Sample records for semicoke
-
High-performance magnetic carbon materials in dye removal from aqueous solutions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gao, Xiaoming, E-mail: dawn1026@163.com; Zhang, Yu; Dai, Yuan
To obtain a novel adsorbent with excellent adsorption capacity and convenient magnetic separation property, magnetic activated semi-coke was prepared by KOH activation method and further modified by FeCl{sub 3}. The surface morphology, physical structure, chemical properties and textural characteristics of unmodified semi-coke, KOH-modified semi-coke and magnetic activated semi-coke were characterized by scanning electron microscopy, X-ray powder diffraction, N{sub 2} adsorption-desorption measurement, and electronic differential system. The adsorption characteristics of the magnetic activated semi-coke were explored for the removal of methyl orang (MO), methylene blue (MB), congo red (CR), acid fuchsin (AF), and rhodamine B (RB) from aqueous solution. The effectsmore » of adsorption parameters, including adsorbent dosage, pH and contact time, were investigated by comparing the adsorption properties of the magnetic activated semi-coke to RB. The result showed that the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. The adsorption experiment data indicated that the pseudosecond order model and the Langmuir model could well explain the adsorption processes of RB on the magnetic activated semi-coke, and the maximum adsorption capacity (q{sub m}) was 526.32 mg/g. The values of thermodynamic parameters (ΔG°, ΔH° and ΔS°) indicated that the adsorption process depended on the temperature of the aqueous phase, and it was spontaneous and exothermic in nature. As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. - Graphical abstract: As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. Display Omitted.« less
-
Modification of semi-coke powder and its adsorption mechanisms for Cr(VI) and methylene blue
NASA Astrophysics Data System (ADS)
Zhang, Linjiang; Liu, Zhuannian; Fan, Yidan; Fan, Aping; Han, Xiaogang
2018-02-01
In this paper, the semi-coke powder was modified by three kinds of physical or chemical methods and then modified semi-coke was used as adsorbent for removal of Cr6+ and methylene blue (MB) from aqueous solution. The effects of time, dosage and pH on removal rate were investigated using batch experiments. The process of Cr6+ and MB adsorption onto the modified semi-coke powder follows pseudo second-order kinetics. The analysis of SEM and BET showed the Specific surface area of modified semi-coke are 84.92 m2/g, which is higher than that of raw semi-coke powder.
-
Preparation of modified semi-coke by microwave heating and adsorption kinetics of methylene blue.
Wang, Xin; Peng, Jin-Hui; Duan, Xin-Hui; Srinivasakannan, Chandrasekar
2013-01-01
Preparation of modified semi-coke has been achieved, using phosphoric acid as the modifying agent, by microwave heating from virgin semi-coke. Process optimization using a Central Composite Design (CCD) design of Response Surface Methodology (RSM) technique for the preparation of modifies semi-coke is presented in this paper. The optimum conditions for producing modified semi-coke were: concentration of phosphoric acid 2.04, heating time 20 minutes and temperature 587 degrees C, with the optimum iodine of 862 mg/g and yield of 47.48%. The textural characteristics of modified semi-coke were analyzed using scanning electron microscopy (SEM) and nitrogen adsorption isotherm. The BET surface area of modified semi-coke was estimated to be 989.60 m2/g, with the pore volume of 0.74 cm3/g and a pore diameter of 3.009 nm, with micro-pore volume contributing to 62.44%. The Methylene Blue monolayer adsorption capacity was found to be mg/g at K. The adsorption capacity of the modified semi-coke highlights its suitability for liquid phase adsorption application with a potential usage in waste water treatment.
-
Ding, Song; Li, Yuran; Zhu, Tingyu; Guo, Yangyang
2015-08-01
To decrease the operating cost of flue gas purification technologies based on carbon-based materials, the adsorption and regeneration performance of low-price semi-coke and activated coke were compared for SO2 and NO removal in a simulated flue gas. The functional groups of the two adsorbents before and after regeneration were characterized by a Fourier transform infrared (FTIR) spectrometer, and were quantitatively assessed using temperature programmed desorption (TPD) coupled with FTIR and acid-base titration. The results show that semi-coke had higher adsorption capacity (16.2% for SO2 and 38.6% for NO) than activated coke because of its higher content of basic functional groups and lactones. After regeneration, the adsorption performance of semi-coke decreased because the number of active functional groups decreased and the micropores increased. Semi-coke had better regeneration performance than activated coke. Semi-coke had a larger SO2 recovery of 7.2% and smaller carbon consumption of 12% compared to activated coke. The semi-coke carbon-based adsorbent could be regenerated at lower temperatures to depress the carbon consumption, because the SO2 recovery was only reduced a small amount. Copyright © 2015. Published by Elsevier B.V.
-
Characteristics and stability of mercury vapor adsorption over two kinds of modified semicoke.
Huawei, Zhang; Xiuli, Liu; Li, Wang; Peng, Liang
2014-01-01
In an attempt to produce effective and lower price gaseous Hg(0) adsorbents, two methods of HCl and KMnO4/heat treatment were used respectively for the surface modification of liginite semicoke from inner Mongolia. The different effects of modification process on the surface physical and chemical properties were analyzed. The characteristics and stability of mercury vapor adsorption over two kinds of modified semicoke were investigated. The results indicated that modification process caused lower micropore quantity and volume capacity of semicoke; the C-Cl functional groups, C=O bond and delocalized electron π on the surface of Cl-SC, the amorphous higher valency Mn (x+) , and O=C-OH functional groups on the surface of Mn-H-SC were the active sites for oxidation and adsorption of gaseous Hg(0). Modification process led to higher mercury removal efficiency of semicoke at 140°C and reduced the stability of adsorbed mercury of semicoke in simulated water circumstance simultaneously.
-
Characteristics and Stability of Mercury Vapor Adsorption over Two Kinds of Modified Semicoke
Huawei, Zhang; Xiuli, Liu; Li, Wang; Peng, Liang
2014-01-01
In an attempt to produce effective and lower price gaseous Hg0 adsorbents, two methods of HCl and KMnO4/heat treatment were used respectively for the surface modification of liginite semicoke from inner Mongolia. The different effects of modification process on the surface physical and chemical properties were analyzed. The characteristics and stability of mercury vapor adsorption over two kinds of modified semicoke were investigated. The results indicated that modification process caused lower micropore quantity and volume capacity of semicoke; the C-Cl functional groups, C=O bond and delocalized electron π on the surface of Cl-SC, the amorphous higher valency Mnx+, and O=C–OH functional groups on the surface of Mn-H-SC were the active sites for oxidation and adsorption of gaseous Hg0. Modification process led to higher mercury removal efficiency of semicoke at 140°C and reduced the stability of adsorbed mercury of semicoke in simulated water circumstance simultaneously. PMID:25309948
-
NASA Astrophysics Data System (ADS)
Li, Qing; Li, Xinghua; Jiang, Jingkun; Duan, Lei; Ge, Su; Zhang, Qi; Deng, Jianguo; Wang, Shuxiao; Hao, Jiming
2016-01-01
Direct household use of unprocessed raw coals for cooking and heating without any air pollution control device has caused serious indoor and outdoor environment problems by emitting particulate matter (PM) and gaseous pollutants. This study examined household emission reduction by switching from unprocessed bituminous and anthracite coals to processed semi-coke briquettes. Two typical stoves were used to test emission characteristics when burning 20 raw coal samples commonly used in residential heating activities and 15 semi-coke briquette samples which were made from bituminous coals by industrial carbonization treatment. The carbonization treatment removes volatile compounds from raw coals which are the major precursors for PM formation and carbon emission. The average emission factors of primary PM2.5, elemental carbon, organic carbon, and carbon monoxide for the tested semi-coke briquettes are much lower than those of the tested raw coals. Based on the current coal consumption data in China, switching to semi-coke briquettes can reduce average emission factors of these species by about 92%, 98%, 91%, and 34%, respectively. Additionally, semi-coke briquette has relatively lower price and higher burnout ratio. The replacement of raw coals with semi-coke briquettes is a feasible path to reduce pollution emissions from household activities.
-
Li, Qing; Li, Xinghua; Jiang, Jingkun; Duan, Lei; Ge, Su; Zhang, Qi; Deng, Jianguo; Wang, Shuxiao; Hao, Jiming
2016-01-01
Direct household use of unprocessed raw coals for cooking and heating without any air pollution control device has caused serious indoor and outdoor environment problems by emitting particulate matter (PM) and gaseous pollutants. This study examined household emission reduction by switching from unprocessed bituminous and anthracite coals to processed semi-coke briquettes. Two typical stoves were used to test emission characteristics when burning 20 raw coal samples commonly used in residential heating activities and 15 semi-coke briquette samples which were made from bituminous coals by industrial carbonization treatment. The carbonization treatment removes volatile compounds from raw coals which are the major precursors for PM formation and carbon emission. The average emission factors of primary PM2.5, elemental carbon, organic carbon, and carbon monoxide for the tested semi-coke briquettes are much lower than those of the tested raw coals. Based on the current coal consumption data in China, switching to semi-coke briquettes can reduce average emission factors of these species by about 92%, 98%, 91%, and 34%, respectively. Additionally, semi-coke briquette has relatively lower price and higher burnout ratio. The replacement of raw coals with semi-coke briquettes is a feasible path to reduce pollution emissions from household activities. PMID:26782059
-
A Novel Study of Methane-Rich Gas Reforming to Syngas and Its Kinetics over Semicoke Catalyst
Zhang, Guojie; Su, Aiting; Qu, Jiangwen; Du, Yannian
2014-01-01
A small-size gasification unit is improved through process optimization to simulate industrial United Gas Improvement Company gasification. It finds that the reaction temperature has important impacts on semicoke catalyzed methane gas mixture. The addition of water vapor can enhance the catalytic activity of reforming, which is due to the fact that addition of water vapor not only removes carbon deposit produced in the reforming and gasification reaction processes, but also participates in gasification reaction with semicoke to generate some active oxygen-containing functional groups. The active oxygen-containing functional groups provide active sites for carbon dioxide reforming of methane, promoting the reforming reaction. It also finds that the addition of different proportions of methane-rich gas can yield synthesis gas with different H2/CO ratio. The kinetics study shows that the semicoke can reduce the activation energy of the reforming reaction and promote the occurrence of the reforming reaction. The kinetics model of methane reforming under the conditions of steam gasification over semicoke is as follows: k-=5.02×103·pCH40.71·pH20.26·exp(−74200/RT). PMID:24959620
-
Variations in toxicity of semi-coking wastewater treatment processes and their toxicity prediction.
Ma, Xiaoyan; Wang, Xiaochang; Liu, Yongjun; Gao, Jian; Wang, Yongkun
2017-04-01
Chemical analyses and bioassays using Vibrio fischeri and Daphnia magna were conducted to evaluate comprehensively the variation of biotoxicity caused by contaminants in wastewater from a semi-coking wastewater treatment plant (WWTP). Pretreatment units (including an oil-water separator, a phenols extraction tower, an ammonia stripping tower, and a regulation tank) followed by treatment units (including anaerobic-oxic treatment units, coagulation-sedimentation treatment units, and an active carbon adsorption column) were employed in the semi-coking WWTP. Five benzenes, 11 phenols, and five polycyclic aromatic hydrocarbons (PAHs) were investigated as the dominant contaminants in semi-coking wastewater. Because of residual extractant, the phenols extraction process increased acute toxicity to V. fischeri and immobilization and lethal toxicity to D. magna. The acute toxicity of pretreated wastewater to V. fischeri was still higher than that of raw semi-coking wastewater, even though 90.0% of benzenes, 94.8% of phenols, and 81.0% of PAHs were removed. After wastewater pretreatment, phenols and PAHs were mainly removed by anaerobic-oxic and coagulation-sedimentation treatment processes respectively, and a subsequent active carbon adsorption process further reduced the concentrations of all target chemicals to below detection limits. An effective biotoxicity reduction was found during the coagulation-sedimentation and active carbon adsorption treatment processes. The concentration addition model can be applied for toxicity prediction of wastewater from the semi-coking WWTP. The deviation between the measured and predicted toxicity results may result from the effects of compounds not detectable by instrumental analyses, the synergistic effect of detected contaminants, or possible transformation products. Copyright © 2016. Published by Elsevier Inc.
-
NASA Astrophysics Data System (ADS)
Anikin, A. E.; Galevsky, G. V.; Nozdrin, E. V.; Rudneva, V. V.; Galevsky, S. G.
2016-09-01
The research of the metallization process of the roll scale and sludge after gas treatment in the BOF production with the use of brown coal semicoke mined in Berezovsky field of the Kansk-Achinsk Basin was carried out. A flow diagram of “cold” briquetting using a water-soluble binder was offered. The reduction of iron from its oxide Fe2O3 with brown coal semicoke in the laboratory electric-tube furnace in the argon atmosphere was studied. The mathematical models of dependence of the metallization degree on variable factors were developed. The optimal values of technological factors and essential characteristics of the obtained metallized products were revealed.
-
Liu, Yafei; Zhang, You; Li, Chuang; Bai, Yun; Zhang, Daoming; Xue, Chunyu; Liu, Guangqing
2018-05-15
Pollutant emissions from incomplete combustion of raw coal in low-efficiency residential heating stoves greatly contribute to winter haze in China. Semi-coke coals and improved heating stoves are expected to lower air pollutant emissions and are vigorously promoted by the Chinese government in many national and local plans. In this study, the thermal performance and air pollutant emissions from semi-coke combustion in improved heating stoves were measured in a pilot rural county and compared to the baseline of burning raw coal to quantify the mitigation potential of air pollutant emissions. A total of five stove-fuel combinations were tested, and 27 samples from 27 different volunteered households were obtained. The heating efficiency of improved stoves increased, but fuel consumption appeared higher with more useful energy output compared to traditional stoves. The emission factors of PM 2.5 , SO 2 , and CO 2 of semi-coke burning in specified improved stoves were lower than the baseline of burning raw coal chunk, but no significant NOx and CO decreases were observed. The total amount of PM 2.5 and SO 2 emissions per household in one heating season was lower, but CO, CO 2 , and NOx increased when semi-coke coal and specified improved stoves were deployed. Most differences were not statistically significant due to the limited samples and large variation, indicating that further evaluation would be needed to make conclusions that could be considered for policy. Copyright © 2018 Elsevier Ltd. All rights reserved.
-
Biodegradation of different petroleum hydrocarbons by free and immobilized microbial consortia.
Shen, Tiantian; Pi, Yongrui; Bao, Mutai; Xu, Nana; Li, Yiming; Lu, Jinren
2015-12-01
The efficiencies of free and immobilized microbial consortia in the degradation of different types of petroleum hydrocarbons were investigated. In this study, the biodegradation rates of naphthalene, phenanthrene, pyrene and crude oil reached about 80%, 30%, 56% and 48% under the optimum environmental conditions of free microbial consortia after 7 d. We evaluated five unique co-metabolic substances with petroleum hydrocarbons, α-lactose was the best co-metabolic substance among glucose, α-lactose, soluble starch, yeast powder and urea. The orthogonal biodegradation analysis results showed that semi-coke was the best immobilized carrier followed by walnut shell and activated carbon. Meanwhile, the significance of various factors that contribute to the biodegradation of semi-coke immobilized microbial consortia followed the order of: α-lactose > semi-coke > sodium alginate > CaCl2. Moreover, the degradation rate of the immobilized microbial consortium (47%) was higher than that of a free microbial consortium (26%) under environmental conditions such as the crude oil concentration of 3 g L(-1), NaCl concentration of 20 g L(-1), pH at 7.2-7.4 and temperature of 25 °C after 5 d. SEM and FTIR analyses revealed that the structure of semi-coke became more porous and easily adhered to the microbial consortium; the functional groups (e.g., hydroxy and phosphate) were identified in the microbial consortium and were changed by immobilization. This study demonstrated that the ability of microbial adaptation to the environment can be improved by immobilization which expands the application fields of microbial remediation.
-
NASA Astrophysics Data System (ADS)
Li, X.; Li, G.; Junji, C.
2017-12-01
In the present study, a persistent heavy haze episode from 13 to 20 January 2014 in Beijing-Tianjin-Hebei (BTH) is simulated using the WRF-CHEM model to evaluate the contribution of residential coal combustion to the air quality. The residential coal used in BTH is replaced by the water-quenched semi-coke with much lower emission factors (EFs) in simulations. The EFs of OC for water-quenched semi-coke (0.12 g kg-1) is 2.42 times lower than that for residential coal used in Beijing-Tianjin (0.29 g kg-1) and 9.17 times in Hebei (1.1 g kg-1). The WRF-CHEM model reasonably well reproduces the spatial distributions and temporal variations of PM2.5 mass concentrations in BTH against the observations over monitoring sites and the temporal variations of aerosol species compared to the AMS measurements in Beijing. On average, the PM2.5 concentration is reduced by around 20 µg m-3 due to the residential coal replacement. Organic aerosols constitute about 62.3% of the PM2.5 reduction in BTH, much higher than the contribution from sulfate (7.0%), nitrate (3.1%), and ammonium (3.1%). In addition, the usage of water-quenched semi-coke in BTH also significantly reduces polycyclic aromatic hydrocarbon (PAHs) concentrations by 50-450 ng m-3 on average. Therefore, the usage of water-quenched semi-coke in BTH could considerably reduce the emissions of air pollutants and decrease the PM2.5 level, beneficial to improvement of the air quality in BTH.
-
Vallner, Leo; Gavrilova, Olga; Vilu, Raivo
2015-08-15
The main wastes of the Estonian shale oil industry - oil shale semi-coke and ashes - are deposited in landfills. The Kohtla-Järve oil shale semi-coke and ash landfill, which is likely the largest of its kind in the World, was started in 1938. The environmental risks connected with the landfill were assessed and prioritized. The most significant hazard to human health is emission of harmful landfill gases and the water contamination in the local river network is harmful for aqueous organisms. The spatial expansion of subsurface contamination predicted by the groundwater transport model completed is practically insignificant from the viewpoint of health services. The landfill's leachates must be captured and purified, and the closed part of the landfill should be covered by greenery. The partial landfill capping recently executed is useless. The EU Landfill Directive requirements imposed on the hydraulic resistance of geological barriers cannot prevent the leakage of contaminants from a landfill. Copyright © 2015 Elsevier B.V. All rights reserved.
-
Destructive treatment of waste gas by catalytic afterburning and adsorption
DOE Office of Scientific and Technical Information (OSTI.GOV)
Eppel, S.A.; Kochetkova, R.P.; Kolisnyk, G.P.
1983-07-01
Because of the considerable energy costs involved in the use of catalytic afterburning to clean up waste gases, an alternative method is suggested: adsorption with the use of low-cost adsorbents that are regenerated by destruction of the substances that has been taken up. Activated semicoke (ASK) is proposed as an adsorbent and tested. On the basis of the results, ASK is recommended for the treatment of waste gases to remove oxygen-containing, sulfurcontaining, and tarry compounds.
-
NASA Astrophysics Data System (ADS)
Yang, Weiwei; Li, Chunhu; Wang, Liang; Sun, ShengNan; Yan, Xin
2015-10-01
The photocatalysts of activated semi-coke supported TiO2-rGO nanocomposite (TiO2-rGO/ASC) with different contents of reduced graphene oxide were fabricated by one-step solvothermal method for NO removal under visible light irradiation. It was confirmed that 8% content of reduced graphene oxide presented the best NO photooxidation performance under visible light irradiation at 70 °C with 350-400 mg/m3 NO,5% O2 and 5% relative humidity. The reasons for improved activity were discussed, alloyed with the mechanism of producing CO. Detailed structural information of TiO2-rGO/ASC photocatalysts was characterized by scanning electron microscope (SEM), energy dispersive X-ray Spectroscopy (EDX), X-ray diffraction analysis (XRD), UV-Vis diffuse reflectance spectra (UV-Vis DRS) and photoluminescence (PL), which indicated that the introduction of rGO was responsible for well dispersion, smaller crystalline size, red shift of absorption band and suppressing quick photo-induced charges recombination of TiO2-rGO/ASC photocatalysts. Optimization of operational parameters with 70 °C, 8% O2 and 8% relative humidity were also obtained. Deactivation of TiO2-rGO/ASC photocatalysts for NO removal was investigated by Fourier-transform infrared (FTIR) analysis. Regeneration experiments showed that thermal vapor regeneration would be optimal method owing to excellent regenerative capacity and inexpensive procedure.
-
Beneficiation of Turkish lignites by thermal treatment and magnetic separation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Onal, G.; Renda, D.; Mustafaev, I.
1999-07-01
In this paper, the improvement of Turkish lignites by semi-coking and REMS magnetic separation, in two stages, is discussed. The oxidation and decomposition of pyrite through the thermal treatment result in the formation of iron oxide and pyrrhotite on the surface. In addition to pyrite, part of the organic sulfur is also removed. After thermal treatment of lignites at temperatures ranging from 370 to 650 C, the application of REMS magnetic separator produces a product higher in calorific value and lower in sulfur content. The product can be utilized after briquetting. The volatile gases can also be used after sulfurmore » removal. This process appears to be feasible as a clean coal manufacture from the point of energy efficiency. A short economic analysis is also presented.« less
-
NASA Astrophysics Data System (ADS)
Tugov, A. N.; Ots, A.; Siirde, A.; Sidorkin, V. T.; Ryabov, G. A.
2016-06-01
Prospects of the use of oil shale are associated with its thermal processing for the production of liquid fuel, shale oil. Gaseous by-products, such as low-calorie generator gas with a calorific value up to 4.3MJ/m3 or semicoke gas with a calorific value up to 56.57 MJ/m3, are generated depending on the oil shale processing method. The main methods of energy recovery from these gases are either their cofiring with oil shale in power boilers or firing only under gaseous conditions in reconstructed or specially designed for this fuel boilers. The possible use of gaseous products of oil shale processing in gas-turbine or gas-piston units is also considered. Experiments on the cofiring of oil shale gas and its gaseous processing products have been carried out on boilers BKZ-75-39FSl in Kohtla-Järve and on the boiler TP-101 of the Estonian power plant. The test results have shown that, in the case of cofiring, the concentration of sulfur oxides in exhaust gases does not exceed the level of existing values in the case of oil shale firing. The low-temperature corrosion rate does not change as compared to the firing of only oil shale, and, therefore, operation conditions of boiler back-end surfaces do not worsen. When implementing measures to reduce the generation of NO x , especially of flue gas recirculation, it has been possible to reduce the emissions of nitrogen oxides in the whole boiler. The operation experience of the reconstructed boilers BKZ-75-39FSl after their transfer to the firing of only gaseous products of oil shale processing is summarized. Concentrations of nitrogen and sulfur oxides in the combustion products of semicoke and generator gases are measured. Technical solutions that made it possible to minimize the damage to air heater pipes associated with the low-temperature sulfur corrosion are proposed and implemented. The technological measures for burners of new boilers that made it possible to burn gaseous products of oil shale processing with low emissions of nitrogen oxides are developed.
-
Evolution of Submicrometer Organic Aerosols during a Complete Residential Coal Combustion Process.
Zhou, Wei; Jiang, Jingkun; Duan, Lei; Hao, Jiming
2016-07-19
In the absence of particulate matter (PM) control devices, residential coal combustion contributes significantly to ambient PM pollution. Characterizing PM emissions from residential coal combustion with high time resolution is beneficial for developing control policies and evaluating the environmental impact of PM. This study reports the evolution of submicrometer organic aerosols (OA) during a complete residential coal combustion process, that is, from fire start to fire extinction. Three commonly used coal types (bituminous, anthracite, and semicoke coals) were evaluated in a typical residential stove in China. For all three types of coal, the OA emission exhibited distinct characteristics in the four stages, that is, ignition, fierce combustion, relatively stable combustion, and ember combustion. OA emissions during the ignition stage accounted for 58.2-85.4% of the total OA emission of a complete combustion process. The OA concentration decreased rapidly during the fierce combustion stage and remained low during the relatively stable combustion stage. During these two stages, a significant ion peak of m/z 73 from organic acids were observed. The degree of oxidation of the OA increased from the first stage to the last stage. Implications for ambient OA source-apportionment and residential PM emission characterization and control are discussed.
-
Truu, Jaak; Heinaru, Eeva; Talpsep, Ene; Heinaru, Ain
2002-01-01
The oil-shale industry has created serious pollution problems in northeastern Estonia. Untreated, phenol-rich leachate from semi-coke mounds formed as a by-product of oil-shale processing is discharged into the Baltic Sea via channels and rivers. An exploratory analysis of water chemical and microbiological data sets from the low-flow period was carried out using different multivariate analysis techniques. Principal component analysis allowed us to distinguish different locations in the river system. The riverine microbial community response to water chemical parameters was assessed by co-inertia analysis. Water pH, COD and total nitrogen were negatively related to the number of biodegradative bacteria, while oxygen concentration promoted the abundance of these bacteria. The results demonstrate the utility of multivariate statistical techniques as tools for estimating the magnitude and extent of pollution based on river water chemical and microbiological parameters. An evaluation of river chemical and microbiological data suggests that the ambient natural attenuation mechanisms only partly eliminate pollutants from river water, and that a sufficient reduction of more recalcitrant compounds could be achieved through the reduction of wastewater discharge from the oil-shale chemical industry into the rivers.
-
Processing of converter sludges on the basis of thermal-oxidative coking with coals
NASA Astrophysics Data System (ADS)
Kuznetsov, S. N.; Shkoller, M. B.; Protopopov, E. V.; Kazimirov, S. A.; Temlyantsev, M. V.
2017-09-01
The paper deals with the solution of an important problem related to the recycling of converter sludge. High moisture and fine fractional composition of waste causes the application of their deep dehydration and lumping. To reduce environmental emissions the non-thermal method of dehydration is considered - adsorption-contact drying. As a sorbent, the pyrolysis product of coals from the Kansko-Achinsky basin - brown coal semi-coke (BSC) obtained by the technology “Thermokoks”. Experimental data on the dehydration of high-moisture wastes with the help of BSC showed high efficiency of the selected material. The lumping of the dried converter dust was carried out by thermo-chemical coking with coals of grades GZh (gas fat coal) and Zh (fat coal). As a result, an iron-containing product was obtained - ferrocoke, which is characterized by almost complete reduction of iron oxides, as well as zinc transition into a vapor state, and is removed with gaseous process products. Based on the results of the experimental data a process basic diagram of the utilization of converter sludge to produce ferrocoke was, which can be effectively used in various metallurgical aggregates, for example, blast furnaces, converters and electric arc furnaces. In the basic technological scheme heat generated by ferrocoke cooling and the energy of the combustion products after the separation of zinc in the gas turbine plant will be used.
-
Plastic wastes as modifiers of the thermoplasticity of coal
DOE Office of Scientific and Technical Information (OSTI.GOV)
M.A. Diez; C. Barriocanal; R. Alvarez
2005-12-01
Plastic waste recycling represents a major challenge in environmental protection with different routes now available for dealing with mechanical, chemical, and energy recycling. New concepts in plastic waste recycling have emerged so that now such wastes can be used to replace fossil fuels, either as an energy source or as a secondary raw material. Our objective is to explore the modification of the thermoplastic properties of coal in order to assess the possibility of adding plastic waste to coal for the production of metallurgical coke. Two bituminous coals of different rank and thermoplastic properties were used as a base componentmore » of blends with plastic wastes such as high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), poly(ethylene terephthalate) (PET), and acrilonitrile-butadiene-styrene copolymer (ABS). In all cases, the addition of plastic waste led to a reduction in Gieseler maximum fluidity, the extent of the reduction depending on the fluidity of the base coal, and the amount, the molecular structure, and the thermal behavior of the polymer. As a consequence, the amount of volatile matter released by the plastic waste before, during, and after the maximum fluidity of the coal and the hydrogen-donor and hydrogen-acceptor capacities of the polymer were concluded to be key factors in influencing the extent of the reduction in fluidity and the development of anisotropic carbons. The incorporation of the plastic to the carbon matrix was clearly established in semicokes produced from blends of a high-fluid coal and the plastic tested by SEM examination. 42 refs., 10 figs., 7 tabs.« less
-
Numerical investigation of the staged gasification of wet wood
NASA Astrophysics Data System (ADS)
Donskoi, I. G.; Kozlov, A. N.; Svishchev, D. A.; Shamanskii, V. A.
2017-04-01
Gasification of wooden biomass makes it possible to utilize forestry wastes and agricultural residues for generation of heat and power in isolated small-scale power systems. In spite of the availability of a huge amount of cheap biomass, the implementation of the gasification process is impeded by formation of tar products and poor thermal stability of the process. These factors reduce the competitiveness of gasification as compared with alternative technologies. The use of staged technologies enables certain disadvantages of conventional processes to be avoided. One of the previously proposed staged processes is investigated in this paper. For this purpose, mathematical models were developed for individual stages of the process, such as pyrolysis, pyrolysis gas combustion, and semicoke gasification. The effect of controlling parameters on the efficiency of fuel conversion into combustible gases is studied numerically using these models. For the controlling parameter are selected heat inputted into a pyrolysis reactor, the excess of oxidizer during gas combustion, and the wood moisture content. The process efficiency criterion is the gasification chemical efficiency accounting for the input of external heat (used for fuel drying and pyrolysis). The generated regime diagrams represent the gasification efficiency as a function of controlling parameters. Modeling results demonstrate that an increase in the fraction of heat supplied from an external source can result in an adequate efficiency of the wood gasification through the use of steam generated during drying. There are regions where it is feasible to perform incomplete combustion of the pyrolysis gas prior to the gasification. The calculated chemical efficiency of the staged gasification is as high as 80-85%, which is 10-20% higher that in conventional single-stage processes.
-
Li, Qing; Jiang, Jingkun; Wang, Shuxiao; Rumchev, Krassi; Mead-Hunter, Ryan; Morawska, Lidia; Hao, Jiming
2017-01-15
This review briefly introduces current status of indoor and ambient air pollution originating from household coal and biomass combustion in mainland China. Owing to low combustion efficiency, emissions of CO, PM 2.5 , black carbon (BC), and polycyclic aromatic hydrocarbons have significant adverse consequences for indoor and ambient air qualities, resulting in relative contributions of more than one-third in all anthropogenic emissions. Their contributions are higher in less economically developed regions, such as Guizhou (61% PM 2.5 , 80% BC), than that in more developed regions, such as Shanghai (4% PM 2.5 , 17% BC). Chimneys can reduce ~80% indoor PM 2.5 level when burning dirty solid fuels, such as plant materials. Due to spending more time near stoves, housewives suffer much more (~2 times) PM 2.5 than the adult men, especially in winter in northern China (~4 times). Improvement of stove combustion/thermal efficiencies and solid fuel quality are the two essential methods to reduce pollutant emissions. PM 2.5 and BC emission factors (EFs) have been identified to increase with volatile matter content in traditional stove combustion. EFs of dirty fuels are two orders higher than that of clean ones. Switching to clean ones, such as semi-coke briquette, was identified to be a feasible path for reducing >90% PM 2.5 and BC emissions. Otherwise, improvement of thermal and combustion efficiencies by using under-fire technology can reduce ~50% CO 2 , 87% NH 3 , and 80% PM 2.5 and BC emissions regardless of volatile matter content in solid fuel. However, there are still some knowledge gaps, such as, inventory for the temporal impact of household combustion on air quality, statistic data for deployed clean solid fuels and advanced stoves, and the effect of socioeconomic development. Additionally, further technology research for reducing air pollution emissions is urgently needed, especially low cost and clean stove when burning any type of solid fuel. Furthermore, emission-abatement oriented policy should base on sound scientific evidence to significantly reduce pollutant emissions. Copyright © 2016 Elsevier B.V. All rights reserved.
-
NASA Astrophysics Data System (ADS)
Astover, Alar; Kõlli, Raimo; Wojciech Szajdak, Lech
2010-05-01
Soil organic matter (SOM) is considered to be as the most important factor in soil forming, development and continuous functioning. Sequestrated into SOM organic carbon concentrations, pools and residence time in soil, as well acting intensity of interconnected with SOM edaphon are soil type specific or characteristic to certain soil types. In depending on soil moisture regime, calcareousness and clay content for each soil type certain soil organic carbon (SOC) retaining capacity and its vertical distribution pattern are characteristic. However, land use change (crop rotation, continuous cropping, no-tillage, melioration, rewetting) has greatest influence mainly on fabric of epipedon and biological functions of soil cover. Stagnic Albeluvisols are largely distributed at Tartu County. They form here more than half from arable soils. The establishment of long-term field trial and forest research area in these regions for biochemical analysis of Stagnic Albeluvisols' organic matter is in all respects justified. In 1989, an international long-term experiment on the organic nitrogen or IOSDV (Internationale Organische Stickstoffdauerdiingungsversuche) with three-field crop rotation (potato - spring wheat - spring barley) was started at Eerika near Tartu (58° 22.5' N; 26° 39.8' E) on Stagnic Albeluvisol. The main aims of this study were to determine the long-term effects of cropping systems on physico-chemical properties of soils and their productivity. The design of this field experiment is similar to other European network of IOSDV experiments. Before the establishment of this experiment in 1989 it was in set-aside state (5-6 years) as field-grass fallow. It was used as arable land in condition of state farm during 1957-83. Average agrochemical characteristics of the plough horizon of soil in the year of establishment were the following: humus content 17.1 g kg-1, total nitrogen content 0.9 g kg-1, C:N ratio 11 and pHKCl 6.3. DL soluble phosphorus content was 44 mg kg-1 and potassium 133 mg kg-1. Content of both Mg - 48 mg kg-1 and Ca -1090 mg kg-1 were determined by AL-method. Each plot of the experiment was divided according to three treatments of organic fertilizers as follows: (1) Without any organic manure from the beginning of the experiment (WOM); (2) Farmyard manure 40 Mg ha-1 for potato (FYM); (3) Alternative organic fertilizers in autumn before ploughing (beet leaves until 1995, since 1996 straw) (RS). Two first organic treatments have been unchangeable since beginning of the experiment. In treatment of alternative organic fertilizers in autumn 2001, recultivation substance (RS - oil shale semi-coke mixed with sphagnum peat at voluminous ratio 1:1) 20-60 Mg ha-1 was applied. In autumn 2002, compost (40 Mg ha-1) was applied formed from RS and solid fraction of pig slurry for potato or created from RS with town waste sludge for spring barley. RS is with alkaline reaction and has high content of K, Ca, Mg and the content of heavy metals is close to their average value in Estonian mineral soils. Each treatment of organic manure (three in total) was divided into five mineral fertilizer treatments by nitrogen amount (0, 40, 80, 120 and 160 kg N ha-1), from which in current study two variants of mineral fertilizer (0 and 120 kg ha-1) were used in three replications. The combined mineral fertilizers N120P23K57 for spring cereals and N120P55K185 for potato were applied in spring before sowing-plantation. The soil materials from different fertilizer treatments of arable soils (S1 - S6) and from forest (S7) were sampled in October 2003. Soil samples are marked using the numeration and the nomination as follows: S1 - without any organic and mineral fertilizers -WOM/N-0, S2 - direct or after effect of farmyard manure without additional mineral fertilizer - FYM/N-0, S3 - after effect of RS or direct effect of compost made from RS with solid fraction of pig slurry or town wastewater sludge without additional mineral fertilizer - RS/N-0, S4 - without organic manure, but using mineral fertilizer 120 kg N ha-1 - WOM/N-120, S5 - farmyard manure with mineral fertilizer 120 kg N ha-1 - FYM/N-120, S6 - composts from RS with mineral fertilizer 120 kg N ha-1 - RS/N-120, S7 - Sample of forest soil humus horizon taken from the profile of Stagnic Albeluvisol located in prematured (75-85 years) Oxalis site-type spruce forest (situated very close to Eerika field trial at Tiksoja). The goal of this investigation study was to reveal (a) the differences in the content and activity of biologically active substances found in SOM of arable soils under long-term continuous crop rotation fertilized with organic and inorganic fertilizers (b) to shown that natural conditions changed biochemical properties of forest soils. These investigations demonstrate the impact of cultivated plants and kind of fertilizers on different kind of nitrogen and organic carbon and plant growth hormone (IAA), activities of enzymes participated in nitrogen cycle such as urease and nitrate reductase in soil, and also crop yields. There is considerable overlap between biochemical properties of soils and cultivation and also fertilization. We found that the application of WOM/N-120 irrespective of cultivated plant leads to the highest crop yields.
-
NASA Astrophysics Data System (ADS)
Niedoba, Tomasz; Jamróz, Dariusz
2013-12-01
Coal as energetic raw material features by many parameters determining its quality. In classification of coal types there are many of them with typical division of energetic, semi-coking and coking coal. The data concerning coal are usually treated as independent values while this kind of approach is not always right. Authors proposed new solutions in this aspect and performed the multidimensional analysis of three selected types of coal featuring by various properties which originated from three various hard coal mines located in Upper Silesia Region. The object of the research was so-called raw coal which was not processed before. For each type of coal the detailed statistical analysis of seven chosen properties of coal was performed. To perform adequate and complete statistical analysis it is necessary to analyze the chosen properties of coal together in multidimensional way. It was decided to apply new and modern visualizing methods of multidimensional data which were observational tunnels method and parallel coordinates method. The applied methods allowed to obtain visualization of seven-dimensional data describing coal. By means of these visualizations it was possible to observe the significant division of the features space between researched types of coal. These methods allowed to look at the investigated data from various perspectives and make possible to determine significant differences between researched materials. For the investigated coals such differences were determined clearly what proved that by means of these methods it is possible to successfully identify type of coal as well to analyze in details its individual properties and identify, for example, particle size fraction etc. The obtained results are innovative and are the basis for more detailed researches taking into consideration also other coal properties, including its structure and texture. This methodology can be also applied successfully for other types of raw materials, like ores. Surowce mineralne, które podlegają wzbogacaniu w celu ich lepszego wykorzystania mogą być (charakteryzują się) charakteryzowane wieloma wskaźnikami opisującymi ich, interesujące przeróbkarza, cechy. Podstawowymi cechami są wielkość ziaren oraz ich gęstość, które decydują o przebiegu rozdziału zbiorów ziaren (nadaw) i efektach takiego rozdziału. Rozdział prowadzi się z reguły, w celu uzyskania produktów o zróżnicowanych wartościach średnich wybranej cechy, która zwykle charakteryzowana jest zawartością określonego składnika surowca wyznaczoną na drodze analiz chemicznych. Takie podejście do surowca mineralnego prowadzi do potraktowania go jako wielowymiarowego wektora X = [X1, …, Xn]. Zasadniczym problemem jest także wybór jednostki populacji generalnej (ziarno, jednostka objętości lub masy), co może decydować o kierunkach charakteryzowania wielowymiarowych powiązań cech wektora X. Takimi kierunkami charakteryzowania mogą być: - wielowymiarowe rozkłady wektora losowego X wraz ze wszystkimi konsekwencjami metody (Lyman, 1993; Niedoba, 2009; 2011; Olejnik et al., 2010; Niedoba & Surowiak, 2012); - wielowymiarowe równania regresji wraz z analizą macierzy współczynników korelacji liniowej oraz korelacji cząstkowej (Niedoba, 2013); - analiza czynnikowa (Tumidajski & Saramak, 2009); - inne metody, w tym wizualizacja metodą tuneli obserwacyjnych (Jamróz, 2001), osi równoległych oraz wizualizacja zależności pomiędzy wielowymiarowymi bryłami (Jamróz, 2009). Wielowymiarowe rozkłady wektora X traktowanego jako wektor losowy, mają już swoją bogatą literaturę i praktyczne ich zastosowanie i nie będą przedmiotem tej publikacji. Pozostałe metody są ze sobą w pewien sposób powiązane, co skrótowo zostało przedstawione w artykule. Macierze współczynników korelacji liniowej i współczynników korelacji cząstkowej są związane, z reguły, z istniejącymi modelami liniowymi zależności występujących między badanymi zmiennymi wektora X. Współczynniki korelacji liniowej są wyznaczane dla par zmiennych losowych całkowicie niezależnie od pozostałych zmiennych. Cząstkowe współczynniki korelacji liniowej wyznaczane są w oparciu o macierz współczynniki korelacji liniowej z uwzględnieniem roli pozostałych zmiennych w rozważanym równaniu regresji liniowej. W przypadku analizy trzech zmiennych losowych, z których jedna jest traktowana jako zmienna zależna a dwie pozostałe jako niezależne sprowadza się to do wyznaczania współczynników korelacji dla zrzutowanych punktów równolegle do płaszczyzny regresji na ściany układu współrzędnych. Pozwala to wyznaczyć hierarchię (siłę wpływu) zależności zmiennych w rozpatrywanym układzie. Na analizie macierzy współczynników korelacji liniowej oparta jest analiza czynnikowa, która pozwala pogrupować występujące zmienne w tzw. czynniki, które reprezentują połączone wpływy zmiennych na rezultaty rozpatrywanych procesów, czyli przeprowadzić pewną klasyfikację zmiennych. W klasyfikacji typów węgli wyróżnia się wiele typów, z umownym podziałem na węgle energetyczne i koksujące. Dane dotyczące węgla są traktowane zwykle jako niezależne wielkości, przy czym takie podejście nie zawsze jest właściwe. Autorzy zaproponowali nowe rozwiązania w tym zakresie i dokonali wielowymiarowej analizy trzech wybranych typów węgla o różnych właściwościach (węgle typu 31, 34.2 oraz 35), które pochodziły z trzech różnych kopalń zlokalizowanych w Górnośląskim Okręgu Przemysłowym. Obiektem badań w każdej z tych kopalń był tzw. węgiel surowy, nie poddawany procesom przeróbczym. Dla każdego z węgli dokonano szczegółowej analizy wybranych siedmiu cech, opisujących jego właściwości, których przykładowe wyniki zostały zaprezentowane w tabelach 1-3. Aby dokonać adekwatnej i dokładnej analizy statystycznej zebranych danych konieczna jest wielowymiarowa analiza wybranych cech węgla łącznie. Zdecydowano się na zastosowanie nowatorskich metod wizualizacji wielowymiarowych danych, którymi były metoda tuneli obserwacyjnych oraz metoda osi równoległych. Zasady i metodyka badań zostały przedstawione w podrozdziałach 2 i 3. Zastosowane metody umożliwiły uzyskanie wizualizacji siedmiowymiarowych danych opisujących węgiel. Za pomocą tych wizualizacji możliwe jest zaobserwowanie wyraźnego podziału przestrzeni cech pomiędzy badanymi typami węgla. Metody te umożliwiły spojrzenie na badane dane z różnych perspektyw, które pozwalają na stwierdzenie zasadniczych różnic badanych materiałów. Dla badanych węgli stwierdzono wyraźne takie różnice co świadczy o tym, że za pomocą proponowanych metod możliwa jest skuteczna identyfikacja typu węgla, jak również dokładniejsza analiza jego poszczególnych cech i identyfikacja np. klasy ziarnowej. Szczegółowe obrazy i ich interpretacja zostały przedstawione w rozdziale 3 i we wnioskach końcowych. Rysunki 3-5 obrazują różnice pomiędzy poszczególnymi typami węgla otrzymane metodą tuneli obserwacyjnych. Wyraźnie można rozgraniczyć próbki dotyczące poszczególnych węgli a tym samym możliwa jest identyfikacja typu węgla na podstawie wielowymiarowej analizy. Rysunki 6-7 pokazują zastosowanie innej metody wielowymiarowej, którą była metoda osi równoległych. Metoda ta okazała się być skuteczna do uzyskania informacji o konieczności przeskalowania poszczególnych cech, w celu uzyskania bardziejczytelnych rezultatów. Natomiast rysunek 10 pokazuje różnice otrzymane metodą tuneli obserwacyjnych pomiędzy charakterystykami konkretnych klas ziarnowych wybranego materiału, którym w tym przypadku był węgiel typu 31. Uzyskane wyniki i zastosowana metodyka są nowatorskie i stanowią bazę pod bardziej szczegółowe badania, biorące pod uwagę także inne charakterystyki węgli, w tym ich strukturę i teksturę. Za pomocą przedstawionych metod możliwe jest stwierdzenie, czy wybrane cechy są wystarczające do identyfikacji zarówno typu węgla, jak również klasy ziarnowej i innych jego cech. Metodyka ta może być również stosowana z powodzeniem dla innych typów surowców mineralnych, np. dla rud.