Adu-Brimpong, Joel; Coffey, Nathan; Ayers, Colby; Berrigan, David; Yingling, Leah R; Thomas, Samantha; Mitchell, Valerie; Ahuja, Chaarushi; Rivers, Joshua; Hartz, Jacob; Powell-Wiley, Tiffany M
2017-03-08
Optimization of existing measurement tools is necessary to explore links between aspects of the neighborhood built environment and health behaviors or outcomes. We evaluate a scoring method for virtual neighborhood audits utilizing the Active Neighborhood Checklist (the Checklist), a neighborhood audit measure, and assess street segment representativeness in low-income neighborhoods. Eighty-two home neighborhoods of Washington, D.C. Cardiovascular Health/Needs Assessment (NCT01927783) participants were audited using Google Street View imagery and the Checklist (five sections with 89 total questions). Twelve street segments per home address were assessed for (1) Land-Use Type; (2) Public Transportation Availability; (3) Street Characteristics; (4) Environment Quality and (5) Sidewalks/Walking/Biking features. Checklist items were scored 0-2 points/question. A combinations algorithm was developed to assess street segments' representativeness. Spearman correlations were calculated between built environment quality scores and Walk Score ® , a validated neighborhood walkability measure. Street segment quality scores ranged 10-47 (Mean = 29.4 ± 6.9) and overall neighborhood quality scores, 172-475 (Mean = 352.3 ± 63.6). Walk scores ® ranged 0-91 (Mean = 46.7 ± 26.3). Street segment combinations' correlation coefficients ranged 0.75-1.0. Significant positive correlations were found between overall neighborhood quality scores, four of the five Checklist subsection scores, and Walk Scores ® ( r = 0.62, p < 0.001). This scoring method adequately captures neighborhood features in low-income, residential areas and may aid in delineating impact of specific built environment features on health behaviors and outcomes.
The association of sidewalk walkability and physical disorder with area-level race and poverty.
Kelly, Cheryl M; Schootman, Mario; Baker, Elizabeth A; Barnidge, Ellen K; Lemes, Amanda
2007-11-01
There are significant differences in physical inactivity in various geographical areas and among demographic groups. Previous research suggests that walking is the most common form of physical activity; however, not all built environments support walking for recreational or transportation purposes. The purpose of this study was to assess the extent to which area-level factors, poverty rate and racial distribution, are associated with aspects of the street-scale environment (i.e. sidewalk walkability and physical disorder) using community audits. Street segments were randomly selected from 210 block groups. Pairs of trained auditors walked each street segment using an audit tool designed to capture aspects of the street environment. Multilevel logistic regression was used to assess the degree of neighborhood (i.e. block group) variation in sidewalk unevenness, sidewalk obstruction and the presence of physical disorder and the association with area-level characteristics. 1780 street segments were audited. Block groups that were predominantly African-American were 38 times more likely to have a lot of unevenness, 15 times more likely to have many obstructions, and 12 times more likely to have physical disorder. Poverty rate was not independently associated with sidewalk walkability; however, block groups with the highest poverty rates were 21 times more likely to have physical disorder. The results indicate that aspects of the built environment vary by characteristics of the neighborhood. This suggests that there is a differential investment in community infrastructures and resources in neighborhoods that are mostly African-American. This differential investment is likely to influence disparities in rates of physical activity.
Schopflocher, Donald; VanSpronsen, Eric; Spence, John C; Vallianatos, Helen; Raine, Kim D; Plotnikoff, Ronald C; Nykiforuk, Candace I J
2012-07-26
Detailed assessments of the built environment often resist data reduction and summarization. This project sought to develop a method of reducing built environment data to an extent that they can be effectively communicated to researchers and community stakeholders. We aim to help in an understanding of how these data can be used to create neighbourhood groupings based on built environment characteristics and how the process of discussing these neighbourhoods with community stakeholders can result in the development of community-informed health promotion interventions. We used the Irvine Minnesota Inventory (IMI) to assess 296 segments of a semi-rural community in Alberta. Expert raters "created" neighbourhoods by examining the data. Then, a consensus grouping was developed using cluster analysis, and the number of IMI variables to characterize the neighbourhoods was reduced by multiple discriminant function analysis. The 296 segments were reduced to a consensus set of 10 neighbourhoods, which could be separated from each other by 9 functions constructed from 24 IMI variables. Biplots of these functions were an effective means of summarizing and presenting the results of the community assessment, and stimulated community action. It is possible to use principled quantitative methods to reduce large amounts of information about the built environment into meaningful summaries. These summaries, or built environment neighbourhoods, were useful in catalyzing action with community stakeholders and led to the development of health-promoting built environment interventions.
Adu-Brimpong, Joel; Coffey, Nathan; Ayers, Colby; Berrigan, David; Yingling, Leah R.; Thomas, Samantha; Mitchell, Valerie; Ahuja, Chaarushi; Rivers, Joshua; Hartz, Jacob; Powell-Wiley, Tiffany M.
2017-01-01
Optimization of existing measurement tools is necessary to explore links between aspects of the neighborhood built environment and health behaviors or outcomes. We evaluate a scoring method for virtual neighborhood audits utilizing the Active Neighborhood Checklist (the Checklist), a neighborhood audit measure, and assess street segment representativeness in low-income neighborhoods. Eighty-two home neighborhoods of Washington, D.C. Cardiovascular Health/Needs Assessment (NCT01927783) participants were audited using Google Street View imagery and the Checklist (five sections with 89 total questions). Twelve street segments per home address were assessed for (1) Land-Use Type; (2) Public Transportation Availability; (3) Street Characteristics; (4) Environment Quality and (5) Sidewalks/Walking/Biking features. Checklist items were scored 0–2 points/question. A combinations algorithm was developed to assess street segments’ representativeness. Spearman correlations were calculated between built environment quality scores and Walk Score®, a validated neighborhood walkability measure. Street segment quality scores ranged 10–47 (Mean = 29.4 ± 6.9) and overall neighborhood quality scores, 172–475 (Mean = 352.3 ± 63.6). Walk scores® ranged 0–91 (Mean = 46.7 ± 26.3). Street segment combinations’ correlation coefficients ranged 0.75–1.0. Significant positive correlations were found between overall neighborhood quality scores, four of the five Checklist subsection scores, and Walk Scores® (r = 0.62, p < 0.001). This scoring method adequately captures neighborhood features in low-income, residential areas and may aid in delineating impact of specific built environment features on health behaviors and outcomes. PMID:28282878
King, Katherine E; Clarke, Philippa J
2015-01-01
Urban form-the structure of the built environment-can influence physical activity, yet little is known about how walkable design differs according to neighborhood sociodemographic composition. We studied how walkable urban form varies by neighborhood sociodemographic composition, region, and urbanicity across the United States. Using linear regression models and 2000-2001 US Census data, we investigated the relationship between 5 neighborhood census characteristics (income, education, racial/ethnic composition, age distribution, and sex) and 5 walkability indicators in almost 65,000 census tracts in 48 states and the District of Columbia. Data on the built environment were obtained from the RAND Corporation's (Santa Monica, California) Center for Population Health and Health Disparities (median block length, street segment, and node density) and the US Geological Survey's National Land Cover Database (proportion open space and proportion highly developed). Disadvantaged neighborhoods and those with more educated residents were more walkable (i.e., shorter block length, greater street node density, more developed land use, and higher density of street segments). However, tracts with a higher proportion of children and older adults were less walkable (fewer street nodes and lower density of street segments), after adjustment for region and level of urbanicity. Research and policy on the walkability-health link should give nuanced attention to the gap between persons living in walkable areas and those for whom walkability has the most to offer. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.
A Disadvantaged Advantage in Walkability: Findings from ...
Urban form-the structure of the built environment-can influence physical activity, yet little is known about how walkable design differs according to neighborhood sociodemographic composition. We studied how walkable urban form varies by neighborhood sociodemographic composition, region, and urbanicity across the United States. Using linear regression models and 2000-2001 US Census data, we investigated the relationship between 5 neighborhood census characteristics (income, education, racial/ethnic composition, age distribution, and sex) and 5 walkability indicators in almost 65,000 census tracts in 48 states and the District of Columbia. Data on the built environment were obtained from the RAND Corporation's (Santa Monica, California) Center for Population Health and Health Disparities (median block length, street segment, and node density) and the US Geological Survey's National Land Cover Database (proportion open space and proportion highly developed). Disadvantaged neighborhoods and those with more educated residents were more walkable (i.e., shorter block length, greater street node density, more developed land use, and higher density of street segments). However, tracts with a higher proportion of children and older adults were less walkable (fewer street nodes and lower density of street segments), after adjustment for region and level of urbanicity. Research and policy on the walkability-health link should give nuanced attention to the gap between perso
Assessing Built Environment Walkability using Activity-Space Summary Measures.
Tribby, Calvin P; Miller, Harvey J; Brown, Barbara B; Werner, Carol M; Smith, Ken R
There is increasing emphasis on active transportation, such as walking, in transportation planning as a sustainable form of mobility and in public health as a means of achieving recommended physical activity and better health outcomes. A research focus is the influence of the built environment on walking, with the ultimate goal of identifying environmental modifications that invite more walking. However, assessments of the built environment for walkability are typically at a spatially disaggregate level (such as street blocks) or at a spatially aggregate level (such as census block groups). A key issue is determining the spatial units for walkability measures so that they reflect potential walking behavior. This paper develops methods for assessing walkability within individual activity spaces : the geographic region accessible to an individual during a given walking trip. We first estimate street network-based activity spaces using the shortest path between known trip starting/ending points and a travel time budget that reflects potential alternative paths. Based on objective walkability measures of the street blocks, we use three summary measures for walkability within activity spaces: i) the average walkability score across block segments (representing the general level of walkability in the activity space); ii) the standard deviation (representing the walkability variation), and; iii) the network autocorrelation (representing the spatial coherence of the walkability pattern). We assess the method using data from an empirical study of built environment walkability and walking behavior in Salt Lake City, Utah, USA. We visualize and map these activity space summary measures to compare walkability among individuals' trips within their neighborhoods. We also compare summary measures for activity spaces versus census block groups, with the result that they agree less than half of the time.
Assessing Built Environment Walkability using Activity-Space Summary Measures
Tribby, Calvin P.; Miller, Harvey J.; Brown, Barbara B.; Werner, Carol M.; Smith, Ken R.
2015-01-01
There is increasing emphasis on active transportation, such as walking, in transportation planning as a sustainable form of mobility and in public health as a means of achieving recommended physical activity and better health outcomes. A research focus is the influence of the built environment on walking, with the ultimate goal of identifying environmental modifications that invite more walking. However, assessments of the built environment for walkability are typically at a spatially disaggregate level (such as street blocks) or at a spatially aggregate level (such as census block groups). A key issue is determining the spatial units for walkability measures so that they reflect potential walking behavior. This paper develops methods for assessing walkability within individual activity spaces: the geographic region accessible to an individual during a given walking trip. We first estimate street network-based activity spaces using the shortest path between known trip starting/ending points and a travel time budget that reflects potential alternative paths. Based on objective walkability measures of the street blocks, we use three summary measures for walkability within activity spaces: i) the average walkability score across block segments (representing the general level of walkability in the activity space); ii) the standard deviation (representing the walkability variation), and; iii) the network autocorrelation (representing the spatial coherence of the walkability pattern). We assess the method using data from an empirical study of built environment walkability and walking behavior in Salt Lake City, Utah, USA. We visualize and map these activity space summary measures to compare walkability among individuals’ trips within their neighborhoods. We also compare summary measures for activity spaces versus census block groups, with the result that they agree less than half of the time. PMID:27213027
Messer, Lynne C.; Kroeger, Gretchen L.
2011-01-01
Background: The built environment, a key component of environmental health, may be an important contributor to health disparities, particularly for reproductive health outcomes. Objective: In this study we investigated the relationship between seven indices of residential built environment quality and adverse reproductive outcomes for the City of Durham, North Carolina (USA). Methods: We surveyed approximately 17,000 residential tax parcels in central Durham, assessing > 50 individual variables on each. These data, collected using direct observation, were combined with tax assessor, public safety, and U.S. Census data to construct seven indices representing important domains of the residential built environment: housing damage, property disorder, security measures, tenure (owner or renter occupied), vacancy, crime count, and nuisance count. Fixed-slope random-intercept multilevel models estimated the association between the residential built environment and five adverse birth outcomes. Models were adjusted for maternal characteristics and clustered at the primary adjacency community unit, defined as the index block, plus all adjacent blocks that share any portion of a line segment (block boundary) or vertex. Results: Five built environment indices (housing damage, property disorder, tenure, vacancy, and nuisance count) were associated with each of the five outcomes in the unadjusted context: preterm birth, small for gestational age (SGA), low birth weight (LBW), continuous birth weight, and birth weight percentile for gestational age (BWPGA; sex-specific birth weight distributions for infants delivered at each gestational age using National Center for Health Statistics referent births for 2000–2004). However, some estimates were attenuated after adjustment. In models adjusted for individual-level covariates, housing damage remained statistically significantly associated with SGA, birth weight, and BWPGA. Conclusion: This work suggests a real and meaningful relationship between the quality of the residential built environment and birth outcomes, which we argue are a good measure of general community health. PMID:22138639
Hierarchical layered and semantic-based image segmentation using ergodicity map
NASA Astrophysics Data System (ADS)
Yadegar, Jacob; Liu, Xiaoqing
2010-04-01
Image segmentation plays a foundational role in image understanding and computer vision. Although great strides have been made and progress achieved on automatic/semi-automatic image segmentation algorithms, designing a generic, robust, and efficient image segmentation algorithm is still challenging. Human vision is still far superior compared to computer vision, especially in interpreting semantic meanings/objects in images. We present a hierarchical/layered semantic image segmentation algorithm that can automatically and efficiently segment images into hierarchical layered/multi-scaled semantic regions/objects with contextual topological relationships. The proposed algorithm bridges the gap between high-level semantics and low-level visual features/cues (such as color, intensity, edge, etc.) through utilizing a layered/hierarchical ergodicity map, where ergodicity is computed based on a space filling fractal concept and used as a region dissimilarity measurement. The algorithm applies a highly scalable, efficient, and adaptive Peano- Cesaro triangulation/tiling technique to decompose the given image into a set of similar/homogenous regions based on low-level visual cues in a top-down manner. The layered/hierarchical ergodicity map is built through a bottom-up region dissimilarity analysis. The recursive fractal sweep associated with the Peano-Cesaro triangulation provides efficient local multi-resolution refinement to any level of detail. The generated binary decomposition tree also provides efficient neighbor retrieval mechanisms for contextual topological object/region relationship generation. Experiments have been conducted within the maritime image environment where the segmented layered semantic objects include the basic level objects (i.e. sky/land/water) and deeper level objects in the sky/land/water surfaces. Experimental results demonstrate the proposed algorithm has the capability to robustly and efficiently segment images into layered semantic objects/regions with contextual topological relationships.
Point clouds segmentation as base for as-built BIM creation
NASA Astrophysics Data System (ADS)
Macher, H.; Landes, T.; Grussenmeyer, P.
2015-08-01
In this paper, a three steps segmentation approach is proposed in order to create 3D models from point clouds acquired by TLS inside buildings. The three scales of segmentation are floors, rooms and planes composing the rooms. First, floor segmentation is performed based on analysis of point distribution along Z axis. Then, for each floor, room segmentation is achieved considering a slice of point cloud at ceiling level. Finally, planes are segmented for each room, and planes corresponding to ceilings and floors are identified. Results of each step are analysed and potential improvements are proposed. Based on segmented point clouds, the creation of as-built BIM is considered in a future work section. Not only the classification of planes into several categories is proposed, but the potential use of point clouds acquired outside buildings is also considered.
Neighborhood sampling: how many streets must an auditor walk?
McMillan, Tracy E; Cubbin, Catherine; Parmenter, Barbara; Medina, Ashley V; Lee, Rebecca E
2010-03-12
This study tested the representativeness of four street segment sampling protocols using the Pedestrian Environment Data Scan (PEDS) in eleven neighborhoods surrounding public housing developments in Houston, TX. The following four street segment sampling protocols were used (1) all segments, both residential and arterial, contained within the 400 meter radius buffer from the center point of the housing development (the core) were compared with all segments contained between the 400 meter radius buffer and the 800 meter radius buffer (the ring); all residential segments in the core were compared with (2) 75% (3) 50% and (4) 25% samples of randomly selected residential street segments in the core. Analyses were conducted on five key variables: sidewalk presence; ratings of attractiveness and safety for walking; connectivity; and number of traffic lanes. Some differences were found when comparing all street segments, both residential and arterial, in the core to the ring. Findings suggested that sampling 25% of residential street segments within the 400 m radius of a residence sufficiently represents the pedestrian built environment. Conclusions support more cost effective environmental data collection for physical activity research.
Neighborhood sampling: how many streets must an auditor walk?
2010-01-01
This study tested the representativeness of four street segment sampling protocols using the Pedestrian Environment Data Scan (PEDS) in eleven neighborhoods surrounding public housing developments in Houston, TX. The following four street segment sampling protocols were used (1) all segments, both residential and arterial, contained within the 400 meter radius buffer from the center point of the housing development (the core) were compared with all segments contained between the 400 meter radius buffer and the 800 meter radius buffer (the ring); all residential segments in the core were compared with (2) 75% (3) 50% and (4) 25% samples of randomly selected residential street segments in the core. Analyses were conducted on five key variables: sidewalk presence; ratings of attractiveness and safety for walking; connectivity; and number of traffic lanes. Some differences were found when comparing all street segments, both residential and arterial, in the core to the ring. Findings suggested that sampling 25% of residential street segments within the 400 m radius of a residence sufficiently represents the pedestrian built environment. Conclusions support more cost effective environmental data collection for physical activity research. PMID:20226052
Development of a pedestrian audit tool to assess rural neighborhood walkability.
Scanlin, Kathleen; Haardoerfer, Regine; Kegler, Michelle C; Glanz, Karen
2014-08-01
Recently, investigators have begun to refine audit instruments for use in rural areas. However, no studies have developed a walkability summary score or have correlated built environment characteristics with physical activity behavior. The Rural Pedestrian Environmental Audit Instrument was developed specifically for use in rural areas. Segments surrounding participant's homes were selected to represent neighborhood streets (N = 116). Interrater reliability was conducted on a subset of streets (N = 42). Rural-specific domain and walkability scores were developed and correlated with individual-level data on perceptions of the neighborhood and self-reported physical activity behavior. Interrater reliability for the instrument was substantial and all domains had high agreement. Walkability in the audited area was low with even the best segments demonstrating only moderate support for walking. There were no significant correlations between the neighborhood walkability score and self-reported neighborhood walkability, time spent walking, sedentary behavior, or BMI; however, a few correlations within the social/dynamic domain were significant. This study expands recent research refining audit instruments for rural areas. Findings suggest the usefulness of summarizing environmental data at the domain level and linking it to physical activity behavior to identify aspects of the neighborhood environment that are most strongly correlated with actual behavior.
The Dark Side:Stigma in purpose-built senior environments
Hrybyk, G; Rubinstein, RL; Eckert, K; Frankowski, AC; Keimig, L; Nemec, M; Peeples, A; Roth, E; Doyle, PJ
2014-01-01
This paper focuses on stigma in collective living environments for older adults, specifically multi-level campuses. We contrast two design profiles, a purpose-built campus which opened in 1997, and an older setting that grew by accretion over decades. Purpose-built housing is used as originally intended, designed, and constructed; housing built by accretion has been modified over time to meet changing needs and uses. The separation by care levels in both sites is reflected in their cultures as residents and staff relate to physical levels of care through a vocabulary of fear and stigma. Residents of the independent living building on the purpose-built campus refer to the assisted living building, accessed only through a second floor link, as “the other side” or “the dark side.” In this setting we observe stigma assigned to a place in the built environment. By contrast, in the older setting built by accretion over the last century, levels of care feature a less-structured clustering of independent living and assisted living, and common areas were shared by residents from multiple care levels. We have observed less stigma associated with levels of care in this older building. Grounding our analysis in data drawn from ongoing ethnographic research, we focus on the built environment as it relates to stigma in the social environment. The paper concludes with a discussion of the importance and pervasiveness of stigma in senior environments. PMID:25214701
VoxResNet: Deep voxelwise residual networks for brain segmentation from 3D MR images.
Chen, Hao; Dou, Qi; Yu, Lequan; Qin, Jing; Heng, Pheng-Ann
2018-04-15
Segmentation of key brain tissues from 3D medical images is of great significance for brain disease diagnosis, progression assessment and monitoring of neurologic conditions. While manual segmentation is time-consuming, laborious, and subjective, automated segmentation is quite challenging due to the complicated anatomical environment of brain and the large variations of brain tissues. We propose a novel voxelwise residual network (VoxResNet) with a set of effective training schemes to cope with this challenging problem. The main merit of residual learning is that it can alleviate the degradation problem when training a deep network so that the performance gains achieved by increasing the network depth can be fully leveraged. With this technique, our VoxResNet is built with 25 layers, and hence can generate more representative features to deal with the large variations of brain tissues than its rivals using hand-crafted features or shallower networks. In order to effectively train such a deep network with limited training data for brain segmentation, we seamlessly integrate multi-modality and multi-level contextual information into our network, so that the complementary information of different modalities can be harnessed and features of different scales can be exploited. Furthermore, an auto-context version of the VoxResNet is proposed by combining the low-level image appearance features, implicit shape information, and high-level context together for further improving the segmentation performance. Extensive experiments on the well-known benchmark (i.e., MRBrainS) of brain segmentation from 3D magnetic resonance (MR) images corroborated the efficacy of the proposed VoxResNet. Our method achieved the first place in the challenge out of 37 competitors including several state-of-the-art brain segmentation methods. Our method is inherently general and can be readily applied as a powerful tool to many brain-related studies, where accurate segmentation of brain structures is critical. Copyright © 2017 Elsevier Inc. All rights reserved.
Su, Meng; Tan, Ya-Yun; Liu, Qing-Min; Ren, Yan-Jun; Kawachi, Ichiro; Li, Li-Ming; Lv, Jun
2014-09-01
Neighborhood built environment may influence residents' physical activity, which in turn, affects their health. This study aimed to determine the associations between perceived built environment and leisure-time physical activity in Hangzhou, China. 1440 participants aged 25-59 were randomly selected from 30 neighborhoods in three types of administrative planning units in Hangzhou. International Physical Activity Questionnaire long form and NEWS-A were used to obtain individual-level data. The China Urban Built Environment Scan Tool was used to objectively assess the neighborhood-level built environment. Multi-level regression was used to explore the relationship between perceived built environment variables and leisure-time physical activities. Data was collected in Hangzhou from June to December in 2012, and was analyzed in May 2013. Significant difference between neighborhood random variations in physical activity was identified (P=0.0134); neighborhood-level differences accounted for 3.0% of the variability in leisure-time physical activity. Male residents who perceived higher scores on access to physical activity destinations reported more involvement in leisure-time physical activity. Higher scores on perception of esthetic quality, and lower on residential density were associated with more time in leisure-time walking in women. The present study demonstrated that perceived urban built environment attributes significantly correlate with leisure-time physical activity in Hangzhou, China. Copyright © 2014. Published by Elsevier Inc.
Li, F.; Fisher, K; Brownson, R.; Bosworth, M.
2005-01-01
Objective: To examine the relation between built environment factors (representing several dimensions of urban form of neighbourhoods) and walking activity at both the neighbourhood level and the resident level, in an older adult sample. Design, setting, participants: A cross sectional, multilevel design with neighbourhoods as the primary sampling unit and senior residents as the secondary unit. Five hundred and seventy seven residents (mean age = 74 years, SD = 6.3 years) participated in the survey, which was conducted among 56 city defined neighbourhoods in Portland, Oregon, USA. Neighbourhood level variables were constructed using geographical information systems. Resident level variables consisted of a mix of self reports and geocoded data on the built environment. Main outcome measure: Self reported neighbourhood walking. Main results: A positive relation was found between built environment factors (density of places of employment, household density, green and open spaces for recreation, number of street intersections) and walking activity at the neighbourhood level. At the resident level, perceptions of safety for walking and number of nearby recreational facilities were positively related to high levels of walking activity. A significant interaction was observed between number of street intersections and perceptions of safety from traffic. Conclusions: Certain neighbourhood built environment characteristics related to urban form were positively associated with walking activity in the neighbourhoods of senior residents. Public health promotion of walking activity/urban mobility and the design of interventions need to consider the contribution of neighbourhood level built environment influences. PMID:15965138
NASA Astrophysics Data System (ADS)
Wang, An; Fallah-Shorshani, Masoud; Xu, Junshi; Hatzopoulou, Marianne
2016-10-01
Near-road concentrations of nitrogen dioxide (NO2), a known marker of traffic-related air pollution, were simulated along a busy urban corridor in Montreal, Quebec using a combination of microscopic traffic simulation, instantaneous emission modeling, and air pollution dispersion. In order to calibrate and validate the model, a data collection campaign was designed. For this purpose, measurements of NO2 were conducted mid-block along four segments of the corridor throughout a four-week campaign conducted between March and April 2015. The four segments were chosen to be consecutive and yet exhibiting variability in road configuration and built environment characteristics. Roadside NO2 measurements were also paired with on-site and fixed-station meteorological data. In addition, traffic volumes, composition, and routing decisions were collected using video-cameras located at upstream and downstream intersections. Dispersion of simulated emissions was conducted for eight time slots and under a range of meteorological conditions using three different models with vastly different dispersion algorithms (OSPM, CALINE 4, and SIRANE). The three models exhibited poor correlation with near-road NO2 concentrations and were better able to simulate average concentrations occurring along the roadways rather than the range of concentrations measured under diverse meteorological and traffic conditions. As hypothesized, the model SIRANE that can handle a street canyon configuration was the most sensitive to the built environment especially to the presence of tall buildings around the road. In contrast, CALINE exhibited the lowest sensitivity to the built environment.
Maslow, Andréa L; Reed, Julian A; Price, Anna E; Hooker, Steven P
2012-01-01
Rail trails are elements of the built environment that support the Task Force on Community Preventive Services' recommendation to create, or enhance access to, places for physical activity (PA). The purpose of this study was to examine the associations between sociodemographic characteristics and perceptions of the built environment with the frequency, type, and duration of PA among users of an urban, paved rail trail segment. Interviewers conducted intercept surveys with 431 rail trail users and analyzed data by using logistic regression to estimate odds ratios between sociodemographic characteristics and perceptions of the built environment on the frequency, type, and duration of PA performed on the trail. Adults who used the trail in the cool months, traveled to the trail by a motorized vehicle, used the trail with others, and had some graduate school education visited the trail less often. Younger adults, men, whites, and those with some graduate school education were more likely to engage in vigorous activities on the trail. Adults who traveled to the trail by a motorized vehicle spent more time engaged in PA on the trail. Our results suggest that the most frequent users of a rail trail for PA are those who use the trail alone and travel to the trail by bicycle or on foot. Trails are an aspect of the built environment that supports active lifestyles, and future studies should evaluate different types of trails among more diverse populations and locations.
Built Environment and Obesity by Urbanicity in the U.S
Xu, Yanqing; Wang, Fahui
2015-01-01
Based on the data from the Behavioral Risk Factor Surveillance System 2012, this study examines the association of neighborhood built environments with individual physical inactivity and obesity in the U.S. Multilevel modeling is used to control for the effects of individual socio-demographic characteristics. Neighborhood variables include built environment, poverty level and urbanicity at the county level. Among the built environment variables, a poorer street connectivity and a more prominent presence of fast-food restaurants are associated with a higher obesity risk (especially for areas of certain urbanicity levels). Analysis of data subsets divided by areas of different urbanicity levels and by gender reveals the variability of effects of independent variables, more so for the neighborhood variables than individual variables. This implies that some obesity risk factors are geographically specific and vary between men and women. The results lend support to the role of built environment in influencing people’s health behavior and outcome, and promote public policies that need to be geographically adaptable and sensitive to the diversity of demographic groups. PMID:25864019
Built environment and obesity by urbanicity in the U.S.
Xu, Yanqing; Wang, Fahui
2015-07-01
Based on the data from the Behavioral Risk Factor Surveillance System 2012, this study examines the association of neighborhood built environments with individual physical inactivity and obesity in the U.S. Multilevel modeling is used to control for the effects of individual socio-demographic characteristics. Neighborhood variables include built environment, poverty level and urbanicity at the county level. Among the built environment variables, a poorer street connectivity and a more prominent presence of fast-food restaurants are associated with a higher obesity risk (especially for areas of certain urbanicity levels). Analysis of data subsets divided by areas of different urbanicity levels and by gender reveals the variability of effects of independent variables, more so for the neighborhood variables than individual variables. This implies that some obesity risk factors are geographically specific and vary between men and women. The results lend support to the role of built environment in influencing people's health behavior and outcome, and promote public policies that need to be geographically adaptable and sensitive to the diversity of demographic groups. Copyright © 2015 Elsevier Ltd. All rights reserved.
Technologies to measure and modify physical activity and eating environments.
King, Abby C; Glanz, Karen; Patrick, Kevin
2015-05-01
The explosion of technologic advances in information capture and delivery offers unparalleled opportunities to assess and modify built and social environments in ways that can positively impact health behaviors. This paper highlights some potentially transformative current and emerging trends in the technology arena applicable to environmental context-based assessment and intervention relevant to physical activity and dietary behaviors. A team of experts convened in 2013 to discuss the main issues related to technology use in assessing and changing built environments for health behaviors particularly relevant to obesity prevention. Each expert was assigned a specific domain to describe, commensurate with their research and expertise in the field, along with examples of specific applications. This activity was accompanied by selective examination of published literature to cover the main issues and elucidate relevant applications of technologic tools and innovations in this field. Decisions concerning which technology examples to highlight were reached through discussion and consensus-building among the team of experts. Two levels of impact are highlighted: the "me" domain, which primarily targets measurement and intervention activities aimed at individual-level behaviors and their surrounding environments; and the "we" domain, which generally focuses on aggregated data aimed at groups and larger population segments and locales. The paper ends with a set of challenges and opportunities for significantly advancing the field. Key areas for progress include data collection and expansion, managing technologic considerations, and working across sectors to maximize the population potential of behavioral health technologies. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.
Michael T. Bogan; Oscar Gutierrez-Ruacho; J. Andres Alvarado-Castro; David A. Lytle
2013-01-01
Aquatic environments in the Madrean Sky Islands (MSI) consist of a matrix of perennial and intermittent stream segments, seasonal ponds, and human-built cattle trough habitats that support a diverse suite of aquatic macroinvertebrates. Although environmental conditions and aquatic communities are generally distinct in lotic and lentic habitats, MSI streams are...
Zhang, Xiaoyong; van der Lans, Ivo; Dagevos, Hans
2012-01-01
To simultaneously identify consumer segments based on individual-level consumption and community-level food retail environment data and to investigate whether the segments are associated with BMI and dietary knowledge in China. A multilevel latent class cluster model was applied to identify consumer segments based not only on their individual preferences for fast food, salty snack foods, and soft drinks and sugared fruit drinks, but also on the food retail environment at the community level. The data came from the China Health and Nutrition Survey (CHNS) conducted in 2006 and two questionnaires for adults and communities were used. A total sample of 9788 adults living in 218 communities participated in the CHNS. We successfully identified four consumer segments. These four segments were embedded in two types of food retail environment: the saturated food retail environment and the deprived food retail environment. A three-factor solution was found for consumers' dietary knowledge. The four consumer segments were highly associated with consumers' dietary knowledge and a number of sociodemographic variables. The widespread discussion about the relationships between fast-food consumption and overweight/obesity is irrelevant for Chinese segments that do not have access to fast food. Factors that are most associated with segments with a higher BMI are consumers' (incorrect) dietary knowledge, the food retail environment and sociodemographics. The results provide valuable insight for policy interventions on reducing overweight/obesity in China. This study also indicates that despite the breathtaking changes in modern China, the impact of 'obesogenic' environments should not be assessed too strictly from a 'Western' perspective.
Schüle, Steffen Andreas; Bolte, Gabriele
2015-01-01
The research question how contextual factors of neighbourhood environments influence individual health has gained increasing attention in public health research. Both socioeconomic neighbourhood characteristics and factors of the built environment play an important role for health and health-related behaviours. However, their reciprocal relationships have not been systematically reviewed so far. This systematic review aims to identify studies applying a multilevel modelling approach which consider both neighbourhood socioeconomic position (SEP) and factors of the objective built environment simultaneously in order to disentangle their independent and interactive effects on individual health. The three databases PubMed, PsycINFO, and Web of Science were systematically searched with terms for title and abstract screening. Grey literature was not included. Observational studies from USA, Canada, Australia, New Zealand, and Western European countries were considered which analysed simultaneously factors of neighbourhood SEP and the objective built environment with a multilevel modelling approach. Adjustment for individual SEP was a further inclusion criterion. Thirty-three studies were included in qualitative synthesis. Twenty-two studies showed an independent association between characteristics of neighbourhood SEP or the built environment and individual health outcomes or health-related behaviours. Twenty-one studies found cross-level or within-level interactions either between neighbourhood SEP and the built environment, or between neighbourhood SEP or the built environment and individual characteristics, such as sex, individual SEP or ethnicity. Due to the large variation of study design and heterogeneous reporting of results the identification of consistent findings was problematic and made quantitative analysis not possible. There is a need for studies considering multiple neighbourhood dimensions and applying multilevel modelling in order to clarify their causal relationship towards individual health. Especially, more studies using comparable characteristics of neighbourhood SEP and the objective built environment and analysing interactive effects are necessary to disentangle health impacts and identify vulnerable neighbourhoods and population groups.
Schüle, Steffen Andreas; Bolte, Gabriele
2015-01-01
Background The research question how contextual factors of neighbourhood environments influence individual health has gained increasing attention in public health research. Both socioeconomic neighbourhood characteristics and factors of the built environment play an important role for health and health-related behaviours. However, their reciprocal relationships have not been systematically reviewed so far. This systematic review aims to identify studies applying a multilevel modelling approach which consider both neighbourhood socioeconomic position (SEP) and factors of the objective built environment simultaneously in order to disentangle their independent and interactive effects on individual health. Methods The three databases PubMed, PsycINFO, and Web of Science were systematically searched with terms for title and abstract screening. Grey literature was not included. Observational studies from USA, Canada, Australia, New Zealand, and Western European countries were considered which analysed simultaneously factors of neighbourhood SEP and the objective built environment with a multilevel modelling approach. Adjustment for individual SEP was a further inclusion criterion. Results Thirty-three studies were included in qualitative synthesis. Twenty-two studies showed an independent association between characteristics of neighbourhood SEP or the built environment and individual health outcomes or health-related behaviours. Twenty-one studies found cross-level or within-level interactions either between neighbourhood SEP and the built environment, or between neighbourhood SEP or the built environment and individual characteristics, such as sex, individual SEP or ethnicity. Due to the large variation of study design and heterogeneous reporting of results the identification of consistent findings was problematic and made quantitative analysis not possible. Conclusions There is a need for studies considering multiple neighbourhood dimensions and applying multilevel modelling in order to clarify their causal relationship towards individual health. Especially, more studies using comparable characteristics of neighbourhood SEP and the objective built environment and analysing interactive effects are necessary to disentangle health impacts and identify vulnerable neighbourhoods and population groups. PMID:25849569
JWST Lightweight Mirror TRL-6 Results
NASA Technical Reports Server (NTRS)
Stahl, H. Philip
2007-01-01
Mirror technology for a Primary Mirror Segment Assembly (PMSA) is a system of components: reflective coating; polished optical surface; mirror substrate; actuators, mechanisms and flexures; and reaction structure. The functional purpose of a PMSA is to survive launch, deploy and align itself to form a 25 square meter collecting area 6.5 meter diameter primary mirror with a 131 nm rms wavefront error at temperatures less than 50K and provide stable optical performance for the anticipated thermal environment. At the inception of JWST in 1996, such a capability was at a Technology Readiness Level (TRL) of 3. A highly successful technology development program was initiated including the Sub-scale Beryllium Mirror Demonstrator (SBMD) and Advanced Mirror System Demonstrator (AMSD) projects. These projects along with flight program activities have matured mirror technology for JWST to TRL-6. A directly traceable prototype (and in some cases the flight hardware itself) has been built, tested and operated in a relevant environment.
Three Dimensional Urban Characterization by IFSAR Measurements
NASA Technical Reports Server (NTRS)
Gamba, P.; Houshmand, B.
1998-01-01
In this paper a machine vision approach is applied to Interferometric Synthetic Aperture Radars (IFSAR) data to extract the most relevant built structures in a dense urban environment. The algorithm tries to cluster primitives (line segments) into more complex surfaces (planes) to approximate the 3D shape of these objects. Very interesting results starting from TOPSAR data recorded over S, Monica are presented.
The unbuilt environment: culture moderates the built environment for physical activity.
Perrin, Andrew J; Caren, Neal; Skinner, Asheley C; Odulana, Adebowale; Perrin, Eliana M
2016-12-05
While research has demonstrated a link between the built environment and obesity, much variation remains unexplained. Physical features are necessary, but not sufficient, for physical activity: residents must choose to use these features in health-promoting ways. This article reveals a role for local culture in tempering the effect of the physical environment on physical activity behaviors. We developed Systematic Cultural Observation (SCO) to observe place-based, health-related culture in Lenoir County, NC (population ~60,000). Photographs (N = 6450) were taken systematically from 150 most-used road segments and geocoded. Coders assessed physical activity (PA) opportunities (e.g., public or private activity spaces, pedestrian-friendly features) and presence of people in each photograph. 28.7% of photographs contained some PA feature. Most were private or pedestrian; 3.1% contained public PA space. Only 1.5% of photographs with any PA features (2% of those with public PA space, 0.7% of those with private) depicted people despite appropriate weather and daylight conditions. Even when PA opportunities existed in this rural county, they were rarely used. This may be the result of culture ("unbuilt environment") that disfavors physical activity even in the presence of features that allow it. Policies promoting built environments designed for healthy lifestyles should consider local culture (shared styles, skills, habits, and beliefs) to maximize positive outcomes.
NASA Astrophysics Data System (ADS)
Butell, Bart
1996-02-01
Microsoft's Visual Basic (VB) and Borland's Delphi provide an extremely robust programming environment for delivering multimedia solutions for interactive kiosks, games and titles. Their object oriented use of standard and custom controls enable a user to build extremely powerful applications. A multipurpose, database enabled programming environment that can provide an event driven interface functions as a multimedia kernel. This kernel can provide a variety of authoring solutions (e.g. a timeline based model similar to Macromedia Director or a node authoring model similar to Icon Author). At the heart of the kernel is a set of low level multimedia components providing object oriented interfaces for graphics, audio, video and imaging. Data preparation tools (e.g., layout, palette and Sprite Editors) could be built to manage the media database. The flexible interface for VB allows the construction of an infinite number of user models. The proliferation of these models within a popular, easy to use environment will allow the vast developer segment of 'producer' types to bring their ideas to the market. This is the key to building exciting, content rich multimedia solutions. Microsoft's VB and Borland's Delphi environments combined with multimedia components enable these possibilities.
Zapata-Diomedi, Belen; Gunn, Lucy; Giles-Corti, Billie; Shiell, Alan; Lennert Veerman, J
2018-01-01
The built environment has a significant influence on population levels of physical activity (PA) and therefore health. However, PA-related health benefits are seldom considered in transport and urban planning (i.e. built environment interventions) cost-benefit analysis. Cost-benefit analysis implies that the benefits of any initiative are valued in monetary terms to make them commensurable with costs. This leads to the need for monetised values of the health benefits of PA. The aim of this study was to explore a method for the incorporation of monetised PA-related health benefits in cost-benefit analysis of built environment interventions. Firstly, we estimated the change in population level of PA attributable to a change in the built environment due to the intervention. Then, changes in population levels of PA were translated into monetary values. For the first step we used estimates from the literature for the association of built environment features with physical activity outcomes. For the second step we used the multi-cohort proportional multi-state life table model to predict changes in health-adjusted life years and health care costs as a function of changes in PA. Finally, we monetised health-adjusted life years using the value of a statistical life year. Future research could adapt these methods to assess the health and economic impacts of specific urban development scenarios by working in collaboration with urban planners. Copyright © 2017 Elsevier Inc. All rights reserved.
Tuckett, Anthony G; Banchoff, Ann W; Winter, Sandra J; King, Abby C
2018-03-01
This paper presents a review of the literature about the built environment as it impacts the health of older people. It then introduces the gerontological nurse and researcher to the Our Voice framework for engaging older people as citizen scientists in order to empower them as agents of change in improving their local built environment and ultimately advancing community health. Community-level strategies to promote successful ageing in place are critical both to optimising health outcomes and containing healthcare costs. Such strategies must take into account the influence of the built environment both on individual health behaviours and on overall community health. At the same time, the perspectives and experiences of older people themselves ought to inform policies and practices in a systematic way. Integrative literature review. A wide scan of English language articles published in the EMBASE, PubMed and CINAHL bibliographic databases was conducted. Additional articles were sourced by mining relevant reference lists (i.e., snowball sampling). Papers included were published between 2005 and 2016. Three distinct components emerged from the review: the impact of the built environment on health-in particular the health of older persons; citizen science and its applicability for older people research; and the promise of the Our Voice citizen science framework to activate changes in the built environment that improve older peoples' health. The ageing of the world's population brings with it an increased population-level risk of chronic disease and disability. We present the Our Voice framework, developed by researchers at Stanford University, as a promising strategy for engaging and empowering older people as citizen scientists, as a framework to apply to gerontological nursing and improving community health. Gerontology nurses are encouraged to: (i) Recognise the impact of the built environment and other community-level factors on the health of their patients. (ii) Encourage older adults to take an active role in documenting features of their environments that promote or hinder healthy living. (iii) Support policies and programmes that promote healthy environments. © 2017 John Wiley & Sons Ltd.
Common mental disorders and the built environment in Santiago, Chile.
Araya, Ricardo; Montgomery, Alan; Rojas, Graciela; Fritsch, Rosemarie; Solis, Jaime; Signorelli, Andres; Lewis, Glyn
2007-05-01
There is growing research interest in the influence of the built environment on mental disorders. To estimate the variation in the prevalence of common mental disorders attributable to individuals and the built environment of geographical sectors where they live. A sample of 3870 adults (response rate 90%) clustered in 248 geographical sectors participated in a household cross-sectional survey in Santiago, Chile. Independently rated contextual measures of the built environment were obtained. The Clinical Interview Schedule was used to estimate the prevalence of common mental disorders. There was a significant association between the quality of the built environment of small geographical sectors and the presence of common mental disorders among its residents. The better the quality of the built environment, the lower the scores for psychiatric symptoms; however, only a small proportion of the variation in common mental disorder existed at sector level, after adjusting for individual factors. Findings from our study, using a contextual assessment of the quality of the built environment and multilevel modelling in the analysis, suggest these associations may be more marked in non-Western settings with more homogeneous geographical sectors.
Assessing climate change and health vulnerability at the local level: Travis County, Texas.
Prudent, Natasha; Houghton, Adele; Luber, George
2016-10-01
We created a measure to help comprehend population vulnerability to potential flooding and excessive heat events using health, built environment and social factors. Through principal component analysis (PCA), we created non-weighted sum index scores of literature-reviewed social and built environment characteristics. We created baseline poor health measures using 1999-2005 age-adjusted cardiovascular and combined diabetes and hypertension mortality rates to correspond with social-built environment indices. We mapped US Census block groups by linked age-adjusted mortality and a PCA-created social-built environment index. The goal was to measure flooding and excessive heat event vulnerability as proxies for population vulnerability to climate change for Travis County, Texas. This assessment identified communities where baseline poor health, social marginalisation and built environmental impediments intersected. Such assessments may assist targeted interventions and improve emergency preparedness in identified vulnerable communities, while fostering resilience through the focus of climate change adaptation policies at the local level. No claim to original US government works. Journal compilation © 2016 Overseas Development Institute.
Multilevel built environment features and individual odds of overweight and obesity in Utah
Xu, Yanqing; Wen, Ming; Wang, Fahui
2015-01-01
Based on the data from the Behavioral Risk Factor Surveillance System (BRFSS) in 2007, 2009 and 2011 in Utah, this research uses multilevel modeling (MLM) to examine the associations between neighborhood built environments and individual odds of overweight and obesity after controlling for individual risk factors. The BRFSS data include information on 21,961 individuals geocoded to zip code areas. Individual variables include BMI (body mass index) and socio-demographic attributes such as age, gender, race, marital status, education attainment, employment status, and whether an individual smokes. Neighborhood built environment factors measured at both zip code and county levels include street connectivity, walk score, distance to parks, and food environment. Two additional neighborhood variables, namely the poverty rate and urbanicity, are also included as control variables. MLM results show that at the zip code level, poverty rate and distance to parks are significant and negative covariates of the odds of overweight and obesity; and at the county level, food environment is the sole significant factor with stronger fast food presence linked to higher odds of overweight and obesity. These findings suggest that obesity risk factors lie in multiple neighborhood levels and built environment features need to be defined at a neighborhood size relevant to residents' activity space. PMID:26251559
Hirsch, Jana A.; Moore, Kari A.; Clarke, Philippa J.; Rodriguez, Daniel A.; Evenson, Kelly R.; Brines, Shannon J.; Zagorski, Melissa A.; Diez Roux, Ana V.
2014-01-01
Lack of longitudinal research hinders causal inference on the association between the built environment and walking. In the present study, we used data from 6,027 adults in the Multi-Ethnic Study of Atherosclerosis who were 45–84 years of age at baseline to investigate the association of neighborhood built environment with trends in the amount of walking between 2000 and 2012. Walking for transportation and walking for leisure were assessed at baseline and at 3 follow-up visits (median follow-up = 9.15 years). Time-varying built environment measures (measures of population density, land use, number of destinations, bus access, and street connectivity) were created using geographic information systems. We used linear mixed models to estimate the associations between baseline levels of and a change in each built environment feature and a change in the frequency of walking. After adjustment for potential confounders, we found that higher baseline levels of population density, area zoned for retail, social destinations, walking destinations, and street connectivity were associated with greater increases in walking for transportation over time. Higher baseline levels of land zoned for residential use and distance to buses were associated with less pronounced increases (or decreases) in walking for transportation over time. Increases in the number of social destinations, the number of walking destinations, and street connectivity over time were associated with greater increases in walking for transportation. Higher baseline levels of both land zoned for retail and walking destinations were associated with greater increases in leisure walking, but no changes in built environment features were associated with leisure walking. The creation of mixed-use, dense developments may encourage adults to incorporate walking for transportation into their everyday lives. PMID:25234431
Public spaces and urban sustainability in the tropical built environment
NASA Astrophysics Data System (ADS)
Yusof, Y. M.; Kozlowski, M.
2018-01-01
Sustainability is an overarching sense of responsibility towards the future. On a city-wide level, urban sustainability incorporates a wide body of changes especially as they relate to the built environment, all of which intended at creating a livable place. This paper discusses existing public spaces in view of their achievement against a set of criteria for the built environment. The paper introduces performance design criteria for the tropical built environment. The key findings indicate that long-term strategies, guidance and directions for the city and region can achieve development which corresponds to local climate, synergies and provide a higher proportion of public spaces that offer something for everyone.
Effects of environmental design on patient outcome: a systematic review.
Laursen, Jannie; Danielsen, Anne; Rosenberg, Jacob
2014-01-01
The aim of this systematic review was to assess how inpatients were affected by the built environment design during their hospitalization. Over the last decade, the healthcare system has become increasingly aware of how focus on healthcare environment might affect patient satisfaction. The focus on environmental design has become a field with great potential because of its possible impact on cost control while improving quality of care. A systematic literature search was conducted to identify current and past studies about evidence-based healthcare design. The following databases were searched: Medline/PubMed, Cinahl, and Embase. Inclusion criteria were randomized clinical trials (RCTs) investigating the effect of built environment design interventions such as music, natural murals, and plants in relation to patients' health outcome. Built environment design aspects such as audio environment and visual environment had a positive influence on patients' health outcomes. Specifically the studies indicated a decrease in patients' anxiety, pain, and stress levels when exposed to certain built environment design interventions. The built environment, especially specific audio and visual aspects, seems to play an important role in patients' outcomes, making hospitals a better healing environment for patients. Built environment, evidence-based design, healing environments, hospitals, literature review.
Hager, Erin R; Witherspoon, Dawn O; Gormley, Candice; Latta, Laura W; Pepper, M Reese; Black, Maureen M
2013-02-01
Neighborhood perceived/built environment and physical activity (PA) associations have been examined for adolescents around homes, but not surrounding schools. The purpose of this paper is to examine if positive perceptions/built environment in neighborhoods surrounding schools predict PA among low-income, urban adolescent girls. Measures include: minutes in moderate-vigorous PA (MVPA, ankle accelerometry), perceptions of the school environment (questionnaire), built environment (neighborhood audit). Analyses include multi-level models. Two hundred twenty-four sixth and seventh grade girls [mean(sd) age = 12.1(0.7) years] from 12 schools serving low-income, primarily African American communities; mean MVPA 35.4 min (mean days assessed = 5.8). Girls in schools with more positive perceptions of the neighborhood environment surrounding the school were less active (β = 7.2, p = 0.043). Having "places to go within walking distance" (perceptions) and number of food stores near school (built environment) positively relate to MVPA (β = 5.5, p = 0.042 and β = 0.59, p = 0.047). Among neighborhoods surrounding urban schools, positive perceptions do not predict PA; accessibility, via both perceived and built environment, support PA.
NASA Astrophysics Data System (ADS)
Abhijith, K. V.; Kumar, Prashant; Gallagher, John; McNabola, Aonghus; Baldauf, Richard; Pilla, Francesco; Broderick, Brian; Di Sabatino, Silvana; Pulvirenti, Beatrice
2017-08-01
Intensifying the proportion of urban green infrastructure has been considered as one of the remedies for air pollution levels in cities, yet the impact of numerous vegetation types deployed in different built environments has to be fully synthesised and quantified. This review examined published literature on neighbourhood air quality modifications by green interventions. Studies were evaluated that discussed personal exposure to local sources of air pollution under the presence of vegetation in open road and built-up street canyon environments. Further, we critically evaluated the available literature to provide a better understanding of the interactions between vegetation and surrounding built-up environments and ascertain means of reducing local air pollution exposure using green infrastructure. The net effects of vegetation in each built-up environment are also summarised and possible recommendations for the future design of green infrastructure are proposed. In a street canyon environment, high-level vegetation canopies (trees) led to a deterioration in air quality, while low-level green infrastructure (hedges) improved air quality conditions. For open road conditions, wide, low porosity and tall vegetation leads to downwind pollutant reductions while gaps and high porosity vegetation could lead to no improvement or even deteriorated air quality. The review considers that generic recommendations can be provided for vegetation barriers in open road conditions. Green walls and roofs on building envelopes can also be used as effective air pollution abatement measures. The critical evaluation of the fundamental concepts and the amalgamation of key technical features of past studies by this review could assist urban planners to design and implement green infrastructures in the built environment.
Eisenberg, Yochai; Vanderbom, Kerri A; Vasudevan, Vijay
2017-02-01
The relationship between the built environment and physical activity has been well documented. However, little is known about how the built environment affects physical activity among people with disabilities, who have disproportionately higher rates of physical inactivity and obesity. This study is the first systematic review to examine the role of the built environment as a moderator of the relationship between having a disability (physical, sensory or cognitive) and lower levels of physical activity. After conducting an extensive search of the literature published between 1990 and 2015, 2039 articles were screened, 126 were evaluated by abstract and 66 by full text for eligibility in the review. Data were abstracted using a predefined coding guide and synthesized from both qualitative and quantitative studies to examine evidence of moderation. Nine quantitative and six qualitative articles met the inclusion criteria. Results showed that most research to date has been on older adults with physical disabilities. People with disabilities described how aspects of the built environment affect neighborhood walking, suggesting a positive moderating role of features related to safety and aesthetic qualities, such as benches, lighting and stop light timing. There were mixed results among studies that examined the relationship quantitatively. Most of the studies were not designed to appropriately examine moderation. Future research should utilize valid and reliable built environment measures that are more specific to disability and should include people with and without disabilities to allow for testing of moderation of the built environment. Copyright © 2016 Elsevier Inc. All rights reserved.
Hoehner, Christine M.; Allen, Peg; Barlow, Carolyn E.; Marx, Christine M.; Brownson, Ross C.; Schootman, Mario
2013-01-01
This observational study examined the associations of built environment features around the home and workplace with cardiorespiratory fitness (CRF) based on a treadmill test and body mass index (BMI) (weight (kg)/height (m)2). The study included 8,857 adults aged 20–88 years who completed a preventive medical examination in 2000–2007 while living in 12 Texas counties. Analyses examining workplace neighborhood characteristics included a subset of 4,734 participants. Built environment variables were derived around addresses by using geographic information systems. Models were adjusted for individual-level and census block group–level demographics and socioeconomic status, smoking, BMI (in CRF models), and all other home or workplace built environment variables. CRF was associated with higher intersection density, higher number of private exercise facilities around the home and workplace, larger area of vegetation around the home, and shorter distance to the closest city center. Aside from vegetation, these same built environment features around the home were also associated with BMI. Participants who lived and worked in neighborhoods in the lowest tertiles for intersection density and the number of private exercise facilities had lower CRF and higher BMI values than participants who lived and worked in higher tertiles for these variables. This study contributes new evidence to suggest that built environment features around homes and workplaces may affect health. PMID:23942215
Brázdová, Zuzana Derflerová; Klimusová, Helena; Hruška, Dalibor; Prokopová, Alice; Burjanek, Aleš; Wulff, Krauff Rainer Schwanhaeuser
2015-11-01
Research on physical activity in relation to obesity gradually becomes more focused on environmental determinants, which can potentially influence people's health choices. The present article addresses the topic of physical activity from a wider sociological perspective. Our pilot study was designed with the objective of testing the applicability of a method included in the EC 6th Framework Programme EURO-PREVOB, in the Czech context. The method examines specific determinants of the built environment that can have an impact on physical activity at the population level. In addition, the study aims to analyze possible differences in built environment indicators and their relation to the physical activity of people living in neighbourhoods with areas of varying socioeconomic status. The field study was carried out in the city of Brno, Czech Republic, in 5 neighbourhood quintiles, i.e. areas divided according to the socioeconomic status of local residents. In each quintile, we evaluated the quality of the built environment according to the quality, aesthetics and safety of segregated cycle facilities, playgrounds/playing areas, public open spaces, marked road crossings and pavements as well as signs of incivilities and devastation. Between the five quintiles, significant differences were found in the quality of parks and playgrounds/playing areas, pavements, marking of pedestrian crossings, and in general aesthetics, i.e. signs of incivilities and devastation of the built environment. No differences were found in the quality and use of cycle facilities. The method we used for the evaluation of the built environment proved highly applicable in Czech populated areas. Monitoring of built environment indicators in the Czech Republic should provide a basis for health maps, showing potential associations between the prevalence of high-incidence, non-infectious diseases and various social determinants of physical activity. This information might help in achieving an improvement in these determinants at a community level and promoting an increase in physical activity at the population level. Copyright© by the National Institute of Public Health, Prague 2015.
Space station automation of common module power management and distribution
NASA Technical Reports Server (NTRS)
Miller, W.; Jones, E.; Ashworth, B.; Riedesel, J.; Myers, C.; Freeman, K.; Steele, D.; Palmer, R.; Walsh, R.; Gohring, J.
1989-01-01
The purpose is to automate a breadboard level Power Management and Distribution (PMAD) system which possesses many functional characteristics of a specified Space Station power system. The automation system was built upon 20 kHz ac source with redundancy of the power buses. There are two power distribution control units which furnish power to six load centers which in turn enable load circuits based upon a system generated schedule. The progress in building this specified autonomous system is described. Automation of Space Station Module PMAD was accomplished by segmenting the complete task in the following four independent tasks: (1) develop a detailed approach for PMAD automation; (2) define the software and hardware elements of automation; (3) develop the automation system for the PMAD breadboard; and (4) select an appropriate host processing environment.
Coghill, Cara-Lee; Valaitis, Ruta K; Eyles, John D
2015-05-03
Few studies to date have explored the relationship between the built environment and physical activity specifically in rural settings. The Ontario Public Health Standards policies mandate that health units in Ontario address the built environment; however, it is unclear how public health practitioners are integrating the built environment into public health interventions aimed at improving physical activity in chronic disease prevention programs. This descriptive qualitative study explored interventions that have or are being implemented which address the built environment specifically related to physical activity in rural Ontario health units, and the impact of these interventions. Data were collected through twelve in-depth semi-structured interviews with rural public health practitioners and managers representing 12 of 13 health units serving rural communities. Key themes were identified using qualitative content analysis. Themes that emerged regarding the types of interventions that health units are employing included: Engagement with policy work at a municipal level; building and working with community partners, committees and coalitions; gathering and providing evidence; developing and implementing programs; and social marketing and awareness raising. Evaluation of interventions to date has been limited. Public health interventions, and their evaluations, are complex. Health units who serve large rural populations in Ontario are engaging in numerous activities to address physical activity levels. There is a need to further evaluate the impact of these interventions on population health.
van Wijk, Daniël C; Groeniger, Joost Oude; van Lenthe, Frank J; Kamphuis, Carlijn B M
2017-03-31
This study examined whether characteristics of the residential built environment (i.e. population density, level of mixed land use, connectivity, accessibility of facilities, accessibility of green) contributed to educational inequalities in walking and cycling among adults. Data from participants (32-82 years) of the 2011 survey of the Dutch population-based GLOBE study were used (N = 2375). Highest attained educational level (independent variable) and walking for transport, cycling for transport, walking in leisure time and cycling in leisure time (dependent variables) were self-reported in the survey. GIS-systems were used to obtain spatial data on residential built environment characteristics. A four-step mediation-based analysis with log-linear regression models was used to examine to contribution of the residential built environment to educational inequalities in walking and cycling. As compared to the lowest educational group, the highest educational group was more likely to cycle for transport (RR 1.13, 95% CI 1.04-1.23), walk in leisure time (RR 1.12, 95% CI 1.04-1.21), and cycle in leisure time (RR 1.12, 95% CI 1.03-1.22). Objective built environment characteristics were related to these outcomes, but contributed minimally to educational inequalities in walking and cycling. On the other hand, compared to the lowest educational group, the highest educational group was less likely to walk for transport (RR 0.91, 95% CI 0.82-1.01), which could partly be attributed to differences in the built environment. This study found that objective built environment characteristics contributed minimally to educational inequalities in walking and cycling in the Netherlands.
Racial residential segregation and preterm birth: built environment as a mediator.
Anthopolos, Rebecca; Kaufman, Jay S; Messer, Lynne C; Miranda, Marie Lynn
2014-05-01
Racial residential segregation has been associated with preterm birth. Few studies have examined mediating pathways, in part because, with binary outcomes, indirect effects estimated from multiplicative models generally lack causal interpretation. We develop a method to estimate additive-scale natural direct and indirect effects from logistic regression. We then evaluate whether segregation operates through poor-quality built environment to affect preterm birth. To estimate natural direct and indirect effects, we derive risk differences from logistic regression coefficients. Birth records (2000-2008) for Durham, North Carolina, were linked to neighborhood-level measures of racial isolation and a composite construct of poor-quality built environment. We decomposed the total effect of racial isolation on preterm birth into direct and indirect effects. The adjusted total effect of an interquartile increase in racial isolation on preterm birth was an extra 27 preterm events per 1000 births (risk difference = 0.027 [95% confidence interval = 0.007 to 0.047]). With poor-quality built environment held at the level it would take under isolation at the 25th percentile, the direct effect of an interquartile increase in isolation was 0.022 (-0.001 to 0.042). Poor-quality built environment accounted for 35% (11% to 65%) of the total effect. Our methodology facilitates the estimation of additive-scale natural effects with binary outcomes. In this study, the total effect of racial segregation on preterm birth was partially mediated by poor-quality built environment.
Hirsch, Jana A; Moore, Kari A; Clarke, Philippa J; Rodriguez, Daniel A; Evenson, Kelly R; Brines, Shannon J; Zagorski, Melissa A; Diez Roux, Ana V
2014-10-15
Lack of longitudinal research hinders causal inference on the association between the built environment and walking. In the present study, we used data from 6,027 adults in the Multi-Ethnic Study of Atherosclerosis who were 45-84 years of age at baseline to investigate the association of neighborhood built environment with trends in the amount of walking between 2000 and 2012. Walking for transportation and walking for leisure were assessed at baseline and at 3 follow-up visits (median follow-up = 9.15 years). Time-varying built environment measures (measures of population density, land use, number of destinations, bus access, and street connectivity) were created using geographic information systems. We used linear mixed models to estimate the associations between baseline levels of and a change in each built environment feature and a change in the frequency of walking. After adjustment for potential confounders, we found that higher baseline levels of population density, area zoned for retail, social destinations, walking destinations, and street connectivity were associated with greater increases in walking for transportation over time. Higher baseline levels of land zoned for residential use and distance to buses were associated with less pronounced increases (or decreases) in walking for transportation over time. Increases in the number of social destinations, the number of walking destinations, and street connectivity over time were associated with greater increases in walking for transportation. Higher baseline levels of both land zoned for retail and walking destinations were associated with greater increases in leisure walking, but no changes in built environment features were associated with leisure walking. The creation of mixed-use, dense developments may encourage adults to incorporate walking for transportation into their everyday lives. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Distributed Lag Models: Examining Associations between the Built Environment and Health
Baek, Jonggyu; Sánchez, Brisa N.; Berrocal, Veronica J.; Sanchez-Vaznaugh, Emma V.
2016-01-01
Built environment factors constrain individual level behaviors and choices, and thus are receiving increasing attention to assess their influence on health. Traditional regression methods have been widely used to examine associations between built environment measures and health outcomes, where a fixed, pre-specified spatial scale (e.g., 1 mile buffer) is used to construct environment measures. However, the spatial scale for these associations remains largely unknown and misspecifying it introduces bias. We propose the use of distributed lag models (DLMs) to describe the association between built environment features and health as a function of distance from the locations of interest and circumvent a-priori selection of a spatial scale. Based on simulation studies, we demonstrate that traditional regression models produce associations biased away from the null when there is spatial correlation among the built environment features. Inference based on DLMs is robust under a range of scenarios of the built environment. We use this innovative application of DLMs to examine the association between the availability of convenience stores near California public schools, which may affect children’s dietary choices both through direct access to junk food and exposure to advertisement, and children’s body mass index z-scores (BMIz). PMID:26414942
Do Inequalities in Neighborhood Walkability Drive Disparities in Older Adults' Outdoor Walking?
Zandieh, Razieh; Flacke, Johannes; Martinez, Javier; Jones, Phil; van Maarseveen, Martin
2017-07-07
Older residents of high-deprivation areas walk less than those of low-deprivation areas. Previous research has shown that neighborhood built environment may support and encourage outdoor walking. The extent to which the built environment supports and encourages walking is called "walkability". This study examines inequalities in neighborhood walkability in high- versus low-deprivation areas and their possible influences on disparities in older adults' outdoor walking levels. For this purpose, it focuses on specific neighborhood built environment attributes (residential density, land-use mix and intensity, street connectivity, and retail density) relevant to neighborhood walkability. It applied a mixed-method approach, included 173 participants (≥65 years), and used a Geographic Information System (GIS) and walking interviews (with a sub-sample) to objectively and subjectively measure neighborhood built environment attributes. Outdoor walking levels were measured by using the Geographic Positioning System (GPS) technology. Data on personal characteristics was collected by completing a questionnaire. The results show that inequalities in certain land-use intensity (i.e., green spaces, recreation centers, schools and industries) in high- versus low-deprivation areas may influence disparities in older adults' outdoor walking levels. Modifying neighborhood land use intensity may help to encourage outdoor walking in high-deprivation areas.
Stankov, Ivana; Howard, Natasha J; Daniel, Mark; Cargo, Margaret
2017-02-09
An underrepresentation of stakeholder perspectives within urban health research arguably limits our understanding of what is a multi-dimensional and complex relationship between the built environment and health. By engaging a wide range of stakeholders using a participatory concept mapping approach, this study aimed to achieve a more holistic and nuanced understanding of the built environments shaping disease risk, specifically cardiometabolic risk (CMR). Moreover, this study aimed to ascertain the importance and changeability of identified environments through government action. Through the concept mapping process, community members, researchers, government and non-government stakeholders collectively identified eleven clusters encompassing 102 built environmental domains related to CMR, a number of which are underrepresented within the literature. Among the identified built environments, open space, public transportation and pedestrian environments were highlighted as key targets for policy intervention. Whilst there was substantive convergence in stakeholder groups' perspectives concerning the built environment and CMR, there were disparities in the level of importance government stakeholders and community members respectively assigned to pedestrian environments and street connectivity. These findings support the role of participatory methods in strengthening how urban health issues are understood and in affording novel insights into points of action for public health and policy intervention.
The Built Environment and Childhood Obesity in Durham, NC
Miranda, Marie Lynn; Edwards, Sharon E.; Anthopolos, Rebecca; Dolinsky, Diana H.; Kemper, Alex R.
2013-01-01
The relationship between childhood obesity and aspects of the built environment characterizing neighborhood social context is understudied. We evaluate the association between seven built environment domains and childhood obesity in Durham, NC. Measures of housing damage, property disorder, vacancy, nuisances, and territoriality were constructed using data from a 2008 community assessment. Renter-occupied housing and crime measures were developed from public databases. We linked these measures to 2008–2009 Duke University Medical Center pediatric preventive care visits. Age- and sex-specific body mass index percentiles were used to classify children as normal weight (>5th and ≤ 85th percentile), overweight (>85th and ≤ 95th percentile), or obese (> 95th percentile). Ordinal logistic regression models with cluster-corrected standard errors evaluated the association between weight status and the built environment. Adjusting for child-level socioeconomic characteristics, nuisances and crime were associated with childhood overweight/obesity (P<0.05). Built environment characteristics appear important to childhood weight status in Durham, NC. PMID:22563061
Wood, Lisa; Shannon, Tya; Bulsara, Max; Pikora, Terri; McCormack, Gavin; Giles-Corti, Billie
2008-03-01
This study explored the relationship between social capital and aspects of the built environment, focusing in particular on the walkability of suburbs as determined by street network design and the mix of land uses. We measured social capital and feelings of personal safety in 335 residents of three suburbs in metropolitan Perth, WA, and collected objective and perceived data on the built environment. After adjustment for demographic factors, the built environment was found to have a significant but small effect on social capital and feelings of safety, particularly in relation to the number and perceived adequacy of destinations. A high level of neighbourhood upkeep was associated with both higher social capital and feelings of safety.
Le, T Hoang Ngan; Luu, Khoa; Savvides, Marios
2013-08-01
Robust facial hair detection and segmentation is a highly valued soft biometric attribute for carrying out forensic facial analysis. In this paper, we propose a novel and fully automatic system, called SparCLeS, for beard/moustache detection and segmentation in challenging facial images. SparCLeS uses the multiscale self-quotient (MSQ) algorithm to preprocess facial images and deal with illumination variation. Histogram of oriented gradients (HOG) features are extracted from the preprocessed images and a dynamic sparse classifier is built using these features to classify a facial region as either containing skin or facial hair. A level set based approach, which makes use of the advantages of both global and local information, is then used to segment the regions of a face containing facial hair. Experimental results demonstrate the effectiveness of our proposed system in detecting and segmenting facial hair regions in images drawn from three databases, i.e., the NIST Multiple Biometric Grand Challenge (MBGC) still face database, the NIST Color Facial Recognition Technology FERET database, and the Labeled Faces in the Wild (LFW) database.
Automatic segmentation of trees in dynamic outdoor environments
USDA-ARS?s Scientific Manuscript database
Segmentation in dynamic outdoor environments can be difficult when the illumination levels and other aspects of the scene cannot be controlled. Specifically in agricultural contexts, a background material is often used to shield a camera's field of view from other rows of crops. In this paper, we ...
A novel tool for assessing and summarizing the built environment
2012-01-01
Background A growing corpus of research focuses on assessing the quality of the local built environment and also examining the relationship between the built environment and health outcomes and indicators in communities. However, there is a lack of research presenting a highly resolved, systematic, and comprehensive spatial approach to assessing the built environment over a large geographic extent. In this paper, we contribute to the built environment literature by describing a tool used to assess the residential built environment at the tax parcel-level, as well as a methodology for summarizing the data into meaningful indices for linkages with health data. Methods A database containing residential built environment variables was constructed using the existing body of literature, as well as input from local community partners. During the summer of 2008, a team of trained assessors conducted an on-foot, curb-side assessment of approximately 17,000 tax parcels in Durham, North Carolina, evaluating the built environment on over 80 variables using handheld Global Positioning System (GPS) devices. The exercise was repeated again in the summer of 2011 over a larger geographic area that included roughly 30,700 tax parcels; summary data presented here are from the 2008 assessment. Results Built environment data were combined with Durham crime data and tax assessor data in order to construct seven built environment indices. These indices were aggregated to US Census blocks, as well as to primary adjacency communities (PACs) and secondary adjacency communities (SACs) which better described the larger neighborhood context experienced by local residents. Results were disseminated to community members, public health professionals, and government officials. Conclusions The assessment tool described is both easily-replicable and comprehensive in design. Furthermore, our construction of PACs and SACs introduces a novel concept to approximate varying scales of community and describe the built environment at those scales. Our collaboration with community partners at all stages of the tool development, data collection, and dissemination of results provides a model for engaging the community in an active research program. PMID:23075269
Teaching Children about Aspects of Comfort in the Built Environment
ERIC Educational Resources Information Center
Kowaltowski, Doris C. C. K.; Filho, Francisco Borges; Labaki, Lucila C.; Pina, Silvia A. Mikami G.; Bernardi, Nubia
2004-01-01
This article presents specific teaching material for the primary school level that introduces basic concepts of environmental comfort. The authors developed 2 booklets to make children aware of the built environment. Following a postoccupancy evaluation of state schools in the city of Campinas, in the state of Sao Paulo, Brazil, the research team…
Intensifying the proportion of urban green infrastructure has been considered as one of the remedies for air pollution levels in cities, yet the impact of numerous vegetation types deployed in different built environments has to be fully synthesised and quantified. This review ex...
Zandieh, Razieh; Martinez, Javier; Flacke, Johannes; Jones, Phil; van Maarseveen, Martin
2016-11-25
Older adults living in high-deprivation areas walk less than those living in low-deprivation areas. Previous research has shown that older adults' outdoor walking levels are related to the neighbourhood built environment. This study examines inequalities in perceived built environment attributes (i.e., safety, pedestrian infrastructure and aesthetics) and their possible influences on disparities in older adults' outdoor walking levels in low- and high-deprivation areas of Birmingham, United Kingdom. It applied a mixed-method approach, included 173 participants (65 years and over), used GPS technology to measure outdoor walking levels, used questionnaires (for all participants) and conducted walking interviews (with a sub-sample) to collect data on perceived neighbourhood built environment attributes. The results show inequalities in perceived neighbourhood safety, pedestrian infrastructure and aesthetics in high- versus low-deprivation areas and demonstrate that they may influence disparities in participants' outdoor walking levels. Improvements of perceived neighbourhood safety, pedestrian infrastructure and aesthetic in high-deprivation areas are encouraged.
Zandieh, Razieh; Martinez, Javier; Flacke, Johannes; Jones, Phil; van Maarseveen, Martin
2016-01-01
Older adults living in high-deprivation areas walk less than those living in low-deprivation areas. Previous research has shown that older adults’ outdoor walking levels are related to the neighbourhood built environment. This study examines inequalities in perceived built environment attributes (i.e., safety, pedestrian infrastructure and aesthetics) and their possible influences on disparities in older adults’ outdoor walking levels in low- and high-deprivation areas of Birmingham, United Kingdom. It applied a mixed-method approach, included 173 participants (65 years and over), used GPS technology to measure outdoor walking levels, used questionnaires (for all participants) and conducted walking interviews (with a sub-sample) to collect data on perceived neighbourhood built environment attributes. The results show inequalities in perceived neighbourhood safety, pedestrian infrastructure and aesthetics in high- versus low-deprivation areas and demonstrate that they may influence disparities in participants’ outdoor walking levels. Improvements of perceived neighbourhood safety, pedestrian infrastructure and aesthetic in high-deprivation areas are encouraged. PMID:27898023
Ivory, Vivienne C; Blakely, Tony; Pearce, Jamie; Witten, Karen; Bagheri, Nasser; Badland, Hannah; Schofield, Grant
2015-12-01
The importance of neighbourhoods for health and wellbeing may vary according to an individual's reliance on their local resources, but this assertion is rarely tested. We investigate whether greater neighbourhood 'exposure' through reliance on or engagement with the residential setting magnifies neighbourhood-health associations. Three built environment characteristics (destination density, streetscape (attractiveness of built environment) and street connectivity) and two physical activity components (weekday and weekend accelerometer counts) were measured for 2033 residents living in 48 neighbourhoods within four New Zealand cities in 2009-2010, giving six different built environment-physical activity associations. Interactions for each built environment-physical activity association with four individual-level characteristics (acting as proxies for exposure: gender, working status, car access, and income) were assessed with multi-level regression models; a total of 24 'tests'. Of the 12 weekday built environment-physical activity tests, 5 interaction terms were significant (p < 0.05) in the expected direction (e.g. stronger streetscape-physical activity among those with restricted car access). For weekend tests, one association was statistically significant. No significant tests were contradictory. Pooled across the 12 weekday physical activity 'tests', a 1 standard deviation increase in the walkability of the built environment was associated with an overall 3.8% (95% CI: 3.6%-4.1%) greater increase in weekday physical activity across all the types of people we hypothesised to spend more time in their residential neighbourhood, and for weekend physical activity it was 4.2% (95% CI 3.9%-4.5%). Using multiple evaluation methods, interactions were in line with our hypothesis, with a stronger association seen for proxy exposure indicators (for example, restricted car access). Added to the wider evidence base, our study strengthens causal evidence of an effect of the built environment on physical activity, and highlights that health gains from improvements of the residential neighbourhood may be greater for some people. Copyright © 2015 Elsevier Ltd. All rights reserved.
Exploring the Role of the Built and Social Neighborhood Environment in Moderating Stress and Health
Yang, Tse-Chuan
2014-01-01
Background Health researchers have explored how different aspects of neighborhood characteristics contribute to health and well-being, but current understanding of built environment factors is limited. Purpose This study explores whether the association between stress and health varies by residential neighborhood, and if yes, whether built and social neighborhood environment characteristics act as moderators. Methods This study uses multilevel modeling and variables derived from geospatial data to explore the role of neighborhood environment in moderating the association of stress with health. Individual-level data (N=4,093) were drawn from residents of 45 neighborhoods within Philadelphia County, PA, collected as part of the 2006 Philadelphia Health Management Corporation's Household Health Survey. Results We find that the negative influence of high stress varied by neighborhood, that residential stability and affluence (social characteristics) attenuated the association of high stress with health, and that the presence of hazardous waste facilities (built environment characteristics) moderated health by enhancing the association with stress. Conclusions Our findings suggest that neighborhood environment has both direct and moderating associations with health, after adjusting for individual characteristics. The use of geospatial data could broaden the scope of stress–health research and advance knowledge by untangling the intertwined relationship between built and social environments, stress, and health. In particular, future studies should integrate built environment characteristics in health-related research; these characteristics are modifiable and can facilitate health promotion policies. PMID:20300905
Carroll, Suzanne J; Paquet, Catherine; Howard, Natasha J; Coffee, Neil T; Taylor, Anne W; Niyonsenga, Theo; Daniel, Mark
2016-10-01
Descriptive norms vary between places. Spatial variation in health-related descriptive norms may predict individual-level health outcomes. Such relationships have rarely been investigated. This study assessed 10-year change in glycosylated haemoglobin (HbA1c) in relation to local descriptive norms for overweight/obesity (n = 1890) and physical inactivity (n = 1906) in models accounting for features of the built environment. HbA1c was measured three times over 10 years for a population-based biomedical cohort of adults in Adelaide, South Australia. Environmental exposures were expressed for cohort participants using 1600 m road-network buffers centred on participants' residential address. Local descriptive norms (prevalence of overweight/obesity [body mass index ≥25 kg/m(2)] and of physical inactivity [<150 min/week]) were aggregated from responses to a separate geocoded population survey. Built environment measures were public open space (POS) availability (proportion of buffer area) and walkability. Separate sets of multilevel models analysed different predictors of 10-year change in HbA1c. Each model featured one local descriptive norm and one built environment variable with area-level education and individual-level covariates (age, sex, employment status, education, marital status, and smoking status). Interactions between local descriptive norms and built environment measures were assessed. HbA1c increased over time. POS availability and local descriptive norms for overweight/obesity and physical inactivity were each associated with greater rates of HbA1c increase. Greater walkability was associated with a reduced rate of HbA1c increase, and reduced the influence of the overweight/obesity norm on the rate of increase in HbA1c. Local descriptive health-related norms and features of the built environment predict 10-year change in HbA1c. The impact of local descriptive norms can vary according to built environment features. Little researched thus far, local descriptive norms may play an important role in the evolution of HbA1c and thus cardiometabolic risk, over time. Further empirical research on local descriptive norms is necessary to understand how residential environments shape chronic disease risk. Copyright © 2016 Elsevier Ltd. All rights reserved.
Knight, Kelly R; Lopez, Andrea M; Comfort, Megan; Shumway, Martha; Cohen, Jennifer; Riley, Elise D
2014-05-01
Due to the significantly high levels of comorbid substance use and mental health diagnosis among urban poor populations, examining the intersection of drug policy and place requires a consideration of the role of housing in drug user mental health. In San Francisco, geographic boundedness and progressive health and housing polices have coalesced to make single room occupancy hotels (SROs) a key urban built environment used to house poor populations with co-occurring drug use and mental health issues. Unstably housed women who use illicit drugs have high rates of lifetime and current trauma, which manifests in disproportionately high rates of post-traumatic stress disorder (PTSD), anxiety, and depression when compared to stably housed women. We report data from a qualitative interview study (n=30) and four years of ethnography conducted with housing policy makers and unstably housed women who use drugs and live in SROs. Women in the study lived in a range of SRO built environments, from publicly funded, newly built SROs to privately owned, dilapidated buildings, which presented a rich opportunity for ethnographic comparison. Applying Rhodes et al.'s framework of socio-structural vulnerability, we explore how SROs can operate as "mental health risk environments" in which macro-structural factors (housing policies shaping the built environment) interact with meso-level factors (social relations within SROs) and micro-level, behavioral coping strategies to impact women's mental health. The degree to which SRO built environments were "trauma-sensitive" at the macro level significantly influenced women's mental health at meso- and micro-levels. Women who were living in SROs which exacerbated fear and anxiety attempted, with limited success, to deploy strategies on the meso- and micro-level to manage their mental health symptoms. Study findings underscore the importance of housing polices which consider substance use in the context of current and cumulative trauma experiences in order to improve quality of life and mental health for unstably housed women. Copyright © 2013 Elsevier B.V. All rights reserved.
Do Inequalities in Neighborhood Walkability Drive Disparities in Older Adults’ Outdoor Walking?
van Maarseveen, Martin
2017-01-01
Older residents of high-deprivation areas walk less than those of low-deprivation areas. Previous research has shown that neighborhood built environment may support and encourage outdoor walking. The extent to which the built environment supports and encourages walking is called “walkability”. This study examines inequalities in neighborhood walkability in high- versus low-deprivation areas and their possible influences on disparities in older adults’ outdoor walking levels. For this purpose, it focuses on specific neighborhood built environment attributes (residential density, land-use mix and intensity, street connectivity, and retail density) relevant to neighborhood walkability. It applied a mixed-method approach, included 173 participants (≥65 years), and used a Geographic Information System (GIS) and walking interviews (with a sub-sample) to objectively and subjectively measure neighborhood built environment attributes. Outdoor walking levels were measured by using the Geographic Positioning System (GPS) technology. Data on personal characteristics was collected by completing a questionnaire. The results show that inequalities in certain land-use intensity (i.e., green spaces, recreation centers, schools and industries) in high- versus low-deprivation areas may influence disparities in older adults’ outdoor walking levels. Modifying neighborhood land use intensity may help to encourage outdoor walking in high-deprivation areas. PMID:28686219
Smit, Warren; de Lannoy, Ariane; Dover, Robert V H; Lambert, Estelle V; Levitt, Naomi; Watson, Vanessa
2016-05-01
In this paper, we examine how economic, social and political forces impact on NCDs in Khayelitsha (a predominantly low income area in Cape Town, South Africa) through their shaping of the built environment. The paper draws on literature reviews and ethnographic fieldwork undertaken in Khayelitsha. The three main pathways through which the built environment of the area impacts on NCDs are through a complex food environment in which it is difficult to achieve food security, an environment that is not conducive to safe physical activity, and high levels of depression and stress (linked to, amongst other factors, poverty, crime and fear of crime). All of these factors are at least partially linked to the isolated, segregated and monofunctional nature of Khayelitsha. The paper highlights that in order to effectively address urban health challenges, we need to understand how economic, social and political forces impact on NCDs through the way they shape built environments. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.
Salois, Matthew J
2012-01-01
Obesity and diabetes are increasingly attributed to environmental factors, however, little attention has been paid to the influence of the 'local' food economy. This paper examines the association of measures relating to the built environment and 'local' agriculture with U.S. county-level prevalence of obesity and diabetes. Key indicators of the 'local' food economy include the density of farmers' markets and the presence of farms with direct sales. This paper employs a robust regression estimator to account for non-normality of the data and to accommodate outliers. Overall, the built environment is associated with the prevalence of obesity and diabetes and a strong local' food economy may play an important role in prevention. Results imply considerable scope for community-level interventions. Copyright © 2011 Elsevier B.V. All rights reserved.
Identifying the impact of the built environment on flood damage in Texas.
Brody, Samuel D; Zahran, Sammy; Highfield, Wesley E; Grover, Himanshu; Vedlitz, Arnold
2008-03-01
Floods continue to pose the greatest threat to the property and safety of human communities among all natural hazards in the United States. This study examines the relationship between the built environment and flood impacts in Texas, which consistently sustains the most damage from flooding of any other state in the country. Specifically, we calculate property damage resulting from 423 flood events between 1997 and 2001 at the county level. We identify the effect of several built environment measures, including wetland alteration, impervious surface, and dams on reported property damage while controlling for biophysical and socio-economic characteristics. Statistical results suggest that naturally occurring wetlands play a particularly important role in mitigating flood damage. These findings provide guidance to planners and flood managers on how to alleviate most effectively the costly impacts of foods at the community level.
Liu, Qingmin; Ren, Yanjun; Cao, Chengjian; Su, Meng; Lyu, Jun; Li, Liming
2015-10-01
To explore the association between walking time and the perception of built environment among local adults in Hangzhou. Through multistage stratified random sampling, a total of 1 440 urban residents aged 25-59 years were surveyed in Hangzhou by face-to face interview in 2012. The international physical activity questionnaire-long version (IPAQ-L) was used to assess the physical activity levels, including walking time in the past week. Neighborhood Environment Walkability Scale-Abbreviated (NEWS-A) was used to obtain information about their perception of built environment. Multiple logistic regression was applied to estimate the relationship between waking and the perception of built environment. Among the local adults in Hangzhou, the median of total physical activity was 2 766 met·min⁻¹·week⁻¹, the average walking time per week was 90 min for leisure and 100 min for transportation respectively. After controlling the age, marital status, BMI, educational level, employment, community type and the total PA scores, the leisure-time walking was negatively related to the accessibility to stores, facilities and other things for both man (OR=0.764, 95% CI: 0.588-0.992) and woman (OR=0.633, 95% CI: 0.481-0.833). In sex specific analysis, the leisure-time walking was negatively related with the residential density (OR=0.997, 95% CI: 0.996-0.999) while transportation related walking was positively related with walking/cycling way scores (OR=1.537, 95% CI: 1.138-2.075) in females. In contrast, there were no significant associations between perception of built environment and transportation related walking in males. Improving the built environment, such as the walking/cycling way, might be useful to increase the transportation related walking time for adults. The sex specific differences need to be considered in the environment intervention for walking promotion.
[RSF model optimization and its application to brain tumor segmentation in MRI].
Cheng, Zhaoning; Song, Zhijian
2013-04-01
Magnetic resonance imaging (MRI) is usually obscure and non-uniform in gray, and the tumors inside are poorly circumscribed, hence the automatic tumor segmentation in MRI is very difficult. Region-scalable fitting (RSF) energy model is a new segmentation approach for some uneven grayscale images. However, the level set formulation (LSF) of RSF model is not suitable for the environment with different grey level distribution inside and outside the intial contour, and the complex intensity environment of MRI always makes it hard to get ideal segmentation results. Therefore, we improved the model by a new LSF and combined it with the mean shift method, which can be helpful for tumor segmentation and has better convergence and target direction. The proposed method has been utilized in a series of studies for real MRI images, and the results showed that it could realize fast, accurate and robust segmentations for brain tumors in MRI, which has great clinical significance.
Knight, Knight R.; Lopez, Andrea M.; Comfort, Megan; Shumway, Martha; Cohen, Jennifer; Riley, Elise
2014-01-01
Due to the significantly high levels of comorbid substance use and mental health diagnosis among urban poor populations, examining the intersection of drug policy and place requires a consideration of the role of housing in drug user mental health. In San Francisco, geographic boundedness and progressive health and housing polices have coalesced to make single room occupancy hotels (SROs) a key urban built environment used to house poor populations with co-occurring drug use and mental health issues. Unstably housed women who use illicit drugs have high rates of lifetime and current trauma, which manifests in disproportionately high rates of post-traumatic stress disorder (PTSD), anxiety, and depression when compared to stably housed women. We report data from a qualitative interview study (n=30) and four years of ethnography conducted with housing policy makers and unstably housed women who use drugs and live in SROs. Women in the study lived in a range of SRO built environments, from publicly-funded, newly built SROs to privately-owned, dilapidated buildings, which presented a rich opportunity for ethnographic comparison. Applying Rhodes et al.’s framework of socio-structural vulnerability, we explore how SROs can operate as “mental health risk environments” in which macro-structural factors (housing policies shaping the built environment) interact with meso-level factors (social relations within SROs) and micro-level, behavioral coping strategies to impact women’s mental health. The degree to which SRO built environments were “trauma-sensitive” at the macro level significantly influenced women’s mental health at meso- and micro- levels. Women who were living in SROs which exacerbated fear and anxiety attempted, with limited success, to deploy strategies on the meso- and micro- level to manage their mental health symptoms. Study findings underscore the importance of housing polices which consider substance use in the context of current and cumulative trauma experiences in order to improve quality of life and mental health for unstably housed women. PMID:24411945
Nandi, Arijit; Galea, Sandro; Ahern, Jennifer; Bucciarelli, Angela; Vlahov, David; Tardiff, Kenneth
2006-08-01
Accidental drug overdose is a substantial cause of mortality for drug users. Using a multilevel case-control study we previously have shown that neighborhood-level income inequality may be an important determinant of overdose death independent of individual-level factors. Here we hypothesized that the level of environmental disorder, the level of police activity, and the quality of the built environment in a neighborhood mediate this association. Data from the New York City (NYC) Mayor's Management Report, the NYC Police Department, and the NYC Housing and Vacancy Survey were used to define constructs for the level of environmental disorder, the level of police activity and the quality of the built environment, respectively. In multivariable models the odds of death due to drug overdose in neighborhoods in the top decile of income inequality compared to the most equitable neighborhoods decreased from 1.63 to 1.12 when adjusting for the three potential mediators. Path analyses show that the association between income inequality and the rate of drug overdose mortality was primarily explained by an indirect effect through the level of environmental disorder and the quality of the built environment in a neighborhood. Implications of these findings for the reduction of drug overdose mortality associated with the distribution of income are discussed.
Perceptions of social capital and the built environment and mental health.
Araya, Ricardo; Dunstan, Frank; Playle, Rebecca; Thomas, Hollie; Palmer, Stephen; Lewis, Glyn
2006-06-01
There has been much speculation about a possible association between the social and built environment and health, but the empirical evidence is still elusive. The social and built environments are best seen as contextual concepts but they are usually estimated as an aggregation of individual compositional measures, such as perceptions on trust or the desirability to live in an area. If these aggregated compositional measures were valid measures, one would expect that they would evince correlations at higher levels of data collection (e.g., neighbourhood). The aims of this paper are: (1) to investigate the factor structure of a self-administered questionnaire measuring individual perceptions of trust, social participation, social cohesion, social control, and the built environment; (2) to investigate variation in these factors at higher than the individual level (households and postcodes) in order to assess if these constructs reflect some contextual effect; and (3) to study the association between mental health, as measured by the General Health Questionnaire-12 (GHQ-12), and these derived factors. A cross-sectional household survey was undertaken during May-August 2001 in a district of South Wales with a population of 140,000. We found that factor analysis grouped our questions in factors similar to the theoretical ones we had previously envisaged. We also found that approximately one-third of the variance for neighbourhood quality and 10% for social control was explained at postcode (neighbourhood) level after adjusting for individual variables, thus suggesting that some of our compositional measures capture contextual characteristics of the built and social environment. After adjusting for individual variables, trust and social cohesion, two key social capital components were the only factors to show statistically significant associations with GHQ-12 scores. However, these factors also showed little variation at postcode levels, suggesting a stronger individual determination. We conclude that our results provide some evidence in support of an association between mental health (GHQ-12 scores) and perceptions of social capital, but less support for the contextual nature of social capital.
Mason, Craig A.; Lombard, Joanna L.; Martinez, Frank; Plater-Zyberk, Elizabeth; Spokane, Arnold R.; Newman, Frederick L.; Pantin, Hilda; Szapocznik, José
2009-01-01
Background Research on contextual and neighborhood effects increasingly includes the built (physical) environment's influences on health and social well-being. A population-based study examined whether architectural features of the built environment theorized to promote observations and social interactions (e.g., porches, windows) predict Hispanic elders’ psychological distress. Methods Coding of built environment features of all 3,857 lots across 403 blocks in East Little Havana, Florida, and enumeration of elders in 16,000 households was followed by assessments of perceived social support and psychological distress in a representative sample of 273 low socioeconomic status (SES) Hispanic elders. Structural-equation modeling was used to assess relationships between block-level built environment features, elders’ perceived social support, and psychological distress. Results Architectural features of the front entrance such as porches that promote visibility from a building's exterior were positively associated with perceived social support. In contrast, architectural features such as window areas that promote visibility from a building's interior were negatively associated with perceived social support. Perceived social support in turn was associated with reduced psychological distress after controlling for demographics. Additionally, perceived social support mediated the relationship of built environment variables to psychological distress. Conclusions Architectural features that facilitate direct, in-person interactions may be beneficial for Hispanic elders’ mental health. PMID:19196696
Environmental Pollution Control: Two Views from the General Population
ERIC Educational Resources Information Center
Althoff, Phillip; Greig, William H.
1977-01-01
Citizens exhibitied concern about pollution, a low level of trust in governmental and industrial efforts, and a low level of dedication to environmental protection. Demands to clean up the environment came from one segment of the population while demands to solve the energy crisis came from other segments. (AJ)
The neighborhood environment and obesity: Understanding variation by race/ethnicity.
Wong, Michelle S; Chan, Kitty S; Jones-Smith, Jessica C; Colantuoni, Elizabeth; Thorpe, Roland J; Bleich, Sara N
2018-06-01
Neighborhood characteristics have been associated with obesity, but less is known whether relationships vary by race/ethnicity. This study examined the relationship between soda consumption - a behavior strongly associated with obesity - and weight status with neighborhood sociodemographic, social, and built environments by race/ethnicity. We merged data on adults from the 2011-2013 California Health Interview Survey, U.S. Census data, and InfoUSA (n=62,396). Dependent variables were soda consumption and weight status outcomes (body mass index and obesity status). Main independent variables were measures of three neighborhood environments: social (social cohesion and safety), sociodemographic (neighborhood socioeconomic status, educational attainment, percent Asian, percent Hispanic, and percent black), and built environments (number of grocery stores, convenience stores, fast food restaurants, and gyms in neighborhood). We fit multi-level linear and logistic regression models, stratified by individual race/ethnicity (NH (non-Hispanic) Whites, NH African Americans, Hispanics, and NH Asians) controlling for individual-level characteristics, to estimate neighborhood contextual effects on study outcomes. Lower neighborhood educational attainment was associated with higher odds of obesity and soda consumption in all racial/ethnic groups. We found fewer associations between study outcomes and the neighborhood, especially the built environment, among NH African Americans and NH Asians. While improvements to neighborhood environment may be promising to reduce obesity, null associations among minority subgroups suggest that changes, particularly to the built environment, may alone be insufficient to address obesity in these groups. Published by Elsevier Inc.
Walkability for Different Urban Granularities
NASA Astrophysics Data System (ADS)
Hollenstein, D.; Bleisch, S.
2016-06-01
The positive effects of low-intensity physical activity are widely acknowledged and in this context walking is often promoted as an active form of transport. Under the concept of walkability the role of the built environment in encouraging walking is investigated. For that purpose, walkability is quantified area-wise by measuring a varying set of built environment attributes. In purely GIS-based approaches to studying walkability, indices are generally built using existing and easily accessible data. These include street network design, population density, land use mix, and access to destinations. Access to destinations is usually estimated using either a fixed radius, or distances in the street network. In this paper, two approaches to approximate a footpath network are presented. The two footpath networks were built making different assumptions regarding the walkability of different street types with respect to more or less restrictive safety preferences. Information on sidewalk presence, pedestrian crossings, and traffic restrictions were used to build both networks. The first network comprises car traffic free areas only. The second network includes streets with low speed limits that have no sidewalks. Both networks are compared to the more commonly used street network in an access-to-distance analysis. The results suggest that for the generally highly walkable study area, access to destination mostly depends on destination density within the defined walkable distance. However, on single street segments access to destinations is diminished when only car traffic free spaces are assumed to be walkable.
Glisson, Courtenay L; Altamar, Hernan O; Herrell, S Duke; Clark, Peter; Galloway, Robert L
2011-11-01
Image segmentation is integral to implementing intraoperative guidance for kidney tumor resection. Results seen in computed tomography (CT) data are affected by target organ physiology as well as by the segmentation algorithm used. This work studies variables involved in using level set methods found in the Insight Toolkit to segment kidneys from CT scans and applies the results to an image guidance setting. A composite algorithm drawing on the strengths of multiple level set approaches was built using the Insight Toolkit. This algorithm requires image contrast state and seed points to be identified as input, and functions independently thereafter, selecting and altering method and variable choice as needed. Semi-automatic results were compared to expert hand segmentation results directly and by the use of the resultant surfaces for registration of intraoperative data. Direct comparison using the Dice metric showed average agreement of 0.93 between semi-automatic and hand segmentation results. Use of the segmented surfaces in closest point registration of intraoperative laser range scan data yielded average closest point distances of approximately 1 mm. Application of both inverse registration transforms from the previous step to all hand segmented image space points revealed that the distance variability introduced by registering to the semi-automatically segmented surface versus the hand segmented surface was typically less than 3 mm both near the tumor target and at distal points, including subsurface points. Use of the algorithm shortened user interaction time and provided results which were comparable to the gold standard of hand segmentation. Further, the use of the algorithm's resultant surfaces in image registration provided comparable transformations to surfaces produced by hand segmentation. These data support the applicability and utility of such an algorithm as part of an image guidance workflow.
A new medical image segmentation model based on fractional order differentiation and level set
NASA Astrophysics Data System (ADS)
Chen, Bo; Huang, Shan; Xie, Feifei; Li, Lihong; Chen, Wensheng; Liang, Zhengrong
2018-03-01
Segmenting medical images is still a challenging task for both traditional local and global methods because the image intensity inhomogeneous. In this paper, two contributions are made: (i) on the one hand, a new hybrid model is proposed for medical image segmentation, which is built based on fractional order differentiation, level set description and curve evolution; and (ii) on the other hand, three popular definitions of Fourier-domain, Grünwald-Letnikov (G-L) and Riemann-Liouville (R-L) fractional order differentiation are investigated and compared through experimental results. Because of the merits of enhancing high frequency features of images and preserving low frequency features of images in a nonlinear manner by the fractional order differentiation definitions, one fractional order differentiation definition is used in our hybrid model to perform segmentation of inhomogeneous images. The proposed hybrid model also integrates fractional order differentiation, fractional order gradient magnitude and difference image information. The widely-used dice similarity coefficient metric is employed to evaluate quantitatively the segmentation results. Firstly, experimental results demonstrated that a slight difference exists among the three expressions of Fourier-domain, G-L, RL fractional order differentiation. This outcome supports our selection of one of the three definitions in our hybrid model. Secondly, further experiments were performed for comparison between our hybrid segmentation model and other existing segmentation models. A noticeable gain was seen by our hybrid model in segmenting intensity inhomogeneous images.
Al-Shaikhli, Saif Dawood Salman; Yang, Michael Ying; Rosenhahn, Bodo
2016-12-01
This paper presents a novel method for Alzheimer's disease classification via an automatic 3D caudate nucleus segmentation. The proposed method consists of segmentation and classification steps. In the segmentation step, we propose a novel level set cost function. The proposed cost function is constrained by a sparse representation of local image features using a dictionary learning method. We present coupled dictionaries: a feature dictionary of a grayscale brain image and a label dictionary of a caudate nucleus label image. Using online dictionary learning, the coupled dictionaries are learned from the training data. The learned coupled dictionaries are embedded into a level set function. In the classification step, a region-based feature dictionary is built. The region-based feature dictionary is learned from shape features of the caudate nucleus in the training data. The classification is based on the measure of the similarity between the sparse representation of region-based shape features of the segmented caudate in the test image and the region-based feature dictionary. The experimental results demonstrate the superiority of our method over the state-of-the-art methods by achieving a high segmentation (91.5%) and classification (92.5%) accuracy. In this paper, we find that the study of the caudate nucleus atrophy gives an advantage over the study of whole brain structure atrophy to detect Alzheimer's disease. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Learning across Languages: Bilingual Experience Supports Dual Language Statistical Word Segmentation
ERIC Educational Resources Information Center
Antovich, Dylan M.; Graf Estes, Katharine
2018-01-01
Bilingual acquisition presents learning challenges beyond those found in monolingual environments, including the need to segment speech in two languages. Infants may use statistical cues, such as syllable-level transitional probabilities, to segment words from fluent speech. In the present study we assessed monolingual and bilingual 14-month-olds'…
Wang, Xiaobo; Conway, Terry L; Cain, Kelli L; Frank, Lawrence D; Saelens, Brian E; Geremia, Carrie; Kerr, Jacqueline; Glanz, Karen; Carlson, Jordan A; Sallis, James F
2017-07-01
The present study examined independent and interacting associations of psychosocial and neighborhood built environment variables with adolescents' reported active transportation. Moderating effects of adolescent sex were explored. Mixed-effects regression models were conducted on data from the Teen Environment and Neighborhood observational study (N=928) in the Seattle, WA and Baltimore regions 2009-2011. Frequency index of active transportation to neighborhood destinations (dependent variable) and 7 psychosocial measures were reported by adolescents. Built environment measures included home walkability and count of nearby parks and recreation facilities using GIS procedures and streetscape quality from environmental audits. Results indicated all 3 environmental variables and 3 psychosocial variables (self-efficacy, social support from peers, and enjoyment of physical activity) had significant positive main effects with active transportation (Ps<0.05). Three of 21 two-way interactions were significant in explaining active transportation (Ps<0.1): self-efficacy×GIS-based walkability index, barriers to activity in neighborhood×MAPS streetscape scores, and self-efficacy×GIS-based counts of parks and recreation facilities. In each two-way interaction the highest active transportation was found among adolescents with the combination of activity-supportive built environment and positive psychosocial characteristics. Three-way interactions with sex indicated similar associations for girls and boys, with one exception. Results provided modest support for the ecological model principle of interactions across levels, highlight the importance of both built environment and psychosocial factors in shaping adolescents' active transportation, demonstrated the possibility of sex-specific findings, and suggested strategies for improving adolescents' active transportation may be most effective when targeting multiple levels of influence. Copyright © 2017 Elsevier Inc. All rights reserved.
Built environment and physical activity for transportation in adults from Curitiba, Brazil.
Hino, Adriano A F; Reis, Rodrigo S; Sarmiento, Olga L; Parra, Diana C; Brownson, Ross C
2014-06-01
The goal of this study was to assess the association between features of the built environment and levels of walking and cycling as forms of transportation in the city of Curitiba, Brazil. Data collection was conducted through a telephone survey in 2008. The International Physical Activity Questionnaire was used to identify walking or cycling as forms of transportation. The built environment characteristics were obtained through the Geographic Information System for 1,206 adults. Density indicators were computed, considering a radius of 500 m around each individual's household. For the accessibility measures, the shortest distance to selected built environment features (e.g., bus stop, bike path) was used. The association between characteristics of the environment and the practice of walking or cycling was assessed through logistic regressions. After considering individual characteristics, higher-income areas (OR = 0.56, 95 % CI = 0.41-0.76), higher density of Bus Rapid Transit stations (OR = 1.50, 95 % CI = 1.22-1.84), and the proportion of residential (OR = 1.25, 95 % CI = 1.02-1.53) and commercial (OR = 1.47, 95 % CI = 1.13-1.91) areas were associated with any walking prevalence (≥ 10 min/week). Higher access to bike paths (OR = 0.80, 95 % CI = 0.64-1.00) was inversely associated with walking at recommended levels (≥ 150 min/week). Higher-income areas (OR = 0.26, 95 % CI = 0.08-0.81), greater number of traffic lights (OR = 0.27, 95 % CI = 0.09-0.88), and higher land use mix (OR = 0.52, 95 % CI = 0.31-0.88) were inversely associated with cycling. The neighborhood built environment may affect active commuting among adults living in urban centers in middle-income countries.
Pomerleau, J; Knai, C; Foster, C; Rutter, H; Darmon, N; Derflerova Brazdova, Z; Hadziomeragic, A F; Pekcan, G; Pudule, I; Robertson, A; Brunner, E; Suhrcke, M; Gabrijelcic Blenkus, M; Lhotska, L; Maiani, G; Mistura, L; Lobstein, T; Martin, B W; Elinder, L S; Logstrup, S; Racioppi, F; McKee, M
2013-03-01
The authors designed an instrument to measure objectively aspects of the built and food environments in urban areas, the EURO-PREVOB Community Questionnaire, within the EU-funded project 'Tackling the social and economic determinants of nutrition and physical activity for the prevention of obesity across Europe' (EURO-PREVOB). This paper describes its development, reliability, validity, feasibility and relevance to public health and obesity research. The Community Questionnaire is designed to measure key aspects of the food and built environments in urban areas of varying levels of affluence or deprivation, within different countries. The questionnaire assesses (1) the food environment and (2) the built environment. Pilot tests of the EURO-PREVOB Community Questionnaire were conducted in five to 10 purposively sampled urban areas of different socio-economic status in each of Ankara, Brno, Marseille, Riga, and Sarajevo. Inter-rater reliability was compared between two pairs of fieldworkers in each city centre using three methods: inter-observer agreement (IOA), kappa statistics, and intraclass correlation coefficients (ICCs). Data were collected successfully in all five cities. Overall reliability of the EURO-PREVOB Community Questionnaire was excellent (inter-observer agreement (IOA) > 0.87; intraclass correlation coefficients (ICC)s > 0.91 and kappa statistics > 0.7. However, assessment of certain aspects of the quality of the built environment yielded slightly lower IOA coefficients than the quantitative aspects. The EURO-PREVOB Community Questionnaire was found to be a reliable and practical observational tool for measuring differences in community-level data on environmental factors that can impact on dietary intake and physical activity. The next step is to evaluate its predictive power by collecting behavioural and anthropometric data relevant to obesity and its determinants. Copyright © 2013 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.
Model-based video segmentation for vision-augmented interactive games
NASA Astrophysics Data System (ADS)
Liu, Lurng-Kuo
2000-04-01
This paper presents an architecture and algorithms for model based video object segmentation and its applications to vision augmented interactive game. We are especially interested in real time low cost vision based applications that can be implemented in software in a PC. We use different models for background and a player object. The object segmentation algorithm is performed in two different levels: pixel level and object level. At pixel level, the segmentation algorithm is formulated as a maximizing a posteriori probability (MAP) problem. The statistical likelihood of each pixel is calculated and used in the MAP problem. Object level segmentation is used to improve segmentation quality by utilizing the information about the spatial and temporal extent of the object. The concept of an active region, which is defined based on motion histogram and trajectory prediction, is introduced to indicate the possibility of a video object region for both background and foreground modeling. It also reduces the overall computation complexity. In contrast with other applications, the proposed video object segmentation system is able to create background and foreground models on the fly even without introductory background frames. Furthermore, we apply different rate of self-tuning on the scene model so that the system can adapt to the environment when there is a scene change. We applied the proposed video object segmentation algorithms to several prototype virtual interactive games. In our prototype vision augmented interactive games, a player can immerse himself/herself inside a game and can virtually interact with other animated characters in a real time manner without being constrained by helmets, gloves, special sensing devices, or background environment. The potential applications of the proposed algorithms including human computer gesture interface and object based video coding such as MPEG-4 video coding.
The microbiome of the built environment and mental health.
Hoisington, Andrew J; Brenner, Lisa A; Kinney, Kerry A; Postolache, Teodor T; Lowry, Christopher A
2015-12-17
The microbiome of the built environment (MoBE) is a relatively new area of study. While some knowledge has been gained regarding impacts of the MoBE on the human microbiome and disease vulnerability, there is little knowledge of the impacts of the MoBE on mental health. Depending on the specific microbial species involved, the transfer of microorganisms from the built environment to occupant's cutaneous or mucosal membranes has the potential to increase or disrupt immunoregulation and/or exaggerate or suppress inflammation. Preclinical evidence highlighting the influence of the microbiota on systemic inflammation supports the assertion that microorganisms, including those originating from the built environment, have the potential to either increase or decrease the risk of inflammation-induced psychiatric conditions and their symptom severity. With advanced understanding of both the ecology of the built environment, and its influence on the human microbiome, it may be possible to develop bioinformed strategies for management of the built environment to promote mental health. Here we present a brief summary of microbiome research in both areas and highlight two interdependencies including the following: (1) effects of the MoBE on the human microbiome and (2) potential opportunities for manipulation of the MoBE in order to improve mental health. In addition, we propose future research directions including strategies for assessment of changes in the microbiome of common areas of built environments shared by multiple human occupants, and associated cohort-level changes in the mental health of those who spend time in the buildings. Overall, our understanding of the fields of both the MoBE and influence of host-associated microorganisms on mental health are advancing at a rapid pace and, if linked, could offer considerable benefit to health and wellness.
Gomez, Scarlett Lin; Shariff-Marco, Salma; De Rouen, Mindy; Keegan, Theresa H. M.; Yen, Irene H.; Mujahid, Mahasin; Satariano, William A.; Glaser, Sally L.
2015-01-01
Neighborhood social and built environments have been recognized as important contexts in which health is shaped. We review the extent to which these neighborhood factors have been addressed in population-level cancer research, with a scan of the literature for research that focuses on specific social and/or built environment characteristics and association with outcomes across the cancer continuum, including incidence, diagnosis, treatment, survivorship, and survival. We discuss commonalities and differences in methodologies across studies, current challenges in research methodology, and future directions in this research area. The assessment of social and built environment factors in relation to cancer is a relatively new field, with 82% of 34 reviewed papers published since 2010. Across the wide range of social and built environment exposures and cancer outcomes considered by the studies, numerous associations were reported. However, the directions and magnitudes of association varied, due in large part to the variation in cancer sites and outcomes being studied, but also likely due to differences in study populations, geographical region, and, importantly, choice of neighborhood measure and geographic scale. We recommend that future studies consider the life course implications of cancer incidence and survival, integrate secondary and self-report data, consider work neighborhood environments, and further develop analytical and statistical approaches appropriate to the geospatial and multilevel nature of the data. Incorporating social and built environment factors into research on cancer etiology and outcomes can provide insights into disease processes, identify vulnerable populations, and generate results with translational impact of relevance for interventionists and policy makers. PMID:25847484
Environmental exposures are often measured individually, though many occur in tandem. To address aggregate exposures, a county-level Environmental Quality Index (EQI) representing five environmental domains (air, water, land, built and sociodemographic) was constructed. Recent st...
A high-level 3D visualization API for Java and ImageJ.
Schmid, Benjamin; Schindelin, Johannes; Cardona, Albert; Longair, Mark; Heisenberg, Martin
2010-05-21
Current imaging methods such as Magnetic Resonance Imaging (MRI), Confocal microscopy, Electron Microscopy (EM) or Selective Plane Illumination Microscopy (SPIM) yield three-dimensional (3D) data sets in need of appropriate computational methods for their analysis. The reconstruction, segmentation and registration are best approached from the 3D representation of the data set. Here we present a platform-independent framework based on Java and Java 3D for accelerated rendering of biological images. Our framework is seamlessly integrated into ImageJ, a free image processing package with a vast collection of community-developed biological image analysis tools. Our framework enriches the ImageJ software libraries with methods that greatly reduce the complexity of developing image analysis tools in an interactive 3D visualization environment. In particular, we provide high-level access to volume rendering, volume editing, surface extraction, and image annotation. The ability to rely on a library that removes the low-level details enables concentrating software development efforts on the algorithm implementation parts. Our framework enables biomedical image software development to be built with 3D visualization capabilities with very little effort. We offer the source code and convenient binary packages along with extensive documentation at http://3dviewer.neurofly.de.
Benton, Jack S; Anderson, Jamie; Hunter, Ruth F; French, David P
2016-10-07
Evidence regarding the association of the built environment with physical activity is influencing policy recommendations that advocate changing the built environment to increase population-level physical activity. However, to date there has been no rigorous appraisal of the quality of the evidence on the effects of changing the built environment. The aim of this review was to conduct a thorough quantitative appraisal of the risk of bias present in those natural experiments with the strongest experimental designs for assessing the causal effects of the built environment on physical activity. Eligible studies had to evaluate the effects of changing the built environment on physical activity, include at least one measurement before and one measurement of physical activity after changes in the environment, and have at least one intervention site and non-intervention comparison site. Given the large number of systematic reviews in this area, studies were identified from three exemplar systematic reviews; these were published in the past five years and were selected to provide a range of different built environment interventions. The risk of bias in these studies was analysed using the Cochrane Risk of Bias Assessment Tool: for Non-Randomized Studies of Interventions (ACROBAT-NRSI). Twelve eligible natural experiments were identified. Risk of bias assessments were conducted for each physical activity outcome from all studies, resulting in a total of fifteen outcomes being analysed. Intervention sites included parks, urban greenways/trails, bicycle lanes, paths, vacant lots, and a senior citizen's centre. All outcomes had an overall critical (n = 12) or serious (n = 3) risk of bias. Domains with the highest risk of bias were confounding (due to inadequate control sites and poor control of confounding variables), measurement of outcomes, and selection of the reported result. The present review focused on the strongest natural experiments conducted to date. Given this, the failure of existing studies to adequately control for potential sources of bias highlights the need for more rigorous research to underpin policy recommendations for changing the built environment to increase physical activity. Suggestions are proposed for how future natural experiments in this area can be improved.
256. Linn Cove Viaduct. This is the first precast concrete ...
256. Linn Cove Viaduct. This is the first precast concrete segmental concrete segmental viaduct to be built with the progressive method in the United States. It contains nearly every type of highway construction within its length. With is super elevation of up to ten degrees and its tight horizontal and spiral curves, it was the most complicated bridge of its type built to that time. Looking south-southwest. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
Nguyen, Quynh C; Sajjadi, Mehdi; McCullough, Matt; Pham, Minh; Nguyen, Thu T; Yu, Weijun; Meng, Hsien-Wen; Wen, Ming; Li, Feifei; Smith, Ken R; Brunisholz, Kim; Tasdizen, Tolga
2018-03-01
Neighbourhood quality has been connected with an array of health issues, but neighbourhood research has been limited by the lack of methods to characterise large geographical areas. This study uses innovative computer vision methods and a new big data source of street view images to automatically characterise neighbourhood built environments. A total of 430 000 images were obtained using Google's Street View Image API for Salt Lake City, Chicago and Charleston. Convolutional neural networks were used to create indicators of street greenness, crosswalks and building type. We implemented log Poisson regression models to estimate associations between built environment features and individual prevalence of obesity and diabetes in Salt Lake City, controlling for individual-level and zip code-level predisposing characteristics. Computer vision models had an accuracy of 86%-93% compared with manual annotations. Charleston had the highest percentage of green streets (79%), while Chicago had the highest percentage of crosswalks (23%) and commercial buildings/apartments (59%). Built environment characteristics were categorised into tertiles, with the highest tertile serving as the referent group. Individuals living in zip codes with the most green streets, crosswalks and commercial buildings/apartments had relative obesity prevalences that were 25%-28% lower and relative diabetes prevalences that were 12%-18% lower than individuals living in zip codes with the least abundance of these neighbourhood features. Neighbourhood conditions may influence chronic disease outcomes. Google Street View images represent an underused data resource for the construction of built environment features. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Schulz, Amy; Mentz, Graciela; Johnson-Lawrence, Vicki; Israel, Barbara A; Max, Paul; Zenk, Shannon N; Wineman, Jean; Marans, Robert W
2013-10-01
Physical activity is associated with reduced risk of a number of health outcomes, yet fewer than half of adults in the United States report recommended levels of physical activity. Analyses of structural characteristics of the built environment as correlates of physical activity have yielded mixed results. We examine associations between multiple aspects of urban neighborhood environments and physical activity in order to understand their independent and joint effects, with a focus on the extent to which the condition of the built environment and indicators of the social environment modify associations between structural characteristics and physical activity. We use data from a stratified, multi-stage proportional probability sample of 919 non-Hispanic Black, non-Hispanic White, and Hispanic adults in an urban community, observational data from their residential neighborhoods, and census data to examine independent and joint associations of structural characteristics (e.g., street network connectivity), their condition (e.g., sidewalk condition), and social environments (e.g., territoriality) with physical activity. Our findings suggest that sidewalk condition is associated with physical activity, above and beyond structural characteristics of the built environment. Associations between some structural characteristics of the built environment and physical activity were conditional upon street condition, physical deterioration, and the proportion of parks and playgrounds in good condition. We found modest support for the hypothesis that associations between structural characteristics and physical activity are modified by aspects of the social environment. Results presented here point to the value of and need for understanding and addressing the complexity of factors that contribute to the relationships between the built and social environments and physical activity, and in turn, obesity and co-morbidities. Bringing together urban planners, public health practitioners and policy makers to understand and address aspects of urban environment associated with health outcomes is critical to promoting health and health equity.
Kolbe-Alexander, Tracy L; Pacheco, Kyla; Tomaz, Simone A; Karpul, David; Lambert, Estelle V
2015-05-30
Previous research has shown that the built environment plays a role in habitual levels of physical activity (PA), however much of this research has been conducted in adults and higher income countries. The aim of this pilot study was to examine the strength of association between the built environment and PA in South African older adults. Participants were recruited (n = 44, mean age 65 ± 8.5 years) from two suburbs, representing either a high socioeconomic (HSA) or low socioeconomic area (LSA). Self-reported PA, and subjective assessments of neighborhood walkability (Neighborhood Environment Walkability Scale, NEWS) was measured. Participants wore Actigraph GT3x accelerometers to objectively quantify PA. HSA participants reported significantly more leisure-time and less transport PA. Objectively measured and self-reported MVPA was significantly higher in HSA participants. NEWS 'Land-use Mix' was negatively associated with leisure-time MVPA, (r(2) = 0.20; p < 0.02). In addition, neighborhood aesthetics was positively associated with leisure-time physical activity (r(2) = 0.33; p = 0.02). 'Safety from traffic' was inversely associated with travel-related PA (r(2) = 0.14, p = 0.01). None of the other NEWS scores were associated with PA for the total group. Leisure-time and transport-related PA was influenced by socio-economic status. Attributes of the perceived built environment associated with leisure-time and total MVPA in older South Africa adults were different in low- and high- income settings.
The Built Environment and Health: Introducing Individual Space-Time Behavior
Saarloos, Dick; Kim, Jae-Eun; Timmermans, Harry
2009-01-01
Many studies have examined the relationship between the built environment and health. Yet, the question of how and why the environment influences health behavior remains largely unexplored. As health promotion interventions work through the individuals in a targeted population, an explicit understanding of individual behavior is required to formulate and evaluate intervention strategies. Bringing in concepts from various fields, this paper proposes the use of an activity-based modeling approach for understanding and predicting, from the bottom up, how individuals interact with their environment and each other in space and time, and how their behaviors aggregate to population-level health outcomes. PMID:19578457
Gomez, Scarlett Lin; Shariff-Marco, Salma; DeRouen, Mindy; Keegan, Theresa H M; Yen, Irene H; Mujahid, Mahasin; Satariano, William A; Glaser, Sally L
2015-07-15
Neighborhood social and built environments have been recognized as important contexts in which health is shaped. The authors reviewed the extent to which these neighborhood factors have been addressed in population-level cancer research by scanning the literature for research focused on specific social and/or built environment characteristics and their association with outcomes across the cancer continuum, including incidence, diagnosis, treatment, survivorship, and survival. The commonalities and differences in methodologies across studies, the current challenges in research methodology, and future directions in this research also were addressed. The assessment of social and built environment factors in relation to cancer is a relatively new field, with 82% of the 34 reviewed articles published since 2010. Across the wide range of social and built environment exposures and cancer outcomes considered by the studies, numerous associations were reported. However, the directions and magnitudes of associations varied, in large part because of the variation in cancer sites and outcomes studied, but also likely because of differences in study populations, geographic regions, and, importantly, choice of neighborhood measures and geographic scales. The authors recommend that future studies consider the life-course implications of cancer incidence and survival, integrate secondary and self-report data, consider work neighborhood environments, and further develop analytical and statistical approaches appropriate to the geospatial and multilevel nature of the data. Incorporating social and built environment factors into research on cancer etiology and outcomes can provide insights into disease processes, identify vulnerable populations, and generate results with translational impact of relevance for interventionists and policy makers. © 2015 American Cancer Society.
Clarke, Philippa; Ailshire, Jennifer A; Lantz, Paula
2009-09-01
As people age, they become more dependent on their local communities, especially when they are no longer able to drive. Uneven or discontinuous sidewalks, heavy traffic, and inaccessible public transportation, are just some of the built environment characteristics that can create barriers for outdoor mobility in later adulthood. A small body of literature has been investigating the role of the built environment on disability, but has been limited to cross-sectional analyses. The purpose of this paper is to further advance this area of research by examining the role of the built environment on long-term trajectories of mobility disability in a national sample of American adults (age 45+) followed over a 15-year period. Using multilevel logistic growth curve models with nationally representative data from the Americans' Changing Lives Study (1986-2001), we find that trajectories of mobility disability are steeper in older age groups. Women and those with lower education had a higher odds of mobility disability over time. The presence of just one chronic health condition doubled the odds of mobility disability at each of the four study waves. Among older adults (age 75+), living in neighborhoods characterized by more motorized travel was associated with an odds ratio for mobility disability that was 1.5 times higher in any given year than for older adults living in environments that were more pedestrian friendly. These results suggest that the built environment can exacerbate mobility difficulties for older adults. When considering ways to minimize disability as the population ages, simple changes in the built environment may be easier to implement than efforts to change risk factors at the individual level.
Gopakumar, Gopalakrishna Pillai; Swetha, Murali; Sai Siva, Gorthi; Sai Subrahmanyam, Gorthi R K
2018-03-01
The present paper introduces a focus stacking-based approach for automated quantitative detection of Plasmodium falciparum malaria from blood smear. For the detection, a custom designed convolutional neural network (CNN) operating on focus stack of images is used. The cell counting problem is addressed as the segmentation problem and we propose a 2-level segmentation strategy. Use of CNN operating on focus stack for the detection of malaria is first of its kind, and it not only improved the detection accuracy (both in terms of sensitivity [97.06%] and specificity [98.50%]) but also favored the processing on cell patches and avoided the need for hand-engineered features. The slide images are acquired with a custom-built portable slide scanner made from low-cost, off-the-shelf components and is suitable for point-of-care diagnostics. The proposed approach of employing sophisticated algorithmic processing together with inexpensive instrumentation can potentially benefit clinicians to enable malaria diagnosis. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Fazli, Ghazal S; Creatore, Maria I; Matheson, Flora I; Guilcher, Sara; Kaufman-Shriqui, Vered; Manson, Heather; Johns, Ashley; Booth, Gillian L
2017-01-03
In recent years, obesity-related diseases have been on the rise globally resulting in major challenges for health systems and society as a whole. Emerging research in population health suggests that interventions targeting the built environment may help reduce the burden of obesity and type 2 diabetes. However, translation of the evidence on the built environment into effective policy and planning changes requires engagement and collaboration between multiple sectors and government agencies for designing neighborhoods that are more conducive to healthy and active living. In this study, we identified knowledge gaps and other barriers to evidence-based decision-making and policy development related to the built environment; as well as the infrastructure, processes, and mechanisms needed to drive policy changes in this area. We conducted a qualitative thematic analysis of data collected through consultations with a broad group of stakeholders (N = 42) from Southern Ontario, Canada, within various sectors (public health, urban planning, and transportation) and levels of government (federal, provincial, and municipalities). Relevant themes were classified based on the specific phase of the knowledge-to-action cycle (research, translation, and implementation) in which they were most closely aligned. We identified 5 themes including: 1) the need for policy-informed and actionable research (e.g. health economic analyses and policy evaluations); 2) impactful messaging that targets all relevant sectors to create the political will necessary to drive policy change; 3) common measures and tools to increase capacity for monitoring and surveillance of built environment changes; (4) intersectoral collaboration and alignment within and between levels of government to enable collective actions and provide mechanisms for sharing of resources and expertise, (5) aligning public and private sector priorities to generate public demand and support for community action; and, (6) solution-focused implementation of research that will be tailored to meet the needs of policymakers and planners. Additional research priorities and key policy and planning actions were also noted. Our research highlights the necessity of involving stakeholders in identifying inter-sectoral solutions to develop and translate actionable research on the built environment into effective policy and planning initiatives.
Commuting Mode Choice in a High-Density City: Do Land-Use Density and Diversity Matter in Hong Kong?
Sun, Guibo; Sarkar, Chinmoy; Xiao, Yang
2018-01-01
Hong Kong is a densely populated and transit-oriented Chinese city, which provides an ideal urban environment with which to study the various successful facets of land use policy as a model for potential replication to curb increasing car use in other Chinese cities. We examine the commuting mode choice of 203,900 households living in 4768 street blocks in Hong Kong from 2011 census. A street block is the smallest planning unit, made up of one or more housing estates with a homogenous built environment and socioeconomic status. The built environment is measured using the five Ds framework, an international dimensioning framework for classifying and measuring attributes of the built environment for physical activity and travel behaviors. Generalized, multi-level mixed models were applied to detect the associations between travel choice and built environment characteristics, while adjusting for socioeconomic status. Design and destination accessibility had greater effects on the choices to walk and take public transport than on the choice to drive. Density and diversity had only marginal effects on mode choice. Unexpectedly, distance to the urban center had the opposite effect on automobile use to that found in Western studies. Hong Kong residents living close to the urban center were more likely to drive for commuting trips. The contrasting findings between our study and Western studies suggest that the associations between a high-density built environment and travel choice vary with urban context. PMID:29734721
Electronic Gaming Machine (EGM) Environments: Market Segments and Risk.
Rockloff, Matthew; Moskovsky, Neda; Thorne, Hannah; Browne, Matthew; Bryden, Gabrielle
2017-12-01
This study used a marketing-research paradigm to explore gamblers' attraction to EGMs based on different elements of the environment. A select set of environmental features was sourced from a prior study (Thorne et al. in J Gambl Issues 2016b), and a discrete choice experiment was conducted through an online survey. Using the same dataset first described by Rockloff et al. (EGM Environments that contribute to excess consumption and harm, 2015), a sample of 245 EGM gamblers were sourced from clubs in Victoria, Australia, and 7516 gamblers from an Australian national online survey-panel. Participants' choices amongst sets of hypothetical gambling environments allowed for an estimation of the implied individual-level utilities for each feature (e.g., general sounds, location, etc.). K-means clustering on these utilities identified four unique market segments for EGM gambling, representing four different types of consumers. The segments were named according to their dominant features: Social, Value, High Roller and Internet. We found that the environments orientated towards the Social and Value segments were most conducive to attracting players with relatively few gambling problems, while the High Roller and Internet-focused environments had greater appeal for players with problems and vulnerabilities. This study has generated new insights into the kinds of gambling environments that are most consistent with safe play.
Malecki, Kristen C; Engelman, Corinne D; Peppard, Paul E; Nieto, F Javier; Grabow, Maggie L; Bernardinello, Milena; Bailey, Erin; Bersch, Andrew J; Walsh, Matthew C; Lo, Justin Y; Martinez-Donate, Ana
2014-11-13
Growing evidence suggests that mixed methods approaches to measuring neighborhood effects on health are needed. The Wisconsin Assessment of the Social and Built Environment (WASABE) is an objective audit tool designed as an addition to a statewide household-based health examination survey, the Survey of the Health of Wisconsin (SHOW), to objectively measure participant's neighborhoods. This paper describes the development and implementation of the WASABE and examines the instrument's ability to capture a range of social and built environment features in urban and rural communities. A systematic literature review and formative research were used to create the tool. Inter-rater reliability parameters across items were calculated. Prevalence and density of features were estimated for strata formed according to several sociodemographic and urbanicity factors. The tool is highly reliable with over 81% of 115 derived items having percent agreement above 95%. It captured variance in neighborhood features in for a diverse sample of SHOW participants. Sidewalk density in neighborhoods surrounding households of participants living at less than 100% of the poverty level was 67% (95% confidence interval, 55-80%) compared to 34% (25-44%) for those living at greater than 400% of the poverty level. Walking and biking trails were present in 29% (19-39%) of participant buffer in urban areas compared to only 7% (2-12%) in rural communities. Significant environmental differences were also observed for white versus non-white, high versus low income, and college graduates versus individuals with lower level of education. The WASABE has strong inter-rater reliability and validity properties. It builds on previous work to provide a rigorous and standardized method for systematically gathering objective built and social environmental data in a number of geographic settings. Findings illustrate the complex milieu of built environment features found in participants neighborhoods and have relevance for future research, policy, and community engagement purposes.
Scale-space for empty catheter segmentation in PCI fluoroscopic images.
Bacchuwar, Ketan; Cousty, Jean; Vaillant, Régis; Najman, Laurent
2017-07-01
In this article, we present a method for empty guiding catheter segmentation in fluoroscopic X-ray images. The guiding catheter, being a commonly visible landmark, its segmentation is an important and a difficult brick for Percutaneous Coronary Intervention (PCI) procedure modeling. In number of clinical situations, the catheter is empty and appears as a low contrasted structure with two parallel and partially disconnected edges. To segment it, we work on the level-set scale-space of image, the min tree, to extract curve blobs. We then propose a novel structural scale-space, a hierarchy built on these curve blobs. The deep connected component, i.e. the cluster of curve blobs on this hierarchy, that maximizes the likelihood to be an empty catheter is retained as final segmentation. We evaluate the performance of the algorithm on a database of 1250 fluoroscopic images from 6 patients. As a result, we obtain very good qualitative and quantitative segmentation performance, with mean precision and recall of 80.48 and 63.04% respectively. We develop a novel structural scale-space to segment a structured object, the empty catheter, in challenging situations where the information content is very sparse in the images. Fully-automatic empty catheter segmentation in X-ray fluoroscopic images is an important and preliminary step in PCI procedure modeling, as it aids in tagging the arrival and removal location of other interventional tools.
Rube, Kate; Veatch, Maggie; Huang, Katy; Lent, Megan; Goldstein, Gail P.; Lee, Karen K.
2014-01-01
Local health departments (LHDs) have a key role to play in developing built environment policies and programs to encourage physical activity and combat obesity and related chronic diseases. However, information to guide LHDs’ effective engagement in this arena is lacking. During 2011–2012, the New York City Department of Health and Mental Hygiene (DOHMH) facilitated a built environment peer mentoring program for 14 LHDs nationwide. Program objectives included supporting LHDs in their efforts to achieve built environment goals, offering examples from DOHMH’s built environment work to guide LHDs, and building a healthy built environment learning network. We share lessons learned that can guide LHDs in developing successful healthy built environment agendas. PMID:24625166
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-06
... subordinate its rights, acquired under the Wetland Reserve Program, to allow the Gulf Coast Segment (Gulf.... Department of State (DOS) to build and operate the Keystone XL Project. In the original application, Trans... built in three segments: The approximately 850-mile long ``Steele City'' segment from the U.S. border to...
Space Adaptation of Active Mirror Segment Concepts
NASA Technical Reports Server (NTRS)
Ames, Gregory H.
1999-01-01
This report summarizes the results of a three year effort by Blue Line Engineering Co. to advance the state of segmented mirror systems in several separate but related areas. The initial set of tasks were designed to address the issues of system level architecture, digital processing system, cluster level support structures, and advanced mirror fabrication concepts. Later in the project new tasks were added to provide support to the existing segmented mirror testbed at Marshall Space Flight Center (MSFC) in the form of upgrades to the 36 subaperture wavefront sensor. Still later, tasks were added to build and install a new system processor based on the results of the new system architecture. The project was successful in achieving a number of important results. These include the following most notable accomplishments: 1) The creation of a new modular digital processing system that is extremely capable and may be applied to a wide range of segmented mirror systems as well as many classes of Multiple Input Multiple Output (MIMO) control systems such as active structures or industrial automation. 2) A new graphical user interface was created for operation of segmented mirror systems. 3) The development of a high bit rate serial data loop that permits bi-directional flow of data to and from as many as 39 segments daisy-chained to form a single cluster of segments. 4) Upgrade of the 36 subaperture Hartmann type Wave Front Sensor (WFS) of the Phased Array Mirror, Extendible Large Aperture (PAMELA) testbed at MSFC resulting in a 40 to 5OX improvement in SNR which in turn enabled NASA personnel to achieve many significant strides in improved closed-loop system operation in 1998. 5) A new system level processor was built and delivered to MSFC for use with the PAMELA testbed. This new system featured a new graphical user interface to replace the obsolete and non-supported menu system originally delivered with the PAMELA system. The hardware featured Blue Line's new stackable processing system which included fiber optic data links, a WFS digital interface, and a very compact and reliable electronics package. The project also resulted in substantial advances in the evolution of concepts for integrated structures to be used to support clusters of segments while also serving as the means to distribute power, timing, and data communications resources. A prototype cluster base was built and delivered that would support a small array of 7 cm mirror segments. Another conceptual design effort led to substantial progress in the area of laminated silicon mirror segments. While finished mirrors were never successfully produced in this exploratory effort, the basic feasibility of the concept was established through a significant amount of experimental development in microelectronics processing laboratories at the University of Colorado in Colorado Springs. Ultimately lightweighted aluminum mirrors with replicated front surfaces were produced and delivered as part of a separate contract to develop integrated segmented mirror assemblies. Overall the project was very successful in advancing segmented mirror system architectures on several fronts. In fact, the results of this work have already served as the basic foundation for the system architectures of several projects proposed by Blue Line for different missions and customers. These include the NMSD and AMSD procurements for NASA's Next Generation Space Telescope, the HET figure maintenance system, and the 1 meter FAST telescope project.
Modelling population distribution using remote sensing imagery and location-based data
NASA Astrophysics Data System (ADS)
Song, J.; Prishchepov, A. V.
2017-12-01
Detailed spatial distribution of population density is essential for city studies such as urban planning, environmental pollution and city emergency, even estimate pressure on the environment and human exposure and risks to health. However, most of the researches used census data as the detailed dynamic population distribution are difficult to acquire, especially in microscale research. This research describes a method using remote sensing imagery and location-based data to model population distribution at the function zone level. Firstly, urban functional zones within a city were mapped by high-resolution remote sensing images and POIs. The workflow of functional zones extraction includes five parts: (1) Urban land use classification. (2) Segmenting images in built-up area. (3) Identification of functional segments by POIs. (4) Identification of functional blocks by functional segmentation and weight coefficients. (5) Assessing accuracy by validation points. The result showed as Fig.1. Secondly, we applied ordinary least square and geographically weighted regression to assess spatial nonstationary relationship between light digital number (DN) and population density of sampling points. The two methods were employed to predict the population distribution over the research area. The R²of GWR model were in the order of 0.7 and typically showed significant variations over the region than traditional OLS model. The result showed as Fig.2.Validation with sampling points of population density demonstrated that the result predicted by the GWR model correlated well with light value. The result showed as Fig.3. Results showed: (1) Population density is not linear correlated with light brightness using global model. (2) VIIRS night-time light data could estimate population density integrating functional zones at city level. (3) GWR is a robust model to map population distribution, the adjusted R2 of corresponding GWR models were higher than the optimal OLS models, confirming that GWR models demonstrate better prediction accuracy. So this method provide detailed population density information for microscale citizen studies.
Hoffman, Geoffrey J; Rodriguez, Hector P
2015-12-01
The objectives were to assess the associations between fall-related injuries (FRIs) treated in the emergency department (ED) among older adults in California and contextual county-level physical, social, and economic characteristics, and to assess how county-level economic conditions are associated with FRIs when controlling for other county-level factors. Data from 2008 California ED discharge, Medicare Impact File, and County Health Rankings were used. Random effects logistic regression models estimated contextual associations between county-level factors representing economic conditions, the built environment, community safety, access to care, and obesity with patient-level FRI treatment among 1,712,409 older adults, controlling for patient-level and hospital-level characteristics. Patient-level predictors of FRI treatment were consistent with previous studies not accounting for contextual associations. Larger and rural hospitals had higher odds of FRI treatment, while teaching and safety net hospitals had lower odds. Better county economic conditions were associated with greater odds (ß=0.73, P=0.001) and higher county-level obesity were associated with lower odds (ß=-0.37, P=0.004), but safer built environments (ß=-0.31, P=0.38) were not associated with FRI treatment. The magnitude of association between county-level economic conditions and FRI treatment attenuated with the inclusion of county-level obesity rates. FRI treatment was most strongly and consistently related to more favorable county economic conditions, suggesting differences in treatment or preferences for treatment for FRIs among older individuals in communities of varying resource levels. Using population health data on FRIs, policy makers may be able to remove barriers unique to local contexts when implementing falls prevention educational programs and built environment modifications.
Rodriguez, Hector P.
2015-01-01
Abstract The objectives were to assess the associations between fall-related injuries (FRIs) treated in the emergency department (ED) among older adults in California and contextual county-level physical, social, and economic characteristics, and to assess how county-level economic conditions are associated with FRIs when controlling for other county-level factors. Data from 2008 California ED discharge, Medicare Impact File, and County Health Rankings were used. Random effects logistic regression models estimated contextual associations between county-level factors representing economic conditions, the built environment, community safety, access to care, and obesity with patient-level FRI treatment among 1,712,409 older adults, controlling for patient-level and hospital-level characteristics. Patient-level predictors of FRI treatment were consistent with previous studies not accounting for contextual associations. Larger and rural hospitals had higher odds of FRI treatment, while teaching and safety net hospitals had lower odds. Better county economic conditions were associated with greater odds (ß=0.73, P=0.001) and higher county-level obesity were associated with lower odds (ß=−0.37, P=0.004), but safer built environments (ß=−0.31, P=0.38) were not associated with FRI treatment. The magnitude of association between county-level economic conditions and FRI treatment attenuated with the inclusion of county-level obesity rates. FRI treatment was most strongly and consistently related to more favorable county economic conditions, suggesting differences in treatment or preferences for treatment for FRIs among older individuals in communities of varying resource levels. Using population health data on FRIs, policy makers may be able to remove barriers unique to local contexts when implementing falls prevention educational programs and built environment modifications. (Population Health Management 2015;18:437–448) PMID:25919228
The association between community environment and cognitive function: a systematic review.
Wu, Yu-Tzu; Prina, A Matthew; Brayne, Carol
2015-03-01
The aim of this study is to review the published evidence on the association between community environment and cognitive function in older people, focusing on the findings and a critique of the existing studies. A literature search was conducted to identify studies linking the community environment and cognitive function in older people. The results and methodological factors, including the definition of community, individual level characteristics and the measurements of cognitive function and community environment were extracted from each study. The measurements of community environment were mainly categorized into two types: compositional, generated by aggregating individual and household data (community-level socioeconomic status, deprivation index) and contextual, targeting at the features of built or social environment in local areas (green space, street conditions, crime rate). Fourteen of the fifteen studies used compositional measurements such as community-level socioeconomic status and deprivation index and significant associations were found in eleven studies. Some individual level factors (ethnicity, genotype and socioeconomic status) were found to modify the association between community environment and cognitive function. Few contextual measurements were included in the existing studies. A conceptual framework for the pathway from community environment to cognitive function of older people is provided in this review. To disentangle the additional effect of place from individual risk factors and investigate the casual direction of community environment and cognition in later life, longitudinal studies with measurements targeting built and social environments of community and change of cognitive functions over time need to be included in future studies.
Segments on Western Rim of Endeavour Crater, Mars
2017-04-19
This orbital image of the western rim of Mars' Endeavour Crater covers an area about 5 miles (8 kilometers) east-west by about 9 miles (14 kilometers) north-south and indicates the names of some of the raised segments of the rim. NASA's Mars Exploration Rover Opportunity arrived at Endeavour in 2011 after exploring smaller craters to the northwest during its first six years on Mars. It initially explored the "Cape York" segment, then headed south. It reached the northern end of "Cape Tribulation" in late 2014 and the southern tip of that segment in April 2017. A key destination in the "Cape Byron" segment is "Perseverance Valley," where the rover team plans to investigate whether the valley was carved by water, wind or a debris flow initiated by water. This image is from the Context Camera on NASA's Mars Reconnaissance Orbiter. Malin Space Science Systems, San Diego, California, built and operates that camera. NASA's Jet Propulsion Laboratory, a division of Caltech in Pasadena, California, built and operates Opportunity. https://photojournal.jpl.nasa.gov/catalog/PIA21490
2013-01-01
Background Excessive weight gain among youth is an ongoing public health concern. Despite evidence linking both policies and the built environment to adolescent and adult overweight, the association between health policies or the built environment and overweight are often overlooked in research with children. The purpose of this study was to examine if school-based physical activity policies and the built environment surrounding a school are associated with weight status among children. Methods Objectively measured height and weight data were available for 2,331 grade 1 to 4 students (aged 6 to 9 years) attending 30 elementary schools in Ontario, Canada. Student-level data were collected using parent reports and the PLAY-On questionnaire administered to students by study nurses. School-level policy data were collected from school administrators using the Physical Activity Module of the Healthy School Planner tool, and built environment data were provided by the Enhanced Points of Interest data resource. Multi-level logistic regression models were used to examine the school- and student-level characteristics associated with the odds of a student being overweight or obese. Results There was significant between-school random variation in the odds of a student being overweight [σ2μ0 = 0.274(0.106), p < 0.001], but not for being obese [σ2μ0 = 0.115(0.089)]. If a student attended a school that provided student access to a variety of facilities on and off school grounds during school hours or supported active transportation to and from school, he/she was less likely to overweight than a similar student attending a school without these policies. Characteristics of the built environment were not associated with overweight or obesity among this large cross-sectional sample of children. Conclusions This new evidence suggests that it may be wise to target obesity prevention efforts to schools that do not provide student access to recreation facilities during school hours or schools that do not support active transportation for students. Future research should evaluate if school-based overweight and obesity prevention programming might be improved if interventions selectively targeted the school characteristics that are putting students at the greatest risk. PMID:24139176
Validation of the COURAGE Built Environment Self-Reported Questionnaire.
Raggi, Alberto; Quintas, Rui; Bucciarelli, Paola; Franco, Maria Grazia; Andreotti, Alessandra; Miret, Marta; Zawisza, Katarzyna; Olaya, Beatriz; Chatterji, Somnath; Sainio, Päivi; Frisoni, Giovanni Battista; Martinuzzi, Andrea; Minicuci, Nadia; Power, Mick; Leonardi, Matilde
2014-01-01
The built environment (BE) impacts on people's disability and health, in terms of overweight, depression, alcohol abuse, poor self-rated health and presence of psychological symptoms; it is reasonable to assume that BE also impacts on participation levels. This paper presents the validation of the COURAGE Built Environment Self-Reported Questionnaire (CBE-SR), an instrument designed to evaluate BE in the context of health and disability. Subjects participating to COURAGE, a cross-sectional study conducted on 10,800 citizens of Poland, Finland and Spain, completed a protocol inclusive of the CBE-SR. Psychometric properties and factor structure were analysed, and factor scores created. Gender differences, differences between persons from different age groups and persons reporting the environment as facilitating, hindering or neutral were calculated. Eight items were deleted so that the final version of CBE-SR comprises 19 items. Cronbach's alpha ranged from 0.743 to 0.906, and test-retest stability was demonstrated for the majority of items. Four subscales were identified: Usability of the neighbourhood environment; Hindrance of walkable environment; Easiness of use of public buildings, places and facilities; and Risk of accidents and usability of the living place. Younger respondents reported their neighbourhood as more usable but perceived walkways as more hindering and public buildings as less easy to use; gender differences were almost inexistent. The CBE-SR is a four-scale instrument with good psychometric properties that measures the person-environment interaction. It is sensitive across age groups and is consistent with the subject's overall judgement of the degree to which the environment is facilitating or hindering. Poor built environments have a negative impact on the level of a person's participation. However, instruments measuring the person-environment interaction are lacking. The CBE-SR is a valid and reliable instrument that researchers can use to assess the relationships between the intrinsic health state and the objective features of the environment. Understanding this relationship would provide further insight into the need of addressing the individual's functioning either by means of interventions directed to the individual or by making changes to the individual's environment. Copyright © 2013 John Wiley & Sons, Ltd.
Influence of fuels, weather and the built environment on the exposure of property to wildfire
Penman, Trent D.; Collins, Luke S.; Syphard, Alexandra D.; Keeley, Jon E.; Bradstock, Ross A.
2014-01-01
Wildfires can pose a significant risk to people and property. Billions of dollars are spent investing in fire management actions in an attempt to reduce the risk of loss. One of the key areas where money is spent is through fuel treatment – either fuel reduction (prescribed fire) or fuel removal (fuel breaks). Individual treatments can influence fire size and the maximum distance travelled from the ignition and presumably risk, but few studies have examined the landscape level effectiveness of these treatments. Here we use a Bayesian Network model to examine the relative influence of the built and natural environment, weather, fuel and fuel treatments in determining the risk posed from wildfire to the wildland-urban interface. Fire size and distance travelled was influenced most strongly by weather, with exposure to fires most sensitive to changes in the built environment and fire parameters. Natural environment variables and fuel load all had minor influences on fire size, distance travelled and exposure of assets. These results suggest that management of fuels provided minimal reductions in risk to assets and adequate planning of the changes in the built environment to cope with the expansion of human populations is going to be vital for managing risk from fire under future climates.
Influence of Fuels, Weather and the Built Environment on the Exposure of Property to Wildfire
Penman, Trent D.; Collins, Luke; Syphard, Alexandra D.; Keeley, Jon E.; Bradstock, Ross A.
2014-01-01
Wildfires can pose a significant risk to people and property. Billions of dollars are spent investing in fire management actions in an attempt to reduce the risk of loss. One of the key areas where money is spent is through fuel treatment – either fuel reduction (prescribed fire) or fuel removal (fuel breaks). Individual treatments can influence fire size and the maximum distance travelled from the ignition and presumably risk, but few studies have examined the landscape level effectiveness of these treatments. Here we use a Bayesian Network model to examine the relative influence of the built and natural environment, weather, fuel and fuel treatments in determining the risk posed from wildfire to the wildland-urban interface. Fire size and distance travelled was influenced most strongly by weather, with exposure to fires most sensitive to changes in the built environment and fire parameters. Natural environment variables and fuel load all had minor influences on fire size, distance travelled and exposure of assets. These results suggest that management of fuels provided minimal reductions in risk to assets and adequate planning of the changes in the built environment to cope with the expansion of human populations is going to be vital for managing risk from fire under future climates. PMID:25360741
Ren, Yanjun; Liu, Qingmin; Cao, Chengjian; Su, Meng; Lyu, Jun; Li, Liming
2015-10-01
To understand the perceptions of physical activity-related built environment among urban adults in Hangzhou. A face-to-face interview was conducted among the urban residents aged 25-59 years selected through multistage stratified random sampling in Hangzhou in 2012. The Neighborhood Environment Walkability Scale-Abbreviated (NEWS-A) was used to assess the perception of built environment among residents, including residential building density, the diversities of stores, facilities and others, the accessibility to public service, the street connectivity, walking/cycling facilities, aesthetics, traffic safety, and public security. The multilevel logistic regression model was used to assess the demographic characteristics, BMI and other factors' influence on people's perceptions. Among 1 362 local residents surveyed, no sex, martial status and occupation specific significant differences in the perception of built environment were found. After adjusting other factors, the age group 45-59 years was positively related to the score of street connectivity (OR=2.02, 95% CI: 1.30-3.15). The educational level of college or higher was positively associated with the score of residential building density (OR=1.97, 95% CI: 1.29-3.00) but negatively associated with the score of facility variety (OR=0.65, 95% CI: 0.43-0.97). Overweight or obesity was negatively related to the scores of walking/cycling ways (OR=0.67, 95%CI: 0.48-0.95) and public security (OR=0.75, 95% CI: 0.57-0.99). Compared with the class I residential area, the people in class III residential area had lower perception scores on facility diversity (OR=0.11, 95% CI: 0.04-0.30), accessibility to public service (OR=0.33, 95% CI: 0.11-0.95), street connectivity (OR=0.30, 95% CI: 0.11-0.86) and traffic safety (OR=0.39, 95% CI: 0.17-0.91). The perceptions of physical activity-related built environment was associated with age, educational level, BMI and residential area. The personal characteristics should be considered while performing environment intervention on physical activity.
Gao, Bin; Li, Xiaoqing; Woo, Wai Lok; Tian, Gui Yun
2018-05-01
Thermographic inspection has been widely applied to non-destructive testing and evaluation with the capabilities of rapid, contactless, and large surface area detection. Image segmentation is considered essential for identifying and sizing defects. To attain a high-level performance, specific physics-based models that describe defects generation and enable the precise extraction of target region are of crucial importance. In this paper, an effective genetic first-order statistical image segmentation algorithm is proposed for quantitative crack detection. The proposed method automatically extracts valuable spatial-temporal patterns from unsupervised feature extraction algorithm and avoids a range of issues associated with human intervention in laborious manual selection of specific thermal video frames for processing. An internal genetic functionality is built into the proposed algorithm to automatically control the segmentation threshold to render enhanced accuracy in sizing the cracks. Eddy current pulsed thermography will be implemented as a platform to demonstrate surface crack detection. Experimental tests and comparisons have been conducted to verify the efficacy of the proposed method. In addition, a global quantitative assessment index F-score has been adopted to objectively evaluate the performance of different segmentation algorithms.
The spatial clustering of obesity: does the built environment matter?
Huang, R; Moudon, A V; Cook, A J; Drewnowski, A
2015-12-01
Obesity rates in the USA show distinct geographical patterns. The present study used spatial cluster detection methods and individual-level data to locate obesity clusters and to analyse them in relation to the neighbourhood built environment. The 2008-2009 Seattle Obesity Study provided data on the self-reported height, weight, and sociodemographic characteristics of 1602 King County adults. Home addresses were geocoded. Clusters of high or low body mass index were identified using Anselin's Local Moran's I and a spatial scan statistic with regression models that searched for unmeasured neighbourhood-level factors from residuals, adjusting for measured individual-level covariates. Spatially continuous values of objectively measured features of the local neighbourhood built environment (SmartMaps) were constructed for seven variables obtained from tax rolls and commercial databases. Both the Local Moran's I and a spatial scan statistic identified similar spatial concentrations of obesity. High and low obesity clusters were attenuated after adjusting for age, gender, race, education and income, and they disappeared once neighbourhood residential property values and residential density were included in the model. Using individual-level data to detect obesity clusters with two cluster detection methods, the present study showed that the spatial concentration of obesity was wholly explained by neighbourhood composition and socioeconomic characteristics. These characteristics may serve to more precisely locate obesity prevention and intervention programmes. © 2014 The British Dietetic Association Ltd.
2014-01-01
Background Previous studies testing the association between the built environment and walking behavior have been largely cross-sectional and have yielded mixed results. This study reports on a natural experiment in which changes to the built environment were implemented at a university campus in Hong Kong. Longitudinal data on walking behaviors were collected using surveys, one before and one after changes to the built environment, to test the influence of changes to the built environment on walking behavior. Methods Built environment data are from a university campus in Hong Kong, and include land use, campus bus services, pedestrian network, and population density data collected from campus maps, the university developmental office, and field surveys. Walking behavior data were collected at baseline in March 2012 (n = 198) and after changes to the built environment from the same cohort of subjects in December 2012 (n = 169) using a walking diary. Geographic information systems (GIS) was used to map walking routes and built environment variables, and compare each subject’s walking behaviors and built environment exposure before and after the changes to the built environment. Walking behavior outcomes were changes in: i) walking distance, ii) destination-oriented walking, and iii) walked altitude range. Multivariable linear regression models were used to test for associations between changes to the built environment and changes in walking behaviors. Results Greater pedestrian network connectivity predicted longer walking distances and an increased likelihood of walking as a means of transportation. The increased use of recreational (vs. work) buildings, largely located at mid-range altitudes, as well as increased population density predicted greater walking distances.Having more bus services and a greater population density encouraged people to increase their walked altitude range. Conclusions In this longitudinal study, changes to the built environment were associated with changes in walking behaviors. Use of GIS combined with walking diaries presents a practical method for mapping and measuring changes in the built environment and walking behaviors, respectively. Additional longitudinal studies can help clarify the relationships between the built environment and walking behaviors identified in this natural experiment. PMID:25069949
King, Katherine E.
2014-01-01
Substantial research documents higher pollution levels in minority neighborhoods, but little research evaluates how residents perceive their own communities’ pollution risks. According to “Neighborhood stigma” theory, survey respondents share a cultural bias that minorities cause social dysfunction, leading to over-reports of dysfunction in minority communities. This study investigates perceptions of residential outdoor air quality by linking objective data on built and social environments with multiple measures of pollution and a representative survey of Chicago residents. Consistent with the scholarly narrative, results show air quality is rated worse where minorities and poverty are concentrated, even after extensive adjustment for objective pollution and built environment measures. Perceptions of air pollution may thus be driven by neighborhood socioeconomic position far more than by respondents’ ability to perceive pollution. The finding that 63.5% of the sample reported excellent or good air quality helps to explain current challenging in promoting environmental action. PMID:26527847
The built environment and alcohol consumption in urban neighborhoods.
Bernstein, Kyle T; Galea, Sandro; Ahern, Jennifer; Tracy, Melissa; Vlahov, David
2007-12-01
To examine the relations between characteristics of the neighborhood built environment and recent alcohol use. We recruited participants through a random digit dial telephone survey of New York City (NYC) residents. Alcohol consumption was assessed using a structured interview. All respondents were assigned to neighborhood of residence. Data on the internal and external built environment in 59 NYC neighborhoods were collected from archival sources. Multilevel models were used to assess the adjusted relations between features of the built environment and alcohol use. Of the 1355 respondents, 40% reported any alcohol consumption in the past 30 days, and 3% reported more than five drinks in one sitting (heavy drinking) in the past 30 days. Few characteristics of the built environment were associated with any alcohol use in the past 30 days. However, several features of the internal and external built environment were associated with recent heavy drinking. After adjustment, persons living in neighborhoods characterized by poorer features of the built environment were up to 150% more likely to report heavy drinking in the last 30 days compared to persons living in neighborhoods characterized by a better built environment. Quality of the neighborhood built environment may be associated with heavy alcohol consumption in urban populations, independent of individual characteristics. The role of the residential environment as a determinant of alcohol abuse warrants further examination.
A soft actuation system for segmented reflector articulation and isolation
NASA Technical Reports Server (NTRS)
Agronin, Michael L.; Jandura, Louise
1990-01-01
Segmented reflectors have been proposed for space based applications such as optical communication and large diameter telescopes. An actuation system for mirrors in a space based segmented mirror array was developed as part of NASA's Precision Segmented Reflector program. The actuation system, called the Articulated Panel Module (APM), provides 3 degrees of freedom mirror articulation, gives isolation from structural motion, and simplifies space assembly of the mirrors to the reflector backup truss. A breadboard of the APM was built and is described.
Perez, L G; Carlson, J; Slymen, D J; Patrick, K; Kerr, J; Godbole, S; Elder, J P; Ayala, G X; Arredondo, E M
2016-12-01
Favorable perceptions of the built and social neighborhood environment may promote outdoor physical activity (PA). However, little is known about their independent and interactive effects on neighborhood-specific outdoor PA. We examined associations of perceived built and social neighborhood environment factors, and their interactions, with objectively-measured neighborhood outdoor moderate-to-vigorous physical activity (MVPA) among a sample of Latina women in San Diego, CA. Analyses included baseline data collected in 2011-2013 from 86 Latinas with ≥ 2 days of combined accelerometer and global positioning system data and complete survey measures. We examined objective neighborhood outdoor MVPA within 500-meter home buffers. Generalized linear mixed models examined associations of 3 perceived built (e.g., sidewalk maintenance) and 3 social environmental (e.g., safety from crime) factors with engaging in any daily neighborhood outdoor MVPA. Models tested interactions between the built and social environmental factors. Although the perceived neighborhood environmental factors were not significantly related to daily neighborhood outdoor MVPA, we found 2 significant interactions: perceived sidewalk maintenance x safety from crime ( p = 0.05) and neighborhood aesthetics x neighborhood social cohesion ( p = 0.03). Sidewalk maintenance was positively related to daily neighborhood outdoor MVPA only among Latinas that reported low levels of safety from crime. Neighborhood aesthetics was positively related to daily neighborhood outdoor MVPA only among Latinas with high neighborhood social cohesion. Findings suggest several built and social environmental factors interact to influence Latinas' neighborhood outdoor MVPA. Interventions are needed targeting both built and social neighborhood environmental factors favorable to outdoor PA in the neighborhood.
As-built design specification for segment map (Sgmap) program
NASA Technical Reports Server (NTRS)
Tompkins, M. A. (Principal Investigator)
1981-01-01
The segment map program (SGMAP), which is part of the CLASFYT package, is described in detail. This program is designed to output symbolic maps or numerical dumps from LANDSAT cluster/classification files or aircraft ground truth/processed ground truth files which are in 'universal' format.
The built environment moderates effects of family-based childhood obesity treatment over 2 years.
Epstein, Leonard H; Raja, Samina; Daniel, Tinuke Oluyomi; Paluch, Rocco A; Wilfley, Denise E; Saelens, Brian E; Roemmich, James N
2012-10-01
Research suggests the neighborhood built environment is related to child physical activity and eating. The purpose of this study was to determine if characteristics of the neighborhood environment moderate the relationship between obesity treatment and weight loss, and if outcomes of particular treatments are moderated by built environment characteristics. The relationship between the built environment and standardized BMI (zBMI) changes for 191 8-12-year-old children who participated in one of four randomized, controlled trials of pediatric weight management was assessed using mixed models analysis of covariance. At 2-year follow-up, greater parkland, fewer convenience stores, and fewer supermarkets were associated with greater zBMI reduction across all interventions. No treatments interacted with characteristics of the built environment. Activity- and eating-related built neighborhood characteristics are associated with child success in behavioral obesity treatments. Efficacy may be improved by individualizing treatments based on built environment characteristics.
Badland, Hannah M; Schofield, Grant M; Witten, Karen; Schluter, Philip J; Mavoa, Suzanne; Kearns, Robin A; Hinckson, Erica A; Oliver, Melody; Kaiwai, Hector; Jensen, Victoria G; Ergler, Christina; McGrath, Leslie; McPhee, Julia
2009-07-10
Built environment attributes are recognized as being important contributors to physical activity (PA) engagement and body size in adults and children. However, much of the existing research in this emergent public health field is hindered by methodological limitations, including: population and site homogeneity, reliance on self-report measures, aggregated measures of PA, and inadequate statistical modeling. As an integral component of multi-country collaborative research, the Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study seeks to overcome these limitations by determining the strengths of association between detailed measures of the neighborhood built environment with PA levels across multiple domains and body size measures in adults and children. This article outlines the research protocol developed for the URBAN Study. The URBAN Study is a multi-centered, stratified, cross-sectional research design, collecting data across four New Zealand cities. Within each city, 12 neighborhoods were identified and selected for investigation based on higher or lower walkability and Māori demographic attributes. Neighborhoods were selected to ensure equal representation of these characteristics. Within each selected neighborhood, 42 households are being randomly selected and an adult and child (where possible) recruited into the study. Data collection includes: objective and self-reported PA engagement, neighborhood perceptions, demographics, and body size measures. The study was designed to recruit approximately 2,000 adults and 250 children into the project. Other aspects of the study include photovoice, which is a qualitative assessment of built environment features associated with PA engagement, an audit of the neighborhood streetscape environment, and an individualized neighborhood walkability profile centered on each participant's residential address. Multilevel modeling will be used to examine the individual-level and neighborhood-level relationships with PA engagement and body size. The URBAN Study is applying a novel scientifically robust research design to provide urgently needed epidemiological information regarding the associations between the built environment and health outcomes. The findings will contribute to a larger, international initiative in which similar neighborhood selection and PA measurement procedures are utilized across eight countries. Accordingly, this study directly addresses the international priority issues of increasing PA engagement and decreasing obesity levels.
Badland, Hannah M; Schofield, Grant M; Witten, Karen; Schluter, Philip J; Mavoa, Suzanne; Kearns, Robin A; Hinckson, Erica A; Oliver, Melody; Kaiwai, Hector; Jensen, Victoria G; Ergler, Christina; McGrath, Leslie; McPhee, Julia
2009-01-01
Background Built environment attributes are recognized as being important contributors to physical activity (PA) engagement and body size in adults and children. However, much of the existing research in this emergent public health field is hindered by methodological limitations, including: population and site homogeneity, reliance on self-report measures, aggregated measures of PA, and inadequate statistical modeling. As an integral component of multi-country collaborative research, the Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study seeks to overcome these limitations by determining the strengths of association between detailed measures of the neighborhood built environment with PA levels across multiple domains and body size measures in adults and children. This article outlines the research protocol developed for the URBAN Study. Methods and design The URBAN Study is a multi-centered, stratified, cross-sectional research design, collecting data across four New Zealand cities. Within each city, 12 neighborhoods were identified and selected for investigation based on higher or lower walkability and Māori demographic attributes. Neighborhoods were selected to ensure equal representation of these characteristics. Within each selected neighborhood, 42 households are being randomly selected and an adult and child (where possible) recruited into the study. Data collection includes: objective and self-reported PA engagement, neighborhood perceptions, demographics, and body size measures. The study was designed to recruit approximately 2,000 adults and 250 children into the project. Other aspects of the study include photovoice, which is a qualitative assessment of built environment features associated with PA engagement, an audit of the neighborhood streetscape environment, and an individualized neighborhood walkability profile centered on each participant's residential address. Multilevel modeling will be used to examine the individual-level and neighborhood-level relationships with PA engagement and body size. Discussion The URBAN Study is applying a novel scientifically robust research design to provide urgently needed epidemiological information regarding the associations between the built environment and health outcomes. The findings will contribute to a larger, international initiative in which similar neighborhood selection and PA measurement procedures are utilized across eight countries. Accordingly, this study directly addresses the international priority issues of increasing PA engagement and decreasing obesity levels. PMID:19589175
The importance of the food and physical activity environments.
Oppert, Jean-Michel; Charreire, Hélène
2012-01-01
There is increasing interest in identifying characteristics of neighborhood environments (physical, social, economical) that might favor unhealthy dietary and physical activity patterns leading to excess weight at population level. Measurement of characteristics of the physical environment in relation to food and physical activity has greatly improved in recent years. Methods based on assessment of perceptions by residents of their neighborhood or on objective assessment of the actual built environment (such as provided by Geographic Information Systems tools) would benefit to be combined. A number of recent systematic reviews have updated our knowledge on relationships of food and physical activity environments with relevant behaviors and obesity. Available evidence appears to show more consistent evidence of association between built environment characteristics related to physical activity ('walkability' indices, land use mix, variety of transports. . .) with physical activity behavior than with weight status. In contrast, built environment characteristics related to food habits (accessibility to different types of food outlets, availability of healthy foods. . .) would be more consistently associated with weight status than with eating behavior. The need for data from different countries and cultures is emphasized, as much as the importance of transdisciplinary research efforts for translation of these findings into our living environment. Copyright © 2012 Nestec Ltd., Vevey/S. Karger AG, Basel.
ERIC Educational Resources Information Center
Garfield, Joan; Ben-Zvi, Dani
2009-01-01
This article describes a model for an interactive, introductory secondary- or tertiary-level statistics course that is designed to develop students' statistical reasoning. This model is called a "Statistical Reasoning Learning Environment" and is built on the constructivist theory of learning.
U-Access: a web-based system for routing pedestrians of differing abilities
NASA Astrophysics Data System (ADS)
Sobek, Adam D.; Miller, Harvey J.
2006-09-01
For most people, traveling through urban and built environments is straightforward. However, for people with physical disabilities, even a short trip can be difficult and perhaps impossible. This paper provides the design and implementation of a web-based system for the routing and prescriptive analysis of pedestrians with different physical abilities within built environments. U-Access, as a routing tool, provides pedestrians with the shortest feasible route with respect to one of three differing ability levels, namely, peripatetic (unaided mobility), aided mobility (mobility with the help of a cane, walker or crutches) and wheelchair users. U-Access is also an analytical tool that can help identify obstacles in built environments that create routing discrepancies among pedestrians with different physical abilities. This paper discusses the system design, including database, algorithm and interface specifications, and technologies for efficiently delivering results through the World Wide Web (WWW). This paper also provides an illustrative example of a routing problem and an analytical evaluation of the existing infrastructure which identifies the obstacles that pose the greatest discrepancies between physical ability levels. U-Access was evaluated by wheelchair users and route experts from the Center for Disability Services at The University of Utah, USA.
Resilience to urban poverty: theoretical and empirical considerations for population health.
Sanders, Anne E; Lim, Sungwoo; Sohn, Woosung
2008-06-01
To better understand the trajectory that propels people from poverty to poor health, we investigated health resilience longitudinally among African American families with incomes below 250% of the federal poverty level. Health resilience is the capacity to maintain good health in the face of significant adversity. With higher levels of tooth retention as a marker of health resilience, we used a social-epidemiological framework to define capacity for health resilience through a chain of determinants starting in the built environment (housing quality) and community context (social support) to familial influences (religiosity) and individual mental health and health behavior. Odds of retaining 20 or more teeth were 3 times as likely among adults with resilience versus more-vulnerable adults (odds ratio=3.1; 95% confidence interval [CI]=1.3, 7.4). Children of caregivers with resilience had a lower incident rate of noncavitated tooth decay at 18- to 24-month follow-up (incidence risk ratio=0.8; 95% CI=0.7, 0.9) compared with other children. Health resilience to poverty was supported by protective factors in the built and social environments. When poverty itself cannot be eliminated, improving the quality of the built and social environments will foster resilience to its harmful health effects.
Politis, Christopher E; Mowat, David L; Keen, Deb
2017-06-16
The Canadian Partnership Against Cancer funded 12 large-scale knowledge to action cancer and chronic disease prevention projects between 2009 and 2016 through the Coalitions Linking Action and Science for Prevention (CLASP) initiative. Two projects, Healthy Canada by Design (HCBD) and Children's Mobility, Health and Happiness (CMHH), developed policies to address physical activity and the built environment through a multisectoral approach. A qualitative analysis involving a review of 183 knowledge products and 8 key informant interviews was conducted to understand what policy changes occurred, and the underlying critical success factors, through these projects. Both projects worked at the local level to change physical activity and built environment policy in 203 sites, including municipalities and schools. Both projects brought multisectoral expertise (e.g., public health, land use planning, transportation engineering, education, etc.) together to inform the development of local healthy public policy in the areas of land use, transportation and school travel planning. Through the qualitative analysis of the knowledge products and key informant interviews, 163 policies were attributed to HCBD and CMHH work. Fourteen "pathways to policy" were identified as critical success factors facilitating and accelerating the development and implementation of physical activity and built environment policy. Of the 14 pathways to policy, 8 had a focus on multisectoral collaboration. The lessons learned from the CLASP experience could support enhanced multisectoral collaborations to accelerate the development and implementation of physical activity and built environment policy in new jurisdictions across Canada and internationally.
Line segment confidence region-based string matching method for map conflation
NASA Astrophysics Data System (ADS)
Huh, Yong; Yang, Sungchul; Ga, Chillo; Yu, Kiyun; Shi, Wenzhong
2013-04-01
In this paper, a method to detect corresponding point pairs between polygon object pairs with a string matching method based on a confidence region model of a line segment is proposed. The optimal point edit sequence to convert the contour of a target object into that of a reference object was found by the string matching method which minimizes its total error cost, and the corresponding point pairs were derived from the edit sequence. Because a significant amount of apparent positional discrepancies between corresponding objects are caused by spatial uncertainty and their confidence region models of line segments are therefore used in the above matching process, the proposed method obtained a high F-measure for finding matching pairs. We applied this method for built-up area polygon objects in a cadastral map and a topographical map. Regardless of their different mapping and representation rules and spatial uncertainties, the proposed method with a confidence level at 0.95 showed a matching result with an F-measure of 0.894.
BETR North America: A regionally segmented multimedia contaminant fate model for North America
DOE Office of Scientific and Technical Information (OSTI.GOV)
MacLeod, M.; Woodfine, D.G.; Mackay, D.
We present the Berkeley-Trent North American contaminant fate model (BETR North America), a regionally segmented multimedia contaminant fate model based on the fugacity concept. The model is built on a framework that links contaminant fate models of individual regions, and is generally applicable to large, spatially heterogeneous areas. The North American environment is modeled as 24 ecological regions, within each region contaminant fate is described using a 7 compartment multimedia fugacity model including a vertically segmented atmosphere, freshwater, freshwater sediment, soil, coastal water and vegetation compartments. Inter-regional transport of contaminants in the atmosphere, freshwater and coastal water is described usingmore » a database of hydrological and meteorological data compiled with Geographical Information Systems (GIS) techniques. Steady-state and dynamic solutions to the 168 mass balance equations that make up the linked model for North America are discussed, and an illustrative case study of toxaphene transport from the southern United States to the Great Lakes Basin is presented. Regionally segmented models such as BETR North America can provide a critical link between evaluative models of long-range transport potential and contaminant concentrations observed in remote regions. The continent-scale mass balance calculated by the model provides a sound basis for evaluating long-range transport potential of organic pollutants, and formulation of continent scale management and regulatory strategies for chemicals.« less
Roberts, Jennifer D; Knight, Brandon; Ray, Rashawn; Saelens, Brian E
2016-06-01
Previous research identified associations between perceived built environment and adult physical activity; however, fewer studies have explored associations in children. The Built Environment and Active Play (BEAP) Study examined relationships between children's active play and parental perceptions of home neighborhood built environments within the Washington, DC metropolitan area (DMV). With this cross-sectional study, a questionnaire was administered in 2014 to parents of children (7-12 years old) residing in the DMV. Data were collected on children's active play, home built environment parental perceptions, and demographics. Active play response data were dichotomized by whether the child did or did not meet the 60-min/day Physical Activity Guidelines for Americans (PAGAs) recommendation. Perceived home neighborhood built environment data were also dichotomized. Chi-square tests determined differences in parental perceived built environment measures between active and non-active child groups. Logistic regression assessed the association of parental perceived built environment variables with active play while adjusting for demographic variables. The BEAP Study population (n = 144) included a uniquely diverse population of children with 23.7% African Americans and 10.4% Asian Americans. A statistically significant greater proportion of active children's parents agreed with the importance of neighborhood esthetics, active play areas, walkability and safety as compared to the parents of non-active children. Fully adjusted logistic regression models demonstrated that some parental perceived built environment measures (e.g. access to play equipment) were predictors of their children meeting the 60-min/day PAGA recommendation. Our findings support the important role of home neighborhood built environment perceptions on childhood active play.
NASA Astrophysics Data System (ADS)
Nordstrom, Karl F.; Jackson, Nancy L.; Bruno, Michael S.; de Butts, Harry A.
2002-10-01
The characteristics of foredunes created in a municipal management program on a developed barrier island are evaluated to identify how landforms used as protection structures can be natural in appearance and function yet compatible with human values. Shoreline management zones include a naturally evolving, undeveloped segment; a noneroding, developed segment; eroding and noneroding segments of an "improved beach" where dunes have been built by artificial nourishment; and a privately built, artificially nourished dune on the shoreline of an inlet. A disastrous storm in 1962 resulted in an aggressive program for building dunes using sand fences, vegetation plantings, purchase of undeveloped lots, and sediment backpassing to maintain beach widths and dune elevations. The present nourished and shaped foredune in the improved beach is higher, wider, and closer to the berm crest than the natural dune. Restricted inputs of aeolian sand keep the surface flat and poorly vegetated. A stable section of this engineered shore has a wider beach, and sand fences have created a higher foredune with greater topographic diversity. The cross shore zonation of vegetation here is more typical of natural dunes, but the environmental gradient is much narrower. The privately built dune is low, narrow, and located where it could not be created naturally. Foreshore and aeolian sediments in the undeveloped segment and the improved beach are similar in mean grain size (0.16-0.21 mm) and sorting (0.31-0.39 φ), but sediment on the surface of the nourished dune is coarser (28.1% gravel) with a more poorly sorted sand fraction (1.30 φ) representing lag elements on the deflation surface. Willingness to enhance beaches and dunes for protection has reduced insurance premiums and allowed the municipality to qualify for funds from the Federal Emergency Management Agency (FEMA) to replace lost sediment, thus placing an economic value on dunes. Success of the management program is attributed to: (i) timing property-purchase and dune-building programs to periods immediately after storms (causing residents to accept high dunes that restrict access or views); (ii) instituting a vigorous education program (reminding residents of hazards during nonstorm periods); (iii) maintaining control over local sediment supplies (to keep pace with erosion and create new shoreline environments); (iv) investing private and municipal economic resources in landforms (qualifying them for external funds for replacement); and (v) maintaining, augmenting, or simply tolerating biodiversity and natural processes (retaining a natural heritage).
Random forest feature selection approach for image segmentation
NASA Astrophysics Data System (ADS)
Lefkovits, László; Lefkovits, Szidónia; Emerich, Simina; Vaida, Mircea Florin
2017-03-01
In the field of image segmentation, discriminative models have shown promising performance. Generally, every such model begins with the extraction of numerous features from annotated images. Most authors create their discriminative model by using many features without using any selection criteria. A more reliable model can be built by using a framework that selects the important variables, from the point of view of the classification, and eliminates the unimportant once. In this article we present a framework for feature selection and data dimensionality reduction. The methodology is built around the random forest (RF) algorithm and its variable importance evaluation. In order to deal with datasets so large as to be practically unmanageable, we propose an algorithm based on RF that reduces the dimension of the database by eliminating irrelevant features. Furthermore, this framework is applied to optimize our discriminative model for brain tumor segmentation.
Tilley, Sara; Neale, Chris; Patuano, Agnès; Cinderby, Steve
2017-02-04
There are concerns about mental wellbeing in later life in older people as the global population becomes older and more urbanised. Mobility in the built environment has a role to play in improving quality of life and wellbeing, as it facilitates independence and social interaction. Recent studies using neuroimaging methods in environmental psychology research have shown that different types of urban environments may be associated with distinctive patterns of brain activity, suggesting that we interact differently with varying environments. This paper reports on research that explores older people's responses to urban places and their mobility in and around the built environment. The project aim was to understand how older people experience different urban environments using a mixed methods approach including electroencephalography (EEG), self-reported measures, and interview results. We found that older participants experience changing levels of "excitement", "engagement" and "frustration" (as interpreted by proprietary EEG software) whilst walking between a busy built urban environment and an urban green space environment. These changes were further reflected in the qualitative themes that emerged from transcribed interviews undertaken one week post-walk. There has been no research to date that has directly assessed neural responses to an urban environment combined with qualitative interview analysis. A synergy of methods offers a deeper understanding of the changing moods of older people across time whilst walking in city settings.
Hays, Judith C; Davis, Jeffrey A; Miranda, Marie Lynn
2006-01-01
Environmental quality is a leading indicator of population health. Environmental health content has been integrated into the curriculum of an Accelerated Bachelor of Science in Nursing program for second-degree students through development of an environmental health nursing module for the final-semester community health nursing course. The module was developed through collaboration between two professional schools at Duke University (the School of Nursing and the Nicholas School of the Environment and Earth Sciences). It focused on the role of the built environment in community health and featured a mix of teaching strategies, including five components: (1) classroom lecture with associated readings, (2) two rounds of online small-group student discussions, (3) assessment of the built environment in local neighborhoods by student teams, (4) team presentation of the neighborhood assessments, and (5) individual student papers synthesizing the conclusions from all team presentations. The goal of the module was to provide nursing students with an organizing framework for integrating environmental health into clinical practice and an innovative tool for understanding community-level components of public health.
Frontier Homes. Save Our History[TM]. Teacher's Guide.
ERIC Educational Resources Information Center
A&E Network, New York, NY.
This lesson plan, based on the Arts and Entertainment documentary "Frontier Homes," consists of four segments which examine a style of historic dwelling built by settlers on the frontier: the post and beam structures built by English settlers in New England; the log houses constructed by pioneers on the forested frontier; sod houses…
A Village Study with Middle School Spatial Organisation.
ERIC Educational Resources Information Center
Mitchell, El
1985-01-01
Demonstrates how elements of a built environment can be introduced to middle school students. Describes activities that address the concept of spatial organziation in a small scale urban environment, suggesting that hierarchical arrangements of settlements, the central place theory, and land use zoning can be taught at the elementary level. (ML)
Intensifying the proportion of urban green infrastructure has been considered as one of the remedies for air pollution levels in cities, yet the impact of numerous vegetation types deployed in different built environments has to be fully synthesised and quantified. This review ex...
Impact of individual and neighborhood factors on disparities in prostate cancer survival.
DeRouen, Mindy C; Schupp, Clayton W; Koo, Jocelyn; Yang, Juan; Hertz, Andrew; Shariff-Marco, Salma; Cockburn, Myles; Nelson, David O; Ingles, Sue A; John, Esther M; Gomez, Scarlett L
2018-04-01
We addressed the hypothesis that individual-level factors act jointly with social and built environment factors to influence overall survival for men with prostate cancer and contribute to racial/ethnic and socioeconomic (SES) survival disparities. We analyzed multi-level data, combining (1) individual-level data from the California Collaborative Prostate Cancer Study, a population-based study of non-Hispanic White (NHW), Hispanic, and African American prostate cancer cases (N = 1800) diagnosed from 1997 to 2003, with (2) data on neighborhood SES (nSES) and social and built environment factors from the California Neighborhoods Data System, and (3) data on tumor characteristics, treatment and follow-up through 2009 from the California Cancer Registry. Multivariable, stage-stratified Cox proportional hazards regression models with cluster adjustments were used to assess education and nSES main and joint effects on overall survival, before and after adjustment for social and built environment factors. African American men had worse survival than NHW men, which was attenuated by nSES. Increased risk of death was associated with residence in lower SES neighborhoods (quintile 1 (lowest nSES) vs. 5: HR = 1.56, 95% CI: 1.11-2.19) and lower education (
The effect of light rail transit on body mass index and physical activity.
MacDonald, John M; Stokes, Robert J; Cohen, Deborah A; Kofner, Aaron; Ridgeway, Greg K
2010-08-01
The built environment can constrain or facilitate physical activity. Most studies of the health consequences of the built environment face problems of selection bias associated with confounding effects of residential choice and transportation decisions. To examine the cross-sectional associations between objective and perceived measures of the built environment; BMI; obesity (BMI>30 kg/m(2)); and meeting weekly recommended physical activity (RPA) levels through walking and vigorous exercise. To assess the effect of using light rail transit (LRT) system on BMI, obesity, and weekly RPA levels. Data were collected on individuals before (July 2006-February 2007) and after (March 2008-July 2008) completion of an LRT system in Charlotte NC. BMI, obesity, and physical activity levels were calculated for a comparison of these factors pre- and post-LRT construction. A propensity score weighting approach adjusted for differences in baseline characteristics among LRT and non-LRT users. Data were analyzed in 2009. More-positive perceptions of one's neighborhood at baseline were associated with a -0.36 (p<0.05) lower BMI; 15% lower odds (95% CI=0.77, 0.94) of obesity; 9% higher odds (95% CI=0.99, 1.20) of meeting weekly RPA through walking; and 11% higher odds (95% CI=1.01, 1.22) of meeting RPA levels of vigorous exercise. The use of LRT to commute to work was associated with an average -1.18 reduction in BMI (p<0.05) and an 81% reduced odds (95% CI=0.04, 0.92) of becoming obese over time. The results of this study suggest that improving neighborhood environments and increasing the public's use of LRT systems could provide improvements in health outcomes for millions of individuals. 2010 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.
Automatic segmentation of the facial nerve and chorda tympani in pediatric CT scans.
Reda, Fitsum A; Noble, Jack H; Rivas, Alejandro; McRackan, Theodore R; Labadie, Robert F; Dawant, Benoit M
2011-10-01
Cochlear implant surgery is used to implant an electrode array in the cochlea to treat hearing loss. The authors recently introduced a minimally invasive image-guided technique termed percutaneous cochlear implantation. This approach achieves access to the cochlea by drilling a single linear channel from the outer skull into the cochlea via the facial recess, a region bounded by the facial nerve and chorda tympani. To exploit existing methods for computing automatically safe drilling trajectories, the facial nerve and chorda tympani need to be segmented. The goal of this work is to automatically segment the facial nerve and chorda tympani in pediatric CT scans. The authors have proposed an automatic technique to achieve the segmentation task in adult patients that relies on statistical models of the structures. These models contain intensity and shape information along the central axes of both structures. In this work, the authors attempted to use the same method to segment the structures in pediatric scans. However, the authors learned that substantial differences exist between the anatomy of children and that of adults, which led to poor segmentation results when an adult model is used to segment a pediatric volume. Therefore, the authors built a new model for pediatric cases and used it to segment pediatric scans. Once this new model was built, the authors employed the same segmentation method used for adults with algorithm parameters that were optimized for pediatric anatomy. A validation experiment was conducted on 10 CT scans in which manually segmented structures were compared to automatically segmented structures. The mean, standard deviation, median, and maximum segmentation errors were 0.23, 0.17, 0.18, and 1.27 mm, respectively. The results indicate that accurate segmentation of the facial nerve and chorda tympani in pediatric scans is achievable, thus suggesting that safe drilling trajectories can also be computed automatically.
Technology of civil usage of composites. [in commercial aircraft structures
NASA Technical Reports Server (NTRS)
Kemp, D. E.
1977-01-01
The paper deals with the use of advanced composites in structural components of commercial aircraft. The need for testing the response of a material system to service environment is discussed along with methods for evaluating design and manufacturing aspects of a built-up structure under environmental conditions and fail-safe (damage-tolerance) evaluation of structures. Crashworthiness aspects, the fire-hazard potential, and electrical damage of composite structures are considered. Practical operational experience with commercial aircraft is reviewed for boron/epoxy foreflaps, Kevlar/epoxy fillets and fairings, graphite/epoxy spoilers, graphite/polysulfone spoilers, graphite/epoxy floor posts, boron/aluminum aft pylon skin panels, graphite/epoxy engine nose cowl outer barrels, and graphite/epoxy upper aft rudder segments.
NASA Astrophysics Data System (ADS)
Xu, Xiaoqi
Reducing the energy consumed in the built environment is a key objective in many sustainability initiatives. Existing energy saving methods have consisted of physical interventions to buildings and/or behavioral modifications of occupants. However, such methods may not only suffer from their own disadvantages, e.g. high cost and transient effect, but also lose aggregate energy saving potential due to the oftentimes-associated single-building-focused view and an isolated examination of occupant behaviors. This dissertation attempts to overcome the limitations of traditional energy saving research and practical approaches, and enhance residential building energy efficiency and sustainability by proposing innovative energy strategies from a holistic perspective of the aggregate human-environment systems. This holistic perspective features: (1) viewing buildings as mutual influences in the built environment, (2) leveraging both the individual and contextualized social aspects of occupant behaviors, and (3) incorporating interactions between the built environment and human behaviors. First, I integrate three interlinked components: buildings, residents, and the surrounding neighborhood, and quantify the potential energy savings to be gained from renovating buildings at the inter-building level and leveraging neighborhood-contextualized occupant social networks. Following the confirmation of both the inter-building effect among buildings and occupants' interpersonal influence on energy conservation, I extend the research further by examining the synergy that may exist at the intersection between these "engineered" building networks and "social" peer networks, focusing specifically on the additional energy saving potential that could result from interactions between the two components. Finally, I seek to reach an alignment of the human and building environment subsystems by matching the thermostat preferences of each household with the thermal conditions within their apartment, and develop the Energy Saving Alignment Strategy to be considered in public housing assignment policy. This strategy and the inter-building level energy management strategies developed in my preceding research possess large-scale cost-effectiveness and may engender long-lasting influence compared with existing energy saving approaches. Building from the holistic framework of coupled human-environment systems, the findings of this research will advance knowledge of energy efficiency in the built environment and lead to the development of novel strategies to conserve energy in residential buildings.
The built environment and physical activity levels: the Harvard Alumni Health Study.
Lee, I-Min; Ewing, Reid; Sesso, Howard D
2009-10-01
Physical activity is associated with better health, but many individuals are insufficiently active. Modifying the built environment may be an approach capable of influencing population-wide levels of physical activity, but few data exist from longitudinal studies that can minimize bias from active people choosing activity-friendly neighborhoods. This study aims to examine cross-sectional and longitudinal associations between the built environment and physical activity on a large scale. This study examined cross-sectional associations between urban sprawl (mapping addresses to corresponding counties) and physical activity (self-reported) among men throughout the U.S. in 1993 and in 1988, and longitudinal associations between changes in exposure to urban sprawl for movers and physical activity, 1988-1993. Included were 4997 men (mean age, 70 years) in the 1993 cross-sectional study; 4918 men in the 1988 cross-sectional study; and 3448 men in the longitudinal study, 1988-1993. Data were collected prospectively in 1988 and 1993, and analyses were performed in 2007-2008. In cross-sectional analyses, less sprawl was significantly associated with more walking OR, comparing least with most sprawling areas, for meeting physical activity recommendations by walking=1.38 [95% CI=1.09, 1.76] in 1993 and 1.53 [1.19, 1.96] in 1988). Less sprawl also was associated with lower prevalence of overweight (corresponding OR=0.79 [0.64, 0.98] in 1993 and 0.81 [0.66, 1.00] in 1988). However, longitudinal analyses assessing change did not show that decreasing sprawl was associated with increased physical activity or decreased BMI. These findings suggest that the cross-sectional results may reflect self-selection, rather than indicating that the built environment--as measured by urban sprawl--increases physical activity. However, the longitudinal findings were limited by small numbers of men changing residence and associated sprawl levels.
Lee, I-Min; Ewing, Reid; Sesso, Howard D.
2009-01-01
Background Physical activity is associated with better health, but many individuals are insufficiently active. Modifying the built environment may be an approach capable of influencing population-wide levels of physical activity, but few data exist from longitudinal studies that can minimize bias from active persons choosing activity-friendly neighborhoods. This is the first large-scale study to examine longitudinal changes in the built environment and physical activity. Methods This study examined cross-sectional associations between urban sprawl (mapping addresses to corresponding counties) and physical activity (self-reported) among men throughout the US in 1993 and in 1988, and longitudinal associations between changes in exposure to urban sprawl for movers and physical activity, 1988-1993. Included were 4,997 men (mean age, 70 years) in the 1993 cross-sectional study; 4,918 men in the 1988 cross-sectional study; and 3,448 men in the longitudinal study, 1988-1993. Data were collected prospectively in 1988 and 1993, and analyses were performed in 2007-2008. Results In cross-sectional analyses, less sprawl was significantly associated with more walking (odds ratios (OR), comparing least with most sprawling areas, for meeting physical activity recommendations by walking = 1.38 [95% confidence interval = 1.09, 1.76] in 1993 and 1.53 [1.19, 1.96] in 1988). Less sprawl also was associated with lower prevalence of overweight (corresponding OR = 0.79 [0.64, 0.98] in 1993 and 0.81 [0.66-1.00] in 1988). However, longitudinal analyses assessing change did not show that decreasing sprawl was associated with increased physical activity or decreased body mass index. Conclusions These findings suggest that the cross-sectional results may reflect self-selection, rather than indicating that the built environment – as measured by urban sprawl – increases physical activity. However, the longitudinal findings were limited by small numbers of men changing residence and associated sprawl levels. PMID:19765500
Using Green Building As A Model For Making Health Promotion Standard In The Built Environment.
Trowbridge, Matthew J; Worden, Kelly; Pyke, Christopher
2016-11-01
The built environment-the constructed physical parts of the places where people live and work-is a powerful determinant of both individual and population health. Awareness of the link between place and health is growing within the public health sector and among built environment decision makers working in design, construction, policy, and both public and private finance. However, these decision makers lack the knowledge, tools, and capacity to ensure that health and well-being are routinely considered across all sectors of the built environment. The green building industry has successfully established environmental sustainability as a normative part of built environment practice, policy making, and investment. We explore the value of this industry's experience as a template for promoting health and well-being in the built environment. Project HOPE—The People-to-People Health Foundation, Inc.
Heerman, William J; Mitchell, Stephanie J; Thompson, Jessica; Martin, Nina C; Sommer, Evan C; van Bakergem, Margaret; Taylor, Julie Lounds; Buchowski, Maciej S; Barkin, Shari L
2016-11-22
Perception of undesirable features may inhibit built environment use for physical activity among underserved families with children at risk for obesity. To examine the association of perceived availability, condition, and safety of the built environment with its self-reported use for physical activity, we conducted a cross-sectional analysis on baseline data from a randomized controlled trial. Adjusted Poisson regression was used to test the association between the primary independent variables (perceived availability, physical condition, and safety) with the primary outcome of self-reported use of built environment structures. Among 610 parents (90% Latino) of preschool-age children, 158 (26%) reported that there were no available built environment structures for physical activity in the neighborhood. The use of built environment structures was associated with the perceived number of available structures (B = 0.34, 95% CI 0.31, 0.37, p < 0.001) and their perceived condition (B = 0.19, 95% CI 0.12, 0.27, p = 0.001), but not with perceived safety (B = 0.00, 95% CI -0.01, 0.01, p = 0.7). In this sample of underserved families, perceived availability and condition of built environment structures were associated with use rather than perceived safety. To encourage physical activity among underserved families, communities need to invest in the condition and availability of built environment structures. Registered at ClinicalTrials.gov ( NCT01316653 ) on March 11, 2011.
Using built environment characteristics to predict walking for exercise
Lovasi, Gina S; Moudon, Anne V; Pearson, Amber L; Hurvitz, Philip M; Larson, Eric B; Siscovick, David S; Berke, Ethan M; Lumley, Thomas; Psaty, Bruce M
2008-01-01
Background Environments conducive to walking may help people avoid sedentary lifestyles and associated diseases. Recent studies developed walkability models combining several built environment characteristics to optimally predict walking. Developing and testing such models with the same data could lead to overestimating one's ability to predict walking in an independent sample of the population. More accurate estimates of model fit can be obtained by splitting a single study population into training and validation sets (holdout approach) or through developing and evaluating models in different populations. We used these two approaches to test whether built environment characteristics near the home predict walking for exercise. Study participants lived in western Washington State and were adult members of a health maintenance organization. The physical activity data used in this study were collected by telephone interview and were selected for their relevance to cardiovascular disease. In order to limit confounding by prior health conditions, the sample was restricted to participants in good self-reported health and without a documented history of cardiovascular disease. Results For 1,608 participants meeting the inclusion criteria, the mean age was 64 years, 90 percent were white, 37 percent had a college degree, and 62 percent of participants reported that they walked for exercise. Single built environment characteristics, such as residential density or connectivity, did not significantly predict walking for exercise. Regression models using multiple built environment characteristics to predict walking were not successful at predicting walking for exercise in an independent population sample. In the validation set, none of the logistic models had a C-statistic confidence interval excluding the null value of 0.5, and none of the linear models explained more than one percent of the variance in time spent walking for exercise. We did not detect significant differences in walking for exercise among census areas or postal codes, which were used as proxies for neighborhoods. Conclusion None of the built environment characteristics significantly predicted walking for exercise, nor did combinations of these characteristics predict walking for exercise when tested using a holdout approach. These results reflect a lack of neighborhood-level variation in walking for exercise for the population studied. PMID:18312660
Gunn, Lucy Dubrelle; Mavoa, Suzanne; Boulangé, Claire; Hooper, Paula; Kavanagh, Anne; Giles-Corti, Billie
2017-12-04
Evidence-based metrics are needed to inform urban policy to create healthy walkable communities. Most active living research has developed metrics of the environment around residential addresses, ignoring other important walking locations. Therefore, this study examined: metrics for built environment features surrounding local shopping centres, (known in Melbourne, Australia as neighbourhood activity centres (NACs) which are typically anchored by a supermarket); the association between NACs and transport walking; and, policy compliance for supermarket provision. In this observational study, cluster analysis was used to categorize 534 NACs in Melbourne, Australia by their built environment features. The NACS were linked to eligible Victorian Integrated Survey of Travel Activity 2009-2010 (VISTA) survey participants (n=19,984). Adjusted multilevel logistic regressions estimated associations between each cluster typology and two outcomes of daily walking: any transport walking; and, any 'neighbourhood' transport walking. Distance between residential dwellings and closest NAC was assessed to evaluate compliance with local planning policy on supermarket locations. Metrics for 19 built environment features were estimated and three NAC clusters associated with walkability were identified. NACs with significantly higher street connectivity (mean:161, SD:20), destination diversity (mean:16, SD:0.4); and net residential density (mean:77, SD:65) were interpreted as being 'highly walkable' when compared with 'low walkable' NACs, which had lower street connectivity (mean:57, SD:15); destination diversity (mean:11, SD:3); and net residential density (mean:10, SD:3). The odds of any daily transport walking was 5.85 times higher (95% CI: 4.22, 8.11), and for any 'neighborhood' transport walking 8.66 (95% CI: 5.89, 12.72) times higher, for residents whose closest NAC was highly walkable compared with those living near low walkable NACs. Only highly walkable NACs met the policy requirement that residents live within 1km of a local supermarket. Built environment features surrounding NACs must reach certain levels to encourage walking and deliver walkable communities. Research and metrics about the type and quantity of built environment features around both walking trip origins and destinations is needed to inform urban planning policies and urban design guidelines.
Lin, En-Yi; Witten, Karen; Oliver, Melody; Carroll, Penelope; Asiasiga, Lanuola; Badland, Hannah; Parker, Karl
2017-07-01
This study examines aspects of neighbourhood social environments (namely, neighbourhood safety, cohesion and connection) and child-specific built environment attributes in relation to children's independent mobility. The results suggest that children aged 8-13 years with parents who perceive their neighbourhood as more cohesive and more connected, and are located closer to school, engaged in higher levels of independently mobile trips. The qualitative component of this research revealed that for NZ European, Māori, Samoan and other Pacific parents, 'people danger' was the most common concern for letting their children go out alone, whereas for Asian and Indian parents, 'traffic danger' was the most common reason for their concern. Copyright © 2017 Elsevier Ltd. All rights reserved.
Complexity in built environment, health, and destination walking: a neighborhood-scale analysis.
Carlson, Cynthia; Aytur, Semra; Gardner, Kevin; Rogers, Shannon
2012-04-01
This study investigates the relationships between the built environment, the physical attributes of the neighborhood, and the residents' perceptions of those attributes. It focuses on destination walking and self-reported health, and does so at the neighborhood scale. The built environment, in particular sidewalks, road connectivity, and proximity of local destinations, correlates with destination walking, and similarly destination walking correlates with physical health. It was found, however, that the built environment and health metrics may not be simply, directly correlated but rather may be correlated through a series of feedback loops that may regulate risk in different ways in different contexts. In particular, evidence for a feedback loop between physical health and destination walking is observed, as well as separate feedback loops between destination walking and objective metrics of the built environment, and destination walking and perception of the built environment. These feedback loops affect the ability to observe how the built environment correlates with residents' physical health. Previous studies have investigated pieces of these associations, but are potentially missing the more complex relationships present. This study proposes a conceptual model describing complex feedback relationships between destination walking and public health, with the built environment expected to increase or decrease the strength of the feedback loop. Evidence supporting these feedback relationships is presented.
External built residential environment characteristics that affect mental health of adults.
Ochodo, Charles; Ndetei, D M; Moturi, W N; Otieno, J O
2014-10-01
External built residential environment characteristics include aspects of building design such as types of walls, doors and windows, green spaces, density of houses per unit area, and waste disposal facilities. Neighborhoods that are characterized by poor quality external built environment can contribute to psychosocial stress and increase the likelihood of mental health disorders. This study investigated the relationship between characteristics of external built residential environment and mental health disorders in selected residences of Nakuru Municipality, Kenya. External built residential environment characteristics were investigated for 544 residents living in different residential areas that were categorized by their socioeconomic status. Medically validated interview schedules were used to determine mental health of residents in the respective neighborhoods. The relationship between characteristics of the external built residential environment and mental health of residents was determined by multivariable logistic regression analyses and chi-square tests. The results show that walling materials used on buildings, density of dwelling units, state of street lighting, types of doors, states of roofs, and states of windows are some built external residential environment characteristics that affect mental health of adult males and females. Urban residential areas that are characterized by poor quality external built environment substantially expose the population to daily stressors and inconveniences that increase the likelihood of developing mental health disorders.
Jacobs, Silke; Sioen, Isabelle; Pieniak, Zuzanna; De Henauw, Stefaan; Maulvault, Ana Luisa; Reuver, Marieke; Fait, Gabriella; Cano-Sancho, German; Verbeke, Wim
2015-11-01
This research classifies European consumers into segments based on their health risk-benefit perception related to seafood consumption. The profiling variables of these segments are seafood consumption frequency, general attitude toward consuming fish, confidence in control organizations, attitude toward the marine environment, environmental concern and socio-demographics. A web-based survey was performed in one western European country (Belgium), one northern European country (Ireland) and three southern European countries (Italy, Portugal and Spain), resulting in a total sample of 2824 participants. A cluster analysis was performed based on risk-benefit perception related to seafood and the profiles of the segments were determined by a robust 2-way ANOVA analysis accounting for country effects. Although this study confirms consumers' positive image of consuming seafood, gradients are found in health risk-benefit perception related to seafood consumption. Seafood consumption frequency is mainly determined by country-related traditions and habits related to seafood rather than by risk-benefit perceptions. Segments with a higher benefit perception, irrespective of their level of risk perception, show a more positive attitude toward consuming seafood and toward the marine environment; moreover, they report a higher concern about the marine environment and have a higher involvement with seafood and with the marine environment. Consequently, information campaigns concentrating on pro-environmental behavior are recommended to raise the involvement with seafood and the marine environment as this is associated with a higher environmental concern. This research underpins that in such information campaigns a nationally differentiated rather than a pan-European or international information strategy should be aimed for because of significant cultural differences between the identified segments. Copyright © 2015. Published by Elsevier Inc.
Troped, Philip J; Tamura, Kosuke; McDonough, Meghan H; Starnes, Heather A; James, Peter; Ben-Joseph, Eran; Cromley, Ellen; Puett, Robin; Melly, Steven J; Laden, Francine
2017-04-01
The built environment predicts walking in older adults, but the degree to which associations between the objective built environment and walking for different purposes are mediated by environmental perceptions is unknown. We examined associations between the neighborhood built environment and leisure and utilitarian walking and mediation by the perceived environment among older women. Women (N = 2732, M age = 72.8 ± 6.8 years) from Massachusetts, Pennsylvania, and California completed a neighborhood built environment and walking survey. Objective population and intersection density and density of stores and services variables were created within residential buffers. Perceived built environment variables included measures of land use mix, street connectivity, infrastructure for walking, esthetics, traffic safety, and personal safety. Regression and bootstrapping were used to test associations and indirect effects. Objective population, stores/services, and intersection density indirectly predicted leisure and utilitarian walking via perceived land use mix (odds ratios (ORs) = 1.01-1.08, 95 % bias corrected and accelerated confidence intervals do not include 1). Objective density of stores/services directly predicted ≥150 min utilitarian walking (OR = 1.11; 95% CI = 1.02, 1.22). Perceived land use mix (ORs = 1.16-1.44) and esthetics (ORs = 1.24-1.61) significantly predicted leisure and utilitarian walking, CONCLUSIONS: Perceived built environment mediated associations between objective built environment variables and walking for leisure and utilitarian purposes. Interventions for older adults should take into account how objective built environment characteristics may influence environmental perceptions and walking.
Anåker, Anna; von Koch, Lena; Sjöstrand, Christina; Heylighen, Ann; Elf, Marie
2018-04-20
To explore and compare the impact of the physical environment on patients' activities and care at three newly built stroke units. Receiving care in a stroke unit instead of in a general ward reduces the odds of death, dependency and institutionalized care. In stroke units, the design of the physical environment should support evidence-based care. Studies on patients' activities in relation to the design of the physical environment of stroke units are scarce. This work is a comparative descriptive case study. Patients (N = 55) who had a confirmed diagnosis of stroke were recruited from three newly built stroke units in Sweden. The units were examined by non-participant observation using two types of data collection: behavioural mapping analysed with descriptive statistics and field note taking analysed with deductive content analysis. Data were collected from April 2013 - December 2015. The units differed in the patients' levels of physical activity, the proportion of the day that patients spent with health professionals and family presence. Patients were more physically active in a unit with a combination of single and multi-bed room designs than in a unit with an entirely single-room design. Stroke units that were easy to navigate and offered variations in the physical environment had an impact on patients' activities and care. Patients' activity levels and interactions appeared to vary with the design of the physical environments of stroke units. Stroke guidelines focused on health status assessments, avoidance of bed-rest and early rehabilitation require a supportive physical environment. © 2018 The Authors. Journal of Advanced Nursing Published by John Wiley & Sons Ltd.
Tools for estimating VMT reductions from built environment changes.
DOT National Transportation Integrated Search
2013-06-01
Built environment characteristics are associated with walking, bicycling, transit use, and vehicle : miles traveled (VMT). Developing built environments supportive of walking, bicycling, and transit use : can help meet state VMT reduction goals. But ...
Automated diagnosis of interstitial lung diseases and emphysema in MDCT imaging
NASA Astrophysics Data System (ADS)
Fetita, Catalin; Chang Chien, Kuang-Che; Brillet, Pierre-Yves; Prêteux, Françoise
2007-09-01
Diffuse lung diseases (DLD) include a heterogeneous group of non-neoplasic disease resulting from damage to the lung parenchyma by varying patterns of inflammation. Characterization and quantification of DLD severity using MDCT, mainly in interstitial lung diseases and emphysema, is an important issue in clinical research for the evaluation of new therapies. This paper develops a 3D automated approach for detection and diagnosis of diffuse lung diseases such as fibrosis/honeycombing, ground glass and emphysema. The proposed methodology combines multi-resolution 3D morphological filtering (exploiting the sup-constrained connection cost operator) and graph-based classification for a full characterization of the parenchymal tissue. The morphological filtering performs a multi-level segmentation of the low- and medium-attenuated lung regions as well as their classification with respect to a granularity criterion (multi-resolution analysis). The original intensity range of the CT data volume is thus reduced in the segmented data to a number of levels equal to the resolution depth used (generally ten levels). The specificity of such morphological filtering is to extract tissue patterns locally contrasting with their neighborhood and of size inferior to the resolution depth, while preserving their original shape. A multi-valued hierarchical graph describing the segmentation result is built-up according to the resolution level and the adjacency of the different segmented components. The graph nodes are then enriched with the textural information carried out by their associated components. A graph analysis-reorganization based on the nodes attributes delivers the final classification of the lung parenchyma in normal and ILD/emphysematous regions. It also makes possible to discriminate between different types, or development stages, among the same class of diseases.
Multi-Feature Based Information Extraction of Urban Green Space Along Road
NASA Astrophysics Data System (ADS)
Zhao, H. H.; Guan, H. Y.
2018-04-01
Green space along road of QuickBird image was studied in this paper based on multi-feature-marks in frequency domain. The magnitude spectrum of green along road was analysed, and the recognition marks of the tonal feature, contour feature and the road were built up by the distribution of frequency channels. Gabor filters in frequency domain were used to detect the features based on the recognition marks built up. The detected features were combined as the multi-feature-marks, and watershed based image segmentation were conducted to complete the extraction of green space along roads. The segmentation results were evaluated by Fmeasure with P = 0.7605, R = 0.7639, F = 0.7622.
Resilience to Urban Poverty: Theoretical and Empirical Considerations for Population Health
Sanders, Anne E.; Lim, Sungwoo; Sohn, Woosung
2008-01-01
Objectives. To better understand the trajectory that propels people from poverty to poor health, we investigated health resilience longitudinally among African American families with incomes below 250% of the federal poverty level. Methods. Health resilience is the capacity to maintain good health in the face of significant adversity. With higher levels of tooth retention as a marker of health resilience, we used a social–epidemiological framework to define capacity for health resilience through a chain of determinants starting in the built environment (housing quality) and community context (social support) to familial influences (religiosity) and individual mental health and health behavior. Results. Odds of retaining 20 or more teeth were 3 times as likely among adults with resilience versus more-vulnerable adults (odds ratio=3.1; 95% confidence interval [CI]=1.3, 7.4). Children of caregivers with resilience had a lower incident rate of noncavitated tooth decay at 18- to 24-month follow-up (incidence risk ratio=0.8; 95% CI=0.7, 0.9) compared with other children. Conclusions. Health resilience to poverty was supported by protective factors in the built and social environments. When poverty itself cannot be eliminated, improving the quality of the built and social environments will foster resilience to its harmful health effects. PMID:18445798
Built Environment Education in Art Education.
ERIC Educational Resources Information Center
Guilfoil, Joanne K., Ed.; Sandler, Alan R., Ed.
This anthology brings the study of the built environment, its design, social and cultural functions, and the criticism thereof into focus. Following a preface and introduction, 22 essays are organized in three parts. Part 1 includes: (1) "Landscape Art and the Role of the Natural Environment in Built Environment Education" (Heather…
Xiao, X; Bai, B; Xu, N; Wu, K
2015-04-01
Oversegmentation is a major drawback of the morphological watershed algorithm. Here, we study and reveal that the oversegmentation is not only because of the irregular shapes of the particle images, which people are familiar with, but also because of some particles, such as ellipses, with more than one centre. A new parameter, the striping level, is introduced and the criterion for striping parameter is built to help find the right markers prior to segmentation. An adaptive striping watershed algorithm is established by applying a procedure, called the marker searching algorithm, to find the markers, which can effectively suppress the oversegmentation. The effectiveness of the proposed method is validated by analysing some typical particle images including the images of gold nanorod ensembles. © 2014 The Authors Journal of Microscopy © 2014 Royal Microscopical Society.
Semantic Segmentation of Forest Stands of Pure Species as a Global Optimization Problem
NASA Astrophysics Data System (ADS)
Dechesne, C.; Mallet, C.; Le Bris, A.; Gouet-Brunet, V.
2017-05-01
Forest stand delineation is a fundamental task for forest management purposes, that is still mainly manually performed through visual inspection of geospatial (very) high spatial resolution images. Stand detection has been barely addressed in the literature which has mainly focused, in forested environments, on individual tree extraction and tree species classification. From a methodological point of view, stand detection can be considered as a semantic segmentation problem. It offers two advantages. First, one can retrieve the dominant tree species per segment. Secondly, one can benefit from existing low-level tree species label maps from the literature as a basis for high-level object extraction. Thus, the semantic segmentation issue becomes a regularization issue in a weakly structured environment and can be formulated in an energetical framework. This papers aims at investigating which regularization strategies of the literature are the most adapted to delineate and classify forest stands of pure species. Both airborne lidar point clouds and multispectral very high spatial resolution images are integrated for that purpose. The local methods (such as filtering and probabilistic relaxation) are not adapted for such problem since the increase of the classification accuracy is below 5%. The global methods, based on an energy model, tend to be more efficient with an accuracy gain up to 15%. The segmentation results using such models have an accuracy ranging from 96% to 99%.
Shariff-Marco, Salma; Von Behren, Julie; Reynolds, Peggy; Keegan, Theresa H. M.; Hertz, Andrew; Kwan, Marilyn L.; Roh, Janise M.; Thomsen, Catherine; Kroenke, Candyce H.; Ambrosone, Christine; Kushi, Lawrence H.; Gomez, Scarlett Lin
2017-01-01
Background As social and built environment factors have been shown to be associated with physical activity, dietary patterns, and obesity in the general population, they likely also influence these health behaviors among cancer survivors, and thereby impact survivorship outcomes. Methods Enhancing the rich, individual-level survey and medical record data from 4,505 breast cancer survivors in the Pathways Study, a prospective cohort drawn from Kaiser Permanente Northern California, we geocoded baseline residential addresses and appended social and built environment data. With multinomial logistic models, we examined associations between neighborhood characteristics and body mass index and whether neighborhood factors explained racial/ethnic/nativity disparities in overweight/obesity. Results Low neighborhood socioeconomic status, high minority composition, high traffic density, high prevalence of commuting by car, and a higher number of fast food restaurants were independently associated with higher odds of overweight or obesity. The higher odds of overweight among African Americans, US-born Asian Americans/Pacific Islanders and foreign-born Hispanics and the higher odds of obesity among African Americans and US-born Hispanics, compared to non-Hispanic Whites, remained significant though somewhat attenuated when accounting for social and built environment features. Conclusions Addressing aspects of neighborhood environments may help breast cancer survivors maintain a healthy body weight. Impact Further research in this area, such as incorporating data on individuals’ perceptions and use of their neighborhood environments, is needed to ultimately inform multilevel interventions that would ameliorate such disparities and improve outcomes for breast cancer survivors, regardless of their social status (e.g., race/ethnicity, socioeconomic status, nativity). PMID:28154107
Perez, Lilian G; Conway, Terry L; Bauman, Adrian; Kerr, Jacqueline; Elder, John P; Arredondo, Elva M; Sallis, James F
2018-01-01
Associations between the built environment and physical activity (PA) may vary by sociodemographic factors. However, such evidence from international studies is limited. This study tested the moderating effects of sociodemographic factors on associations between perceived environment and self-reported total PA among adults from the International Prevalence Study. Between 2002 and 2003, adults from 9 countries (N = 10,258) completed surveys assessing total PA (International Physical Activity Questionnaire-short), perceived environment, and sociodemographics (age, gender, and education). Total PA was dichotomized as meeting/not meeting (a) high PA levels and (b) minimum PA guidelines. Logistic models tested environment by sociodemographic interactions (24 total). Education and gender moderated the association between safety from crime and meeting high PA levels (interaction P < .05), with inverse associations found only among the high education group and men. Education and gender also moderated associations of safety from crime and the presence of transit stops with meeting minimum PA guidelines (interaction P < .05), with positive associations found for safety from crime only among women and presence of transit stops only among men and the high education group. The limited number of moderating effects found provides support for population-wide environment-PA associations. International efforts to improve built environments are needed to promote health-enhancing PA and maintain environmental sustainability.
NASA Astrophysics Data System (ADS)
Bianco, M.; Martoiu, S.; Sidiropoulou, O.; Zibell, A.
2015-12-01
A Micromegas (MM) quadruplet prototype with an active area of 0.5 m2 that adopts the general design foreseen for the upgrade of the innermost forward muon tracking systems (Small Wheels) of the ATLAS detector in 2018-2019, has been built at CERN and is going to be tested in the ATLAS cavern environment during the LHC RUN-II period 2015-2017. The integration of this prototype detector into the ATLAS data acquisition system using custom ATCA equipment is presented. An ATLAS compatible Read Out Driver (ROD) based on the Scalable Readout System (SRS), the Scalable Readout Unit (SRU), will be used in order to transmit the data after generating valid event fragments to the high-level Read Out System (ROS). The SRU will be synchronized with the LHC bunch crossing clock (40.08 MHz) and will receive the Level-1 trigger signals from the Central Trigger Processor (CTP) through the TTCrx receiver ASIC. The configuration of the system will be driven directly from the ATLAS Run Control System. By using the ATLAS TDAQ Software, a dedicated Micromegas segment has been implemented, in order to include the detector inside the main ATLAS DAQ partition. A full set of tests, on the hardware and software aspects, is presented.
Oreskovic, Nicolas M; Goodman, Elizabeth; Park, Elyse R; Robinson, Alyssa I; Winickoff, Jonathan P
2015-01-01
Adequate physical activity promotes physical and mental health and decreases obesity risk. However, most adolescents do not attain recommended physical activity levels and effective interventions are lacking. Physical activity trials rarely incorporate built environment use patterns. This paper describes the design and rationale of the Children's Use of the Built Environment (CUBE) Study, an office-based intervention designed to teach youth how to use their surrounding built environment to increase physical activity. CUBE is a 6-month intervention trial among 60 overweight and obese 10-16 year old adolescents from a community health center in Massachusetts. The study began in the winter of 2013. Patients are sequentially assigned to either the intervention or control group. Baseline physical activity by accelerometry and location by GPS, along with measured height, weight, and blood pressure are collected. Control subjects receive standard of care lifestyle counseling. Intervention subjects receive tailored recommendations on how to increase their physical activity based on their accelerometer and GPS data. Data collections are repeated at end-of-treatment, and again 3 months later. The findings from this study should help guide future efforts to design interventions aimed at increasing adolescent physical activity as well as to inform design professionals and government officials charged with creating outdoor spaces where adolescents spend time. Copyright © 2014 Elsevier Inc. All rights reserved.
Burns, Paul A.; Snow, Rachel C.
2012-01-01
Youth sexual risk behavior is often described in social terms, and there has been limited attention to date on how measures of the built environment, including access to municipal services, impact sexual risk behavior, particularly in resource-limited countries. Using the Cape Area Panel Study, we assessed the impact of neighborhood conditions (six single items and a built environment index (BEI)), net of individual socio-demographic factors. The results suggest that built environment factors are associated with sexual risk behavior. Also, the magnitude of associations between built environment factors and sexual risk behavior was more pronounced for females than for males. PMID:22704913
Compact development and VMT: environmental determinism, self-selection, or some of both?
Ewing, Reid; Hamidi, Shima; Grace, James B.
2016-01-01
There is a long-running debate in the planning literature about the effects of the built environment on travel behavior and the degree to which apparent effects are due to the tendency of households to self-select into neighborhoods that reinforce their travel preferences. Those who want to walk will choose walkable neighborhoods, and those who want to use transit will choose transit-served neighborhoods. These households might have walked or used transit more than their neighbors wherever they lived. Most previous studies have shown that individual attitudes attenuate the relationship between the residential environment and travel choices, and so the effect of the built environment on travel may be overestimated. But there are other researchers who argue the reverse, claiming that residential preferences reinforce built environmental influences. This study assesses the relative importance of the built environment and residential preferences/travel attitudes for a sample of 962 households in the Greater Salt Lake region using structural equation modeling. For the sake of simplicity, we extracted two factors using principal component analysis, one representing the built environment and the other representing residential preferences/attitudes. Our findings are consistent with the view that the neighborhood built environment and residential preferences both influence household’s travel, that the built environment is the stronger influence, and that the built environment affects travel through two causal pathways, one direct and the other indirect, through attitudes.
Tilley, Sara; Neale, Chris; Patuano, Agnès; Cinderby, Steve
2017-01-01
There are concerns about mental wellbeing in later life in older people as the global population becomes older and more urbanised. Mobility in the built environment has a role to play in improving quality of life and wellbeing, as it facilitates independence and social interaction. Recent studies using neuroimaging methods in environmental psychology research have shown that different types of urban environments may be associated with distinctive patterns of brain activity, suggesting that we interact differently with varying environments. This paper reports on research that explores older people’s responses to urban places and their mobility in and around the built environment. The project aim was to understand how older people experience different urban environments using a mixed methods approach including electroencephalography (EEG), self-reported measures, and interview results. We found that older participants experience changing levels of “excitement”, “engagement” and “frustration” (as interpreted by proprietary EEG software) whilst walking between a busy built urban environment and an urban green space environment. These changes were further reflected in the qualitative themes that emerged from transcribed interviews undertaken one week post-walk. There has been no research to date that has directly assessed neural responses to an urban environment combined with qualitative interview analysis. A synergy of methods offers a deeper understanding of the changing moods of older people across time whilst walking in city settings. PMID:28165409
A binary link tracker for the BaBar level 1 trigger system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Berenyi, A.; Chen, H.K.; Dao, K.
1999-08-01
The BaBar detector at PEP-II will operate in a high-luminosity e{sup +}e{sup {minus}} collider environment near the {Upsilon}(4S) resonance with the primary goal of studying CP violation in the B meson system. In this environment, typical physics events of interest involve multiple charged particles. These events are identified by counting these tracks in a fast first level (Level 1) trigger system, by reconstructing the tracks in real time. For this purpose, a Binary Link Tracker Module (BLTM) was designed and fabricated for the BaBar Level 1 Drift Chamber trigger system. The BLTM is responsible for linking track segments, constructed bymore » the Track Segment Finder Modules (TSFM), into complete tracks. A single BLTM module processes a 360 MBytes/s stream of segment hit data, corresponding to information from the entire Drift Chamber, and implements a fast and robust algorithm that tolerates high hit occupancies as well as local inefficiencies of the Drift Chamber. The algorithms and the necessary control logic of the BLTM were implemented in Field Programmable Gate Arrays (FPGAs), using the VHDL hardware description language. The finished 9U x 400 mm Euro-format board contains roughly 75,000 gates of programmable logic or about 10,000 lines of VHDL code synthesized into five FPGAs.« less
2011-01-01
Background Empirical evidence suggests that an association between the built environment and physical activity exists. This evidence is mostly derived from cross-sectional studies that do not account for other causal explanations such as neighborhood self-selection. Experimental and quasi-experimental designs can be used to isolate the effect of the built environment on physical activity, but in their absence, statistical techniques that adjust for neighborhood self-selection can be used with cross-sectional data. Previous reviews examining the built environment-physical activity relationship have not differentiated among findings based on study design. To deal with self-selection, we synthesized evidence regarding the relationship between objective measures of the built environment and physical activity by including in our review: 1) cross-sectional studies that adjust for neighborhood self-selection and 2) quasi-experiments. Method In September 2010, we searched for English-language studies on built environments and physical activity from all available years in health, leisure, transportation, social sciences, and geographical databases. Twenty cross-sectional and 13 quasi-experimental studies published between 1996 and 2010 were included in the review. Results Most associations between the built environment and physical activity were in the expected direction or null. Land use mix, connectivity and population density and overall neighborhood design were however, important determinants of physical activity. The built environment was more likely to be associated with transportation walking compared with other types of physical activity including recreational walking. Three studies found an attenuation in associations between built environment characteristics and physical activity after accounting for neighborhood self-selection. Conclusion More quasi-experiments that examine a broader range of environmental attributes in relation to context-specific physical activity and that measure changes in the built environment, neighborhood preferences and their effect on physical activity are needed. PMID:22077952
Smith, Melody; Hosking, Jamie; Woodward, Alistair; Witten, Karen; MacMillan, Alexandra; Field, Adrian; Baas, Peter; Mackie, Hamish
2017-11-16
Evidence is mounting to suggest a causal relationship between the built environment and people's physical activity behaviours, particularly active transport. The evidence base has been hindered to date by restricted consideration of cost and economic factors associated with built environment interventions, investigation of socioeconomic or ethnic differences in intervention effects, and an inability to isolate the effect of the built environment from other intervention types. The aims of this systematic review were to identify which environmental interventions increase physical activity in residents at the local level, and to build on the evidence base by considering intervention cost, and the differential effects of interventions by ethnicity and socioeconomic status. A systematic database search was conducted in June 2015. Articles were eligible if they reported a quantitative empirical study (natural experiment or a prospective, retrospective, experimental, or longitudinal research) investigating the relationship between objectively measured built environment feature(s) and physical activity and/or travel behaviours in children or adults. Quality assessment was conducted and data on intervention cost and whether the effect of the built environment differed by ethnicity or socioeconomic status were extracted. Twenty-eight studies were included in the review. Findings showed a positive effect of walkability components, provision of quality parks and playgrounds, and installation of or improvements in active transport infrastructure on active transport, physical activity, and visits or use of settings. There was some indication that infrastructure improvements may predominantly benefit socioeconomically advantaged groups. Studies were commonly limited by selection bias and insufficient controlling for confounders. Heterogeneity in study design and reporting limited comparability across studies or any clear conclusions to be made regarding intervention cost. Improving neighbourhood walkability, quality of parks and playgrounds, and providing adequate active transport infrastructure is likely to generate positive impacts on activity in children and adults. The possibility that the benefits of infrastructure improvements may be inequitably distributed requires further investigation. Opportunities to improve the quality of evidence exist, including strategies to improve response rates and representativeness, use of valid and reliable measurement tools, cost-benefit analyses, and adequate controlling for confounders.
Perceived Built Environment and Physical Activity in U.S. Women by Sprawl and Region
Troped, Philip J.; Tamura, Kosuke; Whitcomb, Heather A.; Laden, Francine
2012-01-01
Background A number of studies have demonstrated relationships between the perceived built environment and physical activity among adults. However, little is known about whether these associations differ by U.S. region and level of urban sprawl. Purpose To examine associations between the perceived built environment and physical activity in U.S. women by region and urban sprawl. Methods Nurses’ Health Study II participants (N = 68,968) completed four perceived neighborhood environment survey items in 2005. Logistic regression was used to estimate associations with meeting physical activity recommendations, adjusting for demographic and weight-status variables, and stratifying by region and sprawl. Data analyses were completed in 2011. Results Perceived proximity to shops/stores was positively associated with physical activity across regions and levels of sprawl (ORs = 1.21 to 1.46). Perceived access to recreation facilities was also a positive physical activity correlate in most region–sprawl strata with strongest relationships found in the West (ORs = 1.31 to 1.70). Perceived crime and presence of sidewalks did not show statistically significant associations with physical activity in most region–sprawl strata, although ORs for perceived crime showed a consistent pattern of negative associations (ORs from 0.60 to 0.95). A higher number of positive environmental attributes was associated with a greater odds of meeting physical activity recommendations. Conclusions Findings indicate that perceived proximity to shops/stores and access to recreation facilities are important correlates of physical activity for women, irrespective of region or sprawl. PMID:22011417
Christiansen, Lars B; Cerin, Ester; Badland, Hannah; Kerr, Jacqueline; Davey, Rachel; Troelsen, Jens; van Dyck, Delfien; Mitáš, Josef; Schofield, Grant; Sugiyama, Takemi; Salvo, Deborah; Sarmiento, Olga L; Reis, Rodrigo; Adams, Marc; Frank, Larry; Sallis, James F
2016-12-01
Mounting evidence documents the importance of urban form for active travel, but international studies could strengthen the evidence. The aim of the study was to document the strength, shape, and generalizability of relations of objectively measured built environment variables with transport-related walking and cycling. This cross-sectional study maximized variation of environments and demographics by including multiple countries and by selecting adult participants living in neighborhoods based on higher and lower classifications of objectively measured walkability and socioeconomic status. Analyses were conducted on 12,181 adults aged 18-66 years, drawn from 14 cities across 10 countries worldwide. Frequency of transport-related walking and cycling over the last seven days was assessed by questionnaire and four objectively measured built environment variables were calculated. Associations of built environment variables with transport-related walking and cycling variables were estimated using generalized additive mixed models, and were tested for curvilinearity and study site moderation. We found positive associations of walking for transport with all the environmental attributes, but also found that the relationships was only linear for land use mix, but not for residential density, intersection density, and the number of parks. Our findings suggest that there may be optimum values in these attributes, beyond which higher densities or number of parks could have minor or even negative impact. Cycling for transport was associated linearly with residential density, intersection density (only for any cycling), and land use mix, but not with the number of parks. Across 14 diverse cities and countries, living in more densely populated areas, having a well-connected street network, more diverse land uses, and having more parks were positively associated with transport-related walking and/or cycling. Except for land-use-mix, all built environment variables had curvilinear relationships with walking, with a plateau in the relationship at higher levels of the scales.
Christiansen, Lars B.; Cerin, Ester; Badland, Hannah; Kerr, Jacqueline; Davey, Rachel; Troelsen, Jens; van Dyck, Delfien; Mitáš, Josef; Schofield, Grant; Sugiyama, Takemi; Salvo, Deborah; Sarmiento, Olga L.; Reis, Rodrigo; Adams, Marc; Frank, Larry; Sallis, James F.
2016-01-01
Introduction Mounting evidence documents the importance of urban form for active travel, but international studies could strengthen the evidence. The aim of the study was to document the strength, shape, and generalizability of relations of objectively measured built environment variables with transport-related walking and cycling. Methods This cross-sectional study maximized variation of environments and demographics by including multiple countries and by selecting adult participants living in neighborhoods based on higher and lower classifications of objectively measured walkability and socioeconomic status. Analyses were conducted on 12,181 adults aged 18–66 years, drawn from 14 cities across 10 countries worldwide. Frequency of transport-related walking and cycling over the last seven days was assessed by questionnaire and four objectively measured built environment variables were calculated. Associations of built environment variables with transport-related walking and cycling variables were estimated using generalized additive mixed models, and were tested for curvilinearity and study site moderation. Results We found positive associations of walking for transport with all the environmental attributes, but also found that the relationships was only linear for land use mix, but not for residential density, intersection density, and the number of parks. Our findings suggest that there may be optimum values in these attributes, beyond which higher densities or number of parks could have minor or even negative impact. Cycling for transport was associated linearly with residential density, intersection density (only for any cycling), and land use mix, but not with the number of parks. Conclusion Across 14 diverse cities and countries, living in more densely populated areas, having a well-connected street network, more diverse land uses, and having more parks were positively associated with transport-related walking and/or cycling. Except for land-use-mix, all built environment variables had curvilinear relationships with walking, with a plateau in the relationship at higher levels of the scales. PMID:28111613
Jansen, Marijke; Ettema, Dick; Pierik, Frank; Dijst, Martin
2016-03-04
Physical activity (PA) is influenced by the built environment. However, little is known about the types of built environment where adults spend their time, and at what levels of PA they engage in those environments. Understanding the effect of the built environment on PA requires insight into PA behavior at different types of locations (e.g., home, work, shopping centers, and sports facilities). Therefore, this study describes where adults aged 45-65 years were active with moderate-to-vigorous intensity (MVPA), and examines associations of socio-demographic factors and neighborhood with MVPA at these locations. Participants' (N = 308) PA was measured for seven days using accelerometers and GPS-devices. Adults spent most minutes of MVPA at home and work. Highest MVPA-ratios of total time spent at a location were achieved in sports facilities and during transport. Neighborhood characteristics and socio-demographic factors such as work status, health status and household structure, had significant effects on MVPA at various locations and on total MVPA. Understanding PA behavior at various locations may provide insights that allow professionals in different domains (e.g., health, landscaping, urban planning) to develop strategies to stimulate PA.
Jansen, Marijke; Ettema, Dick; Pierik, Frank; Dijst, Martin
2016-01-01
Physical activity (PA) is influenced by the built environment. However, little is known about the types of built environment where adults spend their time, and at what levels of PA they engage in those environments. Understanding the effect of the built environment on PA requires insight into PA behavior at different types of locations (e.g., home, work, shopping centers, and sports facilities). Therefore, this study describes where adults aged 45–65 years were active with moderate-to-vigorous intensity (MVPA), and examines associations of socio-demographic factors and neighborhood with MVPA at these locations. Participants’ (N = 308) PA was measured for seven days using accelerometers and GPS-devices. Adults spent most minutes of MVPA at home and work. Highest MVPA-ratios of total time spent at a location were achieved in sports facilities and during transport. Neighborhood characteristics and socio-demographic factors such as work status, health status and household structure, had significant effects on MVPA at various locations and on total MVPA. Understanding PA behavior at various locations may provide insights that allow professionals in different domains (e.g., health, landscaping, urban planning) to develop strategies to stimulate PA. PMID:26959041
Berke, Ethan M; Vernez-Moudon, Anne
2014-06-01
As research examining the effect of the built environment on health accelerates, it is critical for health and planning researchers to conduct studies and make recommendations in the context of a robust theoretical framework. We propose a framework for built environment change (BEC) related to improving health. BEC consists of elements of the built environment, how people are exposed to and interact with them perceptually and functionally, and how this exposure may affect health-related behaviours. Integrated into this framework are the legal and regulatory mechanisms and instruments that are commonly used to effect change in the built environment. This framework would be applicable to medical research as well as to issues of policy and community planning.
NASA Astrophysics Data System (ADS)
Wasilah, S.; Fahmyddin, T.
2018-03-01
The employment of structural equation modeling (SEM) in research has taken an increasing attention in among researchers in built environment. There is a gap to understand the attributes, application, and importance of this approach in data analysis in built environment study. This paper intends to provide fundamental comprehension of SEM method in data analysis, unveiling attributes, employment and significance and bestow cases to assess associations amongst variables and constructs. The study uses some main literature to grasp the essence of SEM regarding with built environment research. The better acknowledgment of this analytical tool may assist the researcher in the built environment to analyze data under complex research questions and to test multivariate models in a single study.
Overview of ergonomics built environment.
Costa, Ana Paula Lima; Campos, Fábio; Villarouco, Vilma
2012-01-01
This article provides an overview of academic research in the scientific discipline of ergonomics in the context of the built environment, from data collected from journals, conferences and research groups whose focus is the theme of the Ergonomics of Built Environment. Starting from the context of the Ergonomics of Built Environment, it identifies the broadcast media who publish work in this area and its scientific production, seeking to recover from the first published papers to the production of the most recent scientific journals and conferences to be launched 2010. From this mapping, we identified the major outstanding and open issues in these studies, outlining the state of the art Ergonomics Built Environment, in order to inform those interested and intend to develop scientific research in this field.
Adams, Marc A; Ryan, Sherry; Kerr, Jacqueline; Sallis, James F; Patrick, Kevin; Frank, Lawrence D; Norman, Gregory J
2009-01-01
Concurrent validity of Neighborhood Environment Walkability Scale (NEWS) items was evaluated with objective measures of the built environment using geographic information systems (GIS). A sample of 878 parents of children 10 to 16 years old (mean age 43.5 years, SD = 6.8, 34.8% non-White, 63.8% overweight) completed NEWS and the International Physical Activity Questionnaire. GIS was used to develop 1-mile street network buffers around participants' residences. GIS measures of the built environment within participants' buffers included percent of commercial and institutional land uses; number of schools and colleges, recreational facilities, parks, transit stops, and trees; land topography; and traffic congestion. Except for trees and traffic, concordance between the NEWS and GIS measures were significant, with weak to moderate effect sizes (r = -0.09 to -0.36, all P < or = 01). After participants were stratified by physical activity level, stronger concordance was observed among active participants for some measures. A sensitivity analysis of self-reported distance to 15 neighborhood destinations found a 20-minute (compared with 10- or 30-minute) walking threshold generally had the strongest correlations with GIS measures. These findings provide evidence of the concurrent validity of self-reported built environment items with objective measures. Physically active adults may be more knowledgeable about their neighborhood characteristics.
The effects of signage and the physical environment on stair usage.
Bungum, Tim; Meacham, Mindy; Truax, Nicole
2007-07-01
Physical activity (PA) is a health behavior that most Americans do not participate in at recommended levels. We sought to increase PA by use of motivational signs in selected buildings. Because physical environments are known to influence PA, the relationship of building characteristics and stair usage was also assessed. One pre- and two post-intervention observations were conducted. The proportion of those using the stairs increased from baseline to the second data collection, (chi2 = 39.31, p < 0.01) and baseline to a final data collection (chi2 = 10.1, p < 0.01). Built environment factors, including steps to the next higher floor and the number of floors in the building were consistent predictors of stair use. With signs positioned, the visibility of the stairs while standing in front of elevators became a significant predictor of stair usage. Motivational signs and characteristics of built environments are associated with increased stair usage.
NASA Technical Reports Server (NTRS)
Reed, Robert A.; Ladbury, Ray L.; Day, John H. (Technical Monitor)
2000-01-01
Radiation effects in photonic and microelectronic components can impact the performance of high-speed digital optical data link in a variety of ways. This segment of the short course focuses on radiation effects in digital optical data links operating in the MHz to GHz regime. (Some of the information is applicable to frequencies above and below this regime) The three basic component level effects that should be considered are Total Ionizing Dose (TID), Displacement Damage Dose (DDD) and Single Event Effects (SEE). In some cases the system performance degradation can be quantified from component level tests, while in others a more holistic characterization approach must be taken. In Section 2.0 of this segment of the Short Course we will give a brief overview of the space radiation environment follow by a summary of the basic space radiation effects important for microelectronics and photonics listed above. The last part of this section will give an example of a typical mission radiation environment requirements. Section 3.0 gives an overview of intra-satellite digital optical data link systems. It contains a discussion of the digital optical data link and it's components. Also, we discuss some of the important system performance metrics that are impacted by radiation effects degradation of optical and optoelectronic component performance. Section 4.0 discusses radiation effects in optical and optoelectronic components. While each component effect will be discussed, the focus of this section is on degradation of passive optical components and SEE in photodiodes (other mechanisms are covered in segment II of this short course entitled "Photonic Devices with Complex and Multiple Failure Modes"). Section 5.0 will focus on optical data link system response to the space radiation environment. System level SEE ground testing will be discussed. Then we give a discussion of system level assessment of data link performance when operating in the space radiation environment.
GeoSegmenter: A statistically learned Chinese word segmenter for the geoscience domain
NASA Astrophysics Data System (ADS)
Huang, Lan; Du, Youfu; Chen, Gongyang
2015-03-01
Unlike English, the Chinese language has no space between words. Segmenting texts into words, known as the Chinese word segmentation (CWS) problem, thus becomes a fundamental issue for processing Chinese documents and the first step in many text mining applications, including information retrieval, machine translation and knowledge acquisition. However, for the geoscience subject domain, the CWS problem remains unsolved. Although a generic segmenter can be applied to process geoscience documents, they lack the domain specific knowledge and consequently their segmentation accuracy drops dramatically. This motivated us to develop a segmenter specifically for the geoscience subject domain: the GeoSegmenter. We first proposed a generic two-step framework for domain specific CWS. Following this framework, we built GeoSegmenter using conditional random fields, a principled statistical framework for sequence learning. Specifically, GeoSegmenter first identifies general terms by using a generic baseline segmenter. Then it recognises geoscience terms by learning and applying a model that can transform the initial segmentation into the goal segmentation. Empirical experimental results on geoscience documents and benchmark datasets showed that GeoSegmenter could effectively recognise both geoscience terms and general terms.
Rethinking Skin Lesion Segmentation in a Convolutional Classifier.
Burdick, Jack; Marques, Oge; Weinthal, Janet; Furht, Borko
2017-10-18
Melanoma is a fatal form of skin cancer when left undiagnosed. Computer-aided diagnosis systems powered by convolutional neural networks (CNNs) can improve diagnostic accuracy and save lives. CNNs have been successfully used in both skin lesion segmentation and classification. For reasons heretofore unclear, previous works have found image segmentation to be, conflictingly, both detrimental and beneficial to skin lesion classification. We investigate the effect of expanding the segmentation border to include pixels surrounding the target lesion. Ostensibly, segmenting a target skin lesion will remove inessential information, non-lesion skin, and artifacts to aid in classification. Our results indicate that segmentation border enlargement produces, to a certain degree, better results across all metrics of interest when using a convolutional based classifier built using the transfer learning paradigm. Consequently, preprocessing methods which produce borders larger than the actual lesion can potentially improve classifier performance, more than both perfect segmentation, using dermatologist created ground truth masks, and no segmentation altogether.
Automatic Segmentation and Quantification of Filamentous Structures in Electron Tomography
Loss, Leandro A.; Bebis, George; Chang, Hang; Auer, Manfred; Sarkar, Purbasha; Parvin, Bahram
2016-01-01
Electron tomography is a promising technology for imaging ultrastructures at nanoscale resolutions. However, image and quantitative analyses are often hindered by high levels of noise, staining heterogeneity, and material damage either as a result of the electron beam or sample preparation. We have developed and built a framework that allows for automatic segmentation and quantification of filamentous objects in 3D electron tomography. Our approach consists of three steps: (i) local enhancement of filaments by Hessian filtering; (ii) detection and completion (e.g., gap filling) of filamentous structures through tensor voting; and (iii) delineation of the filamentous networks. Our approach allows for quantification of filamentous networks in terms of their compositional and morphological features. We first validate our approach using a set of specifically designed synthetic data. We then apply our segmentation framework to tomograms of plant cell walls that have undergone different chemical treatments for polysaccharide extraction. The subsequent compositional and morphological analyses of the plant cell walls reveal their organizational characteristics and the effects of the different chemical protocols on specific polysaccharides. PMID:28090597
Automatic Segmentation and Quantification of Filamentous Structures in Electron Tomography.
Loss, Leandro A; Bebis, George; Chang, Hang; Auer, Manfred; Sarkar, Purbasha; Parvin, Bahram
2012-10-01
Electron tomography is a promising technology for imaging ultrastructures at nanoscale resolutions. However, image and quantitative analyses are often hindered by high levels of noise, staining heterogeneity, and material damage either as a result of the electron beam or sample preparation. We have developed and built a framework that allows for automatic segmentation and quantification of filamentous objects in 3D electron tomography. Our approach consists of three steps: (i) local enhancement of filaments by Hessian filtering; (ii) detection and completion (e.g., gap filling) of filamentous structures through tensor voting; and (iii) delineation of the filamentous networks. Our approach allows for quantification of filamentous networks in terms of their compositional and morphological features. We first validate our approach using a set of specifically designed synthetic data. We then apply our segmentation framework to tomograms of plant cell walls that have undergone different chemical treatments for polysaccharide extraction. The subsequent compositional and morphological analyses of the plant cell walls reveal their organizational characteristics and the effects of the different chemical protocols on specific polysaccharides.
How the built environment affects physical activity: views from urban planning.
Handy, Susan L; Boarnet, Marlon G; Ewing, Reid; Killingsworth, Richard E
2002-08-01
The link between the built environment and human behavior has long been of interest to the field of urban planning, but direct assessments of the links between the built environment and physical activity as it influences personal health are still rare in the field. Yet the concepts, theories, and methods used by urban planners provide a foundation for an emerging body of research on the relationship between the built environment and physical activity. Recent research efforts in urban planning have focused on the idea that land use and design policies can be used to increase transit use as well as walking and bicycling. The development of appropriate measures for the built environment and for travel behavior is an essential element of this research. The link between the built environment and travel behavior is then made using theoretical frameworks borrowed from economics, and in particular, the concept of travel as a derived demand. The available evidence lends itself to the argument that a combination of urban design, land use patterns, and transportation systems that promotes walking and bicycling will help create active, healthier, and more livable communities. To provide more conclusive evidence, however, researchers must address the following issues: An alternative to the derived-demand framework must be developed for walking, measures of the built environment must be refined, and more-complete data on walking must be developed. In addition, detailed data on the built environment must be spatially matched to detailed data on travel behavior.
Transformative Learning: Innovating Sustainability Education in Built Environment
ERIC Educational Resources Information Center
Iyer-Raniga, Usha; Andamon, Mary Myla
2016-01-01
Purpose: This paper aims to evaluate how transformative learning is key to innovating sustainability education in the built environment in the region's universities, in addition to reporting on the research project undertaken to integrate sustainability thinking and practice into engineering/built environment curricula in Asia-Pacific…
Villanueva, Karen; Badland, Hannah; Kvalsvig, Amanda; O'Connor, Meredith; Christian, Hayley; Woolcock, Geoffrey; Giles-Corti, Billie; Goldfeld, Sharon
2016-01-01
Healthy child development is determined by a combination of physical, social, family, individual, and environmental factors. Thus far, the majority of child development research has focused on the influence of individual, family, and school environments and has largely ignored the neighborhood context despite the increasing policy interest. Yet given that neighborhoods are the locations where children spend large periods of time outside of home and school, it is plausible the physical design of neighborhoods (built environment), including access to local amenities, can affect child development. The relatively few studies exploring this relationship support associations between child development and neighborhood destinations, green spaces, interaction with nature, traffic exposure, and housing density. These studies emphasize the need to more deeply understand how child development outcomes might be influenced by the neighborhood built environment. Pursuing this research space is well aligned with the current global movements on livable and child-friendly cities. It has direct public policy impact by informing planning policies across a range of sectors (urban design and planning, transport, public health, and pediatrics) to implement place-based interventions and initiatives that target children's health and development at the community level. We argue for the importance of exploring the effect of the neighborhood built environment on child development as a crucial first step toward informing urban design principles to help reduce developmental vulnerability in children and to set optimal child development trajectories early. Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.
Roda, C; Charreire, H; Feuillet, T; Mackenbach, J D; Compernolle, S; Glonti, K; Ben Rebah, M; Bárdos, H; Rutter, H; McKee, M; De Bourdeaudhuij, I; Brug, J; Lakerveld, J; Oppert, J-M
2016-01-01
Findings from research on the association between the built environment and obesity remain equivocal but may be partly explained by differences in approaches used to characterize the built environment. Findings obtained using subjective measures may differ substantially from those measured objectively. We investigated the agreement between perceived and objectively measured obesogenic environmental features to assess (1) the extent of agreement between individual perceptions and observable characteristics of the environment and (2) the agreement between aggregated perceptions and observable characteristics, and whether this varied by type of characteristic, region or neighbourhood. Cross-sectional data from the SPOTLIGHT project (n = 6037 participants from 60 neighbourhoods in five European urban regions) were used. Residents' perceptions were self-reported, and objectively measured environmental features were obtained by a virtual audit using Google Street View. Percent agreement and Kappa statistics were calculated. The mismatch was quantified at neighbourhood level by a distance metric derived from a factor map. The extent to which the mismatch metric varied by region and neighbourhood was examined using linear regression models. Overall, agreement was moderate (agreement < 82%, kappa < 0.3) and varied by obesogenic environmental feature, region and neighbourhood. Highest agreement was found for food outlets and outdoor recreational facilities, and lowest agreement was obtained for aesthetics. In general, a better match was observed in high-residential density neighbourhoods characterized by a high density of food outlets and recreational facilities. Future studies should combine perceived and objectively measured built environment qualities to better understand the potential impact of the built environment on health, particularly in low residential density neighbourhoods. © 2016 World Obesity.
Adaptation and Evaluation of the Neighborhood Environment Walkability Scale in India (NEWS-India).
Adlakha, Deepti; Hipp, J Aaron; Brownson, Ross C
2016-04-02
Physical inactivity is the fourth leading risk factor for global mortality, with most of these deaths occurring in low and middle-income countries (LMICs) like India. Research from developed countries has consistently demonstrated associations between built environment features and physical activity levels of populations. The development of culturally sensitive and reliable measures of the built environment is a necessary first step for accurate analysis of environmental correlates of physical activity in LMICs. This study systematically adapted the Neighborhood Environment Walkability Scale (NEWS) for India and evaluated aspects of test-retest reliability of the adapted version among Indian adults. Cultural adaptation of the NEWS was conducted by Indian and international experts. Semi-structured interviews were conducted with local residents and key informants in the city of Chennai, India. At baseline, participants (N = 370; female = 47.2%) from Chennai completed the adapted NEWS-India surveys on perceived residential density, land use mix-diversity, land use mix-access, street connectivity, infrastructure and safety for walking and cycling, aesthetics, traffic safety, and safety from crime. NEWS-India was administered for a second time to consenting participants (N = 62; female = 53.2%) with a gap of 2-3 weeks between successive administrations. Qualitative findings demonstrated that built environment barriers and constraints to active commuting and physical activity behaviors intersected with social ecological systems. The adapted NEWS subscales had moderate to high test-retest reliability (ICC range 0.48-0.99). The NEWS-India demonstrated acceptable measurement properties among Indian adults and may be a useful tool for evaluation of built environment attributes in India. Further adaptation and evaluation in rural and suburban settings in India is essential to create a version that could be used throughout India.
Shariff-Marco, Salma; Von Behren, Julie; Reynolds, Peggy; Keegan, Theresa H M; Hertz, Andrew; Kwan, Marilyn L; Roh, Janise M; Thomsen, Catherine; Kroenke, Candyce H; Ambrosone, Christine; Kushi, Lawrence H; Gomez, Scarlett Lin
2017-04-01
Background: As social and built environment factors have been shown to be associated with physical activity, dietary patterns, and obesity in the general population, they likely also influence these health behaviors among cancer survivors and thereby impact survivorship outcomes. Methods: Enhancing the rich, individual-level survey and medical record data from 4,505 breast cancer survivors in the Pathways Study, a prospective cohort drawn from Kaiser Permanente Northern California, we geocoded baseline residential addresses and appended social and built environment data. With multinomial logistic models, we examined associations between neighborhood characteristics and body mass index and whether neighborhood factors explained racial/ethnic/nativity disparities in overweight/obesity. Results: Low neighborhood socioeconomic status, high minority composition, high traffic density, high prevalence of commuting by car, and a higher number of fast food restaurants were independently associated with higher odds of overweight or obesity. The higher odds of overweight among African Americans, U.S.-born Asian Americans/Pacific Islanders, and foreign-born Hispanics and the higher odds of obesity among African Americans and U.S.-born Hispanics, compared with non-Hispanic whites, remained significant, although somewhat attenuated, when accounting for social and built environment features. Conclusions: Addressing aspects of neighborhood environments may help breast cancer survivors maintain a healthy body weight. Impact: Further research in this area, such as incorporating data on individuals' perceptions and use of their neighborhood environments, is needed to ultimately inform multilevel interventions that would ameliorate such disparities and improve outcomes for breast cancer survivors, regardless of their social status (e.g., race/ethnicity, socioeconomic status, nativity). Cancer Epidemiol Biomarkers Prev; 26(4); 505-15. ©2017 AACR See all the articles in this CEBP Focus section, "Geospatial Approaches to Cancer Control and Population Sciences." ©2017 American Association for Cancer Research.
Adaptation and Evaluation of the Neighborhood Environment Walkability Scale in India (NEWS-India)
Adlakha, Deepti; Hipp, J. Aaron; Brownson, Ross C.
2016-01-01
Physical inactivity is the fourth leading risk factor for global mortality, with most of these deaths occurring in low and middle-income countries (LMICs) like India. Research from developed countries has consistently demonstrated associations between built environment features and physical activity levels of populations. The development of culturally sensitive and reliable measures of the built environment is a necessary first step for accurate analysis of environmental correlates of physical activity in LMICs. This study systematically adapted the Neighborhood Environment Walkability Scale (NEWS) for India and evaluated aspects of test-retest reliability of the adapted version among Indian adults. Cultural adaptation of the NEWS was conducted by Indian and international experts. Semi-structured interviews were conducted with local residents and key informants in the city of Chennai, India. At baseline, participants (N = 370; female = 47.2%) from Chennai completed the adapted NEWS-India surveys on perceived residential density, land use mix-diversity, land use mix-access, street connectivity, infrastructure and safety for walking and cycling, aesthetics, traffic safety, and safety from crime. NEWS-India was administered for a second time to consenting participants (N = 62; female = 53.2%) with a gap of 2–3 weeks between successive administrations. Qualitative findings demonstrated that built environment barriers and constraints to active commuting and physical activity behaviors intersected with social ecological systems. The adapted NEWS subscales had moderate to high test-retest reliability (ICC range 0.48–0.99). The NEWS-India demonstrated acceptable measurement properties among Indian adults and may be a useful tool for evaluation of built environment attributes in India. Further adaptation and evaluation in rural and suburban settings in India is essential to create a version that could be used throughout India. PMID:27049394
2017-05-05
The Community Preventive Services Task Force recently posted new information on its website: "Physical Activity: Built Environment Approaches Combining Transportation System Interventions with Land Use and Environmental Design." This information is available at https://www.thecommunityguide.org/findings/physical-activity-built-environment-approaches.
Focus group discussion in built environment qualitative research practice
NASA Astrophysics Data System (ADS)
Omar, D.
2018-02-01
Focus groups discussion is a useful way in built environment for qualitative research practice. Drawing upon recent reviews of focus group discussion and examples of how focus group discussions have been used by researchers and educators, this paper provides what actually happens in focus group discussion as practiced. There is difference between group of people and topic of interest. This article examines the focus group discussions as practiced in built environment. Thus, there is broad form of focus group discussions as practiced in built environment and the applications are varied.
Techniques to derive geometries for image-based Eulerian computations
Dillard, Seth; Buchholz, James; Vigmostad, Sarah; Kim, Hyunggun; Udaykumar, H.S.
2014-01-01
Purpose The performance of three frequently used level set-based segmentation methods is examined for the purpose of defining features and boundary conditions for image-based Eulerian fluid and solid mechanics models. The focus of the evaluation is to identify an approach that produces the best geometric representation from a computational fluid/solid modeling point of view. In particular, extraction of geometries from a wide variety of imaging modalities and noise intensities, to supply to an immersed boundary approach, is targeted. Design/methodology/approach Two- and three-dimensional images, acquired from optical, X-ray CT, and ultrasound imaging modalities, are segmented with active contours, k-means, and adaptive clustering methods. Segmentation contours are converted to level sets and smoothed as necessary for use in fluid/solid simulations. Results produced by the three approaches are compared visually and with contrast ratio, signal-to-noise ratio, and contrast-to-noise ratio measures. Findings While the active contours method possesses built-in smoothing and regularization and produces continuous contours, the clustering methods (k-means and adaptive clustering) produce discrete (pixelated) contours that require smoothing using speckle-reducing anisotropic diffusion (SRAD). Thus, for images with high contrast and low to moderate noise, active contours are generally preferable. However, adaptive clustering is found to be far superior to the other two methods for images possessing high levels of noise and global intensity variations, due to its more sophisticated use of local pixel/voxel intensity statistics. Originality/value It is often difficult to know a priori which segmentation will perform best for a given image type, particularly when geometric modeling is the ultimate goal. This work offers insight to the algorithm selection process, as well as outlining a practical framework for generating useful geometric surfaces in an Eulerian setting. PMID:25750470
Built environment and diabetes
Pasala, Sudhir Kumar; Rao, Allam Appa; Sridhar, G. R.
2010-01-01
Development of type 2 diabetes mellitus is influenced by built environment, which is, ‘the environments that are modified by humans, including homes, schools, workplaces, highways, urban sprawls, accessibility to amenities, leisure, and pollution.’ Built environment contributes to diabetes through access to physical activity and through stress, by affecting the sleep cycle. With globalization, there is a possibility that western environmental models may be replicated in developing countries such as India, where the underlying genetic predisposition makes them particularly susceptible to diabetes. Here we review published information on the relationship between built environment and diabetes, so that appropriate modifications can be incorporated to reduce the risk of developing diabetes mellitus. PMID:20535308
Baek, Jonggyu; Sanchez-Vaznaugh, Emma V.; Sánchez, Brisa N.
2016-01-01
It is well known that associations between features of the built environment and health depend on the geographic scale used to construct environmental attributes. In the built environment literature, it has long been argued that geographic scales may vary across study locations. However, this hypothesized variation has not been systematically examined due to a lack of available statistical methods. We propose a hierarchical distributed-lag model (HDLM) for estimating the underlying overall shape of food environment–health associations as a function of distance from locations of interest. This method enables indirect assessment of relevant geographic scales and captures area-level heterogeneity in the magnitudes of associations, along with relevant distances within areas. The proposed model was used to systematically examine area-level variation in the association between availability of convenience stores around schools and children's weights. For this case study, body mass index (weight kg)/height (m)2) z scores (BMIz) for 7th grade children collected via California's 2001–2009 FitnessGram testing program were linked to a commercial database that contained locations of food outlets statewide. Findings suggested that convenience store availability may influence BMIz only in some places and at varying distances from schools. Future research should examine localized environmental or policy differences that may explain the heterogeneity in convenience store–BMIz associations. PMID:26888753
Durand, C P; Andalib, M; Dunton, G F; Wolch, J; Pentz, M A
2011-05-01
Smart growth is an approach to urban planning that provides a framework for making community development decisions. Despite its growing use, it is not known whether smart growth can impact physical activity. This review utilizes existing built environment research on factors that have been used in smart growth planning to determine whether they are associated with physical activity or body mass. Searching the MEDLINE, Psycinfo and Web-of-Knowledge databases, 204 articles were identified for descriptive review, and 44 for a more in-depth review of studies that evaluated four or more smart growth planning principles. Five smart growth factors (diverse housing types, mixed land use, housing density, compact development patterns and levels of open space) were associated with increased levels of physical activity, primarily walking. Associations with other forms of physical activity were less common. Results varied by gender and method of environmental assessment. Body mass was largely unaffected. This review suggests that several features of the built environment associated with smart growth planning may promote important forms of physical activity. Future smart growth community planning could focus more directly on health, and future research should explore whether combinations or a critical mass of smart growth features is associated with better population health outcomes. © 2011 The Authors. obesity reviews © 2011 International Association for the Study of Obesity.
Szapocznik, José; Lombard, Joanna; Martinez, Frank; Mason, Craig A.; Gorman-Smith, Deborah; Plater-Zyberk, Elizabeth; Brown, Scott C.; Spokane, Arnold
2013-01-01
A population-based study examined the relationship between diversity of use of the built environment and teacher reports of children's grades. Diversity of use of the built environment (i.e., proportion of a block that is residential, institutional, commercial and vacant) was assessed for all 403 city blocks in East Little Havana, Miami—a Hispanic neighborhood. Cluster analysis identified three block-types, based on diversity of use: Residential, Mixed-Use, and Commercial. Cross-classified hierarchical linear modeling was used to examine the impact of diversity of use, school, gender, and year-in-school on academic and conduct grades for 2857 public school children who lived in these blocks. Contrary to popular belief, mixed-use blocks were associated with optimal outcomes. Specifically, follow-up analyses found that a youth living on a residential block had a 74% greater odds of being in the lowest 10% of conduct grades (conduct GPA <2.17) than a youth living on a mixed-use block. In fact, an analysis of the population attributable fraction suggests that if the risk associated with residential blocks could be reduced to the level of risk associated with mixed-use blocks, a 38% reduction in Conduct GPAs <2.17 could be achieved in the total population. These findings suggest that public policy targeting the built environment may be a mechanism for community-based interventions to enhance children's classroom conduct, and potentially related sequelae. PMID:16967342
Built Environment, Adiposity, and Physical Activity in Adults Aged 50–75
Li, Fuzhong; Harmer, Peter A.; Cardinal, Bradley J.; Bosworth, Mark; Acock, Alan; Johnson-Shelton, Deborah; Moore, Jane M.
2008-01-01
Background Few studies have investigated the built environment and its association with health—especially excess adiposity—and physical activity in the immediate pre-Baby Boom/early-Baby Boom generations, soon to be the dominant demographic in the U.S. The purpose of this study was to examine this relationship. Methods This study used a cross-sectional, multilevel design with neighborhoods as the primary sampling unit (PSU). Residents (N=1221; aged 50–75) were recruited from 120 neighborhoods in Portland OR. The independent variables at the PSU level involved GIS-derived measures of land-use mix, distribution of fast-food outlets, street connectivity, access to public transportation, and green and open spaces. Dependent variables included resident-level measures of excess adiposity (BMI ≥25), three walking activities, and physical activity. Data were collected in 2006–2007 and analyzed in 2007. Results Each unit (i.e., 10%) increase in land-use mix was associated with a 25% reduction in the prevalence of overweight/obesity. However, a 1-SD increase in the density of fast-food outlets was associated with a 7% increase in overweight/obesity. Higher mixed-use land was positively associated with all three types of walking activities and the meeting of physical activity recommendations. Neighborhoods with high street connectivity, high density of public transit stations, and green and open spaces were related in varying degrees to walking and the meeting of physical activity recommendations. The analyses adjusted for neighborhood- and resident-level sociodemographic characteristics. Conclusions Findings suggest the need for public health and city planning officials to address modifiable neighborhood-level, built-environment characteristics to create more livable residential communities aimed at both addressing factors that may influence unhealthy eating and promoting active, healthy lifestyles in this rapidly growing population. PMID:18541175
ERIC Educational Resources Information Center
Carr, Paul R.; Pluim, Gary; Thésée, Gina
2014-01-01
The manner in which the built environment is constructed has a tremendous effect on the degree to which health, wealth and social outcomes are distributed within a society. This is particularly evident when a crisis of the natural environment affects the built environment, as was the case after the Haitian earthquake of 2010. Understanding the…
Katapally, Tarun Reddy; Muhajarine, Nazeem
2015-01-01
Objectives In curbing physical inactivity, as behavioural interventions directed at individuals have not produced a population-level change, an ecological perspective called active living research has gained prominence. However, active living research consistently underexplores the role played by a perennial phenomenon encompassing all other environmental exposures—variation in weather. After factoring in weather variation, this study investigated the influence of diverse environmental exposures (including urban design and built environment) on the accumulation of globally recommended moderate to vigorous physical activity levels (MVPA) in children. Design This cross-sectional observational study is part of an active living initiative set in the Canadian prairie city of Saskatoon. As part of this study, Saskatoon's neighbourhoods were classified based on urban street design into grid-pattern, fractured grid-pattern and curvilinear types of neighbourhoods. Moreover, diverse environmental exposures were measured including, neighbourhood built environment, and neighbourhood and household socioeconomic environment. Actical accelerometers were deployed between April and June 2010 (spring-summer) to derive MVPA of 331 10–14-year-old children in 25 1-week cycles. Each cycle of accelerometry was conducted on a different cohort of children within the total sample and matched with weather data obtained from Environment Canada. Multilevel modelling using Hierarchical Linear and Non-linear Modelling software was conducted by factoring in weather variation to depict the influence of diverse environmental exposures on the accumulation of recommended MVPA. Results Urban design, including diversity of destinations within neighbourhoods played a significant role in the accumulation of MVPA. After factoring in weather variation, it was observed that children living in neighbourhoods closer to the city centre (with higher diversity of destinations) were more likely to accumulate recommended MVPA. Conclusions The findings indicate that after factoring in weather variation, certain types of urban design are more likely to be associated with MVPA accumulation. PMID:26621516
Zapata-Diomedi, Belen; Herrera, Ana Maria Mantilla; Veerman, J Lennert
2016-11-01
Attributes of the built environment can positively influence physical activity of urban populations, which results in health and economic benefits. In this study, we derived scenarios from the literature for the association built environment-physical activity and used a mathematical model to translate improvements in physical activity to health-adjusted life years and health care costs. We modelled 28 scenarios representing a diverse range of built environment attributes including density, diversity of land use, availability of destinations, distance to transit, design and neighbourhood walkability. Our results indicated potential health gains in 24 of the 28 modelled built environment attributes. Health care cost savings due to prevented physical activity-related diseases ranged between A$1300 to A$105,355 per 100,000 adults per year. On the other hand, additional health care costs of prolonged life years attributable to improvements in physical activity were nearly 50% higher than the estimated health care costs savings. Our results give an indication of the potential health benefits of investing in physical activity-friendly built environments. Copyright © 2016 Elsevier Ltd. All rights reserved.
Identification of Alfalfa Leaf Diseases Using Image Recognition Technology
Qin, Feng; Liu, Dongxia; Sun, Bingda; Ruan, Liu; Ma, Zhanhong; Wang, Haiguang
2016-01-01
Common leaf spot (caused by Pseudopeziza medicaginis), rust (caused by Uromyces striatus), Leptosphaerulina leaf spot (caused by Leptosphaerulina briosiana) and Cercospora leaf spot (caused by Cercospora medicaginis) are the four common types of alfalfa leaf diseases. Timely and accurate diagnoses of these diseases are critical for disease management, alfalfa quality control and the healthy development of the alfalfa industry. In this study, the identification and diagnosis of the four types of alfalfa leaf diseases were investigated using pattern recognition algorithms based on image-processing technology. A sub-image with one or multiple typical lesions was obtained by artificial cutting from each acquired digital disease image. Then the sub-images were segmented using twelve lesion segmentation methods integrated with clustering algorithms (including K_means clustering, fuzzy C-means clustering and K_median clustering) and supervised classification algorithms (including logistic regression analysis, Naive Bayes algorithm, classification and regression tree, and linear discriminant analysis). After a comprehensive comparison, the segmentation method integrating the K_median clustering algorithm and linear discriminant analysis was chosen to obtain lesion images. After the lesion segmentation using this method, a total of 129 texture, color and shape features were extracted from the lesion images. Based on the features selected using three methods (ReliefF, 1R and correlation-based feature selection), disease recognition models were built using three supervised learning methods, including the random forest, support vector machine (SVM) and K-nearest neighbor methods. A comparison of the recognition results of the models was conducted. The results showed that when the ReliefF method was used for feature selection, the SVM model built with the most important 45 features (selected from a total of 129 features) was the optimal model. For this SVM model, the recognition accuracies of the training set and the testing set were 97.64% and 94.74%, respectively. Semi-supervised models for disease recognition were built based on the 45 effective features that were used for building the optimal SVM model. For the optimal semi-supervised models built with three ratios of labeled to unlabeled samples in the training set, the recognition accuracies of the training set and the testing set were both approximately 80%. The results indicated that image recognition of the four alfalfa leaf diseases can be implemented with high accuracy. This study provides a feasible solution for lesion image segmentation and image recognition of alfalfa leaf disease. PMID:27977767
Identification of Alfalfa Leaf Diseases Using Image Recognition Technology.
Qin, Feng; Liu, Dongxia; Sun, Bingda; Ruan, Liu; Ma, Zhanhong; Wang, Haiguang
2016-01-01
Common leaf spot (caused by Pseudopeziza medicaginis), rust (caused by Uromyces striatus), Leptosphaerulina leaf spot (caused by Leptosphaerulina briosiana) and Cercospora leaf spot (caused by Cercospora medicaginis) are the four common types of alfalfa leaf diseases. Timely and accurate diagnoses of these diseases are critical for disease management, alfalfa quality control and the healthy development of the alfalfa industry. In this study, the identification and diagnosis of the four types of alfalfa leaf diseases were investigated using pattern recognition algorithms based on image-processing technology. A sub-image with one or multiple typical lesions was obtained by artificial cutting from each acquired digital disease image. Then the sub-images were segmented using twelve lesion segmentation methods integrated with clustering algorithms (including K_means clustering, fuzzy C-means clustering and K_median clustering) and supervised classification algorithms (including logistic regression analysis, Naive Bayes algorithm, classification and regression tree, and linear discriminant analysis). After a comprehensive comparison, the segmentation method integrating the K_median clustering algorithm and linear discriminant analysis was chosen to obtain lesion images. After the lesion segmentation using this method, a total of 129 texture, color and shape features were extracted from the lesion images. Based on the features selected using three methods (ReliefF, 1R and correlation-based feature selection), disease recognition models were built using three supervised learning methods, including the random forest, support vector machine (SVM) and K-nearest neighbor methods. A comparison of the recognition results of the models was conducted. The results showed that when the ReliefF method was used for feature selection, the SVM model built with the most important 45 features (selected from a total of 129 features) was the optimal model. For this SVM model, the recognition accuracies of the training set and the testing set were 97.64% and 94.74%, respectively. Semi-supervised models for disease recognition were built based on the 45 effective features that were used for building the optimal SVM model. For the optimal semi-supervised models built with three ratios of labeled to unlabeled samples in the training set, the recognition accuracies of the training set and the testing set were both approximately 80%. The results indicated that image recognition of the four alfalfa leaf diseases can be implemented with high accuracy. This study provides a feasible solution for lesion image segmentation and image recognition of alfalfa leaf disease.
Nilsson, R. Henrik; Taylor, Andy F. S.; Adams, Rachel I.; Baschien, Christiane; Johan Bengtsson-Palme; Cangren, Patrik; Coleine, Claudia; Heide-Marie Daniel; Glassman, Sydney I.; Hirooka, Yuuri; Irinyi, Laszlo; Reda Iršėnaitė; Pedro M. Martin-Sanchez; Meyer, Wieland; Seung-Yoon Oh; Jose Paulo Sampaio; Seifert, Keith A.; Sklenář, Frantisek; Dirk Stubbe; Suh, Sung-Oui; Summerbell, Richard; Svantesson, Sten; Martin Unterseher; Cobus M. Visagie; Weiss, Michael; Woudenberg, Joyce HC; Christian Wurzbacher; den Wyngaert, Silke Van; Yilmaz, Neriman; Andrey Yurkov; Kõljalg, Urmas; Abarenkov, Kessy
2018-01-01
Abstract Recent DNA-based studies have shown that the built environment is surprisingly rich in fungi. These indoor fungi – whether transient visitors or more persistent residents – may hold clues to the rising levels of human allergies and other medical and building-related health problems observed globally. The taxonomic identity of these fungi is crucial in such pursuits. Molecular identification of the built mycobiome is no trivial undertaking, however, given the large number of unidentified, misidentified, and technically compromised fungal sequences in public sequence databases. In addition, the sequence metadata required to make informed taxonomic decisions – such as country and host/substrate of collection – are often lacking even from reference and ex-type sequences. Here we report on a taxonomic annotation workshop (April 10–11, 2017) organized at the James Hutton Institute/University of Aberdeen (UK) to facilitate reproducible studies of the built mycobiome. The 32 participants went through public fungal ITS barcode sequences related to the built mycobiome for taxonomic and nomenclatural correctness, technical quality, and metadata availability. A total of 19,508 changes – including 4,783 name changes, 14,121 metadata annotations, and the removal of 99 technically compromised sequences – were implemented in the UNITE database for molecular identification of fungi (https://unite.ut.ee/) and shared with a range of other databases and downstream resources. Among the genera that saw the largest number of changes were Penicillium, Talaromyces, Cladosporium, Acremonium, and Alternaria, all of them of significant importance in both culture-based and culture-independent surveys of the built environment. PMID:29559822
Usability of a Runtime Environment for the Use of IMS Learning Design in Mixed Mode Higher Education
ERIC Educational Resources Information Center
Klebl, Michael
2006-01-01
Starting from the first public draft of IMS Learning Design in November 2002, a research project at the Catholic University Eichstaett-Ingolstadt in Germany was dedicated to the conceptual examination and empirical review of IMS Learning Design Level A. A prototypical runtime environment called "lab005" was developed. It was built based…
The Built Environment and Its Relationship to the Public’s Health: The Legal Framework
Perdue, Wendy Collins; Stone, Lesley A.; Gostin, Lawrence O.
2003-01-01
The built environment significantly affects the public’s health. This was most obvious when infectious disease was the primary public health threat during the industrial revolution; unsanitary conditions and overcrowded urban areas facilitated the spread of infection. However, even today in the age of chronic diseases there remains an important connection between population health and the built environment. Physical spaces can expose people to toxins or pollutants and influence lifestyles that contribute to diabetes, coronary vascular disease, and asthma. Public health advocates can help shape the design of cities and suburbs in ways that improve public health, but to do so effectively they need to understand the legal framework. This article reviews the connection between public health and the built environment and then describes the legal pathways for improving the design of our built environment. PMID:12948949
Recreating communities to support active living: a new role for social marketing.
Maibach, Edward W
2003-01-01
The lack of routine physical activity has become an all too pervasive health threat in the United States. Social marketing can be used directly to promote increased physical activity among people who have access to active living options (e.g., safe and convenient sidewalks or bike paths). A second, albeit indirect, use of social marketing to promote physical activity--and the focus of this article--involves promoting behaviors that influence the built environment for the purpose of increasing people's access to active living options. This use of social marketing involves changing the behavior of consumers, developers, distribution channels (e.g., real estate agents) and policy makers. The approach offers public health and other organizations a disciplined, consumer-focused means of mobilizing their available resources in a manner that maximizes the odds of creating active living communities. These means include understanding the competition, understanding target markets, creating mutually beneficial exchanges, segmenting markets and targeting them based on anticipated return. This article identifies specific opportunities for applying the social marketing approach to create active living communities, and identifies opportunities at the state and national level that will enhance the effectiveness of local efforts.
NASA Astrophysics Data System (ADS)
Abusafieh, Shaden; Razem, Maiss
2017-11-01
Recently, technological advancements in the sustainable design field have allowed us to reduce the ecological impact of the built environment, to reduce consumption of non-renewable resources, to create healthy environments and in some cases may even rehabilitate the ecosystem. Nevertheless, several studies have been carried out showing that sustainable technology does not automatically lead to environmentally friendly behaviors in its users. Various environmental problems threaten environmental sustainability and many of these problems are rooted in human behavior. Unfortunately, there is a lack in studies which take into consideration the human behavior influences within a sustainable built environment. We believe that the built environment should be used to support human goals and requirements, but at the same time we should consider it as a context in which human values and behaviors are cultivated. This research aimed to help in promoting environmental sustainability by using architectural design in changing relevant human behavior toward an environmentally friendly behavior. In order to achieve this, the research adopted Environment-centered Approach to gain more acute perspective into the relationship between the physical environment and human behavior, focusing on social, psychological and physical influences of the built environment. It appears that environmental psychology's merits have high potential in changing behavior within the built environment. The research provides a systematic approach for selecting, assessing, evaluating the behaviors to be changed and the factors that determine them. Furthermore, this approach helps in choosing the best interventions that could be applied in built environment to encourage such a sustainable behavior. This study tried to construct an agenda for further researches to find particular architectural design elements and strategies that we can harness to develop a pro-environment human behavior.
Hirsch, Jana A.; Grengs, Joe; Schulz, Amy; Adar, Sara D.; Rodriguez, Daniel A.; Brines, Shannon J.; Diez Roux, Ana V.
2016-01-01
Investments in neighborhood built environments could increase physical activity and overall health. Disproportionate distribution of these changes in advantaged neighborhoods could inflate health disparities. Little information exists on where changes are occurring. This paper aims to 1) identify changes in the built environment in neighborhoods and 2) investigate associations between high levels of change and sociodemographic characteristics. Using Geographic Information Systems, neighborhood land-use, local destinations (for walking, social engagement, and physical activity), and sociodemographics were characterized in 2000 and 2010 for seven U.S. cities. Linear and change on change models estimated associations of built environment changes with baseline (2000) and change (2010–2000) in sociodemographics. Spatial patterns were assessed using Global Moran’s I to measure overall clustering of change and Local Moran’s I to identify statistically significant clusters of high increases surrounded by high increases (HH). Sociodemographic characteristics were compared between HH cluster and other tracts using Analysis of Variance (ANOVA). We observed small land-use changes but increases in the destination types. Greater increases in destinations were associated with higher percentage non-Hispanic whites, percentage households with no vehicle, and median household income. Associations were present for both baseline sociodemographics and changes over time. Greater increases in destinations were associated with lower baseline percentage over 65 but higher increases in percentage over 65 between 2000 and 2010. Global Moran’s indicated changes were spatially clustered. HH cluster tracts started with a higher percentage non-Hispanic whites and higher percentage of households without vehicles. Between 2000 and 2010, HH cluster tracts experienced increases in percent non-Hispanic white, greater increases in median household income, and larger decreases in percent of households without a vehicle. Changes in the built environment are occurring in neighborhoods across a diverse set of U.S. metropolitan areas, but are patterned such that they may lead to increased health disparities over time. PMID:27701020
McGill, Elizabeth; Egan, Matt; Petticrew, Mark; Mountford, Lesley; Milton, Sarah; Whitehead, Margaret; Lock, Karen
2015-01-01
Objectives Local government services and policies affect health determinants across many sectors such as planning, transportation, housing and leisure. Researchers and policymakers have argued that decisions affecting wider determinants of health, well-being and inequalities should be informed by evidence. This study explores how information and evidence are defined, assessed and utilised by local professionals situated beyond the health sector, but whose decisions potentially affect health: in this case, practitioners working in design, planning and maintenance of the built environment. Design A qualitative study using three focus groups. A thematic analysis was undertaken. Setting The focus groups were held in UK localities and involved local practitioners working in two UK regions, as well as in Brazil, USA and Canada. Participants UK and international practitioners working in the design and management of the built environment at a local government level. Results Participants described a range of data and information that constitutes evidence, of which academic research is only one part. Built environment decision-makers value empirical evidence, but also emphasise the legitimacy and relevance of less empirical ways of thinking through narratives that associate their work to art and philosophy. Participants prioritised evidence on the acceptability, deliverability and sustainability of interventions over evidence of longer term outcomes (including many health outcomes). Participants generally privileged local information, including personal experiences and local data, but were less willing to accept evidence from contexts perceived to be different from their own. Conclusions Local-level built environment practitioners utilise evidence to make decisions, but their view of ‘best evidence’ appears to prioritise local relevance over academic rigour. Academics can facilitate evidence-informed local decisions affecting social determinants of health by working with relevant practitioners to improve the quality of local data and evaluations, and by advancing approaches to improve the external validity of academic research. PMID:25838508
Community Level Stressors and Their Impacts on Food Contamination
Research is needed to understand a community’s food resources, utilization of those resources, and how the built and natural environment impact access to resources and potential chemical exposures. This research will identify stressors, relationships between those stressors...
Roberts, Jennifer D; Rodkey, Lindsey; Grisham, Cortney; Ray, Rashawn
2017-11-16
Sedentary behavior and physical inactivity are significant contributors to youth obesity in the United States. Neighborhood dog walking is an outlet for physical activity (PA). Therefore, understanding the relationship between built environment, dog ownership, and youth PA is essential. This study examined the influence of dog ownership and parental built environment perceptions on children's PA in the Washington, D.C. area. In 2014, questionnaires were mailed to 2000 parents to assess family dog ownership; children's outdoor dog walking or playing; and parental perceived built environment measures. Chi-square analyses examined differences in parental perceived built environment measures between children with and without family dogs. The sample included 144 children (50% female; average-age 9.7 years; 56.3% White; 23.7% African-American; 10.4% Asian-American; 29.9% owned dog). Only 13% and 5.6% of the children walked or played outdoors with the dog daily, respectively. A significantly greater proportion ( p -value < 0.05) of parents who owned dogs recognized and observed some home built environment measures (e.g., traffic speed on most streets is 30 mph or less) that were PA -promoting for their children. Findings suggest that dog ownership may provide more positive parental perceptions of the neighborhood built environment, which supports children's outdoor PA through dog walking and playing.
Mesh-To from Segmented Mesh Elements to Bim Model with Limited Parameters
NASA Astrophysics Data System (ADS)
Yang, X.; Koehl, M.; Grussenmeyer, P.
2018-05-01
Building Information Modelling (BIM) technique has been widely utilized in heritage documentation and comes to a general term Historical/Heritage BIM (HBIM). The current HBIM project mostly employs the scan-to-BIM process to manually create the geometric model from the point cloud. This paper explains how it is possible to shape from the mesh geometry with reduced human involvement during the modelling process. Aiming at unbuilt heritage, two case studies are handled in this study, including a ruined Roman stone architectural and a severely damaged abbey. The pipeline consists of solid element modelling based on documentation data using Autodesk Revit, a common BIM platform, and the successive modelling from these geometric primitives using Autodesk Dynamo, a visual programming built-in plugin tool in Revit. The BIM-based reconstruction enriches the classic visual model from computer graphics approaches with measurement, semantic and additional information. Dynamo is used to develop a semi-automated function to reduce the manual process, which builds the final BIM model from segmented parametric elements directly. The level of detail (LoD) of the final models is dramatically relevant with the manual involvement in the element creation. The proposed outline also presents two potential issues in the ongoing work: combining the ontology semantics with the parametric BIM model, and introducing the proposed pipeline into the as-built HBIM process.
Baek, Jonggyu; Sanchez-Vaznaugh, Emma V; Sánchez, Brisa N
2016-03-15
It is well known that associations between features of the built environment and health depend on the geographic scale used to construct environmental attributes. In the built environment literature, it has long been argued that geographic scales may vary across study locations. However, this hypothesized variation has not been systematically examined due to a lack of available statistical methods. We propose a hierarchical distributed-lag model (HDLM) for estimating the underlying overall shape of food environment-health associations as a function of distance from locations of interest. This method enables indirect assessment of relevant geographic scales and captures area-level heterogeneity in the magnitudes of associations, along with relevant distances within areas. The proposed model was used to systematically examine area-level variation in the association between availability of convenience stores around schools and children's weights. For this case study, body mass index (weight kg)/height (m)2) z scores (BMIz) for 7th grade children collected via California's 2001-2009 FitnessGram testing program were linked to a commercial database that contained locations of food outlets statewide. Findings suggested that convenience store availability may influence BMIz only in some places and at varying distances from schools. Future research should examine localized environmental or policy differences that may explain the heterogeneity in convenience store-BMIz associations. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Perceived built environment and physical activity in U.S. women by sprawl and region.
Troped, Philip J; Tamura, Kosuke; Whitcomb, Heather A; Laden, Francine
2011-11-01
A number of studies have demonstrated relationships between the perceived built environment and physical activity among adults. However, little is known about whether these associations differ by U.S. region and level of urban sprawl. To examine associations between the perceived built environment and physical activity in U.S. women by region and urban sprawl. Nurses' Health Study II participants (N=68,968) completed four perceived neighborhood environment survey items in 2005. Logistic regression was used to estimate associations with meeting physical activity recommendations, adjusting for demographic and weight-status variables, and stratifying by region and sprawl. Data analyses were completed in 2011. Perceived proximity to shops/stores was positively associated with physical activity across regions and levels of sprawl (ORs=1.21-1.46). Perceived access to recreation facilities was also a positive physical activity correlate in most region-sprawl strata, with strongest relationships found in the West (ORs=1.31-1.70). Perceived crime and presence of sidewalks did not show statistically significant associations with physical activity in most region-sprawl strata, although ORs for perceived crime showed a consistent pattern of negative associations (ORs=0.60-0.95). A higher number of positive environmental attributes was associated with a greater odds of meeting physical activity recommendations. Findings indicate that perceived proximity to shops/stores and access to recreation facilities are important correlates of physical activity for women, irrespective of region or sprawl. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.
Haseda, Maho; Kondo, Naoki; Ashida, Toyo; Tani, Yukako; Takagi, Daisuke; Kondo, Katsunori
2018-03-05
Although reducing socioeconomic inequalities in depression is necessary, their associated factors have rarely been studied. This study aimed to screen the potential contextual factors associated with income-based inequality in older adults' depression. Using data from the Japan Gerontological Evaluation Study (JAGES) of 2013, we conducted an ecological study covering 77 communities in Japan. Our measures of socioeconomic inequalities in depression were the slope index of inequalities (SII) and the relative index of inequalities (RII) of the prevalence of depressive symptoms across three income levels. We categorized available community-level factors, including socio-demographic factors, social participation, social relationships, subjective changes in the residential area, and the built environment. These indicators were aggregated from individual responses of 51,962 and 52,958 physically independent men and women, respectively, aged 65 years or more. We performed multiple linear regression analyses to explore factors with statistical significance of a two-tailed P-value less than 0.05. Factors associated with shallower gradients in depression for men included higher participation in local activities and reception or provision of social support, which did not show significant association among women. Perceived increases in unemployment and economic inequalities were positively associated with larger inequalities in both genders (P < 0.05). The built environment did not indicate any significant association. A community environment fostering social activities and relationships might be associated with smaller income-based inequalities in depression. There is a need for more deterministic studies for planning of effective community interventions to address socioeconomic inequalities in depression.
[Introduction and advantage analysis of the stepwise method for the construction of vascular trees].
Zhang, Yan; Xie, Haiwei; Zhu, Kai
2010-08-01
A new method for constructing the model of vascular trees was proposed in this paper. By use of this method, the arterial trees in good agreement with the actual structure could be grown. In this process, all vessels in the vascular tree were divided into two groups: the conveying vessels, and the delivering branches. And different branches could be built by different ways. Firstly, the distributing rules of conveying vessels were ascertained by use of measurement data, and then the conveying vessels were constructed in accordance to the statistical rule and optimization criterion. Lastly, delivering branches were modeled by constrained constructive optimization (CCO) on the conveying vessel-trees which had already been generated. In order to compare the CCO method and stepwise method proposed here, two 3D arterial trees of human tongue were grown with their vascular tree having a special structure. Based on the corrosion casts of real arterial tree of human tongue, the data about the two trees constructed by different methods were compared and analyzed, including the averaged segment diameters at respective levels, the distribution and the diameters of the branches of first level at respective directions. The results show that the vascular tree built by stepwise method is more similar to the true arterial of human tongue when compared against the tree built by CCO method.
The menthol marketing mix: targeted promotions for focus communities in the United States.
Cruz, Tess Boley; Wright, La Tanisha; Crawford, George
2010-12-01
This study analyzes tobacco industry menthol marketing strategies aimed at urban predominantly Black populations. Data are drawn from an interview with a former Brown & Williamson Tobacco Company trade marketing manager, tobacco industry documents on Kool promotions in urban areas, and public health literature on tobacco marketing. Tobacco companies recognize the growth potential for the menthol segment in these urban communities. They have higher levels of price discounts and signage, exert tight controls over the retail environment, and use hip-hop lifestyle to associate menthol products with urban nightlife, music, fame, and cultural edginess among younger smokers. Tobacco companies regard the urban Black menthol segment as one of the few markets in which they can grow sales despite declines elsewhere in the United States. Consequently, this population is surrounded by intense and integrated levels of marketing. We need strong monitoring, regulation, and enforcement efforts that will counter the industry's use of menthol at multiple levels in urban environments.
Degradability in vitro of polyurethanes based on synthetic atactic poly[(R,S)-3-hydroxybutyrate].
Brzeska, J; Janeczek, H; Janik, H; Kowalczuk, M; Rutkowska, M
2015-01-01
The aim of the present study was to determine the degradability of aliphatic polyurethanes, based on a different amount of synthetic, atactic poly[(R,S)-3-hydroxybutyrate] (a-PHB), in hydrolytic (phosphate buffer) and oxidative (H2O2/CoCl2) solutions. The soft segments were built with atactic poly[(R,S)-3-hydroxybutyrate] and polycaprolactone or polyoxytetramethylenediols, whereas hard segments were the reaction product of 4,4'-methylenedicyclohexyl diisocyanate and 1,4-butanediol.The selected properties - density and morphology of polymer surfaces - which could influence the sensitivity of polymers to degradation processes - were analyzed.The analysis of molecular mass (GPC), thermal properties (DSC) and the sample weight changes were undertaken to estimate the degree of degradability of polymer samples after incubation in environments studied.Investigated polyurethanes were amorphous with the very low amount of crystalline phases of hard segments.The polyurethane synthesized with a poly[(R,S)-3-hydroxybutyrate] and polyoxytetramethylenediol at a molar ratio of NCO:OH=3.7:1 (prepolymer step) appeared as the most sensitive for both degradative solutions. Its weight and molecular mass losses were the highest in comparison to other investigated polyurethanes.It could be expected that playing with the amount of poly[(R,S)-3-hydroxybutyrate] in polyurethane synthesis the rate of polyurethane degradation after immersion in living body would be modeled.
Lo, Brian K; Morgan, Emily H; Folta, Sara C; Graham, Meredith L; Paul, Lynn C; Nelson, Miriam E; Jew, Nicolette V; Moffat, Laurel F; Seguin, Rebecca A
2017-10-04
Rural populations in the United States have lower physical activity levels and are at a higher risk of being overweight and suffering from obesity than their urban counterparts. This paper aimed to understand the environmental factors that influence physical activity among rural adults in Montana. Eight built environment audits, 15 resident focus groups, and 24 key informant interviews were conducted between August and December 2014. Themes were triangulated and summarized into five categories of environmental factors: built, social, organizational, policy, and natural environments. Although the existence of active living features was documented by environmental audits, residents and key informants agreed that additional indoor recreation facilities and more well-maintained and conveniently located options were needed. Residents and key informants also agreed on the importance of age-specific, well-promoted, and structured physical activity programs, offered in socially supportive environments, as facilitators to physical activity. Key informants, however, noted that funding constraints and limited political will were barriers to developing these opportunities. Since building new recreational facilities and structures to support active transportation pose resource challenges, especially for rural communities, our results suggest that enhancing existing features, making small improvements, and involving stakeholders in the city planning process would be more fruitful to build momentum towards larger changes.
Chooz A, First Pressurized Water Reactor to be Dismantled in France - 13445
DOE Office of Scientific and Technical Information (OSTI.GOV)
Boucau, Joseph; Mirabella, C.; Nilsson, Lennart
2013-07-01
Nine commercial nuclear power plants have been permanently shut down in France to date, of which the Chooz A plant underwent an extensive decommissioning and dismantling program. Chooz Nuclear Power Station is located in the municipality of Chooz, Ardennes region, in the northeast part of France. Chooz B1 and B2 are 1,500 megawatt electric (MWe) pressurized water reactors (PWRs) currently in operation. Chooz A, a 305 MWe PWR implanted in two caves within a hill, began operations in 1967 and closed in 1991, and will now become the first PWR in France to be fully dismantled. EDF CIDEN (Engineering Centermore » for Dismantling and Environment) has awarded Westinghouse a contract for the dismantling of its Chooz A reactor vessel (RV). The project began in January 2010. Westinghouse is leading the project in a consortium with Nuvia France. The project scope includes overall project management, conditioning of the reactor vessel (RV) head, RV and RV internals segmentation, reactor nozzle cutting for lifting the RV out of the pit and seal it afterwards, dismantling of the RV thermal insulation, ALARA (As Low As Reasonably Achievable) forecast to ensure acceptable doses for the personnel, complementary vacuum cleaner to catch the chips during the segmentation work, needs and facilities, waste characterization and packaging, civil work modifications, licensing documentation. The RV and RV internals will be segmented based on the mechanical cutting technology that Westinghouse applied successfully for more than 13 years. The segmentation activities cover the cutting and packaging plan, tooling design and qualification, personnel training and site implementation. Since Chooz A is located inside two caves, the project will involve waste transportation from the reactor cave through long galleries to the waste buffer area. The project will end after the entire dismantling work is completed, and the waste storage is outside the caves and ready to be shipped either to the ANDRA (French National Radioactive Waste Management Agency) waste disposal facilities - (for low-level waste [LLW] and very low-level waste [VLLW], which are considered short lived) - or to the EDF Interim Storage Facility planned to be built on another site - (for low- and intermediate-level waste [LILW], which is considered long lived). The project has started with a detailed conceptual study that determines the step-by-step approach for dismantling the reactor and eventually supplying the packed containers ready for final disposal. All technical reports must be verified and approved by EDF and the French Nuclear Safety Authority before receiving the authorization to start the site work. The detailed conceptual study has been completed to date and equipment design and manufacturing is ongoing. This paper will present the conceptual design of the reactor internals segmentation and packaging process that will be implemented at Chooz A, including the planning, methodology, equipment, waste management, and packaging strategy. (authors)« less
Analysis and testing of a soft actuation system for segmented reflector articulation and isolation
NASA Technical Reports Server (NTRS)
Jandura, Louise; Agronin, Michael L.
1991-01-01
Segmented reflectors have been proposed for space-based applications such as optical communication and large-diameter telescopes. An actuation system for mirrors in a space-based segmented mirror array has been developed as part of the National Aeronautics and Space Administration-sponsored Precision Segmented Reflector program. The actuation system, called the Articulated Panel Module (APM), articulates a mirror panel in 3 degrees of freedom in the submicron regime, isolates the panel from structural motion, and simplifies space assembly of the mirrors to the reflector backup truss. A breadboard of the APM has been built and is described. Three-axis modeling, analysis, and testing of the breadboard is discussed.
Random walks with shape prior for cochlea segmentation in ex vivo μCT.
Ruiz Pujadas, Esmeralda; Kjer, Hans Martin; Piella, Gemma; Ceresa, Mario; González Ballester, Miguel Angel
2016-09-01
Cochlear implantation is a safe and effective surgical procedure to restore hearing in deaf patients. However, the level of restoration achieved may vary due to differences in anatomy, implant type and surgical access. In order to reduce the variability of the surgical outcomes, we previously proposed the use of a high-resolution model built from [Formula: see text] images and then adapted to patient-specific clinical CT scans. As the accuracy of the model is dependent on the precision of the original segmentation, it is extremely important to have accurate [Formula: see text] segmentation algorithms. We propose a new framework for cochlea segmentation in ex vivo [Formula: see text] images using random walks where a distance-based shape prior is combined with a region term estimated by a Gaussian mixture model. The prior is also weighted by a confidence map to adjust its influence according to the strength of the image contour. Random walks is performed iteratively, and the prior mask is aligned in every iteration. We tested the proposed approach in ten [Formula: see text] data sets and compared it with other random walks-based segmentation techniques such as guided random walks (Eslami et al. in Med Image Anal 17(2):236-253, 2013) and constrained random walks (Li et al. in Advances in image and video technology. Springer, Berlin, pp 215-226, 2012). Our approach demonstrated higher accuracy results due to the probability density model constituted by the region term and shape prior information weighed by a confidence map. The weighted combination of the distance-based shape prior with a region term into random walks provides accurate segmentations of the cochlea. The experiments suggest that the proposed approach is robust for cochlea segmentation.
NASA Technical Reports Server (NTRS)
Hall, Drew P.; Ly, William; Howard, Richard T.; Weir, John; Rakoczy, John; Roe, Fred (Technical Monitor)
2002-01-01
The software development for an upgrade to the Hobby-Eberly Telescope (HET) was done in LABView. In order to improve the performance of the HET at the McDonald Observatory, a closed-loop system had to be implemented to keep the mirror segments aligned during periods of observation. The control system, called the Segment Alignment Maintenance System (SAMs), utilized inductive sensors to measure the relative motions of the mirror segments. Software was developed in LABView to tie the sensors, operator interface, and mirror-control motors together. Developing the software in LABView allowed the system to be flexible, understandable, and able to be modified by the end users. Since LABView is built using block diagrams, the software naturally followed the designed control system's block and flow diagrams, and individual software blocks could be easily verified. LABView's many built-in display routines allowed easy visualization of diagnostic and health-monitoring data during testing. Also, since LABView is a multi-platform software package, different programmers could develop the code remotely on various types of machines. LABView s ease of use facilitated rapid prototyping and field testing. There were some unanticipated difficulties in the software development, but the use of LABView as the software "language" for the development of SAMs contributed to the overall success of the project.
The perception of naturalness correlates with low-level visual features of environmental scenes.
Berman, Marc G; Hout, Michael C; Kardan, Omid; Hunter, MaryCarol R; Yourganov, Grigori; Henderson, John M; Hanayik, Taylor; Karimi, Hossein; Jonides, John
2014-01-01
Previous research has shown that interacting with natural environments vs. more urban or built environments can have salubrious psychological effects, such as improvements in attention and memory. Even viewing pictures of nature vs. pictures of built environments can produce similar effects. A major question is: What is it about natural environments that produces these benefits? Problematically, there are many differing qualities between natural and urban environments, making it difficult to narrow down the dimensions of nature that may lead to these benefits. In this study, we set out to uncover visual features that related to individuals' perceptions of naturalness in images. We quantified naturalness in two ways: first, implicitly using a multidimensional scaling analysis and second, explicitly with direct naturalness ratings. Features that seemed most related to perceptions of naturalness were related to the density of contrast changes in the scene, the density of straight lines in the scene, the average color saturation in the scene and the average hue diversity in the scene. We then trained a machine-learning algorithm to predict whether a scene was perceived as being natural or not based on these low-level visual features and we could do so with 81% accuracy. As such we were able to reliably predict subjective perceptions of naturalness with objective low-level visual features. Our results can be used in future studies to determine if these features, which are related to naturalness, may also lead to the benefits attained from interacting with nature.
Gossamer-1: Mission concept and technology for a controlled deployment of gossamer spacecraft
NASA Astrophysics Data System (ADS)
Seefeldt, Patric; Spietz, Peter; Sproewitz, Tom; Grundmann, Jan Thimo; Hillebrandt, Martin; Hobbie, Catherin; Ruffer, Michael; Straubel, Marco; Tóth, Norbert; Zander, Martin
2017-01-01
Gossamer structures for innovative space applications, such as solar sails, require technology that allows their controlled and thereby safe deployment. Before employing such technology for a dedicated science mission, it is desirable, if not necessary, to demonstrate its reliability with a Technology Readiness Level (TRL) of six or higher. The aim of the work presented here is to provide reliable technology that enables the controlled deployment and verification of its functionality with various laboratory tests, thereby qualifying the hardware for a first demonstration in low Earth orbit (LEO). The development was made in the Gossamer-1 project of the German Aerospace Center (DLR). This paper provides an overview of the Gossamer-1 mission and hardware development. The system is designed based on the requirements of a technology demonstration mission. The design rests on a crossed boom configuration with triangular sail segments. Employing engineering models, all aspects of the deployment were tested under ambient environment. Several components were also subjected to environmental qualification testing. An innovative stowing and deployment strategy for a controlled deployment, as well as the designs of the bus system, mechanisms and electronics are described. The tests conducted provide insights into the deployment process and allow a mechanical characterization of that deployment process, in particular the measurement of the deployment forces. Deployment on system level could be successfully demonstrated to be robust and controllable. The deployment technology is on TRL four approaching level five, with a qualification model for environmental testing currently being built.
Economic vulnerability to sea-level rise along the northern U.S. Gulf Coast
Thatcher, Cindy A.; Brock, John C.; Pendleton, Elizabeth A.
2013-01-01
The northern Gulf of Mexico coast of the United States has been identified as highly vulnerable to sea-level rise, based on a combination of physical and societal factors. Vulnerability of human populations and infrastructure to projected increases in sea level is a critical area of uncertainty for communities in the extremely low-lying and flat northern gulf coastal zone. A rapidly growing population along some parts of the northern Gulf of Mexico coastline is further increasing the potential societal and economic impacts of projected sea-level rise in the region, where observed relative rise rates range from 0.75 to 9.95 mm per year on the Gulf coasts of Texas, Louisiana, Mississippi, Alabama, and Florida. A 1-m elevation threshold was chosen as an inclusive designation of the coastal zone vulnerable to relative sea-level rise, because of uncertainty associated with sea-level rise projections. This study applies a Coastal Economic Vulnerability Index (CEVI) to the northern Gulf of Mexico region, which includes both physical and economic factors that contribute to societal risk of impacts from rising sea level. The economic variables incorporated in the CEVI include human population, urban land cover, economic value of key types of infrastructure, and residential and commercial building values. The variables are standardized and combined to produce a quantitative index value for each 1-km coastal segment, highlighting areas where human populations and the built environment are most at risk. This information can be used by coastal managers as they allocate limited resources for ecosystem restoration, beach nourishment, and coastal-protection infrastructure. The study indicates a large amount of variability in index values along the northern Gulf of Mexico coastline, and highlights areas where long-term planning to enhance resiliency is particularly needed.
Carroll-Scott, Amy; Gilstad-Hayden, Kathryn; Rosenthal, Lisa; Peters, Susan M.; McCaslin, Catherine; Joyce, Rebecca; Ickovics, Jeannette R.
2014-01-01
Obesity prevalence among US children and adolescents has tripled in the past three decades. Consequently, dramatic increases in chronic disease incidence are expected, particularly among populations already experiencing health disparities. Recent evidence identifies characteristics of “obesogenic” neighborhood environments that affect weight and weight-related behaviors. This study aimed to examine associations between built, socioeconomic, and social characteristics of a child’s residential environment on body mass index (BMI), diet, and physical activity. We focused on pre-adolescent children living in New Haven, Connecticut to better understand neighborhood environments’ contribution to persistent health disparities. Participants were 1048 fifth and sixth grade students who completed school-based health surveys and physical measures in fall 2009. Student data were linked to US Census, parks, retailer, and crime data. Analyses were conducted using multilevel modeling. Property crimes and living further from a grocery store were associated with higher BMI. Students living within a 5-min walk of a fast food outlet had higher BMI, and those living in a tract with higher density of fast food outlets reported less frequent healthy eating and more frequent unhealthy eating. Students’ reported perceptions of access to parks, playgrounds, and gyms were associated with more frequent healthy eating and exercise. Students living in more affluent neighborhoods reported more frequent healthy eating, less unhealthy eating, and less screen time. Neighborhood social ties were positively associated with frequency of exercise. In conclusion, distinct domains of neighborhood environment characteristics were independently related to children’s BMI and health behaviors. Findings link healthy behaviors with built, social, and socioeconomic environment assets (access to parks, social ties, affluence), and unhealthy behaviors with built environment inhibitors (access to fast food outlets), suggesting neighborhood environments are an important level at which to intervene to prevent childhood obesity and its adverse consequences. PMID:23642646
Built Environment and Elderly Population Health: A Comprehensive Literature Review
Garin, Noe; Olaya, Beatriz; Miret, Marta; Ayuso-Mateos, Jose Luis; Power, Michael; Bucciarelli, Paola; Haro, Josep Maria
2014-01-01
Global population aging over recent years has been linked to poorer health outcomes and higher healthcare expenditure. Policies focusing on healthy aging are currently being developed but a complete understanding of health determinants is needed to guide these efforts. The built environment and other external factors have been added to the International Classification of Functioning as important determinants of health and disability. Although the relationship between the built environment and health has been widely examined in working age adults, research focusing on elderly people is relatively recent. In this review, we provide a comprehensive synthesis of the evidence on the built environment and health in the elderly. PMID:25356084
Blacksher, Erika; Lovasi, Gina S
2012-03-01
Built environment characteristics have been linked to health outcomes and health disparities. However, the effects of an environment on behavior may depend on human perception, interpretation, motivation, and other forms of human agency. We draw on epidemiological and ethical concepts to articulate a critique of research on the built environment and physical activity. We identify problematic assumptions and enumerate both scientific and ethical reasons to incorporate subjective perspectives and public engagement strategies into built environment research and interventions. We maintain that taking agency seriously is essential to the pursuit of health equity and the broader demands of social justice in public health, an important consideration as studies of the built environment and physical activity increasingly focus on socially disadvantaged communities. Attention to how people understand their environment and navigate competing demands can improve the scientific value of ongoing efforts to promote active living and health, while also better fulfilling our ethical obligations to the individuals and communities whose health we strive to protect. Copyright © 2011 Elsevier Ltd. All rights reserved.
Character Reading Fluency, Word Segmentation Accuracy, and Reading Comprehension in L2 Chinese
ERIC Educational Resources Information Center
Shen, Helen H.; Jiang, Xin
2013-01-01
This study investigated the relationships between lower-level processing and general reading comprehension among adult L2 (second-language) beginning learners of Chinese, in both target and non-target language learning environments. Lower-level processing in Chinese reading includes the factors of character-naming accuracy, character-naming speed,…
JWST Mirror Technology Development Results
NASA Technical Reports Server (NTRS)
Stahl, H. Philip
2007-01-01
Mirror technology is a critical enabling capability for the James Webb Space Telescope (JWST). JWST requires a Primary Mirror Segment Assembly (PMSA) that can survive launch, deploy and align itself to form a 25 square meter collecting area 6.5 meter diameter primary mirror with a 131 nm rms wavefront error at temperatures less than 50K and provide stable optical performance. At the inception of JWST in 1996, such a capability did not exist. A highly successful technology development program was initiated including the Sub-scale Beryllium Mirror Demonstrator (SBMD) and Advanced Mirror System Demonstrator (AMSD) projects. These projects along with flight program activities have matured and demonstrated mirror technology for JWST. Directly traceable prototypes or flight hardware has been built, tested and operated in a relevant environment. This paper summarizes that technology development effort.
Our Built and Natural Environments
Our Built and Natural Environments summarizes research that shows how development patterns affect the environment and human health, and how certain development patterns can reduce the environmental and human health impacts of development.
Wong, Fiona; Stevens, Denise; O'Connor-Duffany, Kathleen; Siegel, Karen; Gao, Yue
2011-03-07
Novel efforts and accompanying tools are needed to tackle the global burden of chronic disease. This paper presents an approach to describe the environments in which people live, work, and play. Community Health Environment Scan Survey (CHESS) is an empirical assessment tool that measures the availability and accessibility, of healthy lifestyle options lifestyle options. CHESS reveals existing community assets as well as opportunities for change, shaping community intervention planning efforts by focusing on community-relevant opportunities to address the three key risk factors for chronic disease (i.e. unhealthy diet, physical inactivity, and tobacco use). The CHESS tool was developed following a review of existing auditing tools and in consultation with experts. It is based on the social-ecological model and is adaptable to diverse settings in developed and developing countries throughout the world. For illustrative purposes, baseline results from the Community Interventions for Health (CIH) Mexico site are used, where the CHESS tool assessed 583 food stores and 168 restaurants. Comparisons between individual-level survey data from schools and community-level CHESS data are made to demonstrate the utility of the tool in strategically guiding intervention activities. The environments where people live, work, and play are key factors in determining their diet, levels of physical activity, and tobacco use. CHESS is the first tool of its kind that systematically and simultaneously examines how built environments encourage/discourage healthy eating, physical activity, and tobacco use. CHESS can help to design community interventions to prevent chronic disease and guide healthy urban planning. © 2011 Fiona Wong et al.
Bosher, Lee; Dainty, Andrew
2011-01-01
The emerging emphasis on disaster risk reduction has broadened the range of experts whose knowledge must be garnered to resolve complex socio-technical challenges. This paper examines the role and position of the construction sector for addressing these concerns. Specifically, it examines the recursive nature of practices within the built environment, which can be seen as deeply ingraining fragmented approaches to the development process. These, in turn, render the industry a difficult arena within which to enact structural and cultural change. Based on a wide body of literature on resiliency a set of overarching principles are proffered to help inform efforts to overcome some of the barriers to creating a more resilient built environment. It is argued that these principles offer a point of departure for embedding resilience considerations at both project and institutional levels, although real change would demand challenging some of the conventions that currently underpin construction development. © 2011 The Author(s). Disasters © Overseas Development Institute, 2011.
Video shot boundary detection using region-growing-based watershed method
NASA Astrophysics Data System (ADS)
Wang, Jinsong; Patel, Nilesh; Grosky, William
2004-10-01
In this paper, a novel shot boundary detection approach is presented, based on the popular region growing segmentation method - Watershed segmentation. In image processing, gray-scale pictures could be considered as topographic reliefs, in which the numerical value of each pixel of a given image represents the elevation at that point. Watershed method segments images by filling up basins with water starting at local minima, and at points where water coming from different basins meet, dams are built. In our method, each frame in the video sequences is first transformed from the feature space into the topographic space based on a density function. Low-level features are extracted from frame to frame. Each frame is then treated as a point in the feature space. The density of each point is defined as the sum of the influence functions of all neighboring data points. The height function that is originally used in Watershed segmentation is then replaced by inverting the density at the point. Thus, all the highest density values are transformed into local minima. Subsequently, Watershed segmentation is performed in the topographic space. The intuitive idea under our method is that frames within a shot are highly agglomerative in the feature space and have higher possibilities to be merged together, while those frames between shots representing the shot changes are not, hence they have less density values and are less likely to be clustered by carefully extracting the markers and choosing the stopping criterion.
Hierarchical probabilistic Gabor and MRF segmentation of brain tumours in MRI volumes.
Subbanna, Nagesh K; Precup, Doina; Collins, D Louis; Arbel, Tal
2013-01-01
In this paper, we present a fully automated hierarchical probabilistic framework for segmenting brain tumours from multispectral human brain magnetic resonance images (MRIs) using multiwindow Gabor filters and an adapted Markov Random Field (MRF) framework. In the first stage, a customised Gabor decomposition is developed, based on the combined-space characteristics of the two classes (tumour and non-tumour) in multispectral brain MRIs in order to optimally separate tumour (including edema) from healthy brain tissues. A Bayesian framework then provides a coarse probabilistic texture-based segmentation of tumours (including edema) whose boundaries are then refined at the voxel level through a modified MRF framework that carefully separates the edema from the main tumour. This customised MRF is not only built on the voxel intensities and class labels as in traditional MRFs, but also models the intensity differences between neighbouring voxels in the likelihood model, along with employing a prior based on local tissue class transition probabilities. The second inference stage is shown to resolve local inhomogeneities and impose a smoothing constraint, while also maintaining the appropriate boundaries as supported by the local intensity difference observations. The method was trained and tested on the publicly available MICCAI 2012 Brain Tumour Segmentation Challenge (BRATS) Database [1] on both synthetic and clinical volumes (low grade and high grade tumours). Our method performs well compared to state-of-the-art techniques, outperforming the results of the top methods in cases of clinical high grade and low grade tumour core segmentation by 40% and 45% respectively.
SemVisM: semantic visualizer for medical image
NASA Astrophysics Data System (ADS)
Landaeta, Luis; La Cruz, Alexandra; Baranya, Alexander; Vidal, María.-Esther
2015-01-01
SemVisM is a toolbox that combines medical informatics and computer graphics tools for reducing the semantic gap between low-level features and high-level semantic concepts/terms in the images. This paper presents a novel strategy for visualizing medical data annotated semantically, combining rendering techniques, and segmentation algorithms. SemVisM comprises two main components: i) AMORE (A Modest vOlume REgister) to handle input data (RAW, DAT or DICOM) and to initially annotate the images using terms defined on medical ontologies (e.g., MesH, FMA or RadLex), and ii) VOLPROB (VOlume PRObability Builder) for generating the annotated volumetric data containing the classified voxels that belong to a particular tissue. SemVisM is built on top of the semantic visualizer ANISE.1
Accessibility of health clubs for people with mobility disabilities and visual impairments.
Rimmer, James H; Riley, Barth; Wang, Edward; Rauworth, Amy
2005-11-01
We sought to examine the accessibility of health clubs to persons with mobility disabilities and visual impairments. We assessed 35 health clubs and fitness facilities as part of a national field trial of a new instrument, Accessibility Instruments Measuring Fitness and Recreation Environments (AIMFREE), designed to assess accessibility of fitness facilities in the following domains: (1) built environment, (2) equipment, (3) swimming pools, (4) information, (5) facility policies, and (6) professional behavior. All facilities had a low to moderate level of accessibility. Some of the deficiencies concerned specific Americans with Disabilities Act guidelines pertaining to the built environment, whereas other deficiency areas were related to aspects of the facilities' equipment, information, policies, and professional staff. Persons with mobility disabilities and visual impairments have difficulty accessing various areas of fitness facilities and health clubs. AIMFREE is an important tool for increasing awareness of these accessibility barriers for people with disabilities.
Relationship between the neighbourhood built environment and early child development.
Christian, Hayley; Ball, Stephen J; Zubrick, Stephen R; Brinkman, Sally; Turrell, Gavin; Boruff, Bryan; Foster, Sarah
2017-11-01
The relationship between features of the neighbourhood built environment and early child development was investigated using area-level data from the Australian Early Development Census. Overall 9.0% of children were developmentally vulnerable on the Physical Health and Well-being domain, 8.1% on the Social Competence domain and 8.1% on the Emotional Maturity domain. After adjustment for socio-demographic factors, Local Communities with the highest quintile of home yard space had significantly lower odds of developmental vulnerability on the Emotional Maturity domain. Residing in a Local Community with fewer main roads was associated with a decrease in the proportion of children developmentally vulnerable on the Social Competence domain. Overall, sociodemographic factors were more important than aspects of the neighbourhood physical environment for explaining variation between Local Communities in the developmental vulnerability of children. Copyright © 2017 Elsevier Ltd. All rights reserved.
Accessibility of Health Clubs for People with Mobility Disabilities and Visual Impairments
Rimmer, James H.; Riley, Barth; Wang, Edward; Rauworth, Amy
2005-01-01
Objective. We sought to examine the accessibility of health clubs to persons with mobility disabilities and visual impairments. Methods. We assessed 35 health clubs and fitness facilities as part of a national field trial of a new instrument, Accessibility Instruments Measuring Fitness and Recreation Environments (AIMFREE), designed to assess accessibility of fitness facilities in the following domains: (1) built environment, (2) equipment, (3) swimming pools, (4) information, (5) facility policies, and (6) professional behavior. Results. All facilities had a low to moderate level of accessibility. Some of the deficiencies concerned specific Americans with Disabilities Act guidelines pertaining to the built environment, whereas other deficiency areas were related to aspects of the facilities’ equipment, information, policies, and professional staff. Conclusions. Persons with mobility disabilities and visual impairments have difficulty accessing various areas of fitness facilities and health clubs. AIMFREE is an important tool for increasing awareness of these accessibility barriers for people with disabilities. PMID:16254234
Levels of Nature and Stress Response
2018-01-01
A growing number of studies have shown that visiting green spaces and being exposed to natural environments can reduce psychological stress. A number of questions concerning the effects of natural environments on levels of stress remain including, “Are activities engaged in natural environments more or less beneficial at reducing stress when compared to those done in more urban settings?” This study examined this question from the perspective of “levels of nature”. That is, data on levels of stress were collected from three sites, one site having wilderness-like characteristics, a second site representing a municipal-type park, and a third site representing a built environment (indoor exercise facility) within a city. Data were generated using biophysical markers (cortisol and amylase) and a psychological measure within a pre- and post-visit format. Findings suggest that visiting natural environments can be beneficial in reducing both physical and psychological stress levels, with visitors to a natural environment reporting significantly lower levels of stress than their counterparts visiting a more urbanized outdoor setting or indoor exercise facility. PMID:29772763
EPAseeks applications for research on how pollution affects human health in the context of the total environment – built, natural, and social environments interacting together with inherent characteristics and interactions.
Assessing the Nexus of Built, Natural, and Social Environments and Public Health Outcomes
NASA Astrophysics Data System (ADS)
Archer, R.; Alexander, S.; Douglas, J.
2017-12-01
This study investigates community-related environmental justice concerns and chemical and non-chemical health stressors from built, natural, and social environments in Southeast Los Angeles (SELA) County and East Oakland, California. The geographical distribution of health outcomes is related to the built and natural environments, as well as impacts from the social environment. A holistic systems view is important in assessing healthy behaviors within a community, because they do not occur in isolation. Geospatial analysis will be performed to integrate a total environment framework and explore the spatial patterns of exposure to chemical and non-chemical stressors and access to health-promoting environments. Geographic Information Systems (GIS) analysis using primary and secondary existing data will be performed to determine how social environments impact exposure to chemical health stressors and access to health-promoting built and natural environments. This project will develop a comprehensive list of health-promoting built and natural environments (e.g., parks and community gardens) and polluting sites (e.g., shipping ports and sources of pollution not included in federal regulatory databases) in East Oakland and SELA. California Department of Public Health and U.S. Decennial Census data will also be included for geospatial analysis to overlay the distribution of air pollution-related morbidities (e.g. asthma, diabetes, and cancer) and access to health-promoting built and natural environments and related community assets, exposure to polluting industries, social disorganization, and public health outcomes in the target areas. This research will help identify the spatial and temporal distribution and cumulative impacts of critical pollution hotspots causing community environmental health impacts. The research team will also map how social environments impact exposure to chemical health stressors and access to health-promoting built and natural environments. The process and outcomes of this research should empower communities and aid decision-makers to integrate environmental justice considerations into public health policies.
Tools for model-building with cryo-EM maps
Terwilliger, Thomas Charles
2018-01-01
There are new tools available to you in Phenix for interpreting cryo-EM maps. You can automatically sharpen (or blur) a map with phenix.auto_sharpen and you can segment a map with phenix.segment_and_split_map. If you have overlapping partial models for a map, you can merge them with phenix.combine_models. If you have a protein-RNA complex and protein chains have been accidentally built in the RNA region, you can try to remove them with phenix.remove_poor_fragments. You can put these together and automatically sharpen, segment and build a map with phenix.map_to_model.
Tools for model-building with cryo-EM maps
DOE Office of Scientific and Technical Information (OSTI.GOV)
Terwilliger, Thomas Charles
There are new tools available to you in Phenix for interpreting cryo-EM maps. You can automatically sharpen (or blur) a map with phenix.auto_sharpen and you can segment a map with phenix.segment_and_split_map. If you have overlapping partial models for a map, you can merge them with phenix.combine_models. If you have a protein-RNA complex and protein chains have been accidentally built in the RNA region, you can try to remove them with phenix.remove_poor_fragments. You can put these together and automatically sharpen, segment and build a map with phenix.map_to_model.
NASA Astrophysics Data System (ADS)
Quattrochi, D.
2012-12-01
The built environment consists of components that have been made by humans at a range of scales from small (e.g., houses, shopping malls) to large (e.g., transportation networks) to highly modified landscapes such as cities. The impacts of climate change on the built environment, therefore, may have a multitude of effects on humans and the land. The impact of climate change may be exacerbated by the interaction of different events that singly may be minor, but together may have a synergistic set of impacts that are significant. Also, there may be feedback mechanisms wherein the built environment, particularly in the form of cities, may affect weather and the climate on local and regional scales. Besides having a host of such interactions, the impacts of climate change on urban areas will likely have thresholds, below which effects are incidental or of mild consequence, but beyond which the effects quickly become major. Hence, a city may be able to cope with prolonged heat waves, but if this is combined with severe drought, the overall result could be significant or even catastrophic, as accelerating demand for energy to cooling taxes water supplies needed both for energy supply and municipal water needs. Moreover, urban areas may be affected by changes in daily and seasonal high or low temperatures or precipitation, which may have a much more prolonged impact than the direct effect of these events. Thus, the cumulative impacts of multiple events may be more severe than those of any single event. Primary hazards include sea level rise and coastal storms, heat waves, intense precipitation, drought, extreme wind events, urban heat islands, and secondary air pollutants, and cold air events including frozen precipitation. Indicators need to be developed to provide a consistent, objective, and transparent overview of major variations in climate impacts, vulnerabilities, adaptation, and mitigation activities. Overall, indicators of climate change on the built environment should: 1) provide meaningful, authoritative climate-relevant measures about the status, rates, and trends of key physical, ecological, and societal variables and values to inform decisions on management, research, and education at regional to national scales; 2) identify climate-related conditions and impacts to help develop effective mitigation and adaptation measures and reduce costs of management; and 3) document and communicate the climate-driven dynamic nature and condition of Earth's systems and societies, and provide a coordinated. This presentation will provide an overview of possible climate impacts on the built environment. Also, given that spatial analysis and remote sensing techniques will be of paramount importance in assessing these impacts and in preparing adaptation strategies, the presentation will provide examples of how these techniques can be used to identify potential impacts of climate change on the built environment.
Active Travel by Built Environment and Lifecycle Stage: Case Study of Osaka Metropolitan Area.
Waygood, E Owen D; Sun, Yilin; Letarte, Laurence
2015-12-15
Active travel can contribute to physical activity achieved over a day. Previous studies have examined active travel associated with trips in various western countries, but few studies have examined this question for the Asian context. Japan has high levels of cycling, walking and public transport, similar to The Netherlands. Most studies have focused either on children or on adults separately, however, having children in a household will change the travel needs and wants of that household. Thus, here a household lifecycle stage approach is applied. Further, unlike many previous studies, the active travel related to public transport is included. Lastly, further to examining whether the built environment has an influence on the accumulation of active travel minutes, a binary logistic regression examines the built environment's influence on the World Health Organization's recommendations of physical activity. The findings suggest that there is a clear distinction between the urbanized centers and the surrounding towns and unurbanized areas. Further, active travel related to public transport trips is larger than pure walking trips. Females and children are more likely to achieve the WHO recommendations. Finally, car ownership is a strong negative influence.
Li, Qing; Qiao, Fengxiang; Yu, Lei; Shi, Junqing
2018-06-01
Vehicle interior noise functions at the dominant frequencies of 500 Hz below and around 800 Hz, which fall into the bands that may impair hearing. Recent studies demonstrated that freeway commuters are chronically exposed to vehicle interior noise, bearing the risk of hearing impairment. The interior noise evaluation process is mostly conducted in a laboratory environment. The test results and the developed noise models may underestimate or ignore the noise effects from dynamic traffic and road conditions and configuration. However, the interior noise is highly associated with vehicle maneuvering. The vehicle maneuvering on a freeway weaving segment is more complex because of its nature of conflicting areas. This research is intended to explore the risk of the interior noise exposure on freeway weaving segments for freeway commuters and to improve the interior noise estimation by constructing a decision tree learning-based noise exposure dose (NED) model, considering weaving segment designs and engine operation. On-road driving tests were conducted on 12 subjects on State Highway 288 in Houston, Texas. On-board Diagnosis (OBD) II, a smartphone-based roughness app, and a digital sound meter were used to collect vehicle maneuvering and engine information, International Roughness Index, and interior noise levels, respectively. Eleven variables were obtainable from the driving tests, including the length and type of a weaving segment, serving as predictors. The importance of the predictors was estimated by their out-of-bag-permuted predictor delta errors. The hazardous exposure level of the interior noise on weaving segments was quantified to hazard quotient, NED, and daily noise exposure level, respectively. Results showed that the risk of hearing impairment on freeway is acceptable; the interior noise level is the most sensitive to the pavement roughness and is subject to freeway configuration and traffic conditions. The constructed NED model shows high predictive power (R = 0.93, normalized root-mean-square error [NRMSE] < 6.7%). Vehicle interior noise is usually ignored in the public, and its modeling and evaluation are generally conducted in a laboratory environment, regardless of the interior noise effects from dynamic traffic, road conditions, and road configuration. This study quantified the interior exposure dose on freeway weaving segments, which provides freeway commuters with a sense of interior noise exposure risk. In addition, a bagged decision tree-based interior noise exposure dose model was constructed, considering vehicle maneuvering, vehicle engine operational information, pavement roughness, and weaving segment configuration. The constructed model could significantly improve the interior noise estimation for road engineers and vehicle manufactures.
JWST center of curvature test method and results
NASA Astrophysics Data System (ADS)
Saif, Babak; Chaney, David; Greenfield, Perry; Van Gorkom, Kyle; Brooks, Keira; Hack, Warren; Bluth, Marcel; Bluth, Josh; Sanders, James; Smith, Koby; Carey, Larkin; Chaung, Sze; Keski-Kuha, Ritva; Feinberg, Lee; Tournois, Severine; Smith, W. Scott; Kradinov, Vladimir
2017-09-01
The James Webb Space Telescope (JWST) recently saw the completion of the assembly process for the Optical Telescope Element and Integrated Science Instrument Module (OTIS). This integration effort was performed at Goddard Space Flight Center (GSFC) in Greenbelt, Maryland. In conjunction with this assembly process a series of vibration and acoustic tests were performed. To help assure the telescope's primary mirror was not adversely impacted by this environmental testing an optical center of curvature (CoC) test was performed to measure changes in the mirror's optical performance. The primary is a 6.5 meter diameter mirror consisting of 18 individual hexagonal segments. Each segment is an off-axis asphere. There are a total of three prescriptions repeated six times each. As part of the CoC test each segment was individually measured using a high-speed interferometer (HSI) designed and built specifically for this test. This interferometer is capable of characterizing both static and dynamic characteristics of the mirrors. The latter capability was used, with the aid of a vibration stinger applying a low-level input force, to measure the dynamic characteristic changes of the PM backplane structure. This paper describes the CoC test setup, an innovative alignment method, and both static and dynamic test results.
Bionic Control of Cheetah Bounding with a Segmented Spine.
Wang, Chunlei; Wang, Shigang
2016-01-01
A cheetah model is built to mimic real cheetah and its mechanical and dimensional parameters are derived from the real cheetah. In particular, two joints in spine and four joints in a leg are used to realize the motion of segmented spine and segmented legs which are the key properties of the cheetah bounding. For actuating and stabilizing the bounding gait of cheetah, we present a bioinspired controller based on the state-machine. The controller mainly mimics the function of the cerebellum to plan the locomotion and keep the body balance. The haptic sensor and proprioception system are used to detect the trigger of the phase transition. Besides, the vestibular modulation could perceive the pitching angle of the trunk. At last, the cerebellum acts as the CPU to operate the information from the biological sensors. In addition, the calculated results are transmitted to the low-level controller to actuate and stabilize the cheetah bounding. Moreover, the delay feedback control method is employed to plan the motion of the leg joints to stabilize the pitching motion of trunk with the stability criterion. Finally, the cyclic cheetah bounding with biological properties is realized. Meanwhile, the stability and dynamic properties of the cheetah bounding gait are analyzed elaborately.
SuperSegger: robust image segmentation, analysis and lineage tracking of bacterial cells.
Stylianidou, Stella; Brennan, Connor; Nissen, Silas B; Kuwada, Nathan J; Wiggins, Paul A
2016-11-01
Many quantitative cell biology questions require fast yet reliable automated image segmentation to identify and link cells from frame-to-frame, and characterize the cell morphology and fluorescence. We present SuperSegger, an automated MATLAB-based image processing package well-suited to quantitative analysis of high-throughput live-cell fluorescence microscopy of bacterial cells. SuperSegger incorporates machine-learning algorithms to optimize cellular boundaries and automated error resolution to reliably link cells from frame-to-frame. Unlike existing packages, it can reliably segment microcolonies with many cells, facilitating the analysis of cell-cycle dynamics in bacteria as well as cell-contact mediated phenomena. This package has a range of built-in capabilities for characterizing bacterial cells, including the identification of cell division events, mother, daughter and neighbouring cells, and computing statistics on cellular fluorescence, the location and intensity of fluorescent foci. SuperSegger provides a variety of postprocessing data visualization tools for single cell and population level analysis, such as histograms, kymographs, frame mosaics, movies and consensus images. Finally, we demonstrate the power of the package by analyzing lag phase growth with single cell resolution. © 2016 John Wiley & Sons Ltd.
As-built design specification for MISMAP
NASA Technical Reports Server (NTRS)
Brown, P. M.; Cheng, D. E.; Tompkins, M. A. (Principal Investigator)
1981-01-01
The MISMAP program, which is part of the CLASFYT package, is described. The program is designed to compare classification values with ground truth values for a segment and produce a comparison map and summary table.
Breaking It Down: Knowledge Transfer in a Multimedia Learning Environment
ERIC Educational Resources Information Center
Mariano, Gina
2014-01-01
The purpose of this study was to determine the effects of segmentation on immediate and delayed recall and transfer in a multimedia learning environment. The independent variables of segmentation and non-segmentation, as well as immediate and delayed transfer assessments, were manipulated to assess the effects of segmentation on the participant's…
Segmentation and Quantitative Analysis of Epithelial Tissues.
Aigouy, Benoit; Umetsu, Daiki; Eaton, Suzanne
2016-01-01
Epithelia are tissues that regulate exchanges with the environment. They are very dynamic and can acquire virtually any shape; at the cellular level, they are composed of cells tightly connected by junctions. Most often epithelia are amenable to live imaging; however, the large number of cells composing an epithelium and the absence of informatics tools dedicated to epithelial analysis largely prevented tissue scale studies. Here we present Tissue Analyzer, a free tool that can be used to segment and analyze epithelial cells and monitor tissue dynamics.
Perceived Environmental Factors Associated with Obesity in Libyan Men and Women
Papadopoulos, Chris
2018-01-01
Background: There is a lack of research pertaining to the links between built environment attributes and obesity in adults in the Eastern Mediterranean Region. In the Libyan context, no previous studies have been conducted to investigate this relationship. Therefore, the aim of this study was to examine associations between perceived neighbourhood built environmental attributes and obesity among Libyan men and women. The prevalence of overweight and obesity was also assessed. Methods: A cross-sectional study design was used for the population-based survey in Benghazi, Libya. A multi-stage cluster sampling technique was used to select Libyan adults from the Benghazi electoral register. The Physical Activity Neighbourhood Environment Scale (PANES) was used to measure participants’ perception of neighbourhood environmental factors. Using the Tanita BC-601 Segmental Body Composition Monitor and a portable stadiometer, anthropometric measurements were taken at a mutually agreeable place by qualified nurses. Results: Four hundred and one Libyan adults were recruited (78% response rate). Participants were aged 20–65 years, 63% were female, and all had lived in Benghazi for over 10 years. The prevalence of obesity and overweight was 42.4% and 32.9% respectively. A significant association was found between BMI and 6 neighbourhood environment attributes, specifically: street connectivity, unsafe environment and committing crimes at night, and neighbourhood aesthetics. For men only, these were: access to public transport, access to recreational facilities, and unsafe environment and committing crimes during the day. The attribute ‘residential density zones’ was only significant for women. Conclusions: The study suggests that Libyan people are at risk of living in neighbourhoods with unsupportive environmental features of physical activity, which are likely to promote obesity of both genders. The findings of this study could inform Libyan health policies about interventions in the obesogenic environments that might slow the obesity epidemic and contain the public health crisis. This study suggests that further research is needed, within the Libyan context, to explore the impact of the neighbourhood environment attributes on contributing to increased obesity. PMID:29425161
Soril, Lesley J J; Leggett, Laura E; Lorenzetti, Diane L; Silvius, James; Robertson, Duncan; Mansell, Lynne; Holroyd-Leduc, Jayna; Noseworthy, Tom W; Clement, Fiona M
2014-01-01
To determine the effectiveness of built environment interventions in managing behavioural and psychological symptoms of dementia (BPSD) among residents in long-term care settings. Systematic review of literature published from 1995-2013. Studies were included if they: were randomized controlled trials, quasi-experimental trials, or comparative cohort studies; were in long-term or specialized dementia care; included residents with dementia and BPSD; and examined effectiveness of a built environment intervention on frequency and/or severity of BPSD. Quality of included studies was assessed using the Downs and Black Checklist. Study design, patient population, intervention, and outcomes were extracted and narratively synthesized. Five low to moderate quality studies were included. Three categories of interventions were identified: change/redesign of existing physical space, addition of physical objects to environment, and type of living environment. One of the two studies that examined change/redesign of physical spaces reported improvements in BPSD. The addition of physical objects to an existing environment (n = 1) resulted in no difference in BPSD between treatment and control groups. The two studies that examined relocation to a novel living environment reported decreased or no difference in the severity and/or frequency of BPSD post-intervention. No studies reported worsening of BPSD following a built environment intervention. The range of built environment interventions is broad, as is the complex and multi-dimensional nature of BPSD. There is inconclusive evidence to suggest a built environment intervention which is clinically superior in long-term care settings. Further high-quality methodological and experimental studies are required to demonstrate the feasibility and effectiveness of such interventions.
Bouye, Karen E.; Skillen, Elizabeth; Lee, Charles; Whitehead, LaToria; Rashid, Jamila R.
2011-01-01
In 2006, the Federal Collaboration on Health Disparities Research (FCHDR) identified the built environment as a priority for eliminating health disparities, and charged the Built Environment Workgroup with identifying ways to eliminate health disparities and improve health outcomes. Despite extensive research and the development of a new conceptual health factors framework, gaps in knowledge exist in areas such as disproportionate environmental and community hazards, individual and cumulative risks, and other factors. The FCHDR provides the structure and opportunity to mobilize and partner with built environment stakeholders, federal partners, and interest groups to develop tools, practices, and policies for translating and disseminating the best available science to reduce health disparities. PMID:21389288
Hutch, Daniel J; Bouye, Karen E; Skillen, Elizabeth; Lee, Charles; Whitehead, Latoria; Rashid, Jamila R
2011-04-01
In 2006, the Federal Collaboration on Health Disparities Research (FCHDR) identified the built environment as a priority for eliminating health disparities, and charged the Built Environment Workgroup with identifying ways to eliminate health disparities and improve health outcomes. Despite extensive research and the development of a new conceptual health factors framework, gaps in knowledge exist in areas such as disproportionate environmental and community hazards, individual and cumulative risks, and other factors. The FCHDR provides the structure and opportunity to mobilize and partner with built environment stakeholders, federal partners, and interest groups to develop tools, practices, and policies for translating and disseminating the best available science to reduce health disparities.
Interactive browsing of 3D environment over the Internet
NASA Astrophysics Data System (ADS)
Zhang, Cha; Li, Jin
2000-12-01
In this paper, we describe a system for wandering in a realistic environment over the Internet. The environment is captured by the concentric mosaic, compressed via the reference block coder (RBC), and accessed and delivered over the Internet through the virtual media (Vmedia) access protocol. Capturing the environment through the concentric mosaic is easy. We mount a camera at the end of a level beam, and shoot images as the beam rotates. The huge dataset of the concentric mosaic is then compressed through the RBC, which is specifically designed for both high compression efficiency and just-in-time (JIT) rendering. Through the JIT rendering function, only a portion of the RBC bitstream is accessed, decoded and rendered for each virtual view. A multimedia communication protocol -- the Vmedia protocol, is then proposed to deliver the compressed concentric mosaic data over the Internet. Only the bitstream segments corresponding to the current view are streamed over the Internet. Moreover, the delivered bitstream segments are managed by a local Vmedia cache so that frequently used bitstream segments need not be streamed over the Internet repeatedly, and the Vmedia is able to handle a RBC bitstream larger than its memory capacity. A Vmedia concentric mosaic interactive browser is developed where the user can freely wander in a realistic environment, e.g., rotate around, walk forward/backward and sidestep, even under a tight bandwidth of 33.6 kbps.
NASA Astrophysics Data System (ADS)
Yucel, M.; Sueishi, T.; Inagaki, A.; Kanda, M.
2017-12-01
`Great Garuda' project is an eagle-shaped offshore structure with 17 artificial islands. This project has been designed for the coastal protection and land reclamation of Jakarta due to catastrophic flooding in the city. It offers an urban generation for 300.000 inhabitants and 600.000 workers in addition to its water safety goal. A broad coalition of Indonesian scientists has criticized the project for being negative impacts on the surrounding environment. Despite the vast research by Indonesian scientist on maritime environment, studies on wind and thermal environment over built-up area are still lacking. However, the construction of the various islands off the coast may result changes in wind patterns and thermal environment due to the alteration of the coastline and urbanization in the Jakarta Bay. Therefore, it is important to understand the airflow within the urban canopy in case of unpredictable gust events. These gust events may occur through the closely-packed high-rise buildings and pedestrians may be harmed from such gusts. Accordingly, we used numerical simulations to investigate the impact of the sea wall and the artificial islands over built-up area and, the intensity of wind gusts at the pedestrian level. Considering the fact that the size of turbulence organized structure sufficiently large computational domain is required. Therefore, a 19.2km×4.8km×1.0 km simulation domain with 2-m resolution in all directions was created to explicitly resolve the detailed shapes of buildings and the flow at the pedestrian level. This complex computation was accomplished by implementing a large-eddy simulation (LES) model. Two case studies were conducted considering the effect of realistic surface roughness and upward heat flux. Case_1 was conducted based on the current built environment and Case_2 for investigating the effect of the project on the chosen coastal region of the city. Fig.1 illustrates the schematic of the large-eddy simulation domains of two cases with and without Great Garuda Sea Wall and 17 artificial islands. 3D model of Great Garuda is shown in Fig.2. In addition to the cases mentioned above, the simulation will be generated assigning more realistic heat flux outputs from energy balance model and, inflow boundary conditions coupling with mesoscale model (Weather Research and Forecast model).
Swami, Viren; Barron, David; Furnham, Adrian
2018-03-01
Five studies were conducted to understand the impact of nature exposure on body image. In three studies using different designs and outcome measures, British university students were exposed to photographs of natural or built environments. Results indicated that exposure to images of natural, but not built, environments resulted in improved state body image. In Study 4, British community participants went on a walk in a natural or built environment, with results indicating that the walk in a natural environment resulted in significantly higher state body appreciation, whereas the walk in a built environment resulted in significantly lower scores. In Study 5, British participants were recruited as they were entering a designed green space on their own volition. Results indicated that spending time in the green space led to improved state body appreciation. These results indicate that exposure to isomorphic or in-situ natural environments has positive effects on state body image. Copyright © 2017 Elsevier Ltd. All rights reserved.
Democratizing Authority in the Built Environment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Andersen, Michael P; Kolb, John; Chen, Kaifei
Operating systems and applications in the built environment have relied upon central authorization and management mechanisms which restrict their scalability, especially with respect to administrative overhead. We propose a new set of primitives encompassing syndication, security, and service execution that unifies the management of applications and services across the built environment, while enabling participants to individually delegate privilege across multiple administrative domains with no loss of security or manageability. We show how to leverage a decentralized authorization syndication platform to extend the design of building operating systems beyond the single administrative domain of a building. The authorization system leveraged ismore » based on blockchain smart contracts to permit decentralized and democratized delegation of authorization without central trust. Upon this, a publish/subscribe syndication tier and a containerized service execution environment are constructed. Combined, these mechanisms solve problems of delegation, federation, device protection and service execution that arise throughout the built environment. We leverage a high-fidelity city-scale emulation to verify the scalability of the authorization tier, and briefly describe a prototypical democratized operating system for the built environment using this foundation.« less
The Built Environment and Child Health: An Overview of Current Evidence.
Gascon, Mireia; Vrijheid, Martine; Nieuwenhuijsen, Mark J
2016-09-01
Urbanization and the shaping of the built environment have provided a number of socioeconomic benefits, but they have also brought unwanted side effects on health. We aimed to review the current epidemiological evidence of the associations between the built environment, closely related exposures, and child health. We focused on growth and obesity, neuropsychological development, and respiratory and immune health. We used existing review articles and supplemented these with relevant work published and not included in existing reviews. The present review shows that there is good evidence for an association between air pollution and fetal growth restriction and respiratory health, whereas for other exposure and outcome combinations, further evidence is needed. Future studies should make efforts to integrate the different built environment features and to include the evaluation of environments other than home, as well as accessibility, qualitative and perception assessment of the built environment, and, if possible, with improved and standardized tools to facilitate comparability between studies. Efforts are also needed to conduct longitudinal and intervention studies and to understand potential mechanisms behind the associations observed. Finally, studies in low- and middle-income countries are needed.
Modification to area navigation equipment for instrument two-segment approaches
NASA Technical Reports Server (NTRS)
1975-01-01
A two-segment aircraft landing approach concept utilizing an area random navigation (RNAV) system to execute the two-segment approach and eliminate the requirements for co-located distance measuring equipment (DME) was investigated. This concept permits non-precision approaches to be made to runways not equipped with ILS systems, down to appropriate minima. A hardware and software retrofit kit for the concept was designed, built, and tested on a DC-8-61 aircraft for flight evaluation. A two-segment approach profile and piloting procedure for that aircraft that will provide adequate safety margin under adverse weather, in the presence of system failures, and with the occurrence of an abused approach, was also developed. The two-segment approach procedure and equipment was demonstrated to line pilots under conditions which are representative of those encountered in air carrier service.
Takagi, Daisuke; Kondo, Katsunori
2018-01-01
Background Although reducing socioeconomic inequalities in depression is necessary, their associated factors have rarely been studied. This study aimed to screen the potential contextual factors associated with income-based inequality in older adults’ depression. Methods Using data from the Japan Gerontological Evaluation Study (JAGES) of 2013, we conducted an ecological study covering 77 communities in Japan. Our measures of socioeconomic inequalities in depression were the slope index of inequalities (SII) and the relative index of inequalities (RII) of the prevalence of depressive symptoms across three income levels. We categorized available community-level factors, including socio-demographic factors, social participation, social relationships, subjective changes in the residential area, and the built environment. These indicators were aggregated from individual responses of 51,962 and 52,958 physically independent men and women, respectively, aged 65 years or more. We performed multiple linear regression analyses to explore factors with statistical significance of a two-tailed P-value less than 0.05. Results Factors associated with shallower gradients in depression for men included higher participation in local activities and reception or provision of social support, which did not show significant association among women. Perceived increases in unemployment and economic inequalities were positively associated with larger inequalities in both genders (P < 0.05). The built environment did not indicate any significant association. Conclusions A community environment fostering social activities and relationships might be associated with smaller income-based inequalities in depression. There is a need for more deterministic studies for planning of effective community interventions to address socioeconomic inequalities in depression. PMID:29093358
Rothman, Linda; Buliung, Ron; Macarthur, Colin; To, Teresa; Howard, Andrew
2014-02-01
The child active transportation literature has focused on walking, with little attention to risk associated with increased traffic exposure. This paper reviews the literature related to built environment correlates of walking and pedestrian injury in children together, to broaden the current conceptualization of walkability to include injury prevention. Two independent searches were conducted focused on walking in children and child pedestrian injury within nine electronic databases until March, 2012. Studies were included which: 1) were quantitative 2) set in motorized countries 3) were either urban or suburban 4) investigated specific built environment risk factors 5) had outcomes of either walking in children and/or child pedestrian roadway collisions (ages 0-12). Built environment features were categorized according to those related to density, land use diversity or roadway design. Results were cross-tabulated to identify how built environment features associate with walking and injury. Fifty walking and 35 child pedestrian injury studies were identified. Only traffic calming and presence of playgrounds/recreation areas were consistently associated with more walking and less pedestrian injury. Several built environment features were associated with more walking, but with increased injury. Many features had inconsistent results or had not been investigated for either outcome. The findings emphasise the importance of incorporating safety into the conversation about creating more walkable cities.
Hirsch, Jana A; Moore, Kari A; Barrientos-Gutierrez, Tonatiuh; Brines, Shannon J; Zagorski, Melissa A; Rodriguez, Daniel A; Diez Roux, Ana V
2014-11-01
To examine longitudinal associations of the neighborhood built environment with objectively measured body mass index (BMI) and waist circumference (WC) in a geographically and racial/ethnically diverse group of adults. This study used data from 5,506 adult participants in the Multi-Ethnic Study of Atherosclerosis, aged 45-84 years in 2000 (baseline). BMI and WC were assessed at baseline and four follow-up visits (median follow-up 9.1 years). Time-varying built environment measures (population density, land-use, destinations, bus access, and street characteristics) were created using Geographic Information Systems. Principal components analysis was used to derive composite scores for three built environment factors. Fixed-effects models, tightly controlling for all time-invariant characteristics, estimated associations between change in the built environment, and change in BMI and WC. Increases in the intensity of development (higher density of walking destinations and population density, and lower percent residential) were associated with less pronounced increases or decreases over time in BMI and WC. Changes in connected retail centers (higher percent retail, higher street connectivity) and public transportation (distance to bus) were not associated with changes in BMI or WC. Longitudinal changes in the built environment, particularly increased density, are associated with decreases in BMI and WC. © 2014 The Obesity Society.
Health and the Built Environment: Exploring Foundations for a New Interdisciplinary Profession
Kent, Jennifer; Thompson, Susan
2012-01-01
The supportive role of the built environment for human health is a growing area of interdisciplinary research, evidence-based policy development, and related practice. Nevertheless, despite closely linked origins, the contemporary professions of public health and urban planning largely operate within the neoliberal framework of academic, political, and policy silos. A reinvigorated relationship between the two is fundamental to building and sustaining an effective “healthy built environment profession.” A recent comprehensive review of the burgeoning literature on healthy built environments identified an emergent theme which we have termed “Professional Development.” This literature relates to the development of relationships between health and built environment professionals. It covers case studies illustrating good practice models for policy change, as well as ways professionals can work to translate research into policy. Intertwined with this empirical research is a dialogue on theoretical tensions emerging as health and built environment practitioners and researchers seek to establish mutual understanding and respect. The nature of evidence required to justify policy change, for example, has surfaced as an area of asynchrony between accepted disciplinary protocols. Our paper discusses this important body of research with a view to initiating and supporting the ongoing development of an interdisciplinary profession of healthy planning. PMID:23028393
Identifying research needs for wheelchair transfers in the built environment.
Crytzer, Theresa Marie; Cooper, Rory; Jerome, Genevieve; Koontz, Alicia
2017-02-01
The purpose of this study is to describe the results of focus groups held during the Independent Wheelchair Transfer (IWT) Workgroup. The aims were to facilitate exchange of ideas on (1) the impact of the built environment on the wheelchair transfer process within the community (i.e. moving from wheelchair to and from other surfaces (e.g. furniture, toilet seat, bath bench, car seat) to participate in daily activities), (2) wheelchair users' needs during transfers in the built environment, and (3) future research directions. Live web-based conferencing using Adobe Connect technology (Clarix Technologies, Inc., Pittsford, NY) was utilized to conduct three focus groups composed of experts in the field of assistive technology. Investigators independently reviewed focus group meeting transcripts and used qualitative methods to identify main themes. Thirty-one experts in assistive technology and related fields participated in focus groups. Nine main themes were found including the effect of transfer skills training, space considerations in the built environment, wheelchair configuration, and the interaction between the built environment, user preferences, and transfer techniques. All groups raised issues about the transfer process in areas of the built environment with limited access, the effect of wheelchair users' transfer techniques, and user preferences during transfers. The area of independent transfers is multi-faceted and several factors require consideration when contemplating environmental changes to improve accessibility for wheelchair users. Obvious opportunity exists for research which could lead to advances in transfer technology, environments, and techniques for wheelchair users. Implications for Rehabilitation Tremendous opportunities for research collaborations in the field of assistive technology: To develop new terminology to describe wheelchair transfers. To improve the design of the built environment for wheelchair users. To investigate wheelchair transfer training techniques.
Johansson, Maria; Brunt, David
2012-04-01
The primary aim of the present study was to investigate if methods derived from environmental psychology can be used to study the qualities of the physical environment of supported housing facilities for persons with psychiatric disabilities. Three units of analysis were selected: the private area, the common indoor area, and the outdoor area. Expert assessments of 110 features of the physical environment in these units and semantic environmental description of the visual experience of them consistently showed that purpose-built supported housing facilities had more physical features important for high quality residential environments than the non-purpose-built supported housing facilities. The employed methods were thus seen to be able to describe and discriminate between qualities in the physical environment of supported housing facilities. Suggestions for the development of tools for the assessment of the physical environment in supported housing are made.
Rhodes, Ryan E; Saelens, Brian E; Sauvage-Mar, Claire
2018-05-16
Few people in most developed nations engage in regular physical activity (PA), despite its well-established health benefits. Socioecological models highlight the potential interaction of multiple factors from policy and the built environment to individual social cognition in explaining PA. The purpose of this review was to appraise this interaction tenet of the socioecological model between the built environment and social cognition to predict PA. Eligible studies had to have been published in peer-reviewed journals in the English language, and included any tests of interaction between social cognition and the built environment with PA. Literature searches, concluded in October 2017, used five common databases. Findings were grouped by type of PA outcomes (leisure, transportation, total PA and total moderate-vigorous PA [MVPA]), then grouped by the type of interactions between social cognitive and built environment constructs. The initial search yielded 308 hits, which was reduced to 22 independent studies of primarily high- to medium-quality after screening for eligibility criteria. The interaction tenet of the socioecological model was not supported for overall MVPA and total PA. By contrast, while there was heterogeneity of findings for leisure-time PA, environmental accessibility/convenience interacted with intention, and environmental aesthetics interacted with affective judgments, to predict leisure-time PA. Interactions between the built environment and social cognition in PA for transport are limited, with current results failing to support an effect. The results provide some support for interactive aspects of the built environment and social cognition in leisure-time PA, and thus highlight potential areas for integrated intervention of individual and environmental change.
Lateralization of music processing with noises in the auditory cortex: an fNIRS study.
Santosa, Hendrik; Hong, Melissa Jiyoun; Hong, Keum-Shik
2014-01-01
The present study is to determine the effects of background noise on the hemispheric lateralization in music processing by exposing 14 subjects to four different auditory environments: music segments only, noise segments only, music + noise segments, and the entire music interfered by noise segments. The hemodynamic responses in both hemispheres caused by the perception of music in 10 different conditions were measured using functional near-infrared spectroscopy. As a feature to distinguish stimulus-evoked hemodynamics, the difference between the mean and the minimum value of the hemodynamic response for a given stimulus was used. The right-hemispheric lateralization in music processing was about 75% (instead of continuous music, only music segments were heard). If the stimuli were only noises, the lateralization was about 65%. But, if the music was mixed with noises, the right-hemispheric lateralization has increased. Particularly, if the noise was a little bit lower than the music (i.e., music level 10~15%, noise level 10%), the entire subjects showed the right-hemispheric lateralization: This is due to the subjects' effort to hear the music in the presence of noises. However, too much noise has reduced the subjects' discerning efforts.
Lateralization of music processing with noises in the auditory cortex: an fNIRS study
Santosa, Hendrik; Hong, Melissa Jiyoun; Hong, Keum-Shik
2014-01-01
The present study is to determine the effects of background noise on the hemispheric lateralization in music processing by exposing 14 subjects to four different auditory environments: music segments only, noise segments only, music + noise segments, and the entire music interfered by noise segments. The hemodynamic responses in both hemispheres caused by the perception of music in 10 different conditions were measured using functional near-infrared spectroscopy. As a feature to distinguish stimulus-evoked hemodynamics, the difference between the mean and the minimum value of the hemodynamic response for a given stimulus was used. The right-hemispheric lateralization in music processing was about 75% (instead of continuous music, only music segments were heard). If the stimuli were only noises, the lateralization was about 65%. But, if the music was mixed with noises, the right-hemispheric lateralization has increased. Particularly, if the noise was a little bit lower than the music (i.e., music level 10~15%, noise level 10%), the entire subjects showed the right-hemispheric lateralization: This is due to the subjects' effort to hear the music in the presence of noises. However, too much noise has reduced the subjects' discerning efforts. PMID:25538583
Teaching Creative Thinking through Architectural Design
ERIC Educational Resources Information Center
Jeon, Kijeong; Cotner, Teresa L.
2010-01-01
Art and art education are open to broader definitions in the twenty-first century. It is time that teachers seriously think about including built environment design in K-12 art education. The term "built environment" includes interior design, architecture, landscape architecture, and urban planning. Due to increased exposure to built environment…
A GIS based model for active transportation in the built environment
NASA Astrophysics Data System (ADS)
Addison, Veronica Marie Medina
Obesity and physical inactivity have been major risk factors associated with morbidity and mortality in the United States. Recently, obesity and physical inactivity have been on the rise. Determining connections between this trend and the environment could lead to a built environment that is conducive to healthy, active people. In my previous research, I have studied the built environment and its connection to health. For my dissertation, I build on this fundamental work by incorporating energy, specifically by studying the built environment and its connection to energy expenditures. This research models the built environment and combines this with human energy expenditure information in order to provide a planning tool that allows an individual to actively address health issues, particularly obesity. This research focuses on the design and development of an internet based model that enables individuals to understand their own energy expenditures in relation to their environment. The model will work to find the energy consumed by an individual in their navigation through campus. This is accomplished by using Geographic Information Systems (GIS) to model the campus and using it as the basis for calculating energy expended through active transportation. Using GIS to create the model allows for the incorporation of built environment factors such as elevation and energy expenditures in relation to physical exertion rate. This research will contribute to the long-term solution to the obesity epidemic by creating healthy communities through smart growth and sustainable design. This research provides users with a tool to use in their current environment for their personal and community well being.
Network-level accident-mapping: Distance based pattern matching using artificial neural network.
Deka, Lipika; Quddus, Mohammed
2014-04-01
The objective of an accident-mapping algorithm is to snap traffic accidents onto the correct road segments. Assigning accidents onto the correct segments facilitate to robustly carry out some key analyses in accident research including the identification of accident hot-spots, network-level risk mapping and segment-level accident risk modelling. Existing risk mapping algorithms have some severe limitations: (i) they are not easily 'transferable' as the algorithms are specific to given accident datasets; (ii) they do not perform well in all road-network environments such as in areas of dense road network; and (iii) the methods used do not perform well in addressing inaccuracies inherent in and type of road environment. The purpose of this paper is to develop a new accident mapping algorithm based on the common variables observed in most accident databases (e.g. road name and type, direction of vehicle movement before the accident and recorded accident location). The challenges here are to: (i) develop a method that takes into account uncertainties inherent to the recorded traffic accident data and the underlying digital road network data, (ii) accurately determine the type and proportion of inaccuracies, and (iii) develop a robust algorithm that can be adapted for any accident set and road network of varying complexity. In order to overcome these challenges, a distance based pattern-matching approach is used to identify the correct road segment. This is based on vectors containing feature values that are common in the accident data and the network data. Since each feature does not contribute equally towards the identification of the correct road segments, an ANN approach using the single-layer perceptron is used to assist in "learning" the relative importance of each feature in the distance calculation and hence the correct link identification. The performance of the developed algorithm was evaluated based on a reference accident dataset from the UK confirming that the accuracy is much better than other methods. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.
Construction of language models for an handwritten mail reading system
NASA Astrophysics Data System (ADS)
Morillot, Olivier; Likforman-Sulem, Laurence; Grosicki, Emmanuèle
2012-01-01
This paper presents a system for the recognition of unconstrained handwritten mails. The main part of this system is an HMM recognizer which uses trigraphs to model contextual information. This recognition system does not require any segmentation into words or characters and directly works at line level. To take into account linguistic information and enhance performance, a language model is introduced. This language model is based on bigrams and built from training document transcriptions only. Different experiments with various vocabulary sizes and language models have been conducted. Word Error Rate and Perplexity values are compared to show the interest of specific language models, fit to handwritten mail recognition task.
NASA Astrophysics Data System (ADS)
Kadhim, N. M. S. M.; Mourshed, M.; Bray, M. T.
2015-03-01
Very-High-Resolution (VHR) satellite imagery is a powerful source of data for detecting and extracting information about urban constructions. Shadow in the VHR satellite imageries provides vital information on urban construction forms, illumination direction, and the spatial distribution of the objects that can help to further understanding of the built environment. However, to extract shadows, the automated detection of shadows from images must be accurate. This paper reviews current automatic approaches that have been used for shadow detection from VHR satellite images and comprises two main parts. In the first part, shadow concepts are presented in terms of shadow appearance in the VHR satellite imageries, current shadow detection methods, and the usefulness of shadow detection in urban environments. In the second part, we adopted two approaches which are considered current state-of-the-art shadow detection, and segmentation algorithms using WorldView-3 and Quickbird images. In the first approach, the ratios between the NIR and visible bands were computed on a pixel-by-pixel basis, which allows for disambiguation between shadows and dark objects. To obtain an accurate shadow candidate map, we further refine the shadow map after applying the ratio algorithm on the Quickbird image. The second selected approach is the GrabCut segmentation approach for examining its performance in detecting the shadow regions of urban objects using the true colour image from WorldView-3. Further refinement was applied to attain a segmented shadow map. Although the detection of shadow regions is a very difficult task when they are derived from a VHR satellite image that comprises a visible spectrum range (RGB true colour), the results demonstrate that the detection of shadow regions in the WorldView-3 image is a reasonable separation from other objects by applying the GrabCut algorithm. In addition, the derived shadow map from the Quickbird image indicates significant performance of the ratio algorithm. The differences in the characteristics of the two satellite imageries in terms of spatial and spectral resolution can play an important role in the estimation and detection of the shadow of urban objects.
Health-equity issues related to childhood obesity: a scoping review.
Vargas, Clemencia M; Stines, Elsie M; Granado, Herta S
2017-06-01
The purpose of this scoping review was to determine the health-equity issues that relate to childhood obesity. Health-equity issues related to childhood obesity were identified by analyzing food environment, natural and built environment, and social environment. The authors searched Medline, PubMed, and Web of Science, using the keywords "children" and "obesity." Specific terms for each environment were added: "food desert," "advertising," "insecurity," "price," "processing," "trade," and "school" for food environment; "urban design," "land use," "transportation mode," "public facilities," and "market access" for natural and built environment; and "financial capacity/poverty," "living conditions," "transport access," "remoteness," "social support," "social cohesion," "working practices," "eating habits," "time," and "social norms" for social environment. Inclusion criteria were studies or reports with populations under age 12, conducted in the United States, and published in English in 2005 or later. The final search yielded 39 references (16 for food environment, 11 for built environment, and 12 for social environment). Most food-environment elements were associated with obesity, except food insecurity and food deserts. A natural and built environment that hinders access to physical activity resources and access to healthy foods increased the risk of childhood obesity. Similarly, a negative social environment was associated with childhood obesity. More research is needed on the effects of food production, living conditions, time for shopping, and exercise, as related to childhood obesity. Most elements of food, natural and built, and social-environments were associated with weight in children under age 12, except food insecurity and food deserts. © 2017 American Association of Public Health Dentistry.
NASA Astrophysics Data System (ADS)
N'Diaye, Mamadou; Choquet, Elodie; Egron, Sylvain; Pueyo, Laurent; Leboulleux, Lucie; Levecq, Olivier; Perrin, Marshall D.; Elliot, Erin; Wallace, J. Kent; Hugot, Emmanuel; Marcos, Michel; Ferrari, Marc; Long, Chris A.; Anderson, Rachel; DiFelice, Audrey; Soummer, Rémi
2014-08-01
We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spread function make high-contrast imaging more challenging. In particular the testbed will be compatible with both AFTA-like and ATLAST-like aperture shapes, respectively on-axis monolithic, and on-axis segmented telescopes. The testbed optical design was developed using a novel approach to define the layout and surface error requirements to minimize amplitude induced errors at the target contrast level performance. In this communication we compare the as-built surface errors for each optic to their specifications based on end-to-end Fresnel modelling of the testbed. We also report on the testbed optical and optomechanical alignment performance, coronagraph design and manufacturing, and preliminary first light results.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schalkoff, R.J.
This report summarizes work after 4 years of a 3-year project (no-cost extension of the above-referenced project for a period of 12 months granted). The fourth generation of a vision sensing head for geometric and photometric scene sensing has been built and tested. Estimation algorithms for automatic sensor calibration updating under robot motion have been developed and tested. We have modified the geometry extraction component of the rendering pipeline. Laser scanning now produces highly accurate points on segmented curves. These point-curves are input to a NURBS (non-uniform rational B-spline) skinning procedure to produce interpolating surface segments. The NURBS formulation includesmore » quadrics as a sub-class, thus this formulation allows much greater flexibility without the attendant instability of generating an entire quadric surface. We have also implemented correction for diffuse lighting and specular effects. The QRobot joint level control was extended to a complete semi-autonomous robot control system for D and D operations. The imaging and VR subsystems have been integrated and tested.« less
Solar harvesting by a heterostructured cell with built-in variable width quantum wells
NASA Astrophysics Data System (ADS)
Brooks, W.; Wang, H.; Mil'shtein, S.
2018-02-01
We propose cascaded heterostructured p-i-n solar cells, where inside of the i-region is a set of Quantum Wells (QWs) with variable thicknesses to enhance absorption of different photonic energies and provide quick relaxation for high energy carriers. Our p-i-n heterostructure carries top p-type and bottom n-type 11.3 Å thick AlAs layers, which are doped by acceptors and donor densities up to 1019/cm3. The intrinsic region is divided into 10 segments where each segment carries ten QWs of the same width and the width of the QWs in each subsequent segment gradually increases. The top segment consists of 10 QWs with widths of 56.5Å, followed by a segment with 10 wider QWs with widths of 84.75Å, followed by increasing QW widths until the last segment has 10 QWs with widths of 565Å, bringing the total number of QWs to 100. The QW wall height is controlled by alternating AlAs and GaAs layers, where the AlAs layers are all 11.3Å thick, throughout the entire intrinsic region. Configuration of variable width QWs prescribes sets of energy levels which are suitable for absorption of a wide range of photon energies and will dissipate high electron-hole energies rapidly, reducing the heat load on the solar cell. We expect that the heating of the solar cell will be reduced by 8-11%, enhancing efficiency. The efficiency of the designed solar cell is 43.71%, the Fill Factor is 0.86, the density of short circuit current (ISC) will not exceed 338 A/m2 and the open circuit voltage (VOC) is 1.51V.
NASA Astrophysics Data System (ADS)
Wodajo, Bikila Teklu
Every year, coastal disasters such as hurricanes and floods claim hundreds of lives and severely damage homes, businesses, and lifeline infrastructure. This research was motivated by the 2005 Hurricane Katrina disaster, which devastated the Mississippi and Louisiana Gulf Coast. The primary objective was to develop a geospatial decision-support system for extracting built-up surfaces and estimating disaster impacts using spaceborne remote sensing satellite imagery. Pre-Katrina 1-m Ikonos imagery of a 5km x 10km area of Gulfport, Mississippi, was used as source data to develop the built-up area and natural surfaces or BANS classification methodology. Autocorrelation of 0.6 or higher values related to spectral reflectance values of groundtruth pixels were used to select spectral bands and establish the BANS decision criteria of unique ranges of reflectance values. Surface classification results using GeoMedia Pro geospatial analysis for Gulfport sample areas, based on BANS criteria and manually drawn polygons, were within +/-7% of the groundtruth. The difference between the BANS results and the groundtruth was statistically not significant. BANS is a significant improvement over other supervised classification methods, which showed only 50% correctly classified pixels. The storm debris and erosion estimation or SDE methodology was developed from analysis of pre- and post-Katrina surface classification results of Gulfport samples. The SDE severity level criteria considered hurricane and flood damages and vulnerability of inhabited built-environment. A linear regression model, with +0.93 Pearson R-value, was developed for predicting SDE as a function of pre-disaster percent built-up area. SDE predictions for Gulfport sample areas, used for validation, were within +/-4% of calculated values. The damage cost model considered maintenance, rehabilitation and reconstruction costs related to infrastructure damage and community impacts of Hurricane Katrina. The developed models were implemented for a study area along I-10 considering the predominantly flood-induced damages in New Orleans. The BANS methodology was calibrated for 0.6-m QuickBird2 multispectral imagery of Karachi Port area in Pakistan. The results were accurate within +/-6% of the groundtruth. Due to its computational simplicity, the unit hydrograph method is recommended for geospatial visualization of surface runoff in the built-environment using BANS surface classification maps and elevations data. Key words. geospatial analysis, satellite imagery, built-environment, hurricane, disaster impacts, runoff.
Leatherdale, Scott T; Brown, K Stephen; Carson, Valerie; Childs, Ruth A; Dubin, Joel A; Elliott, Susan J; Faulkner, Guy; Hammond, David; Manske, Steve; Sabiston, Catherine M; Laxer, Rachel E; Bredin, Chad; Thompson-Haile, Audra
2014-04-08
Few researchers have the data required to adequately understand how the school environment impacts youth health behaviour development over time. COMPASS is a prospective cohort study designed to annually collect hierarchical longitudinal data from a sample of 90 secondary schools and the 50,000+ grade 9 to 12 students attending those schools. COMPASS uses a rigorous quasi-experimental design to evaluate how changes in school programs, policies, and/or built environment (BE) characteristics are related to changes in multiple youth health behaviours and outcomes over time. These data will allow for the quasi-experimental evaluation of natural experiments that will occur within schools over the course of COMPASS, providing a means for generating "practice based evidence" in school-based prevention programming. COMPASS is the first study with the infrastructure to robustly evaluate the impact that changes in multiple school-level programs, policies, and BE characteristics within or surrounding a school might have on multiple youth health behaviours or outcomes over time. COMPASS will provide valuable new insight for planning, tailoring and targeting of school-based prevention initiatives where they are most likely to have impact.
NASA Astrophysics Data System (ADS)
Macher, H.; Landes, T.; Grussenmeyer, P.
2016-06-01
Laser scanners are widely used for the modelling of existing buildings and particularly in the creation process of as-built BIM (Building Information Modelling). However, the generation of as-built BIM from point clouds involves mainly manual steps and it is consequently time consuming and error-prone. Along the path to automation, a three steps segmentation approach has been developed. This approach is composed of two phases: a segmentation into sub-spaces namely floors and rooms and a plane segmentation combined with the identification of building elements. In order to assess and validate the developed approach, different case studies are considered. Indeed, it is essential to apply algorithms to several datasets and not to develop algorithms with a unique dataset which could influence the development with its particularities. Indoor point clouds of different types of buildings will be used as input for the developed algorithms, going from an individual house of almost one hundred square meters to larger buildings of several thousand square meters. Datasets provide various space configurations and present numerous different occluding objects as for example desks, computer equipments, home furnishings and even wine barrels. For each dataset, the results will be illustrated. The analysis of the results will provide an insight into the transferability of the developed approach for the indoor modelling of several types of buildings.
Easy-interactive and quick psoriasis lesion segmentation
NASA Astrophysics Data System (ADS)
Ma, Guoli; He, Bei; Yang, Wenming; Shu, Chang
2013-12-01
This paper proposes an interactive psoriasis lesion segmentation algorithm based on Gaussian Mixture Model (GMM). Psoriasis is an incurable skin disease and affects large population in the world. PASI (Psoriasis Area and Severity Index) is the gold standard utilized by dermatologists to monitor the severity of psoriasis. Computer aid methods of calculating PASI are more objective and accurate than human visual assessment. Psoriasis lesion segmentation is the basis of the whole calculating. This segmentation is different from the common foreground/background segmentation problems. Our algorithm is inspired by GrabCut and consists of three main stages. First, skin area is extracted from the background scene by transforming the RGB values into the YCbCr color space. Second, a rough segmentation of normal skin and psoriasis lesion is given. This is an initial segmentation given by thresholding a single gaussian model and the thresholds are adjustable, which enables user interaction. Third, two GMMs, one for the initial normal skin and one for psoriasis lesion, are built to refine the segmentation. Experimental results demonstrate the effectiveness of the proposed algorithm.
Król, Bożena; Pikus, Stanisław; Chmielarz, Paweł; Skrzypiec, Krzysztof
2010-01-01
Polyurethane cationomers were synthesised in the reaction of 4,4’-methylenebis(phenyl isocyanate) with polyoxyethylene glycol (M = 2,000) or poly(tetrafluoroethyleneoxide-co-difluoromethylene oxide) α,ω-diisocyanate and N-methyl diethanolamine. Amine segments were built-in to the urethane-isocyanate prepolymer in the reaction with 1-bromobutane or formic acid, and then they were converted to alkylammonium cations. The obtained isocyanate prepolymers were then extended in the aqueous medium that yielded stable aqueous dispersions which were applied on the surfaces of test poly(tetrafluoroethylene) plates. After evaporation of water, the dispersions formed thin polymer coatings. 1H, 13C NMR and IR spectral methods were employed to confirm chemical structures of synthesised cationomers. Based on 1H NMR and IR spectra, the factors κ and α were calculated, which represented the polarity level of the obtained cationomers. The DSC, wide angle X-ray scattering and atom force microscopy methods were employed for the microstructural assessment of the obtained materials. Changes were discussed in the surface free energy and its components, as calculated independently according to the method suggested by van Oss–Good, in relation to chemical and physical structures of cationomers as well as morphology of coating surfaces obtained from those cationomers. Fluorine incorporated into cationomers (about 30%) contributed to lower surface free energy values, down to about 15 mJ/m2. That was caused by gradual weakening of long-range interactions within which the highest share is taken by dispersion interactions. PMID:20927181
Katapally, Tarun Reddy; Rainham, Daniel; Muhajarine, Nazeem
2015-11-30
In curbing physical inactivity, as behavioural interventions directed at individuals have not produced a population-level change, an ecological perspective called active living research has gained prominence. However, active living research consistently underexplores the role played by a perennial phenomenon encompassing all other environmental exposures-variation in weather. After factoring in weather variation, this study investigated the influence of diverse environmental exposures (including urban design and built environment) on the accumulation of globally recommended moderate to vigorous physical activity levels (MVPA) in children. This cross-sectional observational study is part of an active living initiative set in the Canadian prairie city of Saskatoon. As part of this study, Saskatoon's neighbourhoods were classified based on urban street design into grid-pattern, fractured grid-pattern and curvilinear types of neighbourhoods. Moreover, diverse environmental exposures were measured including, neighbourhood built environment, and neighbourhood and household socioeconomic environment. Actical accelerometers were deployed between April and June 2010 (spring-summer) to derive MVPA of 331 10-14-year-old children in 25 1-week cycles. Each cycle of accelerometry was conducted on a different cohort of children within the total sample and matched with weather data obtained from Environment Canada. Multilevel modelling using Hierarchical Linear and Non-linear Modelling software was conducted by factoring in weather variation to depict the influence of diverse environmental exposures on the accumulation of recommended MVPA. Urban design, including diversity of destinations within neighbourhoods played a significant role in the accumulation of MVPA. After factoring in weather variation, it was observed that children living in neighbourhoods closer to the city centre (with higher diversity of destinations) were more likely to accumulate recommended MVPA. The findings indicate that after factoring in weather variation, certain types of urban design are more likely to be associated with MVPA accumulation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
DOT National Transportation Integrated Search
2013-09-01
The interaction between the built environment, travel behavior and public health is now a major concern for both : researchers and urban planners. Currently, there is little empirical research that explores and examines the : relationship between eac...
Carlson, Jordan A; Sallis, James F; Kerr, Jacqueline; Conway, Terry L; Cain, Kelli; Frank, Lawrence D; Saelens, Brian E
2015-01-01
Purpose To investigate the relation of factors from multiple levels of ecological models (ie, individual, interpersonal and environmental) to active travel to/from school in an observational study of young adolescents. Methods Participants were 294 12–15-year olds living within two miles of their school. Demographic, psychosocial and perceived built environment characteristics around the home were measured by survey, and objective built environment factors around home and school were assessed in Geographic Information Systems (GIS). Mixed effects multinomial regression models tested correlates of engaging in 1–4 (vs 0) and 5–10 (vs 0) active trips/week to/from school, adjusted for distance and other covariates. Results 64% of participants reported ≥1 active trip/ week to/from school. Significant correlates of occasional and/or habitual active travel to/from school included barriers (ORs=0.27 and 0.15), parent modelling of active travel (OR=3.27 for habitual), perceived street connectivity (OR=1.78 for occasional), perceived pedestrian safety around home (OR=2.04 for habitual), objective street connectivity around home (OR=0.97 for occasional), objective residential density around home (ORs=1.10 and 1.11) and objective residential density around school (OR=1.14 for habitual). Parent modelling interacted with pedestrian safety in explaining active travel to/from school. Conclusions Results supported multilevel correlates of adolescents active travel to school, consistent with ecological models. Correlates of occasional and habitual active travel to/from school were similar. Built environment attributes around schools, particularly residential density, should be considered when siting new schools and redeveloping neighbourhoods around existing schools. PMID:24659503
Carlson, Jordan A; Sallis, James F; Kerr, Jacqueline; Conway, Terry L; Cain, Kelli; Frank, Lawrence D; Saelens, Brian E
2014-12-01
To investigate the relation of factors from multiple levels of ecological models (ie, individual, interpersonal and environmental) to active travel to/from school in an observational study of young adolescents. Participants were 294 12-15-year olds living within two miles of their school. Demographic, psychosocial and perceived built environment characteristics around the home were measured by survey, and objective built environment factors around home and school were assessed in Geographic Information Systems (GIS). Mixed effects multinomial regression models tested correlates of engaging in 1-4 (vs 0) and 5-10 (vs 0) active trips/week to/from school, adjusted for distance and other covariates. 64% of participants reported ≥1 active trip/week to/from school. Significant correlates of occasional and/or habitual active travel to/from school included barriers (ORs=0.27 and 0.15), parent modelling of active travel (OR=3.27 for habitual), perceived street connectivity (OR=1.78 for occasional), perceived pedestrian safety around home (OR=2.04 for habitual), objective street connectivity around home (OR=0.97 for occasional), objective residential density around home (ORs=1.10 and 1.11) and objective residential density around school (OR=1.14 for habitual). Parent modelling interacted with pedestrian safety in explaining active travel to/from school. Results supported multilevel correlates of adolescents' active travel to school, consistent with ecological models. Correlates of occasional and habitual active travel to/from school were similar. Built environment attributes around schools, particularly residential density, should be considered when siting new schools and redeveloping neighbourhoods around existing schools. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
NASA Technical Reports Server (NTRS)
Lin, Ge
2005-01-01
Johnson Space Center has archived thousands of astronauts acquired Earth images. Some spectacular images have been widely used in news media and in k-12 class room, but their potential utilizations in health promotion and disease prevention have relatively untapped. The project uses daytime ISS photographs to define city forms and links them to city or metropolitan level health data in a multicity context. Road connectivity, landuse mix and Shannon's information indices were used in the classification of photographs. In contrast to previous remote-sensing studies, which tend to focus on a single city or a portion of a city, this project utilized photographs of 39 U.S. cities. And in contrast to previous health-promotion studies on the built environment, which tend to rely on survey respondents' responses to evaluate road connectivity or mixed land use for a single study site, the project examined the built environments of multiple cities based on ISS photos. It was found that road connectivity and landuse mix were not statistically significant by themselves, but the composite measure of the Shannon index was significantly associated with physical activity, but not BMI. Consequently, leisure-time physical activity seems to be positively associated with the urban complexity scale. It was also concluded that unless they are planned or designed in advance, photographs taken by astronauts generally are not appropriate for a study of a single-site built environment nor are they appropriate for a study of infectious diseases at a local scale. To link urban built environment with city-wide health indicators, both the traditional nadir view and oblique views should be emphasized in future astronauts' earth observation photographs.
Management of the science ground segment for the Euclid mission
NASA Astrophysics Data System (ADS)
Zacchei, Andrea; Hoar, John; Pasian, Fabio; Buenadicha, Guillermo; Dabin, Christophe; Gregorio, Anna; Mansutti, Oriana; Sauvage, Marc; Vuerli, Claudio
2016-07-01
Euclid is an ESA mission aimed at understanding the nature of dark energy and dark matter by using simultaneously two probes (weak lensing and baryon acoustic oscillations). The mission will observe galaxies and clusters of galaxies out to z 2, in a wide extra-galactic survey covering 15000 deg2, plus a deep survey covering an area of 40 deg². The payload is composed of two instruments, an imager in the visible domain (VIS) and an imager-spectrometer (NISP) covering the near-infrared. The launch is planned in Q4 of 2020. The elements of the Euclid Science Ground Segment (SGS) are the Science Operations Centre (SOC) operated by ESA and nine Science Data Centres (SDCs) in charge of data processing, provided by the Euclid Consortium (EC), formed by over 110 institutes spread in 15 countries. SOC and the EC started several years ago a tight collaboration in order to design and develop a single, cost-efficient and truly integrated SGS. The distributed nature, the size of the data set, and the needed accuracy of the results are the main challenges expected in the design and implementation of the SGS. In particular, the huge volume of data (not only Euclid data but also ground based data) to be processed in the SDCs will require distributed storage to avoid data migration across SDCs. This paper describes the management challenges that the Euclid SGS is facing while dealing with such complexity. The main aspect is related to the organisation of a geographically distributed software development team. In principle algorithms and code is developed in a large number of institutes, while data is actually processed at fewer centers (the national SDCs) where the operational computational infrastructures are maintained. The software produced for data handling, processing and analysis is built within a common development environment defined by the SGS System Team, common to SOC and ECSGS, which has already been active for several years. The code is built incrementally through different levels of maturity, going from prototypes (developed mainly by scientists) to production code (engineered and tested at the SDCs). A number of incremental challenges (infrastructure, data processing and integrated) have been included in the Euclid SGS test plan to verify the correctness and accuracy of the developed systems.
NASA Astrophysics Data System (ADS)
Zhou, Y.; Zhao, H.; Hao, H.; Wang, C.
2018-05-01
Accurate remote sensing water extraction is one of the primary tasks of watershed ecological environment study. Since the Yanhe water system has typical characteristics of a small water volume and narrow river channel, which leads to the difficulty for conventional water extraction methods such as Normalized Difference Water Index (NDWI). A new Multi-Spectral Threshold segmentation of the NDWI (MST-NDWI) water extraction method is proposed to achieve the accurate water extraction in Yanhe watershed. In the MST-NDWI method, the spectral characteristics of water bodies and typical backgrounds on the Landsat/TM images have been evaluated in Yanhe watershed. The multi-spectral thresholds (TM1, TM4, TM5) based on maximum-likelihood have been utilized before NDWI water extraction to realize segmentation for a division of built-up lands and small linear rivers. With the proposed method, a water map is extracted from the Landsat/TM images in 2010 in China. An accuracy assessment is conducted to compare the proposed method with the conventional water indexes such as NDWI, Modified NDWI (MNDWI), Enhanced Water Index (EWI), and Automated Water Extraction Index (AWEI). The result shows that the MST-NDWI method generates better water extraction accuracy in Yanhe watershed and can effectively diminish the confusing background objects compared to the conventional water indexes. The MST-NDWI method integrates NDWI and Multi-Spectral Threshold segmentation algorithms, with richer valuable information and remarkable results in accurate water extraction in Yanhe watershed.
Villaveces, Andrés; Nieto, Luis Alfonso; Ortega, Delia; Ríos, José Fernando; Medina, John Jairo; Gutiérrez, María Isabel; Rodríguez, Daniel
2012-10-01
To assess pedestrians' perceptions of the walkability of the urban environment and pedestrian safety in Cali, Colombia. Standardised intercept interviews were conducted of 400 pedestrians walking in 20 randomly selected urban zones to ascertain frequency of walking, and perceptions of safety, the built environment and security. Four focus group meetings were held with community members and students addressing these issues in an open-ended forum. The study analysed quantitative data collected in street interviews and qualitative information from focus groups addressing respondents' views on problems for pedestrians, how the built environment affects walking and ideal walking conditions. Access to public transportation was deemed the most positive characteristic of the built environment and 61% of respondents liked walking in the street. When disaggregating street conditions, the majority of pedestrians were dissatisfied with their walking experiences. Pedestrians cited lack of respect for norms, personal safety and built environment characteristics as their main concerns. Among frequent walkers, residents tended to rate their neighbourhoods more negatively compared with non-residents. Through qualitative interviews it became apparent that narrow sidewalks that are frequently obstructed by motor vehicles are a key reason for pedestrian dissatisfaction. A perception of overall insecurity further determines how pedestrians assess or modulate their walking in this city. Overall, walking in Cali was perceived negatively by pedestrians because of built environment characteristics and perceptions of insecurity. Qualitative information used to complement intercept surveys can provide a better way to identify pedestrian-specific transport-related problems.
Patriot Advanced Capability-3 Missile Segment Enhancement (PAC-3 MSE)
2015-12-01
Threshold Demonstrated Performance Current Estimate System Training Proficiency Level Soldiers (Operators, Maintainers, and Leaders) are able to...constructive training environments by using TADSS to conduct multi- level training for both operators and maintenance personnel. With the addition...0.0 Total 6037.0 6037.0 N/A 6276.9 6722.3 6722.3 6900.3 Current APB Cost Estimate Reference Army Cost Position dated February 28, 2014 Confidence Level
Local health department leadership strategies for healthy built environments.
Kuiper, Heather; Jackson, Richard J; Barna, Stefi; Satariano, William A
2012-01-01
The built environment is an important but less-recognized health determinant, and local health departments need expanded guidance to address it. In such situations, leadership is particularly relevant. To assess whether and how local public and environmental health leaders increase their departments' health-promoting impact on built environment design, and what pitfalls they should avoid. Mixed-methods employing cross-sectional surveys and a comparative case study. Local public and environmental health departments. PARTICIPANTS SURVEY: A total of 159 (89%) health officers, health directors, and environmental health directors from all 62 local jurisdictions in California. Case-Study: Three departments, 12 cases, 36 health and land-use professionals, and 30 key informants. The study measured the influence of leadership practices on health departments' built environment-related collaborations, land use activities, policy developments, and contributions to physical changes. Quantitative multivariate linear and logistic regression were used. Case-study content analysis and pattern-matching, which related strong and weak leadership practices to outcomes, were also employed. Departments having highly innovative leaders with positive attitudes had greater odds of achieving physical changes to the built environment (OR: 4.5, 3.4, respectively). Leadership that most prepared their departments for built environment work (by updating staffing, structure, and strategy) tripled interagency and cross-sector collaboration (OR: 3.4). Leadership of successful departments consistently (1) established and managed a healthy built environment vision, (2) cultivated innovation, (3) supported, empowered and protected staff, (4) directly engaged in land use and transportation processes, (5) established direct contacts with directors in other departments, and (6) leveraged their professional reputation. Inconsistency in these practices was twice as common among failure as success cases (80%, 43%). Local health leadership underlies public and environmental health departments' community design efforts and should receive technical support and targeted resources to do so effectively.
Subcortical structure segmentation using probabilistic atlas priors
NASA Astrophysics Data System (ADS)
Gouttard, Sylvain; Styner, Martin; Joshi, Sarang; Smith, Rachel G.; Cody Hazlett, Heather; Gerig, Guido
2007-03-01
The segmentation of the subcortical structures of the brain is required for many forms of quantitative neuroanatomic analysis. The volumetric and shape parameters of structures such as lateral ventricles, putamen, caudate, hippocampus, pallidus and amygdala are employed to characterize a disease or its evolution. This paper presents a fully automatic segmentation of these structures via a non-rigid registration of a probabilistic atlas prior and alongside a comprehensive validation. Our approach is based on an unbiased diffeomorphic atlas with probabilistic spatial priors built from a training set of MR images with corresponding manual segmentations. The atlas building computes an average image along with transformation fields mapping each training case to the average image. These transformation fields are applied to the manually segmented structures of each case in order to obtain a probabilistic map on the atlas. When applying the atlas for automatic structural segmentation, an MR image is first intensity inhomogeneity corrected, skull stripped and intensity calibrated to the atlas. Then the atlas image is registered to the image using an affine followed by a deformable registration matching the gray level intensity. Finally, the registration transformation is applied to the probabilistic maps of each structures, which are then thresholded at 0.5 probability. Using manual segmentations for comparison, measures of volumetric differences show high correlation with our results. Furthermore, the dice coefficient, which quantifies the volumetric overlap, is higher than 62% for all structures and is close to 80% for basal ganglia. The intraclass correlation coefficient computed on these same datasets shows a good inter-method correlation of the volumetric measurements. Using a dataset of a single patient scanned 10 times on 5 different scanners, reliability is shown with a coefficient of variance of less than 2 percents over the whole dataset. Overall, these validation and reliability studies show that our method accurately and reliably segments almost all structures. Only the hippocampus and amygdala segmentations exhibit relative low correlation with the manual segmentation in at least one of the validation studies, whereas they still show appropriate dice overlap coefficients.
From built environment to health inequalities: An explanatory framework based on evidence
Gelormino, Elena; Melis, Giulia; Marietta, Cristina; Costa, Giuseppe
2015-01-01
Objective: The Health in All Policies strategy aims to engage every policy domain in health promotion. The more socially disadvantaged groups are usually more affected by potential negative impacts of policies if they are not health oriented. The built environment represents an important policy domain and, apart from its housing component, its impact on health inequalities is seldom assessed. Methods: A scoping review of evidence on the built environment and its health equity impact was carried out, searching both urban and medical literature since 2000 analysing socio-economic inequalities in relation to different components of the built environment. Results: The proposed explanatory framework assumes that key features of built environment (identified as density, functional mix and public spaces and services), may influence individual health through their impact on both natural environment and social context, as well as behaviours, and that these effects may be unequally distributed according to the social position of individuals. Conclusion: In general, the expected links proposed by the framework are well documented in the literature; however, evidence of their impact on health inequalities remains uncertain due to confounding factors, heterogeneity in study design, and difficulty to generalize evidence that is still very embedded to local contexts. PMID:26844145
2010-07-01
level information including: 1) previously collected geographic information systems (GIS) data about the social and built environment; and 2...of interest (discrimination), we also identified several other domains of interest to include in the questionnaire: stress, coping, social support...and social networks, social burden, patient-provider communication, cultural factors and beliefs, cultural health capital, sociodemographics
New auto-segment method of cerebral hemorrhage
NASA Astrophysics Data System (ADS)
Wang, Weijiang; Shen, Tingzhi; Dang, Hua
2007-12-01
A novel method for Computerized tomography (CT) cerebral hemorrhage (CH) image automatic segmentation is presented in the paper, which uses expert system that models human knowledge about the CH automatic segmentation problem. The algorithm adopts a series of special steps and extracts some easy ignored CH features which can be found by statistic results of mass real CH images, such as region area, region CT number, region smoothness and some statistic CH region relationship. And a seven steps' extracting mechanism will ensure these CH features can be got correctly and efficiently. By using these CH features, a decision tree which models the human knowledge about the CH automatic segmentation problem has been built and it will ensure the rationality and accuracy of the algorithm. Finally some experiments has been taken to verify the correctness and reasonable of the automatic segmentation, and the good correct ratio and fast speed make it possible to be widely applied into practice.
MS lesion segmentation using a multi-channel patch-based approach with spatial consistency
NASA Astrophysics Data System (ADS)
Mechrez, Roey; Goldberger, Jacob; Greenspan, Hayit
2015-03-01
This paper presents an automatic method for segmentation of Multiple Sclerosis (MS) in Magnetic Resonance Images (MRI) of the brain. The approach is based on similarities between multi-channel patches (T1, T2 and FLAIR). An MS lesion patch database is built using training images for which the label maps are known. For each patch in the testing image, k similar patches are retrieved from the database. The matching labels for these k patches are then combined to produce an initial segmentation map for the test case. Finally a novel iterative patch-based label refinement process based on the initial segmentation map is performed to ensure spatial consistency of the detected lesions. A leave-one-out evaluation is done for each testing image in the MS lesion segmentation challenge of MICCAI 2008. Results are shown to compete with the state-of-the-art methods on the MICCAI 2008 challenge.
NASA Astrophysics Data System (ADS)
Steber, Amanda; Fatima, Mariyam; Perez, Cristobal; Schnell, Melanie
2017-06-01
In the past decade, astrochemistry has seen an increase in interest. As higher throughput and increased resolution radio astronomy facilities come online, faster laboratory instrumentation that directly covers the frequency ranges of these facilities is needed. The 18-26 GHz region is of interest astronomically as many cold organic molecules have their peak intensity in this region. We present here a new segmented chirped pulse Fourier transform microwave (CP-FTMW) spectrometer operating between 18-26 GHz. Using state-of-the-art digital electronics and the segmented approach[1], this design has the potential to be faster and cheaper than the previously presented broadband design. Characterization of the instrument using OCS will be presented, along with a comparison to the previously built and optimized 18-26 CP-FTMW built at the University of Virginia. It will be coupled with a discharge nozzle[2], and its applications to astrochemistry will be explored in this talk. [1] Neill, J.L., Harris, B.J., Steber, A.L., Douglass, K.O., Plusquellic, D.F., Pate, B.H. Opt. Express, 21, 19743-19749, 2013. [2] McCarthy, M.C., Chen, W., Travers, M.J., Thaddeus, P. Astrophys. J. Suppl. Ser., 129, 611-623 , 2000.
Factors Shaping the Human Exposome in the Built Environment: Opportunities for Engineering Control.
Dai, Dongjuan; Prussin, Aaron J; Marr, Linsey C; Vikesland, Peter J; Edwards, Marc A; Pruden, Amy
2017-07-18
The "exposome" is a term describing the summation of one's lifetime exposure to microbes and chemicals. Such exposures are now recognized as major drivers of human health and disease. Because humans spend ∼90% of their time indoors, the built environment exposome merits particular attention. Herein we utilize an engineering perspective to advance understanding of the factors that shape the built environment exposome and its influence on human wellness and disease, while simultaneously informing development of a framework for intentionally controlling the exposome to protect public health. Historically, engineers have been focused on controlling chemical and physical contaminants and on eradicating microbes; however, there is a growing awareness of the role of "beneficial" microbes. Here we consider the potential to selectively control the materials and chemistry of the built environment to positively influence the microbial and chemical components of the indoor exposome. Finally, we discuss research gaps that must be addressed to enable intentional engineering design, including the need to define a "healthy" built environment exposome and how to control it.
Grant, Jill L; MacKay, Kathryn C; Manuel, Patricia M; McHugh, Tara-Leigh F
2010-01-01
To identify factors which limit the ability of local governments to make appropriate investments in the built environment to promote youth health and reduce obesity outcomes in Atlantic Canada. Policy-makers and professionals participated in focus groups to discuss the receptiveness of local governments to introducing health considerations into decision-making. Seven facilitated focus groups involved 44 participants from Atlantic Canada. Thematic discourse analysis of the meeting transcripts identified systemic barriers to creating a built environment that fosters health for youth aged 12-15 years. Participants consistently identified four categories of barriers. Financial barriers limit the capacities of local government to build, maintain and operate appropriate facilities. Legacy issues mean that communities inherit a built environment designed to facilitate car use, with inadequate zoning authority to control fast food outlets, and without the means to determine where schools are built or how they are used. Governance barriers derive from government departments with distinct and competing mandates, with a professional structure that privileges engineering, and with funding programs that encourage competition between municipalities. Cultural factors and values affect outcomes: people have adapted to car-oriented living; poverty reduces options for many families; parental fears limit children's mobility; youth receive limited priority in built environment investments. Participants indicated that health issues have increasing profile within local government, making this an opportune time to discuss strategies for optimizing investments in the built environment. The focus group method can foster mutual learning among professionals within government in ways that could advance health promotion.
Thornton, Lukar E; Pearce, Jamie R; Kavanagh, Anne M
2011-07-01
Features of the built environment are increasingly being recognised as potentially important determinants of obesity. This has come about, in part, because of advances in methodological tools such as Geographic Information Systems (GIS). GIS has made the procurement of data related to the built environment easier and given researchers the flexibility to create a new generation of environmental exposure measures such as the travel time to the nearest supermarket or calculations of the amount of neighbourhood greenspace. Given the rapid advances in the availability of GIS data and the relative ease of use of GIS software, a glossary on the use of GIS to assess the built environment is timely. As a case study, we draw on aspects the food and physical activity environments as they might apply to obesity, to define key GIS terms related to data collection, concepts, and the measurement of environmental features.
136. Linn Cove Viaduct. This is the first precast concrete ...
136. Linn Cove Viaduct. This is the first precast concrete segmental viaduct to be built with the progressive method in the United States. It contains nearly every type of highway geometry within its length. With its super elevation of up to ten degrees and its tight horizontal and spiral curves, it was the most complicated bridge of its type built to that time looking south-southwest. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
Severin, Anna C; Burkett, Brendan J; McKean, Mark R; Wiegand, Aaron N; Sayers, Mark G L
2017-01-01
Aquatic exercises can be used in clinical and sporting disciplines for both rehabilitation and sports training. However, there is limited knowledge on the influence of water immersion on the kinematics of exercises commonly used in rehabilitation and fitness programs. The aim of this study was to use inertial sensors to quantify differences in kinematics and movement variability of bodyweight squats, split squats, and single-leg squats performed on dry land and whilst immersed to the level of the greater trochanter. During two separate testing sessions, 25 active healthy university students (22.3±2.9 yr.) performed ten repetitions of each exercise, whilst tri-axial inertial sensors (100 Hz) recorded their trunk and lower body kinematics. Repeated-measures statistics tested for differences in segment orientation and speed, movement variability, and waveform patterns between environments, while coefficient of variance was used to assess differences in movement variability. Between-environment differences in segment orientation and speed were portrayed by plotting the mean difference ±95% confidence intervals (CI) throughout the tasks. The results showed that the depth of the squat and split squat were unaffected by the changed environment while water immersion allowed for a deeper single leg squat. The different environments had significant effects on the sagittal plane orientations and speeds for all segments. Water immersion increased the degree of movement variability of the segments in all exercises, except for the shank in the frontal plane, which showed more variability on land. Without compromising movement depth, the aquatic environment induces more upright trunk and shank postures during squats and split squats. The aquatic environment allows for increased squat depth during the single-leg squat, and increased shank motions in the frontal plane. Our observations therefore support the use of water-based squat tasks for rehabilitation as they appear to improve the technique without compromising movement depth.
2017-01-01
Aquatic exercises can be used in clinical and sporting disciplines for both rehabilitation and sports training. However, there is limited knowledge on the influence of water immersion on the kinematics of exercises commonly used in rehabilitation and fitness programs. The aim of this study was to use inertial sensors to quantify differences in kinematics and movement variability of bodyweight squats, split squats, and single-leg squats performed on dry land and whilst immersed to the level of the greater trochanter. During two separate testing sessions, 25 active healthy university students (22.3±2.9 yr.) performed ten repetitions of each exercise, whilst tri-axial inertial sensors (100 Hz) recorded their trunk and lower body kinematics. Repeated-measures statistics tested for differences in segment orientation and speed, movement variability, and waveform patterns between environments, while coefficient of variance was used to assess differences in movement variability. Between-environment differences in segment orientation and speed were portrayed by plotting the mean difference ±95% confidence intervals (CI) throughout the tasks. The results showed that the depth of the squat and split squat were unaffected by the changed environment while water immersion allowed for a deeper single leg squat. The different environments had significant effects on the sagittal plane orientations and speeds for all segments. Water immersion increased the degree of movement variability of the segments in all exercises, except for the shank in the frontal plane, which showed more variability on land. Without compromising movement depth, the aquatic environment induces more upright trunk and shank postures during squats and split squats. The aquatic environment allows for increased squat depth during the single-leg squat, and increased shank motions in the frontal plane. Our observations therefore support the use of water-based squat tasks for rehabilitation as they appear to improve the technique without compromising movement depth. PMID:28767683
Qiu, Zhichang; Tu, Long; Huang, Liang; Zhu, Taoyuanmin; Nock, Volker; Yu, Enchao; Liu, Xiao; Wang, Wenhui
2015-01-01
Optogenetics has been recently applied to manipulate the neural circuits of Caenorhabditis elegans (C. elegans) to investigate its mechanosensation and locomotive behavior, which is a fundamental topic in model biology. In most neuron-related research, free C. elegans moves on an open area such as agar surface. However, this simple environment is different from the soil, in which C. elegans naturally dwells. To bridge up the gap, this paper presents integration of optogenetic illumination of C. elegans neural circuits and muscular force measurement in a structured microfluidic chip mimicking the C. elegans soil habitat. The microfluidic chip is essentially a ∼1 × 1 cm2 elastomeric polydimethylsiloxane micro-pillar array, configured in either form of lattice (LC) or honeycomb (HC) to mimic the environment in which the worm dwells. The integrated system has four key modules for illumination pattern generation, pattern projection, automatic tracking of the worm, and force measurement. Specifically, two optical pathways co-exist in an inverted microscope, including built-in bright-field illumination for worm tracking and pattern generation, and added-in optogenetic illumination for pattern projection onto the worm body segment. The behavior of a freely moving worm in the chip under optogenetic manipulation can be recorded for off-line force measurements. Using wild-type N2 C. elegans, we demonstrated optical illumination of C. elegans neurons by projecting light onto its head/tail segment at 14 Hz refresh frequency. We also measured the force and observed three representative locomotion patterns of forward movement, reversal, and omega turn for LC and HC configurations. Being capable of stimulating or inhibiting worm neurons and simultaneously measuring the thrust force, this enabling platform would offer new insights into the correlation between neurons and locomotive behaviors of the nematode under a complex environment. PMID:25759756
ISS External Contamination Environment for Space Science Utilization
NASA Technical Reports Server (NTRS)
Soares, Carlos; Mikatarian, Ron; Steagall, Courtney; Huang, Alvin; Koontz, Steven; Worthy, Erica
2014-01-01
(1) The International Space Station is the largest and most complex on-orbit platform for space science utilization in low Earth orbit, (2) Multiple sites for external payloads, with exposure to the associated natural and induced environments, are available to support a variety of space science utilization objectives, (3) Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle, and (4)The ISS has been designed, built and integrated with strict contamination requirements to provide low levels of induced contamination on external payload assets.
NASA Technical Reports Server (NTRS)
Olsen, Randy; Huang, Alvin; Steagall, Courtney; Kohl, Nathaniel; Koontz, Steve; Worthy, Erica
2017-01-01
The International Space Station is the largest and most complex on-orbit platform for space science utilization in low Earth orbit. Multiple sites for external payloads, with exposure to the associated natural and induced environments, are available to support a variety of space science utilization objectives. Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle. The ISS has been designed, built and integrated with strict contamination requirements to provide low levels of induced contamination on external payload assets.
USDA-ARS?s Scientific Manuscript database
Abstract: Existing research suggests an association between the built environment characteristics of the neighborhood in which adolescents live and their level of physical activity. The geographic boundaries within which youth play are often arbitrarily assumed in existing research, but the geograph...
Port Communities Face Many Challenges: Climate change – Sea Level Rise, Extreme Events - “Assets” become vulnerabilities, nuisance flooding, changes in waste water and stormwater capacity, changes in near-shore ecology and water quality. Port Expansion - Incr...
Using Attributes of Natural Systems to Plan the Built Environment
The concept of 'protection' is possible only before something is lost, however, development of the built environment to meet human needs also compromises the environmental systems that sustain human life. Because maintaining an environment that is able to sustain human life requi...
The impact of exposure to films of natural and built environments on state body appreciation.
Swami, Viren; Pickering, Mark; Barron, David; Patel, Shreepali
2018-06-12
Previous work has shown that exposure to images of nature results in elevated state body appreciation, but static images may lack ecological validity. Here, we examined the impact of exposure to short films of simulated, first-person walks in natural or built environments. Thirty-six university students completed a measure of state body appreciation before and after watching films of either a walk in a natural or a built environment created specifically for the present study. Two weeks later, they completed the same task but watched the other film type. Results indicated that exposure to the film of a natural environment resulted in significantly elevated state body appreciation (d = 0.66). There was no significant change in state body appreciation following exposure to the film of the built environment (d = 0.14). These findings suggest that exposure to films depicting the natural environment may promote immediate, moderate-sized improvements in state body image. Copyright © 2018 Elsevier Ltd. All rights reserved.
Virtual Learning Environment for Interactive Engagement with Advanced Quantum Mechanics
NASA Astrophysics Data System (ADS)
Pedersen, Mads Kock; Skyum, Birk; Heck, Robert; Müller, Romain; Bason, Mark; Lieberoth, Andreas; Sherson, Jacob F.
2016-06-01
A virtual learning environment can engage university students in the learning process in ways that the traditional lectures and lab formats cannot. We present our virtual learning environment StudentResearcher, which incorporates simulations, multiple-choice quizzes, video lectures, and gamification into a learning path for quantum mechanics at the advanced university level. StudentResearcher is built upon the experiences gathered from workshops with the citizen science game Quantum Moves at the high-school and university level, where the games were used extensively to illustrate the basic concepts of quantum mechanics. The first test of this new virtual learning environment was a 2014 course in advanced quantum mechanics at Aarhus University with 47 enrolled students. We found increased learning for the students who were more active on the platform independent of their previous performances.
International Space Station External Contamination Environment for Space Science Utilization
NASA Technical Reports Server (NTRS)
Soares, Carlos E.; Mikatarian, Ronald R.; Steagall, Courtney A.; Huang, Alvin Y.; Koontz, Steven; Worthy, Erica
2014-01-01
The International Space Station (ISS) is the largest and most complex on-orbit platform for space science utilization in low Earth orbit. Multiple sites for external payloads, with exposure to the associated natural and induced environments, are available to support a variety of space science utilization objectives. Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle. The ISS has been designed, built and integrated with strict contamination requirements to provide low levels of induced contamination on external payload assets. This paper addresses the ISS induced contamination environment at attached payload sites, both at the requirements level as well as measurements made on returned hardware, and contamination forecasting maps being generated to support external payload topology studies and science utilization.
Correction tool for Active Shape Model based lumbar muscle segmentation.
Valenzuela, Waldo; Ferguson, Stephen J; Ignasiak, Dominika; Diserens, Gaelle; Vermathen, Peter; Boesch, Chris; Reyes, Mauricio
2015-08-01
In the clinical environment, accuracy and speed of the image segmentation process plays a key role in the analysis of pathological regions. Despite advances in anatomic image segmentation, time-effective correction tools are commonly needed to improve segmentation results. Therefore, these tools must provide faster corrections with a low number of interactions, and a user-independent solution. In this work we present a new interactive correction method for correcting the image segmentation. Given an initial segmentation and the original image, our tool provides a 2D/3D environment, that enables 3D shape correction through simple 2D interactions. Our scheme is based on direct manipulation of free form deformation adapted to a 2D environment. This approach enables an intuitive and natural correction of 3D segmentation results. The developed method has been implemented into a software tool and has been evaluated for the task of lumbar muscle segmentation from Magnetic Resonance Images. Experimental results show that full segmentation correction could be performed within an average correction time of 6±4 minutes and an average of 68±37 number of interactions, while maintaining the quality of the final segmentation result within an average Dice coefficient of 0.92±0.03.
Foley, Louise; Coombes, Emma; Hayman, Dan; Humphreys, David; Jones, Andrew; Mitchell, Richard; Ogilvie, David
2018-04-24
Features of the urban neighbourhood influence the physical, social and mental wellbeing of residents and communities. We explored the longitudinal association between change to the neighbourhood built environment and the wellbeing of local residents in deprived areas of Glasgow, Scotland. A cohort of residents (n = 365; mean age 50 years; 44% male; 4.1% of the 9000 mailed surveys at baseline) responded to a postal survey in 2005 and 2013. Wellbeing was assessed with the mental (MCS-8) and physical (PCS-8) components of the SF-8 scale. We developed software to aid identification of visible changes in satellite imagery occurring over time. We then used a Geographical Information System to calculate the percentage change in the built environment occurring within an 800 m buffer of each participant's home. The median change in the neighbourhood built environment was 3% (interquartile range 6%). In the whole sample, physical wellbeing declined by 1.5 units on average, and mental wellbeing increased by 0.9 units, over time. In multivariable linear regression analyses, participants living in neighbourhoods with a greater amount of change in the built environment (unit change = 1%) experienced significantly reduced physical (PCS-8: -0.13, 95% CI -0.26 to 0.00) and mental (MCS-8: -0.16, 95% CI -0.31 to - 0.02) wellbeing over time compared to those living in neighbourhoods with less change. For mental wellbeing, a significant interaction by baseline perception of financial strain indicated a larger reduction in those experiencing greater financial strain (MCS-8: -0.22, 95% CI -0.39 to - 0.06). However, this relationship was reversed in those experiencing lower financial strain, whereby living in neighbourhoods with a greater amount of change was associated with significantly improved mental wellbeing over time (MCS-8: 0.38, 95% CI 0.04 to 0.72). Overall, we found some evidence that living in neighbourhoods experiencing higher levels of physical change worsened wellbeing in local residents. However, we found a stronger negative relationship in those with lower financial security and a positive relationship in those with higher financial security. This is one of few studies exploring the longitudinal relationship between the environment and health.
Naughton, Paul; McCarthy, Mary; McCarthy, Sinéad
2017-10-01
Considering confectionary consumption behaviour this cross-sectional study used social cognition variables to identify distinct segments in terms of their motivation and efforts to decrease their consumption of such foods with the aim of informing targeted social marketing campaigns. Using Latent Class analysis on a sample of 500 adults four segments were identified: unmotivated, triers, successful actors, and thrivers. The unmotivated and triers segments reported low levels of perceived need and perceived behavioural control (PBC) in addition to high levels of habit and hedonic hunger with regards their consumption of confectionery foods. Being a younger adult was associated with higher odds of being in the unmotivated and triers segments and being female was associated with higher odds of being in the triers and successful actors segments. The findings indicate that in the absence of strong commitment to eating low amounts of confectionery foods (i.e. perceived need) people will continue to overconsume free sugars regardless of motivation to change. It is therefore necessary to identify relevant messages or 'triggers' related to sugar consumption that resonate with young adults in particular. For those motivated to change, counteracting unhealthy eating habits and the effects of hedonic hunger may necessitate changes to food environments in order to make the healthy choice more appealing and accessible. Copyright © 2017 Elsevier Ltd. All rights reserved.
Quantifying the Modern City: Emerging Technologies and Big Data for Active Living Research.
Adlakha, Deepti
2017-01-01
Opportunities and infrastructure for active living are an important aspect of a community's design, livability, and health. Features of the built environment influence active living and population levels of physical activity, but objective study of the built environment influence on active living behaviors is challenging. The use of emerging technologies for active living research affords new and promising means to obtain objective data on physical activity behaviors and improve the precision and accuracy of measurements. This is significant for physical activity promotion because precise measurements can enable detailed examinations of where, when, and how physical activity behaviors actually occur, thus enabling more effective targeting of particular behavior settings and environments. The aim of this focused review is to provide an overview of trends in emerging technologies that can profoundly change our ability to understand environmental determinants of active living. It discusses novel technological approaches and big data applications to measure and track human behaviors that may have broad applications across the fields of urban planning, public health, and spatial epidemiology.
Residential instability and obesity over time: the role of the social and built environment.
Jones, Antwan
2015-03-01
This research uses the National Longitudinal Study of Adult Health's Obesity and Neighborhood Environment (ONE) to examine the relationship between residential instability and change in obesity in the United States. Mobility is thought to be related to obesity because it conditions what kinds of amenities are present in the areas where people live and what level of motivation individuals have to take advantage of these amenities. Thus, this research uses spatial measures as potential confounders for the mobility-health relationship. Results suggest that mobility is a protective factor against weight gain over time. However, the effect of mobility is completely explained by the environmental characteristics. After adjusting for changes in physical activity resources and the crime rate, adolescents who move and adolescents who do not move have precisely the same risk of being obese. Mobility is thus a function of the change in environmental characteristics. Implications for developing the built environment are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.
Association between Neighborhood Walkability, Cardiorespiratory Fitness and Body-Mass Index
Hoehner, Christine M.; Handy, Susan L.; Yan, Yan; Blair, teven N.; Berrigan, David
2011-01-01
Many studies have found cross-sectional associations between characteristics of the neighborhood built environment and physical activity (PA) behavior. However, most are based on self-reported PA, which is known to result in overestimation of PA and differential misclassification by demographic and biological characteristics. Cardiorespiratory fitness (CRF) is an objective marker of PA because it is primarily determined by PA. Furthermore, it is causally related to long-term health outcomes. Therefore, analyses of the association between CRF and built environment could strengthen arguments for the importance of built environment influences on health. We examined the association between neighborhood walkability and CRF and body-mass index (BMI). This cross-sectional analysis included 16,543 adults (5,017 women, 11,526 men) aged 18–90 years with home addresses in Texas who had a comprehensive clinical examination between 1987 and 2005. Outcomes included CRF from total duration on a maximal exercise treadmill test and measured BMI. Three neighborhood walkability factors emerged from principal components analyses of block-group measures derived from the U.S. Census. In multilevel adjusted analyses, the neighborhood walkability factors were significantly associated with CRF and BMI among men and women in the expected direction. An interaction between one of the neighborhood factors and age was also observed. The interaction suggested that living in neighborhoods with older homes and with residents traveling shorter distances to work was more strongly positively associated with CRF among younger adults and more strongly negatively associated with BMI among older adults. In conclusion, neighborhood characteristics hypothesized to support more PA and less driving were associated with higher levels of CRF and lower BMI. Demonstration of an association between built environment characteristics and CRF is a significant advance over past studies based on self-reported PA. Nevertheless, stronger causal evidence depends on more robust study designs and sophisticated measures of the environment, behavior, and their physiological consequences. PMID:22030212
ERIC Educational Resources Information Center
Pinzon-Perez, Helda
2007-01-01
Obesity is an important worldwide public health problem. Obesogenic environments have been associated with increasing rates of overweight and obesity. The relationship between obesity and the built environment, along with its implications for health education are discussed in this article.
NASA Technical Reports Server (NTRS)
Huppi, Hal; Tobias, Mark; Seiler, James
2003-01-01
The Five-Segment Engineering Test Motor (ETM-3) is an extended length reusable solid rocket motor (RSRM) intended to increase motor performance and internal environments above the current four-segment RSRM flight motor. The principal purpose of ETM-3 is to provide a test article for RSRM component margin testing. As the RSRM and Space Shuttle in general continue to age, replacing obsolete materials becomes an ever-increasing issue. Having a five-segment motor that provides environments in excess of normal opera- tion allows a mechanism to subject replacement materials to a more severe environment than experienced in flight. Additionally, ETM-3 offers a second design data point from which to develop and/or validate analytical models that currently have some level of empiricism associated with them. These enhanced models have the potential to further the understanding of RSRM motor performance and solid rocket motor (SRM) propulsion in general. Furthermore, these data could be leveraged to support a five-segment booster (FSB) development program should the Space Shuttle program choose to pursue this option for abort mode enhancements during the ascent phase. A tertiary goal of ETM-3 is to challenge both the ATK Thiokol Propulsion and NASA MSFC technical personnel through the design and analysis of a large solid rocket motor without the benefit of a well-established performance database such as the RSRM. The end result of this undertaking will be a more competent and experienced workforce for both organizations. Of particular interest are the motor design characteristics and the systems engineering approach used to conduct a complex yet successful large motor static test. These aspects of ETM-3 and more will be summarized.
Perchoux, Camille; Kestens, Yan; Brondeel, Ruben; Chaix, Basile
2015-12-01
Understanding how built environment characteristics influence recreational walking is of the utmost importance to develop population-level strategies to increase levels of physical activity in a sustainable manner. This study analyzes the residential and non-residential environmental correlates of recreational walking, using precisely geocoded activity space data. The point-based locations regularly visited by 4365 participants of the RECORD Cohort Study (Residential Environment and CORonary heart Disease) were collected between 2011 and 2013 in the Paris region using the VERITAS software (Visualization and Evaluation of Regular Individual Travel destinations and Activity Spaces). Zero-inflated negative binomial regressions were used to investigate associations between both residential and non-residential environmental exposure and overall self-reported recreational walking over 7 days. Density of destinations, presence of a lake or waterway, and neighborhood education were associated with an increase in the odds of reporting any recreational walking time. Only the density of destinations was associated with an increase in time spent walking for recreational purpose. Considering the recreational locations visited (i.e., sports and cultural destinations) in addition to the residential neighborhood in the calculation of exposure improved the model fit and increased the environment-walking associations, compared to a model accounting only for the residential space (Akaike Information Criterion equal to 52797 compared to 52815). Creating an environment supportive to walking around recreational locations may particularly stimulate recreational walking among people willing to use these facilities. Copyright © 2015 Elsevier Inc. All rights reserved.
King, Abby C; Salvo, Deborah; Banda, Jorge A; Ahn, David K; Gill, Thomas M; Miller, Michael; Newman, Anne B; Fielding, Roger A; Siordia, Carlos; Moore, Spencer; Folta, Sara; Spring, Bonnie; Manini, Todd; Pahor, Marco
2015-12-18
Obesity is an increasingly prevalent condition among older adults, yet relatively little is known about how built environment variables may be associated with obesity in older age groups. This is particularly the case for more vulnerable older adults already showing functional limitations associated with subsequent disability. The Lifestyle Interventions and Independence for Elders (LIFE) trial dataset (n = 1600) was used to explore the associations between perceived built environment variables and baseline obesity levels. Age-stratified recursive partitioning methods were applied to identify distinct subgroups with varying obesity prevalence. Among participants aged 70-78 years, four distinct subgroups, defined by combinations of perceived environment and race-ethnicity variables, were identified. The subgroups with the lowest obesity prevalence (45.5-59.4%) consisted of participants who reported living in neighborhoods with higher residential density. Among participants aged 79-89 years, the subgroup (of three distinct subgroups identified) with the lowest obesity prevalence (19.4%) consisted of non-African American/Black participants who reported living in neighborhoods with friends or acquaintances similar in demographic characteristics to themselves. Overall support for the partitioned subgroupings was obtained using mixed model regression analysis. The results suggest that, in combination with race/ethnicity, features of the perceived neighborhood built and social environments differentiated distinct groups of vulnerable older adults from different age strata that differed in obesity prevalence. Pending further verification, the results may help to inform subsequent targeting of such subgroups for further investigation. Clinicaltrials.gov Identifier = NCT01072500.
NASA Astrophysics Data System (ADS)
Chang, Ching-Ter; Chen, Huang-Mu; Zhuang, Zheng-Yun
2014-05-01
Supplier selection (SS) is a multi-criteria and multi-objective problem, in which multi-segment (e.g. imperfect-quality discount (IQD) and price-quantity discount (PQD)) and multi-aspiration level problems may be significantly important; however, little attention had been given to dealing with both of them simultaneously in the past. This study proposes a model for integrating multi-choice goal programming and multi-segment goal programming to solve the above-mentioned problems by providing the following main contributions: (1) it allows decision-makers to set multiple aspiration levels on the right-hand side of each goal to suit real-world situations, (2) the PQD and IQD conditions are considered in the proposed model simultaneously and (3) the proposed model can solve a SS problem with n suppliers where each supplier offers m IQD with r PQD intervals, where only ? extra binary variables are required. The usefulness of the proposed model is explained using a real case. The results indicate that the proposed model not only can deal with a SS problem with multi-segment and multi-aspiration levels, but also can help the decision-maker to find the appropriate order quantities for each supplier by considering cost, quality and delivery.
Besser, Lilah M; Rodriguez, Daniel A; McDonald, Noreen; Kukull, Walter A; Fitzpatrick, Annette L; Rapp, Stephen R; Seeman, Teresa
2018-03-01
Preliminary studies suggest that neighborhood social and built environment (BE) characteristics may affect cognition in older adults. Older adults are particularly vulnerable to the neighborhood environment due to a decreasing range of routine travel with increasing age. We examined if multiple neighborhood BE characteristics are cross-sectionally associated with cognition in a diverse sample of older adults, and if the BE-cognition associations vary by individual-level demographics. The sample included 4539 participants from the Multi-Ethnic Study of Atherosclerosis. Multivariable linear regression was used to examine the associations between five BE measures and four cognitive measures, and effect modification by individual-level education and race/ethnicity. In the overall sample, increasing social destination density, walking destination density, and intersection density were associated with worse overall cognition, whereas increasing proportion of land dedicated to retail was associated with better processing speed. Effect modification results suggest that the association between urban density and worse cognition may be limited to or strongest in those of non-white race/ethnicity. Although an increase in neighborhood retail destinations was associated with better cognition in the overall sample, these results suggest that certain BE characteristics in dense urban environments may have a disproportionately negative association with cognition in vulnerable populations. However, our findings must be replicated in longitudinal studies and other regional samples. Copyright © 2018 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Qin, Wenjian; Wu, Jia; Han, Fei; Yuan, Yixuan; Zhao, Wei; Ibragimov, Bulat; Gu, Jia; Xing, Lei
2018-05-01
Segmentation of liver in abdominal computed tomography (CT) is an important step for radiation therapy planning of hepatocellular carcinoma. Practically, a fully automatic segmentation of liver remains challenging because of low soft tissue contrast between liver and its surrounding organs, and its highly deformable shape. The purpose of this work is to develop a novel superpixel-based and boundary sensitive convolutional neural network (SBBS-CNN) pipeline for automated liver segmentation. The entire CT images were first partitioned into superpixel regions, where nearby pixels with similar CT number were aggregated. Secondly, we converted the conventional binary segmentation into a multinomial classification by labeling the superpixels into three classes: interior liver, liver boundary, and non-liver background. By doing this, the boundary region of the liver was explicitly identified and highlighted for the subsequent classification. Thirdly, we computed an entropy-based saliency map for each CT volume, and leveraged this map to guide the sampling of image patches over the superpixels. In this way, more patches were extracted from informative regions (e.g. the liver boundary with irregular changes) and fewer patches were extracted from homogeneous regions. Finally, deep CNN pipeline was built and trained to predict the probability map of the liver boundary. We tested the proposed algorithm in a cohort of 100 patients. With 10-fold cross validation, the SBBS-CNN achieved mean Dice similarity coefficients of 97.31 ± 0.36% and average symmetric surface distance of 1.77 ± 0.49 mm. Moreover, it showed superior performance in comparison with state-of-art methods, including U-Net, pixel-based CNN, active contour, level-sets and graph-cut algorithms. SBBS-CNN provides an accurate and effective tool for automated liver segmentation. It is also envisioned that the proposed framework is directly applicable in other medical image segmentation scenarios.
Fleig, Lena; Ashe, Maureen C; Voss, Christine; Therrien, Suzanne; Sims-Gould, Joanie; McKay, Heather A; Winters, Meghan
2016-12-01
Neighborhood environments can support or hinder physical activity especially as health declines with age. This study puts psychological theories of health behavior change in context with built environment research to better understand the interplay of environmental and psychosocial characteristics impacting older adults' sedentary behavior and physical activity. The Active Streets, Active People study recruited 193 older adults living in a highly walkable neighborhood in Vancouver, British Columbia, Canada. Participants completed questionnaires on attitudes toward walking, behavioral control for walking, and perceived built environment variables. To assess behavior, participants wore an ActiGraph GT3X + accelerometer for 7 consecutive days. Regression-based path analysis was conducted to examine whether the link between the perceived environment and behavior is mediated by psychosocial variables. In total, 174 participants had valid accelerometry data (Mage = 70.3, SD = 7.2) and demonstrated a daily average of 525.7 min of sedentary behavior (SD = 65.1) as well as high levels of total physical activity (M = 254.3, SD = 65.1 min/day). Mediation analysis revealed that perceived street connectivity and diversity of land use were negatively related to sedentary behavior, but only indirectly through behavioral control. Similarly, effects of street connectivity and diversity of land use on physical activity were mediated by behavioral control. Results highlighted that the perceived built environment is important for physical activity and sedentary behavior, largely because these environmental perceptions are positively linked to older adults' confidence in walking. By integrating environmental and psychosocial correlates of preventive health behaviors within a theoretical structure, the psychosocial mechanisms through which the environment affects activity can be better understood. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Does Viewing Documentary Films Affect Environmental Perceptions and Behaviors?
ERIC Educational Resources Information Center
Janpol, Henry L.; Dilts, Rachel
2016-01-01
This research explored whether viewing documentary films about the natural or built environment can exert a measurable influence on behaviors and perceptions. Different documentary films were viewed by subjects. One film emphasized the natural environment, while the other focused on the built environment. After viewing a film, a computer game…
Extracting built-up areas from TerraSAR-X data using object-oriented classification method
NASA Astrophysics Data System (ADS)
Wang, SuYun; Sun, Z. C.
2017-02-01
Based on single-polarized TerraSAR-X, the approach generates homogeneous segments on an arbitrary number of scale levels by applying a region-growing algorithm which takes the intensity of backscatter and shape-related properties into account. The object-oriented procedure consists of three main steps: firstly, the analysis of the local speckle behavior in the SAR intensity data, leading to the generation of a texture image; secondly, a segmentation based on the intensity image; thirdly, the classification of each segment using the derived texture file and intensity information in order to identify and extract build-up areas. In our research, the distribution of BAs in Dongying City is derived from single-polarized TSX SM image (acquired on 17th June 2013) with average ground resolution of 3m using our proposed approach. By cross-validating the random selected validation points with geo-referenced field sites, Quick Bird high-resolution imagery, confusion matrices with statistical indicators are calculated and used for assessing the classification results. The results demonstrate that an overall accuracy 92.89 and a kappa coefficient of 0.85 could be achieved. We have shown that connect texture information with the analysis of the local speckle divergence, combining texture and intensity of construction extraction is feasible, efficient and rapid.
Development, scoring, and reliability of the Microscale Audit of Pedestrian Streetscapes (MAPS)
2013-01-01
Background Streetscape (microscale) features of the built environment can influence people’s perceptions of their neighborhoods’ suitability for physical activity. Many microscale audit tools have been developed, but few have published systematic scoring methods. We present the development, scoring, and reliability of the Microscale Audit of Pedestrian Streetscapes (MAPS) tool and its theoretically-based subscales. Methods MAPS was based on prior instruments and was developed to assess details of streetscapes considered relevant for physical activity. MAPS sections (route, segments, crossings, and cul-de-sacs) were scored by two independent raters for reliability analyses. There were 290 route pairs, 516 segment pairs, 319 crossing pairs, and 53 cul-de-sac pairs in the reliability sample. Individual inter-rater item reliability analyses were computed using Kappa, intra-class correlation coefficient (ICC), and percent agreement. A conceptual framework for subscale creation was developed using theory, expert consensus, and policy relevance. Items were grouped into subscales, and subscales were analyzed for inter-rater reliability at tiered levels of aggregation. Results There were 160 items included in the subscales (out of 201 items total). Of those included in the subscales, 80 items (50.0%) had good/excellent reliability, 41 items (25.6%) had moderate reliability, and 18 items (11.3%) had low reliability, with limited variability in the remaining 21 items (13.1%). Seventeen of the 20 route section subscales, valence (positive/negative) scores, and overall scores (85.0%) demonstrated good/excellent reliability and 3 demonstrated moderate reliability. Of the 16 segment subscales, valence scores, and overall scores, 12 (75.0%) demonstrated good/excellent reliability, three demonstrated moderate reliability, and one demonstrated poor reliability. Of the 8 crossing subscales, valence scores, and overall scores, 6 (75.0%) demonstrated good/excellent reliability, and 2 demonstrated moderate reliability. The cul-de-sac subscale demonstrated good/excellent reliability. Conclusions MAPS items and subscales predominantly demonstrated moderate to excellent reliability. The subscales and scoring system represent a theoretically based framework for using these complex microscale data and may be applicable to other similar instruments. PMID:23621947
Proportional crosstalk correction for the segmented clover at iThemba LABS
NASA Astrophysics Data System (ADS)
Bucher, T. D.; Noncolela, S. P.; Lawrie, E. A.; Dinoko, T. R. S.; Easton, J. L.; Erasmus, N.; Lawrie, J. J.; Mthembu, S. H.; Mtshali, W. X.; Shirinda, O.; Orce, J. N.
2017-11-01
Reaching new depths in nuclear structure investigations requires new experimental equipment and new techniques of data analysis. The modern γ-ray spectrometers, like AGATA and GRETINA are now built of new-generation segmented germanium detectors. These most advanced detectors are able to reconstruct the trajectory of a γ-ray inside the detector. These are powerful detectors, but they need careful characterization, since their output signals are more complex. For instance for each γ-ray interaction that occurs in a segment of such a detector additional output signals (called proportional crosstalk), falsely appearing as an independent (often negative) energy depositions, are registered on the non-interacting segments. A failure to implement crosstalk correction results in incorrectly measured energies on the segments for two- and higher-fold events. It affects all experiments which rely on the recorded segment energies. Furthermore incorrectly recorded energies on the segments cause a failure to reconstruct the γ-ray trajectories using Compton scattering analysis. The proportional crosstalk for the iThemba LABS segmented clover was measured and a crosstalk correction was successfully implemented. The measured crosstalk-corrected energies show good agreement with the true γ-ray energies independent on the number of hit segments and an improved energy resolution for the segment sum energy was obtained.
NASA Astrophysics Data System (ADS)
Tuholske, C.; Brooks, T.
2015-12-01
Dengue fever is one of the fastest spreading infectious diseases in Latin America and the Caribbean. As part of a yearlong epidemiological study of dengue, this paper takes the first step to model the relationship between the urban/built environment and incidents of dengue fever in Roatán, Honduras. Roatán has experienced an 80-fold increase in annual tourists since the 1990s, with over 1.2 million people now visiting the island yearly. In tandem, the Caribbean island's population has exploded from fewer than 13,000 people in the 1970s to over 100,000 people today. Using broadband remote sensed satellite imagery, this paper maps and measures how this massive influx of tourists and population has altered the island's landscape. Results from a decision tree classifying technique applied to a Landsat 5 Thematic Mapper (TM) image from 1985 and Landsat 8 Operational Land Imager (OLI) image from 2014 suggest a rapid pace of urbanization; built and impervious surface has increased over 300% in the last 30 years. Emerging research suggests, similar to other mosquito-borne diseases, a correlation between built environment and risk to dengue because of the increase in stagnate water that serve as disease-host reservoirs. This remote sensing analysis will be integrated with georeferenced household level data of cases of dengue collected during a year-long cross-sectional study of dengue patients in Roatán. The result will be to model the relationship between dengue fever and urban/built environment.
Embedded Implementation of VHR Satellite Image Segmentation
Li, Chao; Balla-Arabé, Souleymane; Ginhac, Dominique; Yang, Fan
2016-01-01
Processing and analysis of Very High Resolution (VHR) satellite images provide a mass of crucial information, which can be used for urban planning, security issues or environmental monitoring. However, they are computationally expensive and, thus, time consuming, while some of the applications, such as natural disaster monitoring and prevention, require high efficiency performance. Fortunately, parallel computing techniques and embedded systems have made great progress in recent years, and a series of massively parallel image processing devices, such as digital signal processors or Field Programmable Gate Arrays (FPGAs), have been made available to engineers at a very convenient price and demonstrate significant advantages in terms of running-cost, embeddability, power consumption flexibility, etc. In this work, we designed a texture region segmentation method for very high resolution satellite images by using the level set algorithm and the multi-kernel theory in a high-abstraction C environment and realize its register-transfer level implementation with the help of a new proposed high-level synthesis-based design flow. The evaluation experiments demonstrate that the proposed design can produce high quality image segmentation with a significant running-cost advantage. PMID:27240370
Ward Thompson, Catharine; Curl, Angela; Aspinall, Peter; Alves, Susana; Zuin, Affonso
2014-07-01
The burden of ill-health due to inactivity has recently been highlighted. Better studies on environments that support physical activity are called for, including longitudinal studies of environmental interventions. A programme of residential street improvements in the UK (Sustrans 'DIY Streets') allowed a rare opportunity for a prospective, longitudinal study of the effect of such changes on older adults' activities, health and quality of life. Pre-post, cross-sectional surveys were carried out in locations across England, Wales and Scotland; participants were aged 65+ living in intervention or comparison streets. A questionnaire covered health and quality of life, frequency of outdoor trips, time outdoors in different activities and a 38-item scale on neighbourhood open space. A cohort study explored changes in self-report activity and well-being postintervention. Activity levels were also measured by accelerometer and accompanying diary records. The cross-sectional surveys showed outdoor activity predicted by having a clean, nuisance-free local park, attractive, barrier-free routes to it and other natural environments nearby. Being able to park one's car outside the house also predicted time outdoors. The environmental changes had an impact on perceptions of street walkability and safety at night, but not on overall activity levels, health or quality of life. Participants' moderate-to-vigorous activity levels rarely met UK health recommendations. Our study contributes to methodology in a longitudinal, pre-post design and points to factors in the built environment that support active ageing. We include an example of knowledge exchange guidance on age-friendly built environments for policy-makers and planners. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Ward Thompson, Catharine; Curl, Angela; Aspinall, Peter; Alves, Susana; Zuin, Affonso
2014-01-01
Background The burden of ill-health due to inactivity has recently been highlighted. Better studies on environments that support physical activity are called for, including longitudinal studies of environmental interventions. A programme of residential street improvements in the UK (Sustrans ‘DIY Streets’) allowed a rare opportunity for a prospective, longitudinal study of the effect of such changes on older adults’ activities, health and quality of life. Methods Pre–post, cross-sectional surveys were carried out in locations across England, Wales and Scotland; participants were aged 65+ living in intervention or comparison streets. A questionnaire covered health and quality of life, frequency of outdoor trips, time outdoors in different activities and a 38-item scale on neighbourhood open space. A cohort study explored changes in self-report activity and well-being postintervention. Activity levels were also measured by accelerometer and accompanying diary records. Results The cross-sectional surveys showed outdoor activity predicted by having a clean, nuisance-free local park, attractive, barrier-free routes to it and other natural environments nearby. Being able to park one's car outside the house also predicted time outdoors. The environmental changes had an impact on perceptions of street walkability and safety at night, but not on overall activity levels, health or quality of life. Participants’ moderate-to-vigorous activity levels rarely met UK health recommendations. Conclusions Our study contributes to methodology in a longitudinal, pre–post design and points to factors in the built environment that support active ageing. We include an example of knowledge exchange guidance on age-friendly built environments for policy-makers and planners. PMID:23242959
Climate Change Potential Impacts on the Built Environment and Possible Adaptation Strategies
NASA Technical Reports Server (NTRS)
Quattrochi, Dale A.
2014-01-01
The built environment consists of components that exist at a range of scales from small (e.g., houses, shopping malls) to large (e.g., transportation networks) to highly modified landscapes such as cities. Thus, the impacts of climate change on the built environment may have a multitude of effects on humans and the land. The impact of climate change may be exacerbated by the interaction of different events that singly may be minor, but together may have a synergistic set of impacts that are significant. Also, mechanisms may exist wherein the built environment, particularly in the form of cities, may affect weather and the climate on local and regional scales. Hence, a city may be able to cope with prolonged heat waves, but if this is combined with severe drought, the overall result could be significant or even catastrophic, as accelerating demand for energy to cooling taxes water supplies needed both for energy supply and municipal water needs. This presentation surveys potential climate change impacts on the built environment from the perspective of the National Climate Assessment, and explores adaptation measures that can be employed to mitigate these impacts.
Schoolyard Geology as a Bridge between Urban Thinkers and the Natural World
ERIC Educational Resources Information Center
d'Alessio, Matthew A.
2012-01-01
Students who have a strong urban place-identity may perceive the natural world differently from many geoscience instructors. These urban thinkers have less experience in the natural world and are more comfortable in built environments. They may have subtle differences in cognitive and spatial skill development, interest level in the natural…
Effects of Buffer Size and Shape on Associations between the Built Environment and Energy Balance
Berrigan, David; Hart, Jaime E.; Hipp, J. Aaron; Hoehner, Christine M.; Kerr, Jacqueline; Major, Jacqueline M.; Oka, Masayoshi; Laden, Francine
2014-01-01
Uncertainty in the relevant spatial context may drive heterogeneity in findings on the built environment and energy balance. To estimate the effect of this uncertainty, we conducted a sensitivity analysis defining intersection and business densities and counts within different buffer sizes and shapes on associations with self-reported walking and body mass index. Linear regression results indicated that the scale and shape of buffers influenced study results and may partly explain the inconsistent findings in the built environment and energy balance literature. PMID:24607875
Social vulnerability and the natural and built environment: a model of flood casualties in Texas.
Zahran, Sammy; Brody, Samuel D; Peacock, Walter Gillis; Vedlitz, Arnold; Grover, Himanshu
2008-12-01
Studies on the impacts of hurricanes, tropical storms, and tornados indicate that poor communities of colour suffer disproportionately in human death and injury.(2) Few quantitative studies have been conducted on the degree to which flood events affect socially vulnerable populations. We address this research void by analysing 832 countywide flood events in Texas from 1997-2001. Specifically, we examine whether geographic localities characterised by high percentages of socially vulnerable populations experience significantly more casualties due to flood events, adjusting for characteristics of the natural and built environment. Zero-inflated negative binomial regression models indicate that the odds of a flood casualty increase with the level of precipitation on the day of a flood event, flood duration, property damage caused by the flood, population density, and the presence of socially vulnerable populations. Odds decrease with the number of dams, the level of precipitation on the day before a recorded flood event, and the extent to which localities have enacted flood mitigation strategies. The study concludes with comments on hazard-resilient communities and protection of casualty-prone populations.
Davies, Hugh W.; Frank, Lawrence; Van Loon, Josh; Gehring, Ulrike; Tamburic, Lillian; Brauer, Michael
2014-01-01
Background: Half the world’s population lives in urban areas. It is therefore important to identify characteristics of the built environment that are beneficial to human health. Urban greenness has been associated with improvements in a diverse range of health conditions, including birth outcomes; however, few studies have attempted to distinguish potential effects of greenness from those of other spatially correlated exposures related to the built environment. Objectives: We aimed to investigate associations between residential greenness and birth outcomes and evaluate the influence of spatially correlated built environment factors on these associations. Methods: We examined associations between residential greenness [measured using satellite-derived Normalized Difference Vegetation Index (NDVI) within 100 m of study participants’ homes] and birth outcomes in a cohort of 64,705 singleton births (from 1999–2002) in Vancouver, British Columbia, Canada. We also evaluated associations after adjusting for spatially correlated built environmental factors that may influence birth outcomes, including exposure to air pollution and noise, neighborhood walkability, and distance to the nearest park. Results: An interquartile increase in greenness (0.1 in residential NDVI) was associated with higher term birth weight (20.6 g; 95% CI: 16.5, 24.7) and decreases in the likelihood of small for gestational age, very preterm (< 30 weeks), and moderately preterm (30–36 weeks) birth. Associations were robust to adjustment for air pollution and noise exposures, neighborhood walkability, and park proximity. Conclusions: Increased residential greenness was associated with beneficial birth outcomes in this population-based cohort. These associations did not change after adjusting for other spatially correlated built environment factors, suggesting that alternative pathways (e.g., psychosocial and psychological mechanisms) may underlie associations between residential greenness and birth outcomes. Citation: Hystad P, Davies HW, Frank L, Van Loon J, Gehring U, Tamburic L, Brauer M. 2014. Residential greenness and birth outcomes: evaluating the influence of spatially correlated built-environment factors. Environ Health Perspect 122:1095–1102; http://dx.doi.org/10.1289/ehp.1308049 PMID:25014041
Built Environment Education Program Manual for Teachers and Architects.
ERIC Educational Resources Information Center
American Inst. of Architects, Sacramento, CA. California Council.
This teacher's handbook is designed to educate the city builders of tomorrow about the importance of responsible urban development. The activities stress the relationship between the built and natural environment. The goals of the project emphasize: (1) sensitivity to the importance of working in greater harmony with the total environment; (2)…
Building an EEG-fMRI Multi-Modal Brain Graph: A Concurrent EEG-fMRI Study
Yu, Qingbao; Wu, Lei; Bridwell, David A.; Erhardt, Erik B.; Du, Yuhui; He, Hao; Chen, Jiayu; Liu, Peng; Sui, Jing; Pearlson, Godfrey; Calhoun, Vince D.
2016-01-01
The topological architecture of brain connectivity has been well-characterized by graph theory based analysis. However, previous studies have primarily built brain graphs based on a single modality of brain imaging data. Here we develop a framework to construct multi-modal brain graphs using concurrent EEG-fMRI data which are simultaneously collected during eyes open (EO) and eyes closed (EC) resting states. FMRI data are decomposed into independent components with associated time courses by group independent component analysis (ICA). EEG time series are segmented, and then spectral power time courses are computed and averaged within 5 frequency bands (delta; theta; alpha; beta; low gamma). EEG-fMRI brain graphs, with EEG electrodes and fMRI brain components serving as nodes, are built by computing correlations within and between fMRI ICA time courses and EEG spectral power time courses. Dynamic EEG-fMRI graphs are built using a sliding window method, versus static ones treating the entire time course as stationary. In global level, static graph measures and properties of dynamic graph measures are different across frequency bands and are mainly showing higher values in eyes closed than eyes open. Nodal level graph measures of a few brain components are also showing higher values during eyes closed in specific frequency bands. Overall, these findings incorporate fMRI spatial localization and EEG frequency information which could not be obtained by examining only one modality. This work provides a new approach to examine EEG-fMRI associations within a graph theoretic framework with potential application to many topics. PMID:27733821
Current and future risks of asbestos exposure in the Australian community
2016-01-01
Background Australia mined asbestos for more than 100 years and manufactured and imported asbestos products. There is a legacy of in situ asbestos throughout the built environment. Methods The aim of this study was to identify the possible sources of current and future asbestos exposure from the built environment. Telephone interviews with environmental health officers, asbestos removalists, and asbestos assessors in Australia sought information about common asbestos scenarios encountered. Results There is a considerable amount of asbestos remaining in situ in the Australian built environment. Potential current and future sources of asbestos exposure to the public are from asbestos-containing roofs and fences, unsafe asbestos removal practices, do-it-yourself home renovations and illegal dumping. Conclusion This research has highlighted a need for consistent approaches in the regulation and enforcement of safe practices for the management and removal of asbestos to ensure that in situ asbestos in the built environment is managed appropriately. PMID:27611196
Current and future risks of asbestos exposure in the Australian community.
Gray, Corie; Carey, Renee N; Reid, Alison
2016-10-01
Australia mined asbestos for more than 100 years and manufactured and imported asbestos products. There is a legacy of in situ asbestos throughout the built environment. The aim of this study was to identify the possible sources of current and future asbestos exposure from the built environment. Telephone interviews with environmental health officers, asbestos removalists, and asbestos assessors in Australia sought information about common asbestos scenarios encountered. There is a considerable amount of asbestos remaining in situ in the Australian built environment. Potential current and future sources of asbestos exposure to the public are from asbestos-containing roofs and fences, unsafe asbestos removal practices, do-it-yourself home renovations and illegal dumping. This research has highlighted a need for consistent approaches in the regulation and enforcement of safe practices for the management and removal of asbestos to ensure that in situ asbestos in the built environment is managed appropriately.
The influence of the built environment on adverse birth outcomes.
Woods, N; Gilliland, J; Seabrook, J A
2017-01-01
Adverse birth outcomes are associated with neonatal morbidity and mortality, and higher risk for coronary heart disease, non-insulin-dependent diabetes and hypertension in adulthood. Although there has been considerable research investigating the association between maternal and environmental factors on adverse birth outcomes, one risk factor, not fully understood, is the influence of the built environment. A search of MEDLINE, Scopus, and Cochrane was conducted to find articles assessing the influence of the built environment on preterm birth (PTB), low birth weight (LBW), and small-for-gestational-age (SGA). In total, 41 studies met our inclusion criteria, and were organized into nine categories: Roadways, Greenness, Power Plants, Gas Stations/Wells, Waste Management, Power Lines, Neighborhood Conditions, Food Environment, and Industry. The most common built environmental variable was roads/traffic, encompassing 17/41 (41%) of the articles reviewed, of which 12/17 (71%) found a significant small to moderate association between high traffic exposure and adverse birth outcomes.
Cerin, Ester; Sit, Cindy Hp; Cheung, Man-Chin; Ho, Sai-Yin; Lee, Lok-Chun Janet; Chan, Wai-Man
2010-11-25
The effects of the built environment on walking in seniors have not been studied in an Asian context. To examine these effects, valid and reliable measures are needed. The aim of this study was to develop and validate a questionnaire of perceived neighborhood characteristics related to walking appropriate for Chinese seniors (Neighborhood Environment Walkability Scale for Chinese Seniors, NEWS-CS). It was based on the Neighborhood Environment Walkability Scale - Abbreviated (NEWS-A), a validated measure of perceived built environment developed in the USA for adults. A secondary study aim was to establish the generalizability of the NEWS-A to an Asian high-density urban context and a different age group. A multidisciplinary panel of experts adapted the original NEWS-A to reflect the built environment of Hong Kong and needs of seniors. The translated instrument was pre-tested on a sample of 50 Chinese-speaking senior residents (65+ years). The final version of the NEWS-CS was interviewer-administered to 484 seniors residing in four selected Hong Kong districts varying in walkability and socio-economic status. Ninety-two participants completed the questionnaire on two separate occasions, 2-3 weeks apart. Test-rest reliability indices were estimated for each item and subscale of the NEWS-CS. Confirmatory factor analysis was used to develop the measurement model of the NEWS-CS and cross-validate that of the NEWS-A. The final version of the NEWS-CS consisted of 14 subscales and four single items (76 items). Test-retest reliability was moderate to good (ICC > 50 or % agreement > 60) except for four items measuring distance to destinations. The originally-proposed measurement models of the NEWS-A and NEWS-CS required 2-3 theoretically-justifiable modifications to fit the data well. The NEWS-CS possesses sufficient levels of reliability and factorial validity to be used for measuring perceived neighborhood environment in Chinese seniors. Further work is needed to assess its construct validity and generalizability to other Asian locations. In general, the measurement model of the original NEWS-A was generalizable to this study context, supporting the feasibility of cross-country and age-group comparisons of the effect of the neighborhood environment on walking using the NEWS-A as a tool to measure the perceived built environment.
STS-46 plasma composition measurements using the EOIM-3 mass spectrometer
NASA Technical Reports Server (NTRS)
Hunton, Donald E.; Trzcinski, Edmund; Gosselin, Roger; Koontz, Steven; Leger, Lubert; Visentine, James T.
1995-01-01
One of the active instruments incorporated into the Evaluation of Oxygen Interactions with Materials - 3 experiment was a quadrupole mass spectrometer. The primary objectives for this instrument, which was built by the Air Force Phillips Laboratory and was a veteran of the STS-4 flight in 1982, were to quantify the flux of atomic oxygen striking the test surfaces in the EOIM-3 payload and to detect surface reaction products from the materials in the carousel. Other speakers in this session have covered the results of these experiments. Prior to the 40-hour-long dedicated EOIM-3 mission segment at the end of the STS-46 flight, the authors used the mass spectrometer to make measurements of ion and neutral gas composition in the shuttle environment. About 25 hours of data were collected during a variety of mission events, including Eureca deployment at high altitude and many tethered satellite system operations.
Tribby, Calvin P.; Miller, Harvey J.; Brown, Barbara B.; Smith, Ken R.; Werner, Carol M.
2017-01-01
There is growing international evidence that supportive built environments encourage active travel such as walking. An unsettled question is the role of geographic regions for analyzing the relationship between the built environment and active travel. This paper examines the geographic region question by assessing walking trip models that use two different regions: walking activity spaces and self-defined neighborhoods. We also use two types of built environment metrics, perceived and audit data, and two types of study design, cross-sectional and longitudinal, to assess these regions. We find that the built environment associations with walking are dependent on the type of metric and the type of model. Audit measures summarized within walking activity spaces better explain walking trips compared to audit measures within self-defined neighborhoods. Perceived measures summarized within self-defined neighborhoods have mixed results. Finally, results differ based on study design. This suggests that results may not be comparable among different regions, metrics and designs; researchers need to consider carefully these choices when assessing active travel correlates. PMID:28237743
Hierarchical image feature extraction by an irregular pyramid of polygonal partitions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Skurikhin, Alexei N
2008-01-01
We present an algorithmic framework for hierarchical image segmentation and feature extraction. We build a successive fine-to-coarse hierarchy of irregular polygonal partitions of the original image. This multiscale hierarchy forms the basis for object-oriented image analysis. The framework incorporates the Gestalt principles of visual perception, such as proximity and closure, and exploits spectral and textural similarities of polygonal partitions, while iteratively grouping them until dissimilarity criteria are exceeded. Seed polygons are built upon a triangular mesh composed of irregular sized triangles, whose spatial arrangement is adapted to the image content. This is achieved by building the triangular mesh on themore » top of detected spectral discontinuities (such as edges), which form a network of constraints for the Delaunay triangulation. The image is then represented as a spatial network in the form of a graph with vertices corresponding to the polygonal partitions and edges reflecting their relations. The iterative agglomeration of partitions into object-oriented segments is formulated as Minimum Spanning Tree (MST) construction. An important characteristic of the approach is that the agglomeration of polygonal partitions is constrained by the detected edges; thus the shapes of agglomerated partitions are more likely to correspond to the outlines of real-world objects. The constructed partitions and their spatial relations are characterized using spectral, textural and structural features based on proximity graphs. The framework allows searching for object-oriented features of interest across multiple levels of details of the built hierarchy and can be generalized to the multi-criteria MST to account for multiple criteria important for an application.« less
Curvature-Based Environment Description for Robot Navigation Using Laser Range Sensors
Vázquez-Martín, Ricardo; Núñez, Pedro; Bandera, Antonio; Sandoval, Francisco
2009-01-01
This work proposes a new feature detection and description approach for mobile robot navigation using 2D laser range sensors. The whole process consists of two main modules: a sensor data segmentation module and a feature detection and characterization module. The segmentation module is divided in two consecutive stages: First, the segmentation stage divides the laser scan into clusters of consecutive range readings using a distance-based criterion. Then, the second stage estimates the curvature function associated to each cluster and uses it to split it into a set of straight-line and curve segments. The curvature is calculated using a triangle-area representation where, contrary to previous approaches, the triangle side lengths at each range reading are adapted to the local variations of the laser scan, removing noise without missing relevant points. This representation remains unchanged in translation or rotation, and it is also robust against noise. Thus, it is able to provide the same segmentation results although the scene will be perceived from different viewpoints. Therefore, segmentation results are used to characterize the environment using line and curve segments, real and virtual corners and edges. Real scan data collected from different environments by using different platforms are used in the experiments in order to evaluate the proposed environment description algorithm. PMID:22461732
Hou, Cheng-Bo; Wang, Guo-Peng; Zhang, Qiang; Yang, Wen-Ning; Lv, Bei-Ran; Wei, Li; Dong, Ling
2014-12-01
To illustrate the solubility involved in biopharmaceutics classification system of Chinese materia medica (CMMBCS) , the influences of artificial multicomponent environment on solubility were investigated in this study. Mathematical model was built to describe the variation trend of their influence on the solubility of puerarin. Carried out with progressive levels, single component environment: baicalin, berberine and glycyrrhizic acid; double-component environment: baicalin and glycyrrhizic acid, baicalin and berberine and glycyrrhizic acid and berberine; and treble-component environment: baicalin, berberin, glycyrrhizic acid were used to describe the variation tendency of their influences on the solubility of puerarin, respectively. And then, the mathematical regression equation model was established to characterize the solubility of puerarin under multicomponent environment.
A proposal for an open source graphical environment for simulating x-ray optics
NASA Astrophysics Data System (ADS)
Sanchez del Rio, Manuel; Rebuffi, Luca; Demsar, Janez; Canestrari, Niccolo; Chubar, Oleg
2014-09-01
A new graphic environment to drive X-ray optics simulation packages such as SHADOW and SRW is proposed. The aim is to simulate a virtual experiment, including the description of the electron beam and simulate the emitted radiation, the optics, the scattering by the sample and radiation detection. Python is chosen as common interaction language. The ingredients of the new application, a glossary of variables for optical component, the selection of visualization tools, and the integration of all these components in a high level workflow environment built on Orange are presented.
Giles-Corti, Billie; Kelty, Sally F; Zubrick, Stephen R; Villanueva, Karen P
2009-01-01
In the post-World War II era, there have been dramatic changes to the environment that appear to be having a detrimental impact on the lifestyles and incidental physical activities of young people. These changes are not trivial and have the potential to influence not only physical health, but also mental health and child development. However, the evidence of the impact of the built environment on physical activity to date is inconsistent. This review examines the evidence on the association between the built environment and walking for transport as well as physical activity generally, with a focus on methodological issues that may explain inconsistencies in the literature to date. It appears that many studies fail to measure behaviour-specific environmental correlates, and insufficient attention is being given to differences according to the age of study participants. Higher levels of out-of-school-hours physical activity and walking appear to be significantly associated with higher levels of urban density and neighbourhoods with mixed-use planning, especially for older children and adolescents. Proximate recreational facilities also appear to predict young people's level of physical activity. However, there are inconsistencies in the literature involving studies with younger children. Independent mobility increases with age. For younger children, the impact of the built environment is influenced by the decision-making of parents as the gatekeepers of their behaviour. Cross-cultural differences may also be present and are worthy of greater exploration. As children develop and are given more independent mobility, it appears that the way neighbourhoods are designed - particularly in terms of proximity and connectivity to local destinations, including schools and shopping centres, and the presence of footpaths - becomes a determinant of whether children are able, and are permitted by their parents, to walk and use destinations locally. If older children and adolescents are to enjoy health and developmental benefits of independent mobility, a key priority must be in reducing exposure to traffic and in increasing surveillance on streets (i.e. 'eyes-on-the-street') through neighbourhood and building design, by encouraging others to walk locally, and by discouraging motor vehicle use in favour of walking and cycling. Parents need to be assured that the rights and safety of pedestrians (and cyclists) - particularly child pedestrians and cyclists - are paramount if we are to turn around our 'child-free streets', now so prevalent in contemporary Australian and US cities. There remains a need for more age- and sex-specific research using behaviour- and context-specific measures, with a view to building a more consistent evidence base to inform future environmental interventions.
A Direct Assessment of “Obesogenic” Built Environments: Challenges and Recommendations
Gasevic, Danijela; Vukmirovich, Ina; Yusuf, Salim; Teo, Koon; Chow, Clara; Dagenais, Gilles; Lear, Scott A.
2011-01-01
This paper outlines the challenges faced during direct built environment (BE) assessments of 42 Canadian communities of various income and urbanization levels. In addition, we recommend options for overcoming such challenges during BE community assessments. Direct BE assessments were performed utilizing two distinct audit methods: (1) modified version of Irvine-Minnesota Inventory in which a paper version of an audit tool was used to assess BE features and (2) a Physical Activity and Nutrition Features audit tool, where the presence and positions of all environmental features of interest were recorded using a Global-Positioning-System (GPS) unit. This paper responds to the call for the need of creators and users of environmental audit tools to share experiences regarding the usability of tools for BE assessments. The outlined BE assessment challenges plus recommendations for overcoming them can help improve and refine the existing audit tools and aid researchers in future assessments of the BE. PMID:22174727
U.S. Army Custom Segmentation System
2007-06-01
segmentation is individual or intergroup differences in response to marketing - mix variables. Presumptions about segments: •different demands in a...product or service category, •respond differently to changes in the marketing mix Criteria for segments: •The segments must exist in the environment
Mishra, Ajay; Aloimonos, Yiannis
2009-01-01
The human visual system observes and understands a scene/image by making a series of fixations. Every fixation point lies inside a particular region of arbitrary shape and size in the scene which can either be an object or just a part of it. We define as a basic segmentation problem the task of segmenting that region containing the fixation point. Segmenting the region containing the fixation is equivalent to finding the enclosing contour- a connected set of boundary edge fragments in the edge map of the scene - around the fixation. This enclosing contour should be a depth boundary.We present here a novel algorithm that finds this bounding contour and achieves the segmentation of one object, given the fixation. The proposed segmentation framework combines monocular cues (color/intensity/texture) with stereo and/or motion, in a cue independent manner. The semantic robots of the immediate future will be able to use this algorithm to automatically find objects in any environment. The capability of automatically segmenting objects in their visual field can bring the visual processing to the next level. Our approach is different from current approaches. While existing work attempts to segment the whole scene at once into many areas, we segment only one image region, specifically the one containing the fixation point. Experiments with real imagery collected by our active robot and from the known databases 1 demonstrate the promise of the approach.
ERIC Educational Resources Information Center
Kendall, Sally; Murfield, Jenny; White, Richard; Wilkin, Anne
2007-01-01
"Built environment education" refers to the various types of learning activity for children and young people of school age which use buildings, places and spaces as a context for learning. It covers many different kinds of built settings such as: historic and contemporary; urban and rural; and exceptional and commonplace. It also has a…
Practical Implementation of Semi-Automated As-Built Bim Creation for Complex Indoor Environments
NASA Astrophysics Data System (ADS)
Yoon, S.; Jung, J.; Heo, J.
2015-05-01
In recent days, for efficient management and operation of existing buildings, the importance of as-built BIM is emphasized in AEC/FM domain. However, fully automated as-built BIM creation is a tough issue since newly-constructed buildings are becoming more complex. To manage this problem, our research group has developed a semi-automated approach, focusing on productive 3D as-built BIM creation for complex indoor environments. In order to test its feasibility for a variety of complex indoor environments, we applied the developed approach to model the `Charlotte stairs' in Lotte World Mall, Korea. The approach includes 4 main phases: data acquisition, data pre-processing, geometric drawing, and as-built BIM creation. In the data acquisition phase, due to its complex structure, we moved the scanner location several times to obtain the entire point clouds of the test site. After which, data pre-processing phase entailing point-cloud registration, noise removal, and coordinate transformation was followed. The 3D geometric drawing was created using the RANSAC-based plane detection and boundary tracing methods. Finally, in order to create a semantically-rich BIM, the geometric drawing was imported into the commercial BIM software. The final as-built BIM confirmed that the feasibility of the proposed approach in the complex indoor environment.
Environmental change mediates mate choice for an extended phenotype, but not for mate quality.
Head, Megan L; Fox, Rebecca J; Barber, Iain
2017-01-01
Sexual cues, including extended phenotypes, are expected to be reliable indicators of male genetic quality and/or provide information on parental quality. However, the reliability of these cues may be dependent on stability of the environment, with heterogeneity affecting how selection acts on such traits. Here, we test how environmental change mediates mate choice for multiple sexual traits, including an extended phenotype--the structure of male-built nests - in stickleback fish. First, we manipulated the dissolved oxygen (DO) content of water to create high or low DO environments in which male fish built nests. Then we recorded the mate choice of females encountering these males (and their nests), under either the same or reversed DO conditions. Males in high DO environments built more compact nests than those in low DO conditions and males adjusted their nest structure in response to changing conditions. Female mate choice for extended phenotype (male nests) was environmentally dependent (females chose more compact nests in high DO conditions), while female choice for male phenotype was not (females chose large, vigorous males regardless of DO level). Examining mate choice in this dynamic context suggests that females evaluate the reliability of multiple sexual cues, taking into account environmental heterogeneity. © 2016 The Author(s). Evolution published by Wiley Periodicals, Inc. on behalf of The Society for the Study of Evolution.
Lee, Won-Ho; Lee, Se-Hee; Lee, Sangyoup; Lee, Jong-Chul
2018-09-01
Nanoparticles and nanofluids have been implemented in energy harvesting devices, and energy harvesting based on magnetic nanofluid flow was recently achieved by using a layer-built magnet and micro-bubble injection to induce a voltage on the order of 10-1 mV. However, this is not yet suitable for some commercial purpose. In order to further increase the amount of electric voltage and current from this energy harvesting the air bubbles must be segmented in the base fluid, and the magnetic flux of the segmented flow should be materially altered over time. The focus of this research is on the development of a segmented ferrofluid flow linear generator that would scavenge electrical power from waste heat. Experiments were conducted to obtain the induced voltage, which was generated by moving a ferrofluid-filled capsule inside a multi-turn coil. Computations were then performed to explain the fundamental physical basis of the motion of the segmented flow of the ferrofluids and the air-layers.
Automated construction of arterial and venous trees in retinal images.
Hu, Qiao; Abràmoff, Michael D; Garvin, Mona K
2015-10-01
While many approaches exist to segment retinal vessels in fundus photographs, only a limited number focus on the construction and disambiguation of arterial and venous trees. Previous approaches are local and/or greedy in nature, making them susceptible to errors or limiting their applicability to large vessels. We propose a more global framework to generate arteriovenous trees in retinal images, given a vessel segmentation. In particular, our approach consists of three stages. The first stage is to generate an overconnected vessel network, named the vessel potential connectivity map (VPCM), consisting of vessel segments and the potential connectivity between them. The second stage is to disambiguate the VPCM into multiple anatomical trees, using a graph-based metaheuristic algorithm. The third stage is to classify these trees into arterial or venous (A/V) trees. We evaluated our approach with a ground truth built based on a public database, showing a pixel-wise classification accuracy of 88.15% using a manual vessel segmentation as input, and 86.11% using an automatic vessel segmentation as input.
Cochlea segmentation using iterated random walks with shape prior
NASA Astrophysics Data System (ADS)
Ruiz Pujadas, Esmeralda; Kjer, Hans Martin; Vera, Sergio; Ceresa, Mario; González Ballester, Miguel Ángel
2016-03-01
Cochlear implants can restore hearing to deaf or partially deaf patients. In order to plan the intervention, a model from high resolution µCT images is to be built from accurate cochlea segmentations and then, adapted to a patient-specific model. Thus, a precise segmentation is required to build such a model. We propose a new framework for segmentation of µCT cochlear images using random walks where a region term is combined with a distance shape prior weighted by a confidence map to adjust its influence according to the strength of the image contour. Then, the region term can take advantage of the high contrast between the background and foreground and the distance prior guides the segmentation to the exterior of the cochlea as well as to less contrasted regions inside the cochlea. Finally, a refinement is performed preserving the topology using a topological method and an error control map to prevent boundary leakage. We tested the proposed approach with 10 datasets and compared it with the latest techniques with random walks and priors. The experiments suggest that this method gives promising results for cochlea segmentation.
A Modular Hierarchical Approach to 3D Electron Microscopy Image Segmentation
Liu, Ting; Jones, Cory; Seyedhosseini, Mojtaba; Tasdizen, Tolga
2014-01-01
The study of neural circuit reconstruction, i.e., connectomics, is a challenging problem in neuroscience. Automated and semi-automated electron microscopy (EM) image analysis can be tremendously helpful for connectomics research. In this paper, we propose a fully automatic approach for intra-section segmentation and inter-section reconstruction of neurons using EM images. A hierarchical merge tree structure is built to represent multiple region hypotheses and supervised classification techniques are used to evaluate their potentials, based on which we resolve the merge tree with consistency constraints to acquire final intra-section segmentation. Then, we use a supervised learning based linking procedure for the inter-section neuron reconstruction. Also, we develop a semi-automatic method that utilizes the intermediate outputs of our automatic algorithm and achieves intra-segmentation with minimal user intervention. The experimental results show that our automatic method can achieve close-to-human intra-segmentation accuracy and state-of-the-art inter-section reconstruction accuracy. We also show that our semi-automatic method can further improve the intra-segmentation accuracy. PMID:24491638
The deformation behavior of the cervical spine segment
NASA Astrophysics Data System (ADS)
Kolmakova, T. V.; Rikun, Yu. A.
2017-09-01
The paper describes the model of the cervical spine segment (C3-C4) and the calculation results of its deformation behavior at flexion. The segment model was built based on the experimental literature data taking into account the presence of the cortical and cancellous bone tissue of vertebral bodies. Degenerative changes of the intervertebral disk (IVD) were simulated through a reduction of the disc height and an increase of Young's modulus. The construction of the geometric model of the cervical spine segment and the calculations of the stress-strain state were carried out in the ANSYS software complex. The calculation results show that the biggest protrusion of the IVD in bending direction of segment is observed when IVD height is reduced. The disc protrusion is reduced with an increase of Young's modulus. The largest protrusion in the direction of flexion of the segment is the intervertebral disk with height of 4.3 mm and elastic modulus of 2.5 MPa. The results of the study can be useful to specialists in the field of biomechanics, medical materials science and prosthetics.
Measuring the Built Environment for Physical Activity
Brownson, Ross C.; Hoehner, Christine M.; Day, Kristen; Forsyth, Ann; Sallis, James F.
2009-01-01
Physical inactivity is one of the most important public health issues in the U.S. and internationally. Increasingly, links are being identified between various elements of the physical—or built—environment and physical activity. To understand the impact of the built environment on physical activity, the development of high-quality measures is essential. Three categories of built environment data are being used: (1) perceived measures obtained by telephone interview or self-administered questionnaires; (2) observational measures obtained using systematic observational methods (audits); and (3) archival data sets that are often layered and analyzed with GIS. This review provides a critical assessment of these three types of built-environment measures relevant to the study of physical activity. Among perceived measures, 19 questionnaires were reviewed, ranging in length from 7 to 68 questions. Twenty audit tools were reviewed that cover community environments (i.e., neighborhoods, cities), parks, and trails. For GIS-derived measures, more than 50 studies were reviewed. A large degree of variability was found in the operationalization of common GIS measures, which include population density, land-use mix, access to recreational facilities, and street pattern. This first comprehensive examination of built-environment measures demonstrates considerable progress over the past decade, showing diverse environmental variables available that use multiple modes of assessment. Most can be considered first-generation measures, so further development is needed. In particular, further research is needed to improve the technical quality of measures, understand the relevance to various population groups, and understand the utility of measures for science and public health. PMID:19285216
Ding, Chuan; Chen, Peng; Jiao, Junfeng
2018-03-01
Although a growing body of literature focuses on the relationship between the built environment and pedestrian crashes, limited evidence is provided about the relative importance of many built environment attributes by accounting for their mutual interaction effects and their non-linear effects on automobile-involved pedestrian crashes. This study adopts the approach of Multiple Additive Poisson Regression Trees (MAPRT) to fill such gaps using pedestrian collision data collected from Seattle, Washington. Traffic analysis zones are chosen as the analytical unit. The effects of various factors on pedestrian crash frequency investigated include characteristics the of road network, street elements, land use patterns, and traffic demand. Density and the degree of mixed land use have major effects on pedestrian crash frequency, accounting for approximately 66% of the effects in total. More importantly, some factors show clear non-linear relationships with pedestrian crash frequency, challenging the linearity assumption commonly used in existing studies which employ statistical models. With various accurately identified non-linear relationships between the built environment and pedestrian crashes, this study suggests local agencies to adopt geo-spatial differentiated policies to establish a safe walking environment. These findings, especially the effective ranges of the built environment, provide evidence to support for transport and land use planning, policy recommendations, and road safety programs. Copyright © 2018 Elsevier Ltd. All rights reserved.
Sidawi, Bhzad; Alhariri, Mohamed Taha; Albaker, Walid Ibrahim
2014-01-01
Many studies worldwide have demonstrated the negative impact of an unhealthy built environment on citizens. In the case of diabetes, studies have concentrated on the environmental impact and accessibility issues of a place i.e. the home and neighborhood, whereas few studies have addressed the comfort of the type and spatial arrangement of a household and linked it with the prevalence of diabetes. Also, little research has tackled the place’s impact on diabetic patients and their views concerning their environments. This paper demonstrates the outcomes of survey that was carried out on diabetic individuals who usually visit the King Fahd teaching hospital of the University of Dammam, Al-Khober, the Kingdom of Saudi Arabia (KSA). The patients were surveyed and physically examined. The present researchers found significant links between patients’ diabetes symptoms such as reported paresthesia and blurred vision, and medical investigations results such as lipid profile, blood glucose and blood pressure with the environmental conditions of their homes and neighborhoods. The paper shows that the prevalence of the disease is not only caused by an unhealthy lifestyle but also by an unhealthy built environment. Moreover, it illustrates that unhealthy built environment promotes unhealthy life styles. It makes recommendations on how to improve the built environment in the KSA to be healthier for all citizens including the diabetic patients. PMID:24999135
Engel, L; Chudyk, A M; Ashe, M C; McKay, H A; Whitehurst, D G T; Bryan, S
2016-09-01
The built environment and social cohesion are increasingly recognized as being associated with older adults' quality of life (QoL). However, limited research in this area still exists and the relationship has remained unexplored in the area of Metro Vancouver, Canada. This study examined the association between the built environment and social cohesion with QoL of 160 community-dwelling older adults (aged ≥ 65 years) on low income from Metro Vancouver. Cross-sectional data acquired from the Walk the Talk (WTT) study were used. Health-related QoL (HRQoL) and capability wellbeing were assessed using the EQ-5D-5L and the ICECAP-O, respectively. Measures of the environment comprised the NEWS-A (perceived built environment measure), the Street Smart Walk Score (objective built environment measure), and the SC-5PT (a measure of social cohesion). The primary analysis consists of Tobit regression models to explore the associations between environmental features and HRQoL as well as capability wellbeing. Key findings indicate that after adjusting for covariates, older adults' capability wellbeing was associated with street connectivity and social cohesion, while no statistically significant associations were found between environmental factors and HRQoL. Our results should be considered as hypothesis-generating and need confirmation in a larger longitudinal study. Copyright © 2016 Elsevier Ltd. All rights reserved.
Sidawi, Bhzad; Alhariri, Mohamed Taha; Albaker, Walid Ibrahim
2014-04-14
Many studies worldwide have demonstrated the negative impact of an unhealthy built environment on citizens. In the case of diabetes, studies have concentrated on the environmental impact and accessibility issues of a place i.e. the home and neighborhood, whereas few studies have addressed the comfort of the type and spatial arrangement of a household and linked it with the prevalence of diabetes. Also, little research has tackled the place's impact on diabetic patients and their views concerning their environments. This paper demonstrates the outcomes of survey that was carried out on diabetic individuals who usually visit the King Fahd teaching hospital of the University of Dammam, Al-Khober, the Kingdom of Saudi Arabia (KSA). The patients were surveyed and physically examined. The present researchers found significant links between patients' diabetes symptoms such as reported paresthesia and blurred vision, and medical investigations results such as lipid profile, blood glucose and blood pressure with the environmental conditions of their homes and neighborhoods. The paper shows that the prevalence of the disease is not only caused by an unhealthy lifestyle but also by an unhealthy built environment. Moreover, it illustrates that unhealthy built environment promotes unhealthy life styles. It makes recommendations on how to improve the built environment in the KSA to be healthier for all citizens including the diabetic patients.
Environmental Linguistics: A Typology of Visual Factors in Shopping Malls.
ERIC Educational Resources Information Center
Woods, John D.; Sewell, Edward H., Jr.
Environment may be regarded as a form of communication, with environmental linguistics becoming a new discipline that will have to be explored. Its goal is to demystify some of the constructs that contribute to the built environment as a communication tool. Treating the built environment as a language requires a recognition of its dynamic nature.…
Obesity and the built environment at different urban scales: examining the literature.
Garfinkel-Castro, Andrea; Kim, Keuntae; Hamidi, Shima; Ewing, Reid
2017-01-01
The majority of people now live in an urban (or suburban) environment. The built (material) environment, its vehicular and pedestrian infrastructure, buildings, and public realm places, are the places used for working, living, and recreating. The environment currently favors and facilitates motorized vehicles generally, and private automobiles especially. The prioritization given to vehicles reduces opportunities for other, more active modes of travel such as walking and bicycling. Though the built environment cannot be said to directly affect human obesity, the built environment clearly has a relationship to obesity as a consequence of physical activity. Most concerning is that rates of obesity have risen as cars have become increasingly privileged, leading to places that favor driving over walking or bicycling. This review examines current empirical literature on the environment and obesity at 3 key urban scales: macro, meso, and micro. Other key issues examined include longitudinal studies and self-selection bias. Evidence for a relationship between urban and suburban environments and obesity is found in the literature, but the lack of longitudinal research and research controlling for self-selection bias remains underrepresented. © The Author(s) 2016. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.
Design of an Eye Limiting Resolution Visual System Using Commercial-Off-the-Shelf Equipment
NASA Technical Reports Server (NTRS)
Sweet, Barbara T.; Giovannetti, Dean P.
2008-01-01
A feasibility study was conducted to determine if a flight simulator with an eye-limiting resolution out-the-window (OTW) visual system could be built using commercial off-the-shelf (COTS) technology and used to evaluate the visual performance of Air Force pilots in an operations context. Results of this study demonstrate that an eye limiting OTW visual system can be built using COTS technology. Further, a series of operationally-based tasks linked to clinical vision tests can be used within the synthetic environment to demonstrate a correlation and quantify the level of correlation between vision and operational aviation performance.
Development and Characterization of 6Li-doped Liquid Scintillator Detectors for PROSPECT
NASA Astrophysics Data System (ADS)
Gaison, Jeremy; Prospect Collaboration
2016-09-01
PROSPECT, the Precision Reactor Oscillation and Spectrum experiment, is a phased reactor antineutrino experiment designed to search for eV-scale sterile neutrinos via short-baseline neutrino oscillations and to make a precision measurement of the 235U reactor antineutrino spectrum. A multi-ton, optically segmented detector will be deployed at Oak Ridge National Laboratory's (ORNL) High Flux Isotope Reactor (HFIR) to measure the reactor spectrum at baselines ranging from 7-12m. A two-segment detector prototype with 50 liters of active liquid scintillator target has been built to verify the detector design and to benchmark its performance. In this presentation, we will summarize the performance of this detector prototype and describe the optical and energy calibration of the segmented PROSPECT detectors.
Effects of buffer size and shape on associations between the built environment and energy balance.
James, Peter; Berrigan, David; Hart, Jaime E; Hipp, J Aaron; Hoehner, Christine M; Kerr, Jacqueline; Major, Jacqueline M; Oka, Masayoshi; Laden, Francine
2014-05-01
Uncertainty in the relevant spatial context may drive heterogeneity in findings on the built environment and energy balance. To estimate the effect of this uncertainty, we conducted a sensitivity analysis defining intersection and business densities and counts within different buffer sizes and shapes on associations with self-reported walking and body mass index. Linear regression results indicated that the scale and shape of buffers influenced study results and may partly explain the inconsistent findings in the built environment and energy balance literature. Copyright © 2014 Elsevier Ltd. All rights reserved.
Johnson, Dayna A; Hirsch, Jana A; Moore, Kari A; Redline, Susan; Diez Roux, Ana V
2018-05-01
Although dense neighborhood built environments support increased physical activity and lower obesity, these features may also disturb sleep. Therefore, we sought to understand the association between the built environment and objectively measured sleep. From 2010 to 2013, we analyzed data from examination 5 of the Multi-Ethnic Study of Atherosclerosis, a diverse population from 6 US cities. We fit multilevel models that assessed the association between the built environment (Street Smart Walk Score, social engagement destinations, street intersections, and population density) and sleep duration or efficiency from 1-week wrist actigraphy in 1,889 individuals. After adjustment for covariates, a 1-standard-deviation increase in Street Smart Walk Score was associated with 23% higher odds of short sleep duration (≤6 hours; odds ratio = 1.2, 95% confidence interval: 1.0, 1.4), as well as shorter average sleep duration (mean difference = -8.1 minutes, 95% confidence interval: -12.1, -4.2). Results were consistent across other built environment measures. Associations were attenuated after adjustment for survey-based measure of neighborhood noise. Dense neighborhood development may have multiple health consequence. In promoting denser neighborhoods to increase walkability, it is important to also implement strategies that reduce the adverse impacts of this development on sleep, such as noise reductions efforts.
Mitchell, Christine A; Clark, Andrew F; Gilliland, Jason A
2016-01-15
Neighbourhoods can facilitate or constrain moderate-to-vigorous physical activity (MVPA) among children by providing or restricting opportunities for MVPA. However, there is no consensus on how to define a child's neighbourhood. This study examines the influence of the neighbourhood built environment on objectively measured MVPA among 435 children (aged 9-14 years) in London (ON, Canada). As there is no consensus on how to delineate a child's neighbourhood, a geographic information system was used to generate measures of the neighbourhood built environment at two buffer sizes (500 m and 800 m) around each child's home. Linear regression models with robust standard errors (cluster) were used to analyze the relationship between built environment characteristics and average daily MVPA during non-school hours on weekdays. Sex-stratified models assessed sex-specific relationships. When accounting for individual and neighbourhood socio-demographic variables, park space and multi-use path space were found to influence children's MVPA. Sex-stratified models found significant associations between MVPA and park space, with the 800 m buffer best explaining boys' MVPA and the 500 m buffer best explaining girls' MVPA. Findings emphasize that, when designing built environments, programs, and policies to facilitate physical activity, it is important to consider that the size of the neighbourhood influencing a child's physical activity may differ according to sex.
Helbich, Marco; Emmichoven, Maarten J Zeylmans van; Dijst, Martin J; Kwan, Mei-Po; Pierik, Frank H; Vries, Sanne I de
2016-05-01
Physical inactivity among children is on the rise. Active transport to school (ATS), namely walking and cycling there, adds to children's activity level. Little is known about how exposures along actual routes influence children's transport behavior. This study examined how natural and built environments influence mode choice among Dutch children aged 6-11 years. 623 school trips were tracked with global positioning system. Natural and built environmental exposures were determined by means of a geographic information system and their associations with children's active/passive mode choice were analyzed using mixed models. The actual commuted distance is inversely associated with ATS when only personal, traffic safety, and weather features are considered. When the model is adjusted for urban environments, the results are reversed and distance is no longer significant, whereas well-connected streets and cycling lanes are positively associated with ATS. Neither green space nor weather is significant. As distance is not apparent as a constraining travel determinant when moving through urban landscapes, planning authorities should support children's ATS by providing well-designed cities. Copyright © 2016 Elsevier Ltd. All rights reserved.
Active Travel by Built Environment and Lifecycle Stage: Case Study of Osaka Metropolitan Area
Waygood, E. Owen D.; Sun, Yilin; Letarte, Laurence
2015-01-01
Active travel can contribute to physical activity achieved over a day. Previous studies have examined active travel associated with trips in various western countries, but few studies have examined this question for the Asian context. Japan has high levels of cycling, walking and public transport, similar to The Netherlands. Most studies have focused either on children or on adults separately, however, having children in a household will change the travel needs and wants of that household. Thus, here a household lifecycle stage approach is applied. Further, unlike many previous studies, the active travel related to public transport is included. Lastly, further to examining whether the built environment has an influence on the accumulation of active travel minutes, a binary logistic regression examines the built environment’s influence on the World Health Organization’s recommendations of physical activity. The findings suggest that there is a clear distinction between the urbanized centers and the surrounding towns and unurbanized areas. Further, active travel related to public transport trips is larger than pure walking trips. Females and children are more likely to achieve the WHO recommendations. Finally, car ownership is a strong negative influence. PMID:26694429
Prostate segmentation in MR images using discriminant boundary features.
Yang, Meijuan; Li, Xuelong; Turkbey, Baris; Choyke, Peter L; Yan, Pingkun
2013-02-01
Segmentation of the prostate in magnetic resonance image has become more in need for its assistance to diagnosis and surgical planning of prostate carcinoma. Due to the natural variability of anatomical structures, statistical shape model has been widely applied in medical image segmentation. Robust and distinctive local features are critical for statistical shape model to achieve accurate segmentation results. The scale invariant feature transformation (SIFT) has been employed to capture the information of the local patch surrounding the boundary. However, when SIFT feature being used for segmentation, the scale and variance are not specified with the location of the point of interest. To deal with it, the discriminant analysis in machine learning is introduced to measure the distinctiveness of the learned SIFT features for each landmark directly and to make the scale and variance adaptive to the locations. As the gray values and gradients vary significantly over the boundary of the prostate, separate appearance descriptors are built for each landmark and then optimized. After that, a two stage coarse-to-fine segmentation approach is carried out by incorporating the local shape variations. Finally, the experiments on prostate segmentation from MR image are conducted to verify the efficiency of the proposed algorithms.
An improved pulse coupled neural network with spectral residual for infrared pedestrian segmentation
NASA Astrophysics Data System (ADS)
He, Fuliang; Guo, Yongcai; Gao, Chao
2017-12-01
Pulse coupled neural network (PCNN) has become a significant tool for the infrared pedestrian segmentation, and a variety of relevant methods have been developed at present. However, these existing models commonly have several problems of the poor adaptability of infrared noise, the inaccuracy of segmentation results, and the fairly complex determination of parameters in current methods. This paper presents an improved PCNN model that integrates the simplified framework and spectral residual to alleviate the above problem. In this model, firstly, the weight matrix of the feeding input field is designed by the anisotropic Gaussian kernels (ANGKs), in order to suppress the infrared noise effectively. Secondly, the normalized spectral residual saliency is introduced as linking coefficient to enhance the edges and structural characteristics of segmented pedestrians remarkably. Finally, the improved dynamic threshold based on the average gray values of the iterative segmentation is employed to simplify the original PCNN model. Experiments on the IEEE OTCBVS benchmark and the infrared pedestrian image database built by our laboratory, demonstrate that the superiority of both subjective visual effects and objective quantitative evaluations in information differences and segmentation errors in our model, compared with other classic segmentation methods.
Segmentation of High Angular Resolution Diffusion MRI using Sparse Riemannian Manifold Clustering
Wright, Margaret J.; Thompson, Paul M.; Vidal, René
2015-01-01
We address the problem of segmenting high angular resolution diffusion imaging (HARDI) data into multiple regions (or fiber tracts) with distinct diffusion properties. We use the orientation distribution function (ODF) to represent HARDI data and cast the problem as a clustering problem in the space of ODFs. Our approach integrates tools from sparse representation theory and Riemannian geometry into a graph theoretic segmentation framework. By exploiting the Riemannian properties of the space of ODFs, we learn a sparse representation for each ODF and infer the segmentation by applying spectral clustering to a similarity matrix built from these representations. In cases where regions with similar (resp. distinct) diffusion properties belong to different (resp. same) fiber tracts, we obtain the segmentation by incorporating spatial and user-specified pairwise relationships into the formulation. Experiments on synthetic data evaluate the sensitivity of our method to image noise and the presence of complex fiber configurations, and show its superior performance compared to alternative segmentation methods. Experiments on phantom and real data demonstrate the accuracy of the proposed method in segmenting simulated fibers, as well as white matter fiber tracts of clinical importance in the human brain. PMID:24108748
Machine learning in soil classification.
Bhattacharya, B; Solomatine, D P
2006-03-01
In a number of engineering problems, e.g. in geotechnics, petroleum engineering, etc. intervals of measured series data (signals) are to be attributed a class maintaining the constraint of contiguity and standard classification methods could be inadequate. Classification in this case needs involvement of an expert who observes the magnitude and trends of the signals in addition to any a priori information that might be available. In this paper, an approach for automating this classification procedure is presented. Firstly, a segmentation algorithm is developed and applied to segment the measured signals. Secondly, the salient features of these segments are extracted using boundary energy method. Based on the measured data and extracted features to assign classes to the segments classifiers are built; they employ Decision Trees, ANN and Support Vector Machines. The methodology was tested in classifying sub-surface soil using measured data from Cone Penetration Testing and satisfactory results were obtained.
Molecular mechanisms for protein-encoded inheritance
Wiltzius, Jed J. W.; Landau, Meytal; Nelson, Rebecca; Sawaya, Michael R.; Apostol, Marcin I.; Goldschmidt, Lukasz; Soriaga, Angela B.; Cascio, Duilio; Rajashankar, Kanagalaghatta; Eisenberg, David
2013-01-01
Strains are phenotypic variants, encoded by nucleic acid sequences in chromosomal inheritance and by protein “conformations” in prion inheritance and transmission. But how is a protein “conformation” stable enough to endure transmission between cells or organisms? Here new polymorphic crystal structures of segments of prion and other amyloid proteins offer structural mechanisms for prion strains. In packing polymorphism, prion strains are encoded by alternative packings (polymorphs) of β-sheets formed by the same segment of a protein; in a second mechanism, segmental polymorphism, prion strains are encoded by distinct β-sheets built from different segments of a protein. Both forms of polymorphism can produce enduring “conformations,” capable of encoding strains. These molecular mechanisms for transfer of information into prion strains share features with the familiar mechanism for transfer of information by nucleic acid inheritance, including sequence specificity and recognition by non-covalent bonds. PMID:19684598
Modeling Social Dimensions of Oral Health among Older Adults in Urban Environments
ERIC Educational Resources Information Center
Metcalf, Sara S.; Northridge, Mary E.; Widener, Michael J.; Chakraborty, Bibhas; Marshall, Stephen E.; Lamster, Ira B.
2013-01-01
In both developed and developing countries, population aging has attained unprecedented levels. Public health strategies to deliver services in community-based settings are key to enhancing the utilization of preventive care and reducing costs for this segment of the population. Motivated by concerns of inadequate access to oral health care by…
Outdoor recreation participation trends
H. Ken Cordell; R. Jeff Teasley; John C. Bergstrom; Jack Martin; Jim Bason; Vernon R. Leeworthy
1999-01-01
As part of the national assessment of outdoor recreation trends, the authors have taken a look at participation patterns and levels of participation across activities and across segments of our society. The primary source of data is the National Survey on Recreation and the Environment (NSRE). The NSRE is the latest in the continuing series of National Recreation...
Built Environment and Changes in Blood Pressure in Middle Aged and Older Adults
Li, Fuzhong; Harmer, Peter; Cardinal, Bradley J.; Vongjaturapat, Naruepon
2009-01-01
Objective Few studies have examined interaction effects between person and environment, especially for cardiovascular disease (CVD) risk. The purpose of this study was to examine built environment characteristics and resident health behaviors as they relate to change in blood pressure, an important component of CVD. Methods Participants (N=1,145, aged 50–75 at baseline) were recruited from 120 neighborhoods in Portland, Oregon. Using a longitudinal design, we assessed changes in participants’ systolic and diastolic blood pressure from baseline to 1-year follow-up (2006–2007 to 2007–2008). Independent variables included baseline neighborhood-level measures of GIS-constructed neighborhood walkability and density of fast-food restaurants, and resident-level measures of meeting physical activity recommendations and eating fruits and vegetables. Results There was a small but significant resident-level increase in both systolic and diastolic blood pressure (P<0.001) over the 1-year observation period. A similar trend was also observed at the neighborhood level (P<0.001). Significant differences in change in blood pressure, by neighborhood walkability, were observed, with decreases in systolic and diastolic blood pressure for those living in high walkable neighborhoods (P<0.001). Neighborhoods of low walkability but with a high density of fast-food outlets and residents making visits to fast-food restaurants were significantly associated with increases in blood pressure measures over time. The negative effect of fast-food restaurants on blood pressure was diminished among high-walkable neighborhoods, with benefits observed among residents meeting guidelines for physical activity and eating fruits and vegetables. Conclusions Neighborhoods with high walkability may ameliorate the risk of hypertension at the community level and promotion of neighborhood walkability could play a significant role in improving population health and reducing CVD risk. PMID:19297686
Famous Georgians and Their Homes: A Social Studies Unit for Upper Elementary Students.
ERIC Educational Resources Information Center
Deaver, Susan B.
This upper-elementary level social studies curriculum guide is designed to: (1) teach students to understand and appreciate the built (man made) environment; (2) instruct students about Georgia's history and heritage; and (3) introduce the basic concepts of historic preservation. The unit highlights 10 architectural styles of the homes of famous…
NASA Astrophysics Data System (ADS)
Aziri, Hasif; Patakor, Fizatul Aini; Sulaiman, Marizan; Salleh, Zulhisyam
2017-09-01
This paper presents the simulation of three-phase induction motor drives using Indirect Field Oriented Control (IFOC) in PSIM environment. The asynchronous machine is well known about natural limitations fact of highly nonlinearity and complexity of motor model. In order to resolve these problems, the IFOC is applied to control the instantaneous electrical quantities such as torque and flux component. As FOC is controlling the stator current that represented by a vector, the torque component is aligned with d coordinate while the flux component is aligned with q coordinate. There are five levels of the incremental system are gradually built up to verify and testing the software module in the system. Indeed, all of system build levels are verified and successfully tested in PSIM environment. Moreover, the corresponding system of five build levels are simulated in PSIM environment which is user-friendly for simulation studies in order to explore the performance of speed responses based on IFOC algorithm for three-phase induction motor drives.
Strengthening the weak link: Built Environment modelling for loss analysis
NASA Astrophysics Data System (ADS)
Millinship, I.
2012-04-01
Methods to analyse insured losses from a range of natural perils, including pricing by primary insurers and catastrophe modelling by reinsurers, typically lack sufficient exposure information. Understanding the hazard intensity in terms of spatial severity and frequency is only the first step towards quantifying the risk of a catastrophic event. For any given event we need to know: Are any structures affected? What type of buildings are they? How much damaged occurred? How much will the repairs cost? To achieve this, detailed exposure information is required to assess the likely damage and to effectively calculate the resultant loss. Modelling exposures in the Built Environment therefore plays as important a role in understanding re/insurance risk as characterising the physical hazard. Across both primary insurance books and aggregated reinsurance portfolios, the location of a property (a risk) and its monetary value is typically known. Exactly what that risk is in terms of detailed property descriptors including structure type and rebuild cost - and therefore its vulnerability to loss - is often omitted. This data deficiency is a primary source of variations between modelled losses and the actual claims value. Built Environment models are therefore required at a high resolution to describe building attributes that relate vulnerability to property damage. However, national-scale household-level datasets are often not computationally practical in catastrophe models and data must be aggregated. In order to provide more accurate risk analysis, we have developed and applied a methodology for Built Environment modelling for incorporation into a range of re/insurance applications, including operational models for different international regions and different perils and covering residential, commercial and industry exposures. Illustrated examples are presented, including exposure modelling suitable for aggregated reinsurance analysis for the UK and bespoke high resolution modelling for industrial sites in Germany. A range of attributes are included following detailed claims analysis and engineering research with property type, age and condition identified as important differentiators of damage from flood, wind and freeze events.
Frank, Lawrence Douglas; Saelens, Brian E; Powell, Ken E; Chapman, James E
2007-11-01
Evidence documents associations between neighborhood design and active and sedentary forms of travel. Most studies compare travel patterns for people located in different types of neighborhoods at one point in time adjusting for demographics. Most fail to account for either underlying neighborhood selection factors (reasons for choosing a neighborhood) or preferences (neighborhoods that are preferred) that impact neighborhood selection and behavior. Known as self-selection, this issue makes it difficult to evaluate causation among built form, behavior, and associated outcomes and to know how much more walking and less driving could occur through creating environments conducive to active transport. The current study controls for neighborhood selection and preference and isolates the effect of the built environment on walking, car use, and obesity. Separate analyses were conducted among 2056 persons in the Atlanta, USA based Strategies for Metropolitan Atlanta's Regional Transportation and Air Quality (SMARTRAQ) travel survey on selection factors and 1466 persons in the SMARTRAQ community preference sub-survey. A significant proportion of the population are "mismatched" and do not live in their preferred neighborhood type. Factors influencing neighborhood selection and individual preferences, and current neighborhood walkability explained vehicle travel distance after controlling for demographic variables. Individuals who preferred and lived in a walkable neighborhood walked most (33.9% walked) and drove 25.8 miles per day on average. Individuals that preferred and lived in car dependent neighborhoods drove the most (43 miles per day) and walked the least (3.3%). Individuals that do not prefer a walkable environment walked little and show no change in obesity prevalence regardless of where they live. About half as many participants were obese (11.7%) who prefer and live in walkable environments than participants who prefer car dependent environments (21.6%). Findings suggest that creating walkable environments may result in higher levels of physical activity and less driving and in slightly lower obesity prevalence for those preferring walkability.
Van Dyck, Delfien; Veitch, Jenny; De Bourdeaudhuij, Ilse; Thornton, Lukar; Ball, Kylie
2013-09-19
Women living in socio-economically disadvantaged neighbourhoods are at increased risk for physical inactivity and associated health outcomes and are difficult to reach through personally tailored interventions. Targeting the built environment may be an effective strategy in this population subgroup. The aim of this study was to examine the mediating role of environmental perceptions in the relationship between the objective environment and walking for transportation/recreation among women from socio-economically disadvantaged neighbourhoods. Baseline data of the Resilience for Eating and Activity Despite Inequality (READI) study were used. In total, 4139 women (18-46 years) completed a postal survey assessing physical environmental perceptions (aesthetics, neighbourhood physical activity environment, personal safety, neighbourhood social cohesion), physical activity, and socio-demographics. Objectively-assessed data on street connectivity and density of destinations were collected using a Geographic Information System database and based on the objective z-scores, an objective destinations/connectivity score was calculated. This index was positively scored, with higher scores representing a more favourable environment. Two-level mixed models regression analyses were conducted and the MacKinnon product-of-coefficients test was used to examine the mediating effects. The destinations/connectivity score was positively associated with transport-related walking. The perceived physical activity environment mediated 6.1% of this positive association. The destinations/connectivity score was negatively associated with leisure-time walking. Negative perceptions of aesthetics, personal safety and social cohesion of the neighbourhood jointly mediated 24.1% of this negative association. For women living in socio-economically disadvantaged neighbourhoods, environmental perceptions were important mediators of the relationship between the objective built environment and walking. To increase both transport-related and leisure-time walking, it is necessary to improve both objective walkability-related characteristics (street connectivity and proximity of destinations), and perceptions of personal safety, favourable aesthetics and neighbourhood social cohesion.
An argument for the use of multiple segment stents in curved arteries.
Kasiri, Saeid; Kelly, Daniel J
2011-08-01
Stenting of curved arteries is generally perceived to be more challenging than straight vessels. Conceptually implanting multiple shorter stents rather than a single longer stent into such a curved artery represents a promising concept, but little is known about the impact of such an approach. The objective of this study is to evaluate the effectiveness of using a multiple segment stent rather than a single long stent to dilate a curved artery using the finite element method. A double segment stent (DSS) and a single segment stent (SSS) were modeled. The stents were compared when expanded into a model of a curved artery. The model predicts that the DSS provides higher flexibility, more conformity, and lower recoil in comparison to the SSS. The volume of arterial tissue experiencing high levels of stress due to stent implantation is also reduced for the DSS. It is suggested that a multiple segment stenting system is a potential solution to the problem of higher rates of in-stent restenosis in curved arteries and mechanically challenging environments.
Mazzei, Francesco; Gillan, Roslyn; Cloutier, Denise
2014-06-01
Limited research explores the experience of individuals with dementia in acute care geriatric psychiatry units. This observational case study examines the influence of the physical environment on behavior (wandering, pacing, door testing, congregation and seclusions) among residents in a traditional geriatric psychiatry unit who were then relocated to a purpose-built acute care unit. Purpose-built environments should be well suited to the needs of residents with dementia. Observed trends revealed differences in spatial behaviors in the pre- and post- environments attributable to the physical environment. Person-centred modifications to the current environment including concerted efforts to know residents are meaningful in fostering quality of life. Color coded environments (rooms vs dining areas etc.) to improve wayfinding and opportunities to personalize rooms that address the `hominess' of the setting also have potential. Future research could also seek the opinions of staff about the impact of the environment on them as well as residents. © The Author(s) 2013.
Bacteriophages as indicators of faecal pollution and enteric virus removal.
McMinn, B R; Ashbolt, N J; Korajkic, A
2017-07-01
Bacteriophages are an attractive alternative to faecal indicator bacteria (FIB), particularly as surrogates of enteric virus fate and transport, due to their closer morphological and biological properties. Based on a review of published data, we summarize densities of coliphages (F+ and somatic), Bacteroides spp. and enterococci bacteriophages (phages) in individual human waste, raw wastewater, ambient fresh and marine waters and removal through wastewater treatment processes utilizing traditional treatments. We also provide comparisons with FIB and enteric viruses whenever possible. Lastly, we examine fate and transport characteristics in the aquatic environment and provide an overview of the environmental factors affecting their survival. In summary, concentrations of bacteriophages in various sources were consistently lower than FIB, but more reflective of infectious enteric virus levels. Overall, our investigation indicates that bacteriophages may be adequate viral surrogates, especially in built systems, such as wastewater treatment plants. Bacteriophage are alternative fecal indicators that may be better surrogates for viral pathogens than fecal indicator bacteria (FIB). This report offers a summary of the existing literature concerning the utility of bacteriophage as indicators of viral presence (fecal sources and surface waters) and persistence (in built infrastructure and aquatic environments). Our findings indicate that bacteriophage levels in all matrices examined are consistently lower than FIB, but similar to viral pathogens. Furthermore, in built infrastructure (e.g. wastewater treatment systems) bacteriophage closely mimic viral pathogen persistence suggesting they may be adequate sentinels of enteric virus removal. © 2017 The Society for Applied Microbiology.
Real, Kevin; Bardach, Shoshana H; Bardach, David R
2017-12-01
Increasingly, health communication scholars are attending to how hospital built environments shape communication, patient care processes, and patient outcomes. This multimethod study was conducted on two floors of a newly designed urban hospital. Nine focus groups interviews were conducted with 35 health care professionals from 10 provider groups. Seven of the groups were homogeneous by profession or level: nursing (three groups), nurse managers (two groups), and one group each of nurse care technicians ("techs") and physicians. Two mixed groups were comprised of staff from pharmacy, occupational therapy, patient care facilitators, physical therapy, social work, and pastoral care. Systematic qualitative analysis was conducted using a conceptual framework based on systems theory and prior health care design and communication research. Additionally, quantitative modeling was employed to assess walking distances in two different hospital designs. Results indicate nurses walked significantly more in the new hospital environment. Qualitative analysis revealed three insights developed in relationship to system structures, processes, and outcomes. First, decentralized nurse stations changed system interdependencies by reducing nurse-to-nurse interactions and teamwork while heightening nurse interdependencies and teamwork with other health care occupations. Second, many nursing-related processes remained centralized while nurse stations were decentralized, creating systems-based problems for nursing care. Third, nursing communities of practices were adversely affected by the new design. Implications of this study suggest that nurse station design shapes communication, patient care processes, and patient outcomes. Further, it is important to understand how the built environment, often treated as invisible in communication research, is crucial to understanding communication within complex health care systems.
Masters, Rich; Capio, Catherine; Poolton, Jamie; Uiga, Liis
2018-06-01
Re-engineering the built environment to influence behaviors associated with physical activity potentially provides an opportunity to promote healthier lifestyles at a population level. Here we present evidence from two quasi-experimental field studies in which we tested a novel, yet deceptively simple, intervention designed to alter perception of, and walking behavior associated with, stairs in an urban area. Our objectives were to examine whether adjusting a stair banister has an influence on perceptions of stair steepness or on walking behavior when approaching the stairs. In study 1, we asked participants (n = 143) to visually estimate the steepness of a set of stairs viewed from the top, when the stair banister was adjusted so that it converged with or diverged from the stairs (± 1.91°) or remained neutral (± 0°). In study 2, the walking behavior of participants (n = 36) was filmed as they approached the stairs to descend, unaware of whether the banister converged, diverged, or was neutral. In study 1, participants estimated the stairs to be steeper if the banister diverged from, rather than converged with, the stairs. The effect was greater when participants were unaware of the adjustment. In study 2, walking speed was significantly slower when the banister diverged from, rather than converged with, the stairs. These findings encourage us to speculate about the potential to economically re-engineer features of the built environment to provide opportunities for action (affordances) that invite physical activity behavior or even promote safer navigation of the environment.
Hanson, Heather M; Schiller, Claire; Winters, Meghan; Sims-Gould, Joanie; Clarke, Philippa; Curran, Eileen; Donaldson, Meghan G; Pitman, Beverley; Scott, Vicky; McKay, Heather A; Ashe, Maureen C
2013-12-01
For older adults, the ability to navigate walking routes in the outdoor environment allows them to remain active and socially engaged, facilitating community participation and independence. In order to enhance outdoor walking, it is important to understand the interaction of older adults within their local environments and the influence of broader stakeholder priorities that impact these environments. Thus, we aimed to synthesize perspectives from stakeholders to identify elements of the built and social environments that influence older adults' ability to walk outdoors. We applied a concept mapping approach with the input of diverse stakeholders (N=75) from British Columbia, Canada in 2012. A seven-cluster map best represented areas that influence older adults' outdoor walking. Priority areas identified included sidewalks, crosswalks, and neighborhood features. Individual perceptions and elements of the built and social environments intersect to influence walking behaviors, although targeted studies that address this area are needed. © 2013.
Salvo, Grazia; Doyle-Baker, Patricia K.; McCormack, Gavin R.
2018-01-01
Qualitative studies can provide important information about how and why the built environment impacts physical activity decision-making—information that is important for informing local urban policies. We undertook a systematized literature review to synthesize findings from qualitative studies exploring how the built environment influences physical activity in adults. Our review included 36 peer-reviewed qualitative studies published from 1998 onwards. Our findings complemented existing quantitative evidence and provided additional insight into how functional, aesthetic, destination, and safety built characteristics influence physical activity decision-making. Sociodemographic characteristics (age, sex, ethnicity, and socioeconomic status) also impacted the BE’s influence on physical activity. Our review findings reinforce the need for synergy between transportation planning, urban design, landscape architecture, road engineering, parks and recreation, bylaw enforcement, and public health to be involved in creating neighbourhood environments that support physical activity. Our findings support a need for local neighbourhood citizens and associations with representation from individuals and groups with different sociodemographic backgrounds to have input into neighbourhood environment planning process. PMID:29724048
Universal Design: A Step toward Successful Aging
Carr, Kelly; Weir, Patricia L.; Azar, Dory; Azar, Nadia R.
2013-01-01
The concept of aging successfully has become increasingly important as demographics shift towards an aging population. Successful aging has been defined to include (1) a low probability of disease and disease-related disability; (2) a high level of physical and cognitive functioning; and (3) an active engagement in life. The built environment can create opportunities or constraints for seniors to participate in social and productive activities. Universally designed spaces are more easily accessed and used by a spectrum of people without specialized adaptations. Thus, a universally designed environment creates opportunities for older adults to participate in these activities without the stigmatization associated with adapted or accessible designs. Providing older adults with specific universal design options (e.g., lever handle faucets) has the potential to increase the ease of completing activities of daily living, which promotes a continual engagement in life. Literature regarding universal design is promising; however, its theory requires further attention from professionals designing the built environment, evidence of the significance of its application from academics, and the embracement of its core principles from society. Overall, universal design has the potential to provide a stepping stone toward successful aging. PMID:23431446
Impacts of Trees on Urban Environment in the Contiguous United States
NASA Astrophysics Data System (ADS)
Wang, C.; Upreti, R.; Wang, Z.; Yang, J.
2017-12-01
Mounting empirical evidence shows that urban trees are effective in mitigating the thermal stress in the built environment, whereas large scale numerical simulations remain scarce. In this study, we evaluated the effects of shade trees on the built environment in terms of radiative cooling, pedestrian thermal comfort, and surface energy balance, carried out over the contiguous United States (CONUS). A coupled Weather Research and Forecasting-urban modeling system was adopted, incorporating exclusively the radiative shading effect of urban trees. Results show that on average the mean 2-m air temperature in urban areas decreases by 3.06 ˚C, and the 2-m relative humidity increases by 13.62% over the entire CONUS with the shading effect. Analysis of pedestrian thermal comfort shows that shade trees help to improve summer thermal comfort level, but could be detrimental in the winter for Northern cities. In addition, it was found that trees alter the surface energy balance by primarily enhancing the radiative cooling, leading to significant re-distribution of the sensible heat while leaving the ground heat storage comparatively intact.
Quantifying the Modern City: Emerging Technologies and Big Data for Active Living Research
Adlakha, Deepti
2017-01-01
Opportunities and infrastructure for active living are an important aspect of a community’s design, livability, and health. Features of the built environment influence active living and population levels of physical activity, but objective study of the built environment influence on active living behaviors is challenging. The use of emerging technologies for active living research affords new and promising means to obtain objective data on physical activity behaviors and improve the precision and accuracy of measurements. This is significant for physical activity promotion because precise measurements can enable detailed examinations of where, when, and how physical activity behaviors actually occur, thus enabling more effective targeting of particular behavior settings and environments. The aim of this focused review is to provide an overview of trends in emerging technologies that can profoundly change our ability to understand environmental determinants of active living. It discusses novel technological approaches and big data applications to measure and track human behaviors that may have broad applications across the fields of urban planning, public health, and spatial epidemiology. PMID:28611973
Berry, Meredith S.; Repke, Meredith A.; Nickerson, Norma P.; Conway, Lucian G.; Odum, Amy L.; Jordan, Kerry E.
2015-01-01
Impulsivity in delay discounting is associated with maladaptive behaviors such as overeating and drug and alcohol abuse. Researchers have recently noted that delay discounting, even when measured by a brief laboratory task, may be the best predictor of human health related behaviors (e.g., exercise) currently available. Identifying techniques to decrease impulsivity in delay discounting, therefore, could help improve decision-making on a global scale. Visual exposure to natural environments is one recent approach shown to decrease impulsive decision-making in a delay discounting task, although the mechanism driving this result is currently unknown. The present experiment was thus designed to evaluate not only whether visual exposure to natural (mountains, lakes) relative to built (buildings, cities) environments resulted in less impulsivity, but also whether this exposure influenced time perception. Participants were randomly assigned to either a natural environment condition or a built environment condition. Participants viewed photographs of either natural scenes or built scenes before and during a delay discounting task in which they made choices about receiving immediate or delayed hypothetical monetary outcomes. Participants also completed an interval bisection task in which natural or built stimuli were judged as relatively longer or shorter presentation durations. Following the delay discounting and interval bisection tasks, additional measures of time perception were administered, including how many minutes participants thought had passed during the session and a scale measurement of whether time "flew" or "dragged" during the session. Participants exposed to natural as opposed to built scenes were less impulsive and also reported longer subjective session times, although no differences across groups were revealed with the interval bisection task. These results are the first to suggest that decreased impulsivity from exposure to natural as opposed to built environments may be related to lengthened time perception. PMID:26558610
George, Emma S.; Feng, Xiaoqi; Merom, Dafna; Bennie, Andrew; Cook, Amelia; Dwyer, Genevieve; Pang, Bonnie; Astell-Burt, Thomas
2018-01-01
Physical activity and diet are major modifiable risk factors for chronic disease and have been shown to be associated with neighborhood built environment. Systematic review evidence from longitudinal studies on the impact of changing the built environment on physical activity and diet is currently lacking. A systematic review of natural experiments of neighborhood built environment was conducted. The aims of this systematic review were to summarize study characteristics, study quality, and impact of changes in neighborhood built environment on physical activity and diet outcomes among residents. Natural experiments of neighborhood built environment change, exploring longitudinal impacts on physical activity and/or diet in residents, were included. From five electronic databases, 2084 references were identified. A narrative synthesis was conducted, considering results in relation to study quality. Nineteen papers, reporting on 15 different exposures met inclusion criteria. Four studies included a comparison group and 11 were pre-post/longitudinal studies without a comparison group. Studies reported on the impact of redeveloping or introducing cycle and/or walking trails (n = 5), rail stops/lines (n = 4), supermarkets and farmers’ markets (n = 4) and park and green space (n = 2). Eight/15 studies reported at least one beneficial change in physical activity, diet or another associated health outcome. Due to limitations in study design and reporting, as well as the wide array of outcome measures reported, drawing conclusions to inform policy was challenging. Future research should consider a consistent approach to measure the same outcomes (e.g., using measurement methods that collect comparable physical activity and diet outcome data), to allow for pooled analyses. Additionally, including comparison groups wherever possible and ensuring high quality reporting is essential. PMID:29373567
MacMillan, Freya; George, Emma S; Feng, Xiaoqi; Merom, Dafna; Bennie, Andrew; Cook, Amelia; Sanders, Taren; Dwyer, Genevieve; Pang, Bonnie; Guagliano, Justin M; Kolt, Gregory S; Astell-Burt, Thomas
2018-01-26
Physical activity and diet are major modifiable risk factors for chronic disease and have been shown to be associated with neighborhood built environment. Systematic review evidence from longitudinal studies on the impact of changing the built environment on physical activity and diet is currently lacking. A systematic review of natural experiments of neighborhood built environment was conducted. The aims of this systematic review were to summarize study characteristics, study quality, and impact of changes in neighborhood built environment on physical activity and diet outcomes among residents. Natural experiments of neighborhood built environment change, exploring longitudinal impacts on physical activity and/or diet in residents, were included. From five electronic databases, 2084 references were identified. A narrative synthesis was conducted, considering results in relation to study quality. Nineteen papers, reporting on 15 different exposures met inclusion criteria. Four studies included a comparison group and 11 were pre-post/longitudinal studies without a comparison group. Studies reported on the impact of redeveloping or introducing cycle and/or walking trails ( n = 5), rail stops/lines ( n = 4), supermarkets and farmers' markets ( n = 4) and park and green space ( n = 2). Eight/15 studies reported at least one beneficial change in physical activity, diet or another associated health outcome. Due to limitations in study design and reporting, as well as the wide array of outcome measures reported, drawing conclusions to inform policy was challenging. Future research should consider a consistent approach to measure the same outcomes (e.g., using measurement methods that collect comparable physical activity and diet outcome data), to allow for pooled analyses. Additionally, including comparison groups wherever possible and ensuring high quality reporting is essential.
Dubé, Anne Sophie; Beausoleil, Maude; Gosselin, Céline; Beaulme, Ginette; Paquin, Sophie; Pelletier, Anne; Goudreau, Sophie; Poirier, Marie-Hélène; Drouin, Louis; Gauvin, Lise
2014-07-09
1) To describe grassroots projects aimed at the built environment and associated with active transportation on the Island of Montreal; and 2) to examine associations between the number of projects and indicators of neighbourhood material and social deprivation and the built environment. We identified funding agencies and community groups conducting projects on built environments throughout the Island of Montreal. Through website consultation and a snowballing procedure, we inventoried projects that aimed at transforming built environments and that were carried out by community organizations between January 1, 2006, and November 1, 2010. We coded and validated information about project activities and created an interactive map using Geoclip software. Correlational analyses quantified associations between number of projects, neighbourhood characteristics and deprivation. A total of 134 community organizations were identified, and 183 grassroots projects were inventoried. A large number of projects were aimed at increasing awareness of/improving active or public transportation (n=95), improving road safety (n=84) and enhancing neighbourhood beautification and greening (n=69). The correlation between the presence of projects and the extent of neighbourhood material deprivation was small (Kendall's t=0.26, p<0.001), but in areas with greater social deprivation there were more projects (Kendall's t=0.38, p<0.001). Larger numbers of projects were also associated with the presence of more extensive land-use mix (Kendall's t=0.23, p<0.001) and a greater proportion of road intersections with injured pedestrians, cyclists and motor vehicle users (Kendall's t=0.43, p<0.001). There is significant community mobilization around built environments and active transportation. Investigations of the implementation processes and impacts are warranted.
Villanueva, Karen; Pereira, Gavin; Knuiman, Matthew; Bull, Fiona; Wood, Lisa; Christian, Hayley; Foster, Sarah; Boruff, Bryan J; Beesley, Bridget; Hickey, Sharyn; Joyce, Sarah; Nathan, Andrea; Saarloos, Dick; Giles-Corti, Billie
2013-01-01
Introduction The built environment is increasingly recognised as being associated with health outcomes. Relationships between the built environment and health differ among age groups, especially between children and adults, but also between younger, mid-age and older adults. Yet few address differences across life stage groups within a single population study. Moreover, existing research mostly focuses on physical activity behaviours, with few studying objective clinical and mental health outcomes. The Life Course Built Environment and Health (LCBEH) project explores the impact of the built environment on self-reported and objectively measured health outcomes in a random sample of people across the life course. Methods and analysis This cross-sectional data linkage study involves 15 954 children (0–15 years), young adults (16–24 years), adults (25–64 years) and older adults (65+years) from the Perth metropolitan region who completed the Health and Wellbeing Surveillance System survey administered by the Department of Health of Western Australia from 2003 to 2009. Survey data were linked to Western Australia's (WA) Hospital Morbidity Database System (hospital admission) and Mental Health Information System (mental health system outpatient) data. Participants’ residential address was geocoded and features of their ‘neighbourhood’ were measured using Geographic Information Systems software. Associations between the built environment and self-reported and clinical health outcomes will be explored across varying geographic scales and life stages. Ethics and dissemination The University of Western Australia's Human Research Ethics Committee and the Department of Health of Western Australia approved the study protocol (#2010/1). Findings will be published in peer-reviewed journals and presented at local, national and international conferences, thus contributing to the evidence base informing the design of healthy neighbourhoods for all residents. PMID:23325897
2008-07-01
level information including: 1) previously collected geographic information systems (GIS) data about the social and built environment; and 2) telephone...feedback as well as received IRB approvals on the instruments; and translated and back-translated all of the instruments into Mandarin and Cantonese ...guides • Translated and back-translated all of the instruments into Mandarin and Cantonese Chinese, and Spanish • Developed a study protocol that
Christian, Hayley; Zubrick, Stephen R; Foster, Sarah; Giles-Corti, Billie; Bull, Fiona; Wood, Lisa; Knuiman, Matthew; Brinkman, Sally; Houghton, Stephen; Boruff, Bryan
2015-05-01
This review examines evidence of the association between the neighborhood built environment, green spaces and outdoor home area, and early (0-7 years) child health and development. There was evidence that the presence of child relevant neighborhood destinations and services were positively associated with early child development domains of physical health and wellbeing and social competence. Parents׳ perceptions of neighborhood safety were positively associated with children׳s social-emotional development and general health. Population representative studies using objective measures of the built environment and valid measures of early child development are warranted to understand the impact of the built environment on early child health and development. Copyright © 2015 Elsevier Ltd. All rights reserved.
DOT National Transportation Integrated Search
2013-03-01
Much of the research on accessibility and the built environment performed to date have been : conducted in urban settings and most have focused on adults. Few studies addressing this topic : have concerned areas with low population density and fewer ...
Towards Entrepreneurial Learning Competencies: The Perspective of Built Environment Students
ERIC Educational Resources Information Center
Ernest, Kissi; Matthew, Somiah K.; Samuel, Ansah K.
2015-01-01
This paper sought to discuss entrepreneurial learning competencies by determining the outcome of entrepreneurial learning on the views of built environment students in the university setting. In this study, three relevant competencies were identified for entrepreneurial learning through literature, namely: entrepreneurial attitude, entrepreneurial…
HABIB, RIMA R.; BASMA, SHIRAZ H.; YERETZIAN, JOUMANA S.
2007-01-01
This research examined the association between the domestic built environment in a Palestinian refugee camp in Beirut, Lebanon, and the presence of illness among household members. Data on the domestic built environment, socio-demographics and health were collected in 860 households. The association between the presence of illness among household members and three environmental indices, namely infrastructure and services, housing conditions, and crowding was evaluated. These indices were based on a number of items that reflected the existing problems in the domestic built environment. The main finding was the positive association between poor housing conditions and the presence of illness among household members. Households with 8-15 housing problems were twice more likely to report the presence of illness than those with less than four housing problems (OR = 2.08, 95% CI = 1.40-3.11). This research contributes to the understanding of the influence of the built environment on the health of a refugee population. PMID:16546804
NASA Astrophysics Data System (ADS)
Jin, Dakai; Guo, Junfeng; Dougherty, Timothy M.; Iyer, Krishna S.; Hoffman, Eric A.; Saha, Punam K.
2016-03-01
Pulmonary vascular dysfunction has been implicated in smoking-related susceptibility to emphysema. With the growing interest in characterizing arterial morphology for early evaluation of the vascular role in pulmonary diseases, there is an increasing need for the standardization of a framework for arterial morphological assessment at airway segmental levels. In this paper, we present an effective and robust semi-automatic framework to segment pulmonary arteries at different anatomic airway branches and measure their cross-sectional area (CSA). The method starts with user-specified endpoints of a target arterial segment through a custom-built graphical user interface. It then automatically detect the centerline joining the endpoints, determines the local structure orientation and computes the CSA along the centerline after filtering out the adjacent pulmonary structures, such as veins or airway walls. Several new techniques are presented, including collision-impact based cost function for centerline detection, radial sample-line based CSA computation, and outlier analysis of radial distance to subtract adjacent neighboring structures in the CSA measurement. The method was applied to repeat-scan pulmonary multirow detector CT (MDCT) images from ten healthy subjects (age: 21-48 Yrs, mean: 28.5 Yrs; 7 female) at functional residual capacity (FRC). The reproducibility of computed arterial CSA from four airway segmental regions in middle and lower lobes was analyzed. The overall repeat-scan intra-class correlation (ICC) of the computed CSA from all four airway regions in ten subjects was 96% with maximum ICC found at LB10 and RB4 regions.
Wang, Ling; Abdel-Aty, Mohamed; Wang, Xuesong; Yu, Rongjie
2018-02-01
There have been plenty of traffic safety studies based on average daily traffic (ADT), average hourly traffic (AHT), or microscopic traffic at 5 min intervals. Nevertheless, not enough research has compared the performance of these three types of safety studies, and seldom of previous studies have intended to find whether the results of one type of study is transferable to the other two studies. First, this study built three models: a Bayesian Poisson-lognormal model to estimate the daily crash frequency using ADT, a Bayesian Poisson-lognormal model to estimate the hourly crash frequency using AHT, and a Bayesian logistic regression model for the real-time safety analysis using microscopic traffic. The model results showed that the crash contributing factors found by different models were comparable but not the same. Four variables, i.e., the logarithm of volume, the standard deviation of speed, the logarithm of segment length, and the existence of diverge segment, were positively significant in the three models. Additionally, weaving segments experienced higher daily and hourly crash frequencies than merge and basic segments. Then, each of the ADT-based, AHT-based, and real-time models was used to estimate safety conditions at different levels: daily and hourly, meanwhile, the real-time model was also used in 5 min intervals. The results uncovered that the ADT- and AHT-based safety models performed similar in predicting daily and hourly crash frequencies, and the real-time safety model was able to provide hourly crash frequency. Copyright © 2017 Elsevier Ltd. All rights reserved.
Teedon, Paul; Gillespie, Morag; Lindsay, Kate; Baker, Keith
2014-07-01
The built environment is important for children׳s health and development. Qualitative research in four communities in Scotland explored with groups of parents of young children their lay perceptions of their local environment with specific reference to its impact upon their children׳s health. Valuing most strong supportive communities; good quality public spaces and social housing, parents׳ key concerns included anti-social behaviour, incivility and a range of locally-specific concerns. As knowledgeable key gatekeepers to children׳s use of home environments and public spaces, parent׳s qualitative lay input is important for the development of children׳s effective use of outdoor spaces and the built environment over the long term. Copyright © 2014 Elsevier Ltd. All rights reserved.
RED or READ: the built environment is colored
NASA Astrophysics Data System (ADS)
Smith, Dianne
2002-06-01
How important is color in the design of our built environment? Prototypes and massing models for designs are often presented in white or monochromatic combinations, irrespective of the materials incorporated and the colors that may be applied in the final constructed building, interior or object. Therefore, it is of interest to identify the way color is positioned by designers in how they go about the business of making environments. The built environment is understood by the designers and design researchers generally in one of four fields - as object, as product, as communicator, or as social domain. In addition, Franz identified four conceptions of designing held by designers - the experiential conception, the structural conception, the production conception and the retail conception. Fashion and style are often associated with color in a local context and may simply be applied to the physical environment because it is in fashion, rather than because of what it communicates more broadly. It is assumed that the integration of color in the built environment is influenced by these understandings. In order to address color's position in the design process and the importance of color in relation to space, form, and the experience of place, a selection of Queensland architects and interior designers were surveyed. The study is not conclusive, however, it does identify differences and commonalities between the participants that are of interest in light of the above issues. Explorations into environmental meaning, in addition to color theory and decorative applications, are hypothesized to be important sources of information for designers involved in the coloration of the built environment.
Checinska, Aleksandra; Probst, Alexander J; Vaishampayan, Parag; White, James R; Kumar, Deepika; Stepanov, Victor G; Fox, George E; Nilsson, Henrik R; Pierson, Duane L; Perry, Jay; Venkateswaran, Kasthuri
2015-10-27
The International Space Station (ISS) is a unique built environment due to the effects of microgravity, space radiation, elevated carbon dioxide levels, and especially continuous human habitation. Understanding the composition of the ISS microbial community will facilitate further development of safety and maintenance practices. The primary goal of this study was to characterize the viable microbiome of the ISS-built environment. A second objective was to determine if the built environments of Earth-based cleanrooms associated with space exploration are an appropriate model of the ISS environment. Samples collected from the ISS and two cleanrooms at the Jet Propulsion Laboratory (JPL, Pasadena, CA) were analyzed by traditional cultivation, adenosine triphosphate (ATP), and propidium monoazide-quantitative polymerase chain reaction (PMA-qPCR) assays to estimate viable microbial populations. The 16S rRNA gene Illumina iTag sequencing was used to elucidate microbial diversity and explore differences between ISS and cleanroom microbiomes. Statistical analyses showed that members of the phyla Actinobacteria, Firmicutes, and Proteobacteria were dominant in the samples examined but varied in abundance. Actinobacteria were predominant in the ISS samples whereas Proteobacteria, least abundant in the ISS, dominated in the cleanroom samples. The viable bacterial populations seen by PMA treatment were greatly decreased. However, the treatment did not appear to have an effect on the bacterial composition (diversity) associated with each sampling site. The results of this study provide strong evidence that specific human skin-associated microorganisms make a substantial contribution to the ISS microbiome, which is not the case in Earth-based cleanrooms. For example, Corynebacterium and Propionibacterium (Actinobacteria) but not Staphylococcus (Firmicutes) species are dominant on the ISS in terms of viable and total bacterial community composition. The results obtained will facilitate future studies to determine how stable the ISS environment is over time. The present results also demonstrate the value of measuring viable cell diversity and population size at any sampling site. This information can be used to identify sites that can be targeted for more stringent cleaning. Finally, the results will allow comparisons with other built sites and facilitate future improvements on the ISS that will ensure astronaut health.
Newton, Joshua D; Klein, Ruth; Bauman, Adrian; Newton, Fiona J; Mahal, Ajay; Gilbert, Kara; Piterman, Leon; Ewing, Michael T; Donovan, Robert J; Smith, Ben J
2015-04-18
Physical activity is associated with a host of health benefits, yet many individuals do not perform sufficient physical activity to realise these benefits. One approach to rectifying this situation is through modifying the built environment to make it more conducive to physical activity, such as by building walking tracks or recreational physical activity facilities. Often, however, modifications to the built environment are not connected to efforts aimed at encouraging their use. The purpose of the Monitoring and Observing the Value of Exercise (MOVE) study is to evaluate the effectiveness of two interventions designed to encourage the ongoing use of a new, multi-purpose, community-based physical activity facility. A two-year, randomised controlled trial with yearly survey points (baseline, 12 months follow-up, 24 months follow-up) will be conducted among 1,300 physically inactive adult participants aged 18-70 years. Participants will be randomly assigned to one of three groups: control, intervention 1 (attendance incentives), or intervention 2 (attendance incentives and tailored support following a model based on customer relationship management). Primary outcome measures will include facility usage, physical activity participation, mental and physical wellbeing, community connectedness, social capital, friendship, and social support. Secondary outcome measures will include stages of change for facility usage and social cognitive decision-making variables. This study will assess whether customer relationship management systems, a tool commonly used in commercial marketing settings, can encourage the ongoing use of a physical activity facility. Findings may also indicate the population segments among which the use of such systems are most effective, as well as their cost-effectiveness. Australian New Zealand Clinical Trials Registry: ACTRN12615000012572 (registered 9 January 2015).
Personal, neighbourhood and urban factors associated with obesity in the United States.
Joshu, C E; Boehmer, T K; Brownson, R C; Ewing, R
2008-03-01
Growing evidence suggests the built environment impacts obesity within urban areas; however, little research has investigated these relationships across levels of urbanisation in diverse and representative populations. This study aimed to determine whether personal and neighbourhood barriers differ by the level of urbanisation and the relative importance of personal barriers, neighbourhood barriers and land-use development patterns measured by a county-level sprawl index. Population-based, cross-sectional telephone survey data were collected on 1818 United States adults of diverse ethnicity and income level. Primary analyses were stratified by the level of urbanisation at the county level (large metropolitan, small metropolitan, non-metro, rural). Associations between obesity and neighbourhood and personal barriers were estimated with logistic regression, controlling for demographic variables. Within metropolitan areas, the association between body mass index (BMI) and county-level sprawl was estimated using hierarchical linear modelling, controlling for individual-level neighbourhood and personal barriers and demographic variables and then assessing cross-level interaction. The prevalence of neighbourhood, but not personal, barriers differed widely across levels of urbanisation. Specific neighbourhood (eg traffic, unattended dogs) and personal (eg time, injury) barriers differentially correlated with obesity across strata. The impact of sprawl on BMI (B = -0.005) was consistent with previous findings; standardised coefficients indicate that personal (beta = 0.10) and neighbourhood (beta = 0.05) barriers had a stronger association than sprawl (beta = -0.02). Furthermore, the effect of sprawl on BMI increased by -0.006 with each additional personal barrier. Future intervention planning and policy development should consider that personal barriers and built environment characteristics may interact with each other and influence obesity differently across urbanisation levels.
DOT National Transportation Integrated Search
2001-01-01
In recent years interest has grown in Smart Growth as a mechanism for improving environmental quality. In Our Built and Natural Environments, the U.S. Environmental Protection Agency (EPA) summarizes technical research on the relationship between the...
Walk around the Block Curriculum.
ERIC Educational Resources Information Center
Center for Understanding the Built Environment, Prairie Village, KS.
This curriculum packet contains two teacher-developed lesson plans for upper elementary students focusing on the built environment. The first lesson plan, "The Built Environment--An Integrating Theme" (Liesa Schroeder), offers suggestions for developing a walking tour around the school neighborhood, a historic area, or a city square. It…
Cosco, Nilda G; Moore, Robin C; Smith, William R
2014-01-01
To evaluate the effectiveness of Preventing Obesity by Design (POD), a childcare center outdoor renovation intervention. Pre-post intervention evaluation. North Carolina licensed childcare centers (N = 27). Preschool children. Outdoor renovation, teacher training. Behavior mapping, Preschool Outdoor Environment Measurement Scale (POEMS), center director interview. Descriptive statistics, ordinary least squares and logistic regressions calculated to assess levels of association between environmental change, children's physical activity (PA), social behaviors, and environmental quality. Qualitative interview data analyzed to help understand intervention impact. Behavior mapping showed that site layout attributes, such as the form (i.e., "single loop" and "double loop") of pathways (functioning as circulation routes and wheeled toy settings), are associated with higher levels of PA. Teacher interaction was associated with decreased children's PA. Absence of teacher or lack of child/child interaction was associated with increased PA. POEMS assessment of environmental quality was higher after renovation. POEMS domains (Physical Space and Teacher/Caregiver Roles) were positively associated with PA. After renovation, 68% of center directors reported positive changes in children's behavior and 40% mentioned edible plant installations as greatest success. Built environment renovation of childcare center outdoors, including looped pathways installation, coupled with teacher training, may support increased PA. Renovation, including food gardens, may be a key to success for preschool health promotion and support change in childcare policy.
Interventional radiology virtual simulator for liver biopsy.
Villard, P F; Vidal, F P; ap Cenydd, L; Holbrey, R; Pisharody, S; Johnson, S; Bulpitt, A; John, N W; Bello, F; Gould, D
2014-03-01
Training in Interventional Radiology currently uses the apprenticeship model, where clinical and technical skills of invasive procedures are learnt during practice in patients. This apprenticeship training method is increasingly limited by regulatory restrictions on working hours, concerns over patient risk through trainees' inexperience and the variable exposure to case mix and emergencies during training. To address this, we have developed a computer-based simulation of visceral needle puncture procedures. A real-time framework has been built that includes: segmentation, physically based modelling, haptics rendering, pseudo-ultrasound generation and the concept of a physical mannequin. It is the result of a close collaboration between different universities, involving computer scientists, clinicians, clinical engineers and occupational psychologists. The technical implementation of the framework is a robust and real-time simulation environment combining a physical platform and an immersive computerized virtual environment. The face, content and construct validation have been previously assessed, showing the reliability and effectiveness of this framework, as well as its potential for teaching visceral needle puncture. A simulator for ultrasound-guided liver biopsy has been developed. It includes functionalities and metrics extracted from cognitive task analysis. This framework can be useful during training, particularly given the known difficulties in gaining significant practice of core skills in patients.
Cunningham, Charles E; Kostrzewa, Linda; Rimas, Heather; Chen, Yvonne; Deal, Ken; Blatz, Susan; Bowman, Alida; Buchanan, Don H; Calvert, Randy; Jennings, Barbara
2013-01-01
Patients value health service teams that function effectively. Organizational justice is linked to the performance, health, and emotional adjustment of the members of these teams. We used a discrete-choice conjoint experiment to study the organizational justice improvement preferences of pediatric health service providers. Using themes from a focus group with 22 staff, we composed 14 four-level organizational justice improvement attributes. A sample of 652 staff (76 % return) completed 30 choice tasks, each presenting three hospitals defined by experimentally varying the attribute levels. Latent class analysis yielded three segments. Procedural justice attributes were more important to the Decision Sensitive segment, 50.6 % of the sample. They preferred to contribute to and understand how all decisions were made and expected management to act promptly on more staff suggestions. Interactional justice attributes were more important to the Conduct Sensitive segment (38.5 %). A universal code of respectful conduct, consequences encouraging respectful interaction, and management's response when staff disagreed with them were more important to this segment. Distributive justice attributes were more important to the Benefit Sensitive segment, 10.9 % of the sample. Simulations predicted that, while Decision Sensitive (74.9 %) participants preferred procedural justice improvements, Conduct (74.6 %) and Benefit Sensitive (50.3 %) participants preferred interactional justice improvements. Overall, 97.4 % of participants would prefer an approach combining procedural and interactional justice improvements. Efforts to create the health service environments that patients value need to be comprehensive enough to address the preferences of segments of staff who are sensitive to different dimensions of organizational justice.
Investigating the use of hair to assess polybrominated diphenyl ether exposure retrospectively.
Carnevale, Amanda; Aleksa, Katarina; Goodyer, Cynthia G; Koren, Gideon
2014-04-01
Polybrominated diphenyl ethers (PBDEs) are chemicals that are added to a variety of consumer products as flame-retardants and have been classified as emerging endocrine disruptors. They are persistent and have been detected in humans. Previous studies have suggested that hair is a suitable matrix for examining human exposure to organic pollutants such as PBDEs. It is believed that the majority of exposure is from our indoor environment. The aim of this study was to investigate the changes in PBDE patterns and levels along the hair shaft, by using segmental analysis to retrospectively assess long-term exposure over a 1-year period. Questionnaires and hair samples from 65 women were collected at the Hospital for Sick Children, in Toronto, as part of a larger study. To assess long-term stability, hair samples were separated into 4- and 3-cm segments representing a 1-year period. Hair segments were analyzed for levels of 8 PBDE congeners, BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209 on gas chromatography-mass spectrometry (MS). A Friedman test was used to detect the differences in exposure among segments, and factors such as dietary habits, hair care routine, and site of residence were investigated to determine if they might affect hair levels. A significant increase (P < 0.0001) in total PBDEs was seen among segments moving from proximal (root end) to distal along the hair shaft (median in pg/mg): first (33.3), second (43.0), third (61.6), and fourth (75.5) segments. Significantly lower levels of PBDEs were observed in artificially colored hair samples (P = 0.032), and a significant increase in PBDE levels was observed in women who consumed meat on a daily basis as opposed to weekly consumption (P = 0.040). The increase in PBDEs along the hair shaft suggests that hair PBDEs may be influenced by diet and artificial coloring. More work is needed to validate the use of PBDEs in hair as a biomarker of long-term exposure.
Transmission of Airborne Bacteria across Built Environments and Its Measurement Standards: A Review.
Fujiyoshi, So; Tanaka, Daisuke; Maruyama, Fumito
2017-01-01
Human health is influenced by various factors including microorganisms present in built environments where people spend most of their lives (approximately 90%). It is therefore necessary to monitor and control indoor airborne microbes for occupational safety and public health. Most studies concerning airborne microorganisms have focused on fungi, with scant data available concerning bacteria. The present review considers papers published from 2010 to 2017 approximately and factors affecting properties of indoor airborne bacteria (communities and concentration) with respect to temporal perspective and to multiscale interaction viewpoint. From a temporal perspective, bacterial concentrations in built environments change depending on numbers of human occupancy, while properties of bacterial communities tend to remain stable. Similarly, the bacteria found in social and community spaces such as offices, classrooms and hospitals are mainly associated with human occupancy. Other major sources of indoor airborne bacteria are (i) outdoor environments, and (ii) the building materials themselves. Indoor bacterial communities and concentrations are varied with varying interferences by outdoor environment. Airborne bacteria from the outdoor environment enter an indoor space through open doors and windows, while indoor bacteria are simultaneously released to the outer environment. Outdoor bacterial communities and their concentrations are also affected by geographical factors such as types of land use and their spatial distribution. The bacteria found in built environments therefore originate from any of the natural and man-made surroundings around humans. Therefore, to better understand the factors influencing bacterial concentrations and communities in built environments, we should study all the environments that humans contact as a single ecosystem. In this review, we propose the establishment of a standard procedure for assessing properties of indoor airborne bacteria using four factors: temperature, relative humidity (RH), air exchange rate, and occupant density, as a minimum requirement. We also summarize the relevant legislation by country. Choice of factors to measure remain controversial are discussed.
Transmission of Airborne Bacteria across Built Environments and Its Measurement Standards: A Review
Fujiyoshi, So; Tanaka, Daisuke; Maruyama, Fumito
2017-01-01
Human health is influenced by various factors including microorganisms present in built environments where people spend most of their lives (approximately 90%). It is therefore necessary to monitor and control indoor airborne microbes for occupational safety and public health. Most studies concerning airborne microorganisms have focused on fungi, with scant data available concerning bacteria. The present review considers papers published from 2010 to 2017 approximately and factors affecting properties of indoor airborne bacteria (communities and concentration) with respect to temporal perspective and to multiscale interaction viewpoint. From a temporal perspective, bacterial concentrations in built environments change depending on numbers of human occupancy, while properties of bacterial communities tend to remain stable. Similarly, the bacteria found in social and community spaces such as offices, classrooms and hospitals are mainly associated with human occupancy. Other major sources of indoor airborne bacteria are (i) outdoor environments, and (ii) the building materials themselves. Indoor bacterial communities and concentrations are varied with varying interferences by outdoor environment. Airborne bacteria from the outdoor environment enter an indoor space through open doors and windows, while indoor bacteria are simultaneously released to the outer environment. Outdoor bacterial communities and their concentrations are also affected by geographical factors such as types of land use and their spatial distribution. The bacteria found in built environments therefore originate from any of the natural and man-made surroundings around humans. Therefore, to better understand the factors influencing bacterial concentrations and communities in built environments, we should study all the environments that humans contact as a single ecosystem. In this review, we propose the establishment of a standard procedure for assessing properties of indoor airborne bacteria using four factors: temperature, relative humidity (RH), air exchange rate, and occupant density, as a minimum requirement. We also summarize the relevant legislation by country. Choice of factors to measure remain controversial are discussed. PMID:29238327
Valson, Joanna Sara; Kutty, V Raman
2018-02-05
Non-communicable diseases are on the rise globally. Risk factors of non-communicable diseases continue to be a growing concern in both developed and developing countries. With significant rise in population and establishment of buildings, rapid changes have taken place in the built environment. Relationship between health and place, particularly with non-communicable diseases has been established in previous literature. This systematic review assesses the current evidence on influence of gender in the relationship between built environment and non-communicable diseases. A systematic literature search using PubMed was done to identify all studies that reported relationship between gender and built environment. All titles and abstracts were scrutinised to include only articles based on risk factors, prevention, treatment and outcome of non-communicable diseases. The Gender Analysis Matrix developed by the World Health Organization was used to describe the findings of gender differences. Sex differences, biological susceptibility, gender norms/ values, roles and activities related to gender and access to/control over resources were themes for the differences in the relationship. A total of 15 out of 214 articles met the inclusion criteria. Majority of the studies were on risk factors of non-communicable diseases, particularly cardiovascular diseases. Gender differences in physical access to recreational facilities, neighbourhood perceptions of safety and walkability have been documented. Men and women showed differential preferences to walking, engaging in physical activity and in perceiving safety of the neighbourhood. Girls and boys showed differences in play activities at school and in their own neighbourhood environment. Safety from crime and safety from traffic were also perceived important to engage in physical activity. Gender norms and gender roles and activities have shown basis for the differences in the prevalence of non-communicable diseases. Sparse evidence was found on how built environment affects health seeking behaviour, preventive options or experience with health providers. Though yet unexplored in the developing or low/middle income countries, there seems to be a major role in the gendered perception of how men and women are affected by noncommunicable diseases. Large gaps still exist in the research evidence on gender-based differences in non-communicable diseases and built environment relationship. Future research directions could bring out underpinnings of how perceived and objective built environment could largely affect the health behaviour of men and women across the globe.
NASA Technical Reports Server (NTRS)
Skillen, Michael D.; Crossley, William A.
2008-01-01
This report presents an approach for sizing of a morphing aircraft based upon a multi-level design optimization approach. For this effort, a morphing wing is one whose planform can make significant shape changes in flight - increasing wing area by 50% or more from the lowest possible area, changing sweep 30 or more, and/or increasing aspect ratio by as much as 200% from the lowest possible value. The top-level optimization problem seeks to minimize the gross weight of the aircraft by determining a set of "baseline" variables - these are common aircraft sizing variables, along with a set of "morphing limit" variables - these describe the maximum shape change for a particular morphing strategy. The sub-level optimization problems represent each segment in the morphing aircraft's design mission; here, each sub-level optimizer minimizes fuel consumed during each mission segment by changing the wing planform within the bounds set by the baseline and morphing limit variables from the top-level problem.
Design in the Classroom: Exploring the Built Environment.
ERIC Educational Resources Information Center
Maine Arts Commission, Augusta.
Design and the built environment are subjects of concern to Maine communities. State mandated town planning, new school construction, and the Department of Transportation plans to rebuild roads and bridges elicit public discussion. The study of design encourages elementary students to enter this public forum as informed citizens. The study of…
Urban form-the structure of the built environment-can influence physical activity, yet little is known about how walkable design differs according to neighborhood sociodemographic composition. We studied how walkable urban form varies by neighborhood sociodemographic composition,...
[Interpreting Historic Sites & the Built Environment.
ERIC Educational Resources Information Center
Yellis, Ken, Ed.
1985-01-01
This issue focuses on the interpretation of built environments, from Washington Irving's 19th century home in Tarrytown, New York, to structures in contemporary Chicago. Barbara Carson, Margaret Piatt, and Renee Friedman discuss the interpretation of interior and exterior spaces and explain how to teach history with objects instead of teaching the…
Smith, Jordan W.
2015-01-01
Immersive virtual environment (IVE) technology offers a wide range of potential benefits to research focused on understanding how individuals perceive and respond to built and natural environments. In an effort to broaden awareness and use of IVE technology in perception, preference and behavior research, this review paper describes how IVE technology can be used to complement more traditional methods commonly applied in public health research. The paper also describes a relatively simple workflow for creating and displaying 360° virtual environments of built and natural settings and presents two freely-available and customizable applications that scientists from a variety of disciplines, including public health, can use to advance their research into human preferences, perceptions and behaviors related to built and natural settings. PMID:26378565
Smith, Jordan W
2015-09-11
Immersive virtual environment (IVE) technology offers a wide range of potential benefits to research focused on understanding how individuals perceive and respond to built and natural environments. In an effort to broaden awareness and use of IVE technology in perception, preference and behavior research, this review paper describes how IVE technology can be used to complement more traditional methods commonly applied in public health research. The paper also describes a relatively simple workflow for creating and displaying 360° virtual environments of built and natural settings and presents two freely-available and customizable applications that scientists from a variety of disciplines, including public health, can use to advance their research into human preferences, perceptions and behaviors related to built and natural settings.
A deep learning model integrating FCNNs and CRFs for brain tumor segmentation.
Zhao, Xiaomei; Wu, Yihong; Song, Guidong; Li, Zhenye; Zhang, Yazhuo; Fan, Yong
2018-01-01
Accurate and reliable brain tumor segmentation is a critical component in cancer diagnosis, treatment planning, and treatment outcome evaluation. Build upon successful deep learning techniques, a novel brain tumor segmentation method is developed by integrating fully convolutional neural networks (FCNNs) and Conditional Random Fields (CRFs) in a unified framework to obtain segmentation results with appearance and spatial consistency. We train a deep learning based segmentation model using 2D image patches and image slices in following steps: 1) training FCNNs using image patches; 2) training CRFs as Recurrent Neural Networks (CRF-RNN) using image slices with parameters of FCNNs fixed; and 3) fine-tuning the FCNNs and the CRF-RNN using image slices. Particularly, we train 3 segmentation models using 2D image patches and slices obtained in axial, coronal and sagittal views respectively, and combine them to segment brain tumors using a voting based fusion strategy. Our method could segment brain images slice-by-slice, much faster than those based on image patches. We have evaluated our method based on imaging data provided by the Multimodal Brain Tumor Image Segmentation Challenge (BRATS) 2013, BRATS 2015 and BRATS 2016. The experimental results have demonstrated that our method could build a segmentation model with Flair, T1c, and T2 scans and achieve competitive performance as those built with Flair, T1, T1c, and T2 scans. Copyright © 2017 Elsevier B.V. All rights reserved.
Homology Model of the GABAA Receptor Examined Using Brownian Dynamics
O'Mara, Megan; Cromer, Brett; Parker, Michael; Chung, Shin-Ho
2005-01-01
We have developed a homology model of the GABAA receptor, using the subunit combination of α1β2γ2, the most prevalent type in the mammalian brain. The model is produced in two parts: the membrane-embedded channel domain and the extracellular N-terminal domain. The pentameric transmembrane domain model is built by modeling each subunit by homology with the equivalent subunit of the heteropentameric acetylcholine receptor transmembrane domain. This segment is then joined with the extracellular domain built by homology with the acetylcholine binding protein. The all-atom model forms a wide extracellular vestibule that is connected to an oval chamber near the external surface of the membrane. A narrow, cylindrical transmembrane channel links the outer segment of the pore to a shallow intracellular vestibule. The physiological properties of the model so constructed are examined using electrostatic calculations and Brownian dynamics simulations. A deep energy well of ∼80 kT accommodates three Cl− ions in the narrow transmembrane channel and seven Cl− ions in the external vestibule. Inward permeation takes place when one of the ions queued in the external vestibule enters the narrow segment and ejects the innermost ion. The model, when incorporated into Brownian dynamics, reproduces key experimental features, such as the single-channel current-voltage-concentration profiles. Finally, we simulate the γ2 K289M epilepsy inducing mutation and examine Cl− ion permeation through the mutant receptor. PMID:15749776
Rutt, Candace D; Coleman, Karen J
2005-06-01
The current study examined the relationships among built environment, physical activity, and body mass index (BMI) in a primarily Hispanic border community in El Paso, TX. Data from a 2001 community-wide health survey were matched to environmental data using geocoding techniques in ARC VIEW software. A total of 996 adults were surveyed by phone and 452 were successfully geocoded. The sample was 71% female, 79% Hispanic, 42 +/- 17 years old, moderately acculturated, and had socioeconomic status (SES) levels of semi-skilled workers. Increasing BMI was related to less moderate intensity physical activity (P = 0.05), higher SES (P = 0.0003), worse overall health (P = 0.0004), and living in areas with greater land-use mix (less residential; P = 0.03). The relationship between overall health and BMI was in part mediated by higher numbers of barriers to physical activity in those with poor health, which lead to a decrease in moderate physical activity. These variables explained 20% of the variance in BMI. This is one of the first studies to find a positive relationship between land-use mix and BMI in a predominantly Hispanic, low-income community. The positive association between BMI and land-use mix may be due to the inclusion of individual SES as a controlling variable in the analyses, suggesting that SES may have a differential effect on how the built environment influences BMI in low- to moderate-income minority communities.
The effects of views of nature on autonomic control.
Gladwell, V F; Brown, D K; Barton, J L; Tarvainen, M P; Kuoppa, P; Pretty, J; Suddaby, J M; Sandercock, G R H
2012-09-01
Previously studies have shown that nature improves mood and self-esteem and reduces blood pressure. Walking within a natural environment has been suggested to alter autonomic nervous system control, but the mechanisms are not fully understood. Heart rate variability (HRV) is a non-invasive method of assessing autonomic control and can give an insight into vagal modulation. Our hypothesis was that viewing nature alone within a controlled laboratory environment would induce higher levels of HRV as compared to built scenes. Heart rate (HR) and blood pressure (BP) were measured during viewing different scenes in a controlled environment. HRV was used to investigate alterations in autonomic activity, specifically parasympathetic activity. Each participant lay in the semi-supine position in a laboratory while we recorded 5 min (n = 29) of ECG, BP and respiration as they viewed two collections of slides (one containing nature views and the other built scenes). During viewing of nature, markers of parasympathetic activity were increased in both studies. Root mean squared of successive differences increased 4.2 ± 7.7 ms (t = 2.9, p = 0.008) and natural logarithm of high frequency increased 0.19 ± 0.36 ms(2) Hz(-1) (t = 2.9, p = 0.007) as compared to built scenes. Mean HR and BP were not significantly altered. This study provides evidence that autonomic control of the heart is altered by the simple act of just viewing natural scenes with an increase in vagal activity.
Geographical Variations in the Environmental Determinants of Physical Inactivity among U.S. Adults.
An, Ruopeng; Li, Xinye; Jiang, Ning
2017-10-31
Physical inactivity is a major modifiable risk factor for morbidity, disability and premature mortality worldwide. This study assessed the geographical variations in the impact of environmental quality on physical inactivity among U.S. adults. Data on county-level prevalence of leisure-time physical inactivity came from the Behavioral Risk Factor Surveillance System. County environment was measured by the Environmental Quality Index (EQI), a comprehensive index of environmental conditions that affect human health. The overall EQI consists of five subdomains-air, water, land, social, and built environment. Geographically weighted regressions (GWRs) were performed to estimate and map county-specific impact of overall EQI and its five subdomains on physical inactivity prevalence. The prevalence of leisure-time physical inactivity among U.S. counties was 25% in 2005. On average, one standard deviation decrease in the overall EQI was associated with an increase in county-level prevalence of leisure-time physical inactivity by nearly 1%. However, substantial geographical variations in the estimated environmental determinants of physical inactivity were present. The estimated changes of county-level prevalence of leisure-time physical inactivity resulted from one standard deviation decrease of the overall EQI ranged from an increase of over 3% to a decrease of nearly 2% across U.S. counties. Analogous, the estimated changes of county-level prevalence of leisure-time physical inactivity resulted from one standard deviation decrease of the EQI air, water, land, social, and built environment subdomains ranged from an increase of 2.6%, 1.5%, 2.9%, 3.3%, and 1.7% to a decrease of 2.9%, 1.4%, 2.4%, 2.4%, and 0.8% across U.S. counties, respectively. Given the substantial heterogeneities in the environmental determinants of physical inactivity, locally customized physical activity interventions are warranted to address the most concerning area-specific environmental issue.
Investigation of Primary Mirror Segment's Residual Errors for the Thirty Meter Telescope
NASA Technical Reports Server (NTRS)
Seo, Byoung-Joon; Nissly, Carl; Angeli, George; MacMynowski, Doug; Sigrist, Norbert; Troy, Mitchell; Williams, Eric
2009-01-01
The primary mirror segment aberrations after shape corrections with warping harness have been identified as the single largest error term in the Thirty Meter Telescope (TMT) image quality error budget. In order to better understand the likely errors and how they will impact the telescope performance we have performed detailed simulations. We first generated unwarped primary mirror segment surface shapes that met TMT specifications. Then we used the predicted warping harness influence functions and a Shack-Hartmann wavefront sensor model to determine estimates for the 492 corrected segment surfaces that make up the TMT primary mirror. Surface and control parameters, as well as the number of subapertures were varied to explore the parameter space. The corrected segment shapes were then passed to an optical TMT model built using the Jet Propulsion Laboratory (JPL) developed Modeling and Analysis for Controlled Optical Systems (MACOS) ray-trace simulator. The generated exit pupil wavefront error maps provided RMS wavefront error and image-plane characteristics like the Normalized Point Source Sensitivity (PSSN). The results have been used to optimize the segment shape correction and wavefront sensor designs as well as provide input to the TMT systems engineering error budgets.
Construction of Continental Crust at the Central American and Philippines Arc Systems
NASA Astrophysics Data System (ADS)
Whattam, S. A.; Stern, R. J.
2016-12-01
Whether or not magmatic arcs evolve compositionally with time and the processes responsible remain controversial. Resolution of this question requires reconstructing arc geochemical evolution at the level of discrete arc systems, as has been done for IBM, Central America, and the Greater Antilles. Emphasis should be on arcs built on oceanic crust because interaction with continental crust complicates interpretations. The Philippines are a particularly attractive target because this may be the best example where proto-continental crust has been generated and processed in Cretaceous and younger time. Here, we show how this question could be addressed for the Philippines using the well-studied Central American Volcanic Arc System (CAVAS) as an example. For the CAVAS, we avoided the northern arc segment because these are (Guatemala) or maybe (El Salvador) sections built on continental crust. Geochemical and isotopic data were compiled for 1031 samples of lavas and intrusive rocks from the 1100 km-long segment built on thickened, initially plume-derived oceanic crust over its 75 million year lifespan (Panama, Costa Rica, Nicaragua) . The most striking observation is the overall evolution of the CAVAS to more incompatible element enriched and ultimately continental-like compositions with time. Models entailing progressive arc magmatic enrichment are generally supported by the CAVAS record. Progressive enrichment of the oceanic CAVAS with time reflects changes in mantle wedge composition and decreased melting due to arc crust thickening, which was kick-started by the involvement of enriched plume mantle. Progressive crustal thickening and associated changes in the sub-arc thermal regime resulted in decreasing degrees of partial melting over time, which allowed for progressive enrichment of the CAVAS and ultimately the production of continental-like crust in Panama and Costa Rica by 16-10 Ma. Our similar study of the Philippine Arc system is in its infancy but earlier studies have shown that older magmatic rocks are tholeiitic and MORB-like whereas younger ones are invariably calc-alkaline and arc-like. Results of the Philippines Arc study will be compared with the CAVAS and other magmatic arc systems comprised of continental crust.
Lai, Po-Hsin; Sorice, Michael G; Nepal, Sanjay K; Cheng, Chia-Kuen
2009-06-01
High demand for outdoor recreation and increasing diversity in outdoor recreation participants have imposed a great challenge on the National Park Service (NPS), which is tasked with the mission to provide open access for quality outdoor recreation and maintain the ecological integrity of the park system. In addition to management practices of education and restrictions, building a sense of natural resource stewardship among visitors may also facilitate the NPS ability to react to this challenge. The purpose of our study is to suggest a segmentation approach that is built on the social marketing framework and aimed at influencing visitor behaviors to support conservation. Attitude toward natural resource management, an indicator of natural resource stewardship, is used as the basis for segmenting park visitors. This segmentation approach is examined based on a survey of 987 visitors to the Padre Island National Seashore (PAIS) in Texas in 2003. Results of the K-means cluster analysis identify three visitor segments: Conservation-Oriented, Development-Oriented, and Status Quo visitors. This segmentation solution is verified using respondents' socio-demographic backgrounds, use patterns, experience preferences, and attitudes toward a proposed regulation. Suggestions are provided to better target the three visitor segments and facilitate a sense of natural resource stewardship among them.
Subject-specific body segment parameter estimation using 3D photogrammetry with multiple cameras
Morris, Mark; Sellers, William I.
2015-01-01
Inertial properties of body segments, such as mass, centre of mass or moments of inertia, are important parameters when studying movements of the human body. However, these quantities are not directly measurable. Current approaches include using regression models which have limited accuracy: geometric models with lengthy measuring procedures or acquiring and post-processing MRI scans of participants. We propose a geometric methodology based on 3D photogrammetry using multiple cameras to provide subject-specific body segment parameters while minimizing the interaction time with the participants. A low-cost body scanner was built using multiple cameras and 3D point cloud data generated using structure from motion photogrammetric reconstruction algorithms. The point cloud was manually separated into body segments, and convex hulling applied to each segment to produce the required geometric outlines. The accuracy of the method can be adjusted by choosing the number of subdivisions of the body segments. The body segment parameters of six participants (four male and two female) are presented using the proposed method. The multi-camera photogrammetric approach is expected to be particularly suited for studies including populations for which regression models are not available in literature and where other geometric techniques or MRI scanning are not applicable due to time or ethical constraints. PMID:25780778
Subject-specific body segment parameter estimation using 3D photogrammetry with multiple cameras.
Peyer, Kathrin E; Morris, Mark; Sellers, William I
2015-01-01
Inertial properties of body segments, such as mass, centre of mass or moments of inertia, are important parameters when studying movements of the human body. However, these quantities are not directly measurable. Current approaches include using regression models which have limited accuracy: geometric models with lengthy measuring procedures or acquiring and post-processing MRI scans of participants. We propose a geometric methodology based on 3D photogrammetry using multiple cameras to provide subject-specific body segment parameters while minimizing the interaction time with the participants. A low-cost body scanner was built using multiple cameras and 3D point cloud data generated using structure from motion photogrammetric reconstruction algorithms. The point cloud was manually separated into body segments, and convex hulling applied to each segment to produce the required geometric outlines. The accuracy of the method can be adjusted by choosing the number of subdivisions of the body segments. The body segment parameters of six participants (four male and two female) are presented using the proposed method. The multi-camera photogrammetric approach is expected to be particularly suited for studies including populations for which regression models are not available in literature and where other geometric techniques or MRI scanning are not applicable due to time or ethical constraints.
Automated construction of arterial and venous trees in retinal images
Hu, Qiao; Abràmoff, Michael D.; Garvin, Mona K.
2015-01-01
Abstract. While many approaches exist to segment retinal vessels in fundus photographs, only a limited number focus on the construction and disambiguation of arterial and venous trees. Previous approaches are local and/or greedy in nature, making them susceptible to errors or limiting their applicability to large vessels. We propose a more global framework to generate arteriovenous trees in retinal images, given a vessel segmentation. In particular, our approach consists of three stages. The first stage is to generate an overconnected vessel network, named the vessel potential connectivity map (VPCM), consisting of vessel segments and the potential connectivity between them. The second stage is to disambiguate the VPCM into multiple anatomical trees, using a graph-based metaheuristic algorithm. The third stage is to classify these trees into arterial or venous (A/V) trees. We evaluated our approach with a ground truth built based on a public database, showing a pixel-wise classification accuracy of 88.15% using a manual vessel segmentation as input, and 86.11% using an automatic vessel segmentation as input. PMID:26636114
Classification with an edge: Improving semantic image segmentation with boundary detection
NASA Astrophysics Data System (ADS)
Marmanis, D.; Schindler, K.; Wegner, J. D.; Galliani, S.; Datcu, M.; Stilla, U.
2018-01-01
We present an end-to-end trainable deep convolutional neural network (DCNN) for semantic segmentation with built-in awareness of semantically meaningful boundaries. Semantic segmentation is a fundamental remote sensing task, and most state-of-the-art methods rely on DCNNs as their workhorse. A major reason for their success is that deep networks learn to accumulate contextual information over very large receptive fields. However, this success comes at a cost, since the associated loss of effective spatial resolution washes out high-frequency details and leads to blurry object boundaries. Here, we propose to counter this effect by combining semantic segmentation with semantically informed edge detection, thus making class boundaries explicit in the model. First, we construct a comparatively simple, memory-efficient model by adding boundary detection to the SEGNET encoder-decoder architecture. Second, we also include boundary detection in FCN-type models and set up a high-end classifier ensemble. We show that boundary detection significantly improves semantic segmentation with CNNs in an end-to-end training scheme. Our best model achieves >90% overall accuracy on the ISPRS Vaihingen benchmark.
Katapally, Tarun Reddy; Rainham, Daniel; Muhajarine, Nazeem
2016-01-01
With emerging evidence indicating that independent of physical activity, sedentary behaviour (SB) can be detrimental to health, researchers are increasingly aiming to understand the influence of multiple contexts such as urban design and built environment on SB. However, weather variation, a factor that continuously interacts with all other environmental variables, has been consistently underexplored. This study investigated the influence of diverse environmental exposures (including weather variation, urban design and built environment) on SB in children. This cross-sectional observational study is part of an active living research initiative set in the Canadian prairie city of Saskatoon. Saskatoon's neighbourhoods were classified based on urban street design into grid-pattern, fractured grid-pattern and curvilinear types of neighbourhoods. Diverse environmental exposures were measured including, neighbourhood built environment, and neighbourhood and household socioeconomic environment. Actical accelerometers were deployed between April and June 2010 (spring-summer) to derive SB of 331 10-14 year old children in 25 one week cycles. Each cycle of accelerometry was conducted on a different cohort of children within the total sample. Accelerometer data were matched with localized weather patterns derived from Environment Canada weather data. Multilevel modeling using Hierarchical Linear and Non-linear Modeling software was conducted by factoring in weather variation to depict the influence of diverse environmental exposures on SB. Both weather variation and urban design played a significant role in SB. After factoring in weather variation, it was observed that children living in grid-pattern neighbourhoods closer to the city centre (with higher diversity of destinations) were less likely to be sedentary. This study demonstrates a methodology that could be replicated to integrate geography-specific weather patterns with existing cross-sectional accelerometry data to understand the influence of urban design and built environment on SB in children.
NASA Astrophysics Data System (ADS)
Ghigo, Mauro; Proserpio, Laura; Basso, Stefano; Citterio, Oberto; Civitani, Marta M.; Pareschi, Giovanni; Salmaso, Bianca; Sironi, Giorgia; Spiga, Daniele; Tagliaferri, Giampiero; Vecchi, Gabriele; Zambra, Alberto; Parodi, Giancarlo; Martelli, Francesco; Gallieni, Daniele; Tintori, Matteo; Bavdaz, Marcos; Wille, Eric; Ferrario, Ivan; Burwitz, Vadim
2013-09-01
The Astronomical Observatory of Brera (INAF-OAB, Italy), with the financing support of the European Space Agency (ESA), has concluded a study regarding a glass shaping technology for the production of grazing incidence segmented x-ray optics. This technique uses a hot slumping phase, in which pressure is actively applied on thin glass foils being shaped, to form a cylindrical approximation of Wolter I x-ray segments, and a subsequent cold slumping phase, in which the final Wolter I profile is then freeze into the glass segments during their integration in elemental X-ray Optical Units. The final goal of this study was the manufacturing of a prototype containing a number of slumped pair plates (meaning parabola and hyperbola couples) having representative dimensions to be tested both in UV light and in x-rays at the Panter facility (Germany). In this paper, the INAF-OAB slumping technique, comprising a shaping step and an integration step is described, together with the results obtained on the manufactured prototype modules: the first prototype was aimed to test the ad-hoc designed and built semi-automatic Integration MAchine (IMA) and debug its control software. The most complete module comprises 40 slumped segments of Schott D263 glass type of dimension 200 mm x 200 mm and thickness of 0.4 mm, slumped on Zerodur K20 mould and stacked together through glued BK7 glass structural ribs to form the first entire x-ray optical module ever built totally composed by glass. A last prototype was aimed at demonstrate the use of Schott glass AF32 type instead of D263. In particular, a new hot slumping experimental set-up is described whose advantage is to permit a better contact between mould and glass during the shaping process. The integration procedure of the slumped segments into the elemental module is also reviewed.
Wu, Yu-Tzu; Nash, Paul; Barnes, Linda E; Minett, Thais; Matthews, Fiona E; Jones, Andy; Brayne, Carol
2014-10-22
An association between depressive symptoms and features of built environment has been reported in the literature. A remaining research challenge is the development of methods to efficiently capture pertinent environmental features in relevant study settings. Visual streetscape images have been used to replace traditional physical audits and directly observe the built environment of communities. The aim of this work is to examine the inter-method reliability of the two audit methods for assessing community environments with a specific focus on physical features related to mental health. Forty-eight postcodes in urban and rural areas of Cambridgeshire, England were randomly selected from an alphabetical list of streets hosted on a UK property website. The assessment was conducted in July and August 2012 by both physical and visual image audits based on the items in Residential Environment Assessment Tool (REAT), an observational instrument targeting the micro-scale environmental features related to mental health in UK postcodes. The assessor used the images of Google Street View and virtually "walked through" the streets to conduct the property and street level assessments. Gwet's AC1 coefficients and Bland-Altman plots were used to compare the concordance of two audits. The results of conducting the REAT by visual image audits generally correspond to direct observations. More variations were found in property level items regarding physical incivilities, with broad limits of agreement which importantly lead to most of the variation in the overall REAT score. Postcodes in urban areas had lower consistency between the two methods than rural areas. Google Street View has the potential to assess environmental features related to mental health with fair reliability and provide a less resource intense method of assessing community environments than physical audits.
Knuiman, Matthew W; Christian, Hayley E; Divitini, Mark L; Foster, Sarah A; Bull, Fiona C; Badland, Hannah M; Giles-Corti, Billie
2014-09-01
The purpose of the present analysis was to use longitudinal data collected over 7 years (from 4 surveys) in the Residential Environments (RESIDE) Study (Perth, Australia, 2003-2012) to more carefully examine the relationship of neighborhood walkability and destination accessibility with walking for transportation that has been seen in many cross-sectional studies. We compared effect estimates from 3 types of logistic regression models: 2 that utilize all available data (a population marginal model and a subject-level mixed model) and a third subject-level conditional model that exclusively uses within-person longitudinal evidence. The results support the evidence that neighborhood walkability (especially land-use mix and street connectivity), local access to public transit stops, and variety in the types of local destinations are important determinants of walking for transportation. The similarity of subject-level effect estimates from logistic mixed models and those from conditional logistic models indicates that there is little or no bias from uncontrolled time-constant residential preference (self-selection) factors; however, confounding by uncontrolled time-varying factors, such as health status, remains a possibility. These findings provide policy makers and urban planners with further evidence that certain features of the built environment may be important in the design of neighborhoods to increase walking for transportation and meet the health needs of residents. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Seismic response of precast segmental bridge superstructures.
DOT National Transportation Integrated Search
2006-12-01
Precast segmental construction of bridges can accelerate construction and minimize the cost of bridges in highly congested urban environments and environmentally sensitive regions. Despite their proven benefits, the use of precast segmental bridges i...
Sidawi, Bhzad; Al-Hariri, Mohamed Taha Ali
2012-01-01
At present, Diabetes mellitus is considered as one of the main threats to the human health in the 21st century. It may lead to severe conditions such as blindness, end-stage of renal disease, limb amputation and a variety of debilitating neuropathies. Previous researches indicated that diabetes is caused by a complex interaction of patient’s genetics, life-style and environmental factors. They also highlighted that providing quality and healthy built environment to citizens including diabetic patients would prevent poor and unhealthy condition. The Kingdom of Saudi Arabia (KSA) is one of top ten countries in the prevalence of diabetes. Little researches though were conducted in KSA in regards to the effect of environmental conditions of the built environment. In 2011, the present researchers have carried out a pilot survey on a number of diabetic patients to find out the possible impact of built environment settings on the patient’s lifestyle. The research explored whether diabetic patients use smart tools in their daily life to overcome the daily life’s difficulties and perform their life as normal as possible. The results showed a close link between a poor home and environmental settings, the patient’s lifestyle, and the patient’s health status. It also highlighted the absence of smart tools and systems use. The paper argues that certain changes to the built environment must be done and to provide a healthy and safe environment for diabetic patients. This would help these patients to abandon their bad habits and adopt healthier lifestyle. PMID:22980349
Sidawi, Bhzad; Al-Hariri, Mohamed Taha Ali
2012-06-13
At present, Diabetes mellitus is considered as one of the main threats to the human health in the 21st century. It may lead to severe conditions such as blindness, end-stage of renal disease, limb amputation and a variety of debilitating neuropathies. Previous researches indicated that diabetes is caused by a complex interaction of patient's genetics, life-style and environmental factors. They also highlighted that providing quality and healthy built environment to citizens including diabetic patients would prevent poor and unhealthy condition. The Kingdom of Saudi Arabia (KSA) is one of top ten countries in the prevalence of diabetes. Little researches though were conducted in KSA in regards to the effect of environmental conditions of the built environment. In 2011, the present researchers have carried out a pilot survey on a number of diabetic patients to find out the possible impact of built environment settings on the patient's lifestyle. The research explored whether diabetic patients use smart tools in their daily life to overcome the daily life's difficulties and perform their life as normal as possible. The results showed a close link between a poor home and environmental settings, the patient's lifestyle, and the patient's health status. It also highlighted the absence of smart tools and systems use. The paper argues that certain changes to the built environment must be done and to provide a healthy and safe environment for diabetic patients. This would help these patients to abandon their bad habits and adopt healthier lifestyle.
Constellation's First Flight Test: Ares I-X
NASA Technical Reports Server (NTRS)
Davis, Stephan R.; Askins, Bruce R.
2010-01-01
On October 28, 2009, NASA launched Ares I-X, the first flight test of the Constellation Program that will send human beings to the Moon and beyond. This successful test is the culmination of a three-and-a-half-year, multi-center effort to design, build, and fly the first demonstration vehicle of the Ares I crew launch vehicle, the successor vehicle to the Space Shuttle. The suborbital mission was designed to evaluate the atmospheric flight characteristics of a vehicle dynamically similar to Ares I; perform a first stage separation and evaluate its effects; characterize and control roll torque; stack, fly, and recover a solid-motor first stage testing the Ares I parachutes; characterize ground, flight, and reentry environments; and develop and execute new ground hardware and procedures. Built from existing flight and new simulator hardware, Ares I-X integrated a Shuttle-heritage four-segment solid rocket booster for first stage propulsion, a spacer segment to simulate a five-segment booster, Peacekeeper axial engines for roll control, and Atlas V avionics, as well as simulators for the upper stage, crew module, and launch abort system. The mission leveraged existing logistical and ground support equipment while also developing new ones to accommodate the first in-line rocket for flying astronauts since the Saturn IB last flew from Kennedy Space Center (KSC) in 1975. This paper will describe the development and integration of the various vehicle and ground elements, from conception to stacking in KSC s Vehicle Assembly Building; hardware performance prior to, during, and after the launch; and preliminary lessons and data gathered from the flight. While the Constellation Program is currently under review, Ares I-X has and will continue to provide vital lessons for NASA personnel in taking a vehicle concept from design to flight.
Implementation of a General Real-Time Visual Anomaly Detection System Via Soft Computing
NASA Technical Reports Server (NTRS)
Dominguez, Jesus A.; Klinko, Steve; Ferrell, Bob; Steinrock, Todd (Technical Monitor)
2001-01-01
The intelligent visual system detects anomalies or defects in real time under normal lighting operating conditions. The application is basically a learning machine that integrates fuzzy logic (FL), artificial neural network (ANN), and generic algorithm (GA) schemes to process the image, run the learning process, and finally detect the anomalies or defects. The system acquires the image, performs segmentation to separate the object being tested from the background, preprocesses the image using fuzzy reasoning, performs the final segmentation using fuzzy reasoning techniques to retrieve regions with potential anomalies or defects, and finally retrieves them using a learning model built via ANN and GA techniques. FL provides a powerful framework for knowledge representation and overcomes uncertainty and vagueness typically found in image analysis. ANN provides learning capabilities, and GA leads to robust learning results. An application prototype currently runs on a regular PC under Windows NT, and preliminary work has been performed to build an embedded version with multiple image processors. The application prototype is being tested at the Kennedy Space Center (KSC), Florida, to visually detect anomalies along slide basket cables utilized by the astronauts to evacuate the NASA Shuttle launch pad in an emergency. The potential applications of this anomaly detection system in an open environment are quite wide. Another current, potentially viable application at NASA is in detecting anomalies of the NASA Space Shuttle Orbiter's radiator panels.
Near roadway air pollution across a spatially extensive road and cycling network.
Farrell, William; Weichenthal, Scott; Goldberg, Mark; Valois, Marie-France; Shekarrizfard, Maryam; Hatzopoulou, Marianne
2016-05-01
This study investigates the variability in near-road concentrations of ultra-fine particles (UFP). Our results are based on a mobile data collection campaign conducted in 2012 in Montreal, Canada using instrumented bicycles and covering approximately 475 km of unique roadways. The spatial extent of the data collected included a diverse array of roads and land use patterns. Average concentrations of UFP per roadway segment varied greatly across the study area (1411-192,340 particles/cm(3)) as well as across the different visits to the same segment. Mixed effects linear regression models were estimated for UFP (R(2) = 43.80%), incorporating a wide range of predictors including land-use, built environment, road characteristics, and meteorology. Temperature and wind speed had a large negative effect on near-road concentrations of UFP. Both the day of the week and time of day had a significant effect with Tuesdays and afternoon periods positively associated with UFP. Since UFP are largely associated with traffic emissions and considering the wide spatial extent of our data collection campaign, it was impossible to collect traffic volume data. For this purpose, we used simulated data for traffic volumes and speeds across the region and observed a positive effect for volumes and negative effect for speed. Finally, proximity to truck routes was also associated with higher UFP concentrations. Copyright © 2016 Elsevier Ltd. All rights reserved.
Liu, Fang; Zhou, Zhaoye; Jang, Hyungseok; Samsonov, Alexey; Zhao, Gengyan; Kijowski, Richard
2018-04-01
To describe and evaluate a new fully automated musculoskeletal tissue segmentation method using deep convolutional neural network (CNN) and three-dimensional (3D) simplex deformable modeling to improve the accuracy and efficiency of cartilage and bone segmentation within the knee joint. A fully automated segmentation pipeline was built by combining a semantic segmentation CNN and 3D simplex deformable modeling. A CNN technique called SegNet was applied as the core of the segmentation method to perform high resolution pixel-wise multi-class tissue classification. The 3D simplex deformable modeling refined the output from SegNet to preserve the overall shape and maintain a desirable smooth surface for musculoskeletal structure. The fully automated segmentation method was tested using a publicly available knee image data set to compare with currently used state-of-the-art segmentation methods. The fully automated method was also evaluated on two different data sets, which include morphological and quantitative MR images with different tissue contrasts. The proposed fully automated segmentation method provided good segmentation performance with segmentation accuracy superior to most of state-of-the-art methods in the publicly available knee image data set. The method also demonstrated versatile segmentation performance on both morphological and quantitative musculoskeletal MR images with different tissue contrasts and spatial resolutions. The study demonstrates that the combined CNN and 3D deformable modeling approach is useful for performing rapid and accurate cartilage and bone segmentation within the knee joint. The CNN has promising potential applications in musculoskeletal imaging. Magn Reson Med 79:2379-2391, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.
Hystad, Perry; Davies, Hugh W; Frank, Lawrence; Van Loon, Josh; Gehring, Ulrike; Tamburic, Lillian; Brauer, Michael
2014-10-01
Half the world's population lives in urban areas. It is therefore important to identify characteristics of the built environment that are beneficial to human health. Urban greenness has been associated with improvements in a diverse range of health conditions, including birth outcomes; however, few studies have attempted to distinguish potential effects of greenness from those of other spatially correlated exposures related to the built environment. We aimed to investigate associations between residential greenness and birth outcomes and evaluate the influence of spatially correlated built environment factors on these associations. We examined associations between residential greenness [measured using satellite-derived Normalized Difference Vegetation Index (NDVI) within 100 m of study participants' homes] and birth outcomes in a cohort of 64,705 singleton births (from 1999-2002) in Vancouver, British Columbia, Canada. We also evaluated associations after adjusting for spatially correlated built environmental factors that may influence birth outcomes, including exposure to air pollution and noise, neighborhood walkability, and distance to the nearest park. An interquartile increase in greenness (0.1 in residential NDVI) was associated with higher term birth weight (20.6 g; 95% CI: 16.5, 24.7) and decreases in the likelihood of small for gestational age, very preterm (< 30 weeks), and moderately preterm (30-36 weeks) birth. Associations were robust to adjustment for air pollution and noise exposures, neighborhood walkability, and park proximity. Increased residential greenness was associated with beneficial birth outcomes in this population-based cohort. These associations did not change after adjusting for other spatially correlated built environment factors, suggesting that alternative pathways (e.g., psychosocial and psychological mechanisms) may underlie associations between residential greenness and birth outcomes.
Comparative study on different types of segmented micro deformable mirrors
NASA Astrophysics Data System (ADS)
Qiao, Dayong; Yuan, Weizheng; Li, Kaicheng; Li, Xiaoying; Rao, Fubo
2006-02-01
In an adaptive-optical (AO) system, the wavefront of optical beam can be corrected with deformable mirror (DM). Based on MicroElectroMechanical System (MEMS) technology, segmented micro deformable mirrors can be built with denser actuator spacing than continuous face-sheet designs and have been widely researched. But the influence of the segment structure has not been thoroughly discussed until now. In this paper, the design, performance and fabrication of several micromachined, segmented deformable mirror for AO were investigated. The wavefront distorted by atmospheric turbulence was simulated in the frame of Kolmogorov turbulence model. Position function was used to describe the surfaces of the micro deformable mirrors in working state. The performances of deformable mirrors featuring square, brick, hexagonal and ring segment structures were evaluated in criteria of phase fitting error, the Strehl ratio after wavefront correction and the design considerations. Then the micro fabrication process and mask layout were designed and the fabrication of micro deformable mirrors was implemented. The results show that the micro deformable mirror with ring segments performs the best, but it is very difficult in terms of layout design. The micro deformable mirrors with square and brick segments are easy to design, but their performances are not good. The micro deformable mirror with hexagonal segments has not only good performance in terms of phase fitting error, the Strehl ratio and actuation voltage, but also no overwhelming difficulty in layout design.
Nicholls, Daniel; Kidd, Kevin; Threader, Jennifer; Hungerford, Catherine
2015-08-01
This study investigated changes in the 'atmosphere' of an acute adult mental health setting following relocation to a new purpose-built facility. The Ward Atmosphere Scale (WAS) was designed and validated for specific use in hospital-based psychiatric facilities, and measures several dimensions of an environment. In this study, the WAS was administered to consumers and staff at periods before and also after their relocation to a new purpose-built acute adult mental health facility. There were significant improvements in the physical atmosphere of the new facility, when compared with the old facility. In terms of ward atmosphere, however, improvements were seen to occur in only a small number of measures and there were minor differences between consumers' and staff perspectives on some indicators. Interestingly, it was found that consumers noted less 'staff control' in the new setting, raising the question of the differences in understanding of control. For staff only, there was a perception of greater levels of consumer 'involvement' in the new facility. Despite the minor differences in perception, the study does confirm that architecture is an important influence on the 'atmosphere' of a health facility, for both staff and consumers. © 2015 Australian College of Mental Health Nurses Inc.
Automated side-chain model building and sequence assignment by template matching.
Terwilliger, Thomas C
2003-01-01
An algorithm is described for automated building of side chains in an electron-density map once a main-chain model is built and for alignment of the protein sequence to the map. The procedure is based on a comparison of electron density at the expected side-chain positions with electron-density templates. The templates are constructed from average amino-acid side-chain densities in 574 refined protein structures. For each contiguous segment of main chain, a matrix with entries corresponding to an estimate of the probability that each of the 20 amino acids is located at each position of the main-chain model is obtained. The probability that this segment corresponds to each possible alignment with the sequence of the protein is estimated using a Bayesian approach and high-confidence matches are kept. Once side-chain identities are determined, the most probable rotamer for each side chain is built into the model. The automated procedure has been implemented in the RESOLVE software. Combined with automated main-chain model building, the procedure produces a preliminary model suitable for refinement and extension by an experienced crystallographer.
An Interactive Multimedia Learning Environment for VLSI Built with COSMOS
ERIC Educational Resources Information Center
Angelides, Marios C.; Agius, Harry W.
2002-01-01
This paper presents Bigger Bits, an interactive multimedia learning environment that teaches students about VLSI within the context of computer electronics. The system was built with COSMOS (Content Oriented semantic Modelling Overlay Scheme), which is a modelling scheme that we developed for enabling the semantic content of multimedia to be used…
Does Built Environment Matter to Early Adolescents' Physical Activity?
ERIC Educational Resources Information Center
Lin, Jen-Jia; Ting, Tzu-Cheng
2014-01-01
This study examined the relationship of built environments to physical activity among adolescents aged 12 to 14 years old. The study sample included 269 junior high school students studying in Nangang District, Taipei, Taiwan. Sample physical activity data were obtained by surveying adolescents using a self-administered short version of the…
A Design Model: The Autism Spectrum Disorder Classroom Design Kit
ERIC Educational Resources Information Center
McAllister, Keith; Maguire, Barry
2012-01-01
Architects and designers have a responsibility to provide an inclusive built environment. However, for those with a diagnosis of autism spectrum disorder (ASD), the built environment can be a frightening and confusing place, difficult to negotiate and tolerate. The challenge of integrating more fully into society is denied by an alienating built…
The school environment and sugar-sweetened beverage consumption among Guatemalan adolescents.
Godin, Katelyn M; Chacón, Violeta; Barnoya, Joaquin; Leatherdale, Scott T
2017-11-01
The current study sought to examine Guatemalan adolescents' consumption of sugar-sweetened beverages (SSB), identify which individual-level characteristics are associated with SSB consumption and describe school characteristics that may influence students' SSB consumption. Within this observational pilot study, a questionnaire was used to assess students' consumption of three varieties of SSB (soft drinks, energy drinks, sweetened coffees/teas), as well as a variety of sociodemographic and behavioural characteristics. We collected built environment data to examine aspects of the school food environment. We developed Poisson regression models for each SSB variety and used descriptive analyses to characterize the sample. Guatemala City, Guatemala. Guatemalan adolescents (n 1042) from four (two public, two private) secondary schools. Built environment data revealed that students from the two public schools lacked access to water fountains/coolers. The SSB industry had a presence in the schools through advertisements, sponsored food kiosks and products available for sale. Common correlates of SSB consumption included school type, sedentary behaviour, frequency of purchasing lunch in the cafeteria, and frequency of purchasing snacks from vending machines in school and off school property. Guatemalan adolescents frequently consume SSB, which may be encouraged by aspects of the school environment. Schools represent a viable setting for equitable population health interventions designed to reduce SSB consumption, including increasing access to clean drinking-water, reducing access to SSB, restricting SSB marketing and greater enforcement of existing food policies.
Segmenting Broadcast News Audiences in the New Media Environment.
ERIC Educational Resources Information Center
Wicks, Robert H.
1989-01-01
Examines the "benefit segmentation model," a marketing strategy for local news media which is capable of sorting consumers into discrete segments interested in similar salient product attributes or benefits. Concludes that benefit segmentation may provide a means by which news programmers may respond to their audience. (RS)
Zhao, Pengxiang; Zhou, Suhong
2018-01-01
Traditionally, static units of analysis such as administrative units are used when studying obesity. However, using these fixed contextual units ignores environmental influences experienced by individuals in areas beyond their residential neighborhood and may render the results unreliable. This problem has been articulated as the uncertain geographic context problem (UGCoP). This study investigates the UGCoP through exploring the relationships between the built environment and obesity based on individuals’ activity space. First, a survey was conducted to collect individuals’ daily activity and weight information in Guangzhou in January 2016. Then, the data were used to calculate and compare the values of several built environment variables based on seven activity space delineations, including home buffers, workplace buffers (WPB), fitness place buffers (FPB), the standard deviational ellipse at two standard deviations (SDE2), the weighted standard deviational ellipse at two standard deviations (WSDE2), the minimum convex polygon (MCP), and road network buffers (RNB). Lastly, we conducted comparative analysis and regression analysis based on different activity space measures. The results indicate that significant differences exist between variables obtained with different activity space delineations. Further, regression analyses show that the activity space delineations used in the analysis have a significant influence on the results concerning the relationships between the built environment and obesity. The study sheds light on the UGCoP in analyzing the relationships between obesity and the built environment. PMID:29439392
Built environment assessment: Multidisciplinary perspectives.
Glanz, Karen; Handy, Susan L; Henderson, Kathryn E; Slater, Sandy J; Davis, Erica L; Powell, Lisa M
2016-12-01
As obesity has become increasingly widespread, scientists seek better ways to assess and modify built and social environments to positively impact health. The applicable methods and concepts draw on multiple disciplines and require collaboration and cross-learning. This paper describes the results of an expert team׳s analysis of how key disciplinary perspectives contribute to environmental context-based assessment related to obesity, identifies gaps, and suggests opportunities to encourage effective advances in this arena. A team of experts representing diverse disciplines convened in 2013 to discuss the contributions of their respective disciplines to assessing built environments relevant to obesity prevention. The disciplines include urban planning, public health nutrition, exercise science, physical activity research, public health and epidemiology, behavioral and social sciences, and economics. Each expert identified key concepts and measures from their discipline, and applications to built environment assessment and action. A selective review of published literature and internet-based information was conducted in 2013 and 2014. The key points that are highlighted in this article were identified in 2014-2015 through discussion, debate and consensus-building among the team of experts. Results focus on the various disciplines׳ perspectives and tools, recommendations, progress and gaps. There has been significant progress in collaboration across key disciplines that contribute to studies of built environments and obesity, but important gaps remain. Using lessons from interprofessional education and team science, along with appreciation of and attention to other disciplines׳ contributions, can promote more effective cross-disciplinary collaboration in obesity prevention.
Achieving built-environment and active living goals through Music City Moves.
Omishakin, Adetokunbo A; Carlat, Jennifer L; Hornsby, Shannon; Buck, Tracy
2009-12-01
Nashville, Tennessee, formed Music City Moves (MCM), an interdisciplinary, countywide partnership to implement its vision for the community: a metropolitan region where routine physical activity is a fundamental part of daily life for all residents. Music City Moves' main focus was the pursuit of changes in community planning policies to help shape Nashville's built environment and facilitate walking and bicycling. To complement this focus, MCM developed a suite of health programs to support physical activity in high-risk populations and a countywide promotional campaign designed to increase awareness and get people active through event participation. Nashville made considerable strides in improving policies and regulations related to building and site design to improve the built environment for pedestrians and cyclists, including passage of (1) specific plan zoning; (2) revised subdivision regulations that introduced a "walkable subdivision" option for developers; and (3) a community-character manual that will guide future land-use planning. Programs and promotions have increased awareness and participation, and the Tour de Nash bike/walk event showcases yearly changes in the built environment. Political leadership has been critical to MCM's success. Leadership of the partnership by the planning department facilitated regulatory changes in planning policies. Music City Moves has accelerated Nashville's movement to improve the built environment and encourage active living. The beneficial impact of policy changes will continue to be manifested in coming years; however, ongoing political support and education of stakeholders in the planning process will be necessary to ensure that planning policies are fully implemented.
Alexander, Nathan S; Palczewska, Grazyna; Palczewski, Krzysztof
2015-08-01
Automated image segmentation is a critical step toward achieving a quantitative evaluation of disease states with imaging techniques. Two-photon fluorescence microscopy (TPM) has been employed to visualize the retinal pigmented epithelium (RPE) and provide images indicating the health of the retina. However, segmentation of RPE cells within TPM images is difficult due to small differences in fluorescence intensity between cell borders and cell bodies. Here we present a semi-automated method for segmenting RPE cells that relies upon multiple weak features that differentiate cell borders from the remaining image. These features were scored by a search optimization procedure that built up the cell border in segments around a nucleus of interest. With six images used as a test, our method correctly identified cell borders for 69% of nuclei on average. Performance was strongly dependent upon increasing retinosome content in the RPE. TPM image analysis has the potential of providing improved early quantitative assessments of diseases affecting the RPE.
ERIC Educational Resources Information Center
Boarnet, Marlon G.; Forsyth, Ann; Day, Kristen; Oakes, J. Michael
2011-01-01
The Irvine Minnesota Inventory (IMI) was designed to measure environmental features that may be associated with physical activity and particularly walking. This study assesses how well the IMI predicts physical activity and walking behavior and develops shortened, validated audit tools. A version of the IMI was used in the Twin Cities Walking…
Foster, Sarah; Hooper, Paula; Knuiman, Matthew; Christian, Hayley; Bull, Fiona; Giles-Corti, Billie
2016-02-16
Numerous cross-sectional studies have investigated the premise that the perception of crime will cause residents to constrain their walking; however the findings to date are inconclusive. In contrast, few longitudinal or prospective studies have examined the impact of crime-related safety on residents walking behaviours. This study used longitudinal data to test whether there is a causal relationship between crime-related safety and walking in the local neighbourhood. Participants in the RESIDential Environments Project (RESIDE) in Perth, Australia, completed a questionnaire before moving to their new neighbourhood (n = 1813) and again approximately one (n = 1467), three (n = 1230) and seven years (n = 531) after relocating. Self-report measures included neighbourhood perceptions (modified NEWS items) and walking inside the neighbourhood (min/week). Objective built environmental measures were generated for each participant's 1600 m neighbourhood at each time-point, and the count of crimes reported to police were generated at the suburb-level for the first three time-points only. The impact of crime-related safety on walking was examined in SAS using the Proc Mixed procedure (marginal repeated measures model with unrestricted variance pattern). Initial models controlled for demographics, time and self-selection, and subsequent models progressively adjusted for other built and social environment factors based on a social ecological model. For every increase of one level on a five-point Likert scale in perceived safety from crime, total walking within the local neighbourhood increased by 18.0 min/week (p = 0.000). This relationship attenuated to an increase of 10.5 min/week after accounting for other built and social environment factors, but remained significant (p = 0.008). Further analyses examined transport and recreational walking separately. In the fully adjusted models, each increase in safety from crime was associated with a 7.0 min/week increase in recreational walking (p = 0.009), however findings for transport walking were non-significant. All associations between suburb-level crime and walking were non-significant. This study provides longitudinal evidence of a potential causal relationship between residents' perceptions of safety from crime and recreational walking. Safety perceptions appeared to influence recreational walking, rather than transport-related walking. Given the popularity of recreational walking and the need to increase levels of physical activity, community social and physical environmental interventions that foster residents' feelings of safety are likely to increase recreational walking and produce public health gains.
Goldin-Meadow, Susan; Namboodiripad, Savithry; Mylander, Carolyn; Özyürek, Aslı; Sancar, Burcu
2013-01-01
Deaf children whose hearing losses prevent them from accessing spoken language and whose hearing parents have not exposed them to sign language develop gesture systems, called homesigns, that have many of the properties of natural language—the so-called resilient properties of language. We explored the resilience of structure built around the predicate—in particular, how manner and path are mapped onto the verb—in homesign systems developed by deaf children in Turkey and the United States. We also asked whether the Turkish homesigners exhibit sentence-level structures previously identified as resilient in American and Chinese homesigners. We found that the Turkish and American deaf children used not only the same production probability and ordering patterns to indicate who does what to whom, but also the same segmentation and conflation patterns to package manner and path. The gestures that the hearing parents produced did not, for the most part, display the patterns found in the children’s gestures. Although co-speech gesture may provide the building blocks for homesign, it does not provide the blueprint for these resilient properties of language. PMID:25663828
NASA Astrophysics Data System (ADS)
Lu, S. L.; Tang, H. P.; Ning, Y. P.; Liu, N.; StJohn, D. H.; Qian, M.
2015-09-01
An array of eight long Ti-6Al-4V rods (diameter: 12 mm; height: 300 mm) have been additively manufactured, vertically and perpendicular to the powder bed, by selective electron beam melting (SEBM). The purpose was to identify and understand the challenges of fabricating Ti-6Al-4V samples or parts from a deep powder bed (more than 200-mm deep) by SEBM and the necessity of applying post heat treatment. The resulting microstructure and mechanical properties of these Ti-6Al-4V rods were characterized along their building ( i.e., axial) direction by dividing each rod into three segments (top, middle, and bottom), both before ( i.e., as-built) and after hot isostatic pressing (HIP). The as-built microstructure of each rod was inhomogeneous; it was coarsest in the top segment, which showed a near equilibrium α- β lamellar structure, and finest in the bottom segment, which featured a non-equilibrium mixed structure. The tensile properties varied along the rod axis, especially the ductility, but all tensile properties met the requirements specified by ASTM F3001-14. HIP increased the relative density from 99.03 pct of the theoretical density (TD) to 99.90 pct TD and homogenized the microstructure thereby leading to highly consistent tensile properties along the rod axis. The temperature of the stainless steel substrate used in the powder bed was monitored. The as-built inhomogeneous microstructure is attributed to the temperature gradient in the deep powder bed. Post heat treatment is thus necessary for Ti-6Al-4V samples or parts manufactured from a deep powder bed by SEBM. This differs from the additive manufacturing of small samples or parts from a shallow powder bed (less than 100-mm deep) by SEBM.
Immersive Environment Technologies for Mars Exploration
NASA Technical Reports Server (NTRS)
Wright, John R.; Hartman, Frank
2000-01-01
JPL's charter includes the unmanned exploration of the Solar System. One of the tools for exploring other planets is the rover as exemplified by Sojourner on the Mars Pathfinder mission. The light speed turnaround time between Earth and the outer planets precludes the use of teleoperated rovers so autonomous operations are built in to the current and upcoming generation devices. As the level of autonomy increases, the mode of operations shifts from low-level specification of activities to a higher-level specification of goals. To support this higher-level activity, it is necessary to provide the operator with an effective understanding of the in-situ environment and also the tools needed to specify the higher-level goals. Immersive environments provide the needed sense of presence to achieve this goal. Use of immersive environments at JPL has two main thrusts that will be discussed in this talk. One is the generation of 3D models of the in-situ environment, in particular the merging of models from different sensors, different modes (orbital, descent, and lander), and even different missions. The other is the use of various tools to visualize the environment within which the rover will be operating to maximize the understanding by the operator. A suite of tools is under development which provide an integrated view into the environment while providing a variety of modes of visualization. This allows the operator to smoothly switch from one mode to another depending on the information and presentation desired.
Heinemann, Allen W; Lai, Jin-Shei; Wong, Alex; Dashner, Jessica; Magasi, Susan; Hahn, Elizabeth A; Carlozzi, Noelle E; Tulsky, David S; Jerousek, Sara; Semik, Patrick; Miskovic, Ana; Gray, David B
2016-11-01
To develop a measure of natural environment and human-made change features (Chapter 2 of the international classification of functioning, disability, and health) and evaluate the influence of perceived barriers on health-related quality of life. A sample of 570 adults with stroke, spinal cord injury, and traumatic brain injury residing in community settings reported their functioning in home, outdoor, and community settings (mean age = 47.0 years, SD = 16.1). They rated 18 items with a 5-point rating scale to describe the influence of barriers to moving around, seeing objects, hearing sounds, hearing conversations, feeling safe, and regulating temperature and indicated whether any difficulties were due to environmental features. We used Rasch analysis to identify misfitting items and evaluate differential item functioning (DIF) across impairment groups. We computed correlations between barriers and patient-reported outcomes measurement information system (PROMIS) social domain measures and community participation indicators (CPI) measures. The 18 items demonstrated person reliability of .70, discriminating nearly three levels of barriers. All items fit the Rasch model; impairment-related DIF was negligible. Ceiling effects were negligible, but 25 % of the respondents were at the floor, indicating that they did not experience barriers that they attributed to the built and natural environment. As anticipated, barriers correlated moderately with PROMIS and CPI variables, suggesting that although this new item bank measures a construct that is related to participation and health-related quality of life, it also captures something unique. Known-groups validity was supported by wheelchair users reporting a higher level of barriers than did ambulatory respondents. Preliminary evidence supports the reliability and validity of this new measure of barriers to the built and natural environment. This measure allows investigators and clinicians to measure perceptions of the natural environment and human-made changes, providing information that can guide interventions to reduce barriers. Moderate relationships between barriers and PROMIS and CPI variables provide support for the measurement and theory of environmental influences on social health and participation.
Monitoring the expansion of built-up areas in Seberang Perai region, Penang State, Malaysia
NASA Astrophysics Data System (ADS)
Samat, N.
2014-02-01
Rapid urbanization has caused land use transformation and encroachment of built environment into arable agriculture land. Uncontrolled expansion could bring negative impacts to society, space and the environment. Therefore, information on expansion and future spatial pattern of built-up areas would be useful for planners and decision makers in formulating policies towards managing and planning for sustainable urban development. This study demonstrates the usage of Geographic Information System in monitoring the expansion of built-up area in Seberang Perai region, Penang State, Malaysia. Built-up area has increased by approximately 20% between 1990 and 2001 and further increased by 12% between 2001 and 2007. New development is expected to continue encroach into existing open space and agriculture area since those are the only available land in this study area. The information on statistics of the expansion of built-up area and future spatial pattern of urban expansion were useful in planning and managing urban spatial growth.
Oyeyemi, Adewale L; Kasoma, Sandra S; Onywera, Vincent O; Assah, Felix; Adedoyin, Rufus A; Conway, Terry L; Moss, Sarah J; Ocansey, Reginald; Kolbe-Alexander, Tracy L; Akinroye, Kingsley K; Prista, Antonio; Larouche, Richard; Gavand, Kavita A; Cain, Kelli L; Lambert, Estelle V; Aryeetey, Richmond; Bartels, Clare; Tremblay, Mark S; Sallis, James F
2016-03-08
Built environment and policy interventions are effective strategies for controlling the growing worldwide deaths from physical inactivity-related non-communicable diseases. To improve built environment research and develop African specific evidence, it is important to first tailor built environment measures to African contexts and assess their psychometric properties across African countries. This study reports on the adaptation and test-retest reliability of the Neighborhood Environment Walkability Scale in seven sub-Saharan African countries (NEWS-Africa). The original NEWS comprising 8 subscales measuring reported physical and social attributes of neighborhood environments was systematically adapted for Africa through extensive input from physical activity and public health researchers, built environment professionals, and residents in seven African countries: Cameroon, Ghana, Kenya, Mozambique, Nigeria, South Africa and Uganda. Cognitive testing of NEWS-Africa was conducted among diverse residents (N = 109, 50 youth [12 - 17 years] and 59 adults [22 - 67 years], 69 % from low socioeconomic status [SES] neighborhoods). NEWS-Africa was translated into local languages and evaluated for 2-week test-retest reliability in adult participants (N = 301; female = 50.2 %; age = 32.3 ± 12.9 years) purposively recruited from neighborhoods varying in walkability (high and low walkable) and SES (high and low income) and from villages in six of seven participating countries. The original 67 NEWS items was expanded to 89 scores (76 individual NEWS items and 13 computed scales). Several modifications were made to individual items, and some new items were added to capture important attributes in the African environment. A new scale on personal safety was created, and the aesthetics scale was enlarged to reflect African specific characteristics. Over 95 % of all NEWS-Africa scores (items plus computed scales) demonstrated evidence of "excellent" (ICCs > .75 %) or "good" (ICCs = 0.60 to 0.74) reliability. Seven (53.8 %) of the 13 computed NEWS scales demonstrated "excellent" agreement and the other six had "good" agreement. No items or scales demonstrated "poor" reliability (ICCs < .40). The systematic adaptation and initial psychometric evaluation of NEWS-Africa indicates the instrument is feasible and reliable for use with adults of diverse demographic characteristics in Africa. The measure is likely to be useful for research, surveillance of built environment conditions for planning purposes, and to evaluate physical activity and policy interventions in Africa.
Costs and Risks of Continuous Purges for Instruments
NASA Technical Reports Server (NTRS)
Secunda, M.; De Garcia, K. Montt
2018-01-01
As instruments are built, tested, and launched, they are exposed to environments that have various levels of cleanliness. Often, Scientists and Contamination Control Engineers specify a purge to mitigate the instrument's exposure to a non-clean environment, protect sensitive optics from a specific threat, such as water, or as insurance against things going wrong in a clean environment. The cost of the purge, in effort, dollars and risk, is often understated when the requirements are being established, and the need for purge is not clearly justifiable. This paper will more clearly define some of the costs and risks associated with the continuous purging of instruments during the course of building, testing and launching instruments.
NASA Astrophysics Data System (ADS)
Sinner, K.; Teasley, R. L.
2016-12-01
Groundwater models serve as integral tools for understanding flow processes and informing stakeholders and policy makers in management decisions. Historically, these models tended towards a deterministic nature, relying on historical data to predict and inform future decisions based on model outputs. This research works towards developing a stochastic method of modeling recharge inputs from pipe main break predictions in an existing groundwater model, which subsequently generates desired outputs incorporating future uncertainty rather than deterministic data. The case study for this research is the Barton Springs segment of the Edwards Aquifer near Austin, Texas. Researchers and water resource professionals have modeled the Edwards Aquifer for decades due to its high water quality, fragile ecosystem, and stakeholder interest. The original case study and model that this research is built upon was developed as a co-design problem with regional stakeholders and the model outcomes are generated specifically for communication with policy makers and managers. Recently, research in the Barton Springs segment demonstrated a significant contribution of urban, or anthropogenic, recharge to the aquifer, particularly during dry period, using deterministic data sets. Due to social and ecological importance of urban water loss to recharge, this study develops an evaluation method to help predicted pipe breaks and their related recharge contribution within the Barton Springs segment of the Edwards Aquifer. To benefit groundwater management decision processes, the performance measures captured in the model results, such as springflow, head levels, storage, and others, were determined by previous work in elicitation of problem framing to determine stakeholder interests and concerns. The results of the previous deterministic model and the stochastic model are compared to determine gains to stakeholder knowledge through the additional modeling
New geometric design consistency model based on operating speed profiles for road safety evaluation.
Camacho-Torregrosa, Francisco J; Pérez-Zuriaga, Ana M; Campoy-Ungría, J Manuel; García-García, Alfredo
2013-12-01
To assist in the on-going effort to reduce road fatalities as much as possible, this paper presents a new methodology to evaluate road safety in both the design and redesign stages of two-lane rural highways. This methodology is based on the analysis of road geometric design consistency, a value which will be a surrogate measure of the safety level of the two-lane rural road segment. The consistency model presented in this paper is based on the consideration of continuous operating speed profiles. The models used for their construction were obtained by using an innovative GPS-data collection method that is based on continuous operating speed profiles recorded from individual drivers. This new methodology allowed the researchers to observe the actual behavior of drivers and to develop more accurate operating speed models than was previously possible with spot-speed data collection, thereby enabling a more accurate approximation to the real phenomenon and thus a better consistency measurement. Operating speed profiles were built for 33 Spanish two-lane rural road segments, and several consistency measurements based on the global and local operating speed were checked. The final consistency model takes into account not only the global dispersion of the operating speed, but also some indexes that consider both local speed decelerations and speeds over posted speeds as well. For the development of the consistency model, the crash frequency for each study site was considered, which allowed estimating the number of crashes on a road segment by means of the calculation of its geometric design consistency. Consequently, the presented consistency evaluation method is a promising innovative tool that can be used as a surrogate measure to estimate the safety of a road segment. Copyright © 2012 Elsevier Ltd. All rights reserved.
ERIC Educational Resources Information Center
Doolittle, Peter
2010-01-01
Short, cause-and-effect instructional multimedia tutorials that provide learner control of instructional pace (segmentation) and verbal representations of content in a conversational tone (personalization) have been demonstrated to benefit problem solving transfer. How might a more comprehensive multimedia instructional environment focused on…
DOT National Transportation Integrated Search
2015-04-01
This research examined the safety and operational effects of roadway lane width on mid-block segments between : signalized intersections as well as on signalized intersection approaches in the urban environments of Lincoln and Omaha, : Nebraska. In t...
When students can choose easy, medium, or hard homework problems
NASA Astrophysics Data System (ADS)
Teodorescu, Raluca E.; Seaton, Daniel T.; Cardamone, Caroline N.; Rayyan, Saif; Abbott, Jonathan E.; Barrantes, Analia; Pawl, Andrew; Pritchard, David E.
2012-02-01
We investigate student-chosen, multi-level homework in our Integrated Learning Environment for Mechanics [1] built using the LON-CAPA [2] open-source learning system. Multi-level refers to problems categorized as easy, medium, and hard. Problem levels were determined a priori based on the knowledge needed to solve them [3]. We analyze these problems using three measures: time-per-problem, LON-CAPA difficulty, and item difficulty measured by item response theory. Our analysis of student behavior in this environment suggests that time-per-problem is strongly dependent on problem category, unlike either score-based measures. We also found trends in student choice of problems, overall effort, and efficiency across the student population. Allowing students choice in problem solving seems to improve their motivation; 70% of students worked additional problems for which no credit was given.
Effects of Degree of Segmentation and Learner Disposition on Multimedia Learning
ERIC Educational Resources Information Center
Doolittle, Peter E.; Bryant, Lauren H.; Chittum, Jessica R.
2015-01-01
The construction of asynchronous learning environments often involves the creation of self-paced multimedia instructional episodes that provide the learner with control over the pacing of instruction (segmentation); however, does the amount of segmentation impact learning? This study explored the effects of the degree of segmentation on recall and…
Designing with Care. A Guide to Adaptation of the Built Environment for Disabled Persons.
ERIC Educational Resources Information Center
Hanson, Lisa; And Others
Developed as part of the International Year of Disabled Persons, the guide is intended to help planners, architects, and designers to accommodate the built environment of developing regions for disabled persons. Guidelines focus on public building in urban or village settings and emphasize simple solutions to common problems. Following an…