The great efficacy of personal and equipment assistance in reducing disability.

PubMed Central

Verbrugge, L M; Rennert, C; Madans, J H

1997-01-01

OBJECTIVES: Personal and equipment assistance are common strategies to reduce disability. This study sought to determine how often assistance reduces or even completely resolves health-related difficulties in everyday tasks. METHODS: Data are from the NHANES I Epidemiologic Followup Study. Adults aged 35 to 90 reported difficulty doing 12 everyday tasks on their own without assistance. Those stating that they had much difficulty or were unable were asked if they had personal assistance and/or equipment assistance, and their degree of difficulty with assistance. Use and efficacy of assistance are studied by gender, age, intrinsic (unassisted) degree of difficulty, and type of assistance. RESULTS: Most people use assistance for the 12 tasks; "personal assistance only" is the principal type used for upper-extremity and body transfer tasks; "equipment only" ranks first for lower-extremity tasks. Assistance reduces difficulty for the great majority of persons (75% to 85%) and completely resolves difficulty for about 25%. Equipment only proves to be the most efficacious strategy for reducing and resolving limitations. CONCLUSIONS: Equipment's success may be due to greater perceived gains when people accomplish the assistance by themselves. PMID:9096538

Flight test results for a separate surface stability augmented Beech model 99

NASA Technical Reports Server (NTRS)

Jenks, G. E.; Henry, H. F.; Roskam, J.

1977-01-01

A flight evaluation of a Beech model 99 equipped with an attitude command control system incorporating separate surface stability augmentation (SSSA) was conducted to determine whether an attitude command control system could be implemented using separate surface controls, and to determine whether the handling and ride qualities of the aircraft were improved by the SSSA attitude command system. The results of the program revealed that SSSA is a viable approach to implementing attitude command and also that SSSA has the capability of performing less demanding augmentation tasks such as yaw damping, wing leveling, and pitch damping. The program also revealed that attitude command did improve the pilot rating and ride qualities of the airplane while flying an IFR mission in turbulence. Some disadvantages of the system included the necessity of holding aileron force in a banked turn and excessive stiffness in the pitch axis.

Improving machine operation management efficiency via improving the vehicle park structure and using the production operation information database

NASA Astrophysics Data System (ADS)

Koptev, V. Yu

2017-02-01

The work represents the results of studying basic interconnected criteria of separate equipment units of the transport network machines fleet, depending on production and mining factors to improve the transport systems management. Justifying the selection of a control system necessitates employing new methodologies and models, augmented with stability and transport flow criteria, accounting for mining work development dynamics on mining sites. A necessary condition is the accounting of technical and operating parameters related to vehicle operation. Modern open pit mining dispatching systems must include such kinds of the information database. An algorithm forming a machine fleet is presented based on multi-variation task solution in connection with defining reasonable operating features of a machine working as a part of a complex. Proposals cited in the work may apply to mining machines (drilling equipment, excavators) and construction equipment (bulldozers, cranes, pile-drivers), city transport and other types of production activities using machine fleet.

Orbital construction support equipment

NASA Technical Reports Server (NTRS)

1977-01-01

Approximately 200 separate construction steps were defined for the three solar power satellite (SPS) concepts. Detailed construction scenarios were developed which describe the specific tasks to be accomplished, and identify general equipment requirements. The scenarios were used to perform a functional analysis, which resulted in the definition of 100 distinct SPS elements. These elements are the components, parts, subsystems, or assemblies upon which construction activities take place. The major SPS elements for each configuration are shown. For those elements, 300 functional requirements were identified in seven generic processes. Cumulatively, these processes encompass all functions required during SPS construction/assembly. Individually each process is defined such that it includes a specific type of activity. Each SPS element may involve activities relating to any or all of the generic processes. The processes are listed, and examples of the requirements defined for a typical element are given.

V-TECS Guide for Farm Equipment Mechanic.

ERIC Educational Resources Information Center

McClimon, Hugh P.; And Others

This curriculum guide for a vocational agriculture course in farm equipment mechanics addresses the three domains of learning (psychomotor, cognitive, and affective) while providing job-relevant tasks and suggestions for specific classroom activities for each identified task. This guide provides performance objectives for the following 13 tasks:…

46 CFR 162.050-21 - Separator: Design specification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Separator: Design specification. 162.050-21 Section 162.050-21 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Pollution Prevention Equipment § 162.050-21 Separator: Design specification. (a) A...

46 CFR 162.050-21 - Separator: Design specification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Separator: Design specification. 162.050-21 Section 162.050-21 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Pollution Prevention Equipment § 162.050-21 Separator: Design specification. (a) A...

Task Lists for Agricultural Occupations, 1988: Cluster Matrices for Agricultural Occupations. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Pepple, Jerry

This document contains four publications for agricultural occupations in Illinois. "Task Lists for Agricultural Occupations" provide lists of employability skills for the following: park aide; hand sprayer; gardener/groundskeeper; salesperson, parts, agricultural equipment; and dairy processing equipment operator. Each list contains skills…

Allocating Marine Expeditionary Unit Equipment to Minimize Shortfalls. Third Edition

DTIC Science & Technology

2015-01-01

equipment to accomplish them. A critical component of mission accomplishment is the MEU’s ability to access equipment deemed nec- essary to...other tasks, or simply not onboard or readily accessible , substitu- tions or compromises are then made. The process of developing planning factors is... access equip- ment deemed necessary to accomplish all tasks associated with the mission. In this report, the term mission accomplishment refers strictly

A prototype supervised intelligent robot for helping astronauts

NASA Technical Reports Server (NTRS)

Erickson, J. D.; Grimm, K. A.; Pendleton, T. W.

1994-01-01

The development status is described of a prototype supervised intelligent robot for space application for purposes of (1) helping the crew of a spacecraft such as the Space Station with various tasks such as holding objects and retrieving/replacing tools and other objects from/into storage, and for purposes of (2) retrieving detached objects, such as equipment or crew, that have become separated from their spacecraft. In addition to this set of tasks in this low Earth orbiting spacecraft environment, it is argued that certain aspects of the technology can be viewed as generic in approach, thereby offering insight into intelligent robots for other tasks and environments. Also described are characterization results on the usable reduced gravity environment in an aircraft flying parabolas (to simulate weightlessness) and results on hardware performance there. These results show it is feasible to use that environment for evaluative testing of dexterous grasping based on real-time visual sensing of freely rotating and translating objects.

Effect of Spatial Titration on Task Performance

ERIC Educational Resources Information Center

Glowacki, Lawrence

1976-01-01

A reinforcement schedule and spatial titration method were used to determine task-reinforcement area separation most preferred and effective in two third-grade boys. Errors in task performance decreased task-reinforcement area separation, while correct responses in task performance increased task-reinforcement area separation. (Author)

Annual Report Nucelar Energy Research and Development Program Nuclear Energy Research Initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hively, LM

2003-02-13

NERI Project No.2000-0109 began in August 2000 and has three tasks. The first project year addressed Task 1, namely development of nonlinear prognostication for critical equipment in nuclear power facilities. That work is described in the first year's annual report (ORNLTM-2001/195). The current (second) project year (FY02) addresses Task 2, while the third project year will address Tasks 2-3. This report describes the work for the second project year, spanning August 2001 through August 2002, including status of the tasks, issues and concerns, cost performance, and status summary of tasks. The objective of the second project year's work is amore » compelling demonstration of the nonlinear prognostication algorithm using much more data. The guidance from Dr. Madeline Feltus (DOE/NE-20) is that it would be preferable to show forewarning of failure for different kinds of nuclear-grade equipment, as opposed to many different failure modes from one piece of equipment. Long-term monitoring of operational utility equipment is possible in principle, but is not practically feasible for the following reason. Time and funding constraints for this project do not allow us to monitor the many machines (thousands) that will be necessary to obtain even a few failure sequences, due to low failure rates (<10{sup -3}/year) in the operational environment. Moreover, the ONLY way to guarantee a controlled failure sequence is to seed progressively larger faults in the equipment or to overload the equipment for accelerated tests. Both of these approaches are infeasible for operational utility machinery, but are straight-forward in a test environment. Our subcontractor has provided such test sequences. Thus, we have revised Tasks 2.1-2.4 to analyze archival test data from such tests. The second phase of our work involves validation of the nonlinear prognostication over the second and third years of the proposed work. Recognizing the inherent limitations outlined in the previous paragraph, Dr. Feltus urged Oak Ridge National Laboratory (ORNL) to contact other researchers for additional data from other test equipment. Consequently, we have revised the work plan for Tasks 2.1-2.2, with corresponding changes to the work plan as shown in the Status Summary of NERI Tasks. The revised tasks are as follows: Task 2.1--ORNL will obtain test data from a subcontractor and other researchers for various test equipment. This task includes development of a test plan or a description of the historical testing, as appropriate: test facility, equipment to be tested, choice of failure mode(s), testing protocol, data acquisition equipment, and resulting data from the test sequence. ORNL will analyze this data for quality, and subsequently via the nonlinear paradigm for prognostication. Task 2.2--ORNL will evaluate the prognostication capability of the nonlinear paradigm. The comparison metrics for reliability of the predictions will include the true positives, true negatives, and the forewarning times. Task 2.3--ORNL will improve the nonlinear paradigm as appropriate, in accord with the results of Tasks 2.1-2.2, to maximize the rate of true positive and true negative indications of failure. Maximal forewarning time is also highly desirable. Task 2.4--ORNL will develop advanced algorithms for the phase-space distribution function (PS-DF) pattern change recognition, based on the results of Task 2.3. This implementation will provide a capability for automated prognostication, as part of the maintenance decision-making. Appendix A provides a detailed description of the analysis methods, which include conventional statistics, traditional nonlinear measures, and ORNL's patented nonlinear PSDM. The body of this report focuses on results of this analysis.« less

Shuttle Ground Support Equipment (GSE) T-0 Umbilical to Space Shuttle Program (SSP) Flight Elements Consultation

NASA Technical Reports Server (NTRS)

Wilson, Timmy R.; Kichak, Robert A.; McManamen, John P.; Kramer-White, Julie; Raju, Ivatury S.; Beil, Robert J.; Weeks, John F.; Elliott, Kenny B.

2009-01-01

The NASA Engineering and Safety Center (NESC) was tasked with assessing the validity of an alternate opinion that surfaced during the investigation of recurrent failures at the Space Shuttle T-0 umbilical interface. The most visible problem occurred during the Space Transportation System (STS)-112 launch when pyrotechnics used to separate Solid Rocket Booster (SRB) Hold-Down Post (HDP) frangible nuts failed to fire. Subsequent investigations recommended several improvements to the Ground Support Equipment (GSE) and processing changes were implemented, including replacement of ground-half cables and connectors between flights, along with wiring modifications to make critical circuits quad-redundant across the interface. The alternate opinions maintained that insufficient data existed to exonerate the design, that additional data needed to be gathered under launch conditions, and that the interface should be further modified to ensure additional margin existed to preclude failure. The results of the assessment are contained in this report.

[Testing and commercialization of a cotton stalk shredder and plow]. Technical progress report, October--December 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thacker, G.W.

1996-01-27

This quarterly report describes work on Task 1: Field test and sell prototype to Ellis Equipment, Ltd; Task 2: Design, build, and field test two prototypes; and Task 3: Produce and sell Pegasus to farmers. The equipment has been built to shred stalks, deeply till the soil, and prepare seedbeds for cotton plants. The equipment has been field tested in Australia and is currently being field tested in California and Arizona. Unexpected problems appeared with hard dry soils and this report describes improvements made.

30 CFR 75.902-4 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Attachment of ground conductors and ground check wires to equipment frames; use of separate connections. 75.902-4 Section 75.902-4 Mineral... § 75.902-4 Attachment of ground conductors and ground check wires to equipment frames; use of separate...

30 CFR 75.902-4 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Attachment of ground conductors and ground check wires to equipment frames; use of separate connections. 75.902-4 Section 75.902-4 Mineral... § 75.902-4 Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Construction operations for an early lunar base

NASA Technical Reports Server (NTRS)

Graf, John

1988-01-01

Six construction tasks identified as activities likely to be performed at an early lunar base are described: initializing the habitation module, preparing a landing site, transferring payload off the lander, smoothing roads, constructing the inflatable structure, and excavating for lunar oxygen production. Requirements for each task are given, and a point design capable of meeting the task requirements is described. EVA needs are listed for each task. The equipment used to perform these tasks is described. It is noted that all the tasks can be performed with three common vehicles (a rover, a truck, and an excavator) and some shared equipment.

Multi-tasking computer control of video related equipment

NASA Technical Reports Server (NTRS)

Molina, Rod; Gilbert, Bob

1989-01-01

The flexibility, cost-effectiveness and widespread availability of personal computers now makes it possible to completely integrate the previously separate elements of video post-production into a single device. Specifically, a personal computer, such as the Commodore-Amiga, can perform multiple and simultaneous tasks from an individual unit. Relatively low cost, minimal space requirements and user-friendliness, provides the most favorable environment for the many phases of video post-production. Computers are well known for their basic abilities to process numbers, text and graphics and to reliably perform repetitive and tedious functions efficiently. These capabilities can now apply as either additions or alternatives to existing video post-production methods. A present example of computer-based video post-production technology is the RGB CVC (Computer and Video Creations) WorkSystem. A wide variety of integrated functions are made possible with an Amiga computer existing at the heart of the system.

Blinks, saccades, and fixation pauses during vigilance task performance. I., Time on task.

DOT National Transportation Integrated Search

1994-12-01

In the future, operators of complex equipment will spend more time monitoring computer controlled devices rather than having hands on control of such equipment. The operator intervenes in system operation under "unusual" conditions or when there is a...

Task Progression Strategies

ERIC Educational Resources Information Center

Ryan, Stu; Baxter, Karen; Waller, Cassandra

2017-01-01

Teachers are often challenged with trying to determine the most effective way of developing task progression. Following developmentally appropriate steps that will lead to effective skill development can facilitate student learning. Using the acronym NEMWPT--which stands for No equipment, Equipment, Movement, Wall work, Partners, and Teams--may…

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Commander Eileen Collins looks over flight equipment in the Orbiter Processing Facility, along with Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Commander Eileen Collins looks over flight equipment in the Orbiter Processing Facility, along with Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

An intelligent robot for helping astronauts

NASA Technical Reports Server (NTRS)

Erickson, J. D.; Grimm, K. A.; Pendleton, T. W.

1994-01-01

This paper describes the development status of a prototype supervised intelligent robot for space application for purposes of (1) helping the crew of a spacecraft such as the Space Station with various tasks, such as holding objects and retrieving/replacing tools and other objects from/into storage, and (2) for purposes of retrieving detached objects, such as equipment or crew, that have become separated from their spacecraft. In addition to this set of tasks in this low-Earth-orbiting spacecraft environment, it is argued that certain aspects of the technology can be viewed as generic in approach, thereby offering insight into intelligent robots for other tasks and environments. Candidate software architectures and their key technical issues which enable real work in real environments to be accomplished safely and robustly are addressed. Results of computer simulations of grasping floating objects are presented. Also described are characterization results on the usable reduced gravity environment in an aircraft flying parabola (to simulate weightlessness) and results on hardware performance there. These results show it is feasible to use that environment for evaluative testing of dexterous grasping based on real-time vision of freely rotating and translating objects.

Barriers to success: physical separation optimizes event-file retrieval in shared workspaces.

PubMed

Klempova, Bibiana; Liepelt, Roman

2017-07-08

Sharing tasks with other persons can simplify our work and life, but seeing and hearing other people's actions may also be very distracting. The joint Simon effect (JSE) is a standard measure of referential response coding when two persons share a Simon task. Sequential modulations of the joint Simon effect (smJSE) are interpreted as a measure of event-file processing containing stimulus information, response information and information about the just relevant control-state active in a given social situation. This study tested effects of physical (Experiment 1) and virtual (Experiment 2) separation of shared workspaces on referential coding and event-file processing using a joint Simon task. In Experiment 1, participants performed this task in individual (go-nogo), joint and standard Simon task conditions with and without a transparent curtain (physical separation) placed along the imagined vertical midline of the monitor. In Experiment 2, participants performed the same tasks with and without receiving background music (virtual separation). For response times, physical separation enhanced event-file retrieval indicated by an enlarged smJSE in the joint Simon task with curtain than without curtain (Experiment1), but did not change referential response coding. In line with this, we also found evidence for enhanced event-file processing through physical separation in the joint Simon task for error rates. Virtual separation did neither impact event-file processing, nor referential coding, but generally slowed down response times in the joint Simon task. For errors, virtual separation hampered event-file processing in the joint Simon task. For the cognitively more demanding standard two-choice Simon task, we found music to have a degrading effect on event-file retrieval for response times. Our findings suggest that adding a physical separation optimizes event-file processing in shared workspaces, while music seems to lead to a more relaxed task processing mode under shared task conditions. In addition, music had an interfering impact on joint error processing and more generally when dealing with a more complex task in isolation.

47 CFR 64.702 - Furnishing of enhanced services and customer-premises equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... separate operating, marketing, installation, and maintenance personnel, and utilize separate computer... available to the separate corporation any capacity or computer system component on its computer system or... Enhanced Services and Customer-Premises Equipment by Bell Operating Companies; Telephone Operator Services...

47 CFR 64.702 - Furnishing of enhanced services and customer-premises equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... separate operating, marketing, installation, and maintenance personnel, and utilize separate computer... available to the separate corporation any capacity or computer system component on its computer system or... Enhanced Services and Customer-Premises Equipment by Bell Operating Companies; Telephone Operator Services...

47 CFR 64.702 - Furnishing of enhanced services and customer-premises equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... separate operating, marketing, installation, and maintenance personnel, and utilize separate computer... available to the separate corporation any capacity or computer system component on its computer system or... Enhanced Services and Customer-Premises Equipment by Bell Operating Companies; Telephone Operator Services...

47 CFR 64.702 - Furnishing of enhanced services and customer-premises equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... separate operating, marketing, installation, and maintenance personnel, and utilize separate computer... available to the separate corporation any capacity or computer system component on its computer system or... Enhanced Services and Customer-Premises Equipment by Bell Operating Companies; Telephone Operator Services...

47 CFR 64.702 - Furnishing of enhanced services and customer-premises equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... separate operating, marketing, installation, and maintenance personnel, and utilize separate computer... available to the separate corporation any capacity or computer system component on its computer system or... Enhanced Services and Customer-Premises Equipment by Bell Operating Companies; Telephone Operator Services...

Equipment-Device Task Commonality Analysis and Transfer of Training.

ERIC Educational Resources Information Center

Caro, Paul W.

Procedures were developed to enable training personnel systematically and objectively to determine the potential utility of training devices for teaching how to perform missions in operational rotary wing aircraft. These procedures allow comparison of task stimulus and response elements with corresponding elements in synthetic training equipment.…

Operation Cobra: Organizational Pooling and Operational Art in the European Theater

DTIC Science & Technology

2017-05-25

an organizational structure based on the idea of “task organizing” and “force pooling.” Task organizing involves the development of situation...essential equipment and personnel based on the day-to-day needs of that unit. A unit that carried enough bridging equipment or truck transport to...in two forms: MSC’s Afloat Pre-positioning Force (APF) and land- based pre-positioned equipment . In the APF, all ships are self-sustaining and have

10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Illustrative List of Lithium Isotope Separation Facilities... Appendix N to Part 110—Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority a. Facilities or plants for the separation of lithium isotopes. b...

10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Illustrative List of Lithium Isotope Separation Facilities... Appendix N to Part 110—Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority a. Facilities or plants for the separation of lithium isotopes. b...

10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Illustrative List of Lithium Isotope Separation Facilities... Appendix N to Part 110—Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority a. Facilities or plants for the separation of lithium isotopes. b...

10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Illustrative List of Lithium Isotope Separation Facilities... Appendix N to Part 110—Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority a. Facilities or plants for the separation of lithium isotopes. b...

10 CFR Appendix N to Part 110 - Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Illustrative List of Lithium Isotope Separation Facilities... Appendix N to Part 110—Illustrative List of Lithium Isotope Separation Facilities, Plants and Equipment Under NRC's Export Licensing Authority a. Facilities or plants for the separation of lithium isotopes. b...

10 CFR Appendix G to Part 110 - Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Illustrative List of Plasma Separation Enrichment Plant... Appendix G to Part 110—Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export Licensing Authority Note—In the plasma separation process, a plasma of uranium ions...

10 CFR Appendix G to Part 110 - Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Illustrative List of Plasma Separation Enrichment Plant... Appendix G to Part 110—Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export Licensing Authority Note—In the plasma separation process, a plasma of uranium ions...

10 CFR Appendix G to Part 110 - Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Illustrative List of Plasma Separation Enrichment Plant... Appendix G to Part 110—Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export Licensing Authority Note—In the plasma separation process, a plasma of uranium ions...

10 CFR Appendix G to Part 110 - Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Illustrative List of Plasma Separation Enrichment Plant... Appendix G to Part 110—Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export Licensing Authority Note—In the plasma separation process, a plasma of uranium ions...

10 CFR Appendix G to Part 110 - Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Illustrative List of Plasma Separation Enrichment Plant... Appendix G to Part 110—Illustrative List of Plasma Separation Enrichment Plant Equipment and Components Under NRC Export Licensing Authority Note: In the plasma separation process, a plasma of uranium ions...

Television Equipment Repair Career Ladder. Occupational Survey Report.

ERIC Educational Resources Information Center

Air Force Occupational Measurement Center, Lackland AFB, TX.

The report describes the results of an Air Force occupational survey of the television equipment repair career ladder. A job inventory, administered to 808 job incumbents, consisted of a background information section and a duty-task list designed to assess the relative amount of time spent on tasks performed in current jobs. The resulting…

Identifying Anomalous Behaviour in AIS Data: Loitering and Gaps in Transmission as Indicators of IUU Associated Behaviour.

NASA Astrophysics Data System (ADS)

Ford, J.; Peel, D.; Wilcox, C.; Kroodsma, D.

2016-12-01

Identifying anomalous behaviour associated with Illegal, Unreported and Unregulated (IUU) fishing including supportive activities such as transshipment, is a key step to combating IUU fishing. We use spatial statistical models and Automatic Identification System (AIS) data to identify anomalous activity, specifically various indicators of loitering behaviours (for example, vessels travelling slower than expected, perhaps rendezvousing for transshipment), and gaps in AIS transmissions. Gaps occur for three basic reasons: saturation of the system in locations with high vessel density; poor quality transmissions due to equipment on the vessel or receiver; and intentional disabling of AIS transmitters. Resolving which of these mechanisms is generating gaps in transmissions from a given vessel is a critical task in using AIS to monitor vessels. Moreover, separating saturation and equipment issues from intentional disabling is a useful task in risk identification of IUU associated behaviour. Using this information on loitering behaviour and gaps in transmission, we identify and rank vessels which appear to be acting anomalously, with a focus on identifying potential IUU related activities. This information, combined with other sources of data, could help support enforcement agencies to implement international strategies such as the Port State Measures Agreement. A global list of such vessels and historical evidence of anomalous behaviour, would increase local powers of protection and provide one more step toward transparency within global fisheries.

40 CFR 60.692-3 - Standards: Oil-water separators.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Emissions From Petroleum Refinery Wastewater Systems § 60.692-3 Standards: Oil-water separators. (a) Each... wastewater shall, in addition to the requirements in paragraph (a) of this section, be equipped and operated... wastewater which was equipped and operated with a fixed roof covering the entire separator tank or a portion...

40 CFR 60.692-3 - Standards: Oil-water separators.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Emissions From Petroleum Refinery Wastewater Systems § 60.692-3 Standards: Oil-water separators. (a) Each... wastewater shall, in addition to the requirements in paragraph (a) of this section, be equipped and operated... wastewater which was equipped and operated with a fixed roof covering the entire separator tank or a portion...

Advanced flight hardware for organic separations using aqueous two-phase partitioning

NASA Astrophysics Data System (ADS)

Deuser, Mark S.; Vellinger, John C.; Weber, John T.

1996-03-01

Separation of cells and cell components is the limiting factor in many biomedical research and pharmaceutical development processes. Aqueous Two-Phase Partitioning (ATPP) is a unique separation technique which allows purification and classification of biological materials. SHOT has employed the ATPP process in separation equipment developed for both space and ground applications. Initial equipment development and research focused on the ORganic SEParation (ORSEP) space flight experiments that were performed on suborbital rockets and the shuttle. ADvanced SEParations (ADSEP) technology was developed as the next generation of ORSEP equipment through a NASA Small Business Innovation Research (SBIR) contract. Under the SBIR contract, a marketing study was conducted, indicating a growing commercial market exists among biotechnology firms for ADSEP equipment and associated flight research and development services. SHOT is preparing to begin manufacturing and marketing laboratory versions of the ADSEP hardware for the ground-based market. In addition, through a self-financed SBIR Phase III effort, SHOT is fabricating and integrating the ADSEP flight hardware for a commercially-driven SPACEHAB 04 experiment that will be the initial step in marketing space separations services. The ADSEP ground-based and microgravity research is expected to play a vital role in developing important new biomedical and pharmaceutical products.

AORN ergonomic tool 7: pushing, pulling, and moving equipment on wheels.

PubMed

Waters, Thomas; Lloyd, John D; Hernandez, Edward; Nelson, Audrey

2011-09-01

Pushing and pulling equipment in and around the OR can place high shear force demands on perioperative team members' shoulder and back muscles and joints. These high forces may lead to work-related musculoskeletal disorders. AORN Ergonomic Tool 7: Pushing, Pulling, and Moving Equipment on Wheels can help perioperative team members assess the risk of pushing and pulling tasks in the perioperative setting. The tool provides evidence-based suggestions about when assistive devices should be used for these tasks and is based on current ergonomic safety concepts, scientific evidence, and knowledge of effective technology and procedures, including equipment and devices for safe patient handling. Published by Elsevier Inc.

A method of operation scheduling based on video transcoding for cluster equipment

NASA Astrophysics Data System (ADS)

Zhou, Haojie; Yan, Chun

2018-04-01

Because of the cluster technology in real-time video transcoding device, the application of facing the massive growth in the number of video assignments and resolution and bit rate of diversity, task scheduling algorithm, and analyze the current mainstream of cluster for real-time video transcoding equipment characteristics of the cluster, combination with the characteristics of the cluster equipment task delay scheduling algorithm is proposed. This algorithm enables the cluster to get better performance in the generation of the job queue and the lower part of the job queue when receiving the operation instruction. In the end, a small real-time video transcode cluster is constructed to analyze the calculation ability, running time, resource occupation and other aspects of various algorithms in operation scheduling. The experimental results show that compared with traditional clustering task scheduling algorithm, task delay scheduling algorithm has more flexible and efficient characteristics.

Analysis of remote operating systems for space-based servicing operations. Volume 2: Study results

NASA Technical Reports Server (NTRS)

1985-01-01

The developments in automation and robotics have increased the importance of applications for space based servicing using remotely operated systems. A study on three basic remote operating systems (teleoperation, telepresence and robotics) was performed in two phases. In phase one, requirements development, which consisted of one three-month task, a group of ten missions were selected. These included the servicing of user equipment on the station and the servicing of the station itself. In phase two, concepts development, which consisted of three tasks, overall system concepts were developed for the selected missions. These concepts, which include worksite servicing equipment, a carrier system, and payload handling equipment, were evaluated relative to the configurations of the overall worksite. It is found that the robotic/teleoperator concepts are appropriate for relatively simple structured tasks, while the telepresence/teleoperator concepts are applicable for missions that are complex, unstructured tasks.

Design and preliminary validation of a mobile application-based expert system to facilitate repair of medical equipment in resource-limited health settings.

PubMed

Wong, Alison L; Lacob, Kelly M; Wilson, Madeline G; Zwolski, Stacie M; Acharya, Soumyadipta

2018-01-01

One of the greatest barriers to safe surgery is the availability of functional biomedical equipment. Biomedical technicians play a major role in ensuring that equipment is functional. Following in-field observations and an online survey, a mobile application was developed to aid technicians in troubleshooting biomedical equipment. It was hypothesized that this application could be used to aid technicians in equipment repair, as modeled by repair of a pulse oximeter. To identify specific barriers to equipment repair and maintenance for biomedical technicians, an online survey was conducted to determine current practices and challenges. These findings were used to guide the development of a mobile application system that guides technicians through maintenance and repair tasks. A convenience sample of technicians in Ethiopia tested the application using a broken pulse oximeter task and following this completed usability and content validity surveys. Fifty-three technicians from 13 countries responded to the initial survey. The results of the survey showed that technicians find equipment manuals most useful, but these are not easily accessible. Many do not know how to or are uncomfortable reaching out to human resources. Thirty-three technicians completed the broken pulse oximeter task using the application. All were able to appropriately identify and repair the equipment, and post-task surveys of usability and content validity demonstrated highly positive scores (Agree to Strongly Agree) on both scales. This research demonstrates the need for improved access to resources for technicians and shows that a mobile application can be used to address a gap in the access to knowledge and resources in low- and middle-income countries. Further research will include prospective studies to determine the impact of an application on the availability of functional equipment in a hospital and the effect on the provision and safety of surgical care.

Airborne Management of Traffic Conflicts in Descent With Arrival Constraints

NASA Technical Reports Server (NTRS)

Doble, Nathan A.; Barhydt, Richard; Krishnamurthy, Karthik

2005-01-01

NASA is studying far-term air traffic management concepts that may increase operational efficiency through a redistribution of decisionmaking authority among airborne and ground-based elements of the air transportation system. One component of this research, En Route Free Maneuvering, allows trained pilots of equipped autonomous aircraft to assume responsibility for traffic separation. Ground-based air traffic controllers would continue to separate traffic unequipped for autonomous operations and would issue flow management constraints to all aircraft. To evaluate En Route Free Maneuvering operations, a human-in-the-loop experiment was jointly conducted by the NASA Ames and Langley Research Centers. In this experiment, test subject pilots used desktop flight simulators to resolve conflicts in cruise and descent, and to adhere to air traffic flow constraints issued by test subject controllers. Simulators at NASA Langley were equipped with a prototype Autonomous Operations Planner (AOP) flight deck toolset to assist pilots with conflict management and constraint compliance tasks. Results from the experiment are presented, focusing specifically on operations during the initial descent into the terminal area. Airborne conflict resolution performance in descent, conformance to traffic flow management constraints, and the effects of conflicting traffic on constraint conformance are all presented. Subjective data from subject pilots are also presented, showing perceived levels of workload, safety, and acceptability of autonomous arrival operations. Finally, potential AOP functionality enhancements are discussed along with suggestions to improve arrival procedures.

Life science payload definition and integration study, task C and D. Volume 3: Appendices

NASA Technical Reports Server (NTRS)

1973-01-01

Research equipment requirements were based on the Mini-7 and Mini-30 laboratory concepts defined in Tasks A and B of the intial LSPD contract. Modified versions of these laboratories and the research equipment within them were to be used in three missions of Shuttle/Sortie Module. These were designated (1) the shared 7-day laboratory (a mission with the life sciences laboratory sharing the sortie module with another scientific laboratory), (2) the dedicated 7-day laboratory (full use of the sortie module), and (3) the dedicated 30-day laboratory (full sortie module use with a 30-day mission duration). In defining the research equipment requirements of these laboratories, the equipment was grouped according to its function, and equipment unit data packages were prepared.

Ethnic and Sex Differences in Ownership of Preventive Health Equipment Among Rural Older Adults With Diabetes

PubMed Central

Bell, Ronny A.; Arcury, Thomas A.; Stafford, Jeanette M.; Golden, Shannon L.; Snively, Beverly M.; Quandt, Sara A.

2008-01-01

Context Diabetes self-management is important for achieving successful health outcomes. Different levels of self-management have been reported among various populations, though little is known about ownership of equipment that can enhance accomplishment of these tasks. Purpose This study examined diabetes self-management equipment ownership among rural older adults. Methods Participants included African American, American Indian, and white men and women 65 years of age and older. Data included equipment ownership overall and by ethnicity and sex across diabetes self-management domains (glucose monitoring, foot care, medication adherence, exercise, and diet). Associations between equipment ownership and demographic and health characteristics were assessed using logistic regression. Findings Equipment ownership ranged from 85.0% for blood glucose meters to less than 11% for special socks, modified dishes, and various forms of home exercise equipment. Equipment ownership was associated with ethnicity, living arrangements, mobility, poverty status, and formal education. Conclusions Rural older adults with diabetes are at risk because they lack equipment to perform some self-management tasks. Providers should be sensitive to and assist patients in overcoming this barrier. PMID:17868240

Ethnic and sex differences in ownership of preventive health equipment among rural older adults with diabetes.

PubMed

Bell, Ronny A; Arcury, Thomas A; Stafford, Jeanette M; Golden, Shannon L; Snively, Beverly M; Quandt, Sara A

2007-01-01

Diabetes self-management is important for achieving successful health outcomes. Different levels of self-management have been reported among various populations, though little is known about ownership of equipment that can enhance accomplishment of these tasks. This study examined diabetes self-management equipment ownership among rural older adults. Participants included African American, American Indian, and white men and women 65 years of age and older. Data included equipment ownership overall and by ethnicity and sex across diabetes self-management domains (glucose monitoring, foot care, medication adherence, exercise, and diet). Associations between equipment ownership and demographic and health characteristics were assessed using logistic regression. Equipment ownership ranged from 85.0% for blood glucose meters to less than 11% for special socks, modified dishes, and various forms of home exercise equipment. Equipment ownership was associated with ethnicity, living arrangements, mobility, poverty status, and formal education. Rural older adults with diabetes are at risk because they lack equipment to perform some self-management tasks. Providers should be sensitive to and assist patients in overcoming this barrier.

ARBAN-A new method for analysis of ergonomic effort.

PubMed

Holzmann, P

1982-06-01

ARBAN is a method for the ergonomic analysis of work, including work situations which involve widely differing body postures and loads. The idea of the method is thal all phases of the analysis process that imply specific knowledge on ergonomics are teken over by filming equipment and a computer routine. All tasks that must be carried out by the investigator in the process of analysis are so designed that they appear as evident by the use of systematic common sense. The ARBAN analysis method contains four steps: 1. Recording of the workplace situation on video or film. 2. Coding the posture and load situation at a number of closely spaced 'frozen' situations. 3. Computerisation. 4. Evaluation of the results. The computer calculates figures for the total ergonomic stress on the whole body as well as on different parts of the body separately. They are presented as 'Ergonomic stress/ time curves', where the heavy load situations occur as peaks of the curve. The work cycle may also be divided into different tasks, where the stress and duration patterns can be compared. The integral of the curves are calculated for single-figure comparison of different tasks as well as different work situations.

SRT and SBRT: Current practices for QA dosimetry and 3D

NASA Astrophysics Data System (ADS)

Benedict, S. H.; Cai, J.; Libby, B.; Lovelock, M.; Schlesinger, D.; Sheng, K.; Yang, W.

2010-11-01

The major feature that separates stereotactic radiation therapy (cranial SRT) and stereotactic body radiation therapy (SBRT) from conventional radiation treatment is the delivery of large doses in a few fractions which results in a high biological effective dose (BED). In order to minimize the normal tissue toxicity, quality assurance of the conformation of high doses to the target and rapid fall off doses away from the target is critical. The practice of SRT and SBRT therefore requires a high-level of confidence in the accuracy of the entire treatment delivery process. In SRT and SBRT confidence in this accuracy is accomplished by the integration of modern imaging, simulation, treatment planning and delivery technologies into all phases of the treatment process; from treatment simulation and planning and continuing throughout beam delivery. In this report some of the findings of Task group 101 of the AAPM will be presented which outlines the best-practice guidelines for SBRT. The task group report includes a review of the literature to identify reported clinical findings and expected outcomes for this treatment modality. Information in this task group is provided for establishing an SBRT program, including protocols, equipment, resources, and QA procedures.

GreenChill Store Certification Protocol for Sub-Cooling Contained on Racks Separate from Refrigeration Equipment

EPA Pesticide Factsheets

Document describes the protocol used to determine the total load and refrigerant charge of stores that have placed all sub-cooling on a rack separate from all other commercial refrigeration equipment.

PV-Diesel Hybrid SCADA Experiment Network Design

NASA Technical Reports Server (NTRS)

Kalu, Alex; Durand, S.; Emrich, Carol; Ventre, G.; Wilson, W.; Acosta, R.

1999-01-01

The essential features of an experimental network for renewable power system satellite based supervisory, control and data acquisition (SCADA) are communication links, controllers, diagnostic equipment and a hybrid power system. Required components for implementing the network consist of two satellite ground stations, to satellite modems, two 486 PCs, two telephone receivers, two telephone modems, two analog telephone lines, one digital telephone line, a hybrid-power system equipped with controller and a satellite spacecraft. In the technology verification experiment (TVE) conducted by Savannah State University and Florida Solar Energy Center, the renewable energy hybrid system is the Apex-1000 Mini-Hybrid which is equipped with NGC3188 for user interface and remote control and the NGC2010 for monitoring and basic control tasks. This power system is connected to a satellite modem via a smart interface, RS232. Commands are sent to the power system control unit through a control PC designed as PC1. PC1 is thus connected to a satellite model through RS232. A second PC, designated PC2, the diagnostic PC is connected to both satellite modems via separate analog telephone lines for checking modems'health. PC2 is also connected to PC1 via a telephone line. Due to the unavailability of a second ground station for the ACTS, one ground station is used to serve both the sending and receiving functions in this experiment. Signal is sent from the control PC to the Hybrid system at a frequency f(sub 1), different from f(sub 2), the signal from the hybrid system to the control PC. f(sub l) and f(sub 2) are sufficiently separated to avoid interference.

Demonstration of the Low-Cost Virtual Collaborative Environment (VCE)

NASA Technical Reports Server (NTRS)

Bowers, David; Montes, Leticia; Ramos, Angel; Joyce, Brendan; Lumia, Ron

1997-01-01

This paper demonstrates the feasibility of a low-cost approach of remotely controlling equipment. Our demonstration system consists of a PC, the PUMA 560 robot with Barrett hand, and commercially available controller and teleconferencing software. The system provides a graphical user interface which allows a user to program equipment tasks and preview motions i.e., simulate the results. Once satisfied that the actions are both safe and accomplish the task, the remote user sends the data over the Internet to the local site for execution on the real equipment. A video link provides visual feedback to the remote sight. This technology lends itself readily to NASA's upcoming Mars expeditions by providing remote simulation and control of equipment.

AORN Ergonomic Tool 6: lifting and carrying supplies and equipment in the perioperative setting.

PubMed

Waters, Thomas; Baptiste, Andrea; Short, Manon; Plante-Mallon, Lori; Nelson, Audrey

2011-08-01

Perioperative team members often are required to lift and carry heavy supplies and equipment into and around the OR; this includes lifting equipment such as hand tables, fluoroscopy boards, stirrups, Wilson frames, irrigation containers for lithotripsy, and heavy instrument pans. Lifting heavy objects creates considerable risk for musculoskeletal injuries to the back and shoulders. AORN Ergonomic Tool 6: Lifting and Carrying Supplies and Equipment in the Perioperative Setting can help caregivers evaluate lifting and carrying tasks and take measures to protect themselves from injury. Caregivers can use the revised National Institute for Occupational Safety and Health lifting equation to assess whether a specific lifting task can be performed safely. Published by Elsevier Inc.

Status of TMI-2 instruments and electrical components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Helbert, H J

In the Task 1.0 section of the GEND 001 Planning Report, the Instrumentation and Electrical Equipment Survivability Planning Group (IEPG) supplied planning, guidance, and recommendations on collecting survivability data on instruments and electrical equipment involved in the March 28, 1979, accident at the Three Mile Island Unit 2 (TMI-2) Reactor. GEND 001 recommended collection of further data on the status of all the instruments and electrical equipment it listed. The current report supplies information concerning the operational status of instruments and electrical equipment listed in the Task 1.0 section of GEND 001. This document will be updated in the futuremore » as additional information is obtained.« less

Small Engine and Related Equipment Repair Curriculum Guide. Michigan Trade and Industrial Education.

ERIC Educational Resources Information Center

Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.

This task-based curriculum guide for small engine and related equipment repair is intended to help the teacher develop a classroom management system where students learn by doing. Introductory materials include a Dictionary of Occupational Titles job code and title sheet, a career ladder, a matrix relating duty/task numbers to job titles, and a…

Cybersecurity of Critical Control Networks

DTIC Science & Technology

2015-07-14

project are included below. The tasks include work in link encryption for existing legacy SCADA equipment, where we continue to develop lightweight...language for authoring and monitoring compliance of SCADA systems, including technologies for a “policy monitor” which reports out on any observance issues...Acquisition ( SCADA ). Details of each project are included below. The tasks include work in link encryption for existing legacy SCADA equipment

Crew procedures for microwave landing system operations

NASA Technical Reports Server (NTRS)

Summers, Leland G.

1987-01-01

The objective of this study was to identify crew procedures involved in Microwave Landing System (MLS) operations and to obtain a preliminary assessment of crew workload. The crew procedures were identified for three different complements of airborne equipment coupled to an autopilot. Using these three equipment complements, crew tasks were identified for MLS approaches and precision departures and compared to an ILS approach and a normal departure. Workload comparisons between the approaches and departures were made by using a task-timeline analysis program that obtained workload indexes, i.e., the radio of time required to complete the tasks to the time available. The results showed an increase in workload for the MLS scenario for one of the equipment complements. However, even this workload was within the capacity of two crew members.

Heavy construction equipment noise study using dosimetry and time-motion studies

NASA Astrophysics Data System (ADS)

Spencer, Ellsworth R.; Yantek, David S.

2005-09-01

Noise-induced hearing loss continues to afflict workers in many occupational settings despite longstanding recognition of the problems and well-known methods of prevention and regulations. Sound levels associated with heavy construction equipment range from 80 to 120 dB(A) and power tools commonly used in construction produce sound levels up to 115 dB(A). The focus of the research was to determine the noise exposures of heavy construction equipment operators while documenting the workers' tasks, (i.e., hauling, moving, and/or pushing construction material). Time-motion studies were performed at the construction sites and were used to correlate the noise dosage with the work performed by equipment operators. The cumulative dose for the operator was then plotted with references to work tasks, to identify the tasks that caused the greatest noise exposure. Three construction sites were examined and located in the western Pennsylvania and eastern Ohio areas. The types of construction equipment studied included asphalt pavers, backhoes, bulldozers, compaction equipment, excavators, haul trucks, telehandlers, and wheeled loaders. The results showed that bulldozer operators consistently had the highest noise exposures, ranging from a NIOSH REL (Recommended Exposure Limit) dose of 844% to 25836% and an OSHA PEL (Permissible Exposure Limit) dose of 139% to 1397%.

Advanced flight hardware for organic separations

NASA Astrophysics Data System (ADS)

Deuser, Mark S.; Vellinger, John C.; Weber, John T.

1997-01-01

Aqueous Two-Phase Partitioning (ATPP) is a unique separation technique which allows purification and classification of biological materials. SHOT has employed the ATPP process in separation equipment developed for both space and ground applications. Initial equipment development and research focused on the ORganic SEParation (ORSEP) space flight experiments that were performed on suborbital rockets and the shuttle. ADvanced SEParations (ADSEP) technology was developed as the next generation of ORSEP equipment through a NASA Small Business Innovation Research (SBIR) contract. Under the SBIR contract, a marketing study was conducted, indicating a growing commercial market exists among biotechnology firms for ADSEP equipment and associated flight research and development services. SHOT is preparing to begin manufacturing and marketing laboratory versions of the ADSEP hardware for the ground-based market. In addition, through a self-financed SBIR Phase III effort, SHOT fabricated and integrated the ADSEP flight hardware for a commercially-driven flight experiment as the initial step in marketing space processing services. The ADSEP ground-based and microgravity research is expected to play a vital role in developing important new biomedical and pharmaceutical products.

HVS-based quantization steps for validation of digital cinema extended bitrates

NASA Astrophysics Data System (ADS)

Larabi, M.-C.; Pellegrin, P.; Anciaux, G.; Devaux, F.-O.; Tulet, O.; Macq, B.; Fernandez, C.

2009-02-01

In Digital Cinema, the video compression must be as transparent as possible to provide the best image quality to the audience. The goal of compression is to simplify transport, storing, distribution and projection of films. For all those tasks, equipments need to be developed. It is thus mandatory to reduce the complexity of the equipments by imposing limitations in the specifications. In this sense, the DCI has fixed the maximum bitrate for a compressed stream to 250 Mbps independently from the input format (4K/24fps, 2K/48fps or 2K/24fps). The work described in this paper This parameter is discussed in this paper because it is not consistent to double/quadruple the input rate without increasing the output rate. The work presented in this paper is intended to define quantization steps ensuring the visually lossless compression. Two steps are followed first to evaluate the effect of each subband separately and then to fin the scaling ratio. The obtained results show that it is necessary to increase the bitrate limit for cinema material in order to achieve the visually lossless.

Characterization of Fine Metal Particles Derived from Shredded WEEE Using a Hyperspectral Image System: Preliminary Results

PubMed Central

Candiani, Gabriele; Picone, Nicoletta; Pompilio, Loredana; Pepe, Monica; Colledani, Marcello

2017-01-01

Waste of electric and electronic equipment (WEEE) is the fastest-growing waste stream in Europe. The large amount of electric and electronic products introduced every year in the market makes WEEE disposal a relevant problem. On the other hand, the high abundance of key metals included in WEEE has increased the industrial interest in WEEE recycling. However, the high variability of materials used to produce electric and electronic equipment makes key metals’ recovery a complex task: the separation process requires flexible systems, which are not currently implemented in recycling plants. In this context, hyperspectral sensors and imaging systems represent a suitable technology to improve WEEE recycling rates and the quality of the output products. This work introduces the preliminary tests using a hyperspectral system, integrated in an automatic WEEE recycling pilot plant, for the characterization of mixtures of fine particles derived from WEEE shredding. Several combinations of classification algorithms and techniques for signal enhancement of reflectance spectra were implemented and compared. The methodology introduced in this study has shown characterization accuracies greater than 95%. PMID:28505070

Development of educational image databases and e-books for medical physics training.

PubMed

Tabakov, S; Roberts, V C; Jonsson, B-A; Ljungberg, M; Lewis, C A; Wirestam, R; Strand, S-E; Lamm, I-L; Milano, F; Simmons, A; Deane, C; Goss, D; Aitken, V; Noel, A; Giraud, J-Y; Sherriff, S; Smith, P; Clarke, G; Almqvist, M; Jansson, T

2005-09-01

Medical physics education and training requires the use of extensive imaging material and specific explanations. These requirements provide an excellent background for application of e-Learning. The EU projects Consortia EMERALD and EMIT developed five volumes of such materials, now used in 65 countries. EMERALD developed e-Learning materials in three areas of medical physics (X-ray diagnostic radiology, nuclear medicine and radiotherapy). EMIT developed e-Learning materials in two further areas: ultrasound and magnetic resonance imaging. This paper describes the development of these e-Learning materials (consisting of e-books and educational image databases). The e-books include tasks helping studying of various equipment and methods. The text of these PDF e-books is hyperlinked with respective images. The e-books are used through the readers' own Internet browser. Each Image Database (IDB) includes a browser, which displays hundreds of images of equipment, block diagrams and graphs, image quality examples, artefacts, etc. Both the e-books and IDB are engraved on five separate CD-ROMs. Demo of these materials can be taken from www.emerald2.net.

Farm Equipment Mechanic. Occupational Analyses Series.

ERIC Educational Resources Information Center

Ross, Douglas

This analysis covers tasks performed by a farm equipment mechanic, an occupational title some provinces and territories of Canada have also identified as agricultural machinery technician, agricultural mechanic, and farm equipment service technician. A guide to analysis discusses development, structure, and validation method; scope of the…

40 CFR 63.1255 - Standards: Equipment leaks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... tasks (e.g., weekly, monthly, quarterly, annual) refer to the standard calendar periods unless specified... completion of required tasks may be changed by mutual agreement between the owner or operator and the... there remain at least 3 days for tasks that must be performed weekly, at least 2 weeks for tasks that...

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Geriatric Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This task analysis for nursing education provides performance standards, steps to be followed, knowledge required, attitudes to be developed, safety procedures, and equipment and supplies needed for 13 tasks performed by geriatric aides in the duty area of performing diagnostic measures and for 30 tasks in the duty area of providing therapeutic…

9 CFR 307.7 - Safety requirements for electrical stimulating (EST) equipment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... requirements for electrical stimulating (EST) equipment. (a) General. Electrical stimulating (EST) equipment is... of facilitating blood removal. These provisions do not apply to electrical equipment used to stun and... generate pulsed DC or AC voltage for stimulation and is separate from the equipment used to apply the...

9 CFR 307.7 - Safety requirements for electrical stimulating (EST) equipment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... requirements for electrical stimulating (EST) equipment. (a) General. Electrical stimulating (EST) equipment is... of facilitating blood removal. These provisions do not apply to electrical equipment used to stun and... generate pulsed DC or AC voltage for stimulation and is separate from the equipment used to apply the...

49 CFR 1242.43 - Administration (account XX-27-01).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Administration (account XX-27-01). 1242.43 Section...-Equipment § 1242.43 Administration (account XX-27-01). Separate common expenses according to freight/passenger separation of the following accounts: Passenger and Other Revenue Equipment (XX-27-45) Work and...

49 CFR 1242.49 - Equipment damaged (account XX-27-48).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Equipment damaged (account XX-27-48). 1242.49...-Equipment § 1242.49 Equipment damaged (account XX-27-48). Separate common expenses according to distribution... equipment and work and other non-revenue equipment accounts (accounts XX-27-40, XX-27-45, XX-27-46, and XX...

Frequency modulation system test procedure shuttle task 501 approach and landing test configuration

NASA Technical Reports Server (NTRS)

Doland, G. D.

1976-01-01

Shuttle Task 501 is an in-line task to test the performance and compatibility of radiofrequency links between the SSO and ground, and relay via a satellite. Under Shuttle Task 501 approach and landing test (ALT) phase only a limited portion of the communication and tracking (C&T) equipment is to be tested. The principal item to be tested is a frequency modulated (FM) data link. To test this RF link, an ALT FM System was designed, constructed, and the console wiring verified. A step-by-step procedure to be used to perform the ALT FM system is presented. The ALT FM system test is to be performed prior to delivery of the equipment to the Electronic Systems Test Laboratory (ESTL).

Analysis of Interactive Conflict Resolution Tool Usage in a Mixed Equipage Environment

NASA Technical Reports Server (NTRS)

Homola, Jeffrey; Morey, Susan; Cabrall, Christopher; Martin, Lynne; Mercer, Joey; Prevot, Thomas

2013-01-01

A human-in-the-loop simulation was conducted that examined separation assurance concepts in varying levels of traffic density with mixtures of aircraft equipage and automation. This paper's analysis focuses on one of the experimental conditions in which traffic levels were approximately fifty percent higher than today, and approximately fifty percent of the traffic within the test area were equipped with data communications (data comm) capabilities. The other fifty percent of the aircraft required control by voice much like today. Within this environment, the air traffic controller participants were provided access to tools and automation designed to support the primary task of separation assurance that are currently unavailable. Two tools were selected for analysis in this paper: 1) a pre-probed altitude fly-out menu that provided instant feedback of conflict probe results for a range of altitudes, and 2) an interactive auto resolver that provided on-demand access to an automation-generated conflict resolution trajectory. Although encouraged, use of the support tools was not required; the participants were free to use the tools as they saw fit, and they were also free to accept, reject, or modify the resolutions offered by the automation. This mode of interaction provided a unique opportunity to examine exactly when and how these tools were used, as well as how acceptable the resolutions were. Results showed that the participants used the pre-probed altitude fly-out menu in 14% of conflict cases and preferred to use it in a strategic timeframe on data comm equipped and level flight aircraft. The interactive auto resolver was also used in a primarily strategic timeframe on 22% of conflicts and that their preference was to use it on conflicts involving data comm equipped aircraft as well. Of the 258 resolutions displayed, 46% were implemented and 54% were not. The auto resolver was rated highly by participants in terms of confidence and preference. Factors such as aircraft equipage, ownership, and location of predicted separation loss appeared to play a role in the decision of controllers to accept or reject the auto resolver's resolutions.

Appliance of Inertial Gas-Dynamic Separation of Gas-Dispersion Flows in the Curvilinear Convergent-Divergent Channels for Compressor Equipment Reliability Improvement

NASA Astrophysics Data System (ADS)

Liaposhchenko, O. O.; Sklabinskyi, V. I.; Zavialov, V. L.; Pavlenko, I. V.; Nastenko, O. V.; Demianenko, M. M.

2017-08-01

The new methods of vibration and inertial gas-dynamic separation of gas-condensate and dusty flows and the corresponding separation devices are proposed in order to avoid emergencies and premature wear of parts and components of the compressor equipment. The formation of the gas flow and disperse particles in the curvilinear convergent-divergent channels are investigated. The optimizing hydrodynamic profiling of a geometrical configuration of curvilinear separation channels with rigid and flexible walls of baffles is carried out.

Pavements Maintenance and Construction Equipment Operator Career Ladders: United States Air Force Job Inventory. AFSCs 55130/31, 55150/51, 55170/71, and 55191.

ERIC Educational Resources Information Center

Air Force Personnel and Training Research Center, Lackland AFB, TX.

The U. S. Air Force job inventory for the pavements maintenance and construction equipment operator career ladders is divided into 26 categories, each of which is broken down into a duty-task list. Space is provided for Air Force personnel filling out the inventory to check whether each task is at present part of their duties. The 26 categories…

Workflow Dynamics and the Imaging Value Chain: Quantifying the Effect of Designating a Nonimage-Interpretive Task Workflow.

PubMed

Lee, Matthew H; Schemmel, Andrew J; Pooler, B Dustin; Hanley, Taylor; Kennedy, Tabassum A; Field, Aaron S; Wiegmann, Douglas; Yu, John-Paul J

To assess the impact of separate non-image interpretive task and image-interpretive task workflows in an academic neuroradiology practice. A prospective, randomized, observational investigation of a centralized academic neuroradiology reading room was performed. The primary reading room fellow was observed over a one-month period using a time-and-motion methodology, recording frequency and duration of tasks performed. Tasks were categorized into separate image interpretive and non-image interpretive workflows. Post-intervention observation of the primary fellow was repeated following the implementation of a consult assistant responsible for non-image interpretive tasks. Pre- and post-intervention data were compared. Following separation of image-interpretive and non-image interpretive workflows, time spent on image-interpretive tasks by the primary fellow increased from 53.8% to 73.2% while non-image interpretive tasks decreased from 20.4% to 4.4%. Mean time duration of image interpretation nearly doubled, from 05:44 to 11:01 (p = 0.002). Decreases in specific non-image interpretive tasks, including phone calls/paging (2.86/hr versus 0.80/hr), in-room consultations (1.36/hr versus 0.80/hr), and protocoling (0.99/hr versus 0.10/hr), were observed. The consult assistant experienced 29.4 task switching events per hour. Rates of specific non-image interpretive tasks for the CA were 6.41/hr for phone calls/paging, 3.60/hr for in-room consultations, and 3.83/hr for protocoling. Separating responsibilities into NIT and IIT workflows substantially increased image interpretation time and decreased TSEs for the primary fellow. Consolidation of NITs into a separate workflow may allow for more efficient task completion. Copyright © 2017 Elsevier Inc. All rights reserved.

Fitness and Recreation Career Ladder AFSC 741X1.

DTIC Science & Technology

1987-12-01

all first-termers who monitor equipment and weightlifters . Gymnasium Attendants are performing very few tasks (average of 27 tasks). Most of their...has a TD of 4.84 (below the average of 5). But this task, if not accomplished properly, could lead to injury . Therefore, TE was high on this task. A

33 CFR 155.400 - Platform machinery space drainage on oceangoing fixed and floating drilling rigs and other...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Complies with the oily-water separating equipment requirements of a valid National Pollutant Discharge... Chapter I; (2) Complies with the oily-water separating equipment requirements for oceangoing ships of 400... installed bilge pumping system for discharge of oily mixtures from platform machinery spaces into the sea...

33 CFR 155.400 - Platform machinery space drainage on oceangoing fixed and floating drilling rigs and other...

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Complies with the oily-water separating equipment requirements of a valid National Pollutant Discharge... Chapter I; (2) Complies with the oily-water separating equipment requirements for oceangoing ships of 400... installed bilge pumping system for discharge of oily mixtures from platform machinery spaces into the sea...

33 CFR 155.400 - Platform machinery space drainage on oceangoing fixed and floating drilling rigs and other...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Complies with the oily-water separating equipment requirements of a valid National Pollutant Discharge... Chapter I; (2) Complies with the oily-water separating equipment requirements for oceangoing ships of 400... installed bilge pumping system for discharge of oily mixtures from platform machinery spaces into the sea...

33 CFR 155.400 - Platform machinery space drainage on oceangoing fixed and floating drilling rigs and other...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Complies with the oily-water separating equipment requirements of a valid National Pollutant Discharge... Chapter I; (2) Complies with the oily-water separating equipment requirements for oceangoing ships of 400... installed bilge pumping system for discharge of oily mixtures from platform machinery spaces into the sea...

Wireless "Jump" Starts for Partly Disabled Equipment

NASA Technical Reports Server (NTRS)

Castle, K. D.

1986-01-01

Equipment activated when normal remote starting does not work Beam from nearby station first carries raw energy and then subsystemactivating signals to equipment crippled by discharged storage batteries. Operators start up equipment without approaching it under hazardous conditions. Potential terrestrial applications for scheme include starting of robots on such remotely-controlled hazardous tasks as handling of explosives or retrieval or deposition of objects in hostile environments.

49 CFR 396.25 - Qualifications of brake inspectors.

Code of Federal Regulations, 2011 CFR

2011-10-01

... methods, procedures, tools and equipment used when performing an assigned brake service or inspection task... motor carrier or intermodal equipment provider at its principal place of business, or at the location at...

49 CFR 396.25 - Qualifications of brake inspectors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... methods, procedures, tools and equipment used when performing an assigned brake service or inspection task... motor carrier or intermodal equipment provider at its principal place of business, or at the location at...

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Professional Nurse (Associate Degree). Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This document contains a task analysis for health occupations (professional nurse) in the nursing cluster. For each task listed, occupation, duty area, performance standard, steps, knowledge, attitudes, safety, equipment/supplies, source of analysis, and Illinois state goals for learning are listed. For the duty area of "providing therapeutic…

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Home Health Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This document contains a task analysis for health occupations (home health aid) in the nursing cluster. For each task listed, occupation, duty area, performance standard, steps, knowledge, attitudes, safety, equipment/supplies, source of analysis, and Illinois state goals for learning are listed. For the duty area of "providing therapeutic…

Ethnic and Sex Differences in Ownership of Preventive Health Equipment among Rural Older Adults with Diabetes

ERIC Educational Resources Information Center

Bell, Ronny A.; Arcury, Thomas A.; Stafford, Jeanette M.; Golden, Shannon L.; Snively, Beverly M.; Quandt, Sara A.

2007-01-01

Context: Diabetes self-management is important for achieving successful health outcomes. Different levels of self-management have been reported among various populations, though little is known about ownership of equipment that can enhance accomplishment of these tasks. Purpose: This study examined diabetes self-management equipment ownership…

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2012 CFR

2012-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2012-10-01 2012-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2013 CFR

2013-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2013-10-01 2013-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2011 CFR

2011-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2011-10-01 2011-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2014 CFR

2014-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2014-10-01 2014-10-01 false Computers and data processing equipment (account...

49 CFR 1242.46 - Computers and data processing equipment (account XX-27-46).

Code of Federal Regulations, 2010 CFR

2010-10-01

... REPORTS SEPARATION OF COMMON OPERATING EXPENSES BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Equipment § 1242.46 Computers and data processing equipment (account XX-27-46... 49 Transportation 9 2010-10-01 2010-10-01 false Computers and data processing equipment (account...

30 CFR 77.902-3 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2012 CFR

2012-07-01

... SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Low- and Medium-Voltage Alternating Current Circuits § 77.902-3 Attachment of ground conductors and ground check wires to... equipment receiving power from resistance grounded systems, separate connections shall be used. ...

30 CFR 77.902-3 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2014 CFR

2014-07-01

... SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Low- and Medium-Voltage Alternating Current Circuits § 77.902-3 Attachment of ground conductors and ground check wires to... equipment receiving power from resistance grounded systems, separate connections shall be used. ...

30 CFR 77.902-3 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2013 CFR

2013-07-01

... SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Low- and Medium-Voltage Alternating Current Circuits § 77.902-3 Attachment of ground conductors and ground check wires to... equipment receiving power from resistance grounded systems, separate connections shall be used. ...

Conflict Resolution Automation and Pilot Situation Awareness

NASA Technical Reports Server (NTRS)

Dao, Arik-Quang V.; Brandt, Summer L.; Bacon, Paige; Kraut, Josh; Nguyen, Jimmy; Minakata, Katsumi; Raza, Hamzah; Rozovski, David; Johnson, Walter W.

2010-01-01

This study compared pilot situation awareness across three traffic management concepts. The Concepts varied in terms of the allocation of traffic avoidance responsibility between the pilot on the flight deck, the air traffic controllers, and a conflict resolution automation system. In Concept 1, the flight deck was equipped with conflict resolution tools that enable them to fully handle the responsibility of weather avoidance and maintaining separation between ownship and surrounding traffic. In Concept 2, pilots were not responsible for traffic separation, but were provided tools for weather and traffic avoidance. In Concept 3, flight deck tools allowed pilots to deviate for weather, but conflict detection tools were disabled. In this concept pilots were dependent on ground based automation for conflict detection and resolution. Situation awareness of the pilots was measured using online probes. Results showed that individual situation awareness was highest in Concept 1, where the pilots were most engaged, and lowest in Concept 3, where automation was heavily used. These findings suggest that for conflict resolution tasks, situation awareness is improved when pilots remain in the decision-making loop.

Operational experience and design recommendations for teleoperated flight hardware

NASA Technical Reports Server (NTRS)

Burgess, T. W.; Kuban, D. P.; Hankins, W. W.; Mixon, R. W.

1988-01-01

Teleoperation (remote manipulation) will someday supplement/minimize astronaut extravehicular activity in space to perform such tasks as satellite servicing and repair, and space station construction and servicing. This technology is being investigated by NASA with teleoperation of two space-related tasks having been demonstrated at the Oak Ridge National Lab. The teleoperator experiments are discussed and the results of these experiments are summarized. The related equipment design recommendations are also presented. In addition, a general discussion of equipment design for teleoperation is also presented.

Relocation of the Deep Space Network Maintenance Center

NASA Technical Reports Server (NTRS)

Beutler, K. F.

1981-01-01

The Jet Propulsion Laboratory maintains a Deep Space Network (DSN) maintenance center (DMC), whose task is to engineer and manage the repair and calibration program for the electronic and mechanical equipment used in the tracking stations located at Madrid, Spain, and Canberra, Australia. The DMC also manages the Goldstone complex maintenance facility (GCMF), whose task is to repair and calibrate the Goldstone electronic and mechanical equipment. The rationale for moving the facility to Barstow, California, and the benefits derived from the move are discussed.

Hierarchical learning induces two simultaneous, but separable, prediction errors in human basal ganglia.

PubMed

Diuk, Carlos; Tsai, Karin; Wallis, Jonathan; Botvinick, Matthew; Niv, Yael

2013-03-27

Studies suggest that dopaminergic neurons report a unitary, global reward prediction error signal. However, learning in complex real-life tasks, in particular tasks that show hierarchical structure, requires multiple prediction errors that may coincide in time. We used functional neuroimaging to measure prediction error signals in humans performing such a hierarchical task involving simultaneous, uncorrelated prediction errors. Analysis of signals in a priori anatomical regions of interest in the ventral striatum and the ventral tegmental area indeed evidenced two simultaneous, but separable, prediction error signals corresponding to the two levels of hierarchy in the task. This result suggests that suitably designed tasks may reveal a more intricate pattern of firing in dopaminergic neurons. Moreover, the need for downstream separation of these signals implies possible limitations on the number of different task levels that we can learn about simultaneously.

Task-space separation principle: a force-field approach to motion planning for redundant manipulators.

PubMed

Tommasino, Paolo; Campolo, Domenico

2017-02-03

In this work, we address human-like motor planning in redundant manipulators. Specifically, we want to capture postural synergies such as Donders' law, experimentally observed in humans during kinematically redundant tasks, and infer a minimal set of parameters to implement similar postural synergies in a kinematic model. For the model itself, although the focus of this paper is to solve redundancy by implementing postural strategies derived from experimental data, we also want to ensure that such postural control strategies do not interfere with other possible forms of motion control (in the task-space), i.e. solving the posture/movement problem. The redundancy problem is framed as a constrained optimization problem, traditionally solved via the method of Lagrange multipliers. The posture/movement problem can be tackled via the separation principle which, derived from experimental evidence, posits that the brain processes static torques (i.e. posture-dependent, such as gravitational torques) separately from dynamic torques (i.e. velocity-dependent). The separation principle has traditionally been applied at a joint torque level. Our main contribution is to apply the separation principle to Lagrange multipliers, which act as task-space force fields, leading to a task-space separation principle. In this way, we can separate postural control (implementing Donders' law) from various types of tasks-space movement planners. As an example, the proposed framework is applied to the (redundant) task of pointing with the human wrist. Nonlinear inverse optimization (NIO) is used to fit the model parameters and to capture motor strategies displayed by six human subjects during pointing tasks. The novelty of our NIO approach is that (i) the fitted motor strategy, rather than raw data, is used to filter and down-sample human behaviours; (ii) our framework is used to efficiently simulate model behaviour iteratively, until it converges towards the experimental human strategies.

Teaching Separations: Why, What, When, and How?

ERIC Educational Resources Information Center

Wankat, Phillip C.

2001-01-01

Describes how and when to teach separation science to chemical engineering students. Separation science is important for industrial businesses involving the manufacture of adsorption systems, distillation columns, extractors, and other separation equipment and techniques. (Contains 13 references.) (YDS)

Task management skills and their deficiencies during care delivery in simulated medical emergency situation: A classification.

PubMed

Morineau, Thierry; Chapelain, Pascal; Quinio, Philippe

2016-06-01

Our objective was to develop the analysis of task management skills by proposing a framework classifying task management stages and deficiencies. Few studies of non-technical skills have detailed the components of task management skills through behavioural markers, despite their central role in care delivery. A post hoc qualitative behavioural analysis was performed of recordings made of professional training sessions based upon simulated scenarios. Four recorded sessions in a high-fidelity simulation setting were observed and recorded. Two scenarios were used (cardiac arrest and respiratory failure), and there were two training sessions per scenario. Four types of task management deficiencies were identified with regards to task constraints: constraint relaxation, unsatisfied constraints, additional constraints and constraint transgression. Both equipment and space constraints were also identified. The lack of prerequisite actions when preparing the environment, corequisite actions for equipment and protocol monitoring, or postrequisite actions to restore the environment were associated with task management deficiencies. Deficiencies in task management behaviours can be identified in simulated as well as actual medical emergency settings. This framework opens perspectives for both training caregivers and designing ergonomic work situations. Copyright © 2015 Elsevier Ltd. All rights reserved.

Trade and Industrial Education. Course of Study for Mine Equipment Maintenance.

ERIC Educational Resources Information Center

Simms, James C., Comp.; Tweed, Stephen C., Comp.

Intended as a teaching and learning guide for use with high school students who are interested in the occupation of mine equipment repairman, this beginning course is designed to give students the opportunity to develop the necessary skills required to perform the tasks of a mine equipment repairman; acquire the related information necessary to…

30 CFR 77.902-3 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Attachment of ground conductors and ground check wires to equipment frames; use of separate connections. 77.902-3 Section 77.902-3 Mineral...-Voltage Alternating Current Circuits § 77.902-3 Attachment of ground conductors and ground check wires to...

30 CFR 77.902-3 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Attachment of ground conductors and ground check wires to equipment frames; use of separate connections. 77.902-3 Section 77.902-3 Mineral...-Voltage Alternating Current Circuits § 77.902-3 Attachment of ground conductors and ground check wires to...

An Experimental Investigation of Dextrous Robots Using EVA Tools and Interfaces

NASA Technical Reports Server (NTRS)

Ambrose, Robert; Culbert, Christopher; Rehnmark, Frederik

2001-01-01

This investigation of robot capabilities with extravehicular activity (EVA) equipment looks at how improvements in dexterity are enabling robots to perform tasks once thought to be beyond machines. The approach is qualitative, using the Robonaut system at the Johnson Space Center (JSC), performing task trials that offer a quick look at this system's high degree of dexterity and the demands of EVA. Specific EVA tools attempted include tether hooks, power torque tools, and rock scoops, as well as conventional tools like scissors, wire strippers, forceps, and wrenches. More complex EVA equipment was also studied, with more complete tasks that mix tools, EVA hand rails, tethers, tools boxes, PIP pins, and EVA electrical connectors. These task trials have been ongoing over an 18 month period, as the Robonaut system evolved to its current 43 degree of freedom (DOF) configuration, soon to expand to over 50. In each case, the number of teleoperators is reported, with rough numbers of attempts and their experience level, with a subjective difficulty rating assigned to each piece of EVA equipment and function. JSC' s Robonaut system was successful with all attempted EVA hardware, suggesting new options for human and robot teams working together in space.

Satellite services system analysis study. Volume 4: Service equipment concepts

NASA Technical Reports Server (NTRS)

1981-01-01

Payload deployment equipment is discussed, including payload separation, retention structures, the remote manipulator system, tilt tables, the payload installation and deployment aid, the handling and positioning aid, and spin tables. Close proximity retrieval, and on-orbit servicing equipment is discussed. Backup and contingency equipment is also discussed. Delivery and retrieval of high-energy payloads are considered. Earth return equipment, the aft flight deck, optional, and advanced equipment are also discussed.

Hierarchical Learning Induces Two Simultaneous, But Separable, Prediction Errors in Human Basal Ganglia

PubMed Central

Tsai, Karin; Wallis, Jonathan; Botvinick, Matthew

2013-01-01

Studies suggest that dopaminergic neurons report a unitary, global reward prediction error signal. However, learning in complex real-life tasks, in particular tasks that show hierarchical structure, requires multiple prediction errors that may coincide in time. We used functional neuroimaging to measure prediction error signals in humans performing such a hierarchical task involving simultaneous, uncorrelated prediction errors. Analysis of signals in a priori anatomical regions of interest in the ventral striatum and the ventral tegmental area indeed evidenced two simultaneous, but separable, prediction error signals corresponding to the two levels of hierarchy in the task. This result suggests that suitably designed tasks may reveal a more intricate pattern of firing in dopaminergic neurons. Moreover, the need for downstream separation of these signals implies possible limitations on the number of different task levels that we can learn about simultaneously. PMID:23536092

High sensitivity to multisensory conflicts in agoraphobia exhibited by virtual reality.

PubMed

Viaud-Delmon, Isabelle; Warusfel, Olivier; Seguelas, Angeline; Rio, Emmanuel; Jouvent, Roland

2006-10-01

The primary aim of this study was to evaluate the effect of auditory feedback in a VR system planned for clinical use and to address the different factors that should be taken into account in building a bimodal virtual environment (VE). We conducted an experiment in which we assessed spatial performances in agoraphobic patients and normal subjects comparing two kinds of VEs, visual alone (Vis) and auditory-visual (AVis), during separate sessions. Subjects were equipped with a head-mounted display coupled with an electromagnetic sensor system and immersed in a virtual town. Their task was to locate different landmarks and become familiar with the town. In the AVis condition subjects were equipped with the head-mounted display and headphones, which delivered a soundscape updated in real-time according to their movement in the virtual town. While general performances remained comparable across the conditions, the reported feeling of immersion was more compelling in the AVis environment. However, patients exhibited more cybersickness symptoms in this condition. The result of this study points to the multisensory integration deficit of agoraphobic patients and underline the need for further research on multimodal VR systems for clinical use.

Sample selection and testing of separation processes

NASA Technical Reports Server (NTRS)

Karr, L. J.

1985-01-01

Phase partitioning, which has become an important tool for the separation and purification of biological materials, was studied. Instruments available for this technique were researched and a countercurrent distribution apparatus, the Biosheff MK2N, was purchased. Various proteins, polysaccharides and cells were studied as models to determine operating procedures and conditions for this piece of equipment. Results were compared with those obtained from other similar equipment, including a nonsynchronous coil planet centrifuge device. Additionally, work was done with affinity ligands attached to PEG, which can further enhance the separation capabilities of phase partitioning.

Using Task Clarification, Checklists and Performance Feedback To Improve the Appearance of a Grocery Store.

ERIC Educational Resources Information Center

Shier, Leslie; Rae, Christen; Austin, John

2003-01-01

An intervention package of task clarification, checklists, and posted performance feedback was developed to increase completion of tasks contributing to the appearance of a local grocery store. The package was based on an informal diagnostic assessment that examined antecedents, equipment and processes, knowledge and skills, and consequences in…

Gender Effects When Learning Manipulative Tasks from Instructional Animations and Static Presentations

ERIC Educational Resources Information Center

Wong, Mona; Castro-Alonso, Juan C.; Ayres, Paul; Paas, Fred

2015-01-01

Humans have an evolved embodied cognition that equips them to deal easily with the natural movements of object manipulations. Hence, learning a manipulative task is generally more effective when watching animations that show natural motions of the task, rather than equivalent static pictures. The present study was completed to explore this…

Convergence, Competition, Cooperation: The Report of the Governor's Blue Ribbon Telecommunications Infrastructure Task Force. Volume One.

ERIC Educational Resources Information Center

Wisconsin Governor's Office, Madison.

This report by the Blue Ribbon Task Force on Wisconsin's Telecommunications Infrastructure considers infrastructure to be the common network that connects individual residences, businesses, and agencies, rather than the individual systems and equipment themselves. The task force recognizes that advances in telecommunications technologies and…

Two-Point Orientation Discrimination Versus the Traditional Two-Point Test for Tactile Spatial Acuity Assessment

PubMed Central

Tong, Jonathan; Mao, Oliver; Goldreich, Daniel

2013-01-01

Two-point discrimination is widely used to measure tactile spatial acuity. The validity of the two-point threshold as a spatial acuity measure rests on the assumption that two points can be distinguished from one only when the two points are sufficiently separated to evoke spatially distinguishable foci of neural activity. However, some previous research has challenged this view, suggesting instead that two-point task performance benefits from an unintended non-spatial cue, allowing spuriously good performance at small tip separations. We compared the traditional two-point task to an equally convenient alternative task in which participants attempt to discern the orientation (vertical or horizontal) of two points of contact. We used precision digital readout calipers to administer two-interval forced-choice versions of both tasks to 24 neurologically healthy adults, on the fingertip, finger base, palm, and forearm. We used Bayesian adaptive testing to estimate the participants’ psychometric functions on the two tasks. Traditional two-point performance remained significantly above chance levels even at zero point separation. In contrast, two-point orientation discrimination approached chance as point separation approached zero, as expected for a valid measure of tactile spatial acuity. Traditional two-point performance was so inflated at small point separations that 75%-correct thresholds could be determined on all tested sites for fewer than half of participants. The 95%-correct thresholds on the two tasks were similar, and correlated with receptive field spacing. In keeping with previous critiques, we conclude that the traditional two-point task provides an unintended non-spatial cue, resulting in spuriously good performance at small spatial separations. Unlike two-point discrimination, two-point orientation discrimination rigorously measures tactile spatial acuity. We recommend the use of two-point orientation discrimination for neurological assessment. PMID:24062677

Supplies and equipment for pediatric emergency mass critical care

PubMed Central

Bohn, Desmond; Kanter, Robert K.; Burns, Jeffrey; Barfield, Wanda D.; Kissoon, Niranjan

2015-01-01

Introduction Epidemics of acute respiratory disease, such as severe acute respiratory syndrome in 2003, and natural disasters, such as Hurricane Katrina in 2005, have prompted planning in hospitals that offer adult critical care to increase their capacity and equipment inventory for responding to a major demand surge. However, planning at a national, state, or local level to address the particular medical resource needs of children for mass critical care has yet to occur in any coordinated way. This paper presents the consensus opinion of the Task Force regarding supplies and equipment that would be required during a pediatric mass critical care crisis. Methods In May 2008, the Task Force for Mass Critical Care published guidance on provision of mass critical care to adults. Acknowledging that the critical care needs of children during disasters were unaddressed by this effort, a 17-member Steering Committee, assembled by the Oak Ridge Institute for Science and Education with guidance from members of the American Academy of Pediatrics, convened in April 2009 to determine priority topic areas for pediatric emergency mass critical care recommendations. Steering Committee members established subcommittees by topic area and performed literature reviews of MEDLINE and Ovid databases. The Steering Committee produced draft outlines through consensus-based study of the literature and convened October 6 –7, 2009, in New York, NY, to review and revise each outline. Eight draft documents were subsequently developed from the revised outlines as well as through searches of MEDLINE updated through March 2010. The Pediatric Emergency Mass Critical Care Task Force, composed of 36 experts from diverse public health, medical, and disaster response fields, convened in Atlanta, GA, on March 29 –30, 2010. Feedback on each manuscript was compiled and the Steering Committee revised each document to reflect expert input in addition to the most current medical literature. Task Force Recommendations The Task Force endorsed the view that supplies and equipment must be available for a tripling of capacity above the usual peak pediatric intensive care unit capacity for at least 10 days. The recommended size-specific pediatric mass critical care equipment stockpile for two types of patients is presented in terms of equipment needs per ten mass critical care beds, which would serve 26 patients over a 10-day period. Specific recommendations are made regarding ventilator capacity, including the potential use of high-frequency oscillatory ventilation and extracorporeal membrane oxygenation. Other recommendations include inventories for disposable medical equipment, medications, and staffing levels. PMID:22067920

Analysis of measurement system as the mechatronics system

NASA Astrophysics Data System (ADS)

Giniotis, V.; Grattan, K. T. V.; Rybokas, M.; Bručas, D.

2010-07-01

The paper deals with the mechatronic arrangement for angle measuring system application. The objects to be measured are the circular raster scales, rotary encoders and coded scales. The task of the measuring system is to determine the bias of angle measuring standard as the circular scale and to use the results for the error correction and accuracy improvement of metal cutting machines, coordinate measuring machines, robots, etc. The technical solutions are given with the application of active materials for smart piezoactuators implemented into the several positions of angular measuring equipment. Mechatronic measuring system is analysed as complex integrated system and some of its elements can be used as separate units. All these functional elements are described and commented in the paper with the diagrams and graphs of errors and examples of microdisplacement devices using the mechatronic elements.

Use of a Prototype Airborne Separation Assurance System for Resolving Near-Term Conflicts During Autonomous Aircraft Operations

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Eischeid, Todd M.; Palmer, Michael T.; Wing, David J.

2003-01-01

NASA is currently investigating a new concept of operations for the National Airspace System, designed to improve capacity while maintaining or improving current levels of safety. This concept, known as Distributed Air/Ground Traffic Management (DAGTM), allows appropriately equipped autonomous aircraft to maneuver freely for flight optimization while resolving conflicts with other traffic and staying out of special use airspace and hazardous weather. In order to perform these tasks, pilots use prototype conflict detection, prevention, and resolution tools, collectively known as an Airborne Separation Assurance System (ASAS). While ASAS would normally allow pilots to resolve conflicts before they become hazardous, evaluation of system performance in sudden, near-term conflicts is needed in order to determine concept feasibility. An experiment was conducted in NASA Langley's Air Traffic Operations Lab to evaluate the prototype ASAS for enabling pilots to resolve near-term conflicts and examine possible operational effects associated with the use of lower separation minimums. Sixteen commercial airline pilots flew a total of 32 traffic scenarios that required them to use prototype ASAS tools to resolve close range pop-up conflicts. Required separation standards were set at either 3 or 5 NM lateral spacing, with 1000 ft vertical separation being used for both cases. Reducing the lateral separation from 5 to 3 NM did not appear to increase operational risk, as indicated by the proximity to the intruder aircraft. Pilots performed better when they followed tactical guidance cues provided by ASAS than when they didn't follow the guidance. In an effort to improve compliance rate, ASAS design changes are currently under consideration. Further studies will of evaluate these design changes and consider integration issues between ASAS and existing Airborne Collision Avoidance Systems (ACAS).

A Performance Assessment of a Tactical Airborne Separation Assistance System using Realistic, Complex Traffic Flows

NASA Technical Reports Server (NTRS)

Smith, Jeremy C.; Neitzke, Kurt W.; Bussink, Frank J. L.

2008-01-01

This paper presents the results from a study that investigates the performance of aspects of an Airborne Separation Assistance System (ASAS) under varying demand levels using realistic traffic patterns. This study only addresses the tactical aspects of an ASAS using aircraft state data (latitude, longitude, altitude, heading and speed) to detect and resolve projected conflicts. The main focus of this paper is to determine the extent to which sole reliance on the proposed tactical ASAS can maintain aircraft separation at demand levels up to three times current traffic. The effect of mixing ASAS equipped aircraft with non-equipped aircraft that do not have the capability to self-separate is also investigated.

Mechanical recycling of waste electric and electronic equipment: a review.

PubMed

Cui, Jirang; Forssberg, Eric

2003-05-30

The production of electric and electronic equipment (EEE) is one of the fastest growing areas. This development has resulted in an increase of waste electric and electronic equipment (WEEE). In view of the environmental problems involved in the management of WEEE, many counties and organizations have drafted national legislation to improve the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal. Recycling of WEEE is an important subject not only from the point of waste treatment but also from the recovery of valuable materials.WEEE is diverse and complex, in terms of materials and components makeup as well as the original equipment's manufacturing processes. Characterization of this waste stream is of paramount importance for developing a cost-effective and environmentally friendly recycling system. In this paper, the physical and particle properties of WEEE are presented. Selective disassembly, targeting on singling out hazardous and/or valuable components, is an indispensable process in the practice of recycling of WEEE. Disassembly process planning and innovation of disassembly facilities are most active research areas. Mechanical/physical processing, based on the characterization of WEEE, provides an alternative means of recovering valuable materials. Mechanical processes, such as screening, shape separation, magnetic separation, Eddy current separation, electrostatic separation, and jigging have been widely utilized in recycling industry. However, recycling of WEEE is only beginning. For maximum separation of materials, WEEE should be shredded to small, even fine particles, generally below 5 or 10mm. Therefore, a discussion of mechanical separation processes for fine particles is highlighted in this paper. Consumer electronic equipment (brown goods), such as television sets, video recorders, are most common. It is very costly to perform manual dismantling of those products, due to the fact that brown goods contain very low-grade precious metals and copper. It is expected that a mechanical recycling process will be developed for the upgrading of low metal content scraps.

77 FR 8326 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-14

... 2010, FRA formed an Engineering Task Force (ETF) to develop crashworthiness criteria for an... system with other compliant Tier 1 equipments. The waiver petition includes documentation on the... Integrity Colliding Equipment Override Fluid Entry Inhibition End Structure Integrity of Cab End End...

Development and Validation of a Computer Interactive Test Battery.

ERIC Educational Resources Information Center

Sheppard, Valarie A.; Baker, Todd A.; Gebhardt, Deborah L.; Leonard, Kristine M.

The purpose of this project was to develop valid evaluation procedures for the selection of Container Equipment Operators (CEOs) in the shipping industry. A job analysis was conducted to identify the essential tasks of the CEO job. Site visits, a task inventory, and the determination of essential tasks were used in the job analysis. The skills and…

Life sciences payload definition and integration study, task C and D. Volume 4: Preliminary equipment item specification catalog

NASA Technical Reports Server (NTRS)

1973-01-01

A specification catalog to define the equipment to be used for conducting life sciences experiments in a space laboratory is presented. The specification sheets list the purpose of the equipment item, and any specific technical requirements which can be identified. The status of similar hardware for ground use is stated with comments regarding modifications required to achieve spaceflight qualified hardware. Pertinent sketches, commercial catalog sheets, or drawings of the applicable equipment are included.

Overview of Remote Handling Equipment Used for the NPP A1 Decommissioning - 12141

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kravarik, K.; Medved, J.; Pekar, A.

The first Czechoslovak NPP A1 was in operation from 1972 to 1977 and it was finally shutdown due to an accident (level 4 according to the INES). The presence of radioactive, toxic or hazardous materials limits personnel access to facilities and therefore it is necessary to use remote handling technologies for some most difficult characterization, retrieval, decontamination and dismantling tasks. The history of remote handling technologies utilization started in nineties when the spent nuclear fuel, including those fuel assemblies damaged during the accident, was prepared for the transport to Russia. Subsequent significant development of remote handling equipment continued during implementationmore » of the NPP A1 decommissioning project - Stage I and ongoing Stage II. Company VUJE, Inc. is the general contractor for both mentioned stages of the decommissioning project. Various remote handling manipulators and robotics arms were developed and used. It includes remotely controlled vehicle manipulator MT-15 used for characterisation tasks in hostile and radioactive environment, special robust manipulator DENAR-41 used for the decontamination of underground storage tanks and multi-purposes robotics arms MT-80 and MT-80A developed for variety of decontamination and dismantling tasks. The heavy water evaporator facility dismantling is the current task performed remotely by robotics arm MT-80. The heavy water evaporator is located inside the main production building in the room No. 220 where loose surface contamination varies from 10 Bq/cm{sup 2} to 1x10{sup 3} Bq/cm{sup 2}, dose rate is up to 1.5 mGy/h and the feeding pipeline contained liquid RAW with high tritium content. Presented manipulators have been designed for broad range of decommissioning tasks. They are used for recognition, sampling, waste retrieval from large underground tanks, decontamination and dismantling of technological equipments. Each of the mentioned fields claims specific requirements on design of manipulator, their operation and control systems as well as tools of manipulators. Precise planning of decontamination and dismantling tasks is necessary for its successful performance by remotely controlled manipulator. The example of the heavy water evaporator demonstrates typical procedure for decommissioning of contaminated technological equipment by remotely controlled manipulators - planning of decommissioning tasks, preparatory tasks, modification of applied tools and design of specific supporting constructions for manipulator and finally decontamination and dismantling themselves. Due to the particularly demanding conditions in highly contaminated A1 NPP, a team of experts with special know-how in the field of decommissioning has grown up, and unique technological equipment enabling effective and safe work in environment with a high radiation level has been developed. (authors)« less

Cost effective modular unit for cleaning oil and gas field waste water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zinberg, M.B.; Nenasheva, M.N.; Gafarov, N.A.

1996-12-31

Problems of environmental control involving conservation of water resources are vital for the development of giant oil and gas condensate fields near Caspian Sea (Russia) characterized by water shortages. One of the urgent tasks of oil production industry is to use all field waste water consisting of underground, processing and rain water. It was necessary to construct a new highly effective equipment which could be used in local waste water treatment. Now we have at our disposal a technology and equipment to meet the requirements to the treated water quality. Thus we have installed a modular unit of 100 m{supmore » 3}/a day capacity to clean waste water from oil products, suspended matter and other organic pollutants at Orenburg oil and gas condensate field, Russia. The unit provides with a full treatment of produced water and comprises a settling tank with adhesive facility, the number of sorption filters, Trofactor bioreactors and a disinfecting facility. The equipment is fitted into three boxes measuring 9 x 3.2 x 2.7 in each. The equipment is simple in design that enables to save money, time and space. Sorption filters, bioreactors as well as the Trofactor process are a part of know-how. While working on the unit construction we applied well known methods of settling and sorption. The process of mechanic cleaning is undergoing in the following succession: (1) the gravitational separation in a settling tank where the floated film oil products are constantly gathered and the sediment is periodically taken away, (2) the settled water treatment in sorption Filters of a special kind.« less

Verbal and nonverbal behavior of ability-grouped dyads

NASA Astrophysics Data System (ADS)

Jones, M. Gail; Carter, Glenda

In this study we describe the social interactions of ability-grouped dyads as they constructed knowledge of balance concepts to elucidate the relationship between interactions and conceptual growth. The verbal and nonverbal behaviors of 30 fifth-grade students were recorded as they completed three activities related to balance. These student interactions were examined within a framework of social cognition. For each dyad, characteristics of ability-grouped dyads were identified. Results revealed that high-achieving students effectively used prior experiences, maintained focus on the learning task, and were able to manipulate the equipment effectively to construct knowledge. Low-achieving students exhibited off-task behavior, lacked a metacognitive framework for organizing the learning tasks, centered on irrelevant features of the equipment, and were unable to use language effectively to mediate learning. Within low-high student dyads, high-achieving students typically modeled thinking processes and strategies for manipulating equipment. In addition, they focused the low-achieving students on the components of the tasks while verbally monitoring their progress, thus enabling low students to identify the critical features necessary for concept construction. These results highlighted the differences that students have in the use of language and tools. Low students' inefficient use of tools has implications for the ways science teachers structure lessons and group students for laboratory work.Received: 8 March 1993; Revised: 6 January 1994;

Flexible distributed architecture for semiconductor process control and experimentation

NASA Astrophysics Data System (ADS)

Gower, Aaron E.; Boning, Duane S.; McIlrath, Michael B.

1997-01-01

Semiconductor fabrication requires an increasingly expensive and integrated set of tightly controlled processes, driving the need for a fabrication facility with fully computerized, networked processing equipment. We describe an integrated, open system architecture enabling distributed experimentation and process control for plasma etching. The system was developed at MIT's Microsystems Technology Laboratories and employs in-situ CCD interferometry based analysis in the sensor-feedback control of an Applied Materials Precision 5000 Plasma Etcher (AME5000). Our system supports accelerated, advanced research involving feedback control algorithms, and includes a distributed interface that utilizes the internet to make these fabrication capabilities available to remote users. The system architecture is both distributed and modular: specific implementation of any one task does not restrict the implementation of another. The low level architectural components include a host controller that communicates with the AME5000 equipment via SECS-II, and a host controller for the acquisition and analysis of the CCD sensor images. A cell controller (CC) manages communications between these equipment and sensor controllers. The CC is also responsible for process control decisions; algorithmic controllers may be integrated locally or via remote communications. Finally, a system server images connections from internet/intranet (web) based clients and uses a direct link with the CC to access the system. Each component communicates via a predefined set of TCP/IP socket based messages. This flexible architecture makes integration easier and more robust, and enables separate software components to run on the same or different computers independent of hardware or software platform.

Measurement of Productive Capacity: A Methodology for Air Force Enlisted Specialties

DTIC Science & Technology

1992-06-01

measurement across a wide variety of duties (11 for Aircrew Life Support (122X0), 8 for Personnel (732X0), 26 for Aerospace Ground Equipment ( 454X1 ), and 16...50 Tasks 454X1 - 55 Tasks 455X2 - 41 Tasks 732X0 - 38 Tasks The tasks in three of the four AFSs tended to represent certain duty areas more than...others, probably because these duty areas contained the functions most frequently performed by first-term airmen. For AFS 454X1 the tasks represented

30 CFR 75.703-3 - Approved methods of grounding offtrack mobile, portable and stationary direct-current machines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... separate grounding conductor located within the trailing cable of mobile and portable equipment and... conductor located within the direct-current power cable feeding stationary equipment and connected between... ground conductor connected between stationary equipment and the direct-current grounding medium; or, (d...

30 CFR 75.703-3 - Approved methods of grounding offtrack mobile, portable and stationary direct-current machines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... separate grounding conductor located within the trailing cable of mobile and portable equipment and... conductor located within the direct-current power cable feeding stationary equipment and connected between... ground conductor connected between stationary equipment and the direct-current grounding medium; or, (d...

30 CFR 75.703-3 - Approved methods of grounding offtrack mobile, portable and stationary direct-current machines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... separate grounding conductor located within the trailing cable of mobile and portable equipment and... conductor located within the direct-current power cable feeding stationary equipment and connected between... ground conductor connected between stationary equipment and the direct-current grounding medium; or, (d...

30 CFR 75.703-3 - Approved methods of grounding offtrack mobile, portable and stationary direct-current machines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... separate grounding conductor located within the trailing cable of mobile and portable equipment and... conductor located within the direct-current power cable feeding stationary equipment and connected between... ground conductor connected between stationary equipment and the direct-current grounding medium; or, (d...

30 CFR 75.703-3 - Approved methods of grounding offtrack mobile, portable and stationary direct-current machines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... separate grounding conductor located within the trailing cable of mobile and portable equipment and... conductor located within the direct-current power cable feeding stationary equipment and connected between... ground conductor connected between stationary equipment and the direct-current grounding medium; or, (d...

46 CFR 168.15-20 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Equipment. 168.15-20 Section 168.15-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS CIVILIAN NAUTICAL SCHOOL VESSELS Accommodations § 168.15-20 Equipment. (a) Each person shall have a separate berth and not more than 1 berth may...

An Internal Data Non-hiding Type Real-time Kernel and its Application to the Mechatronics Controller

NASA Astrophysics Data System (ADS)

Yoshida, Toshio

For the mechatronics equipment controller that controls robots and machine tools, high-speed motion control processing is essential. The software system of the controller like other embedded systems is composed of three layers software such as real-time kernel layer, middleware layer, and application software layer on the dedicated hardware. The application layer in the top layer is composed of many numbers of tasks, and application function of the system is realized by the cooperation between these tasks. In this paper we propose an internal data non-hiding type real-time kernel in which customizing the task control is possible only by change in the program code of the task side without any changes in the program code of real-time kernel. It is necessary to reduce the overhead caused by the real-time kernel task control for the speed-up of the motion control of the mechatronics equipment. For this, customizing the task control function is needed. We developed internal data non-cryptic type real-time kernel ZRK to evaluate this method, and applied to the control of the multi system automatic lathe. The effect of the speed-up of the task cooperation processing was able to be confirmed by combined task control processing on the task side program code using an internal data non-hiding type real-time kernel ZRK.

46 CFR 169.669 - Radiotelephone equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Machinery and Electrical Electrical Installations Operating at Potentials of Less Than 50 Volts on Vessels of Less Than 100 Gross Tons § 169.669 Radiotelephone equipment. A separate circuit from the...

Study of space shuttle EVA/IVA support requirements. Volume 1: Technical summary report

NASA Technical Reports Server (NTRS)

Copeland, R. J.; Wood, P. W., Jr.; Cox, R. L.

1973-01-01

Results are summarized which were obtained for equipment requirements for the space shuttle EVA/IVA pressure suit, life support system, mobility aids, vehicle support provisions, and energy 4 support. An initial study of tasks, guidelines, and constraints and a special task on the impact of a 10 psia orbiter cabin atmosphere are included. Supporting studies not related exclusively to any one group of equipment requirements are also summarized. Representative EVA/IVA task scenarios were defined based on an evaluation of missions and payloads. Analysis of the scenarios resulted in a total of 788 EVA/IVA's in the 1979-1990 time frame, for an average of 1.3 per shuttle flight. Duration was estimated to be under 4 hours on 98% of the EVA/IVA's, and distance from the airlock was determined to be 70 feet or less 96% of the time. Payload water vapor sensitivity was estimated to be significant on 9%-17% of the flights. Further analysis of the scenarios was carried out to determine specific equipment characteristics, such as suit cycle and mobility requirements.

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew look over Shuttle equipment in the Orbiter Processing Facility. In the foreground is Mission Specialist Wendy Lawrence, who is a new addition to the crew. Behind her are (left to right) Commander Eileen Collins and Mission Specialists Andy Thomas and Stephen Robinson. At the rear is Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew look over Shuttle equipment in the Orbiter Processing Facility. In the foreground is Mission Specialist Wendy Lawrence, who is a new addition to the crew. Behind her are (left to right) Commander Eileen Collins and Mission Specialists Andy Thomas and Stephen Robinson. At the rear is Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew look over flight equipment in the Orbiter Processing Facility. From left are Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center, Mission Specialists Soichi Noguchi, Andy Thomas, Charles Camarda and Wendy Lawrence. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. Not seen are Mission Commander Eileen Collins, Pilot James Kelly and Mission Specialist Stephen Robinson. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew look over flight equipment in the Orbiter Processing Facility. From left are Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center, Mission Specialists Soichi Noguchi, Andy Thomas, Charles Camarda and Wendy Lawrence. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. Not seen are Mission Commander Eileen Collins, Pilot James Kelly and Mission Specialist Stephen Robinson. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

LIGNITE FUEL ENHANCEMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Charles Bullinger

2005-02-07

The Design Team continued to conference this quarter. Their primary task during this timeframe was to finalize the dryer design based on information learned from the NDIC Pilot work and detailed design discussions at Barr offices in August. Heyl-Patterson was tasked with incorporating all comments and drafting drawings. They submitted a preliminary proposal which spawned detailed discussions about tube bundle, air locks, and fire suppression systems. The type of fire protection specified dictated the final structural arrangement. Three meetings were spent discussing the pro's and con's of suppression vs. ventilation systems. In the end, the dryer and bucket elevator willmore » have suppression systems and the remaining equipment will be explosion vented. This is in agreement with GRE's current insurer, FM Global. Three inlet airlocks were reduced to two and four outlets were reduced to three. The inlet plenum was subdivided for greater flexibility and sparging air added in the outlet plenum. It was also decided to use bundles with varied material, diameter, and tube & fin spacing. This will be completed in an effort to identify for us which configuration has the best heat transfer characteristics using coal as the fluidizing medium. The dryer will also be delivered in four pieces. This will allow for installation through the current access door on the Air Heater deck. The Input/Output list and functional description was completed and forwarded to Honeywell to finalize controls. Major pieces of equipment received this quarter were the Bucket Elevator, Liewell Screen, conveyors, and Motor Control Center. ICI completed removal of the wall separating Silo 28 from the dryer area; handrail and grating between the two areas has also been removed. They relocated a blowdown line. They moved an Air Heater basket access hatch.« less

An efficient approach to understanding and predicting the effects of multiple task characteristics on performance.

PubMed

Richardson, Miles

2017-04-01

In ergonomics there is often a need to identify and predict the separate effects of multiple factors on performance. A cost-effective fractional factorial approach to understanding the relationship between task characteristics and task performance is presented. The method has been shown to provide sufficient independent variability to reveal and predict the effects of task characteristics on performance in two domains. The five steps outlined are: selection of performance measure, task characteristic identification, task design for user trials, data collection, regression model development and task characteristic analysis. The approach can be used for furthering knowledge of task performance, theoretical understanding, experimental control and prediction of task performance. Practitioner Summary: A cost-effective method to identify and predict the separate effects of multiple factors on performance is presented. The five steps allow a better understanding of task factors during the design process.

40 CFR 60.692-3 - Standards: Oil-water separators.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standards: Oil-water separators. 60.692... Emissions From Petroleum Refinery Wastewater Systems § 60.692-3 Standards: Oil-water separators. (a) Each oil-water separator tank, slop oil tank, storage vessel, or other auxiliary equipment subject to the...

Four-port gas separation membrane module assembly

DOEpatents

Wynn, Nicholas P.; Fulton, Donald A.; Lokhandwala, Kaaeid A.; Kaschemekat, Jurgen

2010-07-20

A gas-separation membrane assembly, and a gas-separation process using the assembly. The assembly incorporates multiple gas-separation membranes in an array within a single vessel or housing, and is equipped with two permeate ports, enabling permeate gas to be withdrawn from both ends of the membrane module permeate pipes.

40 CFR 60.692-3 - Standards: Oil-water separators.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standards: Oil-water separators. 60.692... Emissions From Petroleum Refinery Wastewater Systems § 60.692-3 Standards: Oil-water separators. (a) Each oil-water separator tank, slop oil tank, storage vessel, or other auxiliary equipment subject to the...

40 CFR 60.692-3 - Standards: Oil-water separators.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standards: Oil-water separators. 60.692... Emissions From Petroleum Refinery Wastewater Systems § 60.692-3 Standards: Oil-water separators. (a) Each oil-water separator tank, slop oil tank, storage vessel, or other auxiliary equipment subject to the...

Maximally Expressive Task Modeling

NASA Technical Reports Server (NTRS)

Japp, John; Davis, Elizabeth; Maxwell, Theresa G. (Technical Monitor)

2002-01-01

Planning and scheduling systems organize "tasks" into a timeline or schedule. The tasks are defined within the scheduling system in logical containers called models. The dictionary might define a model of this type as "a system of things and relations satisfying a set of rules that, when applied to the things and relations, produce certainty about the tasks that are being modeled." One challenging domain for a planning and scheduling system is the operation of on-board experiment activities for the Space Station. The equipment used in these experiments is some of the most complex hardware ever developed by mankind, the information sought by these experiments is at the cutting edge of scientific endeavor, and the procedures for executing the experiments are intricate and exacting. Scheduling is made more difficult by a scarcity of space station resources. The models to be fed into the scheduler must describe both the complexity of the experiments and procedures (to ensure a valid schedule) and the flexibilities of the procedures and the equipment (to effectively utilize available resources). Clearly, scheduling space station experiment operations calls for a "maximally expressive" modeling schema. Modeling even the simplest of activities cannot be automated; no sensor can be attached to a piece of equipment that can discern how to use that piece of equipment; no camera can quantify how to operate a piece of equipment. Modeling is a human enterprise-both an art and a science. The modeling schema should allow the models to flow from the keyboard of the user as easily as works of literature flowed from the pen of Shakespeare. The Ground Systems Department at the Marshall Space Flight Center has embarked on an effort to develop a new scheduling engine that is highlighted by a maximally expressive modeling schema. This schema, presented in this paper, is a synergy of technological advances and domain-specific innovations.

Army Synthetic Validity Project Report of Phase 2 Results. Volume 2. Appendixes

DTIC Science & Technology

1990-10-01

to Equipment & Food o Personal Hygine - Field & Garrison (4) o Kitchen Equipment - Garrison o Field Preparation of Foods & Equipment o Food, Field...Results: Volume II: Appendi i 12. PERSONAL AUTHOR(S) Wise, Lauress L. (AIR); Peterson, Norman G.; Houston, Janis (PDRI); Hoffman, R. Gene Campbell, John...o Handling KIA o Personal Hygiene & Preventive Medicine Numbers in parentheses indicate the number of participants that identified the task as

Alternative polymer separation technology by centrifugal force in a melted state.

PubMed

Dobrovszky, Károly; Ronkay, Ferenc

2014-11-01

In order to upgrade polymer waste during recycling, separation should take place at high purity. The present research was aimed to develop a novel, alternative separation opportunity, where the polymer fractions were separated by centrifugal force in melted state. The efficiency of the constructed separation equipment was verified by two immiscible plastics (polyethylene terephthalate, PET; low density polyethylene, LDPE), which have a high difference of density, and of which large quantities can also be found in the municipal solid waste. The results show that the developed equipment is suitable not only for separating dry blended mixtures of PET/LDPE into pure components again, but also for separating prefabricated polymer blends. By this process it becomes possible to recover pure polymer substances from multi-component products during the recycling process. The adequacy of results was verified by differential scanning calorimetry (DSC) measurement as well as optical microscopy and Raman spectroscopy. Copyright © 2014 Elsevier Ltd. All rights reserved.

Household food waste separation behavior and the importance of convenience.

PubMed

Bernstad, Anna

2014-07-01

Two different strategies aiming at increasing household source-separation of food waste were assessed through a case-study in a Swedish residential area (a) use of written information, distributed as leaflets amongst households and (b) installation of equipment for source-segregation of waste with the aim of increasing convenience food waste sorting in kitchens. Weightings of separately collected food waste before and after distribution of written information suggest that this resulted in neither a significant increased amount of separately collected food waste, nor an increased source-separation ratio. After installation of sorting equipment in households, both the amount of separately collected food waste as well as the source-separation ratio increased vastly. Long-term monitoring shows that results where longstanding. Results emphasize the importance of convenience and existence of infrastructure necessary for source-segregation of waste as important factors for household waste recycling, but also highlight the need of addressing these aspects where waste is generated, i.e. already inside the household. Copyright © 2014 Elsevier Ltd. All rights reserved.

Electrician's Mate 3 & 2: Rate Training Manual.

ERIC Educational Resources Information Center

Naval Education and Training Command, Pensacola, FL.

The training manual provides information related to the tasks assigned to the Electrician's Mate Third and Second Class who operate and maintain power and lighting systems and associated equipment. Individual chapters deal with: career challenges for the Electrician's Mate, safety precautions, test equipment, electrical installations, A-C power…

Commercial Truck/Equipment Technician. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) for commercial truck and equipment technician is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The task list of the National…

Separation of the global and local components in functional near-infrared spectroscopy signals using principal component spatial filtering

PubMed Central

Zhang, Xian; Noah, Jack Adam; Hirsch, Joy

2016-01-01

Abstract. Global systemic effects not specific to a task can be prominent in functional near-infrared spectroscopy (fNIRS) signals and the separation of task-specific fNIRS signals and global nonspecific effects is challenging due to waveform correlations. We describe a principal component spatial filter algorithm for separation of the global and local effects. The effectiveness of the approach is demonstrated using fNIRS signals acquired during a right finger-thumb tapping task where the response patterns are well established. Both the temporal waveforms and the spatial pattern consistencies between oxyhemoglobin and deoxyhemoglobin signals are significantly improved, consistent with the basic physiological basis of fNIRS signals and the expected pattern of activity associated with the task. PMID:26866047

Criteria-based evaluation of group 3 level memory telefacsimile equipment for interlibrary loan.

PubMed Central

Bennett, V M; Wood, M S; Malcom, D L

1990-01-01

The Interlibrary Loan, Document Delivery, and Union List Task Force of the Health Sciences Libraries Consortium (HSLC)--with nineteen libraries located in Philadelphia, Pittsburgh, and Hershey, Pennsylvania, and Delaware--accepted the charge of evaluating and recommending for purchase telefacsimile hardware to further interlibrary loan among HSLC members. To allow a thorough and scientific evaluation of group 3 level telefacsimile equipment, the task force identified ninety-six hardware features, which were grouped into nine broad criteria. These features formed the basis of a weighted analysis that identified three final candidates, with one model recommended to the HSLC board. This article details each of the criteria and discusses features in terms of library applications. The evaluation grid developed in the weighted analysis process should aid librarians charged with the selection of level 3 telefacsimile equipment. PMID:2328361

Didactical determinants use of information and communication technology in process of training of future specialists.

PubMed

Palamar, Borys I; Vaskivska, Halyna O; Palamar, Svitlana P

In the article the author touches upon the subject of significance of computer equipment for organization of cooperation of professor and future specialists. Such subject-subject interaction may be directed to forming of professional skills of future specialists. By using information and communication technologies in education system range of didactic tasks can be solved. Improving of process of teaching of subjects in high school, self-learning future specialists, motivating to learning and self-learning, the development of reflection in the learning process. The authors considers computer equipment as instrument for development of intellectual skills, potential and willingness of future specialists to solve communicative and communication tasks and problems on the creative basis. Based on results of researches the author comes to certain conclusions about the effectiveness of usage of computer technologies in process of teaching future specialists and their self-learning. Improper supplying of high schools with computer equipment, lack of appropriate educational programs, professors' teachers' poor knowledge and usage of computers have negative impact on organization of process of teaching disciplines in high schools. Computer equipment and ICT in general are the instruments of development of intellectual skills, potential and willingness of future specialists to solve communicative and communication tasks and problems. So, the formation of psychosocial environment of development of future specialist is multifaceted, complex and didactically important issue.

Evaluating alternative service contracts for medical equipment.

PubMed

De Vivo, L; Derrico, P; Tomaiuolo, D; Capussotto, C; Reali, A

2004-01-01

Managing medical equipments is a formidable task that has to be pursued maximizing the benefits within a highly regulated and cost-constrained environment. Clinical engineers are uniquely equipped to determine which policies are the most efficacious and cost effective for a health care institution to ensure that medical devices meet appropriate standards of safety, quality and performance. Part of this support is a strategy for preventive and corrective maintenance. This paper describes an alternative scheme of OEM (Original Equipment Manufacturer) service contract for medical equipment that combines manufacturers' technical support and in-house maintenance. An efficient and efficacious organization can reduce the high cost of medical equipment maintenance while raising reliability and quality. Methodology and results are discussed.

Diesel Equipment Department. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

Eleven student learning guides are provided for the duty entitled "completing core curriculum" of the diesel equipment program. Each learning guide concerns one of the tasks that comprise the duty. Introductory materials for each guide include the purpose and performance and enabling objectives. For each enabling objective, these materials are…

Metacognition of Multi-Tasking: How Well Do We Predict the Costs of Divided Attention?

PubMed Central

Finley, Jason R.; Benjamin, Aaron S.; McCarley, Jason S.

2014-01-01

Risky multi-tasking, such as texting while driving, may occur because people misestimate the costs of divided attention. In two experiments, participants performed a computerized visual-manual tracking task in which they attempted to keep a mouse cursor within a small target that moved erratically around a circular track. They then separately performed an auditory n-back task. After practicing both tasks separately, participants received feedback on their single-task tracking performance and predicted their dual-task tracking performance before finally performing the two tasks simultaneously. Most participants correctly predicted reductions in tracking performance under dual-task conditions, with a majority overestimating the costs of dual-tasking. However, the between-subjects correlation between predicted and actual performance decrements was near zero. This combination of results suggests that people do anticipate costs of multi-tasking, but have little metacognitive insight on the extent to which they are personally vulnerable to the risks of divided attention, relative to other people. PMID:24490818

Maximally Expressive Modeling of Operations Tasks

NASA Technical Reports Server (NTRS)

Jaap, John; Richardson, Lea; Davis, Elizabeth

2002-01-01

Planning and scheduling systems organize "tasks" into a timeline or schedule. The tasks are defined within the scheduling system in logical containers called models. The dictionary might define a model of this type as "a system of things and relations satisfying a set of rules that, when applied to the things and relations, produce certainty about the tasks that are being modeled." One challenging domain for a planning and scheduling system is the operation of on-board experiments for the International Space Station. In these experiments, the equipment used is among the most complex hardware ever developed, the information sought is at the cutting edge of scientific endeavor, and the procedures are intricate and exacting. Scheduling is made more difficult by a scarcity of station resources. The models to be fed into the scheduler must describe both the complexity of the experiments and procedures (to ensure a valid schedule) and the flexibilities of the procedures and the equipment (to effectively utilize available resources). Clearly, scheduling International Space Station experiment operations calls for a "maximally expressive" modeling schema.

Integrated scheduling of a container handling system with simultaneous loading and discharging operations

NASA Astrophysics Data System (ADS)

Li, Chen; Lu, Zhiqiang; Han, Xiaole; Zhang, Yuejun; Wang, Li

2016-03-01

The integrated scheduling of container handling systems aims to optimize the coordination and overall utilization of all handling equipment, so as to minimize the makespan of a given set of container tasks. A modified disjunctive graph is proposed and a mixed 0-1 programming model is formulated. A heuristic algorithm is presented, in which the original problem is divided into two subproblems. In the first subproblem, contiguous bay crane operations are applied to obtain a good quay crane schedule. In the second subproblem, proper internal truck and yard crane schedules are generated to match the given quay crane schedule. Furthermore, a genetic algorithm based on the heuristic algorithm is developed to search for better solutions. The computational results show that the proposed algorithm can efficiently find high-quality solutions. They also indicate the effectiveness of simultaneous loading and discharging operations compared with separate ones.

Engineering test results for the Moog Single Line Disconnect

NASA Technical Reports Server (NTRS)

Glubke, Scott E.

1990-01-01

New and innovative types of disconnects will be required to service, resupply, and maintain future spacecraft subsystems. Efficiently maintaining orbiting scientific instruments, spacecraft support systems, and a manned space station over a long period of time will require the periodic replenishment of consumables and the replacement of components. To accomplish these tasks, the fluid disconnect must be designed to allow the connection and separation of fluid lines and components with minimal hazard to crew and equipment. The capability to simply connect a refueling line or to easily replace a failed component greatly extends the life of a space based fluid system. A test program was initiated to evaluate the Moog Single Line Disconnect. The objective of the test program was to demonstrate the operational characteristics of the disconnect and to verify compliance with current safety regulations. The results of the program are summarized in the referenced document.

Team Training for Command and Control Systems: Status.

DTIC Science & Technology

1982-04-01

in order to develop this set of C 2 systems, including a project listing for the Electronic Systems Division (ESD) of the Air...do the job. Task analysis results in a detailed description of tasks and task steps, and associated environmental and equipment conditions and...simulation exercises match the projected threat either in terms of numbers or capabilities. Live exercises are even less satisfactory because

40 CFR 1518.3 - Policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... projects, including: (1) Leasing office space and providing utilities; (2) Leasing or purchasing equipment... costs for task force employees. (d) In carrying out the purposes of the OEQ Management Fund, the... studies or projects. (e) Task forces and projects funded by the OEQ Management Fund are permitted to make...

40 CFR 1518.3 - Policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... projects, including: (1) Leasing office space and providing utilities; (2) Leasing or purchasing equipment... costs for task force employees. (d) In carrying out the purposes of the OEQ Management Fund, the... studies or projects. (e) Task forces and projects funded by the OEQ Management Fund are permitted to make...

Program Improvement Project for Industrial Education. Annual Report.

ERIC Educational Resources Information Center

Shaeffer, Bruce W.

Designed to improve industrial education programs through the development of minimum uniform quality standards, a project developed a task list, educationally sequenced the identified tasks, and developed a recommended shop layout and equipment list for four occupational areas: diesel repair, appliance repair, office machine repair, and small…

Task Analysis Inventories. Series II.

ERIC Educational Resources Information Center

Wesson, Carl E.

This second in a series of task analysis inventories contains checklists of work performed in twenty-two occupations. Each inventory is a comprehensive list of work activities, responsibilities, educational courses, machines, tools, equipment, and work aids used and the products produced or services rendered in a designated occupational area. The…

Preliminary experimental results of gas recycling subsystems except carbon dioxide concentration

NASA Astrophysics Data System (ADS)

Otsuji, K.; Sawada, T.; Satoh, S.; Kanda, S.; Matsumura, H.; Kondo, S.; Otsubo, K.

Oxygen concentration and separation is an essential factor for air recycling in a CELSS. Furthermore, if the value of the plant assimilatory quotient is not coincident with that of the animal respiratory quotient, the recovery of O2 from the concentrated CO2 through chemical methods will become necessary to balance the gas contents in a CELSS. Therefore, oxygen concentration and separation equipment using Salcomine and O2 recovery equipment, such as Sabatier and Bosch reactors, were experimentally developed and tested.

A Performance Assessment of an Airborne Separation Assistance System Using Realistic Complex Traffic Flows

NASA Technical Reports Server (NTRS)

Smith, Jeremy C.; Bussink, Frank J. L.

2008-01-01

This paper presents the results from a study that investigates the performance of a tactical Airborne Separation Assistance System (ASAS) in en route airspace, under varying demand levels, with realistic traffic flows. The ASAS concept studied here allows flight crews of equipped aircraft to perform separation from other air traffic autonomously. This study addresses the tactical aspects of an ASAS using aircraft state data (i.e. position and velocity) to detect and resolve projected conflicts. In addition, use of a conflict prevention system helps ASAS-equipped aircraft avoid maneuvers that may cause new conflicts. ASAS-capable aircraft are equipped with satellite-based navigation and Automatic Dependent Surveillance Broadcast (ADS-B) for transmission and receipt of aircraft state data. In addition to tactical conflict detection and resolution (CD&R), a complete, integrated ASAS is likely to incorporate a strategic CD&R component with a longer look-ahead time, using trajectory intent information. A system-wide traffic flow management (TFM) component, located at the FAA command center helps aircraft to avoid regions of excessive traffic density and complexity. A Traffic Alert and Collision Avoidance System (TCAS), as used today is the system of last resort. This integrated approach avoids sole reliance on the use of the tactical CD&R studied here, but the tactical component remains a critical element of the complete ASAS. The focus of this paper is to determine to what extent the proposed tactical component of ASAS alone can maintain aircraft separation at demand levels up to three times that of current traffic. The study also investigates the effect of mixing ASAS-equipped aircraft with unequipped aircraft (i.e. current day) that do not have the capability to self-separate. Position and velocity data for unequipped aircraft needs to be available to ASASequipped. Most likely, for this future concept, state data would be available from instrument flight rules (IFR) aircraft, equipped with at least ADS-B transmission capability. The objective is to reduce the number of losses of separation to a minimum and investigate the limits of tactical-only CD&R. Thus, the objective is not, expressly, to achieve zero losses of separation with tactical ASAS because this is one component of an integrated ASAS.

Separating predictable and unpredictable work to manage interruptions and promote safe and effective work flow.

PubMed

Kowinsky, Amy M; Shovel, Judith; McLaughlin, Maribeth; Vertacnik, Lisa; Greenhouse, Pamela K; Martin, Susan Christie; Minnier, Tamra E

2012-01-01

Predictable and unpredictable patient care tasks compete for caregiver time and attention, making it difficult for patient care staff to reliably and consistently meet patient needs. We have piloted a redesigned care model that separates the work of patient care technicians based on task predictability and creates role specificity. This care model shows promise in improving the ability of staff to reliably complete tasks in a more consistent and timely manner.

A cost and utility analysis of NIM/CAMAC standards and equipment for shuttle payload data acquisition and control systems. Volume 3: Tasks 3 and 4

NASA Technical Reports Server (NTRS)

1976-01-01

The modifications for the Nuclear Instrumentation Modular (NIM) and Computer Automated Measurement Control (CAMAC) equipment, designed for ground based laboratory use, that would be required to permit its use in the Spacelab environments were determined. The cost of these modifications were estimated and the most cost effective approach to implementing them were identified. A shared equipment implementation in which the various Spacelab users draw their required complement of standard NIM and CAMAC equipment for a given flight from a common equipment pool was considered. The alternative approach studied was a dedicated equipment implementation in which each of the users is responsible for procuring either their own NIM/CAMAC equipment or its custom built equivalent.

Selecting the right ultrasound equipment--an administrator's perspective.

PubMed

Jacoby, Robert

2003-01-01

Recent advancements in ultrasound equipment, technology and capability make the selection of new or replacement equipment a difficult task. It is not uncommon that the sonographers will have different needs and wants from the equipment than do the radiologists. This potential hurdle needs to be addressed in order to arrive at a mutually acceptable selection. Vendors across the board all have very competitive products and they each have that special little "function" or "enhancement" that sets them apart from their competitor. The customer needs to approach the evaluation of the equipment in a very objective manner in order to truly understand not only the differences of each piece of equipment but the actual capability of each piece of equipment. In the end however, it is the individual sonographer that will be utilizing the equipment most of the time and they should have the final say to department management as to which equipment is selected.

Design of a video system providing optimal visual information for controlling payload and experiment operations with television

NASA Technical Reports Server (NTRS)

1975-01-01

A program was conducted which included the design of a set of simplified simulation tasks, design of apparatus and breadboard TV equipment for task performance, and the implementation of a number of simulation tests. Performance measurements were made under controlled conditions and the results analyzed to permit evaluation of the relative merits (effectivity) of various TV systems. Burden factors were subsequently generated for each TV system to permit tradeoff evaluation of system characteristics against performance. For the general remote operation mission, the 2-view system is recommended. This system is characterized and the corresponding equipment specifications were generated.

Assessing Internet energy intensity: A review of methods and results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coroama, Vlad C., E-mail: vcoroama@gmail.com; Hilty, Lorenz M.; Empa, Swiss Federal Laboratories for Materials Science and Technology, Lerchenfeldstr. 5, 9014 St. Gallen

Assessing the average energy intensity of Internet transmissions is a complex task that has been a controversial subject of discussion. Estimates published over the last decade diverge by up to four orders of magnitude — from 0.0064 kilowatt-hours per gigabyte (kWh/GB) to 136 kWh/GB. This article presents a review of the methodological approaches used so far in such assessments: i) top–down analyses based on estimates of the overall Internet energy consumption and the overall Internet traffic, whereby average energy intensity is calculated by dividing energy by traffic for a given period of time, ii) model-based approaches that model all componentsmore » needed to sustain an amount of Internet traffic, and iii) bottom–up approaches based on case studies and generalization of the results. Our analysis of the existing studies shows that the large spread of results is mainly caused by two factors: a) the year of reference of the analysis, which has significant influence due to efficiency gains in electronic equipment, and b) whether end devices such as personal computers or servers are included within the system boundary or not. For an overall assessment of the energy needed to perform a specific task involving the Internet, it is necessary to account for the types of end devices needed for the task, while the energy needed for data transmission can be added based on a generic estimate of Internet energy intensity for a given year. Separating the Internet as a data transmission system from the end devices leads to more accurate models and to results that are more informative for decision makers, because end devices and the networking equipment of the Internet usually belong to different spheres of control. -- Highlights: • Assessments of the energy intensity of the Internet differ by a factor of 20,000. • We review top–down, model-based, and bottom–up estimates from literature. • Main divergence factors are the year studied and the inclusion of end devices. • We argue against extending the Internet system boundary beyond data transmission. • Decision-makers need data that differentiates between end devices and transmission.« less

A new virtual-reality training module for laparoscopic surgical skills and equipment handling: can multitasking be trained? A randomized controlled trial.

PubMed

Bongers, Pim J; Diederick van Hove, P; Stassen, Laurents P S; Dankelman, Jenny; Schreuder, Henk W R

2015-01-01

During laparoscopic surgery distractions often occur and multitasking between surgery and other tasks, such as technical equipment handling, is a necessary competence. In psychological research, reduction of adverse effects of distraction is demonstrated when specifically multitasking is trained. The aim of this study was to examine whether multitasking and more specifically task-switching can be trained in a virtual-reality (VR) laparoscopic skills simulator. After randomization, the control group trained separately with an insufflator simulation module and a laparoscopic skills exercise module on a VR simulator. In the intervention group, insufflator module and VR skills exercises were combined to develop a new integrated training in which multitasking was a required competence. At random moments, problems with the insufflator appeared and forced the trainee to multitask. During several repetitions of a different multitask VR skills exercise as posttest, performance parameters (laparoscopy time, insufflator time, and errors) were measured and compared between both the groups as well with a pretest exercise to establish the learning effect. A face-validity questionnaire was filled afterward. University Medical Centre Utrecht, The Netherlands. Medical and PhD students (n = 42) from University Medical Centre Utrecht, without previous experience in laparoscopic simulation, were randomly assigned to either intervention (n = 21) or control group (n = 21). All participants performed better in the posttest exercises without distraction of the insufflator compared with the exercises in which multitasking was necessary to solve the insufflator problems. After training, the intervention group was significantly quicker in solving the insufflator problems (mean = 1.60Log(s) vs 1.70Log(s), p = 0.02). No significant differences between both the groups were seen in laparoscopy time and errors. Multitasking has negative effects on the laparoscopic performance. This study suggests an additional learning effect of training multitasking in VR laparoscopy simulation, because the trainees are able to handle a secondary task (solving insufflator problems) quicker. These results may aid the development of laparoscopy VR training programs in approximating real-life laparoscopic surgery. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

76 FR 74585 - Railroad Workplace Safety; Adjacent-Track On-Track Safety for Roadway Workers

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-30

... roadway workers on the ground is engaged in a common task with on-track, self-propelled equipment or..., self-propelled equipment on an occupied track. These amendments to the Roadway Worker Protection Rule... effective, the RWP Rule requires that roadway work groups engaged in ``large-scale maintenance or...

Improving the Repair Planning System for Mining Equipment on the Basis of Non-destructive Evaluation Data

NASA Astrophysics Data System (ADS)

Drygin, Michael; Kuryshkin, Nicholas

2017-11-01

The article tells about forming a new concept of scheduled preventive repair system of the equipment at coal mining enterprises, based on the use of modem non-destructive evaluation methods. The approach to the solution for this task is based on the system-oriented analysis of the regulatory documentation, non-destructive evaluation methods and means, experimental studies with compilation of statistics and subsequent grapho-analytical analysis. The main result of the work is a feasible explanation of using non-destructive evaluation methods within the current scheduled preventive repair system, their high efficiency and the potential of gradual transition to condition-based maintenance. In practice wide use of nondestructive evaluation means w;ill allow to reduce significantly the number of equipment failures and to repair only the nodes in pre-accident condition. Considering the import phase-out policy, the solution for this task will allow to adapt the SPR system to Russian market economy conditions and give the opportunity of commercial move by reducing the expenses for maintenance of Russian-made and imported equipment.

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew look over flight equipment in the Orbiter Processing Facility. From left are Mission Commander Eileen Collins; Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center; and Mission Specialists Soichi Noguchi and Charles Camarda. In the foreground is Mission Specialist Wendy Lawrence. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. Not seen are Pilot James Kelly and Mission Specialists Andy Thomas and Stephen Robinson. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew look over flight equipment in the Orbiter Processing Facility. From left are Mission Commander Eileen Collins; Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center; and Mission Specialists Soichi Noguchi and Charles Camarda. In the foreground is Mission Specialist Wendy Lawrence. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. Not seen are Pilot James Kelly and Mission Specialists Andy Thomas and Stephen Robinson. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

MAGTF (Marine Air Ground Task Force) Data Transfer Alternatives (1986-1996).

DTIC Science & Technology

1986-04-01

Devices currently on the market offer circuit conditioning and access control as well as the required dial-up connectivity. A program to provide dial... UGC -74A(V)3 Communication Terminal (Teletype Writer (TTY) CV-3591 Advanced Narrowband Digital Voice Terminal (ANDVT) AN/TGC-46 TTY Central (part of AN...interface directly with both AN/ UGC -74 TTY and ADPE-FMF/EUC equipment over serial circuits. 5.5.2.2 Switching Equipment. Switching equipments perform the

Alternative polymer separation technology by centrifugal force in a melted state

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobrovszky, Károly; Ronkay, Ferenc, E-mail: ronkay@pt.bme.hu

2014-11-15

Highlights: • Waste separation should take place at high purity. • Developed a novel, alternative separation method, where the separation occurred in a melted state by centrifugal forces. • Possibility of separation two different plastics into neat fractions. • High purity fractions were established at granulates and also at prefabricated blend. • Results were verified by DSC, optical microscopy and Raman spectroscopy. - Abstract: In order to upgrade polymer waste during recycling, separation should take place at high purity. The present research was aimed to develop a novel, alternative separation opportunity, where the polymer fractions were separated by centrifugal forcemore » in melted state. The efficiency of the constructed separation equipment was verified by two immiscible plastics (polyethylene terephthalate, PET; low density polyethylene, LDPE), which have a high difference of density, and of which large quantities can also be found in the municipal solid waste. The results show that the developed equipment is suitable not only for separating dry blended mixtures of PET/LDPE into pure components again, but also for separating prefabricated polymer blends. By this process it becomes possible to recover pure polymer substances from multi-component products during the recycling process. The adequacy of results was verified by differential scanning calorimetry (DSC) measurement as well as optical microscopy and Raman spectroscopy.« less

New characterisation method of electrical and electronic equipment wastes (WEEE).

PubMed

Menad, N; Guignot, S; van Houwelingen, J A

2013-03-01

Innovative separation and beneficiation techniques of various materials encountered in electrical and electronic equipment wastes (WEEE) is a major improvement for its recycling. Mechanical separation-oriented characterisation of WEEE was conducted in an attempt to evaluate the amenability of mechanical separation processes. Properties such as liberation degree of fractions (plastics, metals ferrous and non-ferrous), which are essential for mechanical separation, are analysed by means of a grain counting approach. Two different samples from different recycling industries were characterised in this work. The first sample is a heterogeneous material containing different types of plastics, metals (ferrous and non-ferrous), printed circuit board (PCB), rubber and wood. The second sample contains a mixture of mainly plastics. It is found for the first sample that all aluminium particles are free (100%) in all investigated size fractions. Between 92% and 95% of plastics are present as free particles; however, 67% in average of ferromagnetic particles are liberated. It can be observed that only 42% of ferromagnetic particles are free in the size fraction larger than 20mm. Particle shapes were also quantified manually particle by particle. The results show that the particle shapes as a result of shredding, turn out to be heterogeneous, thereby complicating mechanical separation processes. In addition, the separability of various materials was ascertained by a sink-float analysis and eddy current separation. The second sample was separated by automatic sensor sorting in four different products: ABS, PC-ABS, PS and rest product. The fractions were characterised by using the methodology described in this paper. The results show that the grade and liberation degree of the plastic products ABS, PC-ABS and PS are close to 100%. Sink-float separation and infrared plastic identification equipment confirms the high plastic quality. On the basis of these findings, a global separation flow sheet is proposed to improve the plastic separation of WEEE. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of a Methodology for Assessing Aircrew Workloads.

DTIC Science & Technology

1981-11-01

Workload Feasibility Study. .. ...... 52 Subjects. .. .............. ........ 53 Equipment .. ............... ....... 53 Date Analysis ... analysis ; simulation; standard time systems; switching synthetic time systems; task activities; task interference; time study; tracking; workload; work sampl...standard data systems, information content analysis , work sampling and job evaluation. Con- ventional methods were found to be deficient in accounting

Report of the Television Task Force.

ERIC Educational Resources Information Center

Bedell, Fran; And Others

In early 1985, one of the new television channels resulting from the expansion of the Fort Smith TV Cable Company was allocated to Westark Community College (WCC). In July, a task force was appointed to develop recommendations regarding programming, policies, staffing, equipment, physical location, and organizational location. This report presents…

44 CFR 208.45 - Advance of funds.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Agreements § 208.45 Advance of funds. At the time of Activation of a Task Force, the Task Force will develop... advance of funds will not include any costs for equipment purchase. ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Advance of funds. 208.45...

Geometry and gravity influences on strength capability

NASA Technical Reports Server (NTRS)

Poliner, Jeffrey; Wilmington, Robert P.; Klute, Glenn K.

1994-01-01

Strength, defined as the capability of an individual to produce an external force, is one of the most important determining characteristics of human performance. Knowledge of strength capabilities of a group of individuals can be applied to designing equipment and workplaces, planning procedures and tasks, and training individuals. In the manned space program, with the high risk and cost associated with spaceflight, information pertaining to human performance is important to ensuring mission success and safety. Knowledge of individual's strength capabilities in weightlessness is of interest within many areas of NASA, including workplace design, tool development, and mission planning. The weightless environment of space places the human body in a completely different context. Astronauts perform a variety of manual tasks while in orbit. Their ability to perform these tasks is partly determined by their strength capability as demanded by that particular task. Thus, an important step in task planning, development, and evaluation is to determine the ability of the humans performing it. This can be accomplished by utilizing quantitative techniques to develop a database of human strength capabilities in weightlessness. Furthermore, if strength characteristics are known, equipment and tools can be built to optimize the operators' performance. This study examined strength in performing a simple task, specifically, using a tool to apply a torque to a fixture.

Robotics in a controlled, ecological life support system

NASA Technical Reports Server (NTRS)

Miles, Gaines E.; Krom, Kimberly J.

1993-01-01

Controlled, Ecological Life Support Systems (CELSS) that utilize plants to provide food, water and oxygen could consume considerable amounts of labor unless crop production, recovery and processing are automated. Robotic manipulators equipped with special end-effectors and programmed to perform the sensing and materials handling tasks would minimize the amount of astronaut labor required. The Human Rated Test Facility (HRTF) planned for Johnson Space Center could discover and demonstrate techniques of crop production which can be reliably integrated with machinery to minimize labor requirements. Before the physical components (shelves, lighting fixtures, etc.) can be selected, a systems analysis must be performed to determine which alternative processes should be followed and how the materials handling tasks should be automated. Given that the current procedures used to grow crops in a CELSS may not be the best methods to automate, then what are the alternatives? How may plants be grown, harvested, processed for food, and the inedible components recycled? What commercial technologies current exist? What research efforts are underway to develop new technologies which might satisfy the need for automation in a CELSS? The answers to these questions should prove enlightening and provide some of the information necessary to perform the systems analysis. The planting, culturing, gathering, threshing and separation, food processing, and recovery of inedible portions of wheat were studied. The basic biological and materials handling processes of each task are defined and discussed. Current practices at Johnson Space Center and other NASA centers are described and compared to common production practices in the plant production industry. Technologies currently being researched which might be applicable are identified and illustrated. Finally, based on this knowledge, several scenarios are proposed for automating the tasks for wheat.

Task shifting and integration of HIV care into primary care in South Africa: The development and content of the streamlining tasks and roles to expand treatment and care for HIV (STRETCH) intervention

PubMed Central

2011-01-01

Background Task shifting and the integration of human immunodeficiency virus (HIV) care into primary care services have been identified as possible strategies for improving access to antiretroviral treatment (ART). This paper describes the development and content of an intervention involving these two strategies, as part of the Streamlining Tasks and Roles to Expand Treatment and Care for HIV (STRETCH) pragmatic randomised controlled trial. Methods: Developing the intervention The intervention was developed following discussions with senior management, clinicians, and clinic staff. These discussions revealed that the establishment of separate antiretroviral treatment services for HIV had resulted in problems in accessing care due to the large number of patients at ART clinics. The intervention developed therefore combined the shifting from doctors to nurses of prescriptions of antiretrovirals (ARVs) for uncomplicated patients and the stepwise integration of HIV care into primary care services. Results: Components of the intervention The intervention consisted of regulatory changes, training, and guidelines to support nurse ART prescription, local management teams, an implementation toolkit, and a flexible, phased introduction. Nurse supervisors were equipped to train intervention clinic nurses in ART prescription using outreach education and an integrated primary care guideline. Management teams were set up and a STRETCH coordinator was appointed to oversee the implementation process. Discussion Three important processes were used in developing and implementing this intervention: active participation of clinic staff and local and provincial management, educational outreach to train nurses in intervention sites, and an external facilitator to support all stages of the intervention rollout. The STRETCH trial is registered with Current Control Trials ISRCTN46836853. PMID:21810242

Pattern Separation and Goal-Directed Behavior in the Aged Canine

ERIC Educational Resources Information Center

Snigdha, Shikha; Yassa, Michael A.; deRivera, Christina; Milgram, Norton W.; Cotman, Carl W.

2017-01-01

The pattern separation task has recently emerged as a behavioral model of hippocampus function and has been used in several pharmaceutical trials. The canine is a useful model to evaluate a multitude of hippocampal-dependent cognitive tasks that parallel those in humans. Thus, this study was designed to evaluate the suitability of pattern…

Evaluating the Separate and Combined Effects of Positive and Negative Reinforcement on Task Compliance

ERIC Educational Resources Information Center

Bouxsein, Kelly J.; Roane, Henry S.; Harper, Tara

2011-01-01

Positive and negative reinforcement are effective for treating escape-maintained destructive behavior. The current study evaluated the separate and combined effects of these contingencies to increase task compliance. Results showed that a combination of positive and negative reinforcement was most effective for increasing compliance. (Contains 1…

Supplies and equipment for pediatric emergency mass critical care.

PubMed

Bohn, Desmond; Kanter, Robert K; Burns, Jeffrey; Barfield, Wanda D; Kissoon, Niranjan

2011-11-01

Epidemics of acute respiratory disease, such as severe acute respiratory syndrome in 2003, and natural disasters, such as Hurricane Katrina in 2005, have prompted planning in hospitals that offer adult critical care to increase their capacity and equipment inventory for responding to a major demand surge. However, planning at a national, state, or local level to address the particular medical resource needs of children for mass critical care has yet to occur in any coordinated way. This paper presents the consensus opinion of the Task Force regarding supplies and equipment that would be required during a pediatric mass critical care crisis. In May 2008, the Task Force for Mass Critical Care published guidance on provision of mass critical care to adults. Acknowledging that the critical care needs of children during disasters were unaddressed by this effort, a 17-member Steering Committee, assembled by the Oak Ridge Institute for Science and Education with guidance from members of the American Academy of Pediatrics, convened in April 2009 to determine priority topic areas for pediatric emergency mass critical care recommendations.Steering Committee members established subcommittees by topic area and performed literature reviews of MEDLINE and Ovid databases. The Steering Committee produced draft outlines through consensus-based study of the literature and convened October 6-7, 2009, in New York, NY, to review and revise each outline. Eight draft documents were subsequently developed from the revised outlines as well as through searches of MEDLINE updated through March 2010.The Pediatric Emergency Mass Critical Care Task Force, composed of 36 experts from diverse public health, medical, and disaster response fields, convened in Atlanta, GA, on March 29-30, 2010. Feedback on each manuscript was compiled and the Steering Committee revised each document to reflect expert input in addition to the most current medical literature. The Task Force endorsed the view that supplies and equipment must be available for a tripling of capacity above the usual peak pediatric intensive care unit capacity for at least 10 days. The recommended size-specific pediatric mass critical care equipment stockpile for two types of patients is presented in terms of equipment needs per ten mass critical care beds, which would serve 26 patients over a 10-day period. Specific recommendations are made regarding ventilator capacity, including the potential use of high-frequency oscillatory ventilation and extracorporeal membrane oxygenation. Other recommendations include inventories for disposable medical equipment, medications, and staffing levels.

A cost and utility analysis of NIM/CAMAC standards and equipment for shuttle payload data acquisition and control systems. Volume 2: Tasks 1 and 2

NASA Technical Reports Server (NTRS)

1976-01-01

A representative set of payloads for both science and applications disciplines were selected that would ensure a realistic and statistically significant estimate of equipment utilization. The selected payloads were analyzed to determine the applicability of Nuclear Instrumentation Modular (NIM)/Computer Automated Measurement Control (CAMAC) equipment in satisfying their data acquisition and control requirements. The analyses results were combined with the comparable results from related studies to arrive at an overall assessment of the applicability and commonality of NIM/CAMAC equipment usage across the spectrum of payloads.

Preliminary evidence of attenuated blood pressure reactivity to acute stress in adults following a recent marital separation.

PubMed

Grinberg, Austin M; O'Hara, Karey L; Sbarra, David A

2018-03-01

This study explores cardiovascular reactivity during an acute-stress task in a sample of recently separated adults. In a cross-sectional design, we examined the association between adults' subjective separation-related distress and changes in heart rate and blood pressure across the acute-stress laboratory paradigm in a sample of 133 (n = 49 men) recently separated adults. Heart rate (HR) and Blood pressure (BP) were recorded across a resting baseline period, a math stressor task, and a recovery period. Multilevel analyses revealed that adults who reported greater separation-related distress exhibited higher initial BP and a slower linear increase in BP across the study period. In addition, adults reporting greater separation-related distress evidenced significantly slower declines in diastolic blood pressure (DBP) following the acute-stress task. HR reactivity was not moderated by separation-related distress. In recently separated adults, preliminary evidence suggests that the context of the stressors may reveal differential patterns of problematic reactivity (exaggerated or blunted responding). Greater emotional intrusion and hyperactivity symptoms may index increased risk for blunted cardiovascular reactivity to general stressors. This pattern of reactivity is consistent with models of allostatic load that emphasise the deleterious effect of hyporesponsivity to environmental demands.

40 CFR 63.1044 - Standards-Separator vented to control device.

Code of Federal Regulations, 2012 CFR

2012-07-01

... outdoor exposure to wind, moisture, and sunlight; and the operating practices used for the separator on... operator shall inspect and monitor the air emission control equipment in accordance with the procedures...

40 CFR 63.1044 - Standards-Separator vented to control device.

Code of Federal Regulations, 2010 CFR

2010-07-01

... outdoor exposure to wind, moisture, and sunlight; and the operating practices used for the separator on... operator shall inspect and monitor the air emission control equipment in accordance with the procedures...

40 CFR 63.1044 - Standards-Separator vented to control device.

Code of Federal Regulations, 2013 CFR

2013-07-01

... outdoor exposure to wind, moisture, and sunlight; and the operating practices used for the separator on... operator shall inspect and monitor the air emission control equipment in accordance with the procedures...

40 CFR 63.1044 - Standards-Separator vented to control device.

Code of Federal Regulations, 2014 CFR

2014-07-01

... outdoor exposure to wind, moisture, and sunlight; and the operating practices used for the separator on... operator shall inspect and monitor the air emission control equipment in accordance with the procedures...

40 CFR 63.1044 - Standards-Separator vented to control device.

Code of Federal Regulations, 2011 CFR

2011-07-01

... outdoor exposure to wind, moisture, and sunlight; and the operating practices used for the separator on... operator shall inspect and monitor the air emission control equipment in accordance with the procedures...

Instrument Control (iC) – An Open-Source Software to Automate Test Equipment

PubMed Central

Pernstich, K. P.

2012-01-01

It has become common practice to automate data acquisition from programmable instrumentation, and a range of different software solutions fulfill this task. Many routine measurements require sequential processing of certain tasks, for instance to adjust the temperature of a sample stage, take a measurement, and repeat that cycle for other temperatures. This paper introduces an open-source Java program that processes a series of text-based commands that define the measurement sequence. These commands are in an intuitive format which provides great flexibility and allows quick and easy adaptation to various measurement needs. For each of these commands, the iC-framework calls a corresponding Java method that addresses the specified instrument to perform the desired task. The functionality of iC can be extended with minimal programming effort in Java or Python, and new measurement equipment can be addressed by defining new commands in a text file without any programming. PMID:26900522

Maximally Expressive Modeling

NASA Technical Reports Server (NTRS)

Jaap, John; Davis, Elizabeth; Richardson, Lea

2004-01-01

Planning and scheduling systems organize tasks into a timeline or schedule. Tasks are logically grouped into containers called models. Models are a collection of related tasks, along with their dependencies and requirements, that when met will produce the desired result. One challenging domain for a planning and scheduling system is the operation of on-board experiments for the International Space Station. In these experiments, the equipment used is among the most complex hardware ever developed; the information sought is at the cutting edge of scientific endeavor; and the procedures are intricate and exacting. Scheduling is made more difficult by a scarcity of station resources. The models to be fed into the scheduler must describe both the complexity of the experiments and procedures (to ensure a valid schedule) and the flexibilities of the procedures and the equipment (to effectively utilize available resources). Clearly, scheduling International Space Station experiment operations calls for a maximally expressive modeling schema.

Instrument Control (iC) - An Open-Source Software to Automate Test Equipment.

PubMed

Pernstich, K P

2012-01-01

It has become common practice to automate data acquisition from programmable instrumentation, and a range of different software solutions fulfill this task. Many routine measurements require sequential processing of certain tasks, for instance to adjust the temperature of a sample stage, take a measurement, and repeat that cycle for other temperatures. This paper introduces an open-source Java program that processes a series of text-based commands that define the measurement sequence. These commands are in an intuitive format which provides great flexibility and allows quick and easy adaptation to various measurement needs. For each of these commands, the iC-framework calls a corresponding Java method that addresses the specified instrument to perform the desired task. The functionality of iC can be extended with minimal programming effort in Java or Python, and new measurement equipment can be addressed by defining new commands in a text file without any programming.

Marital Dissolution and Blood Pressure Reactivity: Evidence for the Specificity of Emotional Intrusion-Hyperarousal and Task-Rated Emotional Difficulty

PubMed Central

Sbarra, David A.; Law, Rita W.; Lee, Lauren A.; Mason, Ashley E.

2015-01-01

Objective To assess blood pressure (BP) reactivity as recently separated adults completed a laboratory task asking to mentally reflect on their relationship experiences. Marital separations and the experience of divorce are associated with increased risk for early mortality and poor health outcomes. Few studies, however, have investigated the potential psychophysiological mechanisms that may account for these broad-based associations. Method Seventy recently separated or divorced community-dwelling adults (26 men) completed self-report measures of divorce-related psychological adjustment. During a laboratory visit, quasi-continuous BP was assessed across four task periods, including a divorce-specific mental activation task (DMAT). A task-rated emotional difficulty (TRED) index was computed based on participants’ immediate appraisals of the task demands. Results After accounting for relevant health-related covariates and depressed mood, participants who reported higher degrees of divorce-related emotional intrusion and physical hyperarousal demonstrated significantly elevated resting BP at entry into the study. When assessing change from a within-person control task to the DMAT, a three-way interaction indicated that men reporting high TRED scores evidenced significant increases in BP, whereas men reporting low TRED scores evidenced significant decreases in BP. Women evidenced no significant changes in BP across study periods. Conclusions Results suggest that divorce-related emotional intrusion-hyperarousal and real-time ratings of emotional difficulty (when people think about their separation experience) may play a specific role in BP reactivity, especially for men. These data shed new light on the potential mechanisms that may link marital dissolution and poor health. PMID:19414618

Marital dissolution and blood pressure reactivity: evidence for the specificity of emotional intrusion-hyperarousal and task-rated emotional difficulty.

PubMed

Sbarra, David A; Law, Rita W; Lee, Lauren A; Mason, Ashley E

2009-06-01

To assess blood pressure (BP) reactivity as recently separated adults completed a laboratory task asking to mentally reflect on their relationship experiences. Marital separations and the experience of divorce are associated with increased risk for early mortality and poor health outcomes. Few studies, however, have investigated the potential psychophysiological mechanisms that may account for these broad-based associations. Seventy recently separated or divorced community-dwelling adults (26 men) completed self-report measures of divorce-related psychological adjustment. During a laboratory visit, quasi-continuous BP was assessed across four task periods, including a divorce-specific mental activation task (DMAT). A task-rated emotional difficulty (TRED) index was computed based on participants' immediate appraisals of the task demands. After accounting for relevant health-related covariates and depressed mood, participants who reported higher degrees of divorce-related emotional intrusion and physical hyperarousal demonstrated significantly elevated resting BP at entry into the study. When assessing change from a within-person control task to the DMAT, a three-way interaction indicated that men reporting high TRED scores evidenced significant increases in BP, whereas men reporting low TRED scores evidenced significant decreases in BP. Women evidenced no significant changes in BP across study periods. Results suggest that divorce-related emotional intrusion-hyperarousal and real-time ratings of emotional difficulty (when people think about their separation experience) may play a specific role in BP reactivity, especially for men. These data shed new light on the potential mechanisms that may link marital dissolution and poor health.

A survey of airborne and skin exposures to chemicals in footwear and equipment factories in Thailand.

PubMed

Todd, Lori A; Mottus, Kathleen; Mihlan, Gary J

2008-03-01

This research reports on a pilot industrial hygiene study that was performed at four footwear factories and two equipment factories in Thailand. Workers in these factories were exposed through inhalation and dermal contact to a large number of organic vapors from solvents and cements that were hand applied. In addition, these workers were exposed to highly toxic isocyanates primarily through the dermal route. A total of 286 personal air samples were obtained at the four footwear factories using organic vapor monitors; individual job tasks were monitored using a real-time MIRAN Spectrometer. A total of 64 surface, tool, or hand samples were monitored for isocyanates using surface contamination detectors. Real-time measurements were also obtained for organic vapors in two equipment factories. From 8% to 21% of the workers sampled in each footwear factory were overexposed to mixtures of chemicals from solvents and cements. Up to 100% of the workers performing specific job tasks were overexposed to mixtures of chemicals. From 39% to 69% of the surface samples were positive for unreacted isocyanates. Many of the real-time measurements obtained in the equipment factories exceeded occupational exposure limits. Personal protective equipment and engineering controls were inadequate in all of the factories.

Improved, low cost inorganic-organic separators for rechargeable silver-zinc batteries

NASA Technical Reports Server (NTRS)

Sheibley, D. W.

1979-01-01

Several flexible, low-cost inorganic-organic separators with performance characteristics and cycle life equal to, or better than, the Lewis Research Center Astropower separator were developed. These new separators can be made on continuous-production equipment at about one-fourth the cost of the Astropower separator produced the same way. In test cells, these new separators demonstrate cycle life improvement, acceptable operating characteristics, and uniform current density. The various separator formulas, test cell construction, and data analysis are described.

Evaluation of artillery equipment maintenance support capability based on grey clustering

NASA Astrophysics Data System (ADS)

Zhai, Mei-jie; Gao, Peng

2017-12-01

This paper, the theory and method of evaluating the capability of equipment maintenance support in China and abroad are studied, from the point of view of the combat task of artillery troops and the strategic attachment in the future military struggle. This paper establishes the framework of the evaluation Index system of the equipment maintenance support capability of the artillery units, and applies the grey clustering method to the evaluation of the equipment maintenance support capability of the artillery units, and finally evaluates the equipment maintenance and support capability of the artillery brigade as an example, and analyzes the evaluation results. This paper finds out the outstanding problems existing in the maintenance and support of military equipment, and puts forward some constructive suggestions, in order to improve the status of military equipment maintenance and support and improve the level of future equipment maintenance.

29 CFR 1918.68 - Grounding.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Cargo Handling Gear and Equipment Other Than Ship's Gear... tools and battery operated tools, shall be grounded through a separate equipment conductor run with or...

29 CFR 1918.68 - Grounding.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Cargo Handling Gear and Equipment Other Than Ship's Gear... tools and battery operated tools, shall be grounded through a separate equipment conductor run with or...

Separating Decision and Encoding Noise in Signal Detection Tasks

PubMed Central

Cabrera, Carlos Alexander; Lu, Zhong-Lin; Dosher, Barbara Anne

2015-01-01

In this paper we develop an extension to the Signal Detection Theory (SDT) framework to separately estimate internal noise arising from representational and decision processes. Our approach constrains SDT models with decision noise by combining a multi-pass external noise paradigm with confidence rating responses. In a simulation study we present evidence that representation and decision noise can be separately estimated over a range of representative underlying representational and decision noise level configurations. These results also hold across a number of decision rules and show resilience to rule miss-specification. The new theoretical framework is applied to a visual detection confidence-rating task with three and five response categories. This study compliments and extends the recent efforts of researchers (Benjamin, Diaz, & Wee, 2009; Mueller & Weidemann, 2008; Rosner & Kochanski, 2009, Kellen, Klauer, & Singmann, 2012) to separate and quantify underlying sources of response variability in signal detection tasks. PMID:26120907

Structured Analysis and Structured Design for the Logistic Support Analysis (LSA) Task 303 Evaluation of Alternatives and Trade-Off Analysis, LSA Subtask 303.2.2, Trade-Off Between Support System Alternatives and System/Equipment Alternatives

DTIC Science & Technology

1991-01-01

Field 3. Training and Training Devices: a. Factory training b. Instructor and key personnel training c. New equipment training plan d. New equipment...12345678901234567990123456789012345678901234567890123456789� 1. 0016 10 SUPPOR2AILITY ALTEIIIVE TRADE-OFF ANALISIS . 4. + 4" + 4. 4. 4 2. C1.0 111.0 N2.0 1.0 INITIATE

Performance in complex motor tasks deteriorates in hyperthermic humans.

PubMed

Piil, Jacob F; Lundbye-Jensen, Jesper; Trangmar, Steven J; Nybo, Lars

2017-01-01

Heat stress, leading to elevations in whole-body temperature, has a marked impact on both physical performance and cognition in ecological settings. Lab experiments confirm this for physically demanding activities, whereas observations are inconsistent for tasks involving cognitive processing of information or decision-making prior to responding. We hypothesized that divergences could relate to task complexity and developed a protocol consisting of 1) simple motor task [TARGET_pinch], 2) complex motor task [Visuo-motor tracking], 3) simple math task [MATH_type], 4) combined motor-math task [MATH_pinch]. Furthermore, visuo-motor tracking performance was assessed both in a separate- and a multipart protocol (complex motor tasks alternating with the three other tasks). Following familiarization, each of the 10 male subjects completed separate and multipart protocols in randomized order in the heat (40°C) or control condition (20°C) with testing at baseline (seated rest) and similar seated position, following exercise-induced hyperthermia (core temperature ∼ 39.5°C in the heat and 38.2°C in control condition). All task scores were unaffected by control exercise or passive heat exposure, but visuo-motor tracking performance was reduced by 10.7 ± 6.5% following exercise-induced hyperthermia when integrated in the multipart protocol and 4.4 ± 5.7% when tested separately (both P < 0.05 ). TARGET_pinch precision declined by 2.6 ± 1.3% ( P < 0.05 ), while no significant changes were observed for the math tasks. These results indicate that heat per se has little impact on simple motor or cognitive test performance, but complex motor performance is impaired by hyperthermia and especially so when multiple tasks are combined.

Task Descriptions in Diagnostic Radiology. Research Report No. 7. Volume 3, Machine-Related, Patient Care and Administrative Tasks: What Radiologists, Technologists, Nurses and Physicists Do to Run Things and Look After Patients and Equipment.

ERIC Educational Resources Information Center

Gilpatrick, Eleanor

The third of four volumes in Research Report No. 7 of the Health Services Mobility Study (HSMS), this book contains 149 diagnostic radiologist task descriptions that cover activities in the area of nursing (patient care), film processing, quality assurance, radiation protection, machine maintenance, housekeeping, and administration at the…

RADC thermal guide for reliability engineers

NASA Astrophysics Data System (ADS)

Morrison, G. N.; Kallis, J. M.; Strattan, L. A.; Jones, I. R.; Lena, A. L.

1982-06-01

This guide was developed to provide a reliability engineer, who is not proficient in thermal design and analysis techniques, with the tools for managing and evaluating the thermal design and production of electronic equipment. It defines the requirements and tasks that should be addressed in system equipment specifications and statements of work, and describes how to evaluate performance.

30 CFR 75.902-4 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2014 CFR

2014-07-01

... SAFETY STANDARDS-UNDERGROUND COAL MINES Underground Low- and Medium-Voltage Alternating Current Circuits... from resistance grounded systems separate connections shall be used when practicable. ...

30 CFR 75.902-4 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2013 CFR

2013-07-01

... SAFETY STANDARDS-UNDERGROUND COAL MINES Underground Low- and Medium-Voltage Alternating Current Circuits... from resistance grounded systems separate connections shall be used when practicable. ...

30 CFR 75.902-4 - Attachment of ground conductors and ground check wires to equipment frames; use of separate...

Code of Federal Regulations, 2012 CFR

2012-07-01

... SAFETY STANDARDS-UNDERGROUND COAL MINES Underground Low- and Medium-Voltage Alternating Current Circuits... from resistance grounded systems separate connections shall be used when practicable. ...

Learning and transfer of category knowledge in an indirect categorization task.

PubMed

Helie, Sebastien; Ashby, F Gregory

2012-05-01

Knowledge representations acquired during category learning experiments are 'tuned' to the task goal. A useful paradigm to study category representations is indirect category learning. In the present article, we propose a new indirect categorization task called the "same"-"different" categorization task. The same-different categorization task is a regular same-different task, but the question asked to the participants is about the stimulus category membership instead of stimulus identity. Experiment 1 explores the possibility of indirectly learning rule-based and information-integration category structures using the new paradigm. The results suggest that there is little learning about the category structures resulting from an indirect categorization task unless the categories can be separated by a one-dimensional rule. Experiment 2 explores whether a category representation learned indirectly can be used in a direct classification task (and vice versa). The results suggest that previous categorical knowledge acquired during a direct classification task can be expressed in the same-different categorization task only when the categories can be separated by a rule that is easily verbalized. Implications of these results for categorization research are discussed.

Duty Module Methodology for Officer Career Management System Development: Task Data Bank, Task List.

DTIC Science & Technology

1975-11-01

and supply of communications equipment. O-G-1 0427 Prepare communications portion of unit SOP, operations orders, and plans. O-G-1 0428 Interpret...property for sale into commrercial categories. 0-FF-10 1307 Prepare formal advertising and invitations to bid and make other authorized arrangements for

Combined Task and Physical Demands Analyses towards a Comprehensive Human Work Model

DTIC Science & Technology

2014-09-01

new equipment or modifying tasks and providing training (van der Molen, Sluiter, Hulshof , Vink, & Frings-Dresen, 2005). List the Job Duties (the...00 1/SV, Defence Research and Development Canada. van der Molen, H. F., Sluiter, J. K., Hulshof , C. T. J. , Vink, P., & Frings-Dresen, M. H. W

Separateness Representations in a Sculpting Task: Revealing Maternal Subjective Experience

ERIC Educational Resources Information Center

Bat Or, Michal

2015-01-01

This study explored mothers' separateness representations via a clay sculpting task assigned to 24 mothers of preschool children aged 21 months to 4 years. Each participant created a clay sculpture of herself and her child, followed by a semi-structured interview about the sculpting experience and the meaning of the sculpture. Qualitative analyses…

Metacognition of multitasking: How well do we predict the costs of divided attention?

PubMed

Finley, Jason R; Benjamin, Aaron S; McCarley, Jason S

2014-06-01

Risky multitasking, such as texting while driving, may occur because people misestimate the costs of divided attention. In two experiments, participants performed a computerized visual-manual tracking task in which they attempted to keep a mouse cursor within a small target that moved erratically around a circular track. They then separately performed an auditory n-back task. After practicing both tasks separately, participants received feedback on their single-task tracking performance and predicted their dual-task tracking performance before finally performing the 2 tasks simultaneously. Most participants correctly predicted reductions in tracking performance under dual-task conditions, with a majority overestimating the costs of dual-tasking. However, the between-subjects correlation between predicted and actual performance decrements was near 0. This combination of results suggests that people do anticipate costs of multitasking, but have little metacognitive insight on the extent to which they are personally vulnerable to the risks of divided attention, relative to other people. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Preliminary experimental results of gas recycling subsystems except carbon dioxide concentration

NASA Technical Reports Server (NTRS)

Otsuji, K.; Sawada, T.; Satoh, S.; Kanda, S.; Matsumura, H.; Kondo, S.; Otsubo, K.

1987-01-01

Oxygen concentration and separation is an essential factor for air recycling in a controlled ecological life support system (CELSS). Furthermore, if the value of the plant assimilatory quotient is not coincident with that of the animal respiratory quotient, the recovery of oxygen from the concentrated CO2 through chemical methods will become necessary to balance the gas contents in a CELSS. Therefore, oxygen concentration and separation equipment using Salcomine and O2 recovery equipment, such as Sabatier and Bosch reactors, were experimentally developed and tested.

Human factors approach to evaluate the user interface of physiologic monitoring.

PubMed

Fidler, Richard; Bond, Raymond; Finlay, Dewar; Guldenring, Daniel; Gallagher, Anthony; Pelter, Michele; Drew, Barbara; Hu, Xiao

2015-01-01

As technology infiltrates more of our personal and professional lives, user expectations for intuitive design have driven many consumer products, while medical equipment continues to have high training requirements. Not much is known about the usability and user experience associated with hospital monitoring equipment. This pilot project aimed to better understand and describe the user interface interaction and user experience with physiologic monitoring technology. This was a prospective, descriptive, mixed-methods quality improvement project to analyze perceptions and task analyses of physiologic monitors. Following a survey of practice patterns and perceived abilities to accomplish key tasks, 10 voluntary experienced physician and nurse subjects were asked to perform a series of tasks in 7 domains of monitor operations on GE Monitoring equipment in a single institution. For each task analysis, data were collected on time to complete the task, the number of button pushes or clicks required to accomplish the task, economy of motion, and observed errors. Although 60% of the participants reported incorporating monitoring data into patient care, 80% of participants preferred to receive monitoring data at the point of care (bedside). Average perceived central station usability is 5.3 out of 10 (ten is easiest). High variability exists in monitoring station interaction performance among those participating in this project. Alarms were almost universally silenced without cognitive recognition of the alarm state. Education related to monitoring operations appeared largely absent in this sample. Most users perceived the interface to not be intuitive, complaining of multiple layers and steps for data retrieval. These clinicians report real-time monitoring helpful for abrupt changes in condition like arrhythmias; however, reviewing alarms is not prioritized as valuable due to frequent false alarms. Participants requested exporting monitoring data to electronic medical records. Much research is needed to develop best practices for display of real-time information, organization and filtering of meaningful data, and simplified ways to find information. Published by Elsevier Inc.

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 63.1042 - Standards-Separator fixed roof.

Code of Federal Regulations, 2014 CFR

2014-07-01

... interface of the roof edge and the separator wall. (3) Each opening in the fixed roof shall be equipped with... closure devices shall include: organic vapor permeability; the effects of any contact with the liquid and its vapors managed in the separator; the effects of outdoor exposure to wind, moisture, and sunlight...

40 CFR 63.1042 - Standards-Separator fixed roof.

Code of Federal Regulations, 2011 CFR

2011-07-01

... interface of the roof edge and the separator wall. (3) Each opening in the fixed roof shall be equipped with... closure devices shall include: organic vapor permeability; the effects of any contact with the liquid and its vapors managed in the separator; the effects of outdoor exposure to wind, moisture, and sunlight...

40 CFR 63.1042 - Standards-Separator fixed roof.

Code of Federal Regulations, 2012 CFR

2012-07-01

... interface of the roof edge and the separator wall. (3) Each opening in the fixed roof shall be equipped with... closure devices shall include: organic vapor permeability; the effects of any contact with the liquid and its vapors managed in the separator; the effects of outdoor exposure to wind, moisture, and sunlight...

40 CFR 63.1042 - Standards-Separator fixed roof.

Code of Federal Regulations, 2013 CFR

2013-07-01

... interface of the roof edge and the separator wall. (3) Each opening in the fixed roof shall be equipped with... closure devices shall include: organic vapor permeability; the effects of any contact with the liquid and its vapors managed in the separator; the effects of outdoor exposure to wind, moisture, and sunlight...

Membrane-augmented cryogenic methane/nitrogen separation

DOEpatents

Lokhandwala, Kaaeid

1997-01-01

A membrane separation process combined with a cryogenic separation process for treating a gas stream containing methane, nitrogen and at least one other component. The membrane separation process works by preferentially permeating methane and the other component and rejecting nitrogen. The process is particularly useful in removing components such as water, carbon dioxide or C.sub.3+ hydrocarbons that might otherwise freeze and plug the cryogenic equipment.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Minton-Summers, S.; Ray, C. D.

1996-01-01

A summary of work accomplished under Technical Task Agreement by the Marshall Space Flight Center (MSFC) documents activities regarding the Environmental Control and Life Support Systems (ECLSS) of the International Space Station (ISS) program. These MSFC activities were in-line to the designing, the development, the testing, and the flight of ECLSS equipment. MSFC's unique capabilities for performing integrated system testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs are the basis for the Technical Task Agreement activities. Tasks were completed in the Water Recovery Systems, Air Revitalization Systems, and microbiology areas. The results of each task is described in this summary report.

Dizocilpine (MK-801) impairs learning in the active place avoidance task but has no effect on the performance during task/context alternation.

PubMed

Vojtechova, Iveta; Petrasek, Tomas; Hatalova, Hana; Pistikova, Adela; Vales, Karel; Stuchlik, Ales

2016-05-15

The prevention of engram interference, pattern separation, flexibility, cognitive coordination and spatial navigation are usually studied separately at the behavioral level. Impairment in executive functions is often observed in patients suffering from schizophrenia. We have designed a protocol for assessing these functions all together as behavioral separation. This protocol is based on alternated or sequential training in two tasks testing different hippocampal functions (the Morris water maze and active place avoidance), and alternated or sequential training in two similar environments of the active place avoidance task. In Experiment 1, we tested, in adult rats, whether the performance in two different spatial tasks was affected by their order in sequential learning, or by their day-to-day alternation. In Experiment 2, rats learned to solve the active place avoidance task in two environments either alternately or sequentially. We found that rats are able to acquire both tasks and to discriminate both similar contexts without obvious problems regardless of the order or the alternation. We used two groups of rats, controls and a rat model of psychosis induced by a subchronic intraperitoneal application of 0.08mg/kg of dizocilpine (MK-801), a non-competitive antagonist of NMDA receptors. Dizocilpine had no selective effect on parallel/sequential learning of tasks/contexts. However, it caused hyperlocomotion and a significant deficit in learning in the active place avoidance task regardless of the task alternation. Cognitive coordination tested by this task is probably more sensitive to dizocilpine than spatial orientation because no hyperactivity or learning impairment was observed in the Morris water maze. Copyright © 2016 Elsevier B.V. All rights reserved.

Recent progress of task-specific ionic liquids in chiral resolution and extraction of biological samples and metal ions.

PubMed

Wu, Datong; Cai, Pengfei; Zhao, Xiaoyong; Kong, Yong; Pan, Yuanjiang

2018-01-01

Ionic liquids have been functionalized for modern applications. The functional ionic liquids are also called task-specific ionic liquids. Various task-specific ionic liquids with certain groups have been constructed and exploited widely in the field of separation. To take advantage of their properties in separation science, task-specific ionic liquids are generally used in techniques such as liquid-liquid extraction, solid-phase extraction, gas chromatography, high-performance liquid chromatography, and capillary electrophoresis. This review mainly covers original research papers published in the last five years, and we will focus on task-specific ionic liquids as the chiral selectors in chiral resolution and as extractant or sensor for biological samples and metal ion purification. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Development of a frequency-separated knob with variable change rates by rotation speed.

PubMed

Kim, Huhn; Ham, Dong-Han

2014-11-01

The principle of frequency separation is a design method to display different information or feedback in accordance with the frequency of interaction between users and systems. This principle can be usefully applied to the design of knobs. Particularly, their rotation speed can be a meaningful criterion for applying the principle. Hence a knob can be developed, which shows change rates varying depending on its rotation speed. Such a knob would be more efficient than conventional knobs with constant change rate. We developed a prototype of frequency-separated knobs that has different combinations of the number of rotation speed steps and the size of the variation of change rate. With this prototype, we conducted an experiment to examine whether a speed frequency-separated knob enhances users' task performance. The results showed that the newly designed knob was effective in enhancing task performance, and that task efficiency was the best when its change rate increases exponentially and its rotation speed has three steps. We conducted another experiment to investigate how a more rapid exponential increase of change rate and a more number of steps of rotation speed influence users' task performance. The results showed that merely increasing both the size of the variation of change rates and the number of speed steps did not result in better task performance. Although two experimental results cannot easily be generalized to other contexts, they still offer practical information useful for designing a speed frequency-separated knob in various consumer electronics and control panels of industrial systems. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

40 CFR 86.1232-96 - Vehicle preconditioning.

Code of Federal Regulations, 2011 CFR

2011-07-01

... preconditioned separately. If production evaporative canisters are equipped with a functional service port... production evaporative canisters are equipped with a functional service port designed for vapor load or purge... provides at least a 4:1 safety factor against the lean flammability limit. (iii) The FID hydrocarbon...

40 CFR 63.7957 - What definitions apply to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... equipment used recovering, removing, oxidizing, or destroying organic vapors. Examples of such equipment... point means an individual tank, surface impoundment, container, oil-water, organic-water separator..., captures organic vapors emitted from the tank or container, and vents the captured vapor through a closed...

40 CFR 63.7957 - What definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... equipment used recovering, removing, oxidizing, or destroying organic vapors. Examples of such equipment... point means an individual tank, surface impoundment, container, oil-water, organic-water separator..., captures organic vapors emitted from the tank or container, and vents the captured vapor through a closed...

40 CFR 63.7957 - What definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... equipment used recovering, removing, oxidizing, or destroying organic vapors. Examples of such equipment... point means an individual tank, surface impoundment, container, oil-water, organic-water separator..., captures organic vapors emitted from the tank or container, and vents the captured vapor through a closed...

Energy Efficiency Upgrades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roby Williams

2012-03-29

The energy efficiency upgrades project at Hardin County General Hospital did not include research nor was it a demonstration project. The project enabled the hospital to replace outdated systems with modern efficient models. Hardin County General Hospital is a 501c3, nonprofit hospital and the sole community provider for Hardin and Pope Counties of Illinois. This project provided much needed equipment and facility upgrades that would not have been possible through locally generated funding. Task 1 was a reroofing of the hospital. The hospital architect designed the replacement to increase the energy efficiency of the hospital roof/ceiling structure. Task 2 wasmore » replacement and installation of a new more efficient CT scanner for the hospital. Included in the project was replacement of HVAC equipment for the entire radiological suite. Task 5 was a replacement and installation of a new higher capacity diesel-fueled emergency generator for the hospital replacing a 50+ year old gas-fired generator. Task 7 was the replacement of 50+ year-old walk-in cooler/freezer with a newer, energy efficient model. Task 8 was the replacement of 10+ year-old washing machines in the hospital laundry with higher capacity, energy efficient models. Task 9 was replacement of 50-year old single pane curtain window system with double-pane insulated windows. Additionally, insulation was added around ventilation systems and the curtain wall system.« less

Recommended minimal emergency equipment and resources for schools: national consensus group report.

PubMed

Bobo, Nichole; Hallenbeck, Paula; Robinson, Judith

2003-06-01

Providing an environment that is responsive to emergency health needs of students is essential to creating a safe setting for children in schools. The question of what minimal essential emergency equipment and resources should be available in schools brings with it many and varied opinions, issues, and concerns. Through funding from the Emergency Medical Services for Children (EMSC), the National Association of School Nurses (NASN) was charged with the task of convening a consensus group to formulate a recommended list of minimal essential emergency equipment and resources that should be present in all schools. This article provides an overview of the issues surrounding minimal emergency equipment needs for schools, presents recommended minimal emergency equipment and resources, and recommendations for further actions.

Development of augmented reality system for servicing electromechanical equipment

NASA Astrophysics Data System (ADS)

Zhukovskiy, Y.; Koteleva, N.

2018-05-01

Electromechanical equipment is widely used. It is used in industrial enterprises, in the spheres of public services, in everyday life, etc. Maintenance servicing of electromechanical equipment is an important part of its life cycle. High-quality and timely service can extend the life of the electromechanical equipment. The creation of special systems that simplify the process of servicing electromechanical equipment is an urgent task. Such systems can shorten the time for maintenance of electrical equipment, and, therefore, reduce the cost of maintenance in general. This article presents an analysis of information on the operation of service services for maintenance and repair of electromechanical equipment, identifies the list of services, and estimates the time required to perform basic service operations. The structure of the augmented reality system is presented, the ways of interaction of the augmented reality system with the automated control systems working at the enterprise are presented.

Daily Access to Sucrose Impairs Aspects of Spatial Memory Tasks Reliant on Pattern Separation and Neural Proliferation in Rats

ERIC Educational Resources Information Center

Reichelt, Amy C.; Morris, Margaret J.; Westbrook, Reginald Frederick

2016-01-01

High sugar diets reduce hippocampal neurogenesis, which is required for minimizing interference between memories, a process that involves "pattern separation." We provided rats with 2 h daily access to a sucrose solution for 28 d and assessed their performance on a spatial memory task. Sucrose consuming rats discriminated between objects…

OPERATING, REPAIRING, AND MAINTAINING SMALL POWER EQUIPMENT. HORTICULTURE-SERVICE OCCUPATIONS, MODULE NO. 10.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO PREPARE HIGH SCHOOL STUDENTS FOR HORTICULTURE SERVICE OCCUPATIONS, THIS MODULE HAS AS ITS MAJOR OBJECTIVE TO DEVELOP A PROFICIENCY IN THE OPERATION, MAINTENANCE, AND REPAIR OF SMALL POWER EQUIPMENT USED IN HORTICULTURAL ENTERPRISES. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES.…

Space shuttle EVA/IVA support equipment requirements study. Volume 1: Final summary report

NASA Technical Reports Server (NTRS)

1973-01-01

A study was conducted to determine the support equipment requirements for space shuttle intravehicular and extravehicular activities. The subjects investigated are; (1) EVA/IVA task identification and analysis,. (2) primary life support system, (3) emergency life support system, (4) pressure suit assembly, (5) restraints, (6) work site provision, (7) emergency internal vehicular emergencies, and (8) vehicular interfaces.

Correlation of near-infrared spectroscopy and transcranial magnetic stimulation of the motor cortex in overt reading and musical tasks.

PubMed

Lo, Y L; Zhang, H H; Wang, C C; Chin, Z Y; Fook-Chong, S; Gabriel, C; Guan, C T

2009-01-01

In overt reading and singing tasks, actual vocalization of words in a rhythmic fashion is performed. During execution of these tasks, the role of underlying vascular processes in relation to cortical excitability changes in a spatial manner is uncertain. Our objective was to investigate cortical excitability changes during reading and singing with transcranial magnetic stimulation (TMS), as well as vascular changes with nearinfrared spectroscopy (NIRS). Findings with TMS and NIRS were correlated. TMS and NIRS recordings were performed in 5 normal subjects while they performed reading and singing tasks separately. TMS was applied over the left motor cortex at 9 positions 2.5 cm apart. NIRS recordings were made over these identical positions. Although both TMS and NIRS showed significant mean cortical excitability and hemodynamic changes from baseline during vocalization tasks, there was no significant spatial correlation of these changes evaluated with the 2 techniques over the left motor cortex. Our findings suggest that increased left-sided cortical excitability from overt vocalization tasks in the corresponding "hand area" were the result of "functional connectivity," rather than an underlying "vascular overflow mechanism" from the adjacent speech processing or face/mouth areas. Our findings also imply that functional neurophysiological and vascular methods may evaluate separate underlying processes, although subjects performed identical vocalization tasks. Future research combining similar methodologies should embrace this aspect and harness their separate capabilities.

Designing and Implementing an "Intelligent" Multimedia Tutoring System for Repair Tasks: Final Report.

ERIC Educational Resources Information Center

Baggett, Patricia

1989-01-01

The first part of this document is the final report of a research project (1984-1989) on designing and implementing an intelligent multimedia tutoring system for repair tasks. The problem/goal and approach, equipment and implementation, experimental work, and results are discussed for three phases of research: (1) developing and testing an…

30 CFR 48.7 - Training of miners assigned to a task in which they have had no previous experience; minimum...

Code of Federal Regulations, 2014 CFR

2014-07-01

... to new work tasks as mobile equipment operators, drilling machine operators, haulage and conveyor systems operators, roof and ground control machine operators, and those in blasting operations shall not... duties at times or places where production is not the primary objective; on (ii) Supervised operation...

30 CFR 48.7 - Training of miners assigned to a task in which they have had no previous experience; minimum...

Code of Federal Regulations, 2012 CFR

2012-07-01

... to new work tasks as mobile equipment operators, drilling machine operators, haulage and conveyor systems operators, roof and ground control machine operators, and those in blasting operations shall not... duties at times or places where production is not the primary objective; on (ii) Supervised operation...

30 CFR 48.7 - Training of miners assigned to a task in which they have had no previous experience; minimum...

Code of Federal Regulations, 2011 CFR

2011-07-01

... to new work tasks as mobile equipment operators, drilling machine operators, haulage and conveyor systems operators, roof and ground control machine operators, and those in blasting operations shall not... duties at times or places where production is not the primary objective; on (ii) Supervised operation...

30 CFR 48.7 - Training of miners assigned to a task in which they have had no previous experience; minimum...

Code of Federal Regulations, 2013 CFR

2013-07-01

... to new work tasks as mobile equipment operators, drilling machine operators, haulage and conveyor systems operators, roof and ground control machine operators, and those in blasting operations shall not... duties at times or places where production is not the primary objective; on (ii) Supervised operation...

How Are Task Reflexivity and Intercultural Sensitivity Related to the Academic Performance of MBA Students?

ERIC Educational Resources Information Center

Lyubovnikova, Joanne; Napiersky, Uwe; Vlachopoulos, Panos

2015-01-01

Higher education in business school environments is increasingly focused on how to best equip students with the skills necessary for leadership in the global workplace. This paper examines the impact of two particularly important cognitive capabilities--task reflexivity and intercultural sensitivity, on academic performance in an MBA programme. It…

The Baltimore Therapeutic Equipment work simulator: biomechanical and physiological norms for three attachments in healthy men.

PubMed

Bhambhani, Y; Esmail, S; Brintnell, S

1994-01-01

The Baltimore Therapeutic Equipment (BTE) work simulator is routinely used by occupational therapists in functional capacity evaluation. Currently, there is a lack of normative data for various attachments on this instrument. The purposes of this study were to (a) establish norms for the biomechanical and physiological responses during three tasks on the BTE work simulator, namely, wheel-turn, push-pull, and overhead-reach; (b) compare these responses during the three tasks, and (c) examine the interrelationships of these responses during the tasks. Twenty healthy men completed five testing sessions: (a) task familiarization on the BTE work simulator to identify the work intensity, which was perceived as hard on the Borg scale; (b) an incremental arm ergometer exercise test to determine their peak oxygen uptake (pVO2) and peak heart rate (pHR); and (c) one of the three tasks on the BTE work simulator for 4 min in each of the next three sessions. Analysis of variance indicated that torque, work, and power during the overhead-reach were significantly higher (p = .000) compared with the wheel-turn and push-pull tasks. However, no significant differences (p > .05) were observed among the tasks for the VO2 and HR, which were approximately 50% and 70% of pVO2 and pHR respectively. Although there was a significant relationship (p < .05) among tasks for the torque, work, and power, the common variance ranged only between 38% and 67%. The relative pVO2 was significantly related to work (p = .028) and power (p = .027) only during the push-pull task but not the wheel-turn and overhead-reach tasks. These results suggest that occupational therapists should include as many tasks as possible when designing functional capacity evaluation test batteries, and that there is no consistent relationship between cardiorespiratory fitness and performance of various tasks on the BTE work simulator.

TANKS 18 AND 19-F EQUIPMENT GROUT FILL MATERIAL EVALUATION AND RECOMMENDATIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stefanko, D.; Langton, C.

The United States Department of Energy (US DOE) intends to remove Tanks 18-F and 19-F at the Savannah River Site (SRS) from service. The high-level waste (HLW) tanks have been isolated from the F-area Tank Farm (FTF) facilities and will be filled with cementitious grout for the purpose of: (1) physically stabilizing the empty volumes in the tanks, (2) limiting/eliminating vertical pathways from the surface to residual waste on the bottom of the tanks, (3) providing an intruder barrier, and (4) providing an alkaline, chemical reducing environment within the closure boundary to limit solubility of residual radionuclides. Bulk waste andmore » heel waste removal equipment will remain in Tanks 18-F and 19-F when the tanks are closed. This equipment includes: mixer pumps, transfer pumps, transfer jets, equipment support masts, sampling masts and dip tube assemblies. The current Tank 18-F and 19-F closure strategy is to grout the internal void spaces in this equipment to eliminate fast vertical pathways and slow water infiltration to the residual material on the tank floor. This report documents the results of laboratory testing performed to identify a grout formulation for filling the abandoned equipment in Tanks 18-F and 19-F. The objective of this work was to formulate a flowable grout for filling internal voids of equipment that will remain in Tanks 18-F and 19-F during the final closures. This work was requested by V. A. Chander, Tank Farm Closure Engineering, in HLW-TTR-2011-008. The scope for this task is provided in the Task Technical and Quality Assurance Plan (TTQAP), SRNL-RP-2011-00587. The specific objectives of this task were to: (1) Prepare and evaluate the SRR cooling coil grout identified in WSRC-STI-2008-00298 per the TTR for this work. The cooling coil grout is a mixture of BASF MasterFlow{reg_sign} 816 cable grout (67.67 wt. %), Grade 100 ground granulated blast furnace slag (7.52 wt. %) and water (24.81 wt. %); (2) Identify equipment grout placement and performance properties; (3) Design up to 2 additional grout systems for filling the Tank 18-F and Tank 19-F equipment; (4) Prepare samples of candidate grouts and measure fresh properties, thermal properties and cured properties; (5) Recommend a grout for the Tier 1A equipment fill mock up - ADMP 4 foot high mock up, 1 inch and 2 inch pipes; (6) Support procurement of materials for the Tier 1A equipment fill mock up test; (7) Prepare samples of the recommended grout for hydraulic property measurements which can be used for comparison to values used in the F- Tank Farm Performance Assessment (PA); and (8) Document equipment fill grout data and recommendations in a report.« less

47 CFR 36.125 - Local switching equipment-Category 3.

Code of Federal Regulations, 2010 CFR

2010-10-01

... electronic analog or digital remote line locations. Equipment used for the identification, recording and... which has a common intermediate distributing frame, market group or other separately identifiable... composed of an electronic analog or digital host office and all of its remote locations. A host/remote...

An economic analysis of adherence engineering to improve use of best practices during central line maintenance procedures.

PubMed

Nelson, Richard E; Angelovic, Aaron W; Nelson, Scott D; Gleed, Jeremy R; Drews, Frank A

2015-05-01

Adherence engineering applies human factors principles to examine non-adherence within a specific task and to guide the development of materials or equipment to increase protocol adherence and reduce human error. Central line maintenance (CLM) for intensive care unit (ICU) patients is a task through which error or non-adherence to protocols can cause central line-associated bloodstream infections (CLABSIs). We conducted an economic analysis of an adherence engineering CLM kit designed to improve the CLM task and reduce the risk of CLABSI. We constructed a Markov model to compare the cost-effectiveness of the CLM kit, which contains each of the 27 items necessary for performing the CLM procedure, compared with the standard care procedure for CLM, in which each item for dressing maintenance is gathered separately. We estimated the model using the cost of CLABSI overall ($45,685) as well as the excess LOS (6.9 excess ICU days, 3.5 excess general ward days). Assuming the CLM kit reduces the risk of CLABSI by 100% and 50%, this strategy was less costly (cost savings between $306 and $860) and more effective (between 0.05 and 0.13 more quality-adjusted life-years) compared with not using the pre-packaged kit. We identified threshold values for the effectiveness of the kit in reducing CLABSI for which the kit strategy was no longer less costly. An adherence engineering-based intervention to streamline the CLM process can improve patient outcomes and lower costs. Patient safety can be improved by adopting new approaches that are based on human factors principles.

Membrane-augmented cryogenic methane/nitrogen separation

DOEpatents

Lokhandwala, K.

1997-07-15

A membrane separation process is described which is combined with a cryogenic separation process for treating a gas stream containing methane, nitrogen and at least one other component. The membrane separation process works by preferentially permeating methane and the other component and rejecting nitrogen. The process is particularly useful in removing components such as water, carbon dioxide or C{sub +2} hydrocarbons that might otherwise freeze and plug the cryogenic equipment. 10 figs.

40 CFR 60.693-2 - Alternative standards for oil-water separators.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-water separators. (a) An owner or operator may elect to construct and operate a floating roof on an oil... requirements of this subpart which meets the following specifications. (1) Each floating roof shall be equipped... the liquid between the wall of the separator and the floating roof. A mechanical shoe seal means a...

Additional helmet and pack loading reduce situational awareness during the establishment of marksmanship posture.

PubMed

Lim, Jongil; Palmer, Christopher J; Busa, Michael A; Amado, Avelino; Rosado, Luis D; Ducharme, Scott W; Simon, Darnell; Van Emmerik, Richard E A

2017-06-01

The pickup of visual information is critical for controlling movement and maintaining situational awareness in dangerous situations. Altered coordination while wearing protective equipment may impact the likelihood of injury or death. This investigation examined the consequences of load magnitude and distribution on situational awareness, segmental coordination and head gaze in several protective equipment ensembles. Twelve soldiers stepped down onto force plates and were instructed to quickly and accurately identify visual information while establishing marksmanship posture in protective equipment. Time to discriminate visual information was extended when additional pack and helmet loads were added, with the small increase in helmet load having the largest effect. Greater head-leading and in-phase trunk-head coordination were found with lighter pack loads, while trunk-leading coordination increased and head gaze dynamics were more disrupted in heavier pack loads. Additional armour load in the vest had no consequences for Time to discriminate, coordination or head dynamics. This suggests that the addition of head borne load be carefully considered when integrating new technology and that up-armouring does not necessarily have negative consequences for marksmanship performance. Practitioner Summary: Understanding the trade-space between protection and reductions in task performance continue to challenge those developing personal protective equipment. These methods provide an approach that can help optimise equipment design and loading techniques by quantifying changes in task performance and the emergent coordination dynamics that underlie that performance.

Training Impact Analysis for Land Warrior Block II

DTIC Science & Technology

2006-01-01

maximum W... ... 384 384 instructor requirement - S~ Infantry OSUT STraining company size (25 training companies) NA NA 200•:• LW systems to equip all...Grenade, NA NA 10 M 18 Green SMK C-111 TACTICAL Low Expertise Medium Expertise High Expertise EMPLOYMENT Tasks/Skills Taught No Task Number...Practical Exercise of Tactical Employment on LW Capabilities (Leader Task) G945 Hand Grenade, NA NA 10 M18 Yellow SMK G950 Hand Grenade, NA NA 3 M18 Red SMK

Sci—Fri PM: Topics — 03: The Global Task Force on Radiotherapy for Cancer Control: Core Investments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Dyk, J.; Jaffray, D. A.; MacPherson, M. S.

The Union for International Cancer Control (UICC) is a membership-based, non-governmental organization with a mandate to “…to unite the cancer community to reduce the global cancer burden, to promote greater equity, and to integrate cancer control into the world health and development agenda.” COMP is an associate member of the UICC. It is well recognized by the UICC that there are major gaps between high, and low and middle income countries, in terms of access to cancer services including access to radiation therapy. In this context, the UICC has developed a Global Task Force on Radiotherapy for Cancer Control withmore » a charge to answer a single question: “What does it cost to close the gap between what exists today and reasonable access to radiotherapy globally?” The Task Force consists of leaders internationally recognized for their radiation treatment related expertise (radiation oncologists, medical physicists, radiation therapists) as well as those with global health and economics specialization. The Task Force has developed three working groups: (1) to look at the global burden of cancer; (2) to look at the infrastructure requirements (facilities, equipment, personnel); and (3) to consider outcomes in terms of numbers of lives saved and palliated patients. A report is due at the World Cancer Congress in December 2014. This presentation reviews the infrastructure considerations under analysis by the second work group. The infrastructure parameters being addressed include capital costs of buildings and equipment and operating costs, which include human resources, equipment servicing and quality control, and general overhead.« less

High energy physics at UC Riverside

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-07-01

This report discusses progress made for the following two tasks: experimental high energy physics, Task A, and theoretical high energy physics, Task B. Task A1 covers hadron collider physics. Information for Task A1 includes: personnel/talks/publications; D0: proton-antiproton interactions at 2 TeV; SDC: proton-proton interactions at 40 TeV; computing facilities; equipment needs; and budget notes. The physics program of Task A2 has been the systematic study of leptons and hadrons. Information covered for Task A2 includes: personnel/talks/publications; OPAL at LEP; OPAL at LEP200; CMS at LHC; the RD5 experiment; LSND at LAMPF; and budget notes. The research activities of the Theorymore » Group are briefly discussed and a list of completed or published papers for this period is given.« less

Task Satisfaction and Interpersonal Cohesiveness Among Laterally Divided Command Teams.

ERIC Educational Resources Information Center

Krieger, William G.

Ninety-six males participated in four-man teams involved in a complex decision making task. Subteams with differing functions but equal rank were established. Subteams either were or were not physically separated during the tasks. Group cohesiveness was not effected, but subteam task satisfaction differences were greatest when subteams remained…

76 FR 58165 - Petitions for Rulemaking Submitted by the Natural Resources Defense Council, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

...-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident'' (Fukushima Task Force Report... the Fukushima Task Force Report for the purpose of providing the Commission with fully-informed... recommendations from the Fukushima Task Force Report, and is not providing a separate opportunity for public...

Aging and Concurrent Task Performance: Cognitive Demand and Motor Control

ERIC Educational Resources Information Center

Albinet, Cedric; Tomporowski, Phillip D.; Beasman, Kathryn

2006-01-01

A motor task that requires fine control of upper limb movements and a cognitive task that requires executive processing--first performing them separately and then concurrently--was performed by 18 young and 18 older adults. The motor task required participants to tap alternatively on two targets, the sizes of which varied systematically. The…

Equipment of the binary-cycle geothermal power unit at the Pauzhet geothermal power station

NASA Astrophysics Data System (ADS)

Tomarov, G. V.; Nikol'skii, A. I.; Semenov, V. N.; Shipkov, A. A.

2014-06-01

The equipment of and technological processes in the pilot industrial model of the domestically produced binary-cycle geothermal power unit operating on the discharge separate at the Pauzhet geothermal power station are considered. The development principles, the design and operational features, and the data on selecting the metal in manufacturing the main equipment of the 2.5-MW binary power unit of the geothermal power station are described.

46 CFR 154.1735 - Methyl acetylene-propadiene mixture.

Code of Federal Regulations, 2011 CFR

2011-10-01

... mixture must have a refrigeration system without vapor compression or have a refrigeration system with the... separate cargo piping, vent piping, and refrigeration equipment for methyl acetylene-propadiene that are segregated from other cargo piping, vent piping and refrigeration equipment on the vessel. [CGD 74-289, 44 FR...

46 CFR 154.1735 - Methyl acetylene-propadiene mixture.

Code of Federal Regulations, 2014 CFR

2014-10-01

... mixture must have a refrigeration system without vapor compression or have a refrigeration system with the... separate cargo piping, vent piping, and refrigeration equipment for methyl acetylene-propadiene that are segregated from other cargo piping, vent piping and refrigeration equipment on the vessel. [CGD 74-289, 44 FR...

46 CFR 154.1735 - Methyl acetylene-propadiene mixture.

Code of Federal Regulations, 2013 CFR

2013-10-01

... mixture must have a refrigeration system without vapor compression or have a refrigeration system with the... separate cargo piping, vent piping, and refrigeration equipment for methyl acetylene-propadiene that are segregated from other cargo piping, vent piping and refrigeration equipment on the vessel. [CGD 74-289, 44 FR...

46 CFR 154.1735 - Methyl acetylene-propadiene mixture.

Code of Federal Regulations, 2012 CFR

2012-10-01

... mixture must have a refrigeration system without vapor compression or have a refrigeration system with the... separate cargo piping, vent piping, and refrigeration equipment for methyl acetylene-propadiene that are segregated from other cargo piping, vent piping and refrigeration equipment on the vessel. [CGD 74-289, 44 FR...

46 CFR 154.1735 - Methyl acetylene-propadiene mixture.

Code of Federal Regulations, 2010 CFR

2010-10-01

... mixture must have a refrigeration system without vapor compression or have a refrigeration system with the... separate cargo piping, vent piping, and refrigeration equipment for methyl acetylene-propadiene that are segregated from other cargo piping, vent piping and refrigeration equipment on the vessel. [CGD 74-289, 44 FR...

Development and evaluation of a radar air traffic control research task.

DOT National Transportation Integrated Search

1965-12-01

A system is described in which various elements of the radar air traffic controller's task can be presented repeatedly, reliably, and concurrently to each of six experimental subjects seated at separate task consoles. Programming of display condition...

Productivity, or quality of work as the decisive factor in marketing ergonomics? Design considerations for a new ergonomic welding-table.

PubMed

van der Veen, F; Regensburg, R E

1990-04-01

Quality tools should be designed from the starting point of adjusting tasks and equipment to human possibilities and limitations. Companies should consider an investment in ergonomic equipment as a profitable addition to indispensable productive machinery. As an example to support this statement, the authors describe the health risks of welders and the possible solutions. As the result of investigations a list of requirements was drafted for a product that would have less of the disadvantages of the products mentioned. The designed product, the 'ergonomic welding-table', aims to be a quality tool for welders working at small and medium-sized tasks. The product consists of a cabin (2.35 m wide) with a built-in ventilator for very efficient welding-fume extraction (90%-95%). Welders can set their preferred working height at any time. Another advantage is the option of performing the welding task while standing or sitting. The results of user-evaluation among welders and purchasers indicates considerable satisfaction.

Approaching neuropsychological tasks through adaptive neurorobots

NASA Astrophysics Data System (ADS)

Gigliotta, Onofrio; Bartolomeo, Paolo; Miglino, Orazio

2015-04-01

Neuropsychological phenomena have been modelized mainly, by the mainstream approach, by attempting to reproduce their neural substrate whereas sensory-motor contingencies have attracted less attention. In this work, we introduce a simulator based on the evolutionary robotics platform Evorobot* in order to setting up in silico neuropsychological tasks. Moreover, in this study we trained artificial embodied neurorobotic agents equipped with a pan/tilt camera, provided with different neural and motor capabilities, to solve a well-known neuropsychological test: the cancellation task in which an individual is asked to cancel target stimuli surrounded by distractors. Results showed that embodied agents provided with additional motor capabilities (a zooming/attentional actuator) outperformed simple pan/tilt agents, even those equipped with more complex neural controllers and that the zooming ability is exploited to correctly categorising presented stimuli. We conclude that since the sole neural computational power cannot explain the (artificial) cognition which emerged throughout the adaptive process, such kind of modelling approach can be fruitful in neuropsychological modelling where the importance of having a body is often neglected.

Basic principles of maximizing dental office productivity.

PubMed

Mamoun, John

2012-01-01

To maximize office productivity, dentists should focus on performing tasks that only they can perform and not spend office hours performing tasks that can be delegated to non-dentist personnel. An important element of maximizing productivity is to arrange the schedule so that multiple patients are seated simultaneously in different operatories. Doing so allows the dentist to work on one patient in one operatory without needing to wait for local anesthetic to take effect on another patient in another operatory, or for assistants to perform tasks (such as cleaning up, taking radiographs, performing prophylaxis, or transporting and preparing equipment and supplies) in other operatories. Another way to improve productivity is to structure procedures so that fewer steps are needed to set up and implement them. In addition, during procedures, four-handed dental passing methods can be used to provide the dentist with supplies or equipment when needed. This article reviews basic principles of maximizing dental office productivity, based on the author's observations of business logistics used by various dental offices.

Poorer divided attention in children born very preterm can be explained by difficulty with each component task, not the executive requirement to dual-task.

PubMed

Delane, Louise; Campbell, Catherine; Bayliss, Donna M; Reid, Corinne; Stephens, Amelia; French, Noel; Anderson, Mike

2017-07-01

Children born very preterm (VP, ≤ 32 weeks) exhibit poor performance on tasks of executive functioning. However, it is largely unknown whether this reflects the cumulative impact of non-executive deficits or a separable impairment in executive-level abilities. A dual-task paradigm was used in the current study to differentiate the executive processes involved in performing two simple attention tasks simultaneously. The executive-level contribution to performance was indexed by the within-subject cost incurred to single-task performance under dual-task conditions, termed dual-task cost. The participants included 77 VP children (mean age: 7.17 years) and 74 peer controls (mean age: 7.16 years) who completed Sky Search (selective attention), Score (sustained attention) and Sky Search DT (divided attention) from the Test of Everyday Attention for Children. The divided-attention task requires the simultaneous performance of the selective- and sustained-attention tasks. The VP group exhibited poorer performance on the selective- and divided-attention tasks, and showed a strong trend toward poorer performance on the sustained-attention task. However, there were no significant group differences in dual-task cost. These results suggest a cumulative impact of vulnerable lower-level cognitive processes on dual-tasking or divided attention in VP children, and fail to support the hypothesis that VP children show a separable impairment in executive-level abilities.

Pitch ranking, electrode discrimination, and physiological spread of excitation using current steering in cochlear implants

PubMed Central

Goehring, Jenny L.; Neff, Donna L.; Baudhuin, Jacquelyn L.; Hughes, Michelle L.

2014-01-01

The first objective of this study was to determine whether adaptive pitch-ranking and electrode-discrimination tasks with cochlear-implant (CI) recipients produce similar results for perceiving intermediate “virtual-channel” pitch percepts using current steering. Previous studies have not examined both behavioral tasks in the same subjects with current steering. A second objective was to determine whether a physiological metric of spatial separation using the electrically evoked compound action potential spread-of-excitation (ECAP SOE) function could predict performance in the behavioral tasks. The metric was the separation index (Σ), defined as the difference in normalized amplitudes between two adjacent ECAP SOE functions, summed across all masker electrodes. Eleven CII or 90 K Advanced Bionics (Valencia, CA) recipients were tested using pairs of electrodes from the basal, middle, and apical portions of the electrode array. The behavioral results, expressed as d′, showed no significant differences across tasks. There was also no significant effect of electrode region for either task. ECAP Σ was not significantly correlated with pitch ranking or electrode discrimination for any of the electrode regions. Therefore, the ECAP separation index is not sensitive enough to predict perceptual resolution of virtual channels. PMID:25480063

Crane and Hoisting Equipment Operator Boom Truck Operator: Apprenticeship Course Outline. Apprenticeship and Industry Training. 34-305.2

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2005

2005-01-01

The graduate of the Crane and Hoisting Equipment Operator Boom Truck Operator apprenticeship program is a certified journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) correctly use and care for tools and materials which are required to carry out the normal service and maintenance of the machines…

Mechanisms underlying transfer of task-defined rules across feature dimensions.

PubMed

Baroni, Giulia; Yamaguchi, Motonori; Chen, Jing; Proctor, Robert W

2013-01-01

The Simon effect can be reversed, favoring spatially noncorresponding responses, when people respond to stimulus colors (e.g., green) by pressing a key labeled with the alternative color (i.e., red). This Hedge and Marsh reversal is most often attributed to transfer of logical recoding rules from the color dimension to the location dimension. A recent study showed that this transfer of logical recoding rules can occur not only within a single task but also across two separate tasks that are intermixed. The present study investigated the conditions that determine the transfer of logical recoding rules across tasks. Experiment 1 examined whether it occurs in a transfer paradigm, that is when the two tasks are performed separately, but provided little support for this possibility. Experiment 2 investigated the role of task-set readiness, using a mixed-task paradigm with a predictable trials sequence, which indicated that there is no transfer of task-defined rules across tasks even when they are highly active during the Simon task. Finally, Experiments 3 and 4 used a mixed-task paradigm, where trials of the two tasks were mixed randomly and unpredictably, and manipulated the amount of feature overlap between tasks. Results indicated that task similarity is a determining factor for transfer of task-defined rules to occur. Overall, the study provides evidence that transfer of logical recoding rules tends to occur across two tasks when tasks are unpredictably intermixed and use stimuli that are highly similar and confusable.

DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR DWPF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krementz, D.; Coughlin, Jeffrey

2009-05-05

The Defense Waste Processing Facility (DWPF) requested the Savannah River National Laboratory (SRNL) to develop tooling and equipment to remotely replace gaskets in mechanical Hanford connectors to reduce personnel radiation exposure as compared to the current hands-on method. It is also expected that radiation levels will continually increase with future waste streams. The equipment is operated in the Remote Equipment Decontamination Cell (REDC), which is equipped with compressed air, two master-slave manipulators (MSM's) and an electro-mechanical manipulator (EMM) arm for operation of the remote tools. The REDC does not provide access to electrical power, so the equipment must be manuallymore » or pneumatically operated. The MSM's have a load limit at full extension of ten pounds, which limited the weight of the installation tool. In order to remotely replace Hanford connector gaskets several operations must be performed remotely, these include: removal of the spent gasket and retaining ring (retaining ring is also called snap ring), loading the new snap ring and gasket into the installation tool and installation of the new gasket into the Hanford connector. SRNL developed and tested tools that successfully perform all of the necessary tasks. Removal of snap rings from horizontal and vertical connectors is performed by separate air actuated retaining ring removal tools and is manipulated in the cell by the MSM. In order install a new gasket, the snap ring loader is used to load a new snap ring into a groove in the gasket installation tool. A new gasket is placed on the installation tool and retained by custom springs. An MSM lifts the installation tool and presses the mounted gasket against the connector block. Once the installation tool is in position, the gasket and snap ring are installed onto the connector by pneumatic actuation. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. Extensive testing of tooling operation was performed in the DWPF manipulator repair shop. This testing allowed the operators to gain confidence before the equipment was exposed to radioactive contamination. The testing also led to multiple design improvements. On July 17 and 29, 2008 the Remote Gasket Replacement Tooling was successfully demonstrated in the REDC at the DWPF of The Savannah River Site.« less

Optics education for machine operators in the semiconductor industry: moving beyond button pushing

NASA Astrophysics Data System (ADS)

Karakekes, Meg; Currier, Deborah

1995-10-01

In the competitive semiconductor manufacturing industry, employees who operate equipment are able to make greater contributions if they understand how the equipment works. By understanding the 'why' behind the 'what', the equipment operators can better partner with other technical staff to produce quality integrated circuits efficiently and effectively. This additional knowledge also opens equipment operators to job enrichment and enlargement opportunities. Advanced Micro Devices (AMD) is in the process of upgrading the skills of its equipment operators. This paper is an overview of a pilot program that employs optics education to upgrade stepper operators' skills. The paper starts with stepper tasks that require optics knowledge, examines teaching methods, reports both end-of-course and three months post-training knowledge retention, and summarizes how the training has impacted the production floor.

Differential dynamic microscopy of bidisperse colloidal suspensions.

PubMed

Safari, Mohammad S; Poling-Skutvik, Ryan; Vekilov, Peter G; Conrad, Jacinta C

2017-01-01

Research tasks in microgravity include monitoring the dynamics of constituents of varying size and mobility in processes such as aggregation, phase separation, or self-assembly. We use differential dynamic microscopy, a method readily implemented with equipment available on the International Space Station, to simultaneously resolve the dynamics of particles of radius 50 nm and 1 μm in bidisperse aqueous suspensions. Whereas traditional dynamic light scattering fails to detect a signal from the larger particles at low concentrations, differential dynamic microscopy exhibits enhanced sensitivity in these conditions by accessing smaller wavevectors where scattering from the large particles is stronger. Interference patterns due to scattering from the large particles induce non-monotonic decay of the amplitude of the dynamic correlation function with the wavevector. We show that the position of the resulting minimum contains information on the vertical position of the particles. Together with the simple instrumental requirements, the enhanced sensitivity of differential dynamic microscopy makes it an appealing alternative to dynamic light scattering to characterize samples with complex dynamics.

Intelligent Power Swing Detection Scheme to Prevent False Relay Tripping Using S-Transform

NASA Astrophysics Data System (ADS)

Mohamad, Nor Z.; Abidin, Ahmad F.; Musirin, Ismail

2014-06-01

Distance relay design is equipped with out-of-step tripping scheme to ensure correct distance relay operation during power swing. The out-of-step condition is a consequence result from unstable power swing. It requires proper detection of power swing to initiate a tripping signal followed by separation of unstable part from the entire power system. The distinguishing process of unstable swing from stable swing poses a challenging task. This paper presents an intelligent approach to detect power swing based on S-Transform signal processing tool. The proposed scheme is based on the use of S-Transform feature of active power at the distance relay measurement point. It is demonstrated that the proposed scheme is able to detect and discriminate the unstable swing from stable swing occurring in the system. To ascertain validity of the proposed scheme, simulations were carried out with the IEEE 39 bus system and its performance has been compared with the wavelet transform-based power swing detection scheme.

Crew interface specifications preparation for in-flight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Parker, F. W.; Carlton, B. E.

1972-01-01

The findings and data products developed during the Phase 2 crew interface specification study are presented. Five new NASA general specifications were prepared: operations location coding system for crew interfaces; loose equipment and stowage management requirements; loose equipment and stowage data base information requirements; spacecraft loose equipment stowage drawing requirements; and inflight stowage management data requirements. Additional data was developed defining inflight maintenance processes and related data concepts for inflight troubleshooting, remove/repair/replace and scheduled maintenance activities. The process of maintenance task and equipment definition during spacecraft design and development was also defined and related data concepts were identified for futher development into formal NASA specifications during future follow-on study phases of the contract.

30 CFR 48.7 - Training of miners assigned to a task in which they have had no previous experience; minimum...

Code of Federal Regulations, 2010 CFR

2010-07-01

... to new work tasks as mobile equipment operators, drilling machine operators, haulage and conveyor... protective measures a miner can take against these hazards, and the contents of the mine's HazCom program... operation in the mine, which require new or different operating procedures. (4) Such other courses as may be...

Learner-Centered Instruction (LCI): Volume IV, The Simulated Maintenance Task Environment (SMTE): A Job Specific Simulator.

ERIC Educational Resources Information Center

Rifkin, Kenneth I.; And Others

The purpose of the simulated maintenance task environment is to provide a means for training and job performance testing of the flight line weapon control systems mechanic/technician for the F-111A aircraft. It provides practice in flight line equipment checkout, troubleshooting, and removal and replacement of line replaceable units in the…

U.S. Army Medical Contingent to Task Force Forager Pacific Partnership 2015: Lessons and Best Practices

DTIC Science & Technology

2016-07-01

CONTINGENT-PACIFIC PARTNERSHIP 2015 Foreword Global health engagements conducted in...medical task force of health -care experts with medical equipment and supplies to conduct health engagements in four host nations, including the...at Pearl Harbor, HI, 15 medical personnel from the Australian and New Zealand defense forces; a civilian medical planner from Project HOPE ( Health

Effects of the metabotropic glutamate receptor 5 positive allosteric modulator CDPPB on rats tested with the paired associates learning task in touchscreen-equipped operant conditioning chambers.

PubMed

Lins, Brittney R; Howland, John G

2016-03-15

Effective treatments for the cognitive symptoms of schizophrenia are critically needed. Positive allosteric modulation (PAM) of metabotropic glutamate receptor subtype 5 (mGluR5) is one strategy currently under investigation to improve these symptoms. Examining cognition using touchscreen-equipped operant chambers may increase translation between preclinical and clinical research through analogous behavioral testing paradigms in rodents and humans. We used acute CDPPB (1-30mg/kg) treatment to examine the effects of mGluR5 PAM in the touchscreen paired associates learning (PAL) task using well-trained rats with and without co-administration of acute MK-801 (0.15mg/kg). CDPPB had no consistent effects on task performance when administered alone and failed to reverse the MK-801 induced impairments at any of the examined doses. Overall, the disruptive effects of MK-801 on PAL were consistent with previous research but increasing mGluR5 signaling is not beneficial in the PAL task. Future research should test whether administration of CDPPB during PAL acquisition increases performance. Copyright © 2015 Elsevier B.V. All rights reserved.

47 CFR 14.52 - Copies; service; separate filings against multiple defendants.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Copies; service; separate filings against multiple defendants. 14.52 Section 14.52 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO ADVANCED COMMUNICATIONS SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Recordkeeping, Consumer...

47 CFR 14.52 - Copies; service; separate filings against multiple defendants.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Copies; service; separate filings against multiple defendants. 14.52 Section 14.52 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO ADVANCED COMMUNICATIONS SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Recordkeeping, Consumer...

47 CFR 14.52 - Copies; service; separate filings against multiple defendants.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Copies; service; separate filings against multiple defendants. 14.52 Section 14.52 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO ADVANCED COMMUNICATIONS SERVICES AND EQUIPMENT BY PEOPLE WITH DISABILITIES Recordkeeping, Consumer...

Vapor-liquid phase separator studies

NASA Technical Reports Server (NTRS)

Yuan, S. W. K.; Lee, J. M.; Kim, Y. I.; Hepler, W. A.; Frederking, T. H. K.

1983-01-01

Porous plugs serve as both entropy rejection devices and phase separation components separating the vapor phase on the downstream side from liquid Helium 2 upstream. The liquid upstream is the cryo-reservoir fluid needed for equipment cooling by means of Helium 2, i.e Helium-4 below its lambda temperature in near-saturated states. The topics outlined are characteristic lengths, transport equations and plug results.

Optimal design and evaluation of a color separation grating using rigorous coupled wave analysis

NASA Astrophysics Data System (ADS)

Nagayoshi, Mayumi; Oka, Keiko; Klaus, Werner; Komai, Yuki; Kodate, Kashiko

2006-02-01

In recent years, the technology which separates white light into the three primary colors of Red (R), Green (G) and Blue (B) and adjusts each optical intensity and composites R, G and B to display various colors is required in the development and spread of color visual equipments. Various color separation devices have been proposed and have been put to practical use in color visual equipments. We have focused on a small and light grating-type device which has the possibility of reduction in cost and large-scale production and generates only the three primary colors of R, G and B so that a high saturation level can be obtained. To perform a rigorous analysis and design of color separation gratings, our group has developed a program that is based on the Rigorous Coupled Wave Analysis (RCWA). We then calculated the parameters to obtain a diffraction efficiency of higher than 70% and the color gamut of about 70%. We will report on the design, fabrication and evaluation of color separation gratings that have been optimized for fabrication by laser drawing.

Time manages interference in visual short-term memory.

PubMed

Smith, Amy V; McKeown, Denis; Bunce, David

2017-09-01

Emerging evidence suggests that age-related declines in memory may reflect a failure in pattern separation, a process that is believed to reduce the encoding overlap between similar stimulus representations during memory encoding. Indeed, behavioural pattern separation may be indexed by a visual continuous recognition task in which items are presented in sequence and observers report for each whether it is novel, previously viewed (old), or whether it shares features with a previously viewed item (similar). In comparison to young adults, older adults show a decreased pattern separation when the number of items between "old" and "similar" items is increased. Yet the mechanisms of forgetting underpinning this type of recognition task are yet to be explored in a cognitively homogenous group, with careful control over the parameters of the task, including elapsing time (a critical variable in models of forgetting). By extending the inter-item intervals, number of intervening items and overall decay interval, we observed in a young adult sample (N = 35, M age  = 19.56 years) that the critical factor governing performance was inter-item interval. We argue that tasks using behavioural continuous recognition to index pattern separation in immediate memory will benefit from generous inter-item spacing, offering protection from inter-item interference.

The equipment access software for a distributed UNIX-based accelerator control system

NASA Astrophysics Data System (ADS)

Trofimov, Nikolai; Zelepoukine, Serguei; Zharkov, Eugeny; Charrue, Pierre; Gareyte, Claire; Poirier, Hervé

1994-12-01

This paper presents a generic equipment access software package for a distributed control system using computers with UNIX or UNIX-like operating systems. The package consists of three main components, an application Equipment Access Library, Message Handler and Equipment Data Base. An application task, which may run in any computer in the network, sends requests to access equipment through Equipment Library calls. The basic request is in the form Equipment-Action-Data and is routed via a remote procedure call to the computer to which the given equipment is connected. In this computer the request is received by the Message Handler. According to the type of the equipment connection, the Message Handler either passes the request to the specific process software in the same computer or forwards it to a lower level network of equipment controllers using MIL1553B, GPIB, RS232 or BITBUS communication. The answer is then returned to the calling application. Descriptive information required for request routing and processing is stored in the real-time Equipment Data Base. The package has been written to be portable and is currently available on DEC Ultrix, LynxOS, HPUX, XENIX, OS-9 and Apollo domain.

A TASK UNIT CONCEPT FOR ON-THE-JOB TRAINING IN FOOD SERVICE.

ERIC Educational Resources Information Center

WELCH, JOHN

INDUSTRIAL TRAINING PROCEDURES ARE COMPARED WITH THOSE OF FOOD AND OTHER SERVICE INDUSTRIES TO ASCERTAIN RELEVANT TRAINING METHODS. HELPFUL PROCEDURES WERE--DESCRIBING EACH EMPLOYEE'S JOB BY LISTING HIS TASKS AND BREAKING DOWN EACH TASK INTO ITS SEPARATE OPERATIONS. THEN THE BEST METHOD OF TRAINING FOR EACH TASK CAN BE DETERMINED. A TIME AND…

Emergency Medical Technician Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 12 duties in the occupation of emergency medical technician. Each duty is divided into a number of tasks. A separate page for each duty lists the task with its code number and columns to indicate whether that particular duty has been taught and to provide space for comments. The 12 duties…

Preschool Children's Performance in Task Switching on the Dimensional Change Card Sort Task: Separating the Dimensions Aids the Ability to Switch

PubMed Central

Diamond, Adele; Carlson, Stephanie M.; Beck, Danielle M.

2006-01-01

Fifty-seven children (53% female) at 3 ages (2½, 3, and 3½ years) were tested on the standard Dimensional Change Card Sort (DCCS) task with integrated stimuli (e.g., a red truck) and on a separated-dimensions version where colorless shapes were presented on a colored background (e.g., a black truck on a red background). Roughly twice as many children successfully switched sorting dimensions when color was a property of the background than when color was a property of the shape itself. Children succeeded 6 months earlier in switching sorting criteria when the dimensions were separated. When evidence of both indecision and accuracy was taken into account, a clear and rich developmental progression emerged. These results support an inhibitory control interpretation of preschoolers' problems on the DCCS task. Diamond theorized that young children can have difficulty integrating features not part of a single object and separating features of a single object so that the object can be categorized first by one attribute and then by another. Preschoolers remain stuck in thinking about objects according to the objects' initially relevant attribute (attentional inertia; Kirkham, Cruess, & Diamond, 2003). To switch perspectives, the old way of thinking about the objects must be inhibited. Separating color and shape reduced the need for such inhibition; a truck was always a truck, and the background was always red. PMID:16144433

Improved application of independent component analysis to functional magnetic resonance imaging study via linear projection techniques.

PubMed

Long, Zhiying; Chen, Kewei; Wu, Xia; Reiman, Eric; Peng, Danling; Yao, Li

2009-02-01

Spatial Independent component analysis (sICA) has been widely used to analyze functional magnetic resonance imaging (fMRI) data. The well accepted implicit assumption is the spatially statistical independency of intrinsic sources identified by sICA, making the sICA applications difficult for data in which there exist interdependent sources and confounding factors. This interdependency can arise, for instance, from fMRI studies investigating two tasks in a single session. In this study, we introduced a linear projection approach and considered its utilization as a tool to separate task-related components from two-task fMRI data. The robustness and feasibility of the method are substantiated through simulation on computer data and fMRI real rest data. Both simulated and real two-task fMRI experiments demonstrated that sICA in combination with the projection method succeeded in separating spatially dependent components and had better detection power than pure model-based method when estimating activation induced by each task as well as both tasks.

40 CFR 63.1423 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (subpart F) Incinerator (subpart G) Major source (subpart A) Malfunction (subpart A) Oil-water separator or organic-water separator (subpart G) Open-ended valve or line (subpart H) Operating permit (subpart F... process unit consists of more than one unit operation. This collection of equipment includes purification...

40 CFR 63.1423 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (subpart F) Incinerator (subpart G) Major source (subpart A) Malfunction (subpart A) Oil-water separator or organic-water separator (subpart G) Open-ended valve or line (subpart H) Operating permit (subpart F... process unit consists of more than one unit operation. This collection of equipment includes purification...

SU-E-T-649: Quality Assurances for Proton Therapy Delivery Equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arjomandy, B; Kase, Y; Flanz, J

2015-06-15

Purpose: The number of proton therapy centers has increased dramatically over the past decade. Currently, there is no comprehensive set of guidelines that addresses quality assurance (QA) procedures for the different technologies used for proton therapy. The AAPM has charged task group 224 (TG-224) to provide recommendations for QA required for accurate and safe dose delivery, using existing and next generation proton therapy delivery equipment. Methods: A database comprised of QA procedures and tolerance limits was generated from many existing proton therapy centers in and outside of the US. These consist of proton therapy centers that possessed double scattering, uniformmore » scanning, and pencil beams delivery systems. The diversity in beam delivery systems as well as the existing devices to perform QA checks for different beam parameters is the main subject of TG-224. Based on current practice at the clinically active proton centers participating in this task group, consensus QA recommendations were developed. The methodologies and requirements of the parameters that must be verified for consistency of the performance of the proton beam delivery systems are discussed. Results: TG-224 provides procedures and QA checks for mechanical, imaging, safety and dosimetry requirements for different proton equipment. These procedures are categorized based on their importance and their required frequencies in order to deliver a safe and consistent dose. The task group provides daily, weekly, monthly, and annual QA check procedures with their tolerance limits. Conclusions: The procedures outlined in this protocol provide sufficient information to qualified medical physicists to perform QA checks for any proton delivery system. Execution of these procedures should provide confidence that proton therapy equipment is functioning as commissioned for patient treatment and delivers dose safely and accurately within the established tolerance limits. The report will be published in late 2015.« less

75 FR 3253 - Lamb Assembly and Test, LLC, Subsidiary of Mag Industrial Automation Systems, Machesney Park, IL...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-20

..., LLC, Subsidiary of Mag Industrial Automation Systems, Machesney Park, IL; Notice of Negative... automation equipment and machine tools did not contribute to worker separations at the subject facility and...' firm's declining customers. The survey revealed no imports of automation equipment and machine tools by...

46 CFR 162.050-5 - Contents of application.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Contents of application. 162.050-5 Section 162.050-5...: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Pollution Prevention Equipment § 162.050-5 Contents of application. (a) An application for approval of a separator, oil content meter, or a bilge alarm must contain...

Your Fire Department. Organization--Recruitment--Equipment--Training. Revised.

ERIC Educational Resources Information Center

Pribyl, Paul F.

This publication is intended as a guide in the organization, staffing, equipping, and training of fire departments in Wisconsin. A separate section focuses on each of these four areas. The first section discusses an ordinance to create a fire department, qualifications and authority of the fire chief, and an outline of duties and responsibilities…

Separability of Lexical and Morphological Knowledge: Evidence from Language Minority Children

PubMed Central

Shahar-Yames, Daphna; Eviatar, Zohar; Prior, Anat

2018-01-01

Lexical and morphological knowledge of school-aged children are correlated with each other, and are often difficult to distinguish. One reason for this might be that many tasks currently used to assess morphological knowledge require children to inflect or derive real words in the language, thus recruiting their vocabulary knowledge. The current study investigated the possible separability of lexical and morphological knowledge using two complementary approaches. First, we examined the correlations between vocabulary and four morphological tasks tapping different aspects of morphological processing and awareness, and using either real-word or pseudo-word stimuli. Thus, we tested the hypothesis that different morphological tasks recruit lexical knowledge to various degrees. Second, we compared the Hebrew vocabulary and morphological knowledge of 5th grade language minority speaking children to that of their native speaking peers. This comparison allows us to ask whether reduced exposure to the societal language might differentially influence vocabulary and morphological knowledge. The results demonstrate that indeed different morphological tasks rely on lexical knowledge to varying degrees. In addition, language minority students had significantly lower performance in vocabulary and in morphological tasks that recruited vocabulary knowledge to a greater extent. In contrast, both groups performed similarly in abstract morphological tasks with a lower vocabulary load. These results demonstrate that lexical and morphological knowledge may rely on partially separable learning mechanisms, and highlight the importance of distinguishing between these two linguistic components. PMID:29515486

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The objective of Task 1 is to prepare and evaluate catalysts and to develop efficient reactor systems for the selective conversion of hydrogen-lean synthesis gas to alcohol fuel extender and octane enhancers. Task 1 is subdivided into three separate subtasks: laboratory and equipment setup; catalysis research; and reaction engineering and modeling. Research at West Virginia University (WVU) is focused on molybdenum-based catalysts for higher alcohol synthesis. Parallel research carried out at Union Carbide Corporation (UCC) is focused on transition-metal-oxide catalysts. During this time period, at WVU, we tried several methods to eliminate problems related to condensation of heavier products whenmore » reduced Mo-Ni-K/C materials were used as catalysts. We then resumed our kinetic study on the reduced Mo-Ni-K/C materials were used as catalysts. We then resumed our kinetic study on the reduced Mo-Ni-K/C catalysts. We have also obtained same preliminary results in our attempts to analyze quantitatively the temperature-programmed reduction spectra for C- supported Mo-based catalysts. We have completed the kinetic study for the sulfided Co-K-MoS{sub 2}/C catalyst. We have compared the results of methanol synthesis using the membrane reactor with those using a simple plug-flow reactor. At UCC, the complete characterization of selected catalysts has been completed. The results suggest that catalyst pretreatment under different reducing conditions yield different surface compositions and thus different catalytic reactivities.« less

An Investigation of the Inertial Properties of Backpacks Loaded in Various Configurations

DTIC Science & Technology

1982-05-01

and Richard C. Nelson, Ph.D. S. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK AREA & WORK UNIT NUMBERS Biomechanics ...backpacks loads backpack system load carrying military clothing human backpack system military equipment loading configurations inertial properties 2i04...configuration, a 12.00-kg load, consisting of military clothing and equip- ment, was placed in the packs. The locations of the items were manipulated

A unique challenge: Emergency egress and life support equipment at KSC

NASA Technical Reports Server (NTRS)

Waddell, H. M., Jr.

1975-01-01

As a result of the investigation following the January 1967 fire, which took the lives of three astronauts, materials were developed, flight hardware was modified, and test procedures were rewritten in order to establish the framework within which a more effective rescue concept could be developed. Topics discussed include breathing units, improved life support equipment, miniresuscitators, and hazardous tasks during space shuttle launch and landing operations.

View in the Node 1/Unity module after docking

NASA Image and Video Library

1998-12-10

S88-E-5112 (12-10-98)) --- Astronaut Jerry L. Ross, mission specialist, packs a bag of tools and equipment in the hatchway of the Unity connecting module. Ross and his crewmates were installing hand rails and other equipment and performing various tasks to ready the Unity and Zarya for their ISS roles. The photo was taken with an electronic still camera at 20:26:02 GMT, Dec. 10.

East Europe Report, Economic and Industrial Affairs

DTIC Science & Technology

1984-08-24

inclusion in the prices of extra overhead costs of monopolistic enterprises also have a distorting effect on prices (pp 97ff). Kopatsy is also right... price of petroleum has led to the reconsid- eration of the energy policy in all the petroleum- consuming countries, turning from the era of waste to...the tasks that face the Romanian exporters of petroleum equipment, by creating proper representations in areas and countries consuming such equipment

Eyes On the Ground: Year 2 Assessment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brost, Randolph; Little, Charles Q.; McDaniel, Michael

The goal of the Eyes On the Ground project is to develop tools to aid IAEA inspectors. Our original vision was to produce a tool that would take three-dimensional measurements of an unknown piece of equipment, construct a semantic representation of the measured object, and then use the resulting data to infer possible explanations of equipment function. We report our tests of a 3-d laser scanner to obtain 3-d point cloud data, and subsequent tests of software to convert the resulting point clouds into primitive geometric objects such as planes and cylinders. These tests successfully identified pipes of moderate diametermore » and planar surfaces, but also incurred significant noise. We also investigated the IAEA inspector task context, and learned that task constraints may present significant obstacles to using 3-d laser scanners. We further learned that equipment scale and enclosing cases may confound our original goal of equipment diagnosis. Meanwhile, we also surveyed the rapidly evolving field of 3-d measurement technology, and identified alternative sensor modalities that may prove more suitable for inspector use in a safeguards context. We conclude with a detailed discussion of lessons learned and the resulting implications for project goals. Approved for public release; further dissemination unlimited.« less

National Guard and Reserve Equipment Report for Fiscal Year 2012 (NGRER FY 2012)

DTIC Science & Technology

2011-02-01

capability of COCOM-tasked equipment on-hand—equipment not optimized for the domestic challenges. There has been some progress in the wake of the SecDef...DED 10K lb 12ft Blade J74920 $62,181 2 2 2 2 0 Crane-shovel Crwlr-mtd: w/Boom 50ft 40 ton F40474 $270,000 2 2 2 2 0 Maneuver Combat Vehicles Recovery... noise -abatement and navigation requirements. A 2008 Center for Naval Analysis C-9 study calculated an operational equivalency of 1.8 C-9s to 1.0 C

Scientific and technical collaboration between Russian and Ukranian researchers and manufacturers on the development of astronomical instruments equipped with advanced detection services

NASA Astrophysics Data System (ADS)

Vishnevsky, G. I.; Galyatkin, I. A.; Zhuk, A. A.; Iblyaminova, A. F.; Kossov, V. G.; Levko, G. V.; Nesterov, V. K.; Rivkind, V. L.; Rogalev, Yu. N.; Smirnov, A. V.; Gumerov, R. I.; Bikmaev, I. F.; Pinigin, G. I.; Shulga, A. V.; Kovalchyk, A. V.; Protsyuk, Yu. I.; Malevinsky, S. V.; Abrosimov, V. M.; Mironenko, V. N.; Savchenko, V. V.; Ivaschenko, Yu. N.; Andruk, V. M.; Dalinenko, I. N.; Vydrevich, M. G.

2003-01-01

The paper presents the possibilities and a list of tasks that are solved by collaboration between research and production companies, and astronomical observatories of Russia and Ukraine in the field of development, modernization and equipping of various telescopes (the AMC, RTT-150, Zeiss-600 and quantum-optical system Sazhen-S types) with advanced charge-coupled device (CCD) cameras. CCD imagers and ditital CCD cameras designed and manufactured by the "Electron-Optronic" Research & Production Company, St Petersburg, to equip astronomical telescopes and scientific instruments are described.

A comparison of deployed occupational tasks performed by different types of military battalions and resulting low back pain.

PubMed

Roy, Tanja C; Lopez, Heather P

2013-08-01

With deployment Soldiers must now wear body armor and additional equipment while performing occupational tasks, representing a large demand that has not been considered when studying military occupations. The purpose of this study was to: (1) describe tasks required by different occupational battalions within a Brigade Combat Team; (2) establish the incidence of low back pain (LBP) in each battalion and; (3) determine which tasks predict LBP within the different battalions. This was a prospective cohort study investigating 805 Soldiers in a Brigade Combat Team deployed to Afghanistan for 1 year. Demographic, occupational, and fitness variables were recorded. There was no difference in time spent on fitness training between the battalions. Occupational tasks performed by deployed Soldiers vary in the level of physical demand between battalions. Infantry had the highest fitness score (257); wore the heaviest equipment (70 lb.); spent the most time wearing body armor (49 hours/week), performing dismounted patrol (29 hours/week), and lifting objects (35 hours/week); spent the least amount of time working at a desk (14 hours/week); but had a similar incidence of LBP (77%) compared to other battalions. History of LBP and time spent wearing body armor were the two most consistent predictors of LBP across battalion types. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

The Effect of Task Duration on Event-Based Prospective Memory: A Multinomial Modeling Approach

PubMed Central

Zhang, Hongxia; Tang, Weihai; Liu, Xiping

2017-01-01

Remembering to perform an action when a specific event occurs is referred to as Event-Based Prospective Memory (EBPM). This study investigated how EBPM performance is affected by task duration by having university students (n = 223) perform an EBPM task that was embedded within an ongoing computer-based color-matching task. For this experiment, we separated the overall task’s duration into the filler task duration and the ongoing task duration. The filler task duration is the length of time between the intention and the beginning of the ongoing task, and the ongoing task duration is the length of time between the beginning of the ongoing task and the appearance of the first Prospective Memory (PM) cue. The filler task duration and ongoing task duration were further divided into three levels: 3, 6, and 9 min. Two factors were then orthogonally manipulated between-subjects using a multinomial processing tree model to separate the effects of different task durations on the two EBPM components. A mediation model was then created to verify whether task duration influences EBPM via self-reminding or discrimination. The results reveal three points. (1) Lengthening the duration of ongoing tasks had a negative effect on EBPM performance while lengthening the duration of the filler task had no significant effect on it. (2) As the filler task was lengthened, both the prospective and retrospective components show a decreasing and then increasing trend. Also, when the ongoing task duration was lengthened, the prospective component decreased while the retrospective component significantly increased. (3) The mediating effect of discrimination between the task duration and EBPM performance was significant. We concluded that different task durations influence EBPM performance through different components with discrimination being the mediator between task duration and EBPM performance. PMID:29163277

Surrogate Robot

NASA Image and Video Library

2014-08-21

The Surrogate robot Surge, built at NASA Jet Propulsion Laboratory in Pasadena, CA., is being developed in order to extend humanity reach into hazardous environments to perform tasks such as using environmental test equipment.

Job Language Performance Requirements for MOS 62B, Construction Equipment Repairer, Reference Soldier’s Manual Dated 13 March 1978.

DTIC Science & Technology

1978-03-13

STANDARDS: 100% understandable and legible written content III. TASK NUMBERS AND TITLES 051-191- 1241 Prepare An M72A2 LAW For Firing; Restore M72A2 LAW To...understanding of ornl comr.|nication TASK: Produce appropriate oral respoa5es spontaii.-,)usly or upon request CONDITIONS: Given any vcrbz! stimulur in

Advanced Alarm Systems: Revision of Guidance and Its Technical Basis

DTIC Science & Technology

2000-11-01

was required to generalize from the unique aspects of individual experiments and studies to actual applications in the workplace . This is because...types of equipment used). For example , laboratory experiments often do not involve tasks of the complexity of NPP operations, and most experiments do...Cognitive Compatibility, Situation Awareness, Task Compatibility, and Timeliness. Figure 3.3 Example of an alarm system design review guideline Each

Dento-ergonomics: the key to energy-saving performance.

PubMed

Pollack, R

1996-04-01

The application of ergonomics to dentistry, or dento-ergonomics, can increase efficiency and prevent injury. Among the factors that need to be considered are the height and reach of staff members, the equipment being used and the distribution of tasks. By implementing the theories of ergonomics, dental care providers can prolong their interest and commitment to dentistry by making difficult or even painful tasks less stressful.

Evaluating Maintenance Performance: Test Administrator's Manual and Test Subject's Instructions for Criterion Referenced Job Task Performance Tests for Electronic Maintenance. Final Report.

ERIC Educational Resources Information Center

Shriver, Edgar L.; And Others

This document furnishes a complete copy of the Test Subject's Instructions and the Test Administrator's Handbook for a battery of criterion referenced Job Task Performance Tests (JTPT) for electronic maintenance. General information is provided on soldering, Radar Set AN/APN-147(v), Radar Set Special Equipment, Radar Set Bench Test Set-Up, and…

Integral Engine Inlet Particle Separator. Volume 1. Technology Program

DTIC Science & Technology

1975-07-01

inlet particle separators for future Army aircraft gas turbine engines . Appropriate technical personnel of this Directorate have reviewed this report...USAAMRDL-TR-75-31A I - / INTEGRAL ENGINE INLET PARTICLE SEPARATOR Volume I-- Technology Program General Electric Company Aircraft Engine Group...N1 i 9ap mm tm~qu INTRODUCTION The adverse environments in which Army equipment operates impose severe )enalties upon gas turbine engine performance

[Progress of the ATM Crew}

NASA Technical Reports Server (NTRS)

Krabill, W. (Technical Monitor)

2001-01-01

Contract NAS5-99094 was initiated on December 1, 1998. The subject contract contains 5 tasks covering specific activities in support of 3 major sensor programs, each with a separate NASA Principal Investigator (PI). Accordingly, the bimonthly narrative is organized such that each of the programs are discussed separately with individual task activities presented within each of the programs. Acronyms are used throughout the report to keep the writing succinct. An attached glossary contains definitions for these acronyms.

Nimodipine alters acquisition of a visual discrimination task in chicks.

PubMed

Deyo, R; Panksepp, J; Conner, R L

1990-03-01

Chicks 5 days old received intraperitoneal injections of nimodipine 30 min before training on either a visual discrimination task (0, 0.5, 1.0, or 5.0 mg/kg) or a test of separation-induced distress vocalizations (0, 0.5, or 2.5 mg/kg). Chicks receiving 1.0 mg/kg nimodipine made significantly fewer visual discrimination errors than vehicle controls by trials 41-60, but did not differ from controls 24 h later. Chicks in the 5 mg/kg group made significantly more errors when compared to controls both during acquisition of the task and during retention. Nimodipine did not alter separation-induced distress vocalizations at any of the doses tested, suggesting that nimodipine's effects on learning cannot be attributed to a reduction in separation distress. These data indicate that nimodipine's facilitation of learning in young subjects is dose dependent, but nimodipine failed to enhance retention.

49 CFR 1242.47 - Machinery (account XX-27-40).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Machinery (account XX-27-40). 1242.47 Section 1242...-Equipment § 1242.47 Machinery (account XX-27-40). Separate common expenses on the basis of the freight/passenger separation of administration (account XX-27-01). ...

7 CFR 3300.37 - Testing of a mechanical refrigerating appliance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Testing of a mechanical refrigerating appliance. 3300... SPECIAL EQUIPMENT Procedures for Separate Testing of Mechanical Refrigerating Appliances § 3300.37 Testing of a mechanical refrigerating appliance. For separate testing of a mechanical refrigerating appliance...

Radioactive-gas separation technique

NASA Technical Reports Server (NTRS)

Haney, R.; King, K. J.; Nellis, D. O.; Nisson, R. S.; Robling, P.; Womack, W.

1977-01-01

Cryogenic technique recovers gases inexpensively. Method uses differences in vapor pressures, melting points, and boiling points of components in gaseous mixture. Series of temperature and pressure variations converts gases independently to solid and liquid states, thereby simplifying separation. Apparatus uses readily available cryogen and does not require expensive refrigeration equipment.

Impact of intraoperative distractions on patient safety: a prospective descriptive study using validated instruments.

PubMed

Sevdalis, Nick; Undre, Shabnam; McDermott, James; Giddie, Jasdeep; Diner, Lila; Smith, Gillian

2014-04-01

There is emerging evidence indicating that distractions in the operating room (OR) are prevalent. Studies have shown a negative impact of distractions, but they have been conducted mostly with residents in simulated environments. We tested the hypothesis that intraoperative distractions are associated with deterioration in patient safety checks in the OR. We assessed 24 elective urologic procedures. Blinded trained assessors (two surgeons, one psychologist) used validated instruments to prospectively assess in vivo frequency and severity of distractions (related to communication, phones/pagers, equipment/provisions, OR environment, other hospital departments, or a member of the OR team) and completion of safety-related tasks (related to the patient, equipment, and communication). Descriptive and correlational analyses were conducted. Mean case duration was 70 min (mean intraoperative time 31 min). A mean of 4.0 communication distractions (range 0-9) and 2.48 other distractions (range 0-5) were recorded per case (distraction rate of one per 10 min). Distractions from external visitors (addressed to the entire team or the surgeon) and distractions due to lack of coordination between hospital departments were most disruptive. Regarding safety checks, patient tasks were completed most often (85-100 %) followed by equipment tasks (75-100 %) and communication tasks (55-90 %). Correlational analyses showed that more frequent/severe communication distractions were linked to lower completion of patient checks intraoperatively (median rho -0.56, p < 0.05). Distractions are prevalent in ORs and in this study were linked to deterioration in intraoperative patient safety checks. Surgeons should be mindful of their tolerance to distractions. Surgical leadership can help control distractions and reduce their potential impact on patient safety and performance.

TSAR User’s Manual: A Program for Assessing the Effects of Conventional and Chemical Attacks on Sortie Generation. Volume 1. Program Features, Logic, and Interactions

DTIC Science & Technology

1990-09-01

that work will be done at the point where Task 30000 is specified. The unscheduled on-equipment aircraft tasks are normally grouped together with the...probability events, TSAR groups together those tasks performed by the same work center or shop and selects at most one following each flighL Processing is...remainder capable only of assembling other kinds. Furthermore, the first group of personnel should be specified to be cross-trained to do the work of

Proceedings of the TRADOC/Training Developments Institute Chiefs of Anlaysis Seminar (4th) Held in Hampton, Virginia, 16-18 July 1980.

DTIC Science & Technology

1980-09-30

SCHOOL (SME’s/JE’s) FOR MOS CRITICAL WORD SELECTION AND ASSIGNMENT OF IMPORTANCE INDEX 1-5. ( TD [/SCHOOLS) I FINAL WCA REPORT: CRITICAL WORDS LISTED A-Z...personnel performing tasks, equipment used or maintained, senior technician’s rating of relative difficulty of tasks ( TD ), and supervisor’s recommended...emphasis on tasks in first enlistment training (TE). Recent innovations permit formatting of occupational data, including TD and TE ratings, in the form of

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Amanda S.; Brosha, Eric

This is a progress report for the demonstration of a prototype hydrogen sensor and electronics package. There are five tasks associated with this, and four have been completed as of August 2016: Station Demonstration and Site Recommendation, Order Sensor Equipment, Build Sensors, and Install Sensors. The final task to be completed is Sensor Demonstration and Data Analysis, and expected completion date is January 26, 2017. This progress report details each of the tasks and goes into detail about what is currently being worked on, along with the budget and planned work for July 27, 2016 to January 26, 2017.

Fall from equipment injuries in U.S. mining: identification of specific research areas for future investigation.

PubMed

Moore, Susan M; Porter, William L; Dempsey, Patrick G

2009-01-01

The objective of this study was to evaluate the circumstances leading to fall from equipment injuries in the mining industry. The 2006 and 2007 Mine Safety and Health Administration annual injury databases were utilized for this study whereby the injury narrative, nature of injury, body part injured, mine type, age at injury, and days lost were evaluated for each injury. The majority of injuries occurred at surface mining facilities (approximately 60%) with fractures and sprains/strains being the most common injuries occurring to the major joints of the body. Nearly 50% of injuries occurred during ingress/egress, predominantely during egress, and approximately 25% of injuries occurred during maintenance tasks. The majority of injuries occurred in relation to large trucks, wheel loaders, dozers, and conveyors/belts. The severity of injury was independent of age and the median days lost was seven days; however, there was a large range in severity. From the data obtained in this study, several different research areas have been identified for future work, which include balance and stability control when descending ladders and equipment design for maintenance tasks.

The Tapley and Bryden test of performance differences between the hands: The original data, newer data, and the relation to pegboard and other tasks.

PubMed

McManus, I C; Van Horn, John Darrell; Bryden, Pamela J

2016-02-08

Tapley and Bryden (T&B)'s 1985 circle-marking task is a group-administered task assessing performance differences between the hands. The bimodal distribution clearly separates self-described right- and left-handers. Using Phil's original datafiles we analyse the test in more detail, providing raw scores for each hands which are useful forensically, and we provide reliability estimates. Van Horn's unpublished 1992 PhD thesis studied T&B tasks and Annett pegboards varying in difficulty. A striking finding, that Phil Bryden called "the Van Horn problem," was that hand differences (R - L) were unrelated to task difficulty. That result was the starting point for Pamela Bryden's 1998 thesis, firstly replicating Van Horn, but then showing that task difficulty did relate to hand differences for Grooved pegboards. Pamela Bryden's model for those effects is presented here. Comparing across tasks, the T&B and pegboard tasks showed almost complete consistency for direction of handedness. Likewise, within each task, degree of handedness intercorrelated strongly across variants. In strong contrast, degree of handedness for T&B tasks showed minimal correlation with degree of handedness for pegboards. At the highest level, therefore, direction of handedness is consistent within individuals (conventional right and left handedness), but there are separable processes determining dominant-non-dominant hands differences for each particular task.

Graphics Design Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Idaho secondary education curriculum guide provides lists of tasks, performance objectives, and enabling objectives for instruction intended to impart entry-level employment skills in graphics design technology. The first list states all tasks for 11 areas; separate lists for each area follow. Each task on the lists is accompanied by a…

Individual Differences in Dual Task Performance. Final Report.

ERIC Educational Resources Information Center

Lansman, Marcy; Hunt, Earl

This report summarizes the research results and provides a reference. The basic question addressed was, "Is performance on multi-component tasks predicted by performance on the individual components performed separately?" In the first series of experiments, a dual task involving memory and verbal processing components to predict a…

Academic Research Equipment in Selected Science Engineering Fields: 1982-83 to 1985-86.

ERIC Educational Resources Information Center

Burgdorf, Kenneth; Chaney, Bradford

This report presents information for identification of the national trends in the amount, age, loss, condition, and perceived adequacy of academic research equipment in selected science and engineering fields. The data were obtained from a stratified probability sample of 55 colleges and universities and from a separately selected sample of 24…

33 CFR 149.328 - How must work vests and anti-exposure (deck) suits be stowed?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How must work vests and anti... EQUIPMENT Lifesaving Equipment Manned Deepwater Port Requirements § 149.328 How must work vests and anti-exposure (deck) suits be stowed? All work vests and deck suits must be stowed separately from lifejackets...

33 CFR 149.328 - How must work vests and anti-exposure (deck) suits be stowed?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false How must work vests and anti... EQUIPMENT Lifesaving Equipment Manned Deepwater Port Requirements § 149.328 How must work vests and anti-exposure (deck) suits be stowed? All work vests and deck suits must be stowed separately from lifejackets...

33 CFR 149.328 - How must work vests and anti-exposure (deck) suits be stowed?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false How must work vests and anti... EQUIPMENT Lifesaving Equipment Manned Deepwater Port Requirements § 149.328 How must work vests and anti-exposure (deck) suits be stowed? All work vests and deck suits must be stowed separately from lifejackets...

33 CFR 149.328 - How must work vests and anti-exposure (deck) suits be stowed?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false How must work vests and anti... EQUIPMENT Lifesaving Equipment Manned Deepwater Port Requirements § 149.328 How must work vests and anti-exposure (deck) suits be stowed? All work vests and deck suits must be stowed separately from lifejackets...

33 CFR 149.328 - How must work vests and anti-exposure (deck) suits be stowed?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false How must work vests and anti... EQUIPMENT Lifesaving Equipment Manned Deepwater Port Requirements § 149.328 How must work vests and anti-exposure (deck) suits be stowed? All work vests and deck suits must be stowed separately from lifejackets...

Enhancing Computer Science Education with a Wireless Intelligent Simulation Environment

ERIC Educational Resources Information Center

Cook, Diane J.; Huber, Manfred; Yerraballi, Ramesh; Holder, Lawrence B.

2004-01-01

The goal of this project is to develop a unique simulation environment that can be used to increase students' interest and expertise in Computer Science curriculum. Hands-on experience with physical or simulated equipment is an essential ingredient for learning, but many approaches to training develop a separate piece of equipment or software for…

Brain activity during divided and selective attention to auditory and visual sentence comprehension tasks

PubMed Central

Moisala, Mona; Salmela, Viljami; Salo, Emma; Carlson, Synnöve; Vuontela, Virve; Salonen, Oili; Alho, Kimmo

2015-01-01

Using functional magnetic resonance imaging (fMRI), we measured brain activity of human participants while they performed a sentence congruence judgment task in either the visual or auditory modality separately, or in both modalities simultaneously. Significant performance decrements were observed when attention was divided between the two modalities compared with when one modality was selectively attended. Compared with selective attention (i.e., single tasking), divided attention (i.e., dual-tasking) did not recruit additional cortical regions, but resulted in increased activity in medial and lateral frontal regions which were also activated by the component tasks when performed separately. Areas involved in semantic language processing were revealed predominantly in the left lateral prefrontal cortex by contrasting incongruent with congruent sentences. These areas also showed significant activity increases during divided attention in relation to selective attention. In the sensory cortices, no crossmodal inhibition was observed during divided attention when compared with selective attention to one modality. Our results suggest that the observed performance decrements during dual-tasking are due to interference of the two tasks because they utilize the same part of the cortex. Moreover, semantic dual-tasking did not appear to recruit additional brain areas in comparison with single tasking, and no crossmodal inhibition was observed during intermodal divided attention. PMID:25745395

Brain activity during divided and selective attention to auditory and visual sentence comprehension tasks.

PubMed

Moisala, Mona; Salmela, Viljami; Salo, Emma; Carlson, Synnöve; Vuontela, Virve; Salonen, Oili; Alho, Kimmo

2015-01-01

Using functional magnetic resonance imaging (fMRI), we measured brain activity of human participants while they performed a sentence congruence judgment task in either the visual or auditory modality separately, or in both modalities simultaneously. Significant performance decrements were observed when attention was divided between the two modalities compared with when one modality was selectively attended. Compared with selective attention (i.e., single tasking), divided attention (i.e., dual-tasking) did not recruit additional cortical regions, but resulted in increased activity in medial and lateral frontal regions which were also activated by the component tasks when performed separately. Areas involved in semantic language processing were revealed predominantly in the left lateral prefrontal cortex by contrasting incongruent with congruent sentences. These areas also showed significant activity increases during divided attention in relation to selective attention. In the sensory cortices, no crossmodal inhibition was observed during divided attention when compared with selective attention to one modality. Our results suggest that the observed performance decrements during dual-tasking are due to interference of the two tasks because they utilize the same part of the cortex. Moreover, semantic dual-tasking did not appear to recruit additional brain areas in comparison with single tasking, and no crossmodal inhibition was observed during intermodal divided attention.

49 CFR 1242.36 - Machinery repair and equipment damaged (accounts XX-26-40 and XX-26-48).

Code of Federal Regulations, 2010 CFR

2010-10-01

... XX-26-40 and XX-26-48). 1242.36 Section 1242.36 Transportation Other Regulations Relating to... (accounts XX-26-40 and XX-26-48). Separate common expenses according to separation of common expenses in repair and maintenance (account XX-26-41). ...

40 CFR 98.230 - Definition of the source category.

Code of Federal Regulations, 2011 CFR

2011-07-01

... gas liquids (NGLs) and/or other non-methane gases and liquids from a stream of produced natural gas... removal, separation of natural gas liquids, sulfur and carbon dioxide removal, fractionation of NGLs, or... include equipment for liquids separation, natural gas dehydration, and tanks for the storage of water and...

Understanding risks of workplace injury in labor and delivery.

PubMed

Stichler, Jaynelle F; Feiler, Judd L; Chase, Kimberlie

2012-01-01

To understand nurse and other staff perceptions about care activities in labor and delivery (L&D) that were performed with high frequency, required high exertion, and had the greatest potential to cause injury and to determine what personal characteristics might be related to the caregiving tasks with potential for injury. This exploratory study employed a mixed methods design using qualitative open-ended questions and quantitative surveys administered in three different times (n = 56, 58, and 58). A 22-room L&D unit in a women's hospital with 8,500 annual deliveries. Nurses and assistive staff. High-risk tasks were classified in three categories. High-exertion tasks included (a) moving patients in labor, delivery, recovery (LDR) beds to other locations; (b) breaking delivery beds and applying stirrups; (c) assisting dependent patients with mobility in bed; and (d) pushing medical equipment and delivery carts. Awkward posture tasks during patient care included (a) listening for heart tones; (b) performing difficult vaginal exams; (c) keeping the fetal head off of the cord during cord prolapse; and (d) assisting with epidurals. Culture of safety tasks included (a) physician requests to conduct patient care tasks that put staff at risk for injury; (b) providers ignoring broken equipment in the environment; (c) responding to emergent/urgent situations without regard to self-posturing to prevent injury; and (d) holding patients' legs during delivery at the physician's direction. Several significant correlations were noted between demographic variables and high potential for risk items. This study provides the first information about the caregiving tasks L&D nurses perceive to be risky for personal injury because of their high frequency and exertion or breaches in the culture of safety. © 2011 AWHONN, the Association of Women's Health, Obsteric and Neonatal Nurses.

Creation of system of computer-aided design for technological objects

NASA Astrophysics Data System (ADS)

Zubkova, T. M.; Tokareva, M. A.; Sultanov, N. Z.

2018-05-01

Due to the competition in the market of process equipment, its production should be flexible, retuning to various product configurations, raw materials and productivity, depending on the current market needs. This process is not possible without CAD (computer-aided design). The formation of CAD begins with planning. Synthesizing, analyzing, evaluating, converting operations, as well as visualization and decision-making operations, can be automated. Based on formal description of the design procedures, the design route in the form of an oriented graph is constructed. The decomposition of the design process, represented by the formalized description of the design procedures, makes it possible to make an informed choice of the CAD component for the solution of the task. The object-oriented approach allows us to consider the CAD as an independent system whose properties are inherited from the components. The first step determines the range of tasks to be performed by the system, and a set of components for their implementation. The second one is the configuration of the selected components. The interaction between the selected components is carried out using the CALS standards. The chosen CAD / CAE-oriented approach allows creating a single model, which is stored in the database of the subject area. Each of the integration stages is implemented as a separate functional block. The transformation of the CAD model into the model of the internal representation is realized by the block of searching for the geometric parameters of the technological machine, in which the XML-model of the construction is obtained on the basis of the feature method from the theory of image recognition. The configuration of integrated components is divided into three consecutive steps: configuring tasks, components, interfaces. The configuration of the components is realized using the theory of "soft computations" using the Mamdani fuzzy inference algorithm.

Attachment Anxiety, Verbal Immediacy, and Blood Pressure: Results from a Laboratory-Analogue Study Following Marital Separation

PubMed Central

Lee, Lauren A.; Sbarra, David A.; Mason, Ashley E.; Law, Rita W.

2011-01-01

Marital separation and divorce increase risk for all-cause morbidity and mortality. Using a laboratory analogue paradigm, the present study examined attachment anxiety, language use, and blood pressure (BP) reactivity among 119 (n = 43 men, 76 women) recently separated adults who were asked to mentally reflect on their relationship history and separation experience. We created a language use composite of verbal immediacy from participants’ stream-of-consciousness recordings about their separation experience as a behavioral index of attachment-related hyperactivation. Verbal immediacy moderated the association between attachment anxiety and BP at the beginning of a divorce-specific activation task. Participants reporting high attachment anxiety who discussed their separation in a first-person, present-oriented and highly engaged manner evidenced the highest levels of BP at the start of the divorce-specific task. Results provide a deeper understanding of the association between marital dissolution and health and suggest that verbal immediacy may be a useful behavioral index of hyperactivating coping strategies. PMID:21647240

Attachment Anxiety, Verbal Immediacy, and Blood Pressure: Results from a Laboratory-Analogue Study Following Marital Separation.

PubMed

Lee, Lauren A; Sbarra, David A; Mason, Ashley E; Law, Rita W

2011-06-01

Marital separation and divorce increase risk for all-cause morbidity and mortality. Using a laboratory analogue paradigm, the present study examined attachment anxiety, language use, and blood pressure (BP) reactivity among 119 (n = 43 men, 76 women) recently separated adults who were asked to mentally reflect on their relationship history and separation experience. We created a language use composite of verbal immediacy from participants' stream-of-consciousness recordings about their separation experience as a behavioral index of attachment-related hyperactivation. Verbal immediacy moderated the association between attachment anxiety and BP at the beginning of a divorce-specific activation task. Participants reporting high attachment anxiety who discussed their separation in a first-person, present-oriented and highly engaged manner evidenced the highest levels of BP at the start of the divorce-specific task. Results provide a deeper understanding of the association between marital dissolution and health and suggest that verbal immediacy may be a useful behavioral index of hyperactivating coping strategies.

Conflict Resolution Performance in an Experimental Study of En Route Free Maneuvering Operations

NASA Technical Reports Server (NTRS)

Doble, Nathan A.; Barhydt, Richard; Hitt, James M., II

2005-01-01

NASA has developed a far-term air traffic management concept, termed Distributed Air/Ground Traffic Management (DAG-TM). One component of DAG-TM, En Route Free Maneuvering, allows properly trained flight crews of equipped autonomous aircraft to assume responsibility for separation from other autonomous aircraft and from Instrument Flight Rules (IFR) aircraft. Ground-based air traffic controllers continue to separate IFR traffic and issue flow management constraints to all aircraft. To examine En Route Free Maneuvering operations, a joint human-in-the-loop experiment was conducted in summer 2004 at the NASA Ames and Langley Research Centers. Test subject pilots used desktop flight simulators to resolve traffic conflicts and adhere to air traffic flow constraints issued by subject controllers. The experimental airspace integrated both autonomous and IFR aircraft at varying traffic densities. This paper presents a subset of the En Route Free Maneuvering experimental results, focusing on airborne and ground-based conflict resolution, and the effects of increased traffic levels on the ability of pilots and air traffic controllers to perform this task. The results show that, in general, increases in autonomous traffic do not significantly impact conflict resolution performance. In addition, pilot acceptability of autonomous operations remains high throughout the range of traffic densities studied. Together with previously reported findings, these results continue to support the feasibility of the En Route Free Maneuvering component of DAG-TM.

Electrolytic cell. [For separating anolyte and catholyte

DOEpatents

Bullock, J.S.; Hale, B.D.

1984-09-14

An apparatus is described for the separation of the anolyte and the catholyte during electrolysis. The electrolyte flows through an electrolytic cell between the oppositely charged electrodes. The cell is equipped with a wedge-shaped device, the tapered end being located between the electrodes on the effluent side of the cell. The wedge diverts the flow of the electrolyte to either side of the wedge, substantially separating the anolyte and the catholyte.

Life sciences payload definition and integration study, task C and D. Volume 2: Payload definition, integration, and planning studies

NASA Technical Reports Server (NTRS)

1973-01-01

The Life Sciences Payload Definition and Integration Study was composed of four major tasks. Tasks A and B, the laboratory definition phase, were the subject of prior NASA study. The laboratory definition phase included the establishment of research functions, equipment definitions, and conceptual baseline laboratory designs. These baseline laboratories were designated as Maxi-Nom, Mini-30, and Mini-7. The outputs of Tasks A and B were used by the NASA Life Sciences Payload Integration Team to establish guidelines for Tasks C and D, the laboratory integration phase of the study. A brief review of Tasks A and B is presented provide background continuity. The tasks C and D effort is the subject of this report. The Task C effort stressed the integration of the NASA selected laboratory designs with the shuttle sortie module. The Task D effort updated and developed costs that could be used by NASA for preliminary program planning.

Job Language Performance Requirements for MOS 13B, Cannon Crewman. Volume I & II.

DTIC Science & Technology

1982-10-01

COMPOUND :. Two or more sentences joined by: -1. Coordinating conjunction Explain the task and ask the trainees if they understand the task, end the...protective equipment belt loops boots closures )utton boot socks gas flap button )uttornhole fastened impregnated socks -lothing fastener knitted cuffs...liner t~seiuble it over performing. .. .duties protective ovtrboots )loves primary duties protective socks hours protective clothing shirt liner .nside

Algorithm for designing smart factory Industry 4.0

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The designing task of production division of the Industry 4.0 item designing company is being studied. The authors proposed an algorithm, which is based on the modified V L Volkovich method. This algorithm allows generating options how to arrange the production with robotized technological equipment functioning in the automatic mode. The optimization solution of the multi-criteria task for some additive criteria is the base of the algorithm.

A Designer’s Guide to Human Performance Modelling (La Modelisation des Performances Humaines: Manuel du Concepteur).

DTIC Science & Technology

1998-12-01

failure detection, monitoring, and decision making.) moderator function. Originally, the output from these One of the best known OCM implementations, the...imposed by the tasks themselves, the information and equipment provided, the task environment, operator skills and experience, operator strategies , the...problem-solving situation, including the toward failure.) knowledge necessary to generate the right problem- solving strategies , the attention that

A Novel Adjustable Concept for Permeable Gas/Vapor Protective Clothing: Balancing Protection and Thermal Strain.

PubMed

Bogerd, Cornelis Peter; Langenberg, Johannes Pieter; DenHartog, Emiel A

2018-02-13

Armed forces typically have personal protective clothing (PPC) in place to offer protection against chemical, biological, radiological and nuclear (CBRN) agents. The regular soldier is equipped with permeable CBRN-PPC. However, depending on the operational task, these PPCs pose too much thermal strain to the wearer, which results in a higher risk of uncompensable heat stress. This study investigates the possibilities of adjustable CBRN-PPC, consisting of different layers that can be worn separately or in combination with each other. This novel concept aims to achieve optimization between protection and thermal strain during operations. Two CBRN-PPC (protective) layers were obtained from two separate manufacturers: (i) a next-to-skin (NTS) and (ii) a low-burden battle dress uniform (protective BDU). In addition to these layers, a standard (non-CBRN protective) BDU (sBDU) was also made available. The effect of combining clothing layers on the levels of protection were investigated with a Man-In-Simulant Test. Finally, a mechanistic numerical model was employed to give insight into the thermal burden of the evaluated CBRN-PPC concepts. Combining layers results in substantially higher protection that is more than the sum of the individual layers. Reducing the airflow on the protective layer closest to the skin seems to play an important role in this, since combining the NTS with the sBDU also resulted in substantially higher protection. As expected, the thermal strain posed by the different clothing layer combinations decreases as the level of protection decreases. This study has shown that the concept of adjustable protection and thermal strain through multiple layers of CBRN-PPC works. Adjustable CBRN-PPC allows for optimization of the CBRN-PPC in relation to the threat level, thermal environment, and tasks at hand in an operational setting. © The Author(s) 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Separate mechanisms for magnitude and order processing in the spatial-numerical association of response codes (SNARC) effect: The strange case of musical note values.

PubMed

Prpic, Valter; Fumarola, Antonia; De Tommaso, Matteo; Luccio, Riccardo; Murgia, Mauro; Agostini, Tiziano

2016-08-01

The spatial-numerical association of response codes (SNARC) effect is considered an evidence of the association between numbers and space, with faster left key-press responses to small numbers and faster right key-press responses to large numbers. We examined whether visually presented note values produce a SNARC-like effect. Differently from numbers, note values are represented as a decreasing left-to-right progression, allowing us to disambiguate the contribution of order and magnitude in determining the direction of the effect. Musicians with formal education performed a note value comparison in Experiment 1 (direct task), a line orientation judgment in Experiment 2 (indirect task), and a detection task in Experiment 3 (indirect task). When note values were task relevant (direct task), participants responded faster to large note values with the left key-press, and vice versa. Conversely, when note values were task irrelevant (indirect tasks), the direction of this association was reversed. This evidence suggests the existence of separate mechanisms underlying the SNARC effect. Namely, an Order-Related Mechanism (ORM) and a Magnitude-Related Mechanism (MRM) that are revealed by different task demands. Indeed, according to a new model we proposed, ordinal and magnitude related information appears to be preferentially involved in direct and indirect tasks, respectively. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Rankings, Standards, and Competition: Task vs. Scale Comparisons

ERIC Educational Resources Information Center

Garcia, Stephen M.; Tor, Avishalom

2007-01-01

Research showing how upward social comparison breeds competitive behavior has so far conflated local comparisons in "task" performance (e.g. a test score) with comparisons on a more general "scale" (i.e. an underlying skill). Using a ranking methodology (Garcia, Tor, & Gonzalez, 2006) to separate task and scale comparisons, Studies 1-2 reveal that…

Instructional Guidance in Reciprocal Peer Tutoring With Task Cards

ERIC Educational Resources Information Center

Iserbyt, Peter; Elen, Jan; Behets, Daniel

2010-01-01

This article addresses the issue of instructional guidance in reciprocal peer tutoring with task cards as learning tools. Eighty-six Kinesiology students (age 17-19 years) were randomized across four reciprocal peer tutoring settings, differing in quality and quantity of guidance, to learn Basic Life Support (BLS) with task cards. The separate and…

Framing matters: Effects of framing on older adults’ exploratory decision-making

PubMed Central

Cooper, Jessica A.; Blanco, Nathaniel; Maddox, W. Todd

2016-01-01

We examined framing effects on exploratory decision-making. In Experiment 1 we tested older and younger adults in two decision-making tasks separated by one week, finding that older adults’ decision-making performance was preserved when maximizing gains, but declined when minimizing losses. Computational modeling indicates that younger adults in both conditions, and older adults in gains-maximization, utilized a decreasing threshold strategy (which is optimal), but older adults in losses were better fit by a fixed-probability model of exploration. In Experiment 2 we examined within-subjects behavior in older and younger adults in the same exploratory decision-making task, but without a time separation between tasks. We replicated the older adult disadvantage in loss-minimization from Experiment 1, and found that the older adult deficit was significantly reduced when the loss-minimization task immediately followed the gains-maximization task. We conclude that older adults’ performance in exploratory decision-making is hindered when framed as loss-minimization, but that this deficit is attenuated when older adults can first develop a strategy in a gains-framed task. PMID:27977218

Framing matters: Effects of framing on older adults' exploratory decision-making.

PubMed

Cooper, Jessica A; Blanco, Nathaniel J; Maddox, W Todd

2017-02-01

We examined framing effects on exploratory decision-making. In Experiment 1 we tested older and younger adults in two decision-making tasks separated by one week, finding that older adults' decision-making performance was preserved when maximizing gains, but it declined when minimizing losses. Computational modeling indicates that younger adults in both conditions, and older adults in gains maximization, utilized a decreasing threshold strategy (which is optimal), but older adults in losses were better fit by a fixed-probability model of exploration. In Experiment 2 we examined within-subject behavior in older and younger adults in the same exploratory decision-making task, but without a time separation between tasks. We replicated the older adult disadvantage in loss minimization from Experiment 1 and found that the older adult deficit was significantly reduced when the loss-minimization task immediately followed the gains-maximization task. We conclude that older adults' performance in exploratory decision-making is hindered when framed as loss minimization, but that this deficit is attenuated when older adults can first develop a strategy in a gains-framed task. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Child care and parenting issues for the young stroke survivor.

PubMed

Culler, Kathleen Hilko; Jasch, Christine; Scanlan, Susan

1994-03-01

Parenting is a complex and challenging task for any parent and it becomes even more complicated for an individual who experiences a disability. Literature addressing the parenting role for individuals who have experienced a stroke is limited. This article provides information on evaluation tools available for assessing an individual's ability to perform child care tasks and intervention strategies such as adaptive techniques and equipment for maximizing ability and promoting safe performance of child care tasks by the individual who has experienced a stroke. Product and literature resources that can be used by either the health professional or the parent with a stroke to facilitate parenting and child care task performance are included.

The effect of equipment proximity on safe performance in a manufacturing setting.

PubMed

Abellon, O Elizabeth; Wilder, David A

2014-01-01

We examined the effect of equipment proximity on the safe performance of 3 assembly workers in a manufacturing setting. After a baseline period in which protective eyewear was kept 6.1 m from employee workstations, task clarification was used to inform participants to wear their eyewear while they worked. Next, the eyewear was moved to 1.5 m from employee workstations. After a return to the 6.1-m condition, the eyewear was again positioned 1.5 m from workstations. Results indicate that task clarification alone was ineffective, but safe performance increased when eyewear was stored in close proximity to employees. A social validity measure suggested that safe performance among the employees increased to levels comparable to that of an exemplary employee. © Society for the Experimental Analysis of Behavior.

[The "Mining Rescue System and Mine Fires" Working Group. Tasks, results, future activities].

PubMed

Coenders, A

1983-01-01

The president of the working party presents details of its principal tasks in the past and in the present time. These can be summed up in a study of the problems mentioned below and the subsequent elaboration of recommendations for the benefit of the governments, guidelines, information reports and research proposals. The principal problems that were or are still under study are: --prevention of fires: shaft equipment, hydraulic fluids, belt conveyors, . . .; --detection of mine fires and spontaneous combustion; --fighting of mine fires: shaft fires, construction of stoppings, openings and recovering of fire zones, . . .; --coordination and rescue equipment: escape and rescue breathing apparatus, flameproof clothing, rescue of trapped miners; --stabilization of ventilation in the event of fire, . . . The speaker stresses the importance of the information exchange and the atmosphere of fellowship and solidarity that prevails in the working party.

Oral Motor Abilities Are Task Dependent: A Factor Analytic Approach to Performance Rate.

PubMed

Staiger, Anja; Schölderle, Theresa; Brendel, Bettina; Bötzel, Kai; Ziegler, Wolfram

2017-01-01

Measures of performance rates in speech-like or volitional nonspeech oral motor tasks are frequently used to draw inferences about articulation rate abnormalities in patients with neurologic movement disorders. The study objective was to investigate the structural relationship between rate measures of speech and of oral motor behaviors different from speech. A total of 130 patients with neurologic movement disorders and 130 healthy subjects participated in the study. Rate data was collected for oral reading (speech), rapid syllable repetition (speech-like), and rapid single articulator movements (nonspeech). The authors used factor analysis to determine whether the different rate variables reflect the same or distinct constructs. The behavioral data were most appropriately captured by a measurement model in which the different task types loaded onto separate latent variables. The data on oral motor performance rates show that speech tasks and oral motor tasks such as rapid syllable repetition or repetitive single articulator movements measure separate traits.

Early Life Manipulations Alter Learning and Memory in Rats

PubMed Central

Kosten, Therese A; Kim, Jeansok J; Lee, Hongjoo J.

2012-01-01

Much research shows early life manipulations have enduring behavioral, neural, and hormonal effects. However, findings of learning and memory performance vary widely across studies. We reviewed studies in which pre-weaning rat pups were exposed to stressors and tested on learning and memory tasks in adulthood. Tasks were classified as aversive conditioning, inhibitory learning, or spatial/relational memory. Variables of duration, type, and timing of neonatal manipulation and sex and strain of animals were examined to determine if any predict enhanced or impaired performance. Brief separations enhanced and prolonged separations impaired performance on spatial/relational tasks. Performance was impaired in aversive conditioning and enhanced in inhibitory learning tasks regardless of manipulation duration. Opposing effects on performance for spatial/relational memory also depended upon timing of manipulation. Enhanced performance was likely if the manipulation occurred during postnatal week 3 but performance was impaired if it was confined to the first two postnatal weeks. Thus, the relationship between early life experiences and adulthood learning and memory performance is multifaceted and decidedly task-dependent. PMID:22819985

Applying Separations Science to Waste Problems.

DTIC Science & Technology

1998-01-01

inert cathode. Centrifugal Contactor for Processing Liquid Radioactive Waste We have developed an annular centrifugal contactor for use in liquid...radioactive waste. The CMT-designed centrifugal contactor has several advantages over other solvent-extraction equipment currently in use. It requires less...Y-12 Plant, Savannah River Site, and Oak Ridge National Laboratory. The benefits that make the centrifugal contactor the equipment of choice in the

40 CFR Appendix B2 to Subpart F of... - Performance of Refrigerant Recovery, Recycling, and/or Reclaim Equipment

Code of Federal Regulations, 2010 CFR

2010-07-01

... the pressure in the system, and by connecting a separate line between the system liquid port and the... chamber consisting of a tank with a conical-shaped bottom, a bottom port and piping for delivering refrigerant to the equipment, various ports and valves for adding refrigerant to the chamber and stirring...

40 CFR Appendix B2 to Subpart F of... - Performance of Refrigerant Recovery, Recycling, and/or Reclaim Equipment

Code of Federal Regulations, 2011 CFR

2011-07-01

... the pressure in the system, and by connecting a separate line between the system liquid port and the... chamber consisting of a tank with a conical-shaped bottom, a bottom port and piping for delivering refrigerant to the equipment, various ports and valves for adding refrigerant to the chamber and stirring...

Efficacy of commercial microwave equipment for eradication of pine wood nematodes and cerambycid larvae infesting red pine

Treesearch

Mary R. Fleming; John J. Janowiak; Jeffrey D. Kimmel; John M. Halbrendt; Leah S. Bauer; Kelli Hoover

2005-01-01

The feasibility of using commercial 2.45-GHz microwave equipment to kill cerambycid larvae and pinewood nematodes(PWN) [Bursaphelenchus xylophilus (Steiner and Buhrer) Nickle] infesting lumber was investigated. Research goals were to test a system of separating green material into moisture content(MC)ranges and to determine the feasibility of using...

Experimental equipment for an advanced ISOL facility[Isotope Separation On-Line Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baktash, C.; Lee, I.Y.; Rehm, K.E.

This report summarizes the proceedings and recommendations of the Workshop on the Experimental Equipment for an Advanced ISOL Facility which was held at Lawrence Berkeley National Laboratory on July 22--25, 1998. The purpose of this workshop was to discuss the performance requirements, manpower and cost estimates, as well as a schedule of the experimental equipment needed to fully exploit the new physics which can be studied at an advanced ISOL facility. An overview of the new physics opportunities that would be provided by such a facility has been presented in the White Paper that was issued following the Columbus Meeting.more » The reactions and experimental techniques discussed in the Columbus White Paper served as a guideline for the formulation of the detector needs at the Berkeley Workshop. As outlined a new ISOL facility with intense, high-quality beams of radioactive nuclei would provide exciting new research opportunities in the areas of: the nature of nucleonic matter; the origin of the elements; and tests of the Standard Model. After an introductory section, the following equipment is discussed: gamma-ray detectors; recoil separators; magnetic spectrographs; particle detectors; targets; and apparatus using non-accelerated beams.« less

Check-off logs for routine equipment maintenance.

PubMed

Brewster, M A; Carver, P H; Randolph, B

1995-12-01

The regulatory requirement for appropriate routine instrument maintenance documentation is approached by laboratories in numerous ways. Standard operating procedures (SOPs) may refer to maintenance listed in instrument manuals, may indicate "periodic" performance of an action, or may indicate specific tasks to be performed at certain frequencies. The Quality Assurance Unit (QAU) task of assuring the performance of these indicated maintenance tasks can be extremely laborious if these records are merged with other analysis records. Further, the lack of written maintenance schedules often leads to omission of infrequently performed tasks. We recommend creation of routine maintenance check-off logs for instruments with tasks grouped by frequency of expected performance. Usage of such logs should result in better laboratory compliance with SOPs and the compliance can be readily monitored by QAU or by regulatory agencies.

Molecular Genetic Equipment for Improved Inventory and Monitoring of Species of Conservation Concern on Department of Defense Lands

DTIC Science & Technology

2015-11-18

University of Idaho was tasked with designing methods to monitor species of concern on DoD lands as part of four DoD grants. With the funds granted we were...Approved for Public Release; Distribution Unlimited Final Report: Molecular Genetic Equipment for Improved Inventory and Monitoring of Species of...Monitoring of Species of Conservation Concern on Department of Defense Lands Report Title The Laboratory for Ecological, Evolutionary and Conservation

Self-Esteem and Self-in-Relation Identity among Mexican American Adolescents.

ERIC Educational Resources Information Center

Perez, Gabriela L.; Russell, Todd T.

Traditional theories of development view separation and individuation as primary tasks of adolescents; the self-in-relation framework, however, argues that the autonomous and separate self-paradigm does not describe female development. Current research suggests that self-esteem arises from subscribing to separate self-definitions for males and…

Design guidelines for remotely maintainable equipment

NASA Technical Reports Server (NTRS)

Clarke, Margaret M.; Manouchehri, Davoud

1988-01-01

The quantity and complexity of on-orbit assets will increase significantly over the next decade. Maintaining and servicing these costly assets represent a difficult challenge. Three general methods are proposed to maintain equipment while it is still in orbit: an extravehicular activity (EVA) crew can perform the task in an unpressurized maintenance area outside any space vehicle; an intravehicular activity (IVA) crew can perform the maintenance in a shirt sleeve environment, perhaps at a special maintenance work station in a space vehicle; or a telerobotic manipulator can perform the maintenance in an unpressurized maintenance area at a distance from the crew (who may be EVA, IVA, or on the ground). However, crew EVA may not always be possible; the crew may have other demands on their time that take precedence. In addition, the orbit of the tasks themselves may be impossible for crew entry. Also crew IVA may not always be possible as option for equipment maintenance. For example, the equipment may be too large to fit through the vehicle airlock. Therefore, in some circumstances, the third option, telerobotic manipulation, may be the only feasible option. Telerobotic manipulation has, therefore, an important role for on-orbit maintenance. It is not only used for the reasons outlined above, but also used in some cases as backup to the EVA crew in an orbit that they can reach.

Lunar surface operations. Volume 3: Robotic arm for lunar surface vehicle

NASA Technical Reports Server (NTRS)

Shields, William; Feteih, Salah; Hollis, Patrick

1993-01-01

A robotic arm for a lunar surface vehicle that can help in handling cargo and equipment, and remove obstacles from the path of the vehicle is defined as a support to NASA's intention to establish a lunar based colony by the year 2010. Its mission would include, but not limited to the following: exploration, lunar sampling, replace and remove equipment, and setup equipment (e.g. microwave repeater stations). Performance objectives for the robotic arm include a reach of 3 m, accuracy of 1 cm, arm mass of 100 kg, and lifting capability of 50 kg. The end effectors must grip various sizes and shapes of cargo; push, pull, turn, lift, or lower various types of equipment; and clear a path on the lunar surface by shoveling, sweeping aside, or gripping the obstacle present in the desired path. The arm can safely complete a task within a reasonable amount of time; the actual time is dependent upon the task to be performed. The positioning of the arm includes a manual backup system such that the arm can be safely stored in case of failure. Remote viewing and proximity and positioning sensors are incorporated in the design of the arm. The following specific topic are addressed in this report: mission and requirements, system design and integration, mechanical structure, modified wrist, structure-to-end-effector interface, end-effectors, and system controls.

Study on the shipboard radar reconnaissance equipment azimuth benchmark method

NASA Astrophysics Data System (ADS)

Liu, Zhenxing; Jiang, Ning; Ma, Qian; Liu, Songtao; Wang, Longtao

2015-10-01

The future naval battle will take place in a complex electromagnetic environment. Therefore, seizing the electromagnetic superiority has become the major actions of the navy. Radar reconnaissance equipment is an important part of the system to obtain and master battlefield electromagnetic radiation source information. Azimuth measurement function is one of the main function radar reconnaissance equipments. Whether the accuracy of direction finding meets the requirements, determines the vessels successful or not active jamming, passive jamming, guided missile attack and other combat missions, having a direct bearing on the vessels combat capabilities . How to test the performance of radar reconnaissance equipment, while affecting the task as little as possible is a problem. This paper, based on radar signal simulator and GPS positioning equipment, researches and experiments on one new method, which povides the azimuth benchmark required by the direction-finding precision test anytime anywhere, for the ships at jetty to test radar reconnaissance equipment performance in direction-finding. It provides a powerful means for the naval radar reconnaissance equipments daily maintenance and repair work[1].

Simulator for Testing Spacecraft Separation Devices

NASA Technical Reports Server (NTRS)

Johnston, Nick; Gaines, Joe; Bryan, Tom

2006-01-01

A report describes the main features of a system for testing pyrotechnic and mechanical devices used to separate spacecraft and modules of spacecraft during flight. The system includes a spacecraft simulator [also denoted a large mobility base (LMB)] equipped with air thrusters, sensors, and data-acquisition equipment. The spacecraft simulator floats on air bearings over an epoxy-covered concrete floor. This free-flotation arrangement enables simulation of motion in outer space in three degrees of freedom: translation along two orthogonal horizontal axes and rotation about a vertical axis. The system also includes a static stand. In one application, the system was used to test a bolt-retraction system (BRS) intended for separation of the lifting-body and deorbit-propulsion stages of the X- 38 spacecraft. The LMB was connected via the BRS to the static stand, then pyrotechnic devices that actuate the BRS were fired. The separation distance and acceleration were measured. The report cites a document, not yet published at the time of reporting the information for this article, that is said to present additional detailed information.

NBS (National Bureau of Standards): Materials measurements

NASA Technical Reports Server (NTRS)

Manning, J. R.

1985-01-01

NBS work for NASA in support of NASA's Microgravity Science and Applications Program under NASA Government Order H-27954B (Properties of Electronic Materials) covering the period April 1, 1984 to March 31, 1985 is described. The work has been carried out in three independent tasks: Task 1--Surface Tensions and Their Variations with Temperature and Impurities; Task 2--Convention during Unidirectional Solidification; Task 3--Measurement of High Temperature Thermodynamic Properties. The results for each task are given separately in the body of the report.

Neural substrates of cognitive switching and inhibition in a face processing task.

PubMed

Piguet, Camille; Sterpenich, Virginie; Desseilles, Martin; Cojan, Yann; Bertschy, Gilles; Vuilleumier, Patrik

2013-11-15

We frequently need to change our current occupation, an operation requiring additional effortful cognitive demands. Switching from one task to another may involve two distinct processes: inhibition of the previously relevant task-set, and initiation of a new one. Here we tested whether these two processes are underpinned by separate neural substrates, and whether they differ depending on the nature of the task and the emotional content of stimuli. We used functional magnetic resonance imaging in healthy human volunteers who categorize emotional faces according to three different judgment rules (color, gender, or emotional expression). Our paradigm allowed us to separate neural activity associated with inhibition and switching based on the sequence of the tasks required on successive trials. We found that the bilateral medial superior parietal lobule and left intraparietal sulcus showed consistent activation during switching regardless of the task. On the other hand, no common region was activated (or suppressed) as a consequence of inhibition across all tasks. Rather, task-specific effects were observed in brain regions that were more activated when switching to a particular task but less activated after inhibition of the same task. In addition, compared to other conditions, the emotional task elicited a similar switching cost but lower inhibition cost, accompanied by selective decrease in the anterior cingulate cortex when returning to this task shortly after inhibiting it. These results demonstrate that switching relies on domain-general processes mediated by postero-medial parietal areas, engaged across all tasks, but also provide novel evidence that task inhibition produces domain-specific decreases as a function of particular task demands, with only the latter inhibition component being modulated by emotional information. Copyright © 2013 Elsevier Inc. All rights reserved.

Stroop tasks reveal abnormal selective attention among psychopathic offenders.

PubMed

Hiatt, Kristina D; Schmitt, William A; Newman, Joseph P

2004-01-01

Selective attention among offenders with psychopathy was investigated using 3 Stroop paradigms: a standard color-word (CW) Stroop, a picture-word (PW) Stroop, and a color-word Stroop in which the word and color were spatially separated (separated CW). Consistent with "overselective" attention, offenders with psychopathy displayed reduced Stroop interference on the separated CW and PW tasks relative to offenders who were not psychopathic. However, offenders with psychopathy displayed normal Stroop interference on the standard CW Stroop. Further, the reduced interference of offenders with psychopathy on the separated CW Stroop was accompanied by normal facilitation. These findings suggest a circumscribed attentional deficit in psychopathy that hinders the use of unattended information that is (a) not integrated with deliberately attended information and (b) not compatible with current goal-directed behavior. ((c) 2004 APA, all rights reserved)

Research on a dynamic workflow access control model

NASA Astrophysics Data System (ADS)

Liu, Yiliang; Deng, Jinxia

2007-12-01

In recent years, the access control technology has been researched widely in workflow system, two typical technologies of that are RBAC (Role-Based Access Control) and TBAC (Task-Based Access Control) model, which has been successfully used in the role authorizing and assigning in a certain extent. However, during the process of complicating a system's structure, these two types of technology can not be used in minimizing privileges and separating duties, and they are inapplicable when users have a request of frequently changing on the workflow's process. In order to avoid having these weakness during the applying, a variable flow dynamic role_task_view (briefly as DRTVBAC) of fine-grained access control model is constructed on the basis existed model. During the process of this model applying, an algorithm is constructed to solve users' requirements of application and security needs on fine-grained principle of privileges minimum and principle of dynamic separation of duties. The DRTVBAC model is implemented in the actual system, the figure shows that the task associated with the dynamic management of role and the role assignment is more flexible on authority and recovery, it can be met the principle of least privilege on the role implement of a specific task permission activated; separated the authority from the process of the duties completing in the workflow; prevented sensitive information discovering from concise and dynamic view interface; satisfied with the requirement of the variable task-flow frequently.

The location discrimination reversal task in mice is sensitive to deficits in performance caused by aging, pharmacological and other challenges.

PubMed

Graf, Radka; Longo, Jami L; Hughes, Zoë A

2018-06-01

Deficits in hippocampal-mediated pattern separation are one aspect of cognitive function affected in schizophrenia (SZ) or Alzheimer's disease (AD). To develop novel therapies, it is beneficial to explore this specific aspect of cognition preclinically. The location discrimination reversal (LDR) task is a hippocampal-dependent operant paradigm that evaluates spatial learning and cognitive flexibility using touchscreens. Here we assessed baseline performance as well as multimodal disease-relevant manipulations in mice. Mice were trained to discriminate between the locations of two images where the degree of separation impacted performance. Administration of putative pro-cognitive agents was unable to improve performance at narrow separation. Furthermore, a range of disease-relevant manipulations were characterized to assess whether performance could be impaired and restored. Pertinent to the cholinergic loss in AD, scopolamine (0.1 mg/kg) produced a disruption in LDR, which was attenuated by donepezil (1 mg/kg). Consistent with NMDA hypofunction in cognitive impairment associated with SZ, MK-801 (0.1 mg/kg) also disrupted performance; however, this deficit was not modified by rolipram. Microdeletion of genes associated with SZ (22q11) resulted in impaired performance, which was restored by rolipram (0.032 mg/kg). Since aging and inflammation affect cognition and are risk factors for AD, these aspects were also evaluated. Aged mice were slower to acquire the task than young mice and did not reach the same level of performance. A systemic inflammatory challenge (lipopolysaccharide (LPS), 1 mg/kg) produced prolonged (7 days) deficits in the LDR task. These data suggest that LDR task is a valuable platform for evaluating disease-relevant deficits in pattern separation and offers potential for identifying novel therapies.

Effect of basic laparoscopic skills courses on essential knowledge of equipment.

PubMed

van Hove, P Diederick; Verdaasdonk, Emiel G G; van der Harst, Erwin; Jansen, Frank Willem; Dankelman, Jenny; Stassen, Laurents P S

2012-12-01

This study aims to evaluate the effect of laparoscopic skills courses on the knowledge of laparoscopic equipment. A knowledge test on laparoscopic equipment was developed, and participants of 3 separate basic laparoscopic skills courses in the Netherlands completed the test at the beginning and end of these courses. All lectures and demonstrations during the courses were recorded on video to assess the matching of its contents with the items in the test. As a reference, the test was also completed by a group of laparoscopic experts by e-mail. In total, 36 participants (64.3%) completed both the pretest and posttest. Overall, the mean test score improved from 60.4% of the maximum possible score for the pretest to 68.4% for the posttest. There were no significant differences in test scores between the 3 separate courses. However, the actual content varied among the courses. The correspondence of the test items with the course content varied from 47% to 69%. Although 30% of the participants had already received training for laparoscopic equipment in their own hospital, 92.5% wanted to receive more training. 28 experts completed the test with a mean score of 75.7%, which was significantly better than the posttest score of the course participants. The laparoscopic skills courses evaluated in this study had a modest positive effect on the acquisition of knowledge about laparoscopic equipment. Variance exists among their contents.

A fractionation of the physiological burden of the personal protective equipment worn by firefighters.

PubMed

Taylor, Nigel A S; Lewis, Michael C; Notley, Sean R; Peoples, Gregory E

2012-08-01

Load carriage increases physiological strain, reduces work capacity and elevates the risk of work-related injury. In this project, the separate and combined physiological consequences of wearing the personal protective equipment used by firefighters were evaluated. The overall impact upon performance was first measured in 20 subjects during a maximal, job-related obstacle course trial and an incremental treadmill test to exhaustion (with and without protective equipment). The fractional contributions of the thermal protective clothing, helmet, breathing apparatus and boots were then separately determined during steady-state walking (4.8 km h(-1), 0% gradient) and bench stepping (20 cm at 40 steps min(-1)). The protective equipment reduced exercise tolerance by 56% on a treadmill, with the ambulatory oxygen consumption reserve (peak minus steady-state walking) being 31% lower. For the obstacle course, performance declined by 27%. Under steady-state conditions, the footwear exerted the greatest relative metabolic impact during walking and bench stepping, being 8.7 and 6.4 times greater per unit mass than the breathing apparatus. Indeed, the relative influence of the clothing on oxygen cost was at least three times that of the breathing apparatus. Therefore, the most efficient way to reduce the physiological burden of firefighters' protective equipment, and thereby increase safety, would be to reduce the mass of the boots and thermal protective clothing.

VAXELN Experimentation: Programming a Real-Time Periodic Task Dispatcher Using VAXELN Ada 1.1

DTIC Science & Technology

1987-11-01

synchronization to the SQM and VAXELN semaphores. Based on real-time scheduling theory, the optimal rate-monotonic scheduling algorithm [Lui 73...schedulability test based on the rate-monotonic algorithm , namely task-lumping [Sha 871, was necessary to cal- culate the theoretically expected schedulability...8217 Guide Digital Equipment Corporation, Maynard, MA, 1986. [Lui 73] Liu, C.L., Layland, J.W. Scheduling Algorithms for Multi-programming in a Hard-Real-Time

A Heavy-Duty Jack for a Giant Task

NASA Image and Video Library

2010-11-03

A major refurbishment of the giant Mars antenna at NASA Deep Space Network Goldstone Deep Space Communications Complex in California Mojave Desert required workers to jack up millions of pounds of delicate scientific equipment.

Forecasting bicycle and pedestrian usage and research data collection equipment.

DOT National Transportation Integrated Search

2010-01-01

During recent years, community leaders and transportation professionals in the Austin area have increased their interest in pedestrian and bicycle travel. Advocacy groups, task forces, bicycling clubs, and volunteer organizations encourage government...

Computer-assisted Crystallization.

ERIC Educational Resources Information Center

Semeister, Joseph J., Jr.; Dowden, Edward

1989-01-01

To avoid a tedious task for recording temperature, a computer was used for calculating the heat of crystallization for the compound sodium thiosulfate. Described are the computer-interfacing procedures. Provides pictures of laboratory equipment and typical graphs from experiments. (YP)

Task conflict effect in task switching.

PubMed

Braverman, Ami; Meiran, Nachshon

2010-11-01

A part of action preparation is deciding what the relevant task is. This task-decision process is conceptually separate from response selection. To show this, the authors manipulated task conflict in a spatial task-switching paradigm, using conflict stimuli that appeared during trials with univalent targets (affording 1 task). The conflict stimuli afforded task identity because they were used as task cues with bivalent targets (affording 2 tasks) that were intermixed with the univalent targets. Thus, for univalent targets, irrelevant stimuli either caused low task conflict or high task conflict. In three experiments, the authors found poorer performance in high task conflict trials than in low task conflict trials. Task conflict was introduced during target appearance (Experiment 1) or task preparation (Experiments 2 and 3). In the latter case, the task conflict effect decreased with increasing task preparation time showing that task preparation involves task decision.

Hot conditioning equipment conceptual design report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradshaw, F.W., Westinghouse Hanford

1996-08-06

This report documents the conceptual design of the Hot Conditioning System Equipment. The Hot conditioning System will consist of two separate designs: the Hot Conditioning System Equipment; and the Hot Conditioning System Annex. The Hot Conditioning System Equipment Design includes the equipment such as ovens, vacuum pumps, inert gas delivery systems, etc.necessary to condition spent nuclear fuel currently in storage in the K Basins of the Hanford Site. The Hot Conditioning System Annex consists of the facility of house the Hot Conditioning System. The Hot Conditioning System will be housed in an annex to the Canister Storage Building. The Hotmore » Conditioning System will consist of pits in the floor which contain ovens in which the spent nuclear will be conditioned prior to interim storage.« less

Research on the use of space resources

NASA Technical Reports Server (NTRS)

Carroll, W. F. (Editor)

1983-01-01

The second year of a multiyear research program on the processing and use of extraterrestrial resources is covered. The research tasks included: (1) silicate processing, (2) magma electrolysis, (3) vapor phase reduction, and (4) metals separation. Concomitant studies included: (1) energy systems, (2) transportation systems, (3) utilization analysis, and (4) resource exploration missions. Emphasis in fiscal year 1982 was placed on the magma electrolysis and vapor phase reduction processes (both analytical and experimental) for separation of oxygen and metals from lunar regolith. The early experimental work on magma electrolysis resulted in gram quantities of iron (mixed metals) and the identification of significant anode, cathode, and container problems. In the vapor phase reduction tasks a detailed analysis of various process concepts led to the selection of two specific processes designated as ""Vapor Separation'' and ""Selective Ionization.'' Experimental work was deferred to fiscal year 1983. In the Silicate Processing task a thermophysical model of the casting process was developed and used to study the effect of variations in material properties on the cooling behavior of lunar basalt.

Methods to predict seasonal high water table (SHGWT) : final report.

DOT National Transportation Integrated Search

2017-04-03

The research study was sectioned into 5 separate tasks. Task 1 included defining the seasonal high ground water table (SHGWT); describing : methods and techniques used to determine SHGWTs; identify problems associated with estimating SHGWT conditions...

Stable Scalp EEG Spatiospectral Patterns Across Paradigms Estimated by Group ICA.

PubMed

Labounek, René; Bridwell, David A; Mareček, Radek; Lamoš, Martin; Mikl, Michal; Slavíček, Tomáš; Bednařík, Petr; Baštinec, Jaromír; Hluštík, Petr; Brázdil, Milan; Jan, Jiří

2018-01-01

Electroencephalography (EEG) oscillations reflect the superposition of different cortical sources with potentially different frequencies. Various blind source separation (BSS) approaches have been developed and implemented in order to decompose these oscillations, and a subset of approaches have been developed for decomposition of multi-subject data. Group independent component analysis (Group ICA) is one such approach, revealing spatiospectral maps at the group level with distinct frequency and spatial characteristics. The reproducibility of these distinct maps across subjects and paradigms is relatively unexplored domain, and the topic of the present study. To address this, we conducted separate group ICA decompositions of EEG spatiospectral patterns on data collected during three different paradigms or tasks (resting-state, semantic decision task and visual oddball task). K-means clustering analysis of back-reconstructed individual subject maps demonstrates that fourteen different independent spatiospectral maps are present across the different paradigms/tasks, i.e. they are generally stable.

Different Ways to Cue a Coherent Memory System: A Theory for Episodic, Semantic, and Procedural Tasks.

ERIC Educational Resources Information Center

Humphreys, Michael S.; And Others

1989-01-01

An associative theory of memory is proposed to serve as a counterexample to claims that dissociations among episodic, semantic, and procedural memory tasks necessitate separate memory systems. The theory is based on task analyses of matching (recognition and familiarity judgments), retrieval (cued recall), and production (free association). (TJH)

Residential Carpentry Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for nine occupations in the residential carpentry series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to…

Printing Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 10 occupations in the printing series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide space for…

Marketing Education/Business Management & Ownership Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for eight occupations in the marketing education/business management and ownership series. Each occupation is divided into 4 to 12 duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular…

Business & Office Accounting/Bookkeeping Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for five occupations in the business and office accounting/bookkeeping series. Each occupation is divided into four to six duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has…

Banking and Financial Services Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for five occupations in the banking and financial services series. Each occupation is divided into seven or eight duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been…

Inactivation of Medial Prefrontal Cortex or Acute Stress Impairs Odor Span in Rats

ERIC Educational Resources Information Center

Davies, Don A.; Molder, Joel J.; Greba, Quentin; Howland, John G.

2013-01-01

The capacity of working memory is limited and is altered in brain disorders including schizophrenia. In rodent working memory tasks, capacity is typically not measured (at least not explicitly). One task that does measure working memory capacity is the odor span task (OST) developed by Dudchenko and colleagues. In separate experiments, the effects…

Business and Office Managerial Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for three occupations in the business and office managerial series. Each occupation is divided into seven duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to…

Business & Office Secretarial Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 11 occupations in the business and office secretarial series. Each occupation is divided into three to seven duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught…

Diesel Mechanics Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 11 occupations in the diesel mechanics series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide…

Auto Mechanics Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for eight occupations in the auto mechanics series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide…

Welding Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for six occupations in the welding series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide space for…

Fashion Merchandising Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for seven occupations in the fashion merchandising series. Each occupation is divided into 6 to 15 duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to…

Systemic lipopolysaccharide administration impairs retrieval of context-object discrimination, but not spatial, memory: Evidence for selective disruption of specific hippocampus-dependent memory functions during acute neuroinflammation

PubMed Central

Czerniawski, Jennifer; Miyashita, Teiko; Lewandowski, Gail; Guzowski, John F.

2014-01-01

Neuroinflammation is implicated in impairments in neuronal function and cognition that arise with aging, trauma, and/or disease. Therefore, understanding the underlying basis of the effect of immune system activation on neural function could lead to therapies for treating cognitive decline. Although neuroinflammation is widely thought to preferentially impair hippocampus-dependent memory, data on the effects of cytokines on cognition are mixed. One possible explanation for these inconsistent results is that cytokines may disrupt specific neural processes underlying some forms of memory but not others. In an earlier study, we tested the effect of systemic administration of bacterial lipopolysaccharide (LPS) on retrieval of hippocampus-dependent context memory and neural circuit function in CA3 and CA1 (Czerniawski and Guzowski, 2014). Paralleling impairment in context discrimination memory, we observed changes in neural circuit function consistent with disrupted pattern separation function. In the current study we tested the hypothesis that acute neuroinflammation selectively disrupts memory retrieval in tasks requiring hippocampal pattern separation processes. Male Sprague-Dawley rats given LPS systemically prior to testing exhibited intact performance in tasks that do not require hippocampal pattern separation processes: novel object recognition and spatial memory in the water maze. By contrast, memory retrieval in a task thought to require hippocampal pattern separation, context-object discrimination, was strongly impaired in LPS-treated rats in the absence of any gross effects on exploratory activity or motivation. These data show that LPS administration does not impair memory retrieval in all hippocampus-dependent tasks, and support the hypothesis that acute neuroinflammation impairs context discrimination memory via disruption of pattern separation processes in hippocampus. PMID:25451612

Systemic lipopolysaccharide administration impairs retrieval of context-object discrimination, but not spatial, memory: Evidence for selective disruption of specific hippocampus-dependent memory functions during acute neuroinflammation.

PubMed

Czerniawski, Jennifer; Miyashita, Teiko; Lewandowski, Gail; Guzowski, John F

2015-02-01

Neuroinflammation is implicated in impairments in neuronal function and cognition that arise with aging, trauma, and/or disease. Therefore, understanding the underlying basis of the effect of immune system activation on neural function could lead to therapies for treating cognitive decline. Although neuroinflammation is widely thought to preferentially impair hippocampus-dependent memory, data on the effects of cytokines on cognition are mixed. One possible explanation for these inconsistent results is that cytokines may disrupt specific neural processes underlying some forms of memory but not others. In an earlier study, we tested the effect of systemic administration of bacterial lipopolysaccharide (LPS) on retrieval of hippocampus-dependent context memory and neural circuit function in CA3 and CA1 (Czerniawski and Guzowski, 2014). Paralleling impairment in context discrimination memory, we observed changes in neural circuit function consistent with disrupted pattern separation function. In the current study we tested the hypothesis that acute neuroinflammation selectively disrupts memory retrieval in tasks requiring hippocampal pattern separation processes. Male Sprague-Dawley rats given LPS systemically prior to testing exhibited intact performance in tasks that do not require hippocampal pattern separation processes: novel object recognition and spatial memory in the water maze. By contrast, memory retrieval in a task thought to require hippocampal pattern separation, context-object discrimination, was strongly impaired in LPS-treated rats in the absence of any gross effects on exploratory activity or motivation. These data show that LPS administration does not impair memory retrieval in all hippocampus-dependent tasks, and support the hypothesis that acute neuroinflammation impairs context discrimination memory via disruption of pattern separation processes in hippocampus. Copyright © 2014 Elsevier Inc. All rights reserved.

Whole-body vibration in heavy equipment operators of a front-end loader: role of task exposure and tire configuration with and without traction chains.

PubMed

Blood, Ryan P; Rynell, Patrik W; Johnson, Peter W

2012-12-01

This study measured whole-body vibration (WBV) exposures in front-end loader operators, and evaluated the effects of traction chains and work tasks on their WBV exposures. WBV exposures were measured and compared across three different front-end loader tire configurations: (a) stock rubber tires, (b) rubber tires with ladder chains, and (c) rubber tires with basket chains. The operators completed three distinct standardized tasks: driving on a city street, simulated plowing, and a simulated scooping and dumping task. A portable data acquisition system collected tri-axial time weighted and raw WBV data per ISO 2631-1 and 2631-5 standards. In addition, Global Positioning System (GPS) data were collected in order to compare loader speeds across tire conditions and the standardized tasks. Relative to the stock rubber tires, both types of tire chains significantly increased WBV exposures with the ladder chains having substantially higher WBV exposures compared to basket chains. Additionally, there were task dependent differences in WBV exposures. During the driving task, the z-axis (up and down) was the predominant exposure; the plowing task had a more even distribution of exposure across all three axes; while during scooping and dumping task, the x-axis (fore and aft) had the highest WBV exposures. The GPS data indicated that there were significant speed differences across tasks but not between the basket and ladder chain conditions. Tires with ladder chains increased the front-end loader operators' exposure to WBV above the ISO 2631-1 recommended eight hour action limit increasing risk for adverse health effects. Although more expensive, basket chains are recommended over ladder chains since they substantially lowered the front-end loader operator's exposures and may ultimately reduce vibration related wear and tear on the vehicle. In order to reduce a heavy equipment vehicle (HEV) operator's chances for developing low back pain, this study provides information that health and safety professionals can use to reduce whole-body vibration (WBV) exposures when operating front-end wheel loaders with traction chains. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Energy Supply- Production of Fuel from Agricultural and Animal Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabriel Miller

2009-03-25

The Society for Energy and Environmental Research (SEER) was funded in March 2004 by the Department of Energy, under grant DE-FG-36-04GO14268, to produce a study, and oversee construction and implementation, for the thermo-chemical production of fuel from agricultural and animal waste. The grant focuses on the Changing World Technologies (CWT) of West Hempstead, NY, thermal conversion process (TCP), which converts animal residues and industrial food processing biproducts into fuels, and as an additional product, fertilizers. A commercial plant was designed and built by CWT, partially using grant funds, in Carthage, Missouri, to process animal residues from a nearby turkey processingmore » plant. The DOE sponsored program consisted of four tasks. These were: Task 1 Optimization of the CWT Plant in Carthage - This task focused on advancing and optimizing the process plant operated by CWT that converts organic waste to fuel and energy. Task 2 Characterize and Validate Fuels Produced by CWT - This task focused on testing of bio-derived hydrocarbon fuels from the Carthage plant in power generating equipment to determine the regulatory compliance of emissions and overall performance of the fuel. Task 3 Characterize Mixed Waste Streams - This task focused on studies performed at Princeton University to better characterize mixed waste incoming streams from animal and vegetable residues. Task 4 Fundamental Research in Waste Processing Technologies - This task focused on studies performed at the Massachusetts Institute of Technology (MIT) on the chemical reformation reaction of agricultural biomass compounds in a hydrothermal medium. Many of the challenges to optimize, improve and perfect the technology, equipment and processes in order to provide an economically viable means of creating sustainable energy were identified in the DOE Stage Gate Review, whose summary report was issued on July 30, 2004. This summary report appears herein as Appendix 1, and the findings of the report formed the basis for much of the subsequent work under the grant. An explanation of the process is presented as well as the completed work on the four tasks.« less

Working principle and application of magnetic separation for biomedical diagnostic at high- and low-field gradients.

PubMed

Leong, Sim Siong; Yeap, Swee Pin; Lim, JitKang

2016-12-06

Magnetic separation is a versatile technique used in sample preparation for diagnostic purpose. For such application, an external magnetic field is applied to drive the separation of target entity (e.g. bacteria, viruses, parasites and cancer cells) from a complex raw sample in order to ease the subsequent task(s) for disease diagnosis. This separation process not only can be achieved via the utilization of high magnetic field gradient, but also, in most cases, low magnetic field gradient with magnitude less than 100 T m -1 is equally feasible. It is the aim of this review paper to summarize the usage of both high gradient magnetic separation and low gradient magnetic separation (LGMS) techniques in this area of research. It is noteworthy that effectiveness of the magnetic separation process not only determines the outcome of a diagnosis but also directly influences its accuracy as well as sensing time involved. Therefore, understanding the factors that simultaneously influence the efficiency of both magnetic separation process and target detection is necessary. Moreover, for LGMS, there are several important considerations that should be taken into account in order to ensure its successful implementation. Hence, this review paper aims to provide an overview to relate all this crucial information by linking the magnetic separation theory to biomedical diagnostic applications.

Texture variations suppress suprathreshold brightness and colour variations.

PubMed

Schofield, Andrew J; Kingdom, Frederick A A

2014-01-01

Discriminating material changes from illumination changes is a key function of early vision. Luminance cues are ambiguous in this regard, but can be disambiguated by co-incident changes in colour and texture. Thus, colour and texture are likely to be given greater prominence than luminance for object segmentation, and better segmentation should in turn produce stronger grouping. We sought to measure the relative strengths of combined luminance, colour and texture contrast using a suprathreshhold, psychophysical grouping task. Stimuli comprised diagonal grids of circular patches bordered by a thin black line and contained combinations of luminance decrements with either violet, red, or texture increments. There were two tasks. In the Separate task the different cues were presented separately in a two-interval design, and participants indicated which interval contained the stronger orientation structure. In the Combined task the cues were combined to produce competing orientation structure in a single image. Participants had to indicate which orientation, and therefore which cue was dominant. Thus we established the relative grouping strength of each cue pair presented separately, and compared this to their relative grouping strength when combined. In this way we observed suprathreshold interactions between cues and were able to assess cue dominance at ecologically relevant signal levels. Participants required significantly more luminance and colour compared to texture contrast in the Combined compared to Separate conditions (contrast ratios differed by about 0.1 log units), showing that suprathreshold texture dominates colour and luminance when the different cues are presented in combination.

Measurement instruments to assess posture, gait, and balance in Parkinson's disease: Critique and recommendations.

PubMed

Bloem, Bastiaan R; Marinus, Johan; Almeida, Quincy; Dibble, Lee; Nieuwboer, Alice; Post, Bart; Ruzicka, Evzen; Goetz, Christopher; Stebbins, Glenn; Martinez-Martin, Pablo; Schrag, Anette

2016-09-01

Disorders of posture, gait, and balance in Parkinson's disease (PD) are common and debilitating. This MDS-commissioned task force assessed clinimetric properties of existing rating scales, questionnaires, and timed tests that assess these features in PD. A literature review was conducted. Identified instruments were evaluated systematically and classified as "recommended," "suggested," or "listed." Inclusion of rating scales was restricted to those that could be used readily in clinical research and practice. One rating scale was classified as "recommended" (UPDRS-derived Postural Instability and Gait Difficulty score) and 2 as "suggested" (Tinetti Balance Scale, Rating Scale for Gait Evaluation). Three scales requiring equipment (Berg Balance Scale, Mini-BESTest, Dynamic Gait Index) also fulfilled criteria for "recommended" and 2 for "suggested" (FOG score, Gait and Balance Scale). Four questionnaires were "recommended" (Freezing of Gait Questionnaire, Activities-specific Balance Confidence Scale, Falls Efficacy Scale, Survey of Activities, and Fear of Falling in the Elderly-Modified). Four tests were classified as "recommended" (6-minute and 10-m walk tests, Timed Up-and-Go, Functional Reach). We identified several questionnaires that adequately assess freezing of gait and balance confidence in PD and a number of useful clinical tests. However, most clinical rating scales for gait, balance, and posture perform suboptimally or have been evaluated insufficiently. No instrument comprehensively and separately evaluates all relevant PD-specific gait characteristics with good clinimetric properties, and none provides separate balance and gait scores with adequate content validity for PD. We therefore recommend the development of such a PD-specific, easily administered, comprehensive gait and balance scale that separately assesses all relevant constructs. © 2016 International Parkinson and Movement Disorder Society. © 2016 International Parkinson and Movement Disorder Society.

Alternative Fuels Compatibility with Army Equipment Testing-Effects of JP-8+100 on Military Filtration Equipment

DTIC Science & Technology

2012-02-21

Summary of Proposed Additive Packages for API /IP 1581 4th Edition ...................................... 4 Table 2. Summary of DoD Test Results...15 Table 8. ISO 4406 Cleanliness Codes for the API /IP 1581 5th Edition...Improver WSIM Water Separation Index Measure NSN National Stock Number API American Petroleum Institute DESC Defense Energy Support Center DOE Design of

Flight Experiment Investigation of General Aviation Self-Separation and Sequencing Tasks

NASA Technical Reports Server (NTRS)

Murdoch, Jennifer L.; Ramiscal, Ermin R.; McNabb, Jennifer L.; Bussink, Frank J. L.

2005-01-01

A new flight operations concept called Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) was developed to increase capacity during Instrument Meteorological Conditions (IMC) at non-towered, non-radar airports by enabling concurrent operations of multiple aircraft. One aspect of this concept involves having pilots safely self-separate from other aircraft during approaches into these airports using appropriate SATS HVO procedures. A flight experiment was conducted to determine if instrument-rated general aviation (GA) pilots could self-separate and sequence their ownship aircraft, while following a simulated aircraft, into a non-towered, non-radar airport during simulated IMC. Six GA pilots' workload levels and abilities to perform self-separation and sequencing procedures while flying a global positioning system (GPS) instrument approach procedure were examined. The results showed that the evaluation pilots maintained at least the minimum specified separation between their ownship aircraft and simulated traffic and maintained their assigned landing sequence 100-percent of the time. Neither flight path deviations nor subjective workload assessments were negatively impacted by the additional tasks of self-separating and sequencing during these instrument approaches.

Lewis hybrid computing system, users manual

NASA Technical Reports Server (NTRS)

Bruton, W. M.; Cwynar, D. S.

1979-01-01

The Lewis Research Center's Hybrid Simulation Lab contains a collection of analog, digital, and hybrid (combined analog and digital) computing equipment suitable for the dynamic simulation and analysis of complex systems. This report is intended as a guide to users of these computing systems. The report describes the available equipment' and outlines procedures for its use. Particular is given to the operation of the PACER 100 digital processor. System software to accomplish the usual digital tasks such as compiling, editing, etc. and Lewis-developed special purpose software are described.

Proceedings of the Ship Production Symposium, held in New Orleans, Louisiana, on 2-4 September 1992

DTIC Science & Technology

1992-09-01

that enables an observer to experience an environment or a task by means of visual, auditory , and sensory simulation (50). The equipment includes a... auditory images. Less progress has been made on general-purpose tactile sensory response equipment. Quasi-realistic graphical output has already helped in...The second is the United States of America funding was earmarked for a U. S. yard to help stimulate the U.S. economy. In essence, the RSV

Yaw rate control of an air bearing vehicle

NASA Technical Reports Server (NTRS)

Walcott, Bruce L.

1989-01-01

The results of a 6 week project which focused on the problem of controlling the yaw (rotational) rate the air bearing vehicle used on NASA's flat floor facility are summarized. Contained within is a listing of the equipment available for task completion and an evaluation of the suitability of this equipment. The identification (modeling) process of the air bearing vehicle is detailed as well as the subsequent closed-loop control strategy. The effectiveness of the solution is discussed and further recommendations are included.

Shuttle payload interface verification equipment study. Volume 2: Technical document, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The technical analysis is reported that was performed during the shuttle payload interface verification equipment study. It describes: (1) the background and intent of the study; (2) study approach and philosophy covering all facets of shuttle payload/cargo integration; (3)shuttle payload integration requirements; (4) preliminary design of the horizontal IVE; (5) vertical IVE concept; and (6) IVE program development plans, schedule and cost. Also included is a payload integration analysis task to identify potential uses in addition to payload interface verification.

Wideband Communications Equipment, Ground Radio Communication, Space Comm Systems Equipment. 304X0/X4/X6. Appendix A - Task Analysis

DTIC Science & Technology

1990-05-01

ALARM LAMPS A CHECK TWT POWER SUPPLY VOLTAGE AND CURRENT A ADJUST POWER ALARM THRESHOLD AND TRANSMITTER OUTPUT A CHECK HELIX MONITOR K INTERPRET AN/FRC...POWER SUPPLY A CHECK TRAVELING WAVE TUBE ( TWT ) POWER SUPPLY HELIX CURRENT AND BEAM CURRENT A CHECK TWT RF POWER OUTPUT A CHECK TRANSMITTER POWER...A ADJUST TRANSMITTER LINEARITY A CALIBRATE TRANSMIT DEVIATION AND ADJUST MODULATION AMPLIFIER A ADJUST TWT PERFORMANCE MONITOR A ADJUST TWT OUTPUT

Illinois high-speed rail four-quadrant gate reliability assessment

DOT National Transportation Integrated Search

2009-10-01

The Federal Railroad Administration (FRA) tasked the John A. Volpe National Transportation Systems Center (Volpe Center) to conduct a reliability analysis of the four-quadrant gate/vehicle detection equipment installed on the future high-speed rail (...

Collision Scenarios for Assessing Crashworthiness of Passenger Rail Equipment

DOT National Transportation Integrated Search

2010-10-12

In June 2009, at the request of the Federal Railroad Administration (FRA), the Railroad Safety Advisory Committee established the Engineering Task Force (ETF). The ETF is comprised of government, railroads, suppliers, and labor organizations and thei...

Habitability Designs for Crew Exploration Vehicle

NASA Technical Reports Server (NTRS)

Woolford, Barbara

2006-01-01

NASA's space human factors team is contributing to the habitability of the Crew Exploration Vehicle (CEV), which will take crews to low Earth orbit, and dock there with additional vehicles to go on to the moon's surface. They developed a task analysis for operations and for self-sustenance (sleeping, eating, hygiene), and estimated the volumes required for performing the various tasks and for the associated equipment, tools and supplies. Rough volumetric mockups were built for crew evaluations. Trade studies were performed to determine the size and location of windows. The habitability analysis also contributes to developing concepts of operations by identifying constraints on crew time. Recently completed studies provided stowage concepts, tools for assessing lighting constraints, and approaches to medical procedure development compatible with the tight space and absence of gravity. New work will be initiated to analyze design concepts and verify that equipment and layouts do meet requirements.

User Interaction with the CNPC Link

NASA Technical Reports Server (NTRS)

Hobbs, Alan; Lyall, Elizabeth A.

2014-01-01

As part of NASAs UAS in the NAS project, human factor guidelines are being developed for the ground control station of unmanned aircraft systems. A critical task for the pilot of a UAS is the management and control of the terrestrial radio links used to provide control of the vehicle and relay communications with air traffic control. An analysis of the task of the UAS pilot has been conducted to identify areas where guidelines are required. This analysis has identified a set of information requirements that must be supported by the radio equipment used to provide Control and Non-payload Communication (CNPC). Key requirements include the need for an alert when the link is lost, information on the current quality and latency of the link, and information to enable the future quality of the link to be anticipated as the aircraft changes location. These identified requirements can assist in the development of minimum operational performance standards for CNPC equipment.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 crew members look at the tiles underneath Atlantis. From left (in flight suits) are Mission Specialists Stephen Robinson and Andy Thomas, Commander Eileen Collins and, at right, Mission Specialist Soichi Noguchi, who is with the Japan Aerospace Exploration Agency, JAXA. Accompanying them is Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 crew members look at the tiles underneath Atlantis. From left (in flight suits) are Mission Specialists Stephen Robinson and Andy Thomas, Commander Eileen Collins and, at right, Mission Specialist Soichi Noguchi, who is with the Japan Aerospace Exploration Agency, JAXA. Accompanying them is Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 crew members look at the tiles underneath Atlantis. From center, left to right (in uniform), are Pilot James Kelly, Mission Specialist Soichi Noguchi, Mission Specialists Wendy Lawrence and Stephen Robinson. Accompanying them at left Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 crew members look at the tiles underneath Atlantis. From center, left to right (in uniform), are Pilot James Kelly, Mission Specialist Soichi Noguchi, Mission Specialists Wendy Lawrence and Stephen Robinson. Accompanying them at left Glenda Laws, EVA Task Leader, with United Space Alliance at Johnson Space Center. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

EMMA: The expert system for munition maintenance

NASA Technical Reports Server (NTRS)

Mullins, Barry E.

1988-01-01

Expert Missile Maintenance Aid (EMMA) is a first attempt to enhance maintenance of the tactical munition at the field and depot level by using artificial intelligence (AI) techniques. The ultimate goal of EMMA is to help a novice maintenance technician isolate and diagnose electronic, electromechanical, and mechanical equipment faults to the board/chassis level more quickly and consistently than the best human expert using the best currently available automatic test equipment (ATE). To this end, EMMA augments existing ATE with an expert system that captures the knowledge of design and maintenance experts. The EMMA program is described, including the evaluation of field-level expert system prototypes, the description of several study tasks performed during EMMA, and future plans for a follow-on program. This paper will briefly address several study tasks performed during EMMA. The paper concludes with a discussion of future plans for a follow-on program and other areas of concern.

Space spider crane

NASA Technical Reports Server (NTRS)

Macconochie, Ian O. (Inventor); Mikulas, Martin M., Jr. (Inventor); Pennington, Jack E. (Inventor); Kinkead, Rebecca L. (Inventor); Bryan, Charles F., Jr. (Inventor)

1988-01-01

A space spider crane for the movement, placement, and or assembly of various components on or in the vicinity of a space structure is described. As permanent space structures are utilized by the space program, a means will be required to transport cargo and perform various repair tasks. A space spider crane comprising a small central body with attached manipulators and legs fulfills this requirement. The manipulators may be equipped with constant pressure gripping end effectors or tools to accomplish various repair tasks. The legs are also equipped with constant pressure gripping end effectors to grip the space structure. Control of the space spider crane may be achieved either by computer software or a remotely situated human operator, who maintains visual contact via television cameras mounted on the space spider crane. One possible walking program consists of a parallel motion walking program whereby the small central body alternatively leans forward and backward relative to end effectors.

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

Reserve Officer Program

DTIC Science & Technology

1992-01-01

few went beyond the survey instrument to provide additional information. The surveys indicated a consensus among departments in the areas of policy ...uniforms, equipment, and weapons. All departments required their reserves to adhere to the policies and procedures that governed their regular...officers. Some agencies maintained separate policies on the operation and organization of their reserve force separate from that of the regular department

On the reduction of dynamic loads during actuation of separation devices of advanced orbital astrophysical observatories

NASA Astrophysics Data System (ADS)

Efanov, V. V.; Birukov, A. S.; Demenko, O. G.

2014-12-01

The paper gives a brief description of pyromechanical and detonation devices separating spacecraft (SC) from the upper stage. Causes of significant shock loads in the design and equipment are explained. Technical solutions to reduce these loads implemented in future SC using the mechanism of gas-dynamic and mechanical damping are described.

Shuttle/TDRSS Ku-band downlink study

NASA Technical Reports Server (NTRS)

Meyer, R.

1976-01-01

Assessing the adequacy of the baseline signal design approach, developing performance specifications for the return link hardware, and performing detailed design and parameter optimization tasks was accomplished by completing five specific study tasks. The results of these tasks show that the basic signal structure design is sound and that the goals can be met. Constraints placed on return link hardware by this structure allow reasonable specifications to be written so that no extreme technical risk areas in equipment design are foreseen. A third channel can be added to the PM mode without seriously degrading the other services. The feasibility of using only a PM mode was shown to exist, however, this will require use of some digital TV transmission techniques. Each task and its results are summarized.

LDA merging and splitting with applications to multiagent cooperative learning and system alteration.

PubMed

Pang, Shaoning; Ban, Tao; Kadobayashi, Youki; Kasabov, Nikola K

2012-04-01

To adapt linear discriminant analysis (LDA) to real-world applications, there is a pressing need to equip it with an incremental learning ability to integrate knowledge presented by one-pass data streams, a functionality to join multiple LDA models to make the knowledge sharing between independent learning agents more efficient, and a forgetting functionality to avoid reconstruction of the overall discriminant eigenspace caused by some irregular changes. To this end, we introduce two adaptive LDA learning methods: LDA merging and LDA splitting. These provide the benefits of ability of online learning with one-pass data streams, retained class separability identical to the batch learning method, high efficiency for knowledge sharing due to condensed knowledge representation by the eigenspace model, and more preferable time and storage costs than traditional approaches under common application conditions. These properties are validated by experiments on a benchmark face image data set. By a case study on the application of the proposed method to multiagent cooperative learning and system alternation of a face recognition system, we further clarified the adaptability of the proposed methods to complex dynamic learning tasks.

7 CFR 3300.34 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT Procedures for Separate Testing of Mechanical Refrigerating Appliances § 3300.34 General. ATP, Annex 1, Appendix 2...

7 CFR 3300.34 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT Procedures for Separate Testing of Mechanical Refrigerating Appliances § 3300.34 General. ATP, Annex 1, Appendix 2...

7 CFR 3300.34 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT Procedures for Separate Testing of Mechanical Refrigerating Appliances § 3300.34 General. ATP, Annex 1, Appendix 2...

7 CFR 3300.34 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT Procedures for Separate Testing of Mechanical Refrigerating Appliances § 3300.34 General. ATP, Annex 1, Appendix 2...

7 CFR 3300.34 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT Procedures for Separate Testing of Mechanical Refrigerating Appliances § 3300.34 General. ATP, Annex 1, Appendix 2...

Using ``Student Technology'' in Introductory Physics: A Comparison of Three Tools to Study Falling Objects

NASA Astrophysics Data System (ADS)

Saraiva da Rocha, Fábio; Fajardo, Fabio; Grisolía, Maricarmen; Benegas, Julio; Tchitnga, Robert; Laws, Priscilla

2011-03-01

Being able to facilitate effective hands-on laboratory experiences in introductory physics courses is a challenging task, even when contemporary laboratory facilities, equipment, and new technologies for data collection and analysis are available. At institutions without adequate resources, especially those in developing countries, we have found that the problem of providing effective laboratory experiences is especially daunting for at least two reasons: 1) the lack of equipment and contemporary measuring devices; and 2) even at institutions that have some laboratory equipment, students who have access to cell phones with digital timing and video capabilities or inexpensive digital cameras are bored with trying to use "old-fashioned" apparatus for measurements.

If this then that: an introduction to automated task services.

PubMed

Hoy, Matthew B

2015-01-01

This article explores automated task services, a type of website that allows users to create rules that are triggered by activity on one website and perform a task on another site. The most well-known automated task service is If This Then That (IFTTT), but recently a large number of these services have sprung up. These services can be used to connect websites, apps, business services, and even devices such as phones and home automation equipment. This allows for millions of possible combinations of rules, triggers, and actions. Librarians can put these services to use in many ways, from automating social media postings to remembering to bring their umbrella when rain is in the forecast. A list of popular automated task services is included, as well as a number of ideas for using these services in libraries.

Cooperative mission execution and planning

NASA Astrophysics Data System (ADS)

Flann, Nicholas S.; Saunders, Kevin S.; Pells, Larry

1998-08-01

Utilizing multiple cooperating autonomous vehicles to perform tasks enhances robustness and efficiency over the use of a single vehicle. Furthermore, because autonomous vehicles can be controlled precisely and their status known accurately in real time, new types of cooperative behaviors are possible. This paper presents a working system called MEPS that plans and executes missions for multiple autonomous vehicles in large structured environments. Two generic spatial tasks are supported, to sweep an area and to visit a location while activating on-board equipment. Tasks can be entered both initially by the user and dynamically during mission execution by both users and vehicles. Sensor data and task achievement data is shared among the vehicles enabling them to cooperatively adapt to changing environmental, vehicle and tasks conditions. The system has been successfully applied to control ATV and micro-robotic vehicles in precision agriculture and waste-site characterization environments.

Property-close source separation of hazardous waste and waste electrical and electronic equipment--a Swedish case study.

PubMed

Bernstad, Anna; la Cour Jansen, Jes; Aspegren, Henrik

2011-03-01

Through an agreement with EEE producers, Swedish municipalities are responsible for collection of hazardous waste and waste electrical and electronic equipment (WEEE). In most Swedish municipalities, collection of these waste fractions is concentrated to waste recycling centres where households can source-separate and deposit hazardous waste and WEEE free of charge. However, the centres are often located on the outskirts of city centres and cars are needed in order to use the facilities in most cases. A full-scale experiment was performed in a residential area in southern Sweden to evaluate effects of a system for property-close source separation of hazardous waste and WEEE. After the system was introduced, results show a clear reduction in the amount of hazardous waste and WEEE disposed of incorrectly amongst residual waste or dry recyclables. The systems resulted in a source separation ratio of 70 wt% for hazardous waste and 76 wt% in the case of WEEE. Results show that households in the study area were willing to increase source separation of hazardous waste and WEEE when accessibility was improved and that this and similar collection systems can play an important role in building up increasingly sustainable solid waste management systems. Copyright © 2010 Elsevier Ltd. All rights reserved.

Supervisory Control Information Management Research (SCIMR) Studies: Determination of Efficiency for a Variety of Input Control Equipment (DEVICE)

DTIC Science & Technology

2010-08-01

Belkin n52te, the Saitek Cyborg Command Unit, the Wacom Bamboo Fun with stylus, the Wacom Bamboo Fun with touch, and the Xbox 360 controller...4 4 Saitek Cyborg Command Unit function mapping ....................................... 4 iv 5 Wacom Bamboo Fun with stylus and touch...versus Belkin n52te by task . 30 B-2 Participants’ preferences for standard mouse versus Saitek Cyborg Command Unit by task

Human Engineering Modeling and Performance Lab Study Project

NASA Technical Reports Server (NTRS)

Oliva-Buisson, Yvette J.

2014-01-01

The HEMAP (Human Engineering Modeling and Performance) Lab is a joint effort between the Industrial and Human Engineering group and the KAVE (Kennedy Advanced Visualiations Environment) group. The lab consists of sixteen camera system that is used to capture human motions and operational tasks, through te use of a Velcro suit equipped with sensors, and then simulate these tasks in an ergonomic software package know as Jac, The Jack software is able to identify the potential risk hazards.

Effects of Selected Task Performance Criteria at Initiating Adaptive Task Real locations

NASA Technical Reports Server (NTRS)

Montgomery, Demaris A.

2001-01-01

In the current report various performance assessment methods used to initiate mode transfers between manual control and automation for adaptive task reallocation were tested. Participants monitored two secondary tasks for critical events while actively controlling a process in a fictional system. One of the secondary monitoring tasks could be automated whenever operators' performance was below acceptable levels. Automation of the secondary task and transfer of the secondary task back to manual control were either human- or machine-initiated. Human-initiated transfers were based on the operator's assessment of the current task demands while machine-initiated transfers were based on the operators' performance. Different performance assessment methods were tested in two separate experiments.

Titan 3E/Centaur D-1T Systems Summary

NASA Technical Reports Server (NTRS)

1973-01-01

A systems and operational summary of the Titan 3E/Centaur D-1T program is presented which describes vehicle assembly facilities, launch facilities, and management responsibilities, and also provides detailed information on the following separate systems: (1) mechanical systems, including structural components, insulation, propulsion units, reaction control, thrust vector control, hydraulic systems, and pneumatic equipment; (2) astrionics systems, such as instrumentation and telemetry, navigation and guidance, C-Band tracking system, and range safety command system; (3) digital computer unit software; (4) flight control systems; (5) electrical/electronic systems; and (6) ground support equipment, including checkout equipment.

ELEVATING MECHANISM

DOEpatents

Frederick, H.S.; Kinsella, M.A.

1959-02-24

An elevator is described, which is arranged for movement both in a horizontal and in a vertical direction so that the elevating mechanism may be employed for servicing equipment at separated points in a plant. In accordance with the present invention, the main elevator chassis is suspended from a monorail. The chassis, in turn supports a vertically moveable carriage, a sub- carriage vertically moveable on the carriage, and a turntable carried by the sub- carriage and moveable through an arc of 90 with the equipment attached thereto. In addition, the chassis supports all the means required to elevate or rotate the equipment.

Memory Systems Do Not Divide on Consciousness: Reinterpreting Memory in Terms of Activation and Binding

PubMed Central

Reder, Lynne M.; Park, Heekyeong; Kieffaber, Paul D.

2009-01-01

There is a popular hypothesis that performance on implicit and explicit memory tasks reflects 2 distinct memory systems. Explicit memory is said to store those experiences that can be consciously recollected, and implicit memory is said to store experiences and affect subsequent behavior but to be unavailable to conscious awareness. Although this division based on awareness is a useful taxonomy for memory tasks, the authors review the evidence that the unconscious character of implicit memory does not necessitate that it be treated as a separate system of human memory. They also argue that some implicit and explicit memory tasks share the same memory representations and that the important distinction is whether the task (implicit or explicit) requires the formation of a new association. The authors review and critique dissociations from the behavioral, amnesia, and neuroimaging literatures that have been advanced in support of separate explicit and implicit memory systems by highlighting contradictory evidence and by illustrating how the data can be accounted for using a simple computational memory model that assumes the same memory representation for those disparate tasks. PMID:19210052

Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Pilot-Scale Test Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gary M. Blythe

2006-03-01

This Topical Report summarizes progress on Cooperative Agreement DE-FC26-04NT42309, ''Field Testing of a Wet FGD Additive.'' The objective of the project is to demonstrate the use of a flue gas desulfurization (FGD) additive, Degussa Corporation's TMT-15, to prevent the reemissions of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project intends to demonstrate that the additive can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine TMT salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal.more » The project will conduct pilot and full-scale tests of the TMT-15 additive in wet FGD absorbers. The tests are intended to determine required additive dosage requirements to prevent Hg{sup 0} reemissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Power River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, TXU Generation Company LP, Southern Company, and Degussa Corporation. TXU Generation has provided the Texas lignite/PRB co-fired test site for pilot FGD tests, Monticello Steam Electric Station Unit 3. Southern Company is providing the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, as well as the pilot and full-scale jet bubbling reactor (JBR) FGD systems to be tested. A third utility, to be named later, will provide the high-sulfur Eastern bituminous coal full-scale FGD test site. Degussa Corporation is providing the TMT-15 additive and technical support to the test program. The project is being conducted in six tasks. Of the six project tasks, Task 1 involves project planning and Task 6 involves management and reporting. The other four tasks involve field testing on FGD systems, either at pilot or full scale. The four tasks include: Task 2 - Pilot Additive Testing in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High Sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. This topical report presents the results from the Task 2 and Task 4 pilot-scale additive tests. The Task 3 and Task 5 full-scale additive tests will be conducted later in calendar year 2006.« less

PROCRU: A model for analyzing flight crew procedures in approach to landing

NASA Technical Reports Server (NTRS)

Baron, S.; Zacharias, G.; Muraidharan, R.; Lancraft, R.

1982-01-01

A model for the human performance of approach and landing tasks that would provide a means for systematic exploration of questions concerning the impact of procedural and equipment design and the allocation of resources in the cockpit on performance and safety in approach-to-landing is discussed. A system model is needed that accounts for the interactions of crew, procedures, vehicle, approach geometry, and environment. The issues of interest revolve principally around allocation of tasks in the cockpit and crew performance with respect to the cognitive aspects of the tasks. The model must, therefore, deal effectively with information processing and decision-making aspects of human performance.

Spatial release of cognitive load measured in a dual-task paradigm in normal-hearing and hearing-impaired listeners.

PubMed

Xia, Jing; Nooraei, Nazanin; Kalluri, Sridhar; Edwards, Brent

2015-04-01

This study investigated whether spatial separation between talkers helps reduce cognitive processing load, and how hearing impairment interacts with the cognitive load of individuals listening in multi-talker environments. A dual-task paradigm was used in which performance on a secondary task (visual tracking) served as a measure of the cognitive load imposed by a speech recognition task. Visual tracking performance was measured under four conditions in which the target and the interferers were distinguished by (1) gender and spatial location, (2) gender only, (3) spatial location only, and (4) neither gender nor spatial location. Results showed that when gender cues were available, a 15° spatial separation between talkers reduced the cognitive load of listening even though it did not provide further improvement in speech recognition (Experiment I). Compared to normal-hearing listeners, large individual variability in spatial release of cognitive load was observed among hearing-impaired listeners. Cognitive load was lower when talkers were spatially separated by 60° than when talkers were of different genders, even though speech recognition was comparable in these two conditions (Experiment II). These results suggest that a measure of cognitive load might provide valuable insight into the benefit of spatial cues in multi-talker environments.

Continued evaluation of pothole patching equipment, materials, and processes.

DOT National Transportation Integrated Search

2014-06-14

After the deaths of two Caltrans workers who were patching potholes in 2006-2007, Caltrans tasked the Advanced Highway Maintenance and Construction Technology (AHMCT) Research Center with developing a safer and more efficient means of patching pothol...

GPHS-RTG's in support of the Cassini mission

NASA Astrophysics Data System (ADS)

1993-10-01

The following tasks were reported: Spacecraft integration and liaison; engineering support; safety; qualified unicouple fabrication; ETG fabrication/assembly/test; ground support equipment; RTG shipping and launch support; designs/reviews/mission applications; and project management/quality assurance/contract changes.

Infrastructure for deployment of power systems

NASA Technical Reports Server (NTRS)

Sprouse, Kenneth M.

1991-01-01

A preliminary effort in characterizing the types of stationary lunar power systems which may be considered for emplacement on the lunar surface from the proposed initial 100-kW unit in 2003 to later units ranging in power from 25 to 825 kW is presented. Associated with these power systems are their related infrastructure hardware including: (1) electrical cable, wiring, switchgear, and converters; (2) deployable radiator panels; (3) deployable photovoltaic (PV) panels; (4) heat transfer fluid piping and connection joints; (5) power system instrumentation and control equipment; and (6) interface hardware between lunar surface construction/maintenance equipment and power system. This report: (1) presents estimates of the mass and volumes associated with these power systems and their related infrastructure hardware; (2) provides task breakdown description for emplacing this equipment; (3) gives estimated heat, forces, torques, and alignment tolerances for equipment assembly; and (4) provides other important equipment/machinery requirements where applicable. Packaging options for this equipment will be discussed along with necessary site preparation requirements. Design and analysis issues associated with the final emplacement of this power system hardware are also described.

Enhancing performance of a motor imagery based brain-computer interface by incorporating electrical stimulation-induced SSSEP

NASA Astrophysics Data System (ADS)

Yi, Weibo; Qiu, Shuang; Wang, Kun; Qi, Hongzhi; Zhao, Xin; He, Feng; Zhou, Peng; Yang, Jiajia; Ming, Dong

2017-04-01

Objective. We proposed a novel simultaneous hybrid brain-computer interface (BCI) by incorporating electrical stimulation into a motor imagery (MI) based BCI system. The goal of this study was to enhance the overall performance of an MI-based BCI. In addition, the brain oscillatory pattern in the hybrid task was also investigated. Approach. 64-channel electroencephalographic (EEG) data were recorded during MI, selective attention (SA) and hybrid tasks in fourteen healthy subjects. In the hybrid task, subjects performed MI with electrical stimulation which was applied to bilateral median nerve on wrists simultaneously. Main results. The hybrid task clearly presented additional steady-state somatosensory evoked potential (SSSEP) induced by electrical stimulation with MI-induced event-related desynchronization (ERD). By combining ERD and SSSEP features, the performance in the hybrid task was significantly better than in both MI and SA tasks, achieving a ~14% improvement in total relative to the MI task alone and reaching ~89% in mean classification accuracy. On the contrary, there was no significant enhancement obtained in performance while separate ERD feature was utilized in the hybrid task. In terms of the hybrid task, the performance using combined feature was significantly better than using separate ERD or SSSEP feature. Significance. The results in this work validate the feasibility of our proposed approach to form a novel MI-SSSEP hybrid BCI outperforming a conventional MI-based BCI through combing MI with electrical stimulation.

Thermophoretic separation of aerosol particles from a sampled gas stream

DOEpatents

Postma, A.K.

1984-09-07

This disclosure relates to separation of aerosol particles from gas samples withdrawn from within a contained atmosphere, such as containment vessels for nuclear reactors or other process equipment where remote gaseous sampling is required. It is specifically directed to separation of dense aerosols including particles of any size and at high mass loadings and high corrosivity. The United States Government has rights in this invention pursuant to Contract DE-AC06-76FF02170 between the US Department of Energy and Westinghouse Electric Corporation.

Dispensing Equipment Testing with Mid-Level Ethanol/Gasoline Test Fluid: Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyce, K.; Chapin, J. T.

The National Renewable Energy Laboratory's (NREL) Nonpetroleum-Based Fuel Task addresses the hurdles to commercialization of biomass-derived fuels and fuel blends. One such hurdle is the unknown compatibility of new fuels with current infrastructure, such as the equipment used at service stations to dispense fuel into automobiles. The U.S. Department of Energy's (DOE) Vehicle Technology Program and the Biomass Program have engaged in a joint project to evaluate the potential for blending ethanol into gasoline at levels higher than nominal 10 volume percent. This project was established to help DOE and NREL better understand any potentially adverse impacts caused by amore » lack of knowledge about the compatibility of the dispensing equipment with ethanol blends higher than what the equipment was designed to dispense. This report provides data about the impact of introducing a gasoline with a higher volumetric ethanol content into service station dispensing equipment from a safety and a performance perspective.« less

46 CFR 197.342 - Buoyancy-changing devices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... STANDARDS GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.342 Buoyancy-changing devices. (a...-changing device must have an inflation source separate from the breathing gas supply. ...

The effect of processing code, response modality and task difficulty on dual task performance and subjective workload in a manual system

NASA Technical Reports Server (NTRS)

Liu, Yili; Wickens, Christopher D.

1987-01-01

This paper reports on the first experiment of a series studying the effect of task structure and difficulty demand on time-sharing performance and workload in both automated and corresponding manual systems. The experimental task involves manual control time-shared with spatial and verbal decisions tasks of two levels of difficulty and two modes of response (voice or manual). The results provide strong evidence that tasks and processes competing for common processing resources are time shared less effecively and have higher workload than tasks competing for separate resources. Subjective measures and the structure of multiple resources are used in conjunction to predict dual task performance. The evidence comes from both single-task and from dual-task performance.

Stroop color-word interference and electroencephalogram activation: evidence for age-related decline of the anterior attention system.

PubMed

West, R; Bell, M A

1997-07-01

Groups of healthy, community-dwelling younger and older adults performed a Stroop task in which color and word could be congruent or incongruent and spatially integrated or separated. During the task, continuous electroencephalogram (EEG) was recorded from frontal, parietal, and occipital regions. The magnitude of the Stroop interference effect and task-related EEG activation was greater for older than younger adults when stimuli were integrated. This effect was significant over medial and lateral frontal and parietal, but not occipital, regions. In comparison, interference and EEG activation did not differ for younger and older adults when stimuli were separated. These findings support the hypothesis that the anterior attention system is more sensitive to the effects of increasing age than the posterior attention system.

Working principle and application of magnetic separation for biomedical diagnostic at high- and low-field gradients

PubMed Central

Yeap, Swee Pin; Lim, JitKang

2016-01-01

Magnetic separation is a versatile technique used in sample preparation for diagnostic purpose. For such application, an external magnetic field is applied to drive the separation of target entity (e.g. bacteria, viruses, parasites and cancer cells) from a complex raw sample in order to ease the subsequent task(s) for disease diagnosis. This separation process not only can be achieved via the utilization of high magnetic field gradient, but also, in most cases, low magnetic field gradient with magnitude less than 100 T m−1 is equally feasible. It is the aim of this review paper to summarize the usage of both high gradient magnetic separation and low gradient magnetic separation (LGMS) techniques in this area of research. It is noteworthy that effectiveness of the magnetic separation process not only determines the outcome of a diagnosis but also directly influences its accuracy as well as sensing time involved. Therefore, understanding the factors that simultaneously influence the efficiency of both magnetic separation process and target detection is necessary. Moreover, for LGMS, there are several important considerations that should be taken into account in order to ensure its successful implementation. Hence, this review paper aims to provide an overview to relate all this crucial information by linking the magnetic separation theory to biomedical diagnostic applications. PMID:27920891

Selective attention to perceptual dimensions and switching between dimensions.

PubMed

Meiran, Nachshon; Dimov, Eduard; Ganel, Tzvi

2013-02-01

In the present experiments, the question being addressed was whether switching attention between perceptual dimensions and selective attention to dimensions are processes that compete over a common resource? Attention to perceptual dimensions is usually studied by requiring participants to ignore a never-relevant dimension. Selection failure (Garner's Interference, GI) is indicated by poorer performance in the filtering condition (when this dimension varies) as compared with baseline (when it is fixed). Switching between perceptual dimensions is usually studied with the task switching paradigm. In the present experiments, attention switching was manipulated by using single-task blocks and blocks in which participants switched between tasks or dimensions in reaction to task cues, and attention to dimensions was assessed by including a third, never-relevant dimension that was either fixed or varied randomly. In Experiments 1 (long cue-target interval, CTI) and 2 (short CTI), the tasks involved shape and color and the never-relevant dimension (texture) was chosen to be separable from them. In Experiments 3 (long CTI) and 4 (short CTI), the tasks involved shape and brightness and the never-relevant dimension, saturation, was chosen to be separable from shape and integral with brightness. Task switching did not generate GI but a short CTI did. Thus, switching and filtering generally do not compete over central limited resources unless under tight time pressure. Experiment 3 shows GI in the brightness task but not in the shape task, suggesting that participants switched their attention between brightness and shape when they switched tasks. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Perceptual learning improves contrast sensitivity, visual acuity, and foveal crowding in amblyopia.

PubMed

Barollo, Michele; Contemori, Giulio; Battaglini, Luca; Pavan, Andrea; Casco, Clara

2017-01-01

Amblyopic observers present abnormal spatial interactions between a low-contrast sinusoidal target and high-contrast collinear flankers. It has been demonstrated that perceptual learning (PL) can modulate these low-level lateral interactions, resulting in improved visual acuity and contrast sensitivity. We measured the extent and duration of generalization effects to various spatial tasks (i.e., visual acuity, Vernier acuity, and foveal crowding) through PL on the target's contrast detection. Amblyopic observers were trained on a contrast-detection task for a central target (i.e., a Gabor patch) flanked above and below by two high-contrast Gabor patches. The pre- and post-learning tasks included lateral interactions at different target-to-flankers separations (i.e., 2, 3, 4, 8λ) and included a range of spatial frequencies and stimulus durations as well as visual acuity, Vernier acuity, contrast-sensitivity function, and foveal crowding. The results showed that perceptual training reduced the target's contrast-detection thresholds more for the longest target-to-flanker separation (i.e., 8λ). We also found generalization of PL to different stimuli and tasks: contrast sensitivity for both trained and untrained spatial frequencies, visual acuity for Sloan letters, and foveal crowding, and partially for Vernier acuity. Follow-ups after 5-7 months showed not only complete maintenance of PL effects on visual acuity and contrast sensitivity function but also further improvement in these tasks. These results suggest that PL improves facilitatory lateral interactions in amblyopic observers, which usually extend over larger separations than in typical foveal vision. The improvement in these basic visual spatial operations leads to a more efficient capability of performing spatial tasks involving high levels of visual processing, possibly due to the refinement of bottom-up and top-down networks of visual areas.

Infrastructure for Integration of Legacy Electrical Equipment into a Smart-Grid Using Wireless Sensor Networks.

PubMed

de Araújo, Paulo Régis C; Filho, Raimir Holanda; Rodrigues, Joel J P C; Oliveira, João P C M; Braga, Stephanie A

2018-04-24

At present, the standardisation of electrical equipment communications is on the rise. In particular, manufacturers are releasing equipment for the smart grid endowed with communication protocols such as DNP3, IEC 61850, and MODBUS. However, there are legacy equipment operating in the electricity distribution network that cannot communicate using any of these protocols. Thus, we propose an infrastructure to allow the integration of legacy electrical equipment to smart grids by using wireless sensor networks (WSNs). In this infrastructure, each legacy electrical device is connected to a sensor node, and the sink node runs a middleware that enables the integration of this device into a smart grid based on suitable communication protocols. This middleware performs tasks such as the translation of messages between the power substation control centre (PSCC) and electrical equipment in the smart grid. Moreover, the infrastructure satisfies certain requirements for communication between the electrical equipment and the PSCC, such as enhanced security, short response time, and automatic configuration. The paper’s contributions include a solution that enables electrical companies to integrate their legacy equipment into smart-grid networks relying on any of the above mentioned communication protocols. This integration will reduce the costs related to the modernisation of power substations.

Infrastructure for Integration of Legacy Electrical Equipment into a Smart-Grid Using Wireless Sensor Networks

PubMed Central

de Araújo, Paulo Régis C.; Filho, Raimir Holanda; Oliveira, João P. C. M.; Braga, Stephanie A.

2018-01-01

At present, the standardisation of electrical equipment communications is on the rise. In particular, manufacturers are releasing equipment for the smart grid endowed with communication protocols such as DNP3, IEC 61850, and MODBUS. However, there are legacy equipment operating in the electricity distribution network that cannot communicate using any of these protocols. Thus, we propose an infrastructure to allow the integration of legacy electrical equipment to smart grids by using wireless sensor networks (WSNs). In this infrastructure, each legacy electrical device is connected to a sensor node, and the sink node runs a middleware that enables the integration of this device into a smart grid based on suitable communication protocols. This middleware performs tasks such as the translation of messages between the power substation control centre (PSCC) and electrical equipment in the smart grid. Moreover, the infrastructure satisfies certain requirements for communication between the electrical equipment and the PSCC, such as enhanced security, short response time, and automatic configuration. The paper’s contributions include a solution that enables electrical companies to integrate their legacy equipment into smart-grid networks relying on any of the above mentioned communication protocols. This integration will reduce the costs related to the modernisation of power substations. PMID:29695099

Test Administrator's Handbook and Student Instructions for Job-Task Performance Tests for Doppler Radar, AN/APN-147 and its Computer AN/ASN-35, and Associated Test Equipment and Hand Tools. Report for June-December 1972.

ERIC Educational Resources Information Center

Matrix Research Co., Alexandria, VA.

The handbook covers a comprehensive series of Job-Task Performance Tests for the Doppler Radar (AN/APN) and its Associated Computer (AN/ASN-35). The test series has been developed to measure job performance of the electronic technician. These tests encompass all phases of day-to-day preventative and corrective maintenance that technicians are…

The Potential for Restructuring MOS (Military Occupational Specialties) Tasks to Reduce Physical Demand Requirements of Critical MOS

DTIC Science & Technology

1984-09-01

fitness training in the US Army (ARIEM T-5/79). Natick, MS: US Army Research Institute for Environental Medicine, August 1979, p 31. 6Vogel, Wright...Human engineering guide to equipment d (rev. ed.). Washington, DC: US Government Printing Office, 1972, pp 497, 512, 527., 2 2Vogel, Wright, & Patton...physical demands they make. Three of the interview questions addressed this issue . The questions were: "Are you tired after doing this task?" "Have

More Capable Warfighting Through Reduced Fuel Burden. The Defense Science Board Task Force on Improving Fuel Efficiency of Weapons Platforms

DTIC Science & Technology

2001-01-01

Date 00 Jan 2001 Report Type N/A Dates Covered (from... to) - Title and Subtitle The Defense Science Board Task Force on Improving Fuel Efficency ...equipment, people , facilities and other overhead costs) known, understood and factored into the cost of fuel, there would be proper visibility to focus...work- ES- 7 logistics shortfalls impose on operational commanders. Logistics should be played and when it breaks, wargamers must account for it rather

Hotline Complaint Regarding A Defense Contract Audit Agency Employee Conducting Private For-Profit Tax Business Activity on Government Time and Using Government Equipment

DTIC Science & Technology

2011-06-28

auditors that have private businesses from performing private business tasks on Government time while teleworking . • Contact the U.S. Department of the...profit businesses and telework to perform tasks associated with their private businesses on Government time. Although teleworking did not cause the... teleworking , it increases the vulnerability that an unethical employee will misuse Government time. DCAA employs approximately 4,000 auditors, which is more

Fleet/TYCOM Level Survey of Armament Handling Problems - Task One of the Naval Aviation Armament Support Equipment Program Management Study

DTIC Science & Technology

1977-06-21

7. AUTHOR(#) 6. CONTRACT OR GRANT NUMBER(#) PILA /UDERIAN 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT, TASK...mechanically complex (i.e. contains an internal combustion engine) and/or comes in direct support of the aircraft is managed and maintained by the AIMD. The...an internal combustion engine. Accordingly, only the Aero 33D/E Trailer, Aero 51B Trailer, 21A/C Bomb Skid, and Aero 47A Weapons Loader are maintained

RPMA (Real Property Maintenance Activities) Consolidation Activities in the National Capital Region. Volume 1. Main Report.

DTIC Science & Technology

1984-05-01

61[- ~%.- ~ * ’.. e. ,* .C . . -. . %~*, S . ** P~~ "’K . 5, FOREWORD This investigation was performed as a reimbursable project for the Hunts...Installation Overhead Rates to EA,CA Reimbursable Rates 102 **53 Comparison of Shop Costs 104 54 Cost of Equipment Acquisition (Replacement Value and Annual...B3 Task "C"--Develop the Detailed Financial Management Plan To Include Establishment of a Revolving Fund for Reimbursement 143 Z B4 Task "D"--Develop

Heat storage capability of a rolling cylinder using Glauber's salt

NASA Technical Reports Server (NTRS)

Herrick, C. S.; Zarnoch, K. P.

1980-01-01

The rolling cylinder phase change heat storage concept was developed to the point where a prototype design is completed and a cost analysis is prepared. A series of experimental and analytical tasks are defined to establish the thermal, mechanical, and materials behavior of rolling cylinder devices. These tasks include: analyses of internal and external heat transfer; performance and lifetime testing of the phase change materials; corrosion evaluation; development of a mathematical model; and design of a prototype and associated test equipment.