Circular Samples as Objects for Magnetic Resonance Imaging - Mathematical Simulation, Experimental Results

NASA Astrophysics Data System (ADS)

Frollo, Ivan; Krafčík, Andrej; Andris, Peter; Přibil, Jiří; Dermek, Tomáš

2015-12-01

Circular samples are the frequent objects of "in-vitro" investigation using imaging method based on magnetic resonance principles. The goal of our investigation is imaging of thin planar layers without using the slide selection procedure, thus only 2D imaging or imaging of selected layers of samples in circular vessels, eppendorf tubes,.. compulsorily using procedure "slide selection". In spite of that the standard imaging methods was used, some specificity arise when mathematical modeling of these procedure is introduced. In the paper several mathematical models were presented that were compared with real experimental results. Circular magnetic samples were placed into the homogenous magnetic field of a low field imager based on nuclear magnetic resonance. For experimental verification an MRI 0.178 Tesla ESAOTE Opera imager was used.

Selection and Performance in a Gas Utility Company. Final Report.

ERIC Educational Resources Information Center

Joseph, Myron L.

A study of employment procedures at an unnamed gas utility company was made, examining selection procedures, white and blue collar employee performance, promotion rates, and turnover. The data is based on application files, interviews with management personnel, and employee records. The company relied primarily on walk-ins and employee referrals…

US EPA Base Study Standard Operating Procedure for Building Recruiting

EPA Pesticide Factsheets

Building recruiting for the BASE study is defined by a random selection of buildings within cities of population exceeding 100,000 inhabitants and located in selected climatic regions of the United States.

Demonstrating Natural Selection

ERIC Educational Resources Information Center

Hinds, David S.; Amundson, John C.

1975-01-01

Describes laboratory exercises with chickens selecting their food from dyed and natural corn kernels as a method of demonstrating natural selection. The procedure is based on the fact that organisms that blend into their surroundings escape predation. (BR)

Mimic expert judgement through automated procedure for selecting rainfall events responsible for shallow landslide: A statistical approach to validation

NASA Astrophysics Data System (ADS)

Giovanna, Vessia; Luca, Pisano; Carmela, Vennari; Mauro, Rossi; Mario, Parise

2016-01-01

This paper proposes an automated method for the selection of rainfall data (duration, D, and cumulated, E), responsible for shallow landslide initiation. The method mimics an expert person identifying D and E from rainfall records through a manual procedure whose rules are applied according to her/his judgement. The comparison between the two methods is based on 300 D-E pairs drawn from temporal rainfall data series recorded in a 30 days time-lag before the landslide occurrence. Statistical tests, employed on D and E samples considered both paired and independent values to verify whether they belong to the same population, show that the automated procedure is able to replicate the expert pairs drawn by the expert judgment. Furthermore, a criterion based on cumulated distribution functions (CDFs) is proposed to select the most related D-E pairs to the expert one among the 6 drawn from the coded procedure for tracing the empirical rainfall threshold line.

IMBLMS phase B4, additional tasks 5.0. Microbial identification system

NASA Technical Reports Server (NTRS)

1971-01-01

A laboratory study was undertaken to provide simplified procedures leading to the presumptive identification (I/D) of defined microorganisms on-board an orbiting spacecraft. Identifications were to be initiated by nonprofessional bacteriologists, (crew members) on a contingency basis only. Key objectives/constraints for this investigation were as follows:(1) I/D procedures based on limited, defined diagnostic tests, (2) testing oriented about ten selected microorganisms, (3) provide for definitive I/D key and procedures per selected organism, (4) define possible occurrences of false positives for the resulting I/D key by search of the appropriate literature, and (5) evaluation of the I/D key and procedure through a limited field trial on randomly selected subjects using the I/D key.

Comparing preference assessments: selection- versus duration-based preference assessment procedures.

PubMed

Kodak, Tiffany; Fisher, Wayne W; Kelley, Michael E; Kisamore, April

2009-01-01

In the current investigation, the results of a selection- and a duration-based preference assessment procedure were compared. A Multiple Stimulus With Replacement (MSW) preference assessment [Windsor, J., Piché, L. M., & Locke, P. A. (1994). Preference testing: A comparison of two presentation methods. Research in Developmental Disabilities, 15, 439-455] and a variation of a Free-Operant (FO) preference assessment procedure [Roane, H. S., Vollmer, T. R., Ringdahl, J. E., & Marcus, B. A. (1998). Evaluation of a brief stimulus preference assessment. Journal of Applied Behavior Analysis, 31, 605-620] were conducted with four participants. A reinforcer assessment was conducted to determine which preference assessment procedure identified the item that produced the highest rates of responding. The items identified as most highly preferred were different across preference assessment procedures for all participants. Results of the reinforcer assessment showed that the MSW identified the item that functioned as the most effective reinforcer for two participants.

Expertise sensitive item selection.

PubMed

Chow, P; Russell, H; Traub, R E

2000-12-01

In this paper we describe and illustrate a procedure for selecting items from a large pool for a certification test. The proposed procedure, which is intended to improve the alignment of the certification test with on-the-job performance, is based on an expertise sensitive index. This index for an item is the difference between the item's p values for experts and novices. An example is provided of the application of the index for selecting items to be used in certifying bakers.

Investigations into Alternative Desorption Agents for Amidoxime-Based Polymeric Uranium Adsorbents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gill, Gary A.; Kuo, Li-Jung; Strivens, Jonathan E.

2015-06-01

Amidoxime-based polymeric braid adsorbents that can extract uranium (U) from seawater are being developed to provide a sustainable supply of fuel for nuclear reactors. A critical step in the development of the technology is to develop elution procedures to selectively remove U from the adsorbents and to do so in a manner that allows the adsorbent material to be reused. This study investigates use of high concentrations of bicarbonate along with targeted chelating agents as an alternative means to the mild acid elution procedures currently in use for selectively eluting uranium from amidoxime-based polymeric adsorbents.

10 CFR 436.33 - Procedures and methods for contractor selection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... for contractor selection. (a) Competitive selection. Competitive selections based on solicitation of... synopsizes the proposed contract action. (2) Each competitive solicitation— (i) Shall request technical and... from those within the competitive range. (b) Unsolicited proposals. Federal agencies may— (1) Consider...

Facial recognition using multisensor images based on localized kernel eigen spaces.

PubMed

Gundimada, Satyanadh; Asari, Vijayan K

2009-06-01

A feature selection technique along with an information fusion procedure for improving the recognition accuracy of a visual and thermal image-based facial recognition system is presented in this paper. A novel modular kernel eigenspaces approach is developed and implemented on the phase congruency feature maps extracted from the visual and thermal images individually. Smaller sub-regions from a predefined neighborhood within the phase congruency images of the training samples are merged to obtain a large set of features. These features are then projected into higher dimensional spaces using kernel methods. The proposed localized nonlinear feature selection procedure helps to overcome the bottlenecks of illumination variations, partial occlusions, expression variations and variations due to temperature changes that affect the visual and thermal face recognition techniques. AR and Equinox databases are used for experimentation and evaluation of the proposed technique. The proposed feature selection procedure has greatly improved the recognition accuracy for both the visual and thermal images when compared to conventional techniques. Also, a decision level fusion methodology is presented which along with the feature selection procedure has outperformed various other face recognition techniques in terms of recognition accuracy.

Target-matched insertion gain derived from three different hearing aid selection procedures.

PubMed

Punch, J L; Shovels, A H; Dickinson, W W; Calder, J H; Snead, C

1995-11-01

Three hearing aid selection procedures were compared to determine if any one was superior in producing prescribed real-ear insertion gain. For each of three subject groups, 12 in-the-ear style hearing aids with Class D circuitry and similar dispenser controls were ordered from one of three manufacturers. Subject groups were classified based on the type of information included on the hearing aid order form: (1) the subject's audiogram, (2) a three-part matrix specifying the desired maximum output, full-on gain, and frequency response slope of the hearing aid, or (3) the desired 2-cc coupler full-in grain of the hearing aid, based on real-ear coupler difference (RECD) measurements. Following electroacoustic adjustments aimed at approximating a commonly used target insertion gain formula, results revealed no significant differences among any of the three selection procedures with respect to obtaining acceptable insertion gain values.

Selecting Statistical Procedures for Quality Control Planning Based on Risk Management.

PubMed

Yago, Martín; Alcover, Silvia

2016-07-01

According to the traditional approach to statistical QC planning, the performance of QC procedures is assessed in terms of its probability of rejecting an analytical run that contains critical size errors (PEDC). Recently, the maximum expected increase in the number of unacceptable patient results reported during the presence of an undetected out-of-control error condition [Max E(NUF)], has been proposed as an alternative QC performance measure because it is more related to the current introduction of risk management concepts for QC planning in the clinical laboratory. We used a statistical model to investigate the relationship between PEDC and Max E(NUF) for simple QC procedures widely used in clinical laboratories and to construct charts relating Max E(NUF) with the capability of the analytical process that allow for QC planning based on the risk of harm to a patient due to the report of erroneous results. A QC procedure shows nearly the same Max E(NUF) value when used for controlling analytical processes with the same capability, and there is a close relationship between PEDC and Max E(NUF) for simple QC procedures; therefore, the value of PEDC can be estimated from the value of Max E(NUF) and vice versa. QC procedures selected by their high PEDC value are also characterized by a low value for Max E(NUF). The PEDC value can be used for estimating the probability of patient harm, allowing for the selection of appropriate QC procedures in QC planning based on risk management. © 2016 American Association for Clinical Chemistry.

10 CFR 603.400 - Competitive procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-based selection process, as described in 10 CFR 600.6 and 600.13, respectively: (a) In every case where... use competitive procedures, the contracting officer must comply with the requirements in 10 CFR 600.6...

41 CFR 60-3.9 - No assumption of validity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... general reputation of a test or other selection procedures, its author or its publisher, or casual reports... of validity based on a procedure's name or descriptive labels; all forms of promotional literature...

41 CFR 60-3.9 - No assumption of validity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... general reputation of a test or other selection procedures, its author or its publisher, or casual reports... of validity based on a procedure's name or descriptive labels; all forms of promotional literature...

hp-Adaptive time integration based on the BDF for viscous flows

NASA Astrophysics Data System (ADS)

Hay, A.; Etienne, S.; Pelletier, D.; Garon, A.

2015-06-01

This paper presents a procedure based on the Backward Differentiation Formulas of order 1 to 5 to obtain efficient time integration of the incompressible Navier-Stokes equations. The adaptive algorithm performs both stepsize and order selections to control respectively the solution accuracy and the computational efficiency of the time integration process. The stepsize selection (h-adaptivity) is based on a local error estimate and an error controller to guarantee that the numerical solution accuracy is within a user prescribed tolerance. The order selection (p-adaptivity) relies on the idea that low-accuracy solutions can be computed efficiently by low order time integrators while accurate solutions require high order time integrators to keep computational time low. The selection is based on a stability test that detects growing numerical noise and deems a method of order p stable if there is no method of lower order that delivers the same solution accuracy for a larger stepsize. Hence, it guarantees both that (1) the used method of integration operates inside of its stability region and (2) the time integration procedure is computationally efficient. The proposed time integration procedure also features a time-step rejection and quarantine mechanisms, a modified Newton method with a predictor and dense output techniques to compute solution at off-step points.

Prospective Bundled Payments in a Changing Environment: The Experience of a Self-Funded, State-Sponsored Plan.

PubMed

Lawler, Frank H; Wilson, Frank R; Smith, G Keith; Mitchell, Lynn V

2017-12-01

Healthcare reimbursement, which has traditionally been based on the quantity of services delivered, is currently moving toward value-based reimbursement-a system that addresses the quantity, quality, and cost of services. One such arrangement has been the evolution of bundled payments for a specific procedure or for an episode of care, paid prospectively or through post-hoc reconciliation. To evaluate the impact of instituting bundled payments that incorporate facility charges, physician fees, and all ancillary charges by the State of Oklahoma HealthChoice public employee insurance plan. From January 1 through December 31, 2016, HealthChoice, a large, government-sponsored Oklahoma health plan, implemented a voluntary, prospective, bundled payment system with network facilities, called Select. The Select program allows members at the time of certification of the services to opt to use participating facilities for specified services at a bundled rate, with deductible and coinsurance covered by the health plan. That is, the program allows any plan member to choose either a participating Select facility with no out-of-pocket costs or standard benefits at a participating network facility. During 2016, more than 7900 procedures were performed for 5907 patients who chose the Select arrangement (also designated as the intervention group). The most common outpatient Select procedures were for cardiology, colonoscopy, and magnetic resonance imaging scans. The most common inpatient procedures for Select-covered patients were in 6 diagnosis-related groups covering spinal fusions, joint replacement surgeries, and percutaneous coronary artery stenting. The allowable costs were similar for bundled procedures at ambulatory surgery centers and at outpatient hospital facilities; the allowable costs for patients not in the Select program (mean, $813) were lower at ambulatory surgery centers than at outpatient hospital departments (mean, $3086) because of differences in case mix. Patients in the Select system who had outpatient procedures had significantly fewer subsequent claims than those who were not in Select for hospitalization (1.7% vs 2.5%, respectively) and emergency department visits (4.4% vs 11.5%, respectively) in the 30 days postprocedure. Quality measures (eg, wound infection and reoperation) were similar for patients who were and were not in the Select group and had procedures. Surgical complication (ie, return to surgery) rates were higher for the Select group. The Select program demonstrated promising results during its first year of operation, suggesting that prospective bundled payment arrangements can be implemented successfully. Further research on reimbursement mechanisms, that is, how to pay physicians and facilities, and quality of outcomes is needed, especially with respect to which procedures are most suitable for this payment arrangement.

Prospective Bundled Payments in a Changing Environment: The Experience of a Self-Funded, State-Sponsored Plan

PubMed Central

Lawler, Frank H.; Wilson, Frank R.; Smith, G. Keith; Mitchell, Lynn V.

2017-01-01

Background Healthcare reimbursement, which has traditionally been based on the quantity of services delivered, is currently moving toward value-based reimbursement—a system that addresses the quantity, quality, and cost of services. One such arrangement has been the evolution of bundled payments for a specific procedure or for an episode of care, paid prospectively or through post-hoc reconciliation. Objective To evaluate the impact of instituting bundled payments that incorporate facility charges, physician fees, and all ancillary charges by the State of Oklahoma HealthChoice public employee insurance plan. Method From January 1 through December 31, 2016, HealthChoice, a large, government-sponsored Oklahoma health plan, implemented a voluntary, prospective, bundled payment system with network facilities, called Select. The Select program allows members at the time of certification of the services to opt to use participating facilities for specified services at a bundled rate, with deductible and coinsurance covered by the health plan. That is, the program allows any plan member to choose either a participating Select facility with no out-of-pocket costs or standard benefits at a participating network facility. Results During 2016, more than 7900 procedures were performed for 5907 patients who chose the Select arrangement (also designated as the intervention group). The most common outpatient Select procedures were for cardiology, colonoscopy, and magnetic resonance imaging scans. The most common inpatient procedures for Select-covered patients were in 6 diagnosis-related groups covering spinal fusions, joint replacement surgeries, and percutaneous coronary artery stenting. The allowable costs were similar for bundled procedures at ambulatory surgery centers and at outpatient hospital facilities; the allowable costs for patients not in the Select program (mean, $813) were lower at ambulatory surgery centers than at outpatient hospital departments (mean, $3086) because of differences in case mix. Patients in the Select system who had outpatient procedures had significantly fewer subsequent claims than those who were not in Select for hospitalization (1.7% vs 2.5%, respectively) and emergency department visits (4.4% vs 11.5%, respectively) in the 30 days postprocedure. Quality measures (eg, wound infection and reoperation) were similar for patients who were and were not in the Select group and had procedures. Surgical complication (ie, return to surgery) rates were higher for the Select group. Conclusion The Select program demonstrated promising results during its first year of operation, suggesting that prospective bundled payment arrangements can be implemented successfully. Further research on reimbursement mechanisms, that is, how to pay physicians and facilities, and quality of outcomes is needed, especially with respect to which procedures are most suitable for this payment arrangement. PMID:29403570

Modal-pushover-based ground-motion scaling procedure

USGS Publications Warehouse

Kalkan, Erol; Chopra, Anil K.

2011-01-01

Earthquake engineering is increasingly using nonlinear response history analysis (RHA) to demonstrate the performance of structures. This rigorous method of analysis requires selection and scaling of ground motions appropriate to design hazard levels. This paper presents a modal-pushover-based scaling (MPS) procedure to scale ground motions for use in a nonlinear RHA of buildings. In the MPS method, the ground motions are scaled to match to a specified tolerance, a target value of the inelastic deformation of the first-mode inelastic single-degree-of-freedom (SDF) system whose properties are determined by the first-mode pushover analysis. Appropriate for first-mode dominated structures, this approach is extended for structures with significant contributions of higher modes by considering elastic deformation of second-mode SDF systems in selecting a subset of the scaled ground motions. Based on results presented for three actual buildings-4, 6, and 13-story-the accuracy and efficiency of the MPS procedure are established and its superiority over the ASCE/SEI 7-05 scaling procedure is demonstrated.

An automatic optimum number of well-distributed ground control lines selection procedure based on genetic algorithm

NASA Astrophysics Data System (ADS)

Yavari, Somayeh; Valadan Zoej, Mohammad Javad; Salehi, Bahram

2018-05-01

The procedure of selecting an optimum number and best distribution of ground control information is important in order to reach accurate and robust registration results. This paper proposes a new general procedure based on Genetic Algorithm (GA) which is applicable for all kinds of features (point, line, and areal features). However, linear features due to their unique characteristics are of interest in this investigation. This method is called Optimum number of Well-Distributed ground control Information Selection (OWDIS) procedure. Using this method, a population of binary chromosomes is randomly initialized. The ones indicate the presence of a pair of conjugate lines as a GCL and zeros specify the absence. The chromosome length is considered equal to the number of all conjugate lines. For each chromosome, the unknown parameters of a proper mathematical model can be calculated using the selected GCLs (ones in each chromosome). Then, a limited number of Check Points (CPs) are used to evaluate the Root Mean Square Error (RMSE) of each chromosome as its fitness value. The procedure continues until reaching a stopping criterion. The number and position of ones in the best chromosome indicate the selected GCLs among all conjugate lines. To evaluate the proposed method, a GeoEye and an Ikonos Images are used over different areas of Iran. Comparing the obtained results by the proposed method in a traditional RFM with conventional methods that use all conjugate lines as GCLs shows five times the accuracy improvement (pixel level accuracy) as well as the strength of the proposed method. To prevent an over-parametrization error in a traditional RFM due to the selection of a high number of improper correlated terms, an optimized line-based RFM is also proposed. The results show the superiority of the combination of the proposed OWDIS method with an optimized line-based RFM in terms of increasing the accuracy to better than 0.7 pixel, reliability, and reducing systematic errors. These results also demonstrate the high potential of linear features as reliable control features to reach sub-pixel accuracy in registration applications.

Development and selection of Asian-specific humeral implants based on statistical atlas: toward planning minimally invasive surgery.

PubMed

Wu, K; Daruwalla, Z J; Wong, K L; Murphy, D; Ren, H

2015-08-01

The commercial humeral implants based on the Western population are currently not entirely compatible with Asian patients, due to differences in bone size, shape and structure. Surgeons may have to compromise or use different implants that are less conforming, which may cause complications of as well as inconvenience to the implant position. The construction of Asian humerus atlases of different clusters has therefore been proposed to eradicate this problem and to facilitate planning minimally invasive surgical procedures [6,31]. According to the features of the atlases, new implants could be designed specifically for different patients. Furthermore, an automatic implant selection algorithm has been proposed as well in order to reduce the complications caused by implant and bone mismatch. Prior to the design of the implant, data clustering and extraction of the relevant features were carried out on the datasets of each gender. The fuzzy C-means clustering method is explored in this paper. Besides, two new schemes of implant selection procedures, namely the Procrustes analysis-based scheme and the group average distance-based scheme, were proposed to better search for the matching implants for new coming patients from the database. Both these two algorithms have not been used in this area, while they turn out to have excellent performance in implant selection. Additionally, algorithms to calculate the matching scores between various implants and the patient data are proposed in this paper to assist the implant selection procedure. The results obtained have indicated the feasibility of the proposed development and selection scheme. The 16 sets of male data were divided into two clusters with 8 and 8 subjects, respectively, and the 11 female datasets were also divided into two clusters with 5 and 6 subjects, respectively. Based on the features of each cluster, the implants designed by the proposed algorithm fit very well on their reference humeri and the proposed implant selection procedure allows for a scenario of treating a patient with merely a preoperative anatomical model in order to correctly select the implant that has the best fit. Based on the leave-one-out validation, it can be concluded that both the PA-based method and GAD-based method are able to achieve excellent performance when dealing with the problem of implant selection. The accuracy and average execution time for the PA-based method were 100 % and 0.132 s, respectively, while those of the GAD- based method were 100 % and 0.058 s. Therefore, the GAD-based method outperformed the PA-based method in terms of execution speed. The primary contributions of this paper include the proposal of methods for development of Asian-, gender- and cluster-specific implants based on shape features and selection of the best fit implants for future patients according to their features. To the best of our knowledge, this is the first work that proposes implant design and selection for Asian patients automatically based on features extracted from cluster-specific statistical atlases.

A procedure for testing the quality of LANDSAT atmospheric correction algorithms

NASA Technical Reports Server (NTRS)

Dias, L. A. V. (Principal Investigator); Vijaykumar, N. L.; Neto, G. C.

1982-01-01

There are two basic methods for testing the quality of an algorithm to minimize atmospheric effects on LANDSAT imagery: (1) test the results a posteriori, using ground truth or control points; (2) use a method based on image data plus estimation of additional ground and/or atmospheric parameters. A procedure based on the second method is described. In order to select the parameters, initially the image contrast is examined for a series of parameter combinations. The contrast improves for better corrections. In addition the correlation coefficient between two subimages, taken at different times, of the same scene is used for parameter's selection. The regions to be correlated should not have changed considerably in time. A few examples using this proposed procedure are presented.

Efficient Simulation Budget Allocation for Selecting an Optimal Subset

NASA Technical Reports Server (NTRS)

Chen, Chun-Hung; He, Donghai; Fu, Michael; Lee, Loo Hay

2008-01-01

We consider a class of the subset selection problem in ranking and selection. The objective is to identify the top m out of k designs based on simulated output. Traditional procedures are conservative and inefficient. Using the optimal computing budget allocation framework, we formulate the problem as that of maximizing the probability of correc tly selecting all of the top-m designs subject to a constraint on the total number of samples available. For an approximation of this corre ct selection probability, we derive an asymptotically optimal allocat ion and propose an easy-to-implement heuristic sequential allocation procedure. Numerical experiments indicate that the resulting allocatio ns are superior to other methods in the literature that we tested, and the relative efficiency increases for larger problems. In addition, preliminary numerical results indicate that the proposed new procedur e has the potential to enhance computational efficiency for simulation optimization.

Rail Passenger Vehicle Truck Design Methodology

DOT National Transportation Integrated Search

1981-01-01

A procedure for the selection of rail passenger truck design parameters to meet dynamic performance indices has been developed. The procedure is based upon partitioning the design task into three tradeoff studies: (1) a vertical ride quality-secondar...

Lessons learned from 15 years of non-grades-based selection for medical school.

PubMed

Stegers-Jager, Karen M

2018-01-01

Thirty years ago, it was suggested in the Edinburgh Declaration that medical school applicants should be selected not only on academic, but also on non-academic, attributes. The main rationale behind extending medical school selection procedures with the evaluation of (non-academic) personal qualities is that this will lead to the selection of students who will perform better as a doctor than those who are selected on the basis of academic measures only. A second rationale is the expectation that this will lead to a representative health workforce as a result of reduced adverse impact. The aims of this paper are (i) to describe what can be learned about the use of selection criteria other than grades from over 15 years of Dutch experience and (ii) to summarise current knowledge on the issue of adverse impact in relation to non-grades-based selection. A narrative review was undertaken of the (published) evidence that has resulted from non-grades-based school-specific selection procedures in the Netherlands and from recent explorations of the effect of the use of non-grades-based selection criteria on student diversity. The Dutch evidence is grouped into five key themes: the effect of participation in voluntary selection procedures, the assessment of pre-university extracurricular activities, the use of work samples, Dutch experiences with situational judgement tests and the effects of changing circumstances. This is followed by several lessons learned for medical schools that aim to increase their student diversity. Over the last 30 years, important steps towards reliable and valid methods for measuring non-academic abilities have been taken. The current paper describes several lessons that can be learned from the steps taken in the Dutch context. The importance of sharing evidence gathered around the globe and building on this evidence to reach our goal of predicting who will be a good doctor is acknowledged. © 2017 The Authors. Medical Education published by Association for the Study of Medical Education and John Wiley & Sons Ltd.

Improved Variable Selection Algorithm Using a LASSO-Type Penalty, with an Application to Assessing Hepatitis B Infection Relevant Factors in Community Residents

PubMed Central

Guo, Pi; Zeng, Fangfang; Hu, Xiaomin; Zhang, Dingmei; Zhu, Shuming; Deng, Yu; Hao, Yuantao

2015-01-01

Objectives In epidemiological studies, it is important to identify independent associations between collective exposures and a health outcome. The current stepwise selection technique ignores stochastic errors and suffers from a lack of stability. The alternative LASSO-penalized regression model can be applied to detect significant predictors from a pool of candidate variables. However, this technique is prone to false positives and tends to create excessive biases. It remains challenging to develop robust variable selection methods and enhance predictability. Material and methods Two improved algorithms denoted the two-stage hybrid and bootstrap ranking procedures, both using a LASSO-type penalty, were developed for epidemiological association analysis. The performance of the proposed procedures and other methods including conventional LASSO, Bolasso, stepwise and stability selection models were evaluated using intensive simulation. In addition, methods were compared by using an empirical analysis based on large-scale survey data of hepatitis B infection-relevant factors among Guangdong residents. Results The proposed procedures produced comparable or less biased selection results when compared to conventional variable selection models. In total, the two newly proposed procedures were stable with respect to various scenarios of simulation, demonstrating a higher power and a lower false positive rate during variable selection than the compared methods. In empirical analysis, the proposed procedures yielding a sparse set of hepatitis B infection-relevant factors gave the best predictive performance and showed that the procedures were able to select a more stringent set of factors. The individual history of hepatitis B vaccination, family and individual history of hepatitis B infection were associated with hepatitis B infection in the studied residents according to the proposed procedures. Conclusions The newly proposed procedures improve the identification of significant variables and enable us to derive a new insight into epidemiological association analysis. PMID:26214802

A Comparison of a Bayesian and a Maximum Likelihood Tailored Testing Procedure.

ERIC Educational Resources Information Center

McKinley, Robert L.; Reckase, Mark D.

A study was conducted to compare tailored testing procedures based on a Bayesian ability estimation technique and on a maximum likelihood ability estimation technique. The Bayesian tailored testing procedure selected items so as to minimize the posterior variance of the ability estimate distribution, while the maximum likelihood tailored testing…

Transition Process of Procedural to Conceptual Understanding in Solving Mathematical Problems

ERIC Educational Resources Information Center

Fatqurhohman

2016-01-01

This article aims to describe the transition process from procedural understanding to conceptual understanding in solving mathematical problems. Subjects in this study were three students from 20 fifth grade students of SDN 01 Sumberberas Banyuwangi selected based on the results of the students' answers. The transition process from procedural to…

Item Selection for the Development of Parallel Forms from an IRT-Based Seed Test Using a Sampling and Classification Approach

ERIC Educational Resources Information Center

Chen, Pei-Hua; Chang, Hua-Hua; Wu, Haiyan

2012-01-01

Two sampling-and-classification-based procedures were developed for automated test assembly: the Cell Only and the Cell and Cube methods. A simulation study based on a 540-item bank was conducted to compare the performance of the procedures with the performance of a mixed-integer programming (MIP) method for assembling multiple parallel test…

Effects of medical school selection on student motivation: a PhD thesis report.

PubMed

Wouters, Anouk

2018-02-01

High stakes are involved in student selection, for both medical schools and applicants. This thesis investigated the effects of selection on the medical student population and applicant pool in the Dutch setting. This thesis consists of six papers: two quantitative studies, one qualitative study, two mixed methods studies and one perspective paper based on a review of the literature. (1) Compared with a lottery, selection does not result in a student population with better motivation, engagement and performance, both in the clinical and pre-clinical phases of the study. (2) Selection seems to have a temporary stimulating effect on student motivation through enhancing perceived autonomy, competence and relatedness. (3) Applicants adopt a strategic approach, based on the selection procedure, in their choice of medical school. (4) The description of an applicant's motivation is not a reliable and valid tool to assess motivation during selection. (5) Gaining healthcare experience is crucial for applicants' motivation, but inequalities in access to such experiences can demotivate certain student groups from applying to medical school. (6) The gains yielded from selection compared with a lottery seem to be small. Unintentionally induced self-selection among certain groups of students and biased selection procedures may compromise student diversity. The added value of selection procedures compared with a weighted lottery for admitting students to medical school is questionable. Students are generally motivated and perform well, irrespective of how they enrolled in medical school. Selection yields only small gains, while student diversity may be hampered.

Comparison between splines and fractional polynomials for multivariable model building with continuous covariates: a simulation study with continuous response.

PubMed

Binder, Harald; Sauerbrei, Willi; Royston, Patrick

2013-06-15

In observational studies, many continuous or categorical covariates may be related to an outcome. Various spline-based procedures or the multivariable fractional polynomial (MFP) procedure can be used to identify important variables and functional forms for continuous covariates. This is the main aim of an explanatory model, as opposed to a model only for prediction. The type of analysis often guides the complexity of the final model. Spline-based procedures and MFP have tuning parameters for choosing the required complexity. To compare model selection approaches, we perform a simulation study in the linear regression context based on a data structure intended to reflect realistic biomedical data. We vary the sample size, variance explained and complexity parameters for model selection. We consider 15 variables. A sample size of 200 (1000) and R(2)  = 0.2 (0.8) is the scenario with the smallest (largest) amount of information. For assessing performance, we consider prediction error, correct and incorrect inclusion of covariates, qualitative measures for judging selected functional forms and further novel criteria. From limited information, a suitable explanatory model cannot be obtained. Prediction performance from all types of models is similar. With a medium amount of information, MFP performs better than splines on several criteria. MFP better recovers simpler functions, whereas splines better recover more complex functions. For a large amount of information and no local structure, MFP and the spline procedures often select similar explanatory models. Copyright © 2012 John Wiley & Sons, Ltd.

VARIABLE SELECTION FOR REGRESSION MODELS WITH MISSING DATA

PubMed Central

Garcia, Ramon I.; Ibrahim, Joseph G.; Zhu, Hongtu

2009-01-01

We consider the variable selection problem for a class of statistical models with missing data, including missing covariate and/or response data. We investigate the smoothly clipped absolute deviation penalty (SCAD) and adaptive LASSO and propose a unified model selection and estimation procedure for use in the presence of missing data. We develop a computationally attractive algorithm for simultaneously optimizing the penalized likelihood function and estimating the penalty parameters. Particularly, we propose to use a model selection criterion, called the ICQ statistic, for selecting the penalty parameters. We show that the variable selection procedure based on ICQ automatically and consistently selects the important covariates and leads to efficient estimates with oracle properties. The methodology is very general and can be applied to numerous situations involving missing data, from covariates missing at random in arbitrary regression models to nonignorably missing longitudinal responses and/or covariates. Simulations are given to demonstrate the methodology and examine the finite sample performance of the variable selection procedures. Melanoma data from a cancer clinical trial is presented to illustrate the proposed methodology. PMID:20336190

Online selective kernel-based temporal difference learning.

PubMed

Chen, Xingguo; Gao, Yang; Wang, Ruili

2013-12-01

In this paper, an online selective kernel-based temporal difference (OSKTD) learning algorithm is proposed to deal with large scale and/or continuous reinforcement learning problems. OSKTD includes two online procedures: online sparsification and parameter updating for the selective kernel-based value function. A new sparsification method (i.e., a kernel distance-based online sparsification method) is proposed based on selective ensemble learning, which is computationally less complex compared with other sparsification methods. With the proposed sparsification method, the sparsified dictionary of samples is constructed online by checking if a sample needs to be added to the sparsified dictionary. In addition, based on local validity, a selective kernel-based value function is proposed to select the best samples from the sample dictionary for the selective kernel-based value function approximator. The parameters of the selective kernel-based value function are iteratively updated by using the temporal difference (TD) learning algorithm combined with the gradient descent technique. The complexity of the online sparsification procedure in the OSKTD algorithm is O(n). In addition, two typical experiments (Maze and Mountain Car) are used to compare with both traditional and up-to-date O(n) algorithms (GTD, GTD2, and TDC using the kernel-based value function), and the results demonstrate the effectiveness of our proposed algorithm. In the Maze problem, OSKTD converges to an optimal policy and converges faster than both traditional and up-to-date algorithms. In the Mountain Car problem, OSKTD converges, requires less computation time compared with other sparsification methods, gets a better local optima than the traditional algorithms, and converges much faster than the up-to-date algorithms. In addition, OSKTD can reach a competitive ultimate optima compared with the up-to-date algorithms.

NewGate Model.

ERIC Educational Resources Information Center

National Council on Crime and Delinquency, Hackensack, NJ. NewGate Resource Center.

A guide is provided for establishing a college-level education program for inmates of correctional institutions based on the NewGate concept. Necessary first steps are evaluation of current facilities, selection of the sponsoring agency, and selection of the student body. Guidelines for student selection deal with application procedure, record…

Two Paradoxes in Linear Regression Analysis.

PubMed

Feng, Ge; Peng, Jing; Tu, Dongke; Zheng, Julia Z; Feng, Changyong

2016-12-25

Regression is one of the favorite tools in applied statistics. However, misuse and misinterpretation of results from regression analysis are common in biomedical research. In this paper we use statistical theory and simulation studies to clarify some paradoxes around this popular statistical method. In particular, we show that a widely used model selection procedure employed in many publications in top medical journals is wrong. Formal procedures based on solid statistical theory should be used in model selection.

Establishing Arbitrarily Applicable Relations of Same and Opposite with the Relational Completion Procedure: Selection-Based Feedback

ERIC Educational Resources Information Center

Dymond, Simon; Ng, Tsz Ching; Whelan, Robert

2013-01-01

Research suggests that the relational completion procedure (RCP) is effective for studying derived relations of same and opposite. Previously, procedural parameters, such as the presence or absence of a confirmatory response requirement, were found to have a facilitative effect on the number of training trials to criterion and overall arbitrary…

Capture-SELEX: Selection of DNA Aptamers for Aminoglycoside Antibiotics

PubMed Central

2012-01-01

Small organic molecules are challenging targets for an aptamer selection using the SELEX technology (SELEX—Systematic Evolution of Ligans by EXponential enrichment). Often they are not suitable for immobilization on solid surfaces, which is a common procedure in known aptamer selection methods. The Capture-SELEX procedure allows the selection of DNA aptamers for solute targets. A special SELEX library was constructed with the aim to immobilize this library on magnetic beads or other surfaces. For this purpose a docking sequence was incorporated into the random region of the library enabling hybridization to a complementary oligo fixed on magnetic beads. Oligonucleotides of the library which exhibit high affinity to the target and a secondary structure fitting to the target are released from the beads for binding to the target during the aptamer selection process. The oligonucleotides of these binding complexes were amplified, purified, and immobilized via the docking sequence to the magnetic beads as the starting point of the following selection round. Based on this Capture-SELEX procedure, the successful DNA aptamer selection for the aminoglycoside antibiotic kanamycin A as a small molecule target is described. PMID:23326761

A multi-site study on medical school selection, performance, motivation and engagement.

PubMed

Wouters, A; Croiset, G; Schripsema, N R; Cohen-Schotanus, J; Spaai, G W G; Hulsman, R L; Kusurkar, R A

2017-05-01

Medical schools seek ways to improve their admissions strategies, since the available methods prove to be suboptimal for selecting the best and most motivated students. In this multi-site cross-sectional questionnaire study, we examined the value of (different) selection procedures compared to a weighted lottery procedure, which includes direct admission based on top pre-university grade point averages (≥8 out of 10; top-pu-GPA). We also considered whether students had participated in selection, prior to being admitted through weighted lottery. Year-1 (pre-clinical) and Year-4 (clinical) students completed standard validated questionnaires measuring quality of motivation (Academic Self-regulation Questionnaire), strength of motivation (Strength of Motivation for Medical School-Revised) and engagement (Utrecht Work Engagement Scale-Student). Performance data comprised GPA and course credits in Year-1 and clerkship performance in Year-4. Regression analyses were performed. The response rate was 35% (387 Year-1 and 273 Year-4 students). Top-pu-GPA students outperformed selected students. Selected Year-1 students reported higher strength of motivation than top-pu-GPA students. Selected students did not outperform or show better quality of motivation and engagement than lottery-admitted students. Participation in selection was associated with higher engagement and better clerkship performance in Year-4. GPA, course credits and strength of motivation in Year-1 differed between students admitted through different selection procedures. Top-pu-GPA students perform best in the medical study. The few and small differences found raise questions about the added value of an extensive selection procedure compared to a weighted lottery procedure. Findings have to be interpreted with caution because of a low response rate and small group sizes.

Classifying the Indication for Colonoscopy Procedures: A Comparison of NLP Approaches in a Diverse National Healthcare System.

PubMed

Patterson, Olga V; Forbush, Tyler B; Saini, Sameer D; Moser, Stephanie E; DuVall, Scott L

2015-01-01

In order to measure the level of utilization of colonoscopy procedures, identifying the primary indication for the procedure is required. Colonoscopies may be utilized not only for screening, but also for diagnostic or therapeutic purposes. To determine whether a colonoscopy was performed for screening, we created a natural language processing system to identify colonoscopy reports in the electronic medical record system and extract indications for the procedure. A rule-based model and three machine-learning models were created using 2,000 manually annotated clinical notes of patients cared for in the Department of Veterans Affairs. Performance of the models was measured and compared. Analysis of the models on a test set of 1,000 documents indicates that the rule-based system performance stays fairly constant as evaluated on training and testing sets. However, the machine learning model without feature selection showed significant decrease in performance. Therefore, rule-based classification system appears to be more robust than a machine-learning system in cases when no feature selection is performed.

A Fuzzy-Based Decision Support Model for Selecting the Best Dialyser Flux in Haemodialysis.

PubMed

Oztürk, Necla; Tozan, Hakan

2015-01-01

Decision making is an important procedure for every organization. The procedure is particularly challenging for complicated multi-criteria problems. Selection of dialyser flux is one of the decisions routinely made for haemodialysis treatment provided for chronic kidney failure patients. This study provides a decision support model for selecting the best dialyser flux between high-flux and low-flux dialyser alternatives. The preferences of decision makers were collected via a questionnaire. A total of 45 questionnaires filled by dialysis physicians and nephrologists were assessed. A hybrid fuzzy-based decision support software that enables the use of Analytic Hierarchy Process (AHP), Fuzzy Analytic Hierarchy Process (FAHP), Analytic Network Process (ANP), and Fuzzy Analytic Network Process (FANP) was used to evaluate the flux selection model. In conclusion, the results showed that a high-flux dialyser is the best. option for haemodialysis treatment.

Rational Density Functional Selection Using Game Theory.

PubMed

McAnanama-Brereton, Suzanne; Waller, Mark P

2018-01-22

Theoretical chemistry has a paradox of choice due to the availability of a myriad of density functionals and basis sets. Traditionally, a particular density functional is chosen on the basis of the level of user expertise (i.e., subjective experiences). Herein we circumvent the user-centric selection procedure by describing a novel approach for objectively selecting a particular functional for a given application. We achieve this by employing game theory to identify optimal functional/basis set combinations. A three-player (accuracy, complexity, and similarity) game is devised, through which Nash equilibrium solutions can be obtained. This approach has the advantage that results can be systematically improved by enlarging the underlying knowledge base, and the deterministic selection procedure mathematically justifies the density functional and basis set selections.

Two Paradoxes in Linear Regression Analysis

PubMed Central

FENG, Ge; PENG, Jing; TU, Dongke; ZHENG, Julia Z.; FENG, Changyong

2016-01-01

Summary Regression is one of the favorite tools in applied statistics. However, misuse and misinterpretation of results from regression analysis are common in biomedical research. In this paper we use statistical theory and simulation studies to clarify some paradoxes around this popular statistical method. In particular, we show that a widely used model selection procedure employed in many publications in top medical journals is wrong. Formal procedures based on solid statistical theory should be used in model selection. PMID:28638214

Alternative Modal Basis Selection Procedures for Nonlinear Random Response Simulation

NASA Technical Reports Server (NTRS)

Przekop, Adam; Guo, Xinyun; Rizzi, Stephen A.

2010-01-01

Three procedures to guide selection of an efficient modal basis in a nonlinear random response analysis are examined. One method is based only on proper orthogonal decomposition, while the other two additionally involve smooth orthogonal decomposition. Acoustic random response problems are employed to assess the performance of the three modal basis selection approaches. A thermally post-buckled beam exhibiting snap-through behavior, a shallowly curved arch in the auto-parametric response regime and a plate structure are used as numerical test articles. The results of the three reduced-order analyses are compared with the results of the computationally taxing simulation in the physical degrees of freedom. For the cases considered, all three methods are shown to produce modal bases resulting in accurate and computationally efficient reduced-order nonlinear simulations.

Knowledge-Based Manufacturing and Structural Design for a High Speed Civil Transport

NASA Technical Reports Server (NTRS)

Marx, William J.; Mavris, Dimitri N.; Schrage, Daniel P.

1994-01-01

The aerospace industry is currently addressing the problem of integrating manufacturing and design. To address the difficulties associated with using many conventional procedural techniques and algorithms, one feasible way to integrate the two concepts is with the development of an appropriate Knowledge-Based System (KBS). The authors present their reasons for selecting a KBS to integrate design and manufacturing. A methodology for an aircraft producibility assessment is proposed, utilizing a KBS for manufacturing process selection, that addresses both procedural and heuristic aspects of designing and manufacturing of a High Speed Civil Transport (HSCT) wing. A cost model is discussed that would allow system level trades utilizing information describing the material characteristics as well as the manufacturing process selections. Statements of future work conclude the paper.

Canonical Measure of Correlation (CMC) and Canonical Measure of Distance (CMD) between sets of data. Part 3. Variable selection in classification.

PubMed

Ballabio, Davide; Consonni, Viviana; Mauri, Andrea; Todeschini, Roberto

2010-01-11

In multivariate regression and classification issues variable selection is an important procedure used to select an optimal subset of variables with the aim of producing more parsimonious and eventually more predictive models. Variable selection is often necessary when dealing with methodologies that produce thousands of variables, such as Quantitative Structure-Activity Relationships (QSARs) and highly dimensional analytical procedures. In this paper a novel method for variable selection for classification purposes is introduced. This method exploits the recently proposed Canonical Measure of Correlation between two sets of variables (CMC index). The CMC index is in this case calculated for two specific sets of variables, the former being comprised of the independent variables and the latter of the unfolded class matrix. The CMC values, calculated by considering one variable at a time, can be sorted and a ranking of the variables on the basis of their class discrimination capabilities results. Alternatively, CMC index can be calculated for all the possible combinations of variables and the variable subset with the maximal CMC can be selected, but this procedure is computationally more demanding and classification performance of the selected subset is not always the best one. The effectiveness of the CMC index in selecting variables with discriminative ability was compared with that of other well-known strategies for variable selection, such as the Wilks' Lambda, the VIP index based on the Partial Least Squares-Discriminant Analysis, and the selection provided by classification trees. A variable Forward Selection based on the CMC index was finally used in conjunction of Linear Discriminant Analysis. This approach was tested on several chemical data sets. Obtained results were encouraging.

A pictorial review of reconstructive foot and ankle surgery: hallux abductovalgus

PubMed Central

Meyr, Andrew J; Singh, Salil; Chen, Oliver; Ali, Sayed

2015-01-01

This pictorial review focuses on basic procedures performed within the field of podiatric surgery, specifically for the hallux abductovalgus or “bunion” deformity. Our goal is to define objective radiographic parameters that surgeons utilize to initially define deformity, lead to procedure selection and judge post-operative outcomes. We hope that radiologists will employ this information to improve their assessment of post-operative radiographs following reconstructive foot surgeries. First, relevant radiographic measurements are defined and their role in procedure selection explained. Second, the specific surgical procedures of the distal metatarsal, metatarsal shaft, metatarsal base, and phalangeal osteotomies are described in detail. Additional explanations of arthrodesis of the first metatarsal-phalangeal and metatarsal-cuneiform joints are also provided. Finally, specific plain film radiographic findings that judge post-operative outcomes for each procedure are detailed. PMID:26622935

Selection of Variables in Cluster Analysis: An Empirical Comparison of Eight Procedures

ERIC Educational Resources Information Center

Steinley, Douglas; Brusco, Michael J.

2008-01-01

Eight different variable selection techniques for model-based and non-model-based clustering are evaluated across a wide range of cluster structures. It is shown that several methods have difficulties when non-informative variables (i.e., random noise) are included in the model. Furthermore, the distribution of the random noise greatly impacts the…

24 CFR 983.51 - Owner proposal selection procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Owner proposal selection procedures... proposal selection procedures. (a) Procedures for selecting PBV proposals. The PHA administrative plan must describe the procedures for owner submission of PBV proposals and for PHA selection of PBV proposals...

A simple spectrophotometric method for determination of zirconium or hafnium in selected molybdenum-base alloys

NASA Technical Reports Server (NTRS)

Dupraw, W. A.

1972-01-01

A simple analytical procedure is described for accurately and precisely determining the zirconium or hafnium content of molybdenum-base alloys. The procedure is based on the reaction of the reagent Arsenazo III with zirconium or hafnium in strong hydrochloric acid solution. The colored complexes of zirconium or hafnium are formed in the presence of molybdenum. Titanium or rhenium in the alloy have no adverse effect on the zirconium or hafnium complex at the following levels in the selected aliquot: Mo, 10 mg; Re, 10 mg; Ti, 1 mg. The spectrophotometric measurement of the zirconium or hafnium complex is accomplished without prior separation with a relative standard deviation of 1.3 to 2.7 percent.

Practical Guide for the Selection of Audio Visual Media. General Criteria System and Evaluation Procedure for Educational Media Decisions.

ERIC Educational Resources Information Center

Klepzig, H. J.; Weiss, M.

Designed to aid in making concrete decisions on the acquisition and use of media, the criteria system and evaluation procedure described is a multiphase, objective-based decision making process. This report includes guidelines for setting up goal systems and developing criteria for the evaluation of media based on a goal system; an outline of…

Ground Training Devices in Job Sample Approach to UPT [Undergraduate Pilot Training] Selection and Screening. Final Report, September 1972-August 1974.

ERIC Educational Resources Information Center

LeMaster, W. Dean; Gray, Thomas H.

The purpose of this study was to develop a screening procedure for undergraduate pilot training (UPT). This procedure was based upon the use of ground-based instrument trainers in which UPT candidates, naive to flying, were evaluated in their performance of job sample tasks; i.e., basic instrument flying. Training and testing sessions were…

The impact of functional analysis methodology on treatment choice for self-injurious and aggressive behavior.

PubMed Central

Pelios, L; Morren, J; Tesch, D; Axelrod, S

1999-01-01

Self-injurious behavior (SIB) and aggression have been the concern of researchers because of the serious impact these behaviors have on individuals' lives. Despite the plethora of research on the treatment of SIB and aggressive behavior, the reported findings have been inconsistent regarding the effectiveness of reinforcement-based versus punishment-based procedures. We conducted a literature review to determine whether a trend could be detected in researchers' selection of reinforcement-based procedures versus punishment-based procedures, particularly since the introduction of functional analysis to behavioral assessment. The data are consistent with predictions made in the past regarding the potential impact of functional analysis methodology. Specifically, the findings indicate that, once maintaining variables for problem behavior are identified, experimenters tend to choose reinforcement-based procedures rather than punishment-based procedures as treatment for both SIB and aggressive behavior. Results indicated an increased interest in studies on the treatment of SIB and aggressive behavior, particularly since 1988. PMID:10396771

Input variable selection and calibration data selection for storm water quality regression models.

PubMed

Sun, Siao; Bertrand-Krajewski, Jean-Luc

2013-01-01

Storm water quality models are useful tools in storm water management. Interest has been growing in analyzing existing data for developing models for urban storm water quality evaluations. It is important to select appropriate model inputs when many candidate explanatory variables are available. Model calibration and verification are essential steps in any storm water quality modeling. This study investigates input variable selection and calibration data selection in storm water quality regression models. The two selection problems are mutually interacted. A procedure is developed in order to fulfil the two selection tasks in order. The procedure firstly selects model input variables using a cross validation method. An appropriate number of variables are identified as model inputs to ensure that a model is neither overfitted nor underfitted. Based on the model input selection results, calibration data selection is studied. Uncertainty of model performances due to calibration data selection is investigated with a random selection method. An approach using the cluster method is applied in order to enhance model calibration practice based on the principle of selecting representative data for calibration. The comparison between results from the cluster selection method and random selection shows that the former can significantly improve performances of calibrated models. It is found that the information content in calibration data is important in addition to the size of calibration data.

Computer Use of a Medical Dictionary to Select Search Words.

ERIC Educational Resources Information Center

O'Connor, John

1986-01-01

Explains an experiment in text-searching retrieval for cancer questions which developed and used computer procedures (via human simulation) to select search words from medical dictionaries. This study is based on an earlier one in which search words were humanly selected, and the recall results of the two studies are compared. (Author/LRW)

Investigation of lightweight designs and materials for LO2 and LH2 propellant tanks for space vehicles, phase 2 and phase 3

NASA Technical Reports Server (NTRS)

1976-01-01

Full size Tug LO2 and LH2 tank configurations were defined, based on selected tank geometries. These configurations were then locally modeled for computer stress analysis. A large subscale test tank, representing the selected Tug LO2 tank, was designed and analyzed. This tank was fabricated using procedures which represented production operations. An evaluation test program was outlined and a test procedure defined. The necessary test hardware was also fabricated.

Robust model selection and the statistical classification of languages

NASA Astrophysics Data System (ADS)

García, J. E.; González-López, V. A.; Viola, M. L. L.

2012-10-01

In this paper we address the problem of model selection for the set of finite memory stochastic processes with finite alphabet, when the data is contaminated. We consider m independent samples, with more than half of them being realizations of the same stochastic process with law Q, which is the one we want to retrieve. We devise a model selection procedure such that for a sample size large enough, the selected process is the one with law Q. Our model selection strategy is based on estimating relative entropies to select a subset of samples that are realizations of the same law. Although the procedure is valid for any family of finite order Markov models, we will focus on the family of variable length Markov chain models, which include the fixed order Markov chain model family. We define the asymptotic breakdown point (ABDP) for a model selection procedure, and we show the ABDP for our procedure. This means that if the proportion of contaminated samples is smaller than the ABDP, then, as the sample size grows our procedure selects a model for the process with law Q. We also use our procedure in a setting where we have one sample conformed by the concatenation of sub-samples of two or more stochastic processes, with most of the subsamples having law Q. We conducted a simulation study. In the application section we address the question of the statistical classification of languages according to their rhythmic features using speech samples. This is an important open problem in phonology. A persistent difficulty on this problem is that the speech samples correspond to several sentences produced by diverse speakers, corresponding to a mixture of distributions. The usual procedure to deal with this problem has been to choose a subset of the original sample which seems to best represent each language. The selection is made by listening to the samples. In our application we use the full dataset without any preselection of samples. We apply our robust methodology estimating a model which represent the main law for each language. Our findings agree with the linguistic conjecture, related to the rhythm of the languages included on our dataset.

US EPA Base Study Standard Operating Procedure for Sampling Volatile Organic Compounds in Indoor Air using Multisorbent Samplers

EPA Pesticide Factsheets

The objective of this procedure is to collect representative samples of volatile organic compound (VOC) contaminants present in indoor and outdoor environments using multisorbent samplers, and to subsequently analyze the concentration of VOCs, as selected by EPA.

Selecting Statistical Quality Control Procedures for Limiting the Impact of Increases in Analytical Random Error on Patient Safety.

PubMed

Yago, Martín

2017-05-01

QC planning based on risk management concepts can reduce the probability of harming patients due to an undetected out-of-control error condition. It does this by selecting appropriate QC procedures to decrease the number of erroneous results reported. The selection can be easily made by using published nomograms for simple QC rules when the out-of-control condition results in increased systematic error. However, increases in random error also occur frequently and are difficult to detect, which can result in erroneously reported patient results. A statistical model was used to construct charts for the 1 ks and X /χ 2 rules. The charts relate the increase in the number of unacceptable patient results reported due to an increase in random error with the capability of the measurement procedure. They thus allow for QC planning based on the risk of patient harm due to the reporting of erroneous results. 1 ks Rules are simple, all-around rules. Their ability to deal with increases in within-run imprecision is minimally affected by the possible presence of significant, stable, between-run imprecision. X /χ 2 rules perform better when the number of controls analyzed during each QC event is increased to improve QC performance. Using nomograms simplifies the selection of statistical QC procedures to limit the number of erroneous patient results reported due to an increase in analytical random error. The selection largely depends on the presence or absence of stable between-run imprecision. © 2017 American Association for Clinical Chemistry.

Image acquisition context: procedure description attributes for clinically relevant indexing and selective retrieval of biomedical images.

PubMed

Bidgood, W D; Bray, B; Brown, N; Mori, A R; Spackman, K A; Golichowski, A; Jones, R H; Korman, L; Dove, B; Hildebrand, L; Berg, M

1999-01-01

To support clinically relevant indexing of biomedical images and image-related information based on the attributes of image acquisition procedures and the judgments (observations) expressed by observers in the process of image interpretation. The authors introduce the notion of "image acquisition context," the set of attributes that describe image acquisition procedures, and present a standards-based strategy for utilizing the attributes of image acquisition context as indexing and retrieval keys for digital image libraries. The authors' indexing strategy is based on an interdependent message/terminology architecture that combines the Digital Imaging and Communication in Medicine (DICOM) standard, the SNOMED (Systematized Nomenclature of Human and Veterinary Medicine) vocabulary, and the SNOMED DICOM microglossary. The SNOMED DICOM microglossary provides context-dependent mapping of terminology to DICOM data elements. The capability of embedding standard coded descriptors in DICOM image headers and image-interpretation reports improves the potential for selective retrieval of image-related information. This favorably affects information management in digital libraries.

Development of techniques for producing static strata maps and development of photointerpretation methods based on multitemporal LANDSAT data

NASA Technical Reports Server (NTRS)

Colwell, R. N. (Principal Investigator); Hay, C. M.; Thomas, R. W.; Benson, A. S.

1976-01-01

The progress of research conducted in support of the Large Area Crop Inventory Experiment (LACIE) is documented. Specific tasks include (1) evaluation of the static stratification procedure and modification of that procedure if warranted, and (2) the development of alternative photointerpretative techniques to the present LACIE procedures for the identification and selection of training fields (areas).

48 CFR 715.370 - Alternative source selection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... selection procedures. 715.370 Section 715.370 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Source Selection 715.370 Alternative source selection procedures. The following selection procedures may be used, when...

Alternative Modal Basis Selection Procedures For Reduced-Order Nonlinear Random Response Simulation

NASA Technical Reports Server (NTRS)

Przekop, Adam; Guo, Xinyun; Rizi, Stephen A.

2012-01-01

Three procedures to guide selection of an efficient modal basis in a nonlinear random response analysis are examined. One method is based only on proper orthogonal decomposition, while the other two additionally involve smooth orthogonal decomposition. Acoustic random response problems are employed to assess the performance of the three modal basis selection approaches. A thermally post-buckled beam exhibiting snap-through behavior, a shallowly curved arch in the auto-parametric response regime and a plate structure are used as numerical test articles. The results of a computationally taxing full-order analysis in physical degrees of freedom are taken as the benchmark for comparison with the results from the three reduced-order analyses. For the cases considered, all three methods are shown to produce modal bases resulting in accurate and computationally efficient reduced-order nonlinear simulations.

US EPA Base Study Standard Operating Procedure for Continuous Monitoring of Indoor Air

EPA Pesticide Factsheets

The procedure described is intended for monitoring continuously and simultaneously, at selected work sites, parameters that are most commonly associated with the quality of indoor environments: the concentrations of carbon dioxide (CO2), carbon monoxide (CO), temperature, relative humidity (RH), illumination, and noise.

48 CFR 970.5217-1 - Work for Others Program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... selection is based on merit or peer review, the work involves basic or applied research to further advance... all Work for Others projects in accordance with the standards, policies, and procedures that apply to..., safeguards and classification procedures, and human and animal research regulations; (8) May subcontract...

US EPA Base Study Standard Operating Procedure for Sampling Volatile Organic Compounds in Indoor Air Using Evacuated Canisters

EPA Pesticide Factsheets

The objective of this procedure is to collect a representative sample of air containing volatile organic compound (VOC) contaminants present in an indoor environment using an evacuated canister, and to subsequently analyze the concentration of VOCs, as selected by EPA.

Identification and preparation of sperm for ART.

PubMed

Mehta, Akanksha; Sigman, Mark

2014-02-01

State-of-the-art techniques attempt to select sperm with the best functional capacity to produce pregnancy and, subsequently, healthy offspring. A variety of approaches are now being evaluated. Future approaches may allow for selection of sperm based on sperm DNA integrity, degree of aneuploidy, or apoptosis. Other approaches involve attempting to improve the in vitro function of sperm with exposure to compounds such as pentoxifylline or platelet activating factor. In the future, we are likely to see significant improvements in the ability to select the best sperm for assisted-reproductive-technology procedures and the use of these procedures in routine clinical practice. Copyright © 2014 Elsevier Inc. All rights reserved.

Carotid Artery Stenting – Strategies to Improve Procedural Performance and Reduce the Learning Curve

PubMed Central

Van Herzeele, Isabelle

2013-01-01

Carotid artery stenting (CAS) remains an appealing intervention to reduce the stroke risk because of its minimal invasive nature. Nevertheless, landmark randomised controlled trials have not been able to resolve the controversies surrounding this complex procedure as the peri-operative stroke risk in a non-selected patient population still seems to be higher after CAS in comparison to carotid endarterectomy. What is more, these trials have highlighted that patient outcome after CAS is influenced by patient- and operator-dependant factors. The CAS procedure exhibits a definitive learning curve resulting in higher complication rates if the procedure is performed by inexperienced interventionists or in low-volume centres. This article will outline strategies to improve the performance of physicians carrying out the CAS procedure by means of proficiency-based training, credentialing, virtual reality rehearsal and optimal patient selection. PMID:29588751

A procedure to select ground-motion time histories for deterministic seismic hazard analysis from the Next Generation Attenuation (NGA) database

NASA Astrophysics Data System (ADS)

Huang, Duruo; Du, Wenqi; Zhu, Hong

2017-10-01

In performance-based seismic design, ground-motion time histories are needed for analyzing dynamic responses of nonlinear structural systems. However, the number of ground-motion data at design level is often limited. In order to analyze seismic performance of structures, ground-motion time histories need to be either selected from recorded strong-motion database or numerically simulated using stochastic approaches. In this paper, a detailed procedure to select proper acceleration time histories from the Next Generation Attenuation (NGA) database for several cities in Taiwan is presented. Target response spectra are initially determined based on a local ground-motion prediction equation under representative deterministic seismic hazard analyses. Then several suites of ground motions are selected for these cities using the Design Ground Motion Library (DGML), a recently proposed interactive ground-motion selection tool. The selected time histories are representatives of the regional seismic hazard and should be beneficial to earthquake studies when comprehensive seismic hazard assessments and site investigations are unavailable. Note that this method is also applicable to site-specific motion selections with the target spectra near the ground surface considering the site effect.

Evaluation and selection of decision-making methods to assess landfill mining projects.

PubMed

Hermann, Robert; Baumgartner, Rupert J; Vorbach, Stefan; Ragossnig, Arne; Pomberger, Roland

2015-09-01

For the first time in Austria, fundamental technological and economic studies on recovering secondary raw materials from large landfills have been carried out, based on the 'LAMIS - Landfill Mining Austria' pilot project. A main focus of the research - and the subject of this article - was to develop an assessment or decision-making procedure that allows landfill owners to thoroughly examine the feasibility of a landfill mining project in advance. Currently there are no standard procedures that would sufficiently cover all the multiple-criteria requirements. The basic structure of the multiple attribute decision making process was used to narrow down on selection, conceptual design and assessment of suitable procedures. Along with a breakdown into preliminary and main assessment, the entire foundation required was created, such as definitions of requirements to an assessment method, selection and accurate description of the various assessment criteria and classification of the target system for the present 'landfill mining' vs. 'retaining the landfill in after-care' decision-making problem. Based on these studies, cost-utility analysis and the analytical-hierarchy process were selected from the range of multiple attribute decision-making procedures and examined in detail. Overall, both methods have their pros and cons with regard to their use for assessing landfill mining projects. Merging these methods or connecting them with single-criteria decision-making methods (like the net present value method) may turn out to be reasonable and constitute an appropriate assessment method. © The Author(s) 2015.

Required number of records for ASCE/SEI 7 ground-motion scaling procedure

USGS Publications Warehouse

Reyes, Juan C.; Kalkan, Erol

2011-01-01

The procedures and criteria in 2006 IBC (International Council of Building Officials, 2006) and 2007 CBC (International Council of Building Officials, 2007) for the selection and scaling ground-motions for use in nonlinear response history analysis (RHA) of structures are based on ASCE/SEI 7 provisions (ASCE, 2005, 2010). According to ASCE/SEI 7, earthquake records should be selected from events of magnitudes, fault distance, and source mechanisms that comply with the maximum considered earthquake, and then scaled so that the average value of the 5-percent-damped response spectra for the set of scaled records is not less than the design response spectrum over the period range from 0.2Tn to 1.5Tn sec (where Tn is the fundamental vibration period of the structure). If at least seven ground-motions are analyzed, the design values of engineering demand parameters (EDPs) are taken as the average of the EDPs determined from the analyses. If fewer than seven ground-motions are analyzed, the design values of EDPs are taken as the maximum values of the EDPs. ASCE/SEI 7 requires a minimum of three ground-motions. These limits on the number of records in the ASCE/SEI 7 procedure are based on engineering experience, rather than on a comprehensive evaluation. This study statistically examines the required number of records for the ASCE/SEI 7 procedure, such that the scaled records provide accurate, efficient, and consistent estimates of" true" structural responses. Based on elastic-perfectly-plastic and bilinear single-degree-of-freedom systems, the ASCE/SEI 7 scaling procedure is applied to 480 sets of ground-motions. The number of records in these sets varies from three to ten. The records in each set were selected either (i) randomly, (ii) considering their spectral shapes, or (iii) considering their spectral shapes and design spectral-acceleration value, A(Tn). As compared to benchmark (that is, "true") responses from unscaled records using a larger catalog of ground-motions, it is demonstrated that the ASCE/SEI 7 scaling procedure is overly conservative if fewer than seven ground-motions are employed. Utilizing seven or more randomly selected records provides a more accurate estimate of the EDPs accompanied by reduced record-to-record variability of the responses. Consistency in accuracy and efficiency is achieved only if records are selected on the basis of their spectral shape and A(Tn).

Simulator-Based Angiography and Endovascular Neurosurgery Curriculum: A Longitudinal Evaluation of Performance Following Simulator-Based Angiography Training.

PubMed

Pannell, J Scott; Santiago-Dieppa, David R; Wali, Arvin R; Hirshman, Brian R; Steinberg, Jeffrey A; Cheung, Vincent J; Oveisi, David; Hallstrom, Jon; Khalessi, Alexander A

2016-08-29

This study establishes performance metrics for angiography and neuroendovascular surgery procedures based on longitudinal improvement in individual trainees with differing levels of training and experience. Over the course of 30 days, five trainees performed 10 diagnostic angiograms, coiled 10 carotid terminus aneurysms in the setting of subarachnoid hemorrhage, and performed 10 left middle cerebral artery embolectomies on a Simbionix Angio Mentor™ simulator. All procedures were nonconsecutive. Total procedure time, fluoroscopy time, contrast dose, heart rate, blood pressures, medications administered, packing densities, the number of coils used, and the number of stent-retriever passes were recorded. Image quality was rated, and the absolute value of technically unsafe events was recorded. The trainees' device selection, macrovascular access, microvascular access, clinical management, and the overall performance of the trainee was rated during each procedure based on a traditional Likert scale score of 1=fail, 2=poor, 3=satisfactory, 4=good, and 5=excellent. These ordinal values correspond with published assessment scales on surgical technique. After performing five diagnostic angiograms and five embolectomies, all participants demonstrated marked decreases in procedure time, fluoroscopy doses, contrast doses, and adverse technical events; marked improvements in image quality, device selection, access scores, and overall technical performance were additionally observed (p < 0.05). Similarly, trainees demonstrated marked improvement in technical performance and clinical management after five coiling procedures (p < 0.05). However, trainees with less prior experience deploying coils continued to experience intra-procedural ruptures up to the eighth embolization procedure; this observation likely corresponded with less tactile procedural experience to an exertion of greater force than appropriate for coil placement. Trainees across all levels of training and prior experience demonstrated a significant performance improvement after completion of our simulator curriculum consisting of five diagnostic angiograms, five embolectomy cases, and 10 aneurysm coil embolizations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodriguez, Mario E.

An area in earthquake risk reduction that needs an urgent examination is the selection of earthquake records for nonlinear dynamic analysis of structures. An often-mentioned shortcoming from results of nonlinear dynamic analyses of structures is that these results are limited to the type of records that these analyses use as input data. This paper proposes a procedure for selecting earthquake records for nonlinear dynamic analysis of structures. This procedure uses a seismic damage index evaluated using the hysteretic energy dissipated by a Single Degree of Freedom System (SDOF) representing a multi-degree-of freedom structure responding to an earthquake record, and themore » plastic work capacity of the system at collapse. The type of structural system is considered using simple parameters. The proposed method is based on the evaluation of the damage index for a suite of earthquake records and a selected type of structural system. A set of 10 strong ground motion records is analyzed to show an application of the proposed procedure for selecting earthquake records for structural design.« less

The effects of predictor method factors on selection outcomes: A modular approach to personnel selection procedures.

PubMed

Lievens, Filip; Sackett, Paul R

2017-01-01

Past reviews and meta-analyses typically conceptualized and examined selection procedures as holistic entities. We draw on the product design literature to propose a modular approach as a complementary perspective to conceptualizing selection procedures. A modular approach means that a product is broken down into its key underlying components. Therefore, we start by presenting a modular framework that identifies the important measurement components of selection procedures. Next, we adopt this modular lens for reviewing the available evidence regarding each of these components in terms of affecting validity, subgroup differences, and applicant perceptions, as well as for identifying new research directions. As a complement to the historical focus on holistic selection procedures, we posit that the theoretical contributions of a modular approach include improved insight into the isolated workings of the different components underlying selection procedures and greater theoretical connectivity among different selection procedures and their literatures. We also outline how organizations can put a modular approach into operation to increase the variety in selection procedures and to enhance the flexibility in designing them. Overall, we believe that a modular perspective on selection procedures will provide the impetus for programmatic and theory-driven research on the different measurement components of selection procedures. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Strategy Guideline. Proper Water Heater Selection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoeschele, M.; Springer, D.; German, A.

2015-04-09

This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Strategy Guideline: Proper Water Heater Selection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoeschele, M.; Springer, D.; German, A.

2015-04-01

This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Selective isolation of gonyautoxins 1,4 from the dinoflagellate Alexandrium minutum based on molecularly imprinted solid-phase extraction.

PubMed

Lian, Ziru; Wang, Jiangtao

2017-09-15

Gonyautoxins 1,4 (GTX1,4) from Alexandrium minutum samples were isolated selectively and recognized specifically by an innovative and effective extraction procedure based on molecular imprinting technology. Novel molecularly imprinted polymer microspheres (MIPMs) were prepared by double-templated imprinting strategy using caffeine and pentoxifylline as dummy templates. The synthesized polymers displayed good affinity to GTX1,4 and were applied as sorbents. Further, an off-line molecularly imprinted solid-phase extraction (MISPE) protocol was optimized and an effective approach based on the MISPE coupled with HPLC-FLD was developed for selective isolation of GTX1,4 from the cultured A. minutum samples. The separation method showed good extraction efficiency (73.2-81.5%) for GTX1,4 and efficient removal of interferences matrices was also achieved after the MISPE process for the microalgal samples. The outcome demonstrated the superiority and great potential of the MISPE procedure for direct separation of GTX1,4 from marine microalgal extracts. Copyright © 2017. Published by Elsevier Ltd.

Variable Selection for Regression Models of Percentile Flows

NASA Astrophysics Data System (ADS)

Fouad, G.

2017-12-01

Percentile flows describe the flow magnitude equaled or exceeded for a given percent of time, and are widely used in water resource management. However, these statistics are normally unavailable since most basins are ungauged. Percentile flows of ungauged basins are often predicted using regression models based on readily observable basin characteristics, such as mean elevation. The number of these independent variables is too large to evaluate all possible models. A subset of models is typically evaluated using automatic procedures, like stepwise regression. This ignores a large variety of methods from the field of feature (variable) selection and physical understanding of percentile flows. A study of 918 basins in the United States was conducted to compare an automatic regression procedure to the following variable selection methods: (1) principal component analysis, (2) correlation analysis, (3) random forests, (4) genetic programming, (5) Bayesian networks, and (6) physical understanding. The automatic regression procedure only performed better than principal component analysis. Poor performance of the regression procedure was due to a commonly used filter for multicollinearity, which rejected the strongest models because they had cross-correlated independent variables. Multicollinearity did not decrease model performance in validation because of a representative set of calibration basins. Variable selection methods based strictly on predictive power (numbers 2-5 from above) performed similarly, likely indicating a limit to the predictive power of the variables. Similar performance was also reached using variables selected based on physical understanding, a finding that substantiates recent calls to emphasize physical understanding in modeling for predictions in ungauged basins. The strongest variables highlighted the importance of geology and land cover, whereas widely used topographic variables were the weakest predictors. Variables suffered from a high degree of multicollinearity, possibly illustrating the co-evolution of climatic and physiographic conditions. Given the ineffectiveness of many variables used here, future work should develop new variables that target specific processes associated with percentile flows.

Selection of relevant input variables in storm water quality modeling by multiobjective evolutionary polynomial regression paradigm

NASA Astrophysics Data System (ADS)

Creaco, E.; Berardi, L.; Sun, Siao; Giustolisi, O.; Savic, D.

2016-04-01

The growing availability of field data, from information and communication technologies (ICTs) in "smart" urban infrastructures, allows data modeling to understand complex phenomena and to support management decisions. Among the analyzed phenomena, those related to storm water quality modeling have recently been gaining interest in the scientific literature. Nonetheless, the large amount of available data poses the problem of selecting relevant variables to describe a phenomenon and enable robust data modeling. This paper presents a procedure for the selection of relevant input variables using the multiobjective evolutionary polynomial regression (EPR-MOGA) paradigm. The procedure is based on scrutinizing the explanatory variables that appear inside the set of EPR-MOGA symbolic model expressions of increasing complexity and goodness of fit to target output. The strategy also enables the selection to be validated by engineering judgement. In such context, the multiple case study extension of EPR-MOGA, called MCS-EPR-MOGA, is adopted. The application of the proposed procedure to modeling storm water quality parameters in two French catchments shows that it was able to significantly reduce the number of explanatory variables for successive analyses. Finally, the EPR-MOGA models obtained after the input selection are compared with those obtained by using the same technique without benefitting from input selection and with those obtained in previous works where other data-modeling techniques were used on the same data. The comparison highlights the effectiveness of both EPR-MOGA and the input selection procedure.

Rapid and selective extraction of multiple macrolide antibiotics in foodstuff samples based on magnetic molecularly imprinted polymers.

PubMed

Zhou, Yusun; Zhou, Tingting; Jin, Hua; Jing, Tao; Song, Bin; Zhou, Yikai; Mei, Surong; Lee, Yong-Ill

2015-05-01

Magnetic molecularly imprinted polymers (MMIPs) were prepared based on surface molecular imprinting using erythromycin (ERY) as template molecule and Fe3O4 nanoparticles as support substrate. The MMIPs possessed high adsorption capacity of 94.1 mg/g for ERY and the imprinting factor was 11.9 indicating good imprinted effect for ERY. Selective evaluation demonstrated favorable selectivity of MMIPs for multiple macrolide antibiotics (MACs). Using MMIPs as adsorptive material, a rapid and convenient magnetic solid-phase extraction (MSPE) procedure was established for simultaneous and selective separation of six MACs in pork, fish and shrimp samples, then the MACs was subjected to high-performance liquid chromatography-ultraviolet (HPLC-UV) analysis. At different fortified concentrations, the extraction recoveries could reach 89.1% and the relative standard deviations were lower than 12.4%. Chromatogram revealed the response signals of MACs in spiked samples were greatly enhanced and matrix interferences were effectively eliminated after treatment with MSPE. The proposed MSPE procedure coupled with HPLC-UV realized selective and sensitive determination of multiple MACs in foodstuff samples. Copyright © 2015 Elsevier B.V. All rights reserved.

Students' perceived experience of university admission based on tests and interviews.

PubMed

Röding, K; Nordenram, G

2005-11-01

The aim of the study was to generate an impression, from the perspective of graduating dental students, of the individualised admissions procedures, which they had undergone 5 years before. The subjects comprised 10 randomly selected students, five male and five female, from two different admission rounds. Qualitative research was used and data were collected by means of semi-structured interviews. The results show that even 5 years later, the students remember clearly the different steps in the selection procedure and they found the procedure relevant. In particular, the admission interviews made a lasting impression. The students consider that being interviewed by one admissions committee member at a time reduces the applicant's apprehension and allows a more personal interview. Several believe that the admissions procedure influences academic achievement or improves self-confidence: implicit in their selection by a committee of experienced professionals is affirmation that they have the potential to become good dentists. The students therefore feel encouraged to aspire to higher achievement. All students believe that motivation is an important non-cognitive attribute for success and that students selected through this mode are not only highly motivated but also well informed, with realistic expectations of the undergraduate programme and their future professional career.

Using Guided Notes, Choral Responding, and Response Cards to Increase Student Performance

ERIC Educational Resources Information Center

Blackwell, Ann J.; McLaughlin, T. F.

2005-01-01

This paper presents and selectively reviews the data-based literature regarding guided notes, choral responding, and response cards (ASR). These ASR procedures as designed to increase the opportunities for students to respond and improve their academic performance. Each of these procedures were effective in increasing student performance in…

Applied Comparative Effectiveness Researchers Must Measure Learning Rates: A Commentary on Efficiency Articles

ERIC Educational Resources Information Center

Skinner, Christopher H.

2010-01-01

Almost all academic skills deficits can be conceptualized as learning rate problems as students are not failing to learn, but not learning rapidly enough. Thus, when selecting among various possible remedial procedures, educators need an evidence base that indicates which procedure results in the greatest increases in learning rates. Previous…

A power set-based statistical selection procedure to locate susceptible rare variants associated with complex traits with sequencing data.

PubMed

Sun, Hokeun; Wang, Shuang

2014-08-15

Existing association methods for rare variants from sequencing data have focused on aggregating variants in a gene or a genetic region because of the fact that analysing individual rare variants is underpowered. However, these existing rare variant detection methods are not able to identify which rare variants in a gene or a genetic region of all variants are associated with the complex diseases or traits. Once phenotypic associations of a gene or a genetic region are identified, the natural next step in the association study with sequencing data is to locate the susceptible rare variants within the gene or the genetic region. In this article, we propose a power set-based statistical selection procedure that is able to identify the locations of the potentially susceptible rare variants within a disease-related gene or a genetic region. The selection performance of the proposed selection procedure was evaluated through simulation studies, where we demonstrated the feasibility and superior power over several comparable existing methods. In particular, the proposed method is able to handle the mixed effects when both risk and protective variants are present in a gene or a genetic region. The proposed selection procedure was also applied to the sequence data on the ANGPTL gene family from the Dallas Heart Study to identify potentially susceptible rare variants within the trait-related genes. An R package 'rvsel' can be downloaded from http://www.columbia.edu/∼sw2206/ and http://statsun.pusan.ac.kr. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Predictive models reduce talent development costs in female gymnastics.

PubMed

Pion, Johan; Hohmann, Andreas; Liu, Tianbiao; Lenoir, Matthieu; Segers, Veerle

2017-04-01

This retrospective study focuses on the comparison of different predictive models based on the results of a talent identification test battery for female gymnasts. We studied to what extent these models have the potential to optimise selection procedures, and at the same time reduce talent development costs in female artistic gymnastics. The dropout rate of 243 female elite gymnasts was investigated, 5 years past talent selection, using linear (discriminant analysis) and non-linear predictive models (Kohonen feature maps and multilayer perceptron). The coaches classified 51.9% of the participants correct. Discriminant analysis improved the correct classification to 71.6% while the non-linear technique of Kohonen feature maps reached 73.7% correctness. Application of the multilayer perceptron even classified 79.8% of the gymnasts correctly. The combination of different predictive models for talent selection can avoid deselection of high-potential female gymnasts. The selection procedure based upon the different statistical analyses results in decrease of 33.3% of cost because the pool of selected athletes can be reduced to 92 instead of 138 gymnasts (as selected by the coaches). Reduction of the costs allows the limited resources to be fully invested in the high-potential athletes.

29 CFR 1607.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2013 CFR

2013-07-01

... selection procedures and discrimination. 1607.3 Section 1607.3 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 1607.3 Discrimination defined: Relationship between use of selection procedures and...

A Feature and Algorithm Selection Method for Improving the Prediction of Protein Structural Class.

PubMed

Ni, Qianwu; Chen, Lei

2017-01-01

Correct prediction of protein structural class is beneficial to investigation on protein functions, regulations and interactions. In recent years, several computational methods have been proposed in this regard. However, based on various features, it is still a great challenge to select proper classification algorithm and extract essential features to participate in classification. In this study, a feature and algorithm selection method was presented for improving the accuracy of protein structural class prediction. The amino acid compositions and physiochemical features were adopted to represent features and thirty-eight machine learning algorithms collected in Weka were employed. All features were first analyzed by a feature selection method, minimum redundancy maximum relevance (mRMR), producing a feature list. Then, several feature sets were constructed by adding features in the list one by one. For each feature set, thirtyeight algorithms were executed on a dataset, in which proteins were represented by features in the set. The predicted classes yielded by these algorithms and true class of each protein were collected to construct a dataset, which were analyzed by mRMR method, yielding an algorithm list. From the algorithm list, the algorithm was taken one by one to build an ensemble prediction model. Finally, we selected the ensemble prediction model with the best performance as the optimal ensemble prediction model. Experimental results indicate that the constructed model is much superior to models using single algorithm and other models that only adopt feature selection procedure or algorithm selection procedure. The feature selection procedure or algorithm selection procedure are really helpful for building an ensemble prediction model that can yield a better performance. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Evaluation of new collision-pair selection models in DSMC

NASA Astrophysics Data System (ADS)

Akhlaghi, Hassan; Roohi, Ehsan

2017-10-01

The current paper investigates new collision-pair selection procedures in a direct simulation Monte Carlo (DSMC) method. Collision partner selection based on the random procedure from nearest neighbor particles and deterministic selection of nearest neighbor particles have already been introduced as schemes that provide accurate results in a wide range of problems. In the current research, new collision-pair selections based on the time spacing and direction of the relative movement of particles are introduced and evaluated. Comparisons between the new and existing algorithms are made considering appropriate test cases including fluctuations in homogeneous gas, 2D equilibrium flow, and Fourier flow problem. Distribution functions for number of particles and collisions in cell, velocity components, and collisional parameters (collision separation, time spacing, relative velocity, and the angle between relative movements of particles) are investigated and compared with existing analytical relations for each model. The capability of each model in the prediction of the heat flux in the Fourier problem at different cell numbers, numbers of particles, and time steps is examined. For new and existing collision-pair selection schemes, the effect of an alternative formula for the number of collision-pair selections and avoiding repetitive collisions are investigated via the prediction of the Fourier heat flux. The simulation results demonstrate the advantages and weaknesses of each model in different test cases.

Standard operating procedures for vascular surgery in erectile dysfunction: revascularization and venous procedures.

PubMed

Sohn, Michael; Hatzinger, Martin; Goldstein, Irwin; Krishnamurti, Sudhakar

2013-01-01

The impact of penile blood supply on erectile function was recognized some 500 years ago. At the turn of the 20th century first results of penile venous ligation were published and in 1973 the first surgical attempts to restore penile arterial inflow were undertaken. Numerous techniques were published in the meantime, but inclusion criteria, patient selection, and success evaluation differed extremely between study groups. To develop evidence-based standard operating procedures (SOPs) for vascular surgery in erectile dysfunction, based on recent state of the art consensus reports and recently published articles in peer-reviewed journals. Based on the recent publication of the consensus process during the 2009 International Consultation on Sexual Medicine in Paris, recommendations are derived for diagnosis and surgical treatment of vascular erectile dysfunction. In addition several recent publications in this field not mentioned in the consensus statements are included in the discussion. The Oxford system of evidence-based review was systematically applied. Due to the generally low level of evidence in this field expert opinions were accepted, if published after a well-defined consensus process in peer-reviewed journals. Referring to penile revascularization it may be concluded, that in the face of missing randomized trials, only recommendations grade D may be given: this kind of surgery may be offered to men less than 55 years, who are nonsmokers, nondiabetic, and demonstrate isolated arterial stenoses in the absence of generalized vascular disease. The evidence level for recommendations concerning penile venous ligations may be even lower. Too many unsolved controversies exist and universal diagnostic criteria for patient selection as well as operative technique selection have not been unequivocally established. This kind of surgery is still considered investigational but may be offered in special situations on an individualized basis in an investigational or research setting after obtaining written consent, using both pre- and postoperatively validated measuring instruments of success evaluation. SOPs for penile revascularization procedures can be developed, concerning a highly selected patient group with isolated arterial stenoses. Based on the available data it is not yet possible to define SOPs for surgical treatment of corporal veno-occlusive dysfunction. © 2012 International Society for Sexual Medicine.

A Review of Liposuction as a Cosmetic Surgical Procedure

PubMed Central

Sumrall, Arthur J.

1987-01-01

Liposuction (suction-assisted lipectomy) is today an accepted, closed surgical technique utilized by physicians practicing in a number of different specialties. It is a procedure that can be learned and used as an adjunct to a number of open procedures, including rhytidectomy and abdominoplasty. The two principal keys to successful liposuction procedures are: (1) good patient selection, and (2) realistic expectations. Good selection should be based on physiological skin age of the patient rather than chronological age. Many liposuction procedures can be performed under local anesthesia in an office surgical suite. A conservative approach is always appropriate, as overcorrection is difficult to treat. Areas that can be suctioned effectively include the face, chin, neck, anterior and posterior axilary areas, arms, breasts, abdomen, waist, hips, buttocks, thighs, knees, and ankles. Using the blunt cannula technique pioneered by Fischer and modified and popularized by Illouz and Fournier yields a high percentage of good results. A low percentage of possible complications and undesired sequelae have been documented. PMID:3323540

The development of an automatically produced cholangiography procedure using the reconstruction of portal-phase multidetector-row computed tomography images: preliminary experience.

PubMed

Hirose, Tomoaki; Igami, Tsuyoshi; Koga, Kusuto; Hayashi, Yuichiro; Ebata, Tomoki; Yokoyama, Yukihiro; Sugawara, Gen; Mizuno, Takashi; Yamaguchi, Junpei; Mori, Kensaku; Nagino, Masato

2017-03-01

Fusion angiography using reconstructed multidetector-row computed tomography (MDCT) images, and cholangiography using reconstructed images from MDCT with a cholangiographic agent include an anatomical gap due to the different periods of MDCT scanning. To conquer such gaps, we attempted to develop a cholangiography procedure that automatically reconstructs a cholangiogram from portal-phase MDCT images. The automatically produced cholangiography procedure utilized an original software program that was developed by the Graduate School of Information Science, Nagoya University. This program structured 5 candidate biliary tracts, and automatically selected one as the candidate for cholangiography. The clinical value of the automatically produced cholangiography procedure was estimated based on a comparison with manually produced cholangiography. Automatically produced cholangiograms were reconstructed for 20 patients who underwent MDCT scanning before biliary drainage for distal biliary obstruction. The procedure showed the ability to extract the 5 main biliary branches and the 21 subsegmental biliary branches in 55 and 25 % of the cases, respectively. The extent of aberrant connections and aberrant extractions outside the biliary tract was acceptable. Among all of the cholangiograms, 5 were clinically applied with no correction, 8 were applied with modest improvements, and 3 produced a correct cholangiography before automatic selection. Although our procedure requires further improvement based on the analysis of additional patient data, it may represent an alternative to direct cholangiography in the future.

Evaluation of All-Day-Efficiency for selected flat plate and evacuated tube collectors

NASA Technical Reports Server (NTRS)

1981-01-01

An evaluation of all day efficiency for selected flat plate and evacuated tube collectors is presented. Computations are based on a modified version of the NBSIR 78-1305A procedure for all day efficiency. The ASHMET and NOAA data bases for solar insolation are discussed. Details of the algorithm used to convert total (global) horizontal radiation to the collector tilt plane of the selected sites are given along with tables and graphs which show the results of the tests performed during this evaluation.

Standards-based metadata procedures for retrieving data for display or mining utilizing persistent (data-DOI) identifiers.

PubMed

Harvey, Matthew J; Mason, Nicholas J; McLean, Andrew; Rzepa, Henry S

2015-01-01

We describe three different procedures based on metadata standards for enabling automated retrieval of scientific data from digital repositories utilising the persistent identifier of the dataset with optional specification of the attributes of the data document such as filename or media type. The procedures are demonstrated using the JSmol molecular visualizer as a component of a web page and Avogadro as a stand-alone modelling program. We compare our methods for automated retrieval of data from a standards-compliant data repository with those currently in operation for a selection of existing molecular databases and repositories. Our methods illustrate the importance of adopting a standards-based approach of using metadata declarations to increase access to and discoverability of repository-based data. Graphical abstract.

Office-based surgery: embracing patient safety strategies.

PubMed

Shapiro, Fred E; Punwani, Nathan; Urman, Richard D

2013-01-01

Office-based surgery continues to grow as more procedures are being performed in the outpatient setting. With this exponential growth, there is an increasing emphasis on safe and effective patient care. Current research shows both gaps in safety and opportunities for improvement. Practice managers, clinicians, and other personnel should be cognizant that office procedures are coming under intense regulatory scrutiny. Effective strategies to maintain quality and patient safety include the use of checklists, obtaining office accreditation, encouraging board-certification and proper credentialing of proceduralists, and appropriate patient and procedure selection. There is increasing regulation of ambulatory surgery on state and national levels that will likely affect the financial and care quality aspects of office-based practice. Socioeconomic and political forces will continue to shape the future of office-based surgery.

Evaluation of modal pushover-based scaling of one component of ground motion: Tall buildings

USGS Publications Warehouse

Kalkan, Erol; Chopra, Anil K.

2012-01-01

Nonlinear response history analysis (RHA) is now increasingly used for performance-based seismic design of tall buildings. Required for nonlinear RHAs is a set of ground motions selected and scaled appropriately so that analysis results would be accurate (unbiased) and efficient (having relatively small dispersion). This paper evaluates accuracy and efficiency of recently developed modal pushover–based scaling (MPS) method to scale ground motions for tall buildings. The procedure presented explicitly considers structural strength and is based on the standard intensity measure (IM) of spectral acceleration in a form convenient for evaluating existing structures or proposed designs for new structures. Based on results presented for two actual buildings (19 and 52 stories, respectively), it is demonstrated that the MPS procedure provided a highly accurate estimate of the engineering demand parameters (EDPs), accompanied by significantly reduced record-to-record variability of the responses. In addition, the MPS procedure is shown to be superior to the scaling procedure specified in the ASCE/SEI 7-05 document.

Logistical Consideration in Computer-Based Screening of Astronaut Applicants

NASA Technical Reports Server (NTRS)

Galarza, Laura

2000-01-01

This presentation reviews the logistical, ergonomic, and psychometric issues and data related to the development and operational use of a computer-based system for the psychological screening of astronaut applicants. The Behavioral Health and Performance Group (BHPG) at the Johnson Space Center upgraded its astronaut psychological screening and selection procedures for the 1999 astronaut applicants and subsequent astronaut selection cycles. The questionnaires, tests, and inventories were upgraded from a paper-and-pencil system to a computer-based system. Members of the BHPG and a computer programmer designed and developed needed interfaces (screens, buttons, etc.) and programs for the astronaut psychological assessment system. This intranet-based system included the user-friendly computer-based administration of tests, test scoring, generation of reports, the integration of test administration and test output to a single system, and a complete database for past, present, and future selection data. Upon completion of the system development phase, four beta and usability tests were conducted with the newly developed system. The first three tests included 1 to 3 participants each. The final system test was conducted with 23 participants tested simultaneously. Usability and ergonomic data were collected from the system (beta) test participants and from 1999 astronaut applicants who volunteered the information in exchange for anonymity. Beta and usability test data were analyzed to examine operational, ergonomic, programming, test administration and scoring issues related to computer-based testing. Results showed a preference for computer-based testing over paper-and -pencil procedures. The data also reflected specific ergonomic, usability, psychometric, and logistical concerns that should be taken into account in future selection cycles. Conclusion. Psychological, psychometric, human and logistical factors must be examined and considered carefully when developing and using a computer-based system for psychological screening and selection.

An experimental and theoretical study of reaction mechanisms between nitriles and hydroxylamine.

PubMed

Vörös, Attila; Mucsi, Zoltán; Baán, Zoltán; Timári, Géza; Hermecz, István; Mizsey, Péter; Finta, Zoltán

2014-10-28

The industrially relevant reaction between nitriles and hydroxylamine yielding amidoximes was studied in different molecular solvents and in ionic liquids. In industry, this procedure is carried out on the ton scale in alcohol solutions and the above transformation produces a significant amount of unexpected amide by-product, depending on the nature of the nitrile, which can cause further analytical and purification issues. Although there were earlier attempts to propose mechanisms for this transformation, the real reaction pathway is still under discussion. A new detailed reaction mechanistic explanation, based on theoretical and experimental proof, is given to augment the former mechanisms, which allowed us to find a more efficient, side-product free procedure. Interpreting the theoretical results obtained, it was shown that the application of specific imidazolium, phosphonium and quaternary ammonium based ionic liquids could decrease simultaneously the reaction time while eliminating the amide side-product, leading to the targeted product selectively. This robust and economic procedure now affords a fast, selective amide free synthesis of amidoximes.

The selection of adhesive systems for resin-based luting agents.

PubMed

Carville, Rebecca; Quinn, Frank

2008-01-01

The use of resin-based luting agents is ever expanding with the development of adhesive dentistry. A multitude of different adhesive systems are used with resin-based luting agents, and new products are introduced to the market frequently. Traditional adhesives generally required a multiple step bonding procedure prior to cementing with active resin-based luting materials; however, combined agents offer a simple application procedure. Self-etching 'all-in-one' systems claim that there is no need for the use of a separate adhesive process. The following review addresses the advantages and disadvantages of the available adhesive systems used with resin-based luting agents.

78 FR 52219 - Notice of Acceptance of Renewal Application for Special Nuclear Materials License From Tennessee...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-22

... Order Imposing Procedures for Access to Sensitive Unclassified Non-Safeguards Information for Contention... related to the license renewal application using any of the following methods: Federal Rulemaking Web site..., select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with...

32 CFR Appendix B to Part 231 - In-Store Banking

Code of Federal Regulations, 2013 CFR

2013-07-01

...) MISCELLANEOUS PROCEDURES GOVERNING BANKS, CREDIT UNIONS AND OTHER FINANCIAL INSTITUTIONS ON DOD INSTALLATIONS Pt. 231, App. B Appendix B to Part 231—In-Store Banking A. Selection Process. The purpose of this guidance is to assure an impartial and thorough process to select the best on-base financial institution to...

32 CFR Appendix B to Part 231 - In-Store Banking

Code of Federal Regulations, 2011 CFR

2011-07-01

...) MISCELLANEOUS PROCEDURES GOVERNING BANKS, CREDIT UNIONS AND OTHER FINANCIAL INSTITUTIONS ON DOD INSTALLATIONS Pt. 231, App. B Appendix B to Part 231—In-Store Banking A. Selection Process. The purpose of this guidance is to assure an impartial and thorough process to select the best on-base financial institution to...

32 CFR Appendix B to Part 231 - In-Store Banking

Code of Federal Regulations, 2014 CFR

2014-07-01

...) MISCELLANEOUS PROCEDURES GOVERNING BANKS, CREDIT UNIONS AND OTHER FINANCIAL INSTITUTIONS ON DOD INSTALLATIONS Pt. 231, App. B Appendix B to Part 231—In-Store Banking A. Selection Process. The purpose of this guidance is to assure an impartial and thorough process to select the best on-base financial institution to...

A procedure for selection on marking in hardwoods

Treesearch

George R., Jr. Trimble; Joseph J. Mendel; Richard A. Kennell

1974-01-01

This method of applying individual-tree selection silviculture to hardwood stands combines silvicultural considerations with financial maturity guidelines into a tree-marking system. To develop this system it was necessary to determine rates of return based on 4/4 lumber, for many of the important Appalachian species. Trees were viewed as capital investments that...

48 CFR 36.301 - Use of two-phase design-build selection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contractors. (iv) The suitability of the project for use of the two-phase selection method. (v) The capability... officer determines that this method is appropriate, based on the following: (1) Three or more offers are... been considered: (i) The extent to which the project requirements have been adequately defined. (ii...

A Case Study to Examine Peer Grouping and Aspirant Selection. Professional File. Article 132, Fall 2013

ERIC Educational Resources Information Center

D'Allegro, Mary Lou; Zhou, Kai

2013-01-01

Peer selection based on the similarity of a couple of institutional parameters, by itself, is insufficient. Several other considerations, including clarity of purpose, alignment of institutional information to that purpose, identification of appropriate statistical procedures, review of preliminary peer sets, and the application of additional…

Conditional Covariance-Based Subtest Selection for DIMTEST

ERIC Educational Resources Information Center

Froelich, Amy G.; Habing, Brian

2008-01-01

DIMTEST is a nonparametric hypothesis-testing procedure designed to test the assumptions of a unidimensional and locally independent item response theory model. Several previous Monte Carlo studies have found that using linear factor analysis to select the assessment subtest for DIMTEST results in a moderate to severe loss of power when the exam…

Phage display on the base of filamentous bacteriophages: application for recombinant antibodies selection.

PubMed

Tikunova, N V; Morozova, V V

2009-10-01

The display of peptides and proteins on the surface of filamentous bacteriophage is a powerful methodology for selection of peptides and protein domains, including antibodies. An advantage of this methodology is the direct physical link between the phenotype and the genotype, as an analyzed polypeptide and its encoding DNA fragment exist in one phage particle. Development of phage display antibody libraries provides repertoires of phage particles exposing antibody fragments of great diversity. The biopanning procedure facilitates selection of antibodies with high affinity and specificity for almost any target. This review is an introduction to phage display methodology. It presents recombinant antibodies display in more details:, construction of phage libraries of antibody fragments and different strategies for the biopanning procedure.

45 CFR 1217.4 - Selection procedure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Selection procedure. 1217.4 Section 1217.4 Public... VISTA VOLUNTEER LEADER § 1217.4 Selection procedure. (a) Nomination. Candidates may be nominated in... Director's review. (b) Selection. VISTA volunteer leaders will be selected by the Regional Director (or his...

MIRACAL: A mission radiation calculation program for analysis of lunar and interplanetary missions

NASA Technical Reports Server (NTRS)

Nealy, John E.; Striepe, Scott A.; Simonsen, Lisa C.

1992-01-01

A computational procedure and data base are developed for manned space exploration missions for which estimates are made for the energetic particle fluences encountered and the resulting dose equivalent incurred. The data base includes the following options: statistical or continuum model for ordinary solar proton events, selection of up to six large proton flare spectra, and galactic cosmic ray fluxes for elemental nuclei of charge numbers 1 through 92. The program requires an input trajectory definition information and specifications of optional parameters, which include desired spectral data and nominal shield thickness. The procedure may be implemented as an independent program or as a subroutine in trajectory codes. This code should be most useful in mission optimization and selection studies for which radiation exposure is of special importance.

The multicategory case of the sequential Bayesian pixel selection and estimation procedure

NASA Technical Reports Server (NTRS)

Pore, M. D.; Dennis, T. B. (Principal Investigator)

1980-01-01

A Bayesian technique for stratified proportion estimation and a sampling based on minimizing the mean squared error of this estimator were developed and tested on LANDSAT multispectral scanner data using the beta density function to model the prior distribution in the two-class case. An extention of this procedure to the k-class case is considered. A generalization of the beta function is shown to be a density function for the general case which allows the procedure to be extended.

Development of techniques for producing static strata maps and development of photointerpretive methods based on multitemporal LANDSAT data

NASA Technical Reports Server (NTRS)

Colwell, R. N. (Principal Investigator)

1977-01-01

The results and progress of work conducted in support of the Large Area Crop Inventory Experiment (LACIE) are documented. Research was conducted for two tasks. These tasks include: (1) evaluation of the UCB static stratification procedure and modification of that procedure if warranted; and (2) the development of alternative photointerpretive techniques to the present LACIE procedure for the identification and selection of training areas for machine-processing of LACIE segments.

Automated extraction of temporal motor activity signals from video recordings of neonatal seizures based on adaptive block matching.

PubMed

Karayiannis, Nicolaos B; Sami, Abdul; Frost, James D; Wise, Merrill S; Mizrahi, Eli M

2005-04-01

This paper presents an automated procedure developed to extract quantitative information from video recordings of neonatal seizures in the form of motor activity signals. This procedure relies on optical flow computation to select anatomical sites located on the infants' body parts. Motor activity signals are extracted by tracking selected anatomical sites during the seizure using adaptive block matching. A block of pixels is tracked throughout a sequence of frames by searching for the most similar block of pixels in subsequent frames; this search is facilitated by employing various update strategies to account for the changing appearance of the block. The proposed procedure is used to extract temporal motor activity signals from video recordings of neonatal seizures and other events not associated with seizures.

Dexterity optimization by port placement in robot-assisted minimally invasive surgery

NASA Astrophysics Data System (ADS)

Selha, Shaun; Dupont, Pierre; Howe, Robert D.; Torchiana, David F.

2002-02-01

A computer-based algorithm has been developed which uses preoperative images to provide a surgeon with a list of feasible port triplets ranked according to tool dexterity and endoscopic view quality at each surgical site involved in a procedure. A computer simulation allows the surgeon to select from among the proposed port locations. The procedure selected for the development of the system consists of a coronary artery bypass graft (CABG). In this procedure, the interior mammary artery (IMA) is mobilized from the interior chest wall, and one end is attached to the coronary arteries to provide a new blood supply for the heart. Approximately 10-20 cm is dissected free, using blunt dissection and a harmonic scalpel or electrocautery. At present, the port placement system is being evaluated in clinical trials.

Evaluation of Open Access Versus Selected Admission to the Nursing Program in a Community College. AIR 1983 Annual Forum Paper.

ERIC Educational Resources Information Center

Capoor, Madan

A procedure used to select students for a nursing program in a community college was evaluated, and attention was directed to the cost effectiveness of the program and the implications for the community of an open-door policy. The selection criteria were based on high school grades in chemistry and biology; scores on the Aptitude Test for Allied…

Collection, quality control and delivery of ground-based magnetic data during ESA's Swarm mission

NASA Astrophysics Data System (ADS)

Macmillan, Susan; Humphries, Thomas; Flower, Simon; Swan, Anthony

2016-04-01

Ground-based magnetic data are used in a variety of ways when analysing satellite data. Selecting satellite data often involves the use of magnetic disturbance indices derived from ground-based stations and inverting satellite magnetic data for models of fields from various sources often requires ground-based data. Ground-based data can also be valuable independent data for validation purposes. We summarise data collection and quality control procedures in place at the British Geological Survey for global ground-based observatory and repeat station data. Whilst ongoing participation in the ICSU World Data System and INTERMAGNET facilitates this work, additional procedures have been specially developed for the Swarm mission. We describe these in detail.

47 CFR 1.1602 - Designation for random selection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Designation for random selection. 1.1602 Section 1.1602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1602 Designation for random selection...

47 CFR 1.1602 - Designation for random selection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Designation for random selection. 1.1602 Section 1.1602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1602 Designation for random selection...

Motivation of medical students: selection by motivation or motivation by selection.

PubMed

Wouters, Anouk; Croiset, Gerda; Galindo-Garre, Francisca; Kusurkar, Rashmi A

2016-01-29

Medical schools try to implement selection procedures that will allow them to select the most motivated students for their programs. Though there is a general feeling that selection stimulates student motivation, conclusive evidence for this is lacking. The current study aims to use the perspective of Self-determination Theory (SDT) of motivation as a lens to examine how medical students' motivation differs in relation to different selection procedures. The hypotheses were that 1) selected students report higher strength and autonomous motivation than non-selected students, and 2) recently selected students report higher strength and autonomous motivation than non-selected students and students who were selected longer ago. First- (Y1) and fourth-year (Y4) medical students in the six-year regular programme and first-year students in the four-year graduate entry programme (GE) completed questionnaires measuring motivation strength and type (autonomous-AM, controlled-CM). Scores were compared between students admitted based on selection, lottery or top pre-university GPA (top GPA) using ANCOVAs. Selected students' answers on open-ended questions were analysed using inductive thematic analysis to identify reasons for changes in motivation. The response rate was 61.4 % (n = 357). Selected students (Y1, Y4 and GE) reported a significantly higher strength of motivation than non-selected students (Y1 and Y4 lottery and top GPA) (p < 0.01). Recently selected students (Y1 and GE) reported significantly higher strength (p < 0.01) and higher AM (p < 0.01) and CM (p < 0.05) than non-selected students (lottery and top GPA) and Y4 students who were selected three years ago. Students described that being selected enhanced their motivation as they felt autonomous, competent and that they belonged to a special group. These reported reasons are in alignment with the basic psychological needs described by Self-Determination Theory as important in enhancing autonomous motivation. A comprehensive selection procedure, compared to less demanding admission procedures, does not seem to yield a student population which stands out in terms of autonomous motivation. The current findings indicate that selection might temporarily enhance students' motivation. The mechanism through which this occurs seems to be through feelings of autonomy, competence and relatedness inspired by selection.

Personal profile of medical students selected through a knowledge-based exam only: are we missing suitable students?

PubMed Central

Abbiati, Milena; Baroffio, Anne; Gerbase, Margaret W.

2016-01-01

Introduction A consistent body of literature highlights the importance of a broader approach to select medical school candidates both assessing cognitive capacity and individual characteristics. However, selection in a great number of medical schools worldwide is still based on knowledge exams, a procedure that might neglect students with needed personal characteristics for future medical practice. We investigated whether the personal profile of students selected through a knowledge-based exam differed from those not selected. Methods Students applying for medical school (N=311) completed questionnaires assessing motivations for becoming a doctor, learning approaches, personality traits, empathy, and coping styles. Selection was based on the results of MCQ tests. Principal component analysis was used to draw a profile of the students. Differences between selected and non-selected students were examined by Multivariate ANOVAs, and their impact on selection by logistic regression analysis. Results Students demonstrating a profile of diligence with higher conscientiousness, deep learning approach, and task-focused coping were more frequently selected (p=0.01). Other personal characteristics such as motivation, sociability, and empathy did not significantly differ, comparing selected and non-selected students. Conclusion Selection through a knowledge-based exam privileged diligent students. It did neither advantage nor preclude candidates with a more humane profile. PMID:27079886

Office-based Management of Recurrent Respiratory Papilloma.

PubMed

Motz, Kevin M; Hillel, Alexander T

2016-06-01

This review will highlight the indications and benefits of office-based therapy for recurrent respiratory papillomatosis (RRP) and discuss the utilization of photo-dynamic lasers and adjuvant medical therapy in office-based settings. Office-based management of RRP allows for more timely interventions, is preferred by the majority of patients, and negates the risk of general anesthesia. Current literature argues for the utilization of KTP laser over CO 2 laser for office-based treatment of RRP. Medical therapies for RRP are limited, but agents such as bevacizumab are promising and have been shown to reduce disease burden. Medical therapies that can induce disease remission are still needed. Office-based procedures save time and healthcare expenses compared to like procedures in the operating room. However, the increased frequency for office-based procedures predicts similar overall healthcare costs for office-based and OR laser excision of RRP. Office-based management of RRP is a feasible and well-tolerated strategy in appropriately selected patients with adequate local anesthesia.

A two-phased fuzzy decision making procedure for IT supplier selection

NASA Astrophysics Data System (ADS)

Shohaimay, Fairuz; Ramli, Nazirah; Mohamed, Siti Rosiah; Mohd, Ainun Hafizah

2013-09-01

In many studies on fuzzy decision making, linguistic terms are usually represented by corresponding fixed triangular or trapezoidal fuzzy numbers. However, the fixed fuzzy numbers used in decision making process may not explain the actual respondents' opinions. Hence, a two-phased fuzzy decision making procedure is proposed. First, triangular fuzzy numbers were built based on respondents' opinions on the appropriate range (0-100) for each seven-scale linguistic terms. Then, the fuzzy numbers were integrated into fuzzy decision making model. The applicability of the proposed method is demonstrated in a case study of supplier selection in Information Technology (IT) department. The results produced via the developed fuzzy numbers were consistent with the results obtained using fixed fuzzy numbers. However, with different set of fuzzy numbers based on respondents, there is a difference in the ranking of suppliers based on criterion X1 (background of supplier). Hopefully the proposed model which incorporates fuzzy numbers based on respondents will provide a more significant meaning towards future decision making.

An affine projection algorithm using grouping selection of input vectors

NASA Astrophysics Data System (ADS)

Shin, JaeWook; Kong, NamWoong; Park, PooGyeon

2011-10-01

This paper present an affine projection algorithm (APA) using grouping selection of input vectors. To improve the performance of conventional APA, the proposed algorithm adjusts the number of the input vectors using two procedures: grouping procedure and selection procedure. In grouping procedure, the some input vectors that have overlapping information for update is grouped using normalized inner product. Then, few input vectors that have enough information for for coefficient update is selected using steady-state mean square error (MSE) in selection procedure. Finally, the filter coefficients update using selected input vectors. The experimental results show that the proposed algorithm has small steady-state estimation errors comparing with the existing algorithms.

[Conservative therapy of cartilage defects of the upper ankle joint].

PubMed

Smolenski, U C; Best, N; Bocker, B

2008-03-01

Cartilage defects of the upper ankle joint reflect the problem that great force is transmitted and balanced out over a relatively small surface area. As a pathophysiological factor, cartilage-bone contusions play a significant role in the development of cartilage defects of the upper ankle joint. Physiotherapeutic procedures belong to the standard procedures of conservative therapy. The use and selection of the type of therapy is based on empirical considerations and experience and investigations on effectiveness of particular therapies are relatively rare. At present a symptom-oriented therapy of cartilage defects of the upper ankle joint seems to be the most sensible approach. It can be assumed that it makes sense that the symptomatic treatment of cartilage defects or initial stages of arthritis also includes the subsequent symptoms of pain, irritated condition and limited function. This leads to starting points for physiotherapy with respect to pain therapy, optimisation of pressure relationships, avoidance of pressure points, improvement of diffusion and pressure release. In addition to the differential physiotherapeutic findings, the determination of a curative, preventive or rehabilitative procedure is especially important. In physical therapy special importance is placed on a scheduled serial application corresponding to the findings, employing the necessary methods, such as physiotherapy, sport therapy, medical mechanics, manual therapy, massage, electrotherapy and warmth therapy. From this the findings-related therapy is proposed as a practical therapy concept: locomotive apparatus pain therapy, optimisation of pressure relationships, improvement of diffusion and decongestion therapy. Therapy options have been selected base on the current literature and are summarised in tabular form. The art of symptomatic therapy of cartilage defects of the upper ankle joint does not lie in the multitude of sometimes speculative procedures, but in the targeted selection of a therapy regime based on the therapeutic goal, a corresponding application dose and serial design.

Consultant selection guidebook : procedures for selecting consultants for FHWA federal-aid projects and state funded projects. [Rev. 2002

DOT National Transportation Integrated Search

2002-01-01

This Guidebook provides an overview of procedures for consultant selection. The local agencies that intend to request federal and state funds for reimbursement of consultant services should follow specific selection and contracting procedures. These ...

47 CFR 1.1604 - Post-selection hearings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Post-selection hearings. 1.1604 Section 1.1604 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1604 Post-selection hearings. (a) Following the random...

47 CFR 1.1603 - Conduct of random selection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Conduct of random selection. 1.1603 Section 1.1603 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1603 Conduct of random selection. The...

47 CFR 1.1603 - Conduct of random selection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Conduct of random selection. 1.1603 Section 1.1603 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1603 Conduct of random selection. The...

47 CFR 1.1604 - Post-selection hearings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Post-selection hearings. 1.1604 Section 1.1604 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1604 Post-selection hearings. (a) Following the random...

Mindfulness-Based Approaches in the Treatment of Disordered Gambling: A Systematic Review and Meta-Analysis

ERIC Educational Resources Information Center

Maynard, Brandy R.; Wilson, Alyssa N.; Labuzienski, Elizabeth; Whiting, Seth W.

2018-01-01

Background and Aims: To examine the effects of mindfulness-based interventions on gambling behavior and symptoms, urges, and financial outcomes. Method: Systematic review and meta-analytic procedures were employed to search, select, code, and analyze studies conducted between 1980 and 2014, assessing the effects of mindfulness-based interventions…

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Two-phase design-build...-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if the contracting officer uses the two-phase design-build selection procedures authorized by 570...

A Study of Reading Comprehension in Older Children Using Selected Korean Bible Translations

ERIC Educational Resources Information Center

Kim, Jae Woo

2014-01-01

Problem: The problem of this study was to determine the difference in Bible comprehension scores among gender-based groups of older children using selected passages from three Bible translations: the Children's Bible, the Easy Bible, and the New Revised Korean Bible. Procedures: A total of 288 older children in three churches (Beautiful Baptist…

29 CFR 37.7 - What specific discriminatory actions based on disability are prohibited by this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... WIA or this part. (g) A recipient, in the selection of contractors, must not use criteria that subject..., licensing, or other arrangements, use standards, procedures, criteria, or administrative methods: (1) That... site or location of facilities, a grant applicant or recipient must not make selections that have any...

Robust Variable Selection with Exponential Squared Loss.

PubMed

Wang, Xueqin; Jiang, Yunlu; Huang, Mian; Zhang, Heping

2013-04-01

Robust variable selection procedures through penalized regression have been gaining increased attention in the literature. They can be used to perform variable selection and are expected to yield robust estimates. However, to the best of our knowledge, the robustness of those penalized regression procedures has not been well characterized. In this paper, we propose a class of penalized robust regression estimators based on exponential squared loss. The motivation for this new procedure is that it enables us to characterize its robustness that has not been done for the existing procedures, while its performance is near optimal and superior to some recently developed methods. Specifically, under defined regularity conditions, our estimators are [Formula: see text] and possess the oracle property. Importantly, we show that our estimators can achieve the highest asymptotic breakdown point of 1/2 and that their influence functions are bounded with respect to the outliers in either the response or the covariate domain. We performed simulation studies to compare our proposed method with some recent methods, using the oracle method as the benchmark. We consider common sources of influential points. Our simulation studies reveal that our proposed method performs similarly to the oracle method in terms of the model error and the positive selection rate even in the presence of influential points. In contrast, other existing procedures have a much lower non-causal selection rate. Furthermore, we re-analyze the Boston Housing Price Dataset and the Plasma Beta-Carotene Level Dataset that are commonly used examples for regression diagnostics of influential points. Our analysis unravels the discrepancies of using our robust method versus the other penalized regression method, underscoring the importance of developing and applying robust penalized regression methods.

Robust Variable Selection with Exponential Squared Loss

PubMed Central

Wang, Xueqin; Jiang, Yunlu; Huang, Mian; Zhang, Heping

2013-01-01

Robust variable selection procedures through penalized regression have been gaining increased attention in the literature. They can be used to perform variable selection and are expected to yield robust estimates. However, to the best of our knowledge, the robustness of those penalized regression procedures has not been well characterized. In this paper, we propose a class of penalized robust regression estimators based on exponential squared loss. The motivation for this new procedure is that it enables us to characterize its robustness that has not been done for the existing procedures, while its performance is near optimal and superior to some recently developed methods. Specifically, under defined regularity conditions, our estimators are n-consistent and possess the oracle property. Importantly, we show that our estimators can achieve the highest asymptotic breakdown point of 1/2 and that their influence functions are bounded with respect to the outliers in either the response or the covariate domain. We performed simulation studies to compare our proposed method with some recent methods, using the oracle method as the benchmark. We consider common sources of influential points. Our simulation studies reveal that our proposed method performs similarly to the oracle method in terms of the model error and the positive selection rate even in the presence of influential points. In contrast, other existing procedures have a much lower non-causal selection rate. Furthermore, we re-analyze the Boston Housing Price Dataset and the Plasma Beta-Carotene Level Dataset that are commonly used examples for regression diagnostics of influential points. Our analysis unravels the discrepancies of using our robust method versus the other penalized regression method, underscoring the importance of developing and applying robust penalized regression methods. PMID:23913996

Determination of optimal ultrasound planes for the initialisation of image registration during endoscopic ultrasound-guided procedures.

PubMed

Bonmati, Ester; Hu, Yipeng; Gibson, Eli; Uribarri, Laura; Keane, Geri; Gurusami, Kurinchi; Davidson, Brian; Pereira, Stephen P; Clarkson, Matthew J; Barratt, Dean C

2018-06-01

Navigation of endoscopic ultrasound (EUS)-guided procedures of the upper gastrointestinal (GI) system can be technically challenging due to the small fields-of-view of ultrasound and optical devices, as well as the anatomical variability and limited number of orienting landmarks during navigation. Co-registration of an EUS device and a pre-procedure 3D image can enhance the ability to navigate. However, the fidelity of this contextual information depends on the accuracy of registration. The purpose of this study was to develop and test the feasibility of a simulation-based planning method for pre-selecting patient-specific EUS-visible anatomical landmark locations to maximise the accuracy and robustness of a feature-based multimodality registration method. A registration approach was adopted in which landmarks are registered to anatomical structures segmented from the pre-procedure volume. The predicted target registration errors (TREs) of EUS-CT registration were estimated using simulated visible anatomical landmarks and a Monte Carlo simulation of landmark localisation error. The optimal planes were selected based on the 90th percentile of TREs, which provide a robust and more accurate EUS-CT registration initialisation. The method was evaluated by comparing the accuracy and robustness of registrations initialised using optimised planes versus non-optimised planes using manually segmented CT images and simulated ([Formula: see text]) or retrospective clinical ([Formula: see text]) EUS landmarks. The results show a lower 90th percentile TRE when registration is initialised using the optimised planes compared with a non-optimised initialisation approach (p value [Formula: see text]). The proposed simulation-based method to find optimised EUS planes and landmarks for EUS-guided procedures may have the potential to improve registration accuracy. Further work will investigate applying the technique in a clinical setting.

Metallophytes for organic synthesis: towards new bio-based selective protection/deprotection procedures.

PubMed

Grison, Claire M; Velati, Alicia; Escande, Vincent; Grison, Claude

2015-04-01

We propose for the first time using metal hyperaccumulating plants for the construction of a repertoire of protection and deprotection conditions in a concept of orthogonal sets. Protection of alcohol, carbonyl, carboxyl, and amino groups are considered. The ecocatalysts derived from metal-rich plants allow selective, mild, eco-friendly, and efficient protection or deprotection reactions. The selectivity is controlled by the choice of the metal, which is hyperaccumulated by the metallophyte.

Evaluation of Bias-Variance Trade-Off for Commonly Used Post-Summarizing Normalization Procedures in Large-Scale Gene Expression Studies

PubMed Central

Qiu, Xing; Hu, Rui; Wu, Zhixin

2014-01-01

Normalization procedures are widely used in high-throughput genomic data analyses to remove various technological noise and variations. They are known to have profound impact to the subsequent gene differential expression analysis. Although there has been some research in evaluating different normalization procedures, few attempts have been made to systematically evaluate the gene detection performances of normalization procedures from the bias-variance trade-off point of view, especially with strong gene differentiation effects and large sample size. In this paper, we conduct a thorough study to evaluate the effects of normalization procedures combined with several commonly used statistical tests and MTPs under different configurations of effect size and sample size. We conduct theoretical evaluation based on a random effect model, as well as simulation and biological data analyses to verify the results. Based on our findings, we provide some practical guidance for selecting a suitable normalization procedure under different scenarios. PMID:24941114

Optimizing winter/snow removal operations in MoDOT St. Louis district : includes outcome based evaluation of operations.

DOT National Transportation Integrated Search

2011-10-01

The objective of this project was to develop fleet location, route decision, material selection, and treatment procedures for winter snow removal operations to improve MoDOTs services and lower costs. This work uses a systematic, heuristic-based o...

40 CFR 86.094-14 - Small-volume manufacturers certification procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... The manufacturer shall select one emission data engine based on the highest fuel feed per stroke... service accumulation time determined by the manufacturer to result in stabilized emissions. The emission...

Robert E. Slaughter Research Award Studies 1975. Research Report. Number 3. Effectiveness of Model Office, Cooperative Office Education, and Office Procedures Courses Based on Employee Satisfaction and Satisfactoriness Eighteen Months after Graduation. [AND] A Study of the Content in Selected Textbooks for the Commonly Offered Basic Business Courses in Secondary Schools.

ERIC Educational Resources Information Center

McLean, Gary N.; Jones, L. Eugene

The two studies which received the 1975 Robert E. Slaughter Research Award in Business and Office Education are summarized in the document. The first paper, entitled "Effectiveness of Model Office, Cooperative Office Education, and Office Procedures Courses Based on Employee Satisfaction and Satisfactoriness Eighteen Months After…

National Hospital Discharge Survey: 2001 annual summary with detailed diagnosis and procedure data.

PubMed

Kozak, Lola Jean; Owings, Maria F; Hall, Margaret J

2004-06-01

This report presents 2001 national estimates and selected trend data on the use of non-Federal short-stay hospitals in the United States. Estimates are provided by selected patient and hospital characteristics, diagnoses, and surgical and nonsurgical procedures performed. Admission source and type, collected for the first time in the 2001 National Hospital Discharge Survey, are shown. The estimates are based on data collected through the National Hospital Discharge Survey (NHDS). The survey has been conducted annually since 1965. In 2001, data were collected for approximately 330,000 discharges. Of the 477 eligible non-Federal short-stay hospitals in the sample, 448 (94 percent) responded to the survey. Estimates of diagnoses and procedures are presented according to International Classification of Diseases, 9th Revision, Clinical Modification (ICD-9-CM) code numbers. Rates are computed with 2001 population estimates based on the 2000 census. The appendix includes a comparison of rates computed with 1990 and 2000 census-based population estimates. An estimated 32.7 million inpatients were discharged from non-Federal short-stay hospitals in 2001. They used 159.4 million days of care and had an average length of stay of 4.9 days. Common first-listed discharge diagnoses included delivery, psychoses, pneumonia, malignant neoplasm, and coronary atherosclerosis. Males had higher rates for procedures such as cardiac catheterization and coronary artery bypass graft, and females had higher rates for procedures such as cholecystectomy and total knee replacement. The rates of all cesarean deliveries, primary and repeat, rose from 1995 to 2001; the rate of vaginal birth after cesarean delivery dropped 37 percent during this period.

MnDOT thin whitetopping selection procedures : final report.

DOT National Transportation Integrated Search

2017-06-01

This report provides an integrated selection procedure for evaluating whether an existing hot-mix asphalt (HMA) pavement is an appropriate candidate for a bonded concrete overlay of asphalt (BCOA). The selection procedure includes (1) a desk review, ...

Differential prioritization between relevance and redundancy in correlation-based feature selection techniques for multiclass gene expression data.

PubMed

Ooi, Chia Huey; Chetty, Madhu; Teng, Shyh Wei

2006-06-23

Due to the large number of genes in a typical microarray dataset, feature selection looks set to play an important role in reducing noise and computational cost in gene expression-based tissue classification while improving accuracy at the same time. Surprisingly, this does not appear to be the case for all multiclass microarray datasets. The reason is that many feature selection techniques applied on microarray datasets are either rank-based and hence do not take into account correlations between genes, or are wrapper-based, which require high computational cost, and often yield difficult-to-reproduce results. In studies where correlations between genes are considered, attempts to establish the merit of the proposed techniques are hampered by evaluation procedures which are less than meticulous, resulting in overly optimistic estimates of accuracy. We present two realistically evaluated correlation-based feature selection techniques which incorporate, in addition to the two existing criteria involved in forming a predictor set (relevance and redundancy), a third criterion called the degree of differential prioritization (DDP). DDP functions as a parameter to strike the balance between relevance and redundancy, providing our techniques with the novel ability to differentially prioritize the optimization of relevance against redundancy (and vice versa). This ability proves useful in producing optimal classification accuracy while using reasonably small predictor set sizes for nine well-known multiclass microarray datasets. For multiclass microarray datasets, especially the GCM and NCI60 datasets, DDP enables our filter-based techniques to produce accuracies better than those reported in previous studies which employed similarly realistic evaluation procedures.

41 CFR 60-3.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2013 CFR

2013-07-01

...: Relationship between use of selection procedures and discrimination. 60-3.3 Section 60-3.3 Public Contracts and... PROGRAMS, EQUAL EMPLOYMENT OPPORTUNITY, DEPARTMENT OF LABOR 3-UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 60-3.3 Discrimination defined: Relationship between use of selection...

Validation of a Video-based Game-Understanding Test Procedure in Badminton.

ERIC Educational Resources Information Center

Blomqvist, Minna T.; Luhtanen, Pekka; Laakso, Lauri; Keskinen, Esko

2000-01-01

Reports the development and validation of video-based game-understanding tests in badminton for elementary and secondary students. The tests included different sequences that simulated actual game situations. Players had to solve tactical problems by selecting appropriate solutions and arguments for their decisions. Results suggest that the test…

Competency-Based Adult Education: A Guide to Classroom Management.

ERIC Educational Resources Information Center

Guglielmino, Lucy M.; And Others

Developed as part of a 310 Special Demonstration and Teacher Training Project undertaken at Brevard Community College in 1984-85, this training guide for new Competency-Based Adult Education (CBAE) teachers offers information on the CBAE concept, individualized instruction, selection of instructional materials, student orientation, and procedures.…

Stratified and Maximum Information Item Selection Procedures in Computer Adaptive Testing

ERIC Educational Resources Information Center

Deng, Hui; Ansley, Timothy; Chang, Hua-Hua

2010-01-01

In this study we evaluated and compared three item selection procedures: the maximum Fisher information procedure (F), the a-stratified multistage computer adaptive testing (CAT) (STR), and a refined stratification procedure that allows more items to be selected from the high a strata and fewer items from the low a strata (USTR), along with…

Synthesising Evidence on the Impacts of Programmes and Policies in Education, Crime and Justice, and Social Welfare: Practical Recommendations Based on 14 Test-Bed Reviews

ERIC Educational Resources Information Center

Cottingham, Phoebe; Maynard, Rebecca; Stagner, Matthew

2004-01-01

Review teams tested the systematic review procedures and principles developed under the Campbell Collaboration Fourteen review teams selected topics for intervention reviews in social policy, education, and criminal justice. Review protocols gave criteria for the extensive research literature search. Randomised Controlled Trials were selected.…

The state agency experience (evaluation/selection of hardware for automated, geo-based information systems)

NASA Technical Reports Server (NTRS)

Campbell, L. F., Jr.

1981-01-01

The purpose and format of a panel session that addressed the procedures by which the hardware components of geographic information systems are evaluated and selected are described. State agencies from Alaska, Colorado, Montana, and Washington were represented and the topic was discussed within the general context of information requirements in land management decision making.

Adaptive graph-based multiple testing procedures

PubMed Central

Klinglmueller, Florian; Posch, Martin; Koenig, Franz

2016-01-01

Multiple testing procedures defined by directed, weighted graphs have recently been proposed as an intuitive visual tool for constructing multiple testing strategies that reflect the often complex contextual relations between hypotheses in clinical trials. Many well-known sequentially rejective tests, such as (parallel) gatekeeping tests or hierarchical testing procedures are special cases of the graph based tests. We generalize these graph-based multiple testing procedures to adaptive trial designs with an interim analysis. These designs permit mid-trial design modifications based on unblinded interim data as well as external information, while providing strong family wise error rate control. To maintain the familywise error rate, it is not required to prespecify the adaption rule in detail. Because the adaptive test does not require knowledge of the multivariate distribution of test statistics, it is applicable in a wide range of scenarios including trials with multiple treatment comparisons, endpoints or subgroups, or combinations thereof. Examples of adaptations are dropping of treatment arms, selection of subpopulations, and sample size reassessment. If, in the interim analysis, it is decided to continue the trial as planned, the adaptive test reduces to the originally planned multiple testing procedure. Only if adaptations are actually implemented, an adjusted test needs to be applied. The procedure is illustrated with a case study and its operating characteristics are investigated by simulations. PMID:25319733

41 CFR 60-3.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... employment or membership opportunities of members of any race, sex, or ethnic group will be considered to be... selection procedures and suitable alternative methods of using the selection procedure which have as little...

41 CFR 60-3.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... employment or membership opportunities of members of any race, sex, or ethnic group will be considered to be... selection procedures and suitable alternative methods of using the selection procedure which have as little...

41 CFR 60-3.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... employment or membership opportunities of members of any race, sex, or ethnic group will be considered to be... selection procedures and suitable alternative methods of using the selection procedure which have as little...

41 CFR 60-3.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... employment or membership opportunities of members of any race, sex, or ethnic group will be considered to be... selection procedures and suitable alternative methods of using the selection procedure which have as little...

An Empirical Comparison of Selected Two-Sample Hypothesis Testing Procedures Which Are Locally Most Powerful Under Certain Conditions.

ERIC Educational Resources Information Center

Hoover, H. D.; Plake, Barbara

The relative power of the Mann-Whitney statistic, the t-statistic, the median test, a test based on exceedances (A,B), and two special cases of (A,B) the Tukey quick test and the revised Tukey quick test, was investigated via a Monte Carlo experiment. These procedures were compared across four population probability models: uniform, beta, normal,…

Subset Selection Procedures: A Review and an Assessment

DTIC Science & Technology

1984-02-01

distance function (Alam and Rizvi, 1966; Gupta, 1966; Gupta and Studden, 1970), generalized variance ( Gnanadesikan and Gupta, 1970), and multiple... Gnanadesikan (1966) considered a location type procedure based on sample component means. Except in the case of bivariate normal, only a lower bound of the...Frischtak, 1973; Gnanadesikan , 1966) for ranking multivariate normal populations but the results in these cases are very limited in scope or are asymptotic

Surgical management of Chiari I malformation based on different cerebrospinal fluid flow patterns at the cranial-vertebral junction.

PubMed

Fan, Tao; Zhao, HaiJun; Zhao, XinGang; Liang, Cong; Wang, YinQian; Gai, QiFei

2017-10-01

Chiari I malformation has been shown to present different cerebrospinal fluid (CSF) flow patterns at the cranial-vertebral junction (CVJ). Posterior fossa decompression is the first-line treatment for symptomatic Chiari I malformation. However, there is still controversy on the indication and selection of decompression procedures. This research aims to investigate the clinical indications, outcomes, and complications of the decompression procedures as alternative treatments for Chiari I malformation, based on the different CSF flow patterns at the cranial-vertebral junction. In this study, 126 Chiari I malformation patients treated with the two decompression procedures were analyzed. According to the preoperative findings obtained by using cine phase-contrast MRI (cine PC-MRI), the abnormal CSF flow dynamics at the CVJ in Chiari I malformation was classified into three patterns. After a preoperative evaluation and an intraoperative ultrasound after craniectomy, the two procedures were alternatively selected to treat the Chiari I malformation. The indication and selection of the two surgical procedures, as well as their outcomes and complications, are reported in detail in this work. Forty-eight patients underwent subdural decompression (SDD), and 78 received subarachnoid manipulation (SAM). Ninety patients were diagnosed as having Chiari I malformation with a syrinx. Two weeks after the operation, the modified Japanese Orthopedic Association (mJOA) scores increased from the preoperative value of 10.67 ± 1.61 to 12.74 ± 2.01 (P < 0.01). The mean duration of follow-up was 24.8 months; the mJOA scores increased from the postoperative value of 12.74 ± 2.01 to 12.79 ± 1.91 at the end of follow-up (P = 0.48). More complications occurred in the patients who underwent SAM than in those who received SDD (SAM 11 of 78 (9.5%) vs SDD 2 of 48 (3.5%)). The abnormal CSF flow dynamics at the CVJ in Chiari I malformation can be classified into three patterns. A SAM procedure is more feasible in Chiari I malformation (CM1) patients with pattern III CSF flow dynamics, whereas a SDD procedure is more suitable for CM1 patients with pattern I CSF flow dynamics. In CM1 patients with pattern II CSF flow dynamics, an intraoperative ultrasound after craniectomy could play an important role in the selection of an effective decompression procedure.

Determining which phenotypes underlie a pleiotropic signal

PubMed Central

Majumdar, Arunabha; Haldar, Tanushree; Witte, John S.

2016-01-01

Discovering pleiotropic loci is important to understand the biological basis of seemingly distinct phenotypes. Most methods for assessing pleiotropy only test for the overall association between genetic variants and multiple phenotypes. To determine which specific traits are pleiotropic, we evaluate via simulation and application three different strategies. The first is model selection techniques based on the inverse regression of genotype on phenotypes. The second is a subset-based meta-analysis ASSET [Bhattacharjee et al., 2012], which provides an optimal subset of non-null traits. And the third is a modified Benjamini-Hochberg (B-H) procedure of controlling the expected false discovery rate [Benjamini and Hochberg, 1995] in the framework of phenome-wide association study. From our simulations we see that an inverse regression based approach MultiPhen [O’Reilly et al., 2012] is more powerful than ASSET for detecting overall pleiotropic association, except for when all the phenotypes are associated and have genetic effects in the same direction. For determining which specific traits are pleiotropic, the modified B-H procedure performs consistently better than the other two methods. The inverse regression based selection methods perform competitively with the modified B-H procedure only when the phenotypes are weakly correlated. The efficiency of ASSET is observed to lie below and in between the efficiency of the other two methods when the traits are weakly and strongly correlated, respectively. In our application to a large GWAS, we find that the modified B-H procedure also performs well, indicating that this may be an optimal approach for determining the traits underlying a pleiotropic signal. PMID:27238845

Assessing the utility of phase-space-localized basis functions: Exploiting direct product structure and a new basis function selection procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, James, E-mail: 9jhb3@queensu.ca; Carrington, Tucker, E-mail: Tucker.Carrington@queensu.ca

In this paper we show that it is possible to use an iterative eigensolver in conjunction with Halverson and Poirier’s symmetrized Gaussian (SG) basis [T. Halverson and B. Poirier, J. Chem. Phys. 137, 224101 (2012)] to compute accurate vibrational energy levels of molecules with as many as five atoms. This is done, without storing and manipulating large matrices, by solving a regular eigenvalue problem that makes it possible to exploit direct-product structure. These ideas are combined with a new procedure for selecting which basis functions to use. The SG basis we work with is orders of magnitude smaller than themore » basis made by using a classical energy criterion. We find significant convergence errors in previous calculations with SG bases. For sum-of-product Hamiltonians, SG bases large enough to compute accurate levels are orders of magnitude larger than even simple pruned bases composed of products of harmonic oscillator functions.« less

Comparison of a video-based assessment and a multiple stimulus assessment to identify preferred jobs for individuals with significant intellectual disabilities.

PubMed

Horrocks, Erin L; Morgan, Robert L

2009-01-01

The authors compare two methods of identifying job preferences for individuals with significant intellectual disabilities. Three individuals with intellectual disabilities between the ages of 19 and 21 participated in a video-based preference assessment and a multiple stimulus without replacement (MSWO) assessment. Stimulus preference assessment procedures typically involve giving participants access to the selected stimuli to increase the probability that participants will associate the selected choice with the actual stimuli. Although individuals did not have access to the selected stimuli in the video-based assessment, results indicated that both assessments identified the same highest preference job for all participants. Results are discussed in terms of using a video-based assessment to accurately identify job preferences for individuals with developmental disabilities.

Algorithm for Video Summarization of Bronchoscopy Procedures

PubMed Central

2011-01-01

Background The duration of bronchoscopy examinations varies considerably depending on the diagnostic and therapeutic procedures used. It can last more than 20 minutes if a complex diagnostic work-up is included. With wide access to videobronchoscopy, the whole procedure can be recorded as a video sequence. Common practice relies on an active attitude of the bronchoscopist who initiates the recording process and usually chooses to archive only selected views and sequences. However, it may be important to record the full bronchoscopy procedure as documentation when liability issues are at stake. Furthermore, an automatic recording of the whole procedure enables the bronchoscopist to focus solely on the performed procedures. Video recordings registered during bronchoscopies include a considerable number of frames of poor quality due to blurry or unfocused images. It seems that such frames are unavoidable due to the relatively tight endobronchial space, rapid movements of the respiratory tract due to breathing or coughing, and secretions which occur commonly in the bronchi, especially in patients suffering from pulmonary disorders. Methods The use of recorded bronchoscopy video sequences for diagnostic, reference and educational purposes could be considerably extended with efficient, flexible summarization algorithms. Thus, the authors developed a prototype system to create shortcuts (called summaries or abstracts) of bronchoscopy video recordings. Such a system, based on models described in previously published papers, employs image analysis methods to exclude frames or sequences of limited diagnostic or education value. Results The algorithm for the selection or exclusion of specific frames or shots from video sequences recorded during bronchoscopy procedures is based on several criteria, including automatic detection of "non-informative", frames showing the branching of the airways and frames including pathological lesions. Conclusions The paper focuses on the challenge of generating summaries of bronchoscopy video recordings. PMID:22185344

29 CFR 1606.6 - Selection procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 4 2012-07-01 2012-07-01 false Selection procedures. 1606.6 Section 1606.6 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION GUIDELINES ON DISCRIMINATION... the use of the following selection procedures may be discriminatory on the basis of national origin...

29 CFR 1606.6 - Selection procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 4 2011-07-01 2011-07-01 false Selection procedures. 1606.6 Section 1606.6 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION GUIDELINES ON DISCRIMINATION... the use of the following selection procedures may be discriminatory on the basis of national origin...

29 CFR 1606.6 - Selection procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 4 2014-07-01 2014-07-01 false Selection procedures. 1606.6 Section 1606.6 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION GUIDELINES ON DISCRIMINATION... the use of the following selection procedures may be discriminatory on the basis of national origin...

29 CFR 1606.6 - Selection procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Selection procedures. 1606.6 Section 1606.6 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION GUIDELINES ON DISCRIMINATION... the use of the following selection procedures may be discriminatory on the basis of national origin...

29 CFR 1606.6 - Selection procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false Selection procedures. 1606.6 Section 1606.6 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION GUIDELINES ON DISCRIMINATION... the use of the following selection procedures may be discriminatory on the basis of national origin...

29 CFR 1607.18 - Citations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... SELECTION PROCEDURES (1978) Appendix § 1607.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures... employment practices on grounds of race, color, religion, sex, or national origin. These guidelines have been...

29 CFR 1607.18 - Citations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... SELECTION PROCEDURES (1978) Appendix § 1607.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures... employment practices on grounds of race, color, religion, sex, or national origin. These guidelines have been...

29 CFR 1607.18 - Citations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SELECTION PROCEDURES (1978) Appendix § 1607.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures... employment practices on grounds of race, color, religion, sex, or national origin. These guidelines have been...

29 CFR 1607.18 - Citations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SELECTION PROCEDURES (1978) Appendix § 1607.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures... employment practices on grounds of race, color, religion, sex, or national origin. These guidelines have been...

29 CFR 1607.18 - Citations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... SELECTION PROCEDURES (1978) Appendix § 1607.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures... employment practices on grounds of race, color, religion, sex, or national origin. These guidelines have been...

Development of an automated ultrasonic testing system

NASA Astrophysics Data System (ADS)

Shuxiang, Jiao; Wong, Brian Stephen

2005-04-01

Non-Destructive Testing is necessary in areas where defects in structures emerge over time due to wear and tear and structural integrity is necessary to maintain its usability. However, manual testing results in many limitations: high training cost, long training procedure, and worse, the inconsistent test results. A prime objective of this project is to develop an automatic Non-Destructive testing system for a shaft of the wheel axle of a railway carriage. Various methods, such as the neural network, pattern recognition methods and knowledge-based system are used for the artificial intelligence problem. In this paper, a statistical pattern recognition approach, Classification Tree is applied. Before feature selection, a thorough study on the ultrasonic signals produced was carried out. Based on the analysis of the ultrasonic signals, three signal processing methods were developed to enhance the ultrasonic signals: Cross-Correlation, Zero-Phase filter and Averaging. The target of this step is to reduce the noise and make the signal character more distinguishable. Four features: 1. The Auto Regressive Model Coefficients. 2. Standard Deviation. 3. Pearson Correlation 4. Dispersion Uniformity Degree are selected. And then a Classification Tree is created and applied to recognize the peak positions and amplitudes. Searching local maximum is carried out before feature computing. This procedure reduces much computation time in the real-time testing. Based on this algorithm, a software package called SOFRA was developed to recognize the peaks, calibrate automatically and test a simulated shaft automatically. The automatic calibration procedure and the automatic shaft testing procedure are developed.

A novel tree-based procedure for deciphering the genomic spectrum of clinical disease entities.

PubMed

Mbogning, Cyprien; Perdry, Hervé; Toussile, Wilson; Broët, Philippe

2014-01-01

Dissecting the genomic spectrum of clinical disease entities is a challenging task. Recursive partitioning (or classification trees) methods provide powerful tools for exploring complex interplay among genomic factors, with respect to a main factor, that can reveal hidden genomic patterns. To take confounding variables into account, the partially linear tree-based regression (PLTR) model has been recently published. It combines regression models and tree-based methodology. It is however computationally burdensome and not well suited for situations for which a large number of exploratory variables is expected. We developed a novel procedure that represents an alternative to the original PLTR procedure, and considered different selection criteria. A simulation study with different scenarios has been performed to compare the performances of the proposed procedure to the original PLTR strategy. The proposed procedure with a Bayesian Information Criterion (BIC) achieved good performances to detect the hidden structure as compared to the original procedure. The novel procedure was used for analyzing patterns of copy-number alterations in lung adenocarcinomas, with respect to Kirsten Rat Sarcoma Viral Oncogene Homolog gene (KRAS) mutation status, while controlling for a cohort effect. Results highlight two subgroups of pure or nearly pure wild-type KRAS tumors with particular copy-number alteration patterns. The proposed procedure with a BIC criterion represents a powerful and practical alternative to the original procedure. Our procedure performs well in a general framework and is simple to implement.

Emergency Kausch-Whipple procedure: indications and experiences.

PubMed

Standop, Jens; Glowka, Tim; Schmitz, Volker; Schaefer, Nico; Hirner, Andreas; Kalff, Jörg C

2010-03-01

Pancreaticoduodenectomy is a demanding procedure even in selected patients but becomes formidable when performed in cases of emergency. This study analyzed our experience with urgent pancreatoduodenectomies; special emphases were put on the evaluation of diagnostic means and the validation of existing indications for performance of this procedure. Three hundred one patients who underwent pancreatoduodenectomy between 1989 and 2008 were identified from a pancreatic resection database and reviewed for emergency indications. Six patients (2%) underwent emergency pancreatoduodenectomy. Indications included endoscopy-related perforation, postoperative complications, and uncontrollable intraduodenal tumor bleeding. Length of stay and occurrence of nonsurgical complications were increased in emergency compared with elective pancreatoduodenectomies. Although increased, no significant differences were found regarding mortality and surgery-related complications. Indications for emergency pancreatoduodenectomies were based on clinical decisions rather than on radiologic diagnostics. Urgent pancreatic head resections may be considered as an option in selected patients if handling of local complications by interventional measures or limited surgery seems unsafe.

COAL SULFUR MEASUREMENTS

EPA Science Inventory

The report describes a new technique for sulfur forms analysis based on low-temperature oxygen plasma ashing. The technique involves analyzing the low-temperature plasma ash by modified ASTM techniques after selectively removing the organic material. The procedure has been tested...

Engineering properties of brittle repair materials : summary report.

DOT National Transportation Integrated Search

1992-09-01

Most codes of practice prescribe procedures for selecting patch configuration and materials based on test devised for evaluating new pavement materials. This study is aimed at examining the special consideration to be given to such evaluation procedu...

On Her Majesty's Service

ERIC Educational Resources Information Center

Walker, J. Robert

1972-01-01

Presents a quick overview of British Educational System based upon the author's year of experience in a British Grammar School under Teacher Exchange Program. Significant points to note are: student selection procedures for universities, examination system, and physics teaching. (PS)

Major System Source Evaluation and Selection Procedures.

DTIC Science & Technology

1987-04-02

A-RIBI I" MAJOR SYSTEM SOURCE EVALUATION AND SELECTION PROCEDURES / (U) BUSINESS MANAGEMENT RESEARCH ASSOCIATES INC ARLINGTON VA 02 APR 6? ORMC-5...BRMC-85-5142-1 0 I- MAJOR SYSTEM SOURCE EVALUATION AND SELECTION PROCEDURES o I Business Management Research Associates, Inc. 1911 Jefferson Davis...FORCE SOURCE EVALUATION AND SELECTI ON PROCEDURES Prepared by Business Management Research Associates, Inc., 1911 Jefferson Davis Highway, Arlington

Genetic Interaction Mapping in Schizosaccharomyces pombe Using the Pombe Epistasis Mapper (PEM) System and a ROTOR HDA Colony Replicating Robot in a 1536 Array Format.

PubMed

Roguev, Assen; Xu, Jiewei; Krogan, Nevan

2018-02-01

This protocol describes an optimized high-throughput procedure for generating double deletion mutants in Schizosaccharomyces pombe using the colony replicating robot ROTOR HDA and the PEM (pombe epistasis mapper) system. The method is based on generating high-density colony arrays (1536 colonies per agar plate) and passaging them through a series of antidiploid and mating-type selection (ADS-MTS) and double-mutant selection (DMS) steps. Detailed program parameters for each individual replication step are provided. Using this procedure, batches of 25 or more screens can be routinely performed. © 2018 Cold Spring Harbor Laboratory Press.

Absolute magnitude calibration using trigonometric parallax - Incomplete, spectroscopic samples

NASA Technical Reports Server (NTRS)

Ratnatunga, Kavan U.; Casertano, Stefano

1991-01-01

A new numerical algorithm is used to calibrate the absolute magnitude of spectroscopically selected stars from their observed trigonometric parallax. This procedure, based on maximum-likelihood estimation, can retrieve unbiased estimates of the intrinsic absolute magnitude and its dispersion even from incomplete samples suffering from selection biases in apparent magnitude and color. It can also make full use of low accuracy and negative parallaxes and incorporate censorship on reported parallax values. Accurate error estimates are derived for each of the fitted parameters. The algorithm allows an a posteriori check of whether the fitted model gives a good representation of the observations. The procedure is described in general and applied to both real and simulated data.

Nonlinear Reduced-Order Simulation Using An Experimentally Guided Modal Basis

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Przekop, Adam

2012-01-01

A procedure is developed for using nonlinear experimental response data to guide the modal basis selection in a nonlinear reduced-order simulation. The procedure entails using nonlinear acceleration response data to first identify proper orthogonal modes. Special consideration is given to cases in which some of the desired response data is unavailable. Bases consisting of linear normal modes are then selected to best represent the experimentally determined transverse proper orthogonal modes and either experimentally determined inplane proper orthogonal modes or the special case of numerically computed in-plane companions. The bases are subsequently used in nonlinear modal reduction and dynamic response simulations. The experimental data used in this work is simulated to allow some practical considerations, such as the availability of in-plane response data and non-idealized test conditions, to be explored. Comparisons of the nonlinear reduced-order simulations are made with the surrogate experimental data to demonstrate the effectiveness of the approach.

Selective Osmotic Shock (SOS)-Based Islet Isolation for Microencapsulation.

PubMed

Enck, Kevin; McQuilling, John Patrick; Orlando, Giuseppe; Tamburrini, Riccardo; Sivanandane, Sittadjody; Opara, Emmanuel C

2017-01-01

Islet transplantation (IT) has recently been shown to be a promising alternative to pancreas transplantation for reversing diabetes. IT requires the isolation of the islets from the pancreas, and these islets can be used to fabricate a bio-artificial pancreas. Enzymatic digestion is the current gold standard procedure for islet isolation but has lingering concerns. One such concern is that it has been shown to damage the islets due to nonselective tissue digestion. This chapter provides a detailed description of a nonenzymatic method that we are exploring in our lab as an alternative to current enzymatic digestion procedures for islet isolation from human and nonhuman pancreatic tissues. This method is based on selective destruction and protection of specific cell types and has been shown to leave the extracellular matrix (ECM) of islets intact, which may thus enhance islet viability and functionality. We also show that these SOS-isolated islets can be microencapsulated for transplantation.

On fitting the Pareto Levy distribution to stock market index data: Selecting a suitable cutoff value

NASA Astrophysics Data System (ADS)

Coronel-Brizio, H. F.; Hernández-Montoya, A. R.

2005-08-01

The so-called Pareto-Levy or power-law distribution has been successfully used as a model to describe probabilities associated to extreme variations of stock markets indexes worldwide. The selection of the threshold parameter from empirical data and consequently, the determination of the exponent of the distribution, is often done using a simple graphical method based on a log-log scale, where a power-law probability plot shows a straight line with slope equal to the exponent of the power-law distribution. This procedure can be considered subjective, particularly with regard to the choice of the threshold or cutoff parameter. In this work, a more objective procedure based on a statistical measure of discrepancy between the empirical and the Pareto-Levy distribution is presented. The technique is illustrated for data sets from the New York Stock Exchange (DJIA) and the Mexican Stock Market (IPC).

Simulating soil moisture change in a semiarid rangeland watershed with a process-based water-balance model

Treesearch

Howard Evan Canfield; Vicente L. Lopes

2000-01-01

A process-based, simulation model for evaporation, soil water and streamflow (BROOK903) was used to estimate soil moisture change on a semiarid rangeland watershed in southeastern Arizona. A sensitivity analysis was performed to select parameters affecting ET and soil moisture for calibration. Automatic parameter calibration was performed using a procedure based on a...

Nonsurgical Medical Penile Girth Augmentation: Experience-Based Recommendations.

PubMed

Oates, Jayson; Sharp, Gemma

2017-10-01

Penile augmentation is increasingly sought by men who are dissatisfied with the size and/or appearance of their penis. However, augmentation procedures are still considered to be highly controversial with no standardized recommendations reported in the medical literature and limited outcome data. Nevertheless, these procedures continue to be performed in increasing numbers in private settings. Therefore, there is a need for safe, effective, and minimally invasive procedures to be developed, evaluated, and reported in the research literature. In this article, we focus particularly on girth enhancement procedures rather than lengthening procedures as penile girth appears to be particularly important for sexual satisfaction. We discuss the advantages and disadvantages of the common techniques to date, with a focus on the minimally invasive injectable girth augmentation techniques. Based on considerable operative experience, we offer our own suggestions for patient screening, technique selection, and perioperative care. © 2017 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

41 CFR 60-3.18 - Citations.

Code of Federal Regulations, 2014 CFR

2014-07-01

...-UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) Appendix to Part 60-3 § 60-3.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures (1978) are intended to establish a uniform Federal...

41 CFR 60-3.18 - Citations.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) Appendix to Part 60-3 § 60-3.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures (1978) are intended to establish a uniform Federal...

41 CFR 60-3.18 - Citations.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) Appendix to Part 60-3 § 60-3.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures (1978) are intended to establish a uniform Federal...

41 CFR 60-3.18 - Citations.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) Appendix to Part 60-3 § 60-3.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures (1978) are intended to establish a uniform Federal...

41 CFR 60-3.18 - Citations.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) Appendix to Part 60-3 § 60-3.18 Citations. The official title of these guidelines is “Uniform Guidelines on Employee Selection Procedures (1978)”. The Uniform Guidelines on Employee Selection Procedures (1978) are intended to establish a uniform Federal...

Meta-Analysis of Inquiry-Based Instruction Research

NASA Astrophysics Data System (ADS)

Hasanah, N.; Prasetyo, A. P. B.; Rudyatmi, E.

2017-04-01

Inquiry-based instruction in biology has been the focus of educational research conducted by Unnes biology department students in collaboration with their university supervisors. This study aimed to describe the methodological aspects, inquiry teaching methods critically, and to analyse the results claims, of the selected four student research reports, grounded in inquiry, based on the database of Unnes biology department 2014. Four experimental quantitative research of 16 were selected as research objects by purposive sampling technique. Data collected through documentation study was qualitatively analysed regarding methods used, quality of inquiry syntax, and finding claims. Findings showed that the student research was still the lack of relevant aspects of research methodology, namely in appropriate sampling procedures, limited validity tests of all research instruments, and the limited parametric statistic (t-test) not supported previously by data normality tests. Their consistent inquiry syntax supported the four mini-thesis claims that inquiry-based teaching influenced their dependent variables significantly. In other words, the findings indicated that positive claims of the research results were not fully supported by good research methods, and well-defined inquiry procedures implementation.

A Comparison of Item Selection Procedures Using Different Ability Estimation Methods in Computerized Adaptive Testing Based on the Generalized Partial Credit Model

ERIC Educational Resources Information Center

Ho, Tsung-Han

2010-01-01

Computerized adaptive testing (CAT) provides a highly efficient alternative to the paper-and-pencil test. By selecting items that match examinees' ability levels, CAT not only can shorten test length and administration time but it can also increase measurement precision and reduce measurement error. In CAT, maximum information (MI) is the most…

Complications of Minimally Invasive Cosmetic Procedures: Prevention and Management

PubMed Central

Levy, Lauren L; Emer, Jason J

2012-01-01

Over the past decade, facial rejuvenation procedures to circumvent traditional surgery have become increasingly popular. Office-based, minimally invasive procedures can promote a youthful appearance with minimal downtime and low risk of complications. Injectable botulinum toxin (BoNT), soft-tissue fillers, and chemical peels are among the most popular non-invasive rejuvenation procedures, and each has unique applications for improving facial aesthetics. Despite the simplicity and reliability of office-based procedures, complications can occur even with an astute and experienced injector. The goal of any procedure is to perform it properly and safely; thus, early recognition of complications when they do occur is paramount in dictating prevention of long-term sequelae. The most common complications from BoNT and soft-tissue filler injection are bruising, erythema and pain. With chemical peels, it is not uncommon to have erythema, irritation and burning. Fortunately, these side effects are normally transient and have simple remedies. More serious complications include muscle paralysis from BoNT, granuloma formation from soft-tissue filler placement and scarring from chemical peels. Thankfully, these complications are rare and can be avoided with excellent procedure technique, knowledge of facial anatomy, proper patient selection, and appropriate pre- and post-skin care. This article reviews complications of office-based, minimally invasive procedures, with emphasis on prevention and management. Practitioners providing these treatments should be well versed in this subject matter in order to deliver the highest quality care. PMID:23060707

Resampling procedures to identify important SNPs using a consensus approach.

PubMed

Pardy, Christopher; Motyer, Allan; Wilson, Susan

2011-11-29

Our goal is to identify common single-nucleotide polymorphisms (SNPs) (minor allele frequency > 1%) that add predictive accuracy above that gained by knowledge of easily measured clinical variables. We take an algorithmic approach to predict each phenotypic variable using a combination of phenotypic and genotypic predictors. We perform our procedure on the first simulated replicate and then validate against the others. Our procedure performs well when predicting Q1 but is less successful for the other outcomes. We use resampling procedures where possible to guard against false positives and to improve generalizability. The approach is based on finding a consensus regarding important SNPs by applying random forests and the least absolute shrinkage and selection operator (LASSO) on multiple subsamples. Random forests are used first to discard unimportant predictors, narrowing our focus to roughly 100 important SNPs. A cross-validation LASSO is then used to further select variables. We combine these procedures to guarantee that cross-validation can be used to choose a shrinkage parameter for the LASSO. If the clinical variables were unavailable, this prefiltering step would be essential. We perform the SNP-based analyses simultaneously rather than one at a time to estimate SNP effects in the presence of other causal variants. We analyzed the first simulated replicate of Genetic Analysis Workshop 17 without knowledge of the true model. Post-conference knowledge of the simulation parameters allowed us to investigate the limitations of our approach. We found that many of the false positives we identified were substantially correlated with genuine causal SNPs.

Fermentation process tracking through enhanced spectral calibration modeling.

PubMed

Triadaphillou, Sophia; Martin, Elaine; Montague, Gary; Norden, Alison; Jeffkins, Paul; Stimpson, Sarah

2007-06-15

The FDA process analytical technology (PAT) initiative will materialize in a significant increase in the number of installations of spectroscopic instrumentation. However, to attain the greatest benefit from the data generated, there is a need for calibration procedures that extract the maximum information content. For example, in fermentation processes, the interpretation of the resulting spectra is challenging as a consequence of the large number of wavelengths recorded, the underlying correlation structure that is evident between the wavelengths and the impact of the measurement environment. Approaches to the development of calibration models have been based on the application of partial least squares (PLS) either to the full spectral signature or to a subset of wavelengths. This paper presents a new approach to calibration modeling that combines a wavelength selection procedure, spectral window selection (SWS), where windows of wavelengths are automatically selected which are subsequently used as the basis of the calibration model. However, due to the non-uniqueness of the windows selected when the algorithm is executed repeatedly, multiple models are constructed and these are then combined using stacking thereby increasing the robustness of the final calibration model. The methodology is applied to data generated during the monitoring of broth concentrations in an industrial fermentation process from on-line near-infrared (NIR) and mid-infrared (MIR) spectrometers. It is shown that the proposed calibration modeling procedure outperforms traditional calibration procedures, as well as enabling the identification of the critical regions of the spectra with regard to the fermentation process.

Adjusted peak-flow frequency estimates for selected streamflow-gaging stations in or near Montana based on data through water year 2011: Chapter D in Montana StreamStats

USGS Publications Warehouse

Sando, Steven K.; Sando, Roy; McCarthy, Peter M.; Dutton, DeAnn M.

2016-04-05

The climatic conditions of the specific time period during which peak-flow data were collected at a given streamflow-gaging station (hereinafter referred to as gaging station) can substantially affect how well the peak-flow frequency (hereinafter referred to as frequency) results represent long-term hydrologic conditions. Differences in the timing of the periods of record can result in substantial inconsistencies in frequency estimates for hydrologically similar gaging stations. Potential for inconsistency increases with decreasing peak-flow record length. The representativeness of the frequency estimates for a short-term gaging station can be adjusted by various methods including weighting the at-site results in association with frequency estimates from regional regression equations (RREs) by using the Weighted Independent Estimates (WIE) program. Also, for gaging stations that cannot be adjusted by using the WIE program because of regulation or drainage areas too large for application of RREs, frequency estimates might be improved by using record extension procedures, including a mixed-station analysis using the maintenance of variance type I (MOVE.1) procedure. The U.S. Geological Survey, in cooperation with the Montana Department of Transportation and the Montana Department of Natural Resources and Conservation, completed a study to provide adjusted frequency estimates for selected gaging stations through water year 2011.The purpose of Chapter D of this Scientific Investigations Report is to present adjusted frequency estimates for 504 selected streamflow-gaging stations in or near Montana based on data through water year 2011. Estimates of peak-flow magnitudes for the 66.7-, 50-, 42.9-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities are reported. These annual exceedance probabilities correspond to the 1.5-, 2-, 2.33-, 5-, 10-, 25-, 50-, 100-, 200-, and 500-year recurrence intervals, respectively.The at-site frequency estimates were adjusted by weighting with frequency estimates from RREs using the WIE program for 438 selected gaging stations in Montana. These 438 selected gaging stations (1) had periods of record less than or equal to 40 years, (2) represented unregulated or minor regulation conditions, and (3) had drainage areas less than about 2,750 square miles.The weighted-average frequency estimates obtained by weighting with RREs generally are considered to provide improved frequency estimates. In some cases, there are substantial differences among the at-site frequency estimates, the regression-equation frequency estimates, and the weighted-average frequency estimates. In these cases, thoughtful consideration should be applied when selecting the appropriate frequency estimate. Some factors that might be considered when selecting the appropriate frequency estimate include (1) whether the specific gaging station has peak-flow characteristics that distinguish it from most other gaging stations used in developing the RREs for the hydrologic region; and (2) the length of the peak-flow record and the general climatic characteristics during the period when the peak-flow data were collected. For critical structure-design applications, a conservative approach would be to select the higher of the at-site frequency estimate and the weighted-average frequency estimate.The mixed-station MOVE.1 procedure generally was applied in cases where three or more gaging stations were located on the same large river and some of the gaging stations could not be adjusted using the weighted-average method because of regulation or drainage areas too large for application of RREs. The mixed-station MOVE.1 procedure was applied to 66 selected gaging stations on 19 large rivers.The general approach for using mixed-station record extension procedures to adjust at-site frequencies involved (1) determining appropriate base periods for the gaging stations on the large rivers, (2) synthesizing peak-flow data for the gaging stations with incomplete peak-flow records during the base periods by using the mixed-station MOVE.1 procedure, and (3) conducting frequency analysis on the combined recorded and synthesized peak-flow data for each gaging station. Frequency estimates for the combined recorded and synthesized datasets for 66 gaging stations with incomplete peak-flow records during the base periods are presented. The uncertainties in the mixed-station record extension results are difficult to directly quantify; thus, it is important to understand the intended use of the estimated frequencies based on analysis of the combined recorded and synthesized datasets. The estimated frequencies are considered general estimates of frequency relations among gaging stations on the same stream channel that might be expected if the gaging stations had been gaged during the same long-term base period. However, because the mixed-station record extension procedures involve secondary statistical analysis with accompanying errors, the uncertainty of the frequency estimates is larger than would be obtained by collecting systematic records for the same number of years in the base period.

Wide-undermining neck liposuction: tips and tricks for good results.

PubMed

Innocenti, Alessandro; Andretto Amodeo, Chiara; Ciancio, Francesco

2014-08-01

Neck rejuvenation is one of the most sought after procedures in the restoration of the facial contour. Numerous techniques to improve the aesthetic outcome and reduce downtime have been described. In our experience, wide undermining and local anesthesia are key to obtaining good results in selected patients who want a quick recovery. This article presents our experience with liposuction of the neck and proposes some tips and tricks to master wide-undermining neck liposuction. From January 2005 to September 2012, a total of 118 patients (34 males, 84 females) underwent neck liposuction. Patient selection was based mainly on age and neck-aging features. The procedure was performed with the patients under local anesthesia. A wide rhomboid-shaped skin undermining of the submandibular and neck area was performed and a very thin fat layer was preserved. Dressing was applied for 3 days. Improvement of the neck's contour was observed in all patients. Redefinition of the cervicomandibular angle and skin redraping of the cervical area occurred in all cases. No further touch-ups were needed. Edema and ecchymosis resolved in a few days. No major complications were observed. Our results show that wide-undermining neck liposuction performed under local anesthesia is an effective and safe procedure. Patient selection based on age and anatomical features was fundamental to obtain impressive improvement of neck contour. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Comparison of automatic procedures in the selection of peaks over threshold in flood frequency analysis: A Canadian case study in the context of climate change

NASA Astrophysics Data System (ADS)

Durocher, M.; Mostofi Zadeh, S.; Burn, D. H.; Ashkar, F.

2017-12-01

Floods are one of the most costly hazards and frequency analysis of river discharges is an important part of the tools at our disposal to evaluate their inherent risks and to provide an adequate response. In comparison to the common examination of annual streamflow maximums, peaks over threshold (POT) is an interesting alternative that makes better use of the available information by including more than one flood event per year (on average). However, a major challenge is the selection of a satisfactory threshold above which peaks are assumed to respect certain conditions necessary for an adequate estimation of the risk. Additionally, studies have shown that POT is also a valuable approach to investigate the evolution of flood regimes in the context of climate change. Recently, automatic procedures for the selection of the threshold were suggested to guide that important choice, which otherwise rely on graphical tools and expert judgment. Furthermore, having an automatic procedure that is objective allows for quickly repeating the analysis on a large number of samples, which is useful in the context of large databases or for uncertainty analysis based on a resampling approach. This study investigates the impact of considering such procedures in a case study including many sites across Canada. A simulation study is conducted to evaluate the bias and predictive power of the automatic procedures in similar conditions as well as investigating the power of derived nonstationarity tests. The results obtained are also evaluated in the light of expert judgments established in a previous study. Ultimately, this study provides a thorough examination of the considerations that need to be addressed when conducting POT analysis using automatic threshold selection.

Optimal Sensor Selection for Health Monitoring Systems

NASA Technical Reports Server (NTRS)

Santi, L. Michael; Sowers, T. Shane; Aguilar, Robert B.

2005-01-01

Sensor data are the basis for performance and health assessment of most complex systems. Careful selection and implementation of sensors is critical to enable high fidelity system health assessment. A model-based procedure that systematically selects an optimal sensor suite for overall health assessment of a designated host system is described. This procedure, termed the Systematic Sensor Selection Strategy (S4), was developed at NASA John H. Glenn Research Center in order to enhance design phase planning and preparations for in-space propulsion health management systems (HMS). Information and capabilities required to utilize the S4 approach in support of design phase development of robust health diagnostics are outlined. A merit metric that quantifies diagnostic performance and overall risk reduction potential of individual sensor suites is introduced. The conceptual foundation for this merit metric is presented and the algorithmic organization of the S4 optimization process is described. Representative results from S4 analyses of a boost stage rocket engine previously under development as part of NASA's Next Generation Launch Technology (NGLT) program are presented.

Uav and GIS Based Tool for Collection and Propagation of Seeds Material - First Results

NASA Astrophysics Data System (ADS)

Stereńczak, K.; Mroczek, P.; Jastrzębowski, S.; Krok, G.; Lisańczuk, M.; Klisz, M.; Kantorowicz, W.

2016-06-01

Seed management carried out by The State Forests National Forest Holding is an integral part of rational forest management. Seed collection takes place mainly from stands belonging to first category of forest reproductive material, which is the largest seed base in Poland. In smaller amount, seeds are collected in selective objects of highest forest reproductive material category (selected seed stands, seed orchards). The previous estimation methods of seed crop were based on visual assessment of cones in the stands for their harvest. Following the rules of FRM transfer is additional difficulty of rational seed management which limits the possibility of the use of planting material in Poland. Statements concerning forecast of seed crop and monitoring of seed quality is based on annual reports from the State Forest Service. Forest Research Institute is responsible for preparing and publishing above-mentioned statements. A small extent of its automatization and optimization is a large disadvantage of this procedure. In order to make this process more effective web-based GIS application was designed. Its main performance will give a possibility to upload present-day information on seed efficiency, their spatial pattern and availability. Currently this system is under preparation. As a result, the project team will get a possibility to increase participation of seed material collected from selected seed base and to share good practices on this issue in more efficient way. In the future this will make it possible to obtain greater genetic gain of selection strategy. Additionally, first results presented in literature showed possible use of unmanned aerial system/vehicle (UAS/V) for supporting of seed crop forecast procedure.

The Washington experience (evaluation and selection of hardware for automated geo-based information systems)

NASA Technical Reports Server (NTRS)

Harding, R. A.

1981-01-01

A Washington geographic information system is described. The system has thrust from two different angles: the proprietary need for information to support the management of five million acres of thrust lands by the Department of Natural Resources, and the need for data over the entire state because of statewide governmental responsibilities. The data base includes information relevant to agricultural, forest, industrial, business, and community growth with emphasis on assembling information useful in setting intermediate and long-range goals. System selection procedures and system feasibility studies are discussed.

Engineering properties of brittle repair materials : final report : volume I.

DOT National Transportation Integrated Search

1992-09-01

Most codes of practice prescribe procedures for selecting patch configuration and materials based on tests devised for evaluating new pavement materials. This study is aimed at examining the special consideration to be given to such evaluation proced...

Engineering properties of brittle repair materials : final report : volume II.

DOT National Transportation Integrated Search

1992-09-01

Most codes of practice prescribe procedures for selecting patch configuration and materials based on tests devised for evaluating new pavement materials. This study is aimed at examining the special consideration to be given to such evaluation proced...

Applications of remote sensing, volume 3

NASA Technical Reports Server (NTRS)

Landgrebe, D. A. (Principal Investigator)

1977-01-01

The author has identified the following significant results. Of the four change detection techniques (post classification comparison, delta data, spectral/temporal, and layered spectral temporal), the post classification comparison was selected for further development. This was based upon test performances of the four change detection method, straightforwardness of the procedures, and the output products desired. A standardized modified, supervised classification procedure for analyzing the Texas coastal zone data was compiled. This procedure was developed in order that all quadrangles in the study are would be classified using similar analysis techniques to allow for meaningful comparisons and evaluations of the classifications.

Effects of paired-object affordance in search tasks across the adult lifespan.

PubMed

Wulff, Melanie; Stainton, Alexandra; Rotshtein, Pia

2016-06-01

The study investigated the processes underlying the retrieval of action information about functional object pairs, focusing on the contribution of procedural and semantic knowledge. We further assessed whether the retrieval of action knowledge is affected by task demands and age. The contribution of procedural knowledge was examined by the way objects were selected, specifically whether active objects were selected before passive objects. The contribution of semantic knowledge was examined by manipulating the relation between targets and distracters. A touchscreen-based search task was used testing young, middle-aged, and elderly participants. Participants had to select by touching two targets among distracters using two search tasks. In an explicit action search task, participants had to select two objects which afforded a mutual action (e.g., functional pair: hammer-nail). Implicit affordance perception was tested using a visual color-matching search task; participants had to select two objects with the same colored frame. In both tasks, half of the colored targets also afforded an action. Overall, middle-aged participants performed better than young and elderly participants, specifically in the action task. Across participants in the action task, accuracy was increased when the distracters were semantically unrelated to the functional pair, while the opposite pattern was observed in the color task. This effect was enhanced with increased age. In the action task all participants utilized procedural knowledge, i.e., selected the active object before the passive object. This result supports the dual-route account from vision to action. Semantic knowledge contributed to both the action and the color task, but procedural knowledge associated with the direct route was primarily retrieved when the task was action-relevant. Across the adulthood lifespan, the data show inverted U-shaped effects of age on the retrieval of action knowledge. Age also linearly increased the involvement of the indirect (semantic) route and the integration of information of the direct and the indirect routes in selection processes. Copyright © 2016 Elsevier Inc. All rights reserved.

Systematic Sensor Selection Strategy (S4) User Guide

NASA Technical Reports Server (NTRS)

Sowers, T. Shane

2012-01-01

This paper describes a User Guide for the Systematic Sensor Selection Strategy (S4). S4 was developed to optimally select a sensor suite from a larger pool of candidate sensors based on their performance in a diagnostic system. For aerospace systems, selecting the proper sensors is important for ensuring adequate measurement coverage to satisfy operational, maintenance, performance, and system diagnostic criteria. S4 optimizes the selection of sensors based on the system fault diagnostic approach while taking conflicting objectives such as cost, weight and reliability into consideration. S4 can be described as a general architecture structured to accommodate application-specific components and requirements. It performs combinational optimization with a user defined merit or cost function to identify optimum or near-optimum sensor suite solutions. The S4 User Guide describes the sensor selection procedure and presents an example problem using an open source turbofan engine simulation to demonstrate its application.

A function-based approach to cockpit procedure aids

NASA Technical Reports Server (NTRS)

Phatak, Anil V.; Jain, Parveen; Palmer, Everett

1990-01-01

The objective of this research is to develop and test a cockpit procedural aid that can compose and present procedures that are appropriate for the given flight situation. The procedure would indicate the status of the aircraft engineering systems, and the environmental conditions. Prescribed procedures already exist for normal as well as for a number of non-normal and emergency situations, and can be presented to the crew using an interactive cockpit display. However, no procedures are prescribed or recommended for a host of plausible flight situations involving multiple malfunctions compounded by adverse environmental conditions. Under these circumstances, the cockpit procedural aid must review the prescribed procedures for the individual malfunction (when available), evaluate the alternatives or options, and present one or more composite procedures (prioritized or unprioritized) in response to the given situation. A top-down function-based conceptual approach towards composing and presenting cockpit procedures is being investigated. This approach is based upon the thought process that an operating crew must go through while attempting to meet the flight objectives given the current flight situation. In order to accomplish the flight objectives, certain critical functions must be maintained during each phase of the flight, using the appropriate procedures or success paths. The viability of these procedures depends upon the availability of required resources. If resources available are not sufficient to meet the requirements, alternative procedures (success paths) using the available resources must be constructed to maintain the critical functions and the corresponding objectives. If no success path exists that can satisfy the critical functions/objectives, then the next level of critical functions/objectives must be selected and the process repeated. Information is given in viewgraph form.

A PRIM approach to predictive-signature development for patient stratification

PubMed Central

Chen, Gong; Zhong, Hua; Belousov, Anton; Devanarayan, Viswanath

2015-01-01

Patients often respond differently to a treatment because of individual heterogeneity. Failures of clinical trials can be substantially reduced if, prior to an investigational treatment, patients are stratified into responders and nonresponders based on biological or demographic characteristics. These characteristics are captured by a predictive signature. In this paper, we propose a procedure to search for predictive signatures based on the approach of patient rule induction method. Specifically, we discuss selection of a proper objective function for the search, present its algorithm, and describe a resampling scheme that can enhance search performance. Through simulations, we characterize conditions under which the procedure works well. To demonstrate practical uses of the procedure, we apply it to two real-world data sets. We also compare the results with those obtained from a recent regression-based approach, Adaptive Index Models, and discuss their respective advantages. In this study, we focus on oncology applications with survival responses. PMID:25345685

48 CFR 6.102 - Use of competitive procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... procedure (see subpart 36.6 for procedures). (2) Competitive selection of basic and applied research and... nature identifying areas of research interest, including criteria for selecting proposals, and soliciting...

48 CFR 36.301 - Use of two-phase design-build selection procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Use of two-phase design-build selection procedures. 36.301 Section 36.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Two-Phase Design-Build Selection Procedures 36.301...

9 CFR 592.450 - Procedures for selecting appeal samples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Procedures for selecting appeal samples. 592.450 Section 592.450 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.450 Procedures for selecting appeal samples. (a)...

9 CFR 592.450 - Procedures for selecting appeal samples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Procedures for selecting appeal samples. 592.450 Section 592.450 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.450 Procedures for selecting appeal samples. (a)...

9 CFR 592.450 - Procedures for selecting appeal samples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Procedures for selecting appeal samples. 592.450 Section 592.450 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.450 Procedures for selecting appeal samples. (a)...

9 CFR 592.450 - Procedures for selecting appeal samples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Procedures for selecting appeal samples. 592.450 Section 592.450 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.450 Procedures for selecting appeal samples. (a)...

Exact intervals and tests for median when one sample value possibly an outliner

NASA Technical Reports Server (NTRS)

Keller, G. J.; Walsh, J. E.

1973-01-01

Available are independent observations (continuous data) that are believed to be a random sample. Desired are distribution-free confidence intervals and significance tests for the population median. However, there is the possibility that either the smallest or the largest observation is an outlier. Then, use of a procedure for rejection of an outlying observation might seem appropriate. Such a procedure would consider that two alternative situations are possible and would select one of them. Either (1) the n observations are truly a random sample, or (2) an outlier exists and its removal leaves a random sample of size n-1. For either situation, confidence intervals and tests are desired for the median of the population yielding the random sample. Unfortunately, satisfactory rejection procedures of a distribution-free nature do not seem to be available. Moreover, all rejection procedures impose undesirable conditional effects on the observations, and also, can select the wrong one of the two above situations. It is found that two-sided intervals and tests based on two symmetrically located order statistics (not the largest and smallest) of the n observations have this property.

Selecting aesthetic gynecologic procedures for plastic surgeons: a review of target methodology.

PubMed

Ostrzenski, Adam

2013-04-01

The objective of this article was to assist cosmetic-plastic surgeons in selecting aesthetic cosmetic gynecologic-plastic surgical interventions. Target methodological analyses of pertinent evidence-based scientific papers and anecdotal information linked to surgical techniques for cosmetic-plastic female external genitalia were examined. A search of the existing literature from 1900 through June 2011 was performed by utilizing electronic and manual databases. A total of 87 articles related to cosmetic-plastic gynecologic surgeries were identified in peer-review journals. Anecdotal information was identified in three sources (Barwijuk, Obstet Gynecol J 9(3):2178-2179, 2011; Benson, 5th annual congress on aesthetic vaginal surgery, Tucson, AZ, USA, November 14-15, 2010; Scheinberg, Obstet Gynecol J 9(3):2191, 2011). Among those articles on cosmetic-plastic gynecologic surgical technique that were reviewed, three articles met the criteria for evidence-based medicine level II, one article was level II-1 and two papers were level II-2. The remaining papers were classified as level III. The pertinent 25 papers met the inclusion criteria and were analyzed. There was no documentation on the safety and effectiveness of cosmetic-plastic gynecologic procedures in the scientific literature. All published surgical interventions are not suitable for a cosmetic-plastic practice. The absence of documentation on safety and effectiveness related to cosmetic-plastic gynecologic procedures prevents the establishment of a standard of practice. Traditional gynecologic surgical procedures cannot be labeled and used as cosmetic-plastic procedures, it is a deceptive practice. Obtaining legal trademarks on traditional gynecologic procedures and creating a business model that tries to control clinical-scientific knowledge dissemination is unethical. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Application of GIS-based Procedure on Slopeland Use Classification and Identification

NASA Astrophysics Data System (ADS)

KU, L. C.; LI, M. C.

2016-12-01

In Taiwan, the "Slopeland Conservation and Utilization Act" regulates the management of the slopelands. It categorizes the slopeland into land suitable for agricultural or animal husbandry, land suitable for forestry and land for enhanced conservation, according to the environmental factors of average slope, effective soil depth, soil erosion and parental rock. Traditionally, investigations of environmental factors require cost-effective field works. It has been confronted with many practical issues such as non-evaluated cadastral parcels, evaluation results depending on expert's opinion, difficulties in field measurement and judgment, and time consuming. This study aimed to develop a GIS-based procedure involved in the acceleration of slopeland use classification and quality improvement. First, the environmental factors of slopelands were analyzed by GIS and SPSS software. The analysis involved with the digital elevation model (DEM), soil depth map, land use map and satellite images. Second, 5% of the analyzed slopelands were selected to perform the site investigations and correct the results of classification. Finally, a 2nd examination was involved by randomly selected 2% of the analyzed slopelands to perform the accuracy evaluation. It was showed the developed procedure is effective in slopeland use classification and identification. Keywords: Slopeland Use Classification, GIS, Management

Study of gas tungsten arc welding procedures for tantalum alloy T-111 (Ta-8 W-2Hf) plate

NASA Technical Reports Server (NTRS)

Gold, R. E.; Kesterson, R. L.

1973-01-01

Methods of eliminating or reducing underbread cracking in multipass GTA welds in thick T-111 plate were studied. Single V butt welds prepared using experimental filler metal compositions and standard weld procedures resulted in only moderate success in reducing underbread cracking. Subsequent procedural changes incorporating manual welding, slower weld speeds, and three or fewer fill passes resulted in crack-free single V welds only when the filler metal was free of hafnium. The double V joint design with successive fill passes on opposite sides of the joint produced excellent welds. The quality of each weld was determined metallographically since the cracking, when present, was very slight and undetectable using standard NDT techniques. Tensile and bend tests were performed on selected weldments. The inherent filler metal strength and the joint geometry determined the strength of the weldment. Hardness and electron beam microprobe traverses were made on selected specimens with the result that significant filler metal-base metal dilution as well as hafnium segregation was detected. A tentative explanation of T-111 plate underbread cracking is presented based on the intrinsic effects of hafnium in the weldment.

Engineering Guide for Fire Protection and Detection Systems at Army Ammunition Plants. Volume 1. Selection and Design

DTIC Science & Technology

1980-12-01

type of personnel likely to he using them, (3) the physical environment , (4) health and operational safety considerations. Carefully selected portable...operated apparatus must have the battery and energy-limiting components located outside the hazardous environment , and be so constructed that a direct...designate effect on equipment or personnel), based upon the most severe result of personnel error, procedural deficiencies, environment , design

Frameless robotically targeted stereotactic brain biopsy: feasibility, diagnostic yield, and safety.

PubMed

Bekelis, Kimon; Radwan, Tarek A; Desai, Atman; Roberts, David W

2012-05-01

Frameless stereotactic brain biopsy has become an established procedure in many neurosurgical centers worldwide. Robotic modifications of image-guided frameless stereotaxy hold promise for making these procedures safer, more effective, and more efficient. The authors hypothesized that robotic brain biopsy is a safe, accurate procedure, with a high diagnostic yield and a safety profile comparable to other stereotactic biopsy methods. This retrospective study included 41 patients undergoing frameless stereotactic brain biopsy of lesions (mean size 2.9 cm) for diagnostic purposes. All patients underwent image-guided, robotic biopsy in which the SurgiScope system was used in conjunction with scalp fiducial markers and a preoperatively selected target and trajectory. Forty-five procedures, with 50 supratentorial targets selected, were performed. The mean operative time was 44.6 minutes for the robotic biopsy procedures. This decreased over the second half of the study by 37%, from 54.7 to 34.5 minutes (p < 0.025). The diagnostic yield was 97.8% per procedure, with a second procedure being diagnostic in the single nondiagnostic case. Complications included one transient worsening of a preexisting deficit (2%) and another deficit that was permanent (2%). There were no infections. Robotic biopsy involving a preselected target and trajectory is safe, accurate, efficient, and comparable to other procedures employing either frame-based stereotaxy or frameless, nonrobotic stereotaxy. It permits biopsy in all patients, including those with small target lesions. Robotic biopsy planning facilitates careful preoperative study and optimization of needle trajectory to avoid sulcal vessels, bridging veins, and ventricular penetration.

Should Title 24 Ventilation Requirements Be Amended to include an Indoor Air Quality Procedure?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dutton, Spencer M.; Mendell, Mark J.; Chan, Wanyu R.

Minimum outdoor air ventilation rates (VRs) for buildings are specified in standards, including California?s Title 24 standards. The ASHRAE ventilation standard includes two options for mechanically-ventilated buildings ? a prescriptive ventilation rate procedure (VRP) that specifies minimum VRs that vary among occupancy classes, and a performance-based indoor air quality procedure (IAQP) that may result in lower VRs than the VRP, with associated energy savings, if IAQ meeting specified criteria can be demonstrated. The California Energy Commission has been considering the addition of an IAQP to the Title 24 standards. This paper, based on a review of prior data and newmore » analyses of the IAQP, evaluates four future options for Title 24: no IAQP; adding an alternate VRP, adding an equivalent indoor air quality procedure (EIAQP), and adding an improved ASHRAE-like IAQP. Criteria were established for selecting among options, and feedback was obtained in a workshop of stakeholders. Based on this review, the addition of an alternate VRP is recommended. This procedure would allow lower minimum VRs if a specified set of actions were taken to maintain acceptable IAQ. An alternate VRP could also be a valuable supplement to ASHRAE?s ventilation standard.« less

Optimal Artificial Boundary Condition Configurations for Sensitivity-Based Model Updating and Damage Detection

DTIC Science & Technology

2010-09-01

matrix is used in many methods, like Jacobi or Gauss Seidel , for solving linear systems. Also, no partial pivoting is necessary for a strictly column...problems that arise during the procedure, which in general, converges to the solving of a linear system. The most common issue with the solution is the... iterative procedure to find an appropriate subset of parameters that produce an optimal solution commonly known as forward selection. Then, the

Ecological Fallacy in Reading Acquisition Research: Masking Constructive Processes of the Learner.

ERIC Educational Resources Information Center

Berninger, Virginia W.; Abbott, Robert D.

A study examined whether conclusions about constructive processes in reading based on analysis of group data were consistent with those based on an analysis of individual data. Subjects, selected from a larger sample of 45 first grade students who had participated in a longitudinal study on acquisition of linguistic procedures for printed words,…

Field evaluation of Wisconsin modified binder selection guidelines - phase II.

DOT National Transportation Integrated Search

2013-12-01

The purpose of this project was to continue phase I of the study with the objective of identifying promising procedures and applicable modified binder specification criteria for use in Wisconsin, based on comparison of test results to field performan...

Development of local calibration factors and design criteria values for mechanistic-empirical pavement design.

DOT National Transportation Integrated Search

2015-08-01

A mechanistic-empirical (ME) pavement design procedure allows for analyzing and selecting pavement structures based : on predicted distress progression resulting from stresses and strains within the pavement over its design life. The Virginia : Depar...

Automatic motor task selection via a bandit algorithm for a brain-controlled button

NASA Astrophysics Data System (ADS)

Fruitet, Joan; Carpentier, Alexandra; Munos, Rémi; Clerc, Maureen

2013-02-01

Objective. Brain-computer interfaces (BCIs) based on sensorimotor rhythms use a variety of motor tasks, such as imagining moving the right or left hand, the feet or the tongue. Finding the tasks that yield best performance, specifically to each user, is a time-consuming preliminary phase to a BCI experiment. This study presents a new adaptive procedure to automatically select (online) the most promising motor task for an asynchronous brain-controlled button. Approach. We develop for this purpose an adaptive algorithm UCB-classif based on the stochastic bandit theory and design an EEG experiment to test our method. We compare (offline) the adaptive algorithm to a naïve selection strategy which uses uniformly distributed samples from each task. We also run the adaptive algorithm online to fully validate the approach. Main results. By not wasting time on inefficient tasks, and focusing on the most promising ones, this algorithm results in a faster task selection and a more efficient use of the BCI training session. More precisely, the offline analysis reveals that the use of this algorithm can reduce the time needed to select the most appropriate task by almost half without loss in precision, or alternatively, allow us to investigate twice the number of tasks within a similar time span. Online tests confirm that the method leads to an optimal task selection. Significance. This study is the first one to optimize the task selection phase by an adaptive procedure. By increasing the number of tasks that can be tested in a given time span, the proposed method could contribute to reducing ‘BCI illiteracy’.

Parallax-Robust Surveillance Video Stitching

PubMed Central

He, Botao; Yu, Shaohua

2015-01-01

This paper presents a parallax-robust video stitching technique for timely synchronized surveillance video. An efficient two-stage video stitching procedure is proposed in this paper to build wide Field-of-View (FOV) videos for surveillance applications. In the stitching model calculation stage, we develop a layered warping algorithm to align the background scenes, which is location-dependent and turned out to be more robust to parallax than the traditional global projective warping methods. On the selective seam updating stage, we propose a change-detection based optimal seam selection approach to avert ghosting and artifacts caused by moving foregrounds. Experimental results demonstrate that our procedure can efficiently stitch multi-view videos into a wide FOV video output without ghosting and noticeable seams. PMID:26712756

23 CFR 636.202 - When are two-phase design-build selection procedures appropriate?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false When are two-phase design-build selection procedures appropriate? 636.202 Section 636.202 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Selection Procedures, Award Criteria § 636.202 When are two-phase design-build...

Mechanism of degradation of 2'-deoxycytidine by formamide: implications for chemical DNA sequencing procedures.

PubMed

Saladino, R; Crestini, C; Mincione, E; Costanzo, G; Di Mauro, E; Negri, R

1997-11-01

We describe the reaction of formamide with 2'-deoxycytidine to give pyrimidine ring opening by nucleophilic addition on the electrophilic C(6) and C(4) positions. This information is confirmed by the analysis of the products of formamide attack on 2'-deoxycytidine, 5-methyl-2'-deoxycytidine, and 5-bromo-2'-deoxycytidine, residues when the latter are incorporated into oligonucleotides by DNA polymerase-driven polymerization and solid-phase phosphoramidite procedure. The increased sensitivity of 5-bromo-2'-deoxycytidine relative to that of 2'-deoxycytidine is pivotal for the improvement of the one-lane chemical DNA sequencing procedure based on the base-selective reaction of formamide with DNA. In many DNA sequencing cases it will in fact be possible to incorporate this base analogue into the DNA to be sequenced, thus providing a complete discrimination between its UV absorption signal and that of the thymidine residues. The wide spectrum of different sensitivities to formamide displayed by the 2'-deoxycytidine analogues solves, in the DNA single-lane chemical sequencing procedure, the possible source of errors due to low discrimination between C and T residues.

Calculation of nanodrop profile from fluid density distribution.

PubMed

Berim, Gersh O; Ruckenstein, Eli

2016-05-01

Two approaches are examined, which can be used to determine the drop profile from the fluid density distributions (FDDs) obtained on the basis of microscopic theories. For simplicity, only two-dimensional (cylindrical, or axisymmetrical) distributions are examined and it is assumed that the fluid is either in contact with a smooth solid or separated from the smooth solid by a lubricating liquid film. The first approach is based on the sharp-kink interface approximation in which the density of the liquid inside and the density of the vapor outside the drop are constant with the exception of the surface layer of the drop where the density is different from the above ones. In this case, the drop profile was calculated by minimizing the total potential energy of the system. The second approach is based on a nonuniform FDD obtained either by the density functional theory or molecular dynamics simulations. To determine the drop profile from such an FDD, which does not contain sharp interfaces, three procedures can be used. In the first two procedures, P1 and P2, the one-dimensional FDDs along straight lines which are parallel to the surface of the solid are extracted from the two-dimensional FDD. Each of those one-dimensional FDDs has a vapor-liquid interface at which the fluid density changes from vapor-like to liquid-like values. Procedure P1 uses the locations of the equimolar dividing surfaces for the one-dimensional FDDs as points of the drop profile. Procedure P2 is based on the assumption that the fluid density is constant on the surface of the drop, that density being selected either arbitrarily or as a fluid density at the location of the equimolar dividing surface for one of the one-dimensional FDDs employed in procedure P1. In the third procedure, P3, which is suggested for the first time in this paper, the one-dimensional FDDs are taken along the straight lines passing through a selected point inside the drop (radial line). Then, the drop profile is calculated like in procedure P1. It is shown, that procedure P3 provides a drop profile which is more reasonable than the other ones. Relationship of the discussed procedures to those used in image analysis is briefly discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

Surface water risk assessment of pesticides in Ethiopia.

PubMed

Teklu, Berhan M; Adriaanse, Paulien I; Ter Horst, Mechteld M S; Deneer, John W; Van den Brink, Paul J

2015-03-01

Scenarios for future use in the pesticide registration procedure in Ethiopia were designed for 3 separate Ethiopian locations, which are aimed to be protective for the whole of Ethiopia. The scenarios estimate concentrations in surface water resulting from agricultural use of pesticides for a small stream and for two types of small ponds. Seven selected pesticides were selected since they were estimated to bear the highest risk to humans on the basis of volume of use, application rate and acute and chronic human toxicity, assuming exposure as a result of the consumption of surface water. Potential ecotoxicological risks were not considered as a selection criterion at this stage. Estimates of exposure concentrations in surface water were established using modelling software also applied in the EU registration procedure (PRZM and TOXSWA). Input variables included physico-chemical properties, and data such as crop calendars, irrigation schedules, meteorological information and detailed application data which were specifically tailored to the Ethiopian situation. The results indicate that for all the pesticides investigated the acute human risk resulting from the consumption of surface water is low to negligible, whereas agricultural use of chlorothalonil, deltamethrin, endosulfan and malathion in some crops may result in medium to high risk to aquatic species. The predicted environmental concentration estimates are based on procedures similar to procedures used at the EU level and in the USA. Addition of aquatic macrophytes as an ecotoxicological endpoint may constitute a welcome future addition to the risk assessment procedure. Implementation of the methods used for risk characterization constitutes a good step forward in the pesticide registration procedure in Ethiopia. Copyright © 2014 Elsevier B.V. All rights reserved.

Variable selection in discrete survival models including heterogeneity.

PubMed

Groll, Andreas; Tutz, Gerhard

2017-04-01

Several variable selection procedures are available for continuous time-to-event data. However, if time is measured in a discrete way and therefore many ties occur models for continuous time are inadequate. We propose penalized likelihood methods that perform efficient variable selection in discrete survival modeling with explicit modeling of the heterogeneity in the population. The method is based on a combination of ridge and lasso type penalties that are tailored to the case of discrete survival. The performance is studied in simulation studies and an application to the birth of the first child.

On spatial mutation-selection models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kondratiev, Yuri, E-mail: kondrat@math.uni-bielefeld.de; Kutoviy, Oleksandr, E-mail: kutoviy@math.uni-bielefeld.de, E-mail: kutovyi@mit.edu; Department of Mathematics, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139

2013-11-15

We discuss the selection procedure in the framework of mutation models. We study the regulation for stochastically developing systems based on a transformation of the initial Markov process which includes a cost functional. The transformation of initial Markov process by cost functional has an analytic realization in terms of a Kimura-Maruyama type equation for the time evolution of states or in terms of the corresponding Feynman-Kac formula on the path space. The state evolution of the system including the limiting behavior is studied for two types of mutation-selection models.

Dual-wavelength phase-shifting digital holography selectively extracting wavelength information from wavelength-multiplexed holograms.

PubMed

Tahara, Tatsuki; Mori, Ryota; Kikunaga, Shuhei; Arai, Yasuhiko; Takaki, Yasuhiro

2015-06-15

Dual-wavelength phase-shifting digital holography that selectively extracts wavelength information from five wavelength-multiplexed holograms is presented. Specific phase shifts for respective wavelengths are introduced to remove the crosstalk components and extract only the object wave at the desired wavelength from the holograms. Object waves in multiple wavelengths are selectively extracted by utilizing 2π ambiguity and the subtraction procedures based on phase-shifting interferometry. Numerical results show the validity of the proposed technique. The proposed technique is also experimentally demonstrated.

Engineering A-kinase Anchoring Protein (AKAP)-selective Regulatory Subunits of Protein Kinase A (PKA) through Structure-based Phage Selection*

PubMed Central

Gold, Matthew G.; Fowler, Douglas M.; Means, Christopher K.; Pawson, Catherine T.; Stephany, Jason J.; Langeberg, Lorene K.; Fields, Stanley; Scott, John D.

2013-01-01

PKA is retained within distinct subcellular environments by the association of its regulatory type II (RII) subunits with A-kinase anchoring proteins (AKAPs). Conventional reagents that universally disrupt PKA anchoring are patterned after a conserved AKAP motif. We introduce a phage selection procedure that exploits high-resolution structural information to engineer RII mutants that are selective for a particular AKAP. Selective RII (RSelect) sequences were obtained for eight AKAPs following competitive selection screening. Biochemical and cell-based experiments validated the efficacy of RSelect proteins for AKAP2 and AKAP18. These engineered proteins represent a new class of reagents that can be used to dissect the contributions of different AKAP-targeted pools of PKA. Molecular modeling and high-throughput sequencing analyses revealed the molecular basis of AKAP-selective interactions and shed new light on native RII-AKAP interactions. We propose that this structure-directed evolution strategy might be generally applicable for the investigation of other protein interaction surfaces. PMID:23625929

Conduct of a personal radiofrequency electromagnetic field measurement study: proposed study protocol.

PubMed

Röösli, Martin; Frei, Patrizia; Bolte, John; Neubauer, Georg; Cardis, Elisabeth; Feychting, Maria; Gajsek, Peter; Heinrich, Sabine; Joseph, Wout; Mann, Simon; Martens, Luc; Mohler, Evelyn; Parslow, Roger C; Poulsen, Aslak Harbo; Radon, Katja; Schüz, Joachim; Thuroczy, György; Viel, Jean-François; Vrijheid, Martine

2010-05-20

The development of new wireless communication technologies that emit radio frequency electromagnetic fields (RF-EMF) is ongoing, but little is known about the RF-EMF exposure distribution in the general population. Previous attempts to measure personal exposure to RF-EMF have used different measurement protocols and analysis methods making comparisons between exposure situations across different study populations very difficult. As a result, observed differences in exposure levels between study populations may not reflect real exposure differences but may be in part, or wholly due to methodological differences. The aim of this paper is to develop a study protocol for future personal RF-EMF exposure studies based on experience drawn from previous research. Using the current knowledge base, we propose procedures for the measurement of personal exposure to RF-EMF, data collection, data management and analysis, and methods for the selection and instruction of study participants. We have identified two basic types of personal RF-EMF measurement studies: population surveys and microenvironmental measurements. In the case of a population survey, the unit of observation is the individual and a randomly selected representative sample of the population is needed to obtain reliable results. For microenvironmental measurements, study participants are selected in order to represent typical behaviours in different microenvironments. These two study types require different methods and procedures. Applying our proposed common core procedures in future personal measurement studies will allow direct comparisons of personal RF-EMF exposures in different populations and study areas.

Conduct of a personal radiofrequency electromagnetic field measurement study: proposed study protocol

PubMed Central

2010-01-01

Background The development of new wireless communication technologies that emit radio frequency electromagnetic fields (RF-EMF) is ongoing, but little is known about the RF-EMF exposure distribution in the general population. Previous attempts to measure personal exposure to RF-EMF have used different measurement protocols and analysis methods making comparisons between exposure situations across different study populations very difficult. As a result, observed differences in exposure levels between study populations may not reflect real exposure differences but may be in part, or wholly due to methodological differences. Methods The aim of this paper is to develop a study protocol for future personal RF-EMF exposure studies based on experience drawn from previous research. Using the current knowledge base, we propose procedures for the measurement of personal exposure to RF-EMF, data collection, data management and analysis, and methods for the selection and instruction of study participants. Results We have identified two basic types of personal RF-EMF measurement studies: population surveys and microenvironmental measurements. In the case of a population survey, the unit of observation is the individual and a randomly selected representative sample of the population is needed to obtain reliable results. For microenvironmental measurements, study participants are selected in order to represent typical behaviours in different microenvironments. These two study types require different methods and procedures. Conclusion Applying our proposed common core procedures in future personal measurement studies will allow direct comparisons of personal RF-EMF exposures in different populations and study areas. PMID:20487532

Rational decision making in a wide scenario of different minimally invasive lumbar interbody fusion approaches and devices.

PubMed

Pimenta, Luiz; Tohmeh, Antoine; Jones, David; Amaral, Rodrigo; Marchi, Luis; Oliveira, Leonardo; Pittman, Bruce C; Bae, Hyun

2018-03-01

With the proliferation of a variety of modern MIS spine surgery procedures, it is mandatory that the surgeon dominate all aspects involved in surgical indication. The information related to the decision making in patient selection for specific procedures is mandatory for surgical success. The objective of this study is to present decision-making criteria in minimally invasive surgery (MIS) selection for a variety of patients and pathologies. In this article, practicing surgeons who specialize in various MIS approaches for spinal fusion were engaged to provide expert opinion and literature review on decision making criteria for several MIS procedures. Pros, cons, relative limitations, and case examples are provided for patient selection in treatment with MIS posterolateral fusion (MIS-PLF), mini anterior lumbar interbody fusion (mini-ALIF), lateral interbody fusion (LLIF), MIS posterior lumbar interbody fusion (MIS-PLIF) and MIS transforaminal lumbar interbody fusion (MIS-TLIF). There is a variety of aspects to consider when deciding which modern MIS surgical approach is most appropriate to use based on patient and pathologic characteristics. The surgeon must adapt them to the characteristic of each type of patients, helping them to choose the most effective and efficient therapeutic option for each case.

Detailed seismic evaluation of bridges along I-24 in Western Kentucky.

DOT National Transportation Integrated Search

2006-09-01

This report presents a seismic rating system and a detailed evaluation procedure for selected highway bridges on/over I-24 in Western Kentucky near the New Madrid Seismic Zone (MNSZ). The rating system, based upon structural vulnerability, seismic an...

People-People. $$$ Ahead--Training Pays Off

ERIC Educational Resources Information Center

Williams, Alec

1978-01-01

Based on experiences in establishing a personnel department and writing an affirmative action plan at Furman University, suggestions are offered for supervisory and employee training to reduce turnover rates. Selection, training, and motivation procedures are identified, and specific questions to ask applicants are listed. (LBH)

Students' approaches to medical school choice: relationship with students' characteristics and motivation.

PubMed

Wouters, Anouk; Croiset, Gerda; Schripsema, Nienke R; Cohen-Schotanus, Janke; Spaai, Gerard W G; Hulsman, Robert L; Kusurkar, Rashmi A

2017-06-12

The aim was to examine main reasons for students' medical school choice and their relationship with students' characteristics and motivation during the students' medical study. In this multisite cross-sectional study, all Year-1 and Year-4 students who had participated in a selection procedure in one of the three Dutch medical schools included in the study were invited to complete an online survey comprising personal data, their main reason for medical school choice and standard, validated questionnaires to measure their strength of motivation (Strength of Motivation for Medical School-Revised) and autonomous and controlled type of motivation (Academic Self-regulation Questionnaire). Four hundred seventy-eight students participated. We performed frequency analyses on the reasons for medical school choice and regression analyses and ANCOVAs to study their associations with students' characteristics and motivation during their medical study. Students indicated 'city' (Year-1: 24.7%, n=75 and Year-4: 36.0%, n=52) and 'selection procedure' (Year-1: 56.9%, n=173 and Year-4: 46.9%, n=68) as the main reasons for their medical school choice. The main reasons were associated with gender, age, being a first-generation university student, ethnic background and medical school, and no significant associations were found between the main reasons and the strength and type of motivation during the students' medical study. Most students had based their medical school choice on the selection procedure. If medical schools desire to achieve a good student-curriculum fit and attract a diverse student population aligning the selection procedure with the curriculum and taking into account various students' different approaches is important.

Evaluation of standardized sample collection, packaging, and decontamination procedures to assess cross-contamination potential during Bacillus anthracis incident response operations

PubMed Central

Calfee, M. Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall

2016-01-01

Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration. PMID:27362274

Evaluation of standardized sample collection, packaging, and decontamination procedures to assess cross-contamination potential during Bacillus anthracis incident response operations.

PubMed

Calfee, M Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall

2016-12-01

Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration.

Infrared radiative energy transfer in gaseous systems

NASA Technical Reports Server (NTRS)

Tiwari, Surendra N.

1991-01-01

Analyses and numerical procedures are presented to investigate the radiative interactions in various energy transfer processes in gaseous systems. Both gray and non-gray radiative formulations for absorption and emission by molecular gases are presented. The gray gas formulations are based on the Planck mean absorption coefficient and the non-gray formulations are based on the wide band model correlations for molecular absorption. Various relations for the radiative flux and divergence of radiative flux are developed. These are useful for different flow conditions and physical problems. Specific plans for obtaining extensive results for different cases are presented. The procedure developed was applied to several realistic problems. Results of selected studies are presented.

Characterization of PMR polyimide resin and prepreg

NASA Technical Reports Server (NTRS)

Lindenmeyer, P. H.; Sheppard, C. H.

1984-01-01

Procedures for the chemical characterization of PMR-15 resin solutions and graphite-reinforced prepregs were developed, and a chemical data base was established. In addition, a basic understanding of PMR-15 resin chemistry was gained; this was translated into effective processing procedures for the production of high quality graphite composites. During the program the PMR monomers and selected model compounds representative of postulated PMR-15 solution chemistry were acquired and characterized. Based on these data, a baseline PMR-15 resin was formulated and evaluated for processing characteristics and composite properties. Commercially available PMR-15 resins were then obtained and chemically characterized. Composite panels were fabricated and evaluated.

[Selection of medical students : Measurement of cognitive abilities and psychosocial competencies].

PubMed

Schwibbe, Anja; Lackamp, Janina; Knorr, Mirjana; Hissbach, Johanna; Kadmon, Martina; Hampe, Wolfgang

2018-02-01

The German Constitutional Court is currently reviewing whether the actual study admission process in medicine is compatible with the constitutional right of freedom of profession, since applicants without an excellent GPA usually have to wait for seven years. If the admission system is changed, politicians would like to increase the influence of psychosocial criteria on selection as specified by the Masterplan Medizinstudium 2020.What experiences have been made with the actual selection procedures? How could Situational Judgement Tests contribute to the validity of future selection procedures to German medical schools?High school GPA is the best predictor of study performance, but is more and more under discussion due to the lack of comparability between states and schools and the growing number of applicants with top grades. Aptitude and knowledge tests, especially in the natural sciences, show incremental validity in predicting study performance. The measurement of psychosocial competencies with traditional interviews shows rather low reliability and validity. The more reliable multiple mini-interviews are superior in predicting practical study performance. Situational judgement tests (SJTs) used abroad are regarded as reliable and valid; the correlation of a German SJT piloted in Hamburg with the multiple mini-interview is cautiously encouraging.A model proposed by the Medizinischer Fakultätentag and the Bundesvertretung der Medizinstudierenden considers these results. Student selection is proposed to be based on a combination of high school GPA (40%) and a cognitive test (40%) as well as an SJT (10%) and job experience (10%). Furthermore, the faculties still have the option to carry out specific selection procedures.

Identification of Genes Involved in Breast Cancer Metastasis by Integrating Protein-Protein Interaction Information with Expression Data.

PubMed

Tian, Xin; Xin, Mingyuan; Luo, Jian; Liu, Mingyao; Jiang, Zhenran

2017-02-01

The selection of relevant genes for breast cancer metastasis is critical for the treatment and prognosis of cancer patients. Although much effort has been devoted to the gene selection procedures by use of different statistical analysis methods or computational techniques, the interpretation of the variables in the resulting survival models has been limited so far. This article proposes a new Random Forest (RF)-based algorithm to identify important variables highly related with breast cancer metastasis, which is based on the important scores of two variable selection algorithms, including the mean decrease Gini (MDG) criteria of Random Forest and the GeneRank algorithm with protein-protein interaction (PPI) information. The new gene selection algorithm can be called PPIRF. The improved prediction accuracy fully illustrated the reliability and high interpretability of gene list selected by the PPIRF approach.

41 CFR 60-3.6 - Use of selection procedures which have not been validated.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) General Principles § 60-3.6 Use of selection procedures which have not been validated. A. Use of alternate... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Use of selection procedures which have not been validated. 60-3.6 Section 60-3.6 Public Contracts and Property Management...

5 CFR 720.206 - Selection guidelines.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Selection guidelines. 720.206 Section 720... guidelines. This subpart sets forth requirements for a recruitment program, not a selection program... procedures and criteria must be consistent with the Uniform Guidelines on Employee Selection Procedures (43...

Selective Heart, Brain and Body Perfusion in Open Aortic Arch Replacement.

PubMed

Maier, Sven; Kari, Fabian; Rylski, Bartosz; Siepe, Matthias; Benk, Christoph; Beyersdorf, Friedhelm

2016-09-01

Open aortic arch replacement is a complex and challenging procedure, especially in post dissection aneurysms and in redo procedures after previous surgery of the ascending aorta or aortic root. We report our experience with the simultaneous selective perfusion of heart, brain, and remaining body to ensure optimal perfusion and to minimize perfusion-related risks during these procedures. We used a specially configured heart-lung machine with a centrifugal pump as arterial pump and an additional roller pump for the selective cerebral perfusion. Initial arterial cannulation is achieved via femoral artery or right axillary artery. After lower body circulatory arrest and selective antegrade cerebral perfusion for the distal arch anastomosis, we started selective lower body perfusion simultaneously to the selective antegrade cerebral perfusion and heart perfusion. Eighteen patients were successfully treated with this perfusion strategy from October 2012 to November 2015. No complications related to the heart-lung machine and the cannulation occurred during the procedures. Mean cardiopulmonary bypass time was 239 ± 33 minutes, the simultaneous selective perfusion of brain, heart, and remaining body lasted 55 ± 23 minutes. One patient suffered temporary neurological deficit that resolved completely during intensive care unit stay. No patient experienced a permanent neurological deficit or end-organ dysfunction. These high-risk procedures require a concept with a special setup of the heart-lung machine. Our perfusion strategy for aortic arch replacement ensures a selective perfusion of heart, brain, and lower body during this complex procedure and we observed excellent outcomes in this small series. This perfusion strategy is also applicable for redo procedures.

Development of a lectin binding assay to differentiate between recombinant and endogenous proteins in pharmacokinetic studies of protein-biopharmaceuticals.

PubMed

Weber, Alfred; Minibeck, Eva; Scheiflinger, Friedrich; Turecek, Peter L

2015-04-10

Human glycoproteins, expressed in hamster cell lines, show similar glycosylation patterns to naturally occurring human molecules except for a minute difference in the linkage of terminal sialic acid: both cell types lack α2,6-galactosyl-sialyltransferase, abundantly expressed in human hepatocytes and responsible for the α2,6-sialylation of circulating glycoproteins. This minute difference, which is currently not known to have any physiological relevance, was the basis for the selective measurement of recombinant glycoproteins in the presence of their endogenous counterparts. The assay is based on using the lectin Sambucus nigra agglutinin (SNA), selectively binding to α2,6-sialylated N-glycans. Using von Willebrand factor (VWF), factor IX (FIX), and factor VIIa (FVIIa), it was demonstrated that (i) the plasma-derived proteins, but not the corresponding recombinant proteins, specifically bind to SNA and (ii) this binding can be used to deplete the plasma-derived proteins. The feasibility of this approach was confirmed in spike-recovery studies for all three recombinant coagulation proteins in human plasma and for recombinant VWF (rVWF) in macaque plasma. Analysis of plasma samples from macaques after administration of recombinant and a plasma-derived VWF demonstrated the suitability and robustness of this approach. Data showed that rVWF could be selectively measured without changing the ELISAs and furthermore revealed the limitations of baseline adjustment using a single measurement of the predose concentration only. The SNA gel-based depletion procedure can easily be integrated in existing procedures as a specific sample pre-treatment step. While ELISA-based methods were used to measure the recombinant coagulation proteins in the supernatants obtained by depletion, this procedure is applicable for all biochemical analyses. Copyright © 2015 Elsevier B.V. All rights reserved.

N1-Alkylated 3,4-dihydropyrimidine-2(1H)-ones: Convenient one-pot selective synthesis and evaluation of their calcium channel blocking activity.

PubMed

Singh, Kamaljit; Arora, Divya; Poremsky, Elizabeth; Lowery, Jazmyne; Moreland, Robert S

2009-05-01

It has been found that selective N1-alkylation of 3,4-dihydropyrimidine-2(1H)-ones can be achieved under solvent-less, mild phase transfer catalytic (PTC) conditions with tetrabutylammonium hydrogen sulfate and 50% aqueous NaOH as the catalyst and base, respectively. The procedure is tolerant to substitutional variation at key diversity points on the pyrimidinone moiety.

Information Fusion for High Level Situation Assessment and Prediction

DTIC Science & Technology

2007-03-01

procedure includes deciding a sensor set that achieves the optimal trade -off between its cost and benefit, activating the identified sensors, integrating...and effective decision can be made by dynamic inference based on selecting a subset of sensors with the optimal trade -off between their cost and...first step is achieved by designing a sensor selection criterion that represents the trade -off between the sensor benefit and sensor cost. This is then

Access point selection game with mobile users using correlated equilibrium.

PubMed

Sohn, Insoo

2015-01-01

One of the most important issues in wireless local area network (WLAN) systems with multiple access points (APs) is the AP selection problem. Game theory is a mathematical tool used to analyze the interactions in multiplayer systems and has been applied to various problems in wireless networks. Correlated equilibrium (CE) is one of the powerful game theory solution concepts, which is more general than the Nash equilibrium for analyzing the interactions in multiplayer mixed strategy games. A game-theoretic formulation of the AP selection problem with mobile users is presented using a novel scheme based on a regret-based learning procedure. Through convergence analysis, we show that the joint actions based on the proposed algorithm achieve CE. Simulation results illustrate that the proposed algorithm is effective in a realistic WLAN environment with user mobility and achieves maximum system throughput based on the game-theoretic formulation.

Access Point Selection Game with Mobile Users Using Correlated Equilibrium

PubMed Central

Sohn, Insoo

2015-01-01

One of the most important issues in wireless local area network (WLAN) systems with multiple access points (APs) is the AP selection problem. Game theory is a mathematical tool used to analyze the interactions in multiplayer systems and has been applied to various problems in wireless networks. Correlated equilibrium (CE) is one of the powerful game theory solution concepts, which is more general than the Nash equilibrium for analyzing the interactions in multiplayer mixed strategy games. A game-theoretic formulation of the AP selection problem with mobile users is presented using a novel scheme based on a regret-based learning procedure. Through convergence analysis, we show that the joint actions based on the proposed algorithm achieve CE. Simulation results illustrate that the proposed algorithm is effective in a realistic WLAN environment with user mobility and achieves maximum system throughput based on the game-theoretic formulation. PMID:25785726

Test of association: which one is the most appropriate for my study?

PubMed

Gonzalez-Chica, David Alejandro; Bastos, João Luiz; Duquia, Rodrigo Pereira; Bonamigo, Renan Rangel; Martínez-Mesa, Jeovany

2015-01-01

Hypothesis tests are statistical tools widely used for assessing whether or not there is an association between two or more variables. These tests provide a probability of the type 1 error (p-value), which is used to accept or reject the null study hypothesis. To provide a practical guide to help researchers carefully select the most appropriate procedure to answer the research question. We discuss the logic of hypothesis testing and present the prerequisites of each procedure based on practical examples.

Ultrapure glass optical waveguide development in microgravity by the sol-gel process

NASA Technical Reports Server (NTRS)

Mukherjee, S. P.

1980-01-01

The alkali-borosilicate system was selected as the glass system for the preparation of ultrapure low loss glasses suitable for optical communication. The effect of different oxide contents on the absorption loss was critically reviewed. One composition was chosen to develop the gel preparation procedure in the alkali-borosilicate system. In addition, several procedures for the preparation of gels based on two different approaches were developed. The influence of different preparation parameters were investigated qualitatively. Several conclusions are drawn from the results.

Practical guidelines to select and scale earthquake records for nonlinear response history analysis of structures

USGS Publications Warehouse

Kalkan, Erol; Chopra, Anil K.

2010-01-01

Earthquake engineering practice is increasingly using nonlinear response history analysis (RHA) to demonstrate performance of structures. This rigorous method of analysis requires selection and scaling of ground motions appropriate to design hazard levels. Presented herein is a modal-pushover-based scaling (MPS) method to scale ground motions for use in nonlinear RHA of buildings and bridges. In the MPS method, the ground motions are scaled to match (to a specified tolerance) a target value of the inelastic deformation of the first-'mode' inelastic single-degree-of-freedom (SDF) system whose properties are determined by first-'mode' pushover analysis. Appropriate for first-?mode? dominated structures, this approach is extended for structures with significant contributions of higher modes by considering elastic deformation of second-'mode' SDF system in selecting a subset of the scaled ground motions. Based on results presented for two bridges, covering single- and multi-span 'ordinary standard' bridge types, and six buildings, covering low-, mid-, and tall building types in California, the accuracy and efficiency of the MPS procedure are established and its superiority over the ASCE/SEI 7-05 scaling procedure is demonstrated.

Design of high-fidelity haptic display for one-dimensional force reflection applications

NASA Astrophysics Data System (ADS)

Gillespie, Brent; Rosenberg, Louis B.

1995-12-01

This paper discusses the development of a virtual reality platform for the simulation of medical procedures which involve needle insertion into human tissue. The paper's focus is the hardware and software requirements for haptic display of a particular medical procedure known as epidural analgesia. To perform this delicate manual procedure, an anesthesiologist must carefully guide a needle through various layers of tissue using only haptic cues for guidance. As a simplifying aspect for the simulator design, all motions and forces involved in the task occur along a fixed line once insertion begins. To create a haptic representation of this procedure, we have explored both physical modeling and perceptual modeling techniques. A preliminary physical model was built based on CT-scan data of the operative site. A preliminary perceptual model was built based on current training techniques for the procedure provided by a skilled instructor. We compare and contrast these two modeling methods and discuss the implications of each. We select and defend the perceptual model as a superior approach for the epidural analgesia simulator.

Simultaneous determination of selected biogenic amines in alcoholic beverage samples by isotachophoretic and chromatographic methods.

PubMed

Jastrzębska, Aneta; Piasta, Anna; Szłyk, Edward

2014-01-01

A simple and useful method for the determination of biogenic amines in beverage samples based on isotachophoretic separation is described. The proposed procedure permitted simultaneous analysis of histamine, tyramine, cadaverine, putrescine, tryptamine, 2-phenylethylamine, spermine and spermidine. The data presented demonstrate the utility, simplicity, flexibility, sensitivity and environmentally friendly character of the proposed method. The precision of the method expressed as coefficient of variations varied from 0.1% to 5.9% for beverage samples, whereas recoveries varied from 91% to 101%. The results for the determination of biogenic amines were compared with an HPLC procedure based on a pre-column derivatisation reaction of biogenic amines with dansyl chloride. Furthermore, the derivatisation procedure was optimised by verification of concentration and pH of the buffer, the addition of organic solvents, reaction time and temperature.

Evaluating ecoregion-based height-diameter relationships of five economically important Appalachian hardwood species in West Virginia

Treesearch

John R. Brooks; Harry V., Jr. Wiant

2007-01-01

Five economically important Appalachian hardwood species were selected from five ecoregions in West Virginia. A nonlinear extra sum of squares procedure was employed to test whether the height-diameter relationships, based on measurements from the 2000 inventory from West Virginia, were significantly different at the ecoregion level. For all species examined, the null...

Development of orthotropic birefringent materials for photoelastic stress analysis

NASA Technical Reports Server (NTRS)

Daniel, I. M.; Niiro, T.; Koller, G. M.

1981-01-01

Materials were selected and fabrication procedures developed for orthotropic birefringent materials. An epoxy resin (Maraset 658/558 system) was selected as the matrix material. Fibers obtained from style 3733 glass cloth and type 1062 glass roving were used as reinforcement. Two different fabrication procedures were used. In the first one, layers of unidirectional fibers removed from the glass cloth were stacked, impregnated with resin, bagged and cured in the autoclave at an elevated temperature. In the second procedure, the glass roving was drywound over metal frames, impregnated with resin and cured at room temperature under pressure and vacuum in an autoclave. Unidirectional, angle-ply and quasi-isotropic laminates of two thicknesses and with embedded flaws were fabricated. The matrix and the unidirectional glass/epoxy material were fully characterized. The density, fiber volume ratio, mechanical, and optical properties were determined. The fiber volume ratio was over 0.50. Birefringent properties were in good agreement with predictions based on a stress proportioning concept and also, with one exception, with properties predicted by a finite element analysis.

National Hospital Discharge Survey: 2002 annual summary with detailed diagnosis and procedure data.

PubMed

Kozak, Lola J; Owings, Maria F; Hall, Margaret J

2005-03-01

This report presents 2002 national estimates and selected trend data on the use of non-Federal short-stay hospitals in the United States. Estimates are provided by selected patient and hospital characteristics, diagnoses, and surgical and nonsurgical procedures performed. Estimates of diagnoses and procedures are presented according to International Classification of Diseases, 9th Revision, Clinical Modification (ICD-9-CM) codes. The estimates are based on data collected through the National Hospital Discharge Survey (NHDS). The survey has been conducted annually since 1965. In 2002, data were collected for approximately 327,000 discharges. Of the 474 eligible non-Federal short-stay hospitals in the sample, 445 (94 percent) responded to the survey. An estimated 33.7 million inpatients were discharged from non-Federal short-stay hospitals in 2002. They used 164.2 million days of care and had an average length of stay of 4.9 days. Common first-listed discharge diagnoses included delivery, ischemic heart disease, psychoses, pneumonia, and malignant neoplasms. Inpatients had 6.8 million cardiovascular procedures and 6.6 million obstetric procedures. Males had higher rates for cardiac procedures such as cardiac catheterization and coronary artery bypass graft, but males and females had similar rates of pacemaker procedures. The number and rate of all cesarean deliveries, primary and repeat, rose from 1995 to 2002; the rate of vaginal birth after cesarean delivery dropped from 35.5 in 1995 to 15.8 in 2002.

A smart Monte Carlo procedure for production costing and uncertainty analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, C.; Stremel, J.

1996-11-01

Electric utilities using chronological production costing models to decide whether to buy or sell power over the next week or next few weeks need to determine potential profits or losses under a number of uncertainties. A large amount of money can be at stake--often $100,000 a day or more--and one party of the sale must always take on the risk. In the case of fixed price ($/MWh) contracts, the seller accepts the risk. In the case of cost plus contracts, the buyer must accept the risk. So, modeling uncertainty and understanding the risk accurately can improve the competitive edge ofmore » the user. This paper investigates an efficient procedure for representing risks and costs from capacity outages. Typically, production costing models use an algorithm based on some form of random number generator to select resources as available or on outage. These algorithms allow experiments to be repeated and gains and losses to be observed in a short time. The authors perform several experiments to examine the capability of three unit outage selection methods and measures their results. Specifically, a brute force Monte Carlo procedure, a Monte Carlo procedure with Latin Hypercube sampling, and a Smart Monte Carlo procedure with cost stratification and directed sampling are examined.« less

Determining Consumer Preference for Furniture Product Characteristics

ERIC Educational Resources Information Center

Turner, Carolyn S.; Edwards, Kay P.

1974-01-01

The paper describes instruments for determining preferences of consumers for selected product characteristics associated with furniture choices--specifically style, color, color scheme, texture, and materials--and the procedures for administration of those instruments. Results are based on a random sampling of public housing residents. (Author/MW)

Cryopreservation of citrus seed via dehydration followed by immersion in liquid nitrogen

USDA-ARS?s Scientific Manuscript database

An important method for plant germplasm conservation is offered by a biotechnology-based approach of cryopreservation. Cryopreservation refers to the storage of plant material at ultralow temperatures in liquid nitrogen. A procedure for cryopreservation of polyembryonic seeds was improved for select...

Expert systems for fault diagnosis in nuclear reactor control

NASA Astrophysics Data System (ADS)

Jalel, N. A.; Nicholson, H.

1990-11-01

An expert system for accident analysis and fault diagnosis for the Loss Of Fluid Test (LOFT) reactor, a small scale pressurized water reactor, was developed for a personal computer. The knowledge of the system is presented using a production rule approach with a backward chaining inference engine. The data base of the system includes simulated dependent state variables of the LOFT reactor model. Another system is designed to assist the operator in choosing the appropriate cooling mode and to diagnose the fault in the selected cooling system. The response tree, which is used to provide the link between a list of very specific accident sequences and a set of generic emergency procedures which help the operator in monitoring system status, and to differentiate between different accident sequences and select the correct procedures, is used to build the system knowledge base. Both systems are written in TURBO PROLOG language and can be run on an IBM PC compatible with 640k RAM, 40 Mbyte hard disk and color graphics.

Portal hypertension and gastrointestinal bleeding: Diagnosis, prevention and management

PubMed Central

Biecker, Erwin

2013-01-01

Bleeding from esophageal varices is a life threatening complication of portal hypertension. Primary prevention of bleeding in patients at risk for a first bleeding episode is therefore a major goal. Medical prophylaxis consists of non-selective beta-blockers like propranolol or carvedilol. Variceal endoscopic band ligation is equally effective but procedure related morbidity is a drawback of the method. Therapy of acute bleeding is based on three strategies: vasopressor drugs like terlipressin, antibiotics and endoscopic therapy. In refractory bleeding, self-expandable stents offer an option for bridging to definite treatments like transjugular intrahepatic portosystemic shunt (TIPS). Treatment of bleeding from gastric varices depends on vasopressor drugs and on injection of varices with cyanoacrylate. Strategies for primary or secondary prevention are based on non-selective beta-blockers but data from large clinical trials is lacking. Therapy of refractory bleeding relies on shunt-procedures like TIPS. Bleeding from ectopic varices, portal hypertensive gastropathy and gastric antral vascular ectasia-syndrome is less common. Possible medical and endoscopic treatment options are discussed. PMID:23964137

Development of Maximum Considered Earthquake Ground Motion Maps

USGS Publications Warehouse

Leyendecker, E.V.; Hunt, R.J.; Frankel, A.D.; Rukstales, K.S.

2000-01-01

The 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings use a design procedure that is based on spectral response acceleration rather than the traditional peak ground acceleration, peak ground velocity, or zone factors. The spectral response accelerations are obtained from maps prepared following the recommendations of the Building Seismic Safety Council's (BSSC) Seismic Design Procedures Group (SDPG). The SDPG-recommended maps, the Maximum Considered Earthquake (MCE) Ground Motion Maps, are based on the U.S. Geological Survey (USGS) probabilistic hazard maps with additional modifications incorporating deterministic ground motions in selected areas and the application of engineering judgement. The MCE ground motion maps included with the 1997 NEHRP Provisions also serve as the basis for the ground motion maps used in the seismic design portions of the 2000 International Building Code and the 2000 International Residential Code. Additionally the design maps prepared for the 1997 NEHRP Provisions, combined with selected USGS probabilistic maps, are used with the 1997 NEHRP Guidelines for the Seismic Rehabilitation of Buildings.

49 CFR 542.2 - Procedures for selecting low theft light duty truck lines with a majority of major parts...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Procedures for selecting low theft light duty... TRUCK LINES TO BE COVERED BY THE THEFT PREVENTION STANDARD § 542.2 Procedures for selecting low theft... a low theft rate have major parts interchangeable with a majority of the covered major parts of a...

Partial Transient Liquid-Phase Bonding, Part II: A Filtering Routine for Determining All Possible Interlayer Combinations

NASA Astrophysics Data System (ADS)

Cook, Grant O.; Sorensen, Carl D.

2013-12-01

Partial transient liquid-phase (PTLP) bonding is currently an esoteric joining process with limited applications. However, it has preferable advantages compared with typical joining techniques and is the best joining technique for certain applications. Specifically, it can bond hard-to-join materials as well as dissimilar material types, and bonding is performed at comparatively low temperatures. Part of the difficulty in applying PTLP bonding is finding suitable interlayer combinations (ICs). A novel interlayer selection procedure has been developed to facilitate the identification of ICs that will create successful PTLP bonds and is explained in a companion article. An integral part of the selection procedure is a filtering routine that identifies all possible ICs for a given application. This routine utilizes a set of customizable parameters that are based on key characteristics of PTLP bonding. These parameters include important design considerations such as bonding temperature, target remelting temperature, bond solid type, and interlayer thicknesses. The output from this routine provides a detailed view of each candidate IC along with a broad view of the entire candidate set, greatly facilitating the selection of ideal ICs. This routine provides a new perspective on the PTLP bonding process. In addition, the use of this routine, by way of the accompanying selection procedure, will expand PTLP bonding as a viable joining process.

A brief opportunity to run does not function as a reinforcer for mice selected for high daily wheel-running rates.

PubMed

Belke, Terry W; Garland, Theodore

2007-09-01

Mice from replicate lines, selectively bred based on high daily wheel-running rates, run more total revolutions and at higher average speeds than do mice from nonselected control lines. Based on this difference it was assumed that selected mice would find the opportunity to run in a wheel a more efficacious consequence. To assess this assumption within an operant paradigm, mice must be trained to make a response to produce the opportunity to run as a consequence. In the present study an autoshaping procedure was used to compare the acquisition of lever pressing reinforced by the opportunity to run for a brief opportunity (i.e., 90 s) between selected and control mice and then, using an operant procedure, the effect of the duration of the opportunity to run on lever pressing was assessed by varying reinforcer duration over values of 90 s, 30 min, and 90 s. The reinforcement schedule was a ratio schedule (FR 1 or VR 3). Results from the autoshaping phase showed that more control mice met a criterion of responses on 50% of trials. During the operant phase, when reinforcer duration was 90 s, almost all control, but few selected mice completed a session of 20 reinforcers; however, when reinforcer duration was increased to 30 min almost all selected and control mice completed a session of 20 reinforcers. Taken together, these results suggest that selective breeding based on wheel-running rates over 24 hr may have altered the motivational system in a way that reduces the reinforcing value of shorter running durations. The implications of this finding for these mice as a model for attention deficit hyperactivity disorder (ADHD) are discussed. It also is proposed that there may be an inherent trade-off in the motivational system for activities of short versus long duration.

A Brief Opportunity to Run Does Not Function as a Reinforcer for Mice Selected for High Daily Wheel-running Rates

PubMed Central

Belke, Terry W; GarlandJr, Theodore

2007-01-01

Mice from replicate lines, selectively bred based on high daily wheel-running rates, run more total revolutions and at higher average speeds than do mice from nonselected control lines. Based on this difference it was assumed that selected mice would find the opportunity to run in a wheel a more efficacious consequence. To assess this assumption within an operant paradigm, mice must be trained to make a response to produce the opportunity to run as a consequence. In the present study an autoshaping procedure was used to compare the acquisition of lever pressing reinforced by the opportunity to run for a brief opportunity (i.e., 90 s) between selected and control mice and then, using an operant procedure, the effect of the duration of the opportunity to run on lever pressing was assessed by varying reinforcer duration over values of 90 s, 30 min, and 90 s. The reinforcement schedule was a ratio schedule (FR 1 or VR 3). Results from the autoshaping phase showed that more control mice met a criterion of responses on 50% of trials. During the operant phase, when reinforcer duration was 90 s, almost all control, but few selected mice completed a session of 20 reinforcers; however, when reinforcer duration was increased to 30 min almost all selected and control mice completed a session of 20 reinforcers. Taken together, these results suggest that selective breeding based on wheel-running rates over 24 hr may have altered the motivational system in a way that reduces the reinforcing value of shorter running durations. The implications of this finding for these mice as a model for attention deficit hyperactivity disorder (ADHD) are discussed. It also is proposed that there may be an inherent trade-off in the motivational system for activities of short versus long duration. PMID:17970415

47 CFR 90.165 - Procedures for mutually exclusive applications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... grant, pursuant to § 1.935 of this chapter. (1) Selection methods. In selecting the application to grant, the Commission may use competitive bidding, random selection, or comparative hearings, depending on... chapter, either before or after employing selection procedures. (3) Type of filing group used. Except as...

One-step selection of Vaccinia virus-binding DNA aptamers by MonoLEX

PubMed Central

Nitsche, Andreas; Kurth, Andreas; Dunkhorst, Anna; Pänke, Oliver; Sielaff, Hendrik; Junge, Wolfgang; Muth, Doreen; Scheller, Frieder; Stöcklein, Walter; Dahmen, Claudia; Pauli, Georg; Kage, Andreas

2007-01-01

Background As a new class of therapeutic and diagnostic reagents, more than fifteen years ago RNA and DNA aptamers were identified as binding molecules to numerous small compounds, proteins and rarely even to complete pathogen particles. Most aptamers were isolated from complex libraries of synthetic nucleic acids by a process termed SELEX based on several selection and amplification steps. Here we report the application of a new one-step selection method (MonoLEX) to acquire high-affinity DNA aptamers binding Vaccinia virus used as a model organism for complex target structures. Results The selection against complete Vaccinia virus particles resulted in a 64-base DNA aptamer specifically binding to orthopoxviruses as validated by dot blot analysis, Surface Plasmon Resonance, Fluorescence Correlation Spectroscopy and real-time PCR, following an aptamer blotting assay. The same oligonucleotide showed the ability to inhibit in vitro infection of Vaccinia virus and other orthopoxviruses in a concentration-dependent manner. Conclusion The MonoLEX method is a straightforward procedure as demonstrated here for the identification of a high-affinity DNA aptamer binding Vaccinia virus. MonoLEX comprises a single affinity chromatography step, followed by subsequent physical segmentation of the affinity resin and a single final PCR amplification step of bound aptamers. Therefore, this procedure improves the selection of high affinity aptamers by reducing the competition between aptamers of different affinities during the PCR step, indicating an advantage for the single-round MonoLEX method. PMID:17697378

Understanding behavior under nonverbal transitive-inference procedures: Stimulus-control-topography analyses.

PubMed

Galizio, Ann; Doughty, Adam H; Williams, Dean C; Saunders, Kathryn J

2017-07-01

Following training with verbal stimulus relations involving A is greater than B and B is greater than C, verbally-competent individuals reliably select A>C when asked "which is greater, A or C?" (i.e., verbal transitive inference). This result is easy to interpret. Nonhuman animals and humans with and without intellectual disabilities have been exposed to nonverbal transitive-inference procedures involving trained arbitrary stimulus relations. Following the training of A+B-, B+C-, C+D-, and D+E-, B reliably is selected over D (i.e., nonverbal transitive inference). Such findings are more challenging to interpret. The present research explored accounts of nonverbal transitive inference based in transitive inference per se, reinforcement, such as value-transfer theory, and operant stimulus control. In Experiment 1, college students selected B>G following the training of A+B-, B+C-, C+D-///E+F-, F+G-, and G+H- (where///signifies the omission of D+E-). In Experiment 2, college students selected B>G following the training of A+B-, B+C-, C+D-///E+F-, F+G-, and G+X- (where X refers to 10 stimuli that alternated across trials). In Experiment 3, college students selected G>B following the training of Y+B-, B+C-, C+D-///E+F-, F+G-, and G+X- (where Y and X refer to 10 stimuli, respectively, that alternated across trials). These findings are discussed in the context of operant stimulus control by offering an approach based in stimulus B typically acquiring only a select stimulus control topography. Copyright © 2017 Elsevier B.V. All rights reserved.

Vessel Classification in Cosmo-Skymed SAR Data Using Hierarchical Feature Selection

NASA Astrophysics Data System (ADS)

Makedonas, A.; Theoharatos, C.; Tsagaris, V.; Anastasopoulos, V.; Costicoglou, S.

2015-04-01

SAR based ship detection and classification are important elements of maritime monitoring applications. Recently, high-resolution SAR data have opened new possibilities to researchers for achieving improved classification results. In this work, a hierarchical vessel classification procedure is presented based on a robust feature extraction and selection scheme that utilizes scale, shape and texture features in a hierarchical way. Initially, different types of feature extraction algorithms are implemented in order to form the utilized feature pool, able to represent the structure, material, orientation and other vessel type characteristics. A two-stage hierarchical feature selection algorithm is utilized next in order to be able to discriminate effectively civilian vessels into three distinct types, in COSMO-SkyMed SAR images: cargos, small ships and tankers. In our analysis, scale and shape features are utilized in order to discriminate smaller types of vessels present in the available SAR data, or shape specific vessels. Then, the most informative texture and intensity features are incorporated in order to be able to better distinguish the civilian types with high accuracy. A feature selection procedure that utilizes heuristic measures based on features' statistical characteristics, followed by an exhaustive research with feature sets formed by the most qualified features is carried out, in order to discriminate the most appropriate combination of features for the final classification. In our analysis, five COSMO-SkyMed SAR data with 2.2m x 2.2m resolution were used to analyse the detailed characteristics of these types of ships. A total of 111 ships with available AIS data were used in the classification process. The experimental results show that this method has good performance in ship classification, with an overall accuracy reaching 83%. Further investigation of additional features and proper feature selection is currently in progress.

Network-Based Method for Identifying Co-Regeneration Genes in Bone, Dentin, Nerve and Vessel Tissues

PubMed Central

Pan, Hongying; Zhang, Yu-Hang; Feng, Kaiyan; Kong, XiangYin; Cai, Yu-Dong

2017-01-01

Bone and dental diseases are serious public health problems. Most current clinical treatments for these diseases can produce side effects. Regeneration is a promising therapy for bone and dental diseases, yielding natural tissue recovery with few side effects. Because soft tissues inside the bone and dentin are densely populated with nerves and vessels, the study of bone and dentin regeneration should also consider the co-regeneration of nerves and vessels. In this study, a network-based method to identify co-regeneration genes for bone, dentin, nerve and vessel was constructed based on an extensive network of protein–protein interactions. Three procedures were applied in the network-based method. The first procedure, searching, sought the shortest paths connecting regeneration genes of one tissue type with regeneration genes of other tissues, thereby extracting possible co-regeneration genes. The second procedure, testing, employed a permutation test to evaluate whether possible genes were false discoveries; these genes were excluded by the testing procedure. The last procedure, screening, employed two rules, the betweenness ratio rule and interaction score rule, to select the most essential genes. A total of seventeen genes were inferred by the method, which were deemed to contribute to co-regeneration of at least two tissues. All these seventeen genes were extensively discussed to validate the utility of the method. PMID:28974058

Network-Based Method for Identifying Co- Regeneration Genes in Bone, Dentin, Nerve and Vessel Tissues.

PubMed

Chen, Lei; Pan, Hongying; Zhang, Yu-Hang; Feng, Kaiyan; Kong, XiangYin; Huang, Tao; Cai, Yu-Dong

2017-10-02

Bone and dental diseases are serious public health problems. Most current clinical treatments for these diseases can produce side effects. Regeneration is a promising therapy for bone and dental diseases, yielding natural tissue recovery with few side effects. Because soft tissues inside the bone and dentin are densely populated with nerves and vessels, the study of bone and dentin regeneration should also consider the co-regeneration of nerves and vessels. In this study, a network-based method to identify co-regeneration genes for bone, dentin, nerve and vessel was constructed based on an extensive network of protein-protein interactions. Three procedures were applied in the network-based method. The first procedure, searching, sought the shortest paths connecting regeneration genes of one tissue type with regeneration genes of other tissues, thereby extracting possible co-regeneration genes. The second procedure, testing, employed a permutation test to evaluate whether possible genes were false discoveries; these genes were excluded by the testing procedure. The last procedure, screening, employed two rules, the betweenness ratio rule and interaction score rule, to select the most essential genes. A total of seventeen genes were inferred by the method, which were deemed to contribute to co-regeneration of at least two tissues. All these seventeen genes were extensively discussed to validate the utility of the method.

An Assessment of Artificial Compressibility and Pressure Projection Methods for Incompressible Flow Simulations

NASA Technical Reports Server (NTRS)

Kwak, Dochan; Kiris, C.; Smith, Charles A. (Technical Monitor)

1998-01-01

Performance of the two commonly used numerical procedures, one based on artificial compressibility method and the other pressure projection method, are compared. These formulations are selected primarily because they are designed for three-dimensional applications. The computational procedures are compared by obtaining steady state solutions of a wake vortex and unsteady solutions of a curved duct flow. For steady computations, artificial compressibility was very efficient in terms of computing time and robustness. For an unsteady flow which requires small physical time step, pressure projection method was found to be computationally more efficient than an artificial compressibility method. This comparison is intended to give some basis for selecting a method or a flow solution code for large three-dimensional applications where computing resources become a critical issue.

Feature Screening in Ultrahigh Dimensional Cox's Model.

PubMed

Yang, Guangren; Yu, Ye; Li, Runze; Buu, Anne

Survival data with ultrahigh dimensional covariates such as genetic markers have been collected in medical studies and other fields. In this work, we propose a feature screening procedure for the Cox model with ultrahigh dimensional covariates. The proposed procedure is distinguished from the existing sure independence screening (SIS) procedures (Fan, Feng and Wu, 2010, Zhao and Li, 2012) in that the proposed procedure is based on joint likelihood of potential active predictors, and therefore is not a marginal screening procedure. The proposed procedure can effectively identify active predictors that are jointly dependent but marginally independent of the response without performing an iterative procedure. We develop a computationally effective algorithm to carry out the proposed procedure and establish the ascent property of the proposed algorithm. We further prove that the proposed procedure possesses the sure screening property. That is, with the probability tending to one, the selected variable set includes the actual active predictors. We conduct Monte Carlo simulation to evaluate the finite sample performance of the proposed procedure and further compare the proposed procedure and existing SIS procedures. The proposed methodology is also demonstrated through an empirical analysis of a real data example.

A general procedure to generate models for urban environmental-noise pollution using feature selection and machine learning methods.

PubMed

Torija, Antonio J; Ruiz, Diego P

2015-02-01

The prediction of environmental noise in urban environments requires the solution of a complex and non-linear problem, since there are complex relationships among the multitude of variables involved in the characterization and modelling of environmental noise and environmental-noise magnitudes. Moreover, the inclusion of the great spatial heterogeneity characteristic of urban environments seems to be essential in order to achieve an accurate environmental-noise prediction in cities. This problem is addressed in this paper, where a procedure based on feature-selection techniques and machine-learning regression methods is proposed and applied to this environmental problem. Three machine-learning regression methods, which are considered very robust in solving non-linear problems, are used to estimate the energy-equivalent sound-pressure level descriptor (LAeq). These three methods are: (i) multilayer perceptron (MLP), (ii) sequential minimal optimisation (SMO), and (iii) Gaussian processes for regression (GPR). In addition, because of the high number of input variables involved in environmental-noise modelling and estimation in urban environments, which make LAeq prediction models quite complex and costly in terms of time and resources for application to real situations, three different techniques are used to approach feature selection or data reduction. The feature-selection techniques used are: (i) correlation-based feature-subset selection (CFS), (ii) wrapper for feature-subset selection (WFS), and the data reduction technique is principal-component analysis (PCA). The subsequent analysis leads to a proposal of different schemes, depending on the needs regarding data collection and accuracy. The use of WFS as the feature-selection technique with the implementation of SMO or GPR as regression algorithm provides the best LAeq estimation (R(2)=0.94 and mean absolute error (MAE)=1.14-1.16 dB(A)). Copyright © 2014 Elsevier B.V. All rights reserved.

Selecting Students for Training in Health Care. A Practical Guide to Improving Selection Procedures. WHO Offset Publication No. 74.

ERIC Educational Resources Information Center

Bennett, Mick; Wakeford, Richard

This guide is intended to help those responsible for choosing health care trainees to develop and improve their selection procedures. Special reference is given to health workers in maternal and child health. Chapter 1 deals with health care policy implications for selection of trainees, the different functions of selection and conflicts that…

Evaluation of Dipsol IZ-C17 LHE Zinc-Nickel Plating (Briefing Charts)

DTIC Science & Technology

2007-01-24

Results • Based on Successful Test Results an LHE Alkaline Zn-Ni Formula was Selected for Further Development – Identified as Dipsol IZ-C17 (13 to...Hydrogen Embrittlement Test Methods • Select Repair Procedures 16. ENVIRONMENTAL ASSURANCE 2006 Status • IZ-C17 Tech Bulletin (Draft) Prepared...Corrosion Testing (Salt Spray and Galvanic) – Fluid Immersion (ASTM F 483) – Lubricity (Fasteners) – Strippability (BCA – Ammonium Nitrate pH 10) – Throwing

The Magellanic Cloud supernova remnants

NASA Astrophysics Data System (ADS)

Dopita, M. A.

1984-09-01

The first supernova remnant (SNR) in the Magellanic Clouds was discovered by Mathewson and Healey (1964). Surveys for SNR in the Magellanic Clouds are discussed, taking into account the selection procedure initially used, current optical selection criteria for SNR, the launching of the Einstein Observatory, and the information obtainable by a detailed study of the discovered SNR. Attention is also given to the oxygen-rich SNR, the nonradiative shock SNR, the evolved radiative SNR, and conclusions based on the obtained results.

Soundwalk approach to identify urban soundscapes individually.

PubMed

Jeon, Jin Yong; Hong, Joo Young; Lee, Pyoung Jik

2013-07-01

This study proposes a soundwalk procedure for evaluating urban soundscapes. Previous studies, which adopted soundwalk methodologies for investigating participants' responses to visual and acoustic environments, were analyzed considering type, evaluation position, measurement, and subjective assessment. An individual soundwalk procedure was then developed based on asking individual subjects to walk and select evaluation positions where they perceived any positive or negative characteristics of the urban soundscape. A case study was performed in urban spaces and the results were compared with those of the group soundwalk to validate the individual soundwalk procedure. Thirty subjects (15 architects and 15 acousticians) participated in the soundwalk. During the soundwalk, the subjects selected a total of 196 positions, and those were classified into 4 groups. It was found that soundscape perceptions were dominated by acoustic comfort, visual images, and openness. It was also revealed that perceived elements of the acoustic environment and visual image differed across classified soundscape groups, and there was a difference between architects and acousticians in terms of how they described their impressions of the soundscape elements. The results show that the individual soundwalk procedure has advantages for measuring diverse subjective responses and for obtaining the perceived elements of the urban soundscape.

32 CFR 231.5 - Procedures-domestic banks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to the TGA. (vi) A list of organizational and nonappropriated fund accounts, the name and location of... surveillance equipment, when necessary. (ix) Reasons for use of space controlled by the General Services... solicitation. Proposals shall be evaluated and ultimate selection made based upon the factors and weights...

Correlation of rapid hydrometer analysis for select material to existing procedure LDH-TR-407-66 : final report.

DOT National Transportation Integrated Search

1968-05-01

Conditions arise during construction of bases with Portland cement stabilized soils which require close programming of work. Therefore, time is of significant importance. : That is the objective of this report; to evaluate a method by which considera...

A PRIM approach to predictive-signature development for patient stratification.

PubMed

Chen, Gong; Zhong, Hua; Belousov, Anton; Devanarayan, Viswanath

2015-01-30

Patients often respond differently to a treatment because of individual heterogeneity. Failures of clinical trials can be substantially reduced if, prior to an investigational treatment, patients are stratified into responders and nonresponders based on biological or demographic characteristics. These characteristics are captured by a predictive signature. In this paper, we propose a procedure to search for predictive signatures based on the approach of patient rule induction method. Specifically, we discuss selection of a proper objective function for the search, present its algorithm, and describe a resampling scheme that can enhance search performance. Through simulations, we characterize conditions under which the procedure works well. To demonstrate practical uses of the procedure, we apply it to two real-world data sets. We also compare the results with those obtained from a recent regression-based approach, Adaptive Index Models, and discuss their respective advantages. In this study, we focus on oncology applications with survival responses. © 2014 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd.

A Calibration-Free Laser-Induced Breakdown Spectroscopy (CF-LIBS) Quantitative Analysis Method Based on the Auto-Selection of an Internal Reference Line and Optimized Estimation of Plasma Temperature.

PubMed

Yang, Jianhong; Li, Xiaomeng; Xu, Jinwu; Ma, Xianghong

2018-01-01

The quantitative analysis accuracy of calibration-free laser-induced breakdown spectroscopy (CF-LIBS) is severely affected by the self-absorption effect and estimation of plasma temperature. Herein, a CF-LIBS quantitative analysis method based on the auto-selection of internal reference line and the optimized estimation of plasma temperature is proposed. The internal reference line of each species is automatically selected from analytical lines by a programmable procedure through easily accessible parameters. Furthermore, the self-absorption effect of the internal reference line is considered during the correction procedure. To improve the analysis accuracy of CF-LIBS, the particle swarm optimization (PSO) algorithm is introduced to estimate the plasma temperature based on the calculation results from the Boltzmann plot. Thereafter, the species concentrations of a sample can be calculated according to the classical CF-LIBS method. A total of 15 certified alloy steel standard samples of known compositions and elemental weight percentages were used in the experiment. Using the proposed method, the average relative errors of Cr, Ni, and Fe calculated concentrations were 4.40%, 6.81%, and 2.29%, respectively. The quantitative results demonstrated an improvement compared with the classical CF-LIBS method and the promising potential of in situ and real-time application.

Guidelines for Professional Staff Selection. A Guide to Job Responsibilities of the School Personnel Administrator.

ERIC Educational Resources Information Center

American Association of School Personnel Administrators, Seven Hills, OH.

These guidelines are intended to provide personnel administrators with a means of evaluating their current practices and procedures in teacher selection. The guidelines cover recruitment, hiring criteria, employment interviews, and the follow-up to selection. A suggested personnel selection procedure outlines application, file preparation, and the…

48 CFR 715.370 - Alternative source selection procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Alternative source selection procedures. 715.370 Section 715.370 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Source Selection 715...

Evaluation of surgical procedure selection based on intraoperative free portal pressure measurement in patients with portal hypertension.

PubMed

Sun, Yong-Wei; Chen, Wei; Luo, Meng; Hua, Rong; Liu, Wei; Huo, Yan-Miao; Wu, Zhi-Yong; Cao, Hui

2010-06-01

Various surgical procedures can be used to treat liver cirrhosis and portal hypertension. How to select the most appropriate procedure for patients with portal hypertension has become a difficult problem. This study aimed to analyze the relationship between the value of intraoperative free portal pressure (FPP) and postoperative complications, and to explore the significance of intraoperative FPP measurement with respect to surgical procedure selection. The clinical data of 187 patients with portal hypertension who received pericardial devascularization and proximal splenorenal shunt combined with devascularization (combined operation) at the Department of General Surgery in our hospital from January 2001 to September 2008 were retrospectively analyzed. Among the patients who received pericardial devascularization, those with a postoperative FPP >or=22 mmHg were included in a high-pressure group (n=68), and those with FPP <22 mmHg were in a low-pressure group (n=49). Seventy patients who received the combined operation comprised a combined group. The intraoperative FPP measurement changes at different times, and the incidence of postoperative complications in the three groups of patients were compared. The postoperative FPP value in the high-pressure group was 27.5+/-2.3 mmHg, which was significantly higher than that of the low-pressure (20.9+/-1.8 mmHg) or combined groups (21.7+/-2.5 mmHg). The rebleeding rate in the high-pressure group was significantly higher than that in the low-pressure and combined groups. The incidence rates of postoperative hepatic encephalopathy and liver failure were not statistically different among the three groups. The mortality due to rebleeding in the low-pressure and combined groups (0.84%) was significantly lower than that of the high-pressure group. The study demonstrates that FPP is a critical measurement for surgical procedure selection in patients with portal hypertension. A FPP value >or=22 mmHg after splenectomy and devascularization alone is an important indicator that an additional proximal splenorenal shunt needs to be performed.

Evaluation of Currently Used Dental Management Indicators and Development of New Management and Performance Indicators.

DTIC Science & Technology

1981-07-01

for selected procedures g. Pericdontal Procedures Per Dentist Formula: Number of Perio Procedures Comr’.neted* Nunber of Dentists Assigned *See appendi...02336 - Resin, Complex A-2 Selected Endodontic Procedures for Endo teeth per assigned DDS ratio: 03311 - Anterior, 1 Canal Filled 03312 - Anterior, 2 or...04271 - Free Soft Tissue Graft 04272 - Vestibulo.-lasty 04340 - Perio Scale and Root Planning *Some or these procedures are not end-item entities as are

48 CFR 906.102 - Use of competitive procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... accordance with subpart 936.6 and 48 CFR subpart 36.6. (4) Program research and development announcements shall follow the competitive selection procedures for the award of research proposals in accordance with... follow the competitive selection procedures for award of these proposals in accordance with subpart 917...

Accurate cytogenetic biodosimetry through automated dicentric chromosome curation and metaphase cell selection

PubMed Central

Wilkins, Ruth; Flegal, Farrah; Knoll, Joan H.M.; Rogan, Peter K.

2017-01-01

Accurate digital image analysis of abnormal microscopic structures relies on high quality images and on minimizing the rates of false positive (FP) and negative objects in images. Cytogenetic biodosimetry detects dicentric chromosomes (DCs) that arise from exposure to ionizing radiation, and determines radiation dose received based on DC frequency. Improvements in automated DC recognition increase the accuracy of dose estimates by reclassifying FP DCs as monocentric chromosomes or chromosome fragments. We also present image segmentation methods to rank high quality digital metaphase images and eliminate suboptimal metaphase cells. A set of chromosome morphology segmentation methods selectively filtered out FP DCs arising primarily from sister chromatid separation, chromosome fragmentation, and cellular debris. This reduced FPs by an average of 55% and was highly specific to these abnormal structures (≥97.7%) in three samples. Additional filters selectively removed images with incomplete, highly overlapped, or missing metaphase cells, or with poor overall chromosome morphologies that increased FP rates. Image selection is optimized and FP DCs are minimized by combining multiple feature based segmentation filters and a novel image sorting procedure based on the known distribution of chromosome lengths. Applying the same image segmentation filtering procedures to both calibration and test samples reduced the average dose estimation error from 0.4 Gy to <0.2 Gy, obviating the need to first manually review these images. This reliable and scalable solution enables batch processing for multiple samples of unknown dose, and meets current requirements for triage radiation biodosimetry of high quality metaphase cell preparations. PMID:29026522

Model selection with multiple regression on distance matrices leads to incorrect inferences.

PubMed

Franckowiak, Ryan P; Panasci, Michael; Jarvis, Karl J; Acuña-Rodriguez, Ian S; Landguth, Erin L; Fortin, Marie-Josée; Wagner, Helene H

2017-01-01

In landscape genetics, model selection procedures based on Information Theoretic and Bayesian principles have been used with multiple regression on distance matrices (MRM) to test the relationship between multiple vectors of pairwise genetic, geographic, and environmental distance. Using Monte Carlo simulations, we examined the ability of model selection criteria based on Akaike's information criterion (AIC), its small-sample correction (AICc), and the Bayesian information criterion (BIC) to reliably rank candidate models when applied with MRM while varying the sample size. The results showed a serious problem: all three criteria exhibit a systematic bias toward selecting unnecessarily complex models containing spurious random variables and erroneously suggest a high level of support for the incorrectly ranked best model. These problems effectively increased with increasing sample size. The failure of AIC, AICc, and BIC was likely driven by the inflated sample size and different sum-of-squares partitioned by MRM, and the resulting effect on delta values. Based on these findings, we strongly discourage the continued application of AIC, AICc, and BIC for model selection with MRM.

Standards-Based Procedural Phenotyping: The Arden Syntax on i2b2.

PubMed

Mate, Sebastian; Castellanos, Ixchel; Ganslandt, Thomas; Prokosch, Hans-Ulrich; Kraus, Stefan

2017-01-01

Phenotyping, or the identification of patient cohorts, is a recurring challenge in medical informatics. While there are open source tools such as i2b2 that address this problem by providing user-friendly querying interfaces, these platforms lack semantic expressiveness to model complex phenotyping algorithms. The Arden Syntax provides procedural programming language construct, designed specifically for medical decision support and knowledge transfer. In this work, we investigate how language constructs of the Arden Syntax can be used for generic phenotyping. We implemented a prototypical tool to integrate i2b2 with an open source Arden execution environment. To demonstrate the applicability of our approach, we used the tool together with an Arden-based phenotyping algorithm to derive statistics about ICU-acquired hypernatremia. Finally, we discuss how the combination of i2b2's user-friendly cohort pre-selection and Arden's procedural expressiveness could benefit phenotyping.

Study of the Decision-Making Procedures for the Acquisition of Science Library Materials and the Relation of These Procedures to the Requirements of College and University Library Patrons.

ERIC Educational Resources Information Center

Lane, David O.

The idea that there was a need for formal study of the methods by which titles are selected for addition to the collections of academic science libraries resulted in this investigation of the selection processes of these libraries. Specifically, the study concentrates on the selection procedures in three sciences: biology, chemistry, and physics.…

Implications of the New EEOC Guidelines.

ERIC Educational Resources Information Center

Dhanens, Thomas P.

1979-01-01

In the next few years employers will frequently be confronted with the fact that they cannot rely on undocumented, subjective selection procedures. As long as disparate impact exists in employee selection, employers will be required to validate whatever selection procedures they use. (Author/IRT)

Experimental selective posterior semicircular canal laser deafferentation.

PubMed

Naguib, Maged B

2005-05-01

In this experimental study, we attempted to perform selective deafferentation of the posterior semicircular canal ampulla of guinea pigs using carbon dioxide laser beam. The results of this study document the efficacy of this procedure in achieving deafferentation of the posterior semicircular canal safely with regards to the other semicircular canals, the otolithic organ and the organ of hearing. Moreover, the procedure is performed with relative ease compared with other procedures previously described for selective deafferentation of the posterior semicircular canal. The clinical application of such a procedure for the treatment of intractable benign paroxysmal positional vertigo in humans is suggested.

Signal sequence and keyword trap in silico for selection of full-length human cDNAs encoding secretion or membrane proteins from oligo-capped cDNA libraries.

PubMed

Otsuki, Tetsuji; Ota, Toshio; Nishikawa, Tetsuo; Hayashi, Koji; Suzuki, Yutaka; Yamamoto, Jun-ichi; Wakamatsu, Ai; Kimura, Kouichi; Sakamoto, Katsuhiko; Hatano, Naoto; Kawai, Yuri; Ishii, Shizuko; Saito, Kaoru; Kojima, Shin-ichi; Sugiyama, Tomoyasu; Ono, Tetsuyoshi; Okano, Kazunori; Yoshikawa, Yoko; Aotsuka, Satoshi; Sasaki, Naokazu; Hattori, Atsushi; Okumura, Koji; Nagai, Keiichi; Sugano, Sumio; Isogai, Takao

2005-01-01

We have developed an in silico method of selection of human full-length cDNAs encoding secretion or membrane proteins from oligo-capped cDNA libraries. Fullness rates were increased to about 80% by combination of the oligo-capping method and ATGpr, software for prediction of translation start point and the coding potential. Then, using 5'-end single-pass sequences, cDNAs having the signal sequence were selected by PSORT ('signal sequence trap'). We also applied 'secretion or membrane protein-related keyword trap' based on the result of BLAST search against the SWISS-PROT database for the cDNAs which could not be selected by PSORT. Using the above procedures, 789 cDNAs were primarily selected and subjected to full-length sequencing, and 334 of these cDNAs were finally selected as novel. Most of the cDNAs (295 cDNAs: 88.3%) were predicted to encode secretion or membrane proteins. In particular, 165(80.5%) of the 205 cDNAs selected by PSORT were predicted to have signal sequences, while 70 (54.2%) of the 129 cDNAs selected by 'keyword trap' preserved the secretion or membrane protein-related keywords. Many important cDNAs were obtained, including transporters, receptors, and ligands, involved in significant cellular functions. Thus, an efficient method of selecting secretion or membrane protein-encoding cDNAs was developed by combining the above four procedures.

Probabilistic micromechanics for metal matrix composites

NASA Astrophysics Data System (ADS)

Engelstad, S. P.; Reddy, J. N.; Hopkins, Dale A.

A probabilistic micromechanics-based nonlinear analysis procedure is developed to predict and quantify the variability in the properties of high temperature metal matrix composites. Monte Carlo simulation is used to model the probabilistic distributions of the constituent level properties including fiber, matrix, and interphase properties, volume and void ratios, strengths, fiber misalignment, and nonlinear empirical parameters. The procedure predicts the resultant ply properties and quantifies their statistical scatter. Graphite copper and Silicon Carbide Titanlum Aluminide (SCS-6 TI15) unidirectional plies are considered to demonstrate the predictive capabilities. The procedure is believed to have a high potential for use in material characterization and selection to precede and assist in experimental studies of new high temperature metal matrix composites.

Development of a QFD-based expert system for CNC turning centre selection

NASA Astrophysics Data System (ADS)

Prasad, Kanika; Chakraborty, Shankar

2015-12-01

Computer numerical control (CNC) machine tools are automated devices capable of generating complicated and intricate product shapes in shorter time. Selection of the best CNC machine tool is a critical, complex and time-consuming task due to availability of a wide range of alternatives and conflicting nature of several evaluation criteria. Although, the past researchers had attempted to select the appropriate machining centres using different knowledge-based systems, mathematical models and multi-criteria decision-making methods, none of those approaches has given due importance to the voice of customers. The aforesaid limitation can be overcome using quality function deployment (QFD) technique, which is a systematic approach for integrating customers' needs and designing the product to meet those needs first time and every time. In this paper, the adopted QFD-based methodology helps in selecting CNC turning centres for a manufacturing organization, providing due importance to the voice of customers to meet their requirements. An expert system based on QFD technique is developed in Visual BASIC 6.0 to automate the CNC turning centre selection procedure for different production plans. Three illustrative examples are demonstrated to explain the real-time applicability of the developed expert system.

Guidance on Software Maintenance. Final Report. Reports on Computer Science and Technology.

ERIC Educational Resources Information Center

Martin, Roger J.; Osborne, Wilma M.

Based on informal discussions with personnel at selected federal agencies and private sector organizations and on additional research, this publication addresses issues and problems of software maintenance and suggests actions and procedures which can help software maintenance organizations meet the growing demands of maintaining existing systems.…

An Evaluation of the '72 Summer Workshop on Individualized Instruction.

ERIC Educational Resources Information Center

Mohan, Madan; Hull, Ronald E.

This report evaluated a 2-week summer workshop for 37 teachers, supervisors, and administrators involved in the study and implementation of individualized instruction programs in western New York. After a brief introduction, general objectives and planning procedures of the workshop were presented. Participation selection was based on a…

Effect of storage time and temperature of equine feces on the subsequent enumeration of lactobacilli and cellulolytic bacteria

USDA-ARS?s Scientific Manuscript database

Cellulolytic bacteria and lactobacilli are beneficial microbes in the equine hindgut. There are several existing methodologies for the enumeration of these bacteria, which vary based on selective and differential media and sample handling procedures including storage time and temperature. The object...

Selecting Evaluation Comparison Groups: A Cluster Analytic Approach.

ERIC Educational Resources Information Center

Davis, Todd Mclin; McLean, James E.

A persistent problem in the evaluation of field-based projects is the lack of no-treatment comparison groups. Frequently, potential comparison groups are confounded by socioeconomic, racial, or other factors. Among the possible methods for dealing with this problem are various matching procedures, but they are cumbersome to use with multiple…

40 CFR 761.289 - Compositing samples.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Remediation Waste and Porous Surfaces in Accordance With § 761.61(a)(6) § 761.289 Compositing samples. Compositing is a method of combining several samples of a specific type of bulk PCB remediation waste or... compositing bulk PCB remediation waste samples. These procedures are based on the method for selecting...

The Effect of Password Management Procedures on the Entropy of User Selected Passwords

ERIC Educational Resources Information Center

Enamait, John D.

2012-01-01

Maintaining the security of information contained within computer systems poses challenges for users and administrators. Attacks on information systems continue to rise. Specifically, attacks that target user authentication are increasingly popular. These attacks are based on the common perception that traditional alphanumeric passwords are weak…

Use of expert judgment elicitation to estimate seismic vulnerability of selected building types

USGS Publications Warehouse

Jaiswal, K.S.; Aspinall, W.; Perkins, D.; Wald, D.; Porter, K.A.

2012-01-01

Pooling engineering input on earthquake building vulnerability through an expert judgment elicitation process requires careful deliberation. This article provides an overview of expert judgment procedures including the Delphi approach and the Cooke performance-based method to estimate the seismic vulnerability of a building category.

Conducting a wildland visual resources inventory

Treesearch

James F. Palmer

1979-01-01

This paper describes a procedure for systematically inventorying the visual resources of wildland environments. Visual attributes are recorded photographically using two separate sampling methods: one based on professional judgment and the other on random selection. The location and description of each inventoried scene are recorded on U.S. Geological Survey...

Reliability and Validity of Curriculum-Based Informal Reading Inventories.

ERIC Educational Resources Information Center

Fuchs, Lynn; And Others

A study was conducted to explore the reliability and validity of three prominent procedures used in informal reading inventories (IRIs): (1) choosing a 95% word recognition accuracy standard for determining student instructional level, (2) arbitrarily selecting a passage to represent the difficulty level of a basal reader, and (3) employing…

Running a Successful Center: A Giant Step Forward in the Professions's Maturation.

ERIC Educational Resources Information Center

Farmer, Noel T., Jr.

1986-01-01

Based on his successful experience with the NASSP assessment center process in personnel selection and career development, a Maryland curriculum superintendent suggests that assessment center process and results need to be integrated into schools' promotional policies, their training and appraisal procedures, their human resource planning, and…

40 CFR 761.289 - Compositing samples.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Remediation Waste and Porous Surfaces in Accordance With § 761.61(a)(6) § 761.289 Compositing samples. Compositing is a method of combining several samples of a specific type of bulk PCB remediation waste or... compositing bulk PCB remediation waste samples. These procedures are based on the method for selecting...

Combining Relevance Vector Machines and exponential regression for bearing residual life estimation

NASA Astrophysics Data System (ADS)

Di Maio, Francesco; Tsui, Kwok Leung; Zio, Enrico

2012-08-01

In this paper we present a new procedure for estimating the bearing Residual Useful Life (RUL) by combining data-driven and model-based techniques. Respectively, we resort to (i) Relevance Vector Machines (RVMs) for selecting a low number of significant basis functions, called Relevant Vectors (RVs), and (ii) exponential regression to compute and continuously update residual life estimations. The combination of these techniques is developed with reference to partially degraded thrust ball bearings and tested on real world vibration-based degradation data. On the case study considered, the proposed procedure outperforms other model-based methods, with the added value of an adequate representation of the uncertainty associated to the estimates of the quantification of the credibility of the results by the Prognostic Horizon (PH) metric.

Office Operative Hysteroscopy: An Update.

PubMed

Salazar, Christina Alicia; Isaacson, Keith B

2018-02-01

Hysteroscopy is considered the gold standard for the evaluation of intracavitary pathology in both premenopausal and postmenopausal patients associated with abnormal uterine bleeding, as well as for the evaluation of infertile patients with suspected cavity abnormalities. Office-based operative hysteroscopy allows patients to resume activities immediately and successfully integrates clinical practice into a "see and treat" modality, avoiding the added risks of anesthesia and the inconvenience of the operating room. For 2017, the Centers for Medicare and Medicaid Services has provided a substantial increase in reimbursement for a select number of office-based hysteroscopic procedures. This review provides an update on the indications, equipment, and procedures for office hysteroscopy, as well as the management of complications that may arise within an office-based practice. Copyright © 2018. Published by Elsevier Inc.

[Surgery in portal hypertension. Which patient and which operation?].

PubMed

Mercado, M A; Takahashi, T; Rojas, G; Prado, E; Hernández, J; Tielve, M; Orozco, H

1993-01-01

A prospective trial of a cohort of patients (N = 94) with portal hypertension and history of bleeding was selected for surgery based on strict clinical and laboratory criteria. All of them were treated with portal blood flow preserving procedures. The following selection criteria were used: good cardiopulmonary function without pulmonary hypertension and good liver function (Child-Pugh A). All patients were operated in an elective fashion and the operations performed were: selective shunts (N = 38) (distal splenorenal and splenocaval), low diameter mesocaval shunts (N = 13) and the esophagogastric devascularization with esophageal transection (Sugiura-Futagawa) (N = 43). Patients were selected for each operation according to their anatomical conditions. Sixty-one of the patients were cirrhotics. Operative mortality was 8% and rebleeding was observed in 5% of the cases. Postoperative encephalopathy was seen in seven patients (three selective shunts, two low diameter mesocaval shunts and two devascularizations). In 13 of 62 patients postoperatively evaluated by means of angiography, portal vein thrombosis was shown (seven selective shunts, two low diameter shunts and four devascularizations). Twenty-two patients with preoperative portal vein thrombosis (and treated with a Sugiura-Futagawa operation) were excluded from postoperative angiographic evaluation. Survival (Kaplan-Meier) was 85% at 60 months. Portal blood flow preserving procedures are the treatment of choice for patients with hemorrhagic portal hypertension and good liver function. The kind of operation is selected according to the individual anatomical status of the patient.

48 CFR 570.305 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Two-phase design-build... for Leasehold Interests in Real Property 570.305 Two-phase design-build selection procedures. (a) These procedures apply to acquisitions of leasehold interests if you use the two-phase design-build...

ISC-EHB: Reconstruction of a robust earthquake dataset

NASA Astrophysics Data System (ADS)

Weston, J.; Engdahl, E. R.; Harris, J.; Di Giacomo, D.; Storchak, D. A.

2018-04-01

The EHB Bulletin of hypocentres and associated travel-time residuals was originally developed with procedures described by Engdahl, Van der Hilst and Buland (1998) and currently ends in 2008. It is a widely used seismological dataset, which is now expanded and reconstructed, partly by exploiting updated procedures at the International Seismological Centre (ISC), to produce the ISC-EHB. The reconstruction begins in the modern period (2000-2013) to which new and more rigorous procedures for event selection, data preparation, processing, and relocation are applied. The selection criteria minimise the location bias produced by unmodelled 3D Earth structure, resulting in events that are relatively well located in any given region. Depths of the selected events are significantly improved by a more comprehensive review of near station and secondary phase travel-time residuals based on ISC data, especially for the depth phases pP, pwP and sP, as well as by a rigorous review of the event depths in subduction zone cross sections. The resulting cross sections and associated maps are shown to provide details of seismicity in subduction zones in much greater detail than previously achievable. The new ISC-EHB dataset will be especially useful for global seismicity studies and high-frequency regional and global tomographic inversions.

41 CFR 60-3.2 - Scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 60-3.2 Scope. A. Application of... tests and other selection procedures which are used as a basis for any employment decision. Employment... certification may be covered by Federal equal employment opportunity law. Other selection decisions, such as...

41 CFR 60-3.2 - Scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 60-3.2 Scope. A. Application of... tests and other selection procedures which are used as a basis for any employment decision. Employment... certification may be covered by Federal equal employment opportunity law. Other selection decisions, such as...

41 CFR 60-3.2 - Scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 60-3.2 Scope. A. Application of... tests and other selection procedures which are used as a basis for any employment decision. Employment... certification may be covered by Federal equal employment opportunity law. Other selection decisions, such as...

41 CFR 60-3.2 - Scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 60-3.2 Scope. A. Application of... tests and other selection procedures which are used as a basis for any employment decision. Employment... certification may be covered by Federal equal employment opportunity law. Other selection decisions, such as...

Procedures for Selecting Items for Computerized Adaptive Tests.

ERIC Educational Resources Information Center

Kingsbury, G. Gage; Zara, Anthony R.

1989-01-01

Several classical approaches and alternative approaches to item selection for computerized adaptive testing (CAT) are reviewed and compared. The study also describes procedures for constrained CAT that may be added to classical item selection approaches to allow them to be used for applied testing. (TJH)

Virtual Reality as a Distraction Intervention to Relieve Pain and Distress During Medical Procedures: A Comprehensive Literature Review.

PubMed

Indovina, Paola; Barone, Daniela; Gallo, Luigi; Chirico, Andrea; De Pietro, Giuseppe; Antonio, Giordano

2018-02-26

This review aims to provide a framework for evaluating the utility of virtual reality (VR) as a distraction intervention to alleviate pain and distress during medical procedures. We firstly describe the theoretical bases underlying the VR analgesic and anxiolytic effects and define the main factors contributing to its efficacy, which largely emerged from studies on healthy volunteers. Then, we provide a comprehensive overview of the clinical trials using VR distraction during different medical procedures, such as burn injury treatments, chemotherapy, surgery, dental treatment, and other diagnostic and therapeutic procedures. A broad literature search was performed using as main terms "virtual reality", "distraction" and "pain". No date limit was applied and all the retrieved studies on immersive VR distraction during medical procedures were selected. VR has proven to be effective in reducing procedural pain, as almost invariably observed even in patients subjected to extremely painful procedures, such as patients with burn injuries undergoing wound care and physical therapy. Moreover, VR seemed to decrease cancer-related symptoms in different settings, including during chemotherapy. Only mild and infrequent side effects were observed. Despite these promising results, future long-term randomized controlled trials with larger sample sizes and evaluating not only self-report measures but also physiological variables are needed. Further studies are also required both to establish predictive factors to select patients who can benefit from VR distraction and to design hardware/software systems tailored to the specific needs of different patients and able to provide the greatest distraction at the lowest cost.

Restoring tactile and erogenous penile sensation in low-spinal-lesion patients: procedural and technical aspects following 43 TOMAX nerve transfer procedures.

PubMed

Overgoor, Max L E; de Jong, Tom P V M; Kon, Moshe

2014-08-01

The "TOMAX" (TO MAX-imize sensation, sexuality, and quality of life) procedure restores genital sensation in men with low spinal lesions, improving sexual health, as shown previously. It connects the dorsal nerve of the penis to the intact ipsilateral ilioinguinal nerve, unilaterally or bilaterally. This study reports on the technical aspects based on 43 TOMAX nerve transfers. In 40 patients with no penile but intact groin sensation, 43 nerve transfers were performed. Data on patient selection, surgical history, anatomy of the ilioinguinal nerve and dorsal nerve of the penis, unilateral or bilateral surgery, surgical technique, complications, and patient information were collected prospectively. Regardless of origin, all patients with no penile but good groin sensation are eligible for the procedure, provided the ilioinguinal nerve is not damaged because of former inguinal surgery or absent because of anatomical variations. Selection of a unilateral or bilateral procedure depends on the presence or absence of reflex erections and bulbocavernosus reflex. Preliminary experience with the first three bilateral cases shows that it is technically feasible, with encouraging results. The surgical technique has evolved (described in detail, including video) to enhance outcome and reduce complications. Patients are better informed, resulting in realistic expectations. This article synthesizes the procedural and technical experience of 43 TOMAX nerve transfers. Anyone skilled in peripheral nerve surgery and microsurgery can adopt this concept and further develop it. The TOMAX procedure can then be used to restore erogenous penile sensation and improve the quality of sexual health in patients with absent penile but good groin sensation.

Failure mode analysis in adrenal vein sampling: a single-center experience.

PubMed

Trerotola, Scott O; Asmar, Melissa; Yan, Yan; Fraker, Douglas L; Cohen, Debbie L

2014-10-01

To analyze failure modes in a high-volume adrenal vein sampling (AVS) practice in an effort to identify preventable causes of nondiagnostic sampling. A retrospective database was constructed containing 343 AVS procedures performed over a 10-year period. Each nondiagnostic AVS procedure was reviewed for failure mode and correlated with results of any repeat AVS. Data collected included selectivity index, lateralization index, adrenalectomy outcomes if performed, and details of AVS procedure. All AVS procedures were performed after cosyntropin stimulation, using sequential technique. AVS was nondiagnostic in 12 of 343 (3.5%) primary procedures and 2 secondary procedures. Failure was right-sided in 8 (57%) procedures, left-sided in 4 (29%) procedures, bilateral in 1 procedure, and neither in 1 procedure (laboratory error). Failure modes included diluted sample from correctly identified vein (n = 7 [50%]; 3 right and 4 left), vessel misidentified as adrenal vein (n = 3 [21%]; all right), failure to locate an adrenal vein (n = 2 [14%]; both right), cosyntropin stimulation failure (n = 1 [7%]; diagnostic by nonstimulated criteria), and laboratory error (n = 1 [7%]; specimen loss). A second AVS procedure was diagnostic in three of five cases (60%), and a third AVS procedure was diagnostic in one of one case (100%). Among the eight patients in whom AVS ultimately was not diagnostic, four underwent adrenalectomy based on diluted AVS samples, and one underwent adrenalectomy based on imaging; all five experienced improvement in aldosteronism. A substantial percentage of AVS failures occur on the left, all related to dilution. Even when technically nondiagnostic per strict criteria, some "failed" AVS procedures may be sufficient to guide therapy. Repeat AVS has a good yield. Copyright © 2014 SIR. Published by Elsevier Inc. All rights reserved.

A fuelwood plantation site selection procedure using geographic information system technology: A case study in support of the NASA Global Habitability Program

NASA Technical Reports Server (NTRS)

Roller, N. E. G.; Colwell, J. E.; Sellman, A. N.

1985-01-01

A study undertaken in support of NASA's Global Habitability Program is described. A demonstration of geographic information system (GIS) technology for site evaluation and selection is given. The objective was to locate potential fuelwood plantations within a 50 km radius of Nairobi, Kenya. A model was developed to evaluate site potential based on capability and suitability criteria and implemented using the Environmental Research Institute of Michigan's geographic information system.

Site Plan Safety Submission for Sampling, Monitoring, and Decontamination of Mustard Agent - South Plant, Rocky Mountain Arsenal. Volume 1

DTIC Science & Technology

1988-10-01

sample these ducts. This judgement was based on the following factors : 1. The ducts were open to the atmosphere. 2. RMA records of building area samples...selected based on several factors including piping arrangements, volume to be sampled, sampling equipment flow rates, and the flow rate necessary for...effective sampling. Therefore, each sampling point strategy and procedure was customized based on these factors . The individual specific sampling

Input variable selection for data-driven models of Coriolis flowmeters for two-phase flow measurement

NASA Astrophysics Data System (ADS)

Wang, Lijuan; Yan, Yong; Wang, Xue; Wang, Tao

2017-03-01

Input variable selection is an essential step in the development of data-driven models for environmental, biological and industrial applications. Through input variable selection to eliminate the irrelevant or redundant variables, a suitable subset of variables is identified as the input of a model. Meanwhile, through input variable selection the complexity of the model structure is simplified and the computational efficiency is improved. This paper describes the procedures of the input variable selection for the data-driven models for the measurement of liquid mass flowrate and gas volume fraction under two-phase flow conditions using Coriolis flowmeters. Three advanced input variable selection methods, including partial mutual information (PMI), genetic algorithm-artificial neural network (GA-ANN) and tree-based iterative input selection (IIS) are applied in this study. Typical data-driven models incorporating support vector machine (SVM) are established individually based on the input candidates resulting from the selection methods. The validity of the selection outcomes is assessed through an output performance comparison of the SVM based data-driven models and sensitivity analysis. The validation and analysis results suggest that the input variables selected from the PMI algorithm provide more effective information for the models to measure liquid mass flowrate while the IIS algorithm provides a fewer but more effective variables for the models to predict gas volume fraction.

Directed evolution of stereoselective enzymes based on genetic selection as opposed to screening systems.

PubMed

Acevedo-Rocha, Carlos G; Agudo, Ruben; Reetz, Manfred T

2014-12-10

Directed evolution of stereoselective enzymes provides a means to generate useful biocatalysts for asymmetric transformations in organic chemistry and biotechnology. Almost all of the numerous examples reported in the literature utilize high-throughput screening systems based on suitable analytical techniques. Since the screening step is the bottleneck of the overall procedure, researchers have considered the use of genetic selection systems as an alternative to screening. In principle, selection would be the most elegant and efficient approach because it is based on growth advantage of host cells harboring stereoselective mutants, but devising such selection systems is very challenging. They must be designed so that the host organism profits from the presence of an enantioselective variant. Progress in this intriguing research area is summarized in this review, which also includes some examples of display systems designed for enantioselectivity as assayed by fluorescence-activated cell sorting (FACS). Although the combination of display systems and FACS is a powerful approach, we also envision innovative ideas combining metabolic engineering and genetic selection systems with protein directed evolution for the development of highly selective and efficient biocatalysts. Copyright © 2014 Elsevier B.V. All rights reserved.

Hierarchical and successive approximate registration of the non-rigid medical image based on thin-plate splines

NASA Astrophysics Data System (ADS)

Hu, Jinyan; Li, Li; Yang, Yunfeng

2017-06-01

The hierarchical and successive approximate registration method of non-rigid medical image based on the thin-plate splines is proposed in the paper. There are two major novelties in the proposed method. First, the hierarchical registration based on Wavelet transform is used. The approximate image of Wavelet transform is selected as the registered object. Second, the successive approximation registration method is used to accomplish the non-rigid medical images registration, i.e. the local regions of the couple images are registered roughly based on the thin-plate splines, then, the current rough registration result is selected as the object to be registered in the following registration procedure. Experiments show that the proposed method is effective in the registration process of the non-rigid medical images.

Application of a trigonometric finite difference procedure to numerical analysis of compressive and shear buckling of orthotropic panels

NASA Technical Reports Server (NTRS)

Stein, M.; Housner, J. D.

1978-01-01

A numerical analysis developed for the buckling of rectangular orthotropic layered panels under combined shear and compression is described. This analysis uses a central finite difference procedure based on trigonometric functions instead of using the conventional finite differences which are based on polynomial functions. Inasmuch as the buckle mode shape is usually trigonometric in nature, the analysis using trigonometric finite differences can be made to exhibit a much faster convergence rate than that using conventional differences. Also, the trigonometric finite difference procedure leads to difference equations having the same form as conventional finite differences; thereby allowing available conventional finite difference formulations to be converted readily to trigonometric form. For two-dimensional problems, the procedure introduces two numerical parameters into the analysis. Engineering approaches for the selection of these parameters are presented and the analysis procedure is demonstrated by application to several isotropic and orthotropic panel buckling problems. Among these problems is the shear buckling of stiffened isotropic and filamentary composite panels in which the stiffener is broken. Results indicate that a break may degrade the effect of the stiffener to the extent that the panel will not carry much more load than if the stiffener were absent.

Critical Value Reporting in Transfusion Medicine

PubMed Central

Reese, Erika M.; Nelson, Randin C.; Flegel, Willy A.; Byrne, Karen M.; Booth, Garrett S.

2017-01-01

Abstract Objectives: While critical value procedures have been adopted in most areas of the clinical laboratory, their use in transfusion medicine has not been reviewed in detail. The results of this study present a comprehensive overview of critical value reporting and communication practices in transfusion medicine in the United States. Methods: A web-based survey was developed to collect data on the prevalence of critical value procedures and practices of communicating results. The survey was distributed via email to US hospital-based blood banks. Results: Of 123 facilities surveyed, 84 (68.3%) blood banks had a critical value procedure. From a panel of 23 common blood bank results, nine results were selected by more than 70% of facilities as either a critical value or requiring rapid communication as defined by an alternate procedure. Conclusions: There was overlap among results communicated by facilities with and without a critical value procedure. The most frequently communicated results, such as incompatible crossmatch for RBC units issued uncrossmatched, delay in finding compatible blood due to a clinically significant antibody, and transfusion reaction evaluation suggestive of a serious adverse event, addressed scenarios associated with the leading reported causes of transfusion-related fatalities. PMID:28371931

29 CFR 1607.7 - Use of other validity studies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 1607.7 Use of other validity studies. A. Validity studies not conducted by the user. Users may, under certain circumstances, support the use of selection... described in test manuals. While publishers of selection procedures have a professional obligation to...

29 CFR 1607.7 - Use of other validity studies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 1607.7 Use of other validity studies. A. Validity studies not conducted by the user. Users may, under certain circumstances, support the use of selection... described in test manuals. While publishers of selection procedures have a professional obligation to...

29 CFR 1607.7 - Use of other validity studies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 1607.7 Use of other validity studies. A. Validity studies not conducted by the user. Users may, under certain circumstances, support the use of selection... described in test manuals. While publishers of selection procedures have a professional obligation to...

CTEPP STANDARD OPERATING PROCEDURE FOR SAMPLE SELECTION (SOP-1.10)

EPA Science Inventory

The procedures for selecting CTEPP study subjects are described in the SOP. The primary, county-level stratification is by region and urbanicity. Six sample counties in each of the two states (North Carolina and Ohio) are selected using stratified random sampling and reflect ...

Feedback-based probabilistic category learning is selectively impaired in attention/hyperactivity deficit disorder.

PubMed

Gabay, Yafit; Goldfarb, Liat

2017-07-01

Although Attention-Deficit Hyperactivity Disorder (ADHD) is closely linked to executive function deficits, it has recently been attributed to procedural learning impairments that are quite distinct from the former. These observations challenge the ability of the executive function framework solely to account for the diverse range of symptoms observed in ADHD. A recent neurocomputational model emphasizes the role of striatal dopamine (DA) in explaining ADHD's broad range of deficits, but the link between this model and procedural learning impairments remains unclear. Significantly, feedback-based procedural learning is hypothesized to be disrupted in ADHD because of the involvement of striatal DA in this type of learning. In order to test this assumption, we employed two variants of a probabilistic category learning task known from the neuropsychological literature. Feedback-based (FB) and paired associate-based (PA) probabilistic category learning were employed in a non-medicated sample of ADHD participants and neurotypical participants. In the FB task, participants learned associations between cues and outcomes initially by guessing and subsequently through feedback indicating the correctness of the response. In the PA learning task, participants viewed the cue and its associated outcome simultaneously without receiving an overt response or corrective feedback. In both tasks, participants were trained across 150 trials. Learning was assessed in a subsequent test without a presentation of the outcome or corrective feedback. Results revealed an interesting disassociation in which ADHD participants performed as well as control participants in the PA task, but were impaired compared with the controls in the FB task. The learning curve during FB training differed between the two groups. Taken together, these results suggest that the ability to incrementally learn by feedback is selectively disrupted in ADHD participants. These results are discussed in relation to both the ADHD dopaminergic dysfunction model and recent findings implicating procedural learning impairments in those with ADHD. Copyright © 2017 Elsevier Inc. All rights reserved.

Identification of 11-Nor-delta9-tetrahydrocannabinol-9-carboxylic acid in urine by ion trap GC-MS-MS in the context of doping analysis.

PubMed

Caballero, Gerardo M; D'Angelo, Carlos; Fraguío, Mariá Sol; Centurión, Osvaldo Teme

2004-01-01

The purpose of this study is to develop a sensitive and specific alternative to current gas chromatography (GC)-mass spectrometry (MS) selected ion monitoring confirmation methods of 11-nor-delta9-tetrahydrocannabinol-9-carboxylic acid (cTHC) in human urine samples, in the context of doping analysis. An identification procedure based on the comparison, among suspicious and control samples, of the relative abundances of cTHC selected product ions obtained by GC-tandem MS in an ion trap is presented. The method complies with the identification criteria for qualitative assays established by sports authorities; the comparison procedure is precise, reproducible, specific, and sensitive, thus indicating that it is fit for the purpose of identification accordingly to World Antidoping Agency requirements.

Radiation Hardness Assurance (RHA) for Space Systems

NASA Technical Reports Server (NTRS)

Poivey, Christian; Buchner, Stephen

2007-01-01

This presentation discusses radiation hardness assurance (RHA) for space systems, providing both the programmatic aspects of RHA and the RHA procedure. RHA consists of all activities undertaken to ensure that the electronics and materials of a space system perform to their design specifications after exposure to the space radiation environment. RHA also pertains to environment definition, part selection, part testing, spacecraft layout, radiation tolerant design, and mission/system/subsystems requirements. RHA procedure consists of establishing mission requirements, defining and evaluating the radiation hazard, selecting and categorizing the appropriate parts, and evaluating circuit response to hazard. The RHA approach is based on risk management and is confined only to parts, it includes spacecraft layout, system/subsystem/circuit design, and system requirements and system operations. RHA should be taken into account in the early phases of a program including the proposal and feasibility analysis phases.

Consequences of nursing procedures measurement on job satisfaction

PubMed Central

Khademol-hoseyni, Seyyed Mohammad; Nouri, Jamileh Mokhtari; Khoshnevis, Mohammad Ali; Ebadi, Abbas

2013-01-01

Background: Job satisfaction among nurses has consequences on the quality of nursing care and accompanying organizational commitments. Nursing procedure measurement (NPM) is one of the essential parts of the performance-oriented system. This research was performed in order to determining the job satisfaction rate in selected wards of Baqiyatallah (a. s.) Hospital prior and following the NPM. Materials and Methods: An interventional research technique designed with an evaluation study approach in which job satisfaction was measured before and after NPM within 2 months in selected wards with census sampling procedure. The questionnaire contained two major parts; demographic data and questions regarding job satisfaction, salary, and fringe benefits. Data analyzed with SPSS version 13. Results: Statistical evaluation did not reveal significant difference between demographic data and satisfaction and/or dissatisfaction of nurses (before and after nursing procedures measurement). Following NPM, the rate of salary and benefits dissatisfaction decreased up to 5% and the rate of satisfaction increased about 1.5%, however the statistical tests did not reveal a significant difference. Subsequent to NPM, the rate of job value increased (P = 0.019), whereas the rate of job comfort decreased (P = 0.033) significantly. Conclusions: Measuring procedures do not affect the job satisfaction of ward staff or their salary and benefits. Therefore, it is suggested that the satisfaction measurement compute following nurses’ salary and therefore benefits adjusted based on NPM. This is our suggested approach. PMID:23983741

The effect of music on preprocedure anxiety in Hong Kong Chinese day patients.

PubMed

Lee, David; Henderson, Amanda; Shum, David

2004-03-01

To identify the effect of music on preprocedure anxiety levels of Hong Kong Chinese patients undergoing day procedures in a local community based hospital. Pre and post-test quasi experimental design with non-random assignment. A total of 113 participants were assigned to the control group or intervention group depending on the day of their procedure. Participants' anxiety levels were measured objectively by comparing their vital signs and subjectively by the Spielberger State Trait Anxiety Scale. Participants' physiological parameters (blood pressure, pulse and respiration) and State Trait Anxiety Scale were measured at two time periods. The control group undertook the usual relaxing activities provided in the waiting room compared with the intervention group who listened to music of their own choice in reclining chairs while waiting for the procedure. The physiological parameters for both the control and intervention groups dropped significantly during the waiting period, however, only the intervention group had a significant reduction in reported anxiety levels. These results suggest that providing self-selected music to day procedure patients in the preprocedure period assists in the reduction of physiological parameters and anxiety, yet, a relaxing environment can assist in the reduction of physiological parameters. The administration of self-selected music to day procedure patients in the preprocedure period can be effective in the reduction of physiological parameters and anxiety.

Consequences of nursing procedures measurement on job satisfaction.

PubMed

Khademol-Hoseyni, Seyyed Mohammad; Nouri, Jamileh Mokhtari; Khoshnevis, Mohammad Ali; Ebadi, Abbas

2013-03-01

Job satisfaction among nurses has consequences on the quality of nursing care and accompanying organizational commitments. Nursing procedure measurement (NPM) is one of the essential parts of the performance-oriented system. This research was performed in order to determining the job satisfaction rate in selected wards of Baqiyatallah (a. s.) Hospital prior and following the NPM. An interventional research technique designed with an evaluation study approach in which job satisfaction was measured before and after NPM within 2 months in selected wards with census sampling procedure. The questionnaire contained two major parts; demographic data and questions regarding job satisfaction, salary, and fringe benefits. Data analyzed with SPSS version 13. Statistical evaluation did not reveal significant difference between demographic data and satisfaction and/or dissatisfaction of nurses (before and after nursing procedures measurement). Following NPM, the rate of salary and benefits dissatisfaction decreased up to 5% and the rate of satisfaction increased about 1.5%, however the statistical tests did not reveal a significant difference. Subsequent to NPM, the rate of job value increased (P = 0.019), whereas the rate of job comfort decreased (P = 0.033) significantly. Measuring procedures do not affect the job satisfaction of ward staff or their salary and benefits. Therefore, it is suggested that the satisfaction measurement compute following nurses' salary and therefore benefits adjusted based on NPM. This is our suggested approach.

IJS procedure for RELAP5 to TRACE input model conversion using SNAP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prosek, A.; Berar, O. A.

2012-07-01

The TRAC/RELAP Advanced Computational Engine (TRACE) advanced, best-estimate reactor systems code developed by the U.S. Nuclear Regulatory Commission comes with a graphical user interface called Symbolic Nuclear Analysis Package (SNAP). Much of efforts have been done in the past to develop the RELAP5 input decks. The purpose of this study is to demonstrate the Institut 'Josef Stefan' (IJS) conversion procedure from RELAP5 to TRACE input model of BETHSY facility. The IJS conversion procedure consists of eleven steps and is based on the use of SNAP. For calculations of the selected BETHSY 6.2TC test the RELAP5/MOD3.3 Patch 4 and TRACE V5.0more » Patch 1 were used. The selected BETHSY 6.2TC test was 15.24 cm equivalent diameter horizontal cold leg break in the reference pressurized water reactor without high pressure and low pressure safety injection. The application of the IJS procedure for conversion of BETHSY input model showed that it is important to perform the steps in proper sequence. The overall calculated results obtained with TRACE using the converted RELAP5 model were close to experimental data and comparable to RELAP5/MOD3.3 calculations. Therefore it can be concluded, that proposed IJS conversion procedure was successfully demonstrated on the BETHSY integral test facility input model. (authors)« less

An enhanced performance through agent-based secure approach for mobile ad hoc networks

NASA Astrophysics Data System (ADS)

Bisen, Dhananjay; Sharma, Sanjeev

2018-01-01

This paper proposes an agent-based secure enhanced performance approach (AB-SEP) for mobile ad hoc network. In this approach, agent nodes are selected through optimal node reliability as a factor. This factor is calculated on the basis of node performance features such as degree difference, normalised distance value, energy level, mobility and optimal hello interval of node. After selection of agent nodes, a procedure of malicious behaviour detection is performed using fuzzy-based secure architecture (FBSA). To evaluate the performance of the proposed approach, comparative analysis is done with conventional schemes using performance parameters such as packet delivery ratio, throughput, total packet forwarding, network overhead, end-to-end delay and percentage of malicious detection.

A machine learning methodology for the selection and classification of spontaneous spinal cord dorsum potentials allows disclosure of structured (non-random) changes in neuronal connectivity induced by nociceptive stimulation

PubMed Central

Martin, Mario; Contreras-Hernández, Enrique; Béjar, Javier; Esposito, Gennaro; Chávez, Diógenes; Glusman, Silvio; Cortés, Ulises; Rudomin, Pablo

2015-01-01

Previous studies aimed to disclose the functional organization of the neuronal networks involved in the generation of the spontaneous cord dorsum potentials (CDPs) generated in the lumbosacral spinal segments used predetermined templates to select specific classes of spontaneous CDPs. Since this procedure was time consuming and required continuous supervision, it was limited to the analysis of two specific types of CDPs (negative CDPs and negative positive CDPs), thus excluding potentials that may reflect activation of other neuronal networks of presumed functional relevance. We now present a novel procedure based in machine learning that allows the efficient and unbiased selection of a variety of spontaneous CDPs with different shapes and amplitudes. The reliability and performance of the present method is evaluated by analyzing the effects on the probabilities of generation of different classes of spontaneous CDPs induced by the intradermic injection of small amounts of capsaicin in the anesthetized cat, a procedure known to induce a state of central sensitization leading to allodynia and hyperalgesia. The results obtained with the selection method presently described allowed detection of spontaneous CDPs with specific shapes and amplitudes that are assumed to represent the activation of functionally coupled sets of dorsal horn neurones that acquire different, structured configurations in response to nociceptive stimuli. These changes are considered as responses tending to adequate transmission of sensory information to specific functional requirements as part of homeostatic adjustments. PMID:26379540

Determining the biomass fraction of mixed waste fuels: A comparison of existing industry and {sup 14}C-based methodologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muir, G.K.P., E-mail: Graham.Muir@glasgow.ac.uk; Hayward, S.; Tripney, B.G.

2015-01-15

Highlights: • Compares industry standard and {sup 14}C methods for determining bioenergy content of MSW. • Differences quantified through study at an operational energy from waste plant. • Manual sort and selective dissolution are unreliable measures of feedstock bioenergy. • {sup 14}C methods (esp. AMS) improve precision and reliability of bioenergy determination. • Implications for electricity generators and regulators for award of bio-incentives. - Abstract: {sup 14}C analysis of flue gas by accelerator mass spectrometry (AMS) and liquid scintillation counting (LSC) were used to determine the biomass fraction of mixed waste at an operational energy-from-waste (EfW) plant. Results were convertedmore » to bioenergy (% total) using mathematical algorithms and assessed against existing industry methodologies which involve manual sorting and selective dissolution (SD) of feedstock. Simultaneous determinations using flue gas showed excellent agreement: 44.8 ± 2.7% for AMS and 44.6 ± 12.3% for LSC. Comparable bioenergy results were obtained using a feedstock manual sort procedure (41.4%), whilst a procedure based on selective dissolution of representative waste material is reported as 75.5% (no errors quoted). {sup 14}C techniques present significant advantages in data acquisition, precision and reliability for both electricity generator and industry regulator.« less

Peacekeeping. A Selected Bibliography

DTIC Science & Technology

1994-01-01

Tactics. Techniques. and Procedures. CLIC Paper. Langley Air Force Base: US Army- Air Force Center for Low Intensity Conflict, April 1989. 96pp...Organization of African Unity to Develop a Peacekeeping Capability. Research Report. Maxwell Air Force Base: US Air University, Air War College, 1990...Arab League and Peacekeeping in the Lebanon. New York: St. Martin’s Press, 1987. 214pp. (DS36.2 P64 1987) Renner , Michael. Critical Juncture: The

Operational Based Vision Assessment Cone Contrast Test: Description and Operation

DTIC Science & Technology

2016-06-02

Jun 2016. Report contains color . 14. ABSTRACT The work detailed in this report was conducted by the Operational Based Vision Assessment (OBVA...currently used by the Air Force for aircrew color vision screening. The new OBVA CCT is differentiated from the Rabin device primarily by hardware...test procedures, and analysis techniques. Like the Rabin CCT, the OBVA CCT uses colors that selectively stimulate the cone photoreceptors of the

Did we choose the best one? A new site selection approach based on exposure and uptake potential for waste incineration.

PubMed

Demirarslan, K Onur; Korucu, M Kemal; Karademir, Aykan

2016-08-01

Ecological problems arising after the construction and operation of a waste incineration plant generally originate from incorrect decisions made during the selection of the location of the plant. The main objective of this study is to investigate how the selection method for the location of a new municipal waste incineration plant can be improved by using a dispersion modelling approach supported by geographical information systems and multi-criteria decision analysis. Considering this aim, the appropriateness of the current location of an existent plant was assessed by applying a pollution dispersion model. Using this procedure, the site ranking for a total of 90 candidate locations and the site of the existing incinerator were determined by a new location selection practice and the current place of the plant was evaluated by ANOVA and Tukey tests. This ranking, made without the use of modelling approaches, was re-evaluated based on the modelling of various variables, including the concentration of pollutants, population and population density, demography, temporality of meteorological data, pollutant type, risk formation type by CALPUFF and re-ranking the results. The findings clearly indicate the impropriety of the location of the current plant, as the pollution distribution model showed that its location was the fourth-worst choice among 91 possibilities. It was concluded that the location selection procedures for waste incinerators should benefit from the improvements obtained by the articulation of pollution dispersion studies combined with the population density data to obtain the most suitable location. © The Author(s) 2016.

A New Variable Weighting and Selection Procedure for K-Means Cluster Analysis

ERIC Educational Resources Information Center

Steinley, Douglas; Brusco, Michael J.

2008-01-01

A variance-to-range ratio variable weighting procedure is proposed. We show how this weighting method is theoretically grounded in the inherent variability found in data exhibiting cluster structure. In addition, a variable selection procedure is proposed to operate in conjunction with the variable weighting technique. The performances of these…

Price adjustment for traditional Chinese medicine procedures: Based on a standardized value parity model.

PubMed

Wang, Haiyin; Jin, Chunlin; Jiang, Qingwu

2017-11-20

Traditional Chinese medicine (TCM) is an important part of China's medical system. Due to the prolonged low price of TCM procedures and the lack of an effective mechanism for dynamic price adjustment, the development of TCM has markedly lagged behind Western medicine. The World Health Organization (WHO) has emphasized the need to enhance the development of alternative and traditional medicine when creating national health care systems. The establishment of scientific and appropriate mechanisms to adjust the price of medical procedures in TCM is crucial to promoting the development of TCM. This study has examined incorporating value indicators and data on basic manpower expended, time spent, technical difficulty, and the degree of risk in the latest standards for the price of medical procedures in China, and this study also offers a price adjustment model with the relative price ratio as a key index. This study examined 144 TCM procedures and found that prices of TCM procedures were mainly based on the value of medical care provided; on average, medical care provided accounted for 89% of the price. Current price levels were generally low and the current price accounted for 56% of the standardized value of a procedure, on average. Current price levels accounted for a markedly lower standardized value of acupuncture, moxibustion, special treatment with TCM, and comprehensive TCM procedures. This study selected a total of 79 procedures and adjusted them by priority. The relationship between the price of TCM procedures and the suggested price was significantly optimized (p < 0.01). This study suggests that adjustment of the price of medical procedures based on a standardized value parity model is a scientific and suitable method of price adjustment that can serve as a reference for other provinces and municipalities in China and other countries and regions that mainly have fee-for-service (FFS) medical care.

Indices estimated using REML/BLUP and introduction of a super-trait for the selection of progenies in popcorn.

PubMed

Vittorazzi, C; Amaral Junior, A T; Guimarães, A G; Viana, A P; Silva, F H L; Pena, G F; Daher, R F; Gerhardt, I F S; Oliveira, G H F; Pereira, M G

2017-09-27

Selection indices commonly utilize economic weights, which become arbitrary genetic gains. In popcorn, this is even more evident due to the negative correlation between the main characteristics of economic importance - grain yield and popping expansion. As an option in the use of classical biometrics as a selection index, the optimal procedure restricted maximum likelihood/best linear unbiased predictor (REML/BLUP) allows the simultaneous estimation of genetic parameters and the prediction of genotypic values. Based on the mixed model methodology, the objective of this study was to investigate the comparative efficiency of eight selection indices estimated by REML/BLUP for the effective selection of superior popcorn families in the eighth intrapopulation recurrent selection cycle. We also investigated the efficiency of the inclusion of the variable "expanded popcorn volume per hectare" in the most advantageous selection of superior progenies. In total, 200 full-sib families were evaluated in two different areas in the North and Northwest regions of the State of Rio de Janeiro, Brazil. The REML/BLUP procedure resulted in higher estimated gains than those obtained with classical biometric selection index methodologies and should be incorporated into the selection of progenies. The following indices resulted in higher gains in the characteristics of greatest economic importance: the classical selection index/values attributed by trial, via REML/BLUP, and the greatest genotypic values/expanded popcorn volume per hectare, via REML. The expanded popcorn volume per hectare characteristic enabled satisfactory gains in grain yield and popping expansion; this characteristic should be considered super-trait in popcorn breeding programs.

Improved Silica-Guanidiniumthiocyanate DNA Isolation Procedure Based on Selective Binding of Bovine Alpha-Casein to Silica Particles

PubMed Central

Boom, René; Sol, Cees; Beld, Marcel; Weel, Jan; Goudsmit, Jaap; Wertheim-van Dillen, Pauline

1999-01-01

DNA purified from clinical cerebrospinal fluid and urine specimens by a silica-guanidiniumthiocyanate procedure frequently contained an inhibitor(s) of DNA-processing enzymes which may have been introduced by the purification procedure itself. Inhibition could be relieved by the use of a novel lysis buffer containing alpha-casein. When the novel lysis buffer was used, alpha-casein was bound by the silica particles in the first step of the procedure and eluted together with DNA in the last step, after which it exerted its beneficial effects for DNA-processing enzymes. In the present study we have compared the novel lysis buffer with the previously described lysis buffer with respect to double-stranded DNA yield (which was nearly 100%) and the performance of DNA-processing enzymes. PMID:9986822

29 CFR 1926.1403 - Assembly/Disassembly-selection of manufacturer or employer procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 8 2013-07-01 2013-07-01 false Assembly/Disassembly-selection of manufacturer or employer... CONSTRUCTION Cranes and Derricks in Construction § 1926.1403 Assembly/Disassembly—selection of manufacturer or... applicable to assembly and disassembly, or (b) Employer procedures for assembly and disassembly. Employer...

29 CFR 1926.1403 - Assembly/Disassembly-selection of manufacturer or employer procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 8 2012-07-01 2012-07-01 false Assembly/Disassembly-selection of manufacturer or employer... CONSTRUCTION Cranes and Derricks in Construction § 1926.1403 Assembly/Disassembly—selection of manufacturer or... applicable to assembly and disassembly, or (b) Employer procedures for assembly and disassembly. Employer...

29 CFR 1926.1403 - Assembly/Disassembly-selection of manufacturer or employer procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 8 2014-07-01 2014-07-01 false Assembly/Disassembly-selection of manufacturer or employer... CONSTRUCTION Cranes and Derricks in Construction § 1926.1403 Assembly/Disassembly—selection of manufacturer or... applicable to assembly and disassembly, or (b) Employer procedures for assembly and disassembly. Employer...

29 CFR 1926.1403 - Assembly/Disassembly-selection of manufacturer or employer procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Assembly/Disassembly-selection of manufacturer or employer... CONSTRUCTION Cranes and Derricks in Construction § 1926.1403 Assembly/Disassembly—selection of manufacturer or... applicable to assembly and disassembly, or (b) Employer procedures for assembly and disassembly. Employer...

29 CFR 1607.5 - General standards for validity studies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... experience on the job. J. Interim use of selection procedures. Users may continue the use of a selection... studies. A. Acceptable types of validity studies. For the purposes of satisfying these guidelines, users... which has an adverse impact and which selection procedure has an adverse impact, each user should...

29 CFR 1607.5 - General standards for validity studies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... experience on the job. J. Interim use of selection procedures. Users may continue the use of a selection... studies. A. Acceptable types of validity studies. For the purposes of satisfying these guidelines, users... which has an adverse impact and which selection procedure has an adverse impact, each user should...

29 CFR 1607.5 - General standards for validity studies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... experience on the job. J. Interim use of selection procedures. Users may continue the use of a selection... studies. A. Acceptable types of validity studies. For the purposes of satisfying these guidelines, users... which has an adverse impact and which selection procedure has an adverse impact, each user should...

Inverse probability weighting for covariate adjustment in randomized studies

PubMed Central

Li, Xiaochun; Li, Lingling

2013-01-01

SUMMARY Covariate adjustment in randomized clinical trials has the potential benefit of precision gain. It also has the potential pitfall of reduced objectivity as it opens the possibility of selecting “favorable” model that yields strong treatment benefit estimate. Although there is a large volume of statistical literature targeting on the first aspect, realistic solutions to enforce objective inference and improve precision are rare. As a typical randomized trial needs to accommodate many implementation issues beyond statistical considerations, maintaining the objectivity is at least as important as precision gain if not more, particularly from the perspective of the regulatory agencies. In this article, we propose a two-stage estimation procedure based on inverse probability weighting to achieve better precision without compromising objectivity. The procedure is designed in a way such that the covariate adjustment is performed before seeing the outcome, effectively reducing the possibility of selecting a “favorable” model that yields a strong intervention effect. Both theoretical and numerical properties of the estimation procedure are presented. Application of the proposed method to a real data example is presented. PMID:24038458

Inverse probability weighting for covariate adjustment in randomized studies.

PubMed

Shen, Changyu; Li, Xiaochun; Li, Lingling

2014-02-20

Covariate adjustment in randomized clinical trials has the potential benefit of precision gain. It also has the potential pitfall of reduced objectivity as it opens the possibility of selecting a 'favorable' model that yields strong treatment benefit estimate. Although there is a large volume of statistical literature targeting on the first aspect, realistic solutions to enforce objective inference and improve precision are rare. As a typical randomized trial needs to accommodate many implementation issues beyond statistical considerations, maintaining the objectivity is at least as important as precision gain if not more, particularly from the perspective of the regulatory agencies. In this article, we propose a two-stage estimation procedure based on inverse probability weighting to achieve better precision without compromising objectivity. The procedure is designed in a way such that the covariate adjustment is performed before seeing the outcome, effectively reducing the possibility of selecting a 'favorable' model that yields a strong intervention effect. Both theoretical and numerical properties of the estimation procedure are presented. Application of the proposed method to a real data example is presented. Copyright © 2013 John Wiley & Sons, Ltd.

Development and characterization of orthotropic-birefringent materials

NASA Technical Reports Server (NTRS)

Daniel, I. M.; Koller, G. M.; Niiro, T.

1984-01-01

Materials were selected and fabrication procedures developed for orthotropic birefringent materials. An epoxy resin (Maraset 658/558 system) was selected as the matrix material. Fibers obtained from style 3733 glass cloth and type 1062 glass roving were used as reinforcement. Two different fabrication procedures were used. In the first one, layers of unidirectional fibers removed from the glass cloth were stacked, impregnated with resin, bagged and cured in the autoclave at an elevated temperature. In the second procedure, the glass roving was drywound over metal frames, impregnated with resin and cured at room temperature under pressure and vacuum in an autoclave. Unidirectional, angle-ply and quasi-isotropic laminates of two thicknesses and with embedded flaws were fabricated. The matrix and the unidirectional glass/epoxy material were fully characterized. The density, fiber volume ratio, mechanical, and optical properties were determined. The fiber volume ratio was over 0.50. Birefringent properties were in good agreement with predictions based on a stress proportioning concept and also, with one exception, with properties predicted by a finite element analysis. Previously announced in STAR as N81-26183

Estimating Selected Streamflow Statistics Representative of 1930-2002 in West Virginia

USGS Publications Warehouse

Wiley, Jeffrey B.

2008-01-01

Regional equations and procedures were developed for estimating 1-, 3-, 7-, 14-, and 30-day 2-year; 1-, 3-, 7-, 14-, and 30-day 5-year; and 1-, 3-, 7-, 14-, and 30-day 10-year hydrologically based low-flow frequency values for unregulated streams in West Virginia. Regional equations and procedures also were developed for estimating the 1-day, 3-year and 4-day, 3-year biologically based low-flow frequency values; the U.S. Environmental Protection Agency harmonic-mean flows; and the 10-, 25-, 50-, 75-, and 90-percent flow-duration values. Regional equations were developed using ordinary least-squares regression using statistics from 117 U.S. Geological Survey continuous streamflow-gaging stations as dependent variables and basin characteristics as independent variables. Equations for three regions in West Virginia - North, South-Central, and Eastern Panhandle - were determined. Drainage area, precipitation, and longitude of the basin centroid are significant independent variables in one or more of the equations. Estimating procedures are presented for determining statistics at a gaging station, a partial-record station, and an ungaged location. Examples of some estimating procedures are presented.

Precise non-steady-state characterization of solid active materials with no preliminary mechanistic assumptions

DOE PAGES

Constales, Denis; Yablonsky, Gregory S.; Wang, Lucun; ...

2017-04-25

This paper presents a straightforward and user-friendly procedure for extracting a reactivity characterization of catalytic reactions on solid materials under non-steady-state conditions, particularly in temporal analysis of products (TAP) experiments. The kinetic parameters derived by this procedure can help with the development of detailed mechanistic understanding. The procedure consists of the following two major steps: 1) Three “Laplace reactivities” are first determined based on the moments of the exit flow pulse response data; 2) Depending on a select kinetic model, kinetic constants of elementary reaction steps can then be expressed as a function of reactivities and determined accordingly. In particular,more » we distinguish two calculation methods based on the availability and reliability of reactant and product data. The theoretical results are illustrated using a reverse example with given parameters as well as an experimental example of CO oxidation over a supported Au/SiO 2 catalyst. The procedure presented here provides an efficient tool for kinetic characterization of many complex chemical reactions.« less

Variables selection methods in near-infrared spectroscopy.

PubMed

Xiaobo, Zou; Jiewen, Zhao; Povey, Malcolm J W; Holmes, Mel; Hanpin, Mao

2010-05-14

Near-infrared (NIR) spectroscopy has increasingly been adopted as an analytical tool in various fields, such as the petrochemical, pharmaceutical, environmental, clinical, agricultural, food and biomedical sectors during the past 15 years. A NIR spectrum of a sample is typically measured by modern scanning instruments at hundreds of equally spaced wavelengths. The large number of spectral variables in most data sets encountered in NIR spectral chemometrics often renders the prediction of a dependent variable unreliable. Recently, considerable effort has been directed towards developing and evaluating different procedures that objectively identify variables which contribute useful information and/or eliminate variables containing mostly noise. This review focuses on the variable selection methods in NIR spectroscopy. Selection methods include some classical approaches, such as manual approach (knowledge based selection), "Univariate" and "Sequential" selection methods; sophisticated methods such as successive projections algorithm (SPA) and uninformative variable elimination (UVE), elaborate search-based strategies such as simulated annealing (SA), artificial neural networks (ANN) and genetic algorithms (GAs) and interval base algorithms such as interval partial least squares (iPLS), windows PLS and iterative PLS. Wavelength selection with B-spline, Kalman filtering, Fisher's weights and Bayesian are also mentioned. Finally, the websites of some variable selection software and toolboxes for non-commercial use are given. Copyright 2010 Elsevier B.V. All rights reserved.

5 CFR 532.215 - Establishments included in regular appropriated fund surveys.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in surveys shall be selected under standard probability sample selection procedures. In areas with... establishment list drawn under statistical sampling procedures. [55 FR 46142, Nov. 1, 1990] ...

Scaling earthquake ground motions for performance-based assessment of buildings

USGS Publications Warehouse

Huang, Y.-N.; Whittaker, A.S.; Luco, N.; Hamburger, R.O.

2011-01-01

The impact of alternate ground-motion scaling procedures on the distribution of displacement responses in simplified structural systems is investigated. Recommendations are provided for selecting and scaling ground motions for performance-based assessment of buildings. Four scaling methods are studied, namely, (1)geometric-mean scaling of pairs of ground motions, (2)spectrum matching of ground motions, (3)first-mode-period scaling to a target spectral acceleration, and (4)scaling of ground motions per the distribution of spectral demands. Data were developed by nonlinear response-history analysis of a large family of nonlinear single degree-of-freedom (SDOF) oscillators that could represent fixed-base and base-isolated structures. The advantages and disadvantages of each scaling method are discussed. The relationship between spectral shape and a ground-motion randomness parameter, is presented. A scaling procedure that explicitly considers spectral shape is proposed. ?? 2011 American Society of Civil Engineers.

Continuously Variable Rating: a new, simple and logical procedure to evaluate original scientific publications

PubMed Central

Silva, Mauricio Rocha e

2011-01-01

OBJECTIVE: Impact Factors (IF) are widely used surrogates to evaluate single articles, in spite of known shortcomings imposed by cite distribution skewness. We quantify this asymmetry and propose a simple computer-based procedure for evaluating individual articles. METHOD: (a) Analysis of symmetry. Journals clustered around nine Impact Factor points were selected from the medical “Subject Categories” in Journal Citation Reports 2010. Citable items published in 2008 were retrieved and ranked by granted citations over the Jan/2008 - Jun/2011 period. Frequency distribution of cites, normalized cumulative cites and absolute cites/decile were determined for each journal cluster. (b) Positive Predictive Value. Three arbitrarily established evaluation classes were generated: LOW (1.3≤IF<2.6); MID: (2.6≤IF<3.9); HIGH: (IF≥3.9). Positive Predictive Value for journal clusters within each class range was estimated. (c) Continuously Variable Rating. An alternative evaluation procedure is proposed to allow the rating of individually published articles in comparison to all articles published in the same journal within the same year of publication. The general guiding lines for the construction of a totally dedicated software program are delineated. RESULTS AND CONCLUSIONS: Skewness followed the Pareto Distribution for (1

Data re-arranging techniques leading to proper variable selections in high energy physics

NASA Astrophysics Data System (ADS)

Kůs, Václav; Bouř, Petr

2017-12-01

We introduce a new data based approach to homogeneity testing and variable selection carried out in high energy physics experiments, where one of the basic tasks is to test the homogeneity of weighted samples, mainly the Monte Carlo simulations (weighted) and real data measurements (unweighted). This technique is called ’data re-arranging’ and it enables variable selection performed by means of the classical statistical homogeneity tests such as Kolmogorov-Smirnov, Anderson-Darling, or Pearson’s chi-square divergence test. P-values of our variants of homogeneity tests are investigated and the empirical verification through 46 dimensional high energy particle physics data sets is accomplished under newly proposed (equiprobable) quantile binning. Particularly, the procedure of homogeneity testing is applied to re-arranged Monte Carlo samples and real DATA sets measured at the particle accelerator Tevatron in Fermilab at DØ experiment originating from top-antitop quark pair production in two decay channels (electron, muon) with 2, 3, or 4+ jets detected. Finally, the variable selections in the electron and muon channels induced by the re-arranging procedure for homogeneity testing are provided for Tevatron top-antitop quark data sets.

A Robust Adaptive Autonomous Approach to Optimal Experimental Design

NASA Astrophysics Data System (ADS)

Gu, Hairong

Experimentation is the fundamental tool of scientific inquiries to understand the laws governing the nature and human behaviors. Many complex real-world experimental scenarios, particularly in quest of prediction accuracy, often encounter difficulties to conduct experiments using an existing experimental procedure for the following two reasons. First, the existing experimental procedures require a parametric model to serve as the proxy of the latent data structure or data-generating mechanism at the beginning of an experiment. However, for those experimental scenarios of concern, a sound model is often unavailable before an experiment. Second, those experimental scenarios usually contain a large number of design variables, which potentially leads to a lengthy and costly data collection cycle. Incompetently, the existing experimental procedures are unable to optimize large-scale experiments so as to minimize the experimental length and cost. Facing the two challenges in those experimental scenarios, the aim of the present study is to develop a new experimental procedure that allows an experiment to be conducted without the assumption of a parametric model while still achieving satisfactory prediction, and performs optimization of experimental designs to improve the efficiency of an experiment. The new experimental procedure developed in the present study is named robust adaptive autonomous system (RAAS). RAAS is a procedure for sequential experiments composed of multiple experimental trials, which performs function estimation, variable selection, reverse prediction and design optimization on each trial. Directly addressing the challenges in those experimental scenarios of concern, function estimation and variable selection are performed by data-driven modeling methods to generate a predictive model from data collected during the course of an experiment, thus exempting the requirement of a parametric model at the beginning of an experiment; design optimization is performed to select experimental designs on the fly of an experiment based on their usefulness so that fewest designs are needed to reach useful inferential conclusions. Technically, function estimation is realized by Bayesian P-splines, variable selection is realized by Bayesian spike-and-slab prior, reverse prediction is realized by grid-search and design optimization is realized by the concepts of active learning. The present study demonstrated that RAAS achieves statistical robustness by making accurate predictions without the assumption of a parametric model serving as the proxy of latent data structure while the existing procedures can draw poor statistical inferences if a misspecified model is assumed; RAAS also achieves inferential efficiency by taking fewer designs to acquire useful statistical inferences than non-optimal procedures. Thus, RAAS is expected to be a principled solution to real-world experimental scenarios pursuing robust prediction and efficient experimentation.

Scoring Yes-No Vocabulary Tests: Reaction Time vs. Nonword Approaches

ERIC Educational Resources Information Center

Pellicer-Sanchez, Ana; Schmitt, Norbert

2012-01-01

Despite a number of research studies investigating the Yes-No vocabulary test format, one main question remains unanswered: What is the best scoring procedure to adjust for testee overestimation of vocabulary knowledge? Different scoring methodologies have been proposed based on the inclusion and selection of nonwords in the test. However, there…

Image processing and classification procedures for analysis of sub-decimeter imagery acquired with an unmanned aircraft over arid rangelands

USDA-ARS?s Scientific Manuscript database

Using five centimeter resolution images acquired with an unmanned aircraft system (UAS), we developed and evaluated an image processing workflow that included the integration of resolution-appropriate field sampling, feature selection, object-based image analysis, and processing approaches for UAS i...

Decision Support Systems: Applications in Statistics and Hypothesis Testing.

ERIC Educational Resources Information Center

Olsen, Christopher R.; Bozeman, William C.

1988-01-01

Discussion of the selection of appropriate statistical procedures by educators highlights a study conducted to investigate the effectiveness of decision aids in facilitating the use of appropriate statistics. Experimental groups and a control group using a printed flow chart, a computer-based decision aid, and a standard text are described. (11…

The Shell Game: Publishers, Vendors, and the Myth of the Backlist.

ERIC Educational Resources Information Center

Eaglen, Audrey

1992-01-01

Discusses problems with obtaining backlist titles of children's books, based on the experiences of the Cuyahoga County Public Library (Ohio). Types of book order lists, selection, and ordering procedures are described; and examples of out-of-stock items and fill rates for new juvenile, young adult, and adult titles are presented. (MES)

Glass sealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brow, R.K.; Kovacic, L.; Chambers, R.S.

1996-04-01

Hernetic glass sealing technologies developed for weapons component applications can be utilized for the design and manufacture of fuel cells. Design and processing of of a seal are optimized through an integrated approach based on glass composition research, finite element analysis, and sealing process definition. Glass sealing procedures are selected to accommodate the limits imposed by glass composition and predicted calculations.

Data-Based Locally Directed Evaluation of Vocational Education Programs. Component 3. Assessing Student Career Interests.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Program of Vocational Education.

Part of a system by which local education agency (LEA) personnel may evaluate secondary and postsecondary vocational education programs, this third of eight components focuses on assessment of student career interests. Procedures covered include determination of the student population to be surveyed, selection of the instrument, and discrepancy…

A Methodical Approach to the Creation, Operation, and Enhancement of a General-use Microcomputer Laboratory.

ERIC Educational Resources Information Center

Seilheimer, Steven D.

1988-01-01

Outlines procedures for developing a microcomputer laboratory for use by students in an academic organization, based on experiences at Niagara University. The four phases described include: (1) needs assessment; (2) establishment, including software and hardware selection and physical facilities; (3) operation, including staffing, maintenance,…

76 FR 51442 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change To List...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

...-Adviser has designed the following quantitative stock selection rules to make allocation decisions and to..., the Sub-Adviser's investment process is quantitative. Based on extensive historical research, the Sub... open-end fund's portfolio composition must be subject to procedures designed to prevent the use and...

Using Literature-Based Prompts To Teach Writing Competencies: Directed Reading and Writing Lessons.

ERIC Educational Resources Information Center

Gelsinger, Barry D.

Intended to help teachers integrate writing instruction with the study of literature, this teaching guide offers a philosophy of writing instruction, describes a procedure for teaching reading and writing lessons, and provides a sequence of writing skills. For various literature selections, the guide defines vocabulary, provides topic discussion…

The Colorado experience (evaluation and selection of hardware for automated, geo-based information systems)

NASA Technical Reports Server (NTRS)

Sonnenl, D.

1981-01-01

A turnkey system which gives technical assistance to legislative redistricting and state census data affiliate activities is described. The procedures followed for the acquisition of the Colorado automated census mapping system are presented. Price and performance criteria of the system were examined and the system architecture is outlined.

Face and construct validity of a computer-based virtual reality simulator for ERCP.

PubMed

Bittner, James G; Mellinger, John D; Imam, Toufic; Schade, Robert R; Macfadyen, Bruce V

2010-02-01

Currently, little evidence supports computer-based simulation for ERCP training. To determine face and construct validity of a computer-based simulator for ERCP and assess its perceived utility as a training tool. Novice and expert endoscopists completed 2 simulated ERCP cases by using the GI Mentor II. Virtual Education and Surgical Simulation Laboratory, Medical College of Georgia. Outcomes included times to complete the procedure, reach the papilla, and use fluoroscopy; attempts to cannulate the papilla, pancreatic duct, and common bile duct; and number of contrast injections and complications. Subjects assessed simulator graphics, procedural accuracy, difficulty, haptics, overall realism, and training potential. Only when performance data from cases A and B were combined did the GI Mentor II differentiate novices and experts based on times to complete the procedure, reach the papilla, and use fluoroscopy. Across skill levels, overall opinions were similar regarding graphics (moderately realistic), accuracy (similar to clinical ERCP), difficulty (similar to clinical ERCP), overall realism (moderately realistic), and haptics. Most participants (92%) claimed that the simulator has definite training potential or should be required for training. Small sample size, single institution. The GI Mentor II demonstrated construct validity for ERCP based on select metrics. Most subjects thought that the simulated graphics, procedural accuracy, and overall realism exhibit face validity. Subjects deemed it a useful training tool. Study repetition involving more participants and cases may help confirm results and establish the simulator's ability to differentiate skill levels based on ERCP-specific metrics.

Clinical recommendation for treatment planning of sinus augmentation procedures by using presurgical CAT scan images: a preliminary report.

PubMed

Kutkut, Ahmad M; Andreana, Sebastiano; Kim, Hyeong-Ll; Monaco, Edward

2011-12-01

To propose a clinical recommendation based on anatomy of maxillary sinus before sinus augmentation procedure using presurgical computerized axial tomography (CAT) scan images. CAT scan images were randomly selected from previous completed implant cases. Proposed area for the lateral window osteotomy was outlined on the panorex image of the CAT scan. Sagittal section on the CAT scan that was in the center of the outlined window was selected for sinus measurement analysis. On CAT scan, 2 lines were drawn to measure the dimensions of sinus. One line measured the horizontal width and the other line measured the vertical height. Based on the measurement data, a classification of the maxillary sinus anatomy was proposed. Narrow sinus cavity indicates favorable type anatomy in terms of bone regeneration healing and wide sinus cavity as less favorable anatomy for patient treatment planning. A narrow sinus and greater exposure to the blood supply should require shorter healing times after grafting. Conversely, wider sinus cavities and less exposure to the blood supply would require a longer healing time before implant placement.

Cryotherapy simulator for localized prostate cancer.

PubMed

Hahn, James K; Manyak, Michael J; Jin, Ge; Kim, Dongho; Rewcastle, John; Kim, Sunil; Walsh, Raymond J

2002-01-01

Cryotherapy is a treatment modality that uses a technique to selectively freeze tissue and thereby cause controlled tissue destruction. The procedure involves placement of multiple small diameter probes through the perineum into the prostate tissue at selected spatial intervals. Transrectal ultrasound is used to properly position the cylindrical probes before activation of the liquid Argon cooling element, which lowers the tissue temperature below -40 degrees Centigrade. Tissue effect is monitored by transrectal ultrasound changes as well as thermocouples placed in the tissue. The computer-based cryotherapy simulation system mimics the major surgical steps involved in the procedure. The simulated real-time ultrasound display is generated from 3-D ultrasound datasets where the interaction of the ultrasound with the instruments as well as the frozen tissue is simulated by image processing. The thermal and mechanical simulations of the tissue are done using a modified finite-difference/finite-element method optimized for real-time performance. The simulator developed is a part of a comprehensive training program, including a computer-based learning system and hands-on training program with a proctor, designed to familiarize the physician with the technique and equipment involved.

Autonomous power expert system advanced development

NASA Technical Reports Server (NTRS)

Quinn, Todd M.; Walters, Jerry L.

1991-01-01

The autonomous power expert (APEX) system is being developed at Lewis Research Center to function as a fault diagnosis advisor for a space power distribution test bed. APEX is a rule-based system capable of detecting faults and isolating the probable causes. APEX also has a justification facility to provide natural language explanations about conclusions reached during fault isolation. To help maintain the health of the power distribution system, additional capabilities were added to APEX. These capabilities allow detection and isolation of incipient faults and enable the expert system to recommend actions/procedure to correct the suspected fault conditions. New capabilities for incipient fault detection consist of storage and analysis of historical data and new user interface displays. After the cause of a fault is determined, appropriate recommended actions are selected by rule-based inferencing which provides corrective/extended test procedures. Color graphics displays and improved mouse-selectable menus were also added to provide a friendlier user interface. A discussion of APEX in general and a more detailed description of the incipient detection, recommended actions, and user interface developments during the last year are presented.

Chemical Compositions of Kinematically Selected Outer Halo Stars

NASA Astrophysics Data System (ADS)

Zhang, Lan; Ishigaki, Miho; Aoki, Wako; Zhao, Gang; Chiba, Masashi

2009-12-01

Chemical abundances of 26 metal-poor dwarfs and giants are determined from high-resolution and high signal-to-noise ratio spectra obtained with the Subaru/High Dispersion Spectrograph. The sample is selected so that most of the objects have outer-halo kinematics. Self-consistent atmospheric parameters were determined by an iterative procedure based on spectroscopic analysis. Abundances of 13 elements, including α-elements (Mg, Si, Ca, Ti), odd-Z light elements (Na, Sc), iron-peak elements (Cr, Mn, Fe, Ni, Zn), and neutron-capture elements (Y, Ba), are determined by two independent data reduction and local thermodynamic equillibrium analysis procedures, confirming the consistency of the stellar parameters and abundances results. We find a decreasing trend of [α/Fe] with increasing [Fe/H] for the range of -3.5< [Fe/H] <-1, as found by Stephens & Boesgaard. [Zn/Fe] values of most objects in our sample are slightly lower than the bulk of halo stars previously studied. These results are discussed as possible chemical properties of the outer halo in the Galaxy. Based on data collected at the Subaru Telescope, which is operated by the National Astronomical Observatory of Japan.

Method selection for sustainability assessments: The case of recovery of resources from waste water.

PubMed

Zijp, M C; Waaijers-van der Loop, S L; Heijungs, R; Broeren, M L M; Peeters, R; Van Nieuwenhuijzen, A; Shen, L; Heugens, E H W; Posthuma, L

2017-07-15

Sustainability assessments provide scientific support in decision procedures towards sustainable solutions. However, in order to contribute in identifying and choosing sustainable solutions, the sustainability assessment has to fit the decision context. Two complicating factors exist. First, different stakeholders tend to have different views on what a sustainability assessment should encompass. Second, a plethora of sustainability assessment methods exist, due to the multi-dimensional characteristic of the concept. Different methods provide other representations of sustainability. Based on a literature review, we present a protocol to facilitate method selection together with stakeholders. The protocol guides the exploration of i) the decision context, ii) the different views of stakeholders and iii) the selection of pertinent assessment methods. In addition, we present an online tool for method selection. This tool identifies assessment methods that meet the specifications obtained with the protocol, and currently contains characteristics of 30 sustainability assessment methods. The utility of the protocol and the tool are tested in a case study on the recovery of resources from domestic waste water. In several iterations, a combination of methods was selected, followed by execution of the selected sustainability assessment methods. The assessment results can be used in the first phase of the decision procedure that leads to a strategic choice for sustainable resource recovery from waste water in the Netherlands. Copyright © 2017 Elsevier Ltd. All rights reserved.

Skin lesion computational diagnosis of dermoscopic images: Ensemble models based on input feature manipulation.

PubMed

Oliveira, Roberta B; Pereira, Aledir S; Tavares, João Manuel R S

2017-10-01

The number of deaths worldwide due to melanoma has risen in recent times, in part because melanoma is the most aggressive type of skin cancer. Computational systems have been developed to assist dermatologists in early diagnosis of skin cancer, or even to monitor skin lesions. However, there still remains a challenge to improve classifiers for the diagnosis of such skin lesions. The main objective of this article is to evaluate different ensemble classification models based on input feature manipulation to diagnose skin lesions. Input feature manipulation processes are based on feature subset selections from shape properties, colour variation and texture analysis to generate diversity for the ensemble models. Three subset selection models are presented here: (1) a subset selection model based on specific feature groups, (2) a correlation-based subset selection model, and (3) a subset selection model based on feature selection algorithms. Each ensemble classification model is generated using an optimum-path forest classifier and integrated with a majority voting strategy. The proposed models were applied on a set of 1104 dermoscopic images using a cross-validation procedure. The best results were obtained by the first ensemble classification model that generates a feature subset ensemble based on specific feature groups. The skin lesion diagnosis computational system achieved 94.3% accuracy, 91.8% sensitivity and 96.7% specificity. The input feature manipulation process based on specific feature subsets generated the greatest diversity for the ensemble classification model with very promising results. Copyright © 2017 Elsevier B.V. All rights reserved.

Analogous Mechanisms of Selection and Updating in Declarative and Procedural Working Memory: Experiments and a Computational Model

ERIC Educational Resources Information Center

Oberauer, Klaus; Souza, Alessandra S.; Druey, Michel D.; Gade, Miriam

2013-01-01

The article investigates the mechanisms of selecting and updating representations in declarative and procedural working memory (WM). Declarative WM holds the objects of thought available, whereas procedural WM holds representations of what to do with these objects. Both systems consist of three embedded components: activated long-term memory, a…

Principles for selecting earthquake motions in engineering design of large dams

USGS Publications Warehouse

Krinitzsky, E.L.; Marcuson, William F.

1983-01-01

This report gives a synopsis of the various tools and techniques used in selecting earthquake ground motion parameters for large dams. It presents 18 charts giving newly developed relations for acceleration, velocity, and duration versus site earthquake intensity for near- and far-field hard and soft sites and earthquakes having magnitudes above and below 7. The material for this report is based on procedures developed at the Waterways Experiment Station. Although these procedures are suggested primarily for large dams, they may also be applicable for other facilities. Because no standard procedure exists for selecting earthquake motions in engineering design of large dams, a number of precautions are presented to guide users. The selection of earthquake motions is dependent on which one of two types of engineering analyses are performed. A pseudostatic analysis uses a coefficient usually obtained from an appropriate contour map; whereas, a dynamic analysis uses either accelerograms assigned to a site or specified respunse spectra. Each type of analysis requires significantly different input motions. All selections of design motions must allow for the lack of representative strong motion records, especially near-field motions from earthquakes of magnitude 7 and greater, as well as an enormous spread in the available data. Limited data must be projected and its spread bracketed in order to fill in the gaps and to assure that there will be no surprises. Because each site may have differing special characteristics in its geology, seismic history, attenuation, recurrence, interpreted maximum events, etc., as integrated approach gives best results. Each part of the site investigation requires a number of decisions. In some cases, the decision to use a 'least ork' approach may be suitable, simply assuming the worst of several possibilities and testing for it. Because there are no standard procedures to follow, multiple approaches are useful. For example, peak motions at a site may be obtained from several methods that involve magnitude of earthquake, distance from source, and corresponding motions; or, alternately, peak motions may be assigned from other correlations based on earthquake intensity. Various interpretations exist to account for duration, recurrence, effects of site conditions, etc. Comparison of the various interpretations can be very useful. Probabilities can be assigned; however, they can present very serious problems unless appropriate care is taken when data are extrapolated beyond their data base. In making deterministic judgments, probabilistic data can provide useful guidance in estimating the uncertainties of the decision. The selection of a design ground motion for large dams is based in the end on subjective judgments which should depend, to an important extent, on the consequences of failure. Usually, use of a design value of ground motion representing a mean plus one standard deviation of possible variation in the mean of the data puts one in a conservative position. If failure presents no hazard to life, lower values of design ground motion may be justified, providing there are cost benefits and the risk is acceptable to the owner. Where a large hazard to life exists (i.e., a dam above an urbanized area) one may wish to use values of design ground motion that approximate the very worst case. The selection of a design ground motion must be appropriate for its particular set of circumstances.

Determine the optimal carrier selection for a logistics network based on multi-commodity reliability criterion

NASA Astrophysics Data System (ADS)

Lin, Yi-Kuei; Yeh, Cheng-Ta

2013-05-01

From the perspective of supply chain management, the selected carrier plays an important role in freight delivery. This article proposes a new criterion of multi-commodity reliability and optimises the carrier selection based on such a criterion for logistics networks with routes and nodes, over which multiple commodities are delivered. Carrier selection concerns the selection of exactly one carrier to deliver freight on each route. The capacity of each carrier has several available values associated with a probability distribution, since some of a carrier's capacity may be reserved for various orders. Therefore, the logistics network, given any carrier selection, is a multi-commodity multi-state logistics network. Multi-commodity reliability is defined as a probability that the logistics network can satisfy a customer's demand for various commodities, and is a performance indicator for freight delivery. To solve this problem, this study proposes an optimisation algorithm that integrates genetic algorithm, minimal paths and Recursive Sum of Disjoint Products. A practical example in which multi-sized LCD monitors are delivered from China to Germany is considered to illustrate the solution procedure.

Effect of preparation procedures on catalytic activity and selectivity of copper-based mixed oxides in selective catalytic oxidation of ammonia into nitrogen and water vapour

NASA Astrophysics Data System (ADS)

Jabłońska, Magdalena; Nocuń, Marek; Gołąbek, Kinga; Palkovits, Regina

2017-11-01

The selective oxidation of ammonia into nitrogen and water vapour (NH3-SCO) was studied over Cu-Mg(Zn)-Al-(Zr) mixed metal oxides, obtained by coprecipitation and their subsequent calcination. The effect of acid-base properties of Cu-Mg-Al-Ox on catalytic activity was investigated by changing the Mg/Al molar ratio. Other Cu-containing oxides were prepared by rehydration of calcined Mg-Al hydrotalcite-like compounds or thermal decomposition of metal nitrate precursors. XRD, BET, NH3-TPD, H2-TPR, XPS, FTIR with adsorption of pyridine and CO as well as TEM techniques were used for catalysts characterization. The results of catalytic tests revealed a crucial role of easily reducible highly dispersed copper oxide species to obtain enhanced activity and N2 selectivity in NH3-SCO. The selective catalytic reduction of NO by NH3 (NH3-SCR) and in situ DRIFT of NH3 sorption indicated that NH3-SCO proceeds according to the internal selective catalytic reduction mechanism (i-SCR).

PredPPCrys: accurate prediction of sequence cloning, protein production, purification and crystallization propensity from protein sequences using multi-step heterogeneous feature fusion and selection.

PubMed

Wang, Huilin; Wang, Mingjun; Tan, Hao; Li, Yuan; Zhang, Ziding; Song, Jiangning

2014-01-01

X-ray crystallography is the primary approach to solve the three-dimensional structure of a protein. However, a major bottleneck of this method is the failure of multi-step experimental procedures to yield diffraction-quality crystals, including sequence cloning, protein material production, purification, crystallization and ultimately, structural determination. Accordingly, prediction of the propensity of a protein to successfully undergo these experimental procedures based on the protein sequence may help narrow down laborious experimental efforts and facilitate target selection. A number of bioinformatics methods based on protein sequence information have been developed for this purpose. However, our knowledge on the important determinants of propensity for a protein sequence to produce high diffraction-quality crystals remains largely incomplete. In practice, most of the existing methods display poorer performance when evaluated on larger and updated datasets. To address this problem, we constructed an up-to-date dataset as the benchmark, and subsequently developed a new approach termed 'PredPPCrys' using the support vector machine (SVM). Using a comprehensive set of multifaceted sequence-derived features in combination with a novel multi-step feature selection strategy, we identified and characterized the relative importance and contribution of each feature type to the prediction performance of five individual experimental steps required for successful crystallization. The resulting optimal candidate features were used as inputs to build the first-level SVM predictor (PredPPCrys I). Next, prediction outputs of PredPPCrys I were used as the input to build second-level SVM classifiers (PredPPCrys II), which led to significantly enhanced prediction performance. Benchmarking experiments indicated that our PredPPCrys method outperforms most existing procedures on both up-to-date and previous datasets. In addition, the predicted crystallization targets of currently non-crystallizable proteins were provided as compendium data, which are anticipated to facilitate target selection and design for the worldwide structural genomics consortium. PredPPCrys is freely available at http://www.structbioinfor.org/PredPPCrys.

Designated Airworthiness Representatives Qualification Criteria, Selection, and Appointment Procedures -- FAA Order 8000.62

DOT National Transportation Integrated Search

1985-10-01

This order contains qualification criteria and procedures for the selection and appointment of Designated Airworthiness Representatives (DAR's) to perform certain certification functions as representatives of the Administrator.

Development of Benchmark Examples for Quasi-Static Delamination Propagation and Fatigue Growth Predictions

NASA Technical Reports Server (NTRS)

Krueger, Ronald

2012-01-01

The development of benchmark examples for quasi-static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for Abaqus/Standard. The example is based on a finite element model of a Double-Cantilever Beam specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, a quasi-static benchmark example was created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with choosing the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall the results are encouraging, but further assessment for mixed-mode delamination is required.

Development of Benchmark Examples for Static Delamination Propagation and Fatigue Growth Predictions

NASA Technical Reports Server (NTRS)

Kruger, Ronald

2011-01-01

The development of benchmark examples for static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for a commercial code. The example is based on a finite element model of an End-Notched Flexure (ENF) specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, static benchmark examples were created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during stable delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall, the results are encouraging but further assessment for mixed-mode delamination is required.

Development and Application of Benchmark Examples for Mode II Static Delamination Propagation and Fatigue Growth Predictions

NASA Technical Reports Server (NTRS)

Krueger, Ronald

2011-01-01

The development of benchmark examples for static delamination propagation and cyclic delamination onset and growth prediction is presented and demonstrated for a commercial code. The example is based on a finite element model of an End-Notched Flexure (ENF) specimen. The example is independent of the analysis software used and allows the assessment of the automated delamination propagation, onset and growth prediction capabilities in commercial finite element codes based on the virtual crack closure technique (VCCT). First, static benchmark examples were created for the specimen. Second, based on the static results, benchmark examples for cyclic delamination growth were created. Third, the load-displacement relationship from a propagation analysis and the benchmark results were compared, and good agreement could be achieved by selecting the appropriate input parameters. Fourth, starting from an initially straight front, the delamination was allowed to grow under cyclic loading. The number of cycles to delamination onset and the number of cycles during delamination growth for each growth increment were obtained from the automated analysis and compared to the benchmark examples. Again, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. The benchmarking procedure proved valuable by highlighting the issues associated with choosing the input parameters of the particular implementation. Selecting the appropriate input parameters, however, was not straightforward and often required an iterative procedure. Overall the results are encouraging, but further assessment for mixed-mode delamination is required.

Two-dimensional solid-phase extraction strategy for the selective enrichment of aminoglycosides in milk.

PubMed

Shen, Aijin; Wei, Jie; Yan, Jingyu; Jin, Gaowa; Ding, Junjie; Yang, Bingcheng; Guo, Zhimou; Zhang, Feifang; Liang, Xinmiao

2017-03-01

An orthogonal two-dimensional solid-phase extraction strategy was established for the selective enrichment of three aminoglycosides including spectinomycin, streptomycin, and dihydrostreptomycin in milk. A reversed-phase liquid chromatography material (C 18 ) and a weak cation-exchange material (TGA) were integrated in a single solid-phase extraction cartridge. The feasibility of two-dimensional clean-up procedure that experienced two-step adsorption, two-step rinsing, and two-step elution was systematically investigated. Based on the orthogonality of reversed-phase and weak cation-exchange procedures, the two-dimensional solid-phase extraction strategy could minimize the interference from the hydrophobic matrix existing in traditional reversed-phase solid-phase extraction. In addition, high ionic strength in the extracts could be effectively removed before the second dimension of weak cation-exchange solid-phase extraction. Combined with liquid chromatography and tandem mass spectrometry, the optimized procedure was validated according to the European Union Commission directive 2002/657/EC. A good performance was achieved in terms of linearity, recovery, precision, decision limit, and detection capability in milk. Finally, the optimized two-dimensional clean-up procedure incorporated with liquid chromatography and tandem mass spectrometry was successfully applied to the rapid monitoring of aminoglycoside residues in milk. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Projected financial impact of noncoverage of elective circumcision by Louisiana medicaid in boys 0 to 5 years old.

PubMed

Ortenberg, Joseph; Roth, Christopher C

2013-10-01

Several states, including Louisiana since 2005, no longer cover elective circumcision under Medicaid programs. The recent AAP (American Academy of Pediatrics) policy statement recognizes the medical benefits of circumcision and recommends the removal of financial barriers to this procedure. Cost savings are a factor in the limitation of circumcision coverage, although to our knowledge the actual cost savings to Medicaid programs have not been reported. We analyzed the number of circumcisions performed before and after the policy change to determine an accurate cost of such procedures and whether the increased procedure expense mitigates the initial savings. We analyzed the number of neonatal and nonneonatal circumcisions in boys 0 to 5 years old to determine trends during the selected period. A cost model for each procedure was created. Neonatal procedure cost was based on professional fees. Nonneonatal procedure cost was based on professional (surgeon and anesthesia) plus facility fees. The number and cost of procedures were compared before (2002 to 2004) and after (2006 to 2010) the policy change. Linear regression was used to predict future costs. The average annual number and expense of neonatal circumcisions were significantly decreased after the policy change. There was no significant decrease in nonneonatal procedures and expense. Cost per procedure ranged from $88.34 for neonatal to $486.76 for nonneonatal circumcision. Secondary to the increasing number of more costly nonneonatal procedures, the annual expense was predicted to exceed pre-policy levels by 2015. The number of nonneonatal circumcisions is increasing and such procedures place a higher financial burden on the health care system. As a result, the financial benefits of noncoverage of elective circumcision are decreasing. Copyright © 2013 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Who Should Become a Teacher? Current Student Selection-Retention Policies of Teacher Education Institutions.

ERIC Educational Resources Information Center

Brubaker, Harold A.

This study (1) describes student selection and retention procedures currently used by North Central Association colleges and universities which are accredited by the National Council for the Accreditation of Teacher Education, and (2) determines student selection and retention procedures which administrators of teacher education programs at the…

A Multi-Site Study on Medical School Selection, Performance, Motivation and Engagement

ERIC Educational Resources Information Center

Wouters, A.; Croiset, G.; Schripsema, N. R.; Cohen-Schotanus, J.; Spaai, G. W.; Hulsman, R. L.; Kusurkar, R. A.

2017-01-01

Medical schools seek ways to improve their admissions strategies, since the available methods prove to be suboptimal for selecting the best and most motivated students. In this multi-site cross-sectional questionnaire study, we examined the value of (different) selection procedures compared to a weighted lottery procedure, which includes direct…

Policy, Guidelines, and Procedures for the Selection and Classification of Provincially Authorized Learning Resources. Revised.

ERIC Educational Resources Information Center

Adamson, Martin; And Others

Intended for use by curriculum committees or individuals charged with responsibility for the selection of provincially authorized learning resources, this document contains guidelines and procedures intended to serve as minimum standard requirements for the provincial evaluation and selection of learning resources. Learning resources are defined…

Minimum Sample Size Requirements for Mokken Scale Analysis

ERIC Educational Resources Information Center

Straat, J. Hendrik; van der Ark, L. Andries; Sijtsma, Klaas

2014-01-01

An automated item selection procedure in Mokken scale analysis partitions a set of items into one or more Mokken scales, if the data allow. Two algorithms are available that pursue the same goal of selecting Mokken scales of maximum length: Mokken's original automated item selection procedure (AISP) and a genetic algorithm (GA). Minimum…

47 CFR 22.131 - Procedures for mutually exclusive applications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... excluded by that grant, pursuant to § 1.945 of this chapter. (1) Selection methods. In selecting the... under § 1.945 of this chapter, either before or after employing selection procedures. (3) Type of filing... Commission may attempt to resolve the mutual exclusivity by facilitating a settlement between the applicants...

ANGIOGRAPHIC ANATOMY OF THE MAJOR ABDOMINAL ARTERIAL BLOOD SUPPLY IN THE DOG.

PubMed

Culp, William T N; Mayhew, Philipp D; Pascoe, Peter J; Zwingenberger, Allison

2015-01-01

Vascular-based interventional radiology (IR) procedures are being more regularly performed in veterinary patients for both diagnostic and therapeutic purposes. A complete description of the fluoroscopic arterial anatomy of the canine abdominal cavity has not been published. This information is essential for performance of IR procedures to allow for improved preparation before and during a particular procedure. The primary purpose of this study was to provide a fluoroscopic description of the vascular branching from the abdominal aorta in a ventro-dorsal projection with a secondary goal of producing pictorial reference images of the major abdominal arterial blood vessels. Five healthy female hound type dogs were enrolled and underwent fluoroscopic arteriography. During fluoroscopy, both nonselective and selective arteriography were performed. The nonselective arteriograms were obtained in the aorta at four locations: cranial to the celiac artery, cranial to the renal arteries, cranial to the caudal mesenteric artery, and cranial to the branching of the external iliac arteries. Selective arteriography was conducted by performing injections into the following arteries: celiac, splenic, common hepatic, cranial mesenteric, left and right renal, and caudal mesenteric. Fluoroscopic arteriography allowed for excellent characterization of the aortic ostia and the location of the lower order vascular branches. Future evaluation of vascular-based treatment options will likely increase as the understanding of the normal and pathologic anatomy improves. © 2015 American College of Veterinary Radiology.

Self-motion perception: assessment by computer-generated animations

NASA Technical Reports Server (NTRS)

Parker, D. E.; Harm, D. L.; Sandoz, G. R.; Skinner, N. C.

1998-01-01

The goal of this research is more precise description of adaptation to sensory rearrangements, including microgravity, by development of improved procedures for assessing spatial orientation perception. Thirty-six subjects reported perceived self-motion following exposure to complex inertial-visual motion. Twelve subjects were assigned to each of 3 perceptual reporting procedures: (a) animation movie selection, (b) written report selection and (c) verbal report generation. The question addressed was: do reports produced by these procedures differ with respect to complexity and reliability? Following repeated (within-day and across-day) exposures to 4 different "motion profiles," subjects either (a) selected movies presented on a laptop computer, or (b) selected written descriptions from a booklet, or (c) generated self-motion verbal descriptions that corresponded most closely with their motion experience. One "complexity" and 2 reliability "scores" were calculated. Contrary to expectations, reliability and complexity scores were essentially equivalent for the animation movie selection and written report selection procedures. Verbal report generation subjects exhibited less complexity than did subjects in the other conditions and their reports were often ambiguous. The results suggest that, when selecting from carefully written descriptions and following appropriate training, people may be better able to describe their self-motion experience with words than is usually believed.

Experimental Verification of Buffet Calculation Procedure Using Unsteady PSP

NASA Technical Reports Server (NTRS)

Panda, Jayanta

2016-01-01

Typically a limited number of dynamic pressure sensors are employed to determine the unsteady aerodynamic forces on large, slender aerospace structures. The estimated forces are known to be very sensitive to the number of the dynamic pressure sensors and the details of the integration scheme. This report describes a robust calculation procedure, based on frequency-specific correlation lengths, that is found to produce good estimation of fluctuating forces from a few dynamic pressure sensors. The validation test was conducted on a flat panel, placed on the floor of a wind tunnel, and was subjected to vortex shedding from a rectangular bluff-body. The panel was coated with fast response Pressure Sensitive Paint (PSP), which allowed time-resolved measurements of unsteady pressure fluctuations on a dense grid of spatial points. The first part of the report describes the detail procedure used to analyze the high-speed, PSP camera images. The procedure includes steps to reduce contamination by electronic shot noise, correction for spatial non-uniformities, and lamp brightness variation, and finally conversion of fluctuating light intensity to fluctuating pressure. The latter involved applying calibration constants from a few dynamic pressure sensors placed at selective points on the plate. Excellent comparison in the spectra, coherence and phase, calculated via PSP and dynamic pressure sensors validated the PSP processing steps. The second part of the report describes the buffet validation process, for which the first step was to use pressure histories from all PSP points to determine the "true" force fluctuations. In the next step only a selected number of pixels were chosen as "virtual sensors" and a correlation-length based buffet calculation procedure was applied to determine "modeled" force fluctuations. By progressively decreasing the number of virtual sensors it was observed that the present calculation procedure was able to make a close estimate of the "true" unsteady forces only from four sensors. It is believed that the present work provides the first validation of the buffet calculation procedure which has been used for the development of many space vehicles.

Chem-Braze Abradable Seal Attachment to Aircraft Gas Turbine Compressor Components.

DTIC Science & Technology

1982-01-01

seals to compressor blade tip-shrouds using the im- proved Chem-Braze system compared to attachment with gold-nickel braze. The Chem-Braze system has been...used successfully to bond abradable seals to titanium ’ cobalt, nickel and iron base alloys; however, attempts to use Chem-Braze to bond seals to...attaching FELTMETALO seals to steel, titanium , and nickel-based alloys, and ICB bonding procedures were investigated for attaching seals to selected

Bypass Ratio: The US Air Force and Light-Attack Aviation

DTIC Science & Technology

2013-06-01

for making recommendations which optimize base activity and its impact on the environment. Local and state politics can keep a base open even if it is...for the region, and this conduct can affect global commerce. Such disruption and destabilization in turn can have large impacts on the US diplomatic... IFR ) operations, emergency procedures, low-level flight and two-ship formation flight by this stage. Once track selection occurs, the light-attack

A comparison of various modes of liquid-liquid based microextraction techniques: determination of picric acid.

PubMed

Burdel, Martin; Šandrejová, Jana; Balogh, Ioseph S; Vishnikin, Andriy; Andruch, Vasil

2013-03-01

Three modes of liquid-liquid based microextraction techniques--namely auxiliary solvent-assisted dispersive liquid-liquid microextraction, auxiliary solvent-assisted dispersive liquid-liquid microextraction with low-solvent consumption, and ultrasound-assisted emulsification microextraction--were compared. Picric acid was used as the model analyte. The determination is based on the reaction of picric acid with Astra Phloxine reagent to produce an ion associate easily extractable by various organic solvents, followed by spectrophotometric detection at 558 nm. Each of the compared procedures has both advantages and disadvantages. The main benefit of ultrasound-assisted emulsification microextraction is that no hazardous chlorinated extraction solvents and no dispersive solvent are necessary. Therefore, this procedure was selected for validation. Under optimized experimental conditions (pH 3, 7 × 10(-5) mol/L of Astra Phloxine, and 100 μL of toluene), the calibration plot was linear in the range of 0.02-0.14 mg/L and the LOD was 7 μg/L of picric acid. The developed procedure was applied to the analysis of spiked water samples. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Neonatal physical therapy. Part II: Practice frameworks and evidence-based practice guidelines.

PubMed

Sweeney, Jane K; Heriza, Carolyn B; Blanchard, Yvette; Dusing, Stacey C

2010-01-01

(1) To outline frameworks for neonatal physical therapy based on 3 theoretical models, (2) to describe emerging literature supporting neonatal physical therapy practice, and (3) to identify evidence-based practice recommendations. Three models are presented as a framework for neonatal practice: (1) dynamic systems theory including synactive theory and the theory of neuronal group selection, (2) the International Classification of Functioning, Disability and Health, and (3) family-centered care. Literature is summarized to support neonatal physical therapists in the areas of examination, developmental care, intervention, and parent education. Practice recommendations are offered with levels of evidence identified. Neonatal physical therapy practice has a theoretical and evidence-based structure, and evidence is emerging for selected clinical procedures. Continued research to expand the science of neonatal physical therapy is critical to elevate the evidence and support practice recommendations.

Toward optimal feature and time segment selection by divergence method for EEG signals classification.

PubMed

Wang, Jie; Feng, Zuren; Lu, Na; Luo, Jing

2018-06-01

Feature selection plays an important role in the field of EEG signals based motor imagery pattern classification. It is a process that aims to select an optimal feature subset from the original set. Two significant advantages involved are: lowering the computational burden so as to speed up the learning procedure and removing redundant and irrelevant features so as to improve the classification performance. Therefore, feature selection is widely employed in the classification of EEG signals in practical brain-computer interface systems. In this paper, we present a novel statistical model to select the optimal feature subset based on the Kullback-Leibler divergence measure, and automatically select the optimal subject-specific time segment. The proposed method comprises four successive stages: a broad frequency band filtering and common spatial pattern enhancement as preprocessing, features extraction by autoregressive model and log-variance, the Kullback-Leibler divergence based optimal feature and time segment selection and linear discriminate analysis classification. More importantly, this paper provides a potential framework for combining other feature extraction models and classification algorithms with the proposed method for EEG signals classification. Experiments on single-trial EEG signals from two public competition datasets not only demonstrate that the proposed method is effective in selecting discriminative features and time segment, but also show that the proposed method yields relatively better classification results in comparison with other competitive methods. Copyright © 2018 Elsevier Ltd. All rights reserved.

On the performance of tests for the detection of signatures of selection: a case study with the Spanish autochthonous beef cattle populations.

PubMed

González-Rodríguez, Aldemar; Munilla, Sebastián; Mouresan, Elena F; Cañas-Álvarez, Jhon J; Díaz, Clara; Piedrafita, Jesús; Altarriba, Juan; Baro, Jesús Á; Molina, Antonio; Varona, Luis

2016-10-28

Procedures for the detection of signatures of selection can be classified according to the source of information they use to reject the null hypothesis of absence of selection. Three main groups of tests can be identified that are based on: (1) the analysis of the site frequency spectrum, (2) the study of the extension of the linkage disequilibrium across the length of the haplotypes that surround the polymorphism, and (3) the differentiation among populations. The aim of this study was to compare the performance of a subset of these procedures by using a dataset on seven Spanish autochthonous beef cattle populations. Analysis of the correlations between the logarithms of the statistics that were obtained by 11 tests for detecting signatures of selection at each single nucleotide polymorphism confirmed that they can be clustered into the three main groups mentioned above. A factor analysis summarized the results of the 11 tests into three canonical axes that were each associated with one of the three groups. Moreover, the signatures of selection identified with the first and second groups of tests were shared across populations, whereas those with the third group were more breed-specific. Nevertheless, an enrichment analysis identified the metabolic pathways that were associated with each group; they coincided with canonical axes and were related to immune response, muscle development, protein biosynthesis, skin and pigmentation, glucose metabolism, fat metabolism, embryogenesis and morphology, heart and uterine metabolism, regulation of the hypothalamic-pituitary-thyroid axis, hormonal, cellular cycle, cell signaling and extracellular receptors. We show that the results of the procedures used to identify signals of selection differed substantially between the three groups of tests. However, they can be classified using a factor analysis. Moreover, each canonical factor that coincided with a group of tests identified different signals of selection, which could be attributed to processes of selection that occurred at different evolutionary times. Nevertheless, the metabolic pathways that were associated with each group of tests were similar, which suggests that the selection events that occurred during the evolutionary history of the populations probably affected the same group of traits.

Relay discovery and selection for large-scale P2P streaming

PubMed Central

Zhang, Chengwei; Wang, Angela Yunxian

2017-01-01

In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS), can only achieve a coarse estimation of peers’ network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used “best-out-of-K” selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT). When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs. PMID:28410384

Relay discovery and selection for large-scale P2P streaming.

PubMed

Zhang, Chengwei; Wang, Angela Yunxian; Hei, Xiaojun

2017-01-01

In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS), can only achieve a coarse estimation of peers' network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used "best-out-of-K" selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT). When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs.

Basis Selection for Wavelet Regression

NASA Technical Reports Server (NTRS)

Wheeler, Kevin R.; Lau, Sonie (Technical Monitor)

1998-01-01

A wavelet basis selection procedure is presented for wavelet regression. Both the basis and the threshold are selected using cross-validation. The method includes the capability of incorporating prior knowledge on the smoothness (or shape of the basis functions) into the basis selection procedure. The results of the method are demonstrated on sampled functions widely used in the wavelet regression literature. The results of the method are contrasted with other published methods.

Comparison of Right and Left Upper Limb Arterial Variants in Patients Undergoing Bilateral Transradial Procedures.

PubMed

Burzotta, Francesco; Brancati, Marta Francesca; Porto, Italo; Saffioti, Silvia; Aurigemma, Cristina; Niccoli, Giampaolo; Leone, Antonio Maria; Coluccia, Valentina; Crea, Filippo; Trani, Carlo

2015-12-01

Transradial approach (TRA), when compared with transfemoral, improves the safety of percutaneous coronary procedures. Arterial axis variants are known to hinder the performance of transradial approach percutaneous coronary procedures. Data on the occurrence of arterial axis variants in the right and left arm arterial axes of individual patients are lacking. From a single-center prospective registry, we selected all patients in whom bilateral upper limb arterial anatomy was assessed based on the performance of left and right radial catheterization obtained during the same or during repeat coronary diagnostic or interventional procedure(s). The occurrence of upper right and left limb arterial axis variants was classified according to the previously described operative ABC classification. A total of 610 patients were identified. An ABC upper limb arterial axis variant was detected in 156 (25.6%) patients. Variants were right-sided only in 65 (11.0%), left-sided only in 40 (6.6%), and bilateral in 46 (7.5%) patients. Thus, arterial axis variants were significantly more common in the right side (P=0.02). Bilateral arterial variants were significantly associated with age, female sex, and valvulopathy. Both A (radial/brachial) and B (axillary/subclavian/innominate) variants exhibited concordance across the 2 sides (odds ratio, 7.2; 95% confidence interval, 4.1-12.7 and 8.0; 95% confidence interval, 2.1-30.9, respectively). The occurrence of an anatomic variant potentially hindering transradial approach coronary diagnostic or interventional procedures is bilateral in <8% of cases and is more common in the right arm. Such information may guide, during the clinical practice, the access selection in the case of repeat procedures or need for additional accesses. © 2015 American Heart Association, Inc.

The Effect of Radiation on Selected Photographic Film

NASA Technical Reports Server (NTRS)

Slater, Richard; Kinard, John; Firsov, Ivan

2000-01-01

We conducted this film test to evaluate several manufacturers' photographic films for their ability to acquire imagery on the International Space Station. We selected 25 motion picture, photographic slide, and negative films from three different film manufacturers. We based this selection on the fact that their films ranked highest in other similar film tests, and on their general acceptance by the international community. This test differed from previous tests because the entire evaluation process leading up to the final selection was based on information derived after the original flight film was scanned to a digital file. Previously conducted tests were evaluated entirely based on 8 x 10s that were produced from the film either directly or through the internegative process. This new evaluation procedure provided accurate quantitative data on granularity and contrast from the digital data. This test did not try to define which film was best visually. This is too often based on personal preference. However, the test results did group the films by good, marginal, and unacceptable. We developed, and included in this report, a template containing quantitative, graphical, and visual information for each film. These templates should be sufficient for comparing the different films tested and subsequently selecting a film or films to be used for experiments and general documentation on the International Space Station.

Detection of Nitrogen Content in Rubber Leaves Using Near-Infrared (NIR) Spectroscopy with Correlation-Based Successive Projections Algorithm (SPA).

PubMed

Tang, Rongnian; Chen, Xupeng; Li, Chuang

2018-05-01

Near-infrared spectroscopy is an efficient, low-cost technology that has potential as an accurate method in detecting the nitrogen content of natural rubber leaves. Successive projections algorithm (SPA) is a widely used variable selection method for multivariate calibration, which uses projection operations to select a variable subset with minimum multi-collinearity. However, due to the fluctuation of correlation between variables, high collinearity may still exist in non-adjacent variables of subset obtained by basic SPA. Based on analysis to the correlation matrix of the spectra data, this paper proposed a correlation-based SPA (CB-SPA) to apply the successive projections algorithm in regions with consistent correlation. The result shows that CB-SPA can select variable subsets with more valuable variables and less multi-collinearity. Meanwhile, models established by the CB-SPA subset outperform basic SPA subsets in predicting nitrogen content in terms of both cross-validation and external prediction. Moreover, CB-SPA is assured to be more efficient, for the time cost in its selection procedure is one-twelfth that of the basic SPA.

A new selective enrichment procedure for isolating Pasteurella multocida from avian and environmental samples

USGS Publications Warehouse

Moore, M.K.; Cicnjak-Chubbs, L.; Gates, R.J.

1994-01-01

A selective enrichment procedure, using two new selective media, was developed to isolate Pasteurella multocida from wild birds and environmental samples. These media were developed by testing 15 selective agents with six isolates of P. multocida from wild avian origin and seven other bacteria representing genera frequently found in environmental and avian samples. The resulting media—Pasteurella multocida selective enrichment broth and Pasteurella multocida selective agar—consisted of a blood agar medium at pH 10 containing gentamicin, potassium tellurite, and amphotericin B. Media were tested to determine: 1) selectivity when attempting isolation from pond water and avian carcasses, 2) sensitivity for detection of low numbers of P. multocida from pure and mixed cultures, 3) host range specificity of the media, and 4) performance compared with standard blood agar. With the new selective enrichment procedure, P. multocida was isolated from inoculated (60 organisms/ml) pond water 84% of the time, whereas when standard blood agar was used, the recovery rate was 0%.

Guidelines for testing and release procedures

NASA Technical Reports Server (NTRS)

Molari, R.; Conway, M.

1984-01-01

Guidelines and procedures are recommended for the testing and release of the types of computer software efforts commonly performed at NASA/Ames Research Center. All recommendations are based on the premise that testing and release activities must be specifically selected for the environment, size, and purpose of each individual software project. Guidelines are presented for building a Test Plan and using formal Test Plan and Test Care Inspections on it. Frequent references are made to NASA/Ames Guidelines for Software Inspections. Guidelines are presented for selecting an Overall Test Approach and for each of the four main phases of testing: (1) Unit Testing of Components, (2) Integration Testing of Components, (3) System Integration Testing, and (4) Acceptance Testing. Tools used for testing are listed, including those available from operating systems used at Ames, specialized tools which can be developed, unit test drivers, stub module generators, and the use of format test reporting schemes.

Selective determination of aloin in different matrices by HPTLC densitometry in fluorescence mode.

PubMed

Coran, Silvia A; Bartolucci, Gianluca; Bambagiotti-Alberti, Massimo

2011-01-25

A novel method based on the fluorescence excited solely on aloin by a H₃BO₃ derivatizing procedure, allowed its rapid and selective determination among the co-occurring components in a variety of complex matrices as several Aloes dried extracts and related commercial products. HPTLC LiChrospher silica gel 60 F254S, 20 cm x 10 cm, plates with ethyl formate: CH₃OH:H₂O (100:14.5:10, v/v) as the mobile phase were used. Densitometric determinations were performed in fluorescence mode, exciting wavelength 365 nm, optical filter K540 after derivatization with H₃BO₃. The method was validated giving rise to a dependable and high throughput procedure well suited to routine application. Aloin was quantified in the range of 110-330 ng with RSD of repeatability and intermediate precision not exceeding 2.3% and accuracy inside the acceptance limits. Copyright © 2010 Elsevier B.V. All rights reserved.

Radiant Heat Transfer Between Nongray Parallel Plates of Tungsten

NASA Technical Reports Server (NTRS)

Branstetter, J. Robert

1961-01-01

Net radiant heat flow between two infinite, parallel, tungsten plates was computed by summing the monochromatic energy exchange; the results are graphically presented as a function of the temperatures of the two surfaces. In general these fluxes range from approximately a to 25 percent greater than the results of gray-body computations based on the same emissivity data. The selection of spectral emissivity data and the computational procedure are discussed. The present analytical procedure is so arranged that, as spectral emissivity data for a material become available, these data can be readily introduced into the NASA data-reduction equipment, which has been programmed to compute the net heat flux for the particular geometry and basic assumptions cited in the text. Nongray-body computational techniques for determining radiant heat flux appear practical provided the combination of select spectral emissivity data and the proper mechanized data-reduction equipment are brought to bear on the problem.

49 CFR 542.1 - Procedures for selecting new light duty truck lines that are likely to have high or low theft rates.

Code of Federal Regulations, 2010 CFR

2010-10-01

... lines that are likely to have high or low theft rates. 542.1 Section 542.1 Transportation Other... OF TRANSPORTATION PROCEDURES FOR SELECTING LIGHT DUTY TRUCK LINES TO BE COVERED BY THE THEFT... or low theft rates. (a) Scope. This section sets forth the procedures for motor vehicle manufacturers...

Parent-Implemented Procedural Modification of Escape Extinction in the Treatment of Food Selectivity in a Young Child with Autism

ERIC Educational Resources Information Center

Tarbox, Jonathan; Schiff, Averil; Najdowski, Adel C.

2010-01-01

Fool selectivity is characterized by the consumption of an inadequate variety of foods. The effectiveness of behavioral treatment procedures, particularly nonremoval of the spoon, is well validated by research. The role of parents in the treatment of feeding disorders and the feasibility of behavioral procedures for parent implementation in the…

Introducing the fit-criteria assessment plot - A visualisation tool to assist class enumeration in group-based trajectory modelling.

PubMed

Klijn, Sven L; Weijenberg, Matty P; Lemmens, Paul; van den Brandt, Piet A; Lima Passos, Valéria

2017-10-01

Background and objective Group-based trajectory modelling is a model-based clustering technique applied for the identification of latent patterns of temporal changes. Despite its manifold applications in clinical and health sciences, potential problems of the model selection procedure are often overlooked. The choice of the number of latent trajectories (class-enumeration), for instance, is to a large degree based on statistical criteria that are not fail-safe. Moreover, the process as a whole is not transparent. To facilitate class enumeration, we introduce a graphical summary display of several fit and model adequacy criteria, the fit-criteria assessment plot. Methods An R-code that accepts universal data input is presented. The programme condenses relevant group-based trajectory modelling output information of model fit indices in automated graphical displays. Examples based on real and simulated data are provided to illustrate, assess and validate fit-criteria assessment plot's utility. Results Fit-criteria assessment plot provides an overview of fit criteria on a single page, placing users in an informed position to make a decision. Fit-criteria assessment plot does not automatically select the most appropriate model but eases the model assessment procedure. Conclusions Fit-criteria assessment plot is an exploratory, visualisation tool that can be employed to assist decisions in the initial and decisive phase of group-based trajectory modelling analysis. Considering group-based trajectory modelling's widespread resonance in medical and epidemiological sciences, a more comprehensive, easily interpretable and transparent display of the iterative process of class enumeration may foster group-based trajectory modelling's adequate use.

Semisupervised Clustering by Iterative Partition and Regression with Neuroscience Applications

PubMed Central

Qian, Guoqi; Wu, Yuehua; Ferrari, Davide; Qiao, Puxue; Hollande, Frédéric

2016-01-01

Regression clustering is a mixture of unsupervised and supervised statistical learning and data mining method which is found in a wide range of applications including artificial intelligence and neuroscience. It performs unsupervised learning when it clusters the data according to their respective unobserved regression hyperplanes. The method also performs supervised learning when it fits regression hyperplanes to the corresponding data clusters. Applying regression clustering in practice requires means of determining the underlying number of clusters in the data, finding the cluster label of each data point, and estimating the regression coefficients of the model. In this paper, we review the estimation and selection issues in regression clustering with regard to the least squares and robust statistical methods. We also provide a model selection based technique to determine the number of regression clusters underlying the data. We further develop a computing procedure for regression clustering estimation and selection. Finally, simulation studies are presented for assessing the procedure, together with analyzing a real data set on RGB cell marking in neuroscience to illustrate and interpret the method. PMID:27212939

Precision-engineering the Pseudomonas aeruginosa genome with two-step allelic exchange

PubMed Central

Hmelo, Laura R.; Borlee, Bradley R.; Almblad, Henrik; Love, Michelle E.; Randall, Trevor E.; Tseng, Boo Shan; Lin, Chuyang; Irie, Yasuhiko; Storek, Kelly M.; Yang, Jaeun Jane; Siehnel, Richard J.; Howell, P. Lynne; Singh, Pradeep K.; Tolker-Nielsen, Tim; Parsek, Matthew R.; Schweizer, Herbert P.; Harrison, Joe J.

2016-01-01

Allelic exchange is an efficient method of bacterial genome engineering. This protocol describes the use of this technique to make gene knockouts and knockins, as well as single nucleotide insertions, deletions and substitutions in Pseudomonas aeruginosa. Unlike other approaches to allelic exchange, this protocol does not require heterologous recombinases to insert or excise selective markers from the target chromosome. Rather, positive and negative selection are enabled solely by suicide vector-encoded functions and host cell proteins. Here, mutant alleles, which are flanked by regions of homology to the recipient chromosome, are synthesized in vitro and then cloned into allelic exchange vectors using standard procedures. These suicide vectors are then introduced into recipient cells by conjugation. Homologous recombination then results in antibiotic resistant single-crossover mutants in which the plasmid has integrated site-specifically into the chromosome. Subsequently, unmarked double-crossover mutants are isolated directly using sucrose-mediated counter-selection. This two-step process yields seamless mutations that are precise to a single base pair of DNA. The entire procedure requires ~2 weeks. PMID:26492139

What influences perceptions of procedural justice among people with mental illness regarding their interactions with the police?

PubMed

Livingston, James D; Desmarais, Sarah L; Greaves, Caroline; Parent, Richard; Verdun-Jones, Simon; Brink, Johann

2014-04-01

According to procedural justice theory, a central factor shaping perceptions about authority figures and dispute resolution processes is whether an individual believes they were treated justly and fairly during personal encounters with agents of authority. This paper describes findings from a community-based participatory research study examining perceptions of procedural justice among sixty people with mental illness regarding their interactions with police. The degree to which these perceptions were associated with selected individual (e.g., socio-demographic characteristics), contextual (e.g., neighborhood, past experiences), and interactional (e.g., actions of the officer) factors was explored. The results of regression analyses indicate that the behavior of police officers during the interactions appears to be the key to whether or not these interactions are perceived by people with mental illness as being procedurally just. Implications of these findings for improving interactions between the police and people with mental illness are discussed.

Comparison of inert-gas-fusion and modified Kjeldahl techniques for determination of nitrogen in niobium alloys

NASA Technical Reports Server (NTRS)

Merkle, E. J.; Graab, J. W.; Davis, W. F.

1974-01-01

This report compares results obtained for the determination of nitrogen in a selected group of niobium-base alloys by the inert-gas-fusion and the Kjeldahl procedures. In the inert-gas-fusion procedure the sample is heated to approximately 2700 C in a helium atmosphere in a single-use graphite crucible. A platinum flux is used to facilitate melting of the sample. The Kjeldahl method consisted of a rapid decomposition with a mixture of hydrofluoric acid, phosphoric acid, and potassium chromate; distillation in the presence of sodium hydroxide; and highly sensitive spectrophotometry with nitroprusside-catalyzed indophenol. In the 30- to 80-ppm range, the relative standard deviation was 5 to 7 percent for the inert-gas-fusion procedure and 2 to 8 percent for the Kjeldahl procedure. The agreement of the nitrogen results obtained by the two techniques is considered satisfactory.

40 CFR 761.355 - Third level of sample selection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of sample selection further reduces the size of the subsample to 100 grams which is suitable for the... procedures in § 761.353 of this part into 100 gram portions. (b) Use a random number generator or random number table to select one 100 gram size portion as a sample for a procedure used to simulate leachate...

40 CFR 761.355 - Third level of sample selection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... of sample selection further reduces the size of the subsample to 100 grams which is suitable for the... procedures in § 761.353 of this part into 100 gram portions. (b) Use a random number generator or random number table to select one 100 gram size portion as a sample for a procedure used to simulate leachate...

40 CFR 761.355 - Third level of sample selection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... of sample selection further reduces the size of the subsample to 100 grams which is suitable for the... procedures in § 761.353 of this part into 100 gram portions. (b) Use a random number generator or random number table to select one 100 gram size portion as a sample for a procedure used to simulate leachate...

40 CFR 761.355 - Third level of sample selection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of sample selection further reduces the size of the subsample to 100 grams which is suitable for the... procedures in § 761.353 of this part into 100 gram portions. (b) Use a random number generator or random number table to select one 100 gram size portion as a sample for a procedure used to simulate leachate...

40 CFR 761.355 - Third level of sample selection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of sample selection further reduces the size of the subsample to 100 grams which is suitable for the... procedures in § 761.353 of this part into 100 gram portions. (b) Use a random number generator or random number table to select one 100 gram size portion as a sample for a procedure used to simulate leachate...

Designing Recycled Hot Mix Asphalt Mixtures Using Superpave Technology

DOT National Transportation Integrated Search

1997-01-01

Mix design procedures for recycled asphalt pavements require the selection of : virgin asphalt binder or recycling agent. This research project was undertaken : to develop a procedure for selecting the performance grade (PG) of virgin : asphalt binde...

Instructional Aides.

ERIC Educational Resources Information Center

Nielsen, Earl T.

This monograph is designed to assist administrative school personnel in selecting, training, and retaining the best qualified instructional aides available. It covers five areas: (1) employment procedures--outlining important points under recruitment, applications, examinations, interviews, and selection; (2) payroll procedures--outlining how to…

CORRELATION PURSUIT: FORWARD STEPWISE VARIABLE SELECTION FOR INDEX MODELS

PubMed Central

Zhong, Wenxuan; Zhang, Tingting; Zhu, Yu; Liu, Jun S.

2012-01-01

In this article, a stepwise procedure, correlation pursuit (COP), is developed for variable selection under the sufficient dimension reduction framework, in which the response variable Y is influenced by the predictors X1, X2, …, Xp through an unknown function of a few linear combinations of them. Unlike linear stepwise regression, COP does not impose a special form of relationship (such as linear) between the response variable and the predictor variables. The COP procedure selects variables that attain the maximum correlation between the transformed response and the linear combination of the variables. Various asymptotic properties of the COP procedure are established, and in particular, its variable selection performance under diverging number of predictors and sample size has been investigated. The excellent empirical performance of the COP procedure in comparison with existing methods are demonstrated by both extensive simulation studies and a real example in functional genomics. PMID:23243388

Desing of Digital Calliper for Control of Selected Parameters of Railway Wheels

NASA Astrophysics Data System (ADS)

Ticha, Šarka; Zelnak, Michal; Vavrina, Jan

2014-12-01

This contribution deals with new design of digital calliper for transferring of width dimension scale from the ring interface to tyre of railway wheel. Based on the problem definition were solved variants of design with possibility of improvement current measurement technique. For selected variant of production was developed calibration procedures for ensure of required accuracy. At the end solution that was significantly influenced by economic recession was realized variant for single production. Manufacturer and exclusive supplier of this digital calliper is UNIMETRA Company, Ltd.

"Nanorust"-catalyzed benign oxidation of amines for selective synthesis of nitriles.

PubMed

Jagadeesh, Rajenahally V; Junge, Henrik; Beller, Matthias

2015-01-01

Organic nitriles constitute key precursors and central intermediates in organic synthesis. In addition, nitriles represent a versatile motif found in numerous medicinally and biologically important compounds. Generally, these nitriles are synthesized by traditional cyanation procedures using toxic cyanides. Herein, we report the selective and environmentally benign oxidative conversion of primary amines for the synthesis of structurally diverse aromatic, aliphatic and heterocyclic nitriles using a reusable "nanorust" (nanoscale Fe2 O3 )-based catalysts applying molecular oxygen. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Applications of mutant yeast strains with low glycogen storage capability

NASA Technical Reports Server (NTRS)

Petersen, G. R.; Schubert, W. W.; Stokes, B. O.

1981-01-01

Several strains of Hansenula polymorpha were selected for possible low glycogen storage characteristics based on a selective I2 staining procedure. The levels of storage carbohydrates in the mutant strains were found to be 44-70% of the levels in the parent strain for cultures harvested in stationary phase. Similar differences generally were not found for cells harvested in exponential phase. Yeast strains deficient in glycogen storage capability are valuable in increasing the relative protein value of microbial biomass and also may provide significant cost savings in substrate utilization in fermentative processes.

Optimizing Travel Time to Outpatient Interventional Radiology Procedures in a Multi-Site Hospital System Using a Google Maps Application.

PubMed

Mandel, Jacob E; Morel-Ovalle, Louis; Boas, Franz E; Ziv, Etay; Yarmohammadi, Hooman; Deipolyi, Amy; Mohabir, Heeralall R; Erinjeri, Joseph P

2018-02-20

The purpose of this study is to determine whether a custom Google Maps application can optimize site selection when scheduling outpatient interventional radiology (IR) procedures within a multi-site hospital system. The Google Maps for Business Application Programming Interface (API) was used to develop an internal web application that uses real-time traffic data to determine estimated travel time (ETT; minutes) and estimated travel distance (ETD; miles) from a patient's home to each a nearby IR facility in our hospital system. Hypothetical patient home addresses based on the 33 cities comprising our institution's catchment area were used to determine the optimal IR site for hypothetical patients traveling from each city based on real-time traffic conditions. For 10/33 (30%) cities, there was discordance between the optimal IR site based on ETT and the optimal IR site based on ETD at non-rush hour time or rush hour time. By choosing to travel to an IR site based on ETT rather than ETD, patients from discordant cities were predicted to save an average of 7.29 min during non-rush hour (p = 0.03), and 28.80 min during rush hour (p < 0.001). Using a custom Google Maps application to schedule outpatients for IR procedures can effectively reduce patient travel time when more than one location providing IR procedures is available within the same hospital system.

Diagnostic procedures for non-small-cell lung cancer (NSCLC): recommendations of the European Expert Group

PubMed Central

Dietel, Manfred; Bubendorf, Lukas; Dingemans, Anne-Marie C; Dooms, Christophe; Elmberger, Göran; García, Rosa Calero; Kerr, Keith M; Lim, Eric; López-Ríos, Fernando; Thunnissen, Erik; Van Schil, Paul E; von Laffert, Maximilian

2016-01-01

Background There is currently no Europe-wide consensus on the appropriate preanalytical measures and workflow to optimise procedures for tissue-based molecular testing of non-small-cell lung cancer (NSCLC). To address this, a group of lung cancer experts (see list of authors) convened to discuss and propose standard operating procedures (SOPs) for NSCLC. Methods Based on earlier meetings and scientific expertise on lung cancer, a multidisciplinary group meeting was aligned. The aim was to include all relevant aspects concerning NSCLC diagnosis. After careful consideration, the following topics were selected and each was reviewed by the experts: surgical resection and sampling; biopsy procedures for analysis; preanalytical and other variables affecting quality of tissue; tissue conservation; testing procedures for epidermal growth factor receptor, anaplastic lymphoma kinase and ROS proto-oncogene 1, receptor tyrosine kinase (ROS1) in lung tissue and cytological specimens; as well as standardised reporting and quality control (QC). Finally, an optimal workflow was described. Results Suggested optimal procedures and workflows are discussed in detail. The broad consensus was that the complex workflow presented can only be executed effectively by an interdisciplinary approach using a well-trained team. Conclusions To optimise diagnosis and treatment of patients with NSCLC, it is essential to establish SOPs that are adaptable to the local situation. In addition, a continuous QC system and a local multidisciplinary tumour-type-oriented board are essential. PMID:26530085

Time-saving and fail-safe dissection method for vestibulocochlear organs in gross anatomy classes.

PubMed

Suzuki, Ryoji; Konno, Naoaki; Ishizawa, Akimitsu; Kanatsu, Yoshinori; Funakoshi, Kodai; Akashi, Hideo; Zhou, Ming; Abe, Hiroshi

2017-09-01

Because the vestibulocochlear organs are tiny and complex, and are covered by the petrous part of the temporal bone, they are very difficult for medical students to dissect and visualize during gross anatomy classes. Here, we report a time-saving and fail-safe procedure we have devised, using a hand-held hobby router. Nine en bloc temporal bone samples from donated human cadavers were used as trial materials for devising an appropriate procedure for dissecting the vestibulocochlear organs. A hand-held hobby router was used to cut through the temporal bone. After trials, the most time-saving and fail-safe method was selected. The performance of the selected method was assessed by a survey of 242 sides of 121 cadavers during gross anatomy classes for vestibulocochlear dissection. The assessment was based on the observation ratio. The best procedure appeared to be removal of the external acoustic meatus roof and tympanic cavity roof together with removal of the internal acoustic meatus roof. The whole procedure was completed within two dissection classes, each lasting 4.5 hr. The ratio of surveillance for the chorda tympani and three semicircular canals by students was significantly improved during 2013 through 2016. In our dissection class, "removal of the external acoustic meatus roof and tympanic cavity roof together with removal of the internal acoustic meatus roof" was the best procedure for students in the limited time available. Clin. Anat. 30:703-710, 2017. © 2017Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Guide for mass prophylaxis of hospital employees in preparation for a bioterrorist attack.

PubMed

Lee, Jeremy John; Johnson, Shannon John; Sohmer, Michael J

2009-03-15

The key elements required for the health-system pharmacist to prepare and implement a hospital-based mass prophylaxis distribution effort for hospital employees are described. A bioterrorist attack may involve multiple jurisdictions which would necessitate a regional response. Pharmacists should collaborate not only with colleagues in their immediate areas, but also with pharmacists and emergency-management planners in neighboring counties and jurisdictions. Pharmacists must also develop antibiotic drug selection protocols and define the quantity needed to maintain hospital operations after a bioterrorist attack. Once the desired antibiotics have been selected and the number of employees has been determined, along with the length of prophylaxis therapy, it should be determined how much money will be needed to purchase and store enough medications to meet the need. Next, provisions must be made to acquire and store the antibiotic cache, with attention paid to cache rotation and packaging and repackaging recommendations. A detailed procedure for the deployment of an antibiotic cache must be developed. This procedure should include job descriptions and job action sheets for deployment team members and plans for receiving and dispensing antibiotics from the Strategic National Stockpile. Once the employee prophylaxis procedure is developed, staff must be educated about it, and exercises should be conducted to identify possible weaknesses in the procedure. Health-system pharmacists should play an active role in designing and implementing an antibiotic prophylaxis plan for employees for a potential bioterrorist attack. Understanding and following procedures provided in the tool kit are critical to their successful readiness.

Building a computer program to support children, parents, and distraction during healthcare procedures.

PubMed

Hanrahan, Kirsten; McCarthy, Ann Marie; Kleiber, Charmaine; Ataman, Kaan; Street, W Nick; Zimmerman, M Bridget; Ersig, Anne L

2012-10-01

This secondary data analysis used data mining methods to develop predictive models of child risk for distress during a healthcare procedure. Data used came from a study that predicted factors associated with children's responses to an intravenous catheter insertion while parents provided distraction coaching. From the 255 items used in the primary study, 44 predictive items were identified through automatic feature selection and used to build support vector machine regression models. Models were validated using multiple cross-validation tests and by comparing variables identified as explanatory in the traditional versus support vector machine regression. Rule-based approaches were applied to the model outputs to identify overall risk for distress. A decision tree was then applied to evidence-based instructions for tailoring distraction to characteristics and preferences of the parent and child. The resulting decision support computer application, titled Children, Parents and Distraction, is being used in research. Future use will support practitioners in deciding the level and type of distraction intervention needed by a child undergoing a healthcare procedure.

Selection, de-selection and progression in German football talent promotion.

PubMed

Güllich, Arne

2014-01-01

This study explored to which extent the development of German professional football players is based on early talent identification (TID) and long-term nurture in talent promotion (TP) programmes or on their emergence in the course of repeated procedures of player selection and de-selection in these programmes through childhood and youth. The annual turnover of squad members in national junior teams (2001-2013) and youth elite academies was calculated; national U-team members were followed up with regard to nominations through subsequent seasons and to their success level eventually achieved at senior age; and all current Bundesliga players were analysed retrospectively regarding their earlier involvement in TID/TP programmes. Analyses revealed that the mean annual turnover of squad members was 24.5% (youth academies) and 41.0% (national U-teams), respectively. At any age, the probability of persisting in the programme three years later was <50%. Among current Bundesliga players, the age of recruitment into the TID/TP programme was widely evenly distributed across childhood and youth, respectively. Accordingly, the number of (future) Bundesliga players who were involved in TID/TP was built up continuously through all age categories. The observations suggest that the collective of professional players emerged from repeated procedures of selection and de-selection through childhood and youth rather than from early selection and long-term continuous nurture in TID/TP programmes. The findings are discussed with regard to the uncertainty of TID and of interventions applied to the selected players, and they are related to the individualistic and collectivistic approach in TP.

Application of Shuttle EVA Systems to Payloads. Volume 2: Payload EVA Task Completion Plans

NASA Technical Reports Server (NTRS)

1976-01-01

Candidate payload tasks for EVA application were identified and selected, based on an analysis of four representative space shuttle payloads, and typical EVA scenarios with supporting crew timelines and procedures were developed. The EVA preparations and post EVA operations, as well as the timelines emphasizing concurrent payload support functions, were also summarized.

Development of dry coal feeders

NASA Technical Reports Server (NTRS)

Bonin, J. H.; Cantey, D. E.; Daniel, A. D., Jr.; Meyer, J. W.

1977-01-01

Design and fabrication of equipment of feed coal into pressurized environments were investigated. Concepts were selected based on feeder system performance and economic projections. These systems include: two approaches using rotating components, a gas or steam driven ejector, and a modified standpipe feeder concept. Results of development testing of critical components, design procedures, and performance prediction techniques are reviewed.

Texas School Survey of Substance Abuse: Grades 7-12. 1992.

ERIC Educational Resources Information Center

Liu, Liang Y.; Fredlund, Eric V.

The 1992 Texas School Survey results for secondary students are based on data collected from a sample of 73,073 students in grades 7 through 12. Students were randomly selected from school districts throughout the state using a multi-stage probability design. The procedure ensured that students living in metropolitan and rural areas of Texas are…

Effect of Content Knowledge on Angoff-Style Standard Setting Judgments

ERIC Educational Resources Information Center

Margolis, Melissa J.; Mee, Janet; Clauser, Brian E.; Winward, Marcia; Clauser, Jerome C.

2016-01-01

Evidence to support the credibility of standard setting procedures is a critical part of the validity argument for decisions made based on tests that are used for classification. One area in which there has been limited empirical study is the impact of standard setting judge selection on the resulting cut score. One important issue related to…

Changing Patterns in Internal Communication in Large Academic Libraries. Occasional Paper Number 6.

ERIC Educational Resources Information Center

Euster, Joanne R.

Based on data from a 1979 survey of ARL member libraries, this study by the Office of Management Studies analyzes the responses of selected libraries which had provided internal studies or planning documents on the subject of internal communication and notes the extent of resulting changes in procedures. The studies yielded information on staff…

An Analytical Chemistry Experiment in Simultaneous Spectrophotometric Determination of Fe(III) and Cu(II) with Hexacyanoruthenate(II) Reagent.

ERIC Educational Resources Information Center

Mehra, M. C.; Rioux, J.

1982-01-01

Experimental procedures, typical observations, and results for the simultaneous analysis of Fe(III) and Cu(II) in a solution are discussed. The method is based on selective interaction between the two ions and potassium hexacyanoruthenate(II) in acid solution involving no preliminary sample preparations. (Author/JN)

Hexeneuronic acid content of chemical pulp

Treesearch

Junyong Zhu; X.S. Chai

2007-01-01

This method describes a procedure to determine hexeneuronic acid groups (HexA) in chemical pulps. HexA affects the kappa number determination by reaction with permanganate, and can react with certain bleaching chemicals, e.g. chlorine dioxide and ozone, but not with some others such as oxygen and peroxide. The method is based on the highly selective hydrolysis of HexA...

Look over There! Unilateral Gaze Increases Geographical Memory of the 50 United States

ERIC Educational Resources Information Center

Propper, Ruth E.; Brunye, Tad T.; Christman, Stephen D.; Januszewskia, Ashley

2012-01-01

Based on their specialized processing abilities, the left and right hemispheres of the brain may not contribute equally to recall of general world knowledge. US college students recalled the verbal names and spatial locations of the 50 US states while sustaining leftward or rightward unilateral gaze, a procedure that selectively activates the…

Cable Television: The Process of Franchising.

ERIC Educational Resources Information Center

Johnson, Leland L.; Botein, Michael

In an effort to insure that cable television franchising procedures at the local level are based on a competitive and well-conceived selection process, this report discusses some of the most important steps of the franchising process. Not only does it show how the community should assess its needs and appraise the merits of the cable operator, but…

A safe, effective, and facility compatible cleaning in place procedure for affinity resin in large-scale monoclonal antibody purification.

PubMed

Wang, Lu; Dembecki, Jill; Jaffe, Neil E; O'Mara, Brian W; Cai, Hui; Sparks, Colleen N; Zhang, Jian; Laino, Sarah G; Russell, Reb J; Wang, Michelle

2013-09-20

Cleaning-in-place (CIP) for column chromatography plays an important role in therapeutic protein production. A robust and efficient CIP procedure ensures product quality, improves column life time and reduces the cost of the purification processes, particularly for those using expensive affinity resins, such as MabSelect protein A resin. Cleaning efficiency, resin compatibility, and facility compatibility are the three major aspects to consider in CIP process design. Cleaning MabSelect resin with 50mM sodium hydroxide (NaOH) along with 1M sodium chloride is one of the most popular cleaning procedures used in biopharmaceutical industries. However, high concentration sodium chloride is a leading cause of corrosion in the stainless steel containers used in large scale manufacture. Corroded containers may potentially introduce metal contaminants into purified drug products. Therefore, it is challenging to apply this cleaning procedure into commercial manufacturing due to facility compatibility and drug safety concerns. This paper reports a safe, effective and environmental and facility-friendly cleaning procedure that is suitable for large scale affinity chromatography. An alternative salt (sodium sulfate) is used to prevent the stainless steel corrosion caused by sodium chloride. Sodium hydroxide and salt concentrations were optimized using a high throughput screening approach to achieve the best combination of facility compatibility, cleaning efficiency and resin stability. Additionally, benzyl alcohol is applied to achieve more effective microbial control. Based on the findings, the recommended optimum cleaning strategy is cleaning MabSelect resin with 25 mM NaOH, 0.25 M Na2SO4 and 1% benzyl alcohol solution every cycle, followed by a more stringent cleaning using 50 mM NaOH with 0.25 M Na2SO4 and 1% benzyl alcohol at the end of each manufacturing campaign. A resin life cycle study using the MabSelect affinity resin demonstrates that the new cleaning strategy prolongs resin life time and consistently delivers high purity drug products. Copyright © 2013 Elsevier B.V. All rights reserved.

Critical Value Reporting in Transfusion Medicine: A Survey of Communication Practices in US Facilities.

PubMed

Reese, Erika M; Nelson, Randin C; Flegel, Willy A; Byrne, Karen M; Booth, Garrett S

2017-05-01

While critical value procedures have been adopted in most areas of the clinical laboratory, their use in transfusion medicine has not been reviewed in detail. The results of this study present a comprehensive overview of critical value reporting and communication practices in transfusion medicine in the United States. A web-based survey was developed to collect data on the prevalence of critical value procedures and practices of communicating results. The survey was distributed via email to US hospital-based blood banks. Of 123 facilities surveyed, 84 (68.3%) blood banks had a critical value procedure. From a panel of 23 common blood bank results, nine results were selected by more than 70% of facilities as either a critical value or requiring rapid communication as defined by an alternate procedure. There was overlap among results communicated by facilities with and without a critical value procedure. The most frequently communicated results, such as incompatible crossmatch for RBC units issued uncrossmatched, delay in finding compatible blood due to a clinically significant antibody, and transfusion reaction evaluation suggestive of a serious adverse event, addressed scenarios associated with the leading reported causes of transfusion-related fatalities. American Society for Clinical Pathology, 2017. This work is written by US Government employees and is in the public domain in the US.

29 CFR 1607.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... opportunities of members of any race, sex, or ethnic group will be considered to be discriminatory and... alternative methods of using the selection procedure which have as little adverse impact as possible, to...

29 CFR 1607.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... opportunities of members of any race, sex, or ethnic group will be considered to be discriminatory and... alternative methods of using the selection procedure which have as little adverse impact as possible, to...

29 CFR 1607.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... opportunities of members of any race, sex, or ethnic group will be considered to be discriminatory and... alternative methods of using the selection procedure which have as little adverse impact as possible, to...

29 CFR 1607.3 - Discrimination defined: Relationship between use of selection procedures and discrimination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... opportunities of members of any race, sex, or ethnic group will be considered to be discriminatory and... alternative methods of using the selection procedure which have as little adverse impact as possible, to...

See, Do, Teach? A Review of Contemporary Literature and Call to Action for Communication Skills Teaching in Urology.

PubMed

Kieran, Kathleen; Jensen, Norman M; Rosenbaum, Marcy

2018-04-01

To assess the current state of published literature on communication skills teaching in urology to inform future directions for research and teaching. Excellent patient-physician communication skills increase understanding of medical conditions, facilitate shared decision-making regarding treatment planning, improve clinical outcomes, and decrease lawsuits. Surgical and procedure-based subspecialties, including urology, have generally been slow to incorporate formal communication skills teaching into curricula for postgraduate trainees. We performed a PubMed literature search using multiple keywords, selecting and reviewing articles published in English, and addressing 1 of 3 domains (curriculum development, teaching methods, and assessment methods) of communication skills teaching. The distribution of articles within the urology-specific literature was compared with that of procedure-based specialties as a whole. Eight articles were found in the urology literature, and 24 articles were found in other procedure-based specialties. Within the urology-specific literature, all 8 articles (100%) acknowledged the need for communication curriculum development, 1 article (12.5%) described how communication skills were taught, and 1 article (12.5%) discussed how communication skills were assessed. Fewer articles in other procedure-based specialties acknowledged the need to develop curricula (29.2%, P = .0007) but were equally likely to discuss communication skills teaching (37.5%, P = .63) and assessment (33.3%, P = .73). Orthopedic surgery is the only surgical subspecialty with ongoing, adaptable, formal training for physicians. Most current publications addressing communication skills in procedure-based specialties are specialty specific and focus on only 1 of the 3 communication domains. Opportunities exist to share information and to create more integrated models to teach communication skills in urology. Copyright © 2018 Elsevier Inc. All rights reserved.

Use of glucocorticoids in rheumatoid arthritis - pratical modalities of glucocorticoid therapy: recommendations for clinical practice based on data from the literature and expert opinion.

PubMed

Dernis, Emmanuelle; Ruyssen-Witrand, Adeline; Mouterde, Gaël; Maillefert, Jean-Francis; Tebib, Jacques; Cantagrel, Alain; Claudepierre, Pascal; Fautrel, Bruno; Gaudin, Philippe; Pham, Thao; Schaeverbeke, Thierry; Wendling, Daniel; Saraux, Alain; Loët, Xavier Le

2010-10-01

To develop recommendations about the use of glucocorticoids in patients with established rheumatoid arthritis (RA) managed in everyday practice, using the evidence-based approach and expert opinion. A three-step procedure was used: a scientific committee used a Delphi procedure to select five questions, which formed the basis for developing the recommendations; a systematic literature review was conducted by searching the Medline and Embase databases and the abstracts of meetings held by the Société Française de Rhumatologie (SFR), American College of Rheumatology (ACR), and European League Against Rheumatism (EULAR); and recommendations were developed and validated by a panel of experts based on the data from the literature review and on their experience. For each recommendation, the level of evidence and extent of agreement among experts were determined. The five questions pertained to the use of glucocorticoids in RA patients: role for intravenous glucocorticoid bolus therapy, role for intraarticular injections, and practical modalities of glucocorticoid administration and discontinuation. From the literature search, 93 articles were selected based on their titles and abstracts. Of these, 50 were selected for the literature review. Eight recommendations about the use of glucocorticoid therapy in everyday practice in patients with established RA were validated by a vote among all participating experts: bolus glucocorticoid therapy should be reserved for highly selected situations; triamcinolone hexacetonide is the preferred glucocorticoid for intraarticular therapy, and the joint should be rested for about 24h after the injection; for oral glucocorticoid therapy, agents with a short half-life taken once daily should be preferred; and when discontinuing glucocorticoid therapy, the patient and usual physician should be informed of the risk of adrenal insufficiency. Copyright © 2010 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

Measuring perceived video quality of MPEG enhancement by people with impaired vision

PubMed Central

Fullerton, Matthew; Woods, Russell L.; Vera-Diaz, Fuensanta A.; Peli, Eli

2007-01-01

We used a new method to measure the perceived quality of contrast-enhanced motion video. Patients with impaired vision (n = 24) and normally-sighted subjects (n = 6) adjusted the level of MPEG-based enhancement of 8 videos (4 minutes each) drawn from 4 categories. They selected the level of enhancement that provided the preferred view of the videos, using a reducing-step-size staircase procedure. Most patients made consistent selections of the preferred level of enhancement, indicating an appreciation of and a perceived benefit from the MPEG-based enhancement. The selections varied between patients and were correlated with letter contrast sensitivity, but the selections were not affected by training, experience or video category. We measured just noticeable differences (JNDs) directly for videos, and mapped the image manipulation (enhancement in our case) onto an approximately linear perceptual space. These tools and approaches will be of value in other evaluations of the image quality of motion video manipulations. PMID:18059909

Investigating a memory-based account of negative priming: support for selection-feature mismatch.

PubMed

MacDonald, P A; Joordens, S

2000-08-01

Using typical and modified negative priming tasks, the selection-feature mismatch account of negative priming was tested. In the modified task, participants performed selections on the basis of a semantic feature (e.g., referent size). This procedure has been shown to enhance negative priming (P. A. MacDonald, S. Joordens, & K. N. Seergobin, 1999). Across 3 experiments, negative priming occurred only when the repeated item mismatched in terms of the feature used as the basis for selections. When the repeated item was congruent on the selection feature across the prime and probe displays, positive priming arose. This pattern of results appeared in both the ignored- and the attended-repetition conditions. Negative priming does not result from previously ignoring an item. These findings strongly support the selection-feature mismatch account of negative priming and refute both the distractor inhibition and the episodic-retrieval explanations.

A paper-based analytical device for the determination of hydrogen sulfide in fuel oils based on headspace liquid-phase microextraction and cyclic voltammetry.

PubMed

Nechaeva, Daria; Shishov, Andrey; Ermakov, Sergey; Bulatov, Andrey

2018-06-01

An easily performed miniaturized, cheap, selective and sensitive procedure for the determination of H 2 S in fuel oil samples based on a headspace liquid-phase microextraction followed by a cyclic voltammetry detection using a paper-based analytical device (PAD) was developed. A modified wax dipping method was applied to fabricate the PAD. The PAD included hydrophobic zones of sample and supporting electrolyte connecting by hydrophilic channel. The zones of sample and supporting electrolyte were connected with nickel working, platinum auxiliary and Ag/AgCl reference electrodes. The analytical procedure included separation of H 2 S from fuel oil sample based on the headspace liquid-phase microextraction in alkaline solution. Then, sulfide ions solution obtained and supporting electrolyte were dropped on the zones followed by analyte detection at + 0.45 V. Under the optimized conditions, H 2 S concentration in the range from 2 to 20 mg kg -1 had a good linear relation with the peak current. The limit of detection (3σ) was 0.6 mg kg -1 . The procedure was successfully applied to the analysis of fuel oil samples. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of Hands-Free Devices for the Display of Maintenance Procedures

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Hoffman, Ronald B.; Litaker, Harry, Jr.; Solem, Jody; Holden, Kritina; Twyford, Evan; Conlee, Carl

2007-01-01

Over the past year, NASA's focus has turned to crewed long duration and exploration missions. On these journeys, crewmembers will be required to execute thousands of procedures to maintain life support systems, check out space suits, conduct science experiments, and perform medical exams. To support the many complex tasks crewmembers undertake in microgravity, NASA is interested in providing crewmembers a hands-free work environment to promote more efficient operations. The overarching objective is to allow crewmembers to use both of their hands for tasks related to their mission, versus holding a paper manual or interacting with a display. The use of advanced, hands-free tools will undoubtedly make the crewmembers task easier, but they can also add to overall task complexity if not properly designed. A leading candidate technology for supporting a hands-free environment is the Head-Mounted Display (HMD). A more recent technology (e-book reader) that could be easily temp-stowed near the work area is also a potential hands-free solution. Previous work at NASA involved the evaluation of several commercially available HMDs for visual quality, comfort, and fit, as well as suitability for use in microgravity. Based on results from this work, three HMDs were selected for further evaluation (along with an e-book reader), using International Space Station (ISS)-like maintenance procedures. Two evaluations were conducted in the Space Station Mockup and Trainer Facility (SSMTF) located at the NASA Johnson Space Center (building 9). The SSMTF is a full scale, medium fidelity replica of the pressurized portions of the ISS. It supports crew training such as ingress and egress, habitability, and emergency procedures. In each of the two evaluations, the participants performed two maintenance procedures. One maintenance procedure involved inspecting air filters in a life support system and replacing them with a clean filter if one were found to be contaminated. The second maintenance procedure focused on working in a confined space; specifically, pulling down a rack to inspect wiring configurations, and rewiring in a different pattern. The maintenance procedures were selected to assess mobility, tool use, and access to multiple document sources during task performance. That is, the participant had to move from rack to rack, use a wrench, a camera, etc., replace components, and refer to diagrams to complete tasks. A constraint was imposed that the ISS-like format of the procedures was to be retained, and not modified or optimized for the electronic device ("plug and play" approach). This was based on future plans to test with real procedures on ISS.

Feasibility of Real-Time Selection of Frequency Tables in an Acoustic Simulation of a Cochlear Implant

PubMed Central

Fitzgerald, Matthew; Sagi, Elad; Morbiwala, Tasnim A.; Tan, Chin-Tuan; Svirsky, Mario A.

2013-01-01

Objectives Perception of spectrally degraded speech is particularly difficult when the signal is also distorted along the frequency axis. This might be particularly important for post-lingually deafened recipients of cochlear implants (CI), who must adapt to a signal where there may be a mismatch between the frequencies of an input signal and the characteristic frequencies of the neurons stimulated by the CI. However, there is a lack of tools that can be used to identify whether an individual has adapted fully to a mismatch in the frequency-to-place relationship and if so, to find a frequency table that ameliorates any negative effects of an unadapted mismatch. The goal of the proposed investigation is to test the feasibility of whether real-time selection of frequency tables can be used to identify cases in which listeners have not fully adapted to a frequency mismatch. The assumption underlying this approach is that listeners who have not adapted to a frequency mismatch will select a frequency table that minimizes any such mismatches, even at the expense of reducing the information provided by this frequency table. Design 34 normal-hearing adults listened to a noise-vocoded acoustic simulation of a cochlear implant and adjusted the frequency table in real time until they obtained a frequency table that sounded “most intelligible” to them. The use of an acoustic simulation was essential to this study because it allowed us to explicitly control the degree of frequency mismatch present in the simulation. None of the listeners had any previous experience with vocoded speech, in order to test the hypothesis that the real-time selection procedure could be used to identify cases in which a listener has not adapted to a frequency mismatch. After obtaining a self-selected table, we measured CNC word-recognition scores with that self-selected table and two other frequency tables: a “frequency-matched” table that matched the analysis filters with the noisebands of the noise-vocoder simulation, and a “right information” table that is similar to that used in most cochlear implant speech processors, but in this simulation results in a frequency shift equivalent to 6.5 mm of cochlear space. Results Listeners tended to select a table that was very close to, but shifted slightly lower in frequency from the frequency-matched table. The real-time selection process took on average 2–3 minutes for each trial, and the between-trial variability was comparable to that previously observed with closely-related procedures. The word-recognition scores with the self-selected table were clearly higher than with the right-information table and slightly higher than with the frequency-matched table. Conclusions Real-time self-selection of frequency tables may be a viable tool for identifying listeners who have not adapted to a mismatch in the frequency-to-place relationship, and to find a frequency table that is more appropriate for them. Moreover, the small but significant improvements in word-recognition ability observed with the self-selected table suggest that these listeners based their selections on intelligibility rather than some other factor. The within-subject variability in the real-time selection procedure was comparable to that of a genetic algorithm, and the speed of the real-time procedure appeared to be faster than either a genetic algorithm or a simplex procedure. PMID:23807089

The United Kingdom’s Naval Shipbuilding Industrial Base: The Next Fifteen Years

DTIC Science & Technology

2005-01-01

the United Kingdom 71 Lauder College are developing improved procedures for selecting and training craft modern apprentices, as well as programmes...Next 15 Years for the names of the suppliers, information on what they provided, and the amount of money spent on them. We also asked the ship- yards...analysis on all money spent on suppliers; (2) ration- alise the supply base, consolidating contracts where possible (and where this fits the legal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miraglia, Roberto, E-mail: rmiraglia@ismett.edu; Maruzzelli, Luigi; Tuzzolino, Fabio

Purpose: The aim of this study was to estimate radiation exposure in pediatric liver transplants recipients who underwent biliary interventional procedures and to compare radiation exposure levels between biliary interventional procedures performed using an image intensifier-based angiographic system (IIDS) and a flat panel detector-based interventional system (FPDS). Materials and Methods: We enrolled 34 consecutive pediatric liver transplant recipients with biliary strictures between January 2008 and March 2013 with a total of 170 image-guided procedures. The dose-area product (DAP) and fluoroscopy time was recorded for each procedure. The mean age was 61 months (range 4-192), and mean weight was 17 kgmore » (range 4-41). The procedures were classified into three categories: percutaneous transhepatic cholangiography and biliary catheter placement (n = 40); cholangiography and balloon dilatation (n = 55); and cholangiography and biliary catheter change or removal (n = 75). Ninety-two procedures were performed using an IIDS. Seventy-eight procedures performed after July 2010 were performed using an FPDS. The difference in DAP between the two angiographic systems was compared using Wilcoxon rank-sum test and a multiple linear regression model. Results: Mean DAP in the three categories was significantly greater in the group of procedures performed using the IIDS compared with those performed using the FPDS. Statistical analysis showed a p value = 0.001 for the PTBD group, p = 0.0002 for the cholangiogram and balloon dilatation group, and p = 0.00001 for the group with cholangiogram and biliary catheter change or removal. Conclusion: In our selected cohort of patients, the use of an FPDS decreases radiation exposure.« less

Multidimensional CAT Item Selection Methods for Domain Scores and Composite Scores with Item Exposure Control and Content Constraints

ERIC Educational Resources Information Center

Yao, Lihua

2014-01-01

The intent of this research was to find an item selection procedure in the multidimensional computer adaptive testing (CAT) framework that yielded higher precision for both the domain and composite abilities, had a higher usage of the item pool, and controlled the exposure rate. Five multidimensional CAT item selection procedures (minimum angle;…

43 CFR 9.6 - What procedures apply to the selection of programs and activities under these regulations?

Code of Federal Regulations, 2010 CFR

2010-10-01

... Secretary of changes in their program selections. (d) The Secretary uses a state's process as soon as... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false What procedures apply to the selection of programs and activities under these regulations? 9.6 Section 9.6 Public Lands: Interior Office of the...

On Some Multiple Decision Problems

DTIC Science & Technology

1976-08-01

parameter space. Some recent results in the area of subset selection formulation are Gnanadesikan and Gupta [28], Gupta and Studden [43], Gupta and...York, pp. 363-376. [27) Gnanadesikan , M. (1966). Some Selection and Ranking Procedures for Multivariate Normal Populations. Ph.D. Thesis. Dept. of...Statist., Purdue Univ., West Lafayette, Indiana 47907. [28) Gnanadesikan , M. and Gupta, S. S. (1970). Selection procedures for multivariate normal