12). Alunite and barite have ??34S-values ranging from +18.8 to +21.6???. The interpretation that the NFDP, vein pyrite, alunite and barite, and possibly even the framboidal pyrite share a common source of igneous sulfur is supported by the ??34S data. Siderite occurs as concretions and cement, contains abundant Mg (Fe0.75Mg0.19Mn0.03Ca0.02CO3) and has ??13Cpdb- and ??18Osmow-values ranging from -2.5 to +1.1%. and +14.6 to +19.5???, respectively. These data are consistent with the interpretation that the siderite formed in lacustrine sediments and that the carbonate in the siderite is probably methanogenic, although contributions from oxidation of organic matter during biogenic sulfate reduction, thermal decarboxylation of organic matter, or magmatic vapor cannot be ruled out. Disseminated Au mineralization in the sedimentary rocks formed when a hydrothermal fluid encountered reactive Fe2+ in diagenetic siderite. The ensuing pyrite deposition consumed H2S and destabilized the Au (HS)-2 complex, leading to precipitation of Au. The capacity of the sedimentary rocks to consume H2S and precipitate Au was controlled by the amount of non-pyrite Fe present as siderite. The abundance of siderite was controlled by the extent of pyrite formation during diagenesis. ?? 1992.

Mineral potential modelling of gold and silver mineralization in the Nevada Great Basin - a GIS-based analysis using weights of evidence

USGS Publications Warehouse

Mihalasky, Mark J.

2001-01-01

The distribution of 2,690 gold-silver-bearing occurrences in the Nevada Great Basin was examined in terms of spatial association with various geological phenomena. Analysis of these relationships, using GIS and weights of evidence modelling techniques, has predicted areas of high mineral potential where little or no mining activity exists. Mineral potential maps for sedimentary (?disseminated?) and volcanic (?epithermal?) rock-hosted gold-silver mineralization revealed two distinct patterns that highlight two sets of crustal-scale geologic features that likely control the regional distribution of these deposit types. The weights of evidence method is a probability-based technique for mapping mineral potential using the spatial distribution of known mineral occurrences. Mineral potential maps predicting the distribution of gold-silver-bearing occurrences were generated from structural, geochemical, geomagnetic, gravimetric, lithologic, and lithotectonic-related deposit-indicator factors. The maps successfully predicted nearly 70% of the total number of known occurrences, including ~83% of sedimentary and ~60% of volcanic rock-hosted types. Sedimentary and volcanic rockhosted mineral potential maps showed high spatial correlation (an area cross-tabulation agreement of 85% and 73%, respectively) with expert-delineated mineral permissive tracts. In blind tests, the sedimentary and volcanic rock-hosted mineral potential maps predicted 10 out of 12 and 5 out of 5 occurrences, respectively. The key mineral predictor factors, in order of importance, were determined to be: geology (including lithology, structure, and lithotectonic terrane), geochemistry (indication of alteration), and geophysics. Areas of elevated sedimentary rock-hosted mineral potential are generally confined to central, north-central, and north-eastern Nevada. These areas form a conspicuous ?V?-shape pattern that is coincident with the Battle Mountain-Eureka (Cortez) and Carlin mineral trends and a segment of the Roberts Mountain thrust front, which bridges the southern ends of the trends. This pattern appears to delineate two well-defined, sub-parallel, northwest?southeast-trending crustal-scale structural zones. These features, here termed the ?Carlin? and ?Cortez? structural zones, are believed to control the regional-scale distribution of the sedimentary rock-hosted occurrences. Mineralizing processes were focused along these structural zones and significant ore deposits exist where they intersect other tectonic zones, favorable host rock-types, and (or) where appropriate physio-chemical conditions were present. The origin and age of the Carlin and Cortez structural zones are not well constrained, however, they are considered to be transcurrent features representing a long-lived, deep-crustal or mantle-rooted zone of weakness. Areas of elevated volcanic rock-hosted mineral potential are principally distributed along two broad and diffuse belts that trend (1) northwest-southeast across southwestern Nevada, parallel to the Sierra Nevada, and (2) northeast-southwest across northern Nevada, extending diagonally from the Sierra Nevada to southern Idaho. The first belt corresponds to the Walker Lane shear zone, a wide region of complex strike-slip faulting. The second, here termed the ?Humboldt shear(?) zone?, may represent a structural zone of transcurrent movement. Together, the Walker Lane and Humboldt shear(?) zones are believed to control the regional-scale distribution of volcanic rock-hosted occurrences. Volcanic rock-hosted mineralization was closely tied to the southward and westward migration of Tertiary magmatism across the region (which may have been mantle plume-driven). Both magmatic and mineralizing processes were localized and concentrated along these structural zones. The Humboldt shear(?) zone may have also affected the distribution of sedimentary rock-hosted mineralization along the Battle Mountain?Eureka (C

Rifting and reactivation of a Cretaceous structural belt at the northern margin of the South China Sea

NASA Astrophysics Data System (ADS)

Nanni, Ugo; Pubellier, Manuel; Chan, Lung Sang; Sewell, Roderick J.

2017-04-01

The Tiu Tang Lung Fault, Hong Kong Special Administrative Region - China, is located on the northern stretched continental margin of the South China Sea. Along this fault, Middle Jurassic volcanic rocks of the Tai Mo Shan Formation are tectonically juxtaposed on Lower Cretaceous sedimentary rocks of the Pat Sin Leng Formation. Both extensional detachments and compressional features are observed and various genetic strain configurations are proposed for the Tiu Tang Lung Fault with implications for understanding the dynamics of the pre-South China Sea rifting during the Cretaceous. We have identified tilted bedding planes in the continental deposits of the Pat Sin Leng Formation which can be related to Early Cretaceous syn-extensional deposition. A mid-Cretaceous penetrative top-to-the-south to top-to-the-west shear fabric is also observed and serves as an indicator of the strain pattern. This deformation is expressed by cleavages, schistosity, S/C fabrics, kink-folds, phacoids and stretched pebbles at both a macroscopic and microscopic scale. Cleavages and bedding are generally sub-parallel to the local shear orientation. The whole sedimentary pile is crosscut by Cenozoic N70 and N150 normal faults. These constraints, together with previous fission track, seismic and structural data, allow us to reinterpret the kinematics of this domain during syn-orogenic to syn-extensional periods. The observed top-to-the-south thrusting event is coeval with NE-SW strike-slip sinistral fault movement. Subsequent N-S extension can be correlated with South China Sea rifting from Eocene to Oligocene. These observations reveal a polyphase history associated with continental margin inversion which witnessed localized extension on previous compressional structures.

Characterization of the Martian surface deposits by the Mars Pathfinder rover, Sojourner.

NASA Astrophysics Data System (ADS)

Matijevic, J. R.; Crisp, J.; Bickler, D. B.; Banes, R. S.; Cooper, B. K.; Eisen, H. J.; Gensler, J.; Haldemann, A.; Hartman, F.; Jewett, K. A.; Matthies, L. H.; Laubach, S. L.; Mishkin, A. H.; Morrison, J. C.; Nguyen, T. T.; Sirota, A. R.; Stone, H. W.; Stride, S.; Sword, L. F.; Tarsala, J. A.; Thompson, A. D.; Wallace, M. T.; Welch, R.; Wellman, E.; Wilcox, B. H.; Ferguson, D.; Jenkins, P.; Kolecki, J.; Landis, G. A.; Wilt, D.; Rover Team

1997-12-01

The Mars Pathfinder rover discovered pebbles on the surface and in rocks that may be sedimentary - not volcanic - in origin. Surface pebbles may have been rounded by Ares flood waters or liberated by weathering of sedimentary rocks called conglomerates. Conglomerates imply that water existed elsewhere and earlier than the Ares flood. Most soil-like deposits are similar to moderately dense soils on Earth. Small amounts of dust are currently settling from the atmosphere.

Archean sedimentation and tectonics in southern Africa

NASA Technical Reports Server (NTRS)

Kidd, W. S. F.

1984-01-01

Sequences in the Barberton Mountain Land greenstone belt (southern Africa) were examined to determine the nature of the sedimentary rocks, their tectonic implications, and their bearing on the present large-scale structural condition of the belt. Also assessed was whether there was evidence for a significant component of shallow-water-deposited sedimentary rocks in the parent materials of the Limpopo belt. The nature of a largehigh strain zone on the southern margin of the central Limpopo belt was examined.

Final Environmental Assessment for Construction of Fisher House II, Wright-Patterson Air Force Base, Ohio

DTIC Science & Technology

2008-03-25

aquifer that supplies drinking water to much of southwestern Ohio. This is an unconsolidated aquifer of glacial origin ranging in thickness from 40 to...underlying Wright-Patterson AFB is gently dipping Ordovician and Silurian sedimentary rock. The base is located on the crest of the Cincinnati Arch...a broad anticline that drops to the north- northeast at approximately five feet per mile. This sedimentary rock consists mainly of shales with thin

Field Demonstration of Propane Biosparging for In Situ Remediation of N-Nitrosodimethylamine (NDMA) in Groundwater

DTIC Science & Technology

2015-12-01

and metamorphic rocks that make up the Sierra Nevada Mountain Range. Aerojet is underlain by fluvial and marine sedimentary deposits ranging in...age from Cretaceous to Recent. These sedimentary deposits unconformably overlie Jurassic-aged metamorphic basement rocks that dip to the west. These...BSW-1. Figure 5-3. Bromide concentrations in PMW-2, PMW-3 ( used as injection well), and PMW-4 during 14-day tracer study. Figure 5-4. Darcy

A petrological study of Paleoarchean rocks of the Onverwacht Group: New insights into the geologic evolution of the Barberton Greenstone Belt, South Africa

NASA Astrophysics Data System (ADS)

Grosch, E. G.; Mcloughlin, N.; Abu-Alam, T. S.; Vidal, O.

2012-12-01

This study presents a multi-disciplinary petrological approach applied to surface samples and a total of 800 m of scientific drill core that furthers our understanding of the geologic evolution of the ca. 3.5 to 3.2 Ga Onverwacht Group of the Barberton greenstone belt (BGB), South Africa. Detrital zircon grains in coarse (diamictite) to fine-grained clastic sedimentary rocks of the Noisy formation (drill core KD2a) that unconformably overlies the volcanic ca. 3472 Ma Hooggenoeg Formation, are investigated by laser ablation LA-ICP-MS to constrain their 207Pb/206Pb ages for depositional age and provenance. A wide range in 207Pb/206Pb ages between ca. 3600 and 3430 Ma is reported, corresponding to surrounding TTG plutons and the ca.3667-3223 Ma Ancient Gneiss Complex. The youngest detrital zircon grain identified has an age of 3432 ± 10 Ma. Given the short time interval for a major change in geologic environment between ca. 3472 Ma and ca. 3432 Ma, it is argued here, that the Noisy formation is the earliest tectonic basin in the BGB, which developed during major tectonic uplift at ca. 3432 Ma. In the overlying ca. 3334 Ma Kromberg type-section, application of a chlorite thermodynamic multi-equilibrium calculation, dioctahedral mica hydration-temperature curve and pseudosection modelling, indicates a wide range in metamorphic conditions from sub-greenschist to the uppermost greenschist facies across the Kromberg type-section. A central mylonitic fuchsite-bearing zone, referred to as the Kromberg Section Mylonites, records at least two metamorphic events: a high-T, low-P (420 ± 30oC, < 3kbar) metamorphism, and a lower-T event (T = 240-350oC, P = 2.9 ± 0.15kbar) related to retrograde metamorphism. An inverted metamorphic field gradient is documented beneath the KSM suggesting thrust repetition of the Kromberg sequence over the clastic rocks of the Noisy formation at ca. 3.2 Ga. This study also presents the first SIMS multiple sulfur isotope dataset on sulfides from the BGB and is used to test current models of mid-Archean biogeochemical sulfur cycling. In-situ δ34SCDT and Δ33S values of volcanic, detrital, diagenetic and hydrothermal pyrite of the Kromberg and Noisy Formations are presented. The Kromberg cherts and mafic-ultramafic hydrothermal vein pyrites exhibit Δ33S of -0.20 to +2.50‰, and δ34SCDT from -6.00 to +1.50‰ recording mixing between atmospheric sulfur and hydrothermal magmatic fluids. The Noisy sedimentary sequence contains detrital and diagenetic pyrites with a significant variation in Δ33S of -0.62 to +1.4‰ and δ34SCDT between -7.00 and +12.6‰ in the upper turbidite unit, to more narrow isotopic ranges with magmatic-atmospheric values in the underlying polymictitic diamictite. A sedimentary quartz-pyrite vein in the diamictite records the largest range and most negative δ34SCDT values so far reported from an Archean terrain (δ34SCDT = -55.04 to +27.46‰), and suggests shallow-level boiling and hydrogen release into early (ca. 3432 Ma) tectonic sedimentary basins during sulfide precipitation and a new possible environment for early microbial life.

Mineral resource of the month: diatomite

USGS Publications Warehouse

Founie, Alan

2006-01-01

Diatomite is a soft, very fine-grained, siliceous sedimentary rock that is usually very light grey or beige in color. It is very finely porous, very low in density and essentially chemically inert. Rocks containing diatomite are excellent reservoir rocks for hydrocarbons.

Geology and hydrology for environmental planning in Washtenaw County, Michigan

USGS Publications Warehouse

Fleck, William B.

1980-01-01

Washteaw County is underlain by glacial deposits that range in thickness from about 50 feet to about 450 feet. Underlying the glacial deposits are sedimentary rocks of Mississippian and Devonian age. The youngest of these rocks are the sandstones of the Marshall Formation in the western part of the county;  the oldest are the limestones of the Detroit River Group in the southeast corner.Sand and gravel deposits in some places in the county may yield more than 500 gallons per minute of water. Approximately 50 percent of the wells tapping the Marshall Formation, the most reliable bedrock aquifer, can yield as much as 60 gallons per minute.Washtenaw County has sand and gravel deposits that are more than 50 feet thick. The deposits are mined in several areas and are of economic importance. In addition, there may be potential for peat production in the western part of the county and for clay production in the eastern part.

Gas-water-rock interactions in sedimentary basins: CO2 sequestration in the Frio Formation, Texas, USA

USGS Publications Warehouse

Kharaka, Y.K.; Cole, D.R.; Thordsen, J.J.; Kakouros, E.; Nance, H.S.

2006-01-01

To investigate the potential for the geologic storage of CO2 in saline sedimentary aquifers, 1600??ton of CO2 were injected at ???1500 m depth into a 24-m sandstone section of the Frio Formation - a regional reservoir in the US Gulf Coast. Fluid samples obtained from the injection and observation wells before, during and after CO2 injection show a Na-Ca-Cl type brine with 93,000??mg/L TDS and near saturation of CH4 at reservoir conditions. As injected CO2 gas reached the observation well, results showed sharp drops in pH (6.5 to 5.7), pronounced increases in alkalinity (100 to 3000??mg/L as HCO3) and Fe (30 to 1100??mg/L), and significant shifts in the isotopic compositions of H2O and DIC. Geochemical modeling indicates that brine pH would have dropped lower, but for buffering by dissolution of calcite and Fe oxyhydroxides. Post-injection results show the brine gradually returning to its pre-injection composition. ?? 2006 Elsevier B.V. All rights reserved.

Subsurface and petroleum geology of the southwestern Santa Clara Valley ("Silicon Valley"), California

USGS Publications Warehouse

Stanley, Richard G.; Jachens, Robert C.; Lillis, Paul G.; McLaughlin, Robert J.; Kvenvolden, Keith A.; Hostettler, Frances D.; McDougall, Kristin A.; Magoon, Leslie B.

2002-01-01

Gravity anomalies, historical records of exploratory oil wells and oil seeps, new organic-geochemical results, and new stratigraphic and structural data indicate the presence of a concealed, oil-bearing sedimentary basin beneath a highly urbanized part of the Santa Clara Valley, Calif. A conspicuous isostatic-gravity low that extends about 35 km from Palo Alto southeastward to near Los Gatos reflects an asymmetric, northwest-trending sedimentary basin comprising low-density strata, principally of Miocene age, that rest on higher-density rocks of Mesozoic and Paleogene(?) age. Both gravity and well data show that the low-density rocks thin gradually to the northeast over a distance of about 10 km. The thickest (approx 4 km thick) accumulation of low-density material occurs along the basin's steep southwestern margin, which may be controlled by buried, northeast-dipping normal faults that were active during the Miocene. Movement along these hypothetical normal faults may been contemporaneous (approx 17–14 Ma) with sedimentation and local dacitic and basaltic volcanism, possibly in response to crustal extension related to passage of the northwestward-migrating Mendocino triple junction. During the Pliocene and Quaternary, the normal faults and Miocene strata were overridden by Mesozoic rocks, including the Franciscan Complex, along northeastward-vergent reverse and thrust faults of the Berrocal, Shannon, and Monte Vista Fault zones. Movement along these fault zones was accompanied by folding and tilting of strata as young as Quaternary and by uplift of the modern Santa Cruz Mountains; the fault zones remain seismically active. We attribute the Pliocene and Quaternary reverse and thrust faulting, folding, and uplift to compression caused by local San Andreas Fault tectonics and regional transpression along the Pacific-North American Plate boundary. Near the southwestern margin of the Santa Clara Valley, as many as 20 exploratory oil wells were drilled between 1891 and 1929 to total depths as great as 840 m. At least one pump unit is still standing. Although no lithologic or paleontologic samples are available from the wells, driller's logs indicate the presence of thick intervals of brown shale and sandstone resembling nearby outcrops of the Miocene Monterey Formation. Small amounts of oil and gas were observed in several wells, but commercial production was never established. Oil from the Peck well in Los Gatos is highly biodegraded, contains biomarkers commonly found in oils derived from the Monterey Formation, and has a stable-C-isotopic (d13C) composition of –23.32 permil, indicating derivation from a Miocene Monterey Formation source rock. Preliminary calculations suggest that about 1 billion barrels of oil may have been generated from source rocks within the Monterey Formation in the deepest part of the subsurface sedimentary basin between Los Gatos and Cupertino. Most of this oil was probably lost to biodegradation, oxidation, and leakage to the surface, but some oil may have accumulated in as-yet-undiscovered structural and stratigraphic traps along the complex structural boundary between the Santa Clara Valley and the Santa Cruz Mountains. Although some of these undiscovered accumulations of oil may be of commercial size, future petroleum exploration is unlikely because most of the area is currently devoted to residential, recreational, commercial, and industrial uses.

Exploring Archean seawater sulfate via triple S isotopes in carbonate associated sulfate.

NASA Astrophysics Data System (ADS)

Paris, G.; Fischer, W. W.; Sessions, A. L.; Adkins, J. F.

2015-12-01

Multiple sulfur isotope ratios in Archean sedimentary rocks provide powerful insights into the behavior of the ancient sulfur cycle, the redox state of fluid Earth, and the timing of the rise of atmospheric oxygen [1]. The Archean sulfur isotope record is marked by pronounced mass-independent fractionation (Δ33S≠0)—signatures widely interpreted as the result of SO2 photolysis from "short-wavelength" UV light resulting in a reduced phase carrying positive Δ33S values (ultimately recorded in pyrite) and an oxidized phase carrying negative Δ33S values carried by sulfate [2]. Support for this hypothesis rests on early laboratory experiments and observations of negative Δ33S from barite occurrences in mixed volcanic sedimentary strata in Mesoarchean greenstone terrains. Despite forming the framework for understanding Archean sulfur cycle processes, this hypothesis is still largely untested, notably due to the lack of sulfate minerals in Archean strata. Using a new MC-ICP-MS approach combined with petrography and X-ray spectroscopy we have generated a growing S isotope dataset from CAS extracted from Archean carbonates from a range of sedimentary successions, including: the 2.6 to 2.521 Ga Campbellrand-Malmani carbonate platform (Transvaal Supergroup, South Africa), 2.7 Ga Cheshire Formation (Zimbabwe), and 2.9 Ga Steep Rock Formation (Canada). Importantly, we observe positive δ34S and Δ33S values across a range of different lithologies and depositional environments. These results demonstrate that dissolved sulfate in seawater was characterized by positive Δ33S values—a result that receives additional support from recent laboratory and theoretical experiments [e.g. 4, 5]. [1] Farquhar et al., 2000, Science [2] Farquhar et al., 2001, Journal of Geophysical Research: Planets [3] Paris et al., 2014, Science. [4] Whitehill et al., 2013, Proceedings of the National Academy of Sciences. [5] Claire et al., 2014 Geochimica et Cosmochimica Acta

Tectonic evolution of the Anadyr Basin, northeastern Eurasia, and its petroleum resource potential

NASA Astrophysics Data System (ADS)

Antipov, M. P.; Bondarenko, G. E.; Bordovskaya, T. O.; Shipilov, E. V.

2009-09-01

The published data on the sedimentation conditions, structure, and tectonic evolution of the Anadyr Basin in the Mesozoic and Cenozoic are reviewed. These data are re-examined in the context of modern tectonic concepts concerning the evolution of the northwestern Circum-Pacific Belt. The re-examination allows us not only to specify the regional geology and tectonic history, but also to forecast of the petroleum resource potential of the sedimentary cover based on a new concept. The sedimentary cover formation in the Anadyr Basin is inseparably linked with the regional tectonic evolution. The considered portion of the Chukchi Peninsula developed in the Late Mesozoic at the junction of the ocean-type South Anyui Basin, the Asian continental margin, and convergent zones of various ages extending along the Asia-Pacific interface. Strike-slip faulting and pulses of extension dominated in the Cenozoic largely in connection with oroclinal bending of structural elements pertaining to northeastern Eurasia and northwestern North America against the background of accretion of terranes along the zone of convergence with the Pacific oceanic plates. Three main stages are recognized in the formation of the sedimentary cover in the Anadyr Basin. (1) The lower portion of the cover was formed in the Late Cretaceous-Early Eocene under conditions of alternating settings of passive and active continental margins. The Cenomanian-lower Eocene transitional sedimentary complex is located largely in the southern Anadyr Basin (Main River and Lagoonal troughs). (2) In the middle Eocene and Oligocene, sedimentation proceeded against the background of extension and rifting in the northern part of the paleobasin and compression in its southern part. The compression was caused by northward migration of the foredeep in front of the accretionary Koryak Orogen. The maximum thickness of the Eocene-Oligocene sedimentary complex is noted mainly in the southern part of the basin and in the Central and East Anadyr troughs. (3) The middle Miocene resumption of sedimentation was largely related to strike-slip faulting and rifting. In the Miocene to Quaternary, sedimentation was the most intense in the central and northern parts of the Anadyr Basin, as well as in local strike-slip fault-line depressions of the Central Trough. Geological and geophysical data corroborate thrusting in the southern Anadyr Basin. The amplitude of thrusting over the Main River Trough reaches a few tens of kilometers. The vertical thickness of the tectonically screened Paleogene and Neogene rocks in the southern Main River Trough exceeds 10 km. The quantitative forecast of hydrocarbon emigration from Cretaceous and Paleogene source rocks testifies to the disbalance between hydrocarbons emigrated and accumulated in traps of petroleum fields discovered in the Anadyr Basin. The southern portion of the Anadyr Basin is the most promising for the discovery of new petroleum fields in the Upper Cretaceous, Eocene, and Upper Oligocene-Miocene porous and fracture-porous reservoir rocks in subthrust structural and lithological traps.

Density and velocity relationships for digital sonic and density logs from coastal Washington and laboratory measurements of Olympic Peninsula mafic rocks and greywackes

USGS Publications Warehouse

Brocher, Thomas M.; Christensen, Nikolas I.

2001-01-01

Three-dimensional velocity models for the basins along the coast of Washington and in Puget Lowland provide a means for better understanding the lateral variations in strong ground motions recorded there. We have compiled 16 sonic and 18 density logs from 22 oil test wells to help us determine the geometry and physical properties of the Cenozoic basins along coastal Washington. The depth ranges sampled by the test-well logs fall between 0.3 and 2.1 km. These well logs sample Quaternary to middle Eocene sedimentary rocks of the Quinault Formation, Montesano Formation, and Hoh rock assemblage. Most (18 or 82%) of the wells are from Grays Harbor County, and many of these are from the Ocean City area. These Grays Harbor County wells sample the Quinault Formation, Montesano Formation, and frequently bottom in the Hoh rock assemblage. These wells show that the sonic velocity and density normally increase significantly across the contacts between the Quinault or the Montesano Formations and the Hoh rock assemblage. Reflection coefficients calculated for vertically traveling compressional waves from the average velocities and densities for these units suggest that the top of the Hoh rock assemblage is a strong reflector of downward-propagating seismic waves: these reflection coefficients lie between 11 and 20%. Thus, this boundary may reflect seismic energy upward and trap a substantial portion of the seismic energy generated by future earthquakes within the Miocene and younger sedimentary basins found along the Washington coast. Three wells from Jefferson County provide data for the Hoh rock assemblage for the entire length of the logs. One well (Eastern Petroleum Sniffer Forks #1), from the Forks area in Clallam County, also exclusively samples the Hoh rock assemblage. This report presents the locations, elevations, depths, stratigraphic, and other information for all the oil test wells, and provides plots showing the density and sonic velocities as a function of depth for each well log. We also present two-way traveltimes for 15 of the wells calculated from the sonic velocities. Average velocities and densities for the wells having both logs can be reasonably well related using a modified Gardner’s rule, with p=1825v1/4, where p is the density (in kg/m3) and v is the sonic velocity (in km/s). In contrast, a similar analysis of published well logs from Puget Lowland is best matched by a Gardner’s rule of p=1730v1/4, close to the p=1740v1/4 proposed by Gardner et al. (1974). Finally, we present laboratory measurements of compressional-wave velocity, shear-wave velocity, and density for 11 greywackes and 29 mafic rocks from the Olympic Peninsula and Puget Lowland. These units have significance for earthquake-hazard investigations in Puget Lowland as they dip eastward beneath the Lowland, forming the “bedrock” beneath much of the lowland. Average Vp/Vs ratios for the mafic rocks, mainly Crescent Formation volcanics, lie between 1.81 and 1.86. Average Vp/Vs ratios for the greywackes from the accretionary core complex in the Olympic Peninsula show greater scatter but lie between 1.77 and 1.88. Both the Olympic Peninsula mafic rocks and greywackes have lower shear-wave velocities than would be expected for a Poisson solid (Vp/Vs=1.732). Although the P-wave velocities and densities in the greywackes can be related by a Gardner’s rule of p=1720v1/4, close to the p=1740v1/4 proposed by Gardner et al. (1974), the velocities and densities of the mafic rocks are best related by a Gardner’s rule of p=1840v1/4. Thus, the density/velocity relations are similar for the Puget Lowland well logs and greywackes from the Olympic Peninsula. Density/velocity relations are similar for the Washington coastal well logs and mafic rocks from the Olympic Peninsula, but differ from those of the Puget Lowland well logs and greywackes from the Olympic Peninsula.

[Micro-area characteristics of laminated chert in the volcanic rocks of Xionger Group of Ruyang area and its geological significances].

PubMed

Luo, An; Li, Hong-zhong; Zhao, Ming-zhen; Yang, Zhi-jun; Liang, Jin; He, Jun-guo

2014-12-01

The Xionger Group was originated from the volcanic eruption and sedimentation in Precambrian, whose sedimentary strata at the top were named Majiahe Formation. In the Majiahe Formation, there were hydrothermal chert widely distributed, which were exhibited to be interlayers in the volcanic rocks. The polarized microscope, X-ray diffraction (XRD), Raman and electron back scatter diffraction (EBSD) were conducted to study the characteristics in micro area of the jasperite samples, which were from the sedimentary interlayers in the volcanic rocks of Majiahe Formation in Xionger Group. As shown in the microphotographs and EBSD images, the quartz in the chert had small grain size, low degree of crystallinity and close packed structure, which quite agreed with the characteristics of hydrothermal sedimentary chert. In the chert of Xionger Group, there were clear banded (or lamellar) structures which were contributed by the diversities of the grain size and mineral composition. The different bands (or lamellars) had alternative appearance repeatedly, and denoted the diversities and periodic changes in the substance supply during the precipitation. According to the results of the XRD analysis, the majority minerals of the chert was low temperature quartz, whose lattice parameters were a=b=0.4913 nm, c=0.5405 nm and Z=3. As denoted in the EBSD image and result of Raman analysis, several impurity minerals were formed in the chert in different stages, whose geneses and formation time were quite different. The clay minerals and pyrite were scattered in distribution, and should be contributed by the original sedimentation. On contrary, the felsic minerals and mafic silicate minerals were originated from the sedimentation of tuffaceous substance during the volcanic eruption. The minerals of volcanic genesis had relatively larger grain size, and they deposited together with the hydrothermal sediments to form the bands (or lamellars) of coarse minerals. However, the hydrothermal sedimentation contributed to the bands (or lamellars) with minerals of much smaller grain size, which therefore resulted in diversities from the other bands (or lamellars). According to this, the repeated bands (or lamellars) denoted the volcanic activities were cyclic during the formation of the chert. What's more, the carbonate vein came from the precipitation of subsequent hydrothermal fluids in the fracture of the chert, which contributed to the changes (e. g. rising in crystallinity degree of silica and formation of micro-structure of new silicate) near the interface between chert and the carbonate vein. Although there were many impurity minerals with complex genesis, the relatively lower content of silica in the chert of Xionger Group was due to the volcanic mineral mainly. Since there were impurity minerals of volcanic genesis in relatively large amount, the content of silica in the chert of Xionger Group was hence relatively low. In this study, the Raman analysis was witnessed to be an effective way in the researches on the chert, and could open out the type of mineral, micro-structure and degrees of crystallinity (or order). These characteristics were well kept in the micro-area, and played significant roles to reflect and understand the formation mechanism and subsequent evolution of the chert.

Organic geochemistry, lithology, and paleontology of Tertiary and Mesozoic rocks from wells on the Alaska Peninsula

USGS Publications Warehouse

McLean, Hugh James

1977-01-01

Core chips and drill cuttings from eight of the nine wells drilled along the Bering Sea lowlands of the Alaska Peninsula were subjected to lithologic and paleontologic analyses. Results suggest that at least locally, sedimentary rocks of Tertiary age contain oil and gas source and reservoir rocks capable of generating and accumulating liquid and gas hydrocarbons. Paleogene strata rich in organic carbon are immature. However, strata in offshore basins to the north and south may have been subjected to a more productive thermal environment. Total organic carbon content of fine grained Neogene strata appears to be significantly lower than in Paleogene rocks, possibly reflecting nonmarine or brackish water environments of deposition. Neogene sandstone beds locally yield high values of porosity and permeability to depths of about 8,000 feet (2,439 m). Below this depth, reservoir potential rapidly declines. The General Petroleum, Great Basins No. 1 well drilled along the shore of Bristol Bay reached granitic rocks. Other wells drilled closer to the axis of the present volcanic arc indicate that both Tertiary and Mesozoic sedimentary rocks have been intruded by dikes and sills of andesite and basalt. Although the Alaska Peninsula has been the locus of igneous activity throughout much of Mesozoic and Tertiary time, thermal maturity indicators such as vitrinite reflectance and coal rank suggest, that on a regional scale, sedimentary rocks have not been subjected to abnormally high geothermal gradients.

Sedimentary records of the Yangtze Block (South China) and their correlation with equivalent Neoproterozoic sequences on adjacent continents

NASA Astrophysics Data System (ADS)

Wang, Wei; Zhou, Mei-Fu

2012-07-01

The Neoproterozoic Danzhou Group, composed of siliciclastic sedimentary rocks interbedded with minor carbonate and volcanic rocks in the southeastern Yangtze Block, South China, is thought to be related to the breakup of Rodinia. Detrital zircon ages constrain the deposition of the Danzhou Group at ~ 770 Ma and ~ 730 Ma. The Danzhou Group contains dominant Neoproterozoic detrital zircon grains (~ 740-900 Ma) with two major age groups at ~ 740-790 Ma and ~ 810-830 Ma, suggesting the detritus was largely sourced from the widely distributed Neoproterozoic igneous plutons within the Yangtze Block. The sedimentary rocks from the lower Danzhou Group, including sandstones, siltstone and pelitic rocks, have UCC-like chemical signatures, representing mixed products of primary sources. The upper Danzhou Group received more recycled materials because the rocks have relatively higher Zr/Sc ratios, Hf contents and a greater influx of Pre-Neoproterozoic zircons. All of the rocks have high La/Sc, low Sc/Th and Co/Th ratios, consistent with sources dominantly composed of granitic to dioritic end-members from the western and northwestern Yangtze Block. Chemical compositions do not support significant contributions of mafic components. Most Neoproterozoic zircons have positive ɛHf(t) (0-17) indicative of sediments derived mainly from the western and northwestern Yangtze Block. The uni-modal Neoproterozoic zircons and felsic igneous source rocks for the Danzhou Group suggest that the Yangtze Block was an independent continent in the peripheral part of Rodinia.

Subsurface Formation Evaluation on Mars: Application of Methods from the Oil Patch

NASA Astrophysics Data System (ADS)

Passey, Q. R.

2006-12-01

The ability to drill 10- to 100-meter deep wellbores on Mars would allow for evaluation of shallow subsurface formations enabling the extension of current interpretations of the geologic history of this planet; moreover, subsurface access is likely to provide direct evidence to determine if water or permafrost is present. Methodologies for evaluating sedimentary rocks using drill holes and in situ sample and data acquisition are well developed here on Earth. Existing well log instruments can measure K, Th, and U from natural spectral gamma-ray emission, compressional and shear acoustic velocities, electrical resistivity and dielectric properties, bulk density (Cs-137 or Co-60 source), photoelectric absorption of gamma-rays (sensitive to the atomic number), hydrogen index from epithermal and thermal neutron scattering and capture, free hydrogen in water molecules from nuclear magnetic resonance, formation capture cross section, temperature, pressure, and elemental abundances (C, O, Si, Ca, H, Cl, Fe, S, and Gd) using 14 MeV pulsed neutron activation more elements possible with supercooled Ge detectors. Additionally, high-resolution wellbore images are possible using a variety of optical, electrical, and acoustic imaging tools. In the oil industry, these downhole measurements are integrated to describe potential hydrocarbon reservoir properties: lithology, mineralogy, porosity, depositional environment, sedimentary and structural dip, sedimentary features, fluid type (oil, gas, or water), and fluid amount (i.e., saturation). In many cases it is possible to determine the organic-carbon content of hydrocarbon source rocks from logs (if the total organic carbon content is 1 wt% or greater), and more accurate instruments likely could be developed. Since Martian boreholes will likely be drilled without using opaque drilling fluids (as generally used in terrestrial drilling), additional instruments can be used such as high resolution direct downhole imaging and other surface contact measurements (such as IR spectroscopy and x-ray fluorescence). However, such wellbores would require modification of some instruments since conventional drilling fluids often provide the coupling of the instrument sensors to the formation (e.g., sonic velocity and galvanic resistivity measurements). The ability to drill wellbores on Mars opens up new opportunities for exploration but also introduces additional technical challenges. Currently it is not known if all existing terrestrial logging instruments can be miniaturized sufficiently for a shallow Mars wellbore, but the existing well logging techniques and instruments provide a solid framework on which to build a Martian subsurface evaluation program.

Geologic map of the Nelson quadrangle, Lewis and Clark County, Montana

USGS Publications Warehouse

Reynolds, Mitchell W.; Hays, William H.

2003-01-01

The geologic map of the Nelson quadrangle, scale 1:24,000, was prepared as part of the Montana Investigations Project to provide new information on the stratigraphy, structure, and geologic history of an area in the geologically complex southern part of the Montana disturbed belt. In the Nelson area, rocks ranging in age from Middle Proterozoic through Cretaceous are exposed on three major thrust plates in which rocks have been telescoped eastward. Rocks within the thrust plates are folded and broken by thrust faults of smaller displacement than the major bounding thrust faults. Middle and Late Tertiary sedimentary and volcaniclastic rocks unconformably overlie the pre-Tertiary rocks. A major normal fault displaces rocks of the western half of the quadrangle down on the west with respect to strata of the eastern part. Alluvial and terrace gravels and local landslide deposits are present in valley bottoms and on canyon walls in the deeply dissected terrain. Different stratigraphic successions are exposed at different structural levels across the quadrangle. In the northeastern part, strata of the Middle Cambrian Flathead Sandstone, Wolsey Shale, and Meagher Limestone, the Middle and Upper Cambrian Pilgrim Formation and Park Shale undivided, the Devonian Maywood, Jefferson, and lower part of the Three Forks Formation, and Lower and Upper Mississippian rocks assigned to the upper part of the Three Forks Formation and the overlying Lodgepole and Mission Canyon Limestones are complexly folded and faulted. These deformed strata are overlain structurally in the east-central part of the quadrangle by a succession of strata including the Middle Proterozoic Greyson Formation and the Paleozoic succession from the Flathead Sandstone upward through the Lodgepole Limestone. In the east-central area, the Flathead Sandstone rests unconformably on the middle part of the Greyson Formation. The north edge, northwest quarter, and south half of the quadrangle are underlain by a succession of rocks that includes not only strata equivalent to those of the remainder of the quadrangle, but also the Middle Proterozoic Newland, Greyson, and Spokane Formations, Pennsylvanian and Upper Mississippian Amsden Formation and Big Snowy Group undivided, the Permian and Pennsylvanian Phosphoria and Quadrant Formations undivided, the Jurassic Ellis Group and Lower Cretaceous Kootenai Formation. Hornblende diorite sills and irregular bodies of probable Late Cretaceous age intrude Middle Proterozoic, Cambrian and Devonian strata. No equivalent intrusive rocks are present in structurally underlying successions of strata. In this main part of the quadrangle, the Flathead Sandstone cuts unconformably downward from south to north across the Spokane Formation into the upper middle part of the Greyson Formation. Tertiary (Miocene?) strata including sandstone, pebble and cobble conglomerate, and vitric crystal tuff underlie, but are poorly exposed, in the southeastern part of the quadrangle where they are overlain by late Tertiary and Quaternary gravel. The structural complexity of the quadrangle decreases from northeast to southwest across the quadrangle. At the lowest structural level (Avalanche Butte thrust plate) exposed in the canyon of Beaver Creek, lower and middle Paleozoic rocks are folded in northwest-trending east-inclined disharmonic anticlines and synclines that are overlain by recumbently folded and thrust faulted Devonian and Mississippian rocks. The Mississippian strata are imbricated adjacent to the recumbent folds. In the east-central part of the quadrangle, a structurally overlying thrust plate, likely equivalent to the Hogback Mountain thrust plate of the Hogback Mountain quadrangle adjacent to the east (Reynolds, 20xx), juxtaposes recumbently folded Middle Proterozoic and unconformably overlying lower Paleozoic rocks on the complexly folded and faulted rocks of the Avalanche Butte thrust plate. The highest structural plate, bounded below

Calcium Sulfates at Gale Crater and Limitations on Gypsum Stability

NASA Technical Reports Server (NTRS)

Vantiman, D. T.; Martinez, G. M.; Rampe, E. B.; Bristow, T. F.; Blake, D. F.; Yen, A. H.; Ming, D. W.; Rapin, W.; Meslin, P. -Y.; Morookian, J. M.;

Ancient Martian aeolian processes and palaeomorphology reconstructed from the Stimson formation on the lower slope of Aeolis Mons, Gale crater, Mars

USGS Publications Warehouse

Banham, Steve G.; Gupta, Sanjeev; Rubin, David M.; Watkins, Jessica A.; Sumner, Dawn Y.; Edgett, Kenneth S.; Grotzinger, John P.; Lewis, Kevin W.; Edgar, Lauren; Stack, Kathryn M.; Barnes, Robert; Bell, Jame F. III; Day, Mackenzie D.; Ewing, Ryan C.; Lapotre, Mathieu G.A.; Stein, Nathan T.; Rivera-Hernandez, Frances; Vasavada, Ashwin R.

2018-01-01

Reconstruction of the palaeoenvironmental context of Martian sedimentary rocks is central to studies of ancient Martian habitability and regional palaeoclimate history. This paper reports the analysis of a distinct aeolian deposit preserved in Gale crater, Mars, and evaluates its palaeomorphology, the processes responsible for its deposition, and its implications for Gale crater geological history and regional palaeoclimate. Whilst exploring the sedimentary succession cropping out on the northern flank of Aeolis Mons, Gale crater, the Mars Science Laboratory rover Curiosity encountered a decametre‐thick sandstone succession, named the Stimson formation, unconformably overlying lacustrine deposits of the Murray formation. The sandstone contains sand grains characterized by high roundness and sphericity, and cross‐bedding on the order of 1 m in thickness, separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops. The cross‐beds are composed of uniform thickness cross‐laminations interpreted as wind‐ripple strata. Cross‐sets are separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops that are interpreted as dune migration surfaces. Grain characteristics and presence of wind‐ripple strata indicate deposition of the Stimson formation by aeolian processes. The absence of features characteristic of damp or wet aeolian sediment accumulation indicate deposition in a dry aeolian system. Reconstruction of the palaeogeomorphology suggests that the Stimson dune field was composed largely of simple sinuous crescentic dunes with a height of ca10 m, and wavelengths of ca 150 m, with local development of complex dunes. Analysis of cross‐strata dip‐azimuths indicates that the general dune migration direction and hence net sediment transport was towards the north‐east. The juxtaposition of a dry aeolian system unconformably above the lacustrine Murray formation represents starkly contrasting palaeoenvironmental and palaeoclimatic conditions. Stratigraphic relationships indicate that this transition records a significant break in time, with the Stimson formation being deposited after the Murray formation and stratigraphically higher Mount Sharp group rocks had been buried, lithified and subsequently eroded.

Clay alteration and gold deposition in the genesis and blue star deposits, Eureka County, Nevada

USGS Publications Warehouse

Drews-Armitage, S. P.; Romberger, S.B.; Whitney, C.G.

1996-01-01

The Genesis and Blue Star sedimentary rock-hosted gold deposits occur within the 40-mile-long Carlin trend and are located in Eureka County, Nevada. The deposits are hosted within the Devonian calcareous Popovich Formation, the siliciclastic Rodeo Creek unit and the siliciclastic Vinini Formation. The host rocks have undergone contact metamorphism, decalcification, silicification, argillization, and supergene oxidation. Detailed characterization of the alteration patterns, mineralogy, modes of occurrence, and associated geochemistry of clay minerals resulted in the following classifications: least altered rocks, found distal to the orebody, consisting of both metamorphosed and unmetamorphosed host rock that has not been completely decalcified; and altered rocks, found proximal to the orebody that have been decalcified. Altered rocks are classified further into the following groups based on clay mineral content: silicic, 1 to 10 percent clay; silicicargillic, 10 to 35 percent clay; and argillic, 35 to 80 percent clay. Clay species identified are 1M illite, 2M1 illite, kaolinite, halloysite, and dioctahedral smectite. An early hydrothermal event resulted in the precipitation of euhedral kaolinite and at least one generation of silica. This event occurred contemporaneously with decalcification which increased rock permeability and porosity. A second clay alteration event resulted in the precipitation of hydrothermal 1M illite which replaced hydrothermal kaolinite and is associated with gold deposition. Silver and silica deposition is also associated with this phase of hydrothermal alteration. Hydrothermal alteration was followed by supergene alteration which resulted in the formation of supergene kaolinite, halloysite, and smectite as well as the oxidation of iron-bearing minerals. Supergene clays are concentrated along faults, dike margins, and within rocks containing carbonate. Gold mineralization is not associated with supergene clay minerals within the Genesis and Blue Star deposits. Rocks classified as silicic-argillic in the Popovich Formation represent the most significant gold host. Silicicargillic rocks commonly exhibit bedding-parallel alteration zones. This pattern of alteration indicates that stratigraphy as well as northwest-trending structures played a significant role in the migration of gold-bearing fluids. Based on K-Ar age determinations of hydrothermal 1M illite associated with gold, the main event of mineralization in the Genesis and Blue Star deposits occurred between 93 and 100 Ma, during mid-Cretaceous time.

Digital Rock Physics of hydrate-bearing sediments: Determination of effective elastic properties on the microscale

NASA Astrophysics Data System (ADS)

Sell, Kathleen; Saenger, Erik H.; Quintal, Beatriz; Enzmann, Frieder; Kersten, Michael

2017-04-01

To date, very little is known about the distribution of natural gas hydrates in sedimentary matrices and its influence on the seismic properties of the host rock, in particular at low hydrate concentration. Digital rock physics offers a unique approach to this issue yet requires good quality, high resolution 3D representations for the accurate modelling of petrophysical and transport properties. Although such models are readily available via in-situ synchrotron radiation X-ray tomography the analysis of such data asks for complex workflows and high computational power to maintain valuable results. More recently digital rock physics took also on data from a fairly new group of techniques focused on in-situ studies recreating complex settings that cannot be easily accessed by conventional means. Here, we present a best-practise procedure complementing high-resolution synchrotron-tomography data of hydrate-bearing sedimentary matrices from Chaouachi et al. (2015) with data post-processing, including image enhancement and segmentation as well as exemplary numerical simulations of acoustic wave propagation in 3D on realistic rock using the derived results. A combination of the tomography and 3D modelling opens a path to a more reliable deduction of properties of gas hydrate bearing sediments without a reliance on idealised and frequently imprecise models (Sell et al. 2016). The advantage of this method over traditional, often oversimplified models lays in a more faithful description of complex pore geometries and microstructures found in natural formations (Andrä et al., 2013b, a). References: Chaouachi, M., Falenty, A., Sell, K., Enzmann, F., Kersten, M., Haberthür, D., and Kuhs, W. F.: Microstructural evolution of gas hydrates in sedimentary matrices observed with synchrotron x-ray computed tomographic microscopy, Geochem. Geophy. Geosy., 16, 1711-1722, 2015. Sell, K., E. H. Saenger, A. Falenty, M. Chaouachi, D. Haberthür, F. Enzmann, W. F. Kuhs, and M. Kersten: On the path to the digital rock physics of gas hydrate-bearing sediments - processing of in situ synchrotron-tomography data, Solid Earth, 7(4), 1243-1258, 2016. Andrä, H., Combaret, N., Dvorkin, J., Glatt, E., Han, J., Kabel, M., Keehm, Y., Krzikalla, F., Lee, M., Madonna, C., Marsh, M., Mukerji, T., Saenger, E. H., Sain, R., Saxena, N., Ricker, S., Wiegmann, A., and Zhan, X.: Digital rock physics benchmarks - Part II: Computing effective properties, Comput. Geosci., 50, 33-43, 2013a. Andrä, H., Combaret, N., Dvorkin, J., Glatt, E., Han, J., Kabel, M., Keehm, Y., Krzikalla, F., Lee, M., Madonna, C., Marsh, M., Mukerji, T., Saenger, E. H., Sain, R., Saxena, N., Ricker, S., Wiegmann, A., and Zhan, X.: Digital rock physics benchmarks - Part I: Imaging and segmentation, Comput. Geosci., 50, 25-32, 2013b.

Sedimentary Signs of a Martian Lakebed

NASA Image and Video Library

2014-12-08

This evenly layered rock photographed by the Mast Camera Mastcam on NASA Curiosity Mars Rover on Aug. 7, 2014, shows a pattern typical of a lake-floor sedimentary deposit not far from where flowing water entered a lake.

Microbially induced sedimentary structures recording an ancient ecosystem in the ca. 3.48 billion-year-old Dresser Formation, Pilbara, Western Australia.

PubMed

Noffke, Nora; Christian, Daniel; Wacey, David; Hazen, Robert M

2013-12-01

Microbially induced sedimentary structures (MISS) result from the response of microbial mats to physical sediment dynamics. MISS are cosmopolitan and found in many modern environments, including shelves, tidal flats, lagoons, riverine shores, lakes, interdune areas, and sabkhas. The structures record highly diverse communities of microbial mats and have been reported from numerous intervals in the geological record up to 3.2 billion years (Ga) old. This contribution describes a suite of MISS from some of the oldest well-preserved sedimentary rocks in the geological record, the early Archean (ca. 3.48 Ga) Dresser Formation, Western Australia. Outcrop mapping at the meter to millimeter scale defined five sub-environments characteristic of an ancient coastal sabkha. These sub-environments contain associations of distinct macroscopic and microscopic MISS. Macroscopic MISS include polygonal oscillation cracks and gas domes, erosional remnants and pockets, and mat chips. Microscopic MISS comprise tufts, sinoidal structures, and laminae fabrics; the microscopic laminae are composed of primary carbonaceous matter, pyrite, and hematite, plus trapped and bound grains. Identical suites of MISS occur in equivalent environmental settings through the entire subsequent history of Earth including the present time. This work extends the geological record of MISS by almost 300 million years. Complex mat-forming microbial communities likely existed almost 3.5 billion years ago.

Map showing structure contours on the top of the upper Jurassic Morrison Formation, Powder River basin, Wyoming and Montana

USGS Publications Warehouse

Crysdale, B.L.

1991-01-01

This map is one in a series of U.S. Geological Survey Miscellaneous Field Studies (MF) maps showing computer-generated structure contours, isopachs, and cross sections of selected formations in the Powder River basin, Wyoming and Montana. The map and cross sections were constructed from information stored in a U.S. Geological Survey Evolution of Sedimentary Basins data base. This data base contains picks of geologic formation and (or) unit tops and bases determined from electric resistivity and gamma-ray logs of 8,592 wells penetrating Tertiary and older rocks in the Powder River basin. Well completion cards (scout tickets) were reviewed and compared with copies of all logs, and formation or unit contacts determined by N. M. Denson, D.L. Macke, R. R. Schumann and others. This isopach map is based on information from 2,429 of these wells that penetrate the Minnelusa Formation and equivalents.

Subcritical water extraction of organic matter from sedimentary rocks.

PubMed

Luong, Duy; Sephton, Mark A; Watson, Jonathan S

2015-06-16

Subcritical water extraction of organic matter containing sedimentary rocks at 300°C and 1500 psi produces extracts comparable to conventional solvent extraction. Subcritical water extraction of previously solvent extracted samples confirms that high molecular weight organic matter (kerogen) degradation is not occurring and that only low molecular weight organic matter (free compounds) are being accessed in analogy to solvent extraction procedures. The sedimentary rocks chosen for extraction span the classic geochemical organic matter types. A type I organic matter-containing sedimentary rock produces n-alkanes and isoprenoidal hydrocarbons at 300°C and 1500 psi that indicate an algal source for the organic matter. Extraction of a rock containing type II organic matter at the same temperature and pressure produces aliphatic hydrocarbons but also aromatic compounds reflecting the increased contributions from terrestrial organic matter in this sample. A type III organic matter-containing sample produces a range of non-polar and polar compounds including polycyclic aromatic hydrocarbons and oxygenated aromatic compounds at 300°C and 1500 psi reflecting a dominantly terrestrial origin for the organic materials. Although extraction at 300°C and 1500 psi produces extracts that are comparable to solvent extraction, lower temperature steps display differences related to organic solubility. The type I organic matter produces no products below 300°C and 1500 psi, reflecting its dominantly aliphatic character, while type II and type III organic matter contribute some polar components to the lower temperature steps, reflecting the chemical heterogeneity of their organic inventory. The separation of polar and non-polar organic compounds by using different temperatures provides the potential for selective extraction that may obviate the need for subsequent preparative chromatography steps. Our results indicate that subcritical water extraction can act as a suitable replacement for conventional solvent extraction of sedimentary rocks, but can also be used for any organic matter containing mineral matrix, including soils and recent sediments, and has the added benefit of tailored extraction for analytes of specific polarities. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

A Lithology Based Map Unit Schema For Onegeology Regional Geologic Map Integration

NASA Astrophysics Data System (ADS)

Moosdorf, N.; Richard, S. M.

2012-12-01

A system of lithogenetic categories for a global lithological map (GLiM, http://www.ifbm.zmaw.de/index.php?id=6460&L=3) has been compiled based on analysis of lithology/genesis categories for regional geologic maps for the entire globe. The scheme is presented for discussion and comment. Analysis of units on a variety of regional geologic maps indicates that units are defined based on assemblages of rock types, as well as their genetic type. In this compilation of continental geology, outcropping surface materials are dominantly sediment/sedimentary rock; major subdivisions of the sedimentary category include clastic sediment, carbonate sedimentary rocks, clastic sedimentary rocks, mixed carbonate and clastic sedimentary rock, colluvium and residuum. Significant areas of mixed igneous and metamorphic rock are also present. A system of global categories to characterize the lithology of regional geologic units is important for Earth System models of matter fluxes to soils, ecosystems, rivers and oceans, and for regional analysis of Earth surface processes at global scale. Because different applications of the classification scheme will focus on different lithologic constituents in mixed units, an ontology-type representation of the scheme that assigns properties to the units in an analyzable manner will be pursued. The OneGeology project is promoting deployment of geologic map services at million scale for all nations. Although initial efforts are commonly simple scanned map WMS services, the intention is to move towards data-based map services that categorize map units with standard vocabularies to allow use of a common map legend for better visual integration of the maps (e.g. see OneGeology Europe, http://onegeology-europe.brgm.fr/ geoportal/ viewer.jsp). Current categorization of regional units with a single lithology from the CGI SimpleLithology (http://resource.geosciml.org/201202/ Vocab2012html/ SimpleLithology201012.html) vocabulary poorly captures the lithologic character of such units in a meaningful way. A lithogenetic unit category scheme accessible as a GeoSciML-portrayal-based OGC Styled Layer Description resource is key to enabling OneGeology (http://oneGeology.org) geologic map services to achieve a high degree of visual harmonization.

Origins of chromite and magnetite in sedimentary rocks deposited in a shallow water environment in the 3.2 Ga Moodies Group, South Africa

NASA Astrophysics Data System (ADS)

Otake, T.; Sakamoto, Y.; Itoh, S.; Yurimoto, H.; Kakegawa, T.

2012-12-01

*Otake, T. totake@eng.hokudai.ac.jp Div. of Sustainable Resources Engineering, Hokkaido Univ., Sapporo, Japan Sakamoto, Y. yu.sakamoto12@gmail.com Dep. of Earth Science, Tohoku Univ., Sendai, Japan Itoh, S. sitoh@ep.sci.hokudai.ac.jp Dep. of Natural History Sciences, Hokkaido Univ., Sapporo, Japan Yurimoto. H. yuri@ep.sci.hokudai.ac.jp Dep. of Natural History Sciences, Hokkaido Univ., Sapporo, Japan Kakegawa, T. kakegawa@m.tohoku.ac.jp Dep. of Earth Science, Tohoku Univ., Sendai, Japan Geochemical data from ferruginous chemical sedimentary rocks (e.g., Banded Iron Formation: BIF) have been used to reconstruct the surface environments of early Earth. However, only a few studies have investigated the geochemical characteristics of BIFs deposited in a shallow water environment during the Archean, which may have differed from those deposited in a deep water environment. Therefore, we investigated geological, petrographic and geochemical characteristics of ferruginous rocks deposited in a shallow water environment in the Moodies group, in the Barberton Greenstone Belt, South Africa. We obtained ferruginous rock samples in the Moodies group from both an outcrop and underground gold mine, and compared the characteristics of these samples. The 70 sedimentary rock samples were divided into groups based on the dominant Fe minerals they contain: Hematite-rich jaspilite (HM group), Magnetite-rich iron formation/shale/sandstone (MT group), and Siderite-rich sandstone (SD group). Samples in the HM group are predominantly composed of fine-grained quartz (< 20 μm) and hematite (< 5 μm), which are interpreted to be chemical precipitates. Samples in the MT group contain quartz, magnetite, siderite, ankerite, chlorite, biotite and chromite. The grain size of magnetite is much larger (20-150 μm) than that of hematite in the HM group. The magnetite is interpreted as a secondary mineral transformed from hematite during early diagenesis. Results of in situ oxygen isotope analysis by SIMS showed that magnetite in the Moodies group has similar δ18O values to those in the least metamorphosed BIFs. All chromite observed in the MT group is overgrown by magnetite. Samples in the SD group contain quartz, siderite, chlorite, biotite, and chromite; the chromite is included in Mg-rich siderite or silicate minerals (e.g., chlorite and biotite). Oxygen isotope compositions indicate that chromite in both the MT and SD groups, was hydrothermally altered. Results of geochemical analyses of the bulk outcrop samples showed that FeTotal/Ti and Cr/Ti ratios of outcrop samples increase concordantly in the ferruginous zone, particularly in the MT group. The Cr/Ti ratios of the underground samples also increase with increasing the Fetotal/Ti ratios. On the other hand, Th/U ratios of both the outcrop and underground samples decrease with increasing FeTotal/Ti ratios. The correlations of Fetotal/Ti ratios with U/Th and Cr/Ti ratios indicate that dissolved Cr and U species in the ocean were coprecipitated with ferric (hydr)oxides during the formation of ferruginous rocks of the Moodies Group. These results suggest that Cr and U were chemically mobile, possibly as oxidized species, in the Earth's surface environment at ~3.2 Ga.

Finding of No Significant Impact: Military Family Housing Revitalization Project Nellis Air Force Base, Nevada

DTIC Science & Technology

2005-02-01

extent, plutonic rocks (all from the early Cenozoic Era). The sedimentary rocks are predominantly carbonates (limestone and dolomite), although there are...comprised of volcanic rocks, while the plutonic rocks also are exposed at a number of locations in the southern mountains (Longwell, et al., 1965

Ultrasonic constraint of the microfracture anisotropy of flysch rocks from the Podhale Synclinorium (Poland)

NASA Astrophysics Data System (ADS)

Kłopotowska, Agnieszka

2018-01-01

This paper attempts to show the relationship between joints observed in flysch formations in the field and microfracture fabrics invisible to the naked eye in hand specimens. Ultrasonic measurements demonstrate that the intensity and orientations of domains "memorised" by rock specimens are associated with the historical stresses within the rock mass rather than the rock lamination. The spatial orientations of these microfractures have been measured, and their dynamic-elastic properties have been found to correlate with the orientation of macroscopic joint sets measured in the field. The elastic properties measured vary because of sedimentary diagenetic processes that occured during the tectonic deformations of these flysch rocks in the Podhale Synclinorium of Poland. The structural discontinuities detected by ultrasonic measurements can be perceived as an incipient phase of the macroscopic joints already visible in the field and are attributed to the in situ residual tectonic stresses. Such historical stresses impart a hidden mechanical anisotropy to the entire flysch sequence. The microfractures will develop into macroscopic joints during future relaxation of the exposed rock mass. Understanding the nature and orientation of the invisible microfracture anisotropy that will become macroscopic in the future is vital for the safe and efficient engineering of any rock mass.

Biostratigraphy and petrography of upper Paleozoic rocks of Sierra Las Pintas, northern Baja California

NASA Astrophysics Data System (ADS)

Navas-Parejo, Pilar; Lara-Peña, R. Aaron; Torres-Martínez, Miguel Angel; Martini, Michelangelo

2018-07-01

A transported crinoid fauna is herein described for the first time in the Paleozoic succession cropping out in the Sierra Las Pintas, northern Baja California, northwestern Mexico. The fossil association includes Heterostelechus texanus Moore and Jeffords, Preptopremnum laeve? Moore and Jeffords, and Mooreanteris perforatus Moore and Jeffords, which indicates a Middle Pennsylvanian-early Permian time-averaged age. The studied area corresponds with the northernmost outcrop of definitely late Paleozoic deep-water facies in northwestern Mexico and the southern United States. Petrographic analyses indicate that the studied metasandstones were primarily derived from high-grade metamorphic rocks and from a shallow-water platform environment dominated by crinoid meadows. These results allow the correlation of the studied metasedimentary rocks with the Carboniferous Rancho Nuevo Formation of the Sonora allochthon, which crops out in central Sonora. The Sonora allochthon includes an Early Ordovician-Late Pennsylvanian sedimentary succession that was deposited in the oceanic basin located south of the Laurentian craton. Therefore, upper Paleozoic metasedimentary rocks of the Sierra Las Pintas were deposited along the same continental margin of Laurentia as those rocks in the Sonora allochthon, and were mostly derived from metamorphic rocks of the continental craton and by the typical Carboniferous encrinites, which characterize the shallow-water rocks of central and northern Sonora.

Cerium and Neodymium Isotope Fractionation in Geochemical Samples

NASA Astrophysics Data System (ADS)

Ohno, T.; Ishibashi, T.

2014-12-01

The study of naturally occurring isotopic variations of rare earth elements (REE) has a potentially significant influence in geochemical research fields with other traditional studies of REE. One of the key features of REE are their chemical similarities and gradual changes of ionic radius, which may make the isotopic variation of REE a potential tool to understand the mechanisms of isotopic fractionation in nature. Among the REE, geochemical and physicochemical features of Ce could be anomalous, because Ce could be present as the tetravalent (+IV) state as well as the common trivalent (+III) state of other REE. Since the oxidation state of Ce can change by reflecting the redox conditions of the environment, the measured differences in the degree of isotopic fractionation between Ce and other REE can provide unique information about the redox conditions. In this study, we developed a new analytical method to determine the mass-dependent isotopic fractionations of Ce and Nd in geochemical samples. The reproducibility of the isotopic ratio measurements on 142Ce/140Ce, 146Nd/144Nd and 148Nd/144Nd were 0.08‰ (2SD, n=25), 0.06‰ (2SD, n=39) and 0.12‰ (2SD, n=39), respectively. The present technique was applied to determine the variations of the Ce and Nd isotopic ratios for five geochemical reference materials (igneous rocks, JB-1a and JA-2; sedimentary rocks, JMn-1, JCh-1 and JDo-1). The resulting ratios for two igneous rocks (JB-1a and JA-2) and two sedimentary rocks (JMn-1 and JCh-1) did not vary significantly among the samples, whereas the Ce and Nd isotope ratios for the carbonate samples (JDo-1) were significantly higher than those for igneous and sedimentary rock samples. The 1:1 simple correlation between δ142Ce and δ146Nd indicates that there were no significant difference in the degree of isotopic fractionation between the Ce and Nd. This suggests that the isotopic fractionation for Ce found in the JDo-1 could be induced by physicochemical processes without changing the oxidation status of Ce, since the redox-reaction can produce larger isotopic fractionation than the reactions without changing the oxidation state. The variations in the Ce and Nd isotope ratios for geochemical samples could provide new information concerning the physico-chemical processes of the sample formation.

Diversity of Rock Compositions at Gale Crater Observed by ChemCam and APXS on Curiosity, and Comparison to Meteorite and Orbital Observations

NASA Astrophysics Data System (ADS)

Wiens, R. C.; Maurice, S.; Grotzinger, J. P.; Gellert, R.; Mangold, N.; Sautter, V.; Ollila, A.; Dyar, M. D.; Le Mouelic, S.; Ehlmann, B. L.; Clegg, S. M.; Lanza, N.; Cousin, A.; Forni, O.; Gasnault, O.; Lasue, J.; Blaney, D. L.; Newsom, H. E.; Herkenhoff, K. E.; Anderson, R. B.; D'Uston, L.; Bridges, N. T.; Fabre, C.; Meslin, P.; Johnson, J.; Vaniman, D.; Bridges, J.; Dromart, G.; Schmidt, M. E.; Team, M.

2013-12-01

Gale crater was selected as the Curiosity landing site because of the apparent sedimentary spectral signatures seen from orbit. Sedimentary materials on Mars have to this point showed very little expression of major element mobility, so compositions of precursor igneous minerals play a strong role in the compositions of sediments. In addition, pebbles and float rocks on Bradbury Rise (sols 0-50, > 324) appear to be mostly igneous in origin, and are assumed to have been carried down from the crater rim. Overall in the first year on Mars ChemCam obtained >75,000 LIBS spectra on > 2,000 observation points, supported by > 1,000 RMI images, and APXS obtained a significant number of observations. These show surprisingly variable compositions. The mean ChemCam compositions for Bradbury Rise dust-free rocks and pebbles (62 locations) give SiO2 = 56%, FeOT = 16% and show high alkalis consistent with Jake Matijevic (sol ~47) APXS Na2O ~6.6 wt%. ChemCam observations on the conglomerate Link (sol 27) gave Rb > 150 ppm and Sr > 1500 ppm. These compositions imply the presence of abundant alkali feldspars in the material infilling the lower parts of Gale crater. They are generally consistent with the more feldspar-rich SNC meteorites but show a radical departure from larger scale orbital observations, e.g., GRS, raising the question of how widespread these compositions are outside of Gale crater. Sedimentary materials at Yellowknife Bay encompassing the Sheepbed (sols 125-300) and Shaler (sols 121, 311-324) units, potentially including Point Lake (sols 301-310) and Rocknest (sols 57-97), appear to have incorporated varying amounts of igneous source materials. Seven rocks investigated at Rocknest show significant additions of Fe, with mean FeOT = 25% (154 locations), suggesting that FeO was a cementing agent. ChemCam observations at Shaler show varying amounts of alkali feldspar (i.e., related to Bradbury Rise), Fe-rich material (Rocknest-like), and potassium-rich material (related potentially to Bathurst, apparent bedrock observed sols 54-55, located stratigraphically between Bradbury and Rocknest). ChemCam observations in Yellowknife Bay formation rocks identified calcium-sulfate veins with varying amounts of hydration, as suggested by Mastcam multispectral observations. ChemCam also discovered Mg-rich raised ridges as a diagenetic feature occurring in the upper part of the Sheepbed member.

Regional hydrogeology of the Navajo and Hopi Indian reservations, Arizona, New Mexico, and Utah, with a section on vegetation

USGS Publications Warehouse

Cooley, M.E.; Harshbarger, J.W.; Akers, J.P.; Hardt, W.F.; Hicks, O.N.

1969-01-01

The Navajo and Hopi Indian Reservations have an area of about 25,000 square miles and are in the south-central part of the Colorado Plateaus physiographic province. The reservations are underlain by sedimentary rocks that range in age from Cambrian to Tertiary, but Permian and younger rocks are exposed in about 95 percent of the area. Igneous and metamorphic basement rocks of Precambrian age underlie the sedimentary rocks at depths ranging from 1,000 to 10,000 feet. Much of the area is mantled by thin alluvial, eolian, and terrace deposits, which mainly are 10 to 50 feet thick.The Navajo country was a part of the eastern shelf area of the Cordilleran geosyncline during Paleozoic and Early Triassic time and part of the southwestern shelf area of the Rocky Mountain geosyncline in Cretaceous time. The shelf areas were inundated frequently by seas that extended from the central parts of the geosynclines. As a result, complex intertonguing and rapid facies changes are prevalent in the sedimentary rocks and form some of the principal controls on the ground-water hydrology. Regional uplift beginning in Late Cretaceous time , destroyed. the Rocky Mountain geosyncline and formed the structural basius that influenced sedimentation and erosion throughout Cenozoic time.

Areal geology of the Little Cone quadrangle, Colorado

USGS Publications Warehouse

Bush, A.L.; Marsh, O.T.; Taylor, R.B.

1960-01-01

The Little Cone quadrangle includes an area of about 59 square miles in eastern San Miguel County in southwestern Colorado. The quadrangle contains features characteristic of both the Colorado Plateaus physiographic province and the San Juan Mountains, and it has been affected by geologic events and processes of two different geologic environments. The continental sedimentary rocks of the Cutler formation of Permian age are the oldest rocks exposed in the quadrangle. Deposition of the Cutler was followed by a long period of erosion and peneplanation. There is no marked angular discordance between the Cutler and the overlying Dolores formation in the Little Cone quadrangle, but there is in areas some tens of miles east and west of the quadrangle where some crustal warping took place. The continental sedimentary rocks of the Dolores formation of Late Triassic age are red beds that are similar in gross lithology to those of the Cutler. The Dolores formation is subdivided into five general units that persist throughout the quadrangle and for some tens of miles to the north, south, and east. A second long period of erosion followed deposition of the Dolores. The Entrada sandstone of Late Jurassic age overlies the Dolores formation, and is in turn overlain by the Wanakah formation, also of Late Jurassic age. The Wanakah consists of the Pony Express limestone member at the base, the Bilk Creek sandstone'member near the center, and a "marl" member at the top. The Morrison formation, which overlies the Wanakah, consists of the Salt Wash sandstone member in the lower part and the Brushy Basin shale member in the upper part. A period of erosion, probably of relatively short duration, followed deposition of the Brushy Basin member. The Burro Canyon formation of Early Cretaceous age occurs as discontinuous bodies that fill channels cut in the top of the Morrison formation. Deposition of the Burro Canyon formation was followed by another period of erosion, which in turn ended with deposition of the Dakota sandstone of Late Cretaceous age. The Dakota sandstone grades upward into the Mancos shale, also of Late Cretaceous age.The Paleozoic and Mesozoic formations were broadly folded during Laramide time as part of an orogeny of regional extent, and the San Juan Mountains area was uplifted as a broad dome. Extensive erosion followed deformation, and the Cretaceous rocks in the area of the Little Cone quadrangle and the Mesozoic and Paleozoic rocks eastward from the quadrangle were successively bevelled. The Telluride conglomerate of Oligocene(?) age was laid down on this surface. In the Little Cone quadrangle several hundred feet of the Telluride was deposited upon a considerable thickness (probably 3,000 feet or more) of the Mancos shale. At Telluride, about 12 miles east of the quadrangle, the Telluride conglomerate lies upon the Dolores formation. Volcanic rocks of Miocene (?) and Miocene age were deposited widely upon the Telluride conglomerate; at one time they had a thickness of probably 1,000 feet or more in the quadrangle. They have been eroded completely from the quadrangle, but are present in the San Miguel Mountains a few miles to the south and southeast.During the middle Tertiary, probably during the Miocene, the sedimentary rocks were cut by many igneous bodies. Four major rock types are represented; in decreasing order of abundance they are granogabbro, granodidrite, rhyolite(?), and microgabbro. The granogabbro is by far the most abundant, and it forms the Flat Top Peak plug, the Little Cone laccolith, several sills in the Dakota sandstone and the Mancos shale, and a few dikes. The granodiorite forms sills in the Dakota sandstone and the Mancos shale, and the rhyolite(?) forms a single major sill in the Dakota. The microgabbro forms dikes that cut rocks as young as the Mancos shale. Metamorphic effects adjacent to the intrusive bodies generally are restricted to baking that extends only a few feet out into the enclosing rocks; in many places no metamorphic effects are evident. The rocks in the Little Cone quadrangle were displaced along numerous faults in middle Tertiary time, probably after the igneous rocks were injected. All of the faults are normal, and have vertical or very steep dips. In part, the faults form two long and narrow northward- and northwestward-trending grabens that extend into the adjoining Placerville quadrangle to the north. The graben faults form two systems, one trending northward to northwestward, and the other trending northwestward, that are probably contemporaneous. Other faults trend eastward to northeastward; some of these appear to be related to the intrusion of the igneous rocks. At the end of the Tertiary, probably in the early Pleistocene, the general area was again uplifted and subjected to extensive erosion. The Mancos shale was stripped from the northern part of the Little Cone quadrangle, and in this part of the area, the upland surfaces formed on top of the Dakota sandstone were largely controlled by the geologic structure. During the Quaternary a basalt flow was erupted on Specie Mesa on a surface that cuts both the Mancos and the Dakota. The surface preserved beneath the flow has virtually the same position and slope as the adjacent present-day surfaces. Pleistocene deposits consist of (a) high-level or older drift that is unrelated to the present drainage systems and is correlated with the Cerro glacial stage of early Pleistocene age, and (b) younger drift and valley fill within the valleys of the present drainage systems that are correlated with the Durango or Wisconsin glacial stages and may represent both. Recent surficial, landslide, and spring deposits are also present. Within the Little Cone quadrangle and in the Placerville quadrangle to the north and the Gray Head quadrangle to the east, the Entrada sandstone of Late Jurassic age contains vanadium deposits with which are associated large but low-grade amounts of uranium. These deposits form a practically continuous layer about 10 miles long and 1 to 1% miles wide, and possibly a second layer of smaller dimensions. Placer gold deposits in terrace gravel and valley fill of Pleistocene age and in alluvium of Recent age contain the only other ores.

Geology and ground water in north-central Santa Cruz County, California

USGS Publications Warehouse

Johnson, Michael J.

1980-01-01

North-central Santa Cruz County is underlain mainly by folded sedimentary rocks of Tertiary and Cretaceous age that have been highly fractured by movements in the San Andreas fault system. Ground water is stored in fractures within shale and mudstone formations and in intergranular pore spaces within fine- to very fine-grained sandstone and siltstone formations. Fewer than 10% of the wells yield more than 15 gallons of water per minute. The water in most wells is moderately hard to very hard, is generally of a sodium bicarbonate or calcium bicarbonate type, and commonly has excessive concentrations of iron or manganese. Of the many geologic units in the study area, only the Purisima Formation of Pliocene age has the potential to sustain well yields greater than 100 gallons per minute. (USGS)

Hydrogeologic framework of the Wood River Valley aquifer system, south-central Idaho

USGS Publications Warehouse

Bartolino, James R.; Adkins, Candice B.

2012-01-01

The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Hailey, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system, which consists primarily of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on groundwater for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the groundwater resource. As part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the Wood River Valley, this report describes the hydrogeologic framework of the Wood River Valley aquifer system. Although most of the Wood River Valley aquifer system is composed of Quaternary-age sediments and basalts of the Wood River Valley and its tributaries, older igneous, sedimentary, or metamorphic rocks that underlie these Quaternary deposits also are used for water supply. It is unclear to what extent these rocks are hydraulically connected to the main part of Wood River Valley aquifer system and thus whether they constitute separate aquifers. Paleozoic sedimentary rocks in and near the study area that produce water to wells and springs are the Phi Kappa and Trail Creek Formations (Ordovician and Silurian), the Milligen Formation (Devonian), and the Sun Valley Group including the Wood River Formation (Pennsylvanian-Permian) and the Dollarhide Formation (Permian). These sedimentary rocks are intruded by granitic rocks of the Late Cretaceous Idaho batholith. Eocene Challis Volcanic Group rocks overlie all of the older rocks (except where removed by erosion). Miocene Idavada Volcanics are found in the southern part of the study area. Most of these rocks have been folded, faulted, and metamorphosed to some degree, thus rock types and their relationships vary over distance. Quaternary-age sediment and basalt compose the primary source of groundwater in the Wood River Valley aquifer system. These Quaternary deposits can be divided into three units: a coarse-grained sand and gravel unit, a fine-grained silt and clay unit, and a single basalt unit. The fine- and coarse-grained units were primarily deposited as alluvium derived from glaciation in the surrounding mountains and upper reaches of tributary canyons. The basalt unit is found in the southeastern Bellevue fan area and is composed of two flows of different ages. Most of the groundwater produced from the Wood River Valley aquifer system is from the coarse-grained deposits. The altitude of the pre-Quaternary bedrock surface in the Wood River Valley was compiled from about 1,000 well-driller reports for boreholes drilled to bedrock and about 70 Horizontal-to-Vertical Spectral Ratio (HVSR) ambient-noise measurements. The bedrock surface generally mimics the land surface by decreasing down tributary canyons and the main valley from north to south; it ranges from more than 6,700 feet in Baker Creek to less than 4,600 feet in the central Bellevue fan. Most of the south-central portion of the Bellevue fan is underlain by an apparent topographically closed area on the bedrock surface that appears to drain to the southwest towards Stanton Crossing. Quaternary sediment thickness ranges from less than a foot on main and tributary valley margins to about 350 feet in the central Bellevue fan. Hydraulic conductivity for 81 wells in the study area was estimated from well-performance tests reported on well-driller reports. Estimated hydraulic conductivity for 79 wells completed in alluvium ranges from 1,900 feet per day (ft/d) along Warm Springs Creek to less than 1 ft/d in upper Croy Canyon. A well completed in bedrock had an estimated hydraulic conductivity value of 10 ft/d, one well completed in basalt had a value of 50 ft/d, and three wells completed in the confined system had values ranging from 32 to 52 ft/d. Subsurface outflow of groundwater from the Wood River Valley aquifer system into the eastern Snake River Plain aquifer was estimated to be 4,000 acre-feet per year. Groundwater outflow beneath Stanton Crossing to the Camas Prairie was estimated to be 300 acre-feet per year.

Stromatolites at ~3,500 Myr and a greenstone-granite unconformity in the Zimbabwean Archaean

NASA Astrophysics Data System (ADS)

Orpen, J. L.; Wilson, J. F.

1981-05-01

Two controversial areas of geological endeavour are the establishment of the antiquity of life and the tectonic setting of greenstone sequences. We record here the recent discoveries in the Fort Victoria greenstone belt of stromatolites in limestones assigned to ~3,500 Myr (minimum age) Sebakwian Group rocks of the Rhodesian Archaean Craton within Zimbabwe, and a nearby outcrop of a thin sedimentary formation, basal to a thick ~2,700 Myr volcanic pile, resting with definite unconformity on ~3,500 Myr Mushandike Granite.

Database compilation for the geologic map of the San Francisco volcanic field, north-central Arizona

USGS Publications Warehouse

Bard, Joseph A.; Ramsey, David W.; Wolfe, Edward W.; Ulrich, George E.; Newhall, Christopher G.; Moore, Richard B.; Bailey, Norman G.; Holm, Richard F.

2016-01-08

The orignial geologic maps were prepared under the Geothermal Research Program of the U.S. Geological Survey as a basis for interpreting the history of magmatic activity in the volcanic field. The San Francisco field, which is largely Pleistocene in age, is in northern Arizona, just north of the broad transition zone between the Colorado Plateau and the Basin and Range province. It is one of several dominantly basaltic volcanic fields of the late Cenozoic age situated near the margin of the Colorado Plateau. The volcanic field contains rocks ranging in composition from basalt to rhyolite—the products of eruption through Precambrian basement rocks and approximately a kilometer of overlying, nearly horizontal, Paleozoic and Mesozoic sedimentary rocks. About 500 km3 of erupted rocks cover about 5,000 km2 of predominantly Permian and locally preserved Triassic sedimentary rocks that form the erosionally stripped surface of the Colorado Plateau in Northern Arizona.

Extensional deformation of the Guadalquivir Basin: rate of WSW-ward tectonic displacement from Upper Tortonian sedimentary rocks

NASA Astrophysics Data System (ADS)

Roldán, Francisco J.; Azañón, Jose Miguel; Rodríguez-Fernández, Jose; María Mateos, Rosa

2016-04-01

The Guadalquivir Basin (Upper Tortonian-Quaternary sedimentary infilling) has been considered the foreland basin of the Betic Orogen built up during its collision with the Sudiberian margin. The basin is currently restricted to its westernmost sector, in the Cadiz Gulf, because the Neogene-Quaternary uplift of the Betic Cordillera has produced the emersion of their central and eastern parts. The upper Tortonian chronostratigraphic unit is the oldest one and it was indistinctly deposited on the South Iberian paleomargin and the External units from the Betic Cordillera. However, these rocks are undeformed on the Sudiberian paleomargin while they are deeply affected by brittle deformation on the External Betic Zone. Outcrops of Upper Tortonian sedimentary rocks on External Betic Zone are severely fragmented showing allocthonous characters with regard to those located on the Sudiberian paleomargin. This post- Upper Tortonian deformation is not well known in the External Zones of the Cordillera where the most prominent feature is the ubiquity of a highly deformed tecto-sedimentary unit outcropping at the basement of the Guadalquivir sedimentary infilling. This tecto-sedimentary unit belongs to the Mass Wasting Extensional Complex (Rodríguez-Fernández, 2014) formed during the collision and westward migration of the Internal Zone of the Betic Cordillera (15-8,5 Ma). In the present work, we show an ensemble of tectonic, geophysical and cartographic data in order to characterize the post-Upper Tortonian deformation. For this, seismic reflection profiles have been interpreted with the help of hidrocarbon boreholes to define the thickness of the Upper Tortonian sedimentary sequence. All these data provide an estimation of the geometrical and kinematic characteristics of the extensional faults, direction of movement and rate of displacement of these rocks during Messinian/Pliocene times. References Rodríguez-Fernández, J., Roldan, F. J., J.M. Azañón y Garcia-Cortes, A. 2013. EL colapso gravitacional del frente orogénico alpino en el Dominio Subbético durante el Mioceno medio-superior: El Complejo Extensional Subbético. Boletín Geológico y Minero, 124 (3): 477-504

A relationship between porosity and permeability of carbonate rock reservoirs

NASA Astrophysics Data System (ADS)

Lee, J.; Park, Y.; Jo, Y.; Jeong, J.; Eom, S.

2009-12-01

Most of oil reservoirs in the world occur in carbonate rocks. Thus, characterization of the carbonate reservoirs, including understanding the correlation between porosity and permeability is essentially required to enhance oil recovery. Compared with the other sedimentary rocks such as sandstone and shale, the carbonate rocks would exhibit a wide variety of vertical and horizontal heterogeneities. In general, pores of the carbonate rocks can be affected by mineral dissolution, replacement by other minerals and re-crystallization, which are the post-depositional processes. Permeability has been estimated at a wide scale by thin section image analysis, rock core experiments, geophysical well logging data and large scale aquifer tests. For the same porosity, the permeability might show a wide variation. In this study, a large number of the porosity and the permeability data pairs for world wide carbonate rocks (reservoirs) were collected from many literatures. The porosity and permeability data were grouped according to test scale, the reservoir location and the rock types. As is already known, the relation showed a rather scattered distribution also in this study, not monotonous, which indicates that higher porosity does not mean higher permeability of the rock formation. This study provides the analysis results and implications for oil production of the carbonate reservoirs. This research was funded by Energy Efficiency and Resources Program of KETEP (Korea Institute of Energy Technology Evaluation and Planning), Grant No. 2009T100200058.

Earth Observations taken by Expedition 30 crewmember

NASA Image and Video Library

2012-04-21

ISS030-E-254011 (21 April 2012) --- The Ouarkziz Impact Crater is featured in this image photographed by an Expedition 30 crew member on the International Space Station. The Ouarkziz Impact Crater is located in northwestern Algeria close to the border with Morocco. According to scientists, the crater was formed by a meteor impact less than 70 million years ago during the late Cretaceous Period of the Mesozoic Era or “Age of Dinosaurs”. Originally called Tindouf, the 3.5-kilometer in diameter impact crater (center) has been heavily eroded since its formation; however its circular morphology is highlighted by exposures of older sedimentary rock layers that form roughly northwest-to-southeast-trending ridgelines to the north and south. From the vantage point of a crew member onboard the space station, the impact crater is clearly visible with a magnifying camera lens. A geologist interpreting this image to build a working geological history of the region would conclude that the Ouarkziz impact crater is younger than the sedimentary rocks, as the rock layers had to be already present for the meteor to hit them. Likewise, a stream channel is visible cutting across the center of the impact structure (center), indicating that the channel formed after the impact had occurred. This Principal of Cross-Cutting Relationships, usually attributed to the famous 19th century geologist Charles Lyell, is a basic logic tool used by geologists to build relative sequence and history of events when investigating a region.

Geophysical survey of the proposed Tsenkher impact structure, Gobi Altai, Mongolia

NASA Astrophysics Data System (ADS)

Ormö, Jens; Gomez-Ortiz, David; Komatsu, Goro; Bayaraa, Togookhuu; Tserendug, Shoovdor

2010-03-01

We have performed forward magnetic and gravity modeling of data obtained during the 2007 expedition to the 3.7km in diameter, circular, Tsenkher structure, Mongolia, in order to evaluate the cause of its formation. Extensive occurrences of brecciated rocks, mainly in the form of an ejecta blanket outside the elevated rim of the structure, support an explosive origin (e.g., cosmic impact, explosive volcanism). The host rocks in the area are mainly weakly magnetic, silica-rich sandstones, and siltstones. A near absence of surface exposures of volcanic rocks makes any major volcanic structures (e.g., caldera) unlikely. Likewise, the magnetic models exclude any large, subsurface, intrusive body. This is supported by an 8mGal gravity low over the structure indicating a subsurface low density body. Instead, the best fit is achieved for a bowl-shaped structure with a slight central rise as expected for an impact crater of this size in mainly sedimentary target. The structure can be either root-less (i.e., impact crater) or rooted with a narrow feeder dyke with relatively higher magnetic susceptibility and density (i.e., volcanic maar crater). The geophysical signature, the solitary appearance, the predominantly sedimentary setting, and the comparably large size of the Tsenkher structure favor the impact crater alternative. However, until mineralogical/geochemical evidence for an impact is presented, the maar alternative remains plausible although exceptional as it would make the Tsenkher structure one of the largest in the world in an unusual setting for maar craters.

Thick sequences of silicate and carbonate rocks of sedimentary origin in North America an interim report

USGS Publications Warehouse

Love, John David

1956-01-01

Thick sequences of silicate and carbonate rocks of sedimentary origin have been investigated in 64 areas in North America. The areas containing the thickest and most homogeneous stratigraphic sections more than 1,000 feet thick, buried at depths greater than 10,000 feet are: 1. Uinta Basin, Utah, where the Mancos shale is 1,300 to 5,000 feet thick, the Weber sandstone is 1,000 to 1,600 feet thick, and Mississippian limestones are 1,000 to 1,500 feet thick. 2. Washakie Basin, Wyoming, and Sand Wash Ba.sin, Colorado, where the Lewis shale is 1,000 to 2,000 feet thick and the Cody-Mancos shale is 4,500 to 5,500 feet thick. 3. Green River Basin, Wyoming, where the Cody-Hilliard-Baxter-Mancos shale sequence averages more than 3,000 feet, the siltstone and shale of the Chugwater formation totals 1,000 feet, and the Madison limestone ranges from 1,000 to 1,400 feet thick. 4. Red Desert (Great Divide) Basin, Wyoming, where the Cody shale is 4,000 feet thick. 5. Hanna Basin, Wyoming, where the Steele shale is 4,500 feet thick. 6. Wind River Basin, Wyoming, where the Cody shale is 3,600 to 5,000 feet thick. Geochemical characteristics of these rocks in these areas are poorly known but are being investigated. A summary of the most pertinent recent ana1yses is presented.

The mineralogy and petrology of I-type cosmic spherules: Implications for their sources, origins and identification in sedimentary rocks

NASA Astrophysics Data System (ADS)

Genge, Matthew J.; Davies, Bridie; Suttle, Martin D.; van Ginneken, Matthias; Tomkins, Andrew G.

2017-12-01

I-type cosmic spherules are micrometeorites that formed by melting during atmospheric entry and consist mainly of iron oxides and FeNi metal. I-types are important because they can readily be recovered from sedimentary rocks allowing study of solar system events over geological time. We report the results of a study of the mineralogy and petrology of 88 I-type cosmic spherules recovered from Antarctica in order to evaluate how they formed and evolved during atmospheric entry, to constrain the nature of their precursors and to establish rigorous criteria by which they may be conclusively identified within sediments and sedimentary rocks. Two textural types of I-type cosmic spherule are recognised: (1) metal bead-bearing (MET) spherules dominated by Ni-poor (<1.5 wt%) wüstite and FeNi metal (10-95 wt% Ni) with minor magnetite, and (2) metal bead-free (OX) spherules dominated by Ni-rich wüstite (0.5-22.5 wt%) and magnetite. Two varieties of OX spherule are distinguished, magnetite-poor dendritic spherules and magnetite-rich coarse spherules. Six OXMET particles having features of both MET and OX spherules were also observed. The wüstite to magnetite ratios and metal contents of the studied particles testify to their formation by melting of extraterrestrial FeNi grains during progressive oxidation in the atmosphere. Precursors are suggested to be mainly kamacite and rare taenite grains. Vesicle formation within metal beads and extrusion of metallic liquid into surrounding wüstite grain boundaries suggests an evaporated iron sulphide or carbide component within at least 23% of particles. The Ni/Co ratios of metal vary from 14 to >100 and suggest that metal from H-group ordinary, CM, CR and iron meteorites may form the majority of particles. Oxidation during entry heating increases in the series MET < magnetite-poor OX < magnetite-rich OX spherules owing to differences in particle size, entry angle and velocity. Magnetite-poor OX spherules are shown to form by crystallisation of non-stoichiometric wüstite at the liquidus followed by sub-solidus decomposition to magnetite, whilst in magnetite-rich OX spherules magnetite crystallises directly at the liquidus. Magnetite rims found on most particles are suggested to form by oxidation during sub-solidus flight. The separation of metal beads due to deceleration is proposed to have been minor with most OX spherules shown to have been in equilibrium with metal beads containing >80 wt% Ni comprising a particle mass fraction of <0.2. Non-equilibrium effects in the exchange of Ni between wüstite and metal, and magnetite and wüstite are suggested as proxies for the rate of oxidation and cooling rate respectively. Variations in magnetite and wüstite crystal sizes are also suggested to relate to cooling rate allowing relative entry angle of particles to be evaluated. The formation of secondary metal in the form of sub-micron Ni-rich or Pt-group nuggets and as symplectite with magnetite was also identified and suggested to occur largely due to the exsolution of metallic alloys during decomposition of non-stoichiometric wüstite. Weathering is restricted to replacement of metal by iron hydroxides. The following criteria are recommended for the conclusive identification of I-type spherules within sediments and sedimentary rocks: (i) spherical particle morphologies, (ii) dendritic crystal morphologies, (iii) the presence of wüstite and magnetite, (iv) Ni-bearing wüstite and magnetite, and (v) the presence of relict FeNi metal.

FT-IR study of CO 2 interaction with Na-rich montmorillonite

DOE PAGES

Krukowski, Elizabeth G.; Goodman, Angela; Rother, Gernot; ...

2015-05-27

Here, carbon capture, utilization and storage (CCUS) in saline reservoirs in sedimentary formations has the potential to reduce the impact of fossil fuel combustion on climate change by reducing CO 2 emissions to the atmosphere and storing the CO 2 in geologic formations in perpetuity. At pressure and temperature (PT) conditions relevant to CCUS, CO 2 is less dense than the pre-existing brine in the formation, and the more buoyant CO 2 will migrate to the top of the formation where it will be in contact with cap rock. Interactions between clay-rich shale cap rocks and CO 2 are poorlymore » understood at PT conditions appropriate for CCUS in saline formations. In this study, the interaction of CO 2 with clay minerals in the cap rock overlying a saline formation has been examined using Na + exchanged montmorillonite (Mt) (Na +-STx-1) (Na + Mt) as an analog for clay-rich shale. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) was used to discern mechanistic information for CO 2 interaction with hydrated (both one- and two-water layers) and relatively dehydrated (both dehydrated layers and one-water layers) Na+-STx-1 at 35 °C and 50 C and CO 2 pressure from 0 5.9 MPa. CO 2-induced perturbations associated with the water layer and Na+-STx-1 vibrational modes such as AlAlOH and AlMgOH were examined. Data indicate that CO 2 is preferentially incorporated into the interlayer space, with relatively dehydrated Na +-STx-1 capable of incorporating more CO 2 compared to hydrated Na +-STx-1. Spectroscopic data provide no evidence of formation of carbonate minerals or the interaction of CO 2 with sodium cations in the Na +-STx-1 structure.« less

Alternatives for the source of the exotic green clasts from Moldavian Nappes (East Carpathians, Romania)

NASA Astrophysics Data System (ADS)

Tatu, M.

2009-04-01

Important segment of the Carpathian chain, the East Carpathians consists of several tectonic units build up during the Mesozoic and Cenozoic closure of the Tethyan Ocean. These tectonic units are composed by crystalline basements and sedimentary covers, or only by sedimentary piles and they represent a result of two compressional phases of Alpine orogenesis: one during Late Cretaceous that was responsible for thrusting of Central East Carpathian Nappes and Outher Dacian Nappes, and a second phase during Early and Middle Miocene interval that involved the Moldavian Nappes as the external nappes (Sandulescu, 1988). The Moldavian Nappes consist of cover nappes tectonically detached from the basement upon which it was deposited. From inside towards outside several units occur: Convolute Flysch Nappe, Macla Nappe, Audia Nappe, Tarcau Nappe, Marginal Folds Nappe and Subcarpathian Nappe (Sãndulescu et al., 1981). If the internal units (up to Audia Nappe) are represented by the Cretaceous sediment piles, in the external units, especially in the Tarcau Nappe and also in the Marginal Folds Nappe the lithology is dominated by the Paleogene deposits, especially by the Oligocene formations. The most particular for these units are the presence of heterogeneous composition induced by the wildflysch type sedimentation. Previous researchers have considered the piles of the both units as flyschoid deposits, and for a minor central part (Slon Facies) they accepted a wildflysch scenario. Based on our field studies between Prahova valley (Romania) and Tisa upper stream basin (Ukraine), the different sedimentary strata (the Oligocene Tarcau, Fusaru, Kliwa sandstones, dysodilic and menilitic rocks, polymictic conglomerates, marls and argillaceous deposits together with Upper Cretaceous polymictic conglomerates and green-reddish argillaceous deposits) are tectonically mixed during the late-Oligocene - Middle Miocene events. The mechanism of sedimentary mélange is supposed to be related to submarine landslide initiated by huge earthquake activity. In this way the velocity of landslide sedimentation was high and as result the spatial distribution of different rock types is inhomogeneous. On the other hand, high velocity of syn-sedimentary deformation generates synchronous shear zones. The stress field in this environment is influenced by the lithological amalgamation and local discontinuities. After sedimentary deposition and syn - deformation processes in all the area, suborizontal shear zones (SSZ) are formed along the borders of sandstone olistoliths embedded in fine-grained sand-argillaceous sediments; they are related to the Miocene tectogenesis. Taking into account that are not lithological differences in the Tarcau and the Marginal Folds units, the contact between them as all major SSZ represent the intra-formational thrusts (Sandulescu, 1984). An important characteristic of the Moldavian Nappes is the presence of the exotic rocks as clasts in conglomerates that are very different in nature (igneous, metamorphic and sedimentary), volume and size and generally green in colour. Many authors who studied this lithological aspect have suggested that a Cumanian ridge was their source. The ridge was active since Upper Creataceous till Miocene widespread from Central Dobrogea to Poland and mainly composed by "dobrogean green schist" rocks. This ridge was placed between Audia and Macla sedimentation areas, or between Audia and Tarcau sedimentation areas. According to our studies, the green clasts from various conglomerates with igneous (intrusive and extrusive aspects), metamorphic (medium to low grade) and sedimentary nature present a variable participation. The green clasts are apparently similar with the central dobrogean green schist rocks and are less than 10% in participation in all Moldavian units. For this reason we suggest that the Central Dobrogean domain wasn't the source area for the discussed clasts. After Oszczypko (2006), in the Polish Carpathians, between the Magura and Silesian basins during the Upper Cretaceous - Miocene interval the Silesian Ridge was active. Probably, the same structure was active from Polish Carpathians to the south-western end of Romanian East Carpathians also responsible for the presence of the exotic pebbles from external units of East Carpathians. Isotopic ages of exotic clasts from Polish Carpathian Flysch display the values characteristics for the late Neoproterozoic-Cambrian and the late Carboniferous - Permian intervals (Poprawa et al., 2004) which may suggests that the active ridge was a part of the Tornquist - Teisseyre Zone exhumation. Refernces Oszczypko N. 2006. Geol. Quart., 50 (1): 169-194. Poprawa P., Malata T., Pécskay Z., Bana? M., Skulich J., Paszkowski M., Kusiak M. 2004. Min. Soc. Pol. - Spec. Papers, 24: 329-332. Sandulescu M. 1984. Ed. Tehnica, Bucuresti, 336 Sandulescu, M. 1988. AAPG Memoir, vol. 45, pp. 17- 25.

Types and Mechanisms of Alterations on the Mesozoic Ophiolites (Lake Van Region-Turkey): Petrographical and Geochemical Approach

NASA Astrophysics Data System (ADS)

Yazıcı, Ömer; Üner, Tijen; Mutlu, Sacit; Depçi, Tolga

2017-04-01

Mesozoic ophiolites are widely located in the eastern part of Lake Van Basin. The ophiolitic rocks deformed during the rifting and/or closure period of the Neo-Tethyan Ocean are observed as tectonic slices in the region. These ophiolites are represented by volcano-sedimentary units, isolated dikes, and mafic-ultramafic rocks. The formation, emplacement and post-emplacement processes of these ophiolitic rocks can be understood owing to alterations as rodingitization, serpentinization, and listwaenitization. Three stages of sequent mineralization are detected in the ophiolitic rocks. First stage is pyrometasomatization, represented by metamorphic minerals (garnet, chlorite etc.), observed in intruded dikes. Second stage is hydrothermal alteration of mafic-ultramafic rocks namely serpentinization. Listwaenite alteration is the last stage of mineralization. According to petrographical investigations, garnet+chlorite+diopsite minerals are detected in rodengites. The conversion of the plagioclase minerals to the calcsilicatic minerals in rodengites suggests that these rocks are metasomatic rocks produced by Ca-rich fluids derived from serpentinization of the ultramafic rocks. The serpentine minerals (chrysotile-lizardite) can be distinguished from each other by their morphology as being platy or fibrous. Listwaenite alteration is followed by the formation of carbonate, silica, oxides and hydroxides. Chemical analysis of these rocks show that the listwaenites have an enrichment in Ni and Co contents while the rodingites have low SiO2 and high CaO and MgO values (SiO2 28,50 - 36,67%, CaO 11,99 - 20,88%, and MgO 7,99 - 17,73%). Alteration types observed on the ophiolitic rocks demonstrate that these rocks are metamorphised by low pressure and low to middle temperature conditions (greenshist facies). Serpentinization is pointing out an alteration which occurred during the emplacement of the ophiolites or the latter period. This study has been supported by Project number 2013-FBE-YL072 of the Department of Scientific Research Projects of Yüzüncü Yıl University.

Post-collisional Ediacaran volcanism in oriental Ramada Plateau, southern Brazil

NASA Astrophysics Data System (ADS)

Matté, Vinícius; Sommer, Carlos Augusto; Lima, Evandro Fernandes de; Philipp, Ruy Paulo; Basei, Miguel Angelo Stipp

2016-11-01

Ediacaran volcanic sequences in southernmost Brazil are related to intense post-collisional magmatism of the Brasiliano Orogeny. A portion of this volcanism occurs in the oriental Ramada Plateau located in the center part of the Rio Grande Sul State and is correlated with Hilário and Acampamento Velho formations. The first one is represented dominantly by lava flows and dikes of shoshonitic andesitic composition, besides of volcanogenic sedimentary deposits. The acid rocks of the Acampamento Velho Formation are expressive in the area, comprising high-silica ignimbrites, usually densely welded. Dikes and domes are common too and rhyolitic lava flows occur at the top and intercalated to ignimbrites in the middle of the sequence. The acid rock association has a sodic alkaline affinity. In this unit we mapped a subvolcanic sill of trachyte showing evidence for magma mixing with the rhyolitic magma. It has sodic alkaline affinity, and FeOt/FeO + MgO ratios and agpaitic index lower than those recorded in the rhyolites/ignimbrites. The Acampamento Velho Formation includes in this area, subordinately, basalts as àà flows and dikes intercalated with acid rocks. They have sodic alkaline nature and characteristics of intraplate basic rocks. New zircon U-Pb dating indicates crystallization age of 560 ± 2 Ma in a densely welded ignimbrite, 560 ± 14 Ma for a mafic trachyte and 562 ± 2 Ma for a subvolcanic rhyolite. The sodic alkaline rocks in this region evolved by fractional crystallization processes and magma mixing with major crustal contribution at approximately 560 Ma. The chemical characteristics are similar to those of A-type granites associated with Neoproterozoic post-collision magmatism in the Sul-rio-grandense Shield.

Candor Exposed

NASA Image and Video Library

2006-05-19

This MOC image shows outcrops of light-toned rock, interpreted to be sedimentary in origin, in east Candor Chasma. The exposures of light-toned rock are separated by areas of windblown ripples and dark sand